Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (73 commits)
net: Fix typo in net/core/sock.c.
ppp: Do not free not yet unregistered net device.
netfilter: xt_iprange: module aliases for xt_iprange
netfilter: ctnetlink: dump conntrack ID in event messages
irda: Fix a misalign access issue. (v2)
sctp: Fix use of uninitialized pointer
cipso: Relax too much careful cipso hash function.
tcp FRTO: work-around inorder receivers
tcp FRTO: Fix fallback to conventional recovery
New maintainer for Intel ethernet adapters
DM9000: Use delayed work to update MII PHY state
DM9000: Update and fix driver debugging messages
DM9000: Add __devinit and __devexit attributes to probe and remove
sky2: fix simple define thinko
[netdrvr] sfc: sfc: Add self-test support
[netdrvr] sfc: Increment rx_reset when reported as driver event
[netdrvr] sfc: Remove unused macro EFX_XAUI_RETRAIN_MAX
[netdrvr] sfc: Fix code formatting
[netdrvr] sfc: Remove kernel-doc comments for removed members of struct efx_nic
[netdrvr] sfc: Remove garbage from comment
...
diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl
index 97618be..028a844 100644
--- a/Documentation/DocBook/kgdb.tmpl
+++ b/Documentation/DocBook/kgdb.tmpl
@@ -72,7 +72,7 @@
kgdb is a source level debugger for linux kernel. It is used along
with gdb to debug a linux kernel. The expectation is that gdb can
be used to "break in" to the kernel to inspect memory, variables
- and look through a cal stack information similar to what an
+ and look through call stack information similar to what an
application developer would use gdb for. It is possible to place
breakpoints in kernel code and perform some limited execution
stepping.
@@ -93,8 +93,10 @@
<chapter id="CompilingAKernel">
<title>Compiling a kernel</title>
<para>
- To enable <symbol>CONFIG_KGDB</symbol>, look under the "Kernel debugging"
- and then select "KGDB: kernel debugging with remote gdb".
+ To enable <symbol>CONFIG_KGDB</symbol> you should first turn on
+ "Prompt for development and/or incomplete code/drivers"
+ (CONFIG_EXPERIMENTAL) in "General setup", then under the
+ "Kernel debugging" select "KGDB: kernel debugging with remote gdb".
</para>
<para>
Next you should choose one of more I/O drivers to interconnect debugging
diff --git a/Documentation/cgroups.txt b/Documentation/cgroups.txt
index c298a66..824fc02 100644
--- a/Documentation/cgroups.txt
+++ b/Documentation/cgroups.txt
@@ -310,8 +310,8 @@
cd /dev/cgroup
mkdir Charlie
cd Charlie
- /bin/echo 2-3 > cpus
- /bin/echo 1 > mems
+ /bin/echo 2-3 > cpuset.cpus
+ /bin/echo 1 > cpuset.mems
/bin/echo $$ > tasks
sh
# The subshell 'sh' is now running in cgroup Charlie
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index c2992bc..8b22d7d8 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -92,7 +92,6 @@
void (*destroy_inode)(struct inode *);
void (*dirty_inode) (struct inode *);
int (*write_inode) (struct inode *, int);
- void (*put_inode) (struct inode *);
void (*drop_inode) (struct inode *);
void (*delete_inode) (struct inode *);
void (*put_super) (struct super_block *);
@@ -115,7 +114,6 @@
destroy_inode: no
dirty_inode: no (must not sleep)
write_inode: no
-put_inode: no
drop_inode: no !!!inode_lock!!!
delete_inode: no
put_super: yes yes no
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index 81e5be6..b7522c6 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -205,7 +205,6 @@
void (*dirty_inode) (struct inode *);
int (*write_inode) (struct inode *, int);
- void (*put_inode) (struct inode *);
void (*drop_inode) (struct inode *);
void (*delete_inode) (struct inode *);
void (*put_super) (struct super_block *);
@@ -246,9 +245,6 @@
inode to disc. The second parameter indicates whether the write
should be synchronous or not, not all filesystems check this flag.
- put_inode: called when the VFS inode is removed from the inode
- cache.
-
drop_inode: called when the last access to the inode is dropped,
with the inode_lock spinlock held.
diff --git a/Documentation/hwmon/adt7473 b/Documentation/hwmon/adt7473
index 22d8b19..2126de3 100644
--- a/Documentation/hwmon/adt7473
+++ b/Documentation/hwmon/adt7473
@@ -69,7 +69,8 @@
The ADT7473 will scale the pwm between the lower and higher pwm speed when
the temperature is between the two temperature boundaries. PWM values range
-from 0 (off) to 255 (full speed).
+from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the
+temperature sensor associated with the PWM control exceeds temp#_max.
Notes
-----
diff --git a/Documentation/hwmon/w83l785ts b/Documentation/hwmon/w83l785ts
index 1841ced..bd1fa9d 100644
--- a/Documentation/hwmon/w83l785ts
+++ b/Documentation/hwmon/w83l785ts
@@ -33,7 +33,8 @@
------------
On some systems (Asus), the BIOS is known to interfere with the driver
-and cause read errors. The driver will retry a given number of times
+and cause read errors. Or maybe the W83L785TS-S chip is simply unreliable,
+we don't really know. The driver will retry a given number of times
(5 by default) and then give up, returning the old value (or 0 if
there is no old value). It seems to work well enough so that you should
not notice anything. Thanks to James Bolt for helping test this feature.
diff --git a/Documentation/i2c/functionality b/Documentation/i2c/functionality
index 60cca24..42c17c1 100644
--- a/Documentation/i2c/functionality
+++ b/Documentation/i2c/functionality
@@ -51,26 +51,38 @@
the transparent emulation layer)
-ALGORITHM/ADAPTER IMPLEMENTATION
---------------------------------
+ADAPTER IMPLEMENTATION
+----------------------
-When you write a new algorithm driver, you will have to implement a
-function callback `functionality', that gets an i2c_adapter structure
-pointer as its only parameter:
+When you write a new adapter driver, you will have to implement a
+function callback `functionality'. Typical implementations are given
+below.
- struct i2c_algorithm {
- /* Many other things of course; check <linux/i2c.h>! */
- u32 (*functionality) (struct i2c_adapter *);
- }
+A typical SMBus-only adapter would list all the SMBus transactions it
+supports. This example comes from the i2c-piix4 driver:
-A typically implementation is given below, from i2c-algo-bit.c:
-
- static u32 bit_func(struct i2c_adapter *adap)
+ static u32 piix4_func(struct i2c_adapter *adapter)
{
- return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR |
- I2C_FUNC_PROTOCOL_MANGLING;
+ return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA;
}
+A typical full-I2C adapter would use the following (from the i2c-pxa
+driver):
+
+ static u32 i2c_pxa_functionality(struct i2c_adapter *adap)
+ {
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+ }
+
+I2C_FUNC_SMBUS_EMUL includes all the SMBus transactions (with the
+addition of I2C block transactions) which i2c-core can emulate using
+I2C_FUNC_I2C without any help from the adapter driver. The idea is
+to let the client drivers check for the support of SMBus functions
+without having to care whether the said functions are implemented in
+hardware by the adapter, or emulated in software by i2c-core on top
+of an I2C adapter.
CLIENT CHECKING
@@ -78,36 +90,33 @@
Before a client tries to attach to an adapter, or even do tests to check
whether one of the devices it supports is present on an adapter, it should
-check whether the needed functionality is present. There are two functions
-defined which should be used instead of calling the functionality hook
-in the algorithm structure directly:
+check whether the needed functionality is present. The typical way to do
+this is (from the lm75 driver):
- /* Return the functionality mask */
- extern u32 i2c_get_functionality (struct i2c_adapter *adap);
-
- /* Return 1 if adapter supports everything we need, 0 if not. */
- extern int i2c_check_functionality (struct i2c_adapter *adap, u32 func);
-
-This is a typical way to use these functions (from the writing-clients
-document):
- int foo_detect_client(struct i2c_adapter *adapter, int address,
- unsigned short flags, int kind)
+ static int lm75_detect(...)
{
- /* Define needed variables */
-
- /* As the very first action, we check whether the adapter has the
- needed functionality: we need the SMBus read_word_data,
- write_word_data and write_byte functions in this example. */
- if (!i2c_check_functionality(adapter,I2C_FUNC_SMBUS_WORD_DATA |
- I2C_FUNC_SMBUS_WRITE_BYTE))
- goto ERROR0;
-
- /* Now we can do the real detection */
-
- ERROR0:
- /* Return an error */
+ (...)
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA))
+ goto exit;
+ (...)
}
+Here, the lm75 driver checks if the adapter can do both SMBus byte data
+and SMBus word data transactions. If not, then the driver won't work on
+this adapter and there's no point in going on. If the check above is
+successful, then the driver knows that it can call the following
+functions: i2c_smbus_read_byte_data(), i2c_smbus_write_byte_data(),
+i2c_smbus_read_word_data() and i2c_smbus_write_word_data(). As a rule of
+thumb, the functionality constants you test for with
+i2c_check_functionality() should match exactly the i2c_smbus_* functions
+which you driver is calling.
+
+Note that the check above doesn't tell whether the functionalities are
+implemented in hardware by the underlying adapter or emulated in
+software by i2c-core. Client drivers don't have to care about this, as
+i2c-core will transparently implement SMBus transactions on top of I2C
+adapters.
CHECKING THROUGH /DEV
@@ -116,19 +125,19 @@
If you try to access an adapter from a userspace program, you will have
to use the /dev interface. You will still have to check whether the
functionality you need is supported, of course. This is done using
-the I2C_FUNCS ioctl. An example, adapted from the lm_sensors i2cdetect
-program, is below:
+the I2C_FUNCS ioctl. An example, adapted from the i2cdetect program, is
+below:
int file;
- if (file = open("/dev/i2c-0",O_RDWR) < 0) {
+ if (file = open("/dev/i2c-0", O_RDWR) < 0) {
/* Some kind of error handling */
exit(1);
}
- if (ioctl(file,I2C_FUNCS,&funcs) < 0) {
+ if (ioctl(file, I2C_FUNCS, &funcs) < 0) {
/* Some kind of error handling */
exit(1);
}
- if (! (funcs & I2C_FUNC_SMBUS_QUICK)) {
+ if (!(funcs & I2C_FUNC_SMBUS_QUICK)) {
/* Oops, the needed functionality (SMBus write_quick function) is
not available! */
exit(1);
diff --git a/Documentation/i2c/smbus-protocol b/Documentation/i2c/smbus-protocol
index 8a653c6..03f08fb 100644
--- a/Documentation/i2c/smbus-protocol
+++ b/Documentation/i2c/smbus-protocol
@@ -1,5 +1,6 @@
SMBus Protocol Summary
======================
+
The following is a summary of the SMBus protocol. It applies to
all revisions of the protocol (1.0, 1.1, and 2.0).
Certain protocol features which are not supported by
@@ -8,6 +9,7 @@
Some adapters understand only the SMBus (System Management Bus) protocol,
which is a subset from the I2C protocol. Fortunately, many devices use
only the same subset, which makes it possible to put them on an SMBus.
+
If you write a driver for some I2C device, please try to use the SMBus
commands if at all possible (if the device uses only that subset of the
I2C protocol). This makes it possible to use the device driver on both
@@ -15,7 +17,12 @@
translated to I2C on I2C adapters, but plain I2C commands can not be
handled at all on most pure SMBus adapters).
-Below is a list of SMBus commands.
+Below is a list of SMBus protocol operations, and the functions executing
+them. Note that the names used in the SMBus protocol specifications usually
+don't match these function names. For some of the operations which pass a
+single data byte, the functions using SMBus protocol operation names execute
+a different protocol operation entirely.
+
Key to symbols
==============
@@ -35,17 +42,16 @@
[..]: Data sent by I2C device, as opposed to data sent by the host adapter.
-SMBus Write Quick
-=================
+SMBus Quick Command: i2c_smbus_write_quick()
+=============================================
This sends a single bit to the device, at the place of the Rd/Wr bit.
-There is no equivalent Read Quick command.
A Addr Rd/Wr [A] P
-SMBus Read Byte
-===============
+SMBus Receive Byte: i2c_smbus_read_byte()
+==========================================
This reads a single byte from a device, without specifying a device
register. Some devices are so simple that this interface is enough; for
@@ -55,17 +61,17 @@
S Addr Rd [A] [Data] NA P
-SMBus Write Byte
-================
+SMBus Send Byte: i2c_smbus_write_byte()
+========================================
-This is the reverse of Read Byte: it sends a single byte to a device.
-See Read Byte for more information.
+This operation is the reverse of Receive Byte: it sends a single byte
+to a device. See Receive Byte for more information.
S Addr Wr [A] Data [A] P
-SMBus Read Byte Data
-====================
+SMBus Read Byte: i2c_smbus_read_byte_data()
+============================================
This reads a single byte from a device, from a designated register.
The register is specified through the Comm byte.
@@ -73,30 +79,30 @@
S Addr Wr [A] Comm [A] S Addr Rd [A] [Data] NA P
-SMBus Read Word Data
-====================
+SMBus Read Word: i2c_smbus_read_word_data()
+============================================
-This command is very like Read Byte Data; again, data is read from a
+This operation is very like Read Byte; again, data is read from a
device, from a designated register that is specified through the Comm
byte. But this time, the data is a complete word (16 bits).
S Addr Wr [A] Comm [A] S Addr Rd [A] [DataLow] A [DataHigh] NA P
-SMBus Write Byte Data
-=====================
+SMBus Write Byte: i2c_smbus_write_byte_data()
+==============================================
This writes a single byte to a device, to a designated register. The
register is specified through the Comm byte. This is the opposite of
-the Read Byte Data command.
+the Read Byte operation.
S Addr Wr [A] Comm [A] Data [A] P
-SMBus Write Word Data
-=====================
+SMBus Write Word: i2c_smbus_write_word_data()
+==============================================
-This is the opposite operation of the Read Word Data command. 16 bits
+This is the opposite of the Read Word operation. 16 bits
of data is written to a device, to the designated register that is
specified through the Comm byte.
@@ -113,8 +119,8 @@
S Addr Rd [A] [DataLow] A [DataHigh] NA P
-SMBus Block Read
-================
+SMBus Block Read: i2c_smbus_read_block_data()
+==============================================
This command reads a block of up to 32 bytes from a device, from a
designated register that is specified through the Comm byte. The amount
@@ -124,8 +130,8 @@
S Addr Rd [A] [Count] A [Data] A [Data] A ... A [Data] NA P
-SMBus Block Write
-=================
+SMBus Block Write: i2c_smbus_write_block_data()
+================================================
The opposite of the Block Read command, this writes up to 32 bytes to
a device, to a designated register that is specified through the
@@ -134,10 +140,11 @@
S Addr Wr [A] Comm [A] Count [A] Data [A] Data [A] ... [A] Data [A] P
-SMBus Block Process Call
-========================
+SMBus Block Write - Block Read Process Call
+===========================================
-SMBus Block Process Call was introduced in Revision 2.0 of the specification.
+SMBus Block Write - Block Read Process Call was introduced in
+Revision 2.0 of the specification.
This command selects a device register (through the Comm byte), sends
1 to 31 bytes of data to it, and reads 1 to 31 bytes of data in return.
@@ -159,13 +166,16 @@
Packet Error Checking (PEC)
===========================
+
Packet Error Checking was introduced in Revision 1.1 of the specification.
-PEC adds a CRC-8 error-checking byte to all transfers.
+PEC adds a CRC-8 error-checking byte to transfers using it, immediately
+before the terminating STOP.
Address Resolution Protocol (ARP)
=================================
+
The Address Resolution Protocol was introduced in Revision 2.0 of
the specification. It is a higher-layer protocol which uses the
messages above.
@@ -177,14 +187,17 @@
I2C Block Transactions
======================
+
The following I2C block transactions are supported by the
SMBus layer and are described here for completeness.
+They are *NOT* defined by the SMBus specification.
+
I2C block transactions do not limit the number of bytes transferred
but the SMBus layer places a limit of 32 bytes.
-I2C Block Read
-==============
+I2C Block Read: i2c_smbus_read_i2c_block_data()
+================================================
This command reads a block of bytes from a device, from a
designated register that is specified through the Comm byte.
@@ -203,8 +216,8 @@
S Addr Rd [A] [Data] A [Data] A ... A [Data] NA P
-I2C Block Write
-===============
+I2C Block Write: i2c_smbus_write_i2c_block_data()
+==================================================
The opposite of the Block Read command, this writes bytes to
a device, to a designated register that is specified through the
@@ -212,5 +225,3 @@
supported as they are indistinguishable from data.
S Addr Wr [A] Comm [A] Data [A] Data [A] ... [A] Data [A] P
-
-
diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt
index 00b950d..c412c24 100644
--- a/Documentation/kbuild/kconfig-language.txt
+++ b/Documentation/kbuild/kconfig-language.txt
@@ -377,27 +377,3 @@
limits FOO to module (=m) or disabled (=n).
-
-Build limited by a third config symbol which may be =y or =m
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-A common idiom that we see (and sometimes have problems with) is this:
-
-When option C in B (module or subsystem) uses interfaces from A (module
-or subsystem), and both A and B are tristate (could be =y or =m if they
-were independent of each other, but they aren't), then we need to limit
-C such that it cannot be built statically if A is built as a loadable
-module. (C already depends on B, so there is no dependency issue to
-take care of here.)
-
-If A is linked statically into the kernel image, C can be built
-statically or as loadable module(s). However, if A is built as loadable
-module(s), then C must be restricted to loadable module(s) also. This
-can be expressed in kconfig language as:
-
-config C
- depends on A = y || A = B
-
-or for real examples, use this command in a kernel tree:
-
-$ find . -name Kconfig\* | xargs grep -ns "depends on.*=.*||.*=" | grep -v orig
-
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index d0ac72c..b8e52c0 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -245,6 +245,8 @@
crashkernel=<range1>:<size1>[,<range2>:<size2>,...][@offset]
range=start-[end]
+ 'start' is inclusive and 'end' is exclusive.
+
For example:
crashkernel=512M-2G:64M,2G-:128M
@@ -253,10 +255,11 @@
1) if the RAM is smaller than 512M, then don't reserve anything
(this is the "rescue" case)
- 2) if the RAM size is between 512M and 2G, then reserve 64M
+ 2) if the RAM size is between 512M and 2G (exclusive), then reserve 64M
3) if the RAM size is larger than 2G, then reserve 128M
+
Boot into System Kernel
=======================
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a3c3544..cdd5b93 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1094,9 +1094,6 @@
mac5380= [HW,SCSI] Format:
<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
- mac53c9x= [HW,SCSI] Format:
- <num_esps>,<disconnect>,<nosync>,<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
-
machvec= [IA64] Force the use of a particular machine-vector
(machvec) in a generic kernel.
Example: machvec=hpzx1_swiotlb
@@ -1525,6 +1522,8 @@
This is normally done in pci_enable_device(),
so this option is a temporary workaround
for broken drivers that don't call it.
+ skip_isa_align [X86] do not align io start addr, so can
+ handle more pci cards
firmware [ARM] Do not re-enumerate the bus but instead
just use the configuration from the
bootloader. This is currently used on
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 4c1fc65..3be8ab2 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -131,6 +131,9 @@
/* Any queues attached to this device */
struct virtqueue *vq;
+ /* Handle status being finalized (ie. feature bits stable). */
+ void (*ready)(struct device *me);
+
/* Device-specific data. */
void *priv;
};
@@ -925,24 +928,40 @@
write(waker_fd, &vq->dev->fd, sizeof(vq->dev->fd));
}
-/* When the Guest asks us to reset a device, it's is fairly easy. */
-static void reset_device(struct device *dev)
+/* When the Guest tells us they updated the status field, we handle it. */
+static void update_device_status(struct device *dev)
{
struct virtqueue *vq;
- verbose("Resetting device %s\n", dev->name);
- /* Clear the status. */
- dev->desc->status = 0;
+ /* This is a reset. */
+ if (dev->desc->status == 0) {
+ verbose("Resetting device %s\n", dev->name);
- /* Clear any features they've acked. */
- memset(get_feature_bits(dev) + dev->desc->feature_len, 0,
- dev->desc->feature_len);
+ /* Clear any features they've acked. */
+ memset(get_feature_bits(dev) + dev->desc->feature_len, 0,
+ dev->desc->feature_len);
- /* Zero out the virtqueues. */
- for (vq = dev->vq; vq; vq = vq->next) {
- memset(vq->vring.desc, 0,
- vring_size(vq->config.num, getpagesize()));
- vq->last_avail_idx = 0;
+ /* Zero out the virtqueues. */
+ for (vq = dev->vq; vq; vq = vq->next) {
+ memset(vq->vring.desc, 0,
+ vring_size(vq->config.num, getpagesize()));
+ vq->last_avail_idx = 0;
+ }
+ } else if (dev->desc->status & VIRTIO_CONFIG_S_FAILED) {
+ warnx("Device %s configuration FAILED", dev->name);
+ } else if (dev->desc->status & VIRTIO_CONFIG_S_DRIVER_OK) {
+ unsigned int i;
+
+ verbose("Device %s OK: offered", dev->name);
+ for (i = 0; i < dev->desc->feature_len; i++)
+ verbose(" %08x", get_feature_bits(dev)[i]);
+ verbose(", accepted");
+ for (i = 0; i < dev->desc->feature_len; i++)
+ verbose(" %08x", get_feature_bits(dev)
+ [dev->desc->feature_len+i]);
+
+ if (dev->ready)
+ dev->ready(dev);
}
}
@@ -954,9 +973,9 @@
/* Check each device and virtqueue. */
for (i = devices.dev; i; i = i->next) {
- /* Notifications to device descriptors reset the device. */
+ /* Notifications to device descriptors update device status. */
if (from_guest_phys(addr) == i->desc) {
- reset_device(i);
+ update_device_status(i);
return;
}
@@ -1170,6 +1189,7 @@
dev->handle_input = handle_input;
dev->name = name;
dev->vq = NULL;
+ dev->ready = NULL;
/* Append to device list. Prepending to a single-linked list is
* easier, but the user expects the devices to be arranged on the bus
@@ -1398,7 +1418,7 @@
struct vblk_info *vblk = dev->priv;
unsigned int head, out_num, in_num, wlen;
int ret;
- struct virtio_blk_inhdr *in;
+ u8 *in;
struct virtio_blk_outhdr *out;
struct iovec iov[dev->vq->vring.num];
off64_t off;
@@ -1416,7 +1436,7 @@
head, out_num, in_num);
out = convert(&iov[0], struct virtio_blk_outhdr);
- in = convert(&iov[out_num+in_num-1], struct virtio_blk_inhdr);
+ in = convert(&iov[out_num+in_num-1], u8);
off = out->sector * 512;
/* The block device implements "barriers", where the Guest indicates
@@ -1430,7 +1450,7 @@
* It'd be nice if we supported eject, for example, but we don't. */
if (out->type & VIRTIO_BLK_T_SCSI_CMD) {
fprintf(stderr, "Scsi commands unsupported\n");
- in->status = VIRTIO_BLK_S_UNSUPP;
+ *in = VIRTIO_BLK_S_UNSUPP;
wlen = sizeof(*in);
} else if (out->type & VIRTIO_BLK_T_OUT) {
/* Write */
@@ -1453,7 +1473,7 @@
errx(1, "Write past end %llu+%u", off, ret);
}
wlen = sizeof(*in);
- in->status = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
+ *in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
} else {
/* Read */
@@ -1466,10 +1486,10 @@
verbose("READ from sector %llu: %i\n", out->sector, ret);
if (ret >= 0) {
wlen = sizeof(*in) + ret;
- in->status = VIRTIO_BLK_S_OK;
+ *in = VIRTIO_BLK_S_OK;
} else {
wlen = sizeof(*in);
- in->status = VIRTIO_BLK_S_IOERR;
+ *in = VIRTIO_BLK_S_IOERR;
}
}
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index e5a819a..f5b7127 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -994,7 +994,17 @@
DATA DEPENDENCY read_barrier_depends() smp_read_barrier_depends()
-All CPU memory barriers unconditionally imply compiler barriers.
+All memory barriers except the data dependency barriers imply a compiler
+barrier. Data dependencies do not impose any additional compiler ordering.
+
+Aside: In the case of data dependencies, the compiler would be expected to
+issue the loads in the correct order (eg. `a[b]` would have to load the value
+of b before loading a[b]), however there is no guarantee in the C specification
+that the compiler may not speculate the value of b (eg. is equal to 1) and load
+a before b (eg. tmp = a[1]; if (b != 1) tmp = a[b]; ). There is also the
+problem of a compiler reloading b after having loaded a[b], thus having a newer
+copy of b than a[b]. A consensus has not yet been reached about these problems,
+however the ACCESS_ONCE macro is a good place to start looking.
SMP memory barriers are reduced to compiler barriers on uniprocessor compiled
systems because it is assumed that a CPU will appear to be self-consistent,
diff --git a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
index cda7a7d..6f12f1c 100644
--- a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
+++ b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
@@ -237,6 +237,17 @@
according to the bit numbers in the GPIO control registers. The second cell
is for flags which is currently unsused.
+8) FEC nodes
+The FEC node can specify one of the following properties to configure
+the MII link:
+"fsl,7-wire-mode" - An empty property that specifies the link uses 7-wire
+ mode instead of MII
+"current-speed" - Specifies that the MII should be configured for a fixed
+ speed. This property should contain two cells. The
+ first cell specifies the speed in Mbps and the second
+ should be '0' for half duplex and '1' for full duplex
+"phy-handle" - Contains a phandle to an Ethernet PHY.
+
IV - Extra Notes
================
diff --git a/Documentation/s390/CommonIO b/Documentation/s390/CommonIO
index 8fbc0a8..bf0baa1 100644
--- a/Documentation/s390/CommonIO
+++ b/Documentation/s390/CommonIO
@@ -8,17 +8,6 @@
Enable logging of debug information in case of ccw device timeouts.
-
-* cio_msg = yes | no
-
- Determines whether information on found devices and sensed device
- characteristics should be shown during startup or when new devices are
- found, i. e. messages of the types "Detected device 0.0.4711 on subchannel
- 0.0.0042" and "SenseID: Device 0.0.4711 reports: ...".
-
- Default is off.
-
-
* cio_ignore = {all} |
{<device> | <range of devices>} |
{!<device> | !<range of devices>}
diff --git a/Documentation/scheduler/sched-design.txt b/Documentation/scheduler/sched-design.txt
deleted file mode 100644
index 1605bf0..0000000
--- a/Documentation/scheduler/sched-design.txt
+++ /dev/null
@@ -1,165 +0,0 @@
- Goals, Design and Implementation of the
- new ultra-scalable O(1) scheduler
-
-
- This is an edited version of an email Ingo Molnar sent to
- lkml on 4 Jan 2002. It describes the goals, design, and
- implementation of Ingo's new ultra-scalable O(1) scheduler.
- Last Updated: 18 April 2002.
-
-
-Goal
-====
-
-The main goal of the new scheduler is to keep all the good things we know
-and love about the current Linux scheduler:
-
- - good interactive performance even during high load: if the user
- types or clicks then the system must react instantly and must execute
- the user tasks smoothly, even during considerable background load.
-
- - good scheduling/wakeup performance with 1-2 runnable processes.
-
- - fairness: no process should stay without any timeslice for any
- unreasonable amount of time. No process should get an unjustly high
- amount of CPU time.
-
- - priorities: less important tasks can be started with lower priority,
- more important tasks with higher priority.
-
- - SMP efficiency: no CPU should stay idle if there is work to do.
-
- - SMP affinity: processes which run on one CPU should stay affine to
- that CPU. Processes should not bounce between CPUs too frequently.
-
- - plus additional scheduler features: RT scheduling, CPU binding.
-
-and the goal is also to add a few new things:
-
- - fully O(1) scheduling. Are you tired of the recalculation loop
- blowing the L1 cache away every now and then? Do you think the goodness
- loop is taking a bit too long to finish if there are lots of runnable
- processes? This new scheduler takes no prisoners: wakeup(), schedule(),
- the timer interrupt are all O(1) algorithms. There is no recalculation
- loop. There is no goodness loop either.
-
- - 'perfect' SMP scalability. With the new scheduler there is no 'big'
- runqueue_lock anymore - it's all per-CPU runqueues and locks - two
- tasks on two separate CPUs can wake up, schedule and context-switch
- completely in parallel, without any interlocking. All
- scheduling-relevant data is structured for maximum scalability.
-
- - better SMP affinity. The old scheduler has a particular weakness that
- causes the random bouncing of tasks between CPUs if/when higher
- priority/interactive tasks, this was observed and reported by many
- people. The reason is that the timeslice recalculation loop first needs
- every currently running task to consume its timeslice. But when this
- happens on eg. an 8-way system, then this property starves an
- increasing number of CPUs from executing any process. Once the last
- task that has a timeslice left has finished using up that timeslice,
- the recalculation loop is triggered and other CPUs can start executing
- tasks again - after having idled around for a number of timer ticks.
- The more CPUs, the worse this effect.
-
- Furthermore, this same effect causes the bouncing effect as well:
- whenever there is such a 'timeslice squeeze' of the global runqueue,
- idle processors start executing tasks which are not affine to that CPU.
- (because the affine tasks have finished off their timeslices already.)
-
- The new scheduler solves this problem by distributing timeslices on a
- per-CPU basis, without having any global synchronization or
- recalculation.
-
- - batch scheduling. A significant proportion of computing-intensive tasks
- benefit from batch-scheduling, where timeslices are long and processes
- are roundrobin scheduled. The new scheduler does such batch-scheduling
- of the lowest priority tasks - so nice +19 jobs will get
- 'batch-scheduled' automatically. With this scheduler, nice +19 jobs are
- in essence SCHED_IDLE, from an interactiveness point of view.
-
- - handle extreme loads more smoothly, without breakdown and scheduling
- storms.
-
- - O(1) RT scheduling. For those RT folks who are paranoid about the
- O(nr_running) property of the goodness loop and the recalculation loop.
-
- - run fork()ed children before the parent. Andrea has pointed out the
- advantages of this a few months ago, but patches for this feature
- do not work with the old scheduler as well as they should,
- because idle processes often steal the new child before the fork()ing
- CPU gets to execute it.
-
-
-Design
-======
-
-The core of the new scheduler contains the following mechanisms:
-
- - *two* priority-ordered 'priority arrays' per CPU. There is an 'active'
- array and an 'expired' array. The active array contains all tasks that
- are affine to this CPU and have timeslices left. The expired array
- contains all tasks which have used up their timeslices - but this array
- is kept sorted as well. The active and expired array is not accessed
- directly, it's accessed through two pointers in the per-CPU runqueue
- structure. If all active tasks are used up then we 'switch' the two
- pointers and from now on the ready-to-go (former-) expired array is the
- active array - and the empty active array serves as the new collector
- for expired tasks.
-
- - there is a 64-bit bitmap cache for array indices. Finding the highest
- priority task is thus a matter of two x86 BSFL bit-search instructions.
-
-the split-array solution enables us to have an arbitrary number of active
-and expired tasks, and the recalculation of timeslices can be done
-immediately when the timeslice expires. Because the arrays are always
-access through the pointers in the runqueue, switching the two arrays can
-be done very quickly.
-
-this is a hybride priority-list approach coupled with roundrobin
-scheduling and the array-switch method of distributing timeslices.
-
- - there is a per-task 'load estimator'.
-
-one of the toughest things to get right is good interactive feel during
-heavy system load. While playing with various scheduler variants i found
-that the best interactive feel is achieved not by 'boosting' interactive
-tasks, but by 'punishing' tasks that want to use more CPU time than there
-is available. This method is also much easier to do in an O(1) fashion.
-
-to establish the actual 'load' the task contributes to the system, a
-complex-looking but pretty accurate method is used: there is a 4-entry
-'history' ringbuffer of the task's activities during the last 4 seconds.
-This ringbuffer is operated without much overhead. The entries tell the
-scheduler a pretty accurate load-history of the task: has it used up more
-CPU time or less during the past N seconds. [the size '4' and the interval
-of 4x 1 seconds was found by lots of experimentation - this part is
-flexible and can be changed in both directions.]
-
-the penalty a task gets for generating more load than the CPU can handle
-is a priority decrease - there is a maximum amount to this penalty
-relative to their static priority, so even fully CPU-bound tasks will
-observe each other's priorities, and will share the CPU accordingly.
-
-the SMP load-balancer can be extended/switched with additional parallel
-computing and cache hierarchy concepts: NUMA scheduling, multi-core CPUs
-can be supported easily by changing the load-balancer. Right now it's
-tuned for my SMP systems.
-
-i skipped the prev->mm == next->mm advantage - no workload i know of shows
-any sensitivity to this. It can be added back by sacrificing O(1)
-schedule() [the current and one-lower priority list can be searched for a
-that->mm == current->mm condition], but costs a fair number of cycles
-during a number of important workloads, so i wanted to avoid this as much
-as possible.
-
-- the SMP idle-task startup code was still racy and the new scheduler
-triggered this. So i streamlined the idle-setup code a bit. We do not call
-into schedule() before all processors have started up fully and all idle
-threads are in place.
-
-- the patch also cleans up a number of aspects of sched.c - moves code
-into other areas of the kernel where it's appropriate, and simplifies
-certain code paths and data constructs. As a result, the new scheduler's
-code is smaller than the old one.
-
- Ingo
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
index 91c81db..716fcc1 100644
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -1,3 +1,25 @@
+1 Release Date : Mon. March 10 11:02:31 PDT 2008 -
+ (emaild-id:megaraidlinux@lsi.com)
+ Sumant Patro
+ Bo Yang
+
+2 Current Version : 00.00.03.20-RC1
+3 Older Version : 00.00.03.16
+
+1. Rollback the sense info implementation
+ Sense buffer ptr data type in the ioctl path is reverted back
+ to u32 * as in previous versions of driver.
+
+2. Fixed the driver frame count.
+ When Driver sent wrong frame count to firmware. As this
+ particular command is sent to drive, FW is seeing continuous
+ chip resets and so the command will timeout.
+
+3. Add the new controller(1078DE) support to the driver
+ and Increase the max_wait to 60 from 10 in the controller
+ operational status. With this max_wait increase, driver will
+ make sure the FW will finish the pending cmd for KDUMP case.
+
1 Release Date : Thur. Nov. 07 16:30:43 PST 2007 -
(emaild-id:megaraidlinux@lsi.com)
Sumant Patro
diff --git a/Documentation/vm/slabinfo.c b/Documentation/vm/slabinfo.c
index d3ce295..e4230ed 100644
--- a/Documentation/vm/slabinfo.c
+++ b/Documentation/vm/slabinfo.c
@@ -38,7 +38,7 @@
unsigned long alloc_from_partial, alloc_slab, free_slab, alloc_refill;
unsigned long cpuslab_flush, deactivate_full, deactivate_empty;
unsigned long deactivate_to_head, deactivate_to_tail;
- unsigned long deactivate_remote_frees;
+ unsigned long deactivate_remote_frees, order_fallback;
int numa[MAX_NODES];
int numa_partial[MAX_NODES];
} slabinfo[MAX_SLABS];
@@ -293,7 +293,7 @@
void first_line(void)
{
if (show_activity)
- printf("Name Objects Alloc Free %%Fast\n");
+ printf("Name Objects Alloc Free %%Fast Fallb O\n");
else
printf("Name Objects Objsize Space "
"Slabs/Part/Cpu O/S O %%Fr %%Ef Flg\n");
@@ -573,11 +573,12 @@
total_alloc = s->alloc_fastpath + s->alloc_slowpath;
total_free = s->free_fastpath + s->free_slowpath;
- printf("%-21s %8ld %8ld %8ld %3ld %3ld \n",
+ printf("%-21s %8ld %10ld %10ld %3ld %3ld %5ld %1d\n",
s->name, s->objects,
total_alloc, total_free,
total_alloc ? (s->alloc_fastpath * 100 / total_alloc) : 0,
- total_free ? (s->free_fastpath * 100 / total_free) : 0);
+ total_free ? (s->free_fastpath * 100 / total_free) : 0,
+ s->order_fallback, s->order);
}
else
printf("%-21s %8ld %7d %8s %14s %4d %1d %3ld %3ld %s\n",
@@ -1188,6 +1189,7 @@
slab->deactivate_to_head = get_obj("deactivate_to_head");
slab->deactivate_to_tail = get_obj("deactivate_to_tail");
slab->deactivate_remote_frees = get_obj("deactivate_remote_frees");
+ slab->order_fallback = get_obj("order_fallback");
chdir("..");
if (slab->name[0] == ':')
alias_targets++;
diff --git a/MAINTAINERS b/MAINTAINERS
index 0cc47b9..b18242f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -367,12 +367,12 @@
AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
P: Thomas Dahlmann
M: thomas.dahlmann@amd.com
-L: info-linux@geode.amd.com (subscribers-only)
+L: linux-geode@lists.infradead.org (moderated for non-subscribers)
S: Supported
AMD GEODE PROCESSOR/CHIPSET SUPPORT
P: Jordan Crouse
-L: info-linux@geode.amd.com (subscribers-only)
+L: linux-geode@lists.infradead.org (moderated for non-subscribers)
W: http://www.amd.com/us-en/ConnectivitySolutions/TechnicalResources/0,,50_2334_2452_11363,00.html
S: Supported
@@ -1196,9 +1196,9 @@
CPUSETS
P: Paul Jackson
-P: Simon Derr
+P: Paul Menage
M: pj@sgi.com
-M: simon.derr@bull.net
+M: menage@google.com
L: linux-kernel@vger.kernel.org
W: http://www.bullopensource.org/cpuset/
S: Supported
@@ -1557,6 +1557,14 @@
L: general@lists.openfabrics.org
S: Supported
+EMBEDDED LINUX
+P: Paul Gortmaker
+M: paul.gortmaker@windriver.com
+P David Woodhouse
+M: dwmw2@infradead.org
+L: linux-embedded@vger.kernel.org
+S: Maintained
+
EMULEX LPFC FC SCSI DRIVER
P: James Smart
M: james.smart@emulex.com
@@ -3120,7 +3128,7 @@
P: Jesse Barnes
M: jbarnes@virtuousgeek.org
L: linux-kernel@vger.kernel.org
-L: linux-pci@atrey.karlin.mff.cuni.cz
+L: linux-pci@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git
S: Supported
@@ -4041,6 +4049,12 @@
S: Maintained
W: http://www.kroah.com/linux-usb/
+USB CYPRESS C67X00 DRIVER
+P: Peter Korsgaard
+M: jacmet@sunsite.dk
+L: linux-usb@vger.kernel.org
+S: Maintained
+
USB DAVICOM DM9601 DRIVER
P: Peter Korsgaard
M: jacmet@sunsite.dk
diff --git a/Makefile b/Makefile
index d3634cd..3140145 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
-SUBLEVEL = 25
-EXTRAVERSION =
+SUBLEVEL = 26
+EXTRAVERSION = -rc2
NAME = Funky Weasel is Jiggy wit it
# *DOCUMENTATION*
@@ -794,7 +794,7 @@
quiet_cmd_vmlinux-modpost = LD $@
cmd_vmlinux-modpost = $(LD) $(LDFLAGS) -r -o $@ \
$(vmlinux-init) --start-group $(vmlinux-main) --end-group \
- $(filter-out $(vmlinux-init) $(vmlinux-main) $(vmlinux-lds) FORCE ,$^)
+ $(filter-out $(vmlinux-init) $(vmlinux-main) FORCE ,$^)
define rule_vmlinux-modpost
:
+$(call cmd,vmlinux-modpost)
@@ -818,7 +818,9 @@
ifdef CONFIG_KALLSYMS
.tmp_vmlinux1: vmlinux.o
endif
-vmlinux.o: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) FORCE
+
+modpost-init := $(filter-out init/built-in.o, $(vmlinux-init))
+vmlinux.o: $(modpost-init) $(vmlinux-main) FORCE
$(call if_changed_rule,vmlinux-modpost)
# The actual objects are generated when descending,
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 9fee37e..32ca1b9 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -981,27 +981,18 @@
osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp,
struct timeval32 __user *tvp)
{
- fd_set_bits fds;
- char *bits;
- size_t size;
- long timeout;
- int ret = -EINVAL;
- struct fdtable *fdt;
- int max_fds;
-
- timeout = MAX_SCHEDULE_TIMEOUT;
+ s64 timeout = MAX_SCHEDULE_TIMEOUT;
if (tvp) {
time_t sec, usec;
if (!access_ok(VERIFY_READ, tvp, sizeof(*tvp))
|| __get_user(sec, &tvp->tv_sec)
|| __get_user(usec, &tvp->tv_usec)) {
- ret = -EFAULT;
- goto out_nofds;
+ return -EFAULT;
}
if (sec < 0 || usec < 0)
- goto out_nofds;
+ return -EINVAL;
if ((unsigned long) sec < MAX_SELECT_SECONDS) {
timeout = (usec + 1000000/HZ - 1) / (1000000/HZ);
@@ -1009,60 +1000,8 @@
}
}
- rcu_read_lock();
- fdt = files_fdtable(current->files);
- max_fds = fdt->max_fds;
- rcu_read_unlock();
- if (n < 0 || n > max_fds)
- goto out_nofds;
-
- /*
- * We need 6 bitmaps (in/out/ex for both incoming and outgoing),
- * since we used fdset we need to allocate memory in units of
- * long-words.
- */
- ret = -ENOMEM;
- size = FDS_BYTES(n);
- bits = kmalloc(6 * size, GFP_KERNEL);
- if (!bits)
- goto out_nofds;
- fds.in = (unsigned long *) bits;
- fds.out = (unsigned long *) (bits + size);
- fds.ex = (unsigned long *) (bits + 2*size);
- fds.res_in = (unsigned long *) (bits + 3*size);
- fds.res_out = (unsigned long *) (bits + 4*size);
- fds.res_ex = (unsigned long *) (bits + 5*size);
-
- if ((ret = get_fd_set(n, inp->fds_bits, fds.in)) ||
- (ret = get_fd_set(n, outp->fds_bits, fds.out)) ||
- (ret = get_fd_set(n, exp->fds_bits, fds.ex)))
- goto out;
- zero_fd_set(n, fds.res_in);
- zero_fd_set(n, fds.res_out);
- zero_fd_set(n, fds.res_ex);
-
- ret = do_select(n, &fds, &timeout);
-
/* OSF does not copy back the remaining time. */
-
- if (ret < 0)
- goto out;
- if (!ret) {
- ret = -ERESTARTNOHAND;
- if (signal_pending(current))
- goto out;
- ret = 0;
- }
-
- if (set_fd_set(n, inp->fds_bits, fds.res_in) ||
- set_fd_set(n, outp->fds_bits, fds.res_out) ||
- set_fd_set(n, exp->fds_bits, fds.res_ex))
- ret = -EFAULT;
-
- out:
- kfree(bits);
- out_nofds:
- return ret;
+ return core_sys_select(n, inp, outp, exp, &timeout);
}
struct rusage32 {
diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index 9bd1870..0128687 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -34,23 +34,6 @@
unsigned long new_len, unsigned long flags,
unsigned long new_addr);
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-asmlinkage int sys_pipe(unsigned long __user *fildes)
-{
- int fd[2];
- int error;
-
- error = do_pipe(fd);
- if (!error) {
- if (copy_to_user(fildes, fd, 2*sizeof(int)))
- error = -EFAULT;
- }
- return error;
-}
-
/* common code for old and new mmaps */
inline long do_mmap2(
unsigned long addr, unsigned long len,
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 8bc1872..1d7bca6 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -280,7 +280,7 @@
const int port = gpio >> 3;
const int port_mask = 1 << (gpio & 7);
- gpio_direction_output(gpio, gpio_get_value(gpio));
+ gpio_direction_input(gpio);
switch (type) {
case IRQT_RISING:
diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c
index 36e5835..ca85d24 100644
--- a/arch/arm/mach-ns9xxx/irq.c
+++ b/arch/arm/mach-ns9xxx/irq.c
@@ -62,7 +62,7 @@
#if 0
#define handle_irq handle_level_irq
#else
-void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
+static void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
{
unsigned int cpu = smp_processor_id();
struct irqaction *action;
@@ -70,27 +70,35 @@
spin_lock(&desc->lock);
- if (unlikely(desc->status & IRQ_INPROGRESS))
- goto out_unlock;
+ BUG_ON(desc->status & IRQ_INPROGRESS);
desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
kstat_cpu(cpu).irqs[irq]++;
action = desc->action;
if (unlikely(!action || (desc->status & IRQ_DISABLED)))
- goto out_unlock;
+ goto out_mask;
desc->status |= IRQ_INPROGRESS;
spin_unlock(&desc->lock);
action_ret = handle_IRQ_event(irq, action);
+ /* XXX: There is no direct way to access noirqdebug, so check
+ * unconditionally for spurious irqs...
+ * Maybe this function should go to kernel/irq/chip.c? */
+ note_interrupt(irq, desc, action_ret);
+
spin_lock(&desc->lock);
desc->status &= ~IRQ_INPROGRESS;
- if (!(desc->status & IRQ_DISABLED) && desc->chip->ack)
- desc->chip->ack(irq);
-out_unlock:
+ if (desc->status & IRQ_DISABLED)
+out_mask:
+ desc->chip->mask(irq);
+
+ /* ack unconditionally to unmask lower prio irqs */
+ desc->chip->ack(irq);
+
spin_unlock(&desc->lock);
}
#define handle_irq handle_prio_irq
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index 9608503..e63fb05 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -34,11 +34,7 @@
* Non-CPU Masters address decoding --
* Unlike the CPU, we setup the access from Orion's master interfaces to DDR
* banks only (the typical use case).
- * Setup access for each master to DDR is issued by common.c.
- *
- * Note: although orion_setbits() and orion_clrbits() are not atomic
- * no locking is necessary here since code in this file is only called
- * at boot time when there is no concurrency issues.
+ * Setup access for each master to DDR is issued by platform device setup.
*/
/*
@@ -48,10 +44,6 @@
#define TARGET_DEV_BUS 1
#define TARGET_PCI 3
#define TARGET_PCIE 4
-#define ATTR_DDR_CS(n) (((n) ==0) ? 0xe : \
- ((n) == 1) ? 0xd : \
- ((n) == 2) ? 0xb : \
- ((n) == 3) ? 0x7 : 0xf)
#define ATTR_PCIE_MEM 0x59
#define ATTR_PCIE_IO 0x51
#define ATTR_PCIE_WA 0x79
@@ -61,17 +53,12 @@
#define ATTR_DEV_CS1 0x1d
#define ATTR_DEV_CS2 0x1b
#define ATTR_DEV_BOOT 0xf
-#define WIN_EN 1
/*
* Helpers to get DDR bank info
*/
-#define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) * 8))
-#define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) * 8))
-#define DDR_MAX_CS 4
-#define DDR_REG_TO_SIZE(reg) (((reg) | 0xffffff) + 1)
-#define DDR_REG_TO_BASE(reg) ((reg) & 0xff000000)
-#define DDR_BANK_EN 1
+#define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) << 3))
+#define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) << 3))
/*
* CPU Address Decode Windows registers
@@ -81,17 +68,6 @@
#define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4))
#define CPU_WIN_REMAP_HI(n) ORION5X_BRIDGE_REG(0x00c | ((n) << 4))
-/*
- * Gigabit Ethernet Address Decode Windows registers
- */
-#define ETH_WIN_BASE(win) ORION5X_ETH_REG(0x200 + ((win) * 8))
-#define ETH_WIN_SIZE(win) ORION5X_ETH_REG(0x204 + ((win) * 8))
-#define ETH_WIN_REMAP(win) ORION5X_ETH_REG(0x280 + ((win) * 4))
-#define ETH_WIN_EN ORION5X_ETH_REG(0x290)
-#define ETH_WIN_PROT ORION5X_ETH_REG(0x294)
-#define ETH_MAX_WIN 6
-#define ETH_MAX_REMAP_WIN 4
-
struct mbus_dram_target_info orion5x_mbus_dram_info;
@@ -202,39 +178,3 @@
{
setup_cpu_win(7, base, size, TARGET_PCIE, ATTR_PCIE_WA, -1);
}
-
-void __init orion5x_setup_eth_wins(void)
-{
- int i;
-
- /*
- * First, disable and clear windows
- */
- for (i = 0; i < ETH_MAX_WIN; i++) {
- orion5x_write(ETH_WIN_BASE(i), 0);
- orion5x_write(ETH_WIN_SIZE(i), 0);
- orion5x_setbits(ETH_WIN_EN, 1 << i);
- orion5x_clrbits(ETH_WIN_PROT, 0x3 << (i * 2));
- if (i < ETH_MAX_REMAP_WIN)
- orion5x_write(ETH_WIN_REMAP(i), 0);
- }
-
- /*
- * Setup windows for DDR banks.
- */
- for (i = 0; i < DDR_MAX_CS; i++) {
- u32 base, size;
- size = orion5x_read(DDR_SIZE_CS(i));
- base = orion5x_read(DDR_BASE_CS(i));
- if (size & DDR_BANK_EN) {
- base = DDR_REG_TO_BASE(base);
- size = DDR_REG_TO_SIZE(size);
- orion5x_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000);
- orion5x_write(ETH_WIN_BASE(i), (base & 0xffff0000) |
- (ATTR_DDR_CS(i) << 8) |
- TARGET_DDR);
- orion5x_clrbits(ETH_WIN_EN, 1 << i);
- orion5x_setbits(ETH_WIN_PROT, 0x3 << (i * 2));
- }
- }
-}
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 0ecff5a..4f13fd0 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -190,6 +190,11 @@
* (The Orion and Discovery (MV643xx) families use the same Ethernet driver)
****************************************************************************/
+struct mv643xx_eth_shared_platform_data orion5x_eth_shared_data = {
+ .dram = &orion5x_mbus_dram_info,
+ .t_clk = ORION5X_TCLK,
+};
+
static struct resource orion5x_eth_shared_resources[] = {
{
.start = ORION5X_ETH_PHYS_BASE + 0x2000,
@@ -201,6 +206,9 @@
static struct platform_device orion5x_eth_shared = {
.name = MV643XX_ETH_SHARED_NAME,
.id = 0,
+ .dev = {
+ .platform_data = &orion5x_eth_shared_data,
+ },
.num_resources = 1,
.resource = orion5x_eth_shared_resources,
};
@@ -362,7 +370,6 @@
* Setup Orion address map
*/
orion5x_setup_cpu_mbus_bridge();
- orion5x_setup_eth_wins();
/*
* Register devices.
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 14adf8d..bd0f05d 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -22,7 +22,6 @@
void orion5x_setup_dev1_win(u32 base, u32 size);
void orion5x_setup_dev2_win(u32 base, u32 size);
void orion5x_setup_pcie_wa_win(u32 base, u32 size);
-void orion5x_setup_eth_wins(void);
/*
* Shared code used internally by other Orion core functions.
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 6a83085..0e6d05b 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -5,6 +5,13 @@
# Common support (must be linked before board specific support)
obj-y += clock.o devices.o generic.o irq.o dma.o \
time.o gpio.o
+obj-$(CONFIG_PM) += pm.o sleep.o standby.o
+obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o
+
+# Generic drivers that other drivers may depend upon
+obj-$(CONFIG_PXA_SSP) += ssp.o
+
+# SoC-specific code
obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa25x.o
obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa27x.o
obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o
@@ -48,11 +55,6 @@
obj-$(CONFIG_LEDS) += $(led-y)
-# Misc features
-obj-$(CONFIG_PM) += pm.o sleep.o standby.o
-obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o
-obj-$(CONFIG_PXA_SSP) += ssp.o
-
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
endif
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 259ca82..b757dd7 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -493,8 +493,6 @@
static void corgi_poweroff(void)
{
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
if (!machine_is_corgi())
/* Green LED off tells the bootloader to halt */
reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
@@ -503,8 +501,6 @@
static void corgi_restart(char mode)
{
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
if (!machine_is_corgi())
/* Green LED on tells the bootloader to reboot */
set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c
index 4b21479..fb9ba1a 100644
--- a/arch/arm/mach-pxa/cpu-pxa.c
+++ b/arch/arm/mach-pxa/cpu-pxa.c
@@ -49,125 +49,216 @@
#define freq_debug 0
#endif
+static unsigned int pxa27x_maxfreq;
+module_param(pxa27x_maxfreq, uint, 0);
+MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
+ "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)");
+
typedef struct {
unsigned int khz;
unsigned int membus;
unsigned int cccr;
unsigned int div2;
+ unsigned int cclkcfg;
} pxa_freqs_t;
/* Define the refresh period in mSec for the SDRAM and the number of rows */
-#define SDRAM_TREF 64 /* standard 64ms SDRAM */
-#define SDRAM_ROWS 4096 /* 64MB=8192 32MB=4096 */
-#define MDREFR_DRI(x) (((x) * SDRAM_TREF) / (SDRAM_ROWS * 32))
+#define SDRAM_TREF 64 /* standard 64ms SDRAM */
+#define SDRAM_ROWS 4096 /* 64MB=8192 32MB=4096 */
-#define CCLKCFG_TURBO 0x1
-#define CCLKCFG_FCS 0x2
-#define PXA25x_MIN_FREQ 99500
-#define PXA25x_MAX_FREQ 398100
-#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2)
-#define MDREFR_DRI_MASK 0xFFF
+#define CCLKCFG_TURBO 0x1
+#define CCLKCFG_FCS 0x2
+#define CCLKCFG_HALFTURBO 0x4
+#define CCLKCFG_FASTBUS 0x8
+#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2)
+#define MDREFR_DRI_MASK 0xFFF
-
+/*
+ * PXA255 definitions
+ */
/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */
+#define CCLKCFG CCLKCFG_TURBO | CCLKCFG_FCS
+
static pxa_freqs_t pxa255_run_freqs[] =
{
- /* CPU MEMBUS CCCR DIV2*/
- { 99500, 99500, 0x121, 1}, /* run= 99, turbo= 99, PXbus=50, SDRAM=50 */
- {132700, 132700, 0x123, 1}, /* run=133, turbo=133, PXbus=66, SDRAM=66 */
- {199100, 99500, 0x141, 0}, /* run=199, turbo=199, PXbus=99, SDRAM=99 */
- {265400, 132700, 0x143, 1}, /* run=265, turbo=265, PXbus=133, SDRAM=66 */
- {331800, 165900, 0x145, 1}, /* run=331, turbo=331, PXbus=166, SDRAM=83 */
- {398100, 99500, 0x161, 0}, /* run=398, turbo=398, PXbus=196, SDRAM=99 */
- {0,}
+ /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */
+ { 99500, 99500, 0x121, 1, CCLKCFG}, /* 99, 99, 50, 50 */
+ {132700, 132700, 0x123, 1, CCLKCFG}, /* 133, 133, 66, 66 */
+ {199100, 99500, 0x141, 0, CCLKCFG}, /* 199, 199, 99, 99 */
+ {265400, 132700, 0x143, 1, CCLKCFG}, /* 265, 265, 133, 66 */
+ {331800, 165900, 0x145, 1, CCLKCFG}, /* 331, 331, 166, 83 */
+ {398100, 99500, 0x161, 0, CCLKCFG}, /* 398, 398, 196, 99 */
};
-#define NUM_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
-
-static struct cpufreq_frequency_table pxa255_run_freq_table[NUM_RUN_FREQS+1];
/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
static pxa_freqs_t pxa255_turbo_freqs[] =
{
- /* CPU MEMBUS CCCR DIV2*/
- { 99500, 99500, 0x121, 1}, /* run=99, turbo= 99, PXbus=50, SDRAM=50 */
- {199100, 99500, 0x221, 0}, /* run=99, turbo=199, PXbus=50, SDRAM=99 */
- {298500, 99500, 0x321, 0}, /* run=99, turbo=287, PXbus=50, SDRAM=99 */
- {298600, 99500, 0x1c1, 0}, /* run=199, turbo=287, PXbus=99, SDRAM=99 */
- {398100, 99500, 0x241, 0}, /* run=199, turbo=398, PXbus=99, SDRAM=99 */
- {0,}
+ /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */
+ { 99500, 99500, 0x121, 1, CCLKCFG}, /* 99, 99, 50, 50 */
+ {199100, 99500, 0x221, 0, CCLKCFG}, /* 99, 199, 50, 99 */
+ {298500, 99500, 0x321, 0, CCLKCFG}, /* 99, 287, 50, 99 */
+ {298600, 99500, 0x1c1, 0, CCLKCFG}, /* 199, 287, 99, 99 */
+ {398100, 99500, 0x241, 0, CCLKCFG}, /* 199, 398, 99, 99 */
};
-#define NUM_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
-static struct cpufreq_frequency_table pxa255_turbo_freq_table[NUM_TURBO_FREQS+1];
+#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
+#define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
+
+static struct cpufreq_frequency_table
+ pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1];
+static struct cpufreq_frequency_table
+ pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1];
+
+/*
+ * PXA270 definitions
+ *
+ * For the PXA27x:
+ * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG.
+ *
+ * A = 0 => memory controller clock from table 3-7,
+ * A = 1 => memory controller clock = system bus clock
+ * Run mode frequency = 13 MHz * L
+ * Turbo mode frequency = 13 MHz * L * N
+ * System bus frequency = 13 MHz * L / (B + 1)
+ *
+ * In CCCR:
+ * A = 1
+ * L = 16 oscillator to run mode ratio
+ * 2N = 6 2 * (turbo mode to run mode ratio)
+ *
+ * In CCLKCFG:
+ * B = 1 Fast bus mode
+ * HT = 0 Half-Turbo mode
+ * T = 1 Turbo mode
+ *
+ * For now, just support some of the combinations in table 3-7 of
+ * PXA27x Processor Family Developer's Manual to simplify frequency
+ * change sequences.
+ */
+#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L)
+#define CCLKCFG2(B, HT, T) \
+ (CCLKCFG_FCS | \
+ ((B) ? CCLKCFG_FASTBUS : 0) | \
+ ((HT) ? CCLKCFG_HALFTURBO : 0) | \
+ ((T) ? CCLKCFG_TURBO : 0))
+
+static pxa_freqs_t pxa27x_freqs[] = {
+ {104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1)},
+ {156000, 104000, PXA27x_CCCR(1, 8, 6), 0, CCLKCFG2(1, 1, 1)},
+ {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1)},
+ {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1)},
+ {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1)},
+ {520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1)},
+ {624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1)}
+};
+
+#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
+static struct cpufreq_frequency_table
+ pxa27x_freq_table[NUM_PXA27x_FREQS+1];
extern unsigned get_clk_frequency_khz(int info);
+static void find_freq_tables(struct cpufreq_policy *policy,
+ struct cpufreq_frequency_table **freq_table,
+ pxa_freqs_t **pxa_freqs)
+{
+ if (cpu_is_pxa25x()) {
+ if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
+ *pxa_freqs = pxa255_run_freqs;
+ *freq_table = pxa255_run_freq_table;
+ } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
+ *pxa_freqs = pxa255_turbo_freqs;
+ *freq_table = pxa255_turbo_freq_table;
+ } else {
+ printk("CPU PXA: Unknown policy found. "
+ "Using CPUFREQ_POLICY_PERFORMANCE\n");
+ *pxa_freqs = pxa255_run_freqs;
+ *freq_table = pxa255_run_freq_table;
+ }
+ }
+ if (cpu_is_pxa27x()) {
+ *pxa_freqs = pxa27x_freqs;
+ *freq_table = pxa27x_freq_table;
+ }
+}
+
+static void pxa27x_guess_max_freq(void)
+{
+ if (!pxa27x_maxfreq) {
+ pxa27x_maxfreq = 416000;
+ printk(KERN_INFO "PXA CPU 27x max frequency not defined "
+ "(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
+ pxa27x_maxfreq);
+ } else {
+ pxa27x_maxfreq *= 1000;
+ }
+}
+
+static u32 mdrefr_dri(unsigned int freq)
+{
+ u32 dri = 0;
+
+ if (cpu_is_pxa25x())
+ dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS * 32));
+ if (cpu_is_pxa27x())
+ dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS - 31)) / 32;
+ return dri;
+}
+
/* find a valid frequency point */
static int pxa_verify_policy(struct cpufreq_policy *policy)
{
struct cpufreq_frequency_table *pxa_freqs_table;
+ pxa_freqs_t *pxa_freqs;
int ret;
- if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
- pxa_freqs_table = pxa255_run_freq_table;
- } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
- pxa_freqs_table = pxa255_turbo_freq_table;
- } else {
- printk("CPU PXA: Unknown policy found. "
- "Using CPUFREQ_POLICY_PERFORMANCE\n");
- pxa_freqs_table = pxa255_run_freq_table;
- }
-
+ find_freq_tables(policy, &pxa_freqs_table, &pxa_freqs);
ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table);
if (freq_debug)
pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n",
- policy->min, policy->max);
+ policy->min, policy->max);
return ret;
}
+static unsigned int pxa_cpufreq_get(unsigned int cpu)
+{
+ return get_clk_frequency_khz(0);
+}
+
static int pxa_set_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
+ unsigned int target_freq,
+ unsigned int relation)
{
struct cpufreq_frequency_table *pxa_freqs_table;
pxa_freqs_t *pxa_freq_settings;
struct cpufreq_freqs freqs;
unsigned int idx;
unsigned long flags;
- unsigned int unused, preset_mdrefr, postset_mdrefr;
- void *ramstart = phys_to_virt(0xa0000000);
+ unsigned int new_freq_cpu, new_freq_mem;
+ unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
/* Get the current policy */
- if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
- pxa_freq_settings = pxa255_run_freqs;
- pxa_freqs_table = pxa255_run_freq_table;
- } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
- pxa_freq_settings = pxa255_turbo_freqs;
- pxa_freqs_table = pxa255_turbo_freq_table;
- } else {
- printk("CPU PXA: Unknown policy found. "
- "Using CPUFREQ_POLICY_PERFORMANCE\n");
- pxa_freq_settings = pxa255_run_freqs;
- pxa_freqs_table = pxa255_run_freq_table;
- }
+ find_freq_tables(policy, &pxa_freqs_table, &pxa_freq_settings);
/* Lookup the next frequency */
if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
- target_freq, relation, &idx)) {
+ target_freq, relation, &idx)) {
return -EINVAL;
}
+ new_freq_cpu = pxa_freq_settings[idx].khz;
+ new_freq_mem = pxa_freq_settings[idx].membus;
freqs.old = policy->cur;
- freqs.new = pxa_freq_settings[idx].khz;
+ freqs.new = new_freq_cpu;
freqs.cpu = policy->cpu;
if (freq_debug)
- pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
- freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
- (pxa_freq_settings[idx].membus / 2000) :
- (pxa_freq_settings[idx].membus / 1000));
+ pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, "
+ "(SDRAM %d Mhz)\n",
+ freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
+ (new_freq_mem / 2000) : (new_freq_mem / 1000));
/*
* Tell everyone what we're about to do...
@@ -177,16 +268,16 @@
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
/* Calculate the next MDREFR. If we're slowing down the SDRAM clock
- * we need to preset the smaller DRI before the change. If we're speeding
- * up we need to set the larger DRI value after the change.
+ * we need to preset the smaller DRI before the change. If we're
+ * speeding up we need to set the larger DRI value after the change.
*/
preset_mdrefr = postset_mdrefr = MDREFR;
- if ((MDREFR & MDREFR_DRI_MASK) > MDREFR_DRI(pxa_freq_settings[idx].membus)) {
- preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK) |
- MDREFR_DRI(pxa_freq_settings[idx].membus);
+ if ((MDREFR & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
+ preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
+ preset_mdrefr |= mdrefr_dri(new_freq_mem);
}
- postset_mdrefr = (postset_mdrefr & ~MDREFR_DRI_MASK) |
- MDREFR_DRI(pxa_freq_settings[idx].membus);
+ postset_mdrefr =
+ (postset_mdrefr & ~MDREFR_DRI_MASK) | mdrefr_dri(new_freq_mem);
/* If we're dividing the memory clock by two for the SDRAM clock, this
* must be set prior to the change. Clearing the divide must be done
@@ -201,26 +292,27 @@
local_irq_save(flags);
- /* Set new the CCCR */
+ /* Set new the CCCR and prepare CCLKCFG */
CCCR = pxa_freq_settings[idx].cccr;
+ cclkcfg = pxa_freq_settings[idx].cclkcfg;
asm volatile(" \n\
ldr r4, [%1] /* load MDREFR */ \n\
b 2f \n\
- .align 5 \n\
+ .align 5 \n\
1: \n\
- str %4, [%1] /* preset the MDREFR */ \n\
+ str %3, [%1] /* preset the MDREFR */ \n\
mcr p14, 0, %2, c6, c0, 0 /* set CCLKCFG[FCS] */ \n\
- str %5, [%1] /* postset the MDREFR */ \n\
+ str %4, [%1] /* postset the MDREFR */ \n\
\n\
b 3f \n\
2: b 1b \n\
3: nop \n\
"
- : "=&r" (unused)
- : "r" (&MDREFR), "r" (CCLKCFG_TURBO|CCLKCFG_FCS), "r" (ramstart),
- "r" (preset_mdrefr), "r" (postset_mdrefr)
- : "r4", "r5");
+ : "=&r" (unused)
+ : "r" (&MDREFR), "r" (cclkcfg),
+ "r" (preset_mdrefr), "r" (postset_mdrefr)
+ : "r4", "r5");
local_irq_restore(flags);
/*
@@ -233,38 +325,57 @@
return 0;
}
-static unsigned int pxa_cpufreq_get(unsigned int cpu)
-{
- return get_clk_frequency_khz(0);
-}
-
-static int pxa_cpufreq_init(struct cpufreq_policy *policy)
+static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
{
int i;
+ unsigned int freq;
+
+ /* try to guess pxa27x cpu */
+ if (cpu_is_pxa27x())
+ pxa27x_guess_max_freq();
/* set default policy and cpuinfo */
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
- policy->policy = CPUFREQ_POLICY_PERFORMANCE;
- policy->cpuinfo.max_freq = PXA25x_MAX_FREQ;
- policy->cpuinfo.min_freq = PXA25x_MIN_FREQ;
+ if (cpu_is_pxa25x())
+ policy->policy = CPUFREQ_POLICY_PERFORMANCE;
policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
- policy->cur = get_clk_frequency_khz(0); /* current freq */
+ policy->cur = get_clk_frequency_khz(0); /* current freq */
policy->min = policy->max = policy->cur;
- /* Generate the run cpufreq_frequency_table struct */
- for (i = 0; i < NUM_RUN_FREQS; i++) {
+ /* Generate pxa25x the run cpufreq_frequency_table struct */
+ for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) {
pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
pxa255_run_freq_table[i].index = i;
}
-
pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
- /* Generate the turbo cpufreq_frequency_table struct */
- for (i = 0; i < NUM_TURBO_FREQS; i++) {
- pxa255_turbo_freq_table[i].frequency = pxa255_turbo_freqs[i].khz;
+
+ /* Generate pxa25x the turbo cpufreq_frequency_table struct */
+ for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) {
+ pxa255_turbo_freq_table[i].frequency =
+ pxa255_turbo_freqs[i].khz;
pxa255_turbo_freq_table[i].index = i;
}
pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
+ /* Generate the pxa27x cpufreq_frequency_table struct */
+ for (i = 0; i < NUM_PXA27x_FREQS; i++) {
+ freq = pxa27x_freqs[i].khz;
+ if (freq > pxa27x_maxfreq)
+ break;
+ pxa27x_freq_table[i].frequency = freq;
+ pxa27x_freq_table[i].index = i;
+ }
+ pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+ /*
+ * Set the policy's minimum and maximum frequencies from the tables
+ * just constructed. This sets cpuinfo.mxx_freq, min and max.
+ */
+ if (cpu_is_pxa25x())
+ cpufreq_frequency_table_cpuinfo(policy, pxa255_run_freq_table);
+ else if (cpu_is_pxa27x())
+ cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table);
+
printk(KERN_INFO "PXA CPU frequency change support initialized\n");
return 0;
@@ -275,26 +386,25 @@
.target = pxa_set_target,
.init = pxa_cpufreq_init,
.get = pxa_cpufreq_get,
- .name = "PXA25x",
+ .name = "PXA2xx",
};
static int __init pxa_cpu_init(void)
{
int ret = -ENODEV;
- if (cpu_is_pxa25x())
+ if (cpu_is_pxa25x() || cpu_is_pxa27x())
ret = cpufreq_register_driver(&pxa_cpufreq_driver);
return ret;
}
static void __exit pxa_cpu_exit(void)
{
- if (cpu_is_pxa25x())
- cpufreq_unregister_driver(&pxa_cpufreq_driver);
+ cpufreq_unregister_driver(&pxa_cpufreq_driver);
}
-MODULE_AUTHOR ("Intrinsyc Software Inc.");
-MODULE_DESCRIPTION ("CPU frequency changing driver for the PXA architecture");
+MODULE_AUTHOR("Intrinsyc Software Inc.");
+MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture");
MODULE_LICENSE("GPL");
module_init(pxa_cpu_init);
module_exit(pxa_cpu_exit);
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 0993f4d..7b9bdd0 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -396,7 +396,7 @@
.cmap_inverse = 0,
.cmap_static = 0,
.lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
- LCD_AC_BIAS_FREQ(255);
+ LCD_AC_BIAS_FREQ(255),
};
#define MMC_POLL_RATE msecs_to_jiffies(1000)
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index ec1bbf3..7d4debb 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -42,20 +42,17 @@
if (state != PM_SUSPEND_STANDBY) {
pxa_cpu_pm_fns->save(sleep_save);
/* before sleeping, calculate and save a checksum */
- for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
+ for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
sleep_save_checksum += sleep_save[i];
}
- /* Clear reset status */
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
/* *** go zzz *** */
pxa_cpu_pm_fns->enter(state);
cpu_init();
if (state != PM_SUSPEND_STANDBY) {
/* after sleeping, validate the checksum */
- for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
+ for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
checksum += sleep_save[i];
/* if invalid, display message and wait for a hardware reset */
@@ -101,7 +98,8 @@
return -EINVAL;
}
- sleep_save = kmalloc(pxa_cpu_pm_fns->save_size, GFP_KERNEL);
+ sleep_save = kmalloc(pxa_cpu_pm_fns->save_count * sizeof(unsigned long),
+ GFP_KERNEL);
if (!sleep_save) {
printk(KERN_ERR "failed to alloc memory for pm save\n");
return -ENOMEM;
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index ca5ac19..0b30f25 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -326,13 +326,11 @@
static void poodle_poweroff(void)
{
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
arm_machine_restart('h');
}
static void poodle_restart(char mode)
{
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
arm_machine_restart('h');
}
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index d9b5450..e5b417d 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -150,9 +150,7 @@
* More ones like CP and general purpose register values are preserved
* with the stack pointer in sleep.S.
*/
-enum { SLEEP_SAVE_START = 0,
-
- SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2,
+enum { SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2,
SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
@@ -162,7 +160,7 @@
SLEEP_SAVE_CKEN,
- SLEEP_SAVE_SIZE
+ SLEEP_SAVE_COUNT
};
@@ -200,6 +198,9 @@
static void pxa25x_cpu_pm_enter(suspend_state_t state)
{
+ /* Clear reset status */
+ RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
switch (state) {
case PM_SUSPEND_MEM:
/* set resume return address */
@@ -210,7 +211,7 @@
}
static struct pxa_cpu_pm_fns pxa25x_cpu_pm_fns = {
- .save_size = SLEEP_SAVE_SIZE,
+ .save_count = SLEEP_SAVE_COUNT,
.valid = suspend_valid_only_mem,
.save = pxa25x_cpu_pm_save,
.restore = pxa25x_cpu_pm_restore,
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 7a2449d..7e94583 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -181,9 +181,7 @@
* More ones like CP and general purpose register values are preserved
* with the stack pointer in sleep.S.
*/
-enum { SLEEP_SAVE_START = 0,
-
- SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
+enum { SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
@@ -198,7 +196,7 @@
SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER,
SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR,
- SLEEP_SAVE_SIZE
+ SLEEP_SAVE_COUNT
};
void pxa27x_cpu_pm_save(unsigned long *sleep_save)
@@ -251,6 +249,9 @@
/* Clear edge-detect status register. */
PEDR = 0xDF12FE1B;
+ /* Clear reset status */
+ RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
switch (state) {
case PM_SUSPEND_STANDBY:
pxa_cpu_standby();
@@ -269,7 +270,7 @@
}
static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = {
- .save_size = SLEEP_SAVE_SIZE,
+ .save_count = SLEEP_SAVE_COUNT,
.save = pxa27x_cpu_pm_save,
.restore = pxa27x_cpu_pm_restore,
.valid = pxa27x_cpu_pm_valid,
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index b6a6f5f..644550b 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -256,12 +256,11 @@
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
-enum { SLEEP_SAVE_START = 0,
- SLEEP_SAVE_CKENA,
+enum { SLEEP_SAVE_CKENA,
SLEEP_SAVE_CKENB,
SLEEP_SAVE_ACCR,
- SLEEP_SAVE_SIZE,
+ SLEEP_SAVE_COUNT,
};
static void pxa3xx_cpu_pm_save(unsigned long *sleep_save)
@@ -376,7 +375,7 @@
}
static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
- .save_size = SLEEP_SAVE_SIZE,
+ .save_count = SLEEP_SAVE_COUNT,
.save = pxa3xx_cpu_pm_save,
.restore = pxa3xx_cpu_pm_restore,
.valid = pxa3xx_cpu_pm_valid,
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 62a02c3..e7d0fcd 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -529,8 +529,6 @@
static void spitz_poweroff(void)
{
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
pxa_gpio_mode(SPITZ_GPIO_ON_RESET | GPIO_OUT);
GPSR(SPITZ_GPIO_ON_RESET) = GPIO_bit(SPITZ_GPIO_ON_RESET);
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 7a7f5f9..23f050f 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -119,9 +119,6 @@
/* nRESET_OUT Disable */
PSLR |= PSLR_SL_ROD;
- /* Clear reset status */
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
PCFR = PCFR_GPR_EN | PCFR_OPDE;
}
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 6458f6d..c2cbd66 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -467,8 +467,6 @@
static void tosa_poweroff(void)
{
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT);
GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET);
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 246c573..1693d44 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -43,20 +43,18 @@
* More ones like CP and general purpose register values are preserved
* on the stack and then the stack pointer is stored last in sleep.S.
*/
-enum { SLEEP_SAVE_SP = 0,
-
- SLEEP_SAVE_GPDR, SLEEP_SAVE_GAFR,
+enum { SLEEP_SAVE_GPDR, SLEEP_SAVE_GAFR,
SLEEP_SAVE_PPDR, SLEEP_SAVE_PPSR, SLEEP_SAVE_PPAR, SLEEP_SAVE_PSDR,
SLEEP_SAVE_Ser1SDCR0,
- SLEEP_SAVE_SIZE
+ SLEEP_SAVE_COUNT
};
static int sa11x0_pm_enter(suspend_state_t state)
{
- unsigned long gpio, sleep_save[SLEEP_SAVE_SIZE];
+ unsigned long gpio, sleep_save[SLEEP_SAVE_COUNT];
gpio = GPLR;
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index d84167f..3ac8d8d 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -411,7 +411,7 @@
clk->parent = parent;
- if (clk == &s3c24xx_dclk0)
+ if (clk == &s3c24xx_clkout0)
mask = S3C2410_MISCCR_CLK0_MASK;
else {
source <<= 4;
@@ -437,7 +437,7 @@
struct clk s3c24xx_dclk1 = {
.name = "dclk1",
.id = -1,
- .ctrlbit = S3C2410_DCLKCON_DCLK0EN,
+ .ctrlbit = S3C2410_DCLKCON_DCLK1EN,
.enable = s3c24xx_dclk_enable,
.set_parent = s3c24xx_dclk_setparent,
.set_rate = s3c24xx_set_dclk_rate,
diff --git a/arch/avr32/kernel/sys_avr32.c b/arch/avr32/kernel/sys_avr32.c
index 8deb600..8e8911e 100644
--- a/arch/avr32/kernel/sys_avr32.c
+++ b/arch/avr32/kernel/sys_avr32.c
@@ -14,19 +14,6 @@
#include <asm/mman.h>
#include <asm/uaccess.h>
-asmlinkage int sys_pipe(unsigned long __user *filedes)
-{
- int fd[2];
- int error;
-
- error = do_pipe(fd);
- if (!error) {
- if (copy_to_user(filedes, fd, sizeof(fd)))
- error = -EFAULT;
- }
- return error;
-}
-
asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
unsigned long prot, unsigned long flags,
unsigned long fd, off_t offset)
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 795d0ac..fd57085 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -832,6 +832,7 @@
config BANK_1
hex "Bank 1"
default 0x7BB0
+ default 0x5558 if BF54x
config BANK_2
hex "Bank 2"
@@ -963,21 +964,22 @@
endmenu
-if (BF537 || BF533 || BF54x)
-
menu "CPU Frequency scaling"
source "drivers/cpufreq/Kconfig"
-config CPU_FREQ
- bool
+config CPU_VOLTAGE
+ bool "CPU Voltage scaling"
+ depends on EXPERIMENTAL
+ depends on CPU_FREQ
default n
help
- If you want to enable this option, you should select the
- DPMC driver from Character Devices.
-endmenu
+ Say Y here if you want CPU voltage scaling according to the CPU frequency.
+ This option violates the PLL BYPASS recommendation in the Blackfin Processor
+ manuals. There is a theoretical risk that during VDDINT transitions
+ the PLL may unlock.
-endif
+endmenu
source "net/Kconfig"
diff --git a/arch/blackfin/kernel/asm-offsets.c b/arch/blackfin/kernel/asm-offsets.c
index 721f15f..881afe9 100644
--- a/arch/blackfin/kernel/asm-offsets.c
+++ b/arch/blackfin/kernel/asm-offsets.c
@@ -56,9 +56,6 @@
/* offsets into the thread struct */
DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
DEFINE(THREAD_USP, offsetof(struct thread_struct, usp));
- DEFINE(THREAD_SR, offsetof(struct thread_struct, seqstat));
- DEFINE(PT_SR, offsetof(struct thread_struct, seqstat));
- DEFINE(THREAD_ESP0, offsetof(struct thread_struct, esp0));
DEFINE(THREAD_PC, offsetof(struct thread_struct, pc));
DEFINE(KERNEL_STACK_SIZE, THREAD_SIZE);
diff --git a/arch/blackfin/kernel/fixed_code.S b/arch/blackfin/kernel/fixed_code.S
index 5ed47228..4b03ba0 100644
--- a/arch/blackfin/kernel/fixed_code.S
+++ b/arch/blackfin/kernel/fixed_code.S
@@ -1,6 +1,6 @@
/*
* This file contains sequences of code that will be copied to a
- * fixed location, defined in <asm/atomic_seq.h>. The interrupt
+ * fixed location, defined in <asm/fixed_code.h>. The interrupt
* handlers ensure that these sequences appear to be atomic when
* executed from userspace.
* These are aligned to 16 bytes, so that we have some space to replace
diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
index 8b9fe29..14a4284 100644
--- a/arch/blackfin/kernel/module.c
+++ b/arch/blackfin/kernel/module.c
@@ -160,6 +160,13 @@
module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
char *secstrings, struct module *mod)
{
+ /*
+ * XXX: sechdrs are vmalloced in kernel/module.c
+ * and would be vfreed just after module is loaded,
+ * so we hack to keep the only information we needed
+ * in mod->arch to correctly free L1 I/D sram later.
+ * NOTE: this breaks the semantic of mod->arch structure.
+ */
Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
void *dest = NULL;
@@ -167,8 +174,8 @@
if ((strcmp(".l1.text", secstrings + s->sh_name) == 0) ||
((strcmp(".text", secstrings + s->sh_name) == 0) &&
(hdr->e_flags & FLG_CODE_IN_L1) && (s->sh_size > 0))) {
- mod->arch.text_l1 = s;
dest = l1_inst_sram_alloc(s->sh_size);
+ mod->arch.text_l1 = dest;
if (dest == NULL) {
printk(KERN_ERR
"module %s: L1 instruction memory allocation failed\n",
@@ -182,8 +189,8 @@
if ((strcmp(".l1.data", secstrings + s->sh_name) == 0) ||
((strcmp(".data", secstrings + s->sh_name) == 0) &&
(hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
- mod->arch.data_a_l1 = s;
dest = l1_data_sram_alloc(s->sh_size);
+ mod->arch.data_a_l1 = dest;
if (dest == NULL) {
printk(KERN_ERR
"module %s: L1 data memory allocation failed\n",
@@ -197,8 +204,8 @@
if (strcmp(".l1.bss", secstrings + s->sh_name) == 0 ||
((strcmp(".bss", secstrings + s->sh_name) == 0) &&
(hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
- mod->arch.bss_a_l1 = s;
dest = l1_data_sram_alloc(s->sh_size);
+ mod->arch.bss_a_l1 = dest;
if (dest == NULL) {
printk(KERN_ERR
"module %s: L1 data memory allocation failed\n",
@@ -210,8 +217,8 @@
s->sh_addr = (unsigned long)dest;
}
if (strcmp(".l1.data.B", secstrings + s->sh_name) == 0) {
- mod->arch.data_b_l1 = s;
dest = l1_data_B_sram_alloc(s->sh_size);
+ mod->arch.data_b_l1 = dest;
if (dest == NULL) {
printk(KERN_ERR
"module %s: L1 data memory allocation failed\n",
@@ -223,8 +230,8 @@
s->sh_addr = (unsigned long)dest;
}
if (strcmp(".l1.bss.B", secstrings + s->sh_name) == 0) {
- mod->arch.bss_b_l1 = s;
dest = l1_data_B_sram_alloc(s->sh_size);
+ mod->arch.bss_b_l1 = dest;
if (dest == NULL) {
printk(KERN_ERR
"module %s: L1 data memory allocation failed\n",
@@ -416,14 +423,14 @@
void module_arch_cleanup(struct module *mod)
{
- if ((mod->arch.text_l1) && (mod->arch.text_l1->sh_addr))
- l1_inst_sram_free((void *)mod->arch.text_l1->sh_addr);
- if ((mod->arch.data_a_l1) && (mod->arch.data_a_l1->sh_addr))
- l1_data_sram_free((void *)mod->arch.data_a_l1->sh_addr);
- if ((mod->arch.bss_a_l1) && (mod->arch.bss_a_l1->sh_addr))
- l1_data_sram_free((void *)mod->arch.bss_a_l1->sh_addr);
- if ((mod->arch.data_b_l1) && (mod->arch.data_b_l1->sh_addr))
- l1_data_B_sram_free((void *)mod->arch.data_b_l1->sh_addr);
- if ((mod->arch.bss_b_l1) && (mod->arch.bss_b_l1->sh_addr))
- l1_data_B_sram_free((void *)mod->arch.bss_b_l1->sh_addr);
+ if (mod->arch.text_l1)
+ l1_inst_sram_free((void *)mod->arch.text_l1);
+ if (mod->arch.data_a_l1)
+ l1_data_sram_free((void *)mod->arch.data_a_l1);
+ if (mod->arch.bss_a_l1)
+ l1_data_sram_free((void *)mod->arch.bss_a_l1);
+ if (mod->arch.data_b_l1)
+ l1_data_B_sram_free((void *)mod->arch.data_b_l1);
+ if (mod->arch.bss_b_l1)
+ l1_data_B_sram_free((void *)mod->arch.bss_b_l1);
}
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index be9fdd0..53c2cd25 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -245,7 +245,7 @@
void finish_atomic_sections (struct pt_regs *regs)
{
- int __user *up0 = (int __user *)®s->p0;
+ int __user *up0 = (int __user *)regs->p0;
if (regs->pc < ATOMIC_SEQS_START || regs->pc >= ATOMIC_SEQS_END)
return;
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index b4f062c..f51ab08 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -185,8 +185,8 @@
{
unsigned long tmp;
/* make sure the single step bit is not set. */
- tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
- put_reg(child, PT_SR, tmp);
+ tmp = get_reg(child, PT_SYSCFG) & ~TRACE_BITS;
+ put_reg(child, PT_SYSCFG, tmp);
}
long arch_ptrace(struct task_struct *child, long request, long addr, long data)
diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c
index cb9d883..dbc3bbf 100644
--- a/arch/blackfin/kernel/signal.c
+++ b/arch/blackfin/kernel/signal.c
@@ -42,6 +42,9 @@
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+/* Location of the trace bit in SYSCFG. */
+#define TRACE_BITS 0x0001
+
struct fdpic_func_descriptor {
unsigned long text;
unsigned long GOT;
@@ -225,6 +228,16 @@
regs->r1 = (unsigned long)(&frame->info);
regs->r2 = (unsigned long)(&frame->uc);
+ /*
+ * Clear the trace flag when entering the signal handler, but
+ * notify any tracer that was single-stepping it. The tracer
+ * may want to single-step inside the handler too.
+ */
+ if (regs->syscfg & TRACE_BITS) {
+ regs->syscfg &= ~TRACE_BITS;
+ ptrace_notify(SIGTRAP);
+ }
+
return 0;
give_sigsegv:
diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c
index efb7b25..fce49d7 100644
--- a/arch/blackfin/kernel/sys_bfin.c
+++ b/arch/blackfin/kernel/sys_bfin.c
@@ -45,23 +45,6 @@
#include <asm/cacheflush.h>
#include <asm/dma.h>
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-asmlinkage int sys_pipe(unsigned long __user *fildes)
-{
- int fd[2];
- int error;
-
- error = do_pipe(fd);
- if (!error) {
- if (copy_to_user(fildes, fd, 2 * sizeof(int)))
- error = -EFAULT;
- }
- return error;
-}
-
/* common code for old and new mmaps */
static inline long
do_mmap2(unsigned long addr, unsigned long len,
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index 4482c47..e887efc 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -60,7 +60,7 @@
static cycle_t read_cycles(void)
{
- return get_cycles();
+ return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod);
}
unsigned long long sched_clock(void)
@@ -117,7 +117,7 @@
break;
}
case CLOCK_EVT_MODE_ONESHOT:
- bfin_write_TSCALE(0);
+ bfin_write_TSCALE(TIME_SCALE - 1);
bfin_write_TCOUNT(0);
bfin_write_TCNTL(TMPWR | TMREN);
CSYNC();
@@ -183,10 +183,14 @@
static int __init bfin_clockevent_init(void)
{
+ unsigned long timer_clk;
+
+ timer_clk = get_cclk() / TIME_SCALE;
+
setup_irq(IRQ_CORETMR, &bfin_timer_irq);
bfin_timer_init();
- clockevent_bfin.mult = div_sc(get_cclk(), NSEC_PER_SEC, clockevent_bfin.shift);
+ clockevent_bfin.mult = div_sc(timer_clk, NSEC_PER_SEC, clockevent_bfin.shift);
clockevent_bfin.max_delta_ns = clockevent_delta2ns(-1, &clockevent_bfin);
clockevent_bfin.min_delta_ns = clockevent_delta2ns(100, &clockevent_bfin);
clockevents_register_device(&clockevent_bfin);
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 583d538..8aa49f8 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -32,12 +32,14 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
#include <linux/ata_platform.h>
+#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/usb/sl811.h>
@@ -50,6 +52,7 @@
#include <asm/reboot.h>
#include <asm/nand.h>
#include <asm/portmux.h>
+#include <asm/dpmc.h>
#include <linux/spi/ad7877.h>
/*
@@ -171,6 +174,46 @@
};
#endif
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition ezkit_partitions[] = {
+ {
+ .name = "Bootloader",
+ .size = 0x40000,
+ .offset = 0,
+ }, {
+ .name = "Kernel",
+ .size = 0x1C0000,
+ .offset = MTDPART_OFS_APPEND,
+ }, {
+ .name = "RootFS",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ }
+};
+
+static struct physmap_flash_data ezkit_flash_data = {
+ .width = 2,
+ .parts = ezkit_partitions,
+ .nr_parts = ARRAY_SIZE(ezkit_partitions),
+};
+
+static struct resource ezkit_flash_resource = {
+ .start = 0x20000000,
+ .end = 0x203fffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &ezkit_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &ezkit_flash_resource,
+};
+#endif
+
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
static struct mtd_partition partition_info[] = {
{
@@ -420,11 +463,7 @@
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "kernel",
- .size = 0xe0000,
- .offset = MTDPART_OFS_APPEND,
- }, {
- .name = "file system",
+ .name = "linux kernel",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
@@ -434,7 +473,7 @@
.name = "m25p80",
.parts = bfin_spi_flash_partitions,
.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
- .type = "m25p64",
+ .type = "m25p16",
};
/* SPI flash chip (m25p64) */
@@ -755,6 +794,24 @@
};
#endif
+#ifdef CONFIG_I2C_BOARDINFO
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+ {
+ I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+ .type = "pcf8574_lcd",
+ },
+#endif
+#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+ {
+ I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+ .type = "pcf8574_keypad",
+ .irq = IRQ_PF8,
+ },
+#endif
+};
+#endif
+
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
static struct platform_device bfin_sport0_uart_device = {
.name = "bfin-sport-uart",
@@ -839,7 +896,32 @@
.resource = &bfin_gpios_resources,
};
+static const unsigned int cclk_vlev_datasheet[] =
+{
+ VRPAIR(VLEV_100, 400000000),
+ VRPAIR(VLEV_105, 426000000),
+ VRPAIR(VLEV_110, 500000000),
+ VRPAIR(VLEV_115, 533000000),
+ VRPAIR(VLEV_120, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
static struct platform_device *stamp_devices[] __initdata = {
+
+ &bfin_dpmc,
+
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
&bf5xx_nand_device,
#endif
@@ -921,12 +1003,22 @@
&bfin_device_gpiokeys,
#endif
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+ &ezkit_flash_device,
+#endif
+
&bfin_gpios_device,
};
static int __init stamp_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+#ifdef CONFIG_I2C_BOARDINFO
+ i2c_register_board_info(0, bfin_i2c_board_info,
+ ARRAY_SIZE(bfin_i2c_board_info));
+#endif
+
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info,
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index a03149c..ed2b0b8 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -33,12 +33,15 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
+#endif
#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>
+#include <asm/dpmc.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -341,7 +344,37 @@
};
#endif
+static const unsigned int cclk_vlev_datasheet[] =
+{
+ VRPAIR(VLEV_085, 250000000),
+ VRPAIR(VLEV_090, 376000000),
+ VRPAIR(VLEV_095, 426000000),
+ VRPAIR(VLEV_100, 426000000),
+ VRPAIR(VLEV_105, 476000000),
+ VRPAIR(VLEV_110, 476000000),
+ VRPAIR(VLEV_115, 476000000),
+ VRPAIR(VLEV_120, 600000000),
+ VRPAIR(VLEV_125, 600000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
static struct platform_device *cm_bf533_devices[] __initdata = {
+
+ &bfin_dpmc,
+
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device,
#endif
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 08a7943..9d28415 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -42,6 +42,7 @@
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>
+#include <asm/dpmc.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -350,7 +351,37 @@
};
#endif
+static const unsigned int cclk_vlev_datasheet[] =
+{
+ VRPAIR(VLEV_085, 250000000),
+ VRPAIR(VLEV_090, 376000000),
+ VRPAIR(VLEV_095, 426000000),
+ VRPAIR(VLEV_100, 426000000),
+ VRPAIR(VLEV_105, 476000000),
+ VRPAIR(VLEV_110, 476000000),
+ VRPAIR(VLEV_115, 476000000),
+ VRPAIR(VLEV_120, 600000000),
+ VRPAIR(VLEV_125, 600000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
static struct platform_device *ezkit_devices[] __initdata = {
+
+ &bfin_dpmc,
+
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device,
#endif
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 024f418..7fd35fb 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -45,6 +45,7 @@
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
#include <asm/portmux.h>
+#include <asm/dpmc.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -516,7 +517,37 @@
};
#endif
+static const unsigned int cclk_vlev_datasheet[] =
+{
+ VRPAIR(VLEV_085, 250000000),
+ VRPAIR(VLEV_090, 376000000),
+ VRPAIR(VLEV_095, 426000000),
+ VRPAIR(VLEV_100, 426000000),
+ VRPAIR(VLEV_105, 476000000),
+ VRPAIR(VLEV_110, 476000000),
+ VRPAIR(VLEV_115, 476000000),
+ VRPAIR(VLEV_120, 600000000),
+ VRPAIR(VLEV_125, 600000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
static struct platform_device *stamp_devices[] __initdata = {
+
+ &bfin_dpmc,
+
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
#endif
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index d8a23cd..73f2142 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -35,12 +35,15 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
+#endif
#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>
+#include <asm/dpmc.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -428,7 +431,37 @@
};
#endif
+static const unsigned int cclk_vlev_datasheet[] =
+{
+ VRPAIR(VLEV_085, 250000000),
+ VRPAIR(VLEV_090, 376000000),
+ VRPAIR(VLEV_095, 426000000),
+ VRPAIR(VLEV_100, 426000000),
+ VRPAIR(VLEV_105, 476000000),
+ VRPAIR(VLEV_110, 476000000),
+ VRPAIR(VLEV_115, 476000000),
+ VRPAIR(VLEV_120, 500000000),
+ VRPAIR(VLEV_125, 533000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
static struct platform_device *cm_bf537_devices[] __initdata = {
+
+ &bfin_dpmc,
+
#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
&hitachi_fb_device,
#endif
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index d3727b7..9a756d1 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -47,6 +47,7 @@
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
#include <asm/portmux.h>
+#include <asm/dpmc.h>
#include <linux/spi/ad7877.h>
/*
@@ -817,7 +818,37 @@
};
#endif
+static const unsigned int cclk_vlev_datasheet[] =
+{
+ VRPAIR(VLEV_085, 250000000),
+ VRPAIR(VLEV_090, 376000000),
+ VRPAIR(VLEV_095, 426000000),
+ VRPAIR(VLEV_100, 426000000),
+ VRPAIR(VLEV_105, 476000000),
+ VRPAIR(VLEV_110, 476000000),
+ VRPAIR(VLEV_115, 476000000),
+ VRPAIR(VLEV_120, 500000000),
+ VRPAIR(VLEV_125, 533000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
static struct platform_device *stamp_devices[] __initdata = {
+
+ &bfin_dpmc,
+
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
&bfin_pcmcia_cf_device,
#endif
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index e3e8479..3b74f96d 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -36,7 +36,9 @@
#include <linux/spi/flash.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#include <linux/usb/musb.h>
+#endif
#include <asm/bfin5xx_spi.h>
#include <asm/cplb.h>
#include <asm/dma.h>
@@ -44,6 +46,7 @@
#include <asm/nand.h>
#include <asm/portmux.h>
#include <asm/mach/bf54x_keys.h>
+#include <asm/dpmc.h>
#include <linux/input.h>
#include <linux/spi/ad7877.h>
@@ -590,7 +593,38 @@
};
#endif
+static const unsigned int cclk_vlev_datasheet[] =
+{
+/*
+ * Internal VLEV BF54XSBBC1533
+ ****temporarily using these values until data sheet is updated
+ */
+ VRPAIR(VLEV_085, 150000000),
+ VRPAIR(VLEV_090, 250000000),
+ VRPAIR(VLEV_110, 276000000),
+ VRPAIR(VLEV_115, 301000000),
+ VRPAIR(VLEV_120, 525000000),
+ VRPAIR(VLEV_125, 550000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
static struct platform_device *cm_bf548_devices[] __initdata = {
+
+ &bfin_dpmc,
+
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
#endif
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index b00f68a..d1682bb 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -46,6 +46,7 @@
#include <asm/dma.h>
#include <asm/gpio.h>
#include <asm/nand.h>
+#include <asm/dpmc.h>
#include <asm/portmux.h>
#include <asm/mach/bf54x_keys.h>
#include <linux/input.h>
@@ -689,7 +690,38 @@
.resource = &bfin_gpios_resources,
};
+static const unsigned int cclk_vlev_datasheet[] =
+{
+/*
+ * Internal VLEV BF54XSBBC1533
+ ****temporarily using these values until data sheet is updated
+ */
+ VRPAIR(VLEV_085, 150000000),
+ VRPAIR(VLEV_090, 250000000),
+ VRPAIR(VLEV_110, 276000000),
+ VRPAIR(VLEV_115, 301000000),
+ VRPAIR(VLEV_120, 525000000),
+ VRPAIR(VLEV_125, 550000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
static struct platform_device *ezkit_devices[] __initdata = {
+
+ &bfin_dpmc,
+
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
#endif
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 9fd5809..466ef59 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -33,12 +33,15 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
+#endif
#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>
+#include <asm/dpmc.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -339,8 +342,37 @@
};
#endif
+static const unsigned int cclk_vlev_datasheet[] =
+{
+ VRPAIR(VLEV_085, 250000000),
+ VRPAIR(VLEV_090, 300000000),
+ VRPAIR(VLEV_095, 313000000),
+ VRPAIR(VLEV_100, 350000000),
+ VRPAIR(VLEV_105, 400000000),
+ VRPAIR(VLEV_110, 444000000),
+ VRPAIR(VLEV_115, 450000000),
+ VRPAIR(VLEV_120, 475000000),
+ VRPAIR(VLEV_125, 500000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
static struct platform_device *cm_bf561_devices[] __initdata = {
+ &bfin_dpmc,
+
#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
&hitachi_fb_device,
#endif
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 0d74b7d..61d8f76 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -39,6 +39,7 @@
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>
+#include <asm/dpmc.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -443,7 +444,37 @@
};
#endif
+static const unsigned int cclk_vlev_datasheet[] =
+{
+ VRPAIR(VLEV_085, 250000000),
+ VRPAIR(VLEV_090, 300000000),
+ VRPAIR(VLEV_095, 313000000),
+ VRPAIR(VLEV_100, 350000000),
+ VRPAIR(VLEV_105, 400000000),
+ VRPAIR(VLEV_110, 444000000),
+ VRPAIR(VLEV_115, 450000000),
+ VRPAIR(VLEV_120, 475000000),
+ VRPAIR(VLEV_125, 500000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
static struct platform_device *ezkit_devices[] __initdata = {
+
+ &bfin_dpmc,
+
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device,
#endif
diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile
index 393081e..422bfee 100644
--- a/arch/blackfin/mach-common/Makefile
+++ b/arch/blackfin/mach-common/Makefile
@@ -6,5 +6,6 @@
cache.o cacheinit.o entry.o \
interrupt.o lock.o irqpanic.o arch_checks.o ints-priority.o
-obj-$(CONFIG_PM) += pm.o dpmc.o
-obj-$(CONFIG_CPU_FREQ) += cpufreq.o
+obj-$(CONFIG_PM) += pm.o dpmc_modes.o
+obj-$(CONFIG_CPU_FREQ) += cpufreq.o
+obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o
diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c
index ed81e00d..75cdad2 100644
--- a/arch/blackfin/mach-common/cpufreq.c
+++ b/arch/blackfin/mach-common/cpufreq.c
@@ -62,6 +62,14 @@
unsigned int tscale; /* change the divider on the core timer interrupt */
} dpm_state_table[3];
+/*
+ normalized to maximum frequncy offset for CYCLES,
+ used in time-ts cycles clock source, but could be used
+ somewhere also.
+ */
+unsigned long long __bfin_cycles_off;
+unsigned int __bfin_cycles_mod;
+
/**************************************************************************/
static unsigned int bfin_getfreq(unsigned int cpu)
@@ -80,6 +88,7 @@
unsigned int index, plldiv, tscale;
unsigned long flags, cclk_hz;
struct cpufreq_freqs freqs;
+ cycles_t cycles;
if (cpufreq_frequency_table_target(policy, bfin_freq_table,
target_freq, relation, &index))
@@ -101,8 +110,14 @@
bfin_write_PLL_DIV(plldiv);
/* we have to adjust the core timer, because it is using cclk */
bfin_write_TSCALE(tscale);
+ cycles = get_cycles();
SSYNC();
+ cycles += 10; /* ~10 cycles we loose after get_cycles() */
+ __bfin_cycles_off += (cycles << __bfin_cycles_mod) - (cycles << index);
+ __bfin_cycles_mod = index;
local_irq_restore(flags);
+ /* TODO: just test case for cycles clock source, remove later */
+ pr_debug("cpufreq: done\n");
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
return 0;
@@ -119,22 +134,13 @@
unsigned long cclk, sclk, csel, min_cclk;
int index;
-#ifdef CONFIG_CYCLES_CLOCKSOURCE
-/*
- * Clocksource CYCLES is still CONTINUOUS but not longer MONOTONIC in case we enable
- * CPU frequency scaling, since CYCLES runs off Core Clock.
- */
- printk(KERN_WARNING "CPU frequency scaling not supported: Clocksource not suitable\n"
- return -ENODEV;
-#endif
-
if (policy->cpu != 0)
return -EINVAL;
cclk = get_cclk();
sclk = get_sclk();
-#if ANOMALY_05000273
+#if ANOMALY_05000273 || (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_DCACHE))
min_cclk = sclk * 2;
#else
min_cclk = sclk;
diff --git a/arch/blackfin/mach-common/dpmc.c b/arch/blackfin/mach-common/dpmc.c
new file mode 100644
index 0000000..02c7efd
--- /dev/null
+++ b/arch/blackfin/mach-common/dpmc.c
@@ -0,0 +1,137 @@
+/*
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/cpufreq.h>
+
+#include <asm/delay.h>
+#include <asm/dpmc.h>
+
+#define DRIVER_NAME "bfin dpmc"
+
+#define dprintk(msg...) \
+ cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, DRIVER_NAME, msg)
+
+struct bfin_dpmc_platform_data *pdata;
+
+/**
+ * bfin_set_vlev - Update VLEV field in VR_CTL Reg.
+ * Avoid BYPASS sequence
+ */
+static void bfin_set_vlev(unsigned int vlev)
+{
+ unsigned pll_lcnt;
+
+ pll_lcnt = bfin_read_PLL_LOCKCNT();
+
+ bfin_write_PLL_LOCKCNT(1);
+ bfin_write_VR_CTL((bfin_read_VR_CTL() & ~VLEV) | vlev);
+ bfin_write_PLL_LOCKCNT(pll_lcnt);
+}
+
+/**
+ * bfin_get_vlev - Get CPU specific VLEV from platform device data
+ */
+static unsigned int bfin_get_vlev(unsigned int freq)
+{
+ int i;
+
+ if (!pdata)
+ goto err_out;
+
+ freq >>= 16;
+
+ for (i = 0; i < pdata->tabsize; i++)
+ if (freq <= (pdata->tuple_tab[i] & 0xFFFF))
+ return pdata->tuple_tab[i] >> 16;
+
+err_out:
+ printk(KERN_WARNING "DPMC: No suitable CCLK VDDINT voltage pair found\n");
+ return VLEV_120;
+}
+
+#ifdef CONFIG_CPU_FREQ
+static int
+vreg_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data)
+{
+ struct cpufreq_freqs *freq = data;
+
+ if (val == CPUFREQ_PRECHANGE && freq->old < freq->new) {
+ bfin_set_vlev(bfin_get_vlev(freq->new));
+ udelay(pdata->vr_settling_time); /* Wait until Volatge settled */
+
+ } else if (val == CPUFREQ_POSTCHANGE && freq->old > freq->new)
+ bfin_set_vlev(bfin_get_vlev(freq->new));
+
+ return 0;
+}
+
+static struct notifier_block vreg_cpufreq_notifier_block = {
+ .notifier_call = vreg_cpufreq_notifier
+};
+#endif /* CONFIG_CPU_FREQ */
+
+/**
+ * bfin_dpmc_probe -
+ *
+ */
+static int __devinit bfin_dpmc_probe(struct platform_device *pdev)
+{
+ if (pdev->dev.platform_data)
+ pdata = pdev->dev.platform_data;
+ else
+ return -EINVAL;
+
+ return cpufreq_register_notifier(&vreg_cpufreq_notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+/**
+ * bfin_dpmc_remove -
+ */
+static int __devexit bfin_dpmc_remove(struct platform_device *pdev)
+{
+ pdata = NULL;
+ return cpufreq_unregister_notifier(&vreg_cpufreq_notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+struct platform_driver bfin_dpmc_device_driver = {
+ .probe = bfin_dpmc_probe,
+ .remove = __devexit_p(bfin_dpmc_remove),
+ .driver = {
+ .name = DRIVER_NAME,
+ }
+};
+
+/**
+ * bfin_dpmc_init - Init driver
+ */
+static int __init bfin_dpmc_init(void)
+{
+ return platform_driver_register(&bfin_dpmc_device_driver);
+}
+module_init(bfin_dpmc_init);
+
+/**
+ * bfin_dpmc_exit - break down driver
+ */
+static void __exit bfin_dpmc_exit(void)
+{
+ platform_driver_unregister(&bfin_dpmc_device_driver);
+}
+module_exit(bfin_dpmc_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("cpu power management driver for Blackfin");
+MODULE_LICENSE("GPL");
diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc_modes.S
similarity index 82%
rename from arch/blackfin/mach-common/dpmc.S
rename to arch/blackfin/mach-common/dpmc_modes.S
index 9d45aa3..b7981d3 100644
--- a/arch/blackfin/mach-common/dpmc.S
+++ b/arch/blackfin/mach-common/dpmc_modes.S
@@ -1,30 +1,7 @@
/*
- * File: arch/blackfin/mach-common/dpmc.S
- * Based on:
- * Author: LG Soft India
+ * Copyright 2004-2008 Analog Devices Inc.
*
- * Created: ?
- * Description: Watchdog Timer APIs
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/linkage.h>
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index f2fb87e..038f70e 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -151,26 +151,62 @@
ENDPROC(_ex_soft_bp)
ENTRY(_ex_single_step)
+ /* If we just returned from an interrupt, the single step event is
+ for the RTI instruction. */
r7 = retx;
r6 = reti;
cc = r7 == r6;
- if cc jump _bfin_return_from_exception
+ if cc jump _bfin_return_from_exception;
+
+ /* If we were in user mode, do the single step normally. */
+ p5.l = lo(IPEND);
+ p5.h = hi(IPEND);
+ r6 = [p5];
+ r7 = 0xffe0 (z);
+ r7 = r7 & r6;
+ cc = r7 == 0;
+ if !cc jump 1f;
+
+ /* Single stepping only a single instruction, so clear the trace
+ * bit here. */
+ r7 = syscfg;
+ bitclr (r7, 0);
+ syscfg = R7;
+ jump _ex_trap_c;
+
+1:
+ /*
+ * We were in an interrupt handler. By convention, all of them save
+ * SYSCFG with their first instruction, so by checking whether our
+ * RETX points at the entry point, we can determine whether to allow
+ * a single step, or whether to clear SYSCFG.
+ *
+ * First, find out the interrupt level and the event vector for it.
+ */
+ p5.l = lo(EVT0);
+ p5.h = hi(EVT0);
+ p5 += -4;
+2:
+ r7 = rot r7 by -1;
+ p5 += 4;
+ if !cc jump 2b;
+
+ /* What we actually do is test for the _second_ instruction in the
+ * IRQ handler. That way, if there are insns following the restore
+ * of SYSCFG after leaving the handler, we will not turn off SYSCFG
+ * for them. */
+
+ r7 = [p5];
+ r7 += 2;
+ r6 = RETX;
+ cc = R7 == R6;
+ if !cc jump _bfin_return_from_exception;
+
r7 = syscfg;
bitclr (r7, 0);
syscfg = R7;
- p5.l = lo(IPEND);
- p5.h = hi(IPEND);
- r6 = [p5];
- cc = bittst(r6, 5);
- if !cc jump _ex_trap_c;
- p4.l = lo(EVT5);
- p4.h = hi(EVT5);
- r6.h = _exception_to_level5;
- r6.l = _exception_to_level5;
- r7 = [p4];
- cc = r6 == r7;
- if !cc jump _ex_trap_c;
+ /* Fall through to _bfin_return_from_exception. */
ENDPROC(_ex_single_step)
ENTRY(_bfin_return_from_exception)
@@ -234,20 +270,26 @@
p5.l = _saved_icplb_fault_addr;
[p5] = r7;
- p4.l = __retx;
- p4.h = __retx;
+ p4.l = _excpt_saved_stuff;
+ p4.h = _excpt_saved_stuff;
+
r6 = retx;
[p4] = r6;
- p4.l = lo(SAFE_USER_INSTRUCTION);
- p4.h = hi(SAFE_USER_INSTRUCTION);
- retx = p4;
+
+ r6 = SYSCFG;
+ [p4 + 4] = r6;
+ BITCLR(r6, 0);
+ SYSCFG = r6;
/* Disable all interrupts, but make sure level 5 is enabled so
* we can switch to that level. Save the old mask. */
cli r6;
- p4.l = _excpt_saved_imask;
- p4.h = _excpt_saved_imask;
- [p4] = r6;
+ [p4 + 8] = r6;
+
+ p4.l = lo(SAFE_USER_INSTRUCTION);
+ p4.h = hi(SAFE_USER_INSTRUCTION);
+ retx = p4;
+
r6 = 0x3f;
sti r6;
@@ -295,6 +337,11 @@
*/
SAVE_ALL_SYS
+ /* The dumping functions expect the return address in the RETI
+ * slot. */
+ r6 = retx;
+ [sp + PT_PC] = r6;
+
r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
SP += -12;
call _double_fault_c;
@@ -307,16 +354,17 @@
ENTRY(_exception_to_level5)
SAVE_ALL_SYS
- p4.l = __retx;
- p4.h = __retx;
+ p4.l = _excpt_saved_stuff;
+ p4.h = _excpt_saved_stuff;
r6 = [p4];
[sp + PT_PC] = r6;
+ r6 = [p4 + 4];
+ [sp + PT_SYSCFG] = r6;
+
/* Restore interrupt mask. We haven't pushed RETI, so this
* doesn't enable interrupts until we return from this handler. */
- p4.l = _excpt_saved_imask;
- p4.h = _excpt_saved_imask;
- r6 = [p4];
+ r6 = [p4 + 8];
sti r6;
/* Restore the hardware error vector. */
@@ -1344,7 +1392,14 @@
.rept NR_syscalls-(.-_sys_call_table)/4
.long _sys_ni_syscall
.endr
-_excpt_saved_imask:
+
+ /*
+ * Used to save the real RETX, IMASK and SYSCFG when temporarily
+ * storing safe values across the transition from exception to IRQ5.
+ */
+_excpt_saved_stuff:
+ .long 0;
+ .long 0;
.long 0;
_exception_stack:
@@ -1358,7 +1413,3 @@
_last_cplb_fault_retx:
.long 0;
#endif
- /* Used to save the real RETX when temporarily storing a safe
- * return address. */
-__retx:
- .long 0;
diff --git a/arch/cris/kernel/sys_cris.c b/arch/cris/kernel/sys_cris.c
index 8b99841..a79fbd87 100644
--- a/arch/cris/kernel/sys_cris.c
+++ b/arch/cris/kernel/sys_cris.c
@@ -27,25 +27,6 @@
#include <asm/uaccess.h>
#include <asm/segment.h>
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way Unix traditionally does this, though.
- */
-asmlinkage int sys_pipe(unsigned long __user * fildes)
-{
- int fd[2];
- int error;
-
- lock_kernel();
- error = do_pipe(fd);
- unlock_kernel();
- if (!error) {
- if (copy_to_user(fildes, fd, 2*sizeof(int)))
- error = -EFAULT;
- }
- return error;
-}
-
/* common code for old and new mmaps */
static inline long
do_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
diff --git a/arch/frv/kernel/sys_frv.c b/arch/frv/kernel/sys_frv.c
index 04c6b16..49b2cf2 100644
--- a/arch/frv/kernel/sys_frv.c
+++ b/arch/frv/kernel/sys_frv.c
@@ -28,23 +28,6 @@
#include <asm/setup.h>
#include <asm/uaccess.h>
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-asmlinkage long sys_pipe(unsigned long __user * fildes)
-{
- int fd[2];
- int error;
-
- error = do_pipe(fd);
- if (!error) {
- if (copy_to_user(fildes, fd, 2*sizeof(int)))
- error = -EFAULT;
- }
- return error;
-}
-
asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
unsigned long prot, unsigned long flags,
unsigned long fd, unsigned long pgoff)
diff --git a/arch/frv/mm/Makefile b/arch/frv/mm/Makefile
index fb8b1d8..1bca5ab 100644
--- a/arch/frv/mm/Makefile
+++ b/arch/frv/mm/Makefile
@@ -6,4 +6,4 @@
obj-$(CONFIG_MMU) += \
pgalloc.o highmem.o fault.o extable.o cache-page.o tlb-flush.o tlb-miss.o \
- mmu-context.o dma-alloc.o unaligned.o elf-fdpic.o
+ mmu-context.o dma-alloc.o elf-fdpic.o
diff --git a/arch/h8300/kernel/sys_h8300.c b/arch/h8300/kernel/sys_h8300.c
index 00608be6..2745656 100644
--- a/arch/h8300/kernel/sys_h8300.c
+++ b/arch/h8300/kernel/sys_h8300.c
@@ -27,23 +27,6 @@
#include <asm/traps.h>
#include <asm/unistd.h>
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-asmlinkage int sys_pipe(unsigned long * fildes)
-{
- int fd[2];
- int error;
-
- error = do_pipe(fd);
- if (!error) {
- if (copy_to_user(fildes, fd, 2*sizeof(int)))
- error = -EFAULT;
- }
- return error;
-}
-
/* common code for old and new mmaps */
static inline long do_mmap2(
unsigned long addr, unsigned long len,
diff --git a/arch/ia64/ia32/ia32_signal.c b/arch/ia64/ia32/ia32_signal.c
index 256a7fa..b763ca1 100644
--- a/arch/ia64/ia32/ia32_signal.c
+++ b/arch/ia64/ia32/ia32_signal.c
@@ -463,7 +463,7 @@
current->state = TASK_INTERRUPTIBLE;
schedule();
- set_thread_flag(TIF_RESTORE_SIGMASK);
+ set_restore_sigmask();
return -ERESTARTNOHAND;
}
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index c7467f8..19709a0 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -966,7 +966,7 @@
fs_initcall(acpi_map_iosapics);
#endif /* CONFIG_ACPI_NUMA */
-int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
+int __ref acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
{
int err;
diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c
index 6dee579..7fd18f5 100644
--- a/arch/ia64/kernel/irq.c
+++ b/arch/ia64/kernel/irq.c
@@ -183,10 +183,10 @@
{
unsigned int irq;
extern void ia64_process_pending_intr(void);
- extern void ia64_disable_timer(void);
extern volatile int time_keeper_id;
- ia64_disable_timer();
+ /* Mask ITV to disable timer */
+ ia64_set_itv(1 << 16);
/*
* Find a new timesync master
diff --git a/arch/ia64/kernel/palinfo.c b/arch/ia64/kernel/palinfo.c
index 396004e..4547a20 100644
--- a/arch/ia64/kernel/palinfo.c
+++ b/arch/ia64/kernel/palinfo.c
@@ -1053,7 +1053,7 @@
return NOTIFY_OK;
}
-static struct notifier_block palinfo_cpu_notifier __cpuinitdata =
+static struct notifier_block __refdata palinfo_cpu_notifier =
{
.notifier_call = palinfo_cpu_callback,
.priority = 0,
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 7fbb51e..c1ad27d 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -867,7 +867,7 @@
}
static pfm_context_t *
-pfm_context_alloc(void)
+pfm_context_alloc(int ctx_flags)
{
pfm_context_t *ctx;
@@ -878,6 +878,46 @@
ctx = kzalloc(sizeof(pfm_context_t), GFP_KERNEL);
if (ctx) {
DPRINT(("alloc ctx @%p\n", ctx));
+
+ /*
+ * init context protection lock
+ */
+ spin_lock_init(&ctx->ctx_lock);
+
+ /*
+ * context is unloaded
+ */
+ ctx->ctx_state = PFM_CTX_UNLOADED;
+
+ /*
+ * initialization of context's flags
+ */
+ ctx->ctx_fl_block = (ctx_flags & PFM_FL_NOTIFY_BLOCK) ? 1 : 0;
+ ctx->ctx_fl_system = (ctx_flags & PFM_FL_SYSTEM_WIDE) ? 1: 0;
+ ctx->ctx_fl_no_msg = (ctx_flags & PFM_FL_OVFL_NO_MSG) ? 1: 0;
+ /*
+ * will move to set properties
+ * ctx->ctx_fl_excl_idle = (ctx_flags & PFM_FL_EXCL_IDLE) ? 1: 0;
+ */
+
+ /*
+ * init restart semaphore to locked
+ */
+ init_completion(&ctx->ctx_restart_done);
+
+ /*
+ * activation is used in SMP only
+ */
+ ctx->ctx_last_activation = PFM_INVALID_ACTIVATION;
+ SET_LAST_CPU(ctx, -1);
+
+ /*
+ * initialize notification message queue
+ */
+ ctx->ctx_msgq_head = ctx->ctx_msgq_tail = 0;
+ init_waitqueue_head(&ctx->ctx_msgq_wait);
+ init_waitqueue_head(&ctx->ctx_zombieq);
+
}
return ctx;
}
@@ -2165,28 +2205,21 @@
};
-static int
-pfm_alloc_fd(struct file **cfile)
+static struct file *
+pfm_alloc_file(pfm_context_t *ctx)
{
- int fd, ret = 0;
- struct file *file = NULL;
- struct inode * inode;
+ struct file *file;
+ struct inode *inode;
+ struct dentry *dentry;
char name[32];
struct qstr this;
- fd = get_unused_fd();
- if (fd < 0) return -ENFILE;
-
- ret = -ENFILE;
-
- file = get_empty_filp();
- if (!file) goto out;
-
/*
* allocate a new inode
*/
inode = new_inode(pfmfs_mnt->mnt_sb);
- if (!inode) goto out;
+ if (!inode)
+ return ERR_PTR(-ENOMEM);
DPRINT(("new inode ino=%ld @%p\n", inode->i_ino, inode));
@@ -2199,59 +2232,28 @@
this.len = strlen(name);
this.hash = inode->i_ino;
- ret = -ENOMEM;
-
/*
* allocate a new dcache entry
*/
- file->f_path.dentry = d_alloc(pfmfs_mnt->mnt_sb->s_root, &this);
- if (!file->f_path.dentry) goto out;
+ dentry = d_alloc(pfmfs_mnt->mnt_sb->s_root, &this);
+ if (!dentry) {
+ iput(inode);
+ return ERR_PTR(-ENOMEM);
+ }
- file->f_path.dentry->d_op = &pfmfs_dentry_operations;
+ dentry->d_op = &pfmfs_dentry_operations;
+ d_add(dentry, inode);
- d_add(file->f_path.dentry, inode);
- file->f_path.mnt = mntget(pfmfs_mnt);
- file->f_mapping = inode->i_mapping;
+ file = alloc_file(pfmfs_mnt, dentry, FMODE_READ, &pfm_file_ops);
+ if (!file) {
+ dput(dentry);
+ return ERR_PTR(-ENFILE);
+ }
- file->f_op = &pfm_file_ops;
- file->f_mode = FMODE_READ;
file->f_flags = O_RDONLY;
- file->f_pos = 0;
+ file->private_data = ctx;
- /*
- * may have to delay until context is attached?
- */
- fd_install(fd, file);
-
- /*
- * the file structure we will use
- */
- *cfile = file;
-
- return fd;
-out:
- if (file) put_filp(file);
- put_unused_fd(fd);
- return ret;
-}
-
-static void
-pfm_free_fd(int fd, struct file *file)
-{
- struct files_struct *files = current->files;
- struct fdtable *fdt;
-
- /*
- * there ie no fd_uninstall(), so we do it here
- */
- spin_lock(&files->file_lock);
- fdt = files_fdtable(files);
- rcu_assign_pointer(fdt->fd[fd], NULL);
- spin_unlock(&files->file_lock);
-
- if (file)
- put_filp(file);
- put_unused_fd(fd);
+ return file;
}
static int
@@ -2475,6 +2477,7 @@
/* link buffer format and context */
ctx->ctx_buf_fmt = fmt;
+ ctx->ctx_fl_is_sampling = 1; /* assume record() is defined */
/*
* check if buffer format wants to use perfmon buffer allocation/mapping service
@@ -2669,78 +2672,45 @@
{
pfarg_context_t *req = (pfarg_context_t *)arg;
struct file *filp;
+ struct path path;
int ctx_flags;
+ int fd;
int ret;
/* let's check the arguments first */
ret = pfarg_is_sane(current, req);
- if (ret < 0) return ret;
+ if (ret < 0)
+ return ret;
ctx_flags = req->ctx_flags;
ret = -ENOMEM;
- ctx = pfm_context_alloc();
- if (!ctx) goto error;
+ fd = get_unused_fd();
+ if (fd < 0)
+ return fd;
- ret = pfm_alloc_fd(&filp);
- if (ret < 0) goto error_file;
+ ctx = pfm_context_alloc(ctx_flags);
+ if (!ctx)
+ goto error;
- req->ctx_fd = ctx->ctx_fd = ret;
+ filp = pfm_alloc_file(ctx);
+ if (IS_ERR(filp)) {
+ ret = PTR_ERR(filp);
+ goto error_file;
+ }
- /*
- * attach context to file
- */
- filp->private_data = ctx;
+ req->ctx_fd = ctx->ctx_fd = fd;
/*
* does the user want to sample?
*/
if (pfm_uuid_cmp(req->ctx_smpl_buf_id, pfm_null_uuid)) {
ret = pfm_setup_buffer_fmt(current, filp, ctx, ctx_flags, 0, req);
- if (ret) goto buffer_error;
+ if (ret)
+ goto buffer_error;
}
- /*
- * init context protection lock
- */
- spin_lock_init(&ctx->ctx_lock);
-
- /*
- * context is unloaded
- */
- ctx->ctx_state = PFM_CTX_UNLOADED;
-
- /*
- * initialization of context's flags
- */
- ctx->ctx_fl_block = (ctx_flags & PFM_FL_NOTIFY_BLOCK) ? 1 : 0;
- ctx->ctx_fl_system = (ctx_flags & PFM_FL_SYSTEM_WIDE) ? 1: 0;
- ctx->ctx_fl_is_sampling = ctx->ctx_buf_fmt ? 1 : 0; /* assume record() is defined */
- ctx->ctx_fl_no_msg = (ctx_flags & PFM_FL_OVFL_NO_MSG) ? 1: 0;
- /*
- * will move to set properties
- * ctx->ctx_fl_excl_idle = (ctx_flags & PFM_FL_EXCL_IDLE) ? 1: 0;
- */
-
- /*
- * init restart semaphore to locked
- */
- init_completion(&ctx->ctx_restart_done);
-
- /*
- * activation is used in SMP only
- */
- ctx->ctx_last_activation = PFM_INVALID_ACTIVATION;
- SET_LAST_CPU(ctx, -1);
-
- /*
- * initialize notification message queue
- */
- ctx->ctx_msgq_head = ctx->ctx_msgq_tail = 0;
- init_waitqueue_head(&ctx->ctx_msgq_wait);
- init_waitqueue_head(&ctx->ctx_zombieq);
-
DPRINT(("ctx=%p flags=0x%x system=%d notify_block=%d excl_idle=%d no_msg=%d ctx_fd=%d \n",
ctx,
ctx_flags,
@@ -2755,10 +2725,14 @@
*/
pfm_reset_pmu_state(ctx);
+ fd_install(fd, filp);
+
return 0;
buffer_error:
- pfm_free_fd(ctx->ctx_fd, filp);
+ path = filp->f_path;
+ put_filp(filp);
+ path_put(&path);
if (ctx->ctx_buf_fmt) {
pfm_buf_fmt_exit(ctx->ctx_buf_fmt, current, NULL, regs);
@@ -2767,6 +2741,7 @@
pfm_context_free(ctx);
error:
+ put_unused_fd(fd);
return ret;
}
diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c
index 5740296c..19c5a78 100644
--- a/arch/ia64/kernel/signal.c
+++ b/arch/ia64/kernel/signal.c
@@ -464,7 +464,7 @@
if (!user_mode(&scr->pt))
return;
- if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK)
oldset = ¤t->saved_sigmask;
else
oldset = ¤t->blocked;
@@ -530,12 +530,13 @@
* continue to iterate in this loop so we can deliver the SIGSEGV...
*/
if (handle_signal(signr, &ka, &info, oldset, scr)) {
- /* a signal was successfully delivered; the saved
+ /*
+ * A signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
* and will be restored by sigreturn, so we can simply
- * clear the TIF_RESTORE_SIGMASK flag */
- if (test_thread_flag(TIF_RESTORE_SIGMASK))
- clear_thread_flag(TIF_RESTORE_SIGMASK);
+ * clear the TS_RESTORE_SIGMASK flag.
+ */
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
return;
}
}
@@ -566,8 +567,8 @@
/* if there's no signal to deliver, we just put the saved sigmask
* back */
- if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
- clear_thread_flag(TIF_RESTORE_SIGMASK);
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
}
diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index 9a9d4c4..983296f 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -98,8 +98,33 @@
spin_unlock_irq(&call_lock);
}
+static inline void
+handle_call_data(void)
+{
+ struct call_data_struct *data;
+ void (*func)(void *info);
+ void *info;
+ int wait;
+
+ /* release the 'pointer lock' */
+ data = (struct call_data_struct *)call_data;
+ func = data->func;
+ info = data->info;
+ wait = data->wait;
+
+ mb();
+ atomic_inc(&data->started);
+ /* At this point the structure may be gone unless wait is true. */
+ (*func)(info);
+
+ /* Notify the sending CPU that the task is done. */
+ mb();
+ if (wait)
+ atomic_inc(&data->finished);
+}
+
static void
-stop_this_cpu (void)
+stop_this_cpu(void)
{
/*
* Remove this CPU:
@@ -138,44 +163,21 @@
ops &= ~(1 << which);
switch (which) {
- case IPI_CALL_FUNC:
- {
- struct call_data_struct *data;
- void (*func)(void *info);
- void *info;
- int wait;
+ case IPI_CALL_FUNC:
+ handle_call_data();
+ break;
- /* release the 'pointer lock' */
- data = (struct call_data_struct *) call_data;
- func = data->func;
- info = data->info;
- wait = data->wait;
-
- mb();
- atomic_inc(&data->started);
- /*
- * At this point the structure may be gone unless
- * wait is true.
- */
- (*func)(info);
-
- /* Notify the sending CPU that the task is done. */
- mb();
- if (wait)
- atomic_inc(&data->finished);
- }
- break;
-
- case IPI_CPU_STOP:
+ case IPI_CPU_STOP:
stop_this_cpu();
break;
#ifdef CONFIG_KEXEC
- case IPI_KDUMP_CPU_STOP:
+ case IPI_KDUMP_CPU_STOP:
unw_init_running(kdump_cpu_freeze, NULL);
break;
#endif
- default:
- printk(KERN_CRIT "Unknown IPI on CPU %d: %lu\n", this_cpu, which);
+ default:
+ printk(KERN_CRIT "Unknown IPI on CPU %d: %lu\n",
+ this_cpu, which);
break;
}
} while (ops);
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 48e15a5..8c73643 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -379,11 +379,6 @@
.name = "timer"
};
-void __devinit ia64_disable_timer(void)
-{
- ia64_set_itv(1 << 16);
-}
-
void __init
time_init (void)
{
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index abb17a6..26228e2 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -36,9 +36,11 @@
}
EXPORT_SYMBOL_GPL(arch_fix_phys_package_id);
-int arch_register_cpu(int num)
+
+#ifdef CONFIG_HOTPLUG_CPU
+int __ref arch_register_cpu(int num)
{
-#if defined (CONFIG_ACPI) && defined (CONFIG_HOTPLUG_CPU)
+#ifdef CONFIG_ACPI
/*
* If CPEI can be re-targetted or if this is not
* CPEI target, then it is hotpluggable
@@ -47,19 +49,21 @@
sysfs_cpus[num].cpu.hotpluggable = 1;
map_cpu_to_node(num, node_cpuid[num].nid);
#endif
-
return register_cpu(&sysfs_cpus[num].cpu, num);
}
-
-#ifdef CONFIG_HOTPLUG_CPU
+EXPORT_SYMBOL(arch_register_cpu);
void arch_unregister_cpu(int num)
{
unregister_cpu(&sysfs_cpus[num].cpu);
unmap_cpu_from_node(num, cpu_to_node(num));
}
-EXPORT_SYMBOL(arch_register_cpu);
EXPORT_SYMBOL(arch_unregister_cpu);
+#else
+static int __init arch_register_cpu(int num)
+{
+ return register_cpu(&sysfs_cpus[num].cpu, num);
+}
#endif /*CONFIG_HOTPLUG_CPU*/
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 6df0732..318b811 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -1,4 +1,3 @@
-
/*
* kvm_ia64.c: Basic KVM suppport On Itanium series processors
*
@@ -431,7 +430,7 @@
if (itc_diff < 0)
itc_diff = -itc_diff;
- expires = div64_64(itc_diff, cyc_per_usec);
+ expires = div64_u64(itc_diff, cyc_per_usec);
kt = ktime_set(0, 1000 * expires);
vcpu->arch.ht_active = 1;
hrtimer_start(p_ht, kt, HRTIMER_MODE_ABS);
diff --git a/arch/m32r/Makefile b/arch/m32r/Makefile
index 4072a07..469766b 100644
--- a/arch/m32r/Makefile
+++ b/arch/m32r/Makefile
@@ -5,6 +5,8 @@
# architecture-specific flags and dependencies.
#
+KBUILD_DEFCONFIG := m32700ut.smp_defconfig
+
LDFLAGS :=
OBJCOPYFLAGS := -O binary -R .note -R .comment -S
LDFLAGS_vmlinux :=
diff --git a/arch/m32r/defconfig b/arch/m32r/defconfig
deleted file mode 100644
index af3b981..0000000
--- a/arch/m32r/defconfig
+++ /dev/null
@@ -1,863 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Wed Aug 1 17:22:35 2007
-#
-CONFIG_M32R=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_NO_IOPORT=y
-CONFIG_NO_DMA=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_CPUSETS is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# Processor type and features
-#
-# CONFIG_PLAT_MAPPI is not set
-# CONFIG_PLAT_USRV is not set
-CONFIG_PLAT_M32700UT=y
-# CONFIG_PLAT_OPSPUT is not set
-# CONFIG_PLAT_OAKS32R is not set
-# CONFIG_PLAT_MAPPI2 is not set
-# CONFIG_PLAT_MAPPI3 is not set
-# CONFIG_PLAT_M32104UT is not set
-CONFIG_CHIP_M32700=y
-# CONFIG_CHIP_M32102 is not set
-# CONFIG_CHIP_M32104 is not set
-# CONFIG_CHIP_VDEC2 is not set
-# CONFIG_CHIP_OPSP is not set
-CONFIG_MMU=y
-CONFIG_TLB_ENTRIES=32
-CONFIG_ISA_M32R2=y
-CONFIG_ISA_DSP_LEVEL2=y
-CONFIG_ISA_DUAL_ISSUE=y
-CONFIG_BUS_CLOCK=50000000
-CONFIG_TIMER_DIVIDE=128
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_MEMORY_START=0x08000000
-CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_NOHIGHMEM=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_IRAM_START=0x00f00000
-CONFIG_IRAM_SIZE=0x00080000
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_PREEMPT=y
-CONFIG_SMP=y
-# CONFIG_CHIP_M32700_TS1 is not set
-CONFIG_NR_CPUS=2
-CONFIG_NODES_SHIFT=1
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_ISA is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=m
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_ATA_OVER_ETH=m
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_SMC91X=y
-# CONFIG_NE2000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_M32R_SIO=y
-CONFIG_SERIAL_M32R_SIO_CONSOLE=y
-CONFIG_SERIAL_M32R_PLDSIO=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
-CONFIG_DS1302=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_CPIA is not set
-CONFIG_VIDEO_M32R_AR=m
-CONFIG_VIDEO_M32R_AR_M64278=m
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_S1D13XXX=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_M32R_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD_DEBUG=y
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
diff --git a/arch/m32r/kernel/sys_m32r.c b/arch/m32r/kernel/sys_m32r.c
index 6d7a80f..305ac85 100644
--- a/arch/m32r/kernel/sys_m32r.c
+++ b/arch/m32r/kernel/sys_m32r.c
@@ -76,26 +76,6 @@
return oldval;
}
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way Unix traditionally does this, though.
- */
-asmlinkage int
-sys_pipe(unsigned long r0, unsigned long r1, unsigned long r2,
- unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, struct pt_regs regs)
-{
- int fd[2];
- int error;
-
- error = do_pipe(fd);
- if (!error) {
- if (copy_to_user((void __user *)r0, fd, 2*sizeof(int)))
- error = -EFAULT;
- }
- return error;
-}
-
asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
unsigned long prot, unsigned long flags,
unsigned long fd, unsigned long pgoff)
diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S
index 41b0785..15a6f36 100644
--- a/arch/m32r/kernel/vmlinux.lds.S
+++ b/arch/m32r/kernel/vmlinux.lds.S
@@ -60,9 +60,6 @@
. = ALIGN(4096);
__nosave_end = .;
- . = ALIGN(4096);
- .data.page_aligned : { *(.data.idt) }
-
. = ALIGN(32);
.data.cacheline_aligned : { *(.data.cacheline_aligned) }
diff --git a/arch/m68k/kernel/sys_m68k.c b/arch/m68k/kernel/sys_m68k.c
index e892f17b..7f54efa 100644
--- a/arch/m68k/kernel/sys_m68k.c
+++ b/arch/m68k/kernel/sys_m68k.c
@@ -30,23 +30,6 @@
#include <asm/page.h>
#include <asm/unistd.h>
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-asmlinkage int sys_pipe(unsigned long __user * fildes)
-{
- int fd[2];
- int error;
-
- error = do_pipe(fd);
- if (!error) {
- if (copy_to_user(fildes, fd, 2*sizeof(int)))
- error = -EFAULT;
- }
- return error;
-}
-
/* common code for old and new mmaps */
static inline long do_mmap2(
unsigned long addr, unsigned long len,
diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c
index fd4858e..75b8340 100644
--- a/arch/m68k/kernel/traps.c
+++ b/arch/m68k/kernel/traps.c
@@ -468,15 +468,26 @@
* (if do_page_fault didn't fix the mapping,
* the writeback won't do good)
*/
+disable_wb:
#ifdef DEBUG
printk(".. disabling wb2\n");
#endif
if (fp->un.fmt7.wb2a == fp->un.fmt7.faddr)
fp->un.fmt7.wb2s &= ~WBV_040;
+ if (fp->un.fmt7.wb3a == fp->un.fmt7.faddr)
+ fp->un.fmt7.wb3s &= ~WBV_040;
}
- } else if (send_fault_sig(&fp->ptregs) > 0) {
- printk("68040 access error, ssw=%x\n", ssw);
- trap_c(fp);
+ } else {
+ /* In case of a bus error we either kill the process or expect
+ * the kernel to catch the fault, which then is also responsible
+ * for cleaning up the mess.
+ */
+ current->thread.signo = SIGBUS;
+ current->thread.faddr = fp->un.fmt7.faddr;
+ if (send_fault_sig(&fp->ptregs) >= 0)
+ printk("68040 bus error (ssw=%x, faddr=%lx)\n", ssw,
+ fp->un.fmt7.faddr);
+ goto disable_wb;
}
do_040writebacks(fp);
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index 735a49b..ad3e3ba 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -48,9 +48,6 @@
struct mac_booter_data mac_bi_data;
int mac_bisize = sizeof mac_bi_data;
-struct mac_hw_present mac_hw_present;
-EXPORT_SYMBOL(mac_hw_present);
-
/* New m68k bootinfo stuff and videobase */
extern int m68k_num_memory;
@@ -817,27 +814,6 @@
m68k_ramdisk.addr, m68k_ramdisk.size);
#endif
- /*
- * TODO: set the various fields in macintosh_config->hw_present here!
- */
- switch (macintosh_config->scsi_type) {
- case MAC_SCSI_OLD:
- MACHW_SET(MAC_SCSI_80);
- break;
- case MAC_SCSI_QUADRA:
- case MAC_SCSI_QUADRA2:
- case MAC_SCSI_QUADRA3:
- MACHW_SET(MAC_SCSI_96);
- if ((macintosh_config->ident == MAC_MODEL_Q900) ||
- (macintosh_config->ident == MAC_MODEL_Q950))
- MACHW_SET(MAC_SCSI_96_2);
- break;
- default:
- printk(KERN_WARNING "config.c: wtf: unknown scsi, using 53c80\n");
- MACHW_SET(MAC_SCSI_80);
- break;
- }
-
iop_init();
via_init();
oss_init();
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 07eb4c4..8e84415 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -671,6 +671,9 @@
endchoice
+if COLDFIRE
+source "kernel/Kconfig.preempt"
+endif
source "mm/Kconfig"
endmenu
diff --git a/arch/m68knommu/kernel/asm-offsets.c b/arch/m68knommu/kernel/asm-offsets.c
index fd0c685..c785d07 100644
--- a/arch/m68knommu/kernel/asm-offsets.c
+++ b/arch/m68knommu/kernel/asm-offsets.c
@@ -87,6 +87,7 @@
DEFINE(TI_TASK, offsetof(struct thread_info, task));
DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
+ DEFINE(TI_PREEMPTCOUNT, offsetof(struct thread_info, preempt_count));
DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
return 0;
diff --git a/arch/m68knommu/kernel/entry.S b/arch/m68knommu/kernel/entry.S
index 1e7ea6a3..f4782d2 100644
--- a/arch/m68knommu/kernel/entry.S
+++ b/arch/m68knommu/kernel/entry.S
@@ -32,6 +32,7 @@
#include <asm/segment.h>
#include <asm/asm-offsets.h>
#include <asm/entry.h>
+#include <asm/unistd.h>
.text
@@ -140,3 +141,11 @@
RESTORE_SWITCH_STACK
rts
+ENTRY(ret_from_user_signal)
+ moveq #__NR_sigreturn,%d0
+ trap #0
+
+ENTRY(ret_from_user_rt_signal)
+ move #__NR_rt_sigreturn,%d0
+ trap #0
+
diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c
index d6f0200..03f4fe6 100644
--- a/arch/m68knommu/kernel/setup.c
+++ b/arch/m68knommu/kernel/setup.c
@@ -162,7 +162,7 @@
printk(KERN_INFO "DragonEngine II board support by Georges Menie\n");
#endif
#ifdef CONFIG_M5235EVB
- printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)");
+ printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n");
#endif
#ifdef DEBUG
diff --git a/arch/m68knommu/kernel/signal.c b/arch/m68knommu/kernel/signal.c
index 7037137..bbfcae9 100644
--- a/arch/m68knommu/kernel/signal.c
+++ b/arch/m68knommu/kernel/signal.c
@@ -51,6 +51,8 @@
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+void ret_from_user_signal(void);
+void ret_from_user_rt_signal(void);
asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs);
/*
@@ -539,10 +541,6 @@
return err;
}
-static inline void push_cache (unsigned long vaddr)
-{
-}
-
static inline void *
get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
{
@@ -586,16 +584,11 @@
err |= copy_to_user (&frame->sc, &context, sizeof(context));
/* Set up to return from userspace. */
- err |= __put_user(frame->retcode, &frame->pretcode);
- /* moveq #,d0; trap #0 */
- err |= __put_user(0x70004e40 + (__NR_sigreturn << 16),
- (long *)(frame->retcode));
+ err |= __put_user((void *) ret_from_user_signal, &frame->pretcode);
if (err)
goto give_sigsegv;
- push_cache ((unsigned long) &frame->retcode);
-
/* Set up registers for signal handler */
wrusp ((unsigned long) frame);
regs->pc = (unsigned long) ka->sa.sa_handler;
@@ -655,17 +648,11 @@
err |= copy_to_user (&frame->uc.uc_sigmask, set, sizeof(*set));
/* Set up to return from userspace. */
- err |= __put_user(frame->retcode, &frame->pretcode);
- /* moveq #,d0; notb d0; trap #0 */
- err |= __put_user(0x70004600 + ((__NR_rt_sigreturn ^ 0xff) << 16),
- (long *)(frame->retcode + 0));
- err |= __put_user(0x4e40, (short *)(frame->retcode + 4));
+ err |= __put_user((void *) ret_from_user_rt_signal, &frame->pretcode);
if (err)
goto give_sigsegv;
- push_cache ((unsigned long) &frame->retcode);
-
/* Set up registers for signal handler */
wrusp ((unsigned long) frame);
regs->pc = (unsigned long) ka->sa.sa_handler;
diff --git a/arch/m68knommu/kernel/sys_m68k.c b/arch/m68knommu/kernel/sys_m68k.c
index 65f7a95..7002816 100644
--- a/arch/m68knommu/kernel/sys_m68k.c
+++ b/arch/m68knommu/kernel/sys_m68k.c
@@ -28,23 +28,6 @@
#include <asm/cacheflush.h>
#include <asm/unistd.h>
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-asmlinkage int sys_pipe(unsigned long * fildes)
-{
- int fd[2];
- int error;
-
- error = do_pipe(fd);
- if (!error) {
- if (copy_to_user(fildes, fd, 2*sizeof(int)))
- error = -EFAULT;
- }
- return error;
-}
-
/* common code for old and new mmaps */
static inline long do_mmap2(
unsigned long addr, unsigned long len,
diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c
index 437a061..ec9aea6 100644
--- a/arch/m68knommu/kernel/traps.c
+++ b/arch/m68knommu/kernel/traps.c
@@ -28,6 +28,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <linux/ptrace.h>
+#include <linux/kallsyms.h>
#include <asm/setup.h>
#include <asm/fpu.h>
@@ -102,56 +103,47 @@
force_sig(SIGSEGV, current);
}
-
int kstack_depth_to_print = 48;
-void show_stack(struct task_struct *task, unsigned long *stack)
+static void __show_stack(struct task_struct *task, unsigned long *stack)
{
unsigned long *endstack, addr;
- extern char _start, _etext;
+ unsigned long *last_stack;
int i;
- if (!stack) {
- if (task)
- stack = (unsigned long *)task->thread.ksp;
- else
- stack = (unsigned long *)&stack;
- }
+ if (!stack)
+ stack = (unsigned long *)task->thread.ksp;
addr = (unsigned long) stack;
endstack = (unsigned long *) PAGE_ALIGN(addr);
printk(KERN_EMERG "Stack from %08lx:", (unsigned long)stack);
for (i = 0; i < kstack_depth_to_print; i++) {
- if (stack + 1 > endstack)
+ if (stack + 1 + i > endstack)
break;
if (i % 8 == 0)
printk("\n" KERN_EMERG " ");
- printk(" %08lx", *stack++);
+ printk(" %08lx", *(stack + i));
}
printk("\n");
- printk(KERN_EMERG "Call Trace:");
- i = 0;
- while (stack + 1 <= endstack) {
- addr = *stack++;
- /*
- * If the address is either in the text segment of the
- * kernel, or in the region which contains vmalloc'ed
- * memory, it *may* be the address of a calling
- * routine; if so, print it so that someone tracing
- * down the cause of the crash will be able to figure
- * out the call path that was taken.
- */
- if (((addr >= (unsigned long) &_start) &&
- (addr <= (unsigned long) &_etext))) {
- if (i % 4 == 0)
- printk("\n" KERN_EMERG " ");
- printk(" [<%08lx>]", addr);
- i++;
- }
+#ifdef CONFIG_FRAME_POINTER
+ printk(KERN_EMERG "Call Trace:\n");
+
+ last_stack = stack - 1;
+ while (stack <= endstack && stack > last_stack) {
+
+ addr = *(stack + 1);
+ printk(KERN_EMERG " [%08lx] ", addr);
+ print_symbol(KERN_CONT "%s\n", addr);
+
+ last_stack = stack;
+ stack = (unsigned long *)*stack;
}
printk("\n");
+#else
+ printk(KERN_EMERG "CONFIG_FRAME_POINTER disabled, no symbolic call trace\n");
+#endif
}
void bad_super_trap(struct frame *fp)
@@ -298,19 +290,47 @@
current->thread.esp0 = ssp;
}
-
/*
* The architecture-independent backtrace generator
*/
void dump_stack(void)
{
- unsigned long stack;
+ /*
+ * We need frame pointers for this little trick, which works as follows:
+ *
+ * +------------+ 0x00
+ * | Next SP | -> 0x0c
+ * +------------+ 0x04
+ * | Caller |
+ * +------------+ 0x08
+ * | Local vars | -> our stack var
+ * +------------+ 0x0c
+ * | Next SP | -> 0x18, that is what we pass to show_stack()
+ * +------------+ 0x10
+ * | Caller |
+ * +------------+ 0x14
+ * | Local vars |
+ * +------------+ 0x18
+ * | ... |
+ * +------------+
+ */
- show_stack(current, &stack);
+ unsigned long *stack;
+
+ stack = (unsigned long *)&stack;
+ stack++;
+ __show_stack(current, stack);
}
-
EXPORT_SYMBOL(dump_stack);
+void show_stack(struct task_struct *task, unsigned long *stack)
+{
+ if (!stack && !task)
+ dump_stack();
+ else
+ __show_stack(task, stack);
+}
+
#ifdef CONFIG_M68KFPU_EMU
asmlinkage void fpemu_signal(int signal, int code, void *addr)
{
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index b44edb08..93e69236 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -64,6 +64,7 @@
_stext = . ;
TEXT_TEXT
SCHED_TEXT
+ LOCK_TEXT
*(.text.lock)
. = ALIGN(16); /* Exception table */
@@ -73,6 +74,7 @@
*(.rodata) *(.rodata.*)
*(__vermagic) /* Kernel version magic */
+ *(__markers_strings)
*(.rodata1)
*(.rodata.str1.1)
@@ -112,6 +114,16 @@
*(__kcrctab_gpl)
__stop___kcrctab_gpl = .;
+ /* Kernel symbol table: Normal unused symbols */
+ __start___kcrctab_unused = .;
+ *(__kcrctab_unused)
+ __stop___kcrctab_unused = .;
+
+ /* Kernel symbol table: GPL-only unused symbols */
+ __start___kcrctab_unused_gpl = .;
+ *(__kcrctab_unused_gpl)
+ __stop___kcrctab_unused_gpl = .;
+
/* Kernel symbol table: GPL-future symbols */
__start___kcrctab_gpl_future = .;
*(__kcrctab_gpl_future)
@@ -182,6 +194,7 @@
*(COMMON)
. = ALIGN(4) ;
_ebss = . ;
+ _end = . ;
} > BSS
}
diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c
index a6692e9..d01a5d2 100644
--- a/arch/m68knommu/platform/5206e/config.c
+++ b/arch/m68knommu/platform/5206e/config.c
@@ -48,7 +48,7 @@
/***************************************************************************/
-static void __init m5206_uart_init_line(int line, int irq)
+static void __init m5206e_uart_init_line(int line, int irq)
{
if (line == 0) {
writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
diff --git a/arch/m68knommu/platform/5272/config.c b/arch/m68knommu/platform/5272/config.c
index 2aca599..230bae6 100644
--- a/arch/m68knommu/platform/5272/config.c
+++ b/arch/m68knommu/platform/5272/config.c
@@ -139,10 +139,6 @@
/* Copy command line from FLASH to local buffer... */
memcpy(commandp, (char *) 0xf0004000, size);
commandp[size-1] = 0;
-#elif defined(CONFIG_MTD_KeyTechnology)
- /* Copy command line from FLASH to local buffer... */
- memcpy(commandp, (char *) 0xffe06000, size);
- commandp[size-1] = 0;
#elif defined(CONFIG_CANCam)
/* Copy command line from FLASH to local buffer... */
memcpy(commandp, (char *) 0xf0010000, size);
diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c
index 036e1b7..dfdb5c2e 100644
--- a/arch/m68knommu/platform/528x/config.c
+++ b/arch/m68knommu/platform/528x/config.c
@@ -26,9 +26,240 @@
#include <asm/mcfuart.h>
#include <asm/mcfqspi.h>
+#ifdef CONFIG_MTD_PARTITIONS
+#include <linux/mtd/partitions.h>
+#endif
+
/***************************************************************************/
void coldfire_reset(void);
+static void coldfire_qspi_cs_control(u8 cs, u8 command);
+
+/***************************************************************************/
+
+#if defined(CONFIG_SPI)
+
+#if defined(CONFIG_WILDFIRE)
+#define SPI_NUM_CHIPSELECTS 0x02
+#define SPI_PAR_VAL 0x07 /* Enable DIN, DOUT, CLK */
+#define SPI_CS_MASK 0x18
+
+#define FLASH_BLOCKSIZE (1024*64)
+#define FLASH_NUMBLOCKS 16
+#define FLASH_TYPE "m25p80"
+
+#define M25P80_CS 0
+#define MMC_CS 1
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition stm25p_partitions[] = {
+ /* sflash */
+ [0] = {
+ .name = "stm25p80",
+ .offset = 0x00000000,
+ .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
+ .mask_flags = 0
+ }
+};
+
+#endif
+
+#elif defined(CONFIG_WILDFIREMOD)
+
+#define SPI_NUM_CHIPSELECTS 0x08
+#define SPI_PAR_VAL 0x07 /* Enable DIN, DOUT, CLK */
+#define SPI_CS_MASK 0x78
+
+#define FLASH_BLOCKSIZE (1024*64)
+#define FLASH_NUMBLOCKS 64
+#define FLASH_TYPE "m25p32"
+/* Reserve 1M for the kernel parition */
+#define FLASH_KERNEL_SIZE (1024 * 1024)
+
+#define M25P80_CS 5
+#define MMC_CS 6
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition stm25p_partitions[] = {
+ /* sflash */
+ [0] = {
+ .name = "kernel",
+ .offset = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
+ .size = FLASH_KERNEL_SIZE,
+ .mask_flags = 0
+ },
+ [1] = {
+ .name = "image",
+ .offset = 0x00000000,
+ .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
+ .mask_flags = 0
+ },
+ [2] = {
+ .name = "all",
+ .offset = 0x00000000,
+ .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
+ .mask_flags = 0
+ }
+};
+#endif
+
+#else
+#define SPI_NUM_CHIPSELECTS 0x04
+#define SPI_PAR_VAL 0x7F /* Enable DIN, DOUT, CLK, CS0 - CS4 */
+#endif
+
+#ifdef MMC_CS
+static struct coldfire_spi_chip flash_chip_info = {
+ .mode = SPI_MODE_0,
+ .bits_per_word = 16,
+ .del_cs_to_clk = 17,
+ .del_after_trans = 1,
+ .void_write_data = 0
+};
+
+static struct coldfire_spi_chip mmc_chip_info = {
+ .mode = SPI_MODE_0,
+ .bits_per_word = 16,
+ .del_cs_to_clk = 17,
+ .del_after_trans = 1,
+ .void_write_data = 0xFFFF
+};
+#endif
+
+#ifdef M25P80_CS
+static struct flash_platform_data stm25p80_platform_data = {
+ .name = "ST M25P80 SPI Flash chip",
+#ifdef CONFIG_MTD_PARTITIONS
+ .parts = stm25p_partitions,
+ .nr_parts = sizeof(stm25p_partitions) / sizeof(*stm25p_partitions),
+#endif
+ .type = FLASH_TYPE
+};
+#endif
+
+static struct spi_board_info spi_board_info[] __initdata = {
+#ifdef M25P80_CS
+ {
+ .modalias = "m25p80",
+ .max_speed_hz = 16000000,
+ .bus_num = 1,
+ .chip_select = M25P80_CS,
+ .platform_data = &stm25p80_platform_data,
+ .controller_data = &flash_chip_info
+ },
+#endif
+#ifdef MMC_CS
+ {
+ .modalias = "mmc_spi",
+ .max_speed_hz = 16000000,
+ .bus_num = 1,
+ .chip_select = MMC_CS,
+ .controller_data = &mmc_chip_info
+ }
+#endif
+};
+
+static struct coldfire_spi_master coldfire_master_info = {
+ .bus_num = 1,
+ .num_chipselect = SPI_NUM_CHIPSELECTS,
+ .irq_source = MCF5282_QSPI_IRQ_SOURCE,
+ .irq_vector = MCF5282_QSPI_IRQ_VECTOR,
+ .irq_mask = ((0x01 << MCF5282_QSPI_IRQ_SOURCE) | 0x01),
+ .irq_lp = 0x2B, /* Level 5 and Priority 3 */
+ .par_val = SPI_PAR_VAL,
+ .cs_control = coldfire_qspi_cs_control,
+};
+
+static struct resource coldfire_spi_resources[] = {
+ [0] = {
+ .name = "qspi-par",
+ .start = MCF5282_QSPI_PAR,
+ .end = MCF5282_QSPI_PAR,
+ .flags = IORESOURCE_MEM
+ },
+
+ [1] = {
+ .name = "qspi-module",
+ .start = MCF5282_QSPI_QMR,
+ .end = MCF5282_QSPI_QMR + 0x18,
+ .flags = IORESOURCE_MEM
+ },
+
+ [2] = {
+ .name = "qspi-int-level",
+ .start = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
+ .end = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
+ .flags = IORESOURCE_MEM
+ },
+
+ [3] = {
+ .name = "qspi-int-mask",
+ .start = MCF5282_INTC0 + MCFINTC_IMRL,
+ .end = MCF5282_INTC0 + MCFINTC_IMRL,
+ .flags = IORESOURCE_MEM
+ }
+};
+
+static struct platform_device coldfire_spi = {
+ .name = "spi_coldfire",
+ .id = -1,
+ .resource = coldfire_spi_resources,
+ .num_resources = ARRAY_SIZE(coldfire_spi_resources),
+ .dev = {
+ .platform_data = &coldfire_master_info,
+ }
+};
+
+static void coldfire_qspi_cs_control(u8 cs, u8 command)
+{
+ u8 cs_bit = ((0x01 << cs) << 3) & SPI_CS_MASK;
+
+#if defined(CONFIG_WILDFIRE)
+ u8 cs_mask = ~(((0x01 << cs) << 3) & SPI_CS_MASK);
+#endif
+#if defined(CONFIG_WILDFIREMOD)
+ u8 cs_mask = (cs << 3) & SPI_CS_MASK;
+#endif
+
+ /*
+ * Don't do anything if the chip select is not
+ * one of the port qs pins.
+ */
+ if (command & QSPI_CS_INIT) {
+#if defined(CONFIG_WILDFIRE)
+ MCF5282_GPIO_DDRQS |= cs_bit;
+ MCF5282_GPIO_PQSPAR &= ~cs_bit;
+#endif
+
+#if defined(CONFIG_WILDFIREMOD)
+ MCF5282_GPIO_DDRQS |= SPI_CS_MASK;
+ MCF5282_GPIO_PQSPAR &= ~SPI_CS_MASK;
+#endif
+ }
+
+ if (command & QSPI_CS_ASSERT) {
+ MCF5282_GPIO_PORTQS &= ~SPI_CS_MASK;
+ MCF5282_GPIO_PORTQS |= cs_mask;
+ } else if (command & QSPI_CS_DROP) {
+ MCF5282_GPIO_PORTQS |= SPI_CS_MASK;
+ }
+}
+
+static int __init spi_dev_init(void)
+{
+ int retval;
+
+ retval = platform_device_register(&coldfire_spi);
+ if (retval < 0)
+ return retval;
+
+ if (ARRAY_SIZE(spi_board_info))
+ retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+ return retval;
+}
+
+#endif /* CONFIG_SPI */
/***************************************************************************/
@@ -111,10 +342,43 @@
/***************************************************************************/
+#ifdef CONFIG_WILDFIRE
+void wildfire_halt(void)
+{
+ writeb(0, 0x30000007);
+ writeb(0x2, 0x30000007);
+}
+#endif
+
+#ifdef CONFIG_WILDFIREMOD
+void wildfiremod_halt(void)
+{
+ printk(KERN_INFO "WildFireMod hibernating...\n");
+
+ /* Set portE.5 to Digital IO */
+ MCF5282_GPIO_PEPAR &= ~(1 << (5 * 2));
+
+ /* Make portE.5 an output */
+ MCF5282_GPIO_DDRE |= (1 << 5);
+
+ /* Now toggle portE.5 from low to high */
+ MCF5282_GPIO_PORTE &= ~(1 << 5);
+ MCF5282_GPIO_PORTE |= (1 << 5);
+
+ printk(KERN_EMERG "Failed to hibernate. Halting!\n");
+}
+#endif
+
void __init config_BSP(char *commandp, int size)
{
mcf_disableall();
- mach_reset = coldfire_reset;
+
+#ifdef CONFIG_WILDFIRE
+ mach_halt = wildfire_halt;
+#endif
+#ifdef CONFIG_WILDFIREMOD
+ mach_halt = wildfiremod_halt;
+#endif
}
/***************************************************************************/
diff --git a/arch/m68knommu/platform/5307/config.c b/arch/m68knommu/platform/5307/config.c
index 92dc862..11cff66 100644
--- a/arch/m68knommu/platform/5307/config.c
+++ b/arch/m68knommu/platform/5307/config.c
@@ -124,8 +124,7 @@
mcf_setimr(MCFSIM_IMR_MASKALL);
#if defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
- defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3) || \
- defined(CONFIG_CLEOPATRA)
+ defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
/* Copy command line from FLASH to local buffer... */
memcpy(commandp, (char *) 0xf0004000, size);
commandp[size-1] = 0;
diff --git a/arch/m68knommu/platform/coldfire/entry.S b/arch/m68knommu/platform/coldfire/entry.S
index 111b66d..1e3c0dc 100644
--- a/arch/m68knommu/platform/coldfire/entry.S
+++ b/arch/m68knommu/platform/coldfire/entry.S
@@ -103,9 +103,26 @@
addql #4,%sp
ret_from_exception:
+ move #0x2700,%sr /* disable intrs */
btst #5,%sp@(PT_SR) /* check if returning to kernel */
jeq Luser_return /* if so, skip resched, signals */
+#ifdef CONFIG_PREEMPT
+ movel %sp,%d1 /* get thread_info pointer */
+ andl #-THREAD_SIZE,%d1 /* at base of kernel stack */
+ movel %d1,%a0
+ movel %a0@(TI_FLAGS),%d1 /* get thread_info->flags */
+ andl #_TIF_NEED_RESCHED,%d1
+ jeq Lkernel_return
+
+ movel %a0@(TI_PREEMPTCOUNT),%d1
+ cmpl #0,%d1
+ jne Lkernel_return
+
+ pea Lkernel_return
+ jmp preempt_schedule_irq /* preempt the kernel */
+#endif
+
Lkernel_return:
moveml %sp@,%d1-%d5/%a0-%a2
lea %sp@(32),%sp /* space for 8 regs */
@@ -140,6 +157,7 @@
Lwork_to_do:
movel %a0@(TI_FLAGS),%d1 /* get thread_info->flags */
+ move #0x2000,%sr /* enable intrs again */
btst #TIF_NEED_RESCHED,%d1
jne reschedule
diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile
index 90e2d7a..dd0e19d 100644
--- a/arch/mips/au1000/common/Makefile
+++ b/arch/mips/au1000/common/Makefile
@@ -1,9 +1,8 @@
#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
-# Makefile for the Alchemy Au1000 CPU, generic files.
+# Makefile for the Alchemy Au1xx0 CPUs, generic files.
#
obj-y += prom.o irq.o puts.o time.o reset.o \
diff --git a/arch/mips/au1000/common/au1xxx_irqmap.c b/arch/mips/au1000/common/au1xxx_irqmap.c
index 37a10a0..c7ca159 100644
--- a/arch/mips/au1000/common/au1xxx_irqmap.c
+++ b/arch/mips/au1000/common/au1xxx_irqmap.c
@@ -40,20 +40,20 @@
struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
#if defined(CONFIG_SOC_AU1000)
- { AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
@@ -62,32 +62,32 @@
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1500)
- { AU1500_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
- { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
@@ -100,26 +100,26 @@
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1500_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1500_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1500_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1100)
- { AU1100_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1100_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1100_SD_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1100_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
+ { AU1100_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1100_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1100_SD_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1100_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
@@ -128,33 +128,33 @@
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1100_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
- /*{ AU1000_GPIO215_208_INT, INTC_INT_HIGH_LEVEL, 0},*/
- { AU1100_LCD_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1100_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+ /* { AU1000_GPIO215_208_INT, INTC_INT_HIGH_LEVEL, 0 }, */
+ { AU1100_LCD_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1550)
- { AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
- { AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_RST_INT, INTC_INT_LOW_LEVEL, 0 },
- { AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
@@ -163,26 +163,26 @@
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0},
+ { AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
- { AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
#elif defined(CONFIG_SOC_AU1200)
- { AU1200_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1200_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_SWT_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_SD_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_DDMA_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1200_SD_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1200_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_MAE_BE_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1200_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_MAE_FE_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_PSC0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1200_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
@@ -191,10 +191,10 @@
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0},
+ { AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_MAE_BOTH_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1200_MAE_BOTH_INT, INTC_INT_HIGH_LEVEL, 0 },
#else
#error "Error: Unknown Alchemy SOC"
@@ -203,4 +203,3 @@
};
int __initdata au1xxx_ic0_nr_irqs = ARRAY_SIZE(au1xxx_ic0_map);
-
diff --git a/arch/mips/au1000/common/clocks.c b/arch/mips/au1000/common/clocks.c
index 3ce6cac..46f8ee0 100644
--- a/arch/mips/au1000/common/clocks.c
+++ b/arch/mips/au1000/common/clocks.c
@@ -1,10 +1,9 @@
/*
* BRIEF MODULE DESCRIPTION
- * Simple Au1000 clocks routines.
+ * Simple Au1xx0 clocks routines.
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -30,8 +29,8 @@
#include <linux/module.h>
#include <asm/mach-au1x00/au1000.h>
-static unsigned int au1x00_clock; // Hz
-static unsigned int lcd_clock; // KHz
+static unsigned int au1x00_clock; /* Hz */
+static unsigned int lcd_clock; /* KHz */
static unsigned long uart_baud_base;
/*
@@ -47,8 +46,6 @@
return au1x00_clock;
}
-
-
/*
* The UART baud base is not known at compile time ... if
* we want to be able to use the same code on different
@@ -73,24 +70,23 @@
void set_au1x00_lcd_clock(void)
{
unsigned int static_cfg0;
- unsigned int sys_busclk =
- (get_au1x00_speed()/1000) /
- ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2);
+ unsigned int sys_busclk = (get_au1x00_speed() / 1000) /
+ ((int)(au_readl(SYS_POWERCTRL) & 0x03) + 2);
static_cfg0 = au_readl(MEM_STCFG0);
- if (static_cfg0 & (1<<11))
+ if (static_cfg0 & (1 << 11))
lcd_clock = sys_busclk / 5; /* note: BCLK switching fails with D5 */
else
lcd_clock = sys_busclk / 4;
if (lcd_clock > 50000) /* Epson MAX */
- printk("warning: LCD clock too high (%d KHz)\n", lcd_clock);
+ printk(KERN_WARNING "warning: LCD clock too high (%u KHz)\n",
+ lcd_clock);
}
unsigned int get_au1x00_lcd_clock(void)
{
return lcd_clock;
}
-
EXPORT_SYMBOL(get_au1x00_lcd_clock);
diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/au1000/common/cputable.c
index 8c93a05..ba6430b 100644
--- a/arch/mips/au1000/common/cputable.c
+++ b/arch/mips/au1000/common/cputable.c
@@ -14,7 +14,7 @@
#include <asm/mach-au1x00/au1000.h>
-struct cpu_spec* cur_cpu_spec[NR_CPUS];
+struct cpu_spec *cur_cpu_spec[NR_CPUS];
/* With some thought, we can probably use the mask to reduce the
* size of the table.
@@ -39,8 +39,7 @@
{ 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 }
};
-void
-set_cpuspec(void)
+void set_cpuspec(void)
{
struct cpu_spec *sp;
u32 prid;
diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c
index 53377df..42d5552 100644
--- a/arch/mips/au1000/common/dbdma.c
+++ b/arch/mips/au1000/common/dbdma.c
@@ -53,12 +53,11 @@
*/
static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
-/* I couldn't find a macro that did this......
-*/
+/* I couldn't find a macro that did this... */
#define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1))
static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
-static int dbdma_initialized=0;
+static int dbdma_initialized;
static void au1xxx_dbdma_init(void);
static dbdev_tab_t dbdev_tab[] = {
@@ -149,7 +148,7 @@
{ DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
-#endif // CONFIG_SOC_AU1200
+#endif /* CONFIG_SOC_AU1200 */
{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
@@ -177,8 +176,7 @@
static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
-static dbdev_tab_t *
-find_dbdev_id(u32 id)
+static dbdev_tab_t *find_dbdev_id(u32 id)
{
int i;
dbdev_tab_t *p;
@@ -190,29 +188,27 @@
return NULL;
}
-void * au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp)
+void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp)
{
- return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+ return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
}
EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt);
-u32
-au1xxx_ddma_add_device(dbdev_tab_t *dev)
+u32 au1xxx_ddma_add_device(dbdev_tab_t *dev)
{
u32 ret = 0;
- dbdev_tab_t *p=NULL;
- static u16 new_id=0x1000;
+ dbdev_tab_t *p;
+ static u16 new_id = 0x1000;
p = find_dbdev_id(~0);
- if ( NULL != p )
- {
+ if (NULL != p) {
memcpy(p, dev, sizeof(dbdev_tab_t));
p->dev_id = DSCR_DEV2CUSTOM_ID(new_id, dev->dev_id);
ret = p->dev_id;
new_id++;
#if 0
- printk("add_device: id:%x flags:%x padd:%x\n",
- p->dev_id, p->dev_flags, p->dev_physaddr );
+ printk(KERN_DEBUG "add_device: id:%x flags:%x padd:%x\n",
+ p->dev_id, p->dev_flags, p->dev_physaddr);
#endif
}
@@ -220,10 +216,8 @@
}
EXPORT_SYMBOL(au1xxx_ddma_add_device);
-/* Allocate a channel and return a non-zero descriptor if successful.
-*/
-u32
-au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
+/* Allocate a channel and return a non-zero descriptor if successful. */
+u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
void (*callback)(int, void *), void *callparam)
{
unsigned long flags;
@@ -234,7 +228,8 @@
chan_tab_t *ctp;
au1x_dma_chan_t *cp;
- /* We do the intialization on the first channel allocation.
+ /*
+ * We do the intialization on the first channel allocation.
* We have to wait because of the interrupt handler initialization
* which can't be done successfully during board set up.
*/
@@ -242,16 +237,17 @@
au1xxx_dbdma_init();
dbdma_initialized = 1;
- if ((stp = find_dbdev_id(srcid)) == NULL)
+ stp = find_dbdev_id(srcid);
+ if (stp == NULL)
return 0;
- if ((dtp = find_dbdev_id(destid)) == NULL)
+ dtp = find_dbdev_id(destid);
+ if (dtp == NULL)
return 0;
used = 0;
rv = 0;
- /* Check to see if we can get both channels.
- */
+ /* Check to see if we can get both channels. */
spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
if (!(stp->dev_flags & DEV_FLAGS_INUSE) ||
(stp->dev_flags & DEV_FLAGS_ANYUSE)) {
@@ -261,35 +257,30 @@
(dtp->dev_flags & DEV_FLAGS_ANYUSE)) {
/* Got destination */
dtp->dev_flags |= DEV_FLAGS_INUSE;
- }
- else {
- /* Can't get dest. Release src.
- */
+ } else {
+ /* Can't get dest. Release src. */
stp->dev_flags &= ~DEV_FLAGS_INUSE;
used++;
}
- }
- else {
+ } else
used++;
- }
spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
if (!used) {
- /* Let's see if we can allocate a channel for it.
- */
+ /* Let's see if we can allocate a channel for it. */
ctp = NULL;
chan = 0;
spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
- for (i=0; i<NUM_DBDMA_CHANS; i++) {
+ for (i = 0; i < NUM_DBDMA_CHANS; i++)
if (chan_tab_ptr[i] == NULL) {
- /* If kmalloc fails, it is caught below same
+ /*
+ * If kmalloc fails, it is caught below same
* as a channel not available.
*/
ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC);
chan_tab_ptr[i] = ctp;
break;
}
- }
spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
if (ctp != NULL) {
@@ -304,8 +295,7 @@
ctp->chan_callback = callback;
ctp->chan_callparam = callparam;
- /* Initialize channel configuration.
- */
+ /* Initialize channel configuration. */
i = 0;
if (stp->dev_intlevel)
i |= DDMA_CFG_SED;
@@ -326,8 +316,7 @@
* operations.
*/
rv = (u32)(&chan_tab_ptr[chan]);
- }
- else {
+ } else {
/* Release devices */
stp->dev_flags &= ~DEV_FLAGS_INUSE;
dtp->dev_flags &= ~DEV_FLAGS_INUSE;
@@ -337,11 +326,11 @@
}
EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
-/* Set the device width if source or destination is a FIFO.
+/*
+ * Set the device width if source or destination is a FIFO.
* Should be 8, 16, or 32 bits.
*/
-u32
-au1xxx_dbdma_set_devwidth(u32 chanid, int bits)
+u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits)
{
u32 rv;
chan_tab_t *ctp;
@@ -365,10 +354,8 @@
}
EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth);
-/* Allocate a descriptor ring, initializing as much as possible.
-*/
-u32
-au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
+/* Allocate a descriptor ring, initializing as much as possible. */
+u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
{
int i;
u32 desc_base, srcid, destid;
@@ -378,43 +365,45 @@
dbdev_tab_t *stp, *dtp;
au1x_ddma_desc_t *dp;
- /* I guess we could check this to be within the
+ /*
+ * I guess we could check this to be within the
* range of the table......
*/
ctp = *((chan_tab_t **)chanid);
stp = ctp->chan_src;
dtp = ctp->chan_dest;
- /* The descriptors must be 32-byte aligned. There is a
+ /*
+ * The descriptors must be 32-byte aligned. There is a
* possibility the allocation will give us such an address,
* and if we try that first we are likely to not waste larger
* slabs of memory.
*/
desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t),
- GFP_KERNEL|GFP_DMA);
+ GFP_KERNEL|GFP_DMA);
if (desc_base == 0)
return 0;
if (desc_base & 0x1f) {
- /* Lost....do it again, allocate extra, and round
+ /*
+ * Lost....do it again, allocate extra, and round
* the address base.
*/
kfree((const void *)desc_base);
i = entries * sizeof(au1x_ddma_desc_t);
i += (sizeof(au1x_ddma_desc_t) - 1);
- if ((desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA)) == 0)
+ desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA);
+ if (desc_base == 0)
return 0;
desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
}
dp = (au1x_ddma_desc_t *)desc_base;
- /* Keep track of the base descriptor.
- */
+ /* Keep track of the base descriptor. */
ctp->chan_desc_base = dp;
- /* Initialize the rings with as much information as we know.
- */
+ /* Initialize the rings with as much information as we know. */
srcid = stp->dev_id;
destid = dtp->dev_id;
@@ -426,11 +415,12 @@
cmd0 |= DSCR_CMD0_IE | DSCR_CMD0_CV;
cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_NOCHANGE);
- /* is it mem to mem transfer? */
- if(((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) || (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) &&
- ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) || (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS))) {
- cmd0 |= DSCR_CMD0_MEM;
- }
+ /* Is it mem to mem transfer? */
+ if (((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) ||
+ (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) &&
+ ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) ||
+ (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS)))
+ cmd0 |= DSCR_CMD0_MEM;
switch (stp->dev_devwidth) {
case 8:
@@ -458,15 +448,17 @@
break;
}
- /* If the device is marked as an in/out FIFO, ensure it is
+ /*
+ * If the device is marked as an in/out FIFO, ensure it is
* set non-coherent.
*/
if (stp->dev_flags & DEV_FLAGS_IN)
- cmd0 |= DSCR_CMD0_SN; /* Source in fifo */
+ cmd0 |= DSCR_CMD0_SN; /* Source in FIFO */
if (dtp->dev_flags & DEV_FLAGS_OUT)
- cmd0 |= DSCR_CMD0_DN; /* Destination out fifo */
+ cmd0 |= DSCR_CMD0_DN; /* Destination out FIFO */
- /* Set up source1. For now, assume no stride and increment.
+ /*
+ * Set up source1. For now, assume no stride and increment.
* A channel attribute update can change this later.
*/
switch (stp->dev_tsize) {
@@ -485,19 +477,19 @@
break;
}
- /* If source input is fifo, set static address.
- */
+ /* If source input is FIFO, set static address. */
if (stp->dev_flags & DEV_FLAGS_IN) {
- if ( stp->dev_flags & DEV_FLAGS_BURSTABLE )
+ if (stp->dev_flags & DEV_FLAGS_BURSTABLE)
src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST);
else
- src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
-
+ src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
}
+
if (stp->dev_physaddr)
src0 = stp->dev_physaddr;
- /* Set up dest1. For now, assume no stride and increment.
+ /*
+ * Set up dest1. For now, assume no stride and increment.
* A channel attribute update can change this later.
*/
switch (dtp->dev_tsize) {
@@ -516,22 +508,24 @@
break;
}
- /* If destination output is fifo, set static address.
- */
+ /* If destination output is FIFO, set static address. */
if (dtp->dev_flags & DEV_FLAGS_OUT) {
- if ( dtp->dev_flags & DEV_FLAGS_BURSTABLE )
- dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
- else
- dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
+ if (dtp->dev_flags & DEV_FLAGS_BURSTABLE)
+ dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
+ else
+ dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
}
+
if (dtp->dev_physaddr)
dest0 = dtp->dev_physaddr;
#if 0
- printk("did:%x sid:%x cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
- dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, src1, dest0, dest1 );
+ printk(KERN_DEBUG "did:%x sid:%x cmd0:%x cmd1:%x source0:%x "
+ "source1:%x dest0:%x dest1:%x\n",
+ dtp->dev_id, stp->dev_id, cmd0, cmd1, src0,
+ src1, dest0, dest1);
#endif
- for (i=0; i<entries; i++) {
+ for (i = 0; i < entries; i++) {
dp->dscr_cmd0 = cmd0;
dp->dscr_cmd1 = cmd1;
dp->dscr_source0 = src0;
@@ -545,49 +539,49 @@
dp++;
}
- /* Make last descrptor point to the first.
- */
+ /* Make last descrptor point to the first. */
dp--;
dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(ctp->chan_desc_base));
ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
- return (u32)(ctp->chan_desc_base);
+ return (u32)ctp->chan_desc_base;
}
EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
-/* Put a source buffer into the DMA ring.
+/*
+ * Put a source buffer into the DMA ring.
* This updates the source pointer and byte count. Normally used
* for memory to fifo transfers.
*/
-u32
-_au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
+u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
- /* I guess we could check this to be within the
+ /*
+ * I guess we could check this to be within the
* range of the table......
*/
- ctp = *((chan_tab_t **)chanid);
+ ctp = *(chan_tab_t **)chanid;
- /* We should have multiple callers for a particular channel,
+ /*
+ * We should have multiple callers for a particular channel,
* an interrupt doesn't affect this pointer nor the descriptor,
* so no locking should be needed.
*/
dp = ctp->put_ptr;
- /* If the descriptor is valid, we are way ahead of the DMA
+ /*
+ * If the descriptor is valid, we are way ahead of the DMA
* engine, so just return an error condition.
*/
- if (dp->dscr_cmd0 & DSCR_CMD0_V) {
+ if (dp->dscr_cmd0 & DSCR_CMD0_V)
return 0;
- }
- /* Load up buffer address and byte count.
- */
+ /* Load up buffer address and byte count. */
dp->dscr_source0 = virt_to_phys(buf);
dp->dscr_cmd1 = nbytes;
- /* Check flags */
+ /* Check flags */
if (flags & DDMA_FLAGS_IE)
dp->dscr_cmd0 |= DSCR_CMD0_IE;
if (flags & DDMA_FLAGS_NOIE)
@@ -595,23 +589,21 @@
/*
* There is an errata on the Au1200/Au1550 parts that could result
- * in "stale" data being DMA'd. It has to do with the snoop logic on
- * the dache eviction buffer. NONCOHERENT_IO is on by default for
- * these parts. If it is fixedin the future, these dma_cache_inv will
+ * in "stale" data being DMA'ed. It has to do with the snoop logic on
+ * the cache eviction buffer. DMA_NONCOHERENT is on by default for
+ * these parts. If it is fixed in the future, these dma_cache_inv will
* just be nothing more than empty macros. See io.h.
- * */
+ */
dma_cache_wback_inv((unsigned long)buf, nbytes);
- dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
+ dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
au_sync();
dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
- ctp->chan_ptr->ddma_dbell = 0;
+ ctp->chan_ptr->ddma_dbell = 0;
- /* Get next descriptor pointer.
- */
+ /* Get next descriptor pointer. */
ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
- /* return something not zero.
- */
+ /* Return something non-zero. */
return nbytes;
}
EXPORT_SYMBOL(_au1xxx_dbdma_put_source);
@@ -654,81 +646,77 @@
dp->dscr_dest0 = virt_to_phys(buf);
dp->dscr_cmd1 = nbytes;
#if 0
- printk("cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
- dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
- dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1 );
+ printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
+ dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
+ dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
#endif
/*
* There is an errata on the Au1200/Au1550 parts that could result in
- * "stale" data being DMA'd. It has to do with the snoop logic on the
- * dache eviction buffer. NONCOHERENT_IO is on by default for these
- * parts. If it is fixedin the future, these dma_cache_inv will just
+ * "stale" data being DMA'ed. It has to do with the snoop logic on the
+ * cache eviction buffer. DMA_NONCOHERENT is on by default for these
+ * parts. If it is fixed in the future, these dma_cache_inv will just
* be nothing more than empty macros. See io.h.
- * */
+ */
dma_cache_inv((unsigned long)buf, nbytes);
dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
au_sync();
dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
- ctp->chan_ptr->ddma_dbell = 0;
+ ctp->chan_ptr->ddma_dbell = 0;
- /* Get next descriptor pointer.
- */
+ /* Get next descriptor pointer. */
ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
- /* return something not zero.
- */
+ /* Return something non-zero. */
return nbytes;
}
EXPORT_SYMBOL(_au1xxx_dbdma_put_dest);
-/* Get a destination buffer into the DMA ring.
+/*
+ * Get a destination buffer into the DMA ring.
* Normally used to get a full buffer from the ring during fifo
* to memory transfers. This does not set the valid bit, you will
* have to put another destination buffer to keep the DMA going.
*/
-u32
-au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes)
+u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
u32 rv;
- /* I guess we could check this to be within the
+ /*
+ * I guess we could check this to be within the
* range of the table......
*/
ctp = *((chan_tab_t **)chanid);
- /* We should have multiple callers for a particular channel,
+ /*
+ * We should have multiple callers for a particular channel,
* an interrupt doesn't affect this pointer nor the descriptor,
* so no locking should be needed.
*/
dp = ctp->get_ptr;
- /* If the descriptor is valid, we are way ahead of the DMA
+ /*
+ * If the descriptor is valid, we are way ahead of the DMA
* engine, so just return an error condition.
*/
if (dp->dscr_cmd0 & DSCR_CMD0_V)
return 0;
- /* Return buffer address and byte count.
- */
+ /* Return buffer address and byte count. */
*buf = (void *)(phys_to_virt(dp->dscr_dest0));
*nbytes = dp->dscr_cmd1;
rv = dp->dscr_stat;
- /* Get next descriptor pointer.
- */
+ /* Get next descriptor pointer. */
ctp->get_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
- /* return something not zero.
- */
+ /* Return something non-zero. */
return rv;
}
-
EXPORT_SYMBOL_GPL(au1xxx_dbdma_get_dest);
-void
-au1xxx_dbdma_stop(u32 chanid)
+void au1xxx_dbdma_stop(u32 chanid)
{
chan_tab_t *ctp;
au1x_dma_chan_t *cp;
@@ -743,7 +731,7 @@
udelay(1);
halt_timeout++;
if (halt_timeout > 100) {
- printk("warning: DMA channel won't halt\n");
+ printk(KERN_WARNING "warning: DMA channel won't halt\n");
break;
}
}
@@ -753,12 +741,12 @@
}
EXPORT_SYMBOL(au1xxx_dbdma_stop);
-/* Start using the current descriptor pointer. If the dbdma encounters
- * a not valid descriptor, it will stop. In this case, we can just
+/*
+ * Start using the current descriptor pointer. If the DBDMA encounters
+ * a non-valid descriptor, it will stop. In this case, we can just
* continue by adding a buffer to the list and starting again.
*/
-void
-au1xxx_dbdma_start(u32 chanid)
+void au1xxx_dbdma_start(u32 chanid)
{
chan_tab_t *ctp;
au1x_dma_chan_t *cp;
@@ -773,8 +761,7 @@
}
EXPORT_SYMBOL(au1xxx_dbdma_start);
-void
-au1xxx_dbdma_reset(u32 chanid)
+void au1xxx_dbdma_reset(u32 chanid)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
@@ -784,14 +771,14 @@
ctp = *((chan_tab_t **)chanid);
ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
- /* Run through the descriptors and reset the valid indicator.
- */
+ /* Run through the descriptors and reset the valid indicator. */
dp = ctp->chan_desc_base;
do {
dp->dscr_cmd0 &= ~DSCR_CMD0_V;
- /* reset our SW status -- this is used to determine
- * if a descriptor is in use by upper level SW. Since
+ /*
+ * Reset our software status -- this is used to determine
+ * if a descriptor is in use by upper level software. Since
* posting can reset 'V' bit.
*/
dp->sw_status = 0;
@@ -800,8 +787,7 @@
}
EXPORT_SYMBOL(au1xxx_dbdma_reset);
-u32
-au1xxx_get_dma_residue(u32 chanid)
+u32 au1xxx_get_dma_residue(u32 chanid)
{
chan_tab_t *ctp;
au1x_dma_chan_t *cp;
@@ -810,18 +796,15 @@
ctp = *((chan_tab_t **)chanid);
cp = ctp->chan_ptr;
- /* This is only valid if the channel is stopped.
- */
+ /* This is only valid if the channel is stopped. */
rv = cp->ddma_bytecnt;
au_sync();
return rv;
}
-
EXPORT_SYMBOL_GPL(au1xxx_get_dma_residue);
-void
-au1xxx_dbdma_chan_free(u32 chanid)
+void au1xxx_dbdma_chan_free(u32 chanid)
{
chan_tab_t *ctp;
dbdev_tab_t *stp, *dtp;
@@ -842,8 +825,7 @@
}
EXPORT_SYMBOL(au1xxx_dbdma_chan_free);
-static irqreturn_t
-dbdma_interrupt(int irq, void *dev_id)
+static irqreturn_t dbdma_interrupt(int irq, void *dev_id)
{
u32 intstat;
u32 chan_index;
@@ -859,13 +841,12 @@
cp = ctp->chan_ptr;
dp = ctp->cur_ptr;
- /* Reset interrupt.
- */
+ /* Reset interrupt. */
cp->ddma_irq = 0;
au_sync();
if (ctp->chan_callback)
- (ctp->chan_callback)(irq, ctp->chan_callparam);
+ ctp->chan_callback(irq, ctp->chan_callparam);
ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
return IRQ_RETVAL(1);
@@ -890,47 +871,47 @@
if (request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
"Au1xxx dbdma", (void *)dbdma_gptr))
- printk("Can't get 1550 dbdma irq");
+ printk(KERN_ERR "Can't get 1550 dbdma irq");
}
-void
-au1xxx_dbdma_dump(u32 chanid)
+void au1xxx_dbdma_dump(u32 chanid)
{
- chan_tab_t *ctp;
- au1x_ddma_desc_t *dp;
- dbdev_tab_t *stp, *dtp;
- au1x_dma_chan_t *cp;
- u32 i = 0;
+ chan_tab_t *ctp;
+ au1x_ddma_desc_t *dp;
+ dbdev_tab_t *stp, *dtp;
+ au1x_dma_chan_t *cp;
+ u32 i = 0;
ctp = *((chan_tab_t **)chanid);
stp = ctp->chan_src;
dtp = ctp->chan_dest;
cp = ctp->chan_ptr;
- printk("Chan %x, stp %x (dev %d) dtp %x (dev %d) \n",
- (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp, dtp - dbdev_tab);
- printk("desc base %x, get %x, put %x, cur %x\n",
- (u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr),
- (u32)(ctp->put_ptr), (u32)(ctp->cur_ptr));
+ printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d) \n",
+ (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp,
+ dtp - dbdev_tab);
+ printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n",
+ (u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr),
+ (u32)(ctp->put_ptr), (u32)(ctp->cur_ptr));
- printk("dbdma chan %x\n", (u32)cp);
- printk("cfg %08x, desptr %08x, statptr %08x\n",
- cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr);
- printk("dbell %08x, irq %08x, stat %08x, bytecnt %08x\n",
- cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat, cp->ddma_bytecnt);
+ printk(KERN_DEBUG "dbdma chan %x\n", (u32)cp);
+ printk(KERN_DEBUG "cfg %08x, desptr %08x, statptr %08x\n",
+ cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr);
+ printk(KERN_DEBUG "dbell %08x, irq %08x, stat %08x, bytecnt %08x\n",
+ cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat,
+ cp->ddma_bytecnt);
-
- /* Run through the descriptors
- */
+ /* Run through the descriptors */
dp = ctp->chan_desc_base;
do {
- printk("Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
- i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
- printk("src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
- dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
- printk("stat %08x, nxtptr %08x\n",
- dp->dscr_stat, dp->dscr_nxtptr);
+ printk(KERN_DEBUG "Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
+ i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
+ printk(KERN_DEBUG "src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
+ dp->dscr_source0, dp->dscr_source1,
+ dp->dscr_dest0, dp->dscr_dest1);
+ printk(KERN_DEBUG "stat %08x, nxtptr %08x\n",
+ dp->dscr_stat, dp->dscr_nxtptr);
dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
} while (dp != ctp->chan_desc_base);
}
@@ -938,32 +919,33 @@
/* Put a descriptor into the DMA ring.
* This updates the source/destination pointers and byte count.
*/
-u32
-au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr )
+u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
- u32 nbytes=0;
+ u32 nbytes = 0;
- /* I guess we could check this to be within the
- * range of the table......
- */
+ /*
+ * I guess we could check this to be within the
+ * range of the table......
+ */
ctp = *((chan_tab_t **)chanid);
- /* We should have multiple callers for a particular channel,
- * an interrupt doesn't affect this pointer nor the descriptor,
- * so no locking should be needed.
- */
+ /*
+ * We should have multiple callers for a particular channel,
+ * an interrupt doesn't affect this pointer nor the descriptor,
+ * so no locking should be needed.
+ */
dp = ctp->put_ptr;
- /* If the descriptor is valid, we are way ahead of the DMA
- * engine, so just return an error condition.
- */
+ /*
+ * If the descriptor is valid, we are way ahead of the DMA
+ * engine, so just return an error condition.
+ */
if (dp->dscr_cmd0 & DSCR_CMD0_V)
return 0;
- /* Load up buffer addresses and byte count.
- */
+ /* Load up buffer addresses and byte count. */
dp->dscr_dest0 = dscr->dscr_dest0;
dp->dscr_source0 = dscr->dscr_source0;
dp->dscr_dest1 = dscr->dscr_dest1;
@@ -975,14 +957,11 @@
dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
ctp->chan_ptr->ddma_dbell = 0;
- /* Get next descriptor pointer.
- */
+ /* Get next descriptor pointer. */
ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
- /* return something not zero.
- */
+ /* Return something non-zero. */
return nbytes;
}
#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
-
diff --git a/arch/mips/au1000/common/dbg_io.c b/arch/mips/au1000/common/dbg_io.c
index eae1bb2..af5be7d 100644
--- a/arch/mips/au1000/common/dbg_io.c
+++ b/arch/mips/au1000/common/dbg_io.c
@@ -1,3 +1,4 @@
+#include <linux/types.h>
#include <asm/mach-au1x00/au1000.h>
@@ -8,12 +9,6 @@
* uart to be used for debugging.
*/
#define DEBUG_BASE UART_DEBUG_BASE
-/**/
-
-/* we need uint32 uint8 */
-/* #include "types.h" */
-typedef unsigned char uint8;
-typedef unsigned int uint32;
#define UART16550_BAUD_2400 2400
#define UART16550_BAUD_4800 4800
@@ -51,17 +46,15 @@
#define UART_MOD_CNTRL 0x100 /* Module Control */
/* memory-mapped read/write of the port */
-#define UART16550_READ(y) (au_readl(DEBUG_BASE + y) & 0xff)
-#define UART16550_WRITE(y, z) (au_writel(z&0xff, DEBUG_BASE + y))
+#define UART16550_READ(y) (au_readl(DEBUG_BASE + y) & 0xff)
+#define UART16550_WRITE(y, z) (au_writel(z & 0xff, DEBUG_BASE + y))
extern unsigned long calc_clock(void);
-void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
+void debugInit(u32 baud, u8 data, u8 parity, u8 stop)
{
-
- if (UART16550_READ(UART_MOD_CNTRL) != 0x3) {
+ if (UART16550_READ(UART_MOD_CNTRL) != 0x3)
UART16550_WRITE(UART_MOD_CNTRL, 3);
- }
calc_clock();
/* disable interrupts */
@@ -69,7 +62,7 @@
/* set up baud rate */
{
- uint32 divisor;
+ u32 divisor;
/* set divisor */
divisor = get_au1x00_uart_baud_base() / baud;
@@ -80,9 +73,9 @@
UART16550_WRITE(UART_LCR, (data | parity | stop));
}
-static int remoteDebugInitialized = 0;
+static int remoteDebugInitialized;
-uint8 getDebugChar(void)
+u8 getDebugChar(void)
{
if (!remoteDebugInitialized) {
remoteDebugInitialized = 1;
@@ -92,15 +85,13 @@
UART16550_STOP_1BIT);
}
- while((UART16550_READ(UART_LSR) & 0x1) == 0);
+ while ((UART16550_READ(UART_LSR) & 0x1) == 0);
return UART16550_READ(UART_RX);
}
-int putDebugChar(uint8 byte)
+int putDebugChar(u8 byte)
{
-// int i;
-
if (!remoteDebugInitialized) {
remoteDebugInitialized = 1;
debugInit(UART16550_BAUD_115200,
@@ -109,9 +100,8 @@
UART16550_STOP_1BIT);
}
- while ((UART16550_READ(UART_LSR)&0x40) == 0);
+ while ((UART16550_READ(UART_LSR) & 0x40) == 0);
UART16550_WRITE(UART_TX, byte);
- //for (i=0;i<0xfff;i++);
return 1;
}
diff --git a/arch/mips/au1000/common/dma.c b/arch/mips/au1000/common/dma.c
index 95f69ea..d6fbda2 100644
--- a/arch/mips/au1000/common/dma.c
+++ b/arch/mips/au1000/common/dma.c
@@ -1,12 +1,11 @@
/*
*
* BRIEF MODULE DESCRIPTION
- * A DMA channel allocator for Au1000. API is modeled loosely off of
+ * A DMA channel allocator for Au1x00. API is modeled loosely off of
* linux/kernel/dma.c.
*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * stevel@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
* Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can redistribute it and/or modify it
@@ -39,7 +38,8 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1000_dma.h>
-#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1100)
+#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \
+ defined(CONFIG_SOC_AU1100)
/*
* A note on resource allocation:
*
@@ -56,7 +56,6 @@
* returned from request_dma.
*/
-
DEFINE_SPINLOCK(au1000_dma_spin_lock);
struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = {
@@ -71,7 +70,7 @@
};
EXPORT_SYMBOL(au1000_dma_table);
-// Device FIFO addresses and default DMA modes
+/* Device FIFO addresses and default DMA modes */
static const struct dma_dev {
unsigned int fifo_addr;
unsigned int dma_mode;
@@ -80,8 +79,8 @@
{UART0_ADDR + UART_RX, 0},
{0, 0},
{0, 0},
- {AC97C_DATA, DMA_DW16 }, // coherent
- {AC97C_DATA, DMA_DR | DMA_DW16 }, // coherent
+ {AC97C_DATA, DMA_DW16 }, /* coherent */
+ {AC97C_DATA, DMA_DR | DMA_DW16 }, /* coherent */
{UART3_ADDR + UART_TX, DMA_DW8 | DMA_NC},
{UART3_ADDR + UART_RX, DMA_DR | DMA_DW8 | DMA_NC},
{USBD_EP0RD, DMA_DR | DMA_DW8 | DMA_NC},
@@ -101,10 +100,10 @@
struct dma_chan *chan;
for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) {
- if ((chan = get_dma_chan(i)) != NULL) {
+ chan = get_dma_chan(i);
+ if (chan != NULL)
len += sprintf(buf + len, "%2d: %s\n",
i, chan->dev_str);
- }
}
if (fpos >= len) {
@@ -113,18 +112,19 @@
return 0;
}
*start = buf + fpos;
- if ((len -= fpos) > length)
+ len -= fpos;
+ if (len > length)
return length;
*eof = 1;
return len;
}
-// Device FIFO addresses and default DMA modes - 2nd bank
+/* Device FIFO addresses and default DMA modes - 2nd bank */
static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = {
- {SD0_XMIT_FIFO, DMA_DS | DMA_DW8}, // coherent
- {SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8}, // coherent
- {SD1_XMIT_FIFO, DMA_DS | DMA_DW8}, // coherent
- {SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8} // coherent
+ { SD0_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */
+ { SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 }, /* coherent */
+ { SD1_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */
+ { SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 } /* coherent */
};
void dump_au1000_dma_channel(unsigned int dmanr)
@@ -150,7 +150,6 @@
au_readl(chan->io + DMA_BUFFER1_COUNT));
}
-
/*
* Finds a free channel, and binds the requested device to it.
* Returns the allocated channel number, or negative on error.
@@ -169,14 +168,14 @@
if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2))
return -EINVAL;
#else
- if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
+ if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
return -EINVAL;
#endif
- for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) {
+ for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
if (au1000_dma_table[i].dev_id < 0)
break;
- }
+
if (i == NUM_AU1000_DMA_CHANNELS)
return -ENODEV;
@@ -185,15 +184,15 @@
if (dev_id >= DMA_NUM_DEV) {
dev_id -= DMA_NUM_DEV;
dev = &dma_dev_table_bank2[dev_id];
- } else {
+ } else
dev = &dma_dev_table[dev_id];
- }
if (irqhandler) {
chan->irq = AU1000_DMA_INT_BASE + i;
chan->irq_dev = irq_dev_id;
- if ((ret = request_irq(chan->irq, irqhandler, irqflags,
- dev_str, chan->irq_dev))) {
+ ret = request_irq(chan->irq, irqhandler, irqflags, dev_str,
+ chan->irq_dev);
+ if (ret) {
chan->irq = 0;
chan->irq_dev = NULL;
return ret;
@@ -203,7 +202,7 @@
chan->irq_dev = NULL;
}
- // fill it in
+ /* fill it in */
chan->io = DMA_CHANNEL_BASE + i * DMA_CHANNEL_LEN;
chan->dev_id = dev_id;
chan->dev_str = dev_str;
@@ -220,8 +219,9 @@
void free_au1000_dma(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan) {
- printk("Trying to free DMA%d\n", dmanr);
+ printk(KERN_ERR "Error trying to free DMA%d\n", dmanr);
return;
}
@@ -235,4 +235,4 @@
}
EXPORT_SYMBOL(free_au1000_dma);
-#endif // AU1000 AU1500 AU1100
+#endif /* AU1000 AU1500 AU1100 */
diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c
index 5254525..b485d94 100644
--- a/arch/mips/au1000/common/gpio.c
+++ b/arch/mips/au1000/common/gpio.c
@@ -69,7 +69,7 @@
static int au1xxx_gpio1_read(unsigned gpio)
{
- return ((gpio1->pinstaterd >> gpio) & 0x01);
+ return (gpio1->pinstaterd >> gpio) & 0x01;
}
static void au1xxx_gpio1_write(unsigned gpio, int value)
@@ -104,7 +104,6 @@
else
return au1xxx_gpio1_read(gpio);
}
-
EXPORT_SYMBOL(au1xxx_gpio_get_value);
void au1xxx_gpio_set_value(unsigned gpio, int value)
@@ -118,7 +117,6 @@
else
au1xxx_gpio1_write(gpio, value);
}
-
EXPORT_SYMBOL(au1xxx_gpio_set_value);
int au1xxx_gpio_direction_input(unsigned gpio)
@@ -132,7 +130,6 @@
return au1xxx_gpio1_direction_input(gpio);
}
-
EXPORT_SYMBOL(au1xxx_gpio_direction_input);
int au1xxx_gpio_direction_output(unsigned gpio, int value)
@@ -146,5 +143,4 @@
return au1xxx_gpio1_direction_output(gpio, value);
}
-
EXPORT_SYMBOL(au1xxx_gpio_direction_output);
diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c
index f062699..40c6cec 100644
--- a/arch/mips/au1000/common/irq.c
+++ b/arch/mips/au1000/common/irq.c
@@ -210,10 +210,8 @@
au_sync();
}
-
static inline void mask_and_ack_level_irq(unsigned int irq_nr)
{
-
local_disable_irq(irq_nr);
au_sync();
#if defined(CONFIG_MIPS_PB1000)
@@ -263,14 +261,14 @@
unsigned long flags, new_mask;
spin_lock_irqsave(&irq_lock, flags);
- for (i = 0; i < 32; i++) {
+ for (i = 0; i < 32; i++)
if (mask & (1 << i)) {
if (controller)
local_enable_irq(i + 32);
else
local_enable_irq(i);
}
- }
+
if (controller)
new_mask = au_readl(IC1_MASKSET);
else
diff --git a/arch/mips/au1000/common/pci.c b/arch/mips/au1000/common/pci.c
index 7e966b3..7866cf5 100644
--- a/arch/mips/au1000/common/pci.c
+++ b/arch/mips/au1000/common/pci.c
@@ -2,9 +2,8 @@
* BRIEF MODULE DESCRIPTION
* Alchemy/AMD Au1x00 PCI support.
*
- * Copyright 2001-2003, 2007 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001-2003, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
*
@@ -86,9 +85,9 @@
u32 prid = read_c0_prid();
if ((prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) {
- au_writel((1 << 16) | au_readl(Au1500_PCI_CFG),
- Au1500_PCI_CFG);
- printk("Non-coherent PCI accesses enabled\n");
+ au_writel((1 << 16) | au_readl(Au1500_PCI_CFG),
+ Au1500_PCI_CFG);
+ printk(KERN_INFO "Non-coherent PCI accesses enabled\n");
}
}
#endif
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c
index 31d2a22..8cae7753 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/au1000/common/platform.c
@@ -269,8 +269,8 @@
#ifdef SMBUS_PSC_BASE
static struct resource pbdb_smbus_resources[] = {
{
- .start = SMBUS_PSC_BASE,
- .end = SMBUS_PSC_BASE + 0x24 - 1,
+ .start = CPHYSADDR(SMBUS_PSC_BASE),
+ .end = CPHYSADDR(SMBUS_PSC_BASE + 0xfffff),
.flags = IORESOURCE_MEM,
},
};
@@ -302,16 +302,17 @@
#endif
};
-int __init au1xxx_platform_init(void)
+static int __init au1xxx_platform_init(void)
{
unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
int i;
/* Fill up uartclk. */
- for (i = 0; au1x00_uart_data[i].flags ; i++)
+ for (i = 0; au1x00_uart_data[i].flags; i++)
au1x00_uart_data[i].uartclk = uartclk;
- return platform_add_devices(au1xxx_platform_devices, ARRAY_SIZE(au1xxx_platform_devices));
+ return platform_add_devices(au1xxx_platform_devices,
+ ARRAY_SIZE(au1xxx_platform_devices));
}
arch_initcall(au1xxx_platform_init);
diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c
index a8cd2c1..2166b9e 100644
--- a/arch/mips/au1000/common/power.c
+++ b/arch/mips/au1000/common/power.c
@@ -1,10 +1,9 @@
/*
* BRIEF MODULE DESCRIPTION
- * Au1000 Power Management routines.
+ * Au1xx0 Power Management routines.
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* Some of the routines are right out of init/main.c, whose
* copyrights apply here.
@@ -43,10 +42,10 @@
#ifdef CONFIG_PM
#define DEBUG 1
-#ifdef DEBUG
-# define DPRINTK(fmt, args...) printk("%s: " fmt, __func__, ## args)
+#ifdef DEBUG
+#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__, ## args)
#else
-# define DPRINTK(fmt, args...)
+#define DPRINTK(fmt, args...)
#endif
static void au1000_calibrate_delay(void);
@@ -57,7 +56,8 @@
static DEFINE_SPINLOCK(pm_lock);
-/* We need to save/restore a bunch of core registers that are
+/*
+ * We need to save/restore a bunch of core registers that are
* either volatile or reset to some state across a processor sleep.
* If reading a register doesn't provide a proper result for a
* later restore, we have to provide a function for loading that
@@ -78,24 +78,25 @@
static unsigned int sleep_usbdev_enable;
static unsigned int sleep_static_memctlr[4][3];
-/* Define this to cause the value you write to /proc/sys/pm/sleep to
+/*
+ * Define this to cause the value you write to /proc/sys/pm/sleep to
* set the TOY timer for the amount of time you want to sleep.
* This is done mainly for testing, but may be useful in other cases.
* The value is number of 32KHz ticks to sleep.
*/
#define SLEEP_TEST_TIMEOUT 1
-#ifdef SLEEP_TEST_TIMEOUT
-static int sleep_ticks;
+#ifdef SLEEP_TEST_TIMEOUT
+static int sleep_ticks;
void wakeup_counter0_set(int ticks);
#endif
-static void
-save_core_regs(void)
+static void save_core_regs(void)
{
extern void save_au1xxx_intctl(void);
extern void pm_eth0_shutdown(void);
- /* Do the serial ports.....these really should be a pm_*
+ /*
+ * Do the serial ports.....these really should be a pm_*
* registered function by the driver......but of course the
* standard serial driver doesn't understand our Au1xxx
* unique registers.
@@ -106,27 +107,24 @@
sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK);
sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL);
- /* Shutdown USB host/device.
- */
+ /* Shutdown USB host/device. */
sleep_usbhost_enable = au_readl(USB_HOST_CONFIG);
- /* There appears to be some undocumented reset register....
- */
+ /* There appears to be some undocumented reset register.... */
au_writel(0, 0xb0100004); au_sync();
au_writel(0, USB_HOST_CONFIG); au_sync();
sleep_usbdev_enable = au_readl(USBD_ENABLE);
au_writel(0, USBD_ENABLE); au_sync();
- /* Save interrupt controller state.
- */
+ /* Save interrupt controller state. */
save_au1xxx_intctl();
- /* Clocks and PLLs.
- */
+ /* Clocks and PLLs. */
sleep_aux_pll_cntrl = au_readl(SYS_AUXPLL);
- /* We don't really need to do this one, but unless we
+ /*
+ * We don't really need to do this one, but unless we
* write it again it won't have a valid value if we
* happen to read it.
*/
@@ -134,8 +132,7 @@
sleep_pin_function = au_readl(SYS_PINFUNC);
- /* Save the static memory controller configuration.
- */
+ /* Save the static memory controller configuration. */
sleep_static_memctlr[0][0] = au_readl(MEM_STCFG0);
sleep_static_memctlr[0][1] = au_readl(MEM_STTIME0);
sleep_static_memctlr[0][2] = au_readl(MEM_STADDR0);
@@ -150,8 +147,7 @@
sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3);
}
-static void
-restore_core_regs(void)
+static void restore_core_regs(void)
{
extern void restore_au1xxx_intctl(void);
extern void wakeup_counter0_adjust(void);
@@ -160,8 +156,7 @@
au_writel(sleep_cpu_pll_cntrl, SYS_CPUPLL); au_sync();
au_writel(sleep_pin_function, SYS_PINFUNC); au_sync();
- /* Restore the static memory controller configuration.
- */
+ /* Restore the static memory controller configuration. */
au_writel(sleep_static_memctlr[0][0], MEM_STCFG0);
au_writel(sleep_static_memctlr[0][1], MEM_STTIME0);
au_writel(sleep_static_memctlr[0][2], MEM_STADDR0);
@@ -175,7 +170,8 @@
au_writel(sleep_static_memctlr[3][1], MEM_STTIME3);
au_writel(sleep_static_memctlr[3][2], MEM_STADDR3);
- /* Enable the UART if it was enabled before sleep.
+ /*
+ * Enable the UART if it was enabled before sleep.
* I guess I should define module control bits........
*/
if (sleep_uart0_enable & 0x02) {
@@ -202,7 +198,7 @@
int au_sleep(void)
{
unsigned long wakeup, flags;
- extern void save_and_sleep(void);
+ extern void save_and_sleep(void);
spin_lock_irqsave(&pm_lock, flags);
@@ -210,23 +206,22 @@
flush_cache_all();
- /** The code below is all system dependent and we should probably
+ /**
+ ** The code below is all system dependent and we should probably
** have a function call out of here to set this up. You need
** to configure the GPIO or timer interrupts that will bring
** you out of sleep.
** For testing, the TOY counter wakeup is useful.
**/
-
#if 0
au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD);
- /* gpio 6 can cause a wake up event */
+ /* GPIO 6 can cause a wake up event */
wakeup = au_readl(SYS_WAKEMSK);
wakeup &= ~(1 << 8); /* turn off match20 wakeup */
- wakeup |= 1 << 6; /* turn on gpio 6 wakeup */
+ wakeup |= 1 << 6; /* turn on GPIO 6 wakeup */
#else
- /* For testing, allow match20 to wake us up.
- */
+ /* For testing, allow match20 to wake us up. */
#ifdef SLEEP_TEST_TIMEOUT
wakeup_counter0_set(sleep_ticks);
#endif
@@ -240,7 +235,8 @@
save_and_sleep();
- /* after a wakeup, the cpu vectors back to 0x1fc00000 so
+ /*
+ * After a wakeup, the cpu vectors back to 0x1fc00000, so
* it's up to the boot code to get us back here.
*/
restore_core_regs();
@@ -248,24 +244,22 @@
return 0;
}
-static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
- void __user *buffer, size_t * len, loff_t *ppos)
+static int pm_do_sleep(ctl_table *ctl, int write, struct file *file,
+ void __user *buffer, size_t *len, loff_t *ppos)
{
#ifdef SLEEP_TEST_TIMEOUT
#define TMPBUFLEN2 16
char buf[TMPBUFLEN2], *p;
#endif
- if (!write) {
+ if (!write)
*len = 0;
- } else {
+ else {
#ifdef SLEEP_TEST_TIMEOUT
- if (*len > TMPBUFLEN2 - 1) {
+ if (*len > TMPBUFLEN2 - 1)
return -EFAULT;
- }
- if (copy_from_user(buf, buffer, *len)) {
+ if (copy_from_user(buf, buffer, *len))
return -EFAULT;
- }
buf[*len] = 0;
p = buf;
sleep_ticks = simple_strtoul(p, &p, 0);
@@ -276,8 +270,8 @@
return 0;
}
-static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
- void __user *buffer, size_t * len, loff_t *ppos)
+static int pm_do_freq(ctl_table *ctl, int write, struct file *file,
+ void __user *buffer, size_t *len, loff_t *ppos)
{
int retval = 0, i;
unsigned long val, pll;
@@ -285,14 +279,14 @@
#define MAX_CPU_FREQ 396
char buf[TMPBUFLEN], *p;
unsigned long flags, intc0_mask, intc1_mask;
- unsigned long old_baud_base, old_cpu_freq, baud_rate, old_clk,
- old_refresh;
+ unsigned long old_baud_base, old_cpu_freq, old_clk, old_refresh;
unsigned long new_baud_base, new_cpu_freq, new_clk, new_refresh;
+ unsigned long baud_rate;
spin_lock_irqsave(&pm_lock, flags);
- if (!write) {
+ if (!write)
*len = 0;
- } else {
+ else {
/* Parse the new frequency */
if (*len > TMPBUFLEN - 1) {
spin_unlock_irqrestore(&pm_lock, flags);
@@ -312,7 +306,7 @@
pll = val / 12;
if ((pll > 33) || (pll < 7)) { /* 396 MHz max, 84 MHz min */
- /* revisit this for higher speed cpus */
+ /* Revisit this for higher speed CPUs */
spin_unlock_irqrestore(&pm_lock, flags);
return -EFAULT;
}
@@ -321,30 +315,28 @@
old_cpu_freq = get_au1x00_speed();
new_cpu_freq = pll * 12 * 1000000;
- new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
+ new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)
+ & 0x03) + 2) * 16));
set_au1x00_speed(new_cpu_freq);
set_au1x00_uart_baud_base(new_baud_base);
old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff;
- new_refresh =
- ((old_refresh * new_cpu_freq) /
- old_cpu_freq) | (au_readl(MEM_SDREFCFG) & ~0x1ffffff);
+ new_refresh = ((old_refresh * new_cpu_freq) / old_cpu_freq) |
+ (au_readl(MEM_SDREFCFG) & ~0x1ffffff);
au_writel(pll, SYS_CPUPLL);
au_sync_delay(1);
au_writel(new_refresh, MEM_SDREFCFG);
au_sync_delay(1);
- for (i = 0; i < 4; i++) {
- if (au_readl
- (UART_BASE + UART_MOD_CNTRL +
- i * 0x00100000) == 3) {
- old_clk =
- au_readl(UART_BASE + UART_CLK +
- i * 0x00100000);
- // baud_rate = baud_base/clk
+ for (i = 0; i < 4; i++)
+ if (au_readl(UART_BASE + UART_MOD_CNTRL +
+ i * 0x00100000) == 3) {
+ old_clk = au_readl(UART_BASE + UART_CLK +
+ i * 0x00100000);
baud_rate = old_baud_base / old_clk;
- /* we won't get an exact baud rate and the error
+ /*
+ * We won't get an exact baud rate and the error
* could be significant enough that our new
* calculation will result in a clock that will
* give us a baud rate that's too far off from
@@ -359,18 +351,14 @@
else if (baud_rate > 17000)
baud_rate = 19200;
else
- (baud_rate = 9600);
- // new_clk = new_baud_base/baud_rate
+ baud_rate = 9600;
new_clk = new_baud_base / baud_rate;
- au_writel(new_clk,
- UART_BASE + UART_CLK +
- i * 0x00100000);
+ au_writel(new_clk, UART_BASE + UART_CLK +
+ i * 0x00100000);
au_sync_delay(10);
}
- }
}
-
/*
* We don't want _any_ interrupts other than match20. Otherwise our
* au1000_calibrate_delay() calculation will be off, potentially a lot.
@@ -428,14 +416,15 @@
__initcall(pm_init);
-
/*
* This is right out of init/main.c
*/
-/* This is the number of bits of precision for the loops_per_jiffy. Each
- bit takes on average 1.5/HZ seconds. This (like the original) is a little
- better than 1% */
+/*
+ * This is the number of bits of precision for the loops_per_jiffy.
+ * Each bit takes on average 1.5/HZ seconds. This (like the original)
+ * is a little better than 1%.
+ */
#define LPS_PREC 8
static void au1000_calibrate_delay(void)
@@ -443,14 +432,14 @@
unsigned long ticks, loopbit;
int lps_precision = LPS_PREC;
- loops_per_jiffy = (1 << 12);
+ loops_per_jiffy = 1 << 12;
while (loops_per_jiffy <<= 1) {
- /* wait for "start of" clock tick */
+ /* Wait for "start of" clock tick */
ticks = jiffies;
while (ticks == jiffies)
/* nothing */ ;
- /* Go .. */
+ /* Go ... */
ticks = jiffies;
__delay(loops_per_jiffy);
ticks = jiffies - ticks;
@@ -458,8 +447,10 @@
break;
}
-/* Do a binary approximation to get loops_per_jiffy set to equal one clock
- (up to lps_precision bits) */
+ /*
+ * Do a binary approximation to get loops_per_jiffy set to be equal
+ * one clock (up to lps_precision bits)
+ */
loops_per_jiffy >>= 1;
loopbit = loops_per_jiffy;
while (lps_precision-- && (loopbit >>= 1)) {
@@ -472,4 +463,4 @@
loops_per_jiffy &= ~loopbit;
}
}
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM */
diff --git a/arch/mips/au1000/common/prom.c b/arch/mips/au1000/common/prom.c
index f10af82..18b310b 100644
--- a/arch/mips/au1000/common/prom.c
+++ b/arch/mips/au1000/common/prom.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* PROM library initialisation code, supports YAMON and U-Boot.
*
- * Copyright 2000, 2001, 2006 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000-2001, 2006, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This file was derived from Carsten Langgaard's
* arch/mips/mips-boards/xx files.
@@ -57,7 +56,7 @@
actr = 1; /* Always ignore argv[0] */
cp = &(arcs_cmdline[0]);
- while(actr < prom_argc) {
+ while (actr < prom_argc) {
strcpy(cp, prom_argv[actr]);
cp += strlen(prom_argv[actr]);
*cp++ = ' ';
@@ -84,10 +83,8 @@
if (yamon) {
if (strcmp(envname, *env++) == 0)
return *env;
- } else {
- if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=')
- return *env + i + 1;
- }
+ } else if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=')
+ return *env + i + 1;
env++;
}
@@ -110,13 +107,13 @@
{
int i;
- for(i = 0; i < 6; i++) {
+ for (i = 0; i < 6; i++) {
unsigned char num;
- if((*str == '.') || (*str == ':'))
+ if ((*str == '.') || (*str == ':'))
str++;
- num = str2hexnum(*str++) << 4;
- num |= (str2hexnum(*str++));
+ num = str2hexnum(*str++) << 4;
+ num |= str2hexnum(*str++);
ea[i] = num;
}
}
diff --git a/arch/mips/au1000/common/puts.c b/arch/mips/au1000/common/puts.c
index e34c67e..55bbe24 100644
--- a/arch/mips/au1000/common/puts.c
+++ b/arch/mips/au1000/common/puts.c
@@ -1,11 +1,10 @@
/*
*
* BRIEF MODULE DESCRIPTION
- * Low level uart routines to directly access a 16550 uart.
+ * Low level UART routines to directly access Alchemy UART.
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -40,12 +39,12 @@
static volatile unsigned long * const com1 = (unsigned long *)SERIAL_BASE;
-
#ifdef SLOW_DOWN
static inline void slow_down(void)
{
- int k;
- for (k=0; k<10000; k++);
+ int k;
+
+ for (k = 0; k < 10000; k++);
}
#else
#define slow_down()
@@ -54,16 +53,16 @@
void
prom_putchar(const unsigned char c)
{
- unsigned char ch;
- int i = 0;
+ unsigned char ch;
+ int i = 0;
- do {
- ch = com1[SER_CMD];
- slow_down();
- i++;
- if (i>TIMEOUT) {
- break;
- }
- } while (0 == (ch & TX_BUSY));
- com1[SER_DATA] = c;
+ do {
+ ch = com1[SER_CMD];
+ slow_down();
+ i++;
+ if (i > TIMEOUT)
+ break;
+ } while (0 == (ch & TX_BUSY));
+
+ com1[SER_DATA] = c;
}
diff --git a/arch/mips/au1000/common/reset.c b/arch/mips/au1000/common/reset.c
index 60cec53..d555429 100644
--- a/arch/mips/au1000/common/reset.c
+++ b/arch/mips/au1000/common/reset.c
@@ -1,11 +1,10 @@
/*
*
* BRIEF MODULE DESCRIPTION
- * Au1000 reset routines.
+ * Au1xx0 reset routines.
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2006, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -28,10 +27,11 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <asm/cacheflush.h>
+
#include <asm/mach-au1x00/au1000.h>
extern int au_sleep(void);
-extern void (*flush_cache_all)(void);
void au1000_restart(char *command)
{
@@ -40,8 +40,8 @@
u32 prid = read_c0_prid();
printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n");
- switch (prid & 0xFF000000)
- {
+
+ switch (prid & 0xFF000000) {
case 0x00000000: /* Au1000 */
au_writel(0x02, 0xb0000010); /* ac97_enable */
au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
@@ -138,9 +138,6 @@
au_writel(0x00, 0xb1900064); /* sys_auxpll */
au_writel(0x00, 0xb1900100); /* sys_pininputen */
break;
-
- default:
- break;
}
set_c0_status(ST0_BEV | ST0_ERL);
@@ -158,25 +155,25 @@
void au1000_halt(void)
{
#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
- /* power off system */
- printk("\n** Powering off...\n");
- au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C);
+ /* Power off system */
+ printk(KERN_NOTICE "\n** Powering off...\n");
+ au_writew(au_readw(0xAF00001C) | (3 << 14), 0xAF00001C);
au_sync();
- while(1); /* should not get here */
+ while (1); /* should not get here */
#else
printk(KERN_NOTICE "\n** You can safely turn off the power\n");
#ifdef CONFIG_MIPS_MIRAGE
au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
#endif
#ifdef CONFIG_MIPS_DB1200
- au_writew(au_readw(0xB980001C) | (1<<14), 0xB980001C);
+ au_writew(au_readw(0xB980001C) | (1 << 14), 0xB980001C);
#endif
#ifdef CONFIG_PM
au_sleep();
- /* should not get here */
- printk(KERN_ERR "Unable to put cpu in sleep mode\n");
- while(1);
+ /* Should not get here */
+ printk(KERN_ERR "Unable to put CPU in sleep mode\n");
+ while (1);
#else
while (1)
__asm__(".set\tmips3\n\t"
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
index 0e86f7a..1ac6b06 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/au1000/common/setup.c
@@ -1,7 +1,6 @@
/*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com
*
* Updates to 2.6, Pete Popov, Embedded Alley Solutions, Inc.
*
@@ -48,7 +47,7 @@
{
struct cpu_spec *sp;
char *argptr;
- unsigned long prid, cpufreq, bclk = 1;
+ unsigned long prid, cpufreq, bclk;
set_cpuspec();
sp = cur_cpu_spec[0];
@@ -66,42 +65,39 @@
cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12;
printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq);
- bclk = sp->cpu_bclk;
- if (bclk)
- {
+ if (sp->cpu_bclk) {
/* Enable BCLK switching */
- bclk = au_readl(0xB190003C);
- au_writel(bclk | 0x60, 0xB190003C);
- printk("BCLK switching enabled!\n");
+ bclk = au_readl(SYS_POWERCTRL);
+ au_writel(bclk | 0x60, SYS_POWERCTRL);
+ printk(KERN_INFO "BCLK switching enabled!\n");
}
- if (sp->cpu_od) {
- /* Various early Au1000 Errata corrected by this */
- set_c0_config(1<<19); /* Set Config[OD] */
- }
- else {
+ if (sp->cpu_od)
+ /* Various early Au1xx0 errata corrected by this */
+ set_c0_config(1 << 19); /* Set Config[OD] */
+ else
/* Clear to obtain best system bus performance */
- clear_c0_config(1<<19); /* Clear Config[OD] */
- }
+ clear_c0_config(1 << 19); /* Clear Config[OD] */
argptr = prom_getcmdline();
#ifdef CONFIG_SERIAL_8250_CONSOLE
- if ((argptr = strstr(argptr, "console=")) == NULL) {
+ argptr = strstr(argptr, "console=");
+ if (argptr == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
#endif
#ifdef CONFIG_FB_AU1100
- if ((argptr = strstr(argptr, "video=")) == NULL) {
- argptr = prom_getcmdline();
- /* default panel */
- /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
- }
+ argptr = strstr(argptr, "video=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ /* default panel */
+ /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
+ }
#endif
-
#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
/* au1000 does not support vra, au1500 and au1100 do */
strcat(argptr, " au1000_audio=vra");
@@ -129,7 +125,7 @@
/* This routine should be valid for all Au1x based boards */
phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
{
- /* Don't fixup 36 bit addresses */
+ /* Don't fixup 36-bit addresses */
if ((phys_addr >> 32) != 0)
return phys_addr;
@@ -145,17 +141,17 @@
}
#endif
- /* All Au1x SOCs have a pcmcia controller */
- /* We setup our 32 bit pseudo addresses to be equal to the
- * 36 bit addr >> 4, to make it easier to check the address
+ /*
+ * All Au1xx0 SOCs have a PCMCIA controller.
+ * We setup our 32-bit pseudo addresses to be equal to the
+ * 36-bit addr >> 4, to make it easier to check the address
* and fix it.
- * The Au1x socket 0 phys attribute address is 0xF 4000 0000.
+ * The PCMCIA socket 0 physical attribute address is 0xF 4000 0000.
* The pseudo address we use is 0xF400 0000. Any address over
- * 0xF400 0000 is a pcmcia pseudo address.
+ * 0xF400 0000 is a PCMCIA pseudo address.
*/
- if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF)) {
+ if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF))
return (phys_t)(phys_addr << 4);
- }
/* default nop */
return phys_addr;
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index bdb6d73..563d939 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -25,11 +25,9 @@
*
* Setting up the clock on the MIPS boards.
*
- * Update. Always configure the kernel with CONFIG_NEW_TIME_C. This
- * will use the user interface gettimeofday() functions from the
- * arch/mips/kernel/time.c, and we provide the clock interrupt processing
- * and the timer offset compute functions. If CONFIG_PM is selected,
- * we also ensure the 32KHz timer is available. -- Dan
+ * We provide the clock interrupt processing and the timer offset compute
+ * functions. If CONFIG_PM is selected, we also ensure the 32KHz timer is
+ * available. -- Dan
*/
#include <linux/types.h>
@@ -47,8 +45,7 @@
#if HZ < 100 || HZ > 1000
#error "unsupported HZ value! Must be in [100,1000]"
#endif
-#define MATCH20_INC (328*100/HZ) /* magic number 328 is for HZ=100... */
-extern void startup_match20_interrupt(irq_handler_t handler);
+#define MATCH20_INC (328 * 100 / HZ) /* magic number 328 is for HZ=100... */
static unsigned long last_pc0, last_match20;
#endif
@@ -61,7 +58,7 @@
{
unsigned long pc0;
int time_elapsed;
- static int jiffie_drift = 0;
+ static int jiffie_drift;
if (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20) {
/* should never happen! */
@@ -70,13 +67,11 @@
}
pc0 = au_readl(SYS_TOYREAD);
- if (pc0 < last_match20) {
+ if (pc0 < last_match20)
/* counter overflowed */
time_elapsed = (0xffffffff - last_match20) + pc0;
- }
- else {
+ else
time_elapsed = pc0 - last_match20;
- }
while (time_elapsed > 0) {
do_timer(1);
@@ -92,8 +87,9 @@
au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
au_sync();
- /* our counter ticks at 10.009765625 ms/tick, we we're running
- * almost 10uS too slow per tick.
+ /*
+ * Our counter ticks at 10.009765625 ms/tick, we we're running
+ * almost 10 uS too slow per tick.
*/
if (jiffie_drift >= 999) {
@@ -117,20 +113,17 @@
/* When we wakeup from sleep, we have to "catch up" on all of the
* timer ticks we have missed.
*/
-void
-wakeup_counter0_adjust(void)
+void wakeup_counter0_adjust(void)
{
unsigned long pc0;
int time_elapsed;
pc0 = au_readl(SYS_TOYREAD);
- if (pc0 < last_match20) {
+ if (pc0 < last_match20)
/* counter overflowed */
time_elapsed = (0xffffffff - last_match20) + pc0;
- }
- else {
+ else
time_elapsed = pc0 - last_match20;
- }
while (time_elapsed > 0) {
time_elapsed -= MATCH20_INC;
@@ -143,10 +136,8 @@
}
-/* This is just for debugging to set the timer for a sleep delay.
-*/
-void
-wakeup_counter0_set(int ticks)
+/* This is just for debugging to set the timer for a sleep delay. */
+void wakeup_counter0_set(int ticks)
{
unsigned long pc0;
@@ -157,21 +148,22 @@
}
#endif
-/* I haven't found anyone that doesn't use a 12 MHz source clock,
+/*
+ * I haven't found anyone that doesn't use a 12 MHz source clock,
* but just in case.....
*/
#define AU1000_SRC_CLK 12000000
/*
* We read the real processor speed from the PLL. This is important
- * because it is more accurate than computing it from the 32KHz
+ * because it is more accurate than computing it from the 32 KHz
* counter, if it exists. If we don't have an accurate processor
* speed, all of the peripherals that derive their clocks based on
* this advertised speed will introduce error and sometimes not work
* properly. This function is futher convoluted to still allow configurations
* to do that in case they have really, really old silicon with a
- * write-only PLL register, that we need the 32KHz when power management
- * "wait" is enabled, and we need to detect if the 32KHz isn't present
+ * write-only PLL register, that we need the 32 KHz when power management
+ * "wait" is enabled, and we need to detect if the 32 KHz isn't present
* but requested......got it? :-) -- Dan
*/
unsigned long calc_clock(void)
@@ -182,8 +174,7 @@
spin_lock_irqsave(&time_lock, flags);
- /* Power management cares if we don't have a 32KHz counter.
- */
+ /* Power management cares if we don't have a 32 KHz counter. */
no_au1xxx_32khz = 0;
counter = au_readl(SYS_COUNTER_CNTRL);
if (counter & SYS_CNTRL_E0) {
@@ -193,7 +184,7 @@
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S);
/* RTC now ticks at 32.768/16 kHz */
- au_writel(trim_divide-1, SYS_RTCTRIM);
+ au_writel(trim_divide - 1, SYS_RTCTRIM);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
@@ -215,9 +206,11 @@
#endif
else
cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
+ /* On Alchemy CPU:counter ratio is 1:1 */
mips_hpt_frequency = cpu_speed;
- // Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16)
- set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
+ /* Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) */
+ set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)
+ & 0x03) + 2) * 16));
spin_unlock_irqrestore(&time_lock, flags);
return cpu_speed;
}
@@ -228,10 +221,10 @@
est_freq += 5000; /* round */
est_freq -= est_freq%10000;
- printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
- (est_freq%1000000)*100/1000000);
- set_au1x00_speed(est_freq);
- set_au1x00_lcd_clock(); // program the LCD clock
+ printk(KERN_INFO "CPU frequency %u.%02u MHz\n",
+ est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000);
+ set_au1x00_speed(est_freq);
+ set_au1x00_lcd_clock(); /* program the LCD clock */
#ifdef CONFIG_PM
/*
@@ -243,30 +236,29 @@
* counter 0 interrupt as a special irq and it doesn't show
* up under /proc/interrupts.
*
- * Check to ensure we really have a 32KHz oscillator before
+ * Check to ensure we really have a 32 KHz oscillator before
* we do this.
*/
if (no_au1xxx_32khz)
- printk("WARNING: no 32KHz clock found.\n");
+ printk(KERN_WARNING "WARNING: no 32KHz clock found.\n");
else {
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S);
au_writel(0, SYS_TOYWRITE);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S);
- au_writel(au_readl(SYS_WAKEMSK) | (1<<8), SYS_WAKEMSK);
+ au_writel(au_readl(SYS_WAKEMSK) | (1 << 8), SYS_WAKEMSK);
au_writel(~0, SYS_WAKESRC);
au_sync();
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
- /* setup match20 to interrupt once every HZ */
+ /* Setup match20 to interrupt once every HZ */
last_pc0 = last_match20 = au_readl(SYS_TOYREAD);
au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
au_sync();
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
setup_irq(AU1000_TOY_MATCH2_INT, &counter0_action);
- /* We can use the real 'wait' instruction.
- */
+ /* We can use the real 'wait' instruction. */
allow_au1k_wait = 1;
}
diff --git a/arch/mips/au1000/db1x00/Makefile b/arch/mips/au1000/db1x00/Makefile
index 51d62bd..274db3b 100644
--- a/arch/mips/au1000/db1x00/Makefile
+++ b/arch/mips/au1000/db1x00/Makefile
@@ -1,8 +1,8 @@
#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
-# Makefile for the Alchemy Semiconductor Db1x00 board.
+# Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
+#
lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/db1x00/board_setup.c b/arch/mips/au1000/db1x00/board_setup.c
index b7dcbad..9e5ccbb 100644
--- a/arch/mips/au1000/db1x00/board_setup.c
+++ b/arch/mips/au1000/db1x00/board_setup.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* Alchemy Db1x00 board setup.
*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -37,49 +36,49 @@
void board_reset(void)
{
- /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
+ /* Hit BCSR.SW_RESET[RESET] */
bcsr->swreset = 0x0000;
}
void __init board_setup(void)
{
- u32 pin_func;
+ u32 pin_func = 0;
- pin_func = 0;
- /* not valid for 1550 */
-
-#if defined(CONFIG_IRDA) && (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
- /* set IRFIRSEL instead of GPIO15 */
- pin_func = au_readl(SYS_PINFUNC) | (u32)((1<<8));
+ /* Not valid for Au1550 */
+#if defined(CONFIG_IRDA) && \
+ (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
+ /* Set IRFIRSEL instead of GPIO15 */
+ pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
au_writel(pin_func, SYS_PINFUNC);
- /* power off until the driver is in use */
+ /* Power off until the driver is in use */
bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
- bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF;
+ bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF;
au_sync();
#endif
bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */
#ifdef CONFIG_MIPS_MIRAGE
- /* enable GPIO[31:0] inputs */
+ /* Enable GPIO[31:0] inputs */
au_writel(0, SYS_PININPUTEN);
- /* GPIO[20] is output, tristate the other input primary GPIO's */
- au_writel((u32)(~(1<<20)), SYS_TRIOUTCLR);
+ /* GPIO[20] is output, tristate the other input primary GPIOs */
+ au_writel(~(1 << 20), SYS_TRIOUTCLR);
- /* set GPIO[210:208] instead of SSI_0 */
- pin_func = au_readl(SYS_PINFUNC) | (u32)(1);
+ /* Set GPIO[210:208] instead of SSI_0 */
+ pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
- /* set GPIO[215:211] for LED's */
- pin_func |= (u32)((5<<2));
+ /* Set GPIO[215:211] for LEDs */
+ pin_func |= 5 << 2;
- /* set GPIO[214:213] for more LED's */
- pin_func |= (u32)((5<<12));
+ /* Set GPIO[214:213] for more LEDs */
+ pin_func |= 5 << 12;
- /* set GPIO[207:200] instead of PCMCIA/LCD */
- pin_func |= (u32)((3<<17));
+ /* Set GPIO[207:200] instead of PCMCIA/LCD */
+ pin_func |= SYS_PF_LCD | SYS_PF_PC;
au_writel(pin_func, SYS_PINFUNC);
- /* Enable speaker amplifier. This should
+ /*
+ * Enable speaker amplifier. This should
* be part of the audio driver.
*/
au_writel(au_readl(GPIO2_DIR) | 0x200, GPIO2_DIR);
@@ -89,21 +88,21 @@
au_sync();
#ifdef CONFIG_MIPS_DB1000
- printk("AMD Alchemy Au1000/Db1000 Board\n");
+ printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1500
- printk("AMD Alchemy Au1500/Db1500 Board\n");
+ printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1100
- printk("AMD Alchemy Au1100/Db1100 Board\n");
+ printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
#endif
#ifdef CONFIG_MIPS_BOSPORUS
- printk("AMD Alchemy Bosporus Board\n");
+ printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
#endif
#ifdef CONFIG_MIPS_MIRAGE
- printk("AMD Alchemy Mirage Board\n");
+ printk(KERN_INFO "AMD Alchemy Mirage Board\n");
#endif
#ifdef CONFIG_MIPS_DB1550
- printk("AMD Alchemy Au1550/Db1550 Board\n");
+ printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
#endif
}
diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c
index d3b967c..5ebe0de 100644
--- a/arch/mips/au1000/db1x00/init.c
+++ b/arch/mips/au1000/db1x00/init.c
@@ -2,9 +2,8 @@
* BRIEF MODULE DESCRIPTION
* PB1000 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -49,8 +48,8 @@
unsigned long memsize;
prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
@@ -58,6 +57,6 @@
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = simple_strtol(memsize_str, NULL, 0);
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/db1x00/irqmap.c b/arch/mips/au1000/db1x00/irqmap.c
index eaa50c7..94c090e 100644
--- a/arch/mips/au1000/db1x00/irqmap.c
+++ b/arch/mips/au1000/db1x00/irqmap.c
@@ -32,32 +32,32 @@
#ifdef CONFIG_MIPS_DB1500
char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT371 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
+ [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_BOSPORUS
char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 11 - miniPCI */
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - SN1741 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
+ [11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */
+ [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_MIRAGE
char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTD, INTX, INTX, INTX}, /* IDSEL 11 - SMI VGX */
- [12] = { -1, INTX, INTX, INTC, INTX}, /* IDSEL 12 - PNX1300 */
- [13] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 13 - miniPCI */
+ [11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */
+ [12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */
+ [13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */
};
#endif
#ifdef CONFIG_MIPS_DB1550
char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTC, INTX, INTX, INTX}, /* IDSEL 11 - on-board HPT371 */
- [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
+ [11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */
+ [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
#endif
diff --git a/arch/mips/au1000/mtx-1/Makefile b/arch/mips/au1000/mtx-1/Makefile
index 85a9094..7c67b3d 100644
--- a/arch/mips/au1000/mtx-1/Makefile
+++ b/arch/mips/au1000/mtx-1/Makefile
@@ -1,7 +1,6 @@
#
# Copyright 2003 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Author: MontaVista Software, Inc. <source@mvista.com>
# Bruno Randolf <bruno.randolf@4g-systems.biz>
#
# Makefile for 4G Systems MTX-1 board.
diff --git a/arch/mips/au1000/mtx-1/board_setup.c b/arch/mips/au1000/mtx-1/board_setup.c
index 5736354..3f80791 100644
--- a/arch/mips/au1000/mtx-1/board_setup.c
+++ b/arch/mips/au1000/mtx-1/board_setup.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* 4G Systems MTX-1 board setup.
*
- * Copyright 2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
* Bruno Randolf <bruno.randolf@4g-systems.biz>
*
* This program is free software; you can redistribute it and/or modify it
@@ -34,7 +33,7 @@
#include <asm/mach-au1x00/au1000.h>
extern int (*board_pci_idsel)(unsigned int devsel, int assert);
-int mtx1_pci_idsel(unsigned int devsel, int assert);
+int mtx1_pci_idsel(unsigned int devsel, int assert);
void board_reset(void)
{
@@ -45,36 +44,36 @@
void __init board_setup(void)
{
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- // enable USB power switch
- au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR );
- au_writel( 0x100000, GPIO2_OUTPUT );
+ /* Enable USB power switch */
+ au_writel(au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR);
+ au_writel(0x100000, GPIO2_OUTPUT);
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
#ifdef CONFIG_PCI
#if defined(__MIPSEB__)
- au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG);
+ au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
#else
au_writel(0xf, Au1500_PCI_CFG);
#endif
#endif
- // initialize sys_pinfunc:
- au_writel( SYS_PF_NI2, SYS_PINFUNC );
+ /* Initialize sys_pinfunc */
+ au_writel(SYS_PF_NI2, SYS_PINFUNC);
- // initialize GPIO
- au_writel( 0xFFFFFFFF, SYS_TRIOUTCLR );
- au_writel( 0x00000001, SYS_OUTPUTCLR ); // set M66EN (PCI 66MHz) to OFF
- au_writel( 0x00000008, SYS_OUTPUTSET ); // set PCI CLKRUN# to OFF
- au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON
- au_writel( 0x00000020, SYS_OUTPUTCLR ); // set eth PHY TX_ER to OFF
+ /* Initialize GPIO */
+ au_writel(0xFFFFFFFF, SYS_TRIOUTCLR);
+ au_writel(0x00000001, SYS_OUTPUTCLR); /* set M66EN (PCI 66MHz) to OFF */
+ au_writel(0x00000008, SYS_OUTPUTSET); /* set PCI CLKRUN# to OFF */
+ au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */
+ au_writel(0x00000020, SYS_OUTPUTCLR); /* set eth PHY TX_ER to OFF */
- // enable LED and set it to green
- au_writel( au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR );
- au_writel( 0x18000800, GPIO2_OUTPUT );
+ /* Enable LED and set it to green */
+ au_writel(au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR);
+ au_writel(0x18000800, GPIO2_OUTPUT);
board_pci_idsel = mtx1_pci_idsel;
- printk("4G Systems MTX-1 Board\n");
+ printk(KERN_INFO "4G Systems MTX-1 Board\n");
}
int
@@ -82,20 +81,18 @@
{
#define MTX_IDSEL_ONLY_0_AND_3 0
#if MTX_IDSEL_ONLY_0_AND_3
- if (devsel != 0 && devsel != 3) {
- printk("*** not 0 or 3\n");
- return 0;
- }
+ if (devsel != 0 && devsel != 3) {
+ printk(KERN_ERR "*** not 0 or 3\n");
+ return 0;
+ }
#endif
- if (assert && devsel != 0) {
- // suppress signal to cardbus
- au_writel( 0x00000002, SYS_OUTPUTCLR ); // set EXT_IO3 OFF
- }
- else {
- au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON
- }
- au_sync_udelay(1);
- return 1;
+ if (assert && devsel != 0)
+ /* Suppress signal to Cardbus */
+ au_writel(0x00000002, SYS_OUTPUTCLR); /* set EXT_IO3 OFF */
+ else
+ au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */
+ au_sync_udelay(1);
+ return 1;
}
diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c
index c015cbc..33a4aeb 100644
--- a/arch/mips/au1000/mtx-1/init.c
+++ b/arch/mips/au1000/mtx-1/init.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* 4G Systems MTX-1 board setup
*
- * Copyright 2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
* Bruno Randolf <bruno.randolf@4g-systems.biz>
*
* This program is free software; you can redistribute it and/or modify it
@@ -47,8 +46,8 @@
unsigned long memsize;
prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
@@ -56,6 +55,6 @@
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = simple_strtol(memsize_str, NULL, 0);
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/mtx-1/irqmap.c b/arch/mips/au1000/mtx-1/irqmap.c
index 78d70c4..f2bf029 100644
--- a/arch/mips/au1000/mtx-1/irqmap.c
+++ b/arch/mips/au1000/mtx-1/irqmap.c
@@ -31,18 +31,18 @@
#include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = {
- [0] = { -1, INTA, INTA, INTX, INTX}, /* IDSEL 00 - AdapterA-Slot0 (top) */
- [1] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
- [2] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 02 - AdapterB-Slot0 (top) */
- [3] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
- [4] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 04 - AdapterC-Slot0 (top) */
- [5] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
- [6] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 06 - AdapterD-Slot0 (top) */
- [7] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
+ [0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */
+ [1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
+ [2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */
+ [3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
+ [4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */
+ [5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
+ [6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */
+ [7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/au1000/mtx-1/platform.c b/arch/mips/au1000/mtx-1/platform.c
index a7edbf0..9807be3 100644
--- a/arch/mips/au1000/mtx-1/platform.c
+++ b/arch/mips/au1000/mtx-1/platform.c
@@ -21,11 +21,10 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
+#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
-#include <asm/gpio.h>
-
static struct gpio_keys_button mtx1_gpio_button[] = {
{
.gpio = 207,
diff --git a/arch/mips/au1000/pb1000/Makefile b/arch/mips/au1000/pb1000/Makefile
index daa1a50..99bbec0 100644
--- a/arch/mips/au1000/pb1000/Makefile
+++ b/arch/mips/au1000/pb1000/Makefile
@@ -1,8 +1,8 @@
#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
-# Makefile for the Alchemy Semiconductor PB1000 board.
+# Makefile for the Alchemy Semiconductor Pb1000 board.
+#
lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1000/board_setup.c b/arch/mips/au1000/pb1000/board_setup.c
index 33f15ac..25df167 100644
--- a/arch/mips/au1000/pb1000/board_setup.c
+++ b/arch/mips/au1000/pb1000/board_setup.c
@@ -1,7 +1,6 @@
/*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -40,128 +39,126 @@
u32 sys_freqctrl, sys_clksrc;
u32 prid = read_c0_prid();
- // set AUX clock to 12MHz * 8 = 96 MHz
+ /* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
au_writel(0, SYS_PINSTATERD);
udelay(100);
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- /* zero and disable FREQ2 */
+ /* Zero and disable FREQ2 */
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
- /* zero and disable USBH/USBD clocks */
+ /* Zero and disable USBH/USBD clocks */
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x00007FE0;
+ sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+ SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
au_writel(sys_clksrc, SYS_CLKSRC);
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x00007FE0;
+ sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+ SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
- switch (prid & 0x000000FF)
- {
+ switch (prid & 0x000000FF) {
case 0x00: /* DA */
case 0x01: /* HA */
case 0x02: /* HB */
- /* CPU core freq to 48MHz to slow it way down... */
- au_writel(4, SYS_CPUPLL);
+ /* CPU core freq to 48 MHz to slow it way down... */
+ au_writel(4, SYS_CPUPLL);
- /*
- * Setup 48MHz FREQ2 from CPUPLL for USB Host
- */
- /* FRDIV2=3 -> div by 8 of 384MHz -> 48MHz */
- sys_freqctrl |= ((3<<22) | (1<<21) | (0<<20));
- au_writel(sys_freqctrl, SYS_FREQCTRL0);
+ /*
+ * Setup 48 MHz FREQ2 from CPUPLL for USB Host
+ * FRDIV2 = 3 -> div by 8 of 384 MHz -> 48 MHz
+ */
+ sys_freqctrl |= (3 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2;
+ au_writel(sys_freqctrl, SYS_FREQCTRL0);
- /* CPU core freq to 384MHz */
- au_writel(0x20, SYS_CPUPLL);
+ /* CPU core freq to 384 MHz */
+ au_writel(0x20, SYS_CPUPLL);
- printk("Au1000: 48MHz OHCI workaround enabled\n");
+ printk(KERN_INFO "Au1000: 48 MHz OHCI workaround enabled\n");
break;
- default: /* HC and newer */
- // FREQ2 = aux/2 = 48 MHz
- sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
- au_writel(sys_freqctrl, SYS_FREQCTRL0);
+ default: /* HC and newer */
+ /* FREQ2 = aux / 2 = 48 MHz */
+ sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) |
+ SYS_FC_FE2 | SYS_FC_FS2;
+ au_writel(sys_freqctrl, SYS_FREQCTRL0);
break;
}
/*
- * Route 48MHz FREQ2 into USB Host and/or Device
+ * Route 48 MHz FREQ2 into USB Host and/or Device
*/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
-#endif
+ sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT;
au_writel(sys_clksrc, SYS_CLKSRC);
- // configure pins GPIO[14:9] as GPIO
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8080);
+ /* Configure pins GPIO[14:9] as GPIO */
+ pin_func = au_readl(SYS_PINFUNC) & ~(SYS_PF_UR3 | SYS_PF_USB);
- // 2nd USB port is USB host
- pin_func |= 0x8000;
+ /* 2nd USB port is USB host */
+ pin_func |= SYS_PF_USB;
au_writel(pin_func, SYS_PINFUNC);
au_writel(0x2800, SYS_TRIOUTCLR);
au_writel(0x0030, SYS_OUTPUTCLR);
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
- // make gpio 15 an input (for interrupt line)
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x100);
- // we don't need I2S, so make it available for GPIO[31:29]
- pin_func |= (1<<5);
+ /* Make GPIO 15 an input (for interrupt line) */
+ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_IRF;
+ /* We don't need I2S, so make it available for GPIO[31:29] */
+ pin_func |= SYS_PF_I2S;
au_writel(pin_func, SYS_PINFUNC);
au_writel(0x8000, SYS_TRIOUTCLR);
- static_cfg0 = au_readl(MEM_STCFG0) & (u32)(~0xc00);
+ static_cfg0 = au_readl(MEM_STCFG0) & ~0xc00;
au_writel(static_cfg0, MEM_STCFG0);
- // configure RCE2* for LCD
+ /* configure RCE2* for LCD */
au_writel(0x00000004, MEM_STCFG2);
- // MEM_STTIME2
+ /* MEM_STTIME2 */
au_writel(0x09000000, MEM_STTIME2);
- // Set 32-bit base address decoding for RCE2*
+ /* Set 32-bit base address decoding for RCE2* */
au_writel(0x10003ff0, MEM_STADDR2);
- // PCI CPLD setup
- // expand CE0 to cover PCI
+ /*
+ * PCI CPLD setup
+ * Expand CE0 to cover PCI
+ */
au_writel(0x11803e40, MEM_STADDR1);
- // burst visibility on
+ /* Burst visibility on */
au_writel(au_readl(MEM_STCFG0) | 0x1000, MEM_STCFG0);
- au_writel(0x83, MEM_STCFG1); // ewait enabled, flash timing
- au_writel(0x33030a10, MEM_STTIME1); // slower timing for FPGA
+ au_writel(0x83, MEM_STCFG1); /* ewait enabled, flash timing */
+ au_writel(0x33030a10, MEM_STTIME1); /* slower timing for FPGA */
- /* setup the static bus controller */
+ /* Setup the static bus controller */
au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */
au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
-#ifdef CONFIG_PCI
- au_writel(0, PCI_BRIDGE_CONFIG); // set extend byte to 0
- au_writel(0, SDRAM_MBAR); // set mbar to 0
- au_writel(0x2, SDRAM_CMD); // enable memory accesses
- au_sync_delay(1);
-#endif
-
- /* Enable Au1000 BCLK switching - note: sed1356 must not use
- * its BCLK (Au1000 LCLK) for any timings */
- switch (prid & 0x000000FF)
- {
+ /*
+ * Enable Au1000 BCLK switching - note: sed1356 must not use
+ * its BCLK (Au1000 LCLK) for any timings
+ */
+ switch (prid & 0x000000FF) {
case 0x00: /* DA */
case 0x01: /* HA */
case 0x02: /* HB */
break;
default: /* HC and newer */
- /* Enable sys bus clock divider when IDLE state or no bus
- activity. */
+ /*
+ * Enable sys bus clock divider when IDLE state or no bus
+ * activity.
+ */
au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
break;
}
diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/au1000/pb1000/init.c
index 549447df7..3837365 100644
--- a/arch/mips/au1000/pb1000/init.c
+++ b/arch/mips/au1000/pb1000/init.c
@@ -1,10 +1,9 @@
/*
* BRIEF MODULE DESCRIPTION
- * PB1000 board setup
+ * Pb1000 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -44,16 +43,15 @@
unsigned char *memsize_str;
unsigned long memsize;
- prom_argc = (int) fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argc = (int)fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
+ if (!memsize_str)
memsize = 0x04000000;
- } else {
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
+ else
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/pb1100/Makefile b/arch/mips/au1000/pb1100/Makefile
index 996236d..793e97c 100644
--- a/arch/mips/au1000/pb1100/Makefile
+++ b/arch/mips/au1000/pb1100/Makefile
@@ -1,8 +1,8 @@
#
-# Copyright 2000,2001 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2001, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
# Makefile for the Alchemy Semiconductor Pb1100 board.
+#
lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1100/board_setup.c b/arch/mips/au1000/pb1100/board_setup.c
index 656164c..c0bfd59 100644
--- a/arch/mips/au1000/pb1100/board_setup.c
+++ b/arch/mips/au1000/pb1100/board_setup.c
@@ -1,7 +1,6 @@
/*
- * Copyright 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2002, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -32,15 +31,15 @@
void board_reset(void)
{
- /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
- au_writel(0x00000000, 0xAE00001C);
+ /* Hit BCSR.RST_VDDI[SOFT_RESET] */
+ au_writel(0x00000000, PB1100_RST_VDDI);
}
void __init board_setup(void)
{
- volatile void __iomem * base = (volatile void __iomem *) 0xac000000UL;
+ volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;
- // set AUX clock to 12MHz * 8 = 96 MHz
+ /* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
au_writel(0, SYS_PININPUTEN);
udelay(100);
@@ -49,44 +48,47 @@
{
u32 pin_func, sys_freqctrl, sys_clksrc;
- // configure pins GPIO[14:9] as GPIO
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x80);
+ /* Configure pins GPIO[14:9] as GPIO */
+ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
- /* zero and disable FREQ2 */
+ /* Zero and disable FREQ2 */
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
- /* zero and disable USBH/USBD/IrDA clock */
+ /* Zero and disable USBH/USBD/IrDA clock */
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x0000001F;
+ sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK);
au_writel(sys_clksrc, SYS_CLKSRC);
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x0000001F;
+ sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK);
- // FREQ2 = aux/2 = 48 MHz
- sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
+ /* FREQ2 = aux / 2 = 48 MHz */
+ sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) |
+ SYS_FC_FE2 | SYS_FC_FS2;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
/*
- * Route 48MHz FREQ2 into USBH/USBD/IrDA
+ * Route 48 MHz FREQ2 into USBH/USBD/IrDA
*/
- sys_clksrc |= ((4<<2) | (0<<1) | 0 );
+ sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MIR_BIT;
au_writel(sys_clksrc, SYS_CLKSRC);
- /* setup the static bus controller */
+ /* Setup the static bus controller */
au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */
au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
- // get USB Functionality pin state (device vs host drive pins)
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
- // 2nd USB port is USB host
- pin_func |= 0x8000;
+ /*
+ * Get USB Functionality pin state (device vs host drive pins).
+ */
+ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB;
+ /* 2nd USB port is USB host. */
+ pin_func |= SYS_PF_USB;
au_writel(pin_func, SYS_PINFUNC);
}
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
@@ -94,12 +96,12 @@
/* Enable sys bus clock divider when IDLE state or no bus activity. */
au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
- // Enable the RTC if not already enabled
+ /* Enable the RTC if not already enabled. */
if (!(readb(base + 0x28) & 0x20)) {
writeb(readb(base + 0x28) | 0x20, base + 0x28);
au_sync();
}
- // Put the clock in BCD mode
+ /* Put the clock in BCD mode. */
if (readb(base + 0x2C) & 0x4) { /* reg B */
writeb(readb(base + 0x2c) & ~0x4, base + 0x2c);
au_sync();
diff --git a/arch/mips/au1000/pb1100/init.c b/arch/mips/au1000/pb1100/init.c
index c913446..8355483 100644
--- a/arch/mips/au1000/pb1100/init.c
+++ b/arch/mips/au1000/pb1100/init.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* Pb1100 board setup
*
- * Copyright 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2002, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -46,8 +45,8 @@
unsigned long memsize;
prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg3;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg3;
prom_init_cmdline();
@@ -55,7 +54,7 @@
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = simple_strtol(memsize_str, NULL, 0);
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/pb1100/irqmap.c b/arch/mips/au1000/pb1100/irqmap.c
index b5021e3..9b7dd8b 100644
--- a/arch/mips/au1000/pb1100/irqmap.c
+++ b/arch/mips/au1000/pb1100/irqmap.c
@@ -1,6 +1,6 @@
/*
* BRIEF MODULE DESCRIPTION
- * Au1xxx irq map table
+ * Au1xx0 IRQ map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
@@ -31,10 +31,10 @@
#include <asm/mach-au1x00/au1000.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card Fully_Interted#
- { AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card STSCHG#
- { AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card IRQ#
- { AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, // DC_IRQ#
+ { AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */
+ { AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card STSCHG# */
+ { AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card IRQ# */
+ { AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, /* DC_IRQ# */
};
int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff --git a/arch/mips/au1000/pb1200/Makefile b/arch/mips/au1000/pb1200/Makefile
index 4fe02ea..d678adf 100644
--- a/arch/mips/au1000/pb1200/Makefile
+++ b/arch/mips/au1000/pb1200/Makefile
@@ -1,5 +1,5 @@
#
-# Makefile for the Alchemy Semiconductor PB1200 board.
+# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards.
#
lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/au1000/pb1200/board_setup.c
index 4493a79..6cb21150 100644
--- a/arch/mips/au1000/pb1200/board_setup.c
+++ b/arch/mips/au1000/pb1200/board_setup.c
@@ -27,16 +27,8 @@
#include <linux/init.h>
#include <linux/sched.h>
-#include <au1000.h>
#include <prom.h>
-
-#ifdef CONFIG_MIPS_PB1200
-#include <asm/mach-pb1x00/pb1200.h>
-#endif
-
-#ifdef CONFIG_MIPS_DB1200
-#include <asm/mach-db1x00/db1200.h>
-#endif
+#include <au1xxx.h>
extern void _board_init_irq(void);
extern void (*board_init_irq)(void);
@@ -53,56 +45,57 @@
#if 0
{
- u32 pin_func;
+ u32 pin_func;
- /* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
- * but it is board specific code, so put it here.
- */
- pin_func = au_readl(SYS_PINFUNC);
- au_sync();
- pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
- au_writel(pin_func, SYS_PINFUNC);
+ /*
+ * Enable PSC1 SYNC for AC97. Normaly done in audio driver,
+ * but it is board specific code, so put it here.
+ */
+ pin_func = au_readl(SYS_PINFUNC);
+ au_sync();
+ pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
+ au_writel(pin_func, SYS_PINFUNC);
- au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
- au_sync();
+ au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
+ au_sync();
}
#endif
#if defined(CONFIG_I2C_AU1550)
{
- u32 freq0, clksrc;
- u32 pin_func;
+ u32 freq0, clksrc;
+ u32 pin_func;
- /* Select SMBUS in CPLD */
- bcsr->resets &= ~(BCSR_RESETS_PCS0MUX);
+ /* Select SMBus in CPLD */
+ bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
- pin_func = au_readl(SYS_PINFUNC);
- au_sync();
- pin_func &= ~(3<<17 | 1<<4);
- /* Set GPIOs correctly */
- pin_func |= 2<<17;
- au_writel(pin_func, SYS_PINFUNC);
- au_sync();
+ pin_func = au_readl(SYS_PINFUNC);
+ au_sync();
+ pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
+ /* Set GPIOs correctly */
+ pin_func |= 2 << 17;
+ au_writel(pin_func, SYS_PINFUNC);
+ au_sync();
- /* The i2c driver depends on 50Mhz clock */
- freq0 = au_readl(SYS_FREQCTRL0);
- au_sync();
- freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
- freq0 |= (3<<SYS_FC_FRDIV1_BIT);
- /* 396Mhz / (3+1)*2 == 49.5Mhz */
- au_writel(freq0, SYS_FREQCTRL0);
- au_sync();
- freq0 |= SYS_FC_FE1;
- au_writel(freq0, SYS_FREQCTRL0);
- au_sync();
+ /* The I2C driver depends on 50 MHz clock */
+ freq0 = au_readl(SYS_FREQCTRL0);
+ au_sync();
+ freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
+ freq0 |= 3 << SYS_FC_FRDIV1_BIT;
+ /* 396 MHz / (3 + 1) * 2 == 49.5 MHz */
+ au_writel(freq0, SYS_FREQCTRL0);
+ au_sync();
+ freq0 |= SYS_FC_FE1;
+ au_writel(freq0, SYS_FREQCTRL0);
+ au_sync();
- clksrc = au_readl(SYS_CLKSRC);
- au_sync();
- clksrc &= ~0x01f00000;
- /* bit 22 is EXTCLK0 for PSC0 */
- clksrc |= (0x3 << 22);
- au_writel(clksrc, SYS_CLKSRC);
- au_sync();
+ clksrc = au_readl(SYS_CLKSRC);
+ au_sync();
+ clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK);
+ /* Bit 22 is EXTCLK0 for PSC0 */
+ clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT;
+ au_writel(clksrc, SYS_CLKSRC);
+ au_sync();
}
#endif
@@ -116,27 +109,27 @@
#endif
#endif
- /* The Pb1200 development board uses external MUX for PSC0 to
- support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
- */
+ /*
+ * The Pb1200 development board uses external MUX for PSC0 to
+ * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
+ */
#ifdef CONFIG_I2C_AU1550
- bcsr->resets &= (~BCSR_RESETS_PCS0MUX);
+ bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
#endif
au_sync();
#ifdef CONFIG_MIPS_PB1200
- printk("AMD Alchemy Pb1200 Board\n");
+ printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1200
- printk("AMD Alchemy Db1200 Board\n");
+ printk(KERN_INFO "AMD Alchemy Db1200 Board\n");
#endif
/* Setup Pb1200 External Interrupt Controller */
board_init_irq = _board_init_irq;
}
-int
-board_au1200fb_panel(void)
+int board_au1200fb_panel(void)
{
BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
int p;
@@ -147,23 +140,23 @@
return p;
}
-int
-board_au1200fb_panel_init(void)
+int board_au1200fb_panel_init(void)
{
/* Apply power */
- BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
- bcsr->board |= (BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
- /*printk("board_au1200fb_panel_init()\n"); */
+ BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+ bcsr->board |= BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL;
+ /* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */
return 0;
}
-int
-board_au1200fb_panel_shutdown(void)
+int board_au1200fb_panel_shutdown(void)
{
/* Remove power */
- BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
- bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
- /*printk("board_au1200fb_panel_shutdown()\n"); */
+ BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+ bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+ BCSR_BOARD_LCDBL);
+ /* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */
return 0;
}
-
diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c
index 72af550..09fd63b 100644
--- a/arch/mips/au1000/pb1200/init.c
+++ b/arch/mips/au1000/pb1200/init.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* PB1200 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -45,16 +44,15 @@
unsigned char *memsize_str;
unsigned long memsize;
- prom_argc = (int) fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argc = (int)fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
+ if (!memsize_str)
memsize = 0x08000000;
- } else {
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
+ else
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/au1000/pb1200/irqmap.c
index e61eb8e..2a505ad 100644
--- a/arch/mips/au1000/pb1200/irqmap.c
+++ b/arch/mips/au1000/pb1200/irqmap.c
@@ -39,25 +39,25 @@
#endif
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade
+ /* This is external interrupt cascade */
+ { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 },
};
int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
/*
- * Support for External interrupts on the PbAu1200 Development platform.
+ * Support for External interrupts on the Pb1200 Development platform.
*/
-static volatile int pb1200_cascade_en=0;
+static volatile int pb1200_cascade_en;
-irqreturn_t pb1200_cascade_handler( int irq, void *dev_id)
+irqreturn_t pb1200_cascade_handler(int irq, void *dev_id)
{
unsigned short bisr = bcsr->int_status;
int extirq_nr = 0;
- /* Clear all the edge interrupts. This has no effect on level */
+ /* Clear all the edge interrupts. This has no effect on level. */
bcsr->int_status = bisr;
- for( ; bisr; bisr &= (bisr-1) )
- {
+ for ( ; bisr; bisr &= bisr - 1) {
extirq_nr = PB1200_INT_BEGIN + __ffs(bisr);
/* Ack and dispatch IRQ */
do_IRQ(extirq_nr);
@@ -68,26 +68,20 @@
inline void pb1200_enable_irq(unsigned int irq_nr)
{
- bcsr->intset_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
- bcsr->intset = 1<<(irq_nr - PB1200_INT_BEGIN);
+ bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
+ bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN);
}
inline void pb1200_disable_irq(unsigned int irq_nr)
{
- bcsr->intclr_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
- bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN);
+ bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
+ bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
}
static unsigned int pb1200_setup_cascade(void)
{
- int err;
-
- err = request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
- 0, "Pb1200 Cascade", &pb1200_cascade_handler);
- if (err)
- return err;
-
- return 0;
+ return request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
+ 0, "Pb1200 Cascade", &pb1200_cascade_handler);
}
static unsigned int pb1200_startup_irq(unsigned int irq)
@@ -132,23 +126,23 @@
unsigned int irq;
#ifdef CONFIG_MIPS_PB1200
- /* We have a problem with CPLD rev3. Enable a workaround */
+ /* We have a problem with CPLD rev 3. */
if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) {
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
- printk("updated to latest revision. This software will not\n");
- printk("work on anything less than CPLD rev4\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
+ printk(KERN_ERR "updated to latest revision. This software will\n");
+ printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
panic("Game over. Your score is 0.");
}
#endif
@@ -161,6 +155,6 @@
/*
* GPIO_7 can not be hooked here, so it is hooked upon first
- * request of any source attached to the cascade
+ * request of any source attached to the cascade.
*/
}
diff --git a/arch/mips/au1000/pb1500/Makefile b/arch/mips/au1000/pb1500/Makefile
index 97a7308..602f38d 100644
--- a/arch/mips/au1000/pb1500/Makefile
+++ b/arch/mips/au1000/pb1500/Makefile
@@ -1,8 +1,8 @@
#
-# Copyright 2000,2001 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2001, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
# Makefile for the Alchemy Semiconductor Pb1500 board.
+#
lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1500/board_setup.c b/arch/mips/au1000/pb1500/board_setup.c
index 24c652e..035771c 100644
--- a/arch/mips/au1000/pb1500/board_setup.c
+++ b/arch/mips/au1000/pb1500/board_setup.c
@@ -1,7 +1,6 @@
/*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -32,8 +31,8 @@
void board_reset(void)
{
- /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
- au_writel(0x00000000, 0xAE00001C);
+ /* Hit BCSR.RST_VDDI[SOFT_RESET] */
+ au_writel(0x00000000, PB1500_RST_VDDI);
}
void __init board_setup(void)
@@ -42,7 +41,7 @@
u32 sys_freqctrl, sys_clksrc;
sys_clksrc = sys_freqctrl = pin_func = 0;
- // set AUX clock to 12MHz * 8 = 96 MHz
+ /* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
au_writel(0, SYS_PINSTATERD);
udelay(100);
@@ -51,51 +50,48 @@
/* GPIO201 is input for PCMCIA card detect */
/* GPIO203 is input for PCMCIA interrupt request */
- au_writel(au_readl(GPIO2_DIR) & (u32)(~((1<<1)|(1<<3))), GPIO2_DIR);
+ au_writel(au_readl(GPIO2_DIR) & ~((1 << 1) | (1 << 3)), GPIO2_DIR);
- /* zero and disable FREQ2 */
+ /* Zero and disable FREQ2 */
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
/* zero and disable USBH/USBD clocks */
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x00007FE0;
+ sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+ SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
au_writel(sys_clksrc, SYS_CLKSRC);
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x00007FE0;
+ sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+ SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
- // FREQ2 = aux/2 = 48 MHz
- sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
+ /* FREQ2 = aux/2 = 48 MHz */
+ sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2 | SYS_FC_FS2;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
/*
* Route 48MHz FREQ2 into USB Host and/or Device
*/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
-#endif
+ sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT;
au_writel(sys_clksrc, SYS_CLKSRC);
-
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
- // 2nd USB port is USB host
- pin_func |= 0x8000;
+ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB;
+ /* 2nd USB port is USB host */
+ pin_func |= SYS_PF_USB;
au_writel(pin_func, SYS_PINFUNC);
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
-
-
#ifdef CONFIG_PCI
- // Setup PCI bus controller
+ /* Setup PCI bus controller */
au_writel(0, Au1500_PCI_CMEM);
au_writel(0x00003fff, Au1500_CFG_BASE);
#if defined(__MIPSEB__)
- au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG);
+ au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
#else
au_writel(0xf, Au1500_PCI_CFG);
#endif
@@ -112,11 +108,11 @@
/* Enable the RTC if not already enabled */
if (!(au_readl(0xac000028) & 0x20)) {
- printk("enabling clock ...\n");
+ printk(KERN_INFO "enabling clock ...\n");
au_writel((au_readl(0xac000028) | 0x20), 0xac000028);
}
/* Put the clock in BCD mode */
- if (au_readl(0xac00002C) & 0x4) { /* reg B */
+ if (au_readl(0xac00002c) & 0x4) { /* reg B */
au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c);
au_sync();
}
diff --git a/arch/mips/au1000/pb1500/init.c b/arch/mips/au1000/pb1500/init.c
index 488507c..49f51e1 100644
--- a/arch/mips/au1000/pb1500/init.c
+++ b/arch/mips/au1000/pb1500/init.c
@@ -1,11 +1,10 @@
/*
*
* BRIEF MODULE DESCRIPTION
- * PB1500 board setup
+ * Pb1500 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -45,16 +44,15 @@
unsigned char *memsize_str;
unsigned long memsize;
- prom_argc = (int) fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argc = (int)fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
+ if (!memsize_str)
memsize = 0x04000000;
- } else {
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
+ else
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/pb1500/irqmap.c b/arch/mips/au1000/pb1500/irqmap.c
index 4817ab4..39c4682 100644
--- a/arch/mips/au1000/pb1500/irqmap.c
+++ b/arch/mips/au1000/pb1500/irqmap.c
@@ -31,12 +31,12 @@
#include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT370 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
+ [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/au1000/pb1550/Makefile b/arch/mips/au1000/pb1550/Makefile
index aa35bc6..7d8beca 100644
--- a/arch/mips/au1000/pb1550/Makefile
+++ b/arch/mips/au1000/pb1550/Makefile
@@ -1,9 +1,8 @@
#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
-# Makefile for the Alchemy Semiconductor PB1000 board.
+# Makefile for the Alchemy Semiconductor Pb1550 board.
#
lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1550/board_setup.c b/arch/mips/au1000/pb1550/board_setup.c
index 45d6087..0ed76b6 100644
--- a/arch/mips/au1000/pb1550/board_setup.c
+++ b/arch/mips/au1000/pb1550/board_setup.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* Alchemy Pb1550 board setup.
*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -35,15 +34,16 @@
void board_reset(void)
{
- /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
- au_writew(au_readw(0xAF00001C) & ~(1<<15), 0xAF00001C);
+ /* Hit BCSR.SYSTEM[RESET] */
+ au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C);
}
void __init board_setup(void)
{
u32 pin_func;
- /* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
+ /*
+ * Enable PSC1 SYNC for AC'97. Normaly done in audio driver,
* but it is board specific code, so put it here.
*/
pin_func = au_readl(SYS_PINFUNC);
@@ -51,8 +51,8 @@
pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
au_writel(pin_func, SYS_PINFUNC);
- au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
+ au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
au_sync();
- printk("AMD Alchemy Pb1550 Board\n");
+ printk(KERN_INFO "AMD Alchemy Pb1550 Board\n");
}
diff --git a/arch/mips/au1000/pb1550/init.c b/arch/mips/au1000/pb1550/init.c
index f6b2fc5..1b5f5843 100644
--- a/arch/mips/au1000/pb1550/init.c
+++ b/arch/mips/au1000/pb1550/init.c
@@ -1,11 +1,10 @@
/*
*
* BRIEF MODULE DESCRIPTION
- * PB1550 board setup
+ * Pb1550 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -45,16 +44,15 @@
unsigned char *memsize_str;
unsigned long memsize;
- prom_argc = (int) fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argc = (int)fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
+ if (!memsize_str)
memsize = 0x08000000;
- } else {
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
+ else
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/pb1550/irqmap.c b/arch/mips/au1000/pb1550/irqmap.c
index e1dac37..a02a4d1 100644
--- a/arch/mips/au1000/pb1550/irqmap.c
+++ b/arch/mips/au1000/pb1550/irqmap.c
@@ -1,6 +1,6 @@
/*
* BRIEF MODULE DESCRIPTION
- * Au1xxx irq map table
+ * Au1xx0 IRQ map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
@@ -31,8 +31,8 @@
#include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
+ [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
diff --git a/arch/mips/au1000/xxs1500/Makefile b/arch/mips/au1000/xxs1500/Makefile
index 44d7f70..db3c526 100644
--- a/arch/mips/au1000/xxs1500/Makefile
+++ b/arch/mips/au1000/xxs1500/Makefile
@@ -1,7 +1,6 @@
#
# Copyright 2003 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
# Makefile for MyCable XXS1500 board.
#
diff --git a/arch/mips/au1000/xxs1500/board_setup.c b/arch/mips/au1000/xxs1500/board_setup.c
index 79d1798..4c587ac 100644
--- a/arch/mips/au1000/xxs1500/board_setup.c
+++ b/arch/mips/au1000/xxs1500/board_setup.c
@@ -1,7 +1,6 @@
/*
- * Copyright 2000-2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000-2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -39,40 +38,40 @@
{
u32 pin_func;
- // set multiple use pins (UART3/GPIO) to UART (it's used as UART too)
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~SYS_PF_UR3);
+ /* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */
+ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
pin_func |= SYS_PF_UR3;
au_writel(pin_func, SYS_PINFUNC);
- // enable UART
- au_writel(0x01, UART3_ADDR+UART_MOD_CNTRL); // clock enable (CE)
+ /* Enable UART */
+ au_writel(0x01, UART3_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */
mdelay(10);
- au_writel(0x03, UART3_ADDR+UART_MOD_CNTRL); // CE and "enable"
+ au_writel(0x03, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
mdelay(10);
- // enable DTR = USB power up
- au_writel(0x01, UART3_ADDR+UART_MCR); //? UART_MCR_DTR is 0x01???
