/** @file

Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution.  The
full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#include <PiDxe.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiRuntimeServicesTableLib.h>
#include <Library/BaseLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/LockBoxLib.h>
#include <Library/DebugLib.h>
#include <Protocol/SmmCommunication.h>
#include <Guid/SmmLockBox.h>

#include "SmmLockBoxLibPrivate.h"

/**
  This function will save confidential information to lockbox.

  @param Guid       the guid to identify the confidential information
  @param Buffer     the address of the confidential information
  @param Length     the length of the confidential information

  @retval RETURN_SUCCESS            the information is saved successfully.
  @retval RETURN_INVALID_PARAMETER  the Guid is NULL, or Buffer is NULL, or Length is 0
  @retval RETURN_ALREADY_STARTED    the requested GUID already exist.
  @retval RETURN_OUT_OF_RESOURCES   no enough resource to save the information.
  @retval RETURN_ACCESS_DENIED      it is too late to invoke this interface
  @retval RETURN_NOT_STARTED        it is too early to invoke this interface
  @retval RETURN_UNSUPPORTED        the service is not supported by implementaion.
**/
RETURN_STATUS
EFIAPI
SaveLockBox (
  IN  GUID                        *Guid,
  IN  VOID                        *Buffer,
  IN  UINTN                       Length
  )
{
  EFI_STATUS                      Status;
  EFI_SMM_COMMUNICATION_PROTOCOL  *SmmCommunication;
  EFI_SMM_LOCK_BOX_PARAMETER_SAVE *LockBoxParameterSave;
  EFI_SMM_COMMUNICATE_HEADER      *CommHeader;
  UINT8                           CommBuffer[sizeof(EFI_GUID) + sizeof(UINTN) + sizeof(EFI_SMM_LOCK_BOX_PARAMETER_SAVE)];
  UINTN                           CommSize;

  DEBUG ((EFI_D_INFO, "SmmLockBoxDxeLib SaveLockBox - Enter\n"));

  //
  // Basic check
  //
  if ((Guid == NULL) || (Buffer == NULL) || (Length == 0)) {
    return EFI_INVALID_PARAMETER;
  }

  //
  // Get needed resource
  //
  Status = gBS->LocateProtocol (
                  &gEfiSmmCommunicationProtocolGuid,
                  NULL,
                  (VOID **)&SmmCommunication
                  );
  if (EFI_ERROR (Status)) {
    return EFI_NOT_STARTED;
  }

  //
  // Prepare parameter
  //
  CommHeader = (EFI_SMM_COMMUNICATE_HEADER *)&CommBuffer[0];
  CopyMem (&CommHeader->HeaderGuid, &gEfiSmmLockBoxCommunicationGuid, sizeof(gEfiSmmLockBoxCommunicationGuid));
  CommHeader->MessageLength = sizeof(*LockBoxParameterSave);

  LockBoxParameterSave = (EFI_SMM_LOCK_BOX_PARAMETER_SAVE *)&CommBuffer[OFFSET_OF (EFI_SMM_COMMUNICATE_HEADER, Data)];
  LockBoxParameterSave->Header.Command    = EFI_SMM_LOCK_BOX_COMMAND_SAVE;
  LockBoxParameterSave->Header.DataLength = sizeof(*LockBoxParameterSave);
  LockBoxParameterSave->Header.ReturnStatus = (UINT64)-1;
  CopyMem (&LockBoxParameterSave->Guid, Guid, sizeof(*Guid));
  LockBoxParameterSave->Buffer     = (EFI_PHYSICAL_ADDRESS)(UINTN)Buffer;
  LockBoxParameterSave->Length     = (UINT64)Length;

  //
  // Send command
  //
  CommSize = sizeof(CommBuffer);
  Status = SmmCommunication->Communicate (
                               SmmCommunication,
                               &CommBuffer[0],
                               &CommSize
                               );
  ASSERT_EFI_ERROR (Status);

  Status = (EFI_STATUS)LockBoxParameterSave->Header.ReturnStatus;

  DEBUG ((EFI_D_INFO, "SmmLockBoxDxeLib SaveLockBox - Exit (%r)\n", Status));

  //
  // Done
  //
  return Status;
}

/**
  This function will set lockbox attributes.

