Share the btconfig tool between sapphire and dream
Change-Id: I29483712f7d6f37bd8617aa6b9998a4c4c9b75d0
diff --git a/tools/Android.mk b/tools/Android.mk
deleted file mode 100644
index a31b2db..0000000
--- a/tools/Android.mk
+++ /dev/null
@@ -1,39 +0,0 @@
-# Copyright (C) 2008 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-ifeq ($(TARGET_DEVICE),dream)
-ifneq ($(BUILD_TINY_ANDROID),true)
-
-LOCAL_PATH:= $(call my-dir)
-
-#
-# btconfig
-#
-
-include $(CLEAR_VARS)
-
-LOCAL_SRC_FILES:= btconfig.c
-
-LOCAL_SHARED_LIBRARIES += libbluetooth
-
-LOCAL_C_INCLUDES:= $(call include-path-for, bluez-libs)
-
-LOCAL_MODULE_PATH := $(TARGET_OUT_OPTIONAL_EXECUTABLES)
-LOCAL_MODULE_TAGS := eng
-LOCAL_MODULE:= btconfig
-
-include $(BUILD_EXECUTABLE)
-
-endif # not BUILD_TINY_ANDROID
-endif # TARGET_DEVICE
diff --git a/tools/MODULE_LICENSE_APACHE2 b/tools/MODULE_LICENSE_APACHE2
deleted file mode 100644
index e69de29..0000000
--- a/tools/MODULE_LICENSE_APACHE2
+++ /dev/null
diff --git a/tools/btconfig.c b/tools/btconfig.c
deleted file mode 100644
index 0e25915..0000000
--- a/tools/btconfig.c
+++ /dev/null
@@ -1,615 +0,0 @@
-/*
- * Copyright (C) 2007 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-/** Bluetooth configuration for dream (debug only) */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <errno.h>
-#include <sys/uio.h>
-#include <unistd.h>
-
-#include <bluetooth/bluetooth.h>
-#include <bluetooth/hci.h>
-#include <bluetooth/hci_lib.h>
-#include <bluetooth/sco.h>
-
-int vendor_setup_pcm(int sock) {
- /* Use vendor-specific HCI commands to set up SCO over HCI pr PCM */
- int rc;
- unsigned char type = HCI_COMMAND_PKT;
- hci_command_hdr hdr;
- /* HCI_VS_Write_SCO_Configuration_Island3
- * This command is used to configure the codec interface paramters and
- * includes configuration of the PCM clock rate which is relevant when BT
- * core is generating the clock. This command MUST be used by the host in
- * order to use PCM interface.
- * */
- hdr.opcode = 0xFD06;
- unsigned char cmd[] = {
- 0x00, 0x08, // clock rate: 2048 kHz
- 0x01, // BRF6300 is input (slave)
- 0x40, 0x1f, 00, 00, // frame sync frequency: 8kHz
- 0x01, 00, // frame sync duty cycle: 1 PCM clock
- 0x01, // frame sync edge: falling
- 0x00, // frame sync polarity: active high
- 0x00, // reserved
- // CHANNEL 1
- 0x10, 0x00, // out sample size: 16 bits
- 0x00, 0x00, // out sample offset in frame: 0 PCM clock cycle
- 0x00, // out edge: rising
- 0x0E, 0x00, // in sample size: 14 bits
- 0x01, 0x00, // in sample offset in frame: 1 PCM clock cycle
- 0x00, // in edge: rising
- 0x00, // reserved
- // CHANNEL 2 (not used)
- 0x00, 0x00,
- 0x00, 0x00,
- 0x00,
- 0x00, 0x00,
- 0x00, 0x00,
- 0x00,
- 0x00,
- };
- hdr.plen = sizeof(cmd);
- struct iovec iov[] = {
- { &type, 1 },
- { &hdr, sizeof(hdr) },
- { &cmd, sizeof(cmd) },
- };
- int total_len = 1 + sizeof(hdr) + sizeof(cmd);
- errno = 0;
- rc = writev(sock, iov, sizeof(iov)/sizeof(iov[0]));
