#
# Copyright 2017 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

#
# Common BoardConfig for all supported architectures.
#

# TODO(b/170639028): Back up TARGET_NO_BOOTLOADER
__TARGET_NO_BOOTLOADER := $(TARGET_NO_BOOTLOADER)
include build/make/target/board/BoardConfigMainlineCommon.mk
TARGET_NO_BOOTLOADER := $(__TARGET_NO_BOOTLOADER)

TARGET_BOOTLOADER_BOARD_NAME := cutf

BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE := $(TARGET_RO_FILE_SYSTEM_TYPE)

# Boot partition size: 32M
# This is only used for OTA update packages. The image size on disk
# will not change (as is it not a filesystem.)
BOARD_BOOTIMAGE_PARTITION_SIZE := 67108864
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 67108864
BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE := 67108864

# Build a separate vendor.img partition
BOARD_USES_VENDORIMAGE := true
BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := $(TARGET_RO_FILE_SYSTEM_TYPE)

BOARD_USES_METADATA_PARTITION := true

# Build a separate product.img partition
BOARD_USES_PRODUCTIMAGE := true
BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE := $(TARGET_RO_FILE_SYSTEM_TYPE)

# Build a separate system_ext.img partition
BOARD_USES_SYSTEM_EXTIMAGE := true
BOARD_SYSTEM_EXTIMAGE_FILE_SYSTEM_TYPE := $(TARGET_RO_FILE_SYSTEM_TYPE)
TARGET_COPY_OUT_SYSTEM_EXT := system_ext

# Build a separate odm.img partition
BOARD_USES_ODMIMAGE := true
BOARD_ODMIMAGE_FILE_SYSTEM_TYPE := $(TARGET_RO_FILE_SYSTEM_TYPE)
TARGET_COPY_OUT_ODM := odm

# Build a separate vendor_dlkm partition
BOARD_USES_VENDOR_DLKMIMAGE := true
BOARD_VENDOR_DLKMIMAGE_FILE_SYSTEM_TYPE := ext4
TARGET_COPY_OUT_VENDOR_DLKM := vendor_dlkm

# Build a separate odm_dlkm partition
BOARD_USES_ODM_DLKMIMAGE := true
BOARD_ODM_DLKMIMAGE_FILE_SYSTEM_TYPE := ext4
TARGET_COPY_OUT_ODM_DLKM := odm_dlkm

# FIXME: Remove this once we generate the vbmeta digest correctly
BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --flag 2

# Enable chained vbmeta for system image mixing
BOARD_AVB_VBMETA_SYSTEM := product system system_ext
BOARD_AVB_VBMETA_SYSTEM_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem
BOARD_AVB_VBMETA_SYSTEM_ALGORITHM := SHA256_RSA2048
BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX := $(PLATFORM_SECURITY_PATCH_TIMESTAMP)
BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX_LOCATION := 1

BOARD_USES_GENERIC_AUDIO := false
USE_CAMERA_STUB := true
TARGET_USERIMAGES_SPARSE_EXT_DISABLED := true

# Hardware composer configuration
TARGET_USES_HWC2 := true

# The compiler will occasionally generate movaps, etc.
BOARD_MALLOC_ALIGNMENT := 16

# Make the userdata partition 6G to accommodate ASAN and CTS
BOARD_USERDATAIMAGE_PARTITION_SIZE := 6442450944
TARGET_USERIMAGES_SPARSE_F2FS_DISABLED := true
BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE := $(TARGET_USERDATAIMAGE_FILE_SYSTEM_TYPE)
TARGET_USERIMAGES_USE_F2FS := true

# Cache partition size: 64M
BOARD_CACHEIMAGE_PARTITION_SIZE := 67108864
BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4

BOARD_GPU_DRIVERS := virgl

# Enable goldfish's encoder.
# TODO(b/113617962) Remove this if we decide to use
# device/generic/opengl-transport to generate the encoder
BUILD_EMULATOR_OPENGL_DRIVER := true
BUILD_EMULATOR_OPENGL := true

# Minimum size of the final bootable disk image: 10G
# GCE will pad disk images out to 10G. Our disk images should be at least as
# big to avoid warnings about partition table oddities.
BOARD_DISK_IMAGE_MINIMUM_SIZE := 10737418240

BOARD_BOOTIMAGE_MAX_SIZE := 8388608
BOARD_SYSLOADER_MAX_SIZE := 7340032
# TODO(san): See if we can get rid of this.
BOARD_FLASH_BLOCK_SIZE := 512