  @param Guid       the guid to identify the confidential information
  @param Attributes the attributes of the lockbox

  @retval RETURN_SUCCESS            the information is saved successfully.
  @retval RETURN_INVALID_PARAMETER  attributes is invalid.
  @retval RETURN_NOT_FOUND          the requested GUID not found.
  @retval RETURN_ACCESS_DENIED      it is too late to invoke this interface
  @retval RETURN_NOT_STARTED        it is too early to invoke this interface
  @retval RETURN_UNSUPPORTED        the service is not supported by implementaion.
**/
RETURN_STATUS
EFIAPI
SetLockBoxAttributes (
  IN  GUID                        *Guid,
  IN  UINT64                      Attributes
  )
{
  EFI_STATUS                                Status;
  EFI_SMM_COMMUNICATION_PROTOCOL            *SmmCommunication;
  EFI_SMM_LOCK_BOX_PARAMETER_SET_ATTRIBUTES *LockBoxParameterSetAttributes;
  EFI_SMM_COMMUNICATE_HEADER                *CommHeader;
  UINT8                                     CommBuffer[sizeof(EFI_GUID) + sizeof(UINTN) + sizeof(EFI_SMM_LOCK_BOX_PARAMETER_SET_ATTRIBUTES)];
  UINTN                                     CommSize;

  DEBUG ((EFI_D_INFO, "SmmLockBoxDxeLib SetLockBoxAttributes - Enter\n"));

  //
  // Basic check
  //
  if ((Guid == NULL) ||
      ((Attributes & ~LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE) != 0)) {
    return EFI_INVALID_PARAMETER;
  }

  //
  // Get needed resource
  //
  Status = gBS->LocateProtocol (
                  &gEfiSmmCommunicationProtocolGuid,
                  NULL,
                  (VOID **)&SmmCommunication
                  );
  if (EFI_ERROR (Status)) {
    return EFI_NOT_STARTED;
  }

  //
  // Prepare parameter
  //
  CommHeader = (EFI_SMM_COMMUNICATE_HEADER *)&CommBuffer[0];
  CopyMem (&CommHeader->HeaderGuid, &gEfiSmmLockBoxCommunicationGuid, sizeof(gEfiSmmLockBoxCommunicationGuid));
  CommHeader->MessageLength = sizeof(*LockBoxParameterSetAttributes);

  LockBoxParameterSetAttributes = (EFI_SMM_LOCK_BOX_PARAMETER_SET_ATTRIBUTES *)&CommBuffer[OFFSET_OF (EFI_SMM_COMMUNICATE_HEADER, Data)];
  LockBoxParameterSetAttributes->Header.Command    = EFI_SMM_LOCK_BOX_COMMAND_SET_ATTRIBUTES;
  LockBoxParameterSetAttributes->Header.DataLength = sizeof(*LockBoxParameterSetAttributes);
  LockBoxParameterSetAttributes->Header.ReturnStatus = (UINT64)-1;
  CopyMem (&LockBoxParameterSetAttributes->Guid, Guid, sizeof(*Guid));
  LockBoxParameterSetAttributes->Attributes = (UINT64)Attributes;

  //
  // Send command
  //
  CommSize = sizeof(CommBuffer);
  Status = SmmCommunication->Communicate (
                               SmmCommunication,
                               &CommBuffer[0],
                               &CommSize
                               );
  ASSERT_EFI_ERROR (Status);

  Status = (EFI_STATUS)LockBoxParameterSetAttributes->Header.ReturnStatus;

  DEBUG ((EFI_D_INFO, "SmmLockBoxDxeLib SetLockBoxAttributes - Exit (%r)\n", Status));

  //
  // Done
  //
  return Status;
}

/**
  This function will update confidential information to lockbox.