+ /* Enable DTR = USB power up */
+ au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */
#ifdef CONFIG_PCMCIA_XXS1500
- /* setup pcmcia signals */
+ /* Setup PCMCIA signals */
au_writel(0, SYS_PININPUTEN);
- /* gpio 0, 1, and 4 are inputs */
- au_writel(1 | (1<<1) | (1<<4), SYS_TRIOUTCLR);
+ /* GPIO 0, 1, and 4 are inputs */
+ au_writel(1 | (1 << 1) | (1 << 4), SYS_TRIOUTCLR);
- /* enable GPIO2 if not already enabled */
+ /* Enable GPIO2 if not already enabled */
au_writel(1, GPIO2_ENABLE);
- /* gpio2 208/9/10/11 are inputs */
- au_writel((1<<8) | (1<<9) | (1<<10) | (1<<11), GPIO2_DIR);
+ /* GPIO2 208/9/10/11 are inputs */
+ au_writel((1 << 8) | (1 << 9) | (1 << 10) | (1 << 11), GPIO2_DIR);
- /* turn off power */
- au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<14))|(1<<30), GPIO2_OUTPUT);
+ /* Turn off power */
+ au_writel((au_readl(GPIO2_PINSTATE) & ~(1 << 14)) | (1 << 30),
+ GPIO2_OUTPUT);
#endif
-
#ifdef CONFIG_PCI
#if defined(__MIPSEB__)
- au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG);
+ au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
#else
au_writel(0xf, Au1500_PCI_CFG);
#endif
diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/au1000/xxs1500/init.c
index 24fc6e1..b849bf5 100644
--- a/arch/mips/au1000/xxs1500/init.c
+++ b/arch/mips/au1000/xxs1500/init.c
@@ -2,9 +2,8 @@
* BRIEF MODULE DESCRIPTION
* XXS1500 board setup
*
- * Copyright 2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -45,8 +44,8 @@
unsigned long memsize;
prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
@@ -54,6 +53,6 @@
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = simple_strtol(memsize_str, NULL, 0);
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/xxs1500/irqmap.c b/arch/mips/au1000/xxs1500/irqmap.c
index dd6e3d1..edf06ed 100644
--- a/arch/mips/au1000/xxs1500/irqmap.c
+++ b/arch/mips/au1000/xxs1500/irqmap.c
@@ -31,7 +31,7 @@
#include <asm/mach-au1x00/au1000.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma2rh/markeins/setup.c
index 82f9e901..62bfb45 100644
--- a/arch/mips/emma2rh/markeins/setup.c
+++ b/arch/mips/emma2rh/markeins/setup.c
@@ -76,7 +76,9 @@
while (1) ;
}
-static unsigned long clock[4] = { 166500000, 187312500, 199800000, 210600000 };
+static unsigned long __initdata emma2rh_clock[4] = {
+ 166500000, 187312500, 199800000, 210600000
+};
static unsigned int __init detect_bus_frequency(unsigned long rtc_base)
{
@@ -85,7 +87,8 @@
/* detect from boot strap */
reg = emma2rh_in32(EMMA2RH_BHIF_STRAP_0);
reg = (reg >> 4) & 0x3;
- return clock[reg];
+
+ return emma2rh_clock[reg];
}
void __init plat_time_init(void)
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 45545be..cc02440 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -56,9 +56,9 @@
obj-$(CONFIG_MIPS_CMP) += smp-cmp.o
obj-$(CONFIG_CPU_MIPSR2) += spram.o
-obj-$(CONFIG_MIPS_APSP_KSPD) += kspd.o
obj-$(CONFIG_MIPS_VPE_LOADER) += vpe.o
obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o
+obj-$(CONFIG_MIPS_APSP_KSPD) += kspd.o
obj-$(CONFIG_I8259) += i8259.o
obj-$(CONFIG_IRQ_CPU) += irq_cpu.o
diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c
index 77db347..9fdd8bc 100644
--- a/arch/mips/kernel/binfmt_elfn32.c
+++ b/arch/mips/kernel/binfmt_elfn32.c
@@ -54,6 +54,7 @@
#include <linux/module.h>
#include <linux/elfcore.h>
#include <linux/compat.h>
+#include <linux/math64.h>
#define elf_prstatus elf_prstatus32
struct elf_prstatus32
@@ -102,8 +103,8 @@
* one divide.
*/
u64 nsec = (u64)jiffies * TICK_NSEC;
- long rem;
- value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &rem);
+ u32 rem;
+ value->tv_sec = div_u64_rem(nsec, NSEC_PER_SEC, &rem);
value->tv_usec = rem / NSEC_PER_USEC;
}
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index 08f4cd7..e1333d7 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -56,6 +56,7 @@
#include <linux/module.h>
#include <linux/elfcore.h>
#include <linux/compat.h>
+#include <linux/math64.h>
#define elf_prstatus elf_prstatus32
struct elf_prstatus32
@@ -104,8 +105,8 @@
* one divide.
*/
u64 nsec = (u64)jiffies * TICK_NSEC;
- long rem;
- value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &rem);
+ u32 rem;
+ value->tv_sec = div_u64_rem(nsec, NSEC_PER_SEC, &rem);
value->tv_usec = rem / NSEC_PER_USEC;
}
diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c
index a1b48af..02b7713 100644
--- a/arch/mips/kernel/cpu-bugs64.c
+++ b/arch/mips/kernel/cpu-bugs64.c
@@ -38,7 +38,7 @@
".endr\n\t"
".set pop"
:
- : GCC_IMM_ASM(align), GCC_IMM_ASM(mod));
+ : GCC_IMM_ASM() (align), GCC_IMM_ASM() (mod));
}
static inline void mult_sh_align_mod(long *v1, long *v2, long *w,
diff --git a/arch/mips/kernel/irixelf.c b/arch/mips/kernel/irixelf.c
index 290d8e3..469c723 100644
--- a/arch/mips/kernel/irixelf.c
+++ b/arch/mips/kernel/irixelf.c
@@ -578,7 +578,7 @@
* process and the system, here we map the page and fill the
* structure
*/
-static void irix_map_prda_page(void)
+static int irix_map_prda_page(void)
{
unsigned long v;
struct prda *pp;
@@ -587,8 +587,8 @@
v = do_brk(PRDA_ADDRESS, PAGE_SIZE);
up_write(¤t->mm->mmap_sem);
- if (v < 0)
- return;
+ if (v != PRDA_ADDRESS)
+ return v; /* v must be an error code */
pp = (struct prda *) v;
pp->prda_sys.t_pid = task_pid_vnr(current);
@@ -596,6 +596,8 @@
pp->prda_sys.t_rpid = task_pid_vnr(current);
/* We leave the rest set to zero */
+
+ return 0;
}
@@ -781,7 +783,8 @@
* IRIX maps a page at 0x200000 which holds some system
* information. Programs depend on this.
*/
- irix_map_prda_page();
+ if (irix_map_prda_page())
+ goto out_free_dentry;
padzero(elf_bss);
diff --git a/arch/mips/kernel/irixioctl.c b/arch/mips/kernel/irixioctl.c
index 2bde200d..b39bdba 100644
--- a/arch/mips/kernel/irixioctl.c
+++ b/arch/mips/kernel/irixioctl.c
@@ -27,33 +27,6 @@
cc_t c_cc[NCCS];
};
-extern void start_tty(struct tty_struct *tty);
-static struct tty_struct *get_tty(int fd)
-{
- struct file *filp;
- struct tty_struct *ttyp = NULL;
-
- rcu_read_lock();
- filp = fcheck(fd);
- if(filp && filp->private_data) {
- ttyp = (struct tty_struct *) filp->private_data;
-
- if(ttyp->magic != TTY_MAGIC)
- ttyp =NULL;
- }
- rcu_read_unlock();
- return ttyp;
-}
-
-static struct tty_struct *get_real_tty(struct tty_struct *tp)
-{
- if (tp->driver->type == TTY_DRIVER_TYPE_PTY &&
- tp->driver->subtype == PTY_TYPE_MASTER)
- return tp->link;
- else
- return tp;
-}
-
asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg)
{
struct tty_struct *tp, *rtp;
@@ -146,34 +119,24 @@
error = sys_ioctl(fd, TIOCNOTTY, arg);
break;
- case 0x00007416:
+ case 0x00007416: {
+ pid_t pid;
#ifdef DEBUG_IOCTLS
printk("TIOCGSID, %08lx) ", arg);
#endif
- tp = get_tty(fd);
- if(!tp) {
- error = -EINVAL;
- break;
- }
- rtp = get_real_tty(tp);
-#ifdef DEBUG_IOCTLS
- printk("rtp->session=%d ", rtp->session);
-#endif
- error = put_user(rtp->session, (unsigned long __user *) arg);
+ old_fs = get_fs(); set_fs(get_ds());
+ error = sys_ioctl(fd, TIOCGSID, (unsigned long)&pid);
+ set_fs(old_fs);
+ if (!error)
+ error = put_user(pid, (unsigned long __user *) arg);
break;
-
+ }
case 0x746e:
/* TIOCSTART, same effect as hitting ^Q */
#ifdef DEBUG_IOCTLS
printk("TIOCSTART, %08lx) ", arg);
#endif
- tp = get_tty(fd);
- if(!tp) {
- error = -EINVAL;
- break;
- }
- rtp = get_real_tty(tp);
- start_tty(rtp);
+ error = sys_ioctl(fd, TCXONC, TCOON);
break;
case 0x20006968:
diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c
index 998c4ef..b0591ae 100644
--- a/arch/mips/kernel/kspd.c
+++ b/arch/mips/kernel/kspd.c
@@ -20,6 +20,7 @@
#include <linux/sched.h>
#include <linux/unistd.h>
#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/fs.h>
#include <linux/syscalls.h>
#include <linux/workqueue.h>
@@ -256,7 +257,7 @@
vcwd = vpe_getcwd(tclimit);
- /* change to the cwd of the process that loaded the SP program */
+ /* change to cwd of the process that loaded the SP program */
old_fs = get_fs();
set_fs(KERNEL_DS);
sys_chdir(vcwd);
@@ -322,6 +323,9 @@
set >>= 1;
}
}
+
+ /* Put daemon cwd back to root to avoid umount problems */
+ sys_chdir("/");
}
static int channel_open = 0;
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index 0233798..b88f1c1 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -72,6 +72,15 @@
static irqreturn_t rtlx_interrupt(int irq, void *dev_id)
{
int i;
+ unsigned int flags, vpeflags;
+
+ /* Ought not to be strictly necessary for SMTC builds */
+ local_irq_save(flags);
+ vpeflags = dvpe();
+ set_c0_status(0x100 << MIPS_CPU_RTLX_IRQ);
+ irq_enable_hazard();
+ evpe(vpeflags);
+ local_irq_restore(flags);
for (i = 0; i < RTLX_CHANNELS; i++) {
wake_up(&channel_wqs[i].lx_queue);
@@ -108,7 +117,8 @@
static int rtlx_init(struct rtlx_info *rtlxi)
{
if (rtlxi->id != RTLX_ID) {
- printk(KERN_ERR "no valid RTLX id at 0x%p 0x%lx\n", rtlxi, rtlxi->id);
+ printk(KERN_ERR "no valid RTLX id at 0x%p 0x%lx\n",
+ rtlxi, rtlxi->id);
return -ENOEXEC;
}
@@ -162,18 +172,17 @@
if (rtlx == NULL) {
if( (p = vpe_get_shared(tclimit)) == NULL) {
- if (can_sleep) {
- __wait_event_interruptible(channel_wqs[index].lx_queue,
- (p = vpe_get_shared(tclimit)),
- ret);
- if (ret)
- goto out_fail;
- } else {
- printk(KERN_DEBUG "No SP program loaded, and device "
- "opened with O_NONBLOCK\n");
- ret = -ENOSYS;
+ if (can_sleep) {
+ __wait_event_interruptible(channel_wqs[index].lx_queue,
+ (p = vpe_get_shared(tclimit)), ret);
+ if (ret)
goto out_fail;
- }
+ } else {
+ printk(KERN_DEBUG "No SP program loaded, and device "
+ "opened with O_NONBLOCK\n");
+ ret = -ENOSYS;
+ goto out_fail;
+ }
}
smp_rmb();
@@ -182,7 +191,9 @@
DEFINE_WAIT(wait);
for (;;) {
- prepare_to_wait(&channel_wqs[index].lx_queue, &wait, TASK_INTERRUPTIBLE);
+ prepare_to_wait(
+ &channel_wqs[index].lx_queue,
+ &wait, TASK_INTERRUPTIBLE);
smp_rmb();
if (*p != NULL)
break;
@@ -195,7 +206,7 @@
}
finish_wait(&channel_wqs[index].lx_queue, &wait);
} else {
- printk(" *vpe_get_shared is NULL. "
+ pr_err(" *vpe_get_shared is NULL. "
"Has an SP program been loaded?\n");
ret = -ENOSYS;
goto out_fail;
@@ -203,8 +214,9 @@
}
if ((unsigned int)*p < KSEG0) {
- printk(KERN_WARNING "vpe_get_shared returned an invalid pointer "
- "maybe an error code %d\n", (int)*p);
+ printk(KERN_WARNING "vpe_get_shared returned an "
+ "invalid pointer maybe an error code %d\n",
+ (int)*p);
ret = -ENOSYS;
goto out_fail;
}
@@ -232,6 +244,10 @@
int rtlx_release(int index)
{
+ if (rtlx == NULL) {
+ pr_err("rtlx_release() with null rtlx\n");
+ return 0;
+ }
rtlx->channel[index].lx_state = RTLX_STATE_UNUSED;
return 0;
}
@@ -251,8 +267,8 @@
int ret = 0;
__wait_event_interruptible(channel_wqs[index].lx_queue,
- chan->lx_read != chan->lx_write || sp_stopping,
- ret);
+ (chan->lx_read != chan->lx_write) ||
+ sp_stopping, ret);
if (ret)
return ret;
@@ -282,7 +298,9 @@
unsigned int rtlx_write_poll(int index)
{
struct rtlx_channel *chan = &rtlx->channel[index];
- return write_spacefree(chan->rt_read, chan->rt_write, chan->buffer_size);
+
+ return write_spacefree(chan->rt_read, chan->rt_write,
+ chan->buffer_size);
}
ssize_t rtlx_read(int index, void __user *buff, size_t count)
@@ -344,8 +362,8 @@
rt_read = rt->rt_read;
/* total number of bytes to copy */
- count = min(count,
- (size_t)write_spacefree(rt_read, rt->rt_write, rt->buffer_size));
+ count = min(count, (size_t)write_spacefree(rt_read, rt->rt_write,
+ rt->buffer_size));
/* first bit from write pointer to the end of the buffer, or count */
fl = min(count, (size_t) rt->buffer_size - rt->rt_write);
@@ -514,6 +532,11 @@
if (cpu_has_vint)
set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch);
+ else {
+ pr_err("APRP RTLX init on non-vectored-interrupt processor\n");
+ err = -ENODEV;
+ goto out_chrdev;
+ }
rtlx_irq.dev_id = rtlx;
setup_irq(rtlx_irq_num, &rtlx_irq);
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 39f3dfe..c6a063b 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -331,6 +331,7 @@
/*
* Determine low and high memory ranges
*/
+ max_pfn = max_low_pfn;
if (max_low_pfn > PFN_DOWN(HIGHMEM_START)) {
#ifdef CONFIG_HIGHMEM
highstart_pfn = PFN_DOWN(HIGHMEM_START);
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 33780cc..63370cd 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -87,8 +87,8 @@
__cpuinit void register_smp_ops(struct plat_smp_ops *ops)
{
- if (ops)
- printk(KERN_WARNING "Overriding previous set SMP ops\n");
+ if (mp_ops)
+ printk(KERN_WARNING "Overriding previously set SMP ops\n");
mp_ops = ops;
}
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 39804c5..2794501 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -269,7 +269,7 @@
* This means you must tell Linux to use less memory than you
* physically have, for example by passing a mem= boot argument.
*/
- addr = pfn_to_kaddr(max_pfn);
+ addr = pfn_to_kaddr(max_low_pfn);
memset(addr, 0, len);
#else
/* simple grab some mem for now */
@@ -781,10 +781,15 @@
/* take system out of configuration state */
clear_c0_mvpcontrol(MVPCONTROL_VPC);
+ /*
+ * SMTC/SMVP kernels manage VPE enable independently,
+ * but uniprocessor kernels need to turn it on, even
+ * if that wasn't the pre-dvpe() state.
+ */
#ifdef CONFIG_SMP
- evpe(EVPE_ENABLE);
-#else
evpe(vpeflags);
+#else
+ evpe(EVPE_ENABLE);
#endif
emt(dmt_flag);
local_irq_restore(flags);
@@ -840,7 +845,7 @@
/* Sanity checks against insmoding binaries or wrong arch,
weird elf version */
- if (memcmp(hdr->e_ident, ELFMAG, 4) != 0
+ if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0
|| (hdr->e_type != ET_REL && hdr->e_type != ET_EXEC)
|| !elf_check_arch(hdr)
|| hdr->e_shentsize != sizeof(*sechdrs)) {
@@ -947,12 +952,14 @@
struct elf_phdr *phdr = (struct elf_phdr *) ((char *)hdr + hdr->e_phoff);
for (i = 0; i < hdr->e_phnum; i++) {
- if (phdr->p_type != PT_LOAD)
- continue;
-
- memcpy((void *)phdr->p_paddr, (char *)hdr + phdr->p_offset, phdr->p_filesz);
- memset((void *)phdr->p_paddr + phdr->p_filesz, 0, phdr->p_memsz - phdr->p_filesz);
- phdr++;
+ if (phdr->p_type == PT_LOAD) {
+ memcpy((void *)phdr->p_paddr,
+ (char *)hdr + phdr->p_offset,
+ phdr->p_filesz);
+ memset((void *)phdr->p_paddr + phdr->p_filesz,
+ 0, phdr->p_memsz - phdr->p_filesz);
+ }
+ phdr++;
}
for (i = 0; i < hdr->e_shnum; i++) {
@@ -1107,7 +1114,7 @@
return -ENODEV;
hdr = (Elf_Ehdr *) v->pbuffer;
- if (memcmp(hdr->e_ident, ELFMAG, 4) == 0) {
+ if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) == 0) {
if (vpe_elfload(v) >= 0) {
vpe_run(v);
} else {
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index 10dd2af..8f2cd8eda 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -116,4 +116,3 @@
EXPORT_SYMBOL(__kunmap);
EXPORT_SYMBOL(__kmap_atomic);
EXPORT_SYMBOL(__kunmap_atomic);
-EXPORT_SYMBOL(__kmap_atomic_to_page);
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index da8cbb6..b40df7d 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -281,7 +281,7 @@
static void reset_counters(void *arg)
{
- int counters = (int)arg;
+ int counters = (int)(long)arg;
switch (counters) {
case 4:
w_c0_perfctrl3(0);
@@ -313,7 +313,7 @@
if (!cpu_has_mipsmt_pertccounters)
counters = counters_total_to_per_cpu(counters);
#endif
- on_each_cpu(reset_counters, (void *)counters, 0, 1);
+ on_each_cpu(reset_counters, (void *)(long)counters, 0, 1);
op_model_mipsxx_ops.num_counters = counters;
switch (current_cpu_type()) {
@@ -382,7 +382,7 @@
int counters = op_model_mipsxx_ops.num_counters;
counters = counters_per_cpu_to_total(counters);
- on_each_cpu(reset_counters, (void *)counters, 0, 1);
+ on_each_cpu(reset_counters, (void *)(long)counters, 0, 1);
perf_irq = save_perf_irq;
}
diff --git a/arch/mips/pci/fixup-au1000.c b/arch/mips/pci/fixup-au1000.c
index 00c36c9..e2ddfc4 100644
--- a/arch/mips/pci/fixup-au1000.c
+++ b/arch/mips/pci/fixup-au1000.c
@@ -1,10 +1,9 @@
/*
* BRIEF MODULE DESCRIPTION
- * Board specific pci fixups.
+ * Board specific PCI fixups.
*
- * Copyright 2001-2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001-2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c
index 1314bd5..9a57c5a 100644
--- a/arch/mips/pci/ops-au1000.c
+++ b/arch/mips/pci/ops-au1000.c
@@ -1,10 +1,9 @@
/*
* BRIEF MODULE DESCRIPTION
- * Alchemy/AMD Au1x00 PCI support.
+ * Alchemy/AMD Au1xx0 PCI support.
*
- * Copyright 2001-2003, 2007 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001-2003, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* Support for all devices (greater than 16) added by David Gathright.
*
@@ -28,6 +27,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
@@ -36,9 +36,9 @@
#include <asm/mach-au1x00/au1000.h>
-#undef DEBUG
-#ifdef DEBUG
-#define DBG(x...) printk(x)
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(x...) printk(KERN_DEBUG x)
#else
#define DBG(x...)
#endif
@@ -46,7 +46,6 @@
#define PCI_ACCESS_READ 0
#define PCI_ACCESS_WRITE 1
-
int (*board_pci_idsel)(unsigned int devsel, int assert);
void mod_wired_entry(int entry, unsigned long entrylo0,
@@ -92,10 +91,9 @@
}
static int config_access(unsigned char access_type, struct pci_bus *bus,
- unsigned int dev_fn, unsigned char where,
- u32 * data)
+ unsigned int dev_fn, unsigned char where, u32 *data)
{
-#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 )
+#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
unsigned int device = PCI_SLOT(dev_fn);
unsigned int function = PCI_FUNC(dev_fn);
unsigned long offset, status;
@@ -114,38 +112,36 @@
Au1500_PCI_STATCMD);
au_sync_udelay(1);
- /* Allow board vendors to implement their own off-chip idsel.
+ /*
+ * Allow board vendors to implement their own off-chip IDSEL.
* If it doesn't succeed, may as well bail out at this point.
*/
- if (board_pci_idsel) {
- if (board_pci_idsel(device, 1) == 0) {
- *data = 0xffffffff;
- local_irq_restore(flags);
- return -1;
- }
+ if (board_pci_idsel && board_pci_idsel(device, 1) == 0) {
+ *data = 0xffffffff;
+ local_irq_restore(flags);
+ return -1;
}
- /* setup the config window */
- if (bus->number == 0) {
- cfg_base = ((1<<device)<<11);
- } else {
- cfg_base = 0x80000000 | (bus->number<<16) | (device<<11);
- }
+ /* Setup the config window */
+ if (bus->number == 0)
+ cfg_base = (1 << device) << 11;
+ else
+ cfg_base = 0x80000000 | (bus->number << 16) | (device << 11);
- /* setup the lower bits of the 36 bit address */
- offset = (function << 8) | (where & ~0x3);
- /* pick up any address that falls below the page mask */
+ /* Setup the lower bits of the 36-bit address */
+ offset = (function << 8) | (where & ~0x3);
+ /* Pick up any address that falls below the page mask */
offset |= cfg_base & ~PAGE_MASK;
- /* page boundary */
+ /* Page boundary */
cfg_base = cfg_base & PAGE_MASK;
/*
* To improve performance, if the current device is the same as
* the last device accessed, we don't touch the TLB.
*/
- entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7;
- entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7;
+ entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7;
+ entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7;
if ((entryLo0 != last_entryLo0) || (entryLo1 != last_entryLo1)) {
mod_wired_entry(pci_cfg_wired_entry, entryLo0, entryLo1,
(unsigned long)pci_cfg_vm->addr, PM_4K);
@@ -153,38 +149,37 @@
last_entryLo1 = entryLo1;
}
- if (access_type == PCI_ACCESS_WRITE) {
+ if (access_type == PCI_ACCESS_WRITE)
au_writel(*data, (int)(pci_cfg_vm->addr + offset));
- } else {
+ else
*data = au_readl((int)(pci_cfg_vm->addr + offset));
- }
+
au_sync_udelay(2);
- DBG("cfg_access %d bus->number %d dev %d at %x *data %x conf %x\n",
- access_type, bus->number, device, where, *data, offset);
+ DBG("cfg_access %d bus->number %u dev %u at %x *data %x conf %lx\n",
+ access_type, bus->number, device, where, *data, offset);
- /* check master abort */
+ /* Check master abort */
status = au_readl(Au1500_PCI_STATCMD);
- if (status & (1<<29)) {
+ if (status & (1 << 29)) {
*data = 0xffffffff;
error = -1;
DBG("Au1x Master Abort\n");
} else if ((status >> 28) & 0xf) {
- DBG("PCI ERR detected: device %d, status %x\n", device, ((status >> 28) & 0xf));
+ DBG("PCI ERR detected: device %u, status %lx\n",
+ device, (status >> 28) & 0xf);
- /* clear errors */
+ /* Clear errors */
au_writel(status & 0xf000ffff, Au1500_PCI_STATCMD);
*data = 0xffffffff;
error = -1;
}
- /* Take away the idsel.
- */
- if (board_pci_idsel) {
+ /* Take away the IDSEL. */
+ if (board_pci_idsel)
(void)board_pci_idsel(device, 0);
- }
local_irq_restore(flags);
return error;
@@ -192,7 +187,7 @@
}
static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
- int where, u8 * val)
+ int where, u8 *val)
{
u32 data;
int ret;
@@ -206,9 +201,8 @@
return ret;
}
-
static int read_config_word(struct pci_bus *bus, unsigned int devfn,
- int where, u16 * val)
+ int where, u16 *val)
{
u32 data;
int ret;
@@ -221,7 +215,7 @@
}
static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
- int where, u32 * val)
+ int where, u32 *val)
{
int ret;
@@ -229,9 +223,8 @@
return ret;
}
-static int
-write_config_byte(struct pci_bus *bus, unsigned int devfn, int where,
- u8 val)
+static int write_config_byte(struct pci_bus *bus, unsigned int devfn,
+ int where, u8 val)
{
u32 data = 0;
@@ -239,7 +232,7 @@
return -1;
data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
+ (val << ((where & 3) << 3));
if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
return -1;
@@ -247,9 +240,8 @@
return PCIBIOS_SUCCESSFUL;
}
-static int
-write_config_word(struct pci_bus *bus, unsigned int devfn, int where,
- u16 val)
+static int write_config_word(struct pci_bus *bus, unsigned int devfn,
+ int where, u16 val)
{
u32 data = 0;
@@ -257,18 +249,16 @@
return -1;
data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
+ (val << ((where & 3) << 3));
if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
return -1;
-
return PCIBIOS_SUCCESSFUL;
}
-static int
-write_config_dword(struct pci_bus *bus, unsigned int devfn, int where,
- u32 val)
+static int write_config_dword(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 val)
{
if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val))
return -1;
@@ -277,18 +267,20 @@
}
static int config_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 * val)
+ int where, int size, u32 *val)
{
switch (size) {
case 1: {
u8 _val;
int rc = read_config_byte(bus, devfn, where, &_val);
+
*val = _val;
return rc;
}
- case 2: {
+ case 2: {
u16 _val;
int rc = read_config_word(bus, devfn, where, &_val);
+
*val = _val;
return rc;
}
@@ -310,7 +302,6 @@
}
}
-
struct pci_ops au1x_pci_ops = {
config_read,
config_write
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c b/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c
index ab96a2d..11769b5 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c
@@ -126,9 +126,6 @@
struct hwbutton_interrupt *hirq = data;
unsigned long cic_ext = *CIC_EXT_CFG_REG;
- if (irq != hirq->irq)
- return IRQ_NONE;
-
if (CIC_EXT_IS_ACTIVE_HI(cic_ext, hirq->eirq)) {
/* Interrupt: pin is now HI */
CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq);
@@ -164,7 +161,7 @@
*CIC_EXT_CFG_REG = cic_ext;
return request_irq(hirq->irq, hwbutton_handler, IRQF_DISABLED,
- hirq->name, (void *)hirq);
+ hirq->name, hirq);
}
static int __init msp_hwbutton_setup(void)
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index 25d3baf..9cebc9e 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -158,7 +158,7 @@
}
}
-unsigned int rt_timer_irq;
+int rt_timer_irq;
static irqreturn_t hub_rt_counter_handler(int irq, void *dev_id)
{
@@ -219,7 +219,7 @@
static void __init hub_rt_clock_event_global_init(void)
{
- unsigned int irq;
+ int irq;
do {
smp_wmb();
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index 6a6409a..e856218d 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -186,17 +186,6 @@
Say Y here if you are building a kernel for a desktop, embedded
or real-time system. Say N if you are unsure.
-config PREEMPT_BKL
- bool "Preempt The Big Kernel Lock"
- depends on PREEMPT
- default y
- help
- This option reduces the latency of the kernel by making the
- big kernel lock preemptible.
-
- Say Y here if you are building a kernel for a desktop system.
- Say N if you are unsure.
-
config MN10300_CURRENT_IN_E2
bool "Hold current task address in E2 register"
default y
diff --git a/arch/mn10300/boot/install.sh b/arch/mn10300/boot/install.sh
index 072951c..abba309 100644
--- a/arch/mn10300/boot/install.sh
+++ b/arch/mn10300/boot/install.sh
@@ -26,42 +26,42 @@
install -c -m 0755 $2 $4/vmlinuz
install -c -m 0755 $5 $4/boot.rom
install -c -m 0755 -d $4/../usr/include/linux
-cd $TOPDIR/include/linux
+cd ${srctree}/include/linux
for i in `find . -maxdepth 1 -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/linux
done
install -c -m 0755 -d $4/../usr/include/linux/byteorder
-cd $TOPDIR/include/linux/byteorder
+cd ${srctree}/include/linux/byteorder
for i in `find . -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/linux/byteorder
done
install -c -m 0755 -d $4/../usr/include/linux/lockd
-cd $TOPDIR/include/linux/lockd
+cd ${srctree}/include/linux/lockd
for i in `find . -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/linux/lockd
done
install -c -m 0755 -d $4/../usr/include/linux/netfilter_ipv4
-cd $TOPDIR/include/linux/netfilter_ipv4
+cd ${srctree}/include/linux/netfilter_ipv4
for i in `find . -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/linux/netfilter_ipv4
done
install -c -m 0755 -d $4/../usr/include/linux/nfsd
-cd $TOPDIR/include/linux/nfsd
+cd ${srctree}/include/linux/nfsd
for i in `find . -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/linux/nfsd/$i
done
install -c -m 0755 -d $4/../usr/include/linux/raid
-cd $TOPDIR/include/linux/raid
+cd ${srctree}/include/linux/raid
for i in `find . -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/linux/raid
done
install -c -m 0755 -d $4/../usr/include/linux/sunrpc
-cd $TOPDIR/include/linux/sunrpc
+cd ${srctree}/include/linux/sunrpc
for i in `find . -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/linux/sunrpc
done
install -c -m 0755 -d $4/../usr/include/asm
-cd $TOPDIR/include/asm
+cd ${srctree}/include/asm
for i in `find . -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/asm
done
diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c
index 5f17a1e..bca5a84 100644
--- a/arch/mn10300/kernel/sys_mn10300.c
+++ b/arch/mn10300/kernel/sys_mn10300.c
@@ -29,23 +29,6 @@
#define MIN_MAP_ADDR PAGE_SIZE /* minimum fixed mmap address */
/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way Unix traditionally does this, though.
- */
-asmlinkage long sys_pipe(unsigned long __user *fildes)
-{
- int fd[2];
- int error;
-
- error = do_pipe(fd);
- if (!error) {
- if (copy_to_user(fildes, fd, 2 * sizeof(int)))
- error = -EFAULT;
- }
- return error;
-}
-
-/*
* memory mapping syscall
*/
asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c
index 4f58921..71b3195 100644
--- a/arch/parisc/kernel/sys_parisc.c
+++ b/arch/parisc/kernel/sys_parisc.c
@@ -33,19 +33,6 @@
#include <linux/utsname.h>
#include <linux/personality.h>
-int sys_pipe(int __user *fildes)
-{
- int fd[2];
- int error;
-
- error = do_pipe(fd);
- if (!error) {
- if (copy_to_user(fildes, fd, 2*sizeof(int)))
- error = -EFAULT;
- }
- return error;
-}
-
static unsigned long get_unshared_area(unsigned long addr, unsigned long len)
{
struct vm_area_struct *vma;
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 1f01284..b0ed709 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -606,7 +606,7 @@
int i, j;
for (i = 0; i < npmem_ranges; i++) {
- zl = node_zonelist(i);
+ zl = node_zonelist(i, 0);
for (j = 0; j < MAX_NR_ZONES; j++) {
struct zoneref *z;
struct zone *zone;
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 1f2f1e0..bba234e 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -21,6 +21,7 @@
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
+ pci2 = &pci2;
};
cpus {
@@ -105,7 +106,7 @@
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <28 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
@@ -322,4 +323,24 @@
};
};
};
+
+ pci2: pcie@e0009000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8641-pcie";
+ reg = <0xe0009000 0x00001000>;
+ ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xe2000000 0 0x00100000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0x0000 0 0 1 &mpic 4 1
+ 0x0000 0 0 2 &mpic 5 1
+ 0x0000 0 0 3 &mpic 6 1
+ 0x0000 0 0 4 &mpic 7 1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <25 2>;
+ clock-frequency = <33333333>;
+ };
};
diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts
index a1ae4d6..72d6756 100644
--- a/arch/powerpc/boot/dts/sequoia.dts
+++ b/arch/powerpc/boot/dts/sequoia.dts
@@ -342,9 +342,14 @@
/* Outbound ranges, one memory and one IO,
* later cannot be changed. Chip supports a second
* IO range but we don't use it for now
+ * From the 440EPx user manual:
+ * PCI 1 Memory 1 8000 0000 1 BFFF FFFF 1GB
+ * I/O 1 E800 0000 1 E800 FFFF 64KB
+ * I/O 1 E880 0000 1 EBFF FFFF 56MB
*/
- ranges = <02000000 0 80000000 1 80000000 0 10000000
- 01000000 0 00000000 1 e8000000 0 00100000>;
+ ranges = <02000000 0 80000000 1 80000000 0 40000000
+ 01000000 0 00000000 1 e8000000 0 00010000
+ 01000000 0 00000000 1 e8800000 0 03800000>;
/* Inbound 2GB range starting at 0 */
dma-ranges = <42000000 0 0 0 0 0 80000000>;
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 7a64c56..71d79e4 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 11:07:04 2008
+# Linux kernel version: 2.6.25
+# Mon Apr 28 12:39:10 2008
#
CONFIG_PPC64=y
@@ -30,6 +30,9 @@
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -73,8 +76,6 @@
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -161,7 +162,6 @@
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_CELLEB is not set
CONFIG_PPC_PS3=y
#
@@ -181,6 +181,7 @@
CONFIG_PPC_CELL=y
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
#
# Cell Broadband Engine options
@@ -205,9 +206,9 @@
#
# Kernel options
#
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
@@ -221,7 +222,6 @@
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_IOMMU_VMERGE is not set
CONFIG_IOMMU_HELPER=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -255,6 +255,7 @@
CONFIG_ARCH_MEMORY_PROBE=y
# CONFIG_PPC_HAS_HASH_64K is not set
# CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -272,7 +273,9 @@
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
#
# Networking
@@ -292,7 +295,7 @@
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
@@ -301,6 +304,7 @@
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
@@ -332,8 +336,10 @@
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -392,8 +398,6 @@
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -507,6 +511,7 @@
# CONFIG_LIBERTAS is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_HOSTAP is not set
#
@@ -578,6 +583,7 @@
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
+# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
@@ -641,6 +647,7 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
@@ -761,10 +768,6 @@
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
-#
-
-#
# ALSA SoC audio for Freescale SOCs
#
@@ -849,6 +852,7 @@
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -893,10 +897,6 @@
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -986,7 +986,6 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1059,9 +1058,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
@@ -1071,6 +1071,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1078,6 +1079,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1093,12 +1095,16 @@
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1121,51 +1127,81 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SALSA20=m
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index d14cebf..2346d27 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -105,6 +105,9 @@
systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
$(call cmd,systbl_chk)
+
+ifeq ($(CONFIG_PPC_MERGE),y)
+
$(obj)/built-in.o: prom_init_check
quiet_cmd_prom_init_check = CALL $<
@@ -114,4 +117,7 @@
prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o
$(call cmd,prom_init_check)
+endif
+
+
clean-files := vmlinux.lds
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index 9f93777..d8f0329 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -16,7 +16,6 @@
#include <asm/mmu.h>
#include <asm/pgtable.h>
#include <asm/io.h>
-#include <asm/prom.h>
#include <asm/processor.h>
#include <asm/udbg.h>
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 36080d4..e44d553 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1208,6 +1208,18 @@
.machine_check = machine_check_4xx,
.platform = "ppc405",
},
+ { /* default match */
+ .pvr_mask = 0x00000000,
+ .pvr_value = 0x00000000,
+ .cpu_name = "(generic 40x PPC)",
+ .cpu_features = CPU_FTRS_40X,
+ .cpu_user_features = PPC_FEATURE_32 |
+ PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .machine_check = machine_check_4xx,
+ .platform = "ppc405",
+ }
#endif /* CONFIG_40x */
#ifdef CONFIG_44x
@@ -1421,8 +1433,18 @@
.machine_check = machine_check_440A,
.platform = "ppc440",
},
+ { /* default match */
+ .pvr_mask = 0x00000000,
+ .pvr_value = 0x00000000,
+ .cpu_name = "(generic 44x PPC)",
+ .cpu_features = CPU_FTRS_44X,
+ .cpu_user_features = COMMON_USER_BOOKE,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .machine_check = machine_check_4xx,
+ .platform = "ppc440",
+ }
#endif /* CONFIG_44x */
-#ifdef CONFIG_FSL_BOOKE
#ifdef CONFIG_E200
{ /* e200z5 */
.pvr_mask = 0xfff00000,
@@ -1451,7 +1473,20 @@
.machine_check = machine_check_e200,
.platform = "ppc5554",
},
-#elif defined(CONFIG_E500)
+ { /* default match */
+ .pvr_mask = 0x00000000,
+ .pvr_value = 0x00000000,
+ .cpu_name = "(generic E200 PPC)",
+ .cpu_features = CPU_FTRS_E200,
+ .cpu_user_features = COMMON_USER_BOOKE |
+ PPC_FEATURE_HAS_EFP_SINGLE |
+ PPC_FEATURE_UNIFIED_CACHE,
+ .dcache_bsize = 32,
+ .machine_check = machine_check_e200,
+ .platform = "ppc5554",
+ }
+#endif /* CONFIG_E200 */
+#ifdef CONFIG_E500
{ /* e500 */
.pvr_mask = 0xffff0000,
.pvr_value = 0x80200000,
@@ -1487,20 +1522,20 @@
.machine_check = machine_check_e500,
.platform = "ppc8548",
},
-#endif
-#endif
-#if !CLASSIC_PPC
{ /* default match */
.pvr_mask = 0x00000000,
.pvr_value = 0x00000000,
- .cpu_name = "(generic PPC)",
- .cpu_features = CPU_FTRS_GENERIC_32,
- .cpu_user_features = PPC_FEATURE_32,
+ .cpu_name = "(generic E500 PPC)",
+ .cpu_features = CPU_FTRS_E500,
+ .cpu_user_features = COMMON_USER_BOOKE |
+ PPC_FEATURE_HAS_SPE_COMP |
+ PPC_FEATURE_HAS_EFP_SINGLE_COMP,
.icache_bsize = 32,
.dcache_bsize = 32,
+ .machine_check = machine_check_e500,
.platform = "powerpc",
}
-#endif /* !CLASSIC_PPC */
+#endif /* CONFIG_E500 */
#endif /* CONFIG_PPC32 */
};
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index b84ec6a..c2b9dc4 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -653,7 +653,14 @@
rlwimi r10, r11, 0, 26, 26 /* UX = HWEXEC & USER */
rlwimi r12, r10, 0, 26, 31 /* Insert static perms */
- rlwinm r12, r12, 0, 20, 15 /* Clear U0-U3 */
+
+ /*
+ * Clear U0-U3 and WL1 IL1I IL1D IL2I IL2D bits which are added
+ * on newer 440 cores like the 440x6 used on AMCC 460EX/460GT (see
+ * include/asm-powerpc/pgtable-ppc32.h for details).
+ */
+ rlwinm r12, r12, 0, 20, 10
+
tlbwe r12, r13, PPC44x_TLB_ATTRIB /* Write ATTRIB */
/* Done...restore registers and get out of here.
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 024805e..25e84c0 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -1517,10 +1517,6 @@
addi r2,r2,0x4000
add r2,r2,r26
- /* Set initial ptr to current */
- LOAD_REG_IMMEDIATE(r4, init_task)
- std r4,PACACURRENT(r13)
-
/* Do very early kernel initializations, including initial hash table,
* stab and slb setup before we turn on relocation. */
diff --git a/arch/powerpc/kernel/isa-bridge.c b/arch/powerpc/kernel/isa-bridge.c
index 289af34..4d5731b 100644
--- a/arch/powerpc/kernel/isa-bridge.c
+++ b/arch/powerpc/kernel/isa-bridge.c
@@ -108,9 +108,6 @@
if (size > 0x10000)
size = 0x10000;
- printk(KERN_ERR "no ISA IO ranges or unexpected isa range, "
- "mapping 64k\n");
-
__ioremap_at(phb_io_base_phys, (void *)ISA_IO_BASE,
size, _PAGE_NO_CACHE|_PAGE_GUARDED);
return;
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 25e3fd8..098fd96 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -170,6 +170,8 @@
void __init early_setup(unsigned long dt_ptr)
{
+ /* -------- printk is _NOT_ safe to use here ! ------- */
+
/* Fill in any unititialised pacas */
initialise_pacas();
@@ -179,12 +181,14 @@
/* Assume we're on cpu 0 for now. Don't write to the paca yet! */
setup_paca(0);
- /* Enable early debugging if any specified (see udbg.h) */
- udbg_early_init();
-
/* Initialize lockdep early or else spinlocks will blow */
lockdep_init();
+ /* -------- printk is now safe to use ------- */
+
+ /* Enable early debugging if any specified (see udbg.h) */
+ udbg_early_init();
+
DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr);
/*
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index be35ffae..1457aa0 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -386,6 +386,8 @@
panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
#ifdef CONFIG_PPC64
paca[cpu].__current = p;
+ paca[cpu].kstack = (unsigned long) task_thread_info(p)
+ + THREAD_SIZE - STACK_FRAME_OVERHEAD;
#endif
current_set[cpu] = task_thread_info(p);
task_thread_info(p)->cpu = cpu;
diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c
index e722a4e..4fe69ca 100644
--- a/arch/powerpc/kernel/syscalls.c
+++ b/arch/powerpc/kernel/syscalls.c
@@ -136,23 +136,6 @@
return ret;
}
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-int sys_pipe(int __user *fildes)
-{
- int fd[2];
- int error;
-
- error = do_pipe(fd);
- if (!error) {
- if (copy_to_user(fildes, fd, 2*sizeof(int)))
- error = -EFAULT;
- }
- return error;
-}
-
static inline unsigned long do_mmap2(unsigned long addr, size_t len,
unsigned long prot, unsigned long flags,
unsigned long fd, unsigned long off, int shift)
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 3b26fbd6..73401e8 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -149,7 +149,7 @@
u64 tb_to_xs;
unsigned tb_to_us;
-#define TICKLEN_SCALE TICK_LENGTH_SHIFT
+#define TICKLEN_SCALE NTP_SCALE_SHIFT
u64 last_tick_len; /* units are ns / 2^TICKLEN_SCALE */
u64 ticklen_to_xs; /* 0.64 fraction */
@@ -1007,8 +1007,6 @@
vdso_data->stamp_xsec = (u64) xtime.tv_sec * XSEC_PER_SEC;
vdso_data->tb_to_xs = tb_to_xs;
- time_freq = 0;
-
write_sequnlock_irqrestore(&xtime_lock, flags);
/* Register the clocksource, if we're not running on iSeries */
diff --git a/arch/powerpc/kvm/booke_guest.c b/arch/powerpc/kvm/booke_guest.c
index 6d9884a..712d89a 100644
--- a/arch/powerpc/kvm/booke_guest.c
+++ b/arch/powerpc/kvm/booke_guest.c
@@ -49,6 +49,7 @@
{ "inst_emu", VCPU_STAT(emulated_inst_exits) },
{ "dec", VCPU_STAT(dec_exits) },
{ "ext_intr", VCPU_STAT(ext_intr_exits) },
+ { "halt_wakeup", VCPU_STAT(halt_wakeup) },
{ NULL }
};
@@ -338,6 +339,11 @@
}
break;
+ case BOOKE_INTERRUPT_FP_UNAVAIL:
+ kvmppc_queue_exception(vcpu, exit_nr);
+ r = RESUME_GUEST;
+ break;
+
case BOOKE_INTERRUPT_DATA_STORAGE:
vcpu->arch.dear = vcpu->arch.fault_dear;
vcpu->arch.esr = vcpu->arch.fault_esr;
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index bad40bd..777e0f3 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -36,13 +36,12 @@
int kvm_cpu_has_interrupt(struct kvm_vcpu *v)
{
- /* XXX implement me */
- return 0;
+ return !!(v->arch.pending_exceptions);
}
int kvm_arch_vcpu_runnable(struct kvm_vcpu *v)
{
- return 1;
+ return !(v->arch.msr & MSR_WE);
}
@@ -214,6 +213,11 @@
struct kvm_vcpu *vcpu = (struct kvm_vcpu *)data;
kvmppc_queue_exception(vcpu, BOOKE_INTERRUPT_DECREMENTER);
+
+ if (waitqueue_active(&vcpu->wq)) {
+ wake_up_interruptible(&vcpu->wq);
+ vcpu->stat.halt_wakeup++;
+ }
}
int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
@@ -339,6 +343,8 @@
int r;
sigset_t sigsaved;
+ vcpu_load(vcpu);
+
if (vcpu->sigset_active)
sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
@@ -363,12 +369,20 @@
if (vcpu->sigset_active)
sigprocmask(SIG_SETMASK, &sigsaved, NULL);
+ vcpu_put(vcpu);
+
return r;
}
int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu, struct kvm_interrupt *irq)
{
kvmppc_queue_exception(vcpu, BOOKE_INTERRUPT_EXTERNAL);
+
+ if (waitqueue_active(&vcpu->wq)) {
+ wake_up_interruptible(&vcpu->wq);
+ vcpu->stat.halt_wakeup++;
+ }
+
return 0;
}
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 4bb023f..c71d37d 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -10,6 +10,7 @@
obj-y := string.o alloc.o \
checksum_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_PPC32) += div64.o copy_32.o
+obj-$(CONFIG_HAS_IOMEM) += devres.o
endif
obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \
diff --git a/arch/powerpc/lib/devres.c b/arch/powerpc/lib/devres.c
new file mode 100644
index 0000000..292115d
--- /dev/null
+++ b/arch/powerpc/lib/devres.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/device.h> /* devres_*(), devm_ioremap_release() */
+#include <linux/io.h> /* ioremap_flags() */
+#include <linux/module.h> /* EXPORT_SYMBOL() */
+
+/**
+ * devm_ioremap_prot - Managed ioremap_flags()
+ * @dev: Generic device to remap IO address for
+ * @offset: BUS offset to map
+ * @size: Size of map
+ * @flags: Page flags
+ *
+ * Managed ioremap_prot(). Map is automatically unmapped on driver
+ * detach.
+ */
+void __iomem *devm_ioremap_prot(struct device *dev, resource_size_t offset,
+ size_t size, unsigned long flags)
+{
+ void __iomem **ptr, *addr;
+
+ ptr = devres_alloc(devm_ioremap_release, sizeof(*ptr), GFP_KERNEL);
+ if (!ptr)
+ return NULL;
+
+ addr = ioremap_flags(offset, size, flags);
+ if (addr) {
+ *ptr = addr;
+ devres_add(dev, ptr);
+ } else
+ devres_free(ptr);
+
+ return addr;
+}
+EXPORT_SYMBOL(devm_ioremap_prot);
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 906daed..cf8705e 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -30,7 +30,7 @@
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
-#define DBG(fmt...)
+#define DBG pr_debug
#endif
extern void slb_allocate_realmode(unsigned long ea);
@@ -44,13 +44,13 @@
slb_allocate_realmode(ea);
}
+#define slb_esid_mask(ssize) \
+ (((ssize) == MMU_SEGSIZE_256M)? ESID_MASK: ESID_MASK_1T)
+
static inline unsigned long mk_esid_data(unsigned long ea, int ssize,
unsigned long slot)
{
- unsigned long mask;
-
- mask = (ssize == MMU_SEGSIZE_256M)? ESID_MASK: ESID_MASK_1T;
- return (ea & mask) | SLB_ESID_V | slot;
+ return (ea & slb_esid_mask(ssize)) | SLB_ESID_V | slot;
}
#define slb_vsid_shift(ssize) \
@@ -279,8 +279,8 @@
patch_slb_encoding(slb_compare_rr_to_size,
mmu_slb_size);
- DBG("SLB: linear LLP = %04x\n", linear_llp);
- DBG("SLB: io LLP = %04x\n", io_llp);
+ DBG("SLB: linear LLP = %04lx\n", linear_llp);
+ DBG("SLB: io LLP = %04lx\n", io_llp);
}
get_paca()->stab_rr = SLB_NUM_BOLTED;
@@ -301,11 +301,16 @@
create_shadowed_slbe(VMALLOC_START, mmu_kernel_ssize, vflags, 1);
+ /* For the boot cpu, we're running on the stack in init_thread_union,
+ * which is in the first segment of the linear mapping, and also
+ * get_paca()->kstack hasn't been initialized yet.
+ * For secondary cpus, we need to bolt the kernel stack entry now.
+ */
slb_shadow_clear(2);
+ if (raw_smp_processor_id() != boot_cpuid &&
+ (get_paca()->kstack & slb_esid_mask(mmu_kernel_ssize)) > PAGE_OFFSET)
+ create_shadowed_slbe(get_paca()->kstack,
+ mmu_kernel_ssize, lflags, 2);
- /* We don't bolt the stack for the time being - we're in boot,
- * so the stack is in the bolted segment. By the time it goes
- * elsewhere, we'll call _switch() which will bolt in the new
- * one. */
asm volatile("isync":::"memory");
}
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 04f74f9..5bf7df1 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -35,6 +35,7 @@
#include <linux/percpu.h>
#include <linux/types.h>
#include <linux/ioport.h>
+#include <linux/kernel_stat.h>
#include <asm/io.h>
#include <asm/pgtable.h>
@@ -231,6 +232,54 @@
"IBM,CBEA-Internal-Interrupt-Controller");
}
+extern int noirqdebug;
+
+static void handle_iic_irq(unsigned int irq, struct irq_desc *desc)
+{
+ const unsigned int cpu = smp_processor_id();
+
+ spin_lock(&desc->lock);
+
+ desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
+
+ /*
+ * If we're currently running this IRQ, or its disabled,
+ * we shouldn't process the IRQ. Mark it pending, handle
+ * the necessary masking and go out
+ */
+ if (unlikely((desc->status & (IRQ_INPROGRESS | IRQ_DISABLED)) ||
+ !desc->action)) {
+ desc->status |= IRQ_PENDING;
+ goto out_eoi;
+ }
+
+ kstat_cpu(cpu).irqs[irq]++;
+
+ /* Mark the IRQ currently in progress.*/
+ desc->status |= IRQ_INPROGRESS;
+
+ do {
+ struct irqaction *action = desc->action;
+ irqreturn_t action_ret;
+
+ if (unlikely(!action))
+ goto out_eoi;
+
+ desc->status &= ~IRQ_PENDING;
+ spin_unlock(&desc->lock);
+ action_ret = handle_IRQ_event(irq, action);
+ if (!noirqdebug)
+ note_interrupt(irq, desc, action_ret);
+ spin_lock(&desc->lock);
+
+ } while ((desc->status & (IRQ_PENDING | IRQ_DISABLED)) == IRQ_PENDING);
+
+ desc->status &= ~IRQ_INPROGRESS;
+out_eoi:
+ desc->chip->eoi(irq);
+ spin_unlock(&desc->lock);
+}
+
static int iic_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
@@ -240,10 +289,10 @@
break;
case IIC_IRQ_TYPE_IOEXC:
set_irq_chip_and_handler(virq, &iic_ioexc_chip,
- handle_fasteoi_irq);
+ handle_iic_irq);
break;
default:
- set_irq_chip_and_handler(virq, &iic_chip, handle_fasteoi_irq);
+ set_irq_chip_and_handler(virq, &iic_chip, handle_iic_irq);
}
return 0;
}
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 6bab44b..70c6601 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -141,6 +141,10 @@
if (!test_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags))
out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESTART_DMA_COMMAND);
+ else {
+ set_bit(SPU_CONTEXT_FAULT_PENDING, &spu->flags);
+ mb();
+ }
}
static inline void spu_load_slb(struct spu *spu, int slbe, struct spu_slb *slb)
@@ -226,11 +230,13 @@
return 0;
}
- spu->class_0_pending = 0;
- spu->dar = ea;
- spu->dsisr = dsisr;
+ spu->class_1_dar = ea;
+ spu->class_1_dsisr = dsisr;
- spu->stop_callback(spu);
+ spu->stop_callback(spu, 1);
+
+ spu->class_1_dar = 0;
+ spu->class_1_dsisr = 0;
return 0;
}
@@ -318,11 +324,15 @@
stat = spu_int_stat_get(spu, 0) & mask;
spu->class_0_pending |= stat;
- spu->dsisr = spu_mfc_dsisr_get(spu);
- spu->dar = spu_mfc_dar_get(spu);
+ spu->class_0_dsisr = spu_mfc_dsisr_get(spu);
+ spu->class_0_dar = spu_mfc_dar_get(spu);
spin_unlock(&spu->register_lock);
- spu->stop_callback(spu);
+ spu->stop_callback(spu, 0);
+
+ spu->class_0_pending = 0;
+ spu->class_0_dsisr = 0;
+ spu->class_0_dar = 0;
spu_int_stat_clear(spu, 0, stat);
@@ -363,6 +373,9 @@
if (stat & CLASS1_LS_COMPARE_SUSPEND_ON_PUT_INTR)
;
+ spu->class_1_dsisr = 0;
+ spu->class_1_dar = 0;
+
return stat ? IRQ_HANDLED : IRQ_NONE;
}
@@ -396,10 +409,10 @@
spu->ibox_callback(spu);
if (stat & CLASS2_SPU_STOP_INTR)
- spu->stop_callback(spu);
+ spu->stop_callback(spu, 2);
if (stat & CLASS2_SPU_HALT_INTR)
- spu->stop_callback(spu);
+ spu->stop_callback(spu, 2);
if (stat & CLASS2_SPU_DMA_TAG_GROUP_COMPLETE_INTR)
spu->mfc_callback(spu);
diff --git a/arch/powerpc/platforms/cell/spu_priv1_mmio.c b/arch/powerpc/platforms/cell/spu_priv1_mmio.c
index 67fa724..906a0a2 100644
--- a/arch/powerpc/platforms/cell/spu_priv1_mmio.c
+++ b/arch/powerpc/platforms/cell/spu_priv1_mmio.c
@@ -28,6 +28,7 @@
#include <linux/io.h>
#include <linux/mutex.h>
#include <linux/device.h>
+#include <linux/sched.h>
#include <asm/spu.h>
#include <asm/spu_priv1.h>
@@ -75,8 +76,19 @@
static void cpu_affinity_set(struct spu *spu, int cpu)
{
- u64 target = iic_get_target_id(cpu);
- u64 route = target << 48 | target << 32 | target << 16;
+ u64 target;
+ u64 route;
+
+ if (nr_cpus_node(spu->node)) {
+ cpumask_t spumask = node_to_cpumask(spu->node);
+ cpumask_t cpumask = node_to_cpumask(cpu_to_node(cpu));
+
+ if (!cpus_intersects(spumask, cpumask))
+ return;
+ }
+
+ target = iic_get_target_id(cpu);
+ route = target << 48 | target << 32 | target << 16;
out_be64(&spu->priv1->int_route_RW, route);
}
diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c
index b962c3a..af116aa 100644
--- a/arch/powerpc/platforms/cell/spufs/coredump.c
+++ b/arch/powerpc/platforms/cell/spufs/coredump.c
@@ -22,6 +22,7 @@
#include <linux/elf.h>
#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/fs.h>
#include <linux/list.h>
#include <linux/module.h>
diff --git a/arch/powerpc/platforms/cell/spufs/fault.c b/arch/powerpc/platforms/cell/spufs/fault.c
index e46d300..f093a58 100644
--- a/arch/powerpc/platforms/cell/spufs/fault.c
+++ b/arch/powerpc/platforms/cell/spufs/fault.c
@@ -83,13 +83,18 @@
return 0;
if (stat & CLASS0_DMA_ALIGNMENT_INTR)
- spufs_handle_event(ctx, ctx->csa.dar, SPE_EVENT_DMA_ALIGNMENT);
+ spufs_handle_event(ctx, ctx->csa.class_0_dar,
+ SPE_EVENT_DMA_ALIGNMENT);
if (stat & CLASS0_INVALID_DMA_COMMAND_INTR)
- spufs_handle_event(ctx, ctx->csa.dar, SPE_EVENT_INVALID_DMA);
+ spufs_handle_event(ctx, ctx->csa.class_0_dar,
+ SPE_EVENT_INVALID_DMA);
if (stat & CLASS0_SPU_ERROR_INTR)
- spufs_handle_event(ctx, ctx->csa.dar, SPE_EVENT_SPE_ERROR);
+ spufs_handle_event(ctx, ctx->csa.class_0_dar,
+ SPE_EVENT_SPE_ERROR);
+
+ ctx->csa.class_0_pending = 0;
return -EIO;
}
@@ -119,8 +124,8 @@
* in time, we can still expect to get the same fault
* the immediately after the context restore.
*/
- ea = ctx->csa.dar;
- dsisr = ctx->csa.dsisr;
+ ea = ctx->csa.class_1_dar;
+ dsisr = ctx->csa.class_1_dsisr;
if (!(dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)))
return 0;
@@ -158,7 +163,7 @@
* time slicing will not preempt the context while the page fault
* handler is running. Context switch code removes mappings.
*/
- ctx->csa.dar = ctx->csa.dsisr = 0;
+ ctx->csa.class_1_dar = ctx->csa.class_1_dsisr = 0;
/*
* If we handled the fault successfully and are in runnable
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 0c32a05..f407b24 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -23,6 +23,7 @@
#include <linux/file.h>
#include <linux/fs.h>
+#include <linux/fsnotify.h>
#include <linux/backing-dev.h>
#include <linux/init.h>
#include <linux/ioctl.h>
@@ -223,7 +224,7 @@
parent = dir->d_parent->d_inode;
ctx = SPUFS_I(dir->d_inode)->i_ctx;
- mutex_lock(&parent->i_mutex);
+ mutex_lock_nested(&parent->i_mutex, I_MUTEX_PARENT);
ret = spufs_rmdir(parent, dir);
mutex_unlock(&parent->i_mutex);
WARN_ON(ret);
@@ -618,12 +619,15 @@
mode &= ~current->fs->umask;
if (flags & SPU_CREATE_GANG)
- return spufs_create_gang(nd->path.dentry->d_inode,
+ ret = spufs_create_gang(nd->path.dentry->d_inode,
dentry, nd->path.mnt, mode);
else
- return spufs_create_context(nd->path.dentry->d_inode,
+ ret = spufs_create_context(nd->path.dentry->d_inode,
dentry, nd->path.mnt, flags, mode,
filp);
+ if (ret >= 0)
+ fsnotify_mkdir(nd->path.dentry->d_inode, dentry);
+ return ret;
out_dput:
dput(dentry);
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index a9c35b7..b7493b8 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -11,7 +11,7 @@
#include "spufs.h"
/* interrupt-level stop callback function. */
-void spufs_stop_callback(struct spu *spu)
+void spufs_stop_callback(struct spu *spu, int irq)
{
struct spu_context *ctx = spu->ctx;
@@ -24,9 +24,19 @@
*/
if (ctx) {
/* Copy exception arguments into module specific structure */
- ctx->csa.class_0_pending = spu->class_0_pending;
- ctx->csa.dsisr = spu->dsisr;
- ctx->csa.dar = spu->dar;
+ switch(irq) {
+ case 0 :
+ ctx->csa.class_0_pending = spu->class_0_pending;
+ ctx->csa.class_0_dsisr = spu->class_0_dsisr;
+ ctx->csa.class_0_dar = spu->class_0_dar;
+ break;
+ case 1 :
+ ctx->csa.class_1_dsisr = spu->class_1_dsisr;
+ ctx->csa.class_1_dar = spu->class_1_dar;
+ break;
+ case 2 :
+ break;
+ }
/* ensure that the exception status has hit memory before a
* thread waiting on the context's stop queue is woken */
@@ -34,11 +44,6 @@
wake_up_all(&ctx->stop_wq);
}
-
- /* Clear callback arguments from spu structure */
- spu->class_0_pending = 0;
- spu->dsisr = 0;
- spu->dar = 0;
}
int spu_stopped(struct spu_context *ctx, u32 *stat)
@@ -56,7 +61,11 @@
if (!(*stat & SPU_STATUS_RUNNING) && (*stat & stopped))
return 1;
- dsisr = ctx->csa.dsisr;
+ dsisr = ctx->csa.class_0_dsisr;
+ if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED))
+ return 1;
+
+ dsisr = ctx->csa.class_1_dsisr;
if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED))
return 1;
@@ -294,7 +303,7 @@
u32 ls_pointer, npc;
void __iomem *ls;
long spu_ret;
- int ret, ret2;
+ int ret;
/* get syscall block from local store */
npc = ctx->ops->npc_read(ctx) & ~3;
@@ -316,11 +325,9 @@
if (spu_ret <= -ERESTARTSYS) {
ret = spu_handle_restartsys(ctx, &spu_ret, &npc);
}
- ret2 = spu_acquire(ctx);
+ mutex_lock(&ctx->state_mutex);
if (ret == -ERESTARTSYS)
return ret;
- if (ret2)
- return -EINTR;
}
/* need to re-get the ls, as it may have changed when we released the
@@ -343,13 +350,14 @@
if (mutex_lock_interruptible(&ctx->run_mutex))
return -ERESTARTSYS;
- spu_enable_spu(ctx);
ctx->event_return = 0;
ret = spu_acquire(ctx);
if (ret)
goto out_unlock;
+ spu_enable_spu(ctx);
+
spu_update_sched_info(ctx);
ret = spu_run_init(ctx, npc);
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 7298e7d..2e411f2 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -140,6 +140,9 @@
* if it is timesliced or preempted.
*/
ctx->cpus_allowed = current->cpus_allowed;
+
+ /* Save the current cpu id for spu interrupt routing. */
+ ctx->last_ran = raw_smp_processor_id();
}
void spu_update_sched_info(struct spu_context *ctx)
@@ -243,7 +246,6 @@
spu_switch_log_notify(spu, ctx, SWITCH_LOG_START, 0);
spu_restore(&ctx->csa, spu);
spu->timestamp = jiffies;
- spu_cpu_affinity_set(spu, raw_smp_processor_id());
spu_switch_notify(spu, ctx);
ctx->state = SPU_STATE_RUNNABLE;
@@ -657,7 +659,8 @@
victim->stats.invol_ctx_switch++;
spu->stats.invol_ctx_switch++;
- spu_add_to_rq(victim);
+ if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
+ spu_add_to_rq(victim);
mutex_unlock(&victim->state_mutex);
diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h
index 7312745..454c277 100644
--- a/arch/powerpc/platforms/cell/spufs/spufs.h
+++ b/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -121,6 +121,7 @@
cpumask_t cpus_allowed;
int policy;
int prio;
+ int last_ran;
/* statistics */
struct {
@@ -331,7 +332,7 @@
/* irq callback funcs. */
void spufs_ibox_callback(struct spu *spu);
void spufs_wbox_callback(struct spu *spu);
-void spufs_stop_callback(struct spu *spu);
+void spufs_stop_callback(struct spu *spu, int irq);
void spufs_mfc_callback(struct spu *spu);
void spufs_dma_callback(struct spu *spu, int type);
diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c
index d2a1249..3df9a36 100644
--- a/arch/powerpc/platforms/cell/spufs/switch.c
+++ b/arch/powerpc/platforms/cell/spufs/switch.c
@@ -132,6 +132,14 @@
spu_int_mask_set(spu, 2, 0ul);
eieio();
spin_unlock_irq(&spu->register_lock);
+
+ /*
+ * This flag needs to be set before calling synchronize_irq so
+ * that the update will be visible to the relevant handlers
+ * via a simple load.
+ */
+ set_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags);
+ clear_bit(SPU_CONTEXT_FAULT_PENDING, &spu->flags);
synchronize_irq(spu->irqs[0]);
synchronize_irq(spu->irqs[1]);
synchronize_irq(spu->irqs[2]);
@@ -166,9 +174,8 @@
/* Save, Step 7:
* Restore, Step 5:
* Set a software context switch pending flag.
+ * Done above in Step 3 - disable_interrupts().
*/
- set_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags);
- mb();
}
static inline void save_mfc_cntl(struct spu_state *csa, struct spu *spu)
@@ -186,20 +193,21 @@
MFC_CNTL_SUSPEND_COMPLETE);
/* fall through */
case MFC_CNTL_SUSPEND_COMPLETE:
- if (csa) {
+ if (csa)
csa->priv2.mfc_control_RW =
- MFC_CNTL_SUSPEND_MASK |
+ in_be64(&priv2->mfc_control_RW) |
MFC_CNTL_SUSPEND_DMA_QUEUE;
- }
break;
case MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION:
out_be64(&priv2->mfc_control_RW, MFC_CNTL_SUSPEND_DMA_QUEUE);
POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) &
MFC_CNTL_SUSPEND_DMA_STATUS_MASK) ==
MFC_CNTL_SUSPEND_COMPLETE);
- if (csa) {
- csa->priv2.mfc_control_RW = 0;
- }
+ if (csa)
+ csa->priv2.mfc_control_RW =
+ in_be64(&priv2->mfc_control_RW) &
+ ~MFC_CNTL_SUSPEND_DMA_QUEUE &
+ ~MFC_CNTL_SUSPEND_MASK;
break;
}
}
@@ -249,16 +257,21 @@
}
}
-static inline void save_mfc_decr(struct spu_state *csa, struct spu *spu)
+static inline void save_mfc_stopped_status(struct spu_state *csa,
+ struct spu *spu)
{
struct spu_priv2 __iomem *priv2 = spu->priv2;
+ const u64 mask = MFC_CNTL_DECREMENTER_RUNNING |
+ MFC_CNTL_DMA_QUEUES_EMPTY;
/* Save, Step 12:
* Read MFC_CNTL[Ds]. Update saved copy of
* CSA.MFC_CNTL[Ds].
+ *
+ * update: do the same with MFC_CNTL[Q].
*/
- csa->priv2.mfc_control_RW |=
- in_be64(&priv2->mfc_control_RW) & MFC_CNTL_DECREMENTER_RUNNING;
+ csa->priv2.mfc_control_RW &= ~mask;
+ csa->priv2.mfc_control_RW |= in_be64(&priv2->mfc_control_RW) & mask;
}
static inline void halt_mfc_decr(struct spu_state *csa, struct spu *spu)
@@ -462,7 +475,9 @@
* Restore, Step 14.
* Write MFC_CNTL[Pc]=1 (purge queue).
*/
- out_be64(&priv2->mfc_control_RW, MFC_CNTL_PURGE_DMA_REQUEST);
+ out_be64(&priv2->mfc_control_RW,
+ MFC_CNTL_PURGE_DMA_REQUEST |
+ MFC_CNTL_SUSPEND_MASK);
eieio();
}
@@ -725,10 +740,14 @@
/* Save, Step 48:
* Restore, Step 23.
* Change the software context switch pending flag
- * to context switch active.
+ * to context switch active. This implementation does
+ * not uses a switch active flag.
*
- * This implementation does not uses a switch active flag.
+ * Now that we have saved the mfc in the csa, we can add in the
+ * restart command if an exception occurred.
*/
+ if (test_bit(SPU_CONTEXT_FAULT_PENDING, &spu->flags))
+ csa->priv2.mfc_control_RW |= MFC_CNTL_RESTART_DMA_COMMAND;
clear_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags);
mb();
}
@@ -1690,6 +1709,13 @@
eieio();
}
+static inline void set_int_route(struct spu_state *csa, struct spu *spu)
+{
+ struct spu_context *ctx = spu->ctx;
+
+ spu_cpu_affinity_set(spu, ctx->last_ran);
+}
+
static inline void restore_other_spu_access(struct spu_state *csa,
struct spu *spu)
{
@@ -1721,15 +1747,15 @@
*/
out_be64(&priv2->mfc_control_RW, csa->priv2.mfc_control_RW);
eieio();
+
/*
- * FIXME: this is to restart a DMA that we were processing
- * before the save. better remember the fault information
- * in the csa instead.
+ * The queue is put back into the same state that was evident prior to
+ * the context switch. The suspend flag is added to the saved state in
+ * the csa, if the operational state was suspending or suspended. In
+ * this case, the code that suspended the mfc is responsible for
+ * continuing it. Note that SPE faults do not change the operational
+ * state of the spu.
*/
- if ((csa->priv2.mfc_control_RW & MFC_CNTL_SUSPEND_DMA_QUEUE_MASK)) {
- out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESTART_DMA_COMMAND);
- eieio();
- }
}
static inline void enable_user_access(struct spu_state *csa, struct spu *spu)
@@ -1788,7 +1814,7 @@
save_spu_runcntl(prev, spu); /* Step 9. */
save_mfc_sr1(prev, spu); /* Step 10. */
save_spu_status(prev, spu); /* Step 11. */
- save_mfc_decr(prev, spu); /* Step 12. */
+ save_mfc_stopped_status(prev, spu); /* Step 12. */
halt_mfc_decr(prev, spu); /* Step 13. */
save_timebase(prev, spu); /* Step 14. */
remove_other_spu_access(prev, spu); /* Step 15. */
@@ -2000,6 +2026,7 @@
check_ppuint_mb_stat(next, spu); /* Step 67. */
spu_invalidate_slbs(spu); /* Modified Step 68. */
restore_mfc_sr1(next, spu); /* Step 69. */
+ set_int_route(next, spu); /* NEW */
restore_other_spu_access(next, spu); /* Step 70. */
restore_spu_runcntl(next, spu); /* Step 71. */
restore_mfc_cntl(next, spu); /* Step 72. */
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index a14e5cd..e59634f 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -167,8 +167,8 @@
* ps3_private data.
*/
-int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
- unsigned int *virq)
+static int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
+ unsigned int *virq)
{
int result;
struct ps3_private *pd;
@@ -217,7 +217,7 @@
* Clears chip data and calls irq_dispose_mapping() for the virq.
*/
-int ps3_virq_destroy(unsigned int virq)
+static int ps3_virq_destroy(unsigned int virq)
{
const struct ps3_private *pd = get_irq_chip_data(virq);
diff --git a/arch/powerpc/platforms/pseries/scanlog.c b/arch/powerpc/platforms/pseries/scanlog.c
index bec3803..417eca7 100644
--- a/arch/powerpc/platforms/pseries/scanlog.c
+++ b/arch/powerpc/platforms/pseries/scanlog.c
@@ -55,11 +55,6 @@
dp = PDE(inode);
data = (unsigned int *)dp->data;
- if (!data) {
- printk(KERN_ERR "scanlog: read failed no data\n");
- return -EIO;
- }
-
if (count > RTAS_DATA_BUF_SIZE)
count = RTAS_DATA_BUF_SIZE;
@@ -146,11 +141,6 @@
struct proc_dir_entry *dp = PDE(inode);
unsigned int *data = (unsigned int *)dp->data;
- if (!data) {
- printk(KERN_ERR "scanlog: open failed no data\n");
- return -EIO;
- }
-
if (data[0] != 0) {
/* This imperfect test stops a second copy of the
* data (or a reset while data is being copied)
@@ -168,10 +158,6 @@
struct proc_dir_entry *dp = PDE(inode);
unsigned int *data = (unsigned int *)dp->data;
- if (!data) {
- printk(KERN_ERR "scanlog: release failed no data\n");
- return -EIO;
- }
data[0] = 0;
return 0;
@@ -200,12 +186,11 @@
if (!data)
goto err;
- ent = proc_create("ppc64/rtas/scan-log-dump", S_IRUSR, NULL,
- &scanlog_fops);
+ ent = proc_create_data("ppc64/rtas/scan-log-dump", S_IRUSR, NULL,
+ &scanlog_fops, data);
if (!ent)
goto err;
- ent->data = data;
proc_ppc64_scan_log_dump = ent;
return 0;
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 3d92037..a0fa4eb 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -176,6 +176,7 @@
/**
* fsl_rio_doorbell_send - Send a MPC85xx doorbell message
+ * @mport: RapidIO master port info
* @index: ID of RapidIO interface
* @destid: Destination ID of target device
* @data: 16-bit info field of RapidIO doorbell message
@@ -211,6 +212,7 @@
/**
* fsl_local_config_read - Generate a MPC85xx local config space read
+ * @mport: RapidIO master port info
* @index: ID of RapdiIO interface
* @offset: Offset into configuration space
* @len: Length (in bytes) of the maintenance transaction
@@ -232,6 +234,7 @@
/**
* fsl_local_config_write - Generate a MPC85xx local config space write
+ * @mport: RapidIO master port info
* @index: ID of RapdiIO interface
* @offset: Offset into configuration space
* @len: Length (in bytes) of the maintenance transaction
@@ -254,6 +257,7 @@
/**
* fsl_rio_config_read - Generate a MPC85xx read maintenance transaction
+ * @mport: RapidIO master port info
* @index: ID of RapdiIO interface
* @destid: Destination ID of transaction
* @hopcount: Number of hops to target device
@@ -295,6 +299,7 @@
/**
* fsl_rio_config_write - Generate a MPC85xx write maintenance transaction
+ * @mport: RapidIO master port info
* @index: ID of RapdiIO interface
* @destid: Destination ID of transaction
* @hopcount: Number of hops to target device
@@ -985,8 +990,8 @@
}
/**
- * fsl_rio_setup - Setup MPC85xx RapidIO interface
- * @fsl_rio_setup - Setup Freescale PowerPC RapidIO interface
+ * fsl_rio_setup - Setup Freescale PowerPC RapidIO interface
+ * @dev: of_device pointer
*
* Initializes MPC85xx RapidIO hardware interface, configures
* master port with system-specific info, and registers the
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 324c01b..3a7054e 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -389,8 +389,8 @@
}
gfar_data.phy_id = *id;
- snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%x",
- res.start);
+ snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%llx",
+ (unsigned long long)res.start);
of_node_put(phy);
of_node_put(mdio);
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 1814adb..b4a54c5 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -1387,28 +1387,59 @@
resource_size_t size = res->end - res->start + 1;
u64 sa;
- /* Calculate window size */
- sa = (0xffffffffffffffffull << ilog2(size));;
- if (res->flags & IORESOURCE_PREFETCH)
- sa |= 0x8;
+ if (port->endpoint) {
+ resource_size_t ep_addr = 0;
+ resource_size_t ep_size = 32 << 20;
- out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
- out_le32(mbase + PECFG_BAR0LMPA, RES_TO_U32_LOW(sa));
+ /* Currently we map a fixed 64MByte window to PLB address
+ * 0 (SDRAM). This should probably be configurable via a dts
+ * property.
+ */
- /* The setup of the split looks weird to me ... let's see if it works */
- out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
- out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
- out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
- out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
- out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
- out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
+ /* Calculate window size */
+ sa = (0xffffffffffffffffull << ilog2(ep_size));;
+
+ /* Setup BAR0 */
+ out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
+ out_le32(mbase + PECFG_BAR0LMPA, RES_TO_U32_LOW(sa) |
+ PCI_BASE_ADDRESS_MEM_TYPE_64);
+
+ /* Disable BAR1 & BAR2 */
+ out_le32(mbase + PECFG_BAR1MPA, 0);
+ out_le32(mbase + PECFG_BAR2HMPA, 0);
+ out_le32(mbase + PECFG_BAR2LMPA, 0);
+
+ out_le32(mbase + PECFG_PIM01SAH, RES_TO_U32_HIGH(sa));
+ out_le32(mbase + PECFG_PIM01SAL, RES_TO_U32_LOW(sa));
+
+ out_le32(mbase + PCI_BASE_ADDRESS_0, RES_TO_U32_LOW(ep_addr));
+ out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(ep_addr));
+ } else {
+ /* Calculate window size */
+ sa = (0xffffffffffffffffull << ilog2(size));;
+ if (res->flags & IORESOURCE_PREFETCH)
+ sa |= 0x8;
+
+ out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
+ out_le32(mbase + PECFG_BAR0LMPA, RES_TO_U32_LOW(sa));
+
+ /* The setup of the split looks weird to me ... let's see
+ * if it works
+ */
+ out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
+ out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
+ out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
+ out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
+ out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
+ out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
+
+ out_le32(mbase + PCI_BASE_ADDRESS_0, RES_TO_U32_LOW(res->start));
+ out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(res->start));
+ }
/* Enable inbound mapping */
out_le32(mbase + PECFG_PIMEN, 0x1);
- out_le32(mbase + PCI_BASE_ADDRESS_0, RES_TO_U32_LOW(res->start));
- out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(res->start));
-
/* Enable I/O, Mem, and Busmaster cycles */
out_le16(mbase + PCI_COMMAND,
in_le16(mbase + PCI_COMMAND) |
@@ -1422,13 +1453,8 @@
const int *bus_range;
int primary = 0, busses;
void __iomem *mbase = NULL, *cfg_data = NULL;
-
- /* XXX FIXME: Handle endpoint mode properly */
- if (port->endpoint) {
- printk(KERN_WARNING "PCIE%d: Port in endpoint mode !\n",
- port->index);
- return;
- }
+ const u32 *pval;
+ u32 val;
/* Check if primary bridge */
if (of_get_property(port->node, "primary", NULL))
@@ -1462,21 +1488,30 @@
hose->last_busno = hose->first_busno + busses;
}
- /* We map the external config space in cfg_data and the host config
- * space in cfg_addr. External space is 1M per bus, internal space
- * is 4K
+ if (!port->endpoint) {
+ /* Only map the external config space in cfg_data for
+ * PCIe root-complexes. External space is 1M per bus
+ */
+ cfg_data = ioremap(port->cfg_space.start +
+ (hose->first_busno + 1) * 0x100000,
+ busses * 0x100000);
+ if (cfg_data == NULL) {
+ printk(KERN_ERR "%s: Can't map external config space !",
+ port->node->full_name);
+ goto fail;
+ }
+ hose->cfg_data = cfg_data;
+ }
+
+ /* Always map the host config space in cfg_addr.
+ * Internal space is 4K
*/
- cfg_data = ioremap(port->cfg_space.start +
- (hose->first_busno + 1) * 0x100000,
- busses * 0x100000);
mbase = ioremap(port->cfg_space.start + 0x10000000, 0x1000);
- if (cfg_data == NULL || mbase == NULL) {
- printk(KERN_ERR "%s: Can't map config space !",
+ if (mbase == NULL) {
+ printk(KERN_ERR "%s: Can't map internal config space !",
port->node->full_name);
goto fail;
}
-
- hose->cfg_data = cfg_data;
hose->cfg_addr = mbase;
pr_debug("PCIE %s, bus %d..%d\n", port->node->full_name,
@@ -1489,12 +1524,14 @@
port->hose = hose;
mbase = (void __iomem *)hose->cfg_addr;
- /*
- * Set bus numbers on our root port
- */
- out_8(mbase + PCI_PRIMARY_BUS, hose->first_busno);
- out_8(mbase + PCI_SECONDARY_BUS, hose->first_busno + 1);
- out_8(mbase + PCI_SUBORDINATE_BUS, hose->last_busno);
+ if (!port->endpoint) {
+ /*
+ * Set bus numbers on our root port
+ */
+ out_8(mbase + PCI_PRIMARY_BUS, hose->first_busno);
+ out_8(mbase + PCI_SECONDARY_BUS, hose->first_busno + 1);
+ out_8(mbase + PCI_SUBORDINATE_BUS, hose->last_busno);
+ }
/*
* OMRs are already reset, also disable PIMs
@@ -1515,17 +1552,49 @@
ppc4xx_configure_pciex_PIMs(port, hose, mbase, &dma_window);
/* The root complex doesn't show up if we don't set some vendor
- * and device IDs into it. Those are the same bogus one that the
- * initial code in arch/ppc add. We might want to change that.
+ * and device IDs into it. The defaults below are the same bogus
+ * one that the initial code in arch/ppc had. This can be
+ * overwritten by setting the "vendor-id/device-id" properties
+ * in the pciex node.
*/
- out_le16(mbase + 0x200, 0xaaa0 + port->index);
- out_le16(mbase + 0x202, 0xbed0 + port->index);
- /* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
- out_le32(mbase + 0x208, 0x06040001);
+ /* Get the (optional) vendor-/device-id from the device-tree */
+ pval = of_get_property(port->node, "vendor-id", NULL);
+ if (pval) {
+ val = *pval;
+ } else {
+ if (!port->endpoint)
+ val = 0xaaa0 + port->index;
+ else
+ val = 0xeee0 + port->index;
+ }
+ out_le16(mbase + 0x200, val);
- printk(KERN_INFO "PCIE%d: successfully set as root-complex\n",
- port->index);
+ pval = of_get_property(port->node, "device-id", NULL);
+ if (pval) {
+ val = *pval;
+ } else {
+ if (!port->endpoint)
+ val = 0xbed0 + port->index;
+ else
+ val = 0xfed0 + port->index;
+ }
+ out_le16(mbase + 0x202, val);
+
+ if (!port->endpoint) {
+ /* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
+ out_le32(mbase + 0x208, 0x06040001);
+
+ printk(KERN_INFO "PCIE%d: successfully set as root-complex\n",
+ port->index);
+ } else {
+ /* Set Class Code to Processor/PPC */
+ out_le32(mbase + 0x208, 0x0b200001);
+
+ printk(KERN_INFO "PCIE%d: successfully set as endpoint\n",
+ port->index);
+ }
+
return;
fail:
if (hose)
@@ -1542,6 +1611,7 @@
const u32 *pval;
int portno;
unsigned int dcrs;
+ const char *val;
/* First, proceed to core initialization as we assume there's
* only one PCIe core in the system
@@ -1573,8 +1643,20 @@
}
port->sdr_base = *pval;
- /* XXX Currently, we only support root complex mode */
- port->endpoint = 0;
+ /* Check if device_type property is set to "pci" or "pci-endpoint".
+ * Resulting from this setup this PCIe port will be configured
+ * as root-complex or as endpoint.
+ */
+ val = of_get_property(port->node, "device_type", NULL);
+ if (!strcmp(val, "pci-endpoint")) {
+ port->endpoint = 1;
+ } else if (!strcmp(val, "pci")) {
+ port->endpoint = 0;
+ } else {
+ printk(KERN_ERR "PCIE: missing or incorrect device_type for %s\n",
+ np->full_name);
+ return;
+ }
/* Fetch config space registers address */
if (of_address_to_resource(np, 0, &port->cfg_space)) {
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index ba8eea2..b7aefd0 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -107,7 +107,7 @@
}
regs = ioremap(res.start, 32);
- printk(KERN_INFO "Xilinx intc at 0x%08X mapped to 0x%p\n",
+ printk(KERN_INFO "Xilinx intc at 0x%08LX mapped to 0x%p\n",
res.start, regs);
/* Setup interrupt controller */
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 52c7478..1702de9 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -2842,9 +2842,11 @@
DUMP_FIELD(spu, "0x%lx", ls_size);
DUMP_FIELD(spu, "0x%x", node);
DUMP_FIELD(spu, "0x%lx", flags);
- DUMP_FIELD(spu, "0x%lx", dar);
- DUMP_FIELD(spu, "0x%lx", dsisr);
DUMP_FIELD(spu, "%d", class_0_pending);
+ DUMP_FIELD(spu, "0x%lx", class_0_dar);
+ DUMP_FIELD(spu, "0x%lx", class_0_dsisr);
+ DUMP_FIELD(spu, "0x%lx", class_1_dar);
+ DUMP_FIELD(spu, "0x%lx", class_1_dsisr);
DUMP_FIELD(spu, "0x%lx", irqs[0]);
DUMP_FIELD(spu, "0x%lx", irqs[1]);
DUMP_FIELD(spu, "0x%lx", irqs[2]);
diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile
index 8df7f0e..2352d13 100644
--- a/arch/ppc/Makefile
+++ b/arch/ppc/Makefile
@@ -43,7 +43,7 @@
KBUILD_CFLAGS += $(cpu-as-y)
# Default to the common case.
-KBUILD_DEFCONFIG := common_defconfig
+KBUILD_DEFCONFIG := ebony_defconfig
head-y := arch/ppc/kernel/head.o
head-$(CONFIG_8xx) := arch/ppc/kernel/head_8xx.o
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index 16ac11c..602c268 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -24,6 +24,7 @@
#include <asm/checksum.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
#include <linux/adb.h>
#include <linux/cuda.h>
#include <linux/pmu.h>
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index bfddfde..51e8094 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -36,6 +36,7 @@
#include <asm/nvram.h>
#include <asm/xmon.h>
#include <asm/ocp.h>
+#include <asm/irq.h>
#define USES_PPC_SYS (defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \
defined(CONFIG_PPC_MPC52xx))
diff --git a/arch/ppc/platforms/residual.c b/arch/ppc/platforms/residual.c
index 18495e7..d687b0f 100644
--- a/arch/ppc/platforms/residual.c
+++ b/arch/ppc/platforms/residual.c
@@ -38,6 +38,7 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/pci.h>
+#include <linux/proc_fs.h>
#include <asm/sections.h>
#include <asm/mmu.h>
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 29a7940..1d03508 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -430,6 +430,13 @@
Select this option to enable the special message interface to
the cooperative memory management.
+config PAGE_STATES
+ bool "Unused page notification"
+ help
+ This enables the notification of unused pages to the
+ hypervisor. The ESSA instruction is used to do the states
+ changes between a page that has content and the unused state.
+
config VIRT_TIMER
bool "Virtual CPU timer support"
help
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 743d54f..d003a6e 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -121,7 +121,7 @@
lgfr %r3,%r3 # long
llgtr %r4,%r4 # long
llgfr %r5,%r5 # long
- jg sys_ptrace # branch to system call
+ jg compat_sys_ptrace # branch to system call
.globl sys32_alarm_wrapper
sys32_alarm_wrapper:
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index bdbb3bc..708cf9c 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -279,8 +279,6 @@
st %r2,SP_R2(%r15) # store return value (change R2 on stack)
sysc_return:
- tm SP_PSW+1(%r15),0x01 # returning to user ?
- bno BASED(sysc_restore)
tm __TI_flags+3(%r9),_TIF_WORK_SVC
bnz BASED(sysc_work) # there is work to do (signals etc.)
sysc_restore:
@@ -312,6 +310,8 @@
# One of the work bits is on. Find out which one.
#
sysc_work:
+ tm SP_PSW+1(%r15),0x01 # returning to user ?
+ bno BASED(sysc_restore)
tm __TI_flags+3(%r9),_TIF_MCCK_PENDING
bo BASED(sysc_mcck_pending)
tm __TI_flags+3(%r9),_TIF_NEED_RESCHED
@@ -602,12 +602,6 @@
la %r2,SP_PTREGS(%r15) # address of register-save area
basr %r14,%r1 # branch to standard irq handler
io_return:
- tm SP_PSW+1(%r15),0x01 # returning to user ?
-#ifdef CONFIG_PREEMPT
- bno BASED(io_preempt) # no -> check for preemptive scheduling
-#else
- bno BASED(io_restore) # no-> skip resched & signal
-#endif
tm __TI_flags+3(%r9),_TIF_WORK_INT
bnz BASED(io_work) # there is work to do (signals etc.)
io_restore:
@@ -629,10 +623,18 @@
.long 0, io_restore_trace + 0x80000000
#endif
-#ifdef CONFIG_PREEMPT
-io_preempt:
+#
+# switch to kernel stack, then check the TIF bits
+#
+io_work:
+ tm SP_PSW+1(%r15),0x01 # returning to user ?
+#ifndef CONFIG_PREEMPT
+ bno BASED(io_restore) # no-> skip resched & signal
+#else
+ bnz BASED(io_work_user) # no -> check for preemptive scheduling
+ # check for preemptive scheduling
icm %r0,15,__TI_precount(%r9)
- bnz BASED(io_restore)
+ bnz BASED(io_restore) # preemption disabled
l %r1,SP_R15(%r15)
s %r1,BASED(.Lc_spsize)
mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15)
@@ -646,10 +648,7 @@
br %r1 # call schedule
#endif
-#
-# switch to kernel stack, then check the TIF bits
-#
-io_work:
+io_work_user:
l %r1,__LC_KERNEL_STACK
s %r1,BASED(.Lc_spsize)
mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15)
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index 5a4a7bc..fee1017 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -271,8 +271,6 @@
stg %r2,SP_R2(%r15) # store return value (change R2 on stack)
sysc_return:
- tm SP_PSW+1(%r15),0x01 # returning to user ?
- jno sysc_restore
tm __TI_flags+7(%r9),_TIF_WORK_SVC
jnz sysc_work # there is work to do (signals etc.)
sysc_restore:
@@ -304,6 +302,8 @@
# One of the work bits is on. Find out which one.
#
sysc_work:
+ tm SP_PSW+1(%r15),0x01 # returning to user ?
+ jno sysc_restore
tm __TI_flags+7(%r9),_TIF_MCCK_PENDING
jo sysc_mcck_pending
tm __TI_flags+7(%r9),_TIF_NEED_RESCHED
@@ -585,12 +585,6 @@
la %r2,SP_PTREGS(%r15) # address of register-save area
brasl %r14,do_IRQ # call standard irq handler
io_return:
- tm SP_PSW+1(%r15),0x01 # returning to user ?
-#ifdef CONFIG_PREEMPT
- jno io_preempt # no -> check for preemptive scheduling
-#else
- jno io_restore # no-> skip resched & signal
-#endif
tm __TI_flags+7(%r9),_TIF_WORK_INT
jnz io_work # there is work to do (signals etc.)
io_restore:
@@ -612,10 +606,41 @@
.quad 0, io_restore_trace
#endif
-#ifdef CONFIG_PREEMPT
-io_preempt:
+#
+# There is work todo, we need to check if we return to userspace, then
+# check, if we are in SIE, if yes leave it
+#
+io_work:
+ tm SP_PSW+1(%r15),0x01 # returning to user ?
+#ifndef CONFIG_PREEMPT
+#if defined(CONFIG_KVM) || defined(CONFIG_KVM_MODULE)
+ jnz io_work_user # yes -> no need to check for SIE
+ la %r1, BASED(sie_opcode) # we return to kernel here
+ lg %r2, SP_PSW+8(%r15)
+ clc 0(2,%r1), 0(%r2) # is current instruction = SIE?
+ jne io_restore # no-> return to kernel
+ lg %r1, SP_PSW+8(%r15) # yes-> add 4 bytes to leave SIE
+ aghi %r1, 4
+ stg %r1, SP_PSW+8(%r15)
+ j io_restore # return to kernel
+#else
+ jno io_restore # no-> skip resched & signal
+#endif
+#else
+ jnz io_work_user # yes -> do resched & signal
+#if defined(CONFIG_KVM) || defined(CONFIG_KVM_MODULE)
+ la %r1, BASED(sie_opcode)
+ lg %r2, SP_PSW+8(%r15)
+ clc 0(2,%r1), 0(%r2) # is current instruction = SIE?
+ jne 0f # no -> leave PSW alone
+ lg %r1, SP_PSW+8(%r15) # yes-> add 4 bytes to leave SIE
+ aghi %r1, 4
+ stg %r1, SP_PSW+8(%r15)
+0:
+#endif
+ # check for preemptive scheduling
icm %r0,15,__TI_precount(%r9)
- jnz io_restore
+ jnz io_restore # preemption is disabled
# switch to kernel stack
lg %r1,SP_R15(%r15)
aghi %r1,-SP_SIZE
@@ -629,10 +654,7 @@
jg preempt_schedule_irq
#endif
-#
-# switch to kernel stack, then check TIF bits
-#
-io_work:
+io_work_user:
lg %r1,__LC_KERNEL_STACK
aghi %r1,-SP_SIZE
mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15)
@@ -653,6 +675,11 @@
j io_restore
io_work_done:
+#if defined(CONFIG_KVM) || defined(CONFIG_KVM_MODULE)
+sie_opcode:
+ .long 0xb2140000
+#endif
+
#
# _TIF_MCCK_PENDING is set, call handler
#
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 7f42701..35827b9 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -292,8 +292,7 @@
return 0;
}
-static int
-do_ptrace_normal(struct task_struct *child, long request, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
ptrace_area parea;
int copied, ret;
@@ -529,35 +528,19 @@
return 0;
}
-static int
-do_ptrace_emu31(struct task_struct *child, long request, long addr, long data)
+long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
+ compat_ulong_t caddr, compat_ulong_t cdata)
{
- unsigned int tmp; /* 4 bytes !! */
+ unsigned long addr = caddr;
+ unsigned long data = cdata;
ptrace_area_emu31 parea;
int copied, ret;
switch (request) {
- case PTRACE_PEEKTEXT:
- case PTRACE_PEEKDATA:
- /* read word at location addr. */
- copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
- if (copied != sizeof(tmp))
- return -EIO;
- return put_user(tmp, (unsigned int __force __user *) data);
-
case PTRACE_PEEKUSR:
/* read the word at location addr in the USER area. */
return peek_user_emu31(child, addr, data);
- case PTRACE_POKETEXT:
- case PTRACE_POKEDATA:
- /* write the word at location addr. */
- tmp = data;
- copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 1);
- if (copied != sizeof(tmp))
- return -EIO;
- return 0;
-
case PTRACE_POKEUSR:
/* write the word at location addr in the USER area */
return poke_user_emu31(child, addr, data);
@@ -587,82 +570,11 @@
copied += sizeof(unsigned int);
}
return 0;
- case PTRACE_GETEVENTMSG:
- return put_user((__u32) child->ptrace_message,
- (unsigned int __force __user *) data);
- case PTRACE_GETSIGINFO:
- if (child->last_siginfo == NULL)
- return -EINVAL;
- return copy_siginfo_to_user32((compat_siginfo_t
- __force __user *) data,
- child->last_siginfo);
- case PTRACE_SETSIGINFO:
- if (child->last_siginfo == NULL)
- return -EINVAL;
- return copy_siginfo_from_user32(child->last_siginfo,
- (compat_siginfo_t
- __force __user *) data);
}
- return ptrace_request(child, request, addr, data);
+ return compat_ptrace_request(child, request, addr, data);
}
#endif
-long arch_ptrace(struct task_struct *child, long request, long addr, long data)
-{
- switch (request) {
- case PTRACE_SYSCALL:
- /* continue and stop at next (return from) syscall */
- case PTRACE_CONT:
- /* restart after signal. */
- if (!valid_signal(data))
- return -EIO;
- if (request == PTRACE_SYSCALL)
- set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
- else
- clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
- child->exit_code = data;
- /* make sure the single step bit is not set. */
- user_disable_single_step(child);
- wake_up_process(child);
- return 0;
-
- case PTRACE_KILL:
- /*
- * make the child exit. Best I can do is send it a sigkill.
- * perhaps it should be put in the status that it wants to
- * exit.
- */
- if (child->exit_state == EXIT_ZOMBIE) /* already dead */
- return 0;
- child->exit_code = SIGKILL;
- /* make sure the single step bit is not set. */
- user_disable_single_step(child);
- wake_up_process(child);
- return 0;
-
- case PTRACE_SINGLESTEP:
- /* set the trap flag. */
- if (!valid_signal(data))
- return -EIO;
- clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
- child->exit_code = data;
- user_enable_single_step(child);
- /* give it a chance to run. */
- wake_up_process(child);
- return 0;
-
- /* Do requests that differ for 31/64 bit */
- default:
-#ifdef CONFIG_COMPAT
- if (test_thread_flag(TIF_31BIT))
- return do_ptrace_emu31(child, request, addr, data);
-#endif
- return do_ptrace_normal(child, request, addr, data);
- }
- /* Not reached. */
- return -EIO;
-}
-
asmlinkage void
syscall_trace(struct pt_regs *regs, int entryexit)
{
diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c
index 988d0d6..5fdb799 100644
--- a/arch/s390/kernel/sys_s390.c
+++ b/arch/s390/kernel/sys_s390.c
@@ -32,23 +32,6 @@
#include <asm/uaccess.h>
#include "entry.h"
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way Unix traditionally does this, though.
- */
-asmlinkage long sys_pipe(unsigned long __user *fildes)
-{
- int fd[2];
- int error;
-
- error = do_pipe(fd);
- if (!error) {
- if (copy_to_user(fildes, fd, 2*sizeof(int)))
- error = -EFAULT;
- }
- return error;
-}
-
/* common code for old and new mmaps */
static inline long do_mmap2(
unsigned long addr, unsigned long len,
diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig
index 1761b74..e051cad 100644
--- a/arch/s390/kvm/Kconfig
+++ b/arch/s390/kvm/Kconfig
@@ -22,7 +22,6 @@
select PREEMPT_NOTIFIERS
select ANON_INODES
select S390_SWITCH_AMODE
- select PREEMPT
---help---
Support hosting paravirtualized guest machines using the SIE
virtualization capability on the mainframe. This should work
diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index 349581a..47a0b64 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -105,6 +105,9 @@
static int handle_noop(struct kvm_vcpu *vcpu)
{
switch (vcpu->arch.sie_block->icptcode) {
+ case 0x0:
+ vcpu->stat.exit_null++;
+ break;
case 0x10:
vcpu->stat.exit_external_request++;
break;
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 98d1e73..0ac36a6 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -31,6 +31,7 @@
struct kvm_stats_debugfs_item debugfs_entries[] = {
{ "userspace_handled", VCPU_STAT(exit_userspace) },
+ { "exit_null", VCPU_STAT(exit_null) },
{ "exit_validity", VCPU_STAT(exit_validity) },
{ "exit_stop_request", VCPU_STAT(exit_stop_request) },
{ "exit_external_request", VCPU_STAT(exit_external_request) },
@@ -221,10 +222,6 @@
vcpu->arch.guest_fpregs.fpc &= FPC_VALID_MASK;
restore_fp_regs(&vcpu->arch.guest_fpregs);
restore_access_regs(vcpu->arch.guest_acrs);
-
- if (signal_pending(current))
- atomic_set_mask(CPUSTAT_STOP_INT,
- &vcpu->arch.sie_block->cpuflags);
}
void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
diff --git a/arch/s390/mm/Makefile b/arch/s390/mm/Makefile
index fb988a4..2a74581 100644
--- a/arch/s390/mm/Makefile
+++ b/arch/s390/mm/Makefile
@@ -5,3 +5,4 @@
obj-y := init.o fault.o extmem.o mmap.o vmem.o pgtable.o
obj-$(CONFIG_CMM) += cmm.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
+obj-$(CONFIG_PAGE_STATES) += page-states.o
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index fa31de6..29f3a63 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -126,6 +126,9 @@
/* clear the zero-page */
memset(empty_zero_page, 0, PAGE_SIZE);
+ /* Setup guest page hinting */
+ cmma_init();
+
/* this will put all low memory onto the freelists */
totalram_pages += free_all_bootmem();
diff --git a/arch/s390/mm/page-states.c b/arch/s390/mm/page-states.c
new file mode 100644
index 0000000..fc0ad73
--- /dev/null
+++ b/arch/s390/mm/page-states.c
@@ -0,0 +1,79 @@
+/*
+ * arch/s390/mm/page-states.c
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * Guest page hinting for unused pages.
+ *
+ * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#define ESSA_SET_STABLE 1
+#define ESSA_SET_UNUSED 2
+
+static int cmma_flag;
+
+static int __init cmma(char *str)
+{
+ char *parm;
+ parm = strstrip(str);
+ if (strcmp(parm, "yes") == 0 || strcmp(parm, "on") == 0) {
+ cmma_flag = 1;
+ return 1;
+ }
+ cmma_flag = 0;
+ if (strcmp(parm, "no") == 0 || strcmp(parm, "off") == 0)
+ return 1;
+ return 0;
+}
+
+__setup("cmma=", cmma);
+
+void __init cmma_init(void)
+{
+ register unsigned long tmp asm("0") = 0;
+ register int rc asm("1") = -EOPNOTSUPP;
+
+ if (!cmma_flag)
+ return;
+ asm volatile(
+ " .insn rrf,0xb9ab0000,%1,%1,0,0\n"
+ "0: la %0,0\n"
+ "1:\n"
+ EX_TABLE(0b,1b)
+ : "+&d" (rc), "+&d" (tmp));
+ if (rc)
+ cmma_flag = 0;
+}
+
+void arch_free_page(struct page *page, int order)
+{
+ int i, rc;
+
+ if (!cmma_flag)
+ return;
+ for (i = 0; i < (1 << order); i++)
+ asm volatile(".insn rrf,0xb9ab0000,%0,%1,%2,0"
+ : "=&d" (rc)
+ : "a" ((page_to_pfn(page) + i) << PAGE_SHIFT),
+ "i" (ESSA_SET_UNUSED));
+}
+
+void arch_alloc_page(struct page *page, int order)
+{
+ int i, rc;
+
+ if (!cmma_flag)
+ return;
+ for (i = 0; i < (1 << order); i++)
+ asm volatile(".insn rrf,0xb9ab0000,%0,%1,%2,0"
+ : "=&d" (rc)
+ : "a" ((page_to_pfn(page) + i) << PAGE_SHIFT),
+ "i" (ESSA_SET_STABLE));
+}
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 6a679c3..8a68160 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -448,14 +448,6 @@
Select Dreamcast if configuring for a SEGA Dreamcast.
More information at <http://www.linux-sh.org>
-config SH_MPC1211
- bool "Interface MPC1211"
- depends on CPU_SUBTYPE_SH7751 && BROKEN
- help
- CTP/PCI-SH02 is a CPU module computer that is produced
- by Interface Corporation.
- More information at <http://www.interface.co.jp>
-
config SH_SH03
bool "Interface CTP/PCI-SH03"
depends on CPU_SUBTYPE_SH7751
@@ -657,8 +649,7 @@
endmenu
config ISA_DMA_API
- def_bool y
- depends on SH_MPC1211
+ bool
menu "Kernel features"
@@ -666,7 +657,7 @@
config KEXEC
bool "kexec system call (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ depends on SUPERH32 && EXPERIMENTAL
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
@@ -683,7 +674,7 @@
config CRASH_DUMP
bool "kernel crash dumps (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ depends on SUPERH32 && EXPERIMENTAL
help
Generate crash dump after being started by kexec.
This should be normally only set in special crash dump kernels
@@ -763,7 +754,7 @@
config ZERO_PAGE_OFFSET
hex "Zero page offset"
- default "0x00004000" if SH_MPC1211 || SH_SH03
+ default "0x00004000" if SH_SH03
default "0x00010000" if PAGE_SIZE_64KB
default "0x00002000" if PAGE_SIZE_8KB
default "0x00001000"
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index d9d28f9..0d2ef1e 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -7,6 +7,7 @@
config SH_STANDARD_BIOS
bool "Use LinuxSH standard BIOS"
+ depends on SUPERH32
help
Say Y here if your target has the gdb-sh-stub
package from www.m17n.org (or any conforming standard LinuxSH BIOS)
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index bb06f83..8050b03 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -110,7 +110,6 @@
machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE) += se/7721
machdir-$(CONFIG_SH_HP6XX) += hp6xx
machdir-$(CONFIG_SH_DREAMCAST) += dreamcast
-machdir-$(CONFIG_SH_MPC1211) += mpc1211
machdir-$(CONFIG_SH_SH03) += sh03
machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear
machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d
diff --git a/arch/sh/boards/mpc1211/Makefile b/arch/sh/boards/mpc1211/Makefile
deleted file mode 100644
index 8cd31b5..0000000
--- a/arch/sh/boards/mpc1211/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the Interface (CTP/PCI/MPC-SH02) specific parts of the kernel
-#
-
-obj-y := setup.o rtc.o
-
-obj-$(CONFIG_PCI) += pci.o
-
diff --git a/arch/sh/boards/mpc1211/pci.c b/arch/sh/boards/mpc1211/pci.c
deleted file mode 100644
index 23849f7..0000000
--- a/arch/sh/boards/mpc1211/pci.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * Low-Level PCI Support for the MPC-1211(CTP/PCI/MPC-SH02)
- *
- * (c) 2002-2003 Saito.K & Jeanne
- *
- * Dustin McIntire (dustin@sensoria.com)
- * Derived from arch/i386/kernel/pci-*.c which bore the message:
- * (c) 1999--2000 Martin Mares <mj@ucw.cz>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/errno.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/mpc1211/pci.h>
-
-static struct resource mpcpci_io_resource = {
- "MPCPCI IO",
- 0x00000000,
- 0xffffffff,
- IORESOURCE_IO
-};
-
-static struct resource mpcpci_mem_resource = {
- "MPCPCI mem",
- 0x00000000,
- 0xffffffff,
- IORESOURCE_MEM
-};
-
-static struct pci_ops pci_direct_conf1;
-struct pci_channel board_pci_channels[] = {
- {&pci_direct_conf1, &mpcpci_io_resource, &mpcpci_mem_resource, 0, 256},
- {NULL, NULL, NULL, 0, 0},
-};
-
-/*
- * Direct access to PCI hardware...
- */
-
-
-#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-/*
- * Functions for accessing PCI configuration space with type 1 accesses
- */
-static int pci_conf1_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
-{
- u32 word;
- unsigned long flags;
-
- /*
- * PCIPDR may only be accessed as 32 bit words,
- * so we must do byte alignment by hand
- */
- local_irq_save(flags);
- writel(CONFIG_CMD(bus,devfn,where), PCIPAR);
- word = readl(PCIPDR);
- local_irq_restore(flags);
-
- switch (size) {
- case 1:
- switch (where & 0x3) {
- case 3:
- *value = (u8)(word >> 24);
- break;
- case 2:
- *value = (u8)(word >> 16);
- break;
- case 1:
- *value = (u8)(word >> 8);
- break;
- default:
- *value = (u8)word;
- break;
- }
- break;
- case 2:
- switch (where & 0x3) {
- case 3:
- *value = (u16)(word >> 24);
- local_irq_save(flags);
- writel(CONFIG_CMD(bus,devfn,(where+1)), PCIPAR);
- word = readl(PCIPDR);
- local_irq_restore(flags);
- *value |= ((word & 0xff) << 8);
- break;
- case 2:
- *value = (u16)(word >> 16);
- break;
- case 1:
- *value = (u16)(word >> 8);
- break;
- default:
- *value = (u16)word;
- break;
- }
- break;
- case 4:
- *value = word;
- break;
- }
- PCIDBG(4,"pci_conf1_read@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),*value);
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*
- * Since MPC-1211 only does 32bit access we'll have to do a read,mask,write operation.
- * We'll allow an odd byte offset, though it should be illegal.
- */
-static int pci_conf1_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
-{
- u32 word,mask = 0;
- unsigned long flags;
- u32 shift = (where & 3) * 8;
-
- if(size == 1) {
- mask = ((1 << 8) - 1) << shift; // create the byte mask
- } else if(size == 2){
- if(shift == 24)
- return PCIBIOS_BAD_REGISTER_NUMBER;
- mask = ((1 << 16) - 1) << shift; // create the word mask
- }
- local_irq_save(flags);
- writel(CONFIG_CMD(bus,devfn,where), PCIPAR);
- if(size == 4){
- writel(value, PCIPDR);
- local_irq_restore(flags);
- PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),value);
- return PCIBIOS_SUCCESSFUL;
- }
- word = readl(PCIPDR);
- word &= ~mask;
- word |= ((value << shift) & mask);
- writel(word, PCIPDR);
- local_irq_restore(flags);
- PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),word);
- return PCIBIOS_SUCCESSFUL;
-}
-
-#undef CONFIG_CMD
-
-static struct pci_ops pci_direct_conf1 = {
- .read = pci_conf1_read,
- .write = pci_conf1_write,
-};
-
-static void __devinit quirk_ali_ide_ports(struct pci_dev *dev)
-{
- dev->resource[0].start = 0x1f0;
- dev->resource[0].end = 0x1f7;
- dev->resource[0].flags = IORESOURCE_IO;
- dev->resource[1].start = 0x3f6;
- dev->resource[1].end = 0x3f6;
- dev->resource[1].flags = IORESOURCE_IO;
- dev->resource[2].start = 0x170;
- dev->resource[2].end = 0x177;
- dev->resource[2].flags = IORESOURCE_IO;
- dev->resource[3].start = 0x376;
- dev->resource[3].end = 0x376;
- dev->resource[3].flags = IORESOURCE_IO;
- dev->resource[4].start = 0xf000;
- dev->resource[4].end = 0xf00f;
- dev->resource[4].flags = IORESOURCE_IO;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, quirk_ali_ide_ports);
-
-char * __devinit pcibios_setup(char *str)
-{
- return str;
-}
-
-/*
- * Called after each bus is probed, but before its children
- * are examined.
- */
-
-void __devinit pcibios_fixup_bus(struct pci_bus *b)
-{
- pci_read_bridge_bases(b);
-}
-
-/*
- * IRQ functions
- */
-static inline u8 bridge_swizzle(u8 pin, u8 slot)
-{
- return (((pin-1) + slot) % 4) + 1;
-}
-
-static inline u8 bridge_swizzle_pci_1(u8 pin, u8 slot)
-{
- return (((pin-1) - slot) & 3) + 1;
-}
-
-static u8 __init mpc1211_swizzle(struct pci_dev *dev, u8 *pinp)
-{
- unsigned long flags;
- u8 pin = *pinp;
- u32 word;
-
- for ( ; dev->bus->self; dev = dev->bus->self) {
- if (!pin)
- continue;
-
- if (dev->bus->number == 1) {
- local_irq_save(flags);
- writel(0x80000000 | 0x2c, PCIPAR);
- word = readl(PCIPDR);
- local_irq_restore(flags);
- word >>= 16;
-
- if (word == 0x0001)
- pin = bridge_swizzle_pci_1(pin, PCI_SLOT(dev->devfn));
- else
- pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
- } else
- pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
- }
-
- *pinp = pin;
-
- return PCI_SLOT(dev->devfn);
-}
-
-static int __init map_mpc1211_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq = -1;
-
- /* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */
- if (dev->bus->number == 0) {
- switch (slot) {
- case 13: irq = 9; break; /* USB */
- case 22: irq = 10; break; /* LAN */
- default: irq = 0; break;
- }
- } else {
- switch (pin) {
- case 0: irq = 0; break;
- case 1: irq = 7; break;
- case 2: irq = 9; break;
- case 3: irq = 10; break;
- case 4: irq = 11; break;
- }
- }
-
- if( irq < 0 ) {
- PCIDBG(3, "PCI: Error mapping IRQ on device %s\n", pci_name(dev));
- return irq;
- }
-
- PCIDBG(2, "Setting IRQ for slot %s to %d\n", pci_name(dev), irq);
-
- return irq;
-}
-
-void __init pcibios_fixup_irqs(void)
-{
- pci_fixup_irqs(mpc1211_swizzle, map_mpc1211_irq);
-}
-
-void pcibios_align_resource(void *data, struct resource *res,
- resource_size_t size, resource_size_t align)
-{
- resource_size_t start = res->start;
-
- if (res->flags & IORESOURCE_IO) {
- if (start >= 0x10000UL) {
- if ((start & 0xffffUL) < 0x4000UL) {
- start = (start & 0xffff0000UL) + 0x4000UL;
- } else if ((start & 0xffffUL) >= 0xf000UL) {
- start = (start & 0xffff0000UL) + 0x10000UL;
- }
- res->start = start;
- } else {
- if (start & 0x300) {
- start = (start + 0x3ff) & ~0x3ff;
- res->start = start;
- }
- }
- }
-}
-
diff --git a/arch/sh/boards/mpc1211/rtc.c b/arch/sh/boards/mpc1211/rtc.c
deleted file mode 100644
index 03b123a..0000000
--- a/arch/sh/boards/mpc1211/rtc.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * linux/arch/sh/kernel/rtc-mpc1211.c -- MPC-1211 on-chip RTC support
- *
- * Copyright (C) 2002 Saito.K & Jeanne
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-#include <linux/bcd.h>
-#include <linux/mc146818rtc.h>
-
-unsigned long get_cmos_time(void)
-{
- unsigned int year, mon, day, hour, min, sec;
-
- spin_lock(&rtc_lock);
-
- do {
- sec = CMOS_READ(RTC_SECONDS);
- min = CMOS_READ(RTC_MINUTES);
- hour = CMOS_READ(RTC_HOURS);
- day = CMOS_READ(RTC_DAY_OF_MONTH);
- mon = CMOS_READ(RTC_MONTH);
- year = CMOS_READ(RTC_YEAR);
- } while (sec != CMOS_READ(RTC_SECONDS));
-
- if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- BCD_TO_BIN(sec);
- BCD_TO_BIN(min);
- BCD_TO_BIN(hour);
- BCD_TO_BIN(day);
- BCD_TO_BIN(mon);
- BCD_TO_BIN(year);
- }
-
- spin_unlock(&rtc_lock);
-
- year += 1900;
- if (year < 1970)
- year += 100;
-
- return mktime(year, mon, day, hour, min, sec);
-}
-
-void mpc1211_rtc_gettimeofday(struct timeval *tv)
-{
-
- tv->tv_sec = get_cmos_time();
- tv->tv_usec = 0;
-}
-
-/* arc/i386/kernel/time.c */
-/*
- * In order to set the CMOS clock precisely, set_rtc_mmss has to be
- * called 500 ms after the second nowtime has started, because when
- * nowtime is written into the registers of the CMOS clock, it will
- * jump to the next second precisely 500 ms later. Check the Motorola
- * MC146818A or Dallas DS12887 data sheet for details.
- *
- * BUG: This routine does not handle hour overflow properly; it just
- * sets the minutes. Usually you'll only notice that after reboot!
- */
-static int set_rtc_mmss(unsigned long nowtime)
-{
- int retval = 0;
- int real_seconds, real_minutes, cmos_minutes;
- unsigned char save_control, save_freq_select;
-
- /* gets recalled with irq locally disabled */
- spin_lock(&rtc_lock);
- save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
- CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
-
- save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
- CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
- cmos_minutes = CMOS_READ(RTC_MINUTES);
- if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
- BCD_TO_BIN(cmos_minutes);
-
- /*
- * since we're only adjusting minutes and seconds,
- * don't interfere with hour overflow. This avoids
- * messing with unknown time zones but requires your
- * RTC not to be off by more than 15 minutes
- */
- real_seconds = nowtime % 60;
- real_minutes = nowtime / 60;
- if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
- real_minutes += 30; /* correct for half hour time zone */
- real_minutes %= 60;
-
- if (abs(real_minutes - cmos_minutes) < 30) {
- if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- BIN_TO_BCD(real_seconds);
- BIN_TO_BCD(real_minutes);
- }
- CMOS_WRITE(real_seconds,RTC_SECONDS);
- CMOS_WRITE(real_minutes,RTC_MINUTES);
- } else {
- printk(KERN_WARNING
- "set_rtc_mmss: can't update from %d to %d\n",
- cmos_minutes, real_minutes);
- retval = -1;
- }
-
- /* The following flags have to be released exactly in this order,
- * otherwise the DS12887 (popular MC146818A clone with integrated
- * battery and quartz) will not reset the oscillator and will not
- * update precisely 500 ms later. You won't find this mentioned in
- * the Dallas Semiconductor data sheets, but who believes data
- * sheets anyway ... -- Markus Kuhn
- */
- CMOS_WRITE(save_control, RTC_CONTROL);
- CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
- spin_unlock(&rtc_lock);
-
- return retval;
-}
-
-int mpc1211_rtc_settimeofday(const struct timeval *tv)
-{
- unsigned long nowtime = tv->tv_sec;
-
- return set_rtc_mmss(nowtime);
-}
-
-void mpc1211_time_init(void)
-{
- rtc_sh_get_time = mpc1211_rtc_gettimeofday;
- rtc_sh_set_time = mpc1211_rtc_settimeofday;
-}
-
diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c
deleted file mode 100644
index fede363..0000000
--- a/arch/sh/boards/mpc1211/setup.c
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- * linux/arch/sh/boards/mpc1211/setup.c
- *
- * Copyright (C) 2002 Saito.K & Jeanne, Fujii.Y
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/mpc1211/mpc1211.h>
-#include <asm/mpc1211/pci.h>
-#include <asm/mpc1211/m1543c.h>
-
-/* ALI15X3 SMBus address offsets */
-#define SMBHSTSTS (0 + 0x3100)
-#define SMBHSTCNT (1 + 0x3100)
-#define SMBHSTSTART (2 + 0x3100)
-#define SMBHSTCMD (7 + 0x3100)
-#define SMBHSTADD (3 + 0x3100)
-#define SMBHSTDAT0 (4 + 0x3100)
-#define SMBHSTDAT1 (5 + 0x3100)
-#define SMBBLKDAT (6 + 0x3100)
-
-/* Other settings */
-#define MAX_TIMEOUT 500 /* times 1/100 sec */
-
-/* ALI15X3 command constants */
-#define ALI15X3_ABORT 0x04
-#define ALI15X3_T_OUT 0x08
-#define ALI15X3_QUICK 0x00
-#define ALI15X3_BYTE 0x10
-#define ALI15X3_BYTE_DATA 0x20
-#define ALI15X3_WORD_DATA 0x30
-#define ALI15X3_BLOCK_DATA 0x40
-#define ALI15X3_BLOCK_CLR 0x80
-
-/* ALI15X3 status register bits */
-#define ALI15X3_STS_IDLE 0x04
-#define ALI15X3_STS_BUSY 0x08
-#define ALI15X3_STS_DONE 0x10
-#define ALI15X3_STS_DEV 0x20 /* device error */
-#define ALI15X3_STS_COLL 0x40 /* collision or no response */
-#define ALI15X3_STS_TERM 0x80 /* terminated by abort */
-#define ALI15X3_STS_ERR 0xE0 /* all the bad error bits */
-
-static void __init pci_write_config(unsigned long busNo,
- unsigned long devNo,
- unsigned long fncNo,
- unsigned long cnfAdd,
- unsigned long cnfData)
-{
- ctrl_outl((0x80000000
- + ((busNo & 0xff) << 16)
- + ((devNo & 0x1f) << 11)
- + ((fncNo & 0x07) << 8)
- + (cnfAdd & 0xfc)), PCIPAR);
-
- ctrl_outl(cnfData, PCIPDR);
-}
-
-/*
- Initialize IRQ setting
-*/
-
-static unsigned char m_irq_mask = 0xfb;
-static unsigned char s_irq_mask = 0xff;
-
-static void disable_mpc1211_irq(unsigned int irq)
-{
- if( irq < 8) {
- m_irq_mask |= (1 << irq);
- outb(m_irq_mask,I8259_M_MR);
- } else {
- s_irq_mask |= (1 << (irq - 8));
- outb(s_irq_mask,I8259_S_MR);
- }
-
-}
-
-static void enable_mpc1211_irq(unsigned int irq)
-{
- if( irq < 8) {
- m_irq_mask &= ~(1 << irq);
- outb(m_irq_mask,I8259_M_MR);
- } else {
- s_irq_mask &= ~(1 << (irq - 8));
- outb(s_irq_mask,I8259_S_MR);
- }
-}
-
-static inline int mpc1211_irq_real(unsigned int irq)
-{
- int value;
- int irqmask;
-
- if ( irq < 8) {
- irqmask = 1<<irq;
- outb(0x0b,I8259_M_CR); /* ISR register */
- value = inb(I8259_M_CR) & irqmask;
- outb(0x0a,I8259_M_CR); /* back ro the IPR reg */
- return value;
- }
- irqmask = 1<<(irq - 8);
- outb(0x0b,I8259_S_CR); /* ISR register */
- value = inb(I8259_S_CR) & irqmask;
- outb(0x0a,I8259_S_CR); /* back ro the IPR reg */
- return value;
-}
-
-static void mask_and_ack_mpc1211(unsigned int irq)
-{
- if(irq < 8) {
- if(m_irq_mask & (1<<irq)){
- if(!mpc1211_irq_real(irq)){
- atomic_inc(&irq_err_count)
- printk("spurious 8259A interrupt: IRQ %x\n",irq);
- }
- } else {
- m_irq_mask |= (1<<irq);
- }
- inb(I8259_M_MR); /* DUMMY */
- outb(m_irq_mask,I8259_M_MR); /* disable */
- outb(0x60+irq,I8259_M_CR); /* EOI */
-
- } else {
- if(s_irq_mask & (1<<(irq - 8))){
- if(!mpc1211_irq_real(irq)){
- atomic_inc(&irq_err_count);
- printk("spurious 8259A interrupt: IRQ %x\n",irq);
- }
- } else {
- s_irq_mask |= (1<<(irq - 8));
- }
- inb(I8259_S_MR); /* DUMMY */
- outb(s_irq_mask,I8259_S_MR); /* disable */
- outb(0x60+(irq-8),I8259_S_CR); /* EOI */
- outb(0x60+2,I8259_M_CR);
- }
-}
-
-static void end_mpc1211_irq(unsigned int irq)
-{
- enable_mpc1211_irq(irq);
-}
-
-static unsigned int startup_mpc1211_irq(unsigned int irq)
-{
- enable_mpc1211_irq(irq);
- return 0;
-}
-
-static void shutdown_mpc1211_irq(unsigned int irq)
-{
- disable_mpc1211_irq(irq);
-}
-
-static struct hw_interrupt_type mpc1211_irq_type = {
- .typename = "MPC1211-IRQ",
- .startup = startup_mpc1211_irq,
- .shutdown = shutdown_mpc1211_irq,
- .enable = enable_mpc1211_irq,
- .disable = disable_mpc1211_irq,
- .ack = mask_and_ack_mpc1211,
- .end = end_mpc1211_irq
-};
-
-static void make_mpc1211_irq(unsigned int irq)
-{
- irq_desc[irq].chip = &mpc1211_irq_type;
- irq_desc[irq].status = IRQ_DISABLED;
- irq_desc[irq].action = 0;
- irq_desc[irq].depth = 1;
- disable_mpc1211_irq(irq);
-}
-
-int mpc1211_irq_demux(int irq)
-{
- unsigned int poll;
-
- if( irq == 2 ) {
- outb(0x0c,I8259_M_CR);
- poll = inb(I8259_M_CR);
- if(poll & 0x80) {
- irq = (poll & 0x07);
- }
- if( irq == 2) {
- outb(0x0c,I8259_S_CR);
- poll = inb(I8259_S_CR);
- irq = (poll & 0x07) + 8;
- }
- }
- return irq;
-}
-
-static void __init init_mpc1211_IRQ(void)
-{
- int i;
- /*
- * Super I/O (Just mimic PC):
- * 1: keyboard
- * 3: serial 1
- * 4: serial 0
- * 5: printer
- * 6: floppy
- * 8: rtc
- * 10: lan
- * 12: mouse
- * 14: ide0
- * 15: ide1
- */
-
- pci_write_config(0,0,0,0x54, 0xb0b0002d);
- outb(0x11, I8259_M_CR); /* mater icw1 edge trigger */
- outb(0x11, I8259_S_CR); /* slave icw1 edge trigger */
- outb(0x20, I8259_M_MR); /* m icw2 base vec 0x08 */
- outb(0x28, I8259_S_MR); /* s icw2 base vec 0x70 */
- outb(0x04, I8259_M_MR); /* m icw3 slave irq2 */
- outb(0x02, I8259_S_MR); /* s icw3 slave id */
- outb(0x01, I8259_M_MR); /* m icw4 non buf normal eoi*/
- outb(0x01, I8259_S_MR); /* s icw4 non buf normal eo1*/
- outb(0xfb, I8259_M_MR); /* disable irq0--irq7 */
- outb(0xff, I8259_S_MR); /* disable irq8--irq15 */
-
- for ( i=0; i < 16; i++) {
- if(i != 2) {
- make_mpc1211_irq(i);
- }
- }
-}
-
-static void delay1000(void)
-{
- int i;
-
- for (i=0; i<1000; i++)
- ctrl_delay();
-}
-
-static int put_smb_blk(unsigned char *p, int address, int command, int no)
-{
- int temp;
- int timeout;
- int i;
-
- outb(0xff, SMBHSTSTS);
- temp = inb(SMBHSTSTS);
- for (timeout = 0; (timeout < MAX_TIMEOUT) && !(temp & ALI15X3_STS_IDLE); timeout++) {
- delay1000();
- temp = inb(SMBHSTSTS);
- }
- if (timeout >= MAX_TIMEOUT){
- return -1;
- }
-
- outb(((address & 0x7f) << 1), SMBHSTADD);
- outb(0xc0, SMBHSTCNT);
- outb(command & 0xff, SMBHSTCMD);
- outb(no & 0x1f, SMBHSTDAT0);
-
- for(i = 1; i <= no; i++) {
- outb(*p++, SMBBLKDAT);
- }
- outb(0xff, SMBHSTSTART);
-
- temp = inb(SMBHSTSTS);
- for (timeout = 0; (timeout < MAX_TIMEOUT) && !(temp & (ALI15X3_STS_ERR | ALI15X3_STS_DONE)); timeout++) {
- delay1000();
- temp = inb(SMBHSTSTS);
- }
- if (timeout >= MAX_TIMEOUT) {
- return -2;
- }
- if ( temp & ALI15X3_STS_ERR ){
- return -3;
- }
- return 0;
-}
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = 0xa2000000,
- .end = 0xa2000000,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct platform_device *mpc1211_devices[] __initdata = {
- &heartbeat_device,
-};
-
-static int __init mpc1211_devices_setup(void)
-{
- return platform_add_devices(mpc1211_devices,
- ARRAY_SIZE(mpc1211_devices));
-}
-__initcall(mpc1211_devices_setup);
-
-/* arch/sh/boards/mpc1211/rtc.c */
-void mpc1211_time_init(void);
-
-static void __init mpc1211_setup(char **cmdline_p)
-{
- unsigned char spd_buf[128];
-
- __set_io_port_base(PA_PCI_IO);
-
- pci_write_config(0,0,0,0x54, 0xb0b00000);
-
- do {
- outb(ALI15X3_ABORT, SMBHSTCNT);
- spd_buf[0] = 0x0c;
- spd_buf[1] = 0x43;
- spd_buf[2] = 0x7f;
- spd_buf[3] = 0x03;
- spd_buf[4] = 0x00;
- spd_buf[5] = 0x03;
- spd_buf[6] = 0x00;
- } while (put_smb_blk(spd_buf, 0x69, 0, 7) < 0);
-
- board_time_init = mpc1211_time_init;
-
- return 0;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_mpc1211 __initmv = {
- .mv_name = "Interface MPC-1211(CTP/PCI/MPC-SH02)",
- .mv_setup = mpc1211_setup,
- .mv_nr_irqs = 48,
- .mv_irq_demux = mpc1211_irq_demux,
- .mv_init_irq = init_mpc1211_IRQ,
-};
diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c
index e7c150d..01af442 100644
--- a/arch/sh/boards/renesas/migor/setup.c
+++ b/arch/sh/boards/renesas/migor/setup.c
@@ -14,6 +14,7 @@
#include <linux/mtd/physmap.h>
#include <linux/mtd/nand.h>
#include <linux/i2c.h>
+#include <linux/smc91x.h>
#include <asm/machvec.h>
#include <asm/io.h>
#include <asm/sh_keysc.h>
@@ -27,6 +28,11 @@
* 0x18000000 8GB 8 NAND Flash (K9K8G08U0A)
*/
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT,
+ .irq_flags = IRQF_TRIGGER_HIGH,
+};
+
static struct resource smc91x_eth_resources[] = {
[0] = {
.name = "SMC91C111" ,
@@ -36,7 +42,7 @@
},
[1] = {
.start = 32, /* IRQ0 */
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+ .flags = IORESOURCE_IRQ,
},
};
@@ -44,6 +50,9 @@
.name = "smc91x",
.num_resources = ARRAY_SIZE(smc91x_eth_resources),
.resource = smc91x_eth_resources,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
};
static struct sh_keysc_info sh_keysc_info = {
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c
index 68f0ad1..ae1cfcb 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c
+++ b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c
@@ -62,7 +62,7 @@
static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors,
NULL, mask_registers, NULL, NULL);
-unsigned char * __init highlander_init_irq_r7780mp(void)
+unsigned char * __init highlander_plat_irq_setup(void)
{
if ((ctrl_inw(0xa4000700) & 0xf000) == 0x2000) {
printk(KERN_INFO "Using r7780mp interrupt controller.\n");
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c
index bd34048..9d3921f 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c
+++ b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c
@@ -55,7 +55,7 @@
static DECLARE_INTC_DESC(intc_desc, "r7780rp", vectors,
NULL, mask_registers, NULL, NULL);
-unsigned char * __init highlander_init_irq_r7780rp(void)
+unsigned char * __init highlander_plat_irq_setup(void)
{
if (ctrl_inw(0xa5000600)) {
printk(KERN_INFO "Using r7780rp interrupt controller.\n");
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c
index bf7ec10..896c045 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c
+++ b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c
@@ -64,7 +64,7 @@
static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors,
NULL, mask_registers, NULL, NULL);
-unsigned char * __init highlander_init_irq_r7785rp(void)
+unsigned char * __init highlander_plat_irq_setup(void)
{
if ((ctrl_inw(0xa4000158) & 0xf000) != 0x1000)
return NULL;
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c
index ac0a965..bc79afb 100644
--- a/arch/sh/boards/renesas/r7780rp/setup.c
+++ b/arch/sh/boards/renesas/r7780rp/setup.c
@@ -316,7 +316,7 @@
static unsigned char irl2irq[HL_NR_IRL];
-int highlander_irq_demux(int irq)
+static int highlander_irq_demux(int irq)
{
if (irq >= HL_NR_IRL || !irl2irq[irq])
return irq;
@@ -324,27 +324,9 @@
return irl2irq[irq];
}
-void __init highlander_init_irq(void)
+static void __init highlander_init_irq(void)
{
- unsigned char *ucp = NULL;
-
- do {
-#ifdef CONFIG_SH_R7780MP
- ucp = highlander_init_irq_r7780mp();
- if (ucp)
- break;
-#endif
-#ifdef CONFIG_SH_R7785RP
- ucp = highlander_init_irq_r7785rp();
- if (ucp)
- break;
-#endif
-#ifdef CONFIG_SH_R7780RP
- ucp = highlander_init_irq_r7780rp();
- if (ucp)
- break;
-#endif
- } while (0);
+ unsigned char *ucp = highlander_plat_irq_setup();
if (ucp) {
plat_irq_setup_pins(IRQ_MODE_IRL3210);
diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c
index f21ee49..452d0d6 100644
--- a/arch/sh/boards/renesas/rts7751r2d/setup.c
+++ b/arch/sh/boards/renesas/rts7751r2d/setup.c
@@ -109,7 +109,6 @@
.resource = heartbeat_resources,
};
-#ifdef CONFIG_MFD_SM501
static struct plat_serial8250_port uart_platform_data[] = {
{
.membase = (void __iomem *)0xb3e30000,
@@ -208,13 +207,9 @@
.resource = sm501_resources,
};
-#endif /* CONFIG_MFD_SM501 */
-
static struct platform_device *rts7751r2d_devices[] __initdata = {
-#ifdef CONFIG_MFD_SM501
&uart_device,
&sm501_device,
-#endif
&heartbeat_device,
&spi_sh_sci_device,
};
@@ -234,7 +229,9 @@
{
if (register_trapped_io(&cf_trapped_io) == 0)
platform_device_register(&cf_ide_device);
+
spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
+
return platform_add_devices(rts7751r2d_devices,
ARRAY_SIZE(rts7751r2d_devices));
}
diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/se/7206/setup.c
index 5b3ee08..4fe84cc 100644
--- a/arch/sh/boards/se/7206/setup.c
+++ b/arch/sh/boards/se/7206/setup.c
@@ -3,12 +3,13 @@
* linux/arch/sh/boards/se/7206/setup.c
*
* Copyright (C) 2006 Yoshinori Sato
- * Copyright (C) 2007 Paul Mundt
+ * Copyright (C) 2007 - 2008 Paul Mundt
*
* Hitachi 7206 SolutionEngine Support.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/smc91x.h>
#include <asm/se7206.h>
#include <asm/io.h>
#include <asm/machvec.h>
@@ -16,8 +17,9 @@
static struct resource smc91x_resources[] = {
[0] = {
- .start = 0x300,
- .end = 0x300 + 0x020 - 1,
+ .name = "smc91x-regs",
+ .start = PA_SMSC + 0x300,
+ .end = PA_SMSC + 0x300 + 0x020 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -27,9 +29,18 @@
},
};
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT,
+};
+
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = -1,
+ .dev = {
+ .dma_mask = NULL,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &smc91x_info,
+ },
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c
index 33f6ee7..ede3957 100644
--- a/arch/sh/boards/se/7722/setup.c
+++ b/arch/sh/boards/se/7722/setup.c
@@ -14,6 +14,7 @@
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/input.h>
+#include <linux/smc91x.h>
#include <asm/machvec.h>
#include <asm/se7722.h>
#include <asm/io.h>
@@ -44,6 +45,10 @@
};
/* SMC91x */
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT,
+};
+
static struct resource smc91x_eth_resources[] = {
[0] = {
.name = "smc91x-regs" ,
@@ -64,6 +69,7 @@
.dev = {
.dma_mask = NULL, /* don't use dma */
.coherent_dma_mask = 0xffffffff,
+ .platform_data = &smc91x_info,
},
.num_resources = ARRAY_SIZE(smc91x_eth_resources),
.resource = smc91x_eth_resources,
diff --git a/arch/sh/boot/compressed/Makefile_32 b/arch/sh/boot/compressed/Makefile_32
index 6ac8d4a..c0d25fb 100644
--- a/arch/sh/boot/compressed/Makefile_32
+++ b/arch/sh/boot/compressed/Makefile_32
@@ -6,7 +6,6 @@
targets := vmlinux vmlinux.bin vmlinux.bin.gz \
head_32.o misc_32.o piggy.o
-EXTRA_AFLAGS := -traditional
OBJECTS = $(obj)/head_32.o $(obj)/misc_32.o
diff --git a/arch/sh/boot/compressed/Makefile_64 b/arch/sh/boot/compressed/Makefile_64
index 4334f2b..912f3e2 100644
--- a/arch/sh/boot/compressed/Makefile_64
+++ b/arch/sh/boot/compressed/Makefile_64
@@ -13,7 +13,6 @@
targets := vmlinux vmlinux.bin vmlinux.bin.gz \
head_64.o misc_64.o cache.o piggy.o
-EXTRA_AFLAGS := -traditional
OBJECTS := $(obj)/vmlinux_64.lds $(obj)/head_64.o $(obj)/misc_64.o \
$(obj)/cache.o
diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c
index d6e0e2b..de45c6a 100644
--- a/arch/sh/kernel/cpu/irq/intc-sh5.c
+++ b/arch/sh/kernel/cpu/irq/intc-sh5.c
@@ -184,9 +184,8 @@
void __init plat_irq_setup(void)
{
- unsigned long long __dummy0, __dummy1=~0x00000000100000f0;
+ unsigned long long __dummy0, __dummy1=~0x00000000100000f0;
unsigned long reg;
- unsigned long data;
int i;
intc_virt = onchip_remap(INTC_BASE, 1024, "INTC");
@@ -196,11 +195,8 @@
/* Set default: per-line enable/disable, priority driven ack/eoi */
- for (i = 0; i < NR_INTC_IRQS; i++) {
- if (platform_int_priority[i] != NO_PRIORITY) {
- irq_desc[i].chip = &intc_irq_type;
- }
- }
+ for (i = 0; i < NR_INTC_IRQS; i++)
+ irq_desc[i].chip = &intc_irq_type;
/* Disable all interrupts and set all priorities to 0 to avoid trouble */
@@ -211,35 +207,42 @@
ctrl_outl( NO_PRIORITY, reg);
- /* Set IRLM */
- /* If all the priorities are set to 'no priority', then
- * assume we are using encoded mode.
- */
- irlm = platform_int_priority[IRQ_IRL0] + platform_int_priority[IRQ_IRL1] + \
- platform_int_priority[IRQ_IRL2] + platform_int_priority[IRQ_IRL3];
+#ifdef CONFIG_SH_CAYMAN
+ {
+ unsigned long data;
- if (irlm == NO_PRIORITY) {
- /* IRLM = 0 */
- reg = INTC_ICR_CLEAR;
- i = IRQ_INTA;
- printk("Trying to use encoded IRL0-3. IRLs unsupported.\n");
- } else {
- /* IRLM = 1 */
- reg = INTC_ICR_SET;
- i = IRQ_IRL0;
- }
- ctrl_outl(INTC_ICR_IRLM, reg);
-
- /* Set interrupt priorities according to platform description */
- for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) {
- data |= platform_int_priority[i] << ((i % INTC_INTPRI_PPREG) * 4);
- if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) {
- /* Upon the 7th, set Priority Register */
- ctrl_outl(data, reg);
- data = 0;
- reg += 8;
+ /* Set IRLM */
+ /* If all the priorities are set to 'no priority', then
+ * assume we are using encoded mode.
+ */
+ irlm = platform_int_priority[IRQ_IRL0] +
+ platform_int_priority[IRQ_IRL1] +
+ platform_int_priority[IRQ_IRL2] +
+ platform_int_priority[IRQ_IRL3];
+ if (irlm == NO_PRIORITY) {
+ /* IRLM = 0 */
+ reg = INTC_ICR_CLEAR;
+ i = IRQ_INTA;
+ printk("Trying to use encoded IRL0-3. IRLs unsupported.\n");
+ } else {
+ /* IRLM = 1 */
+ reg = INTC_ICR_SET;
+ i = IRQ_IRL0;
}
- }
+ ctrl_outl(INTC_ICR_IRLM, reg);
+
+ /* Set interrupt priorities according to platform description */
+ for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) {
+ data |= platform_int_priority[i] <<
+ ((i % INTC_INTPRI_PPREG) * 4);
+ if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) {
+ /* Upon the 7th, set Priority Register */
+ ctrl_outl(data, reg);
+ data = 0;
+ reg += 8;
+ }
+ }
+#endif
/*
* And now let interrupts come in.
diff --git a/arch/sh/kernel/cpu/irq/intc.c b/arch/sh/kernel/cpu/irq/intc.c
index 84806b2..da5dae7 100644
--- a/arch/sh/kernel/cpu/irq/intc.c
+++ b/arch/sh/kernel/cpu/irq/intc.c
@@ -1,7 +1,7 @@
/*
* Shared interrupt handling code for IPR and INTC2 types of IRQs.
*
- * Copyright (C) 2007 Magnus Damm
+ * Copyright (C) 2007, 2008 Magnus Damm
*
* Based on intc2.c and ipr.c
*
@@ -62,6 +62,9 @@
#endif
static unsigned int intc_prio_level[NR_IRQS]; /* for now */
+#ifdef CONFIG_CPU_SH3
+static unsigned long ack_handle[NR_IRQS];
+#endif
static inline struct intc_desc_int *get_intc_desc(unsigned int irq)
{
@@ -98,17 +101,26 @@
static void modify_8(unsigned long addr, unsigned long h, unsigned long data)
{
+ unsigned long flags;
+ local_irq_save(flags);
ctrl_outb(set_field(ctrl_inb(addr), data, h), addr);
+ local_irq_restore(flags);
}
static void modify_16(unsigned long addr, unsigned long h, unsigned long data)
{
+ unsigned long flags;
+ local_irq_save(flags);
ctrl_outw(set_field(ctrl_inw(addr), data, h), addr);
+ local_irq_restore(flags);
}
static void modify_32(unsigned long addr, unsigned long h, unsigned long data)
{
+ unsigned long flags;
+ local_irq_save(flags);
ctrl_outl(set_field(ctrl_inl(addr), data, h), addr);
+ local_irq_restore(flags);
}
enum { REG_FN_ERR = 0, REG_FN_WRITE_BASE = 1, REG_FN_MODIFY_BASE = 5 };
@@ -219,6 +231,25 @@
}
}
+#ifdef CONFIG_CPU_SH3
+static void intc_mask_ack(unsigned int irq)
+{
+ struct intc_desc_int *d = get_intc_desc(irq);
+ unsigned long handle = ack_handle[irq];
+ unsigned long addr;
+
+ intc_disable(irq);
+
+ /* read register and write zero only to the assocaited bit */
+
+ if (handle) {
+ addr = INTC_REG(d, _INTC_ADDR_D(handle), 0);
+ ctrl_inb(addr);
+ ctrl_outb(0x3f ^ set_field(0, 1, handle), addr);
+ }
+}
+#endif
+
static struct intc_handle_int *intc_find_irq(struct intc_handle_int *hp,
unsigned int nr_hp,
unsigned int irq)
@@ -280,7 +311,12 @@
[IRQ_TYPE_EDGE_FALLING] = VALID(0),
[IRQ_TYPE_EDGE_RISING] = VALID(1),
[IRQ_TYPE_LEVEL_LOW] = VALID(2),
+ /* SH7706, SH7707 and SH7709 do not support high level triggered */
+#if !defined(CONFIG_CPU_SUBTYPE_SH7706) && \
+ !defined(CONFIG_CPU_SUBTYPE_SH7707) && \
+ !defined(CONFIG_CPU_SUBTYPE_SH7709)
[IRQ_TYPE_LEVEL_HIGH] = VALID(3),
+#endif
};
static int intc_set_sense(unsigned int irq, unsigned int type)
@@ -430,6 +466,40 @@
return 0;
}
+#ifdef CONFIG_CPU_SH3
+static unsigned int __init intc_ack_data(struct intc_desc *desc,
+ struct intc_desc_int *d,
+ intc_enum enum_id)
+{
+ struct intc_mask_reg *mr = desc->ack_regs;
+ unsigned int i, j, fn, mode;
+ unsigned long reg_e, reg_d;
+
+ for (i = 0; mr && enum_id && i < desc->nr_ack_regs; i++) {
+ mr = desc->ack_regs + i;
+
+ for (j = 0; j < ARRAY_SIZE(mr->enum_ids); j++) {
+ if (mr->enum_ids[j] != enum_id)
+ continue;
+
+ fn = REG_FN_MODIFY_BASE;
+ mode = MODE_ENABLE_REG;
+ reg_e = mr->set_reg;
+ reg_d = mr->set_reg;
+
+ fn += (mr->reg_width >> 3) - 1;
+ return _INTC_MK(fn, mode,
+ intc_get_reg(d, reg_e),
+ intc_get_reg(d, reg_d),
+ 1,
+ (mr->reg_width - 1) - j);
+ }
+ }
+
+ return 0;
+}
+#endif
+
static unsigned int __init intc_sense_data(struct intc_desc *desc,
struct intc_desc_int *d,
intc_enum enum_id)
@@ -530,6 +600,11 @@
/* irq should be disabled by default */
d->chip.mask(irq);
+
+#ifdef CONFIG_CPU_SH3
+ if (desc->ack_regs)
+ ack_handle[irq] = intc_ack_data(desc, d, enum_id);
+#endif
}
static unsigned int __init save_reg(struct intc_desc_int *d,
@@ -560,6 +635,9 @@
d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0;
d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0;
+#ifdef CONFIG_CPU_SH3
+ d->nr_reg += desc->ack_regs ? desc->nr_ack_regs : 0;
+#endif
d->reg = alloc_bootmem(d->nr_reg * sizeof(*d->reg));
#ifdef CONFIG_SMP
d->smp = alloc_bootmem(d->nr_reg * sizeof(*d->smp));
@@ -592,14 +670,23 @@
}
}
- BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */
-
d->chip.name = desc->name;
d->chip.mask = intc_disable;
d->chip.unmask = intc_enable;
d->chip.mask_ack = intc_disable;
d->chip.set_type = intc_set_sense;
+#ifdef CONFIG_CPU_SH3
+ if (desc->ack_regs) {
+ for (i = 0; i < desc->nr_ack_regs; i++)
+ k += save_reg(d, k, desc->ack_regs[i].set_reg, 0);
+
+ d->chip.mask_ack = intc_mask_ack;
+ }
+#endif
+
+ BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */
+
for (i = 0; i < desc->nr_vectors; i++) {
struct intc_vect *vect = desc->vectors + i;
diff --git a/arch/sh/kernel/cpu/sh2a/fpu.c b/arch/sh/kernel/cpu/sh2a/fpu.c
index 5627c0b..6df2fb9 100644
--- a/arch/sh/kernel/cpu/sh2a/fpu.c
+++ b/arch/sh/kernel/cpu/sh2a/fpu.c
@@ -300,7 +300,7 @@
iy = hy & 0x7fffffff;
if (iy < 0x00800000) {
ix = denormal_subf1(ix, iy);
- if (ix < 0) {
+ if ((int) ix < 0) {
ix = -ix;
sign ^= 0x80000000;
}
@@ -385,7 +385,7 @@
iy = hy & 0x7fffffffffffffffLL;
if (iy < 0x0010000000000000LL) {
ix = denormal_subd1(ix, iy);
- if (ix < 0) {
+ if ((int) ix < 0) {
ix = -ix;
sign ^= 0x8000000000000000LL;
}
diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile
index 3ae4d91..511de55 100644
--- a/arch/sh/kernel/cpu/sh3/Makefile
+++ b/arch/sh/kernel/cpu/sh3/Makefile
@@ -2,7 +2,7 @@
# Makefile for the Linux/SuperH SH-3 backends.
#
-obj-y := ex.o probe.o entry.o
+obj-y := ex.o probe.o entry.o setup-sh3.o
# CPU subtype setup
obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh3.c b/arch/sh/kernel/cpu/sh3/setup-sh3.c
new file mode 100644
index 0000000..c988468
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh3/setup-sh3.c
@@ -0,0 +1,71 @@
+/*
+ * Shared SH3 Setup code
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+/* All SH3 devices are equipped with IRQ0->5 (except sh7708) */
+
+enum {
+ UNUSED = 0,
+
+ /* interrupt sources */
+ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
+};
+
+static struct intc_vect vectors_irq0123[] __initdata = {
+ INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+ INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+};
+
+static struct intc_vect vectors_irq45[] __initdata = {
+ INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+ { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
+ { 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+ { 0xa4000004, 0, 8, /* IRR0 */
+ { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } },
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+ { 0xa4000010, 16, 2, { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh3-irq0123",
+ vectors_irq0123, NULL, NULL,
+ prio_registers, sense_registers, ack_registers);
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq45, "sh3-irq45",
+ vectors_irq45, NULL, NULL,
+ prio_registers, sense_registers, ack_registers);
+
+#define INTC_ICR1 0xa4000010UL
+#define INTC_ICR1_IRQLVL (1<<14)
+
+void __init plat_irq_setup_pins(int mode)
+{
+ if (mode == IRQ_MODE_IRQ) {
+ ctrl_outw(ctrl_inw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1);
+ register_intc_controller(&intc_desc_irq0123);
+ return;
+ }
+ BUG();
+}
+
+void __init plat_irq_setup_sh3(void)
+{
+ register_intc_controller(&intc_desc_irq45);
+}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
index f581534..6468ae8 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
@@ -37,7 +37,7 @@
};
static struct intc_vect vectors[] __initdata = {
- INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+ /* IRQ0->5 are handled in setup-sh3.c */
INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720),
INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820),
INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860),
@@ -48,7 +48,7 @@
INTC_VECT(ADC_ADI, 0x980),
INTC_VECT(USB_USI0, 0xa20), INTC_VECT(USB_USI1, 0xa40),
INTC_VECT(TPU0, 0xc00), INTC_VECT(TPU1, 0xc20),
- INTC_VECT(TPU3, 0xc80), INTC_VECT(TPU1, 0xca0),
+ INTC_VECT(TPU2, 0xc80), INTC_VECT(TPU3, 0xca0),
INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460),
INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0),
@@ -81,14 +81,6 @@
static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, groups,
NULL, prio_registers, NULL);
-static struct intc_vect vectors_irq[] __initdata = {
- INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
- INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irq, "sh7705-irq", vectors_irq, NULL,
- NULL, prio_registers, NULL);
-
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xa4410000,
@@ -159,16 +151,8 @@
}
__initcall(sh7705_devices_setup);
-void __init plat_irq_setup_pins(int mode)
-{
- if (mode == IRQ_MODE_IRQ) {
- register_intc_controller(&intc_desc_irq);
- return;
- }
- BUG();
-}
-
void __init plat_irq_setup(void)
{
register_intc_controller(&intc_desc);
+ plat_irq_setup_sh3();
}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
index d3733b1..93c55e2 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
@@ -52,7 +52,7 @@
#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
defined(CONFIG_CPU_SUBTYPE_SH7707) || \
defined(CONFIG_CPU_SUBTYPE_SH7709)
- INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+ /* IRQ0->5 are handled in setup-sh3.c */
INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820),
INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860),
INTC_VECT(ADC_ADI, 0x980),
@@ -104,18 +104,6 @@
static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, groups,
NULL, prio_registers, NULL);
-#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
-static struct intc_vect vectors_irq[] __initdata = {
- INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
- INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irq, "sh770x-irq", vectors_irq, NULL,
- NULL, prio_registers, NULL);
-#endif
-
static struct resource rtc_resources[] = {
[0] = {
.start = 0xfffffec0,
@@ -194,24 +182,12 @@
}
__initcall(sh770x_devices_setup);
-#define INTC_ICR1 0xa4000010UL
-#define INTC_ICR1_IRQLVL (1<<14)
-
-void __init plat_irq_setup_pins(int mode)
-{
- if (mode == IRQ_MODE_IRQ) {
-#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- ctrl_outw(ctrl_inw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1);
- register_intc_controller(&intc_desc_irq);
- return;
-#endif
- }
- BUG();
-}
-
void __init plat_irq_setup(void)
{
register_intc_controller(&intc_desc);
+#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709)
+ plat_irq_setup_sh3();
+#endif
}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
index 7406c9a..77eee48 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
@@ -38,7 +38,7 @@
};
static struct intc_vect vectors[] __initdata = {
- INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+ /* IRQ0->5 are handled in setup-sh3.c */
INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820),
INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860),
INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0),
@@ -79,10 +79,7 @@
{ 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
{ 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } },
{ 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC1, SCIF0, SCIF1 } },
- { 0xa4080000, 0, 16, 4, /* IPRF */ { 0, DMAC2 } },
-#ifdef CONFIG_CPU_SUBTYPE_SH7710
- { 0xa4080000, 0, 16, 4, /* IPRF */ { IPSEC } },
-#endif
+ { 0xa4080000, 0, 16, 4, /* IPRF */ { IPSEC, DMAC2 } },
{ 0xa4080002, 0, 16, 4, /* IPRG */ { EDMAC0, EDMAC1, EDMAC2 } },
{ 0xa4080004, 0, 16, 4, /* IPRH */ { 0, 0, 0, SIOF0 } },
{ 0xa4080006, 0, 16, 4, /* IPRI */ { 0, 0, SIOF1 } },
@@ -91,14 +88,6 @@
static DECLARE_INTC_DESC(intc_desc, "sh7710", vectors, groups,
NULL, prio_registers, NULL);
-static struct intc_vect vectors_irq[] __initdata = {
- INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
- INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irq, "sh7710-irq", vectors_irq, NULL,
- NULL, prio_registers, NULL);
-
static struct resource rtc_resources[] = {
[0] = {
.start = 0xa413fec0,
@@ -170,16 +159,8 @@
}
__initcall(sh7710_devices_setup);
-void __init plat_irq_setup_pins(int mode)
-{
- if (mode == IRQ_MODE_IRQ) {
- register_intc_controller(&intc_desc_irq);
- return;
- }
- BUG();
-}
-
void __init plat_irq_setup(void)
{
register_intc_controller(&intc_desc);
+ plat_irq_setup_sh3();
}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
index 8028082..f807a21 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
@@ -19,10 +19,6 @@
#include <linux/serial_sci.h>
#include <asm/rtc.h>
-#define INTC_ICR1 0xA4140010UL
-#define INTC_ICR_IRLM 0x4000
-#define INTC_ICR_IRQ (~INTC_ICR_IRLM)
-
static struct resource rtc_resources[] = {
[0] = {
.start = 0xa413fec0,
@@ -170,6 +166,7 @@
};
static struct intc_vect vectors[] __initdata = {
+ /* IRQ0->5 are handled in setup-sh3.c */
INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
INTC_VECT(TMU2, 0x440), INTC_VECT(RTC_ATI, 0x480),
INTC_VECT(RTC_PRI, 0x4a0), INTC_VECT(RTC_CUI, 0x4c0),
@@ -214,11 +211,7 @@
{ 0xA414FEE4UL, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, SIM, 0 } },
{ 0xA4140016UL, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
{ 0xA4140018UL, 0, 16, 4, /* IPRD */ { USBF_SPD, TMU_SUNI, IRQ5, IRQ4 } },
-#if defined(CONFIG_CPU_SUBTYPE_SH7720)
{ 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, SSL } },
-#else
- { 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, 0 } },
-#endif
{ 0xA4080000UL, 0, 16, 4, /* IPRF */ { ADC, DMAC2, USBFI, CMT } },
{ 0xA4080002UL, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, 0, 0 } },
{ 0xA4080004UL, 0, 16, 4, /* IPRH */ { PINT07, PINT815, TPU, IIC } },
@@ -229,32 +222,8 @@
static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, groups,
NULL, prio_registers, NULL);
-static struct intc_sense_reg sense_registers[] __initdata = {
- { INTC_ICR1, 16, 2, { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } },
-};
-
-static struct intc_vect vectors_irq[] __initdata = {
- INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
- INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
- INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
-};
-
-static DECLARE_INTC_DESC(intc_irq_desc, "sh7720-irq", vectors_irq,
- NULL, NULL, prio_registers, sense_registers);
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ:
- ctrl_outw(ctrl_inw(INTC_ICR1) & INTC_ICR_IRQ, INTC_ICR1);
- register_intc_controller(&intc_irq_desc);
- break;
- default:
- BUG();
- }
-}
-
void __init plat_irq_setup(void)
{
register_intc_controller(&intc_desc);
+ plat_irq_setup_sh3();
}
diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S
index ba87501..05372ed 100644
--- a/arch/sh/kernel/cpu/sh5/entry.S
+++ b/arch/sh/kernel/cpu/sh5/entry.S
@@ -143,12 +143,22 @@
trap_jtable:
.long do_exception_error /* 0x000 */
.long do_exception_error /* 0x020 */
+#ifdef CONFIG_MMU
.long tlb_miss_load /* 0x040 */
.long tlb_miss_store /* 0x060 */
+#else
+ .long do_exception_error
+ .long do_exception_error
+#endif
! ARTIFICIAL pseudo-EXPEVT setting
.long do_debug_interrupt /* 0x080 */
+#ifdef CONFIG_MMU
.long tlb_miss_load /* 0x0A0 */
.long tlb_miss_store /* 0x0C0 */
+#else
+ .long do_exception_error
+ .long do_exception_error
+#endif
.long do_address_error_load /* 0x0E0 */
.long do_address_error_store /* 0x100 */
#ifdef CONFIG_SH_FPU
@@ -185,10 +195,18 @@
.endr
.long do_IRQ /* 0xA00 */
.long do_IRQ /* 0xA20 */
+#ifdef CONFIG_MMU
.long itlb_miss_or_IRQ /* 0xA40 */
+#else
+ .long do_IRQ
+#endif
.long do_IRQ /* 0xA60 */
.long do_IRQ /* 0xA80 */
+#ifdef CONFIG_MMU
.long itlb_miss_or_IRQ /* 0xAA0 */
+#else
+ .long do_IRQ
+#endif
.long do_exception_error /* 0xAC0 */
.long do_address_error_exec /* 0xAE0 */
.rept 8
@@ -274,6 +292,7 @@
* Instead of '.space 1024-TEXT_SIZE' place the RESVEC
* block making sure the final alignment is correct.
*/
+#ifdef CONFIG_MMU
tlb_miss:
synco /* TAKum03020 (but probably a good idea anyway.) */
putcon SP, KCR1
@@ -377,6 +396,9 @@
getcon KCR1, SP
pta handle_exception, tr0
blink tr0, ZERO
+#else /* CONFIG_MMU */
+ .balign 256
+#endif
/* NB TAKE GREAT CARE HERE TO ENSURE THAT THE INTERRUPT CODE
DOES END UP AT VBR+0x600 */
@@ -1103,6 +1125,7 @@
* fpu_error_or_IRQ? is a helper to deflect to the right cause.
*
*/
+#ifdef CONFIG_MMU
tlb_miss_load:
or SP, ZERO, r2
or ZERO, ZERO, r3 /* Read */
@@ -1132,6 +1155,7 @@
movi do_page_fault, r6
ptabs r6, tr0
blink tr0, ZERO
+#endif /* CONFIG_MMU */
fpu_error_or_IRQA:
pta its_IRQ, tr0
@@ -1481,6 +1505,7 @@
ptabs LINK, tr0
blink tr0, r63
+#ifdef CONFIG_MMU
/*
* --- User Access Handling Section
*/
@@ -1604,6 +1629,7 @@
ptabs LINK, tr0
blink tr0, ZERO
+#endif /* CONFIG_MMU */
/*
* int __strncpy_from_user(unsigned long __dest, unsigned long __src,
@@ -2014,9 +2040,11 @@
.global asm_uaccess_start /* Just a marker */
asm_uaccess_start:
+#ifdef CONFIG_MMU
.long ___copy_user1, ___copy_user_exit
.long ___copy_user2, ___copy_user_exit
.long ___clear_user1, ___clear_user_exit
+#endif
.long ___strncpy_from_user1, ___strncpy_from_user_exit
.long ___strnlen_user1, ___strnlen_user_exit
.long ___get_user_asm_b1, ___get_user_asm_b_exit
diff --git a/arch/sh/kernel/cpu/sh5/probe.c b/arch/sh/kernel/cpu/sh5/probe.c
index 31f8cb0..92ad844 100644
--- a/arch/sh/kernel/cpu/sh5/probe.c
+++ b/arch/sh/kernel/cpu/sh5/probe.c
@@ -15,6 +15,7 @@
#include <linux/string.h>
#include <asm/processor.h>
#include <asm/cache.h>
+#include <asm/tlb.h>
int __init detect_cpu_and_cache_system(void)
{
@@ -67,5 +68,8 @@
set_bit(SH_CACHE_MODE_WB, &(boot_cpu_data.dcache.flags));
#endif
+ /* Setup some I/D TLB defaults */
+ sh64_tlb_init();
+
return 0;
}
diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c
index 957f2561..6b7d166 100644
--- a/arch/sh/kernel/early_printk.c
+++ b/arch/sh/kernel/early_printk.c
@@ -141,7 +141,9 @@
*/
static void scif_sercon_init(char *s)
{
+ struct uart_port *port = &scif_port;
unsigned baud = DEFAULT_BAUD;
+ unsigned int status;
char *e;
if (*s == ',')
@@ -160,19 +162,25 @@
baud = DEFAULT_BAUD;
}
- ctrl_outw(0, scif_port.mapbase + 8);
- ctrl_outw(0, scif_port.mapbase);
+ do {
+ status = sci_in(port, SCxSR);
+ } while (!(status & SCxSR_TEND(port)));
+
+ sci_out(port, SCSCR, 0); /* TE=0, RE=0 */
+ sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
+ sci_out(port, SCSMR, 0);
/* Set baud rate */
- ctrl_outb((CONFIG_SH_PCLK_FREQ + 16 * baud) /
- (32 * baud) - 1, scif_port.mapbase + 4);
+ sci_out(port, SCBRR, (CONFIG_SH_PCLK_FREQ + 16 * baud) /
+ (32 * baud) - 1);
+ udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
- ctrl_outw(12, scif_port.mapbase + 24);
- ctrl_outw(8, scif_port.mapbase + 24);
- ctrl_outw(0, scif_port.mapbase + 32);
- ctrl_outw(0x60, scif_port.mapbase + 16);
- ctrl_outw(0, scif_port.mapbase + 36);
- ctrl_outw(0x30, scif_port.mapbase + 8);
+ sci_out(port, SCSPTR, 0);
+ sci_out(port, SCxSR, 0x60);
+ sci_out(port, SCLSR, 0);
+
+ sci_out(port, SCFCR, 0);
+ sci_out(port, SCSCR, 0x30); /* TE=1, RE=1 */
}
#endif /* defined(CONFIG_CPU_SUBTYPE_SH7720) */
#endif /* !defined(CONFIG_SH_STANDARD_BIOS) */
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 284f66f..516bde9 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -53,6 +53,7 @@
* sh_mv= on the command line, prior to .machvec.init teardown.
*/
struct sh_machine_vector sh_mv = { .mv_name = "generic", };
+EXPORT_SYMBOL(sh_mv);
#ifdef CONFIG_VT
struct screen_info screen_info;
@@ -76,11 +77,18 @@
.flags = IORESOURCE_BUSY | IORESOURCE_MEM,
};
+static struct resource bss_resource = {
+ .name = "Kernel bss",
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM,
+};
+
unsigned long memory_start;
EXPORT_SYMBOL(memory_start);
unsigned long memory_end = 0;
EXPORT_SYMBOL(memory_end);
+static struct resource mem_resources[MAX_NUMNODES];
+
int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
static int __init early_parse_mem(char *p)
@@ -169,6 +177,40 @@
{}
#endif
+void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
+ unsigned long end_pfn)
+{
+ struct resource *res = &mem_resources[nid];
+
+ WARN_ON(res->name); /* max one active range per node for now */
+
+ res->name = "System RAM";
+ res->start = start_pfn << PAGE_SHIFT;
+ res->end = (end_pfn << PAGE_SHIFT) - 1;
+ res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ if (request_resource(&iomem_resource, res)) {
+ pr_err("unable to request memory_resource 0x%lx 0x%lx\n",
+ start_pfn, end_pfn);
+ return;
+ }
+
+ /*
+ * We don't know which RAM region contains kernel data,
+ * so we try it repeatedly and let the resource manager
+ * test it.
+ */
+ request_resource(res, &code_resource);
+ request_resource(res, &data_resource);
+ request_resource(res, &bss_resource);
+
+#ifdef CONFIG_KEXEC
+ if (crashk_res.start != crashk_res.end)
+ request_resource(res, &crashk_res);
+#endif
+
+ add_active_range(nid, start_pfn, end_pfn);
+}
+
void __init setup_bootmem_allocator(unsigned long free_pfn)
{
unsigned long bootmap_size;
@@ -181,7 +223,7 @@
bootmap_size = init_bootmem_node(NODE_DATA(0), free_pfn,
min_low_pfn, max_low_pfn);
- add_active_range(0, min_low_pfn, max_low_pfn);
+ __add_active_range(0, min_low_pfn, max_low_pfn);
register_bootmem_low_pages();
node_set_online(0);
@@ -267,6 +309,8 @@
code_resource.end = virt_to_phys(_etext)-1;
data_resource.start = virt_to_phys(_etext);
data_resource.end = virt_to_phys(_edata)-1;
+ bss_resource.start = virt_to_phys(__bss_start);
+ bss_resource.end = virt_to_phys(_ebss)-1;
memory_start = (unsigned long)__va(__MEMORY_START);
if (!memory_end)
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index 6d40546..8f91653 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -20,8 +20,6 @@
extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
extern struct hw_interrupt_type no_irq_type;
-EXPORT_SYMBOL(sh_mv);
-
/* platform dependent support */
EXPORT_SYMBOL(dump_fpu);
EXPORT_SYMBOL(kernel_thread);
diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c
index a310c97..9324d32 100644
--- a/arch/sh/kernel/sh_ksyms_64.c
+++ b/arch/sh/kernel/sh_ksyms_64.c
@@ -16,6 +16,7 @@
#include <linux/in6.h>
#include <linux/interrupt.h>
#include <linux/screen_info.h>
+#include <asm/cacheflush.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
#include <asm/checksum.h>
@@ -29,25 +30,50 @@
EXPORT_SYMBOL(dump_fpu);
EXPORT_SYMBOL(kernel_thread);
+#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU)
+EXPORT_SYMBOL(clear_user_page);
+#endif
+
+#ifndef CONFIG_CACHE_OFF
+EXPORT_SYMBOL(flush_dcache_page);
+#endif
+
/* Networking helper routines. */
+EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(csum_partial_copy_nocheck);
+#ifdef CONFIG_IPV6
+EXPORT_SYMBOL(csum_ipv6_magic);
+#endif
#ifdef CONFIG_VT
EXPORT_SYMBOL(screen_info);
#endif
+EXPORT_SYMBOL(__put_user_asm_b);
+EXPORT_SYMBOL(__put_user_asm_w);
EXPORT_SYMBOL(__put_user_asm_l);
+EXPORT_SYMBOL(__put_user_asm_q);
+EXPORT_SYMBOL(__get_user_asm_b);
+EXPORT_SYMBOL(__get_user_asm_w);
EXPORT_SYMBOL(__get_user_asm_l);
+EXPORT_SYMBOL(__get_user_asm_q);
+EXPORT_SYMBOL(__strnlen_user);
+EXPORT_SYMBOL(__strncpy_from_user);
+EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(__copy_user);
EXPORT_SYMBOL(empty_zero_page);
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(__udelay);
EXPORT_SYMBOL(__ndelay);
+EXPORT_SYMBOL(__const_udelay);
/* Ugh. These come in from libgcc.a at link time. */
#define DECLARE_EXPORT(name) extern void name(void);EXPORT_SYMBOL(name)
DECLARE_EXPORT(__sdivsi3);
+DECLARE_EXPORT(__sdivsi3_2);
DECLARE_EXPORT(__muldi3);
DECLARE_EXPORT(__udivsi3);
+DECLARE_EXPORT(__div_table);
diff --git a/arch/sh/kernel/sys_sh64.c b/arch/sh/kernel/sys_sh64.c
index 578004d..91fb844 100644
--- a/arch/sh/kernel/sys_sh64.c
+++ b/arch/sh/kernel/sys_sh64.c
@@ -31,23 +31,6 @@
#include <asm/unistd.h>
/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way Unix traditionally does this, though.
- */
-asmlinkage int sys_pipe(unsigned long * fildes)
-{
- int fd[2];
- int error;
-
- error = do_pipe(fd);
- if (!error) {
- if (copy_to_user(fildes, fd, 2*sizeof(int)))
- error = -EFAULT;
- }
- return error;
-}
-
-/*
* Do a system call from kernel instead of calling sys_execve so we
* end up with proper pt_regs.
*/
diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c
index 898977e..022a55f1 100644
--- a/arch/sh/kernel/time_64.c
+++ b/arch/sh/kernel/time_64.c
@@ -172,6 +172,7 @@
tv->tv_sec = sec;
tv->tv_usec = usec;
}
+EXPORT_SYMBOL(do_gettimeofday);
int do_settimeofday(struct timespec *tv)
{
@@ -240,7 +241,7 @@
* the irq version of write_lock because as just said we have irq
* locally disabled. -arca
*/
- write_lock(&xtime_lock);
+ write_seqlock(&xtime_lock);
asm ("getcon cr62, %0" : "=r" (current_ctc));
ctc_last_interrupt = (unsigned long) current_ctc;
@@ -266,7 +267,7 @@
/* do it again in 60 s */
last_rtc_update = xtime.tv_sec - 600;
}
- write_unlock(&xtime_lock);
+ write_sequnlock(&xtime_lock);
#ifndef CONFIG_SMP
update_process_times(user_mode(get_irq_regs()));
diff --git a/arch/sh/lib64/dbg.c b/arch/sh/lib64/dbg.c
index 75825ef..2fb8eaf 100644
--- a/arch/sh/lib64/dbg.c
+++ b/arch/sh/lib64/dbg.c
@@ -186,8 +186,8 @@
rr->pc = regs->pc;
if (sp < stack_bottom + 3092) {
- printk("evt_debug : stack underflow report\n");
int i, j;
+ printk("evt_debug : stack underflow report\n");
for (j=0, i = event_ptr; j<16; j++) {
rr = event_ring + i;
printk("evt=%08x event=%08x tra=%08x pid=%5d sp=%08lx pc=%08lx\n",
diff --git a/arch/sh/mm/Makefile_64 b/arch/sh/mm/Makefile_64
index cbd6aa3..0d92a8a 100644
--- a/arch/sh/mm/Makefile_64
+++ b/arch/sh/mm/Makefile_64
@@ -2,10 +2,11 @@
# Makefile for the Linux SuperH-specific parts of the memory manager.
#
-obj-y := init.o extable_64.o consistent.o
+obj-y := init.o consistent.o
-mmu-y := tlb-nommu.o pg-nommu.o
-mmu-$(CONFIG_MMU) := fault_64.o ioremap_64.o tlbflush_64.o tlb-sh5.o
+mmu-y := tlb-nommu.o pg-nommu.o extable_32.o
+mmu-$(CONFIG_MMU) := fault_64.o ioremap_64.o tlbflush_64.o tlb-sh5.o \
+ extable_64.o
ifndef CONFIG_CACHE_OFF
obj-y += cache-sh5.o
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index 3877321..9e277ec 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -714,6 +714,7 @@
sh64_icache_inv_current_user_range(vaddr, end);
}
+#ifdef CONFIG_MMU
/*
* These *MUST* lie in an area of virtual address space that's otherwise
* unused.
@@ -830,3 +831,4 @@
else
sh64_clear_user_page_coloured(to, address);
}
+#endif
diff --git a/arch/sh/mm/ioremap_64.c b/arch/sh/mm/ioremap_64.c
index cea224c..6e0be24 100644
--- a/arch/sh/mm/ioremap_64.c
+++ b/arch/sh/mm/ioremap_64.c
@@ -343,6 +343,7 @@
return shmedia_alloc_io(phys, size, name);
}
+EXPORT_SYMBOL(onchip_remap);
void onchip_unmap(unsigned long vaddr)
{
@@ -370,6 +371,7 @@
kfree(res);
}
}
+EXPORT_SYMBOL(onchip_unmap);
#ifdef CONFIG_PROC_FS
static int
diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c
index 2de7302..1663199 100644
--- a/arch/sh/mm/numa.c
+++ b/arch/sh/mm/numa.c
@@ -59,7 +59,7 @@
free_pfn = start_pfn = start >> PAGE_SHIFT;
end_pfn = end >> PAGE_SHIFT;
- add_active_range(nid, start_pfn, end_pfn);
+ __add_active_range(nid, start_pfn, end_pfn);
/* Node-local pgdat */
NODE_DATA(nid) = pfn_to_kaddr(free_pfn);
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 987c668..1bba7d3 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -28,7 +28,6 @@
7751SYSTEMH SH_7751_SYSTEMH
HP6XX SH_HP6XX
DREAMCAST SH_DREAMCAST
-MPC1211 SH_MPC1211
SNAPGEAR SH_SECUREEDGE5410
EDOSK7705 SH_EDOSK7705
SH4202_MICRODEV SH_SH4202_MICRODEV
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index 57d1bbd..4bcfe54 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -1306,6 +1306,8 @@
.align 4
.globl linux_sparc_syscall
linux_sparc_syscall:
+ sethi %hi(PSR_SYSCALL), %l4
+ or %l0, %l4, %l0
/* Direct access to user regs, must faster. */
cmp %g1, NR_SYSCALLS
bgeu linux_sparc_ni_syscall
diff --git a/arch/sparc/kernel/process.c b/arch/sparc/kernel/process.c
index e7f3519..da48d24 100644
--- a/arch/sparc/kernel/process.c
+++ b/arch/sparc/kernel/process.c
@@ -419,14 +419,26 @@
unsigned long stack_size)
{
unsigned long parent_tid_ptr, child_tid_ptr;
+ unsigned long orig_i1 = regs->u_regs[UREG_I1];
+ long ret;
parent_tid_ptr = regs->u_regs[UREG_I2];
child_tid_ptr = regs->u_regs[UREG_I4];
- return do_fork(clone_flags, stack_start,
- regs, stack_size,
- (int __user *) parent_tid_ptr,
- (int __user *) child_tid_ptr);
+ ret = do_fork(clone_flags, stack_start,
+ regs, stack_size,
+ (int __user *) parent_tid_ptr,
+ (int __user *) child_tid_ptr);
+
+ /* If we get an error and potentially restart the system
+ * call, we're screwed because copy_thread() clobbered
+ * the parent's %o1. So detect that case and restore it
+ * here.
+ */
+ if ((unsigned long)ret >= -ERESTART_RESTARTBLOCK)
+ regs->u_regs[UREG_I1] = orig_i1;
+
+ return ret;
}
/* Copy a Sparc thread. The fork() return value conventions
@@ -626,11 +638,6 @@
(char __user * __user *)regs->u_regs[base + UREG_I2],
regs);
putname(filename);
- if (error == 0) {
- task_lock(current);
- current->ptrace &= ~PT_DTRACE;
- task_unlock(current);
- }
out:
return error;
}
diff --git a/arch/sparc/kernel/ptrace.c b/arch/sparc/kernel/ptrace.c
index 7f44ae6..81f3b92 100644
--- a/arch/sparc/kernel/ptrace.c
+++ b/arch/sparc/kernel/ptrace.c
@@ -170,8 +170,8 @@
switch (pos) {
case 32: /* PSR */
psr = regs->psr;
- psr &= ~PSR_ICC;
- psr |= (reg & PSR_ICC);
+ psr &= ~(PSR_ICC | PSR_SYSCALL);
+ psr |= (reg & (PSR_ICC | PSR_SYSCALL));
regs->psr = psr;
break;
case 33: /* PC */
@@ -441,6 +441,8 @@
break;
default:
+ if (request == PTRACE_SPARC_DETACH)
+ request = PTRACE_DETACH;
ret = ptrace_request(child, request, addr, data);
break;
}
diff --git a/arch/sparc/kernel/rtrap.S b/arch/sparc/kernel/rtrap.S
index 77ca6fd..ab818cdc 100644
--- a/arch/sparc/kernel/rtrap.S
+++ b/arch/sparc/kernel/rtrap.S
@@ -50,8 +50,9 @@
ret_trap_entry:
ret_trap_lockless_ipi:
andcc %t_psr, PSR_PS, %g0
+ sethi %hi(PSR_SYSCALL), %g1
be 1f
- nop
+ andn %t_psr, %g1, %t_psr
wr %t_psr, 0x0, %psr
b ret_trap_kernel
@@ -73,7 +74,6 @@
ld [%sp + STACKFRAME_SZ + PT_PSR], %t_psr
mov %l5, %o1
- mov %l6, %o2
call do_signal
add %sp, STACKFRAME_SZ, %o0 ! pt_regs ptr
@@ -81,6 +81,8 @@
ld [%sp + STACKFRAME_SZ + PT_PSR], %t_psr
clr %l6
ret_trap_continue:
+ sethi %hi(PSR_SYSCALL), %g1
+ andn %t_psr, %g1, %t_psr
wr %t_psr, 0x0, %psr
WRITE_PAUSE
@@ -137,8 +139,9 @@
LOAD_PT_PRIV(sp, t_psr, t_pc, t_npc)
or %t_pc, %t_npc, %g2
andcc %g2, 0x3, %g0
+ sethi %hi(PSR_SYSCALL), %g2
be 1f
- nop
+ andn %t_psr, %g2, %t_psr
b ret_trap_unaligned_pc
add %sp, STACKFRAME_SZ, %o0
@@ -201,6 +204,8 @@
1:
LOAD_PT_ALL(sp, t_psr, t_pc, t_npc, g1)
2:
+ sethi %hi(PSR_SYSCALL), %twin_tmp1
+ andn %t_psr, %twin_tmp1, %t_psr
wr %t_psr, 0x0, %psr
WRITE_PAUSE
diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c
index 3c13137..8a55c4f 100644
--- a/arch/sparc/kernel/setup.c
+++ b/arch/sparc/kernel/setup.c
@@ -180,11 +180,9 @@
/* This routine will in the future do all the nasty prom stuff
* to probe for the mmu type and its parameters, etc. This will
- * also be where SMP things happen plus the Sparc specific memory
- * physical memory probe as on the alpha.
+ * also be where SMP things happen.
*/
-extern int prom_probe_memory(void);
extern void sun4c_probe_vac(void);
extern char cputypval;
extern unsigned long start, end;
@@ -268,7 +266,6 @@
if (ARCH_SUN4C_SUN4)
sun4c_probe_vac();
load_mmu();
- (void) prom_probe_memory();
phys_base = 0xffffffffUL;
highest_paddr = 0UL;
diff --git a/arch/sparc/kernel/signal.c b/arch/sparc/kernel/signal.c
index 3c31229..3fd1df9 100644
--- a/arch/sparc/kernel/signal.c
+++ b/arch/sparc/kernel/signal.c
@@ -145,6 +145,9 @@
regs->psr = (up_psr & ~(PSR_ICC | PSR_EF))
| (regs->psr & (PSR_ICC | PSR_EF));
+ /* Prevent syscall restart. */
+ pt_regs_clear_syscall(regs);
+
err |= __get_user(fpu_save, &sf->fpu_save);
if (fpu_save)
@@ -199,6 +202,9 @@
regs->psr = (regs->psr & ~PSR_ICC) | (psr & PSR_ICC);
+ /* Prevent syscall restart. */
+ pt_regs_clear_syscall(regs);
+
err |= __get_user(fpu_save, &sf->fpu_save);
if (fpu_save)
@@ -245,15 +251,29 @@
static inline void __user *get_sigframe(struct sigaction *sa, struct pt_regs *regs, unsigned long framesize)
{
- unsigned long sp;
+ unsigned long sp = regs->u_regs[UREG_FP];
- sp = regs->u_regs[UREG_FP];
+ /*
+ * If we are on the alternate signal stack and would overflow it, don't.
+ * Return an always-bogus address instead so we will die with SIGSEGV.
+ */
+ if (on_sig_stack(sp) && !likely(on_sig_stack(sp - framesize)))
+ return (void __user *) -1L;
/* This is the X/Open sanctioned signal stack switching. */
if (sa->sa_flags & SA_ONSTACK) {
- if (!on_sig_stack(sp) && !((current->sas_ss_sp + current->sas_ss_size) & 7))
+ if (sas_ss_flags(sp) == 0)
sp = current->sas_ss_sp + current->sas_ss_size;
}
+
+ /* Always align the stack frame. This handles two cases. First,
+ * sigaltstack need not be mindful of platform specific stack
+ * alignment. Second, if we took this signal because the stack
+ * is not aligned properly, we'd like to take the signal cleanly
+ * and report that.
+ */
+ sp &= ~7UL;
+
return (void __user *)(sp - framesize);
}
@@ -493,26 +513,36 @@
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
-asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0, int restart_syscall)
+asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0)
{
- siginfo_t info;
- struct sparc_deliver_cookie cookie;
struct k_sigaction ka;
- int signr;
+ int restart_syscall;
sigset_t *oldset;
+ siginfo_t info;
+ int signr;
- cookie.restart_syscall = restart_syscall;
- cookie.orig_i0 = orig_i0;
+ if (pt_regs_is_syscall(regs) && (regs->psr & PSR_C))
+ restart_syscall = 1;
+ else
+ restart_syscall = 0;
if (test_thread_flag(TIF_RESTORE_SIGMASK))
oldset = ¤t->saved_sigmask;
else
oldset = ¤t->blocked;
- signr = get_signal_to_deliver(&info, &ka, regs, &cookie);
+ signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+
+ /* If the debugger messes with the program counter, it clears
+ * the software "in syscall" bit, directing us to not perform
+ * a syscall restart.
+ */
+ if (restart_syscall && !pt_regs_is_syscall(regs))
+ restart_syscall = 0;
+
if (signr > 0) {
- if (cookie.restart_syscall)
- syscall_restart(cookie.orig_i0, regs, &ka.sa);
+ if (restart_syscall)
+ syscall_restart(orig_i0, regs, &ka.sa);
handle_signal(signr, &ka, &info, oldset, regs);
/* a signal was successfully delivered; the saved
@@ -524,16 +554,16 @@
clear_thread_flag(TIF_RESTORE_SIGMASK);
return;
}
- if (cookie.restart_syscall &&
+ if (restart_syscall &&
(regs->u_regs[UREG_I0] == ERESTARTNOHAND ||
regs->u_regs[UREG_I0] == ERESTARTSYS ||
regs->u_regs[UREG_I0] == ERESTARTNOINTR)) {
/* replay the system call when we are done */
- regs->u_regs[UREG_I0] = cookie.orig_i0;
+ regs->u_regs[UREG_I0] = orig_i0;
regs->pc -= 4;
regs->npc -= 4;
}
- if (cookie.restart_syscall &&
+ if (restart_syscall &&
regs->u_regs[UREG_I0] == ERESTART_RESTARTBLOCK) {
regs->u_regs[UREG_G1] = __NR_restart_syscall;
regs->pc -= 4;
@@ -585,27 +615,3 @@
out:
return ret;
}
-
-void ptrace_signal_deliver(struct pt_regs *regs, void *cookie)
-{
- struct sparc_deliver_cookie *cp = cookie;
-
- if (cp->restart_syscall &&
- (regs->u_regs[UREG_I0] == ERESTARTNOHAND ||
- regs->u_regs[UREG_I0] == ERESTARTSYS ||
- regs->u_regs[UREG_I0] == ERESTARTNOINTR)) {
- /* replay the system call when we are done */
- regs->u_regs[UREG_I0] = cp->orig_i0;
- regs->pc -= 4;
- regs->npc -= 4;
- cp->restart_syscall = 0;
- }
-
- if (cp->restart_syscall &&
- regs->u_regs[UREG_I0] == ERESTART_RESTARTBLOCK) {
- regs->u_regs[UREG_G1] = __NR_restart_syscall;
- regs->pc -= 4;
- regs->npc -= 4;
- cp->restart_syscall = 0;
- }
-}
diff --git a/arch/sparc/kernel/sys_sparc.c b/arch/sparc/kernel/sys_sparc.c
index f188b5d..e995491 100644
--- a/arch/sparc/kernel/sys_sparc.c
+++ b/arch/sparc/kernel/sys_sparc.c
@@ -223,8 +223,7 @@
{
if (ARCH_SUN4C_SUN4 &&
(len > 0x20000000 ||
- ((flags & MAP_FIXED) &&
- addr < 0xe0000000 && addr + len > 0x20000000)))
+ (addr < 0xe0000000 && addr + len > 0x20000000)))
return -EINVAL;
/* See asm-sparc/uaccess.h */
diff --git a/arch/sparc/mm/fault.c b/arch/sparc/mm/fault.c
index e4d9c8e..abd5079 100644
--- a/arch/sparc/mm/fault.c
+++ b/arch/sparc/mm/fault.c
@@ -47,64 +47,15 @@
int vac_entries_per_context, vac_entries_per_segment;
int vac_entries_per_page;
-/* Nice, simple, prom library does all the sweating for us. ;) */
-int prom_probe_memory (void)
+/* Return how much physical memory we have. */
+unsigned long probe_memory(void)
{
- register struct linux_mlist_v0 *mlist;
- register unsigned long bytes, base_paddr, tally;
- register int i;
+ unsigned long total = 0;
+ int i;
- i = 0;
- mlist= *prom_meminfo()->v0_available;
- bytes = tally = mlist->num_bytes;
- base_paddr = (unsigned long) mlist->start_adr;
-
- sp_banks[0].base_addr = base_paddr;
- sp_banks[0].num_bytes = bytes;
+ for (i = 0; sp_banks[i].num_bytes; i++)
+ total += sp_banks[i].num_bytes;
- while (mlist->theres_more != (void *) 0){
- i++;
- mlist = mlist->theres_more;
- bytes = mlist->num_bytes;
- tally += bytes;
- if (i > SPARC_PHYS_BANKS-1) {
- printk ("The machine has more banks than "
- "this kernel can support\n"
- "Increase the SPARC_PHYS_BANKS "
- "setting (currently %d)\n",
- SPARC_PHYS_BANKS);
- i = SPARC_PHYS_BANKS-1;
- break;
- }
-
- sp_banks[i].base_addr = (unsigned long) mlist->start_adr;
- sp_banks[i].num_bytes = mlist->num_bytes;
- }
-
- i++;
- sp_banks[i].base_addr = 0xdeadbeef;
- sp_banks[i].num_bytes = 0;
-
- /* Now mask all bank sizes on a page boundary, it is all we can
- * use anyways.
- */
- for(i=0; sp_banks[i].num_bytes != 0; i++)
- sp_banks[i].num_bytes &= PAGE_MASK;
-
- return tally;
-}
-
-/* Traverse the memory lists in the prom to see how much physical we
- * have.
- */
-unsigned long
-probe_memory(void)
-{
- int total;
-
- total = prom_probe_memory();
-
- /* Oh man, much nicer, keep the dirt in promlib. */
return total;
}
diff --git a/arch/sparc/prom/init.c b/arch/sparc/prom/init.c
index 50abfb1..2fa3a47 100644
--- a/arch/sparc/prom/init.c
+++ b/arch/sparc/prom/init.c
@@ -21,8 +21,6 @@
/* The root node of the prom device tree. */
int prom_root_node;
-int prom_stdin, prom_stdout;
-
/* Pointer to the device tree operations structure. */
struct linux_nodeops *prom_nodeops;
@@ -74,11 +72,6 @@
(((unsigned long) prom_nodeops) == -1))
prom_halt();
- if(prom_vers == PROM_V2 || prom_vers == PROM_V3) {
- prom_stdout = *romvec->pv_v2bootargs.fd_stdout;
- prom_stdin = *romvec->pv_v2bootargs.fd_stdin;
- }
-
prom_meminit();
prom_ranges_init();
diff --git a/arch/sparc/prom/memory.c b/arch/sparc/prom/memory.c
index b0c0f9c..947f047d 100644
--- a/arch/sparc/prom/memory.c
+++ b/arch/sparc/prom/memory.c
@@ -1,215 +1,100 @@
-/* $Id: memory.c,v 1.15 2000/01/29 01:09:12 anton Exp $
- * memory.c: Prom routine for acquiring various bits of information
+/* memory.c: Prom routine for acquiring various bits of information
* about RAM on the machine, both virtual and physical.
*
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1995, 2008 David S. Miller (davem@davemloft.net)
* Copyright (C) 1997 Michael A. Griffith (grif@acm.org)
*/
#include <linux/kernel.h>
+#include <linux/sort.h>
#include <linux/init.h>
#include <asm/openprom.h>
#include <asm/sun4prom.h>
#include <asm/oplib.h>
+#include <asm/page.h>
-/* This routine, for consistency, returns the ram parameters in the
- * V0 prom memory descriptor format. I choose this format because I
- * think it was the easiest to work with. I feel the religious
- * arguments now... ;) Also, I return the linked lists sorted to
- * prevent paging_init() upset stomach as I have not yet written
- * the pepto-bismol kernel module yet.
- */
-
-struct linux_prom_registers prom_reg_memlist[64];
-struct linux_prom_registers prom_reg_tmp[64];
-
-struct linux_mlist_v0 prom_phys_total[64];
-struct linux_mlist_v0 prom_prom_taken[64];
-struct linux_mlist_v0 prom_phys_avail[64];
-
-struct linux_mlist_v0 *prom_ptot_ptr = prom_phys_total;
-struct linux_mlist_v0 *prom_ptak_ptr = prom_prom_taken;
-struct linux_mlist_v0 *prom_pavl_ptr = prom_phys_avail;
-
-struct linux_mem_v0 prom_memlist;
-
-
-/* Internal Prom library routine to sort a linux_mlist_v0 memory
- * list. Used below in initialization.
- */
-static void __init
-prom_sortmemlist(struct linux_mlist_v0 *thislist)
+static int __init prom_meminit_v0(void)
{
- int swapi = 0;
- int i, mitr, tmpsize;
- char *tmpaddr;
- char *lowest;
+ struct linux_mlist_v0 *p;
+ int index;
- for(i=0; thislist[i].theres_more; i++) {
- lowest = thislist[i].start_adr;
- for(mitr = i+1; thislist[mitr-1].theres_more; mitr++)
- if(thislist[mitr].start_adr < lowest) {
- lowest = thislist[mitr].start_adr;
- swapi = mitr;
- }
- if(lowest == thislist[i].start_adr) continue;
- tmpaddr = thislist[swapi].start_adr;
- tmpsize = thislist[swapi].num_bytes;
- for(mitr = swapi; mitr > i; mitr--) {
- thislist[mitr].start_adr = thislist[mitr-1].start_adr;
- thislist[mitr].num_bytes = thislist[mitr-1].num_bytes;
- }
- thislist[i].start_adr = tmpaddr;
- thislist[i].num_bytes = tmpsize;
+ index = 0;
+ for (p = *(romvec->pv_v0mem.v0_available); p; p = p->theres_more) {
+ sp_banks[index].base_addr = (unsigned long) p->start_adr;
+ sp_banks[index].num_bytes = p->num_bytes;
+ index++;
}
- return;
+ return index;
+}
+
+static int __init prom_meminit_v2(void)
+{
+ struct linux_prom_registers reg[64];
+ int node, size, num_ents, i;
+
+ node = prom_searchsiblings(prom_getchild(prom_root_node), "memory");
+ size = prom_getproperty(node, "available", (char *) reg, sizeof(reg));
+ num_ents = size / sizeof(struct linux_prom_registers);
+
+ for (i = 0; i < num_ents; i++) {
+ sp_banks[i].base_addr = reg[i].phys_addr;
+ sp_banks[i].num_bytes = reg[i].reg_size;
+ }
+
+ return num_ents;
+}
+
+static int __init prom_meminit_sun4(void)
+{
+#ifdef CONFIG_SUN4
+ sp_banks[0].base_addr = 0;
+ sp_banks[0].num_bytes = *(sun4_romvec->memoryavail);
+#endif
+ return 1;
+}
+
+static int sp_banks_cmp(const void *a, const void *b)
+{
+ const struct sparc_phys_banks *x = a, *y = b;
+
+ if (x->base_addr > y->base_addr)
+ return 1;
+ if (x->base_addr < y->base_addr)
+ return -1;
+ return 0;
}
/* Initialize the memory lists based upon the prom version. */
void __init prom_meminit(void)
{
- int node = 0;
- unsigned int iter, num_regs;
- struct linux_mlist_v0 *mptr; /* ptr for traversal */
+ int i, num_ents = 0;
- switch(prom_vers) {
+ switch (prom_vers) {
case PROM_V0:
- /* Nice, kind of easier to do in this case. */
- /* First, the total physical descriptors. */
- for(mptr = (*(romvec->pv_v0mem.v0_totphys)), iter=0;
- mptr; mptr=mptr->theres_more, iter++) {
- prom_phys_total[iter].start_adr = mptr->start_adr;
- prom_phys_total[iter].num_bytes = mptr->num_bytes;
- prom_phys_total[iter].theres_more = &prom_phys_total[iter+1];
- }
- prom_phys_total[iter-1].theres_more = NULL;
- /* Second, the total prom taken descriptors. */
- for(mptr = (*(romvec->pv_v0mem.v0_prommap)), iter=0;
- mptr; mptr=mptr->theres_more, iter++) {
- prom_prom_taken[iter].start_adr = mptr->start_adr;
- prom_prom_taken[iter].num_bytes = mptr->num_bytes;
- prom_prom_taken[iter].theres_more = &prom_prom_taken[iter+1];
- }
- prom_prom_taken[iter-1].theres_more = NULL;
- /* Last, the available physical descriptors. */
- for(mptr = (*(romvec->pv_v0mem.v0_available)), iter=0;
- mptr; mptr=mptr->theres_more, iter++) {
- prom_phys_avail[iter].start_adr = mptr->start_adr;
- prom_phys_avail[iter].num_bytes = mptr->num_bytes;
- prom_phys_avail[iter].theres_more = &prom_phys_avail[iter+1];
- }
- prom_phys_avail[iter-1].theres_more = NULL;
- /* Sort all the lists. */
- prom_sortmemlist(prom_phys_total);
- prom_sortmemlist(prom_prom_taken);
- prom_sortmemlist(prom_phys_avail);
+ num_ents = prom_meminit_v0();
break;
+
case PROM_V2:
case PROM_V3:
- /* Grrr, have to traverse the prom device tree ;( */
- node = prom_getchild(prom_root_node);
- node = prom_searchsiblings(node, "memory");
- num_regs = prom_getproperty(node, "available",
- (char *) prom_reg_memlist,
- sizeof(prom_reg_memlist));
- num_regs = (num_regs/sizeof(struct linux_prom_registers));
- for(iter=0; iter<num_regs; iter++) {
- prom_phys_avail[iter].start_adr =
- (char *) prom_reg_memlist[iter].phys_addr;
- prom_phys_avail[iter].num_bytes =
- (unsigned long) prom_reg_memlist[iter].reg_size;
- prom_phys_avail[iter].theres_more =
- &prom_phys_avail[iter+1];
- }
- prom_phys_avail[iter-1].theres_more = NULL;
-
- num_regs = prom_getproperty(node, "reg",
- (char *) prom_reg_memlist,
- sizeof(prom_reg_memlist));
- num_regs = (num_regs/sizeof(struct linux_prom_registers));
- for(iter=0; iter<num_regs; iter++) {
- prom_phys_total[iter].start_adr =
- (char *) prom_reg_memlist[iter].phys_addr;
- prom_phys_total[iter].num_bytes =
- (unsigned long) prom_reg_memlist[iter].reg_size;
- prom_phys_total[iter].theres_more =
- &prom_phys_total[iter+1];
- }
- prom_phys_total[iter-1].theres_more = NULL;
-
- node = prom_getchild(prom_root_node);
- node = prom_searchsiblings(node, "virtual-memory");
- num_regs = prom_getproperty(node, "available",
- (char *) prom_reg_memlist,
- sizeof(prom_reg_memlist));
- num_regs = (num_regs/sizeof(struct linux_prom_registers));
-
- /* Convert available virtual areas to taken virtual
- * areas. First sort, then convert.
- */
- for(iter=0; iter<num_regs; iter++) {
- prom_prom_taken[iter].start_adr =
- (char *) prom_reg_memlist[iter].phys_addr;
- prom_prom_taken[iter].num_bytes =
- (unsigned long) prom_reg_memlist[iter].reg_size;
- prom_prom_taken[iter].theres_more =
- &prom_prom_taken[iter+1];
- }
- prom_prom_taken[iter-1].theres_more = NULL;
-
- prom_sortmemlist(prom_prom_taken);
-
- /* Finally, convert. */
- for(iter=0; iter<num_regs; iter++) {
- prom_prom_taken[iter].start_adr =
- prom_prom_taken[iter].start_adr +
- prom_prom_taken[iter].num_bytes;
- prom_prom_taken[iter].num_bytes =
- prom_prom_taken[iter+1].start_adr -
- prom_prom_taken[iter].start_adr;
- }
- prom_prom_taken[iter-1].num_bytes =
- 0xffffffff - (unsigned long) prom_prom_taken[iter-1].start_adr;
-
- /* Sort the other two lists. */
- prom_sortmemlist(prom_phys_total);
- prom_sortmemlist(prom_phys_avail);
+ num_ents = prom_meminit_v2();
break;
case PROM_SUN4:
-#ifdef CONFIG_SUN4
- /* how simple :) */
- prom_phys_total[0].start_adr = NULL;
- prom_phys_total[0].num_bytes = *(sun4_romvec->memorysize);
- prom_phys_total[0].theres_more = NULL;
- prom_prom_taken[0].start_adr = NULL;
- prom_prom_taken[0].num_bytes = 0x0;
- prom_prom_taken[0].theres_more = NULL;
- prom_phys_avail[0].start_adr = NULL;
- prom_phys_avail[0].num_bytes = *(sun4_romvec->memoryavail);
- prom_phys_avail[0].theres_more = NULL;
-#endif
+ num_ents = prom_meminit_sun4();
break;
default:
break;
- };
+ }
+ sort(sp_banks, num_ents, sizeof(struct sparc_phys_banks),
+ sp_banks_cmp, NULL);
- /* Link all the lists into the top-level descriptor. */
- prom_memlist.v0_totphys=&prom_ptot_ptr;
- prom_memlist.v0_prommap=&prom_ptak_ptr;
- prom_memlist.v0_available=&prom_pavl_ptr;
+ /* Sentinel. */
+ sp_banks[num_ents].base_addr = 0xdeadbeef;
+ sp_banks[num_ents].num_bytes = 0;
- return;
-}
-
-/* This returns a pointer to our libraries internal v0 format
- * memory descriptor.
- */
-struct linux_mem_v0 *
-prom_meminfo(void)
-{
- return &prom_memlist;
+ for (i = 0; i < num_ents; i++)
+ sp_banks[i].num_bytes &= PAGE_MASK;
}
diff --git a/arch/sparc64/kernel/etrap.S b/arch/sparc64/kernel/etrap.S
index b49d3b6..f25e1da 100644
--- a/arch/sparc64/kernel/etrap.S
+++ b/arch/sparc64/kernel/etrap.S
@@ -27,11 +27,12 @@
.text
.align 64
- .globl etrap, etrap_irq, etraptl1
+ .globl etrap_syscall, etrap, etrap_irq, etraptl1
etrap: rdpr %pil, %g2
-etrap_irq:
- TRAP_LOAD_THREAD_REG(%g6, %g1)
+etrap_irq: clr %g3
+etrap_syscall: TRAP_LOAD_THREAD_REG(%g6, %g1)
rdpr %tstate, %g1
+ or %g1, %g3, %g1
sllx %g2, 20, %g3
andcc %g1, TSTATE_PRIV, %g0
or %g1, %g3, %g1
diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c
index dbf2fc2..112b09f 100644
--- a/arch/sparc64/kernel/pci.c
+++ b/arch/sparc64/kernel/pci.c
@@ -350,8 +350,7 @@
struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
struct device_node *node,
- struct pci_bus *bus, int devfn,
- int host_controller)
+ struct pci_bus *bus, int devfn)
{
struct dev_archdata *sd;
struct pci_dev *dev;
@@ -390,43 +389,28 @@
dev->devfn = devfn;
dev->multifunction = 0; /* maybe a lie? */
- if (host_controller) {
- if (tlb_type != hypervisor) {
- pci_read_config_word(dev, PCI_VENDOR_ID,
- &dev->vendor);
- pci_read_config_word(dev, PCI_DEVICE_ID,
- &dev->device);
- } else {
- dev->vendor = PCI_VENDOR_ID_SUN;
- dev->device = 0x80f0;
- }
- dev->cfg_size = 256;
- dev->class = PCI_CLASS_BRIDGE_HOST << 8;
- sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
- 0x00, PCI_SLOT(devfn), PCI_FUNC(devfn));
- } else {
- dev->vendor = of_getintprop_default(node, "vendor-id", 0xffff);
- dev->device = of_getintprop_default(node, "device-id", 0xffff);
- dev->subsystem_vendor =
- of_getintprop_default(node, "subsystem-vendor-id", 0);
- dev->subsystem_device =
- of_getintprop_default(node, "subsystem-id", 0);
+ dev->vendor = of_getintprop_default(node, "vendor-id", 0xffff);
+ dev->device = of_getintprop_default(node, "device-id", 0xffff);
+ dev->subsystem_vendor =
+ of_getintprop_default(node, "subsystem-vendor-id", 0);
+ dev->subsystem_device =
+ of_getintprop_default(node, "subsystem-id", 0);
- dev->cfg_size = pci_cfg_space_size(dev);
+ dev->cfg_size = pci_cfg_space_size(dev);
- /* We can't actually use the firmware value, we have
- * to read what is in the register right now. One
- * reason is that in the case of IDE interfaces the
- * firmware can sample the value before the the IDE
- * interface is programmed into native mode.
- */
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
- dev->class = class >> 8;
- dev->revision = class & 0xff;
+ /* We can't actually use the firmware value, we have
+ * to read what is in the register right now. One
+ * reason is that in the case of IDE interfaces the
+ * firmware can sample the value before the the IDE
+ * interface is programmed into native mode.
+ */
+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
+ dev->class = class >> 8;
+ dev->revision = class & 0xff;
- sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
- dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
- }
+ sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
+ dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
+
if (ofpci_verbose)
printk(" class: 0x%x device name: %s\n",
dev->class, pci_name(dev));
@@ -441,26 +425,21 @@
dev->current_state = 4; /* unknown power state */
dev->error_state = pci_channel_io_normal;
- if (host_controller) {
+ if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
+ /* a PCI-PCI bridge */
dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
dev->rom_base_reg = PCI_ROM_ADDRESS1;
- dev->irq = PCI_IRQ_NONE;
+ } else if (!strcmp(type, "cardbus")) {
+ dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
} else {
- if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
- /* a PCI-PCI bridge */
- dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
- dev->rom_base_reg = PCI_ROM_ADDRESS1;
- } else if (!strcmp(type, "cardbus")) {
- dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
- } else {
- dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
- dev->rom_base_reg = PCI_ROM_ADDRESS;
+ dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
+ dev->rom_base_reg = PCI_ROM_ADDRESS;
- dev->irq = sd->op->irqs[0];
- if (dev->irq == 0xffffffff)
- dev->irq = PCI_IRQ_NONE;
- }
+ dev->irq = sd->op->irqs[0];
+ if (dev->irq == 0xffffffff)
+ dev->irq = PCI_IRQ_NONE;
}
+
pci_parse_of_addrs(sd->op, node, dev);
if (ofpci_verbose)
@@ -749,7 +728,7 @@
prev_devfn = devfn;
/* create a new pci_dev for this device */
- dev = of_create_pci_dev(pbm, child, bus, devfn, 0);
+ dev = of_create_pci_dev(pbm, child, bus, devfn);
if (!dev)
continue;
if (ofpci_verbose)
@@ -796,48 +775,9 @@
pci_bus_register_of_sysfs(child_bus);
}
-int pci_host_bridge_read_pci_cfg(struct pci_bus *bus_dev,
- unsigned int devfn,
- int where, int size,
- u32 *value)
-{
- static u8 fake_pci_config[] = {
- 0x8e, 0x10, /* Vendor: 0x108e (Sun) */
- 0xf0, 0x80, /* Device: 0x80f0 (Fire) */
- 0x46, 0x01, /* Command: 0x0146 (SERR, PARITY, MASTER, MEM) */
- 0xa0, 0x22, /* Status: 0x02a0 (DEVSEL_MED, FB2B, 66MHZ) */
- 0x00, 0x00, 0x00, 0x06, /* Class: 0x06000000 host bridge */
- 0x00, /* Cacheline: 0x00 */
- 0x40, /* Latency: 0x40 */
- 0x00, /* Header-Type: 0x00 normal */
- };
-
- *value = 0;
- if (where >= 0 && where < sizeof(fake_pci_config) &&
- (where + size) >= 0 &&
- (where + size) < sizeof(fake_pci_config) &&
- size <= sizeof(u32)) {
- while (size--) {
- *value <<= 8;
- *value |= fake_pci_config[where + size];
- }
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-int pci_host_bridge_write_pci_cfg(struct pci_bus *bus_dev,
- unsigned int devfn,
- int where, int size,
- u32 value)
-{
- return PCIBIOS_SUCCESSFUL;
-}
-
struct pci_bus * __devinit pci_scan_one_pbm(struct pci_pbm_info *pbm)
{
struct device_node *node = pbm->prom_node;
- struct pci_dev *host_pdev;
struct pci_bus *bus;
printk("PCI: Scanning PBM %s\n", node->full_name);
@@ -855,10 +795,6 @@
bus->resource[0] = &pbm->io_space;
bus->resource[1] = &pbm->mem_space;
- /* Create the dummy host bridge and link it in. */
- host_pdev = of_create_pci_dev(pbm, node, bus, 0x00, 1);
- bus->self = host_pdev;
-
pci_of_scan_bus(pbm, node, bus);
pci_bus_add_devices(bus);
pci_bus_register_of_sysfs(bus);
diff --git a/arch/sparc64/kernel/pci_common.c b/arch/sparc64/kernel/pci_common.c
index 923e0bc..19fa621 100644
--- a/arch/sparc64/kernel/pci_common.c
+++ b/arch/sparc64/kernel/pci_common.c
@@ -264,9 +264,6 @@
unsigned int func = PCI_FUNC(devfn);
unsigned long ret;
- if (!bus && devfn == 0x00)
- return pci_host_bridge_read_pci_cfg(bus_dev, devfn, where,
- size, value);
if (config_out_of_range(pbm, bus, devfn, where)) {
ret = ~0UL;
} else {
@@ -300,9 +297,6 @@
unsigned int func = PCI_FUNC(devfn);
unsigned long ret;
- if (!bus && devfn == 0x00)
- return pci_host_bridge_write_pci_cfg(bus_dev, devfn, where,
- size, value);
if (config_out_of_range(pbm, bus, devfn, where)) {
/* Do nothing. */
} else {
diff --git a/arch/sparc64/kernel/pci_impl.h b/arch/sparc64/kernel/pci_impl.h
index 218bac4..c385d12 100644
--- a/arch/sparc64/kernel/pci_impl.h
+++ b/arch/sparc64/kernel/pci_impl.h
@@ -167,15 +167,6 @@
extern struct pci_bus *pci_scan_one_pbm(struct pci_pbm_info *pbm);
extern void pci_determine_mem_io_space(struct pci_pbm_info *pbm);
-extern int pci_host_bridge_read_pci_cfg(struct pci_bus *bus_dev,
- unsigned int devfn,
- int where, int size,
- u32 *value);
-extern int pci_host_bridge_write_pci_cfg(struct pci_bus *bus_dev,
- unsigned int devfn,
- int where, int size,
- u32 value);
-
/* Error reporting support. */
extern void pci_scan_for_target_abort(struct pci_pbm_info *, struct pci_bus *);
extern void pci_scan_for_master_abort(struct pci_pbm_info *, struct pci_bus *);
diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c
index 0560137..4129c04 100644
--- a/arch/sparc64/kernel/process.c
+++ b/arch/sparc64/kernel/process.c
@@ -503,6 +503,8 @@
unsigned long stack_size)
{
int __user *parent_tid_ptr, *child_tid_ptr;
+ unsigned long orig_i1 = regs->u_regs[UREG_I1];
+ long ret;
#ifdef CONFIG_COMPAT
if (test_thread_flag(TIF_32BIT)) {
@@ -515,9 +517,19 @@
child_tid_ptr = (int __user *) regs->u_regs[UREG_I4];
}
- return do_fork(clone_flags, stack_start,
- regs, stack_size,
- parent_tid_ptr, child_tid_ptr);
+ ret = do_fork(clone_flags, stack_start,
+ regs, stack_size,
+ parent_tid_ptr, child_tid_ptr);
+
+ /* If we get an error and potentially restart the system
+ * call, we're screwed because copy_thread() clobbered
+ * the parent's %o1. So detect that case and restore it
+ * here.
+ */
+ if ((unsigned long)ret >= -ERESTART_RESTARTBLOCK)
+ regs->u_regs[UREG_I1] = orig_i1;
+
+ return ret;
}
/* Copy a Sparc thread. The fork() return value conventions
@@ -591,12 +603,6 @@
if (clone_flags & CLONE_SETTLS)
t->kregs->u_regs[UREG_G7] = regs->u_regs[UREG_I3];
- /* We do not want to accidently trigger system call restart
- * handling in the new thread. Therefore, clear out the trap
- * type, which will make pt_regs_regs_is_syscall() return false.
- */
- pt_regs_clear_trap_type(t->kregs);
-
return 0;
}
diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c
index e9fc0aa..f6c9fc9 100644
--- a/arch/sparc64/kernel/ptrace.c
+++ b/arch/sparc64/kernel/ptrace.c
@@ -287,11 +287,11 @@
32 * sizeof(u64),
33 * sizeof(u64));
if (!ret) {
- /* Only the condition codes can be modified
- * in the %tstate register.
+ /* Only the condition codes and the "in syscall"
+ * state can be modified in the %tstate register.
*/
- tstate &= (TSTATE_ICC | TSTATE_XCC);
- regs->tstate &= ~(TSTATE_ICC | TSTATE_XCC);
+ tstate &= (TSTATE_ICC | TSTATE_XCC | TSTATE_SYSCALL);
+ regs->tstate &= ~(TSTATE_ICC | TSTATE_XCC | TSTATE_SYSCALL);
regs->tstate |= tstate;
}
}
@@ -657,8 +657,10 @@
switch (pos) {
case 32: /* PSR */
tstate = regs->tstate;
- tstate &= ~(TSTATE_ICC | TSTATE_XCC);
+ tstate &= ~(TSTATE_ICC | TSTATE_XCC | TSTATE_SYSCALL);
tstate |= psr_to_tstate_icc(reg);
+ if (reg & PSR_SYSCALL)
+ tstate |= TSTATE_SYSCALL;
regs->tstate = tstate;
break;
case 33: /* PC */
@@ -944,6 +946,8 @@
break;
default:
+ if (request == PTRACE_SPARC_DETACH)
+ request = PTRACE_DETACH;
ret = compat_ptrace_request(child, request, addr, data);
break;
}
@@ -1036,6 +1040,8 @@
break;
default:
+ if (request == PTRACE_SPARC_DETACH)
+ request = PTRACE_DETACH;
ret = ptrace_request(child, request, addr, data);
break;
}
diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S
index ecf6753..b9b785f 100644
--- a/arch/sparc64/kernel/rtrap.S
+++ b/arch/sparc64/kernel/rtrap.S
@@ -257,6 +257,7 @@
wr %o3, %g0, %y
wrpr %l4, 0x0, %pil
wrpr %g0, 0x1, %tl
+ andn %l1, TSTATE_SYSCALL, %l1
wrpr %l1, %g0, %tstate
wrpr %l2, %g0, %tpc
wrpr %o2, %g0, %tnpc
diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c
index f2d88d8f..2378482 100644
--- a/arch/sparc64/kernel/signal.c
+++ b/arch/sparc64/kernel/signal.c
@@ -332,6 +332,9 @@
regs->tpc = tpc;
regs->tnpc = tnpc;
+ /* Prevent syscall restart. */
+ pt_regs_clear_syscall(regs);
+
sigdelsetmask(&set, ~_BLOCKABLE);
spin_lock_irq(¤t->sighand->siglock);
current->blocked = set;
@@ -373,16 +376,29 @@
static inline void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, unsigned long framesize)
{
- unsigned long sp;
+ unsigned long sp = regs->u_regs[UREG_FP] + STACK_BIAS;
- sp = regs->u_regs[UREG_FP] + STACK_BIAS;
+ /*
+ * If we are on the alternate signal stack and would overflow it, don't.
+ * Return an always-bogus address instead so we will die with SIGSEGV.
+ */
+ if (on_sig_stack(sp) && !likely(on_sig_stack(sp - framesize)))
+ return (void __user *) -1L;
/* This is the X/Open sanctioned signal stack switching. */
if (ka->sa.sa_flags & SA_ONSTACK) {
- if (!on_sig_stack(sp) &&
- !((current->sas_ss_sp + current->sas_ss_size) & 7))
+ if (sas_ss_flags(sp) == 0)
sp = current->sas_ss_sp + current->sas_ss_size;
}
+
+ /* Always align the stack frame. This handles two cases. First,
+ * sigaltstack need not be mindful of platform specific stack
+ * alignment. Second, if we took this signal because the stack
+ * is not aligned properly, we'd like to take the signal cleanly
+ * and report that.
+ */
+ sp &= ~7UL;
+
return (void __user *)(sp - framesize);
}
@@ -483,7 +499,7 @@
}
static inline void syscall_restart(unsigned long orig_i0, struct pt_regs *regs,
- struct sigaction *sa)
+ struct sigaction *sa)
{
switch (regs->u_regs[UREG_I0]) {
case ERESTART_RESTARTBLOCK:
@@ -509,18 +525,17 @@
*/
static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
{
- struct signal_deliver_cookie cookie;
struct k_sigaction ka;
+ int restart_syscall;
sigset_t *oldset;
siginfo_t info;
int signr;
- if (pt_regs_is_syscall(regs)) {
- pt_regs_clear_trap_type(regs);
- cookie.restart_syscall = 1;
+ if (pt_regs_is_syscall(regs) &&
+ (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) {
+ restart_syscall = 1;
} else
- cookie.restart_syscall = 0;
- cookie.orig_i0 = orig_i0;
+ restart_syscall = 0;
if (test_thread_flag(TIF_RESTORE_SIGMASK))
oldset = ¤t->saved_sigmask;
@@ -530,16 +545,25 @@
#ifdef CONFIG_COMPAT
if (test_thread_flag(TIF_32BIT)) {
extern void do_signal32(sigset_t *, struct pt_regs *,
- struct signal_deliver_cookie *);
- do_signal32(oldset, regs, &cookie);
+ int restart_syscall,
+ unsigned long orig_i0);
+ do_signal32(oldset, regs, restart_syscall, orig_i0);
return;
}
#endif
- signr = get_signal_to_deliver(&info, &ka, regs, &cookie);
+ signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+
+ /* If the debugger messes with the program counter, it clears
+ * the software "in syscall" bit, directing us to not perform
+ * a syscall restart.
+ */
+ if (restart_syscall && !pt_regs_is_syscall(regs))
+ restart_syscall = 0;
+
if (signr > 0) {
- if (cookie.restart_syscall)
- syscall_restart(cookie.orig_i0, regs, &ka.sa);
+ if (restart_syscall)
+ syscall_restart(orig_i0, regs, &ka.sa);
handle_signal(signr, &ka, &info, oldset, regs);
/* a signal was successfully delivered; the saved
@@ -551,16 +575,16 @@
clear_thread_flag(TIF_RESTORE_SIGMASK);
return;
}
- if (cookie.restart_syscall &&
+ if (restart_syscall &&
(regs->u_regs[UREG_I0] == ERESTARTNOHAND ||
regs->u_regs[UREG_I0] == ERESTARTSYS ||
regs->u_regs[UREG_I0] == ERESTARTNOINTR)) {
/* replay the system call when we are done */
- regs->u_regs[UREG_I0] = cookie.orig_i0;
+ regs->u_regs[UREG_I0] = orig_i0;
regs->tpc -= 4;
regs->tnpc -= 4;
}
- if (cookie.restart_syscall &&
+ if (restart_syscall &&
regs->u_regs[UREG_I0] == ERESTART_RESTARTBLOCK) {
regs->u_regs[UREG_G1] = __NR_restart_syscall;
regs->tpc -= 4;
@@ -581,26 +605,3 @@
if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
do_signal(regs, orig_i0);
}
-
-void ptrace_signal_deliver(struct pt_regs *regs, void *cookie)
-{
- struct signal_deliver_cookie *cp = cookie;
-
- if (cp->restart_syscall &&
- (regs->u_regs[UREG_I0] == ERESTARTNOHAND ||
- regs->u_regs[UREG_I0] == ERESTARTSYS ||
- regs->u_regs[UREG_I0] == ERESTARTNOINTR)) {
- /* replay the system call when we are done */
- regs->u_regs[UREG_I0] = cp->orig_i0;
- regs->tpc -= 4;
- regs->tnpc -= 4;
- cp->restart_syscall = 0;
- }
- if (cp->restart_syscall &&
- regs->u_regs[UREG_I0] == ERESTART_RESTARTBLOCK) {
- regs->u_regs[UREG_G1] = __NR_restart_syscall;
- regs->tpc -= 4;
- regs->tnpc -= 4;
- cp->restart_syscall = 0;
- }
-}
diff --git a/arch/sparc64/kernel/signal32.c b/arch/sparc64/kernel/signal32.c
index 91f8d08..3f19e9a 100644
--- a/arch/sparc64/kernel/signal32.c
+++ b/arch/sparc64/kernel/signal32.c
@@ -268,6 +268,9 @@
regs->tstate &= ~(TSTATE_ICC|TSTATE_XCC);
regs->tstate |= psr_to_tstate_icc(psr);
+ /* Prevent syscall restart. */
+ pt_regs_clear_syscall(regs);
+
err |= __get_user(fpu_save, &sf->fpu_save);
if (fpu_save)
err |= restore_fpu_state32(regs, &sf->fpu_state);
@@ -351,6 +354,9 @@
regs->tstate &= ~(TSTATE_ICC|TSTATE_XCC);
regs->tstate |= psr_to_tstate_icc(psr);
+ /* Prevent syscall restart. */
+ pt_regs_clear_syscall(regs);
+
err |= __get_user(fpu_save, &sf->fpu_save);
if (fpu_save)
err |= restore_fpu_state32(regs, &sf->fpu_state);
@@ -400,11 +406,27 @@
regs->u_regs[UREG_FP] &= 0x00000000ffffffffUL;
sp = regs->u_regs[UREG_FP];
+ /*
+ * If we are on the alternate signal stack and would overflow it, don't.
+ * Return an always-bogus address instead so we will die with SIGSEGV.
+ */
+ if (on_sig_stack(sp) && !likely(on_sig_stack(sp - framesize)))
+ return (void __user *) -1L;
+
/* This is the X/Open sanctioned signal stack switching. */
if (sa->sa_flags & SA_ONSTACK) {
- if (!on_sig_stack(sp) && !((current->sas_ss_sp + current->sas_ss_size) & 7))
+ if (sas_ss_flags(sp) == 0)
sp = current->sas_ss_sp + current->sas_ss_size;
}
+
+ /* Always align the stack frame. This handles two cases. First,
+ * sigaltstack need not be mindful of platform specific stack
+ * alignment. Second, if we took this signal because the stack
+ * is not aligned properly, we'd like to take the signal cleanly
+ * and report that.
+ */
+ sp &= ~7UL;
+
return (void __user *)(sp - framesize);
}
@@ -746,16 +768,24 @@
* mistake.
*/
void do_signal32(sigset_t *oldset, struct pt_regs * regs,
- struct signal_deliver_cookie *cookie)
+ int restart_syscall, unsigned long orig_i0)
{
struct k_sigaction ka;
siginfo_t info;
int signr;
- signr = get_signal_to_deliver(&info, &ka, regs, cookie);
+ signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+
+ /* If the debugger messes with the program counter, it clears
+ * the "in syscall" bit, directing us to not perform a syscall
+ * restart.
+ */
+ if (restart_syscall && !pt_regs_is_syscall(regs))
+ restart_syscall = 0;
+
if (signr > 0) {
- if (cookie->restart_syscall)
- syscall_restart32(cookie->orig_i0, regs, &ka.sa);
+ if (restart_syscall)
+ syscall_restart32(orig_i0, regs, &ka.sa);
handle_signal32(signr, &ka, &info, oldset, regs);
/* a signal was successfully delivered; the saved
@@ -767,16 +797,16 @@
clear_thread_flag(TIF_RESTORE_SIGMASK);
return;
}
- if (cookie->restart_syscall &&
+ if (restart_syscall &&
(regs->u_regs[UREG_I0] == ERESTARTNOHAND ||
regs->u_regs[UREG_I0] == ERESTARTSYS ||
regs->u_regs[UREG_I0] == ERESTARTNOINTR)) {
/* replay the system call when we are done */
- regs->u_regs[UREG_I0] = cookie->orig_i0;
+ regs->u_regs[UREG_I0] = orig_i0;
regs->tpc -= 4;
regs->tnpc -= 4;
}
- if (cookie->restart_syscall &&
+ if (restart_syscall &&
regs->u_regs[UREG_I0] == ERESTART_RESTARTBLOCK) {
regs->u_regs[UREG_G1] = __NR_restart_syscall;
regs->tpc -= 4;
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index 3aba476..0d6403a 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -865,21 +865,14 @@
void *info = call_data->info;
clear_softint(1 << irq);
-
- irq_enter();
-
- if (!call_data->wait) {
- /* let initiator proceed after getting data */
- atomic_inc(&call_data->finished);
- }
-
- func(info);
-
- irq_exit();
-
if (call_data->wait) {
/* let initiator proceed only after completion */
+ func(info);
atomic_inc(&call_data->finished);
+ } else {
+ /* let initiator proceed after getting data */
+ atomic_inc(&call_data->finished);
+ func(info);
}
}
@@ -1041,9 +1034,7 @@
void smp_receive_signal_client(int irq, struct pt_regs *regs)
{
- irq_enter();
clear_softint(1 << irq);
- irq_exit();
}
void smp_new_mmu_context_version_client(int irq, struct pt_regs *regs)
@@ -1051,8 +1042,6 @@
struct mm_struct *mm;
unsigned long flags;
- irq_enter();
-
clear_softint(1 << irq);
/* See if we need to allocate a new TLB context because
@@ -1072,8 +1061,6 @@
load_secondary_context(mm);
__flush_tlb_mm(CTX_HWBITS(mm->context),
SECONDARY_CONTEXT);
-
- irq_exit();
}
void smp_new_mmu_context_version(void)
@@ -1239,8 +1226,6 @@
{
clear_softint(1 << irq);
- irq_enter();
-
preempt_disable();
__asm__ __volatile__("flushw");
@@ -1253,8 +1238,6 @@
prom_world(0);
preempt_enable();
-
- irq_exit();
}
/* /proc/profile writes can call this, don't __init it please. */
diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c
index 8d4761f..0dbc941 100644
--- a/arch/sparc64/kernel/sys_sparc.c
+++ b/arch/sparc64/kernel/sys_sparc.c
@@ -549,13 +549,13 @@
if (len >= STACK_TOP32)
return -EINVAL;
- if ((flags & MAP_FIXED) && addr > STACK_TOP32 - len)
+ if (addr > STACK_TOP32 - len)
return -EINVAL;
} else {
if (len >= VA_EXCLUDE_START)
return -EINVAL;
- if ((flags & MAP_FIXED) && invalid_64bit_range(addr, len))
+ if (invalid_64bit_range(addr, len))
return -EINVAL;
}
diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c
index 161ce47..1aa4288 100644
--- a/arch/sparc64/kernel/sys_sparc32.c
+++ b/arch/sparc64/kernel/sys_sparc32.c
@@ -236,13 +236,6 @@
/* 32-bit timeval and related flotsam. */
-static long get_tv32(struct timeval *o, struct compat_timeval __user *i)
-{
- return (!access_ok(VERIFY_READ, i, sizeof(*i)) ||
- (__get_user(o->tv_sec, &i->tv_sec) |
- __get_user(o->tv_usec, &i->tv_usec)));
-}
-
static inline long put_tv32(struct compat_timeval __user *o, struct timeval *i)
{
return (!access_ok(VERIFY_WRITE, o, sizeof(*o)) ||
@@ -757,30 +750,6 @@
return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL);
}
-asmlinkage long sys32_utimes(char __user *filename,
- struct compat_timeval __user *tvs)
-{
- struct timespec tv[2];
-
- if (tvs) {
- struct timeval ktvs[2];
- if (get_tv32(&ktvs[0], tvs) ||
- get_tv32(&ktvs[1], 1+tvs))
- return -EFAULT;
-
- if (ktvs[0].tv_usec < 0 || ktvs[0].tv_usec >= 1000000 ||
- ktvs[1].tv_usec < 0 || ktvs[1].tv_usec >= 1000000)
- return -EINVAL;
-
- tv[0].tv_sec = ktvs[0].tv_sec;
- tv[0].tv_nsec = 1000 * ktvs[0].tv_usec;
- tv[1].tv_sec = ktvs[1].tv_sec;
- tv[1].tv_nsec = 1000 * ktvs[1].tv_usec;
- }
-
- return do_utimes(AT_FDCWD, filename, tvs ? tv : NULL, 0);
-}
-
/* These are here just in case some old sparc32 binary calls it. */
asmlinkage long sys32_pause(void)
{
diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S
index a4fef2b..8b5282d 100644
--- a/arch/sparc64/kernel/systbls.S
+++ b/arch/sparc64/kernel/systbls.S
@@ -45,7 +45,7 @@
/*120*/ .word compat_sys_readv, compat_sys_writev, sys32_settimeofday, sys32_fchown16, sys_fchmod
.word sys_nis_syscall, sys32_setreuid16, sys32_setregid16, sys_rename, sys_truncate
/*130*/ .word sys_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall
- .word sys_nis_syscall, sys32_mkdir, sys_rmdir, sys32_utimes, compat_sys_stat64
+ .word sys_nis_syscall, sys32_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64
/*140*/ .word sys32_sendfile64, sys_nis_syscall, sys32_futex, sys_gettid, compat_sys_getrlimit
.word compat_sys_setrlimit, sys_pivot_root, sys32_prctl, sys_pciconfig_read, sys_pciconfig_write
/*150*/ .word sys_nis_syscall, sys_inotify_init, sys_inotify_add_watch, sys_poll, sys_getdents64
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index 4cad0b3..a9828d7 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -610,8 +610,6 @@
static void __init inherit_prom_mappings(void)
{
- read_obp_translations();
-
/* Now fixup OBP's idea about where we really are mapped. */
printk("Remapping the kernel... ");
remap_kernel();
@@ -771,6 +769,9 @@
initrd_end = ramdisk_image + sparc_ramdisk_size;
lmb_reserve(initrd_start, initrd_end);
+
+ initrd_start += PAGE_OFFSET;
+ initrd_end += PAGE_OFFSET;
}
#endif
}
@@ -1744,7 +1745,17 @@
lmb_init();
- /* Find available physical memory... */
+ /* Find available physical memory...
+ *
+ * Read it twice in order to work around a bug in openfirmware.
+ * The call to grab this table itself can cause openfirmware to
+ * allocate memory, which in turn can take away some space from
+ * the list of available memory. Reading it twice makes sure
+ * we really do get the final value.
+ */
+ read_obp_translations();
+ read_obp_memory("reg", &pall[0], &pall_ents);
+ read_obp_memory("available", &pavail[0], &pavail_ents);
read_obp_memory("available", &pavail[0], &pavail_ents);
phys_base = 0xffffffffffffffffUL;
@@ -1785,8 +1796,6 @@
inherit_prom_mappings();
- read_obp_memory("reg", &pall[0], &pall_ents);
-
init_kpte_bitmap();
/* Ok, we can use our TLB miss and window trap handlers safely. */
@@ -2362,16 +2371,3 @@
__asm__ __volatile__("wrpr %0, 0, %%pstate"
: : "r" (pstate));
}
-
-#ifdef CONFIG_MEMORY_HOTPLUG
-
-void online_page(struct page *page)
-{
- ClearPageReserved(page);
- init_page_count(page);
- __free_page(page);
- totalram_pages++;
- num_physpages++;
-}
-
-#endif /* CONFIG_MEMORY_HOTPLUG */
diff --git a/arch/um/Kconfig.char b/arch/um/Kconfig.char
index 3a4b396..1b238eb 100644
--- a/arch/um/Kconfig.char
+++ b/arch/um/Kconfig.char
@@ -145,14 +145,14 @@
systems, it is safe to say N.
config RAW_DRIVER
- tristate "RAW driver (/dev/raw/rawN) (OBSOLETE)"
+ tristate "RAW driver (/dev/raw/rawN)"
+ depends on BLOCK
help
The raw driver permits block devices to be bound to /dev/raw/rawN.
Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
See the raw(8) manpage for more details.
- The raw driver is deprecated and will be removed soon.
- Applications should simply open the device (eg /dev/hda1)
+ Applications should preferably open the device (eg /dev/hda1)
with the O_DIRECT flag.
config MAX_RAW_DEVS
diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c
index 0257640..cfeb3f4 100644
--- a/arch/um/drivers/chan_user.c
+++ b/arch/um/drivers/chan_user.c
@@ -11,6 +11,7 @@
#include <termios.h>
#include <sys/ioctl.h>
#include "chan_user.h"
+#include "kern_constants.h"
#include "os.h"
#include "um_malloc.h"
#include "user.h"
diff --git a/arch/um/drivers/cow_sys.h b/arch/um/drivers/cow_sys.h
index ca8c9e1..f5701fd 100644
--- a/arch/um/drivers/cow_sys.h
+++ b/arch/um/drivers/cow_sys.h
@@ -8,7 +8,7 @@
static inline void *cow_malloc(int size)
{
- return kmalloc(size, UM_GFP_KERNEL);
+ return uml_kmalloc(size, UM_GFP_KERNEL);
}
static inline void cow_free(void *ptr)
diff --git a/arch/um/drivers/daemon_user.c b/arch/um/drivers/daemon_user.c
index f23c109..f8e85e0 100644
--- a/arch/um/drivers/daemon_user.c
+++ b/arch/um/drivers/daemon_user.c
@@ -34,7 +34,7 @@
{
struct sockaddr_un *sun;
- sun = kmalloc(sizeof(struct sockaddr_un), UM_GFP_KERNEL);
+ sun = uml_kmalloc(sizeof(struct sockaddr_un), UM_GFP_KERNEL);
if (sun == NULL) {
printk(UM_KERN_ERR "new_addr: allocation of sockaddr_un "
"failed\n");
@@ -83,7 +83,7 @@
goto out_close;
}
- sun = kmalloc(sizeof(struct sockaddr_un), UM_GFP_KERNEL);
+ sun = uml_kmalloc(sizeof(struct sockaddr_un), UM_GFP_KERNEL);
if (sun == NULL) {
printk(UM_KERN_ERR "new_addr: allocation of sockaddr_un "
"failed\n");
diff --git a/arch/um/drivers/fd.c b/arch/um/drivers/fd.c
index 0a2bb5b6..f5a981a 100644
--- a/arch/um/drivers/fd.c
+++ b/arch/um/drivers/fd.c
@@ -40,7 +40,7 @@
return NULL;
}
- data = kmalloc(sizeof(*data), UM_GFP_KERNEL);
+ data = uml_kmalloc(sizeof(*data), UM_GFP_KERNEL);
if (data == NULL)
return NULL;
diff --git a/arch/um/drivers/hostaudio_kern.c b/arch/um/drivers/hostaudio_kern.c
index ff1b22b..368219cc 100644
--- a/arch/um/drivers/hostaudio_kern.c
+++ b/arch/um/drivers/hostaudio_kern.c
@@ -154,7 +154,7 @@
case SNDCTL_DSP_SUBDIVIDE:
case SNDCTL_DSP_SETFRAGMENT:
if (get_user(data, (int __user *) arg))
- return EFAULT;
+ return -EFAULT;
break;
default:
break;
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 10b86e1..5047490 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -191,9 +191,9 @@
line_flush_buffer(tty);
}
-void line_put_char(struct tty_struct *tty, unsigned char ch)
+int line_put_char(struct tty_struct *tty, unsigned char ch)
{
- line_write(tty, &ch, sizeof(ch));
+ return line_write(tty, &ch, sizeof(ch));
}
int line_write(struct tty_struct *tty, const unsigned char *buf, int len)
diff --git a/arch/um/drivers/mcast_user.c b/arch/um/drivers/mcast_user.c
index 5f647d7..ee19e91 100644
--- a/arch/um/drivers/mcast_user.c
+++ b/arch/um/drivers/mcast_user.c
@@ -15,6 +15,7 @@
#include <unistd.h>
#include <errno.h>
#include <netinet/in.h>
+#include "kern_constants.h"
#include "mcast.h"
#include "net_user.h"
#include "um_malloc.h"
@@ -24,7 +25,7 @@
{
struct sockaddr_in *sin;
- sin = kmalloc(sizeof(struct sockaddr_in), UM_GFP_KERNEL);
+ sin = uml_kmalloc(sizeof(struct sockaddr_in), UM_GFP_KERNEL);
if (sin == NULL) {
printk(UM_KERN_ERR "new_addr: allocation of sockaddr_in "
"failed\n");
diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c
index abf2653..9415dd9 100644
--- a/arch/um/drivers/net_user.c
+++ b/arch/um/drivers/net_user.c
@@ -222,7 +222,7 @@
netmask[2], netmask[3]);
output_len = UM_KERN_PAGE_SIZE;
- output = kmalloc(output_len, UM_GFP_KERNEL);
+ output = uml_kmalloc(output_len, UM_GFP_KERNEL);
if (output == NULL)
printk(UM_KERN_ERR "change : failed to allocate output "
"buffer\n");
diff --git a/arch/um/drivers/port_user.c b/arch/um/drivers/port_user.c
index d269ca3..b49bf56 100644
--- a/arch/um/drivers/port_user.c
+++ b/arch/um/drivers/port_user.c
@@ -47,7 +47,7 @@
if (kern_data == NULL)
return NULL;
- data = kmalloc(sizeof(*data), UM_GFP_KERNEL);
+ data = uml_kmalloc(sizeof(*data), UM_GFP_KERNEL);
if (data == NULL)
goto err;
diff --git a/arch/um/drivers/pty.c b/arch/um/drivers/pty.c
index 49c79dd..1113911 100644
--- a/arch/um/drivers/pty.c
+++ b/arch/um/drivers/pty.c
@@ -29,7 +29,7 @@
{
struct pty_chan *data;
- data = kmalloc(sizeof(*data), UM_GFP_KERNEL);
+ data = uml_kmalloc(sizeof(*data), UM_GFP_KERNEL);
if (data == NULL)
return NULL;
diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c
index 71f0959..4949044 100644
--- a/arch/um/drivers/random.c
+++ b/arch/um/drivers/random.c
@@ -1,4 +1,5 @@
-/* Copyright (C) 2005 Jeff Dike <jdike@addtoit.com> */
+/* Copyright (C) 2005 - 2008 Jeff Dike <jdike@{linux.intel,addtoit}.com> */
+
/* Much of this ripped from drivers/char/hw_random.c, see there for other
* copyright.
*
@@ -8,16 +9,18 @@
#include <linux/sched.h>
#include <linux/module.h>
#include <linux/fs.h>
+#include <linux/interrupt.h>
#include <linux/miscdevice.h>
#include <linux/delay.h>
#include <asm/uaccess.h>
+#include "irq_kern.h"
#include "os.h"
/*
* core module and version information
*/
#define RNG_VERSION "1.0.0"
-#define RNG_MODULE_NAME "random"
+#define RNG_MODULE_NAME "hw_random"
#define RNG_MISCDEV_MINOR 183 /* official */
@@ -26,47 +29,67 @@
* protects against a module being loaded twice at the same time.
*/
static int random_fd = -1;
+static DECLARE_WAIT_QUEUE_HEAD(host_read_wait);
static int rng_dev_open (struct inode *inode, struct file *filp)
{
/* enforce read-only access to this chrdev */
if ((filp->f_mode & FMODE_READ) == 0)
return -EINVAL;
- if (filp->f_mode & FMODE_WRITE)
+ if ((filp->f_mode & FMODE_WRITE) != 0)
return -EINVAL;
return 0;
}
+static atomic_t host_sleep_count = ATOMIC_INIT(0);
+
static ssize_t rng_dev_read (struct file *filp, char __user *buf, size_t size,
- loff_t * offp)
+ loff_t *offp)
{
- u32 data;
- int n, ret = 0, have_data;
+ u32 data;
+ int n, ret = 0, have_data;
- while(size){
- n = os_read_file(random_fd, &data, sizeof(data));
- if(n > 0){
- have_data = n;
- while (have_data && size) {
- if (put_user((u8)data, buf++)) {
- ret = ret ? : -EFAULT;
- break;
- }
- size--;
- ret++;
- have_data--;
- data>>=8;
- }
- }
- else if(n == -EAGAIN){
- if (filp->f_flags & O_NONBLOCK)
- return ret ? : -EAGAIN;
+ while (size) {
+ n = os_read_file(random_fd, &data, sizeof(data));
+ if (n > 0) {
+ have_data = n;
+ while (have_data && size) {
+ if (put_user((u8) data, buf++)) {
+ ret = ret ? : -EFAULT;
+ break;
+ }
+ size--;
+ ret++;
+ have_data--;
+ data >>= 8;
+ }
+ }
+ else if (n == -EAGAIN) {
+ DECLARE_WAITQUEUE(wait, current);
- if(need_resched())
- schedule_timeout_interruptible(1);
- }
- else return n;
+ if (filp->f_flags & O_NONBLOCK)
+ return ret ? : -EAGAIN;
+
+ atomic_inc(&host_sleep_count);
+ reactivate_fd(random_fd, RANDOM_IRQ);
+ add_sigio_fd(random_fd);
+
+ add_wait_queue(&host_read_wait, &wait);
+ set_task_state(current, TASK_INTERRUPTIBLE);
+
+ schedule();
+ set_task_state(current, TASK_RUNNING);
+ remove_wait_queue(&host_read_wait, &wait);
+
+ if (atomic_dec_and_test(&host_sleep_count)) {
+ ignore_sigio_fd(random_fd);
+ deactivate_fd(random_fd, RANDOM_IRQ);
+ }
+ }
+ else
+ return n;
+
if (signal_pending (current))
return ret ? : -ERESTARTSYS;
}
@@ -86,6 +109,13 @@
&rng_chrdev_ops,
};
+static irqreturn_t random_interrupt(int irq, void *data)
+{
+ wake_up(&host_read_wait);
+
+ return IRQ_HANDLED;
+}
+
/*
* rng_init - initialize RNG module
*/
@@ -93,28 +123,33 @@
{
int err;
- err = os_open_file("/dev/random", of_read(OPENFLAGS()), 0);
- if(err < 0)
- goto out;
+ err = os_open_file("/dev/random", of_read(OPENFLAGS()), 0);
+ if (err < 0)
+ goto out;
- random_fd = err;
+ random_fd = err;
- err = os_set_fd_block(random_fd, 0);
- if(err)
+ err = um_request_irq(RANDOM_IRQ, random_fd, IRQ_READ, random_interrupt,
+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM, "random",
+ NULL);
+ if (err)
goto err_out_cleanup_hw;
+ sigio_broken(random_fd, 1);
+
err = misc_register (&rng_miscdev);
if (err) {
- printk (KERN_ERR RNG_MODULE_NAME ": misc device register failed\n");
+ printk (KERN_ERR RNG_MODULE_NAME ": misc device register "
+ "failed\n");
goto err_out_cleanup_hw;
}
+out:
+ return err;
- out:
- return err;
-
- err_out_cleanup_hw:
- random_fd = -1;
- goto out;
+err_out_cleanup_hw:
+ os_close_file(random_fd);
+ random_fd = -1;
+ goto out;
}
/*
@@ -122,6 +157,7 @@
*/
static void __exit rng_cleanup (void)
{
+ os_close_file(random_fd);
misc_deregister (&rng_miscdev);
}
diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c
index 8b80505..a1c2d2c 100644
--- a/arch/um/drivers/slip_user.c
+++ b/arch/um/drivers/slip_user.c
@@ -96,7 +96,7 @@
pid = err;
output_len = UM_KERN_PAGE_SIZE;
- output = kmalloc(output_len, UM_GFP_KERNEL);
+ output = uml_kmalloc(output_len, UM_GFP_KERNEL);
if (output == NULL) {
printk(UM_KERN_ERR "slip_tramp : failed to allocate output "
"buffer\n");
diff --git a/arch/um/drivers/tty.c b/arch/um/drivers/tty.c
index c930fed..495858a 100644
--- a/arch/um/drivers/tty.c
+++ b/arch/um/drivers/tty.c
@@ -29,7 +29,7 @@
}
str++;
- data = kmalloc(sizeof(*data), UM_GFP_KERNEL);
+ data = uml_kmalloc(sizeof(*data), UM_GFP_KERNEL);
if (data == NULL)
return NULL;
*data = ((struct tty_chan) { .dev = str,
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 5e45e39..44ad160 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -1178,8 +1178,8 @@
* by one word. Thanks to Lynn Kerby for the fix and James McMechan
* for the original diagnosis.
*/
- if(*cow_offset == ((bitmap_len + sizeof(unsigned long) - 1) /
- sizeof(unsigned long) - 1))
+ if (*cow_offset == (DIV_ROUND_UP(bitmap_len,
+ sizeof(unsigned long)) - 1))
(*cow_offset)--;
bitmap_words[0] = bitmap[*cow_offset];
diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c
index 8a1c18a..da2caa5 100644
--- a/arch/um/drivers/xterm.c
+++ b/arch/um/drivers/xterm.c
@@ -30,7 +30,7 @@
{
struct xterm_chan *data;
- data = kmalloc(sizeof(*data), UM_GFP_KERNEL);
+ data = uml_kmalloc(sizeof(*data), UM_GFP_KERNEL);
if (data == NULL)
return NULL;
*data = ((struct xterm_chan) { .pid = -1,
diff --git a/arch/um/include/as-layout.h b/arch/um/include/as-layout.h
index cac542d..58e852d 100644
--- a/arch/um/include/as-layout.h
+++ b/arch/um/include/as-layout.h
@@ -23,16 +23,16 @@
*/
#ifdef __ASSEMBLY__
-#define _AC(X, Y) (Y)
+#define _UML_AC(X, Y) (Y)
#else
-#define __AC(X, Y) (X (Y))
-#define _AC(X, Y) __AC(X, Y)
+#define __UML_AC(X, Y) (X(Y))
+#define _UML_AC(X, Y) __UML_AC(X, Y)
#endif
-#define STUB_START _AC(, 0x100000)
-#define STUB_CODE _AC((unsigned long), STUB_START)
-#define STUB_DATA _AC((unsigned long), STUB_CODE + UM_KERN_PAGE_SIZE)
-#define STUB_END _AC((unsigned long), STUB_DATA + UM_KERN_PAGE_SIZE)
+#define STUB_START _UML_AC(, 0x100000)
+#define STUB_CODE _UML_AC((unsigned long), STUB_START)
+#define STUB_DATA _UML_AC((unsigned long), STUB_CODE + UM_KERN_PAGE_SIZE)
+#define STUB_END _UML_AC((unsigned long), STUB_DATA + UM_KERN_PAGE_SIZE)
#ifndef __ASSEMBLY__
diff --git a/arch/um/include/line.h b/arch/um/include/line.h
index 1223f2c..311a0d3 100644
--- a/arch/um/include/line.h
+++ b/arch/um/include/line.h
@@ -58,11 +58,11 @@
};
#define LINE_INIT(str, d) \
- { .count_lock = SPIN_LOCK_UNLOCKED, \
+ { .count_lock = __SPIN_LOCK_UNLOCKED((str).count_lock), \
.init_str = str, \
.init_pri = INIT_STATIC, \
.valid = 1, \
- .lock = SPIN_LOCK_UNLOCKED, \
+ .lock = __SPIN_LOCK_UNLOCKED((str).lock), \
.driver = d }
extern void line_close(struct tty_struct *tty, struct file * filp);
@@ -71,7 +71,7 @@
char *init, char **error_out);
extern int line_write(struct tty_struct *tty, const unsigned char *buf,
int len);
-extern void line_put_char(struct tty_struct *tty, unsigned char ch);
+extern int line_put_char(struct tty_struct *tty, unsigned char ch);
extern void line_set_termios(struct tty_struct *tty, struct ktermios * old);
extern int line_chars_in_buffer(struct tty_struct *tty);
extern void line_flush_buffer(struct tty_struct *tty);
diff --git a/arch/um/include/os.h b/arch/um/include/os.h
index 32c799e3..e2716ac 100644
--- a/arch/um/include/os.h
+++ b/arch/um/include/os.h
@@ -290,6 +290,7 @@
extern int add_sigio_fd(int fd);
extern int ignore_sigio_fd(int fd);
extern void maybe_sigio_broken(int fd, int read);
+extern void sigio_broken(int fd, int read);
/* sys-x86_64/prctl.c */
extern int os_arch_prctl(int pid, int code, unsigned long *addr);
diff --git a/arch/um/include/process.h b/arch/um/include/process.h
index 5af9157..bb873a5 100644
--- a/arch/um/include/process.h
+++ b/arch/um/include/process.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2008 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
@@ -8,18 +8,10 @@
#include <signal.h>
-extern void sig_handler(int sig, struct sigcontext sc);
-extern void alarm_handler(int sig, struct sigcontext sc);
+/* Copied from linux/compiler-gcc.h since we can't include it directly */
+#define barrier() __asm__ __volatile__("": : :"memory")
+
+extern void sig_handler(int sig, struct sigcontext *sc);
+extern void alarm_handler(int sig, struct sigcontext *sc);
#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/include/skas_ptrace.h b/arch/um/include/skas_ptrace.h
index cd2327d..3d31bba 100644
--- a/arch/um/include/skas_ptrace.h
+++ b/arch/um/include/skas_ptrace.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
@@ -12,14 +12,3 @@
#include "sysdep/skas_ptrace.h"
#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/include/sysdep-i386/ptrace_user.h b/arch/um/include/sysdep-i386/ptrace_user.h
index 7565072..ef56247 100644
--- a/arch/um/include/sysdep-i386/ptrace_user.h
+++ b/arch/um/include/sysdep-i386/ptrace_user.h
@@ -41,38 +41,10 @@
#define PT_SP_OFFSET PT_OFFSET(UESP)
#define PT_SP(regs) ((regs)[UESP])
-#define FP_SIZE ((HOST_XFP_SIZE > HOST_FP_SIZE) ? HOST_XFP_SIZE : HOST_FP_SIZE)
+#define FP_SIZE ((HOST_FPX_SIZE > HOST_FP_SIZE) ? HOST_FPX_SIZE : HOST_FP_SIZE)
#ifndef FRAME_SIZE
#define FRAME_SIZE (17)
#endif
-#define FRAME_SIZE_OFFSET (FRAME_SIZE * sizeof(unsigned long))
-
-#define FP_FRAME_SIZE (27)
-#define FPX_FRAME_SIZE (128)
-
-#ifdef PTRACE_GETREGS
-#define UM_HAVE_GETREGS
-#endif
-
-#ifdef PTRACE_SETREGS
-#define UM_HAVE_SETREGS
-#endif
-
-#ifdef PTRACE_GETFPREGS
-#define UM_HAVE_GETFPREGS
-#endif
-
-#ifdef PTRACE_SETFPREGS
-#define UM_HAVE_SETFPREGS
-#endif
-
-#ifdef PTRACE_GETFPXREGS
-#define UM_HAVE_GETFPXREGS
-#endif
-
-#ifdef PTRACE_SETFPXREGS
-#define UM_HAVE_SETFPXREGS
-#endif
#endif
diff --git a/arch/um/include/sysdep-i386/sigcontext.h b/arch/um/include/sysdep-i386/sigcontext.h
index 67e7712..f583c87 100644
--- a/arch/um/include/sysdep-i386/sigcontext.h
+++ b/arch/um/include/sysdep-i386/sigcontext.h
@@ -10,7 +10,7 @@
#define IP_RESTART_SYSCALL(ip) ((ip) -= 2)
-#define GET_FAULTINFO_FROM_SC(fi,sc) \
+#define GET_FAULTINFO_FROM_SC(fi, sc) \
{ \
(fi).cr2 = SC_CR2(sc); \
(fi).error_code = SC_ERR(sc); \
diff --git a/arch/um/include/sysdep-x86_64/ptrace_user.h b/arch/um/include/sysdep-x86_64/ptrace_user.h
index 45c0bd8..4dbccdb 100644
--- a/arch/um/include/sysdep-x86_64/ptrace_user.h
+++ b/arch/um/include/sysdep-x86_64/ptrace_user.h
@@ -48,7 +48,8 @@
#define PT_ORIG_RAX_OFFSET (ORIG_RAX)
#define PT_ORIG_RAX(regs) ((regs)[PT_INDEX(ORIG_RAX)])
-/* x86_64 FC3 doesn't define this in /usr/include/linux/ptrace.h even though
+/*
+ * x86_64 FC3 doesn't define this in /usr/include/linux/ptrace.h even though
* it's defined in the kernel's include/linux/ptrace.h. Additionally, use the
* 2.4 name and value for 2.4 host compatibility.
*/
@@ -56,7 +57,8 @@
#define PTRACE_OLDSETOPTIONS 21
#endif
-/* These are before the system call, so the system call number is RAX
+/*
+ * These are before the system call, so the system call number is RAX
* rather than ORIG_RAX, and arg4 is R10 rather than RCX
*/
#define REGS_SYSCALL_NR PT_INDEX(RAX)
@@ -73,14 +75,3 @@
#define FP_SIZE (HOST_FP_SIZE)
#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/include/um_malloc.h b/arch/um/include/um_malloc.h
index 0ad17cb..c554d70 100644
--- a/arch/um/include/um_malloc.h
+++ b/arch/um/include/um_malloc.h
@@ -8,15 +8,12 @@
#include "kern_constants.h"
-extern void *__kmalloc(int size, int flags);
-static inline void *kmalloc(int size, int flags)
-{
- return __kmalloc(size, flags);
-}
-
+extern void *uml_kmalloc(int size, int flags);
extern void kfree(const void *ptr);
extern void *vmalloc(unsigned long size);
extern void vfree(void *ptr);
#endif /* __UM_MALLOC_H__ */
+
+
diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S
index 26090b7..9975e1a 100644
--- a/arch/um/kernel/dyn.lds.S
+++ b/arch/um/kernel/dyn.lds.S
@@ -1,4 +1,5 @@
#include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
OUTPUT_FORMAT(ELF_FORMAT)
OUTPUT_ARCH(ELF_ARCH)
@@ -21,7 +22,7 @@
_einittext = .;
}
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
/* Read-only sections, merged into text segment: */
.hash : { *(.hash) }
@@ -68,9 +69,9 @@
/* .gnu.warning sections are handled specially by elf32.em. */
*(.gnu.warning)
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
} =0x90909090
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
.syscall_stub : {
__syscall_stub_start = .;
*(.__syscall_stub*)
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index 2eea1ff..b0ee646 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -375,3 +375,8 @@
return pmd;
}
#endif
+
+void *uml_kmalloc(int size, int flags)
+{
+ return kmalloc(size, flags);
+}
diff --git a/arch/um/kernel/syscall.c b/arch/um/kernel/syscall.c
index 9cffc62..128ee85 100644
--- a/arch/um/kernel/syscall.c
+++ b/arch/um/kernel/syscall.c
@@ -73,23 +73,6 @@
out:
return err;
}
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-long sys_pipe(unsigned long __user * fildes)
-{
- int fd[2];
- long error;
-
- error = do_pipe(fd);
- if (!error) {
- if (copy_to_user(fildes, fd, sizeof(fd)))
- error = -EFAULT;
- }
- return error;
-}
-
long sys_uname(struct old_utsname __user * name)
{
diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index 0d0cea2..c3e2f36 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -75,7 +75,7 @@
static cycle_t itimer_read(void)
{
- return os_nsecs();
+ return os_nsecs() / 1000;
}
static struct clocksource itimer_clocksource = {
@@ -83,7 +83,7 @@
.rating = 300,
.read = itimer_read,
.mask = CLOCKSOURCE_MASK(64),
- .mult = 1,
+ .mult = 1000,
.shift = 0,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c
index 56deed6..9db85b2 100644
--- a/arch/um/kernel/um_arch.c
+++ b/arch/um/kernel/um_arch.c
@@ -150,7 +150,7 @@
static int __init no_skas_debug_setup(char *line, int *add)
{
printf("'debug' is not necessary to gdb UML in skas mode - run \n");
- printf("'gdb linux'");
+ printf("'gdb linux'\n");
return 0;
}
@@ -258,6 +258,7 @@
{
unsigned long avail, diff;
unsigned long virtmem_size, max_physmem;
+ unsigned long stack;
unsigned int i;
int add;
char * mode;
@@ -348,7 +349,9 @@
}
virtmem_size = physmem_size;
- avail = TASK_SIZE - start_vm;
+ stack = (unsigned long) argv;
+ stack &= ~(1024 * 1024 - 1);
+ avail = stack - start_vm;
if (physmem_size > avail)
virtmem_size = avail;
end_vm = start_vm + virtmem_size;
diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S
index 5828c1d..11b8352 100644
--- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S
@@ -1,4 +1,5 @@
#include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
OUTPUT_FORMAT(ELF_FORMAT)
OUTPUT_ARCH(ELF_ARCH)
@@ -26,7 +27,7 @@
INIT_TEXT
_einittext = .;
}
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
.text :
{
@@ -39,7 +40,7 @@
*(.gnu.linkonce.t*)
}
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
.syscall_stub : {
__syscall_stub_start = .;
*(.__syscall_stub*)
@@ -79,7 +80,7 @@
.sdata : { *(.sdata) }
_edata = .;
PROVIDE (edata = .);
- . = ALIGN(0x1000);
+ . = ALIGN(PAGE_SIZE);
.sbss :
{
__bss_start = .;
diff --git a/arch/um/os-Linux/drivers/ethertap_user.c b/arch/um/os-Linux/drivers/ethertap_user.c
index 6fb0b17..cc72cb2 100644
--- a/arch/um/os-Linux/drivers/ethertap_user.c
+++ b/arch/um/os-Linux/drivers/ethertap_user.c
@@ -52,7 +52,7 @@
return;
}
- output = kmalloc(UM_KERN_PAGE_SIZE, UM_GFP_KERNEL);
+ output = uml_kmalloc(UM_KERN_PAGE_SIZE, UM_GFP_KERNEL);
if (output == NULL)
printk(UM_KERN_ERR "etap_change : Failed to allocate output "
"buffer\n");
@@ -165,7 +165,7 @@
err = etap_tramp(pri->dev_name, pri->gate_addr, control_fds[0],
control_fds[1], data_fds[0], data_fds[1]);
output_len = UM_KERN_PAGE_SIZE;
- output = kmalloc(output_len, UM_GFP_KERNEL);
+ output = uml_kmalloc(output_len, UM_GFP_KERNEL);
read_output(control_fds[0], output, output_len);
if (output == NULL)
diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c
index f25c29a..74ca7aa 100644
--- a/arch/um/os-Linux/helper.c
+++ b/arch/um/os-Linux/helper.c
@@ -71,8 +71,8 @@
data.pre_data = pre_data;
data.argv = argv;
data.fd = fds[1];
- data.buf = __cant_sleep() ? kmalloc(PATH_MAX, UM_GFP_ATOMIC) :
- kmalloc(PATH_MAX, UM_GFP_KERNEL);
+ data.buf = __cant_sleep() ? uml_kmalloc(PATH_MAX, UM_GFP_ATOMIC) :
+ uml_kmalloc(PATH_MAX, UM_GFP_KERNEL);
pid = clone(helper_child, (void *) sp, CLONE_VM, &data);
if (pid < 0) {
ret = -errno;
diff --git a/arch/um/os-Linux/main.c b/arch/um/os-Linux/main.c
index abb9b0ff..eee69b9 100644
--- a/arch/um/os-Linux/main.c
+++ b/arch/um/os-Linux/main.c
@@ -199,7 +199,7 @@
return __real_malloc(size);
else if (size <= UM_KERN_PAGE_SIZE)
/* finding contiguous pages can be hard*/
- ret = kmalloc(size, UM_GFP_KERNEL);
+ ret = uml_kmalloc(size, UM_GFP_KERNEL);
else ret = vmalloc(size);
/*
diff --git a/arch/um/os-Linux/sigio.c b/arch/um/os-Linux/sigio.c
index abf47a7c..eb8f2e4 100644
--- a/arch/um/os-Linux/sigio.c
+++ b/arch/um/os-Linux/sigio.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Copyright (C) 2002 - 2008 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
@@ -15,6 +15,7 @@
#include "kern_util.h"
#include "init.h"
#include "os.h"
+#include "process.h"
#include "sigio.h"
#include "um_malloc.h"
#include "user.h"
@@ -109,7 +110,7 @@
if (n <= polls->size)
return 0;
- new = kmalloc(n * sizeof(struct pollfd), UM_GFP_ATOMIC);
+ new = uml_kmalloc(n * sizeof(struct pollfd), UM_GFP_ATOMIC);
if (new == NULL) {
printk(UM_KERN_ERR "need_poll : failed to allocate new "
"pollfds\n");
@@ -243,7 +244,7 @@
{
struct pollfd *p;
- p = kmalloc(sizeof(struct pollfd), UM_GFP_KERNEL);
+ p = uml_kmalloc(sizeof(struct pollfd), UM_GFP_KERNEL);
if (p == NULL) {
printk(UM_KERN_ERR "setup_initial_poll : failed to allocate "
"poll\n");
@@ -338,20 +339,10 @@
close(l_write_sigio_fds[1]);
}
-/* Changed during early boot */
-static int pty_output_sigio = 0;
-static int pty_close_sigio = 0;
-
-void maybe_sigio_broken(int fd, int read)
+void sigio_broken(int fd, int read)
{
int err;
- if (!isatty(fd))
- return;
-
- if ((read || pty_output_sigio) && (!read || pty_close_sigio))
- return;
-
write_sigio_workaround();
sigio_lock();
@@ -370,6 +361,21 @@
sigio_unlock();
}
+/* Changed during early boot */
+static int pty_output_sigio;
+static int pty_close_sigio;
+
+void maybe_sigio_broken(int fd, int read)
+{
+ if (!isatty(fd))
+ return;
+
+ if ((read || pty_output_sigio) && (!read || pty_close_sigio))
+ return;
+
+ sigio_broken(fd, read);
+}
+
static void sigio_cleanup(void)
{
if (write_sigio_pid == -1)
@@ -383,7 +389,7 @@
__uml_exitcall(sigio_cleanup);
/* Used as a flag during SIGIO testing early in boot */
-static volatile int got_sigio = 0;
+static int got_sigio;
static void __init handler(int sig)
{
@@ -498,7 +504,8 @@
if (errno != EAGAIN)
printk(UM_KERN_ERR "tty_output : write failed, errno = %d\n",
errno);
- while (((n = read(slave, buf, sizeof(buf))) > 0) && !got_sigio)
+ while (((n = read(slave, buf, sizeof(buf))) > 0) &&
+ !({ barrier(); got_sigio; }))
;
if (got_sigio) {
diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c
index 3f1694b..5aade60 100644
--- a/arch/um/os-Linux/signal.c
+++ b/arch/um/os-Linux/signal.c
@@ -12,6 +12,7 @@
#include "as-layout.h"
#include "kern_util.h"
#include "os.h"
+#include "process.h"
#include "sysdep/barrier.h"
#include "sysdep/sigcontext.h"
#include "user.h"
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index 1e8cba6..6be028c 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -442,7 +442,7 @@
unblock_signals();
break;
default:
- printk(UM_KERN_ERR "userspace - child stopped "
+ printk(UM_KERN_ERR "userspace - child stopped "
"with signal %d\n", sig);
fatal_sigsegv();
}
diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
index 997d019..b4b36e0 100644
--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -23,6 +23,7 @@
#include "mem_user.h"
#include "ptrace_user.h"
#include "registers.h"
+#include "skas.h"
#include "skas_ptrace.h"
static void ptrace_child(void)
@@ -140,14 +141,27 @@
}
/* Changed only during early boot */
-int ptrace_faultinfo = 1;
-int ptrace_ldt = 1;
-int proc_mm = 1;
-int skas_needs_stub = 0;
+int ptrace_faultinfo;
+static int disable_ptrace_faultinfo;
+
+int ptrace_ldt;
+static int disable_ptrace_ldt;
+
+int proc_mm;
+static int disable_proc_mm;
+
+int have_switch_mm;
+static int disable_switch_mm;
+
+int skas_needs_stub;
static int __init skas0_cmd_param(char *str, int* add)
{
- ptrace_faultinfo = proc_mm = 0;
+ disable_ptrace_faultinfo = 1;
+ disable_ptrace_ldt = 1;
+ disable_proc_mm = 1;
+ disable_switch_mm = 1;
+
return 0;
}
@@ -157,15 +171,12 @@
__attribute__((alias("skas0_cmd_param")));
__uml_setup("skas0", skas0_cmd_param,
- "skas0\n"
- " Disables SKAS3 usage, so that SKAS0 is used, unless \n"
- " you specify mode=tt.\n\n");
+"skas0\n"
+" Disables SKAS3 and SKAS4 usage, so that SKAS0 is used\n\n");
__uml_setup("mode=skas0", mode_skas0_cmd_param,
- "mode=skas0\n"
- " Disables SKAS3 usage, so that SKAS0 is used, unless you \n"
- " specify mode=tt. Note that this was recently added - on \n"
- " older kernels you must use simply \"skas0\".\n\n");
+"mode=skas0\n"
+" Disables SKAS3 and SKAS4 usage, so that SKAS0 is used.\n\n");
/* Changed only during early boot */
static int force_sysemu_disabled = 0;
@@ -360,7 +371,7 @@
static int __init noprocmm_cmd_param(char *str, int* add)
{
- proc_mm = 0;
+ disable_proc_mm = 1;
return 0;
}
@@ -372,7 +383,7 @@
static int __init noptracefaultinfo_cmd_param(char *str, int* add)
{
- ptrace_faultinfo = 0;
+ disable_ptrace_faultinfo = 1;
return 0;
}
@@ -384,7 +395,7 @@
static int __init noptraceldt_cmd_param(char *str, int* add)
{
- ptrace_ldt = 0;
+ disable_ptrace_ldt = 1;
return 0;
}
@@ -404,17 +415,15 @@
n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi);
if (n < 0) {
- ptrace_faultinfo = 0;
if (errno == EIO)
non_fatal("not found\n");
else
perror("not found");
- }
+ } else if (disable_ptrace_faultinfo)
+ non_fatal("found but disabled on command line\n");
else {
- if (!ptrace_faultinfo)
- non_fatal("found but disabled on command line\n");
- else
- non_fatal("found\n");
+ ptrace_faultinfo = 1;
+ non_fatal("found\n");
}
stop_ptraced_child(pid, 1, 1);
@@ -437,38 +446,30 @@
if (n < 0) {
if (errno == EIO)
non_fatal("not found\n");
- else {
- perror("not found");
- }
- ptrace_ldt = 0;
- }
- else {
- if (ptrace_ldt)
- non_fatal("found\n");
else
- non_fatal("found, but use is disabled\n");
+ perror("not found");
+ } else if (disable_ptrace_ldt)
+ non_fatal("found, but use is disabled\n");
+ else {
+ ptrace_ldt = 1;
+ non_fatal("found\n");
}
stop_ptraced_child(pid, 1, 1);
-#else
- /* PTRACE_LDT might be disabled via cmdline option.
