ARM: socfpga: add CPU_METHOD_OF_DECLARE for Arria 10
Add boot_secondary implementation for the Arria10 platform. Bringing up
the secondary core on the Arria 10 platform is pretty similar to the
Cyclone/Arria 5 platform, with the exception of the following differences:
- Register offset to bringup CPU1 out of reset is different.
- The cpu1-start-addr for Arria10 contains an additional nibble.
Signed-off-by: Dinh Nguyen <[email protected]>
Signed-off-by: Kevin Hilman <[email protected]>
diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c
index b84c1a1..5454e9c 100644
--- a/arch/arm/mach-socfpga/platsmp.c
+++ b/arch/arm/mach-socfpga/platsmp.c
@@ -54,6 +54,29 @@
return 0;
}
+static int socfpga_a10_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
+
+ if (socfpga_cpu1start_addr) {
+ writel(RSTMGR_MPUMODRST_CPU1, rst_manager_base_addr +
+ SOCFPGA_A10_RSTMGR_MODMPURST);
+ memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
+
+ writel(virt_to_phys(socfpga_secondary_startup),
+ sys_manager_base_addr + (socfpga_cpu1start_addr & 0x00000fff));
+
+ flush_cache_all();
+ smp_wmb();
+ outer_clean_range(0, trampoline_size);
+
+ /* This will release CPU #1 out of reset. */
+ writel(0, rst_manager_base_addr + SOCFPGA_A10_RSTMGR_MODMPURST);
+ }
+
+ return 0;
+}
+
static void __init socfpga_smp_prepare_cpus(unsigned int max_cpus)
{
struct device_node *np;
@@ -91,4 +114,13 @@
#endif
};
+static struct smp_operations socfpga_a10_smp_ops __initdata = {
+ .smp_prepare_cpus = socfpga_smp_prepare_cpus,
+ .smp_boot_secondary = socfpga_a10_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = socfpga_cpu_die,
+#endif
+};
+
CPU_METHOD_OF_DECLARE(socfpga_smp, "altr,socfpga-smp", &socfpga_smp_ops);
+CPU_METHOD_OF_DECLARE(socfpga_a10_smp, "altr,socfpga-a10-smp", &socfpga_a10_smp_ops);