  @param Guid   the guid to identify the original confidential information
  @param Offset the offset of the original confidential information
  @param Buffer the address of the updated confidential information
  @param Length the length of the updated confidential information

  @retval RETURN_SUCCESS            the information is saved successfully.
  @retval RETURN_INVALID_PARAMETER  the Guid is NULL, or Buffer is NULL, or Length is 0.
  @retval RETURN_NOT_FOUND          the requested GUID not found.
  @retval RETURN_BUFFER_TOO_SMALL   the original buffer to too small to hold new information.
  @retval RETURN_ACCESS_DENIED      it is too late to invoke this interface
  @retval RETURN_NOT_STARTED        it is too early to invoke this interface
  @retval RETURN_UNSUPPORTED        the service is not supported by implementaion.
**/
RETURN_STATUS
EFIAPI
UpdateLockBox (
  IN  GUID                        *Guid,
  IN  UINTN                       Offset,
  IN  VOID                        *Buffer,
  IN  UINTN                       Length
  )
{
  EFI_STATUS                        Status;
  EFI_SMM_COMMUNICATION_PROTOCOL    *SmmCommunication;
  EFI_SMM_LOCK_BOX_PARAMETER_UPDATE *LockBoxParameterUpdate;
  EFI_SMM_COMMUNICATE_HEADER        *CommHeader;
  UINT8                             CommBuffer[sizeof(EFI_GUID) + sizeof(UINTN) + sizeof(EFI_SMM_LOCK_BOX_PARAMETER_UPDATE)];
  UINTN                             CommSize;

  DEBUG ((EFI_D_INFO, "SmmLockBoxDxeLib UpdateLockBox - Enter\n"));

  //
  // Basic check
  //
  if ((Guid == NULL) || (Buffer == NULL) || (Length == 0)) {
    return EFI_INVALID_PARAMETER;
  }

  //
  // Get needed resource
  //
  Status = gBS->LocateProtocol (
                  &gEfiSmmCommunicationProtocolGuid,
                  NULL,
                  (VOID **)&SmmCommunication
                  );
  if (EFI_ERROR (Status)) {
    return EFI_NOT_STARTED;
  }

  //
  // Prepare parameter
  //
  CommHeader = (EFI_SMM_COMMUNICATE_HEADER *)&CommBuffer[0];
  CopyMem (&CommHeader->HeaderGuid, &gEfiSmmLockBoxCommunicationGuid, sizeof(gEfiSmmLockBoxCommunicationGuid));
  CommHeader->MessageLength = sizeof(*LockBoxParameterUpdate);

  LockBoxParameterUpdate = (EFI_SMM_LOCK_BOX_PARAMETER_UPDATE *)(UINTN)&CommBuffer[OFFSET_OF (EFI_SMM_COMMUNICATE_HEADER, Data)];
  LockBoxParameterUpdate->Header.Command    = EFI_SMM_LOCK_BOX_COMMAND_UPDATE;
  LockBoxParameterUpdate->Header.DataLength = sizeof(*LockBoxParameterUpdate);
  LockBoxParameterUpdate->Header.ReturnStatus = (UINT64)-1;
  CopyMem (&LockBoxParameterUpdate->Guid, Guid, sizeof(*Guid));
  LockBoxParameterUpdate->Offset = (UINT64)Offset;
  LockBoxParameterUpdate->Buffer = (EFI_PHYSICAL_ADDRESS)(UINTN)Buffer;
  LockBoxParameterUpdate->Length = (UINT64)Length;

  //
  // Send command
  //
  CommSize = sizeof(CommBuffer);
  Status = SmmCommunication->Communicate (
                               SmmCommunication,
                               &CommBuffer[0],
                               &CommSize
                               );
  ASSERT_EFI_ERROR (Status);

  Status = (EFI_STATUS)LockBoxParameterUpdate->Header.ReturnStatus;

  DEBUG ((EFI_D_INFO, "SmmLockBoxDxeLib UpdateLockBox - Exit (%r)\n", Status));

  //
  // Done
  //
  return Status;
}

/**
  This function will restore confidential information from lockbox.