- * We want to override this, else we might use the stub
- * without real need
- */
- ptrace_ldt = 1;
#endif
}
static inline void check_skas3_proc_mm(void)
{
non_fatal(" - /proc/mm...");
- if (access("/proc/mm", W_OK) < 0) {
- proc_mm = 0;
+ if (access("/proc/mm", W_OK) < 0)
perror("not found");
- }
- else if (!proc_mm)
+ else if (disable_proc_mm)
non_fatal("found but disabled on command line\n");
- else non_fatal("found\n");
+ else {
+ proc_mm = 1;
+ non_fatal("found\n");
+ }
}
void can_do_skas(void)
diff --git a/arch/um/os-Linux/sys-i386/registers.c b/arch/um/os-Linux/sys-i386/registers.c
index b613473..c6183e7 100644
--- a/arch/um/os-Linux/sys-i386/registers.c
+++ b/arch/um/os-Linux/sys-i386/registers.c
@@ -5,6 +5,7 @@
*/
#include <errno.h>
+#include <asm/user.h>
#include "kern_constants.h"
#include "longjmp.h"
#include "user.h"
@@ -74,10 +75,10 @@
void arch_init_registers(int pid)
{
- unsigned long fpx_regs[HOST_XFP_SIZE];
+ struct user_fxsr_struct fpx_regs;
int err;
- err = ptrace(PTRACE_GETFPXREGS, pid, 0, fpx_regs);
+ err = ptrace(PTRACE_GETFPXREGS, pid, 0, &fpx_regs);
if (!err)
return;
diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c
index e492805..bee98f4 100644
--- a/arch/um/os-Linux/time.c
+++ b/arch/um/os-Linux/time.c
@@ -9,7 +9,9 @@
#include <time.h>
#include <sys/time.h>
#include "kern_constants.h"
+#include "kern_util.h"
#include "os.h"
+#include "process.h"
#include "user.h"
int set_interval(void)
@@ -58,12 +60,17 @@
long long disable_timer(void)
{
struct itimerval time = ((struct itimerval) { { 0, 0 }, { 0, 0 } });
+ int remain, max = UM_NSEC_PER_SEC / UM_HZ;
if (setitimer(ITIMER_VIRTUAL, &time, &time) < 0)
printk(UM_KERN_ERR "disable_timer - setitimer failed, "
"errno = %d\n", errno);
- return timeval_to_ns(&time.it_value);
+ remain = timeval_to_ns(&time.it_value);
+ if (remain > max)
+ remain = max;
+
+ return remain;
}
long long os_nsecs(void)
@@ -79,7 +86,44 @@
{
return 0;
}
+
+static void deliver_alarm(void)
+{
+ alarm_handler(SIGVTALRM, NULL);
+}
+
+static unsigned long long sleep_time(unsigned long long nsecs)
+{
+ return nsecs;
+}
+
#else
+unsigned long long last_tick;
+unsigned long long skew;
+
+static void deliver_alarm(void)
+{
+ unsigned long long this_tick = os_nsecs();
+ int one_tick = UM_NSEC_PER_SEC / UM_HZ;
+
+ if (last_tick == 0)
+ last_tick = this_tick - one_tick;
+
+ skew += this_tick - last_tick;
+
+ while (skew >= one_tick) {
+ alarm_handler(SIGVTALRM, NULL);
+ skew -= one_tick;
+ }
+
+ last_tick = this_tick;
+}
+
+static unsigned long long sleep_time(unsigned long long nsecs)
+{
+ return nsecs > skew ? nsecs - skew : 0;
+}
+
static inline long long timespec_to_us(const struct timespec *ts)
{
return ((long long) ts->tv_sec * UM_USEC_PER_SEC) +
@@ -102,6 +146,8 @@
*/
if (start_usecs > usec)
start_usecs = usec;
+
+ start_usecs -= skew / UM_NSEC_PER_USEC;
tv = ((struct timeval) { .tv_sec = start_usecs / UM_USEC_PER_SEC,
.tv_usec = start_usecs % UM_USEC_PER_SEC });
interval = ((struct itimerval) { { 0, usec }, tv });
@@ -113,8 +159,6 @@
}
#endif
-extern void alarm_handler(int sig, struct sigcontext *sc);
-
void idle_sleep(unsigned long long nsecs)
{
struct timespec ts;
@@ -126,10 +170,12 @@
*/
if (nsecs == 0)
nsecs = UM_NSEC_PER_SEC / UM_HZ;
+
+ nsecs = sleep_time(nsecs);
ts = ((struct timespec) { .tv_sec = nsecs / UM_NSEC_PER_SEC,
.tv_nsec = nsecs % UM_NSEC_PER_SEC });
if (nanosleep(&ts, &ts) == 0)
- alarm_handler(SIGVTALRM, NULL);
+ deliver_alarm();
after_sleep_interval(&ts);
}
diff --git a/arch/um/sys-i386/ptrace.c b/arch/um/sys-i386/ptrace.c
index 6b44999..c9b1765 100644
--- a/arch/um/sys-i386/ptrace.c
+++ b/arch/um/sys-i386/ptrace.c
@@ -148,14 +148,13 @@
int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
{
int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
- long fpregs[HOST_FP_SIZE];
+ struct user_i387_struct fpregs;
- BUG_ON(sizeof(*buf) != sizeof(fpregs));
- err = save_fp_registers(userspace_pid[cpu], fpregs);
+ err = save_fp_registers(userspace_pid[cpu], (unsigned long *) &fpregs);
if (err)
return err;
- n = copy_to_user(buf, fpregs, sizeof(fpregs));
+ n = copy_to_user(buf, &fpregs, sizeof(fpregs));
if(n > 0)
return -EFAULT;
@@ -165,27 +164,26 @@
int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
{
int n, cpu = ((struct thread_info *) child->stack)->cpu;
- long fpregs[HOST_FP_SIZE];
+ struct user_i387_struct fpregs;
- BUG_ON(sizeof(*buf) != sizeof(fpregs));
- n = copy_from_user(fpregs, buf, sizeof(fpregs));
+ n = copy_from_user(&fpregs, buf, sizeof(fpregs));
if (n > 0)
return -EFAULT;
- return restore_fp_registers(userspace_pid[cpu], fpregs);
+ return restore_fp_registers(userspace_pid[cpu],
+ (unsigned long *) &fpregs);
}
int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
{
int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
- long fpregs[HOST_XFP_SIZE];
+ struct user_fxsr_struct fpregs;
- BUG_ON(sizeof(*buf) != sizeof(fpregs));
- err = save_fpx_registers(userspace_pid[cpu], fpregs);
+ err = save_fpx_registers(userspace_pid[cpu], (unsigned long *) &fpregs);
if (err)
return err;
- n = copy_to_user(buf, fpregs, sizeof(fpregs));
+ n = copy_to_user(buf, &fpregs, sizeof(fpregs));
if(n > 0)
return -EFAULT;
@@ -195,14 +193,14 @@
int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
{
int n, cpu = ((struct thread_info *) child->stack)->cpu;
- long fpregs[HOST_XFP_SIZE];
+ struct user_fxsr_struct fpregs;
- BUG_ON(sizeof(*buf) != sizeof(fpregs));
- n = copy_from_user(fpregs, buf, sizeof(fpregs));
+ n = copy_from_user(&fpregs, buf, sizeof(fpregs));
if (n > 0)
return -EFAULT;
- return restore_fpx_registers(userspace_pid[cpu], fpregs);
+ return restore_fpx_registers(userspace_pid[cpu],
+ (unsigned long *) &fpregs);
}
long subarch_ptrace(struct task_struct *child, long request, long addr,
diff --git a/arch/um/sys-i386/user-offsets.c b/arch/um/sys-i386/user-offsets.c
index 39bd32b..5f883bf 100644
--- a/arch/um/sys-i386/user-offsets.c
+++ b/arch/um/sys-i386/user-offsets.c
@@ -22,7 +22,7 @@
OFFSET(HOST_SC_CR2, sigcontext, cr2);
DEFINE_LONGS(HOST_FP_SIZE, sizeof(struct user_fpregs_struct));
- DEFINE_LONGS(HOST_XFP_SIZE, sizeof(struct user_fpxregs_struct));
+ DEFINE_LONGS(HOST_FPX_SIZE, sizeof(struct user_fpxregs_struct));
DEFINE(HOST_IP, EIP);
DEFINE(HOST_SP, UESP);
diff --git a/arch/um/sys-x86_64/user-offsets.c b/arch/um/sys-x86_64/user-offsets.c
index 2f3443c..9735854 100644
--- a/arch/um/sys-x86_64/user-offsets.c
+++ b/arch/um/sys-x86_64/user-offsets.c
@@ -24,7 +24,6 @@
OFFSET(HOST_SC_TRAPNO, sigcontext, trapno);
DEFINE(HOST_FP_SIZE, sizeof(struct _fpstate) / sizeof(unsigned long));
- DEFINE(HOST_XFP_SIZE, 0);
DEFINE_LONGS(HOST_RBX, RBX);
DEFINE_LONGS(HOST_RCX, RCX);
DEFINE_LONGS(HOST_RDI, RDI);
diff --git a/arch/v850/kernel/syscalls.c b/arch/v850/kernel/syscalls.c
index 003db9c..1a83daf 100644
--- a/arch/v850/kernel/syscalls.c
+++ b/arch/v850/kernel/syscalls.c
@@ -132,23 +132,6 @@
return ret;
}
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-int sys_pipe (int *fildes)
-{
- int fd[2];
- int error;
-
- error = do_pipe (fd);
- if (!error) {
- if (copy_to_user (fildes, fd, 2*sizeof (int)))
- error = -EFAULT;
- }
- return error;
-}
-
static inline unsigned long
do_mmap2 (unsigned long addr, size_t len,
unsigned long prot, unsigned long flags,
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index c3f8809..fe361ae 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -18,6 +18,7 @@
### Arch settings
config X86
def_bool y
+ select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_KPROBES
@@ -334,6 +335,7 @@
select GENERIC_GPIO
select LEDS_CLASS
select LEDS_GPIO
+ select NEW_LEDS
help
This option is needed for RDC R-321x system-on-chip, also known
as R-8610-(G).
diff --git a/arch/x86/boot/compressed/relocs.c b/arch/x86/boot/compressed/relocs.c
index d01ea42..edaadea 100644
--- a/arch/x86/boot/compressed/relocs.c
+++ b/arch/x86/boot/compressed/relocs.c
@@ -191,7 +191,7 @@
die("Cannot read ELF header: %s\n",
strerror(errno));
}
- if (memcmp(ehdr.e_ident, ELFMAG, 4) != 0) {
+ if (memcmp(ehdr.e_ident, ELFMAG, SELFMAG) != 0) {
die("No ELF magic\n");
}
if (ehdr.e_ident[EI_CLASS] != ELFCLASS32) {
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index bbdacb3..5e618c3 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -83,9 +83,7 @@
obj-$(CONFIG_KVM_CLOCK) += kvmclock.o
obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o
-ifdef CONFIG_INPUT_PCSPKR
-obj-y += pcspeaker.o
-endif
+obj-$(CONFIG_PCSPKR_PLATFORM) += pcspeaker.o
obj-$(CONFIG_SCx200) += scx200.o
scx200-y += scx200_32.o
diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile
index 7335959..fd5ca97 100644
--- a/arch/x86/kernel/acpi/Makefile
+++ b/arch/x86/kernel/acpi/Makefile
@@ -10,5 +10,5 @@
$(obj)/wakeup_rm.o: $(obj)/realmode/wakeup.bin
$(obj)/realmode/wakeup.bin: FORCE
- $(Q)$(MAKE) $(build)=$(obj)/realmode $@
+ $(Q)$(MAKE) $(build)=$(obj)/realmode
diff --git a/arch/x86/kernel/acpi/realmode/Makefile b/arch/x86/kernel/acpi/realmode/Makefile
index 0929008..1c31cc0 100644
--- a/arch/x86/kernel/acpi/realmode/Makefile
+++ b/arch/x86/kernel/acpi/realmode/Makefile
@@ -6,7 +6,8 @@
# for more details.
#
-targets := wakeup.bin wakeup.elf
+always := wakeup.bin
+targets := wakeup.elf wakeup.lds
wakeup-y += wakeup.o wakemain.o video-mode.o copy.o
@@ -48,7 +49,7 @@
CPPFLAGS_wakeup.lds += -P -C
-$(obj)/wakeup.elf: $(src)/wakeup.lds $(WAKEUP_OBJS) FORCE
+$(obj)/wakeup.elf: $(obj)/wakeup.lds $(WAKEUP_OBJS) FORCE
$(call if_changed,ld)
OBJCOPYFLAGS_wakeup.bin := -O binary
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S
index 22fab6c..7da00b7 100644
--- a/arch/x86/kernel/acpi/realmode/wakeup.lds.S
+++ b/arch/x86/kernel/acpi/realmode/wakeup.lds.S
@@ -12,11 +12,6 @@
SECTIONS
{
- . = HEADER_OFFSET;
- .header : {
- *(.header)
- }
-
. = 0;
.text : {
*(.text*)
@@ -50,6 +45,11 @@
__bss_end = .;
}
+ . = HEADER_OFFSET;
+ .header : {
+ *(.header)
+ }
+
. = ALIGN(16);
_end = .;
diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c
index 238468a..c2e1ce3 100644
--- a/arch/x86/kernel/cpu/addon_cpuid_features.c
+++ b/arch/x86/kernel/cpu/addon_cpuid_features.c
@@ -6,6 +6,7 @@
#include <linux/cpu.h>
+#include <asm/pat.h>
#include <asm/processor.h>
struct cpuid_bit {
@@ -48,3 +49,23 @@
set_cpu_cap(c, cb->feature);
}
}
+
+#ifdef CONFIG_X86_PAT
+void __cpuinit validate_pat_support(struct cpuinfo_x86 *c)
+{
+ switch (c->x86_vendor) {
+ case X86_VENDOR_AMD:
+ if (c->x86 >= 0xf && c->x86 <= 0x11)
+ return;
+ break;
+ case X86_VENDOR_INTEL:
+ if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15))
+ return;
+ break;
+ }
+
+ pat_disable(cpu_has_pat ?
+ "PAT disabled. Not yet verified on this CPU type." :
+ "PAT not supported by CPU.");
+}
+#endif
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 35b4f6a..d0463a9 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -12,6 +12,7 @@
#include <asm/mmu_context.h>
#include <asm/mtrr.h>
#include <asm/mce.h>
+#include <asm/pat.h>
#ifdef CONFIG_X86_LOCAL_APIC
#include <asm/mpspec.h>
#include <asm/apic.h>
@@ -308,19 +309,6 @@
}
- clear_cpu_cap(c, X86_FEATURE_PAT);
-
- switch (c->x86_vendor) {
- case X86_VENDOR_AMD:
- if (c->x86 >= 0xf && c->x86 <= 0x11)
- set_cpu_cap(c, X86_FEATURE_PAT);
- break;
- case X86_VENDOR_INTEL:
- if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15))
- set_cpu_cap(c, X86_FEATURE_PAT);
- break;
- }
-
}
/*
@@ -409,18 +397,6 @@
init_scattered_cpuid_features(c);
}
- clear_cpu_cap(c, X86_FEATURE_PAT);
-
- switch (c->x86_vendor) {
- case X86_VENDOR_AMD:
- if (c->x86 >= 0xf && c->x86 <= 0x11)
- set_cpu_cap(c, X86_FEATURE_PAT);
- break;
- case X86_VENDOR_INTEL:
- if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15))
- set_cpu_cap(c, X86_FEATURE_PAT);
- break;
- }
}
static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
@@ -651,6 +627,7 @@
cpu_devs[cvdev->vendor] = cvdev->cpu_dev;
early_cpu_detect();
+ validate_pat_support(&boot_cpu_data);
}
/* Make sure %fs is initialized properly in idle threads */
diff --git a/arch/x86/kernel/geode_32.c b/arch/x86/kernel/geode_32.c
index 9dad6ca..e8edd63 100644
--- a/arch/x86/kernel/geode_32.c
+++ b/arch/x86/kernel/geode_32.c
@@ -161,6 +161,25 @@
}
EXPORT_SYMBOL_GPL(geode_gpio_setup_event);
+int geode_has_vsa2(void)
+{
+ static int has_vsa2 = -1;
+
+ if (has_vsa2 == -1) {
+ /*
+ * The VSA has virtual registers that we can query for a
+ * signature.
+ */
+ outw(VSA_VR_UNLOCK, VSA_VRC_INDEX);
+ outw(VSA_VR_SIGNATURE, VSA_VRC_INDEX);
+
+ has_vsa2 = (inw(VSA_VRC_DATA) == VSA_SIG);
+ }
+
+ return has_vsa2;
+}
+EXPORT_SYMBOL_GPL(geode_has_vsa2);
+
static int __init geode_southbridge_init(void)
{
if (!is_geode())
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index db6839b..e03cc95 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -450,7 +450,6 @@
{
struct task_struct *tsk = current;
- clear_fpu(tsk);
return __copy_from_user(&tsk->thread.xstate->fsave, buf,
sizeof(struct i387_fsave_struct));
}
@@ -461,7 +460,6 @@
struct user_i387_ia32_struct env;
int err;
- clear_fpu(tsk);
err = __copy_from_user(&tsk->thread.xstate->fxsave, &buf->_fxsr_env[0],
sizeof(struct i387_fxsave_struct));
/* mxcsr reserved bits must be masked to zero for security reasons */
@@ -478,6 +476,16 @@
int err;
if (HAVE_HWFP) {
+ struct task_struct *tsk = current;
+
+ clear_fpu(tsk);
+
+ if (!used_math()) {
+ err = init_fpu(tsk);
+ if (err)
+ return err;
+ }
+
if (cpu_has_fxsr)
err = restore_i387_fxsave(buf);
else
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index ddee040..4bc1be5 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -133,6 +133,7 @@
return native_write_msr_safe(MSR_KVM_SYSTEM_TIME, low, high);
}
+#ifdef CONFIG_X86_LOCAL_APIC
static void kvm_setup_secondary_clock(void)
{
/*
@@ -143,6 +144,7 @@
/* ok, done with our trickery, call native */
setup_secondary_APIC_clock();
}
+#endif
/*
* After the clock is registered, the host will keep writing to the
@@ -177,7 +179,9 @@
pv_time_ops.get_wallclock = kvm_get_wallclock;
pv_time_ops.set_wallclock = kvm_set_wallclock;
pv_time_ops.sched_clock = kvm_clock_read;
+#ifdef CONFIG_X86_LOCAL_APIC
pv_apic_ops.setup_secondary_clock = kvm_setup_secondary_clock;
+#endif
machine_ops.shutdown = kvm_shutdown;
#ifdef CONFIG_KEXEC
machine_ops.crash_shutdown = kvm_crash_shutdown;
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 3e2c54d..404683b 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -794,6 +794,11 @@
ACPI-based MP Configuration
-------------------------------------------------------------------------- */
+/*
+ * Keep this outside and initialized to 0, for !CONFIG_ACPI builds:
+ */
+int es7000_plat;
+
#ifdef CONFIG_ACPI
#ifdef CONFIG_X86_IO_APIC
@@ -909,8 +914,6 @@
MP_intsrc_info(&intsrc);
}
-int es7000_plat;
-
void __init mp_config_acpi_legacy_irqs(void)
{
struct mpc_config_intsrc intsrc;
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 0c37f16..c5ef1af 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -385,11 +385,13 @@
if (dma_alloc_from_coherent_mem(dev, size, dma_handle, &memory))
return memory;
- if (!dev)
+ if (!dev) {
dev = &fallback_dev;
+ gfp |= GFP_DMA;
+ }
dma_mask = dev->coherent_dma_mask;
if (dma_mask == 0)
- dma_mask = DMA_32BIT_MASK;
+ dma_mask = (gfp & GFP_DMA) ? DMA_24BIT_MASK : DMA_32BIT_MASK;
/* Device not DMA able */
if (dev->dma_mask == NULL)
@@ -403,7 +405,7 @@
larger than 16MB and in this case we have a chance of
finding fitting memory in the next higher zone first. If
not retry with true GFP_DMA. -AK */
- if (dma_mask <= DMA_32BIT_MASK)
+ if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA))
gfp |= GFP_DMA32;
#endif
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index fb03ef3..a7835f2 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -1303,6 +1303,9 @@
#define genregs32_get genregs_get
#define genregs32_set genregs_set
+#define user_i387_ia32_struct user_i387_struct
+#define user32_fxsr_struct user_fxsr_struct
+
#endif /* CONFIG_X86_64 */
#if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
@@ -1315,13 +1318,13 @@
},
[REGSET_FP] = {
.core_note_type = NT_PRFPREG,
- .n = sizeof(struct user_i387_struct) / sizeof(u32),
+ .n = sizeof(struct user_i387_ia32_struct) / sizeof(u32),
.size = sizeof(u32), .align = sizeof(u32),
.active = fpregs_active, .get = fpregs_get, .set = fpregs_set
},
[REGSET_XFP] = {
.core_note_type = NT_PRXFPREG,
- .n = sizeof(struct user_i387_struct) / sizeof(u32),
+ .n = sizeof(struct user32_fxsr_struct) / sizeof(u32),
.size = sizeof(u32), .align = sizeof(u32),
.active = xfpregs_active, .get = xfpregs_get, .set = xfpregs_set
},
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 07c6d42..f6be7d5 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -149,7 +149,6 @@
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"),
- DMI_MATCH(DMI_BOARD_NAME, "0WF810"),
},
},
{ /* Handle problems with rebooting on Dell Optiplex 745's DFF*/
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index c0c68c1..6f80b85 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -12,6 +12,7 @@
#include <asm/mpspec.h>
#include <asm/apicdef.h>
+#ifdef CONFIG_X86_LOCAL_APIC
unsigned int num_processors;
unsigned disabled_cpus __cpuinitdata;
/* Processor that is doing the boot up */
@@ -23,8 +24,9 @@
/* Bitmask of physically existing CPUs */
physid_mask_t phys_cpu_present_map;
+#endif
-#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_SMP)
+#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_X86_SMP)
/*
* Copy data used in early init routines from the initial arrays to the
* per cpu data areas. These arrays then become expendable and the
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
index 2283422..2c5f8b2 100644
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -127,7 +127,12 @@
}, {
.name = "keyboard",
.start = 0x0060,
- .end = 0x006f,
+ .end = 0x0060,
+ .flags = IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+ .name = "keyboard",
+ .start = 0x0064,
+ .end = 0x0064,
.flags = IORESOURCE_BUSY | IORESOURCE_IO
}, {
.name = "dma page reg",
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index 22c14e2..6dff128 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -70,6 +70,7 @@
#include <asm/ds.h>
#include <asm/topology.h>
#include <asm/trampoline.h>
+#include <asm/pat.h>
#include <mach_apic.h>
#ifdef CONFIG_PARAVIRT
@@ -128,7 +129,9 @@
.flags = IORESOURCE_BUSY | IORESOURCE_IO },
{ .name = "timer1", .start = 0x50, .end = 0x53,
.flags = IORESOURCE_BUSY | IORESOURCE_IO },
- { .name = "keyboard", .start = 0x60, .end = 0x6f,
+ { .name = "keyboard", .start = 0x60, .end = 0x60,
+ .flags = IORESOURCE_BUSY | IORESOURCE_IO },
+ { .name = "keyboard", .start = 0x64, .end = 0x64,
.flags = IORESOURCE_BUSY | IORESOURCE_IO },
{ .name = "dma page reg", .start = 0x80, .end = 0x8f,
.flags = IORESOURCE_BUSY | IORESOURCE_IO },
@@ -948,7 +951,7 @@
static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
{
if (c->x86 == 0x6 && c->x86_model >= 0xf)
- set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability);
+ set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
}
static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
@@ -1063,25 +1066,19 @@
if (c->extended_cpuid_level >= 0x80000007)
c->x86_power = cpuid_edx(0x80000007);
-
- clear_cpu_cap(c, X86_FEATURE_PAT);
-
switch (c->x86_vendor) {
case X86_VENDOR_AMD:
early_init_amd(c);
- if (c->x86 >= 0xf && c->x86 <= 0x11)
- set_cpu_cap(c, X86_FEATURE_PAT);
break;
case X86_VENDOR_INTEL:
early_init_intel(c);
- if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15))
- set_cpu_cap(c, X86_FEATURE_PAT);
break;
case X86_VENDOR_CENTAUR:
early_init_centaur(c);
break;
}
+ validate_pat_support(c);
}
/*
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 8f75893..0cb7aad 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -231,7 +231,8 @@
wmb();
/* Send a message to other CPUs */
- if (cpus_equal(mask, allbutself))
+ if (cpus_equal(mask, allbutself) &&
+ cpus_equal(cpu_online_map, cpu_callout_map))
send_IPI_allbutself(CALL_FUNCTION_VECTOR);
else
send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 84241a2..3898849 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -86,6 +86,7 @@
#ifdef CONFIG_X86_32
u8 apicid_2_node[MAX_APICID];
+static int low_mappings;
#endif
/* State of each CPU */
@@ -299,7 +300,7 @@
/*
* Activate a secondary processor.
*/
-void __cpuinit start_secondary(void *unused)
+static void __cpuinit start_secondary(void *unused)
{
/*
* Don't put *anything* before cpu_init(), SMP booting is too
@@ -326,6 +327,12 @@
enable_8259A_irq(0);
}
+#ifdef CONFIG_X86_32
+ while (low_mappings)
+ cpu_relax();
+ __flush_tlb_all();
+#endif
+
/* This must be done before setting cpu_online_map */
set_cpu_sibling_map(raw_smp_processor_id());
wmb();
@@ -1040,14 +1047,20 @@
#ifdef CONFIG_X86_32
/* init low mem mapping */
clone_pgd_range(swapper_pg_dir, swapper_pg_dir + KERNEL_PGD_BOUNDARY,
- min_t(unsigned long, KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
+ min_t(unsigned long, KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
flush_tlb_all();
-#endif
+ low_mappings = 1;
err = do_boot_cpu(apicid, cpu);
- if (err < 0) {
+
+ zap_low_mappings();
+ low_mappings = 0;
+#else
+ err = do_boot_cpu(apicid, cpu);
+#endif
+ if (err) {
Dprintk("do_boot_cpu failed %d\n", err);
- return err;
+ return -EIO;
}
/*
@@ -1259,9 +1272,6 @@
setup_ioapic_dest();
#endif
check_nmi_watchdog();
-#ifdef CONFIG_X86_32
- zap_low_mappings();
-#endif
}
#ifdef CONFIG_HOTPLUG_CPU
@@ -1306,7 +1316,7 @@
cpu_clear(cpu, cpu_sibling_setup_map);
}
-int additional_cpus __initdata = -1;
+static int additional_cpus __initdata = -1;
static __init int setup_additional_cpus(char *s)
{
diff --git a/arch/x86/kernel/sys_i386_32.c b/arch/x86/kernel/sys_i386_32.c
index a86d26f..d2ab52c 100644
--- a/arch/x86/kernel/sys_i386_32.c
+++ b/arch/x86/kernel/sys_i386_32.c
@@ -22,23 +22,6 @@
#include <asm/uaccess.h>
#include <asm/unistd.h>
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way Unix traditionally does this, though.
- */
-asmlinkage int sys_pipe(unsigned long __user * fildes)
-{
- int fd[2];
- int error;
-
- error = do_pipe(fd);
- if (!error) {
- if (copy_to_user(fildes, fd, 2*sizeof(int)))
- error = -EFAULT;
- }
- return error;
-}
-
asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
unsigned long prot, unsigned long flags,
unsigned long fd, unsigned long pgoff)
diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c
index bd802a5..3b360ef 100644
--- a/arch/x86/kernel/sys_x86_64.c
+++ b/arch/x86/kernel/sys_x86_64.c
@@ -17,23 +17,6 @@
#include <asm/uaccess.h>
#include <asm/ia32.h>
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way Unix traditionally does this, though.
- */
-asmlinkage long sys_pipe(int __user *fildes)
-{
- int fd[2];
- int error;
-
- error = do_pipe(fd);
- if (!error) {
- if (copy_to_user(fildes, fd, 2*sizeof(int)))
- error = -EFAULT;
- }
- return error;
-}
-
asmlinkage long sys_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags,
unsigned long fd, unsigned long off)
{
diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c
index 58882f9..f6c05d0 100644
--- a/arch/x86/kernel/x8664_ksyms_64.c
+++ b/arch/x86/kernel/x8664_ksyms_64.c
@@ -2,6 +2,7 @@
All C exports should go in the respective C files. */
#include <linux/module.h>
+#include <net/checksum.h>
#include <linux/smp.h>
#include <asm/processor.h>
@@ -29,6 +30,8 @@
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(csum_partial);
+
/*
* Export string functions. We normally rely on gcc builtin for most of these,
* but gcc sometimes decides not to inline them.
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 361e316..3324d900 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -35,7 +35,7 @@
#include "i8254.h"
#ifndef CONFIG_X86_64
-#define mod_64(x, y) ((x) - (y) * div64_64(x, y))
+#define mod_64(x, y) ((x) - (y) * div64_u64(x, y))
#else
#define mod_64(x, y) ((x) % (y))
#endif
@@ -60,8 +60,8 @@
rl = (u64)u.l.low * (u64)b;
rh = (u64)u.l.high * (u64)b;
rh += (rl >> 32);
- res.l.high = div64_64(rh, c);
- res.l.low = div64_64(((mod_64(rh, c) << 32) + (rl & 0xffffffff)), c);
+ res.l.high = div64_u64(rh, c);
+ res.l.low = div64_u64(((mod_64(rh, c) << 32) + (rl & 0xffffffff)), c);
return res.ll;
}
@@ -288,6 +288,8 @@
* mode 1 is one shot, mode 2 is period, otherwise del timer */
switch (ps->channels[0].mode) {
case 1:
+ /* FIXME: enhance mode 4 precision */
+ case 4:
create_pit_timer(&ps->pit_timer, val, 0);
break;
case 2:
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 57ac4e4..36809d7 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -25,13 +25,13 @@
#include <linux/hrtimer.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/math64.h>
#include <asm/processor.h>
#include <asm/msr.h>
#include <asm/page.h>
#include <asm/current.h>
#include <asm/apicdef.h>
#include <asm/atomic.h>
-#include <asm/div64.h>
#include "irq.h"
#define PRId64 "d"
@@ -526,8 +526,8 @@
} else
passed = ktime_sub(now, apic->timer.last_update);
- counter_passed = div64_64(ktime_to_ns(passed),
- (APIC_BUS_CYCLE_NS * apic->timer.divide_count));
+ counter_passed = div64_u64(ktime_to_ns(passed),
+ (APIC_BUS_CYCLE_NS * apic->timer.divide_count));
if (counter_passed > tmcct) {
if (unlikely(!apic_lvtt_period(apic))) {
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 2ad6f54..36c5406 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -79,36 +79,6 @@
}
#endif
-#define PT64_PT_BITS 9
-#define PT64_ENT_PER_PAGE (1 << PT64_PT_BITS)
-#define PT32_PT_BITS 10
-#define PT32_ENT_PER_PAGE (1 << PT32_PT_BITS)
-
-#define PT_WRITABLE_SHIFT 1
-
-#define PT_PRESENT_MASK (1ULL << 0)
-#define PT_WRITABLE_MASK (1ULL << PT_WRITABLE_SHIFT)
-#define PT_USER_MASK (1ULL << 2)
-#define PT_PWT_MASK (1ULL << 3)
-#define PT_PCD_MASK (1ULL << 4)
-#define PT_ACCESSED_MASK (1ULL << 5)
-#define PT_DIRTY_MASK (1ULL << 6)
-#define PT_PAGE_SIZE_MASK (1ULL << 7)
-#define PT_PAT_MASK (1ULL << 7)
-#define PT_GLOBAL_MASK (1ULL << 8)
-#define PT64_NX_SHIFT 63
-#define PT64_NX_MASK (1ULL << PT64_NX_SHIFT)
-
-#define PT_PAT_SHIFT 7
-#define PT_DIR_PAT_SHIFT 12
-#define PT_DIR_PAT_MASK (1ULL << PT_DIR_PAT_SHIFT)
-
-#define PT32_DIR_PSE36_SIZE 4
-#define PT32_DIR_PSE36_SHIFT 13
-#define PT32_DIR_PSE36_MASK \
- (((1ULL << PT32_DIR_PSE36_SIZE) - 1) << PT32_DIR_PSE36_SHIFT)
-
-
#define PT_FIRST_AVAIL_BITS_SHIFT 9
#define PT64_SECOND_AVAIL_BITS_SHIFT 52
@@ -154,10 +124,6 @@
#define PFERR_USER_MASK (1U << 2)
#define PFERR_FETCH_MASK (1U << 4)
-#define PT64_ROOT_LEVEL 4
-#define PT32_ROOT_LEVEL 2
-#define PT32E_ROOT_LEVEL 3
-
#define PT_DIRECTORY_LEVEL 2
#define PT_PAGE_TABLE_LEVEL 1
@@ -186,6 +152,12 @@
static u64 __read_mostly shadow_trap_nonpresent_pte;
static u64 __read_mostly shadow_notrap_nonpresent_pte;
+static u64 __read_mostly shadow_base_present_pte;
+static u64 __read_mostly shadow_nx_mask;
+static u64 __read_mostly shadow_x_mask; /* mutual exclusive with nx_mask */
+static u64 __read_mostly shadow_user_mask;
+static u64 __read_mostly shadow_accessed_mask;
+static u64 __read_mostly shadow_dirty_mask;
void kvm_mmu_set_nonpresent_ptes(u64 trap_pte, u64 notrap_pte)
{
@@ -194,6 +166,23 @@
}
EXPORT_SYMBOL_GPL(kvm_mmu_set_nonpresent_ptes);
+void kvm_mmu_set_base_ptes(u64 base_pte)
+{
+ shadow_base_present_pte = base_pte;
+}
+EXPORT_SYMBOL_GPL(kvm_mmu_set_base_ptes);
+
+void kvm_mmu_set_mask_ptes(u64 user_mask, u64 accessed_mask,
+ u64 dirty_mask, u64 nx_mask, u64 x_mask)
+{
+ shadow_user_mask = user_mask;
+ shadow_accessed_mask = accessed_mask;
+ shadow_dirty_mask = dirty_mask;
+ shadow_nx_mask = nx_mask;
+ shadow_x_mask = x_mask;
+}
+EXPORT_SYMBOL_GPL(kvm_mmu_set_mask_ptes);
+
static int is_write_protection(struct kvm_vcpu *vcpu)
{
return vcpu->arch.cr0 & X86_CR0_WP;
@@ -232,7 +221,7 @@
static int is_dirty_pte(unsigned long pte)
{
- return pte & PT_DIRTY_MASK;
+ return pte & shadow_dirty_mask;
}
static int is_rmap_pte(u64 pte)
@@ -387,7 +376,6 @@
write_count = slot_largepage_idx(gfn, gfn_to_memslot(kvm, gfn));
*write_count += 1;
- WARN_ON(*write_count > KVM_PAGES_PER_HPAGE);
}
static void unaccount_shadowed(struct kvm *kvm, gfn_t gfn)
@@ -547,7 +535,7 @@
return;
sp = page_header(__pa(spte));
pfn = spte_to_pfn(*spte);
- if (*spte & PT_ACCESSED_MASK)
+ if (*spte & shadow_accessed_mask)
kvm_set_pfn_accessed(pfn);
if (is_writeble_pte(*spte))
kvm_release_pfn_dirty(pfn);
@@ -1073,17 +1061,17 @@
* whether the guest actually used the pte (in order to detect
* demand paging).
*/
- spte = PT_PRESENT_MASK | PT_DIRTY_MASK;
+ spte = shadow_base_present_pte | shadow_dirty_mask;
if (!speculative)
pte_access |= PT_ACCESSED_MASK;
if (!dirty)
pte_access &= ~ACC_WRITE_MASK;
- if (!(pte_access & ACC_EXEC_MASK))
- spte |= PT64_NX_MASK;
-
- spte |= PT_PRESENT_MASK;
+ if (pte_access & ACC_EXEC_MASK)
+ spte |= shadow_x_mask;
+ else
+ spte |= shadow_nx_mask;
if (pte_access & ACC_USER_MASK)
- spte |= PT_USER_MASK;
+ spte |= shadow_user_mask;
if (largepage)
spte |= PT_PAGE_SIZE_MASK;
@@ -1188,8 +1176,9 @@
return -ENOMEM;
}
- table[index] = __pa(new_table->spt) | PT_PRESENT_MASK
- | PT_WRITABLE_MASK | PT_USER_MASK;
+ table[index] = __pa(new_table->spt)
+ | PT_PRESENT_MASK | PT_WRITABLE_MASK
+ | shadow_user_mask | shadow_x_mask;
}
table_addr = table[index] & PT64_BASE_ADDR_MASK;
}
@@ -1244,7 +1233,6 @@
if (!VALID_PAGE(vcpu->arch.mmu.root_hpa))
return;
spin_lock(&vcpu->kvm->mmu_lock);
-#ifdef CONFIG_X86_64
if (vcpu->arch.mmu.shadow_root_level == PT64_ROOT_LEVEL) {
hpa_t root = vcpu->arch.mmu.root_hpa;
@@ -1256,7 +1244,6 @@
spin_unlock(&vcpu->kvm->mmu_lock);
return;
}
-#endif
for (i = 0; i < 4; ++i) {
hpa_t root = vcpu->arch.mmu.pae_root[i];
@@ -1282,7 +1269,6 @@
root_gfn = vcpu->arch.cr3 >> PAGE_SHIFT;
-#ifdef CONFIG_X86_64
if (vcpu->arch.mmu.shadow_root_level == PT64_ROOT_LEVEL) {
hpa_t root = vcpu->arch.mmu.root_hpa;
@@ -1297,7 +1283,6 @@
vcpu->arch.mmu.root_hpa = root;
return;
}
-#endif
metaphysical = !is_paging(vcpu);
if (tdp_enabled)
metaphysical = 1;
@@ -1377,7 +1362,7 @@
spin_lock(&vcpu->kvm->mmu_lock);
kvm_mmu_free_some_pages(vcpu);
r = __direct_map(vcpu, gpa, error_code & PFERR_WRITE_MASK,
- largepage, gfn, pfn, TDP_ROOT_LEVEL);
+ largepage, gfn, pfn, kvm_x86_ops->get_tdp_level());
spin_unlock(&vcpu->kvm->mmu_lock);
return r;
@@ -1484,7 +1469,7 @@
context->page_fault = tdp_page_fault;
context->free = nonpaging_free;
context->prefetch_page = nonpaging_prefetch_page;
- context->shadow_root_level = TDP_ROOT_LEVEL;
+ context->shadow_root_level = kvm_x86_ops->get_tdp_level();
context->root_hpa = INVALID_PAGE;
if (!is_paging(vcpu)) {
@@ -1633,7 +1618,7 @@
{
u64 *spte = vcpu->arch.last_pte_updated;
- return !!(spte && (*spte & PT_ACCESSED_MASK));
+ return !!(spte && (*spte & shadow_accessed_mask));
}
static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index e64e9f5..1730757 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -3,11 +3,38 @@
#include <linux/kvm_host.h>
-#ifdef CONFIG_X86_64
-#define TDP_ROOT_LEVEL PT64_ROOT_LEVEL
-#else
-#define TDP_ROOT_LEVEL PT32E_ROOT_LEVEL
-#endif
+#define PT64_PT_BITS 9
+#define PT64_ENT_PER_PAGE (1 << PT64_PT_BITS)
+#define PT32_PT_BITS 10
+#define PT32_ENT_PER_PAGE (1 << PT32_PT_BITS)
+
+#define PT_WRITABLE_SHIFT 1
+
+#define PT_PRESENT_MASK (1ULL << 0)
+#define PT_WRITABLE_MASK (1ULL << PT_WRITABLE_SHIFT)
+#define PT_USER_MASK (1ULL << 2)
+#define PT_PWT_MASK (1ULL << 3)
+#define PT_PCD_MASK (1ULL << 4)
+#define PT_ACCESSED_MASK (1ULL << 5)
+#define PT_DIRTY_MASK (1ULL << 6)
+#define PT_PAGE_SIZE_MASK (1ULL << 7)
+#define PT_PAT_MASK (1ULL << 7)
+#define PT_GLOBAL_MASK (1ULL << 8)
+#define PT64_NX_SHIFT 63
+#define PT64_NX_MASK (1ULL << PT64_NX_SHIFT)
+
+#define PT_PAT_SHIFT 7
+#define PT_DIR_PAT_SHIFT 12
+#define PT_DIR_PAT_MASK (1ULL << PT_DIR_PAT_SHIFT)
+
+#define PT32_DIR_PSE36_SIZE 4
+#define PT32_DIR_PSE36_SHIFT 13
+#define PT32_DIR_PSE36_MASK \
+ (((1ULL << PT32_DIR_PSE36_SIZE) - 1) << PT32_DIR_PSE36_SHIFT)
+
+#define PT64_ROOT_LEVEL 4
+#define PT32_ROOT_LEVEL 2
+#define PT32E_ROOT_LEVEL 3
static inline void kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu)
{
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 89e0be2..ab22615 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1863,6 +1863,15 @@
return false;
}
+static int get_npt_level(void)
+{
+#ifdef CONFIG_X86_64
+ return PT64_ROOT_LEVEL;
+#else
+ return PT32E_ROOT_LEVEL;
+#endif
+}
+
static struct kvm_x86_ops svm_x86_ops = {
.cpu_has_kvm_support = has_svm,
.disabled_by_bios = is_disabled,
@@ -1920,6 +1929,7 @@
.inject_pending_vectors = do_interrupt_requests,
.set_tss_addr = svm_set_tss_addr,
+ .get_tdp_level = get_npt_level,
};
static int __init svm_init(void)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 8e5d6645..bfe4db1 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -42,6 +42,9 @@
static int flexpriority_enabled = 1;
module_param(flexpriority_enabled, bool, 0);
+static int enable_ept = 1;
+module_param(enable_ept, bool, 0);
+
struct vmcs {
u32 revision_id;
u32 abort;
@@ -84,7 +87,7 @@
return container_of(vcpu, struct vcpu_vmx, vcpu);
}
-static int init_rmode_tss(struct kvm *kvm);
+static int init_rmode(struct kvm *kvm);
static DEFINE_PER_CPU(struct vmcs *, vmxarea);
static DEFINE_PER_CPU(struct vmcs *, current_vmcs);
@@ -107,6 +110,11 @@
u32 vmentry_ctrl;
} vmcs_config;
+struct vmx_capability {
+ u32 ept;
+ u32 vpid;
+} vmx_capability;
+
#define VMX_SEGMENT_FIELD(seg) \
[VCPU_SREG_##seg] = { \
.selector = GUEST_##seg##_SELECTOR, \
@@ -214,6 +222,32 @@
SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES);
}
+static inline int cpu_has_vmx_invept_individual_addr(void)
+{
+ return (!!(vmx_capability.ept & VMX_EPT_EXTENT_INDIVIDUAL_BIT));
+}
+
+static inline int cpu_has_vmx_invept_context(void)
+{
+ return (!!(vmx_capability.ept & VMX_EPT_EXTENT_CONTEXT_BIT));
+}
+
+static inline int cpu_has_vmx_invept_global(void)
+{
+ return (!!(vmx_capability.ept & VMX_EPT_EXTENT_GLOBAL_BIT));
+}
+
+static inline int cpu_has_vmx_ept(void)
+{
+ return (vmcs_config.cpu_based_2nd_exec_ctrl &
+ SECONDARY_EXEC_ENABLE_EPT);
+}
+
+static inline int vm_need_ept(void)
+{
+ return (cpu_has_vmx_ept() && enable_ept);
+}
+
static inline int vm_need_virtualize_apic_accesses(struct kvm *kvm)
{
return ((cpu_has_vmx_virtualize_apic_accesses()) &&
@@ -250,6 +284,18 @@
: : "a"(&operand), "c"(ext) : "cc", "memory");
}
+static inline void __invept(int ext, u64 eptp, gpa_t gpa)
+{
+ struct {
+ u64 eptp, gpa;
+ } operand = {eptp, gpa};
+
+ asm volatile (ASM_VMX_INVEPT
+ /* CF==1 or ZF==1 --> rc = -1 */
+ "; ja 1f ; ud2 ; 1:\n"
+ : : "a" (&operand), "c" (ext) : "cc", "memory");
+}
+
static struct kvm_msr_entry *find_msr_entry(struct vcpu_vmx *vmx, u32 msr)
{
int i;
@@ -301,6 +347,33 @@
__invvpid(VMX_VPID_EXTENT_SINGLE_CONTEXT, vmx->vpid, 0);
}
+static inline void ept_sync_global(void)
+{
+ if (cpu_has_vmx_invept_global())
+ __invept(VMX_EPT_EXTENT_GLOBAL, 0, 0);
+}
+
+static inline void ept_sync_context(u64 eptp)
+{
+ if (vm_need_ept()) {
+ if (cpu_has_vmx_invept_context())
+ __invept(VMX_EPT_EXTENT_CONTEXT, eptp, 0);
+ else
+ ept_sync_global();
+ }
+}
+
+static inline void ept_sync_individual_addr(u64 eptp, gpa_t gpa)
+{
+ if (vm_need_ept()) {
+ if (cpu_has_vmx_invept_individual_addr())
+ __invept(VMX_EPT_EXTENT_INDIVIDUAL_ADDR,
+ eptp, gpa);
+ else
+ ept_sync_context(eptp);
+ }
+}
+
static unsigned long vmcs_readl(unsigned long field)
{
unsigned long value;
@@ -388,6 +461,8 @@
eb |= 1u << 1;
if (vcpu->arch.rmode.active)
eb = ~0;
+ if (vm_need_ept())
+ eb &= ~(1u << PF_VECTOR); /* bypass_guest_pf = 0 */
vmcs_write32(EXCEPTION_BITMAP, eb);
}
@@ -985,7 +1060,7 @@
static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
{
u32 vmx_msr_low, vmx_msr_high;
- u32 min, opt;
+ u32 min, opt, min2, opt2;
u32 _pin_based_exec_control = 0;
u32 _cpu_based_exec_control = 0;
u32 _cpu_based_2nd_exec_control = 0;
@@ -1003,6 +1078,8 @@
CPU_BASED_CR8_LOAD_EXITING |
CPU_BASED_CR8_STORE_EXITING |
#endif
+ CPU_BASED_CR3_LOAD_EXITING |
+ CPU_BASED_CR3_STORE_EXITING |
CPU_BASED_USE_IO_BITMAPS |
CPU_BASED_MOV_DR_EXITING |
CPU_BASED_USE_TSC_OFFSETING;
@@ -1018,11 +1095,13 @@
~CPU_BASED_CR8_STORE_EXITING;
#endif
if (_cpu_based_exec_control & CPU_BASED_ACTIVATE_SECONDARY_CONTROLS) {
- min = 0;
- opt = SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES |
+ min2 = 0;
+ opt2 = SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES |
SECONDARY_EXEC_WBINVD_EXITING |
- SECONDARY_EXEC_ENABLE_VPID;
- if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_PROCBASED_CTLS2,
+ SECONDARY_EXEC_ENABLE_VPID |
+ SECONDARY_EXEC_ENABLE_EPT;
+ if (adjust_vmx_controls(min2, opt2,
+ MSR_IA32_VMX_PROCBASED_CTLS2,
&_cpu_based_2nd_exec_control) < 0)
return -EIO;
}
@@ -1031,6 +1110,16 @@
SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES))
_cpu_based_exec_control &= ~CPU_BASED_TPR_SHADOW;
#endif
+ if (_cpu_based_2nd_exec_control & SECONDARY_EXEC_ENABLE_EPT) {
+ /* CR3 accesses don't need to cause VM Exits when EPT enabled */
+ min &= ~(CPU_BASED_CR3_LOAD_EXITING |
+ CPU_BASED_CR3_STORE_EXITING);
+ if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_PROCBASED_CTLS,
+ &_cpu_based_exec_control) < 0)
+ return -EIO;
+ rdmsr(MSR_IA32_VMX_EPT_VPID_CAP,
+ vmx_capability.ept, vmx_capability.vpid);
+ }
min = 0;
#ifdef CONFIG_X86_64
@@ -1256,7 +1345,7 @@
fix_rmode_seg(VCPU_SREG_FS, &vcpu->arch.rmode.fs);
kvm_mmu_reset_context(vcpu);
- init_rmode_tss(vcpu->kvm);
+ init_rmode(vcpu->kvm);
}
#ifdef CONFIG_X86_64
@@ -1304,8 +1393,64 @@
vcpu->arch.cr4 |= vmcs_readl(GUEST_CR4) & ~KVM_GUEST_CR4_MASK;
}
+static void ept_load_pdptrs(struct kvm_vcpu *vcpu)
+{
+ if (is_paging(vcpu) && is_pae(vcpu) && !is_long_mode(vcpu)) {
+ if (!load_pdptrs(vcpu, vcpu->arch.cr3)) {
+ printk(KERN_ERR "EPT: Fail to load pdptrs!\n");
+ return;
+ }
+ vmcs_write64(GUEST_PDPTR0, vcpu->arch.pdptrs[0]);
+ vmcs_write64(GUEST_PDPTR1, vcpu->arch.pdptrs[1]);
+ vmcs_write64(GUEST_PDPTR2, vcpu->arch.pdptrs[2]);
+ vmcs_write64(GUEST_PDPTR3, vcpu->arch.pdptrs[3]);
+ }
+}
+
+static void vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4);
+
+static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
+ unsigned long cr0,
+ struct kvm_vcpu *vcpu)
+{
+ if (!(cr0 & X86_CR0_PG)) {
+ /* From paging/starting to nonpaging */
+ vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
+ vmcs_config.cpu_based_exec_ctrl |
+ (CPU_BASED_CR3_LOAD_EXITING |
+ CPU_BASED_CR3_STORE_EXITING));
+ vcpu->arch.cr0 = cr0;
+ vmx_set_cr4(vcpu, vcpu->arch.cr4);
+ *hw_cr0 |= X86_CR0_PE | X86_CR0_PG;
+ *hw_cr0 &= ~X86_CR0_WP;
+ } else if (!is_paging(vcpu)) {
+ /* From nonpaging to paging */
+ vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
+ vmcs_config.cpu_based_exec_ctrl &
+ ~(CPU_BASED_CR3_LOAD_EXITING |
+ CPU_BASED_CR3_STORE_EXITING));
+ vcpu->arch.cr0 = cr0;
+ vmx_set_cr4(vcpu, vcpu->arch.cr4);
+ if (!(vcpu->arch.cr0 & X86_CR0_WP))
+ *hw_cr0 &= ~X86_CR0_WP;
+ }
+}
+
+static void ept_update_paging_mode_cr4(unsigned long *hw_cr4,
+ struct kvm_vcpu *vcpu)
+{
+ if (!is_paging(vcpu)) {
+ *hw_cr4 &= ~X86_CR4_PAE;
+ *hw_cr4 |= X86_CR4_PSE;
+ } else if (!(vcpu->arch.cr4 & X86_CR4_PAE))
+ *hw_cr4 &= ~X86_CR4_PAE;
+}
+
static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
{
+ unsigned long hw_cr0 = (cr0 & ~KVM_GUEST_CR0_MASK) |
+ KVM_VM_CR0_ALWAYS_ON;
+
vmx_fpu_deactivate(vcpu);
if (vcpu->arch.rmode.active && (cr0 & X86_CR0_PE))
@@ -1323,29 +1468,61 @@
}
#endif
+ if (vm_need_ept())
+ ept_update_paging_mode_cr0(&hw_cr0, cr0, vcpu);
+
vmcs_writel(CR0_READ_SHADOW, cr0);
- vmcs_writel(GUEST_CR0,
- (cr0 & ~KVM_GUEST_CR0_MASK) | KVM_VM_CR0_ALWAYS_ON);
+ vmcs_writel(GUEST_CR0, hw_cr0);
vcpu->arch.cr0 = cr0;
if (!(cr0 & X86_CR0_TS) || !(cr0 & X86_CR0_PE))
vmx_fpu_activate(vcpu);
}
+static u64 construct_eptp(unsigned long root_hpa)
+{
+ u64 eptp;
+
+ /* TODO write the value reading from MSR */
+ eptp = VMX_EPT_DEFAULT_MT |
+ VMX_EPT_DEFAULT_GAW << VMX_EPT_GAW_EPTP_SHIFT;
+ eptp |= (root_hpa & PAGE_MASK);
+
+ return eptp;
+}
+
static void vmx_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
{
+ unsigned long guest_cr3;
+ u64 eptp;
+
+ guest_cr3 = cr3;
+ if (vm_need_ept()) {
+ eptp = construct_eptp(cr3);
+ vmcs_write64(EPT_POINTER, eptp);
+ ept_sync_context(eptp);
+ ept_load_pdptrs(vcpu);
+ guest_cr3 = is_paging(vcpu) ? vcpu->arch.cr3 :
+ VMX_EPT_IDENTITY_PAGETABLE_ADDR;
+ }
+
vmx_flush_tlb(vcpu);
- vmcs_writel(GUEST_CR3, cr3);
+ vmcs_writel(GUEST_CR3, guest_cr3);
if (vcpu->arch.cr0 & X86_CR0_PE)
vmx_fpu_deactivate(vcpu);
}
static void vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
{
- vmcs_writel(CR4_READ_SHADOW, cr4);
- vmcs_writel(GUEST_CR4, cr4 | (vcpu->arch.rmode.active ?
- KVM_RMODE_VM_CR4_ALWAYS_ON : KVM_PMODE_VM_CR4_ALWAYS_ON));
+ unsigned long hw_cr4 = cr4 | (vcpu->arch.rmode.active ?
+ KVM_RMODE_VM_CR4_ALWAYS_ON : KVM_PMODE_VM_CR4_ALWAYS_ON);
+
vcpu->arch.cr4 = cr4;
+ if (vm_need_ept())
+ ept_update_paging_mode_cr4(&hw_cr4, vcpu);
+
+ vmcs_writel(CR4_READ_SHADOW, cr4);
+ vmcs_writel(GUEST_CR4, hw_cr4);
}
static void vmx_set_efer(struct kvm_vcpu *vcpu, u64 efer)
@@ -1530,6 +1707,41 @@
return ret;
}
+static int init_rmode_identity_map(struct kvm *kvm)
+{
+ int i, r, ret;
+ pfn_t identity_map_pfn;
+ u32 tmp;
+
+ if (!vm_need_ept())
+ return 1;
+ if (unlikely(!kvm->arch.ept_identity_pagetable)) {
+ printk(KERN_ERR "EPT: identity-mapping pagetable "
+ "haven't been allocated!\n");
+ return 0;
+ }
+ if (likely(kvm->arch.ept_identity_pagetable_done))
+ return 1;
+ ret = 0;
+ identity_map_pfn = VMX_EPT_IDENTITY_PAGETABLE_ADDR >> PAGE_SHIFT;
+ r = kvm_clear_guest_page(kvm, identity_map_pfn, 0, PAGE_SIZE);
+ if (r < 0)
+ goto out;
+ /* Set up identity-mapping pagetable for EPT in real mode */
+ for (i = 0; i < PT32_ENT_PER_PAGE; i++) {
+ tmp = (i << 22) + (_PAGE_PRESENT | _PAGE_RW | _PAGE_USER |
+ _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_PSE);
+ r = kvm_write_guest_page(kvm, identity_map_pfn,
+ &tmp, i * sizeof(tmp), sizeof(tmp));
+ if (r < 0)
+ goto out;
+ }
+ kvm->arch.ept_identity_pagetable_done = true;
+ ret = 1;
+out:
+ return ret;
+}
+
static void seg_setup(int seg)
{
struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
@@ -1564,6 +1776,31 @@
return r;
}
+static int alloc_identity_pagetable(struct kvm *kvm)
+{
+ struct kvm_userspace_memory_region kvm_userspace_mem;
+ int r = 0;
+
+ down_write(&kvm->slots_lock);
+ if (kvm->arch.ept_identity_pagetable)
+ goto out;
+ kvm_userspace_mem.slot = IDENTITY_PAGETABLE_PRIVATE_MEMSLOT;
+ kvm_userspace_mem.flags = 0;
+ kvm_userspace_mem.guest_phys_addr = VMX_EPT_IDENTITY_PAGETABLE_ADDR;
+ kvm_userspace_mem.memory_size = PAGE_SIZE;
+ r = __kvm_set_memory_region(kvm, &kvm_userspace_mem, 0);
+ if (r)
+ goto out;
+
+ down_read(¤t->mm->mmap_sem);
+ kvm->arch.ept_identity_pagetable = gfn_to_page(kvm,
+ VMX_EPT_IDENTITY_PAGETABLE_ADDR >> PAGE_SHIFT);
+ up_read(¤t->mm->mmap_sem);
+out:
+ up_write(&kvm->slots_lock);
+ return r;
+}
+
static void allocate_vpid(struct vcpu_vmx *vmx)
{
int vpid;
@@ -1638,6 +1875,9 @@
CPU_BASED_CR8_LOAD_EXITING;
#endif
}
+ if (!vm_need_ept())
+ exec_control |= CPU_BASED_CR3_STORE_EXITING |
+ CPU_BASED_CR3_LOAD_EXITING;
vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, exec_control);
if (cpu_has_secondary_exec_ctrls()) {
@@ -1647,6 +1887,8 @@
~SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES;
if (vmx->vpid == 0)
exec_control &= ~SECONDARY_EXEC_ENABLE_VPID;
+ if (!vm_need_ept())
+ exec_control &= ~SECONDARY_EXEC_ENABLE_EPT;
vmcs_write32(SECONDARY_VM_EXEC_CONTROL, exec_control);
}
@@ -1722,6 +1964,15 @@
return 0;
}
+static int init_rmode(struct kvm *kvm)
+{
+ if (!init_rmode_tss(kvm))
+ return 0;
+ if (!init_rmode_identity_map(kvm))
+ return 0;
+ return 1;
+}
+
static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -1729,7 +1980,7 @@
int ret;
down_read(&vcpu->kvm->slots_lock);
- if (!init_rmode_tss(vmx->vcpu.kvm)) {
+ if (!init_rmode(vmx->vcpu.kvm)) {
ret = -ENOMEM;
goto out;
}
@@ -1994,6 +2245,9 @@
if (intr_info & INTR_INFO_DELIVER_CODE_MASK)
error_code = vmcs_read32(VM_EXIT_INTR_ERROR_CODE);
if (is_page_fault(intr_info)) {
+ /* EPT won't cause page fault directly */
+ if (vm_need_ept())
+ BUG();
cr2 = vmcs_readl(EXIT_QUALIFICATION);
KVMTRACE_3D(PAGE_FAULT, vcpu, error_code, (u32)cr2,
(u32)((u64)cr2 >> 32), handler);
@@ -2323,6 +2577,64 @@
return kvm_task_switch(vcpu, tss_selector, reason);
}
+static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ u64 exit_qualification;
+ enum emulation_result er;
+ gpa_t gpa;
+ unsigned long hva;
+ int gla_validity;
+ int r;
+
+ exit_qualification = vmcs_read64(EXIT_QUALIFICATION);
+
+ if (exit_qualification & (1 << 6)) {
+ printk(KERN_ERR "EPT: GPA exceeds GAW!\n");
+ return -ENOTSUPP;
+ }
+
+ gla_validity = (exit_qualification >> 7) & 0x3;
+ if (gla_validity != 0x3 && gla_validity != 0x1 && gla_validity != 0) {
+ printk(KERN_ERR "EPT: Handling EPT violation failed!\n");
+ printk(KERN_ERR "EPT: GPA: 0x%lx, GVA: 0x%lx\n",
+ (long unsigned int)vmcs_read64(GUEST_PHYSICAL_ADDRESS),
+ (long unsigned int)vmcs_read64(GUEST_LINEAR_ADDRESS));
+ printk(KERN_ERR "EPT: Exit qualification is 0x%lx\n",
+ (long unsigned int)exit_qualification);
+ kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
+ kvm_run->hw.hardware_exit_reason = 0;
+ return -ENOTSUPP;
+ }
+
+ gpa = vmcs_read64(GUEST_PHYSICAL_ADDRESS);
+ hva = gfn_to_hva(vcpu->kvm, gpa >> PAGE_SHIFT);
+ if (!kvm_is_error_hva(hva)) {
+ r = kvm_mmu_page_fault(vcpu, gpa & PAGE_MASK, 0);
+ if (r < 0) {
+ printk(KERN_ERR "EPT: Not enough memory!\n");
+ return -ENOMEM;
+ }
+ return 1;
+ } else {
+ /* must be MMIO */
+ er = emulate_instruction(vcpu, kvm_run, 0, 0, 0);
+
+ if (er == EMULATE_FAIL) {
+ printk(KERN_ERR
+ "EPT: Fail to handle EPT violation vmexit!er is %d\n",
+ er);
+ printk(KERN_ERR "EPT: GPA: 0x%lx, GVA: 0x%lx\n",
+ (long unsigned int)vmcs_read64(GUEST_PHYSICAL_ADDRESS),
+ (long unsigned int)vmcs_read64(GUEST_LINEAR_ADDRESS));
+ printk(KERN_ERR "EPT: Exit qualification is 0x%lx\n",
+ (long unsigned int)exit_qualification);
+ return -ENOTSUPP;
+ } else if (er == EMULATE_DO_MMIO)
+ return 0;
+ }
+ return 1;
+}
+
/*
* The exit handlers return 1 if the exit was handled fully and guest execution
* may resume. Otherwise they set the kvm_run parameter to indicate what needs
@@ -2346,6 +2658,7 @@
[EXIT_REASON_APIC_ACCESS] = handle_apic_access,
[EXIT_REASON_WBINVD] = handle_wbinvd,
[EXIT_REASON_TASK_SWITCH] = handle_task_switch,
+ [EXIT_REASON_EPT_VIOLATION] = handle_ept_violation,
};
static const int kvm_vmx_max_exit_handlers =
@@ -2364,6 +2677,13 @@
KVMTRACE_3D(VMEXIT, vcpu, exit_reason, (u32)vmcs_readl(GUEST_RIP),
(u32)((u64)vmcs_readl(GUEST_RIP) >> 32), entryexit);
+ /* Access CR3 don't cause VMExit in paging mode, so we need
+ * to sync with guest real CR3. */
+ if (vm_need_ept() && is_paging(vcpu)) {
+ vcpu->arch.cr3 = vmcs_readl(GUEST_CR3);
+ ept_load_pdptrs(vcpu);
+ }
+
if (unlikely(vmx->fail)) {
kvm_run->exit_reason = KVM_EXIT_FAIL_ENTRY;
kvm_run->fail_entry.hardware_entry_failure_reason
@@ -2372,7 +2692,8 @@
}
if ((vectoring_info & VECTORING_INFO_VALID_MASK) &&
- exit_reason != EXIT_REASON_EXCEPTION_NMI)
+ (exit_reason != EXIT_REASON_EXCEPTION_NMI &&
+ exit_reason != EXIT_REASON_EPT_VIOLATION))
printk(KERN_WARNING "%s: unexpected, valid vectoring info and "
"exit reason is 0x%x\n", __func__, exit_reason);
if (exit_reason < kvm_vmx_max_exit_handlers
@@ -2674,6 +2995,15 @@
return ERR_PTR(-ENOMEM);
allocate_vpid(vmx);
+ if (id == 0 && vm_need_ept()) {
+ kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
+ VMX_EPT_WRITABLE_MASK |
+ VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
+ kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK,
+ VMX_EPT_FAKE_DIRTY_MASK, 0ull,
+ VMX_EPT_EXECUTABLE_MASK);
+ kvm_enable_tdp();
+ }
err = kvm_vcpu_init(&vmx->vcpu, kvm, id);
if (err)
@@ -2706,6 +3036,10 @@
if (alloc_apic_access_page(kvm) != 0)
goto free_vmcs;
+ if (vm_need_ept())
+ if (alloc_identity_pagetable(kvm) != 0)
+ goto free_vmcs;
+
return &vmx->vcpu;
free_vmcs:
@@ -2735,6 +3069,11 @@
}
}
+static int get_ept_level(void)
+{
+ return VMX_EPT_DEFAULT_GAW + 1;
+}
+
static struct kvm_x86_ops vmx_x86_ops = {
.cpu_has_kvm_support = cpu_has_kvm_support,
.disabled_by_bios = vmx_disabled_by_bios,
@@ -2791,6 +3130,7 @@
.inject_pending_vectors = do_interrupt_requests,
.set_tss_addr = vmx_set_tss_addr,
+ .get_tdp_level = get_ept_level,
};
static int __init vmx_init(void)
@@ -2843,9 +3183,14 @@
vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_ESP);
vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_EIP);
+ if (cpu_has_vmx_ept())
+ bypass_guest_pf = 0;
+
if (bypass_guest_pf)
kvm_mmu_set_nonpresent_ptes(~0xffeull, 0ull);
+ ept_sync_global();
+
return 0;
out2:
diff --git a/arch/x86/kvm/vmx.h b/arch/x86/kvm/vmx.h
index 5dff460..79d94c6 100644
--- a/arch/x86/kvm/vmx.h
+++ b/arch/x86/kvm/vmx.h
@@ -35,6 +35,8 @@
#define CPU_BASED_MWAIT_EXITING 0x00000400
#define CPU_BASED_RDPMC_EXITING 0x00000800
#define CPU_BASED_RDTSC_EXITING 0x00001000
+#define CPU_BASED_CR3_LOAD_EXITING 0x00008000
+#define CPU_BASED_CR3_STORE_EXITING 0x00010000
#define CPU_BASED_CR8_LOAD_EXITING 0x00080000
#define CPU_BASED_CR8_STORE_EXITING 0x00100000
#define CPU_BASED_TPR_SHADOW 0x00200000
@@ -49,6 +51,7 @@
* Definitions of Secondary Processor-Based VM-Execution Controls.
*/
#define SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES 0x00000001
+#define SECONDARY_EXEC_ENABLE_EPT 0x00000002
#define SECONDARY_EXEC_ENABLE_VPID 0x00000020
#define SECONDARY_EXEC_WBINVD_EXITING 0x00000040
@@ -100,10 +103,22 @@
VIRTUAL_APIC_PAGE_ADDR_HIGH = 0x00002013,
APIC_ACCESS_ADDR = 0x00002014,
APIC_ACCESS_ADDR_HIGH = 0x00002015,
+ EPT_POINTER = 0x0000201a,
+ EPT_POINTER_HIGH = 0x0000201b,
+ GUEST_PHYSICAL_ADDRESS = 0x00002400,
+ GUEST_PHYSICAL_ADDRESS_HIGH = 0x00002401,
VMCS_LINK_POINTER = 0x00002800,
VMCS_LINK_POINTER_HIGH = 0x00002801,
GUEST_IA32_DEBUGCTL = 0x00002802,
GUEST_IA32_DEBUGCTL_HIGH = 0x00002803,
+ GUEST_PDPTR0 = 0x0000280a,
+ GUEST_PDPTR0_HIGH = 0x0000280b,
+ GUEST_PDPTR1 = 0x0000280c,
+ GUEST_PDPTR1_HIGH = 0x0000280d,
+ GUEST_PDPTR2 = 0x0000280e,
+ GUEST_PDPTR2_HIGH = 0x0000280f,
+ GUEST_PDPTR3 = 0x00002810,
+ GUEST_PDPTR3_HIGH = 0x00002811,
PIN_BASED_VM_EXEC_CONTROL = 0x00004000,
CPU_BASED_VM_EXEC_CONTROL = 0x00004002,
EXCEPTION_BITMAP = 0x00004004,
@@ -226,6 +241,8 @@
#define EXIT_REASON_MWAIT_INSTRUCTION 36
#define EXIT_REASON_TPR_BELOW_THRESHOLD 43
#define EXIT_REASON_APIC_ACCESS 44
+#define EXIT_REASON_EPT_VIOLATION 48
+#define EXIT_REASON_EPT_MISCONFIG 49
#define EXIT_REASON_WBINVD 54
/*
@@ -316,15 +333,36 @@
#define MSR_IA32_VMX_CR4_FIXED1 0x489
#define MSR_IA32_VMX_VMCS_ENUM 0x48a
#define MSR_IA32_VMX_PROCBASED_CTLS2 0x48b
+#define MSR_IA32_VMX_EPT_VPID_CAP 0x48c
#define MSR_IA32_FEATURE_CONTROL 0x3a
#define MSR_IA32_FEATURE_CONTROL_LOCKED 0x1
#define MSR_IA32_FEATURE_CONTROL_VMXON_ENABLED 0x4
#define APIC_ACCESS_PAGE_PRIVATE_MEMSLOT 9
+#define IDENTITY_PAGETABLE_PRIVATE_MEMSLOT 10
#define VMX_NR_VPIDS (1 << 16)
#define VMX_VPID_EXTENT_SINGLE_CONTEXT 1
#define VMX_VPID_EXTENT_ALL_CONTEXT 2
+#define VMX_EPT_EXTENT_INDIVIDUAL_ADDR 0
+#define VMX_EPT_EXTENT_CONTEXT 1
+#define VMX_EPT_EXTENT_GLOBAL 2
+#define VMX_EPT_EXTENT_INDIVIDUAL_BIT (1ull << 24)
+#define VMX_EPT_EXTENT_CONTEXT_BIT (1ull << 25)
+#define VMX_EPT_EXTENT_GLOBAL_BIT (1ull << 26)
+#define VMX_EPT_DEFAULT_GAW 3
+#define VMX_EPT_MAX_GAW 0x4
+#define VMX_EPT_MT_EPTE_SHIFT 3
+#define VMX_EPT_GAW_EPTP_SHIFT 3
+#define VMX_EPT_DEFAULT_MT 0x6ull
+#define VMX_EPT_READABLE_MASK 0x1ull
+#define VMX_EPT_WRITABLE_MASK 0x2ull
+#define VMX_EPT_EXECUTABLE_MASK 0x4ull
+#define VMX_EPT_FAKE_ACCESSED_MASK (1ull << 62)
+#define VMX_EPT_FAKE_DIRTY_MASK (1ull << 63)
+
+#define VMX_EPT_IDENTITY_PAGETABLE_ADDR 0xfffbc000ul
+
#endif
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 0ce5563..21338bd 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2417,6 +2417,9 @@
kvm_x86_ops = ops;
kvm_mmu_set_nonpresent_ptes(0ull, 0ull);
+ kvm_mmu_set_base_ptes(PT_PRESENT_MASK);
+ kvm_mmu_set_mask_ptes(PT_USER_MASK, PT_ACCESSED_MASK,
+ PT_DIRTY_MASK, PT64_NX_MASK, 0);
return 0;
out:
@@ -3019,6 +3022,8 @@
kvm_x86_ops->decache_regs(vcpu);
+ vcpu->arch.exception.pending = false;
+
vcpu_put(vcpu);
return 0;
@@ -3481,7 +3486,7 @@
}
if (reason == TASK_SWITCH_IRET || reason == TASK_SWITCH_JMP) {
- cseg_desc.type &= ~(1 << 8); //clear the B flag
+ cseg_desc.type &= ~(1 << 1); //clear the B flag
save_guest_segment_descriptor(vcpu, tr_seg.selector,
&cseg_desc);
}
@@ -3507,7 +3512,7 @@
}
if (reason != TASK_SWITCH_IRET) {
- nseg_desc.type |= (1 << 8);
+ nseg_desc.type |= (1 << 1);
save_guest_segment_descriptor(vcpu, tss_selector,
&nseg_desc);
}
@@ -3698,10 +3703,19 @@
{
unsigned after_mxcsr_mask;
+ /*
+ * Touch the fpu the first time in non atomic context as if
+ * this is the first fpu instruction the exception handler
+ * will fire before the instruction returns and it'll have to
+ * allocate ram with GFP_KERNEL.
+ */
+ if (!used_math())
+ fx_save(&vcpu->arch.host_fx_image);
+
/* Initialize guest FPU by resetting ours and saving into guest's */
preempt_disable();
fx_save(&vcpu->arch.host_fx_image);
- fpu_init();
+ fx_finit();
fx_save(&vcpu->arch.guest_fx_image);
fx_restore(&vcpu->arch.host_fx_image);
preempt_enable();
@@ -3906,6 +3920,8 @@
kvm_free_physmem(kvm);
if (kvm->arch.apic_access_page)
put_page(kvm->arch.apic_access_page);
+ if (kvm->arch.ept_identity_pagetable)
+ put_page(kvm->arch.ept_identity_pagetable);
kfree(kvm);
}
diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index 2ca0838..f2a696d 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -1761,6 +1761,7 @@
case 6: /* lmsw */
realmode_lmsw(ctxt->vcpu, (u16)c->src.val,
&ctxt->eflags);
+ c->dst.type = OP_NONE;
break;
case 7: /* invlpg*/
emulate_invlpg(ctxt->vcpu, memop);
diff --git a/arch/x86/lib/csum-partial_64.c b/arch/x86/lib/csum-partial_64.c
index bc503f5..bf51144 100644
--- a/arch/x86/lib/csum-partial_64.c
+++ b/arch/x86/lib/csum-partial_64.c
@@ -136,8 +136,6 @@
(__force u32)sum);
}
-EXPORT_SYMBOL(csum_partial);
-
/*
* this routine is used for miscellaneous IP-like checksums, mainly
* in icmp.c
diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c
index 1837885..914ccf9 100644
--- a/arch/x86/mm/discontig_32.c
+++ b/arch/x86/mm/discontig_32.c
@@ -476,29 +476,3 @@
EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
#endif
-
-#ifndef CONFIG_HAVE_ARCH_PARSE_SRAT
-/*
- * XXX FIXME: Make SLIT table parsing available to 32-bit NUMA
- *
- * These stub functions are needed to compile 32-bit NUMA when SRAT is
- * not set. There are functions in srat_64.c for parsing this table
- * and it may be possible to make them common functions.
- */
-void acpi_numa_slit_init (struct acpi_table_slit *slit)
-{
- printk(KERN_INFO "ACPI: No support for parsing SLIT table\n");
-}
-
-void acpi_numa_processor_affinity_init (struct acpi_srat_cpu_affinity *pa)
-{
-}
-
-void acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma)
-{
-}
-
-void acpi_numa_arch_fixup(void)
-{
-}
-#endif /* CONFIG_HAVE_ARCH_PARSE_SRAT */
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index de236e4..ec30d10 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -438,8 +438,6 @@
{
int i;
- save_pg_dir();
-
/*
* Zap initial low-memory mappings.
*
@@ -663,16 +661,8 @@
test_wp_bit();
cpa_init();
-
- /*
- * Subtle. SMP is doing it's boot stuff late (because it has to
- * fork idle threads) - but it also needs low mappings for the
- * protected-mode entry to work. We zap these entries only after
- * the WP-bit has been tested.
- */
-#ifndef CONFIG_SMP
+ save_pg_dir();
zap_low_mappings();
-#endif
}
#ifdef CONFIG_MEMORY_HOTPLUG
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 277446c..bcb1a8e 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -25,31 +25,24 @@
#include <asm/mtrr.h>
#include <asm/io.h>
-int pat_wc_enabled = 1;
+#ifdef CONFIG_X86_PAT
+int __read_mostly pat_wc_enabled = 1;
-static u64 __read_mostly boot_pat_state;
+void __init pat_disable(char *reason)
+{
+ pat_wc_enabled = 0;
+ printk(KERN_INFO "%s\n", reason);
+}
static int nopat(char *str)
{
- pat_wc_enabled = 0;
- printk(KERN_INFO "x86: PAT support disabled.\n");
-
+ pat_disable("PAT support disabled.");
return 0;
}
early_param("nopat", nopat);
+#endif
-static int pat_known_cpu(void)
-{
- if (!pat_wc_enabled)
- return 0;
-
- if (cpu_has_pat)
- return 1;
-
- pat_wc_enabled = 0;
- printk(KERN_INFO "CPU and/or kernel does not support PAT.\n");
- return 0;
-}
+static u64 __read_mostly boot_pat_state;
enum {
PAT_UC = 0, /* uncached */
@@ -66,17 +59,19 @@
{
u64 pat;
-#ifndef CONFIG_X86_PAT
- nopat(NULL);
-#endif
-
- /* Boot CPU enables PAT based on CPU feature */
- if (!smp_processor_id() && !pat_known_cpu())
+ if (!pat_wc_enabled)
return;
- /* APs enable PAT iff boot CPU has enabled it before */
- if (smp_processor_id() && !pat_wc_enabled)
- return;
+ /* Paranoia check. */
+ if (!cpu_has_pat) {
+ printk(KERN_ERR "PAT enabled, but CPU feature cleared\n");
+ /*
+ * Panic if this happens on the secondary CPU, and we
+ * switched to PAT on the boot CPU. We have no way to
+ * undo PAT.
+ */
+ BUG_ON(boot_pat_state);
+ }
/* Set PWT to Write-Combining. All other bits stay the same */
/*
@@ -95,9 +90,8 @@
PAT(4,WB) | PAT(5,WC) | PAT(6,UC_MINUS) | PAT(7,UC);
/* Boot CPU check */
- if (!smp_processor_id()) {
+ if (!boot_pat_state)
rdmsrl(MSR_IA32_CR_PAT, boot_pat_state);
- }
wrmsrl(MSR_IA32_CR_PAT, pat);
printk(KERN_INFO "x86 PAT enabled: cpu %d, old 0x%Lx, new 0x%Lx\n",
@@ -561,7 +555,7 @@
"%s:%d /dev/mem ioremap_change_attr failed %s for %Lx-%Lx\n",
current->comm, current->pid,
cattr_name(flags),
- offset, offset + size);
+ offset, (unsigned long long)(offset + size));
return 0;
}
@@ -582,7 +576,7 @@
"%s:%d /dev/mem expected mapping type %s for %Lx-%Lx, got %s\n",
current->comm, current->pid,
cattr_name(want_flags),
- addr, addr + size,
+ addr, (unsigned long long)(addr + size),
cattr_name(flags));
}
}
diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c
index 9ee007b..369cf06 100644
--- a/arch/x86/mm/pgtable_32.c
+++ b/arch/x86/mm/pgtable_32.c
@@ -172,10 +172,3 @@
__FIXADDR_TOP = -reserve - PAGE_SIZE;
__VMALLOC_RESERVE += reserve;
}
-
-int pmd_bad(pmd_t pmd)
-{
- WARN_ON_ONCE(pmd_bad_v1(pmd) != pmd_bad_v2(pmd));
-
- return pmd_bad_v1(pmd);
-}
diff --git a/arch/x86/pci/Makefile_32 b/arch/x86/pci/Makefile_32
index 7fa5198..89ec35d 100644
--- a/arch/x86/pci/Makefile_32
+++ b/arch/x86/pci/Makefile_32
@@ -6,11 +6,19 @@
obj-$(CONFIG_PCI_OLPC) += olpc.o
pci-y := fixup.o
+
+# Do not change the ordering here. There is a nasty init function
+# ordering dependency which breaks when you move acpi.o below
+# legacy/irq.o
pci-$(CONFIG_ACPI) += acpi.o
pci-y += legacy.o irq.o
-pci-$(CONFIG_X86_VISWS) += visws.o fixup.o
-pci-$(CONFIG_X86_NUMAQ) += numa.o irq.o
+# Careful: VISWS and NUMAQ overrule the pci-y above. The colons are
+# therefor correct. This needs a proper fix by distangling the code.
+pci-$(CONFIG_X86_VISWS) := visws.o fixup.o
+pci-$(CONFIG_X86_NUMAQ) := numa.o irq.o
+
+# Necessary for NUMAQ as well
pci-$(CONFIG_NUMA) += mp_bus_to_node.o
obj-y += $(pci-y) common.o early.o
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 1a9c0c6..d95de2f 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -6,45 +6,6 @@
#include <asm/numa.h>
#include "pci.h"
-static int __devinit can_skip_ioresource_align(const struct dmi_system_id *d)
-{
- pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
- printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident);
- return 0;
-}
-
-static struct dmi_system_id acpi_pciprobe_dmi_table[] __devinitdata = {
-/*
- * Systems where PCI IO resource ISA alignment can be skipped
- * when the ISA enable bit in the bridge control is not set
- */
- {
- .callback = can_skip_ioresource_align,
- .ident = "IBM System x3800",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
- DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
- },
- },
- {
- .callback = can_skip_ioresource_align,
- .ident = "IBM System x3850",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
- DMI_MATCH(DMI_PRODUCT_NAME, "x3850"),
- },
- },
- {
- .callback = can_skip_ioresource_align,
- .ident = "IBM System x3950",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
- DMI_MATCH(DMI_PRODUCT_NAME, "x3950"),
- },
- },
- {}
-};
-
struct pci_root_info {
char *name;
unsigned int res_num;
@@ -196,8 +157,6 @@
int pxm;
#endif
- dmi_check_system(acpi_pciprobe_dmi_table);
-
if (domain && !pci_domains_supported) {
printk(KERN_WARNING "PCI: Multiple domains not supported "
"(dom %d, bus %d)\n", domain, busnum);
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 2a4d751..8545c8a 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -77,17 +77,48 @@
*/
DEFINE_SPINLOCK(pci_config_lock);
-static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
+static int __devinit can_skip_ioresource_align(const struct dmi_system_id *d)
{
- struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE];
+ pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
+ printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident);
+ return 0;
+}
- if (rom_r->parent)
- return;
- if (rom_r->start)
- /* we deal with BIOS assigned ROM later */
- return;
- if (!(pci_probe & PCI_ASSIGN_ROMS))
- rom_r->start = rom_r->end = rom_r->flags = 0;
+static struct dmi_system_id can_skip_pciprobe_dmi_table[] __devinitdata = {
+/*
+ * Systems where PCI IO resource ISA alignment can be skipped
+ * when the ISA enable bit in the bridge control is not set
+ */
+ {
+ .callback = can_skip_ioresource_align,
+ .ident = "IBM System x3800",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
+ },
+ },
+ {
+ .callback = can_skip_ioresource_align,
+ .ident = "IBM System x3850",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "x3850"),
+ },
+ },
+ {
+ .callback = can_skip_ioresource_align,
+ .ident = "IBM System x3950",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "x3950"),
+ },
+ },
+ {}
+};
+
+void __init dmi_check_skip_isa_align(void)
+{
+ dmi_check_system(can_skip_pciprobe_dmi_table);
}
/*
@@ -97,11 +128,7 @@
void __devinit pcibios_fixup_bus(struct pci_bus *b)
{
- struct pci_dev *dev;
-
pci_read_bridge_bases(b);
- list_for_each_entry(dev, &b->devices, bus_list)
- pcibios_fixup_device_resources(dev);
}
/*
@@ -318,13 +345,16 @@
{}
};
+void __init dmi_check_pciprobe(void)
+{
+ dmi_check_system(pciprobe_dmi_table);
+}
+
struct pci_bus * __devinit pcibios_scan_root(int busnum)
{
struct pci_bus *bus = NULL;
struct pci_sysdata *sd;
- dmi_check_system(pciprobe_dmi_table);
-
while ((bus = pci_find_next_bus(bus)) != NULL) {
if (bus->number == busnum) {
/* Already scanned */
@@ -462,6 +492,9 @@
} else if (!strcmp(str, "routeirq")) {
pci_routeirq = 1;
return NULL;
+ } else if (!strcmp(str, "skip_isa_align")) {
+ pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
+ return NULL;
}
return str;
}
@@ -489,7 +522,7 @@
pcibios_disable_irq(dev);
}
-struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node)
+struct pci_bus * __devinit pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node)
{
struct pci_bus *bus = NULL;
struct pci_sysdata *sd;
@@ -512,7 +545,7 @@
return bus;
}
-struct pci_bus *pci_scan_bus_with_sysdata(int busno)
+struct pci_bus * __devinit pci_scan_bus_with_sysdata(int busno)
{
return pci_scan_bus_on_node(busno, &pci_root_ops, -1);
}
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index b60b2ab..ff3a6a3 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -502,7 +502,7 @@
*/
static void fam10h_pci_cfg_space_size(struct pci_dev *dev)
{
- dev->cfg_size = pci_cfg_space_size_ext(dev, 0);
+ dev->cfg_size = pci_cfg_space_size_ext(dev);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1200, fam10h_pci_cfg_space_size);
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 8af0f0b..10fb308 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -301,15 +301,13 @@
prot = pgprot_val(vma->vm_page_prot);
if (pat_wc_enabled && write_combine)
prot |= _PAGE_CACHE_WC;
- else if (pat_wc_enabled)
+ else if (pat_wc_enabled || boot_cpu_data.x86 > 3)
/*
* ioremap() and ioremap_nocache() defaults to UC MINUS for now.
* To avoid attribute conflicts, request UC MINUS here
* aswell.
*/
prot |= _PAGE_CACHE_UC_MINUS;
- else if (boot_cpu_data.x86 > 3)
- prot |= _PAGE_CACHE_UC;
vma->vm_page_prot = __pgprot(prot);
diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c
index dd30c60..e70b9c5 100644
--- a/arch/x86/pci/init.c
+++ b/arch/x86/pci/init.c
@@ -33,6 +33,10 @@
printk(KERN_ERR
"PCI: Fatal: No config space access function found\n");
+ dmi_check_pciprobe();
+
+ dmi_check_skip_isa_align();
+
return 0;
}
arch_initcall(pci_access_init);
diff --git a/arch/x86/pci/k8-bus_64.c b/arch/x86/pci/k8-bus_64.c
index ab6d4b1..5c2799c 100644
--- a/arch/x86/pci/k8-bus_64.c
+++ b/arch/x86/pci/k8-bus_64.c
@@ -504,14 +504,6 @@
}
}
-#ifdef CONFIG_NUMA
- for (i = 0; i < BUS_NR; i++) {
- node = mp_bus_to_node[i];
- if (node >= 0)
- printk(KERN_DEBUG "bus: %02x to node: %02x\n", i, node);
- }
-#endif
-
for (i = 0; i < pci_root_num; i++) {
int res_num;
int busnum;
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h
index c58805a..f3972b1 100644
--- a/arch/x86/pci/pci.h
+++ b/arch/x86/pci/pci.h
@@ -38,6 +38,9 @@
pci_dmi_bf,
};
+extern void __init dmi_check_pciprobe(void);
+extern void __init dmi_check_skip_isa_align(void);
+
/* pci-i386.c */
extern unsigned int pcibios_max_latency;
diff --git a/arch/x86/vdso/vdso32-setup.c b/arch/x86/vdso/vdso32-setup.c
index 4dceeb1..cf058fe 100644
--- a/arch/x86/vdso/vdso32-setup.c
+++ b/arch/x86/vdso/vdso32-setup.c
@@ -162,7 +162,7 @@
Elf32_Shdr *shdr;
int i;
- BUG_ON(memcmp(ehdr->e_ident, ELFMAG, 4) != 0 ||
+ BUG_ON(memcmp(ehdr->e_ident, ELFMAG, SELFMAG) != 0 ||
!elf_check_arch_ia32(ehdr) ||
ehdr->e_type != ET_DYN);
diff --git a/arch/x86/video/fbdev.c b/arch/x86/video/fbdev.c
index 4db42bf..6952768 100644
--- a/arch/x86/video/fbdev.c
+++ b/arch/x86/video/fbdev.c
@@ -1,5 +1,4 @@
/*
- *
* Copyright (C) 2007 Antonino Daplas <adaplas@gmail.com>
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -29,3 +28,4 @@
return retval;
}
EXPORT_SYMBOL(fb_is_primary_device);
+MODULE_LICENSE("GPL");
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index 66e5528..a09ead1 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -26,8 +26,7 @@
{
if (ordered & (QUEUE_ORDERED_PREFLUSH | QUEUE_ORDERED_POSTFLUSH) &&
prepare_flush_fn == NULL) {
- printk(KERN_ERR "%s: prepare_flush_fn required\n",
- __FUNCTION__);
+ printk(KERN_ERR "%s: prepare_flush_fn required\n", __func__);
return -EINVAL;
}
diff --git a/block/blk-core.c b/block/blk-core.c
index 5d09f8c..2987fe4 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -54,15 +54,16 @@
static void drive_stat_acct(struct request *rq, int new_io)
{
+ struct hd_struct *part;
int rw = rq_data_dir(rq);
if (!blk_fs_request(rq) || !rq->rq_disk)
return;
- if (!new_io) {
- __all_stat_inc(rq->rq_disk, merges[rw], rq->sector);
- } else {
- struct hd_struct *part = get_part(rq->rq_disk, rq->sector);
+ part = get_part(rq->rq_disk, rq->sector);
+ if (!new_io)
+ __all_stat_inc(rq->rq_disk, part, merges[rw], rq->sector);
+ else {
disk_round_stats(rq->rq_disk);
rq->rq_disk->in_flight++;
if (part) {
@@ -136,7 +137,7 @@
if (unlikely(nbytes > bio->bi_size)) {
printk(KERN_ERR "%s: want %u bytes done, %u left\n",
- __FUNCTION__, nbytes, bio->bi_size);
+ __func__, nbytes, bio->bi_size);
nbytes = bio->bi_size;
}
@@ -253,9 +254,11 @@
**/
void generic_unplug_device(struct request_queue *q)
{
- spin_lock_irq(q->queue_lock);
- __generic_unplug_device(q);
- spin_unlock_irq(q->queue_lock);
+ if (blk_queue_plugged(q)) {
+ spin_lock_irq(q->queue_lock);
+ __generic_unplug_device(q);
+ spin_unlock_irq(q->queue_lock);
+ }
}
EXPORT_SYMBOL(generic_unplug_device);
@@ -1536,10 +1539,11 @@
}
if (blk_fs_request(req) && req->rq_disk) {
+ struct hd_struct *part = get_part(req->rq_disk, req->sector);
const int rw = rq_data_dir(req);
- all_stat_add(req->rq_disk, sectors[rw],
- nr_bytes >> 9, req->sector);
+ all_stat_add(req->rq_disk, part, sectors[rw],
+ nr_bytes >> 9, req->sector);
}
total_bytes = bio_nbytes = 0;
@@ -1566,8 +1570,7 @@
if (unlikely(bio->bi_idx >= bio->bi_vcnt)) {
blk_dump_rq_flags(req, "__end_that");
printk(KERN_ERR "%s: bio idx %d >= vcnt %d\n",
- __FUNCTION__, bio->bi_idx,
- bio->bi_vcnt);
+ __func__, bio->bi_idx, bio->bi_vcnt);
break;
}
@@ -1726,8 +1729,8 @@
const int rw = rq_data_dir(req);
struct hd_struct *part = get_part(disk, req->sector);
- __all_stat_inc(disk, ios[rw], req->sector);
- __all_stat_add(disk, ticks[rw], duration, req->sector);
+ __all_stat_inc(disk, part, ios[rw], req->sector);
+ __all_stat_add(disk, part, ticks[rw], duration, req->sector);
disk_round_stats(disk);
disk->in_flight--;
if (part) {
diff --git a/block/blk-ioc.c b/block/blk-ioc.c
index e34df7c..012f065 100644
--- a/block/blk-ioc.c
+++ b/block/blk-ioc.c
@@ -41,8 +41,8 @@
rcu_read_lock();
if (ioc->aic && ioc->aic->dtor)
ioc->aic->dtor(ioc->aic);
- rcu_read_unlock();
cfq_dtor(ioc);
+ rcu_read_unlock();
kmem_cache_free(iocontext_cachep, ioc);
return 1;
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 73b2356..651136a 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -149,9 +149,9 @@
static int blk_hw_contig_segment(struct request_queue *q, struct bio *bio,
struct bio *nxt)
{
- if (unlikely(!bio_flagged(bio, BIO_SEG_VALID)))
+ if (!bio_flagged(bio, BIO_SEG_VALID))
blk_recount_segments(q, bio);
- if (unlikely(!bio_flagged(nxt, BIO_SEG_VALID)))
+ if (!bio_flagged(nxt, BIO_SEG_VALID))
blk_recount_segments(q, nxt);
if (!BIOVEC_VIRT_MERGEABLE(__BVEC_END(bio), __BVEC_START(nxt)) ||
BIOVEC_VIRT_OVERSIZE(bio->bi_hw_back_size + nxt->bi_hw_front_size))
@@ -312,9 +312,9 @@
q->last_merge = NULL;
return 0;
}
- if (unlikely(!bio_flagged(req->biotail, BIO_SEG_VALID)))
+ if (!bio_flagged(req->biotail, BIO_SEG_VALID))
blk_recount_segments(q, req->biotail);
- if (unlikely(!bio_flagged(bio, BIO_SEG_VALID)))
+ if (!bio_flagged(bio, BIO_SEG_VALID))
blk_recount_segments(q, bio);
len = req->biotail->bi_hw_back_size + bio->bi_hw_front_size;
if (BIOVEC_VIRT_MERGEABLE(__BVEC_END(req->biotail), __BVEC_START(bio))
@@ -352,9 +352,9 @@
return 0;
}
len = bio->bi_hw_back_size + req->bio->bi_hw_front_size;
- if (unlikely(!bio_flagged(bio, BIO_SEG_VALID)))
+ if (!bio_flagged(bio, BIO_SEG_VALID))
blk_recount_segments(q, bio);
- if (unlikely(!bio_flagged(req->bio, BIO_SEG_VALID)))
+ if (!bio_flagged(req->bio, BIO_SEG_VALID))
blk_recount_segments(q, req->bio);
if (BIOVEC_VIRT_MERGEABLE(__BVEC_END(bio), __BVEC_START(req->bio)) &&
!BIOVEC_VIRT_OVERSIZE(len)) {
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 6089384..bb93d4c 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -168,8 +168,8 @@
{
if ((max_sectors << 9) < PAGE_CACHE_SIZE) {
max_sectors = 1 << (PAGE_CACHE_SHIFT - 9);
- printk(KERN_INFO "%s: set to minimum %d\n", __FUNCTION__,
- max_sectors);
+ printk(KERN_INFO "%s: set to minimum %d\n",
+ __func__, max_sectors);
}
if (BLK_DEF_MAX_SECTORS > max_sectors)
@@ -196,8 +196,8 @@
{
if (!max_segments) {
max_segments = 1;
- printk(KERN_INFO "%s: set to minimum %d\n", __FUNCTION__,
- max_segments);
+ printk(KERN_INFO "%s: set to minimum %d\n",
+ __func__, max_segments);
}
q->max_phys_segments = max_segments;
@@ -220,8 +220,8 @@
{
if (!max_segments) {
max_segments = 1;
- printk(KERN_INFO "%s: set to minimum %d\n", __FUNCTION__,
- max_segments);
+ printk(KERN_INFO "%s: set to minimum %d\n",
+ __func__, max_segments);
}
q->max_hw_segments = max_segments;
@@ -241,8 +241,8 @@
{
if (max_size < PAGE_CACHE_SIZE) {
max_size = PAGE_CACHE_SIZE;
- printk(KERN_INFO "%s: set to minimum %d\n", __FUNCTION__,
- max_size);
+ printk(KERN_INFO "%s: set to minimum %d\n",
+ __func__, max_size);
}
q->max_segment_size = max_size;
@@ -357,8 +357,8 @@
{
if (mask < PAGE_CACHE_SIZE - 1) {
mask = PAGE_CACHE_SIZE - 1;
- printk(KERN_INFO "%s: set to minimum %lx\n", __FUNCTION__,
- mask);
+ printk(KERN_INFO "%s: set to minimum %lx\n",
+ __func__, mask);
}
q->seg_boundary_mask = mask;
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index e85c401..304ec73a 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -146,11 +146,13 @@
unsigned long nm;
ssize_t ret = queue_var_store(&nm, page, count);
+ spin_lock_irq(q->queue_lock);
if (nm)
- set_bit(QUEUE_FLAG_NOMERGES, &q->queue_flags);
+ queue_flag_set(QUEUE_FLAG_NOMERGES, q);
else
- clear_bit(QUEUE_FLAG_NOMERGES, &q->queue_flags);
+ queue_flag_clear(QUEUE_FLAG_NOMERGES, q);
+ spin_unlock_irq(q->queue_lock);
return ret;
}
diff --git a/block/blk-tag.c b/block/blk-tag.c
index e176ddb..32667be 100644
--- a/block/blk-tag.c
+++ b/block/blk-tag.c
@@ -70,7 +70,7 @@
__blk_free_tags(bqt);
q->queue_tags = NULL;
- queue_flag_clear(QUEUE_FLAG_QUEUED, q);
+ queue_flag_clear_unlocked(QUEUE_FLAG_QUEUED, q);
}
/**
@@ -98,7 +98,7 @@
**/
void blk_queue_free_tags(struct request_queue *q)
{
- queue_flag_clear(QUEUE_FLAG_QUEUED, q);
+ queue_flag_clear_unlocked(QUEUE_FLAG_QUEUED, q);
}
EXPORT_SYMBOL(blk_queue_free_tags);
@@ -112,7 +112,7 @@
if (q && depth > q->nr_requests * 2) {
depth = q->nr_requests * 2;
printk(KERN_ERR "%s: adjusted depth to %d\n",
- __FUNCTION__, depth);
+ __func__, depth);
}
tag_index = kzalloc(depth * sizeof(struct request *), GFP_ATOMIC);
@@ -171,6 +171,9 @@
* @q: the request queue for the device
* @depth: the maximum queue depth supported
* @tags: the tag to use
+ *
+ * Queue lock must be held here if the function is called to resize an
+ * existing map.
**/
int blk_queue_init_tags(struct request_queue *q, int depth,
struct blk_queue_tag *tags)
@@ -197,7 +200,7 @@
* assign it, all done
*/
q->queue_tags = tags;
- queue_flag_set(QUEUE_FLAG_QUEUED, q);
+ queue_flag_set_unlocked(QUEUE_FLAG_QUEUED, q);
INIT_LIST_HEAD(&q->tag_busy_list);
return 0;
fail:
@@ -296,13 +299,13 @@
if (unlikely(bqt->tag_index[tag] == NULL))
printk(KERN_ERR "%s: tag %d is missing\n",
- __FUNCTION__, tag);
+ __func__, tag);
bqt->tag_index[tag] = NULL;
if (unlikely(!test_bit(tag, bqt->tag_map))) {
printk(KERN_ERR "%s: attempt to clear non-busy tag (%d)\n",
- __FUNCTION__, tag);
+ __func__, tag);
return;
}
/*
@@ -340,7 +343,7 @@
if (unlikely((rq->cmd_flags & REQ_QUEUED))) {
printk(KERN_ERR
"%s: request %p for device [%s] already tagged %d",
- __FUNCTION__, rq,
+ __func__, rq,
rq->rq_disk ? rq->rq_disk->disk_name : "?", rq->tag);
BUG();
}
diff --git a/block/blktrace.c b/block/blktrace.c
index 568588c..b2cbb4e 100644
--- a/block/blktrace.c
+++ b/block/blktrace.c
@@ -476,7 +476,7 @@
switch (cmd) {
case BLKTRACESETUP:
- strcpy(b, bdevname(bdev, b));
+ bdevname(bdev, b);
ret = blk_trace_setup(q, b, bdev->bd_dev, arg);
break;
case BLKTRACESTART:
diff --git a/block/bsg.c b/block/bsg.c
index 23ea4fd..f0b7cd3 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -57,7 +57,7 @@
#undef BSG_DEBUG
#ifdef BSG_DEBUG
-#define dprintk(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ##args)
+#define dprintk(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ##args)
#else
#define dprintk(fmt, args...)
#endif
@@ -174,7 +174,11 @@
static int blk_fill_sgv4_hdr_rq(struct request_queue *q, struct request *rq,
struct sg_io_v4 *hdr, int has_write_perm)
{
- memset(rq->cmd, 0, BLK_MAX_CDB); /* ATAPI hates garbage after CDB */
+ if (hdr->request_len > BLK_MAX_CDB) {
+ rq->cmd = kzalloc(hdr->request_len, GFP_KERNEL);
+ if (!rq->cmd)
+ return -ENOMEM;
+ }
if (copy_from_user(rq->cmd, (void *)(unsigned long)hdr->request,
hdr->request_len))
@@ -211,8 +215,6 @@
if (hdr->guard != 'Q')
return -EINVAL;
- if (hdr->request_len > BLK_MAX_CDB)
- return -EINVAL;
if (hdr->dout_xfer_len > (q->max_sectors << 9) ||
hdr->din_xfer_len > (q->max_sectors << 9))
return -EIO;
@@ -302,6 +304,8 @@
}
return rq;
out:
+ if (rq->cmd != rq->__cmd)
+ kfree(rq->cmd);
blk_put_request(rq);
if (next_rq) {
blk_rq_unmap_user(next_rq->bio);
@@ -455,6 +459,8 @@
ret = rq->errors;
blk_rq_unmap_user(bio);
+ if (rq->cmd != rq->__cmd)
+ kfree(rq->cmd);
blk_put_request(rq);
return ret;
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index f4e1006..b399c62 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -1142,6 +1142,17 @@
kmem_cache_free(cfq_pool, cfqq);
}
+static void
+__call_for_each_cic(struct io_context *ioc,
+ void (*func)(struct io_context *, struct cfq_io_context *))
+{
+ struct cfq_io_context *cic;
+ struct hlist_node *n;
+
+ hlist_for_each_entry_rcu(cic, n, &ioc->cic_list, cic_list)
+ func(ioc, cic);
+}
+
/*
* Call func for each cic attached to this ioc.
*/
@@ -1149,12 +1160,8 @@
call_for_each_cic(struct io_context *ioc,
void (*func)(struct io_context *, struct cfq_io_context *))
{
- struct cfq_io_context *cic;
- struct hlist_node *n;
-
rcu_read_lock();
- hlist_for_each_entry_rcu(cic, n, &ioc->cic_list, cic_list)
- func(ioc, cic);
+ __call_for_each_cic(ioc, func);
rcu_read_unlock();
}
@@ -1198,7 +1205,7 @@
* should be ok to iterate over the known list, we will see all cic's
* since no new ones are added.
*/
- call_for_each_cic(ioc, cic_free_func);
+ __call_for_each_cic(ioc, cic_free_func);
}
static void cfq_exit_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq)
@@ -1296,10 +1303,10 @@
printk(KERN_ERR "cfq: bad prio %x\n", ioprio_class);
case IOPRIO_CLASS_NONE:
/*
- * no prio set, place us in the middle of the BE classes
+ * no prio set, inherit CPU scheduling settings
*/
cfqq->ioprio = task_nice_ioprio(tsk);
- cfqq->ioprio_class = IOPRIO_CLASS_BE;
+ cfqq->ioprio_class = task_nice_ioclass(tsk);
break;
case IOPRIO_CLASS_RT:
cfqq->ioprio = task_ioprio(ioc);
diff --git a/block/compat_ioctl.c b/block/compat_ioctl.c
index c70d0b6..c23177e 100644
--- a/block/compat_ioctl.c
+++ b/block/compat_ioctl.c
@@ -555,7 +555,7 @@
if (copy_from_user(&cbuts, arg, sizeof(cbuts)))
return -EFAULT;
- strcpy(b, bdevname(bdev, b));
+ bdevname(bdev, b);
buts = (struct blk_user_trace_setup) {
.act_mask = cbuts.act_mask,
diff --git a/block/elevator.c b/block/elevator.c
index ac5310e..980f8ae 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -650,7 +650,7 @@
default:
printk(KERN_ERR "%s: bad insertion point %d\n",
- __FUNCTION__, where);
+ __func__, where);
BUG();
}
@@ -808,8 +808,7 @@
rq->cmd_flags |= REQ_QUIET;
end_queued_request(rq, 0);
} else {
- printk(KERN_ERR "%s: bad return=%d\n", __FUNCTION__,
- ret);
+ printk(KERN_ERR "%s: bad return=%d\n", __func__, ret);
break;
}
}
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index ffa3720..78199c0 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -33,13 +33,12 @@
#include <scsi/scsi_cmnd.h>
/* Command group 3 is reserved and should never be used. */
-const unsigned char scsi_command_size[8] =
+const unsigned char scsi_command_size_tbl[8] =
{
6, 10, 10, 12,
16, 12, 10, 10
};
-
-EXPORT_SYMBOL(scsi_command_size);
+EXPORT_SYMBOL(scsi_command_size_tbl);
#include <scsi/sg.h>
diff --git a/crypto/authenc.c b/crypto/authenc.c
index ed8ac5a..4b22676 100644
--- a/crypto/authenc.c
+++ b/crypto/authenc.c
@@ -217,9 +217,10 @@
int err)
{
if (!err) {
- struct aead_givcrypt_request *greq = req->data;
+ struct aead_request *areq = req->data;
+ struct skcipher_givcrypt_request *greq = aead_request_ctx(areq);
- err = crypto_authenc_genicv(&greq->areq, greq->giv, 0);
+ err = crypto_authenc_genicv(areq, greq->giv, 0);
}
aead_request_complete(req->data, err);
diff --git a/crypto/cryptd.c b/crypto/cryptd.c
index 2504252..b150de5 100644
--- a/crypto/cryptd.c
+++ b/crypto/cryptd.c
@@ -190,8 +190,10 @@
int err;
inst = kzalloc(sizeof(*inst) + sizeof(*ctx), GFP_KERNEL);
- if (IS_ERR(inst))
+ if (!inst) {
+ inst = ERR_PTR(-ENOMEM);
goto out;
+ }
err = -ENAMETOOLONG;
if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME,
diff --git a/crypto/eseqiv.c b/crypto/eseqiv.c
index b14f14e..881d309 100644
--- a/crypto/eseqiv.c
+++ b/crypto/eseqiv.c
@@ -136,7 +136,8 @@
}
ablkcipher_request_set_crypt(subreq, reqctx->src, dst,
- req->creq.nbytes, req->creq.info);
+ req->creq.nbytes + ivsize,
+ req->creq.info);
memcpy(req->creq.info, ctx->salt, ivsize);
diff --git a/crypto/hmac.c b/crypto/hmac.c
index b60c3c7..14c6351 100644
--- a/crypto/hmac.c
+++ b/crypto/hmac.c
@@ -57,14 +57,35 @@
if (keylen > bs) {
struct hash_desc desc;
struct scatterlist tmp;
+ int tmplen;
int err;
desc.tfm = tfm;
desc.flags = crypto_hash_get_flags(parent);
desc.flags &= CRYPTO_TFM_REQ_MAY_SLEEP;
- sg_init_one(&tmp, inkey, keylen);
- err = crypto_hash_digest(&desc, &tmp, keylen, digest);
+ err = crypto_hash_init(&desc);
+ if (err)
+ return err;
+
+ tmplen = bs * 2 + ds;
+ sg_init_one(&tmp, ipad, tmplen);
+
+ for (; keylen > tmplen; inkey += tmplen, keylen -= tmplen) {
+ memcpy(ipad, inkey, tmplen);
+ err = crypto_hash_update(&desc, &tmp, tmplen);
+ if (err)
+ return err;
+ }
+
+ if (keylen) {
+ memcpy(ipad, inkey, keylen);
+ err = crypto_hash_update(&desc, &tmp, keylen);
+ if (err)
+ return err;
+ }
+
+ err = crypto_hash_final(&desc, digest);
if (err)
return err;
diff --git a/drivers/accessibility/Kconfig b/drivers/accessibility/Kconfig
index 1264c4b..ef3b65b 100644
--- a/drivers/accessibility/Kconfig
+++ b/drivers/accessibility/Kconfig
@@ -1,7 +1,17 @@
menuconfig ACCESSIBILITY
bool "Accessibility support"
---help---
- Enable a submenu where accessibility items may be enabled.
+ Accessibility handles all special kinds of hardware devices or
+ software adapters which help people with disabilities (e.g.
+ blindness) to use computers.
+
+ That includes braille devices, speech synthesis, keyboard
+ remapping, etc.
+
+ Say Y here to get to see options for accessibility.
+ This option alone does not add any kernel code.
+
+ If you say N, all options in this submenu will be skipped and disabled.
If unsure, say N.
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 1c11df9..9bf2986 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -205,8 +205,8 @@
If unsure, say N.
config SATA_INIC162X
- tristate "Initio 162x SATA support (HIGHLY EXPERIMENTAL)"
- depends on PCI && EXPERIMENTAL
+ tristate "Initio 162x SATA support"
+ depends on PCI
help
This option enables support for Initio 162x Serial ATA.
@@ -697,6 +697,15 @@
If unsure, say N.
+config PATA_SCH
+ tristate "Intel SCH PATA support"
+ depends on PCI
+ help
+ This option enables support for Intel SCH PATA on the Intel
+ SCH (US15W, US15L, UL11L) series host controllers.
+
+ If unsure, say N.
+
config PATA_BF54X
tristate "Blackfin 54x ATAPI support"
depends on BF542 || BF548 || BF549
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index b693d82..674965f 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -67,6 +67,7 @@
obj-$(CONFIG_PATA_TRIFLEX) += pata_triflex.o
obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o
obj-$(CONFIG_PATA_SCC) += pata_scc.o
+obj-$(CONFIG_PATA_SCH) += pata_sch.o
obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 8cace9a..97f83fb 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1267,9 +1267,7 @@
void __iomem *port_mmio = ahci_port_base(link->ap);
u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
- if (!(status & ATA_BUSY))
- return 1;
- return 0;
+ return ata_check_ready(status);
}
static int ahci_softreset(struct ata_link *link, unsigned int *class,
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 47aeccd..75a406f 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -152,6 +152,12 @@
if (dev->vendor == PCI_VENDOR_ID_AL)
ata_pci_bmdma_clear_simplex(dev);
+ if (dev->vendor == PCI_VENDOR_ID_ATI) {
+ int rc = pcim_enable_device(dev);
+ if (rc < 0)
+ return rc;
+ pcim_pin_device(dev);
+ }
return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL);
}
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index ea2c764..a9027b8 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1348,6 +1348,8 @@
{
struct pci_dev *pdev = to_pci_dev(host->dev);
struct piix_host_priv *hpriv = host->private_data;
+ struct ata_device *dev0 = &host->ports[0]->link.device[0];
+ u32 scontrol;
int i;
/* check for availability */
@@ -1366,6 +1368,29 @@
return;
hpriv->sidpr = pcim_iomap_table(pdev)[PIIX_SIDPR_BAR];
+
+ /* SCR access via SIDPR doesn't work on some configurations.
+ * Give it a test drive by inhibiting power save modes which
+ * we'll do anyway.
+ */
+ scontrol = piix_sidpr_read(dev0, SCR_CONTROL);
+
+ /* if IPM is already 3, SCR access is probably working. Don't
+ * un-inhibit power save modes as BIOS might have inhibited
+ * them for a reason.
+ */
+ if ((scontrol & 0xf00) != 0x300) {
+ scontrol |= 0x300;
+ piix_sidpr_write(dev0, SCR_CONTROL, scontrol);
+ scontrol = piix_sidpr_read(dev0, SCR_CONTROL);
+
+ if ((scontrol & 0xf00) != 0x300) {
+ dev_printk(KERN_INFO, host->dev, "SCR access via "
+ "SIDPR is available but doesn't work\n");
+ return;
+ }
+ }
+
host->ports[0]->ops = &piix_sidpr_sata_ops;
host->ports[1]->ops = &piix_sidpr_sata_ops;
}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 3bc4885..927b692 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -6292,6 +6292,7 @@
EXPORT_SYMBOL_GPL(ata_eh_thaw_port);
EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
+EXPORT_SYMBOL_GPL(ata_eh_analyze_ncq_error);
EXPORT_SYMBOL_GPL(ata_do_eh);
EXPORT_SYMBOL_GPL(ata_std_error_handler);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 61dcd00..62e0331 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1357,7 +1357,7 @@
* LOCKING:
* Kernel thread context (may sleep).
*/
-static void ata_eh_analyze_ncq_error(struct ata_link *link)
+void ata_eh_analyze_ncq_error(struct ata_link *link)
{
struct ata_port *ap = link->ap;
struct ata_eh_context *ehc = &link->eh_context;
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 2ec65a8..3c2d228 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -314,11 +314,7 @@
{
u8 status = link->ap->ops->sff_check_status(link->ap);
- if (!(status & ATA_BUSY))
- return 1;
- if (status == 0xff)
- return -ENODEV;
- return 0;
+ return ata_check_ready(status);
}
/**
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index c5f91e6..fbe6057 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -259,6 +259,12 @@
.port_ops = &pacpi_ops,
};
const struct ata_port_info *ppi[] = { &info, NULL };
+ if (pdev->vendor == PCI_VENDOR_ID_ATI) {
+ int rc = pcim_enable_device(pdev);
+ if (rc < 0)
+ return rc;
+ pcim_pin_device(pdev);
+ }
return ata_pci_sff_init_one(pdev, ppi, &pacpi_sht, NULL);
}
diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c
new file mode 100644
index 0000000..c8cc027
--- /dev/null
+++ b/drivers/ata/pata_sch.c
@@ -0,0 +1,206 @@
+/*
+ * pata_sch.c - Intel SCH PATA controllers
+ *
+ * Copyright (c) 2008 Alek Du <alek.du@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/*
+ * Supports:
+ * Intel SCH (AF82US15W, AF82US15L, AF82UL11L) chipsets -- see spec at:
+ * http://download.intel.com/design/chipsets/embedded/datashts/319537.pdf
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/dmi.h>
+
+#define DRV_NAME "pata_sch"
+#define DRV_VERSION "0.2"
+
+/* see SCH datasheet page 351 */
+enum {
+ D0TIM = 0x80, /* Device 0 Timing Register */
+ D1TIM = 0x84, /* Device 1 Timing Register */
+ PM = 0x07, /* PIO Mode Bit Mask */
+ MDM = (0x03 << 8), /* Multi-word DMA Mode Bit Mask */
+ UDM = (0x07 << 16), /* Ultra DMA Mode Bit Mask */
+ PPE = (1 << 30), /* Prefetch/Post Enable */
+ USD = (1 << 31), /* Use Synchronous DMA */
+};
+
+static int sch_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent);
+static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev);
+static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev);
+
+static const struct pci_device_id sch_pci_tbl[] = {
+ /* Intel SCH PATA Controller */
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SCH_IDE), 0 },
+ { } /* terminate list */
+};
+
+static struct pci_driver sch_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = sch_pci_tbl,
+ .probe = sch_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
+#endif
+};
+
+static struct scsi_host_template sch_sht = {
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations sch_pata_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = ata_cable_unknown,
+ .set_piomode = sch_set_piomode,
+ .set_dmamode = sch_set_dmamode,
+};
+
+static struct ata_port_info sch_port_info = {
+ .flags = 0,
+ .pio_mask = ATA_PIO4, /* pio0-4 */
+ .mwdma_mask = ATA_MWDMA2, /* mwdma0-2 */
+ .udma_mask = ATA_UDMA5, /* udma0-5 */
+ .port_ops = &sch_pata_ops,
+};
+
+MODULE_AUTHOR("Alek Du <alek.du@intel.com>");
+MODULE_DESCRIPTION("SCSI low-level driver for Intel SCH PATA controllers");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, sch_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
+/**
+ * sch_set_piomode - Initialize host controller PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: ATA device
+ *
+ * Set PIO mode for device, in host controller PCI config space.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ unsigned int pio = adev->pio_mode - XFER_PIO_0;
+ struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ unsigned int port = adev->devno ? D1TIM : D0TIM;
+ unsigned int data;
+
+ pci_read_config_dword(dev, port, &data);
+ /* see SCH datasheet page 351 */
+ /* set PIO mode */
+ data &= ~(PM | PPE);
+ data |= pio;
+ /* enable PPE for block device */
+ if (adev->class == ATA_DEV_ATA)
+ data |= PPE;
+ pci_write_config_dword(dev, port, data);
+}
+
+/**
+ * sch_set_dmamode - Initialize host controller PATA DMA timings
+ * @ap: Port whose timings we are configuring
+ * @adev: ATA device
+ *
+ * Set MW/UDMA mode for device, in host controller PCI config space.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ unsigned int dma_mode = adev->dma_mode;
+ struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ unsigned int port = adev->devno ? D1TIM : D0TIM;
+ unsigned int data;
+
+ pci_read_config_dword(dev, port, &data);
+ /* see SCH datasheet page 351 */
+ if (dma_mode >= XFER_UDMA_0) {
+ /* enable Synchronous DMA mode */
+ data |= USD;
+ data &= ~UDM;
+ data |= (dma_mode - XFER_UDMA_0) << 16;
+ } else { /* must be MWDMA mode, since we masked SWDMA already */
+ data &= ~(USD | MDM);
+ data |= (dma_mode - XFER_MW_DMA_0) << 8;
+ }
+ pci_write_config_dword(dev, port, data);
+}
+
+/**
+ * sch_init_one - Register SCH ATA PCI device with kernel services
+ * @pdev: PCI device to register
+ * @ent: Entry in sch_pci_tbl matching with @pdev
+ *
+ * LOCKING:
+ * Inherited from PCI layer (may sleep).
+ *
+ * RETURNS:
+ * Zero on success, or -ERRNO value.
+ */
+
+static int __devinit sch_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ static int printed_version;
+ const struct ata_port_info *ppi[] = { &sch_port_info, NULL };
+ struct ata_host *host;
+ int rc;
+
+ if (!printed_version++)
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "version " DRV_VERSION "\n");
+
+ /* enable device and prepare host */
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+ rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+ if (rc)
+ return rc;
+ pci_set_master(pdev);
+ return ata_pci_sff_activate_host(host, ata_sff_interrupt, &sch_sht);
+}
+
+static int __init sch_init(void)
+{
+ return pci_register_driver(&sch_pci_driver);
+}
+
+static void __exit sch_exit(void)
+{
+ pci_unregister_driver(&sch_pci_driver);
+}
+
+module_init(sch_init);
+module_exit(sch_exit);
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index d27bb9a..3ead02f 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -10,13 +10,33 @@
* right. Documentation is available at initio's website but it only
* documents registers (not programming model).
*
- * - ATA disks work.
- * - Hotplug works.
- * - ATAPI read works but burning doesn't. This thing is really
- * peculiar about ATAPI and I couldn't figure out how ATAPI PIO and
- * ATAPI DMA WRITE should be programmed. If you've got a clue, be
- * my guest.
- * - Both STR and STD work.
+ * This driver has interesting history. The first version was written
+ * from the documentation and a 2.4 IDE driver posted on a Taiwan
+ * company, which didn't use any IDMA features and couldn't handle
+ * LBA48. The resulting driver couldn't handle LBA48 devices either
+ * making it pretty useless.
+ *
+ * After a while, initio picked the driver up, renamed it to
+ * sata_initio162x, updated it to use IDMA for ATA DMA commands and
+ * posted it on their website. It only used ATA_PROT_DMA for IDMA and
+ * attaching both devices and issuing IDMA and !IDMA commands
+ * simultaneously broke it due to PIRQ masking interaction but it did
+ * show how to use the IDMA (ADMA + some initio specific twists)
+ * engine.
+ *
+ * Then, I picked up their changes again and here's the usable driver
+ * which uses IDMA for everything. Everything works now including
+ * LBA48, CD/DVD burning, suspend/resume and hotplug. There are some
+ * issues tho. Result Tf is not resported properly, NCQ isn't
+ * supported yet and CD/DVD writing works with DMA assisted PIO
+ * protocol (which, for native SATA devices, shouldn't cause any
+ * noticeable difference).
+ *
+ * Anyways, so, here's finally a working driver for inic162x. Enjoy!
+ *
+ * initio: If you guys wanna improve the driver regarding result TF
+ * access and other stuff, please feel free to contact me. I'll be
+ * happy to assist.
*/
#include <linux/kernel.h>
@@ -28,13 +48,19 @@
#include <scsi/scsi_device.h>
#define DRV_NAME "sata_inic162x"
-#define DRV_VERSION "0.3"
+#define DRV_VERSION "0.4"
enum {
- MMIO_BAR = 5,
+ MMIO_BAR_PCI = 5,
+ MMIO_BAR_CARDBUS = 1,
NR_PORTS = 2,
+ IDMA_CPB_TBL_SIZE = 4 * 32,
+
+ INIC_DMA_BOUNDARY = 0xffffff,
+
+ HOST_ACTRL = 0x08,
HOST_CTL = 0x7c,
HOST_STAT = 0x7e,
HOST_IRQ_STAT = 0xbc,
@@ -43,22 +69,37 @@
PORT_SIZE = 0x40,
/* registers for ATA TF operation */
- PORT_TF = 0x00,
- PORT_ALT_STAT = 0x08,
+ PORT_TF_DATA = 0x00,
+ PORT_TF_FEATURE = 0x01,
+ PORT_TF_NSECT = 0x02,
+ PORT_TF_LBAL = 0x03,
+ PORT_TF_LBAM = 0x04,
+ PORT_TF_LBAH = 0x05,
+ PORT_TF_DEVICE = 0x06,
+ PORT_TF_COMMAND = 0x07,
+ PORT_TF_ALT_STAT = 0x08,
PORT_IRQ_STAT = 0x09,
PORT_IRQ_MASK = 0x0a,
PORT_PRD_CTL = 0x0b,
PORT_PRD_ADDR = 0x0c,
PORT_PRD_XFERLEN = 0x10,
+ PORT_CPB_CPBLAR = 0x18,
+ PORT_CPB_PTQFIFO = 0x1c,
/* IDMA register */
PORT_IDMA_CTL = 0x14,
+ PORT_IDMA_STAT = 0x16,
+
+ PORT_RPQ_FIFO = 0x1e,
+ PORT_RPQ_CNT = 0x1f,
PORT_SCR = 0x20,
/* HOST_CTL bits */
HCTL_IRQOFF = (1 << 8), /* global IRQ off */
- HCTL_PWRDWN = (1 << 13), /* power down PHYs */
+ HCTL_FTHD0 = (1 << 10), /* fifo threshold 0 */
+ HCTL_FTHD1 = (1 << 11), /* fifo threshold 1*/
+ HCTL_PWRDWN = (1 << 12), /* power down PHYs */
HCTL_SOFTRST = (1 << 13), /* global reset (no phy reset) */
HCTL_RPGSEL = (1 << 15), /* register page select */
@@ -81,9 +122,7 @@
PIRQ_PENDING = (1 << 7), /* port IRQ pending (STAT only) */
PIRQ_ERR = PIRQ_OFFLINE | PIRQ_ONLINE | PIRQ_FATAL,
-
- PIRQ_MASK_DMA_READ = PIRQ_REPLY | PIRQ_ATA,
- PIRQ_MASK_OTHER = PIRQ_REPLY | PIRQ_COMPLETE,
+ PIRQ_MASK_DEFAULT = PIRQ_REPLY | PIRQ_ATA,
PIRQ_MASK_FREEZE = 0xff,
/* PORT_PRD_CTL bits */
@@ -96,20 +135,104 @@
IDMA_CTL_RST_IDMA = (1 << 5), /* reset IDMA machinary */
IDMA_CTL_GO = (1 << 7), /* IDMA mode go */
IDMA_CTL_ATA_NIEN = (1 << 8), /* ATA IRQ disable */
+
+ /* PORT_IDMA_STAT bits */
+ IDMA_STAT_PERR = (1 << 0), /* PCI ERROR MODE */
+ IDMA_STAT_CPBERR = (1 << 1), /* ADMA CPB error */
+ IDMA_STAT_LGCY = (1 << 3), /* ADMA legacy */
+ IDMA_STAT_UIRQ = (1 << 4), /* ADMA unsolicited irq */
+ IDMA_STAT_STPD = (1 << 5), /* ADMA stopped */
+ IDMA_STAT_PSD = (1 << 6), /* ADMA pause */
+ IDMA_STAT_DONE = (1 << 7), /* ADMA done */
+
+ IDMA_STAT_ERR = IDMA_STAT_PERR | IDMA_STAT_CPBERR,
+
+ /* CPB Control Flags*/
+ CPB_CTL_VALID = (1 << 0), /* CPB valid */
+ CPB_CTL_QUEUED = (1 << 1), /* queued command */
+ CPB_CTL_DATA = (1 << 2), /* data, rsvd in datasheet */
+ CPB_CTL_IEN = (1 << 3), /* PCI interrupt enable */
+ CPB_CTL_DEVDIR = (1 << 4), /* device direction control */
+
+ /* CPB Response Flags */
+ CPB_RESP_DONE = (1 << 0), /* ATA command complete */
+ CPB_RESP_REL = (1 << 1), /* ATA release */
+ CPB_RESP_IGNORED = (1 << 2), /* CPB ignored */
+ CPB_RESP_ATA_ERR = (1 << 3), /* ATA command error */
+ CPB_RESP_SPURIOUS = (1 << 4), /* ATA spurious interrupt error */
+ CPB_RESP_UNDERFLOW = (1 << 5), /* APRD deficiency length error */
+ CPB_RESP_OVERFLOW = (1 << 6), /* APRD exccess length error */
+ CPB_RESP_CPB_ERR = (1 << 7), /* CPB error flag */
+
+ /* PRD Control Flags */
+ PRD_DRAIN = (1 << 1), /* ignore data excess */
+ PRD_CDB = (1 << 2), /* atapi packet command pointer */
+ PRD_DIRECT_INTR = (1 << 3), /* direct interrupt */
+ PRD_DMA = (1 << 4), /* data transfer method */
+ PRD_WRITE = (1 << 5), /* data dir, rsvd in datasheet */
+ PRD_IOM = (1 << 6), /* io/memory transfer */
+ PRD_END = (1 << 7), /* APRD chain end */
};
+/* Comman Parameter Block */
+struct inic_cpb {
+ u8 resp_flags; /* Response Flags */
+ u8 error; /* ATA Error */
+ u8 status; /* ATA Status */
+ u8 ctl_flags; /* Control Flags */
+ __le32 len; /* Total Transfer Length */
+ __le32 prd; /* First PRD pointer */
+ u8 rsvd[4];
+ /* 16 bytes */
+ u8 feature; /* ATA Feature */
+ u8 hob_feature; /* ATA Ex. Feature */
+ u8 device; /* ATA Device/Head */
+ u8 mirctl; /* Mirror Control */
+ u8 nsect; /* ATA Sector Count */
+ u8 hob_nsect; /* ATA Ex. Sector Count */
+ u8 lbal; /* ATA Sector Number */
+ u8 hob_lbal; /* ATA Ex. Sector Number */
+ u8 lbam; /* ATA Cylinder Low */
+ u8 hob_lbam; /* ATA Ex. Cylinder Low */
+ u8 lbah; /* ATA Cylinder High */
+ u8 hob_lbah; /* ATA Ex. Cylinder High */
+ u8 command; /* ATA Command */
+ u8 ctl; /* ATA Control */
+ u8 slave_error; /* Slave ATA Error */
+ u8 slave_status; /* Slave ATA Status */
+ /* 32 bytes */
+} __packed;
+
+/* Physical Region Descriptor */
+struct inic_prd {
+ __le32 mad; /* Physical Memory Address */
+ __le16 len; /* Transfer Length */
+ u8 rsvd;
+ u8 flags; /* Control Flags */
+} __packed;
+
+struct inic_pkt {
+ struct inic_cpb cpb;
+ struct inic_prd prd[LIBATA_MAX_PRD + 1]; /* + 1 for cdb */
+ u8 cdb[ATAPI_CDB_LEN];
+} __packed;
+
struct inic_host_priv {
- u16 cached_hctl;
+ void __iomem *mmio_base;
+ u16 cached_hctl;
};
struct inic_port_priv {
- u8 dfl_prdctl;
- u8 cached_prdctl;
- u8 cached_pirq_mask;
+ struct inic_pkt *pkt;
+ dma_addr_t pkt_dma;
+ u32 *cpb_tbl;
+ dma_addr_t cpb_tbl_dma;
};
static struct scsi_host_template inic_sht = {
- ATA_BMDMA_SHT(DRV_NAME),
+ ATA_BASE_SHT(DRV_NAME),
+ .sg_tablesize = LIBATA_MAX_PRD, /* maybe it can be larger? */
+ .dma_boundary = INIC_DMA_BOUNDARY,
};
static const int scr_map[] = {
@@ -120,54 +243,34 @@
static void __iomem *inic_port_base(struct ata_port *ap)
{
- return ap->host->iomap[MMIO_BAR] + ap->port_no * PORT_SIZE;
-}
+ struct inic_host_priv *hpriv = ap->host->private_data;
-static void __inic_set_pirq_mask(struct ata_port *ap, u8 mask)
-{
- void __iomem *port_base = inic_port_base(ap);
- struct inic_port_priv *pp = ap->private_data;
-
- writeb(mask, port_base + PORT_IRQ_MASK);
- pp->cached_pirq_mask = mask;
-}
-
-static void inic_set_pirq_mask(struct ata_port *ap, u8 mask)
-{
- struct inic_port_priv *pp = ap->private_data;
-
- if (pp->cached_pirq_mask != mask)
- __inic_set_pirq_mask(ap, mask);
+ return hpriv->mmio_base + ap->port_no * PORT_SIZE;
}
static void inic_reset_port(void __iomem *port_base)
{
void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
- u16 ctl;
- ctl = readw(idma_ctl);
- ctl &= ~(IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN | IDMA_CTL_GO);
+ /* stop IDMA engine */
+ readw(idma_ctl); /* flush */
+ msleep(1);
/* mask IRQ and assert reset */
- writew(ctl | IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN, idma_ctl);
+ writew(IDMA_CTL_RST_IDMA, idma_ctl);
readw(idma_ctl); /* flush */
-
- /* give it some time */
msleep(1);
/* release reset */
- writew(ctl | IDMA_CTL_ATA_NIEN, idma_ctl);
+ writew(0, idma_ctl);
/* clear irq */
writeb(0xff, port_base + PORT_IRQ_STAT);
-
- /* reenable ATA IRQ, turn off IDMA mode */
- writew(ctl, idma_ctl);
}
static int inic_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val)
{
- void __iomem *scr_addr = ap->ioaddr.scr_addr;
+ void __iomem *scr_addr = inic_port_base(ap) + PORT_SCR;
void __iomem *addr;
if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
@@ -184,120 +287,126 @@
static int inic_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
{
- void __iomem *scr_addr = ap->ioaddr.scr_addr;
- void __iomem *addr;
+ void __iomem *scr_addr = inic_port_base(ap) + PORT_SCR;
if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
return -EINVAL;
- addr = scr_addr + scr_map[sc_reg] * 4;
writel(val, scr_addr + scr_map[sc_reg] * 4);
return 0;
}
-/*
- * In TF mode, inic162x is very similar to SFF device. TF registers
- * function the same. DMA engine behaves similary using the same PRD
- * format as BMDMA but different command register, interrupt and event
- * notification methods are used. The following inic_bmdma_*()
- * functions do the impedance matching.
- */
-static void inic_bmdma_setup(struct ata_queued_cmd *qc)
+static void inic_stop_idma(struct ata_port *ap)
{
- struct ata_port *ap = qc->ap;
- struct inic_port_priv *pp = ap->private_data;
- void __iomem *port_base = inic_port_base(ap);
- int rw = qc->tf.flags & ATA_TFLAG_WRITE;
-
- /* make sure device sees PRD table writes */
- wmb();
-
- /* load transfer length */
- writel(qc->nbytes, port_base + PORT_PRD_XFERLEN);
-
- /* turn on DMA and specify data direction */
- pp->cached_prdctl = pp->dfl_prdctl | PRD_CTL_DMAEN;
- if (!rw)
- pp->cached_prdctl |= PRD_CTL_WR;
- writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
-
- /* issue r/w command */
- ap->ops->sff_exec_command(ap, &qc->tf);
-}
-
-static void inic_bmdma_start(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct inic_port_priv *pp = ap->private_data;
void __iomem *port_base = inic_port_base(ap);
- /* start host DMA transaction */
- pp->cached_prdctl |= PRD_CTL_START;
- writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
+ readb(port_base + PORT_RPQ_FIFO);
+ readb(port_base + PORT_RPQ_CNT);
+ writew(0, port_base + PORT_IDMA_CTL);
}
-static void inic_bmdma_stop(struct ata_queued_cmd *qc)
+static void inic_host_err_intr(struct ata_port *ap, u8 irq_stat, u16 idma_stat)
{
- struct ata_port *ap = qc->ap;
+ struct ata_eh_info *ehi = &ap->link.eh_info;
struct inic_port_priv *pp = ap->private_data;
- void __iomem *port_base = inic_port_base(ap);
+ struct inic_cpb *cpb = &pp->pkt->cpb;
+ bool freeze = false;
- /* stop DMA engine */
- writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL);
-}
+ ata_ehi_clear_desc(ehi);
+ ata_ehi_push_desc(ehi, "irq_stat=0x%x idma_stat=0x%x",
+ irq_stat, idma_stat);
-static u8 inic_bmdma_status(struct ata_port *ap)
-{
- /* event is already verified by the interrupt handler */
- return ATA_DMA_INTR;
+ inic_stop_idma(ap);
+
+ if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) {
+ ata_ehi_push_desc(ehi, "hotplug");
+ ata_ehi_hotplugged(ehi);
+ freeze = true;
+ }
+
+ if (idma_stat & IDMA_STAT_PERR) {
+ ata_ehi_push_desc(ehi, "PCI error");
+ freeze = true;
+ }
+
+ if (idma_stat & IDMA_STAT_CPBERR) {
+ ata_ehi_push_desc(ehi, "CPB error");
+
+ if (cpb->resp_flags & CPB_RESP_IGNORED) {
+ __ata_ehi_push_desc(ehi, " ignored");
+ ehi->err_mask |= AC_ERR_INVALID;
+ freeze = true;
+ }
+
+ if (cpb->resp_flags & CPB_RESP_ATA_ERR)
+ ehi->err_mask |= AC_ERR_DEV;
+
+ if (cpb->resp_flags & CPB_RESP_SPURIOUS) {
+ __ata_ehi_push_desc(ehi, " spurious-intr");
+ ehi->err_mask |= AC_ERR_HSM;
+ freeze = true;
+ }
+
+ if (cpb->resp_flags &
+ (CPB_RESP_UNDERFLOW | CPB_RESP_OVERFLOW)) {
+ __ata_ehi_push_desc(ehi, " data-over/underflow");
+ ehi->err_mask |= AC_ERR_HSM;
+ freeze = true;
+ }
+ }
+
+ if (freeze)
+ ata_port_freeze(ap);
+ else
+ ata_port_abort(ap);
}
static void inic_host_intr(struct ata_port *ap)
{
void __iomem *port_base = inic_port_base(ap);
- struct ata_eh_info *ehi = &ap->link.eh_info;
+ struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag);
u8 irq_stat;
+ u16 idma_stat;
- /* fetch and clear irq */
+ /* read and clear IRQ status */
irq_stat = readb(port_base + PORT_IRQ_STAT);
writeb(irq_stat, port_base + PORT_IRQ_STAT);
+ idma_stat = readw(port_base + PORT_IDMA_STAT);
- if (likely(!(irq_stat & PIRQ_ERR))) {
- struct ata_queued_cmd *qc =
- ata_qc_from_tag(ap, ap->link.active_tag);
+ if (unlikely((irq_stat & PIRQ_ERR) || (idma_stat & IDMA_STAT_ERR)))
+ inic_host_err_intr(ap, irq_stat, idma_stat);
- if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
- ap->ops->sff_check_status(ap); /* clear ATA interrupt */
- return;
- }
+ if (unlikely(!qc))
+ goto spurious;
- if (likely(ata_sff_host_intr(ap, qc)))
- return;
+ if (likely(idma_stat & IDMA_STAT_DONE)) {
+ inic_stop_idma(ap);
- ap->ops->sff_check_status(ap); /* clear ATA interrupt */
- ata_port_printk(ap, KERN_WARNING, "unhandled "
- "interrupt, irq_stat=%x\n", irq_stat);
+ /* Depending on circumstances, device error
+ * isn't reported by IDMA, check it explicitly.
+ */
+ if (unlikely(readb(port_base + PORT_TF_COMMAND) &
+ (ATA_DF | ATA_ERR)))
+ qc->err_mask |= AC_ERR_DEV;
+
+ ata_qc_complete(qc);
return;
}
- /* error */
- ata_ehi_push_desc(ehi, "irq_stat=0x%x", irq_stat);
-
- if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) {
- ata_ehi_hotplugged(ehi);
- ata_port_freeze(ap);
- } else
- ata_port_abort(ap);
+ spurious:
+ ata_port_printk(ap, KERN_WARNING, "unhandled interrupt: "
+ "cmd=0x%x irq_stat=0x%x idma_stat=0x%x\n",
+ qc ? qc->tf.command : 0xff, irq_stat, idma_stat);
}
static irqreturn_t inic_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
- void __iomem *mmio_base = host->iomap[MMIO_BAR];
+ struct inic_host_priv *hpriv = host->private_data;
u16 host_irq_stat;
int i, handled = 0;;
- host_irq_stat = readw(mmio_base + HOST_IRQ_STAT);
+ host_irq_stat = readw(hpriv->mmio_base + HOST_IRQ_STAT);
if (unlikely(!(host_irq_stat & HIRQ_GLOBAL)))
goto out;
@@ -327,60 +436,173 @@
return IRQ_RETVAL(handled);
}
+static int inic_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ /* For some reason ATAPI_PROT_DMA doesn't work for some
+ * commands including writes and other misc ops. Use PIO
+ * protocol instead, which BTW is driven by the DMA engine
+ * anyway, so it shouldn't make much difference for native
+ * SATA devices.
+ */
+ if (atapi_cmd_type(qc->cdb[0]) == READ)
+ return 0;
+ return 1;
+}
+
+static void inic_fill_sg(struct inic_prd *prd, struct ata_queued_cmd *qc)
+{
+ struct scatterlist *sg;
+ unsigned int si;
+ u8 flags = 0;
+
+ if (qc->tf.flags & ATA_TFLAG_WRITE)
+ flags |= PRD_WRITE;
+
+ if (ata_is_dma(qc->tf.protocol))
+ flags |= PRD_DMA;
+
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
+ prd->mad = cpu_to_le32(sg_dma_address(sg));
+ prd->len = cpu_to_le16(sg_dma_len(sg));
+ prd->flags = flags;
+ prd++;
+ }
+
+ WARN_ON(!si);
+ prd[-1].flags |= PRD_END;
+}
+
+static void inic_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct inic_port_priv *pp = qc->ap->private_data;
+ struct inic_pkt *pkt = pp->pkt;
+ struct inic_cpb *cpb = &pkt->cpb;
+ struct inic_prd *prd = pkt->prd;
+ bool is_atapi = ata_is_atapi(qc->tf.protocol);
+ bool is_data = ata_is_data(qc->tf.protocol);
+ unsigned int cdb_len = 0;
+
+ VPRINTK("ENTER\n");
+
+ if (is_atapi)
+ cdb_len = qc->dev->cdb_len;
+
+ /* prepare packet, based on initio driver */
+ memset(pkt, 0, sizeof(struct inic_pkt));
+
+ cpb->ctl_flags = CPB_CTL_VALID | CPB_CTL_IEN;
+ if (is_atapi || is_data)
+ cpb->ctl_flags |= CPB_CTL_DATA;
+
+ cpb->len = cpu_to_le32(qc->nbytes + cdb_len);
+ cpb->prd = cpu_to_le32(pp->pkt_dma + offsetof(struct inic_pkt, prd));
+
+ cpb->device = qc->tf.device;
+ cpb->feature = qc->tf.feature;
+ cpb->nsect = qc->tf.nsect;
+ cpb->lbal = qc->tf.lbal;
+ cpb->lbam = qc->tf.lbam;
+ cpb->lbah = qc->tf.lbah;
+
+ if (qc->tf.flags & ATA_TFLAG_LBA48) {
+ cpb->hob_feature = qc->tf.hob_feature;
+ cpb->hob_nsect = qc->tf.hob_nsect;
+ cpb->hob_lbal = qc->tf.hob_lbal;
+ cpb->hob_lbam = qc->tf.hob_lbam;
+ cpb->hob_lbah = qc->tf.hob_lbah;
+ }
+
+ cpb->command = qc->tf.command;
+ /* don't load ctl - dunno why. it's like that in the initio driver */
+
+ /* setup PRD for CDB */
+ if (is_atapi) {
+ memcpy(pkt->cdb, qc->cdb, ATAPI_CDB_LEN);
+ prd->mad = cpu_to_le32(pp->pkt_dma +
+ offsetof(struct inic_pkt, cdb));
+ prd->len = cpu_to_le16(cdb_len);
+ prd->flags = PRD_CDB | PRD_WRITE;
+ if (!is_data)
+ prd->flags |= PRD_END;
+ prd++;
+ }
+
+ /* setup sg table */
+ if (is_data)
+ inic_fill_sg(prd, qc);
+
+ pp->cpb_tbl[0] = pp->pkt_dma;
+}
+
static unsigned int inic_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
+ void __iomem *port_base = inic_port_base(ap);
- /* ATA IRQ doesn't wait for DMA transfer completion and vice
- * versa. Mask IRQ selectively to detect command completion.
- * Without it, ATA DMA read command can cause data corruption.
- *
- * Something similar might be needed for ATAPI writes. I
- * tried a lot of combinations but couldn't find the solution.
+ /* fire up the ADMA engine */
+ writew(HCTL_FTHD0, port_base + HOST_CTL);
+ writew(IDMA_CTL_GO, port_base + PORT_IDMA_CTL);
+ writeb(0, port_base + PORT_CPB_PTQFIFO);
+
+ return 0;
+}
+
+static void inic_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+ void __iomem *port_base = inic_port_base(ap);
+
+ tf->feature = readb(port_base + PORT_TF_FEATURE);
+ tf->nsect = readb(port_base + PORT_TF_NSECT);
+ tf->lbal = readb(port_base + PORT_TF_LBAL);
+ tf->lbam = readb(port_base + PORT_TF_LBAM);
+ tf->lbah = readb(port_base + PORT_TF_LBAH);
+ tf->device = readb(port_base + PORT_TF_DEVICE);
+ tf->command = readb(port_base + PORT_TF_COMMAND);
+}
+
+static bool inic_qc_fill_rtf(struct ata_queued_cmd *qc)
+{
+ struct ata_taskfile *rtf = &qc->result_tf;
+ struct ata_taskfile tf;
+
+ /* FIXME: Except for status and error, result TF access
+ * doesn't work. I tried reading from BAR0/2, CPB and BAR5.
+ * None works regardless of which command interface is used.
+ * For now return true iff status indicates device error.
+ * This means that we're reporting bogus sector for RW
+ * failures. Eeekk....
*/
- if (qc->tf.protocol == ATA_PROT_DMA &&
- !(qc->tf.flags & ATA_TFLAG_WRITE))
- inic_set_pirq_mask(ap, PIRQ_MASK_DMA_READ);
- else
- inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
+ inic_tf_read(qc->ap, &tf);
- /* Issuing a command to yet uninitialized port locks up the
- * controller. Most of the time, this happens for the first
- * command after reset which are ATA and ATAPI IDENTIFYs.
- * Fast fail if stat is 0x7f or 0xff for those commands.
- */
- if (unlikely(qc->tf.command == ATA_CMD_ID_ATA ||
- qc->tf.command == ATA_CMD_ID_ATAPI)) {
- u8 stat = ap->ops->sff_check_status(ap);
- if (stat == 0x7f || stat == 0xff)
- return AC_ERR_HSM;
- }
+ if (!(tf.command & ATA_ERR))
+ return false;
- return ata_sff_qc_issue(qc);
+ rtf->command = tf.command;
+ rtf->feature = tf.feature;
+ return true;
}
static void inic_freeze(struct ata_port *ap)
{
void __iomem *port_base = inic_port_base(ap);
- __inic_set_pirq_mask(ap, PIRQ_MASK_FREEZE);
-
- ap->ops->sff_check_status(ap);
+ writeb(PIRQ_MASK_FREEZE, port_base + PORT_IRQ_MASK);
writeb(0xff, port_base + PORT_IRQ_STAT);
-
- readb(port_base + PORT_IRQ_STAT); /* flush */
}
static void inic_thaw(struct ata_port *ap)
{
void __iomem *port_base = inic_port_base(ap);
- ap->ops->sff_check_status(ap);
writeb(0xff, port_base + PORT_IRQ_STAT);
+ writeb(PIRQ_MASK_DEFAULT, port_base + PORT_IRQ_MASK);
+}
- __inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
+static int inic_check_ready(struct ata_link *link)
+{
+ void __iomem *port_base = inic_port_base(link->ap);
- readb(port_base + PORT_IRQ_STAT); /* flush */
+ return ata_check_ready(readb(port_base + PORT_TF_COMMAND));
}
/*
@@ -394,17 +616,15 @@
void __iomem *port_base = inic_port_base(ap);
void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
- u16 val;
int rc;
/* hammer it into sane state */
inic_reset_port(port_base);
- val = readw(idma_ctl);
- writew(val | IDMA_CTL_RST_ATA, idma_ctl);
+ writew(IDMA_CTL_RST_ATA, idma_ctl);
readw(idma_ctl); /* flush */
msleep(1);
- writew(val & ~IDMA_CTL_RST_ATA, idma_ctl);
+ writew(0, idma_ctl);
rc = sata_link_resume(link, timing, deadline);
if (rc) {
@@ -418,7 +638,7 @@
struct ata_taskfile tf;
/* wait for link to become ready */
- rc = ata_sff_wait_after_reset(link, 1, deadline);
+ rc = ata_wait_after_reset(link, deadline, inic_check_ready);
/* link occupied, -ENODEV too is an error */
if (rc) {
ata_link_printk(link, KERN_WARNING, "device not ready "
@@ -426,7 +646,7 @@
return rc;
}
- ata_sff_tf_read(ap, &tf);
+ inic_tf_read(ap, &tf);
*class = ata_dev_classify(&tf);
}
@@ -436,18 +656,8 @@
static void inic_error_handler(struct ata_port *ap)
{
void __iomem *port_base = inic_port_base(ap);
- struct inic_port_priv *pp = ap->private_data;
- unsigned long flags;
- /* reset PIO HSM and stop DMA engine */
inic_reset_port(port_base);
-
- spin_lock_irqsave(ap->lock, flags);
- ap->hsm_task_state = HSM_ST_IDLE;
- writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL);
- spin_unlock_irqrestore(ap->lock, flags);
-
- /* PIO and DMA engines have been stopped, perform recovery */
ata_std_error_handler(ap);
}
@@ -458,26 +668,18 @@
inic_reset_port(inic_port_base(qc->ap));
}
-static void inic_dev_config(struct ata_device *dev)
-{
- /* inic can only handle upto LBA28 max sectors */
- if (dev->max_sectors > ATA_MAX_SECTORS)
- dev->max_sectors = ATA_MAX_SECTORS;
-
- if (dev->n_sectors >= 1 << 28) {
- ata_dev_printk(dev, KERN_ERR,
- "ERROR: This driver doesn't support LBA48 yet and may cause\n"
- " data corruption on such devices. Disabling.\n");
- ata_dev_disable(dev);
- }
-}
-
static void init_port(struct ata_port *ap)
{
void __iomem *port_base = inic_port_base(ap);
+ struct inic_port_priv *pp = ap->private_data;
- /* Setup PRD address */
+ /* clear packet and CPB table */
+ memset(pp->pkt, 0, sizeof(struct inic_pkt));
+ memset(pp->cpb_tbl, 0, IDMA_CPB_TBL_SIZE);
+
+ /* setup PRD and CPB lookup table addresses */
writel(ap->prd_dma, port_base + PORT_PRD_ADDR);
+ writel(pp->cpb_tbl_dma, port_base + PORT_CPB_CPBLAR);
}
static int inic_port_resume(struct ata_port *ap)
@@ -488,28 +690,30 @@
static int inic_port_start(struct ata_port *ap)
{
- void __iomem *port_base = inic_port_base(ap);
+ struct device *dev = ap->host->dev;
struct inic_port_priv *pp;
- u8 tmp;
int rc;
/* alloc and initialize private data */
- pp = devm_kzalloc(ap->host->dev, sizeof(*pp), GFP_KERNEL);
+ pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
return -ENOMEM;
ap->private_data = pp;
- /* default PRD_CTL value, DMAEN, WR and START off */
- tmp = readb(port_base + PORT_PRD_CTL);
- tmp &= ~(PRD_CTL_DMAEN | PRD_CTL_WR | PRD_CTL_START);
- pp->dfl_prdctl = tmp;
-
/* Alloc resources */
rc = ata_port_start(ap);
- if (rc) {
- kfree(pp);
+ if (rc)
return rc;
- }
+
+ pp->pkt = dmam_alloc_coherent(dev, sizeof(struct inic_pkt),
+ &pp->pkt_dma, GFP_KERNEL);
+ if (!pp->pkt)
+ return -ENOMEM;
+
+ pp->cpb_tbl = dmam_alloc_coherent(dev, IDMA_CPB_TBL_SIZE,
+ &pp->cpb_tbl_dma, GFP_KERNEL);
+ if (!pp->cpb_tbl)
+ return -ENOMEM;
init_port(ap);
@@ -517,21 +721,18 @@
}
static struct ata_port_operations inic_port_ops = {
- .inherits = &ata_sff_port_ops,
+ .inherits = &sata_port_ops,
- .bmdma_setup = inic_bmdma_setup,
- .bmdma_start = inic_bmdma_start,
- .bmdma_stop = inic_bmdma_stop,
- .bmdma_status = inic_bmdma_status,
+ .check_atapi_dma = inic_check_atapi_dma,
+ .qc_prep = inic_qc_prep,
.qc_issue = inic_qc_issue,
+ .qc_fill_rtf = inic_qc_fill_rtf,
.freeze = inic_freeze,
.thaw = inic_thaw,
- .softreset = ATA_OP_NULL, /* softreset is broken */
.hardreset = inic_hardreset,
.error_handler = inic_error_handler,
.post_internal_cmd = inic_post_internal_cmd,
- .dev_config = inic_dev_config,
.scr_read = inic_scr_read,
.scr_write = inic_scr_write,
@@ -541,12 +742,6 @@
};
static struct ata_port_info inic_port_info = {
- /* For some reason, ATAPI_PROT_PIO is broken on this
- * controller, and no, PIO_POLLING does't fix it. It somehow
- * manages to report the wrong ireason and ignoring ireason
- * results in machine lock up. Tell libata to always prefer
- * DMA.
- */
.flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@@ -599,7 +794,6 @@
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
struct inic_host_priv *hpriv = host->private_data;
- void __iomem *mmio_base = host->iomap[MMIO_BAR];
int rc;
rc = ata_pci_device_do_resume(pdev);
@@ -607,7 +801,7 @@
return rc;
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
- rc = init_controller(mmio_base, hpriv->cached_hctl);
+ rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl);
if (rc)
return rc;
}
@@ -625,6 +819,7 @@
struct ata_host *host;
struct inic_host_priv *hpriv;
void __iomem * const *iomap;
+ int mmio_bar;
int i, rc;
if (!printed_version++)
@@ -638,39 +833,32 @@
host->private_data = hpriv;
- /* acquire resources and fill host */
+ /* Acquire resources and fill host. Note that PCI and cardbus
+ * use different BARs.
+ */
rc = pcim_enable_device(pdev);
if (rc)
return rc;
- rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME);
+ if (pci_resource_flags(pdev, MMIO_BAR_PCI) & IORESOURCE_MEM)
+ mmio_bar = MMIO_BAR_PCI;
+ else
+ mmio_bar = MMIO_BAR_CARDBUS;
+
+ rc = pcim_iomap_regions(pdev, 1 << mmio_bar, DRV_NAME);
if (rc)
return rc;
host->iomap = iomap = pcim_iomap_table(pdev);
+ hpriv->mmio_base = iomap[mmio_bar];
+ hpriv->cached_hctl = readw(hpriv->mmio_base + HOST_CTL);
for (i = 0; i < NR_PORTS; i++) {
struct ata_port *ap = host->ports[i];
- struct ata_ioports *port = &ap->ioaddr;
- unsigned int offset = i * PORT_SIZE;
- port->cmd_addr = iomap[2 * i];
- port->altstatus_addr =
- port->ctl_addr = (void __iomem *)
- ((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS);
- port->scr_addr = iomap[MMIO_BAR] + offset + PORT_SCR;
-
- ata_sff_std_ports(port);
-
- ata_port_pbar_desc(ap, MMIO_BAR, -1, "mmio");
- ata_port_pbar_desc(ap, MMIO_BAR, offset, "port");
- ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
- (unsigned long long)pci_resource_start(pdev, 2 * i),
- (unsigned long long)pci_resource_start(pdev, (2 * i + 1)) |
- ATA_PCI_CTL_OFS);
+ ata_port_pbar_desc(ap, mmio_bar, -1, "mmio");
+ ata_port_pbar_desc(ap, mmio_bar, i * PORT_SIZE, "port");
}
- hpriv->cached_hctl = readw(iomap[MMIO_BAR] + HOST_CTL);
-
/* Set dma_mask. This devices doesn't support 64bit addressing. */
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
@@ -698,7 +886,7 @@
return rc;
}
- rc = init_controller(iomap[MMIO_BAR], hpriv->cached_hctl);
+ rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"failed to initialize controller\n");
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 842b1a15..bb73b22 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -65,6 +65,7 @@
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mbus.h>
+#include <linux/bitops.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
@@ -91,9 +92,9 @@
MV_IRQ_COAL_TIME_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xd0),
MV_SATAHC0_REG_BASE = 0x20000,
- MV_FLASH_CTL = 0x1046c,
- MV_GPIO_PORT_CTL = 0x104f0,
- MV_RESET_CFG = 0x180d8,
+ MV_FLASH_CTL_OFS = 0x1046c,
+ MV_GPIO_PORT_CTL_OFS = 0x104f0,
+ MV_RESET_CFG_OFS = 0x180d8,
MV_PCI_REG_SZ = MV_MAJOR_REG_AREA_SZ,
MV_SATAHC_REG_SZ = MV_MAJOR_REG_AREA_SZ,
@@ -147,18 +148,21 @@
/* PCI interface registers */
PCI_COMMAND_OFS = 0xc00,
+ PCI_COMMAND_MRDTRIG = (1 << 7), /* PCI Master Read Trigger */
PCI_MAIN_CMD_STS_OFS = 0xd30,
STOP_PCI_MASTER = (1 << 2),
PCI_MASTER_EMPTY = (1 << 3),
GLOB_SFT_RST = (1 << 4),
- MV_PCI_MODE = 0xd00,
+ MV_PCI_MODE_OFS = 0xd00,
+ MV_PCI_MODE_MASK = 0x30,
+
MV_PCI_EXP_ROM_BAR_CTL = 0xd2c,
MV_PCI_DISC_TIMER = 0xd04,
MV_PCI_MSI_TRIGGER = 0xc38,
MV_PCI_SERR_MASK = 0xc28,
- MV_PCI_XBAR_TMOUT = 0x1d04,
+ MV_PCI_XBAR_TMOUT_OFS = 0x1d04,
MV_PCI_ERR_LOW_ADDRESS = 0x1d40,
MV_PCI_ERR_HIGH_ADDRESS = 0x1d44,
MV_PCI_ERR_ATTRIBUTE = 0x1d48,
@@ -225,16 +229,18 @@
PHY_MODE4 = 0x314,
PHY_MODE2 = 0x330,
SATA_IFCTL_OFS = 0x344,
+ SATA_TESTCTL_OFS = 0x348,
SATA_IFSTAT_OFS = 0x34c,
VENDOR_UNIQUE_FIS_OFS = 0x35c,
- FIS_CFG_OFS = 0x360,
- FIS_CFG_SINGLE_SYNC = (1 << 16), /* SYNC on DMA activation */
+ FISCFG_OFS = 0x360,
+ FISCFG_WAIT_DEV_ERR = (1 << 8), /* wait for host on DevErr */
+ FISCFG_SINGLE_SYNC = (1 << 16), /* SYNC on DMA activation */
MV5_PHY_MODE = 0x74,
- MV5_LT_MODE = 0x30,
- MV5_PHY_CTL = 0x0C,
- SATA_INTERFACE_CFG = 0x050,
+ MV5_LTMODE_OFS = 0x30,
+ MV5_PHY_CTL_OFS = 0x0C,
+ SATA_INTERFACE_CFG_OFS = 0x050,
MV_M2_PREAMP_MASK = 0x7e0,
@@ -332,10 +338,16 @@
EDMA_CMD_OFS = 0x28, /* EDMA command register */
EDMA_EN = (1 << 0), /* enable EDMA */
EDMA_DS = (1 << 1), /* disable EDMA; self-negated */
- ATA_RST = (1 << 2), /* reset trans/link/phy */
+ EDMA_RESET = (1 << 2), /* reset eng/trans/link/phy */
- EDMA_IORDY_TMOUT = 0x34,
- EDMA_ARB_CFG = 0x38,
+ EDMA_STATUS_OFS = 0x30, /* EDMA engine status */
+ EDMA_STATUS_CACHE_EMPTY = (1 << 6), /* GenIIe command cache empty */
+ EDMA_STATUS_IDLE = (1 << 7), /* GenIIe EDMA enabled/idle */
+
+ EDMA_IORDY_TMOUT_OFS = 0x34,
+ EDMA_ARB_CFG_OFS = 0x38,
+
+ EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */
GEN_II_NCQ_MAX_SECTORS = 256, /* max sects/io on Gen2 w/NCQ */
@@ -350,15 +362,19 @@
MV_HP_GEN_II = (1 << 7), /* Generation II: 60xx */
MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */
MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */
+ MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */
/* Port private flags (pp_flags) */
MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */
MV_PP_FLAG_NCQ_EN = (1 << 1), /* is EDMA set up for NCQ? */
+ MV_PP_FLAG_FBS_EN = (1 << 2), /* is EDMA set up for FBS? */
+ MV_PP_FLAG_DELAYED_EH = (1 << 3), /* delayed dev err handling */
};
#define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I)
#define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II)
#define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
+#define IS_PCIE(hpriv) ((hpriv)->hp_flags & MV_HP_PCIE)
#define HAS_PCI(host) (!((host)->ports[0]->flags & MV_FLAG_SOC))
#define WINDOW_CTRL(i) (0x20030 + ((i) << 4))
@@ -433,6 +449,7 @@
unsigned int resp_idx;
u32 pp_flags;
+ unsigned int delayed_eh_pmp_map;
};
struct mv_port_signal {
@@ -479,6 +496,7 @@
static int mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
static int mv_port_start(struct ata_port *ap);
static void mv_port_stop(struct ata_port *ap);
+static int mv_qc_defer(struct ata_queued_cmd *qc);
static void mv_qc_prep(struct ata_queued_cmd *qc);
static void mv_qc_prep_iie(struct ata_queued_cmd *qc);
static unsigned int mv_qc_issue(struct ata_queued_cmd *qc);
@@ -527,6 +545,9 @@
unsigned long deadline);
static int mv_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
+static void mv_pmp_error_handler(struct ata_port *ap);
+static void mv_process_crpb_entries(struct ata_port *ap,
+ struct mv_port_priv *pp);
/* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below
* because we have to allow room for worst case splitting of
@@ -548,6 +569,7 @@
static struct ata_port_operations mv5_ops = {
.inherits = &ata_sff_port_ops,
+ .qc_defer = mv_qc_defer,
.qc_prep = mv_qc_prep,
.qc_issue = mv_qc_issue,
@@ -566,7 +588,6 @@
static struct ata_port_operations mv6_ops = {
.inherits = &mv5_ops,
- .qc_defer = sata_pmp_qc_defer_cmd_switch,
.dev_config = mv6_dev_config,
.scr_read = mv_scr_read,
.scr_write = mv_scr_write,
@@ -574,12 +595,11 @@
.pmp_hardreset = mv_pmp_hardreset,
.pmp_softreset = mv_softreset,
.softreset = mv_softreset,
- .error_handler = sata_pmp_error_handler,
+ .error_handler = mv_pmp_error_handler,
};
static struct ata_port_operations mv_iie_ops = {
.inherits = &mv6_ops,
- .qc_defer = ata_std_qc_defer, /* FIS-based switching */
.dev_config = ATA_OP_NULL,
.qc_prep = mv_qc_prep_iie,
};
@@ -875,6 +895,29 @@
}
}
+static void mv_wait_for_edma_empty_idle(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ const u32 empty_idle = (EDMA_STATUS_CACHE_EMPTY | EDMA_STATUS_IDLE);
+ const int per_loop = 5, timeout = (15 * 1000 / per_loop);
+ int i;
+
+ /*
+ * Wait for the EDMA engine to finish transactions in progress.
+ * No idea what a good "timeout" value might be, but measurements
+ * indicate that it often requires hundreds of microseconds
+ * with two drives in-use. So we use the 15msec value above
+ * as a rough guess at what even more drives might require.
+ */
+ for (i = 0; i < timeout; ++i) {
+ u32 edma_stat = readl(port_mmio + EDMA_STATUS_OFS);
+ if ((edma_stat & empty_idle) == empty_idle)
+ break;
+ udelay(per_loop);
+ }
+ /* ata_port_printk(ap, KERN_INFO, "%s: %u+ usecs\n", __func__, i); */
+}
+
/**
* mv_stop_edma_engine - Disable eDMA engine
* @port_mmio: io base address
@@ -907,6 +950,7 @@
if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN))
return 0;
pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+ mv_wait_for_edma_empty_idle(ap);
if (mv_stop_edma_engine(port_mmio)) {
ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n");
return -EIO;
@@ -1057,26 +1101,95 @@
}
}
-static void mv_config_fbs(void __iomem *port_mmio, int enable_fbs)
+static int mv_qc_defer(struct ata_queued_cmd *qc)
{
- u32 old_fcfg, new_fcfg, old_ltmode, new_ltmode;
+ struct ata_link *link = qc->dev->link;
+ struct ata_port *ap = link->ap;
+ struct mv_port_priv *pp = ap->private_data;
+
/*
- * Various bit settings required for operation
- * in FIS-based switching (fbs) mode on GenIIe:
+ * Don't allow new commands if we're in a delayed EH state
+ * for NCQ and/or FIS-based switching.
*/
- old_fcfg = readl(port_mmio + FIS_CFG_OFS);
- old_ltmode = readl(port_mmio + LTMODE_OFS);
- if (enable_fbs) {
- new_fcfg = old_fcfg | FIS_CFG_SINGLE_SYNC;
- new_ltmode = old_ltmode | LTMODE_BIT8;
- } else { /* disable fbs */
- new_fcfg = old_fcfg & ~FIS_CFG_SINGLE_SYNC;
- new_ltmode = old_ltmode & ~LTMODE_BIT8;
+ if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH)
+ return ATA_DEFER_PORT;
+ /*
+ * If the port is completely idle, then allow the new qc.
+ */
+ if (ap->nr_active_links == 0)
+ return 0;
+
+ if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
+ /*
+ * The port is operating in host queuing mode (EDMA).
+ * It can accomodate a new qc if the qc protocol
+ * is compatible with the current host queue mode.
+ */
+ if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) {
+ /*
+ * The host queue (EDMA) is in NCQ mode.
+ * If the new qc is also an NCQ command,
+ * then allow the new qc.
+ */
+ if (qc->tf.protocol == ATA_PROT_NCQ)
+ return 0;
+ } else {
+ /*
+ * The host queue (EDMA) is in non-NCQ, DMA mode.
+ * If the new qc is also a non-NCQ, DMA command,
+ * then allow the new qc.
+ */
+ if (qc->tf.protocol == ATA_PROT_DMA)
+ return 0;
+ }
}
- if (new_fcfg != old_fcfg)
- writelfl(new_fcfg, port_mmio + FIS_CFG_OFS);
+ return ATA_DEFER_PORT;
+}
+
+static void mv_config_fbs(void __iomem *port_mmio, int want_ncq, int want_fbs)
+{
+ u32 new_fiscfg, old_fiscfg;
+ u32 new_ltmode, old_ltmode;
+ u32 new_haltcond, old_haltcond;
+
+ old_fiscfg = readl(port_mmio + FISCFG_OFS);
+ old_ltmode = readl(port_mmio + LTMODE_OFS);
+ old_haltcond = readl(port_mmio + EDMA_HALTCOND_OFS);
+
+ new_fiscfg = old_fiscfg & ~(FISCFG_SINGLE_SYNC | FISCFG_WAIT_DEV_ERR);
+ new_ltmode = old_ltmode & ~LTMODE_BIT8;
+ new_haltcond = old_haltcond | EDMA_ERR_DEV;
+
+ if (want_fbs) {
+ new_fiscfg = old_fiscfg | FISCFG_SINGLE_SYNC;
+ new_ltmode = old_ltmode | LTMODE_BIT8;
+ if (want_ncq)
+ new_haltcond &= ~EDMA_ERR_DEV;
+ else
+ new_fiscfg |= FISCFG_WAIT_DEV_ERR;
+ }
+
+ if (new_fiscfg != old_fiscfg)
+ writelfl(new_fiscfg, port_mmio + FISCFG_OFS);
if (new_ltmode != old_ltmode)
writelfl(new_ltmode, port_mmio + LTMODE_OFS);
+ if (new_haltcond != old_haltcond)
+ writelfl(new_haltcond, port_mmio + EDMA_HALTCOND_OFS);
+}
+
+static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq)
+{
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ u32 old, new;
+
+ /* workaround for 88SX60x1 FEr SATA#25 (part 1) */
+ old = readl(hpriv->base + MV_GPIO_PORT_CTL_OFS);
+ if (want_ncq)
+ new = old | (1 << 22);
+ else
+ new = old & ~(1 << 22);
+ if (new != old)
+ writel(new, hpriv->base + MV_GPIO_PORT_CTL_OFS);
}
static void mv_edma_cfg(struct ata_port *ap, int want_ncq)
@@ -1088,25 +1201,40 @@
/* set up non-NCQ EDMA configuration */
cfg = EDMA_CFG_Q_DEPTH; /* always 0x1f for *all* chips */
+ pp->pp_flags &= ~MV_PP_FLAG_FBS_EN;
if (IS_GEN_I(hpriv))
cfg |= (1 << 8); /* enab config burst size mask */
- else if (IS_GEN_II(hpriv))
+ else if (IS_GEN_II(hpriv)) {
cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN;
+ mv_60x1_errata_sata25(ap, want_ncq);
- else if (IS_GEN_IIE(hpriv)) {
+ } else if (IS_GEN_IIE(hpriv)) {
+ int want_fbs = sata_pmp_attached(ap);
+ /*
+ * Possible future enhancement:
+ *
+ * The chip can use FBS with non-NCQ, if we allow it,
+ * But first we need to have the error handling in place
+ * for this mode (datasheet section 7.3.15.4.2.3).
+ * So disallow non-NCQ FBS for now.
+ */
+ want_fbs &= want_ncq;
+
+ mv_config_fbs(port_mmio, want_ncq, want_fbs);
+
+ if (want_fbs) {
+ pp->pp_flags |= MV_PP_FLAG_FBS_EN;
+ cfg |= EDMA_CFG_EDMA_FBS; /* FIS-based switching */
+ }
+
cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */
cfg |= (1 << 22); /* enab 4-entry host queue cache */
- cfg |= (1 << 18); /* enab early completion */
- cfg |= (1 << 17); /* enab cut-through (dis stor&forwrd) */
-
- if (want_ncq && sata_pmp_attached(ap)) {
- cfg |= EDMA_CFG_EDMA_FBS; /* FIS-based switching */
- mv_config_fbs(port_mmio, 1);
- } else {
- mv_config_fbs(port_mmio, 0);
- }
+ if (HAS_PCI(ap->host))
+ cfg |= (1 << 18); /* enab early completion */
+ if (hpriv->hp_flags & MV_HP_CUT_THROUGH)
+ cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */
}
if (want_ncq) {
@@ -1483,25 +1611,186 @@
return qc;
}
-static void mv_unexpected_intr(struct ata_port *ap)
+static void mv_pmp_error_handler(struct ata_port *ap)
{
+ unsigned int pmp, pmp_map;
struct mv_port_priv *pp = ap->private_data;
- struct ata_eh_info *ehi = &ap->link.eh_info;
- char *when = "";
+
+ if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH) {
+ /*
+ * Perform NCQ error analysis on failed PMPs
+ * before we freeze the port entirely.
+ *
+ * The failed PMPs are marked earlier by mv_pmp_eh_prep().
+ */
+ pmp_map = pp->delayed_eh_pmp_map;
+ pp->pp_flags &= ~MV_PP_FLAG_DELAYED_EH;
+ for (pmp = 0; pmp_map != 0; pmp++) {
+ unsigned int this_pmp = (1 << pmp);
+ if (pmp_map & this_pmp) {
+ struct ata_link *link = &ap->pmp_link[pmp];
+ pmp_map &= ~this_pmp;
+ ata_eh_analyze_ncq_error(link);
+ }
+ }
+ ata_port_freeze(ap);
+ }
+ sata_pmp_error_handler(ap);
+}
+
+static unsigned int mv_get_err_pmp_map(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+
+ return readl(port_mmio + SATA_TESTCTL_OFS) >> 16;
+}
+
+static void mv_pmp_eh_prep(struct ata_port *ap, unsigned int pmp_map)
+{
+ struct ata_eh_info *ehi;
+ unsigned int pmp;
/*
- * We got a device interrupt from something that
- * was supposed to be using EDMA or polling.
+ * Initialize EH info for PMPs which saw device errors
*/
+ ehi = &ap->link.eh_info;
+ for (pmp = 0; pmp_map != 0; pmp++) {
+ unsigned int this_pmp = (1 << pmp);
+ if (pmp_map & this_pmp) {
+ struct ata_link *link = &ap->pmp_link[pmp];
+
+ pmp_map &= ~this_pmp;
+ ehi = &link->eh_info;
+ ata_ehi_clear_desc(ehi);
+ ata_ehi_push_desc(ehi, "dev err");
+ ehi->err_mask |= AC_ERR_DEV;
+ ehi->action |= ATA_EH_RESET;
+ ata_link_abort(link);
+ }
+ }
+}
+
+static int mv_handle_fbs_ncq_dev_err(struct ata_port *ap)
+{
+ struct mv_port_priv *pp = ap->private_data;
+ int failed_links;
+ unsigned int old_map, new_map;
+
+ /*
+ * Device error during FBS+NCQ operation:
+ *
+ * Set a port flag to prevent further I/O being enqueued.
+ * Leave the EDMA running to drain outstanding commands from this port.
+ * Perform the post-mortem/EH only when all responses are complete.
+ * Follow recovery sequence from 6042/7042 datasheet (7.3.15.4.2.2).
+ */
+ if (!(pp->pp_flags & MV_PP_FLAG_DELAYED_EH)) {
+ pp->pp_flags |= MV_PP_FLAG_DELAYED_EH;
+ pp->delayed_eh_pmp_map = 0;
+ }
+ old_map = pp->delayed_eh_pmp_map;
+ new_map = old_map | mv_get_err_pmp_map(ap);
+
+ if (old_map != new_map) {
+ pp->delayed_eh_pmp_map = new_map;
+ mv_pmp_eh_prep(ap, new_map & ~old_map);
+ }
+ failed_links = hweight16(new_map);
+
+ ata_port_printk(ap, KERN_INFO, "%s: pmp_map=%04x qc_map=%04x "
+ "failed_links=%d nr_active_links=%d\n",
+ __func__, pp->delayed_eh_pmp_map,
+ ap->qc_active, failed_links,
+ ap->nr_active_links);
+
+ if (ap->nr_active_links <= failed_links) {
+ mv_process_crpb_entries(ap, pp);
+ mv_stop_edma(ap);
+ mv_eh_freeze(ap);
+ ata_port_printk(ap, KERN_INFO, "%s: done\n", __func__);
+ return 1; /* handled */
+ }
+ ata_port_printk(ap, KERN_INFO, "%s: waiting\n", __func__);
+ return 1; /* handled */
+}
+
+static int mv_handle_fbs_non_ncq_dev_err(struct ata_port *ap)
+{
+ /*
+ * Possible future enhancement:
+ *
+ * FBS+non-NCQ operation is not yet implemented.
+ * See related notes in mv_edma_cfg().
+ *
+ * Device error during FBS+non-NCQ operation:
+ *
+ * We need to snapshot the shadow registers for each failed command.
+ * Follow recovery sequence from 6042/7042 datasheet (7.3.15.4.2.3).
+ */
+ return 0; /* not handled */
+}
+
+static int mv_handle_dev_err(struct ata_port *ap, u32 edma_err_cause)
+{
+ struct mv_port_priv *pp = ap->private_data;
+
+ if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN))
+ return 0; /* EDMA was not active: not handled */
+ if (!(pp->pp_flags & MV_PP_FLAG_FBS_EN))
+ return 0; /* FBS was not active: not handled */
+
+ if (!(edma_err_cause & EDMA_ERR_DEV))
+ return 0; /* non DEV error: not handled */
+ edma_err_cause &= ~EDMA_ERR_IRQ_TRANSIENT;
+ if (edma_err_cause & ~(EDMA_ERR_DEV | EDMA_ERR_SELF_DIS))
+ return 0; /* other problems: not handled */
+
+ if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) {
+ /*
+ * EDMA should NOT have self-disabled for this case.
+ * If it did, then something is wrong elsewhere,
+ * and we cannot handle it here.
+ */
+ if (edma_err_cause & EDMA_ERR_SELF_DIS) {
+ ata_port_printk(ap, KERN_WARNING,
+ "%s: err_cause=0x%x pp_flags=0x%x\n",
+ __func__, edma_err_cause, pp->pp_flags);
+ return 0; /* not handled */
+ }
+ return mv_handle_fbs_ncq_dev_err(ap);
+ } else {
+ /*
+ * EDMA should have self-disabled for this case.
+ * If it did not, then something is wrong elsewhere,
+ * and we cannot handle it here.
+ */
+ if (!(edma_err_cause & EDMA_ERR_SELF_DIS)) {
+ ata_port_printk(ap, KERN_WARNING,
+ "%s: err_cause=0x%x pp_flags=0x%x\n",
+ __func__, edma_err_cause, pp->pp_flags);
+ return 0; /* not handled */
+ }
+ return mv_handle_fbs_non_ncq_dev_err(ap);
+ }
+ return 0; /* not handled */
+}
+
+static void mv_unexpected_intr(struct ata_port *ap, int edma_was_enabled)
+{
+ struct ata_eh_info *ehi = &ap->link.eh_info;
+ char *when = "idle";
+
ata_ehi_clear_desc(ehi);
- if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
- when = " while EDMA enabled";
+ if (!ap || (ap->flags & ATA_FLAG_DISABLED)) {
+ when = "disabled";
+ } else if (edma_was_enabled) {
+ when = "EDMA enabled";
} else {
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag);
if (qc && (qc->tf.flags & ATA_TFLAG_POLLING))
- when = " while polling";
+ when = "polling";
}
- ata_ehi_push_desc(ehi, "unexpected device interrupt%s", when);
+ ata_ehi_push_desc(ehi, "unexpected device interrupt while %s", when);
ehi->err_mask |= AC_ERR_OTHER;
ehi->action |= ATA_EH_RESET;
ata_port_freeze(ap);
@@ -1519,7 +1808,7 @@
* LOCKING:
* Inherited from caller.
*/
-static void mv_err_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
+static void mv_err_intr(struct ata_port *ap)
{
void __iomem *port_mmio = mv_ap_base(ap);
u32 edma_err_cause, eh_freeze_mask, serr = 0;
@@ -1527,24 +1816,42 @@
struct mv_host_priv *hpriv = ap->host->private_data;
unsigned int action = 0, err_mask = 0;
struct ata_eh_info *ehi = &ap->link.eh_info;
-
- ata_ehi_clear_desc(ehi);
+ struct ata_queued_cmd *qc;
+ int abort = 0;
/*
- * Read and clear the err_cause bits. This won't actually
- * clear for some errors (eg. SError), but we will be doing
- * a hard reset in those cases regardless, which *will* clear it.
+ * Read and clear the SError and err_cause bits.
*/
+ sata_scr_read(&ap->link, SCR_ERROR, &serr);
+ sata_scr_write_flush(&ap->link, SCR_ERROR, serr);
+
edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
writelfl(~edma_err_cause, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
- ata_ehi_push_desc(ehi, "edma_err_cause=%08x", edma_err_cause);
+ ata_port_printk(ap, KERN_INFO, "%s: err_cause=%08x pp_flags=0x%x\n",
+ __func__, edma_err_cause, pp->pp_flags);
+ if (edma_err_cause & EDMA_ERR_DEV) {
+ /*
+ * Device errors during FIS-based switching operation
+ * require special handling.
+ */
+ if (mv_handle_dev_err(ap, edma_err_cause))
+ return;
+ }
+
+ qc = mv_get_active_qc(ap);
+ ata_ehi_clear_desc(ehi);
+ ata_ehi_push_desc(ehi, "edma_err_cause=%08x pp_flags=%08x",
+ edma_err_cause, pp->pp_flags);
/*
* All generations share these EDMA error cause bits:
*/
- if (edma_err_cause & EDMA_ERR_DEV)
+ if (edma_err_cause & EDMA_ERR_DEV) {
err_mask |= AC_ERR_DEV;
+ action |= ATA_EH_RESET;
+ ata_ehi_push_desc(ehi, "dev error");
+ }
if (edma_err_cause & (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR |
EDMA_ERR_CRQB_PAR | EDMA_ERR_CRPB_PAR |
EDMA_ERR_INTRL_PAR)) {
@@ -1576,13 +1883,6 @@
ata_ehi_push_desc(ehi, "EDMA self-disable");
}
if (edma_err_cause & EDMA_ERR_SERR) {
- /*
- * Ensure that we read our own SCR, not a pmp link SCR:
- */
- ap->ops->scr_read(ap, SCR_ERROR, &serr);
- /*
- * Don't clear SError here; leave it for libata-eh:
- */
ata_ehi_push_desc(ehi, "SError=%08x", serr);
err_mask |= AC_ERR_ATA_BUS;
action |= ATA_EH_RESET;
@@ -1602,10 +1902,29 @@
else
ehi->err_mask |= err_mask;
- if (edma_err_cause & eh_freeze_mask)
+ if (err_mask == AC_ERR_DEV) {
+ /*
+ * Cannot do ata_port_freeze() here,
+ * because it would kill PIO access,
+ * which is needed for further diagnosis.
+ */
+ mv_eh_freeze(ap);
+ abort = 1;
+ } else if (edma_err_cause & eh_freeze_mask) {
+ /*
+ * Note to self: ata_port_freeze() calls ata_port_abort()
+ */
ata_port_freeze(ap);
- else
- ata_port_abort(ap);
+ } else {
+ abort = 1;
+ }
+
+ if (abort) {
+ if (qc)
+ ata_link_abort(qc->dev->link);
+ else
+ ata_port_abort(ap);
+ }
}
static void mv_process_crpb_response(struct ata_port *ap,
@@ -1632,8 +1951,9 @@
}
}
ata_status = edma_status >> CRPB_FLAG_STATUS_SHIFT;
- qc->err_mask |= ac_err_mask(ata_status);
- ata_qc_complete(qc);
+ if (!ac_err_mask(ata_status))
+ ata_qc_complete(qc);
+ /* else: leave it for mv_err_intr() */
} else {
ata_port_printk(ap, KERN_ERR, "%s: no qc for tag=%d\n",
__func__, tag);
@@ -1677,6 +1997,44 @@
port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
}
+static void mv_port_intr(struct ata_port *ap, u32 port_cause)
+{
+ struct mv_port_priv *pp;
+ int edma_was_enabled;
+
+ if (!ap || (ap->flags & ATA_FLAG_DISABLED)) {
+ mv_unexpected_intr(ap, 0);
+ return;
+ }
+ /*
+ * Grab a snapshot of the EDMA_EN flag setting,
+ * so that we have a consistent view for this port,
+ * even if something we call of our routines changes it.
+ */
+ pp = ap->private_data;
+ edma_was_enabled = (pp->pp_flags & MV_PP_FLAG_EDMA_EN);
+ /*
+ * Process completed CRPB response(s) before other events.
+ */
+ if (edma_was_enabled && (port_cause & DONE_IRQ)) {
+ mv_process_crpb_entries(ap, pp);
+ if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH)
+ mv_handle_fbs_ncq_dev_err(ap);
+ }
+ /*
+ * Handle chip-reported errors, or continue on to handle PIO.
+ */
+ if (unlikely(port_cause & ERR_IRQ)) {
+ mv_err_intr(ap);
+ } else if (!edma_was_enabled) {
+ struct ata_queued_cmd *qc = mv_get_active_qc(ap);
+ if (qc)
+ ata_sff_host_intr(ap, qc);
+ else
+ mv_unexpected_intr(ap, edma_was_enabled);
+ }
+}
+
/**
* mv_host_intr - Handle all interrupts on the given host controller
* @host: host specific structure
@@ -1688,66 +2046,58 @@
static int mv_host_intr(struct ata_host *host, u32 main_irq_cause)
{
struct mv_host_priv *hpriv = host->private_data;
- void __iomem *mmio = hpriv->base, *hc_mmio = NULL;
- u32 hc_irq_cause = 0;
+ void __iomem *mmio = hpriv->base, *hc_mmio;
unsigned int handled = 0, port;
for (port = 0; port < hpriv->n_ports; port++) {
struct ata_port *ap = host->ports[port];
- struct mv_port_priv *pp;
- unsigned int shift, hardport, port_cause;
- /*
- * When we move to the second hc, flag our cached
- * copies of hc_mmio (and hc_irq_cause) as invalid again.
- */
- if (port == MV_PORTS_PER_HC)
- hc_mmio = NULL;
- /*
- * Do nothing if port is not interrupting or is disabled:
- */
+ unsigned int p, shift, hardport, port_cause;
+
MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport);
- port_cause = (main_irq_cause >> shift) & (DONE_IRQ | ERR_IRQ);
- if (!port_cause || !ap || (ap->flags & ATA_FLAG_DISABLED))
- continue;
/*
- * Each hc within the host has its own hc_irq_cause register.
- * We defer reading it until we know we need it, right now:
- *
- * FIXME later: we don't really need to read this register
- * (some logic changes required below if we go that way),
- * because it doesn't tell us anything new. But we do need
- * to write to it, outside the top of this loop,
- * to reset the interrupt triggers for next time.
+ * Each hc within the host has its own hc_irq_cause register,
+ * where the interrupting ports bits get ack'd.
*/
- if (!hc_mmio) {
+ if (hardport == 0) { /* first port on this hc ? */
+ u32 hc_cause = (main_irq_cause >> shift) & HC0_IRQ_PEND;
+ u32 port_mask, ack_irqs;
+ /*
+ * Skip this entire hc if nothing pending for any ports
+ */
+ if (!hc_cause) {
+ port += MV_PORTS_PER_HC - 1;
+ continue;
+ }
+ /*
+ * We don't need/want to read the hc_irq_cause register,
+ * because doing so hurts performance, and
+ * main_irq_cause already gives us everything we need.
+ *
+ * But we do have to *write* to the hc_irq_cause to ack
+ * the ports that we are handling this time through.
+ *
+ * This requires that we create a bitmap for those
+ * ports which interrupted us, and use that bitmap
+ * to ack (only) those ports via hc_irq_cause.
+ */
+ ack_irqs = 0;
+ for (p = 0; p < MV_PORTS_PER_HC; ++p) {
+ if ((port + p) >= hpriv->n_ports)
+ break;
+ port_mask = (DONE_IRQ | ERR_IRQ) << (p * 2);
+ if (hc_cause & port_mask)
+ ack_irqs |= (DMA_IRQ | DEV_IRQ) << p;
+ }
hc_mmio = mv_hc_base_from_port(mmio, port);
- hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
- writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
+ writelfl(~ack_irqs, hc_mmio + HC_IRQ_CAUSE_OFS);
handled = 1;
}
/*
- * Process completed CRPB response(s) before other events.
+ * Handle interrupts signalled for this port:
*/
- pp = ap->private_data;
- if (hc_irq_cause & (DMA_IRQ << hardport)) {
- if (pp->pp_flags & MV_PP_FLAG_EDMA_EN)
- mv_process_crpb_entries(ap, pp);
- }
- /*
- * Handle chip-reported errors, or continue on to handle PIO.
- */
- if (unlikely(port_cause & ERR_IRQ)) {
- mv_err_intr(ap, mv_get_active_qc(ap));
- } else if (hc_irq_cause & (DEV_IRQ << hardport)) {
- if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) {
- struct ata_queued_cmd *qc = mv_get_active_qc(ap);
- if (qc) {
- ata_sff_host_intr(ap, qc);
- continue;
- }
- }
- mv_unexpected_intr(ap);
- }
+ port_cause = (main_irq_cause >> shift) & (DONE_IRQ | ERR_IRQ);
+ if (port_cause)
+ mv_port_intr(ap, port_cause);
}
return handled;
}
@@ -1894,7 +2244,7 @@
static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio)
{
- writel(0x0fcfffff, mmio + MV_FLASH_CTL);
+ writel(0x0fcfffff, mmio + MV_FLASH_CTL_OFS);
}
static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx,
@@ -1913,7 +2263,7 @@
{
u32 tmp;
- writel(0, mmio + MV_GPIO_PORT_CTL);
+ writel(0, mmio + MV_GPIO_PORT_CTL_OFS);
/* FIXME: handle MV_HP_ERRATA_50XXB2 errata */
@@ -1931,14 +2281,14 @@
int fix_apm_sq = (hpriv->hp_flags & MV_HP_ERRATA_50XXB0);
if (fix_apm_sq) {
- tmp = readl(phy_mmio + MV5_LT_MODE);
+ tmp = readl(phy_mmio + MV5_LTMODE_OFS);
tmp |= (1 << 19);
- writel(tmp, phy_mmio + MV5_LT_MODE);
+ writel(tmp, phy_mmio + MV5_LTMODE_OFS);
- tmp = readl(phy_mmio + MV5_PHY_CTL);
+ tmp = readl(phy_mmio + MV5_PHY_CTL_OFS);
tmp &= ~0x3;
tmp |= 0x1;
- writel(tmp, phy_mmio + MV5_PHY_CTL);
+ writel(tmp, phy_mmio + MV5_PHY_CTL_OFS);
}
tmp = readl(phy_mmio + MV5_PHY_MODE);
@@ -1956,11 +2306,6 @@
{
void __iomem *port_mmio = mv_port_base(mmio, port);
- /*
- * The datasheet warns against setting ATA_RST when EDMA is active
- * (but doesn't say what the problem might be). So we first try
- * to disable the EDMA engine before doing the ATA_RST operation.
- */
mv_reset_channel(hpriv, mmio, port);
ZERO(0x028); /* command */
@@ -1975,7 +2320,7 @@
ZERO(0x024); /* respq outp */
ZERO(0x020); /* respq inp */
ZERO(0x02c); /* test control */
- writel(0xbc, port_mmio + EDMA_IORDY_TMOUT);
+ writel(0xbc, port_mmio + EDMA_IORDY_TMOUT_OFS);
}
#undef ZERO
@@ -2021,13 +2366,13 @@
struct mv_host_priv *hpriv = host->private_data;
u32 tmp;
- tmp = readl(mmio + MV_PCI_MODE);
+ tmp = readl(mmio + MV_PCI_MODE_OFS);
tmp &= 0xff00ffff;
- writel(tmp, mmio + MV_PCI_MODE);
+ writel(tmp, mmio + MV_PCI_MODE_OFS);
ZERO(MV_PCI_DISC_TIMER);
ZERO(MV_PCI_MSI_TRIGGER);
- writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT);
+ writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT_OFS);
ZERO(PCI_HC_MAIN_IRQ_MASK_OFS);
ZERO(MV_PCI_SERR_MASK);
ZERO(hpriv->irq_cause_ofs);
@@ -2045,10 +2390,10 @@
mv5_reset_flash(hpriv, mmio);
- tmp = readl(mmio + MV_GPIO_PORT_CTL);
+ tmp = readl(mmio + MV_GPIO_PORT_CTL_OFS);
tmp &= 0x3;
tmp |= (1 << 5) | (1 << 6);
- writel(tmp, mmio + MV_GPIO_PORT_CTL);
+ writel(tmp, mmio + MV_GPIO_PORT_CTL_OFS);
}
/**
@@ -2121,7 +2466,7 @@
void __iomem *port_mmio;
u32 tmp;
- tmp = readl(mmio + MV_RESET_CFG);
+ tmp = readl(mmio + MV_RESET_CFG_OFS);
if ((tmp & (1 << 0)) == 0) {
hpriv->signal[idx].amps = 0x7 << 8;
hpriv->signal[idx].pre = 0x1 << 5;
@@ -2137,7 +2482,7 @@
static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio)
{
- writel(0x00000060, mmio + MV_GPIO_PORT_CTL);
+ writel(0x00000060, mmio + MV_GPIO_PORT_CTL_OFS);
}
static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
@@ -2235,11 +2580,6 @@
{
void __iomem *port_mmio = mv_port_base(mmio, port);
- /*
- * The datasheet warns against setting ATA_RST when EDMA is active
- * (but doesn't say what the problem might be). So we first try
- * to disable the EDMA engine before doing the ATA_RST operation.
- */
mv_reset_channel(hpriv, mmio, port);
ZERO(0x028); /* command */
@@ -2254,7 +2594,7 @@
ZERO(0x024); /* respq outp */
ZERO(0x020); /* respq inp */
ZERO(0x02c); /* test control */
- writel(0xbc, port_mmio + EDMA_IORDY_TMOUT);
+ writel(0xbc, port_mmio + EDMA_IORDY_TMOUT_OFS);
}
#undef ZERO
@@ -2297,38 +2637,39 @@
return;
}
-static void mv_setup_ifctl(void __iomem *port_mmio, int want_gen2i)
+static void mv_setup_ifcfg(void __iomem *port_mmio, int want_gen2i)
{
- u32 ifctl = readl(port_mmio + SATA_INTERFACE_CFG);
+ u32 ifcfg = readl(port_mmio + SATA_INTERFACE_CFG_OFS);
- ifctl = (ifctl & 0xf7f) | 0x9b1000; /* from chip spec */
+ ifcfg = (ifcfg & 0xf7f) | 0x9b1000; /* from chip spec */
if (want_gen2i)
- ifctl |= (1 << 7); /* enable gen2i speed */
- writelfl(ifctl, port_mmio + SATA_INTERFACE_CFG);
+ ifcfg |= (1 << 7); /* enable gen2i speed */
+ writelfl(ifcfg, port_mmio + SATA_INTERFACE_CFG_OFS);
}
-/*
- * Caller must ensure that EDMA is not active,
- * by first doing mv_stop_edma() where needed.
- */
static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int port_no)
{
void __iomem *port_mmio = mv_port_base(mmio, port_no);
+ /*
+ * The datasheet warns against setting EDMA_RESET when EDMA is active
+ * (but doesn't say what the problem might be). So we first try
+ * to disable the EDMA engine before doing the EDMA_RESET operation.
+ */
mv_stop_edma_engine(port_mmio);
- writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS);
+ writelfl(EDMA_RESET, port_mmio + EDMA_CMD_OFS);
if (!IS_GEN_I(hpriv)) {
- /* Enable 3.0gb/s link speed */
- mv_setup_ifctl(port_mmio, 1);
+ /* Enable 3.0gb/s link speed: this survives EDMA_RESET */
+ mv_setup_ifcfg(port_mmio, 1);
}
/*
- * Strobing ATA_RST here causes a hard reset of the SATA transport,
+ * Strobing EDMA_RESET here causes a hard reset of the SATA transport,
* link, and physical layers. It resets all SATA interface registers
* (except for SATA_INTERFACE_CFG), and issues a COMRESET to the dev.
*/
- writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS);
+ writelfl(EDMA_RESET, port_mmio + EDMA_CMD_OFS);
udelay(25); /* allow reset propagation */
writelfl(0, port_mmio + EDMA_CMD_OFS);
@@ -2392,7 +2733,7 @@
sata_scr_read(link, SCR_STATUS, &sstatus);
if (!IS_GEN_I(hpriv) && ++attempts >= 5 && sstatus == 0x121) {
/* Force 1.5gb/s link speed and try again */
- mv_setup_ifctl(mv_ap_base(ap), 0);
+ mv_setup_ifcfg(mv_ap_base(ap), 0);
if (time_after(jiffies + HZ, deadline))
extra = HZ; /* only extend it once, max */
}
@@ -2493,6 +2834,34 @@
readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS));
}
+static unsigned int mv_in_pcix_mode(struct ata_host *host)
+{
+ struct mv_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->base;
+ u32 reg;
+
+ if (!HAS_PCI(host) || !IS_PCIE(hpriv))
+ return 0; /* not PCI-X capable */
+ reg = readl(mmio + MV_PCI_MODE_OFS);
+ if ((reg & MV_PCI_MODE_MASK) == 0)
+ return 0; /* conventional PCI mode */
+ return 1; /* chip is in PCI-X mode */
+}
+
+static int mv_pci_cut_through_okay(struct ata_host *host)
+{
+ struct mv_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->base;
+ u32 reg;
+
+ if (!mv_in_pcix_mode(host)) {
+ reg = readl(mmio + PCI_COMMAND_OFS);
+ if (reg & PCI_COMMAND_MRDTRIG)
+ return 0; /* not okay */
+ }
+ return 1; /* okay */
+}
+
static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
{
struct pci_dev *pdev = to_pci_dev(host->dev);
@@ -2560,7 +2929,7 @@
break;
case chip_7042:
- hp_flags |= MV_HP_PCIE;
+ hp_flags |= MV_HP_PCIE | MV_HP_CUT_THROUGH;
if (pdev->vendor == PCI_VENDOR_ID_TTI &&
(pdev->device == 0x2300 || pdev->device == 0x2310))
{
@@ -2590,9 +2959,12 @@
" and avoid the final two gigabytes on"
" all RocketRAID BIOS initialized drives.\n");
}
+ /* drop through */
case chip_6042:
hpriv->ops = &mv6xxx_ops;
hp_flags |= MV_HP_GEN_IIE;
+ if (board_idx == chip_6042 && mv_pci_cut_through_okay(host))
+ hp_flags |= MV_HP_CUT_THROUGH;
switch (pdev->revision) {
case 0x0:
diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c
index 6fe4174..e38dfed 100644
--- a/drivers/base/cpu.c
+++ b/drivers/base/cpu.c
@@ -18,7 +18,7 @@
};
EXPORT_SYMBOL(cpu_sysdev_class);
-static struct sys_device *cpu_sys_devices[NR_CPUS];
+static DEFINE_PER_CPU(struct sys_device *, cpu_sys_devices);
#ifdef CONFIG_HOTPLUG_CPU
static ssize_t show_online(struct sys_device *dev, char *buf)
@@ -68,7 +68,7 @@
sysdev_remove_file(&cpu->sysdev, &attr_online);
sysdev_unregister(&cpu->sysdev);
- cpu_sys_devices[logical_cpu] = NULL;
+ per_cpu(cpu_sys_devices, logical_cpu) = NULL;
return;
}
#else /* ... !CONFIG_HOTPLUG_CPU */
@@ -167,7 +167,7 @@
if (!error && cpu->hotpluggable)
register_cpu_control(cpu);
if (!error)
- cpu_sys_devices[num] = &cpu->sysdev;
+ per_cpu(cpu_sys_devices, num) = &cpu->sysdev;
if (!error)
register_cpu_under_node(num, cpu_to_node(num));
@@ -180,8 +180,8 @@
struct sys_device *get_cpu_sysdev(unsigned cpu)
{
- if (cpu < NR_CPUS)
- return cpu_sys_devices[cpu];
+ if (cpu < nr_cpu_ids && cpu_possible(cpu))
+ return per_cpu(cpu_sys_devices, cpu);
else
return NULL;
}
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 4fbb56b..358bb0b 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -175,8 +175,7 @@
}
/* Check whether this driver has already been added to a class. */
- if ((drv->entry.next != drv->entry.prev) ||
- (drv->entry.next != NULL)) {
+ if (drv->entry.next && !list_empty(&drv->entry)) {
printk(KERN_WARNING "sysdev: class %s: driver (%p) has already"
" been registered to a class, something is wrong, but "
"will forge on!\n", cls->name, drv);
diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c
index 8fc429c..41f818b 100644
--- a/drivers/block/aoe/aoecmd.c
+++ b/drivers/block/aoe/aoecmd.c
@@ -755,11 +755,13 @@
{
unsigned long n_sect = bio->bi_size >> 9;
const int rw = bio_data_dir(bio);
+ struct hd_struct *part;
- all_stat_inc(disk, ios[rw], sector);
- all_stat_add(disk, ticks[rw], duration, sector);
- all_stat_add(disk, sectors[rw], n_sect, sector);
- all_stat_add(disk, io_ticks, duration, sector);
+ part = get_part(disk, sector);
+ all_stat_inc(disk, part, ios[rw], sector);
+ all_stat_add(disk, part, ticks[rw], duration, sector);
+ all_stat_add(disk, part, sectors[rw], n_sect, sector);
+ all_stat_add(disk, part, io_ticks, duration, sector);
}
void
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index e539be5..e336b05 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -428,13 +428,9 @@
proc_cciss = proc_mkdir("driver/cciss", NULL);
if (!proc_cciss)
return;
- pde = proc_create(hba[i]->devname, S_IWUSR | S_IRUSR | S_IRGRP |
+ pde = proc_create_data(hba[i]->devname, S_IWUSR | S_IRUSR | S_IRGRP |
S_IROTH, proc_cciss,
- &cciss_proc_fops);
- if (!pde)
- return;
-
- pde->data = hba[i];
+ &cciss_proc_fops, hba[i]);
}
#endif /* CONFIG_PROC_FS */
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index e322cce..3a281ef 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -205,6 +205,7 @@
unsigned char key, asc, ascq; /* May be valid if error==-EIO */
int stat_count; /* Retries getting status. */
+ unsigned int timeo; /* jiffies until rq->timeout changes */
unsigned int len; /* Requested length */
unsigned int current_sg;
@@ -318,6 +319,7 @@
int openc; /* protected by ub_lock! */
/* kref is too implicit for our taste */
int reset; /* Reset is running */
+ int bad_resid;
unsigned int tagcnt;
char name[12];
struct usb_device *dev;
@@ -764,6 +766,12 @@
cmd->cdb_len = rq->cmd_len;
cmd->len = rq->data_len;
+
+ /*
+ * To reapply this to every URB is not as incorrect as it looks.
+ * In return, we avoid any complicated tracking calculations.
+ */
+ cmd->timeo = rq->timeout;
}
static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
@@ -785,10 +793,6 @@
scsi_status = 0;
} else {
if (cmd->act_len != cmd->len) {
- if ((cmd->key == MEDIUM_ERROR ||
- cmd->key == UNIT_ATTENTION) &&
- ub_rw_cmd_retry(sc, lun, urq, cmd) == 0)
- return;
scsi_status = SAM_STAT_CHECK_CONDITION;
} else {
scsi_status = 0;
@@ -804,7 +808,10 @@
else
scsi_status = DID_ERROR << 16;
} else {
- if (cmd->error == -EIO) {
+ if (cmd->error == -EIO &&
+ (cmd->key == 0 ||
+ cmd->key == MEDIUM_ERROR ||
+ cmd->key == UNIT_ATTENTION)) {
if (ub_rw_cmd_retry(sc, lun, urq, cmd) == 0)
return;
}
@@ -1259,14 +1266,19 @@
return;
}
- len = le32_to_cpu(bcs->Residue);
- if (len != cmd->len - cmd->act_len) {
- /*
- * It is all right to transfer less, the caller has
- * to check. But it's not all right if the device
- * counts disagree with our counts.
- */
- goto Bad_End;
+ if (!sc->bad_resid) {
+ len = le32_to_cpu(bcs->Residue);
+ if (len != cmd->len - cmd->act_len) {
+ /*
+ * Only start ignoring if this cmd ended well.
+ */
+ if (cmd->len == cmd->act_len) {
+ printk(KERN_NOTICE "%s: "
+ "bad residual %d of %d, ignoring\n",
+ sc->name, len, cmd->len);
+ sc->bad_resid = 1;
+ }
+ }
}
switch (bcs->Status) {
@@ -1297,8 +1309,7 @@
ub_state_done(sc, cmd, -EIO);
} else {
- printk(KERN_WARNING "%s: "
- "wrong command state %d\n",
+ printk(KERN_WARNING "%s: wrong command state %d\n",
sc->name, cmd->state);
ub_state_done(sc, cmd, -EINVAL);
return;
@@ -1336,7 +1347,10 @@
return;
}
- sc->work_timer.expires = jiffies + UB_DATA_TIMEOUT;
+ if (cmd->timeo)
+ sc->work_timer.expires = jiffies + cmd->timeo;
+ else
+ sc->work_timer.expires = jiffies + UB_DATA_TIMEOUT;
add_timer(&sc->work_timer);
cmd->state = UB_CMDST_DATA;
@@ -1376,7 +1390,10 @@
return -1;
}
- sc->work_timer.expires = jiffies + UB_STAT_TIMEOUT;
+ if (cmd->timeo)
+ sc->work_timer.expires = jiffies + cmd->timeo;
+ else
+ sc->work_timer.expires = jiffies + UB_STAT_TIMEOUT;
add_timer(&sc->work_timer);
return 0;
}
@@ -1515,8 +1532,7 @@
return;
}
if (cmd->state != UB_CMDST_SENSE) {
- printk(KERN_WARNING "%s: "
- "sense done with bad cmd state %d\n",
+ printk(KERN_WARNING "%s: sense done with bad cmd state %d\n",
sc->name, cmd->state);
return;
}
@@ -1720,7 +1736,7 @@
}
/*
- * This is called once a new disk was seen by the block layer or by ub_probe().
+ * This is called by check_disk_change if we reported a media change.
* The main onjective here is to discover the features of the media such as
* the capacity, read-only status, etc. USB storage generally does not
* need to be spun up, but if we needed it, this would be the place.
@@ -2136,8 +2152,7 @@
}
if (ep_in == NULL || ep_out == NULL) {
- printk(KERN_NOTICE "%s: failed endpoint check\n",
- sc->name);
+ printk(KERN_NOTICE "%s: failed endpoint check\n", sc->name);
return -ENODEV;
}
@@ -2354,7 +2369,7 @@
spin_unlock_irqrestore(&ub_lock, flags);
/*
- * Fence stall clearnings, operations triggered by unlinkings and so on.
+ * Fence stall clearings, operations triggered by unlinkings and so on.
* We do not attempt to unlink any URBs, because we do not trust the
* unlink paths in HC drivers. Also, we get -84 upon disconnect anyway.
*/
@@ -2417,7 +2432,7 @@
spin_unlock_irqrestore(sc->lock, flags);
/*
- * There is virtually no chance that other CPU runs times so long
+ * There is virtually no chance that other CPU runs a timeout so long
* after ub_urb_complete should have called del_timer, but only if HCD
* didn't forget to deliver a callback on unlink.
*/
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 0cfbe8c..84e064f 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -35,7 +35,7 @@
struct list_head list;
struct request *req;
struct virtio_blk_outhdr out_hdr;
- struct virtio_blk_inhdr in_hdr;
+ u8 status;
};
static void blk_done(struct virtqueue *vq)
@@ -48,7 +48,7 @@
spin_lock_irqsave(&vblk->lock, flags);
while ((vbr = vblk->vq->vq_ops->get_buf(vblk->vq, &len)) != NULL) {
int uptodate;
- switch (vbr->in_hdr.status) {
+ switch (vbr->status) {
case VIRTIO_BLK_S_OK:
uptodate = 1;
break;
@@ -101,7 +101,7 @@
sg_init_table(vblk->sg, VIRTIO_MAX_SG);
sg_set_buf(&vblk->sg[0], &vbr->out_hdr, sizeof(vbr->out_hdr));
num = blk_rq_map_sg(q, vbr->req, vblk->sg+1);
- sg_set_buf(&vblk->sg[num+1], &vbr->in_hdr, sizeof(vbr->in_hdr));
+ sg_set_buf(&vblk->sg[num+1], &vbr->status, sizeof(vbr->status));
if (rq_data_dir(vbr->req) == WRITE) {
vbr->out_hdr.type |= VIRTIO_BLK_T_OUT;
@@ -157,10 +157,25 @@
/* We provide getgeo only to please some old bootloader/partitioning tools */
static int virtblk_getgeo(struct block_device *bd, struct hd_geometry *geo)
{
- /* some standard values, similar to sd */
- geo->heads = 1 << 6;
- geo->sectors = 1 << 5;
- geo->cylinders = get_capacity(bd->bd_disk) >> 11;
+ struct virtio_blk *vblk = bd->bd_disk->private_data;
+ struct virtio_blk_geometry vgeo;
+ int err;
+
+ /* see if the host passed in geometry config */
+ err = virtio_config_val(vblk->vdev, VIRTIO_BLK_F_GEOMETRY,
+ offsetof(struct virtio_blk_config, geometry),
+ &vgeo);
+
+ if (!err) {
+ geo->heads = vgeo.heads;
+ geo->sectors = vgeo.sectors;
+ geo->cylinders = vgeo.cylinders;
+ } else {
+ /* some standard values, similar to sd */
+ geo->heads = 1 << 6;
+ geo->sectors = 1 << 5;
+ geo->cylinders = get_capacity(bd->bd_disk) >> 11;
+ }
return 0;
}
@@ -242,12 +257,12 @@
index++;
/* If barriers are supported, tell block layer that queue is ordered */
- if (vdev->config->feature(vdev, VIRTIO_BLK_F_BARRIER))
+ if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER))
blk_queue_ordered(vblk->disk->queue, QUEUE_ORDERED_TAG, NULL);
/* Host must always specify the capacity. */
- __virtio_config_val(vdev, offsetof(struct virtio_blk_config, capacity),
- &cap);
+ vdev->config->get(vdev, offsetof(struct virtio_blk_config, capacity),
+ &cap, sizeof(cap));
/* If capacity is too big, truncate with warning. */
if ((sector_t)cap != cap) {
@@ -289,7 +304,6 @@
static void virtblk_remove(struct virtio_device *vdev)
{
struct virtio_blk *vblk = vdev->priv;
- int major = vblk->disk->major;
/* Nothing should be pending. */
BUG_ON(!list_empty(&vblk->reqs));
@@ -299,7 +313,6 @@
blk_cleanup_queue(vblk->disk->queue);
put_disk(vblk->disk);
- unregister_blkdev(major, "virtblk");
mempool_destroy(vblk->pool);
vdev->config->del_vq(vblk->vq);
kfree(vblk);
@@ -310,7 +323,14 @@
{ 0 },
};
+static unsigned int features[] = {
+ VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX,
+ VIRTIO_BLK_F_GEOMETRY,
+};
+
static struct virtio_driver virtio_blk = {
+ .feature_table = features,
+ .feature_table_size = ARRAY_SIZE(features),
.driver.name = KBUILD_MODNAME,
.driver.owner = THIS_MODULE,
.id_table = id_table,
diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c
index f49037b..b60d425 100644
--- a/drivers/char/i8k.c
+++ b/drivers/char/i8k.c
@@ -77,6 +77,10 @@
module_param(power_status, bool, 0600);
MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k");
+static int fan_mult = I8K_FAN_MULT;
+module_param(fan_mult, int, 0);
+MODULE_PARM_DESC(fan_mult, "Factor to multiply fan speed with");
+
static int i8k_open_fs(struct inode *inode, struct file *file);
static int i8k_ioctl(struct inode *, struct file *, unsigned int,
unsigned long);
@@ -239,7 +243,7 @@
struct smm_regs regs = { .eax = I8K_SMM_GET_SPEED, };
regs.ebx = fan & 0xff;
- return i8k_smm(®s) ? : (regs.eax & 0xffff) * I8K_FAN_MULT;
+ return i8k_smm(®s) ? : (regs.eax & 0xffff) * fan_mult;
}
/*
diff --git a/drivers/char/mmtimer.c b/drivers/char/mmtimer.c
index d83db5d8..192961f 100644
--- a/drivers/char/mmtimer.c
+++ b/drivers/char/mmtimer.c
@@ -30,6 +30,8 @@
#include <linux/miscdevice.h>
#include <linux/posix-timers.h>
#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/math64.h>
#include <asm/uaccess.h>
#include <asm/sn/addrs.h>
@@ -472,8 +474,8 @@
nsec = rtc_time() * sgi_clock_period
+ sgi_clock_offset.tv_nsec;
- tp->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &tp->tv_nsec)
- + sgi_clock_offset.tv_sec;
+ *tp = ns_to_timespec(nsec);
+ tp->tv_sec += sgi_clock_offset.tv_sec;
return 0;
};
@@ -481,11 +483,11 @@
{
u64 nsec;
- u64 rem;
+ u32 rem;
nsec = rtc_time() * sgi_clock_period;
- sgi_clock_offset.tv_sec = tp->tv_sec - div_long_long_rem(nsec, NSEC_PER_SEC, &rem);
+ sgi_clock_offset.tv_sec = tp->tv_sec - div_u64_rem(nsec, NSEC_PER_SEC, &rem);
if (rem <= tp->tv_nsec)
sgi_clock_offset.tv_nsec = tp->tv_sec - rem;
@@ -644,9 +646,6 @@
return 0;
}
-#define timespec_to_ns(x) ((x).tv_nsec + (x).tv_sec * NSEC_PER_SEC)
-#define ns_to_timespec(ts, nsec) (ts).tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &(ts).tv_nsec)
-
/* Assumption: it_lock is already held with irq's disabled */
static void sgi_timer_get(struct k_itimer *timr, struct itimerspec *cur_setting)
{
@@ -659,9 +658,8 @@
return;
}
- ns_to_timespec(cur_setting->it_interval, timr->it.mmtimer.incr * sgi_clock_period);
- ns_to_timespec(cur_setting->it_value, (timr->it.mmtimer.expires - rtc_time())* sgi_clock_period);
- return;
+ cur_setting->it_interval = ns_to_timespec(timr->it.mmtimer.incr * sgi_clock_period);
+ cur_setting->it_value = ns_to_timespec((timr->it.mmtimer.expires - rtc_time()) * sgi_clock_period);
}
@@ -679,8 +677,8 @@
sgi_timer_get(timr, old_setting);
sgi_timer_del(timr);
- when = timespec_to_ns(new_setting->it_value);
- period = timespec_to_ns(new_setting->it_interval);
+ when = timespec_to_ns(&new_setting->it_value);
+ period = timespec_to_ns(&new_setting->it_interval);
if (when == 0)
/* Clear timer */
@@ -695,7 +693,7 @@
unsigned long now;
getnstimeofday(&n);
- now = timespec_to_ns(n);
+ now = timespec_to_ns(&n);
if (when > now)
when -= now;
else
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index fd2db07..3b23270 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -1073,7 +1073,7 @@
return 0;
if (!info->xmit_buf)
- return;
+ return 0;
local_irq_save(flags);
if (info->xmit_cnt >= PAGE_SIZE - 1) {
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index f39f6fd..b1a7a8c 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -970,7 +970,8 @@
sx_write_channel_byte(port, hi_mask, 0x1f);
break;
default:
- printk(KERN_INFO "sx: Invalid wordsize: %u\n", CFLAG & CSIZE);
+ printk(KERN_INFO "sx: Invalid wordsize: %u\n",
+ (unsigned int)CFLAG & CSIZE);
break;
}
@@ -997,7 +998,8 @@
set_bit(TTY_HW_COOK_IN, &port->gs.tty->flags);
}
sx_dprintk(SX_DEBUG_TERMIOS, "iflags: %x(%d) ",
- port->gs.tty->termios->c_iflag, I_OTHER(port->gs.tty));
+ (unsigned int)port->gs.tty->termios->c_iflag,
+ I_OTHER(port->gs.tty));
/* Tell line discipline whether we will do output cooking.
* If OPOST is set and no other output flags are set then we can do output
@@ -1010,7 +1012,8 @@
clear_bit(TTY_HW_COOK_OUT, &port->gs.tty->flags);
}
sx_dprintk(SX_DEBUG_TERMIOS, "oflags: %x(%d)\n",
- port->gs.tty->termios->c_oflag, O_OTHER(port->gs.tty));
+ (unsigned int)port->gs.tty->termios->c_oflag,
+ O_OTHER(port->gs.tty));
/* port->c_dcd = sx_get_CD (port); */
func_exit();
return 0;
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index 513b7c2..ac5080d 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -2028,13 +2028,13 @@
*/
static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
{
- struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
+ struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
- int ret;
+ int ret = 0;
- if ( debug_level >= DEBUG_LEVEL_INFO ) {
- printk( "%s(%d):mgsl_put_char(%d) on %s\n",
- __FILE__,__LINE__,ch,info->device_name);
+ if (debug_level >= DEBUG_LEVEL_INFO) {
+ printk(KERN_DEBUG "%s(%d):mgsl_put_char(%d) on %s\n",
+ __FILE__, __LINE__, ch, info->device_name);
}
if (mgsl_paranoia_check(info, tty->name, "mgsl_put_char"))
@@ -2043,9 +2043,9 @@
if (!tty || !info->xmit_buf)
return 0;
- spin_lock_irqsave(&info->irq_spinlock,flags);
+ spin_lock_irqsave(&info->irq_spinlock, flags);
- if ( (info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active ) {
+ if ((info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active) {
if (info->xmit_cnt < SERIAL_XMIT_SIZE - 1) {
info->xmit_buf[info->xmit_head++] = ch;
info->xmit_head &= SERIAL_XMIT_SIZE-1;
@@ -2053,7 +2053,7 @@
ret = 1;
}
}
- spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ spin_unlock_irqrestore(&info->irq_spinlock, flags);
return ret;
} /* end of mgsl_put_char() */
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 2001b0e..55c1653 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -916,7 +916,7 @@
{
struct slgt_info *info = tty->driver_data;
unsigned long flags;
- int ret;
+ int ret = 0;
if (sanity_check(info, tty->name, "put_char"))
return 0;
diff --git a/drivers/char/tty_audit.c b/drivers/char/tty_audit.c
index 6342b05..3582f43 100644
--- a/drivers/char/tty_audit.c
+++ b/drivers/char/tty_audit.c
@@ -11,6 +11,7 @@
#include <linux/audit.h>
#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/tty.h>
struct tty_audit_buf {
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 1d298c2..49c1a22 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -78,6 +78,7 @@
#include <linux/tty_flip.h>
#include <linux/devpts_fs.h>
#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/console.h>
#include <linux/timer.h>
#include <linux/ctype.h>
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index e458b08..fa1ffbf2 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -2742,6 +2742,10 @@
tty->winsize.ws_row = vc_cons[currcons].d->vc_rows;
tty->winsize.ws_col = vc_cons[currcons].d->vc_cols;
}
+ if (vc->vc_utf)
+ tty->termios->c_iflag |= IUTF8;
+ else
+ tty->termios->c_iflag &= ~IUTF8;
release_console_sem();
vcs_make_sysfs(tty);
return ret;
@@ -2918,6 +2922,8 @@
console_driver->minor_start = 1;
console_driver->type = TTY_DRIVER_TYPE_CONSOLE;
console_driver->init_termios = tty_std_termios;
+ if (default_utf8)
+ console_driver->init_termios.c_iflag |= IUTF8;
console_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_RESET_TERMIOS;
tty_set_operations(console_driver, &con_ops);
if (tty_register_driver(console_driver))
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index dfe6907..3edf1fc 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -623,8 +623,8 @@
if (!request_mem_region(drvdata->mem_start,
drvdata->mem_size, DRIVER_NAME)) {
- dev_err(dev, "Couldn't lock memory region at %p\n",
- (void *)regs_res->start);
+ dev_err(dev, "Couldn't lock memory region at %Lx\n",
+ regs_res->start);
retval = -EBUSY;
goto failed1;
}
@@ -643,7 +643,7 @@
mutex_init(&drvdata->sem);
drvdata->is_open = 0;
- dev_info(dev, "ioremap %lx to %p with size %x\n",
+ dev_info(dev, "ioremap %lx to %p with size %Lx\n",
(unsigned long int)drvdata->mem_start,
drvdata->base_address, drvdata->mem_size);
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index a9aa845..b27b13c 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -97,7 +97,7 @@
#define PCI_VEND_DEV(vend, dev) PCI_VENDOR_ID_ ## vend, \
PCI_DEVICE_ID_ ## vend ## _ ## dev
-#define dev_name(dev) (dev)->dev_name
+#define edac_dev_name(dev) (dev)->dev_name
/* memory devices */
enum dev_type {
diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
index 63372fa..5fcd3d8 100644
--- a/drivers/edac/edac_device.c
+++ b/drivers/edac/edac_device.c
@@ -333,7 +333,7 @@
fail0:
edac_printk(KERN_WARNING, EDAC_MC,
"%s (%s) %s %s already assigned %d\n",
- rover->dev->bus_id, dev_name(rover),
+ rover->dev->bus_id, edac_dev_name(rover),
rover->mod_name, rover->ctl_name, rover->dev_idx);
return 1;
@@ -538,7 +538,7 @@
"'%s': DEV '%s' (%s)\n",
edac_dev->mod_name,
edac_dev->ctl_name,
- dev_name(edac_dev),
+ edac_dev_name(edac_dev),
edac_op_state_to_string(edac_dev->op_state));
mutex_unlock(&device_ctls_mutex);
@@ -599,7 +599,7 @@
edac_printk(KERN_INFO, EDAC_MC,
"Removed device %d for %s %s: DEV %s\n",
edac_dev->dev_idx,
- edac_dev->mod_name, edac_dev->ctl_name, dev_name(edac_dev));
+ edac_dev->mod_name, edac_dev->ctl_name, edac_dev_name(edac_dev));
return edac_dev;
}
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index a4cf164..d110392 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -402,7 +402,7 @@
fail0:
edac_printk(KERN_WARNING, EDAC_MC,
"%s (%s) %s %s already assigned %d\n", p->dev->bus_id,
- dev_name(mci), p->mod_name, p->ctl_name, p->mc_idx);
+ edac_dev_name(mci), p->mod_name, p->ctl_name, p->mc_idx);
return 1;
fail1:
@@ -517,7 +517,7 @@
/* Report action taken */
edac_mc_printk(mci, KERN_INFO, "Giving out device to '%s' '%s':"
- " DEV %s\n", mci->mod_name, mci->ctl_name, dev_name(mci));
+ " DEV %s\n", mci->mod_name, mci->ctl_name, edac_dev_name(mci));
mutex_unlock(&mem_ctls_mutex);
return 0;
@@ -565,7 +565,7 @@
edac_printk(KERN_INFO, EDAC_MC,
"Removed device %d for %s %s: DEV %s\n", mci->mc_idx,
- mci->mod_name, mci->ctl_name, dev_name(mci));
+ mci->mod_name, mci->ctl_name, edac_dev_name(mci));
return mci;
}
diff --git a/drivers/edac/edac_pci.c b/drivers/edac/edac_pci.c
index 9b24340..22ec9d5 100644
--- a/drivers/edac/edac_pci.c
+++ b/drivers/edac/edac_pci.c
@@ -150,7 +150,7 @@
fail0:
edac_printk(KERN_WARNING, EDAC_PCI,
"%s (%s) %s %s already assigned %d\n",
- rover->dev->bus_id, dev_name(rover),
+ rover->dev->bus_id, edac_dev_name(rover),
rover->mod_name, rover->ctl_name, rover->pci_idx);
return 1;
@@ -360,7 +360,7 @@
" DEV '%s' (%s)\n",
pci->mod_name,
pci->ctl_name,
- dev_name(pci), edac_op_state_to_string(pci->op_state));
+ edac_dev_name(pci), edac_op_state_to_string(pci->op_state));
mutex_unlock(&edac_pci_ctls_mutex);
return 0;
@@ -415,7 +415,7 @@
edac_printk(KERN_INFO, EDAC_PCI,
"Removed device %d for %s %s: DEV %s\n",
- pci->pci_idx, pci->mod_name, pci->ctl_name, dev_name(pci));
+ pci->pci_idx, pci->mod_name, pci->ctl_name, edac_dev_name(pci));
return pci;
}
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
index 2a999373..b2458bb 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/fw-sbp2.c
@@ -784,7 +784,7 @@
kfree(lu);
}
scsi_remove_host(shost);
- fw_notify("released %s\n", tgt->bus_id);
+ fw_notify("released %s, target %d:0:0\n", tgt->bus_id, shost->host_no);
fw_unit_put(tgt->unit);
scsi_host_put(shost);
@@ -1487,7 +1487,7 @@
if (scsi_sg_count(cmd) && sbp2_map_scatterlist(orb, device, lu) < 0)
goto out;
- memcpy(orb->request.command_block, cmd->cmnd, COMMAND_SIZE(*cmd->cmnd));
+ memcpy(orb->request.command_block, cmd->cmnd, cmd->cmd_len);
orb->base.callback = complete_command_orb;
orb->base.request_bus =
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 5a99e81..93f9167 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -30,6 +30,8 @@
{ "pca9537", 4, },
{ "pca9538", 8, },
{ "pca9539", 16, },
+ { "pca9555", 16, },
+ { "pca9557", 8, },
/* REVISIT several pca955x parts should work here too */
{ }
};
@@ -193,7 +195,7 @@
{
struct pca953x_platform_data *pdata;
struct pca953x_chip *chip;
- int ret, i;
+ int ret;
pdata = client->dev.platform_data;
if (pdata == NULL)
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
index 9587869..c1009d6 100644
--- a/drivers/hwmon/adt7473.c
+++ b/drivers/hwmon/adt7473.c
@@ -422,18 +422,14 @@
* number in the range -128 to 127, or as an unsigned number that must
* be offset by 64.
*/
-static int decode_temp(struct adt7473_data *data, u8 raw)
+static int decode_temp(u8 twos_complement, u8 raw)
{
- if (data->temp_twos_complement)
- return (s8)raw;
- return raw - 64;
+ return twos_complement ? (s8)raw : raw - 64;
}
-static u8 encode_temp(struct adt7473_data *data, int cooked)
+static u8 encode_temp(u8 twos_complement, int cooked)
{
- if (data->temp_twos_complement)
- return (cooked & 0xFF);
- return cooked + 64;
+ return twos_complement ? cooked & 0xFF : cooked + 64;
}
static ssize_t show_temp_min(struct device *dev,
@@ -442,8 +438,9 @@
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adt7473_data *data = adt7473_update_device(dev);
- return sprintf(buf, "%d\n",
- 1000 * decode_temp(data, data->temp_min[attr->index]));
+ return sprintf(buf, "%d\n", 1000 * decode_temp(
+ data->temp_twos_complement,
+ data->temp_min[attr->index]));
}
static ssize_t set_temp_min(struct device *dev,
@@ -455,7 +452,7 @@
struct i2c_client *client = to_i2c_client(dev);
struct adt7473_data *data = i2c_get_clientdata(client);
int temp = simple_strtol(buf, NULL, 10) / 1000;
- temp = encode_temp(data, temp);
+ temp = encode_temp(data->temp_twos_complement, temp);
mutex_lock(&data->lock);
data->temp_min[attr->index] = temp;
@@ -472,8 +469,9 @@
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adt7473_data *data = adt7473_update_device(dev);
- return sprintf(buf, "%d\n",
- 1000 * decode_temp(data, data->temp_max[attr->index]));
+ return sprintf(buf, "%d\n", 1000 * decode_temp(
+ data->temp_twos_complement,
+ data->temp_max[attr->index]));
}
static ssize_t set_temp_max(struct device *dev,
@@ -485,7 +483,7 @@
struct i2c_client *client = to_i2c_client(dev);
struct adt7473_data *data = i2c_get_clientdata(client);
int temp = simple_strtol(buf, NULL, 10) / 1000;
- temp = encode_temp(data, temp);
+ temp = encode_temp(data->temp_twos_complement, temp);
mutex_lock(&data->lock);
data->temp_max[attr->index] = temp;
@@ -501,8 +499,9 @@
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adt7473_data *data = adt7473_update_device(dev);
- return sprintf(buf, "%d\n",
- 1000 * decode_temp(data, data->temp[attr->index]));
+ return sprintf(buf, "%d\n", 1000 * decode_temp(
+ data->temp_twos_complement,
+ data->temp[attr->index]));
}
static ssize_t show_fan_min(struct device *dev,
@@ -671,8 +670,9 @@
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adt7473_data *data = adt7473_update_device(dev);
- return sprintf(buf, "%d\n",
- 1000 * decode_temp(data, data->temp_tmax[attr->index]));
+ return sprintf(buf, "%d\n", 1000 * decode_temp(
+ data->temp_twos_complement,
+ data->temp_tmax[attr->index]));
}
static ssize_t set_temp_tmax(struct device *dev,
@@ -684,7 +684,7 @@
struct i2c_client *client = to_i2c_client(dev);
struct adt7473_data *data = i2c_get_clientdata(client);
int temp = simple_strtol(buf, NULL, 10) / 1000;
- temp = encode_temp(data, temp);
+ temp = encode_temp(data->temp_twos_complement, temp);
mutex_lock(&data->lock);
data->temp_tmax[attr->index] = temp;
@@ -701,8 +701,9 @@
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adt7473_data *data = adt7473_update_device(dev);
- return sprintf(buf, "%d\n",
- 1000 * decode_temp(data, data->temp_tmin[attr->index]));
+ return sprintf(buf, "%d\n", 1000 * decode_temp(
+ data->temp_twos_complement,
+ data->temp_tmin[attr->index]));
}
static ssize_t set_temp_tmin(struct device *dev,
@@ -714,7 +715,7 @@
struct i2c_client *client = to_i2c_client(dev);
struct adt7473_data *data = i2c_get_clientdata(client);
int temp = simple_strtol(buf, NULL, 10) / 1000;
- temp = encode_temp(data, temp);
+ temp = encode_temp(data->temp_twos_complement, temp);
mutex_lock(&data->lock);
data->temp_tmin[attr->index] = temp;
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index 84712a2..fe2eea4 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -953,12 +953,8 @@
static void asb100_init_client(struct i2c_client *client)
{
struct asb100_data *data = i2c_get_clientdata(client);
- int vid = 0;
- vid = asb100_read_value(client, ASB100_REG_VID_FANDIV) & 0x0f;
- vid |= (asb100_read_value(client, ASB100_REG_CHIPID) & 0x01) << 4;
data->vrm = vid_which_vrm();
- vid = vid_from_reg(vid, data->vrm);
/* Start monitoring */
asb100_write_value(client, ASB100_REG_CONFIG,
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 115f409..fa76969 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -248,7 +248,7 @@
/* All registers are word-sized, except for the configuration register.
LM75 uses a high-byte first convention, which is exactly opposite to
- the usual practice. */
+ the SMBus standard. */
static int lm75_read_value(struct i2c_client *client, u8 reg)
{
if (reg == LM75_REG_CONF)
@@ -257,9 +257,6 @@
return swab16(i2c_smbus_read_word_data(client, reg));
}
-/* All registers are word-sized, except for the configuration register.
- LM75 uses a high-byte first convention, which is exactly opposite to
- the usual practice. */
static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value)
{
if (reg == LM75_REG_CONF)
diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c
index f61d8f41..eb03544 100644
--- a/drivers/hwmon/smsc47b397.c
+++ b/drivers/hwmon/smsc47b397.c
@@ -335,11 +335,23 @@
static int __init smsc47b397_find(unsigned short *addr)
{
u8 id, rev;
+ char *name;
superio_enter();
id = force_id ? force_id : superio_inb(SUPERIO_REG_DEVID);
- if ((id != 0x6f) && (id != 0x81) && (id != 0x85)) {
+ switch(id) {
+ case 0x81:
+ name = "SCH5307-NS";
+ break;
+ case 0x6f:
+ name = "LPC47B397-NC";
+ break;
+ case 0x85:
+ case 0x8c:
+ name = "SCH5317";
+ break;
+ default:
superio_exit();
return -ENODEV;
}
@@ -352,8 +364,7 @@
printk(KERN_INFO DRVNAME ": found SMSC %s "
"(base address 0x%04x, revision %u)\n",
- id == 0x81 ? "SCH5307-NS" : id == 0x85 ? "SCH5317" :
- "LPC47B397-NC", *addr, rev);
+ name, *addr, rev);
superio_exit();
return 0;
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index ee35af9..ed3c019 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -1024,10 +1024,9 @@
SENSOR_ATTR_2(cpu0_vid, S_IRUGO, show_vid, NULL, NOT_USED, 0),
SENSOR_ATTR_2(cpu1_vid, S_IRUGO, show_vid, NULL, NOT_USED, 1),
};
+static DEVICE_ATTR(vrm, S_IWUSR | S_IRUGO, show_vrm, store_vrm);
static struct sensor_device_attribute_2 sda_single_files[] = {
- SENSOR_ATTR_2(vrm, S_IWUSR | S_IRUGO, show_vrm, store_vrm,
- NOT_USED, NOT_USED),
SENSOR_ATTR_2(chassis, S_IWUSR | S_IRUGO, show_alarm_beep,
store_chassis_clear, ALARM_STATUS, 30),
SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_beep_enable,
@@ -1080,6 +1079,7 @@
for (i = 0; i < ARRAY_SIZE(w83793_vid); i++)
device_remove_file(dev, &w83793_vid[i].dev_attr);
+ device_remove_file(dev, &dev_attr_vrm);
for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++)
device_remove_file(dev, &w83793_left_fan[i].dev_attr);
@@ -1282,7 +1282,6 @@
/* Initialize the chip */
w83793_init_client(client);
- data->vrm = vid_which_vrm();
/*
Only fan 1-5 has their own input pins,
Pwm 1-3 has their own pins
@@ -1293,7 +1292,9 @@
val = w83793_read_value(client, W83793_REG_FANIN_CTRL);
/* check the function of pins 49-56 */
- if (!(tmp & 0x80)) {
+ if (tmp & 0x80) {
+ data->has_vid |= 0x2; /* has VIDB */
+ } else {
data->has_pwm |= 0x18; /* pwm 4,5 */
if (val & 0x01) { /* fan 6 */
data->has_fan |= 0x20;
@@ -1309,13 +1310,15 @@
}
}
+ /* check the function of pins 37-40 */
+ if (!(tmp & 0x29))
+ data->has_vid |= 0x1; /* has VIDA */
if (0x08 == (tmp & 0x0c)) {
if (val & 0x08) /* fan 9 */
data->has_fan |= 0x100;
if (val & 0x10) /* fan 10 */
data->has_fan |= 0x200;
}
-
if (0x20 == (tmp & 0x30)) {
if (val & 0x20) /* fan 11 */
data->has_fan |= 0x400;
@@ -1359,13 +1362,6 @@
if (tmp & 0x02)
data->has_temp |= 0x20;
- /* Detect the VID usage and ignore unused input */
- tmp = w83793_read_value(client, W83793_REG_MFC);
- if (!(tmp & 0x29))
- data->has_vid |= 0x1; /* has VIDA */
- if (tmp & 0x80)
- data->has_vid |= 0x2; /* has VIDB */
-
/* Register sysfs hooks */
for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++) {
err = device_create_file(dev,
@@ -1381,6 +1377,12 @@
if (err)
goto exit_remove;
}
+ if (data->has_vid) {
+ data->vrm = vid_which_vrm();
+ err = device_create_file(dev, &dev_attr_vrm);
+ if (err)
+ goto exit_remove;
+ }
for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
err = device_create_file(dev, &sda_single_files[i].dev_attr);
diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c
index 77f2d48..52e268e 100644
--- a/drivers/hwmon/w83l785ts.c
+++ b/drivers/hwmon/w83l785ts.c
@@ -301,8 +301,8 @@
msleep(i);
}
- dev_err(&client->dev, "Couldn't read value from register 0x%02x. "
- "Please report.\n", reg);
+ dev_err(&client->dev, "Couldn't read value from register 0x%02x.\n",
+ reg);
return defval;
}
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index 491718f..cae9dc8 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -335,7 +335,7 @@
goto out_mem;
}
- priv->psc_base = r->start;
+ priv->psc_base = CKSEG1ADDR(r->start);
priv->xfer_timeout = 200;
priv->ack_timeout = 200;
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 18beb0a..a076129 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -99,7 +99,7 @@
u32 x;
int result = 0;
- if (i2c->irq == 0)
+ if (i2c->irq == NO_IRQ)
{
while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) {
schedule();
@@ -329,10 +329,9 @@
return -ENOMEM;
i2c->irq = platform_get_irq(pdev, 0);
- if (i2c->irq < 0) {
- result = -ENXIO;
- goto fail_get_irq;
- }
+ if (i2c->irq < 0)
+ i2c->irq = NO_IRQ; /* Use polling */
+
i2c->flags = pdata->device_flags;
init_waitqueue_head(&i2c->queue);
@@ -344,7 +343,7 @@
goto fail_map;
}
- if (i2c->irq != 0)
+ if (i2c->irq != NO_IRQ)
if ((result = request_irq(i2c->irq, mpc_i2c_isr,
IRQF_SHARED, "i2c-mpc", i2c)) < 0) {
printk(KERN_ERR
@@ -367,12 +366,11 @@
return result;
fail_add:
- if (i2c->irq != 0)
+ if (i2c->irq != NO_IRQ)
free_irq(i2c->irq, i2c);
fail_irq:
iounmap(i2c->base);
fail_map:
- fail_get_irq:
kfree(i2c);
return result;
};
@@ -384,7 +382,7 @@
i2c_del_adapter(&i2c->adap);
platform_set_drvdata(pdev, NULL);
- if (i2c->irq != 0)
+ if (i2c->irq != NO_IRQ)
free_irq(i2c->irq, i2c);
iounmap(i2c->base);
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index fdc9ad8..ac91659 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -104,10 +104,31 @@
static int piix4_transaction(void);
static unsigned short piix4_smba;
+static int srvrworks_csb5_delay;
static struct pci_driver piix4_driver;
static struct i2c_adapter piix4_adapter;
-static struct dmi_system_id __devinitdata piix4_dmi_table[] = {
+static struct dmi_system_id __devinitdata piix4_dmi_blacklist[] = {
+ {
+ .ident = "Sapphire AM2RD790",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SAPPHIRE Inc."),
+ DMI_MATCH(DMI_BOARD_NAME, "PC-AM2RD790"),
+ },
+ },
+ {
+ .ident = "DFI Lanparty UT 790FX",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "DFI Inc."),
+ DMI_MATCH(DMI_BOARD_NAME, "LP UT 790FX"),
+ },
+ },
+ { }
+};
+
+/* The IBM entry is in a separate table because we only check it
+ on Intel-based systems */
+static struct dmi_system_id __devinitdata piix4_dmi_ibm[] = {
{
.ident = "IBM",
.matches = { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), },
@@ -122,8 +143,20 @@
dev_info(&PIIX4_dev->dev, "Found %s device\n", pci_name(PIIX4_dev));
+ if ((PIIX4_dev->vendor == PCI_VENDOR_ID_SERVERWORKS) &&
+ (PIIX4_dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5))
+ srvrworks_csb5_delay = 1;
+
+ /* On some motherboards, it was reported that accessing the SMBus
+ caused severe hardware problems */
+ if (dmi_check_system(piix4_dmi_blacklist)) {
+ dev_err(&PIIX4_dev->dev,
+ "Accessing the SMBus on this system is unsafe!\n");
+ return -EPERM;
+ }
+
/* Don't access SMBus on IBM systems which get corrupted eeproms */
- if (dmi_check_system(piix4_dmi_table) &&
+ if (dmi_check_system(piix4_dmi_ibm) &&
PIIX4_dev->vendor == PCI_VENDOR_ID_INTEL) {
dev_err(&PIIX4_dev->dev, "IBM system detected; this module "
"may corrupt your serial eeprom! Refusing to load "
@@ -230,10 +263,14 @@
outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT);
/* We will always wait for a fraction of a second! (See PIIX4 docs errata) */
- do {
+ if (srvrworks_csb5_delay) /* Extra delay for SERVERWORKS_CSB5 */
+ msleep(2);
+ else
msleep(1);
- temp = inb_p(SMBHSTSTS);
- } while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
+
+ while ((timeout++ < MAX_TIMEOUT) &&
+ ((temp = inb_p(SMBHSTSTS)) & 0x01))
+ msleep(1);
/* If the SMBus is still busy, we give up */
if (timeout >= MAX_TIMEOUT) {
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
index 8fbbdb4c..114634d 100644
--- a/drivers/i2c/busses/i2c-sibyte.c
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -132,14 +132,14 @@
/*
* registering functions to load algorithms at runtime
*/
-int __init i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
+static int __init i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
{
struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
- /* register new adapter to i2c module... */
+ /* Register new adapter to i2c module... */
i2c_adap->algo = &i2c_sibyte_algo;
- /* Set the frequency to 100 kHz */
+ /* Set the requested frequency. */
csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ));
csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL));
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 26384da..c99ebea 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -327,6 +327,11 @@
EXPORT_SYMBOL_GPL(i2c_unregister_device);
+static const struct i2c_device_id dummy_id[] = {
+ { "dummy", 0 },
+ { },
+};
+
static int dummy_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -342,13 +347,13 @@
.driver.name = "dummy",
.probe = dummy_probe,
.remove = dummy_remove,
+ .id_table = dummy_id,
};
/**
* i2c_new_dummy - return a new i2c device bound to a dummy driver
* @adapter: the adapter managing the device
* @address: seven bit address to be used
- * @type: optional label used for i2c_client.name
* Context: can sleep
*
* This returns an I2C client bound to the "dummy" driver, intended for use
@@ -364,15 +369,12 @@
* i2c_unregister_device(); or NULL to indicate an error.
*/
struct i2c_client *
-i2c_new_dummy(struct i2c_adapter *adapter, u16 address, const char *type)
+i2c_new_dummy(struct i2c_adapter *adapter, u16 address)
{
struct i2c_board_info info = {
- .driver_name = "dummy",
- .addr = address,
+ I2C_BOARD_INFO("dummy", address),
};
- if (type)
- strlcpy(info.type, type, sizeof info.type);
return i2c_new_device(adapter, &info);
}
EXPORT_SYMBOL_GPL(i2c_new_dummy);
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 099a0fe..34b0d4f 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1347,19 +1347,14 @@
(d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS))
hwif->irq = port ? 15 : 14;
- hwif->host_flags = d->host_flags;
+ /* ->host_flags may be set by ->init_iops (or even earlier...) */
+ hwif->host_flags |= d->host_flags;
hwif->pio_mask = d->pio_mask;
/* ->set_pio_mode for DTC2278 is currently limited to port 0 */
if (hwif->chipset != ide_dtc2278 || hwif->channel == 0)
hwif->port_ops = d->port_ops;
- if ((d->host_flags & IDE_HFLAG_SERIALIZE) ||
- ((d->host_flags & IDE_HFLAG_SERIALIZE_DMA) && hwif->dma_base)) {
- if (hwif->mate)
- hwif->mate->serialized = hwif->serialized = 1;
- }
-
hwif->swdma_mask = d->swdma_mask;
hwif->mwdma_mask = d->mwdma_mask;
hwif->ultra_mask = d->udma_mask;
@@ -1381,6 +1376,12 @@
hwif->dma_ops = d->dma_ops;
}
+ if ((d->host_flags & IDE_HFLAG_SERIALIZE) ||
+ ((d->host_flags & IDE_HFLAG_SERIALIZE_DMA) && hwif->dma_base)) {
+ if (hwif->mate)
+ hwif->mate->serialized = hwif->serialized = 1;
+ }
+
if (d->host_flags & IDE_HFLAG_RQSIZE_256)
hwif->rqsize = 256;
diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c
index 83555ca..9e449a0 100644
--- a/drivers/ide/legacy/falconide.c
+++ b/drivers/ide/legacy/falconide.c
@@ -61,7 +61,7 @@
unsigned long data_addr = drive->hwif->io_ports.data_addr;
if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
- return outsw(data_adr, buf, (len + 1) / 2);
+ return outsw(data_addr, buf, (len + 1) / 2);
outsw_swapw(data_addr, buf, (len + 1) / 2);
}
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index 29d833e..05710c7 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -520,8 +520,11 @@
char *scratch = buf;
driver = container_of(drv, struct hpsb_protocol_driver, driver);
+ id = driver->id_table;
+ if (!id)
+ return 0;
- for (id = driver->id_table; id->match_flags != 0; id++) {
+ for (; id->match_flags != 0; id++) {
int need_coma = 0;
if (id->match_flags & IEEE1394_MATCH_VENDOR_ID) {
diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c
index ed2ee4b..ebf9d30 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_hal.c
+++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c
@@ -359,9 +359,10 @@
cq->sw_wptr++;
}
-void cxio_flush_rq(struct t3_wq *wq, struct t3_cq *cq, int count)
+int cxio_flush_rq(struct t3_wq *wq, struct t3_cq *cq, int count)
{
u32 ptr;
+ int flushed = 0;
PDBG("%s wq %p cq %p\n", __func__, wq, cq);
@@ -369,8 +370,11 @@
PDBG("%s rq_rptr %u rq_wptr %u skip count %u\n", __func__,
wq->rq_rptr, wq->rq_wptr, count);
ptr = wq->rq_rptr + count;
- while (ptr++ != wq->rq_wptr)
+ while (ptr++ != wq->rq_wptr) {
insert_recv_cqe(wq, cq);
+ flushed++;
+ }
+ return flushed;
}
static void insert_sq_cqe(struct t3_wq *wq, struct t3_cq *cq,
@@ -394,9 +398,10 @@
cq->sw_wptr++;
}
-void cxio_flush_sq(struct t3_wq *wq, struct t3_cq *cq, int count)
+int cxio_flush_sq(struct t3_wq *wq, struct t3_cq *cq, int count)
{
__u32 ptr;
+ int flushed = 0;
struct t3_swsq *sqp = wq->sq + Q_PTR2IDX(wq->sq_rptr, wq->sq_size_log2);
ptr = wq->sq_rptr + count;
@@ -405,7 +410,9 @@
insert_sq_cqe(wq, cq, sqp);
sqp++;
ptr++;
+ flushed++;
}
+ return flushed;
}
/*
@@ -581,7 +588,7 @@
* caller aquires the ctrl_qp lock before the call
*/
static int cxio_hal_ctrl_qp_write_mem(struct cxio_rdev *rdev_p, u32 addr,
- u32 len, void *data, int completion)
+ u32 len, void *data)
{
u32 i, nr_wqe, copy_len;
u8 *copy_data;
@@ -617,7 +624,7 @@
flag = 0;
if (i == (nr_wqe - 1)) {
/* last WQE */
- flag = completion ? T3_COMPLETION_FLAG : 0;
+ flag = T3_COMPLETION_FLAG;
if (len % 32)
utx_len = len / 32 + 1;
else
@@ -676,21 +683,20 @@
return 0;
}
-/* IN: stag key, pdid, perm, zbva, to, len, page_size, pbl, and pbl_size
- * OUT: stag index, actual pbl_size, pbl_addr allocated.
+/* IN: stag key, pdid, perm, zbva, to, len, page_size, pbl_size and pbl_addr
+ * OUT: stag index
* TBD: shared memory region support
*/
static int __cxio_tpt_op(struct cxio_rdev *rdev_p, u32 reset_tpt_entry,
u32 *stag, u8 stag_state, u32 pdid,
enum tpt_mem_type type, enum tpt_mem_perm perm,
- u32 zbva, u64 to, u32 len, u8 page_size, __be64 *pbl,
- u32 *pbl_size, u32 *pbl_addr)
+ u32 zbva, u64 to, u32 len, u8 page_size,
+ u32 pbl_size, u32 pbl_addr)
{
int err;
struct tpt_entry tpt;
u32 stag_idx;
u32 wptr;
- int rereg = (*stag != T3_STAG_UNSET);
stag_state = stag_state > 0;
stag_idx = (*stag) >> 8;
@@ -704,30 +710,8 @@
PDBG("%s stag_state 0x%0x type 0x%0x pdid 0x%0x, stag_idx 0x%x\n",
__func__, stag_state, type, pdid, stag_idx);
- if (reset_tpt_entry)
- cxio_hal_pblpool_free(rdev_p, *pbl_addr, *pbl_size << 3);
- else if (!rereg) {
- *pbl_addr = cxio_hal_pblpool_alloc(rdev_p, *pbl_size << 3);
- if (!*pbl_addr) {
- return -ENOMEM;
- }
- }
-
mutex_lock(&rdev_p->ctrl_qp.lock);
- /* write PBL first if any - update pbl only if pbl list exist */
- if (pbl) {
-
- PDBG("%s *pdb_addr 0x%x, pbl_base 0x%x, pbl_size %d\n",
- __func__, *pbl_addr, rdev_p->rnic_info.pbl_base,
- *pbl_size);
- err = cxio_hal_ctrl_qp_write_mem(rdev_p,
- (*pbl_addr >> 5),
- (*pbl_size << 3), pbl, 0);
- if (err)
- goto ret;
- }
-
/* write TPT entry */
if (reset_tpt_entry)
memset(&tpt, 0, sizeof(tpt));
@@ -742,23 +726,23 @@
V_TPT_ADDR_TYPE((zbva ? TPT_ZBTO : TPT_VATO)) |
V_TPT_PAGE_SIZE(page_size));
tpt.rsvd_pbl_addr = reset_tpt_entry ? 0 :
- cpu_to_be32(V_TPT_PBL_ADDR(PBL_OFF(rdev_p, *pbl_addr)>>3));
+ cpu_to_be32(V_TPT_PBL_ADDR(PBL_OFF(rdev_p, pbl_addr)>>3));
tpt.len = cpu_to_be32(len);
tpt.va_hi = cpu_to_be32((u32) (to >> 32));
tpt.va_low_or_fbo = cpu_to_be32((u32) (to & 0xFFFFFFFFULL));
tpt.rsvd_bind_cnt_or_pstag = 0;
tpt.rsvd_pbl_size = reset_tpt_entry ? 0 :
- cpu_to_be32(V_TPT_PBL_SIZE((*pbl_size) >> 2));
+ cpu_to_be32(V_TPT_PBL_SIZE(pbl_size >> 2));
}
err = cxio_hal_ctrl_qp_write_mem(rdev_p,
stag_idx +
(rdev_p->rnic_info.tpt_base >> 5),
- sizeof(tpt), &tpt, 1);
+ sizeof(tpt), &tpt);
/* release the stag index to free pool */
if (reset_tpt_entry)
cxio_hal_put_stag(rdev_p->rscp, stag_idx);
-ret:
+
wptr = rdev_p->ctrl_qp.wptr;
mutex_unlock(&rdev_p->ctrl_qp.lock);
if (!err)
@@ -769,44 +753,67 @@
return err;
}
+int cxio_write_pbl(struct cxio_rdev *rdev_p, __be64 *pbl,
+ u32 pbl_addr, u32 pbl_size)
+{
+ u32 wptr;
+ int err;
+
+ PDBG("%s *pdb_addr 0x%x, pbl_base 0x%x, pbl_size %d\n",
+ __func__, pbl_addr, rdev_p->rnic_info.pbl_base,
+ pbl_size);
+
+ mutex_lock(&rdev_p->ctrl_qp.lock);
+ err = cxio_hal_ctrl_qp_write_mem(rdev_p, pbl_addr >> 5, pbl_size << 3,
+ pbl);
+ wptr = rdev_p->ctrl_qp.wptr;
+ mutex_unlock(&rdev_p->ctrl_qp.lock);
+ if (err)
+ return err;
+
+ if (wait_event_interruptible(rdev_p->ctrl_qp.waitq,
+ SEQ32_GE(rdev_p->ctrl_qp.rptr,
+ wptr)))
+ return -ERESTARTSYS;
+
+ return 0;
+}
+
int cxio_register_phys_mem(struct cxio_rdev *rdev_p, u32 *stag, u32 pdid,
enum tpt_mem_perm perm, u32 zbva, u64 to, u32 len,
- u8 page_size, __be64 *pbl, u32 *pbl_size,
- u32 *pbl_addr)
+ u8 page_size, u32 pbl_size, u32 pbl_addr)
{
*stag = T3_STAG_UNSET;
return __cxio_tpt_op(rdev_p, 0, stag, 1, pdid, TPT_NON_SHARED_MR, perm,
- zbva, to, len, page_size, pbl, pbl_size, pbl_addr);
+ zbva, to, len, page_size, pbl_size, pbl_addr);
}
int cxio_reregister_phys_mem(struct cxio_rdev *rdev_p, u32 *stag, u32 pdid,
enum tpt_mem_perm perm, u32 zbva, u64 to, u32 len,
- u8 page_size, __be64 *pbl, u32 *pbl_size,
- u32 *pbl_addr)
+ u8 page_size, u32 pbl_size, u32 pbl_addr)
{
return __cxio_tpt_op(rdev_p, 0, stag, 1, pdid, TPT_NON_SHARED_MR, perm,
- zbva, to, len, page_size, pbl, pbl_size, pbl_addr);
+ zbva, to, len, page_size, pbl_size, pbl_addr);
}
int cxio_dereg_mem(struct cxio_rdev *rdev_p, u32 stag, u32 pbl_size,
u32 pbl_addr)
{
- return __cxio_tpt_op(rdev_p, 1, &stag, 0, 0, 0, 0, 0, 0ULL, 0, 0, NULL,
- &pbl_size, &pbl_addr);
+ return __cxio_tpt_op(rdev_p, 1, &stag, 0, 0, 0, 0, 0, 0ULL, 0, 0,
+ pbl_size, pbl_addr);
}
int cxio_allocate_window(struct cxio_rdev *rdev_p, u32 * stag, u32 pdid)
{
- u32 pbl_size = 0;
*stag = T3_STAG_UNSET;
return __cxio_tpt_op(rdev_p, 0, stag, 0, pdid, TPT_MW, 0, 0, 0ULL, 0, 0,
- NULL, &pbl_size, NULL);
+ 0, 0);
}
int cxio_deallocate_window(struct cxio_rdev *rdev_p, u32 stag)
{
- return __cxio_tpt_op(rdev_p, 1, &stag, 0, 0, 0, 0, 0, 0ULL, 0, 0, NULL,
- NULL, NULL);
+ return __cxio_tpt_op(rdev_p, 1, &stag, 0, 0, 0, 0, 0, 0ULL, 0, 0,
+ 0, 0);
}
int cxio_rdma_init(struct cxio_rdev *rdev_p, struct t3_rdma_init_attr *attr)
diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.h b/drivers/infiniband/hw/cxgb3/cxio_hal.h
index 2bcff7f..6e128f6 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_hal.h
+++ b/drivers/infiniband/hw/cxgb3/cxio_hal.h
@@ -154,14 +154,14 @@
int cxio_destroy_qp(struct cxio_rdev *rdev, struct t3_wq *wq,
struct cxio_ucontext *uctx);
int cxio_peek_cq(struct t3_wq *wr, struct t3_cq *cq, int opcode);
+int cxio_write_pbl(struct cxio_rdev *rdev_p, __be64 *pbl,
+ u32 pbl_addr, u32 pbl_size);
int cxio_register_phys_mem(struct cxio_rdev *rdev, u32 * stag, u32 pdid,
enum tpt_mem_perm perm, u32 zbva, u64 to, u32 len,
- u8 page_size, __be64 *pbl, u32 *pbl_size,
- u32 *pbl_addr);
+ u8 page_size, u32 pbl_size, u32 pbl_addr);
int cxio_reregister_phys_mem(struct cxio_rdev *rdev, u32 * stag, u32 pdid,
enum tpt_mem_perm perm, u32 zbva, u64 to, u32 len,
- u8 page_size, __be64 *pbl, u32 *pbl_size,
- u32 *pbl_addr);
+ u8 page_size, u32 pbl_size, u32 pbl_addr);
int cxio_dereg_mem(struct cxio_rdev *rdev, u32 stag, u32 pbl_size,
u32 pbl_addr);
int cxio_allocate_window(struct cxio_rdev *rdev, u32 * stag, u32 pdid);
@@ -173,8 +173,8 @@
void cxio_hal_put_pdid(struct cxio_hal_resource *rscp, u32 pdid);
int __init cxio_hal_init(void);
void __exit cxio_hal_exit(void);
-void cxio_flush_rq(struct t3_wq *wq, struct t3_cq *cq, int count);
-void cxio_flush_sq(struct t3_wq *wq, struct t3_cq *cq, int count);
+int cxio_flush_rq(struct t3_wq *wq, struct t3_cq *cq, int count);
+int cxio_flush_sq(struct t3_wq *wq, struct t3_cq *cq, int count);
void cxio_count_rcqes(struct t3_cq *cq, struct t3_wq *wq, int *count);
void cxio_count_scqes(struct t3_cq *cq, struct t3_wq *wq, int *count);
void cxio_flush_hw_cq(struct t3_cq *cq);
diff --git a/drivers/infiniband/hw/cxgb3/cxio_resource.c b/drivers/infiniband/hw/cxgb3/cxio_resource.c
index 45ed4f2..bd233c0 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_resource.c
+++ b/drivers/infiniband/hw/cxgb3/cxio_resource.c
@@ -250,7 +250,6 @@
*/
#define MIN_PBL_SHIFT 8 /* 256B == min PBL size (32 entries) */
-#define PBL_CHUNK 2*1024*1024
u32 cxio_hal_pblpool_alloc(struct cxio_rdev *rdev_p, int size)
{
@@ -267,14 +266,35 @@
int cxio_hal_pblpool_create(struct cxio_rdev *rdev_p)
{
- unsigned long i;
+ unsigned pbl_start, pbl_chunk;
+
rdev_p->pbl_pool = gen_pool_create(MIN_PBL_SHIFT, -1);
- if (rdev_p->pbl_pool)
- for (i = rdev_p->rnic_info.pbl_base;
- i <= rdev_p->rnic_info.pbl_top - PBL_CHUNK + 1;
- i += PBL_CHUNK)
- gen_pool_add(rdev_p->pbl_pool, i, PBL_CHUNK, -1);
- return rdev_p->pbl_pool ? 0 : -ENOMEM;
+ if (!rdev_p->pbl_pool)
+ return -ENOMEM;
+
+ pbl_start = rdev_p->rnic_info.pbl_base;
+ pbl_chunk = rdev_p->rnic_info.pbl_top - pbl_start + 1;
+
+ while (pbl_start < rdev_p->rnic_info.pbl_top) {
+ pbl_chunk = min(rdev_p->rnic_info.pbl_top - pbl_start + 1,
+ pbl_chunk);
+ if (gen_pool_add(rdev_p->pbl_pool, pbl_start, pbl_chunk, -1)) {
+ PDBG("%s failed to add PBL chunk (%x/%x)\n",
+ __func__, pbl_start, pbl_chunk);
+ if (pbl_chunk <= 1024 << MIN_PBL_SHIFT) {
+ printk(KERN_WARNING MOD "%s: Failed to add all PBL chunks (%x/%x)\n",
+ __func__, pbl_start, rdev_p->rnic_info.pbl_top - pbl_start);
+ return 0;
+ }
+ pbl_chunk >>= 1;
+ } else {
+ PDBG("%s added PBL chunk (%x/%x)\n",
+ __func__, pbl_start, pbl_chunk);
+ pbl_start += pbl_chunk;
+ }
+ }
+
+ return 0;
}
void cxio_hal_pblpool_destroy(struct cxio_rdev *rdev_p)
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c
index d44a6df..c325c44 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c
@@ -67,10 +67,10 @@
module_param(peer2peer, int, 0644);
MODULE_PARM_DESC(peer2peer, "Support peer2peer ULPs (default=0)");
-static int ep_timeout_secs = 10;
+static int ep_timeout_secs = 60;
module_param(ep_timeout_secs, int, 0644);
MODULE_PARM_DESC(ep_timeout_secs, "CM Endpoint operation timeout "
- "in seconds (default=10)");
+ "in seconds (default=60)");
static int mpa_rev = 1;
module_param(mpa_rev, int, 0644);
@@ -1650,8 +1650,8 @@
release = 1;
break;
case ABORTING:
- break;
case DEAD:
+ break;
default:
BUG_ON(1);
break;
diff --git a/drivers/infiniband/hw/cxgb3/iwch_mem.c b/drivers/infiniband/hw/cxgb3/iwch_mem.c
index 58c3d61..ec49a5c 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_mem.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_mem.c
@@ -35,17 +35,26 @@
#include <rdma/ib_verbs.h>
#include "cxio_hal.h"
+#include "cxio_resource.h"
#include "iwch.h"
#include "iwch_provider.h"
-int iwch_register_mem(struct iwch_dev *rhp, struct iwch_pd *php,
- struct iwch_mr *mhp,
- int shift,
- __be64 *page_list)
+static void iwch_finish_mem_reg(struct iwch_mr *mhp, u32 stag)
{
- u32 stag;
u32 mmid;
+ mhp->attr.state = 1;
+ mhp->attr.stag = stag;
+ mmid = stag >> 8;
+ mhp->ibmr.rkey = mhp->ibmr.lkey = stag;
+ insert_handle(mhp->rhp, &mhp->rhp->mmidr, mhp, mmid);
+ PDBG("%s mmid 0x%x mhp %p\n", __func__, mmid, mhp);
+}
+
+int iwch_register_mem(struct iwch_dev *rhp, struct iwch_pd *php,
+ struct iwch_mr *mhp, int shift)
+{
+ u32 stag;
if (cxio_register_phys_mem(&rhp->rdev,
&stag, mhp->attr.pdid,
@@ -53,28 +62,21 @@
mhp->attr.zbva,
mhp->attr.va_fbo,
mhp->attr.len,
- shift-12,
- page_list,
- &mhp->attr.pbl_size, &mhp->attr.pbl_addr))
+ shift - 12,
+ mhp->attr.pbl_size, mhp->attr.pbl_addr))
return -ENOMEM;
- mhp->attr.state = 1;
- mhp->attr.stag = stag;
- mmid = stag >> 8;
- mhp->ibmr.rkey = mhp->ibmr.lkey = stag;
- insert_handle(rhp, &rhp->mmidr, mhp, mmid);
- PDBG("%s mmid 0x%x mhp %p\n", __func__, mmid, mhp);
+
+ iwch_finish_mem_reg(mhp, stag);
+
return 0;
}
int iwch_reregister_mem(struct iwch_dev *rhp, struct iwch_pd *php,
struct iwch_mr *mhp,
int shift,
- __be64 *page_list,
int npages)
{
u32 stag;
- u32 mmid;
-
/* We could support this... */
if (npages > mhp->attr.pbl_size)
@@ -87,19 +89,40 @@
mhp->attr.zbva,
mhp->attr.va_fbo,
mhp->attr.len,
- shift-12,
- page_list,
- &mhp->attr.pbl_size, &mhp->attr.pbl_addr))
+ shift - 12,
+ mhp->attr.pbl_size, mhp->attr.pbl_addr))
return -ENOMEM;
- mhp->attr.state = 1;
- mhp->attr.stag = stag;
- mmid = stag >> 8;
- mhp->ibmr.rkey = mhp->ibmr.lkey = stag;
- insert_handle(rhp, &rhp->mmidr, mhp, mmid);
- PDBG("%s mmid 0x%x mhp %p\n", __func__, mmid, mhp);
+
+ iwch_finish_mem_reg(mhp, stag);
+
return 0;
}
+int iwch_alloc_pbl(struct iwch_mr *mhp, int npages)
+{
+ mhp->attr.pbl_addr = cxio_hal_pblpool_alloc(&mhp->rhp->rdev,
+ npages << 3);
+
+ if (!mhp->attr.pbl_addr)
+ return -ENOMEM;
+
+ mhp->attr.pbl_size = npages;
+
+ return 0;
+}
+
+void iwch_free_pbl(struct iwch_mr *mhp)
+{
+ cxio_hal_pblpool_free(&mhp->rhp->rdev, mhp->attr.pbl_addr,
+ mhp->attr.pbl_size << 3);
+}
+
+int iwch_write_pbl(struct iwch_mr *mhp, __be64 *pages, int npages, int offset)
+{
+ return cxio_write_pbl(&mhp->rhp->rdev, pages,
+ mhp->attr.pbl_addr + (offset << 3), npages);
+}
+
int build_phys_page_list(struct ib_phys_buf *buffer_list,
int num_phys_buf,
u64 *iova_start,
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c
index d07d3a3..8934178 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c
@@ -442,6 +442,7 @@
mmid = mhp->attr.stag >> 8;
cxio_dereg_mem(&rhp->rdev, mhp->attr.stag, mhp->attr.pbl_size,
mhp->attr.pbl_addr);
+ iwch_free_pbl(mhp);
remove_handle(rhp, &rhp->mmidr, mmid);
if (mhp->kva)
kfree((void *) (unsigned long) mhp->kva);
@@ -475,6 +476,8 @@
if (!mhp)
return ERR_PTR(-ENOMEM);
+ mhp->rhp = rhp;
+
/* First check that we have enough alignment */
if ((*iova_start & ~PAGE_MASK) != (buffer_list[0].addr & ~PAGE_MASK)) {
ret = -EINVAL;
@@ -492,7 +495,17 @@
if (ret)
goto err;
- mhp->rhp = rhp;
+ ret = iwch_alloc_pbl(mhp, npages);
+ if (ret) {
+ kfree(page_list);
+ goto err_pbl;
+ }
+
+ ret = iwch_write_pbl(mhp, page_list, npages, 0);
+ kfree(page_list);
+ if (ret)
+ goto err_pbl;
+
mhp->attr.pdid = php->pdid;
mhp->attr.zbva = 0;
@@ -502,12 +515,15 @@
mhp->attr.len = (u32) total_size;
mhp->attr.pbl_size = npages;
- ret = iwch_register_mem(rhp, php, mhp, shift, page_list);
- kfree(page_list);
- if (ret) {
- goto err;
- }
+ ret = iwch_register_mem(rhp, php, mhp, shift);
+ if (ret)
+ goto err_pbl;
+
return &mhp->ibmr;
+
+err_pbl:
+ iwch_free_pbl(mhp);
+
err:
kfree(mhp);
return ERR_PTR(ret);
@@ -560,7 +576,7 @@
return ret;
}
- ret = iwch_reregister_mem(rhp, php, &mh, shift, page_list, npages);
+ ret = iwch_reregister_mem(rhp, php, &mh, shift, npages);
kfree(page_list);
if (ret) {
return ret;
@@ -602,6 +618,8 @@
if (!mhp)
return ERR_PTR(-ENOMEM);
+ mhp->rhp = rhp;
+
mhp->umem = ib_umem_get(pd->uobject->context, start, length, acc, 0);
if (IS_ERR(mhp->umem)) {
err = PTR_ERR(mhp->umem);
@@ -615,10 +633,14 @@
list_for_each_entry(chunk, &mhp->umem->chunk_list, list)
n += chunk->nents;
- pages = kmalloc(n * sizeof(u64), GFP_KERNEL);
+ err = iwch_alloc_pbl(mhp, n);
+ if (err)
+ goto err;
+
+ pages = (__be64 *) __get_free_page(GFP_KERNEL);
if (!pages) {
err = -ENOMEM;
- goto err;
+ goto err_pbl;
}
i = n = 0;
@@ -630,25 +652,38 @@
pages[i++] = cpu_to_be64(sg_dma_address(
&chunk->page_list[j]) +
mhp->umem->page_size * k);
+ if (i == PAGE_SIZE / sizeof *pages) {
+ err = iwch_write_pbl(mhp, pages, i, n);
+ if (err)
+ goto pbl_done;
+ n += i;
+ i = 0;
+ }
}
}
- mhp->rhp = rhp;
+ if (i)
+ err = iwch_write_pbl(mhp, pages, i, n);
+
+pbl_done:
+ free_page((unsigned long) pages);
+ if (err)
+ goto err_pbl;
+
mhp->attr.pdid = php->pdid;
mhp->attr.zbva = 0;
mhp->attr.perms = iwch_ib_to_tpt_access(acc);
mhp->attr.va_fbo = virt;
mhp->attr.page_size = shift - 12;
mhp->attr.len = (u32) length;
- mhp->attr.pbl_size = i;
- err = iwch_register_mem(rhp, php, mhp, shift, pages);
- kfree(pages);
+
+ err = iwch_register_mem(rhp, php, mhp, shift);
if (err)
- goto err;
+ goto err_pbl;
if (udata && !t3a_device(rhp)) {
uresp.pbl_addr = (mhp->attr.pbl_addr -
- rhp->rdev.rnic_info.pbl_base) >> 3;
+ rhp->rdev.rnic_info.pbl_base) >> 3;
PDBG("%s user resp pbl_addr 0x%x\n", __func__,
uresp.pbl_addr);
@@ -661,6 +696,9 @@
return &mhp->ibmr;
+err_pbl:
+ iwch_free_pbl(mhp);
+
err:
ib_umem_release(mhp->umem);
kfree(mhp);
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.h b/drivers/infiniband/hw/cxgb3/iwch_provider.h
index db5100d..836163f 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.h
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.h
@@ -340,14 +340,14 @@
int iwch_resume_qps(struct iwch_cq *chp);
void stop_read_rep_timer(struct iwch_qp *qhp);
int iwch_register_mem(struct iwch_dev *rhp, struct iwch_pd *php,
- struct iwch_mr *mhp,
- int shift,
- __be64 *page_list);
+ struct iwch_mr *mhp, int shift);
int iwch_reregister_mem(struct iwch_dev *rhp, struct iwch_pd *php,
struct iwch_mr *mhp,
int shift,
- __be64 *page_list,
int npages);
+int iwch_alloc_pbl(struct iwch_mr *mhp, int npages);
+void iwch_free_pbl(struct iwch_mr *mhp);
+int iwch_write_pbl(struct iwch_mr *mhp, __be64 *pages, int npages, int offset);
int build_phys_page_list(struct ib_phys_buf *buffer_list,
int num_phys_buf,
u64 *iova_start,
diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c
index 9b4be88..79dbe5b 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_qp.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c
@@ -655,6 +655,7 @@
{
struct iwch_cq *rchp, *schp;
int count;
+ int flushed;
rchp = get_chp(qhp->rhp, qhp->attr.rcq);
schp = get_chp(qhp->rhp, qhp->attr.scq);
@@ -669,20 +670,22 @@
spin_lock(&qhp->lock);
cxio_flush_hw_cq(&rchp->cq);
cxio_count_rcqes(&rchp->cq, &qhp->wq, &count);
- cxio_flush_rq(&qhp->wq, &rchp->cq, count);
+ flushed = cxio_flush_rq(&qhp->wq, &rchp->cq, count);
spin_unlock(&qhp->lock);
spin_unlock_irqrestore(&rchp->lock, *flag);
- (*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context);
+ if (flushed)
+ (*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context);
/* locking heirarchy: cq lock first, then qp lock. */
spin_lock_irqsave(&schp->lock, *flag);
spin_lock(&qhp->lock);
cxio_flush_hw_cq(&schp->cq);
cxio_count_scqes(&schp->cq, &qhp->wq, &count);
- cxio_flush_sq(&qhp->wq, &schp->cq, count);
+ flushed = cxio_flush_sq(&qhp->wq, &schp->cq, count);
spin_unlock(&qhp->lock);
spin_unlock_irqrestore(&schp->lock, *flag);
- (*schp->ibcq.comp_handler)(&schp->ibcq, schp->ibcq.cq_context);
+ if (flushed)
+ (*schp->ibcq.comp_handler)(&schp->ibcq, schp->ibcq.cq_context);
/* deref */
if (atomic_dec_and_test(&qhp->refcnt))
@@ -880,7 +883,6 @@
ep = qhp->ep;
get_ep(&ep->com);
}
- flush_qp(qhp, &flag);
break;
case IWCH_QP_STATE_TERMINATE:
qhp->attr.state = IWCH_QP_STATE_TERMINATE;
@@ -911,6 +913,7 @@
}
switch (attrs->next_state) {
case IWCH_QP_STATE_IDLE:
+ flush_qp(qhp, &flag);
qhp->attr.state = IWCH_QP_STATE_IDLE;
qhp->attr.llp_stream_handle = NULL;
put_ep(&qhp->ep->com);
diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h
index 00bab60..1e9e99a 100644
--- a/drivers/infiniband/hw/ehca/ehca_classes.h
+++ b/drivers/infiniband/hw/ehca/ehca_classes.h
@@ -192,6 +192,8 @@
int mtu_shift;
u32 message_count;
u32 packet_count;
+ atomic_t nr_events; /* events seen */
+ wait_queue_head_t wait_completion;
};
#define IS_SRQ(qp) (qp->ext_type == EQPT_SRQ)
diff --git a/drivers/infiniband/hw/ehca/ehca_hca.c b/drivers/infiniband/hw/ehca/ehca_hca.c
index 2515cbde..bc3b37d 100644
--- a/drivers/infiniband/hw/ehca/ehca_hca.c
+++ b/drivers/infiniband/hw/ehca/ehca_hca.c
@@ -101,7 +101,6 @@
props->max_ee = limit_uint(rblock->max_rd_ee_context);
props->max_rdd = limit_uint(rblock->max_rd_domain);
props->max_fmr = limit_uint(rblock->max_mr);
- props->local_ca_ack_delay = limit_uint(rblock->local_ca_ack_delay);
props->max_qp_rd_atom = limit_uint(rblock->max_rr_qp);
props->max_ee_rd_atom = limit_uint(rblock->max_rr_ee_context);
props->max_res_rd_atom = limit_uint(rblock->max_rr_hca);
@@ -115,7 +114,7 @@
}
props->max_pkeys = 16;
- props->local_ca_ack_delay = limit_uint(rblock->local_ca_ack_delay);
+ props->local_ca_ack_delay = min_t(u8, rblock->local_ca_ack_delay, 255);
props->max_raw_ipv6_qp = limit_uint(rblock->max_raw_ipv6_qp);
props->max_raw_ethy_qp = limit_uint(rblock->max_raw_ethy_qp);
props->max_mcast_grp = limit_uint(rblock->max_mcast_grp);
@@ -136,7 +135,7 @@
return ret;
}
-static int map_mtu(struct ehca_shca *shca, u32 fw_mtu)
+static enum ib_mtu map_mtu(struct ehca_shca *shca, u32 fw_mtu)
{
switch (fw_mtu) {
case 0x1:
@@ -156,7 +155,7 @@
}
}
-static int map_number_of_vls(struct ehca_shca *shca, u32 vl_cap)
+static u8 map_number_of_vls(struct ehca_shca *shca, u32 vl_cap)
{
switch (vl_cap) {
case 0x1:
diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c
index ca5eb0c..ce1ab05 100644
--- a/drivers/infiniband/hw/ehca/ehca_irq.c
+++ b/drivers/infiniband/hw/ehca/ehca_irq.c
@@ -204,6 +204,8 @@
read_lock(&ehca_qp_idr_lock);
qp = idr_find(&ehca_qp_idr, token);
+ if (qp)
+ atomic_inc(&qp->nr_events);
read_unlock(&ehca_qp_idr_lock);
if (!qp)
@@ -223,6 +225,8 @@
if (fatal && qp->ext_type == EQPT_SRQBASE)
dispatch_qp_event(shca, qp, IB_EVENT_QP_LAST_WQE_REACHED);
+ if (atomic_dec_and_test(&qp->nr_events))
+ wake_up(&qp->wait_completion);
return;
}
diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c
index 18fba92..3f59587 100644
--- a/drivers/infiniband/hw/ehca/ehca_qp.c
+++ b/drivers/infiniband/hw/ehca/ehca_qp.c
@@ -566,6 +566,8 @@
return ERR_PTR(-ENOMEM);
}
+ atomic_set(&my_qp->nr_events, 0);
+ init_waitqueue_head(&my_qp->wait_completion);
spin_lock_init(&my_qp->spinlock_s);
spin_lock_init(&my_qp->spinlock_r);
my_qp->qp_type = qp_type;
@@ -1934,6 +1936,9 @@
idr_remove(&ehca_qp_idr, my_qp->token);
write_unlock_irqrestore(&ehca_qp_idr_lock, flags);
+ /* now wait until all pending events have completed */
+ wait_event(my_qp->wait_completion, !atomic_read(&my_qp->nr_events));
+
h_ret = hipz_h_destroy_qp(shca->ipz_hca_handle, my_qp);
if (h_ret != H_SUCCESS) {
ehca_err(dev, "hipz_h_destroy_qp() failed h_ret=%li "
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index acf30c0..ce7b7c3 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -1197,7 +1197,7 @@
}
reloop:
- for (last = 0, i = 1; !last; i++) {
+ for (last = 0, i = 1; !last; i += !last) {
hdr = dd->ipath_f_get_msgheader(dd, rhf_addr);
eflags = ipath_hdrget_err_flags(rhf_addr);
etype = ipath_hdrget_rcv_type(rhf_addr);
@@ -1428,6 +1428,40 @@
spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
}
+/*
+ * used to force update of pioavailshadow if we can't get a pio buffer.
+ * Needed primarily due to exitting freeze mode after recovering
+ * from errors. Done lazily, because it's safer (known to not
+ * be writing pio buffers).
+ */
+static void ipath_reset_availshadow(struct ipath_devdata *dd)
+{
+ int i, im;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ipath_pioavail_lock, flags);
+ for (i = 0; i < dd->ipath_pioavregs; i++) {
+ u64 val, oldval;
+ /* deal with 6110 chip bug on high register #s */
+ im = (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) ?
+ i ^ 1 : i;
+ val = le64_to_cpu(dd->ipath_pioavailregs_dma[im]);
+ /*
+ * busy out the buffers not in the kernel avail list,
+ * without changing the generation bits.
