wifi: Add PixelWifiOverlay2023_midyear_F10 for F10
Currently, both L10 and F10 use PixelWifiOverlay2023_midyear.
Since L10 and F10 use different WLAN solution, we need two independent
overlay.
L10 uses PixelWifiOverlay2023_midyear
F10 uses PixelWifiOverlay2023_midyear_F10
Bug: 228563770
Test: Overlay can be read correctly.
Change-Id: I51fff83a27366d281987d61b54150459e802fca5
diff --git a/rro_overlays/WifiOverlay/res/values/config.xml b/rro_overlays/WifiOverlay/res/values/config.xml
new file mode 100644
index 0000000..c666496
--- /dev/null
+++ b/rro_overlays/WifiOverlay/res/values/config.xml
@@ -0,0 +1,152 @@
+<?xml version="1.0" encoding="utf-8"?>
+
+<!--
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+-->
+<resources>
+ <!-- Boolean indicating whether the wifi chipset has 5GHz frequency band support -->
+ <bool translatable="false" name="config_wifi5ghzSupport">true</bool>
+
+ <!-- boolean indicating whether the WiFi chipset has 6GHz band support -->
+ <bool translatable="false" name ="config_wifi6ghzSupport">true</bool>
+
+ <!-- Boolean indicating whether 802.11r Fast BSS Transition is enabled on this platform -->
+ <bool translatable="false" name="config_wifi_fast_bss_transition_enabled">true</bool>
+
+ <!-- Boolean indicating whether the wifi chipset has background scan support -->
+ <bool translatable="false" name="config_wifi_background_scan_support">true</bool>
+
+ <!-- Integer thresholds, do not connect to APs with RSSI lower than these values -->
+ <integer translatable="false" name="config_wifi_framework_wifi_score_entry_rssi_threshold_5GHz">-77</integer>
+ <integer translatable="false" name="config_wifi_framework_wifi_score_entry_rssi_threshold_24GHz">-80</integer>
+ <!-- Integer thresholds for low network score, should be somewhat less than the entry thresholds -->
+ <integer translatable="false" name="config_wifi_framework_wifi_score_bad_rssi_threshold_5GHz">-80</integer>
+ <integer translatable="false" name="config_wifi_framework_wifi_score_bad_rssi_threshold_24GHz">-83</integer>
+
+ <!-- Boolean indicating whether or not to revert to default country code when cellular
+ radio is unable to find any MCC information to infer wifi country code from -->
+ <bool translatable="false" name="config_wifi_revert_country_code_on_cellular_loss">false</bool>
+
+ <!-- Boolean indicating whether or not wifi should turn off when emergency call is made -->
+ <bool translatable="false" name="config_wifi_turn_off_during_emergency_call">true</bool>
+
+ <!-- Configure wifi tcp buffersizes in the form:
+ rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max -->
+ <string name="config_wifi_tcp_buffers" translatable="false">524288,2097152,8388608,262144,524288,4194304</string>
+
+ <!-- Enable ACS (auto channel selection) for Wifi hotspot (SAP) -->
+ <bool translatable="false" name="config_wifi_softap_acs_supported">true</bool>
+
+ <!-- Enable 802.11ac for Wifi hotspot (SAP) -->
+ <bool translatable="false" name="config_wifi_softap_ieee80211ac_supported">true</bool>
+
+ <!-- True if the firmware supports connected MAC randomization -->
+ <bool name="config_wifi_connected_mac_randomization_supported">true</bool>
+
+ <!-- True if the firmware supports p2p MAC randomization -->
+ <bool name="config_wifi_p2p_mac_randomization_supported">true</bool>
+
+ <!-- True if the firmware supports ap MAC randomization -->
+ <bool name="config_wifi_ap_mac_randomization_supported">true</bool>
+
+ <!-- True if the firmware supports Wi-Fi link probing -->
+ <bool name="config_wifi_link_probing_supported">true</bool>
+
+ <!-- Indicates that a full bugreport should be triggered when wifi diagnostics detects an error on non-user (i.e debug) builds -->
+ <bool translatable="false" name="config_wifi_diagnostics_bugreport_enabled">true</bool>
+
+ <!-- Default access point SSID used for tethering -->
+ <string name="wifi_tether_configure_ssid_default" translatable="false">Pixel</string>
+
+ <!-- Integer indicating maximum hardware supported client number of soft ap -->
+ <integer translatable="false" name="config_wifiHardwareSoftapMaxClientCount">32</integer>
+
+ <!-- Array indicating wifi fatal firmware alert error code list from driver -->
+ <array translatable="false" name="config_wifi_fatal_firmware_alert_error_code_list">
+ <item>1</item> <!-- ALERT_TX_STALL -->
+ <item>2</item> <!-- ALERT_RX_STALL -->
+ <item>3</item> <!-- ALERT_IOCTL_TIMEOUT -->
+ <item>8</item> <!-- ALERT_FW_QUEUE_STALL -->
+ </array>
+
+ <!-- Integer delay in milliseconds before set wlan interface up during watchdog recovery -->
+ <integer name="config_wifi_framework_recovery_timeout_delay">3000</integer>
+
+ <!-- Number of self recoveries to be attempted per hour. Any fatal errors beyond this will
+ cause the wifi stack to turn wifi off and wait for user input.
