drm/amdgpu/pm: handle fan properly when card is powered down
Return an error if the user tried to check or set the fan
parameters while the card is powered down (e.g., on a PX/HG
system for example). This makes the fan consistent with the
temperature stuff.
Acked-by: Christian König <[email protected]>
Reviewed-by: Rex Zhu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
index fda858e..18873c2 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
@@ -991,6 +991,11 @@ static ssize_t amdgpu_hwmon_set_pwm1_enable(struct device *dev,
int err;
int value;
+ /* Can't adjust fan when the card is off */
+ if ((adev->flags & AMD_IS_PX) &&
+ (adev->ddev->switch_power_state != DRM_SWITCH_POWER_ON))
+ return -EINVAL;
+
if (!adev->powerplay.pp_funcs->set_fan_control_mode)
return -EINVAL;
@@ -1025,6 +1030,11 @@ static ssize_t amdgpu_hwmon_set_pwm1(struct device *dev,
int err;
u32 value;
+ /* Can't adjust fan when the card is off */
+ if ((adev->flags & AMD_IS_PX) &&
+ (adev->ddev->switch_power_state != DRM_SWITCH_POWER_ON))
+ return -EINVAL;
+
err = kstrtou32(buf, 10, &value);
if (err)
return err;
@@ -1048,6 +1058,11 @@ static ssize_t amdgpu_hwmon_get_pwm1(struct device *dev,
int err;
u32 speed = 0;
+ /* Can't adjust fan when the card is off */
+ if ((adev->flags & AMD_IS_PX) &&
+ (adev->ddev->switch_power_state != DRM_SWITCH_POWER_ON))
+ return -EINVAL;
+
if (adev->powerplay.pp_funcs->get_fan_speed_percent) {
err = amdgpu_dpm_get_fan_speed_percent(adev, &speed);
if (err)
@@ -1067,6 +1082,11 @@ static ssize_t amdgpu_hwmon_get_fan1_input(struct device *dev,
int err;
u32 speed = 0;
+ /* Can't adjust fan when the card is off */
+ if ((adev->flags & AMD_IS_PX) &&
+ (adev->ddev->switch_power_state != DRM_SWITCH_POWER_ON))
+ return -EINVAL;
+
if (adev->powerplay.pp_funcs->get_fan_speed_rpm) {
err = amdgpu_dpm_get_fan_speed_rpm(adev, &speed);
if (err)