USE_OPENGL_RENDERER := true

# Wifi.
BOARD_WLAN_DEVICE           := wlan0
BOARD_HOSTAPD_DRIVER        := NL80211
BOARD_WPA_SUPPLICANT_DRIVER := NL80211
WPA_SUPPLICANT_VERSION      := VER_0_8_X
WIFI_DRIVER_FW_PATH_PARAM   := "/dev/null"
WIFI_DRIVER_FW_PATH_STA     := "/dev/null"
WIFI_DRIVER_FW_PATH_AP      := "/dev/null"

# vendor sepolicy
BOARD_VENDOR_SEPOLICY_DIRS += device/google/cuttlefish/shared/sepolicy/vendor
BOARD_VENDOR_SEPOLICY_DIRS += device/google/cuttlefish/shared/sepolicy/vendor/google
# product sepolicy, allow other layers to append
PRODUCT_PRIVATE_SEPOLICY_DIRS += device/google/cuttlefish/shared/sepolicy/product/private
# PRODUCT_PUBLIC_SEPOLICY_DIRS += device/google/cuttlefish/shared/sepolicy/product/public
# system_ext sepolicy
SYSTEM_EXT_PRIVATE_SEPOLICY_DIRS += device/google/cuttlefish/shared/sepolicy/system_ext/private
# SYSTEM_EXT_PUBLIC_SEPOLICY_DIRS += device/google/cuttlefish/shared/sepolicy/system_ext/public

STAGEFRIGHT_AVCENC_CFLAGS := -DANDROID_GCE

INIT_BOOTCHART := true

# Settings for dhcpcd-6.8.2.
DHCPCD_USE_IPV6 := no
DHCPCD_USE_DBUS := no
DHCPCD_USE_SCRIPT := yes


TARGET_RECOVERY_PIXEL_FORMAT := ABGR_8888
TARGET_RECOVERY_UI_LIB := librecovery_ui_cuttlefish
TARGET_RECOVERY_FSTAB ?= device/google/cuttlefish/shared/config/fstab.f2fs

BOARD_SUPER_PARTITION_SIZE := 6442450944
BOARD_SUPER_PARTITION_GROUPS := google_system_dynamic_partitions google_vendor_dynamic_partitions
BOARD_GOOGLE_SYSTEM_DYNAMIC_PARTITIONS_PARTITION_LIST := product system system_ext
BOARD_GOOGLE_SYSTEM_DYNAMIC_PARTITIONS_SIZE := 5368709120  # 5GiB
BOARD_GOOGLE_VENDOR_DYNAMIC_PARTITIONS_PARTITION_LIST := odm vendor vendor_dlkm odm_dlkm
BOARD_GOOGLE_VENDOR_DYNAMIC_PARTITIONS_SIZE := 1073741824
BOARD_BUILD_SUPER_IMAGE_BY_DEFAULT := true
BOARD_SUPER_IMAGE_IN_UPDATE_PACKAGE := true
TARGET_RELEASETOOLS_EXTENSIONS := device/google/cuttlefish/shared

# Generate a partial ota update package for partitions in vbmeta_system
BOARD_PARTIAL_OTA_UPDATE_PARTITIONS_LIST := product system system_ext vbmeta_system

BOARD_BOOTLOADER_IN_UPDATE_PACKAGE := true
BOARD_RAMDISK_USE_LZ4 := true

# To see full logs from init, disable ratelimiting.
# The default is 5 messages per second amortized, with a burst of up to 10.
BOARD_KERNEL_CMDLINE += printk.devkmsg=on
BOARD_KERNEL_CMDLINE += firmware_class.path=/vendor/etc/

BOARD_KERNEL_CMDLINE += init=/init
BOARD_KERNEL_CMDLINE += androidboot.hardware=cutf_cvm

BOARD_KERNEL_CMDLINE += loop.max_part=7

ifeq ($(TARGET_USERDATAIMAGE_FILE_SYSTEM_TYPE),f2fs)
BOARD_KERNEL_CMDLINE += androidboot.fstab_suffix=f2fs
endif

ifeq ($(TARGET_USERDATAIMAGE_FILE_SYSTEM_TYPE),ext4)
BOARD_KERNEL_CMDLINE += androidboot.fstab_suffix=ext4
endif

BOARD_INCLUDE_DTB_IN_BOOTIMG := true
BOARD_BOOT_HEADER_VERSION := 3
BOARD_USES_RECOVERY_AS_BOOT := true
BOARD_MKBOOTIMG_ARGS += --header_version $(BOARD_BOOT_HEADER_VERSION)
PRODUCT_COPY_FILES += \
    device/google/cuttlefish/dtb.img:dtb.img \
    device/google/cuttlefish/required_images:required_images \

BOARD_BUILD_SYSTEM_ROOT_IMAGE := false

# Cuttlefish doesn't support ramdump feature yet, exclude the ramdump debug tool.
EXCLUDE_BUILD_RAMDUMP_UPLOADER_DEBUG_TOOL := true