- if (rc != total_len) {
- printf("Can't write %d bytes (wrote %d) to HCI socket: %s (%d)!\n",
- total_len, rc, strerror(errno), errno);
- return -1;
- }
- return 0;
-}
-
-int vendor_status(int sock) {
- /* Use vendor-specific HCI command to get system status */
- int rc;
- unsigned char type = HCI_COMMAND_PKT;
- hci_command_hdr hdr;
- /* HCI_VS_Get_System_Status */
- hdr.opcode = 0xFE1F;
- unsigned char cmd[] = {};
- hdr.plen = sizeof(cmd);
- struct iovec iov[] = {
- { &type, 1 },
- { &hdr, sizeof(hdr) },
- { &cmd, sizeof(cmd) },
- };
- int total_len = 1 + sizeof(hdr) + sizeof(cmd);
- errno = 0;
- rc = writev(sock, iov, sizeof(iov)/sizeof(iov[0]));
- if (rc != total_len) {
- printf("Can't write %d bytes (wrote %d) to HCI socket: %s (%d)!\n",
- total_len, rc, strerror(errno), errno);
- return -1;
- }
- return 0;
-}
-
-int vendor_sleep(int sock, int enable) {
- /* Use vendor-specific HCI command to go into deep sleep mode */
- int rc;
- unsigned char type = HCI_COMMAND_PKT;
- hci_command_hdr hdr;
- /* HCI_VS_Sleep_Mode_Configuration */
- hdr.opcode = 0xFD0C;
- unsigned char cmd[] = {
- 0x01, // big sleep (1 enable)
- enable ? 0x01 : 0x00, // deep sleep (1 enable)
- 0x00, // deep sleep protocol mode: HCILL
- 0xFF, // reserved
- 0xFF, // output pull: don't change
- 0xFF, // input pull: don't change
- 0x00, // reserved
- 0x00, // deep sleep timeouut: 0
- };
- hdr.plen = sizeof(cmd);
- struct iovec iov[] = {
- { &type, 1 },
- { &hdr, sizeof(hdr) },
- { &cmd, sizeof(cmd) },
- };
- int total_len = 1 + sizeof(hdr) + sizeof(cmd);
- errno = 0;
- rc = writev(sock, iov, sizeof(iov)/sizeof(iov[0]));
- if (rc != total_len) {
- printf("Can't write %d bytes (wrote %d) to HCI socket: %s (%d)!\n",
- total_len, rc, strerror(errno), errno);
- return -1;
- }
- return 0;
-}
-
-int vendor_uart_baudrate(int sock, uint32_t rate) {
- /* Use vendor-specific HCI command to set uart baud rate */
- int rc;
- unsigned char type = HCI_COMMAND_PKT;
- hci_command_hdr hdr;
- printf("Setting baud rate to %d\n", rate);
- /* HCI_VS_Sleep_Mode_Configuration */
- hdr.opcode = 0xFF36;
- hdr.plen = sizeof(rate);
- struct iovec iov[] = {
- { &type, 1 },
- { &hdr, sizeof(hdr) },
- { &rate, sizeof(rate) },
- };
- int total_len = 1 + sizeof(hdr) + sizeof(rate);
- errno = 0;
- rc = writev(sock, iov, sizeof(iov)/sizeof(iov[0]));
- if (rc != total_len) {
- printf("Can't write %d bytes (wrote %d) to HCI socket: %s (%d)!\n",
- total_len, rc, strerror(errno), errno);
- return -1;
- }
- return 0;
-}
-
-int vendor_setup_pcm2(int sock) {
- int rc;
- unsigned char type = HCI_COMMAND_PKT;
- hci_command_hdr hdr;
- // HCI_VS_Write_CODEC_Config_Enhanced_Island3
- hdr.opcode = 0xFD07;
- unsigned char cmd[] = {
- 0x00, // PCM clock shutdown: disabled
- 0x00, 0x00, // PCM clock start
- 0x00, 0x00, // PCM clock stop
- 0x00, // reserved
- // Channel 1
- 0x04, // din order: MSB first, don't swap bytes, shift sample