+ */
+ oldval = dd->ipath_pioavailshadow[i];
+ dd->ipath_pioavailshadow[i] = val |
+ ((~dd->ipath_pioavailkernel[i] <<
+ INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT) &
+ 0xaaaaaaaaaaaaaaaaULL); /* All BUSY bits in qword */
+ if (oldval != dd->ipath_pioavailshadow[i])
+ ipath_dbg("shadow[%d] was %Lx, now %lx\n",
+ i, oldval, dd->ipath_pioavailshadow[i]);
+ }
+ spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
+}
+
/**
* ipath_setrcvhdrsize - set the receive header size
* @dd: the infinipath device
@@ -1482,9 +1516,12 @@
*/
ipath_stats.sps_nopiobufs++;
if (!(++dd->ipath_consec_nopiobuf % 100000)) {
- ipath_dbg("%u pio sends with no bufavail; dmacopy: "
- "%llx %llx %llx %llx; shadow: %lx %lx %lx %lx\n",
+ ipath_force_pio_avail_update(dd); /* at start */
+ ipath_dbg("%u tries no piobufavail ts%lx; dmacopy: "
+ "%llx %llx %llx %llx\n"
+ "ipath shadow: %lx %lx %lx %lx\n",
dd->ipath_consec_nopiobuf,
+ (unsigned long)get_cycles(),
(unsigned long long) le64_to_cpu(dma[0]),
(unsigned long long) le64_to_cpu(dma[1]),
(unsigned long long) le64_to_cpu(dma[2]),
@@ -1496,14 +1533,17 @@
*/
if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) >
(sizeof(shadow[0]) * 4 * 4))
- ipath_dbg("2nd group: dmacopy: %llx %llx "
- "%llx %llx; shadow: %lx %lx %lx %lx\n",
+ ipath_dbg("2nd group: dmacopy: "
+ "%llx %llx %llx %llx\n"
+ "ipath shadow: %lx %lx %lx %lx\n",
(unsigned long long)le64_to_cpu(dma[4]),
(unsigned long long)le64_to_cpu(dma[5]),
(unsigned long long)le64_to_cpu(dma[6]),
(unsigned long long)le64_to_cpu(dma[7]),
- shadow[4], shadow[5], shadow[6],
- shadow[7]);
+ shadow[4], shadow[5], shadow[6], shadow[7]);
+
+ /* at end, so update likely happened */
+ ipath_reset_availshadow(dd);
}
}
@@ -1652,19 +1692,46 @@
unsigned len, int avail)
{
unsigned long flags;
- unsigned end;
+ unsigned end, cnt = 0, next;
/* There are two bits per send buffer (busy and generation) */
start *= 2;
- len *= 2;
- end = start + len;
+ end = start + len * 2;
- /* Set or clear the generation bits. */
spin_lock_irqsave(&ipath_pioavail_lock, flags);
+ /* Set or clear the busy bit in the shadow. */
while (start < end) {
if (avail) {
- __clear_bit(start + INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT,
- dd->ipath_pioavailshadow);
+ unsigned long dma;
+ int i, im;
+ /*
+ * the BUSY bit will never be set, because we disarm
+ * the user buffers before we hand them back to the
+ * kernel. We do have to make sure the generation
+ * bit is set correctly in shadow, since it could
+ * have changed many times while allocated to user.
+ * We can't use the bitmap functions on the full
+ * dma array because it is always little-endian, so
+ * we have to flip to host-order first.
+ * BITS_PER_LONG is slightly wrong, since it's
+ * always 64 bits per register in chip...
+ * We only work on 64 bit kernels, so that's OK.
+ */
+ /* deal with 6110 chip bug on high register #s */
+ i = start / BITS_PER_LONG;
+ im = (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) ?
+ i ^ 1 : i;
+ __clear_bit(INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT
+ + start, dd->ipath_pioavailshadow);
+ dma = (unsigned long) le64_to_cpu(
+ dd->ipath_pioavailregs_dma[im]);
+ if (test_bit((INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT
+ + start) % BITS_PER_LONG, &dma))
+ __set_bit(INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT
+ + start, dd->ipath_pioavailshadow);
+ else
+ __clear_bit(INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT
+ + start, dd->ipath_pioavailshadow);
__set_bit(start, dd->ipath_pioavailkernel);
} else {
__set_bit(start + INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT,
@@ -1673,7 +1740,44 @@
}
start += 2;
}
+
+ if (dd->ipath_pioupd_thresh) {
+ end = 2 * (dd->ipath_piobcnt2k + dd->ipath_piobcnt4k);
+ next = find_first_bit(dd->ipath_pioavailkernel, end);
+ while (next < end) {
+ cnt++;
+ next = find_next_bit(dd->ipath_pioavailkernel, end,
+ next + 1);
+ }
+ }
spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
+
+ /*
+ * When moving buffers from kernel to user, if number assigned to
+ * the user is less than the pio update threshold, and threshold
+ * is supported (cnt was computed > 0), drop the update threshold
+ * so we update at least once per allocated number of buffers.
+ * In any case, if the kernel buffers are less than the threshold,
+ * drop the threshold. We don't bother increasing it, having once
+ * decreased it, since it would typically just cycle back and forth.
+ * If we don't decrease below buffers in use, we can wait a long
+ * time for an update, until some other context uses PIO buffers.
+ */
+ if (!avail && len < cnt)
+ cnt = len;
+ if (cnt < dd->ipath_pioupd_thresh) {
+ dd->ipath_pioupd_thresh = cnt;
+ ipath_dbg("Decreased pio update threshold to %u\n",
+ dd->ipath_pioupd_thresh);
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl &= ~(INFINIPATH_S_UPDTHRESH_MASK
+ << INFINIPATH_S_UPDTHRESH_SHIFT);
+ dd->ipath_sendctrl |= dd->ipath_pioupd_thresh
+ << INFINIPATH_S_UPDTHRESH_SHIFT;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+ }
}
/**
@@ -1794,8 +1898,8 @@
spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
skip_cancel =
- !test_bit(IPATH_SDMA_DISABLED, statp) &&
- test_and_set_bit(IPATH_SDMA_ABORTING, statp);
+ test_and_set_bit(IPATH_SDMA_ABORTING, statp)
+ && !test_bit(IPATH_SDMA_DISABLED, statp);
spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
if (skip_cancel)
goto bail;
@@ -1826,6 +1930,9 @@
ipath_disarm_piobufs(dd, 0,
dd->ipath_piobcnt2k + dd->ipath_piobcnt4k);
+ if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
+ set_bit(IPATH_SDMA_DISARMED, &dd->ipath_sdma_status);
+
if (restore_sendctrl) {
/* else done by caller later if needed */
spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
@@ -1845,7 +1952,6 @@
/* only wait so long for intr */
dd->ipath_sdma_abort_intr_timeout = jiffies + HZ;
dd->ipath_sdma_reset_wait = 200;
- __set_bit(IPATH_SDMA_DISARMED, &dd->ipath_sdma_status);
if (!test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
tasklet_hi_schedule(&dd->ipath_sdma_abort_task);
spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c
index 8b17522..3295177 100644
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c
@@ -173,47 +173,25 @@
(void *) dd->ipath_statusp -
(void *) dd->ipath_pioavailregs_dma;
if (!shared) {
- kinfo->spi_piocnt = dd->ipath_pbufsport;
+ kinfo->spi_piocnt = pd->port_piocnt;
kinfo->spi_piobufbase = (u64) pd->port_piobufs;
kinfo->__spi_uregbase = (u64) dd->ipath_uregbase +
dd->ipath_ureg_align * pd->port_port;
} else if (master) {
- kinfo->spi_piocnt = (dd->ipath_pbufsport / subport_cnt) +
- (dd->ipath_pbufsport % subport_cnt);
+ kinfo->spi_piocnt = (pd->port_piocnt / subport_cnt) +
+ (pd->port_piocnt % subport_cnt);
/* Master's PIO buffers are after all the slave's */
kinfo->spi_piobufbase = (u64) pd->port_piobufs +
dd->ipath_palign *
- (dd->ipath_pbufsport - kinfo->spi_piocnt);
+ (pd->port_piocnt - kinfo->spi_piocnt);
} else {
unsigned slave = subport_fp(fp) - 1;
- kinfo->spi_piocnt = dd->ipath_pbufsport / subport_cnt;
+ kinfo->spi_piocnt = pd->port_piocnt / subport_cnt;
kinfo->spi_piobufbase = (u64) pd->port_piobufs +
dd->ipath_palign * kinfo->spi_piocnt * slave;
}
- /*
- * Set the PIO avail update threshold to no larger
- * than the number of buffers per process. Note that
- * we decrease it here, but won't ever increase it.
- */
- if (dd->ipath_pioupd_thresh &&
- kinfo->spi_piocnt < dd->ipath_pioupd_thresh) {
- unsigned long flags;
-
- dd->ipath_pioupd_thresh = kinfo->spi_piocnt;
- ipath_dbg("Decreased pio update threshold to %u\n",
- dd->ipath_pioupd_thresh);
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl &= ~(INFINIPATH_S_UPDTHRESH_MASK
- << INFINIPATH_S_UPDTHRESH_SHIFT);
- dd->ipath_sendctrl |= dd->ipath_pioupd_thresh
- << INFINIPATH_S_UPDTHRESH_SHIFT;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
- }
-
if (shared) {
kinfo->spi_port_uregbase = (u64) dd->ipath_uregbase +
dd->ipath_ureg_align * pd->port_port;
@@ -1309,19 +1287,19 @@
ureg = dd->ipath_uregbase + dd->ipath_ureg_align * pd->port_port;
if (!pd->port_subport_cnt) {
/* port is not shared */
- piocnt = dd->ipath_pbufsport;
+ piocnt = pd->port_piocnt;
piobufs = pd->port_piobufs;
} else if (!subport_fp(fp)) {
/* caller is the master */
- piocnt = (dd->ipath_pbufsport / pd->port_subport_cnt) +
- (dd->ipath_pbufsport % pd->port_subport_cnt);
+ piocnt = (pd->port_piocnt / pd->port_subport_cnt) +
+ (pd->port_piocnt % pd->port_subport_cnt);
piobufs = pd->port_piobufs +
- dd->ipath_palign * (dd->ipath_pbufsport - piocnt);
+ dd->ipath_palign * (pd->port_piocnt - piocnt);
} else {
unsigned slave = subport_fp(fp) - 1;
/* caller is a slave */
- piocnt = dd->ipath_pbufsport / pd->port_subport_cnt;
+ piocnt = pd->port_piocnt / pd->port_subport_cnt;
piobufs = pd->port_piobufs + dd->ipath_palign * piocnt * slave;
}
@@ -1633,9 +1611,6 @@
port_fp(fp) = pd;
pd->port_pid = current->pid;
strncpy(pd->port_comm, current->comm, sizeof(pd->port_comm));
- ipath_chg_pioavailkernel(dd,
- dd->ipath_pbufsport * (pd->port_port - 1),
- dd->ipath_pbufsport, 0);
ipath_stats.sps_ports++;
ret = 0;
} else
@@ -1938,11 +1913,25 @@
/* for now we do nothing with rcvhdrcnt: uinfo->spu_rcvhdrcnt */
+ /* some ports may get extra buffers, calculate that here */
+ if (pd->port_port <= dd->ipath_ports_extrabuf)
+ pd->port_piocnt = dd->ipath_pbufsport + 1;
+ else
+ pd->port_piocnt = dd->ipath_pbufsport;
+
/* for right now, kernel piobufs are at end, so port 1 is at 0 */
+ if (pd->port_port <= dd->ipath_ports_extrabuf)
+ pd->port_pio_base = (dd->ipath_pbufsport + 1)
+ * (pd->port_port - 1);
+ else
+ pd->port_pio_base = dd->ipath_ports_extrabuf +
+ dd->ipath_pbufsport * (pd->port_port - 1);
pd->port_piobufs = dd->ipath_piobufbase +
- dd->ipath_pbufsport * (pd->port_port - 1) * dd->ipath_palign;
- ipath_cdbg(VERBOSE, "Set base of piobufs for port %u to 0x%x\n",
- pd->port_port, pd->port_piobufs);
+ pd->port_pio_base * dd->ipath_palign;
+ ipath_cdbg(VERBOSE, "piobuf base for port %u is 0x%x, piocnt %u,"
+ " first pio %u\n", pd->port_port, pd->port_piobufs,
+ pd->port_piocnt, pd->port_pio_base);
+ ipath_chg_pioavailkernel(dd, pd->port_pio_base, pd->port_piocnt, 0);
/*
* Now allocate the rcvhdr Q and eager TIDs; skip the TID
@@ -2107,7 +2096,6 @@
}
if (dd->ipath_kregbase) {
- int i;
/* atomically clear receive enable port and intr avail. */
clear_bit(dd->ipath_r_portenable_shift + port,
&dd->ipath_rcvctrl);
@@ -2136,9 +2124,9 @@
ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdraddr,
pd->port_port, dd->ipath_dummy_hdrq_phys);
- i = dd->ipath_pbufsport * (port - 1);
- ipath_disarm_piobufs(dd, i, dd->ipath_pbufsport);
- ipath_chg_pioavailkernel(dd, i, dd->ipath_pbufsport, 1);
+ ipath_disarm_piobufs(dd, pd->port_pio_base, pd->port_piocnt);
+ ipath_chg_pioavailkernel(dd, pd->port_pio_base,
+ pd->port_piocnt, 1);
dd->ipath_f_clear_tids(dd, pd->port_port);
diff --git a/drivers/infiniband/hw/ipath/ipath_iba7220.c b/drivers/infiniband/hw/ipath/ipath_iba7220.c
index e3ec0d1..8eee783 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba7220.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba7220.c
@@ -595,7 +595,7 @@
dev_info(&dd->pcidev->dev,
"Recovering from TXE PIO parity error\n");
- ipath_disarm_senderrbufs(dd, 1);
+ ipath_disarm_senderrbufs(dd);
}
@@ -675,10 +675,8 @@
ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control);
if ((ctrl & INFINIPATH_C_FREEZEMODE) && !ipath_diag_inuse) {
/*
- * Parity errors in send memory are recoverable,
- * just cancel the send (if indicated in * sendbuffererror),
- * count the occurrence, unfreeze (if no other handled
- * hardware error bits are set), and continue.
+ * Parity errors in send memory are recoverable by h/w
+ * just do housekeeping, exit freeze mode and continue.
*/
if (hwerrs & ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
@@ -687,13 +685,6 @@
hwerrs &= ~((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
<< INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT);
- if (!hwerrs) {
- /* else leave in freeze mode */
- ipath_write_kreg(dd,
- dd->ipath_kregs->kr_control,
- dd->ipath_control);
- goto bail;
- }
}
if (hwerrs) {
/*
@@ -723,8 +714,8 @@
*dd->ipath_statusp |= IPATH_STATUS_HWERROR;
dd->ipath_flags &= ~IPATH_INITTED;
} else {
- ipath_dbg("Clearing freezemode on ignored hardware "
- "error\n");
+ ipath_dbg("Clearing freezemode on ignored or "
+ "recovered hardware error\n");
ipath_clear_freeze(dd);
}
}
@@ -870,8 +861,9 @@
"revision %u.%u!\n",
dd->ipath_majrev, dd->ipath_minrev);
ret = 1;
- } else if (dd->ipath_minrev == 1) {
- /* Rev1 chips are prototype. Complain, but allow use */
+ } else if (dd->ipath_minrev == 1 &&
+ !(dd->ipath_flags & IPATH_INITTED)) {
+ /* Rev1 chips are prototype. Complain at init, but allow use */
ipath_dev_err(dd, "Unsupported hardware "
"revision %u.%u, Contact support@qlogic.com\n",
dd->ipath_majrev, dd->ipath_minrev);
@@ -1966,7 +1958,7 @@
dd->ipath_rcvctrl);
dd->ipath_p0_rcvegrcnt = 2048; /* always */
if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
- dd->ipath_pioreserved = 1; /* reserve a buffer */
+ dd->ipath_pioreserved = 3; /* kpiobufs used for PIO */
}
diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c
index 27dd894..3e5baa4 100644
--- a/drivers/infiniband/hw/ipath/ipath_init_chip.c
+++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c
@@ -41,7 +41,7 @@
/*
* min buffers we want to have per port, after driver
*/
-#define IPATH_MIN_USER_PORT_BUFCNT 8
+#define IPATH_MIN_USER_PORT_BUFCNT 7
/*
* Number of ports we are configured to use (to allow for more pio
@@ -54,13 +54,9 @@
/*
* Number of buffers reserved for driver (verbs and layered drivers.)
- * Reserved at end of buffer list. Initialized based on
- * number of PIO buffers if not set via module interface.
+ * Initialized based on number of PIO buffers if not set via module interface.
* The problem with this is that it's global, but we'll use different
- * numbers for different chip types. So the default value is not
- * very useful. I've redefined it for the 1.3 release so that it's
- * zero unless set by the user to something else, in which case we
- * try to respect it.
+ * numbers for different chip types.
*/
static ushort ipath_kpiobufs;
@@ -546,9 +542,12 @@
pioavail = dd->ipath_pioavailregs_dma[i ^ 1];
else
pioavail = dd->ipath_pioavailregs_dma[i];
- dd->ipath_pioavailshadow[i] = le64_to_cpu(pioavail) |
- (~dd->ipath_pioavailkernel[i] <<
- INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT);
+ /*
+ * don't need to worry about ipath_pioavailkernel here
+ * because we will call ipath_chg_pioavailkernel() later
+ * in initialization, to busy out buffers as needed
+ */
+ dd->ipath_pioavailshadow[i] = le64_to_cpu(pioavail);
}
/* can get counters, stats, etc. */
dd->ipath_flags |= IPATH_PRESENT;
@@ -708,12 +707,11 @@
int ipath_init_chip(struct ipath_devdata *dd, int reinit)
{
int ret = 0;
- u32 val32, kpiobufs;
+ u32 kpiobufs, defkbufs;
u32 piobufs, uports;
u64 val;
struct ipath_portdata *pd;
gfp_t gfp_flags = GFP_USER | __GFP_COMP;
- unsigned long flags;
ret = init_housekeeping(dd, reinit);
if (ret)
@@ -753,56 +751,46 @@
dd->ipath_pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2)
/ (sizeof(u64) * BITS_PER_BYTE / 2);
uports = dd->ipath_cfgports ? dd->ipath_cfgports - 1 : 0;
- if (ipath_kpiobufs == 0) {
- /* not set by user (this is default) */
- if (piobufs > 144)
- kpiobufs = 32;
- else
- kpiobufs = 16;
- }
+ if (piobufs > 144)
+ defkbufs = 32 + dd->ipath_pioreserved;
else
- kpiobufs = ipath_kpiobufs;
+ defkbufs = 16 + dd->ipath_pioreserved;
- if (kpiobufs + (uports * IPATH_MIN_USER_PORT_BUFCNT) > piobufs) {
+ if (ipath_kpiobufs && (ipath_kpiobufs +
+ (uports * IPATH_MIN_USER_PORT_BUFCNT)) > piobufs) {
int i = (int) piobufs -
(int) (uports * IPATH_MIN_USER_PORT_BUFCNT);
if (i < 1)
i = 1;
dev_info(&dd->pcidev->dev, "Allocating %d PIO bufs of "
"%d for kernel leaves too few for %d user ports "
- "(%d each); using %u\n", kpiobufs,
+ "(%d each); using %u\n", ipath_kpiobufs,
piobufs, uports, IPATH_MIN_USER_PORT_BUFCNT, i);
/*
* shouldn't change ipath_kpiobufs, because could be
* different for different devices...
*/
kpiobufs = i;
- }
+ } else if (ipath_kpiobufs)
+ kpiobufs = ipath_kpiobufs;
+ else
+ kpiobufs = defkbufs;
dd->ipath_lastport_piobuf = piobufs - kpiobufs;
dd->ipath_pbufsport =
uports ? dd->ipath_lastport_piobuf / uports : 0;
- val32 = dd->ipath_lastport_piobuf - (dd->ipath_pbufsport * uports);
- if (val32 > 0) {
- ipath_dbg("allocating %u pbufs/port leaves %u unused, "
- "add to kernel\n", dd->ipath_pbufsport, val32);
- dd->ipath_lastport_piobuf -= val32;
- kpiobufs += val32;
- ipath_dbg("%u pbufs/port leaves %u unused, add to kernel\n",
- dd->ipath_pbufsport, val32);
- }
+ /* if not an even divisor, some user ports get extra buffers */
+ dd->ipath_ports_extrabuf = dd->ipath_lastport_piobuf -
+ (dd->ipath_pbufsport * uports);
+ if (dd->ipath_ports_extrabuf)
+ ipath_dbg("%u pbufs/port leaves some unused, add 1 buffer to "
+ "ports <= %u\n", dd->ipath_pbufsport,
+ dd->ipath_ports_extrabuf);
dd->ipath_lastpioindex = 0;
dd->ipath_lastpioindexl = dd->ipath_piobcnt2k;
- ipath_chg_pioavailkernel(dd, 0, piobufs, 1);
+ /* ipath_pioavailshadow initialized earlier */
ipath_cdbg(VERBOSE, "%d PIO bufs for kernel out of %d total %u "
"each for %u user ports\n", kpiobufs,
piobufs, dd->ipath_pbufsport, uports);
- if (dd->ipath_pioupd_thresh) {
- if (dd->ipath_pbufsport < dd->ipath_pioupd_thresh)
- dd->ipath_pioupd_thresh = dd->ipath_pbufsport;
- if (kpiobufs < dd->ipath_pioupd_thresh)
- dd->ipath_pioupd_thresh = kpiobufs;
- }
-
ret = dd->ipath_f_early_init(dd);
if (ret) {
ipath_dev_err(dd, "Early initialization failure\n");
@@ -810,13 +798,6 @@
}
/*
- * Cancel any possible active sends from early driver load.
- * Follows early_init because some chips have to initialize
- * PIO buffers in early_init to avoid false parity errors.
- */
- ipath_cancel_sends(dd, 0);
-
- /*
* Early_init sets rcvhdrentsize and rcvhdrsize, so this must be
* done after early_init.
*/
@@ -836,6 +817,7 @@
ipath_write_kreg(dd, dd->ipath_kregs->kr_sendpioavailaddr,
dd->ipath_pioavailregs_phys);
+
/*
* this is to detect s/w errors, which the h/w works around by
* ignoring the low 6 bits of address, if it wasn't aligned.
@@ -862,12 +844,6 @@
~0ULL&~INFINIPATH_HWE_MEMBISTFAILED);
ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0ULL);
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl = INFINIPATH_S_PIOENABLE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-
/*
* before error clears, since we expect serdes pll errors during
* this, the first time after reset
@@ -940,6 +916,19 @@
else
enable_chip(dd, reinit);
+ /* after enable_chip, so pioavailshadow setup */
+ ipath_chg_pioavailkernel(dd, 0, piobufs, 1);
+
+ /*
+ * Cancel any possible active sends from early driver load.
+ * Follows early_init because some chips have to initialize
+ * PIO buffers in early_init to avoid false parity errors.
+ * After enable and ipath_chg_pioavailkernel so we can safely
+ * enable pioavail updates and PIOENABLE; packets are now
+ * ready to go out.
+ */
+ ipath_cancel_sends(dd, 1);
+
if (!reinit) {
/*
* Used when we close a port, for DMA already in flight
diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c
index 1b58f47..26900b3 100644
--- a/drivers/infiniband/hw/ipath/ipath_intr.c
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c
@@ -38,42 +38,12 @@
#include "ipath_verbs.h"
#include "ipath_common.h"
-/*
- * clear (write) a pio buffer, to clear a parity error. This routine
- * should only be called when in freeze mode, and the buffer should be
- * canceled afterwards.
- */
-static void ipath_clrpiobuf(struct ipath_devdata *dd, u32 pnum)
-{
- u32 __iomem *pbuf;
- u32 dwcnt; /* dword count to write */
- if (pnum < dd->ipath_piobcnt2k) {
- pbuf = (u32 __iomem *) (dd->ipath_pio2kbase + pnum *
- dd->ipath_palign);
- dwcnt = dd->ipath_piosize2k >> 2;
- }
- else {
- pbuf = (u32 __iomem *) (dd->ipath_pio4kbase +
- (pnum - dd->ipath_piobcnt2k) * dd->ipath_4kalign);
- dwcnt = dd->ipath_piosize4k >> 2;
- }
- dev_info(&dd->pcidev->dev,
- "Rewrite PIO buffer %u, to recover from parity error\n",
- pnum);
-
- /* no flush required, since already in freeze */
- writel(dwcnt + 1, pbuf);
- while (--dwcnt)
- writel(0, pbuf++);
-}
/*
* Called when we might have an error that is specific to a particular
* PIO buffer, and may need to cancel that buffer, so it can be re-used.
- * If rewrite is true, and bits are set in the sendbufferror registers,
- * we'll write to the buffer, for error recovery on parity errors.
*/
-void ipath_disarm_senderrbufs(struct ipath_devdata *dd, int rewrite)
+void ipath_disarm_senderrbufs(struct ipath_devdata *dd)
{
u32 piobcnt;
unsigned long sbuf[4];
@@ -109,11 +79,8 @@
}
for (i = 0; i < piobcnt; i++)
- if (test_bit(i, sbuf)) {
- if (rewrite)
- ipath_clrpiobuf(dd, i);
+ if (test_bit(i, sbuf))
ipath_disarm_piobufs(dd, i, 1);
- }
/* ignore armlaunch errs for a bit */
dd->ipath_lastcancel = jiffies+3;
}
@@ -164,7 +131,7 @@
{
u64 ignore_this_time = 0;
- ipath_disarm_senderrbufs(dd, 0);
+ ipath_disarm_senderrbufs(dd);
if ((errs & E_SUM_LINK_PKTERRS) &&
!(dd->ipath_flags & IPATH_LINKACTIVE)) {
/*
@@ -909,8 +876,8 @@
* processes (causing armlaunch), send errors due to going into freeze mode,
* etc., and try to avoid causing extra interrupts while doing so.
* Forcibly update the in-memory pioavail register copies after cleanup
- * because the chip won't do it for anything changing while in freeze mode
- * (we don't want to wait for the next pio buffer state change).
+ * because the chip won't do it while in freeze mode (the register values
+ * themselves are kept correct).
* Make sure that we don't lose any important interrupts by using the chip
* feature that says that writing 0 to a bit in *clear that is set in
* *status will cause an interrupt to be generated again (if allowed by
@@ -918,44 +885,23 @@
*/
void ipath_clear_freeze(struct ipath_devdata *dd)
{
- int i, im;
- u64 val;
-
/* disable error interrupts, to avoid confusion */
ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask, 0ULL);
/* also disable interrupts; errormask is sometimes overwriten */
ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);
- /*
- * clear all sends, because they have may been
- * completed by usercode while in freeze mode, and
- * therefore would not be sent, and eventually
- * might cause the process to run out of bufs
- */
- ipath_cancel_sends(dd, 0);
+ ipath_cancel_sends(dd, 1);
+
+ /* clear the freeze, and be sure chip saw it */
ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
dd->ipath_control);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- /* ensure pio avail updates continue */
+ /* force in-memory update now we are out of freeze */
ipath_force_pio_avail_update(dd);
/*
- * We just enabled pioavailupdate, so dma copy is almost certainly
- * not yet right, so read the registers directly. Similar to init
- */
- for (i = 0; i < dd->ipath_pioavregs; i++) {
- /* deal with 6110 chip bug */
- im = (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) ?
- i ^ 1 : i;
- val = ipath_read_kreg64(dd, (0x1000 / sizeof(u64)) + im);
- dd->ipath_pioavailregs_dma[i] = cpu_to_le64(val);
- dd->ipath_pioavailshadow[i] = val |
- (~dd->ipath_pioavailkernel[i] <<
- INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT);
- }
-
- /*
* force new interrupt if any hwerr, error or interrupt bits are
* still set, and clear "safe" send packet errors related to freeze
* and cancelling sends. Re-enable error interrupts before possible
@@ -1312,10 +1258,8 @@
ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
- if (!(dd->ipath_flags & IPATH_HAS_SEND_DMA))
- handle_layer_pioavail(dd);
- else
- ipath_dbg("unexpected BUFAVAIL intr\n");
+ /* always process; sdma verbs uses PIO for acks and VL15 */
+ handle_layer_pioavail(dd);
}
ret = IRQ_HANDLED;
diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
index 202337a..02b24a3 100644
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -117,6 +117,10 @@
u16 port_subport_cnt;
/* non-zero if port is being shared. */
u16 port_subport_id;
+ /* number of pio bufs for this port (all procs, if shared) */
+ u32 port_piocnt;
+ /* first pio buffer for this port */
+ u32 port_pio_base;
/* chip offset of PIO buffers for this port */
u32 port_piobufs;
/* how many alloc_pages() chunks in port_rcvegrbuf_pages */
@@ -384,6 +388,8 @@
u32 ipath_lastrpkts;
/* pio bufs allocated per port */
u32 ipath_pbufsport;
+ /* if remainder on bufs/port, ports < extrabuf get 1 extra */
+ u32 ipath_ports_extrabuf;
u32 ipath_pioupd_thresh; /* update threshold, some chips */
/*
* number of ports configured as max; zero is set to number chip
@@ -1011,7 +1017,7 @@
int ipath_update_eeprom_log(struct ipath_devdata *dd);
void ipath_inc_eeprom_err(struct ipath_devdata *dd, u32 eidx, u32 incr);
u64 ipath_snap_cntr(struct ipath_devdata *, ipath_creg);
-void ipath_disarm_senderrbufs(struct ipath_devdata *, int);
+void ipath_disarm_senderrbufs(struct ipath_devdata *);
void ipath_force_pio_avail_update(struct ipath_devdata *);
void signal_ib_event(struct ipath_devdata *dd, enum ib_event_type ev);
diff --git a/drivers/infiniband/hw/ipath/ipath_rc.c b/drivers/infiniband/hw/ipath/ipath_rc.c
index c405dfb..08b11b5 100644
--- a/drivers/infiniband/hw/ipath/ipath_rc.c
+++ b/drivers/infiniband/hw/ipath/ipath_rc.c
@@ -1746,7 +1746,11 @@
qp->r_wrid_valid = 0;
wc.wr_id = qp->r_wr_id;
wc.status = IB_WC_SUCCESS;
- wc.opcode = IB_WC_RECV;
+ if (opcode == OP(RDMA_WRITE_LAST_WITH_IMMEDIATE) ||
+ opcode == OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE))
+ wc.opcode = IB_WC_RECV_RDMA_WITH_IMM;
+ else
+ wc.opcode = IB_WC_RECV;
wc.vendor_err = 0;
wc.qp = &qp->ibqp;
wc.src_qp = qp->remote_qpn;
diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c
index 8ac5c1d..9e3fe61 100644
--- a/drivers/infiniband/hw/ipath/ipath_ruc.c
+++ b/drivers/infiniband/hw/ipath/ipath_ruc.c
@@ -481,9 +481,10 @@
wake_up(&qp->wait);
}
-static void want_buffer(struct ipath_devdata *dd)
+static void want_buffer(struct ipath_devdata *dd, struct ipath_qp *qp)
{
- if (!(dd->ipath_flags & IPATH_HAS_SEND_DMA)) {
+ if (!(dd->ipath_flags & IPATH_HAS_SEND_DMA) ||
+ qp->ibqp.qp_type == IB_QPT_SMI) {
unsigned long flags;
spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
@@ -519,7 +520,7 @@
spin_lock_irqsave(&dev->pending_lock, flags);
list_add_tail(&qp->piowait, &dev->piowait);
spin_unlock_irqrestore(&dev->pending_lock, flags);
- want_buffer(dev->dd);
+ want_buffer(dev->dd, qp);
dev->n_piowait++;
}
diff --git a/drivers/infiniband/hw/ipath/ipath_sdma.c b/drivers/infiniband/hw/ipath/ipath_sdma.c
index 1974df7..3697449 100644
--- a/drivers/infiniband/hw/ipath/ipath_sdma.c
+++ b/drivers/infiniband/hw/ipath/ipath_sdma.c
@@ -308,13 +308,15 @@
spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
/*
- * Don't restart sdma here. Wait until link is up to ACTIVE.
- * VL15 MADs used to bring the link up use PIO, and multiple
- * link transitions otherwise cause the sdma engine to be
+ * Don't restart sdma here (with the exception
+ * below). Wait until link is up to ACTIVE. VL15 MADs
+ * used to bring the link up use PIO, and multiple link
+ * transitions otherwise cause the sdma engine to be
* stopped and started multiple times.
- * The disable is done here, including the shadow, so the
- * state is kept consistent.
- * See ipath_restart_sdma() for the actual starting of sdma.
+ * The disable is done here, including the shadow,
+ * so the state is kept consistent.
+ * See ipath_restart_sdma() for the actual starting
+ * of sdma.
*/
spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
dd->ipath_sendctrl &= ~INFINIPATH_S_SDMAENABLE;
@@ -326,6 +328,13 @@
/* make sure I see next message */
dd->ipath_sdma_abort_jiffies = 0;
+ /*
+ * Not everything that takes SDMA offline is a link
+ * status change. If the link was up, restart SDMA.
+ */
+ if (dd->ipath_flags & IPATH_LINKACTIVE)
+ ipath_restart_sdma(dd);
+
goto done;
}
@@ -427,7 +436,12 @@
goto done;
}
- dd->ipath_sdma_status = 0;
+ /*
+ * Set initial status as if we had been up, then gone down.
+ * This lets initial start on transition to ACTIVE be the
+ * same as restart after link flap.
+ */
+ dd->ipath_sdma_status = IPATH_SDMA_ABORT_ABORTED;
dd->ipath_sdma_abort_jiffies = 0;
dd->ipath_sdma_generation = 0;
dd->ipath_sdma_descq_tail = 0;
@@ -449,16 +463,19 @@
ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmaheadaddr,
dd->ipath_sdma_head_phys);
- /* Reserve all the former "kernel" piobufs */
- n = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k - dd->ipath_pioreserved;
- for (i = dd->ipath_lastport_piobuf; i < n; ++i) {
+ /*
+ * Reserve all the former "kernel" piobufs, using high number range
+ * so we get as many 4K buffers as possible
+ */
+ n = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
+ i = dd->ipath_lastport_piobuf + dd->ipath_pioreserved;
+ ipath_chg_pioavailkernel(dd, i, n - i , 0);
+ for (; i < n; ++i) {
unsigned word = i / 64;
unsigned bit = i & 63;
BUG_ON(word >= 3);
senddmabufmask[word] |= 1ULL << bit;
}
- ipath_chg_pioavailkernel(dd, dd->ipath_lastport_piobuf,
- n - dd->ipath_lastport_piobuf, 0);
ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask0,
senddmabufmask[0]);
ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask1,
@@ -615,6 +632,9 @@
ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+ /* notify upper layers */
+ ipath_ib_piobufavail(dd->verbs_dev);
+
bail:
return;
}
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c
index e63927c..5015cd2 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.c
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.c
@@ -396,7 +396,6 @@
wqe = get_swqe_ptr(qp, qp->s_head);
wqe->wr = *wr;
- wqe->ssn = qp->s_ssn++;
wqe->length = 0;
if (wr->num_sge) {
acc = wr->opcode >= IB_WR_RDMA_READ ?
@@ -422,6 +421,7 @@
goto bail_inval;
} else if (wqe->length > to_idev(qp->ibqp.device)->dd->ipath_ibmtu)
goto bail_inval;
+ wqe->ssn = qp->s_ssn++;
qp->s_head = next;
ret = 0;
diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c
index 2f199c5..4521319 100644
--- a/drivers/infiniband/hw/mlx4/cq.c
+++ b/drivers/infiniband/hw/mlx4/cq.c
@@ -246,7 +246,7 @@
if (context)
ib_umem_release(cq->umem);
else
- mlx4_ib_free_cq_buf(dev, &cq->buf, entries);
+ mlx4_ib_free_cq_buf(dev, &cq->buf, cq->ibcq.cqe);
err_db:
if (!context)
@@ -434,7 +434,7 @@
mlx4_ib_db_unmap_user(to_mucontext(cq->uobject->context), &mcq->db);
ib_umem_release(mcq->umem);
} else {
- mlx4_ib_free_cq_buf(dev, &mcq->buf, cq->cqe + 1);
+ mlx4_ib_free_cq_buf(dev, &mcq->buf, cq->cqe);
mlx4_db_free(dev->dev, &mcq->db);
}
diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h
index 9044f88..ca126fc 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib.h
+++ b/drivers/infiniband/ulp/ipoib/ipoib.h
@@ -334,6 +334,7 @@
#endif
int hca_caps;
struct ipoib_ethtool_st ethtool;
+ struct timer_list poll_timer;
};
struct ipoib_ah {
@@ -404,6 +405,7 @@
int ipoib_poll(struct napi_struct *napi, int budget);
void ipoib_ib_completion(struct ib_cq *cq, void *dev_ptr);
+void ipoib_send_comp_handler(struct ib_cq *cq, void *dev_ptr);
struct ipoib_ah *ipoib_create_ah(struct net_device *dev,
struct ib_pd *pd, struct ib_ah_attr *attr);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index 97b815c..f429bce 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -461,6 +461,26 @@
netif_rx_schedule(dev, &priv->napi);
}
+static void drain_tx_cq(struct net_device *dev)
+{
+ struct ipoib_dev_priv *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->tx_lock, flags);
+ while (poll_tx(priv))
+ ; /* nothing */
+
+ if (netif_queue_stopped(dev))
+ mod_timer(&priv->poll_timer, jiffies + 1);
+
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
+}
+
+void ipoib_send_comp_handler(struct ib_cq *cq, void *dev_ptr)
+{
+ drain_tx_cq((struct net_device *)dev_ptr);
+}
+
static inline int post_send(struct ipoib_dev_priv *priv,
unsigned int wr_id,
struct ib_ah *address, u32 qpn,
@@ -555,12 +575,22 @@
else
priv->tx_wr.send_flags &= ~IB_SEND_IP_CSUM;
+ if (++priv->tx_outstanding == ipoib_sendq_size) {
+ ipoib_dbg(priv, "TX ring full, stopping kernel net queue\n");
+ if (ib_req_notify_cq(priv->send_cq, IB_CQ_NEXT_COMP))
+ ipoib_warn(priv, "request notify on send CQ failed\n");
+ netif_stop_queue(dev);
+ }
+
if (unlikely(post_send(priv, priv->tx_head & (ipoib_sendq_size - 1),
address->ah, qpn, tx_req, phead, hlen))) {
ipoib_warn(priv, "post_send failed\n");
++dev->stats.tx_errors;
+ --priv->tx_outstanding;
ipoib_dma_unmap_tx(priv->ca, tx_req);
dev_kfree_skb_any(skb);
+ if (netif_queue_stopped(dev))
+ netif_wake_queue(dev);
} else {
dev->trans_start = jiffies;
@@ -568,14 +598,11 @@
++priv->tx_head;
skb_orphan(skb);
- if (++priv->tx_outstanding == ipoib_sendq_size) {
- ipoib_dbg(priv, "TX ring full, stopping kernel net queue\n");
- netif_stop_queue(dev);
- }
}
if (unlikely(priv->tx_outstanding > MAX_SEND_CQE))
- poll_tx(priv);
+ while (poll_tx(priv))
+ ; /* nothing */
}
static void __ipoib_reap_ah(struct net_device *dev)
@@ -609,6 +636,11 @@
round_jiffies_relative(HZ));
}
+static void ipoib_ib_tx_timer_func(unsigned long ctx)
+{
+ drain_tx_cq((struct net_device *)ctx);
+}
+
int ipoib_ib_dev_open(struct net_device *dev)
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
@@ -645,6 +677,10 @@
queue_delayed_work(ipoib_workqueue, &priv->ah_reap_task,
round_jiffies_relative(HZ));
+ init_timer(&priv->poll_timer);
+ priv->poll_timer.function = ipoib_ib_tx_timer_func;
+ priv->poll_timer.data = (unsigned long)dev;
+
set_bit(IPOIB_FLAG_INITIALIZED, &priv->flags);
return 0;
@@ -810,6 +846,7 @@
ipoib_dbg(priv, "All sends and receives done.\n");
timeout:
+ del_timer_sync(&priv->poll_timer);
qp_attr.qp_state = IB_QPS_RESET;
if (ib_modify_qp(priv->qp, &qp_attr, IB_QP_STATE))
ipoib_warn(priv, "Failed to modify QP to RESET state\n");
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
index c1e7ece..8766d29 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
@@ -187,7 +187,8 @@
goto out_free_mr;
}
- priv->send_cq = ib_create_cq(priv->ca, NULL, NULL, dev, ipoib_sendq_size, 0);
+ priv->send_cq = ib_create_cq(priv->ca, ipoib_send_comp_handler, NULL,
+ dev, ipoib_sendq_size, 0);
if (IS_ERR(priv->send_cq)) {
printk(KERN_WARNING "%s: failed to create send CQ\n", ca->name);
goto out_free_recv_cq;
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 92b6834..3ad8bd9f 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -14,7 +14,7 @@
config INPUT_PCSPKR
tristate "PC Speaker support"
- depends on ALPHA || X86 || MIPS || PPC_PREP || PPC_CHRP || PPC_PSERIES
+ depends on PCSPKR_PLATFORM
depends on SND_PCSP=n
help
Say Y here if you want the standard PC Speaker to be used for
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index 02b3ad8c..edfedd9 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -69,6 +69,7 @@
#include <linux/time.h>
#include <linux/slab.h>
#include <linux/hil.h>
+#include <linux/semaphore.h>
#include <asm/io.h>
#include <asm/system.h>
diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h
index 3b4e13b..f451c73 100644
--- a/drivers/input/serio/i8042-io.h
+++ b/drivers/input/serio/i8042-io.h
@@ -25,7 +25,7 @@
#elif defined(__arm__)
/* defined in include/asm-arm/arch-xxx/irqs.h */
#include <asm/irq.h>
-#elif defined(CONFIG_SUPERH64)
+#elif defined(CONFIG_SH_CAYMAN)
#include <asm/irq.h>
#else
# define I8042_KBD_IRQ 1
diff --git a/drivers/isdn/hysdn/hysdn_procconf.c b/drivers/isdn/hysdn/hysdn_procconf.c
index 877be99..15906d0 100644
--- a/drivers/isdn/hysdn/hysdn_procconf.c
+++ b/drivers/isdn/hysdn/hysdn_procconf.c
@@ -405,7 +405,8 @@
sprintf(conf_name, "%s%d", PROC_CONF_BASENAME, card->myid);
if ((card->procconf = (void *) proc_create(conf_name,
S_IFREG | S_IRUGO | S_IWUSR,
- hysdn_proc_entry)) != NULL) {
+ hysdn_proc_entry,
+ &conf_fops)) != NULL) {
hysdn_proclog_init(card); /* init the log file entry */
}
card = card->next; /* next entry */
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index 2bc9bf7..8080249 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -85,27 +85,34 @@
+ desc->config_len;
}
-/* This tests (and acknowleges) a feature bit. */
-static bool lg_feature(struct virtio_device *vdev, unsigned fbit)
+/* This gets the device's feature bits. */
+static u32 lg_get_features(struct virtio_device *vdev)
{
+ unsigned int i;
+ u32 features = 0;
struct lguest_device_desc *desc = to_lgdev(vdev)->desc;
- u8 *features;
+ u8 *in_features = lg_features(desc);
- /* Obviously if they ask for a feature off the end of our feature
- * bitmap, it's not set. */
- if (fbit / 8 > desc->feature_len)
- return false;
+ /* We do this the slow but generic way. */
+ for (i = 0; i < min(desc->feature_len * 8, 32); i++)
+ if (in_features[i / 8] & (1 << (i % 8)))
+ features |= (1 << i);
- /* The feature bitmap comes after the virtqueues. */
- features = lg_features(desc);
- if (!(features[fbit / 8] & (1 << (fbit % 8))))
- return false;
+ return features;
+}
- /* We set the matching bit in the other half of the bitmap to tell the
- * Host we want to use this feature. We don't use this yet, but we
- * could in future. */
- features[desc->feature_len + fbit / 8] |= (1 << (fbit % 8));
- return true;
+static void lg_set_features(struct virtio_device *vdev, u32 features)
+{
+ unsigned int i;
+ struct lguest_device_desc *desc = to_lgdev(vdev)->desc;
+ /* Second half of bitmap is features we accept. */
+ u8 *out_features = lg_features(desc) + desc->feature_len;
+
+ memset(out_features, 0, desc->feature_len);
+ for (i = 0; i < min(desc->feature_len * 8, 32); i++) {
+ if (features & (1 << i))
+ out_features[i / 8] |= (1 << (i % 8));
+ }
}
/* Once they've found a field, getting a copy of it is easy. */
@@ -137,22 +144,28 @@
return to_lgdev(vdev)->desc->status;
}
-static void lg_set_status(struct virtio_device *vdev, u8 status)
-{
- BUG_ON(!status);
- to_lgdev(vdev)->desc->status = status;
-}
-
-/* To reset the device, we (ab)use the NOTIFY hypercall, with the descriptor
- * address of the device. The Host will zero the status and all the
- * features. */
-static void lg_reset(struct virtio_device *vdev)
+/* To notify on status updates, we (ab)use the NOTIFY hypercall, with the
+ * descriptor address of the device. A zero status means "reset". */
+static void set_status(struct virtio_device *vdev, u8 status)
{
unsigned long offset = (void *)to_lgdev(vdev)->desc - lguest_devices;
+ /* We set the status. */
+ to_lgdev(vdev)->desc->status = status;
hcall(LHCALL_NOTIFY, (max_pfn<<PAGE_SHIFT) + offset, 0, 0);
}
+static void lg_set_status(struct virtio_device *vdev, u8 status)
+{
+ BUG_ON(!status);
+ set_status(vdev, status);
+}
+
+static void lg_reset(struct virtio_device *vdev)
+{
+ set_status(vdev, 0);
+}
+
/*
* Virtqueues
*
@@ -286,7 +299,8 @@
/* The ops structure which hooks everything together. */
static struct virtio_config_ops lguest_config_ops = {
- .feature = lg_feature,
+ .get_features = lg_get_features,
+ .set_features = lg_set_features,
.get = lg_get,
.set = lg_set,
.get_status = lg_get_status,
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index 645e6e0..e73a000 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -102,7 +102,7 @@
static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
{
/* We have a limited number the number of CPUs in the lguest struct. */
- if (id >= NR_CPUS)
+ if (id >= ARRAY_SIZE(cpu->lg->cpus))
return -EINVAL;
/* Set up this CPU's id, and pointer back to the lguest struct. */
@@ -251,8 +251,6 @@
if (!lg || (cpu_id >= lg->nr_cpus))
return -EINVAL;
cpu = &lg->cpus[cpu_id];
- if (!cpu)
- return -EINVAL;
/* Once the Guest is dead, you can only read() why it died. */
if (lg->dead)
diff --git a/drivers/macintosh/adb.c b/drivers/macintosh/adb.c
index 2097820..b8b9e44 100644
--- a/drivers/macintosh/adb.c
+++ b/drivers/macintosh/adb.c
@@ -37,7 +37,7 @@
#include <linux/device.h>
#include <linux/kthread.h>
#include <linux/platform_device.h>
-#include <linux/semaphore.h>
+#include <linux/mutex.h>
#include <asm/uaccess.h>
#ifdef CONFIG_PPC
@@ -102,7 +102,7 @@
} adb_handler[16];
/*
- * The adb_handler_sem mutex protects all accesses to the original_address
+ * The adb_handler_mutex mutex protects all accesses to the original_address
* and handler_id fields of adb_handler[i] for all i, and changes to the
* handler field.
* Accesses to the handler field are protected by the adb_handler_lock
@@ -110,7 +110,7 @@
* time adb_unregister returns, we know that the old handler isn't being
* called.
*/
-static DECLARE_MUTEX(adb_handler_sem);
+static DEFINE_MUTEX(adb_handler_mutex);
static DEFINE_RWLOCK(adb_handler_lock);
#if 0
@@ -355,7 +355,7 @@
msleep(500);
}
- down(&adb_handler_sem);
+ mutex_lock(&adb_handler_mutex);
write_lock_irq(&adb_handler_lock);
memset(adb_handler, 0, sizeof(adb_handler));
write_unlock_irq(&adb_handler_lock);
@@ -376,7 +376,7 @@
if (adb_controller->autopoll)
adb_controller->autopoll(autopoll_devs);
}
- up(&adb_handler_sem);
+ mutex_unlock(&adb_handler_mutex);
blocking_notifier_call_chain(&adb_client_list,
ADB_MSG_POST_RESET, NULL);
@@ -454,7 +454,7 @@
{
int i;
- down(&adb_handler_sem);
+ mutex_lock(&adb_handler_mutex);
ids->nids = 0;
for (i = 1; i < 16; i++) {
if ((adb_handler[i].original_address == default_id) &&
@@ -472,7 +472,7 @@
ids->id[ids->nids++] = i;
}
}
- up(&adb_handler_sem);
+ mutex_unlock(&adb_handler_mutex);
return ids->nids;
}
@@ -481,7 +481,7 @@
{
int ret = -ENODEV;
- down(&adb_handler_sem);
+ mutex_lock(&adb_handler_mutex);
write_lock_irq(&adb_handler_lock);
if (adb_handler[index].handler) {
while(adb_handler[index].busy) {
@@ -493,7 +493,7 @@
adb_handler[index].handler = NULL;
}
write_unlock_irq(&adb_handler_lock);
- up(&adb_handler_sem);
+ mutex_unlock(&adb_handler_mutex);
return ret;
}
@@ -557,19 +557,19 @@
{
int ret;
- down(&adb_handler_sem);
+ mutex_lock(&adb_handler_mutex);
ret = try_handler_change(address, new_id);
- up(&adb_handler_sem);
+ mutex_unlock(&adb_handler_mutex);
return ret;
}
int
adb_get_infos(int address, int *original_address, int *handler_id)
{
- down(&adb_handler_sem);
+ mutex_lock(&adb_handler_mutex);
*original_address = adb_handler[address].original_address;
*handler_id = adb_handler[address].handler_id;
- up(&adb_handler_sem);
+ mutex_unlock(&adb_handler_mutex);
return (*original_address != 0);
}
@@ -628,10 +628,10 @@
case ADB_QUERY_GETDEVINFO:
if (req->nbytes < 3)
break;
- down(&adb_handler_sem);
+ mutex_lock(&adb_handler_mutex);
req->reply[0] = adb_handler[req->data[2]].original_address;
req->reply[1] = adb_handler[req->data[2]].handler_id;
- up(&adb_handler_sem);
+ mutex_unlock(&adb_handler_mutex);
req->complete = 1;
req->reply_len = 2;
adb_write_done(req);
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index 1e0a69a..ddfb426 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -122,6 +122,7 @@
#include <linux/kmod.h>
#include <linux/i2c.h>
#include <linux/kthread.h>
+#include <linux/mutex.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/io.h>
@@ -169,7 +170,7 @@
static s32 dimm_output_clamp;
static int fcu_rpm_shift;
static int fcu_tickle_ticks;
-static DECLARE_MUTEX(driver_lock);
+static DEFINE_MUTEX(driver_lock);
/*
* We have 3 types of CPU PID control. One is "split" old style control
@@ -729,9 +730,9 @@
static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
ssize_t r; \
- down(&driver_lock); \
+ mutex_lock(&driver_lock); \
r = sprintf(buf, "%d.%03d", FIX32TOPRINT(data)); \
- up(&driver_lock); \
+ mutex_unlock(&driver_lock); \
return r; \
}
#define BUILD_SHOW_FUNC_INT(name, data) \
@@ -1803,11 +1804,11 @@
{
DBG("main_control_loop started\n");
- down(&driver_lock);
+ mutex_lock(&driver_lock);
if (start_fcu() < 0) {
printk(KERN_ERR "kfand: failed to start FCU\n");
- up(&driver_lock);
+ mutex_unlock(&driver_lock);
goto out;
}
@@ -1822,14 +1823,14 @@
fcu_tickle_ticks = FCU_TICKLE_TICKS;
- up(&driver_lock);
+ mutex_unlock(&driver_lock);
while (state == state_attached) {
unsigned long elapsed, start;
start = jiffies;
- down(&driver_lock);
+ mutex_lock(&driver_lock);
/* Tickle the FCU just in case */
if (--fcu_tickle_ticks < 0) {
@@ -1861,7 +1862,7 @@
do_monitor_slots(&slots_state);
else
do_monitor_drives(&drives_state);
- up(&driver_lock);
+ mutex_unlock(&driver_lock);
if (critical_state == 1) {
printk(KERN_WARNING "Temperature control detected a critical condition\n");
@@ -2019,13 +2020,13 @@
*/
static int therm_pm72_attach(struct i2c_adapter *adapter)
{
- down(&driver_lock);
+ mutex_lock(&driver_lock);
/* Check state */
if (state == state_detached)
state = state_attaching;
if (state != state_attaching) {
- up(&driver_lock);
+ mutex_unlock(&driver_lock);
return 0;
}
@@ -2054,7 +2055,7 @@
state = state_attached;
start_control_loops();
}
- up(&driver_lock);
+ mutex_unlock(&driver_lock);
return 0;
}
@@ -2065,16 +2066,16 @@
*/
static int therm_pm72_detach(struct i2c_adapter *adapter)
{
- down(&driver_lock);
+ mutex_lock(&driver_lock);
if (state != state_detached)
state = state_detaching;
/* Stop control loops if any */
DBG("stopping control loops\n");
- up(&driver_lock);
+ mutex_unlock(&driver_lock);
stop_control_loops();
- down(&driver_lock);
+ mutex_lock(&driver_lock);
if (u3_0 != NULL && !strcmp(adapter->name, "u3 0")) {
DBG("lost U3-0, disposing control loops\n");
@@ -2090,7 +2091,7 @@
if (u3_0 == NULL && u3_1 == NULL)
state = state_detached;
- up(&driver_lock);
+ mutex_unlock(&driver_lock);
return 0;
}
diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c
index 797918d..7f2be4b 100644
--- a/drivers/macintosh/windfarm_smu_sat.c
+++ b/drivers/macintosh/windfarm_smu_sat.c
@@ -13,7 +13,7 @@
#include <linux/init.h>
#include <linux/wait.h>
#include <linux/i2c.h>
-#include <linux/semaphore.h>
+#include <linux/mutex.h>
#include <asm/prom.h>
#include <asm/smu.h>
#include <asm/pmac_low_i2c.h>
@@ -36,7 +36,7 @@
struct wf_sat {
int nr;
atomic_t refcnt;
- struct semaphore mutex;
+ struct mutex mutex;
unsigned long last_read; /* jiffies when cache last updated */
u8 cache[16];
struct i2c_client i2c;
@@ -163,7 +163,7 @@
if (sat->i2c.adapter == NULL)
return -ENODEV;
- down(&sat->mutex);
+ mutex_lock(&sat->mutex);
if (time_after(jiffies, (sat->last_read + MAX_AGE))) {
err = wf_sat_read_cache(sat);
if (err)
@@ -182,7 +182,7 @@
err = 0;
fail:
- up(&sat->mutex);
+ mutex_unlock(&sat->mutex);
return err;
}
@@ -233,7 +233,7 @@
sat->nr = -1;
sat->node = of_node_get(dev);
atomic_set(&sat->refcnt, 0);
- init_MUTEX(&sat->mutex);
+ mutex_init(&sat->mutex);
sat->i2c.addr = (addr >> 1) & 0x7f;
sat->i2c.adapter = adapter;
sat->i2c.driver = &wf_sat_driver;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 5938fa9..faf3d89 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -886,7 +886,7 @@
*/
raid10_find_phys(conf, r10_bio);
retry_write:
- blocked_rdev = 0;
+ blocked_rdev = NULL;
rcu_read_lock();
for (i = 0; i < conf->copies; i++) {
int d = r10_bio->devs[i].devnum;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 087eee0c..ee0ea91 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2369,8 +2369,8 @@
/* complete a check operation */
if (test_and_clear_bit(STRIPE_OP_CHECK, &sh->ops.complete)) {
- clear_bit(STRIPE_OP_CHECK, &sh->ops.ack);
- clear_bit(STRIPE_OP_CHECK, &sh->ops.pending);
+ clear_bit(STRIPE_OP_CHECK, &sh->ops.ack);
+ clear_bit(STRIPE_OP_CHECK, &sh->ops.pending);
if (s->failed == 0) {
if (sh->ops.zero_sum_result == 0)
/* parity is correct (on disc,
@@ -2400,16 +2400,6 @@
canceled_check = 1; /* STRIPE_INSYNC is not set */
}
- /* check if we can clear a parity disk reconstruct */
- if (test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete) &&
- test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) {
-
- clear_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending);
- clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete);
- clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.ack);
- clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending);
- }
-
/* start a new check operation if there are no failures, the stripe is
* not insync, and a repair is not in flight
*/
@@ -2424,6 +2414,17 @@
}
}
+ /* check if we can clear a parity disk reconstruct */
+ if (test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete) &&
+ test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) {
+
+ clear_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending);
+ clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete);
+ clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.ack);
+ clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending);
+ }
+
+
/* Wait for check parity and compute block operations to complete
* before write-back. If a failure occurred while the check operation
* was in flight we need to cycle this stripe through handle_stripe
diff --git a/drivers/media/Makefile b/drivers/media/Makefile
index 73f742c..cc11c4c 100644
--- a/drivers/media/Makefile
+++ b/drivers/media/Makefile
@@ -2,6 +2,8 @@
# Makefile for the kernel multimedia device drivers.
#
+obj-y := common/
+
obj-$(CONFIG_VIDEO_MEDIA) += common/
# Since hybrid devices are here, should be compiled if DVB and/or V4L
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index 8f5ed9b..3f55d47 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -613,7 +613,7 @@
}
cx = kzalloc(sizeof(struct cx18), GFP_ATOMIC);
- if (cx == 0) {
+ if (!cx) {
spin_unlock(&cx18_cards_lock);
return -ENOMEM;
}
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index a0baf2d..48e1a01 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -1634,7 +1634,7 @@
struct saa7134_fh *fh = priv;
struct saa7134_dev *dev = fh->dev;
int err;
- unsigned int flags;
+ unsigned long flags;
if (saa7134_no_overlay > 0) {
printk(KERN_ERR "V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n");
diff --git a/drivers/media/video/tcm825x.c b/drivers/media/video/tcm825x.c
index e57a646..8f0100f 100644
--- a/drivers/media/video/tcm825x.c
+++ b/drivers/media/video/tcm825x.c
@@ -885,12 +885,19 @@
return 0;
}
+static const struct i2c_device_id tcm825x_id[] = {
+ { "tcm825x", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tcm825x_id);
+
static struct i2c_driver tcm825x_i2c_driver = {
.driver = {
.name = TCM825X_NAME,
},
.probe = tcm825x_probe,
.remove = __exit_p(tcm825x_remove),
+ .id_table = tcm825x_id,
};
static struct tcm825x_sensor tcm825x = {
diff --git a/drivers/media/video/tlv320aic23b.c b/drivers/media/video/tlv320aic23b.c
index f1db542..28ab9f9 100644
--- a/drivers/media/video/tlv320aic23b.c
+++ b/drivers/media/video/tlv320aic23b.c
@@ -168,6 +168,11 @@
/* ----------------------------------------------------------------------- */
+static const struct i2c_device_id tlv320aic23b_id[] = {
+ { "tlv320aic23b", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tlv320aic23b_id);
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "tlv320aic23b",
@@ -175,4 +180,5 @@
.command = tlv320aic23b_command,
.probe = tlv320aic23b_probe,
.remove = tlv320aic23b_remove,
+ .id_table = tlv320aic23b_id,
};
diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c
index 6f9945b..c77914d 100644
--- a/drivers/media/video/tvaudio.c
+++ b/drivers/media/video/tvaudio.c
@@ -1505,7 +1505,8 @@
}
/* fill required data structures */
- strcpy(client->name, desc->name);
+ if (!id)
+ strlcpy(client->name, desc->name, I2C_NAME_SIZE);
chip->type = desc-chiplist;
chip->shadow.count = desc->registers+1;
chip->prevmode = -1;
@@ -1830,6 +1831,15 @@
return 0;
}
+/* This driver supports many devices and the idea is to let the driver
+ detect which device is present. So rather than listing all supported
+ devices here, we pretend to support a single, fake device type. */
+static const struct i2c_device_id chip_id[] = {
+ { "tvaudio", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, chip_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "tvaudio",
.driverid = I2C_DRIVERID_TVAUDIO,
@@ -1837,6 +1847,7 @@
.probe = chip_probe,
.remove = chip_remove,
.legacy_probe = chip_legacy_probe,
+ .id_table = chip_id,
};
/*
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index 30a1af8..fa39410 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -47,6 +47,7 @@
* to test the HW NMI watchdog
* F## = Break at do_fork for ## iterations
* S## = Break at sys_open for ## iterations
+ * I## = Run the single step test ## iterations
*
* NOTE: that the do_fork and sys_open tests are mutually exclusive.
*
@@ -375,7 +376,7 @@
break;
case 1:
/* set breakpoint */
- break_helper("Z0", 0, sstep_addr);
+ break_helper("Z0", NULL, sstep_addr);
break;
case 2:
/* Continue */
@@ -383,7 +384,7 @@
break;
case 3:
/* Clear breakpoint */
- break_helper("z0", 0, sstep_addr);
+ break_helper("z0", NULL, sstep_addr);
break;
default:
eprintk("kgdbts: ERROR failed sstep get emulation\n");
@@ -465,11 +466,11 @@
{ "?", "S0*" }, /* Clear break points */
{ "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */
{ "c", "T0*", }, /* Continue */
- { "g", "kgdbts_break_test", 0, check_and_rewind_pc },
+ { "g", "kgdbts_break_test", NULL, check_and_rewind_pc },
{ "write", "OK", write_regs },
{ "kgdbts_break_test", "OK", sw_rem_break }, /*remove breakpoint */
{ "D", "OK" }, /* Detach */
- { "D", "OK", 0, got_break }, /* If the test worked we made it here */
+ { "D", "OK", NULL, got_break }, /* On success we made it here */
{ "", "" },
};
@@ -499,14 +500,14 @@
{ "?", "S0*" }, /* Clear break points */
{ "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */
{ "c", "T0*", }, /* Continue */
- { "g", "kgdbts_break_test", 0, check_and_rewind_pc },
+ { "g", "kgdbts_break_test", NULL, check_and_rewind_pc },
{ "write", "OK", write_regs }, /* Write registers */
{ "kgdbts_break_test", "OK", sw_rem_break }, /*remove breakpoint */
{ "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
- { "g", "kgdbts_break_test", 0, check_single_step },
+ { "g", "kgdbts_break_test", NULL, check_single_step },
{ "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */
{ "c", "T0*", }, /* Continue */
- { "g", "kgdbts_break_test", 0, check_and_rewind_pc },
+ { "g", "kgdbts_break_test", NULL, check_and_rewind_pc },
{ "write", "OK", write_regs }, /* Write registers */
{ "D", "OK" }, /* Remove all breakpoints and continues */
{ "", "" },
@@ -520,14 +521,14 @@
{ "?", "S0*" }, /* Clear break points */
{ "do_fork", "OK", sw_break, }, /* set sw breakpoint */
{ "c", "T0*", }, /* Continue */
- { "g", "do_fork", 0, check_and_rewind_pc }, /* check location */
+ { "g", "do_fork", NULL, check_and_rewind_pc }, /* check location */
{ "write", "OK", write_regs }, /* Write registers */
{ "do_fork", "OK", sw_rem_break }, /*remove breakpoint */
{ "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
- { "g", "do_fork", 0, check_single_step },
+ { "g", "do_fork", NULL, check_single_step },
{ "do_fork", "OK", sw_break, }, /* set sw breakpoint */
{ "7", "T0*", skip_back_repeat_test }, /* Loop based on repeat_test */
- { "D", "OK", 0, final_ack_set }, /* detach and unregister I/O */
+ { "D", "OK", NULL, final_ack_set }, /* detach and unregister I/O */
{ "", "" },
};
@@ -538,14 +539,14 @@
{ "?", "S0*" }, /* Clear break points */
{ "sys_open", "OK", sw_break, }, /* set sw breakpoint */
{ "c", "T0*", }, /* Continue */
- { "g", "sys_open", 0, check_and_rewind_pc }, /* check location */
+ { "g", "sys_open", NULL, check_and_rewind_pc }, /* check location */
{ "write", "OK", write_regs }, /* Write registers */
{ "sys_open", "OK", sw_rem_break }, /*remove breakpoint */
{ "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
- { "g", "sys_open", 0, check_single_step },
+ { "g", "sys_open", NULL, check_single_step },
{ "sys_open", "OK", sw_break, }, /* set sw breakpoint */
{ "7", "T0*", skip_back_repeat_test }, /* Loop based on repeat_test */
- { "D", "OK", 0, final_ack_set }, /* detach and unregister I/O */
+ { "D", "OK", NULL, final_ack_set }, /* detach and unregister I/O */
{ "", "" },
};
@@ -556,11 +557,11 @@
{ "?", "S0*" }, /* Clear break points */
{ "kgdbts_break_test", "OK", hw_break, }, /* set hw breakpoint */
{ "c", "T0*", }, /* Continue */
- { "g", "kgdbts_break_test", 0, check_and_rewind_pc },
+ { "g", "kgdbts_break_test", NULL, check_and_rewind_pc },
{ "write", "OK", write_regs },
{ "kgdbts_break_test", "OK", hw_rem_break }, /*remove breakpoint */
{ "D", "OK" }, /* Detach */
- { "D", "OK", 0, got_break }, /* If the test worked we made it here */
+ { "D", "OK", NULL, got_break }, /* On success we made it here */
{ "", "" },
};
@@ -570,12 +571,12 @@
static struct test_struct hw_write_break_test[] = {
{ "?", "S0*" }, /* Clear break points */
{ "hw_break_val", "OK", hw_write_break, }, /* set hw breakpoint */
- { "c", "T0*", 0, got_break }, /* Continue */
- { "g", "silent", 0, check_and_rewind_pc },
+ { "c", "T0*", NULL, got_break }, /* Continue */
+ { "g", "silent", NULL, check_and_rewind_pc },
{ "write", "OK", write_regs },
{ "hw_break_val", "OK", hw_rem_write_break }, /*remove breakpoint */
{ "D", "OK" }, /* Detach */
- { "D", "OK", 0, got_break }, /* If the test worked we made it here */
+ { "D", "OK", NULL, got_break }, /* On success we made it here */
{ "", "" },
};
@@ -585,12 +586,12 @@
static struct test_struct hw_access_break_test[] = {
{ "?", "S0*" }, /* Clear break points */
{ "hw_break_val", "OK", hw_access_break, }, /* set hw breakpoint */
- { "c", "T0*", 0, got_break }, /* Continue */
- { "g", "silent", 0, check_and_rewind_pc },
+ { "c", "T0*", NULL, got_break }, /* Continue */
+ { "g", "silent", NULL, check_and_rewind_pc },
{ "write", "OK", write_regs },
{ "hw_break_val", "OK", hw_rem_access_break }, /*remove breakpoint */
{ "D", "OK" }, /* Detach */
- { "D", "OK", 0, got_break }, /* If the test worked we made it here */
+ { "D", "OK", NULL, got_break }, /* On success we made it here */
{ "", "" },
};
@@ -599,9 +600,9 @@
*/
static struct test_struct nmi_sleep_test[] = {
{ "?", "S0*" }, /* Clear break points */
- { "c", "T0*", 0, got_break }, /* Continue */
+ { "c", "T0*", NULL, got_break }, /* Continue */
{ "D", "OK" }, /* Detach */
- { "D", "OK", 0, got_break }, /* If the test worked we made it here */
+ { "D", "OK", NULL, got_break }, /* On success we made it here */
{ "", "" },
};
@@ -874,18 +875,23 @@
{
char *ptr;
int fork_test = 0;
- int sys_open_test = 0;
+ int do_sys_open_test = 0;
+ int sstep_test = 1000;
int nmi_sleep = 0;
+ int i;
ptr = strstr(config, "F");
if (ptr)
- fork_test = simple_strtol(ptr+1, NULL, 10);
+ fork_test = simple_strtol(ptr + 1, NULL, 10);
ptr = strstr(config, "S");
if (ptr)
- sys_open_test = simple_strtol(ptr+1, NULL, 10);
+ do_sys_open_test = simple_strtol(ptr + 1, NULL, 10);
ptr = strstr(config, "N");
if (ptr)
nmi_sleep = simple_strtol(ptr+1, NULL, 10);
+ ptr = strstr(config, "I");
+ if (ptr)
+ sstep_test = simple_strtol(ptr+1, NULL, 10);
/* required internal KGDB tests */
v1printk("kgdbts:RUN plant and detach test\n");
@@ -894,8 +900,13 @@
run_breakpoint_test(0);
v1printk("kgdbts:RUN bad memory access test\n");
run_bad_read_test();
- v1printk("kgdbts:RUN singlestep breakpoint test\n");
- run_singlestep_break_test();
+ v1printk("kgdbts:RUN singlestep test %i iterations\n", sstep_test);
+ for (i = 0; i < sstep_test; i++) {
+ run_singlestep_break_test();
+ if (i % 100 == 0)
+ v1printk("kgdbts:RUN singlestep [%i/%i]\n",
+ i, sstep_test);
+ }
/* ===Optional tests=== */
@@ -922,7 +933,7 @@
repeat_test = fork_test;
printk(KERN_INFO "kgdbts:RUN do_fork for %i breakpoints\n",
repeat_test);
- kthread_run(kgdbts_unreg_thread, 0, "kgdbts_unreg");
+ kthread_run(kgdbts_unreg_thread, NULL, "kgdbts_unreg");
run_do_fork_test();
return;
}
@@ -931,11 +942,11 @@
* executed because a kernel thread will be spawned at the very
* end to unregister the debug hooks.
*/
- if (sys_open_test) {
- repeat_test = sys_open_test;
+ if (do_sys_open_test) {
+ repeat_test = do_sys_open_test;
printk(KERN_INFO "kgdbts:RUN sys_open for %i breakpoints\n",
repeat_test);
- kthread_run(kgdbts_unreg_thread, 0, "kgdbts_unreg");
+ kthread_run(kgdbts_unreg_thread, NULL, "kgdbts_unreg");
run_sys_open_test();
return;
}
diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h
index 5515234..03a87a3 100644
--- a/drivers/misc/sgi-xp/xp.h
+++ b/drivers/misc/sgi-xp/xp.h
@@ -157,215 +157,136 @@
/*
* Define the return values and values passed to user's callout functions.
* (It is important to add new value codes at the end just preceding
- * xpcUnknownReason, which must have the highest numerical value.)
+ * xpUnknownReason, which must have the highest numerical value.)
*/
-enum xpc_retval {
- xpcSuccess = 0,
+enum xp_retval {
+ xpSuccess = 0,
- xpcNotConnected, /* 1: channel is not connected */
- xpcConnected, /* 2: channel connected (opened) */
- xpcRETIRED1, /* 3: (formerly xpcDisconnected) */
+ xpNotConnected, /* 1: channel is not connected */
+ xpConnected, /* 2: channel connected (opened) */
+ xpRETIRED1, /* 3: (formerly xpDisconnected) */
- xpcMsgReceived, /* 4: message received */
- xpcMsgDelivered, /* 5: message delivered and acknowledged */
+ xpMsgReceived, /* 4: message received */
+ xpMsgDelivered, /* 5: message delivered and acknowledged */
- xpcRETIRED2, /* 6: (formerly xpcTransferFailed) */
+ xpRETIRED2, /* 6: (formerly xpTransferFailed) */
- xpcNoWait, /* 7: operation would require wait */
- xpcRetry, /* 8: retry operation */
- xpcTimeout, /* 9: timeout in xpc_allocate_msg_wait() */
- xpcInterrupted, /* 10: interrupted wait */
+ xpNoWait, /* 7: operation would require wait */
+ xpRetry, /* 8: retry operation */
+ xpTimeout, /* 9: timeout in xpc_allocate_msg_wait() */
+ xpInterrupted, /* 10: interrupted wait */
- xpcUnequalMsgSizes, /* 11: message size disparity between sides */
- xpcInvalidAddress, /* 12: invalid address */
+ xpUnequalMsgSizes, /* 11: message size disparity between sides */
+ xpInvalidAddress, /* 12: invalid address */
- xpcNoMemory, /* 13: no memory available for XPC structures */
- xpcLackOfResources, /* 14: insufficient resources for operation */
- xpcUnregistered, /* 15: channel is not registered */
- xpcAlreadyRegistered, /* 16: channel is already registered */
+ xpNoMemory, /* 13: no memory available for XPC structures */
+ xpLackOfResources, /* 14: insufficient resources for operation */
+ xpUnregistered, /* 15: channel is not registered */
+ xpAlreadyRegistered, /* 16: channel is already registered */
- xpcPartitionDown, /* 17: remote partition is down */
- xpcNotLoaded, /* 18: XPC module is not loaded */
- xpcUnloading, /* 19: this side is unloading XPC module */
+ xpPartitionDown, /* 17: remote partition is down */
+ xpNotLoaded, /* 18: XPC module is not loaded */
+ xpUnloading, /* 19: this side is unloading XPC module */
- xpcBadMagic, /* 20: XPC MAGIC string not found */
+ xpBadMagic, /* 20: XPC MAGIC string not found */
- xpcReactivating, /* 21: remote partition was reactivated */
+ xpReactivating, /* 21: remote partition was reactivated */
- xpcUnregistering, /* 22: this side is unregistering channel */
- xpcOtherUnregistering, /* 23: other side is unregistering channel */
+ xpUnregistering, /* 22: this side is unregistering channel */
+ xpOtherUnregistering, /* 23: other side is unregistering channel */
- xpcCloneKThread, /* 24: cloning kernel thread */
- xpcCloneKThreadFailed, /* 25: cloning kernel thread failed */
+ xpCloneKThread, /* 24: cloning kernel thread */
+ xpCloneKThreadFailed, /* 25: cloning kernel thread failed */
- xpcNoHeartbeat, /* 26: remote partition has no heartbeat */
+ xpNoHeartbeat, /* 26: remote partition has no heartbeat */
- xpcPioReadError, /* 27: PIO read error */
- xpcPhysAddrRegFailed, /* 28: registration of phys addr range failed */
+ xpPioReadError, /* 27: PIO read error */
+ xpPhysAddrRegFailed, /* 28: registration of phys addr range failed */
- xpcBteDirectoryError, /* 29: maps to BTEFAIL_DIR */
- xpcBtePoisonError, /* 30: maps to BTEFAIL_POISON */
- xpcBteWriteError, /* 31: maps to BTEFAIL_WERR */
- xpcBteAccessError, /* 32: maps to BTEFAIL_ACCESS */
- xpcBtePWriteError, /* 33: maps to BTEFAIL_PWERR */
- xpcBtePReadError, /* 34: maps to BTEFAIL_PRERR */
- xpcBteTimeOutError, /* 35: maps to BTEFAIL_TOUT */
- xpcBteXtalkError, /* 36: maps to BTEFAIL_XTERR */
- xpcBteNotAvailable, /* 37: maps to BTEFAIL_NOTAVAIL */
- xpcBteUnmappedError, /* 38: unmapped BTEFAIL_ error */
+ xpRETIRED3, /* 29: (formerly xpBteDirectoryError) */
+ xpRETIRED4, /* 30: (formerly xpBtePoisonError) */
+ xpRETIRED5, /* 31: (formerly xpBteWriteError) */
+ xpRETIRED6, /* 32: (formerly xpBteAccessError) */
+ xpRETIRED7, /* 33: (formerly xpBtePWriteError) */
+ xpRETIRED8, /* 34: (formerly xpBtePReadError) */
+ xpRETIRED9, /* 35: (formerly xpBteTimeOutError) */
+ xpRETIRED10, /* 36: (formerly xpBteXtalkError) */
+ xpRETIRED11, /* 37: (formerly xpBteNotAvailable) */
+ xpRETIRED12, /* 38: (formerly xpBteUnmappedError) */
- xpcBadVersion, /* 39: bad version number */
- xpcVarsNotSet, /* 40: the XPC variables are not set up */
- xpcNoRsvdPageAddr, /* 41: unable to get rsvd page's phys addr */
- xpcInvalidPartid, /* 42: invalid partition ID */
- xpcLocalPartid, /* 43: local partition ID */
+ xpBadVersion, /* 39: bad version number */
+ xpVarsNotSet, /* 40: the XPC variables are not set up */
+ xpNoRsvdPageAddr, /* 41: unable to get rsvd page's phys addr */
+ xpInvalidPartid, /* 42: invalid partition ID */
+ xpLocalPartid, /* 43: local partition ID */
- xpcOtherGoingDown, /* 44: other side going down, reason unknown */
- xpcSystemGoingDown, /* 45: system is going down, reason unknown */
- xpcSystemHalt, /* 46: system is being halted */
- xpcSystemReboot, /* 47: system is being rebooted */
- xpcSystemPoweroff, /* 48: system is being powered off */
+ xpOtherGoingDown, /* 44: other side going down, reason unknown */
+ xpSystemGoingDown, /* 45: system is going down, reason unknown */
+ xpSystemHalt, /* 46: system is being halted */
+ xpSystemReboot, /* 47: system is being rebooted */
+ xpSystemPoweroff, /* 48: system is being powered off */
- xpcDisconnecting, /* 49: channel disconnecting (closing) */
+ xpDisconnecting, /* 49: channel disconnecting (closing) */
- xpcOpenCloseError, /* 50: channel open/close protocol error */
+ xpOpenCloseError, /* 50: channel open/close protocol error */
- xpcDisconnected, /* 51: channel disconnected (closed) */
+ xpDisconnected, /* 51: channel disconnected (closed) */
- xpcBteSh2Start, /* 52: BTE CRB timeout */
+ xpBteCopyError, /* 52: bte_copy() returned error */
- /* 53: 0x1 BTE Error Response Short */
- xpcBteSh2RspShort = xpcBteSh2Start + BTEFAIL_SH2_RESP_SHORT,
-
- /* 54: 0x2 BTE Error Response Long */
- xpcBteSh2RspLong = xpcBteSh2Start + BTEFAIL_SH2_RESP_LONG,
-
- /* 56: 0x4 BTE Error Response DSB */
- xpcBteSh2RspDSB = xpcBteSh2Start + BTEFAIL_SH2_RESP_DSP,
-
- /* 60: 0x8 BTE Error Response Access */
- xpcBteSh2RspAccess = xpcBteSh2Start + BTEFAIL_SH2_RESP_ACCESS,
-
- /* 68: 0x10 BTE Error CRB timeout */
- xpcBteSh2CRBTO = xpcBteSh2Start + BTEFAIL_SH2_CRB_TO,
-
- /* 84: 0x20 BTE Error NACK limit */
- xpcBteSh2NACKLimit = xpcBteSh2Start + BTEFAIL_SH2_NACK_LIMIT,
-
- /* 115: BTE end */
- xpcBteSh2End = xpcBteSh2Start + BTEFAIL_SH2_ALL,
-
- xpcUnknownReason /* 116: unknown reason - must be last in enum */
+ xpUnknownReason /* 53: unknown reason - must be last in enum */
};
/*
- * Define the callout function types used by XPC to update the user on
- * connection activity and state changes (via the user function registered by
- * xpc_connect()) and to notify them of messages received and delivered (via
- * the user function registered by xpc_send_notify()).
- *
- * The two function types are xpc_channel_func and xpc_notify_func and
- * both share the following arguments, with the exception of "data", which
- * only xpc_channel_func has.
+ * Define the callout function type used by XPC to update the user on
+ * connection activity and state changes via the user function registered
+ * by xpc_connect().
*
* Arguments:
*
- * reason - reason code. (See following table.)
+ * reason - reason code.
* partid - partition ID associated with condition.
* ch_number - channel # associated with condition.
- * data - pointer to optional data. (See following table.)
+ * data - pointer to optional data.
* key - pointer to optional user-defined value provided as the "key"
- * argument to xpc_connect() or xpc_send_notify().
+ * argument to xpc_connect().
*
- * In the following table the "Optional Data" column applies to callouts made
- * to functions registered by xpc_connect(). A "NA" in that column indicates
- * that this reason code can be passed to functions registered by
- * xpc_send_notify() (i.e. they don't have data arguments).
+ * A reason code of xpConnected indicates that a connection has been
+ * established to the specified partition on the specified channel. The data
+ * argument indicates the max number of entries allowed in the message queue.
*
- * Also, the first three reason codes in the following table indicate
- * success, whereas the others indicate failure. When a failure reason code
- * is received, one can assume that the channel is not connected.
+ * A reason code of xpMsgReceived indicates that a XPC message arrived from
+ * the specified partition on the specified channel. The data argument
+ * specifies the address of the message's payload. The user must call
+ * xpc_received() when finished with the payload.
*
- *
- * Reason Code | Cause | Optional Data
- * =====================+================================+=====================
- * xpcConnected | connection has been established| max #of entries
- * | to the specified partition on | allowed in message
- * | the specified channel | queue
- * ---------------------+--------------------------------+---------------------
- * xpcMsgReceived | an XPC message arrived from | address of payload
- * | the specified partition on the |
- * | specified channel | [the user must call
- * | | xpc_received() when
- * | | finished with the
- * | | payload]
- * ---------------------+--------------------------------+---------------------
- * xpcMsgDelivered | notification that the message | NA
- * | was delivered to the intended |
- * | recipient and that they have |
- * | acknowledged its receipt by |
- * | calling xpc_received() |
- * =====================+================================+=====================
- * xpcUnequalMsgSizes | can't connect to the specified | NULL
- * | partition on the specified |
- * | channel because of mismatched |
- * | message sizes |
- * ---------------------+--------------------------------+---------------------
- * xpcNoMemory | insufficient memory avaiable | NULL
- * | to allocate message queue |
- * ---------------------+--------------------------------+---------------------
- * xpcLackOfResources | lack of resources to create | NULL
- * | the necessary kthreads to |
- * | support the channel |
- * ---------------------+--------------------------------+---------------------
- * xpcUnregistering | this side's user has | NULL or NA
- * | unregistered by calling |
- * | xpc_disconnect() |
- * ---------------------+--------------------------------+---------------------
- * xpcOtherUnregistering| the other side's user has | NULL or NA
- * | unregistered by calling |
- * | xpc_disconnect() |
- * ---------------------+--------------------------------+---------------------
- * xpcNoHeartbeat | the other side's XPC is no | NULL or NA
- * | longer heartbeating |
- * | |
- * ---------------------+--------------------------------+---------------------
- * xpcUnloading | this side's XPC module is | NULL or NA
- * | being unloaded |
- * | |
- * ---------------------+--------------------------------+---------------------
- * xpcOtherUnloading | the other side's XPC module is | NULL or NA
- * | is being unloaded |
- * | |
- * ---------------------+--------------------------------+---------------------
- * xpcPioReadError | xp_nofault_PIOR() returned an | NULL or NA
- * | error while sending an IPI |
- * | |
- * ---------------------+--------------------------------+---------------------
- * xpcInvalidAddress | the address either received or | NULL or NA
- * | sent by the specified partition|
- * | is invalid |
- * ---------------------+--------------------------------+---------------------
- * xpcBteNotAvailable | attempt to pull data from the | NULL or NA
- * xpcBtePoisonError | specified partition over the |
- * xpcBteWriteError | specified channel via a |
- * xpcBteAccessError | bte_copy() failed |
- * xpcBteTimeOutError | |
- * xpcBteXtalkError | |
- * xpcBteDirectoryError | |
- * xpcBteGenericError | |
- * xpcBteUnmappedError | |
- * ---------------------+--------------------------------+---------------------
- * xpcUnknownReason | the specified channel to the | NULL or NA
- * | specified partition was |
- * | unavailable for unknown reasons|
- * =====================+================================+=====================
+ * All other reason codes indicate failure. The data argmument is NULL.
+ * When a failure reason code is received, one can assume that the channel
+ * is not connected.
*/
-
-typedef void (*xpc_channel_func) (enum xpc_retval reason, partid_t partid,
+typedef void (*xpc_channel_func) (enum xp_retval reason, short partid,
int ch_number, void *data, void *key);
-typedef void (*xpc_notify_func) (enum xpc_retval reason, partid_t partid,
+/*
+ * Define the callout function type used by XPC to notify the user of
+ * messages received and delivered via the user function registered by
+ * xpc_send_notify().
+ *
+ * Arguments:
+ *
+ * reason - reason code.
+ * partid - partition ID associated with condition.
+ * ch_number - channel # associated with condition.
+ * key - pointer to optional user-defined value provided as the "key"
+ * argument to xpc_send_notify().
+ *
+ * A reason code of xpMsgDelivered indicates that the message was delivered
+ * to the intended recipient and that they have acknowledged its receipt by
+ * calling xpc_received().
+ *
+ * All other reason codes indicate failure.
+ */
+typedef void (*xpc_notify_func) (enum xp_retval reason, short partid,
int ch_number, void *key);
/*
@@ -401,57 +322,57 @@
struct xpc_interface {
void (*connect) (int);
void (*disconnect) (int);
- enum xpc_retval (*allocate) (partid_t, int, u32, void **);
- enum xpc_retval (*send) (partid_t, int, void *);
- enum xpc_retval (*send_notify) (partid_t, int, void *,
+ enum xp_retval (*allocate) (short, int, u32, void **);
+ enum xp_retval (*send) (short, int, void *);
+ enum xp_retval (*send_notify) (short, int, void *,
xpc_notify_func, void *);
- void (*received) (partid_t, int, void *);
- enum xpc_retval (*partid_to_nasids) (partid_t, void *);
+ void (*received) (short, int, void *);
+ enum xp_retval (*partid_to_nasids) (short, void *);
};
extern struct xpc_interface xpc_interface;
extern void xpc_set_interface(void (*)(int),
void (*)(int),
- enum xpc_retval (*)(partid_t, int, u32, void **),
- enum xpc_retval (*)(partid_t, int, void *),
- enum xpc_retval (*)(partid_t, int, void *,
+ enum xp_retval (*)(short, int, u32, void **),
+ enum xp_retval (*)(short, int, void *),
+ enum xp_retval (*)(short, int, void *,
xpc_notify_func, void *),
- void (*)(partid_t, int, void *),
- enum xpc_retval (*)(partid_t, void *));
+ void (*)(short, int, void *),
+ enum xp_retval (*)(short, void *));
extern void xpc_clear_interface(void);
-extern enum xpc_retval xpc_connect(int, xpc_channel_func, void *, u16,
+extern enum xp_retval xpc_connect(int, xpc_channel_func, void *, u16,
u16, u32, u32);
extern void xpc_disconnect(int);
-static inline enum xpc_retval
-xpc_allocate(partid_t partid, int ch_number, u32 flags, void **payload)
+static inline enum xp_retval
+xpc_allocate(short partid, int ch_number, u32 flags, void **payload)
{
return xpc_interface.allocate(partid, ch_number, flags, payload);
}
-static inline enum xpc_retval
-xpc_send(partid_t partid, int ch_number, void *payload)
+static inline enum xp_retval
+xpc_send(short partid, int ch_number, void *payload)
{
return xpc_interface.send(partid, ch_number, payload);
}
-static inline enum xpc_retval
-xpc_send_notify(partid_t partid, int ch_number, void *payload,
+static inline enum xp_retval
+xpc_send_notify(short partid, int ch_number, void *payload,
xpc_notify_func func, void *key)
{
return xpc_interface.send_notify(partid, ch_number, payload, func, key);
}
static inline void
-xpc_received(partid_t partid, int ch_number, void *payload)
+xpc_received(short partid, int ch_number, void *payload)
{
return xpc_interface.received(partid, ch_number, payload);
}
-static inline enum xpc_retval
-xpc_partid_to_nasids(partid_t partid, void *nasids)
+static inline enum xp_retval
+xpc_partid_to_nasids(short partid, void *nasids)
{
return xpc_interface.partid_to_nasids(partid, nasids);
}
diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c
index 1fbf99b..196480b 100644
--- a/drivers/misc/sgi-xp/xp_main.c
+++ b/drivers/misc/sgi-xp/xp_main.c
@@ -42,21 +42,21 @@
/*
* Initialize the XPC interface to indicate that XPC isn't loaded.
*/
-static enum xpc_retval
+static enum xp_retval
xpc_notloaded(void)
{
- return xpcNotLoaded;
+ return xpNotLoaded;
}
struct xpc_interface xpc_interface = {
(void (*)(int))xpc_notloaded,
(void (*)(int))xpc_notloaded,
- (enum xpc_retval(*)(partid_t, int, u32, void **))xpc_notloaded,
- (enum xpc_retval(*)(partid_t, int, void *))xpc_notloaded,
- (enum xpc_retval(*)(partid_t, int, void *, xpc_notify_func, void *))
+ (enum xp_retval(*)(short, int, u32, void **))xpc_notloaded,
+ (enum xp_retval(*)(short, int, void *))xpc_notloaded,
+ (enum xp_retval(*)(short, int, void *, xpc_notify_func, void *))
xpc_notloaded,
- (void (*)(partid_t, int, void *))xpc_notloaded,
- (enum xpc_retval(*)(partid_t, void *))xpc_notloaded
+ (void (*)(short, int, void *))xpc_notloaded,
+ (enum xp_retval(*)(short, void *))xpc_notloaded
};
EXPORT_SYMBOL_GPL(xpc_interface);
@@ -66,12 +66,12 @@
void
xpc_set_interface(void (*connect) (int),
void (*disconnect) (int),
- enum xpc_retval (*allocate) (partid_t, int, u32, void **),
- enum xpc_retval (*send) (partid_t, int, void *),
- enum xpc_retval (*send_notify) (partid_t, int, void *,
+ enum xp_retval (*allocate) (short, int, u32, void **),
+ enum xp_retval (*send) (short, int, void *),
+ enum xp_retval (*send_notify) (short, int, void *,
xpc_notify_func, void *),
- void (*received) (partid_t, int, void *),
- enum xpc_retval (*partid_to_nasids) (partid_t, void *))
+ void (*received) (short, int, void *),
+ enum xp_retval (*partid_to_nasids) (short, void *))
{
xpc_interface.connect = connect;
xpc_interface.disconnect = disconnect;
@@ -91,16 +91,16 @@
{
xpc_interface.connect = (void (*)(int))xpc_notloaded;
xpc_interface.disconnect = (void (*)(int))xpc_notloaded;
- xpc_interface.allocate = (enum xpc_retval(*)(partid_t, int, u32,
+ xpc_interface.allocate = (enum xp_retval(*)(short, int, u32,
void **))xpc_notloaded;
- xpc_interface.send = (enum xpc_retval(*)(partid_t, int, void *))
+ xpc_interface.send = (enum xp_retval(*)(short, int, void *))
xpc_notloaded;
- xpc_interface.send_notify = (enum xpc_retval(*)(partid_t, int, void *,
+ xpc_interface.send_notify = (enum xp_retval(*)(short, int, void *,
xpc_notify_func,
void *))xpc_notloaded;
- xpc_interface.received = (void (*)(partid_t, int, void *))
+ xpc_interface.received = (void (*)(short, int, void *))
xpc_notloaded;
- xpc_interface.partid_to_nasids = (enum xpc_retval(*)(partid_t, void *))
+ xpc_interface.partid_to_nasids = (enum xp_retval(*)(short, void *))
xpc_notloaded;
}
EXPORT_SYMBOL_GPL(xpc_clear_interface);
@@ -123,13 +123,13 @@
* nentries - max #of XPC message entries a message queue can contain.
* The actual number, which is determined when a connection
* is established and may be less then requested, will be
- * passed to the user via the xpcConnected callout.
+ * passed to the user via the xpConnected callout.
* assigned_limit - max number of kthreads allowed to be processing
* messages (per connection) at any given instant.
* idle_limit - max number of kthreads allowed to be idle at any given
* instant.
*/
-enum xpc_retval
+enum xp_retval
xpc_connect(int ch_number, xpc_channel_func func, void *key, u16 payload_size,
u16 nentries, u32 assigned_limit, u32 idle_limit)
{
@@ -143,12 +143,12 @@
registration = &xpc_registrations[ch_number];
if (mutex_lock_interruptible(®istration->mutex) != 0)
- return xpcInterrupted;
+ return xpInterrupted;
/* if XPC_CHANNEL_REGISTERED(ch_number) */
if (registration->func != NULL) {
mutex_unlock(®istration->mutex);
- return xpcAlreadyRegistered;
+ return xpAlreadyRegistered;
}
/* register the channel for connection */
@@ -163,7 +163,7 @@
xpc_interface.connect(ch_number);
- return xpcSuccess;
+ return xpSuccess;
}
EXPORT_SYMBOL_GPL(xpc_connect);
diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h
index 9eb6d4a..11ac267e 100644
--- a/drivers/misc/sgi-xp/xpc.h
+++ b/drivers/misc/sgi-xp/xpc.h
@@ -172,13 +172,13 @@
(_version >= _XPC_VERSION(3, 1))
static inline int
-xpc_hb_allowed(partid_t partid, struct xpc_vars *vars)
+xpc_hb_allowed(short partid, struct xpc_vars *vars)
{
return ((vars->heartbeating_to_mask & (1UL << partid)) != 0);
}
static inline void
-xpc_allow_hb(partid_t partid, struct xpc_vars *vars)
+xpc_allow_hb(short partid, struct xpc_vars *vars)
{
u64 old_mask, new_mask;
@@ -190,7 +190,7 @@
}
static inline void
-xpc_disallow_hb(partid_t partid, struct xpc_vars *vars)
+xpc_disallow_hb(short partid, struct xpc_vars *vars)
{
u64 old_mask, new_mask;
@@ -408,11 +408,11 @@
* messages.
*/
struct xpc_channel {
- partid_t partid; /* ID of remote partition connected */
+ short partid; /* ID of remote partition connected */
spinlock_t lock; /* lock for updating this structure */
u32 flags; /* general flags */
- enum xpc_retval reason; /* reason why channel is disconnect'g */
+ enum xp_retval reason; /* reason why channel is disconnect'g */
int reason_line; /* line# disconnect initiated from */
u16 number; /* channel # */
@@ -522,7 +522,7 @@
spinlock_t act_lock; /* protect updating of act_state */
u8 act_state; /* from XPC HB viewpoint */
u8 remote_vars_version; /* version# of partition's vars */
- enum xpc_retval reason; /* reason partition is deactivating */
+ enum xp_retval reason; /* reason partition is deactivating */
int reason_line; /* line# deactivation initiated from */
int reactivate_nasid; /* nasid in partition to reactivate */
@@ -615,7 +615,7 @@
/* interval in seconds to print 'waiting disengagement' messages */
#define XPC_DISENGAGE_PRINTMSG_INTERVAL 10
-#define XPC_PARTID(_p) ((partid_t) ((_p) - &xpc_partitions[0]))
+#define XPC_PARTID(_p) ((short)((_p) - &xpc_partitions[0]))
/* found in xp_main.c */
extern struct xpc_registration xpc_registrations[];
@@ -646,31 +646,31 @@
extern void xpc_restrict_IPI_ops(void);
extern int xpc_identify_act_IRQ_sender(void);
extern int xpc_partition_disengaged(struct xpc_partition *);
-extern enum xpc_retval xpc_mark_partition_active(struct xpc_partition *);
+extern enum xp_retval xpc_mark_partition_active(struct xpc_partition *);
extern void xpc_mark_partition_inactive(struct xpc_partition *);
extern void xpc_discovery(void);
extern void xpc_check_remote_hb(void);
extern void xpc_deactivate_partition(const int, struct xpc_partition *,
- enum xpc_retval);
-extern enum xpc_retval xpc_initiate_partid_to_nasids(partid_t, void *);
+ enum xp_retval);
+extern enum xp_retval xpc_initiate_partid_to_nasids(short, void *);
/* found in xpc_channel.c */
extern void xpc_initiate_connect(int);
extern void xpc_initiate_disconnect(int);
-extern enum xpc_retval xpc_initiate_allocate(partid_t, int, u32, void **);
-extern enum xpc_retval xpc_initiate_send(partid_t, int, void *);
-extern enum xpc_retval xpc_initiate_send_notify(partid_t, int, void *,
- xpc_notify_func, void *);
-extern void xpc_initiate_received(partid_t, int, void *);
-extern enum xpc_retval xpc_setup_infrastructure(struct xpc_partition *);
-extern enum xpc_retval xpc_pull_remote_vars_part(struct xpc_partition *);
+extern enum xp_retval xpc_initiate_allocate(short, int, u32, void **);
+extern enum xp_retval xpc_initiate_send(short, int, void *);
+extern enum xp_retval xpc_initiate_send_notify(short, int, void *,
+ xpc_notify_func, void *);
+extern void xpc_initiate_received(short, int, void *);
+extern enum xp_retval xpc_setup_infrastructure(struct xpc_partition *);
+extern enum xp_retval xpc_pull_remote_vars_part(struct xpc_partition *);
extern void xpc_process_channel_activity(struct xpc_partition *);
extern void xpc_connected_callout(struct xpc_channel *);
extern void xpc_deliver_msg(struct xpc_channel *);
extern void xpc_disconnect_channel(const int, struct xpc_channel *,
- enum xpc_retval, unsigned long *);
-extern void xpc_disconnect_callout(struct xpc_channel *, enum xpc_retval);
-extern void xpc_partition_going_down(struct xpc_partition *, enum xpc_retval);
+ enum xp_retval, unsigned long *);
+extern void xpc_disconnect_callout(struct xpc_channel *, enum xp_retval);
+extern void xpc_partition_going_down(struct xpc_partition *, enum xp_retval);
extern void xpc_teardown_infrastructure(struct xpc_partition *);
static inline void
@@ -901,7 +901,7 @@
return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_CLEAR);
}
-static inline enum xpc_retval
+static inline enum xp_retval
xpc_IPI_send(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector)
{
int ret = 0;
@@ -923,7 +923,7 @@
local_irq_restore(irq_flags);
- return ((ret == 0) ? xpcSuccess : xpcPioReadError);
+ return ((ret == 0) ? xpSuccess : xpPioReadError);
}
/*
@@ -992,7 +992,7 @@
unsigned long *irq_flags)
{
struct xpc_partition *part = &xpc_partitions[ch->partid];
- enum xpc_retval ret;
+ enum xp_retval ret;
if (likely(part->act_state != XPC_P_DEACTIVATING)) {
ret = xpc_IPI_send(part->remote_IPI_amo_va,
@@ -1001,7 +1001,7 @@
part->remote_IPI_phys_cpuid, SGI_XPC_NOTIFY);
dev_dbg(xpc_chan, "%s sent to partid=%d, channel=%d, ret=%d\n",
ipi_flag_string, ch->partid, ch->number, ret);
- if (unlikely(ret != xpcSuccess)) {
+ if (unlikely(ret != xpSuccess)) {
if (irq_flags != NULL)
spin_unlock_irqrestore(&ch->lock, *irq_flags);
XPC_DEACTIVATE_PARTITION(part, ret);
@@ -1123,41 +1123,10 @@
return amo;
}
-static inline enum xpc_retval
+static inline enum xp_retval
xpc_map_bte_errors(bte_result_t error)
{
- if (error == BTE_SUCCESS)
- return xpcSuccess;
-
- if (is_shub2()) {
- if (BTE_VALID_SH2_ERROR(error))
- return xpcBteSh2Start + error;
- return xpcBteUnmappedError;
- }
- switch (error) {
- case BTE_SUCCESS:
- return xpcSuccess;
- case BTEFAIL_DIR:
- return xpcBteDirectoryError;
- case BTEFAIL_POISON:
- return xpcBtePoisonError;
- case BTEFAIL_WERR:
- return xpcBteWriteError;
- case BTEFAIL_ACCESS:
- return xpcBteAccessError;
- case BTEFAIL_PWERR:
- return xpcBtePWriteError;
- case BTEFAIL_PRERR:
- return xpcBtePReadError;
- case BTEFAIL_TOUT:
- return xpcBteTimeOutError;
- case BTEFAIL_XTERR:
- return xpcBteXtalkError;
- case BTEFAIL_NOTAVAIL:
- return xpcBteNotAvailable;
- default:
- return xpcBteUnmappedError;
- }
+ return ((error == BTE_SUCCESS) ? xpSuccess : xpBteCopyError);
}
/*
diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c
index bfcb9ea..9c90c2d 100644
--- a/drivers/misc/sgi-xp/xpc_channel.c
+++ b/drivers/misc/sgi-xp/xpc_channel.c
@@ -53,7 +53,7 @@
* Set up the initial values for the XPartition Communication channels.
*/
static void
-xpc_initialize_channels(struct xpc_partition *part, partid_t partid)
+xpc_initialize_channels(struct xpc_partition *part, short partid)
{
int ch_number;
struct xpc_channel *ch;
@@ -90,12 +90,12 @@
* Setup the infrastructure necessary to support XPartition Communication
* between the specified remote partition and the local one.
*/
-enum xpc_retval
+enum xp_retval
xpc_setup_infrastructure(struct xpc_partition *part)
{
int ret, cpuid;
struct timer_list *timer;
- partid_t partid = XPC_PARTID(part);
+ short partid = XPC_PARTID(part);
/*
* Zero out MOST of the entry for this partition. Only the fields
@@ -114,7 +114,7 @@
GFP_KERNEL);
if (part->channels == NULL) {
dev_err(xpc_chan, "can't get memory for channels\n");
- return xpcNoMemory;
+ return xpNoMemory;
}
part->nchannels = XPC_NCHANNELS;
@@ -129,7 +129,7 @@
part->channels = NULL;
dev_err(xpc_chan, "can't get memory for local get/put "
"values\n");
- return xpcNoMemory;
+ return xpNoMemory;
}
part->remote_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE,
@@ -143,7 +143,7 @@
part->local_GPs = NULL;
kfree(part->channels);
part->channels = NULL;
- return xpcNoMemory;
+ return xpNoMemory;
}
/* allocate all the required open and close args */
@@ -159,7 +159,7 @@
part->local_GPs = NULL;
kfree(part->channels);
part->channels = NULL;
- return xpcNoMemory;
+ return xpNoMemory;
}
part->remote_openclose_args =
@@ -175,7 +175,7 @@
part->local_GPs = NULL;
kfree(part->channels);
part->channels = NULL;
- return xpcNoMemory;
+ return xpNoMemory;
}
xpc_initialize_channels(part, partid);
@@ -209,7 +209,7 @@
part->local_GPs = NULL;
kfree(part->channels);
part->channels = NULL;
- return xpcLackOfResources;
+ return xpLackOfResources;
}
/* Setup a timer to check for dropped IPIs */
@@ -243,7 +243,7 @@
xpc_vars_part[partid].nchannels = part->nchannels;
xpc_vars_part[partid].magic = XPC_VP_MAGIC1;
- return xpcSuccess;
+ return xpSuccess;
}
/*
@@ -254,7 +254,7 @@
* dst must be a cacheline aligned virtual address on this partition.
* cnt must be an cacheline sized
*/
-static enum xpc_retval
+static enum xp_retval
xpc_pull_remote_cachelines(struct xpc_partition *part, void *dst,
const void *src, size_t cnt)
{
@@ -270,7 +270,7 @@
bte_ret = xp_bte_copy((u64)src, (u64)dst, (u64)cnt,
(BTE_NORMAL | BTE_WACQUIRE), NULL);
if (bte_ret == BTE_SUCCESS)
- return xpcSuccess;
+ return xpSuccess;
dev_dbg(xpc_chan, "xp_bte_copy() from partition %d failed, ret=%d\n",
XPC_PARTID(part), bte_ret);
@@ -282,7 +282,7 @@
* Pull the remote per partition specific variables from the specified
* partition.
*/
-enum xpc_retval
+enum xp_retval
xpc_pull_remote_vars_part(struct xpc_partition *part)
{
u8 buffer[L1_CACHE_BYTES * 2];
@@ -290,8 +290,8 @@
(struct xpc_vars_part *)L1_CACHE_ALIGN((u64)buffer);
struct xpc_vars_part *pulled_entry;
u64 remote_entry_cacheline_pa, remote_entry_pa;
- partid_t partid = XPC_PARTID(part);
- enum xpc_retval ret;
+ short partid = XPC_PARTID(part);
+ enum xp_retval ret;
/* pull the cacheline that contains the variables we're interested in */
@@ -311,7 +311,7 @@
ret = xpc_pull_remote_cachelines(part, pulled_entry_cacheline,
(void *)remote_entry_cacheline_pa,
L1_CACHE_BYTES);
- if (ret != xpcSuccess) {
+ if (ret != xpSuccess) {
dev_dbg(xpc_chan, "failed to pull XPC vars_part from "
"partition %d, ret=%d\n", partid, ret);
return ret;
@@ -326,11 +326,11 @@
dev_dbg(xpc_chan, "partition %d's XPC vars_part for "
"partition %d has bad magic value (=0x%lx)\n",
partid, sn_partition_id, pulled_entry->magic);
- return xpcBadMagic;
+ return xpBadMagic;
}
/* they've not been initialized yet */
- return xpcRetry;
+ return xpRetry;
}
if (xpc_vars_part[partid].magic == XPC_VP_MAGIC1) {
@@ -344,7 +344,7 @@
dev_err(xpc_chan, "partition %d's XPC vars_part for "
"partition %d are not valid\n", partid,
sn_partition_id);
- return xpcInvalidAddress;
+ return xpInvalidAddress;
}
/* the variables we imported look to be valid */
@@ -366,9 +366,9 @@
}
if (pulled_entry->magic == XPC_VP_MAGIC1)
- return xpcRetry;
+ return xpRetry;
- return xpcSuccess;
+ return xpSuccess;
}
/*
@@ -379,7 +379,7 @@
{
unsigned long irq_flags;
u64 IPI_amo;
- enum xpc_retval ret;
+ enum xp_retval ret;
/*
* See if there are any IPI flags to be handled.
@@ -398,7 +398,7 @@
(void *)part->
remote_openclose_args_pa,
XPC_OPENCLOSE_ARGS_SIZE);
- if (ret != xpcSuccess) {
+ if (ret != xpSuccess) {
XPC_DEACTIVATE_PARTITION(part, ret);
dev_dbg(xpc_chan, "failed to pull openclose args from "
@@ -414,7 +414,7 @@
ret = xpc_pull_remote_cachelines(part, part->remote_GPs,
(void *)part->remote_GPs_pa,
XPC_GP_SIZE);
- if (ret != xpcSuccess) {
+ if (ret != xpSuccess) {
XPC_DEACTIVATE_PARTITION(part, ret);
dev_dbg(xpc_chan, "failed to pull GPs from partition "
@@ -431,7 +431,7 @@
/*
* Allocate the local message queue and the notify queue.
*/
-static enum xpc_retval
+static enum xp_retval
xpc_allocate_local_msgqueue(struct xpc_channel *ch)
{
unsigned long irq_flags;
@@ -464,18 +464,18 @@
ch->local_nentries = nentries;
}
spin_unlock_irqrestore(&ch->lock, irq_flags);
- return xpcSuccess;
+ return xpSuccess;
}
dev_dbg(xpc_chan, "can't get memory for local message queue and notify "
"queue, partid=%d, channel=%d\n", ch->partid, ch->number);
- return xpcNoMemory;
+ return xpNoMemory;
}
/*
* Allocate the cached remote message queue.
*/
-static enum xpc_retval
+static enum xp_retval
xpc_allocate_remote_msgqueue(struct xpc_channel *ch)
{
unsigned long irq_flags;
@@ -502,12 +502,12 @@
ch->remote_nentries = nentries;
}
spin_unlock_irqrestore(&ch->lock, irq_flags);
- return xpcSuccess;
+ return xpSuccess;
}
dev_dbg(xpc_chan, "can't get memory for cached remote message queue, "
"partid=%d, channel=%d\n", ch->partid, ch->number);
- return xpcNoMemory;
+ return xpNoMemory;
}
/*
@@ -515,20 +515,20 @@
*
* Note: Assumes all of the channel sizes are filled in.
*/
-static enum xpc_retval
+static enum xp_retval
xpc_allocate_msgqueues(struct xpc_channel *ch)
{
unsigned long irq_flags;
- enum xpc_retval ret;
+ enum xp_retval ret;
DBUG_ON(ch->flags & XPC_C_SETUP);
ret = xpc_allocate_local_msgqueue(ch);
- if (ret != xpcSuccess)
+ if (ret != xpSuccess)
return ret;
ret = xpc_allocate_remote_msgqueue(ch);
- if (ret != xpcSuccess) {
+ if (ret != xpSuccess) {
kfree(ch->local_msgqueue_base);
ch->local_msgqueue = NULL;
kfree(ch->notify_queue);
@@ -540,7 +540,7 @@
ch->flags |= XPC_C_SETUP;
spin_unlock_irqrestore(&ch->lock, irq_flags);
- return xpcSuccess;
+ return xpSuccess;
}
/*
@@ -552,7 +552,7 @@
static void
xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
{
- enum xpc_retval ret;
+ enum xp_retval ret;
DBUG_ON(!spin_is_locked(&ch->lock));
@@ -568,7 +568,7 @@
ret = xpc_allocate_msgqueues(ch);
spin_lock_irqsave(&ch->lock, *irq_flags);
- if (ret != xpcSuccess)
+ if (ret != xpSuccess)
XPC_DISCONNECT_CHANNEL(ch, ret, irq_flags);
if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING))
@@ -603,7 +603,7 @@
* Notify those who wanted to be notified upon delivery of their message.
*/
static void
-xpc_notify_senders(struct xpc_channel *ch, enum xpc_retval reason, s64 put)
+xpc_notify_senders(struct xpc_channel *ch, enum xp_retval reason, s64 put)
{
struct xpc_notify *notify;
u8 notify_type;
@@ -748,7 +748,7 @@
if (ch->flags & XPC_C_DISCONNECTINGCALLOUT_MADE) {
spin_unlock_irqrestore(&ch->lock, *irq_flags);
- xpc_disconnect_callout(ch, xpcDisconnected);
+ xpc_disconnect_callout(ch, xpDisconnected);
spin_lock_irqsave(&ch->lock, *irq_flags);
}
@@ -791,7 +791,7 @@
struct xpc_openclose_args *args =
&part->remote_openclose_args[ch_number];
struct xpc_channel *ch = &part->channels[ch_number];
- enum xpc_retval reason;
+ enum xp_retval reason;
spin_lock_irqsave(&ch->lock, irq_flags);
@@ -871,10 +871,10 @@
if (!(ch->flags & XPC_C_DISCONNECTING)) {
reason = args->reason;
- if (reason <= xpcSuccess || reason > xpcUnknownReason)
- reason = xpcUnknownReason;
- else if (reason == xpcUnregistering)
- reason = xpcOtherUnregistering;
+ if (reason <= xpSuccess || reason > xpUnknownReason)
+ reason = xpUnknownReason;
+ else if (reason == xpUnregistering)
+ reason = xpOtherUnregistering;
XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags);
@@ -961,7 +961,7 @@
if (ch->flags & XPC_C_OPENREQUEST) {
if (args->msg_size != ch->msg_size) {
- XPC_DISCONNECT_CHANNEL(ch, xpcUnequalMsgSizes,
+ XPC_DISCONNECT_CHANNEL(ch, xpUnequalMsgSizes,
&irq_flags);
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
@@ -991,7 +991,7 @@
return;
}
if (!(ch->flags & XPC_C_OPENREQUEST)) {
- XPC_DISCONNECT_CHANNEL(ch, xpcOpenCloseError,
+ XPC_DISCONNECT_CHANNEL(ch, xpOpenCloseError,
&irq_flags);
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
@@ -1042,18 +1042,18 @@
/*
* Attempt to establish a channel connection to a remote partition.
*/
-static enum xpc_retval
+static enum xp_retval
xpc_connect_channel(struct xpc_channel *ch)
{
unsigned long irq_flags;
struct xpc_registration *registration = &xpc_registrations[ch->number];
if (mutex_trylock(®istration->mutex) == 0)
- return xpcRetry;
+ return xpRetry;
if (!XPC_CHANNEL_REGISTERED(ch->number)) {
mutex_unlock(®istration->mutex);
- return xpcUnregistered;
+ return xpUnregistered;
}
spin_lock_irqsave(&ch->lock, irq_flags);
@@ -1095,10 +1095,10 @@
* the channel lock as needed.
*/
mutex_unlock(®istration->mutex);
- XPC_DISCONNECT_CHANNEL(ch, xpcUnequalMsgSizes,
+ XPC_DISCONNECT_CHANNEL(ch, xpUnequalMsgSizes,
&irq_flags);
spin_unlock_irqrestore(&ch->lock, irq_flags);
- return xpcUnequalMsgSizes;
+ return xpUnequalMsgSizes;
}
} else {
ch->msg_size = registration->msg_size;
@@ -1120,7 +1120,7 @@
spin_unlock_irqrestore(&ch->lock, irq_flags);
- return xpcSuccess;
+ return xpSuccess;
}
/*
@@ -1203,7 +1203,7 @@
* Notify senders that messages sent have been
* received and delivered by the other side.
*/
- xpc_notify_senders(ch, xpcMsgDelivered,
+ xpc_notify_senders(ch, xpMsgDelivered,
ch->remote_GP.get);
}
@@ -1335,7 +1335,7 @@
* at the same time.
*/
void
-xpc_partition_going_down(struct xpc_partition *part, enum xpc_retval reason)
+xpc_partition_going_down(struct xpc_partition *part, enum xp_retval reason)
{
unsigned long irq_flags;
int ch_number;
@@ -1375,7 +1375,7 @@
void
xpc_teardown_infrastructure(struct xpc_partition *part)
{
- partid_t partid = XPC_PARTID(part);
+ short partid = XPC_PARTID(part);
/*
* We start off by making this partition inaccessible to local
@@ -1428,7 +1428,7 @@
void
xpc_initiate_connect(int ch_number)
{
- partid_t partid;
+ short partid;
struct xpc_partition *part;
struct xpc_channel *ch;
@@ -1456,13 +1456,13 @@
/* let the registerer know that a connection has been established */
if (ch->func != NULL) {
- dev_dbg(xpc_chan, "ch->func() called, reason=xpcConnected, "
+ dev_dbg(xpc_chan, "ch->func() called, reason=xpConnected, "
"partid=%d, channel=%d\n", ch->partid, ch->number);
- ch->func(xpcConnected, ch->partid, ch->number,
+ ch->func(xpConnected, ch->partid, ch->number,
(void *)(u64)ch->local_nentries, ch->key);
- dev_dbg(xpc_chan, "ch->func() returned, reason=xpcConnected, "
+ dev_dbg(xpc_chan, "ch->func() returned, reason=xpConnected, "
"partid=%d, channel=%d\n", ch->partid, ch->number);
}
}
@@ -1484,7 +1484,7 @@
xpc_initiate_disconnect(int ch_number)
{
unsigned long irq_flags;
- partid_t partid;
+ short partid;
struct xpc_partition *part;
struct xpc_channel *ch;
@@ -1503,7 +1503,7 @@
if (!(ch->flags & XPC_C_DISCONNECTED)) {
ch->flags |= XPC_C_WDISCONNECT;
- XPC_DISCONNECT_CHANNEL(ch, xpcUnregistering,
+ XPC_DISCONNECT_CHANNEL(ch, xpUnregistering,
&irq_flags);
}
@@ -1528,7 +1528,7 @@
*/
void
xpc_disconnect_channel(const int line, struct xpc_channel *ch,
- enum xpc_retval reason, unsigned long *irq_flags)
+ enum xp_retval reason, unsigned long *irq_flags)
{
u32 channel_was_connected = (ch->flags & XPC_C_CONNECTED);
@@ -1563,7 +1563,7 @@
} else if ((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) &&
!(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) {
- /* start a kthread that will do the xpcDisconnecting callout */
+ /* start a kthread that will do the xpDisconnecting callout */
xpc_create_kthreads(ch, 1, 1);
}
@@ -1575,7 +1575,7 @@
}
void
-xpc_disconnect_callout(struct xpc_channel *ch, enum xpc_retval reason)
+xpc_disconnect_callout(struct xpc_channel *ch, enum xp_retval reason)
{
/*
* Let the channel's registerer know that the channel is being
@@ -1598,13 +1598,13 @@
* Wait for a message entry to become available for the specified channel,
* but don't wait any longer than 1 jiffy.
*/
-static enum xpc_retval
+static enum xp_retval
xpc_allocate_msg_wait(struct xpc_channel *ch)
{
- enum xpc_retval ret;
+ enum xp_retval ret;
if (ch->flags & XPC_C_DISCONNECTING) {
- DBUG_ON(ch->reason == xpcInterrupted);
+ DBUG_ON(ch->reason == xpInterrupted);
return ch->reason;
}
@@ -1614,11 +1614,11 @@
if (ch->flags & XPC_C_DISCONNECTING) {
ret = ch->reason;
- DBUG_ON(ch->reason == xpcInterrupted);
+ DBUG_ON(ch->reason == xpInterrupted);
} else if (ret == 0) {
- ret = xpcTimeout;
+ ret = xpTimeout;
} else {
- ret = xpcInterrupted;
+ ret = xpInterrupted;
}
return ret;
@@ -1628,12 +1628,12 @@
* Allocate an entry for a message from the message queue associated with the
* specified channel.
*/
-static enum xpc_retval
+static enum xp_retval
xpc_allocate_msg(struct xpc_channel *ch, u32 flags,
struct xpc_msg **address_of_msg)
{
struct xpc_msg *msg;
- enum xpc_retval ret;
+ enum xp_retval ret;
s64 put;
/* this reference will be dropped in xpc_send_msg() */
@@ -1645,7 +1645,7 @@
}
if (!(ch->flags & XPC_C_CONNECTED)) {
xpc_msgqueue_deref(ch);
- return xpcNotConnected;
+ return xpNotConnected;
}
/*
@@ -1653,7 +1653,7 @@
* If none are available, we'll make sure that we grab the latest
* GP values.
*/
- ret = xpcTimeout;
+ ret = xpTimeout;
while (1) {
@@ -1683,16 +1683,16 @@
* that will cause the IPI handler to fetch the latest
* GP values as if an IPI was sent by the other side.
*/
- if (ret == xpcTimeout)
+ if (ret == xpTimeout)
xpc_IPI_send_local_msgrequest(ch);
if (flags & XPC_NOWAIT) {
xpc_msgqueue_deref(ch);
- return xpcNoWait;
+ return xpNoWait;
}
ret = xpc_allocate_msg_wait(ch);
- if (ret != xpcInterrupted && ret != xpcTimeout) {
+ if (ret != xpInterrupted && ret != xpTimeout) {
xpc_msgqueue_deref(ch);
return ret;
}
@@ -1711,7 +1711,7 @@
*address_of_msg = msg;
- return xpcSuccess;
+ return xpSuccess;
}
/*
@@ -1727,11 +1727,11 @@
* payload - address of the allocated payload area pointer (filled in on
* return) in which the user-defined message is constructed.
*/
-enum xpc_retval
-xpc_initiate_allocate(partid_t partid, int ch_number, u32 flags, void **payload)
+enum xp_retval
+xpc_initiate_allocate(short partid, int ch_number, u32 flags, void **payload)
{
struct xpc_partition *part = &xpc_partitions[partid];
- enum xpc_retval ret = xpcUnknownReason;
+ enum xp_retval ret = xpUnknownReason;
struct xpc_msg *msg = NULL;
DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
@@ -1814,11 +1814,11 @@
* local message queue's Put value and sends an IPI to the partition the
* message is being sent to.
*/
-static enum xpc_retval
+static enum xp_retval
xpc_send_msg(struct xpc_channel *ch, struct xpc_msg *msg, u8 notify_type,
xpc_notify_func func, void *key)
{
- enum xpc_retval ret = xpcSuccess;
+ enum xp_retval ret = xpSuccess;
struct xpc_notify *notify = notify;
s64 put, msg_number = msg->number;
@@ -1908,12 +1908,12 @@
* payload - pointer to the payload area allocated via
* xpc_initiate_allocate().
*/
-enum xpc_retval
-xpc_initiate_send(partid_t partid, int ch_number, void *payload)
+enum xp_retval
+xpc_initiate_send(short partid, int ch_number, void *payload)
{
struct xpc_partition *part = &xpc_partitions[partid];
struct xpc_msg *msg = XPC_MSG_ADDRESS(payload);
- enum xpc_retval ret;
+ enum xp_retval ret;
dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg,
partid, ch_number);
@@ -1957,13 +1957,13 @@
* receipt. THIS FUNCTION MUST BE NON-BLOCKING.
* key - user-defined key to be passed to the function when it's called.
*/
-enum xpc_retval
-xpc_initiate_send_notify(partid_t partid, int ch_number, void *payload,
+enum xp_retval
+xpc_initiate_send_notify(short partid, int ch_number, void *payload,
xpc_notify_func func, void *key)
{
struct xpc_partition *part = &xpc_partitions[partid];
struct xpc_msg *msg = XPC_MSG_ADDRESS(payload);
- enum xpc_retval ret;
+ enum xp_retval ret;
dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg,
partid, ch_number);
@@ -1985,7 +1985,7 @@
struct xpc_msg *remote_msg, *msg;
u32 msg_index, nmsgs;
u64 msg_offset;
- enum xpc_retval ret;
+ enum xp_retval ret;
if (mutex_lock_interruptible(&ch->msg_to_pull_mutex) != 0) {
/* we were interrupted by a signal */
@@ -2012,7 +2012,7 @@
ret = xpc_pull_remote_cachelines(part, msg, remote_msg,
nmsgs * ch->msg_size);
- if (ret != xpcSuccess) {
+ if (ret != xpSuccess) {
dev_dbg(xpc_chan, "failed to pull %d msgs starting with"
" msg %ld from partition %d, channel=%d, "
@@ -2112,7 +2112,7 @@
ch->number);
/* deliver the message to its intended recipient */
- ch->func(xpcMsgReceived, ch->partid, ch->number,
+ ch->func(xpMsgReceived, ch->partid, ch->number,
&msg->payload, ch->key);
dev_dbg(xpc_chan, "ch->func() returned, msg=0x%p, "
@@ -2203,7 +2203,7 @@
* xpc_initiate_allocate().
*/
void
-xpc_initiate_received(partid_t partid, int ch_number, void *payload)
+xpc_initiate_received(short partid, int ch_number, void *payload)
{
struct xpc_partition *part = &xpc_partitions[partid];
struct xpc_channel *ch;
diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c
index f673ba9..08256ed 100644
--- a/drivers/misc/sgi-xp/xpc_main.c
+++ b/drivers/misc/sgi-xp/xpc_main.c
@@ -315,13 +315,13 @@
* the XPC per partition variables from the remote partition and waiting for
* the remote partition to pull ours.
*/
-static enum xpc_retval
+static enum xp_retval
xpc_make_first_contact(struct xpc_partition *part)
{
- enum xpc_retval ret;
+ enum xp_retval ret;
- while ((ret = xpc_pull_remote_vars_part(part)) != xpcSuccess) {
- if (ret != xpcRetry) {
+ while ((ret = xpc_pull_remote_vars_part(part)) != xpSuccess) {
+ if (ret != xpRetry) {
XPC_DEACTIVATE_PARTITION(part, ret);
return ret;
}
@@ -406,7 +406,7 @@
dev_dbg(xpc_chan, "activating partition %d\n", XPC_PARTID(part));
- if (xpc_setup_infrastructure(part) != xpcSuccess)
+ if (xpc_setup_infrastructure(part) != xpSuccess)
return;
/*
@@ -418,7 +418,7 @@
(void)xpc_part_ref(part); /* this will always succeed */
- if (xpc_make_first_contact(part) == xpcSuccess)
+ if (xpc_make_first_contact(part) == xpSuccess)
xpc_channel_mgr(part);
xpc_part_deref(part);
@@ -429,7 +429,7 @@
static int
xpc_activating(void *__partid)
{
- partid_t partid = (u64)__partid;
+ short partid = (u64)__partid;
struct xpc_partition *part = &xpc_partitions[partid];
unsigned long irq_flags;
@@ -470,7 +470,7 @@
spin_lock_irqsave(&part->act_lock, irq_flags);
part->act_state = XPC_P_INACTIVE;
- XPC_SET_REASON(part, xpcPhysAddrRegFailed, __LINE__);
+ XPC_SET_REASON(part, xpPhysAddrRegFailed, __LINE__);
spin_unlock_irqrestore(&part->act_lock, irq_flags);
part->remote_rp_pa = 0;
return 0;
@@ -488,7 +488,7 @@
xpc_disallow_hb(partid, xpc_vars);
xpc_mark_partition_inactive(part);
- if (part->reason == xpcReactivating) {
+ if (part->reason == xpReactivating) {
/* interrupting ourselves results in activating partition */
xpc_IPI_send_reactivate(part);
}
@@ -499,7 +499,7 @@
void
xpc_activate_partition(struct xpc_partition *part)
{
- partid_t partid = XPC_PARTID(part);
+ short partid = XPC_PARTID(part);
unsigned long irq_flags;
struct task_struct *kthread;
@@ -508,7 +508,7 @@
DBUG_ON(part->act_state != XPC_P_INACTIVE);
part->act_state = XPC_P_ACTIVATION_REQ;
- XPC_SET_REASON(part, xpcCloneKThread, __LINE__);
+ XPC_SET_REASON(part, xpCloneKThread, __LINE__);
spin_unlock_irqrestore(&part->act_lock, irq_flags);
@@ -517,7 +517,7 @@
if (IS_ERR(kthread)) {
spin_lock_irqsave(&part->act_lock, irq_flags);
part->act_state = XPC_P_INACTIVE;
- XPC_SET_REASON(part, xpcCloneKThreadFailed, __LINE__);
+ XPC_SET_REASON(part, xpCloneKThreadFailed, __LINE__);
spin_unlock_irqrestore(&part->act_lock, irq_flags);
}
}
@@ -541,7 +541,7 @@
irqreturn_t
xpc_notify_IRQ_handler(int irq, void *dev_id)
{
- partid_t partid = (partid_t) (u64)dev_id;
+ short partid = (short)(u64)dev_id;
struct xpc_partition *part = &xpc_partitions[partid];
DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
@@ -643,7 +643,7 @@
static int
xpc_kthread_start(void *args)
{
- partid_t partid = XPC_UNPACK_ARG1(args);
+ short partid = XPC_UNPACK_ARG1(args);
u16 ch_number = XPC_UNPACK_ARG2(args);
struct xpc_partition *part = &xpc_partitions[partid];
struct xpc_channel *ch;
@@ -696,7 +696,7 @@
ch->flags |= XPC_C_DISCONNECTINGCALLOUT;
spin_unlock_irqrestore(&ch->lock, irq_flags);
- xpc_disconnect_callout(ch, xpcDisconnecting);
+ xpc_disconnect_callout(ch, xpDisconnecting);
spin_lock_irqsave(&ch->lock, irq_flags);
ch->flags |= XPC_C_DISCONNECTINGCALLOUT_MADE;
@@ -776,7 +776,7 @@
* then we'll deadlock if all other kthreads assigned
* to this channel are blocked in the channel's
* registerer, because the only thing that will unblock
- * them is the xpcDisconnecting callout that this
+ * them is the xpDisconnecting callout that this
* failed kthread_run() would have made.
*/
@@ -796,7 +796,7 @@
* to function.
*/
spin_lock_irqsave(&ch->lock, irq_flags);
- XPC_DISCONNECT_CHANNEL(ch, xpcLackOfResources,
+ XPC_DISCONNECT_CHANNEL(ch, xpLackOfResources,
&irq_flags);
spin_unlock_irqrestore(&ch->lock, irq_flags);
}
@@ -809,7 +809,7 @@
xpc_disconnect_wait(int ch_number)
{
unsigned long irq_flags;
- partid_t partid;
+ short partid;
struct xpc_partition *part;
struct xpc_channel *ch;
int wakeup_channel_mgr;
@@ -857,9 +857,9 @@
}
static void
-xpc_do_exit(enum xpc_retval reason)
+xpc_do_exit(enum xp_retval reason)
{
- partid_t partid;
+ short partid;
int active_part_count, printed_waiting_msg = 0;
struct xpc_partition *part;
unsigned long printmsg_time, disengage_request_timeout = 0;
@@ -955,7 +955,7 @@
del_timer_sync(&xpc_hb_timer);
DBUG_ON(xpc_vars->heartbeating_to_mask != 0);
- if (reason == xpcUnloading) {
+ if (reason == xpUnloading) {
/* take ourselves off of the reboot_notifier_list */
(void)unregister_reboot_notifier(&xpc_reboot_notifier);
@@ -981,20 +981,20 @@
static int
xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused)
{
- enum xpc_retval reason;
+ enum xp_retval reason;
switch (event) {
case SYS_RESTART:
- reason = xpcSystemReboot;
+ reason = xpSystemReboot;
break;
case SYS_HALT:
- reason = xpcSystemHalt;
+ reason = xpSystemHalt;
break;
case SYS_POWER_OFF:
- reason = xpcSystemPoweroff;
+ reason = xpSystemPoweroff;
break;
default:
- reason = xpcSystemGoingDown;
+ reason = xpSystemGoingDown;
}
xpc_do_exit(reason);
@@ -1008,7 +1008,7 @@
xpc_die_disengage(void)
{
struct xpc_partition *part;
- partid_t partid;
+ short partid;
unsigned long engaged;
long time, printmsg_time, disengage_request_timeout;
@@ -1124,7 +1124,7 @@
xpc_init(void)
{
int ret;
- partid_t partid;
+ short partid;
struct xpc_partition *part;
struct task_struct *kthread;
size_t buf_size;
@@ -1279,7 +1279,7 @@
/* mark this new thread as a non-starter */
complete(&xpc_discovery_exited);
- xpc_do_exit(xpcUnloading);
+ xpc_do_exit(xpUnloading);
return -EBUSY;
}
@@ -1297,7 +1297,7 @@
void __exit
xpc_exit(void)
{
- xpc_do_exit(xpcUnloading);
+ xpc_do_exit(xpUnloading);
}
module_exit(xpc_exit);
diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c
index acd3fd4..7dd4b58 100644
--- a/drivers/misc/sgi-xp/xpc_partition.c
+++ b/drivers/misc/sgi-xp/xpc_partition.c
@@ -403,7 +403,7 @@
{
struct xpc_vars *remote_vars;
struct xpc_partition *part;
- partid_t partid;
+ short partid;
bte_result_t bres;
remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer;
@@ -444,7 +444,7 @@
(remote_vars->heartbeat_offline == 0)) ||
!xpc_hb_allowed(sn_partition_id, remote_vars)) {
- XPC_DEACTIVATE_PARTITION(part, xpcNoHeartbeat);
+ XPC_DEACTIVATE_PARTITION(part, xpNoHeartbeat);
continue;
}
@@ -459,7 +459,7 @@
* is large enough to contain a copy of their reserved page header and
* part_nasids mask.
*/
-static enum xpc_retval
+static enum xp_retval
xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
struct xpc_rsvd_page *remote_rp, u64 *remote_rp_pa)
{
@@ -469,7 +469,7 @@
*remote_rp_pa = xpc_get_rsvd_page_pa(nasid);
if (*remote_rp_pa == 0)
- return xpcNoRsvdPageAddr;
+ return xpNoRsvdPageAddr;
/* pull over the reserved page header and part_nasids mask */
bres = xp_bte_copy(*remote_rp_pa, (u64)remote_rp,
@@ -489,18 +489,18 @@
if (remote_rp->partid < 1 ||
remote_rp->partid > (XP_MAX_PARTITIONS - 1)) {
- return xpcInvalidPartid;
+ return xpInvalidPartid;
}
if (remote_rp->partid == sn_partition_id)
- return xpcLocalPartid;
+ return xpLocalPartid;
if (XPC_VERSION_MAJOR(remote_rp->version) !=
XPC_VERSION_MAJOR(XPC_RP_VERSION)) {
- return xpcBadVersion;
+ return xpBadVersion;
}
- return xpcSuccess;
+ return xpSuccess;
}
/*
@@ -509,13 +509,13 @@
* remote_vars points to a buffer that is cacheline aligned for BTE copies and
* assumed to be of size XPC_RP_VARS_SIZE.
*/
-static enum xpc_retval
+static enum xp_retval
xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
{
int bres;
if (remote_vars_pa == 0)
- return xpcVarsNotSet;
+ return xpVarsNotSet;
/* pull over the cross partition variables */
bres = xp_bte_copy(remote_vars_pa, (u64)remote_vars, XPC_RP_VARS_SIZE,
@@ -525,10 +525,10 @@
if (XPC_VERSION_MAJOR(remote_vars->version) !=
XPC_VERSION_MAJOR(XPC_V_VERSION)) {
- return xpcBadVersion;
+ return xpBadVersion;
}
- return xpcSuccess;
+ return xpSuccess;
}
/*
@@ -604,16 +604,16 @@
int reactivate = 0;
int stamp_diff;
struct timespec remote_rp_stamp = { 0, 0 };
- partid_t partid;
+ short partid;
struct xpc_partition *part;
- enum xpc_retval ret;
+ enum xp_retval ret;
/* pull over the reserved page structure */
remote_rp = (struct xpc_rsvd_page *)xpc_remote_copy_buffer;
ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa);
- if (ret != xpcSuccess) {
+ if (ret != xpSuccess) {
dev_warn(xpc_part, "unable to get reserved page from nasid %d, "
"which sent interrupt, reason=%d\n", nasid, ret);
return;
@@ -632,7 +632,7 @@
remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer;
ret = xpc_get_remote_vars(remote_vars_pa, remote_vars);
- if (ret != xpcSuccess) {
+ if (ret != xpSuccess) {
dev_warn(xpc_part, "unable to get XPC variables from nasid %d, "
"which sent interrupt, reason=%d\n", nasid, ret);
@@ -699,7 +699,7 @@
&remote_rp_stamp, remote_rp_pa,
remote_vars_pa, remote_vars);
part->reactivate_nasid = nasid;
- XPC_DEACTIVATE_PARTITION(part, xpcReactivating);
+ XPC_DEACTIVATE_PARTITION(part, xpReactivating);
return;
}
@@ -754,11 +754,11 @@
if (reactivate) {
part->reactivate_nasid = nasid;
- XPC_DEACTIVATE_PARTITION(part, xpcReactivating);
+ XPC_DEACTIVATE_PARTITION(part, xpReactivating);
} else if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version) &&
xpc_partition_disengage_requested(1UL << partid)) {
- XPC_DEACTIVATE_PARTITION(part, xpcOtherGoingDown);
+ XPC_DEACTIVATE_PARTITION(part, xpOtherGoingDown);
}
}
@@ -825,7 +825,7 @@
int
xpc_partition_disengaged(struct xpc_partition *part)
{
- partid_t partid = XPC_PARTID(part);
+ short partid = XPC_PARTID(part);
int disengaged;
disengaged = (xpc_partition_engaged(1UL << partid) == 0);
@@ -870,20 +870,20 @@
/*
* Mark specified partition as active.
*/
-enum xpc_retval
+enum xp_retval
xpc_mark_partition_active(struct xpc_partition *part)
{
unsigned long irq_flags;
- enum xpc_retval ret;
+ enum xp_retval ret;
dev_dbg(xpc_part, "setting partition %d to ACTIVE\n", XPC_PARTID(part));
spin_lock_irqsave(&part->act_lock, irq_flags);
if (part->act_state == XPC_P_ACTIVATING) {
part->act_state = XPC_P_ACTIVE;
- ret = xpcSuccess;
+ ret = xpSuccess;
} else {
- DBUG_ON(part->reason == xpcSuccess);
+ DBUG_ON(part->reason == xpSuccess);
ret = part->reason;
}
spin_unlock_irqrestore(&part->act_lock, irq_flags);
@@ -896,7 +896,7 @@
*/
void
xpc_deactivate_partition(const int line, struct xpc_partition *part,
- enum xpc_retval reason)
+ enum xp_retval reason)
{
unsigned long irq_flags;
@@ -905,15 +905,15 @@
if (part->act_state == XPC_P_INACTIVE) {
XPC_SET_REASON(part, reason, line);
spin_unlock_irqrestore(&part->act_lock, irq_flags);
- if (reason == xpcReactivating) {
+ if (reason == xpReactivating) {
/* we interrupt ourselves to reactivate partition */
xpc_IPI_send_reactivate(part);
}
return;
}
if (part->act_state == XPC_P_DEACTIVATING) {
- if ((part->reason == xpcUnloading && reason != xpcUnloading) ||
- reason == xpcReactivating) {
+ if ((part->reason == xpUnloading && reason != xpUnloading) ||
+ reason == xpReactivating) {
XPC_SET_REASON(part, reason, line);
}
spin_unlock_irqrestore(&part->act_lock, irq_flags);
@@ -982,10 +982,10 @@
int max_regions;
int nasid;
struct xpc_rsvd_page *rp;
- partid_t partid;
+ short partid;
struct xpc_partition *part;
u64 *discovered_nasids;
- enum xpc_retval ret;
+ enum xp_retval ret;
remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RP_HEADER_SIZE +
xp_nasid_mask_bytes,
@@ -1063,12 +1063,12 @@
ret = xpc_get_remote_rp(nasid, discovered_nasids,
remote_rp, &remote_rp_pa);
- if (ret != xpcSuccess) {
+ if (ret != xpSuccess) {
dev_dbg(xpc_part, "unable to get reserved page "
"from nasid %d, reason=%d\n", nasid,
ret);
- if (ret == xpcLocalPartid)
+ if (ret == xpLocalPartid)
break;
continue;
@@ -1082,7 +1082,7 @@
/* pull over the cross partition variables */
ret = xpc_get_remote_vars(remote_vars_pa, remote_vars);
- if (ret != xpcSuccess) {
+ if (ret != xpSuccess) {
dev_dbg(xpc_part, "unable to get XPC variables "
"from nasid %d, reason=%d\n", nasid,
ret);
@@ -1116,7 +1116,7 @@
"register xp_addr region 0x%016lx\n",
partid, remote_vars->amos_page_pa);
- XPC_SET_REASON(part, xpcPhysAddrRegFailed,
+ XPC_SET_REASON(part, xpPhysAddrRegFailed,
__LINE__);
break;
}
@@ -1151,8 +1151,8 @@
* Given a partid, get the nasids owned by that partition from the
* remote partition's reserved page.
*/
-enum xpc_retval
-xpc_initiate_partid_to_nasids(partid_t partid, void *nasid_mask)
+enum xp_retval
+xpc_initiate_partid_to_nasids(short partid, void *nasid_mask)
{
struct xpc_partition *part;
u64 part_nasid_pa;
@@ -1160,7 +1160,7 @@
part = &xpc_partitions[partid];
if (part->remote_rp_pa == 0)
- return xpcPartitionDown;
+ return xpPartitionDown;
memset(nasid_mask, 0, XP_NASID_MASK_BYTES);
diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c
index a9543c6..822dc8e 100644
--- a/drivers/misc/sgi-xp/xpnet.c
+++ b/drivers/misc/sgi-xp/xpnet.c
@@ -166,7 +166,7 @@
* Packet was recevied by XPC and forwarded to us.
*/
static void
-xpnet_receive(partid_t partid, int channel, struct xpnet_message *msg)
+xpnet_receive(short partid, int channel, struct xpnet_message *msg)
{
struct sk_buff *skb;
bte_result_t bret;
@@ -282,7 +282,7 @@
* state or message reception on a connection.
*/
static void
-xpnet_connection_activity(enum xpc_retval reason, partid_t partid, int channel,
+xpnet_connection_activity(enum xp_retval reason, short partid, int channel,
void *data, void *key)
{
long bp;
@@ -291,13 +291,13 @@
DBUG_ON(channel != XPC_NET_CHANNEL);
switch (reason) {
- case xpcMsgReceived: /* message received */
+ case xpMsgReceived: /* message received */
DBUG_ON(data == NULL);
xpnet_receive(partid, channel, (struct xpnet_message *)data);
break;
- case xpcConnected: /* connection completed to a partition */
+ case xpConnected: /* connection completed to a partition */
spin_lock_bh(&xpnet_broadcast_lock);
xpnet_broadcast_partitions |= 1UL << (partid - 1);
bp = xpnet_broadcast_partitions;
@@ -330,7 +330,7 @@
static int
xpnet_dev_open(struct net_device *dev)
{
- enum xpc_retval ret;
+ enum xp_retval ret;
dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %ld, "
"%ld)\n", XPC_NET_CHANNEL, xpnet_connection_activity,
@@ -340,7 +340,7 @@
ret = xpc_connect(XPC_NET_CHANNEL, xpnet_connection_activity, NULL,
XPNET_MSG_SIZE, XPNET_MSG_NENTRIES,
XPNET_MAX_KTHREADS, XPNET_MAX_IDLE_KTHREADS);
- if (ret != xpcSuccess) {
+ if (ret != xpSuccess) {
dev_err(xpnet, "ifconfig up of %s failed on XPC connect, "
"ret=%d\n", dev->name, ret);
@@ -407,7 +407,7 @@
* release the skb and then release our pending message structure.
*/
static void
-xpnet_send_completed(enum xpc_retval reason, partid_t partid, int channel,
+xpnet_send_completed(enum xp_retval reason, short partid, int channel,
void *__qm)
{
struct xpnet_pending_msg *queued_msg = (struct xpnet_pending_msg *)__qm;
@@ -439,12 +439,12 @@
xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct xpnet_pending_msg *queued_msg;
- enum xpc_retval ret;
+ enum xp_retval ret;
struct xpnet_message *msg;
u64 start_addr, end_addr;
long dp;
u8 second_mac_octet;
- partid_t dest_partid;
+ short dest_partid;
struct xpnet_dev_private *priv;
u16 embedded_bytes;
@@ -528,7 +528,7 @@
ret = xpc_allocate(dest_partid, XPC_NET_CHANNEL,
XPC_NOWAIT, (void **)&msg);
- if (unlikely(ret != xpcSuccess))
+ if (unlikely(ret != xpSuccess))
continue;
msg->embedded_bytes = embedded_bytes;
@@ -557,7 +557,7 @@
ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, msg,
xpnet_send_completed, queued_msg);
- if (unlikely(ret != xpcSuccess)) {
+ if (unlikely(ret != xpSuccess)) {
atomic_dec(&queued_msg->use_count);
continue;
}
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 626ac083..da5feca 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -425,7 +425,7 @@
host->cclk = host->mclk;
} else {
clk = host->mclk / (2 * ios->clock) - 1;
- if (clk > 256)
+ if (clk >= 256)
clk = 255;
host->cclk = host->mclk / (2 * (clk + 1));
}
@@ -512,6 +512,18 @@
host->plat = plat;
host->mclk = clk_get_rate(host->clk);
+ /*
+ * According to the spec, mclk is max 100 MHz,
+ * so we try to adjust the clock down to this,
+ * (if possible).
+ */
+ if (host->mclk > 100000000) {
+ ret = clk_set_rate(host->clk, 100000000);
+ if (ret < 0)
+ goto clk_disable;
+ host->mclk = clk_get_rate(host->clk);
+ DBG(host, "eventual mclk rate: %u Hz\n", host->mclk);
+ }
host->mmc = mmc;
host->base = ioremap(dev->res.start, SZ_4K);
if (!host->base) {
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 7fb02e1..299118d 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -187,7 +187,7 @@
struct mmc_request *mrq; /* Current request */
struct mmc_command *cmd; /* Current command */
struct mmc_data *data; /* Current data request */
- int data_early:1; /* Data finished before cmd */
+ unsigned int data_early:1; /* Data finished before cmd */
struct scatterlist *cur_sg; /* We're working on this */
int num_sg; /* Entries left */
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index e812df6..fcd1aec 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -82,9 +82,8 @@
static int cfi_intelext_partition_fixup(struct mtd_info *, struct cfi_private **);
static int cfi_intelext_point (struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char **mtdbuf);
-static void cfi_intelext_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from,
- size_t len);
+ size_t *retlen, void **virt, resource_size_t *phys);
+static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len);
static int chip_ready (struct map_info *map, struct flchip *chip, unsigned long adr, int mode);
static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr, int mode);
@@ -1240,7 +1239,8 @@
return ret;
}
-static int cfi_intelext_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf)
+static int cfi_intelext_point(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, void **virt, resource_size_t *phys)
{
struct map_info *map = mtd->priv;
struct cfi_private *cfi = map->fldrv_priv;
@@ -1257,8 +1257,10 @@
chipnum = (from >> cfi->chipshift);
ofs = from - (chipnum << cfi->chipshift);
- *mtdbuf = (void *)map->virt + cfi->chips[chipnum].start + ofs;
+ *virt = map->virt + cfi->chips[chipnum].start + ofs;
*retlen = 0;
+ if (phys)
+ *phys = map->phys + cfi->chips[chipnum].start + ofs;
while (len) {
unsigned long thislen;
@@ -1291,7 +1293,7 @@
return 0;
}
-static void cfi_intelext_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from, size_t len)
+static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
{
struct map_info *map = mtd->priv;
struct cfi_private *cfi = map->fldrv_priv;
diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c
index bf485ff..0399be1 100644
--- a/drivers/mtd/devices/mtdram.c
+++ b/drivers/mtd/devices/mtdram.c
@@ -48,18 +48,21 @@
}
static int ram_point(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char **mtdbuf)
+ size_t *retlen, void **virt, resource_size_t *phys)
{
if (from + len > mtd->size)
return -EINVAL;
- *mtdbuf = mtd->priv + from;
+ /* can we return a physical address with this driver? */
+ if (phys)
+ return -EINVAL;
+
+ *virt = mtd->priv + from;
*retlen = len;
return 0;
}
-static void ram_unpoint(struct mtd_info *mtd, u_char * addr, loff_t from,
- size_t len)
+static void ram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
{
}
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
index 5f96018..c7987b1 100644
--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -57,20 +57,21 @@
}
static int phram_point(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char **mtdbuf)
+ size_t *retlen, void **virt, resource_size_t *phys)
{
- u_char *start = mtd->priv;
-
if (from + len > mtd->size)
return -EINVAL;
- *mtdbuf = start + from;
+ /* can we return a physical address with this driver? */
+ if (phys)
+ return -EINVAL;
+
+ *virt = mtd->priv + from;
*retlen = len;
return 0;
}
-static void phram_unpoint(struct mtd_info *mtd, u_char *addr, loff_t from,
- size_t len)
+static void phram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
{
}
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index 7060a08..bc99817 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -134,7 +134,8 @@
eoff_lo = end & (priv->asize - 1);
soff_lo = instr->addr & (priv->asize - 1);
- pmc551_point(mtd, instr->addr, instr->len, &retlen, &ptr);
+ pmc551_point(mtd, instr->addr, instr->len, &retlen,
+ (void **)&ptr, NULL);
if (soff_hi == eoff_hi || mtd->size == priv->asize) {
/* The whole thing fits within one access, so just one shot
@@ -154,7 +155,8 @@
}
soff_hi += priv->asize;
pmc551_point(mtd, (priv->base_map0 | soff_hi),
- priv->asize, &retlen, &ptr);
+ priv->asize, &retlen,
+ (void **)&ptr, NULL);
}
memset(ptr, 0xff, eoff_lo);
}
@@ -170,7 +172,7 @@
}
static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len,
- size_t * retlen, u_char ** mtdbuf)
+ size_t *retlen, void **virt, resource_size_t *phys)
{
struct mypriv *priv = mtd->priv;
u32 soff_hi;
@@ -188,6 +190,10 @@
return -EINVAL;
}
+ /* can we return a physical address with this driver? */
+ if (phys)
+ return -EINVAL;
+
soff_hi = from & ~(priv->asize - 1);
soff_lo = from & (priv->asize - 1);
@@ -198,13 +204,12 @@
priv->curr_map0 = soff_hi;
}
- *mtdbuf = priv->start + soff_lo;
+ *virt = priv->start + soff_lo;
*retlen = len;
return 0;
}
-static void pmc551_unpoint(struct mtd_info *mtd, u_char * addr, loff_t from,
- size_t len)
+static void pmc551_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
{
#ifdef CONFIG_MTD_PMC551_DEBUG
printk(KERN_DEBUG "pmc551_unpoint()\n");
@@ -242,7 +247,7 @@
soff_lo = from & (priv->asize - 1);
eoff_lo = end & (priv->asize - 1);
- pmc551_point(mtd, from, len, retlen, &ptr);
+ pmc551_point(mtd, from, len, retlen, (void **)&ptr, NULL);
if (soff_hi == eoff_hi) {
/* The whole thing fits within one access, so just one shot
@@ -263,7 +268,8 @@
goto out;
}
soff_hi += priv->asize;
- pmc551_point(mtd, soff_hi, priv->asize, retlen, &ptr);
+ pmc551_point(mtd, soff_hi, priv->asize, retlen,
+ (void **)&ptr, NULL);
}
memcpy(copyto, ptr, eoff_lo);
copyto += eoff_lo;
@@ -308,7 +314,7 @@
soff_lo = to & (priv->asize - 1);
eoff_lo = end & (priv->asize - 1);
- pmc551_point(mtd, to, len, retlen, &ptr);
+ pmc551_point(mtd, to, len, retlen, (void **)&ptr, NULL);
if (soff_hi == eoff_hi) {
/* The whole thing fits within one access, so just one shot
@@ -329,7 +335,8 @@
goto out;
}
soff_hi += priv->asize;
- pmc551_point(mtd, soff_hi, priv->asize, retlen, &ptr);
+ pmc551_point(mtd, soff_hi, priv->asize, retlen,
+ (void **)&ptr, NULL);
}
memcpy(ptr, copyfrom, eoff_lo);
copyfrom += eoff_lo;
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
index d293add..cb86db7 100644
--- a/drivers/mtd/devices/slram.c
+++ b/drivers/mtd/devices/slram.c
@@ -76,8 +76,9 @@
static slram_mtd_list_t *slram_mtdlist = NULL;
static int slram_erase(struct mtd_info *, struct erase_info *);
-static int slram_point(struct mtd_info *, loff_t, size_t, size_t *, u_char **);
-static void slram_unpoint(struct mtd_info *, u_char *, loff_t, size_t);
+static int slram_point(struct mtd_info *, loff_t, size_t, size_t *, void **,
+ resource_size_t *);
+static void slram_unpoint(struct mtd_info *, loff_t, size_t);
static int slram_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int slram_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -104,19 +105,23 @@
}
static int slram_point(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char **mtdbuf)
+ size_t *retlen, void **virt, resource_size_t *phys)
{
slram_priv_t *priv = mtd->priv;
+ /* can we return a physical address with this driver? */
+ if (phys)
+ return -EINVAL;
+
if (from + len > mtd->size)
return -EINVAL;
- *mtdbuf = priv->start + from;
+ *virt = priv->start + from;
*retlen = len;
return(0);
}
-static void slram_unpoint(struct mtd_info *mtd, u_char *addr, loff_t from, size_t len)
+static void slram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
{
}
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 1bd69aa..17bc87a 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -374,7 +374,7 @@
config MTD_SOLUTIONENGINE
tristate "CFI Flash device mapped on Hitachi SolutionEngine"
- depends on SUPERH && MTD_CFI && MTD_REDBOOT_PARTS
+ depends on SUPERH && SOLUTION_ENGINE && MTD_CFI && MTD_REDBOOT_PARTS
help
This enables access to the flash chips on the Hitachi SolutionEngine and
similar boards. Say 'Y' if you are building a kernel for such a board.
@@ -480,13 +480,6 @@
This enables access to the flash chips on the Hynix evaluation boards.
If you have such a board, say 'Y'.
-config MTD_MPC1211
- tristate "CFI Flash device mapped on Interface MPC-1211"
- depends on SH_MPC1211 && MTD_CFI
- help
- This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02).
- If you have such a board, say 'Y'.
-
config MTD_OMAP_NOR
tristate "TI OMAP board mappings"
depends on MTD_CFI && ARCH_OMAP
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index a9cbe80..957fb5f 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -58,7 +58,6 @@
obj-$(CONFIG_MTD_H720X) += h720x-flash.o
obj-$(CONFIG_MTD_SBC8240) += sbc8240.o
obj-$(CONFIG_MTD_NOR_TOTO) += omap-toto-flash.o
-obj-$(CONFIG_MTD_MPC1211) += mpc1211.o
obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o
obj-$(CONFIG_MTD_IXP2000) += ixp2000.o
obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o
diff --git a/drivers/mtd/maps/mpc1211.c b/drivers/mtd/maps/mpc1211.c
deleted file mode 100644
index 45a00fa..0000000
--- a/drivers/mtd/maps/mpc1211.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Flash on MPC-1211
- *
- * $Id: mpc1211.c,v 1.4 2004/09/16 23:27:13 gleixner Exp $
- *
- * (C) 2002 Interface, Saito.K & Jeanne
- *
- * GPL'd
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-static struct mtd_info *flash_mtd;
-static struct mtd_partition *parsed_parts;
-
-struct map_info mpc1211_flash_map = {
- .name = "MPC-1211 FLASH",
- .size = 0x80000,
- .bankwidth = 1,
-};
-
-static struct mtd_partition mpc1211_partitions[] = {
- {
- .name = "IPL & ETH-BOOT",
- .offset = 0x00000000,
- .size = 0x10000,
- },
- {
- .name = "Flash FS",
- .offset = 0x00010000,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static int __init init_mpc1211_maps(void)
-{
- int nr_parts;
-
- mpc1211_flash_map.phys = 0;
- mpc1211_flash_map.virt = (void __iomem *)P2SEGADDR(0);
-
- simple_map_init(&mpc1211_flash_map);
-
- printk(KERN_NOTICE "Probing for flash chips at 0x00000000:\n");
- flash_mtd = do_map_probe("jedec_probe", &mpc1211_flash_map);
- if (!flash_mtd) {
- printk(KERN_NOTICE "Flash chips not detected at either possible location.\n");
- return -ENXIO;
- }
- printk(KERN_NOTICE "MPC-1211: Flash at 0x%08lx\n", mpc1211_flash_map.virt & 0x1fffffff);
- flash_mtd->module = THIS_MODULE;
-
- parsed_parts = mpc1211_partitions;
- nr_parts = ARRAY_SIZE(mpc1211_partitions);
-
- add_mtd_partitions(flash_mtd, parsed_parts, nr_parts);
- return 0;
-}
-
-static void __exit cleanup_mpc1211_maps(void)
-{
- if (parsed_parts)
- del_mtd_partitions(flash_mtd);
- else
- del_mtd_device(flash_mtd);
- map_destroy(flash_mtd);
-}
-
-module_init(init_mpc1211_maps);
-module_exit(cleanup_mpc1211_maps);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Saito.K & Jeanne <ksaito@interface.co.jp>");
-MODULE_DESCRIPTION("MTD map driver for MPC-1211 boards. Interface");
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index 14ffb1a93..c42f4b8 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -40,10 +40,12 @@
/****************************************************************************/
int uclinux_point(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char **mtdbuf)
+ size_t *retlen, void **virt, resource_size_t *phys)
{
struct map_info *map = mtd->priv;
- *mtdbuf = (u_char *) (map->virt + ((int) from));
+ *virt = map->virt + from;
+ if (phys)
+ *phys = map->phys + from;
*retlen = len;
return(0);
}
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index c66902d..07c7011 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -68,7 +68,7 @@
}
static int part_point (struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char **buf)
+ size_t *retlen, void **virt, resource_size_t *phys)
{
struct mtd_part *part = PART(mtd);
if (from >= mtd->size)
@@ -76,14 +76,14 @@
else if (from + len > mtd->size)
len = mtd->size - from;
return part->master->point (part->master, from + part->offset,
- len, retlen, buf);
+ len, retlen, virt, phys);
}
-static void part_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from, size_t len)
+static void part_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
{
struct mtd_part *part = PART(mtd);
- part->master->unpoint (part->master, addr, from + part->offset, len);
+ part->master->unpoint(part->master, from + part->offset, len);
}
static int part_read_oob(struct mtd_info *mtd, loff_t from,
diff --git a/drivers/mtd/nand/at91_nand.c b/drivers/mtd/nand/at91_nand.c
index 414ceae..0adb287 100644
--- a/drivers/mtd/nand/at91_nand.c
+++ b/drivers/mtd/nand/at91_nand.c
@@ -94,6 +94,24 @@
};
/*
+ * Enable NAND.
+ */
+static void at91_nand_enable(struct at91_nand_host *host)
+{
+ if (host->board->enable_pin)
+ at91_set_gpio_value(host->board->enable_pin, 0);
+}
+
+/*
+ * Disable NAND.
+ */
+static void at91_nand_disable(struct at91_nand_host *host)
+{
+ if (host->board->enable_pin)
+ at91_set_gpio_value(host->board->enable_pin, 1);
+}
+
+/*
* Hardware specific access to control-lines
*/
static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
@@ -101,11 +119,11 @@
struct nand_chip *nand_chip = mtd->priv;
struct at91_nand_host *host = nand_chip->priv;
- if (host->board->enable_pin && (ctrl & NAND_CTRL_CHANGE)) {
+ if (ctrl & NAND_CTRL_CHANGE) {
if (ctrl & NAND_NCE)
- at91_set_gpio_value(host->board->enable_pin, 0);
+ at91_nand_enable(host);
else
- at91_set_gpio_value(host->board->enable_pin, 1);
+ at91_nand_disable(host);
}
if (cmd == NAND_CMD_NONE)
return;
@@ -128,24 +146,6 @@
}
/*
- * Enable NAND.
- */
-static void at91_nand_enable(struct at91_nand_host *host)
-{
- if (host->board->enable_pin)
- at91_set_gpio_value(host->board->enable_pin, 0);
-}
-
-/*
- * Disable NAND.
- */
-static void at91_nand_disable(struct at91_nand_host *host)
-{
- if (host->board->enable_pin)
- at91_set_gpio_value(host->board->enable_pin, 1);
-}
-
-/*
* write oob for small pages
*/
static int at91_nand_write_oob_512(struct mtd_info *mtd,
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index d7a3ea8..32a4f17d 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -67,6 +67,10 @@
#define FEC_MAX_PORTS 1
#endif
+#if defined(CONFIG_FADS) || defined(CONFIG_RPXCLASSIC) || defined(CONFIG_M5272)
+#define HAVE_mii_link_interrupt
+#endif
+
/*
* Define the fixed address of the FEC hardware.
*/
@@ -205,7 +209,10 @@
cbd_t *cur_rx, *cur_tx; /* The next free ring entry */
cbd_t *dirty_tx; /* The ring entries to be free()ed. */
uint tx_full;
- spinlock_t lock;
+ /* hold while accessing the HW like ringbuffer for tx/rx but not MAC */
+ spinlock_t hw_lock;
+ /* hold while accessing the mii_list_t() elements */
+ spinlock_t mii_lock;
uint phy_id;
uint phy_id_done;
@@ -309,6 +316,7 @@
volatile fec_t *fecp;
volatile cbd_t *bdp;
unsigned short status;
+ unsigned long flags;
fep = netdev_priv(dev);
fecp = (volatile fec_t*)dev->base_addr;
@@ -318,6 +326,7 @@
return 1;
}
+ spin_lock_irqsave(&fep->hw_lock, flags);
/* Fill in a Tx ring entry */
bdp = fep->cur_tx;
@@ -328,6 +337,7 @@
* This should not happen, since dev->tbusy should be set.
*/
printk("%s: tx queue full!.\n", dev->name);
+ spin_unlock_irqrestore(&fep->hw_lock, flags);
return 1;
}
#endif
@@ -366,8 +376,6 @@
flush_dcache_range((unsigned long)skb->data,
(unsigned long)skb->data + skb->len);
- spin_lock_irq(&fep->lock);
-
/* Send it on its way. Tell FEC it's ready, interrupt when done,
* it's the last BD of the frame, and to put the CRC on the end.
*/
@@ -396,7 +404,7 @@
fep->cur_tx = (cbd_t *)bdp;
- spin_unlock_irq(&fep->lock);
+ spin_unlock_irqrestore(&fep->hw_lock, flags);
return 0;
}
@@ -454,19 +462,20 @@
struct net_device *dev = dev_id;
volatile fec_t *fecp;
uint int_events;
- int handled = 0;
+ irqreturn_t ret = IRQ_NONE;
fecp = (volatile fec_t*)dev->base_addr;
/* Get the interrupt events that caused us to be here.
*/
- while ((int_events = fecp->fec_ievent) != 0) {
+ do {
+ int_events = fecp->fec_ievent;
fecp->fec_ievent = int_events;
/* Handle receive event in its own function.
*/
if (int_events & FEC_ENET_RXF) {
- handled = 1;
+ ret = IRQ_HANDLED;
fec_enet_rx(dev);
}
@@ -475,17 +484,18 @@
them as part of the transmit process.
*/
if (int_events & FEC_ENET_TXF) {
- handled = 1;
+ ret = IRQ_HANDLED;
fec_enet_tx(dev);
}
if (int_events & FEC_ENET_MII) {
- handled = 1;
+ ret = IRQ_HANDLED;
fec_enet_mii(dev);
}
- }
- return IRQ_RETVAL(handled);
+ } while (int_events);
+
+ return ret;
}
@@ -498,7 +508,7 @@
struct sk_buff *skb;
fep = netdev_priv(dev);
- spin_lock(&fep->lock);
+ spin_lock_irq(&fep->hw_lock);
bdp = fep->dirty_tx;
while (((status = bdp->cbd_sc) & BD_ENET_TX_READY) == 0) {
@@ -557,7 +567,7 @@
}
}
fep->dirty_tx = (cbd_t *)bdp;
- spin_unlock(&fep->lock);
+ spin_unlock_irq(&fep->hw_lock);
}
@@ -584,6 +594,8 @@
fep = netdev_priv(dev);
fecp = (volatile fec_t*)dev->base_addr;
+ spin_lock_irq(&fep->hw_lock);
+
/* First, grab all of the stats for the incoming packet.
* These get messed up if we get called due to a busy condition.
*/
@@ -689,6 +701,8 @@
*/
fecp->fec_r_des_active = 0;
#endif
+
+ spin_unlock_irq(&fep->hw_lock);
}
@@ -702,11 +716,11 @@
uint mii_reg;
fep = netdev_priv(dev);
+ spin_lock_irq(&fep->mii_lock);
+
ep = fep->hwp;
mii_reg = ep->fec_mii_data;
- spin_lock(&fep->lock);
-
if ((mip = mii_head) == NULL) {
printk("MII and no head!\n");
goto unlock;
@@ -723,7 +737,7 @@
ep->fec_mii_data = mip->mii_regval;
unlock:
- spin_unlock(&fep->lock);
+ spin_unlock_irq(&fep->mii_lock);
}
static int
@@ -737,12 +751,11 @@
/* Add PHY address to register command.
*/
fep = netdev_priv(dev);
+ spin_lock_irqsave(&fep->mii_lock, flags);
+
regval |= fep->phy_addr << 23;
-
retval = 0;
- spin_lock_irqsave(&fep->lock,flags);
-
if ((mip = mii_free) != NULL) {
mii_free = mip->mii_next;
mip->mii_regval = regval;
@@ -759,9 +772,8 @@
retval = 1;
}
- spin_unlock_irqrestore(&fep->lock,flags);
-
- return(retval);
+ spin_unlock_irqrestore(&fep->mii_lock, flags);
+ return retval;
}
static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c)
@@ -1222,7 +1234,7 @@
};
/* ------------------------------------------------------------------------- */
-#if !defined(CONFIG_M532x)
+#ifdef HAVE_mii_link_interrupt
#ifdef CONFIG_RPXCLASSIC
static void
mii_link_interrupt(void *dev_id);
@@ -1362,18 +1374,8 @@
unsigned short irq;
} *idp, id[] = {
{ "fec(TXF)", 23 },
- { "fec(TXB)", 24 },
- { "fec(TXFIFO)", 25 },
- { "fec(TXCR)", 26 },
{ "fec(RXF)", 27 },
- { "fec(RXB)", 28 },
{ "fec(MII)", 29 },
- { "fec(LC)", 30 },
- { "fec(HBERR)", 31 },
- { "fec(GRA)", 32 },
- { "fec(EBERR)", 33 },
- { "fec(BABT)", 34 },
- { "fec(BABR)", 35 },
{ NULL },
};
@@ -1533,18 +1535,8 @@
unsigned short irq;
} *idp, id[] = {
{ "fec(TXF)", 23 },
- { "fec(TXB)", 24 },
- { "fec(TXFIFO)", 25 },
- { "fec(TXCR)", 26 },
{ "fec(RXF)", 27 },
- { "fec(RXB)", 28 },
{ "fec(MII)", 29 },
- { "fec(LC)", 30 },
- { "fec(HBERR)", 31 },
- { "fec(GRA)", 32 },
- { "fec(EBERR)", 33 },
- { "fec(BABT)", 34 },
- { "fec(BABR)", 35 },
{ NULL },
};
@@ -1660,18 +1652,8 @@
unsigned short irq;
} *idp, id[] = {
{ "fec(TXF)", 36 },
- { "fec(TXB)", 37 },
- { "fec(TXFIFO)", 38 },
- { "fec(TXCR)", 39 },
{ "fec(RXF)", 40 },
- { "fec(RXB)", 41 },
{ "fec(MII)", 42 },
- { "fec(LC)", 43 },
- { "fec(HBERR)", 44 },
- { "fec(GRA)", 45 },
- { "fec(EBERR)", 46 },
- { "fec(BABT)", 47 },
- { "fec(BABR)", 48 },
{ NULL },
};
@@ -2126,6 +2108,7 @@
/* This interrupt occurs when the PHY detects a link change.
*/
+#ifdef HAVE_mii_link_interrupt
#ifdef CONFIG_RPXCLASSIC
static void
mii_link_interrupt(void *dev_id)
@@ -2148,6 +2131,7 @@
return IRQ_HANDLED;
}
+#endif
static int
fec_enet_open(struct net_device *dev)
@@ -2243,13 +2227,13 @@
/* Catch all multicast addresses, so set the
* filter to all 1's.
*/
- ep->fec_hash_table_high = 0xffffffff;
- ep->fec_hash_table_low = 0xffffffff;
+ ep->fec_grp_hash_table_high = 0xffffffff;
+ ep->fec_grp_hash_table_low = 0xffffffff;
} else {
/* Clear filter and add the addresses in hash register.
*/
- ep->fec_hash_table_high = 0;
- ep->fec_hash_table_low = 0;
+ ep->fec_grp_hash_table_high = 0;
+ ep->fec_grp_hash_table_low = 0;
dmi = dev->mc_list;
@@ -2280,9 +2264,9 @@
hash = (crc >> (32 - HASH_BITS)) & 0x3f;
if (hash > 31)
- ep->fec_hash_table_high |= 1 << (hash - 32);
+ ep->fec_grp_hash_table_high |= 1 << (hash - 32);
else
- ep->fec_hash_table_low |= 1 << hash;
+ ep->fec_grp_hash_table_low |= 1 << hash;
}
}
}
@@ -2332,6 +2316,9 @@
return -ENOMEM;
}
+ spin_lock_init(&fep->hw_lock);
+ spin_lock_init(&fep->mii_lock);
+
/* Create an Ethernet device instance.
*/
fecp = (volatile fec_t *) fec_hw[index];
@@ -2430,11 +2417,15 @@
*/
fec_request_intrs(dev);
- fecp->fec_hash_table_high = 0;
- fecp->fec_hash_table_low = 0;
+ fecp->fec_grp_hash_table_high = 0;
+ fecp->fec_grp_hash_table_low = 0;
fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
fecp->fec_ecntrl = 2;
fecp->fec_r_des_active = 0;
+#ifndef CONFIG_M5272
+ fecp->fec_hash_table_high = 0;
+ fecp->fec_hash_table_low = 0;
+#endif
dev->base_addr = (unsigned long)fecp;
@@ -2455,8 +2446,7 @@
/* Clear and enable interrupts */
fecp->fec_ievent = 0xffc00000;
- fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
- FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
+ fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII);
/* Queue up command to detect the PHY and initialize the
* remainder of the interface.
@@ -2500,8 +2490,8 @@
/* Reset all multicast.
*/
- fecp->fec_hash_table_high = 0;
- fecp->fec_hash_table_low = 0;
+ fecp->fec_grp_hash_table_high = 0;
+ fecp->fec_grp_hash_table_low = 0;
/* Set maximum receive buffer size.
*/
@@ -2583,8 +2573,7 @@
/* Enable interrupts we wish to service.
*/
- fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
- FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
+ fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII);
}
static void
@@ -2624,7 +2613,7 @@
static int __init fec_enet_module_init(void)
{
struct net_device *dev;
- int i, j, err;
+ int i, err;
DECLARE_MAC_BUF(mac);
printk("FEC ENET Version 0.2\n");
diff --git a/drivers/net/fec.h b/drivers/net/fec.h
index 1d42160..292719d 100644
--- a/drivers/net/fec.h
+++ b/drivers/net/fec.h
@@ -88,8 +88,8 @@
unsigned long fec_reserved7[158];
unsigned long fec_addr_low; /* Low 32bits MAC address */
unsigned long fec_addr_high; /* High 16bits MAC address */
- unsigned long fec_hash_table_high; /* High 32bits hash table */
- unsigned long fec_hash_table_low; /* Low 32bits hash table */
+ unsigned long fec_grp_hash_table_high;/* High 32bits hash table */
+ unsigned long fec_grp_hash_table_low; /* Low 32bits hash table */
unsigned long fec_r_des_start; /* Receive descriptor ring */
unsigned long fec_x_des_start; /* Transmit descriptor ring */
unsigned long fec_r_buff_size; /* Maximum receive buff size */
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index d21b7ab..5f9c42e 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -43,6 +43,29 @@
#define DRIVER_NAME "mpc52xx-fec"
+#define FEC5200_PHYADDR_NONE (-1)
+#define FEC5200_PHYADDR_7WIRE (-2)
+
+/* Private driver data structure */
+struct mpc52xx_fec_priv {
+ int duplex;
+ int speed;
+ int r_irq;
+ int t_irq;
+ struct mpc52xx_fec __iomem *fec;
+ struct bcom_task *rx_dmatsk;
+ struct bcom_task *tx_dmatsk;
+ spinlock_t lock;
+ int msg_enable;
+
+ /* MDIO link details */
+ int phy_addr;
+ unsigned int phy_speed;
+ struct phy_device *phydev;
+ enum phy_state link;
+};
+
+
static irqreturn_t mpc52xx_fec_interrupt(int, void *);
static irqreturn_t mpc52xx_fec_rx_interrupt(int, void *);
static irqreturn_t mpc52xx_fec_tx_interrupt(int, void *);
@@ -223,7 +246,7 @@
struct mpc52xx_fec_priv *priv = netdev_priv(dev);
int err;
- if (!priv->has_phy)
+ if (priv->phy_addr < 0)
return 0;
err = mpc52xx_fec_init_phy(dev);
@@ -243,7 +266,7 @@
{
struct mpc52xx_fec_priv *priv = netdev_priv(dev);
- if (!priv->has_phy)
+ if (!priv->phydev)
return;
phy_disconnect(priv->phydev);
@@ -255,7 +278,7 @@
static int mpc52xx_fec_phy_mii_ioctl(struct mpc52xx_fec_priv *priv,
struct mii_ioctl_data *mii_data, int cmd)
{
- if (!priv->has_phy)
+ if (!priv->phydev)
return -ENOTSUPP;
return phy_mii_ioctl(priv->phydev, mii_data, cmd);
@@ -265,7 +288,7 @@
{
struct mpc52xx_fec __iomem *fec = priv->fec;
- if (!priv->has_phy)
+ if (priv->phydev)
return;
out_be32(&fec->mii_speed, priv->phy_speed);
@@ -704,7 +727,7 @@
rcntrl = FEC_RX_BUFFER_SIZE << 16; /* max frame length */
rcntrl |= FEC_RCNTRL_FCE;
- if (priv->has_phy)
+ if (priv->phy_addr != FEC5200_PHYADDR_7WIRE)
rcntrl |= FEC_RCNTRL_MII_MODE;
if (priv->duplex == DUPLEX_FULL)
@@ -864,7 +887,10 @@
struct net_device *ndev;
struct mpc52xx_fec_priv *priv = NULL;
struct resource mem;
- const phandle *ph;
+ struct device_node *phy_node;
+ const phandle *phy_handle;
+ const u32 *prop;
+ int prop_size;
phys_addr_t rx_fifo;
phys_addr_t tx_fifo;
@@ -948,26 +974,37 @@
mpc52xx_fec_get_paddr(ndev, ndev->dev_addr);
priv->msg_enable = netif_msg_init(debug, MPC52xx_MESSAGES_DEFAULT);
- priv->duplex = DUPLEX_FULL;
- /* is the phy present in device tree? */
- ph = of_get_property(op->node, "phy-handle", NULL);
- if (ph) {
- const unsigned int *prop;
- struct device_node *phy_dn;
- priv->has_phy = 1;
+ /*
+ * Link mode configuration
+ */
- phy_dn = of_find_node_by_phandle(*ph);
- prop = of_get_property(phy_dn, "reg", NULL);
- priv->phy_addr = *prop;
+ /* Start with safe defaults for link connection */
+ priv->phy_addr = FEC5200_PHYADDR_NONE;
+ priv->speed = 100;
+ priv->duplex = DUPLEX_HALF;
+ priv->phy_speed = ((mpc52xx_find_ipb_freq(op->node) >> 20) / 5) << 1;
- of_node_put(phy_dn);
+ /* the 7-wire property means don't use MII mode */
+ if (of_find_property(op->node, "fsl,7-wire-mode", NULL))
+ priv->phy_addr = FEC5200_PHYADDR_7WIRE;
- /* Phy speed */
- priv->phy_speed = ((mpc52xx_find_ipb_freq(op->node) >> 20) / 5) << 1;
- } else {
- dev_info(&ndev->dev, "can't find \"phy-handle\" in device"
- " tree, using 7-wire mode\n");
+ /* The current speed preconfigures the speed of the MII link */
+ prop = of_get_property(op->node, "current-speed", &prop_size);
+ if (prop && (prop_size >= sizeof(u32) * 2)) {
+ priv->speed = prop[0];
+ priv->duplex = prop[1] ? DUPLEX_FULL : DUPLEX_HALF;
+ }
+
+ /* If there is a phy handle, setup link to that phy */
+ phy_handle = of_get_property(op->node, "phy-handle", &prop_size);
+ if (phy_handle && (prop_size >= sizeof(phandle))) {
+ phy_node = of_find_node_by_phandle(*phy_handle);
+ prop = of_get_property(phy_node, "reg", &prop_size);
+ if (prop && (prop_size >= sizeof(u32)))
+ if ((*prop >= 0) && (*prop < PHY_MAX_ADDR))
+ priv->phy_addr = *prop;
+ of_node_put(phy_node);
}
/* Hardware init */
@@ -982,6 +1019,20 @@
if (rv < 0)
goto probe_error;
+ /* Now report the link setup */
+ switch (priv->phy_addr) {
+ case FEC5200_PHYADDR_NONE:
+ dev_info(&ndev->dev, "Fixed speed MII link: %i%cD\n",
+ priv->speed, priv->duplex ? 'F' : 'H');
+ break;
+ case FEC5200_PHYADDR_7WIRE:
+ dev_info(&ndev->dev, "using 7-wire PHY mode\n");
+ break;
+ default:
+ dev_info(&ndev->dev, "Using PHY at MDIO address %i\n",
+ priv->phy_addr);
+ }
+
/* We're done ! */
dev_set_drvdata(&op->dev, ndev);
diff --git a/drivers/net/fec_mpc52xx.h b/drivers/net/fec_mpc52xx.h
index 8b1f753..a227a52 100644
--- a/drivers/net/fec_mpc52xx.h
+++ b/drivers/net/fec_mpc52xx.h
@@ -26,25 +26,6 @@
#define FEC_WATCHDOG_TIMEOUT ((400*HZ)/1000)
-struct mpc52xx_fec_priv {
- int duplex;
- int r_irq;
- int t_irq;
- struct mpc52xx_fec __iomem *fec;
- struct bcom_task *rx_dmatsk;
- struct bcom_task *tx_dmatsk;
- spinlock_t lock;
- int msg_enable;
-
- int has_phy;
- unsigned int phy_speed;
- unsigned int phy_addr;
- struct phy_device *phydev;
- enum phy_state link;
- int speed;
-};
-
-
/* ======================================================================== */
/* Hardware register sets & bits */
/* ======================================================================== */
diff --git a/drivers/net/mlx4/mr.c b/drivers/net/mlx4/mr.c
index cb46446..03a9abc 100644
--- a/drivers/net/mlx4/mr.c
+++ b/drivers/net/mlx4/mr.c
@@ -551,7 +551,7 @@
u64 mtt_seg;
int err = -ENOMEM;
- if (page_shift < 12 || page_shift >= 32)
+ if (page_shift < (ffs(dev->caps.page_size_cap) - 1) || page_shift >= 32)
return -EINVAL;
/* All MTTs must fit in the same page */
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index 6f245cf..dc6f097 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -1381,6 +1381,10 @@
USB_DEVICE (0x0411, 0x003d),
.driver_info = (unsigned long) &ax8817x_info,
}, {
+ // Buffalo LUA-U2-GT 10/100/1000
+ USB_DEVICE (0x0411, 0x006e),
+ .driver_info = (unsigned long) &ax88178_info,
+}, {
// Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter"
USB_DEVICE (0x6189, 0x182d),
.driver_info = (unsigned long) &ax8817x_info,
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 555b70c..f926b5a 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -41,6 +41,9 @@
struct net_device *dev;
struct napi_struct napi;
+ /* The skb we couldn't send because buffers were full. */
+ struct sk_buff *last_xmit_skb;
+
/* Number of input buffers, and max we've ever had. */
unsigned int num, max;
@@ -142,10 +145,10 @@
static void try_fill_recv(struct virtnet_info *vi)
{
struct sk_buff *skb;
- struct scatterlist sg[1+MAX_SKB_FRAGS];
+ struct scatterlist sg[2+MAX_SKB_FRAGS];
int num, err;
- sg_init_table(sg, 1+MAX_SKB_FRAGS);
+ sg_init_table(sg, 2+MAX_SKB_FRAGS);
for (;;) {
skb = netdev_alloc_skb(vi->dev, MAX_PACKET_LEN);
if (unlikely(!skb))
@@ -221,23 +224,22 @@
while ((skb = vi->svq->vq_ops->get_buf(vi->svq, &len)) != NULL) {
pr_debug("Sent skb %p\n", skb);
__skb_unlink(skb, &vi->send);
- vi->dev->stats.tx_bytes += len;
+ vi->dev->stats.tx_bytes += skb->len;
vi->dev->stats.tx_packets++;
kfree_skb(skb);
}
}
-static int start_xmit(struct sk_buff *skb, struct net_device *dev)
+static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb)
{
- struct virtnet_info *vi = netdev_priv(dev);
- int num, err;
- struct scatterlist sg[1+MAX_SKB_FRAGS];
+ int num;
+ struct scatterlist sg[2+MAX_SKB_FRAGS];
struct virtio_net_hdr *hdr;
const unsigned char *dest = ((struct ethhdr *)skb->data)->h_dest;
- sg_init_table(sg, 1+MAX_SKB_FRAGS);
+ sg_init_table(sg, 2+MAX_SKB_FRAGS);
- pr_debug("%s: xmit %p " MAC_FMT "\n", dev->name, skb,
+ pr_debug("%s: xmit %p " MAC_FMT "\n", vi->dev->name, skb,
dest[0], dest[1], dest[2],
dest[3], dest[4], dest[5]);
@@ -272,30 +274,51 @@
vnet_hdr_to_sg(sg, skb);
num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1;
- __skb_queue_head(&vi->send, skb);
+
+ return vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb);
+}
+
+static int start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct virtnet_info *vi = netdev_priv(dev);
again:
/* Free up any pending old buffers before queueing new ones. */
free_old_xmit_skbs(vi);
- err = vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb);
- if (err) {
- pr_debug("%s: virtio not prepared to send\n", dev->name);
- netif_stop_queue(dev);
- /* Activate callback for using skbs: if this returns false it
- * means some were used in the meantime. */
- if (unlikely(!vi->svq->vq_ops->enable_cb(vi->svq))) {
- vi->svq->vq_ops->disable_cb(vi->svq);
- netif_start_queue(dev);
- goto again;
+ /* If we has a buffer left over from last time, send it now. */
+ if (vi->last_xmit_skb) {
+ if (xmit_skb(vi, vi->last_xmit_skb) != 0) {
+ /* Drop this skb: we only queue one. */
+ vi->dev->stats.tx_dropped++;
+ kfree_skb(skb);
+ goto stop_queue;
}
- __skb_unlink(skb, &vi->send);
-
- return NETDEV_TX_BUSY;
+ vi->last_xmit_skb = NULL;
}
- vi->svq->vq_ops->kick(vi->svq);
- return 0;
+ /* Put new one in send queue and do transmit */
+ __skb_queue_head(&vi->send, skb);
+ if (xmit_skb(vi, skb) != 0) {
+ vi->last_xmit_skb = skb;
+ goto stop_queue;
+ }
+done:
+ vi->svq->vq_ops->kick(vi->svq);
+ return NETDEV_TX_OK;
+
+stop_queue:
+ pr_debug("%s: virtio not prepared to send\n", dev->name);
+ netif_stop_queue(dev);
+
+ /* Activate callback for using skbs: if this returns false it
+ * means some were used in the meantime. */
+ if (unlikely(!vi->svq->vq_ops->enable_cb(vi->svq))) {
+ vi->svq->vq_ops->disable_cb(vi->svq);
+ netif_start_queue(dev);
+ goto again;
+ }
+ goto done;
}
#ifdef CONFIG_NET_POLL_CONTROLLER
@@ -355,17 +378,26 @@
SET_NETDEV_DEV(dev, &vdev->dev);
/* Do we support "hardware" checksums? */
- if (csum && vdev->config->feature(vdev, VIRTIO_NET_F_CSUM)) {
+ if (csum && virtio_has_feature(vdev, VIRTIO_NET_F_CSUM)) {
/* This opens up the world of extra features. */
dev->features |= NETIF_F_HW_CSUM|NETIF_F_SG|NETIF_F_FRAGLIST;
- if (gso && vdev->config->feature(vdev, VIRTIO_NET_F_GSO)) {
+ if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_GSO)) {
dev->features |= NETIF_F_TSO | NETIF_F_UFO
| NETIF_F_TSO_ECN | NETIF_F_TSO6;
}
+ /* Individual feature bits: what can host handle? */
+ if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_HOST_TSO4))
+ dev->features |= NETIF_F_TSO;
+ if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_HOST_TSO6))
+ dev->features |= NETIF_F_TSO6;
+ if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_HOST_ECN))
+ dev->features |= NETIF_F_TSO_ECN;
+ if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_HOST_UFO))
+ dev->features |= NETIF_F_UFO;
}
/* Configuration may specify what MAC to use. Otherwise random. */
- if (vdev->config->feature(vdev, VIRTIO_NET_F_MAC)) {
+ if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC)) {
vdev->config->get(vdev,
offsetof(struct virtio_net_config, mac),
dev->dev_addr, dev->addr_len);
@@ -454,7 +486,15 @@
{ 0 },
};
+static unsigned int features[] = {
+ VIRTIO_NET_F_CSUM, VIRTIO_NET_F_GSO, VIRTIO_NET_F_MAC,
+ VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_UFO, VIRTIO_NET_F_HOST_TSO6,
+ VIRTIO_NET_F_HOST_ECN,
+};
+
static struct virtio_driver virtio_net = {
+ .feature_table = features,
+ .feature_table_size = ARRAY_SIZE(features),
.driver.name = KBUILD_MODNAME,
.driver.owner = THIS_MODULE,
.id_table = id_table,
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c
index 5dd23c9..883af89 100644
--- a/drivers/net/wireless/strip.c
+++ b/drivers/net/wireless/strip.c
@@ -2611,7 +2611,7 @@
* We need a write method.
*/
- if (tty->ops->write == NULL)
+ if (tty->ops->write == NULL || tty->ops->set_termios == NULL)
return -EOPNOTSUPP;
/*
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 1fd8bb7..66c0fd2 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -49,7 +49,7 @@
#define DEFAULT_DOMAIN_ADDRESS_WIDTH 48
-#define DMAR_OPERATION_TIMEOUT (HZ*60) /* 1m */
+#define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000) /* 10sec */
#define DOMAIN_MAX_ADDR(gaw) ((((u64)1) << gaw) - 1)
@@ -490,12 +490,12 @@
#define IOMMU_WAIT_OP(iommu, offset, op, cond, sts) \
{\
- unsigned long start_time = jiffies;\
+ cycles_t start_time = get_cycles();\
while (1) {\
sts = op (iommu->reg + offset);\
if (cond)\
break;\
- if (time_after(jiffies, start_time + DMAR_OPERATION_TIMEOUT))\
+ if (DMAR_OPERATION_TIMEOUT < (get_cycles() - start_time))\
panic("DMAR hardware is malfunctioning\n");\
cpu_relax();\
}\
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 72f7476..9d6fc8e 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -19,8 +19,31 @@
#include <linux/pci-acpi.h>
#include "pci.h"
-static u32 ctrlset_buf[3] = {0, 0, 0};
-static u32 global_ctrlsets = 0;
+struct acpi_osc_data {
+ acpi_handle handle;
+ u32 ctrlset_buf[3];
+ u32 global_ctrlsets;
+ struct list_head sibiling;
+};
+static LIST_HEAD(acpi_osc_data_list);
+
+static struct acpi_osc_data *acpi_get_osc_data(acpi_handle handle)
+{
+ struct acpi_osc_data *data;
+
+ list_for_each_entry(data, &acpi_osc_data_list, sibiling) {
+ if (data->handle == handle)
+ return data;
+ }
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return NULL;
+ INIT_LIST_HEAD(&data->sibiling);
+ data->handle = handle;
+ list_add_tail(&data->sibiling, &acpi_osc_data_list);
+ return data;
+}
+
static u8 OSC_UUID[16] = {0x5B, 0x4D, 0xDB, 0x33, 0xF7, 0x1F, 0x1C, 0x40, 0x96, 0x57, 0x74, 0x41, 0xC0, 0x3D, 0xD7, 0x66};
static acpi_status
@@ -37,8 +60,27 @@
union acpi_object *out_obj;
u32 osc_dw0;
acpi_status *ret_status = (acpi_status *)retval;
+ struct acpi_osc_data *osc_data;
+ u32 flags = (unsigned long)context, temp;
+ acpi_handle tmp;
-
+ status = acpi_get_handle(handle, "_OSC", &tmp);
+ if (ACPI_FAILURE(status))
+ return status;
+
+ osc_data = acpi_get_osc_data(handle);
+ if (!osc_data) {
+ printk(KERN_ERR "acpi osc data array is full\n");
+ return AE_ERROR;
+ }
+
+ osc_data->ctrlset_buf[OSC_SUPPORT_TYPE] |= (flags & OSC_SUPPORT_MASKS);
+
+ /* do _OSC query for all possible controls */
+ temp = osc_data->ctrlset_buf[OSC_CONTROL_TYPE];
+ osc_data->ctrlset_buf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
+ osc_data->ctrlset_buf[OSC_CONTROL_TYPE] = OSC_CONTROL_MASKS;
+
/* Setting up input parameters */
input.count = 4;
input.pointer = in_params;
@@ -51,13 +93,11 @@
in_params[2].integer.value = 3;
in_params[3].type = ACPI_TYPE_BUFFER;
in_params[3].buffer.length = 12;
- in_params[3].buffer.pointer = (u8 *)context;
+ in_params[3].buffer.pointer = (u8 *)osc_data->ctrlset_buf;
status = acpi_evaluate_object(handle, "_OSC", &input, &output);
- if (ACPI_FAILURE (status)) {
- *ret_status = status;
- return status;
- }
+ if (ACPI_FAILURE(status))
+ goto out_nofree;
out_obj = output.pointer;
if (out_obj->type != ACPI_TYPE_BUFFER) {
@@ -76,7 +116,8 @@
printk(KERN_DEBUG "_OSC invalid revision\n");
if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) {
/* Update Global Control Set */
- global_ctrlsets = *((u32 *)(out_obj->buffer.pointer+8));
+ osc_data->global_ctrlsets =
+ *((u32 *)(out_obj->buffer.pointer + 8));
status = AE_OK;
goto query_osc_out;
}
@@ -85,12 +126,21 @@
}
/* Update Global Control Set */
- global_ctrlsets = *((u32 *)(out_obj->buffer.pointer + 8));
+ osc_data->global_ctrlsets = *((u32 *)(out_obj->buffer.pointer + 8));
status = AE_OK;
query_osc_out:
kfree(output.pointer);
+out_nofree:
*ret_status = status;
+
+ osc_data->ctrlset_buf[OSC_QUERY_TYPE] = !OSC_QUERY_ENABLE;
+ osc_data->ctrlset_buf[OSC_CONTROL_TYPE] = temp;
+ if (ACPI_FAILURE(status)) {
+ /* no osc support at all */
+ osc_data->ctrlset_buf[OSC_SUPPORT_TYPE] = 0;
+ }
+
return status;
}
@@ -165,28 +215,15 @@
**/
acpi_status __pci_osc_support_set(u32 flags, const char *hid)
{
- u32 temp;
- acpi_status retval;
+ acpi_status retval = AE_NOT_FOUND;
if (!(flags & OSC_SUPPORT_MASKS)) {
return AE_TYPE;
}
- ctrlset_buf[OSC_SUPPORT_TYPE] |= (flags & OSC_SUPPORT_MASKS);
-
- /* do _OSC query for all possible controls */
- temp = ctrlset_buf[OSC_CONTROL_TYPE];
- ctrlset_buf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
- ctrlset_buf[OSC_CONTROL_TYPE] = OSC_CONTROL_MASKS;
acpi_get_devices(hid,
acpi_query_osc,
- ctrlset_buf,
+ (void *)(unsigned long)flags,
(void **) &retval );
- ctrlset_buf[OSC_QUERY_TYPE] = !OSC_QUERY_ENABLE;
- ctrlset_buf[OSC_CONTROL_TYPE] = temp;
- if (ACPI_FAILURE(retval)) {
- /* no osc support at all */
- ctrlset_buf[OSC_SUPPORT_TYPE] = 0;
- }
return AE_OK;
}
@@ -201,19 +238,31 @@
{
acpi_status status;
u32 ctrlset;
+ acpi_handle tmp;
+ struct acpi_osc_data *osc_data;
+
+ status = acpi_get_handle(handle, "_OSC", &tmp);
+ if (ACPI_FAILURE(status))
+ return status;
+
+ osc_data = acpi_get_osc_data(handle);
+ if (!osc_data) {
+ printk(KERN_ERR "acpi osc data array is full\n");
+ return AE_ERROR;
+ }
ctrlset = (flags & OSC_CONTROL_MASKS);
if (!ctrlset) {
return AE_TYPE;
}
- if (ctrlset_buf[OSC_SUPPORT_TYPE] &&
- ((global_ctrlsets & ctrlset) != ctrlset)) {
+ if (osc_data->ctrlset_buf[OSC_SUPPORT_TYPE] &&
+ ((osc_data->global_ctrlsets & ctrlset) != ctrlset)) {
return AE_SUPPORT;
}
- ctrlset_buf[OSC_CONTROL_TYPE] |= ctrlset;
- status = acpi_run_osc(handle, ctrlset_buf);
+ osc_data->ctrlset_buf[OSC_CONTROL_TYPE] |= ctrlset;
+ status = acpi_run_osc(handle, osc_data->ctrlset_buf);
if (ACPI_FAILURE (status)) {
- ctrlset_buf[OSC_CONTROL_TYPE] &= ~ctrlset;
+ osc_data->ctrlset_buf[OSC_CONTROL_TYPE] &= ~ctrlset;
}
return status;
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 4a55bf3..3706ce7 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -842,26 +842,10 @@
* reading the dword at 0x100 which must either be 0 or a valid extended
* capability header.
*/
-int pci_cfg_space_size_ext(struct pci_dev *dev, unsigned check_exp_pcix)
+int pci_cfg_space_size_ext(struct pci_dev *dev)
{
- int pos;
u32 status;
- if (!check_exp_pcix)
- goto skip;
-
- pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
- if (!pos) {
- pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
- if (!pos)
- goto fail;
-
- pci_read_config_dword(dev, pos + PCI_X_STATUS, &status);
- if (!(status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ)))
- goto fail;
- }
-
- skip:
if (pci_read_config_dword(dev, 256, &status) != PCIBIOS_SUCCESSFUL)
goto fail;
if (status == 0xffffffff)
@@ -875,7 +859,24 @@
int pci_cfg_space_size(struct pci_dev *dev)
{
- return pci_cfg_space_size_ext(dev, 1);
+ int pos;
+ u32 status;
+
+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (!pos) {
+ pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+ if (!pos)
+ goto fail;
+
+ pci_read_config_dword(dev, pos + PCI_X_STATUS, &status);
+ if (!(status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ)))
+ goto fail;
+ }
+
+ return pci_cfg_space_size_ext(dev);
+
+ fail:
+ return PCI_CFG_SPACE_SIZE;
}
static void pci_release_bus_bridge_dev(struct device *dev)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index afd914e..f2d9c77 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1826,6 +1826,7 @@
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk);
static void __devinit quirk_msi_intx_disable_bug(struct pci_dev *dev)
{
diff --git a/drivers/pcmcia/au1000_db1x00.c b/drivers/pcmcia/au1000_db1x00.c
index 74e0515..c78d77f 100644
--- a/drivers/pcmcia/au1000_db1x00.c
+++ b/drivers/pcmcia/au1000_db1x00.c
@@ -194,7 +194,7 @@
default:
pwr |= SET_VCC_VPP(0,0,sock);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __FUNCTION__,
+ __func__,
state->Vcc,
state->Vpp);
break;
@@ -215,7 +215,7 @@
default:
pwr |= SET_VCC_VPP(0,0,sock);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __FUNCTION__,
+ __func__,
state->Vcc,
state->Vpp);
break;
@@ -224,7 +224,7 @@
default: /* what's this ? */
pwr |= SET_VCC_VPP(0,0,sock);
printk(KERN_ERR "%s: bad Vcc %d\n",
- __FUNCTION__, state->Vcc);
+ __func__, state->Vcc);
break;
}
diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c
index b693367d..75e8f85 100644
--- a/drivers/pcmcia/au1000_generic.c
+++ b/drivers/pcmcia/au1000_generic.c
@@ -41,6 +41,7 @@
#include <linux/notifier.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
+#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <asm/io.h>
@@ -71,7 +72,7 @@
u32 *pcmcia_base_vaddrs[2];
extern const unsigned long mips_io_port_base;
-DECLARE_MUTEX(pcmcia_sockets_lock);
+static DEFINE_MUTEX(pcmcia_sockets_lock);
static int (*au1x00_pcmcia_hw_init[])(struct device *dev) = {
au1x_board_init,
@@ -472,7 +473,7 @@
struct skt_dev_info *sinfo = dev_get_drvdata(dev);
int i;
- down(&pcmcia_sockets_lock);
+ mutex_lock(&pcmcia_sockets_lock);
dev_set_drvdata(dev, NULL);
for (i = 0; i < sinfo->nskt; i++) {
@@ -488,7 +489,7 @@
}
kfree(sinfo);
- up(&pcmcia_sockets_lock);
+ mutex_unlock(&pcmcia_sockets_lock);
return 0;
}
@@ -501,13 +502,13 @@
{
int i, ret = -ENODEV;
- down(&pcmcia_sockets_lock);
+ mutex_lock(&pcmcia_sockets_lock);
for (i=0; i < ARRAY_SIZE(au1x00_pcmcia_hw_init); i++) {
ret = au1x00_pcmcia_hw_init[i](dev);
if (ret == 0)
break;
}
- up(&pcmcia_sockets_lock);
+ mutex_unlock(&pcmcia_sockets_lock);
return ret;
}
diff --git a/drivers/pcmcia/au1000_pb1x00.c b/drivers/pcmcia/au1000_pb1x00.c
index 86c0808..157e414 100644
--- a/drivers/pcmcia/au1000_pb1x00.c
+++ b/drivers/pcmcia/au1000_pb1x00.c
@@ -244,7 +244,7 @@
pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
configure->sock);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __FUNCTION__,
+ __func__,
configure->vcc,
configure->vpp);
break;
@@ -272,7 +272,7 @@
pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
configure->sock);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __FUNCTION__,
+ __func__,
configure->vcc,
configure->vpp);
break;
@@ -300,7 +300,7 @@
pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
configure->sock);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __FUNCTION__,
+ __func__,
configure->vcc,
configure->vpp);
break;
@@ -309,7 +309,7 @@
default: /* what's this ? */
pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,configure->sock);
printk(KERN_ERR "%s: bad Vcc %d\n",
- __FUNCTION__, configure->vcc);
+ __func__, configure->vcc);
break;
}
@@ -353,7 +353,7 @@
default:
pcr |= SET_VCC_VPP(0,0);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __FUNCTION__,
+ __func__,
configure->vcc,
configure->vpp);
break;
@@ -374,7 +374,7 @@
default:
pcr |= SET_VCC_VPP(0,0);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __FUNCTION__,
+ __func__,
configure->vcc,
configure->vpp);
break;
@@ -383,7 +383,7 @@
default: /* what's this ? */
pcr |= SET_VCC_VPP(0,0);
printk(KERN_ERR "%s: bad Vcc %d\n",
- __FUNCTION__, configure->vcc);
+ __func__, configure->vcc);
break;
}
diff --git a/drivers/pcmcia/au1000_xxs1500.c b/drivers/pcmcia/au1000_xxs1500.c
index ce9d5c4..c78ed53 100644
--- a/drivers/pcmcia/au1000_xxs1500.c
+++ b/drivers/pcmcia/au1000_xxs1500.c
@@ -56,7 +56,7 @@
#define PCMCIA_IRQ AU1000_GPIO_4
#if 0
-#define DEBUG(x,args...) printk(__FUNCTION__ ": " x,##args)
+#define DEBUG(x, args...) printk(__func__ ": " x, ##args)
#else
#define DEBUG(x,args...)
#endif
diff --git a/drivers/pcmcia/cardbus.c b/drivers/pcmcia/cardbus.c
index 714baae..fb2f38d 100644
--- a/drivers/pcmcia/cardbus.c
+++ b/drivers/pcmcia/cardbus.c
@@ -209,7 +209,7 @@
}
}
-int cb_alloc(struct pcmcia_socket * s)
+int __ref cb_alloc(struct pcmcia_socket * s)
{
struct pci_bus *bus = s->cb_dev->subordinate;
struct pci_dev *dev;
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 5a85871..e407754 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -1520,7 +1520,7 @@
/* the pcmcia_bus_interface is used to handle pcmcia socket devices */
-static struct class_interface pcmcia_bus_interface = {
+static struct class_interface pcmcia_bus_interface __refdata = {
.class = &pcmcia_socket_class,
.add_dev = &pcmcia_bus_add_socket,
.remove_dev = &pcmcia_bus_remove_socket,
diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c
index e54ecc5..e136186 100644
--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -53,7 +53,7 @@
}
#endif
-static struct pci_driver i82092aa_pci_drv = {
+static struct pci_driver i82092aa_pci_driver = {
.name = "i82092aa",
.id_table = i82092aa_pci_ids,
.probe = i82092aa_pci_probe,
@@ -714,13 +714,13 @@
static int i82092aa_module_init(void)
{
- return pci_register_driver(&i82092aa_pci_drv);
+ return pci_register_driver(&i82092aa_pci_driver);
}
static void i82092aa_module_exit(void)
{
enter("i82092aa_module_exit");
- pci_unregister_driver(&i82092aa_pci_drv);
+ pci_unregister_driver(&i82092aa_pci_driver);
if (sockets[0].io_base>0)
release_region(sockets[0].io_base, 2);
leave("i82092aa_module_exit");
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index bb6db3a..46314b4 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -153,7 +153,7 @@
static int omap_cf_ss_suspend(struct pcmcia_socket *s)
{
- pr_debug("%s: %s\n", driver_name, __FUNCTION__);
+ pr_debug("%s: %s\n", driver_name, __func__);
return omap_cf_set_socket(s, &dead_socket);
}
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index abc10fe..8bed1da 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -778,7 +778,7 @@
};
MODULE_DEVICE_TABLE(pci, pd6729_pci_ids);
-static struct pci_driver pd6729_pci_drv = {
+static struct pci_driver pd6729_pci_driver = {
.name = "pd6729",
.id_table = pd6729_pci_ids,
.probe = pd6729_pci_probe,
@@ -791,12 +791,12 @@
static int pd6729_module_init(void)
{
- return pci_register_driver(&pd6729_pci_drv);
+ return pci_register_driver(&pd6729_pci_driver);
}
static void pd6729_module_exit(void)
{
- pci_unregister_driver(&pd6729_pci_drv);
+ pci_unregister_driver(&pd6729_pci_driver);
}
module_init(pd6729_module_init);
diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c
index 4a05802..881ec8a8e 100644
--- a/drivers/pcmcia/pxa2xx_lubbock.c
+++ b/drivers/pcmcia/pxa2xx_lubbock.c
@@ -87,7 +87,7 @@
default:
printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
- __FUNCTION__, state->Vcc);
+ __func__, state->Vcc);
ret = -1;
}
@@ -104,7 +104,7 @@
pa_dwr_set |= GPIO_A0;
else {
printk(KERN_ERR "%s(): unrecognized Vpp %u\n",
- __FUNCTION__, state->Vpp);
+ __func__, state->Vpp);
ret = -1;
break;
}
@@ -128,14 +128,14 @@
default:
printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
- __FUNCTION__, state->Vcc);
+ __func__, state->Vcc);
ret = -1;
break;
}
if (state->Vpp != state->Vcc && state->Vpp != 0) {
printk(KERN_ERR "%s(): CF slot cannot support Vpp %u\n",
- __FUNCTION__, state->Vpp);
+ __func__, state->Vpp);
ret = -1;
break;
}
diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c
index 6fa5eaa..145b85e 100644
--- a/drivers/pcmcia/pxa2xx_mainstone.c
+++ b/drivers/pcmcia/pxa2xx_mainstone.c
@@ -99,7 +99,7 @@
case 50: power |= MST_PCMCIA_PWR_VCC_50; break;
default:
printk(KERN_ERR "%s(): bad Vcc %u\n",
- __FUNCTION__, state->Vcc);
+ __func__, state->Vcc);
ret = -1;
}
@@ -111,7 +111,7 @@
power |= MST_PCMCIA_PWR_VPP_VCC;
} else {
printk(KERN_ERR "%s(): bad Vpp %u\n",
- __FUNCTION__, state->Vpp);
+ __func__, state->Vpp);
ret = -1;
}
}
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index a8d1007..0fcf763 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -1045,7 +1045,7 @@
device_remove_file(dev, *attr);
}
-static struct class_interface pccard_rsrc_interface = {
+static struct class_interface pccard_rsrc_interface __refdata = {
.class = &pcmcia_socket_class,
.add_dev = &pccard_sysfs_add_rsrc,
.remove_dev = __devexit_p(&pccard_sysfs_remove_rsrc),
diff --git a/drivers/pcmcia/sa1100_assabet.c b/drivers/pcmcia/sa1100_assabet.c
index 7c57fdd..ce133ce 100644
--- a/drivers/pcmcia/sa1100_assabet.c
+++ b/drivers/pcmcia/sa1100_assabet.c
@@ -66,14 +66,14 @@
case 50:
printk(KERN_WARNING "%s(): CS asked for 5V, applying 3.3V...\n",
- __FUNCTION__);
+ __func__);
case 33: /* Can only apply 3.3V to the CF slot. */
mask = ASSABET_BCR_CF_PWR;
break;
default:
- printk(KERN_ERR "%s(): unrecognized Vcc %u\n", __FUNCTION__,
+ printk(KERN_ERR "%s(): unrecognized Vcc %u\n", __func__,
state->Vcc);
return -1;
}
diff --git a/drivers/pcmcia/sa1100_badge4.c b/drivers/pcmcia/sa1100_badge4.c
index 62bfc7566..607c3f3 100644
--- a/drivers/pcmcia/sa1100_badge4.c
+++ b/drivers/pcmcia/sa1100_badge4.c
@@ -82,14 +82,14 @@
case 0:
if ((state->Vcc != 0) &&
(state->Vcc != badge4_pcmvcc)) {
- complain_about_jumpering(__FUNCTION__, "pcmvcc",
+ complain_about_jumpering(__func__, "pcmvcc",
badge4_pcmvcc, state->Vcc);
// Apply power regardless of the jumpering.
// return -1;
}
if ((state->Vpp != 0) &&
(state->Vpp != badge4_pcmvpp)) {
- complain_about_jumpering(__FUNCTION__, "pcmvpp",
+ complain_about_jumpering(__func__, "pcmvpp",
badge4_pcmvpp, state->Vpp);
return -1;
}
@@ -98,7 +98,7 @@
case 1:
if ((state->Vcc != 0) &&
(state->Vcc != badge4_cfvcc)) {
- complain_about_jumpering(__FUNCTION__, "cfvcc",
+ complain_about_jumpering(__func__, "cfvcc",
badge4_cfvcc, state->Vcc);
return -1;
}
@@ -143,7 +143,7 @@
if (machine_is_badge4()) {
printk(KERN_INFO
"%s: badge4_pcmvcc=%d, badge4_pcmvpp=%d, badge4_cfvcc=%d\n",
- __FUNCTION__,
+ __func__,
badge4_pcmvcc, badge4_pcmvpp, badge4_cfvcc);
ret = sa11xx_drv_pcmcia_probe(dev, &badge4_pcmcia_ops, 0, 2);
diff --git a/drivers/pcmcia/sa1100_cerf.c b/drivers/pcmcia/sa1100_cerf.c
index 549a152..7c3951a 100644
--- a/drivers/pcmcia/sa1100_cerf.c
+++ b/drivers/pcmcia/sa1100_cerf.c
@@ -63,7 +63,7 @@
default:
printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
- __FUNCTION__, state->Vcc);
+ __func__, state->Vcc);
return -1;
}
diff --git a/drivers/pcmcia/sa1100_jornada720.c b/drivers/pcmcia/sa1100_jornada720.c
index 6284c35d..2167e67 100644
--- a/drivers/pcmcia/sa1100_jornada720.c
+++ b/drivers/pcmcia/sa1100_jornada720.c
@@ -42,7 +42,7 @@
unsigned int pa_dwr_mask, pa_dwr_set;
int ret;
-printk("%s(): config socket %d vcc %d vpp %d\n", __FUNCTION__,
+printk("%s(): config socket %d vcc %d vpp %d\n", __func__,
skt->nr, state->Vcc, state->Vpp);
switch (skt->nr) {
@@ -74,7 +74,7 @@
if (state->Vpp != state->Vcc && state->Vpp != 0) {
printk(KERN_ERR "%s(): slot cannot support VPP %u\n",
- __FUNCTION__, state->Vpp);
+ __func__, state->Vpp);
return -1;
}
diff --git a/drivers/pcmcia/sa1100_neponset.c b/drivers/pcmcia/sa1100_neponset.c
index 5bc9e95..687492f 100644
--- a/drivers/pcmcia/sa1100_neponset.c
+++ b/drivers/pcmcia/sa1100_neponset.c
@@ -59,7 +59,7 @@
ncr_set = NCR_A0VPP;
else {
printk(KERN_ERR "%s(): unrecognized VPP %u\n",
- __FUNCTION__, state->Vpp);
+ __func__, state->Vpp);
return -1;
}
break;
@@ -71,7 +71,7 @@
if (state->Vpp != state->Vcc && state->Vpp != 0) {
printk(KERN_ERR "%s(): CF slot cannot support VPP %u\n",
- __FUNCTION__, state->Vpp);
+ __func__, state->Vpp);
return -1;
}
break;
diff --git a/drivers/pcmcia/sa1100_shannon.c b/drivers/pcmcia/sa1100_shannon.c
index 9456f54..494912f 100644
--- a/drivers/pcmcia/sa1100_shannon.c
+++ b/drivers/pcmcia/sa1100_shannon.c
@@ -73,19 +73,19 @@
{
switch (state->Vcc) {
case 0: /* power off */
- printk(KERN_WARNING "%s(): CS asked for 0V, still applying 3.3V..\n", __FUNCTION__);
+ printk(KERN_WARNING "%s(): CS asked for 0V, still applying 3.3V..\n", __func__);
break;
case 50:
- printk(KERN_WARNING "%s(): CS asked for 5V, applying 3.3V..\n", __FUNCTION__);
+ printk(KERN_WARNING "%s(): CS asked for 5V, applying 3.3V..\n", __func__);
case 33:
break;
default:
printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
- __FUNCTION__, state->Vcc);
+ __func__, state->Vcc);
return -1;
}
- printk(KERN_WARNING "%s(): Warning, Can't perform reset\n", __FUNCTION__);
+ printk(KERN_WARNING "%s(): Warning, Can't perform reset\n", __func__);
/* Silently ignore Vpp, output enable, speaker enable. */
diff --git a/drivers/pcmcia/sa1100_simpad.c b/drivers/pcmcia/sa1100_simpad.c
index 04d6f7f..42567de 100644
--- a/drivers/pcmcia/sa1100_simpad.c
+++ b/drivers/pcmcia/sa1100_simpad.c
@@ -90,7 +90,7 @@
default:
printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
- __FUNCTION__, state->Vcc);
+ __func__, state->Vcc);
clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
local_irq_restore(flags);
return -1;
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index aa7779d..420a775 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -37,6 +37,7 @@
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/mm.h>
+#include <linux/mutex.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/spinlock.h>
@@ -353,7 +354,7 @@
(map->flags&MAP_PREFETCH)?"PREFETCH ":"");
if (map->map >= MAX_IO_WIN) {
- printk(KERN_ERR "%s(): map (%d) out of range\n", __FUNCTION__,
+ printk(KERN_ERR "%s(): map (%d) out of range\n", __func__,
map->map);
return -1;
}
@@ -578,7 +579,7 @@
LIST_HEAD(soc_pcmcia_sockets);
-DECLARE_MUTEX(soc_pcmcia_sockets_lock);
+static DEFINE_MUTEX(soc_pcmcia_sockets_lock);
static const char *skt_names[] = {
"PCMCIA socket 0",
@@ -601,11 +602,11 @@
struct cpufreq_freqs *freqs = data;
int ret = 0;
- down(&soc_pcmcia_sockets_lock);
+ mutex_lock(&soc_pcmcia_sockets_lock);
list_for_each_entry(skt, &soc_pcmcia_sockets, node)
if ( skt->ops->frequency_change )
ret += skt->ops->frequency_change(skt, val, freqs);
- up(&soc_pcmcia_sockets_lock);
+ mutex_unlock(&soc_pcmcia_sockets_lock);
return ret;
}
@@ -642,7 +643,7 @@
struct soc_pcmcia_socket *skt;
int ret, i;
- down(&soc_pcmcia_sockets_lock);
+ mutex_lock(&soc_pcmcia_sockets_lock);
sinfo = kzalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL);
if (!sinfo) {
@@ -782,7 +783,7 @@
kfree(sinfo);
out:
- up(&soc_pcmcia_sockets_lock);
+ mutex_unlock(&soc_pcmcia_sockets_lock);
return ret;
}
@@ -793,7 +794,7 @@
dev_set_drvdata(dev, NULL);
- down(&soc_pcmcia_sockets_lock);
+ mutex_lock(&soc_pcmcia_sockets_lock);
for (i = 0; i < sinfo->nskt; i++) {
struct soc_pcmcia_socket *skt = &sinfo->skt[i];
@@ -818,7 +819,7 @@
if (list_empty(&soc_pcmcia_sockets))
soc_pcmcia_cpufreq_unregister();
- up(&soc_pcmcia_sockets_lock);
+ mutex_unlock(&soc_pcmcia_sockets_lock);
kfree(sinfo);
diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h
index 6f14126..1edc1da 100644
--- a/drivers/pcmcia/soc_common.h
+++ b/drivers/pcmcia/soc_common.h
@@ -133,7 +133,6 @@
extern struct list_head soc_pcmcia_sockets;
-extern struct semaphore soc_pcmcia_sockets_lock;
extern int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr);
extern int soc_common_drv_pcmcia_remove(struct device *dev);
diff --git a/drivers/pnp/interface.c b/drivers/pnp/interface.c
index 5d9301de..5695a79 100644
--- a/drivers/pnp/interface.c
+++ b/drivers/pnp/interface.c
@@ -424,7 +424,7 @@
start = simple_strtoul(buf, &buf, 0);
pnp_res = pnp_add_irq_resource(dev, start, 0);
if (pnp_res)
- nirq++;
+ pnp_res->index = nirq++;
continue;
}
if (!strnicmp(buf, "dma", 3)) {
diff --git a/drivers/pnp/pnpbios/rsparser.c b/drivers/pnp/pnpbios/rsparser.c
index 2e2c457..5ff9a4c 100644
--- a/drivers/pnp/pnpbios/rsparser.c
+++ b/drivers/pnp/pnpbios/rsparser.c
@@ -591,7 +591,8 @@
p[1] = map & 0xff;
p[2] = (map >> 8) & 0xff;
- dev_dbg(&dev->dev, " encode irq %d\n", res->start);
+ dev_dbg(&dev->dev, " encode irq %llu\n",
+ (unsigned long long)res->start);
}
static void pnpbios_encode_dma(struct pnp_dev *dev, unsigned char *p,
@@ -602,7 +603,8 @@
map = 1 << res->start;
p[1] = map & 0xff;
- dev_dbg(&dev->dev, " encode dma %d\n", res->start);
+ dev_dbg(&dev->dev, " encode dma %llu\n",
+ (unsigned long long)res->start);
}
static void pnpbios_encode_port(struct pnp_dev *dev, unsigned char *p,
diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c
index c8aa55b..82810b7bf 100644
--- a/drivers/power/pda_power.c
+++ b/drivers/power/pda_power.c
@@ -209,6 +209,12 @@
pdata = pdev->dev.platform_data;
+ if (pdata->init) {
+ ret = pdata->init(dev);
+ if (ret < 0)
+ goto init_failed;
+ }
+
update_status();
update_charger();
@@ -298,6 +304,9 @@
if (pdata->is_ac_online)
power_supply_unregister(&pda_psy_ac);
ac_supply_failed:
+ if (pdata->exit)
+ pdata->exit(dev);
+init_failed:
wrongid:
return ret;
}
@@ -318,6 +327,8 @@
power_supply_unregister(&pda_psy_usb);
if (pdata->is_ac_online)
power_supply_unregister(&pda_psy_ac);
+ if (pdata->exit)
+ pdata->exit(dev);
return 0;
}
diff --git a/drivers/power/pmu_battery.c b/drivers/power/pmu_battery.c
index 60a8cf3a..9346a86 100644
--- a/drivers/power/pmu_battery.c
+++ b/drivers/power/pmu_battery.c
@@ -159,7 +159,7 @@
if (!pbat)
break;
- sprintf(pbat->name, "PMU battery %d", i);
+ sprintf(pbat->name, "PMU_battery_%d", i);
pbat->bat.name = pbat->name;
pbat->bat.properties = pmu_bat_props;
pbat->bat.num_properties = ARRAY_SIZE(pmu_bat_props);
diff --git a/drivers/ps3/ps3-lpm.c b/drivers/ps3/ps3-lpm.c
index 6c9592c..85edf94 100644
--- a/drivers/ps3/ps3-lpm.c
+++ b/drivers/ps3/ps3-lpm.c
@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/uaccess.h>
+#include <asm/time.h>
#include <asm/ps3.h>
#include <asm/lv1call.h>
#include <asm/cell-pmu.h>
diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c
index 7605453..f17513d 100644
--- a/drivers/ps3/ps3-sys-manager.c
+++ b/drivers/ps3/ps3-sys-manager.c
@@ -184,10 +184,7 @@
/**
* enum ps3_sys_manager_wake_source - Next-op wakeup source (bit position mask).
- * @PS3_SM_WAKE_DEFAULT: Disk insert, power button, eject button, IR
- * controller, and bluetooth controller.
- * @PS3_SM_WAKE_RTC:
- * @PS3_SM_WAKE_RTC_ERROR:
+ * @PS3_SM_WAKE_DEFAULT: Disk insert, power button, eject button.
* @PS3_SM_WAKE_W_O_L: Ether or wireless LAN.
* @PS3_SM_WAKE_P_O_R: Power on reset.
*
@@ -200,8 +197,6 @@
enum ps3_sys_manager_wake_source {
/* version 3 */
PS3_SM_WAKE_DEFAULT = 0,
- PS3_SM_WAKE_RTC = 0x00000040,
- PS3_SM_WAKE_RTC_ERROR = 0x00000080,
PS3_SM_WAKE_W_O_L = 0x00000400,
PS3_SM_WAKE_P_O_R = 0x80000000,
};
diff --git a/drivers/rtc/rtc-ds1511.c b/drivers/rtc/rtc-ds1511.c
index a83a40b..0f0d27d 100644
--- a/drivers/rtc/rtc-ds1511.c
+++ b/drivers/rtc/rtc-ds1511.c
@@ -184,7 +184,7 @@
static int ds1511_rtc_set_time(struct device *dev, struct rtc_time *rtc_tm)
{
u8 mon, day, dow, hrs, min, sec, yrs, cen;
- unsigned int flags;
+ unsigned long flags;
/*
* won't have to change this for a while
@@ -247,7 +247,7 @@
static int ds1511_rtc_read_time(struct device *dev, struct rtc_time *rtc_tm)
{
unsigned int century;
- unsigned int flags;
+ unsigned long flags;
spin_lock_irqsave(&ds1511_lock, flags);
rtc_disable_update();
diff --git a/drivers/rtc/rtc-lib.c b/drivers/rtc/rtc-lib.c
index ba795a4..9f996ec 100644
--- a/drivers/rtc/rtc-lib.c
+++ b/drivers/rtc/rtc-lib.c
@@ -51,7 +51,7 @@
*/
void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
{
- register int days, month, year;
+ unsigned int days, month, year;
days = time / 86400;
time -= days * 86400;
diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index 316bfaa..a3e0880 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/i2c.h>
@@ -803,6 +804,7 @@
#ifdef CONFIG_RTC_DRV_M41T80_WDT
if (clientdata->features & M41T80_FEATURE_HT) {
+ save_client = client;
rc = misc_register(&wdt_dev);
if (rc)
goto exit;
@@ -811,7 +813,6 @@
misc_deregister(&wdt_dev);
goto exit;
}
- save_client = client;
}
#endif
return 0;
diff --git a/drivers/rtc/rtc-s35390a.c b/drivers/rtc/rtc-s35390a.c
index 29f47ba..a6fa1f2 100644
--- a/drivers/rtc/rtc-s35390a.c
+++ b/drivers/rtc/rtc-s35390a.c
@@ -227,7 +227,7 @@
/* This chip uses multiple addresses, use dummy devices for them */
for (i = 1; i < 8; ++i) {
s35390a->client[i] = i2c_new_dummy(client->adapter,
- client->addr + i, "rtc-s35390a");
+ client->addr + i);
if (!s35390a->client[i]) {
dev_err(&client->dev, "Address %02x unavailable\n",
client->addr + i);
diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index 110699b..1f88e9e 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -616,7 +616,7 @@
goto err_badres;
}
- rtc->regbase = (void __iomem *)rtc->res->start;
+ rtc->regbase = ioremap_nocache(rtc->res->start, rtc->regsize);
if (unlikely(!rtc->regbase)) {
ret = -EINVAL;
goto err_badmap;
@@ -626,7 +626,7 @@
&sh_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc->rtc_dev)) {
ret = PTR_ERR(rtc->rtc_dev);
- goto err_badmap;
+ goto err_unmap;
}
rtc->capabilities = RTC_DEF_CAPABILITIES;
@@ -653,7 +653,7 @@
dev_err(&pdev->dev,
"request period IRQ failed with %d, IRQ %d\n", ret,
rtc->periodic_irq);
- goto err_badmap;
+ goto err_unmap;
}
ret = request_irq(rtc->carry_irq, sh_rtc_interrupt, IRQF_DISABLED,
@@ -663,7 +663,7 @@
"request carry IRQ failed with %d, IRQ %d\n", ret,
rtc->carry_irq);
free_irq(rtc->periodic_irq, rtc);
- goto err_badmap;
+ goto err_unmap;
}
ret = request_irq(rtc->alarm_irq, sh_rtc_alarm, IRQF_DISABLED,
@@ -674,7 +674,7 @@
rtc->alarm_irq);
free_irq(rtc->carry_irq, rtc);
free_irq(rtc->periodic_irq, rtc);
- goto err_badmap;
+ goto err_unmap;
}
tmp = readb(rtc->regbase + RCR1);
@@ -684,6 +684,8 @@
return 0;
+err_unmap:
+ iounmap(rtc->regbase);
err_badmap:
release_resource(rtc->res);
err_badres:
@@ -708,6 +710,8 @@
release_resource(rtc->res);
+ iounmap(rtc->regbase);
+
platform_set_drvdata(pdev, NULL);
kfree(rtc);
diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c
index c1f2ade..5043150 100644
--- a/drivers/s390/char/tty3270.c
+++ b/drivers/s390/char/tty3270.c
@@ -965,8 +965,7 @@
* Insert character into the screen at the current position with the
* current color and highlight. This function does NOT do cursor movement.
*/
-static int
-tty3270_put_character(struct tty3270 *tp, char ch)
+static void tty3270_put_character(struct tty3270 *tp, char ch)
{
struct tty3270_line *line;
struct tty3270_cell *cell;
@@ -986,7 +985,6 @@
cell->character = tp->view.ascebc[(unsigned int) ch];
cell->highlight = tp->highlight;
cell->f_color = tp->f_color;
- return 1;
}
/*
@@ -1612,16 +1610,15 @@
/*
* Put single characters to the ttys character buffer
*/
-static void
-tty3270_put_char(struct tty_struct *tty, unsigned char ch)
+static int tty3270_put_char(struct tty_struct *tty, unsigned char ch)
{
struct tty3270 *tp;
tp = tty->driver_data;
- if (!tp)
- return;
- if (tp->char_count < TTY3270_CHAR_BUF_SIZE)
- tp->char_buf[tp->char_count++] = ch;
+ if (!tp || tp->char_count >= TTY3270_CHAR_BUF_SIZE)
+ return 0;
+ tp->char_buf[tp->char_count++] = ch;
+ return 1;
}
/*
diff --git a/drivers/s390/cio/blacklist.c b/drivers/s390/cio/blacklist.c
index 40ef948..9c21b8f 100644
--- a/drivers/s390/cio/blacklist.c
+++ b/drivers/s390/cio/blacklist.c
@@ -19,6 +19,7 @@
#include <asm/cio.h>
#include <asm/uaccess.h>
+#include <asm/cio.h>
#include "blacklist.h"
#include "cio.h"
@@ -43,164 +44,169 @@
* Function: blacklist_range
* (Un-)blacklist the devices from-to
*/
-static void
-blacklist_range (range_action action, unsigned int from, unsigned int to,
- unsigned int ssid)
+static int blacklist_range(range_action action, unsigned int from_ssid,
+ unsigned int to_ssid, unsigned int from,
+ unsigned int to, int msgtrigger)
{
- if (!to)
- to = from;
-
- if (from > to || to > __MAX_SUBCHANNEL || ssid > __MAX_SSID) {
- printk (KERN_WARNING "cio: Invalid blacklist range "
- "0.%x.%04x to 0.%x.%04x, skipping\n",
- ssid, from, ssid, to);
- return;
+ if ((from_ssid > to_ssid) || ((from_ssid == to_ssid) && (from > to))) {
+ if (msgtrigger)
+ printk(KERN_WARNING "cio: Invalid cio_ignore range "
+ "0.%x.%04x-0.%x.%04x\n", from_ssid, from,
+ to_ssid, to);
+ return 1;
}
- for (; from <= to; from++) {
+
+ while ((from_ssid < to_ssid) || ((from_ssid == to_ssid) &&
+ (from <= to))) {
if (action == add)
- set_bit (from, bl_dev[ssid]);
+ set_bit(from, bl_dev[from_ssid]);
else
- clear_bit (from, bl_dev[ssid]);
+ clear_bit(from, bl_dev[from_ssid]);
+ from++;
+ if (from > __MAX_SUBCHANNEL) {
+ from_ssid++;
+ from = 0;
+ }
}
-}
-/*
- * Function: blacklist_busid
- * Get devno/busid from given string.
- * Shamelessly grabbed from dasd_devmap.c.
- */
-static int
-blacklist_busid(char **str, int *id0, int *ssid, int *devno)
-{
- int val, old_style;
- char *sav;
-
- sav = *str;
-
- /* check for leading '0x' */
- old_style = 0;
- if ((*str)[0] == '0' && (*str)[1] == 'x') {
- *str += 2;
- old_style = 1;
- }
- if (!isxdigit((*str)[0])) /* We require at least one hex digit */
- goto confused;
- val = simple_strtoul(*str, str, 16);
- if (old_style || (*str)[0] != '.') {
- *id0 = *ssid = 0;
- if (val < 0 || val > 0xffff)
- goto confused;
- *devno = val;
- if ((*str)[0] != ',' && (*str)[0] != '-' &&
- (*str)[0] != '\n' && (*str)[0] != '\0')
- goto confused;
- return 0;
- }
- /* New style x.y.z busid */
- if (val < 0 || val > 0xff)
- goto confused;
- *id0 = val;
- (*str)++;
- if (!isxdigit((*str)[0])) /* We require at least one hex digit */
- goto confused;
- val = simple_strtoul(*str, str, 16);
- if (val < 0 || val > 0xff || (*str)++[0] != '.')
- goto confused;
- *ssid = val;
- if (!isxdigit((*str)[0])) /* We require at least one hex digit */
- goto confused;
- val = simple_strtoul(*str, str, 16);
- if (val < 0 || val > 0xffff)
- goto confused;
- *devno = val;
- if ((*str)[0] != ',' && (*str)[0] != '-' &&
- (*str)[0] != '\n' && (*str)[0] != '\0')
- goto confused;
return 0;
-confused:
- strsep(str, ",\n");
- printk(KERN_WARNING "cio: Invalid cio_ignore parameter '%s'\n", sav);
- return 1;
}
-static int
-blacklist_parse_parameters (char *str, range_action action)
+static int pure_hex(char **cp, unsigned int *val, int min_digit,
+ int max_digit, int max_val)
{
- int from, to, from_id0, to_id0, from_ssid, to_ssid;
+ int diff;
+ unsigned int value;
- while (*str != 0 && *str != '\n') {
- range_action ra = action;
- while(*str == ',')
- str++;
- if (*str == '!') {
- ra = !action;
- ++str;
- }
+ diff = 0;
+ *val = 0;
- /*
- * Since we have to parse the proc commands and the
- * kernel arguments we have to check four cases
- */
- if (strncmp(str,"all,",4) == 0 || strcmp(str,"all") == 0 ||
- strncmp(str,"all\n",4) == 0 || strncmp(str,"all ",4) == 0) {
- int j;
+ while (isxdigit(**cp) && (diff <= max_digit)) {
- str += 3;
- for (j=0; j <= __MAX_SSID; j++)
- blacklist_range(ra, 0, __MAX_SUBCHANNEL, j);
- } else {
- int rc;
-
- rc = blacklist_busid(&str, &from_id0,
- &from_ssid, &from);
- if (rc)
- continue;
- to = from;
- to_id0 = from_id0;
- to_ssid = from_ssid;
- if (*str == '-') {
- str++;
- rc = blacklist_busid(&str, &to_id0,
- &to_ssid, &to);
- if (rc)
- continue;
- }
- if (*str == '-') {
- printk(KERN_WARNING "cio: invalid cio_ignore "
- "parameter '%s'\n",
- strsep(&str, ",\n"));
- continue;
- }
- if ((from_id0 != to_id0) ||
- (from_ssid != to_ssid)) {
- printk(KERN_WARNING "cio: invalid cio_ignore "
- "range %x.%x.%04x-%x.%x.%04x\n",
- from_id0, from_ssid, from,
- to_id0, to_ssid, to);
- continue;
- }
- blacklist_range (ra, from, to, to_ssid);
- }
+ if (isdigit(**cp))
+ value = **cp - '0';
+ else
+ value = tolower(**cp) - 'a' + 10;
+ *val = *val * 16 + value;
+ (*cp)++;
+ diff++;
}
- return 1;
+
+ if ((diff < min_digit) || (diff > max_digit) || (*val > max_val))
+ return 1;
+
+ return 0;
}
-/* Parsing the commandline for blacklist parameters, e.g. to blacklist
- * bus ids 0.0.1234, 0.0.1235 and 0.0.1236, you could use any of:
- * - cio_ignore=1234-1236
- * - cio_ignore=0x1234-0x1235,1236
- * - cio_ignore=0x1234,1235-1236
- * - cio_ignore=1236 cio_ignore=1234-0x1236
- * - cio_ignore=1234 cio_ignore=1236 cio_ignore=0x1235
- * - cio_ignore=0.0.1234-0.0.1236
- * - cio_ignore=0.0.1234,0x1235,1236
- * - ...
- */
+static int parse_busid(char *str, int *cssid, int *ssid, int *devno,
+ int msgtrigger)
+{
+ char *str_work;
+ int val, rc, ret;
+
+ rc = 1;
+
+ if (*str == '\0')
+ goto out;
+
+ /* old style */
+ str_work = str;
+ val = simple_strtoul(str, &str_work, 16);
+
+ if (*str_work == '\0') {
+ if (val <= __MAX_SUBCHANNEL) {
+ *devno = val;
+ *ssid = 0;
+ *cssid = 0;
+ rc = 0;
+ }
+ goto out;
+ }
+
+ /* new style */
+ str_work = str;
+ ret = pure_hex(&str_work, cssid, 1, 2, __MAX_CSSID);
+ if (ret || (str_work[0] != '.'))
+ goto out;
+ str_work++;
+ ret = pure_hex(&str_work, ssid, 1, 1, __MAX_SSID);
+ if (ret || (str_work[0] != '.'))
+ goto out;
+ str_work++;
+ ret = pure_hex(&str_work, devno, 4, 4, __MAX_SUBCHANNEL);
+ if (ret || (str_work[0] != '\0'))
+ goto out;
+
+ rc = 0;
+out:
+ if (rc && msgtrigger)
+ printk(KERN_WARNING "cio: Invalid cio_ignore device '%s'\n",
+ str);
+
+ return rc;
+}
+
+static int blacklist_parse_parameters(char *str, range_action action,
+ int msgtrigger)
+{
+ int from_cssid, to_cssid, from_ssid, to_ssid, from, to;
+ int rc, totalrc;
+ char *parm;
+ range_action ra;
+
+ totalrc = 0;
+
+ while ((parm = strsep(&str, ","))) {
+ rc = 0;
+ ra = action;
+ if (*parm == '!') {
+ if (ra == add)
+ ra = free;
+ else
+ ra = add;
+ parm++;
+ }
+ if (strcmp(parm, "all") == 0) {
+ from_cssid = 0;
+ from_ssid = 0;
+ from = 0;
+ to_cssid = __MAX_CSSID;
+ to_ssid = __MAX_SSID;
+ to = __MAX_SUBCHANNEL;
+ } else {
+ rc = parse_busid(strsep(&parm, "-"), &from_cssid,
+ &from_ssid, &from, msgtrigger);
+ if (!rc) {
+ if (parm != NULL)
+ rc = parse_busid(parm, &to_cssid,
+ &to_ssid, &to,
+ msgtrigger);
+ else {
+ to_cssid = from_cssid;
+ to_ssid = from_ssid;
+ to = from;
+ }
+ }
+ }
+ if (!rc) {
+ rc = blacklist_range(ra, from_ssid, to_ssid, from, to,
+ msgtrigger);
+ if (rc)
+ totalrc = 1;
+ } else
+ totalrc = 1;
+ }
+
+ return totalrc;
+}
+
static int __init
blacklist_setup (char *str)
{
CIO_MSG_EVENT(6, "Reading blacklist parameters\n");
- return blacklist_parse_parameters (str, add);
+ if (blacklist_parse_parameters(str, add, 1))
+ return 0;
+ return 1;
}
__setup ("cio_ignore=", blacklist_setup);
@@ -224,27 +230,23 @@
* Function: blacklist_parse_proc_parameters
* parse the stuff which is piped to /proc/cio_ignore
*/
-static void
-blacklist_parse_proc_parameters (char *buf)
+static int blacklist_parse_proc_parameters(char *buf)
{
- if (strncmp (buf, "free ", 5) == 0) {
- blacklist_parse_parameters (buf + 5, free);
- } else if (strncmp (buf, "add ", 4) == 0) {
- /*
- * We don't need to check for known devices since
- * css_probe_device will handle this correctly.
- */
- blacklist_parse_parameters (buf + 4, add);
- } else {
- printk (KERN_WARNING "cio: cio_ignore: Parse error; \n"
- KERN_WARNING "try using 'free all|<devno-range>,"
- "<devno-range>,...'\n"
- KERN_WARNING "or 'add <devno-range>,"
- "<devno-range>,...'\n");
- return;
- }
+ int rc;
+ char *parm;
+
+ parm = strsep(&buf, " ");
+
+ if (strcmp("free", parm) == 0)
+ rc = blacklist_parse_parameters(buf, free, 0);
+ else if (strcmp("add", parm) == 0)
+ rc = blacklist_parse_parameters(buf, add, 0);
+ else
+ return 1;
css_schedule_reprobe();
+
+ return rc;
}
/* Iterator struct for all devices. */
@@ -328,6 +330,8 @@
size_t user_len, loff_t *offset)
{
char *buf;
+ size_t i;
+ ssize_t rc, ret;
if (*offset)
return -EINVAL;
@@ -336,16 +340,27 @@
buf = vmalloc (user_len + 1); /* maybe better use the stack? */
if (buf == NULL)
return -ENOMEM;
+ memset(buf, 0, user_len + 1);
+
if (strncpy_from_user (buf, user_buf, user_len) < 0) {
- vfree (buf);
- return -EFAULT;
+ rc = -EFAULT;
+ goto out_free;
}
- buf[user_len] = '\0';
- blacklist_parse_proc_parameters (buf);
+ i = user_len - 1;
+ while ((i >= 0) && (isspace(buf[i]) || (buf[i] == 0))) {
+ buf[i] = '\0';
+ i--;
+ }
+ ret = blacklist_parse_proc_parameters(buf);
+ if (ret)
+ rc = -EINVAL;
+ else
+ rc = user_len;
+out_free:
vfree (buf);
- return user_len;
+ return rc;
}
static const struct seq_operations cio_ignore_proc_seq_ops = {
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index 08a5781..82c6a2d 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -39,23 +39,6 @@
debug_info_t *cio_debug_trace_id;
debug_info_t *cio_debug_crw_id;
-int cio_show_msg;
-
-static int __init
-cio_setup (char *parm)
-{
- if (!strcmp (parm, "yes"))
- cio_show_msg = 1;
- else if (!strcmp (parm, "no"))
- cio_show_msg = 0;
- else
- printk(KERN_ERR "cio: cio_setup: "
- "invalid cio_msg parameter '%s'", parm);
- return 1;
-}
-
-__setup ("cio_msg=", cio_setup);
-
/*
* Function: cio_debug_init
* Initializes three debug logs for common I/O:
@@ -166,7 +149,7 @@
stsch (sch->schid, &sch->schib);
- CIO_MSG_EVENT(0, "cio_start: 'not oper' status for "
+ CIO_MSG_EVENT(2, "cio_start: 'not oper' status for "
"subchannel 0.%x.%04x!\n", sch->schid.ssid,
sch->schid.sch_no);
sprintf(dbf_text, "no%s", sch->dev.bus_id);
@@ -567,10 +550,9 @@
* ... just being curious we check for non I/O subchannels
*/
if (sch->st != 0) {
- CIO_DEBUG(KERN_INFO, 0,
- "Subchannel 0.%x.%04x reports "
- "non-I/O subchannel type %04X\n",
- sch->schid.ssid, sch->schid.sch_no, sch->st);
+ CIO_MSG_EVENT(4, "Subchannel 0.%x.%04x reports "
+ "non-I/O subchannel type %04X\n",
+ sch->schid.ssid, sch->schid.sch_no, sch->st);
/* We stop here for non-io subchannels. */
err = sch->st;
goto out;
@@ -588,7 +570,7 @@
* This device must not be known to Linux. So we simply
* say that there is no device and return ENODEV.
*/
- CIO_MSG_EVENT(4, "Blacklisted device detected "
+ CIO_MSG_EVENT(6, "Blacklisted device detected "
"at devno %04X, subchannel set %x\n",
sch->schib.pmcw.dev, sch->schid.ssid);
err = -ENODEV;
@@ -601,12 +583,11 @@
sch->lpm = sch->schib.pmcw.pam & sch->opm;
sch->isc = 3;
- CIO_DEBUG(KERN_INFO, 0,
- "Detected device %04x on subchannel 0.%x.%04X"
- " - PIM = %02X, PAM = %02X, POM = %02X\n",
- sch->schib.pmcw.dev, sch->schid.ssid,
- sch->schid.sch_no, sch->schib.pmcw.pim,
- sch->schib.pmcw.pam, sch->schib.pmcw.pom);
+ CIO_MSG_EVENT(6, "Detected device %04x on subchannel 0.%x.%04X "
+ "- PIM = %02X, PAM = %02X, POM = %02X\n",
+ sch->schib.pmcw.dev, sch->schid.ssid,
+ sch->schid.sch_no, sch->schib.pmcw.pim,
+ sch->schib.pmcw.pam, sch->schib.pmcw.pom);
/*
* We now have to initially ...
diff --git a/drivers/s390/cio/cio.h b/drivers/s390/cio/cio.h
index 3c75412..6e933ae 100644
--- a/drivers/s390/cio/cio.h
+++ b/drivers/s390/cio/cio.h
@@ -118,6 +118,4 @@
#define cio_get_console_priv() NULL
#endif
-extern int cio_show_msg;
-
#endif
diff --git a/drivers/s390/cio/cio_debug.h b/drivers/s390/cio/cio_debug.h
index d7429ef..e64e827 100644
--- a/drivers/s390/cio/cio_debug.h
+++ b/drivers/s390/cio/cio_debug.h
@@ -31,10 +31,4 @@
}
}
-#define CIO_DEBUG(printk_level, event_level, msg...) do { \
- if (cio_show_msg) \
- printk(printk_level "cio: " msg); \
- CIO_MSG_EVENT(event_level, msg); \
- } while (0)
-
#endif
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 595e327..a769565 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -570,7 +570,7 @@
{
int ret;
- CIO_MSG_EVENT(2, "reprobe start\n");
+ CIO_MSG_EVENT(4, "reprobe start\n");
need_reprobe = 0;
/* Make sure initial subchannel scan is done. */
@@ -578,7 +578,7 @@
atomic_read(&ccw_device_init_count) == 0);
ret = for_each_subchannel_staged(NULL, reprobe_subchannel, NULL);
- CIO_MSG_EVENT(2, "reprobe done (rc=%d, need_reprobe=%d)\n", ret,
+ CIO_MSG_EVENT(4, "reprobe done (rc=%d, need_reprobe=%d)\n", ret,
need_reprobe);
}
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index abfd601..e22813d 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -341,7 +341,7 @@
rc = device_schedule_callback(&cdev->dev,
ccw_device_remove_orphan_cb);
if (rc)
- CIO_MSG_EVENT(2, "Couldn't unregister orphan "
+ CIO_MSG_EVENT(0, "Couldn't unregister orphan "
"0.%x.%04x\n",
cdev->private->dev_id.ssid,
cdev->private->dev_id.devno);
@@ -351,7 +351,7 @@
rc = device_schedule_callback(cdev->dev.parent,
ccw_device_remove_sch_cb);
if (rc)
- CIO_MSG_EVENT(2, "Couldn't unregister disconnected device "
+ CIO_MSG_EVENT(0, "Couldn't unregister disconnected device "
"0.%x.%04x\n",
cdev->private->dev_id.ssid,
cdev->private->dev_id.devno);
@@ -397,7 +397,7 @@
if (ret == 0)
wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev));
else {
- CIO_MSG_EVENT(2, "ccw_device_offline returned %d, "
+ CIO_MSG_EVENT(0, "ccw_device_offline returned %d, "
"device 0.%x.%04x\n",
ret, cdev->private->dev_id.ssid,
cdev->private->dev_id.devno);
@@ -433,7 +433,7 @@
if (ret == 0)
wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev));
else {
- CIO_MSG_EVENT(2, "ccw_device_online returned %d, "
+ CIO_MSG_EVENT(0, "ccw_device_online returned %d, "
"device 0.%x.%04x\n",
ret, cdev->private->dev_id.ssid,
cdev->private->dev_id.devno);
@@ -451,7 +451,7 @@
if (ret == 0)
wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev));
else
- CIO_MSG_EVENT(2, "ccw_device_offline returned %d, "
+ CIO_MSG_EVENT(0, "ccw_device_offline returned %d, "
"device 0.%x.%04x\n",
ret, cdev->private->dev_id.ssid,
cdev->private->dev_id.devno);
@@ -803,7 +803,7 @@
other_sch = to_subchannel(get_device(cdev->dev.parent));
ret = device_move(&cdev->dev, &sch->dev);
if (ret) {
- CIO_MSG_EVENT(2, "Moving disconnected device 0.%x.%04x failed "
+ CIO_MSG_EVENT(0, "Moving disconnected device 0.%x.%04x failed "
"(ret=%d)!\n", cdev->private->dev_id.ssid,
cdev->private->dev_id.devno, ret);
put_device(&other_sch->dev);
@@ -933,7 +933,7 @@
ret = device_reprobe(&cdev->dev);
if (ret)
/* We can't do much here. */
- CIO_MSG_EVENT(2, "device_reprobe() returned"
+ CIO_MSG_EVENT(0, "device_reprobe() returned"
" %d for 0.%x.%04x\n", ret,
cdev->private->dev_id.ssid,
cdev->private->dev_id.devno);
@@ -1086,7 +1086,7 @@
rc = device_move(&cdev->dev, &sch->dev);
mutex_unlock(&sch->reg_mutex);
if (rc) {
- CIO_MSG_EVENT(2, "Moving device 0.%x.%04x to subchannel "
+ CIO_MSG_EVENT(0, "Moving device 0.%x.%04x to subchannel "
"0.%x.%04x failed (ret=%d)!\n",
cdev->private->dev_id.ssid,
cdev->private->dev_id.devno, sch->schid.ssid,
@@ -1446,8 +1446,7 @@
wait_event(cdev->private->wait_q,
dev_fsm_final_state(cdev));
else
- //FIXME: we can't fail!
- CIO_MSG_EVENT(2, "ccw_device_offline returned %d, "
+ CIO_MSG_EVENT(0, "ccw_device_offline returned %d, "
"device 0.%x.%04x\n",
ret, cdev->private->dev_id.ssid,
cdev->private->dev_id.devno);
@@ -1524,7 +1523,7 @@
spin_lock_irq(cdev->ccwlock);
switch (cdev->private->state) {
case DEV_STATE_DISCONNECTED:
- CIO_MSG_EVENT(3, "recovery: trigger 0.%x.%04x\n",
+ CIO_MSG_EVENT(4, "recovery: trigger 0.%x.%04x\n",
cdev->private->dev_id.ssid,
cdev->private->dev_id.devno);
dev_fsm_event(cdev, DEV_EVENT_VERIFY);
@@ -1554,7 +1553,7 @@
}
spin_unlock_irq(&recovery_lock);
} else
- CIO_MSG_EVENT(2, "recovery: end\n");
+ CIO_MSG_EVENT(4, "recovery: end\n");
}
static DECLARE_WORK(recovery_work, recovery_work_func);
@@ -1572,7 +1571,7 @@
{
unsigned long flags;
- CIO_MSG_EVENT(2, "recovery: schedule\n");
+ CIO_MSG_EVENT(4, "recovery: schedule\n");
spin_lock_irqsave(&recovery_lock, flags);
if (!timer_pending(&recovery_timer) || (recovery_phase != 0)) {
recovery_phase = 0;
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index 99403b0..e268d5a 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -322,10 +322,10 @@
same_dev = 0; /* Keep the compiler quiet... */
switch (state) {
case DEV_STATE_NOT_OPER:
- CIO_DEBUG(KERN_WARNING, 2,
- "SenseID : unknown device %04x on subchannel "
- "0.%x.%04x\n", cdev->private->dev_id.devno,
- sch->schid.ssid, sch->schid.sch_no);
+ CIO_MSG_EVENT(2, "SenseID : unknown device %04x on "
+ "subchannel 0.%x.%04x\n",
+ cdev->private->dev_id.devno,
+ sch->schid.ssid, sch->schid.sch_no);
break;
case DEV_STATE_OFFLINE:
if (cdev->private->state == DEV_STATE_DISCONNECTED_SENSE_ID) {
@@ -348,20 +348,19 @@
return;
}
/* Issue device info message. */
- CIO_DEBUG(KERN_INFO, 2,
- "SenseID : device 0.%x.%04x reports: "
- "CU Type/Mod = %04X/%02X, Dev Type/Mod = "
- "%04X/%02X\n",
- cdev->private->dev_id.ssid,
- cdev->private->dev_id.devno,
- cdev->id.cu_type, cdev->id.cu_model,
- cdev->id.dev_type, cdev->id.dev_model);
+ CIO_MSG_EVENT(4, "SenseID : device 0.%x.%04x reports: "
+ "CU Type/Mod = %04X/%02X, Dev Type/Mod = "
+ "%04X/%02X\n",
+ cdev->private->dev_id.ssid,
+ cdev->private->dev_id.devno,
+ cdev->id.cu_type, cdev->id.cu_model,
+ cdev->id.dev_type, cdev->id.dev_model);
break;
case DEV_STATE_BOXED:
- CIO_DEBUG(KERN_WARNING, 2,
- "SenseID : boxed device %04x on subchannel "
- "0.%x.%04x\n", cdev->private->dev_id.devno,
- sch->schid.ssid, sch->schid.sch_no);
+ CIO_MSG_EVENT(0, "SenseID : boxed device %04x on "
+ " subchannel 0.%x.%04x\n",
+ cdev->private->dev_id.devno,
+ sch->schid.ssid, sch->schid.sch_no);
break;
}
cdev->private->state = state;
@@ -443,9 +442,8 @@
if (state == DEV_STATE_BOXED)
- CIO_DEBUG(KERN_WARNING, 2,
- "Boxed device %04x on subchannel %04x\n",
- cdev->private->dev_id.devno, sch->schid.sch_no);
+ CIO_MSG_EVENT(0, "Boxed device %04x on subchannel %04x\n",
+ cdev->private->dev_id.devno, sch->schid.sch_no);
if (cdev->private->flags.donotify) {
cdev->private->flags.donotify = 0;
@@ -900,7 +898,7 @@
/* Basic sense hasn't started. Try again. */
ccw_device_do_sense(cdev, irb);
else {
- CIO_MSG_EVENT(2, "Huh? 0.%x.%04x: unsolicited "
+ CIO_MSG_EVENT(0, "0.%x.%04x: unsolicited "
"interrupt during w4sense...\n",
cdev->private->dev_id.ssid,
cdev->private->dev_id.devno);
@@ -1169,8 +1167,10 @@
static void
ccw_device_bug(struct ccw_device *cdev, enum dev_event dev_event)
{
- CIO_MSG_EVENT(0, "dev_jumptable[%i][%i] == NULL\n",
- cdev->private->state, dev_event);
+ CIO_MSG_EVENT(0, "Internal state [%i][%i] not handled for device "
+ "0.%x.%04x\n", cdev->private->state, dev_event,
+ cdev->private->dev_id.ssid,
+ cdev->private->dev_id.devno);
BUG();
}
diff --git a/drivers/s390/cio/device_id.c b/drivers/s390/cio/device_id.c
index dc4d87f..cba70205 100644
--- a/drivers/s390/cio/device_id.c
+++ b/drivers/s390/cio/device_id.c
@@ -214,7 +214,7 @@
* sense id information. So, for intervention required,
* we use the "whack it until it talks" strategy...
*/
- CIO_MSG_EVENT(2, "SenseID : device %04x on Subchannel "
+ CIO_MSG_EVENT(0, "SenseID : device %04x on Subchannel "
"0.%x.%04x reports cmd reject\n",
cdev->private->dev_id.devno, sch->schid.ssid,
sch->schid.sch_no);
@@ -239,7 +239,7 @@
lpm = to_io_private(sch)->orb.lpm;
if ((lpm & sch->schib.pmcw.pim & sch->schib.pmcw.pam) != 0)
- CIO_MSG_EVENT(2, "SenseID : path %02X for device %04x "
+ CIO_MSG_EVENT(4, "SenseID : path %02X for device %04x "
"on subchannel 0.%x.%04x is "
"'not operational'\n", lpm,
cdev->private->dev_id.devno,
diff --git a/drivers/s390/cio/device_pgid.c b/drivers/s390/cio/device_pgid.c
index c52449a1..ba55905 100644
--- a/drivers/s390/cio/device_pgid.c
+++ b/drivers/s390/cio/device_pgid.c
@@ -79,7 +79,7 @@
/* ret is 0, -EBUSY, -EACCES or -ENODEV */
if (ret != -EACCES)
return ret;
- CIO_MSG_EVENT(2, "SNID - Device %04x on Subchannel "
+ CIO_MSG_EVENT(3, "SNID - Device %04x on Subchannel "
"0.%x.%04x, lpm %02X, became 'not "
"operational'\n",
cdev->private->dev_id.devno,
@@ -159,7 +159,7 @@
u8 lpm;
lpm = to_io_private(sch)->orb.lpm;
- CIO_MSG_EVENT(2, "SNID - Device %04x on Subchannel 0.%x.%04x,"
+ CIO_MSG_EVENT(3, "SNID - Device %04x on Subchannel 0.%x.%04x,"
" lpm %02X, became 'not operational'\n",
cdev->private->dev_id.devno, sch->schid.ssid,
sch->schid.sch_no, lpm);
@@ -275,7 +275,7 @@
return ret;
}
/* PGID command failed on this path. */
- CIO_MSG_EVENT(2, "SPID - Device %04x on Subchannel "
+ CIO_MSG_EVENT(3, "SPID - Device %04x on Subchannel "
"0.%x.%04x, lpm %02X, became 'not operational'\n",
cdev->private->dev_id.devno, sch->schid.ssid,
sch->schid.sch_no, cdev->private->imask);
@@ -317,7 +317,7 @@
return ret;
}
/* nop command failed on this path. */
- CIO_MSG_EVENT(2, "NOP - Device %04x on Subchannel "
+ CIO_MSG_EVENT(3, "NOP - Device %04x on Subchannel "
"0.%x.%04x, lpm %02X, became 'not operational'\n",
cdev->private->dev_id.devno, sch->schid.ssid,
sch->schid.sch_no, cdev->private->imask);
@@ -362,7 +362,7 @@
return -EAGAIN;
}
if (irb->scsw.cc == 3) {
- CIO_MSG_EVENT(2, "SPID - Device %04x on Subchannel 0.%x.%04x,"
+ CIO_MSG_EVENT(3, "SPID - Device %04x on Subchannel 0.%x.%04x,"
" lpm %02X, became 'not operational'\n",
cdev->private->dev_id.devno, sch->schid.ssid,
sch->schid.sch_no, cdev->private->imask);
@@ -391,7 +391,7 @@
return -ETIME;
}
if (irb->scsw.cc == 3) {
- CIO_MSG_EVENT(2, "NOP - Device %04x on Subchannel 0.%x.%04x,"
+ CIO_MSG_EVENT(3, "NOP - Device %04x on Subchannel 0.%x.%04x,"
" lpm %02X, became 'not operational'\n",
cdev->private->dev_id.devno, sch->schid.ssid,
sch->schid.sch_no, cdev->private->imask);
diff --git a/drivers/s390/s390mach.c b/drivers/s390/s390mach.c
index 4d4b542..5080f34 100644
--- a/drivers/s390/s390mach.c
+++ b/drivers/s390/s390mach.c
@@ -48,10 +48,11 @@
int ccode;
struct semaphore *sem;
unsigned int chain;
+ int ignore;
sem = (struct semaphore *)param;
repeat:
- down_interruptible(sem);
+ ignore = down_interruptible(sem);
chain = 0;
while (1) {
if (unlikely(chain > 1)) {
diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c
index 37b85c6..c8bad67 100644
--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -1055,7 +1055,7 @@
rec->scsi_result = scsi_cmnd->result;
rec->scsi_cmnd = (unsigned long)scsi_cmnd;
rec->scsi_serial = scsi_cmnd->serial_number;
- memcpy(rec->scsi_opcode, &scsi_cmnd->cmnd,
+ memcpy(rec->scsi_opcode, scsi_cmnd->cmnd,
min((int)scsi_cmnd->cmd_len,
ZFCP_DBF_SCSI_OPCODE));
rec->scsi_retries = scsi_cmnd->retries;
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 9af2330..b2ea4ea 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -4014,7 +4014,7 @@
ZFCP_LOG_TRACE("scpnt->result =0x%x, command was:\n",
scpnt->result);
ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE,
- (void *) &scpnt->cmnd, scpnt->cmd_len);
+ scpnt->cmnd, scpnt->cmd_len);
ZFCP_LOG_TRACE("%i bytes sense data provided by FCP\n",
fcp_rsp_iu->fcp_sns_len);
diff --git a/drivers/sbus/char/bpp.c b/drivers/sbus/char/bpp.c
index 4fab0c2..b87037e 100644
--- a/drivers/sbus/char/bpp.c
+++ b/drivers/sbus/char/bpp.c
@@ -41,7 +41,7 @@
#define BPP_DELAY 100
static const unsigned BPP_MAJOR = LP_MAJOR;
-static const char* dev_name = "bpp";
+static const char *bpp_dev_name = "bpp";
/* When switching from compatibility to a mode where I can read, try
the following mode first. */
diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index f4c4fe90..f5a9add 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -599,7 +599,7 @@
(struct NCR_700_command_slot *)SCp->host_scribble;
dma_unmap_single(hostdata->dev, slot->pCmd,
- sizeof(SCp->cmnd), DMA_TO_DEVICE);
+ MAX_COMMAND_SIZE, DMA_TO_DEVICE);
if (slot->flags == NCR_700_FLAG_AUTOSENSE) {
char *cmnd = NCR_700_get_sense_cmnd(SCp->device);
#ifdef NCR_700_DEBUG
@@ -1004,7 +1004,7 @@
* here */
NCR_700_unmap(hostdata, SCp, slot);
dma_unmap_single(hostdata->dev, slot->pCmd,
- sizeof(SCp->cmnd),
+ MAX_COMMAND_SIZE,
DMA_TO_DEVICE);
cmnd[0] = REQUEST_SENSE;
@@ -1901,7 +1901,7 @@
}
slot->resume_offset = 0;
slot->pCmd = dma_map_single(hostdata->dev, SCp->cmnd,
- sizeof(SCp->cmnd), DMA_TO_DEVICE);
+ MAX_COMMAND_SIZE, DMA_TO_DEVICE);
NCR_700_start_command(SCp);
return 0;
}
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 99c57b0..81ccbd7 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -504,10 +504,9 @@
source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
source "drivers/scsi/aic94xx/Kconfig"
-# All the I2O code and drivers do not seem to be 64bit safe.
config SCSI_DPT_I2O
tristate "Adaptec I2O RAID support "
- depends on !64BIT && SCSI && PCI && VIRT_TO_BUS
+ depends on SCSI && PCI && VIRT_TO_BUS
help
This driver supports all of Adaptec's I2O based RAID controllers as
well as the DPT SmartRaid V cards. This is an Adaptec maintained
@@ -1680,6 +1679,7 @@
config SCSI_MAC_ESP
tristate "Macintosh NCR53c9[46] SCSI"
depends on MAC && SCSI
+ select SCSI_SPI_ATTRS
help
This is the NCR 53c9x SCSI controller found on most of the 68040
based Macintoshes.
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index 792b2e8..ced3eeb 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -895,7 +895,7 @@
} else {
scb->tag_msg = 0; /* No tag support */
}
- memcpy(&scb->cdb[0], &cmd->cmnd, scb->cdb_len);
+ memcpy(scb->cdb, cmd->cmnd, scb->cdb_len);
}
/**
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 460d402..aa4e77c 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -498,6 +498,11 @@
(le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) &&
(le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) {
fsa_dev_ptr->valid = 1;
+ /* sense_key holds the current state of the spin-up */
+ if (dresp->mnt[0].state & cpu_to_le32(FSCS_NOT_READY))
+ fsa_dev_ptr->sense_data.sense_key = NOT_READY;
+ else if (fsa_dev_ptr->sense_data.sense_key == NOT_READY)
+ fsa_dev_ptr->sense_data.sense_key = NO_SENSE;
fsa_dev_ptr->type = le32_to_cpu(dresp->mnt[0].vol);
fsa_dev_ptr->size
= ((u64)le32_to_cpu(dresp->mnt[0].capacity)) +
@@ -1509,20 +1514,35 @@
scsi_dma_unmap(scsicmd);
readreply = (struct aac_read_reply *)fib_data(fibptr);
- if (le32_to_cpu(readreply->status) == ST_OK)
- scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
- else {
+ switch (le32_to_cpu(readreply->status)) {
+ case ST_OK:
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+ SAM_STAT_GOOD;
+ dev->fsa_dev[cid].sense_data.sense_key = NO_SENSE;
+ break;
+ case ST_NOT_READY:
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+ SAM_STAT_CHECK_CONDITION;
+ set_sense(&dev->fsa_dev[cid].sense_data, NOT_READY,
+ SENCODE_BECOMING_READY, ASENCODE_BECOMING_READY, 0, 0);
+ memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
+ min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
+ SCSI_SENSE_BUFFERSIZE));
+ break;
+ default:
#ifdef AAC_DETAILED_STATUS_INFO
printk(KERN_WARNING "io_callback: io failed, status = %d\n",
le32_to_cpu(readreply->status));
#endif
- scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+ SAM_STAT_CHECK_CONDITION;
set_sense(&dev->fsa_dev[cid].sense_data,
HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
SCSI_SENSE_BUFFERSIZE));
+ break;
}
aac_fib_complete(fibptr);
aac_fib_free(fibptr);
@@ -1863,6 +1883,84 @@
return SCSI_MLQUEUE_HOST_BUSY;
}
+static void aac_start_stop_callback(void *context, struct fib *fibptr)
+{
+ struct scsi_cmnd *scsicmd = context;
+
+ if (!aac_valid_context(scsicmd, fibptr))
+ return;
+
+ BUG_ON(fibptr == NULL);
+
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+
+ aac_fib_complete(fibptr);
+ aac_fib_free(fibptr);
+ scsicmd->scsi_done(scsicmd);
+}
+
+static int aac_start_stop(struct scsi_cmnd *scsicmd)
+{
+ int status;
+ struct fib *cmd_fibcontext;
+ struct aac_power_management *pmcmd;
+ struct scsi_device *sdev = scsicmd->device;
+ struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
+
+ if (!(aac->supplement_adapter_info.SupportedOptions2 &
+ AAC_OPTION_POWER_MANAGEMENT)) {
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+ SAM_STAT_GOOD;
+ scsicmd->scsi_done(scsicmd);
+ return 0;
+ }
+
+ if (aac->in_reset)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ /*
+ * Allocate and initialize a Fib
+ */
+ cmd_fibcontext = aac_fib_alloc(aac);
+ if (!cmd_fibcontext)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ aac_fib_init(cmd_fibcontext);
+
+ pmcmd = fib_data(cmd_fibcontext);
+ pmcmd->command = cpu_to_le32(VM_ContainerConfig);
+ pmcmd->type = cpu_to_le32(CT_POWER_MANAGEMENT);
+ /* Eject bit ignored, not relevant */
+ pmcmd->sub = (scsicmd->cmnd[4] & 1) ?
+ cpu_to_le32(CT_PM_START_UNIT) : cpu_to_le32(CT_PM_STOP_UNIT);
+ pmcmd->cid = cpu_to_le32(sdev_id(sdev));
+ pmcmd->parm = (scsicmd->cmnd[1] & 1) ?
+ cpu_to_le32(CT_PM_UNIT_IMMEDIATE) : 0;
+
+ /*
+ * Now send the Fib to the adapter
+ */
+ status = aac_fib_send(ContainerCommand,
+ cmd_fibcontext,
+ sizeof(struct aac_power_management),
+ FsaNormal,
+ 0, 1,
+ (fib_callback)aac_start_stop_callback,
+ (void *)scsicmd);
+
+ /*
+ * Check that the command queued to the controller
+ */
+ if (status == -EINPROGRESS) {
+ scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
+ return 0;
+ }
+
+ aac_fib_complete(cmd_fibcontext);
+ aac_fib_free(cmd_fibcontext);
+ return SCSI_MLQUEUE_HOST_BUSY;
+}
+
/**
* aac_scsi_cmd() - Process SCSI command
* @scsicmd: SCSI command block
@@ -1899,7 +1997,9 @@
* If the target container doesn't exist, it may have
* been newly created
*/
- if ((fsa_dev_ptr[cid].valid & 1) == 0) {
+ if (((fsa_dev_ptr[cid].valid & 1) == 0) ||
+ (fsa_dev_ptr[cid].sense_data.sense_key ==
+ NOT_READY)) {
switch (scsicmd->cmnd[0]) {
case SERVICE_ACTION_IN:
if (!(dev->raw_io_interface) ||
@@ -2091,8 +2191,8 @@
scsi_sg_copy_from_buffer(scsicmd, cp, sizeof(cp));
/* Do not cache partition table for arrays */
scsicmd->device->removable = 1;
-
- scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+ SAM_STAT_GOOD;
scsicmd->scsi_done(scsicmd);
return 0;
@@ -2187,15 +2287,32 @@
* These commands are all No-Ops
*/
case TEST_UNIT_READY:
+ if (fsa_dev_ptr[cid].sense_data.sense_key == NOT_READY) {
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+ SAM_STAT_CHECK_CONDITION;
+ set_sense(&dev->fsa_dev[cid].sense_data,
+ NOT_READY, SENCODE_BECOMING_READY,
+ ASENCODE_BECOMING_READY, 0, 0);
+ memcpy(scsicmd->sense_buffer,
+ &dev->fsa_dev[cid].sense_data,
+ min_t(size_t,
+ sizeof(dev->fsa_dev[cid].sense_data),
+ SCSI_SENSE_BUFFERSIZE));
+ scsicmd->scsi_done(scsicmd);
+ return 0;
+ }
+ /* FALLTHRU */
case RESERVE:
case RELEASE:
case REZERO_UNIT:
case REASSIGN_BLOCKS:
case SEEK_10:
- case START_STOP:
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
scsicmd->scsi_done(scsicmd);
return 0;
+
+ case START_STOP:
+ return aac_start_stop(scsicmd);
}
switch (scsicmd->cmnd[0])
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 113ca9c..73916ad 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -12,7 +12,7 @@
*----------------------------------------------------------------------------*/
#ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 2455
+# define AAC_DRIVER_BUILD 2456
# define AAC_DRIVER_BRANCH "-ms"
#endif
#define MAXIMUM_NUM_CONTAINERS 32
@@ -34,8 +34,8 @@
#define CONTAINER_TO_ID(cont) (cont)
#define CONTAINER_TO_LUN(cont) (0)
-#define aac_phys_to_logical(x) (x+1)
-#define aac_logical_to_phys(x) (x?x-1:0)
+#define aac_phys_to_logical(x) ((x)+1)
+#define aac_logical_to_phys(x) ((x)?(x)-1:0)
/* #define AAC_DETAILED_STATUS_INFO */
@@ -424,6 +424,8 @@
*/
__le32 InitFlags; /* flags for supported features */
#define INITFLAGS_NEW_COMM_SUPPORTED 0x00000001
+#define INITFLAGS_DRIVER_USES_UTC_TIME 0x00000010
+#define INITFLAGS_DRIVER_SUPPORTS_PM 0x00000020
__le32 MaxIoCommands; /* max outstanding commands */
__le32 MaxIoSize; /* largest I/O command */
__le32 MaxFibSize; /* largest FIB to adapter */
@@ -867,8 +869,10 @@
};
#define AAC_FEATURE_FALCON cpu_to_le32(0x00000010)
#define AAC_FEATURE_JBOD cpu_to_le32(0x08000000)
-#define AAC_OPTION_MU_RESET cpu_to_le32(0x00000001)
-#define AAC_OPTION_IGNORE_RESET cpu_to_le32(0x00000002)
+/* SupportedOptions2 */
+#define AAC_OPTION_MU_RESET cpu_to_le32(0x00000001)
+#define AAC_OPTION_IGNORE_RESET cpu_to_le32(0x00000002)
+#define AAC_OPTION_POWER_MANAGEMENT cpu_to_le32(0x00000004)
#define AAC_SIS_VERSION_V3 3
#define AAC_SIS_SLOT_UNKNOWN 0xFF
@@ -1148,6 +1152,7 @@
#define ST_DQUOT 69
#define ST_STALE 70
#define ST_REMOTE 71
+#define ST_NOT_READY 72
#define ST_BADHANDLE 10001
#define ST_NOT_SYNC 10002
#define ST_BAD_COOKIE 10003
@@ -1269,6 +1274,18 @@
u8 data[16];
};
+#define CT_POWER_MANAGEMENT 245
+#define CT_PM_START_UNIT 2
+#define CT_PM_STOP_UNIT 3
+#define CT_PM_UNIT_IMMEDIATE 1
+struct aac_power_management {
+ __le32 command; /* VM_ContainerConfig */
+ __le32 type; /* CT_POWER_MANAGEMENT */
+ __le32 sub; /* CT_PM_* */
+ __le32 cid;
+ __le32 parm; /* CT_PM_sub_* */
+};
+
#define CT_PAUSE_IO 65
#define CT_RELEASE_IO 66
struct aac_pause {
@@ -1536,6 +1553,7 @@
#define FSCS_NOTCLEAN 0x0001 /* fsck is necessary before mounting */
#define FSCS_READONLY 0x0002 /* possible result of broken mirror */
#define FSCS_HIDDEN 0x0004 /* should be ignored - set during a clear */
+#define FSCS_NOT_READY 0x0008 /* Array spinning up to fulfil request */
struct aac_query_mount {
__le32 command;
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index 294a802..cbac063 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -97,6 +97,8 @@
init->InitFlags = cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED);
dprintk((KERN_WARNING"aacraid: New Comm Interface enabled\n"));
}
+ init->InitFlags |= cpu_to_le32(INITFLAGS_DRIVER_USES_UTC_TIME |
+ INITFLAGS_DRIVER_SUPPORTS_PM);
init->MaxIoCommands = cpu_to_le32(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB);
init->MaxIoSize = cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9);
init->MaxFibSize = cpu_to_le32(dev->max_fib_size);
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index ef67816..289304a 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -515,7 +515,7 @@
}
udelay(5);
}
- } else if (down_interruptible(&fibptr->event_wait) == 0) {
+ } else if (down_interruptible(&fibptr->event_wait)) {
fibptr->done = 2;
up(&fibptr->event_wait);
}
@@ -906,15 +906,22 @@
case AifEnAddJBOD:
case AifEnDeleteJBOD:
container = le32_to_cpu(((__le32 *)aifcmd->data)[1]);
- if ((container >> 28))
+ if ((container >> 28)) {
+ container = (u32)-1;
break;
+ }
channel = (container >> 24) & 0xF;
- if (channel >= dev->maximum_num_channels)
+ if (channel >= dev->maximum_num_channels) {
+ container = (u32)-1;
break;
+ }
id = container & 0xFFFF;
- if (id >= dev->maximum_num_physicals)
+ if (id >= dev->maximum_num_physicals) {
+ container = (u32)-1;
break;
+ }
lun = (container >> 16) & 0xFF;
+ container = (u32)-1;
channel = aac_phys_to_logical(channel);
device_config_needed =
(((__le32 *)aifcmd->data)[0] ==
@@ -933,13 +940,18 @@
case EM_DRIVE_REMOVAL:
container = le32_to_cpu(
((__le32 *)aifcmd->data)[2]);
- if ((container >> 28))
+ if ((container >> 28)) {
+ container = (u32)-1;
break;
+ }
channel = (container >> 24) & 0xF;
- if (channel >= dev->maximum_num_channels)
+ if (channel >= dev->maximum_num_channels) {
+ container = (u32)-1;
break;
+ }
id = container & 0xFFFF;
lun = (container >> 16) & 0xFF;
+ container = (u32)-1;
if (id >= dev->maximum_num_physicals) {
/* legacy dev_t ? */
if ((0x2000 <= id) || lun || channel ||
@@ -1025,9 +1037,10 @@
break;
}
+ container = 0;
+retry_next:
if (device_config_needed == NOTHING)
- for (container = 0; container < dev->maximum_num_containers;
- ++container) {
+ for (; container < dev->maximum_num_containers; ++container) {
if ((dev->fsa_dev[container].config_waiting_on == 0) &&
(dev->fsa_dev[container].config_needed != NOTHING) &&
time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT)) {
@@ -1110,6 +1123,11 @@
}
if (device_config_needed == ADD)
scsi_add_device(dev->scsi_host_ptr, channel, id, lun);
+ if (channel == CONTAINER_CHANNEL) {
+ container++;
+ device_config_needed = NOTHING;
+ goto retry_next;
+ }
}
static int _aac_reset_adapter(struct aac_dev *aac, int forced)
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index c109f63..1f7c836 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -401,6 +401,8 @@
static int aac_slave_configure(struct scsi_device *sdev)
{
struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
+ if (aac->jbod && (sdev->type == TYPE_DISK))
+ sdev->removable = 1;
if ((sdev->type == TYPE_DISK) &&
(sdev_channel(sdev) != CONTAINER_CHANNEL) &&
(!aac->jbod || sdev->inq_periph_qual) &&
@@ -809,6 +811,12 @@
"SAI_READ_CAPACITY_16\n");
if (dev->jbod)
len += snprintf(buf + len, PAGE_SIZE - len, "SUPPORTED_JBOD\n");
+ if (dev->supplement_adapter_info.SupportedOptions2 &
+ AAC_OPTION_POWER_MANAGEMENT)
+ len += snprintf(buf + len, PAGE_SIZE - len,
+ "SUPPORTED_POWER_MANAGEMENT\n");
+ if (dev->msi)
+ len += snprintf(buf + len, PAGE_SIZE - len, "PCI_HAS_MSI\n");
return len;
}
@@ -1106,7 +1114,7 @@
aac->pdev = pdev;
aac->name = aac_driver_template.name;
aac->id = shost->unique_id;
- aac->cardtype = index;
+ aac->cardtype = index;
INIT_LIST_HEAD(&aac->entry);
aac->fibs = kmalloc(sizeof(struct fib) * (shost->can_queue + AAC_NUM_MGT_FIB), GFP_KERNEL);
@@ -1146,19 +1154,19 @@
goto out_deinit;
/*
- * Lets override negotiations and drop the maximum SG limit to 34
- */
+ * Lets override negotiations and drop the maximum SG limit to 34
+ */
if ((aac_drivers[index].quirks & AAC_QUIRK_34SG) &&
(shost->sg_tablesize > 34)) {
shost->sg_tablesize = 34;
shost->max_sectors = (shost->sg_tablesize * 8) + 112;
- }
+ }
- if ((aac_drivers[index].quirks & AAC_QUIRK_17SG) &&
+ if ((aac_drivers[index].quirks & AAC_QUIRK_17SG) &&
(shost->sg_tablesize > 17)) {
shost->sg_tablesize = 17;
shost->max_sectors = (shost->sg_tablesize * 8) + 112;
- }
+ }
error = pci_set_dma_max_seg_size(pdev,
(aac->adapter_info.options & AAC_OPT_NEW_COMM) ?