  @param Guid   the guid to identify the confidential information
  @param Buffer the address of the restored confidential information
                NULL means restored to original address, Length MUST be NULL at same time.
  @param Length the length of the restored confidential information

  @retval RETURN_SUCCESS            the information is restored successfully.
  @retval RETURN_INVALID_PARAMETER  the Guid is NULL, or one of Buffer and Length is NULL.
  @retval RETURN_WRITE_PROTECTED    Buffer and Length are NULL, but the LockBox has no 
                                    LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE attribute.
  @retval RETURN_BUFFER_TOO_SMALL   the Length is too small to hold the confidential information.
  @retval RETURN_NOT_FOUND          the requested GUID not found.
  @retval RETURN_NOT_STARTED        it is too early to invoke this interface
  @retval RETURN_ACCESS_DENIED      not allow to restore to the address
  @retval RETURN_UNSUPPORTED        the service is not supported by implementaion.
**/
RETURN_STATUS
EFIAPI
RestoreLockBox (
  IN  GUID                        *Guid,
  IN  VOID                        *Buffer, OPTIONAL
  IN  OUT UINTN                   *Length  OPTIONAL
  )
{
  EFI_STATUS                         Status;
  EFI_SMM_COMMUNICATION_PROTOCOL     *SmmCommunication;
  EFI_SMM_LOCK_BOX_PARAMETER_RESTORE *LockBoxParameterRestore;
  EFI_SMM_COMMUNICATE_HEADER         *CommHeader;
  UINT8                              CommBuffer[sizeof(EFI_GUID) + sizeof(UINTN) + sizeof(EFI_SMM_LOCK_BOX_PARAMETER_RESTORE)];
  UINTN                              CommSize;

  DEBUG ((EFI_D_INFO, "SmmLockBoxDxeLib RestoreLockBox - Enter\n"));

  //
  // Basic check
  //
  if ((Guid == NULL) ||
      ((Buffer == NULL) && (Length != NULL)) ||
      ((Buffer != NULL) && (Length == NULL))) {
    return EFI_INVALID_PARAMETER;
  }

  //
  // Get needed resource
  //
  Status = gBS->LocateProtocol (
                  &gEfiSmmCommunicationProtocolGuid,
                  NULL,
                  (VOID **)&SmmCommunication
                  );
  if (EFI_ERROR (Status)) {
    return EFI_NOT_STARTED;
  }

  //
  // Prepare parameter
  //
  CommHeader = (EFI_SMM_COMMUNICATE_HEADER *)&CommBuffer[0];
  CopyMem (&CommHeader->HeaderGuid, &gEfiSmmLockBoxCommunicationGuid, sizeof(gEfiSmmLockBoxCommunicationGuid));
  CommHeader->MessageLength = sizeof(*LockBoxParameterRestore);

  LockBoxParameterRestore = (EFI_SMM_LOCK_BOX_PARAMETER_RESTORE *)&CommBuffer[OFFSET_OF (EFI_SMM_COMMUNICATE_HEADER, Data)];
  LockBoxParameterRestore->Header.Command    = EFI_SMM_LOCK_BOX_COMMAND_RESTORE;
  LockBoxParameterRestore->Header.DataLength = sizeof(*LockBoxParameterRestore);
  LockBoxParameterRestore->Header.ReturnStatus = (UINT64)-1;
  CopyMem (&LockBoxParameterRestore->Guid, Guid, sizeof(*Guid));
  LockBoxParameterRestore->Buffer = (EFI_PHYSICAL_ADDRESS)(UINTN)Buffer;
  if (Length != NULL) {
    LockBoxParameterRestore->Length = (EFI_PHYSICAL_ADDRESS)*Length;
  } else {
    LockBoxParameterRestore->Length = 0;
  }