- 0x04, // dout order: MSB first, don't swap bytes, shift sample
- 0x02, // dout mode: Hi-Z when idle
- 0x00, // dout duplication: disabled
- 0x00, 0x00, 0x00, 0x00, // tx_dup_value
- 0x00, // data quant: bitwise
- 0x00, // reserved
- // Channel 2
- 0x00, // din order
- 0x00, // dout order
- 0x00, // dout mode
- 0x00, // dout duplication
- 0x00, 0x00, 0x00, 0x00, // tx_dup_value
- 0x00, // data quant
- 0x00, // reserved
- };
- hdr.plen = sizeof(cmd);
- struct iovec iov[] = {
- { &type, 1 },
- { &hdr, sizeof(hdr) },
- { &cmd, sizeof(cmd) },
- };
- int total_len = 1 + sizeof(hdr) + sizeof(cmd);
- errno = 0;
- rc = writev(sock, iov, sizeof(iov)/sizeof(iov[0]));
- if (rc != total_len) {
- printf("Can't write %d bytes (wrote %d) to HCI socket: %s (%d)!\n",
- total_len, rc, strerror(errno), errno);
- return -1;
- }
- return 0;
-}
-
-int vendor_coexist(int sock, int enable) {
- /* Use vendor-specific HCI command to set up WIFI coexistance*/
- int rc;
- unsigned char type = HCI_COMMAND_PKT;
- hci_command_hdr hdr;
- /* HCI_VS_Write_Wlan_Configuration */
- hdr.opcode = 0xFD1D;
- unsigned char cmd[] = {
- 0x04, // enable: SG2.0
- 0x01, // polarity: active high
- 0xE9, 0x05, // priority: TDD, page, page scan, inquiry, inquiry scan, sniff, SCO/eSCO
- 0x00, 0x00, // connection handle select
- 0x00, // connection handle: disable
- 0x00, // frequency mask: disable
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, // freq mask: dont change
- 0x04, // wlan0 mux: IO14
- 0x01, // wlan0 input pull: enabled
- 0x00, // wlan1 mux: IO4
- 0x01, // wlan1 input pull: enabled
- 0x02, // wlan2 mux: IO3
- 0x01, // wlan2 input pull: enabled
- 0x00, // wlan3 mux: PA_OFF on IO1
- 0xFF, // wlan3 input pull: don't cahnge
- enable? 0x00 : 0x01, // wlan interface: enable/disable
- };
- hdr.plen = sizeof(cmd);
- struct iovec iov[] = {
- { &type, 1 },
- { &hdr, sizeof(hdr) },
- { &cmd, sizeof(cmd) },
- };
- int total_len = 1 + sizeof(hdr) + sizeof(cmd);
- errno = 0;
- rc = writev(sock, iov, sizeof(iov)/sizeof(iov[0]));
- if (rc != total_len) {
- printf("Can't write %d bytes (wrote %d) to HCI socket: %s (%d)!\n",
- total_len, rc, strerror(errno), errno);
- return -1;
- }
- return 0;
-}
-
-int setup_loopback1(int sock) {
- int rc;
- unsigned char type = HCI_COMMAND_PKT;
- hci_command_hdr hdr;
- // HCI_VS_Set_PCM_Loopback_Configuration_Island3 (0xFD04)
- hdr.opcode = 0xFD04;
- unsigned char cmd[] = {
- 0xFF, 0x00, // delay: 255 frame's
- };
- hdr.plen = sizeof(cmd);
- struct iovec iov[] = {
- { &type, 1 },
- { &hdr, sizeof(hdr) },
- { &cmd, sizeof(cmd) },
- };
- int total_len = 1 + sizeof(hdr) + sizeof(cmd);
- errno = 0;
- rc = writev(sock, iov, sizeof(iov)/sizeof(iov[0]));
- if (rc != total_len) {
- printf("Can't write %d bytes (wrote %d) to HCI socket: %s (%d)!\n",
- total_len, rc, strerror(errno), errno);
- return -1;
- }
- return 0;
-}
-
-int setup_loopback2(int sock, int on) {
- int rc;
- unsigned char type = HCI_COMMAND_PKT;