@@ -1174,7 +1182,7 @@
else
aac->printf_enabled = 0;
- /*
+ /*
* max channel will be the physical channels plus 1 virtual channel
* all containers are on the virtual channel 0 (CONTAINER_CHANNEL)
* physical channels are address by their actual physical number+1
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index f5215fd..1dca177 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -3830,7 +3830,7 @@
iounmap(p);
}
if (!ok && setup_count == 0)
- return 0;
+ return -ENODEV;
printk(KERN_INFO "aha152x: BIOS test: passed, ");
#else
@@ -3909,14 +3909,14 @@
#endif
}
- return 1;
+ return 0;
}
static void __exit aha152x_exit(void)
{
- struct aha152x_hostdata *hd;
+ struct aha152x_hostdata *hd, *tmp;
- list_for_each_entry(hd, &aha152x_host_list, host_list) {
+ list_for_each_entry_safe(hd, tmp, &aha152x_host_list, host_list) {
struct Scsi_Host *shost = container_of((void *)hd, struct Scsi_Host, hostdata);
aha152x_release(shost);
diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
index 90f5e0a..2a730c4 100644
--- a/drivers/scsi/aic94xx/aic94xx_init.c
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -529,10 +529,10 @@
/* The first entry, 0, is used for dynamic ids, the rest for devices
* we know about.
*/
-static struct asd_pcidev_struct {
+static const struct asd_pcidev_struct {
const char * name;
int (*setup)(struct asd_ha_struct *asd_ha);
-} asd_pcidev_data[] = {
+} asd_pcidev_data[] __devinitconst = {
/* Id 0 is used for dynamic ids. */
{ .name = "Adaptec AIC-94xx SAS/SATA Host Adapter",
.setup = asd_aic9410_setup
@@ -735,7 +735,7 @@
static int __devinit asd_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
- struct asd_pcidev_struct *asd_dev;
+ const struct asd_pcidev_struct *asd_dev;
unsigned asd_id = (unsigned) id->driver_data;
struct asd_ha_struct *asd_ha;
struct Scsi_Host *shost;
diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index 403a7f2..9785d73 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -28,7 +28,6 @@
#define SERVICE_ACTION_OUT_12 0xa9
#define SERVICE_ACTION_IN_16 0x9e
#define SERVICE_ACTION_OUT_16 0x9f
-#define VARIABLE_LENGTH_CMD 0x7f
@@ -210,7 +209,7 @@
cdb0 = cdbp[0];
switch(cdb0) {
case VARIABLE_LENGTH_CMD:
- len = cdbp[7] + 8;
+ len = scsi_varlen_cdb_length(cdbp);
if (len < 10) {
printk("short variable length command, "
"len=%d ext_len=%d", len, cdb_len);
@@ -300,7 +299,7 @@
cdb0 = cdbp[0];
switch(cdb0) {
case VARIABLE_LENGTH_CMD:
- len = cdbp[7] + 8;
+ len = scsi_varlen_cdb_length(cdbp);
if (len < 10) {
printk("short opcode=0x%x command, len=%d "
"ext_len=%d", cdb0, len, cdb_len);
@@ -335,10 +334,7 @@
int k, len;
print_opcode_name(cdb, 0);
- if (VARIABLE_LENGTH_CMD == cdb[0])
- len = cdb[7] + 8;
- else
- len = COMMAND_SIZE(cdb[0]);
+ len = scsi_command_size(cdb);
/* print out all bytes in cdb */
for (k = 0; k < len; ++k)
printk(" %02x", cdb[k]);
diff --git a/drivers/scsi/dpt/dpti_ioctl.h b/drivers/scsi/dpt/dpti_ioctl.h
index cc784e8..f602367 100644
--- a/drivers/scsi/dpt/dpti_ioctl.h
+++ b/drivers/scsi/dpt/dpti_ioctl.h
@@ -89,7 +89,7 @@
int njobs; /* # of jobs sent to HA */
int qdepth; /* Controller queue depth. */
int wakebase; /* mpx wakeup base index. */
- uLONG SGsize; /* Scatter/Gather list size. */
+ uINT SGsize; /* Scatter/Gather list size. */
unsigned heads; /* heads for drives on cntlr. */
unsigned sectors; /* sectors for drives on cntlr. */
uCHAR do_drive32; /* Flag for Above 16 MB Ability */
@@ -97,8 +97,8 @@
char idPAL[4]; /* 4 Bytes Of The ID Pal */
uCHAR primary; /* 1 For Primary, 0 For Secondary */
uCHAR eataVersion; /* EATA Version */
- uLONG cpLength; /* EATA Command Packet Length */
- uLONG spLength; /* EATA Status Packet Length */
+ uINT cpLength; /* EATA Command Packet Length */
+ uINT spLength; /* EATA Status Packet Length */
uCHAR drqNum; /* DRQ Index (0,5,6,7) */
uCHAR flag1; /* EATA Flags 1 (Byte 9) */
uCHAR flag2; /* EATA Flags 2 (Byte 30) */
@@ -107,23 +107,23 @@
typedef struct {
uSHORT length; // Remaining length of this
uSHORT drvrHBAnum; // Relative HBA # used by the driver
- uLONG baseAddr; // Base I/O address
+ uINT baseAddr; // Base I/O address
uSHORT blinkState; // Blink LED state (0=Not in blink LED)
uCHAR pciBusNum; // PCI Bus # (Optional)
uCHAR pciDeviceNum; // PCI Device # (Optional)
uSHORT hbaFlags; // Miscellaneous HBA flags
uSHORT Interrupt; // Interrupt set for this device.
# if (defined(_DPT_ARC))
- uLONG baseLength;
+ uINT baseLength;
ADAPTER_OBJECT *AdapterObject;
LARGE_INTEGER DmaLogicalAddress;
PVOID DmaVirtualAddress;
LARGE_INTEGER ReplyLogicalAddress;
PVOID ReplyVirtualAddress;
# else
- uLONG reserved1; // Reserved for future expansion
- uLONG reserved2; // Reserved for future expansion
- uLONG reserved3; // Reserved for future expansion
+ uINT reserved1; // Reserved for future expansion
+ uINT reserved2; // Reserved for future expansion
+ uINT reserved3; // Reserved for future expansion
# endif
} drvrHBAinfo_S;
diff --git a/drivers/scsi/dpt/dptsig.h b/drivers/scsi/dpt/dptsig.h
index 94bc894..72c8992 100644
--- a/drivers/scsi/dpt/dptsig.h
+++ b/drivers/scsi/dpt/dptsig.h
@@ -33,11 +33,7 @@
/* to make sure we are talking the same size under all OS's */
typedef unsigned char sigBYTE;
typedef unsigned short sigWORD;
-#if (defined(_MULTI_DATAMODEL) && defined(sun) && !defined(_ILP32))
-typedef uint32_t sigLONG;
-#else
-typedef unsigned long sigLONG;
-#endif
+typedef unsigned int sigINT;
/*
* use sigWORDLittleEndian for:
@@ -300,7 +296,7 @@
sigBYTE dsFiletype; /* type of file */
sigBYTE dsFiletypeFlags; /* flags to specify load type, etc. */
sigBYTE dsOEM; /* OEM file was created for */
- sigLONG dsOS; /* which Operating systems */
+ sigINT dsOS; /* which Operating systems */
sigWORD dsCapabilities; /* RAID levels, etc. */
sigWORD dsDeviceSupp; /* Types of SCSI devices supported */
sigWORD dsAdapterSupp; /* DPT adapter families supported */
diff --git a/drivers/scsi/dpt/sys_info.h b/drivers/scsi/dpt/sys_info.h
index d23b70c..a90c4cb 100644
--- a/drivers/scsi/dpt/sys_info.h
+++ b/drivers/scsi/dpt/sys_info.h
@@ -145,8 +145,8 @@
uCHAR smartROMRevision;
uSHORT flags; /* See bit definitions above */
uSHORT conventionalMemSize; /* in KB */
- uLONG extendedMemSize; /* in KB */
- uLONG osType; /* Same as DPTSIG's definition */
+ uINT extendedMemSize; /* in KB */
+ uINT osType; /* Same as DPTSIG's definition */
uCHAR osMajorVersion;
uCHAR osMinorVersion; /* The OS version */
uCHAR osRevision;
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index ac92ac1..8508816 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -29,11 +29,6 @@
/*#define DEBUG 1 */
/*#define UARTDELAY 1 */
-/* On the real kernel ADDR32 should always be zero for 2.4. GFP_HIGH allocates
- high pages. Keep the macro around because of the broken unmerged ia64 tree */
-
-#define ADDR32 (0)
-
#include <linux/module.h>
MODULE_AUTHOR("Deanna Bonds, with _lots_ of help from Mark Salyzyn");
@@ -108,27 +103,28 @@
static DEFINE_MUTEX(adpt_configuration_lock);
-static struct i2o_sys_tbl *sys_tbl = NULL;
-static int sys_tbl_ind = 0;
-static int sys_tbl_len = 0;
+static struct i2o_sys_tbl *sys_tbl;
+static dma_addr_t sys_tbl_pa;
+static int sys_tbl_ind;
+static int sys_tbl_len;
static adpt_hba* hba_chain = NULL;
static int hba_count = 0;
+static struct class *adpt_sysfs_class;
+
+#ifdef CONFIG_COMPAT
+static long compat_adpt_ioctl(struct file *, unsigned int, unsigned long);
+#endif
+
static const struct file_operations adpt_fops = {
.ioctl = adpt_ioctl,
.open = adpt_open,
- .release = adpt_close
-};
-
-#ifdef REBOOT_NOTIFIER
-static struct notifier_block adpt_reboot_notifier =
-{
- adpt_reboot_event,
- NULL,
- 0
-};
+ .release = adpt_close,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = compat_adpt_ioctl,
#endif
+};
/* Structures and definitions for synchronous message posting.
* See adpt_i2o_post_wait() for description
@@ -151,6 +147,21 @@
*============================================================================
*/
+static inline int dpt_dma64(adpt_hba *pHba)
+{
+ return (sizeof(dma_addr_t) > 4 && (pHba)->dma64);
+}
+
+static inline u32 dma_high(dma_addr_t addr)
+{
+ return upper_32_bits(addr);
+}
+
+static inline u32 dma_low(dma_addr_t addr)
+{
+ return (u32)addr;
+}
+
static u8 adpt_read_blink_led(adpt_hba* host)
{
if (host->FwDebugBLEDflag_P) {
@@ -178,8 +189,6 @@
struct pci_dev *pDev = NULL;
adpt_hba* pHba;
- adpt_init();
-
PINFO("Detecting Adaptec I2O RAID controllers...\n");
/* search for all Adatpec I2O RAID cards */
@@ -247,13 +256,29 @@
adpt_inquiry(pHba);
}
+ adpt_sysfs_class = class_create(THIS_MODULE, "dpt_i2o");
+ if (IS_ERR(adpt_sysfs_class)) {
+ printk(KERN_WARNING"dpti: unable to create dpt_i2o class\n");
+ adpt_sysfs_class = NULL;
+ }
+
for (pHba = hba_chain; pHba; pHba = pHba->next) {
- if( adpt_scsi_register(pHba,sht) < 0){
+ if (adpt_scsi_host_alloc(pHba, sht) < 0){
adpt_i2o_delete_hba(pHba);
continue;
}
pHba->initialized = TRUE;
pHba->state &= ~DPTI_STATE_RESET;
+ if (adpt_sysfs_class) {
+ struct device *dev = device_create(adpt_sysfs_class,
+ NULL, MKDEV(DPTI_I2O_MAJOR, pHba->unit),
+ "dpti%d", pHba->unit);
+ if (IS_ERR(dev)) {
+ printk(KERN_WARNING"dpti%d: unable to "
+ "create device in dpt_i2o class\n",
+ pHba->unit);
+ }
+ }
}
// Register our control device node
@@ -282,7 +307,7 @@
static void adpt_inquiry(adpt_hba* pHba)
{
- u32 msg[14];
+ u32 msg[17];
u32 *mptr;
u32 *lenptr;
int direction;
@@ -290,11 +315,12 @@
u32 len;
u32 reqlen;
u8* buf;
+ dma_addr_t addr;
u8 scb[16];
s32 rcode;
memset(msg, 0, sizeof(msg));
- buf = kmalloc(80,GFP_KERNEL|ADDR32);
+ buf = dma_alloc_coherent(&pHba->pDev->dev, 80, &addr, GFP_KERNEL);
if(!buf){
printk(KERN_ERR"%s: Could not allocate buffer\n",pHba->name);
return;
@@ -305,7 +331,10 @@
direction = 0x00000000;
scsidir =0x40000000; // DATA IN (iop<--dev)
- reqlen = 14; // SINGLE SGE
+ if (dpt_dma64(pHba))
+ reqlen = 17; // SINGLE SGE, 64 bit
+ else
+ reqlen = 14; // SINGLE SGE, 32 bit
/* Stick the headers on */
msg[0] = reqlen<<16 | SGL_OFFSET_12;
msg[1] = (0xff<<24|HOST_TID<<12|ADAPTER_TID);
@@ -338,8 +367,16 @@
/* Now fill in the SGList and command */
*lenptr = len;
- *mptr++ = 0xD0000000|direction|len;
- *mptr++ = virt_to_bus(buf);
+ if (dpt_dma64(pHba)) {
+ *mptr++ = (0x7C<<24)+(2<<16)+0x02; /* Enable 64 bit */
+ *mptr++ = 1 << PAGE_SHIFT;
+ *mptr++ = 0xD0000000|direction|len;
+ *mptr++ = dma_low(addr);
+ *mptr++ = dma_high(addr);
+ } else {
+ *mptr++ = 0xD0000000|direction|len;
+ *mptr++ = addr;
+ }
// Send it on it's way
rcode = adpt_i2o_post_wait(pHba, msg, reqlen<<2, 120);
@@ -347,7 +384,7 @@
sprintf(pHba->detail, "Adaptec I2O RAID");
printk(KERN_INFO "%s: Inquiry Error (%d)\n",pHba->name,rcode);
if (rcode != -ETIME && rcode != -EINTR)
- kfree(buf);
+ dma_free_coherent(&pHba->pDev->dev, 80, buf, addr);
} else {
memset(pHba->detail, 0, sizeof(pHba->detail));
memcpy(&(pHba->detail), "Vendor: Adaptec ", 16);
@@ -356,7 +393,7 @@
memcpy(&(pHba->detail[40]), " FW: ", 4);
memcpy(&(pHba->detail[44]), (u8*) &buf[32], 4);
pHba->detail[48] = '\0'; /* precautionary */
- kfree(buf);
+ dma_free_coherent(&pHba->pDev->dev, 80, buf, addr);
}
adpt_i2o_status_get(pHba);
return ;
@@ -632,6 +669,91 @@
return len;
}
+/*
+ * Turn a struct scsi_cmnd * into a unique 32 bit 'context'.
+ */
+static u32 adpt_cmd_to_context(struct scsi_cmnd *cmd)
+{
+ return (u32)cmd->serial_number;
+}
+
+/*
+ * Go from a u32 'context' to a struct scsi_cmnd * .
+ * This could probably be made more efficient.
+ */
+static struct scsi_cmnd *
+ adpt_cmd_from_context(adpt_hba * pHba, u32 context)
+{
+ struct scsi_cmnd * cmd;
+ struct scsi_device * d;
+
+ if (context == 0)
+ return NULL;
+
+ spin_unlock(pHba->host->host_lock);
+ shost_for_each_device(d, pHba->host) {
+ unsigned long flags;
+ spin_lock_irqsave(&d->list_lock, flags);
+ list_for_each_entry(cmd, &d->cmd_list, list) {
+ if (((u32)cmd->serial_number == context)) {
+ spin_unlock_irqrestore(&d->list_lock, flags);
+ scsi_device_put(d);
+ spin_lock(pHba->host->host_lock);
+ return cmd;
+ }
+ }
+ spin_unlock_irqrestore(&d->list_lock, flags);
+ }
+ spin_lock(pHba->host->host_lock);
+
+ return NULL;
+}
+
+/*
+ * Turn a pointer to ioctl reply data into an u32 'context'
+ */
+static u32 adpt_ioctl_to_context(adpt_hba * pHba, void *reply)
+{
+#if BITS_PER_LONG == 32
+ return (u32)(unsigned long)reply;
+#else
+ ulong flags = 0;
+ u32 nr, i;
+
+ spin_lock_irqsave(pHba->host->host_lock, flags);
+ nr = ARRAY_SIZE(pHba->ioctl_reply_context);
+ for (i = 0; i < nr; i++) {
+ if (pHba->ioctl_reply_context[i] == NULL) {
+ pHba->ioctl_reply_context[i] = reply;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(pHba->host->host_lock, flags);
+ if (i >= nr) {
+ kfree (reply);
+ printk(KERN_WARNING"%s: Too many outstanding "
+ "ioctl commands\n", pHba->name);
+ return (u32)-1;
+ }
+
+ return i;
+#endif
+}
+
+/*
+ * Go from an u32 'context' to a pointer to ioctl reply data.
+ */
+static void *adpt_ioctl_from_context(adpt_hba *pHba, u32 context)
+{
+#if BITS_PER_LONG == 32
+ return (void *)(unsigned long)context;
+#else
+ void *p = pHba->ioctl_reply_context[context];
+ pHba->ioctl_reply_context[context] = NULL;
+
+ return p;
+#endif
+}
/*===========================================================================
* Error Handling routines
@@ -660,7 +782,7 @@
msg[1] = I2O_CMD_SCSI_ABORT<<24|HOST_TID<<12|dptdevice->tid;
msg[2] = 0;
msg[3]= 0;
- msg[4] = (u32)cmd;
+ msg[4] = adpt_cmd_to_context(cmd);
if (pHba->host)
spin_lock_irq(pHba->host->host_lock);
rcode = adpt_i2o_post_wait(pHba, msg, sizeof(msg), FOREVER);
@@ -861,27 +983,6 @@
printk(KERN_INFO "Adaptec I2O controllers down.\n");
}
-/*
- * reboot/shutdown notification.
- *
- * - Quiesce each IOP in the system
- *
- */
-
-#ifdef REBOOT_NOTIFIER
-static int adpt_reboot_event(struct notifier_block *n, ulong code, void *p)
-{
-
- if(code != SYS_RESTART && code != SYS_HALT && code != SYS_POWER_OFF)
- return NOTIFY_DONE;
-
- adpt_i2o_sys_shutdown();
-
- return NOTIFY_DONE;
-}
-#endif
-
-
static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev)
{
@@ -893,6 +994,7 @@
u32 hba_map1_area_size = 0;
void __iomem *base_addr_virt = NULL;
void __iomem *msg_addr_virt = NULL;
+ int dma64 = 0;
int raptorFlag = FALSE;
@@ -906,9 +1008,21 @@
}
pci_set_master(pDev);
- if (pci_set_dma_mask(pDev, DMA_32BIT_MASK))
+
+ /*
+ * See if we should enable dma64 mode.
+ */
+ if (sizeof(dma_addr_t) > 4 &&
+ pci_set_dma_mask(pDev, DMA_64BIT_MASK) == 0) {
+ if (dma_get_required_mask(&pDev->dev) > DMA_32BIT_MASK)
+ dma64 = 1;
+ }
+ if (!dma64 && pci_set_dma_mask(pDev, DMA_32BIT_MASK) != 0)
return -EINVAL;
+ /* adapter only supports message blocks below 4GB */
+ pci_set_consistent_dma_mask(pDev, DMA_32BIT_MASK);
+
base_addr0_phys = pci_resource_start(pDev,0);
hba_map0_area_size = pci_resource_len(pDev,0);
@@ -929,6 +1043,25 @@
raptorFlag = TRUE;
}
+#if BITS_PER_LONG == 64
+ /*
+ * The original Adaptec 64 bit driver has this comment here:
+ * "x86_64 machines need more optimal mappings"
+ *
+ * I assume some HBAs report ridiculously large mappings
+ * and we need to limit them on platforms with IOMMUs.
+ */
+ if (raptorFlag == TRUE) {
+ if (hba_map0_area_size > 128)
+ hba_map0_area_size = 128;
+ if (hba_map1_area_size > 524288)
+ hba_map1_area_size = 524288;
+ } else {
+ if (hba_map0_area_size > 524288)
+ hba_map0_area_size = 524288;
+ }
+#endif
+
base_addr_virt = ioremap(base_addr0_phys,hba_map0_area_size);
if (!base_addr_virt) {
pci_release_regions(pDev);
@@ -991,16 +1124,22 @@
pHba->state = DPTI_STATE_RESET;
pHba->pDev = pDev;
pHba->devices = NULL;
+ pHba->dma64 = dma64;
// Initializing the spinlocks
spin_lock_init(&pHba->state_lock);
spin_lock_init(&adpt_post_wait_lock);
if(raptorFlag == 0){
- printk(KERN_INFO"Adaptec I2O RAID controller %d at %p size=%x irq=%d\n",
- hba_count-1, base_addr_virt, hba_map0_area_size, pDev->irq);
+ printk(KERN_INFO "Adaptec I2O RAID controller"
+ " %d at %p size=%x irq=%d%s\n",
+ hba_count-1, base_addr_virt,
+ hba_map0_area_size, pDev->irq,
+ dma64 ? " (64-bit DMA)" : "");
} else {
- printk(KERN_INFO"Adaptec I2O RAID controller %d irq=%d\n",hba_count-1, pDev->irq);
+ printk(KERN_INFO"Adaptec I2O RAID controller %d irq=%d%s\n",
+ hba_count-1, pDev->irq,
+ dma64 ? " (64-bit DMA)" : "");
printk(KERN_INFO" BAR0 %p - size= %x\n",base_addr_virt,hba_map0_area_size);
printk(KERN_INFO" BAR1 %p - size= %x\n",msg_addr_virt,hba_map1_area_size);
}
@@ -1053,10 +1192,26 @@
if(pHba->msg_addr_virt != pHba->base_addr_virt){
iounmap(pHba->msg_addr_virt);
}
- kfree(pHba->hrt);
- kfree(pHba->lct);
- kfree(pHba->status_block);
- kfree(pHba->reply_pool);
+ if(pHba->FwDebugBuffer_P)
+ iounmap(pHba->FwDebugBuffer_P);
+ if(pHba->hrt) {
+ dma_free_coherent(&pHba->pDev->dev,
+ pHba->hrt->num_entries * pHba->hrt->entry_len << 2,
+ pHba->hrt, pHba->hrt_pa);
+ }
+ if(pHba->lct) {
+ dma_free_coherent(&pHba->pDev->dev, pHba->lct_size,
+ pHba->lct, pHba->lct_pa);
+ }
+ if(pHba->status_block) {
+ dma_free_coherent(&pHba->pDev->dev, sizeof(i2o_status_block),
+ pHba->status_block, pHba->status_block_pa);
+ }
+ if(pHba->reply_pool) {
+ dma_free_coherent(&pHba->pDev->dev,
+ pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4,
+ pHba->reply_pool, pHba->reply_pool_pa);
+ }
for(d = pHba->devices; d ; d = next){
next = d->next;
@@ -1075,23 +1230,19 @@
pci_dev_put(pHba->pDev);
kfree(pHba);
+ if (adpt_sysfs_class)
+ device_destroy(adpt_sysfs_class,
+ MKDEV(DPTI_I2O_MAJOR, pHba->unit));
+
if(hba_count <= 0){
unregister_chrdev(DPTI_I2O_MAJOR, DPT_DRIVER);
+ if (adpt_sysfs_class) {
+ class_destroy(adpt_sysfs_class);
+ adpt_sysfs_class = NULL;
+ }
}
}
-
-static int adpt_init(void)
-{
- printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n");
-#ifdef REBOOT_NOTIFIER
- register_reboot_notifier(&adpt_reboot_notifier);
-#endif
-
- return 0;
-}
-
-
static struct adpt_device* adpt_find_device(adpt_hba* pHba, u32 chan, u32 id, u32 lun)
{
struct adpt_device* d;
@@ -1283,6 +1434,7 @@
{
u32 msg[8];
u8* status;
+ dma_addr_t addr;
u32 m = EMPTY_QUEUE ;
ulong timeout = jiffies + (TMOUT_IOPRESET*HZ);
@@ -1305,12 +1457,13 @@
schedule_timeout_uninterruptible(1);
} while (m == EMPTY_QUEUE);
- status = kzalloc(4, GFP_KERNEL|ADDR32);
+ status = dma_alloc_coherent(&pHba->pDev->dev, 4, &addr, GFP_KERNEL);
if(status == NULL) {
adpt_send_nop(pHba, m);
printk(KERN_ERR"IOP reset failed - no free memory.\n");
return -ENOMEM;
}
+ memset(status,0,4);
msg[0]=EIGHT_WORD_MSG_SIZE|SGL_OFFSET_0;
msg[1]=I2O_CMD_ADAPTER_RESET<<24|HOST_TID<<12|ADAPTER_TID;
@@ -1318,8 +1471,8 @@
msg[3]=0;
msg[4]=0;
msg[5]=0;
- msg[6]=virt_to_bus(status);
- msg[7]=0;
+ msg[6]=dma_low(addr);
+ msg[7]=dma_high(addr);
memcpy_toio(pHba->msg_addr_virt+m, msg, sizeof(msg));
wmb();
@@ -1329,7 +1482,10 @@
while(*status == 0){
if(time_after(jiffies,timeout)){
printk(KERN_WARNING"%s: IOP Reset Timeout\n",pHba->name);
- kfree(status);
+ /* We lose 4 bytes of "status" here, but we cannot
+ free these because controller may awake and corrupt
+ those bytes at any time */
+ /* dma_free_coherent(&pHba->pDev->dev, 4, buf, addr); */
return -ETIMEDOUT;
}
rmb();
@@ -1348,6 +1504,10 @@
}
if(time_after(jiffies,timeout)){
printk(KERN_ERR "%s:Timeout waiting for IOP Reset.\n",pHba->name);
+ /* We lose 4 bytes of "status" here, but we
+ cannot free these because controller may
+ awake and corrupt those bytes at any time */
+ /* dma_free_coherent(&pHba->pDev->dev, 4, buf, addr); */
return -ETIMEDOUT;
}
schedule_timeout_uninterruptible(1);
@@ -1364,7 +1524,7 @@
PDEBUG("%s: Reset completed.\n", pHba->name);
}
- kfree(status);
+ dma_free_coherent(&pHba->pDev->dev, 4, status, addr);
#ifdef UARTDELAY
// This delay is to allow someone attached to the card through the debug UART to
// set up the dump levels that they want before the rest of the initialization sequence
@@ -1636,6 +1796,7 @@
u32 i = 0;
u32 rcode = 0;
void *p = NULL;
+ dma_addr_t addr;
ulong flags = 0;
memset(&msg, 0, MAX_MESSAGE_SIZE*4);
@@ -1668,10 +1829,13 @@
}
sg_offset = (msg[0]>>4)&0xf;
msg[2] = 0x40000000; // IOCTL context
- msg[3] = (u32)reply;
+ msg[3] = adpt_ioctl_to_context(pHba, reply);
+ if (msg[3] == (u32)-1)
+ return -EBUSY;
+
memset(sg_list,0, sizeof(sg_list[0])*pHba->sg_tablesize);
if(sg_offset) {
- // TODO 64bit fix
+ // TODO add 64 bit API
struct sg_simple_element *sg = (struct sg_simple_element*) (msg+sg_offset);
sg_count = (size - sg_offset*4) / sizeof(struct sg_simple_element);
if (sg_count > pHba->sg_tablesize){
@@ -1690,7 +1854,7 @@
}
sg_size = sg[i].flag_count & 0xffffff;
/* Allocate memory for the transfer */
- p = kmalloc(sg_size, GFP_KERNEL|ADDR32);
+ p = dma_alloc_coherent(&pHba->pDev->dev, sg_size, &addr, GFP_KERNEL);
if(!p) {
printk(KERN_DEBUG"%s: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
pHba->name,sg_size,i,sg_count);
@@ -1700,15 +1864,15 @@
sg_list[sg_index++] = p; // sglist indexed with input frame, not our internal frame.
/* Copy in the user's SG buffer if necessary */
if(sg[i].flag_count & 0x04000000 /*I2O_SGL_FLAGS_DIR*/) {
- // TODO 64bit fix
- if (copy_from_user(p,(void __user *)sg[i].addr_bus, sg_size)) {
+ // sg_simple_element API is 32 bit
+ if (copy_from_user(p,(void __user *)(ulong)sg[i].addr_bus, sg_size)) {
printk(KERN_DEBUG"%s: Could not copy SG buf %d FROM user\n",pHba->name,i);
rcode = -EFAULT;
goto cleanup;
}
}
- //TODO 64bit fix
- sg[i].addr_bus = (u32)virt_to_bus(p);
+ /* sg_simple_element API is 32 bit, but addr < 4GB */
+ sg[i].addr_bus = addr;
}
}
@@ -1736,7 +1900,7 @@
if(sg_offset) {
/* Copy back the Scatter Gather buffers back to user space */
u32 j;
- // TODO 64bit fix
+ // TODO add 64 bit API
struct sg_simple_element* sg;
int sg_size;
@@ -1756,14 +1920,14 @@
}
sg_count = (size - sg_offset*4) / sizeof(struct sg_simple_element);
- // TODO 64bit fix
+ // TODO add 64 bit API
sg = (struct sg_simple_element*)(msg + sg_offset);
for (j = 0; j < sg_count; j++) {
/* Copy out the SG list to user's buffer if necessary */
if(! (sg[j].flag_count & 0x4000000 /*I2O_SGL_FLAGS_DIR*/)) {
sg_size = sg[j].flag_count & 0xffffff;
- // TODO 64bit fix
- if (copy_to_user((void __user *)sg[j].addr_bus,sg_list[j], sg_size)) {
+ // sg_simple_element API is 32 bit
+ if (copy_to_user((void __user *)(ulong)sg[j].addr_bus,sg_list[j], sg_size)) {
printk(KERN_WARNING"%s: Could not copy %p TO user %x\n",pHba->name, sg_list[j], sg[j].addr_bus);
rcode = -EFAULT;
goto cleanup;
@@ -1787,56 +1951,22 @@
cleanup:
- if (rcode != -ETIME && rcode != -EINTR)
+ if (rcode != -ETIME && rcode != -EINTR) {
+ struct sg_simple_element *sg =
+ (struct sg_simple_element*) (msg +sg_offset);
kfree (reply);
- while(sg_index) {
- if(sg_list[--sg_index]) {
- if (rcode != -ETIME && rcode != -EINTR)
- kfree(sg_list[sg_index]);
+ while(sg_index) {
+ if(sg_list[--sg_index]) {
+ dma_free_coherent(&pHba->pDev->dev,
+ sg[sg_index].flag_count & 0xffffff,
+ sg_list[sg_index],
+ sg[sg_index].addr_bus);
+ }
}
}
return rcode;
}
-
-/*
- * This routine returns information about the system. This does not effect
- * any logic and if the info is wrong - it doesn't matter.
- */
-
-/* Get all the info we can not get from kernel services */
-static int adpt_system_info(void __user *buffer)
-{
- sysInfo_S si;
-
- memset(&si, 0, sizeof(si));
-
- si.osType = OS_LINUX;
- si.osMajorVersion = 0;
- si.osMinorVersion = 0;
- si.osRevision = 0;
- si.busType = SI_PCI_BUS;
- si.processorFamily = DPTI_sig.dsProcessorFamily;
-
-#if defined __i386__
- adpt_i386_info(&si);
-#elif defined (__ia64__)
- adpt_ia64_info(&si);
-#elif defined(__sparc__)
- adpt_sparc_info(&si);
-#elif defined (__alpha__)
- adpt_alpha_info(&si);
-#else
- si.processorType = 0xff ;
-#endif
- if(copy_to_user(buffer, &si, sizeof(si))){
- printk(KERN_WARNING"dpti: Could not copy buffer TO user\n");
- return -EFAULT;
- }
-
- return 0;
-}
-
#if defined __ia64__
static void adpt_ia64_info(sysInfo_S* si)
{
@@ -1847,7 +1977,6 @@
}
#endif
-
#if defined __sparc__
static void adpt_sparc_info(sysInfo_S* si)
{
@@ -1857,7 +1986,6 @@
si->processorType = PROC_ULTRASPARC;
}
#endif
-
#if defined __alpha__
static void adpt_alpha_info(sysInfo_S* si)
{
@@ -1869,7 +1997,6 @@
#endif
#if defined __i386__
-
static void adpt_i386_info(sysInfo_S* si)
{
// This is all the info we need for now
@@ -1890,9 +2017,45 @@
break;
}
}
-
#endif
+/*
+ * This routine returns information about the system. This does not effect
+ * any logic and if the info is wrong - it doesn't matter.
+ */
+
+/* Get all the info we can not get from kernel services */
+static int adpt_system_info(void __user *buffer)
+{
+ sysInfo_S si;
+
+ memset(&si, 0, sizeof(si));
+
+ si.osType = OS_LINUX;
+ si.osMajorVersion = 0;
+ si.osMinorVersion = 0;
+ si.osRevision = 0;
+ si.busType = SI_PCI_BUS;
+ si.processorFamily = DPTI_sig.dsProcessorFamily;
+
+#if defined __i386__
+ adpt_i386_info(&si);
+#elif defined (__ia64__)
+ adpt_ia64_info(&si);
+#elif defined(__sparc__)
+ adpt_sparc_info(&si);
+#elif defined (__alpha__)
+ adpt_alpha_info(&si);
+#else
+ si.processorType = 0xff ;
+#endif
+ if (copy_to_user(buffer, &si, sizeof(si))){
+ printk(KERN_WARNING"dpti: Could not copy buffer TO user\n");
+ return -EFAULT;
+ }
+
+ return 0;
+}
static int adpt_ioctl(struct inode *inode, struct file *file, uint cmd,
ulong arg)
@@ -1978,6 +2141,38 @@
return error;
}
+#ifdef CONFIG_COMPAT
+static long compat_adpt_ioctl(struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct inode *inode;
+ long ret;
+
+ inode = file->f_dentry->d_inode;
+
+ lock_kernel();
+
+ switch(cmd) {
+ case DPT_SIGNATURE:
+ case I2OUSRCMD:
+ case DPT_CTRLINFO:
+ case DPT_SYSINFO:
+ case DPT_BLINKLED:
+ case I2ORESETCMD:
+ case I2ORESCANCMD:
+ case (DPT_TARGET_BUSY & 0xFFFF):
+ case DPT_TARGET_BUSY:
+ ret = adpt_ioctl(inode, file, cmd, arg);
+ break;
+ default:
+ ret = -ENOIOCTLCMD;
+ }
+
+ unlock_kernel();
+
+ return ret;
+}
+#endif
static irqreturn_t adpt_isr(int irq, void *dev_id)
{
@@ -2009,7 +2204,16 @@
goto out;
}
}
- reply = bus_to_virt(m);
+ if (pHba->reply_pool_pa <= m &&
+ m < pHba->reply_pool_pa +
+ (pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4)) {
+ reply = (u8 *)pHba->reply_pool +
+ (m - pHba->reply_pool_pa);
+ } else {
+ /* Ick, we should *never* be here */
+ printk(KERN_ERR "dpti: reply frame not from pool\n");
+ reply = (u8 *)bus_to_virt(m);
+ }
if (readl(reply) & MSG_FAIL) {
u32 old_m = readl(reply+28);
@@ -2029,7 +2233,7 @@
}
context = readl(reply+8);
if(context & 0x40000000){ // IOCTL
- void *p = (void *)readl(reply+12);
+ void *p = adpt_ioctl_from_context(pHba, readl(reply+12));
if( p != NULL) {
memcpy_fromio(p, reply, REPLY_FRAME_SIZE * 4);
}
@@ -2043,15 +2247,17 @@
status = I2O_POST_WAIT_OK;
}
if(!(context & 0x40000000)) {
- cmd = (struct scsi_cmnd*) readl(reply+12);
+ cmd = adpt_cmd_from_context(pHba,
+ readl(reply+12));
if(cmd != NULL) {
printk(KERN_WARNING"%s: Apparent SCSI cmd in Post Wait Context - cmd=%p context=%x\n", pHba->name, cmd, context);
}
}
adpt_i2o_post_wait_complete(context, status);
} else { // SCSI message
- cmd = (struct scsi_cmnd*) readl(reply+12);
+ cmd = adpt_cmd_from_context (pHba, readl(reply+12));
if(cmd != NULL){
+ scsi_dma_unmap(cmd);
if(cmd->serial_number != 0) { // If not timedout
adpt_i2o_to_scsi(reply, cmd);
}
@@ -2072,6 +2278,7 @@
int i;
u32 msg[MAX_MESSAGE_SIZE];
u32* mptr;
+ u32* lptr;
u32 *lenptr;
int direction;
int scsidir;
@@ -2079,6 +2286,7 @@
u32 len;
u32 reqlen;
s32 rcode;
+ dma_addr_t addr;
memset(msg, 0 , sizeof(msg));
len = scsi_bufflen(cmd);
@@ -2118,7 +2326,7 @@
// I2O_CMD_SCSI_EXEC
msg[1] = ((0xff<<24)|(HOST_TID<<12)|d->tid);
msg[2] = 0;
- msg[3] = (u32)cmd; /* We want the SCSI control block back */
+ msg[3] = adpt_cmd_to_context(cmd); /* Want SCSI control block back */
// Our cards use the transaction context as the tag for queueing
// Adaptec/DPT Private stuff
msg[4] = I2O_CMD_SCSI_EXEC|(DPT_ORGANIZATION_ID<<16);
@@ -2136,7 +2344,13 @@
memcpy(mptr, cmd->cmnd, cmd->cmd_len);
mptr+=4;
lenptr=mptr++; /* Remember me - fill in when we know */
- reqlen = 14; // SINGLE SGE
+ if (dpt_dma64(pHba)) {
+ reqlen = 16; // SINGLE SGE
+ *mptr++ = (0x7C<<24)+(2<<16)+0x02; /* Enable 64 bit */
+ *mptr++ = 1 << PAGE_SHIFT;
+ } else {
+ reqlen = 14; // SINGLE SGE
+ }
/* Now fill in the SGList and command */
nseg = scsi_dma_map(cmd);
@@ -2146,12 +2360,16 @@
len = 0;
scsi_for_each_sg(cmd, sg, nseg, i) {
+ lptr = mptr;
*mptr++ = direction|0x10000000|sg_dma_len(sg);
len+=sg_dma_len(sg);
- *mptr++ = sg_dma_address(sg);
+ addr = sg_dma_address(sg);
+ *mptr++ = dma_low(addr);
+ if (dpt_dma64(pHba))
+ *mptr++ = dma_high(addr);
/* Make this an end of list */
if (i == nseg - 1)
- mptr[-2] = direction|0xD0000000|sg_dma_len(sg);
+ *lptr = direction|0xD0000000|sg_dma_len(sg);
}
reqlen = mptr - msg;
*lenptr = len;
@@ -2177,13 +2395,13 @@
}
-static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht)
+static s32 adpt_scsi_host_alloc(adpt_hba* pHba, struct scsi_host_template *sht)
{
- struct Scsi_Host *host = NULL;
+ struct Scsi_Host *host;
- host = scsi_register(sht, sizeof(adpt_hba*));
+ host = scsi_host_alloc(sht, sizeof(adpt_hba*));
if (host == NULL) {
- printk ("%s: scsi_register returned NULL\n",pHba->name);
+ printk("%s: scsi_host_alloc returned NULL\n", pHba->name);
return -1;
}
host->hostdata[0] = (unsigned long)pHba;
@@ -2200,7 +2418,7 @@
host->max_lun = 256;
host->max_channel = pHba->top_scsi_channel + 1;
host->cmd_per_lun = 1;
- host->unique_id = (uint) pHba;
+ host->unique_id = (u32)sys_tbl_pa + pHba->unit;
host->sg_tablesize = pHba->sg_tablesize;
host->can_queue = pHba->post_fifo_size;
@@ -2640,11 +2858,10 @@
static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba)
{
u8 *status;
+ dma_addr_t addr;
u32 __iomem *msg = NULL;
int i;
ulong timeout = jiffies + TMOUT_INITOUTBOUND*HZ;
- u32* ptr;
- u32 outbound_frame; // This had to be a 32 bit address
u32 m;
do {
@@ -2663,13 +2880,14 @@
msg=(u32 __iomem *)(pHba->msg_addr_virt+m);
- status = kzalloc(4, GFP_KERNEL|ADDR32);
+ status = dma_alloc_coherent(&pHba->pDev->dev, 4, &addr, GFP_KERNEL);
if (!status) {
adpt_send_nop(pHba, m);
printk(KERN_WARNING"%s: IOP reset failed - no free memory.\n",
pHba->name);
return -ENOMEM;
}
+ memset(status, 0, 4);
writel(EIGHT_WORD_MSG_SIZE| SGL_OFFSET_6, &msg[0]);
writel(I2O_CMD_OUTBOUND_INIT<<24 | HOST_TID<<12 | ADAPTER_TID, &msg[1]);
@@ -2678,7 +2896,7 @@
writel(4096, &msg[4]); /* Host page frame size */
writel((REPLY_FRAME_SIZE)<<16|0x80, &msg[5]); /* Outbound msg frame size and Initcode */
writel(0xD0000004, &msg[6]); /* Simple SG LE, EOB */
- writel(virt_to_bus(status), &msg[7]);
+ writel((u32)addr, &msg[7]);
writel(m, pHba->post_port);
wmb();
@@ -2693,6 +2911,10 @@
rmb();
if(time_after(jiffies,timeout)){
printk(KERN_WARNING"%s: Timeout Initializing\n",pHba->name);
+ /* We lose 4 bytes of "status" here, but we
+ cannot free these because controller may
+ awake and corrupt those bytes at any time */
+ /* dma_free_coherent(&pHba->pDev->dev, 4, status, addr); */
return -ETIMEDOUT;
}
schedule_timeout_uninterruptible(1);
@@ -2701,25 +2923,30 @@
// If the command was successful, fill the fifo with our reply
// message packets
if(*status != 0x04 /*I2O_EXEC_OUTBOUND_INIT_COMPLETE*/) {
- kfree(status);
+ dma_free_coherent(&pHba->pDev->dev, 4, status, addr);
return -2;
}
- kfree(status);
+ dma_free_coherent(&pHba->pDev->dev, 4, status, addr);
- kfree(pHba->reply_pool);
+ if(pHba->reply_pool != NULL) {
+ dma_free_coherent(&pHba->pDev->dev,
+ pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4,
+ pHba->reply_pool, pHba->reply_pool_pa);
+ }
- pHba->reply_pool = kzalloc(pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4, GFP_KERNEL|ADDR32);
+ pHba->reply_pool = dma_alloc_coherent(&pHba->pDev->dev,
+ pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4,
+ &pHba->reply_pool_pa, GFP_KERNEL);
if (!pHba->reply_pool) {
printk(KERN_ERR "%s: Could not allocate reply pool\n", pHba->name);
return -ENOMEM;
}
+ memset(pHba->reply_pool, 0 , pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4);
- ptr = pHba->reply_pool;
for(i = 0; i < pHba->reply_fifo_size; i++) {
- outbound_frame = (u32)virt_to_bus(ptr);
- writel(outbound_frame, pHba->reply_port);
+ writel(pHba->reply_pool_pa + (i * REPLY_FRAME_SIZE * 4),
+ pHba->reply_port);
wmb();
- ptr += REPLY_FRAME_SIZE;
}
adpt_i2o_status_get(pHba);
return 0;
@@ -2743,11 +2970,11 @@
u32 m;
u32 __iomem *msg;
u8 *status_block=NULL;
- ulong status_block_bus;
if(pHba->status_block == NULL) {
- pHba->status_block = (i2o_status_block*)
- kmalloc(sizeof(i2o_status_block),GFP_KERNEL|ADDR32);
+ pHba->status_block = dma_alloc_coherent(&pHba->pDev->dev,
+ sizeof(i2o_status_block),
+ &pHba->status_block_pa, GFP_KERNEL);
if(pHba->status_block == NULL) {
printk(KERN_ERR
"dpti%d: Get Status Block failed; Out of memory. \n",
@@ -2757,7 +2984,6 @@
}
memset(pHba->status_block, 0, sizeof(i2o_status_block));
status_block = (u8*)(pHba->status_block);
- status_block_bus = virt_to_bus(pHba->status_block);
timeout = jiffies+TMOUT_GETSTATUS*HZ;
do {
rmb();
@@ -2782,8 +3008,8 @@
writel(0, &msg[3]);
writel(0, &msg[4]);
writel(0, &msg[5]);
- writel(((u32)status_block_bus)&0xffffffff, &msg[6]);
- writel(0, &msg[7]);
+ writel( dma_low(pHba->status_block_pa), &msg[6]);
+ writel( dma_high(pHba->status_block_pa), &msg[7]);
writel(sizeof(i2o_status_block), &msg[8]); // 88 bytes
//post message
@@ -2812,7 +3038,17 @@
}
// Calculate the Scatter Gather list size
- pHba->sg_tablesize = (pHba->status_block->inbound_frame_size * 4 -40)/ sizeof(struct sg_simple_element);
+ if (dpt_dma64(pHba)) {
+ pHba->sg_tablesize
+ = ((pHba->status_block->inbound_frame_size * 4
+ - 14 * sizeof(u32))
+ / (sizeof(struct sg_simple_element) + sizeof(u32)));
+ } else {
+ pHba->sg_tablesize
+ = ((pHba->status_block->inbound_frame_size * 4
+ - 12 * sizeof(u32))
+ / sizeof(struct sg_simple_element));
+ }
if (pHba->sg_tablesize > SG_LIST_ELEMENTS) {
pHba->sg_tablesize = SG_LIST_ELEMENTS;
}
@@ -2863,7 +3099,9 @@
}
do {
if (pHba->lct == NULL) {
- pHba->lct = kmalloc(pHba->lct_size, GFP_KERNEL|ADDR32);
+ pHba->lct = dma_alloc_coherent(&pHba->pDev->dev,
+ pHba->lct_size, &pHba->lct_pa,
+ GFP_KERNEL);
if(pHba->lct == NULL) {
printk(KERN_CRIT "%s: Lct Get failed. Out of memory.\n",
pHba->name);
@@ -2879,7 +3117,7 @@
msg[4] = 0xFFFFFFFF; /* All devices */
msg[5] = 0x00000000; /* Report now */
msg[6] = 0xD0000000|pHba->lct_size;
- msg[7] = virt_to_bus(pHba->lct);
+ msg[7] = (u32)pHba->lct_pa;
if ((ret=adpt_i2o_post_wait(pHba, msg, sizeof(msg), 360))) {
printk(KERN_ERR "%s: LCT Get failed (status=%#10x.\n",
@@ -2890,7 +3128,8 @@
if ((pHba->lct->table_size << 2) > pHba->lct_size) {
pHba->lct_size = pHba->lct->table_size << 2;
- kfree(pHba->lct);
+ dma_free_coherent(&pHba->pDev->dev, pHba->lct_size,
+ pHba->lct, pHba->lct_pa);
pHba->lct = NULL;
}
} while (pHba->lct == NULL);
@@ -2901,13 +3140,19 @@
// I2O_DPT_EXEC_IOP_BUFFERS_GROUP_NO;
if(adpt_i2o_query_scalar(pHba, 0 , 0x8000, -1, buf, sizeof(buf))>=0) {
pHba->FwDebugBufferSize = buf[1];
- pHba->FwDebugBuffer_P = pHba->base_addr_virt + buf[0];
- pHba->FwDebugFlags_P = pHba->FwDebugBuffer_P + FW_DEBUG_FLAGS_OFFSET;
- pHba->FwDebugBLEDvalue_P = pHba->FwDebugBuffer_P + FW_DEBUG_BLED_OFFSET;
- pHba->FwDebugBLEDflag_P = pHba->FwDebugBLEDvalue_P + 1;
- pHba->FwDebugStrLength_P = pHba->FwDebugBuffer_P + FW_DEBUG_STR_LENGTH_OFFSET;
- pHba->FwDebugBuffer_P += buf[2];
- pHba->FwDebugFlags = 0;
+ pHba->FwDebugBuffer_P = ioremap(pHba->base_addr_phys + buf[0],
+ pHba->FwDebugBufferSize);
+ if (pHba->FwDebugBuffer_P) {
+ pHba->FwDebugFlags_P = pHba->FwDebugBuffer_P +
+ FW_DEBUG_FLAGS_OFFSET;
+ pHba->FwDebugBLEDvalue_P = pHba->FwDebugBuffer_P +
+ FW_DEBUG_BLED_OFFSET;
+ pHba->FwDebugBLEDflag_P = pHba->FwDebugBLEDvalue_P + 1;
+ pHba->FwDebugStrLength_P = pHba->FwDebugBuffer_P +
+ FW_DEBUG_STR_LENGTH_OFFSET;
+ pHba->FwDebugBuffer_P += buf[2];
+ pHba->FwDebugFlags = 0;
+ }
}
return 0;
@@ -2915,25 +3160,30 @@
static int adpt_i2o_build_sys_table(void)
{
- adpt_hba* pHba = NULL;
+ adpt_hba* pHba = hba_chain;
int count = 0;
+ if (sys_tbl)
+ dma_free_coherent(&pHba->pDev->dev, sys_tbl_len,
+ sys_tbl, sys_tbl_pa);
+
sys_tbl_len = sizeof(struct i2o_sys_tbl) + // Header + IOPs
(hba_count) * sizeof(struct i2o_sys_tbl_entry);
- kfree(sys_tbl);
-
- sys_tbl = kzalloc(sys_tbl_len, GFP_KERNEL|ADDR32);
+ sys_tbl = dma_alloc_coherent(&pHba->pDev->dev,
+ sys_tbl_len, &sys_tbl_pa, GFP_KERNEL);
if (!sys_tbl) {
printk(KERN_WARNING "SysTab Set failed. Out of memory.\n");
return -ENOMEM;
}
+ memset(sys_tbl, 0, sys_tbl_len);
sys_tbl->num_entries = hba_count;
sys_tbl->version = I2OVERSION;
sys_tbl->change_ind = sys_tbl_ind++;
for(pHba = hba_chain; pHba; pHba = pHba->next) {
+ u64 addr;
// Get updated Status Block so we have the latest information
if (adpt_i2o_status_get(pHba)) {
sys_tbl->num_entries--;
@@ -2949,8 +3199,9 @@
sys_tbl->iops[count].frame_size = pHba->status_block->inbound_frame_size;
sys_tbl->iops[count].last_changed = sys_tbl_ind - 1; // ??
sys_tbl->iops[count].iop_capabilities = pHba->status_block->iop_capabilities;
- sys_tbl->iops[count].inbound_low = (u32)virt_to_bus(pHba->post_port);
- sys_tbl->iops[count].inbound_high = (u32)((u64)virt_to_bus(pHba->post_port)>>32);
+ addr = pHba->base_addr_phys + 0x40;
+ sys_tbl->iops[count].inbound_low = dma_low(addr);
+ sys_tbl->iops[count].inbound_high = dma_high(addr);
count++;
}
@@ -3086,7 +3337,8 @@
do {
if (pHba->hrt == NULL) {
- pHba->hrt=kmalloc(size, GFP_KERNEL|ADDR32);
+ pHba->hrt = dma_alloc_coherent(&pHba->pDev->dev,
+ size, &pHba->hrt_pa, GFP_KERNEL);
if (pHba->hrt == NULL) {
printk(KERN_CRIT "%s: Hrt Get failed; Out of memory.\n", pHba->name);
return -ENOMEM;
@@ -3098,7 +3350,7 @@
msg[2]= 0;
msg[3]= 0;
msg[4]= (0xD0000000 | size); /* Simple transaction */
- msg[5]= virt_to_bus(pHba->hrt); /* Dump it here */
+ msg[5]= (u32)pHba->hrt_pa; /* Dump it here */
if ((ret = adpt_i2o_post_wait(pHba, msg, sizeof(msg),20))) {
printk(KERN_ERR "%s: Unable to get HRT (status=%#10x)\n", pHba->name, ret);
@@ -3106,8 +3358,10 @@
}
if (pHba->hrt->num_entries * pHba->hrt->entry_len << 2 > size) {
- size = pHba->hrt->num_entries * pHba->hrt->entry_len << 2;
- kfree(pHba->hrt);
+ int newsize = pHba->hrt->num_entries * pHba->hrt->entry_len << 2;
+ dma_free_coherent(&pHba->pDev->dev, size,
+ pHba->hrt, pHba->hrt_pa);
+ size = newsize;
pHba->hrt = NULL;
}
} while(pHba->hrt == NULL);
@@ -3121,33 +3375,54 @@
int group, int field, void *buf, int buflen)
{
u16 opblk[] = { 1, 0, I2O_PARAMS_FIELD_GET, group, 1, field };
- u8 *resblk;
+ u8 *opblk_va;
+ dma_addr_t opblk_pa;
+ u8 *resblk_va;
+ dma_addr_t resblk_pa;
int size;
/* 8 bytes for header */
- resblk = kmalloc(sizeof(u8) * (8+buflen), GFP_KERNEL|ADDR32);
- if (resblk == NULL) {
+ resblk_va = dma_alloc_coherent(&pHba->pDev->dev,
+ sizeof(u8) * (8 + buflen), &resblk_pa, GFP_KERNEL);
+ if (resblk_va == NULL) {
printk(KERN_CRIT "%s: query scalar failed; Out of memory.\n", pHba->name);
return -ENOMEM;
}
+ opblk_va = dma_alloc_coherent(&pHba->pDev->dev,
+ sizeof(opblk), &opblk_pa, GFP_KERNEL);
+ if (opblk_va == NULL) {
+ dma_free_coherent(&pHba->pDev->dev, sizeof(u8) * (8+buflen),
+ resblk_va, resblk_pa);
+ printk(KERN_CRIT "%s: query operatio failed; Out of memory.\n",
+ pHba->name);
+ return -ENOMEM;
+ }
if (field == -1) /* whole group */
opblk[4] = -1;
+ memcpy(opblk_va, opblk, sizeof(opblk));
size = adpt_i2o_issue_params(I2O_CMD_UTIL_PARAMS_GET, pHba, tid,
- opblk, sizeof(opblk), resblk, sizeof(u8)*(8+buflen));
+ opblk_va, opblk_pa, sizeof(opblk),
+ resblk_va, resblk_pa, sizeof(u8)*(8+buflen));
+ dma_free_coherent(&pHba->pDev->dev, sizeof(opblk), opblk_va, opblk_pa);
if (size == -ETIME) {
+ dma_free_coherent(&pHba->pDev->dev, sizeof(u8) * (8+buflen),
+ resblk_va, resblk_pa);
printk(KERN_WARNING "%s: issue params failed; Timed out.\n", pHba->name);
return -ETIME;
} else if (size == -EINTR) {
+ dma_free_coherent(&pHba->pDev->dev, sizeof(u8) * (8+buflen),
+ resblk_va, resblk_pa);
printk(KERN_WARNING "%s: issue params failed; Interrupted.\n", pHba->name);
return -EINTR;
}
- memcpy(buf, resblk+8, buflen); /* cut off header */
+ memcpy(buf, resblk_va+8, buflen); /* cut off header */
- kfree(resblk);
+ dma_free_coherent(&pHba->pDev->dev, sizeof(u8) * (8+buflen),
+ resblk_va, resblk_pa);
if (size < 0)
return size;
@@ -3164,10 +3439,11 @@
* ResultCount, ErrorInfoSize, BlockStatus and BlockSize.
*/
static int adpt_i2o_issue_params(int cmd, adpt_hba* pHba, int tid,
- void *opblk, int oplen, void *resblk, int reslen)
+ void *opblk_va, dma_addr_t opblk_pa, int oplen,
+ void *resblk_va, dma_addr_t resblk_pa, int reslen)
{
u32 msg[9];
- u32 *res = (u32 *)resblk;
+ u32 *res = (u32 *)resblk_va;
int wait_status;
msg[0] = NINE_WORD_MSG_SIZE | SGL_OFFSET_5;
@@ -3176,12 +3452,12 @@
msg[3] = 0;
msg[4] = 0;
msg[5] = 0x54000000 | oplen; /* OperationBlock */
- msg[6] = virt_to_bus(opblk);
+ msg[6] = (u32)opblk_pa;
msg[7] = 0xD0000000 | reslen; /* ResultBlock */
- msg[8] = virt_to_bus(resblk);
+ msg[8] = (u32)resblk_pa;
if ((wait_status = adpt_i2o_post_wait(pHba, msg, sizeof(msg), 20))) {
- printk("adpt_i2o_issue_params: post_wait failed (%p)\n", resblk);
+ printk("adpt_i2o_issue_params: post_wait failed (%p)\n", resblk_va);
return wait_status; /* -DetailedStatus */
}
@@ -3284,7 +3560,7 @@
* Private i/o space declaration
*/
msg[6] = 0x54000000 | sys_tbl_len;
- msg[7] = virt_to_phys(sys_tbl);
+ msg[7] = (u32)sys_tbl_pa;
msg[8] = 0x54000000 | 0;
msg[9] = 0;
msg[10] = 0xD4000000 | 0;
@@ -3323,11 +3599,10 @@
#endif
static struct scsi_host_template driver_template = {
+ .module = THIS_MODULE,
.name = "dpt_i2o",
.proc_name = "dpt_i2o",
.proc_info = adpt_proc_info,
- .detect = adpt_detect,
- .release = adpt_release,
.info = adpt_info,
.queuecommand = adpt_queue,
.eh_abort_handler = adpt_abort,
@@ -3341,5 +3616,48 @@
.cmd_per_lun = 1,
.use_clustering = ENABLE_CLUSTERING,
};
-#include "scsi_module.c"
+
+static int __init adpt_init(void)
+{
+ int error;
+ adpt_hba *pHba, *next;
+
+ printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n");
+
+ error = adpt_detect(&driver_template);
+ if (error < 0)
+ return error;
+ if (hba_chain == NULL)
+ return -ENODEV;
+
+ for (pHba = hba_chain; pHba; pHba = pHba->next) {
+ error = scsi_add_host(pHba->host, &pHba->pDev->dev);
+ if (error)
+ goto fail;
+ scsi_scan_host(pHba->host);
+ }
+ return 0;
+fail:
+ for (pHba = hba_chain; pHba; pHba = next) {
+ next = pHba->next;
+ scsi_remove_host(pHba->host);
+ }
+ return error;
+}
+
+static void __exit adpt_exit(void)
+{
+ adpt_hba *pHba, *next;
+
+ for (pHba = hba_chain; pHba; pHba = pHba->next)
+ scsi_remove_host(pHba->host);
+ for (pHba = hba_chain; pHba; pHba = next) {
+ next = pHba->next;
+ adpt_release(pHba->host);
+ }
+}
+
+module_init(adpt_init);
+module_exit(adpt_exit);
+
MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/dpti.h b/drivers/scsi/dpti.h
index fd79068..337746d 100644
--- a/drivers/scsi/dpti.h
+++ b/drivers/scsi/dpti.h
@@ -84,7 +84,6 @@
#define PCI_DPT_DEVICE_ID (0xA501) // DPT PCI I2O Device ID
#define PCI_DPT_RAPTOR_DEVICE_ID (0xA511)
-//#define REBOOT_NOTIFIER 1
/* Debugging macro from Linux Device Drivers - Rubini */
#undef PDEBUG
#ifdef DEBUG
@@ -229,14 +228,19 @@
u32 post_fifo_size;
u32 reply_fifo_size;
u32* reply_pool;
+ dma_addr_t reply_pool_pa;
u32 sg_tablesize; // Scatter/Gather List Size.
u8 top_scsi_channel;
u8 top_scsi_id;
u8 top_scsi_lun;
+ u8 dma64;
i2o_status_block* status_block;
+ dma_addr_t status_block_pa;
i2o_hrt* hrt;
+ dma_addr_t hrt_pa;
i2o_lct* lct;
+ dma_addr_t lct_pa;
uint lct_size;
struct i2o_device* devices;
struct adpt_channel channel[MAX_CHANNEL];
@@ -249,6 +253,7 @@
void __iomem *FwDebugBLEDflag_P;// Virtual Addr Of FW Debug BLED
void __iomem *FwDebugBLEDvalue_P;// Virtual Addr Of FW Debug BLED
u32 FwDebugFlags;
+ u32 *ioctl_reply_context[4];
} adpt_hba;
struct sg_simple_element {
@@ -264,9 +269,6 @@
static int adpt_init(void);
static int adpt_i2o_build_sys_table(void);
static irqreturn_t adpt_isr(int irq, void *dev_id);
-#ifdef REBOOT_NOTIFIER
-static int adpt_reboot_event(struct notifier_block *n, ulong code, void *p);
-#endif
static void adpt_i2o_report_hba_unit(adpt_hba* pHba, struct i2o_device *d);
static int adpt_i2o_query_scalar(adpt_hba* pHba, int tid,
@@ -275,7 +277,8 @@
static const char *adpt_i2o_get_class_name(int class);
#endif
static int adpt_i2o_issue_params(int cmd, adpt_hba* pHba, int tid,
- void *opblk, int oplen, void *resblk, int reslen);
+ void *opblk, dma_addr_t opblk_pa, int oplen,
+ void *resblk, dma_addr_t resblk_pa, int reslen);
static int adpt_i2o_post_wait(adpt_hba* pHba, u32* msg, int len, int timeout);
static int adpt_i2o_lct_get(adpt_hba* pHba);
static int adpt_i2o_parse_lct(adpt_hba* pHba);
@@ -289,7 +292,7 @@
static s32 adpt_i2o_hrt_get(adpt_hba* pHba);
static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_device* dptdevice);
static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd);
-static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht);
+static s32 adpt_scsi_host_alloc(adpt_hba* pHba,struct scsi_host_template * sht);
static s32 adpt_hba_reset(adpt_hba* pHba);
static s32 adpt_i2o_reset_hba(adpt_hba* pHba);
static s32 adpt_rescan(adpt_hba* pHba);
@@ -313,19 +316,6 @@
static void adpt_delay(int millisec);
#endif
-#if defined __ia64__
-static void adpt_ia64_info(sysInfo_S* si);
-#endif
-#if defined __sparc__
-static void adpt_sparc_info(sysInfo_S* si);
-#endif
-#if defined __alpha__
-static void adpt_sparc_info(sysInfo_S* si);
-#endif
-#if defined __i386__
-static void adpt_i386_info(sysInfo_S* si);
-#endif
-
#define PRINT_BUFFER_SIZE 512
#define HBA_FLAGS_DBG_FLAGS_MASK 0xffff0000 // Mask for debug flags
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index c6d6e7c6..46771d4 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -465,7 +465,7 @@
scp->request = (struct request *)&wait;
scp->timeout_per_command = timeout*HZ;
scp->cmd_len = 12;
- memcpy(scp->cmnd, cmnd, 12);
+ scp->cmnd = cmnd;
cmndinfo.priority = IOCTL_PRI;
cmndinfo.internal_cmd_str = gdtcmd;
cmndinfo.internal_command = 1;
@@ -550,7 +550,6 @@
#endif /* CONFIG_ISA */
#ifdef CONFIG_PCI
-static bool gdth_pci_registered;
static bool gdth_search_vortex(ushort device)
{
@@ -3724,6 +3723,8 @@
}
#ifdef GDTH_STATISTICS
+static unchar gdth_timer_running;
+
static void gdth_timeout(ulong data)
{
ulong32 i;
@@ -3731,7 +3732,10 @@
gdth_ha_str *ha;
ulong flags;
- BUG_ON(list_empty(&gdth_instances));
+ if(unlikely(list_empty(&gdth_instances))) {
+ gdth_timer_running = 0;
+ return;
+ }
ha = list_first_entry(&gdth_instances, gdth_ha_str, list);
spin_lock_irqsave(&ha->smp_lock, flags);
@@ -3751,6 +3755,22 @@
add_timer(&gdth_timer);
spin_unlock_irqrestore(&ha->smp_lock, flags);
}
+
+static void gdth_timer_init(void)
+{
+ if (gdth_timer_running)
+ return;
+ gdth_timer_running = 1;
+ TRACE2(("gdth_detect(): Initializing timer !\n"));
+ gdth_timer.expires = jiffies + HZ;
+ gdth_timer.data = 0L;
+ gdth_timer.function = gdth_timeout;
+ add_timer(&gdth_timer);
+}
+#else
+static inline void gdth_timer_init(void)
+{
+}
#endif
static void __init internal_setup(char *str,int *ints)
@@ -4735,6 +4755,7 @@
if (error)
goto out_free_coal_stat;
list_add_tail(&ha->list, &gdth_instances);
+ gdth_timer_init();
scsi_scan_host(shp);
@@ -4865,6 +4886,7 @@
if (error)
goto out_free_coal_stat;
list_add_tail(&ha->list, &gdth_instances);
+ gdth_timer_init();
scsi_scan_host(shp);
@@ -5011,6 +5033,7 @@
list_add_tail(&ha->list, &gdth_instances);
pci_set_drvdata(ha->pdev, ha);
+ gdth_timer_init();
scsi_scan_host(shp);
@@ -5110,6 +5133,7 @@
/* initializations */
gdth_polling = TRUE;
gdth_clear_events();
+ init_timer(&gdth_timer);
/* As default we do not probe for EISA or ISA controllers */
if (probe_eisa_isa) {
@@ -5132,23 +5156,17 @@
#ifdef CONFIG_PCI
/* scanning for PCI controllers */
- if (pci_register_driver(&gdth_pci_driver) == 0)
- gdth_pci_registered = true;
+ if (pci_register_driver(&gdth_pci_driver)) {
+ gdth_ha_str *ha;
+
+ list_for_each_entry(ha, &gdth_instances, list)
+ gdth_remove_one(ha);
+ return -ENODEV;
+ }
#endif /* CONFIG_PCI */
TRACE2(("gdth_detect() %d controller detected\n", gdth_ctr_count));
- if (list_empty(&gdth_instances))
- return -ENODEV;
-
-#ifdef GDTH_STATISTICS
- TRACE2(("gdth_detect(): Initializing timer !\n"));
- init_timer(&gdth_timer);
- gdth_timer.expires = jiffies + HZ;
- gdth_timer.data = 0L;
- gdth_timer.function = gdth_timeout;
- add_timer(&gdth_timer);
-#endif
major = register_chrdev(0,"gdth", &gdth_fops);
register_reboot_notifier(&gdth_notifier);
gdth_polling = FALSE;
@@ -5167,8 +5185,7 @@
#endif
#ifdef CONFIG_PCI
- if (gdth_pci_registered)
- pci_unregister_driver(&gdth_pci_driver);
+ pci_unregister_driver(&gdth_pci_driver);
#endif
list_for_each_entry(ha, &gdth_instances, list)
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index 5b7be1e..aaa48e0 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -763,9 +763,9 @@
scp,
host->host_no, scp->device->channel,
scp->device->id, scp->device->lun,
- *((u32 *)&scp->cmnd),
- *((u32 *)&scp->cmnd + 1),
- *((u32 *)&scp->cmnd + 2),
+ ((u32 *)scp->cmnd)[0],
+ ((u32 *)scp->cmnd)[1],
+ ((u32 *)scp->cmnd)[2],
_req->index, _req->req_virt);
scp->result = 0;
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 4a922c5..ccfd8ac 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -686,7 +686,7 @@
}
if (cmnd) {
- cmnd->result = rsp->status;
+ cmnd->result |= rsp->status;
if (((cmnd->result >> 1) & 0x1f) == CHECK_CONDITION)
memcpy(cmnd->sense_buffer,
rsp->data,
@@ -730,6 +730,7 @@
u16 lun = lun_from_dev(cmnd->device);
u8 out_fmt, in_fmt;
+ cmnd->result = (DID_OK << 16);
evt_struct = get_event_struct(&hostdata->pool);
if (!evt_struct)
return SCSI_MLQUEUE_HOST_BUSY;
@@ -738,7 +739,7 @@
srp_cmd = &evt_struct->iu.srp.cmd;
memset(srp_cmd, 0x00, SRP_MAX_IU_LEN);
srp_cmd->opcode = SRP_CMD;
- memcpy(srp_cmd->cdb, cmnd->cmnd, sizeof(cmnd->cmnd));
+ memcpy(srp_cmd->cdb, cmnd->cmnd, sizeof(srp_cmd->cdb));
srp_cmd->lun = ((u64) lun) << 48;
if (!map_data_for_srp_cmd(cmnd, evt_struct, srp_cmd, hostdata->dev)) {
@@ -1347,6 +1348,8 @@
del_timer(&evt_struct->timer);
+ if (crq->status != VIOSRP_OK && evt_struct->cmnd)
+ evt_struct->cmnd->result = DID_ERROR << 16;
if (evt_struct->done)
evt_struct->done(evt_struct);
else
diff --git a/drivers/scsi/ibmvscsi/viosrp.h b/drivers/scsi/ibmvscsi/viosrp.h
index 90f1a612..4c4aadb 100644
--- a/drivers/scsi/ibmvscsi/viosrp.h
+++ b/drivers/scsi/ibmvscsi/viosrp.h
@@ -59,6 +59,15 @@
VIOSRP_INLINE_FORMAT = 0x07
};
+enum viosrp_crq_status {
+ VIOSRP_OK = 0x0,
+ VIOSRP_NONRECOVERABLE_ERR = 0x1,
+ VIOSRP_VIOLATES_MAX_XFER = 0x2,
+ VIOSRP_PARTNER_PANIC = 0x3,
+ VIOSRP_DEVICE_BUSY = 0x8,
+ VIOSRP_ADAPTER_FAIL = 0x10
+};
+
struct viosrp_crq {
u8 valid; /* used by RPA */
u8 format; /* SCSI vs out-of-band */
diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c
index dbae3fd..e3f7397 100644
--- a/drivers/scsi/initio.c
+++ b/drivers/scsi/initio.c
@@ -2590,7 +2590,7 @@
cblk->hastat = 0;
cblk->tastat = 0;
/* Command the command */
- memcpy(&cblk->cdb[0], &cmnd->cmnd, cmnd->cmd_len);
+ memcpy(cblk->cdb, cmnd->cmnd, cmnd->cmd_len);
/* Set up tags */
if (cmnd->device->tagged_supported) { /* Tag Support */
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index de5ae6a..999e91e 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -2791,7 +2791,7 @@
static struct device_attribute ipr_ioa_state_attr = {
.attr = {
- .name = "state",
+ .name = "online_state",
.mode = S_IRUGO | S_IWUSR,
},
.show = ipr_show_adapter_state,
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 010c1b9..b43bf1d 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -730,7 +730,9 @@
if (iscsi_recv_pdu(conn->cls_conn, hdr, data,
datalen))
rc = ISCSI_ERR_CONN_FAILED;
- }
+ } else
+ mod_timer(&conn->transport_timer,
+ jiffies + conn->recv_timeout);
iscsi_free_mgmt_task(conn, mtask);
break;
default:
@@ -1453,19 +1455,20 @@
{
struct iscsi_conn *conn = (struct iscsi_conn *)data;
struct iscsi_session *session = conn->session;
- unsigned long timeout, next_timeout = 0, last_recv;
+ unsigned long recv_timeout, next_timeout = 0, last_recv;
spin_lock(&session->lock);
if (session->state != ISCSI_STATE_LOGGED_IN)
goto done;
- timeout = conn->recv_timeout;
- if (!timeout)
+ recv_timeout = conn->recv_timeout;
+ if (!recv_timeout)
goto done;
- timeout *= HZ;
+ recv_timeout *= HZ;
last_recv = conn->last_recv;
- if (time_before_eq(last_recv + timeout + (conn->ping_timeout * HZ),
+ if (conn->ping_mtask &&
+ time_before_eq(conn->last_ping + (conn->ping_timeout * HZ),
jiffies)) {
iscsi_conn_printk(KERN_ERR, conn, "ping timeout of %d secs "
"expired, last rx %lu, last ping %lu, "
@@ -1476,15 +1479,13 @@
return;
}
- if (time_before_eq(last_recv + timeout, jiffies)) {
- if (time_before_eq(conn->last_ping, last_recv)) {
- /* send a ping to try to provoke some traffic */
- debug_scsi("Sending nopout as ping on conn %p\n", conn);
- iscsi_send_nopout(conn, NULL);
- }
- next_timeout = last_recv + timeout + (conn->ping_timeout * HZ);
+ if (time_before_eq(last_recv + recv_timeout, jiffies)) {
+ /* send a ping to try to provoke some traffic */
+ debug_scsi("Sending nopout as ping on conn %p\n", conn);
+ iscsi_send_nopout(conn, NULL);
+ next_timeout = conn->last_ping + (conn->ping_timeout * HZ);
} else
- next_timeout = last_recv + timeout;
+ next_timeout = last_recv + recv_timeout;
debug_scsi("Setting next tmo %lu\n", next_timeout);
mod_timer(&conn->transport_timer, next_timeout);
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 820f91f..70a0f11 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -3168,6 +3168,23 @@
uint8_t raw_mbox[sizeof(mbox_t)];
int rval;
+ /*
+ * Newer firmware on Dell CERC expect a different
+ * random deletion handling, so disable it.
+ */
+ if (adapter->pdev->vendor == PCI_VENDOR_ID_AMI &&
+ adapter->pdev->device == PCI_DEVICE_ID_AMI_MEGARAID3 &&
+ adapter->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL &&
+ adapter->pdev->subsystem_device == PCI_SUBSYS_ID_CERC_ATA100_4CH &&
+ (adapter->fw_version[0] > '6' ||
+ (adapter->fw_version[0] == '6' &&
+ adapter->fw_version[2] > '6') ||
+ (adapter->fw_version[0] == '6'
+ && adapter->fw_version[2] == '6'
+ && adapter->fw_version[3] > '1'))) {
+ con_log(CL_DLEVEL1, ("megaraid: disable random deletion\n"));
+ return 0;
+ }
mbox = (mbox_t *)raw_mbox;
diff --git a/drivers/scsi/megaraid/megaraid_mbox.h b/drivers/scsi/megaraid/megaraid_mbox.h
index 626459d..c1d86d9 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.h
+++ b/drivers/scsi/megaraid/megaraid_mbox.h
@@ -88,6 +88,7 @@
#define PCI_SUBSYS_ID_PERC3_QC 0x0471
#define PCI_SUBSYS_ID_PERC3_DC 0x0493
#define PCI_SUBSYS_ID_PERC3_SC 0x0475
+#define PCI_SUBSYS_ID_CERC_ATA100_4CH 0x0511
#define MBOX_MAX_SCSI_CMDS 128 // number of cmds reserved for kernel
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index b937e9c..7d84c8b 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -10,7 +10,7 @@
* 2 of the License, or (at your option) any later version.
*
* FILE : megaraid_sas.c
- * Version : v00.00.03.16-rc1
+ * Version : v00.00.03.20-rc1
*
* Authors:
* (email-id : megaraidlinux@lsi.com)
@@ -2650,12 +2650,13 @@
return;
}
+#ifdef CONFIG_PM
/**
* megasas_suspend - driver suspend entry point
* @pdev: PCI device structure
* @state: PCI power state to suspend routine
*/
-static int __devinit
+static int
megasas_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct Scsi_Host *host;
@@ -2687,7 +2688,7 @@
* megasas_resume- driver resume entry point
* @pdev: PCI device structure
*/
-static int __devinit
+static int
megasas_resume(struct pci_dev *pdev)
{
int rval;
@@ -2782,12 +2783,16 @@
return -ENODEV;
}
+#else
+#define megasas_suspend NULL
+#define megasas_resume NULL
+#endif
/**
* megasas_detach_one - PCI hot"un"plug entry point
* @pdev: PCI device structure
*/
-static void megasas_detach_one(struct pci_dev *pdev)
+static void __devexit megasas_detach_one(struct pci_dev *pdev)
{
int i;
struct Scsi_Host *host;
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 3a997eb..b0c41e6 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -18,9 +18,9 @@
/*
* MegaRAID SAS Driver meta data
*/
-#define MEGASAS_VERSION "00.00.03.16-rc1"
-#define MEGASAS_RELDATE "Nov. 07, 2007"
-#define MEGASAS_EXT_VERSION "Thu. Nov. 07 10:09:32 PDT 2007"
+#define MEGASAS_VERSION "00.00.03.20-rc1"
+#define MEGASAS_RELDATE "March 10, 2008"
+#define MEGASAS_EXT_VERSION "Mon. March 10 11:02:31 PDT 2008"
/*
* Device IDs
diff --git a/drivers/scsi/mvsas.c b/drivers/scsi/mvsas.c
index e55b903..1dd70d7 100644
--- a/drivers/scsi/mvsas.c
+++ b/drivers/scsi/mvsas.c
@@ -2822,7 +2822,9 @@
dev_printk(KERN_DEBUG, &pdev->dev,
"phy[%d] Get Attached Address 0x%llX ,"
" SAS Address 0x%llX\n",
- i, phy->att_dev_sas_addr, phy->dev_sas_addr);
+ i,
+ (unsigned long long)phy->att_dev_sas_addr,
+ (unsigned long long)phy->dev_sas_addr);
dev_printk(KERN_DEBUG, &pdev->dev,
"Rate = %x , type = %d\n",
sas_phy->linkrate, phy->phy_type);
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index ceab4f73..c57c94c 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -8222,7 +8222,7 @@
#ifdef DEBUG_WAITING_LIST
if (waiting_list) printk("%s: waiting_list=%lx processing sts=%d\n", ncr_name(np), (u_long) waiting_list, sts);
#endif
- while (wcmd = waiting_list) {
+ while ((wcmd = waiting_list) != NULL) {
waiting_list = (struct scsi_cmnd *) wcmd->next_wcmd;
wcmd->next_wcmd = NULL;
if (sts == DID_OK) {
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 09ab3ea..51e2f29 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -2007,7 +2007,7 @@
nv->bus[bus].config_2.req_ack_active_negation = 1;
nv->bus[bus].config_2.data_line_active_negation = 1;
nv->bus[bus].selection_timeout = 250;
- nv->bus[bus].max_queue_depth = 256;
+ nv->bus[bus].max_queue_depth = 32;
if (IS_ISP1040(ha)) {
nv->bus[bus].bus_reset_delay = 3;
@@ -2051,7 +2051,7 @@
status = qla1280_mailbox_command(ha, 0x0f, mb);
/* Save Tag queuing enable flag. */
- flag = (BIT_0 << target) & mb[0];
+ flag = (BIT_0 << target);
if (nv->bus[bus].target[target].parameter.tag_queuing)
ha->bus_settings[bus].qtag_enables |= flag;
@@ -2858,7 +2858,7 @@
/* Load SCSI command packet. */
pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd));
- memcpy(pkt->scsi_cdb, &(CMD_CDBP(cmd)), CMD_CDBLEN(cmd));
+ memcpy(pkt->scsi_cdb, CMD_CDBP(cmd), CMD_CDBLEN(cmd));
/* dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */
/* Set transfer direction. */
@@ -3127,7 +3127,7 @@
/* Load SCSI command packet. */
pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd));
- memcpy(pkt->scsi_cdb, &(CMD_CDBP(cmd)), CMD_CDBLEN(cmd));
+ memcpy(pkt->scsi_cdb, CMD_CDBP(cmd), CMD_CDBLEN(cmd));
/*dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */
/* Set transfer direction. */
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 12d69d7..110e776 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -79,15 +79,6 @@
#define MIN_RESET_PERIOD (15*HZ)
/*
- * Macro to determine the size of SCSI command. This macro takes vendor
- * unique commands into account. SCSI commands in groups 6 and 7 are
- * vendor unique and we will depend upon the command length being
- * supplied correctly in cmd_len.
- */
-#define CDB_SIZE(cmd) (((((cmd)->cmnd[0] >> 5) & 7) < 6) ? \
- COMMAND_SIZE((cmd)->cmnd[0]) : (cmd)->cmd_len)
-
-/*
* Note - the initial logging level can be set here to log events at boot time.
* After the system is up, you may enable logging via the /proc interface.
*/
@@ -469,6 +460,7 @@
cmd = scsi_pool_alloc_command(shost->cmd_pool, gfp_mask);
if (!cmd) {
scsi_put_host_cmd_pool(gfp_mask);
+ shost->cmd_pool = NULL;
return -ENOMEM;
}
list_add(&cmd->list, &shost->free_list);
@@ -481,6 +473,13 @@
*/
void scsi_destroy_command_freelist(struct Scsi_Host *shost)
{
+ /*
+ * If cmd_pool is NULL the free list was not initialized, so
+ * do not attempt to release resources.
+ */
+ if (!shost->cmd_pool)
+ return;
+
while (!list_empty(&shost->free_list)) {
struct scsi_cmnd *cmd;
@@ -701,9 +700,11 @@
* Before we queue this command, check if the command
* length exceeds what the host adapter can handle.
*/
- if (CDB_SIZE(cmd) > cmd->device->host->max_cmd_len) {
+ if (cmd->cmd_len > cmd->device->host->max_cmd_len) {
SCSI_LOG_MLQUEUE(3,
- printk("queuecommand : command too long.\n"));
+ printk("queuecommand : command too long. "
+ "cdb_size=%d host->max_cmd_len=%d\n",
+ cmd->cmd_len, cmd->device->host->max_cmd_len));
cmd->result = (DID_ABORT << 16);
scsi_done(cmd);
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 1eaba6c..eaf5a8a 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -626,7 +626,7 @@
* @scmd: SCSI command structure to hijack
* @ses: structure to save restore information
* @cmnd: CDB to send. Can be NULL if no new cmnd is needed
- * @cmnd_size: size in bytes of @cmnd
+ * @cmnd_size: size in bytes of @cmnd (must be <= BLK_MAX_CDB)
* @sense_bytes: size of sense data to copy. or 0 (if != 0 @cmnd is ignored)
*
* This function is used to save a scsi command information before re-execution
@@ -648,12 +648,14 @@
* command.
*/
ses->cmd_len = scmd->cmd_len;
- memcpy(ses->cmnd, scmd->cmnd, sizeof(scmd->cmnd));
+ ses->cmnd = scmd->cmnd;
ses->data_direction = scmd->sc_data_direction;
ses->sdb = scmd->sdb;
ses->next_rq = scmd->request->next_rq;
ses->result = scmd->result;
+ scmd->cmnd = ses->eh_cmnd;
+ memset(scmd->cmnd, 0, BLK_MAX_CDB);
memset(&scmd->sdb, 0, sizeof(scmd->sdb));
scmd->request->next_rq = NULL;
@@ -665,14 +667,13 @@
scmd->sdb.table.sgl = &ses->sense_sgl;
scmd->sc_data_direction = DMA_FROM_DEVICE;
scmd->sdb.table.nents = 1;
- memset(scmd->cmnd, 0, sizeof(scmd->cmnd));
scmd->cmnd[0] = REQUEST_SENSE;
scmd->cmnd[4] = scmd->sdb.length;
scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
} else {
scmd->sc_data_direction = DMA_NONE;
if (cmnd) {
- memset(scmd->cmnd, 0, sizeof(scmd->cmnd));
+ BUG_ON(cmnd_size > BLK_MAX_CDB);
memcpy(scmd->cmnd, cmnd, cmnd_size);
scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
}
@@ -705,7 +706,7 @@
* Restore original data
*/
scmd->cmd_len = ses->cmd_len;
- memcpy(scmd->cmnd, ses->cmnd, sizeof(scmd->cmnd));
+ scmd->cmnd = ses->cmnd;
scmd->sc_data_direction = ses->data_direction;
scmd->sdb = ses->sdb;
scmd->request->next_rq = ses->next_rq;
@@ -1775,8 +1776,8 @@
scmd->request = &req;
memset(&scmd->eh_timeout, 0, sizeof(scmd->eh_timeout));
- memset(&scmd->cmnd, '\0', sizeof(scmd->cmnd));
-
+ scmd->cmnd = req.cmd;
+
scmd->scsi_done = scsi_reset_provider_done_command;
memset(&scmd->sdb, 0, sizeof(scmd->sdb));
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index d545ad1..a82d2fe 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -445,7 +445,7 @@
scsi_set_resid(cmd, 0);
memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
if (cmd->cmd_len == 0)
- cmd->cmd_len = COMMAND_SIZE(cmd->cmnd[0]);
+ cmd->cmd_len = scsi_command_size(cmd->cmnd);
}
void scsi_device_unbusy(struct scsi_device *sdev)
@@ -1094,6 +1094,8 @@
cmd->tag = req->tag;
cmd->request = req;
+ cmd->cmnd = req->cmd;
+
return cmd;
}
@@ -1131,8 +1133,6 @@
req->buffer = NULL;
}
- BUILD_BUG_ON(sizeof(req->cmd) > sizeof(cmd->cmnd));
- memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd));
cmd->cmd_len = req->cmd_len;
if (!req->data_len)
cmd->sc_data_direction = DMA_NONE;
@@ -1169,6 +1169,7 @@
if (unlikely(!cmd))
return BLKPREP_DEFER;
+ memset(cmd->cmnd, 0, BLK_MAX_CDB);
return scsi_init_io(cmd, GFP_ATOMIC);
}
EXPORT_SYMBOL(scsi_setup_fs_cmnd);
diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c
index ee8496a..257e097 100644
--- a/drivers/scsi/scsi_tgt_lib.c
+++ b/drivers/scsi/scsi_tgt_lib.c
@@ -107,6 +107,8 @@
cmd->jiffies_at_alloc = jiffies;
cmd->request = rq;
+ cmd->cmnd = rq->cmd;
+
rq->special = cmd;
rq->cmd_type = REQ_TYPE_SPECIAL;
rq->cmd_flags |= REQ_TYPE_BLOCK_PC;
diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c
index 640333b..329eb87 100644
--- a/drivers/scsi/u14-34f.c
+++ b/drivers/scsi/u14-34f.c
@@ -744,7 +744,8 @@
static int board_inquiry(unsigned int j) {
struct mscp *cpp;
dma_addr_t id_dma_addr;
- unsigned int time, limit = 0;
+ unsigned int limit = 0;
+ unsigned long time;
id_dma_addr = pci_map_single(HD(j)->pdev, HD(j)->board_id,
sizeof(HD(j)->board_id), PCI_DMA_BIDIRECTIONAL);
@@ -1392,7 +1393,8 @@
}
static int u14_34f_eh_host_reset(struct scsi_cmnd *SCarg) {
- unsigned int i, j, time, k, c, limit = 0;
+ unsigned int i, j, k, c, limit = 0;
+ unsigned long time;
int arg_done = FALSE;
struct scsi_cmnd *SCpnt;
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index ea41f262..a1ca9b7b 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2271,7 +2271,8 @@
}
if (up->port.flags & UPF_IOREMAP) {
- up->port.membase = ioremap(up->port.mapbase, size);
+ up->port.membase = ioremap_nocache(up->port.mapbase,
+ size);
if (!up->port.membase) {
release_mem_region(up->port.mapbase, size);
ret = -ENOMEM;
diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c
index cd89870..f279745 100644
--- a/drivers/serial/8250_early.c
+++ b/drivers/serial/8250_early.c
@@ -153,7 +153,7 @@
(void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
port->membase += port->mapbase & ~PAGE_MASK;
#else
- port->membase = ioremap(port->mapbase, 64);
+ port->membase = ioremap_nocache(port->mapbase, 64);
if (!port->membase) {
printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n",
__func__,
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 6e57382..53fa19c 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -86,7 +86,7 @@
len = pci_resource_len(dev, bar);
if (!priv->remapped_bar[bar])
- priv->remapped_bar[bar] = ioremap(base, len);
+ priv->remapped_bar[bar] = ioremap_nocache(base, len);
if (!priv->remapped_bar[bar])
return -ENOMEM;
@@ -270,7 +270,7 @@
/*
* enable/disable interrupts
*/
- p = ioremap(pci_resource_start(dev, 0), 0x80);
+ p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
if (p == NULL)
return -ENOMEM;
writel(irq_config, p + 0x4c);
@@ -294,7 +294,7 @@
/*
* disable interrupts
*/
- p = ioremap(pci_resource_start(dev, 0), 0x80);
+ p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
if (p != NULL) {
writel(0, p + 0x4c);
@@ -341,7 +341,8 @@
{
u8 __iomem *p;
- p = ioremap(pci_resource_start(dev, 0), pci_resource_len(dev, 0));
+ p = ioremap_nocache(pci_resource_start(dev, 0),
+ pci_resource_len(dev, 0));
if (p == NULL)
return -ENOMEM;
@@ -365,7 +366,8 @@
{
u8 __iomem *p;
- p = ioremap(pci_resource_start(dev, 0), pci_resource_len(dev, 0));
+ p = ioremap_nocache(pci_resource_start(dev, 0),
+ pci_resource_len(dev, 0));
/* FIXME: What if resource_len < OCT_REG_CR_OFF */
if (p != NULL)
writeb(0, p + OCT_REG_CR_OFF);
@@ -419,7 +421,7 @@
break;
}
- p = ioremap(pci_resource_start(dev, 0), 0x80);
+ p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
if (p == NULL)
return -ENOMEM;
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 8a2f6a1..d6b4ead 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -65,9 +65,6 @@
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
struct circ_buf *xmit = &uart->port.info->xmit;
-#if !defined(CONFIG_BF54x) && !defined(CONFIG_SERIAL_BFIN_DMA)
- unsigned short ier;
-#endif
while (!(UART_GET_LSR(uart) & TEMT))
cpu_relax();
@@ -82,12 +79,8 @@
#ifdef CONFIG_BF54x
/* Clear TFI bit */
UART_PUT_LSR(uart, TFI);
- UART_CLEAR_IER(uart, ETBEI);
-#else
- ier = UART_GET_IER(uart);
- ier &= ~ETBEI;
- UART_PUT_IER(uart, ier);
#endif
+ UART_CLEAR_IER(uart, ETBEI);
#endif
}
@@ -102,14 +95,7 @@
if (uart->tx_done)
bfin_serial_dma_tx_chars(uart);
#else
-#ifdef CONFIG_BF54x
UART_SET_IER(uart, ETBEI);
-#else
- unsigned short ier;
- ier = UART_GET_IER(uart);
- ier |= ETBEI;
- UART_PUT_IER(uart, ier);
-#endif
bfin_serial_tx_chars(uart);
#endif
}
@@ -120,21 +106,10 @@
static void bfin_serial_stop_rx(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
-#ifdef CONFIG_KGDB_UART
- if (uart->port.line != CONFIG_KGDB_UART_PORT) {
+#ifdef CONFIG_KGDB_UART
+ if (uart->port.line != CONFIG_KGDB_UART_PORT)
#endif
-#ifdef CONFIG_BF54x
UART_CLEAR_IER(uart, ERBFI);
-#else
- unsigned short ier;
-
- ier = UART_GET_IER(uart);
- ier &= ~ERBFI;
- UART_PUT_IER(uart, ier);
-#endif
-#ifdef CONFIG_KGDB_UART
- }
-#endif
}
/*
@@ -161,10 +136,7 @@
SSYNC();
}
-#ifndef CONFIG_BF54x
- UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB));
- SSYNC();
-#endif
+ UART_CLEAR_DLAB(uart);
UART_PUT_CHAR(uart, (unsigned char)chr);
SSYNC();
}
@@ -183,10 +155,7 @@
while(!(UART_GET_LSR(uart) & DR)) {
SSYNC();
}
-#ifndef CONFIG_BF54x
- UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB));
- SSYNC();
-#endif
+ UART_CLEAR_DLAB(uart);
chr = UART_GET_CHAR(uart);
SSYNC();
@@ -208,9 +177,6 @@
struct tty_struct *tty = uart->port.info->tty;
unsigned int status, ch, flg;
static struct timeval anomaly_start = { .tv_sec = 0 };
-#ifdef CONFIG_KGDB_UART
- struct pt_regs *regs = get_irq_regs();
-#endif
status = UART_GET_LSR(uart);
UART_CLEAR_LSR(uart);
@@ -220,6 +186,7 @@
#ifdef CONFIG_KGDB_UART
if (uart->port.line == CONFIG_KGDB_UART_PORT) {
+ struct pt_regs *regs = get_irq_regs();
if (uart->port.cons->index == CONFIG_KGDB_UART_PORT && ch == 0x1) { /* Ctrl + A */
kgdb_breakkey_pressed(regs);
return;
@@ -391,7 +358,6 @@
static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
{
struct circ_buf *xmit = &uart->port.info->xmit;
- unsigned short ier;
uart->tx_done = 0;
@@ -429,13 +395,7 @@
set_dma_x_modify(uart->tx_dma_channel, 1);
enable_dma(uart->tx_dma_channel);
-#ifdef CONFIG_BF54x
UART_SET_IER(uart, ETBEI);
-#else
- ier = UART_GET_IER(uart);
- ier |= ETBEI;
- UART_PUT_IER(uart, ier);
-#endif
}
static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
@@ -513,19 +473,12 @@
{
struct bfin_serial_port *uart = dev_id;
struct circ_buf *xmit = &uart->port.info->xmit;
- unsigned short ier;
spin_lock(&uart->port.lock);
if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
disable_dma(uart->tx_dma_channel);
clear_dma_irqstat(uart->tx_dma_channel);
-#ifdef CONFIG_BF54x
UART_CLEAR_IER(uart, ETBEI);
-#else
- ier = UART_GET_IER(uart);
- ier &= ~ETBEI;
- UART_PUT_IER(uart, ier);
-#endif
xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
uart->port.icount.tx += uart->tx_count;
@@ -701,7 +654,6 @@
# endif
}
-
if (request_irq
(uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED,
"BFIN_UART_TX", uart)) {
@@ -710,11 +662,7 @@
return -EBUSY;
}
#endif
-#ifdef CONFIG_BF54x
UART_SET_IER(uart, ERBFI);
-#else
- UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI);
-#endif
return 0;
}
@@ -810,26 +758,15 @@
UART_PUT_IER(uart, 0);
#endif
-#ifndef CONFIG_BF54x
/* Set DLAB in LCR to Access DLL and DLH */
- val = UART_GET_LCR(uart);
- val |= DLAB;
- UART_PUT_LCR(uart, val);
- SSYNC();
-#endif
+ UART_SET_DLAB(uart);
UART_PUT_DLL(uart, quot & 0xFF);
- SSYNC();
UART_PUT_DLH(uart, (quot >> 8) & 0xFF);
SSYNC();
-#ifndef CONFIG_BF54x
/* Clear DLAB in LCR to Access THR RBR IER */
- val = UART_GET_LCR(uart);
- val &= ~DLAB;
- UART_PUT_LCR(uart, val);
- SSYNC();
-#endif
+ UART_CLEAR_DLAB(uart);
UART_PUT_LCR(uart, lcr);
@@ -992,8 +929,7 @@
status = UART_GET_IER(uart) & (ERBFI | ETBEI);
if (status == (ERBFI | ETBEI)) {
/* ok, the port was enabled */
- unsigned short lcr, val;
- unsigned short dlh, dll;
+ u16 lcr, dlh, dll;
lcr = UART_GET_LCR(uart);
@@ -1010,22 +946,14 @@
case 2: *bits = 7; break;
case 3: *bits = 8; break;
}
-#ifndef CONFIG_BF54x
/* Set DLAB in LCR to Access DLL and DLH */
- val = UART_GET_LCR(uart);
- val |= DLAB;
- UART_PUT_LCR(uart, val);
-#endif
+ UART_SET_DLAB(uart);
dll = UART_GET_DLL(uart);
dlh = UART_GET_DLH(uart);
-#ifndef CONFIG_BF54x
/* Clear DLAB in LCR to Access THR RBR IER */
- val = UART_GET_LCR(uart);
- val &= ~DLAB;
- UART_PUT_LCR(uart, val);
-#endif
+ UART_CLEAR_DLAB(uart);
*baud = get_sclk() / (16*(dll | dlh << 8));
}
@@ -1290,11 +1218,7 @@
request_irq(uart->port.irq, bfin_serial_rx_int,
IRQF_DISABLED, "BFIN_UART_RX", uart);
pr_info("Request irq for kgdb uart port\n");
-#ifdef CONFIG_BF54x
UART_SET_IER(uart, ERBFI);
-#else
- UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI);
-#endif
SSYNC();
t.c_cflag = CS8|B57600;
t.c_iflag = 0;
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index f9fa237..3e0366ea 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -3808,7 +3808,7 @@
shutdown(info);
rs_flush_buffer(tty);
- tty_ldisc_flush_buffer(tty);
+ tty_ldisc_flush(tty);
tty->closing = 0;
info->event = 0;
info->tty = 0;
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
index 12c934a..8871aaa 100644
--- a/drivers/serial/jsm/jsm.h
+++ b/drivers/serial/jsm/jsm.h
@@ -373,6 +373,7 @@
#define PCI_DEVICE_NEO_2DB9PRI_PCI_NAME "Neo 2 - DB9 Universal PCI - Powered Ring Indicator"
#define PCI_DEVICE_NEO_2RJ45_PCI_NAME "Neo 2 - RJ45 Universal PCI"
#define PCI_DEVICE_NEO_2RJ45PRI_PCI_NAME "Neo 2 - RJ45 Universal PCI - Powered Ring Indicator"
+#define PCIE_DEVICE_NEO_IBM_PCI_NAME "Neo 4 - PCI Express - IBM"
/*
* Our Global Variables.
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index 6767ee3..338cf8a 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -82,7 +82,10 @@
/* store the info for the board we've found */
brd->boardnum = adapter_count++;
brd->pci_dev = pdev;
- brd->maxports = 2;
+ if (pdev->device == PCIE_DEVICE_ID_NEO_4_IBM)
+ brd->maxports = 4;
+ else
+ brd->maxports = 2;
spin_lock_init(&brd->bd_lock);
spin_lock_init(&brd->bd_intr_lock);
@@ -208,6 +211,7 @@
{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9PRI), 0, 0, 1 },
{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 },
{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 },
+ { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4_IBM), 0, 0, 4 },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, jsm_pci_tbl);
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 7a3625f..efc971d 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -783,7 +783,9 @@
}
}
+ spin_unlock(&port->lock);
tty_flip_buffer_push(tty);
+ spin_lock(&port->lock);
return psc_ops->raw_rx_rdy(port);
}
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 1e2b9d8..eab0327 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -556,7 +556,7 @@
static void uart_flush_buffer(struct tty_struct *tty)
{
struct uart_state *state = tty->driver_data;
- struct uart_port *port = state->port;
+ struct uart_port *port;
unsigned long flags;
/*
@@ -568,6 +568,7 @@
return;
}
+ port = state->port;
pr_debug("uart_flush_buffer(%d) called\n", tty->index);
spin_lock_irqsave(&port->lock, flags);
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 9691061..8fdafc2 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -42,14 +42,12 @@
#include <linux/console.h>
#include <linux/platform_device.h>
#include <linux/serial_sci.h>
-
-#ifdef CONFIG_CPU_FREQ
#include <linux/notifier.h>
#include <linux/cpufreq.h>
-#endif
-
-#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+#include <linux/clk.h>
#include <linux/ctype.h>
+
+#ifdef CONFIG_SUPERH
#include <asm/clock.h>
#include <asm/sh_bios.h>
#include <asm/kgdb.h>
@@ -80,7 +78,7 @@
struct timer_list break_timer;
int break_flag;
-#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+#ifdef CONFIG_SUPERH
/* Port clock */
struct clk *clk;
#endif
@@ -365,21 +363,19 @@
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
{
unsigned int fcr_val = 0;
+ unsigned short data;
- if (cflag & CRTSCTS) {
- fcr_val |= SCFCR_MCE;
+ if (port->mapbase == 0xffe00000) {
+ data = ctrl_inw(PSCR);
+ data &= ~0x03cf;
+ if (cflag & CRTSCTS)
+ fcr_val |= SCFCR_MCE;
+ else
+ data |= 0x0340;
- ctrl_outw(0x0000, PORT_PSCR);
- } else {
- unsigned short data;
-
- data = ctrl_inw(PORT_PSCR);
- data &= 0x033f;
- data |= 0x0400;
- ctrl_outw(data, PORT_PSCR);
-
- ctrl_outw(ctrl_inw(SCSPTR0) & 0x17, SCSPTR0);
+ ctrl_outw(data, PSCR);
}
+ /* SCIF1 and SCIF2 should be setup by board code */
sci_out(port, SCFCR, fcr_val);
}
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index fa8700a..eb84833 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -76,12 +76,13 @@
# define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */
# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
-# define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */
-# define SCSPTR0 SCPDR0
+# define PADR 0xA4050120
+# define PSDR 0xA405013e
+# define PWDR 0xA4050166
+# define PSCR 0xA405011E
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
-# define PORT_PSCR 0xA405011E
#elif defined(CONFIG_CPU_SUBTYPE_SH7366)
# define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */
# define SCSPTR0 SCPDR0
@@ -320,7 +321,7 @@
unsigned int addr = port->mapbase + (offset); \
if ((size) == 8) { \
ctrl_outb(value, addr); \
- } else { \
+ } else if ((size) == 16) { \
ctrl_outw(value, addr); \
}
@@ -451,7 +452,11 @@
SCIF_FNS(SCLSR, 0, 0, 0x28, 16)
#else
SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16)
+#if defined(CONFIG_CPU_SUBTYPE_SH7722)
+SCIF_FNS(SCSPTR, 0, 0, 0, 0)
+#else
SCIF_FNS(SCSPTR, 0, 0, 0x20, 16)
+#endif
SCIF_FNS(SCLSR, 0, 0, 0x24, 16)
#endif
#endif
@@ -593,13 +598,25 @@
return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7722) || defined(CONFIG_CPU_SUBTYPE_SH7366)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7366)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffe00000)
return ctrl_inb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */
return 1;
}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ if (port->mapbase == 0xffe00000)
+ return ctrl_inb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */
+ if (port->mapbase == 0xffe10000)
+ return ctrl_inb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */
+ if (port->mapbase == 0xffe20000)
+ return ctrl_inb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */
+
+ return 1;
+}
#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
static inline int sci_rxd_in(struct uart_port *port)
{
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index be0fe15..145c028 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -392,7 +392,7 @@
static struct uart_driver sunhv_reg = {
.owner = THIS_MODULE,
- .driver_name = "serial",
+ .driver_name = "sunhv",
.dev_name = "ttyS",
.major = TTY_MAJOR,
};
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 543f937..9ff5b38 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -826,7 +826,7 @@
static struct uart_driver sunsab_reg = {
.owner = THIS_MODULE,
- .driver_name = "serial",
+ .driver_name = "sunsab",
.dev_name = "ttyS",
.major = TTY_MAJOR,
};
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 4e2302d..03806a9 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1173,7 +1173,7 @@
static struct uart_driver sunsu_reg = {
.owner = THIS_MODULE,
- .driver_name = "serial",
+ .driver_name = "sunsu",
.dev_name = "ttyS",
.major = TTY_MAJOR,
};
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 90a20a1..7e9fa5e 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1023,7 +1023,7 @@
static struct uart_driver sunzilog_reg = {
.owner = THIS_MODULE,
- .driver_name = "ttyS",
+ .driver_name = "sunzilog",
.dev_name = "ttyS",
.major = TTY_MAJOR,
};
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index fae9e8f..66ec5d8 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -126,7 +126,6 @@
config SPI_MPC83xx
tristate "Freescale MPC83xx/QUICC Engine SPI controller"
depends on SPI_MASTER && (PPC_83xx || QUICC_ENGINE) && EXPERIMENTAL
- select SPI_BITBANG
help
This enables using the Freescale MPC83xx and QUICC Engine SPI
controllers in master mode.
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 654bb58..0c452c4 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -1567,7 +1567,7 @@
int status = 0;
/* Enable the SSP clock */
- clk_disable(ssp->clk);
+ clk_enable(ssp->clk);
/* Start the queue running */
status = start_queue(drv_data);
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index a9ac1fd..7fea3cf 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -608,6 +608,7 @@
u8 width;
u16 cr, dma_width, dma_config;
u32 tranf_success = 1;
+ u8 full_duplex = 0;
/* Get current state information */
message = drv_data->cur_msg;
@@ -658,6 +659,7 @@
}
if (transfer->rx_buf != NULL) {
+ full_duplex = transfer->tx_buf != NULL;
drv_data->rx = transfer->rx_buf;
drv_data->rx_end = drv_data->rx + transfer->len;
dev_dbg(&drv_data->pdev->dev, "rx_buf is %p, rx_end is %p\n",
@@ -740,7 +742,8 @@
* successful use different way to r/w according to
* drv_data->cur_chip->enable_dma
*/
- if (drv_data->cur_chip->enable_dma && drv_data->len > 6) {
+ if (!full_duplex && drv_data->cur_chip->enable_dma
+ && drv_data->len > 6) {
disable_dma(drv_data->dma_channel);
clear_dma_irqstat(drv_data->dma_channel);
@@ -828,7 +831,7 @@
/* IO mode write then read */
dev_dbg(&drv_data->pdev->dev, "doing IO transfer\n");
- if (drv_data->tx != NULL && drv_data->rx != NULL) {
+ if (full_duplex) {
/* full duplex mode */
BUG_ON((drv_data->tx_end - drv_data->tx) !=
(drv_data->rx_end - drv_data->rx));
diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
index 189f706..6832da6 100644
--- a/drivers/spi/spi_mpc83xx.c
+++ b/drivers/spi/spi_mpc83xx.c
@@ -49,6 +49,7 @@
#define SPMODE_LEN(x) ((x) << 20)
#define SPMODE_PM(x) ((x) << 16)
#define SPMODE_OP (1 << 14)
+#define SPMODE_CG(x) ((x) << 7)
/*
* Default for SPI Mode:
@@ -67,10 +68,6 @@
/* SPI Controller driver's private data. */
struct mpc83xx_spi {
- /* bitbang has to be first */
- struct spi_bitbang bitbang;
- struct completion done;
-
struct mpc83xx_spi_reg __iomem *base;
/* rx & tx bufs from the spi_transfer */
@@ -82,7 +79,7 @@
u32(*get_tx) (struct mpc83xx_spi *);
unsigned int count;
- u32 irq;
+ int irq;
unsigned nsecs; /* (clock cycle time)/2 */
@@ -94,6 +91,25 @@
void (*activate_cs) (u8 cs, u8 polarity);
void (*deactivate_cs) (u8 cs, u8 polarity);
+
+ u8 busy;
+
+ struct workqueue_struct *workqueue;
+ struct work_struct work;
+
+ struct list_head queue;
+ spinlock_t lock;
+
+ struct completion done;
+};
+
+struct spi_mpc83xx_cs {
+ /* functions to deal with different sized buffers */
+ void (*get_rx) (u32 rx_data, struct mpc83xx_spi *);
+ u32 (*get_tx) (struct mpc83xx_spi *);
+ u32 rx_shift; /* RX data reg shift when in qe mode */
+ u32 tx_shift; /* TX data reg shift when in qe mode */
+ u32 hw_mode; /* Holds HW mode register settings */
};
static inline void mpc83xx_spi_write_reg(__be32 __iomem * reg, u32 val)
@@ -137,6 +153,7 @@
{
struct mpc83xx_spi *mpc83xx_spi;
u8 pol = spi->mode & SPI_CS_HIGH ? 1 : 0;
+ struct spi_mpc83xx_cs *cs = spi->controller_state;
mpc83xx_spi = spi_master_get_devdata(spi->master);
@@ -147,50 +164,26 @@
if (value == BITBANG_CS_ACTIVE) {
u32 regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
- u32 len = spi->bits_per_word;
- u8 pm;
- if (len == 32)
- len = 0;
- else
- len = len - 1;
+ mpc83xx_spi->rx_shift = cs->rx_shift;
+ mpc83xx_spi->tx_shift = cs->tx_shift;
+ mpc83xx_spi->get_rx = cs->get_rx;
+ mpc83xx_spi->get_tx = cs->get_tx;
- /* mask out bits we are going to set */
- regval &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH
- | SPMODE_LEN(0xF) | SPMODE_DIV16
- | SPMODE_PM(0xF) | SPMODE_REV | SPMODE_LOOP);
+ if (cs->hw_mode != regval) {
+ unsigned long flags;
+ void *tmp_ptr = &mpc83xx_spi->base->mode;
- if (spi->mode & SPI_CPHA)
- regval |= SPMODE_CP_BEGIN_EDGECLK;
- if (spi->mode & SPI_CPOL)
- regval |= SPMODE_CI_INACTIVEHIGH;
- if (!(spi->mode & SPI_LSB_FIRST))
- regval |= SPMODE_REV;
- if (spi->mode & SPI_LOOP)
- regval |= SPMODE_LOOP;
-
- regval |= SPMODE_LEN(len);
-
- if ((mpc83xx_spi->spibrg / spi->max_speed_hz) >= 64) {
- pm = mpc83xx_spi->spibrg / (spi->max_speed_hz * 64) - 1;
- if (pm > 0x0f) {
- dev_err(&spi->dev, "Requested speed is too "
- "low: %d Hz. Will use %d Hz instead.\n",
- spi->max_speed_hz,
- mpc83xx_spi->spibrg / 1024);
- pm = 0x0f;
- }
- regval |= SPMODE_PM(pm) | SPMODE_DIV16;
- } else {
- pm = mpc83xx_spi->spibrg / (spi->max_speed_hz * 4);
- if (pm)
- pm--;
- regval |= SPMODE_PM(pm);
+ regval = cs->hw_mode;
+ /* Turn off IRQs locally to minimize time that
+ * SPI is disabled
+ */
+ local_irq_save(flags);
+ /* Turn off SPI unit prior changing mode */
+ mpc83xx_spi_write_reg(tmp_ptr, regval & ~SPMODE_ENABLE);
+ mpc83xx_spi_write_reg(tmp_ptr, regval);
+ local_irq_restore(flags);
}
-
- /* Turn off SPI unit prior changing mode */
- mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, 0);
- mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
if (mpc83xx_spi->activate_cs)
mpc83xx_spi->activate_cs(spi->chip_select, pol);
}
@@ -201,8 +194,9 @@
{
struct mpc83xx_spi *mpc83xx_spi;
u32 regval;
- u8 bits_per_word;
+ u8 bits_per_word, pm;
u32 hz;
+ struct spi_mpc83xx_cs *cs = spi->controller_state;
mpc83xx_spi = spi_master_get_devdata(spi->master);
@@ -223,122 +217,106 @@
|| ((bits_per_word > 16) && (bits_per_word != 32)))
return -EINVAL;
- mpc83xx_spi->rx_shift = 0;
- mpc83xx_spi->tx_shift = 0;
+ if (!hz)
+ hz = spi->max_speed_hz;
+
+ cs->rx_shift = 0;
+ cs->tx_shift = 0;
if (bits_per_word <= 8) {
- mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
- mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
+ cs->get_rx = mpc83xx_spi_rx_buf_u8;
+ cs->get_tx = mpc83xx_spi_tx_buf_u8;
if (mpc83xx_spi->qe_mode) {
- mpc83xx_spi->rx_shift = 16;
- mpc83xx_spi->tx_shift = 24;
+ cs->rx_shift = 16;
+ cs->tx_shift = 24;
}
} else if (bits_per_word <= 16) {
- mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u16;
- mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u16;
+ cs->get_rx = mpc83xx_spi_rx_buf_u16;
+ cs->get_tx = mpc83xx_spi_tx_buf_u16;
if (mpc83xx_spi->qe_mode) {
- mpc83xx_spi->rx_shift = 16;
- mpc83xx_spi->tx_shift = 16;
+ cs->rx_shift = 16;
+ cs->tx_shift = 16;
}
} else if (bits_per_word <= 32) {
- mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u32;
- mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u32;
+ cs->get_rx = mpc83xx_spi_rx_buf_u32;
+ cs->get_tx = mpc83xx_spi_tx_buf_u32;
} else
return -EINVAL;
if (mpc83xx_spi->qe_mode && spi->mode & SPI_LSB_FIRST) {
- mpc83xx_spi->tx_shift = 0;
+ cs->tx_shift = 0;
if (bits_per_word <= 8)
- mpc83xx_spi->rx_shift = 8;
+ cs->rx_shift = 8;
else
- mpc83xx_spi->rx_shift = 0;
+ cs->rx_shift = 0;
}
- /* nsecs = (clock period)/2 */
- if (!hz)
- hz = spi->max_speed_hz;
- mpc83xx_spi->nsecs = (1000000000 / 2) / hz;
- if (mpc83xx_spi->nsecs > MAX_UDELAY_MS * 1000)
- return -EINVAL;
+ mpc83xx_spi->rx_shift = cs->rx_shift;
+ mpc83xx_spi->tx_shift = cs->tx_shift;
+ mpc83xx_spi->get_rx = cs->get_rx;
+ mpc83xx_spi->get_tx = cs->get_tx;
if (bits_per_word == 32)
bits_per_word = 0;
else
bits_per_word = bits_per_word - 1;
- regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
-
/* mask out bits we are going to set */
- regval &= ~(SPMODE_LEN(0xF) | SPMODE_REV);
- regval |= SPMODE_LEN(bits_per_word);
- if (!(spi->mode & SPI_LSB_FIRST))
- regval |= SPMODE_REV;
+ cs->hw_mode &= ~(SPMODE_LEN(0xF) | SPMODE_DIV16
+ | SPMODE_PM(0xF));
- /* Turn off SPI unit prior changing mode */
- mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, 0);
- mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
+ cs->hw_mode |= SPMODE_LEN(bits_per_word);
- return 0;
-}
-
-/* the spi->mode bits understood by this driver: */
-#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
- | SPI_LSB_FIRST | SPI_LOOP)
-
-static int mpc83xx_spi_setup(struct spi_device *spi)
-{
- struct spi_bitbang *bitbang;
- struct mpc83xx_spi *mpc83xx_spi;
- int retval;
-
- if (spi->mode & ~MODEBITS) {
- dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
- spi->mode & ~MODEBITS);
- return -EINVAL;
+ if ((mpc83xx_spi->spibrg / hz) >= 64) {
+ pm = mpc83xx_spi->spibrg / (hz * 64) - 1;
+ if (pm > 0x0f) {
+ dev_err(&spi->dev, "Requested speed is too "
+ "low: %d Hz. Will use %d Hz instead.\n",
+ hz, mpc83xx_spi->spibrg / 1024);
+ pm = 0x0f;
+ }
+ cs->hw_mode |= SPMODE_PM(pm) | SPMODE_DIV16;
+ } else {
+ pm = mpc83xx_spi->spibrg / (hz * 4);
+ if (pm)
+ pm--;
+ cs->hw_mode |= SPMODE_PM(pm);
}
+ regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
+ if (cs->hw_mode != regval) {
+ unsigned long flags;
+ void *tmp_ptr = &mpc83xx_spi->base->mode;
- if (!spi->max_speed_hz)
- return -EINVAL;
-
- bitbang = spi_master_get_devdata(spi->master);
- mpc83xx_spi = spi_master_get_devdata(spi->master);
-
- if (!spi->bits_per_word)
- spi->bits_per_word = 8;
-
- retval = mpc83xx_spi_setup_transfer(spi, NULL);
- if (retval < 0)
- return retval;
-
- dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n",
- __func__, spi->mode & (SPI_CPOL | SPI_CPHA),
- spi->bits_per_word, 2 * mpc83xx_spi->nsecs);
-
- /* NOTE we _need_ to call chipselect() early, ideally with adapter
- * setup, unless the hardware defaults cooperate to avoid confusion
- * between normal (active low) and inverted chipselects.
- */
-
- /* deselect chip (low or high) */
- spin_lock(&bitbang->lock);
- if (!bitbang->busy) {
- bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
- ndelay(mpc83xx_spi->nsecs);
+ regval = cs->hw_mode;
+ /* Turn off IRQs locally to minimize time
+ * that SPI is disabled
+ */
+ local_irq_save(flags);
+ /* Turn off SPI unit prior changing mode */
+ mpc83xx_spi_write_reg(tmp_ptr, regval & ~SPMODE_ENABLE);
+ mpc83xx_spi_write_reg(tmp_ptr, regval);
+ local_irq_restore(flags);
}
- spin_unlock(&bitbang->lock);
-
return 0;
}
static int mpc83xx_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
{
struct mpc83xx_spi *mpc83xx_spi;
- u32 word;
+ u32 word, len, bits_per_word;
mpc83xx_spi = spi_master_get_devdata(spi->master);
mpc83xx_spi->tx = t->tx_buf;
mpc83xx_spi->rx = t->rx_buf;
- mpc83xx_spi->count = t->len;
+ bits_per_word = spi->bits_per_word;
+ if (t->bits_per_word)
+ bits_per_word = t->bits_per_word;
+ len = t->len;
+ if (bits_per_word > 8)
+ len /= 2;
+ if (bits_per_word > 16)
+ len /= 2;
+ mpc83xx_spi->count = len;
INIT_COMPLETION(mpc83xx_spi->done);
/* enable rx ints */
@@ -353,7 +331,147 @@
/* disable rx ints */
mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, 0);
- return t->len - mpc83xx_spi->count;
+ return mpc83xx_spi->count;
+}
+
+static void mpc83xx_spi_work(struct work_struct *work)
+{
+ struct mpc83xx_spi *mpc83xx_spi =
+ container_of(work, struct mpc83xx_spi, work);
+
+ spin_lock_irq(&mpc83xx_spi->lock);
+ mpc83xx_spi->busy = 1;
+ while (!list_empty(&mpc83xx_spi->queue)) {
+ struct spi_message *m;
+ struct spi_device *spi;
+ struct spi_transfer *t = NULL;
+ unsigned cs_change;
+ int status, nsecs = 50;
+
+ m = container_of(mpc83xx_spi->queue.next,
+ struct spi_message, queue);
+ list_del_init(&m->queue);
+ spin_unlock_irq(&mpc83xx_spi->lock);
+
+ spi = m->spi;
+ cs_change = 1;
+ status = 0;
+ list_for_each_entry(t, &m->transfers, transfer_list) {
+ if (t->bits_per_word || t->speed_hz) {
+ /* Don't allow changes if CS is active */
+ status = -EINVAL;
+
+ if (cs_change)
+ status = mpc83xx_spi_setup_transfer(spi, t);
+ if (status < 0)
+ break;
+ }
+
+ if (cs_change)
+ mpc83xx_spi_chipselect(spi, BITBANG_CS_ACTIVE);
+ cs_change = t->cs_change;
+ if (t->len)
+ status = mpc83xx_spi_bufs(spi, t);
+ if (status) {
+ status = -EMSGSIZE;
+ break;
+ }
+ m->actual_length += t->len;
+
+ if (t->delay_usecs)
+ udelay(t->delay_usecs);
+
+ if (cs_change) {
+ ndelay(nsecs);
+ mpc83xx_spi_chipselect(spi, BITBANG_CS_INACTIVE);
+ ndelay(nsecs);
+ }
+ }
+
+ m->status = status;
+ m->complete(m->context);
+
+ if (status || !cs_change) {
+ ndelay(nsecs);
+ mpc83xx_spi_chipselect(spi, BITBANG_CS_INACTIVE);
+ }
+
+ mpc83xx_spi_setup_transfer(spi, NULL);
+
+ spin_lock_irq(&mpc83xx_spi->lock);
+ }
+ mpc83xx_spi->busy = 0;
+ spin_unlock_irq(&mpc83xx_spi->lock);
+}
+
+/* the spi->mode bits understood by this driver: */
+#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
+ | SPI_LSB_FIRST | SPI_LOOP)
+
+static int mpc83xx_spi_setup(struct spi_device *spi)
+{
+ struct mpc83xx_spi *mpc83xx_spi;
+ int retval;
+ u32 hw_mode;
+ struct spi_mpc83xx_cs *cs = spi->controller_state;
+
+ if (spi->mode & ~MODEBITS) {
+ dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
+ spi->mode & ~MODEBITS);
+ return -EINVAL;
+ }
+
+ if (!spi->max_speed_hz)
+ return -EINVAL;
+
+ if (!cs) {
+ cs = kzalloc(sizeof *cs, GFP_KERNEL);
+ if (!cs)
+ return -ENOMEM;
+ spi->controller_state = cs;
+ }
+ mpc83xx_spi = spi_master_get_devdata(spi->master);
+
+ if (!spi->bits_per_word)
+ spi->bits_per_word = 8;
+
+ hw_mode = cs->hw_mode; /* Save orginal settings */
+ cs->hw_mode = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
+ /* mask out bits we are going to set */
+ cs->hw_mode &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH
+ | SPMODE_REV | SPMODE_LOOP);
+
+ if (spi->mode & SPI_CPHA)
+ cs->hw_mode |= SPMODE_CP_BEGIN_EDGECLK;
+ if (spi->mode & SPI_CPOL)
+ cs->hw_mode |= SPMODE_CI_INACTIVEHIGH;
+ if (!(spi->mode & SPI_LSB_FIRST))
+ cs->hw_mode |= SPMODE_REV;
+ if (spi->mode & SPI_LOOP)
+ cs->hw_mode |= SPMODE_LOOP;
+
+ retval = mpc83xx_spi_setup_transfer(spi, NULL);
+ if (retval < 0) {
+ cs->hw_mode = hw_mode; /* Restore settings */
+ return retval;
+ }
+
+ dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u Hz\n",
+ __func__, spi->mode & (SPI_CPOL | SPI_CPHA),
+ spi->bits_per_word, spi->max_speed_hz);
+#if 0 /* Don't think this is needed */
+ /* NOTE we _need_ to call chipselect() early, ideally with adapter
+ * setup, unless the hardware defaults cooperate to avoid confusion
+ * between normal (active low) and inverted chipselects.
+ */
+
+ /* deselect chip (low or high) */
+ spin_lock(&mpc83xx_spi->lock);
+ if (!mpc83xx_spi->busy)
+ mpc83xx_spi_chipselect(spi, BITBANG_CS_INACTIVE);
+ spin_unlock(&mpc83xx_spi->lock);
+#endif
+ return 0;
}
irqreturn_t mpc83xx_spi_irq(s32 irq, void *context_data)
@@ -395,6 +513,28 @@
return ret;
}
+static int mpc83xx_spi_transfer(struct spi_device *spi,
+ struct spi_message *m)
+{
+ struct mpc83xx_spi *mpc83xx_spi = spi_master_get_devdata(spi->master);
+ unsigned long flags;
+
+ m->actual_length = 0;
+ m->status = -EINPROGRESS;
+
+ spin_lock_irqsave(&mpc83xx_spi->lock, flags);
+ list_add_tail(&m->queue, &mpc83xx_spi->queue);
+ queue_work(mpc83xx_spi->workqueue, &mpc83xx_spi->work);
+ spin_unlock_irqrestore(&mpc83xx_spi->lock, flags);
+
+ return 0;
+}
+
+
+static void mpc83xx_spi_cleanup(struct spi_device *spi)
+{
+ kfree(spi->controller_state);
+}
static int __init mpc83xx_spi_probe(struct platform_device *dev)
{
@@ -426,11 +566,11 @@
ret = -ENODEV;
goto free_master;
}
+ master->setup = mpc83xx_spi_setup;
+ master->transfer = mpc83xx_spi_transfer;
+ master->cleanup = mpc83xx_spi_cleanup;
+
mpc83xx_spi = spi_master_get_devdata(master);
- mpc83xx_spi->bitbang.master = spi_master_get(master);
- mpc83xx_spi->bitbang.chipselect = mpc83xx_spi_chipselect;
- mpc83xx_spi->bitbang.setup_transfer = mpc83xx_spi_setup_transfer;
- mpc83xx_spi->bitbang.txrx_bufs = mpc83xx_spi_bufs;
mpc83xx_spi->activate_cs = pdata->activate_cs;
mpc83xx_spi->deactivate_cs = pdata->deactivate_cs;
mpc83xx_spi->qe_mode = pdata->qe_mode;
@@ -445,7 +585,6 @@
mpc83xx_spi->tx_shift = 24;
}
- mpc83xx_spi->bitbang.master->setup = mpc83xx_spi_setup;
init_completion(&mpc83xx_spi->done);
mpc83xx_spi->base = ioremap(r->start, r->end - r->start + 1);
@@ -483,11 +622,21 @@
regval |= SPMODE_OP;
mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
+ spin_lock_init(&mpc83xx_spi->lock);
+ init_completion(&mpc83xx_spi->done);
+ INIT_WORK(&mpc83xx_spi->work, mpc83xx_spi_work);
+ INIT_LIST_HEAD(&mpc83xx_spi->queue);
- ret = spi_bitbang_start(&mpc83xx_spi->bitbang);
-
- if (ret != 0)
+ mpc83xx_spi->workqueue = create_singlethread_workqueue(
+ master->dev.parent->bus_id);
+ if (mpc83xx_spi->workqueue == NULL) {
+ ret = -EBUSY;
goto free_irq;
+ }
+
+ ret = spi_register_master(master);
+ if (ret < 0)
+ goto unreg_master;
printk(KERN_INFO
"%s: MPC83xx SPI Controller driver at 0x%p (irq = %d)\n",
@@ -495,6 +644,8 @@
return ret;
+unreg_master:
+ destroy_workqueue(mpc83xx_spi->workqueue);
free_irq:
free_irq(mpc83xx_spi->irq, mpc83xx_spi);
unmap_io:
@@ -515,10 +666,12 @@
master = platform_get_drvdata(dev);
mpc83xx_spi = spi_master_get_devdata(master);
- spi_bitbang_stop(&mpc83xx_spi->bitbang);
+ flush_workqueue(mpc83xx_spi->workqueue);
+ destroy_workqueue(mpc83xx_spi->workqueue);
+ spi_unregister_master(master);
+
free_irq(mpc83xx_spi->irq, mpc83xx_spi);
iounmap(mpc83xx_spi->base);
- spi_master_put(mpc83xx_spi->bitbang.master);
return 0;
}
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index 34bfb7d..0885cc3 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -125,10 +125,10 @@
/* is clk = pclk / (2 * (pre+1)), or is it
* clk = (pclk * 2) / ( pre + 1) */
- div = (div / 2) - 1;
+ div /= 2;
- if (div < 0)
- div = 1;
+ if (div > 0)
+ div -= 1;
if (div > 255)
div = 255;
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 516a6400..a419c42 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -17,6 +17,8 @@
obj-$(CONFIG_USB_U132_HCD) += host/
obj-$(CONFIG_USB_R8A66597_HCD) += host/
+obj-$(CONFIG_USB_C67X00_HCD) += c67x00/
+
obj-$(CONFIG_USB_ACM) += class/
obj-$(CONFIG_USB_PRINTER) += class/
diff --git a/drivers/usb/atm/Kconfig b/drivers/usb/atm/Kconfig
index 86e6403..be0b8da 100644
--- a/drivers/usb/atm/Kconfig
+++ b/drivers/usb/atm/Kconfig
@@ -19,7 +19,6 @@
config USB_SPEEDTOUCH
tristate "Speedtouch USB support"
- depends on USB_ATM
select FW_LOADER
help
Say Y here if you have an SpeedTouch USB or SpeedTouch 330
@@ -32,7 +31,6 @@
config USB_CXACRU
tristate "Conexant AccessRunner USB support"
- depends on USB_ATM
select FW_LOADER
help
Say Y here if you have an ADSL USB modem based on the Conexant
@@ -45,7 +43,6 @@
config USB_UEAGLEATM
tristate "ADI 930 and eagle USB DSL modem"
- depends on USB_ATM
select FW_LOADER
help
Say Y here if you have an ADSL USB modem based on the ADI 930
@@ -58,7 +55,6 @@
config USB_XUSBATM
tristate "Other USB DSL modem support"
- depends on USB_ATM
help
Say Y here if you have a DSL USB modem not explicitly supported by
another USB DSL drivers. In order to use your modem you will need to
diff --git a/drivers/usb/c67x00/Makefile b/drivers/usb/c67x00/Makefile
new file mode 100644
index 0000000..868bc41
--- /dev/null
+++ b/drivers/usb/c67x00/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for Cypress C67X00 USB Controller
+#
+
+ccflags-$(CONFIG_USB_DEBUG) += -DDEBUG
+
+obj-$(CONFIG_USB_C67X00_HCD) += c67x00.o
+
+c67x00-objs := c67x00-drv.o c67x00-ll-hpi.o c67x00-hcd.o c67x00-sched.o
diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c
new file mode 100644
index 0000000..5633bc5
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-drv.c
@@ -0,0 +1,243 @@
+/*
+ * c67x00-drv.c: Cypress C67X00 USB Common infrastructure
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ * Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ * based on multiple host controller drivers inside the linux kernel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA.
+ */
+
+/*
+ * This file implements the common infrastructure for using the c67x00.
+ * It is both the link between the platform configuration and subdrivers and
+ * the link between the common hardware parts and the subdrivers (e.g.
+ * interrupt handling).
+ *
+ * The c67x00 has 2 SIE's (serial interface engine) wich can be configured
+ * to be host, device or OTG (with some limitations, E.G. only SIE1 can be OTG).
+ *
+ * Depending on the platform configuration, the SIE's are created and
+ * the corresponding subdriver is initialized (c67x00_probe_sie).
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/usb/c67x00.h>
+
+#include "c67x00.h"
+#include "c67x00-hcd.h"
+
+static void c67x00_probe_sie(struct c67x00_sie *sie,
+ struct c67x00_device *dev, int sie_num)
+{
+ spin_lock_init(&sie->lock);
+ sie->dev = dev;
+ sie->sie_num = sie_num;
+ sie->mode = c67x00_sie_config(dev->pdata->sie_config, sie_num);
+
+ switch (sie->mode) {
+ case C67X00_SIE_HOST:
+ c67x00_hcd_probe(sie);
+ break;
+
+ case C67X00_SIE_UNUSED:
+ dev_info(sie_dev(sie),
+ "Not using SIE %d as requested\n", sie->sie_num);
+ break;
+
+ default:
+ dev_err(sie_dev(sie),
+ "Unsupported configuration: 0x%x for SIE %d\n",
+ sie->mode, sie->sie_num);
+ break;
+ }
+}
+
+static void c67x00_remove_sie(struct c67x00_sie *sie)
+{
+ switch (sie->mode) {
+ case C67X00_SIE_HOST:
+ c67x00_hcd_remove(sie);
+ break;
+
+ default:
+ break;
+ }
+}
+
+static irqreturn_t c67x00_irq(int irq, void *__dev)
+{
+ struct c67x00_device *c67x00 = __dev;
+ struct c67x00_sie *sie;
+ u16 msg, int_status;
+ int i, count = 8;
+
+ int_status = c67x00_ll_hpi_status(c67x00);
+ if (!int_status)
+ return IRQ_NONE;
+
+ while (int_status != 0 && (count-- >= 0)) {
+ c67x00_ll_irq(c67x00, int_status);
+ for (i = 0; i < C67X00_SIES; i++) {
+ sie = &c67x00->sie[i];
+ msg = 0;
+ if (int_status & SIEMSG_FLG(i))
+ msg = c67x00_ll_fetch_siemsg(c67x00, i);
+ if (sie->irq)
+ sie->irq(sie, int_status, msg);
+ }
+ int_status = c67x00_ll_hpi_status(c67x00);
+ }
+
+ if (int_status)
+ dev_warn(&c67x00->pdev->dev, "Not all interrupts handled! "
+ "status = 0x%04x\n", int_status);
+
+ return IRQ_HANDLED;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int __devinit c67x00_drv_probe(struct platform_device *pdev)
+{
+ struct c67x00_device *c67x00;
+ struct c67x00_platform_data *pdata;
+ struct resource *res, *res2;
+ int ret, i;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res2)
+ return -ENODEV;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata)
+ return -ENODEV;
+
+ c67x00 = kzalloc(sizeof(*c67x00), GFP_KERNEL);
+ if (!c67x00)
+ return -ENOMEM;
+
+ if (!request_mem_region(res->start, res->end - res->start + 1,
+ pdev->name)) {
+ dev_err(&pdev->dev, "Memory region busy\n");
+ ret = -EBUSY;
+ goto request_mem_failed;
+ }
+ c67x00->hpi.base = ioremap(res->start, res->end - res->start + 1);
+ if (!c67x00->hpi.base) {
+ dev_err(&pdev->dev, "Unable to map HPI registers\n");
+ ret = -EIO;
+ goto map_failed;
+ }
+
+ spin_lock_init(&c67x00->hpi.lock);
+ c67x00->hpi.regstep = pdata->hpi_regstep;
+ c67x00->pdata = pdev->dev.platform_data;
+ c67x00->pdev = pdev;
+
+ c67x00_ll_init(c67x00);
+ c67x00_ll_hpi_reg_init(c67x00);
+
+ ret = request_irq(res2->start, c67x00_irq, 0, pdev->name, c67x00);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot claim IRQ\n");
+ goto request_irq_failed;
+ }
+
+ ret = c67x00_ll_reset(c67x00);
+ if (ret) {
+ dev_err(&pdev->dev, "Device reset failed\n");
+ goto reset_failed;
+ }
+
+ for (i = 0; i < C67X00_SIES; i++)
+ c67x00_probe_sie(&c67x00->sie[i], c67x00, i);
+
+ platform_set_drvdata(pdev, c67x00);
+
+ return 0;
+
+ reset_failed:
+ free_irq(res2->start, c67x00);
+ request_irq_failed:
+ iounmap(c67x00->hpi.base);
+ map_failed:
+ release_mem_region(res->start, res->end - res->start + 1);
+ request_mem_failed:
+ kfree(c67x00);
+
+ return ret;
+}
+
+static int __devexit c67x00_drv_remove(struct platform_device *pdev)
+{
+ struct c67x00_device *c67x00 = platform_get_drvdata(pdev);
+ struct resource *res;
+ int i;
+
+ for (i = 0; i < C67X00_SIES; i++)
+ c67x00_remove_sie(&c67x00->sie[i]);
+
+ c67x00_ll_release(c67x00);
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (res)
+ free_irq(res->start, c67x00);
+
+ iounmap(c67x00->hpi.base);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res)
+ release_mem_region(res->start, res->end - res->start + 1);
+
+ kfree(c67x00);
+
+ return 0;
+}
+
+static struct platform_driver c67x00_driver = {
+ .probe = c67x00_drv_probe,
+ .remove = __devexit_p(c67x00_drv_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "c67x00",
+ },
+};
+MODULE_ALIAS("platform:c67x00");
+
+static int __init c67x00_init(void)
+{
+ return platform_driver_register(&c67x00_driver);
+}
+
+static void __exit c67x00_exit(void)
+{
+ platform_driver_unregister(&c67x00_driver);
+}
+
+module_init(c67x00_init);
+module_exit(c67x00_exit);
+
+MODULE_AUTHOR("Peter Korsgaard, Jan Veldeman, Grant Likely");
+MODULE_DESCRIPTION("Cypress C67X00 USB Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/c67x00/c67x00-hcd.c b/drivers/usb/c67x00/c67x00-hcd.c
new file mode 100644
index 0000000..a22b887
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-hcd.c
@@ -0,0 +1,412 @@
+/*
+ * c67x00-hcd.c: Cypress C67X00 USB Host Controller Driver
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ * Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ * based on multiple host controller drivers inside the linux kernel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/usb.h>
+
+#include "c67x00.h"
+#include "c67x00-hcd.h"
+
+/* --------------------------------------------------------------------------
+ * Root Hub Support
+ */
+
+static __u8 c67x00_hub_des[] = {
+ 0x09, /* __u8 bLength; */
+ 0x29, /* __u8 bDescriptorType; Hub-descriptor */
+ 0x02, /* __u8 bNbrPorts; */
+ 0x00, /* __u16 wHubCharacteristics; */
+ 0x00, /* (per-port OC, no power switching) */
+ 0x32, /* __u8 bPwrOn2pwrGood; 2ms */
+ 0x00, /* __u8 bHubContrCurrent; 0 mA */
+ 0x00, /* __u8 DeviceRemovable; ** 7 Ports max ** */
+ 0xff, /* __u8 PortPwrCtrlMask; ** 7 ports max ** */
+};
+
+static void c67x00_hub_reset_host_port(struct c67x00_sie *sie, int port)
+{
+ struct c67x00_hcd *c67x00 = sie->private_data;
+ unsigned long flags;
+
+ c67x00_ll_husb_reset(sie, port);
+
+ spin_lock_irqsave(&c67x00->lock, flags);
+ c67x00_ll_husb_reset_port(sie, port);
+ spin_unlock_irqrestore(&c67x00->lock, flags);
+
+ c67x00_ll_set_husb_eot(sie->dev, DEFAULT_EOT);
+}
+
+static int c67x00_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+ struct c67x00_sie *sie = c67x00->sie;
+ u16 status;
+ int i;
+
+ *buf = 0;
+ status = c67x00_ll_usb_get_status(sie);
+ for (i = 0; i < C67X00_PORTS; i++)
+ if (status & PORT_CONNECT_CHANGE(i))
+ *buf |= (1 << i);
+
+ /* bit 0 denotes hub change, b1..n port change */
+ *buf <<= 1;
+
+ return !!*buf;
+}
+
+static int c67x00_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+ u16 wIndex, char *buf, u16 wLength)
+{
+ struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+ struct c67x00_sie *sie = c67x00->sie;
+ u16 status, usb_status;
+ int len = 0;
+ unsigned int port = wIndex-1;
+ u16 wPortChange, wPortStatus;
+
+ switch (typeReq) {
+
+ case GetHubStatus:
+ *(__le32 *) buf = cpu_to_le32(0);
+ len = 4; /* hub power */
+ break;
+
+ case GetPortStatus:
+ if (wIndex > C67X00_PORTS)
+ return -EPIPE;
+
+ status = c67x00_ll_usb_get_status(sie);
+ usb_status = c67x00_ll_get_usb_ctl(sie);
+
+ wPortChange = 0;
+ if (status & PORT_CONNECT_CHANGE(port))
+ wPortChange |= USB_PORT_STAT_C_CONNECTION;
+
+ wPortStatus = USB_PORT_STAT_POWER;
+ if (!(status & PORT_SE0_STATUS(port)))
+ wPortStatus |= USB_PORT_STAT_CONNECTION;
+ if (usb_status & LOW_SPEED_PORT(port)) {
+ wPortStatus |= USB_PORT_STAT_LOW_SPEED;
+ c67x00->low_speed_ports |= (1 << port);
+ } else
+ c67x00->low_speed_ports &= ~(1 << port);
+
+ if (usb_status & SOF_EOP_EN(port))
+ wPortStatus |= USB_PORT_STAT_ENABLE;
+
+ *(__le16 *) buf = cpu_to_le16(wPortStatus);
+ *(__le16 *) (buf + 2) = cpu_to_le16(wPortChange);
+ len = 4;
+ break;
+
+ case SetHubFeature: /* We don't implement these */
+ case ClearHubFeature:
+ switch (wValue) {
+ case C_HUB_OVER_CURRENT:
+ case C_HUB_LOCAL_POWER:
+ len = 0;
+ break;
+
+ default:
+ return -EPIPE;
+ }
+ break;
+
+ case SetPortFeature:
+ if (wIndex > C67X00_PORTS)
+ return -EPIPE;
+
+ switch (wValue) {
+ case USB_PORT_FEAT_SUSPEND:
+ dev_dbg(c67x00_hcd_dev(c67x00),
+ "SetPortFeature %d (SUSPEND)\n", port);
+ len = 0;
+ break;
+
+ case USB_PORT_FEAT_RESET:
+ c67x00_hub_reset_host_port(sie, port);
+ len = 0;
+ break;
+
+ case USB_PORT_FEAT_POWER:
+ /* Power always enabled */
+ len = 0;
+ break;
+
+ default:
+ dev_dbg(c67x00_hcd_dev(c67x00),
+ "%s: SetPortFeature %d (0x%04x) Error!\n",
+ __func__, port, wValue);
+ return -EPIPE;
+ }
+ break;
+
+ case ClearPortFeature:
+ if (wIndex > C67X00_PORTS)
+ return -EPIPE;
+
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ /* Reset the port so that the c67x00 also notices the
+ * disconnect */
+ c67x00_hub_reset_host_port(sie, port);
+ len = 0;
+ break;
+
+ case USB_PORT_FEAT_C_ENABLE:
+ dev_dbg(c67x00_hcd_dev(c67x00),
+ "ClearPortFeature (%d): C_ENABLE\n", port);
+ len = 0;
+ break;
+
+ case USB_PORT_FEAT_SUSPEND:
+ dev_dbg(c67x00_hcd_dev(c67x00),
+ "ClearPortFeature (%d): SUSPEND\n", port);
+ len = 0;
+ break;
+
+ case USB_PORT_FEAT_C_SUSPEND:
+ dev_dbg(c67x00_hcd_dev(c67x00),
+ "ClearPortFeature (%d): C_SUSPEND\n", port);
+ len = 0;
+ break;
+
+ case USB_PORT_FEAT_POWER:
+ dev_dbg(c67x00_hcd_dev(c67x00),
+ "ClearPortFeature (%d): POWER\n", port);
+ return -EPIPE;
+
+ case USB_PORT_FEAT_C_CONNECTION:
+ c67x00_ll_usb_clear_status(sie,
+ PORT_CONNECT_CHANGE(port));
+ len = 0;
+ break;
+
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ dev_dbg(c67x00_hcd_dev(c67x00),
+ "ClearPortFeature (%d): OVER_CURRENT\n", port);
+ len = 0;
+ break;
+
+ case USB_PORT_FEAT_C_RESET:
+ dev_dbg(c67x00_hcd_dev(c67x00),
+ "ClearPortFeature (%d): C_RESET\n", port);
+ len = 0;
+ break;
+
+ default:
+ dev_dbg(c67x00_hcd_dev(c67x00),
+ "%s: ClearPortFeature %d (0x%04x) Error!\n",
+ __func__, port, wValue);
+ return -EPIPE;
+ }
+ break;
+
+ case GetHubDescriptor:
+ len = min_t(unsigned int, sizeof(c67x00_hub_des), wLength);
+ memcpy(buf, c67x00_hub_des, len);
+ break;
+
+ default:
+ dev_dbg(c67x00_hcd_dev(c67x00), "%s: unknown\n", __func__);
+ return -EPIPE;
+ }
+
+ return 0;
+}
+
+/* ---------------------------------------------------------------------
+ * Main part of host controller driver
+ */
+
+/**
+ * c67x00_hcd_irq
+ *
+ * This function is called from the interrupt handler in c67x00-drv.c
+ */
+static void c67x00_hcd_irq(struct c67x00_sie *sie, u16 int_status, u16 msg)
+{
+ struct c67x00_hcd *c67x00 = sie->private_data;
+ struct usb_hcd *hcd = c67x00_hcd_to_hcd(c67x00);
+
+ /* Handle sie message flags */
+ if (msg) {
+ if (msg & HUSB_TDListDone)
+ c67x00_sched_kick(c67x00);
+ else
+ dev_warn(c67x00_hcd_dev(c67x00),
+ "Unknown SIE msg flag(s): 0x%04x\n", msg);
+ }
+
+ if (unlikely(hcd->state == HC_STATE_HALT))
+ return;
+
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+ return;
+
+ /* Handle Start of frame events */
+ if (int_status & SOFEOP_FLG(sie->sie_num)) {
+ c67x00_ll_usb_clear_status(sie, SOF_EOP_IRQ_FLG);
+ c67x00_sched_kick(c67x00);
+ set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+ }
+}
+
+/**
+ * c67x00_hcd_start: Host controller start hook
+ */
+static int c67x00_hcd_start(struct usb_hcd *hcd)
+{
+ hcd->uses_new_polling = 1;
+ hcd->state = HC_STATE_RUNNING;
+ hcd->poll_rh = 1;
+
+ return 0;
+}
+
+/**
+ * c67x00_hcd_stop: Host controller stop hook
+ */
+static void c67x00_hcd_stop(struct usb_hcd *hcd)
+{
+ /* Nothing to do */
+}
+
+static int c67x00_hcd_get_frame(struct usb_hcd *hcd)
+{
+ struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+ u16 temp_val;
+
+ dev_dbg(c67x00_hcd_dev(c67x00), "%s\n", __func__);
+ temp_val = c67x00_ll_husb_get_frame(c67x00->sie);
+ temp_val &= HOST_FRAME_MASK;
+ return temp_val ? (temp_val - 1) : HOST_FRAME_MASK;
+}
+
+static struct hc_driver c67x00_hc_driver = {
+ .description = "c67x00-hcd",
+ .product_desc = "Cypress C67X00 Host Controller",
+ .hcd_priv_size = sizeof(struct c67x00_hcd),
+ .flags = HCD_USB11 | HCD_MEMORY,
+
+ /*
+ * basic lifecycle operations
+ */
+ .start = c67x00_hcd_start,
+ .stop = c67x00_hcd_stop,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = c67x00_urb_enqueue,
+ .urb_dequeue = c67x00_urb_dequeue,
+ .endpoint_disable = c67x00_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = c67x00_hcd_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = c67x00_hub_status_data,
+ .hub_control = c67x00_hub_control,
+};
+
+/* ---------------------------------------------------------------------
+ * Setup/Teardown routines
+ */
+
+int c67x00_hcd_probe(struct c67x00_sie *sie)
+{
+ struct c67x00_hcd *c67x00;
+ struct usb_hcd *hcd;
+ unsigned long flags;
+ int retval;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ hcd = usb_create_hcd(&c67x00_hc_driver, sie_dev(sie), "c67x00_sie");
+ if (!hcd) {
+ retval = -ENOMEM;
+ goto err0;
+ }
+ c67x00 = hcd_to_c67x00_hcd(hcd);
+
+ spin_lock_init(&c67x00->lock);
+ c67x00->sie = sie;
+
+ INIT_LIST_HEAD(&c67x00->list[PIPE_ISOCHRONOUS]);
+ INIT_LIST_HEAD(&c67x00->list[PIPE_INTERRUPT]);
+ INIT_LIST_HEAD(&c67x00->list[PIPE_CONTROL]);
+ INIT_LIST_HEAD(&c67x00->list[PIPE_BULK]);
+ c67x00->urb_count = 0;
+ INIT_LIST_HEAD(&c67x00->td_list);
+ c67x00->td_base_addr = CY_HCD_BUF_ADDR + SIE_TD_OFFSET(sie->sie_num);
+ c67x00->buf_base_addr = CY_HCD_BUF_ADDR + SIE_BUF_OFFSET(sie->sie_num);
+ c67x00->max_frame_bw = MAX_FRAME_BW_STD;
+
+ c67x00_ll_husb_init_host_port(sie);
+
+ init_completion(&c67x00->endpoint_disable);
+ retval = c67x00_sched_start_scheduler(c67x00);
+ if (retval)
+ goto err1;
+
+ retval = usb_add_hcd(hcd, 0, 0);
+ if (retval) {
+ dev_dbg(sie_dev(sie), "%s: usb_add_hcd returned %d\n",
+ __func__, retval);
+ goto err2;
+ }
+
+ spin_lock_irqsave(&sie->lock, flags);
+ sie->private_data = c67x00;
+ sie->irq = c67x00_hcd_irq;
+ spin_unlock_irqrestore(&sie->lock, flags);
+
+ return retval;
+
+ err2:
+ c67x00_sched_stop_scheduler(c67x00);
+ err1:
+ usb_put_hcd(hcd);
+ err0:
+ return retval;
+}
+
+/* may be called with controller, bus, and devices active */
+void c67x00_hcd_remove(struct c67x00_sie *sie)
+{
+ struct c67x00_hcd *c67x00 = sie->private_data;
+ struct usb_hcd *hcd = c67x00_hcd_to_hcd(c67x00);
+
+ c67x00_sched_stop_scheduler(c67x00);
+ usb_remove_hcd(hcd);
+ usb_put_hcd(hcd);
+}
diff --git a/drivers/usb/c67x00/c67x00-hcd.h b/drivers/usb/c67x00/c67x00-hcd.h
new file mode 100644
index 0000000..e8c6d94
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-hcd.h
@@ -0,0 +1,133 @@
+/*
+ * c67x00-hcd.h: Cypress C67X00 USB HCD
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ * Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ * based on multiple host controller drivers inside the linux kernel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA.
+ */
+
+#ifndef _USB_C67X00_HCD_H
+#define _USB_C67X00_HCD_H
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "c67x00.h"
+
+/*
+ * The following parameters depend on the CPU speed, bus speed, ...
+ * These can be tuned for specific use cases, e.g. if isochronous transfers
+ * are very important, bandwith can be sacrificed to guarantee that the
+ * 1ms deadline will be met.
+ * If bulk transfers are important, the MAX_FRAME_BW can be increased,
+ * but some (or many) isochronous deadlines might not be met.
+ *
+ * The values are specified in bittime.
+ */
+
+/*
+ * The current implementation switches between _STD (default) and _ISO (when
+ * isochronous transfers are scheduled), in order to optimize the throughput
+ * in normal cicrumstances, but also provide good isochronous behaviour.
+ *
+ * Bandwidth is described in bit time so with a 12MHz USB clock and 1ms
+ * frames; there are 12000 bit times per frame.
+ */
+
+#define TOTAL_FRAME_BW 12000
+#define DEFAULT_EOT 2250
+
+#define MAX_FRAME_BW_STD (TOTAL_FRAME_BW - DEFAULT_EOT)
+#define MAX_FRAME_BW_ISO 2400
+
+/*
+ * Periodic transfers may only use 90% of the full frame, but as
+ * we currently don't even use 90% of the full frame, we may
+ * use the full usable time for periodic transfers.
+ */
+#define MAX_PERIODIC_BW(full_bw) full_bw
+
+/* -------------------------------------------------------------------------- */
+
+struct c67x00_hcd {
+ spinlock_t lock;
+ struct c67x00_sie *sie;
+ unsigned int low_speed_ports; /* bitmask of low speed ports */
+ unsigned int urb_count;
+ unsigned int urb_iso_count;
+
+ struct list_head list[4]; /* iso, int, ctrl, bulk */
+#if PIPE_BULK != 3
+#error "Sanity check failed, this code presumes PIPE_... to range from 0 to 3"
+#endif
+
+ /* USB bandwidth allocated to td_list */
+ int bandwidth_allocated;
+ /* USB bandwidth allocated for isoc/int transfer */
+ int periodic_bw_allocated;
+ struct list_head td_list;
+ int max_frame_bw;
+
+ u16 td_base_addr;
+ u16 buf_base_addr;
+ u16 next_td_addr;
+ u16 next_buf_addr;
+
+ struct tasklet_struct tasklet;
+
+ struct completion endpoint_disable;
+
+ u16 current_frame;
+ u16 last_frame;
+};
+
+static inline struct c67x00_hcd *hcd_to_c67x00_hcd(struct usb_hcd *hcd)
+{
+ return (struct c67x00_hcd *)(hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *c67x00_hcd_to_hcd(struct c67x00_hcd *c67x00)
+{
+ return container_of((void *)c67x00, struct usb_hcd, hcd_priv);
+}
+
+/* ---------------------------------------------------------------------
+ * Functions used by c67x00-drv
+ */
+
+int c67x00_hcd_probe(struct c67x00_sie *sie);
+void c67x00_hcd_remove(struct c67x00_sie *sie);
+
+/* ---------------------------------------------------------------------
+ * Transfer Descriptor scheduling functions
+ */
+int c67x00_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
+int c67x00_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
+void c67x00_endpoint_disable(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep);
+
+void c67x00_hcd_msg_received(struct c67x00_sie *sie, u16 msg);
+void c67x00_sched_kick(struct c67x00_hcd *c67x00);
+int c67x00_sched_start_scheduler(struct c67x00_hcd *c67x00);
+void c67x00_sched_stop_scheduler(struct c67x00_hcd *c67x00);
+
+#define c67x00_hcd_dev(x) (c67x00_hcd_to_hcd(x)->self.controller)
+
+#endif /* _USB_C67X00_HCD_H */
diff --git a/drivers/usb/c67x00/c67x00-ll-hpi.c b/drivers/usb/c67x00/c67x00-ll-hpi.c
new file mode 100644
index 0000000..5100fbb
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-ll-hpi.c
@@ -0,0 +1,481 @@
+/*
+ * c67x00-ll-hpi.c: Cypress C67X00 USB Low level interface using HPI
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ * Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ * based on multiple host controller drivers inside the linux kernel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA.
+ */
+
+#include <asm/byteorder.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/usb/c67x00.h>
+#include "c67x00.h"
+
+#define COMM_REGS 14
+
+struct c67x00_lcp_int_data {
+ u16 regs[COMM_REGS];
+};
+
+/* -------------------------------------------------------------------------- */
+/* Interface definitions */
+
+#define COMM_ACK 0x0FED
+#define COMM_NAK 0xDEAD
+
+#define COMM_RESET 0xFA50
+#define COMM_EXEC_INT 0xCE01
+#define COMM_INT_NUM 0x01C2
+
+/* Registers 0 to COMM_REGS-1 */
+#define COMM_R(x) (0x01C4 + 2 * (x))
+
+#define HUSB_SIE_pCurrentTDPtr(x) ((x) ? 0x01B2 : 0x01B0)
+#define HUSB_SIE_pTDListDone_Sem(x) ((x) ? 0x01B8 : 0x01B6)
+#define HUSB_pEOT 0x01B4
+
+/* Software interrupts */
+/* 114, 115: */
+#define HUSB_SIE_INIT_INT(x) ((x) ? 0x0073 : 0x0072)
+#define HUSB_RESET_INT 0x0074
+
+#define SUSB_INIT_INT 0x0071
+#define SUSB_INIT_INT_LOC (SUSB_INIT_INT * 2)
+
+/* -----------------------------------------------------------------------
+ * HPI implementation
+ *
+ * The c67x00 chip also support control via SPI or HSS serial
+ * interfaces. However, this driver assumes that register access can
+ * be performed from IRQ context. While this is a safe assuption with
+ * the HPI interface, it is not true for the serial interfaces.
+ */
+
+/* HPI registers */
+#define HPI_DATA 0
+#define HPI_MAILBOX 1
+#define HPI_ADDR 2
+#define HPI_STATUS 3
+
+static inline u16 hpi_read_reg(struct c67x00_device *dev, int reg)
+{
+ return __raw_readw(dev->hpi.base + reg * dev->hpi.regstep);
+}
+
+static inline void hpi_write_reg(struct c67x00_device *dev, int reg, u16 value)
+{
+ __raw_writew(value, dev->hpi.base + reg * dev->hpi.regstep);
+}
+
+static inline u16 hpi_read_word_nolock(struct c67x00_device *dev, u16 reg)
+{
+ hpi_write_reg(dev, HPI_ADDR, reg);
+ return hpi_read_reg(dev, HPI_DATA);
+}
+
+static u16 hpi_read_word(struct c67x00_device *dev, u16 reg)
+{
+ u16 value;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hpi.lock, flags);
+ value = hpi_read_word_nolock(dev, reg);
+ spin_unlock_irqrestore(&dev->hpi.lock, flags);
+
+ return value;
+}
+
+static void hpi_write_word_nolock(struct c67x00_device *dev, u16 reg, u16 value)
+{
+ hpi_write_reg(dev, HPI_ADDR, reg);
+ hpi_write_reg(dev, HPI_DATA, value);
+}
+
+static void hpi_write_word(struct c67x00_device *dev, u16 reg, u16 value)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hpi.lock, flags);
+ hpi_write_word_nolock(dev, reg, value);
+ spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+/*
+ * Only data is little endian, addr has cpu endianess
+ */
+static void hpi_write_words_le16(struct c67x00_device *dev, u16 addr,
+ u16 *data, u16 count)
+{
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&dev->hpi.lock, flags);
+
+ hpi_write_reg(dev, HPI_ADDR, addr);
+ for (i = 0; i < count; i++)
+ hpi_write_reg(dev, HPI_DATA, cpu_to_le16(*data++));
+
+ spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+/*
+ * Only data is little endian, addr has cpu endianess
+ */
+static void hpi_read_words_le16(struct c67x00_device *dev, u16 addr,
+ u16 *data, u16 count)
+{
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&dev->hpi.lock, flags);
+ hpi_write_reg(dev, HPI_ADDR, addr);
+ for (i = 0; i < count; i++)
+ *data++ = le16_to_cpu(hpi_read_reg(dev, HPI_DATA));
+
+ spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+static void hpi_set_bits(struct c67x00_device *dev, u16 reg, u16 mask)
+{
+ u16 value;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hpi.lock, flags);
+ value = hpi_read_word_nolock(dev, reg);
+ hpi_write_word_nolock(dev, reg, value | mask);
+ spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+static void hpi_clear_bits(struct c67x00_device *dev, u16 reg, u16 mask)
+{
+ u16 value;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hpi.lock, flags);
+ value = hpi_read_word_nolock(dev, reg);
+ hpi_write_word_nolock(dev, reg, value & ~mask);
+ spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+static u16 hpi_recv_mbox(struct c67x00_device *dev)
+{
+ u16 value;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hpi.lock, flags);
+ value = hpi_read_reg(dev, HPI_MAILBOX);
+ spin_unlock_irqrestore(&dev->hpi.lock, flags);
+
+ return value;
+}
+
+static u16 hpi_send_mbox(struct c67x00_device *dev, u16 value)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hpi.lock, flags);
+ hpi_write_reg(dev, HPI_MAILBOX, value);
+ spin_unlock_irqrestore(&dev->hpi.lock, flags);
+
+ return value;
+}
+
+u16 c67x00_ll_hpi_status(struct c67x00_device *dev)
+{
+ u16 value;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hpi.lock, flags);
+ value = hpi_read_reg(dev, HPI_STATUS);
+ spin_unlock_irqrestore(&dev->hpi.lock, flags);
+
+ return value;
+}
+
+void c67x00_ll_hpi_reg_init(struct c67x00_device *dev)
+{
+ int i;
+
+ hpi_recv_mbox(dev);
+ c67x00_ll_hpi_status(dev);
+ hpi_write_word(dev, HPI_IRQ_ROUTING_REG, 0);
+
+ for (i = 0; i < C67X00_SIES; i++) {
+ hpi_write_word(dev, SIEMSG_REG(i), 0);
+ hpi_read_word(dev, SIEMSG_REG(i));
+ }
+}
+
+void c67x00_ll_hpi_enable_sofeop(struct c67x00_sie *sie)
+{
+ hpi_set_bits(sie->dev, HPI_IRQ_ROUTING_REG,
+ SOFEOP_TO_HPI_EN(sie->sie_num));
+}
+
+void c67x00_ll_hpi_disable_sofeop(struct c67x00_sie *sie)
+{
+ hpi_clear_bits(sie->dev, HPI_IRQ_ROUTING_REG,
+ SOFEOP_TO_HPI_EN(sie->sie_num));
+}
+
+/* -------------------------------------------------------------------------- */
+/* Transactions */
+
+static inline u16 ll_recv_msg(struct c67x00_device *dev)
+{
+ u16 res;
+
+ res = wait_for_completion_timeout(&dev->hpi.lcp.msg_received, 5 * HZ);
+ WARN_ON(!res);
+
+ return (res == 0) ? -EIO : 0;
+}
+
+/* -------------------------------------------------------------------------- */
+/* General functions */
+
+u16 c67x00_ll_fetch_siemsg(struct c67x00_device *dev, int sie_num)
+{
+ u16 val;
+
+ val = hpi_read_word(dev, SIEMSG_REG(sie_num));
+ /* clear register to allow next message */
+ hpi_write_word(dev, SIEMSG_REG(sie_num), 0);
+
+ return val;
+}
+
+u16 c67x00_ll_get_usb_ctl(struct c67x00_sie *sie)
+{
+ return hpi_read_word(sie->dev, USB_CTL_REG(sie->sie_num));
+}
+
+/**
+ * c67x00_ll_usb_clear_status - clear the USB status bits
+ */
+void c67x00_ll_usb_clear_status(struct c67x00_sie *sie, u16 bits)
+{
+ hpi_write_word(sie->dev, USB_STAT_REG(sie->sie_num), bits);
+}
+
+u16 c67x00_ll_usb_get_status(struct c67x00_sie *sie)
+{
+ return hpi_read_word(sie->dev, USB_STAT_REG(sie->sie_num));
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int c67x00_comm_exec_int(struct c67x00_device *dev, u16 nr,
+ struct c67x00_lcp_int_data *data)
+{
+ int i, rc;
+
+ mutex_lock(&dev->hpi.lcp.mutex);
+ hpi_write_word(dev, COMM_INT_NUM, nr);
+ for (i = 0; i < COMM_REGS; i++)
+ hpi_write_word(dev, COMM_R(i), data->regs[i]);
+ hpi_send_mbox(dev, COMM_EXEC_INT);
+ rc = ll_recv_msg(dev);
+ mutex_unlock(&dev->hpi.lcp.mutex);
+
+ return rc;
+}
+
+/* -------------------------------------------------------------------------- */
+/* Host specific functions */
+
+void c67x00_ll_set_husb_eot(struct c67x00_device *dev, u16 value)
+{
+ mutex_lock(&dev->hpi.lcp.mutex);
+ hpi_write_word(dev, HUSB_pEOT, value);
+ mutex_unlock(&dev->hpi.lcp.mutex);
+}
+
+static inline void c67x00_ll_husb_sie_init(struct c67x00_sie *sie)
+{
+ struct c67x00_device *dev = sie->dev;
+ struct c67x00_lcp_int_data data;
+ int rc;
+
+ rc = c67x00_comm_exec_int(dev, HUSB_SIE_INIT_INT(sie->sie_num), &data);
+ BUG_ON(rc); /* No return path for error code; crash spectacularly */
+}
+
+void c67x00_ll_husb_reset(struct c67x00_sie *sie, int port)
+{
+ struct c67x00_device *dev = sie->dev;
+ struct c67x00_lcp_int_data data;
+ int rc;
+
+ data.regs[0] = 50; /* Reset USB port for 50ms */
+ data.regs[1] = port | (sie->sie_num << 1);
+ rc = c67x00_comm_exec_int(dev, HUSB_RESET_INT, &data);
+ BUG_ON(rc); /* No return path for error code; crash spectacularly */
+}
+
+void c67x00_ll_husb_set_current_td(struct c67x00_sie *sie, u16 addr)
+{
+ hpi_write_word(sie->dev, HUSB_SIE_pCurrentTDPtr(sie->sie_num), addr);
+}
+
+u16 c67x00_ll_husb_get_current_td(struct c67x00_sie *sie)
+{
+ return hpi_read_word(sie->dev, HUSB_SIE_pCurrentTDPtr(sie->sie_num));
+}
+
+u16 c67x00_ll_husb_get_frame(struct c67x00_sie *sie)
+{
+ return hpi_read_word(sie->dev, HOST_FRAME_REG(sie->sie_num));
+}
+
+void c67x00_ll_husb_init_host_port(struct c67x00_sie *sie)
+{
+ /* Set port into host mode */
+ hpi_set_bits(sie->dev, USB_CTL_REG(sie->sie_num), HOST_MODE);
+ c67x00_ll_husb_sie_init(sie);
+ /* Clear interrupts */
+ c67x00_ll_usb_clear_status(sie, HOST_STAT_MASK);
+ /* Check */
+ if (!(hpi_read_word(sie->dev, USB_CTL_REG(sie->sie_num)) & HOST_MODE))
+ dev_warn(sie_dev(sie),
+ "SIE %d not set to host mode\n", sie->sie_num);
+}
+
+void c67x00_ll_husb_reset_port(struct c67x00_sie *sie, int port)
+{
+ /* Clear connect change */
+ c67x00_ll_usb_clear_status(sie, PORT_CONNECT_CHANGE(port));
+
+ /* Enable interrupts */
+ hpi_set_bits(sie->dev, HPI_IRQ_ROUTING_REG,
+ SOFEOP_TO_CPU_EN(sie->sie_num));
+ hpi_set_bits(sie->dev, HOST_IRQ_EN_REG(sie->sie_num),
+ SOF_EOP_IRQ_EN | DONE_IRQ_EN);
+
+ /* Enable pull down transistors */
+ hpi_set_bits(sie->dev, USB_CTL_REG(sie->sie_num), PORT_RES_EN(port));
+}
+
+/* -------------------------------------------------------------------------- */
+
+void c67x00_ll_irq(struct c67x00_device *dev, u16 int_status)
+{
+ if ((int_status & MBX_OUT_FLG) == 0)
+ return;
+
+ dev->hpi.lcp.last_msg = hpi_recv_mbox(dev);
+ complete(&dev->hpi.lcp.msg_received);
+}
+
+/* -------------------------------------------------------------------------- */
+
+int c67x00_ll_reset(struct c67x00_device *dev)
+{
+ int rc;
+
+ mutex_lock(&dev->hpi.lcp.mutex);
+ hpi_send_mbox(dev, COMM_RESET);
+ rc = ll_recv_msg(dev);
+ mutex_unlock(&dev->hpi.lcp.mutex);
+
+ return rc;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * c67x00_ll_write_mem_le16 - write into c67x00 memory
+ * Only data is little endian, addr has cpu endianess.
+ */
+void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr,
+ void *data, int len)
+{
+ u8 *buf = data;
+
+ /* Sanity check */
+ if (addr + len > 0xffff) {
+ dev_err(&dev->pdev->dev,
+ "Trying to write beyond writable region!\n");
+ return;
+ }
+
+ if (addr & 0x01) {
+ /* unaligned access */
+ u16 tmp;
+ tmp = hpi_read_word(dev, addr - 1);
+ tmp = (tmp & 0x00ff) | (*buf++ << 8);
+ hpi_write_word(dev, addr - 1, tmp);
+ addr++;
+ len--;
+ }
+
+ hpi_write_words_le16(dev, addr, (u16 *)buf, len / 2);
+ buf += len & ~0x01;
+ addr += len & ~0x01;
+ len &= 0x01;
+
+ if (len) {
+ u16 tmp;
+ tmp = hpi_read_word(dev, addr);
+ tmp = (tmp & 0xff00) | *buf;
+ hpi_write_word(dev, addr, tmp);
+ }
+}
+
+/**
+ * c67x00_ll_read_mem_le16 - read from c67x00 memory
+ * Only data is little endian, addr has cpu endianess.
+ */
+void c67x00_ll_read_mem_le16(struct c67x00_device *dev, u16 addr,
+ void *data, int len)
+{
+ u8 *buf = data;
+
+ if (addr & 0x01) {
+ /* unaligned access */
+ u16 tmp;
+ tmp = hpi_read_word(dev, addr - 1);
+ *buf++ = (tmp >> 8) & 0x00ff;
+ addr++;
+ len--;
+ }
+
+ hpi_read_words_le16(dev, addr, (u16 *)buf, len / 2);
+ buf += len & ~0x01;
+ addr += len & ~0x01;
+ len &= 0x01;
+
+ if (len) {
+ u16 tmp;
+ tmp = hpi_read_word(dev, addr);
+ *buf = tmp & 0x00ff;
+ }
+}
+
+/* -------------------------------------------------------------------------- */
+
+void c67x00_ll_init(struct c67x00_device *dev)
+{
+ mutex_init(&dev->hpi.lcp.mutex);
+ init_completion(&dev->hpi.lcp.msg_received);
+}
+
+void c67x00_ll_release(struct c67x00_device *dev)
+{
+}
diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c
new file mode 100644
index 0000000..85dfe29
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-sched.c
@@ -0,0 +1,1170 @@
+/*
+ * c67x00-sched.c: Cypress C67X00 USB Host Controller Driver - TD scheduling
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ * Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ * based on multiple host controller drivers inside the linux kernel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA.
+ */
+
+#include <linux/kthread.h>
+
+#include "c67x00.h"
+#include "c67x00-hcd.h"
+
+/*
+ * These are the stages for a control urb, they are kept
+ * in both urb->interval and td->privdata.
+ */
+#define SETUP_STAGE 0
+#define DATA_STAGE 1
+#define STATUS_STAGE 2
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * struct c67x00_ep_data: Host endpoint data structure
+ */
+struct c67x00_ep_data {
+ struct list_head queue;
+ struct list_head node;
+ struct usb_host_endpoint *hep;
+ struct usb_device *dev;
+ u16 next_frame; /* For int/isoc transactions */
+};
+
+/**
+ * struct c67x00_td
+ *
+ * Hardware parts are little endiannes, SW in CPU endianess.
+ */
+struct c67x00_td {
+ /* HW specific part */
+ __le16 ly_base_addr; /* Bytes 0-1 */
+ __le16 port_length; /* Bytes 2-3 */
+ u8 pid_ep; /* Byte 4 */
+ u8 dev_addr; /* Byte 5 */
+ u8 ctrl_reg; /* Byte 6 */
+ u8 status; /* Byte 7 */
+ u8 retry_cnt; /* Byte 8 */
+#define TT_OFFSET 2
+#define TT_CONTROL 0
+#define TT_ISOCHRONOUS 1
+#define TT_BULK 2
+#define TT_INTERRUPT 3
+ u8 residue; /* Byte 9 */
+ __le16 next_td_addr; /* Bytes 10-11 */
+ /* SW part */
+ struct list_head td_list;
+ u16 td_addr;
+ void *data;
+ struct urb *urb;
+ unsigned long privdata;
+
+ /* These are needed for handling the toggle bits:
+ * an urb can be dequeued while a td is in progress
+ * after checking the td, the toggle bit might need to
+ * be fixed */
+ struct c67x00_ep_data *ep_data;
+ unsigned int pipe;
+};
+
+struct c67x00_urb_priv {
+ struct list_head hep_node;
+ struct urb *urb;
+ int port;
+ int cnt; /* packet number for isoc */
+ int status;
+ struct c67x00_ep_data *ep_data;
+};
+
+#define td_udev(td) ((td)->ep_data->dev)
+
+#define CY_TD_SIZE 12
+
+#define TD_PIDEP_OFFSET 0x04
+#define TD_PIDEPMASK_PID 0xF0
+#define TD_PIDEPMASK_EP 0x0F
+#define TD_PORTLENMASK_DL 0x02FF
+#define TD_PORTLENMASK_PN 0xC000
+
+#define TD_STATUS_OFFSET 0x07
+#define TD_STATUSMASK_ACK 0x01
+#define TD_STATUSMASK_ERR 0x02
+#define TD_STATUSMASK_TMOUT 0x04
+#define TD_STATUSMASK_SEQ 0x08
+#define TD_STATUSMASK_SETUP 0x10
+#define TD_STATUSMASK_OVF 0x20
+#define TD_STATUSMASK_NAK 0x40
+#define TD_STATUSMASK_STALL 0x80
+
+#define TD_ERROR_MASK (TD_STATUSMASK_ERR | TD_STATUSMASK_TMOUT | \
+ TD_STATUSMASK_STALL)
+
+#define TD_RETRYCNT_OFFSET 0x08
+#define TD_RETRYCNTMASK_ACT_FLG 0x10
+#define TD_RETRYCNTMASK_TX_TYPE 0x0C
+#define TD_RETRYCNTMASK_RTY_CNT 0x03
+
+#define TD_RESIDUE_OVERFLOW 0x80
+
+#define TD_PID_IN 0x90
+
+/* Residue: signed 8bits, neg -> OVERFLOW, pos -> UNDERFLOW */
+#define td_residue(td) ((__s8)(td->residue))
+#define td_ly_base_addr(td) (__le16_to_cpu((td)->ly_base_addr))
+#define td_port_length(td) (__le16_to_cpu((td)->port_length))
+#define td_next_td_addr(td) (__le16_to_cpu((td)->next_td_addr))
+
+#define td_active(td) ((td)->retry_cnt & TD_RETRYCNTMASK_ACT_FLG)
+#define td_length(td) (td_port_length(td) & TD_PORTLENMASK_DL)
+
+#define td_sequence_ok(td) (!td->status || \
+ (!(td->status & TD_STATUSMASK_SEQ) == \
+ !(td->ctrl_reg & SEQ_SEL)))
+
+#define td_acked(td) (!td->status || \
+ (td->status & TD_STATUSMASK_ACK))
+#define td_actual_bytes(td) (td_length(td) - td_residue(td))
+
+/* -------------------------------------------------------------------------- */
+
+#ifdef DEBUG
+
+/**
+ * dbg_td - Dump the contents of the TD
+ */
+static void dbg_td(struct c67x00_hcd *c67x00, struct c67x00_td *td, char *msg)
+{
+ struct device *dev = c67x00_hcd_dev(c67x00);
+
+ dev_dbg(dev, "### %s at 0x%04x\n", msg, td->td_addr);
+ dev_dbg(dev, "urb: 0x%p\n", td->urb);
+ dev_dbg(dev, "endpoint: %4d\n", usb_pipeendpoint(td->pipe));
+ dev_dbg(dev, "pipeout: %4d\n", usb_pipeout(td->pipe));
+ dev_dbg(dev, "ly_base_addr: 0x%04x\n", td_ly_base_addr(td));
+ dev_dbg(dev, "port_length: 0x%04x\n", td_port_length(td));
+ dev_dbg(dev, "pid_ep: 0x%02x\n", td->pid_ep);
+ dev_dbg(dev, "dev_addr: 0x%02x\n", td->dev_addr);
+ dev_dbg(dev, "ctrl_reg: 0x%02x\n", td->ctrl_reg);
+ dev_dbg(dev, "status: 0x%02x\n", td->status);
+ dev_dbg(dev, "retry_cnt: 0x%02x\n", td->retry_cnt);
+ dev_dbg(dev, "residue: 0x%02x\n", td->residue);
+ dev_dbg(dev, "next_td_addr: 0x%04x\n", td_next_td_addr(td));
+ dev_dbg(dev, "data:");
+ print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1,
+ td->data, td_length(td), 1);
+}
+#else /* DEBUG */
+
+static inline void
+dbg_td(struct c67x00_hcd *c67x00, struct c67x00_td *td, char *msg) { }
+
+#endif /* DEBUG */
+
+/* -------------------------------------------------------------------------- */
+/* Helper functions */
+
+static inline u16 c67x00_get_current_frame_number(struct c67x00_hcd *c67x00)
+{
+ return c67x00_ll_husb_get_frame(c67x00->sie) & HOST_FRAME_MASK;
+}
+
+/**
+ * frame_add
+ * Software wraparound for framenumbers.
+ */
+static inline u16 frame_add(u16 a, u16 b)
+{
+ return (a + b) & HOST_FRAME_MASK;
+}
+
+/**
+ * frame_after - is frame a after frame b
+ */
+static inline int frame_after(u16 a, u16 b)
+{
+ return ((HOST_FRAME_MASK + a - b) & HOST_FRAME_MASK) <
+ (HOST_FRAME_MASK / 2);
+}
+
+/**
+ * frame_after_eq - is frame a after or equal to frame b
+ */
+static inline int frame_after_eq(u16 a, u16 b)
+{
+ return ((HOST_FRAME_MASK + 1 + a - b) & HOST_FRAME_MASK) <
+ (HOST_FRAME_MASK / 2);
+}
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * c67x00_release_urb - remove link from all tds to this urb
+ * Disconnects the urb from it's tds, so that it can be given back.
+ * pre: urb->hcpriv != NULL
+ */
+static void c67x00_release_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+ struct c67x00_td *td;
+ struct c67x00_urb_priv *urbp;
+
+ BUG_ON(!urb);
+
+ c67x00->urb_count--;
+
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+ c67x00->urb_iso_count--;
+ if (c67x00->urb_iso_count == 0)
+ c67x00->max_frame_bw = MAX_FRAME_BW_STD;
+ }
+
+ /* TODO this might be not so efficient when we've got many urbs!
+ * Alternatives:
+ * * only clear when needed
+ * * keep a list of tds with each urbp
+ */
+ list_for_each_entry(td, &c67x00->td_list, td_list)
+ if (urb == td->urb)
+ td->urb = NULL;
+
+ urbp = urb->hcpriv;
+ urb->hcpriv = NULL;
+ list_del(&urbp->hep_node);
+ kfree(urbp);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static struct c67x00_ep_data *
+c67x00_ep_data_alloc(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+ struct usb_host_endpoint *hep = urb->ep;
+ struct c67x00_ep_data *ep_data;
+ int type;
+
+ c67x00->current_frame = c67x00_get_current_frame_number(c67x00);
+
+ /* Check if endpoint already has a c67x00_ep_data struct allocated */
+ if (hep->hcpriv) {
+ ep_data = hep->hcpriv;
+ if (frame_after(c67x00->current_frame, ep_data->next_frame))
+ ep_data->next_frame =
+ frame_add(c67x00->current_frame, 1);
+ return hep->hcpriv;
+ }
+
+ /* Allocate and initialize a new c67x00 endpoint data structure */
+ ep_data = kzalloc(sizeof(*ep_data), GFP_ATOMIC);
+ if (!ep_data)
+ return NULL;
+
+ INIT_LIST_HEAD(&ep_data->queue);
+ INIT_LIST_HEAD(&ep_data->node);
+ ep_data->hep = hep;
+
+ /* hold a reference to udev as long as this endpoint lives,
+ * this is needed to possibly fix the data toggle */
+ ep_data->dev = usb_get_dev(urb->dev);
+ hep->hcpriv = ep_data;
+
+ /* For ISOC and INT endpoints, start ASAP: */
+ ep_data->next_frame = frame_add(c67x00->current_frame, 1);
+
+ /* Add the endpoint data to one of the pipe lists; must be added
+ in order of endpoint address */
+ type = usb_pipetype(urb->pipe);
+ if (list_empty(&ep_data->node)) {
+ list_add(&ep_data->node, &c67x00->list[type]);
+ } else {
+ struct c67x00_ep_data *prev;
+
+ list_for_each_entry(prev, &c67x00->list[type], node) {
+ if (prev->hep->desc.bEndpointAddress >
+ hep->desc.bEndpointAddress) {
+ list_add(&ep_data->node, prev->node.prev);
+ break;
+ }
+ }
+ }
+
+ return ep_data;
+}
+
+static int c67x00_ep_data_free(struct usb_host_endpoint *hep)
+{
+ struct c67x00_ep_data *ep_data = hep->hcpriv;
+
+ if (!ep_data)
+ return 0;
+
+ if (!list_empty(&ep_data->queue))
+ return -EBUSY;
+
+ usb_put_dev(ep_data->dev);
+ list_del(&ep_data->queue);
+ list_del(&ep_data->node);
+
+ kfree(ep_data);
+ hep->hcpriv = NULL;
+
+ return 0;
+}
+
+void c67x00_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+ struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+ unsigned long flags;
+
+ if (!list_empty(&ep->urb_list))
+ dev_warn(c67x00_hcd_dev(c67x00), "error: urb list not empty\n");
+
+ spin_lock_irqsave(&c67x00->lock, flags);
+
+ /* loop waiting for all transfers in the endpoint queue to complete */
+ while (c67x00_ep_data_free(ep)) {
+ /* Drop the lock so we can sleep waiting for the hardware */
+ spin_unlock_irqrestore(&c67x00->lock, flags);
+
+ /* it could happen that we reinitialize this completion, while
+ * somebody was waiting for that completion. The timeout and
+ * while loop handle such cases, but this might be improved */
+ INIT_COMPLETION(c67x00->endpoint_disable);
+ c67x00_sched_kick(c67x00);
+ wait_for_completion_timeout(&c67x00->endpoint_disable, 1 * HZ);
+
+ spin_lock_irqsave(&c67x00->lock, flags);
+ }
+
+ spin_unlock_irqrestore(&c67x00->lock, flags);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static inline int get_root_port(struct usb_device *dev)
+{
+ while (dev->parent->parent)
+ dev = dev->parent;
+ return dev->portnum;
+}
+
+int c67x00_urb_enqueue(struct usb_hcd *hcd,
+ struct urb *urb, gfp_t mem_flags)
+{
+ int ret;
+ unsigned long flags;
+ struct c67x00_urb_priv *urbp;
+ struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+ int port = get_root_port(urb->dev)-1;
+
+ spin_lock_irqsave(&c67x00->lock, flags);
+
+ /* Make sure host controller is running */
+ if (!HC_IS_RUNNING(hcd->state)) {
+ ret = -ENODEV;
+ goto err_not_linked;
+ }
+
+ ret = usb_hcd_link_urb_to_ep(hcd, urb);
+ if (ret)
+ goto err_not_linked;
+
+ /* Allocate and initialize urb private data */
+ urbp = kzalloc(sizeof(*urbp), mem_flags);
+ if (!urbp) {
+ ret = -ENOMEM;
+ goto err_urbp;
+ }
+
+ INIT_LIST_HEAD(&urbp->hep_node);
+ urbp->urb = urb;
+ urbp->port = port;
+
+ urbp->ep_data = c67x00_ep_data_alloc(c67x00, urb);
+
+ if (!urbp->ep_data) {
+ ret = -ENOMEM;
+ goto err_epdata;
+ }
+
+ /* TODO claim bandwidth with usb_claim_bandwidth?
+ * also release it somewhere! */
+
+ urb->hcpriv = urbp;
+
+ urb->actual_length = 0; /* Nothing received/transmitted yet */
+
+ switch (usb_pipetype(urb->pipe)) {
+ case PIPE_CONTROL:
+ urb->interval = SETUP_STAGE;
+ break;
+ case PIPE_INTERRUPT:
+ break;
+ case PIPE_BULK:
+ break;
+ case PIPE_ISOCHRONOUS:
+ if (c67x00->urb_iso_count == 0)
+ c67x00->max_frame_bw = MAX_FRAME_BW_ISO;
+ c67x00->urb_iso_count++;
+ /* Assume always URB_ISO_ASAP, FIXME */
+ if (list_empty(&urbp->ep_data->queue))
+ urb->start_frame = urbp->ep_data->next_frame;
+ else {
+ /* Go right after the last one */
+ struct urb *last_urb;
+
+ last_urb = list_entry(urbp->ep_data->queue.prev,
+ struct c67x00_urb_priv,
+ hep_node)->urb;
+ urb->start_frame =
+ frame_add(last_urb->start_frame,
+ last_urb->number_of_packets *
+ last_urb->interval);
+ }
+ urbp->cnt = 0;
+ break;
+ }
+
+ /* Add the URB to the endpoint queue */
+ list_add_tail(&urbp->hep_node, &urbp->ep_data->queue);
+
+ /* If this is the only URB, kick start the controller */
+ if (!c67x00->urb_count++)
+ c67x00_ll_hpi_enable_sofeop(c67x00->sie);
+
+ c67x00_sched_kick(c67x00);
+ spin_unlock_irqrestore(&c67x00->lock, flags);
+
+ return 0;
+
+err_epdata:
+ kfree(urbp);
+err_urbp:
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+err_not_linked:
+ spin_unlock_irqrestore(&c67x00->lock, flags);
+
+ return ret;
+}
+
+int c67x00_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+ struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&c67x00->lock, flags);
+ rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (rc)
+ goto done;
+
+ c67x00_release_urb(c67x00, urb);
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+
+ spin_unlock(&c67x00->lock);
+ usb_hcd_giveback_urb(hcd, urb, status);
+ spin_lock(&c67x00->lock);
+
+ spin_unlock_irqrestore(&c67x00->lock, flags);
+
+ return 0;
+
+ done:
+ spin_unlock_irqrestore(&c67x00->lock, flags);
+ return rc;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * pre: c67x00 locked, urb unlocked
+ */
+static void
+c67x00_giveback_urb(struct c67x00_hcd *c67x00, struct urb *urb, int status)
+{
+ struct c67x00_urb_priv *urbp;
+
+ if (!urb)
+ return;
+
+ urbp = urb->hcpriv;
+ urbp->status = status;
+
+ list_del_init(&urbp->hep_node);
+
+ c67x00_release_urb(c67x00, urb);
+ usb_hcd_unlink_urb_from_ep(c67x00_hcd_to_hcd(c67x00), urb);
+ spin_unlock(&c67x00->lock);
+ usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status);
+ spin_lock(&c67x00->lock);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int c67x00_claim_frame_bw(struct c67x00_hcd *c67x00, struct urb *urb,
+ int len, int periodic)
+{
+ struct c67x00_urb_priv *urbp = urb->hcpriv;
+ int bit_time;
+
+ /* According to the C67x00 BIOS user manual, page 3-18,19, the
+ * following calculations provide the full speed bit times for
+ * a transaction.
+ *
+ * FS(in) = 112.5 + 9.36*BC + HOST_DELAY
+ * FS(in,iso) = 90.5 + 9.36*BC + HOST_DELAY
+ * FS(out) = 112.5 + 9.36*BC + HOST_DELAY
+ * FS(out,iso) = 78.4 + 9.36*BC + HOST_DELAY
+ * LS(in) = 802.4 + 75.78*BC + HOST_DELAY
+ * LS(out) = 802.6 + 74.67*BC + HOST_DELAY
+ *
+ * HOST_DELAY == 106 for the c67200 and c67300.
+ */
+
+ /* make calculations in 1/100 bit times to maintain resolution */
+ if (urbp->ep_data->dev->speed == USB_SPEED_LOW) {
+ /* Low speed pipe */
+ if (usb_pipein(urb->pipe))
+ bit_time = 80240 + 7578*len;
+ else
+ bit_time = 80260 + 7467*len;
+ } else {
+ /* FS pipes */
+ if (usb_pipeisoc(urb->pipe))
+ bit_time = usb_pipein(urb->pipe) ? 9050 : 7840;
+ else
+ bit_time = 11250;
+ bit_time += 936*len;
+ }
+
+ /* Scale back down to integer bit times. Use a host delay of 106.
+ * (this is the only place it is used) */
+ bit_time = ((bit_time+50) / 100) + 106;
+
+ if (unlikely(bit_time + c67x00->bandwidth_allocated >=
+ c67x00->max_frame_bw))
+ return -EMSGSIZE;
+
+ if (unlikely(c67x00->next_td_addr + CY_TD_SIZE >=
+ c67x00->td_base_addr + SIE_TD_SIZE))
+ return -EMSGSIZE;
+
+ if (unlikely(c67x00->next_buf_addr + len >=
+ c67x00->buf_base_addr + SIE_TD_BUF_SIZE))
+ return -EMSGSIZE;
+
+ if (periodic) {
+ if (unlikely(bit_time + c67x00->periodic_bw_allocated >=
+ MAX_PERIODIC_BW(c67x00->max_frame_bw)))
+ return -EMSGSIZE;
+ c67x00->periodic_bw_allocated += bit_time;
+ }
+
+ c67x00->bandwidth_allocated += bit_time;
+ return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * td_addr and buf_addr must be word aligned
+ */
+static int c67x00_create_td(struct c67x00_hcd *c67x00, struct urb *urb,
+ void *data, int len, int pid, int toggle,
+ unsigned long privdata)
+{
+ struct c67x00_td *td;
+ struct c67x00_urb_priv *urbp = urb->hcpriv;
+ const __u8 active_flag = 1, retry_cnt = 1;
+ __u8 cmd = 0;
+ int tt = 0;
+
+ if (c67x00_claim_frame_bw(c67x00, urb, len, usb_pipeisoc(urb->pipe)
+ || usb_pipeint(urb->pipe)))
+ return -EMSGSIZE; /* Not really an error, but expected */
+
+ td = kzalloc(sizeof(*td), GFP_ATOMIC);
+ if (!td)
+ return -ENOMEM;
+
+ td->pipe = urb->pipe;
+ td->ep_data = urbp->ep_data;
+
+ if ((td_udev(td)->speed == USB_SPEED_LOW) &&
+ !(c67x00->low_speed_ports & (1 << urbp->port)))
+ cmd |= PREAMBLE_EN;
+
+ switch (usb_pipetype(td->pipe)) {
+ case PIPE_ISOCHRONOUS:
+ tt = TT_ISOCHRONOUS;
+ cmd |= ISO_EN;
+ break;
+ case PIPE_CONTROL:
+ tt = TT_CONTROL;
+ break;
+ case PIPE_BULK:
+ tt = TT_BULK;
+ break;
+ case PIPE_INTERRUPT:
+ tt = TT_INTERRUPT;
+ break;
+ }
+
+ if (toggle)
+ cmd |= SEQ_SEL;
+
+ cmd |= ARM_EN;
+
+ /* SW part */
+ td->td_addr = c67x00->next_td_addr;
+ c67x00->next_td_addr = c67x00->next_td_addr + CY_TD_SIZE;
+
+ /* HW part */
+ td->ly_base_addr = __cpu_to_le16(c67x00->next_buf_addr);
+ td->port_length = __cpu_to_le16((c67x00->sie->sie_num << 15) |
+ (urbp->port << 14) | (len & 0x3FF));
+ td->pid_ep = ((pid & 0xF) << TD_PIDEP_OFFSET) |
+ (usb_pipeendpoint(td->pipe) & 0xF);
+ td->dev_addr = usb_pipedevice(td->pipe) & 0x7F;
+ td->ctrl_reg = cmd;
+ td->status = 0;
+ td->retry_cnt = (tt << TT_OFFSET) | (active_flag << 4) | retry_cnt;
+ td->residue = 0;
+ td->next_td_addr = __cpu_to_le16(c67x00->next_td_addr);
+
+ /* SW part */
+ td->data = data;
+ td->urb = urb;
+ td->privdata = privdata;
+
+ c67x00->next_buf_addr += (len + 1) & ~0x01; /* properly align */
+
+ list_add_tail(&td->td_list, &c67x00->td_list);
+ return 0;
+}
+
+static inline void c67x00_release_td(struct c67x00_td *td)
+{
+ list_del_init(&td->td_list);
+ kfree(td);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int c67x00_add_data_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+ int remaining;
+ int toggle;
+ int pid;
+ int ret = 0;
+ int maxps;
+ int need_empty;
+
+ toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+ usb_pipeout(urb->pipe));
+ remaining = urb->transfer_buffer_length - urb->actual_length;
+
+ maxps = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
+
+ need_empty = (urb->transfer_flags & URB_ZERO_PACKET) &&
+ usb_pipeout(urb->pipe) && !(remaining % maxps);
+
+ while (remaining || need_empty) {
+ int len;
+ char *td_buf;
+
+ len = (remaining > maxps) ? maxps : remaining;
+ if (!len)
+ need_empty = 0;
+
+ pid = usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN;
+ td_buf = urb->transfer_buffer + urb->transfer_buffer_length -
+ remaining;
+ ret = c67x00_create_td(c67x00, urb, td_buf, len, pid, toggle,
+ DATA_STAGE);
+ if (ret)
+ return ret; /* td wasn't created */
+
+ toggle ^= 1;
+ remaining -= len;
+ if (usb_pipecontrol(urb->pipe))
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * return 0 in case more bandwidth is available, else errorcode
+ */
+static int c67x00_add_ctrl_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+ int ret;
+ int pid;
+
+ switch (urb->interval) {
+ default:
+ case SETUP_STAGE:
+ ret = c67x00_create_td(c67x00, urb, urb->setup_packet,
+ 8, USB_PID_SETUP, 0, SETUP_STAGE);
+ if (ret)
+ return ret;
+ urb->interval = SETUP_STAGE;
+ usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+ usb_pipeout(urb->pipe), 1);
+ break;
+ case DATA_STAGE:
+ if (urb->transfer_buffer_length) {
+ ret = c67x00_add_data_urb(c67x00, urb);
+ if (ret)
+ return ret;
+ break;
+ } /* else fallthrough */
+ case STATUS_STAGE:
+ pid = !usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN;
+ ret = c67x00_create_td(c67x00, urb, NULL, 0, pid, 1,
+ STATUS_STAGE);
+ if (ret)
+ return ret;
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * return 0 in case more bandwidth is available, else errorcode
+ */
+static int c67x00_add_int_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+ struct c67x00_urb_priv *urbp = urb->hcpriv;
+
+ if (frame_after_eq(c67x00->current_frame, urbp->ep_data->next_frame)) {
+ urbp->ep_data->next_frame =
+ frame_add(urbp->ep_data->next_frame, urb->interval);
+ return c67x00_add_data_urb(c67x00, urb);
+ }
+ return 0;
+}
+
+static int c67x00_add_iso_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+ struct c67x00_urb_priv *urbp = urb->hcpriv;
+
+ if (frame_after_eq(c67x00->current_frame, urbp->ep_data->next_frame)) {
+ char *td_buf;
+ int len, pid, ret;
+
+ BUG_ON(urbp->cnt >= urb->number_of_packets);
+
+ td_buf = urb->transfer_buffer +
+ urb->iso_frame_desc[urbp->cnt].offset;
+ len = urb->iso_frame_desc[urbp->cnt].length;
+ pid = usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN;
+
+ ret = c67x00_create_td(c67x00, urb, td_buf, len, pid, 0,
+ urbp->cnt);
+ if (ret) {
+ printk(KERN_DEBUG "create failed: %d\n", ret);
+ urb->iso_frame_desc[urbp->cnt].actual_length = 0;
+ urb->iso_frame_desc[urbp->cnt].status = ret;
+ if (urbp->cnt + 1 == urb->number_of_packets)
+ c67x00_giveback_urb(c67x00, urb, 0);
+ }
+
+ urbp->ep_data->next_frame =
+ frame_add(urbp->ep_data->next_frame, urb->interval);
+ urbp->cnt++;
+ }
+ return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+static void c67x00_fill_from_list(struct c67x00_hcd *c67x00, int type,
+ int (*add)(struct c67x00_hcd *, struct urb *))
+{
+ struct c67x00_ep_data *ep_data;
+ struct urb *urb;
+
+ /* traverse every endpoint on the list */
+ list_for_each_entry(ep_data, &c67x00->list[type], node) {
+ if (!list_empty(&ep_data->queue)) {
+ /* and add the first urb */
+ /* isochronous transfer rely on this */
+ urb = list_entry(ep_data->queue.next,
+ struct c67x00_urb_priv,
+ hep_node)->urb;
+ add(c67x00, urb);
+ }
+ }
+}
+
+static void c67x00_fill_frame(struct c67x00_hcd *c67x00)
+{
+ struct c67x00_td *td, *ttd;
+
+ /* Check if we can proceed */
+ if (!list_empty(&c67x00->td_list)) {
+ dev_warn(c67x00_hcd_dev(c67x00),
+ "TD list not empty! This should not happen!\n");
+ list_for_each_entry_safe(td, ttd, &c67x00->td_list, td_list) {
+ dbg_td(c67x00, td, "Unprocessed td");
+ c67x00_release_td(td);
+ }
+ }
+
+ /* Reinitialize variables */
+ c67x00->bandwidth_allocated = 0;
+ c67x00->periodic_bw_allocated = 0;
+
+ c67x00->next_td_addr = c67x00->td_base_addr;
+ c67x00->next_buf_addr = c67x00->buf_base_addr;
+
+ /* Fill the list */
+ c67x00_fill_from_list(c67x00, PIPE_ISOCHRONOUS, c67x00_add_iso_urb);
+ c67x00_fill_from_list(c67x00, PIPE_INTERRUPT, c67x00_add_int_urb);
+ c67x00_fill_from_list(c67x00, PIPE_CONTROL, c67x00_add_ctrl_urb);
+ c67x00_fill_from_list(c67x00, PIPE_BULK, c67x00_add_data_urb);
+}
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * Get TD from C67X00
+ */
+static inline void
+c67x00_parse_td(struct c67x00_hcd *c67x00, struct c67x00_td *td)
+{
+ c67x00_ll_read_mem_le16(c67x00->sie->dev,
+ td->td_addr, td, CY_TD_SIZE);
+
+ if (usb_pipein(td->pipe) && td_actual_bytes(td))
+ c67x00_ll_read_mem_le16(c67x00->sie->dev, td_ly_base_addr(td),
+ td->data, td_actual_bytes(td));
+}
+
+static int c67x00_td_to_error(struct c67x00_hcd *c67x00, struct c67x00_td *td)
+{
+ if (td->status & TD_STATUSMASK_ERR) {
+ dbg_td(c67x00, td, "ERROR_FLAG");
+ return -EILSEQ;
+ }
+ if (td->status & TD_STATUSMASK_STALL) {
+ /* dbg_td(c67x00, td, "STALL"); */
+ return -EPIPE;
+ }
+ if (td->status & TD_STATUSMASK_TMOUT) {
+ dbg_td(c67x00, td, "TIMEOUT");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static inline int c67x00_end_of_data(struct c67x00_td *td)
+{
+ int maxps, need_empty, remaining;
+ struct urb *urb = td->urb;
+ int act_bytes;
+
+ act_bytes = td_actual_bytes(td);
+
+ if (unlikely(!act_bytes))
+ return 1; /* This was an empty packet */
+
+ maxps = usb_maxpacket(td_udev(td), td->pipe, usb_pipeout(td->pipe));
+
+ if (unlikely(act_bytes < maxps))
+ return 1; /* Smaller then full packet */
+
+ remaining = urb->transfer_buffer_length - urb->actual_length;
+ need_empty = (urb->transfer_flags & URB_ZERO_PACKET) &&
+ usb_pipeout(urb->pipe) && !(remaining % maxps);
+
+ if (unlikely(!remaining && !need_empty))
+ return 1;
+
+ return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/* Remove all td's from the list which come
+ * after last_td and are meant for the same pipe.
+ * This is used when a short packet has occured */
+static inline void c67x00_clear_pipe(struct c67x00_hcd *c67x00,
+ struct c67x00_td *last_td)
+{
+ struct c67x00_td *td, *tmp;
+ td = last_td;
+ tmp = last_td;
+ while (td->td_list.next != &c67x00->td_list) {
+ td = list_entry(td->td_list.next, struct c67x00_td, td_list);
+ if (td->pipe == last_td->pipe) {
+ c67x00_release_td(td);
+ td = tmp;
+ }
+ tmp = td;
+ }
+}
+
+/* -------------------------------------------------------------------------- */
+
+static void c67x00_handle_successful_td(struct c67x00_hcd *c67x00,
+ struct c67x00_td *td)
+{
+ struct urb *urb = td->urb;
+
+ if (!urb)
+ return;
+
+ urb->actual_length += td_actual_bytes(td);
+
+ switch (usb_pipetype(td->pipe)) {
+ /* isochronous tds are handled separately */
+ case PIPE_CONTROL:
+ switch (td->privdata) {
+ case SETUP_STAGE:
+ urb->interval =
+ urb->transfer_buffer_length ?
+ DATA_STAGE : STATUS_STAGE;
+ /* Don't count setup_packet with normal data: */
+ urb->actual_length = 0;
+ break;
+
+ case DATA_STAGE:
+ if (c67x00_end_of_data(td)) {
+ urb->interval = STATUS_STAGE;
+ c67x00_clear_pipe(c67x00, td);
+ }
+ break;
+
+ case STATUS_STAGE:
+ urb->interval = 0;
+ c67x00_giveback_urb(c67x00, urb, 0);
+ break;
+ }
+ break;
+
+ case PIPE_INTERRUPT:
+ case PIPE_BULK:
+ if (unlikely(c67x00_end_of_data(td))) {
+ c67x00_clear_pipe(c67x00, td);
+ c67x00_giveback_urb(c67x00, urb, 0);
+ }
+ break;
+ }
+}
+
+static void c67x00_handle_isoc(struct c67x00_hcd *c67x00, struct c67x00_td *td)
+{
+ struct urb *urb = td->urb;
+ struct c67x00_urb_priv *urbp;
+ int cnt;
+
+ if (!urb)
+ return;
+
+ urbp = urb->hcpriv;
+ cnt = td->privdata;
+
+ if (td->status & TD_ERROR_MASK)
+ urb->error_count++;
+
+ urb->iso_frame_desc[cnt].actual_length = td_actual_bytes(td);
+ urb->iso_frame_desc[cnt].status = c67x00_td_to_error(c67x00, td);
+ if (cnt + 1 == urb->number_of_packets) /* Last packet */
+ c67x00_giveback_urb(c67x00, urb, 0);
+}
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * c67x00_check_td_list - handle tds which have been processed by the c67x00
+ * pre: current_td == 0
+ */
+static inline void c67x00_check_td_list(struct c67x00_hcd *c67x00)
+{
+ struct c67x00_td *td, *tmp;
+ struct urb *urb;
+ int ack_ok;
+ int clear_endpoint;
+
+ list_for_each_entry_safe(td, tmp, &c67x00->td_list, td_list) {
+ /* get the TD */
+ c67x00_parse_td(c67x00, td);
+ urb = td->urb; /* urb can be NULL! */
+ ack_ok = 0;
+ clear_endpoint = 1;
+
+ /* Handle isochronous transfers separately */
+ if (usb_pipeisoc(td->pipe)) {
+ clear_endpoint = 0;
+ c67x00_handle_isoc(c67x00, td);
+ goto cont;
+ }
+
+ /* When an error occurs, all td's for that pipe go into an
+ * inactive state. This state matches successful transfers so
+ * we must make sure not to service them. */
+ if (td->status & TD_ERROR_MASK) {
+ c67x00_giveback_urb(c67x00, urb,
+ c67x00_td_to_error(c67x00, td));
+ goto cont;
+ }
+
+ if ((td->status & TD_STATUSMASK_NAK) || !td_sequence_ok(td) ||
+ !td_acked(td))
+ goto cont;
+
+ /* Sequence ok and acked, don't need to fix toggle */
+ ack_ok = 1;
+
+ if (unlikely(td->status & TD_STATUSMASK_OVF)) {
+ if (td_residue(td) & TD_RESIDUE_OVERFLOW) {
+ /* Overflow */
+ c67x00_giveback_urb(c67x00, urb, -EOVERFLOW);
+ goto cont;
+ }
+ }
+
+ clear_endpoint = 0;
+ c67x00_handle_successful_td(c67x00, td);
+
+cont:
+ if (clear_endpoint)
+ c67x00_clear_pipe(c67x00, td);
+ if (ack_ok)
+ usb_settoggle(td_udev(td), usb_pipeendpoint(td->pipe),
+ usb_pipeout(td->pipe),
+ !(td->ctrl_reg & SEQ_SEL));
+ /* next in list could have been removed, due to clear_pipe! */
+ tmp = list_entry(td->td_list.next, typeof(*td), td_list);
+ c67x00_release_td(td);
+ }
+}
+
+/* -------------------------------------------------------------------------- */
+
+static inline int c67x00_all_tds_processed(struct c67x00_hcd *c67x00)
+{
+ /* If all tds are processed, we can check the previous frame (if
+ * there was any) and start our next frame.
+ */
+ return !c67x00_ll_husb_get_current_td(c67x00->sie);
+}
+
+/**
+ * Send td to C67X00
+ */
+static void c67x00_send_td(struct c67x00_hcd *c67x00, struct c67x00_td *td)
+{
+ int len = td_length(td);
+
+ if (len && ((td->pid_ep & TD_PIDEPMASK_PID) != TD_PID_IN))
+ c67x00_ll_write_mem_le16(c67x00->sie->dev, td_ly_base_addr(td),
+ td->data, len);
+
+ c67x00_ll_write_mem_le16(c67x00->sie->dev,
+ td->td_addr, td, CY_TD_SIZE);
+}
+
+static void c67x00_send_frame(struct c67x00_hcd *c67x00)
+{
+ struct c67x00_td *td;
+
+ if (list_empty(&c67x00->td_list))
+ dev_warn(c67x00_hcd_dev(c67x00),
+ "%s: td list should not be empty here!\n",
+ __func__);
+
+ list_for_each_entry(td, &c67x00->td_list, td_list) {
+ if (td->td_list.next == &c67x00->td_list)
+ td->next_td_addr = 0; /* Last td in list */
+
+ c67x00_send_td(c67x00, td);
+ }
+
+ c67x00_ll_husb_set_current_td(c67x00->sie, c67x00->td_base_addr);
+}
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * c67x00_do_work - Schedulers state machine
+ */
+static void c67x00_do_work(struct c67x00_hcd *c67x00)
+{
+ spin_lock(&c67x00->lock);
+ /* Make sure all tds are processed */
+ if (!c67x00_all_tds_processed(c67x00))
+ goto out;
+
+ c67x00_check_td_list(c67x00);
+
+ /* no td's are being processed (current == 0)
+ * and all have been "checked" */
+ complete(&c67x00->endpoint_disable);
+
+ if (!list_empty(&c67x00->td_list))
+ goto out;
+
+ c67x00->current_frame = c67x00_get_current_frame_number(c67x00);
+ if (c67x00->current_frame == c67x00->last_frame)
+ goto out; /* Don't send tds in same frame */
+ c67x00->last_frame = c67x00->current_frame;
+
+ /* If no urbs are scheduled, our work is done */
+ if (!c67x00->urb_count) {
+ c67x00_ll_hpi_disable_sofeop(c67x00->sie);
+ goto out;
+ }
+
+ c67x00_fill_frame(c67x00);
+ if (!list_empty(&c67x00->td_list))
+ /* TD's have been added to the frame */
+ c67x00_send_frame(c67x00);
+
+ out:
+ spin_unlock(&c67x00->lock);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static void c67x00_sched_tasklet(unsigned long __c67x00)
+{
+ struct c67x00_hcd *c67x00 = (struct c67x00_hcd *)__c67x00;
+ c67x00_do_work(c67x00);
+}
+
+void c67x00_sched_kick(struct c67x00_hcd *c67x00)
+{
+ tasklet_hi_schedule(&c67x00->tasklet);
+}
+
+int c67x00_sched_start_scheduler(struct c67x00_hcd *c67x00)
+{
+ tasklet_init(&c67x00->tasklet, c67x00_sched_tasklet,
+ (unsigned long)c67x00);
+ return 0;
+}
+
+void c67x00_sched_stop_scheduler(struct c67x00_hcd *c67x00)
+{
+ tasklet_kill(&c67x00->tasklet);
+}
diff --git a/drivers/usb/c67x00/c67x00.h b/drivers/usb/c67x00/c67x00.h
new file mode 100644
index 0000000..a26e9de
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00.h
@@ -0,0 +1,294 @@
+/*
+ * c67x00.h: Cypress C67X00 USB register and field definitions
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ * Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ * based on multiple host controller drivers inside the linux kernel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA.
+ */
+
+#ifndef _USB_C67X00_H
+#define _USB_C67X00_H
+
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+
+/* ---------------------------------------------------------------------
+ * Cypress C67x00 register definitions
+ */
+
+/* Hardware Revision Register */
+#define HW_REV_REG 0xC004
+
+/* General USB registers */
+/* ===================== */
+
+/* USB Control Register */
+#define USB_CTL_REG(x) ((x) ? 0xC0AA : 0xC08A)
+
+#define LOW_SPEED_PORT(x) ((x) ? 0x0800 : 0x0400)
+#define HOST_MODE 0x0200
+#define PORT_RES_EN(x) ((x) ? 0x0100 : 0x0080)
+#define SOF_EOP_EN(x) ((x) ? 0x0002 : 0x0001)
+
+/* USB status register - Notice it has different content in hcd/udc mode */
+#define USB_STAT_REG(x) ((x) ? 0xC0B0 : 0xC090)
+
+#define EP0_IRQ_FLG 0x0001
+#define EP1_IRQ_FLG 0x0002
+#define EP2_IRQ_FLG 0x0004
+#define EP3_IRQ_FLG 0x0008
+#define EP4_IRQ_FLG 0x0010
+#define EP5_IRQ_FLG 0x0020
+#define EP6_IRQ_FLG 0x0040
+#define EP7_IRQ_FLG 0x0080
+#define RESET_IRQ_FLG 0x0100
+#define SOF_EOP_IRQ_FLG 0x0200
+#define ID_IRQ_FLG 0x4000
+#define VBUS_IRQ_FLG 0x8000
+
+/* USB Host only registers */
+/* ======================= */
+
+/* Host n Control Register */
+#define HOST_CTL_REG(x) ((x) ? 0xC0A0 : 0xC080)
+
+#define PREAMBLE_EN 0x0080 /* Preamble enable */
+#define SEQ_SEL 0x0040 /* Data Toggle Sequence Bit Select */
+#define ISO_EN 0x0010 /* Isochronous enable */
+#define ARM_EN 0x0001 /* Arm operation */
+
+/* Host n Interrupt Enable Register */
+#define HOST_IRQ_EN_REG(x) ((x) ? 0xC0AC : 0xC08C)
+
+#define SOF_EOP_IRQ_EN 0x0200 /* SOF/EOP Interrupt Enable */
+#define SOF_EOP_TMOUT_IRQ_EN 0x0800 /* SOF/EOP Timeout Interrupt Enable */
+#define ID_IRQ_EN 0x4000 /* ID interrupt enable */
+#define VBUS_IRQ_EN 0x8000 /* VBUS interrupt enable */
+#define DONE_IRQ_EN 0x0001 /* Done Interrupt Enable */
+
+/* USB status register */
+#define HOST_STAT_MASK 0x02FD
+#define PORT_CONNECT_CHANGE(x) ((x) ? 0x0020 : 0x0010)
+#define PORT_SE0_STATUS(x) ((x) ? 0x0008 : 0x0004)
+
+/* Host Frame Register */
+#define HOST_FRAME_REG(x) ((x) ? 0xC0B6 : 0xC096)
+
+#define HOST_FRAME_MASK 0x07FF
+
+/* USB Peripheral only registers */
+/* ============================= */
+
+/* Device n Port Sel reg */
+#define DEVICE_N_PORT_SEL(x) ((x) ? 0xC0A4 : 0xC084)
+
+/* Device n Interrupt Enable Register */
+#define DEVICE_N_IRQ_EN_REG(x) ((x) ? 0xC0AC : 0xC08C)
+
+#define DEVICE_N_ENDPOINT_N_CTL_REG(dev, ep) ((dev) \
+ ? (0x0280 + (ep << 4)) \
+ : (0x0200 + (ep << 4)))
+#define DEVICE_N_ENDPOINT_N_STAT_REG(dev, ep) ((dev) \
+ ? (0x0286 + (ep << 4)) \
+ : (0x0206 + (ep << 4)))
+
+#define DEVICE_N_ADDRESS(dev) ((dev) ? (0xC0AE) : (0xC08E))
+
+/* HPI registers */
+/* ============= */
+
+/* HPI Status register */
+#define SOFEOP_FLG(x) (1 << ((x) ? 12 : 10))
+#define SIEMSG_FLG(x) (1 << (4 + (x)))
+#define RESET_FLG(x) ((x) ? 0x0200 : 0x0002)
+#define DONE_FLG(x) (1 << (2 + (x)))
+#define RESUME_FLG(x) (1 << (6 + (x)))
+#define MBX_OUT_FLG 0x0001 /* Message out available */
+#define MBX_IN_FLG 0x0100
+#define ID_FLG 0x4000
+#define VBUS_FLG 0x8000
+
+/* Interrupt routing register */
+#define HPI_IRQ_ROUTING_REG 0x0142
+
+#define HPI_SWAP_ENABLE(x) ((x) ? 0x0100 : 0x0001)
+#define RESET_TO_HPI_ENABLE(x) ((x) ? 0x0200 : 0x0002)
+#define DONE_TO_HPI_ENABLE(x) ((x) ? 0x0008 : 0x0004)
+#define RESUME_TO_HPI_ENABLE(x) ((x) ? 0x0080 : 0x0040)
+#define SOFEOP_TO_HPI_EN(x) ((x) ? 0x2000 : 0x0800)
+#define SOFEOP_TO_CPU_EN(x) ((x) ? 0x1000 : 0x0400)
+#define ID_TO_HPI_ENABLE 0x4000
+#define VBUS_TO_HPI_ENABLE 0x8000
+
+/* SIE msg registers */
+#define SIEMSG_REG(x) ((x) ? 0x0148 : 0x0144)
+
+#define HUSB_TDListDone 0x1000
+
+#define SUSB_EP0_MSG 0x0001
+#define SUSB_EP1_MSG 0x0002
+#define SUSB_EP2_MSG 0x0004
+#define SUSB_EP3_MSG 0x0008
+#define SUSB_EP4_MSG 0x0010
+#define SUSB_EP5_MSG 0x0020
+#define SUSB_EP6_MSG 0x0040
+#define SUSB_EP7_MSG 0x0080
+#define SUSB_RST_MSG 0x0100
+#define SUSB_SOF_MSG 0x0200
+#define SUSB_CFG_MSG 0x0400
+#define SUSB_SUS_MSG 0x0800
+#define SUSB_ID_MSG 0x4000
+#define SUSB_VBUS_MSG 0x8000
+
+/* BIOS interrupt routines */
+
+#define SUSBx_RECEIVE_INT(x) ((x) ? 97 : 81)
+#define SUSBx_SEND_INT(x) ((x) ? 96 : 80)
+
+#define SUSBx_DEV_DESC_VEC(x) ((x) ? 0x00D4 : 0x00B4)
+#define SUSBx_CONF_DESC_VEC(x) ((x) ? 0x00D6 : 0x00B6)
+#define SUSBx_STRING_DESC_VEC(x) ((x) ? 0x00D8 : 0x00B8)
+
+#define CY_HCD_BUF_ADDR 0x500 /* Base address for host */
+#define SIE_TD_SIZE 0x200 /* size of the td list */
+#define SIE_TD_BUF_SIZE 0x400 /* size of the data buffer */
+
+#define SIE_TD_OFFSET(host) ((host) ? (SIE_TD_SIZE+SIE_TD_BUF_SIZE) : 0)
+#define SIE_BUF_OFFSET(host) (SIE_TD_OFFSET(host) + SIE_TD_SIZE)
+
+/* Base address of HCD + 2 x TD_SIZE + 2 x TD_BUF_SIZE */
+#define CY_UDC_REQ_HEADER_BASE 0x1100
+/* 8- byte request headers for IN/OUT transfers */
+#define CY_UDC_REQ_HEADER_SIZE 8
+
+#define CY_UDC_REQ_HEADER_ADDR(ep_num) (CY_UDC_REQ_HEADER_BASE + \
+ ((ep_num) * CY_UDC_REQ_HEADER_SIZE))
+#define CY_UDC_DESC_BASE_ADDRESS (CY_UDC_REQ_HEADER_ADDR(8))
+
+#define CY_UDC_BIOS_REPLACE_BASE 0x1800
+#define CY_UDC_REQ_BUFFER_BASE 0x2000
+#define CY_UDC_REQ_BUFFER_SIZE 0x0400
+#define CY_UDC_REQ_BUFFER_ADDR(ep_num) (CY_UDC_REQ_BUFFER_BASE + \
+ ((ep_num) * CY_UDC_REQ_BUFFER_SIZE))
+
+/* ---------------------------------------------------------------------
+ * Driver data structures
+ */
+
+struct c67x00_device;
+
+/**
+ * struct c67x00_sie - Common data associated with a SIE
+ * @lock: lock to protect this struct and the associated chip registers
+ * @private_data: subdriver dependent data
+ * @irq: subdriver dependent irq handler, set NULL when not used
+ * @dev: link to common driver structure
+ * @sie_num: SIE number on chip, starting from 0
+ * @mode: SIE mode (host/peripheral/otg/not used)
+ */
+struct c67x00_sie {
+ /* Entries to be used by the subdrivers */
+ spinlock_t lock; /* protect this structure */
+ void *private_data;
+ void (*irq) (struct c67x00_sie *sie, u16 int_status, u16 msg);
+
+ /* Read only: */
+ struct c67x00_device *dev;
+ int sie_num;
+ int mode;
+};
+
+#define sie_dev(s) (&(s)->dev->pdev->dev)
+
+/**
+ * struct c67x00_lcp
+ */
+struct c67x00_lcp {
+ /* Internal use only */
+ struct mutex mutex;
+ struct completion msg_received;
+ u16 last_msg;
+};
+
+/*
+ * struct c67x00_hpi
+ */
+struct c67x00_hpi {
+ void __iomem *base;
+ int regstep;
+ spinlock_t lock;
+ struct c67x00_lcp lcp;
+};
+
+#define C67X00_SIES 2
+#define C67X00_PORTS 2
+
+/**
+ * struct c67x00_device - Common data associated with a c67x00 instance
+ * @hpi: hpi addresses
+ * @sie: array of sie's on this chip
+ * @pdev: platform device of instance
+ * @pdata: configuration provided by the platform
+ */
+struct c67x00_device {
+ struct c67x00_hpi hpi;
+ struct c67x00_sie sie[C67X00_SIES];
+ struct platform_device *pdev;
+ struct c67x00_platform_data *pdata;
+};
+
+/* ---------------------------------------------------------------------
+ * Low level interface functions
+ */
+
+/* Host Port Interface (HPI) functions */
+u16 c67x00_ll_hpi_status(struct c67x00_device *dev);
+void c67x00_ll_hpi_reg_init(struct c67x00_device *dev);
+void c67x00_ll_hpi_enable_sofeop(struct c67x00_sie *sie);
+void c67x00_ll_hpi_disable_sofeop(struct c67x00_sie *sie);
+
+/* General functions */
+u16 c67x00_ll_fetch_siemsg(struct c67x00_device *dev, int sie_num);
+u16 c67x00_ll_get_usb_ctl(struct c67x00_sie *sie);
+void c67x00_ll_usb_clear_status(struct c67x00_sie *sie, u16 bits);
+u16 c67x00_ll_usb_get_status(struct c67x00_sie *sie);
+void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr,
+ void *data, int len);
+void c67x00_ll_read_mem_le16(struct c67x00_device *dev, u16 addr,
+ void *data, int len);
+
+/* Host specific functions */
+void c67x00_ll_set_husb_eot(struct c67x00_device *dev, u16 value);
+void c67x00_ll_husb_reset(struct c67x00_sie *sie, int port);
+void c67x00_ll_husb_set_current_td(struct c67x00_sie *sie, u16 addr);
+u16 c67x00_ll_husb_get_current_td(struct c67x00_sie *sie);
+u16 c67x00_ll_husb_get_frame(struct c67x00_sie *sie);
+void c67x00_ll_husb_init_host_port(struct c67x00_sie *sie);
+void c67x00_ll_husb_reset_port(struct c67x00_sie *sie, int port);
+
+/* Called by c67x00_irq to handle lcp interrupts */
+void c67x00_ll_irq(struct c67x00_device *dev, u16 int_status);
+
+/* Setup and teardown */
+void c67x00_ll_init(struct c67x00_device *dev);
+void c67x00_ll_release(struct c67x00_device *dev);
+int c67x00_ll_reset(struct c67x00_device *dev);
+
+#endif /* _USB_C67X00_H */
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index e819e53..3e69266 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -394,7 +394,9 @@
if (!io->urbs)
goto nomem;
- urb_flags = URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT;
+ urb_flags = URB_NO_INTERRUPT;
+ if (dma)
+ urb_flags |= URB_NO_TRANSFER_DMA_MAP;
if (usb_pipein(pipe))
urb_flags |= URB_SHORT_NOT_OK;
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index f7b5465..6e784d2 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -231,6 +231,26 @@
However, this problem is improved if change a value of
NET_IP_ALIGN to 4.
+config USB_GADGET_PXA27X
+ boolean "PXA 27x"
+ depends on ARCH_PXA && PXA27x
+ help
+ Intel's PXA 27x series XScale ARM v5TE processors include
+ an integrated full speed USB 1.1 device controller.
+
+ It has up to 23 endpoints, as well as endpoint zero (for
+ control transfers).
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "pxa27x_udc" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_PXA27X
+ tristate
+ depends on USB_GADGET_PXA27X
+ default USB_GADGET
+ select USB_GADGET_SELECTED
+
config USB_GADGET_GOKU
boolean "Toshiba TC86C001 'Goku-S'"
depends on PCI
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index c3aab80..1235725 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -9,6 +9,7 @@
obj-$(CONFIG_USB_NET2280) += net2280.o
obj-$(CONFIG_USB_AMD5536UDC) += amd5536udc.o
obj-$(CONFIG_USB_PXA2XX) += pxa2xx_udc.o
+obj-$(CONFIG_USB_PXA27X) += pxa27x_udc.o
obj-$(CONFIG_USB_GOKU) += goku_udc.o
obj-$(CONFIG_USB_OMAP) += omap_udc.o
obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index bb93bdd7..8d61ea6 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -235,10 +235,6 @@
#define DEV_CONFIG_CDC
#endif
-#ifdef CONFIG_USB_GADGET_PXA27X
-#define DEV_CONFIG_CDC
-#endif
-
#ifdef CONFIG_USB_GADGET_S3C2410
#define DEV_CONFIG_CDC
#endif
@@ -270,6 +266,10 @@
#define DEV_CONFIG_SUBSET
#endif
+#ifdef CONFIG_USB_GADGET_PXA27X
+#define DEV_CONFIG_SUBSET
+#endif
+
#ifdef CONFIG_USB_GADGET_SUPERH
#define DEV_CONFIG_SUBSET
#endif
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index bf3f946..47bb9f0 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -2307,6 +2307,29 @@
return rc;
}
+static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
+{
+ int rc;
+
+ DBG(fsg, "bulk-in set wedge\n");
+ rc = usb_ep_set_wedge(fsg->bulk_in);
+ if (rc == -EAGAIN)
+ VDBG(fsg, "delayed bulk-in endpoint wedge\n");
+ while (rc != 0) {
+ if (rc != -EAGAIN) {
+ WARN(fsg, "usb_ep_set_wedge -> %d\n", rc);
+ rc = 0;
+ break;
+ }
+
+ /* Wait for a short time and then try again */
+ if (msleep_interruptible(100) != 0)
+ return -EINTR;
+ rc = usb_ep_set_wedge(fsg->bulk_in);
+ }
+ return rc;
+}
+
static int pad_with_zeros(struct fsg_dev *fsg)
{
struct fsg_buffhd *bh = fsg->next_buffhd_to_fill;
@@ -2957,7 +2980,7 @@
* We aren't required to halt the OUT endpoint; instead
* we can simply accept and discard any data received
* until the next reset. */
- halt_bulk_in_endpoint(fsg);
+ wedge_bulk_in_endpoint(fsg);
set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
return -EINVAL;
}
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
new file mode 100644
index 0000000..75eba20
--- /dev/null
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -0,0 +1,2404 @@
+/*
+ * Handles the Intel 27x USB Device Controller (UDC)
+ *
+ * Inspired by original driver by Frank Becker, David Brownell, and others.
+ * Copyright (C) 2008 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+
+#include <asm/byteorder.h>
+#include <asm/hardware.h>
+
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include <asm/arch/udc.h>
+
+#include "pxa27x_udc.h"
+
+/*
+ * This driver handles the USB Device Controller (UDC) in Intel's PXA 27x
+ * series processors.
+ *
+ * Such controller drivers work with a gadget driver. The gadget driver
+ * returns descriptors, implements configuration and data protocols used
+ * by the host to interact with this device, and allocates endpoints to
+ * the different protocol interfaces. The controller driver virtualizes
+ * usb hardware so that the gadget drivers will be more portable.
+ *
+ * This UDC hardware wants to implement a bit too much USB protocol. The
+ * biggest issues are: that the endpoints have to be set up before the
+ * controller can be enabled (minor, and not uncommon); and each endpoint
+ * can only have one configuration, interface and alternative interface
+ * number (major, and very unusual). Once set up, these cannot be changed
+ * without a controller reset.
+ *
+ * The workaround is to setup all combinations necessary for the gadgets which
+ * will work with this driver. This is done in pxa_udc structure, statically.
+ * See pxa_udc, udc_usb_ep versus pxa_ep, and matching function find_pxa_ep.
+ * (You could modify this if needed. Some drivers have a "fifo_mode" module
+ * parameter to facilitate such changes.)
+ *
+ * The combinations have been tested with these gadgets :
+ * - zero gadget
+ * - file storage gadget
+ * - ether gadget
+ *
+ * The driver doesn't use DMA, only IO access and IRQ callbacks. No use is
+ * made of UDC's double buffering either. USB "On-The-Go" is not implemented.
+ *
+ * All the requests are handled the same way :
+ * - the drivers tries to handle the request directly to the IO
+ * - if the IO fifo is not big enough, the remaining is send/received in
+ * interrupt handling.
+ */
+
+#define DRIVER_VERSION "2008-04-18"
+#define DRIVER_DESC "PXA 27x USB Device Controller driver"
+
+static const char driver_name[] = "pxa27x_udc";
+static struct pxa_udc *the_controller;
+
+static void handle_ep(struct pxa_ep *ep);
+
+/*
+ * Debug filesystem
+ */
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/seq_file.h>
+
+static int state_dbg_show(struct seq_file *s, void *p)
+{
+ struct pxa_udc *udc = s->private;
+ int pos = 0, ret;
+ u32 tmp;
+
+ ret = -ENODEV;
+ if (!udc->driver)
+ goto out;
+
+ /* basic device status */
+ pos += seq_printf(s, DRIVER_DESC "\n"
+ "%s version: %s\nGadget driver: %s\n",
+ driver_name, DRIVER_VERSION,
+ udc->driver ? udc->driver->driver.name : "(none)");
+
+ tmp = udc_readl(udc, UDCCR);
+ pos += seq_printf(s,
+ "udccr=0x%0x(%s%s%s%s%s%s%s%s%s%s), "
+ "con=%d,inter=%d,altinter=%d\n", tmp,
+ (tmp & UDCCR_OEN) ? " oen":"",
+ (tmp & UDCCR_AALTHNP) ? " aalthnp":"",
+ (tmp & UDCCR_AHNP) ? " rem" : "",
+ (tmp & UDCCR_BHNP) ? " rstir" : "",
+ (tmp & UDCCR_DWRE) ? " dwre" : "",
+ (tmp & UDCCR_SMAC) ? " smac" : "",
+ (tmp & UDCCR_EMCE) ? " emce" : "",
+ (tmp & UDCCR_UDR) ? " udr" : "",
+ (tmp & UDCCR_UDA) ? " uda" : "",
+ (tmp & UDCCR_UDE) ? " ude" : "",
+ (tmp & UDCCR_ACN) >> UDCCR_ACN_S,
+ (tmp & UDCCR_AIN) >> UDCCR_AIN_S,
+ (tmp & UDCCR_AAISN) >> UDCCR_AAISN_S);
+ /* registers for device and ep0 */
+ pos += seq_printf(s, "udcicr0=0x%08x udcicr1=0x%08x\n",
+ udc_readl(udc, UDCICR0), udc_readl(udc, UDCICR1));
+ pos += seq_printf(s, "udcisr0=0x%08x udcisr1=0x%08x\n",
+ udc_readl(udc, UDCISR0), udc_readl(udc, UDCISR1));
+ pos += seq_printf(s, "udcfnr=%d\n", udc_readl(udc, UDCFNR));
+ pos += seq_printf(s, "irqs: reset=%lu, suspend=%lu, resume=%lu, "
+ "reconfig=%lu\n",
+ udc->stats.irqs_reset, udc->stats.irqs_suspend,
+ udc->stats.irqs_resume, udc->stats.irqs_reconfig);
+
+ ret = 0;
+out:
+ return ret;
+}
+
+static int queues_dbg_show(struct seq_file *s, void *p)
+{
+ struct pxa_udc *udc = s->private;
+ struct pxa_ep *ep;
+ struct pxa27x_request *req;
+ int pos = 0, i, maxpkt, ret;
+
+ ret = -ENODEV;
+ if (!udc->driver)
+ goto out;
+
+ /* dump endpoint queues */
+ for (i = 0; i < NR_PXA_ENDPOINTS; i++) {
+ ep = &udc->pxa_ep[i];
+ maxpkt = ep->fifo_size;
+ pos += seq_printf(s, "%-12s max_pkt=%d %s\n",
+ EPNAME(ep), maxpkt, "pio");
+
+ if (list_empty(&ep->queue)) {
+ pos += seq_printf(s, "\t(nothing queued)\n");
+ continue;
+ }
+
+ list_for_each_entry(req, &ep->queue, queue) {
+ pos += seq_printf(s, "\treq %p len %d/%d buf %p\n",
+ &req->req, req->req.actual,
+ req->req.length, req->req.buf);
+ }
+ }
+
+ ret = 0;
+out:
+ return ret;
+}
+
+static int eps_dbg_show(struct seq_file *s, void *p)
+{
+ struct pxa_udc *udc = s->private;
+ struct pxa_ep *ep;
+ int pos = 0, i, ret;
+ u32 tmp;
+
+ ret = -ENODEV;
+ if (!udc->driver)
+ goto out;
+
+ ep = &udc->pxa_ep[0];
+ tmp = udc_ep_readl(ep, UDCCSR);
+ pos += seq_printf(s, "udccsr0=0x%03x(%s%s%s%s%s%s%s)\n", tmp,
+ (tmp & UDCCSR0_SA) ? " sa" : "",
+ (tmp & UDCCSR0_RNE) ? " rne" : "",
+ (tmp & UDCCSR0_FST) ? " fst" : "",
+ (tmp & UDCCSR0_SST) ? " sst" : "",
+ (tmp & UDCCSR0_DME) ? " dme" : "",
+ (tmp & UDCCSR0_IPR) ? " ipr" : "",
+ (tmp & UDCCSR0_OPC) ? " opc" : "");
+ for (i = 0; i < NR_PXA_ENDPOINTS; i++) {
+ ep = &udc->pxa_ep[i];
+ tmp = i? udc_ep_readl(ep, UDCCR) : udc_readl(udc, UDCCR);
+ pos += seq_printf(s, "%-12s: "
+ "IN %lu(%lu reqs), OUT %lu(%lu reqs), "
+ "irqs=%lu, udccr=0x%08x, udccsr=0x%03x, "
+ "udcbcr=%d\n",
+ EPNAME(ep),
+ ep->stats.in_bytes, ep->stats.in_ops,
+ ep->stats.out_bytes, ep->stats.out_ops,
+ ep->stats.irqs,
+ tmp, udc_ep_readl(ep, UDCCSR),
+ udc_ep_readl(ep, UDCBCR));
+ }
+
+ ret = 0;
+out:
+ return ret;
+}
+
+static int eps_dbg_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, eps_dbg_show, inode->i_private);
+}
+
+static int queues_dbg_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, queues_dbg_show, inode->i_private);
+}
+
+static int state_dbg_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, state_dbg_show, inode->i_private);
+}
+
+static const struct file_operations state_dbg_fops = {
+ .owner = THIS_MODULE,
+ .open = state_dbg_open,
+ .llseek = seq_lseek,
+ .read = seq_read,
+ .release = single_release,
+};
+
+static const struct file_operations queues_dbg_fops = {
+ .owner = THIS_MODULE,
+ .open = queues_dbg_open,
+ .llseek = seq_lseek,
+ .read = seq_read,
+ .release = single_release,
+};
+
+static const struct file_operations eps_dbg_fops = {
+ .owner = THIS_MODULE,
+ .open = eps_dbg_open,
+ .llseek = seq_lseek,
+ .read = seq_read,
+ .release = single_release,
+};
+
+static void pxa_init_debugfs(struct pxa_udc *udc)
+{
+ struct dentry *root, *state, *queues, *eps;
+
+ root = debugfs_create_dir(udc->gadget.name, NULL);
+ if (IS_ERR(root) || !root)
+ goto err_root;
+
+ state = debugfs_create_file("udcstate", 0400, root, udc,
+ &state_dbg_fops);
+ if (!state)
+ goto err_state;
+ queues = debugfs_create_file("queues", 0400, root, udc,
+ &queues_dbg_fops);
+ if (!queues)
+ goto err_queues;
+ eps = debugfs_create_file("epstate", 0400, root, udc,
+ &eps_dbg_fops);
+ if (!queues)
+ goto err_eps;
+
+ udc->debugfs_root = root;
+ udc->debugfs_state = state;
+ udc->debugfs_queues = queues;
+ udc->debugfs_eps = eps;
+ return;
+err_eps:
+ debugfs_remove(eps);
+err_queues:
+ debugfs_remove(queues);
+err_state:
+ debugfs_remove(root);
+err_root:
+ dev_err(udc->dev, "debugfs is not available\n");
+}
+
+static void pxa_cleanup_debugfs(struct pxa_udc *udc)
+{
+ debugfs_remove(udc->debugfs_eps);
+ debugfs_remove(udc->debugfs_queues);
+ debugfs_remove(udc->debugfs_state);
+ debugfs_remove(udc->debugfs_root);
+ udc->debugfs_eps = NULL;
+ udc->debugfs_queues = NULL;
+ udc->debugfs_state = NULL;
+ udc->debugfs_root = NULL;
+}
+
+#else
+static inline void pxa_init_debugfs(struct pxa_udc *udc)
+{
+}
+
+static inline void pxa_cleanup_debugfs(struct pxa_udc *udc)
+{
+}
+#endif
+
+/**
+ * is_match_usb_pxa - check if usb_ep and pxa_ep match
+ * @udc_usb_ep: usb endpoint
+ * @ep: pxa endpoint
+ * @config: configuration required in pxa_ep
+ * @interface: interface required in pxa_ep
+ * @altsetting: altsetting required in pxa_ep
+ *
+ * Returns 1 if all criteria match between pxa and usb endpoint, 0 otherwise
+ */
+static int is_match_usb_pxa(struct udc_usb_ep *udc_usb_ep, struct pxa_ep *ep,
+ int config, int interface, int altsetting)
+{
+ if (usb_endpoint_num(&udc_usb_ep->desc) != ep->addr)
+ return 0;
+ if (usb_endpoint_dir_in(&udc_usb_ep->desc) != ep->dir_in)
+ return 0;
+ if (usb_endpoint_type(&udc_usb_ep->desc) != ep->type)
+ return 0;
+ if ((ep->config != config) || (ep->interface != interface)
+ || (ep->alternate != altsetting))
+ return 0;
+ return 1;
+}
+
+/**
+ * find_pxa_ep - find pxa_ep structure matching udc_usb_ep
+ * @udc: pxa udc
+ * @udc_usb_ep: udc_usb_ep structure
+ *
+ * Match udc_usb_ep and all pxa_ep available, to see if one matches.
+ * This is necessary because of the strong pxa hardware restriction requiring
+ * that once pxa endpoints are initialized, their configuration is freezed, and
+ * no change can be made to their address, direction, or in which configuration,
+ * interface or altsetting they are active ... which differs from more usual
+ * models which have endpoints be roughly just addressable fifos, and leave
+ * configuration events up to gadget drivers (like all control messages).
+ *
+ * Note that there is still a blurred point here :
+ * - we rely on UDCCR register "active interface" and "active altsetting".
+ * This is a nonsense in regard of USB spec, where multiple interfaces are
+ * active at the same time.
+ * - if we knew for sure that the pxa can handle multiple interface at the
+ * same time, assuming Intel's Developer Guide is wrong, this function
+ * should be reviewed, and a cache of couples (iface, altsetting) should
+ * be kept in the pxa_udc structure. In this case this function would match
+ * against the cache of couples instead of the "last altsetting" set up.
+ *
+ * Returns the matched pxa_ep structure or NULL if none found
+ */
+static struct pxa_ep *find_pxa_ep(struct pxa_udc *udc,
+ struct udc_usb_ep *udc_usb_ep)
+{
+ int i;
+ struct pxa_ep *ep;
+ int cfg = udc->config;
+ int iface = udc->last_interface;
+ int alt = udc->last_alternate;
+
+ if (udc_usb_ep == &udc->udc_usb_ep[0])
+ return &udc->pxa_ep[0];
+
+ for (i = 1; i < NR_PXA_ENDPOINTS; i++) {
+ ep = &udc->pxa_ep[i];
+ if (is_match_usb_pxa(udc_usb_ep, ep, cfg, iface, alt))
+ return ep;
+ }
+ return NULL;
+}
+
+/**
+ * update_pxa_ep_matches - update pxa_ep cached values in all udc_usb_ep
+ * @udc: pxa udc
+ *
+ * Context: in_interrupt()
+ *
+ * Updates all pxa_ep fields in udc_usb_ep structures, if this field was
+ * previously set up (and is not NULL). The update is necessary is a
+ * configuration change or altsetting change was issued by the USB host.
+ */
+static void update_pxa_ep_matches(struct pxa_udc *udc)
+{
+ int i;
+ struct udc_usb_ep *udc_usb_ep;
+
+ for (i = 1; i < NR_USB_ENDPOINTS; i++) {
+ udc_usb_ep = &udc->udc_usb_ep[i];
+ if (udc_usb_ep->pxa_ep)
+ udc_usb_ep->pxa_ep = find_pxa_ep(udc, udc_usb_ep);
+ }
+}
+
+/**
+ * pio_irq_enable - Enables irq generation for one endpoint
+ * @ep: udc endpoint
+ */
+static void pio_irq_enable(struct pxa_ep *ep)
+{
+ struct pxa_udc *udc = ep->dev;
+ int index = EPIDX(ep);
+ u32 udcicr0 = udc_readl(udc, UDCICR0);
+ u32 udcicr1 = udc_readl(udc, UDCICR1);
+
+ if (index < 16)
+ udc_writel(udc, UDCICR0, udcicr0 | (3 << (index * 2)));
+ else
+ udc_writel(udc, UDCICR1, udcicr1 | (3 << ((index - 16) * 2)));
+}
+
+/**
+ * pio_irq_disable - Disables irq generation for one endpoint
+ * @ep: udc endpoint
+ * @index: endpoint number
+ */
+static void pio_irq_disable(struct pxa_ep *ep)
+{
+ struct pxa_udc *udc = ep->dev;
+ int index = EPIDX(ep);
+ u32 udcicr0 = udc_readl(udc, UDCICR0);
+ u32 udcicr1 = udc_readl(udc, UDCICR1);
+
+ if (index < 16)
+ udc_writel(udc, UDCICR0, udcicr0 & ~(3 << (index * 2)));
+ else
+ udc_writel(udc, UDCICR1, udcicr1 & ~(3 << ((index - 16) * 2)));
+}
+
+/**
+ * udc_set_mask_UDCCR - set bits in UDCCR
+ * @udc: udc device
+ * @mask: bits to set in UDCCR
+ *
+ * Sets bits in UDCCR, leaving DME and FST bits as they were.
+ */
+static inline void udc_set_mask_UDCCR(struct pxa_udc *udc, int mask)
+{
+ u32 udccr = udc_readl(udc, UDCCR);
+ udc_writel(udc, UDCCR,
+ (udccr & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS));
+}
+
+/**
+ * udc_clear_mask_UDCCR - clears bits in UDCCR
+ * @udc: udc device
+ * @mask: bit to clear in UDCCR
+ *
+ * Clears bits in UDCCR, leaving DME and FST bits as they were.
+ */
+static inline void udc_clear_mask_UDCCR(struct pxa_udc *udc, int mask)
+{
+ u32 udccr = udc_readl(udc, UDCCR);
+ udc_writel(udc, UDCCR,
+ (udccr & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS));
+}
+
+/**
+ * ep_count_bytes_remain - get how many bytes in udc endpoint
+ * @ep: udc endpoint
+ *
+ * Returns number of bytes in OUT fifos. Broken for IN fifos (-EOPNOTSUPP)
+ */
+static int ep_count_bytes_remain(struct pxa_ep *ep)
+{
+ if (ep->dir_in)
+ return -EOPNOTSUPP;
+ return udc_ep_readl(ep, UDCBCR) & 0x3ff;
+}
+
+/**
+ * ep_is_empty - checks if ep has byte ready for reading
+ * @ep: udc endpoint
+ *
+ * If endpoint is the control endpoint, checks if there are bytes in the
+ * control endpoint fifo. If endpoint is a data endpoint, checks if bytes
+ * are ready for reading on OUT endpoint.
+ *
+ * Returns 0 if ep not empty, 1 if ep empty, -EOPNOTSUPP if IN endpoint
+ */
+static int ep_is_empty(struct pxa_ep *ep)
+{
+ int ret;
+
+ if (!is_ep0(ep) && ep->dir_in)
+ return -EOPNOTSUPP;
+ if (is_ep0(ep))
+ ret = !(udc_ep_readl(ep, UDCCSR) & UDCCSR0_RNE);
+ else
+ ret = !(udc_ep_readl(ep, UDCCSR) & UDCCSR_BNE);
+ return ret;
+}
+
+/**
+ * ep_is_full - checks if ep has place to write bytes
+ * @ep: udc endpoint
+ *
+ * If endpoint is not the control endpoint and is an IN endpoint, checks if
+ * there is place to write bytes into the endpoint.
+ *
+ * Returns 0 if ep not full, 1 if ep full, -EOPNOTSUPP if OUT endpoint
+ */
+static int ep_is_full(struct pxa_ep *ep)
+{
+ if (is_ep0(ep))
+ return (udc_ep_readl(ep, UDCCSR) & UDCCSR0_IPR);
+ if (!ep->dir_in)
+ return -EOPNOTSUPP;
+ return (!(udc_ep_readl(ep, UDCCSR) & UDCCSR_BNF));
+}
+
+/**
+ * epout_has_pkt - checks if OUT endpoint fifo has a packet available
+ * @ep: pxa endpoint
+ *
+ * Returns 1 if a complete packet is available, 0 if not, -EOPNOTSUPP for IN ep.
+ */
+static int epout_has_pkt(struct pxa_ep *ep)
+{
+ if (!is_ep0(ep) && ep->dir_in)
+ return -EOPNOTSUPP;
+ if (is_ep0(ep))
+ return (udc_ep_readl(ep, UDCCSR) & UDCCSR0_OPC);
+ return (udc_ep_readl(ep, UDCCSR) & UDCCSR_PC);
+}
+
+/**
+ * set_ep0state - Set ep0 automata state
+ * @dev: udc device
+ * @state: state
+ */
+static void set_ep0state(struct pxa_udc *udc, int state)
+{
+ struct pxa_ep *ep = &udc->pxa_ep[0];
+ char *old_stname = EP0_STNAME(udc);
+
+ udc->ep0state = state;
+ ep_dbg(ep, "state=%s->%s, udccsr0=0x%03x, udcbcr=%d\n", old_stname,
+ EP0_STNAME(udc), udc_ep_readl(ep, UDCCSR),
+ udc_ep_readl(ep, UDCBCR));
+}
+
+/**
+ * ep0_idle - Put control endpoint into idle state
+ * @dev: udc device
+ */
+static void ep0_idle(struct pxa_udc *dev)
+{
+ set_ep0state(dev, WAIT_FOR_SETUP);
+}
+
+/**
+ * inc_ep_stats_reqs - Update ep stats counts
+ * @ep: physical endpoint
+ * @req: usb request
+ * @is_in: ep direction (USB_DIR_IN or 0)
+ *
+ */
+static void inc_ep_stats_reqs(struct pxa_ep *ep, int is_in)
+{
+ if (is_in)
+ ep->stats.in_ops++;
+ else
+ ep->stats.out_ops++;
+}
+
+/**
+ * inc_ep_stats_bytes - Update ep stats counts
+ * @ep: physical endpoint
+ * @count: bytes transfered on endpoint
+ * @req: usb request
+ * @is_in: ep direction (USB_DIR_IN or 0)
+ */
+static void inc_ep_stats_bytes(struct pxa_ep *ep, int count, int is_in)
+{
+ if (is_in)
+ ep->stats.in_bytes += count;
+ else
+ ep->stats.out_bytes += count;
+}
+
+/**
+ * pxa_ep_setup - Sets up an usb physical endpoint
+ * @ep: pxa27x physical endpoint
+ *
+ * Find the physical pxa27x ep, and setup its UDCCR
+ */
+static __init void pxa_ep_setup(struct pxa_ep *ep)
+{
+ u32 new_udccr;
+
+ new_udccr = ((ep->config << UDCCONR_CN_S) & UDCCONR_CN)
+ | ((ep->interface << UDCCONR_IN_S) & UDCCONR_IN)
+ | ((ep->alternate << UDCCONR_AISN_S) & UDCCONR_AISN)
+ | ((EPADDR(ep) << UDCCONR_EN_S) & UDCCONR_EN)
+ | ((EPXFERTYPE(ep) << UDCCONR_ET_S) & UDCCONR_ET)
+ | ((ep->dir_in) ? UDCCONR_ED : 0)
+ | ((ep->fifo_size << UDCCONR_MPS_S) & UDCCONR_MPS)
+ | UDCCONR_EE;
+
+ udc_ep_writel(ep, UDCCR, new_udccr);
+}
+
+/**
+ * pxa_eps_setup - Sets up all usb physical endpoints
+ * @dev: udc device
+ *
+ * Setup all pxa physical endpoints, except ep0
+ */
+static __init void pxa_eps_setup(struct pxa_udc *dev)
+{
+ unsigned int i;
+
+ dev_dbg(dev->dev, "%s: dev=%p\n", __func__, dev);
+
+ for (i = 1; i < NR_PXA_ENDPOINTS; i++)
+ pxa_ep_setup(&dev->pxa_ep[i]);
+}
+
+/**
+ * pxa_ep_alloc_request - Allocate usb request
+ * @_ep: usb endpoint
+ * @gfp_flags:
+ *
+ * For the pxa27x, these can just wrap kmalloc/kfree. gadget drivers
+ * must still pass correctly initialized endpoints, since other controller
+ * drivers may care about how it's currently set up (dma issues etc).
+ */
+static struct usb_request *
+pxa_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+ struct pxa27x_request *req;
+
+ req = kzalloc(sizeof *req, gfp_flags);
+ if (!req || !_ep)
+ return NULL;
+
+ INIT_LIST_HEAD(&req->queue);
+ req->in_use = 0;
+ req->udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+
+ return &req->req;
+}
+
+/**
+ * pxa_ep_free_request - Free usb request
+ * @_ep: usb endpoint
+ * @_req: usb request
+ *
+ * Wrapper around kfree to free _req
+ */
+static void pxa_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct pxa27x_request *req;
+
+ req = container_of(_req, struct pxa27x_request, req);
+ WARN_ON(!list_empty(&req->queue));
+ kfree(req);
+}
+
+/**
+ * ep_add_request - add a request to the endpoint's queue
+ * @ep: usb endpoint
+ * @req: usb request
+ *
+ * Context: ep->lock held
+ *
+ * Queues the request in the endpoint's queue, and enables the interrupts
+ * on the endpoint.
+ */
+static void ep_add_request(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+ if (unlikely(!req))
+ return;
+ ep_vdbg(ep, "req:%p, lg=%d, udccsr=0x%03x\n", req,
+ req->req.length, udc_ep_readl(ep, UDCCSR));
+
+ req->in_use = 1;
+ list_add_tail(&req->queue, &ep->queue);
+ pio_irq_enable(ep);
+}
+
+/**
+ * ep_del_request - removes a request from the endpoint's queue
+ * @ep: usb endpoint
+ * @req: usb request
+ *
+ * Context: ep->lock held
+ *
+ * Unqueue the request from the endpoint's queue. If there are no more requests
+ * on the endpoint, and if it's not the control endpoint, interrupts are
+ * disabled on the endpoint.
+ */
+static void ep_del_request(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+ if (unlikely(!req))
+ return;
+ ep_vdbg(ep, "req:%p, lg=%d, udccsr=0x%03x\n", req,
+ req->req.length, udc_ep_readl(ep, UDCCSR));
+
+ list_del_init(&req->queue);
+ req->in_use = 0;
+ if (!is_ep0(ep) && list_empty(&ep->queue))
+ pio_irq_disable(ep);
+}
+
+/**
+ * req_done - Complete an usb request
+ * @ep: pxa physical endpoint
+ * @req: pxa request
+ * @status: usb request status sent to gadget API
+ *
+ * Context: ep->lock held
+ *
+ * Retire a pxa27x usb request. Endpoint must be locked.
+ */
+static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status)
+{
+ ep_del_request(ep, req);
+ if (likely(req->req.status == -EINPROGRESS))
+ req->req.status = status;
+ else
+ status = req->req.status;
+
+ if (status && status != -ESHUTDOWN)
+ ep_dbg(ep, "complete req %p stat %d len %u/%u\n",
+ &req->req, status,
+ req->req.actual, req->req.length);
+
+ req->req.complete(&req->udc_usb_ep->usb_ep, &req->req);
+}
+
+/**
+ * ep_end_out_req - Ends control endpoint in request
+ * @ep: physical endpoint
+ * @req: pxa request
+ *
+ * Context: ep->lock held
+ *
+ * Ends endpoint in request (completes usb request).
+ */
+static void ep_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+ inc_ep_stats_reqs(ep, !USB_DIR_IN);
+ req_done(ep, req, 0);
+}
+
+/**
+ * ep0_end_out_req - Ends control endpoint in request (ends data stage)
+ * @ep: physical endpoint
+ * @req: pxa request
+ *
+ * Context: ep->lock held
+ *
+ * Ends control endpoint in request (completes usb request), and puts
+ * control endpoint into idle state
+ */
+static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+ set_ep0state(ep->dev, OUT_STATUS_STAGE);
+ ep_end_out_req(ep, req);
+ ep0_idle(ep->dev);
+}
+
+/**
+ * ep_end_in_req - Ends endpoint out request
+ * @ep: physical endpoint
+ * @req: pxa request
+ *
+ * Context: ep->lock held
+ *
+ * Ends endpoint out request (completes usb request).
+ */
+static void ep_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+ inc_ep_stats_reqs(ep, USB_DIR_IN);
+ req_done(ep, req, 0);
+}
+
+/**
+ * ep0_end_in_req - Ends control endpoint out request (ends data stage)
+ * @ep: physical endpoint
+ * @req: pxa request
+ *
+ * Context: ep->lock held
+ *
+ * Ends control endpoint out request (completes usb request), and puts
+ * control endpoint into status state
+ */
+static void ep0_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+ struct pxa_udc *udc = ep->dev;
+
+ set_ep0state(udc, IN_STATUS_STAGE);
+ ep_end_in_req(ep, req);
+}
+
+/**
+ * nuke - Dequeue all requests
+ * @ep: pxa endpoint
+ * @status: usb request status
+ *
+ * Context: ep->lock held
+ *
+ * Dequeues all requests on an endpoint. As a side effect, interrupts will be
+ * disabled on that endpoint (because no more requests).
+ */
+static void nuke(struct pxa_ep *ep, int status)
+{
+ struct pxa27x_request *req;
+
+ while (!list_empty(&ep->queue)) {
+ req = list_entry(ep->queue.next, struct pxa27x_request, queue);
+ req_done(ep, req, status);
+ }
+}
+
+/**
+ * read_packet - transfer 1 packet from an OUT endpoint into request
+ * @ep: pxa physical endpoint
+ * @req: usb request
+ *
+ * Takes bytes from OUT endpoint and transfers them info the usb request.
+ * If there is less space in request than bytes received in OUT endpoint,
+ * bytes are left in the OUT endpoint.
+ *
+ * Returns how many bytes were actually transfered
+ */
+static int read_packet(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+ u32 *buf;
+ int bytes_ep, bufferspace, count, i;
+
+ bytes_ep = ep_count_bytes_remain(ep);
+ bufferspace = req->req.length - req->req.actual;
+
+ buf = (u32 *)(req->req.buf + req->req.actual);
+ prefetchw(buf);
+
+ if (likely(!ep_is_empty(ep)))
+ count = min(bytes_ep, bufferspace);
+ else /* zlp */
+ count = 0;
+
+ for (i = count; i > 0; i -= 4)
+ *buf++ = udc_ep_readl(ep, UDCDR);
+ req->req.actual += count;
+
+ udc_ep_writel(ep, UDCCSR, UDCCSR_PC);
+
+ return count;
+}
+
+/**
+ * write_packet - transfer 1 packet from request into an IN endpoint
+ * @ep: pxa physical endpoint
+ * @req: usb request
+ * @max: max bytes that fit into endpoint
+ *
+ * Takes bytes from usb request, and transfers them into the physical
+ * endpoint. If there are no bytes to transfer, doesn't write anything
+ * to physical endpoint.
+ *
+ * Returns how many bytes were actually transfered.
+ */
+static int write_packet(struct pxa_ep *ep, struct pxa27x_request *req,
+ unsigned int max)
+{
+ int length, count, remain, i;
+ u32 *buf;
+ u8 *buf_8;
+
+ buf = (u32 *)(req->req.buf + req->req.actual);
+ prefetch(buf);
+
+ length = min(req->req.length - req->req.actual, max);
+ req->req.actual += length;
+
+ remain = length & 0x3;
+ count = length & ~(0x3);
+ for (i = count; i > 0 ; i -= 4)
+ udc_ep_writel(ep, UDCDR, *buf++);
+
+ buf_8 = (u8 *)buf;
+ for (i = remain; i > 0; i--)
+ udc_ep_writeb(ep, UDCDR, *buf_8++);
+
+ ep_vdbg(ep, "length=%d+%d, udccsr=0x%03x\n", count, remain,
+ udc_ep_readl(ep, UDCCSR));
+
+ return length;
+}
+
+/**
+ * read_fifo - Transfer packets from OUT endpoint into usb request
+ * @ep: pxa physical endpoint
+ * @req: usb request
+ *
+ * Context: callable when in_interrupt()
+ *
+ * Unload as many packets as possible from the fifo we use for usb OUT
+ * transfers and put them into the request. Caller should have made sure
+ * there's at least one packet ready.
+ * Doesn't complete the request, that's the caller's job
+ *
+ * Returns 1 if the request completed, 0 otherwise
+ */
+static int read_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+ int count, is_short, completed = 0;
+
+ while (epout_has_pkt(ep)) {
+ count = read_packet(ep, req);
+ inc_ep_stats_bytes(ep, count, !USB_DIR_IN);
+
+ is_short = (count < ep->fifo_size);
+ ep_dbg(ep, "read udccsr:%03x, count:%d bytes%s req %p %d/%d\n",
+ udc_ep_readl(ep, UDCCSR), count, is_short ? "/S" : "",
+ &req->req, req->req.actual, req->req.length);
+
+ /* completion */
+ if (is_short || req->req.actual == req->req.length) {
+ completed = 1;
+ break;
+ }
+ /* finished that packet. the next one may be waiting... */
+ }
+ return completed;
+}
+
+/**
+ * write_fifo - transfer packets from usb request into an IN endpoint
+ * @ep: pxa physical endpoint
+ * @req: pxa usb request
+ *
+ * Write to an IN endpoint fifo, as many packets as possible.
+ * irqs will use this to write the rest later.
+ * caller guarantees at least one packet buffer is ready (or a zlp).
+ * Doesn't complete the request, that's the caller's job
+ *
+ * Returns 1 if request fully transfered, 0 if partial transfer
+ */
+static int write_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+ unsigned max;
+ int count, is_short, is_last = 0, completed = 0, totcount = 0;
+ u32 udccsr;
+
+ max = ep->fifo_size;
+ do {
+ is_short = 0;
+
+ udccsr = udc_ep_readl(ep, UDCCSR);
+ if (udccsr & UDCCSR_PC) {
+ ep_vdbg(ep, "Clearing Transmit Complete, udccsr=%x\n",
+ udccsr);
+ udc_ep_writel(ep, UDCCSR, UDCCSR_PC);
+ }
+ if (udccsr & UDCCSR_TRN) {
+ ep_vdbg(ep, "Clearing Underrun on, udccsr=%x\n",
+ udccsr);
+ udc_ep_writel(ep, UDCCSR, UDCCSR_TRN);
+ }
+
+ count = write_packet(ep, req, max);
+ inc_ep_stats_bytes(ep, count, USB_DIR_IN);
+ totcount += count;
+
+ /* last packet is usually short (or a zlp) */
+ if (unlikely(count < max)) {
+ is_last = 1;
+ is_short = 1;
+ } else {
+ if (likely(req->req.length > req->req.actual)
+ || req->req.zero)
+ is_last = 0;
+ else
+ is_last = 1;
+ /* interrupt/iso maxpacket may not fill the fifo */
+ is_short = unlikely(max < ep->fifo_size);
+ }
+
+ if (is_short)
+ udc_ep_writel(ep, UDCCSR, UDCCSR_SP);
+
+ /* requests complete when all IN data is in the FIFO */
+ if (is_last) {
+ completed = 1;
+ break;
+ }
+ } while (!ep_is_full(ep));
+
+ ep_dbg(ep, "wrote count:%d bytes%s%s, left:%d req=%p\n",
+ totcount, is_last ? "/L" : "", is_short ? "/S" : "",
+ req->req.length - req->req.actual, &req->req);
+
+ return completed;
+}
+
+/**
+ * read_ep0_fifo - Transfer packets from control endpoint into usb request
+ * @ep: control endpoint
+ * @req: pxa usb request
+ *
+ * Special ep0 version of the above read_fifo. Reads as many bytes from control
+ * endpoint as can be read, and stores them into usb request (limited by request
+ * maximum length).
+ *
+ * Returns 0 if usb request only partially filled, 1 if fully filled
+ */
+static int read_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+ int count, is_short, completed = 0;
+
+ while (epout_has_pkt(ep)) {
+ count = read_packet(ep, req);
+ udc_ep_writel(ep, UDCCSR, UDCCSR0_OPC);
+ inc_ep_stats_bytes(ep, count, !USB_DIR_IN);
+
+ is_short = (count < ep->fifo_size);
+ ep_dbg(ep, "read udccsr:%03x, count:%d bytes%s req %p %d/%d\n",
+ udc_ep_readl(ep, UDCCSR), count, is_short ? "/S" : "",
+ &req->req, req->req.actual, req->req.length);
+
+ if (is_short || req->req.actual >= req->req.length) {
+ completed = 1;
+ break;
+ }
+ }
+
+ return completed;
+}
+
+/**
+ * write_ep0_fifo - Send a request to control endpoint (ep0 in)
+ * @ep: control endpoint
+ * @req: request
+ *
+ * Context: callable when in_interrupt()
+ *
+ * Sends a request (or a part of the request) to the control endpoint (ep0 in).
+ * If the request doesn't fit, the remaining part will be sent from irq.
+ * The request is considered fully written only if either :
+ * - last write transfered all remaining bytes, but fifo was not fully filled
+ * - last write was a 0 length write
+ *
+ * Returns 1 if request fully written, 0 if request only partially sent
+ */
+static int write_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+ unsigned count;
+ int is_last, is_short;
+
+ count = write_packet(ep, req, EP0_FIFO_SIZE);
+ inc_ep_stats_bytes(ep, count, USB_DIR_IN);
+
+ is_short = (count < EP0_FIFO_SIZE);
+ is_last = ((count == 0) || (count < EP0_FIFO_SIZE));
+
+ /* Sends either a short packet or a 0 length packet */
+ if (unlikely(is_short))
+ udc_ep_writel(ep, UDCCSR, UDCCSR0_IPR);
+
+ ep_dbg(ep, "in %d bytes%s%s, %d left, req=%p, udccsr0=0x%03x\n",
+ count, is_short ? "/S" : "", is_last ? "/L" : "",
+ req->req.length - req->req.actual,
+ &req->req, udc_ep_readl(ep, UDCCSR));
+
+ return is_last;
+}
+
+/**
+ * pxa_ep_queue - Queue a request into an IN endpoint
+ * @_ep: usb endpoint
+ * @_req: usb request
+ * @gfp_flags: flags
+ *
+ * Context: normally called when !in_interrupt, but callable when in_interrupt()
+ * in the special case of ep0 setup :
+ * (irq->handle_ep0_ctrl_req->gadget_setup->pxa_ep_queue)
+ *
+ * Returns 0 if succedeed, error otherwise
+ */
+static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+ gfp_t gfp_flags)
+{
+ struct udc_usb_ep *udc_usb_ep;
+ struct pxa_ep *ep;
+ struct pxa27x_request *req;
+ struct pxa_udc *dev;
+ unsigned long flags;
+ int rc = 0;
+ int is_first_req;
+ unsigned length;
+
+ req = container_of(_req, struct pxa27x_request, req);
+ udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+
+ if (unlikely(!_req || !_req->complete || !_req->buf))
+ return -EINVAL;
+
+ if (unlikely(!_ep))
+ return -EINVAL;
+
+ dev = udc_usb_ep->dev;
+ ep = udc_usb_ep->pxa_ep;
+ if (unlikely(!ep))
+ return -EINVAL;
+
+ dev = ep->dev;
+ if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) {
+ ep_dbg(ep, "bogus device state\n");
+ return -ESHUTDOWN;
+ }
+
+ /* iso is always one packet per request, that's the only way
+ * we can report per-packet status. that also helps with dma.
+ */
+ if (unlikely(EPXFERTYPE_is_ISO(ep)
+ && req->req.length > ep->fifo_size))
+ return -EMSGSIZE;
+
+ spin_lock_irqsave(&ep->lock, flags);
+
+ is_first_req = list_empty(&ep->queue);
+ ep_dbg(ep, "queue req %p(first=%s), len %d buf %p\n",
+ _req, is_first_req ? "yes" : "no",
+ _req->length, _req->buf);
+
+ if (!ep->enabled) {
+ _req->status = -ESHUTDOWN;
+ rc = -ESHUTDOWN;
+ goto out;
+ }
+
+ if (req->in_use) {
+ ep_err(ep, "refusing to queue req %p (already queued)\n", req);
+ goto out;
+ }
+
+ length = _req->length;
+ _req->status = -EINPROGRESS;
+ _req->actual = 0;
+
+ ep_add_request(ep, req);
+
+ if (is_ep0(ep)) {
+ switch (dev->ep0state) {
+ case WAIT_ACK_SET_CONF_INTERF:
+ if (length == 0) {
+ ep_end_in_req(ep, req);
+ } else {
+ ep_err(ep, "got a request of %d bytes while"
+ "in state WATI_ACK_SET_CONF_INTERF\n",
+ length);
+ ep_del_request(ep, req);
+ rc = -EL2HLT;
+ }
+ ep0_idle(ep->dev);
+ break;
+ case IN_DATA_STAGE:
+ if (!ep_is_full(ep))
+ if (write_ep0_fifo(ep, req))
+ ep0_end_in_req(ep, req);
+ break;
+ case OUT_DATA_STAGE:
+ if ((length == 0) || !epout_has_pkt(ep))
+ if (read_ep0_fifo(ep, req))
+ ep0_end_out_req(ep, req);
+ break;
+ default:
+ ep_err(ep, "odd state %s to send me a request\n",
+ EP0_STNAME(ep->dev));
+ ep_del_request(ep, req);
+ rc = -EL2HLT;
+ break;
+ }
+ } else {
+ handle_ep(ep);
+ }
+
+out:
+ spin_unlock_irqrestore(&ep->lock, flags);
+ return rc;
+}
+
+/**
+ * pxa_ep_dequeue - Dequeue one request
+ * @_ep: usb endpoint
+ * @_req: usb request
+ *
+ * Return 0 if no error, -EINVAL or -ECONNRESET otherwise
+ */
+static int pxa_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct pxa_ep *ep;
+ struct udc_usb_ep *udc_usb_ep;
+ struct pxa27x_request *req;
+ unsigned long flags;
+ int rc;
+
+ if (!_ep)
+ return -EINVAL;
+ udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+ ep = udc_usb_ep->pxa_ep;
+ if (!ep || is_ep0(ep))
+ return -EINVAL;
+
+ spin_lock_irqsave(&ep->lock, flags);
+
+ /* make sure it's actually queued on this endpoint */
+ list_for_each_entry(req, &ep->queue, queue) {
+ if (&req->req == _req)
+ break;
+ }
+
+ rc = -EINVAL;
+ if (&req->req != _req)
+ goto out;
+
+ rc = 0;
+ req_done(ep, req, -ECONNRESET);
+out:
+ spin_unlock_irqrestore(&ep->lock, flags);
+ return rc;
+}
+
+/**
+ * pxa_ep_set_halt - Halts operations on one endpoint
+ * @_ep: usb endpoint
+ * @value:
+ *
+ * Returns 0 if no error, -EINVAL, -EROFS, -EAGAIN otherwise
+ */
+static int pxa_ep_set_halt(struct usb_ep *_ep, int value)
+{
+ struct pxa_ep *ep;
+ struct udc_usb_ep *udc_usb_ep;
+ unsigned long flags;
+ int rc;
+
+
+ if (!_ep)
+ return -EINVAL;
+ udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+ ep = udc_usb_ep->pxa_ep;
+ if (!ep || is_ep0(ep))
+ return -EINVAL;
+
+ if (value == 0) {
+ /*
+ * This path (reset toggle+halt) is needed to implement
+ * SET_INTERFACE on normal hardware. but it can't be
+ * done from software on the PXA UDC, and the hardware
+ * forgets to do it as part of SET_INTERFACE automagic.
+ */
+ ep_dbg(ep, "only host can clear halt\n");
+ return -EROFS;
+ }
+
+ spin_lock_irqsave(&ep->lock, flags);
+
+ rc = -EAGAIN;
+ if (ep->dir_in && (ep_is_full(ep) || !list_empty(&ep->queue)))
+ goto out;
+
+ /* FST, FEF bits are the same for control and non control endpoints */
+ rc = 0;
+ udc_ep_writel(ep, UDCCSR, UDCCSR_FST | UDCCSR_FEF);
+ if (is_ep0(ep))
+ set_ep0state(ep->dev, STALL);
+
+out:
+ spin_unlock_irqrestore(&ep->lock, flags);
+ return rc;
+}
+
+/**
+ * pxa_ep_fifo_status - Get how many bytes in physical endpoint
+ * @_ep: usb endpoint
+ *
+ * Returns number of bytes in OUT fifos. Broken for IN fifos.