  //
  // Send command
  //
  CommSize = sizeof(CommBuffer);
  Status = SmmCommunication->Communicate (
                               SmmCommunication,
                               &CommBuffer[0],
                               &CommSize
                               );
  ASSERT_EFI_ERROR (Status);

  if (Length != NULL) {
    *Length = (UINTN)LockBoxParameterRestore->Length;
  }

  Status = (EFI_STATUS)LockBoxParameterRestore->Header.ReturnStatus;

  DEBUG ((EFI_D_INFO, "SmmLockBoxDxeLib RestoreLockBox - Exit (%r)\n", Status));

  //
  // Done
  //
  return Status;
}

/**
  This function will restore confidential information from all lockbox which have RestoreInPlace attribute.

  @retval RETURN_SUCCESS            the information is restored successfully.
  @retval RETURN_NOT_STARTED        it is too early to invoke this interface
  @retval RETURN_UNSUPPORTED        the service is not supported by implementaion.
**/
RETURN_STATUS
EFIAPI
RestoreAllLockBoxInPlace (
  VOID
  )
{
  EFI_STATUS                                      Status;
  EFI_SMM_COMMUNICATION_PROTOCOL                  *SmmCommunication;
  EFI_SMM_LOCK_BOX_PARAMETER_RESTORE_ALL_IN_PLACE *LockBoxParameterRestoreAllInPlace;
  EFI_SMM_COMMUNICATE_HEADER                      *CommHeader;
  UINT8                                           CommBuffer[sizeof(EFI_GUID) + sizeof(UINTN) + sizeof(EFI_SMM_LOCK_BOX_PARAMETER_RESTORE_ALL_IN_PLACE)];
  UINTN                                           CommSize;

  DEBUG ((EFI_D_INFO, "SmmLockBoxDxeLib RestoreAllLockBoxInPlace - Enter\n"));

  //
  // Get needed resource
  //
  Status = gBS->LocateProtocol (
                  &gEfiSmmCommunicationProtocolGuid,
                  NULL,
                  (VOID **)&SmmCommunication
                  );
  if (EFI_ERROR (Status)) {
    return EFI_NOT_STARTED;
  }

  //
  // Prepare parameter
  //
  CommHeader = (EFI_SMM_COMMUNICATE_HEADER *)&CommBuffer[0];
  CopyMem (&CommHeader->HeaderGuid, &gEfiSmmLockBoxCommunicationGuid, sizeof(gEfiSmmLockBoxCommunicationGuid));
  CommHeader->MessageLength = sizeof(*LockBoxParameterRestoreAllInPlace);

  LockBoxParameterRestoreAllInPlace = (EFI_SMM_LOCK_BOX_PARAMETER_RESTORE_ALL_IN_PLACE *)&CommBuffer[OFFSET_OF (EFI_SMM_COMMUNICATE_HEADER, Data)];
  LockBoxParameterRestoreAllInPlace->Header.Command    = EFI_SMM_LOCK_BOX_COMMAND_RESTORE_ALL_IN_PLACE;
  LockBoxParameterRestoreAllInPlace->Header.DataLength = sizeof(*LockBoxParameterRestoreAllInPlace);
  LockBoxParameterRestoreAllInPlace->Header.ReturnStatus = (UINT64)-1;

  //
  // Send command
  //
  CommSize = sizeof(CommBuffer);
  Status = SmmCommunication->Communicate (
                               SmmCommunication,
                               &CommBuffer[0],
                               &CommSize
                               );
  ASSERT_EFI_ERROR (Status);

  Status = (EFI_STATUS)LockBoxParameterRestoreAllInPlace->Header.ReturnStatus;

  DEBUG ((EFI_D_INFO, "SmmLockBoxDxeLib RestoreAllLockBoxInPlace - Exit (%r)\n", Status));

  //
  // Done
  //
  return Status;
}