- hci_command_hdr hdr;
- // HCI_VS_Set_PCM_Loopback_Enable (0xFE28)
- hdr.opcode = 0xFE28;
- printf("loopback %s\n", on ? "ON" : "OFF");
- unsigned char cmd[] = {
- on ? 0x01 : 0x00, // enable
- };
- hdr.plen = sizeof(cmd);
- struct iovec iov[] = {
- { &type, 1 },
- { &hdr, sizeof(hdr) },
- { &cmd, sizeof(cmd) },
- };
- int total_len = 1 + sizeof(hdr) + sizeof(cmd);
- errno = 0;
- rc = writev(sock, iov, sizeof(iov)/sizeof(iov[0]));
- if (rc != total_len) {
- printf("Can't write %d bytes (wrote %d) to HCI socket: %s (%d)!\n",
- total_len, rc, strerror(errno), errno);
- return -1;
- }
- return 0;
-}
-
-
-int write_voice_setting(int sock) {
- int rc;
- unsigned char type = HCI_COMMAND_PKT;
- hci_command_hdr hdr;
- // HCI_Write_Voice_Setting (0x0026)
- hdr.opcode = 0x0026;
- unsigned char cmd[] = {
- 0x00, 0x00,
- };
- hdr.plen = sizeof(cmd);
- struct iovec iov[] = {
- { &type, 1 },
- { &hdr, sizeof(hdr) },
- { &cmd, sizeof(cmd) },
- };
- int total_len = 1 + sizeof(hdr) + sizeof(cmd);
- errno = 0;
- rc = writev(sock, iov, sizeof(iov)/sizeof(iov[0]));
- if (rc != total_len) {
- printf("Can't write %d bytes (wrote %d) to HCI socket: %s (%d)!\n",
- total_len, rc, strerror(errno), errno);
- return -1;
- }
- return 0;
-}
-
-static int vendor_specific_sco_setup(int hcifd, int over_hci) {
- /* Use vendor-specific HCI commands to set up SCO over HCI or PCM */
- int rc;
- unsigned char type = HCI_COMMAND_PKT;
- hci_command_hdr hdr;
- /* HCI_VS_Write_SCO_Configuration.
- * Once this command is issued, it is valid for all new SCO channels
- * created. It is used to determine the following paramters
- * SCO Connection type - Host (voice over HCI) or Codec
- * TX packet length used for flow control calculations
- * TX Buffer max latency determines how much time the data can be in the TX
- * buffer before being flushed out. Applicable only if flow control is
- * disabled.
- */
- hdr.opcode = 0xFE10;
- hdr.plen = 0x05;
- struct hci_sco_t {
- unsigned char conn_type;
- unsigned char packet_size;
- unsigned char max_latency[2];
- unsigned char bad_crc;
- } __attribute__((packed)) hci_sco;
- hci_sco.packet_size = 0x00; /* packet size--keep current setting */
- hci_sco.max_latency[0] = 0x00;
- hci_sco.max_latency[1] = 0x00; /* max latency--keep current setting */
- hci_sco.bad_crc = 0xFF; /* bad CRC handling--keep current setting */
- struct iovec iov[3] = {
- { &type, 1 },
- { &hdr, sizeof(hdr) },
- { &hci_sco, sizeof(hci_sco) }
- };
- int total_len = 1 + sizeof(hdr) + sizeof(hci_sco);
- printf("Setting Vendor-specific SCO over %s.\n",
- (over_hci ? "HCI" : "PCM"));
- errno = 0;
- hci_sco.conn_type = (unsigned char)(over_hci ? 0x01 : 0x00);
- rc = writev(hcifd, iov, sizeof(iov)/sizeof(iov[0]));
- if (rc != total_len) {
- printf("Can't write %d bytes (wrote %d) to HCI socket: %s (%d)!\n",
- total_len, rc, strerror(errno), errno);
- return -1;
- }
- return 0;
-}
-
-int get_hci_sock() {