+ */
+static int pxa_ep_fifo_status(struct usb_ep *_ep)
+{
+ struct pxa_ep *ep;
+ struct udc_usb_ep *udc_usb_ep;
+
+ if (!_ep)
+ return -ENODEV;
+ udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+ ep = udc_usb_ep->pxa_ep;
+ if (!ep || is_ep0(ep))
+ return -ENODEV;
+
+ if (ep->dir_in)
+ return -EOPNOTSUPP;
+ if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN || ep_is_empty(ep))
+ return 0;
+ else
+ return ep_count_bytes_remain(ep) + 1;
+}
+
+/**
+ * pxa_ep_fifo_flush - Flushes one endpoint
+ * @_ep: usb endpoint
+ *
+ * Discards all data in one endpoint(IN or OUT), except control endpoint.
+ */
+static void pxa_ep_fifo_flush(struct usb_ep *_ep)
+{
+ struct pxa_ep *ep;
+ struct udc_usb_ep *udc_usb_ep;
+ unsigned long flags;
+
+ if (!_ep)
+ return;
+ udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+ ep = udc_usb_ep->pxa_ep;
+ if (!ep || is_ep0(ep))
+ return;
+
+ spin_lock_irqsave(&ep->lock, flags);
+
+ if (unlikely(!list_empty(&ep->queue)))
+ ep_dbg(ep, "called while queue list not empty\n");
+ ep_dbg(ep, "called\n");
+
+ /* for OUT, just read and discard the FIFO contents. */
+ if (!ep->dir_in) {
+ while (!ep_is_empty(ep))
+ udc_ep_readl(ep, UDCDR);
+ } else {
+ /* most IN status is the same, but ISO can't stall */
+ udc_ep_writel(ep, UDCCSR,
+ UDCCSR_PC | UDCCSR_FEF | UDCCSR_TRN
+ | (EPXFERTYPE_is_ISO(ep) ? 0 : UDCCSR_SST));
+ }
+
+ spin_unlock_irqrestore(&ep->lock, flags);
+
+ return;
+}
+
+/**
+ * pxa_ep_enable - Enables usb endpoint
+ * @_ep: usb endpoint
+ * @desc: usb endpoint descriptor
+ *
+ * Nothing much to do here, as ep configuration is done once and for all
+ * before udc is enabled. After udc enable, no physical endpoint configuration
+ * can be changed.
+ * Function makes sanity checks and flushes the endpoint.
+ */
+static int pxa_ep_enable(struct usb_ep *_ep,
+ const struct usb_endpoint_descriptor *desc)
+{
+ struct pxa_ep *ep;
+ struct udc_usb_ep *udc_usb_ep;
+ struct pxa_udc *udc;
+
+ if (!_ep || !desc)
+ return -EINVAL;
+
+ udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+ if (udc_usb_ep->pxa_ep) {
+ ep = udc_usb_ep->pxa_ep;
+ ep_warn(ep, "usb_ep %s already enabled, doing nothing\n",
+ _ep->name);
+ } else {
+ ep = find_pxa_ep(udc_usb_ep->dev, udc_usb_ep);
+ }
+
+ if (!ep || is_ep0(ep)) {
+ dev_err(udc_usb_ep->dev->dev,
+ "unable to match pxa_ep for ep %s\n",
+ _ep->name);
+ return -EINVAL;
+ }
+
+ if ((desc->bDescriptorType != USB_DT_ENDPOINT)
+ || (ep->type != usb_endpoint_type(desc))) {
+ ep_err(ep, "type mismatch\n");
+ return -EINVAL;
+ }
+
+ if (ep->fifo_size < le16_to_cpu(desc->wMaxPacketSize)) {
+ ep_err(ep, "bad maxpacket\n");
+ return -ERANGE;
+ }
+
+ udc_usb_ep->pxa_ep = ep;
+ udc = ep->dev;
+
+ if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
+ ep_err(ep, "bogus device state\n");
+ return -ESHUTDOWN;
+ }
+
+ ep->enabled = 1;
+
+ /* flush fifo (mostly for OUT buffers) */
+ pxa_ep_fifo_flush(_ep);
+
+ ep_dbg(ep, "enabled\n");
+ return 0;
+}
+
+/**
+ * pxa_ep_disable - Disable usb endpoint
+ * @_ep: usb endpoint
+ *
+ * Same as for pxa_ep_enable, no physical endpoint configuration can be
+ * changed.
+ * Function flushes the endpoint and related requests.
+ */
+static int pxa_ep_disable(struct usb_ep *_ep)
+{
+ struct pxa_ep *ep;
+ struct udc_usb_ep *udc_usb_ep;
+ unsigned long flags;
+
+ if (!_ep)
+ return -EINVAL;
+
+ udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+ ep = udc_usb_ep->pxa_ep;
+ if (!ep || is_ep0(ep) || !list_empty(&ep->queue))
+ return -EINVAL;
+
+ spin_lock_irqsave(&ep->lock, flags);
+ ep->enabled = 0;
+ nuke(ep, -ESHUTDOWN);
+ spin_unlock_irqrestore(&ep->lock, flags);
+
+ pxa_ep_fifo_flush(_ep);
+ udc_usb_ep->pxa_ep = NULL;
+
+ ep_dbg(ep, "disabled\n");
+ return 0;
+}
+
+static struct usb_ep_ops pxa_ep_ops = {
+ .enable = pxa_ep_enable,
+ .disable = pxa_ep_disable,
+
+ .alloc_request = pxa_ep_alloc_request,
+ .free_request = pxa_ep_free_request,
+
+ .queue = pxa_ep_queue,
+ .dequeue = pxa_ep_dequeue,
+
+ .set_halt = pxa_ep_set_halt,
+ .fifo_status = pxa_ep_fifo_status,
+ .fifo_flush = pxa_ep_fifo_flush,
+};
+
+
+/**
+ * pxa_udc_get_frame - Returns usb frame number
+ * @_gadget: usb gadget
+ */
+static int pxa_udc_get_frame(struct usb_gadget *_gadget)
+{
+ struct pxa_udc *udc = to_gadget_udc(_gadget);
+
+ return (udc_readl(udc, UDCFNR) & 0x7ff);
+}
+
+/**
+ * pxa_udc_wakeup - Force udc device out of suspend
+ * @_gadget: usb gadget
+ *
+ * Returns 0 if succesfull, error code otherwise
+ */
+static int pxa_udc_wakeup(struct usb_gadget *_gadget)
+{
+ struct pxa_udc *udc = to_gadget_udc(_gadget);
+
+ /* host may not have enabled remote wakeup */
+ if ((udc_readl(udc, UDCCR) & UDCCR_DWRE) == 0)
+ return -EHOSTUNREACH;
+ udc_set_mask_UDCCR(udc, UDCCR_UDR);
+ return 0;
+}
+
+static const struct usb_gadget_ops pxa_udc_ops = {
+ .get_frame = pxa_udc_get_frame,
+ .wakeup = pxa_udc_wakeup,
+ /* current versions must always be self-powered */
+};
+
+/**
+ * udc_disable - disable udc device controller
+ * @udc: udc device
+ *
+ * Disables the udc device : disables clocks, udc interrupts, control endpoint
+ * interrupts.
+ */
+static void udc_disable(struct pxa_udc *udc)
+{
+ udc_writel(udc, UDCICR0, 0);
+ udc_writel(udc, UDCICR1, 0);
+
+ udc_clear_mask_UDCCR(udc, UDCCR_UDE);
+ clk_disable(udc->clk);
+
+ ep0_idle(udc);
+ udc->gadget.speed = USB_SPEED_UNKNOWN;
+ udc->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
+}
+
+/**
+ * udc_init_data - Initialize udc device data structures
+ * @dev: udc device
+ *
+ * Initializes gadget endpoint list, endpoints locks. No action is taken
+ * on the hardware.
+ */
+static __init void udc_init_data(struct pxa_udc *dev)
+{
+ int i;
+ struct pxa_ep *ep;
+
+ /* device/ep0 records init */
+ INIT_LIST_HEAD(&dev->gadget.ep_list);
+ INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
+ dev->udc_usb_ep[0].pxa_ep = &dev->pxa_ep[0];
+ ep0_idle(dev);
+ strcpy(dev->dev->bus_id, "");
+
+ /* PXA endpoints init */
+ for (i = 0; i < NR_PXA_ENDPOINTS; i++) {
+ ep = &dev->pxa_ep[i];
+
+ ep->enabled = is_ep0(ep);
+ INIT_LIST_HEAD(&ep->queue);
+ spin_lock_init(&ep->lock);
+ }
+
+ /* USB endpoints init */
+ for (i = 0; i < NR_USB_ENDPOINTS; i++)
+ if (i != 0)
+ list_add_tail(&dev->udc_usb_ep[i].usb_ep.ep_list,
+ &dev->gadget.ep_list);
+}
+
+/**
+ * udc_enable - Enables the udc device
+ * @dev: udc device
+ *
+ * Enables the udc device : enables clocks, udc interrupts, control endpoint
+ * interrupts, sets usb as UDC client and setups endpoints.
+ */
+static void udc_enable(struct pxa_udc *udc)
+{
+ udc_writel(udc, UDCICR0, 0);
+ udc_writel(udc, UDCICR1, 0);
+ udc_writel(udc, UP2OCR, UP2OCR_HXOE);
+ udc_clear_mask_UDCCR(udc, UDCCR_UDE);
+
+ clk_enable(udc->clk);
+
+ ep0_idle(udc);
+ udc->gadget.speed = USB_SPEED_FULL;
+ memset(&udc->stats, 0, sizeof(udc->stats));
+
+ udc_set_mask_UDCCR(udc, UDCCR_UDE);
+ udelay(2);
+ if (udc_readl(udc, UDCCR) & UDCCR_EMCE)
+ dev_err(udc->dev, "Configuration errors, udc disabled\n");
+
+ /*
+ * Caller must be able to sleep in order to cope with startup transients
+ */
+ msleep(100);
+
+ /* enable suspend/resume and reset irqs */
+ udc_writel(udc, UDCICR1,
+ UDCICR1_IECC | UDCICR1_IERU
+ | UDCICR1_IESU | UDCICR1_IERS);
+
+ /* enable ep0 irqs */
+ pio_irq_enable(&udc->pxa_ep[0]);
+
+ dev_info(udc->dev, "UDC connecting\n");
+ if (udc->mach->udc_command)
+ udc->mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
+}
+
+/**
+ * usb_gadget_register_driver - Register gadget driver
+ * @driver: gadget driver
+ *
+ * When a driver is successfully registered, it will receive control requests
+ * including set_configuration(), which enables non-control requests. Then
+ * usb traffic follows until a disconnect is reported. Then a host may connect
+ * again, or the driver might get unbound.
+ *
+ * Returns 0 if no error, -EINVAL, -ENODEV, -EBUSY otherwise
+ */
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+ struct pxa_udc *udc = the_controller;
+ int retval;
+
+ if (!driver || driver->speed != USB_SPEED_FULL || !driver->bind
+ || !driver->disconnect || !driver->setup)
+ return -EINVAL;
+ if (!udc)
+ return -ENODEV;
+ if (udc->driver)
+ return -EBUSY;
+
+ /* first hook up the driver ... */
+ udc->driver = driver;
+ udc->gadget.dev.driver = &driver->driver;
+
+ retval = device_add(&udc->gadget.dev);
+ if (retval) {
+ dev_err(udc->dev, "device_add error %d\n", retval);
+ goto add_fail;
+ }
+ retval = driver->bind(&udc->gadget);
+ if (retval) {
+ dev_err(udc->dev, "bind to driver %s --> error %d\n",
+ driver->driver.name, retval);
+ goto bind_fail;
+ }
+ dev_dbg(udc->dev, "registered gadget driver '%s'\n",
+ driver->driver.name);
+
+ udc_enable(udc);
+ return 0;
+
+bind_fail:
+ device_del(&udc->gadget.dev);
+add_fail:
+ udc->driver = NULL;
+ udc->gadget.dev.driver = NULL;
+ return retval;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+
+/**
+ * stop_activity - Stops udc endpoints
+ * @udc: udc device
+ * @driver: gadget driver
+ *
+ * Disables all udc endpoints (even control endpoint), report disconnect to
+ * the gadget user.
+ */
+static void stop_activity(struct pxa_udc *udc, struct usb_gadget_driver *driver)
+{
+ int i;
+
+ /* don't disconnect drivers more than once */
+ if (udc->gadget.speed == USB_SPEED_UNKNOWN)
+ driver = NULL;
+ udc->gadget.speed = USB_SPEED_UNKNOWN;
+
+ for (i = 0; i < NR_USB_ENDPOINTS; i++)
+ pxa_ep_disable(&udc->udc_usb_ep[i].usb_ep);
+
+ if (driver)
+ driver->disconnect(&udc->gadget);
+}
+
+/**
+ * usb_gadget_unregister_driver - Unregister the gadget driver
+ * @driver: gadget driver
+ *
+ * Returns 0 if no error, -ENODEV, -EINVAL otherwise
+ */
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+ struct pxa_udc *udc = the_controller;
+
+ if (!udc)
+ return -ENODEV;
+ if (!driver || driver != udc->driver || !driver->unbind)
+ return -EINVAL;
+
+ stop_activity(udc, driver);
+ udc_disable(udc);
+
+ driver->unbind(&udc->gadget);
+ udc->driver = NULL;
+
+ device_del(&udc->gadget.dev);
+
+ dev_info(udc->dev, "unregistered gadget driver '%s'\n",
+ driver->driver.name);
+ return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+/**
+ * handle_ep0_ctrl_req - handle control endpoint control request
+ * @udc: udc device
+ * @req: control request
+ */
+static void handle_ep0_ctrl_req(struct pxa_udc *udc,
+ struct pxa27x_request *req)
+{
+ struct pxa_ep *ep = &udc->pxa_ep[0];
+ union {
+ struct usb_ctrlrequest r;
+ u32 word[2];
+ } u;
+ int i;
+ int have_extrabytes = 0;
+
+ nuke(ep, -EPROTO);
+
+ /* read SETUP packet */
+ for (i = 0; i < 2; i++) {
+ if (unlikely(ep_is_empty(ep)))
+ goto stall;
+ u.word[i] = udc_ep_readl(ep, UDCDR);
+ }
+
+ have_extrabytes = !ep_is_empty(ep);
+ while (!ep_is_empty(ep)) {
+ i = udc_ep_readl(ep, UDCDR);
+ ep_err(ep, "wrong to have extra bytes for setup : 0x%08x\n", i);
+ }
+
+ le16_to_cpus(&u.r.wValue);
+ le16_to_cpus(&u.r.wIndex);
+ le16_to_cpus(&u.r.wLength);
+
+ ep_dbg(ep, "SETUP %02x.%02x v%04x i%04x l%04x\n",
+ u.r.bRequestType, u.r.bRequest,
+ u.r.wValue, u.r.wIndex, u.r.wLength);
+ if (unlikely(have_extrabytes))
+ goto stall;
+
+ if (u.r.bRequestType & USB_DIR_IN)
+ set_ep0state(udc, IN_DATA_STAGE);
+ else
+ set_ep0state(udc, OUT_DATA_STAGE);
+
+ /* Tell UDC to enter Data Stage */
+ udc_ep_writel(ep, UDCCSR, UDCCSR0_SA | UDCCSR0_OPC);
+
+ i = udc->driver->setup(&udc->gadget, &u.r);
+ if (i < 0)
+ goto stall;
+out:
+ return;
+stall:
+ ep_dbg(ep, "protocol STALL, udccsr0=%03x err %d\n",
+ udc_ep_readl(ep, UDCCSR), i);
+ udc_ep_writel(ep, UDCCSR, UDCCSR0_FST | UDCCSR0_FTF);
+ set_ep0state(udc, STALL);
+ goto out;
+}
+
+/**
+ * handle_ep0 - Handle control endpoint data transfers
+ * @udc: udc device
+ * @fifo_irq: 1 if triggered by fifo service type irq
+ * @opc_irq: 1 if triggered by output packet complete type irq
+ *
+ * Context : when in_interrupt() or with ep->lock held
+ *
+ * Tries to transfer all pending request data into the endpoint and/or
+ * transfer all pending data in the endpoint into usb requests.
+ * Handles states of ep0 automata.
+ *
+ * PXA27x hardware handles several standard usb control requests without
+ * driver notification. The requests fully handled by hardware are :
+ * SET_ADDRESS, SET_FEATURE, CLEAR_FEATURE, GET_CONFIGURATION, GET_INTERFACE,
+ * GET_STATUS
+ * The requests handled by hardware, but with irq notification are :
+ * SYNCH_FRAME, SET_CONFIGURATION, SET_INTERFACE
+ * The remaining standard requests really handled by handle_ep0 are :
+ * GET_DESCRIPTOR, SET_DESCRIPTOR, specific requests.
+ * Requests standardized outside of USB 2.0 chapter 9 are handled more
+ * uniformly, by gadget drivers.
+ *
+ * The control endpoint state machine is _not_ USB spec compliant, it's even
+ * hardly compliant with Intel PXA270 developers guide.
+ * The key points which inferred this state machine are :
+ * - on every setup token, bit UDCCSR0_SA is raised and held until cleared by
+ * software.
+ * - on every OUT packet received, UDCCSR0_OPC is raised and held until
+ * cleared by software.
+ * - clearing UDCCSR0_OPC always flushes ep0. If in setup stage, never do it
+ * before reading ep0.
+ * - irq can be called on a "packet complete" event (opc_irq=1), while
+ * UDCCSR0_OPC is not yet raised (delta can be as big as 100ms
+ * from experimentation).
+ * - as UDCCSR0_SA can be activated while in irq handling, and clearing
+ * UDCCSR0_OPC would flush the setup data, we almost never clear UDCCSR0_OPC
+ * => we never actually read the "status stage" packet of an IN data stage
+ * => this is not documented in Intel documentation
+ * - hardware as no idea of STATUS STAGE, it only handle SETUP STAGE and DATA
+ * STAGE. The driver add STATUS STAGE to send last zero length packet in
+ * OUT_STATUS_STAGE.
+ * - special attention was needed for IN_STATUS_STAGE. If a packet complete
+ * event is detected, we terminate the status stage without ackowledging the
+ * packet (not to risk to loose a potential SETUP packet)
+ */
+static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq)
+{
+ u32 udccsr0;
+ struct pxa_ep *ep = &udc->pxa_ep[0];
+ struct pxa27x_request *req = NULL;
+ int completed = 0;
+
+ udccsr0 = udc_ep_readl(ep, UDCCSR);
+ ep_dbg(ep, "state=%s, req=%p, udccsr0=0x%03x, udcbcr=%d, irq_msk=%x\n",
+ EP0_STNAME(udc), req, udccsr0, udc_ep_readl(ep, UDCBCR),
+ (fifo_irq << 1 | opc_irq));
+
+ if (!list_empty(&ep->queue))
+ req = list_entry(ep->queue.next, struct pxa27x_request, queue);
+
+ if (udccsr0 & UDCCSR0_SST) {
+ ep_dbg(ep, "clearing stall status\n");
+ nuke(ep, -EPIPE);
+ udc_ep_writel(ep, UDCCSR, UDCCSR0_SST);
+ ep0_idle(udc);
+ }
+
+ if (udccsr0 & UDCCSR0_SA) {
+ nuke(ep, 0);
+ set_ep0state(udc, SETUP_STAGE);
+ }
+
+ switch (udc->ep0state) {
+ case WAIT_FOR_SETUP:
+ /*
+ * Hardware bug : beware, we cannot clear OPC, since we would
+ * miss a potential OPC irq for a setup packet.
+ * So, we only do ... nothing, and hope for a next irq with
+ * UDCCSR0_SA set.
+ */
+ break;
+ case SETUP_STAGE:
+ udccsr0 &= UDCCSR0_CTRL_REQ_MASK;
+ if (likely(udccsr0 == UDCCSR0_CTRL_REQ_MASK))
+ handle_ep0_ctrl_req(udc, req);
+ break;
+ case IN_DATA_STAGE: /* GET_DESCRIPTOR */
+ if (epout_has_pkt(ep))
+ udc_ep_writel(ep, UDCCSR, UDCCSR0_OPC);
+ if (req && !ep_is_full(ep))
+ completed = write_ep0_fifo(ep, req);
+ if (completed)
+ ep0_end_in_req(ep, req);
+ break;
+ case OUT_DATA_STAGE: /* SET_DESCRIPTOR */
+ if (epout_has_pkt(ep) && req)
+ completed = read_ep0_fifo(ep, req);
+ if (completed)
+ ep0_end_out_req(ep, req);
+ break;
+ case STALL:
+ udc_ep_writel(ep, UDCCSR, UDCCSR0_FST);
+ break;
+ case IN_STATUS_STAGE:
+ /*
+ * Hardware bug : beware, we cannot clear OPC, since we would
+ * miss a potential PC irq for a setup packet.
+ * So, we only put the ep0 into WAIT_FOR_SETUP state.
+ */
+ if (opc_irq)
+ ep0_idle(udc);
+ break;
+ case OUT_STATUS_STAGE:
+ case WAIT_ACK_SET_CONF_INTERF:
+ ep_warn(ep, "should never get in %s state here!!!\n",
+ EP0_STNAME(ep->dev));
+ ep0_idle(udc);
+ break;
+ }
+}
+
+/**
+ * handle_ep - Handle endpoint data tranfers
+ * @ep: pxa physical endpoint
+ *
+ * Tries to transfer all pending request data into the endpoint and/or
+ * transfer all pending data in the endpoint into usb requests.
+ *
+ * Is always called when in_interrupt() or with ep->lock held.
+ */
+static void handle_ep(struct pxa_ep *ep)
+{
+ struct pxa27x_request *req;
+ int completed;
+ u32 udccsr;
+ int is_in = ep->dir_in;
+ int loop = 0;
+
+ do {
+ completed = 0;
+ udccsr = udc_ep_readl(ep, UDCCSR);
+ if (likely(!list_empty(&ep->queue)))
+ req = list_entry(ep->queue.next,
+ struct pxa27x_request, queue);
+ else
+ req = NULL;
+
+ ep_dbg(ep, "req:%p, udccsr 0x%03x loop=%d\n",
+ req, udccsr, loop++);
+
+ if (unlikely(udccsr & (UDCCSR_SST | UDCCSR_TRN)))
+ udc_ep_writel(ep, UDCCSR,
+ udccsr & (UDCCSR_SST | UDCCSR_TRN));
+ if (!req)
+ break;
+
+ if (unlikely(is_in)) {
+ if (likely(!ep_is_full(ep)))
+ completed = write_fifo(ep, req);
+ if (completed)
+ ep_end_in_req(ep, req);
+ } else {
+ if (likely(epout_has_pkt(ep)))
+ completed = read_fifo(ep, req);
+ if (completed)
+ ep_end_out_req(ep, req);
+ }
+ } while (completed);
+}
+
+/**
+ * pxa27x_change_configuration - Handle SET_CONF usb request notification
+ * @udc: udc device
+ * @config: usb configuration
+ *
+ * Post the request to upper level.
+ * Don't use any pxa specific harware configuration capabilities
+ */
+static void pxa27x_change_configuration(struct pxa_udc *udc, int config)
+{
+ struct usb_ctrlrequest req ;
+
+ dev_dbg(udc->dev, "config=%d\n", config);
+
+ udc->config = config;
+ udc->last_interface = 0;
+ udc->last_alternate = 0;
+
+ req.bRequestType = 0;
+ req.bRequest = USB_REQ_SET_CONFIGURATION;
+ req.wValue = config;
+ req.wIndex = 0;
+ req.wLength = 0;
+
+ set_ep0state(udc, WAIT_ACK_SET_CONF_INTERF);
+ udc->driver->setup(&udc->gadget, &req);
+}
+
+/**
+ * pxa27x_change_interface - Handle SET_INTERF usb request notification
+ * @udc: udc device
+ * @iface: interface number
+ * @alt: alternate setting number
+ *
+ * Post the request to upper level.
+ * Don't use any pxa specific harware configuration capabilities
+ */
+static void pxa27x_change_interface(struct pxa_udc *udc, int iface, int alt)
+{
+ struct usb_ctrlrequest req;
+
+ dev_dbg(udc->dev, "interface=%d, alternate setting=%d\n", iface, alt);
+
+ udc->last_interface = iface;
+ udc->last_alternate = alt;
+
+ req.bRequestType = USB_RECIP_INTERFACE;
+ req.bRequest = USB_REQ_SET_INTERFACE;
+ req.wValue = alt;
+ req.wIndex = iface;
+ req.wLength = 0;
+
+ set_ep0state(udc, WAIT_ACK_SET_CONF_INTERF);
+ udc->driver->setup(&udc->gadget, &req);
+}
+
+/*
+ * irq_handle_data - Handle data transfer
+ * @irq: irq IRQ number
+ * @udc: dev pxa_udc device structure
+ *
+ * Called from irq handler, transferts data to or from endpoint to queue
+ */
+static void irq_handle_data(int irq, struct pxa_udc *udc)
+{
+ int i;
+ struct pxa_ep *ep;
+ u32 udcisr0 = udc_readl(udc, UDCISR0) & UDCCISR0_EP_MASK;
+ u32 udcisr1 = udc_readl(udc, UDCISR1) & UDCCISR1_EP_MASK;
+
+ if (udcisr0 & UDCISR_INT_MASK) {
+ udc->pxa_ep[0].stats.irqs++;
+ udc_writel(udc, UDCISR0, UDCISR_INT(0, UDCISR_INT_MASK));
+ handle_ep0(udc, !!(udcisr0 & UDCICR_FIFOERR),
+ !!(udcisr0 & UDCICR_PKTCOMPL));
+ }
+
+ udcisr0 >>= 2;
+ for (i = 1; udcisr0 != 0 && i < 16; udcisr0 >>= 2, i++) {
+ if (!(udcisr0 & UDCISR_INT_MASK))
+ continue;
+
+ udc_writel(udc, UDCISR0, UDCISR_INT(i, UDCISR_INT_MASK));
+ ep = &udc->pxa_ep[i];
+ ep->stats.irqs++;
+ handle_ep(ep);
+ }
+
+ for (i = 16; udcisr1 != 0 && i < 24; udcisr1 >>= 2, i++) {
+ udc_writel(udc, UDCISR1, UDCISR_INT(i - 16, UDCISR_INT_MASK));
+ if (!(udcisr1 & UDCISR_INT_MASK))
+ continue;
+
+ ep = &udc->pxa_ep[i];
+ ep->stats.irqs++;
+ handle_ep(ep);
+ }
+
+}
+
+/**
+ * irq_udc_suspend - Handle IRQ "UDC Suspend"
+ * @udc: udc device
+ */
+static void irq_udc_suspend(struct pxa_udc *udc)
+{
+ udc_writel(udc, UDCISR1, UDCISR1_IRSU);
+ udc->stats.irqs_suspend++;
+
+ if (udc->gadget.speed != USB_SPEED_UNKNOWN
+ && udc->driver && udc->driver->suspend)
+ udc->driver->suspend(&udc->gadget);
+ ep0_idle(udc);
+}
+
+/**
+ * irq_udc_resume - Handle IRQ "UDC Resume"
+ * @udc: udc device
+ */
+static void irq_udc_resume(struct pxa_udc *udc)
+{
+ udc_writel(udc, UDCISR1, UDCISR1_IRRU);
+ udc->stats.irqs_resume++;
+
+ if (udc->gadget.speed != USB_SPEED_UNKNOWN
+ && udc->driver && udc->driver->resume)
+ udc->driver->resume(&udc->gadget);
+}
+
+/**
+ * irq_udc_reconfig - Handle IRQ "UDC Change Configuration"
+ * @udc: udc device
+ */
+static void irq_udc_reconfig(struct pxa_udc *udc)
+{
+ unsigned config, interface, alternate, config_change;
+ u32 udccr = udc_readl(udc, UDCCR);
+
+ udc_writel(udc, UDCISR1, UDCISR1_IRCC);
+ udc->stats.irqs_reconfig++;
+
+ config = (udccr & UDCCR_ACN) >> UDCCR_ACN_S;
+ config_change = (config != udc->config);
+ pxa27x_change_configuration(udc, config);
+
+ interface = (udccr & UDCCR_AIN) >> UDCCR_AIN_S;
+ alternate = (udccr & UDCCR_AAISN) >> UDCCR_AAISN_S;
+ pxa27x_change_interface(udc, interface, alternate);
+
+ if (config_change)
+ update_pxa_ep_matches(udc);
+ udc_set_mask_UDCCR(udc, UDCCR_SMAC);
+}
+
+/**
+ * irq_udc_reset - Handle IRQ "UDC Reset"
+ * @udc: udc device
+ */
+static void irq_udc_reset(struct pxa_udc *udc)
+{
+ u32 udccr = udc_readl(udc, UDCCR);
+ struct pxa_ep *ep = &udc->pxa_ep[0];
+
+ dev_info(udc->dev, "USB reset\n");
+ udc_writel(udc, UDCISR1, UDCISR1_IRRS);
+ udc->stats.irqs_reset++;
+
+ if ((udccr & UDCCR_UDA) == 0) {
+ dev_dbg(udc->dev, "USB reset start\n");
+ stop_activity(udc, udc->driver);
+ }
+ udc->gadget.speed = USB_SPEED_FULL;
+ memset(&udc->stats, 0, sizeof udc->stats);
+
+ nuke(ep, -EPROTO);
+ udc_ep_writel(ep, UDCCSR, UDCCSR0_FTF | UDCCSR0_OPC);
+ ep0_idle(udc);
+}
+
+/**
+ * pxa_udc_irq - Main irq handler
+ * @irq: irq number
+ * @_dev: udc device
+ *
+ * Handles all udc interrupts
+ */
+static irqreturn_t pxa_udc_irq(int irq, void *_dev)
+{
+ struct pxa_udc *udc = _dev;
+ u32 udcisr0 = udc_readl(udc, UDCISR0);
+ u32 udcisr1 = udc_readl(udc, UDCISR1);
+ u32 udccr = udc_readl(udc, UDCCR);
+ u32 udcisr1_spec;
+
+ dev_vdbg(udc->dev, "Interrupt, UDCISR0:0x%08x, UDCISR1:0x%08x, "
+ "UDCCR:0x%08x\n", udcisr0, udcisr1, udccr);
+
+ udcisr1_spec = udcisr1 & 0xf8000000;
+ if (unlikely(udcisr1_spec & UDCISR1_IRSU))
+ irq_udc_suspend(udc);
+ if (unlikely(udcisr1_spec & UDCISR1_IRRU))
+ irq_udc_resume(udc);
+ if (unlikely(udcisr1_spec & UDCISR1_IRCC))
+ irq_udc_reconfig(udc);
+ if (unlikely(udcisr1_spec & UDCISR1_IRRS))
+ irq_udc_reset(udc);
+
+ if ((udcisr0 & UDCCISR0_EP_MASK) | (udcisr1 & UDCCISR1_EP_MASK))
+ irq_handle_data(irq, udc);
+
+ return IRQ_HANDLED;
+}
+
+static struct pxa_udc memory = {
+ .gadget = {
+ .ops = &pxa_udc_ops,
+ .ep0 = &memory.udc_usb_ep[0].usb_ep,
+ .name = driver_name,
+ .dev = {
+ .bus_id = "gadget",
+ },
+ },
+
+ .udc_usb_ep = {
+ USB_EP_CTRL,
+ USB_EP_OUT_BULK(1),
+ USB_EP_IN_BULK(2),
+ USB_EP_IN_ISO(3),
+ USB_EP_OUT_ISO(4),
+ USB_EP_IN_INT(5),
+ },
+
+ .pxa_ep = {
+ PXA_EP_CTRL,
+ /* Endpoints for gadget zero */
+ PXA_EP_OUT_BULK(1, 1, 3, 0, 0),
+ PXA_EP_IN_BULK(2, 2, 3, 0, 0),
+ /* Endpoints for ether gadget, file storage gadget */
+ PXA_EP_OUT_BULK(3, 1, 1, 0, 0),
+ PXA_EP_IN_BULK(4, 2, 1, 0, 0),
+ PXA_EP_IN_ISO(5, 3, 1, 0, 0),
+ PXA_EP_OUT_ISO(6, 4, 1, 0, 0),
+ PXA_EP_IN_INT(7, 5, 1, 0, 0),
+ /* Endpoints for RNDIS, serial */
+ PXA_EP_OUT_BULK(8, 1, 2, 0, 0),
+ PXA_EP_IN_BULK(9, 2, 2, 0, 0),
+ PXA_EP_IN_INT(10, 5, 2, 0, 0),
+ /*
+ * All the following endpoints are only for completion. They
+ * won't never work, as multiple interfaces are really broken on
+ * the pxa.
+ */
+ PXA_EP_OUT_BULK(11, 1, 2, 1, 0),
+ PXA_EP_IN_BULK(12, 2, 2, 1, 0),
+ /* Endpoint for CDC Ether */
+ PXA_EP_OUT_BULK(13, 1, 1, 1, 1),
+ PXA_EP_IN_BULK(14, 2, 1, 1, 1),
+ }
+};
+
+/**
+ * pxa_udc_probe - probes the udc device
+ * @_dev: platform device
+ *
+ * Perform basic init : allocates udc clock, creates sysfs files, requests
+ * irq.
+ */
+static int __init pxa_udc_probe(struct platform_device *pdev)
+{
+ struct resource *regs;
+ struct pxa_udc *udc = &memory;
+ int retval;
+
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!regs)
+ return -ENXIO;
+ udc->irq = platform_get_irq(pdev, 0);
+ if (udc->irq < 0)
+ return udc->irq;
+
+ udc->dev = &pdev->dev;
+ udc->mach = pdev->dev.platform_data;
+
+ udc->clk = clk_get(&pdev->dev, "UDCCLK");
+ if (IS_ERR(udc->clk)) {
+ retval = PTR_ERR(udc->clk);
+ goto err_clk;
+ }
+
+ retval = -ENOMEM;
+ udc->regs = ioremap(regs->start, regs->end - regs->start + 1);
+ if (!udc->regs) {
+ dev_err(&pdev->dev, "Unable to map UDC I/O memory\n");
+ goto err_map;
+ }
+
+ device_initialize(&udc->gadget.dev);
+ udc->gadget.dev.parent = &pdev->dev;
+ udc->gadget.dev.dma_mask = NULL;
+
+ the_controller = udc;
+ platform_set_drvdata(pdev, udc);
+ udc_init_data(udc);
+ pxa_eps_setup(udc);
+
+ /* irq setup after old hardware state is cleaned up */
+ retval = request_irq(udc->irq, pxa_udc_irq,
+ IRQF_SHARED, driver_name, udc);
+ if (retval != 0) {
+ dev_err(udc->dev, "%s: can't get irq %i, err %d\n",
+ driver_name, IRQ_USB, retval);
+ goto err_irq;
+ }
+
+ pxa_init_debugfs(udc);
+ return 0;
+err_irq:
+ iounmap(udc->regs);
+err_map:
+ clk_put(udc->clk);
+ udc->clk = NULL;
+err_clk:
+ return retval;
+}
+
+/**
+ * pxa_udc_remove - removes the udc device driver
+ * @_dev: platform device
+ */
+static int __exit pxa_udc_remove(struct platform_device *_dev)
+{
+ struct pxa_udc *udc = platform_get_drvdata(_dev);
+
+ usb_gadget_unregister_driver(udc->driver);
+ free_irq(udc->irq, udc);
+ pxa_cleanup_debugfs(udc);
+
+ platform_set_drvdata(_dev, NULL);
+ the_controller = NULL;
+ clk_put(udc->clk);
+
+ return 0;
+}
+
+static void pxa_udc_shutdown(struct platform_device *_dev)
+{
+ struct pxa_udc *udc = platform_get_drvdata(_dev);
+
+ udc_disable(udc);
+}
+
+#ifdef CONFIG_PM
+/**
+ * pxa_udc_suspend - Suspend udc device
+ * @_dev: platform device
+ * @state: suspend state
+ *
+ * Suspends udc : saves configuration registers (UDCCR*), then disables the udc
+ * device.
+ */
+static int pxa_udc_suspend(struct platform_device *_dev, pm_message_t state)
+{
+ int i;
+ struct pxa_udc *udc = platform_get_drvdata(_dev);
+ struct pxa_ep *ep;
+
+ ep = &udc->pxa_ep[0];
+ udc->udccsr0 = udc_ep_readl(ep, UDCCSR);
+ for (i = 1; i < NR_PXA_ENDPOINTS; i++) {
+ ep = &udc->pxa_ep[i];
+ ep->udccsr_value = udc_ep_readl(ep, UDCCSR);
+ ep->udccr_value = udc_ep_readl(ep, UDCCR);
+ ep_dbg(ep, "udccsr:0x%03x, udccr:0x%x\n",
+ ep->udccsr_value, ep->udccr_value);
+ }
+
+ udc_disable(udc);
+
+ return 0;
+}
+
+/**
+ * pxa_udc_resume - Resume udc device
+ * @_dev: platform device
+ *
+ * Resumes udc : restores configuration registers (UDCCR*), then enables the udc
+ * device.
+ */
+static int pxa_udc_resume(struct platform_device *_dev)
+{
+ int i;
+ struct pxa_udc *udc = platform_get_drvdata(_dev);
+ struct pxa_ep *ep;
+
+ ep = &udc->pxa_ep[0];
+ udc_ep_writel(ep, UDCCSR, udc->udccsr0 & (UDCCSR0_FST | UDCCSR0_DME));
+ for (i = 1; i < NR_PXA_ENDPOINTS; i++) {
+ ep = &udc->pxa_ep[i];
+ udc_ep_writel(ep, UDCCSR, ep->udccsr_value);
+ udc_ep_writel(ep, UDCCR, ep->udccr_value);
+ ep_dbg(ep, "udccsr:0x%03x, udccr:0x%x\n",
+ ep->udccsr_value, ep->udccr_value);
+ }
+
+ udc_enable(udc);
+ /*
+ * We do not handle OTG yet.
+ *
+ * OTGPH bit is set when sleep mode is entered.
+ * it indicates that OTG pad is retaining its state.
+ * Upon exit from sleep mode and before clearing OTGPH,
+ * Software must configure the USB OTG pad, UDC, and UHC
+ * to the state they were in before entering sleep mode.
+ *
+ * Should be : PSSR |= PSSR_OTGPH;
+ */
+
+ return 0;
+}
+#endif
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:pxa2xx-udc");
+
+static struct platform_driver udc_driver = {
+ .driver = {
+ .name = "pxa2xx-udc",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(pxa_udc_remove),
+ .shutdown = pxa_udc_shutdown,
+#ifdef CONFIG_PM
+ .suspend = pxa_udc_suspend,
+ .resume = pxa_udc_resume
+#endif
+};
+
+static int __init udc_init(void)
+{
+ printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION);
+ return platform_driver_probe(&udc_driver, pxa_udc_probe);
+}
+module_init(udc_init);
+
+
+static void __exit udc_exit(void)
+{
+ platform_driver_unregister(&udc_driver);
+}
+module_exit(udc_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Robert Jarzmik");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
new file mode 100644
index 0000000..1d1b7936
--- /dev/null
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -0,0 +1,487 @@
+/*
+ * linux/drivers/usb/gadget/pxa27x_udc.h
+ * Intel PXA27x on-chip full speed USB device controller
+ *
+ * Inspired by original driver by Frank Becker, David Brownell, and others.
+ * Copyright (C) 2008 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_USB_GADGET_PXA27X_H
+#define __LINUX_USB_GADGET_PXA27X_H
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+
+/*
+ * Register definitions
+ */
+/* Offsets */
+#define UDCCR 0x0000 /* UDC Control Register */
+#define UDCICR0 0x0004 /* UDC Interrupt Control Register0 */
+#define UDCICR1 0x0008 /* UDC Interrupt Control Register1 */
+#define UDCISR0 0x000C /* UDC Interrupt Status Register 0 */
+#define UDCISR1 0x0010 /* UDC Interrupt Status Register 1 */
+#define UDCFNR 0x0014 /* UDC Frame Number Register */
+#define UDCOTGICR 0x0018 /* UDC On-The-Go interrupt control */
+#define UP2OCR 0x0020 /* USB Port 2 Output Control register */
+#define UP3OCR 0x0024 /* USB Port 3 Output Control register */
+#define UDCCSRn(x) (0x0100 + ((x)<<2)) /* UDC Control/Status register */
+#define UDCBCRn(x) (0x0200 + ((x)<<2)) /* UDC Byte Count Register */
+#define UDCDRn(x) (0x0300 + ((x)<<2)) /* UDC Data Register */
+#define UDCCRn(x) (0x0400 + ((x)<<2)) /* UDC Control Register */
+
+#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */
+#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation
+ Protocol Port Support */
+#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol
+ Support */
+#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol
+ Enable */
+#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */
+#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */
+#define UDCCR_ACN_S 11
+#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */
+#define UDCCR_AIN_S 8
+#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface
+ Setting Number */
+#define UDCCR_AAISN_S 5
+#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active
+ Configuration */
+#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration
+ Error */
+#define UDCCR_UDR (1 << 2) /* UDC Resume */
+#define UDCCR_UDA (1 << 1) /* UDC Active */
+#define UDCCR_UDE (1 << 0) /* UDC Enable */
+
+#define UDCICR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */
+#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */
+#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */
+#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */
+#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */
+#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */
+#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */
+#define UDCICR_INT_MASK (UDCICR_FIFOERR | UDCICR_PKTCOMPL)
+
+#define UDCISR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */
+#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */
+#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */
+#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */
+#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */
+#define UDCISR_INT_MASK (UDCICR_FIFOERR | UDCICR_PKTCOMPL)
+
+#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */
+#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt
+ Rising Edge Interrupt Enable */
+#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt
+ Falling Edge Interrupt Enable */
+#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge
+ Interrupt Enable */
+#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge
+ Interrupt Enable */
+#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising
+ Edge Interrupt Enable */
+#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling
+ Edge Interrupt Enable */
+#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge
+ Interrupt Enable */
+
+/* Host Port 2 field bits */
+#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */
+#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */
+ /* Transceiver enablers */
+#define UP2OCR_DPPDE (1 << 2) /* D+ Pull Down Enable */
+#define UP2OCR_DMPDE (1 << 3) /* D- Pull Down Enable */
+#define UP2OCR_DPPUE (1 << 4) /* D+ Pull Up Enable */
+#define UP2OCR_DMPUE (1 << 5) /* D- Pull Up Enable */
+#define UP2OCR_DPPUBE (1 << 6) /* D+ Pull Up Bypass Enable */
+#define UP2OCR_DMPUBE (1 << 7) /* D- Pull Up Bypass Enable */
+#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */
+#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */
+#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */
+#define UP2OCR_HXS (1 << 16) /* Transceiver Output Select */
+#define UP2OCR_HXOE (1 << 17) /* Transceiver Output Enable */
+#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */
+
+#define UDCCSR0_SA (1 << 7) /* Setup Active */
+#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */
+#define UDCCSR0_FST (1 << 5) /* Force Stall */
+#define UDCCSR0_SST (1 << 4) /* Sent Stall */
+#define UDCCSR0_DME (1 << 3) /* DMA Enable */
+#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */
+#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */
+#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */
+
+#define UDCCSR_DPE (1 << 9) /* Data Packet Error */
+#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */
+#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */
+#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */
+#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */
+#define UDCCSR_FST (1 << 5) /* Force STALL */
+#define UDCCSR_SST (1 << 4) /* Sent STALL */
+#define UDCCSR_DME (1 << 3) /* DMA Enable */
+#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */
+#define UDCCSR_PC (1 << 1) /* Packet Complete */
+#define UDCCSR_FS (1 << 0) /* FIFO needs service */
+
+#define UDCCONR_CN (0x03 << 25) /* Configuration Number */
+#define UDCCONR_CN_S 25
+#define UDCCONR_IN (0x07 << 22) /* Interface Number */
+#define UDCCONR_IN_S 22
+#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */
+#define UDCCONR_AISN_S 19
+#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */
+#define UDCCONR_EN_S 15
+#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */
+#define UDCCONR_ET_S 13
+#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */
+#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */
+#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */
+#define UDCCONR_ET_NU (0x00 << 13) /* Not used */
+#define UDCCONR_ED (1 << 12) /* Endpoint Direction */
+#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */
+#define UDCCONR_MPS_S 2
+#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */
+#define UDCCONR_EE (1 << 0) /* Endpoint Enable */
+
+#define UDCCR_MASK_BITS (UDCCR_OEN | UDCCR_SMAC | UDCCR_UDR | UDCCR_UDE)
+#define UDCCSR_WR_MASK (UDCCSR_DME | UDCCSR_FST)
+#define UDC_FNR_MASK (0x7ff)
+#define UDC_BCR_MASK (0x3ff)
+
+/*
+ * UDCCR = UDC Endpoint Configuration Registers
+ * UDCCSR = UDC Control/Status Register for this EP
+ * UDCBCR = UDC Byte Count Remaining (contents of OUT fifo)
+ * UDCDR = UDC Endpoint Data Register (the fifo)
+ */
+#define ofs_UDCCR(ep) (UDCCRn(ep->idx))
+#define ofs_UDCCSR(ep) (UDCCSRn(ep->idx))
+#define ofs_UDCBCR(ep) (UDCBCRn(ep->idx))
+#define ofs_UDCDR(ep) (UDCDRn(ep->idx))
+
+/* Register access macros */
+#define udc_ep_readl(ep, reg) \
+ __raw_readl((ep)->dev->regs + ofs_##reg(ep))
+#define udc_ep_writel(ep, reg, value) \
+ __raw_writel((value), ep->dev->regs + ofs_##reg(ep))
+#define udc_ep_readb(ep, reg) \
+ __raw_readb((ep)->dev->regs + ofs_##reg(ep))
+#define udc_ep_writeb(ep, reg, value) \
+ __raw_writeb((value), ep->dev->regs + ofs_##reg(ep))
+#define udc_readl(dev, reg) \
+ __raw_readl((dev)->regs + (reg))
+#define udc_writel(udc, reg, value) \
+ __raw_writel((value), (udc)->regs + (reg))
+
+#define UDCCSR_MASK (UDCCSR_FST | UDCCSR_DME)
+#define UDCCISR0_EP_MASK ~0
+#define UDCCISR1_EP_MASK 0xffff
+#define UDCCSR0_CTRL_REQ_MASK (UDCCSR0_OPC | UDCCSR0_SA | UDCCSR0_RNE)
+
+#define EPIDX(ep) (ep->idx)
+#define EPADDR(ep) (ep->addr)
+#define EPXFERTYPE(ep) (ep->type)
+#define EPNAME(ep) (ep->name)
+#define is_ep0(ep) (!ep->idx)
+#define EPXFERTYPE_is_ISO(ep) (EPXFERTYPE(ep) == USB_ENDPOINT_XFER_ISOC)
+
+/*
+ * Endpoint definitions
+ *
+ * Once enabled, pxa endpoint configuration is freezed, and cannot change
+ * unless a reset happens or the udc is disabled.
+ * Therefore, we must define all pxa potential endpoint definitions needed for
+ * all gadget and set them up before the udc is enabled.
+ *
+ * As the architecture chosen is fully static, meaning the pxa endpoint
+ * configurations are set up once and for all, we must provide a way to match
+ * one usb endpoint (usb_ep) to several pxa endpoints. The reason is that gadget
+ * layer autoconf doesn't choose the usb_ep endpoint on (config, interface, alt)
+ * criteria, while the pxa architecture requires that.
+ *
+ * The solution is to define several pxa endpoints matching one usb_ep. Ex:
+ * - "ep1-in" matches pxa endpoint EPA (which is an IN ep at addr 1, when
+ * the udc talks on (config=3, interface=0, alt=0)
+ * - "ep1-in" matches pxa endpoint EPB (which is an IN ep at addr 1, when
+ * the udc talks on (config=3, interface=0, alt=1)
+ * - "ep1-in" matches pxa endpoint EPC (which is an IN ep at addr 1, when
+ * the udc talks on (config=2, interface=0, alt=0)
+ *
+ * We'll define the pxa endpoint by its index (EPA => idx=1, EPB => idx=2, ...)
+ */
+
+/*
+ * Endpoint definition helpers
+ */
+#define USB_EP_DEF(addr, bname, dir, type, maxpkt) \
+{ .usb_ep = { .name = bname, .ops = &pxa_ep_ops, .maxpacket = maxpkt, }, \
+ .desc = { .bEndpointAddress = addr | (dir ? USB_DIR_IN : 0), \
+ .bmAttributes = type, \
+ .wMaxPacketSize = maxpkt, }, \
+ .dev = &memory \
+}
+#define USB_EP_BULK(addr, bname, dir) \
+ USB_EP_DEF(addr, bname, dir, USB_ENDPOINT_XFER_BULK, BULK_FIFO_SIZE)
+#define USB_EP_ISO(addr, bname, dir) \
+ USB_EP_DEF(addr, bname, dir, USB_ENDPOINT_XFER_ISOC, ISO_FIFO_SIZE)
+#define USB_EP_INT(addr, bname, dir) \
+ USB_EP_DEF(addr, bname, dir, USB_ENDPOINT_XFER_INT, INT_FIFO_SIZE)
+#define USB_EP_IN_BULK(n) USB_EP_BULK(n, "ep" #n "in-bulk", 1)
+#define USB_EP_OUT_BULK(n) USB_EP_BULK(n, "ep" #n "out-bulk", 0)
+#define USB_EP_IN_ISO(n) USB_EP_ISO(n, "ep" #n "in-iso", 1)
+#define USB_EP_OUT_ISO(n) USB_EP_ISO(n, "ep" #n "out-iso", 0)
+#define USB_EP_IN_INT(n) USB_EP_INT(n, "ep" #n "in-int", 1)
+#define USB_EP_CTRL USB_EP_DEF(0, "ep0", 0, 0, EP0_FIFO_SIZE)
+
+#define PXA_EP_DEF(_idx, _addr, dir, _type, maxpkt, _config, iface, altset) \
+{ \
+ .dev = &memory, \
+ .name = "ep" #_idx, \
+ .idx = _idx, .enabled = 0, \
+ .dir_in = dir, .addr = _addr, \
+ .config = _config, .interface = iface, .alternate = altset, \
+ .type = _type, .fifo_size = maxpkt, \
+}
+#define PXA_EP_BULK(_idx, addr, dir, config, iface, alt) \
+ PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_BULK, BULK_FIFO_SIZE, \
+ config, iface, alt)
+#define PXA_EP_ISO(_idx, addr, dir, config, iface, alt) \
+ PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_ISOC, ISO_FIFO_SIZE, \
+ config, iface, alt)
+#define PXA_EP_INT(_idx, addr, dir, config, iface, alt) \
+ PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_INT, INT_FIFO_SIZE, \
+ config, iface, alt)
+#define PXA_EP_IN_BULK(i, adr, c, f, a) PXA_EP_BULK(i, adr, 1, c, f, a)
+#define PXA_EP_OUT_BULK(i, adr, c, f, a) PXA_EP_BULK(i, adr, 0, c, f, a)
+#define PXA_EP_IN_ISO(i, adr, c, f, a) PXA_EP_ISO(i, adr, 1, c, f, a)
+#define PXA_EP_OUT_ISO(i, adr, c, f, a) PXA_EP_ISO(i, adr, 0, c, f, a)
+#define PXA_EP_IN_INT(i, adr, c, f, a) PXA_EP_INT(i, adr, 1, c, f, a)
+#define PXA_EP_CTRL PXA_EP_DEF(0, 0, 0, 0, EP0_FIFO_SIZE, 0, 0, 0)
+
+struct pxa27x_udc;
+
+struct stats {
+ unsigned long in_ops;
+ unsigned long out_ops;
+ unsigned long in_bytes;
+ unsigned long out_bytes;
+ unsigned long irqs;
+};
+
+/**
+ * struct udc_usb_ep - container of each usb_ep structure
+ * @usb_ep: usb endpoint
+ * @desc: usb descriptor, especially type and address
+ * @dev: udc managing this endpoint
+ * @pxa_ep: matching pxa_ep (cache of find_pxa_ep() call)
+ */
+struct udc_usb_ep {
+ struct usb_ep usb_ep;
+ struct usb_endpoint_descriptor desc;
+ struct pxa_udc *dev;
+ struct pxa_ep *pxa_ep;
+};
+
+/**
+ * struct pxa_ep - pxa endpoint
+ * @dev: udc device
+ * @queue: requests queue
+ * @lock: lock to pxa_ep data (queues and stats)
+ * @enabled: true when endpoint enabled (not stopped by gadget layer)
+ * @idx: endpoint index (1 => epA, 2 => epB, ..., 24 => epX)
+ * @name: endpoint name (for trace/debug purpose)
+ * @dir_in: 1 if IN endpoint, 0 if OUT endpoint
+ * @addr: usb endpoint number
+ * @config: configuration in which this endpoint is active
+ * @interface: interface in which this endpoint is active
+ * @alternate: altsetting in which this endpoitn is active
+ * @fifo_size: max packet size in the endpoint fifo
+ * @type: endpoint type (bulk, iso, int, ...)
+ * @udccsr_value: save register of UDCCSR0 for suspend/resume
+ * @udccr_value: save register of UDCCR for suspend/resume
+ * @stats: endpoint statistics
+ *
+ * The *PROBLEM* is that pxa's endpoint configuration scheme is both misdesigned
+ * (cares about config/interface/altsetting, thus placing needless limits on
+ * device capability) and full of implementation bugs forcing it to be set up
+ * for use more or less like a pxa255.
+ *
+ * As we define the pxa_ep statically, we must guess all needed pxa_ep for all
+ * gadget which may work with this udc driver.
+ */
+struct pxa_ep {
+ struct pxa_udc *dev;
+
+ struct list_head queue;
+ spinlock_t lock; /* Protects this structure */
+ /* (queues, stats) */
+ unsigned enabled:1;
+
+ unsigned idx:5;
+ char *name;
+
+ /*
+ * Specific pxa endpoint data, needed for hardware initialization
+ */
+ unsigned dir_in:1;
+ unsigned addr:3;
+ unsigned config:2;
+ unsigned interface:3;
+ unsigned alternate:3;
+ unsigned fifo_size;
+ unsigned type;
+
+#ifdef CONFIG_PM
+ u32 udccsr_value;
+ u32 udccr_value;
+#endif
+ struct stats stats;
+};
+
+/**
+ * struct pxa27x_request - container of each usb_request structure
+ * @req: usb request
+ * @udc_usb_ep: usb endpoint the request was submitted on
+ * @in_use: sanity check if request already queued on an pxa_ep
+ * @queue: linked list of requests, linked on pxa_ep->queue
+ */
+struct pxa27x_request {
+ struct usb_request req;
+ struct udc_usb_ep *udc_usb_ep;
+ unsigned in_use:1;
+ struct list_head queue;
+};
+
+enum ep0_state {
+ WAIT_FOR_SETUP,
+ SETUP_STAGE,
+ IN_DATA_STAGE,
+ OUT_DATA_STAGE,
+ IN_STATUS_STAGE,
+ OUT_STATUS_STAGE,
+ STALL,
+ WAIT_ACK_SET_CONF_INTERF
+};
+
+static char *ep0_state_name[] = {
+ "WAIT_FOR_SETUP", "SETUP_STAGE", "IN_DATA_STAGE", "OUT_DATA_STAGE",
+ "IN_STATUS_STAGE", "OUT_STATUS_STAGE", "STALL",
+ "WAIT_ACK_SET_CONF_INTERF"
+};
+#define EP0_STNAME(udc) ep0_state_name[(udc)->ep0state]
+
+#define EP0_FIFO_SIZE 16U
+#define BULK_FIFO_SIZE 64U
+#define ISO_FIFO_SIZE 256U
+#define INT_FIFO_SIZE 16U
+
+struct udc_stats {
+ unsigned long irqs_reset;
+ unsigned long irqs_suspend;
+ unsigned long irqs_resume;
+ unsigned long irqs_reconfig;
+};
+
+#define NR_USB_ENDPOINTS (1 + 5) /* ep0 + ep1in-bulk + .. + ep3in-iso */
+#define NR_PXA_ENDPOINTS (1 + 14) /* ep0 + epA + epB + .. + epX */
+
+/**
+ * struct pxa_udc - udc structure
+ * @regs: mapped IO space
+ * @irq: udc irq
+ * @clk: udc clock
+ * @usb_gadget: udc gadget structure
+ * @driver: bound gadget (zero, g_ether, g_file_storage, ...)
+ * @dev: device
+ * @mach: machine info, used to activate specific GPIO
+ * @ep0state: control endpoint state machine state
+ * @stats: statistics on udc usage
+ * @udc_usb_ep: array of usb endpoints offered by the gadget
+ * @pxa_ep: array of pxa available endpoints
+ * @config: UDC active configuration
+ * @last_interface: UDC interface of the last SET_INTERFACE host request
+ * @last_alternate: UDC altsetting of the last SET_INTERFACE host request
+ * @udccsr0: save of udccsr0 in case of suspend
+ * @debugfs_root: root entry of debug filesystem
+ * @debugfs_state: debugfs entry for "udcstate"
+ * @debugfs_queues: debugfs entry for "queues"
+ * @debugfs_eps: debugfs entry for "epstate"
+ */
+struct pxa_udc {
+ void __iomem *regs;
+ int irq;
+ struct clk *clk;
+
+ struct usb_gadget gadget;
+ struct usb_gadget_driver *driver;
+ struct device *dev;
+ struct pxa2xx_udc_mach_info *mach;
+
+ enum ep0_state ep0state;
+ struct udc_stats stats;
+
+ struct udc_usb_ep udc_usb_ep[NR_USB_ENDPOINTS];
+ struct pxa_ep pxa_ep[NR_PXA_ENDPOINTS];
+
+ unsigned config:2;
+ unsigned last_interface:3;
+ unsigned last_alternate:3;
+
+#ifdef CONFIG_PM
+ unsigned udccsr0;
+#endif
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+ struct dentry *debugfs_root;
+ struct dentry *debugfs_state;
+ struct dentry *debugfs_queues;
+ struct dentry *debugfs_eps;
+#endif
+};
+
+static inline struct pxa_udc *to_gadget_udc(struct usb_gadget *gadget)
+{
+ return container_of(gadget, struct pxa_udc, gadget);
+}
+
+/*
+ * Debugging/message support
+ */
+#define ep_dbg(ep, fmt, arg...) \
+ dev_dbg(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg)
+#define ep_vdbg(ep, fmt, arg...) \
+ dev_vdbg(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg)
+#define ep_err(ep, fmt, arg...) \
+ dev_err(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg)
+#define ep_info(ep, fmt, arg...) \
+ dev_info(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg)
+#define ep_warn(ep, fmt, arg...) \
+ dev_warn(ep->dev->dev, "%s:%s:" fmt, EPNAME(ep), __func__, ## arg)
+
+#endif /* __LINUX_USB_GADGET_PXA27X_H */
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 8d158e56..54cdd6f 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -135,7 +135,10 @@
int port_in_use; /* open/close in progress */
wait_queue_head_t port_write_wait;/* waiting to write */
struct gs_buf *port_write_buf;
- struct usb_cdc_line_coding port_line_coding;
+ struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */
+ u16 port_handshake_bits;
+#define RS232_RTS (1 << 1)
+#define RS232_DTE (1 << 0)
};
/* the device structure holds info for the USB device */
@@ -199,6 +202,8 @@
static int gs_setup_class(struct usb_gadget *gadget,
const struct usb_ctrlrequest *ctrl);
static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req);
+static void gs_setup_complete_set_line_coding(struct usb_ep *ep,
+ struct usb_request *req);
static void gs_disconnect(struct usb_gadget *gadget);
static int gs_set_config(struct gs_dev *dev, unsigned config);
static void gs_reset_config(struct gs_dev *dev);
@@ -406,7 +411,7 @@
.bLength = sizeof(gs_acm_descriptor),
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubType = USB_CDC_ACM_TYPE,
- .bmCapabilities = 0,
+ .bmCapabilities = (1 << 1),
};
static const struct usb_cdc_union_desc gs_union_desc = {
@@ -1502,6 +1507,8 @@
u16 wValue = le16_to_cpu(ctrl->wValue);
u16 wLength = le16_to_cpu(ctrl->wLength);
+ req->complete = gs_setup_complete;
+
switch (ctrl->bRequestType & USB_TYPE_MASK) {
case USB_TYPE_STANDARD:
ret = gs_setup_standard(gadget,ctrl);
@@ -1679,18 +1686,14 @@
switch (ctrl->bRequest) {
case USB_CDC_REQ_SET_LINE_CODING:
- /* FIXME Submit req to read the data; have its completion
- * handler copy that data to port->port_line_coding (iff
- * it's valid) and maybe pass it on. Until then, fail.
- */
- pr_warning("gs_setup: set_line_coding "
- "unuspported\n");
+ if (wLength != sizeof(struct usb_cdc_line_coding))
+ break;
+ ret = wLength;
+ req->complete = gs_setup_complete_set_line_coding;
break;
case USB_CDC_REQ_GET_LINE_CODING:
- port = dev->dev_port[0]; /* ACM only has one port */
- ret = min(wLength,
- (u16)sizeof(struct usb_cdc_line_coding));
+ ret = min_t(int, wLength, sizeof(struct usb_cdc_line_coding));
if (port) {
spin_lock(&port->port_lock);
memcpy(req->buf, &port->port_line_coding, ret);
@@ -1699,15 +1702,27 @@
break;
case USB_CDC_REQ_SET_CONTROL_LINE_STATE:
- /* FIXME Submit req to read the data; have its completion
- * handler use that to set the state (iff it's valid) and
- * maybe pass it on. Until then, fail.
- */
- pr_warning("gs_setup: set_control_line_state "
- "unuspported\n");
+ if (wLength != 0)
+ break;
+ ret = 0;
+ if (port) {
+ /* REVISIT: we currently just remember this data.
+ * If we change that, update whatever hardware needs
+ * updating.
+ */
+ spin_lock(&port->port_lock);
+ port->port_handshake_bits = wValue;
+ spin_unlock(&port->port_lock);
+ }
break;
default:
+ /* NOTE: strictly speaking, we should accept AT-commands
+ * using SEND_ENCPSULATED_COMMAND/GET_ENCAPSULATED_RESPONSE.
+ * But our call management descriptor says we don't handle
+ * call management, so we should be able to get by without
+ * handling those "required" commands (except by stalling).
+ */
pr_err("gs_setup: unknown class request, "
"type=%02x, request=%02x, value=%04x, "
"index=%04x, length=%d\n",
@@ -1719,6 +1734,42 @@
return ret;
}
+static void gs_setup_complete_set_line_coding(struct usb_ep *ep,
+ struct usb_request *req)
+{
+ struct gs_dev *dev = ep->driver_data;
+ struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */
+
+ switch (req->status) {
+ case 0:
+ /* normal completion */
+ if (req->actual != sizeof(port->port_line_coding))
+ usb_ep_set_halt(ep);
+ else if (port) {
+ struct usb_cdc_line_coding *value = req->buf;
+
+ /* REVISIT: we currently just remember this data.
+ * If we change that, (a) validate it first, then
+ * (b) update whatever hardware needs updating.
+ */
+ spin_lock(&port->port_lock);
+ port->port_line_coding = *value;
+ spin_unlock(&port->port_lock);
+ }
+ break;
+
+ case -ESHUTDOWN:
+ /* disconnect */
+ gs_free_req(ep, req);
+ break;
+
+ default:
+ /* unexpected */
+ break;
+ }
+ return;
+}
+
/*
* gs_setup_complete
*/
@@ -1906,6 +1957,11 @@
}
}
+ /* REVISIT the ACM mode should be able to actually *issue* some
+ * notifications, for at least serial state change events if
+ * not also for network connection; say so in bmCapabilities.
+ */
+
pr_info("gs_set_config: %s configured, %s speed %s config\n",
GS_LONG_NAME,
gadget->speed == USB_SPEED_HIGH ? "high" : "full",
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index d3d4f40..fce4924 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -23,9 +23,7 @@
/*
* Gadget Zero only needs two bulk endpoints, and is an example of how you
* can write a hardware-agnostic gadget driver running inside a USB device.
- *
- * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't
- * affect most of the driver.
+ * Some hardware details are visible, but don't affect most of the driver.
*
* Use it with the Linux host/master side "usbtest" driver to get a basic
* functional test of your device-side usb stack, or with "usb-skeleton".
@@ -37,6 +35,7 @@
* buflen=N default N=4096, buffer size used
* qlen=N default N=32, how many buffers in the loopback queue
* loopdefault default false, list loopback config first
+ * autoresume=N default N=0, seconds before triggering remote wakeup
*
* Many drivers will only have one configuration, letting them be much
* simpler if they also don't support high speed operation (like this
@@ -62,13 +61,13 @@
/*-------------------------------------------------------------------------*/
-#define DRIVER_VERSION "Lughnasadh, 2007"
+#define DRIVER_VERSION "Earth Day 2008"
-static const char shortname [] = "zero";
-static const char longname [] = "Gadget Zero";
+static const char shortname[] = "zero";
+static const char longname[] = "Gadget Zero";
-static const char source_sink [] = "source and sink data";
-static const char loopback [] = "loop input to output";
+static const char source_sink[] = "source and sink data";
+static const char loopback[] = "loop input to output";
/*-------------------------------------------------------------------------*/
@@ -120,16 +119,16 @@
static unsigned qlen = 32;
static unsigned pattern = 0;
-module_param (buflen, uint, S_IRUGO);
-module_param (qlen, uint, S_IRUGO);
-module_param (pattern, uint, S_IRUGO|S_IWUSR);
+module_param(buflen, uint, S_IRUGO);
+module_param(qlen, uint, S_IRUGO);
+module_param(pattern, uint, S_IRUGO|S_IWUSR);
/*
* if it's nonzero, autoresume says how many seconds to wait
* before trying to wake up the host after suspend.
*/
static unsigned autoresume = 0;
-module_param (autoresume, uint, 0);
+module_param(autoresume, uint, 0);
/*
* Normally the "loopback" configuration is second (index 1) so
@@ -138,8 +137,7 @@
* Or controllers (like superh) that only support one config.
*/
static int loopdefault = 0;
-
-module_param (loopdefault, bool, S_IRUGO|S_IWUSR);
+module_param(loopdefault, bool, S_IRUGO|S_IWUSR);
/*-------------------------------------------------------------------------*/
@@ -176,24 +174,22 @@
#define CONFIG_SOURCE_SINK 3
#define CONFIG_LOOPBACK 2
-static struct usb_device_descriptor
-device_desc = {
+static struct usb_device_descriptor device_desc = {
.bLength = sizeof device_desc,
.bDescriptorType = USB_DT_DEVICE,
- .bcdUSB = __constant_cpu_to_le16 (0x0200),
+ .bcdUSB = __constant_cpu_to_le16(0x0200),
.bDeviceClass = USB_CLASS_VENDOR_SPEC,
- .idVendor = __constant_cpu_to_le16 (DRIVER_VENDOR_NUM),
- .idProduct = __constant_cpu_to_le16 (DRIVER_PRODUCT_NUM),
+ .idVendor = __constant_cpu_to_le16(DRIVER_VENDOR_NUM),
+ .idProduct = __constant_cpu_to_le16(DRIVER_PRODUCT_NUM),
.iManufacturer = STRING_MANUFACTURER,
.iProduct = STRING_PRODUCT,
.iSerialNumber = STRING_SERIAL,
.bNumConfigurations = 2,
};
-static struct usb_config_descriptor
-source_sink_config = {
+static struct usb_config_descriptor source_sink_config = {
.bLength = sizeof source_sink_config,
.bDescriptorType = USB_DT_CONFIG,
@@ -205,8 +201,7 @@
.bMaxPower = 1, /* self-powered */
};
-static struct usb_config_descriptor
-loopback_config = {
+static struct usb_config_descriptor loopback_config = {
.bLength = sizeof loopback_config,
.bDescriptorType = USB_DT_CONFIG,
@@ -218,8 +213,7 @@
.bMaxPower = 1, /* self-powered */
};
-static struct usb_otg_descriptor
-otg_descriptor = {
+static struct usb_otg_descriptor otg_descriptor = {
.bLength = sizeof otg_descriptor,
.bDescriptorType = USB_DT_OTG,
@@ -228,8 +222,7 @@
/* one interface in each configuration */
-static const struct usb_interface_descriptor
-source_sink_intf = {
+static const struct usb_interface_descriptor source_sink_intf = {
.bLength = sizeof source_sink_intf,
.bDescriptorType = USB_DT_INTERFACE,
@@ -238,8 +231,7 @@
.iInterface = STRING_SOURCE_SINK,
};
-static const struct usb_interface_descriptor
-loopback_intf = {
+static const struct usb_interface_descriptor loopback_intf = {
.bLength = sizeof loopback_intf,
.bDescriptorType = USB_DT_INTERFACE,
@@ -250,8 +242,7 @@
/* two full speed bulk endpoints; their use is config-dependent */
-static struct usb_endpoint_descriptor
-fs_source_desc = {
+static struct usb_endpoint_descriptor fs_source_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
@@ -259,8 +250,7 @@
.bmAttributes = USB_ENDPOINT_XFER_BULK,
};
-static struct usb_endpoint_descriptor
-fs_sink_desc = {
+static struct usb_endpoint_descriptor fs_sink_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
@@ -268,7 +258,7 @@
.bmAttributes = USB_ENDPOINT_XFER_BULK,
};
-static const struct usb_descriptor_header *fs_source_sink_function [] = {
+static const struct usb_descriptor_header *fs_source_sink_function[] = {
(struct usb_descriptor_header *) &otg_descriptor,
(struct usb_descriptor_header *) &source_sink_intf,
(struct usb_descriptor_header *) &fs_sink_desc,
@@ -276,7 +266,7 @@
NULL,
};
-static const struct usb_descriptor_header *fs_loopback_function [] = {
+static const struct usb_descriptor_header *fs_loopback_function[] = {
(struct usb_descriptor_header *) &otg_descriptor,
(struct usb_descriptor_header *) &loopback_intf,
(struct usb_descriptor_header *) &fs_sink_desc,
@@ -293,36 +283,33 @@
* for the config descriptor.
*/
-static struct usb_endpoint_descriptor
-hs_source_desc = {
+static struct usb_endpoint_descriptor hs_source_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize = __constant_cpu_to_le16 (512),
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
};
-static struct usb_endpoint_descriptor
-hs_sink_desc = {
+static struct usb_endpoint_descriptor hs_sink_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize = __constant_cpu_to_le16 (512),
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
};
-static struct usb_qualifier_descriptor
-dev_qualifier = {
+static struct usb_qualifier_descriptor dev_qualifier = {
.bLength = sizeof dev_qualifier,
.bDescriptorType = USB_DT_DEVICE_QUALIFIER,
- .bcdUSB = __constant_cpu_to_le16 (0x0200),
+ .bcdUSB = __constant_cpu_to_le16(0x0200),
.bDeviceClass = USB_CLASS_VENDOR_SPEC,
.bNumConfigurations = 2,
};
-static const struct usb_descriptor_header *hs_source_sink_function [] = {
+static const struct usb_descriptor_header *hs_source_sink_function[] = {
(struct usb_descriptor_header *) &otg_descriptor,
(struct usb_descriptor_header *) &source_sink_intf,
(struct usb_descriptor_header *) &hs_source_desc,
@@ -330,7 +317,7 @@
NULL,
};
-static const struct usb_descriptor_header *hs_loopback_function [] = {
+static const struct usb_descriptor_header *hs_loopback_function[] = {
(struct usb_descriptor_header *) &otg_descriptor,
(struct usb_descriptor_header *) &loopback_intf,
(struct usb_descriptor_header *) &hs_source_desc,
@@ -355,7 +342,7 @@
/* static strings, in UTF-8 */
-static struct usb_string strings [] = {
+static struct usb_string strings[] = {
{ STRING_MANUFACTURER, manufacturer, },
{ STRING_PRODUCT, longname, },
{ STRING_SERIAL, serial, },
@@ -364,7 +351,7 @@
{ } /* end of list */
};
-static struct usb_gadget_strings stringtab = {
+static struct usb_gadget_strings stringtab = {
.language = 0x0409, /* en-us */
.strings = strings,
};
@@ -387,8 +374,7 @@
* high bandwidth modes at high speed. (Maybe work like Intel's test
* device?)
*/
-static int
-config_buf (struct usb_gadget *gadget,
+static int config_buf(struct usb_gadget *gadget,
u8 *buf, u8 type, unsigned index)
{
int is_source_sink;
@@ -419,7 +405,7 @@
if (!gadget_is_otg(gadget))
function++;
- len = usb_gadget_config_buf (is_source_sink
+ len = usb_gadget_config_buf(is_source_sink
? &source_sink_config
: &loopback_config,
buf, USB_BUFSIZ, function);
@@ -431,27 +417,26 @@
/*-------------------------------------------------------------------------*/
-static struct usb_request *
-alloc_ep_req (struct usb_ep *ep, unsigned length)
+static struct usb_request *alloc_ep_req(struct usb_ep *ep, unsigned length)
{
struct usb_request *req;
- req = usb_ep_alloc_request (ep, GFP_ATOMIC);
+ req = usb_ep_alloc_request(ep, GFP_ATOMIC);
if (req) {
req->length = length;
req->buf = kmalloc(length, GFP_ATOMIC);
if (!req->buf) {
- usb_ep_free_request (ep, req);
+ usb_ep_free_request(ep, req);
req = NULL;
}
}
return req;
}
-static void free_ep_req (struct usb_ep *ep, struct usb_request *req)
+static void free_ep_req(struct usb_ep *ep, struct usb_request *req)
{
kfree(req->buf);
- usb_ep_free_request (ep, req);
+ usb_ep_free_request(ep, req);
}
/*-------------------------------------------------------------------------*/
@@ -472,7 +457,7 @@
/* optionally require specific source/sink data patterns */
static int
-check_read_data (
+check_read_data(
struct zero_dev *dev,
struct usb_ep *ep,
struct usb_request *req
@@ -498,8 +483,8 @@
continue;
break;
}
- ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf);
- usb_ep_set_halt (ep);
+ ERROR(dev, "bad OUT byte, buf[%d] = %d\n", i, *buf);
+ usb_ep_set_halt(ep);
return -EINVAL;
}
return 0;
@@ -512,7 +497,7 @@
switch (pattern) {
case 0:
- memset (req->buf, 0, req->length);
+ memset(req->buf, 0, req->length);
break;
case 1:
for (i = 0; i < req->length; i++)
@@ -525,7 +510,7 @@
* irq delay between end of one request and start of the next.
* that prevents using hardware dma queues.
*/
-static void source_sink_complete (struct usb_ep *ep, struct usb_request *req)
+static void source_sink_complete(struct usb_ep *ep, struct usb_request *req)
{
struct zero_dev *dev = ep->driver_data;
int status = req->status;
@@ -534,8 +519,8 @@
case 0: /* normal completion? */
if (ep == dev->out_ep) {
- check_read_data (dev, ep, req);
- memset (req->buf, 0x55, req->length);
+ check_read_data(dev, ep, req);
+ memset(req->buf, 0x55, req->length);
} else
reinit_write_data(ep, req);
break;
@@ -544,11 +529,11 @@
case -ECONNABORTED: /* hardware forced ep reset */
case -ECONNRESET: /* request dequeued */
case -ESHUTDOWN: /* disconnect from host */
- VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status,
+ VDBG(dev, "%s gone (%d), %d/%d\n", ep->name, status,
req->actual, req->length);
if (ep == dev->out_ep)
- check_read_data (dev, ep, req);
- free_ep_req (ep, req);
+ check_read_data(dev, ep, req);
+ free_ep_req(ep, req);
return;
case -EOVERFLOW: /* buffer overrun on read means that
@@ -557,18 +542,18 @@
*/
default:
#if 1
- DBG (dev, "%s complete --> %d, %d/%d\n", ep->name,
+ DBG(dev, "%s complete --> %d, %d/%d\n", ep->name,
status, req->actual, req->length);
#endif
case -EREMOTEIO: /* short read */
break;
}
- status = usb_ep_queue (ep, req, GFP_ATOMIC);
+ status = usb_ep_queue(ep, req, GFP_ATOMIC);
if (status) {
- ERROR (dev, "kill %s: resubmit %d bytes --> %d\n",
+ ERROR(dev, "kill %s: resubmit %d bytes --> %d\n",
ep->name, req->length, status);
- usb_ep_set_halt (ep);
+ usb_ep_set_halt(ep);
/* FIXME recover later ... somehow */
}
}
@@ -578,24 +563,24 @@
struct usb_request *req;
int status;
- req = alloc_ep_req (ep, buflen);
+ req = alloc_ep_req(ep, buflen);
if (!req)
return NULL;
- memset (req->buf, 0, req->length);
+ memset(req->buf, 0, req->length);
req->complete = source_sink_complete;
- if (strcmp (ep->name, EP_IN_NAME) == 0)
+ if (strcmp(ep->name, EP_IN_NAME) == 0)
reinit_write_data(ep, req);
else
- memset (req->buf, 0x55, req->length);
+ memset(req->buf, 0x55, req->length);
status = usb_ep_queue(ep, req, GFP_ATOMIC);
if (status) {
struct zero_dev *dev = ep->driver_data;
- ERROR (dev, "start %s --> %d\n", ep->name, status);
- free_ep_req (ep, req);
+ ERROR(dev, "start %s --> %d\n", ep->name, status);
+ free_ep_req(ep, req);
req = NULL;
}
@@ -608,34 +593,34 @@
struct usb_ep *ep;
struct usb_gadget *gadget = dev->gadget;
- gadget_for_each_ep (ep, gadget) {
+ gadget_for_each_ep(ep, gadget) {
const struct usb_endpoint_descriptor *d;
/* one endpoint writes (sources) zeroes in (to the host) */
- if (strcmp (ep->name, EP_IN_NAME) == 0) {
- d = ep_desc (gadget, &hs_source_desc, &fs_source_desc);
- result = usb_ep_enable (ep, d);
+ if (strcmp(ep->name, EP_IN_NAME) == 0) {
+ d = ep_desc(gadget, &hs_source_desc, &fs_source_desc);
+ result = usb_ep_enable(ep, d);
if (result == 0) {
ep->driver_data = dev;
if (source_sink_start_ep(ep) != NULL) {
dev->in_ep = ep;
continue;
}
- usb_ep_disable (ep);
+ usb_ep_disable(ep);
result = -EIO;
}
/* one endpoint reads (sinks) anything out (from the host) */
- } else if (strcmp (ep->name, EP_OUT_NAME) == 0) {
- d = ep_desc (gadget, &hs_sink_desc, &fs_sink_desc);
- result = usb_ep_enable (ep, d);
+ } else if (strcmp(ep->name, EP_OUT_NAME) == 0) {
+ d = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc);
+ result = usb_ep_enable(ep, d);
if (result == 0) {
ep->driver_data = dev;
if (source_sink_start_ep(ep) != NULL) {
dev->out_ep = ep;
continue;
}
- usb_ep_disable (ep);
+ usb_ep_disable(ep);
result = -EIO;
}
@@ -644,11 +629,11 @@
continue;
/* stop on error */
- ERROR (dev, "can't start %s, result %d\n", ep->name, result);
+ ERROR(dev, "can't start %s, result %d\n", ep->name, result);
break;
}
if (result == 0)
- DBG (dev, "buflen %d\n", buflen);
+ DBG(dev, "buflen %d\n", buflen);
/* caller is responsible for cleanup on error */
return result;
@@ -656,7 +641,7 @@
/*-------------------------------------------------------------------------*/
-static void loopback_complete (struct usb_ep *ep, struct usb_request *req)
+static void loopback_complete(struct usb_ep *ep, struct usb_request *req)
{
struct zero_dev *dev = ep->driver_data;
int status = req->status;
@@ -668,19 +653,19 @@
/* loop this OUT packet back IN to the host */
req->zero = (req->actual < req->length);
req->length = req->actual;
- status = usb_ep_queue (dev->in_ep, req, GFP_ATOMIC);
+ status = usb_ep_queue(dev->in_ep, req, GFP_ATOMIC);
if (status == 0)
return;
/* "should never get here" */
- ERROR (dev, "can't loop %s to %s: %d\n",
+ ERROR(dev, "can't loop %s to %s: %d\n",
ep->name, dev->in_ep->name,
status);
}
/* queue the buffer for some later OUT packet */
req->length = buflen;
- status = usb_ep_queue (dev->out_ep, req, GFP_ATOMIC);
+ status = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC);
if (status == 0)
return;
@@ -688,7 +673,7 @@
/* FALLTHROUGH */
default:
- ERROR (dev, "%s loop complete --> %d, %d/%d\n", ep->name,
+ ERROR(dev, "%s loop complete --> %d, %d/%d\n", ep->name,
status, req->actual, req->length);
/* FALLTHROUGH */
@@ -700,7 +685,7 @@
case -ECONNABORTED: /* hardware forced ep reset */
case -ECONNRESET: /* request dequeued */
case -ESHUTDOWN: /* disconnect from host */
- free_ep_req (ep, req);
+ free_ep_req(ep, req);
return;
}
}
@@ -711,13 +696,13 @@
struct usb_ep *ep;
struct usb_gadget *gadget = dev->gadget;
- gadget_for_each_ep (ep, gadget) {
+ gadget_for_each_ep(ep, gadget) {
const struct usb_endpoint_descriptor *d;
/* one endpoint writes data back IN to the host */
- if (strcmp (ep->name, EP_IN_NAME) == 0) {
- d = ep_desc (gadget, &hs_source_desc, &fs_source_desc);
- result = usb_ep_enable (ep, d);
+ if (strcmp(ep->name, EP_IN_NAME) == 0) {
+ d = ep_desc(gadget, &hs_source_desc, &fs_source_desc);
+ result = usb_ep_enable(ep, d);
if (result == 0) {
ep->driver_data = dev;
dev->in_ep = ep;
@@ -725,9 +710,9 @@
}
/* one endpoint just reads OUT packets */
- } else if (strcmp (ep->name, EP_OUT_NAME) == 0) {
- d = ep_desc (gadget, &hs_sink_desc, &fs_sink_desc);
- result = usb_ep_enable (ep, d);
+ } else if (strcmp(ep->name, EP_OUT_NAME) == 0) {
+ d = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc);
+ result = usb_ep_enable(ep, d);
if (result == 0) {
ep->driver_data = dev;
dev->out_ep = ep;
@@ -739,7 +724,7 @@
continue;
/* stop on error */
- ERROR (dev, "can't enable %s, result %d\n", ep->name, result);
+ ERROR(dev, "can't enable %s, result %d\n", ep->name, result);
break;
}
@@ -753,19 +738,19 @@
ep = dev->out_ep;
for (i = 0; i < qlen && result == 0; i++) {
- req = alloc_ep_req (ep, buflen);
+ req = alloc_ep_req(ep, buflen);
if (req) {
req->complete = loopback_complete;
- result = usb_ep_queue (ep, req, GFP_ATOMIC);
+ result = usb_ep_queue(ep, req, GFP_ATOMIC);
if (result)
- DBG (dev, "%s queue req --> %d\n",
+ DBG(dev, "%s queue req --> %d\n",
ep->name, result);
} else
result = -ENOMEM;
}
}
if (result == 0)
- DBG (dev, "qlen %d, buflen %d\n", qlen, buflen);
+ DBG(dev, "qlen %d, buflen %d\n", qlen, buflen);
/* caller is responsible for cleanup on error */
return result;
@@ -773,26 +758,26 @@
/*-------------------------------------------------------------------------*/
-static void zero_reset_config (struct zero_dev *dev)
+static void zero_reset_config(struct zero_dev *dev)
{
if (dev->config == 0)
return;
- DBG (dev, "reset config\n");
+ DBG(dev, "reset config\n");
/* just disable endpoints, forcing completion of pending i/o.
* all our completion handlers free their requests in this case.
*/
if (dev->in_ep) {
- usb_ep_disable (dev->in_ep);
+ usb_ep_disable(dev->in_ep);
dev->in_ep = NULL;
}
if (dev->out_ep) {
- usb_ep_disable (dev->out_ep);
+ usb_ep_disable(dev->out_ep);
dev->out_ep = NULL;
}
dev->config = 0;
- del_timer (&dev->resume);
+ del_timer(&dev->resume);
}
/* change our operational config. this code must agree with the code
@@ -813,12 +798,12 @@
if (number == dev->config)
return 0;
- if (gadget_is_sa1100 (gadget) && dev->config) {
+ if (gadget_is_sa1100(gadget) && dev->config) {
/* tx fifo is full, but we can't clear it...*/
ERROR(dev, "can't change configurations\n");
return -ESPIPE;
}
- zero_reset_config (dev);
+ zero_reset_config(dev);
switch (number) {
case CONFIG_SOURCE_SINK:
@@ -837,7 +822,7 @@
if (!result && (!dev->in_ep || !dev->out_ep))
result = -ENODEV;
if (result)
- zero_reset_config (dev);
+ zero_reset_config(dev);
else {
char *speed;
@@ -849,7 +834,7 @@
}
dev->config = number;
- INFO (dev, "%s speed config #%d: %s\n", speed, number,
+ INFO(dev, "%s speed config #%d: %s\n", speed, number,
(number == CONFIG_SOURCE_SINK)
? source_sink : loopback);
}
@@ -858,10 +843,10 @@
/*-------------------------------------------------------------------------*/
-static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req)
+static void zero_setup_complete(struct usb_ep *ep, struct usb_request *req)
{
if (req->status || req->actual != req->length)
- DBG ((struct zero_dev *) ep->driver_data,
+ DBG((struct zero_dev *) ep->driver_data,
"setup complete --> %d, %d/%d\n",
req->status, req->actual, req->length);
}
@@ -874,9 +859,9 @@
* the work is in config-specific setup.
*/
static int
-zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
+zero_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
{
- struct zero_dev *dev = get_gadget_data (gadget);
+ struct zero_dev *dev = get_gadget_data(gadget);
struct usb_request *req = dev->req;
int value = -EOPNOTSUPP;
u16 w_index = le16_to_cpu(ctrl->wIndex);
@@ -895,14 +880,14 @@
switch (w_value >> 8) {
case USB_DT_DEVICE:
- value = min (w_length, (u16) sizeof device_desc);
- memcpy (req->buf, &device_desc, value);
+ value = min(w_length, (u16) sizeof device_desc);
+ memcpy(req->buf, &device_desc, value);
break;
case USB_DT_DEVICE_QUALIFIER:
if (!gadget_is_dualspeed(gadget))
break;
- value = min (w_length, (u16) sizeof dev_qualifier);
- memcpy (req->buf, &dev_qualifier, value);
+ value = min(w_length, (u16) sizeof dev_qualifier);
+ memcpy(req->buf, &dev_qualifier, value);
break;
case USB_DT_OTHER_SPEED_CONFIG:
@@ -910,11 +895,11 @@
break;
// FALLTHROUGH
case USB_DT_CONFIG:
- value = config_buf (gadget, req->buf,
+ value = config_buf(gadget, req->buf,
w_value >> 8,
w_value & 0xff);
if (value >= 0)
- value = min (w_length, (u16) value);
+ value = min(w_length, (u16) value);
break;
case USB_DT_STRING:
@@ -923,10 +908,10 @@
* add string tables for other languages, using
* any UTF-8 characters
*/
- value = usb_gadget_get_string (&stringtab,
+ value = usb_gadget_get_string(&stringtab,
w_value & 0xff, req->buf);
if (value >= 0)
- value = min (w_length, (u16) value);
+ value = min(w_length, (u16) value);
break;
}
break;
@@ -936,20 +921,20 @@
if (ctrl->bRequestType != 0)
goto unknown;
if (gadget->a_hnp_support)
- DBG (dev, "HNP available\n");
+ DBG(dev, "HNP available\n");
else if (gadget->a_alt_hnp_support)
- DBG (dev, "HNP needs a different root port\n");
+ DBG(dev, "HNP needs a different root port\n");
else
- VDBG (dev, "HNP inactive\n");
- spin_lock (&dev->lock);
+ VDBG(dev, "HNP inactive\n");
+ spin_lock(&dev->lock);
value = zero_set_config(dev, w_value);
- spin_unlock (&dev->lock);
+ spin_unlock(&dev->lock);
break;
case USB_REQ_GET_CONFIGURATION:
if (ctrl->bRequestType != USB_DIR_IN)
goto unknown;
*(u8 *)req->buf = dev->config;
- value = min (w_length, (u16) 1);
+ value = min(w_length, (u16) 1);
break;
/* until we add altsetting support, or other interfaces,
@@ -959,7 +944,7 @@
case USB_REQ_SET_INTERFACE:
if (ctrl->bRequestType != USB_RECIP_INTERFACE)
goto unknown;
- spin_lock (&dev->lock);
+ spin_lock(&dev->lock);
if (dev->config && w_index == 0 && w_value == 0) {
u8 config = dev->config;
@@ -970,11 +955,11 @@
* if we had more than one interface we couldn't
* use this "reset the config" shortcut.
*/
- zero_reset_config (dev);
+ zero_reset_config(dev);
zero_set_config(dev, config);
value = 0;
}
- spin_unlock (&dev->lock);
+ spin_unlock(&dev->lock);
break;
case USB_REQ_GET_INTERFACE:
if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
@@ -986,7 +971,7 @@
break;
}
*(u8 *)req->buf = 0;
- value = min (w_length, (u16) 1);
+ value = min(w_length, (u16) 1);
break;
/*
@@ -1018,7 +1003,7 @@
default:
unknown:
- VDBG (dev,
+ VDBG(dev,
"unknown control req%02x.%02x v%04x i%04x l%d\n",
ctrl->bRequestType, ctrl->bRequest,
w_value, w_index, w_length);
@@ -1028,11 +1013,11 @@
if (value >= 0) {
req->length = value;
req->zero = value < w_length;
- value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
+ value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
if (value < 0) {
- DBG (dev, "ep_queue --> %d\n", value);
+ DBG(dev, "ep_queue --> %d\n", value);
req->status = 0;
- zero_setup_complete (gadget->ep0, req);
+ zero_setup_complete(gadget->ep0, req);
}
}
@@ -1040,28 +1025,26 @@
return value;
}
-static void
-zero_disconnect (struct usb_gadget *gadget)
+static void zero_disconnect(struct usb_gadget *gadget)
{
- struct zero_dev *dev = get_gadget_data (gadget);
+ struct zero_dev *dev = get_gadget_data(gadget);
unsigned long flags;
- spin_lock_irqsave (&dev->lock, flags);
- zero_reset_config (dev);
+ spin_lock_irqsave(&dev->lock, flags);
+ zero_reset_config(dev);
/* a more significant application might have some non-usb
* activities to quiesce here, saving resources like power
* or pushing the notification up a network stack.
*/
- spin_unlock_irqrestore (&dev->lock, flags);
+ spin_unlock_irqrestore(&dev->lock, flags);
/* next we may get setup() calls to enumerate new connections;
* or an unbind() during shutdown (including removing module).
*/
}
-static void
-zero_autoresume (unsigned long _dev)
+static void zero_autoresume(unsigned long _dev)
{
struct zero_dev *dev = (struct zero_dev *) _dev;
int status;
@@ -1070,32 +1053,30 @@
* more significant than just a timer firing...
*/
if (dev->gadget->speed != USB_SPEED_UNKNOWN) {
- status = usb_gadget_wakeup (dev->gadget);
- DBG (dev, "wakeup --> %d\n", status);
+ status = usb_gadget_wakeup(dev->gadget);
+ DBG(dev, "wakeup --> %d\n", status);
}
}
/*-------------------------------------------------------------------------*/
-static void /* __init_or_exit */
-zero_unbind (struct usb_gadget *gadget)
+static void zero_unbind(struct usb_gadget *gadget)
{
- struct zero_dev *dev = get_gadget_data (gadget);
+ struct zero_dev *dev = get_gadget_data(gadget);
- DBG (dev, "unbind\n");
+ DBG(dev, "unbind\n");
/* we've already been disconnected ... no i/o is active */
if (dev->req) {
dev->req->length = USB_BUFSIZ;
- free_ep_req (gadget->ep0, dev->req);
+ free_ep_req(gadget->ep0, dev->req);
}
- del_timer_sync (&dev->resume);
- kfree (dev);
- set_gadget_data (gadget, NULL);
+ del_timer_sync(&dev->resume);
+ kfree(dev);
+ set_gadget_data(gadget, NULL);
}
-static int __init
-zero_bind (struct usb_gadget *gadget)
+static int __init zero_bind(struct usb_gadget *gadget)
{
struct zero_dev *dev;
struct usb_ep *ep;
@@ -1111,8 +1092,8 @@
* autoconfigure on any sane usb controller driver,
* but there may also be important quirks to address.
*/
- usb_ep_autoconfig_reset (gadget);
- ep = usb_ep_autoconfig (gadget, &fs_source_desc);
+ usb_ep_autoconfig_reset(gadget);
+ ep = usb_ep_autoconfig(gadget, &fs_source_desc);
if (!ep) {
autoconf_fail:
pr_err("%s: can't autoconfigure on %s\n",
@@ -1122,15 +1103,15 @@
EP_IN_NAME = ep->name;
ep->driver_data = ep; /* claim */
- ep = usb_ep_autoconfig (gadget, &fs_sink_desc);
+ ep = usb_ep_autoconfig(gadget, &fs_sink_desc);
if (!ep)
goto autoconf_fail;
EP_OUT_NAME = ep->name;
ep->driver_data = ep; /* claim */
- gcnum = usb_gadget_controller_number (gadget);
+ gcnum = usb_gadget_controller_number(gadget);
if (gcnum >= 0)
- device_desc.bcdDevice = cpu_to_le16 (0x0200 + gcnum);
+ device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
else {
/* gadget zero is so simple (for now, no altsettings) that
* it SHOULD NOT have problems with bulk-capable hardware.
@@ -1141,7 +1122,7 @@
*/
pr_warning("%s: controller '%s' not recognized\n",
shortname, gadget->name);
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x9999);
+ device_desc.bcdDevice = __constant_cpu_to_le16(0x9999);
}
@@ -1149,12 +1130,16 @@
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
- spin_lock_init (&dev->lock);
+ spin_lock_init(&dev->lock);
dev->gadget = gadget;
- set_gadget_data (gadget, dev);
+ set_gadget_data(gadget, dev);
+
+ init_timer(&dev->resume);
+ dev->resume.function = zero_autoresume;
+ dev->resume.data = (unsigned long) dev;
/* preallocate control response and buffer */
- dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL);
+ dev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
if (!dev->req)
goto enomem;
dev->req->buf = kmalloc(USB_BUFSIZ, GFP_KERNEL);
@@ -1182,11 +1167,8 @@
loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
- usb_gadget_set_selfpowered (gadget);
+ usb_gadget_set_selfpowered(gadget);
- init_timer (&dev->resume);
- dev->resume.function = zero_autoresume;
- dev->resume.data = (unsigned long) dev;
if (autoresume) {
source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
@@ -1194,45 +1176,43 @@
gadget->ep0->driver_data = dev;
- INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname);
- INFO (dev, "using %s, OUT %s IN %s\n", gadget->name,
+ INFO(dev, "%s, version: " DRIVER_VERSION "\n", longname);
+ INFO(dev, "using %s, OUT %s IN %s\n", gadget->name,
EP_OUT_NAME, EP_IN_NAME);
- snprintf (manufacturer, sizeof manufacturer, "%s %s with %s",
+ snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
init_utsname()->sysname, init_utsname()->release,
gadget->name);
return 0;
enomem:
- zero_unbind (gadget);
+ zero_unbind(gadget);
return -ENOMEM;
}
/*-------------------------------------------------------------------------*/
-static void
-zero_suspend (struct usb_gadget *gadget)
+static void zero_suspend(struct usb_gadget *gadget)
{
- struct zero_dev *dev = get_gadget_data (gadget);
+ struct zero_dev *dev = get_gadget_data(gadget);
if (gadget->speed == USB_SPEED_UNKNOWN)
return;
if (autoresume) {
- mod_timer (&dev->resume, jiffies + (HZ * autoresume));
- DBG (dev, "suspend, wakeup in %d seconds\n", autoresume);
+ mod_timer(&dev->resume, jiffies + (HZ * autoresume));
+ DBG(dev, "suspend, wakeup in %d seconds\n", autoresume);
} else
- DBG (dev, "suspend\n");
+ DBG(dev, "suspend\n");
}
-static void
-zero_resume (struct usb_gadget *gadget)
+static void zero_resume(struct usb_gadget *gadget)
{
- struct zero_dev *dev = get_gadget_data (gadget);
+ struct zero_dev *dev = get_gadget_data(gadget);
- DBG (dev, "resume\n");
- del_timer (&dev->resume);
+ DBG(dev, "resume\n");
+ del_timer(&dev->resume);
}
@@ -1264,15 +1244,15 @@
MODULE_LICENSE("GPL");
-static int __init init (void)
+static int __init init(void)
{
- return usb_gadget_register_driver (&zero_driver);
+ return usb_gadget_register_driver(&zero_driver);
}
-module_init (init);
+module_init(init);
-static void __exit cleanup (void)
+static void __exit cleanup(void)
{
- usb_gadget_unregister_driver (&zero_driver);
+ usb_gadget_unregister_driver(&zero_driver);
}
-module_exit (cleanup);
+module_exit(cleanup);
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 0b87480..1ef6df3 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -4,6 +4,19 @@
comment "USB Host Controller Drivers"
depends on USB
+config USB_C67X00_HCD
+ tristate "Cypress C67x00 HCD support"
+ depends on USB
+ help
+ The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
+ host/peripheral/OTG USB controllers.
+
+ Enable this option to support this chip in host controller mode.
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called c67x00.
+
config USB_EHCI_HCD
tristate "EHCI HCD (USB 2.0) support"
depends on USB && USB_ARCH_HAS_EHCI
@@ -95,6 +108,32 @@
To compile this driver as a module, choose M here: the
module will be called isp116x-hcd.
+config USB_ISP1760_HCD
+ tristate "ISP 1760 HCD support"
+ depends on USB && EXPERIMENTAL
+ ---help---
+ The ISP1760 chip is a USB 2.0 host controller.
+
+ This driver does not support isochronous transfers or OTG.
+
+ To compile this driver as a module, choose M here: the
+ module will be called isp1760-hcd.
+
+config USB_ISP1760_PCI
+ bool "Support for the PCI bus"
+ depends on USB_ISP1760_HCD && PCI
+ ---help---
+ Enables support for the device present on the PCI bus.
+ This should only be required if you happen to have the eval kit from
+ NXP and you are going to test it.
+
+config USB_ISP1760_OF
+ bool "Support for the OF platform bus"
+ depends on USB_ISP1760_HCD && PPC_OF
+ ---help---
+ Enables support for the device present on the PowerPC
+ OpenFirmware platform bus.
+
config USB_OHCI_HCD
tristate "OHCI HCD support"
depends on USB && USB_ARCH_HAS_OHCI
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index bb8e9d4..f1edda2 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -6,6 +6,8 @@
EXTRA_CFLAGS += -DDEBUG
endif
+isp1760-objs := isp1760-hcd.o isp1760-if.o
+
obj-$(CONFIG_PCI) += pci-quirks.o
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
@@ -16,4 +18,4 @@
obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
-
+obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
new file mode 100644
index 0000000..4ba96c1
--- /dev/null
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -0,0 +1,2231 @@
+/*
+ * Driver for the NXP ISP1760 chip
+ *
+ * However, the code might contain some bugs. What doesn't work for sure is:
+ * - ISO
+ * - OTG
+ e The interrupt line is configured as active low, level.
+ *
+ * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de>
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <asm/unaligned.h>
+
+#include "../core/hcd.h"
+#include "isp1760-hcd.h"
+
+static struct kmem_cache *qtd_cachep;
+static struct kmem_cache *qh_cachep;
+
+struct isp1760_hcd {
+ u32 hcs_params;
+ spinlock_t lock;
+ struct inter_packet_info atl_ints[32];
+ struct inter_packet_info int_ints[32];
+ struct memory_chunk memory_pool[BLOCKS];
+
+ /* periodic schedule support */
+#define DEFAULT_I_TDPS 1024
+ unsigned periodic_size;
+ unsigned i_thresh;
+ unsigned long reset_done;
+ unsigned long next_statechange;
+};
+
+static inline struct isp1760_hcd *hcd_to_priv(struct usb_hcd *hcd)
+{
+ return (struct isp1760_hcd *) (hcd->hcd_priv);
+}
+static inline struct usb_hcd *priv_to_hcd(struct isp1760_hcd *priv)
+{
+ return container_of((void *) priv, struct usb_hcd, hcd_priv);
+}
+
+/* Section 2.2 Host Controller Capability Registers */
+#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */
+#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */
+#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */
+#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */
+#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
+#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */
+#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */
+
+/* Section 2.3 Host Controller Operational Registers */
+#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */
+#define CMD_RESET (1<<1) /* reset HC not bus */
+#define CMD_RUN (1<<0) /* start/stop HC */
+#define STS_PCD (1<<2) /* port change detect */
+#define FLAG_CF (1<<0) /* true: we'll support "high speed" */
+
+#define PORT_OWNER (1<<13) /* true: companion hc owns this port */
+#define PORT_POWER (1<<12) /* true: has power (see PPC) */
+#define PORT_USB11(x) (((x) & (3 << 10)) == (1 << 10)) /* USB 1.1 device */
+#define PORT_RESET (1<<8) /* reset port */
+#define PORT_SUSPEND (1<<7) /* suspend port */
+#define PORT_RESUME (1<<6) /* resume it */
+#define PORT_PE (1<<2) /* port enable */
+#define PORT_CSC (1<<1) /* connect status change */
+#define PORT_CONNECT (1<<0) /* device connected */
+#define PORT_RWC_BITS (PORT_CSC)
+
+struct isp1760_qtd {
+ struct isp1760_qtd *hw_next;
+ u8 packet_type;
+ u8 toggle;
+
+ void *data_buffer;
+ /* the rest is HCD-private */
+ struct list_head qtd_list;
+ struct urb *urb;
+ size_t length;
+
+ /* isp special*/
+ u32 status;
+#define URB_COMPLETE_NOTIFY (1 << 0)
+#define URB_ENQUEUED (1 << 1)
+#define URB_TYPE_ATL (1 << 2)
+#define URB_TYPE_INT (1 << 3)
+};
+
+struct isp1760_qh {
+ /* first part defined by EHCI spec */
+ struct list_head qtd_list;
+ struct isp1760_hcd *priv;
+
+ /* periodic schedule info */
+ unsigned short period; /* polling interval */
+ struct usb_device *dev;
+
+ u32 toggle;
+ u32 ping;
+};
+
+#define ehci_port_speed(priv, portsc) (1 << USB_PORT_FEAT_HIGHSPEED)
+
+static unsigned int isp1760_readl(__u32 __iomem *regs)
+{
+ return readl(regs);
+}
+
+static void isp1760_writel(const unsigned int val, __u32 __iomem *regs)
+{
+ writel(val, regs);
+}
+
+/*
+ * The next two copy via MMIO data to/from the device. memcpy_{to|from}io()
+ * doesn't quite work because some people have to enforce 32-bit access
+ */
+static void priv_read_copy(struct isp1760_hcd *priv, u32 *src,
+ __u32 __iomem *dst, u32 offset, u32 len)
+{
+ struct usb_hcd *hcd = priv_to_hcd(priv);
+ u32 val;
+ u8 *buff8;
+
+ if (!src) {
+ printk(KERN_ERR "ERROR: buffer: %p len: %d\n", src, len);
+ return;
+ }
+ isp1760_writel(offset, hcd->regs + HC_MEMORY_REG);
+ /* XXX
+ * 90nsec delay, the spec says something how this could be avoided.
+ */
+ mdelay(1);
+
+ while (len >= 4) {
+ *src = __raw_readl(dst);
+ len -= 4;
+ src++;
+ dst++;
+ }
+
+ if (!len)
+ return;
+
+ /* in case we have 3, 2 or 1 by left. The dst buffer may not be fully
+ * allocated.
+ */
+ val = isp1760_readl(dst);
+
+ buff8 = (u8 *)src;
+ while (len) {
+
+ *buff8 = val;
+ val >>= 8;
+ len--;
+ buff8++;
+ }
+}
+
+static void priv_write_copy(const struct isp1760_hcd *priv, const u32 *src,
+ __u32 __iomem *dst, u32 len)
+{
+ while (len >= 4) {
+ __raw_writel(*src, dst);
+ len -= 4;
+ src++;
+ dst++;
+ }
+
+ if (!len)
+ return;
+ /* in case we have 3, 2 or 1 by left. The buffer is allocated and the
+ * extra bytes should not be read by the HW
+ */
+
+ __raw_writel(*src, dst);
+}
+
+/* memory management of the 60kb on the chip from 0x1000 to 0xffff */
+static void init_memory(struct isp1760_hcd *priv)
+{
+ int i;
+ u32 payload;
+
+ payload = 0x1000;
+ for (i = 0; i < BLOCK_1_NUM; i++) {
+ priv->memory_pool[i].start = payload;
+ priv->memory_pool[i].size = BLOCK_1_SIZE;
+ priv->memory_pool[i].free = 1;
+ payload += priv->memory_pool[i].size;
+ }
+
+
+ for (i = BLOCK_1_NUM; i < BLOCK_1_NUM + BLOCK_2_NUM; i++) {
+ priv->memory_pool[i].start = payload;
+ priv->memory_pool[i].size = BLOCK_2_SIZE;
+ priv->memory_pool[i].free = 1;
+ payload += priv->memory_pool[i].size;
+ }
+
+
+ for (i = BLOCK_1_NUM + BLOCK_2_NUM; i < BLOCKS; i++) {
+ priv->memory_pool[i].start = payload;
+ priv->memory_pool[i].size = BLOCK_3_SIZE;
+ priv->memory_pool[i].free = 1;
+ payload += priv->memory_pool[i].size;
+ }
+
+ BUG_ON(payload - priv->memory_pool[i - 1].size > PAYLOAD_SIZE);
+}
+
+static u32 alloc_mem(struct isp1760_hcd *priv, u32 size)
+{
+ int i;
+
+ if (!size)
+ return ISP1760_NULL_POINTER;
+
+ for (i = 0; i < BLOCKS; i++) {
+ if (priv->memory_pool[i].size >= size &&
+ priv->memory_pool[i].free) {
+
+ priv->memory_pool[i].free = 0;
+ return priv->memory_pool[i].start;
+ }
+ }
+
+ printk(KERN_ERR "ISP1760 MEM: can not allocate %d bytes of memory\n",
+ size);
+ printk(KERN_ERR "Current memory map:\n");
+ for (i = 0; i < BLOCKS; i++) {
+ printk(KERN_ERR "Pool %2d size %4d status: %d\n",
+ i, priv->memory_pool[i].size,
+ priv->memory_pool[i].free);
+ }
+ /* XXX maybe -ENOMEM could be possible */
+ BUG();
+ return 0;
+}
+
+static void free_mem(struct isp1760_hcd *priv, u32 mem)
+{
+ int i;
+
+ if (mem == ISP1760_NULL_POINTER)
+ return;
+
+ for (i = 0; i < BLOCKS; i++) {
+ if (priv->memory_pool[i].start == mem) {
+
+ BUG_ON(priv->memory_pool[i].free);
+
+ priv->memory_pool[i].free = 1;
+ return ;
+ }
+ }
+
+ printk(KERN_ERR "Trying to free not-here-allocated memory :%08x\n",
+ mem);
+ BUG();
+}
+
+static void isp1760_init_regs(struct usb_hcd *hcd)
+{
+ isp1760_writel(0, hcd->regs + HC_BUFFER_STATUS_REG);
+ isp1760_writel(NO_TRANSFER_ACTIVE, hcd->regs +
+ HC_ATL_PTD_SKIPMAP_REG);
+ isp1760_writel(NO_TRANSFER_ACTIVE, hcd->regs +
+ HC_INT_PTD_SKIPMAP_REG);
+ isp1760_writel(NO_TRANSFER_ACTIVE, hcd->regs +
+ HC_ISO_PTD_SKIPMAP_REG);
+
+ isp1760_writel(~NO_TRANSFER_ACTIVE, hcd->regs +
+ HC_ATL_PTD_DONEMAP_REG);
+ isp1760_writel(~NO_TRANSFER_ACTIVE, hcd->regs +
+ HC_INT_PTD_DONEMAP_REG);
+ isp1760_writel(~NO_TRANSFER_ACTIVE, hcd->regs +
+ HC_ISO_PTD_DONEMAP_REG);
+}
+
+static int handshake(struct isp1760_hcd *priv, void __iomem *ptr,
+ u32 mask, u32 done, int usec)
+{
+ u32 result;
+
+ do {
+ result = isp1760_readl(ptr);
+ if (result == ~0)
+ return -ENODEV;
+ result &= mask;
+ if (result == done)
+ return 0;
+ udelay(1);
+ usec--;
+ } while (usec > 0);
+ return -ETIMEDOUT;
+}
+
+/* reset a non-running (STS_HALT == 1) controller */
+static int ehci_reset(struct isp1760_hcd *priv)
+{
+ int retval;
+ struct usb_hcd *hcd = priv_to_hcd(priv);
+ u32 command = isp1760_readl(hcd->regs + HC_USBCMD);
+
+ command |= CMD_RESET;
+ isp1760_writel(command, hcd->regs + HC_USBCMD);
+ hcd->state = HC_STATE_HALT;
+ priv->next_statechange = jiffies;
+ retval = handshake(priv, hcd->regs + HC_USBCMD,
+ CMD_RESET, 0, 250 * 1000);
+ return retval;
+}
+
+static void qh_destroy(struct isp1760_qh *qh)
+{
+ BUG_ON(!list_empty(&qh->qtd_list));
+ kmem_cache_free(qh_cachep, qh);
+}
+
+static struct isp1760_qh *isp1760_qh_alloc(struct isp1760_hcd *priv,
+ gfp_t flags)
+{
+ struct isp1760_qh *qh;
+
+ qh = kmem_cache_zalloc(qh_cachep, flags);
+ if (!qh)
+ return qh;
+
+ INIT_LIST_HEAD(&qh->qtd_list);
+ qh->priv = priv;
+ return qh;
+}
+
+/* magic numbers that can affect system performance */
+#define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */
+#define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */
+#define EHCI_TUNE_RL_TT 0
+#define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */
+#define EHCI_TUNE_MULT_TT 1
+#define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */
+
+/* one-time init, only for memory state */
+static int priv_init(struct usb_hcd *hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ u32 hcc_params;
+
+ spin_lock_init(&priv->lock);
+
+ /*
+ * hw default: 1K periodic list heads, one per frame.
+ * periodic_size can shrink by USBCMD update if hcc_params allows.
+ */
+ priv->periodic_size = DEFAULT_I_TDPS;
+
+ /* controllers may cache some of the periodic schedule ... */
+ hcc_params = isp1760_readl(hcd->regs + HC_HCCPARAMS);
+ /* full frame cache */
+ if (HCC_ISOC_CACHE(hcc_params))
+ priv->i_thresh = 8;
+ else /* N microframes cached */
+ priv->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
+
+ return 0;
+}
+
+static int isp1760_hc_setup(struct usb_hcd *hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ int result;
+ u32 scratch;
+
+ isp1760_writel(0xdeadbabe, hcd->regs + HC_SCRATCH_REG);
+ scratch = isp1760_readl(hcd->regs + HC_SCRATCH_REG);
+ if (scratch != 0xdeadbabe) {
+ printk(KERN_ERR "ISP1760: Scratch test failed.\n");
+ return -ENODEV;
+ }
+
+ /* pre reset */
+ isp1760_init_regs(hcd);
+
+ /* reset */
+ isp1760_writel(SW_RESET_RESET_ALL, hcd->regs + HC_RESET_REG);
+ mdelay(100);
+
+ isp1760_writel(SW_RESET_RESET_HC, hcd->regs + HC_RESET_REG);
+ mdelay(100);
+
+ result = ehci_reset(priv);
+ if (result)
+ return result;
+
+ /* Step 11 passed */
+
+ isp1760_writel(INTERRUPT_ENABLE_MASK, hcd->regs + HC_INTERRUPT_REG);
+ isp1760_writel(INTERRUPT_ENABLE_MASK, hcd->regs + HC_INTERRUPT_ENABLE);
+
+ /* ATL reset */
+ scratch = isp1760_readl(hcd->regs + HC_HW_MODE_CTRL);
+ isp1760_writel(scratch | ALL_ATX_RESET, hcd->regs + HC_HW_MODE_CTRL);
+ mdelay(10);
+ isp1760_writel(scratch, hcd->regs + HC_HW_MODE_CTRL);
+
+ isp1760_writel(PORT1_POWER | PORT1_INIT2, hcd->regs + HC_PORT1_CTRL);
+ mdelay(10);
+
+ priv->hcs_params = isp1760_readl(hcd->regs + HC_HCSPARAMS);
+
+ return priv_init(hcd);
+}
+
+static void isp1760_init_maps(struct usb_hcd *hcd)
+{
+ /*set last maps, for iso its only 1, else 32 tds bitmap*/
+ isp1760_writel(0x80000000, hcd->regs + HC_ATL_PTD_LASTPTD_REG);
+ isp1760_writel(0x80000000, hcd->regs + HC_INT_PTD_LASTPTD_REG);
+ isp1760_writel(0x00000001, hcd->regs + HC_ISO_PTD_LASTPTD_REG);
+}
+
+static void isp1760_enable_interrupts(struct usb_hcd *hcd)
+{
+ isp1760_writel(0, hcd->regs + HC_ATL_IRQ_MASK_AND_REG);
+ isp1760_writel(0, hcd->regs + HC_ATL_IRQ_MASK_OR_REG);
+ isp1760_writel(0, hcd->regs + HC_INT_IRQ_MASK_AND_REG);
+ isp1760_writel(0, hcd->regs + HC_INT_IRQ_MASK_OR_REG);
+ isp1760_writel(0, hcd->regs + HC_ISO_IRQ_MASK_AND_REG);
+ isp1760_writel(0xffffffff, hcd->regs + HC_ISO_IRQ_MASK_OR_REG);
+ /* step 23 passed */
+}
+
+static int isp1760_run(struct usb_hcd *hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ int retval;
+ u32 temp;
+ u32 command;
+ u32 chipid;
+
+ hcd->uses_new_polling = 1;
+ hcd->poll_rh = 0;
+
+ hcd->state = HC_STATE_RUNNING;
+ isp1760_enable_interrupts(hcd);
+ temp = isp1760_readl(hcd->regs + HC_HW_MODE_CTRL);
+ temp |= FINAL_HW_CONFIG;
+ isp1760_writel(temp, hcd->regs + HC_HW_MODE_CTRL);
+
+ command = isp1760_readl(hcd->regs + HC_USBCMD);
+ command &= ~(CMD_LRESET|CMD_RESET);
+ command |= CMD_RUN;
+ isp1760_writel(command, hcd->regs + HC_USBCMD);
+
+ retval = handshake(priv, hcd->regs + HC_USBCMD, CMD_RUN, CMD_RUN,
+ 250 * 1000);
+ if (retval)
+ return retval;
+
+ /*
+ * XXX
+ * Spec says to write FLAG_CF as last config action, priv code grabs
+ * the semaphore while doing so.
+ */
+ down_write(&ehci_cf_port_reset_rwsem);
+ isp1760_writel(FLAG_CF, hcd->regs + HC_CONFIGFLAG);
+
+ retval = handshake(priv, hcd->regs + HC_CONFIGFLAG, FLAG_CF, FLAG_CF,
+ 250 * 1000);
+ up_write(&ehci_cf_port_reset_rwsem);
+ if (retval)
+ return retval;
+
+ chipid = isp1760_readl(hcd->regs + HC_CHIP_ID_REG);
+ isp1760_info(priv, "USB ISP %04x HW rev. %d started\n", chipid & 0xffff,
+ chipid >> 16);
+
+ /* PTD Register Init Part 2, Step 28 */
+ /* enable INTs */
+ isp1760_init_maps(hcd);
+
+ /* GRR this is run-once init(), being done every time the HC starts.
+ * So long as they're part of class devices, we can't do it init()
+ * since the class device isn't created that early.
+ */
+ return 0;
+}
+
+static u32 base_to_chip(u32 base)
+{
+ return ((base - 0x400) >> 3);
+}
+
+static void transform_into_atl(struct isp1760_hcd *priv, struct isp1760_qh *qh,
+ struct isp1760_qtd *qtd, struct urb *urb,
+ u32 payload, struct ptd *ptd)
+{
+ u32 dw0;
+ u32 dw1;
+ u32 dw2;
+ u32 dw3;
+ u32 maxpacket;
+ u32 multi;
+ u32 pid_code;
+ u32 rl = RL_COUNTER;
+ u32 nak = NAK_COUNTER;
+
+ /* according to 3.6.2, max packet len can not be > 0x400 */
+ maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
+ multi = 1 + ((maxpacket >> 11) & 0x3);
+ maxpacket &= 0x7ff;
+
+ /* DW0 */
+ dw0 = PTD_VALID;
+ dw0 |= PTD_LENGTH(qtd->length);
+ dw0 |= PTD_MAXPACKET(maxpacket);
+ dw0 |= PTD_ENDPOINT(usb_pipeendpoint(urb->pipe));
+ dw1 = usb_pipeendpoint(urb->pipe) >> 1;
+
+ /* DW1 */
+ dw1 |= PTD_DEVICE_ADDR(usb_pipedevice(urb->pipe));
+
+ pid_code = qtd->packet_type;
+ dw1 |= PTD_PID_TOKEN(pid_code);
+
+ if (usb_pipebulk(urb->pipe))
+ dw1 |= PTD_TRANS_BULK;
+ else if (usb_pipeint(urb->pipe))
+ dw1 |= PTD_TRANS_INT;
+
+ if (urb->dev->speed != USB_SPEED_HIGH) {
+ /* split transaction */
+
+ dw1 |= PTD_TRANS_SPLIT;
+ if (urb->dev->speed == USB_SPEED_LOW)
+ dw1 |= PTD_SE_USB_LOSPEED;
+
+ dw1 |= PTD_PORT_NUM(urb->dev->ttport);
+ dw1 |= PTD_HUB_NUM(urb->dev->tt->hub->devnum);
+
+ /* SE bit for Split INT transfers */
+ if (usb_pipeint(urb->pipe) &&
+ (urb->dev->speed == USB_SPEED_LOW))
+ dw1 |= 2 << 16;
+
+ dw3 = 0;
+ rl = 0;
+ nak = 0;
+ } else {
+ dw0 |= PTD_MULTI(multi);
+ if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe))
+ dw3 = qh->ping;
+ else
+ dw3 = 0;
+ }
+ /* DW2 */
+ dw2 = 0;
+ dw2 |= PTD_DATA_START_ADDR(base_to_chip(payload));
+ dw2 |= PTD_RL_CNT(rl);
+ dw3 |= PTD_NAC_CNT(nak);
+
+ /* DW3 */
+ if (usb_pipecontrol(urb->pipe))
+ dw3 |= PTD_DATA_TOGGLE(qtd->toggle);
+ else
+ dw3 |= qh->toggle;
+
+
+ dw3 |= PTD_ACTIVE;
+ /* Cerr */
+ dw3 |= PTD_CERR(ERR_COUNTER);
+
+ memset(ptd, 0, sizeof(*ptd));
+
+ ptd->dw0 = cpu_to_le32(dw0);
+ ptd->dw1 = cpu_to_le32(dw1);
+ ptd->dw2 = cpu_to_le32(dw2);
+ ptd->dw3 = cpu_to_le32(dw3);
+}
+
+static void transform_add_int(struct isp1760_hcd *priv, struct isp1760_qh *qh,
+ struct isp1760_qtd *qtd, struct urb *urb,
+ u32 payload, struct ptd *ptd)
+{
+ u32 maxpacket;
+ u32 multi;
+ u32 numberofusofs;
+ u32 i;
+ u32 usofmask, usof;
+ u32 period;
+
+ maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
+ multi = 1 + ((maxpacket >> 11) & 0x3);
+ maxpacket &= 0x7ff;
+ /* length of the data per uframe */
+ maxpacket = multi * maxpacket;
+
+ numberofusofs = urb->transfer_buffer_length / maxpacket;
+ if (urb->transfer_buffer_length % maxpacket)
+ numberofusofs += 1;
+
+ usofmask = 1;
+ usof = 0;
+ for (i = 0; i < numberofusofs; i++) {
+ usof |= usofmask;
+ usofmask <<= 1;
+ }
+
+ if (urb->dev->speed != USB_SPEED_HIGH) {
+ /* split */
+ ptd->dw5 = __constant_cpu_to_le32(0x1c);
+
+ if (qh->period >= 32)
+ period = qh->period / 2;
+ else
+ period = qh->period;
+
+ } else {
+
+ if (qh->period >= 8)
+ period = qh->period/8;
+ else
+ period = qh->period;
+
+ if (period >= 32)
+ period = 16;
+
+ if (qh->period >= 8) {
+ /* millisecond period */
+ period = (period << 3);
+ } else {
+ /* usof based tranmsfers */
+ /* minimum 4 usofs */
+ usof = 0x11;
+ }
+ }
+
+ ptd->dw2 |= cpu_to_le32(period);
+ ptd->dw4 = cpu_to_le32(usof);
+}
+
+static void transform_into_int(struct isp1760_hcd *priv, struct isp1760_qh *qh,
+ struct isp1760_qtd *qtd, struct urb *urb,
+ u32 payload, struct ptd *ptd)
+{
+ transform_into_atl(priv, qh, qtd, urb, payload, ptd);
+ transform_add_int(priv, qh, qtd, urb, payload, ptd);
+}
+
+static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len,
+ u32 token)
+{
+ int count;
+
+ qtd->data_buffer = databuffer;
+ qtd->packet_type = GET_QTD_TOKEN_TYPE(token);
+ qtd->toggle = GET_DATA_TOGGLE(token);
+
+ if (len > HC_ATL_PL_SIZE)
+ count = HC_ATL_PL_SIZE;
+ else
+ count = len;
+
+ qtd->length = count;
+ return count;
+}
+
+static int check_error(struct ptd *ptd)
+{
+ int error = 0;
+ u32 dw3;
+
+ dw3 = le32_to_cpu(ptd->dw3);
+ if (dw3 & DW3_HALT_BIT)
+ error = -EPIPE;
+
+ if (dw3 & DW3_ERROR_BIT) {
+ printk(KERN_ERR "error bit is set in DW3\n");
+ error = -EPIPE;
+ }
+
+ if (dw3 & DW3_QTD_ACTIVE) {
+ printk(KERN_ERR "transfer active bit is set DW3\n");
+ printk(KERN_ERR "nak counter: %d, rl: %d\n", (dw3 >> 19) & 0xf,
+ (le32_to_cpu(ptd->dw2) >> 25) & 0xf);
+ }
+
+ return error;
+}
+
+static void check_int_err_status(u32 dw4)
+{
+ u32 i;
+
+ dw4 >>= 8;
+
+ for (i = 0; i < 8; i++) {
+ switch (dw4 & 0x7) {
+ case INT_UNDERRUN:
+ printk(KERN_ERR "ERROR: under run , %d\n", i);
+ break;
+
+ case INT_EXACT:
+ printk(KERN_ERR "ERROR: transaction error, %d\n", i);
+ break;
+
+ case INT_BABBLE:
+ printk(KERN_ERR "ERROR: babble error, %d\n", i);
+ break;
+ }
+ dw4 >>= 3;
+ }
+}
+
+static void enqueue_one_qtd(struct isp1760_qtd *qtd, struct isp1760_hcd *priv,
+ u32 payload)
+{
+ u32 token;
+ struct usb_hcd *hcd = priv_to_hcd(priv);
+
+ token = qtd->packet_type;
+
+ if (qtd->length && (qtd->length <= HC_ATL_PL_SIZE)) {
+ switch (token) {
+ case IN_PID:
+ break;
+ case OUT_PID:
+ case SETUP_PID:
+ priv_write_copy(priv, qtd->data_buffer,
+ hcd->regs + payload,
+ qtd->length);
+ }
+ }
+}
+
+static void enqueue_one_atl_qtd(u32 atl_regs, u32 payload,
+ struct isp1760_hcd *priv, struct isp1760_qh *qh,
+ struct urb *urb, u32 slot, struct isp1760_qtd *qtd)
+{
+ struct ptd ptd;
+ struct usb_hcd *hcd = priv_to_hcd(priv);
+
+ transform_into_atl(priv, qh, qtd, urb, payload, &ptd);
+ priv_write_copy(priv, (u32 *)&ptd, hcd->regs + atl_regs, sizeof(ptd));
+ enqueue_one_qtd(qtd, priv, payload);
+
+ priv->atl_ints[slot].urb = urb;
+ priv->atl_ints[slot].qh = qh;
+ priv->atl_ints[slot].qtd = qtd;
+ priv->atl_ints[slot].data_buffer = qtd->data_buffer;
+ priv->atl_ints[slot].payload = payload;
+ qtd->status |= URB_ENQUEUED | URB_TYPE_ATL;
+ qtd->status |= slot << 16;
+}
+
+static void enqueue_one_int_qtd(u32 int_regs, u32 payload,
+ struct isp1760_hcd *priv, struct isp1760_qh *qh,
+ struct urb *urb, u32 slot, struct isp1760_qtd *qtd)
+{
+ struct ptd ptd;
+ struct usb_hcd *hcd = priv_to_hcd(priv);
+
+ transform_into_int(priv, qh, qtd, urb, payload, &ptd);
+ priv_write_copy(priv, (u32 *)&ptd, hcd->regs + int_regs, sizeof(ptd));
+ enqueue_one_qtd(qtd, priv, payload);
+
+ priv->int_ints[slot].urb = urb;
+ priv->int_ints[slot].qh = qh;
+ priv->int_ints[slot].qtd = qtd;
+ priv->int_ints[slot].data_buffer = qtd->data_buffer;
+ priv->int_ints[slot].payload = payload;
+ qtd->status |= URB_ENQUEUED | URB_TYPE_INT;
+ qtd->status |= slot << 16;
+}
+
+void enqueue_an_ATL_packet(struct usb_hcd *hcd, struct isp1760_qh *qh,
+ struct isp1760_qtd *qtd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ u32 skip_map, or_map;
+ u32 queue_entry;
+ u32 slot;
+ u32 atl_regs, payload;
+ u32 buffstatus;
+
+ skip_map = isp1760_readl(hcd->regs + HC_ATL_PTD_SKIPMAP_REG);
+
+ BUG_ON(!skip_map);
+ slot = __ffs(skip_map);
+ queue_entry = 1 << slot;
+
+ atl_regs = ATL_REGS_OFFSET + slot * sizeof(struct ptd);
+
+ payload = alloc_mem(priv, qtd->length);
+
+ enqueue_one_atl_qtd(atl_regs, payload, priv, qh, qtd->urb, slot, qtd);
+
+ or_map = isp1760_readl(hcd->regs + HC_ATL_IRQ_MASK_OR_REG);
+ or_map |= queue_entry;
+ isp1760_writel(or_map, hcd->regs + HC_ATL_IRQ_MASK_OR_REG);
+
+ skip_map &= ~queue_entry;
+ isp1760_writel(skip_map, hcd->regs + HC_ATL_PTD_SKIPMAP_REG);
+
+ buffstatus = isp1760_readl(hcd->regs + HC_BUFFER_STATUS_REG);
+ buffstatus |= ATL_BUFFER;
+ isp1760_writel(buffstatus, hcd->regs + HC_BUFFER_STATUS_REG);
+}
+
+void enqueue_an_INT_packet(struct usb_hcd *hcd, struct isp1760_qh *qh,
+ struct isp1760_qtd *qtd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ u32 skip_map, or_map;
+ u32 queue_entry;
+ u32 slot;
+ u32 int_regs, payload;
+ u32 buffstatus;
+
+ skip_map = isp1760_readl(hcd->regs + HC_INT_PTD_SKIPMAP_REG);
+
+ BUG_ON(!skip_map);
+ slot = __ffs(skip_map);
+ queue_entry = 1 << slot;
+
+ int_regs = INT_REGS_OFFSET + slot * sizeof(struct ptd);
+
+ payload = alloc_mem(priv, qtd->length);
+
+ enqueue_one_int_qtd(int_regs, payload, priv, qh, qtd->urb, slot, qtd);
+
+ or_map = isp1760_readl(hcd->regs + HC_INT_IRQ_MASK_OR_REG);
+ or_map |= queue_entry;
+ isp1760_writel(or_map, hcd->regs + HC_INT_IRQ_MASK_OR_REG);
+
+ skip_map &= ~queue_entry;
+ isp1760_writel(skip_map, hcd->regs + HC_INT_PTD_SKIPMAP_REG);
+
+ buffstatus = isp1760_readl(hcd->regs + HC_BUFFER_STATUS_REG);
+ buffstatus |= INT_BUFFER;
+ isp1760_writel(buffstatus, hcd->regs + HC_BUFFER_STATUS_REG);
+}
+
+static void isp1760_urb_done(struct isp1760_hcd *priv, struct urb *urb, int status)
+__releases(priv->lock)
+__acquires(priv->lock)
+{
+ if (!urb->unlinked) {
+ if (status == -EINPROGRESS)
+ status = 0;
+ }
+
+ /* complete() can reenter this HCD */
+ usb_hcd_unlink_urb_from_ep(priv_to_hcd(priv), urb);
+ spin_unlock(&priv->lock);
+ usb_hcd_giveback_urb(priv_to_hcd(priv), urb, status);
+ spin_lock(&priv->lock);
+}
+
+static void isp1760_qtd_free(struct isp1760_qtd *qtd)
+{
+ kmem_cache_free(qtd_cachep, qtd);
+}
+
+static struct isp1760_qtd *clean_this_qtd(struct isp1760_qtd *qtd)
+{
+ struct isp1760_qtd *tmp_qtd;
+
+ tmp_qtd = qtd->hw_next;
+ list_del(&qtd->qtd_list);
+ isp1760_qtd_free(qtd);
+ return tmp_qtd;
+}
+
+/*
+ * Remove this QTD from the QH list and free its memory. If this QTD
+ * isn't the last one than remove also his successor(s).
+ * Returns the QTD which is part of an new URB and should be enqueued.
+ */
+static struct isp1760_qtd *clean_up_qtdlist(struct isp1760_qtd *qtd)
+{
+ struct isp1760_qtd *tmp_qtd;
+ int last_one;
+
+ do {
+ tmp_qtd = qtd->hw_next;
+ last_one = qtd->status & URB_COMPLETE_NOTIFY;
+ list_del(&qtd->qtd_list);
+ isp1760_qtd_free(qtd);
+ qtd = tmp_qtd;
+ } while (!last_one && qtd);
+
+ return qtd;
+}
+
+static void do_atl_int(struct usb_hcd *usb_hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(usb_hcd);
+ u32 done_map, skip_map;
+ struct ptd ptd;
+ struct urb *urb = NULL;
+ u32 atl_regs_base;
+ u32 atl_regs;
+ u32 queue_entry;
+ u32 payload;
+ u32 length;
+ u32 or_map;
+ u32 status = -EINVAL;
+ int error;
+ struct isp1760_qtd *qtd;
+ struct isp1760_qh *qh;
+ u32 rl;
+ u32 nakcount;
+
+ done_map = isp1760_readl(usb_hcd->regs +
+ HC_ATL_PTD_DONEMAP_REG);
+ skip_map = isp1760_readl(usb_hcd->regs +
+ HC_ATL_PTD_SKIPMAP_REG);
+
+ or_map = isp1760_readl(usb_hcd->regs + HC_ATL_IRQ_MASK_OR_REG);
+ or_map &= ~done_map;
+ isp1760_writel(or_map, usb_hcd->regs + HC_ATL_IRQ_MASK_OR_REG);
+
+ atl_regs_base = ATL_REGS_OFFSET;
+ while (done_map) {
+ u32 dw1;
+ u32 dw2;
+ u32 dw3;
+
+ status = 0;
+
+ queue_entry = __ffs(done_map);
+ done_map &= ~(1 << queue_entry);
+ skip_map |= 1 << queue_entry;
+
+ atl_regs = atl_regs_base + queue_entry * sizeof(struct ptd);
+
+ urb = priv->atl_ints[queue_entry].urb;
+ qtd = priv->atl_ints[queue_entry].qtd;
+ qh = priv->atl_ints[queue_entry].qh;
+ payload = priv->atl_ints[queue_entry].payload;
+
+ if (!qh) {
+ printk(KERN_ERR "qh is 0\n");
+ continue;
+ }
+ priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + atl_regs,
+ atl_regs, sizeof(ptd));
+
+ dw1 = le32_to_cpu(ptd.dw1);
+ dw2 = le32_to_cpu(ptd.dw2);
+ dw3 = le32_to_cpu(ptd.dw3);
+ rl = (dw2 >> 25) & 0x0f;
+ nakcount = (dw3 >> 19) & 0xf;
+
+ /* Transfer Error, *but* active and no HALT -> reload */
+ if ((dw3 & DW3_ERROR_BIT) && (dw3 & DW3_QTD_ACTIVE) &&
+ !(dw3 & DW3_HALT_BIT)) {
+
+ /* according to ppriv code, we have to
+ * reload this one if trasfered bytes != requested bytes
+ * else act like everything went smooth..
+ * XXX This just doesn't feel right and hasn't
+ * triggered so far.
+ */
+
+ length = PTD_XFERRED_LENGTH(dw3);
+ printk(KERN_ERR "Should reload now.... transfered %d "
+ "of %zu\n", length, qtd->length);
+ BUG();
+ }
+
+ if (!nakcount && (dw3 & DW3_QTD_ACTIVE)) {
+ u32 buffstatus;
+
+ /* XXX
+ * NAKs are handled in HW by the chip. Usually if the
+ * device is not able to send data fast enough.
+ * This did not trigger for a long time now.
+ */
+ printk(KERN_ERR "Reloading ptd %p/%p... qh %p readed: "
+ "%d of %d done: %08x cur: %08x\n", qtd,
+ urb, qh, PTD_XFERRED_LENGTH(dw3),
+ qtd->length, done_map,
+ (1 << queue_entry));
+
+ /* RL counter = ERR counter */
+ dw3 &= ~(0xf << 19);
+ dw3 |= rl << 19;
+ dw3 &= ~(3 << (55 - 32));
+ dw3 |= ERR_COUNTER << (55 - 32);
+
+ /*
+ * It is not needed to write skip map back because it
+ * is unchanged. Just make sure that this entry is
+ * unskipped once it gets written to the HW.
+ */
+ skip_map &= ~(1 << queue_entry);
+ or_map = isp1760_readl(usb_hcd->regs +
+ HC_ATL_IRQ_MASK_OR_REG);
+ or_map |= 1 << queue_entry;
+ isp1760_writel(or_map, usb_hcd->regs +
+ HC_ATL_IRQ_MASK_OR_REG);
+
+ ptd.dw3 = cpu_to_le32(dw3);
+ priv_write_copy(priv, (u32 *)&ptd, usb_hcd->regs +
+ atl_regs, sizeof(ptd));
+
+ ptd.dw0 |= __constant_cpu_to_le32(PTD_VALID);
+ priv_write_copy(priv, (u32 *)&ptd, usb_hcd->regs +
+ atl_regs, sizeof(ptd));
+
+ buffstatus = isp1760_readl(usb_hcd->regs +
+ HC_BUFFER_STATUS_REG);
+ buffstatus |= ATL_BUFFER;
+ isp1760_writel(buffstatus, usb_hcd->regs +
+ HC_BUFFER_STATUS_REG);
+ continue;
+ }
+
+ error = check_error(&ptd);
+ if (error) {
+ status = error;
+ priv->atl_ints[queue_entry].qh->toggle = 0;
+ priv->atl_ints[queue_entry].qh->ping = 0;
+ urb->status = -EPIPE;
+
+#if 0
+ printk(KERN_ERR "Error in %s().\n", __func__);
+ printk(KERN_ERR "IN dw0: %08x dw1: %08x dw2: %08x "
+ "dw3: %08x dw4: %08x dw5: %08x dw6: "
+ "%08x dw7: %08x\n",
+ ptd.dw0, ptd.dw1, ptd.dw2, ptd.dw3,
+ ptd.dw4, ptd.dw5, ptd.dw6, ptd.dw7);
+#endif
+ } else {
+ if (usb_pipetype(urb->pipe) == PIPE_BULK) {
+ priv->atl_ints[queue_entry].qh->toggle = dw3 &
+ (1 << 25);
+ priv->atl_ints[queue_entry].qh->ping = dw3 &
+ (1 << 26);
+ }
+ }
+
+ length = PTD_XFERRED_LENGTH(dw3);
+ if (length) {
+ switch (DW1_GET_PID(dw1)) {
+ case IN_PID:
+ priv_read_copy(priv,
+ priv->atl_ints[queue_entry].data_buffer,
+ usb_hcd->regs + payload, payload,
+ length);
+
+ case OUT_PID:
+
+ urb->actual_length += length;
+
+ case SETUP_PID:
+ break;
+ }
+ }
+
+ priv->atl_ints[queue_entry].data_buffer = NULL;
+ priv->atl_ints[queue_entry].urb = NULL;
+ priv->atl_ints[queue_entry].qtd = NULL;
+ priv->atl_ints[queue_entry].qh = NULL;
+
+ free_mem(priv, payload);
+
+ isp1760_writel(skip_map, usb_hcd->regs +
+ HC_ATL_PTD_SKIPMAP_REG);
+
+ if (urb->status == -EPIPE) {
+ /* HALT was received */
+
+ qtd = clean_up_qtdlist(qtd);
+ isp1760_urb_done(priv, urb, urb->status);
+
+ } else if (usb_pipebulk(urb->pipe) && (length < qtd->length)) {
+ /* short BULK received */
+
+ printk(KERN_ERR "short bulk, %d instead %d\n", length,
+ qtd->length);
+ if (urb->transfer_flags & URB_SHORT_NOT_OK) {
+ urb->status = -EREMOTEIO;
+ printk(KERN_ERR "not okey\n");
+ }
+
+ if (urb->status == -EINPROGRESS)
+ urb->status = 0;
+
+ qtd = clean_up_qtdlist(qtd);
+
+ isp1760_urb_done(priv, urb, urb->status);
+
+ } else if (qtd->status & URB_COMPLETE_NOTIFY) {
+ /* that was the last qtd of that URB */
+
+ if (urb->status == -EINPROGRESS)
+ urb->status = 0;
+
+ qtd = clean_this_qtd(qtd);
+ isp1760_urb_done(priv, urb, urb->status);
+
+ } else {
+ /* next QTD of this URB */
+
+ qtd = clean_this_qtd(qtd);
+ BUG_ON(!qtd);
+ }
+
+ if (qtd)
+ enqueue_an_ATL_packet(usb_hcd, qh, qtd);
+
+ skip_map = isp1760_readl(usb_hcd->regs +
+ HC_ATL_PTD_SKIPMAP_REG);
+ }
+}
+
+static void do_intl_int(struct usb_hcd *usb_hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(usb_hcd);
+ u32 done_map, skip_map;
+ struct ptd ptd;
+ struct urb *urb = NULL;
+ u32 int_regs;
+ u32 int_regs_base;
+ u32 payload;
+ u32 length;
+ u32 or_map;
+ int error;
+ u32 queue_entry;
+ struct isp1760_qtd *qtd;
+ struct isp1760_qh *qh;
+
+ done_map = isp1760_readl(usb_hcd->regs +
+ HC_INT_PTD_DONEMAP_REG);
+ skip_map = isp1760_readl(usb_hcd->regs +
+ HC_INT_PTD_SKIPMAP_REG);
+
+ or_map = isp1760_readl(usb_hcd->regs + HC_INT_IRQ_MASK_OR_REG);
+ or_map &= ~done_map;
+ isp1760_writel(or_map, usb_hcd->regs + HC_INT_IRQ_MASK_OR_REG);
+
+ int_regs_base = INT_REGS_OFFSET;
+
+ while (done_map) {
+ u32 dw1;
+ u32 dw3;
+
+ queue_entry = __ffs(done_map);
+ done_map &= ~(1 << queue_entry);
+ skip_map |= 1 << queue_entry;
+
+ int_regs = int_regs_base + queue_entry * sizeof(struct ptd);
+ urb = priv->int_ints[queue_entry].urb;
+ qtd = priv->int_ints[queue_entry].qtd;
+ qh = priv->int_ints[queue_entry].qh;
+ payload = priv->int_ints[queue_entry].payload;
+
+ if (!qh) {
+ printk(KERN_ERR "(INT) qh is 0\n");
+ continue;
+ }
+
+ priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + int_regs,
+ int_regs, sizeof(ptd));
+ dw1 = le32_to_cpu(ptd.dw1);
+ dw3 = le32_to_cpu(ptd.dw3);
+ check_int_err_status(le32_to_cpu(ptd.dw4));
+
+ error = check_error(&ptd);
+ if (error) {
+#if 0
+ printk(KERN_ERR "Error in %s().\n", __func__);
+ printk(KERN_ERR "IN dw0: %08x dw1: %08x dw2: %08x "
+ "dw3: %08x dw4: %08x dw5: %08x dw6: "
+ "%08x dw7: %08x\n",
+ ptd.dw0, ptd.dw1, ptd.dw2, ptd.dw3,
+ ptd.dw4, ptd.dw5, ptd.dw6, ptd.dw7);
+#endif
+ urb->status = -EPIPE;
+ priv->int_ints[queue_entry].qh->toggle = 0;
+ priv->int_ints[queue_entry].qh->ping = 0;
+
+ } else {
+ priv->int_ints[queue_entry].qh->toggle =
+ dw3 & (1 << 25);
+ priv->int_ints[queue_entry].qh->ping = dw3 & (1 << 26);
+ }
+
+ if (urb->dev->speed != USB_SPEED_HIGH)
+ length = PTD_XFERRED_LENGTH_LO(dw3);
+ else
+ length = PTD_XFERRED_LENGTH(dw3);
+
+ if (length) {
+ switch (DW1_GET_PID(dw1)) {
+ case IN_PID:
+ priv_read_copy(priv,
+ priv->int_ints[queue_entry].data_buffer,
+ usb_hcd->regs + payload , payload,
+ length);
+ case OUT_PID:
+
+ urb->actual_length += length;
+
+ case SETUP_PID:
+ break;
+ }
+ }
+
+ priv->int_ints[queue_entry].data_buffer = NULL;
+ priv->int_ints[queue_entry].urb = NULL;
+ priv->int_ints[queue_entry].qtd = NULL;
+ priv->int_ints[queue_entry].qh = NULL;
+
+ isp1760_writel(skip_map, usb_hcd->regs +
+ HC_INT_PTD_SKIPMAP_REG);
+ free_mem(priv, payload);
+
+ if (urb->status == -EPIPE) {
+ /* HALT received */
+
+ qtd = clean_up_qtdlist(qtd);
+ isp1760_urb_done(priv, urb, urb->status);
+
+ } else if (qtd->status & URB_COMPLETE_NOTIFY) {
+
+ if (urb->status == -EINPROGRESS)
+ urb->status = 0;
+
+ qtd = clean_this_qtd(qtd);
+ isp1760_urb_done(priv, urb, urb->status);
+
+ } else {
+ /* next QTD of this URB */
+
+ qtd = clean_this_qtd(qtd);
+ BUG_ON(!qtd);
+ }
+
+ if (qtd)
+ enqueue_an_INT_packet(usb_hcd, qh, qtd);
+
+ skip_map = isp1760_readl(usb_hcd->regs +
+ HC_INT_PTD_SKIPMAP_REG);
+ }
+}
+
+#define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
+static struct isp1760_qh *qh_make(struct isp1760_hcd *priv, struct urb *urb,
+ gfp_t flags)
+{
+ struct isp1760_qh *qh;
+ int is_input, type;
+
+ qh = isp1760_qh_alloc(priv, flags);
+ if (!qh)
+ return qh;
+
+ /*
+ * init endpoint/device data for this QH
+ */
+ is_input = usb_pipein(urb->pipe);
+ type = usb_pipetype(urb->pipe);
+
+ if (type == PIPE_INTERRUPT) {
+
+ if (urb->dev->speed == USB_SPEED_HIGH) {
+
+ qh->period = urb->interval >> 3;
+ if (qh->period == 0 && urb->interval != 1) {
+ /* NOTE interval 2 or 4 uframes could work.
+ * But interval 1 scheduling is simpler, and
+ * includes high bandwidth.
+ */
+ printk(KERN_ERR "intr period %d uframes, NYET!",
+ urb->interval);
+ qh_destroy(qh);
+ return NULL;
+ }
+ } else {
+ qh->period = urb->interval;
+ }
+ }
+
+ /* support for tt scheduling, and access to toggles */
+ qh->dev = urb->dev;
+
+ if (!usb_pipecontrol(urb->pipe))
+ usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), !is_input,
+ 1);
+ return qh;
+}
+
+/*
+ * For control/bulk/interrupt, return QH with these TDs appended.
+ * Allocates and initializes the QH if necessary.
+ * Returns null if it can't allocate a QH it needs to.
+ * If the QH has TDs (urbs) already, that's great.
+ */
+static struct isp1760_qh *qh_append_tds(struct isp1760_hcd *priv,
+ struct urb *urb, struct list_head *qtd_list, int epnum,
+ void **ptr)
+{
+ struct isp1760_qh *qh;
+ struct isp1760_qtd *qtd;
+ struct isp1760_qtd *prev_qtd;
+
+ qh = (struct isp1760_qh *)*ptr;
+ if (!qh) {
+ /* can't sleep here, we have priv->lock... */
+ qh = qh_make(priv, urb, GFP_ATOMIC);
+ if (!qh)
+ return qh;
+ *ptr = qh;
+ }
+
+ qtd = list_entry(qtd_list->next, struct isp1760_qtd,
+ qtd_list);
+ if (!list_empty(&qh->qtd_list))
+ prev_qtd = list_entry(qh->qtd_list.prev,
+ struct isp1760_qtd, qtd_list);
+ else
+ prev_qtd = NULL;
+
+ list_splice(qtd_list, qh->qtd_list.prev);
+ if (prev_qtd) {
+ BUG_ON(prev_qtd->hw_next);
+ prev_qtd->hw_next = qtd;
+ }
+
+ urb->hcpriv = qh;
+ return qh;
+}
+
+static void qtd_list_free(struct isp1760_hcd *priv, struct urb *urb,
+ struct list_head *qtd_list)
+{
+ struct list_head *entry, *temp;
+
+ list_for_each_safe(entry, temp, qtd_list) {
+ struct isp1760_qtd *qtd;
+
+ qtd = list_entry(entry, struct isp1760_qtd, qtd_list);
+ list_del(&qtd->qtd_list);
+ isp1760_qtd_free(qtd);
+ }
+}
+
+static int isp1760_prepare_enqueue(struct isp1760_hcd *priv, struct urb *urb,
+ struct list_head *qtd_list, gfp_t mem_flags, packet_enqueue *p)
+{
+ struct isp1760_qtd *qtd;
+ int epnum;
+ unsigned long flags;
+ struct isp1760_qh *qh = NULL;
+ int rc;
+ int qh_busy;
+
+ qtd = list_entry(qtd_list->next, struct isp1760_qtd, qtd_list);
+ epnum = urb->ep->desc.bEndpointAddress;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &priv_to_hcd(priv)->flags)) {
+ rc = -ESHUTDOWN;
+ goto done;
+ }
+ rc = usb_hcd_link_urb_to_ep(priv_to_hcd(priv), urb);
+ if (rc)
+ goto done;
+
+ qh = urb->ep->hcpriv;
+ if (qh)
+ qh_busy = !list_empty(&qh->qtd_list);
+ else
+ qh_busy = 0;
+
+ qh = qh_append_tds(priv, urb, qtd_list, epnum, &urb->ep->hcpriv);
+ if (!qh) {
+ usb_hcd_unlink_urb_from_ep(priv_to_hcd(priv), urb);
+ rc = -ENOMEM;
+ goto done;
+ }
+
+ if (!qh_busy)
+ p(priv_to_hcd(priv), qh, qtd);
+
+done:
+ spin_unlock_irqrestore(&priv->lock, flags);
+ if (!qh)
+ qtd_list_free(priv, urb, qtd_list);
+ return rc;
+}
+
+static struct isp1760_qtd *isp1760_qtd_alloc(struct isp1760_hcd *priv,
+ gfp_t flags)
+{
+ struct isp1760_qtd *qtd;
+
+ qtd = kmem_cache_zalloc(qtd_cachep, flags);
+ if (qtd)
+ INIT_LIST_HEAD(&qtd->qtd_list);
+
+ return qtd;
+}
+
+/*
+ * create a list of filled qtds for this URB; won't link into qh.
+ */
+static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv,
+ struct urb *urb, struct list_head *head, gfp_t flags)
+{
+ struct isp1760_qtd *qtd, *qtd_prev;
+ void *buf;
+ int len, maxpacket;
+ int is_input;
+ u32 token;
+
+ /*
+ * URBs map to sequences of QTDs: one logical transaction
+ */
+ qtd = isp1760_qtd_alloc(priv, flags);
+ if (!qtd)
+ return NULL;
+
+ list_add_tail(&qtd->qtd_list, head);
+ qtd->urb = urb;
+ urb->status = -EINPROGRESS;
+
+ token = 0;
+ /* for split transactions, SplitXState initialized to zero */
+
+ len = urb->transfer_buffer_length;
+ is_input = usb_pipein(urb->pipe);
+ if (usb_pipecontrol(urb->pipe)) {
+ /* SETUP pid */
+ qtd_fill(qtd, urb->setup_packet,
+ sizeof(struct usb_ctrlrequest),
+ token | SETUP_PID);
+
+ /* ... and always at least one more pid */
+ token ^= DATA_TOGGLE;
+ qtd_prev = qtd;
+ qtd = isp1760_qtd_alloc(priv, flags);
+ if (!qtd)
+ goto cleanup;
+ qtd->urb = urb;
+ qtd_prev->hw_next = qtd;
+ list_add_tail(&qtd->qtd_list, head);
+
+ /* for zero length DATA stages, STATUS is always IN */
+ if (len == 0)
+ token |= IN_PID;
+ }
+
+ /*
+ * data transfer stage: buffer setup
+ */
+ buf = urb->transfer_buffer;
+
+ if (is_input)
+ token |= IN_PID;
+ else
+ token |= OUT_PID;
+
+ maxpacket = max_packet(usb_maxpacket(urb->dev, urb->pipe, !is_input));
+
+ /*
+ * buffer gets wrapped in one or more qtds;
+ * last one may be "short" (including zero len)
+ * and may serve as a control status ack
+ */
+ for (;;) {
+ int this_qtd_len;
+
+ if (!buf && len) {
+ /* XXX This looks like usb storage / SCSI bug */
+ printk(KERN_ERR "buf is null, dma is %08lx len is %d\n",
+ (long unsigned)urb->transfer_dma, len);
+ WARN_ON(1);
+ }
+
+ this_qtd_len = qtd_fill(qtd, buf, len, token);
+ len -= this_qtd_len;
+ buf += this_qtd_len;
+
+ /* qh makes control packets use qtd toggle; maybe switch it */
+ if ((maxpacket & (this_qtd_len + (maxpacket - 1))) == 0)
+ token ^= DATA_TOGGLE;
+
+ if (len <= 0)
+ break;
+
+ qtd_prev = qtd;
+ qtd = isp1760_qtd_alloc(priv, flags);
+ if (!qtd)
+ goto cleanup;
+ qtd->urb = urb;
+ qtd_prev->hw_next = qtd;
+ list_add_tail(&qtd->qtd_list, head);
+ }
+
+ /*
+ * control requests may need a terminating data "status" ack;
+ * bulk ones may need a terminating short packet (zero length).
+ */
+ if (urb->transfer_buffer_length != 0) {
+ int one_more = 0;
+
+ if (usb_pipecontrol(urb->pipe)) {
+ one_more = 1;
+ /* "in" <--> "out" */
+ token ^= IN_PID;
+ /* force DATA1 */
+ token |= DATA_TOGGLE;
+ } else if (usb_pipebulk(urb->pipe)
+ && (urb->transfer_flags & URB_ZERO_PACKET)
+ && !(urb->transfer_buffer_length % maxpacket)) {
+ one_more = 1;
+ }
+ if (one_more) {
+ qtd_prev = qtd;
+ qtd = isp1760_qtd_alloc(priv, flags);
+ if (!qtd)
+ goto cleanup;
+ qtd->urb = urb;
+ qtd_prev->hw_next = qtd;
+ list_add_tail(&qtd->qtd_list, head);
+
+ /* never any data in such packets */
+ qtd_fill(qtd, NULL, 0, token);
+ }
+ }
+
+ qtd->status = URB_COMPLETE_NOTIFY;
+ return head;
+
+cleanup:
+ qtd_list_free(priv, urb, head);
+ return NULL;
+}
+
+static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ struct list_head qtd_list;
+ packet_enqueue *pe;
+
+ INIT_LIST_HEAD(&qtd_list);
+
+ switch (usb_pipetype(urb->pipe)) {
+ case PIPE_CONTROL:
+ case PIPE_BULK:
+
+ if (!qh_urb_transaction(priv, urb, &qtd_list, mem_flags))
+ return -ENOMEM;
+ pe = enqueue_an_ATL_packet;
+ break;
+
+ case PIPE_INTERRUPT:
+ if (!qh_urb_transaction(priv, urb, &qtd_list, mem_flags))
+ return -ENOMEM;
+ pe = enqueue_an_INT_packet;
+ break;
+
+ case PIPE_ISOCHRONOUS:
+ printk(KERN_ERR "PIPE_ISOCHRONOUS ain't supported\n");
+ default:
+ return -EPIPE;
+ }
+
+ isp1760_prepare_enqueue(priv, urb, &qtd_list, mem_flags, pe);
+ return 0;
+}
+
+static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
+ int status)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ struct inter_packet_info *ints;
+ u32 i;
+ u32 reg_base, or_reg, skip_reg;
+ int flags;
+ struct ptd ptd;
+
+ switch (usb_pipetype(urb->pipe)) {
+ case PIPE_ISOCHRONOUS:
+ return -EPIPE;
+ break;
+
+ case PIPE_INTERRUPT:
+ ints = priv->int_ints;
+ reg_base = INT_REGS_OFFSET;
+ or_reg = HC_INT_IRQ_MASK_OR_REG;
+ skip_reg = HC_INT_PTD_SKIPMAP_REG;
+ break;
+
+ default:
+ ints = priv->atl_ints;
+ reg_base = ATL_REGS_OFFSET;
+ or_reg = HC_ATL_IRQ_MASK_OR_REG;
+ skip_reg = HC_ATL_PTD_SKIPMAP_REG;
+ break;
+ }
+
+ memset(&ptd, 0, sizeof(ptd));
+ spin_lock_irqsave(&priv->lock, flags);
+
+ for (i = 0; i < 32; i++) {
+ if (ints->urb == urb) {
+ u32 skip_map;
+ u32 or_map;
+ struct isp1760_qtd *qtd;
+
+ skip_map = isp1760_readl(hcd->regs + skip_reg);
+ skip_map |= 1 << i;
+ isp1760_writel(skip_map, hcd->regs + skip_reg);
+
+ or_map = isp1760_readl(hcd->regs + or_reg);
+ or_map &= ~(1 << i);
+ isp1760_writel(or_map, hcd->regs + or_reg);
+
+ priv_write_copy(priv, (u32 *)&ptd, hcd->regs + reg_base
+ + i * sizeof(ptd), sizeof(ptd));
+ qtd = ints->qtd;
+
+ clean_up_qtdlist(qtd);
+
+ free_mem(priv, ints->payload);
+
+ ints->urb = NULL;
+ ints->qh = NULL;
+ ints->qtd = NULL;
+ ints->data_buffer = NULL;
+ ints->payload = 0;
+
+ isp1760_urb_done(priv, urb, status);
+ break;
+ }
+ ints++;
+ }
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return 0;
+}
+
+static irqreturn_t isp1760_irq(struct usb_hcd *usb_hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(usb_hcd);
+ u32 imask;
+ irqreturn_t irqret = IRQ_NONE;
+
+ spin_lock(&priv->lock);
+
+ if (!(usb_hcd->state & HC_STATE_RUNNING))
+ goto leave;
+
+ imask = isp1760_readl(usb_hcd->regs + HC_INTERRUPT_REG);
+ if (unlikely(!imask))
+ goto leave;
+
+ isp1760_writel(imask, usb_hcd->regs + HC_INTERRUPT_REG);
+ if (imask & HC_ATL_INT)
+ do_atl_int(usb_hcd);
+
+ if (imask & HC_INTL_INT)
+ do_intl_int(usb_hcd);
+
+ irqret = IRQ_HANDLED;
+leave:
+ spin_unlock(&priv->lock);
+ return irqret;
+}
+
+static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ u32 temp, status = 0;
+ u32 mask;
+ int retval = 1;
+ unsigned long flags;
+
+ /* if !USB_SUSPEND, root hub timers won't get shut down ... */
+ if (!HC_IS_RUNNING(hcd->state))
+ return 0;
+
+ /* init status to no-changes */
+ buf[0] = 0;
+ mask = PORT_CSC;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ temp = isp1760_readl(hcd->regs + HC_PORTSC1);
+
+ if (temp & PORT_OWNER) {
+ if (temp & PORT_CSC) {
+ temp &= ~PORT_CSC;
+ isp1760_writel(temp, hcd->regs + HC_PORTSC1);
+ goto done;
+ }
+ }
+
+ /*
+ * Return status information even for ports with OWNER set.
+ * Otherwise khubd wouldn't see the disconnect event when a
+ * high-speed device is switched over to the companion
+ * controller by the user.
+ */
+
+ if ((temp & mask) != 0
+ || ((temp & PORT_RESUME) != 0
+ && time_after_eq(jiffies,
+ priv->reset_done))) {
+ buf [0] |= 1 << (0 + 1);
+ status = STS_PCD;
+ }
+ /* FIXME autosuspend idle root hubs */
+done:
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return status ? retval : 0;
+}
+
+static void isp1760_hub_descriptor(struct isp1760_hcd *priv,
+ struct usb_hub_descriptor *desc)
+{
+ int ports = HCS_N_PORTS(priv->hcs_params);
+ u16 temp;
+
+ desc->bDescriptorType = 0x29;
+ /* priv 1.0, 2.3.9 says 20ms max */
+ desc->bPwrOn2PwrGood = 10;
+ desc->bHubContrCurrent = 0;
+
+ desc->bNbrPorts = ports;
+ temp = 1 + (ports / 8);
+ desc->bDescLength = 7 + 2 * temp;
+
+ /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */
+ memset(&desc->bitmap[0], 0, temp);
+ memset(&desc->bitmap[temp], 0xff, temp);
+
+ /* per-port overcurrent reporting */
+ temp = 0x0008;
+ if (HCS_PPC(priv->hcs_params))
+ /* per-port power control */
+ temp |= 0x0001;
+ else
+ /* no power switching */
+ temp |= 0x0002;
+ desc->wHubCharacteristics = cpu_to_le16(temp);
+}
+
+#define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
+
+static int check_reset_complete(struct isp1760_hcd *priv, int index,
+ u32 __iomem *status_reg, int port_status)
+{
+ if (!(port_status & PORT_CONNECT))
+ return port_status;
+
+ /* if reset finished and it's still not enabled -- handoff */
+ if (!(port_status & PORT_PE)) {
+
+ printk(KERN_ERR "port %d full speed --> companion\n",
+ index + 1);
+
+ port_status |= PORT_OWNER;
+ port_status &= ~PORT_RWC_BITS;
+ isp1760_writel(port_status, status_reg);
+
+ } else
+ printk(KERN_ERR "port %d high speed\n", index + 1);
+
+ return port_status;
+}
+
+static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
+ u16 wValue, u16 wIndex, char *buf, u16 wLength)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ int ports = HCS_N_PORTS(priv->hcs_params);
+ u32 __iomem *status_reg = hcd->regs + HC_PORTSC1;
+ u32 temp, status;
+ unsigned long flags;
+ int retval = 0;
+ unsigned selector;
+
+ /*
+ * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR.
+ * HCS_INDICATOR may say we can change LEDs to off/amber/green.
+ * (track current state ourselves) ... blink for diagnostics,
+ * power, "this is the one", etc. EHCI spec supports this.
+ */
+
+ spin_lock_irqsave(&priv->lock, flags);
+ switch (typeReq) {
+ case ClearHubFeature:
+ switch (wValue) {
+ case C_HUB_LOCAL_POWER:
+ case C_HUB_OVER_CURRENT:
+ /* no hub-wide feature/status flags */
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case ClearPortFeature:
+ if (!wIndex || wIndex > ports)
+ goto error;
+ wIndex--;
+ temp = isp1760_readl(status_reg);
+
+ /*
+ * Even if OWNER is set, so the port is owned by the
+ * companion controller, khubd needs to be able to clear
+ * the port-change status bits (especially
+ * USB_PORT_FEAT_C_CONNECTION).
+ */
+
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ isp1760_writel(temp & ~PORT_PE, status_reg);
+ break;
+ case USB_PORT_FEAT_C_ENABLE:
+ /* XXX error? */
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ if (temp & PORT_RESET)
+ goto error;
+
+ if (temp & PORT_SUSPEND) {
+ if ((temp & PORT_PE) == 0)
+ goto error;
+ /* resume signaling for 20 msec */
+ temp &= ~(PORT_RWC_BITS);
+ isp1760_writel(temp | PORT_RESUME,
+ status_reg);
+ priv->reset_done = jiffies +
+ msecs_to_jiffies(20);
+ }
+ break;
+ case USB_PORT_FEAT_C_SUSPEND:
+ /* we auto-clear this feature */
+ break;
+ case USB_PORT_FEAT_POWER:
+ if (HCS_PPC(priv->hcs_params))
+ isp1760_writel(temp & ~PORT_POWER, status_reg);
+ break;
+ case USB_PORT_FEAT_C_CONNECTION:
+ isp1760_writel(temp | PORT_CSC,
+ status_reg);
+ break;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ /* XXX error ?*/
+ break;
+ case USB_PORT_FEAT_C_RESET:
+ /* GetPortStatus clears reset */
+ break;
+ default:
+ goto error;
+ }
+ isp1760_readl(hcd->regs + HC_USBCMD);
+ break;
+ case GetHubDescriptor:
+ isp1760_hub_descriptor(priv, (struct usb_hub_descriptor *)
+ buf);
+ break;
+ case GetHubStatus:
+ /* no hub-wide feature/status flags */
+ memset(buf, 0, 4);
+ break;
+ case GetPortStatus:
+ if (!wIndex || wIndex > ports)
+ goto error;
+ wIndex--;
+ status = 0;
+ temp = isp1760_readl(status_reg);
+
+ /* wPortChange bits */
+ if (temp & PORT_CSC)
+ status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+
+
+ /* whoever resumes must GetPortStatus to complete it!! */
+ if (temp & PORT_RESUME) {
+ printk(KERN_ERR "Port resume should be skipped.\n");
+
+ /* Remote Wakeup received? */
+ if (!priv->reset_done) {
+ /* resume signaling for 20 msec */
+ priv->reset_done = jiffies
+ + msecs_to_jiffies(20);
+ /* check the port again */
+ mod_timer(&priv_to_hcd(priv)->rh_timer,
+ priv->reset_done);
+ }
+
+ /* resume completed? */
+ else if (time_after_eq(jiffies,
+ priv->reset_done)) {
+ status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+ priv->reset_done = 0;
+
+ /* stop resume signaling */
+ temp = isp1760_readl(status_reg);
+ isp1760_writel(
+ temp & ~(PORT_RWC_BITS | PORT_RESUME),
+ status_reg);
+ retval = handshake(priv, status_reg,
+ PORT_RESUME, 0, 2000 /* 2msec */);
+ if (retval != 0) {
+ isp1760_err(priv,
+ "port %d resume error %d\n",
+ wIndex + 1, retval);
+ goto error;
+ }
+ temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
+ }
+ }
+
+ /* whoever resets must GetPortStatus to complete it!! */
+ if ((temp & PORT_RESET)
+ && time_after_eq(jiffies,
+ priv->reset_done)) {
+ status |= 1 << USB_PORT_FEAT_C_RESET;
+ priv->reset_done = 0;
+
+ /* force reset to complete */
+ isp1760_writel(temp & ~PORT_RESET,
+ status_reg);
+ /* REVISIT: some hardware needs 550+ usec to clear
+ * this bit; seems too long to spin routinely...
+ */
+ retval = handshake(priv, status_reg,
+ PORT_RESET, 0, 750);
+ if (retval != 0) {
+ isp1760_err(priv, "port %d reset error %d\n",
+ wIndex + 1, retval);
+ goto error;
+ }
+
+ /* see what we found out */
+ temp = check_reset_complete(priv, wIndex, status_reg,
+ isp1760_readl(status_reg));
+ }
+ /*
+ * Even if OWNER is set, there's no harm letting khubd
+ * see the wPortStatus values (they should all be 0 except
+ * for PORT_POWER anyway).
+ */
+
+ if (temp & PORT_OWNER)
+ printk(KERN_ERR "Warning: PORT_OWNER is set\n");
+
+ if (temp & PORT_CONNECT) {
+ status |= 1 << USB_PORT_FEAT_CONNECTION;
+ /* status may be from integrated TT */
+ status |= ehci_port_speed(priv, temp);
+ }
+ if (temp & PORT_PE)
+ status |= 1 << USB_PORT_FEAT_ENABLE;
+ if (temp & (PORT_SUSPEND|PORT_RESUME))
+ status |= 1 << USB_PORT_FEAT_SUSPEND;
+ if (temp & PORT_RESET)
+ status |= 1 << USB_PORT_FEAT_RESET;
+ if (temp & PORT_POWER)
+ status |= 1 << USB_PORT_FEAT_POWER;
+
+ put_unaligned(cpu_to_le32(status), (__le32 *) buf);
+ break;
+ case SetHubFeature:
+ switch (wValue) {
+ case C_HUB_LOCAL_POWER:
+ case C_HUB_OVER_CURRENT:
+ /* no hub-wide feature/status flags */
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case SetPortFeature:
+ selector = wIndex >> 8;
+ wIndex &= 0xff;
+ if (!wIndex || wIndex > ports)
+ goto error;
+ wIndex--;
+ temp = isp1760_readl(status_reg);
+ if (temp & PORT_OWNER)
+ break;
+
+/* temp &= ~PORT_RWC_BITS; */
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ isp1760_writel(temp | PORT_PE, status_reg);
+ break;
+
+ case USB_PORT_FEAT_SUSPEND:
+ if ((temp & PORT_PE) == 0
+ || (temp & PORT_RESET) != 0)
+ goto error;
+
+ isp1760_writel(temp | PORT_SUSPEND, status_reg);
+ break;
+ case USB_PORT_FEAT_POWER:
+ if (HCS_PPC(priv->hcs_params))
+ isp1760_writel(temp | PORT_POWER,
+ status_reg);
+ break;
+ case USB_PORT_FEAT_RESET:
+ if (temp & PORT_RESUME)
+ goto error;
+ /* line status bits may report this as low speed,
+ * which can be fine if this root hub has a
+ * transaction translator built in.
+ */
+ if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
+ && PORT_USB11(temp)) {
+ temp |= PORT_OWNER;
+ } else {
+ temp |= PORT_RESET;
+ temp &= ~PORT_PE;
+
+ /*
+ * caller must wait, then call GetPortStatus
+ * usb 2.0 spec says 50 ms resets on root
+ */
+ priv->reset_done = jiffies +
+ msecs_to_jiffies(50);
+ }
+ isp1760_writel(temp, status_reg);
+ break;
+ default:
+ goto error;
+ }
+ isp1760_readl(hcd->regs + HC_USBCMD);
+ break;
+
+ default:
+error:
+ /* "stall" on error */
+ retval = -EPIPE;
+ }
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return retval;
+}
+
+static void isp1760_endpoint_disable(struct usb_hcd *usb_hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(usb_hcd);
+ struct isp1760_qh *qh;
+ struct isp1760_qtd *qtd;
+ u32 flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ qh = ep->hcpriv;
+ if (!qh)
+ goto out;
+
+ ep->hcpriv = NULL;
+ do {
+ /* more than entry might get removed */
+ if (list_empty(&qh->qtd_list))
+ break;
+
+ qtd = list_first_entry(&qh->qtd_list, struct isp1760_qtd,
+ qtd_list);
+
+ if (qtd->status & URB_ENQUEUED) {
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+ isp1760_urb_dequeue(usb_hcd, qtd->urb, -ECONNRESET);
+ spin_lock_irqsave(&priv->lock, flags);
+ } else {
+ struct urb *urb;
+
+ urb = qtd->urb;
+ clean_up_qtdlist(qtd);
+ isp1760_urb_done(priv, urb, -ECONNRESET);
+ }
+ } while (1);
+
+ qh_destroy(qh);
+ /* remove requests and leak them.
+ * ATL are pretty fast done, INT could take a while...
+ * The latter shoule be removed
+ */
+out:
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int isp1760_get_frame(struct usb_hcd *hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ u32 fr;
+
+ fr = isp1760_readl(hcd->regs + HC_FRINDEX);
+ return (fr >> 3) % priv->periodic_size;
+}
+
+static void isp1760_stop(struct usb_hcd *hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+ isp1760_hub_control(hcd, ClearPortFeature, USB_PORT_FEAT_POWER, 1,
+ NULL, 0);
+ mdelay(20);
+
+ spin_lock_irq(&priv->lock);
+ ehci_reset(priv);
+ /* Disable IRQ */
+ isp1760_writel(HW_DATA_BUS_32BIT, hcd->regs + HC_HW_MODE_CTRL);
+ spin_unlock_irq(&priv->lock);
+
+ isp1760_writel(0, hcd->regs + HC_CONFIGFLAG);
+}
+
+static void isp1760_shutdown(struct usb_hcd *hcd)
+{
+ u32 command;
+
+ isp1760_stop(hcd);
+ isp1760_writel(HW_DATA_BUS_32BIT, hcd->regs + HC_HW_MODE_CTRL);
+
+ command = isp1760_readl(hcd->regs + HC_USBCMD);
+ command &= ~CMD_RUN;
+ isp1760_writel(command, hcd->regs + HC_USBCMD);
+}
+
+static const struct hc_driver isp1760_hc_driver = {
+ .description = "isp1760-hcd",
+ .product_desc = "NXP ISP1760 USB Host Controller",
+ .hcd_priv_size = sizeof(struct isp1760_hcd),
+ .irq = isp1760_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+ .reset = isp1760_hc_setup,
+ .start = isp1760_run,
+ .stop = isp1760_stop,
+ .shutdown = isp1760_shutdown,
+ .urb_enqueue = isp1760_urb_enqueue,
+ .urb_dequeue = isp1760_urb_dequeue,
+ .endpoint_disable = isp1760_endpoint_disable,
+ .get_frame_number = isp1760_get_frame,
+ .hub_status_data = isp1760_hub_status_data,
+ .hub_control = isp1760_hub_control,
+};
+
+int __init init_kmem_once(void)
+{
+ qtd_cachep = kmem_cache_create("isp1760_qtd",
+ sizeof(struct isp1760_qtd), 0, SLAB_TEMPORARY |
+ SLAB_MEM_SPREAD, NULL);
+
+ if (!qtd_cachep)
+ return -ENOMEM;
+
+ qh_cachep = kmem_cache_create("isp1760_qh", sizeof(struct isp1760_qh),
+ 0, SLAB_TEMPORARY | SLAB_MEM_SPREAD, NULL);
+
+ if (!qh_cachep) {
+ kmem_cache_destroy(qtd_cachep);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+void deinit_kmem_cache(void)
+{
+ kmem_cache_destroy(qtd_cachep);
+ kmem_cache_destroy(qh_cachep);
+}
+
+struct usb_hcd *isp1760_register(u64 res_start, u64 res_len, int irq,
+ u64 irqflags, struct device *dev, const char *busname)
+{
+ struct usb_hcd *hcd;
+ struct isp1760_hcd *priv;
+ int ret;
+
+ if (usb_disabled())
+ return ERR_PTR(-ENODEV);
+
+ /* prevent usb-core allocating DMA pages */
+ dev->dma_mask = NULL;
+
+ hcd = usb_create_hcd(&isp1760_hc_driver, dev, dev->bus_id);
+ if (!hcd)
+ return ERR_PTR(-ENOMEM);
+
+ priv = hcd_to_priv(hcd);
+ init_memory(priv);
+ hcd->regs = ioremap(res_start, res_len);
+ if (!hcd->regs) {
+ ret = -EIO;
+ goto err_put;
+ }
+
+ ret = usb_add_hcd(hcd, irq, irqflags);
+ if (ret)
+ goto err_unmap;
+
+ hcd->irq = irq;
+ hcd->rsrc_start = res_start;
+ hcd->rsrc_len = res_len;
+
+ return hcd;
+
+err_unmap:
+ iounmap(hcd->regs);
+
+err_put:
+ usb_put_hcd(hcd);
+
+ return ERR_PTR(ret);
+}
+
+MODULE_DESCRIPTION("Driver for the ISP1760 USB-controller from NXP");
+MODULE_AUTHOR("Sebastian Siewior <bigeasy@linuxtronix.de>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h
new file mode 100644
index 0000000..3d86d0f
--- /dev/null
+++ b/drivers/usb/host/isp1760-hcd.h
@@ -0,0 +1,206 @@
+#ifndef _ISP1760_HCD_H_
+#define _ISP1760_HCD_H_
+
+/* exports for if */
+struct usb_hcd *isp1760_register(u64 res_start, u64 res_len, int irq,
+ u64 irqflags, struct device *dev, const char *busname);
+int init_kmem_once(void);
+void deinit_kmem_cache(void);
+
+/* EHCI capability registers */
+#define HC_CAPLENGTH 0x00
+#define HC_HCSPARAMS 0x04
+#define HC_HCCPARAMS 0x08
+
+/* EHCI operational registers */
+#define HC_USBCMD 0x20
+#define HC_USBSTS 0x24
+#define HC_FRINDEX 0x2c
+#define HC_CONFIGFLAG 0x60
+#define HC_PORTSC1 0x64
+#define HC_ISO_PTD_DONEMAP_REG 0x130
+#define HC_ISO_PTD_SKIPMAP_REG 0x134
+#define HC_ISO_PTD_LASTPTD_REG 0x138
+#define HC_INT_PTD_DONEMAP_REG 0x140
+#define HC_INT_PTD_SKIPMAP_REG 0x144
+#define HC_INT_PTD_LASTPTD_REG 0x148
+#define HC_ATL_PTD_DONEMAP_REG 0x150
+#define HC_ATL_PTD_SKIPMAP_REG 0x154
+#define HC_ATL_PTD_LASTPTD_REG 0x158
+
+/* Configuration Register */
+#define HC_HW_MODE_CTRL 0x300
+#define ALL_ATX_RESET (1 << 31)
+#define HW_DATA_BUS_32BIT (1 << 8)
+#define HW_DACK_POL_HIGH (1 << 6)
+#define HW_DREQ_POL_HIGH (1 << 5)
+#define HW_INTR_HIGH_ACT (1 << 2)
+#define HW_INTR_EDGE_TRIG (1 << 1)
+#define HW_GLOBAL_INTR_EN (1 << 0)
+
+#define HC_CHIP_ID_REG 0x304
+#define HC_SCRATCH_REG 0x308
+
+#define HC_RESET_REG 0x30c
+#define SW_RESET_RESET_HC (1 << 1)
+#define SW_RESET_RESET_ALL (1 << 0)
+
+#define HC_BUFFER_STATUS_REG 0x334
+#define ATL_BUFFER 0x1
+#define INT_BUFFER 0x2
+#define ISO_BUFFER 0x4
+#define BUFFER_MAP 0x7
+
+#define HC_MEMORY_REG 0x33c
+#define HC_PORT1_CTRL 0x374
+#define PORT1_POWER (3 << 3)
+#define PORT1_INIT1 (1 << 7)
+#define PORT1_INIT2 (1 << 23)
+
+/* Interrupt Register */
+#define HC_INTERRUPT_REG 0x310
+
+#define HC_INTERRUPT_ENABLE 0x314
+#define INTERRUPT_ENABLE_MASK (HC_INTL_INT | HC_ATL_INT | HC_EOT_INT)
+#define FINAL_HW_CONFIG (HW_GLOBAL_INTR_EN | HW_DATA_BUS_32BIT)
+
+#define HC_ISO_INT (1 << 9)
+#define HC_ATL_INT (1 << 8)
+#define HC_INTL_INT (1 << 7)
+#define HC_EOT_INT (1 << 3)
+#define HC_SOT_INT (1 << 1)
+
+#define HC_ISO_IRQ_MASK_OR_REG 0x318
+#define HC_INT_IRQ_MASK_OR_REG 0x31C
+#define HC_ATL_IRQ_MASK_OR_REG 0x320
+#define HC_ISO_IRQ_MASK_AND_REG 0x324
+#define HC_INT_IRQ_MASK_AND_REG 0x328
+#define HC_ATL_IRQ_MASK_AND_REG 0x32C
+
+/* Register sets */
+#define HC_BEGIN_OF_ATL 0x0c00
+#define HC_BEGIN_OF_INT 0x0800
+#define HC_BEGIN_OF_ISO 0x0400
+#define HC_BEGIN_OF_PAYLOAD 0x1000
+
+/* urb state*/
+#define DELETE_URB (0x0008)
+#define NO_TRANSFER_ACTIVE (0xffffffff)
+
+#define ATL_REGS_OFFSET (0xc00)
+#define INT_REGS_OFFSET (0x800)
+
+/* Philips Transfer Descriptor (PTD) */
+struct ptd {
+ __le32 dw0;
+ __le32 dw1;
+ __le32 dw2;
+ __le32 dw3;
+ __le32 dw4;
+ __le32 dw5;
+ __le32 dw6;
+ __le32 dw7;
+};
+
+struct inter_packet_info {
+ void *data_buffer;
+ u32 payload;
+#define PTD_FIRE_NEXT (1 << 0)
+#define PTD_URB_FINISHED (1 << 1)
+ struct urb *urb;
+ struct isp1760_qh *qh;
+ struct isp1760_qtd *qtd;
+};
+
+
+typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh,
+ struct isp1760_qtd *qtd);
+
+#define isp1760_info(priv, fmt, args...) \
+ dev_info(priv_to_hcd(priv)->self.controller, fmt, ##args)
+
+#define isp1760_err(priv, fmt, args...) \
+ dev_err(priv_to_hcd(priv)->self.controller, fmt, ##args)
+
+/* chip memory management */
+struct memory_chunk {
+ unsigned int start;
+ unsigned int size;
+ unsigned int free;
+};
+
+/*
+ * 60kb divided in:
+ * - 32 blocks @ 256 bytes
+ * - 20 blocks @ 1024 bytes
+ * - 4 blocks @ 8192 bytes
+ */
+
+#define BLOCK_1_NUM 32
+#define BLOCK_2_NUM 20
+#define BLOCK_3_NUM 4
+
+#define BLOCK_1_SIZE 256
+#define BLOCK_2_SIZE 1024
+#define BLOCK_3_SIZE 8192
+#define BLOCKS (BLOCK_1_NUM + BLOCK_2_NUM + BLOCK_3_NUM)
+#define PAYLOAD_SIZE 0xf000
+
+/* I saw if some reloads if the pointer was negative */
+#define ISP1760_NULL_POINTER (0x400)
+
+/* ATL */
+/* DW0 */
+#define PTD_VALID 1
+#define PTD_LENGTH(x) (((u32) x) << 3)
+#define PTD_MAXPACKET(x) (((u32) x) << 18)
+#define PTD_MULTI(x) (((u32) x) << 29)
+#define PTD_ENDPOINT(x) (((u32) x) << 31)
+/* DW1 */
+#define PTD_DEVICE_ADDR(x) (((u32) x) << 3)
+#define PTD_PID_TOKEN(x) (((u32) x) << 10)
+#define PTD_TRANS_BULK ((u32) 2 << 12)
+#define PTD_TRANS_INT ((u32) 3 << 12)
+#define PTD_TRANS_SPLIT ((u32) 1 << 14)
+#define PTD_SE_USB_LOSPEED ((u32) 2 << 16)
+#define PTD_PORT_NUM(x) (((u32) x) << 18)
+#define PTD_HUB_NUM(x) (((u32) x) << 25)
+#define PTD_PING(x) (((u32) x) << 26)
+/* DW2 */
+#define PTD_RL_CNT(x) (((u32) x) << 25)
+#define PTD_DATA_START_ADDR(x) (((u32) x) << 8)
+#define BASE_ADDR 0x1000
+/* DW3 */
+#define PTD_CERR(x) (((u32) x) << 23)
+#define PTD_NAC_CNT(x) (((u32) x) << 19)
+#define PTD_ACTIVE ((u32) 1 << 31)
+#define PTD_DATA_TOGGLE(x) (((u32) x) << 25)
+
+#define DW3_HALT_BIT (1 << 30)
+#define DW3_ERROR_BIT (1 << 28)
+#define DW3_QTD_ACTIVE (1 << 31)
+
+#define INT_UNDERRUN (1 << 2)
+#define INT_BABBLE (1 << 1)
+#define INT_EXACT (1 << 0)
+
+#define DW1_GET_PID(x) (((x) >> 10) & 0x3)
+#define PTD_XFERRED_LENGTH(x) ((x) & 0x7fff)
+#define PTD_XFERRED_LENGTH_LO(x) ((x) & 0x7ff)
+
+#define SETUP_PID (2)
+#define IN_PID (1)
+#define OUT_PID (0)
+#define GET_QTD_TOKEN_TYPE(x) ((x) & 0x3)
+
+#define DATA_TOGGLE (1 << 31)
+#define GET_DATA_TOGGLE(x) ((x) >> 31)
+
+/* Errata 1 */
+#define RL_COUNTER (0)
+#define NAK_COUNTER (0)
+#define ERR_COUNTER (2)
+
+#define HC_ATL_PL_SIZE (8192)
+
+#endif
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
new file mode 100644
index 0000000..73fb2a3
--- /dev/null
+++ b/drivers/usb/host/isp1760-if.c
@@ -0,0 +1,298 @@
+/*
+ * Glue code for the ISP1760 driver and bus
+ * Currently there is support for
+ * - OpenFirmware
+ * - PCI
+ *
+ * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de>
+ *
+ */
+
+#include <linux/usb.h>
+#include <linux/io.h>
+
+#include "../core/hcd.h"
+#include "isp1760-hcd.h"
+
+#ifdef CONFIG_USB_ISP1760_OF
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#endif
+
+#ifdef CONFIG_USB_ISP1760_PCI
+#include <linux/pci.h>
+#endif
+
+#ifdef CONFIG_USB_ISP1760_OF
+static int of_isp1760_probe(struct of_device *dev,
+ const struct of_device_id *match)
+{
+ struct usb_hcd *hcd;
+ struct device_node *dp = dev->node;
+ struct resource *res;
+ struct resource memory;
+ struct of_irq oirq;
+ int virq;
+ u64 res_len;
+ int ret;
+
+ ret = of_address_to_resource(dp, 0, &memory);
+ if (ret)
+ return -ENXIO;
+
+ res = request_mem_region(memory.start, memory.end - memory.start + 1,
+ dev->dev.bus_id);
+ if (!res)
+ return -EBUSY;
+
+ res_len = memory.end - memory.start + 1;
+
+ if (of_irq_map_one(dp, 0, &oirq)) {
+ ret = -ENODEV;
+ goto release_reg;
+ }
+
+ virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+ oirq.size);
+
+ hcd = isp1760_register(memory.start, res_len, virq,
+ IRQF_SHARED | IRQF_DISABLED, &dev->dev, dev->dev.bus_id);
+ if (IS_ERR(hcd)) {
+ ret = PTR_ERR(hcd);
+ goto release_reg;
+ }
+
+ dev_set_drvdata(&dev->dev, hcd);
+ return ret;
+
+release_reg:
+ release_mem_region(memory.start, memory.end - memory.start + 1);
+ return ret;
+}
+
+static int of_isp1760_remove(struct of_device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(&dev->dev);
+
+ dev_set_drvdata(&dev->dev, NULL);
+
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+ return 0;
+}
+
+static struct of_device_id of_isp1760_match[] = {
+ {
+ .compatible = "nxp,usb-isp1760",
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, of_isp1760_match);
+
+static struct of_platform_driver isp1760_of_driver = {
+ .name = "nxp-isp1760",
+ .match_table = of_isp1760_match,
+ .probe = of_isp1760_probe,
+ .remove = of_isp1760_remove,
+};
+#endif
+
+#ifdef CONFIG_USB_ISP1760_PCI
+static u32 nxp_pci_io_base;
+static u32 iolength;
+static u32 pci_mem_phy0;
+static u32 length;
+static u8 *chip_addr;
+static u8 *iobase;
+
+static int __devinit isp1761_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ u8 latency, limit;
+ __u32 reg_data;
+ int retry_count;
+ int length;
+ int status = 1;
+ struct usb_hcd *hcd;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ if (pci_enable_device(dev) < 0)
+ return -ENODEV;
+
+ if (!dev->irq)
+ return -ENODEV;
+
+ /* Grab the PLX PCI mem maped port start address we need */
+ nxp_pci_io_base = pci_resource_start(dev, 0);
+ iolength = pci_resource_len(dev, 0);
+
+ if (!request_mem_region(nxp_pci_io_base, iolength, "ISP1761 IO MEM")) {
+ printk(KERN_ERR "request region #1\n");
+ return -EBUSY;
+ }
+
+ iobase = ioremap_nocache(nxp_pci_io_base, iolength);
+ if (!iobase) {
+ printk(KERN_ERR "ioremap #1\n");
+ release_mem_region(nxp_pci_io_base, iolength);
+ return -ENOMEM;
+ }
+ /* Grab the PLX PCI shared memory of the ISP 1761 we need */
+ pci_mem_phy0 = pci_resource_start(dev, 3);
+ length = pci_resource_len(dev, 3);
+
+ if (length < 0xffff) {
+ printk(KERN_ERR "memory length for this resource is less than "
+ "required\n");
+ release_mem_region(nxp_pci_io_base, iolength);
+ iounmap(iobase);
+ return -ENOMEM;
+ }
+
+ if (!request_mem_region(pci_mem_phy0, length, "ISP-PCI")) {
+ printk(KERN_ERR "host controller already in use\n");
+ release_mem_region(nxp_pci_io_base, iolength);
+ iounmap(iobase);
+ return -EBUSY;
+ }
+
+ /* bad pci latencies can contribute to overruns */
+ pci_read_config_byte(dev, PCI_LATENCY_TIMER, &latency);
+ if (latency) {
+ pci_read_config_byte(dev, PCI_MAX_LAT, &limit);
+ if (limit && limit < latency)
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, limit);
+ }
+
+ /* Try to check whether we can access Scratch Register of
+ * Host Controller or not. The initial PCI access is retried until
+ * local init for the PCI bridge is completed
+ */
+ retry_count = 20;
+ reg_data = 0;
+ while ((reg_data != 0xFACE) && retry_count) {
+ /*by default host is in 16bit mode, so
+ * io operations at this stage must be 16 bit
+ * */
+ writel(0xface, chip_addr + HC_SCRATCH_REG);
+ udelay(100);
+ reg_data = readl(chip_addr + HC_SCRATCH_REG);
+ retry_count--;
+ }
+
+ /* Host Controller presence is detected by writing to scratch register
+ * and reading back and checking the contents are same or not
+ */
+ if (reg_data != 0xFACE) {
+ err("scratch register mismatch %x", reg_data);
+ goto clean;
+ }
+
+ pci_set_master(dev);
+
+ status = readl(iobase + 0x68);
+ status |= 0x900;
+ writel(status, iobase + 0x68);
+
+ dev->dev.dma_mask = NULL;
+ hcd = isp1760_register(pci_mem_phy0, length, dev->irq,
+ IRQF_SHARED | IRQF_DISABLED, &dev->dev, dev->dev.bus_id);
+ pci_set_drvdata(dev, hcd);
+ if (!hcd)
+ return 0;
+clean:
+ status = -ENODEV;
+ iounmap(iobase);
+ release_mem_region(pci_mem_phy0, length);
+ release_mem_region(nxp_pci_io_base, iolength);
+ return status;
+}
+static void isp1761_pci_remove(struct pci_dev *dev)
+{
+ struct usb_hcd *hcd;
+
+ hcd = pci_get_drvdata(dev);
+
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+
+ pci_disable_device(dev);
+
+ iounmap(iobase);
+ iounmap(chip_addr);
+
+ release_mem_region(nxp_pci_io_base, iolength);
+ release_mem_region(pci_mem_phy0, length);
+}
+
+static void isp1761_pci_shutdown(struct pci_dev *dev)
+{
+ printk(KERN_ERR "ips1761_pci_shutdown\n");
+}
+
+static const struct pci_device_id isp1760_plx [] = { {
+ /* handle any USB 2.0 EHCI controller */
+ PCI_DEVICE_CLASS(((PCI_CLASS_BRIDGE_OTHER << 8) | (0x06 << 16)), ~0),
+ .driver_data = 0,
+},
+{ /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, isp1760_plx);
+
+static struct pci_driver isp1761_pci_driver = {
+ .name = "isp1760",
+ .id_table = isp1760_plx,
+ .probe = isp1761_pci_probe,
+ .remove = isp1761_pci_remove,
+ .shutdown = isp1761_pci_shutdown,
+};
+#endif
+
+static int __init isp1760_init(void)
+{
+ int ret;
+
+ init_kmem_once();
+
+#ifdef CONFIG_USB_ISP1760_OF
+ ret = of_register_platform_driver(&isp1760_of_driver);
+ if (ret) {
+ deinit_kmem_cache();
+ return ret;
+ }
+#endif
+#ifdef CONFIG_USB_ISP1760_PCI
+ ret = pci_register_driver(&isp1761_pci_driver);
+ if (ret)
+ goto unreg_of;
+#endif
+ return ret;
+
+#ifdef CONFIG_USB_ISP1760_PCI
+unreg_of:
+#endif
+#ifdef CONFIG_USB_ISP1760_OF
+ of_unregister_platform_driver(&isp1760_of_driver);
+#endif
+ deinit_kmem_cache();
+ return ret;
+}
+module_init(isp1760_init);
+
+static void __exit isp1760_exit(void)
+{
+#ifdef CONFIG_USB_ISP1760_OF
+ of_unregister_platform_driver(&isp1760_of_driver);
+#endif
+#ifdef CONFIG_USB_ISP1760_PCI
+ pci_unregister_driver(&isp1761_pci_driver);
+#endif
+ deinit_kmem_cache();
+}
+module_exit(isp1760_exit);
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 17dc2ec..79a7802 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -613,7 +613,7 @@
static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port)
{
__hc32 __iomem *portstat = &ohci->regs->roothub.portstatus [port];
- u32 temp;
+ u32 temp = 0;
u16 now = ohci_readl(ohci, &ohci->regs->fmnumber);
u16 reset_done = now + PORT_RESET_MSEC;
int limit_1 = DIV_ROUND_UP(PORT_RESET_MSEC, PORT_RESET_HW_MSEC);
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index d3e0d8a..3a7bfe7a 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -234,7 +234,7 @@
return 0;
}
-static int remote_wakeup_is_broken(struct uhci_hcd *uhci)
+static int global_suspend_mode_is_broken(struct uhci_hcd *uhci)
{
int port;
const char *sys_info;
@@ -261,27 +261,60 @@
__acquires(uhci->lock)
{
int auto_stop;
- int int_enable, egsm_enable;
+ int int_enable, egsm_enable, wakeup_enable;
struct usb_device *rhdev = uhci_to_hcd(uhci)->self.root_hub;
auto_stop = (new_state == UHCI_RH_AUTO_STOPPED);
dev_dbg(&rhdev->dev, "%s%s\n", __func__,
(auto_stop ? " (auto-stop)" : ""));
- /* Enable resume-detect interrupts if they work.
- * Then enter Global Suspend mode if _it_ works, still configured.
+ /* Start off by assuming Resume-Detect interrupts and EGSM work
+ * and that remote wakeups should be enabled.
*/
egsm_enable = USBCMD_EGSM;
- uhci->working_RD = 1;
+ uhci->RD_enable = 1;
int_enable = USBINTR_RESUME;
- if (remote_wakeup_is_broken(uhci))
- egsm_enable = 0;
- if (resume_detect_interrupts_are_broken(uhci) || !egsm_enable ||
+ wakeup_enable = 1;
+
+ /* In auto-stop mode wakeups must always be detected, but
+ * Resume-Detect interrupts may be prohibited. (In the absence
+ * of CONFIG_PM, they are always disallowed.)
+ */
+ if (auto_stop) {
+ if (!device_may_wakeup(&rhdev->dev))
+ int_enable = 0;
+
+ /* In bus-suspend mode wakeups may be disabled, but if they are
+ * allowed then so are Resume-Detect interrupts.
+ */
+ } else {
#ifdef CONFIG_PM
- (!auto_stop && !rhdev->do_remote_wakeup) ||
+ if (!rhdev->do_remote_wakeup)
+ wakeup_enable = 0;
#endif
- (auto_stop && !device_may_wakeup(&rhdev->dev)))
- uhci->working_RD = int_enable = 0;
+ }
+
+ /* EGSM causes the root hub to echo a 'K' signal (resume) out any
+ * port which requests a remote wakeup. According to the USB spec,
+ * every hub is supposed to do this. But if we are ignoring
+ * remote-wakeup requests anyway then there's no point to it.
+ * We also shouldn't enable EGSM if it's broken.
+ */
+ if (!wakeup_enable || global_suspend_mode_is_broken(uhci))
+ egsm_enable = 0;
+
+ /* If we're ignoring wakeup events then there's no reason to
+ * enable Resume-Detect interrupts. We also shouldn't enable
+ * them if they are broken or disallowed.
+ *
+ * This logic may lead us to enabling RD but not EGSM. The UHCI
+ * spec foolishly says that RD works only when EGSM is on, but
+ * there's no harm in enabling it anyway -- perhaps some chips
+ * will implement it!
+ */
+ if (!wakeup_enable || resume_detect_interrupts_are_broken(uhci) ||
+ !int_enable)
+ uhci->RD_enable = int_enable = 0;
outw(int_enable, uhci->io_addr + USBINTR);
outw(egsm_enable | USBCMD_CF, uhci->io_addr + USBCMD);
@@ -308,7 +341,11 @@
uhci->rh_state = new_state;
uhci->is_stopped = UHCI_IS_STOPPED;
- uhci_to_hcd(uhci)->poll_rh = !int_enable;
+
+ /* If interrupts don't work and remote wakeup is enabled then
+ * the suspended root hub needs to be polled.
+ */
+ uhci_to_hcd(uhci)->poll_rh = (!int_enable && wakeup_enable);
uhci_scan_schedule(uhci);
uhci_fsbr_off(uhci);
@@ -344,9 +381,12 @@
* for 20 ms.
*/
if (uhci->rh_state == UHCI_RH_SUSPENDED) {
+ unsigned egsm;
+
+ /* Keep EGSM on if it was set before */
+ egsm = inw(uhci->io_addr + USBCMD) & USBCMD_EGSM;
uhci->rh_state = UHCI_RH_RESUMING;
- outw(USBCMD_FGR | USBCMD_EGSM | USBCMD_CF,
- uhci->io_addr + USBCMD);
+ outw(USBCMD_FGR | USBCMD_CF | egsm, uhci->io_addr + USBCMD);
spin_unlock_irq(&uhci->lock);
msleep(20);
spin_lock_irq(&uhci->lock);
@@ -801,8 +841,10 @@
spin_unlock_irq(&uhci->lock);
- if (!uhci->working_RD) {
- /* Suspended root hub needs to be polled */
+ /* If interrupts don't work and remote wakeup is enabled then
+ * the suspended root hub needs to be polled.
+ */
+ if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup) {
hcd->poll_rh = 1;
usb_hcd_poll_rh_status(hcd);
}
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 340d6ed..7d01c56 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -400,8 +400,9 @@
unsigned int scan_in_progress:1; /* Schedule scan is running */
unsigned int need_rescan:1; /* Redo the schedule scan */
unsigned int dead:1; /* Controller has died */
- unsigned int working_RD:1; /* Suspended root hub doesn't
- need to be polled */
+ unsigned int RD_enable:1; /* Suspended root hub with
+ Resume-Detect interrupts
+ enabled */
unsigned int is_initialized:1; /* Data structure is usable */
unsigned int fsbr_is_on:1; /* FSBR is turned on */
unsigned int fsbr_is_wanted:1; /* Does any URB want FSBR? */
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 11580e8..7aafd53f 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -148,7 +148,7 @@
/* Structure to hold all of our device specific stuff */
struct ld_usb {
- struct semaphore sem; /* locks this structure */
+ struct mutex mutex; /* locks this structure */
struct usb_interface* intf; /* save off the usb interface pointer */
int open_count; /* number of times this port has been opened */
@@ -319,7 +319,7 @@
return -ENODEV;
/* lock this device */
- if (down_interruptible(&dev->sem))
+ if (mutex_lock_interruptible(&dev->mutex))
return -ERESTARTSYS;
/* allow opening only once */
@@ -358,7 +358,7 @@
file->private_data = dev;
unlock_exit:
- up(&dev->sem);
+ mutex_unlock(&dev->mutex);
return retval;
}
@@ -378,7 +378,7 @@
goto exit;
}
- if (down_interruptible(&dev->sem)) {
+ if (mutex_lock_interruptible(&dev->mutex)) {
retval = -ERESTARTSYS;
goto exit;
}
@@ -389,7 +389,7 @@
}
if (dev->intf == NULL) {
/* the device was unplugged before the file was released */
- up(&dev->sem);
+ mutex_unlock(&dev->mutex);
/* unlock here as ld_usb_delete frees dev */
ld_usb_delete(dev);
goto exit;
@@ -402,7 +402,7 @@
dev->open_count = 0;
unlock_exit:
- up(&dev->sem);
+ mutex_unlock(&dev->mutex);
exit:
return retval;
@@ -448,7 +448,7 @@
goto exit;
/* lock this object */
- if (down_interruptible(&dev->sem)) {
+ if (mutex_lock_interruptible(&dev->mutex)) {
retval = -ERESTARTSYS;
goto exit;
}
@@ -505,7 +505,7 @@
unlock_exit:
/* unlock the device */
- up(&dev->sem);
+ mutex_unlock(&dev->mutex);
exit:
return retval;
@@ -528,7 +528,7 @@
goto exit;
/* lock this object */
- if (down_interruptible(&dev->sem)) {
+ if (mutex_lock_interruptible(&dev->mutex)) {
retval = -ERESTARTSYS;
goto exit;
}
@@ -602,7 +602,7 @@
unlock_exit:
/* unlock the device */
- up(&dev->sem);
+ mutex_unlock(&dev->mutex);
exit:
return retval;
@@ -651,7 +651,7 @@
dev_err(&intf->dev, "Out of memory\n");
goto exit;
}
- init_MUTEX(&dev->sem);
+ mutex_init(&dev->mutex);
spin_lock_init(&dev->rbsl);
dev->intf = intf;
init_waitqueue_head(&dev->read_wait);
@@ -765,15 +765,15 @@
/* give back our minor */
usb_deregister_dev(intf, &ld_usb_class);
- down(&dev->sem);
+ mutex_lock(&dev->mutex);
/* if the device is not opened, then we clean up right now */
if (!dev->open_count) {
- up(&dev->sem);
+ mutex_unlock(&dev->mutex);
ld_usb_delete(dev);
} else {
dev->intf = NULL;
- up(&dev->sem);
+ mutex_unlock(&dev->mutex);
}
dev_info(&intf->dev, "LD USB Device #%d now disconnected\n",
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index a519838..742be3c 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -79,30 +79,10 @@
/* set up all urbs so they can be used with either bulk or interrupt */
#define INTERRUPT_RATE 1 /* msec/transfer */
-#define xprintk(tdev,level,fmt,args...) \
- dev_printk(level , &(tdev)->intf->dev , fmt , ## args)
-
-#ifdef DEBUG
-#define DBG(dev,fmt,args...) \
- xprintk(dev , KERN_DEBUG , fmt , ## args)
-#else
-#define DBG(dev,fmt,args...) \
- do { } while (0)
-#endif /* DEBUG */
-
-#ifdef VERBOSE
-#define VDBG DBG
-#else
-#define VDBG(dev,fmt,args...) \
- do { } while (0)
-#endif /* VERBOSE */
-
-#define ERROR(dev,fmt,args...) \
- xprintk(dev , KERN_ERR , fmt , ## args)
-#define WARN(dev,fmt,args...) \
- xprintk(dev , KERN_WARNING , fmt , ## args)
-#define INFO(dev,fmt,args...) \
- xprintk(dev , KERN_INFO , fmt , ## args)
+#define ERROR(tdev, fmt, args...) \
+ dev_err(&(tdev)->intf->dev , fmt , ## args)
+#define WARN(tdev, fmt, args...) \
+ dev_warn(&(tdev)->intf->dev , fmt , ## args)
/*-------------------------------------------------------------------------*/
@@ -236,7 +216,7 @@
static unsigned pattern = 0;
module_param (pattern, uint, S_IRUGO);
-// MODULE_PARM_DESC (pattern, "i/o pattern (0 == zeroes)");
+MODULE_PARM_DESC(pattern, "i/o pattern (0 == zeroes)");
static inline void simple_fill_buf (struct urb *urb)
{
@@ -257,7 +237,7 @@
}
}
-static inline int simple_check_buf (struct urb *urb)
+static inline int simple_check_buf(struct usbtest_dev *tdev, struct urb *urb)
{
unsigned i;
u8 expected;
@@ -285,7 +265,7 @@
}
if (*buf == expected)
continue;
- dbg ("buf[%d] = %d (not %d)", i, *buf, expected);
+ ERROR(tdev, "buf[%d] = %d (not %d)\n", i, *buf, expected);
return -EINVAL;
}
return 0;
@@ -299,6 +279,7 @@
}
static int simple_io (
+ struct usbtest_dev *tdev,
struct urb *urb,
int iterations,
int vary,
@@ -324,7 +305,7 @@
retval = urb->status;
urb->dev = udev;
if (retval == 0 && usb_pipein (urb->pipe))
- retval = simple_check_buf (urb);
+ retval = simple_check_buf(tdev, urb);
if (vary) {
int len = urb->transfer_buffer_length;
@@ -341,7 +322,7 @@
urb->transfer_buffer_length = max;
if (expected != retval)
- dev_dbg (&udev->dev,
+ dev_err(&udev->dev,
"%s failed, iterations left %d, status %d (not %d)\n",
label, iterations, retval, expected);
return retval;
@@ -357,7 +338,7 @@
static void free_sglist (struct scatterlist *sg, int nents)
{
unsigned i;
-
+
if (!sg)
return;
for (i = 0; i < nents; i++) {
@@ -415,7 +396,7 @@
}
static int perform_sglist (
- struct usb_device *udev,
+ struct usbtest_dev *tdev,
unsigned iterations,
int pipe,
struct usb_sg_request *req,
@@ -423,6 +404,7 @@
int nents
)
{
+ struct usb_device *udev = testdev_to_usbdev(tdev);
int retval = 0;
while (retval == 0 && iterations-- > 0) {
@@ -431,7 +413,7 @@
? (INTERRUPT_RATE << 3)
: INTERRUPT_RATE,
sg, nents, 0, GFP_KERNEL);
-
+
if (retval)
break;
usb_sg_wait (req);
@@ -446,7 +428,8 @@
// failure if retval is as we expected ...
if (retval)
- dbg ("perform_sglist failed, iterations left %d, status %d",
+ ERROR(tdev, "perform_sglist failed, "
+ "iterations left %d, status %d\n",
iterations, retval);
return retval;
}
@@ -505,28 +488,28 @@
alternate);
}
-static int is_good_config (char *buf, int len)
+static int is_good_config(struct usbtest_dev *tdev, int len)
{
struct usb_config_descriptor *config;
-
+
if (len < sizeof *config)
return 0;
- config = (struct usb_config_descriptor *) buf;
+ config = (struct usb_config_descriptor *) tdev->buf;
switch (config->bDescriptorType) {
case USB_DT_CONFIG:
case USB_DT_OTHER_SPEED_CONFIG:
if (config->bLength != 9) {
- dbg ("bogus config descriptor length");
+ ERROR(tdev, "bogus config descriptor length\n");
return 0;
}
/* this bit 'must be 1' but often isn't */
if (!realworld && !(config->bmAttributes & 0x80)) {
- dbg ("high bit of config attributes not set");
+ ERROR(tdev, "high bit of config attributes not set\n");
return 0;
}
if (config->bmAttributes & 0x1f) { /* reserved == 0 */
- dbg ("reserved config bits set");
+ ERROR(tdev, "reserved config bits set\n");
return 0;
}
break;
@@ -538,7 +521,7 @@
return 1;
if (le16_to_cpu(config->wTotalLength) >= TBUF_SIZE) /* max partial read */
return 1;
- dbg ("bogus config descriptor read size");
+ ERROR(tdev, "bogus config descriptor read size\n");
return 0;
}
@@ -571,7 +554,7 @@
/* 9.2.3 constrains the range here */
alt = iface->altsetting [i].desc.bAlternateSetting;
if (alt < 0 || alt >= iface->num_altsetting) {
- dev_dbg (&iface->dev,
+ dev_err(&iface->dev,
"invalid alt [%d].bAltSetting = %d\n",
i, alt);
}
@@ -583,7 +566,7 @@
/* [9.4.10] set_interface */
retval = set_altsetting (dev, alt);
if (retval) {
- dev_dbg (&iface->dev, "can't set_interface = %d, %d\n",
+ dev_err(&iface->dev, "can't set_interface = %d, %d\n",
alt, retval);
return retval;
}
@@ -591,7 +574,7 @@
/* [9.4.4] get_interface always works */
retval = get_altsetting (dev);
if (retval != alt) {
- dev_dbg (&iface->dev, "get alt should be %d, was %d\n",
+ dev_err(&iface->dev, "get alt should be %d, was %d\n",
alt, retval);
return (retval < 0) ? retval : -EDOM;
}
@@ -611,7 +594,7 @@
USB_DIR_IN | USB_RECIP_DEVICE,
0, 0, dev->buf, 1, USB_CTRL_GET_TIMEOUT);
if (retval != 1 || dev->buf [0] != expected) {
- dev_dbg (&iface->dev, "get config --> %d %d (1 %d)\n",
+ dev_err(&iface->dev, "get config --> %d %d (1 %d)\n",
retval, dev->buf[0], expected);
return (retval < 0) ? retval : -EDOM;
}
@@ -621,7 +604,7 @@
retval = usb_get_descriptor (udev, USB_DT_DEVICE, 0,
dev->buf, sizeof udev->descriptor);
if (retval != sizeof udev->descriptor) {
- dev_dbg (&iface->dev, "dev descriptor --> %d\n", retval);
+ dev_err(&iface->dev, "dev descriptor --> %d\n", retval);
return (retval < 0) ? retval : -EDOM;
}
@@ -629,8 +612,8 @@
for (i = 0; i < udev->descriptor.bNumConfigurations; i++) {
retval = usb_get_descriptor (udev, USB_DT_CONFIG, i,
dev->buf, TBUF_SIZE);
- if (!is_good_config (dev->buf, retval)) {
- dev_dbg (&iface->dev,
+ if (!is_good_config(dev, retval)) {
+ dev_err(&iface->dev,
"config [%d] descriptor --> %d\n",
i, retval);
return (retval < 0) ? retval : -EDOM;
@@ -650,14 +633,14 @@
sizeof (struct usb_qualifier_descriptor));
if (retval == -EPIPE) {
if (udev->speed == USB_SPEED_HIGH) {
- dev_dbg (&iface->dev,
+ dev_err(&iface->dev,
"hs dev qualifier --> %d\n",
retval);
return (retval < 0) ? retval : -EDOM;
}
/* usb2.0 but not high-speed capable; fine */
} else if (retval != sizeof (struct usb_qualifier_descriptor)) {
- dev_dbg (&iface->dev, "dev qualifier --> %d\n", retval);
+ dev_err(&iface->dev, "dev qualifier --> %d\n", retval);
return (retval < 0) ? retval : -EDOM;
} else
d = (struct usb_qualifier_descriptor *) dev->buf;
@@ -669,8 +652,8 @@
retval = usb_get_descriptor (udev,
USB_DT_OTHER_SPEED_CONFIG, i,
dev->buf, TBUF_SIZE);
- if (!is_good_config (dev->buf, retval)) {
- dev_dbg (&iface->dev,
+ if (!is_good_config(dev, retval)) {
+ dev_err(&iface->dev,
"other speed config --> %d\n",
retval);
return (retval < 0) ? retval : -EDOM;
@@ -683,7 +666,7 @@
/* [9.4.5] get_status always works */
retval = usb_get_status (udev, USB_RECIP_DEVICE, 0, dev->buf);
if (retval != 2) {
- dev_dbg (&iface->dev, "get dev status --> %d\n", retval);
+ dev_err(&iface->dev, "get dev status --> %d\n", retval);
return (retval < 0) ? retval : -EDOM;
}
@@ -693,11 +676,11 @@
retval = usb_get_status (udev, USB_RECIP_INTERFACE,
iface->altsetting [0].desc.bInterfaceNumber, dev->buf);
if (retval != 2) {
- dev_dbg (&iface->dev, "get interface status --> %d\n", retval);
+ dev_err(&iface->dev, "get interface status --> %d\n", retval);
return (retval < 0) ? retval : -EDOM;
}
// FIXME get status for each endpoint in the interface
-
+
return 0;
}
@@ -752,8 +735,9 @@
*/
if (subcase->number > 0) {
if ((subcase->number - ctx->last) != 1) {
- dbg ("subcase %d completed out of order, last %d",
- subcase->number, ctx->last);
+ ERROR(ctx->dev,
+ "subcase %d completed out of order, last %d\n",
+ subcase->number, ctx->last);
status = -EDOM;
ctx->last = subcase->number;
goto error;
@@ -777,7 +761,7 @@
else if (subcase->number == 12 && status == -EPIPE)
status = 0;
else
- dbg ("subtest %d error, status %d",
+ ERROR(ctx->dev, "subtest %d error, status %d\n",
subcase->number, status);
}
@@ -788,9 +772,12 @@
int i;
ctx->status = status;
- info ("control queue %02x.%02x, err %d, %d left",
+ ERROR(ctx->dev, "control queue %02x.%02x, err %d, "
+ "%d left, subcase %d, len %d/%d\n",
reqp->bRequestType, reqp->bRequest,
- status, ctx->count);
+ status, ctx->count, subcase->number,
+ urb->actual_length,
+ urb->transfer_buffer_length);
/* FIXME this "unlink everything" exit route should
* be a separate test case.
@@ -799,7 +786,8 @@
/* unlink whatever's still pending */
for (i = 1; i < ctx->param->sglen; i++) {
struct urb *u = ctx->urb [
- (i + subcase->number) % ctx->param->sglen];
+ (i + subcase->number)
+ % ctx->param->sglen];
if (u == urb || !u->dev)
continue;
@@ -812,7 +800,8 @@
case -EIDRM:
continue;
default:
- dbg ("urb unlink --> %d", status);
+ ERROR(ctx->dev, "urb unlink --> %d\n",
+ status);
}
}
status = ctx->status;
@@ -822,14 +811,15 @@
/* resubmit if we need to, else mark this as done */
if ((status == 0) && (ctx->pending < ctx->count)) {
if ((status = usb_submit_urb (urb, GFP_ATOMIC)) != 0) {
- dbg ("can't resubmit ctrl %02x.%02x, err %d",
+ ERROR(ctx->dev,
+ "can't resubmit ctrl %02x.%02x, err %d\n",
reqp->bRequestType, reqp->bRequest, status);
urb->dev = NULL;
} else
ctx->pending++;
} else
urb->dev = NULL;
-
+
/* signal completion when nothing's queued */
if (ctx->pending == 0)
complete (&ctx->complete);
@@ -918,11 +908,11 @@
req.wValue = cpu_to_le16 (USB_DT_INTERFACE << 8);
// interface == 0
len = sizeof (struct usb_interface_descriptor);
- expected = EPIPE;
+ expected = -EPIPE;
break;
// NOTE: two consecutive stalls in the queue here.
// that tests fault recovery a bit more aggressively.
- case 8: // clear endpoint halt (USUALLY STALLS)
+ case 8: // clear endpoint halt (MAY STALL)
req.bRequest = USB_REQ_CLEAR_FEATURE;
req.bRequestType = USB_RECIP_ENDPOINT;
// wValue 0 == ep halt
@@ -965,7 +955,7 @@
break;
case 14: // short read; try to fill the last packet
req.wValue = cpu_to_le16 ((USB_DT_DEVICE << 8) | 0);
- // device descriptor size == 18 bytes
+ /* device descriptor size == 18 bytes */
len = udev->descriptor.bMaxPacketSize0;
switch (len) {
case 8: len = 24; break;
@@ -974,7 +964,7 @@
expected = -EREMOTEIO;
break;
default:
- err ("bogus number of ctrl queue testcases!");
+ ERROR(dev, "bogus number of ctrl queue testcases!\n");
context.status = -EINVAL;
goto cleanup;
}
@@ -1003,7 +993,7 @@
for (i = 0; i < param->sglen; i++) {
context.status = usb_submit_urb (urb [i], GFP_ATOMIC);
if (context.status != 0) {
- dbg ("can't submit urb[%d], status %d",
+ ERROR(dev, "can't submit urb[%d], status %d\n",
i, context.status);
context.count = context.pending;
break;
@@ -1070,7 +1060,7 @@
* due to errors, or is just NAKing requests.
*/
if ((retval = usb_submit_urb (urb, GFP_KERNEL)) != 0) {
- dev_dbg (&dev->intf->dev, "submit fail %d\n", retval);
+ dev_err(&dev->intf->dev, "submit fail %d\n", retval);
return retval;
}
@@ -1087,13 +1077,13 @@
* "normal" drivers would prevent resubmission, but
* since we're testing unlink paths, we can't.
*/
- dev_dbg (&dev->intf->dev, "unlink retry\n");
+ ERROR(dev, "unlink retry\n");
goto retry;
}
} else
usb_kill_urb (urb);
if (!(retval == 0 || retval == -EINPROGRESS)) {
- dev_dbg (&dev->intf->dev, "unlink fail %d\n", retval);
+ dev_err(&dev->intf->dev, "unlink fail %d\n", retval);
return retval;
}
@@ -1121,7 +1111,7 @@
/*-------------------------------------------------------------------------*/
-static int verify_not_halted (int ep, struct urb *urb)
+static int verify_not_halted(struct usbtest_dev *tdev, int ep, struct urb *urb)
{
int retval;
u16 status;
@@ -1129,20 +1119,21 @@
/* shouldn't look or act halted */
retval = usb_get_status (urb->dev, USB_RECIP_ENDPOINT, ep, &status);
if (retval < 0) {
- dbg ("ep %02x couldn't get no-halt status, %d", ep, retval);
+ ERROR(tdev, "ep %02x couldn't get no-halt status, %d\n",
+ ep, retval);
return retval;
}
if (status != 0) {
- dbg ("ep %02x bogus status: %04x != 0", ep, status);
+ ERROR(tdev, "ep %02x bogus status: %04x != 0\n", ep, status);
return -EINVAL;
}
- retval = simple_io (urb, 1, 0, 0, __func__);
+ retval = simple_io(tdev, urb, 1, 0, 0, __func__);
if (retval != 0)
return -EINVAL;
return 0;
}
-static int verify_halted (int ep, struct urb *urb)
+static int verify_halted(struct usbtest_dev *tdev, int ep, struct urb *urb)
{
int retval;
u16 status;
@@ -1150,29 +1141,30 @@
/* should look and act halted */
retval = usb_get_status (urb->dev, USB_RECIP_ENDPOINT, ep, &status);
if (retval < 0) {
- dbg ("ep %02x couldn't get halt status, %d", ep, retval);
+ ERROR(tdev, "ep %02x couldn't get halt status, %d\n",
+ ep, retval);
return retval;
}
le16_to_cpus(&status);
if (status != 1) {
- dbg ("ep %02x bogus status: %04x != 1", ep, status);
+ ERROR(tdev, "ep %02x bogus status: %04x != 1\n", ep, status);
return -EINVAL;
}
- retval = simple_io (urb, 1, 0, -EPIPE, __func__);
+ retval = simple_io(tdev, urb, 1, 0, -EPIPE, __func__);
if (retval != -EPIPE)
return -EINVAL;
- retval = simple_io (urb, 1, 0, -EPIPE, "verify_still_halted");
+ retval = simple_io(tdev, urb, 1, 0, -EPIPE, "verify_still_halted");
if (retval != -EPIPE)
return -EINVAL;
return 0;
}
-static int test_halt (int ep, struct urb *urb)
+static int test_halt(struct usbtest_dev *tdev, int ep, struct urb *urb)
{
int retval;
/* shouldn't look or act halted now */
- retval = verify_not_halted (ep, urb);
+ retval = verify_not_halted(tdev, ep, urb);
if (retval < 0)
return retval;
@@ -1182,20 +1174,20 @@
USB_ENDPOINT_HALT, ep,
NULL, 0, USB_CTRL_SET_TIMEOUT);
if (retval < 0) {
- dbg ("ep %02x couldn't set halt, %d", ep, retval);
+ ERROR(tdev, "ep %02x couldn't set halt, %d\n", ep, retval);
return retval;
}
- retval = verify_halted (ep, urb);
+ retval = verify_halted(tdev, ep, urb);
if (retval < 0)
return retval;
/* clear halt (tests API + protocol), verify it worked */
retval = usb_clear_halt (urb->dev, urb->pipe);
if (retval < 0) {
- dbg ("ep %02x couldn't clear halt, %d", ep, retval);
+ ERROR(tdev, "ep %02x couldn't clear halt, %d\n", ep, retval);
return retval;
}
- retval = verify_not_halted (ep, urb);
+ retval = verify_not_halted(tdev, ep, urb);
if (retval < 0)
return retval;
@@ -1217,7 +1209,7 @@
if (dev->in_pipe) {
ep = usb_pipeendpoint (dev->in_pipe) | USB_DIR_IN;
urb->pipe = dev->in_pipe;
- retval = test_halt (ep, urb);
+ retval = test_halt(dev, ep, urb);
if (retval < 0)
goto done;
}
@@ -1225,7 +1217,7 @@
if (dev->out_pipe) {
ep = usb_pipeendpoint (dev->out_pipe);
urb->pipe = dev->out_pipe;
- retval = test_halt (ep, urb);
+ retval = test_halt(dev, ep, urb);
}
done:
simple_free_urb (urb);
@@ -1275,7 +1267,7 @@
if (retval != len) {
what = "write";
if (retval >= 0) {
- INFO(dev, "ctrl_out, wlen %d (expected %d)\n",
+ ERROR(dev, "ctrl_out, wlen %d (expected %d)\n",
retval, len);
retval = -EBADMSG;
}
@@ -1289,7 +1281,7 @@
if (retval != len) {
what = "read";
if (retval >= 0) {
- INFO(dev, "ctrl_out, rlen %d (expected %d)\n",
+ ERROR(dev, "ctrl_out, rlen %d (expected %d)\n",
retval, len);
retval = -EBADMSG;
}
@@ -1299,7 +1291,7 @@
/* fail if we can't verify */
for (j = 0; j < len; j++) {
if (buf [j] != (u8) (i + j)) {
- INFO (dev, "ctrl_out, byte %d is %d not %d\n",
+ ERROR(dev, "ctrl_out, byte %d is %d not %d\n",
j, buf [j], (u8) i + j);
retval = -EBADMSG;
break;
@@ -1321,7 +1313,7 @@
}
if (retval < 0)
- INFO (dev, "ctrl_out %s failed, code %d, count %d\n",
+ ERROR (dev, "ctrl_out %s failed, code %d, count %d\n",
what, retval, i);
kfree (buf);
@@ -1366,7 +1358,7 @@
case 0:
goto done;
default:
- dev_dbg (&ctx->dev->intf->dev,
+ dev_err(&ctx->dev->intf->dev,
"iso resubmit err %d\n",
status);
/* FALLTHROUGH */
@@ -1381,7 +1373,7 @@
ctx->pending--;
if (ctx->pending == 0) {
if (ctx->errors)
- dev_dbg (&ctx->dev->intf->dev,
+ dev_err(&ctx->dev->intf->dev,
"iso test, %lu errors out of %lu\n",
ctx->errors, ctx->packet_count);
complete (&ctx->done);
@@ -1458,7 +1450,7 @@
memset (urbs, 0, sizeof urbs);
udev = testdev_to_usbdev (dev);
- dev_dbg (&dev->intf->dev,
+ dev_info(&dev->intf->dev,
"... iso period %d %sframes, wMaxPacket %04x\n",
1 << (desc->bInterval - 1),
(udev->speed == USB_SPEED_HIGH) ? "micro" : "",
@@ -1475,7 +1467,7 @@
urbs [i]->context = &context;
}
packets *= param->iterations;
- dev_dbg (&dev->intf->dev,
+ dev_info(&dev->intf->dev,
"... total %lu msec (%lu packets)\n",
(packets * (1 << (desc->bInterval - 1)))
/ ((udev->speed == USB_SPEED_HIGH) ? 8 : 1),
@@ -1537,6 +1529,13 @@
* except indirectly by consuming USB bandwidth and CPU resources for test
* threads and request completion. But the only way to know that for sure
* is to test when HC queues are in use by many devices.
+ *
+ * WARNING: Because usbfs grabs udev->dev.sem before calling this ioctl(),
+ * it locks out usbcore in certain code paths. Notably, if you disconnect
+ * the device-under-test, khubd will wait block forever waiting for the
+ * ioctl to complete ... so that usb_disconnect() can abort the pending
+ * urbs and then call usbtest_disconnect(). To abort a test, you're best
+ * off just killing the userspace task and waiting for it to exit.
*/
static int
@@ -1575,7 +1574,7 @@
* altsettings; force a default so most tests don't need to check.
*/
if (dev->info->alt >= 0) {
- int res;
+ int res;
if (intf->altsetting->desc.bInterfaceNumber) {
mutex_unlock(&dev->lock);
@@ -1604,7 +1603,7 @@
switch (param->test_num) {
case 0:
- dev_dbg (&intf->dev, "TEST 0: NOP\n");
+ dev_info(&intf->dev, "TEST 0: NOP\n");
retval = 0;
break;
@@ -1612,7 +1611,7 @@
case 1:
if (dev->out_pipe == 0)
break;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 1: write %d bytes %u times\n",
param->length, param->iterations);
urb = simple_alloc_urb (udev, dev->out_pipe, param->length);
@@ -1621,13 +1620,13 @@
break;
}
// FIRMWARE: bulk sink (maybe accepts short writes)
- retval = simple_io (urb, param->iterations, 0, 0, "test1");
+ retval = simple_io(dev, urb, param->iterations, 0, 0, "test1");
simple_free_urb (urb);
break;
case 2:
if (dev->in_pipe == 0)
break;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 2: read %d bytes %u times\n",
param->length, param->iterations);
urb = simple_alloc_urb (udev, dev->in_pipe, param->length);
@@ -1636,13 +1635,13 @@
break;
}
// FIRMWARE: bulk source (maybe generates short writes)
- retval = simple_io (urb, param->iterations, 0, 0, "test2");
+ retval = simple_io(dev, urb, param->iterations, 0, 0, "test2");
simple_free_urb (urb);
break;
case 3:
if (dev->out_pipe == 0 || param->vary == 0)
break;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 3: write/%d 0..%d bytes %u times\n",
param->vary, param->length, param->iterations);
urb = simple_alloc_urb (udev, dev->out_pipe, param->length);
@@ -1651,14 +1650,14 @@
break;
}
// FIRMWARE: bulk sink (maybe accepts short writes)
- retval = simple_io (urb, param->iterations, param->vary,
+ retval = simple_io(dev, urb, param->iterations, param->vary,
0, "test3");
simple_free_urb (urb);
break;
case 4:
if (dev->in_pipe == 0 || param->vary == 0)
break;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 4: read/%d 0..%d bytes %u times\n",
param->vary, param->length, param->iterations);
urb = simple_alloc_urb (udev, dev->in_pipe, param->length);
@@ -1667,7 +1666,7 @@
break;
}
// FIRMWARE: bulk source (maybe generates short writes)
- retval = simple_io (urb, param->iterations, param->vary,
+ retval = simple_io(dev, urb, param->iterations, param->vary,
0, "test4");
simple_free_urb (urb);
break;
@@ -1676,7 +1675,7 @@
case 5:
if (dev->out_pipe == 0 || param->sglen == 0)
break;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 5: write %d sglists %d entries of %d bytes\n",
param->iterations,
param->sglen, param->length);
@@ -1686,7 +1685,7 @@
break;
}
// FIRMWARE: bulk sink (maybe accepts short writes)
- retval = perform_sglist (udev, param->iterations, dev->out_pipe,
+ retval = perform_sglist(dev, param->iterations, dev->out_pipe,
&req, sg, param->sglen);
free_sglist (sg, param->sglen);
break;
@@ -1694,7 +1693,7 @@
case 6:
if (dev->in_pipe == 0 || param->sglen == 0)
break;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 6: read %d sglists %d entries of %d bytes\n",
param->iterations,
param->sglen, param->length);
@@ -1704,14 +1703,14 @@
break;
}
// FIRMWARE: bulk source (maybe generates short writes)
- retval = perform_sglist (udev, param->iterations, dev->in_pipe,
+ retval = perform_sglist(dev, param->iterations, dev->in_pipe,
&req, sg, param->sglen);
free_sglist (sg, param->sglen);
break;
case 7:
if (dev->out_pipe == 0 || param->sglen == 0 || param->vary == 0)
break;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 7: write/%d %d sglists %d entries 0..%d bytes\n",
param->vary, param->iterations,
param->sglen, param->length);
@@ -1721,14 +1720,14 @@
break;
}
// FIRMWARE: bulk sink (maybe accepts short writes)
- retval = perform_sglist (udev, param->iterations, dev->out_pipe,
+ retval = perform_sglist(dev, param->iterations, dev->out_pipe,
&req, sg, param->sglen);
free_sglist (sg, param->sglen);
break;
case 8:
if (dev->in_pipe == 0 || param->sglen == 0 || param->vary == 0)
break;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 8: read/%d %d sglists %d entries 0..%d bytes\n",
param->vary, param->iterations,
param->sglen, param->length);
@@ -1738,7 +1737,7 @@
break;
}
// FIRMWARE: bulk source (maybe generates short writes)
- retval = perform_sglist (udev, param->iterations, dev->in_pipe,
+ retval = perform_sglist(dev, param->iterations, dev->in_pipe,
&req, sg, param->sglen);
free_sglist (sg, param->sglen);
break;
@@ -1746,13 +1745,14 @@
/* non-queued sanity tests for control (chapter 9 subset) */
case 9:
retval = 0;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 9: ch9 (subset) control tests, %d times\n",
param->iterations);
for (i = param->iterations; retval == 0 && i--; /* NOP */)
retval = ch9_postconfig (dev);
if (retval)
- dbg ("ch9 subset failed, iterations left %d", i);
+ dev_err(&intf->dev, "ch9 subset failed, "
+ "iterations left %d\n", i);
break;
/* queued control messaging */
@@ -1760,7 +1760,7 @@
if (param->sglen == 0)
break;
retval = 0;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 10: queue %d control calls, %d times\n",
param->sglen,
param->iterations);
@@ -1772,26 +1772,26 @@
if (dev->in_pipe == 0 || !param->length)
break;
retval = 0;
- dev_dbg (&intf->dev, "TEST 11: unlink %d reads of %d\n",
+ dev_info(&intf->dev, "TEST 11: unlink %d reads of %d\n",
param->iterations, param->length);
for (i = param->iterations; retval == 0 && i--; /* NOP */)
retval = unlink_simple (dev, dev->in_pipe,
param->length);
if (retval)
- dev_dbg (&intf->dev, "unlink reads failed %d, "
+ dev_err(&intf->dev, "unlink reads failed %d, "
"iterations left %d\n", retval, i);
break;
case 12:
if (dev->out_pipe == 0 || !param->length)
break;
retval = 0;
- dev_dbg (&intf->dev, "TEST 12: unlink %d writes of %d\n",
+ dev_info(&intf->dev, "TEST 12: unlink %d writes of %d\n",
param->iterations, param->length);
for (i = param->iterations; retval == 0 && i--; /* NOP */)
retval = unlink_simple (dev, dev->out_pipe,
param->length);
if (retval)
- dev_dbg (&intf->dev, "unlink writes failed %d, "
+ dev_err(&intf->dev, "unlink writes failed %d, "
"iterations left %d\n", retval, i);
break;
@@ -1800,24 +1800,24 @@
if (dev->out_pipe == 0 && dev->in_pipe == 0)
break;
retval = 0;
- dev_dbg (&intf->dev, "TEST 13: set/clear %d halts\n",
+ dev_info(&intf->dev, "TEST 13: set/clear %d halts\n",
param->iterations);
for (i = param->iterations; retval == 0 && i--; /* NOP */)
retval = halt_simple (dev);
-
+
if (retval)
- DBG (dev, "halts failed, iterations left %d\n", i);
+ ERROR(dev, "halts failed, iterations left %d\n", i);
break;
/* control write tests */
case 14:
if (!dev->info->ctrl_out)
break;
- dev_dbg (&intf->dev, "TEST 14: %d ep0out, %d..%d vary %d\n",
+ dev_info(&intf->dev, "TEST 14: %d ep0out, %d..%d vary %d\n",
param->iterations,
realworld ? 1 : 0, param->length,
param->vary);
- retval = ctrl_out (dev, param->iterations,
+ retval = ctrl_out(dev, param->iterations,
param->length, param->vary);
break;
@@ -1825,7 +1825,7 @@
case 15:
if (dev->out_iso_pipe == 0 || param->sglen == 0)
break;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 15: write %d iso, %d entries of %d bytes\n",
param->iterations,
param->sglen, param->length);
@@ -1838,7 +1838,7 @@
case 16:
if (dev->in_iso_pipe == 0 || param->sglen == 0)
break;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 16: read %d iso, %d entries of %d bytes\n",
param->iterations,
param->sglen, param->length);
@@ -1898,7 +1898,8 @@
return -ENODEV;
if (product && le16_to_cpu(udev->descriptor.idProduct) != (u16)product)
return -ENODEV;
- dbg ("matched module params, vend=0x%04x prod=0x%04x",
+ dev_info(&intf->dev, "matched module params, "
+ "vend=0x%04x prod=0x%04x\n",
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct));
}
@@ -1940,7 +1941,8 @@
status = get_endpoints (dev, intf);
if (status < 0) {
- dbg ("couldn't get endpoints, %d\n", status);
+ WARN(dev, "couldn't get endpoints, %d\n",
+ status);
return status;
}
/* may find bulk or ISO pipes */
@@ -2082,21 +2084,9 @@
};
#endif
-// FIXME remove this
-static struct usbtest_info hact_info = {
- .name = "FX2/hact",
- //.ep_in = 6,
- .ep_out = 2,
- .alt = -1,
-};
-
static struct usb_device_id id_table [] = {
- { USB_DEVICE (0x0547, 0x1002),
- .driver_info = (unsigned long) &hact_info,
- },
-
/*-------------------------------------------------------------*/
/* EZ-USB devices which download firmware to replace (or in our
@@ -2185,7 +2175,7 @@
{
#ifdef GENERIC
if (vendor)
- dbg ("params: vend=0x%04x prod=0x%04x", vendor, product);
+ pr_debug("params: vend=0x%04x prod=0x%04x\n", vendor, product);
#endif
return usb_register (&usbtest_driver);
}
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 9b1bb34..db6f97a 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -147,7 +147,7 @@
*/
static int serial_buf_data_avail(struct circ_buf *cb)
{
- return CIRC_CNT(cb->head,cb->tail,AIRCABLE_BUF_SIZE);
+ return CIRC_CNT(cb->head, cb->tail, AIRCABLE_BUF_SIZE);
}
/*
@@ -171,7 +171,7 @@
cb->head = (cb->head + c) & (AIRCABLE_BUF_SIZE-1);
buf += c;
count -= c;
- ret= c;
+ ret = c;
}
return ret;
}
@@ -197,7 +197,7 @@
cb->tail = (cb->tail + c) & (AIRCABLE_BUF_SIZE-1);
buf += c;
count -= c;
- ret= c;
+ ret = c;
}
return ret;
}
@@ -208,7 +208,7 @@
{
int count, result;
struct aircable_private *priv = usb_get_serial_port_data(port);
- unsigned char* buf;
+ unsigned char *buf;
__le16 *dbuf;
dbg("%s - port %d", __func__, port->number);
if (port->write_urb_busy)
@@ -229,7 +229,8 @@
buf[1] = TX_HEADER_1;
dbuf = (__le16 *)&buf[2];
*dbuf = cpu_to_le16((u16)count);
- serial_buf_get(priv->tx_buf,buf + HCI_HEADER_LENGTH, MAX_HCI_FRAMESIZE);
+ serial_buf_get(priv->tx_buf, buf + HCI_HEADER_LENGTH,
+ MAX_HCI_FRAMESIZE);
memcpy(port->write_urb->transfer_buffer, buf,
count + HCI_HEADER_LENGTH);
@@ -261,7 +262,7 @@
struct tty_struct *tty;
unsigned char *data;
int count;
- if (priv->rx_flags & THROTTLED){
+ if (priv->rx_flags & THROTTLED) {
if (priv->rx_flags & ACTUALLY_THROTTLED)
schedule_work(&priv->rx_work);
return;
@@ -282,10 +283,10 @@
count = min(64, serial_buf_data_avail(priv->rx_buf));
if (count <= 0)
- return; //We have finished sending everything.
+ return; /* We have finished sending everything. */
tty_prepare_flip_string(tty, &data, count);
- if (!data){
+ if (!data) {
err("%s- kzalloc(%d) failed.", __func__, count);
return;
}
@@ -304,9 +305,10 @@
static int aircable_probe(struct usb_serial *serial,
const struct usb_device_id *id)
{
- struct usb_host_interface *iface_desc = serial->interface->cur_altsetting;
+ struct usb_host_interface *iface_desc = serial->interface->
+ cur_altsetting;
struct usb_endpoint_descriptor *endpoint;
- int num_bulk_out=0;
+ int num_bulk_out = 0;
int i;
for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
@@ -325,13 +327,13 @@
return 0;
}
-static int aircable_attach (struct usb_serial *serial)
+static int aircable_attach(struct usb_serial *serial)
{
struct usb_serial_port *port = serial->port[0];
struct aircable_private *priv;
priv = kzalloc(sizeof(struct aircable_private), GFP_KERNEL);
- if (!priv){
+ if (!priv) {
err("%s- kmalloc(%Zd) failed.", __func__,
sizeof(struct aircable_private));
return -ENOMEM;
@@ -392,7 +394,7 @@
usb_serial_debug_data(debug, &port->dev, __func__, count, source);
- if (!count){
+ if (!count) {
dbg("%s - write request of 0 bytes", __func__);
return count;
}
@@ -418,31 +420,31 @@
/* This has been taken from cypress_m8.c cypress_write_int_callback */
switch (status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d",
- __func__, status);
- port->write_urb_busy = 0;
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d",
+ __func__, status);
+ port->write_urb_busy = 0;
+ return;
+ default:
+ /* error in the urb, so we have to resubmit it */
+ dbg("%s - Overflow in write", __func__);
+ dbg("%s - nonzero write bulk status received: %d",
+ __func__, status);
+ port->write_urb->transfer_buffer_length = 1;
+ port->write_urb->dev = port->serial->dev;
+ result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+ if (result)
+ dev_err(&urb->dev->dev,
+ "%s - failed resubmitting write urb, error %d\n",
+ __func__, result);
+ else
return;
- default:
- /* error in the urb, so we have to resubmit it */
- dbg("%s - Overflow in write", __func__);
- dbg("%s - nonzero write bulk status received: %d",
- __func__, status);
- port->write_urb->transfer_buffer_length = 1;
- port->write_urb->dev = port->serial->dev;
- result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
- if (result)
- dev_err(&urb->dev->dev,
- "%s - failed resubmitting write urb, error %d\n",
- __func__, result);
- else
- return;
}
port->write_urb_busy = 0;
@@ -472,11 +474,11 @@
dbg("%s - caught -EPROTO, resubmitting the urb",
__func__);
usb_fill_bulk_urb(port->read_urb, port->serial->dev,
- usb_rcvbulkpipe(port->serial->dev,
- port->bulk_in_endpointAddress),
- port->read_urb->transfer_buffer,
- port->read_urb->transfer_buffer_length,
- aircable_read_bulk_callback, port);
+ usb_rcvbulkpipe(port->serial->dev,
+ port->bulk_in_endpointAddress),
+ port->read_urb->transfer_buffer,
+ port->read_urb->transfer_buffer_length,
+ aircable_read_bulk_callback, port);
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
@@ -490,7 +492,7 @@
}
usb_serial_debug_data(debug, &port->dev, __func__,
- urb->actual_length,urb->transfer_buffer);
+ urb->actual_length, urb->transfer_buffer);
tty = port->tty;
if (tty && urb->actual_length) {
@@ -507,9 +509,9 @@
no_packages = urb->actual_length / (HCI_COMPLETE_FRAME);
if (urb->actual_length % HCI_COMPLETE_FRAME != 0)
- no_packages+=1;
+ no_packages++;
- for (i = 0; i < no_packages ;i++) {
+ for (i = 0; i < no_packages; i++) {
if (remaining > (HCI_COMPLETE_FRAME))
package_length = HCI_COMPLETE_FRAME;
else
@@ -529,7 +531,7 @@
if (port->open_count) {
usb_fill_bulk_urb(port->read_urb, port->serial->dev,
usb_rcvbulkpipe(port->serial->dev,
- port->bulk_in_endpointAddress),
+ port->bulk_in_endpointAddress),
port->read_urb->transfer_buffer,
port->read_urb->transfer_buffer_length,
aircable_read_bulk_callback, port);
@@ -602,7 +604,7 @@
.unthrottle = aircable_unthrottle,
};
-static int __init aircable_init (void)
+static int __init aircable_init(void)
{
int retval;
retval = usb_serial_register(&aircable_device);
@@ -619,7 +621,7 @@
return retval;
}
-static void __exit aircable_exit (void)
+static void __exit aircable_exit(void)
{
usb_deregister(&aircable_driver);
usb_serial_deregister(&aircable_device);
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index 725b6b9..0798c14 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -68,8 +68,9 @@
val |= 0x02;
return usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
- 0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT);
+ usb_rcvctrlpipe(serial->dev, 0),
+ 0x22, 0x21, val, 0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
}
return 0;
@@ -90,17 +91,19 @@
__func__, status);
return;
}
- usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &port->dev, __func__,
+ urb->actual_length, data);
tty = port->tty;
if (tty && urb->actual_length) {
- tty_insert_flip_string (tty, data, urb->actual_length);
- tty_flip_buffer_push (tty);
+ tty_insert_flip_string(tty, data, urb->actual_length);
+ tty_flip_buffer_push(tty);
}
- result = usb_submit_urb (urb, GFP_ATOMIC);
+ result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
- dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n",
+ dev_err(&port->dev,
+ "%s - failed resubmitting read urb, error %d\n",
__func__, result);
return;
}
@@ -115,7 +118,7 @@
dbg("%s - port %d", __func__, port->number);
/* free up the transfer buffer, as usb_free_urb() does not do this */
- kfree (urb->transfer_buffer);
+ kfree(urb->transfer_buffer);
if (status)
dbg("%s - nonzero write bulk status received: %d",
@@ -171,7 +174,7 @@
}
usb_fill_bulk_urb(urb, serial->dev,
usb_rcvbulkpipe(serial->dev,
- port->bulk_out_endpointAddress),
+ port->bulk_out_endpointAddress),
buffer, buffer_size,
airprime_read_bulk_callback, port);
result = usb_submit_urb(urb, GFP_KERNEL);
@@ -183,7 +186,8 @@
__func__, i, port->number, result);
goto errout;
}
- /* remember this urb so we can kill it when the port is closed */
+ /* remember this urb so we can kill it when the
+ port is closed */
priv->read_urbp[i] = urb;
}
@@ -192,22 +196,22 @@
goto out;
errout:
- /* some error happened, cancel any submitted urbs and clean up anything that
- got allocated successfully */
+ /* some error happened, cancel any submitted urbs and clean up
+ anything that got allocated successfully */
while (i-- != 0) {
urb = priv->read_urbp[i];
buffer = urb->transfer_buffer;
- usb_kill_urb (urb);
- usb_free_urb (urb);
- kfree (buffer);
+ usb_kill_urb(urb);
+ usb_free_urb(urb);
+ kfree(buffer);
}
out:
return result;
}
-static void airprime_close(struct usb_serial_port *port, struct file * filp)
+static void airprime_close(struct usb_serial_port *port, struct file *filp)
{
struct airprime_private *priv = usb_get_serial_port_data(port);
int i;
@@ -220,16 +224,16 @@
mutex_lock(&port->serial->disc_mutex);
if (!port->serial->disconnected)
airprime_send_setup(port);
- mutex_lock(&port->serial->disc_mutex);
+ mutex_unlock(&port->serial->disc_mutex);
for (i = 0; i < NUM_READ_URBS; ++i) {
- usb_kill_urb (priv->read_urbp[i]);
- kfree (priv->read_urbp[i]->transfer_buffer);
- usb_free_urb (priv->read_urbp[i]);
+ usb_kill_urb(priv->read_urbp[i]);
+ kfree(priv->read_urbp[i]->transfer_buffer);
+ usb_free_urb(priv->read_urbp[i]);
}
/* free up private structure */
- kfree (priv);
+ kfree(priv);
usb_set_serial_port_data(port, NULL);
}
@@ -259,10 +263,10 @@
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
dev_err(&port->dev, "no more free urbs\n");
- kfree (buffer);
+ kfree(buffer);
return -ENOMEM;
}
- memcpy (buffer, buf, count);
+ memcpy(buffer, buf, count);
usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
@@ -279,7 +283,7 @@
"%s - usb_submit_urb(write bulk) failed with status = %d\n",
__func__, status);
count = status;
- kfree (buffer);
+ kfree(buffer);
} else {
spin_lock_irqsave(&priv->lock, flags);
++priv->outstanding_urbs;
@@ -287,7 +291,7 @@
}
/* we are done with this urb, so let the host driver
* really free it when it is finished with it */
- usb_free_urb (urb);
+ usb_free_urb(urb);
return count;
}
@@ -315,8 +319,10 @@
{
int retval;
- airprime_device.num_ports =
- (endpoints > 0 && endpoints <= MAX_BULK_EPS) ? endpoints : NUM_BULK_EPS;
+ airprime_device.num_ports = endpoints;
+ if (endpoints < 0 || endpoints >= MAX_BULK_EPS)
+ airprime_device.num_ports = NUM_BULK_EPS;
+
retval = usb_serial_register(&airprime_device);
if (retval)
return retval;
@@ -341,6 +347,7 @@
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled");
module_param(buffer_size, int, 0);
-MODULE_PARM_DESC(buffer_size, "Size of the transfer buffers in bytes (default 4096)");
+MODULE_PARM_DESC(buffer_size,
+ "Size of the transfer buffers in bytes (default 4096)");
module_param(endpoints, int, 0);
MODULE_PARM_DESC(endpoints, "Number of bulk EPs to configure (default 3)");
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 599ab2e..77895c8 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -24,7 +24,7 @@
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <linux/serial.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
static int debug;
@@ -246,29 +246,29 @@
baud = tty_get_baud_rate(port->tty);
switch (baud) {
- case 75:
- case 150:
- case 300:
- case 600:
- case 1200:
- case 1800:
- case 2400:
- case 4800:
- case 9600:
- case 19200:
- case 38400:
- case 57600:
- case 115200:
- case 230400:
- case 460800:
- /* Report the resulting rate back to the caller */
- tty_encode_baud_rate(port->tty, baud, baud);
- break;
- /* set 9600 as default (if given baudrate is invalid for example) */
- default:
- tty_encode_baud_rate(port->tty, 9600, 9600);
- case 0:
- baud = 9600;
+ case 75:
+ case 150:
+ case 300:
+ case 600:
+ case 1200:
+ case 1800:
+ case 2400:
+ case 4800:
+ case 9600:
+ case 19200:
+ case 38400:
+ case 57600:
+ case 115200:
+ case 230400:
+ case 460800:
+ /* Report the resulting rate back to the caller */
+ tty_encode_baud_rate(port->tty, baud, baud);
+ break;
+ /* set 9600 as default (if given baudrate is invalid for example) */
+ default:
+ tty_encode_baud_rate(port->tty, 9600, 9600);
+ case 0:
+ baud = 9600;
}
/*
@@ -380,19 +380,19 @@
switch (cmd) {
case TIOCGSERIAL:
/* XXX: Some of these values are probably wrong. */
- memset(&serstruct, 0, sizeof (serstruct));
+ memset(&serstruct, 0, sizeof(serstruct));
serstruct.type = PORT_16654;
serstruct.line = port->serial->minor;
serstruct.port = port->number;
serstruct.custom_divisor = 0;
serstruct.baud_base = 460800;
- if (copy_to_user(user_arg, &serstruct, sizeof (serstruct)))
+ if (copy_to_user(user_arg, &serstruct, sizeof(serstruct)))
return -EFAULT;
return 0;
case TIOCSSERIAL:
- if (copy_from_user(&serstruct, user_arg, sizeof (serstruct)))
+ if (copy_from_user(&serstruct, user_arg, sizeof(serstruct)))
return -EFAULT;
return 0;
default:
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index d947d95..ba28fdc 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -130,7 +130,7 @@
return -ENOMEM;
r = ch341_control_in(dev, 0x95, 0x0706, 0, buffer, size);
- if ( r < 0)
+ if (r < 0)
goto out;
/* Not having the datasheet for the CH341, we ignore the bytes returned
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index dc0ea08..f5b57b1 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -73,6 +73,7 @@
{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+ { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
{ USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index c7329f4..5b349ec 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -133,6 +133,14 @@
static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_3_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_4_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_5_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_6_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_7_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 6da539e..504edf8 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -40,6 +40,17 @@
/* AlphaMicro Components AMC-232USB01 device */
#define FTDI_AMC232_PID 0xFF00 /* Product Id */
+/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
+/* the VID is the standard ftdi vid (FTDI_VID) */
+#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */
+#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */
+#define FTDI_SCS_DEVICE_2_PID 0xD012
+#define FTDI_SCS_DEVICE_3_PID 0xD013
+#define FTDI_SCS_DEVICE_4_PID 0xD014
+#define FTDI_SCS_DEVICE_5_PID 0xD015
+#define FTDI_SCS_DEVICE_6_PID 0xD016
+#define FTDI_SCS_DEVICE_7_PID 0xD017
+
/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
#define FTDI_ACTZWAVE_PID 0xF2D0
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 8a21764..a01e987 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -643,7 +643,7 @@
static int iuu_bulk_write(struct usb_serial_port *port)
{
struct iuu_private *priv = usb_get_serial_port_data(port);
- unsigned int flags;
+ unsigned long flags;
int result;
int i;
char *buf_ptr = port->write_urb->transfer_buffer;
@@ -694,7 +694,7 @@
{
struct usb_serial_port *port = urb->context;
struct iuu_private *priv = usb_get_serial_port_data(port);
- unsigned int flags;
+ unsigned long flags;
int status;
int error = 0;
int len = 0;
@@ -759,7 +759,7 @@
int count)
{
struct iuu_private *priv = usb_get_serial_port_data(port);
- unsigned int flags;
+ unsigned long flags;
dbg("%s - enter", __func__);
if (count > 256)
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 6bcb82d..78f2f6d 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1713,7 +1713,7 @@
{
struct moschip_port *mos7840_port;
unsigned int mcr;
- unsigned int status;
+ int status;
dbg("%s - port %d", __func__, port->number);
@@ -1740,11 +1740,10 @@
mos7840_port->shadowMCR = mcr;
- status = 0;
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr);
if (status < 0) {
dbg("setting MODEM_CONTROL_REGISTER Failed\n");
- return -1;
+ return status;
}
return 0;
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 0f6d234..3d92496 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -123,7 +123,8 @@
config USB_STORAGE_ONETOUCH
bool "Support OneTouch Button on Maxtor Hard Drives"
- depends on USB_STORAGE && INPUT_EVDEV
+ depends on USB_STORAGE
+ depends on INPUT=y || INPUT=USB_STORAGE
help
Say Y here to include additional code to support the Maxtor OneTouch
USB hard drive's onetouch button.
diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c
index d88824b..898e67d 100644
--- a/drivers/usb/storage/cypress_atacb.c
+++ b/drivers/usb/storage/cypress_atacb.c
@@ -46,7 +46,7 @@
}
memcpy(save_cmnd, srb->cmnd, sizeof(save_cmnd));
- memset(srb->cmnd, 0, sizeof(srb->cmnd));
+ memset(srb->cmnd, 0, MAX_COMMAND_SIZE);
/* check if we support the command */
if (save_cmnd[1] >> 5) /* MULTIPLE_COUNT */
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 971d13d..3addcd8 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -292,6 +292,7 @@
/* maximum number of LUNs supported */
unsigned char MaxLUNs;
+ unsigned char cmnd[BLK_MAX_CDB];
struct scsi_cmnd srb;
struct scatterlist sg;
};
@@ -450,6 +451,7 @@
memset(&ata, 0, sizeof(ata));
memset(&srb_dev, 0, sizeof(srb_dev));
+ srb->cmnd = info->cmnd;
srb->device = &srb_dev;
++srb->serial_number;
diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c
index a28d491..d617e8a 100644
--- a/drivers/usb/storage/libusual.c
+++ b/drivers/usb/storage/libusual.c
@@ -135,7 +135,7 @@
stat[type].fls |= USU_MOD_FL_THREAD;
spin_unlock_irqrestore(&usu_lock, flags);
- task = kthread_run(usu_probe_thread, (void*)type, "libusual_%d", type);
+ task = kthread_run(usu_probe_thread, (void*)type, "libusual_%ld", type);
if (IS_ERR(task)) {
rc = PTR_ERR(task);
printk(KERN_WARNING "libusual: "
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index dfd42fe..98b89ea 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -38,7 +38,7 @@
#include "onetouch.h"
#include "debug.h"
-void onetouch_release_input(void *onetouch_);
+static void onetouch_release_input(void *onetouch_);
struct usb_onetouch {
char name[128];
@@ -223,7 +223,7 @@
return error;
}
-void onetouch_release_input(void *onetouch_)
+static void onetouch_release_input(void *onetouch_)
{
struct usb_onetouch *onetouch = (struct usb_onetouch *) onetouch_;
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 732bf52..a0ed889 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -44,7 +44,8 @@
* running with this patch.
* Send your submission to either Phil Dibowitz <phil@ipom.com> or
* Alan Stern <stern@rowland.harvard.edu>, and don't forget to CC: the
- * USB development list <linux-usb-devel@lists.sourceforge.net>.
+ * USB development list <linux-usb@vger.kernel.org> and the USB storage list
+ * <usb-storage@lists.one-eyed-alien.net>
*/
/* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr>
@@ -557,6 +558,13 @@
US_FL_SINGLE_LUN),
#endif
+/* Reported by Dmitry Khlystov <adminimus@gmail.com> */
+UNUSUAL_DEV( 0x04e8, 0x507c, 0x0220, 0x0220,
+ "Samsung",
+ "YP-U3",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64),
+
/* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */
UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133,
"Belkin",
@@ -1200,6 +1208,17 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_BULK32),
+/* Andrew Lunn <andrew@lunn.ch>
+ * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL
+ * on LUN 4.
+ * Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera"
+*/
+UNUSUAL_DEV( 0x0851, 0x1543, 0x0200, 0x0200,
+ "PanDigital",
+ "Photo Frame",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_NOT_LOCKABLE),
+
/* Submitted by Jan De Luyck <lkml@kcore.org> */
UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000,
"CITIZEN",
@@ -1342,6 +1361,13 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY),
+/* Reported by Rohan Hart <rohan.hart17@gmail.com> */
+UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010,
+ "INTOVA",
+ "Pixtreme",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
/*
* Entry for Jenoptik JD 5200z3
*
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index a856eff..e268aac 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -539,7 +539,8 @@
" has %s in unusual_devs.h (kernel"
" %s)\n"
" Please send a copy of this message to "
- "<linux-usb-devel@lists.sourceforge.net>\n",
+ "<linux-usb@vger.kernel.org> and "
+ "<usb-storage@lists.one-eyed-alien.net>\n",
le16_to_cpu(ddesc->idVendor),
le16_to_cpu(ddesc->idProduct),
le16_to_cpu(ddesc->bcdDevice),
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index bb1dada..2cdaf1f 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -171,7 +171,6 @@
config FB_DEFERRED_IO
bool
depends on FB
- default y
config FB_METRONOME
tristate
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 8ffdf35..b004036d 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -441,14 +441,15 @@
value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock));
- value = (value / 2) - 1;
- dev_dbg(info->device, " * programming CLKVAL = 0x%08lx\n", value);
-
- if (value <= 0) {
+ if (value < 2) {
dev_notice(info->device, "Bypassing pixel clock divider\n");
lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
} else {
- lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET);
+ value = (value / 2) - 1;
+ dev_dbg(info->device, " * programming CLKVAL = 0x%08lx\n",
+ value);
+ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1,
+ value << ATMEL_LCDC_CLKVAL_OFFSET);
info->var.pixclock = KHZ2PICOS(clk_value_khz / (2 * (value + 1)));
dev_dbg(info->device, " updated pixclk: %lu KHz\n",
PICOS2KHZ(info->var.pixclock));
diff --git a/drivers/video/bw2.c b/drivers/video/bw2.c
index 275d9da..e721644 100644
--- a/drivers/video/bw2.c
+++ b/drivers/video/bw2.c
@@ -17,11 +17,9 @@
#include <linux/init.h>
#include <linux/fb.h>
#include <linux/mm.h>
+#include <linux/of_device.h>
#include <asm/io.h>
-#include <asm/oplib.h>
-#include <asm/prom.h>
-#include <asm/of_device.h>
#include <asm/fbio.h>
#include "sbuslib.h"
@@ -299,7 +297,7 @@
par->physbase = op->resource[0].start;
par->which_io = op->resource[0].flags & IORESOURCE_BITS;
- sbusfb_fill_var(&info->var, dp->node, 1);
+ sbusfb_fill_var(&info->var, dp, 1);
linebytes = of_getintprop_default(dp, "linebytes",
info->var.xres);
@@ -329,7 +327,7 @@
if (!info->screen_base)
goto out_unmap_regs;
- bw2_blank(0, info);
+ bw2_blank(FB_BLANK_UNBLANK, info);
bw2_init_fix(info, linebytes);
diff --git a/drivers/video/cg14.c b/drivers/video/cg14.c
index 0db0fec..b17e746 100644
--- a/drivers/video/cg14.c
+++ b/drivers/video/cg14.c
@@ -17,10 +17,9 @@
#include <linux/fb.h>
#include <linux/mm.h>
#include <linux/uaccess.h>
+#include <linux/of_device.h>
#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/of_device.h>
#include <asm/fbio.h>
#include "sbuslib.h"
@@ -482,7 +481,7 @@
spin_lock_init(&par->lock);
- sbusfb_fill_var(&info->var, dp->node, 8);
+ sbusfb_fill_var(&info->var, dp, 8);
info->var.red.length = 8;
info->var.green.length = 8;
info->var.blue.length = 8;
diff --git a/drivers/video/cg3.c b/drivers/video/cg3.c
index 010ea53..3aa7b6c 100644
--- a/drivers/video/cg3.c
+++ b/drivers/video/cg3.c
@@ -17,11 +17,9 @@
#include <linux/init.h>
#include <linux/fb.h>
#include <linux/mm.h>
+#include <linux/of_device.h>
#include <asm/io.h>
-#include <asm/oplib.h>
-#include <asm/prom.h>
-#include <asm/of_device.h>
#include <asm/fbio.h>
#include "sbuslib.h"
@@ -373,7 +371,7 @@
par->physbase = op->resource[0].start;
par->which_io = op->resource[0].flags & IORESOURCE_BITS;
- sbusfb_fill_var(&info->var, dp->node, 8);
+ sbusfb_fill_var(&info->var, dp, 8);
info->var.red.length = 8;
info->var.green.length = 8;
info->var.blue.length = 8;
@@ -398,7 +396,7 @@
if (!info->screen_base)
goto out_unmap_regs;
- cg3_blank(0, info);
+ cg3_blank(FB_BLANK_UNBLANK, info);
if (!of_find_property(dp, "width", NULL)) {
err = cg3_do_default_mode(par);
diff --git a/drivers/video/cg6.c b/drivers/video/cg6.c
index fc90db6..2f64bb3 100644
--- a/drivers/video/cg6.c
+++ b/drivers/video/cg6.c
@@ -17,9 +17,9 @@
#include <linux/init.h>
#include <linux/fb.h>
#include <linux/mm.h>
+#include <linux/of_device.h>
#include <asm/io.h>
-#include <asm/of_device.h>
#include <asm/fbio.h>
#include "sbuslib.h"
@@ -728,7 +728,7 @@
par->physbase = op->resource[0].start;
par->which_io = op->resource[0].flags & IORESOURCE_BITS;
- sbusfb_fill_var(&info->var, dp->node, 8);
+ sbusfb_fill_var(&info->var, dp, 8);
info->var.red.length = 8;
info->var.green.length = 8;
info->var.blue.length = 8;
@@ -767,7 +767,7 @@
cg6_bt_init(par);
cg6_chip_init(info);
- cg6_blank(0, info);
+ cg6_blank(FB_BLANK_UNBLANK, info);
if (fb_alloc_cmap(&info->cmap, 256, 0))
goto out_unmap_regs;
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index ad31983..5fa8b76 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -1853,6 +1853,8 @@
struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]];
struct display *p = &fb_display[vc->vc_num];
int scroll_partial = info->flags & FBINFO_PARTIAL_PAN_OK;
+ unsigned short saved_ec;
+ int ret;
if (fbcon_is_inactive(vc, info))
return -EINVAL;
@@ -1865,6 +1867,11 @@
* whole screen (prevents flicker).
*/
+ saved_ec = vc->vc_video_erase_char;
+ vc->vc_video_erase_char = vc->vc_scrl_erase_char;
+
+ ret = 0;
+
switch (dir) {
case SM_UP:
if (count > vc->vc_rows) /* Maximum realistic size */
@@ -1883,7 +1890,7 @@
(b - count)),
vc->vc_scrl_erase_char,
vc->vc_size_row * count);
- return 1;
+ ret = 1;
break;
case SCROLL_WRAP_MOVE:
@@ -1955,7 +1962,8 @@
(b - count)),
vc->vc_scrl_erase_char,
vc->vc_size_row * count);
- return 1;
+ ret = 1;
+ break;
}
break;
@@ -1974,7 +1982,7 @@
t),
vc->vc_scrl_erase_char,
vc->vc_size_row * count);
- return 1;
+ ret = 1;
break;
case SCROLL_WRAP_MOVE:
@@ -2044,10 +2052,13 @@
t),
vc->vc_scrl_erase_char,
vc->vc_size_row * count);
- return 1;
+ ret = 1;
+ break;
}
+ break;
}
- return 0;
+ vc->vc_video_erase_char = saved_ec;
+ return ret;
}
@@ -2507,6 +2518,9 @@
c = vc->vc_video_erase_char;
vc->vc_video_erase_char =
((c & 0xfe00) >> 1) | (c & 0xff);
+ c = vc->vc_def_color;
+ vc->vc_scrl_erase_char =
+ ((c & 0xFE00) >> 1) | (c & 0xFF);
vc->vc_attr >>= 1;
}
} else if (!vc->vc_hi_font_mask && cnt == 512) {
@@ -2537,9 +2551,14 @@
if (vc->vc_can_do_color) {
vc->vc_video_erase_char =
((c & 0xff00) << 1) | (c & 0xff);
+ c = vc->vc_def_color;
+ vc->vc_scrl_erase_char =
+ ((c & 0xFF00) << 1) | (c & 0xFF);
vc->vc_attr <<= 1;
- } else
+ } else {
vc->vc_video_erase_char = c & ~0x100;
+ vc->vc_scrl_erase_char = c & ~0x100;
+ }
}
}
diff --git a/drivers/video/ffb.c b/drivers/video/ffb.c
index 93dca3e..7992b13 100644
--- a/drivers/video/ffb.c
+++ b/drivers/video/ffb.c
@@ -16,11 +16,10 @@
#include <linux/fb.h>
#include <linux/mm.h>
#include <linux/timer.h>
+#include <linux/of_device.h>
#include <asm/io.h>
#include <asm/upa.h>
-#include <asm/prom.h>
-#include <asm/of_device.h>
#include <asm/fbio.h>
#include "sbuslib.h"
@@ -941,7 +940,7 @@
info->screen_base = (char *) par->physbase + FFB_DFB24_POFF;
info->pseudo_palette = par->pseudo_palette;
- sbusfb_fill_var(&info->var, dp->node, 32);
+ sbusfb_fill_var(&info->var, dp, 32);
par->fbsize = PAGE_ALIGN(info->var.xres * info->var.yres * 4);
ffb_fixup_var_rgb(&info->var);
@@ -987,7 +986,7 @@
* chosen console, it will have video outputs off in
* the DAC.