+ Set to 0 to turn off recovery attempts and always turn off wifi on failures -->
+ <integer translatable="false" name="config_wifiMaxNativeFailureSelfRecoveryPerHour">10</integer>
+
+ <!-- Wifi driver supports IEEE80211AX for softap -->
+ <bool translatable="false" name="config_wifiSoftapIeee80211axSupported">true</bool>
+
+ <!-- Indicates that 11ax mode is supported on this device
+ Note that if this flag is set to true, then 11ax is assumed to be supported.
+ However, if it is left to the default value of false, the 11ax support will
+ be checked via NL80211 interface -->
+ <bool translatable="false" name="config_wifi11axSupportOverride">true</bool>
+
+ <!-- Wifi driver supports WPA3 Simultaneous Authentication of Equals (WPA3-SAE) for softap -->
+ <bool translatable="false" name="config_wifi_softap_sae_supported">true</bool>
+
+ <!-- Override channel utilization estimation with fixed value, disabled in brcm-based pixels -->
+ <bool translatable="false" name="config_wifiChannelUtilizationOverrideEnabled">false</bool>
+
+ <!-- Enable adding minimum confirmation duration when sending network score to connectivity service. -->
+ <bool translatable="false" name="config_wifiMinConfirmationDurationSendNetworkScoreEnabled">true</bool>
+
+ <!-- Enable concurrent STA + STA peer to peer + internet connectivity -->
+ <bool translatable="false" name="config_wifiMultiStaLocalOnlyConcurrencyEnabled">true</bool>
+
+ <!-- Enable concurrent STA + STA MBB support -->
+ <bool translatable="false" name="config_wifiMultiStaNetworkSwitchingMakeBeforeBreakEnabled">true</bool>
+
+ <!-- Enable concurrent Bridged access point (AP) support -->
+ <bool translatable="false" name="config_wifiBridgedSoftApSupported">true</bool>
+
+ <!-- Enable concurrent STA + Bridged access point (AP) support -->
+ <bool translatable="false" name="config_wifiStaWithBridgedSoftApConcurrencySupported">true</bool>
+
+ <!-- Indicates that SAE Hash-to-Element is supported on this device -->
+ <bool translatable="false" name="config_wifiSaeH2eSupported">true</bool>
+
+ <!-- Enable the default coex channel avoidance algorithm and disable the functionality of
+ WifiManager#setCoexUnsafeChannels. -->
+ <bool translatable="false" name="config_wifiDefaultCoexAlgorithmEnabled">true</bool>
+
+ <!-- If the default coex channel avoidance algorithm is enabled, then avoid channels that
+ conflict with GPS L1. -->
+ <bool translatable="false" name="config_wifiCoexForGpsL1">true</bool>
+
+ <!-- The distance in KHz between Wi-Fi-based interference and GPS L1 that is considered unsafe. -->
+ <integer translatable="false" name="config_wifiCoexGpsL1ThresholdKhz">10000</integer>
+
+ <!-- Whether to use the explicit vendor HAL API: IWifiStaIface.setRoamingState for disabling fw roaming. -->
+ <bool translatable="false" name="config_wifiUseHalApiToDisableFwRoaming">true</bool>
+
+ <!-- Indicate the driver doesn't support NL80211 Reg changed event -->
+ <bool translatable="false" name="config_wifiDriverSupportedNl80211RegChangedEvent">false</bool>
+
+ <!-- Indicate whether the verbose logging is always on -->
+ <!-- 0: verbose logging controlled by user
+ 1: verbose logging on by default for userdebug
+ 2: verbose logging on by default for all builds -->
+ <integer translatable="false" name="config_wifiVerboseLoggingAlwaysOnLevel">1</integer>
+
+ <!-- Enable aggregation of Wifi link layer radio stats from all radios -->
+ <bool translatable="false" name="config_wifiLinkLayerAllRadiosStatsAggregationEnabled">true</bool>
+</resources>