- int sock = socket(AF_BLUETOOTH, SOCK_RAW, BTPROTO_HCI);
- struct sockaddr_hci addr;
- int opt;
-
- if(sock < 0) {
- printf("Can't create raw socket!\n");
- return -1;
- }
-
- opt = 1;
- printf("Setting data direction.\n");
- if (setsockopt(sock, SOL_HCI, HCI_DATA_DIR, &opt, sizeof(opt)) < 0) {
- printf("Error setting data direction\n");
- return -1;
- }
-
- /* Bind socket to the HCI device */
- addr.hci_family = AF_BLUETOOTH;
- addr.hci_dev = 0; // hci0
- printf("Binding to HCI device.\n");
- if(bind(sock, (struct sockaddr *) &addr, sizeof(addr)) < 0) {
- printf("Can't attach to device hci0. %s(%d)\n",
- strerror(errno),
- errno);
- return -1;
- }
- return sock;
-}
-
-static const int num_devices = 3;
-static const char device_names[3][20] = {
- "moto",
- "jabra250",
- "jabra125",
-};
-static const bdaddr_t device_addrs[3] = {
- {0xE1, 0x9C, 0x97, 0x2E, 0x0B, 0x00},
- {0x5E, 0x88, 0x26, 0xA4, 0x07, 0x00},
- {0xE3, 0xFD, 0x93, 0x8F, 0x16, 0x00},
-};
-
-void print_bdaddr(const bdaddr_t* bdaddr) {
- uint8_t* b = (uint8_t*)bdaddr;
- printf("%2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
- b[5], b[4], b[3], b[2], b[1], b[0]);
-}
-
-const bdaddr_t* get_remote_address(char* name) {
- int i;
- for (i=0; i<num_devices; i++) {
- if (strcmp(name, device_names[i]) == 0) {
- printf("Using ");
- print_bdaddr(&device_addrs[i]);
- return &device_addrs[i];
- }
- }
- printf("Unknown device: %s\n", name);
- for (i=0; i<num_devices; i++) {
- printf("%s ", device_names[i]);
- print_bdaddr(&device_addrs[i]);
- }
- exit(1);
-}
-
-void sco_setup(char *device_name) {
- struct sockaddr_sco sco_addr;
- int sco_sock;
-
- sco_sock = socket(PF_BLUETOOTH, SOCK_SEQPACKET, BTPROTO_SCO);
- if (sco_sock < 0) {
- printf("Could not create SCO socket\n");
- return;
- }
-
- /* Bind to local address */
- memset(&sco_addr, 0, sizeof(sco_addr));
- sco_addr.sco_family = AF_BLUETOOTH;
- hci_devba(0, &sco_addr.sco_bdaddr);
- printf("Local BDADDR is: ");
- print_bdaddr(&sco_addr.sco_bdaddr);
- printf("Binding...\n");
- if (bind(sco_sock, (struct sockaddr *) &sco_addr, sizeof(sco_addr)) < 0) {
- printf("Could not bind SCO socket\n");
- return;
- }
-
- memset(&sco_addr, 0, sizeof(sco_addr));
- sco_addr.sco_family = AF_BLUETOOTH;
- memcpy(&sco_addr.sco_bdaddr, get_remote_address(device_name), sizeof(bdaddr_t));
- printf("Connecting SCO socket...\n");
- print_bdaddr(&sco_addr.sco_bdaddr);
- if(connect(sco_sock, (struct sockaddr *)&sco_addr, sizeof(sco_addr)) < 0) {
- printf("Could not connect to SCO socket\n");
- return;
- }
-
- printf("SCO socket connected\n");
-
- struct sco_options opts;
- struct sco_conninfo conninfo;
-
- socklen_t len = sizeof(opts);
-
- if (getsockopt(sco_sock, SOL_SCO, SCO_OPTIONS, &opts, &len) < 0) {
- printf("Couldn't not get SCO socket options\n");
- return;
- }
- printf("SCO MTU: %d\n", opts.mtu);
-
- len = sizeof(conninfo);
- if (getsockopt(sco_sock, SOL_SCO, SCO_CONNINFO, &conninfo, &len) < 0) {