*/
- ffb_blank(0, info);
+ ffb_blank(FB_BLANK_UNBLANK, info);
if (fb_alloc_cmap(&info->cmap, 256, 0))
goto out_unmap_dac;
diff --git a/drivers/video/leo.c b/drivers/video/leo.c
index f3160fc..8bc46e9 100644
--- a/drivers/video/leo.c
+++ b/drivers/video/leo.c
@@ -16,10 +16,9 @@
#include <linux/init.h>
#include <linux/fb.h>
#include <linux/mm.h>
+#include <linux/of_device.h>
#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/of_device.h>
#include <asm/fbio.h>
#include "sbuslib.h"
@@ -562,7 +561,7 @@
par->physbase = op->resource[0].start;
par->which_io = op->resource[0].flags & IORESOURCE_BITS;
- sbusfb_fill_var(&info->var, dp->node, 32);
+ sbusfb_fill_var(&info->var, dp, 32);
leo_fixup_var_rgb(&info->var);
linebytes = of_getintprop_default(dp, "linebytes",
@@ -601,7 +600,7 @@
leo_init_wids(info);
leo_init_hw(info);
- leo_blank(0, info);
+ leo_blank(FB_BLANK_UNBLANK, info);
if (fb_alloc_cmap(&info->cmap, 256, 0))
goto out_unmap_regs;
diff --git a/drivers/video/p9100.c b/drivers/video/p9100.c
index c95874f..9e90345 100644
--- a/drivers/video/p9100.c
+++ b/drivers/video/p9100.c
@@ -15,10 +15,9 @@
#include <linux/init.h>
#include <linux/fb.h>
#include <linux/mm.h>
+#include <linux/of_device.h>
#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/of_device.h>
#include <asm/fbio.h>
#include "sbuslib.h"
@@ -275,7 +274,7 @@
par->physbase = op->resource[2].start;
par->which_io = op->resource[2].flags & IORESOURCE_BITS;
- sbusfb_fill_var(&info->var, dp->node, 8);
+ sbusfb_fill_var(&info->var, dp, 8);
info->var.red.length = 8;
info->var.green.length = 8;
info->var.blue.length = 8;
@@ -295,7 +294,7 @@
if (!info->screen_base)
goto out_unmap_regs;
- p9100_blank(0, info);
+ p9100_blank(FB_BLANK_UNBLANK, info);
if (fb_alloc_cmap(&info->cmap, 256, 0))
goto out_unmap_screen;
diff --git a/drivers/video/pnx4008/pnxrgbfb.c b/drivers/video/pnx4008/pnxrgbfb.c
index 685761a..4db6b48 100644
--- a/drivers/video/pnx4008/pnxrgbfb.c
+++ b/drivers/video/pnx4008/pnxrgbfb.c
@@ -100,7 +100,6 @@
fb_dealloc_cmap(&info->cmap);
framebuffer_release(info);
platform_set_drvdata(pdev, NULL);
- kfree(info);
}
pnx4008_free_dum_channel(channel_owned, pdev->id);
@@ -168,23 +167,21 @@
ret = fb_alloc_cmap(&info->cmap, 256, 0);
if (ret < 0)
- goto err2;
+ goto err1;
ret = register_framebuffer(info);
if (ret < 0)
- goto err3;
+ goto err2;
platform_set_drvdata(pdev, info);
return 0;
-err3:
- fb_dealloc_cmap(&info->cmap);
err2:
- framebuffer_release(info);
+ fb_dealloc_cmap(&info->cmap);
err1:
pnx4008_free_dum_channel(channel_owned, pdev->id);
err0:
- kfree(info);
+ framebuffer_release(info);
err:
return ret;
}
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 3ab6e3d..48aea39 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1301,8 +1301,8 @@
}
}
-static int pxafb_decode_mach_info(struct pxafb_info *fbi,
- struct pxafb_mach_info *inf)
+static void pxafb_decode_mach_info(struct pxafb_info *fbi,
+ struct pxafb_mach_info *inf)
{
unsigned int lcd_conn = inf->lcd_conn;
@@ -1333,7 +1333,7 @@
fbi->lccr0 = inf->lccr0;
fbi->lccr3 = inf->lccr3;
fbi->lccr4 = inf->lccr4;
- return -EINVAL;
+ goto decode_mode;
}
if (lcd_conn == LCD_MONO_STN_8BPP)
@@ -1343,8 +1343,8 @@
fbi->lccr3 |= (lcd_conn & LCD_BIAS_ACTIVE_LOW) ? LCCR3_OEP : 0;
fbi->lccr3 |= (lcd_conn & LCD_PCLK_EDGE_FALL) ? LCCR3_PCP : 0;
+decode_mode:
pxafb_decode_mode_info(fbi, inf->modes, inf->num_modes);
- return 0;
}
static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev)
diff --git a/drivers/video/sbuslib.c b/drivers/video/sbuslib.c
index 4deaac0..37d764a 100644
--- a/drivers/video/sbuslib.c
+++ b/drivers/video/sbuslib.c
@@ -10,18 +10,19 @@
#include <linux/fb.h>
#include <linux/mm.h>
#include <linux/uaccess.h>
+#include <linux/of_device.h>
-#include <asm/oplib.h>
#include <asm/fbio.h>
#include "sbuslib.h"
-void sbusfb_fill_var(struct fb_var_screeninfo *var, int prom_node, int bpp)
+void sbusfb_fill_var(struct fb_var_screeninfo *var, struct device_node *dp,
+ int bpp)
{
memset(var, 0, sizeof(*var));
- var->xres = prom_getintdefault(prom_node, "width", 1152);
- var->yres = prom_getintdefault(prom_node, "height", 900);
+ var->xres = of_getintprop_default(dp, "width", 1152);
+ var->yres = of_getintprop_default(dp, "height", 900);
var->xres_virtual = var->xres;
var->yres_virtual = var->yres;
var->bits_per_pixel = bpp;
diff --git a/drivers/video/sbuslib.h b/drivers/video/sbuslib.h
index 492828c..7ba3250 100644
--- a/drivers/video/sbuslib.h
+++ b/drivers/video/sbuslib.h
@@ -11,7 +11,8 @@
#define SBUS_MMAP_FBSIZE(n) (-n)
#define SBUS_MMAP_EMPTY 0x80000000
-extern void sbusfb_fill_var(struct fb_var_screeninfo *var, int prom_node, int bpp);
+extern void sbusfb_fill_var(struct fb_var_screeninfo *var,
+ struct device_node *dp, int bpp);
struct vm_area_struct;
extern int sbusfb_mmap_helper(struct sbus_mmap_map *map,
unsigned long physbase, unsigned long fbsize,
@@ -21,6 +22,6 @@
struct fb_info *info,
int type, int fb_depth, unsigned long fb_size);
int sbusfb_compat_ioctl(struct fb_info *info, unsigned int cmd,
- unsigned long arg);
+ unsigned long arg);
#endif /* _SBUSLIB_H */
diff --git a/drivers/video/sunxvr2500.c b/drivers/video/sunxvr2500.c
index c3869a9..b1dde09 100644
--- a/drivers/video/sunxvr2500.c
+++ b/drivers/video/sunxvr2500.c
@@ -9,10 +9,9 @@
#include <linux/fb.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/of_device.h>
#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/of_device.h>
struct s3d_info {
struct fb_info *info;
diff --git a/drivers/video/sunxvr500.c b/drivers/video/sunxvr500.c
index 71bf3f1..c2ba51b 100644
--- a/drivers/video/sunxvr500.c
+++ b/drivers/video/sunxvr500.c
@@ -9,10 +9,9 @@
#include <linux/fb.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/of_device.h>
#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/of_device.h>
/* XXX This device has a 'dev-comm' property which aparently is
* XXX a pointer into the openfirmware's address space which is
diff --git a/drivers/video/tcx.c b/drivers/video/tcx.c
index a717743..2a03f78b 100644
--- a/drivers/video/tcx.c
+++ b/drivers/video/tcx.c
@@ -17,10 +17,9 @@
#include <linux/init.h>
#include <linux/fb.h>
#include <linux/mm.h>
+#include <linux/of_device.h>
#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/of_device.h>
#include <asm/fbio.h>
#include "sbuslib.h"
@@ -84,7 +83,7 @@
struct tcx_thc {
u32 thc_rev;
- u32 thc_pad0[511];
+ u32 thc_pad0[511];
u32 thc_hs; /* hsync timing */
u32 thc_hsdvs;
u32 thc_hd;
@@ -126,10 +125,10 @@
};
/* Reset control plane so that WID is 8-bit plane. */
-static void __tcx_set_control_plane (struct tcx_par *par)
+static void __tcx_set_control_plane(struct tcx_par *par)
{
u32 __iomem *p, *pend;
-
+
if (par->lowdepth)
return;
@@ -143,8 +142,8 @@
sbus_writel(tmp, p);
}
}
-
-static void tcx_reset (struct fb_info *info)
+
+static void tcx_reset(struct fb_info *info)
{
struct tcx_par *par = (struct tcx_par *) info->par;
unsigned long flags;
@@ -365,7 +364,8 @@
info->screen_base, par->fbsize);
}
-static int __devinit tcx_init_one(struct of_device *op)
+static int __devinit tcx_probe(struct of_device *op,
+ const struct of_device_id *match)
{
struct device_node *dp = op->node;
struct fb_info *info;
@@ -384,7 +384,7 @@
par->lowdepth =
(of_find_property(dp, "tcx-8-bit", NULL) != NULL);
- sbusfb_fill_var(&info->var, dp->node, 8);
+ sbusfb_fill_var(&info->var, dp, 8);
info->var.red.length = 8;
info->var.green.length = 8;
info->var.blue.length = 8;
@@ -488,13 +488,6 @@
return err;
}
-static int __devinit tcx_probe(struct of_device *dev, const struct of_device_id *match)
-{
- struct of_device *op = to_of_device(&dev->dev);
-
- return tcx_init_one(op);
-}
-
static int __devexit tcx_remove(struct of_device *op)
{
struct fb_info *info = dev_get_drvdata(&op->dev);
diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index bd54cd0..beefab2 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -27,7 +27,6 @@
#define VERSION "0.7.8-NEWAPI"
struct tridentfb_par {
- int vclk; /* in MHz */
void __iomem *io_virt; /* iospace virtual memory address */
};
@@ -669,27 +668,26 @@
(read3X4(CRTHiOrd) & 0xF8) | ((base & 0xE0000) >> 17));
}
-/* Use 20.12 fixed-point for NTSC value and frequency calculation */
-#define calc_freq(n, m, k) ( ((unsigned long)0xE517 * (n + 8) / ((m + 2) * (1 << k))) >> 12 )
-
/* Set dotclock frequency */
-static void set_vclk(int freq)
+static void set_vclk(unsigned long freq)
{
int m, n, k;
- int f, fi, d, di;
+ unsigned long f, fi, d, di;
unsigned char lo = 0, hi = 0;
- d = 20;
+ d = 20000;
for (k = 2; k >= 0; k--)
for (m = 0; m < 63; m++)
for (n = 0; n < 128; n++) {
- fi = calc_freq(n, m, k);
+ fi = ((14318l * (n + 8)) / (m + 2)) >> k;
if ((di = abs(fi - freq)) < d) {
d = di;
f = fi;
lo = n;
hi = (k << 6) | m;
}
+ if (fi > freq)
+ break;
}
if (chip3D) {
write3C4(ClockHigh, hi);
@@ -888,6 +886,8 @@
struct fb_var_screeninfo *var = &info->var;
int bpp = var->bits_per_pixel;
unsigned char tmp;
+ unsigned long vclk;
+
debug("enter\n");
hdispend = var->xres / 8 - 1;
hsyncstart = (var->xres + var->right_margin) / 8;
@@ -905,7 +905,6 @@
vblankstart = var->yres;
vblankend = vtotal + 2;
- enable_mmio();
crtc_unlock();
write3CE(CyberControl, 8);
@@ -1015,11 +1014,11 @@
write3X4(Performance, 0x92);
write3X4(PCIReg, 0x07); /* MMIO & PCI read and write burst enable */
- /* convert from picoseconds to MHz */
- par->vclk = 1000000 / info->var.pixclock;
+ /* convert from picoseconds to kHz */
+ vclk = PICOS2KHZ(info->var.pixclock);
if (bpp == 32)
- par->vclk *= 2;
- set_vclk(par->vclk);
+ vclk *= 2;
+ set_vclk(vclk);
write3C4(0, 3);
write3C4(1, 1); /* set char clock 8 dots wide */
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index b535483..1386678 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -80,19 +80,51 @@
dev->config->set_status(dev, dev->config->get_status(dev) | status);
}
+void virtio_check_driver_offered_feature(const struct virtio_device *vdev,
+ unsigned int fbit)
+{
+ unsigned int i;
+ struct virtio_driver *drv = container_of(vdev->dev.driver,
+ struct virtio_driver, driver);
+
+ for (i = 0; i < drv->feature_table_size; i++)
+ if (drv->feature_table[i] == fbit)
+ return;
+ BUG();
+}
+EXPORT_SYMBOL_GPL(virtio_check_driver_offered_feature);
+
static int virtio_dev_probe(struct device *_d)
{
- int err;
+ int err, i;
struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
struct virtio_driver *drv = container_of(dev->dev.driver,
struct virtio_driver, driver);
+ u32 device_features;
+ /* We have a driver! */
add_status(dev, VIRTIO_CONFIG_S_DRIVER);
+
+ /* Figure out what features the device supports. */
+ device_features = dev->config->get_features(dev);
+
+ /* Features supported by both device and driver into dev->features. */
+ memset(dev->features, 0, sizeof(dev->features));
+ for (i = 0; i < drv->feature_table_size; i++) {
+ unsigned int f = drv->feature_table[i];
+ BUG_ON(f >= 32);
+ if (device_features & (1 << f))
+ set_bit(f, dev->features);
+ }
+
err = drv->probe(dev);
if (err)
add_status(dev, VIRTIO_CONFIG_S_FAILED);
- else
+ else {
add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
+ /* They should never have set feature bits beyond 32 */
+ dev->config->set_features(dev, dev->features[0]);
+ }
return err;
}
@@ -114,6 +146,8 @@
int register_virtio_driver(struct virtio_driver *driver)
{
+ /* Catch this early. */
+ BUG_ON(driver->feature_table_size && !driver->feature_table);
driver->driver.bus = &virtio_bus;
driver->driver.probe = virtio_dev_probe;
driver->driver.remove = virtio_dev_remove;
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 0b3efc3..bfef604 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -155,9 +155,9 @@
static inline s64 towards_target(struct virtio_balloon *vb)
{
u32 v;
- __virtio_config_val(vb->vdev,
- offsetof(struct virtio_balloon_config, num_pages),
- &v);
+ vb->vdev->config->get(vb->vdev,
+ offsetof(struct virtio_balloon_config, num_pages),
+ &v, sizeof(v));
return v - vb->num_pages;
}
@@ -227,7 +227,7 @@
}
vb->tell_host_first
- = vdev->config->feature(vdev, VIRTIO_BALLOON_F_MUST_TELL_HOST);
+ = virtio_has_feature(vdev, VIRTIO_BALLOON_F_MUST_TELL_HOST);
return 0;
@@ -259,7 +259,11 @@
kfree(vb);
}
+static unsigned int features[] = { VIRTIO_BALLOON_F_MUST_TELL_HOST };
+
static struct virtio_driver virtio_balloon = {
+ .feature_table = features,
+ .feature_table_size = ARRAY_SIZE(features),
.driver.name = KBUILD_MODNAME,
.driver.owner = THIS_MODULE,
.id_table = id_table,
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index c0df924..27e9fc9 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -87,23 +87,22 @@
return container_of(vdev, struct virtio_pci_device, vdev);
}
-/* virtio config->feature() implementation */
-static bool vp_feature(struct virtio_device *vdev, unsigned bit)
+/* virtio config->get_features() implementation */
+static u32 vp_get_features(struct virtio_device *vdev)
{
struct virtio_pci_device *vp_dev = to_vp_device(vdev);
- u32 mask;
- /* Since this function is supposed to have the side effect of
- * enabling a queried feature, we simulate that by doing a read
- * from the host feature bitmask and then writing to the guest
- * feature bitmask */
- mask = ioread32(vp_dev->ioaddr + VIRTIO_PCI_HOST_FEATURES);
- if (mask & (1 << bit)) {
- mask |= (1 << bit);
- iowrite32(mask, vp_dev->ioaddr + VIRTIO_PCI_GUEST_FEATURES);
- }
+ /* When someone needs more than 32 feature bits, we'll need to
+ * steal a bit to indicate that the rest are somewhere else. */
+ return ioread32(vp_dev->ioaddr + VIRTIO_PCI_HOST_FEATURES);
+}
- return !!(mask & (1 << bit));
+/* virtio config->set_features() implementation */
+static void vp_set_features(struct virtio_device *vdev, u32 features)
+{
+ struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+
+ iowrite32(features, vp_dev->ioaddr + VIRTIO_PCI_GUEST_FEATURES);
}
/* virtio config->get() implementation */
@@ -145,14 +144,14 @@
struct virtio_pci_device *vp_dev = to_vp_device(vdev);
/* We should never be setting status to 0. */
BUG_ON(status == 0);
- return iowrite8(status, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
+ iowrite8(status, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
}
static void vp_reset(struct virtio_device *vdev)
{
struct virtio_pci_device *vp_dev = to_vp_device(vdev);
/* 0 status means a reset. */
- return iowrite8(0, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
+ iowrite8(0, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
}
/* the notify function used when creating a virt queue */
@@ -293,7 +292,6 @@
}
static struct virtio_config_ops virtio_pci_config_ops = {
- .feature = vp_feature,
.get = vp_get,
.set = vp_set,
.get_status = vp_get_status,
@@ -301,6 +299,8 @@
.reset = vp_reset,
.find_vq = vp_find_vq,
.del_vq = vp_del_vq,
+ .get_features = vp_get_features,
+ .set_features = vp_set_features,
};
/* the PCI probing function */
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index c2fa5c6..937a49d 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -184,6 +184,11 @@
START_USE(vq);
+ if (unlikely(vq->broken)) {
+ END_USE(vq);
+ return NULL;
+ }
+
if (!more_used(vq)) {
pr_debug("No more buffers in queue\n");
END_USE(vq);
diff --git a/fs/affs/affs.h b/fs/affs/affs.h
index d5bd497a..223b191 100644
--- a/fs/affs/affs.h
+++ b/fs/affs/affs.h
@@ -48,7 +48,7 @@
* affs fs inode data in memory
*/
struct affs_inode_info {
- u32 i_opencnt;
+ atomic_t i_opencnt;
struct semaphore i_link_lock; /* Protects internal inode access. */
struct semaphore i_ext_lock; /* Protects internal inode access. */
#define i_hash_lock i_ext_lock
@@ -170,8 +170,6 @@
extern unsigned long affs_parent_ino(struct inode *dir);
extern struct inode *affs_new_inode(struct inode *dir);
extern int affs_notify_change(struct dentry *dentry, struct iattr *attr);
-extern void affs_put_inode(struct inode *inode);
-extern void affs_drop_inode(struct inode *inode);
extern void affs_delete_inode(struct inode *inode);
extern void affs_clear_inode(struct inode *inode);
extern struct inode *affs_iget(struct super_block *sb,
diff --git a/fs/affs/file.c b/fs/affs/file.c
index 1a4f092..6eac7bd 100644
--- a/fs/affs/file.c
+++ b/fs/affs/file.c
@@ -48,8 +48,9 @@
{
if (atomic_read(&filp->f_count) != 1)
return 0;
- pr_debug("AFFS: open(%d)\n", AFFS_I(inode)->i_opencnt);
- AFFS_I(inode)->i_opencnt++;
+ pr_debug("AFFS: open(%lu,%d)\n",
+ inode->i_ino, atomic_read(&AFFS_I(inode)->i_opencnt));
+ atomic_inc(&AFFS_I(inode)->i_opencnt);
return 0;
}
@@ -58,10 +59,16 @@
{
if (atomic_read(&filp->f_count) != 0)
return 0;
- pr_debug("AFFS: release(%d)\n", AFFS_I(inode)->i_opencnt);
- AFFS_I(inode)->i_opencnt--;
- if (!AFFS_I(inode)->i_opencnt)
+ pr_debug("AFFS: release(%lu, %d)\n",
+ inode->i_ino, atomic_read(&AFFS_I(inode)->i_opencnt));
+
+ if (atomic_dec_and_test(&AFFS_I(inode)->i_opencnt)) {
+ mutex_lock(&inode->i_mutex);
+ if (inode->i_size != AFFS_I(inode)->mmu_private)
+ affs_truncate(inode);
affs_free_prealloc(inode);
+ mutex_unlock(&inode->i_mutex);
+ }
return 0;
}
@@ -180,7 +187,7 @@
/* inline the simplest case: same extended block as last time */
struct buffer_head *bh = AFFS_I(inode)->i_ext_bh;
if (ext == AFFS_I(inode)->i_ext_last)
- atomic_inc(&bh->b_count);
+ get_bh(bh);
else
/* we have to do more (not inlined) */
bh = affs_get_extblock_slow(inode, ext);
@@ -306,7 +313,7 @@
affs_brelse(AFFS_I(inode)->i_ext_bh);
AFFS_I(inode)->i_ext_last = ext;
AFFS_I(inode)->i_ext_bh = bh;
- atomic_inc(&bh->b_count);
+ get_bh(bh);
return bh;
@@ -324,7 +331,6 @@
pr_debug("AFFS: get_block(%u, %lu)\n", (u32)inode->i_ino, (unsigned long)block);
-
BUG_ON(block > (sector_t)0x7fffffffUL);
if (block >= AFFS_I(inode)->i_blkcnt) {
@@ -827,6 +833,8 @@
res = mapping->a_ops->write_begin(NULL, mapping, size, 0, 0, &page, &fsdata);
if (!res)
res = mapping->a_ops->write_end(NULL, mapping, size, 0, 0, page, fsdata);
+ else
+ inode->i_size = AFFS_I(inode)->mmu_private;
mark_inode_dirty(inode);
return;
} else if (inode->i_size == AFFS_I(inode)->mmu_private)
@@ -862,6 +870,7 @@
blk++;
} else
AFFS_HEAD(ext_bh)->first_data = 0;
+ AFFS_HEAD(ext_bh)->block_count = cpu_to_be32(i);
size = AFFS_SB(sb)->s_hashsize;
if (size > blkcnt - blk + i)
size = blkcnt - blk + i;
diff --git a/fs/affs/inode.c b/fs/affs/inode.c
index 27fe6cb..a13b334a 100644
--- a/fs/affs/inode.c
+++ b/fs/affs/inode.c
@@ -58,7 +58,7 @@
AFFS_I(inode)->i_extcnt = 1;
AFFS_I(inode)->i_ext_last = ~1;
AFFS_I(inode)->i_protect = prot;
- AFFS_I(inode)->i_opencnt = 0;
+ atomic_set(&AFFS_I(inode)->i_opencnt, 0);
AFFS_I(inode)->i_blkcnt = 0;
AFFS_I(inode)->i_lc = NULL;
AFFS_I(inode)->i_lc_size = 0;
@@ -108,8 +108,6 @@
inode->i_mode |= S_IFDIR;
} else
inode->i_mode = S_IRUGO | S_IXUGO | S_IWUSR | S_IFDIR;
- if (tail->link_chain)
- inode->i_nlink = 2;
/* Maybe it should be controlled by mount parameter? */
//inode->i_mode |= S_ISVTX;
inode->i_op = &affs_dir_inode_operations;
@@ -245,31 +243,12 @@
}
void
-affs_put_inode(struct inode *inode)
-{
- pr_debug("AFFS: put_inode(ino=%lu, nlink=%u)\n", inode->i_ino, inode->i_nlink);
- affs_free_prealloc(inode);
-}
-
-void
-affs_drop_inode(struct inode *inode)
-{
- mutex_lock(&inode->i_mutex);
- if (inode->i_size != AFFS_I(inode)->mmu_private)
- affs_truncate(inode);
- mutex_unlock(&inode->i_mutex);
-
- generic_drop_inode(inode);
-}
-
-void
affs_delete_inode(struct inode *inode)
{
pr_debug("AFFS: delete_inode(ino=%lu, nlink=%u)\n", inode->i_ino, inode->i_nlink);
truncate_inode_pages(&inode->i_data, 0);
inode->i_size = 0;
- if (S_ISREG(inode->i_mode))
- affs_truncate(inode);
+ affs_truncate(inode);
clear_inode(inode);
affs_free_block(inode->i_sb, inode->i_ino);
}
@@ -277,9 +256,12 @@
void
affs_clear_inode(struct inode *inode)
{
- unsigned long cache_page = (unsigned long) AFFS_I(inode)->i_lc;
+ unsigned long cache_page;
pr_debug("AFFS: clear_inode(ino=%lu, nlink=%u)\n", inode->i_ino, inode->i_nlink);
+
+ affs_free_prealloc(inode);
+ cache_page = (unsigned long)AFFS_I(inode)->i_lc;
if (cache_page) {
pr_debug("AFFS: freeing ext cache\n");
AFFS_I(inode)->i_lc = NULL;
@@ -316,7 +298,7 @@
inode->i_ino = block;
inode->i_nlink = 1;
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC;
- AFFS_I(inode)->i_opencnt = 0;
+ atomic_set(&AFFS_I(inode)->i_opencnt, 0);
AFFS_I(inode)->i_blkcnt = 0;
AFFS_I(inode)->i_lc = NULL;
AFFS_I(inode)->i_lc_size = 0;
@@ -369,12 +351,12 @@
switch (type) {
case ST_LINKFILE:
case ST_LINKDIR:
- inode_bh = bh;
retval = -ENOSPC;
block = affs_alloc_block(dir, dir->i_ino);
if (!block)
goto err;
retval = -EIO;
+ inode_bh = bh;
bh = affs_getzeroblk(sb, block);
if (!bh)
goto err;
diff --git a/fs/affs/namei.c b/fs/affs/namei.c
index 2218f1e..cfcf1b6 100644
--- a/fs/affs/namei.c
+++ b/fs/affs/namei.c
@@ -234,7 +234,8 @@
int
affs_unlink(struct inode *dir, struct dentry *dentry)
{
- pr_debug("AFFS: unlink(dir=%d, \"%.*s\")\n", (u32)dir->i_ino,
+ pr_debug("AFFS: unlink(dir=%d, %lu \"%.*s\")\n", (u32)dir->i_ino,
+ dentry->d_inode->i_ino,
(int)dentry->d_name.len, dentry->d_name.name);
return affs_remove_header(dentry);
@@ -302,7 +303,8 @@
int
affs_rmdir(struct inode *dir, struct dentry *dentry)
{
- pr_debug("AFFS: rmdir(dir=%u, \"%.*s\")\n", (u32)dir->i_ino,
+ pr_debug("AFFS: rmdir(dir=%u, %lu \"%.*s\")\n", (u32)dir->i_ino,
+ dentry->d_inode->i_ino,
(int)dentry->d_name.len, dentry->d_name.name);
return affs_remove_header(dentry);
diff --git a/fs/affs/super.c b/fs/affs/super.c
index 01d25d532..d214837 100644
--- a/fs/affs/super.c
+++ b/fs/affs/super.c
@@ -71,12 +71,18 @@
static struct inode *affs_alloc_inode(struct super_block *sb)
{
- struct affs_inode_info *ei;
- ei = (struct affs_inode_info *)kmem_cache_alloc(affs_inode_cachep, GFP_KERNEL);
- if (!ei)
+ struct affs_inode_info *i;
+
+ i = kmem_cache_alloc(affs_inode_cachep, GFP_KERNEL);
+ if (!i)
return NULL;
- ei->vfs_inode.i_version = 1;
- return &ei->vfs_inode;
+
+ i->vfs_inode.i_version = 1;
+ i->i_lc = NULL;
+ i->i_ext_bh = NULL;
+ i->i_pa_cnt = 0;
+
+ return &i->vfs_inode;
}
static void affs_destroy_inode(struct inode *inode)
@@ -114,8 +120,6 @@
.alloc_inode = affs_alloc_inode,
.destroy_inode = affs_destroy_inode,
.write_inode = affs_write_inode,
- .put_inode = affs_put_inode,
- .drop_inode = affs_drop_inode,
.delete_inode = affs_delete_inode,
.clear_inode = affs_clear_inode,
.put_super = affs_put_super,
diff --git a/fs/anon_inodes.c b/fs/anon_inodes.c
index f42be06..977ef20 100644
--- a/fs/anon_inodes.c
+++ b/fs/anon_inodes.c
@@ -57,9 +57,6 @@
* anonymous inode, and a dentry that describe the "class"
* of the file
*
- * @pfd: [out] pointer to the file descriptor
- * @dpinode: [out] pointer to the inode
- * @pfile: [out] pointer to the file struct
* @name: [in] name of the "class" of the new file
* @fops [in] file operations for the new file
* @priv [in] private data for the new file (will be file's private_data)
@@ -68,10 +65,9 @@
* that do not need to have a full-fledged inode in order to operate correctly.
* All the files created with anon_inode_getfd() will share a single inode,
* hence saving memory and avoiding code duplication for the file/inode/dentry
- * setup.
+ * setup. Returns new descriptor or -error.
*/
-int anon_inode_getfd(int *pfd, struct inode **pinode, struct file **pfile,
- const char *name, const struct file_operations *fops,
+int anon_inode_getfd(const char *name, const struct file_operations *fops,
void *priv)
{
struct qstr this;
@@ -125,10 +121,7 @@
fd_install(fd, file);
- *pfd = fd;
- *pinode = anon_inode_inode;
- *pfile = file;
- return 0;
+ return fd;
err_dput:
dput(dentry);
diff --git a/fs/autofs4/expire.c b/fs/autofs4/expire.c
index d96e5c1..894fee54 100644
--- a/fs/autofs4/expire.c
+++ b/fs/autofs4/expire.c
@@ -73,8 +73,8 @@
status = 0;
done:
DPRINTK("returning = %d", status);
- mntput(mnt);
dput(dentry);
+ mntput(mnt);
return status;
}
@@ -333,7 +333,7 @@
/* Can we expire this guy */
if (autofs4_can_expire(dentry, timeout, do_now)) {
expired = dentry;
- break;
+ goto found;
}
goto next;
}
@@ -352,7 +352,7 @@
inf->flags |= AUTOFS_INF_EXPIRING;
spin_unlock(&sbi->fs_lock);
expired = dentry;
- break;
+ goto found;
}
spin_unlock(&sbi->fs_lock);
/*
@@ -363,7 +363,7 @@
expired = autofs4_check_leaves(mnt, dentry, timeout, do_now);
if (expired) {
dput(dentry);
- break;
+ goto found;
}
}
next:
@@ -371,18 +371,16 @@
spin_lock(&dcache_lock);
next = next->next;
}
-
- if (expired) {
- DPRINTK("returning %p %.*s",
- expired, (int)expired->d_name.len, expired->d_name.name);
- spin_lock(&dcache_lock);
- list_move(&expired->d_parent->d_subdirs, &expired->d_u.d_child);
- spin_unlock(&dcache_lock);
- return expired;
- }
spin_unlock(&dcache_lock);
-
return NULL;
+
+found:
+ DPRINTK("returning %p %.*s",
+ expired, (int)expired->d_name.len, expired->d_name.name);
+ spin_lock(&dcache_lock);
+ list_move(&expired->d_parent->d_subdirs, &expired->d_u.d_child);
+ spin_unlock(&dcache_lock);
+ return expired;
}
/* Perform an expiry operation */
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index aa4c5ff..edf5b6b 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -146,17 +146,17 @@
if (d_mountpoint(dentry)) {
struct file *fp = NULL;
- struct vfsmount *fp_mnt = mntget(mnt);
- struct dentry *fp_dentry = dget(dentry);
+ struct path fp_path = { .dentry = dentry, .mnt = mnt };
- if (!autofs4_follow_mount(&fp_mnt, &fp_dentry)) {
- dput(fp_dentry);
- mntput(fp_mnt);
+ path_get(&fp_path);
+
+ if (!autofs4_follow_mount(&fp_path.mnt, &fp_path.dentry)) {
+ path_put(&fp_path);
dcache_dir_close(inode, file);
goto out;
}
- fp = dentry_open(fp_dentry, fp_mnt, file->f_flags);
+ fp = dentry_open(fp_path.dentry, fp_path.mnt, file->f_flags);
status = PTR_ERR(fp);
if (IS_ERR(fp)) {
dcache_dir_close(inode, file);
@@ -242,7 +242,8 @@
{
struct autofs_sb_info *sbi = autofs4_sbi(dentry->d_sb);
struct autofs_info *ino = autofs4_dentry_ino(dentry);
- int status = 0;
+ struct dentry *new;
+ int status;
/* Block on any pending expiry here; invalidate the dentry
when expiration is done to trigger mount request with a new
@@ -318,7 +319,28 @@
spin_lock(&dentry->d_lock);
dentry->d_flags &= ~DCACHE_AUTOFS_PENDING;
spin_unlock(&dentry->d_lock);
- return status;
+
+ /*
+ * The dentry that is passed in from lookup may not be the one
+ * we end up using, as mkdir can create a new one. If this
+ * happens, and another process tries the lookup at the same time,
+ * it will set the PENDING flag on this new dentry, but add itself
+ * to our waitq. Then, if after the lookup succeeds, the first
+ * process that requested the mount performs another lookup of the
+ * same directory, it will show up as still pending! So, we need
+ * to redo the lookup here and clear pending on that dentry.
+ */
+ if (d_unhashed(dentry)) {
+ new = d_lookup(dentry->d_parent, &dentry->d_name);
+ if (new) {
+ spin_lock(&new->d_lock);
+ new->d_flags &= ~DCACHE_AUTOFS_PENDING;
+ spin_unlock(&new->d_lock);
+ dput(new);
+ }
+ }
+
+ return 0;
}
/* For autofs direct mounts the follow link triggers the mount */
diff --git a/fs/autofs4/waitq.c b/fs/autofs4/waitq.c
index 1fe28e4..75e5955 100644
--- a/fs/autofs4/waitq.c
+++ b/fs/autofs4/waitq.c
@@ -171,7 +171,7 @@
for (tmp = dentry ; tmp != root ; tmp = tmp->d_parent)
len += tmp->d_name.len + 1;
- if (--len > NAME_MAX) {
+ if (!len || --len > NAME_MAX) {
spin_unlock(&dcache_lock);
return 0;
}
diff --git a/fs/bio.c b/fs/bio.c
index 799f86de..7856257 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -158,7 +158,7 @@
bio_init(bio);
if (likely(nr_iovecs)) {
- unsigned long idx = 0; /* shut up gcc */
+ unsigned long uninitialized_var(idx);
bvl = bvec_alloc_bs(gfp_mask, nr_iovecs, &idx, bs);
if (unlikely(!bvl)) {
@@ -963,6 +963,7 @@
* @data: pointer to buffer to copy
* @len: length in bytes
* @gfp_mask: allocation flags for bio and page allocation
+ * @reading: data direction is READ
*
* copy the kernel address into a bio suitable for io to a block
* device. Returns an error pointer in case of error.
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 05c9da6..8355e91 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,3 +1,6 @@
+Version 1.53
+------------
+
Version 1.52
------------
Fix oops on second mount to server when null auth is used.
diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c
index bcda2c6..cb52cbb 100644
--- a/fs/cifs/asn1.c
+++ b/fs/cifs/asn1.c
@@ -460,8 +460,8 @@
unsigned char *sequence_end;
unsigned long *oid = NULL;
unsigned int cls, con, tag, oidlen, rc;
- int use_ntlmssp = FALSE;
- int use_kerberos = FALSE;
+ bool use_ntlmssp = false;
+ bool use_kerberos = false;
*secType = NTLM; /* BB eventually make Kerberos or NLTMSSP the default*/
@@ -561,15 +561,15 @@
if (compare_oid(oid, oidlen,
MSKRB5_OID,
MSKRB5_OID_LEN))
- use_kerberos = TRUE;
+ use_kerberos = true;
else if (compare_oid(oid, oidlen,
KRB5_OID,
KRB5_OID_LEN))
- use_kerberos = TRUE;
+ use_kerberos = true;
else if (compare_oid(oid, oidlen,
NTLMSSP_OID,
NTLMSSP_OID_LEN))
- use_ntlmssp = TRUE;
+ use_ntlmssp = true;
kfree(oid);
}
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index 95024c0..f6fdecf 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -93,15 +93,11 @@
/* find sharename end */
pSep++;
pSep = memchr(UNC+(pSep-UNC), '\\', len-(pSep-UNC));
- if (!pSep) {
- cERROR(1, ("%s:2 cant find share name in node name: %s",
- __func__, node_name));
- kfree(UNC);
- return NULL;
+ if (pSep) {
+ /* trim path up to sharename end
+ * now we have share name in UNC */
+ *pSep = 0;
}
- /* trim path up to sharename end
- * * now we have share name in UNC */
- *pSep = 0;
return UNC;
}
@@ -188,7 +184,7 @@
tkn_e = strchr(tkn_e+1, '\\');
if (tkn_e) {
strcat(mountdata, ",prefixpath=");
- strcat(mountdata, tkn_e);
+ strcat(mountdata, tkn_e+1);
}
}
@@ -244,7 +240,8 @@
return NULL;
if (cifs_sb->tcon->Flags & SMB_SHARE_IS_IN_DFS) {
- /* we should use full path name to correct working with DFS */
+ int i;
+ /* we should use full path name for correct working with DFS */
l_max_len = strnlen(cifs_sb->tcon->treeName, MAX_TREE_SIZE+1) +
strnlen(search_path, MAX_PATHCONF) + 1;
tmp_path = kmalloc(l_max_len, GFP_KERNEL);
@@ -253,8 +250,14 @@
return NULL;
}
strncpy(tmp_path, cifs_sb->tcon->treeName, l_max_len);
- strcat(tmp_path, search_path);
tmp_path[l_max_len-1] = 0;
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)
+ for (i = 0; i < l_max_len; i++) {
+ if (tmp_path[i] == '\\')
+ tmp_path[i] = '/';
+ }
+ strncat(tmp_path, search_path, l_max_len - strlen(tmp_path));
+
full_path = tmp_path;
kfree(search_path);
} else {
diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index e99d4fa..34902cf 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -559,7 +559,7 @@
const char *path, const __u16 *pfid)
{
struct cifsFileInfo *open_file = NULL;
- int unlock_file = FALSE;
+ bool unlock_file = false;
int xid;
int rc = -EIO;
__u16 fid;
@@ -586,10 +586,10 @@
cifs_sb = CIFS_SB(sb);
if (open_file) {
- unlock_file = TRUE;
+ unlock_file = true;
fid = open_file->netfid;
} else if (pfid == NULL) {
- int oplock = FALSE;
+ int oplock = 0;
/* open file */
rc = CIFSSMBOpen(xid, cifs_sb->tcon, path, FILE_OPEN,
READ_CONTROL, 0, &fid, &oplock, NULL,
@@ -604,7 +604,7 @@
rc = CIFSSMBGetCIFSACL(xid, cifs_sb->tcon, fid, &pntsd, pacllen);
cFYI(1, ("GetCIFSACL rc = %d ACL len %d", rc, *pacllen));
- if (unlock_file == TRUE) /* find_readable_file increments ref count */
+ if (unlock_file == true) /* find_readable_file increments ref count */
atomic_dec(&open_file->wrtPending);
else if (pfid == NULL) /* if opened above we have to close the handle */
CIFSSMBClose(xid, cifs_sb->tcon, fid);
@@ -619,7 +619,7 @@
struct inode *inode, const char *path)
{
struct cifsFileInfo *open_file;
- int unlock_file = FALSE;
+ bool unlock_file = false;
int xid;
int rc = -EIO;
__u16 fid;
@@ -640,10 +640,10 @@
open_file = find_readable_file(CIFS_I(inode));
if (open_file) {
- unlock_file = TRUE;
+ unlock_file = true;
fid = open_file->netfid;
} else {
- int oplock = FALSE;
+ int oplock = 0;
/* open file */
rc = CIFSSMBOpen(xid, cifs_sb->tcon, path, FILE_OPEN,
WRITE_DAC, 0, &fid, &oplock, NULL,
@@ -658,7 +658,7 @@
rc = CIFSSMBSetCIFSACL(xid, cifs_sb->tcon, fid, pnntsd, acllen);
cFYI(DBG2, ("SetCIFSACL rc = %d", rc));
- if (unlock_file == TRUE)
+ if (unlock_file)
atomic_dec(&open_file->wrtPending);
else
CIFSSMBClose(xid, cifs_sb->tcon, fid);
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 39c2cbd..427a7c6 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -222,50 +222,50 @@
cifs_statfs(struct dentry *dentry, struct kstatfs *buf)
{
struct super_block *sb = dentry->d_sb;
- int xid;
+ struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
+ struct cifsTconInfo *tcon = cifs_sb->tcon;
int rc = -EOPNOTSUPP;
- struct cifs_sb_info *cifs_sb;
- struct cifsTconInfo *pTcon;
+ int xid;
xid = GetXid();
- cifs_sb = CIFS_SB(sb);
- pTcon = cifs_sb->tcon;
-
buf->f_type = CIFS_MAGIC_NUMBER;
- /* instead could get the real value via SMB_QUERY_FS_ATTRIBUTE_INFO */
- buf->f_namelen = PATH_MAX; /* PATH_MAX may be too long - it would
- presumably be total path, but note
- that some servers (includinng Samba 3)
- have a shorter maximum path */
+ /*
+ * PATH_MAX may be too long - it would presumably be total path,
+ * but note that some servers (includinng Samba 3) have a shorter
+ * maximum path.
+ *
+ * Instead could get the real value via SMB_QUERY_FS_ATTRIBUTE_INFO.
+ */
+ buf->f_namelen = PATH_MAX;
buf->f_files = 0; /* undefined */
buf->f_ffree = 0; /* unlimited */
-/* BB we could add a second check for a QFS Unix capability bit */
-/* BB FIXME check CIFS_POSIX_EXTENSIONS Unix cap first FIXME BB */
- if ((pTcon->ses->capabilities & CAP_UNIX) && (CIFS_POSIX_EXTENSIONS &
- le64_to_cpu(pTcon->fsUnixInfo.Capability)))
- rc = CIFSSMBQFSPosixInfo(xid, pTcon, buf);
+ /*
+ * We could add a second check for a QFS Unix capability bit
+ */
+ if ((tcon->ses->capabilities & CAP_UNIX) &&
+ (CIFS_POSIX_EXTENSIONS & le64_to_cpu(tcon->fsUnixInfo.Capability)))
+ rc = CIFSSMBQFSPosixInfo(xid, tcon, buf);
- /* Only need to call the old QFSInfo if failed
- on newer one */
- if (rc)
- if (pTcon->ses->capabilities & CAP_NT_SMBS)
- rc = CIFSSMBQFSInfo(xid, pTcon, buf); /* not supported by OS2 */
+ /*
+ * Only need to call the old QFSInfo if failed on newer one,
+ * e.g. by OS/2.
+ **/
+ if (rc && (tcon->ses->capabilities & CAP_NT_SMBS))
+ rc = CIFSSMBQFSInfo(xid, tcon, buf);
- /* Some old Windows servers also do not support level 103, retry with
- older level one if old server failed the previous call or we
- bypassed it because we detected that this was an older LANMAN sess */
+ /*
+ * Some old Windows servers also do not support level 103, retry with
+ * older level one if old server failed the previous call or we
+ * bypassed it because we detected that this was an older LANMAN sess
+ */
if (rc)
- rc = SMBOldQFSInfo(xid, pTcon, buf);
- /* int f_type;
- __fsid_t f_fsid;
- int f_namelen; */
- /* BB get from info in tcon struct at mount time call to QFSAttrInfo */
+ rc = SMBOldQFSInfo(xid, tcon, buf);
+
FreeXid(xid);
- return 0; /* always return success? what if volume is no
- longer available? */
+ return 0;
}
static int cifs_permission(struct inode *inode, int mask, struct nameidata *nd)
@@ -306,8 +306,8 @@
/* Until the file is open and we have gotten oplock
info back from the server, can not assume caching of
file data or metadata */
- cifs_inode->clientCanCacheRead = FALSE;
- cifs_inode->clientCanCacheAll = FALSE;
+ cifs_inode->clientCanCacheRead = false;
+ cifs_inode->clientCanCacheAll = false;
cifs_inode->vfs_inode.i_blkbits = 14; /* 2**14 = CIFS_MAX_MSGSIZE */
/* Can not set i_flags here - they get immediately overwritten
@@ -940,7 +940,7 @@
rc = CIFSSMBLock(0, pTcon, netfid,
0 /* len */ , 0 /* offset */, 0,
0, LOCKING_ANDX_OPLOCK_RELEASE,
- 0 /* wait flag */);
+ false /* wait flag */);
cFYI(1, ("Oplock release rc = %d", rc));
}
} else
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index e1dd9f3..cd1301a0 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -24,14 +24,6 @@
#define ROOT_I 2
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-
extern struct file_system_type cifs_fs_type;
extern const struct address_space_operations cifs_addr_ops;
extern const struct address_space_operations cifs_addr_ops_smallbuf;
@@ -110,5 +102,5 @@
extern const struct export_operations cifs_export_ops;
#endif /* EXPERIMENTAL */
-#define CIFS_VERSION "1.52"
+#define CIFS_VERSION "1.53"
#endif /* _CIFSFS_H */
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 69a2e19..b7d9f69 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -57,14 +57,6 @@
#include "cifspdu.h"
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-
#ifndef XATTR_DOS_ATTRIB
#define XATTR_DOS_ATTRIB "user.DOSATTRIB"
#endif
@@ -147,7 +139,7 @@
enum protocolEnum protocolType;
char versionMajor;
char versionMinor;
- unsigned svlocal:1; /* local server or remote */
+ bool svlocal:1; /* local server or remote */
atomic_t socketUseCount; /* number of open cifs sessions on socket */
atomic_t inFlight; /* number of requests on the wire to server */
#ifdef CONFIG_CIFS_STATS2
@@ -286,10 +278,10 @@
FILE_SYSTEM_DEVICE_INFO fsDevInfo;
FILE_SYSTEM_ATTRIBUTE_INFO fsAttrInfo; /* ok if fs name truncated */
FILE_SYSTEM_UNIX_INFO fsUnixInfo;
- unsigned ipc:1; /* set if connection to IPC$ eg for RPC/PIPES */
- unsigned retry:1;
- unsigned nocase:1;
- unsigned unix_ext:1; /* if off disable Linux extensions to CIFS protocol
+ bool ipc:1; /* set if connection to IPC$ eg for RPC/PIPES */
+ bool retry:1;
+ bool nocase:1;
+ bool unix_ext:1; /* if false disable Linux extensions to CIFS protocol
for this mount even if server would support */
/* BB add field for back pointer to sb struct(s)? */
};
@@ -317,10 +309,10 @@
char *srch_entries_start;
char *presume_name;
unsigned int resume_name_len;
- unsigned endOfSearch:1;
- unsigned emptyDir:1;
- unsigned unicode:1;
- unsigned smallBuf:1; /* so we know which buf_release function to call */
+ bool endOfSearch:1;
+ bool emptyDir:1;
+ bool unicode:1;
+ bool smallBuf:1; /* so we know which buf_release function to call */
};
struct cifsFileInfo {
@@ -335,9 +327,9 @@
struct inode *pInode; /* needed for oplock break */
struct mutex lock_mutex;
struct list_head llist; /* list of byte range locks we have. */
- unsigned closePend:1; /* file is marked to close */
- unsigned invalidHandle:1; /* file closed via session abend */
- unsigned messageMode:1; /* for pipes: message vs byte mode */
+ bool closePend:1; /* file is marked to close */
+ bool invalidHandle:1; /* file closed via session abend */
+ bool messageMode:1; /* for pipes: message vs byte mode */
atomic_t wrtPending; /* handle in use - defer close */
struct semaphore fh_sem; /* prevents reopen race after dead ses*/
char *search_resume_name; /* BB removeme BB */
@@ -356,9 +348,9 @@
__u32 cifsAttrs; /* e.g. DOS archive bit, sparse, compressed, system */
atomic_t inUse; /* num concurrent users (local openers cifs) of file*/
unsigned long time; /* jiffies of last update/check of inode */
- unsigned clientCanCacheRead:1; /* read oplock */
- unsigned clientCanCacheAll:1; /* read and writebehind oplock */
- unsigned oplockPending:1;
+ bool clientCanCacheRead:1; /* read oplock */
+ bool clientCanCacheAll:1; /* read and writebehind oplock */
+ bool oplockPending:1;
struct inode vfs_inode;
};
@@ -426,9 +418,9 @@
struct smb_hdr *resp_buf; /* response buffer */
int midState; /* wish this were enum but can not pass to wait_event */
__u8 command; /* smb command code */
- unsigned largeBuf:1; /* if valid response, is pointer to large buf */
- unsigned multiRsp:1; /* multiple trans2 responses for one request */
- unsigned multiEnd:1; /* both received */
+ bool largeBuf:1; /* if valid response, is pointer to large buf */
+ bool multiRsp:1; /* multiple trans2 responses for one request */
+ bool multiEnd:1; /* both received */
};
struct oplock_q_entry {
diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h
index 9f49c2f..c43bf4b 100644
--- a/fs/cifs/cifspdu.h
+++ b/fs/cifs/cifspdu.h
@@ -340,6 +340,7 @@
#define OPEN_NO_RECALL 0x00400000
#define OPEN_FREE_SPACE_QUERY 0x00800000 /* should be zero */
#define CREATE_OPTIONS_MASK 0x007FFFFF
+#define CREATE_OPTION_READONLY 0x10000000
#define CREATE_OPTION_SPECIAL 0x20000000 /* system. NB not sent over wire */
/* ImpersonationLevel flags */
@@ -2050,7 +2051,7 @@
to 0xFFFF00 */
#define CIFS_UNIX_LARGE_WRITE_CAP 0x00000080
#define CIFS_UNIX_TRANSPORT_ENCRYPTION_CAP 0x00000100 /* can do SPNEGO crypt */
-#define CIFS_UNIX_TRANPSORT_ENCRYPTION_MANDATORY_CAP 0x00000200 /* must do */
+#define CIFS_UNIX_TRANSPORT_ENCRYPTION_MANDATORY_CAP 0x00000200 /* must do */
#define CIFS_UNIX_PROXY_CAP 0x00000400 /* Proxy cap: 0xACE ioctl and
QFS PROXY call */
#ifdef CONFIG_CIFS_POSIX
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 50f9fda..d481f6c 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -59,8 +59,9 @@
struct smb_hdr *out_buf,
int *bytes_returned);
extern int checkSMB(struct smb_hdr *smb, __u16 mid, unsigned int length);
-extern int is_valid_oplock_break(struct smb_hdr *smb, struct TCP_Server_Info *);
-extern int is_size_safe_to_change(struct cifsInodeInfo *, __u64 eof);
+extern bool is_valid_oplock_break(struct smb_hdr *smb,
+ struct TCP_Server_Info *);
+extern bool is_size_safe_to_change(struct cifsInodeInfo *, __u64 eof);
extern struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *);
#ifdef CONFIG_CIFS_EXPERIMENTAL
extern struct cifsFileInfo *find_readable_file(struct cifsInodeInfo *);
@@ -69,7 +70,7 @@
extern unsigned int smbCalcSize_LE(struct smb_hdr *ptr);
extern int decode_negTokenInit(unsigned char *security_blob, int length,
enum securityEnum *secType);
-extern int cifs_inet_pton(int, char *source, void *dst);
+extern int cifs_inet_pton(const int, const char *source, void *dst);
extern int map_smb_to_linux_error(struct smb_hdr *smb, int logErr);
extern void header_assemble(struct smb_hdr *, char /* command */ ,
const struct cifsTconInfo *, int /* length of
@@ -187,12 +188,12 @@
#endif /* possibly unneeded function */
extern int CIFSSMBSetEOF(const int xid, struct cifsTconInfo *tcon,
const char *fileName, __u64 size,
- int setAllocationSizeFlag,
+ bool setAllocationSizeFlag,
const struct nls_table *nls_codepage,
int remap_special_chars);
extern int CIFSSMBSetFileSize(const int xid, struct cifsTconInfo *tcon,
__u64 size, __u16 fileHandle, __u32 opener_pid,
- int AllocSizeFlag);
+ bool AllocSizeFlag);
extern int CIFSSMBUnixSetPerms(const int xid, struct cifsTconInfo *pTcon,
char *full_path, __u64 mode, __u64 uid,
__u64 gid, dev_t dev,
@@ -291,11 +292,11 @@
const __u16 netfid, const __u64 len,
const __u64 offset, const __u32 numUnlock,
const __u32 numLock, const __u8 lockType,
- const int waitFlag);
+ const bool waitFlag);
extern int CIFSSMBPosixLock(const int xid, struct cifsTconInfo *tcon,
const __u16 smb_file_id, const int get_flag,
const __u64 len, struct file_lock *,
- const __u16 lock_type, const int waitFlag);
+ const __u16 lock_type, const bool waitFlag);
extern int CIFSSMBTDis(const int xid, struct cifsTconInfo *tcon);
extern int CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses);
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 4728fa9..95fbba4e 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -95,7 +95,7 @@
list_for_each_safe(tmp, tmp1, &pTcon->openFileList) {
open_file = list_entry(tmp, struct cifsFileInfo, tlist);
if (open_file)
- open_file->invalidHandle = TRUE;
+ open_file->invalidHandle = true;
}
write_unlock(&GlobalSMBSeslock);
/* BB Add call to invalidate_inodes(sb) for all superblocks mounted
@@ -141,7 +141,7 @@
if (tcon->ses->server->tcpStatus ==
CifsNeedReconnect) {
/* on "soft" mounts we wait once */
- if ((tcon->retry == FALSE) ||
+ if (!tcon->retry ||
(tcon->ses->status == CifsExiting)) {
cFYI(1, ("gave up waiting on "
"reconnect in smb_init"));
@@ -289,7 +289,7 @@
if (tcon->ses->server->tcpStatus ==
CifsNeedReconnect) {
/* on "soft" mounts we wait once */
- if ((tcon->retry == FALSE) ||
+ if (!tcon->retry ||
(tcon->ses->status == CifsExiting)) {
cFYI(1, ("gave up waiting on "
"reconnect in smb_init"));
@@ -1224,11 +1224,8 @@
else /* BB FIXME BB */
pSMB->FileAttributes = cpu_to_le16(0/*ATTR_NORMAL*/);
- /* if ((omode & S_IWUGO) == 0)
- pSMB->FileAttributes |= cpu_to_le32(ATTR_READONLY);*/
- /* Above line causes problems due to vfs splitting create into two
- pieces - need to set mode after file created not while it is
- being created */
+ if (create_options & CREATE_OPTION_READONLY)
+ pSMB->FileAttributes |= cpu_to_le16(ATTR_READONLY);
/* BB FIXME BB */
/* pSMB->CreateOptions = cpu_to_le32(create_options &
@@ -1331,17 +1328,16 @@
pSMB->FileAttributes = cpu_to_le32(ATTR_SYSTEM);
else
pSMB->FileAttributes = cpu_to_le32(ATTR_NORMAL);
+
/* XP does not handle ATTR_POSIX_SEMANTICS */
/* but it helps speed up case sensitive checks for other
servers such as Samba */
if (tcon->ses->capabilities & CAP_UNIX)
pSMB->FileAttributes |= cpu_to_le32(ATTR_POSIX_SEMANTICS);
- /* if ((omode & S_IWUGO) == 0)
- pSMB->FileAttributes |= cpu_to_le32(ATTR_READONLY);*/
- /* Above line causes problems due to vfs splitting create into two
- pieces - need to set mode after file created not while it is
- being created */
+ if (create_options & CREATE_OPTION_READONLY)
+ pSMB->FileAttributes |= cpu_to_le32(ATTR_READONLY);
+
pSMB->ShareAccess = cpu_to_le32(FILE_SHARE_ALL);
pSMB->CreateDisposition = cpu_to_le32(openDisposition);
pSMB->CreateOptions = cpu_to_le32(create_options & CREATE_OPTIONS_MASK);
@@ -1686,7 +1682,7 @@
CIFSSMBLock(const int xid, struct cifsTconInfo *tcon,
const __u16 smb_file_id, const __u64 len,
const __u64 offset, const __u32 numUnlock,
- const __u32 numLock, const __u8 lockType, const int waitFlag)
+ const __u32 numLock, const __u8 lockType, const bool waitFlag)
{
int rc = 0;
LOCK_REQ *pSMB = NULL;
@@ -1695,7 +1691,7 @@
int timeout = 0;
__u16 count;
- cFYI(1, ("CIFSSMBLock timeout %d numLock %d", waitFlag, numLock));
+ cFYI(1, ("CIFSSMBLock timeout %d numLock %d", (int)waitFlag, numLock));
rc = small_smb_init(SMB_COM_LOCKING_ANDX, 8, tcon, (void **) &pSMB);
if (rc)
@@ -1706,7 +1702,7 @@
if (lockType == LOCKING_ANDX_OPLOCK_RELEASE) {
timeout = CIFS_ASYNC_OP; /* no response expected */
pSMB->Timeout = 0;
- } else if (waitFlag == TRUE) {
+ } else if (waitFlag) {
timeout = CIFS_BLOCKING_OP; /* blocking operation, no timeout */
pSMB->Timeout = cpu_to_le32(-1);/* blocking - do not time out */
} else {
@@ -1756,7 +1752,7 @@
CIFSSMBPosixLock(const int xid, struct cifsTconInfo *tcon,
const __u16 smb_file_id, const int get_flag, const __u64 len,
struct file_lock *pLockData, const __u16 lock_type,
- const int waitFlag)
+ const bool waitFlag)
{
struct smb_com_transaction2_sfi_req *pSMB = NULL;
struct smb_com_transaction2_sfi_rsp *pSMBr = NULL;
@@ -3581,9 +3577,9 @@
rc = validate_t2((struct smb_t2_rsp *)pSMBr);
if (rc == 0) {
if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE)
- psrch_inf->unicode = TRUE;
+ psrch_inf->unicode = true;
else
- psrch_inf->unicode = FALSE;
+ psrch_inf->unicode = false;
psrch_inf->ntwrk_buf_start = (char *)pSMBr;
psrch_inf->smallBuf = 0;
@@ -3594,9 +3590,9 @@
le16_to_cpu(pSMBr->t2.ParameterOffset));
if (parms->EndofSearch)
- psrch_inf->endOfSearch = TRUE;
+ psrch_inf->endOfSearch = true;
else
- psrch_inf->endOfSearch = FALSE;
+ psrch_inf->endOfSearch = false;
psrch_inf->entries_in_buffer =
le16_to_cpu(parms->SearchCount);
@@ -3624,7 +3620,7 @@
cFYI(1, ("In FindNext"));
- if (psrch_inf->endOfSearch == TRUE)
+ if (psrch_inf->endOfSearch)
return -ENOENT;
rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
@@ -3682,7 +3678,7 @@
cifs_stats_inc(&tcon->num_fnext);
if (rc) {
if (rc == -EBADF) {
- psrch_inf->endOfSearch = TRUE;
+ psrch_inf->endOfSearch = true;
rc = 0; /* search probably was closed at end of search*/
} else
cFYI(1, ("FindNext returned = %d", rc));
@@ -3692,9 +3688,9 @@
if (rc == 0) {
/* BB fixme add lock for file (srch_info) struct here */
if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE)
- psrch_inf->unicode = TRUE;
+ psrch_inf->unicode = true;
else
- psrch_inf->unicode = FALSE;
+ psrch_inf->unicode = false;
response_data = (char *) &pSMBr->hdr.Protocol +
le16_to_cpu(pSMBr->t2.ParameterOffset);
parms = (T2_FNEXT_RSP_PARMS *)response_data;
@@ -3709,9 +3705,9 @@
psrch_inf->ntwrk_buf_start = (char *)pSMB;
psrch_inf->smallBuf = 0;
if (parms->EndofSearch)
- psrch_inf->endOfSearch = TRUE;
+ psrch_inf->endOfSearch = true;
else
- psrch_inf->endOfSearch = FALSE;
+ psrch_inf->endOfSearch = false;
psrch_inf->entries_in_buffer =
le16_to_cpu(parms->SearchCount);
psrch_inf->index_of_last_entry +=
@@ -4586,7 +4582,7 @@
int
CIFSSMBSetEOF(const int xid, struct cifsTconInfo *tcon, const char *fileName,
- __u64 size, int SetAllocation,
+ __u64 size, bool SetAllocation,
const struct nls_table *nls_codepage, int remap)
{
struct smb_com_transaction2_spi_req *pSMB = NULL;
@@ -4675,7 +4671,7 @@
int
CIFSSMBSetFileSize(const int xid, struct cifsTconInfo *tcon, __u64 size,
- __u16 fid, __u32 pid_of_opener, int SetAllocation)
+ __u16 fid, __u32 pid_of_opener, bool SetAllocation)
{
struct smb_com_transaction2_sfi_req *pSMB = NULL;
char *data_offset;
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index e171067..f428bf3 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -49,8 +49,6 @@
#define CIFS_PORT 445
#define RFC1001_PORT 139
-static DECLARE_COMPLETION(cifsd_complete);
-
extern void SMBNTencrypt(unsigned char *passwd, unsigned char *c8,
unsigned char *p24);
@@ -71,23 +69,23 @@
mode_t file_mode;
mode_t dir_mode;
unsigned secFlg;
- unsigned rw:1;
- unsigned retry:1;
- unsigned intr:1;
- unsigned setuids:1;
- unsigned override_uid:1;
- unsigned override_gid:1;
- unsigned noperm:1;
- unsigned no_psx_acl:1; /* set if posix acl support should be disabled */
- unsigned cifs_acl:1;
- unsigned no_xattr:1; /* set if xattr (EA) support should be disabled*/
- unsigned server_ino:1; /* use inode numbers from server ie UniqueId */
- unsigned direct_io:1;
- unsigned remap:1; /* set to remap seven reserved chars in filenames */
- unsigned posix_paths:1; /* unset to not ask for posix pathnames. */
- unsigned no_linux_ext:1;
- unsigned sfu_emul:1;
- unsigned nullauth:1; /* attempt to authenticate with null user */
+ bool rw:1;
+ bool retry:1;
+ bool intr:1;
+ bool setuids:1;
+ bool override_uid:1;
+ bool override_gid:1;
+ bool noperm:1;
+ bool no_psx_acl:1; /* set if posix acl support should be disabled */
+ bool cifs_acl:1;
+ bool no_xattr:1; /* set if xattr (EA) support should be disabled*/
+ bool server_ino:1; /* use inode numbers from server ie UniqueId */
+ bool direct_io:1;
+ bool remap:1; /* set to remap seven reserved chars in filenames */
+ bool posix_paths:1; /* unset to not ask for posix pathnames. */
+ bool no_linux_ext:1;
+ bool sfu_emul:1;
+ bool nullauth:1; /* attempt to authenticate with null user */
unsigned nocase; /* request case insensitive filenames */
unsigned nobrl; /* disable sending byte range locks to srv */
unsigned int rsize;
@@ -345,18 +343,16 @@
struct task_struct *task_to_wake = NULL;
struct mid_q_entry *mid_entry;
char temp;
- int isLargeBuf = FALSE;
- int isMultiRsp;
+ bool isLargeBuf = false;
+ bool isMultiRsp;
int reconnect;
current->flags |= PF_MEMALLOC;
- server->tsk = current; /* save process info to wake at shutdown */
cFYI(1, ("Demultiplex PID: %d", task_pid_nr(current)));
write_lock(&GlobalSMBSeslock);
atomic_inc(&tcpSesAllocCount);
length = tcpSesAllocCount.counter;
write_unlock(&GlobalSMBSeslock);
- complete(&cifsd_complete);
if (length > 1)
mempool_resize(cifs_req_poolp, length + cifs_min_rcv,
GFP_KERNEL);
@@ -390,8 +386,8 @@
} else /* if existing small buf clear beginning */
memset(smallbuf, 0, sizeof(struct smb_hdr));
- isLargeBuf = FALSE;
- isMultiRsp = FALSE;
+ isLargeBuf = false;
+ isMultiRsp = false;
smb_buffer = smallbuf;
iov.iov_base = smb_buffer;
iov.iov_len = 4;
@@ -517,7 +513,7 @@
reconnect = 0;
if (pdu_length > MAX_CIFS_SMALL_BUFFER_SIZE - 4) {
- isLargeBuf = TRUE;
+ isLargeBuf = true;
memcpy(bigbuf, smallbuf, 4);
smb_buffer = bigbuf;
}
@@ -582,16 +578,18 @@
(mid_entry->command == smb_buffer->Command)) {
if (check2ndT2(smb_buffer,server->maxBuf) > 0) {
/* We have a multipart transact2 resp */
- isMultiRsp = TRUE;
+ isMultiRsp = true;
if (mid_entry->resp_buf) {
/* merge response - fix up 1st*/
if (coalesce_t2(smb_buffer,
mid_entry->resp_buf)) {
- mid_entry->multiRsp = 1;
+ mid_entry->multiRsp =
+ true;
break;
} else {
/* all parts received */
- mid_entry->multiEnd = 1;
+ mid_entry->multiEnd =
+ true;
goto multi_t2_fnd;
}
} else {
@@ -603,17 +601,15 @@
/* Have first buffer */
mid_entry->resp_buf =
smb_buffer;
- mid_entry->largeBuf = 1;
+ mid_entry->largeBuf =
+ true;
bigbuf = NULL;
}
}
break;
}
mid_entry->resp_buf = smb_buffer;
- if (isLargeBuf)
- mid_entry->largeBuf = 1;
- else
- mid_entry->largeBuf = 0;
+ mid_entry->largeBuf = isLargeBuf;
multi_t2_fnd:
task_to_wake = mid_entry->tsk;
mid_entry->midState = MID_RESPONSE_RECEIVED;
@@ -638,8 +634,8 @@
smallbuf = NULL;
}
wake_up_process(task_to_wake);
- } else if ((is_valid_oplock_break(smb_buffer, server) == FALSE)
- && (isMultiRsp == FALSE)) {
+ } else if (!is_valid_oplock_break(smb_buffer, server) &&
+ !isMultiRsp) {
cERROR(1, ("No task to wake, unknown frame received! "
"NumMids %d", midCount.counter));
cifs_dump_mem("Received Data is: ", (char *)smb_buffer,
@@ -654,10 +650,20 @@
spin_lock(&GlobalMid_Lock);
server->tcpStatus = CifsExiting;
- server->tsk = NULL;
+ spin_unlock(&GlobalMid_Lock);
+
+ /* don't exit until kthread_stop is called */
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ while (!kthread_should_stop()) {
+ schedule();
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ }
+ set_current_state(TASK_RUNNING);
+
/* check if we have blocked requests that need to free */
/* Note that cifs_max_pending is normally 50, but
can be set at module install time to as little as two */
+ spin_lock(&GlobalMid_Lock);
if (atomic_read(&server->inFlight) >= cifs_max_pending)
atomic_set(&server->inFlight, cifs_max_pending - 1);
/* We do not want to set the max_pending too low or we
@@ -825,7 +831,7 @@
vol->file_mode = (S_IRWXUGO | S_ISGID) & (~S_IXGRP);
/* vol->retry default is 0 (i.e. "soft" limited retry not hard retry) */
- vol->rw = TRUE;
+ vol->rw = true;
/* default is always to request posix paths. */
vol->posix_paths = 1;
@@ -1181,7 +1187,7 @@
} else if (strnicmp(data, "guest", 5) == 0) {
/* ignore */
} else if (strnicmp(data, "rw", 2) == 0) {
- vol->rw = TRUE;
+ vol->rw = true;
} else if ((strnicmp(data, "suid", 4) == 0) ||
(strnicmp(data, "nosuid", 6) == 0) ||
(strnicmp(data, "exec", 4) == 0) ||
@@ -1197,7 +1203,7 @@
is ok to just ignore them */
continue;
} else if (strnicmp(data, "ro", 2) == 0) {
- vol->rw = FALSE;
+ vol->rw = false;
} else if (strnicmp(data, "hard", 4) == 0) {
vol->retry = 1;
} else if (strnicmp(data, "soft", 4) == 0) {
@@ -1305,6 +1311,9 @@
"begin with // or \\\\ \n");
return 1;
}
+ value = strpbrk(vol->UNC+2, "/\\");
+ if (value)
+ *value = '\\';
} else {
printk(KERN_WARNING "CIFS: UNC name too long\n");
return 1;
@@ -1318,42 +1327,43 @@
static struct cifsSesInfo *
cifs_find_tcp_session(struct in_addr *target_ip_addr,
- struct in6_addr *target_ip6_addr,
- char *userName, struct TCP_Server_Info **psrvTcp)
+ struct in6_addr *target_ip6_addr,
+ char *userName, struct TCP_Server_Info **psrvTcp)
{
struct list_head *tmp;
struct cifsSesInfo *ses;
- *psrvTcp = NULL;
- read_lock(&GlobalSMBSeslock);
+ *psrvTcp = NULL;
+
+ read_lock(&GlobalSMBSeslock);
list_for_each(tmp, &GlobalSMBSessionList) {
ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList);
- if (ses->server) {
- if ((target_ip_addr &&
- (ses->server->addr.sockAddr.sin_addr.s_addr
- == target_ip_addr->s_addr)) || (target_ip6_addr
- && memcmp(&ses->server->addr.sockAddr6.sin6_addr,
- target_ip6_addr, sizeof(*target_ip6_addr)))) {
- /* BB lock server and tcp session and increment
- use count here?? */
+ if (!ses->server)
+ continue;
- /* found a match on the TCP session */
- *psrvTcp = ses->server;
+ if (target_ip_addr &&
+ ses->server->addr.sockAddr.sin_addr.s_addr != target_ip_addr->s_addr)
+ continue;
+ else if (target_ip6_addr &&
+ memcmp(&ses->server->addr.sockAddr6.sin6_addr,
+ target_ip6_addr, sizeof(*target_ip6_addr)))
+ continue;
+ /* BB lock server and tcp session; increment use count here?? */
- /* BB check if reconnection needed */
- if (strncmp
- (ses->userName, userName,
- MAX_USERNAME_SIZE) == 0){
- read_unlock(&GlobalSMBSeslock);
- /* Found exact match on both TCP and
- SMB sessions */
- return ses;
- }
- }
+ /* found a match on the TCP session */
+ *psrvTcp = ses->server;
+
+ /* BB check if reconnection needed */
+ if (strncmp(ses->userName, userName, MAX_USERNAME_SIZE) == 0) {
+ read_unlock(&GlobalSMBSeslock);
+ /* Found exact match on both TCP and
+ SMB sessions */
+ return ses;
}
/* else tcp and smb sessions need reconnection */
}
read_unlock(&GlobalSMBSeslock);
+
return NULL;
}
@@ -1362,45 +1372,43 @@
{
struct list_head *tmp;
struct cifsTconInfo *tcon;
+ __be32 old_ip;
read_lock(&GlobalSMBSeslock);
+
list_for_each(tmp, &GlobalTreeConnectionList) {
cFYI(1, ("Next tcon"));
tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList);
- if (tcon->ses) {
- if (tcon->ses->server) {
- cFYI(1,
- ("old ip addr: %x == new ip %x ?",
- tcon->ses->server->addr.sockAddr.sin_addr.
- s_addr, new_target_ip_addr));
- if (tcon->ses->server->addr.sockAddr.sin_addr.
- s_addr == new_target_ip_addr) {
- /* BB lock tcon, server and tcp session and increment use count here? */
- /* found a match on the TCP session */
- /* BB check if reconnection needed */
- cFYI(1,
- ("IP match, old UNC: %s new: %s",
- tcon->treeName, uncName));
- if (strncmp
- (tcon->treeName, uncName,
- MAX_TREE_SIZE) == 0) {
- cFYI(1,
- ("and old usr: %s new: %s",
- tcon->treeName, uncName));
- if (strncmp
- (tcon->ses->userName,
- userName,
- MAX_USERNAME_SIZE) == 0) {
- read_unlock(&GlobalSMBSeslock);
- /* matched smb session
- (user name */
- return tcon;
- }
- }
- }
- }
- }
+ if (!tcon->ses || !tcon->ses->server)
+ continue;
+
+ old_ip = tcon->ses->server->addr.sockAddr.sin_addr.s_addr;
+ cFYI(1, ("old ip addr: %x == new ip %x ?",
+ old_ip, new_target_ip_addr));
+
+ if (old_ip != new_target_ip_addr)
+ continue;
+
+ /* BB lock tcon, server, tcp session and increment use count? */
+ /* found a match on the TCP session */
+ /* BB check if reconnection needed */
+ cFYI(1, ("IP match, old UNC: %s new: %s",
+ tcon->treeName, uncName));
+
+ if (strncmp(tcon->treeName, uncName, MAX_TREE_SIZE))
+ continue;
+
+ cFYI(1, ("and old usr: %s new: %s",
+ tcon->treeName, uncName));
+
+ if (strncmp(tcon->ses->userName, userName, MAX_USERNAME_SIZE))
+ continue;
+
+ /* matched smb session (user name) */
+ read_unlock(&GlobalSMBSeslock);
+ return tcon;
}
+
read_unlock(&GlobalSMBSeslock);
return NULL;
}
@@ -1982,7 +1990,6 @@
kfree(srvTcp->hostname);
goto out;
}
- wait_for_completion(&cifsd_complete);
rc = 0;
memcpy(srvTcp->workstation_RFC1001_name,
volume_info.source_rfc1001_name, 16);
@@ -2189,15 +2196,12 @@
srvTcp->tcpStatus = CifsExiting;
spin_unlock(&GlobalMid_Lock);
if (srvTcp->tsk) {
- struct task_struct *tsk;
/* If we could verify that kthread_stop would
always wake up processes blocked in
tcp in recv_mesg then we could remove the
send_sig call */
force_sig(SIGKILL, srvTcp->tsk);
- tsk = srvTcp->tsk;
- if (tsk)
- kthread_stop(tsk);
+ kthread_stop(srvTcp->tsk);
}
}
/* If find_unc succeeded then rc == 0 so we can not end */
@@ -2213,23 +2217,17 @@
if ((temp_rc == -ESHUTDOWN) &&
(pSesInfo->server) &&
(pSesInfo->server->tsk)) {
- struct task_struct *tsk;
force_sig(SIGKILL,
pSesInfo->server->tsk);
- tsk = pSesInfo->server->tsk;
- if (tsk)
- kthread_stop(tsk);
+ kthread_stop(pSesInfo->server->tsk);
}
} else {
cFYI(1, ("No session or bad tcon"));
if ((pSesInfo->server) &&
(pSesInfo->server->tsk)) {
- struct task_struct *tsk;
force_sig(SIGKILL,
pSesInfo->server->tsk);
- tsk = pSesInfo->server->tsk;
- if (tsk)
- kthread_stop(tsk);
+ kthread_stop(pSesInfo->server->tsk);
}
}
sesInfoFree(pSesInfo);
@@ -2602,7 +2600,7 @@
static int
CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
- struct cifsSesInfo *ses, int *pNTLMv2_flag,
+ struct cifsSesInfo *ses, bool *pNTLMv2_flag,
const struct nls_table *nls_codepage)
{
struct smb_hdr *smb_buffer;
@@ -2625,7 +2623,7 @@
if (ses == NULL)
return -EINVAL;
domain = ses->domainName;
- *pNTLMv2_flag = FALSE;
+ *pNTLMv2_flag = false;
smb_buffer = cifs_buf_get();
if (smb_buffer == NULL) {
return -ENOMEM;
@@ -2778,7 +2776,7 @@
CIFS_CRYPTO_KEY_SIZE);
if (SecurityBlob2->NegotiateFlags &
cpu_to_le32(NTLMSSP_NEGOTIATE_NTLMV2))
- *pNTLMv2_flag = TRUE;
+ *pNTLMv2_flag = true;
if ((SecurityBlob2->NegotiateFlags &
cpu_to_le32(NTLMSSP_NEGOTIATE_ALWAYS_SIGN))
@@ -2939,7 +2937,7 @@
}
static int
CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
- char *ntlm_session_key, int ntlmv2_flag,
+ char *ntlm_session_key, bool ntlmv2_flag,
const struct nls_table *nls_codepage)
{
struct smb_hdr *smb_buffer;
@@ -3556,8 +3554,6 @@
cifs_sb->prepath = NULL;
kfree(tmp);
if (ses)
- schedule_timeout_interruptible(msecs_to_jiffies(500));
- if (ses)
sesInfoFree(ses);
FreeXid(xid);
@@ -3569,7 +3565,7 @@
{
int rc = 0;
char ntlm_session_key[CIFS_SESS_KEY_SIZE];
- int ntlmv2_flag = FALSE;
+ bool ntlmv2_flag = false;
int first_time = 0;
/* what if server changes its buffer size after dropping the session? */
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 0f5c62b..e4e0078 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -119,6 +119,7 @@
{
int rc = -ENOENT;
int xid;
+ int create_options = CREATE_NOT_DIR;
int oplock = 0;
int desiredAccess = GENERIC_READ | GENERIC_WRITE;
__u16 fileHandle;
@@ -130,7 +131,7 @@
struct cifsFileInfo *pCifsFile = NULL;
struct cifsInodeInfo *pCifsInode;
int disposition = FILE_OVERWRITE_IF;
- int write_only = FALSE;
+ bool write_only = false;
xid = GetXid();
@@ -152,7 +153,7 @@
if (oflags & FMODE_WRITE) {
desiredAccess |= GENERIC_WRITE;
if (!(oflags & FMODE_READ))
- write_only = TRUE;
+ write_only = true;
}
if ((oflags & (O_CREAT | O_EXCL)) == (O_CREAT | O_EXCL))
@@ -176,9 +177,19 @@
FreeXid(xid);
return -ENOMEM;
}
+
+ mode &= ~current->fs->umask;
+
+ /*
+ * if we're not using unix extensions, see if we need to set
+ * ATTR_READONLY on the create call
+ */
+ if (!pTcon->unix_ext && (mode & S_IWUGO) == 0)
+ create_options |= CREATE_OPTION_READONLY;
+
if (cifs_sb->tcon->ses->capabilities & CAP_NT_SMBS)
rc = CIFSSMBOpen(xid, pTcon, full_path, disposition,
- desiredAccess, CREATE_NOT_DIR,
+ desiredAccess, create_options,
&fileHandle, &oplock, buf, cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
else
@@ -187,7 +198,7 @@
if (rc == -EIO) {
/* old server, retry the open legacy style */
rc = SMBLegacyOpen(xid, pTcon, full_path, disposition,
- desiredAccess, CREATE_NOT_DIR,
+ desiredAccess, create_options,
&fileHandle, &oplock, buf, cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
}
@@ -197,7 +208,6 @@
/* If Open reported that we actually created a file
then we now have to set the mode if possible */
if ((pTcon->unix_ext) && (oplock & CIFS_CREATE_ACTION)) {
- mode &= ~current->fs->umask;
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) {
CIFSSMBUnixSetPerms(xid, pTcon, full_path, mode,
(__u64)current->fsuid,
@@ -254,7 +264,7 @@
d_instantiate(direntry, newinode);
}
if ((nd == NULL /* nfsd case - nfs srv does not set nd */) ||
- ((nd->flags & LOOKUP_OPEN) == FALSE)) {
+ (!(nd->flags & LOOKUP_OPEN))) {
/* mknod case - do not leave file open */
CIFSSMBClose(xid, pTcon, fileHandle);
} else if (newinode) {
@@ -266,8 +276,8 @@
pCifsFile->netfid = fileHandle;
pCifsFile->pid = current->tgid;
pCifsFile->pInode = newinode;
- pCifsFile->invalidHandle = FALSE;
- pCifsFile->closePend = FALSE;
+ pCifsFile->invalidHandle = false;
+ pCifsFile->closePend = false;
init_MUTEX(&pCifsFile->fh_sem);
mutex_init(&pCifsFile->lock_mutex);
INIT_LIST_HEAD(&pCifsFile->llist);
@@ -280,7 +290,7 @@
pCifsInode = CIFS_I(newinode);
if (pCifsInode) {
/* if readable file instance put first in list*/
- if (write_only == TRUE) {
+ if (write_only) {
list_add_tail(&pCifsFile->flist,
&pCifsInode->openFileList);
} else {
@@ -288,12 +298,12 @@
&pCifsInode->openFileList);
}
if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
- pCifsInode->clientCanCacheAll = TRUE;
- pCifsInode->clientCanCacheRead = TRUE;
+ pCifsInode->clientCanCacheAll = true;
+ pCifsInode->clientCanCacheRead = true;
cFYI(1, ("Exclusive Oplock inode %p",
newinode));
} else if ((oplock & 0xF) == OPLOCK_READ)
- pCifsInode->clientCanCacheRead = TRUE;
+ pCifsInode->clientCanCacheRead = true;
}
write_unlock(&GlobalSMBSeslock);
}
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index 7cc86c4..939e256 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -55,6 +55,32 @@
.match = user_match,
};
+/* Checks if supplied name is IP address
+ * returns:
+ * 1 - name is IP
+ * 0 - name is not IP
+ */
+static int is_ip(const char *name)
+{
+ int rc;
+ struct sockaddr_in sin_server;
+ struct sockaddr_in6 sin_server6;
+
+ rc = cifs_inet_pton(AF_INET, name,
+ &sin_server.sin_addr.s_addr);
+
+ if (rc <= 0) {
+ /* not ipv4 address, try ipv6 */
+ rc = cifs_inet_pton(AF_INET6, name,
+ &sin_server6.sin6_addr.in6_u);
+ if (rc > 0)
+ return 1;
+ } else {
+ return 1;
+ }
+ /* we failed translating address */
+ return 0;
+}
/* Resolves server name to ip address.
* input:
@@ -67,8 +93,9 @@
dns_resolve_server_name_to_ip(const char *unc, char **ip_addr)
{
int rc = -EAGAIN;
- struct key *rkey;
+ struct key *rkey = ERR_PTR(-EAGAIN);
char *name;
+ char *data = NULL;
int len;
if (!ip_addr || !unc)
@@ -97,26 +124,41 @@
memcpy(name, unc+2, len);
name[len] = 0;
+ if (is_ip(name)) {
+ cFYI(1, ("%s: it is IP, skipping dns upcall: %s",
+ __func__, name));
+ data = name;
+ goto skip_upcall;
+ }
+
rkey = request_key(&key_type_dns_resolver, name, "");
if (!IS_ERR(rkey)) {
- len = strlen(rkey->payload.data);
- *ip_addr = kmalloc(len+1, GFP_KERNEL);
- if (*ip_addr) {
- memcpy(*ip_addr, rkey->payload.data, len);
- (*ip_addr)[len] = '\0';
- cFYI(1, ("%s: resolved: %s to %s", __func__,
+ data = rkey->payload.data;
+ cFYI(1, ("%s: resolved: %s to %s", __func__,
rkey->description,
*ip_addr
));
+ } else {
+ cERROR(1, ("%s: unable to resolve: %s", __func__, name));
+ goto out;
+ }
+
+skip_upcall:
+ if (data) {
+ len = strlen(data);
+ *ip_addr = kmalloc(len+1, GFP_KERNEL);
+ if (*ip_addr) {
+ memcpy(*ip_addr, data, len);
+ (*ip_addr)[len] = '\0';
rc = 0;
} else {
rc = -ENOMEM;
}
- key_put(rkey);
- } else {
- cERROR(1, ("%s: unable to resolve: %s", __func__, name));
+ if (!IS_ERR(rkey))
+ key_put(rkey);
}
+out:
kfree(name);
return rc;
}
diff --git a/fs/cifs/fcntl.c b/fs/cifs/fcntl.c
index 7d1d5aa..5a57581 100644
--- a/fs/cifs/fcntl.c
+++ b/fs/cifs/fcntl.c
@@ -68,7 +68,7 @@
{
int xid;
int rc = -EINVAL;
- int oplock = FALSE;
+ int oplock = 0;
struct cifs_sb_info *cifs_sb;
struct cifsTconInfo *pTcon;
char *full_path = NULL;
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 40b6900..31a0a33 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -51,8 +51,8 @@
INIT_LIST_HEAD(&private_data->llist);
private_data->pfile = file; /* needed for writepage */
private_data->pInode = inode;
- private_data->invalidHandle = FALSE;
- private_data->closePend = FALSE;
+ private_data->invalidHandle = false;
+ private_data->closePend = false;
/* we have to track num writers to the inode, since writepages
does not tell us which handle the write is for so there can
be a close (overlapping with write) of the filehandle that
@@ -148,12 +148,12 @@
full_path, buf, inode->i_sb, xid, NULL);
if ((*oplock & 0xF) == OPLOCK_EXCLUSIVE) {
- pCifsInode->clientCanCacheAll = TRUE;
- pCifsInode->clientCanCacheRead = TRUE;
+ pCifsInode->clientCanCacheAll = true;
+ pCifsInode->clientCanCacheRead = true;
cFYI(1, ("Exclusive Oplock granted on inode %p",
file->f_path.dentry->d_inode));
} else if ((*oplock & 0xF) == OPLOCK_READ)
- pCifsInode->clientCanCacheRead = TRUE;
+ pCifsInode->clientCanCacheRead = true;
return rc;
}
@@ -247,7 +247,7 @@
if (oplockEnabled)
oplock = REQ_OPLOCK;
else
- oplock = FALSE;
+ oplock = 0;
/* BB pass O_SYNC flag through on file attributes .. BB */
@@ -339,7 +339,7 @@
return rc;
}
-static int cifs_reopen_file(struct file *file, int can_flush)
+static int cifs_reopen_file(struct file *file, bool can_flush)
{
int rc = -EACCES;
int xid, oplock;
@@ -360,7 +360,7 @@
xid = GetXid();
down(&pCifsFile->fh_sem);
- if (pCifsFile->invalidHandle == FALSE) {
+ if (!pCifsFile->invalidHandle) {
up(&pCifsFile->fh_sem);
FreeXid(xid);
return 0;
@@ -404,7 +404,7 @@
if (oplockEnabled)
oplock = REQ_OPLOCK;
else
- oplock = FALSE;
+ oplock = 0;
/* Can not refresh inode by passing in file_info buf to be returned
by SMBOpen and then calling get_inode_info with returned buf
@@ -422,7 +422,7 @@
cFYI(1, ("oplock: %d", oplock));
} else {
pCifsFile->netfid = netfid;
- pCifsFile->invalidHandle = FALSE;
+ pCifsFile->invalidHandle = false;
up(&pCifsFile->fh_sem);
pCifsInode = CIFS_I(inode);
if (pCifsInode) {
@@ -432,8 +432,8 @@
CIFS_I(inode)->write_behind_rc = rc;
/* temporarily disable caching while we
go to server to get inode info */
- pCifsInode->clientCanCacheAll = FALSE;
- pCifsInode->clientCanCacheRead = FALSE;
+ pCifsInode->clientCanCacheAll = false;
+ pCifsInode->clientCanCacheRead = false;
if (pTcon->unix_ext)
rc = cifs_get_inode_info_unix(&inode,
full_path, inode->i_sb, xid);
@@ -448,16 +448,16 @@
we can not go to the server to get the new inod
info */
if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
- pCifsInode->clientCanCacheAll = TRUE;
- pCifsInode->clientCanCacheRead = TRUE;
+ pCifsInode->clientCanCacheAll = true;
+ pCifsInode->clientCanCacheRead = true;
cFYI(1, ("Exclusive Oplock granted on inode %p",
file->f_path.dentry->d_inode));
} else if ((oplock & 0xF) == OPLOCK_READ) {
- pCifsInode->clientCanCacheRead = TRUE;
- pCifsInode->clientCanCacheAll = FALSE;
+ pCifsInode->clientCanCacheRead = true;
+ pCifsInode->clientCanCacheAll = false;
} else {
- pCifsInode->clientCanCacheRead = FALSE;
- pCifsInode->clientCanCacheAll = FALSE;
+ pCifsInode->clientCanCacheRead = false;
+ pCifsInode->clientCanCacheAll = false;
}
cifs_relock_file(pCifsFile);
}
@@ -484,7 +484,7 @@
if (pSMBFile) {
struct cifsLockInfo *li, *tmp;
- pSMBFile->closePend = TRUE;
+ pSMBFile->closePend = true;
if (pTcon) {
/* no sense reconnecting to close a file that is
already closed */
@@ -553,8 +553,8 @@
cFYI(1, ("closing last open instance for inode %p", inode));
/* if the file is not open we do not know if we can cache info
on this inode, much less write behind and read ahead */
- CIFS_I(inode)->clientCanCacheRead = FALSE;
- CIFS_I(inode)->clientCanCacheAll = FALSE;
+ CIFS_I(inode)->clientCanCacheRead = false;
+ CIFS_I(inode)->clientCanCacheAll = false;
}
read_unlock(&GlobalSMBSeslock);
if ((rc == 0) && CIFS_I(inode)->write_behind_rc)
@@ -583,9 +583,9 @@
pTcon = cifs_sb->tcon;
cFYI(1, ("Freeing private data in close dir"));
- if ((pCFileStruct->srch_inf.endOfSearch == FALSE) &&
- (pCFileStruct->invalidHandle == FALSE)) {
- pCFileStruct->invalidHandle = TRUE;
+ if (!pCFileStruct->srch_inf.endOfSearch &&
+ !pCFileStruct->invalidHandle) {
+ pCFileStruct->invalidHandle = true;
rc = CIFSFindClose(xid, pTcon, pCFileStruct->netfid);
cFYI(1, ("Closing uncompleted readdir with rc %d",
rc));
@@ -637,12 +637,12 @@
__u32 numLock = 0;
__u32 numUnlock = 0;
__u64 length;
- int wait_flag = FALSE;
+ bool wait_flag = false;
struct cifs_sb_info *cifs_sb;
struct cifsTconInfo *pTcon;
__u16 netfid;
__u8 lockType = LOCKING_ANDX_LARGE_FILES;
- int posix_locking;
+ bool posix_locking;
length = 1 + pfLock->fl_end - pfLock->fl_start;
rc = -EACCES;
@@ -659,7 +659,7 @@
cFYI(1, ("Flock"));
if (pfLock->fl_flags & FL_SLEEP) {
cFYI(1, ("Blocking lock"));
- wait_flag = TRUE;
+ wait_flag = true;
}
if (pfLock->fl_flags & FL_ACCESS)
cFYI(1, ("Process suspended by mandatory locking - "
@@ -794,7 +794,7 @@
stored_rc = CIFSSMBLock(xid, pTcon,
netfid,
li->length, li->offset,
- 1, 0, li->type, FALSE);
+ 1, 0, li->type, false);
if (stored_rc)
rc = stored_rc;
@@ -866,7 +866,7 @@
filemap_fdatawait from here so tell
reopen_file not to flush data to server
now */
- rc = cifs_reopen_file(file, FALSE);
+ rc = cifs_reopen_file(file, false);
if (rc != 0)
break;
}
@@ -966,7 +966,7 @@
filemap_fdatawait from here so tell
reopen_file not to flush data to
server now */
- rc = cifs_reopen_file(file, FALSE);
+ rc = cifs_reopen_file(file, false);
if (rc != 0)
break;
}
@@ -1093,7 +1093,7 @@
read_unlock(&GlobalSMBSeslock);
/* Had to unlock since following call can block */
- rc = cifs_reopen_file(open_file->pfile, FALSE);
+ rc = cifs_reopen_file(open_file->pfile, false);
if (!rc) {
if (!open_file->closePend)
return open_file;
@@ -1608,7 +1608,7 @@
int buf_type = CIFS_NO_BUFFER;
if ((open_file->invalidHandle) &&
(!open_file->closePend)) {
- rc = cifs_reopen_file(file, TRUE);
+ rc = cifs_reopen_file(file, true);
if (rc != 0)
break;
}
@@ -1693,7 +1693,7 @@
while (rc == -EAGAIN) {
if ((open_file->invalidHandle) &&
(!open_file->closePend)) {
- rc = cifs_reopen_file(file, TRUE);
+ rc = cifs_reopen_file(file, true);
if (rc != 0)
break;
}
@@ -1850,7 +1850,7 @@
while (rc == -EAGAIN) {
if ((open_file->invalidHandle) &&
(!open_file->closePend)) {
- rc = cifs_reopen_file(file, TRUE);
+ rc = cifs_reopen_file(file, true);
if (rc != 0)
break;
}
@@ -2009,10 +2009,10 @@
refreshing the inode only on increases in the file size
but this is tricky to do without racing with writebehind
page caching in the current Linux kernel design */
-int is_size_safe_to_change(struct cifsInodeInfo *cifsInode, __u64 end_of_file)
+bool is_size_safe_to_change(struct cifsInodeInfo *cifsInode, __u64 end_of_file)
{
if (!cifsInode)
- return 1;
+ return true;
if (is_inode_writable(cifsInode)) {
/* This inode is open for write at least once */
@@ -2022,15 +2022,15 @@
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO) {
/* since no page cache to corrupt on directio
we can change size safely */
- return 1;
+ return true;
}
if (i_size_read(&cifsInode->vfs_inode) < end_of_file)
- return 1;
+ return true;
- return 0;
+ return false;
} else
- return 1;
+ return true;
}
static int cifs_prepare_write(struct file *file, struct page *page,
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index e1031b9..fcbdbb6 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -281,7 +281,7 @@
struct cifs_sb_info *cifs_sb, int xid)
{
int rc;
- int oplock = FALSE;
+ int oplock = 0;
__u16 netfid;
struct cifsTconInfo *pTcon = cifs_sb->tcon;
char buf[24];
@@ -389,7 +389,7 @@
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
const unsigned char *full_path = NULL;
char *buf = NULL;
- int adjustTZ = FALSE;
+ bool adjustTZ = false;
bool is_dfs_referral = false;
pTcon = cifs_sb->tcon;
@@ -425,7 +425,7 @@
pfindData, cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
- adjustTZ = TRUE;
+ adjustTZ = true;
}
}
/* dump_mem("\nQPathInfo return data",&findData, sizeof(findData)); */
@@ -703,7 +703,7 @@
} else if (rc == -ENOENT) {
d_drop(direntry);
} else if (rc == -ETXTBSY) {
- int oplock = FALSE;
+ int oplock = 0;
__u16 netfid;
rc = CIFSSMBOpen(xid, pTcon, full_path, FILE_OPEN, DELETE,
@@ -736,7 +736,7 @@
rc = -EOPNOTSUPP;
if (rc == -EOPNOTSUPP) {
- int oplock = FALSE;
+ int oplock = 0;
__u16 netfid;
/* rc = CIFSSMBSetAttrLegacy(xid, pTcon,
full_path,
@@ -774,7 +774,7 @@
if (direntry->d_inode)
drop_nlink(direntry->d_inode);
} else if (rc == -ETXTBSY) {
- int oplock = FALSE;
+ int oplock = 0;
__u16 netfid;
rc = CIFSSMBOpen(xid, pTcon, full_path,
@@ -974,8 +974,8 @@
* failed to get it from the server or was set bogus */
if ((direntry->d_inode) && (direntry->d_inode->i_nlink < 2))
direntry->d_inode->i_nlink = 2;
+ mode &= ~current->fs->umask;
if (pTcon->unix_ext) {
- mode &= ~current->fs->umask;
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) {
CIFSSMBUnixSetPerms(xid, pTcon, full_path,
mode,
@@ -994,9 +994,16 @@
CIFS_MOUNT_MAP_SPECIAL_CHR);
}
} else {
- /* BB to be implemented via Windows secrty descriptors
- eg CIFSSMBWinSetPerms(xid, pTcon, full_path, mode,
- -1, -1, local_nls); */
+ if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) &&
+ (mode & S_IWUGO) == 0) {
+ FILE_BASIC_INFO pInfo;
+ memset(&pInfo, 0, sizeof(pInfo));
+ pInfo.Attributes = cpu_to_le32(ATTR_READONLY);
+ CIFSSMBSetTimes(xid, pTcon, full_path,
+ &pInfo, cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
+ }
if (direntry->d_inode) {
direntry->d_inode->i_mode = mode;
direntry->d_inode->i_mode |= S_IFDIR;
@@ -1149,7 +1156,7 @@
cFYI(1, ("rename rc %d", rc));
if ((rc == -EIO) || (rc == -EEXIST)) {
- int oplock = FALSE;
+ int oplock = 0;
__u16 netfid;
/* BB FIXME Is Generic Read correct for rename? */
@@ -1186,7 +1193,7 @@
struct cifsInodeInfo *cifsInode;
loff_t local_size;
struct timespec local_mtime;
- int invalidate_inode = FALSE;
+ bool invalidate_inode = false;
if (direntry->d_inode == NULL)
return -ENOENT;
@@ -1268,7 +1275,7 @@
only ones who could have modified the file and the
server copy is staler than ours */
} else {
- invalidate_inode = TRUE;
+ invalidate_inode = true;
}
}
@@ -1402,24 +1409,25 @@
int rc = -EACCES;
struct cifsFileInfo *open_file = NULL;
FILE_BASIC_INFO time_buf;
- int set_time = FALSE;
- int set_dosattr = FALSE;
+ bool set_time = false;
+ bool set_dosattr = false;
__u64 mode = 0xFFFFFFFFFFFFFFFFULL;
__u64 uid = 0xFFFFFFFFFFFFFFFFULL;
__u64 gid = 0xFFFFFFFFFFFFFFFFULL;
struct cifsInodeInfo *cifsInode;
+ struct inode *inode = direntry->d_inode;
xid = GetXid();
cFYI(1, ("setattr on file %s attrs->iavalid 0x%x",
direntry->d_name.name, attrs->ia_valid));
- cifs_sb = CIFS_SB(direntry->d_inode->i_sb);
+ cifs_sb = CIFS_SB(inode->i_sb);
pTcon = cifs_sb->tcon;
if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM) == 0) {
/* check if we have permission to change attrs */
- rc = inode_change_ok(direntry->d_inode, attrs);
+ rc = inode_change_ok(inode, attrs);
if (rc < 0) {
FreeXid(xid);
return rc;
@@ -1432,7 +1440,7 @@
FreeXid(xid);
return -ENOMEM;
}
- cifsInode = CIFS_I(direntry->d_inode);
+ cifsInode = CIFS_I(inode);
if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) {
/*
@@ -1443,9 +1451,9 @@
will be truncated anyway? Also, should we error out here if
the flush returns error?
*/
- rc = filemap_write_and_wait(direntry->d_inode->i_mapping);
+ rc = filemap_write_and_wait(inode->i_mapping);
if (rc != 0) {
- CIFS_I(direntry->d_inode)->write_behind_rc = rc;
+ cifsInode->write_behind_rc = rc;
rc = 0;
}
}
@@ -1464,7 +1472,7 @@
__u16 nfid = open_file->netfid;
__u32 npid = open_file->pid;
rc = CIFSSMBSetFileSize(xid, pTcon, attrs->ia_size,
- nfid, npid, FALSE);
+ nfid, npid, false);
atomic_dec(&open_file->wrtPending);
cFYI(1, ("SetFSize for attrs rc = %d", rc));
if ((rc == -EINVAL) || (rc == -EOPNOTSUPP)) {
@@ -1484,14 +1492,14 @@
it was found or because there was an error setting
it by handle */
rc = CIFSSMBSetEOF(xid, pTcon, full_path,
- attrs->ia_size, FALSE,
+ attrs->ia_size, false,
cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
cFYI(1, ("SetEOF by path (setattrs) rc = %d", rc));
if ((rc == -EINVAL) || (rc == -EOPNOTSUPP)) {
__u16 netfid;
- int oplock = FALSE;
+ int oplock = 0;
rc = SMBLegacyOpen(xid, pTcon, full_path,
FILE_OPEN,
@@ -1516,14 +1524,13 @@
/* Server is ok setting allocation size implicitly - no need
to call:
- CIFSSMBSetEOF(xid, pTcon, full_path, attrs->ia_size, TRUE,
+ CIFSSMBSetEOF(xid, pTcon, full_path, attrs->ia_size, true,
cifs_sb->local_nls);
*/
if (rc == 0) {
- rc = cifs_vmtruncate(direntry->d_inode, attrs->ia_size);
- cifs_truncate_page(direntry->d_inode->i_mapping,
- direntry->d_inode->i_size);
+ rc = cifs_vmtruncate(inode, attrs->ia_size);
+ cifs_truncate_page(inode->i_mapping, inode->i_size);
} else
goto cifs_setattr_exit;
}
@@ -1557,14 +1564,14 @@
rc = 0;
#ifdef CONFIG_CIFS_EXPERIMENTAL
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
- rc = mode_to_acl(direntry->d_inode, full_path, mode);
+ rc = mode_to_acl(inode, full_path, mode);
else if ((mode & S_IWUGO) == 0) {
#else
if ((mode & S_IWUGO) == 0) {
#endif
/* not writeable */
if ((cifsInode->cifsAttrs & ATTR_READONLY) == 0) {
- set_dosattr = TRUE;
+ set_dosattr = true;
time_buf.Attributes =
cpu_to_le32(cifsInode->cifsAttrs |
ATTR_READONLY);
@@ -1574,28 +1581,24 @@
not be able to write to it - so if any write
bit is enabled for user or group or other we
need to at least try to remove r/o dos attr */
- set_dosattr = TRUE;
+ set_dosattr = true;
time_buf.Attributes = cpu_to_le32(cifsInode->cifsAttrs &
(~ATTR_READONLY));
/* Windows ignores set to zero */
if (time_buf.Attributes == 0)
time_buf.Attributes |= cpu_to_le32(ATTR_NORMAL);
}
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
- mode_to_acl(direntry->d_inode, full_path, mode);
-#endif
}
if (attrs->ia_valid & ATTR_ATIME) {
- set_time = TRUE;
+ set_time = true;
time_buf.LastAccessTime =
cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_atime));
} else
time_buf.LastAccessTime = 0;
if (attrs->ia_valid & ATTR_MTIME) {
- set_time = TRUE;
+ set_time = true;
time_buf.LastWriteTime =
cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_mtime));
} else
@@ -1606,7 +1609,7 @@
server times */
if (set_time && (attrs->ia_valid & ATTR_CTIME)) {
- set_time = TRUE;
+ set_time = true;
/* Although Samba throws this field away
it may be useful to Windows - but we do
not want to set ctime unless some other
@@ -1630,7 +1633,7 @@
rc = -EOPNOTSUPP;
if (rc == -EOPNOTSUPP) {
- int oplock = FALSE;
+ int oplock = 0;
__u16 netfid;
cFYI(1, ("calling SetFileInfo since SetPathInfo for "
@@ -1669,7 +1672,7 @@
/* do not need local check to inode_check_ok since the server does
that */
if (!rc)
- rc = inode_setattr(direntry->d_inode, attrs);
+ rc = inode_setattr(inode, attrs);
cifs_setattr_exit:
kfree(full_path);
FreeXid(xid);
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index d4e7ec9..1c2c3ce 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -230,7 +230,7 @@
struct inode *inode = direntry->d_inode;
int rc = -EACCES;
int xid;
- int oplock = FALSE;
+ int oplock = 0;
struct cifs_sb_info *cifs_sb;
struct cifsTconInfo *pTcon;
char *full_path = NULL;
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index 2a42d9f..1d69b80 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -496,7 +496,8 @@
}
return 0;
}
-int
+
+bool
is_valid_oplock_break(struct smb_hdr *buf, struct TCP_Server_Info *srv)
{
struct smb_com_lock_req *pSMB = (struct smb_com_lock_req *)buf;
@@ -522,17 +523,17 @@
pnotify->Action)); /* BB removeme BB */
/* cifs_dump_mem("Rcvd notify Data: ",buf,
sizeof(struct smb_hdr)+60); */
- return TRUE;
+ return true;
}
if (pSMBr->hdr.Status.CifsError) {
cFYI(1, ("notify err 0x%d",
pSMBr->hdr.Status.CifsError));
- return TRUE;
+ return true;
}
- return FALSE;
+ return false;
}
if (pSMB->hdr.Command != SMB_COM_LOCKING_ANDX)
- return FALSE;
+ return false;
if (pSMB->hdr.Flags & SMBFLG_RESPONSE) {
/* no sense logging error on invalid handle on oplock
break - harmless race between close request and oplock
@@ -541,21 +542,21 @@
if ((NT_STATUS_INVALID_HANDLE) ==
le32_to_cpu(pSMB->hdr.Status.CifsError)) {
cFYI(1, ("invalid handle on oplock break"));
- return TRUE;
+ return true;
} else if (ERRbadfid ==
le16_to_cpu(pSMB->hdr.Status.DosError.Error)) {
- return TRUE;
+ return true;
} else {
- return FALSE; /* on valid oplock brk we get "request" */
+ return false; /* on valid oplock brk we get "request" */
}
}
if (pSMB->hdr.WordCount != 8)
- return FALSE;
+ return false;
cFYI(1, ("oplock type 0x%d level 0x%d",
pSMB->LockType, pSMB->OplockLevel));
if (!(pSMB->LockType & LOCKING_ANDX_OPLOCK_RELEASE))
- return FALSE;
+ return false;
/* look up tcon based on tid & uid */
read_lock(&GlobalSMBSeslock);
@@ -573,11 +574,11 @@
("file id match, oplock break"));
pCifsInode =
CIFS_I(netfile->pInode);
- pCifsInode->clientCanCacheAll = FALSE;
+ pCifsInode->clientCanCacheAll = false;
if (pSMB->OplockLevel == 0)
pCifsInode->clientCanCacheRead
- = FALSE;
- pCifsInode->oplockPending = TRUE;
+ = false;
+ pCifsInode->oplockPending = true;
AllocOplockQEntry(netfile->pInode,
netfile->netfid,
tcon);
@@ -585,17 +586,17 @@
("about to wake up oplock thread"));
if (oplockThread)
wake_up_process(oplockThread);
- return TRUE;
+ return true;
}
}
read_unlock(&GlobalSMBSeslock);
cFYI(1, ("No matching file for oplock break"));
- return TRUE;
+ return true;
}
}
read_unlock(&GlobalSMBSeslock);
cFYI(1, ("Can not process oplock break for non-existent connection"));
- return TRUE;
+ return true;
}
void
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index 3b5a5ce..00f4cff 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -132,47 +132,17 @@
{0, 0}
};
-
-/* if the mount helper is missing we need to reverse the 1st slash
- from '/' to backslash in order to format the UNC properly for
- ip address parsing and for tree connect (unless the user
- remembered to put the UNC name in properly). Fortunately we do
- not have to call this twice (we check for IPv4 addresses
- first, so it is already converted by the time we
- try IPv6 addresses */
-static int canonicalize_unc(char *cp)
-{
- int i;
-
- for (i = 0; i <= 46 /* INET6_ADDRSTRLEN */ ; i++) {
- if (cp[i] == 0)
- break;
- if (cp[i] == '\\')
- break;
- if (cp[i] == '/') {
- cFYI(DBG2, ("change slash to \\ in malformed UNC"));
- cp[i] = '\\';
- return 1;
- }
- }
- return 0;
-}
-
/* Convert string containing dotted ip address to binary form */
/* returns 0 if invalid address */
int
-cifs_inet_pton(int address_family, char *cp, void *dst)
+cifs_inet_pton(const int address_family, const char *cp, void *dst)
{
int ret = 0;
/* calculate length by finding first slash or NULL */
if (address_family == AF_INET) {
ret = in4_pton(cp, -1 /* len */, dst, '\\', NULL);
- if (ret == 0) {
- if (canonicalize_unc(cp))
- ret = in4_pton(cp, -1, dst, '\\', NULL);
- }
} else if (address_family == AF_INET6) {
ret = in6_pton(cp, -1 /* len */, dst , '\\', NULL);
}
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 32b445ed..34ec3210 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -447,8 +447,8 @@
if (file->private_data == NULL)
return -ENOMEM;
cifsFile = file->private_data;
- cifsFile->invalidHandle = TRUE;
- cifsFile->srch_inf.endOfSearch = FALSE;
+ cifsFile->invalidHandle = true;
+ cifsFile->srch_inf.endOfSearch = false;
cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
if (cifs_sb == NULL)
@@ -485,7 +485,7 @@
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR, CIFS_DIR_SEP(cifs_sb));
if (rc == 0)
- cifsFile->invalidHandle = FALSE;
+ cifsFile->invalidHandle = false;
if ((rc == -EOPNOTSUPP) &&
(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)) {
cifs_sb->mnt_cifs_flags &= ~CIFS_MOUNT_SERVER_INUM;
@@ -670,7 +670,7 @@
(index_to_find < first_entry_in_buffer)) {
/* close and restart search */
cFYI(1, ("search backing up - close and restart search"));
- cifsFile->invalidHandle = TRUE;
+ cifsFile->invalidHandle = true;
CIFSFindClose(xid, pTcon, cifsFile->netfid);
kfree(cifsFile->search_resume_name);
cifsFile->search_resume_name = NULL;
@@ -692,7 +692,7 @@
}
while ((index_to_find >= cifsFile->srch_inf.index_of_last_entry) &&
- (rc == 0) && (cifsFile->srch_inf.endOfSearch == FALSE)) {
+ (rc == 0) && !cifsFile->srch_inf.endOfSearch) {
cFYI(1, ("calling findnext2"));
rc = CIFSFindNext(xid, pTcon, cifsFile->netfid,
&cifsFile->srch_inf);
@@ -1038,7 +1038,7 @@
break;
}
} /* else {
- cifsFile->invalidHandle = TRUE;
+ cifsFile->invalidHandle = true;
CIFSFindClose(xid, pTcon, cifsFile->netfid);
}
kfree(cifsFile->search_resume_name);
diff --git a/fs/cifs/smbencrypt.c b/fs/cifs/smbencrypt.c
index 58bbfd9..ff3232f 100644
--- a/fs/cifs/smbencrypt.c
+++ b/fs/cifs/smbencrypt.c
@@ -35,11 +35,11 @@
#include "cifs_debug.h"
#include "cifsencrypt.h"
-#ifndef FALSE
-#define FALSE 0
+#ifndef false
+#define false 0
#endif
-#ifndef TRUE
-#define TRUE 1
+#ifndef true
+#define true 1
#endif
/* following came from the other byteorder.h to avoid include conflicts */
diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c
index 8cd6a44..e9527ee 100644
--- a/fs/cifs/xattr.c
+++ b/fs/cifs/xattr.c
@@ -264,7 +264,7 @@
#ifdef CONFIG_CIFS_EXPERIMENTAL
else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
__u16 fid;
- int oplock = FALSE;
+ int oplock = 0;
struct cifs_ntsd *pacl = NULL;
__u32 buflen = 0;
if (experimEnabled)
diff --git a/fs/compat.c b/fs/compat.c
index 139dc93..332a869 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -24,6 +24,7 @@
#include <linux/fcntl.h>
#include <linux/namei.h>
#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/vfs.h>
#include <linux/ioctl.h>
#include <linux/init.h>
diff --git a/fs/dnotify.c b/fs/dnotify.c
index eaecc4c..676073b 100644
--- a/fs/dnotify.c
+++ b/fs/dnotify.c
@@ -20,7 +20,7 @@
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
-#include <linux/file.h>
+#include <linux/fdtable.h>
int dir_notify_enable __read_mostly = 1;
diff --git a/fs/dquot.c b/fs/dquot.c
index dfba162..5ac77da 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -1491,6 +1491,16 @@
/* We need to serialize quota_off() for device */
mutex_lock(&dqopt->dqonoff_mutex);
+
+ /*
+ * Skip everything if there's nothing to do. We have to do this because
+ * sometimes we are called when fill_super() failed and calling
+ * sync_fs() in such cases does no good.
+ */
+ if (!sb_any_quota_enabled(sb) && !sb_any_quota_suspended(sb)) {
+ mutex_unlock(&dqopt->dqonoff_mutex);
+ return 0;
+ }
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
toputinode[cnt] = NULL;
if (type != -1 && cnt != type)
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 0a13973..c92cc1c 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -37,17 +37,11 @@
{
struct dentry *dir;
- dir = dget(dentry->d_parent);
+ dir = dget_parent(dentry);
mutex_lock_nested(&(dir->d_inode->i_mutex), I_MUTEX_PARENT);
return dir;
}
-static void unlock_parent(struct dentry *dentry)
-{
- mutex_unlock(&(dentry->d_parent->d_inode->i_mutex));
- dput(dentry->d_parent);
-}
-
static void unlock_dir(struct dentry *dir)
{
mutex_unlock(&dir->d_inode->i_mutex);
@@ -426,8 +420,9 @@
int rc = 0;
struct dentry *lower_dentry = ecryptfs_dentry_to_lower(dentry);
struct inode *lower_dir_inode = ecryptfs_inode_to_lower(dir);
+ struct dentry *lower_dir_dentry;
- lock_parent(lower_dentry);
+ lower_dir_dentry = lock_parent(lower_dentry);
rc = vfs_unlink(lower_dir_inode, lower_dentry);
if (rc) {
printk(KERN_ERR "Error in vfs_unlink; rc = [%d]\n", rc);
@@ -439,7 +434,7 @@
dentry->d_inode->i_ctime = dir->i_ctime;
d_drop(dentry);
out_unlock:
- unlock_parent(lower_dentry);
+ unlock_dir(lower_dir_dentry);
return rc;
}
diff --git a/fs/ecryptfs/miscdev.c b/fs/ecryptfs/miscdev.c
index 788995e..6560da1 100644
--- a/fs/ecryptfs/miscdev.c
+++ b/fs/ecryptfs/miscdev.c
@@ -257,12 +257,14 @@
mutex_lock(&daemon->mux);
if (daemon->flags & ECRYPTFS_DAEMON_ZOMBIE) {
rc = 0;
+ mutex_unlock(&ecryptfs_daemon_hash_mux);
printk(KERN_WARNING "%s: Attempt to read from zombified "
"daemon\n", __func__);
goto out_unlock_daemon;
}
if (daemon->flags & ECRYPTFS_DAEMON_IN_READ) {
rc = 0;
+ mutex_unlock(&ecryptfs_daemon_hash_mux);
goto out_unlock_daemon;
}
/* This daemon will not go away so long as this flag is set */
diff --git a/fs/eventfd.c b/fs/eventfd.c
index a9f130c..343942d 100644
--- a/fs/eventfd.c
+++ b/fs/eventfd.c
@@ -200,10 +200,8 @@
asmlinkage long sys_eventfd(unsigned int count)
{
- int error, fd;
+ int fd;
struct eventfd_ctx *ctx;
- struct file *file;
- struct inode *inode;
ctx = kmalloc(sizeof(*ctx), GFP_KERNEL);
if (!ctx)
@@ -216,12 +214,9 @@
* When we call this, the initialization must be complete, since
* anon_inode_getfd() will install the fd.
*/
- error = anon_inode_getfd(&fd, &inode, &file, "[eventfd]",
- &eventfd_fops, ctx);
- if (!error)
- return fd;
-
- kfree(ctx);
- return error;
+ fd = anon_inode_getfd("[eventfd]", &eventfd_fops, ctx);
+ if (fd < 0)
+ kfree(ctx);
+ return fd;
}
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 221086f..990c01d 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1050,8 +1050,6 @@
{
int error, fd = -1;
struct eventpoll *ep;
- struct inode *inode;
- struct file *file;
DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d)\n",
current, size));
@@ -1061,29 +1059,24 @@
* structure ( "struct eventpoll" ).
*/
error = -EINVAL;
- if (size <= 0 || (error = ep_alloc(&ep)) != 0)
+ if (size <= 0 || (error = ep_alloc(&ep)) < 0) {
+ fd = error;
goto error_return;
+ }
/*
* Creates all the items needed to setup an eventpoll file. That is,
- * a file structure, and inode and a free file descriptor.
+ * a file structure and a free file descriptor.
*/
- error = anon_inode_getfd(&fd, &inode, &file, "[eventpoll]",
- &eventpoll_fops, ep);
- if (error)
- goto error_free;
+ fd = anon_inode_getfd("[eventpoll]", &eventpoll_fops, ep);
+ if (fd < 0)
+ ep_free(ep);
+error_return:
DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d) = %d\n",
current, size, fd));
return fd;
-
-error_free:
- ep_free(ep);
-error_return:
- DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d) = %d\n",
- current, size, error));
- return error;
}
/*
diff --git a/fs/exec.c b/fs/exec.c
index 9f9f931..1f8a24a 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -24,6 +24,7 @@
#include <linux/slab.h>
#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/mman.h>
#include <linux/a.out.h>
#include <linux/stat.h>
@@ -735,7 +736,7 @@
tsk->active_mm = mm;
activate_mm(active_mm, mm);
task_unlock(tsk);
- mm_update_next_owner(mm);
+ mm_update_next_owner(old_mm);
arch_pick_mmap_layout(mm);
if (old_mm) {
up_read(&old_mm->mmap_sem);
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index fbec2ef..b128bdc 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -2639,8 +2639,7 @@
struct proc_dir_entry *proc;
char devname[64];
- snprintf(devname, sizeof(devname) - 1, "%s",
- bdevname(sb->s_bdev, devname));
+ bdevname(sb->s_bdev, devname);
sbi->s_mb_proc = proc_mkdir(devname, proc_root_ext4);
MB_PROC_HANDLER(EXT4_MB_STATS_NAME, stats);
@@ -2674,8 +2673,7 @@
if (sbi->s_mb_proc == NULL)
return -EINVAL;
- snprintf(devname, sizeof(devname) - 1, "%s",
- bdevname(sb->s_bdev, devname));
+ bdevname(sb->s_bdev, devname);
remove_proc_entry(EXT4_MB_GROUP_PREALLOC, sbi->s_mb_proc);
remove_proc_entry(EXT4_MB_STREAM_REQ, sbi->s_mb_proc);
remove_proc_entry(EXT4_MB_ORDER2_REQ, sbi->s_mb_proc);
diff --git a/fs/fcntl.c b/fs/fcntl.c
index 3f3ac63..bfd7765 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -9,6 +9,7 @@
#include <linux/mm.h>
#include <linux/fs.h>
#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/capability.h>
#include <linux/dnotify.h>
#include <linux/smp_lock.h>
diff --git a/fs/file.c b/fs/file.c
index 5110acb1..4c6f0ea 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -12,6 +12,7 @@
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/bitops.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
@@ -149,8 +150,16 @@
nr /= (1024 / sizeof(struct file *));
nr = roundup_pow_of_two(nr + 1);
nr *= (1024 / sizeof(struct file *));
- if (nr > sysctl_nr_open)
- nr = sysctl_nr_open;
+ /*
+ * Note that this can drive nr *below* what we had passed if sysctl_nr_open
+ * had been set lower between the check in expand_files() and here. Deal
+ * with that in caller, it's cheaper that way.
+ *
+ * We make sure that nr remains a multiple of BITS_PER_LONG - otherwise
+ * bitmaps handling below becomes unpleasant, to put it mildly...
+ */
+ if (unlikely(nr > sysctl_nr_open))
+ nr = ((sysctl_nr_open - 1) | (BITS_PER_LONG - 1)) + 1;
fdt = kmalloc(sizeof(struct fdtable), GFP_KERNEL);
if (!fdt)
@@ -199,6 +208,16 @@
if (!new_fdt)
return -ENOMEM;
/*
+ * extremely unlikely race - sysctl_nr_open decreased between the check in
+ * caller and alloc_fdtable(). Cheaper to catch it here...
+ */
+ if (unlikely(new_fdt->max_fds <= nr)) {
+ free_fdarr(new_fdt);
+ free_fdset(new_fdt);
+ kfree(new_fdt);
+ return -EMFILE;
+ }
+ /*
* Check again since another task may have expanded the fd table while
* we dropped the lock
*/
diff --git a/fs/file_table.c b/fs/file_table.c
index 7a0a9b8..8308422 100644
--- a/fs/file_table.c
+++ b/fs/file_table.c
@@ -8,6 +8,7 @@
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/fs.h>
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 9ced35b..8092f0d 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -804,6 +804,8 @@
if (offset == PAGE_CACHE_SIZE)
offset = 0;
+ if (!fc->big_writes)
+ break;
} while (iov_iter_count(ii) && count < fc->max_write &&
req->num_pages < FUSE_MAX_PAGES_PER_REQ && offset == 0);
@@ -934,7 +936,7 @@
nbytes = min(nbytes, (unsigned) FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT);
npages = (nbytes + offset + PAGE_SIZE - 1) >> PAGE_SHIFT;
- npages = min(max(npages, 1), FUSE_MAX_PAGES_PER_REQ);
+ npages = clamp(npages, 1, FUSE_MAX_PAGES_PER_REQ);
down_read(¤t->mm->mmap_sem);
npages = get_user_pages(current, current->mm, user_addr, npages, write,
0, req->pages, NULL);
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index dadffa2..bae9486 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -404,6 +404,9 @@
/** Is bmap not implemented by fs? */
unsigned no_bmap : 1;
+ /** Do multi-page cached writes */
+ unsigned big_writes : 1;
+
/** The number of requests waiting for completion */
atomic_t num_waiting;
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 79b6158..fb77e09 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -576,6 +576,8 @@
fc->no_lock = 1;
if (arg->flags & FUSE_ATOMIC_O_TRUNC)
fc->atomic_o_trunc = 1;
+ if (arg->flags & FUSE_BIG_WRITES)
+ fc->big_writes = 1;
} else {
ra_pages = fc->max_read / PAGE_CACHE_SIZE;
fc->no_lock = 1;
@@ -599,7 +601,8 @@
arg->major = FUSE_KERNEL_VERSION;
arg->minor = FUSE_KERNEL_MINOR_VERSION;
arg->max_readahead = fc->bdi.ra_pages * PAGE_CACHE_SIZE;
- arg->flags |= FUSE_ASYNC_READ | FUSE_POSIX_LOCKS | FUSE_ATOMIC_O_TRUNC;
+ arg->flags |= FUSE_ASYNC_READ | FUSE_POSIX_LOCKS | FUSE_ATOMIC_O_TRUNC |
+ FUSE_BIG_WRITES;
req->in.h.opcode = FUSE_INIT;
req->in.numargs = 1;
req->in.args[0].size = sizeof(*arg);
diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c
index d53b2af..67e1c8b 100644
--- a/fs/hfsplus/inode.c
+++ b/fs/hfsplus/inode.c
@@ -65,6 +65,8 @@
BUG();
return 0;
}
+ if (!tree)
+ return 0;
if (tree->node_size >= PAGE_CACHE_SIZE) {
nidx = page->index >> (tree->node_size_shift - PAGE_CACHE_SHIFT);
spin_lock(&tree->hash_lock);
diff --git a/fs/hppfs/Makefile b/fs/hppfs/Makefile
index 6890433..8a1f5034 100644
--- a/fs/hppfs/Makefile
+++ b/fs/hppfs/Makefile
@@ -1,9 +1,9 @@
#
-# Copyright (C) 2002, 2003 Jeff Dike (jdike@karaya.com)
+# Copyright (C) 2002 - 2008 Jeff Dike (jdike@{addtoit,linux.intel}.com)
# Licensed under the GPL
#
-hppfs-objs := hppfs_kern.o
+hppfs-objs := hppfs.o
obj-y =
-obj-$(CONFIG_HPPFS) += hppfs.o
+obj-$(CONFIG_HPPFS) += $(hppfs-objs)
diff --git a/fs/hppfs/hppfs_kern.c b/fs/hppfs/hppfs.c
similarity index 91%
rename from fs/hppfs/hppfs_kern.c
rename to fs/hppfs/hppfs.c
index 8601d8e..65077aa 100644
--- a/fs/hppfs/hppfs_kern.c
+++ b/fs/hppfs/hppfs.c
@@ -33,7 +33,7 @@
};
struct hppfs_inode_info {
- struct dentry *proc_dentry;
+ struct dentry *proc_dentry;
struct inode vfs_inode;
};
@@ -52,7 +52,7 @@
int i;
sb = dentry->d_sb;
- if ((sb->s_op != &hppfs_sbops) || (dentry->d_parent != sb->s_root))
+ if (dentry->d_parent != sb->s_root)
return 0;
for (i = 0; i < dentry->d_name.len; i++) {
@@ -136,7 +136,7 @@
}
static struct dentry *hppfs_lookup(struct inode *ino, struct dentry *dentry,
- struct nameidata *nd)
+ struct nameidata *nd)
{
struct dentry *proc_dentry, *new, *parent;
struct inode *inode;
@@ -254,6 +254,8 @@
int err;
if (hppfs->contents != NULL) {
+ int rem;
+
if (*ppos >= hppfs->len)
return 0;
@@ -267,8 +269,10 @@
if (off + count > hppfs->len)
count = hppfs->len - off;
- copy_to_user(buf, &data->contents[off], count);
- *ppos += count;
+ rem = copy_to_user(buf, &data->contents[off], count);
+ *ppos += count - rem;
+ if (rem > 0)
+ return -EFAULT;
} else if (hppfs->host_fd != -1) {
err = os_seek_file(hppfs->host_fd, *ppos);
if (err) {
@@ -285,21 +289,15 @@
return count;
}
-static ssize_t hppfs_write(struct file *file, const char __user *buf, size_t len,
- loff_t *ppos)
+static ssize_t hppfs_write(struct file *file, const char __user *buf,
+ size_t len, loff_t *ppos)
{
struct hppfs_private *data = file->private_data;
struct file *proc_file = data->proc_file;
ssize_t (*write)(struct file *, const char __user *, size_t, loff_t *);
- int err;
write = proc_file->f_path.dentry->d_inode->i_fop->write;
-
- proc_file->f_pos = file->f_pos;
- err = (*write)(proc_file, buf, len, &proc_file->f_pos);
- file->f_pos = proc_file->f_pos;
-
- return err;
+ return (*write)(proc_file, buf, len, ppos);
}
static int open_host_sock(char *host_file, int *filter_out)
@@ -357,7 +355,7 @@
if (filter) {
while ((n = read_proc(proc_file, data->contents,
- sizeof(data->contents), NULL, 0)) > 0)
+ sizeof(data->contents), NULL, 0)) > 0)
os_write_file(fd, data->contents, n);
err = os_shutdown_socket(fd, 0, 1);
if (err) {
@@ -429,8 +427,8 @@
static int hppfs_open(struct inode *inode, struct file *file)
{
struct hppfs_private *data;
- struct dentry *proc_dentry;
struct vfsmount *proc_mnt;
+ struct dentry *proc_dentry;
char *host_file;
int err, fd, type, filter;
@@ -492,8 +490,8 @@
static int hppfs_dir_open(struct inode *inode, struct file *file)
{
struct hppfs_private *data;
- struct dentry *proc_dentry;
struct vfsmount *proc_mnt;
+ struct dentry *proc_dentry;
int err;
err = -ENOMEM;
@@ -620,6 +618,9 @@
void hppfs_delete_inode(struct inode *ino)
{
+ dput(HPPFS_I(ino)->proc_dentry);
+ mntput(ino->i_sb->s_fs_info);
+
clear_inode(ino);
}
@@ -628,69 +629,46 @@
kfree(HPPFS_I(inode));
}
-static void hppfs_put_super(struct super_block *sb)
-{
- mntput(sb->s_fs_info);
-}
-
static const struct super_operations hppfs_sbops = {
.alloc_inode = hppfs_alloc_inode,
.destroy_inode = hppfs_destroy_inode,
.delete_inode = hppfs_delete_inode,
.statfs = hppfs_statfs,
- .put_super = hppfs_put_super,
};
static int hppfs_readlink(struct dentry *dentry, char __user *buffer,
int buflen)
{
- struct file *proc_file;
struct dentry *proc_dentry;
- struct vfsmount *proc_mnt;
- int ret;
proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
- proc_mnt = dentry->d_sb->s_fs_info;
-
- proc_file = dentry_open(dget(proc_dentry), mntget(proc_mnt), O_RDONLY);
- if (IS_ERR(proc_file))
- return PTR_ERR(proc_file);
-
- ret = proc_dentry->d_inode->i_op->readlink(proc_dentry, buffer, buflen);
-
- fput(proc_file);
-
- return ret;
+ return proc_dentry->d_inode->i_op->readlink(proc_dentry, buffer,
+ buflen);
}
-static void* hppfs_follow_link(struct dentry *dentry, struct nameidata *nd)
+static void *hppfs_follow_link(struct dentry *dentry, struct nameidata *nd)
{
- struct file *proc_file;
struct dentry *proc_dentry;
- struct vfsmount *proc_mnt;
- void *ret;
proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
- proc_mnt = dentry->d_sb->s_fs_info;
- proc_file = dentry_open(dget(proc_dentry), mntget(proc_mnt), O_RDONLY);
- if (IS_ERR(proc_file))
- return proc_file;
+ return proc_dentry->d_inode->i_op->follow_link(proc_dentry, nd);
+}
- ret = proc_dentry->d_inode->i_op->follow_link(proc_dentry, nd);
-
- fput(proc_file);
-
- return ret;
+int hppfs_permission(struct inode *inode, int mask, struct nameidata *nd)
+{
+ return generic_permission(inode, mask, NULL);
}
static const struct inode_operations hppfs_dir_iops = {
.lookup = hppfs_lookup,
+ .permission = hppfs_permission,
};
static const struct inode_operations hppfs_link_iops = {
.readlink = hppfs_readlink,
.follow_link = hppfs_follow_link,
+ .permission = hppfs_permission,
};
static struct inode *get_inode(struct super_block *sb, struct dentry *dentry)
@@ -712,7 +690,7 @@
inode->i_fop = &hppfs_file_fops;
}
- HPPFS_I(inode)->proc_dentry = dentry;
+ HPPFS_I(inode)->proc_dentry = dget(dentry);
inode->i_uid = proc_ino->i_uid;
inode->i_gid = proc_ino->i_gid;
@@ -725,7 +703,7 @@
inode->i_size = proc_ino->i_size;
inode->i_blocks = proc_ino->i_blocks;
- return 0;
+ return inode;
}
static int hppfs_fill_super(struct super_block *sb, void *d, int silent)
diff --git a/fs/inode.c b/fs/inode.c
index bf64781..c36d948 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -1149,13 +1149,8 @@
void iput(struct inode *inode)
{
if (inode) {
- const struct super_operations *op = inode->i_sb->s_op;
-
BUG_ON(inode->i_state == I_CLEAR);
- if (op && op->put_inode)
- op->put_inode(inode);
-
if (atomic_dec_and_lock(&inode->i_count, &inode_lock))
iput_final(inode);
}
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 53632e3..2e24567 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -901,7 +901,7 @@
{
char name[BDEVNAME_SIZE];
- snprintf(name, sizeof(name) - 1, "%s", bdevname(journal->j_dev, name));
+ bdevname(journal->j_dev, name);
journal->j_proc_entry = proc_mkdir(name, proc_jbd2_stats);
if (journal->j_proc_entry) {
proc_create_data("history", S_IRUGO, journal->j_proc_entry,
@@ -915,7 +915,7 @@
{
char name[BDEVNAME_SIZE];
- snprintf(name, sizeof(name) - 1, "%s", bdevname(journal->j_dev, name));
+ bdevname(journal->j_dev, name);
remove_proc_entry("info", journal->j_proc_entry);
remove_proc_entry("history", journal->j_proc_entry);
remove_proc_entry(name, proc_jbd2_stats);
diff --git a/fs/jffs2/build.c b/fs/jffs2/build.c
index d58f845..c5e1450 100644
--- a/fs/jffs2/build.c
+++ b/fs/jffs2/build.c
@@ -46,7 +46,7 @@
static void jffs2_build_inode_pass1(struct jffs2_sb_info *c,
- struct jffs2_inode_cache *ic)
+ struct jffs2_inode_cache *ic)
{
struct jffs2_full_dirent *fd;
@@ -68,11 +68,17 @@
continue;
}
- if (child_ic->nlink++ && fd->type == DT_DIR) {
- JFFS2_ERROR("child dir \"%s\" (ino #%u) of dir ino #%u appears to be a hard link\n",
- fd->name, fd->ino, ic->ino);
- /* TODO: What do we do about it? */
- }
+ if (fd->type == DT_DIR) {
+ if (child_ic->pino_nlink) {
+ JFFS2_ERROR("child dir \"%s\" (ino #%u) of dir ino #%u appears to be a hard link\n",
+ fd->name, fd->ino, ic->ino);
+ /* TODO: What do we do about it? */
+ } else {
+ child_ic->pino_nlink = ic->ino;
+ }
+ } else
+ child_ic->pino_nlink++;
+
dbg_fsbuild("increased nlink for child \"%s\" (ino #%u)\n", fd->name, fd->ino);
/* Can't free scan_dents so far. We might need them in pass 2 */
}
@@ -125,7 +131,7 @@
dbg_fsbuild("pass 2 starting\n");
for_each_inode(i, c, ic) {
- if (ic->nlink)
+ if (ic->pino_nlink)
continue;
jffs2_build_remove_unlinked_inode(c, ic, &dead_fds);
@@ -232,16 +238,19 @@
/* Reduce nlink of the child. If it's now zero, stick it on the
dead_fds list to be cleaned up later. Else just free the fd */
- child_ic->nlink--;
+ if (fd->type == DT_DIR)
+ child_ic->pino_nlink = 0;
+ else
+ child_ic->pino_nlink--;
- if (!child_ic->nlink) {
- dbg_fsbuild("inode #%u (\"%s\") has now got zero nlink, adding to dead_fds list.\n",
+ if (!child_ic->pino_nlink) {
+ dbg_fsbuild("inode #%u (\"%s\") now has no links; adding to dead_fds list.\n",
fd->ino, fd->name);
fd->next = *dead_fds;
*dead_fds = fd;
} else {
dbg_fsbuild("inode #%u (\"%s\") has now got nlink %d. Ignoring.\n",
- fd->ino, fd->name, child_ic->nlink);
+ fd->ino, fd->name, child_ic->pino_nlink);
jffs2_free_full_dirent(fd);
}
}
diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
index c63e7a9..c0c141f 100644
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -208,6 +208,13 @@
f = JFFS2_INODE_INFO(inode);
dir_f = JFFS2_INODE_INFO(dir_i);
+ /* jffs2_do_create() will want to lock it, _after_ reserving
+ space and taking c-alloc_sem. If we keep it locked here,
+ lockdep gets unhappy (although it's a false positive;
+ nothing else will be looking at this inode yet so there's
+ no chance of AB-BA deadlock involving its f->sem). */
+ mutex_unlock(&f->sem);
+
ret = jffs2_do_create(c, dir_f, f, ri,
dentry->d_name.name, dentry->d_name.len);
if (ret)
@@ -219,7 +226,8 @@
d_instantiate(dentry, inode);
D1(printk(KERN_DEBUG "jffs2_create: Created ino #%lu with mode %o, nlink %d(%d). nrpages %ld\n",
- inode->i_ino, inode->i_mode, inode->i_nlink, f->inocache->nlink, inode->i_mapping->nrpages));
+ inode->i_ino, inode->i_mode, inode->i_nlink,
+ f->inocache->pino_nlink, inode->i_mapping->nrpages));
return 0;
fail:
@@ -243,7 +251,7 @@
ret = jffs2_do_unlink(c, dir_f, dentry->d_name.name,
dentry->d_name.len, dead_f, now);
if (dead_f->inocache)
- dentry->d_inode->i_nlink = dead_f->inocache->nlink;
+ dentry->d_inode->i_nlink = dead_f->inocache->pino_nlink;
if (!ret)
dir_i->i_mtime = dir_i->i_ctime = ITIME(now);
return ret;
@@ -276,7 +284,7 @@
if (!ret) {
mutex_lock(&f->sem);
- old_dentry->d_inode->i_nlink = ++f->inocache->nlink;
+ old_dentry->d_inode->i_nlink = ++f->inocache->pino_nlink;
mutex_unlock(&f->sem);
d_instantiate(dentry, old_dentry->d_inode);
dir_i->i_mtime = dir_i->i_ctime = ITIME(now);
@@ -493,11 +501,14 @@
inode->i_op = &jffs2_dir_inode_operations;
inode->i_fop = &jffs2_dir_operations;
- /* Directories get nlink 2 at start */
- inode->i_nlink = 2;
f = JFFS2_INODE_INFO(inode);
+ /* Directories get nlink 2 at start */
+ inode->i_nlink = 2;
+ /* but ic->pino_nlink is the parent ino# */
+ f->inocache->pino_nlink = dir_i->i_ino;
+
ri->data_crc = cpu_to_je32(0);
ri->node_crc = cpu_to_je32(crc32(0, ri, sizeof(*ri)-8));
@@ -594,17 +605,25 @@
static int jffs2_rmdir (struct inode *dir_i, struct dentry *dentry)
{
+ struct jffs2_sb_info *c = JFFS2_SB_INFO(dir_i->i_sb);
+ struct jffs2_inode_info *dir_f = JFFS2_INODE_INFO(dir_i);
struct jffs2_inode_info *f = JFFS2_INODE_INFO(dentry->d_inode);
struct jffs2_full_dirent *fd;
int ret;
+ uint32_t now = get_seconds();
for (fd = f->dents ; fd; fd = fd->next) {
if (fd->ino)
return -ENOTEMPTY;
}
- ret = jffs2_unlink(dir_i, dentry);
- if (!ret)
+
+ ret = jffs2_do_unlink(c, dir_f, dentry->d_name.name,
+ dentry->d_name.len, f, now);
+ if (!ret) {
+ dir_i->i_mtime = dir_i->i_ctime = ITIME(now);
+ clear_nlink(dentry->d_inode);
drop_nlink(dir_i);
+ }
return ret;
}
@@ -817,7 +836,10 @@
inode which didn't exist. */
if (victim_f->inocache) {
mutex_lock(&victim_f->sem);
- victim_f->inocache->nlink--;
+ if (S_ISDIR(new_dentry->d_inode->i_mode))
+ victim_f->inocache->pino_nlink = 0;
+ else
+ victim_f->inocache->pino_nlink--;
mutex_unlock(&victim_f->sem);
}
}
@@ -838,8 +860,8 @@
struct jffs2_inode_info *f = JFFS2_INODE_INFO(old_dentry->d_inode);
mutex_lock(&f->sem);
inc_nlink(old_dentry->d_inode);
- if (f->inocache)
- f->inocache->nlink++;
+ if (f->inocache && !S_ISDIR(old_dentry->d_inode->i_mode))
+ f->inocache->pino_nlink++;
mutex_unlock(&f->sem);
printk(KERN_NOTICE "jffs2_rename(): Link succeeded, unlink failed (err %d). You now have a hard link\n", ret);
diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c
index 25a640e..dddb2a6 100644
--- a/fs/jffs2/erase.c
+++ b/fs/jffs2/erase.c
@@ -294,7 +294,7 @@
break;
#endif
default:
- if (ic->nodes == (void *)ic && ic->nlink == 0)
+ if (ic->nodes == (void *)ic && ic->pino_nlink == 0)
jffs2_del_ino_cache(c, ic);
}
}
@@ -332,7 +332,8 @@
if (c->mtd->point) {
unsigned long *wordebuf;
- ret = c->mtd->point(c->mtd, jeb->offset, c->sector_size, &retlen, (unsigned char **)&ebuf);
+ ret = c->mtd->point(c->mtd, jeb->offset, c->sector_size,
+ &retlen, &ebuf, NULL);
if (ret) {
D1(printk(KERN_DEBUG "MTD point failed %d\n", ret));
goto do_flash_read;
@@ -340,7 +341,7 @@
if (retlen < c->sector_size) {
/* Don't muck about if it won't let us point to the whole erase sector */
D1(printk(KERN_DEBUG "MTD point returned len too short: 0x%zx\n", retlen));
- c->mtd->unpoint(c->mtd, ebuf, jeb->offset, retlen);
+ c->mtd->unpoint(c->mtd, jeb->offset, retlen);
goto do_flash_read;
}
wordebuf = ebuf-sizeof(*wordebuf);
@@ -349,7 +350,7 @@
if (*++wordebuf != ~0)
break;
} while(--retlen);
- c->mtd->unpoint(c->mtd, ebuf, jeb->offset, c->sector_size);
+ c->mtd->unpoint(c->mtd, jeb->offset, c->sector_size);
if (retlen) {
printk(KERN_WARNING "Newly-erased block contained word 0x%lx at offset 0x%08tx\n",
*wordebuf, jeb->offset + c->sector_size-retlen*sizeof(*wordebuf));
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index 3eb1c84..086c438 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -273,7 +273,7 @@
inode->i_mtime = ITIME(je32_to_cpu(latest_node.mtime));
inode->i_ctime = ITIME(je32_to_cpu(latest_node.ctime));
- inode->i_nlink = f->inocache->nlink;
+ inode->i_nlink = f->inocache->pino_nlink;
inode->i_blocks = (inode->i_size + 511) >> 9;
@@ -286,13 +286,12 @@
case S_IFDIR:
{
struct jffs2_full_dirent *fd;
+ inode->i_nlink = 2; /* parent and '.' */
for (fd=f->dents; fd; fd = fd->next) {
if (fd->type == DT_DIR && fd->ino)
inc_nlink(inode);
}
- /* and '..' */
- inc_nlink(inode);
/* Root dir gets i_nlink 3 for some reason */
if (inode->i_ino == 1)
inc_nlink(inode);
@@ -586,11 +585,12 @@
}
struct jffs2_inode_info *jffs2_gc_fetch_inode(struct jffs2_sb_info *c,
- int inum, int nlink)
+ int inum, int unlinked)
{
struct inode *inode;
struct jffs2_inode_cache *ic;
- if (!nlink) {
+
+ if (unlinked) {
/* The inode has zero nlink but its nodes weren't yet marked
obsolete. This has to be because we're still waiting for
the final (close() and) iput() to happen.
@@ -638,8 +638,8 @@
return ERR_CAST(inode);
}
if (is_bad_inode(inode)) {
- printk(KERN_NOTICE "Eep. read_inode() failed for ino #%u. nlink %d\n",
- inum, nlink);
+ printk(KERN_NOTICE "Eep. read_inode() failed for ino #%u. unlinked %d\n",
+ inum, unlinked);
/* NB. This will happen again. We need to do something appropriate here. */
iput(inode);
return ERR_PTR(-EIO);
diff --git a/fs/jffs2/gc.c b/fs/jffs2/gc.c
index bad0056..090c556 100644
--- a/fs/jffs2/gc.c
+++ b/fs/jffs2/gc.c
@@ -161,8 +161,8 @@
continue;
}
- if (!ic->nlink) {
- D1(printk(KERN_DEBUG "Skipping check of ino #%d with nlink zero\n",
+ if (!ic->pino_nlink) {
+ D1(printk(KERN_DEBUG "Skipping check of ino #%d with nlink/pino zero\n",
ic->ino));
spin_unlock(&c->inocache_lock);
jffs2_xattr_delete_inode(c, ic);
@@ -398,10 +398,10 @@
it's vaguely possible. */
inum = ic->ino;
- nlink = ic->nlink;
+ nlink = ic->pino_nlink;
spin_unlock(&c->inocache_lock);
- f = jffs2_gc_fetch_inode(c, inum, nlink);
+ f = jffs2_gc_fetch_inode(c, inum, !nlink);
if (IS_ERR(f)) {
ret = PTR_ERR(f);
goto release_sem;
diff --git a/fs/jffs2/nodelist.h b/fs/jffs2/nodelist.h
index 8219df6..17504455 100644
--- a/fs/jffs2/nodelist.h
+++ b/fs/jffs2/nodelist.h
@@ -177,7 +177,10 @@
#ifdef CONFIG_JFFS2_FS_XATTR
struct jffs2_xattr_ref *xref;
#endif
- int nlink;
+ uint32_t pino_nlink; /* Directories store parent inode
+ here; other inodes store nlink.
+ Zero always means that it's
+ completely unlinked. */
};
/* Inode states for 'state' above. We need the 'GC' state to prevent
diff --git a/fs/jffs2/nodemgmt.c b/fs/jffs2/nodemgmt.c
index 9df8f3e..a9bf9603 100644
--- a/fs/jffs2/nodemgmt.c
+++ b/fs/jffs2/nodemgmt.c
@@ -709,7 +709,7 @@
break;
#endif
default:
- if (ic->nodes == (void *)ic && ic->nlink == 0)
+ if (ic->nodes == (void *)ic && ic->pino_nlink == 0)
jffs2_del_ino_cache(c, ic);
break;
}
diff --git a/fs/jffs2/os-linux.h b/fs/jffs2/os-linux.h
index 1b10d25..2cc866c 100644
--- a/fs/jffs2/os-linux.h
+++ b/fs/jffs2/os-linux.h
@@ -187,7 +187,7 @@
void jffs2_gc_release_inode(struct jffs2_sb_info *c,
struct jffs2_inode_info *f);
struct jffs2_inode_info *jffs2_gc_fetch_inode(struct jffs2_sb_info *c,
- int inum, int nlink);
+ int inum, int unlinked);
unsigned char *jffs2_gc_fetch_page(struct jffs2_sb_info *c,
struct jffs2_inode_info *f,
diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c
index 4cb4d76..6ca08ad 100644
--- a/fs/jffs2/readinode.c
+++ b/fs/jffs2/readinode.c
@@ -63,10 +63,11 @@
/* TODO: instead, incapsulate point() stuff to jffs2_flash_read(),
* adding and jffs2_flash_read_end() interface. */
if (c->mtd->point) {
- err = c->mtd->point(c->mtd, ofs, len, &retlen, &buffer);
+ err = c->mtd->point(c->mtd, ofs, len, &retlen,
+ (void **)&buffer, NULL);
if (!err && retlen < len) {
JFFS2_WARNING("MTD point returned len too short: %zu instead of %u.\n", retlen, tn->csize);
- c->mtd->unpoint(c->mtd, buffer, ofs, retlen);
+ c->mtd->unpoint(c->mtd, ofs, retlen);
} else if (err)
JFFS2_WARNING("MTD point failed: error code %d.\n", err);
else
@@ -100,7 +101,7 @@
kfree(buffer);
#ifndef __ECOS
else
- c->mtd->unpoint(c->mtd, buffer, ofs, len);
+ c->mtd->unpoint(c->mtd, ofs, len);
#endif
if (crc != tn->data_crc) {
@@ -136,7 +137,7 @@
kfree(buffer);
#ifndef __ECOS
else
- c->mtd->unpoint(c->mtd, buffer, ofs, len);
+ c->mtd->unpoint(c->mtd, ofs, len);
#endif
return err;
}
@@ -1123,7 +1124,8 @@
size_t retlen;
int ret;
- dbg_readinode("ino #%u nlink is %d\n", f->inocache->ino, f->inocache->nlink);
+ dbg_readinode("ino #%u pino/nlink is %d\n", f->inocache->ino,
+ f->inocache->pino_nlink);
memset(&rii, 0, sizeof(rii));
@@ -1358,7 +1360,7 @@
}
dbg_readinode("creating inocache for root inode\n");
memset(f->inocache, 0, sizeof(struct jffs2_inode_cache));
- f->inocache->ino = f->inocache->nlink = 1;
+ f->inocache->ino = f->inocache->pino_nlink = 1;
f->inocache->nodes = (struct jffs2_raw_node_ref *)f->inocache;
f->inocache->state = INO_STATE_READING;
jffs2_add_ino_cache(c, f->inocache);
@@ -1401,7 +1403,7 @@
jffs2_clear_acl(f);
jffs2_xattr_delete_inode(c, f->inocache);
mutex_lock(&f->sem);
- deleted = f->inocache && !f->inocache->nlink;
+ deleted = f->inocache && !f->inocache->pino_nlink;
if (f->inocache && f->inocache->state != INO_STATE_CHECKING)
jffs2_set_inocache_state(c, f->inocache, INO_STATE_CLEARING);
diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c
index 272872d2..1d437de 100644
--- a/fs/jffs2/scan.c
+++ b/fs/jffs2/scan.c
@@ -97,11 +97,12 @@
size_t pointlen;
if (c->mtd->point) {
- ret = c->mtd->point (c->mtd, 0, c->mtd->size, &pointlen, &flashbuf);
+ ret = c->mtd->point(c->mtd, 0, c->mtd->size, &pointlen,
+ (void **)&flashbuf, NULL);
if (!ret && pointlen < c->mtd->size) {
/* Don't muck about if it won't let us point to the whole flash */
D1(printk(KERN_DEBUG "MTD point returned len too short: 0x%zx\n", pointlen));
- c->mtd->unpoint(c->mtd, flashbuf, 0, pointlen);
+ c->mtd->unpoint(c->mtd, 0, pointlen);
flashbuf = NULL;
}
if (ret)
@@ -267,7 +268,7 @@
kfree(flashbuf);
#ifndef __ECOS
else
- c->mtd->unpoint(c->mtd, flashbuf, 0, c->mtd->size);
+ c->mtd->unpoint(c->mtd, 0, c->mtd->size);
#endif
if (s)
kfree(s);
@@ -940,7 +941,7 @@
ic->nodes = (void *)ic;
jffs2_add_ino_cache(c, ic);
if (ino == 1)
- ic->nlink = 1;
+ ic->pino_nlink = 1;
return ic;
}
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index f3353df..7da69ea 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -31,11 +31,12 @@
static struct inode *jffs2_alloc_inode(struct super_block *sb)
{
- struct jffs2_inode_info *ei;
- ei = (struct jffs2_inode_info *)kmem_cache_alloc(jffs2_inode_cachep, GFP_KERNEL);
- if (!ei)
+ struct jffs2_inode_info *f;
+
+ f = kmem_cache_alloc(jffs2_inode_cachep, GFP_KERNEL);
+ if (!f)
return NULL;
- return &ei->vfs_inode;
+ return &f->vfs_inode;
}
static void jffs2_destroy_inode(struct inode *inode)
@@ -45,10 +46,10 @@
static void jffs2_i_init_once(struct kmem_cache *cachep, void *foo)
{
- struct jffs2_inode_info *ei = (struct jffs2_inode_info *) foo;
+ struct jffs2_inode_info *f = foo;
- mutex_init(&ei->sem);
- inode_init_once(&ei->vfs_inode);
+ mutex_init(&f->sem);
+ inode_init_once(&f->vfs_inode);
}
static int jffs2_sync_fs(struct super_block *sb, int wait)
diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c
index 8de52b6..0e78b0003 100644
--- a/fs/jffs2/wbuf.c
+++ b/fs/jffs2/wbuf.c
@@ -494,7 +494,7 @@
/* If it's an in-core inode, then we have to adjust any
full_dirent or full_dnode structure to point to the
new version instead of the old */
- f = jffs2_gc_fetch_inode(c, ic->ino, ic->nlink);
+ f = jffs2_gc_fetch_inode(c, ic->ino, !ic->pino_nlink);
if (IS_ERR(f)) {
/* Should never happen; it _must_ be present */
JFFS2_ERROR("Failed to iget() ino #%u, err %ld\n",
diff --git a/fs/jffs2/write.c b/fs/jffs2/write.c
index 665fce9..ca29440 100644
--- a/fs/jffs2/write.c
+++ b/fs/jffs2/write.c
@@ -19,7 +19,8 @@
#include "compr.h"
-int jffs2_do_new_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f, uint32_t mode, struct jffs2_raw_inode *ri)
+int jffs2_do_new_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+ uint32_t mode, struct jffs2_raw_inode *ri)
{
struct jffs2_inode_cache *ic;
@@ -31,7 +32,7 @@
memset(ic, 0, sizeof(*ic));
f->inocache = ic;
- f->inocache->nlink = 1;
+ f->inocache->pino_nlink = 1; /* Will be overwritten shortly for directories */
f->inocache->nodes = (struct jffs2_raw_node_ref *)f->inocache;
f->inocache->state = INO_STATE_PRESENT;
@@ -438,10 +439,10 @@
ret = jffs2_reserve_space(c, sizeof(*ri), &alloclen, ALLOC_NORMAL,
JFFS2_SUMMARY_INODE_SIZE);
D1(printk(KERN_DEBUG "jffs2_do_create(): reserved 0x%x bytes\n", alloclen));
- if (ret) {
- mutex_unlock(&f->sem);
+ if (ret)
return ret;
- }
+
+ mutex_lock(&f->sem);
ri->data_crc = cpu_to_je32(0);
ri->node_crc = cpu_to_je32(crc32(0, ri, sizeof(*ri)-8));
@@ -635,9 +636,9 @@
jffs2_mark_node_obsolete(c, fd->raw);
jffs2_free_full_dirent(fd);
}
- }
-
- dead_f->inocache->nlink--;
+ dead_f->inocache->pino_nlink = 0;
+ } else
+ dead_f->inocache->pino_nlink--;
/* NB: Caller must set inode nlink if appropriate */
mutex_unlock(&dead_f->sem);
}
diff --git a/fs/jffs2/xattr.c b/fs/jffs2/xattr.c
index 574cb7532..082e844 100644
--- a/fs/jffs2/xattr.c
+++ b/fs/jffs2/xattr.c
@@ -592,7 +592,7 @@
When an inode with XATTR is removed, those XATTRs must be removed. */
struct jffs2_xattr_ref *ref, *_ref;
- if (!ic || ic->nlink > 0)
+ if (!ic || ic->pino_nlink > 0)
return;
down_write(&c->xattr_sem);
@@ -829,7 +829,7 @@
ref->xd and ref->ic are not valid yet. */
xd = jffs2_find_xattr_datum(c, ref->xid);
ic = jffs2_get_ino_cache(c, ref->ino);
- if (!xd || !ic || !ic->nlink) {
+ if (!xd || !ic || !ic->pino_nlink) {
dbg_xattr("xref(ino=%u, xid=%u, xseqno=%u) is orphan.\n",
ref->ino, ref->xid, ref->xseqno);
ref->xseqno |= XREF_DELETE_MARKER;
diff --git a/fs/locks.c b/fs/locks.c
index 44d9a6a..11dbf08 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -116,6 +116,7 @@
#include <linux/capability.h>
#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/module.h>
@@ -772,7 +773,7 @@
* give it the opportunity to lock the file.
*/
if (found)
- cond_resched();
+ cond_resched_bkl();
find_conflict:
for_each_lock(inode, before) {
@@ -1752,6 +1753,7 @@
struct file_lock *file_lock = locks_alloc_lock();
struct flock flock;
struct inode *inode;
+ struct file *f;
int error;
if (file_lock == NULL)
@@ -1824,7 +1826,15 @@
* Attempt to detect a close/fcntl race and recover by
* releasing the lock that was just acquired.
*/
- if (!error && fcheck(fd) != filp && flock.l_type != F_UNLCK) {
+ /*
+ * we need that spin_lock here - it prevents reordering between
+ * update of inode->i_flock and check for it done in close().
+ * rcu_read_lock() wouldn't do.
+ */
+ spin_lock(¤t->files->file_lock);
+ f = fcheck(fd);
+ spin_unlock(¤t->files->file_lock);
+ if (!error && f != filp && flock.l_type != F_UNLCK) {
flock.l_type = F_UNLCK;
goto again;
}
@@ -1880,6 +1890,7 @@
struct file_lock *file_lock = locks_alloc_lock();
struct flock64 flock;
struct inode *inode;
+ struct file *f;
int error;
if (file_lock == NULL)
@@ -1952,7 +1963,10 @@
* Attempt to detect a close/fcntl race and recover by
* releasing the lock that was just acquired.
*/
- if (!error && fcheck(fd) != filp && flock.l_type != F_UNLCK) {
+ spin_lock(¤t->files->file_lock);
+ f = fcheck(fd);
+ spin_unlock(¤t->files->file_lock);
+ if (!error && f != filp && flock.l_type != F_UNLCK) {
flock.l_type = F_UNLCK;
goto again;
}
diff --git a/fs/ocfs2/cluster/sys.c b/fs/ocfs2/cluster/sys.c
index 98429fd..bc702da 100644
--- a/fs/ocfs2/cluster/sys.c
+++ b/fs/ocfs2/cluster/sys.c
@@ -65,7 +65,7 @@
{
int ret;
- o2cb_kset = kset_create_and_add("o2cb", NULL, NULL);
+ o2cb_kset = kset_create_and_add("o2cb", NULL, fs_kobj);
if (!o2cb_kset)
return -ENOMEM;
diff --git a/fs/ocfs2/dlm/dlmdebug.c b/fs/ocfs2/dlm/dlmdebug.c
index 5f6d8587..1b81dcb 100644
--- a/fs/ocfs2/dlm/dlmdebug.c
+++ b/fs/ocfs2/dlm/dlmdebug.c
@@ -44,7 +44,8 @@
#define MLOG_MASK_PREFIX ML_DLM
#include "cluster/masklog.h"
-int stringify_lockname(const char *lockname, int locklen, char *buf, int len);
+static int stringify_lockname(const char *lockname, int locklen, char *buf,
+ int len);
void dlm_print_one_lock_resource(struct dlm_lock_resource *res)
{
@@ -251,7 +252,8 @@
*
* For more on lockname formats, please refer to dlmglue.c and ocfs2_lockid.h.
*/
-int stringify_lockname(const char *lockname, int locklen, char *buf, int len)
+static int stringify_lockname(const char *lockname, int locklen, char *buf,
+ int len)
{
int out = 0;
__be64 inode_blkno_be;
@@ -368,7 +370,7 @@
kfree(dc);
}
-void dlm_debug_put(struct dlm_debug_ctxt *dc)
+static void dlm_debug_put(struct dlm_debug_ctxt *dc)
{
if (dc)
kref_put(&dc->debug_refcnt, dlm_debug_free);
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 9154c82d3..57e0d30 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1048,6 +1048,10 @@
mlog_entry("(0x%p, '%.*s')\n", dentry,
dentry->d_name.len, dentry->d_name.name);
+ /* ensuring we don't even attempt to truncate a symlink */
+ if (S_ISLNK(inode->i_mode))
+ attr->ia_valid &= ~ATTR_SIZE;
+
if (attr->ia_valid & ATTR_MODE)
mlog(0, "mode change: %d\n", attr->ia_mode);
if (attr->ia_valid & ATTR_UID)
diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index ce0dc14..be774bd 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -260,7 +260,7 @@
bh = osb->local_alloc_bh;
alloc = (struct ocfs2_dinode *) bh->b_data;
- alloc_copy = kmalloc(bh->b_size, GFP_KERNEL);
+ alloc_copy = kmalloc(bh->b_size, GFP_NOFS);
if (!alloc_copy) {
status = -ENOMEM;
goto out_commit;
@@ -931,7 +931,7 @@
* local alloc shutdown won't try to double free main bitmap
* bits. Make a copy so the sync function knows which bits to
* free. */
- alloc_copy = kmalloc(osb->local_alloc_bh->b_size, GFP_KERNEL);
+ alloc_copy = kmalloc(osb->local_alloc_bh->b_size, GFP_NOFS);
if (!alloc_copy) {
status = -ENOMEM;
mlog_errno(status);
diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c
index ac1d74c..bbd1667 100644
--- a/fs/ocfs2/stack_o2cb.c
+++ b/fs/ocfs2/stack_o2cb.c
@@ -385,7 +385,7 @@
return 0;
}
-struct ocfs2_stack_operations o2cb_stack_ops = {
+static struct ocfs2_stack_operations o2cb_stack_ops = {
.connect = o2cb_cluster_connect,
.disconnect = o2cb_cluster_disconnect,
.hangup = o2cb_cluster_hangup,
diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c
index 7428663..b503772 100644
--- a/fs/ocfs2/stack_user.c
+++ b/fs/ocfs2/stack_user.c
@@ -635,7 +635,7 @@
.owner = THIS_MODULE,
};
-struct miscdevice ocfs2_control_device = {
+static struct miscdevice ocfs2_control_device = {
.minor = MISC_DYNAMIC_MINOR,
.name = "ocfs2_control",
.fops = &ocfs2_control_fops,
diff --git a/fs/ocfs2/symlink.c b/fs/ocfs2/symlink.c
index 7134007..ba9dbb51d 100644
--- a/fs/ocfs2/symlink.c
+++ b/fs/ocfs2/symlink.c
@@ -167,9 +167,11 @@
.readlink = page_readlink,
.follow_link = ocfs2_follow_link,
.getattr = ocfs2_getattr,
+ .setattr = ocfs2_setattr,
};
const struct inode_operations ocfs2_fast_symlink_inode_operations = {
.readlink = ocfs2_readlink,
.follow_link = ocfs2_follow_link,
.getattr = ocfs2_getattr,
+ .setattr = ocfs2_setattr,
};
diff --git a/fs/open.c b/fs/open.c
index 7af1f05..a145008 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -7,6 +7,7 @@
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/quotaops.h>
#include <linux/fsnotify.h>
#include <linux/module.h>
diff --git a/fs/pipe.c b/fs/pipe.c
index f73492b6..ec228bc 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -17,6 +17,7 @@
#include <linux/highmem.h>
#include <linux/pagemap.h>
#include <linux/audit.h>
+#include <linux/syscalls.h>
#include <asm/uaccess.h>
#include <asm/ioctls.h>
@@ -1076,6 +1077,26 @@
}
/*
+ * sys_pipe() is the normal C calling standard for creating
+ * a pipe. It's not the way Unix traditionally does this, though.
+ */
+asmlinkage long __weak sys_pipe(int __user *fildes)
+{
+ int fd[2];
+ int error;
+
+ error = do_pipe(fd);
+ if (!error) {
+ if (copy_to_user(fildes, fd, sizeof(fd))) {
+ sys_close(fd[0]);
+ sys_close(fd[1]);
+ error = -EFAULT;
+ }
+ }
+ return error;
+}
+
+/*
* pipefs should _never_ be mounted by userland - too much of security hassle,
* no real gain from having the whole whorehouse mounted. So we don't need
* any operations on the root directory. However, we need a non-trivial
diff --git a/fs/proc/array.c b/fs/proc/array.c
index c135cbd..9e3b8c3 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -73,6 +73,7 @@
#include <linux/signal.h>
#include <linux/highmem.h>
#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/times.h>
#include <linux/cpuset.h>
#include <linux/rcupdate.h>
@@ -297,6 +298,7 @@
render_cap_t(m, "CapInh:\t", &p->cap_inheritable);
render_cap_t(m, "CapPrm:\t", &p->cap_permitted);
render_cap_t(m, "CapEff:\t", &p->cap_effective);
+ render_cap_t(m, "CapBnd:\t", &p->cap_bset);
}
static inline void task_context_switch_counts(struct seq_file *m,
diff --git a/fs/proc/base.c b/fs/proc/base.c
index fcf02f2..808cbdc 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -56,6 +56,7 @@
#include <linux/init.h>
#include <linux/capability.h>
#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/string.h>
#include <linux/seq_file.h>
#include <linux/namei.h>
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index e2b8e76..88717c0 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -5,11 +5,9 @@
#include <linux/highmem.h>
#include <linux/ptrace.h>
#include <linux/pagemap.h>
-#include <linux/ptrace.h>
#include <linux/mempolicy.h>
#include <linux/swap.h>
#include <linux/swapops.h>
-#include <linux/seq_file.h>
#include <asm/elf.h>
#include <asm/uaccess.h>
diff --git a/fs/proc/task_nommu.c b/fs/proc/task_nommu.c
index 4b733f1..4b4f9cc 100644
--- a/fs/proc/task_nommu.c
+++ b/fs/proc/task_nommu.c
@@ -1,6 +1,7 @@
#include <linux/mm.h>
#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/mount.h>
#include <linux/ptrace.h>
#include <linux/seq_file.h>
diff --git a/fs/select.c b/fs/select.c
index 2c29214..8dda969 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -21,6 +21,7 @@
#include <linux/poll.h>
#include <linux/personality.h> /* for STICKY_TIMEOUTS */
#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/fs.h>
#include <linux/rcupdate.h>
@@ -298,7 +299,7 @@
#define MAX_SELECT_SECONDS \
((unsigned long) (MAX_SCHEDULE_TIMEOUT / HZ)-1)
-static int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
+int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
fd_set __user *exp, s64 *timeout)
{
fd_set_bits fds;
diff --git a/fs/signalfd.c b/fs/signalfd.c
index 8ead0db..61972564 100644
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -207,11 +207,8 @@
asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask, size_t sizemask)
{
- int error;
sigset_t sigmask;
struct signalfd_ctx *ctx;
- struct file *file;
- struct inode *inode;
if (sizemask != sizeof(sigset_t) ||
copy_from_user(&sigmask, user_mask, sizeof(sigmask)))
@@ -230,12 +227,11 @@
* When we call this, the initialization must be complete, since
* anon_inode_getfd() will install the fd.
*/
- error = anon_inode_getfd(&ufd, &inode, &file, "[signalfd]",
- &signalfd_fops, ctx);
- if (error)
- goto err_fdalloc;
+ ufd = anon_inode_getfd("[signalfd]", &signalfd_fops, ctx);
+ if (ufd < 0)
+ kfree(ctx);
} else {
- file = fget(ufd);
+ struct file *file = fget(ufd);
if (!file)
return -EBADF;
ctx = file->private_data;
@@ -252,9 +248,4 @@
}
return ufd;
-
-err_fdalloc:
- kfree(ctx);
- return error;
}
-
diff --git a/fs/splice.c b/fs/splice.c
index 633f58e..7815003 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -811,24 +811,19 @@
{
struct address_space *mapping = out->f_mapping;
struct inode *inode = mapping->host;
- int killsuid, killpriv;
+ struct splice_desc sd = {
+ .total_len = len,
+ .flags = flags,
+ .pos = *ppos,
+ .u.file = out,
+ };
ssize_t ret;
- int err = 0;
- killpriv = security_inode_need_killpriv(out->f_path.dentry);
- killsuid = should_remove_suid(out->f_path.dentry);
- if (unlikely(killsuid || killpriv)) {
- mutex_lock(&inode->i_mutex);
- if (killpriv)
- err = security_inode_killpriv(out->f_path.dentry);
- if (!err && killsuid)
- err = __remove_suid(out->f_path.dentry, killsuid);
- mutex_unlock(&inode->i_mutex);
- if (err)
- return err;
- }
-
- ret = splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_file);
+ inode_double_lock(inode, pipe->inode);
+ ret = remove_suid(out->f_path.dentry);
+ if (likely(!ret))
+ ret = __splice_from_pipe(pipe, &sd, pipe_to_file);
+ inode_double_unlock(inode, pipe->inode);
if (ret > 0) {
unsigned long nr_pages;
@@ -840,6 +835,8 @@
* sync it.
*/
if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) {
+ int err;
+
mutex_lock(&inode->i_mutex);
err = generic_osync_inode(inode, mapping,
OSYNC_METADATA|OSYNC_DATA);
@@ -1075,7 +1072,7 @@
ret = splice_direct_to_actor(in, &sd, direct_splice_actor);
if (ret > 0)
- *ppos = sd.pos;
+ *ppos += ret;
return ret;
}
diff --git a/fs/timerfd.c b/fs/timerfd.c
index 5400524..d87d354 100644
--- a/fs/timerfd.c
+++ b/fs/timerfd.c
@@ -181,10 +181,8 @@
asmlinkage long sys_timerfd_create(int clockid, int flags)
{
- int error, ufd;
+ int ufd;
struct timerfd_ctx *ctx;
- struct file *file;
- struct inode *inode;
if (flags)
return -EINVAL;
@@ -200,12 +198,9 @@
ctx->clockid = clockid;
hrtimer_init(&ctx->tmr, clockid, HRTIMER_MODE_ABS);
- error = anon_inode_getfd(&ufd, &inode, &file, "[timerfd]",
- &timerfd_fops, ctx);
- if (error) {
+ ufd = anon_inode_getfd("[timerfd]", &timerfd_fops, ctx);
+ if (ufd < 0)
kfree(ctx);
- return error;
- }
return ufd;
}
diff --git a/fs/udf/namei.c b/fs/udf/namei.c
index 2b34c8c..d3231947 100644
--- a/fs/udf/namei.c
+++ b/fs/udf/namei.c
@@ -32,6 +32,7 @@
#include <linux/buffer_head.h>
#include <linux/sched.h>
#include <linux/crc-itu-t.h>
+#include <linux/exportfs.h>
static inline int udf_match(int len1, const char *name1, int len2,
const char *name2)
@@ -158,6 +159,8 @@
sector_t offset;
struct extent_position epos = {};
struct udf_inode_info *dinfo = UDF_I(dir);
+ int isdotdot = dentry->d_name.len == 2 &&
+ dentry->d_name.name[0] == '.' && dentry->d_name.name[1] == '.';
size = udf_ext0_offset(dir) + dir->i_size;
f_pos = udf_ext0_offset(dir);
@@ -225,6 +228,12 @@
continue;
}
+ if ((cfi->fileCharacteristics & FID_FILE_CHAR_PARENT) &&
+ isdotdot) {
+ brelse(epos.bh);
+ return fi;
+ }
+
if (!lfi)
continue;
@@ -286,9 +295,8 @@
}
}
unlock_kernel();
- d_add(dentry, inode);
- return NULL;
+ return d_splice_alias(inode, dentry);
}
static struct fileIdentDesc *udf_add_entry(struct inode *dir,
@@ -307,7 +315,7 @@
uint16_t liu;
int block;
kernel_lb_addr eloc;
- uint32_t elen;
+ uint32_t elen = 0;
sector_t offset;
struct extent_position epos = {};
struct udf_inode_info *dinfo;
@@ -398,7 +406,8 @@
}
add:
- if (dinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB) {
+ /* Is there any extent whose size we need to round up? */
+ if (dinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB && elen) {
elen = (elen + sb->s_blocksize - 1) & ~(sb->s_blocksize - 1);
if (dinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT)
epos.offset -= sizeof(short_ad);
@@ -1232,6 +1241,134 @@
return retval;
}
+static struct dentry *udf_get_parent(struct dentry *child)
+{
+ struct dentry *parent;
+ struct inode *inode = NULL;
+ struct dentry dotdot;
+ struct fileIdentDesc cfi;
+ struct udf_fileident_bh fibh;
+
+ dotdot.d_name.name = "..";
+ dotdot.d_name.len = 2;
+
+ lock_kernel();
+ if (!udf_find_entry(child->d_inode, &dotdot, &fibh, &cfi))
+ goto out_unlock;
+
+ if (fibh.sbh != fibh.ebh)
+ brelse(fibh.ebh);
+ brelse(fibh.sbh);
+
+ inode = udf_iget(child->d_inode->i_sb,
+ lelb_to_cpu(cfi.icb.extLocation));
+ if (!inode)
+ goto out_unlock;
+ unlock_kernel();
+
+ parent = d_alloc_anon(inode);
+ if (!parent) {
+ iput(inode);
+ parent = ERR_PTR(-ENOMEM);
+ }
+
+ return parent;
+out_unlock:
+ unlock_kernel();
+ return ERR_PTR(-EACCES);
+}
+
+
+static struct dentry *udf_nfs_get_inode(struct super_block *sb, u32 block,
+ u16 partref, __u32 generation)
+{
+ struct inode *inode;
+ struct dentry *result;
+ kernel_lb_addr loc;
+
+ if (block == 0)
+ return ERR_PTR(-ESTALE);
+
+ loc.logicalBlockNum = block;
+ loc.partitionReferenceNum = partref;
+ inode = udf_iget(sb, loc);
+
+ if (inode == NULL)
+ return ERR_PTR(-ENOMEM);
+
+ if (generation && inode->i_generation != generation) {
+ iput(inode);
+ return ERR_PTR(-ESTALE);
+ }
+ result = d_alloc_anon(inode);
+ if (!result) {
+ iput(inode);
+ return ERR_PTR(-ENOMEM);
+ }
+ return result;
+}
+
+static struct dentry *udf_fh_to_dentry(struct super_block *sb,
+ struct fid *fid, int fh_len, int fh_type)
+{
+ if ((fh_len != 3 && fh_len != 5) ||
+ (fh_type != FILEID_UDF_WITH_PARENT &&
+ fh_type != FILEID_UDF_WITHOUT_PARENT))
+ return NULL;
+
+ return udf_nfs_get_inode(sb, fid->udf.block, fid->udf.partref,
+ fid->udf.generation);
+}
+
+static struct dentry *udf_fh_to_parent(struct super_block *sb,
+ struct fid *fid, int fh_len, int fh_type)
+{
+ if (fh_len != 5 || fh_type != FILEID_UDF_WITH_PARENT)
+ return NULL;
+
+ return udf_nfs_get_inode(sb, fid->udf.parent_block,
+ fid->udf.parent_partref,
+ fid->udf.parent_generation);
+}
+static int udf_encode_fh(struct dentry *de, __u32 *fh, int *lenp,
+ int connectable)
+{
+ int len = *lenp;
+ struct inode *inode = de->d_inode;
+ kernel_lb_addr location = UDF_I(inode)->i_location;
+ struct fid *fid = (struct fid *)fh;
+ int type = FILEID_UDF_WITHOUT_PARENT;
+
+ if (len < 3 || (connectable && len < 5))
+ return 255;
+
+ *lenp = 3;
+ fid->udf.block = location.logicalBlockNum;
+ fid->udf.partref = location.partitionReferenceNum;
+ fid->udf.generation = inode->i_generation;
+
+ if (connectable && !S_ISDIR(inode->i_mode)) {
+ spin_lock(&de->d_lock);
+ inode = de->d_parent->d_inode;
+ location = UDF_I(inode)->i_location;
+ fid->udf.parent_block = location.logicalBlockNum;
+ fid->udf.parent_partref = location.partitionReferenceNum;
+ fid->udf.parent_generation = inode->i_generation;
+ spin_unlock(&de->d_lock);
+ *lenp = 5;
+ type = FILEID_UDF_WITH_PARENT;
+ }
+
+ return type;
+}
+
+const struct export_operations udf_export_ops = {
+ .encode_fh = udf_encode_fh,
+ .fh_to_dentry = udf_fh_to_dentry,
+ .fh_to_parent = udf_fh_to_parent,
+ .get_parent = udf_get_parent,
+};
+
const struct inode_operations udf_dir_inode_operations = {
.lookup = udf_lookup,
.create = udf_create,
diff --git a/fs/udf/partition.c b/fs/udf/partition.c
index 63610f0..96dfd20 100644
--- a/fs/udf/partition.c
+++ b/fs/udf/partition.c
@@ -27,8 +27,8 @@
#include <linux/slab.h>
#include <linux/buffer_head.h>
-inline uint32_t udf_get_pblock(struct super_block *sb, uint32_t block,
- uint16_t partition, uint32_t offset)
+uint32_t udf_get_pblock(struct super_block *sb, uint32_t block,
+ uint16_t partition, uint32_t offset)
{
struct udf_sb_info *sbi = UDF_SB(sb);
struct udf_part_map *map;
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 9fb18a34..7a5f69b 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -1933,6 +1933,7 @@
/* Fill in the rest of the superblock */
sb->s_op = &udf_sb_ops;
+ sb->s_export_op = &udf_export_ops;
sb->dq_op = NULL;
sb->s_dirt = 0;
sb->s_magic = UDF_SUPER_MAGIC;
diff --git a/fs/udf/udfdecl.h b/fs/udf/udfdecl.h
index f3f45d0..8fa9c2d 100644
--- a/fs/udf/udfdecl.h
+++ b/fs/udf/udfdecl.h
@@ -73,6 +73,7 @@
struct buffer_head;
struct super_block;
+extern const struct export_operations udf_export_ops;
extern const struct inode_operations udf_dir_inode_operations;
extern const struct file_operations udf_dir_operations;
extern const struct inode_operations udf_file_inode_operations;
diff --git a/fs/ufs/ufs.h b/fs/ufs/ufs.h
index 244a1aa..11c0351 100644
--- a/fs/ufs/ufs.h
+++ b/fs/ufs/ufs.h
@@ -107,7 +107,6 @@
/* inode.c */
extern struct inode *ufs_iget(struct super_block *, unsigned long);
-extern void ufs_put_inode (struct inode *);
extern int ufs_write_inode (struct inode *, int);
extern int ufs_sync_inode (struct inode *);
extern void ufs_delete_inode (struct inode *);
diff --git a/fs/utimes.c b/fs/utimes.c
index a2bef77..af059d5 100644
--- a/fs/utimes.c
+++ b/fs/utimes.c
@@ -40,9 +40,14 @@
#endif
+static bool nsec_special(long nsec)
+{
+ return nsec == UTIME_OMIT || nsec == UTIME_NOW;
+}
+
static bool nsec_valid(long nsec)
{
- if (nsec == UTIME_OMIT || nsec == UTIME_NOW)
+ if (nsec_special(nsec))
return true;
return nsec >= 0 && nsec <= 999999999;
@@ -119,7 +124,15 @@
newattrs.ia_mtime.tv_nsec = times[1].tv_nsec;
newattrs.ia_valid |= ATTR_MTIME_SET;
}
- } else {
+ }
+
+ /*
+ * If times is NULL or both times are either UTIME_OMIT or
+ * UTIME_NOW, then need to check permissions, because
+ * inode_change_ok() won't do it.
+ */
+ if (!times || (nsec_special(times[0].tv_nsec) &&
+ nsec_special(times[1].tv_nsec))) {
error = -EACCES;
if (IS_IMMUTABLE(inode))
goto mnt_drop_write_and_out;
diff --git a/include/asm-alpha/barrier.h b/include/asm-alpha/barrier.h
index 384dc08d..ac78eba 100644
--- a/include/asm-alpha/barrier.h
+++ b/include/asm-alpha/barrier.h
@@ -24,7 +24,7 @@
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define smp_wmb() barrier()
-#define smp_read_barrier_depends() barrier()
+#define smp_read_barrier_depends() do { } while (0)
#endif
#define set_mb(var, value) \
diff --git a/include/asm-alpha/pgtable.h b/include/asm-alpha/pgtable.h
index 05ce5fb..3f0c59f6 100644
--- a/include/asm-alpha/pgtable.h
+++ b/include/asm-alpha/pgtable.h
@@ -287,17 +287,34 @@
#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
+/*
+ * The smp_read_barrier_depends() in the following functions are required to
+ * order the load of *dir (the pointer in the top level page table) with any
+ * subsequent load of the returned pmd_t *ret (ret is data dependent on *dir).
+ *
+ * If this ordering is not enforced, the CPU might load an older value of
+ * *ret, which may be uninitialized data. See mm/memory.c:__pte_alloc for
+ * more details.
+ *
+ * Note that we never change the mm->pgd pointer after the task is running, so
+ * pgd_offset does not require such a barrier.
+ */
+
/* Find an entry in the second-level page table.. */
extern inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
{
- return (pmd_t *) pgd_page_vaddr(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PAGE - 1));
+ pmd_t *ret = (pmd_t *) pgd_page_vaddr(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PAGE - 1));
+ smp_read_barrier_depends(); /* see above */
+ return ret;
}
/* Find an entry in the third-level page table.. */
extern inline pte_t * pte_offset_kernel(pmd_t * dir, unsigned long address)
{
- return (pte_t *) pmd_page_vaddr(*dir)
+ pte_t *ret = (pte_t *) pmd_page_vaddr(*dir)
+ ((address >> PAGE_SHIFT) & (PTRS_PER_PAGE - 1));
+ smp_read_barrier_depends(); /* see above */
+ return ret;
}
#define pte_offset_map(dir,addr) pte_offset_kernel((dir),(addr))
diff --git a/include/asm-alpha/types.h b/include/asm-alpha/types.h
index f571613..c154135 100644
--- a/include/asm-alpha/types.h
+++ b/include/asm-alpha/types.h
@@ -8,28 +8,12 @@
* not a major issue. However, for interoperability, libraries still
* need to be careful to avoid a name clashes.
*/
+#include <asm-generic/int-l64.h>
#ifndef __ASSEMBLY__
typedef unsigned int umode_t;
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-typedef __signed__ long __s64;
-typedef unsigned long __u64;
-
#endif /* __ASSEMBLY__ */
/*
@@ -41,18 +25,6 @@
#ifndef __ASSEMBLY__
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long s64;
-typedef unsigned long u64;
-
typedef u64 dma_addr_t;
typedef u64 dma64_addr_t;
diff --git a/include/asm-arm/arch-pxa/pm.h b/include/asm-arm/arch-pxa/pm.h
index 9d9f4b5..261e5bc 100644
--- a/include/asm-arm/arch-pxa/pm.h
+++ b/include/asm-arm/arch-pxa/pm.h
@@ -10,7 +10,7 @@
#include <linux/suspend.h>
struct pxa_cpu_pm_fns {
- int save_size;
+ int save_count;
void (*save)(unsigned long *);
void (*restore)(unsigned long *);
int (*valid)(suspend_state_t state);
diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h
index a758a71..9aa6c2e 100644
--- a/include/asm-arm/arch-pxa/system.h
+++ b/include/asm-arm/arch-pxa/system.h
@@ -22,7 +22,8 @@
static inline void arch_reset(char mode)
{
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+ if (cpu_is_pxa2xx())
+ RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
if (mode == 's') {
/* Jump into ROM at address 0 */
diff --git a/include/asm-arm/div64.h b/include/asm-arm/div64.h
index 0b5f881..5001390 100644
--- a/include/asm-arm/div64.h
+++ b/include/asm-arm/div64.h
@@ -224,6 +224,4 @@
#endif
-extern uint64_t div64_64(uint64_t dividend, uint64_t divisor);
-
#endif
diff --git a/include/asm-arm/types.h b/include/asm-arm/types.h
index 3141451..345df01 100644
--- a/include/asm-arm/types.h
+++ b/include/asm-arm/types.h
@@ -1,29 +1,12 @@
#ifndef __ASM_ARM_TYPES_H
#define __ASM_ARM_TYPES_H
+#include <asm-generic/int-ll64.h>
+
#ifndef __ASSEMBLY__
typedef unsigned short umode_t;
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
#endif /* __ASSEMBLY__ */
/*
@@ -35,18 +18,6 @@
#ifndef __ASSEMBLY__
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
/* Dma addresses are 32-bits wide. */
typedef u32 dma_addr_t;
diff --git a/include/asm-avr32/types.h b/include/asm-avr32/types.h
index 8999a38..9cefda6 100644
--- a/include/asm-avr32/types.h
+++ b/include/asm-avr32/types.h
@@ -8,28 +8,12 @@
#ifndef __ASM_AVR32_TYPES_H
#define __ASM_AVR32_TYPES_H
+#include <asm-generic/int-ll64.h>
+
#ifndef __ASSEMBLY__
typedef unsigned short umode_t;
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
#endif /* __ASSEMBLY__ */
/*
@@ -41,18 +25,6 @@
#ifndef __ASSEMBLY__
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
/* Dma addresses are 32-bits wide. */
typedef u32 dma_addr_t;
diff --git a/include/asm-blackfin/dpmc.h b/include/asm-blackfin/dpmc.h
index 686cf83..7f34cd3 100644
--- a/include/asm-blackfin/dpmc.h
+++ b/include/asm-blackfin/dpmc.h
@@ -1,7 +1,7 @@
/*
* include/asm-blackfin/dpmc.h - Miscellaneous IOCTL commands for Dynamic Power
* Management Controller Driver.
- * Copyright (C) 2004 Analog Device Inc.
+ * Copyright (C) 2004-2008 Analog Device Inc.
*
*/
#ifndef _BLACKFIN_DPMC_H_
@@ -65,6 +65,14 @@
extern unsigned long get_cclk(void);
extern unsigned long get_sclk(void);
+struct bfin_dpmc_platform_data {
+ const unsigned int *tuple_tab;
+ unsigned short tabsize;
+ unsigned short vr_settling_time; /* in us */
+};
+
+#define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16))
+
#endif /* __KERNEL__ */
#endif /*_BLACKFIN_DPMC_H_*/
diff --git a/include/asm-blackfin/entry.h b/include/asm-blackfin/entry.h
index 562c6d3a..c4f721e 100644
--- a/include/asm-blackfin/entry.h
+++ b/include/asm-blackfin/entry.h
@@ -17,6 +17,11 @@
#define PF_DTRACE_OFF 1
#define PF_DTRACE_BIT 5
+/*
+ * NOTE! The single-stepping code assumes that all interrupt handlers
+ * start by saving SYSCFG on the stack with their first instruction.
+ */
+
/* This one is used for exceptions, emulation, and NMI. It doesn't push
RETI and doesn't do cli. */
#define SAVE_ALL_SYS save_context_no_interrupts
diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
index f0ab273..26e3c80 100644
--- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
@@ -44,10 +44,15 @@
#define UART_PUT_CHAR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_THR), v)
#define UART_PUT_DLL(uart, v) bfin_write16(((uart)->port.membase + OFFSET_DLL), v)
#define UART_PUT_IER(uart, v) bfin_write16(((uart)->port.membase + OFFSET_IER), v)
+#define UART_SET_IER(uart, v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
+#define UART_CLEAR_IER(uart, v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
#define UART_PUT_DLH(uart, v) bfin_write16(((uart)->port.membase + OFFSET_DLH), v)
#define UART_PUT_LCR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_LCR), v)
#define UART_PUT_GCTL(uart, v) bfin_write16(((uart)->port.membase + OFFSET_GCTL), v)
+#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
+#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
index fbe88de..d016603 100644
--- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
@@ -44,10 +44,15 @@
#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v)
#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v)
+#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
+#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
+#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
+#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+
#ifdef CONFIG_BFIN_UART0_CTSRTS
# define CONFIG_SERIAL_BFIN_CTSRTS
# ifndef CONFIG_UART0_CTS_PIN
diff --git a/include/asm-blackfin/mach-bf533/defBF532.h b/include/asm-blackfin/mach-bf533/defBF532.h
index 17e1548..0ab4dd7 100644
--- a/include/asm-blackfin/mach-bf533/defBF532.h
+++ b/include/asm-blackfin/mach-bf533/defBF532.h
@@ -468,6 +468,8 @@
#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */
diff --git a/include/asm-blackfin/mach-bf533/irq.h b/include/asm-blackfin/mach-bf533/irq.h
index 832e6f6..5aa38e5 100644
--- a/include/asm-blackfin/mach-bf533/irq.h
+++ b/include/asm-blackfin/mach-bf533/irq.h
@@ -66,12 +66,13 @@
DMA8/9 Interrupt IVG13 28
DMA10/11 Interrupt IVG13 29
Watchdog Timer IVG13 30
- Software Interrupt 1 IVG14 31
- Software Interrupt 2 --
+
+ Softirq IVG14 31
+ System Call --
(lowest priority) IVG15 32 *
*/
-#define SYS_IRQS 32
-#define NR_PERI_INTS 24
+#define SYS_IRQS 31
+#define NR_PERI_INTS 24
/* The ABSTRACT IRQ definitions */
/** the first seven of the following are fixed, the rest you change if you need to **/
@@ -96,7 +97,7 @@
#define IRQ_SPORT0_TX 17 /*DMA2 Interrupt (SPORT0 TX) */
#define IRQ_SPORT1_RX 18 /*DMA3 Interrupt (SPORT1 RX) */
#define IRQ_SPORT1_TX 19 /*DMA4 Interrupt (SPORT1 TX) */
-#define IRQ_SPI 20 /*DMA5 Interrupt (SPI) */
+#define IRQ_SPI 20 /*DMA5 Interrupt (SPI) */
#define IRQ_UART_RX 21 /*DMA6 Interrupt (UART RX) */
#define IRQ_UART_TX 22 /*DMA7 Interrupt (UART TX) */
#define IRQ_TMR0 23 /*Timer 0 */
@@ -108,9 +109,6 @@
#define IRQ_MEM_DMA1 29 /*DMA10/11 Interrupt (Memory DMA Stream 1) */
#define IRQ_WATCH 30 /*Watch Dog Timer */
-#define IRQ_SW_INT1 31 /*Software Int 1 */
-#define IRQ_SW_INT2 32 /*Software Int 2 (reserved for SYSCALL) */
-
#define IRQ_PF0 33
#define IRQ_PF1 34
#define IRQ_PF2 35
diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
index fd100a4..f79d1a0 100644
--- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
@@ -44,10 +44,15 @@
#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v)
#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v)
+#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
+#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
+#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
+#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
diff --git a/include/asm-blackfin/mach-bf537/irq.h b/include/asm-blackfin/mach-bf537/irq.h
index be6f2ff..2e68a8a 100644
--- a/include/asm-blackfin/mach-bf537/irq.h
+++ b/include/asm-blackfin/mach-bf537/irq.h
@@ -34,24 +34,23 @@
/*
* Interrupt source definitions
- Event Source Core Event Name
-Core Emulation **
- Events (highest priority) EMU 0
- Reset RST 1
- NMI NMI 2
- Exception EVX 3
- Reserved -- 4
- Hardware Error IVHW 5
- Core Timer IVTMR 6 *
-
-.....
-
- Software Interrupt 1 IVG14 31
- Software Interrupt 2 --
- (lowest priority) IVG15 32 *
+ * Event Source Core Event Name
+ * Core Emulation **
+ * Events (highest priority) EMU 0
+ * Reset RST 1
+ * NMI NMI 2
+ * Exception EVX 3
+ * Reserved -- 4
+ * Hardware Error IVHW 5
+ * Core Timer IVTMR 6
+ * .....
+ *
+ * Softirq IVG14
+ * System Call --
+ * (lowest priority) IVG15
*/
-#define SYS_IRQS 41
+#define SYS_IRQS 39
#define NR_PERI_INTS 32
/* The ABSTRACT IRQ definitions */
@@ -95,10 +94,8 @@
#define IRQ_PORTG_INTB 35 /* PF Port G (PF15:0) Interrupt B */
#define IRQ_MEM_DMA0 36 /*(Memory DMA Stream 0) */
#define IRQ_MEM_DMA1 37 /*(Memory DMA Stream 1) */
-#define IRQ_PROG_INTB 38 /* PF Ports F (PF15:0) Interrupt B */
+#define IRQ_PROG_INTB 38 /* PF Ports F (PF15:0) Interrupt B */
#define IRQ_WATCH 38 /*Watch Dog Timer */
-#define IRQ_SW_INT1 40 /*Software Int 1 */
-#define IRQ_SW_INT2 41 /*Software Int 2 (reserved for SYSCALL) */
#define IRQ_PPI_ERROR 42 /*PPI Error Interrupt */
#define IRQ_CAN_ERROR 43 /*CAN Error Interrupt */
diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
index 6547027..5eb46a7 100644
--- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
@@ -54,6 +54,9 @@
#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
#define UART_PUT_MCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_MCR),v)
+#define UART_SET_DLAB(uart) /* MMRs not muxed on BF54x */
+#define UART_CLEAR_DLAB(uart) /* MMRs not muxed on BF54x */
+
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/include/asm-blackfin/mach-bf548/defBF54x_base.h
index 08f90c2..e022e89 100644
--- a/include/asm-blackfin/mach-bf548/defBF54x_base.h
+++ b/include/asm-blackfin/mach-bf548/defBF54x_base.h
@@ -2329,6 +2329,26 @@
#define KPADWE 0x1000 /* Keypad Wake-Up Enable */
#define ROTWE 0x2000 /* Rotary Wake-Up Enable */
+#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */
+#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */
+#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */
+
+#define GAIN_5 0x0000 /* GAIN = 5*/
+#define GAIN_10 0x0004 /* GAIN = 1*/
+#define GAIN_20 0x0008 /* GAIN = 2*/
+#define GAIN_50 0x000C /* GAIN = 5*/
+
+#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
+
/* Bit masks for NFC_CTL */
#define WR_DLY 0xf /* Write Strobe Delay */
diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
index 8a4e66d..7a96287 100644
--- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
@@ -44,10 +44,15 @@
#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v)
#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v)
+#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
+#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
+#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
+#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+
#ifdef CONFIG_BFIN_UART0_CTSRTS
# define CONFIG_SERIAL_BFIN_CTSRTS
# ifndef CONFIG_UART0_CTS_PIN
diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/include/asm-blackfin/mach-bf561/defBF561.h
index 366c9b9..1ab50e9 100644
--- a/include/asm-blackfin/mach-bf561/defBF561.h
+++ b/include/asm-blackfin/mach-bf561/defBF561.h
@@ -868,6 +868,34 @@
#define CHIPID_FAMILY 0x0FFFF000
#define CHIPID_MANUFACTURE 0x00000FFE
+/* VR_CTL Masks */
+#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */
+#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
+#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */
+#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */
+#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */
+
+#define GAIN 0x000C /* Voltage Level Gain */
+#define GAIN_5 0x0000 /* GAIN = 5*/
+#define GAIN_10 0x0004 /* GAIN = 1*/
+#define GAIN_20 0x0008 /* GAIN = 2*/
+#define GAIN_50 0x000C /* GAIN = 5*/
+
+#define VLEV 0x00F0 /* Internal Voltage Level */
+#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
+
+#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
+#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */
+
/* PLL_DIV Masks */
#define SCLK_DIV(x) (x) /* SCLK = VCO / x */
diff --git a/include/asm-blackfin/mach-bf561/irq.h b/include/asm-blackfin/mach-bf561/irq.h
index 83f0383..6698389 100644
--- a/include/asm-blackfin/mach-bf561/irq.h
+++ b/include/asm-blackfin/mach-bf561/irq.h
@@ -118,12 +118,13 @@
Supplemental interrupt 0 IVG7 69
supplemental interrupt 1 IVG7 70
- Software Interrupt 1 IVG14 71
- Software Interrupt 2 IVG15 72 *
- (lowest priority)
+ Softirq IVG14
+ System Call --
+ (lowest priority) IVG15
+
**********************************************************************/
-#define SYS_IRQS 72
+#define SYS_IRQS 71
#define NR_PERI_INTS 64
/*
@@ -237,9 +238,7 @@
#define IRQ_RESERVED_2 (IVG_BASE + 61) /* Reserved interrupt */
#define IRQ_SUPPLE_0 (IVG_BASE + 62) /* Supplemental interrupt 0 */
#define IRQ_SUPPLE_1 (IVG_BASE + 63) /* supplemental interrupt 1 */
-#define IRQ_SW_INT1 71 /* Software Interrupt 1 */
-#define IRQ_SW_INT2 72 /* Software Interrupt 2 */
- /* reserved for SYSCALL */
+
#define IRQ_PF0 73
#define IRQ_PF1 74
#define IRQ_PF2 75
diff --git a/include/asm-blackfin/mach-common/context.S b/include/asm-blackfin/mach-common/context.S
index fd0ebe1..c0e630e 100644
--- a/include/asm-blackfin/mach-common/context.S
+++ b/include/asm-blackfin/mach-common/context.S
@@ -28,6 +28,11 @@
*/
/*
+ * NOTE! The single-stepping code assumes that all interrupt handlers
+ * start by saving SYSCFG on the stack with their first instruction.
+ */
+
+/*
* Code to save processor context.
* We even save the register which are preserved by a function call
* - r4, r5, r6, r7, p3, p4, p5
diff --git a/include/asm-blackfin/time.h b/include/asm-blackfin/time.h
index 6e5859b..ddc43ce 100644
--- a/include/asm-blackfin/time.h
+++ b/include/asm-blackfin/time.h
@@ -24,6 +24,8 @@
#ifndef CONFIG_CPU_FREQ
#define TIME_SCALE 1
+#define __bfin_cycles_off (0)
+#define __bfin_cycles_mod (0)
#else
/*
* Blackfin CPU frequency scaling supports max Core Clock 1, 1/2 and 1/4 .
@@ -31,6 +33,8 @@
* adjust the Core Timer Presale Register. This way we don't lose time.
*/
#define TIME_SCALE 4
+extern unsigned long long __bfin_cycles_off;
+extern unsigned int __bfin_cycles_mod;
#endif
#endif
diff --git a/include/asm-blackfin/types.h b/include/asm-blackfin/types.h
index 9785a6d..8441cbc 100644
--- a/include/asm-blackfin/types.h
+++ b/include/asm-blackfin/types.h
@@ -8,30 +8,12 @@
* not a major issue. However, for interoperability, libraries still
* need to be careful to avoid a name clashes.
*/
+#include <asm-generic/int-ll64.h>
+
#ifndef __ASSEMBLY__
typedef unsigned short umode_t;
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-/* HK0617 -- Changes to unsigned long temporarily */
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
#endif /* __ASSEMBLY__ */
/*
* These aren't exported outside the kernel to avoid name space clashes
@@ -42,18 +24,6 @@
#ifndef __ASSEMBLY__
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
/* Dma addresses are 32-bits wide. */
typedef u32 dma_addr_t;
diff --git a/include/asm-cris/types.h b/include/asm-cris/types.h
index 5a21c42..5790262c 100644
--- a/include/asm-cris/types.h
+++ b/include/asm-cris/types.h
@@ -1,29 +1,12 @@
#ifndef _ETRAX_TYPES_H
#define _ETRAX_TYPES_H
+#include <asm-generic/int-ll64.h>
+
#ifndef __ASSEMBLY__
typedef unsigned short umode_t;
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
#endif /* __ASSEMBLY__ */
/*
@@ -35,18 +18,6 @@
#ifndef __ASSEMBLY__
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
/* Dma addresses are 32-bits wide, just like our other addresses. */
typedef u32 dma_addr_t;
diff --git a/include/asm-frv/system.h b/include/asm-frv/system.h
index cb307f8..d3a12a9 100644
--- a/include/asm-frv/system.h
+++ b/include/asm-frv/system.h
@@ -179,7 +179,7 @@
#define mb() asm volatile ("membar" : : :"memory")
#define rmb() asm volatile ("membar" : : :"memory")
#define wmb() asm volatile ("membar" : : :"memory")
-#define read_barrier_depends() barrier()
+#define read_barrier_depends() do { } while (0)
#ifdef CONFIG_SMP
#define smp_mb() mb()
diff --git a/include/asm-frv/types.h b/include/asm-frv/types.h
index 767e5ed..613bf1e 100644
--- a/include/asm-frv/types.h
+++ b/include/asm-frv/types.h
@@ -12,29 +12,12 @@
#ifndef _ASM_TYPES_H
#define _ASM_TYPES_H
+#include <asm-generic/int-ll64.h>
+
#ifndef __ASSEMBLY__
typedef unsigned short umode_t;
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
#endif /* __ASSEMBLY__ */
/*
@@ -46,19 +29,6 @@
#ifndef __ASSEMBLY__
-
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
/* Dma addresses are 32-bits wide. */
typedef u32 dma_addr_t;
diff --git a/include/asm-frv/unaligned.h b/include/asm-frv/unaligned.h
index 64ccc73..839a2fb 100644
--- a/include/asm-frv/unaligned.h
+++ b/include/asm-frv/unaligned.h
@@ -9,8 +9,8 @@
* 2 of the License, or (at your option) any later version.
*/
-#ifndef _ASM_FRV_UNALIGNED_H
-#define _ASM_FRV_UNALIGNED_H
+#ifndef _ASM_UNALIGNED_H
+#define _ASM_UNALIGNED_H
#include <linux/unaligned/le_byteshift.h>
#include <linux/unaligned/be_byteshift.h>
@@ -19,4 +19,4 @@
#define get_unaligned __get_unaligned_be
#define put_unaligned __put_unaligned_be
-#endif /* _ASM_FRV_UNALIGNED_H */
+#endif /* _ASM_UNALIGNED_H */
diff --git a/include/asm-generic/Kbuild b/include/asm-generic/Kbuild
index c18110e..4c9932a 100644
--- a/include/asm-generic/Kbuild
+++ b/include/asm-generic/Kbuild
@@ -7,5 +7,7 @@
header-y += signal.h
header-y += statfs.h
+unifdef-y += int-l64.h
+unifdef-y += int-ll64.h
unifdef-y += resource.h
unifdef-y += siginfo.h
diff --git a/include/asm-generic/div64.h b/include/asm-generic/div64.h
index a4a4937..8f4e319 100644
--- a/include/asm-generic/div64.h
+++ b/include/asm-generic/div64.h
@@ -30,11 +30,6 @@
__rem; \
})
-static inline uint64_t div64_64(uint64_t dividend, uint64_t divisor)
-{
- return dividend / divisor;
-}
-
#elif BITS_PER_LONG == 32
extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor);
@@ -54,8 +49,6 @@
__rem; \
})
-extern uint64_t div64_64(uint64_t dividend, uint64_t divisor);
-
#else /* BITS_PER_LONG == ?? */
# error do_div() does not yet support the C64
diff --git a/include/asm-generic/int-l64.h b/include/asm-generic/int-l64.h
new file mode 100644
index 0000000..2af9b75
--- /dev/null
+++ b/include/asm-generic/int-l64.h
@@ -0,0 +1,71 @@
+/*
+ * asm-generic/int-l64.h
+ *
+ * Integer declarations for architectures which use "long"
+ * for 64-bit types.
+ */
+
+#ifndef _ASM_GENERIC_INT_L64_H
+#define _ASM_GENERIC_INT_L64_H
+
+#ifndef __ASSEMBLY__
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+typedef __signed__ long __s64;
+typedef unsigned long __u64;
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long s64;
+typedef unsigned long u64;
+
+#define S8_C(x) x
+#define U8_C(x) x ## U
+#define S16_C(x) x
+#define U16_C(x) x ## U
+#define S32_C(x) x
+#define U32_C(x) x ## U
+#define S64_C(x) x ## L
+#define U64_C(x) x ## UL
+
+#else /* __ASSEMBLY__ */
+
+#define S8_C(x) x
+#define U8_C(x) x
+#define S16_C(x) x
+#define U16_C(x) x
+#define S32_C(x) x
+#define U32_C(x) x
+#define S64_C(x) x
+#define U64_C(x) x
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_GENERIC_INT_L64_H */
diff --git a/include/asm-generic/int-ll64.h b/include/asm-generic/int-ll64.h
new file mode 100644
index 0000000..2609489
--- /dev/null
+++ b/include/asm-generic/int-ll64.h
@@ -0,0 +1,76 @@
+/*
+ * asm-generic/int-ll64.h
+ *
+ * Integer declarations for architectures which use "long long"
+ * for 64-bit types.
+ */
+
+#ifndef _ASM_GENERIC_INT_LL64_H
+#define _ASM_GENERIC_INT_LL64_H
+
+#ifndef __ASSEMBLY__
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#ifdef __GNUC__
+__extension__ typedef __signed__ long long __s64;
+__extension__ typedef unsigned long long __u64;
+#elif defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+#define S8_C(x) x
+#define U8_C(x) x ## U
+#define S16_C(x) x
+#define U16_C(x) x ## U
+#define S32_C(x) x
+#define U32_C(x) x ## U
+#define S64_C(x) x ## LL
+#define U64_C(x) x ## ULL
+
+#else /* __ASSEMBLY__ */
+
+#define S8_C(x) x
+#define U8_C(x) x
+#define S16_C(x) x
+#define U16_C(x) x
+#define S32_C(x) x
+#define U32_C(x) x
+#define S64_C(x) x
+#define U64_C(x) x
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_GENERIC_INT_LL64_H */
diff --git a/include/asm-h8300/types.h b/include/asm-h8300/types.h
index 56566e2..1287519 100644
--- a/include/asm-h8300/types.h
+++ b/include/asm-h8300/types.h
@@ -1,6 +1,8 @@
#ifndef _H8300_TYPES_H
#define _H8300_TYPES_H
+#include <asm-generic/int-ll64.h>
+
#if !defined(__ASSEMBLY__)
/*
@@ -14,41 +16,10 @@
typedef unsigned short umode_t;
/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
-/*
* These aren't exported outside the kernel to avoid name space clashes
*/
#ifdef __KERNEL__
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
#define BITS_PER_LONG 32
/* Dma addresses are 32-bits wide. */
diff --git a/include/asm-ia64/cpu.h b/include/asm-ia64/cpu.h
index e87fa321..fcca30b 100644
--- a/include/asm-ia64/cpu.h
+++ b/include/asm-ia64/cpu.h
@@ -14,8 +14,8 @@
DECLARE_PER_CPU(int, cpu_state);
-extern int arch_register_cpu(int num);
#ifdef CONFIG_HOTPLUG_CPU
+extern int arch_register_cpu(int num);
extern void arch_unregister_cpu(int);
#endif
diff --git a/include/asm-ia64/dmi.h b/include/asm-ia64/dmi.h
index f3efaa2..00eb1b1 100644
--- a/include/asm-ia64/dmi.h
+++ b/include/asm-ia64/dmi.h
@@ -3,4 +3,9 @@
#include <asm/io.h>
+/* Use normal IO mappings for DMI */
+#define dmi_ioremap ioremap
+#define dmi_iounmap(x,l) iounmap(x)
+#define dmi_alloc(l) kmalloc(l, GFP_ATOMIC)
+
#endif
diff --git a/include/asm-ia64/io.h b/include/asm-ia64/io.h
index 4ebed77..260a85a 100644
--- a/include/asm-ia64/io.h
+++ b/include/asm-ia64/io.h
@@ -423,11 +423,6 @@
extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size);
extern void iounmap (volatile void __iomem *addr);
-/* Use normal IO mappings for DMI */
-#define dmi_ioremap ioremap
-#define dmi_iounmap(x,l) iounmap(x)
-#define dmi_alloc(l) kmalloc(l, GFP_ATOMIC)
-
/*
* String version of IO memory access ops:
*/
diff --git a/include/asm-ia64/thread_info.h b/include/asm-ia64/thread_info.h
index f30e055..2422ac61 100644
--- a/include/asm-ia64/thread_info.h
+++ b/include/asm-ia64/thread_info.h
@@ -108,13 +108,11 @@
#define TIF_DB_DISABLED 19 /* debug trap disabled for fsyscall */
#define TIF_FREEZE 20 /* is freezing for suspend */
#define TIF_RESTORE_RSE 21 /* user RBS is newer than kernel RBS */
-#define TIF_RESTORE_SIGMASK 22 /* restore signal mask in do_signal() */
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
#define _TIF_SYSCALL_TRACEAUDIT (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP)
-#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
@@ -131,7 +129,18 @@
#define TIF_WORK_MASK (TIF_ALLWORK_MASK&~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT))
#define TS_POLLING 1 /* true if in idle loop and not sleeping */
+#define TS_RESTORE_SIGMASK 2 /* restore signal mask in do_signal() */
#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK 1
+static inline void set_restore_sigmask(void)
+{
+ struct thread_info *ti = current_thread_info();
+ ti->status |= TS_RESTORE_SIGMASK;
+ set_bit(TIF_SIGPENDING, &ti->flags);
+}
+#endif /* !__ASSEMBLY__ */
+
#endif /* _ASM_IA64_THREAD_INFO_H */
diff --git a/include/asm-ia64/types.h b/include/asm-ia64/types.h
index 902850d..e36b371 100644
--- a/include/asm-ia64/types.h
+++ b/include/asm-ia64/types.h
@@ -13,6 +13,8 @@
* David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
*/
+#include <asm-generic/int-l64.h>
+
#ifdef __ASSEMBLY__
# define __IA64_UL(x) (x)
# define __IA64_UL_CONST(x) x
@@ -28,39 +30,10 @@
typedef unsigned int umode_t;
/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-typedef __signed__ long __s64;
-typedef unsigned long __u64;
-
-/*
* These aren't exported outside the kernel to avoid name space clashes
*/
# ifdef __KERNEL__
-typedef __s8 s8;
-typedef __u8 u8;
-
-typedef __s16 s16;
-typedef __u16 u16;
-
-typedef __s32 s32;
-typedef __u32 u32;
-
-typedef __s64 s64;
-typedef __u64 u64;
-
#define BITS_PER_LONG 64
/* DMA addresses are 64-bits wide, in general. */
diff --git a/include/asm-m32r/types.h b/include/asm-m32r/types.h
index b64c166..bc9f7ff 100644
--- a/include/asm-m32r/types.h
+++ b/include/asm-m32r/types.h
@@ -1,28 +1,12 @@
#ifndef _ASM_M32R_TYPES_H
#define _ASM_M32R_TYPES_H
+#include <asm-generic/int-ll64.h>
+
#ifndef __ASSEMBLY__
typedef unsigned short umode_t;
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
#endif /* __ASSEMBLY__ */
/*
@@ -34,18 +18,6 @@
#ifndef __ASSEMBLY__
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
/* DMA addresses are 32-bits wide. */
typedef u32 dma_addr_t;
diff --git a/include/asm-m68k/div64.h b/include/asm-m68k/div64.h
index 33caad1..8243c93 100644
--- a/include/asm-m68k/div64.h
+++ b/include/asm-m68k/div64.h
@@ -25,5 +25,4 @@
__rem; \
})
-extern uint64_t div64_64(uint64_t dividend, uint64_t divisor);
#endif /* _M68K_DIV64_H */
diff --git a/include/asm-m68k/machw.h b/include/asm-m68k/machw.h
index d2e0e25..3562499 100644
--- a/include/asm-m68k/machw.h
+++ b/include/asm-m68k/machw.h
@@ -66,36 +66,6 @@
# define mac_scc ((*(volatile struct SCC*)MAC_SCC_BAS))
#endif
-/* hardware stuff */
-
-#define MACHW_DECLARE(name) unsigned name : 1
-#define MACHW_SET(name) (mac_hw_present.name = 1)
-#define MACHW_PRESENT(name) (mac_hw_present.name)
-
-struct mac_hw_present {
- /* video hardware */
- /* sound hardware */
- /* disk storage interfaces */
- MACHW_DECLARE(MAC_SCSI_80); /* Directly mapped NCR5380 */
- MACHW_DECLARE(MAC_SCSI_96); /* 53c9[46] */
- MACHW_DECLARE(MAC_SCSI_96_2); /* 2nd 53c9[46] Q900 and Q950 */
- MACHW_DECLARE(IDE); /* IDE Interface */
- /* other I/O hardware */
- MACHW_DECLARE(SCC); /* Serial Communications Contr. */
- /* DMA */
- MACHW_DECLARE(SCSI_DMA); /* DMA for the NCR5380 */
- /* real time clocks */
- MACHW_DECLARE(RTC_CLK); /* clock chip */
- /* supporting hardware */
- MACHW_DECLARE(VIA1); /* Versatile Interface Ad. 1 */
- MACHW_DECLARE(VIA2); /* Versatile Interface Ad. 2 */
- MACHW_DECLARE(RBV); /* Versatile Interface Ad. 2+ */
- /* NUBUS */
- MACHW_DECLARE(NUBUS); /* NUBUS */
-};
-
-extern struct mac_hw_present mac_hw_present;
-
#endif /* __ASSEMBLY__ */
#endif /* linux/machw.h */
diff --git a/include/asm-m68k/types.h b/include/asm-m68k/types.h
index c35c09d..6441cb5 100644
--- a/include/asm-m68k/types.h
+++ b/include/asm-m68k/types.h
@@ -8,30 +8,12 @@
* not a major issue. However, for interoperability, libraries still
* need to be careful to avoid a name clashes.
*/
+#include <asm-generic/int-ll64.h>
#ifndef __ASSEMBLY__
typedef unsigned short umode_t;
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
#endif /* __ASSEMBLY__ */
/*
@@ -43,18 +25,6 @@
#ifndef __ASSEMBLY__
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
/* DMA addresses are always 32-bits wide */
typedef u32 dma_addr_t;
diff --git a/include/asm-m68knommu/dma.h b/include/asm-m68knommu/dma.h
index 3f20419..939a020 100644
--- a/include/asm-m68knommu/dma.h
+++ b/include/asm-m68knommu/dma.h
@@ -35,7 +35,8 @@
/*
* Set number of channels of DMA on ColdFire for different implementations.
*/
-#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
+ defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
#define MAX_M68K_DMA_CHANNELS 4
#elif defined(CONFIG_M5272)
#define MAX_M68K_DMA_CHANNELS 1
diff --git a/include/asm-m68knommu/param.h b/include/asm-m68knommu/param.h
index 96c4510..6044397a 100644
--- a/include/asm-m68knommu/param.h
+++ b/include/asm-m68knommu/param.h
@@ -1,13 +1,16 @@
#ifndef _M68KNOMMU_PARAM_H
#define _M68KNOMMU_PARAM_H
-#define HZ CONFIG_HZ
-
#ifdef __KERNEL__
+#define HZ CONFIG_HZ
#define USER_HZ HZ
#define CLOCKS_PER_SEC (USER_HZ)
#endif
+#ifndef HZ
+#define HZ 100
+#endif
+
#define EXEC_PAGESIZE 4096
#ifndef NOGROUP
diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h
index c2bd126..6427247 100644
--- a/include/asm-mips/bitops.h
+++ b/include/asm-mips/bitops.h
@@ -558,11 +558,13 @@
__clear_bit(nr, addr);
}
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+
/*
* Return the bit position (0..63) of the most significant 1 bit in a word
* Returns -1 if no 1 bit exists
*/
-static inline int __ilog2(unsigned long x)
+static inline unsigned long __fls(unsigned long x)
{
int lz;
@@ -591,13 +593,6 @@
return 63 - lz;
}
-static inline unsigned long __fls(unsigned long x)
-{
- return __ilog2(x);
-}
-
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
-
/*
* __ffs - find first bit in word.
* @word: The word to search
@@ -607,7 +602,7 @@
*/
static inline unsigned long __ffs(unsigned long word)
{
- return __ilog2(word & -word);
+ return __fls(word & -word);
}
/*
@@ -654,6 +649,7 @@
#else
#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/__fls.h>
#include <asm-generic/bitops/ffs.h>
#include <asm-generic/bitops/fls.h>
#include <asm-generic/bitops/fls64.h>
diff --git a/include/asm-mips/compiler.h b/include/asm-mips/compiler.h
index aa6b876..71f5c5c 100644
--- a/include/asm-mips/compiler.h
+++ b/include/asm-mips/compiler.h
@@ -9,10 +9,10 @@
#define _ASM_COMPILER_H
#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)
-#define GCC_IMM_ASM "n"
+#define GCC_IMM_ASM() "n"
#define GCC_REG_ACCUM "$0"
#else
-#define GCC_IMM_ASM "rn"
+#define GCC_IMM_ASM() "rn"
#define GCC_REG_ACCUM "accum"
#endif
diff --git a/include/asm-mips/div64.h b/include/asm-mips/div64.h
index 716371b..d1d6991 100644
--- a/include/asm-mips/div64.h
+++ b/include/asm-mips/div64.h
@@ -82,7 +82,6 @@
(n) = __quot; \
__mod; })
-extern uint64_t div64_64(uint64_t dividend, uint64_t divisor);
#endif /* (_MIPS_SZLONG == 32) */
#if (_MIPS_SZLONG == 64)
@@ -106,11 +105,6 @@
(n) = __quot; \
__mod; })
-static inline uint64_t div64_64(uint64_t dividend, uint64_t divisor)
-{
- return dividend / divisor;
-}
-
#endif /* (_MIPS_SZLONG == 64) */
#endif /* _ASM_DIV64_H */
diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h
index a0555516..363a14e 100644
--- a/include/asm-mips/mach-au1x00/au1000.h
+++ b/include/asm-mips/mach-au1x00/au1000.h
@@ -40,8 +40,8 @@
#include <linux/delay.h>
#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/irq.h>
+#include <linux/io.h>
+#include <linux/irq.h>
/* cpu pipeline flush */
void static inline au_sync(void)
@@ -63,32 +63,32 @@
void static inline au_writeb(u8 val, unsigned long reg)
{
- *(volatile u8 *)(reg) = val;
+ *(volatile u8 *)reg = val;
}
void static inline au_writew(u16 val, unsigned long reg)
{
- *(volatile u16 *)(reg) = val;
+ *(volatile u16 *)reg = val;
}
void static inline au_writel(u32 val, unsigned long reg)
{
- *(volatile u32 *)(reg) = val;
+ *(volatile u32 *)reg = val;
}
static inline u8 au_readb(unsigned long reg)
{
- return (*(volatile u8 *)reg);
+ return *(volatile u8 *)reg;
}
static inline u16 au_readw(unsigned long reg)
{
- return (*(volatile u16 *)reg);
+ return *(volatile u16 *)reg;
}
static inline u32 au_readl(unsigned long reg)
{
- return (*(volatile u32 *)reg);
+ return *(volatile u32 *)reg;
}
@@ -117,76 +117,77 @@
#endif /* !defined (_LANGUAGE_ASSEMBLY) */
/*
- * SDRAM Register Offsets
+ * SDRAM register offsets
*/
-#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1100)
-#define MEM_SDMODE0 (0x0000)
-#define MEM_SDMODE1 (0x0004)
-#define MEM_SDMODE2 (0x0008)
-#define MEM_SDADDR0 (0x000C)
-#define MEM_SDADDR1 (0x0010)
-#define MEM_SDADDR2 (0x0014)
-#define MEM_SDREFCFG (0x0018)
-#define MEM_SDPRECMD (0x001C)
-#define MEM_SDAUTOREF (0x0020)
-#define MEM_SDWRMD0 (0x0024)
-#define MEM_SDWRMD1 (0x0028)
-#define MEM_SDWRMD2 (0x002C)
-#define MEM_SDSLEEP (0x0030)
-#define MEM_SDSMCKE (0x0034)
+#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \
+ defined(CONFIG_SOC_AU1100)
+#define MEM_SDMODE0 0x0000
+#define MEM_SDMODE1 0x0004
+#define MEM_SDMODE2 0x0008
+#define MEM_SDADDR0 0x000C
+#define MEM_SDADDR1 0x0010
+#define MEM_SDADDR2 0x0014
+#define MEM_SDREFCFG 0x0018
+#define MEM_SDPRECMD 0x001C
+#define MEM_SDAUTOREF 0x0020
+#define MEM_SDWRMD0 0x0024
+#define MEM_SDWRMD1 0x0028
+#define MEM_SDWRMD2 0x002C
+#define MEM_SDSLEEP 0x0030
+#define MEM_SDSMCKE 0x0034
/*
* MEM_SDMODE register content definitions
*/
-#define MEM_SDMODE_F (1<<22)
-#define MEM_SDMODE_SR (1<<21)
-#define MEM_SDMODE_BS (1<<20)
-#define MEM_SDMODE_RS (3<<18)
-#define MEM_SDMODE_CS (7<<15)
-#define MEM_SDMODE_TRAS (15<<11)
-#define MEM_SDMODE_TMRD (3<<9)
-#define MEM_SDMODE_TWR (3<<7)
-#define MEM_SDMODE_TRP (3<<5)
-#define MEM_SDMODE_TRCD (3<<3)
-#define MEM_SDMODE_TCL (7<<0)
+#define MEM_SDMODE_F (1 << 22)
+#define MEM_SDMODE_SR (1 << 21)
+#define MEM_SDMODE_BS (1 << 20)
+#define MEM_SDMODE_RS (3 << 18)
+#define MEM_SDMODE_CS (7 << 15)
+#define MEM_SDMODE_TRAS (15 << 11)
+#define MEM_SDMODE_TMRD (3 << 9)
+#define MEM_SDMODE_TWR (3 << 7)
+#define MEM_SDMODE_TRP (3 << 5)
+#define MEM_SDMODE_TRCD (3 << 3)
+#define MEM_SDMODE_TCL (7 << 0)
-#define MEM_SDMODE_BS_2Bank (0<<20)
-#define MEM_SDMODE_BS_4Bank (1<<20)
-#define MEM_SDMODE_RS_11Row (0<<18)
-#define MEM_SDMODE_RS_12Row (1<<18)
-#define MEM_SDMODE_RS_13Row (2<<18)
-#define MEM_SDMODE_RS_N(N) ((N)<<18)
-#define MEM_SDMODE_CS_7Col (0<<15)
-#define MEM_SDMODE_CS_8Col (1<<15)
-#define MEM_SDMODE_CS_9Col (2<<15)
-#define MEM_SDMODE_CS_10Col (3<<15)
-#define MEM_SDMODE_CS_11Col (4<<15)
-#define MEM_SDMODE_CS_N(N) ((N)<<15)
-#define MEM_SDMODE_TRAS_N(N) ((N)<<11)
-#define MEM_SDMODE_TMRD_N(N) ((N)<<9)
-#define MEM_SDMODE_TWR_N(N) ((N)<<7)
-#define MEM_SDMODE_TRP_N(N) ((N)<<5)
-#define MEM_SDMODE_TRCD_N(N) ((N)<<3)
-#define MEM_SDMODE_TCL_N(N) ((N)<<0)
+#define MEM_SDMODE_BS_2Bank (0 << 20)
+#define MEM_SDMODE_BS_4Bank (1 << 20)
+#define MEM_SDMODE_RS_11Row (0 << 18)
+#define MEM_SDMODE_RS_12Row (1 << 18)
+#define MEM_SDMODE_RS_13Row (2 << 18)
+#define MEM_SDMODE_RS_N(N) ((N) << 18)
+#define MEM_SDMODE_CS_7Col (0 << 15)
+#define MEM_SDMODE_CS_8Col (1 << 15)
+#define MEM_SDMODE_CS_9Col (2 << 15)
+#define MEM_SDMODE_CS_10Col (3 << 15)
+#define MEM_SDMODE_CS_11Col (4 << 15)
+#define MEM_SDMODE_CS_N(N) ((N) << 15)
+#define MEM_SDMODE_TRAS_N(N) ((N) << 11)
+#define MEM_SDMODE_TMRD_N(N) ((N) << 9)
+#define MEM_SDMODE_TWR_N(N) ((N) << 7)
+#define MEM_SDMODE_TRP_N(N) ((N) << 5)
+#define MEM_SDMODE_TRCD_N(N) ((N) << 3)
+#define MEM_SDMODE_TCL_N(N) ((N) << 0)
/*
* MEM_SDADDR register contents definitions
*/
-#define MEM_SDADDR_E (1<<20)
-#define MEM_SDADDR_CSBA (0x03FF<<10)
-#define MEM_SDADDR_CSMASK (0x03FF<<0)
-#define MEM_SDADDR_CSBA_N(N) ((N)&(0x03FF<<22)>>12)
-#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF<<22)>>22)
+#define MEM_SDADDR_E (1 << 20)
+#define MEM_SDADDR_CSBA (0x03FF << 10)
+#define MEM_SDADDR_CSMASK (0x03FF << 0)
+#define MEM_SDADDR_CSBA_N(N) ((N) & (0x03FF << 22) >> 12)
+#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF << 22) >> 22)
/*
* MEM_SDREFCFG register content definitions
*/
-#define MEM_SDREFCFG_TRC (15<<28)
-#define MEM_SDREFCFG_TRPM (3<<26)
-#define MEM_SDREFCFG_E (1<<25)
-#define MEM_SDREFCFG_RE (0x1ffffff<<0)
-#define MEM_SDREFCFG_TRC_N(N) ((N)<<MEM_SDREFCFG_TRC)
-#define MEM_SDREFCFG_TRPM_N(N) ((N)<<MEM_SDREFCFG_TRPM)
+#define MEM_SDREFCFG_TRC (15 << 28)
+#define MEM_SDREFCFG_TRPM (3 << 26)
+#define MEM_SDREFCFG_E (1 << 25)
+#define MEM_SDREFCFG_RE (0x1ffffff << 0)
+#define MEM_SDREFCFG_TRC_N(N) ((N) << MEM_SDREFCFG_TRC)
+#define MEM_SDREFCFG_TRPM_N(N) ((N) << MEM_SDREFCFG_TRPM)
#define MEM_SDREFCFG_REF_N(N) (N)
#endif
@@ -199,25 +200,25 @@
/***********************************************************************/
#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-#define MEM_SDMODE0 (0x0800)
-#define MEM_SDMODE1 (0x0808)
-#define MEM_SDMODE2 (0x0810)
-#define MEM_SDADDR0 (0x0820)
-#define MEM_SDADDR1 (0x0828)
-#define MEM_SDADDR2 (0x0830)
-#define MEM_SDCONFIGA (0x0840)
-#define MEM_SDCONFIGB (0x0848)
-#define MEM_SDSTAT (0x0850)
-#define MEM_SDERRADDR (0x0858)
-#define MEM_SDSTRIDE0 (0x0860)
-#define MEM_SDSTRIDE1 (0x0868)
-#define MEM_SDSTRIDE2 (0x0870)
-#define MEM_SDWRMD0 (0x0880)
-#define MEM_SDWRMD1 (0x0888)
-#define MEM_SDWRMD2 (0x0890)
-#define MEM_SDPRECMD (0x08C0)
-#define MEM_SDAUTOREF (0x08C8)
-#define MEM_SDSREF (0x08D0)
+#define MEM_SDMODE0 0x0800
+#define MEM_SDMODE1 0x0808
+#define MEM_SDMODE2 0x0810
+#define MEM_SDADDR0 0x0820
+#define MEM_SDADDR1 0x0828
+#define MEM_SDADDR2 0x0830
+#define MEM_SDCONFIGA 0x0840
+#define MEM_SDCONFIGB 0x0848
+#define MEM_SDSTAT 0x0850
+#define MEM_SDERRADDR 0x0858
+#define MEM_SDSTRIDE0 0x0860
+#define MEM_SDSTRIDE1 0x0868
+#define MEM_SDSTRIDE2 0x0870
+#define MEM_SDWRMD0 0x0880
+#define MEM_SDWRMD1 0x0888
+#define MEM_SDWRMD2 0x0890
+#define MEM_SDPRECMD 0x08C0
+#define MEM_SDAUTOREF 0x08C8
+#define MEM_SDSREF 0x08D0
#define MEM_SDSLEEP MEM_SDSREF
#endif
@@ -256,9 +257,9 @@
#define SSI0_PHYS_ADDR 0x11600000
#define SSI1_PHYS_ADDR 0x11680000
#define SYS_PHYS_ADDR 0x11900000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/********************************************************************/
@@ -290,13 +291,13 @@
#define UART3_PHYS_ADDR 0x11400000
#define GPIO2_PHYS_ADDR 0x11700000
#define SYS_PHYS_ADDR 0x11900000
-#define PCI_MEM_PHYS_ADDR 0x400000000ULL
-#define PCI_IO_PHYS_ADDR 0x500000000ULL
-#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
-#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#define PCI_MEM_PHYS_ADDR 0x400000000ULL
+#define PCI_IO_PHYS_ADDR 0x500000000ULL
+#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
+#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/********************************************************************/
@@ -333,9 +334,9 @@
#define GPIO2_PHYS_ADDR 0x11700000
#define SYS_PHYS_ADDR 0x11900000
#define LCD_PHYS_ADDR 0x15000000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/***********************************************************************/
@@ -360,17 +361,17 @@
#define SYS_PHYS_ADDR 0x11900000
#define DDMA_PHYS_ADDR 0x14002000
#define PE_PHYS_ADDR 0x14008000
-#define PSC0_PHYS_ADDR 0x11A00000
-#define PSC1_PHYS_ADDR 0x11B00000
-#define PSC2_PHYS_ADDR 0x10A00000
-#define PSC3_PHYS_ADDR 0x10B00000
-#define PCI_MEM_PHYS_ADDR 0x400000000ULL
-#define PCI_IO_PHYS_ADDR 0x500000000ULL
-#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
-#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#define PSC0_PHYS_ADDR 0x11A00000
+#define PSC1_PHYS_ADDR 0x11B00000
+#define PSC2_PHYS_ADDR 0x10A00000
+#define PSC3_PHYS_ADDR 0x10B00000
+#define PCI_MEM_PHYS_ADDR 0x400000000ULL
+#define PCI_IO_PHYS_ADDR 0x500000000ULL
+#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
+#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/***********************************************************************/
@@ -397,122 +398,121 @@
#define SWCNT_PHYS_ADDR 0x1110010C
#define MAEFE_PHYS_ADDR 0x14012000
#define MAEBE_PHYS_ADDR 0x14010000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
-
/* Static Bus Controller */
-#define MEM_STCFG0 0xB4001000
-#define MEM_STTIME0 0xB4001004
-#define MEM_STADDR0 0xB4001008
+#define MEM_STCFG0 0xB4001000
+#define MEM_STTIME0 0xB4001004
+#define MEM_STADDR0 0xB4001008
-#define MEM_STCFG1 0xB4001010
-#define MEM_STTIME1 0xB4001014
-#define MEM_STADDR1 0xB4001018
+#define MEM_STCFG1 0xB4001010
+#define MEM_STTIME1 0xB4001014
+#define MEM_STADDR1 0xB4001018
-#define MEM_STCFG2 0xB4001020
-#define MEM_STTIME2 0xB4001024
-#define MEM_STADDR2 0xB4001028
+#define MEM_STCFG2 0xB4001020
+#define MEM_STTIME2 0xB4001024
+#define MEM_STADDR2 0xB4001028
-#define MEM_STCFG3 0xB4001030
-#define MEM_STTIME3 0xB4001034
-#define MEM_STADDR3 0xB4001038
+#define MEM_STCFG3 0xB4001030
+#define MEM_STTIME3 0xB4001034
+#define MEM_STADDR3 0xB4001038
#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-#define MEM_STNDCTL 0xB4001100
-#define MEM_STSTAT 0xB4001104
+#define MEM_STNDCTL 0xB4001100
+#define MEM_STSTAT 0xB4001104
-#define MEM_STNAND_CMD (0x0)
-#define MEM_STNAND_ADDR (0x4)
-#define MEM_STNAND_DATA (0x20)
+#define MEM_STNAND_CMD 0x0
+#define MEM_STNAND_ADDR 0x4
+#define MEM_STNAND_DATA 0x20
#endif
/* Interrupt Controller 0 */
-#define IC0_CFG0RD 0xB0400040
-#define IC0_CFG0SET 0xB0400040
-#define IC0_CFG0CLR 0xB0400044
+#define IC0_CFG0RD 0xB0400040
+#define IC0_CFG0SET 0xB0400040
+#define IC0_CFG0CLR 0xB0400044
-#define IC0_CFG1RD 0xB0400048
-#define IC0_CFG1SET 0xB0400048
-#define IC0_CFG1CLR 0xB040004C
+#define IC0_CFG1RD 0xB0400048
+#define IC0_CFG1SET 0xB0400048
+#define IC0_CFG1CLR 0xB040004C
-#define IC0_CFG2RD 0xB0400050
-#define IC0_CFG2SET 0xB0400050
-#define IC0_CFG2CLR 0xB0400054
+#define IC0_CFG2RD 0xB0400050
+#define IC0_CFG2SET 0xB0400050
+#define IC0_CFG2CLR 0xB0400054
-#define IC0_REQ0INT 0xB0400054
-#define IC0_SRCRD 0xB0400058
-#define IC0_SRCSET 0xB0400058
-#define IC0_SRCCLR 0xB040005C
-#define IC0_REQ1INT 0xB040005C
+#define IC0_REQ0INT 0xB0400054
+#define IC0_SRCRD 0xB0400058
+#define IC0_SRCSET 0xB0400058
+#define IC0_SRCCLR 0xB040005C
+#define IC0_REQ1INT 0xB040005C
-#define IC0_ASSIGNRD 0xB0400060
-#define IC0_ASSIGNSET 0xB0400060
-#define IC0_ASSIGNCLR 0xB0400064
+#define IC0_ASSIGNRD 0xB0400060
+#define IC0_ASSIGNSET 0xB0400060
+#define IC0_ASSIGNCLR 0xB0400064
-#define IC0_WAKERD 0xB0400068
-#define IC0_WAKESET 0xB0400068
-#define IC0_WAKECLR 0xB040006C
+#define IC0_WAKERD 0xB0400068
+#define IC0_WAKESET 0xB0400068
+#define IC0_WAKECLR 0xB040006C
-#define IC0_MASKRD 0xB0400070
-#define IC0_MASKSET 0xB0400070
-#define IC0_MASKCLR 0xB0400074
+#define IC0_MASKRD 0xB0400070
+#define IC0_MASKSET 0xB0400070
+#define IC0_MASKCLR 0xB0400074
-#define IC0_RISINGRD 0xB0400078
-#define IC0_RISINGCLR 0xB0400078
-#define IC0_FALLINGRD 0xB040007C
-#define IC0_FALLINGCLR 0xB040007C
+#define IC0_RISINGRD 0xB0400078
+#define IC0_RISINGCLR 0xB0400078
+#define IC0_FALLINGRD 0xB040007C
+#define IC0_FALLINGCLR 0xB040007C
-#define IC0_TESTBIT 0xB0400080
+#define IC0_TESTBIT 0xB0400080
/* Interrupt Controller 1 */
-#define IC1_CFG0RD 0xB1800040
-#define IC1_CFG0SET 0xB1800040
-#define IC1_CFG0CLR 0xB1800044
+#define IC1_CFG0RD 0xB1800040
+#define IC1_CFG0SET 0xB1800040
+#define IC1_CFG0CLR 0xB1800044
-#define IC1_CFG1RD 0xB1800048
-#define IC1_CFG1SET 0xB1800048
-#define IC1_CFG1CLR 0xB180004C
+#define IC1_CFG1RD 0xB1800048
+#define IC1_CFG1SET 0xB1800048
+#define IC1_CFG1CLR 0xB180004C
-#define IC1_CFG2RD 0xB1800050
-#define IC1_CFG2SET 0xB1800050
-#define IC1_CFG2CLR 0xB1800054
+#define IC1_CFG2RD 0xB1800050
+#define IC1_CFG2SET 0xB1800050
+#define IC1_CFG2CLR 0xB1800054
-#define IC1_REQ0INT 0xB1800054
-#define IC1_SRCRD 0xB1800058
-#define IC1_SRCSET 0xB1800058
-#define IC1_SRCCLR 0xB180005C
-#define IC1_REQ1INT 0xB180005C
+#define IC1_REQ0INT 0xB1800054
+#define IC1_SRCRD 0xB1800058
+#define IC1_SRCSET 0xB1800058
+#define IC1_SRCCLR 0xB180005C
+#define IC1_REQ1INT 0xB180005C
-#define IC1_ASSIGNRD 0xB1800060
-#define IC1_ASSIGNSET 0xB1800060
-#define IC1_ASSIGNCLR 0xB1800064
+#define IC1_ASSIGNRD 0xB1800060
+#define IC1_ASSIGNSET 0xB1800060
+#define IC1_ASSIGNCLR 0xB1800064
-#define IC1_WAKERD 0xB1800068
-#define IC1_WAKESET 0xB1800068
-#define IC1_WAKECLR 0xB180006C
+#define IC1_WAKERD 0xB1800068
+#define IC1_WAKESET 0xB1800068
+#define IC1_WAKECLR 0xB180006C
-#define IC1_MASKRD 0xB1800070
-#define IC1_MASKSET 0xB1800070
-#define IC1_MASKCLR 0xB1800074
+#define IC1_MASKRD 0xB1800070
+#define IC1_MASKSET 0xB1800070
+#define IC1_MASKCLR 0xB1800074
-#define IC1_RISINGRD 0xB1800078
-#define IC1_RISINGCLR 0xB1800078
-#define IC1_FALLINGRD 0xB180007C
-#define IC1_FALLINGCLR 0xB180007C
+#define IC1_RISINGRD 0xB1800078
+#define IC1_RISINGCLR 0xB1800078
+#define IC1_FALLINGRD 0xB180007C
+#define IC1_FALLINGCLR 0xB180007C
-#define IC1_TESTBIT 0xB1800080
+#define IC1_TESTBIT 0xB1800080
/* Interrupt Configuration Modes */
-#define INTC_INT_DISABLED 0
-#define INTC_INT_RISE_EDGE 0x1
-#define INTC_INT_FALL_EDGE 0x2
-#define INTC_INT_RISE_AND_FALL_EDGE 0x3
-#define INTC_INT_HIGH_LEVEL 0x5
-#define INTC_INT_LOW_LEVEL 0x6
-#define INTC_INT_HIGH_AND_LOW_LEVEL 0x7
+#define INTC_INT_DISABLED 0x0
+#define INTC_INT_RISE_EDGE 0x1
+#define INTC_INT_FALL_EDGE 0x2
+#define INTC_INT_RISE_AND_FALL_EDGE 0x3
+#define INTC_INT_HIGH_LEVEL 0x5
+#define INTC_INT_LOW_LEVEL 0x6
+#define INTC_INT_HIGH_AND_LOW_LEVEL 0x7
/* Interrupt Numbers */
/* Au1000 */
@@ -579,18 +579,18 @@
AU1000_GPIO_31,
};
-#define UART0_ADDR 0xB1100000
-#define UART1_ADDR 0xB1200000
-#define UART2_ADDR 0xB1300000
-#define UART3_ADDR 0xB1400000
+#define UART0_ADDR 0xB1100000
+#define UART1_ADDR 0xB1200000
+#define UART2_ADDR 0xB1300000
+#define UART3_ADDR 0xB1400000
-#define USB_OHCI_BASE 0x10100000 // phys addr for ioremap
-#define USB_HOST_CONFIG 0xB017fffc
+#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
+#define USB_HOST_CONFIG 0xB017FFFC
-#define AU1000_ETH0_BASE 0xB0500000
-#define AU1000_ETH1_BASE 0xB0510000
-#define AU1000_MAC0_ENABLE 0xB0520000
-#define AU1000_MAC1_ENABLE 0xB0520004
+#define AU1000_ETH0_BASE 0xB0500000
+#define AU1000_ETH1_BASE 0xB0510000
+#define AU1000_MAC0_ENABLE 0xB0520000
+#define AU1000_MAC1_ENABLE 0xB0520004
#define NUM_ETH_INTERFACES 2
#endif /* CONFIG_SOC_AU1000 */
@@ -662,16 +662,16 @@
#define INTC AU1000_PCI_INTC
#define INTD AU1000_PCI_INTD
-#define UART0_ADDR 0xB1100000
-#define UART3_ADDR 0xB1400000
+#define UART0_ADDR 0xB1100000
+#define UART3_ADDR 0xB1400000
-#define USB_OHCI_BASE 0x10100000 // phys addr for ioremap
-#define USB_HOST_CONFIG 0xB017fffc
+#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
+#define USB_HOST_CONFIG 0xB017fffc
-#define AU1500_ETH0_BASE 0xB1500000
-#define AU1500_ETH1_BASE 0xB1510000
-#define AU1500_MAC0_ENABLE 0xB1520000
-#define AU1500_MAC1_ENABLE 0xB1520004
+#define AU1500_ETH0_BASE 0xB1500000
+#define AU1500_ETH1_BASE 0xB1510000
+#define AU1500_MAC0_ENABLE 0xB1520000
+#define AU1500_MAC1_ENABLE 0xB1520004
#define NUM_ETH_INTERFACES 2
#endif /* CONFIG_SOC_AU1500 */
@@ -739,15 +739,15 @@
AU1000_GPIO_31,
};
-#define UART0_ADDR 0xB1100000
-#define UART1_ADDR 0xB1200000
-#define UART3_ADDR 0xB1400000
+#define UART0_ADDR 0xB1100000
+#define UART1_ADDR 0xB1200000
+#define UART3_ADDR 0xB1400000
-#define USB_OHCI_BASE 0x10100000 // phys addr for ioremap
-#define USB_HOST_CONFIG 0xB017fffc
+#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
+#define USB_HOST_CONFIG 0xB017FFFC
-#define AU1100_ETH0_BASE 0xB0500000
-#define AU1100_MAC0_ENABLE 0xB0520000
+#define AU1100_ETH0_BASE 0xB0500000
+#define AU1100_MAC0_ENABLE 0xB0520000
#define NUM_ETH_INTERFACES 1
#endif /* CONFIG_SOC_AU1100 */
@@ -826,18 +826,18 @@
#define INTC AU1550_PCI_INTC
#define INTD AU1550_PCI_INTD
-#define UART0_ADDR 0xB1100000
-#define UART1_ADDR 0xB1200000
-#define UART3_ADDR 0xB1400000
+#define UART0_ADDR 0xB1100000
+#define UART1_ADDR 0xB1200000
+#define UART3_ADDR 0xB1400000
-#define USB_OHCI_BASE 0x14020000 // phys addr for ioremap
-#define USB_OHCI_LEN 0x00060000
-#define USB_HOST_CONFIG 0xB4027ffc
+#define USB_OHCI_BASE 0x14020000 /* phys addr for ioremap */
+#define USB_OHCI_LEN 0x00060000
+#define USB_HOST_CONFIG 0xB4027ffc
-#define AU1550_ETH0_BASE 0xB0500000
-#define AU1550_ETH1_BASE 0xB0510000
-#define AU1550_MAC0_ENABLE 0xB0520000
-#define AU1550_MAC1_ENABLE 0xB0520004
+#define AU1550_ETH0_BASE 0xB0500000
+#define AU1550_ETH1_BASE 0xB0510000
+#define AU1550_MAC0_ENABLE 0xB0520000
+#define AU1550_MAC1_ENABLE 0xB0520004
#define NUM_ETH_INTERFACES 2
#endif /* CONFIG_SOC_AU1550 */
@@ -911,32 +911,32 @@
AU1000_GPIO_31,
};
-#define UART0_ADDR 0xB1100000
-#define UART1_ADDR 0xB1200000
+#define UART0_ADDR 0xB1100000
+#define UART1_ADDR 0xB1200000
-#define USB_UOC_BASE 0x14020020
-#define USB_UOC_LEN 0x20
-#define USB_OHCI_BASE 0x14020100
-#define USB_OHCI_LEN 0x100
-#define USB_EHCI_BASE 0x14020200
-#define USB_EHCI_LEN 0x100
-#define USB_UDC_BASE 0x14022000
-#define USB_UDC_LEN 0x2000
-#define USB_MSR_BASE 0xB4020000
-#define USB_MSR_MCFG 4
-#define USBMSRMCFG_OMEMEN 0
-#define USBMSRMCFG_OBMEN 1
-#define USBMSRMCFG_EMEMEN 2
-#define USBMSRMCFG_EBMEN 3
-#define USBMSRMCFG_DMEMEN 4
-#define USBMSRMCFG_DBMEN 5
-#define USBMSRMCFG_GMEMEN 6
-#define USBMSRMCFG_OHCCLKEN 16
-#define USBMSRMCFG_EHCCLKEN 17
-#define USBMSRMCFG_UDCCLKEN 18
-#define USBMSRMCFG_PHYPLLEN 19
-#define USBMSRMCFG_RDCOMB 30
-#define USBMSRMCFG_PFEN 31
+#define USB_UOC_BASE 0x14020020
+#define USB_UOC_LEN 0x20
+#define USB_OHCI_BASE 0x14020100
+#define USB_OHCI_LEN 0x100
+#define USB_EHCI_BASE 0x14020200
+#define USB_EHCI_LEN 0x100
+#define USB_UDC_BASE 0x14022000
+#define USB_UDC_LEN 0x2000
+#define USB_MSR_BASE 0xB4020000
+#define USB_MSR_MCFG 4
+#define USBMSRMCFG_OMEMEN 0
+#define USBMSRMCFG_OBMEN 1
+#define USBMSRMCFG_EMEMEN 2
+#define USBMSRMCFG_EBMEN 3
+#define USBMSRMCFG_DMEMEN 4
+#define USBMSRMCFG_DBMEN 5
+#define USBMSRMCFG_GMEMEN 6
+#define USBMSRMCFG_OHCCLKEN 16
+#define USBMSRMCFG_EHCCLKEN 17
+#define USBMSRMCFG_UDCCLKEN 18
+#define USBMSRMCFG_PHYPLLEN 19
+#define USBMSRMCFG_RDCOMB 30
+#define USBMSRMCFG_PFEN 31
#endif /* CONFIG_SOC_AU1200 */
@@ -949,259 +949,258 @@
#define INTX 0xFF /* not valid */
/* Programmable Counters 0 and 1 */
-#define SYS_BASE 0xB1900000
-#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14)
-# define SYS_CNTRL_E1S (1<<23)
-# define SYS_CNTRL_T1S (1<<20)
-# define SYS_CNTRL_M21 (1<<19)
-# define SYS_CNTRL_M11 (1<<18)
-# define SYS_CNTRL_M01 (1<<17)
-# define SYS_CNTRL_C1S (1<<16)
-# define SYS_CNTRL_BP (1<<14)
-# define SYS_CNTRL_EN1 (1<<13)
-# define SYS_CNTRL_BT1 (1<<12)
-# define SYS_CNTRL_EN0 (1<<11)
-# define SYS_CNTRL_BT0 (1<<10)
-# define SYS_CNTRL_E0 (1<<8)
-# define SYS_CNTRL_E0S (1<<7)
-# define SYS_CNTRL_32S (1<<5)
-# define SYS_CNTRL_T0S (1<<4)
-# define SYS_CNTRL_M20 (1<<3)
-# define SYS_CNTRL_M10 (1<<2)
-# define SYS_CNTRL_M00 (1<<1)
-# define SYS_CNTRL_C0S (1<<0)
+#define SYS_BASE 0xB1900000
+#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14)
+# define SYS_CNTRL_E1S (1 << 23)
+# define SYS_CNTRL_T1S (1 << 20)
+# define SYS_CNTRL_M21 (1 << 19)
+# define SYS_CNTRL_M11 (1 << 18)
+# define SYS_CNTRL_M01 (1 << 17)
+# define SYS_CNTRL_C1S (1 << 16)
+# define SYS_CNTRL_BP (1 << 14)
+# define SYS_CNTRL_EN1 (1 << 13)
+# define SYS_CNTRL_BT1 (1 << 12)
+# define SYS_CNTRL_EN0 (1 << 11)
+# define SYS_CNTRL_BT0 (1 << 10)
+# define SYS_CNTRL_E0 (1 << 8)
+# define SYS_CNTRL_E0S (1 << 7)
+# define SYS_CNTRL_32S (1 << 5)
+# define SYS_CNTRL_T0S (1 << 4)
+# define SYS_CNTRL_M20 (1 << 3)
+# define SYS_CNTRL_M10 (1 << 2)
+# define SYS_CNTRL_M00 (1 << 1)
+# define SYS_CNTRL_C0S (1 << 0)
/* Programmable Counter 0 Registers */
-#define SYS_TOYTRIM (SYS_BASE + 0)
-#define SYS_TOYWRITE (SYS_BASE + 4)
-#define SYS_TOYMATCH0 (SYS_BASE + 8)
-#define SYS_TOYMATCH1 (SYS_BASE + 0xC)
-#define SYS_TOYMATCH2 (SYS_BASE + 0x10)
-#define SYS_TOYREAD (SYS_BASE + 0x40)
+#define SYS_TOYTRIM (SYS_BASE + 0)
+#define SYS_TOYWRITE (SYS_BASE + 4)
+#define SYS_TOYMATCH0 (SYS_BASE + 8)
+#define SYS_TOYMATCH1 (SYS_BASE + 0xC)
+#define SYS_TOYMATCH2 (SYS_BASE + 0x10)
+#define SYS_TOYREAD (SYS_BASE + 0x40)
/* Programmable Counter 1 Registers */
-#define SYS_RTCTRIM (SYS_BASE + 0x44)
-#define SYS_RTCWRITE (SYS_BASE + 0x48)
-#define SYS_RTCMATCH0 (SYS_BASE + 0x4C)
-#define SYS_RTCMATCH1 (SYS_BASE + 0x50)
-#define SYS_RTCMATCH2 (SYS_BASE + 0x54)
-#define SYS_RTCREAD (SYS_BASE + 0x58)
+#define SYS_RTCTRIM (SYS_BASE + 0x44)
+#define SYS_RTCWRITE (SYS_BASE + 0x48)
+#define SYS_RTCMATCH0 (SYS_BASE + 0x4C)
+#define SYS_RTCMATCH1 (SYS_BASE + 0x50)
+#define SYS_RTCMATCH2 (SYS_BASE + 0x54)
+#define SYS_RTCREAD (SYS_BASE + 0x58)
/* I2S Controller */
-#define I2S_DATA 0xB1000000
-# define I2S_DATA_MASK (0xffffff)
-#define I2S_CONFIG 0xB1000004
-# define I2S_CONFIG_XU (1<<25)
-# define I2S_CONFIG_XO (1<<24)
-# define I2S_CONFIG_RU (1<<23)
-# define I2S_CONFIG_RO (1<<22)
-# define I2S_CONFIG_TR (1<<21)
-# define I2S_CONFIG_TE (1<<20)
-# define I2S_CONFIG_TF (1<<19)
-# define I2S_CONFIG_RR (1<<18)
-# define I2S_CONFIG_RE (1<<17)
-# define I2S_CONFIG_RF (1<<16)
-# define I2S_CONFIG_PD (1<<11)
-# define I2S_CONFIG_LB (1<<10)
-# define I2S_CONFIG_IC (1<<9)
-# define I2S_CONFIG_FM_BIT 7
-# define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT)
-# define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT)
-# define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT)
-# define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT)
-# define I2S_CONFIG_TN (1<<6)
-# define I2S_CONFIG_RN (1<<5)
-# define I2S_CONFIG_SZ_BIT 0
-# define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT)
+#define I2S_DATA 0xB1000000
+# define I2S_DATA_MASK 0xffffff
+#define I2S_CONFIG 0xB1000004
+# define I2S_CONFIG_XU (1 << 25)
+# define I2S_CONFIG_XO (1 << 24)
+# define I2S_CONFIG_RU (1 << 23)
+# define I2S_CONFIG_RO (1 << 22)
+# define I2S_CONFIG_TR (1 << 21)
+# define I2S_CONFIG_TE (1 << 20)
+# define I2S_CONFIG_TF (1 << 19)
+# define I2S_CONFIG_RR (1 << 18)
+# define I2S_CONFIG_RE (1 << 17)
+# define I2S_CONFIG_RF (1 << 16)
+# define I2S_CONFIG_PD (1 << 11)
+# define I2S_CONFIG_LB (1 << 10)
+# define I2S_CONFIG_IC (1 << 9)
+# define I2S_CONFIG_FM_BIT 7
+# define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT)
+# define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT)
+# define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT)
+# define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT)
+# define I2S_CONFIG_TN (1 << 6)
+# define I2S_CONFIG_RN (1 << 5)
+# define I2S_CONFIG_SZ_BIT 0
+# define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT)
-#define I2S_CONTROL 0xB1000008
-# define I2S_CONTROL_D (1<<1)
-# define I2S_CONTROL_CE (1<<0)
+#define I2S_CONTROL 0xB1000008
+# define I2S_CONTROL_D (1 << 1)
+# define I2S_CONTROL_CE (1 << 0)
/* USB Host Controller */
#ifndef USB_OHCI_LEN
-#define USB_OHCI_LEN 0x00100000
+#define USB_OHCI_LEN 0x00100000
#endif
#ifndef CONFIG_SOC_AU1200
/* USB Device Controller */
-#define USBD_EP0RD 0xB0200000
-#define USBD_EP0WR 0xB0200004
-#define USBD_EP2WR 0xB0200008
-#define USBD_EP3WR 0xB020000C
-#define USBD_EP4RD 0xB0200010
-#define USBD_EP5RD 0xB0200014
-#define USBD_INTEN 0xB0200018
-#define USBD_INTSTAT 0xB020001C
-# define USBDEV_INT_SOF (1<<12)
-# define USBDEV_INT_HF_BIT 6
-# define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT)
-# define USBDEV_INT_CMPLT_BIT 0
+#define USBD_EP0RD 0xB0200000
+#define USBD_EP0WR 0xB0200004
+#define USBD_EP2WR 0xB0200008
+#define USBD_EP3WR 0xB020000C
+#define USBD_EP4RD 0xB0200010
+#define USBD_EP5RD 0xB0200014
+#define USBD_INTEN 0xB0200018
+#define USBD_INTSTAT 0xB020001C
+# define USBDEV_INT_SOF (1 << 12)
+# define USBDEV_INT_HF_BIT 6
+# define USBDEV_INT_HF_MASK 0x3f << USBDEV_INT_HF_BIT)
+# define USBDEV_INT_CMPLT_BIT 0
# define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT)
-#define USBD_CONFIG 0xB0200020
-#define USBD_EP0CS 0xB0200024
-#define USBD_EP2CS 0xB0200028
-#define USBD_EP3CS 0xB020002C
-#define USBD_EP4CS 0xB0200030
-#define USBD_EP5CS 0xB0200034
-# define USBDEV_CS_SU (1<<14)
-# define USBDEV_CS_NAK (1<<13)
-# define USBDEV_CS_ACK (1<<12)
-# define USBDEV_CS_BUSY (1<<11)
-# define USBDEV_CS_TSIZE_BIT 1
-# define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT)
-# define USBDEV_CS_STALL (1<<0)
-#define USBD_EP0RDSTAT 0xB0200040
-#define USBD_EP0WRSTAT 0xB0200044
-#define USBD_EP2WRSTAT 0xB0200048
-#define USBD_EP3WRSTAT 0xB020004C
-#define USBD_EP4RDSTAT 0xB0200050
-#define USBD_EP5RDSTAT 0xB0200054
-# define USBDEV_FSTAT_FLUSH (1<<6)
-# define USBDEV_FSTAT_UF (1<<5)
-# define USBDEV_FSTAT_OF (1<<4)
-# define USBDEV_FSTAT_FCNT_BIT 0
+#define USBD_CONFIG 0xB0200020
+#define USBD_EP0CS 0xB0200024
+#define USBD_EP2CS 0xB0200028
+#define USBD_EP3CS 0xB020002C
+#define USBD_EP4CS 0xB0200030
+#define USBD_EP5CS 0xB0200034
+# define USBDEV_CS_SU (1 << 14)
+# define USBDEV_CS_NAK (1 << 13)
+# define USBDEV_CS_ACK (1 << 12)
+# define USBDEV_CS_BUSY (1 << 11)
+# define USBDEV_CS_TSIZE_BIT 1
+# define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT)
+# define USBDEV_CS_STALL (1 << 0)
+#define USBD_EP0RDSTAT 0xB0200040
+#define USBD_EP0WRSTAT 0xB0200044
+#define USBD_EP2WRSTAT 0xB0200048
+#define USBD_EP3WRSTAT 0xB020004C
+#define USBD_EP4RDSTAT 0xB0200050
+#define USBD_EP5RDSTAT 0xB0200054
+# define USBDEV_FSTAT_FLUSH (1 << 6)
+# define USBDEV_FSTAT_UF (1 << 5)
+# define USBDEV_FSTAT_OF (1 << 4)
+# define USBDEV_FSTAT_FCNT_BIT 0
# define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT)
-#define USBD_ENABLE 0xB0200058
-# define USBDEV_ENABLE (1<<1)
-# define USBDEV_CE (1<<0)
+#define USBD_ENABLE 0xB0200058
+# define USBDEV_ENABLE (1 << 1)
+# define USBDEV_CE (1 << 0)
#endif /* !CONFIG_SOC_AU1200 */
/* Ethernet Controllers */
/* 4 byte offsets from AU1000_ETH_BASE */
-#define MAC_CONTROL 0x0
-# define MAC_RX_ENABLE (1<<2)
-# define MAC_TX_ENABLE (1<<3)
-# define MAC_DEF_CHECK (1<<5)
-# define MAC_SET_BL(X) (((X)&0x3)<<6)
-# define MAC_AUTO_PAD (1<<8)
-# define MAC_DISABLE_RETRY (1<<10)
-# define MAC_DISABLE_BCAST (1<<11)
-# define MAC_LATE_COL (1<<12)
-# define MAC_HASH_MODE (1<<13)
-# define MAC_HASH_ONLY (1<<15)
-# define MAC_PASS_ALL (1<<16)
-# define MAC_INVERSE_FILTER (1<<17)
-# define MAC_PROMISCUOUS (1<<18)
-# define MAC_PASS_ALL_MULTI (1<<19)
-# define MAC_FULL_DUPLEX (1<<20)
-# define MAC_NORMAL_MODE 0
-# define MAC_INT_LOOPBACK (1<<21)
-# define MAC_EXT_LOOPBACK (1<<22)
-# define MAC_DISABLE_RX_OWN (1<<23)
-# define MAC_BIG_ENDIAN (1<<30)
-# define MAC_RX_ALL (1<<31)
-#define MAC_ADDRESS_HIGH 0x4
-#define MAC_ADDRESS_LOW 0x8
-#define MAC_MCAST_HIGH 0xC
-#define MAC_MCAST_LOW 0x10
-#define MAC_MII_CNTRL 0x14
-# define MAC_MII_BUSY (1<<0)
-# define MAC_MII_READ 0
-# define MAC_MII_WRITE (1<<1)
-# define MAC_SET_MII_SELECT_REG(X) (((X)&0x1f)<<6)
-# define MAC_SET_MII_SELECT_PHY(X) (((X)&0x1f)<<11)
-#define MAC_MII_DATA 0x18
-#define MAC_FLOW_CNTRL 0x1C
-# define MAC_FLOW_CNTRL_BUSY (1<<0)
-# define MAC_FLOW_CNTRL_ENABLE (1<<1)
-# define MAC_PASS_CONTROL (1<<2)
-# define MAC_SET_PAUSE(X) (((X)&0xffff)<<16)
-#define MAC_VLAN1_TAG 0x20
-#define MAC_VLAN2_TAG 0x24
+#define MAC_CONTROL 0x0
+# define MAC_RX_ENABLE (1 << 2)
+# define MAC_TX_ENABLE (1 << 3)
+# define MAC_DEF_CHECK (1 << 5)
+# define MAC_SET_BL(X) (((X) & 0x3) << 6)
+# define MAC_AUTO_PAD (1 << 8)
+# define MAC_DISABLE_RETRY (1 << 10)
+# define MAC_DISABLE_BCAST (1 << 11)
+# define MAC_LATE_COL (1 << 12)
+# define MAC_HASH_MODE (1 << 13)
+# define MAC_HASH_ONLY (1 << 15)
+# define MAC_PASS_ALL (1 << 16)
+# define MAC_INVERSE_FILTER (1 << 17)
+# define MAC_PROMISCUOUS (1 << 18)
+# define MAC_PASS_ALL_MULTI (1 << 19)
+# define MAC_FULL_DUPLEX (1 << 20)
+# define MAC_NORMAL_MODE 0
+# define MAC_INT_LOOPBACK (1 << 21)
+# define MAC_EXT_LOOPBACK (1 << 22)
+# define MAC_DISABLE_RX_OWN (1 << 23)
+# define MAC_BIG_ENDIAN (1 << 30)
+# define MAC_RX_ALL (1 << 31)
+#define MAC_ADDRESS_HIGH 0x4
+#define MAC_ADDRESS_LOW 0x8
+#define MAC_MCAST_HIGH 0xC
+#define MAC_MCAST_LOW 0x10
+#define MAC_MII_CNTRL 0x14
+# define MAC_MII_BUSY (1 << 0)
+# define MAC_MII_READ 0
+# define MAC_MII_WRITE (1 << 1)
+# define MAC_SET_MII_SELECT_REG(X) (((X) & 0x1f) << 6)
+# define MAC_SET_MII_SELECT_PHY(X) (((X) & 0x1f) << 11)
+#define MAC_MII_DATA 0x18
+#define MAC_FLOW_CNTRL 0x1C
+# define MAC_FLOW_CNTRL_BUSY (1 << 0)
+# define MAC_FLOW_CNTRL_ENABLE (1 << 1)
+# define MAC_PASS_CONTROL (1 << 2)
+# define MAC_SET_PAUSE(X) (((X) & 0xffff) << 16)
+#define MAC_VLAN1_TAG 0x20
+#define MAC_VLAN2_TAG 0x24
/* Ethernet Controller Enable */
-# define MAC_EN_CLOCK_ENABLE (1<<0)
-# define MAC_EN_RESET0 (1<<1)
-# define MAC_EN_TOSS (0<<2)
-# define MAC_EN_CACHEABLE (1<<3)
-# define MAC_EN_RESET1 (1<<4)
-# define MAC_EN_RESET2 (1<<5)
-# define MAC_DMA_RESET (1<<6)
+# define MAC_EN_CLOCK_ENABLE (1 << 0)
+# define MAC_EN_RESET0 (1 << 1)
+# define MAC_EN_TOSS (0 << 2)
+# define MAC_EN_CACHEABLE (1 << 3)
+# define MAC_EN_RESET1 (1 << 4)
+# define MAC_EN_RESET2 (1 << 5)
+# define MAC_DMA_RESET (1 << 6)
/* Ethernet Controller DMA Channels */
-#define MAC0_TX_DMA_ADDR 0xB4004000
-#define MAC1_TX_DMA_ADDR 0xB4004200
+#define MAC0_TX_DMA_ADDR 0xB4004000
+#define MAC1_TX_DMA_ADDR 0xB4004200
/* offsets from MAC_TX_RING_ADDR address */
-#define MAC_TX_BUFF0_STATUS 0x0
-# define TX_FRAME_ABORTED (1<<0)
-# define TX_JAB_TIMEOUT (1<<1)
-# define TX_NO_CARRIER (1<<2)
-# define TX_LOSS_CARRIER (1<<3)
-# define TX_EXC_DEF (1<<4)
-# define TX_LATE_COLL_ABORT (1<<5)
-# define TX_EXC_COLL (1<<6)
-# define TX_UNDERRUN (1<<7)
-# define TX_DEFERRED (1<<8)
-# define TX_LATE_COLL (1<<9)
-# define TX_COLL_CNT_MASK (0xF<<10)
-# define TX_PKT_RETRY (1<<31)
-#define MAC_TX_BUFF0_ADDR 0x4
-# define TX_DMA_ENABLE (1<<0)
-# define TX_T_DONE (1<<1)
-# define TX_GET_DMA_BUFFER(X) (((X)>>2)&0x3)
-#define MAC_TX_BUFF0_LEN 0x8
-#define MAC_TX_BUFF1_STATUS 0x10
-#define MAC_TX_BUFF1_ADDR 0x14
-#define MAC_TX_BUFF1_LEN 0x18
-#define MAC_TX_BUFF2_STATUS 0x20
-#define MAC_TX_BUFF2_ADDR 0x24
-#define MAC_TX_BUFF2_LEN 0x28
-#define MAC_TX_BUFF3_STATUS 0x30
-#define MAC_TX_BUFF3_ADDR 0x34
-#define MAC_TX_BUFF3_LEN 0x38
+#define MAC_TX_BUFF0_STATUS 0x0
+# define TX_FRAME_ABORTED (1 << 0)
+# define TX_JAB_TIMEOUT (1 << 1)
+# define TX_NO_CARRIER (1 << 2)
+# define TX_LOSS_CARRIER (1 << 3)
+# define TX_EXC_DEF (1 << 4)
+# define TX_LATE_COLL_ABORT (1 << 5)
+# define TX_EXC_COLL (1 << 6)
+# define TX_UNDERRUN (1 << 7)
+# define TX_DEFERRED (1 << 8)
+# define TX_LATE_COLL (1 << 9)
+# define TX_COLL_CNT_MASK (0xF << 10)
+# define TX_PKT_RETRY (1 << 31)
+#define MAC_TX_BUFF0_ADDR 0x4
+# define TX_DMA_ENABLE (1 << 0)
+# define TX_T_DONE (1 << 1)
+# define TX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3)
+#define MAC_TX_BUFF0_LEN 0x8
+#define MAC_TX_BUFF1_STATUS 0x10
+#define MAC_TX_BUFF1_ADDR 0x14
+#define MAC_TX_BUFF1_LEN 0x18
+#define MAC_TX_BUFF2_STATUS 0x20
+#define MAC_TX_BUFF2_ADDR 0x24
+#define MAC_TX_BUFF2_LEN 0x28
+#define MAC_TX_BUFF3_STATUS 0x30
+#define MAC_TX_BUFF3_ADDR 0x34
+#define MAC_TX_BUFF3_LEN 0x38
-#define MAC0_RX_DMA_ADDR 0xB4004100
-#define MAC1_RX_DMA_ADDR 0xB4004300
+#define MAC0_RX_DMA_ADDR 0xB4004100
+#define MAC1_RX_DMA_ADDR 0xB4004300
/* offsets from MAC_RX_RING_ADDR */
-#define MAC_RX_BUFF0_STATUS 0x0
-# define RX_FRAME_LEN_MASK 0x3fff
-# define RX_WDOG_TIMER (1<<14)
-# define RX_RUNT (1<<15)
-# define RX_OVERLEN (1<<16)
-# define RX_COLL (1<<17)
-# define RX_ETHER (1<<18)
-# define RX_MII_ERROR (1<<19)
-# define RX_DRIBBLING (1<<20)
-# define RX_CRC_ERROR (1<<21)
-# define RX_VLAN1 (1<<22)
-# define RX_VLAN2 (1<<23)
-# define RX_LEN_ERROR (1<<24)
-# define RX_CNTRL_FRAME (1<<25)
-# define RX_U_CNTRL_FRAME (1<<26)
-# define RX_MCAST_FRAME (1<<27)
-# define RX_BCAST_FRAME (1<<28)
-# define RX_FILTER_FAIL (1<<29)
-# define RX_PACKET_FILTER (1<<30)
-# define RX_MISSED_FRAME (1<<31)
+#define MAC_RX_BUFF0_STATUS 0x0
+# define RX_FRAME_LEN_MASK 0x3fff
+# define RX_WDOG_TIMER (1 << 14)
+# define RX_RUNT (1 << 15)
+# define RX_OVERLEN (1 << 16)
+# define RX_COLL (1 << 17)
+# define RX_ETHER (1 << 18)
+# define RX_MII_ERROR (1 << 19)
+# define RX_DRIBBLING (1 << 20)
+# define RX_CRC_ERROR (1 << 21)
+# define RX_VLAN1 (1 << 22)
+# define RX_VLAN2 (1 << 23)
+# define RX_LEN_ERROR (1 << 24)
+# define RX_CNTRL_FRAME (1 << 25)
+# define RX_U_CNTRL_FRAME (1 << 26)
+# define RX_MCAST_FRAME (1 << 27)
+# define RX_BCAST_FRAME (1 << 28)
+# define RX_FILTER_FAIL (1 << 29)
+# define RX_PACKET_FILTER (1 << 30)
+# define RX_MISSED_FRAME (1 << 31)
# define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN | \
- RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \
- RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME)
-#define MAC_RX_BUFF0_ADDR 0x4
-# define RX_DMA_ENABLE (1<<0)
-# define RX_T_DONE (1<<1)
-# define RX_GET_DMA_BUFFER(X) (((X)>>2)&0x3)
-# define RX_SET_BUFF_ADDR(X) ((X)&0xffffffc0)
-#define MAC_RX_BUFF1_STATUS 0x10
-#define MAC_RX_BUFF1_ADDR 0x14
-#define MAC_RX_BUFF2_STATUS 0x20
-#define MAC_RX_BUFF2_ADDR 0x24
-#define MAC_RX_BUFF3_STATUS 0x30
-#define MAC_RX_BUFF3_ADDR 0x34
-
+ RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \
+ RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME)
+#define MAC_RX_BUFF0_ADDR 0x4
+# define RX_DMA_ENABLE (1 << 0)
+# define RX_T_DONE (1 << 1)
+# define RX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3)
+# define RX_SET_BUFF_ADDR(X) ((X) & 0xffffffc0)
+#define MAC_RX_BUFF1_STATUS 0x10
+#define MAC_RX_BUFF1_ADDR 0x14
+#define MAC_RX_BUFF2_STATUS 0x20
+#define MAC_RX_BUFF2_ADDR 0x24
+#define MAC_RX_BUFF3_STATUS 0x30
+#define MAC_RX_BUFF3_ADDR 0x34
/* UARTS 0-3 */
-#define UART_BASE UART0_ADDR
+#define UART_BASE UART0_ADDR
#ifdef CONFIG_SOC_AU1200
-#define UART_DEBUG_BASE UART1_ADDR
+#define UART_DEBUG_BASE UART1_ADDR
#else
-#define UART_DEBUG_BASE UART3_ADDR
+#define UART_DEBUG_BASE UART3_ADDR
#endif
#define UART_RX 0 /* Receive buffer */
@@ -1294,341 +1293,337 @@
#define UART_MSR_DCTS 0x01 /* Delta CTS */
#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
-
-
/* SSIO */
-#define SSI0_STATUS 0xB1600000
-# define SSI_STATUS_BF (1<<4)
-# define SSI_STATUS_OF (1<<3)
-# define SSI_STATUS_UF (1<<2)
-# define SSI_STATUS_D (1<<1)
-# define SSI_STATUS_B (1<<0)
-#define SSI0_INT 0xB1600004
-# define SSI_INT_OI (1<<3)
-# define SSI_INT_UI (1<<2)
-# define SSI_INT_DI (1<<1)
-#define SSI0_INT_ENABLE 0xB1600008
-# define SSI_INTE_OIE (1<<3)
-# define SSI_INTE_UIE (1<<2)
-# define SSI_INTE_DIE (1<<1)
-#define SSI0_CONFIG 0xB1600020
-# define SSI_CONFIG_AO (1<<24)
-# define SSI_CONFIG_DO (1<<23)
-# define SSI_CONFIG_ALEN_BIT 20
-# define SSI_CONFIG_ALEN_MASK (0x7<<20)
-# define SSI_CONFIG_DLEN_BIT 16
-# define SSI_CONFIG_DLEN_MASK (0x7<<16)
-# define SSI_CONFIG_DD (1<<11)
-# define SSI_CONFIG_AD (1<<10)
-# define SSI_CONFIG_BM_BIT 8
-# define SSI_CONFIG_BM_MASK (0x3<<8)
-# define SSI_CONFIG_CE (1<<7)
-# define SSI_CONFIG_DP (1<<6)
-# define SSI_CONFIG_DL (1<<5)
-# define SSI_CONFIG_EP (1<<4)
-#define SSI0_ADATA 0xB1600024
-# define SSI_AD_D (1<<24)
-# define SSI_AD_ADDR_BIT 16
-# define SSI_AD_ADDR_MASK (0xff<<16)
-# define SSI_AD_DATA_BIT 0
-# define SSI_AD_DATA_MASK (0xfff<<0)
-#define SSI0_CLKDIV 0xB1600028
-#define SSI0_CONTROL 0xB1600100
-# define SSI_CONTROL_CD (1<<1)
-# define SSI_CONTROL_E (1<<0)
+#define SSI0_STATUS 0xB1600000
+# define SSI_STATUS_BF (1 << 4)
+# define SSI_STATUS_OF (1 << 3)
+# define SSI_STATUS_UF (1 << 2)
+# define SSI_STATUS_D (1 << 1)
+# define SSI_STATUS_B (1 << 0)
+#define SSI0_INT 0xB1600004
+# define SSI_INT_OI (1 << 3)
+# define SSI_INT_UI (1 << 2)
+# define SSI_INT_DI (1 << 1)
+#define SSI0_INT_ENABLE 0xB1600008
+# define SSI_INTE_OIE (1 << 3)
+# define SSI_INTE_UIE (1 << 2)
+# define SSI_INTE_DIE (1 << 1)
+#define SSI0_CONFIG 0xB1600020
+# define SSI_CONFIG_AO (1 << 24)
+# define SSI_CONFIG_DO (1 << 23)
+# define SSI_CONFIG_ALEN_BIT 20
+# define SSI_CONFIG_ALEN_MASK (0x7 << 20)
+# define SSI_CONFIG_DLEN_BIT 16
+# define SSI_CONFIG_DLEN_MASK (0x7 << 16)
+# define SSI_CONFIG_DD (1 << 11)
+# define SSI_CONFIG_AD (1 << 10)
+# define SSI_CONFIG_BM_BIT 8
+# define SSI_CONFIG_BM_MASK (0x3 << 8)
+# define SSI_CONFIG_CE (1 << 7)
+# define SSI_CONFIG_DP (1 << 6)
+# define SSI_CONFIG_DL (1 << 5)
+# define SSI_CONFIG_EP (1 << 4)
+#define SSI0_ADATA 0xB1600024
+# define SSI_AD_D (1 << 24)
+# define SSI_AD_ADDR_BIT 16
+# define SSI_AD_ADDR_MASK (0xff << 16)
+# define SSI_AD_DATA_BIT 0
+# define SSI_AD_DATA_MASK (0xfff << 0)
+#define SSI0_CLKDIV 0xB1600028
+#define SSI0_CONTROL 0xB1600100
+# define SSI_CONTROL_CD (1 << 1)
+# define SSI_CONTROL_E (1 << 0)
/* SSI1 */
-#define SSI1_STATUS 0xB1680000
-#define SSI1_INT 0xB1680004
-#define SSI1_INT_ENABLE 0xB1680008
-#define SSI1_CONFIG 0xB1680020
-#define SSI1_ADATA 0xB1680024
-#define SSI1_CLKDIV 0xB1680028
-#define SSI1_ENABLE 0xB1680100
+#define SSI1_STATUS 0xB1680000
+#define SSI1_INT 0xB1680004
+#define SSI1_INT_ENABLE 0xB1680008
+#define SSI1_CONFIG 0xB1680020
+#define SSI1_ADATA 0xB1680024
+#define SSI1_CLKDIV 0xB1680028
+#define SSI1_ENABLE 0xB1680100
/*
* Register content definitions
*/
-#define SSI_STATUS_BF (1<<4)
-#define SSI_STATUS_OF (1<<3)
-#define SSI_STATUS_UF (1<<2)
-#define SSI_STATUS_D (1<<1)
-#define SSI_STATUS_B (1<<0)
+#define SSI_STATUS_BF (1 << 4)
+#define SSI_STATUS_OF (1 << 3)
+#define SSI_STATUS_UF (1 << 2)
+#define SSI_STATUS_D (1 << 1)
+#define SSI_STATUS_B (1 << 0)
/* SSI_INT */
-#define SSI_INT_OI (1<<3)
-#define SSI_INT_UI (1<<2)
-#define SSI_INT_DI (1<<1)
+#define SSI_INT_OI (1 << 3)
+#define SSI_INT_UI (1 << 2)
+#define SSI_INT_DI (1 << 1)
/* SSI_INTEN */
-#define SSI_INTEN_OIE (1<<3)
-#define SSI_INTEN_UIE (1<<2)
-#define SSI_INTEN_DIE (1<<1)
+#define SSI_INTEN_OIE (1 << 3)
+#define SSI_INTEN_UIE (1 << 2)
+#define SSI_INTEN_DIE (1 << 1)
-#define SSI_CONFIG_AO (1<<24)
-#define SSI_CONFIG_DO (1<<23)
-#define SSI_CONFIG_ALEN (7<<20)
-#define SSI_CONFIG_DLEN (15<<16)
-#define SSI_CONFIG_DD (1<<11)
-#define SSI_CONFIG_AD (1<<10)
-#define SSI_CONFIG_BM (3<<8)
-#define SSI_CONFIG_CE (1<<7)
-#define SSI_CONFIG_DP (1<<6)
-#define SSI_CONFIG_DL (1<<5)
-#define SSI_CONFIG_EP (1<<4)
-#define SSI_CONFIG_ALEN_N(N) ((N-1)<<20)
-#define SSI_CONFIG_DLEN_N(N) ((N-1)<<16)
-#define SSI_CONFIG_BM_HI (0<<8)
-#define SSI_CONFIG_BM_LO (1<<8)
-#define SSI_CONFIG_BM_CY (2<<8)
+#define SSI_CONFIG_AO (1 << 24)
+#define SSI_CONFIG_DO (1 << 23)
+#define SSI_CONFIG_ALEN (7 << 20)
+#define SSI_CONFIG_DLEN (15 << 16)
+#define SSI_CONFIG_DD (1 << 11)
+#define SSI_CONFIG_AD (1 << 10)
+#define SSI_CONFIG_BM (3 << 8)
+#define SSI_CONFIG_CE (1 << 7)
+#define SSI_CONFIG_DP (1 << 6)
+#define SSI_CONFIG_DL (1 << 5)
+#define SSI_CONFIG_EP (1 << 4)
+#define SSI_CONFIG_ALEN_N(N) ((N-1) << 20)
+#define SSI_CONFIG_DLEN_N(N) ((N-1) << 16)
+#define SSI_CONFIG_BM_HI (0 << 8)
+#define SSI_CONFIG_BM_LO (1 << 8)
+#define SSI_CONFIG_BM_CY (2 << 8)
-#define SSI_ADATA_D (1<<24)
-#define SSI_ADATA_ADDR (0xFF<<16)
-#define SSI_ADATA_DATA (0x0FFF)
-#define SSI_ADATA_ADDR_N(N) (N<<16)
+#define SSI_ADATA_D (1 << 24)
+#define SSI_ADATA_ADDR (0xFF << 16)
+#define SSI_ADATA_DATA 0x0FFF
+#define SSI_ADATA_ADDR_N(N) (N << 16)
-#define SSI_ENABLE_CD (1<<1)
-#define SSI_ENABLE_E (1<<0)
-
+#define SSI_ENABLE_CD (1 << 1)
+#define SSI_ENABLE_E (1 << 0)
/* IrDA Controller */
-#define IRDA_BASE 0xB0300000
-#define IR_RING_PTR_STATUS (IRDA_BASE+0x00)
-#define IR_RING_BASE_ADDR_H (IRDA_BASE+0x04)
-#define IR_RING_BASE_ADDR_L (IRDA_BASE+0x08)
-#define IR_RING_SIZE (IRDA_BASE+0x0C)
-#define IR_RING_PROMPT (IRDA_BASE+0x10)
-#define IR_RING_ADDR_CMPR (IRDA_BASE+0x14)
-#define IR_INT_CLEAR (IRDA_BASE+0x18)
-#define IR_CONFIG_1 (IRDA_BASE+0x20)
-# define IR_RX_INVERT_LED (1<<0)
-# define IR_TX_INVERT_LED (1<<1)
-# define IR_ST (1<<2)
-# define IR_SF (1<<3)
-# define IR_SIR (1<<4)
-# define IR_MIR (1<<5)
-# define IR_FIR (1<<6)
-# define IR_16CRC (1<<7)
-# define IR_TD (1<<8)
-# define IR_RX_ALL (1<<9)
-# define IR_DMA_ENABLE (1<<10)
-# define IR_RX_ENABLE (1<<11)
-# define IR_TX_ENABLE (1<<12)
-# define IR_LOOPBACK (1<<14)
-# define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \
- IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC)
-#define IR_SIR_FLAGS (IRDA_BASE+0x24)
-#define IR_ENABLE (IRDA_BASE+0x28)
-# define IR_RX_STATUS (1<<9)
-# define IR_TX_STATUS (1<<10)
-#define IR_READ_PHY_CONFIG (IRDA_BASE+0x2C)
-#define IR_WRITE_PHY_CONFIG (IRDA_BASE+0x30)
-#define IR_MAX_PKT_LEN (IRDA_BASE+0x34)
-#define IR_RX_BYTE_CNT (IRDA_BASE+0x38)
-#define IR_CONFIG_2 (IRDA_BASE+0x3C)
-# define IR_MODE_INV (1<<0)
-# define IR_ONE_PIN (1<<1)
-#define IR_INTERFACE_CONFIG (IRDA_BASE+0x40)
+#define IRDA_BASE 0xB0300000
+#define IR_RING_PTR_STATUS (IRDA_BASE + 0x00)
+#define IR_RING_BASE_ADDR_H (IRDA_BASE + 0x04)
+#define IR_RING_BASE_ADDR_L (IRDA_BASE + 0x08)
+#define IR_RING_SIZE (IRDA_BASE + 0x0C)
+#define IR_RING_PROMPT (IRDA_BASE + 0x10)
+#define IR_RING_ADDR_CMPR (IRDA_BASE + 0x14)
+#define IR_INT_CLEAR (IRDA_BASE + 0x18)
+#define IR_CONFIG_1 (IRDA_BASE + 0x20)
+# define IR_RX_INVERT_LED (1 << 0)
+# define IR_TX_INVERT_LED (1 << 1)
+# define IR_ST (1 << 2)
+# define IR_SF (1 << 3)
+# define IR_SIR (1 << 4)
+# define IR_MIR (1 << 5)
+# define IR_FIR (1 << 6)
+# define IR_16CRC (1 << 7)
+# define IR_TD (1 << 8)
+# define IR_RX_ALL (1 << 9)
+# define IR_DMA_ENABLE (1 << 10)
+# define IR_RX_ENABLE (1 << 11)
+# define IR_TX_ENABLE (1 << 12)
+# define IR_LOOPBACK (1 << 14)
+# define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \
+ IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC)
+#define IR_SIR_FLAGS (IRDA_BASE + 0x24)
+#define IR_ENABLE (IRDA_BASE + 0x28)
+# define IR_RX_STATUS (1 << 9)
+# define IR_TX_STATUS (1 << 10)
+#define IR_READ_PHY_CONFIG (IRDA_BASE + 0x2C)
+#define IR_WRITE_PHY_CONFIG (IRDA_BASE + 0x30)
+#define IR_MAX_PKT_LEN (IRDA_BASE + 0x34)
+#define IR_RX_BYTE_CNT (IRDA_BASE + 0x38)
+#define IR_CONFIG_2 (IRDA_BASE + 0x3C)
+# define IR_MODE_INV (1 << 0)
+# define IR_ONE_PIN (1 << 1)
+#define IR_INTERFACE_CONFIG (IRDA_BASE + 0x40)
/* GPIO */
-#define SYS_PINFUNC 0xB190002C
-# define SYS_PF_USB (1<<15) /* 2nd USB device/host */
-# define SYS_PF_U3 (1<<14) /* GPIO23/U3TXD */
-# define SYS_PF_U2 (1<<13) /* GPIO22/U2TXD */
-# define SYS_PF_U1 (1<<12) /* GPIO21/U1TXD */
-# define SYS_PF_SRC (1<<11) /* GPIO6/SROMCKE */
-# define SYS_PF_CK5 (1<<10) /* GPIO3/CLK5 */
-# define SYS_PF_CK4 (1<<9) /* GPIO2/CLK4 */
-# define SYS_PF_IRF (1<<8) /* GPIO15/IRFIRSEL */
-# define SYS_PF_UR3 (1<<7) /* GPIO[14:9]/UART3 */
-# define SYS_PF_I2D (1<<6) /* GPIO8/I2SDI */
-# define SYS_PF_I2S (1<<5) /* I2S/GPIO[29:31] */
-# define SYS_PF_NI2 (1<<4) /* NI2/GPIO[24:28] */
-# define SYS_PF_U0 (1<<3) /* U0TXD/GPIO20 */
-# define SYS_PF_RD (1<<2) /* IRTXD/GPIO19 */
-# define SYS_PF_A97 (1<<1) /* AC97/SSL1 */
-# define SYS_PF_S0 (1<<0) /* SSI_0/GPIO[16:18] */
+#define SYS_PINFUNC 0xB190002C
+# define SYS_PF_USB (1 << 15) /* 2nd USB device/host */
+# define SYS_PF_U3 (1 << 14) /* GPIO23/U3TXD */
+# define SYS_PF_U2 (1 << 13) /* GPIO22/U2TXD */
+# define SYS_PF_U1 (1 << 12) /* GPIO21/U1TXD */
+# define SYS_PF_SRC (1 << 11) /* GPIO6/SROMCKE */
+# define SYS_PF_CK5 (1 << 10) /* GPIO3/CLK5 */
+# define SYS_PF_CK4 (1 << 9) /* GPIO2/CLK4 */
+# define SYS_PF_IRF (1 << 8) /* GPIO15/IRFIRSEL */
+# define SYS_PF_UR3 (1 << 7) /* GPIO[14:9]/UART3 */
+# define SYS_PF_I2D (1 << 6) /* GPIO8/I2SDI */
+# define SYS_PF_I2S (1 << 5) /* I2S/GPIO[29:31] */
+# define SYS_PF_NI2 (1 << 4) /* NI2/GPIO[24:28] */
+# define SYS_PF_U0 (1 << 3) /* U0TXD/GPIO20 */
+# define SYS_PF_RD (1 << 2) /* IRTXD/GPIO19 */
+# define SYS_PF_A97 (1 << 1) /* AC97/SSL1 */
+# define SYS_PF_S0 (1 << 0) /* SSI_0/GPIO[16:18] */
-/* Au1100 Only */
-# define SYS_PF_PC (1<<18) /* PCMCIA/GPIO[207:204] */
-# define SYS_PF_LCD (1<<17) /* extern lcd/GPIO[203:200] */
-# define SYS_PF_CS (1<<16) /* EXTCLK0/32khz to gpio2 */
-# define SYS_PF_EX0 (1<<9) /* gpio2/clock */
+/* Au1100 only */
+# define SYS_PF_PC (1 << 18) /* PCMCIA/GPIO[207:204] */
+# define SYS_PF_LCD (1 << 17) /* extern lcd/GPIO[203:200] */
+# define SYS_PF_CS (1 << 16) /* EXTCLK0/32KHz to gpio2 */
+# define SYS_PF_EX0 (1 << 9) /* GPIO2/clock */
-/* Au1550 Only. Redefines lots of pins */
-# define SYS_PF_PSC2_MASK (7 << 17)
-# define SYS_PF_PSC2_AC97 (0)
-# define SYS_PF_PSC2_SPI (0)
-# define SYS_PF_PSC2_I2S (1 << 17)
-# define SYS_PF_PSC2_SMBUS (3 << 17)
-# define SYS_PF_PSC2_GPIO (7 << 17)
-# define SYS_PF_PSC3_MASK (7 << 20)
-# define SYS_PF_PSC3_AC97 (0)
-# define SYS_PF_PSC3_SPI (0)
-# define SYS_PF_PSC3_I2S (1 << 20)
-# define SYS_PF_PSC3_SMBUS (3 << 20)
-# define SYS_PF_PSC3_GPIO (7 << 20)
-# define SYS_PF_PSC1_S1 (1 << 1)
-# define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2))
+/* Au1550 only. Redefines lots of pins */
+# define SYS_PF_PSC2_MASK (7 << 17)
+# define SYS_PF_PSC2_AC97 0
+# define SYS_PF_PSC2_SPI 0
+# define SYS_PF_PSC2_I2S (1 << 17)
+# define SYS_PF_PSC2_SMBUS (3 << 17)
+# define SYS_PF_PSC2_GPIO (7 << 17)
+# define SYS_PF_PSC3_MASK (7 << 20)
+# define SYS_PF_PSC3_AC97 0
+# define SYS_PF_PSC3_SPI 0
+# define SYS_PF_PSC3_I2S (1 << 20)
+# define SYS_PF_PSC3_SMBUS (3 << 20)
+# define SYS_PF_PSC3_GPIO (7 << 20)
+# define SYS_PF_PSC1_S1 (1 << 1)
+# define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2))
-/* Au1200 Only */
+/* Au1200 only */
#ifdef CONFIG_SOC_AU1200
-#define SYS_PINFUNC_DMA (1<<31)
-#define SYS_PINFUNC_S0A (1<<30)
-#define SYS_PINFUNC_S1A (1<<29)
-#define SYS_PINFUNC_LP0 (1<<28)
-#define SYS_PINFUNC_LP1 (1<<27)
-#define SYS_PINFUNC_LD16 (1<<26)
-#define SYS_PINFUNC_LD8 (1<<25)
-#define SYS_PINFUNC_LD1 (1<<24)
-#define SYS_PINFUNC_LD0 (1<<23)
-#define SYS_PINFUNC_P1A (3<<21)
-#define SYS_PINFUNC_P1B (1<<20)
-#define SYS_PINFUNC_FS3 (1<<19)
-#define SYS_PINFUNC_P0A (3<<17)
-#define SYS_PINFUNC_CS (1<<16)
-#define SYS_PINFUNC_CIM (1<<15)
-#define SYS_PINFUNC_P1C (1<<14)
-#define SYS_PINFUNC_U1T (1<<12)
-#define SYS_PINFUNC_U1R (1<<11)
-#define SYS_PINFUNC_EX1 (1<<10)
-#define SYS_PINFUNC_EX0 (1<<9)
-#define SYS_PINFUNC_U0R (1<<8)
-#define SYS_PINFUNC_MC (1<<7)
-#define SYS_PINFUNC_S0B (1<<6)
-#define SYS_PINFUNC_S0C (1<<5)
-#define SYS_PINFUNC_P0B (1<<4)
-#define SYS_PINFUNC_U0T (1<<3)
-#define SYS_PINFUNC_S1B (1<<2)
+#define SYS_PINFUNC_DMA (1 << 31)
+#define SYS_PINFUNC_S0A (1 << 30)
+#define SYS_PINFUNC_S1A (1 << 29)
+#define SYS_PINFUNC_LP0 (1 << 28)
+#define SYS_PINFUNC_LP1 (1 << 27)
+#define SYS_PINFUNC_LD16 (1 << 26)
+#define SYS_PINFUNC_LD8 (1 << 25)
+#define SYS_PINFUNC_LD1 (1 << 24)
+#define SYS_PINFUNC_LD0 (1 << 23)
+#define SYS_PINFUNC_P1A (3 << 21)
+#define SYS_PINFUNC_P1B (1 << 20)
+#define SYS_PINFUNC_FS3 (1 << 19)
+#define SYS_PINFUNC_P0A (3 << 17)
+#define SYS_PINFUNC_CS (1 << 16)
+#define SYS_PINFUNC_CIM (1 << 15)
+#define SYS_PINFUNC_P1C (1 << 14)
+#define SYS_PINFUNC_U1T (1 << 12)
+#define SYS_PINFUNC_U1R (1 << 11)
+#define SYS_PINFUNC_EX1 (1 << 10)
+#define SYS_PINFUNC_EX0 (1 << 9)
+#define SYS_PINFUNC_U0R (1 << 8)
+#define SYS_PINFUNC_MC (1 << 7)
+#define SYS_PINFUNC_S0B (1 << 6)
+#define SYS_PINFUNC_S0C (1 << 5)
+#define SYS_PINFUNC_P0B (1 << 4)
+#define SYS_PINFUNC_U0T (1 << 3)
+#define SYS_PINFUNC_S1B (1 << 2)
#endif
-#define SYS_TRIOUTRD 0xB1900100
-#define SYS_TRIOUTCLR 0xB1900100
-#define SYS_OUTPUTRD 0xB1900108
-#define SYS_OUTPUTSET 0xB1900108
-#define SYS_OUTPUTCLR 0xB190010C
-#define SYS_PINSTATERD 0xB1900110
-#define SYS_PININPUTEN 0xB1900110
+#define SYS_TRIOUTRD 0xB1900100
+#define SYS_TRIOUTCLR 0xB1900100
+#define SYS_OUTPUTRD 0xB1900108
+#define SYS_OUTPUTSET 0xB1900108
+#define SYS_OUTPUTCLR 0xB190010C
+#define SYS_PINSTATERD 0xB1900110
+#define SYS_PININPUTEN 0xB1900110
/* GPIO2, Au1500, Au1550 only */
-#define GPIO2_BASE 0xB1700000
-#define GPIO2_DIR (GPIO2_BASE + 0)
-#define GPIO2_OUTPUT (GPIO2_BASE + 8)
-#define GPIO2_PINSTATE (GPIO2_BASE + 0xC)
-#define GPIO2_INTENABLE (GPIO2_BASE + 0x10)
-#define GPIO2_ENABLE (GPIO2_BASE + 0x14)
+#define GPIO2_BASE 0xB1700000
+#define GPIO2_DIR (GPIO2_BASE + 0)
+#define GPIO2_OUTPUT (GPIO2_BASE + 8)
+#define GPIO2_PINSTATE (GPIO2_BASE + 0xC)
+#define GPIO2_INTENABLE (GPIO2_BASE + 0x10)
+#define GPIO2_ENABLE (GPIO2_BASE + 0x14)
/* Power Management */
-#define SYS_SCRATCH0 0xB1900018
-#define SYS_SCRATCH1 0xB190001C
-#define SYS_WAKEMSK 0xB1900034
-#define SYS_ENDIAN 0xB1900038
-#define SYS_POWERCTRL 0xB190003C
-#define SYS_WAKESRC 0xB190005C
-#define SYS_SLPPWR 0xB1900078
-#define SYS_SLEEP 0xB190007C
+#define SYS_SCRATCH0 0xB1900018
+#define SYS_SCRATCH1 0xB190001C
+#define SYS_WAKEMSK 0xB1900034
+#define SYS_ENDIAN 0xB1900038
+#define SYS_POWERCTRL 0xB190003C
+#define SYS_WAKESRC 0xB190005C
+#define SYS_SLPPWR 0xB1900078
+#define SYS_SLEEP 0xB190007C
/* Clock Controller */
-#define SYS_FREQCTRL0 0xB1900020
-# define SYS_FC_FRDIV2_BIT 22
-# define SYS_FC_FRDIV2_MASK (0xff << SYS_FC_FRDIV2_BIT)
-# define SYS_FC_FE2 (1<<21)
-# define SYS_FC_FS2 (1<<20)
-# define SYS_FC_FRDIV1_BIT 12
-# define SYS_FC_FRDIV1_MASK (0xff << SYS_FC_FRDIV1_BIT)
-# define SYS_FC_FE1 (1<<11)
-# define SYS_FC_FS1 (1<<10)
-# define SYS_FC_FRDIV0_BIT 2
-# define SYS_FC_FRDIV0_MASK (0xff << SYS_FC_FRDIV0_BIT)
-# define SYS_FC_FE0 (1<<1)
-# define SYS_FC_FS0 (1<<0)
-#define SYS_FREQCTRL1 0xB1900024
-# define SYS_FC_FRDIV5_BIT 22
-# define SYS_FC_FRDIV5_MASK (0xff << SYS_FC_FRDIV5_BIT)
-# define SYS_FC_FE5 (1<<21)
-# define SYS_FC_FS5 (1<<20)
-# define SYS_FC_FRDIV4_BIT 12
-# define SYS_FC_FRDIV4_MASK (0xff << SYS_FC_FRDIV4_BIT)
-# define SYS_FC_FE4 (1<<11)
-# define SYS_FC_FS4 (1<<10)
-# define SYS_FC_FRDIV3_BIT 2
-# define SYS_FC_FRDIV3_MASK (0xff << SYS_FC_FRDIV3_BIT)
-# define SYS_FC_FE3 (1<<1)
-# define SYS_FC_FS3 (1<<0)
-#define SYS_CLKSRC 0xB1900028
-# define SYS_CS_ME1_BIT 27
-# define SYS_CS_ME1_MASK (0x7<<SYS_CS_ME1_BIT)
-# define SYS_CS_DE1 (1<<26)
-# define SYS_CS_CE1 (1<<25)
-# define SYS_CS_ME0_BIT 22
-# define SYS_CS_ME0_MASK (0x7<<SYS_CS_ME0_BIT)
-# define SYS_CS_DE0 (1<<21)
-# define SYS_CS_CE0 (1<<20)
-# define SYS_CS_MI2_BIT 17
-# define SYS_CS_MI2_MASK (0x7<<SYS_CS_MI2_BIT)
-# define SYS_CS_DI2 (1<<16)
-# define SYS_CS_CI2 (1<<15)
+#define SYS_FREQCTRL0 0xB1900020
+# define SYS_FC_FRDIV2_BIT 22
+# define SYS_FC_FRDIV2_MASK (0xff << SYS_FC_FRDIV2_BIT)
+# define SYS_FC_FE2 (1 << 21)
+# define SYS_FC_FS2 (1 << 20)
+# define SYS_FC_FRDIV1_BIT 12
+# define SYS_FC_FRDIV1_MASK (0xff << SYS_FC_FRDIV1_BIT)
+# define SYS_FC_FE1 (1 << 11)
+# define SYS_FC_FS1 (1 << 10)
+# define SYS_FC_FRDIV0_BIT 2
+# define SYS_FC_FRDIV0_MASK (0xff << SYS_FC_FRDIV0_BIT)
+# define SYS_FC_FE0 (1 << 1)
+# define SYS_FC_FS0 (1 << 0)
+#define SYS_FREQCTRL1 0xB1900024
+# define SYS_FC_FRDIV5_BIT 22
+# define SYS_FC_FRDIV5_MASK (0xff << SYS_FC_FRDIV5_BIT)
+# define SYS_FC_FE5 (1 << 21)
+# define SYS_FC_FS5 (1 << 20)
+# define SYS_FC_FRDIV4_BIT 12
+# define SYS_FC_FRDIV4_MASK (0xff << SYS_FC_FRDIV4_BIT)
+# define SYS_FC_FE4 (1 << 11)
+# define SYS_FC_FS4 (1 << 10)
+# define SYS_FC_FRDIV3_BIT 2
+# define SYS_FC_FRDIV3_MASK (0xff << SYS_FC_FRDIV3_BIT)
+# define SYS_FC_FE3 (1 << 1)
+# define SYS_FC_FS3 (1 << 0)
+#define SYS_CLKSRC 0xB1900028
+# define SYS_CS_ME1_BIT 27
+# define SYS_CS_ME1_MASK (0x7 << SYS_CS_ME1_BIT)
+# define SYS_CS_DE1 (1 << 26)
+# define SYS_CS_CE1 (1 << 25)
+# define SYS_CS_ME0_BIT 22
+# define SYS_CS_ME0_MASK (0x7 << SYS_CS_ME0_BIT)
+# define SYS_CS_DE0 (1 << 21)
+# define SYS_CS_CE0 (1 << 20)
+# define SYS_CS_MI2_BIT 17
+# define SYS_CS_MI2_MASK (0x7 << SYS_CS_MI2_BIT)
+# define SYS_CS_DI2 (1 << 16)
+# define SYS_CS_CI2 (1 << 15)
#ifdef CONFIG_SOC_AU1100
-# define SYS_CS_ML_BIT 7
-# define SYS_CS_ML_MASK (0x7<<SYS_CS_ML_BIT)
-# define SYS_CS_DL (1<<6)
-# define SYS_CS_CL (1<<5)
+# define SYS_CS_ML_BIT 7
+# define SYS_CS_ML_MASK (0x7 << SYS_CS_ML_BIT)
+# define SYS_CS_DL (1 << 6)
+# define SYS_CS_CL (1 << 5)
#else
-# define SYS_CS_MUH_BIT 12
-# define SYS_CS_MUH_MASK (0x7<<SYS_CS_MUH_BIT)
-# define SYS_CS_DUH (1<<11)
-# define SYS_CS_CUH (1<<10)
-# define SYS_CS_MUD_BIT 7
-# define SYS_CS_MUD_MASK (0x7<<SYS_CS_MUD_BIT)
-# define SYS_CS_DUD (1<<6)
-# define SYS_CS_CUD (1<<5)
+# define SYS_CS_MUH_BIT 12
+# define SYS_CS_MUH_MASK (0x7 << SYS_CS_MUH_BIT)
+# define SYS_CS_DUH (1 << 11)
+# define SYS_CS_CUH (1 << 10)
+# define SYS_CS_MUD_BIT 7
+# define SYS_CS_MUD_MASK (0x7 << SYS_CS_MUD_BIT)
+# define SYS_CS_DUD (1 << 6)
+# define SYS_CS_CUD (1 << 5)
#endif
-# define SYS_CS_MIR_BIT 2
-# define SYS_CS_MIR_MASK (0x7<<SYS_CS_MIR_BIT)
-# define SYS_CS_DIR (1<<1)
-# define SYS_CS_CIR (1<<0)
+# define SYS_CS_MIR_BIT 2
+# define SYS_CS_MIR_MASK (0x7 << SYS_CS_MIR_BIT)
+# define SYS_CS_DIR (1 << 1)
+# define SYS_CS_CIR (1 << 0)
-# define SYS_CS_MUX_AUX 0x1
-# define SYS_CS_MUX_FQ0 0x2
-# define SYS_CS_MUX_FQ1 0x3
-# define SYS_CS_MUX_FQ2 0x4
-# define SYS_CS_MUX_FQ3 0x5
-# define SYS_CS_MUX_FQ4 0x6
-# define SYS_CS_MUX_FQ5 0x7
-#define SYS_CPUPLL 0xB1900060
-#define SYS_AUXPLL 0xB1900064
+# define SYS_CS_MUX_AUX 0x1
+# define SYS_CS_MUX_FQ0 0x2
+# define SYS_CS_MUX_FQ1 0x3
+# define SYS_CS_MUX_FQ2 0x4
+# define SYS_CS_MUX_FQ3 0x5
+# define SYS_CS_MUX_FQ4 0x6
+# define SYS_CS_MUX_FQ5 0x7
+#define SYS_CPUPLL 0xB1900060
+#define SYS_AUXPLL 0xB1900064
/* AC97 Controller */
-#define AC97C_CONFIG 0xB0000000
-# define AC97C_RECV_SLOTS_BIT 13
+#define AC97C_CONFIG 0xB0000000
+# define AC97C_RECV_SLOTS_BIT 13
# define AC97C_RECV_SLOTS_MASK (0x3ff << AC97C_RECV_SLOTS_BIT)
-# define AC97C_XMIT_SLOTS_BIT 3
+# define AC97C_XMIT_SLOTS_BIT 3
# define AC97C_XMIT_SLOTS_MASK (0x3ff << AC97C_XMIT_SLOTS_BIT)
-# define AC97C_SG (1<<2)
-# define AC97C_SYNC (1<<1)
-# define AC97C_RESET (1<<0)
-#define AC97C_STATUS 0xB0000004
-# define AC97C_XU (1<<11)
-# define AC97C_XO (1<<10)
-# define AC97C_RU (1<<9)
-# define AC97C_RO (1<<8)
-# define AC97C_READY (1<<7)
-# define AC97C_CP (1<<6)
-# define AC97C_TR (1<<5)
-# define AC97C_TE (1<<4)
-# define AC97C_TF (1<<3)
-# define AC97C_RR (1<<2)
-# define AC97C_RE (1<<1)
-# define AC97C_RF (1<<0)
-#define AC97C_DATA 0xB0000008
-#define AC97C_CMD 0xB000000C
-# define AC97C_WD_BIT 16
-# define AC97C_READ (1<<7)
-# define AC97C_INDEX_MASK 0x7f
-#define AC97C_CNTRL 0xB0000010
-# define AC97C_RS (1<<1)
-# define AC97C_CE (1<<0)
-
+# define AC97C_SG (1 << 2)
+# define AC97C_SYNC (1 << 1)
+# define AC97C_RESET (1 << 0)
+#define AC97C_STATUS 0xB0000004
+# define AC97C_XU (1 << 11)
+# define AC97C_XO (1 << 10)
+# define AC97C_RU (1 << 9)
+# define AC97C_RO (1 << 8)
+# define AC97C_READY (1 << 7)
+# define AC97C_CP (1 << 6)
+# define AC97C_TR (1 << 5)
+# define AC97C_TE (1 << 4)
+# define AC97C_TF (1 << 3)
+# define AC97C_RR (1 << 2)
+# define AC97C_RE (1 << 1)
+# define AC97C_RF (1 << 0)
+#define AC97C_DATA 0xB0000008
+#define AC97C_CMD 0xB000000C
+# define AC97C_WD_BIT 16
+# define AC97C_READ (1 << 7)
+# define AC97C_INDEX_MASK 0x7f
+#define AC97C_CNTRL 0xB0000010
+# define AC97C_RS (1 << 1)
+# define AC97C_CE (1 << 0)
/* Secure Digital (SD) Controller */
#define SD0_XMIT_FIFO 0xB0600000
@@ -1638,73 +1633,74 @@
#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
/* Au1500 PCI Controller */
-#define Au1500_CFG_BASE 0xB4005000 // virtual, kseg0 addr
-#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0)
-#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4)
-# define PCI_ERROR ((1<<22) | (1<<23) | (1<<24) | (1<<25) | (1<<26) | (1<<27))
-#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8)
-#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC)
-#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10)
-#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14)
+#define Au1500_CFG_BASE 0xB4005000 /* virtual, KSEG1 addr */
+#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0)
+#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4)
+# define PCI_ERROR ((1 << 22) | (1 << 23) | (1 << 24) | \
+ (1 << 25) | (1 << 26) | (1 << 27))
+#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8)
+#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC)
+#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10)
+#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14)
#define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18)
-#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C)
-#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20)
-#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100)
-#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104)
-#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108)
-#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C)
-#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110)
+#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C)
+#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20)
+#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100)
+#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104)
+#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108)
+#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C)
+#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110)
-#define Au1500_PCI_HDR 0xB4005100 // virtual, kseg0 addr
+#define Au1500_PCI_HDR 0xB4005100 /* virtual, KSEG1 addr */
-/* All of our structures, like pci resource, have 32 bit members.