- printf("Couldn't get SCO connection options\n");
- return;
- }
- printf("SCO HCI handle: %d\n", conninfo.hci_handle);
- printf("SCO HCI device class: %02x%02x%02x\n",
- conninfo.dev_class[0],
- conninfo.dev_class[1],
- conninfo.dev_class[2]);
-}
-
-
-
-int main(int argc, char **argv) {
- if (argc == 1) {
- goto usage;
- }
-
- if (argc >= 2 && strcmp(argv[1], "pcm_setup") == 0 ) {
- int sock = get_hci_sock();
- if (sock < 0) {
- printf("Could not open hci socket\n");
- return -1;
- }
- if (vendor_specific_sco_setup(sock, 0 /* set up over PCM */) < 0) {
- printf("Could not set up SCO\n");
- return -1;
- }
- sleep(1);
- if (vendor_setup_pcm(sock) < 0) {
- printf("Could not setup up PCM\n");
- return -1;
- }
- sleep(1);
- } else if (argc >= 2 && strcmp(argv[1], "pcm_setup2") == 0 ) {
- int sock = get_hci_sock();
- if (sock < 0) {
- printf("Could not open hci socket\n");
- return -1;
- }
- if (vendor_setup_pcm2(sock) < 0) {
- printf("Could not setup up PCM\n");
- return -1;
- }
- sleep(1);
- } else if (argc >= 2 && strcmp(argv[1], "loopback") == 0 ) {
- int enable = 1;
- if (argc > 2) {
- if (strcmp(argv[2], "off") == 0) {
- enable = 0;
- }
- }
- int sock = get_hci_sock();
- if (sock < 0) {
- printf("Could not open hci socket\n");
- return -1;
- }
- setup_loopback1(sock);
- setup_loopback2(sock, enable);
- sleep(1);
- } else if (argc >= 2 && strcmp(argv[1], "sleep") == 0 ) {
- int enable = 1;
- if (argc > 2) {
- if (strcmp(argv[2], "off") == 0) {
- enable = 0;
- }
- }
- int sock = get_hci_sock();
- if (sock < 0) {
- printf("Could not open hci socket\n");
- return -1;
- }
- vendor_sleep(sock, enable);
- sleep(1);
- } else if (argc >= 2 && strcmp(argv[1], "coed") == 0 ) {
- int enable = 1;
- if (argc > 2) {
- if (strcmp(argv[2], "off") == 0) {
- enable = 0;
- }
- }
- int sock = get_hci_sock();
- if (sock < 0) {
- printf("Could not open hci socket\n");
- return -1;
- }
- vendor_coexist(sock, enable);
- sleep(1);
- } else if (argc >= 3 && strcmp(argv[1], "rate") == 0 ) {
- uint32_t rate = atoi(argv[2]);
- int sock = get_hci_sock();
- if (sock < 0) {
- printf("Could not open hci socket\n");
- return -1;
- }
- vendor_uart_baudrate(sock, rate);
- sleep(1);
- } else if (argc >= 2 && strcmp(argv[1], "vs_status") == 0 ) {
- int sock = get_hci_sock();
- if (sock < 0) {
- printf("Could not open hci socket\n");
- return -1;
- }
- vendor_status(sock);
- sleep(1);
- } else if (argc >= 3 && strcmp(argv[1], "sco_setup") == 0 ) {
- sco_setup(argv[2]);
- sleep(100000000);
- } else {
-usage:
- printf("Usage:\n");
- printf("\tbtconfig sleep [on|off]\n");
- printf("\tbtconfig vs_status\n");
- printf("\tbtconfig pcm_setup\n");
- printf("\tbtconfig pcm_setup2\n");
- printf("\tbtconfig sco_setup DEVICE_ALIAS\n");
- printf("\tbtconfig loopback [on|off]\n");
- printf("\tbtconfig coed [on|off]\n");
- printf("\tbtconfig rate RATE\n");
- printf("\n");
- return 0;
- }
-
- return 0;
-}