+/*
+ * All of our structures, like PCI resource, have 32-bit members.
* Drivers are expected to do an ioremap on the PCI MEM resource, but it's
- * hard to store 0x4 0000 0000 in a 32 bit type. We require a small patch
+ * hard to store 0x4 0000 0000 in a 32-bit type. We require a small patch
* to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and
- * (u32)Au1500_PCI_MEM_END and change those to the full 36 bit PCI MEM
- * addresses. For PCI IO, it's simpler because we get to do the ioremap
+ * (u32)Au1500_PCI_MEM_END and change those to the full 36-bit PCI MEM
+ * addresses. For PCI I/O, it's simpler because we get to do the ioremap
* ourselves and then adjust the device's resources.
*/
-#define Au1500_EXT_CFG 0x600000000ULL
-#define Au1500_EXT_CFG_TYPE1 0x680000000ULL
-#define Au1500_PCI_IO_START 0x500000000ULL
-#define Au1500_PCI_IO_END 0x5000FFFFFULL
-#define Au1500_PCI_MEM_START 0x440000000ULL
-#define Au1500_PCI_MEM_END 0x44FFFFFFFULL
+#define Au1500_EXT_CFG 0x600000000ULL
+#define Au1500_EXT_CFG_TYPE1 0x680000000ULL
+#define Au1500_PCI_IO_START 0x500000000ULL
+#define Au1500_PCI_IO_END 0x5000FFFFFULL
+#define Au1500_PCI_MEM_START 0x440000000ULL
+#define Au1500_PCI_MEM_END 0x44FFFFFFFULL
#define PCI_IO_START 0x00001000
#define PCI_IO_END 0x000FFFFF
#define PCI_MEM_START 0x40000000
#define PCI_MEM_END 0x4FFFFFFF
-#define PCI_FIRST_DEVFN (0<<3)
-#define PCI_LAST_DEVFN (19<<3)
+#define PCI_FIRST_DEVFN (0 << 3)
+#define PCI_LAST_DEVFN (19 << 3)
-#define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */
-#define IOPORT_RESOURCE_END 0xffffffff
-#define IOMEM_RESOURCE_START 0x10000000
-#define IOMEM_RESOURCE_END 0xffffffff
+#define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */
+#define IOPORT_RESOURCE_END 0xffffffff
+#define IOMEM_RESOURCE_START 0x10000000
+#define IOMEM_RESOURCE_END 0xffffffff
#else /* Au1000 and Au1100 and Au1200 */
-/* don't allow any legacy ports probing */
-#define IOPORT_RESOURCE_START 0x10000000
-#define IOPORT_RESOURCE_END 0xffffffff
-#define IOMEM_RESOURCE_START 0x10000000
-#define IOMEM_RESOURCE_END 0xffffffff
+/* Don't allow any legacy ports probing */
+#define IOPORT_RESOURCE_START 0x10000000
+#define IOPORT_RESOURCE_END 0xffffffff
+#define IOMEM_RESOURCE_START 0x10000000
+#define IOMEM_RESOURCE_END 0xffffffff
-#define PCI_IO_START 0
-#define PCI_IO_END 0
-#define PCI_MEM_START 0
-#define PCI_MEM_END 0
+#define PCI_IO_START 0
+#define PCI_IO_END 0
+#define PCI_MEM_START 0
+#define PCI_MEM_END 0
#define PCI_FIRST_DEVFN 0
-#define PCI_LAST_DEVFN 0
+#define PCI_LAST_DEVFN 0
#endif
#ifndef _LANGUAGE_ASSEMBLY
-typedef volatile struct
-{
+typedef volatile struct {
/* 0x0000 */ u32 toytrim;
/* 0x0004 */ u32 toywrite;
/* 0x0008 */ u32 toymatch0;
@@ -1746,13 +1742,14 @@
/* 0x010C */ u32 outputclr;
/* 0x0110 */ u32 pinstaterd;
#define pininputen pinstaterd
-
} AU1X00_SYS;
-static AU1X00_SYS* const sys = (AU1X00_SYS *)SYS_BASE;
+static AU1X00_SYS * const sys = (AU1X00_SYS *)SYS_BASE;
#endif
-/* Processor information base on prid.
+
+/*
+ * Processor information based on PRID.
* Copied from PowerPC.
*/
#ifndef _LANGUAGE_ASSEMBLY
@@ -1767,9 +1764,8 @@
unsigned char cpu_pll_wo; /* sys_cpupll reg. write-only */
};
-extern struct cpu_spec cpu_specs[];
-extern struct cpu_spec *cur_cpu_spec[];
+extern struct cpu_spec cpu_specs[];
+extern struct cpu_spec *cur_cpu_spec[];
#endif
#endif
-
diff --git a/include/asm-mips/mach-au1x00/au1000_dma.h b/include/asm-mips/mach-au1x00/au1000_dma.h
index 9f29520..c333b4e 100644
--- a/include/asm-mips/mach-au1x00/au1000_dma.h
+++ b/include/asm-mips/mach-au1x00/au1000_dma.h
@@ -1,11 +1,10 @@
/*
* BRIEF MODULE DESCRIPTION
- * Defines for using and allocating dma channels on the Alchemy
- * Au1000 mips processor.
+ * Defines for using and allocating DMA channels on the Alchemy
+ * Au1x00 MIPS processors.
*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * stevel@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -31,7 +30,7 @@
#ifndef __ASM_AU1000_DMA_H
#define __ASM_AU1000_DMA_H
-#include <asm/io.h> /* need byte IO */
+#include <linux/io.h> /* need byte IO */
#include <linux/spinlock.h> /* And spinlocks */
#include <linux/delay.h>
#include <asm/system.h>
@@ -50,36 +49,36 @@
#define DMA_DAH_MASK (0x0f << 20)
#define DMA_DID_BIT 16
#define DMA_DID_MASK (0x0f << DMA_DID_BIT)
-#define DMA_DS (1<<15)
-#define DMA_BE (1<<13)
-#define DMA_DR (1<<12)
-#define DMA_TS8 (1<<11)
+#define DMA_DS (1 << 15)
+#define DMA_BE (1 << 13)
+#define DMA_DR (1 << 12)
+#define DMA_TS8 (1 << 11)
#define DMA_DW_BIT 9
#define DMA_DW_MASK (0x03 << DMA_DW_BIT)
#define DMA_DW8 (0 << DMA_DW_BIT)
#define DMA_DW16 (1 << DMA_DW_BIT)
#define DMA_DW32 (2 << DMA_DW_BIT)
-#define DMA_NC (1<<8)
-#define DMA_IE (1<<7)
-#define DMA_HALT (1<<6)
-#define DMA_GO (1<<5)
-#define DMA_AB (1<<4)
-#define DMA_D1 (1<<3)
-#define DMA_BE1 (1<<2)
-#define DMA_D0 (1<<1)
-#define DMA_BE0 (1<<0)
+#define DMA_NC (1 << 8)
+#define DMA_IE (1 << 7)
+#define DMA_HALT (1 << 6)
+#define DMA_GO (1 << 5)
+#define DMA_AB (1 << 4)
+#define DMA_D1 (1 << 3)
+#define DMA_BE1 (1 << 2)
+#define DMA_D0 (1 << 1)
+#define DMA_BE0 (1 << 0)
-#define DMA_PERIPHERAL_ADDR 0x00000008
-#define DMA_BUFFER0_START 0x0000000C
-#define DMA_BUFFER1_START 0x00000014
-#define DMA_BUFFER0_COUNT 0x00000010
-#define DMA_BUFFER1_COUNT 0x00000018
-#define DMA_BAH_BIT 16
-#define DMA_BAH_MASK (0x0f << DMA_BAH_BIT)
-#define DMA_COUNT_BIT 0
-#define DMA_COUNT_MASK (0xffff << DMA_COUNT_BIT)
+#define DMA_PERIPHERAL_ADDR 0x00000008
+#define DMA_BUFFER0_START 0x0000000C
+#define DMA_BUFFER1_START 0x00000014
+#define DMA_BUFFER0_COUNT 0x00000010
+#define DMA_BUFFER1_COUNT 0x00000018
+#define DMA_BAH_BIT 16
+#define DMA_BAH_MASK (0x0f << DMA_BAH_BIT)
+#define DMA_COUNT_BIT 0
+#define DMA_COUNT_MASK (0xffff << DMA_COUNT_BIT)
-/* DMA Device ID's follow */
+/* DMA Device IDs follow */
enum {
DMA_ID_UART0_TX = 0,
DMA_ID_UART0_RX,
@@ -110,7 +109,8 @@
};
struct dma_chan {
- int dev_id; // this channel is allocated if >=0, free otherwise
+ int dev_id; /* this channel is allocated if >= 0, */
+ /* free otherwise */
unsigned int io;
const char *dev_str;
int irq;
@@ -132,23 +132,23 @@
extern void dump_au1000_dma_channel(unsigned int dmanr);
extern spinlock_t au1000_dma_spin_lock;
-
-static __inline__ struct dma_chan *get_dma_chan(unsigned int dmanr)
+static inline struct dma_chan *get_dma_chan(unsigned int dmanr)
{
- if (dmanr >= NUM_AU1000_DMA_CHANNELS
- || au1000_dma_table[dmanr].dev_id < 0)
+ if (dmanr >= NUM_AU1000_DMA_CHANNELS ||
+ au1000_dma_table[dmanr].dev_id < 0)
return NULL;
return &au1000_dma_table[dmanr];
}
-static __inline__ unsigned long claim_dma_lock(void)
+static inline unsigned long claim_dma_lock(void)
{
unsigned long flags;
+
spin_lock_irqsave(&au1000_dma_spin_lock, flags);
return flags;
}
-static __inline__ void release_dma_lock(unsigned long flags)
+static inline void release_dma_lock(unsigned long flags)
{
spin_unlock_irqrestore(&au1000_dma_spin_lock, flags);
}
@@ -156,48 +156,53 @@
/*
* Set the DMA buffer enable bits in the mode register.
*/
-static __inline__ void enable_dma_buffer0(unsigned int dmanr)
+static inline void enable_dma_buffer0(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
au_writel(DMA_BE0, chan->io + DMA_MODE_SET);
}
-static __inline__ void enable_dma_buffer1(unsigned int dmanr)
+
+static inline void enable_dma_buffer1(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
au_writel(DMA_BE1, chan->io + DMA_MODE_SET);
}
-static __inline__ void enable_dma_buffers(unsigned int dmanr)
+static inline void enable_dma_buffers(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
au_writel(DMA_BE0 | DMA_BE1, chan->io + DMA_MODE_SET);
}
-static __inline__ void start_dma(unsigned int dmanr)
+static inline void start_dma(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
-
au_writel(DMA_GO, chan->io + DMA_MODE_SET);
}
#define DMA_HALT_POLL 0x5000
-static __inline__ void halt_dma(unsigned int dmanr)
+static inline void halt_dma(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
int i;
+
if (!chan)
return;
-
au_writel(DMA_GO, chan->io + DMA_MODE_CLEAR);
- // poll the halt bit
+
+ /* Poll the halt bit */
for (i = 0; i < DMA_HALT_POLL; i++)
if (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT)
break;
@@ -205,55 +210,57 @@
printk(KERN_INFO "halt_dma: HALT poll expired!\n");
}
-
-static __inline__ void disable_dma(unsigned int dmanr)
+static inline void disable_dma(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
halt_dma(dmanr);
- // now we can disable the buffers
+ /* Now we can disable the buffers */
au_writel(~DMA_GO, chan->io + DMA_MODE_CLEAR);
}
-static __inline__ int dma_halted(unsigned int dmanr)
+static inline int dma_halted(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return 1;
return (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT) ? 1 : 0;
}
-/* initialize a DMA channel */
-static __inline__ void init_dma(unsigned int dmanr)
+/* Initialize a DMA channel. */
+static inline void init_dma(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
u32 mode;
+
if (!chan)
return;
disable_dma(dmanr);
- // set device FIFO address
- au_writel(CPHYSADDR(chan->fifo_addr),
- chan->io + DMA_PERIPHERAL_ADDR);
+ /* Set device FIFO address */
+ au_writel(CPHYSADDR(chan->fifo_addr), chan->io + DMA_PERIPHERAL_ADDR);
mode = chan->mode | (chan->dev_id << DMA_DID_BIT);
if (chan->irq)
mode |= DMA_IE;
au_writel(~mode, chan->io + DMA_MODE_CLEAR);
- au_writel(mode, chan->io + DMA_MODE_SET);
+ au_writel(mode, chan->io + DMA_MODE_SET);
}
/*
- * set mode for a specific DMA channel
+ * Set mode for a specific DMA channel
*/
-static __inline__ void set_dma_mode(unsigned int dmanr, unsigned int mode)
+static inline void set_dma_mode(unsigned int dmanr, unsigned int mode)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
/*
@@ -266,36 +273,37 @@
chan->mode |= mode;
}
-static __inline__ unsigned int get_dma_mode(unsigned int dmanr)
+static inline unsigned int get_dma_mode(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return 0;
return chan->mode;
}
-static __inline__ int get_dma_active_buffer(unsigned int dmanr)
+static inline int get_dma_active_buffer(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return -1;
return (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ? 1 : 0;
}
-
/*
- * set the device FIFO address for a specific DMA channel - only
+ * Set the device FIFO address for a specific DMA channel - only
* applicable to GPO4 and GPO5. All the other devices have fixed
* FIFO addresses.
*/
-static __inline__ void set_dma_fifo_addr(unsigned int dmanr,
- unsigned int a)
+static inline void set_dma_fifo_addr(unsigned int dmanr, unsigned int a)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
- if (chan->mode & DMA_DS) /* second bank of device ids */
+ if (chan->mode & DMA_DS) /* second bank of device IDs */
return;
if (chan->dev_id != DMA_ID_GP04 && chan->dev_id != DMA_ID_GP05)
@@ -307,16 +315,19 @@
/*
* Clear the DMA buffer done bits in the mode register.
*/
-static __inline__ void clear_dma_done0(unsigned int dmanr)
+static inline void clear_dma_done0(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
au_writel(DMA_D0, chan->io + DMA_MODE_CLEAR);
}
-static __inline__ void clear_dma_done1(unsigned int dmanr)
+
+static inline void clear_dma_done1(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
au_writel(DMA_D1, chan->io + DMA_MODE_CLEAR);
@@ -325,16 +336,17 @@
/*
* This does nothing - not applicable to Au1000 DMA.
*/
-static __inline__ void set_dma_page(unsigned int dmanr, char pagenr)
+static inline void set_dma_page(unsigned int dmanr, char pagenr)
{
}
/*
* Set Buffer 0 transfer address for specific DMA channel.
*/
-static __inline__ void set_dma_addr0(unsigned int dmanr, unsigned int a)
+static inline void set_dma_addr0(unsigned int dmanr, unsigned int a)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
au_writel(a, chan->io + DMA_BUFFER0_START);
@@ -343,9 +355,10 @@
/*
* Set Buffer 1 transfer address for specific DMA channel.
*/
-static __inline__ void set_dma_addr1(unsigned int dmanr, unsigned int a)
+static inline void set_dma_addr1(unsigned int dmanr, unsigned int a)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
au_writel(a, chan->io + DMA_BUFFER1_START);
@@ -355,10 +368,10 @@
/*
* Set Buffer 0 transfer size (max 64k) for a specific DMA channel.
*/
-static __inline__ void set_dma_count0(unsigned int dmanr,
- unsigned int count)
+static inline void set_dma_count0(unsigned int dmanr, unsigned int count)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
count &= DMA_COUNT_MASK;
@@ -368,10 +381,10 @@
/*
* Set Buffer 1 transfer size (max 64k) for a specific DMA channel.
*/
-static __inline__ void set_dma_count1(unsigned int dmanr,
- unsigned int count)
+static inline void set_dma_count1(unsigned int dmanr, unsigned int count)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
count &= DMA_COUNT_MASK;
@@ -381,10 +394,10 @@
/*
* Set both buffer transfer sizes (max 64k) for a specific DMA channel.
*/
-static __inline__ void set_dma_count(unsigned int dmanr,
- unsigned int count)
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
count &= DMA_COUNT_MASK;
@@ -396,35 +409,36 @@
* Returns which buffer has its done bit set in the mode register.
* Returns -1 if neither or both done bits set.
*/
-static __inline__ unsigned int get_dma_buffer_done(unsigned int dmanr)
+static inline unsigned int get_dma_buffer_done(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return 0;
-
- return au_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1);
+ return au_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1);
}
/*
* Returns the DMA channel's Buffer Done IRQ number.
*/
-static __inline__ int get_dma_done_irq(unsigned int dmanr)
+static inline int get_dma_done_irq(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return -1;
-
return chan->irq;
}
/*
* Get DMA residue count. Returns the number of _bytes_ left to transfer.
*/
-static __inline__ int get_dma_residue(unsigned int dmanr)
+static inline int get_dma_residue(unsigned int dmanr)
{
int curBufCntReg, count;
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return 0;
@@ -442,4 +456,3 @@
}
#endif /* __ASM_AU1000_DMA_H */
-
diff --git a/include/asm-mips/mach-au1x00/au1000_gpio.h b/include/asm-mips/mach-au1x00/au1000_gpio.h
index 298f920..d8c96fd 100644
--- a/include/asm-mips/mach-au1x00/au1000_gpio.h
+++ b/include/asm-mips/mach-au1x00/au1000_gpio.h
@@ -2,12 +2,12 @@
* FILE NAME au1000_gpio.h
*
* BRIEF MODULE DESCRIPTION
- * API to Alchemy Au1000 GPIO device.
+ * API to Alchemy Au1xx0 GPIO device.
*
* Author: MontaVista Software, Inc. <source@mvista.com>
- * Steve Longerbeam <stevel@mvista.com>
+ * Steve Longerbeam
*
- * Copyright 2001 MontaVista Software Inc.
+ * Copyright 2001, 2008 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -37,12 +37,12 @@
#define AU1000GPIO_IOC_MAGIC 'A'
-#define AU1000GPIO_IN _IOR (AU1000GPIO_IOC_MAGIC, 0, int)
-#define AU1000GPIO_SET _IOW (AU1000GPIO_IOC_MAGIC, 1, int)
-#define AU1000GPIO_CLEAR _IOW (AU1000GPIO_IOC_MAGIC, 2, int)
-#define AU1000GPIO_OUT _IOW (AU1000GPIO_IOC_MAGIC, 3, int)
-#define AU1000GPIO_TRISTATE _IOW (AU1000GPIO_IOC_MAGIC, 4, int)
-#define AU1000GPIO_AVAIL_MASK _IOR (AU1000GPIO_IOC_MAGIC, 5, int)
+#define AU1000GPIO_IN _IOR(AU1000GPIO_IOC_MAGIC, 0, int)
+#define AU1000GPIO_SET _IOW(AU1000GPIO_IOC_MAGIC, 1, int)
+#define AU1000GPIO_CLEAR _IOW(AU1000GPIO_IOC_MAGIC, 2, int)
+#define AU1000GPIO_OUT _IOW(AU1000GPIO_IOC_MAGIC, 3, int)
+#define AU1000GPIO_TRISTATE _IOW(AU1000GPIO_IOC_MAGIC, 4, int)
+#define AU1000GPIO_AVAIL_MASK _IOR(AU1000GPIO_IOC_MAGIC, 5, int)
#ifdef __KERNEL__
extern u32 get_au1000_avail_gpio_mask(void);
diff --git a/include/asm-mips/mach-au1x00/au1550_spi.h b/include/asm-mips/mach-au1x00/au1550_spi.h
index c2f0466..40e6c48 100644
--- a/include/asm-mips/mach-au1x00/au1550_spi.h
+++ b/include/asm-mips/mach-au1x00/au1550_spi.h
@@ -1,5 +1,5 @@
/*
- * au1550_spi.h - au1550 psc spi controller driver - platform data struct
+ * au1550_spi.h - Au1550 PSC SPI controller driver - platform data structure
*/
#ifndef _AU1550_SPI_H_
diff --git a/include/asm-mips/mach-au1x00/au1xxx.h b/include/asm-mips/mach-au1x00/au1xxx.h
index 9471359..1b36550 100644
--- a/include/asm-mips/mach-au1x00/au1xxx.h
+++ b/include/asm-mips/mach-au1x00/au1xxx.h
@@ -23,10 +23,10 @@
#ifndef _AU1XXX_H_
#define _AU1XXX_H_
-
#include <asm/mach-au1x00/au1000.h>
-#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
+#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \
+ defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
#include <asm/mach-db1x00/db1x00.h>
#elif defined(CONFIG_MIPS_PB1550)
diff --git a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
index 93d507cea..ad17d7c 100644
--- a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
+++ b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
@@ -28,17 +28,18 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-/* Specifics for the Au1xxx Descriptor-Based DMA Controllers, first
- * seen in the AU1550 part.
+/*
+ * Specifics for the Au1xxx Descriptor-Based DMA Controller,
+ * first seen in the AU1550 part.
*/
#ifndef _AU1000_DBDMA_H_
#define _AU1000_DBDMA_H_
-
#ifndef _LANGUAGE_ASSEMBLY
-/* The DMA base addresses.
- * The Channels are every 256 bytes (0x0100) from the channel 0 base.
+/*
+ * The DMA base addresses.
+ * The channels are every 256 bytes (0x0100) from the channel 0 base.
* Interrupt status/enable is bits 15:0 for channels 15 to zero.
*/
#define DDMA_GLOBAL_BASE 0xb4003000
@@ -51,16 +52,14 @@
u32 ddma_inten;
} dbdma_global_t;
-/* General Configuration.
-*/
+/* General Configuration. */
#define DDMA_CONFIG_AF (1 << 2)
#define DDMA_CONFIG_AH (1 << 1)
#define DDMA_CONFIG_AL (1 << 0)
#define DDMA_THROTTLE_EN (1 << 31)
-/* The structure of a DMA Channel.
-*/
+/* The structure of a DMA Channel. */
typedef volatile struct au1xxx_dma_channel {
u32 ddma_cfg; /* See below */
u32 ddma_desptr; /* 32-byte aligned pointer to descriptor */
@@ -69,8 +68,7 @@
u32 ddma_irq; /* If bit 0 set, interrupt pending */
u32 ddma_stat; /* See below */
u32 ddma_bytecnt; /* Byte count, valid only when chan idle */
- /* Remainder, up to the 256 byte boundary, is reserved.
- */
+ /* Remainder, up to the 256 byte boundary, is reserved. */
} au1x_dma_chan_t;
#define DDMA_CFG_SED (1 << 9) /* source DMA level/edge detect */
@@ -84,7 +82,8 @@
#define DDMA_CFG_DBE (1 << 1) /* Destination big endian */
#define DDMA_CFG_EN (1 << 0) /* Channel enable */
-/* Always set when descriptor processing done, regardless of
+/*
+ * Always set when descriptor processing done, regardless of
* interrupt enable state. Reflected in global intstat, don't
* clear this until global intstat is read/used.
*/
@@ -94,7 +93,8 @@
#define DDMA_STAT_V (1 << 1) /* Descriptor valid */
#define DDMA_STAT_H (1 << 0) /* Channel Halted */
-/* "Standard" DDMA Descriptor.
+/*
+ * "Standard" DDMA Descriptor.
* Must be 32-byte aligned.
*/
typedef volatile struct au1xxx_ddma_desc {
@@ -106,8 +106,9 @@
u32 dscr_dest1; /* See below */
u32 dscr_stat; /* completion status */
u32 dscr_nxtptr; /* Next descriptor pointer (mostly) */
- /* First 32bytes are HW specific!!!
- Lets have some SW data following.. make sure its 32bytes
+ /*
+ * First 32 bytes are HW specific!!!
+ * Lets have some SW data following -- make sure it's 32 bytes.
*/
u32 sw_status;
u32 sw_context;
@@ -130,10 +131,9 @@
#define DSCR_CMD0_CV (0x1 << 2) /* Clear Valid when done */
#define DSCR_CMD0_ST_MASK (0x3 << 0) /* Status instruction */
-#define SW_STATUS_INUSE (1<<0)
+#define SW_STATUS_INUSE (1 << 0)
-/* Command 0 device IDs.
-*/
+/* Command 0 device IDs. */
#ifdef CONFIG_SOC_AU1550
#define DSCR_CMD0_UART0_TX 0
#define DSCR_CMD0_UART0_RX 1
@@ -198,16 +198,15 @@
#define DSCR_CMD0_THROTTLE 30
#define DSCR_CMD0_ALWAYS 31
#define DSCR_NDEV_IDS 32
-/* THis macro is used to find/create custom device types */
-#define DSCR_DEV2CUSTOM_ID(x, d) (((((x)&0xFFFF)<<8)|0x32000000)|((d)&0xFF))
-#define DSCR_CUSTOM2DEV_ID(x) ((x)&0xFF)
-
+/* This macro is used to find/create custom device types */
+#define DSCR_DEV2CUSTOM_ID(x, d) (((((x) & 0xFFFF) << 8) | 0x32000000) | \
+ ((d) & 0xFF))
+#define DSCR_CUSTOM2DEV_ID(x) ((x) & 0xFF)
#define DSCR_CMD0_SID(x) (((x) & 0x1f) << 25)
#define DSCR_CMD0_DID(x) (((x) & 0x1f) << 20)
-/* Source/Destination transfer width.
-*/
+/* Source/Destination transfer width. */
#define DSCR_CMD0_BYTE 0
#define DSCR_CMD0_HALFWORD 1
#define DSCR_CMD0_WORD 2
@@ -215,16 +214,14 @@
#define DSCR_CMD0_SW(x) (((x) & 0x3) << 18)
#define DSCR_CMD0_DW(x) (((x) & 0x3) << 16)
-/* DDMA Descriptor Type.
-*/
+/* DDMA Descriptor Type. */
#define DSCR_CMD0_STANDARD 0
#define DSCR_CMD0_LITERAL 1
#define DSCR_CMD0_CMP_BRANCH 2
#define DSCR_CMD0_DT(x) (((x) & 0x3) << 13)
-/* Status Instruction.
-*/
+/* Status Instruction. */
#define DSCR_CMD0_ST_NOCHANGE 0 /* Don't change */
#define DSCR_CMD0_ST_CURRENT 1 /* Write current status */
#define DSCR_CMD0_ST_CMD0 2 /* Write cmd0 with V cleared */
@@ -232,23 +229,20 @@
#define DSCR_CMD0_ST(x) (((x) & 0x3) << 0)
-/* Descriptor Command 1
-*/
+/* Descriptor Command 1. */
#define DSCR_CMD1_SUPTR_MASK (0xf << 28) /* upper 4 bits of src addr */
#define DSCR_CMD1_DUPTR_MASK (0xf << 24) /* upper 4 bits of dest addr */
#define DSCR_CMD1_FL_MASK (0x3 << 22) /* Flag bits */
#define DSCR_CMD1_BC_MASK (0x3fffff) /* Byte count */
-/* Flag description.
-*/
+/* Flag description. */
#define DSCR_CMD1_FL_MEM_STRIDE0 0
#define DSCR_CMD1_FL_MEM_STRIDE1 1
#define DSCR_CMD1_FL_MEM_STRIDE2 2
#define DSCR_CMD1_FL(x) (((x) & 0x3) << 22)
-/* Source1, 1-dimensional stride.
-*/
+/* Source1, 1-dimensional stride. */
#define DSCR_SRC1_STS_MASK (3 << 30) /* Src xfer size */
#define DSCR_SRC1_SAM_MASK (3 << 28) /* Src xfer movement */
#define DSCR_SRC1_SB_MASK (0x3fff << 14) /* Block size */
@@ -256,8 +250,7 @@
#define DSCR_SRC1_SS_MASK (0x3fff << 0) /* Stride */
#define DSCR_SRC1_SS(x) (((x) & 0x3fff) << 0)
-/* Dest1, 1-dimensional stride.
-*/
+/* Dest1, 1-dimensional stride. */
#define DSCR_DEST1_DTS_MASK (3 << 30) /* Dest xfer size */
#define DSCR_DEST1_DAM_MASK (3 << 28) /* Dest xfer movement */
#define DSCR_DEST1_DB_MASK (0x3fff << 14) /* Block size */
@@ -279,29 +272,27 @@
#define DSCR_SRC1_SAM(x) (((x) & 3) << 28)
#define DSCR_DEST1_DAM(x) (((x) & 3) << 28)
-/* The next descriptor pointer.
-*/
+/* The next descriptor pointer. */
#define DSCR_NXTPTR_MASK (0x07ffffff)
#define DSCR_NXTPTR(x) ((x) >> 5)
#define DSCR_GET_NXTPTR(x) ((x) << 5)
#define DSCR_NXTPTR_MS (1 << 27)
-/* The number of DBDMA channels.
-*/
+/* The number of DBDMA channels. */
#define NUM_DBDMA_CHANS 16
/*
- * Ddma API definitions
+ * DDMA API definitions
* FIXME: may not fit to this header file
*/
typedef struct dbdma_device_table {
- u32 dev_id;
- u32 dev_flags;
- u32 dev_tsize;
- u32 dev_devwidth;
- u32 dev_physaddr; /* If FIFO */
- u32 dev_intlevel;
- u32 dev_intpolarity;
+ u32 dev_id;
+ u32 dev_flags;
+ u32 dev_tsize;
+ u32 dev_devwidth;
+ u32 dev_physaddr; /* If FIFO */
+ u32 dev_intlevel;
+ u32 dev_intpolarity;
} dbdev_tab_t;
@@ -316,44 +307,41 @@
au1x_ddma_desc_t *chan_desc_base;
au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr;
void *chan_callparam;
- void (*chan_callback)(int, void *);
+ void (*chan_callback)(int, void *);
} chan_tab_t;
#define DEV_FLAGS_INUSE (1 << 0)
#define DEV_FLAGS_ANYUSE (1 << 1)
#define DEV_FLAGS_OUT (1 << 2)
#define DEV_FLAGS_IN (1 << 3)
-#define DEV_FLAGS_BURSTABLE (1 << 4)
+#define DEV_FLAGS_BURSTABLE (1 << 4)
#define DEV_FLAGS_SYNC (1 << 5)
-/* end Ddma API definitions */
+/* end DDMA API definitions */
-/* External functions for drivers to use.
-*/
-/* Use this to allocate a dbdma channel. The device ids are one of the
- * DSCR_CMD0 devices IDs, which is usually redefined to a more
- * meaningful name. The 'callback' is called during dma completion
+/*
+ * External functions for drivers to use.
+ * Use this to allocate a DBDMA channel. The device IDs are one of
+ * the DSCR_CMD0 devices IDs, which is usually redefined to a more
+ * meaningful name. The 'callback' is called during DMA completion
* interrupt.
*/
extern u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
- void (*callback)(int, void *), void *callparam);
+ void (*callback)(int, void *),
+ void *callparam);
#define DBDMA_MEM_CHAN DSCR_CMD0_ALWAYS
-/* Set the device width of a in/out fifo.
-*/
+/* Set the device width of an in/out FIFO. */
u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits);
-/* Allocate a ring of descriptors for dbdma.
-*/
+/* Allocate a ring of descriptors for DBDMA. */
u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries);
-/* Put buffers on source/destination descriptors.
-*/
+/* Put buffers on source/destination descriptors. */
u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags);
u32 _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags);
-/* Get a buffer from the destination descriptor.
-*/
+/* Get a buffer from the destination descriptor. */
u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes);
void au1xxx_dbdma_stop(u32 chanid);
@@ -364,29 +352,34 @@
void au1xxx_dbdma_chan_free(u32 chanid);
void au1xxx_dbdma_dump(u32 chanid);
-u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr );
+u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr);
-u32 au1xxx_ddma_add_device( dbdev_tab_t *dev );
-void * au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
+u32 au1xxx_ddma_add_device(dbdev_tab_t *dev);
+void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
/*
- Some compatibilty macros --
- Needed to make changes to API without breaking existing drivers
-*/
-#define au1xxx_dbdma_put_source(chanid, buf, nbytes)_au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE)
-#define au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags)
-#define put_source_flags(chanid, buf, nbytes, flags) au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags)
+ * Some compatibilty macros -- needed to make changes to API
+ * without breaking existing drivers.
+ */
+#define au1xxx_dbdma_put_source(chanid, buf, nbytes) \
+ _au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE)
+#define au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) \
+ _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags)
+#define put_source_flags(chanid, buf, nbytes, flags) \
+ au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags)
-
-#define au1xxx_dbdma_put_dest(chanid, buf, nbytes) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE)
-#define au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags)
-#define put_dest_flags(chanid, buf, nbytes, flags) au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags)
+#define au1xxx_dbdma_put_dest(chanid, buf, nbytes) \
+ _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE)
+#define au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) \
+ _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags)
+#define put_dest_flags(chanid, buf, nbytes, flags) \
+ au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags)
/*
* Flags for the put_source/put_dest functions.
*/
-#define DDMA_FLAGS_IE (1<<0)
-#define DDMA_FLAGS_NOIE (1<<1)
+#define DDMA_FLAGS_IE (1 << 0)
+#define DDMA_FLAGS_NOIE (1 << 1)
#endif /* _LANGUAGE_ASSEMBLY */
#endif /* _AU1000_DBDMA_H_ */
diff --git a/include/asm-mips/mach-au1x00/au1xxx_ide.h b/include/asm-mips/mach-au1x00/au1xxx_ide.h
index b493a5e..60638b8 100644
--- a/include/asm-mips/mach-au1x00/au1xxx_ide.h
+++ b/include/asm-mips/mach-au1x00/au1xxx_ide.h
@@ -31,167 +31,164 @@
*/
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
- #define DMA_WAIT_TIMEOUT 100
- #define NUM_DESCRIPTORS PRD_ENTRIES
+#define DMA_WAIT_TIMEOUT 100
+#define NUM_DESCRIPTORS PRD_ENTRIES
#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */
- #define NUM_DESCRIPTORS 2
+#define NUM_DESCRIPTORS 2
#endif
#ifndef AU1XXX_ATA_RQSIZE
- #define AU1XXX_ATA_RQSIZE 128
+#define AU1XXX_ATA_RQSIZE 128
#endif
/* Disable Burstable-Support for DBDMA */
#ifndef CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
- #define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0
+#define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0
#endif
#ifdef CONFIG_PM
/*
-* This will enable the device to be powered up when write() or read()
-* is called. If this is not defined, the driver will return -EBUSY.
-*/
+ * This will enable the device to be powered up when write() or read()
+ * is called. If this is not defined, the driver will return -EBUSY.
+ */
#define WAKE_ON_ACCESS 1
-typedef struct
-{
- spinlock_t lock; /* Used to block on state transitions */
- au1xxx_power_dev_t *dev; /* Power Managers device structure */
- unsigned stopped; /* USed to signaling device is stopped */
+typedef struct {
+ spinlock_t lock; /* Used to block on state transitions */
+ au1xxx_power_dev_t *dev; /* Power Managers device structure */
+ unsigned stopped; /* Used to signal device is stopped */
} pm_state;
#endif
-
-typedef struct
-{
- u32 tx_dev_id, rx_dev_id, target_dev_id;
- u32 tx_chan, rx_chan;
- void *tx_desc_head, *rx_desc_head;
- ide_hwif_t *hwif;
+typedef struct {
+ u32 tx_dev_id, rx_dev_id, target_dev_id;
+ u32 tx_chan, rx_chan;
+ void *tx_desc_head, *rx_desc_head;
+ ide_hwif_t *hwif;
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
- ide_drive_t *drive;
- struct dbdma_cmd *dma_table_cpu;
- dma_addr_t dma_table_dma;
+ ide_drive_t *drive;
+ struct dbdma_cmd *dma_table_cpu;
+ dma_addr_t dma_table_dma;
#endif
int irq;
u32 regbase;
#ifdef CONFIG_PM
- pm_state pm;
+ pm_state pm;
#endif
} _auide_hwif;
-/*******************************************************************************
-* PIO Mode timing calculation : *
-* *
-* Static Bus Spec ATA Spec *
-* Tcsoe = t1 *
-* Toecs = t9 *
-* Twcs = t9 *
-* Tcsh = t2i | t2 *
-* Tcsoff = t2i | t2 *
-* Twp = t2 *
-* Tcsw = t1 *
-* Tpm = 0 *
-* Ta = t1+t2 *
-*******************************************************************************/
+/******************************************************************************/
+/* PIO Mode timing calculation : */
+/* */
+/* Static Bus Spec ATA Spec */
+/* Tcsoe = t1 */
+/* Toecs = t9 */
+/* Twcs = t9 */
+/* Tcsh = t2i | t2 */
+/* Tcsoff = t2i | t2 */
+/* Twp = t2 */
+/* Tcsw = t1 */
+/* Tpm = 0 */
+/* Ta = t1+t2 */
+/******************************************************************************/
-#define TCSOE_MASK (0x07<<29)
-#define TOECS_MASK (0x07<<26)
-#define TWCS_MASK (0x07<<28)
-#define TCSH_MASK (0x0F<<24)
-#define TCSOFF_MASK (0x07<<20)
-#define TWP_MASK (0x3F<<14)
-#define TCSW_MASK (0x0F<<10)
-#define TPM_MASK (0x0F<<6)
-#define TA_MASK (0x3F<<0)
-#define TS_MASK (1<<8)
+#define TCSOE_MASK (0x07 << 29)
+#define TOECS_MASK (0x07 << 26)
+#define TWCS_MASK (0x07 << 28)
+#define TCSH_MASK (0x0F << 24)
+#define TCSOFF_MASK (0x07 << 20)
+#define TWP_MASK (0x3F << 14)
+#define TCSW_MASK (0x0F << 10)
+#define TPM_MASK (0x0F << 6)
+#define TA_MASK (0x3F << 0)
+#define TS_MASK (1 << 8)
/* Timing parameters PIO mode 0 */
-#define SBC_IDE_PIO0_TCSOE (0x04<<29)
-#define SBC_IDE_PIO0_TOECS (0x01<<26)
-#define SBC_IDE_PIO0_TWCS (0x02<<28)
-#define SBC_IDE_PIO0_TCSH (0x08<<24)
-#define SBC_IDE_PIO0_TCSOFF (0x07<<20)
-#define SBC_IDE_PIO0_TWP (0x10<<14)
-#define SBC_IDE_PIO0_TCSW (0x04<<10)
-#define SBC_IDE_PIO0_TPM (0x0<<6)
-#define SBC_IDE_PIO0_TA (0x15<<0)
+#define SBC_IDE_PIO0_TCSOE (0x04 << 29)
+#define SBC_IDE_PIO0_TOECS (0x01 << 26)
+#define SBC_IDE_PIO0_TWCS (0x02 << 28)
+#define SBC_IDE_PIO0_TCSH (0x08 << 24)
+#define SBC_IDE_PIO0_TCSOFF (0x07 << 20)
+#define SBC_IDE_PIO0_TWP (0x10 << 14)
+#define SBC_IDE_PIO0_TCSW (0x04 << 10)
+#define SBC_IDE_PIO0_TPM (0x00 << 6)
+#define SBC_IDE_PIO0_TA (0x15 << 0)
/* Timing parameters PIO mode 1 */
-#define SBC_IDE_PIO1_TCSOE (0x03<<29)
-#define SBC_IDE_PIO1_TOECS (0x01<<26)
-#define SBC_IDE_PIO1_TWCS (0x01<<28)
-#define SBC_IDE_PIO1_TCSH (0x06<<24)
-#define SBC_IDE_PIO1_TCSOFF (0x06<<20)
-#define SBC_IDE_PIO1_TWP (0x08<<14)
-#define SBC_IDE_PIO1_TCSW (0x03<<10)
-#define SBC_IDE_PIO1_TPM (0x00<<6)
-#define SBC_IDE_PIO1_TA (0x0B<<0)
+#define SBC_IDE_PIO1_TCSOE (0x03 << 29)
+#define SBC_IDE_PIO1_TOECS (0x01 << 26)
+#define SBC_IDE_PIO1_TWCS (0x01 << 28)
+#define SBC_IDE_PIO1_TCSH (0x06 << 24)
+#define SBC_IDE_PIO1_TCSOFF (0x06 << 20)
+#define SBC_IDE_PIO1_TWP (0x08 << 14)
+#define SBC_IDE_PIO1_TCSW (0x03 << 10)
+#define SBC_IDE_PIO1_TPM (0x00 << 6)
+#define SBC_IDE_PIO1_TA (0x0B << 0)
/* Timing parameters PIO mode 2 */
-#define SBC_IDE_PIO2_TCSOE (0x05<<29)
-#define SBC_IDE_PIO2_TOECS (0x01<<26)
-#define SBC_IDE_PIO2_TWCS (0x01<<28)
-#define SBC_IDE_PIO2_TCSH (0x07<<24)
-#define SBC_IDE_PIO2_TCSOFF (0x07<<20)
-#define SBC_IDE_PIO2_TWP (0x1F<<14)
-#define SBC_IDE_PIO2_TCSW (0x05<<10)
-#define SBC_IDE_PIO2_TPM (0x00<<6)
-#define SBC_IDE_PIO2_TA (0x22<<0)
+#define SBC_IDE_PIO2_TCSOE (0x05 << 29)
+#define SBC_IDE_PIO2_TOECS (0x01 << 26)
+#define SBC_IDE_PIO2_TWCS (0x01 << 28)
+#define SBC_IDE_PIO2_TCSH (0x07 << 24)
+#define SBC_IDE_PIO2_TCSOFF (0x07 << 20)
+#define SBC_IDE_PIO2_TWP (0x1F << 14)
+#define SBC_IDE_PIO2_TCSW (0x05 << 10)
+#define SBC_IDE_PIO2_TPM (0x00 << 6)
+#define SBC_IDE_PIO2_TA (0x22 << 0)
/* Timing parameters PIO mode 3 */
-#define SBC_IDE_PIO3_TCSOE (0x05<<29)
-#define SBC_IDE_PIO3_TOECS (0x01<<26)
-#define SBC_IDE_PIO3_TWCS (0x01<<28)
-#define SBC_IDE_PIO3_TCSH (0x0D<<24)
-#define SBC_IDE_PIO3_TCSOFF (0x0D<<20)
-#define SBC_IDE_PIO3_TWP (0x15<<14)
-#define SBC_IDE_PIO3_TCSW (0x05<<10)
-#define SBC_IDE_PIO3_TPM (0x00<<6)
-#define SBC_IDE_PIO3_TA (0x1A<<0)
+#define SBC_IDE_PIO3_TCSOE (0x05 << 29)
+#define SBC_IDE_PIO3_TOECS (0x01 << 26)
+#define SBC_IDE_PIO3_TWCS (0x01 << 28)
+#define SBC_IDE_PIO3_TCSH (0x0D << 24)
+#define SBC_IDE_PIO3_TCSOFF (0x0D << 20)
+#define SBC_IDE_PIO3_TWP (0x15 << 14)
+#define SBC_IDE_PIO3_TCSW (0x05 << 10)
+#define SBC_IDE_PIO3_TPM (0x00 << 6)
+#define SBC_IDE_PIO3_TA (0x1A << 0)
/* Timing parameters PIO mode 4 */
-#define SBC_IDE_PIO4_TCSOE (0x04<<29)
-#define SBC_IDE_PIO4_TOECS (0x01<<26)
-#define SBC_IDE_PIO4_TWCS (0x01<<28)
-#define SBC_IDE_PIO4_TCSH (0x04<<24)
-#define SBC_IDE_PIO4_TCSOFF (0x04<<20)
-#define SBC_IDE_PIO4_TWP (0x0D<<14)
-#define SBC_IDE_PIO4_TCSW (0x03<<10)
-#define SBC_IDE_PIO4_TPM (0x00<<6)
-#define SBC_IDE_PIO4_TA (0x12<<0)
+#define SBC_IDE_PIO4_TCSOE (0x04 << 29)
+#define SBC_IDE_PIO4_TOECS (0x01 << 26)
+#define SBC_IDE_PIO4_TWCS (0x01 << 28)
+#define SBC_IDE_PIO4_TCSH (0x04 << 24)
+#define SBC_IDE_PIO4_TCSOFF (0x04 << 20)
+#define SBC_IDE_PIO4_TWP (0x0D << 14)
+#define SBC_IDE_PIO4_TCSW (0x03 << 10)
+#define SBC_IDE_PIO4_TPM (0x00 << 6)
+#define SBC_IDE_PIO4_TA (0x12 << 0)
/* Timing parameters MDMA mode 0 */
-#define SBC_IDE_MDMA0_TCSOE (0x03<<29)
-#define SBC_IDE_MDMA0_TOECS (0x01<<26)
-#define SBC_IDE_MDMA0_TWCS (0x01<<28)
-#define SBC_IDE_MDMA0_TCSH (0x07<<24)
-#define SBC_IDE_MDMA0_TCSOFF (0x07<<20)
-#define SBC_IDE_MDMA0_TWP (0x0C<<14)
-#define SBC_IDE_MDMA0_TCSW (0x03<<10)
-#define SBC_IDE_MDMA0_TPM (0x00<<6)
-#define SBC_IDE_MDMA0_TA (0x0F<<0)
+#define SBC_IDE_MDMA0_TCSOE (0x03 << 29)
+#define SBC_IDE_MDMA0_TOECS (0x01 << 26)
+#define SBC_IDE_MDMA0_TWCS (0x01 << 28)
+#define SBC_IDE_MDMA0_TCSH (0x07 << 24)
+#define SBC_IDE_MDMA0_TCSOFF (0x07 << 20)
+#define SBC_IDE_MDMA0_TWP (0x0C << 14)
+#define SBC_IDE_MDMA0_TCSW (0x03 << 10)
+#define SBC_IDE_MDMA0_TPM (0x00 << 6)
+#define SBC_IDE_MDMA0_TA (0x0F << 0)
/* Timing parameters MDMA mode 1 */
-#define SBC_IDE_MDMA1_TCSOE (0x05<<29)
-#define SBC_IDE_MDMA1_TOECS (0x01<<26)
-#define SBC_IDE_MDMA1_TWCS (0x01<<28)
-#define SBC_IDE_MDMA1_TCSH (0x05<<24)
-#define SBC_IDE_MDMA1_TCSOFF (0x05<<20)
-#define SBC_IDE_MDMA1_TWP (0x0F<<14)
-#define SBC_IDE_MDMA1_TCSW (0x05<<10)
-#define SBC_IDE_MDMA1_TPM (0x00<<6)
-#define SBC_IDE_MDMA1_TA (0x15<<0)
+#define SBC_IDE_MDMA1_TCSOE (0x05 << 29)
+#define SBC_IDE_MDMA1_TOECS (0x01 << 26)
+#define SBC_IDE_MDMA1_TWCS (0x01 << 28)
+#define SBC_IDE_MDMA1_TCSH (0x05 << 24)
+#define SBC_IDE_MDMA1_TCSOFF (0x05 << 20)
+#define SBC_IDE_MDMA1_TWP (0x0F << 14)
+#define SBC_IDE_MDMA1_TCSW (0x05 << 10)
+#define SBC_IDE_MDMA1_TPM (0x00 << 6)
+#define SBC_IDE_MDMA1_TA (0x15 << 0)
/* Timing parameters MDMA mode 2 */
-#define SBC_IDE_MDMA2_TCSOE (0x04<<29)
-#define SBC_IDE_MDMA2_TOECS (0x01<<26)
-#define SBC_IDE_MDMA2_TWCS (0x01<<28)
-#define SBC_IDE_MDMA2_TCSH (0x04<<24)
-#define SBC_IDE_MDMA2_TCSOFF (0x04<<20)
-#define SBC_IDE_MDMA2_TWP (0x0D<<14)
-#define SBC_IDE_MDMA2_TCSW (0x04<<10)
-#define SBC_IDE_MDMA2_TPM (0x00<<6)
-#define SBC_IDE_MDMA2_TA (0x12<<0)
+#define SBC_IDE_MDMA2_TCSOE (0x04 << 29)
+#define SBC_IDE_MDMA2_TOECS (0x01 << 26)
+#define SBC_IDE_MDMA2_TWCS (0x01 << 28)
+#define SBC_IDE_MDMA2_TCSH (0x04 << 24)
+#define SBC_IDE_MDMA2_TCSOFF (0x04 << 20)
+#define SBC_IDE_MDMA2_TWP (0x0D << 14)
+#define SBC_IDE_MDMA2_TCSW (0x04 << 10)
+#define SBC_IDE_MDMA2_TPM (0x00 << 6)
+#define SBC_IDE_MDMA2_TA (0x12 << 0)
#define SBC_IDE_TIMING(mode) \
- SBC_IDE_##mode##_TWCS | \
- SBC_IDE_##mode##_TCSH | \
- SBC_IDE_##mode##_TCSOFF | \
- SBC_IDE_##mode##_TWP | \
- SBC_IDE_##mode##_TCSW | \
- SBC_IDE_##mode##_TPM | \
- SBC_IDE_##mode##_TA
+ (SBC_IDE_##mode##_TWCS | \
+ SBC_IDE_##mode##_TCSH | \
+ SBC_IDE_##mode##_TCSOFF | \
+ SBC_IDE_##mode##_TWP | \
+ SBC_IDE_##mode##_TCSW | \
+ SBC_IDE_##mode##_TPM | \
+ SBC_IDE_##mode##_TA)
diff --git a/include/asm-mips/mach-au1x00/au1xxx_psc.h b/include/asm-mips/mach-au1x00/au1xxx_psc.h
index 1bd4e27..dae4eca 100644
--- a/include/asm-mips/mach-au1x00/au1xxx_psc.h
+++ b/include/asm-mips/mach-au1x00/au1xxx_psc.h
@@ -33,7 +33,6 @@
#ifndef _AU1000_PSC_H_
#define _AU1000_PSC_H_
-
/* The PSC base addresses. */
#ifdef CONFIG_SOC_AU1550
#define PSC0_BASE_ADDR 0xb1a00000
@@ -47,8 +46,8 @@
#define PSC1_BASE_ADDR 0xb1b00000
#endif
-/* The PSC select and control registers are common to
- * all protocols.
+/*
+ * The PSC select and control registers are common to all protocols.
*/
#define PSC_SEL_OFFSET 0x00000000
#define PSC_CTRL_OFFSET 0x00000004
@@ -59,18 +58,17 @@
#define PSC_SEL_CLK_SERCLK (2 << 4)
#define PSC_SEL_PS_MASK 0x00000007
-#define PSC_SEL_PS_DISABLED (0)
-#define PSC_SEL_PS_SPIMODE (2)
-#define PSC_SEL_PS_I2SMODE (3)
-#define PSC_SEL_PS_AC97MODE (4)
-#define PSC_SEL_PS_SMBUSMODE (5)
+#define PSC_SEL_PS_DISABLED 0
+#define PSC_SEL_PS_SPIMODE 2
+#define PSC_SEL_PS_I2SMODE 3
+#define PSC_SEL_PS_AC97MODE 4
+#define PSC_SEL_PS_SMBUSMODE 5
-#define PSC_CTRL_DISABLE (0)
-#define PSC_CTRL_SUSPEND (2)
-#define PSC_CTRL_ENABLE (3)
+#define PSC_CTRL_DISABLE 0
+#define PSC_CTRL_SUSPEND 2
+#define PSC_CTRL_ENABLE 3
-/* AC97 Registers.
-*/
+/* AC97 Registers. */
#define PSC_AC97CFG_OFFSET 0x00000008
#define PSC_AC97MSK_OFFSET 0x0000000c
#define PSC_AC97PCR_OFFSET 0x00000010
@@ -95,8 +93,7 @@
#define PSC_AC97GPO (AC97_PSC_BASE + PSC_AC97GPO_OFFSET)
#define PSC_AC97GPI (AC97_PSC_BASE + PSC_AC97GPI_OFFSET)
-/* AC97 Config Register.
-*/
+/* AC97 Config Register. */
#define PSC_AC97CFG_RT_MASK (3 << 30)
#define PSC_AC97CFG_RT_FIFO1 (0 << 30)
#define PSC_AC97CFG_RT_FIFO2 (1 << 30)
@@ -118,20 +115,19 @@
#define PSC_AC97CFG_RXSLOT_MASK (0x3ff << 1)
#define PSC_AC97CFG_GE_ENABLE (1)
-/* Enable slots 3-12.
-*/
+/* Enable slots 3-12. */
#define PSC_AC97CFG_TXSLOT_ENA(x) (1 << (((x) - 3) + 11))
#define PSC_AC97CFG_RXSLOT_ENA(x) (1 << (((x) - 3) + 1))
-/* The word length equation is ((x) * 2) + 2, so choose 'x' appropriately.
+/*
+ * The word length equation is ((x) * 2) + 2, so choose 'x' appropriately.
* The only sensible numbers are 7, 9, or possibly 11. Nah, just do the
* arithmetic in the macro.
*/
-#define PSC_AC97CFG_SET_LEN(x) (((((x)-2)/2) & 0xf) << 21)
+#define PSC_AC97CFG_SET_LEN(x) (((((x) - 2) / 2) & 0xf) << 21)
#define PSC_AC97CFG_GET_LEN(x) (((((x) >> 21) & 0xf) * 2) + 2)
-/* AC97 Mask Register.
-*/
+/* AC97 Mask Register. */
#define PSC_AC97MSK_GR (1 << 25)
#define PSC_AC97MSK_CD (1 << 24)
#define PSC_AC97MSK_RR (1 << 13)
@@ -148,8 +144,7 @@
PSC_AC97MSK_TO | PSC_AC97MSK_TU | \
PSC_AC97MSK_RD | PSC_AC97MSK_TD)
-/* AC97 Protocol Control Register.
-*/
+/* AC97 Protocol Control Register. */
#define PSC_AC97PCR_RC (1 << 6)
#define PSC_AC97PCR_RP (1 << 5)
#define PSC_AC97PCR_RS (1 << 4)
@@ -157,8 +152,7 @@
#define PSC_AC97PCR_TP (1 << 1)
#define PSC_AC97PCR_TS (1 << 0)
-/* AC97 Status register (read only).
-*/
+/* AC97 Status register (read only). */
#define PSC_AC97STAT_CB (1 << 26)
#define PSC_AC97STAT_CP (1 << 25)
#define PSC_AC97STAT_CR (1 << 24)
@@ -174,8 +168,7 @@
#define PSC_AC97STAT_DR (1 << 1)
#define PSC_AC97STAT_SR (1 << 0)
-/* AC97 Event Register.
-*/
+/* AC97 Event Register. */
#define PSC_AC97EVNT_GR (1 << 25)
#define PSC_AC97EVNT_CD (1 << 24)
#define PSC_AC97EVNT_RR (1 << 13)
@@ -187,22 +180,18 @@
#define PSC_AC97EVNT_RD (1 << 5)
#define PSC_AC97EVNT_TD (1 << 4)
-/* CODEC Command Register.
-*/
+/* CODEC Command Register. */
#define PSC_AC97CDC_RD (1 << 25)
#define PSC_AC97CDC_ID_MASK (3 << 23)
#define PSC_AC97CDC_INDX_MASK (0x7f << 16)
-#define PSC_AC97CDC_ID(x) (((x) & 0x3) << 23)
+#define PSC_AC97CDC_ID(x) (((x) & 0x03) << 23)
#define PSC_AC97CDC_INDX(x) (((x) & 0x7f) << 16)
-/* AC97 Reset Control Register.
-*/
+/* AC97 Reset Control Register. */
#define PSC_AC97RST_RST (1 << 1)
#define PSC_AC97RST_SNC (1 << 0)
-
-/* PSC in I2S Mode.
-*/
+/* PSC in I2S Mode. */
typedef struct psc_i2s {
u32 psc_sel;
u32 psc_ctrl;
@@ -215,8 +204,7 @@
u32 psc_i2sudf;
} psc_i2s_t;
-/* I2S Config Register.
-*/
+/* I2S Config Register. */
#define PSC_I2SCFG_RT_MASK (3 << 30)
#define PSC_I2SCFG_RT_FIFO1 (0 << 30)
#define PSC_I2SCFG_RT_FIFO2 (1 << 30)
@@ -247,8 +235,7 @@
#define PSC_I2SCFG_MLJ (1 << 10)
#define PSC_I2SCFG_XM (1 << 9)
-/* The word length equation is simply LEN+1.
- */
+/* The word length equation is simply LEN+1. */
#define PSC_I2SCFG_SET_LEN(x) ((((x) - 1) & 0x1f) << 4)
#define PSC_I2SCFG_GET_LEN(x) ((((x) >> 4) & 0x1f) + 1)
@@ -256,8 +243,7 @@
#define PSC_I2SCFG_MLF (1 << 1)
#define PSC_I2SCFG_MS (1 << 0)
-/* I2S Mask Register.
-*/
+/* I2S Mask Register. */
#define PSC_I2SMSK_RR (1 << 13)
#define PSC_I2SMSK_RO (1 << 12)
#define PSC_I2SMSK_RU (1 << 11)
@@ -271,8 +257,7 @@
PSC_I2SMSK_TO | PSC_I2SMSK_TU | \
PSC_I2SMSK_RD | PSC_I2SMSK_TD)
-/* I2S Protocol Control Register.
-*/
+/* I2S Protocol Control Register. */
#define PSC_I2SPCR_RC (1 << 6)
#define PSC_I2SPCR_RP (1 << 5)
#define PSC_I2SPCR_RS (1 << 4)
@@ -280,8 +265,7 @@
#define PSC_I2SPCR_TP (1 << 1)
#define PSC_I2SPCR_TS (1 << 0)
-/* I2S Status register (read only).
-*/
+/* I2S Status register (read only). */
#define PSC_I2SSTAT_RF (1 << 13)
#define PSC_I2SSTAT_RE (1 << 12)
#define PSC_I2SSTAT_RR (1 << 11)
@@ -294,8 +278,7 @@
#define PSC_I2SSTAT_DR (1 << 1)
#define PSC_I2SSTAT_SR (1 << 0)
-/* I2S Event Register.
-*/
+/* I2S Event Register. */
#define PSC_I2SEVNT_RR (1 << 13)
#define PSC_I2SEVNT_RO (1 << 12)
#define PSC_I2SEVNT_RU (1 << 11)
@@ -305,8 +288,7 @@
#define PSC_I2SEVNT_RD (1 << 5)
#define PSC_I2SEVNT_TD (1 << 4)
-/* PSC in SPI Mode.
-*/
+/* PSC in SPI Mode. */
typedef struct psc_spi {
u32 psc_sel;
u32 psc_ctrl;
@@ -318,8 +300,7 @@
u32 psc_spitxrx;
} psc_spi_t;
-/* SPI Config Register.
-*/
+/* SPI Config Register. */
#define PSC_SPICFG_RT_MASK (3 << 30)
#define PSC_SPICFG_RT_FIFO1 (0 << 30)
#define PSC_SPICFG_RT_FIFO2 (1 << 30)
@@ -355,8 +336,7 @@
#define PSC_SPICFG_MLF (1 << 1)
#define PSC_SPICFG_MO (1 << 0)
-/* SPI Mask Register.
-*/
+/* SPI Mask Register. */
#define PSC_SPIMSK_MM (1 << 16)
#define PSC_SPIMSK_RR (1 << 13)
#define PSC_SPIMSK_RO (1 << 12)
@@ -371,16 +351,14 @@
PSC_SPIMSK_TU | PSC_SPIMSK_SD | \
PSC_SPIMSK_MD)
-/* SPI Protocol Control Register.
-*/
+/* SPI Protocol Control Register. */
#define PSC_SPIPCR_RC (1 << 6)
#define PSC_SPIPCR_SP (1 << 5)
#define PSC_SPIPCR_SS (1 << 4)
#define PSC_SPIPCR_TC (1 << 2)
#define PSC_SPIPCR_MS (1 << 0)
-/* SPI Status register (read only).
-*/
+/* SPI Status register (read only). */
#define PSC_SPISTAT_RF (1 << 13)
#define PSC_SPISTAT_RE (1 << 12)
#define PSC_SPISTAT_RR (1 << 11)
@@ -393,8 +371,7 @@
#define PSC_SPISTAT_DR (1 << 1)
#define PSC_SPISTAT_SR (1 << 0)
-/* SPI Event Register.
-*/
+/* SPI Event Register. */
#define PSC_SPIEVNT_MM (1 << 16)
#define PSC_SPIEVNT_RR (1 << 13)
#define PSC_SPIEVNT_RO (1 << 12)
@@ -405,13 +382,11 @@
#define PSC_SPIEVNT_SD (1 << 5)
#define PSC_SPIEVNT_MD (1 << 4)
-/* Transmit register control.
-*/
+/* Transmit register control. */
#define PSC_SPITXRX_LC (1 << 29)
#define PSC_SPITXRX_SR (1 << 28)
-/* PSC in SMBus (I2C) Mode.
-*/
+/* PSC in SMBus (I2C) Mode. */
typedef struct psc_smb {
u32 psc_sel;
u32 psc_ctrl;
@@ -424,8 +399,7 @@
u32 psc_smbtmr;
} psc_smb_t;
-/* SMBus Config Register.
-*/
+/* SMBus Config Register. */
#define PSC_SMBCFG_RT_MASK (3 << 30)
#define PSC_SMBCFG_RT_FIFO1 (0 << 30)
#define PSC_SMBCFG_RT_FIFO2 (1 << 30)
@@ -452,8 +426,7 @@
#define PSC_SMBCFG_SET_SLV(x) (((x) & 0x7f) << 1)
-/* SMBus Mask Register.
-*/
+/* SMBus Mask Register. */
#define PSC_SMBMSK_DN (1 << 30)
#define PSC_SMBMSK_AN (1 << 29)
#define PSC_SMBMSK_AL (1 << 28)
@@ -471,13 +444,11 @@
PSC_SMBMSK_TU | PSC_SMBMSK_SD | \
PSC_SMBMSK_MD)
-/* SMBus Protocol Control Register.
-*/
+/* SMBus Protocol Control Register. */
#define PSC_SMBPCR_DC (1 << 2)
#define PSC_SMBPCR_MS (1 << 0)
-/* SMBus Status register (read only).
-*/
+/* SMBus Status register (read only). */
#define PSC_SMBSTAT_BB (1 << 28)
#define PSC_SMBSTAT_RF (1 << 13)
#define PSC_SMBSTAT_RE (1 << 12)
@@ -491,8 +462,7 @@
#define PSC_SMBSTAT_DR (1 << 1)
#define PSC_SMBSTAT_SR (1 << 0)
-/* SMBus Event Register.
-*/
+/* SMBus Event Register. */
#define PSC_SMBEVNT_DN (1 << 30)
#define PSC_SMBEVNT_AN (1 << 29)
#define PSC_SMBEVNT_AL (1 << 28)
@@ -510,15 +480,13 @@
PSC_SMBEVNT_TU | PSC_SMBEVNT_SD | \
PSC_SMBEVNT_MD)
-/* Transmit register control.
-*/
+/* Transmit register control. */
#define PSC_SMBTXRX_RSR (1 << 28)
#define PSC_SMBTXRX_STP (1 << 29)
-#define PSC_SMBTXRX_DATAMASK (0xff)
+#define PSC_SMBTXRX_DATAMASK 0xff
-/* SMBus protocol timers register.
-*/
-#define PSC_SMBTMR_SET_TH(x) (((x) & 0x3) << 30)
+/* SMBus protocol timers register. */
+#define PSC_SMBTMR_SET_TH(x) (((x) & 0x03) << 30)
#define PSC_SMBTMR_SET_PS(x) (((x) & 0x1f) << 25)
#define PSC_SMBTMR_SET_PU(x) (((x) & 0x1f) << 20)
#define PSC_SMBTMR_SET_SH(x) (((x) & 0x1f) << 15)
@@ -526,5 +494,4 @@
#define PSC_SMBTMR_SET_CL(x) (((x) & 0x1f) << 5)
#define PSC_SMBTMR_SET_CH(x) (((x) & 0x1f) << 0)
-
#endif /* _AU1000_PSC_H_ */
diff --git a/include/asm-mips/mach-db1x00/db1200.h b/include/asm-mips/mach-db1x00/db1200.h
index eedd048..27f2610 100644
--- a/include/asm-mips/mach-db1x00/db1200.h
+++ b/include/asm-mips/mach-db1x00/db1200.h
@@ -1,6 +1,6 @@
/*
- * AMD Alchemy DB1200 Referrence Board
- * Board Registers defines.
+ * AMD Alchemy DBAu1200 Reference Board
+ * Board register defines.
*
* ########################################################################
*
@@ -27,26 +27,25 @@
#include <linux/types.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
-// This is defined in au1000.h with bogus value
-#undef AU1X00_EXTERNAL_INT
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
-
-/* SPI and SMB are muxed on the Pb1200 board.
- Refer to board documentation.
+/*
+ * SPI and SMB are muxed on the DBAu1200 board.
+ * Refer to board documentation.
*/
-#define SPI_PSC_BASE PSC0_BASE_ADDR
-#define SMBUS_PSC_BASE PSC0_BASE_ADDR
-/* AC97 and I2S are muxed on the Pb1200 board.
- Refer to board documentation.
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE PSC0_BASE_ADDR
+/*
+ * AC'97 and I2S are muxed on the DBAu1200 board.
+ * Refer to board documentation.
*/
-#define AC97_PSC_BASE PSC1_BASE_ADDR
+#define AC97_PSC_BASE PSC1_BASE_ADDR
#define I2S_PSC_BASE PSC1_BASE_ADDR
-#define BCSR_KSEG1_ADDR 0xB9800000
+#define BCSR_KSEG1_ADDR 0xB9800000
typedef volatile struct
{
@@ -102,9 +101,9 @@
#define BCSR_STATUS_SWAPBOOT 0x0040
#define BCSR_STATUS_FLASHBUSY 0x0100
#define BCSR_STATUS_IDECBLID 0x0200
-#define BCSR_STATUS_SD0WP 0x0400
-#define BCSR_STATUS_U0RXD 0x1000
-#define BCSR_STATUS_U1RXD 0x2000
+#define BCSR_STATUS_SD0WP 0x0400
+#define BCSR_STATUS_U0RXD 0x1000
+#define BCSR_STATUS_U1RXD 0x2000
#define BCSR_SWITCHES_OCTAL 0x00FF
#define BCSR_SWITCHES_DIP_1 0x0080
@@ -122,8 +121,8 @@
#define BCSR_RESETS_DC 0x0004
#define BCSR_RESETS_IDE 0x0008
#define BCSR_RESETS_TV 0x0010
-/* not resets but in the same register */
-#define BCSR_RESETS_PWMR1mUX 0x0800
+/* Not resets but in the same register */
+#define BCSR_RESETS_PWMR1MUX 0x0800
#define BCSR_RESETS_PCS0MUX 0x1000
#define BCSR_RESETS_PCS1MUX 0x2000
#define BCSR_RESETS_SPISEL 0x4000
@@ -160,7 +159,7 @@
#define BCSR_INT_PC0STSCHG 0x0008
#define BCSR_INT_PC1 0x0010
#define BCSR_INT_PC1STSCHG 0x0020
-#define BCSR_INT_DC 0x0040
+#define BCSR_INT_DC 0x0040
#define BCSR_INT_FLASHBUSY 0x0080
#define BCSR_INT_PC0INSERT 0x0100
#define BCSR_INT_PC0EJECT 0x0200
@@ -179,10 +178,10 @@
#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1
#define IDE_RQSIZE 128
-#define NAND_PHYS_ADDR 0x20000000
+#define NAND_PHYS_ADDR 0x20000000
/*
- * External Interrupts for Pb1200 as of 8/6/2004.
+ * External Interrupts for DBAu1200 as of 8/6/2004.
* Bit positions in the CPLD registers can be calculated by taking
* the interrupt define and subtracting the DB1200_INT_BEGIN value.
*
@@ -211,23 +210,21 @@
};
-/* For drivers/pcmcia/au1000_db1x00.c */
-
-/* PCMCIA Db1x00 specific defines */
-
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+/*
+ * DBAu1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
+ */
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
- ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-#define BOARD_PC0_INT DB1200_PC0_INT
-#define BOARD_PC1_INT DB1200_PC1_INT
-#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
+#define BOARD_PC0_INT DB1200_PC0_INT
+#define BOARD_PC1_INT DB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
-/* Nand chip select */
+/* NAND chip select */
#define NAND_CS 1
#endif /* __ASM_DB1200_H */
-
diff --git a/include/asm-mips/mach-db1x00/db1x00.h b/include/asm-mips/mach-db1x00/db1x00.h
index e7a88ba3..612ae90 100644
--- a/include/asm-mips/mach-db1x00/db1x00.h
+++ b/include/asm-mips/mach-db1x00/db1x00.h
@@ -1,9 +1,8 @@
/*
- * AMD Alchemy DB1x00 Reference Boards
+ * AMD Alchemy DBAu1x00 Reference Boards
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
* Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
*
* ########################################################################
@@ -32,26 +31,26 @@
#ifdef CONFIG_MIPS_DB1550
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
-#define SPI_PSC_BASE PSC0_BASE_ADDR
-#define AC97_PSC_BASE PSC1_BASE_ADDR
-#define SMBUS_PSC_BASE PSC2_BASE_ADDR
-#define I2S_PSC_BASE PSC3_BASE_ADDR
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define AC97_PSC_BASE PSC1_BASE_ADDR
+#define SMBUS_PSC_BASE PSC2_BASE_ADDR
+#define I2S_PSC_BASE PSC3_BASE_ADDR
-#define BCSR_KSEG1_ADDR 0xAF000000
-#define NAND_PHYS_ADDR 0x20000000
+#define BCSR_KSEG1_ADDR 0xAF000000
+#define NAND_PHYS_ADDR 0x20000000
#else
#define BCSR_KSEG1_ADDR 0xAE000000
#endif
/*
- * Overlay data structure of the Db1x00 board registers.
- * Registers located at physical 0E0000xx, KSEG1 0xAE0000xx
+ * Overlay data structure of the DBAu1x00 board registers.
+ * Registers are located at physical 0E0000xx, KSEG1 0xAE0000xx.
*/
typedef volatile struct
{
@@ -138,18 +137,19 @@
#define BCSR_SWRESET_RESET 0x0080
-/* PCMCIA Db1x00 specific defines */
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+/* PCMCIA DBAu1x00 specific defines */
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
#define SET_VCC_VPP(VCC, VPP, SLOT)\
- ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-/* SD controller macros */
/*
- * Detect card.
+ * SD controller macros
*/
+
+/* Detect card. */
#define mmc_card_inserted(_n_, _res_) \
do { \
BCSR * const bcsr = (BCSR *)0xAE000000; \
@@ -176,10 +176,10 @@
unsigned long mmc_pwr, mmc_wp, board_specific; \
if ((_n_)) { \
mmc_pwr = BCSR_BOARD_SD1_PWR; \
- mmc_wp = BCSR_BOARD_SD1_WP; \
+ mmc_wp = BCSR_BOARD_SD1_WP; \
} else { \
mmc_pwr = BCSR_BOARD_SD0_PWR; \
- mmc_wp = BCSR_BOARD_SD0_WP; \
+ mmc_wp = BCSR_BOARD_SD0_WP; \
} \
board_specific = au_readl((unsigned long)(&bcsr->specific)); \
if (!(board_specific & mmc_wp)) {/* low means card present */ \
@@ -190,17 +190,19 @@
} while (0)
-/* NAND defines */
-/* Timing values as described in databook, * ns value stripped of
+/*
+ * NAND defines
+ *
+ * Timing values as described in databook, * ns value stripped of the
* lower 2 bits.
- * These defines are here rather than an SOC1550 generic file because
+ * These defines are here rather than an Au1550 generic file because
* the parts chosen on another board may be different and may require
* different timings.
*/
-#define NAND_T_H (18 >> 2)
-#define NAND_T_PUL (30 >> 2)
-#define NAND_T_SU (30 >> 2)
-#define NAND_T_WH (30 >> 2)
+#define NAND_T_H (18 >> 2)
+#define NAND_T_PUL (30 >> 2)
+#define NAND_T_SU (30 >> 2)
+#define NAND_T_WH (30 >> 2)
/* Bitfield shift amounts */
#define NAND_T_H_SHIFT 0
@@ -208,16 +210,15 @@
#define NAND_T_SU_SHIFT 8
#define NAND_T_WH_SHIFT 12
-#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
- ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
- ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
- ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)
-#define NAND_CS 1
+#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
+ ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+ ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
+ ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT))
+#define NAND_CS 1
-/* should be done by yamon */
-#define NAND_STCFG 0x00400005 /* 8-bit NAND */
-#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */
-#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
+/* Should be done by YAMON */
+#define NAND_STCFG 0x00400005 /* 8-bit NAND */
+#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */
+#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
#endif /* __ASM_DB1X00_H */
-
diff --git a/include/asm-mips/mach-pb1x00/pb1000.h b/include/asm-mips/mach-pb1x00/pb1000.h
index b52e0e7..6d1ff90 100644
--- a/include/asm-mips/mach-pb1x00/pb1000.h
+++ b/include/asm-mips/mach-pb1x00/pb1000.h
@@ -1,9 +1,8 @@
/*
- * Alchemy Semi PB1000 Referrence Board
+ * Alchemy Semi Pb1000 Referrence Board
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* ########################################################################
*
@@ -28,145 +27,61 @@
#define __ASM_PB1000_H
/* PCMCIA PB1000 specific defines */
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-#define PB1000_PCR 0xBE000000
-# define PCR_SLOT_0_VPP0 (1<<0)
-# define PCR_SLOT_0_VPP1 (1<<1)
-# define PCR_SLOT_0_VCC0 (1<<2)
-# define PCR_SLOT_0_VCC1 (1<<3)
-# define PCR_SLOT_0_RST (1<<4)
+#define PB1000_PCR 0xBE000000
+# define PCR_SLOT_0_VPP0 (1 << 0)
+# define PCR_SLOT_0_VPP1 (1 << 1)
+# define PCR_SLOT_0_VCC0 (1 << 2)
+# define PCR_SLOT_0_VCC1 (1 << 3)
+# define PCR_SLOT_0_RST (1 << 4)
+# define PCR_SLOT_1_VPP0 (1 << 8)
+# define PCR_SLOT_1_VPP1 (1 << 9)
+# define PCR_SLOT_1_VCC0 (1 << 10)
+# define PCR_SLOT_1_VCC1 (1 << 11)
+# define PCR_SLOT_1_RST (1 << 12)
-# define PCR_SLOT_1_VPP0 (1<<8)
-# define PCR_SLOT_1_VPP1 (1<<9)
-# define PCR_SLOT_1_VCC0 (1<<10)
-# define PCR_SLOT_1_VCC1 (1<<11)
-# define PCR_SLOT_1_RST (1<<12)
+#define PB1000_MDR 0xBE000004
+# define MDR_PI (1 << 5) /* PCMCIA int latch */
+# define MDR_EPI (1 << 14) /* enable PCMCIA int */
+# define MDR_CPI (1 << 15) /* clear PCMCIA int */
-#define PB1000_MDR 0xBE000004
-# define MDR_PI (1<<5) /* pcmcia int latch */
-# define MDR_EPI (1<<14) /* enable pcmcia int */
-# define MDR_CPI (1<<15) /* clear pcmcia int */
+#define PB1000_ACR1 0xBE000008
+# define ACR1_SLOT_0_CD1 (1 << 0) /* card detect 1 */
+# define ACR1_SLOT_0_CD2 (1 << 1) /* card detect 2 */
+# define ACR1_SLOT_0_READY (1 << 2) /* ready */
+# define ACR1_SLOT_0_STATUS (1 << 3) /* status change */
+# define ACR1_SLOT_0_VS1 (1 << 4) /* voltage sense 1 */
+# define ACR1_SLOT_0_VS2 (1 << 5) /* voltage sense 2 */
+# define ACR1_SLOT_0_INPACK (1 << 6) /* inpack pin status */
+# define ACR1_SLOT_1_CD1 (1 << 8) /* card detect 1 */
+# define ACR1_SLOT_1_CD2 (1 << 9) /* card detect 2 */
+# define ACR1_SLOT_1_READY (1 << 10) /* ready */
+# define ACR1_SLOT_1_STATUS (1 << 11) /* status change */
+# define ACR1_SLOT_1_VS1 (1 << 12) /* voltage sense 1 */
+# define ACR1_SLOT_1_VS2 (1 << 13) /* voltage sense 2 */
+# define ACR1_SLOT_1_INPACK (1 << 14) /* inpack pin status */
-#define PB1000_ACR1 0xBE000008
-# define ACR1_SLOT_0_CD1 (1<<0) /* card detect 1 */
-# define ACR1_SLOT_0_CD2 (1<<1) /* card detect 2 */
-# define ACR1_SLOT_0_READY (1<<2) /* ready */
-# define ACR1_SLOT_0_STATUS (1<<3) /* status change */
-# define ACR1_SLOT_0_VS1 (1<<4) /* voltage sense 1 */
-# define ACR1_SLOT_0_VS2 (1<<5) /* voltage sense 2 */
-# define ACR1_SLOT_0_INPACK (1<<6) /* inpack pin status */
-# define ACR1_SLOT_1_CD1 (1<<8) /* card detect 1 */
-# define ACR1_SLOT_1_CD2 (1<<9) /* card detect 2 */
-# define ACR1_SLOT_1_READY (1<<10) /* ready */
-# define ACR1_SLOT_1_STATUS (1<<11) /* status change */
-# define ACR1_SLOT_1_VS1 (1<<12) /* voltage sense 1 */
-# define ACR1_SLOT_1_VS2 (1<<13) /* voltage sense 2 */
-# define ACR1_SLOT_1_INPACK (1<<14) /* inpack pin status */
-
-#define CPLD_AUX0 0xBE00000C
-#define CPLD_AUX1 0xBE000010
-#define CPLD_AUX2 0xBE000014
+#define CPLD_AUX0 0xBE00000C
+#define CPLD_AUX1 0xBE000010
+#define CPLD_AUX2 0xBE000014
/* Voltage levels */
/* VPPEN1 - VPPEN0 */
-#define VPP_GND ((0<<1) | (0<<0))
-#define VPP_5V ((1<<1) | (0<<0))
-#define VPP_3V ((0<<1) | (1<<0))
-#define VPP_12V ((0<<1) | (1<<0))
-#define VPP_HIZ ((1<<1) | (1<<0))
+#define VPP_GND ((0 << 1) | (0 << 0))
+#define VPP_5V ((1 << 1) | (0 << 0))
+#define VPP_3V ((0 << 1) | (1 << 0))
+#define VPP_12V ((0 << 1) | (1 << 0))
+#define VPP_HIZ ((1 << 1) | (1 << 0))
/* VCCEN1 - VCCEN0 */
-#define VCC_3V ((0<<1) | (1<<0))
-#define VCC_5V ((1<<1) | (0<<0))
-#define VCC_HIZ ((0<<1) | (0<<0))
+#define VCC_3V ((0 << 1) | (1 << 0))
+#define VCC_5V ((1 << 1) | (0 << 0))
+#define VCC_HIZ ((0 << 1) | (0 << 0))
/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
- ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
-
-
-/* PCI PB1000 specific defines */
-/* The reason these defines are here instead of au1000.h is because
- * the Au1000 does not have a PCI bus controller so the PCI implementation
- * on the some of the older Pb1000 boards was very board specific.
- */
-#define PCI_CONFIG_BASE 0xBA020000 /* the only external slot */
-
-#define SDRAM_DEVID 0xBA010000
-#define SDRAM_CMD 0xBA010004
-#define SDRAM_CLASS 0xBA010008
-#define SDRAM_MISC 0xBA01000C
-#define SDRAM_MBAR 0xBA010010
-
-#define PCI_IO_DATA_PORT 0xBA800000
-
-#define PCI_IO_ADDR 0xBE00001C
-#define PCI_INT_ACK 0xBBC00000
-#define PCI_IO_READ 0xBBC00020
-#define PCI_IO_WRITE 0xBBC00030
-
-#define PCI_BRIDGE_CONFIG 0xBE000018
-
-#define PCI_IO_START 0x10000000
-#define PCI_IO_END 0x1000ffff
-#define PCI_MEM_START 0x18000000
-#define PCI_MEM_END 0x18ffffff
-
-#define PCI_FIRST_DEVFN 0
-#define PCI_LAST_DEVFN 1
-
-static inline u8 au_pci_io_readb(u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG);
- return (readl(PCI_IO_DATA_PORT) & 0xff);
-}
-
-static inline u16 au_pci_io_readw(u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG);
- return (readl(PCI_IO_DATA_PORT) & 0xffff);
-}
-
-static inline u32 au_pci_io_readl(u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff), PCI_BRIDGE_CONFIG);
- return readl(PCI_IO_DATA_PORT);
-}
-
-static inline void au_pci_io_writeb(u8 val, u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG);
- writel(val, PCI_IO_DATA_PORT);
-}
-
-static inline void au_pci_io_writew(u16 val, u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG);
- writel(val, PCI_IO_DATA_PORT);
-}
-
-static inline void au_pci_io_writel(u32 val, u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel(readl(PCI_BRIDGE_CONFIG) & 0xffffcfff, PCI_BRIDGE_CONFIG);
- writel(val, PCI_IO_DATA_PORT);
-}
-
-static inline void set_sdram_extbyte(void)
-{
- writel(readl(PCI_BRIDGE_CONFIG) & 0xffffff00, PCI_BRIDGE_CONFIG);
-}
-
-static inline void set_slot_extbyte(void)
-{
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffbf00) | 0x18, PCI_BRIDGE_CONFIG);
-}
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
#endif /* __ASM_PB1000_H */
diff --git a/include/asm-mips/mach-pb1x00/pb1100.h b/include/asm-mips/mach-pb1x00/pb1100.h
index 63aa392..b1a60f1 100644
--- a/include/asm-mips/mach-pb1x00/pb1100.h
+++ b/include/asm-mips/mach-pb1x00/pb1100.h
@@ -1,9 +1,8 @@
/*
- * Alchemy Semi PB1100 Referrence Board
+ * Alchemy Semi Pb1100 Referrence Board
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* ########################################################################
*
@@ -27,59 +26,60 @@
#ifndef __ASM_PB1100_H
#define __ASM_PB1100_H
-#define PB1100_IDENT 0xAE000000
-#define BOARD_STATUS_REG 0xAE000004
-# define PB1100_ROM_SEL (1<<15)
-# define PB1100_ROM_SIZ (1<<14)
-# define PB1100_SWAP_BOOT (1<<13)
-# define PB1100_FLASH_WP (1<<12)
-# define PB1100_ROM_H_STS (1<<11)
-# define PB1100_ROM_L_STS (1<<10)
-# define PB1100_FLASH_H_STS (1<<9)
-# define PB1100_FLASH_L_STS (1<<8)
-# define PB1100_SRAM_SIZ (1<<7)
-# define PB1100_TSC_BUSY (1<<6)
-# define PB1100_PCMCIA_VS_MASK (3<<4)
-# define PB1100_RS232_CD (1<<3)
-# define PB1100_RS232_CTS (1<<2)
-# define PB1100_RS232_DSR (1<<1)
-# define PB1100_RS232_RI (1<<0)
+#define PB1100_IDENT 0xAE000000
+#define BOARD_STATUS_REG 0xAE000004
+# define PB1100_ROM_SEL (1 << 15)
+# define PB1100_ROM_SIZ (1 << 14)
+# define PB1100_SWAP_BOOT (1 << 13)
+# define PB1100_FLASH_WP (1 << 12)
+# define PB1100_ROM_H_STS (1 << 11)
+# define PB1100_ROM_L_STS (1 << 10)
+# define PB1100_FLASH_H_STS (1 << 9)
+# define PB1100_FLASH_L_STS (1 << 8)
+# define PB1100_SRAM_SIZ (1 << 7)
+# define PB1100_TSC_BUSY (1 << 6)
+# define PB1100_PCMCIA_VS_MASK (3 << 4)
+# define PB1100_RS232_CD (1 << 3)
+# define PB1100_RS232_CTS (1 << 2)
+# define PB1100_RS232_DSR (1 << 1)
+# define PB1100_RS232_RI (1 << 0)
-#define PB1100_IRDA_RS232 0xAE00000C
-# define PB1100_IRDA_FULL (0<<14) /* full power */
-# define PB1100_IRDA_SHUTDOWN (1<<14)
-# define PB1100_IRDA_TT (2<<14) /* 2/3 power */
-# define PB1100_IRDA_OT (3<<14) /* 1/3 power */
-# define PB1100_IRDA_FIR (1<<13)
+#define PB1100_IRDA_RS232 0xAE00000C
+# define PB1100_IRDA_FULL (0 << 14) /* full power */
+# define PB1100_IRDA_SHUTDOWN (1 << 14)
+# define PB1100_IRDA_TT (2 << 14) /* 2/3 power */
+# define PB1100_IRDA_OT (3 << 14) /* 1/3 power */
+# define PB1100_IRDA_FIR (1 << 13)
-#define PCMCIA_BOARD_REG 0xAE000010
-# define PB1100_SD_WP1_RO (1<<15) /* read only */
-# define PB1100_SD_WP0_RO (1<<14) /* read only */
-# define PB1100_SD_PWR1 (1<<11) /* applies power to SD1 */
-# define PB1100_SD_PWR0 (1<<10) /* applies power to SD0 */
-# define PB1100_SEL_SD_CONN1 (1<<9)
-# define PB1100_SEL_SD_CONN0 (1<<8)
-# define PC_DEASSERT_RST (1<<7)
-# define PC_DRV_EN (1<<4)
+#define PCMCIA_BOARD_REG 0xAE000010
+# define PB1100_SD_WP1_RO (1 << 15) /* read only */
+# define PB1100_SD_WP0_RO (1 << 14) /* read only */
+# define PB1100_SD_PWR1 (1 << 11) /* applies power to SD1 */
+# define PB1100_SD_PWR0 (1 << 10) /* applies power to SD0 */
+# define PB1100_SEL_SD_CONN1 (1 << 9)
+# define PB1100_SEL_SD_CONN0 (1 << 8)
+# define PC_DEASSERT_RST (1 << 7)
+# define PC_DRV_EN (1 << 4)
-#define PB1100_G_CONTROL 0xAE000014 /* graphics control */
+#define PB1100_G_CONTROL 0xAE000014 /* graphics control */
-#define PB1100_RST_VDDI 0xAE00001C
-# define PB1100_SOFT_RESET (1<<15) /* clear to reset the board */
-# define PB1100_VDDI_MASK (0x1F)
+#define PB1100_RST_VDDI 0xAE00001C
+# define PB1100_SOFT_RESET (1 << 15) /* clear to reset the board */
+# define PB1100_VDDI_MASK 0x1F
-#define PB1100_LEDS 0xAE000018
+#define PB1100_LEDS 0xAE000018
-/* 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED.
- * 7:0 is the LED Display's decimal points.
+/*
+ * 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED.
+ * 7:0 is the LED Display's decimal points.
*/
-#define PB1100_HEX_LED 0xAE000018
+#define PB1100_HEX_LED 0xAE000018
-/* PCMCIA PB1100 specific defines */
-#define PCMCIA_MAX_SOCK 0
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+/* PCMCIA Pb1100 specific defines */
+#define PCMCIA_MAX_SOCK 0
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP) (((VCC)<<2) | ((VPP)<<0))
+#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
#endif /* __ASM_PB1100_H */
diff --git a/include/asm-mips/mach-pb1x00/pb1200.h b/include/asm-mips/mach-pb1x00/pb1200.h
index e2c6bca..c8618df 100644
--- a/include/asm-mips/mach-pb1x00/pb1200.h
+++ b/include/asm-mips/mach-pb1x00/pb1200.h
@@ -1,5 +1,5 @@
/*
- * AMD Alchemy PB1200 Referrence Board
+ * AMD Alchemy Pb1200 Referrence Board
* Board Registers defines.
*
* ########################################################################
@@ -27,21 +27,20 @@
#include <linux/types.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
-// This is defined in au1000.h with bogus value
-#undef AU1X00_EXTERNAL_INT
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
-
-/* SPI and SMB are muxed on the Pb1200 board.
- Refer to board documentation.
+/*
+ * SPI and SMB are muxed on the Pb1200 board.
+ * Refer to board documentation.
*/
-#define SPI_PSC_BASE PSC0_BASE_ADDR
-#define SMBUS_PSC_BASE PSC0_BASE_ADDR
-/* AC97 and I2S are muxed on the Pb1200 board.
- Refer to board documentation.
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE PSC0_BASE_ADDR
+/*
+ * AC97 and I2S are muxed on the Pb1200 board.
+ * Refer to board documentation.
*/
#define AC97_PSC_BASE PSC1_BASE_ADDR
#define I2S_PSC_BASE PSC1_BASE_ADDR
@@ -102,10 +101,10 @@
#define BCSR_STATUS_SWAPBOOT 0x0040
#define BCSR_STATUS_FLASHBUSY 0x0100
#define BCSR_STATUS_IDECBLID 0x0200
-#define BCSR_STATUS_SD0WP 0x0400
-#define BCSR_STATUS_SD1WP 0x0800
-#define BCSR_STATUS_U0RXD 0x1000
-#define BCSR_STATUS_U1RXD 0x2000
+#define BCSR_STATUS_SD0WP 0x0400
+#define BCSR_STATUS_SD1WP 0x0800
+#define BCSR_STATUS_U0RXD 0x1000
+#define BCSR_STATUS_U1RXD 0x2000
#define BCSR_SWITCHES_OCTAL 0x00FF
#define BCSR_SWITCHES_DIP_1 0x0080
@@ -123,11 +122,11 @@
#define BCSR_RESETS_DC 0x0004
#define BCSR_RESETS_IDE 0x0008
/* not resets but in the same register */
-#define BCSR_RESETS_WSCFSM 0x0800
+#define BCSR_RESETS_WSCFSM 0x0800
#define BCSR_RESETS_PCS0MUX 0x1000
#define BCSR_RESETS_PCS1MUX 0x2000
#define BCSR_RESETS_SPISEL 0x4000
-#define BCSR_RESETS_SD1MUX 0x8000
+#define BCSR_RESETS_SD1MUX 0x8000
#define BCSR_PCMCIA_PC0VPP 0x0003
#define BCSR_PCMCIA_PC0VCC 0x000C
@@ -163,7 +162,7 @@
#define BCSR_INT_PC0STSCHG 0x0008
#define BCSR_INT_PC1 0x0010
#define BCSR_INT_PC1STSCHG 0x0020
-#define BCSR_INT_DC 0x0040
+#define BCSR_INT_DC 0x0040
#define BCSR_INT_FLASHBUSY 0x0080
#define BCSR_INT_PC0INSERT 0x0100
#define BCSR_INT_PC0EJECT 0x0200
@@ -174,14 +173,6 @@
#define BCSR_INT_SD1INSERT 0x4000
#define BCSR_INT_SD1EJECT 0x8000
-/* PCMCIA Db1x00 specific defines */
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
- ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
-
#define SMC91C111_PHYS_ADDR 0x0D000300
#define SMC91C111_INT PB1200_ETH_INT
@@ -192,18 +183,19 @@
#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1
#define IDE_RQSIZE 128
-#define NAND_PHYS_ADDR 0x1C000000
+#define NAND_PHYS_ADDR 0x1C000000
-/* Timing values as described in databook, * ns value stripped of
+/*
+ * Timing values as described in databook, * ns value stripped of
* lower 2 bits.
- * These defines are here rather than an SOC1200 generic file because
+ * These defines are here rather than an Au1200 generic file because
* the parts chosen on another board may be different and may require
* different timings.
*/
-#define NAND_T_H (18 >> 2)
-#define NAND_T_PUL (30 >> 2)
-#define NAND_T_SU (30 >> 2)
-#define NAND_T_WH (30 >> 2)
+#define NAND_T_H (18 >> 2)
+#define NAND_T_PUL (30 >> 2)
+#define NAND_T_SU (30 >> 2)
+#define NAND_T_WH (30 >> 2)
/* Bitfield shift amounts */
#define NAND_T_H_SHIFT 0
@@ -211,11 +203,10 @@
#define NAND_T_SU_SHIFT 8
#define NAND_T_WH_SHIFT 12
-#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
- ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
- ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
- ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)
-
+#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
+ ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+ ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
+ ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT))
/*
* External Interrupts for Pb1200 as of 8/6/2004.
@@ -248,13 +239,21 @@
PB1200_INT_END = PB1200_INT_BEGIN + 15
};
-/* For drivers/pcmcia/au1000_db1x00.c */
-#define BOARD_PC0_INT PB1200_PC0_INT
-#define BOARD_PC1_INT PB1200_PC1_INT
-#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
+/*
+ * Pb1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
+ */
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-/* Nand chip select */
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
+
+#define BOARD_PC0_INT PB1200_PC0_INT
+#define BOARD_PC1_INT PB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
+
+/* NAND chip select */
#define NAND_CS 1
#endif /* __ASM_PB1200_H */
-
diff --git a/include/asm-mips/mach-pb1x00/pb1500.h b/include/asm-mips/mach-pb1x00/pb1500.h
index ff6d40c..da51a2e 100644
--- a/include/asm-mips/mach-pb1x00/pb1500.h
+++ b/include/asm-mips/mach-pb1x00/pb1500.h
@@ -1,9 +1,8 @@
/*
- * Alchemy Semi PB1500 Referrence Board
+ * Alchemy Semi Pb1500 Referrence Board
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* ########################################################################
*
@@ -27,25 +26,24 @@
#ifndef __ASM_PB1500_H
#define __ASM_PB1500_H
+#define IDENT_BOARD_REG 0xAE000000
+#define BOARD_STATUS_REG 0xAE000004
+#define PCI_BOARD_REG 0xAE000010
+#define PCMCIA_BOARD_REG 0xAE000010
+# define PC_DEASSERT_RST 0x80
+# define PC_DRV_EN 0x10
+#define PB1500_G_CONTROL 0xAE000014
+#define PB1500_RST_VDDI 0xAE00001C
+#define PB1500_LEDS 0xAE000018
-#define IDENT_BOARD_REG 0xAE000000
-#define BOARD_STATUS_REG 0xAE000004
-#define PCI_BOARD_REG 0xAE000010
-#define PCMCIA_BOARD_REG 0xAE000010
- #define PC_DEASSERT_RST 0x80
- #define PC_DRV_EN 0x10
-#define PB1500_G_CONTROL 0xAE000014
-#define PB1500_RST_VDDI 0xAE00001C
-#define PB1500_LEDS 0xAE000018
+#define PB1500_HEX_LED 0xAF000004
+#define PB1500_HEX_LED_BLANK 0xAF000008
-#define PB1500_HEX_LED 0xAF000004
-#define PB1500_HEX_LED_BLANK 0xAF000008
-
-/* PCMCIA PB1500 specific defines */
-#define PCMCIA_MAX_SOCK 0
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+/* PCMCIA Pb1500 specific defines */
+#define PCMCIA_MAX_SOCK 0
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP) (((VCC)<<2) | ((VPP)<<0))
+#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
#endif /* __ASM_PB1500_H */
diff --git a/include/asm-mips/mach-pb1x00/pb1550.h b/include/asm-mips/mach-pb1x00/pb1550.h
index c2ab0e2d..6704a11 100644
--- a/include/asm-mips/mach-pb1x00/pb1550.h
+++ b/include/asm-mips/mach-pb1x00/pb1550.h
@@ -30,15 +30,15 @@
#include <linux/types.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
-#define SPI_PSC_BASE PSC0_BASE_ADDR
-#define AC97_PSC_BASE PSC1_BASE_ADDR
-#define SMBUS_PSC_BASE PSC2_BASE_ADDR
-#define I2S_PSC_BASE PSC3_BASE_ADDR
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define AC97_PSC_BASE PSC1_BASE_ADDR
+#define SMBUS_PSC_BASE PSC2_BASE_ADDR
+#define I2S_PSC_BASE PSC3_BASE_ADDR
#define BCSR_PHYS_ADDR 0xAF000000
@@ -129,12 +129,12 @@
#define BCSR_SYSTEM_POWEROFF 0x4000
#define BCSR_SYSTEM_RESET 0x8000
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
- ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
#if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
#define PB1550_BOTH_BANKS
@@ -144,16 +144,17 @@
#define PB1550_USER_ONLY
#endif
-/* Timing values as described in databook, * ns value stripped of
+/*
+ * Timing values as described in databook, * ns value stripped of
* lower 2 bits.
* These defines are here rather than an SOC1550 generic file because
* the parts chosen on another board may be different and may require
* different timings.
*/
-#define NAND_T_H (18 >> 2)
-#define NAND_T_PUL (30 >> 2)
-#define NAND_T_SU (30 >> 2)
-#define NAND_T_WH (30 >> 2)
+#define NAND_T_H (18 >> 2)
+#define NAND_T_PUL (30 >> 2)
+#define NAND_T_SU (30 >> 2)
+#define NAND_T_WH (30 >> 2)
/* Bitfield shift amounts */
#define NAND_T_H_SHIFT 0
@@ -161,16 +162,16 @@
#define NAND_T_SU_SHIFT 8
#define NAND_T_WH_SHIFT 12
-#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
- ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
- ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
- ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)
+#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
+ ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+ ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
+ ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT))
#define NAND_CS 1
-/* should be done by yamon */
-#define NAND_STCFG 0x00400005 /* 8-bit NAND */
-#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */
-#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
+/* Should be done by YAMON */
+#define NAND_STCFG 0x00400005 /* 8-bit NAND */
+#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */
+#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
#endif /* __ASM_PB1550_H */
diff --git a/include/asm-mips/rtlx.h b/include/asm-mips/rtlx.h
index 65778c8..20b6660 100644
--- a/include/asm-mips/rtlx.h
+++ b/include/asm-mips/rtlx.h
@@ -29,13 +29,13 @@
extern unsigned int rtlx_write_poll(int index);
enum rtlx_state {
- RTLX_STATE_UNUSED,
+ RTLX_STATE_UNUSED = 0,
RTLX_STATE_INITIALISED,
RTLX_STATE_REMOTE_READY,
RTLX_STATE_OPENED
};
-#define RTLX_BUFFER_SIZE 1024
+#define RTLX_BUFFER_SIZE 2048
/* each channel supports read and write.
linux (vpe0) reads lx_buffer and writes rt_buffer
diff --git a/include/asm-mips/types.h b/include/asm-mips/types.h
index 2dd147f5..bcbb8d6 100644
--- a/include/asm-mips/types.h
+++ b/include/asm-mips/types.h
@@ -9,38 +9,16 @@
#ifndef _ASM_TYPES_H
#define _ASM_TYPES_H
+#if _MIPS_SZLONG == 64
+# include <asm-generic/int-l64.h>
+#else
+# include <asm-generic/int-ll64.h>
+#endif
+
#ifndef __ASSEMBLY__
typedef unsigned short umode_t;
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if (_MIPS_SZLONG == 64)
-
-typedef __signed__ long __s64;
-typedef unsigned long __u64;
-
-#else
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
-#endif
-
#endif /* __ASSEMBLY__ */
/*
@@ -52,30 +30,6 @@
#ifndef __ASSEMBLY__
-
-typedef __signed char s8;
-typedef unsigned char u8;
-
-typedef __signed short s16;
-typedef unsigned short u16;
-
-typedef __signed int s32;
-typedef unsigned int u32;
-
-#if (_MIPS_SZLONG == 64)
-
-typedef __signed__ long s64;
-typedef unsigned long u64;
-
-#else
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-typedef __signed__ long long s64;
-typedef unsigned long long u64;
-#endif
-
-#endif
-
#if (defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) \
|| defined(CONFIG_64BIT)
typedef u64 dma_addr_t;
diff --git a/include/asm-mn10300/div64.h b/include/asm-mn10300/div64.h
index bf9c515..3a8329b 100644
--- a/include/asm-mn10300/div64.h
+++ b/include/asm-mn10300/div64.h
@@ -97,7 +97,4 @@
return result;
}
-extern __attribute__((const))
-uint64_t div64_64(uint64_t dividend, uint64_t divisor);
-
#endif /* _ASM_DIV64 */
diff --git a/include/asm-mn10300/processor.h b/include/asm-mn10300/processor.h
index f1b081f..7323927 100644
--- a/include/asm-mn10300/processor.h
+++ b/include/asm-mn10300/processor.h
@@ -58,7 +58,7 @@
extern void identify_cpu(struct mn10300_cpuinfo *);
extern void print_cpu_info(struct mn10300_cpuinfo *);
extern void dodgy_tsc(void);
-#define cpu_relax() do {} while (0)
+#define cpu_relax() barrier()
/*
* User space process size: 1.75GB (default).
diff --git a/include/asm-mn10300/types.h b/include/asm-mn10300/types.h
index d40ea76..7b9f010 100644
--- a/include/asm-mn10300/types.h
+++ b/include/asm-mn10300/types.h
@@ -11,29 +11,12 @@
#ifndef _ASM_TYPES_H
#define _ASM_TYPES_H
+#include <asm-generic/int-ll64.h>
+
#ifndef __ASSEMBLY__
typedef unsigned short umode_t;
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-typedef __signed__ long long __s64;
-typedef unsigned long long __u64;
-#endif
-
#endif /* __ASSEMBLY__ */
/*
@@ -45,18 +28,6 @@
#ifndef __ASSEMBLY__
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
/* Dma addresses are 32-bits wide. */
typedef u32 dma_addr_t;
diff --git a/include/asm-parisc/types.h b/include/asm-parisc/types.h
index 56c8480..7f5a39b 100644
--- a/include/asm-parisc/types.h
+++ b/include/asm-parisc/types.h
@@ -1,29 +1,12 @@
#ifndef _PARISC_TYPES_H
#define _PARISC_TYPES_H
+#include <asm-generic/int-ll64.h>
+
#ifndef __ASSEMBLY__
typedef unsigned short umode_t;
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
#endif /* __ASSEMBLY__ */
/*
@@ -41,18 +24,6 @@
#ifndef __ASSEMBLY__
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
/* Dma addresses are 32-bits wide. */
typedef u32 dma_addr_t;
diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h
index afae069..e0062d7 100644
--- a/include/asm-powerpc/io.h
+++ b/include/asm-powerpc/io.h
@@ -2,7 +2,7 @@
#define _ASM_POWERPC_IO_H
#ifdef __KERNEL__
-/*
+/*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
@@ -18,6 +18,9 @@
#define _PNPWRP 0xa79
#define PNPBIOS_BASE 0xf000
+#include <linux/device.h>
+#include <linux/io.h>
+
#include <linux/compiler.h>
#include <asm/page.h>
#include <asm/byteorder.h>
@@ -744,6 +747,9 @@
#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
+void __iomem *devm_ioremap_prot(struct device *dev, resource_size_t offset,
+ size_t size, unsigned long flags);
+
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_IO_H */
diff --git a/include/asm-powerpc/kvm_host.h b/include/asm-powerpc/kvm_host.h
index 04ffbb8..81a69d7 100644
--- a/include/asm-powerpc/kvm_host.h
+++ b/include/asm-powerpc/kvm_host.h
@@ -59,6 +59,7 @@
u32 emulated_inst_exits;
u32 dec_exits;
u32 ext_intr_exits;
+ u32 halt_wakeup;
};
struct tlbe {
diff --git a/include/asm-powerpc/kvm_ppc.h b/include/asm-powerpc/kvm_ppc.h
index 7ac8203..b35a7e3 100644
--- a/include/asm-powerpc/kvm_ppc.h
+++ b/include/asm-powerpc/kvm_ppc.h
@@ -77,12 +77,17 @@
clear_bit(priority, &vcpu->arch.pending_exceptions);
}
+/* Helper function for "full" MSR writes. No need to call this if only EE is
+ * changing. */
static inline void kvmppc_set_msr(struct kvm_vcpu *vcpu, u32 new_msr)
{
if ((new_msr & MSR_PR) != (vcpu->arch.msr & MSR_PR))
kvmppc_mmu_priv_switch(vcpu, new_msr & MSR_PR);
vcpu->arch.msr = new_msr;
+
+ if (vcpu->arch.msr & MSR_WE)
+ kvm_vcpu_block(vcpu);
}
#endif /* __POWERPC_KVM_PPC_H__ */
diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h
index 7c97b5a..c08e714 100644
--- a/include/asm-powerpc/pgtable-ppc32.h
+++ b/include/asm-powerpc/pgtable-ppc32.h
@@ -209,6 +209,13 @@
* 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
* - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR
*
+ * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional
+ * TLB2 storage attibute fields. Those are:
+ *
+ * TLB2:
+ * 0...10 11 12 13 14 15 16...31
+ * no change WL1 IL1I IL1D IL2I IL2D no change
+ *
* There are some constrains and options, to decide mapping software bits
* into TLB entry.
*
diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h
index 9e8ed68..81ffe3b 100644
--- a/include/asm-powerpc/ps3.h
+++ b/include/asm-powerpc/ps3.h
@@ -178,9 +178,6 @@
PS3_BINDING_CPU_1 = 1,
};
-int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
- unsigned int *virq);
-int ps3_virq_destroy(unsigned int virq);
int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
unsigned int *virq);
int ps3_irq_plug_destroy(unsigned int virq);
diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h
index e3c845b..6abead6e 100644
--- a/include/asm-powerpc/spu.h
+++ b/include/asm-powerpc/spu.h
@@ -100,6 +100,7 @@
/* Flag indicating progress during context switch. */
#define SPU_CONTEXT_SWITCH_PENDING 0UL
+#define SPU_CONTEXT_FAULT_PENDING 1UL
struct spu_context;
struct spu_runqueue;
@@ -128,9 +129,11 @@
unsigned int irqs[3];
u32 node;
u64 flags;
- u64 dar;
- u64 dsisr;
u64 class_0_pending;
+ u64 class_0_dar;
+ u64 class_0_dsisr;
+ u64 class_1_dar;
+ u64 class_1_dsisr;
size_t ls_size;
unsigned int slb_replace;
struct mm_struct *mm;
@@ -143,7 +146,7 @@
void (* wbox_callback)(struct spu *spu);
void (* ibox_callback)(struct spu *spu);
- void (* stop_callback)(struct spu *spu);
+ void (* stop_callback)(struct spu *spu, int irq);
void (* mfc_callback)(struct spu *spu);
char irq_c0[8];
diff --git a/include/asm-powerpc/spu_csa.h b/include/asm-powerpc/spu_csa.h
index 0ab6bff..129ec14 100644
--- a/include/asm-powerpc/spu_csa.h
+++ b/include/asm-powerpc/spu_csa.h
@@ -254,7 +254,8 @@
u64 spu_chnldata_RW[32];
u32 spu_mailbox_data[4];
u32 pu_mailbox_data[1];
- u64 dar, dsisr, class_0_pending;
+ u64 class_0_dar, class_0_dsisr, class_0_pending;
+ u64 class_1_dar, class_1_dsisr;
unsigned long suspend_time;
spinlock_t register_lock;
};
diff --git a/include/asm-powerpc/syscalls.h b/include/asm-powerpc/syscalls.h
index b3ca41f..2b8a458 100644
--- a/include/asm-powerpc/syscalls.h
+++ b/include/asm-powerpc/syscalls.h
@@ -30,7 +30,7 @@
asmlinkage int sys_vfork(unsigned long p1, unsigned long p2,
unsigned long p3, unsigned long p4, unsigned long p5,
unsigned long p6, struct pt_regs *regs);
-asmlinkage int sys_pipe(int __user *fildes);
+asmlinkage long sys_pipe(int __user *fildes);
asmlinkage long sys_rt_sigaction(int sig,
const struct sigaction __user *act,
struct sigaction __user *oact, size_t sigsetsize);
diff --git a/include/asm-powerpc/types.h b/include/asm-powerpc/types.h
index c243a6a..d3374bc 100644
--- a/include/asm-powerpc/types.h
+++ b/include/asm-powerpc/types.h
@@ -1,6 +1,12 @@
#ifndef _ASM_POWERPC_TYPES_H
#define _ASM_POWERPC_TYPES_H
+#ifdef __powerpc64__
+# include <asm-generic/int-l64.h>
+#else
+# include <asm-generic/int-ll64.h>
+#endif
+
#ifndef __ASSEMBLY__
/*
@@ -22,30 +28,6 @@
typedef unsigned short umode_t;
#endif
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#ifdef __powerpc64__
-typedef __signed__ long __s64;
-typedef unsigned long __u64;
-#else
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-#endif /* __powerpc64__ */
-
typedef struct {
__u32 u[4];
} __attribute__((aligned(16))) __vector128;
@@ -64,24 +46,6 @@
#ifndef __ASSEMBLY__
-
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-#ifdef __powerpc64__
-typedef signed long s64;
-typedef unsigned long u64;
-#else
-typedef signed long long s64;
-typedef unsigned long long u64;
-#endif
-
typedef __vector128 vector128;
/* Physical address used by some IO functions */
diff --git a/include/asm-ppc/system.h b/include/asm-ppc/system.h
index 0593cb8..70ebd33 100644
--- a/include/asm-ppc/system.h
+++ b/include/asm-ppc/system.h
@@ -178,7 +178,7 @@
}
-extern inline void * xchg_ptr(void * m, void * val)
+static inline void * xchg_ptr(void * m, void * val)
{
return (void *) xchg_u32(m, (unsigned long) val);
}
diff --git a/include/asm-s390/kvm_host.h b/include/asm-s390/kvm_host.h
index f8204a4..18cbd8a 100644
--- a/include/asm-s390/kvm_host.h
+++ b/include/asm-s390/kvm_host.h
@@ -104,6 +104,7 @@
struct kvm_vcpu_stat {
u32 exit_userspace;
+ u32 exit_null;
u32 exit_external_request;
u32 exit_external_interrupt;
u32 exit_stop_request;
diff --git a/include/asm-s390/page.h b/include/asm-s390/page.h
index f0f4579..12fd9c4 100644
--- a/include/asm-s390/page.h
+++ b/include/asm-s390/page.h
@@ -125,6 +125,17 @@
return skey;
}
+#ifdef CONFIG_PAGE_STATES
+
+struct page;
+void arch_free_page(struct page *page, int order);
+void arch_alloc_page(struct page *page, int order);
+
+#define HAVE_ARCH_FREE_PAGE
+#define HAVE_ARCH_ALLOC_PAGE
+
+#endif
+
#endif /* !__ASSEMBLY__ */
/* to align the pointer to the (next) page boundary */
diff --git a/include/asm-s390/ptrace.h b/include/asm-s390/ptrace.h
index 441d7c2..d7d4e2e 100644
--- a/include/asm-s390/ptrace.h
+++ b/include/asm-s390/ptrace.h
@@ -471,6 +471,8 @@
extern void user_enable_single_step(struct task_struct *);
extern void user_disable_single_step(struct task_struct *);
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+
#define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0)
#define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN)
#define regs_return_value(regs)((regs)->gprs[2])
diff --git a/include/asm-s390/system.h b/include/asm-s390/system.h
index c819ae2..e0d4500 100644
--- a/include/asm-s390/system.h
+++ b/include/asm-s390/system.h
@@ -116,6 +116,12 @@
#define pfault_fini() do { } while (0)
#endif /* CONFIG_PFAULT */
+#ifdef CONFIG_PAGE_STATES
+extern void cmma_init(void);
+#else
+static inline void cmma_init(void) { }
+#endif
+
#define finish_arch_switch(prev) do { \
set_fs(current->thread.mm_segment); \
account_vtime(prev); \
diff --git a/include/asm-s390/types.h b/include/asm-s390/types.h
index 2c5879a..0e959e2 100644
--- a/include/asm-s390/types.h
+++ b/include/asm-s390/types.h
@@ -9,34 +9,16 @@
#ifndef _S390_TYPES_H
#define _S390_TYPES_H
+#ifndef __s390x__
+# include <asm-generic/int-ll64.h>
+#else
+# include <asm-generic/int-l64.h>
+#endif
+
#ifndef __ASSEMBLY__
typedef unsigned short umode_t;
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#ifndef __s390x__
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-#else /* __s390x__ */
-typedef __signed__ long __s64;
-typedef unsigned long __u64;
-#endif
-
/* A address type so that arithmetic can be done on it & it can be upgraded to
64 bit when necessary
*/
@@ -58,24 +40,6 @@
#ifndef __ASSEMBLY__
-
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-#ifndef __s390x__
-typedef signed long long s64;
-typedef unsigned long long u64;
-#else /* __s390x__ */
-typedef signed long s64;
-typedef unsigned long u64;
-#endif /* __s390x__ */
-
typedef u32 dma_addr_t;
#ifndef __s390x__
diff --git a/include/asm-sh/cpu-sh3/dma.h b/include/asm-sh/cpu-sh3/dma.h
index 092ff9d..6813c32 100644
--- a/include/asm-sh/cpu-sh3/dma.h
+++ b/include/asm-sh/cpu-sh3/dma.h
@@ -3,19 +3,19 @@
#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
+ defined(CONFIG_CPU_SUBTYPE_SH7721)
#define SH_DMAC_BASE 0xa4010020
+#else
+#define SH_DMAC_BASE 0xa4000020
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7709)
#define DMTE0_IRQ 48
#define DMTE1_IRQ 49
#define DMTE2_IRQ 50
#define DMTE3_IRQ 51
#define DMTE4_IRQ 76
#define DMTE5_IRQ 77
-
-#else
-#define SH_DMAC_BASE 0xa4000020
#endif
/* Definitions for the SuperH DMAC */
diff --git a/include/asm-sh/hw_irq.h b/include/asm-sh/hw_irq.h
index c958fda..7438d1e 100644
--- a/include/asm-sh/hw_irq.h
+++ b/include/asm-sh/hw_irq.h
@@ -79,6 +79,10 @@
struct intc_sense_reg *sense_regs;
unsigned int nr_sense_regs;
char *name;
+#ifdef CONFIG_CPU_SH3
+ struct intc_mask_reg *ack_regs;
+ unsigned int nr_ack_regs;
+#endif
};
#define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a)
@@ -91,10 +95,25 @@
chipname, \
}
+#ifdef CONFIG_CPU_SH3
+#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups, \
+ mask_regs, prio_regs, sense_regs, ack_regs) \
+struct intc_desc symbol __initdata = { \
+ _INTC_ARRAY(vectors), _INTC_ARRAY(groups), \
+ _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs), \
+ _INTC_ARRAY(sense_regs), \
+ chipname, \
+ _INTC_ARRAY(ack_regs), \
+}
+#endif
+
void __init register_intc_controller(struct intc_desc *desc);
int intc_set_priority(unsigned int irq, unsigned int prio);
void __init plat_irq_setup(void);
+#ifdef CONFIG_CPU_SH3
+void __init plat_irq_setup_sh3(void);
+#endif
enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210,
IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK,
diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h
index 356e50d..a4fbf0c 100644
--- a/include/asm-sh/io.h
+++ b/include/asm-sh/io.h
@@ -268,11 +268,6 @@
unsigned long long poke_real_address_q(unsigned long long addr,
unsigned long long val);
-/* arch/sh/mm/ioremap_64.c */
-unsigned long onchip_remap(unsigned long addr, unsigned long size,
- const char *name);
-extern void onchip_unmap(unsigned long vaddr);
-
#if !defined(CONFIG_MMU)
#define virt_to_phys(address) ((unsigned long)(address))
#define phys_to_virt(address) ((void *)(address))
@@ -302,9 +297,16 @@
void __iomem *__ioremap(unsigned long offset, unsigned long size,
unsigned long flags);
void __iounmap(void __iomem *addr);
+
+/* arch/sh/mm/ioremap_64.c */
+unsigned long onchip_remap(unsigned long addr, unsigned long size,
+ const char *name);
+extern void onchip_unmap(unsigned long vaddr);
#else
#define __ioremap(offset, size, flags) ((void __iomem *)(offset))
#define __iounmap(addr) do { } while (0)
+#define onchip_remap(addr, size, name) (addr)
+#define onchip_unmap(addr) do { } while (0)
#endif /* CONFIG_MMU */
static inline void __iomem *
diff --git a/include/asm-sh/keyboard.h b/include/asm-sh/keyboard.h
deleted file mode 100644
index 31dcc4f..0000000
--- a/include/asm-sh/keyboard.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASM_SH_KEYBOARD_H
-#define __ASM_SH_KEYBOARD_H
-/*
- * $Id: keyboard.h,v 1.1.1.1 2001/10/15 20:45:09 mrbrown Exp $
- */
-
-#include <linux/kd.h>
-#include <asm/machvec.h>
-
-#ifdef CONFIG_SH_MPC1211
-#include <asm/mpc1211/keyboard-mpc1211.h>
-#endif
-#endif
diff --git a/include/asm-sh/mmu_context.h b/include/asm-sh/mmu_context.h
index fe58d00..87e812f 100644
--- a/include/asm-sh/mmu_context.h
+++ b/include/asm-sh/mmu_context.h
@@ -27,6 +27,7 @@
/* ASID is 8-bit value, so it can't be 0x100 */
#define MMU_NO_ASID 0x100
+#ifdef CONFIG_MMU
#define asid_cache(cpu) (cpu_data[cpu].asid_cache)
#define cpu_context(cpu, mm) ((mm)->context.id[cpu])
@@ -38,7 +39,6 @@
*/
#define MMU_VPN_MASK 0xfffff000
-#ifdef CONFIG_MMU
#if defined(CONFIG_SUPERH32)
#include "mmu_context_32.h"
#else
@@ -129,6 +129,8 @@
#define destroy_context(mm) do { } while (0)
#define set_asid(asid) do { } while (0)
#define get_asid() (0)
+#define cpu_asid(cpu, mm) ({ (void)cpu; 0; })
+#define switch_and_save_asid(asid) (0)
#define set_TTB(pgd) do { } while (0)
#define get_TTB() (0)
#define activate_context(mm,cpu) do { } while (0)
diff --git a/include/asm-sh/mmzone.h b/include/asm-sh/mmzone.h
index 7969f38..2969253 100644
--- a/include/asm-sh/mmzone.h
+++ b/include/asm-sh/mmzone.h
@@ -41,6 +41,8 @@
/* arch/sh/kernel/setup.c */
void __init setup_bootmem_allocator(unsigned long start_pfn);
+void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
+ unsigned long end_pfn);
#endif /* __KERNEL__ */
#endif /* __ASM_SH_MMZONE_H */
diff --git a/include/asm-sh/mpc1211/dma.h b/include/asm-sh/mpc1211/dma.h
deleted file mode 100644
index e506d1a..0000000
--- a/include/asm-sh/mpc1211/dma.h
+++ /dev/null
@@ -1,303 +0,0 @@
-/* $Id: dma.h,v 1.7 1992/12/14 00:29:34 root Exp root $
- * linux/include/asm/dma.h: Defines for using and allocating dma channels.
- * Written by Hennus Bergman, 1992.
- * High DMA channel support & info by Hannu Savolainen
- * and John Boyd, Nov. 1992.
- */
-
-#ifndef _ASM_MPC1211_DMA_H
-#define _ASM_MPC1211_DMA_H
-
-#include <linux/spinlock.h> /* And spinlocks */
-#include <asm/io.h> /* need byte IO */
-#include <linux/delay.h>
-
-
-#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
-#define dma_outb outb_p
-#else
-#define dma_outb outb
-#endif
-
-#define dma_inb inb
-
-/*
- * NOTES about DMA transfers:
- *
- * controller 1: channels 0-3, byte operations, ports 00-1F
- * controller 2: channels 4-7, word operations, ports C0-DF
- *
- * - ALL registers are 8 bits only, regardless of transfer size
- * - channel 4 is not used - cascades 1 into 2.
- * - channels 0-3 are byte - addresses/counts are for physical bytes
- * - channels 5-7 are word - addresses/counts are for physical words
- * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
- * - transfer count loaded to registers is 1 less than actual count
- * - controller 2 offsets are all even (2x offsets for controller 1)
- * - page registers for 5-7 don't use data bit 0, represent 128K pages
- * - page registers for 0-3 use bit 0, represent 64K pages
- *
- * DMA transfers are limited to the lower 16MB of _physical_ memory.
- * Note that addresses loaded into registers must be _physical_ addresses,
- * not logical addresses (which may differ if paging is active).
- *
- * Address mapping for channels 0-3:
- *
- * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses)
- * | ... | | ... | | ... |
- * | ... | | ... | | ... |
- * | ... | | ... | | ... |
- * P7 ... P0 A7 ... A0 A7 ... A0
- * | Page | Addr MSB | Addr LSB | (DMA registers)
- *
- * Address mapping for channels 5-7:
- *
- * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses)
- * | ... | \ \ ... \ \ \ ... \ \
- * | ... | \ \ ... \ \ \ ... \ (not used)
- * | ... | \ \ ... \ \ \ ... \
- * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0
- * | Page | Addr MSB | Addr LSB | (DMA registers)
- *
- * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
- * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
- * the hardware level, so odd-byte transfers aren't possible).
- *
- * Transfer count (_not # bytes_) is limited to 64K, represented as actual
- * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more,
- * and up to 128K bytes may be transferred on channels 5-7 in one operation.
- *
- */
-
-#define MAX_DMA_CHANNELS 8
-
-/* The maximum address that we can perform a DMA transfer to on this platform */
-#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x10000000)
-
-/* 8237 DMA controllers */
-#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */
-#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */
-
-/* DMA controller registers */
-#define DMA1_CMD_REG 0x08 /* command register (w) */
-#define DMA1_STAT_REG 0x08 /* status register (r) */
-#define DMA1_REQ_REG 0x09 /* request register (w) */
-#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */
-#define DMA1_MODE_REG 0x0B /* mode register (w) */
-#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */
-#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */
-#define DMA1_RESET_REG 0x0D /* Master Clear (w) */
-#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */
-#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */
-
-#define DMA2_CMD_REG 0xD0 /* command register (w) */
-#define DMA2_STAT_REG 0xD0 /* status register (r) */
-#define DMA2_REQ_REG 0xD2 /* request register (w) */
-#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */
-#define DMA2_MODE_REG 0xD6 /* mode register (w) */
-#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */
-#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */
-#define DMA2_RESET_REG 0xDA /* Master Clear (w) */
-#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */
-#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */
-
-#define DMA_ADDR_0 0x00 /* DMA address registers */
-#define DMA_ADDR_1 0x02
-#define DMA_ADDR_2 0x04
-#define DMA_ADDR_3 0x06
-#define DMA_ADDR_4 0xC0
-#define DMA_ADDR_5 0xC4
-#define DMA_ADDR_6 0xC8
-#define DMA_ADDR_7 0xCC
-
-#define DMA_CNT_0 0x01 /* DMA count registers */
-#define DMA_CNT_1 0x03
-#define DMA_CNT_2 0x05
-#define DMA_CNT_3 0x07
-#define DMA_CNT_4 0xC2
-#define DMA_CNT_5 0xC6
-#define DMA_CNT_6 0xCA
-#define DMA_CNT_7 0xCE
-
-#define DMA_PAGE_0 0x87 /* DMA page registers */
-#define DMA_PAGE_1 0x83
-#define DMA_PAGE_2 0x81
-#define DMA_PAGE_3 0x82
-#define DMA_PAGE_5 0x8B
-#define DMA_PAGE_6 0x89
-#define DMA_PAGE_7 0x8A
-
-#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */
-#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */
-#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */
-
-#define DMA_AUTOINIT 0x10
-
-
-extern spinlock_t dma_spin_lock;
-
-static __inline__ unsigned long claim_dma_lock(void)
-{
- unsigned long flags;
- spin_lock_irqsave(&dma_spin_lock, flags);
- return flags;
-}
-
-static __inline__ void release_dma_lock(unsigned long flags)
-{
- spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
- if (dmanr<=3)
- dma_outb(dmanr, DMA1_MASK_REG);
- else
- dma_outb(dmanr & 3, DMA2_MASK_REG);
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
- if (dmanr<=3)
- dma_outb(dmanr | 4, DMA1_MASK_REG);
- else
- dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while holding the DMA lock ! ---
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
- if (dmanr<=3)
- dma_outb(0, DMA1_CLEAR_FF_REG);
- else
- dma_outb(0, DMA2_CLEAR_FF_REG);
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
- if (dmanr<=3)
- dma_outb(mode | dmanr, DMA1_MODE_REG);
- else
- dma_outb(mode | (dmanr&3), DMA2_MODE_REG);
-}
-
-/* Set only the page register bits of the transfer address.
- * This is used for successive transfers when we know the contents of
- * the lower 16 bits of the DMA current address register, but a 64k boundary
- * may have been crossed.
- */
-static __inline__ void set_dma_page(unsigned int dmanr, unsigned int pagenr)
-{
- switch(dmanr) {
- case 0:
- dma_outb( pagenr & 0xff, DMA_PAGE_0);
- dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_0 + 0x400);
- break;
- case 1:
- dma_outb( pagenr & 0xff, DMA_PAGE_1);
- dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_1 + 0x400);
- break;
- case 2:
- dma_outb( pagenr & 0xff, DMA_PAGE_2);
- dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_2 + 0x400);
- break;
- case 3:
- dma_outb( pagenr & 0xff, DMA_PAGE_3);
- dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_3 + 0x400);
- break;
- case 5:
- dma_outb( pagenr & 0xfe, DMA_PAGE_5);
- dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_5 + 0x400);
- break;
- case 6:
- dma_outb( pagenr & 0xfe, DMA_PAGE_6);
- dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_6 + 0x400);
- break;
- case 7:
- dma_outb( pagenr & 0xfe, DMA_PAGE_7);
- dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_7 + 0x400);
- break;
- }
-}
-
-
-/* Set transfer address & page bits for specific DMA channel.
- * Assumes dma flipflop is clear.
- */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
- set_dma_page(dmanr, a>>16);
- if (dmanr <= 3) {
- dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
- dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
- } else {
- dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
- dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
- }
-}
-
-
-/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
- * a specific DMA channel.
- * You must ensure the parameters are valid.
- * NOTE: from a manual: "the number of transfers is one more
- * than the initial word count"! This is taken into account.
- * Assumes dma flip-flop is clear.
- * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
- count--;
- if (dmanr <= 3) {
- dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
- dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
- } else {
- dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
- dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
- }
-}
-
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- *
- * Assumes DMA flip-flop is clear.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
- unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
- : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
-
- /* using short to get 16-bit wrap around */
- unsigned short count;
-
- count = 1 + dma_inb(io_port);
- count += dma_inb(io_port) << 8;
- return (dmanr<=3)? count : (count<<1);
-}
-
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr); /* release it again */
-
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy (0)
-#endif
-
-#endif /* _ASM_MPC1211_DMA_H */
diff --git a/include/asm-sh/mpc1211/io.h b/include/asm-sh/mpc1211/io.h
deleted file mode 100644
index 6298370..0000000
--- a/include/asm-sh/mpc1211/io.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-sh/mpc1211/io.h
- *
- * Copyright 2001 Saito.K & Jeanne
- *
- * IO functions for an Interface MPC-1211
- */
-
-#ifndef _ASM_SH_IO_MPC1211_H
-#define _ASM_SH_IO_MPC1211_H
-
-#include <linux/time.h>
-
-extern int mpc1211_irq_demux(int irq);
-
-extern void init_mpc1211_IRQ(void);
-extern void heartbeat_mpc1211(void);
-
-extern void mpc1211_rtc_gettimeofday(struct timeval *tv);
-extern int mpc1211_rtc_settimeofday(const struct timeval *tv);
-
-#endif /* _ASM_SH_IO_MPC1211_H */
diff --git a/include/asm-sh/mpc1211/keyboard.h b/include/asm-sh/mpc1211/keyboard.h
deleted file mode 100644
index 9020fee..0000000
--- a/include/asm-sh/mpc1211/keyboard.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * MPC1211 specific keybord definitions
- * Taken from the old asm-i386/keybord.h for PC/AT-style definitions
- * created 3 Nov 1996 by Geert Uytterhoeven.
- */
-
-#ifdef __KERNEL__
-
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/kd.h>
-#include <linux/pm.h>
-#include <asm/io.h>
-
-#define KEYBOARD_IRQ 1
-#define DISABLE_KBD_DURING_INTERRUPTS 0
-
-extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode);
-extern int pckbd_getkeycode(unsigned int scancode);
-extern int pckbd_translate(unsigned char scancode, unsigned char *keycode,
- char raw_mode);
-extern char pckbd_unexpected_up(unsigned char keycode);
-extern void pckbd_leds(unsigned char leds);
-extern void pckbd_init_hw(void);
-extern int pckbd_pm_resume(struct pm_dev *, pm_request_t, void *);
-extern pm_callback pm_kbd_request_override;
-
-#define kbd_setkeycode pckbd_setkeycode
-#define kbd_getkeycode pckbd_getkeycode
-#define kbd_translate pckbd_translate
-#define kbd_unexpected_up pckbd_unexpected_up
-#define kbd_leds pckbd_leds
-#define kbd_init_hw pckbd_init_hw
-
-/* resource allocation */
-#define kbd_request_region()
-#define kbd_request_irq(handler) request_irq(KEYBOARD_IRQ, handler, 0, \
- "keyboard", NULL)
-
-/* How to access the keyboard macros on this platform. */
-#define kbd_read_input() inb(KBD_DATA_REG)
-#define kbd_read_status() inb(KBD_STATUS_REG)
-#define kbd_write_output(val) outb(val, KBD_DATA_REG)
-#define kbd_write_command(val) outb(val, KBD_CNTL_REG)
-
-/* Some stoneage hardware needs delays after some operations. */
-#define kbd_pause() do { } while(0)
-
-/*
- * Machine specific bits for the PS/2 driver
- */
-
-#define AUX_IRQ 12
-
-#define aux_request_irq(hand, dev_id) \
- request_irq(AUX_IRQ, hand, IRQF_SHARED, "PS2 Mouse", dev_id)
-
-#define aux_free_irq(dev_id) free_irq(AUX_IRQ, dev_id)
-
-#endif /* __KERNEL__ */
diff --git a/include/asm-sh/mpc1211/m1543c.h b/include/asm-sh/mpc1211/m1543c.h
deleted file mode 100644
index c95d132..0000000
--- a/include/asm-sh/mpc1211/m1543c.h
+++ /dev/null
@@ -1,200 +0,0 @@
-#ifndef __ASM_SH_M1543C_H
-#define __ASM_SH_M1543C_H
-
-/*
- * linux/include/asm-sh/m1543c.h
- * Copyright (C) 2001 Nobuhiro Sakawa
- * M1543C:PCI-ISA Bus Bridge with Super IO Chip support
- *
- * from
- *
- * linux/include/asm-sh/smc37c93x.h
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * SMSC 37C93x Super IO Chip support
- */
-
-/* Default base I/O address */
-#define FDC_PRIMARY_BASE 0x3f0
-#define IDE1_PRIMARY_BASE 0x1f0
-#define IDE1_SECONDARY_BASE 0x170
-#define PARPORT_PRIMARY_BASE 0x378
-#define COM1_PRIMARY_BASE 0x2f8
-#define COM2_PRIMARY_BASE 0x3f8
-#define COM3_PRIMARY_BASE 0x3e8
-#define RTC_PRIMARY_BASE 0x070
-#define KBC_PRIMARY_BASE 0x060
-#define AUXIO_PRIMARY_BASE 0x000 /* XXX */
-#define I8259_M_CR 0x20
-#define I8259_M_MR 0x21
-#define I8259_S_CR 0xa0
-#define I8259_S_MR 0xa1
-
-/* Logical device number */
-#define LDN_FDC 0
-#define LDN_IDE1 1
-#define LDN_IDE2 2
-#define LDN_PARPORT 3
-#define LDN_COM1 4
-#define LDN_COM2 5
-#define LDN_COM3 11
-#define LDN_RTC 6
-#define LDN_KBC 7
-
-/* Configuration port and key */
-#define CONFIG_PORT 0x3f0
-#define INDEX_PORT CONFIG_PORT
-#define DATA_PORT 0x3f1
-#define CONFIG_ENTER1 0x51
-#define CONFIG_ENTER2 0x23
-#define CONFIG_EXIT 0xbb
-
-/* Configuration index */
-#define CURRENT_LDN_INDEX 0x07
-#define POWER_CONTROL_INDEX 0x22
-#define ACTIVATE_INDEX 0x30
-#define IO_BASE_HI_INDEX 0x60
-#define IO_BASE_LO_INDEX 0x61
-#define IRQ_SELECT_INDEX 0x70
-#define PS2_IRQ_INDEX 0x72
-#define DMA_SELECT_INDEX 0x74
-
-/* UART stuff. Only for debugging. */
-/* UART Register */
-
-#define UART_RBR 0x0 /* Receiver Buffer Register (Read Only) */
-#define UART_THR 0x0 /* Transmitter Holding Register (Write Only) */
-#define UART_IER 0x2 /* Interrupt Enable Register */
-#define UART_IIR 0x4 /* Interrupt Ident Register (Read Only) */
-#define UART_FCR 0x4 /* FIFO Control Register (Write Only) */
-#define UART_LCR 0x6 /* Line Control Register */
-#define UART_MCR 0x8 /* MODEM Control Register */
-#define UART_LSR 0xa /* Line Status Register */
-#define UART_MSR 0xc /* MODEM Status Register */
-#define UART_SCR 0xe /* Scratch Register */
-#define UART_DLL 0x0 /* Divisor Latch (LS) */
-#define UART_DLM 0x2 /* Divisor Latch (MS) */
-
-#ifndef __ASSEMBLY__
-typedef struct uart_reg {
- volatile __u16 rbr;
- volatile __u16 ier;
- volatile __u16 iir;
- volatile __u16 lcr;
- volatile __u16 mcr;
- volatile __u16 lsr;
- volatile __u16 msr;
- volatile __u16 scr;
-} uart_reg;
-#endif /* ! __ASSEMBLY__ */
-
-/* Alias for Write Only Register */
-
-#define thr rbr
-#define tcr iir
-
-/* Alias for Divisor Latch Register */
-
-#define dll rbr
-#define dlm ier
-#define fcr iir
-
-/* Interrupt Enable Register */
-
-#define IER_ERDAI 0x0100 /* Enable Received Data Available Interrupt */
-#define IER_ETHREI 0x0200 /* Enable Transmitter Holding Register Empty Interrupt */
-#define IER_ELSI 0x0400 /* Enable Receiver Line Status Interrupt */
-#define IER_EMSI 0x0800 /* Enable MODEM Status Interrupt */
-
-/* Interrupt Ident Register */
-
-#define IIR_IP 0x0100 /* "0" if Interrupt Pending */
-#define IIR_IIB0 0x0200 /* Interrupt ID Bit 0 */
-#define IIR_IIB1 0x0400 /* Interrupt ID Bit 1 */
-#define IIR_IIB2 0x0800 /* Interrupt ID Bit 2 */
-#define IIR_FIFO 0xc000 /* FIFOs enabled */
-
-/* FIFO Control Register */
-
-#define FCR_FEN 0x0100 /* FIFO enable */
-#define FCR_RFRES 0x0200 /* Receiver FIFO reset */
-#define FCR_TFRES 0x0400 /* Transmitter FIFO reset */
-#define FCR_DMA 0x0800 /* DMA mode select */
-#define FCR_RTL 0x4000 /* Receiver triger (LSB) */
-#define FCR_RTM 0x8000 /* Receiver triger (MSB) */
-
-/* Line Control Register */
-
-#define LCR_WLS0 0x0100 /* Word Length Select Bit 0 */
-#define LCR_WLS1 0x0200 /* Word Length Select Bit 1 */
-#define LCR_STB 0x0400 /* Number of Stop Bits */
-#define LCR_PEN 0x0800 /* Parity Enable */
-#define LCR_EPS 0x1000 /* Even Parity Select */
-#define LCR_SP 0x2000 /* Stick Parity */
-#define LCR_SB 0x4000 /* Set Break */
-#define LCR_DLAB 0x8000 /* Divisor Latch Access Bit */
-
-/* MODEM Control Register */
-
-#define MCR_DTR 0x0100 /* Data Terminal Ready */
-#define MCR_RTS 0x0200 /* Request to Send */
-#define MCR_OUT1 0x0400 /* Out 1 */
-#define MCR_IRQEN 0x0800 /* IRQ Enable */
-#define MCR_LOOP 0x1000 /* Loop */
-
-/* Line Status Register */
-
-#define LSR_DR 0x0100 /* Data Ready */
-#define LSR_OE 0x0200 /* Overrun Error */
-#define LSR_PE 0x0400 /* Parity Error */
-#define LSR_FE 0x0800 /* Framing Error */
-#define LSR_BI 0x1000 /* Break Interrupt */
-#define LSR_THRE 0x2000 /* Transmitter Holding Register Empty */
-#define LSR_TEMT 0x4000 /* Transmitter Empty */
-#define LSR_FIFOE 0x8000 /* Receiver FIFO error */
-
-/* MODEM Status Register */
-
-#define MSR_DCTS 0x0100 /* Delta Clear to Send */
-#define MSR_DDSR 0x0200 /* Delta Data Set Ready */
-#define MSR_TERI 0x0400 /* Trailing Edge Ring Indicator */
-#define MSR_DDCD 0x0800 /* Delta Data Carrier Detect */
-#define MSR_CTS 0x1000 /* Clear to Send */
-#define MSR_DSR 0x2000 /* Data Set Ready */
-#define MSR_RI 0x4000 /* Ring Indicator */
-#define MSR_DCD 0x8000 /* Data Carrier Detect */
-
-/* Baud Rate Divisor */
-
-#define UART_CLK (1843200) /* 1.8432 MHz */
-#define UART_BAUD(x) (UART_CLK / (16 * (x)))
-
-/* RTC register definition */
-#define RTC_SECONDS 0
-#define RTC_SECONDS_ALARM 1
-#define RTC_MINUTES 2
-#define RTC_MINUTES_ALARM 3
-#define RTC_HOURS 4
-#define RTC_HOURS_ALARM 5
-#define RTC_DAY_OF_WEEK 6
-#define RTC_DAY_OF_MONTH 7
-#define RTC_MONTH 8
-#define RTC_YEAR 9
-#define RTC_FREQ_SELECT 10
-# define RTC_UIP 0x80
-# define RTC_DIV_CTL 0x70
-/* This RTC can work under 32.768KHz clock only. */
-# define RTC_OSC_ENABLE 0x20
-# define RTC_OSC_DISABLE 0x00
-#define RTC_CONTROL 11
-# define RTC_SET 0x80
-# define RTC_PIE 0x40
-# define RTC_AIE 0x20
-# define RTC_UIE 0x10
-# define RTC_SQWE 0x08
-# define RTC_DM_BINARY 0x04
-# define RTC_24H 0x02
-# define RTC_DST_EN 0x01
-
-#endif /* __ASM_SH_M1543C_H */
diff --git a/include/asm-sh/mpc1211/mc146818rtc.h b/include/asm-sh/mpc1211/mc146818rtc.h
deleted file mode 100644
index e245f2a..0000000
--- a/include/asm-sh/mpc1211/mc146818rtc.h
+++ /dev/null
@@ -1,6 +0,0 @@
-/*
- * MPC1211 uses PC/AT style RTC definitions.
- */
-#include <asm-x86/mc146818rtc_32.h>
-
-
diff --git a/include/asm-sh/mpc1211/mpc1211.h b/include/asm-sh/mpc1211/mpc1211.h
deleted file mode 100644
index fa456c3..0000000
--- a/include/asm-sh/mpc1211/mpc1211.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef __ASM_SH_MPC1211_H
-#define __ASM_SH_MPC1211_H
-
-/*
- * linux/include/asm-sh/mpc1211.h
- *
- * Copyright (C) 2001 Saito.K & Jeanne
- *
- * Interface MPC-1211 support
- */
-
-#define PA_PCI_IO (0xa4000000) /* PCI I/O space */
-#define PA_PCI_MEM (0xb0000000) /* PCI MEM space */
-
-#define PCIPAR (0xa4000cf8) /* PCI Config address */
-#define PCIPDR (0xa4000cfc) /* PCI Config data */
-
-#endif /* __ASM_SH_MPC1211_H */
diff --git a/include/asm-sh/mpc1211/pci.h b/include/asm-sh/mpc1211/pci.h
deleted file mode 100644
index d9162c5..0000000
--- a/include/asm-sh/mpc1211/pci.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Low-Level PCI Support for MPC-1211
- *
- * (c) 2002 Saito.K & Jeanne
- *
- */
-
-#ifndef _PCI_MPC1211_H_
-#define _PCI_MPC1211_H_
-
-#include <linux/pci.h>
-
-/* set debug level 4=verbose...1=terse */
-//#define DEBUG_PCI 3
-#undef DEBUG_PCI
-
-#ifdef DEBUG_PCI
-#define PCIDBG(n, x...) { if(DEBUG_PCI>=n) printk(x); }
-#else
-#define PCIDBG(n, x...)
-#endif
-
-/* startup values */
-#define PCI_PROBE_BIOS 1
-#define PCI_PROBE_CONF1 2
-#define PCI_PROBE_CONF2 4
-#define PCI_NO_CHECKS 0x400
-#define PCI_ASSIGN_ROMS 0x1000
-#define PCI_BIOS_IRQ_SCAN 0x2000
-
-/* MPC-1211 Specific Values */
-#define PCIPAR (0xa4000cf8) /* PCI Config address */
-#define PCIPDR (0xa4000cfc) /* PCI Config data */
-
-#define PA_PCI_IO (0xa4000000) /* PCI I/O space */
-#define PA_PCI_MEM (0xb0000000) /* PCI MEM space */
-
-#endif /* _PCI_MPC1211_H_ */
diff --git a/include/asm-sh/r7780rp.h b/include/asm-sh/r7780rp.h
index a33838f..306f735 100644
--- a/include/asm-sh/r7780rp.h
+++ b/include/asm-sh/r7780rp.h
@@ -193,8 +193,6 @@
#define IRQ_SCIF0 (HL_FPGA_IRQ_BASE + 15)
#define IRQ_SCIF1 (HL_FPGA_IRQ_BASE + 16)
-unsigned char *highlander_init_irq_r7780mp(void);
-unsigned char *highlander_init_irq_r7780rp(void);
-unsigned char *highlander_init_irq_r7785rp(void);
+unsigned char *highlander_plat_irq_setup(void);
#endif /* __ASM_SH_RENESAS_R7780RP */
diff --git a/include/asm-sh/tlb_64.h b/include/asm-sh/tlb_64.h
index 0308e05f..0a96f3a 100644
--- a/include/asm-sh/tlb_64.h
+++ b/include/asm-sh/tlb_64.h
@@ -56,6 +56,7 @@
__asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot));
}
+#ifdef CONFIG_MMU
/* arch/sh64/mm/tlb.c */
int sh64_tlb_init(void);
unsigned long long sh64_next_free_dtlb_entry(void);
@@ -64,6 +65,13 @@
void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr,
unsigned long asid, unsigned long paddr);
void sh64_teardown_tlb_slot(unsigned long long config_addr);
-
+#else
+#define sh64_tlb_init() do { } while (0)
+#define sh64_next_free_dtlb_entry() (0)
+#define sh64_get_wired_dtlb_entry() (0)
+#define sh64_put_wired_dtlb_entry(entry) do { } while (0)
+#define sh64_setup_tlb_slot(conf, virt, asid, phys) do { } while (0)
+#define sh64_teardown_tlb_slot(addr) do { } while (0)
+#endif /* CONFIG_MMU */
#endif /* __ASSEMBLY__ */
#endif /* __ASM_SH_TLB_64_H */
diff --git a/include/asm-sh/topology.h b/include/asm-sh/topology.h
index 34cdb28..95f0085 100644
--- a/include/asm-sh/topology.h
+++ b/include/asm-sh/topology.h
@@ -29,6 +29,17 @@
.nr_balance_failed = 0, \
}
+#define cpu_to_node(cpu) ((void)(cpu),0)
+#define parent_node(node) ((void)(node),0)
+
+#define node_to_cpumask(node) ((void)node, cpu_online_map)
+#define node_to_first_cpu(node) ((void)(node),0)
+
+#define pcibus_to_node(bus) ((void)(bus), -1)
+#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \
+ CPU_MASK_ALL : \
+ node_to_cpumask(pcibus_to_node(bus)) \
+ )
#endif
#include <asm-generic/topology.h>
diff --git a/include/asm-sh/types.h b/include/asm-sh/types.h
index a6e1d41..beea4e6 100644
--- a/include/asm-sh/types.h
+++ b/include/asm-sh/types.h
@@ -1,29 +1,12 @@
#ifndef __ASM_SH_TYPES_H
#define __ASM_SH_TYPES_H
+#include <asm-generic/int-ll64.h>
+
#ifndef __ASSEMBLY__
typedef unsigned short umode_t;
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
#endif /* __ASSEMBLY__ */
/*
@@ -35,19 +18,6 @@
#ifndef __ASSEMBLY__
-
-typedef __signed__ char s8;
-typedef unsigned char u8;
-
-typedef __signed__ short s16;
-typedef unsigned short u16;
-
-typedef __signed__ int s32;
-typedef unsigned int u32;
-
-typedef __signed__ long long s64;
-typedef unsigned long long u64;
-
/* Dma addresses are 32-bits wide. */
typedef u32 dma_addr_t;
diff --git a/include/asm-sh/uaccess_64.h b/include/asm-sh/uaccess_64.h
index f956b7b..a9b68d0 100644
--- a/include/asm-sh/uaccess_64.h
+++ b/include/asm-sh/uaccess_64.h
@@ -274,7 +274,9 @@
unsigned long insn, fixup;
};
+#ifdef CONFIG_MMU
#define ARCH_HAS_SEARCH_EXTABLE
+#endif
/* Returns 0 if exception not found and fixup.unit otherwise. */
extern unsigned long search_exception_table(unsigned long addr);
diff --git a/include/asm-sparc/oplib.h b/include/asm-sparc/oplib.h
index 17ba82ee..7becc84 100644
--- a/include/asm-sparc/oplib.h
+++ b/include/asm-sparc/oplib.h
@@ -34,9 +34,6 @@
*/
extern int prom_root_node;
-/* PROM stdin and stdout */
-extern int prom_stdin, prom_stdout;
-
/* Pointer to prom structure containing the device tree traversal
* and usage utility functions. Only prom-lib should use these,
* users use the interface defined by the library only!
@@ -84,20 +81,6 @@
extern void prom_seek(int device_handle, unsigned int seek_hival,
unsigned int seek_lowval);
-/* Machine memory configuration routine. */
-
-/* This function returns a V0 format memory descriptor table, it has three
- * entries. One for the total amount of physical ram on the machine, one
- * for the amount of physical ram available, and one describing the virtual
- * areas which are allocated by the prom. So, in a sense the physical
- * available is a calculation of the total physical minus the physical mapped
- * by the prom with virtual mappings.
- *
- * These lists are returned pre-sorted, this should make your life easier
- * since the prom itself is way too lazy to do such nice things.
- */
-extern struct linux_mem_v0 *prom_meminfo(void);
-
/* Miscellaneous routines, don't really fit in any category per se. */
/* Reboot the machine with the command line passed. */
diff --git a/include/asm-sparc/page.h b/include/asm-sparc/page.h
index 39ccf2d..1625a8c 100644
--- a/include/asm-sparc/page.h
+++ b/include/asm-sparc/page.h
@@ -38,12 +38,11 @@
/* The following structure is used to hold the physical
* memory configuration of the machine. This is filled in
- * probe_memory() and is later used by mem_init() to set up
- * mem_map[]. We statically allocate SPARC_PHYS_BANKS of
+ * prom_meminit() and is later used by mem_init() to set up
+ * mem_map[]. We statically allocate SPARC_PHYS_BANKS+1 of
* these structs, this is arbitrary. The entry after the
* last valid one has num_bytes==0.
*/
-
struct sparc_phys_banks {
unsigned long base_addr;
unsigned long num_bytes;
diff --git a/include/asm-sparc/psr.h b/include/asm-sparc/psr.h
index 19c9780..2139704 100644
--- a/include/asm-sparc/psr.h
+++ b/include/asm-sparc/psr.h
@@ -25,6 +25,7 @@
#define PSR_PIL 0x00000f00 /* processor interrupt level */
#define PSR_EF 0x00001000 /* enable floating point */
#define PSR_EC 0x00002000 /* enable co-processor */
+#define PSR_SYSCALL 0x00004000 /* inside of a syscall */
#define PSR_LE 0x00008000 /* SuperSparcII little-endian */
#define PSR_ICC 0x00f00000 /* integer condition codes */
#define PSR_C 0x00100000 /* carry bit */
diff --git a/include/asm-sparc/ptrace.h b/include/asm-sparc/ptrace.h
index 8201a7b..0afb867 100644
--- a/include/asm-sparc/ptrace.h
+++ b/include/asm-sparc/ptrace.h
@@ -10,6 +10,8 @@
#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
struct pt_regs {
unsigned long psr;
unsigned long pc;
@@ -39,6 +41,16 @@
#define UREG_FP UREG_I6
#define UREG_RETPC UREG_I7
+static inline bool pt_regs_is_syscall(struct pt_regs *regs)
+{
+ return (regs->psr & PSR_SYSCALL);
+}
+
+static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
+{
+ return (regs->psr &= ~PSR_SYSCALL);
+}
+
/* A register window */
struct reg_window {
unsigned long locals[8];
@@ -149,6 +161,7 @@
#define SF_XXARG 0x5c
/* Stuff for the ptrace system call */
+#define PTRACE_SPARC_DETACH 11
#define PTRACE_GETREGS 12
#define PTRACE_SETREGS 13
#define PTRACE_GETFPREGS 14
diff --git a/include/asm-sparc/signal.h b/include/asm-sparc/signal.h
index d03a21c..94071c7 100644
--- a/include/asm-sparc/signal.h
+++ b/include/asm-sparc/signal.h
@@ -199,13 +199,7 @@
size_t ss_size;
} stack_t;
-struct sparc_deliver_cookie {
- int restart_syscall;
- unsigned long orig_i0;
-};
-
-struct pt_regs;
-extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie);
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
#endif /* !(__KERNEL__) */
diff --git a/include/asm-sparc/types.h b/include/asm-sparc/types.h
index 42fc6ed..1b08ef8 100644
--- a/include/asm-sparc/types.h
+++ b/include/asm-sparc/types.h
@@ -3,34 +3,18 @@
#define _SPARC_TYPES_H
/*
- * _xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space.
- */
-
-/*
* This file is never included by application software unless
* explicitly requested (e.g., via linux/types.h) in which case the
* application is Linux specific so (user-) name space pollution is
* not a major issue. However, for interoperability, libraries still
* need to be careful to avoid a name clashes.
*/
+#include <asm-generic/int-ll64.h>
#ifndef __ASSEMBLY__
typedef unsigned short umode_t;
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-typedef __signed__ long long __s64;
-typedef unsigned long long __u64;
-
#endif /* __ASSEMBLY__ */
#ifdef __KERNEL__
@@ -39,18 +23,6 @@
#ifndef __ASSEMBLY__
-typedef __signed__ char s8;
-typedef unsigned char u8;
-
-typedef __signed__ short s16;
-typedef unsigned short u16;
-
-typedef __signed__ int s32;
-typedef unsigned int u32;
-
-typedef __signed__ long long s64;
-typedef unsigned long long u64;
-
typedef u32 dma_addr_t;
typedef u32 dma64_addr_t;
diff --git a/include/asm-sparc64/psrcompat.h b/include/asm-sparc64/psrcompat.h
index 5590ce6..3614ca04 100644
--- a/include/asm-sparc64/psrcompat.h
+++ b/include/asm-sparc64/psrcompat.h
@@ -12,6 +12,7 @@
#define PSR_PIL 0x00000f00 /* processor interrupt level */
#define PSR_EF 0x00001000 /* enable floating point */
#define PSR_EC 0x00002000 /* enable co-processor */
+#define PSR_SYSCALL 0x00004000 /* inside of a syscall */
#define PSR_LE 0x00008000 /* SuperSparcII little-endian */
#define PSR_ICC 0x00f00000 /* integer condition codes */
#define PSR_C 0x00100000 /* carry bit */
@@ -30,6 +31,7 @@
PSR_S |
((tstate & TSTATE_ICC) >> 12) |
((tstate & TSTATE_XCC) >> 20) |
+ ((tstate & TSTATE_SYSCALL) ? PSR_SYSCALL : 0) |
PSR_V8PLUS);
}
diff --git a/include/asm-sparc64/pstate.h b/include/asm-sparc64/pstate.h
index f3c4548..949aeba 100644
--- a/include/asm-sparc64/pstate.h
+++ b/include/asm-sparc64/pstate.h
@@ -62,6 +62,7 @@
#define TSTATE_PRIV _AC(0x0000000000000400,UL) /* Privilege. */
#define TSTATE_IE _AC(0x0000000000000200,UL) /* Interrupt Enable. */
#define TSTATE_AG _AC(0x0000000000000100,UL) /* Alternate Globals.*/
+#define TSTATE_SYSCALL _AC(0x0000000000000020,UL) /* in syscall trap */
#define TSTATE_CWP _AC(0x000000000000001f,UL) /* Curr Win-Pointer. */
/* Floating-Point Registers State Register.
diff --git a/include/asm-sparc64/ptrace.h b/include/asm-sparc64/ptrace.h
index 714b819..90972a5 100644
--- a/include/asm-sparc64/ptrace.h
+++ b/include/asm-sparc64/ptrace.h
@@ -42,16 +42,14 @@
return regs->magic & 0x1ff;
}
-static inline int pt_regs_clear_trap_type(struct pt_regs *regs)
-{
- return regs->magic &= ~0x1ff;
-}
-
static inline bool pt_regs_is_syscall(struct pt_regs *regs)
{
- int tt = pt_regs_trap_type(regs);
+ return (regs->tstate & TSTATE_SYSCALL);
+}
- return (tt == 0x110 || tt == 0x111 || tt == 0x16d);
+static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
+{
+ return (regs->tstate &= ~TSTATE_SYSCALL);
}
struct pt_regs32 {
@@ -298,6 +296,7 @@
#define SF_XXARG 0x5c
/* Stuff for the ptrace system call */
+#define PTRACE_SPARC_DETACH 11
#define PTRACE_GETREGS 12
#define PTRACE_SETREGS 13
#define PTRACE_GETFPREGS 14
diff --git a/include/asm-sparc64/signal.h b/include/asm-sparc64/signal.h
index fa6f467..c49f32d 100644
--- a/include/asm-sparc64/signal.h
+++ b/include/asm-sparc64/signal.h
@@ -186,13 +186,7 @@
void __user *ka_restorer;
};
-struct signal_deliver_cookie {
- int restart_syscall;
- unsigned long orig_i0;
-};
-
-struct pt_regs;
-extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie);
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
#endif /* !(__KERNEL__) */
diff --git a/include/asm-sparc64/ttable.h b/include/asm-sparc64/ttable.h
index 1b55538..52d67d3 100644
--- a/include/asm-sparc64/ttable.h
+++ b/include/asm-sparc64/ttable.h
@@ -91,13 +91,14 @@
nop;
#define SYSCALL_TRAP(routine, systbl) \
+ rdpr %pil, %g2; \
+ mov TSTATE_SYSCALL, %g3; \
sethi %hi(109f), %g7; \
- ba,pt %xcc, etrap; \
+ ba,pt %xcc, etrap_syscall; \
109: or %g7, %lo(109b), %g7; \
sethi %hi(systbl), %l7; \
ba,pt %xcc, routine; \
- or %l7, %lo(systbl), %l7; \
- nop; nop;
+ or %l7, %lo(systbl), %l7;
#define TRAP_UTRAP(handler,lvl) \
mov handler, %g3; \
diff --git a/include/asm-sparc64/types.h b/include/asm-sparc64/types.h
index d0ee7f1..5dbe04f 100644
--- a/include/asm-sparc64/types.h
+++ b/include/asm-sparc64/types.h
@@ -9,28 +9,12 @@
* not a major issue. However, for interoperability, libraries still
* need to be careful to avoid a name clashes.
*/
+#include <asm-generic/int-l64.h>
#ifndef __ASSEMBLY__
typedef unsigned short umode_t;
-/*
- * _xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space.
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-typedef __signed__ long __s64;
-typedef unsigned long __u64;
-
#endif /* __ASSEMBLY__ */
#ifdef __KERNEL__
@@ -39,18 +23,6 @@
#ifndef __ASSEMBLY__
-typedef __signed__ char s8;
-typedef unsigned char u8;
-
-typedef __signed__ short s16;
-typedef unsigned short u16;
-
-typedef __signed__ int s32;
-typedef unsigned int u32;
-
-typedef __signed__ long s64;
-typedef unsigned long u64;
-
/* Dma addresses come in generic and 64-bit flavours. */
typedef u32 dma_addr_t;
diff --git a/include/asm-um/div64.h b/include/asm-um/div64.h
index 7b73b2c..1e17f74 100644
--- a/include/asm-um/div64.h
+++ b/include/asm-um/div64.h
@@ -3,5 +3,4 @@
#include "asm/arch/div64.h"
-extern uint64_t div64_64(uint64_t dividend, uint64_t divisor);
#endif
diff --git a/include/asm-um/irq.h b/include/asm-um/irq.h
index de389a4..4a2037f 100644
--- a/include/asm-um/irq.h
+++ b/include/asm-um/irq.h
@@ -15,8 +15,9 @@
#define SIGIO_WRITE_IRQ 11
#define TELNETD_IRQ 12
#define XTERM_IRQ 13
+#define RANDOM_IRQ 14
-#define LAST_IRQ XTERM_IRQ
+#define LAST_IRQ RANDOM_IRQ
#define NR_IRQS (LAST_IRQ + 1)
#endif
diff --git a/include/asm-um/keyboard.h b/include/asm-um/keyboard.h
deleted file mode 100644
index ee2e230..0000000
--- a/include/asm-um/keyboard.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_KEYBOARD_H
-#define __UM_KEYBOARD_H
-
-#include "asm/arch/keyboard.h"
-
-#endif
diff --git a/include/asm-um/page.h b/include/asm-um/page.h
index 381f96b..916e1a6 100644
--- a/include/asm-um/page.h
+++ b/include/asm-um/page.h
@@ -7,16 +7,20 @@
#ifndef __UM_PAGE_H
#define __UM_PAGE_H
+#include <linux/const.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT 12
+#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE-1))
+
+#ifndef __ASSEMBLY__
+
struct page;
#include <linux/types.h>
#include <asm/vm-flags.h>
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT 12
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
-#define PAGE_MASK (~(PAGE_SIZE-1))
-
/*
* These are used to make use of C type-checking..
*/
@@ -120,4 +124,5 @@
#include <asm-generic/memory_model.h>
#include <asm-generic/page.h>
-#endif
+#endif /* __ASSEMBLY__ */
+#endif /* __UM_PAGE_H */
diff --git a/include/asm-v850/types.h b/include/asm-v850/types.h
index 284bda8..89f735e 100644
--- a/include/asm-v850/types.h
+++ b/include/asm-v850/types.h
@@ -10,28 +10,10 @@
* not a major issue. However, for interoperability, libraries still
* need to be careful to avoid a name clashes.
*/
+#include <asm-generic/int-ll64.h>
typedef unsigned short umode_t;
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
#endif /* !__ASSEMBLY__ */
/*
@@ -43,18 +25,6 @@
#ifndef __ASSEMBLY__
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
/* Dma addresses are 32-bits wide. */
typedef u32 dma_addr_t;
diff --git a/include/asm-x86/bitops.h b/include/asm-x86/bitops.h
index b81a4d4..ee4b3ea 100644
--- a/include/asm-x86/bitops.h
+++ b/include/asm-x86/bitops.h
@@ -23,13 +23,10 @@
#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 1)
/* Technically wrong, but this avoids compilation errors on some gcc
versions. */
-#define ADDR "=m" (*(volatile long *)addr)
-#define BIT_ADDR "=m" (((volatile int *)addr)[nr >> 5])
+#define ADDR "=m" (*(volatile long *) addr)
#else
#define ADDR "+m" (*(volatile long *) addr)
-#define BIT_ADDR "+m" (((volatile int *)addr)[nr >> 5])
#endif
-#define BASE_ADDR "m" (*(volatile int *)addr)
/**
* set_bit - Atomically set a bit in memory
@@ -77,7 +74,7 @@
*/
static inline void clear_bit(int nr, volatile void *addr)
{
- asm volatile(LOCK_PREFIX "btr %1,%2" : BIT_ADDR : "Ir" (nr), BASE_ADDR);
+ asm volatile(LOCK_PREFIX "btr %1,%0" : ADDR : "Ir" (nr));
}
/*
@@ -96,7 +93,7 @@
static inline void __clear_bit(int nr, volatile void *addr)
{
- asm volatile("btr %1,%2" : BIT_ADDR : "Ir" (nr), BASE_ADDR);
+ asm volatile("btr %1,%0" : ADDR : "Ir" (nr));
}
/*
@@ -131,7 +128,7 @@
*/
static inline void __change_bit(int nr, volatile void *addr)
{
- asm volatile("btc %1,%2" : BIT_ADDR : "Ir" (nr), BASE_ADDR);
+ asm volatile("btc %1,%0" : ADDR : "Ir" (nr));
}
/**
@@ -145,7 +142,7 @@
*/
static inline void change_bit(int nr, volatile void *addr)
{
- asm volatile(LOCK_PREFIX "btc %1,%2" : BIT_ADDR : "Ir" (nr), BASE_ADDR);
+ asm volatile(LOCK_PREFIX "btc %1,%0" : ADDR : "Ir" (nr));
}
/**
@@ -191,9 +188,10 @@
{
int oldbit;
- asm volatile("bts %2,%3\n\t"
- "sbb %0,%0"
- : "=r" (oldbit), BIT_ADDR : "Ir" (nr), BASE_ADDR);
+ asm("bts %2,%1\n\t"
+ "sbb %0,%0"
+ : "=r" (oldbit), ADDR
+ : "Ir" (nr));
return oldbit;
}
@@ -229,9 +227,10 @@
{
int oldbit;
- asm volatile("btr %2,%3\n\t"
+ asm volatile("btr %2,%1\n\t"
"sbb %0,%0"
- : "=r" (oldbit), BIT_ADDR : "Ir" (nr), BASE_ADDR);
+ : "=r" (oldbit), ADDR
+ : "Ir" (nr));
return oldbit;
}
@@ -240,9 +239,10 @@
{
int oldbit;
- asm volatile("btc %2,%3\n\t"
+ asm volatile("btc %2,%1\n\t"
"sbb %0,%0"
- : "=r" (oldbit), BIT_ADDR : "Ir" (nr), BASE_ADDR);
+ : "=r" (oldbit), ADDR
+ : "Ir" (nr) : "memory");
return oldbit;
}
@@ -276,11 +276,10 @@
{
int oldbit;
- asm volatile("bt %2,%3\n\t"
+ asm volatile("bt %2,%1\n\t"
"sbb %0,%0"
: "=r" (oldbit)
- : "m" (((volatile const int *)addr)[nr >> 5]),
- "Ir" (nr), BASE_ADDR);
+ : "m" (*(unsigned long *)addr), "Ir" (nr));
return oldbit;
}
@@ -397,8 +396,6 @@
}
#endif /* __KERNEL__ */
-#undef BASE_ADDR
-#undef BIT_ADDR
#undef ADDR
static inline void set_bit_string(unsigned long *bitmap,
diff --git a/include/asm-x86/bootparam.h b/include/asm-x86/bootparam.h
index e865990..f62f473 100644
--- a/include/asm-x86/bootparam.h
+++ b/include/asm-x86/bootparam.h
@@ -14,10 +14,10 @@
/* extensible setup data list node */
struct setup_data {
- u64 next;
- u32 type;
- u32 len;
- u8 data[0];
+ __u64 next;
+ __u32 type;
+ __u32 len;
+ __u8 data[0];
};
struct setup_header {
diff --git a/include/asm-x86/div64.h b/include/asm-x86/div64.h
index 0dbf8bf..9a2d644 100644
--- a/include/asm-x86/div64.h
+++ b/include/asm-x86/div64.h
@@ -33,25 +33,25 @@
__mod; \
})
-/*
- * (long)X = ((long long)divs) / (long)div
- * (long)rem = ((long long)divs) % (long)div
- *
- * Warning, this will do an exception if X overflows.
- */
-#define div_long_long_rem(a, b, c) div_ll_X_l_rem(a, b, c)
-
-static inline long div_ll_X_l_rem(long long divs, long div, long *rem)
+static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder)
{
- long dum2;
- asm("divl %2":"=a"(dum2), "=d"(*rem)
- : "rm"(div), "A"(divs));
+ union {
+ u64 v64;
+ u32 v32[2];
+ } d = { dividend };
+ u32 upper;
- return dum2;
-
+ upper = d.v32[1];
+ d.v32[1] = 0;
+ if (upper >= divisor) {
+ d.v32[1] = upper / divisor;
+ upper %= divisor;
+ }
+ asm ("divl %2" : "=a" (d.v32[0]), "=d" (*remainder) :
+ "rm" (divisor), "0" (d.v32[0]), "1" (upper));
+ return d.v64;
}
-
-extern uint64_t div64_64(uint64_t dividend, uint64_t divisor);
+#define div_u64_rem div_u64_rem
#else
# include <asm-generic/div64.h>
diff --git a/include/asm-x86/dmi.h b/include/asm-x86/dmi.h
index 1241e6a..4edf751 100644
--- a/include/asm-x86/dmi.h
+++ b/include/asm-x86/dmi.h
@@ -27,6 +27,7 @@
#endif
+/* Use early IO mappings for DMI because it's initialized early */
#define dmi_ioremap early_ioremap
#define dmi_iounmap early_iounmap
diff --git a/include/asm-x86/geode.h b/include/asm-x86/geode.h
index 7154dc4..6e64588 100644
--- a/include/asm-x86/geode.h
+++ b/include/asm-x86/geode.h
@@ -185,16 +185,14 @@
return (is_geode_gx() || is_geode_lx());
}
-/*
- * The VSA has virtual registers that we can query for a signature.
- */
+#ifdef CONFIG_MGEODE_LX
+extern int geode_has_vsa2(void);
+#else
static inline int geode_has_vsa2(void)
{
- outw(VSA_VR_UNLOCK, VSA_VRC_INDEX);
- outw(VSA_VR_SIGNATURE, VSA_VRC_INDEX);
-
- return (inw(VSA_VRC_DATA) == VSA_SIG);
+ return 0;
}
+#endif
/* MFGPTs */
diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h
index da2adb4..6b722d3 100644
--- a/include/asm-x86/i387.h
+++ b/include/asm-x86/i387.h
@@ -175,7 +175,15 @@
*/
static inline int restore_i387(struct _fpstate __user *buf)
{
- set_used_math();
+ struct task_struct *tsk = current;
+ int err;
+
+ if (!used_math()) {
+ err = init_fpu(tsk);
+ if (err)
+ return err;
+ }
+
if (!(task_thread_info(current)->status & TS_USEDFPU)) {
clts();
task_thread_info(current)->status |= TS_USEDFPU;
diff --git a/include/asm-x86/io_32.h b/include/asm-x86/io_32.h
index 6e73467..049e81e 100644
--- a/include/asm-x86/io_32.h
+++ b/include/asm-x86/io_32.h
@@ -133,11 +133,6 @@
extern void early_iounmap(void *addr, unsigned long size);
extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
-/* Use early IO mappings for DMI because it's initialized early */
-#define dmi_ioremap early_ioremap
-#define dmi_iounmap early_iounmap
-#define dmi_alloc alloc_bootmem
-
/*
* ISA I/O bus memory addresses are 1:1 with the physical address.
*/
diff --git a/include/asm-x86/kvm_host.h b/include/asm-x86/kvm_host.h
index 9d963cd..1d8cd01 100644
--- a/include/asm-x86/kvm_host.h
+++ b/include/asm-x86/kvm_host.h
@@ -314,6 +314,9 @@
struct page *apic_access_page;
gpa_t wall_clock;
+
+ struct page *ept_identity_pagetable;
+ bool ept_identity_pagetable_done;
};
struct kvm_vm_stat {
@@ -422,6 +425,7 @@
struct kvm_run *run);
int (*set_tss_addr)(struct kvm *kvm, unsigned int addr);
+ int (*get_tdp_level)(void);
};
extern struct kvm_x86_ops *kvm_x86_ops;
@@ -433,6 +437,9 @@
int kvm_mmu_create(struct kvm_vcpu *vcpu);
int kvm_mmu_setup(struct kvm_vcpu *vcpu);
void kvm_mmu_set_nonpresent_ptes(u64 trap_pte, u64 notrap_pte);
+void kvm_mmu_set_base_ptes(u64 base_pte);
+void kvm_mmu_set_mask_ptes(u64 user_mask, u64 accessed_mask,
+ u64 dirty_mask, u64 nx_mask, u64 x_mask);
int kvm_mmu_reset_context(struct kvm_vcpu *vcpu);
void kvm_mmu_slot_remove_write_access(struct kvm *kvm, int slot);
@@ -620,7 +627,7 @@
asm("fxrstor (%0)":: "r" (image));
}
-static inline void fpu_init(void)
+static inline void fx_finit(void)
{
asm("finit");
}
@@ -644,6 +651,7 @@
#define ASM_VMX_VMWRITE_RSP_RDX ".byte 0x0f, 0x79, 0xd4"
#define ASM_VMX_VMXOFF ".byte 0x0f, 0x01, 0xc4"
#define ASM_VMX_VMXON_RAX ".byte 0xf3, 0x0f, 0xc7, 0x30"
+#define ASM_VMX_INVEPT ".byte 0x66, 0x0f, 0x38, 0x80, 0x08"
#define ASM_VMX_INVVPID ".byte 0x66, 0x0f, 0x38, 0x81, 0x08"
#define MSR_IA32_TIME_STAMP_COUNTER 0x010
diff --git a/include/asm-x86/pat.h b/include/asm-x86/pat.h
index 8b822b5..88f60cc 100644
--- a/include/asm-x86/pat.h
+++ b/include/asm-x86/pat.h
@@ -4,7 +4,13 @@
#include <linux/types.h>
+#ifdef CONFIG_X86_PAT
extern int pat_wc_enabled;
+extern void validate_pat_support(struct cpuinfo_x86 *c);
+#else
+static const int pat_wc_enabled = 0;
+static inline void validate_pat_support(struct cpuinfo_x86 *c) { }
+#endif
extern void pat_init(void);
@@ -12,5 +18,7 @@
unsigned long req_type, unsigned long *ret_type);
extern int free_memtype(u64 start, u64 end);
+extern void pat_disable(char *reason);
+
#endif
diff --git a/include/asm-x86/pgtable_32.h b/include/asm-x86/pgtable_32.h
index 577ab79..d7f0403 100644
--- a/include/asm-x86/pgtable_32.h
+++ b/include/asm-x86/pgtable_32.h
@@ -88,14 +88,7 @@
/* To avoid harmful races, pmd_none(x) should check only the lower when PAE */
#define pmd_none(x) (!(unsigned long)pmd_val((x)))
#define pmd_present(x) (pmd_val((x)) & _PAGE_PRESENT)
-
-extern int pmd_bad(pmd_t pmd);
-
-#define pmd_bad_v1(x) \
- (_KERNPG_TABLE != (pmd_val((x)) & ~(PAGE_MASK | _PAGE_USER)))
-#define pmd_bad_v2(x) \
- (_KERNPG_TABLE != (pmd_val((x)) & ~(PAGE_MASK | _PAGE_USER | \
- _PAGE_PSE | _PAGE_NX)))
+#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
diff --git a/include/asm-x86/pgtable_64.h b/include/asm-x86/pgtable_64.h
index a3bbf87..efe83dc 100644
--- a/include/asm-x86/pgtable_64.h
+++ b/include/asm-x86/pgtable_64.h
@@ -158,14 +158,12 @@
static inline unsigned long pud_bad(pud_t pud)
{
- return pud_val(pud) &
- ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER | _PAGE_PSE | _PAGE_NX);
+ return pud_val(pud) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER);
}
static inline unsigned long pmd_bad(pmd_t pmd)
{
- return pmd_val(pmd) &
- ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER | _PAGE_PSE | _PAGE_NX);
+ return pmd_val(pmd) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER);
}
#define pte_none(x) (!pte_val((x)))
diff --git a/include/asm-x86/spinlock.h b/include/asm-x86/spinlock.h
index bc6376f..21e89bf 100644
--- a/include/asm-x86/spinlock.h
+++ b/include/asm-x86/spinlock.h
@@ -20,18 +20,8 @@
*/
#ifdef CONFIG_X86_32
-typedef char _slock_t;
-# define LOCK_INS_DEC "decb"
-# define LOCK_INS_XCH "xchgb"
-# define LOCK_INS_MOV "movb"
-# define LOCK_INS_CMP "cmpb"
# define LOCK_PTR_REG "a"
#else
-typedef int _slock_t;
-# define LOCK_INS_DEC "decl"
-# define LOCK_INS_XCH "xchgl"
-# define LOCK_INS_MOV "movl"
-# define LOCK_INS_CMP "cmpl"
# define LOCK_PTR_REG "D"
#endif
@@ -66,14 +56,14 @@
#if (NR_CPUS < 256)
static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
{
- int tmp = *(volatile signed int *)(&(lock)->slock);
+ int tmp = ACCESS_ONCE(lock->slock);
return (((tmp >> 8) & 0xff) != (tmp & 0xff));
}
static inline int __raw_spin_is_contended(raw_spinlock_t *lock)
{
- int tmp = *(volatile signed int *)(&(lock)->slock);
+ int tmp = ACCESS_ONCE(lock->slock);
return (((tmp >> 8) & 0xff) - (tmp & 0xff)) > 1;
}
@@ -130,14 +120,14 @@
#else
static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
{
- int tmp = *(volatile signed int *)(&(lock)->slock);
+ int tmp = ACCESS_ONCE(lock->slock);
return (((tmp >> 16) & 0xffff) != (tmp & 0xffff));
}
static inline int __raw_spin_is_contended(raw_spinlock_t *lock)
{
- int tmp = *(volatile signed int *)(&(lock)->slock);
+ int tmp = ACCESS_ONCE(lock->slock);
return (((tmp >> 16) & 0xffff) - (tmp & 0xffff)) > 1;
}
diff --git a/include/asm-x86/topology.h b/include/asm-x86/topology.h
index 4f35a0f..dcf3f81 100644
--- a/include/asm-x86/topology.h
+++ b/include/asm-x86/topology.h
@@ -25,6 +25,16 @@
#ifndef _ASM_X86_TOPOLOGY_H
#define _ASM_X86_TOPOLOGY_H
+#ifdef CONFIG_X86_32
+# ifdef CONFIG_X86_HT
+# define ENABLE_TOPO_DEFINES
+# endif
+#else
+# ifdef CONFIG_SMP
+# define ENABLE_TOPO_DEFINES
+# endif
+#endif
+
#ifdef CONFIG_NUMA
#include <linux/cpumask.h>
#include <asm/mpspec.h>
@@ -130,10 +140,6 @@
extern unsigned long node_remap_size[];
#define node_has_online_mem(nid) (node_start_pfn[nid] != node_end_pfn[nid])
-# ifdef CONFIG_X86_HT
-# define ENABLE_TOPO_DEFINES
-# endif
-
# define SD_CACHE_NICE_TRIES 1
# define SD_IDLE_IDX 1
# define SD_NEWIDLE_IDX 2
@@ -141,10 +147,6 @@
#else
-# ifdef CONFIG_SMP
-# define ENABLE_TOPO_DEFINES
-# endif
-
# define SD_CACHE_NICE_TRIES 2
# define SD_IDLE_IDX 2
# define SD_NEWIDLE_IDX 2
diff --git a/include/asm-x86/types.h b/include/asm-x86/types.h
index 63733f3..1ac80cd 100644
--- a/include/asm-x86/types.h
+++ b/include/asm-x86/types.h
@@ -1,34 +1,12 @@
#ifndef _ASM_X86_TYPES_H
#define _ASM_X86_TYPES_H
+#include <asm-generic/int-ll64.h>
+
#ifndef __ASSEMBLY__
typedef unsigned short umode_t;
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#ifdef __i386__
-# ifdef __GNUC__
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-# endif
-#else
-typedef __signed__ long long __s64;
-typedef unsigned long long __u64;
-#endif
-
#endif /* __ASSEMBLY__ */
/*
@@ -44,18 +22,6 @@
#ifndef __ASSEMBLY__
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
typedef u64 dma64_addr_t;
#if defined(CONFIG_X86_64) || defined(CONFIG_HIGHMEM64G)
/* DMA addresses come in 32-bit and 64-bit flavours. */
diff --git a/include/asm-xtensa/types.h b/include/asm-xtensa/types.h
index b27d841..c89569a 100644
--- a/include/asm-xtensa/types.h
+++ b/include/asm-xtensa/types.h
@@ -11,6 +11,7 @@
#ifndef _XTENSA_TYPES_H
#define _XTENSA_TYPES_H
+#include <asm-generic/int-ll64.h>
#ifdef __ASSEMBLY__
# define __XTENSA_UL(x) (x)
@@ -25,42 +26,10 @@
typedef unsigned short umode_t;
/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
-/*
* These aren't exported outside the kernel to avoid name space clashes
*/
#ifdef __KERNEL__
-typedef __signed__ char s8;
-typedef unsigned char u8;
-
-typedef __signed__ short s16;
-typedef unsigned short u16;
-
-typedef __signed__ int s32;
-typedef unsigned int u32;
-
-typedef __signed__ long long s64;
-typedef unsigned long long u64;
-
-
#define BITS_PER_LONG 32
/* Dma addresses are 32-bits wide. */
diff --git a/include/crypto/scatterwalk.h b/include/crypto/scatterwalk.h
index 224658b..833d208 100644
--- a/include/crypto/scatterwalk.h
+++ b/include/crypto/scatterwalk.h
@@ -57,10 +57,14 @@
struct scatterlist *sg2)
{
sg_set_page(&sg1[num - 1], (void *)sg2, 0, 0);
+ sg1[num - 1].page_link &= ~0x02;
}
static inline struct scatterlist *scatterwalk_sg_next(struct scatterlist *sg)
{
+ if (sg_is_last(sg))
+ return NULL;
+
return (++sg)->length ? sg : (void *)sg_page(sg);
}
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 78fade0..b7d81b2 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -346,6 +346,11 @@
unifdef-y += virtio_config.h
unifdef-y += virtio_blk.h
unifdef-y += virtio_net.h
+unifdef-y += virtio_9p.h
+unifdef-y += virtio_balloon.h
+unifdef-y += virtio_console.h
+unifdef-y += virtio_pci.h
+unifdef-y += virtio_ring.h
unifdef-y += vt.h
unifdef-y += wait.h
unifdef-y += wanrouter.h
diff --git a/include/linux/anon_inodes.h b/include/linux/anon_inodes.h
index b2e1ba3..6129e58 100644
--- a/include/linux/anon_inodes.h
+++ b/include/linux/anon_inodes.h
@@ -8,8 +8,7 @@
#ifndef _LINUX_ANON_INODES_H
#define _LINUX_ANON_INODES_H
-int anon_inode_getfd(int *pfd, struct inode **pinode, struct file **pfile,
- const char *name, const struct file_operations *fops,
+int anon_inode_getfd(const char *name, const struct file_operations *fops,
void *priv);
#endif /* _LINUX_ANON_INODES_H */
diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h
index 43b406d..1abfe66 100644
--- a/include/linux/bitmap.h
+++ b/include/linux/bitmap.h
@@ -110,7 +110,6 @@
extern int bitmap_scnprintf(char *buf, unsigned int len,
const unsigned long *src, int nbits);
-extern int bitmap_scnprintf_len(unsigned int len);
extern int __bitmap_parse(const char *buf, unsigned int buflen, int is_user,
unsigned long *dst, int nbits);
extern int bitmap_parse_user(const char __user *ubuf, unsigned int ulen,
diff --git a/include/linux/calc64.h b/include/linux/calc64.h
deleted file mode 100644
index ebf4b8f..0000000
--- a/include/linux/calc64.h
+++ /dev/null
@@ -1,49 +0,0 @@
-#ifndef _LINUX_CALC64_H
-#define _LINUX_CALC64_H
-
-#include <linux/types.h>
-#include <asm/div64.h>
-
-/*
- * This is a generic macro which is used when the architecture
- * specific div64.h does not provide a optimized one.
- *
- * The 64bit dividend is divided by the divisor (data type long), the
- * result is returned and the remainder stored in the variable
- * referenced by remainder (data type long *). In contrast to the
- * do_div macro the dividend is kept intact.
- */
-#ifndef div_long_long_rem
-#define div_long_long_rem(dividend, divisor, remainder) \
- do_div_llr((dividend), divisor, remainder)
-
-static inline unsigned long do_div_llr(const long long dividend,
- const long divisor, long *remainder)
-{
- u64 result = dividend;
-
- *(remainder) = do_div(result, divisor);
- return (unsigned long) result;
-}
-#endif
-
-/*
- * Sign aware variation of the above. On some architectures a
- * negative dividend leads to an divide overflow exception, which
- * is avoided by the sign check.
- */
-static inline long div_long_long_rem_signed(const long long dividend,
- const long divisor, long *remainder)
-{
- long res;
-
- if (unlikely(dividend < 0)) {
- res = -div_long_long_rem(-dividend, divisor, remainder);
- *remainder = -(*remainder);
- } else
- res = div_long_long_rem(dividend, divisor, remainder);
-
- return res;
-}
-
-#endif
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 3509447..55e434f 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -93,6 +93,8 @@
#endif
};
+extern struct clocksource *clock; /* current clocksource */
+
/*
* Clock source flags bits::
*/
diff --git a/include/linux/compat.h b/include/linux/compat.h
index 8fa7857..cf8d11c 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -65,10 +65,11 @@
compat_long_t calcnt;
compat_long_t errcnt;
compat_long_t stbcnt;
+ compat_int_t tai;
compat_int_t :32; compat_int_t :32; compat_int_t :32; compat_int_t :32;
compat_int_t :32; compat_int_t :32; compat_int_t :32; compat_int_t :32;
- compat_int_t :32; compat_int_t :32; compat_int_t :32; compat_int_t :32;
+ compat_int_t :32; compat_int_t :32; compat_int_t :32;
};
#define _COMPAT_NSIG_WORDS (_COMPAT_NSIG / _COMPAT_NSIG_BPW)
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index dcae0c8..c8bd2da 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -182,4 +182,16 @@
# define __section(S) __attribute__ ((__section__(#S)))
#endif
+/*
+ * Prevent the compiler from merging or refetching accesses. The compiler
+ * is also forbidden from reordering successive instances of ACCESS_ONCE(),
+ * but only when the compiler is aware of some particular ordering. One way
+ * to make the compiler aware of ordering is to put the two invocations of
+ * ACCESS_ONCE() in different C statements.
+ *
+ * This macro does absolutely -nothing- to prevent the CPU from reordering,
+ * merging, or refetching absolutely anything at any time.
+ */
+#define ACCESS_ONCE(x) (*(volatile typeof(x) *)&(x))
+
#endif /* __LINUX_COMPILER_H */
diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index 9650806..5df3db5 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -289,13 +289,6 @@
return bitmap_scnprintf(buf, len, srcp->bits, nbits);
}
-#define cpumask_scnprintf_len(len) \
- __cpumask_scnprintf_len((len))
-static inline int __cpumask_scnprintf_len(int len)
-{
- return bitmap_scnprintf_len(len);
-}
-
#define cpumask_parse_user(ubuf, ulen, dst) \
__cpumask_parse_user((ubuf), (ulen), &(dst), NR_CPUS)
static inline int __cpumask_parse_user(const char __user *buf, int len,
diff --git a/include/linux/device.h b/include/linux/device.h
index 832fb0e..8c23e3d 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -380,6 +380,12 @@
/* Get the wakeup routines, which depend on struct device */
#include <linux/pm_wakeup.h>
+static inline const char *dev_name(struct device *dev)
+{
+ /* will be changed into kobject_name(&dev->kobj) in the near future */
+ return dev->bus_id;
+}
+
#ifdef CONFIG_NUMA
static inline int dev_to_node(struct device *dev)
{
@@ -478,7 +484,7 @@
extern const char *dev_driver_string(struct device *dev);
#define dev_printk(level, dev, format, arg...) \
printk(level "%s %s: " format , dev_driver_string(dev) , \
- (dev)->bus_id , ## arg)
+ dev_name(dev) , ## arg)
#define dev_emerg(dev, format, arg...) \
dev_printk(KERN_EMERG , dev , format , ## arg)
diff --git a/include/linux/exportfs.h b/include/linux/exportfs.h
index de8387b..f5abd13 100644
--- a/include/linux/exportfs.h
+++ b/include/linux/exportfs.h
@@ -33,6 +33,19 @@
* 32 bit parent directory inode number.
*/
FILEID_INO32_GEN_PARENT = 2,
+
+ /*
+ * 32 bit block number, 16 bit partition reference,
+ * 16 bit unused, 32 bit generation number.
+ */
+ FILEID_UDF_WITHOUT_PARENT = 0x51,
+
+ /*
+ * 32 bit block number, 16 bit partition reference,
+ * 16 bit unused, 32 bit generation number,
+ * 32 bit parent block number, 32 bit parent generation number
+ */
+ FILEID_UDF_WITH_PARENT = 0x52,
};
struct fid {
@@ -43,6 +56,14 @@
u32 parent_ino;
u32 parent_gen;
} i32;
+ struct {
+ u32 block;
+ u16 partref;
+ u16 parent_partref;
+ u32 generation;
+ u32 parent_block;
+ u32 parent_generation;
+ } udf;
__u32 raw[0];
};
};
diff --git a/include/linux/fdtable.h b/include/linux/fdtable.h
new file mode 100644
index 0000000..a118f3c
--- /dev/null
+++ b/include/linux/fdtable.h
@@ -0,0 +1,99 @@
+/*
+ * descriptor table internals; you almost certainly want file.h instead.
+ */
+
+#ifndef __LINUX_FDTABLE_H
+#define __LINUX_FDTABLE_H
+
+#include <asm/atomic.h>
+#include <linux/posix_types.h>
+#include <linux/compiler.h>
+#include <linux/spinlock.h>
+#include <linux/rcupdate.h>
+#include <linux/types.h>
+
+/*
+ * The default fd array needs to be at least BITS_PER_LONG,
+ * as this is the granularity returned by copy_fdset().
+ */
+#define NR_OPEN_DEFAULT BITS_PER_LONG
+
+/*
+ * The embedded_fd_set is a small fd_set,
+ * suitable for most tasks (which open <= BITS_PER_LONG files)
+ */
+struct embedded_fd_set {
+ unsigned long fds_bits[1];
+};
+
+struct fdtable {
+ unsigned int max_fds;
+ struct file ** fd; /* current fd array */
+ fd_set *close_on_exec;
+ fd_set *open_fds;
+ struct rcu_head rcu;
+ struct fdtable *next;
+};
+
+/*
+ * Open file table structure
+ */
+struct files_struct {
+ /*
+ * read mostly part
+ */
+ atomic_t count;
+ struct fdtable *fdt;
+ struct fdtable fdtab;
+ /*
+ * written part on a separate cache line in SMP
+ */
+ spinlock_t file_lock ____cacheline_aligned_in_smp;
+ int next_fd;
+ struct embedded_fd_set close_on_exec_init;
+ struct embedded_fd_set open_fds_init;
+ struct file * fd_array[NR_OPEN_DEFAULT];
+};
+
+#define files_fdtable(files) (rcu_dereference((files)->fdt))
+
+extern struct kmem_cache *filp_cachep;
+
+struct file_operations;
+struct vfsmount;
+struct dentry;
+
+extern int expand_files(struct files_struct *, int nr);
+extern void free_fdtable_rcu(struct rcu_head *rcu);
+extern void __init files_defer_init(void);
+
+static inline void free_fdtable(struct fdtable *fdt)
+{
+ call_rcu(&fdt->rcu, free_fdtable_rcu);
+}
+
+static inline struct file * fcheck_files(struct files_struct *files, unsigned int fd)
+{
+ struct file * file = NULL;
+ struct fdtable *fdt = files_fdtable(files);
+
+ if (fd < fdt->max_fds)
+ file = rcu_dereference(fdt->fd[fd]);
+ return file;
+}
+
+/*
+ * Check whether the specified fd has an open file.
+ */
+#define fcheck(fd) fcheck_files(current->files, fd)
+
+struct task_struct;
+
+struct files_struct *get_files_struct(struct task_struct *);
+void put_files_struct(struct files_struct *fs);
+void reset_files_struct(struct files_struct *);
+int unshare_files(struct files_struct **);
+
+extern struct kmem_cache *files_cachep;
+
+#endif /* __LINUX_FDTABLE_H */
diff --git a/include/linux/file.h b/include/linux/file.h
index 69baf5a4..27c64bd 100644
--- a/include/linux/file.h
+++ b/include/linux/file.h
@@ -5,59 +5,11 @@
#ifndef __LINUX_FILE_H
#define __LINUX_FILE_H
-#include <asm/atomic.h>
-#include <linux/posix_types.h>
#include <linux/compiler.h>
-#include <linux/spinlock.h>
-#include <linux/rcupdate.h>
#include <linux/types.h>
+#include <linux/posix_types.h>
-/*
- * The default fd array needs to be at least BITS_PER_LONG,
- * as this is the granularity returned by copy_fdset().
- */
-#define NR_OPEN_DEFAULT BITS_PER_LONG
-
-/*
- * The embedded_fd_set is a small fd_set,
- * suitable for most tasks (which open <= BITS_PER_LONG files)
- */
-struct embedded_fd_set {
- unsigned long fds_bits[1];
-};
-
-struct fdtable {
- unsigned int max_fds;
- struct file ** fd; /* current fd array */
- fd_set *close_on_exec;
- fd_set *open_fds;
- struct rcu_head rcu;
- struct fdtable *next;
-};
-
-/*
- * Open file table structure
- */
-struct files_struct {
- /*
- * read mostly part
- */
- atomic_t count;
- struct fdtable *fdt;
- struct fdtable fdtab;
- /*
- * written part on a separate cache line in SMP
- */
- spinlock_t file_lock ____cacheline_aligned_in_smp;
- int next_fd;
- struct embedded_fd_set close_on_exec_init;
- struct embedded_fd_set open_fds_init;
- struct file * fd_array[NR_OPEN_DEFAULT];
-};
-
-#define files_fdtable(files) (rcu_dereference((files)->fdt))
-
-extern struct kmem_cache *filp_cachep;
+struct file;
extern void __fput(struct file *);
extern void fput(struct file *);
@@ -85,41 +37,7 @@
extern int get_unused_fd(void);
extern int get_unused_fd_flags(int flags);
extern void put_unused_fd(unsigned int fd);
-struct kmem_cache;
-
-extern int expand_files(struct files_struct *, int nr);
-extern void free_fdtable_rcu(struct rcu_head *rcu);
-extern void __init files_defer_init(void);
-
-static inline void free_fdtable(struct fdtable *fdt)
-{
- call_rcu(&fdt->rcu, free_fdtable_rcu);
-}
-
-static inline struct file * fcheck_files(struct files_struct *files, unsigned int fd)
-{
- struct file * file = NULL;
- struct fdtable *fdt = files_fdtable(files);
-
- if (fd < fdt->max_fds)
- file = rcu_dereference(fdt->fd[fd]);
- return file;
-}
-
-/*
- * Check whether the specified fd has an open file.
- */
-#define fcheck(fd) fcheck_files(current->files, fd)
extern void fd_install(unsigned int fd, struct file *file);
-struct task_struct;
-
-struct files_struct *get_files_struct(struct task_struct *);
-void put_files_struct(struct files_struct *fs);
-void reset_files_struct(struct files_struct *);
-int unshare_files(struct files_struct **);
-
-extern struct kmem_cache *files_cachep;
-
#endif /* __LINUX_FILE_H */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index a1ba005..f413085 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1289,17 +1289,12 @@
extern ssize_t vfs_writev(struct file *, const struct iovec __user *,
unsigned long, loff_t *);
-/*
- * NOTE: write_inode, delete_inode, clear_inode, put_inode can be called
- * without the big kernel lock held in all filesystems.
- */
struct super_operations {
struct inode *(*alloc_inode)(struct super_block *sb);
void (*destroy_inode)(struct inode *);
void (*dirty_inode) (struct inode *);
int (*write_inode) (struct inode *, int);
- void (*put_inode) (struct inode *);
void (*drop_inode) (struct inode *);
void (*delete_inode) (struct inode *);
void (*put_super) (struct super_block *);
@@ -1821,7 +1816,6 @@
extern void clear_inode(struct inode *);
extern void destroy_inode(struct inode *);
extern struct inode *new_inode(struct super_block *);
-extern int __remove_suid(struct dentry *, int);
extern int should_remove_suid(struct dentry *);
extern int remove_suid(struct dentry *);
diff --git a/include/linux/fuse.h b/include/linux/fuse.h
index 5c86f11..d482821 100644
--- a/include/linux/fuse.h
+++ b/include/linux/fuse.h
@@ -109,6 +109,7 @@
#define FUSE_POSIX_LOCKS (1 << 1)
#define FUSE_FILE_OPS (1 << 2)
#define FUSE_ATOMIC_O_TRUNC (1 << 3)
+#define FUSE_BIG_WRITES (1 << 5)
/**
* Release flags
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index ecd2bf6..e9874e7 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -178,17 +178,17 @@
static inline void disk_stat_set_all(struct gendisk *gendiskp, int value) {
int i;
+
for_each_possible_cpu(i)
memset(per_cpu_ptr(gendiskp->dkstats, i), value,
- sizeof (struct disk_stats));
+ sizeof(struct disk_stats));
}
#define __part_stat_add(part, field, addnd) \
(per_cpu_ptr(part->dkstats, smp_processor_id())->field += addnd)
-#define __all_stat_add(gendiskp, field, addnd, sector) \
+#define __all_stat_add(gendiskp, part, field, addnd, sector) \
({ \
- struct hd_struct *part = get_part(gendiskp, sector); \
if (part) \
__part_stat_add(part, field, addnd); \
__disk_stat_add(gendiskp, field, addnd); \
@@ -203,11 +203,13 @@
res; \
})
-static inline void part_stat_set_all(struct hd_struct *part, int value) {
+static inline void part_stat_set_all(struct hd_struct *part, int value)
+{
int i;
+
for_each_possible_cpu(i)
memset(per_cpu_ptr(part->dkstats, i), value,
- sizeof(struct disk_stats));
+ sizeof(struct disk_stats));
}
#else /* !CONFIG_SMP */
@@ -223,9 +225,8 @@
#define __part_stat_add(part, field, addnd) \
(part->dkstats.field += addnd)
-#define __all_stat_add(gendiskp, field, addnd, sector) \
+#define __all_stat_add(gendiskp, part, field, addnd, sector) \
({ \
- struct hd_struct *part = get_part(gendiskp, sector); \
if (part) \
part->dkstats.field += addnd; \
__disk_stat_add(gendiskp, field, addnd); \
@@ -276,10 +277,10 @@
#define part_stat_sub(gendiskp, field, subnd) \
part_stat_add(gendiskp, field, -subnd)
-#define all_stat_add(gendiskp, field, addnd, sector) \
+#define all_stat_add(gendiskp, part, field, addnd, sector) \
do { \
preempt_disable(); \
- __all_stat_add(gendiskp, field, addnd, sector); \
+ __all_stat_add(gendiskp, part, field, addnd, sector); \
preempt_enable(); \
} while (0)
@@ -288,15 +289,15 @@
#define all_stat_dec(gendiskp, field, sector) \
all_stat_add(gendiskp, field, -1, sector)
-#define __all_stat_inc(gendiskp, field, sector) \
- __all_stat_add(gendiskp, field, 1, sector)
-#define all_stat_inc(gendiskp, field, sector) \
- all_stat_add(gendiskp, field, 1, sector)
+#define __all_stat_inc(gendiskp, part, field, sector) \
+ __all_stat_add(gendiskp, part, field, 1, sector)
+#define all_stat_inc(gendiskp, part, field, sector) \
+ all_stat_add(gendiskp, part, field, 1, sector)
-#define __all_stat_sub(gendiskp, field, subnd, sector) \
- __all_stat_add(gendiskp, field, -subnd, sector)
-#define all_stat_sub(gendiskp, field, subnd, sector) \
- all_stat_add(gendiskp, field, -subnd, sector)
+#define __all_stat_sub(gendiskp, part, field, subnd, sector) \
+ __all_stat_add(gendiskp, part, field, -subnd, sector)
+#define all_stat_sub(gendiskp, part, field, subnd, sector) \
+ all_stat_add(gendiskp, part, field, -subnd, sector)
/* Inlines to alloc and free disk stats in struct gendisk */
#ifdef CONFIG_SMP
diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index 897f723..181006c 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -72,6 +72,14 @@
#define in_softirq() (softirq_count())
#define in_interrupt() (irq_count())
+#if defined(CONFIG_PREEMPT)
+# define PREEMPT_INATOMIC_BASE kernel_locked()
+# define PREEMPT_CHECK_OFFSET 1
+#else
+# define PREEMPT_INATOMIC_BASE 0
+# define PREEMPT_CHECK_OFFSET 0
+#endif
+
/*
* Are we running in atomic context? WARNING: this macro cannot
* always detect atomic context; in particular, it cannot know about
@@ -79,17 +87,11 @@
* used in the general case to determine whether sleeping is possible.
* Do not use in_atomic() in driver code.
*/
-#define in_atomic() ((preempt_count() & ~PREEMPT_ACTIVE) != 0)
-
-#ifdef CONFIG_PREEMPT
-# define PREEMPT_CHECK_OFFSET 1
-#else
-# define PREEMPT_CHECK_OFFSET 0
-#endif
+#define in_atomic() ((preempt_count() & ~PREEMPT_ACTIVE) != PREEMPT_INATOMIC_BASE)
/*
* Check whether we were atomic before we did preempt_disable():
- * (used by the scheduler)
+ * (used by the scheduler, *after* releasing the kernel lock)
*/
#define in_atomic_preempt_off() \
((preempt_count() & ~PREEMPT_ACTIVE) != PREEMPT_CHECK_OFFSET)
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 31a4d65..6d93dce 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -316,6 +316,15 @@
(HRTIMER_STATE_ENQUEUED | HRTIMER_STATE_PENDING);
}
+/*
+ * Helper function to check, whether the timer is running the callback
+ * function
+ */
+static inline int hrtimer_callback_running(struct hrtimer *timer)
+{
+ return timer->state & HRTIMER_STATE_CALLBACK;
+}
+
/* Forward a hrtimer so it expires after now: */
extern u64
hrtimer_forward(struct hrtimer *timer, ktime_t now, ktime_t interval);
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index cb63da5..6716ec8 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -262,7 +262,7 @@
* client handles for the extra addresses.
*/
extern struct i2c_client *
-i2c_new_dummy(struct i2c_adapter *adap, u16 address, const char *type);
+i2c_new_dummy(struct i2c_adapter *adap, u16 address);
extern void i2c_unregister_device(struct i2c_client *);
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index bf6b8a6..b24c287 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -1,7 +1,7 @@
#ifndef _LINUX__INIT_TASK_H
#define _LINUX__INIT_TASK_H
-#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/rcupdate.h>
#include <linux/irqflags.h>
#include <linux/utsname.h>
diff --git a/include/linux/io.h b/include/linux/io.h
index 3a03a36..6c7f0ba 100644
--- a/include/linux/io.h
+++ b/include/linux/io.h
@@ -65,5 +65,6 @@
void devm_iounmap(struct device *dev, void __iomem *addr);
int check_signature(const volatile void __iomem *io_addr,
const unsigned char *signature, int length);
+void devm_ioremap_release(struct device *dev, void *res);
#endif /* _LINUX_IO_H */
diff --git a/include/linux/ioprio.h b/include/linux/ioprio.h
index 2a3bb1b..f98a656 100644
--- a/include/linux/ioprio.h
+++ b/include/linux/ioprio.h
@@ -68,6 +68,20 @@
}
/*
+ * This is for the case where the task hasn't asked for a specific IO class.
+ * Check for idle and rt task process, and return appropriate IO class.
+ */
+static inline int task_nice_ioclass(struct task_struct *task)
+{
+ if (task->policy == SCHED_IDLE)
+ return IOPRIO_CLASS_IDLE;
+ else if (task->policy == SCHED_FIFO || task->policy == SCHED_RR)
+ return IOPRIO_CLASS_RT;
+ else
+ return IOPRIO_CLASS_BE;
+}
+
+/*
* For inheritance, return the highest of the two given priorities
*/
extern int ioprio_best(unsigned short aprio, unsigned short bprio);
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 1883a85..552e0ec 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -61,6 +61,7 @@
#define IRQ_WAKEUP 0x00100000 /* IRQ triggers system wakeup */
#define IRQ_MOVE_PENDING 0x00200000 /* need to re-target IRQ destination */
#define IRQ_NO_BALANCING 0x00400000 /* IRQ is excluded from balancing */
+#define IRQ_SPURIOUS_DISABLED 0x00800000 /* IRQ was disabled by the spurious trap */
#ifdef CONFIG_IRQ_PER_CPU
# define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU)
diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
index 33ef710..abb6ac6 100644
--- a/include/linux/jiffies.h
+++ b/include/linux/jiffies.h
@@ -1,7 +1,7 @@
#ifndef _LINUX_JIFFIES_H
#define _LINUX_JIFFIES_H
-#include <linux/calc64.h>
+#include <linux/math64.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/time.h>
diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h
index 9757b1a..6adcc29 100644
--- a/include/linux/kgdb.h
+++ b/include/linux/kgdb.h
@@ -261,10 +261,12 @@
extern struct kgdb_arch arch_kgdb_ops;
+extern unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs);
+
extern int kgdb_register_io_module(struct kgdb_io *local_kgdb_io_ops);
extern void kgdb_unregister_io_module(struct kgdb_io *local_kgdb_io_ops);
-extern int kgdb_hex2long(char **ptr, long *long_val);
+extern int kgdb_hex2long(char **ptr, unsigned long *long_val);
extern int kgdb_mem2hex(char *mem, char *buf, int count);
extern int kgdb_hex2mem(char *buf, char *mem, int count);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index d1dfe87..0f17643 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1039,6 +1039,7 @@
extern void ata_eh_qc_complete(struct ata_queued_cmd *qc);
extern void ata_eh_qc_retry(struct ata_queued_cmd *qc);
+extern void ata_eh_analyze_ncq_error(struct ata_link *link);
extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
@@ -1381,6 +1382,18 @@
return *(struct ata_port **)&host->hostdata[0];
}
+static inline int ata_check_ready(u8 status)
+{
+ if (!(status & ATA_BUSY))
+ return 1;
+
+ /* 0xff indicates either no device or device not ready */
+ if (status == 0xff)
+ return -ENODEV;
+
+ return 0;
+}
+
/**************************************************************************
* PMP - drivers/ata/libata-pmp.c
diff --git a/include/linux/math64.h b/include/linux/math64.h
new file mode 100644
index 0000000..c1a5f81
--- /dev/null
+++ b/include/linux/math64.h
@@ -0,0 +1,84 @@
+#ifndef _LINUX_MATH64_H
+#define _LINUX_MATH64_H
+
+#include <linux/types.h>
+#include <asm/div64.h>
+
+#if BITS_PER_LONG == 64
+
+/**
+ * div_u64_rem - unsigned 64bit divide with 32bit divisor with remainder
+ *
+ * This is commonly provided by 32bit archs to provide an optimized 64bit
+ * divide.
+ */
+static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder)
+{
+ *remainder = dividend % divisor;
+ return dividend / divisor;
+}
+
+/**
+ * div_s64_rem - signed 64bit divide with 32bit divisor with remainder
+ */
+static inline s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder)
+{
+ *remainder = dividend % divisor;
+ return dividend / divisor;
+}
+
+/**
+ * div64_u64 - unsigned 64bit divide with 64bit divisor
+ */
+static inline u64 div64_u64(u64 dividend, u64 divisor)
+{
+ return dividend / divisor;
+}
+
+#elif BITS_PER_LONG == 32
+
+#ifndef div_u64_rem
+static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder)
+{
+ *remainder = do_div(dividend, divisor);
+ return dividend;
+}
+#endif
+
+#ifndef div_s64_rem
+extern s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder);
+#endif
+
+#ifndef div64_u64
+extern u64 div64_u64(u64 dividend, u64 divisor);
+#endif
+
+#endif /* BITS_PER_LONG */
+
+/**
+ * div_u64 - unsigned 64bit divide with 32bit divisor
+ *
+ * This is the most common 64bit divide and should be used if possible,
+ * as many 32bit archs can optimize this variant better than a full 64bit
+ * divide.
+ */
+#ifndef div_u64
+static inline u64 div_u64(u64 dividend, u32 divisor)
+{
+ u32 remainder;
+ return div_u64_rem(dividend, divisor, &remainder);
+}
+#endif
+
+/**
+ * div_s64 - signed 64bit divide with 32bit divisor
+ */
+#ifndef div_s64
+static inline s64 div_s64(s64 dividend, s32 divisor)
+{
+ s32 remainder;
+ return div_s64_rem(dividend, divisor, &remainder);
+}
+#endif
+
+#endif /* _LINUX_MATH64_H */
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index eb7c16c..02a27ae7 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -226,8 +226,17 @@
rwlock_t ioctx_list_lock; /* aio lock */
struct kioctx *ioctx_list;
#ifdef CONFIG_MM_OWNER
- struct task_struct *owner; /* The thread group leader that */
- /* owns the mm_struct. */
+ /*
+ * "owner" points to a task that is regarded as the canonical
+ * user/owner of this mm. All of the following must be true in
+ * order for it to be changed:
+ *
+ * current == mm->owner
+ * current->mm != mm
+ * new_owner->mm == mm
+ * new_owner->alloc_lock is held
+ */
+ struct task_struct *owner;
#endif
#ifdef CONFIG_PROC_FS
diff --git a/include/linux/module.h b/include/linux/module.h
index 819c4e8..3e03b1a 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -190,7 +190,7 @@
extern typeof(sym) sym; \
__CRC_SYMBOL(sym, sec) \
static const char __kstrtab_##sym[] \
- __attribute__((section("__ksymtab_strings"))) \
+ __attribute__((section("__ksymtab_strings"), aligned(1))) \
= MODULE_SYMBOL_PREFIX #sym; \
static const struct kernel_symbol __ksymtab_##sym \
__used \
@@ -229,23 +229,6 @@
MODULE_STATE_GOING,
};
-/* Similar stuff for section attributes. */
-struct module_sect_attr
-{
- struct module_attribute mattr;
- char *name;
- unsigned long address;
-};
-
-struct module_sect_attrs
-{
- struct attribute_group grp;
- int nsections;
- struct module_sect_attr attrs[0];
-};
-
-struct module_param_attrs;
-
struct module
{
enum module_state state;
diff --git a/include/linux/mtd/jedec.h b/include/linux/mtd/jedec.h
deleted file mode 100644
index 9006feb..0000000
--- a/include/linux/mtd/jedec.h
+++ /dev/null
@@ -1,66 +0,0 @@
-
-/* JEDEC Flash Interface.
- * This is an older type of interface for self programming flash. It is
- * commonly use in older AMD chips and is obsolete compared with CFI.
- * It is called JEDEC because the JEDEC association distributes the ID codes
- * for the chips.
- *
- * See the AMD flash databook for information on how to operate the interface.
- *
- * $Id: jedec.h,v 1.4 2005/11/07 11:14:54 gleixner Exp $
- */
-
-#ifndef __LINUX_MTD_JEDEC_H__
-#define __LINUX_MTD_JEDEC_H__
-
-#include <linux/types.h>
-
-#define MAX_JEDEC_CHIPS 16
-
-// Listing of all supported chips and their information
-struct JEDECTable
-{
- __u16 jedec;
- char *name;
- unsigned long size;
- unsigned long sectorsize;
- __u32 capabilities;
-};
-
-// JEDEC being 0 is the end of the chip array
-struct jedec_flash_chip
-{
- __u16 jedec;
- unsigned long size;
- unsigned long sectorsize;
-
- // *(__u8*)(base + (adder << addrshift)) = data << datashift
- // Address size = size << addrshift
- unsigned long base; // Byte 0 of the flash, will be unaligned
- unsigned int datashift; // Useful for 32bit/16bit accesses
- unsigned int addrshift;
- unsigned long offset; // linerized start. base==offset for unbanked, uninterleaved flash
-
- __u32 capabilities;
-
- // These markers are filled in by the flash_chip_scan function
- unsigned long start;
- unsigned long length;
-};
-
-struct jedec_private
-{
- unsigned long size; // Total size of all the devices
-
- /* Bank handling. If sum(bank_fill) == size then this is linear flash.
- Otherwise the mapping has holes in it. bank_fill may be used to
- find the holes, but in the common symetric case
- bank_fill[0] == bank_fill[*], thus addresses may be computed
- mathmatically. bank_fill must be powers of two */
- unsigned is_banked;
- unsigned long bank_fill[MAX_JEDEC_CHIPS];
-
- struct jedec_flash_chip chips[MAX_JEDEC_CHIPS];
-};
-
-#endif
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 0a13bb3..245f909 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -143,10 +143,12 @@
int (*erase) (struct mtd_info *mtd, struct erase_info *instr);
/* This stuff for eXecute-In-Place */
- int (*point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf);
+ /* phys is optional and may be set to NULL */
+ int (*point) (struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, void **virt, resource_size_t *phys);
/* We probably shouldn't allow XIP if the unpoint isn't a NULL */
- void (*unpoint) (struct mtd_info *mtd, u_char * addr, loff_t from, size_t len);
+ void (*unpoint) (struct mtd_info *mtd, loff_t from, size_t len);
int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
diff --git a/include/linux/mtd/pmc551.h b/include/linux/mtd/pmc551.h
index a7f6d20..5cc070c 100644
--- a/include/linux/mtd/pmc551.h
+++ b/include/linux/mtd/pmc551.h
@@ -36,8 +36,9 @@
* Function Prototypes
*/
static int pmc551_erase(struct mtd_info *, struct erase_info *);
-static void pmc551_unpoint(struct mtd_info *, u_char *, loff_t, size_t);
-static int pmc551_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf);
+static void pmc551_unpoint(struct mtd_info *, loff_t, size_t);
+static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, void **virt, resource_size_t *phys);
static int pmc551_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int pmc551_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
diff --git a/include/linux/of_i2c.h b/include/linux/of_i2c.h
index 2e5a967..bd2a870 100644
--- a/include/linux/of_i2c.h
+++ b/include/linux/of_i2c.h
@@ -14,11 +14,7 @@
#include <linux/i2c.h>
-#ifdef CONFIG_OF_I2C
-
void of_register_i2c_devices(struct i2c_adapter *adap,
struct device_node *adap_node);
-#endif /* CONFIG_OF_I2C */
-
#endif /* __LINUX_OF_I2C_H */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 96acd0d..509159b 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -44,6 +44,7 @@
#include <linux/mod_devicetable.h>
#include <linux/types.h>
+#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/list.h>
#include <linux/compiler.h>
@@ -474,7 +475,7 @@
void pci_bus_add_devices(struct pci_bus *bus);
struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus,
struct pci_ops *ops, void *sysdata);
-static inline struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops,
+static inline struct pci_bus * __devinit pci_scan_bus(int bus, struct pci_ops *ops,
void *sysdata)
{
struct pci_bus *root_bus;
@@ -666,7 +667,7 @@
void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *),
void *userdata);
-int pci_cfg_space_size_ext(struct pci_dev *dev, unsigned check_exp_pcix);
+int pci_cfg_space_size_ext(struct pci_dev *dev);
int pci_cfg_space_size(struct pci_dev *dev);
unsigned char pci_bus_max_busnr(struct pci_bus *bus);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index e5a53da..cf6dbd75 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1429,6 +1429,7 @@
#define PCI_DEVICE_ID_NEO_2DB9PRI 0x00C9
#define PCI_DEVICE_ID_NEO_2RJ45 0x00CA
#define PCI_DEVICE_ID_NEO_2RJ45PRI 0x00CB
+#define PCIE_DEVICE_ID_NEO_4_IBM 0x00F4
#define PCI_VENDOR_ID_XIRCOM 0x115d
#define PCI_DEVICE_ID_XIRCOM_RBM56G 0x0101
diff --git a/include/linux/pda_power.h b/include/linux/pda_power.h
index 225beb1..cb7d10f 100644
--- a/include/linux/pda_power.h
+++ b/include/linux/pda_power.h
@@ -16,10 +16,14 @@
#define PDA_POWER_CHARGE_AC (1 << 0)
#define PDA_POWER_CHARGE_USB (1 << 1)
+struct device;
+
struct pda_power_pdata {
+ int (*init)(struct device *dev);
int (*is_ac_online)(void);
int (*is_usb_online)(void);
void (*set_charge)(int flags);
+ void (*exit)(struct device *dev);
char **supplied_to;
size_t num_supplicants;
diff --git a/include/linux/poll.h b/include/linux/poll.h
index 16d813b..ef45382 100644
--- a/include/linux/poll.h
+++ b/include/linux/poll.h
@@ -117,6 +117,8 @@
extern int do_select(int n, fd_set_bits *fds, s64 *timeout);
extern int do_sys_poll(struct pollfd __user * ufds, unsigned int nfds,
s64 *timeout);
+extern int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
+ fd_set __user *exp, s64 *timeout);
#endif /* KERNEL */
diff --git a/include/linux/quota.h b/include/linux/quota.h
index 52e49dc..dcddfb2 100644
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -347,6 +347,9 @@
((type) == USRQUOTA ? (sb_dqopt(sb)->flags & DQUOT_USR_SUSPENDED) : \
(sb_dqopt(sb)->flags & DQUOT_GRP_SUSPENDED))
+#define sb_any_quota_suspended(sb) (sb_has_quota_suspended(sb, USRQUOTA) | \
+ sb_has_quota_suspended(sb, GRPQUOTA))
+
int register_quota_format(struct quota_format_type *fmt);
void unregister_quota_format(struct quota_format_type *fmt);
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 8082d65..d42dbec 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -131,18 +131,6 @@
*/
#define rcu_read_unlock_bh() __rcu_read_unlock_bh()
-/*
- * Prevent the compiler from merging or refetching accesses. The compiler
- * is also forbidden from reordering successive instances of ACCESS_ONCE(),
- * but only when the compiler is aware of some particular ordering. One way
- * to make the compiler aware of ordering is to put the two invocations of
- * ACCESS_ONCE() in different C statements.
- *
- * This macro does absolutely -nothing- to prevent the CPU from reordering,
- * merging, or refetching absolutely anything at any time.
- */
-#define ACCESS_ONCE(x) (*(volatile typeof(x) *)&(x))
-
/**
* rcu_dereference - fetch an RCU-protected pointer in an
* RCU read-side critical section. This pointer may later
diff --git a/include/linux/rio.h b/include/linux/rio.h
index c1c99c9..dc0c755 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -161,6 +161,8 @@
* @ops: configuration space functions
* @id: Port ID, unique among all ports
* @index: Port index, unique among all port interfaces of the same type
+ * @sys_size: RapidIO common transport system size
+ * @phy_type: RapidIO phy type
* @name: Port name string
* @priv: Master port private data
*/
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 03c2380..5395a61 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -158,6 +158,8 @@
}
#endif
+extern unsigned long long time_sync_thresh;
+
/*
* Task state bitmask. NOTE! These bits are also
* encoded in fs/proc/array.c: get_task_state().
@@ -1551,6 +1553,35 @@
extern unsigned long long sched_clock(void);
+#ifndef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
+static inline void sched_clock_init(void)
+{
+}
+
+static inline u64 sched_clock_cpu(int cpu)
+{
+ return sched_clock();
+}
+
+static inline void sched_clock_tick(void)
+{
+}
+
+static inline void sched_clock_idle_sleep_event(void)
+{
+}
+
+static inline void sched_clock_idle_wakeup_event(u64 delta_ns)
+{
+}
+#else
+extern void sched_clock_init(void);
+extern u64 sched_clock_cpu(int cpu);
+extern void sched_clock_tick(void);
+extern void sched_clock_idle_sleep_event(void);
+extern void sched_clock_idle_wakeup_event(u64 delta_ns);
+#endif
+
/*
* For kernel-internal use: high-speed (but slightly incorrect) per-cpu
* clock constructed from sched_clock():
@@ -1977,6 +2008,11 @@
clear_tsk_thread_flag(tsk,TIF_NEED_RESCHED);
}
+static inline int test_tsk_need_resched(struct task_struct *tsk)
+{
+ return unlikely(test_tsk_thread_flag(tsk,TIF_NEED_RESCHED));
+}
+
static inline int signal_pending(struct task_struct *p)
{
return unlikely(test_tsk_thread_flag(p,TIF_SIGPENDING));
@@ -2001,13 +2037,13 @@
* cond_resched_lock() will drop the spinlock before scheduling,
* cond_resched_softirq() will enable bhs before scheduling.
*/
-#ifdef CONFIG_PREEMPT
+extern int _cond_resched(void);
+#ifdef CONFIG_PREEMPT_BKL
static inline int cond_resched(void)
{
return 0;
}
#else
-extern int _cond_resched(void);
static inline int cond_resched(void)
{
return _cond_resched();
@@ -2015,6 +2051,10 @@
#endif
extern int cond_resched_lock(spinlock_t * lock);
extern int cond_resched_softirq(void);
+static inline int cond_resched_bkl(void)
+{
+ return _cond_resched();
+}
/*
* Does a critical section need to be broken due to another
diff --git a/include/linux/string.h b/include/linux/string.h
index c5d3fca..efdc445 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -109,5 +109,7 @@
extern char **argv_split(gfp_t gfp, const char *str, int *argcp);
extern void argv_free(char **argv);
+extern bool sysfs_streq(const char *s1, const char *s2);
+
#endif
#endif /* _LINUX_STRING_H_ */
diff --git a/include/linux/timex.h b/include/linux/timex.h
index 8ea3e71..fc6035d 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -58,6 +58,8 @@
#include <asm/param.h>
+#define NTP_API 4 /* NTP API version */
+
/*
* SHIFT_KG and SHIFT_KF establish the damping of the PLL and are chosen
* for a slightly underdamped convergence characteristic. SHIFT_KH
@@ -74,24 +76,22 @@
#define MAXTC 10 /* maximum time constant (shift) */
/*
- * The SHIFT_UPDATE define establishes the decimal point of the
- * time_offset variable which represents the current offset with
- * respect to standard time.
- *
* SHIFT_USEC defines the scaling (shift) of the time_freq and
* time_tolerance variables, which represent the current frequency
* offset and maximum frequency tolerance.
*/
-#define SHIFT_UPDATE (SHIFT_HZ + 1) /* time offset scale (shift) */
#define SHIFT_USEC 16 /* frequency offset scale (shift) */
-#define SHIFT_NSEC 12 /* kernel frequency offset scale */
+#define PPM_SCALE (NSEC_PER_USEC << (NTP_SCALE_SHIFT - SHIFT_USEC))
+#define PPM_SCALE_INV_SHIFT 20
+#define PPM_SCALE_INV ((1ll << (PPM_SCALE_INV_SHIFT + NTP_SCALE_SHIFT)) / \
+ PPM_SCALE + 1)
-#define MAXPHASE 512000L /* max phase error (us) */
-#define MAXFREQ (512L << SHIFT_USEC) /* max frequency error (ppm) */
-#define MAXFREQ_NSEC (512000L << SHIFT_NSEC) /* max frequency error (ppb) */
+#define MAXPHASE 500000000l /* max phase error (ns) */
+#define MAXFREQ 500000 /* max frequency error (ns/s) */
+#define MAXFREQ_SCALED ((s64)MAXFREQ << NTP_SCALE_SHIFT)
#define MINSEC 256 /* min interval between updates (s) */
#define MAXSEC 2048 /* max interval between updates (s) */
-#define NTP_PHASE_LIMIT (MAXPHASE << 5) /* beyond max. dispersion */
+#define NTP_PHASE_LIMIT ((MAXPHASE / NSEC_PER_USEC) << 5) /* beyond max. dispersion */
/*
* syscall interface - used (mainly by NTP daemon)
@@ -121,9 +121,11 @@
long errcnt; /* calibration errors (ro) */
long stbcnt; /* stability limit exceeded (ro) */
+ int tai; /* TAI offset (ro) */
+
int :32; int :32; int :32; int :32;
int :32; int :32; int :32; int :32;
- int :32; int :32; int :32; int :32;
+ int :32; int :32; int :32;
};
/*
@@ -135,6 +137,9 @@
#define ADJ_ESTERROR 0x0008 /* estimated time error */
#define ADJ_STATUS 0x0010 /* clock status */
#define ADJ_TIMECONST 0x0020 /* pll time constant */
+#define ADJ_TAI 0x0080 /* set TAI offset */
+#define ADJ_MICRO 0x1000 /* select microsecond resolution */
+#define ADJ_NANO 0x2000 /* select nanosecond resolution */
#define ADJ_TICK 0x4000 /* tick value */
#define ADJ_OFFSET_SINGLESHOT 0x8001 /* old-fashioned adjtime */
#define ADJ_OFFSET_SS_READ 0xa001 /* read-only adjtime */
@@ -146,8 +151,6 @@
#define MOD_ESTERROR ADJ_ESTERROR
#define MOD_STATUS ADJ_STATUS
#define MOD_TIMECONST ADJ_TIMECONST
-#define MOD_CLKB ADJ_TICK
-#define MOD_CLKA ADJ_OFFSET_SINGLESHOT /* 0x8000 in original */
/*
@@ -169,9 +172,13 @@
#define STA_PPSERROR 0x0800 /* PPS signal calibration error (ro) */
#define STA_CLOCKERR 0x1000 /* clock hardware fault (ro) */
+#define STA_NANO 0x2000 /* resolution (0 = us, 1 = ns) (ro) */
+#define STA_MODE 0x4000 /* mode (0 = PLL, 1 = FLL) (ro) */
+#define STA_CLK 0x8000 /* clock source (0 = A, 1 = B) (ro) */
+/* read-only bits */
#define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \
- STA_PPSERROR | STA_CLOCKERR) /* read-only bits */
+ STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK)
/*
* Clock states (time_state)
@@ -203,10 +210,9 @@
extern long time_maxerror; /* maximum error */
extern long time_esterror; /* estimated error */
-extern long time_freq; /* frequency offset (scaled ppm) */
-
extern long time_adjust; /* The amount of adjtime left */
+extern void ntp_init(void);
extern void ntp_clear(void);
/**
@@ -225,7 +231,7 @@
__x < 0 ? -(-__x >> __s) : __x >> __s; \
})
-#define TICK_LENGTH_SHIFT 32
+#define NTP_SCALE_SHIFT 32
#ifdef CONFIG_NO_HZ
#define NTP_INTERVAL_FREQ (2)
@@ -234,8 +240,8 @@
#endif
#define NTP_INTERVAL_LENGTH (NSEC_PER_SEC/NTP_INTERVAL_FREQ)
-/* Returns how long ticks are at present, in ns / 2^(SHIFT_SCALE-10). */
-extern u64 current_tick_length(void);
+/* Returns how long ticks are at present, in ns / 2^NTP_SCALE_SHIFT. */
+extern u64 tick_length;
extern void second_overflow(void);
extern void update_ntp_one_tick(void);
diff --git a/include/linux/usb/c67x00.h b/include/linux/usb/c67x00.h
new file mode 100644
index 0000000..83c6b45
--- /dev/null
+++ b/include/linux/usb/c67x00.h
@@ -0,0 +1,48 @@
+/*
+ * usb_c67x00.h: platform definitions for the Cypress C67X00 USB chip
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA.
+ */
+
+#ifndef _LINUX_USB_C67X00_H
+#define _LINUX_USB_C67X00_H
+
+/* SIE configuration */
+#define C67X00_SIE_UNUSED 0
+#define C67X00_SIE_HOST 1
+#define C67X00_SIE_PERIPHERAL_A 2 /* peripheral on A port */
+#define C67X00_SIE_PERIPHERAL_B 3 /* peripheral on B port */
+
+#define c67x00_sie_config(config, n) (((config)>>(4*(n)))&0x3)
+
+#define C67X00_SIE1_UNUSED (C67X00_SIE_UNUSED << 0)
+#define C67X00_SIE1_HOST (C67X00_SIE_HOST << 0)
+#define C67X00_SIE1_PERIPHERAL_A (C67X00_SIE_PERIPHERAL_A << 0)
+#define C67X00_SIE1_PERIPHERAL_B (C67X00_SIE_PERIPHERAL_B << 0)
+
+#define C67X00_SIE2_UNUSED (C67X00_SIE_UNUSED << 4)
+#define C67X00_SIE2_HOST (C67X00_SIE_HOST << 4)
+#define C67X00_SIE2_PERIPHERAL_A (C67X00_SIE_PERIPHERAL_A << 4)
+#define C67X00_SIE2_PERIPHERAL_B (C67X00_SIE_PERIPHERAL_B << 4)
+
+struct c67x00_platform_data {
+ int sie_config; /* SIEs config (C67X00_SIEx_*) */
+ unsigned long hpi_regstep; /* Step between HPI registers */
+};
+
+#endif /* _LINUX_USB_C67X00_H */
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 7e0d308..73a2f4e 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -455,7 +455,7 @@
/*-------------------------------------------------------------------------*/
-/* USB_DT_BOS: group of wireless capabilities */
+/* USB_DT_BOS: group of device-level capabilities */
struct usb_bos_descriptor {
__u8 bLength;
__u8 bDescriptorType;
@@ -501,6 +501,16 @@
__u8 bReserved;
} __attribute__((packed));
+#define USB_CAP_TYPE_EXT 2
+
+struct usb_ext_cap_descriptor { /* Link Power Management */
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ __u8 bmAttributes;
+#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */
+} __attribute__((packed));
+
/*-------------------------------------------------------------------------*/
/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index d8128f7..cf468fb 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -114,6 +114,8 @@
int (*dequeue) (struct usb_ep *ep, struct usb_request *req);
int (*set_halt) (struct usb_ep *ep, int value);
+ int (*set_wedge) (struct usb_ep *ep);
+
int (*fifo_status) (struct usb_ep *ep);
void (*fifo_flush) (struct usb_ep *ep);
};
@@ -349,6 +351,25 @@
}
/**
+ * usb_ep_set_wedge - sets the halt feature and ignores clear requests
+ * @ep: the endpoint being wedged
+ *
+ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT)
+ * requests. If the gadget driver clears the halt status, it will
+ * automatically unwedge the endpoint.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int
+usb_ep_set_wedge(struct usb_ep *ep)
+{
+ if (ep->ops->set_wedge)
+ return ep->ops->set_wedge(ep);
+ else
+ return ep->ops->set_halt(ep, 1);
+}
+
+/**
* usb_ep_fifo_status - returns number of bytes in fifo, or error
* @ep: the endpoint whose fifo status is being checked.
*
diff --git a/include/linux/vermagic.h b/include/linux/vermagic.h
index 4d0909e..79b9837 100644
--- a/include/linux/vermagic.h
+++ b/include/linux/vermagic.h
@@ -17,6 +17,11 @@
#else
#define MODULE_VERMAGIC_MODULE_UNLOAD ""
#endif
+#ifdef CONFIG_MODVERSIONS
+#define MODULE_VERMAGIC_MODVERSIONS "modversions "
+#else
+#define MODULE_VERMAGIC_MODVERSIONS ""
+#endif
#ifndef MODULE_ARCH_VERMAGIC
#define MODULE_ARCH_VERMAGIC ""
#endif
@@ -24,5 +29,6 @@
#define VERMAGIC_STRING \
UTS_RELEASE " " \
MODULE_VERMAGIC_SMP MODULE_VERMAGIC_PREEMPT \
- MODULE_VERMAGIC_MODULE_UNLOAD MODULE_ARCH_VERMAGIC
+ MODULE_VERMAGIC_MODULE_UNLOAD MODULE_VERMAGIC_MODVERSIONS \
+ MODULE_ARCH_VERMAGIC
diff --git a/include/linux/virtio.h b/include/linux/virtio.h
index e7d1084..06005fa 100644
--- a/include/linux/virtio.h
+++ b/include/linux/virtio.h
@@ -76,6 +76,7 @@
* @dev: underlying device.
* @id: the device type identification (used to match it with a driver).
* @config: the configuration ops for this device.
+ * @features: the features supported by both driver and device.
* @priv: private pointer for the driver's use.
*/
struct virtio_device
@@ -84,6 +85,8 @@
struct device dev;
struct virtio_device_id id;
struct virtio_config_ops *config;
+ /* Note that this is a Linux set_bit-style bitmap. */
+ unsigned long features[1];
void *priv;
};
@@ -94,6 +97,8 @@
* virtio_driver - operations for a virtio I/O driver
* @driver: underlying device driver (populate name and owner).
* @id_table: the ids serviced by this driver.
+ * @feature_table: an array of feature numbers supported by this device.
+ * @feature_table_size: number of entries in the feature table array.
* @probe: the function to call when a device is found. Returns a token for
* remove, or PTR_ERR().
* @remove: the function when a device is removed.
@@ -103,6 +108,8 @@
struct virtio_driver {
struct device_driver driver;
const struct virtio_device_id *id_table;
+ const unsigned int *feature_table;
+ unsigned int feature_table_size;
int (*probe)(struct virtio_device *dev);
void (*remove)(struct virtio_device *dev);
void (*config_changed)(struct virtio_device *dev);
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index bca0b10..d4695a3 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -9,6 +9,7 @@
#define VIRTIO_BLK_F_BARRIER 0 /* Does host support barriers? */
#define VIRTIO_BLK_F_SIZE_MAX 1 /* Indicates maximum segment size */
#define VIRTIO_BLK_F_SEG_MAX 2 /* Indicates maximum # of segments */
+#define VIRTIO_BLK_F_GEOMETRY 4 /* Legacy geometry available */
struct virtio_blk_config
{
@@ -18,6 +19,12 @@
__le32 size_max;
/* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */
__le32 seg_max;
+ /* geometry the device (if VIRTIO_BLK_F_GEOMETRY) */
+ struct virtio_blk_geometry {
+ __le16 cylinders;
+ __u8 heads;
+ __u8 sectors;
+ } geometry;
} __attribute__((packed));
/* These two define direction. */
@@ -41,13 +48,8 @@
__u64 sector;
};
+/* And this is the final byte of the write scatter-gather list. */
#define VIRTIO_BLK_S_OK 0
#define VIRTIO_BLK_S_IOERR 1
#define VIRTIO_BLK_S_UNSUPP 2
-
-/* This is the first element of the write scatter-gather list */
-struct virtio_blk_inhdr
-{
- unsigned char status;
-};
#endif /* _LINUX_VIRTIO_BLK_H */
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index d581b29..50db245 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -16,27 +16,20 @@
#define VIRTIO_CONFIG_S_FAILED 0x80
#ifdef __KERNEL__
-struct virtio_device;
+#include <linux/virtio.h>
/**
* virtio_config_ops - operations for configuring a virtio device
- * @feature: search for a feature in this config
- * vdev: the virtio_device
- * bit: the feature bit
- * Returns true if the feature is supported. Acknowledges the feature
- * so the host can see it.
* @get: read the value of a configuration field
* vdev: the virtio_device
* offset: the offset of the configuration field
* buf: the buffer to write the field value into.
* len: the length of the buffer
- * Note that contents are conventionally little-endian.
* @set: write the value of a configuration field
* vdev: the virtio_device
* offset: the offset of the configuration field
* buf: the buffer to read the field value from.
* len: the length of the buffer
- * Note that contents are conventionally little-endian.
* @get_status: read the status byte
* vdev: the virtio_device
* Returns the status byte
@@ -52,10 +45,15 @@
* callback: the virqtueue callback
* Returns the new virtqueue or ERR_PTR() (eg. -ENOENT).
* @del_vq: free a virtqueue found by find_vq().
+ * @get_features: get the array of feature bits for this device.
+ * vdev: the virtio_device
+ * Returns the first 32 feature bits (all we currently need).
+ * @set_features: confirm what device features we'll be using.
+ * vdev: the virtio_device
+ * feature: the first 32 feature bits
*/
struct virtio_config_ops
{
- bool (*feature)(struct virtio_device *vdev, unsigned bit);
void (*get)(struct virtio_device *vdev, unsigned offset,
void *buf, unsigned len);
void (*set)(struct virtio_device *vdev, unsigned offset,
@@ -67,43 +65,52 @@
unsigned index,
void (*callback)(struct virtqueue *));
void (*del_vq)(struct virtqueue *vq);
+ u32 (*get_features)(struct virtio_device *vdev);
+ void (*set_features)(struct virtio_device *vdev, u32 features);
};
+/* If driver didn't advertise the feature, it will never appear. */
+void virtio_check_driver_offered_feature(const struct virtio_device *vdev,
+ unsigned int fbit);
+
/**
- * virtio_config_val - look for a feature and get a single virtio config.
+ * virtio_has_feature - helper to determine if this device has this feature.
+ * @vdev: the device
+ * @fbit: the feature bit
+ */
+static inline bool virtio_has_feature(const struct virtio_device *vdev,
+ unsigned int fbit)
+{
+ /* Did you forget to fix assumptions on max features? */
+ if (__builtin_constant_p(fbit))
+ BUILD_BUG_ON(fbit >= 32);
+
+ virtio_check_driver_offered_feature(vdev, fbit);
+ return test_bit(fbit, vdev->features);
+}
+
+/**
+ * virtio_config_val - look for a feature and get a virtio config entry.
* @vdev: the virtio device
* @fbit: the feature bit
* @offset: the type to search for.
* @val: a pointer to the value to fill in.
*
* The return value is -ENOENT if the feature doesn't exist. Otherwise
- * the value is endian-corrected and returned in v. */
-#define virtio_config_val(vdev, fbit, offset, v) ({ \
- int _err; \
- if ((vdev)->config->feature((vdev), (fbit))) { \
- __virtio_config_val((vdev), (offset), (v)); \
- _err = 0; \
- } else \
- _err = -ENOENT; \
- _err; \
-})
+ * the config value is copied into whatever is pointed to by v. */
+#define virtio_config_val(vdev, fbit, offset, v) \
+ virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(v))
-/**
- * __virtio_config_val - get a single virtio config without feature check.
- * @vdev: the virtio device
- * @offset: the type to search for.
- * @val: a pointer to the value to fill in.
- *
- * The value is endian-corrected and returned in v. */
-#define __virtio_config_val(vdev, offset, v) do { \
- BUILD_BUG_ON(sizeof(*(v)) != 1 && sizeof(*(v)) != 2 \
- && sizeof(*(v)) != 4 && sizeof(*(v)) != 8); \
- (vdev)->config->get((vdev), (offset), (v), sizeof(*(v))); \
- switch (sizeof(*(v))) { \
- case 2: le16_to_cpus((__u16 *) v); break; \
- case 4: le32_to_cpus((__u32 *) v); break; \
- case 8: le64_to_cpus((__u64 *) v); break; \
- } \
-} while(0)
+static inline int virtio_config_buf(struct virtio_device *vdev,
+ unsigned int fbit,
+ unsigned int offset,
+ void *buf, unsigned len)
+{
+ if (!virtio_has_feature(vdev, fbit))
+ return -ENOENT;
+
+ vdev->config->get(vdev, offset, buf, len);
+ return 0;
+}
#endif /* __KERNEL__ */
#endif /* _LINUX_VIRTIO_CONFIG_H */
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index 1ea3351..9405aa6c 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -6,9 +6,18 @@
#define VIRTIO_ID_NET 1
/* The feature bitmap for virtio net */
-#define VIRTIO_NET_F_CSUM 0 /* Can handle pkts w/ partial csum */
+#define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */
+#define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */
#define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */
-#define VIRTIO_NET_F_GSO 6 /* Can handle pkts w/ any GSO type */
+#define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */
+#define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */
+#define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */
+#define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */
+#define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */
+#define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */
+#define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */
+#define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */
+#define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */
struct virtio_net_config
{
diff --git a/include/media/v4l2-i2c-drv-legacy.h b/include/media/v4l2-i2c-drv-legacy.h
index 347b6f8..8785622 100644
--- a/include/media/v4l2-i2c-drv-legacy.h
+++ b/include/media/v4l2-i2c-drv-legacy.h
@@ -31,6 +31,7 @@
int (*resume)(struct i2c_client *client);
int (*legacy_probe)(struct i2c_adapter *adapter);
int legacy_class;
+ const struct i2c_device_id *id_table;
};
static struct v4l2_i2c_driver_data v4l2_i2c_data;
@@ -124,6 +125,7 @@
v4l2_i2c_driver.command = v4l2_i2c_data.command;
v4l2_i2c_driver.probe = v4l2_i2c_data.probe;
v4l2_i2c_driver.remove = v4l2_i2c_data.remove;
+ v4l2_i2c_driver.id_table = v4l2_i2c_data.id_table;
err = i2c_add_driver(&v4l2_i2c_driver);
if (err)
i2c_del_driver(&v4l2_i2c_driver_legacy);
diff --git a/include/media/v4l2-i2c-drv.h b/include/media/v4l2-i2c-drv.h
index 7b6f06b..40ecef2 100644
--- a/include/media/v4l2-i2c-drv.h
+++ b/include/media/v4l2-i2c-drv.h
@@ -36,6 +36,7 @@
int (*resume)(struct i2c_client *client);
int (*legacy_probe)(struct i2c_adapter *adapter);
int legacy_class;
+ const struct i2c_device_id *id_table;
};
static struct v4l2_i2c_driver_data v4l2_i2c_data;
@@ -53,6 +54,7 @@
v4l2_i2c_driver.remove = v4l2_i2c_data.remove;
v4l2_i2c_driver.suspend = v4l2_i2c_data.suspend;
v4l2_i2c_driver.resume = v4l2_i2c_data.resume;
+ v4l2_i2c_driver.id_table = v4l2_i2c_data.id_table;
return i2c_add_driver(&v4l2_i2c_driver);
}
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index 1f74bcd..32742c4 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -30,13 +30,6 @@
#endif
/*
- * SCSI command lengths
- */
-
-extern const unsigned char scsi_command_size[8];
-#define COMMAND_SIZE(opcode) scsi_command_size[((opcode) >> 5) & 7]
-
-/*
* Special value for scanning to specify scanning or rescanning of all
* possible channels, (target) ids, or luns on a given shost.
*/
@@ -109,6 +102,7 @@
#define MODE_SENSE_10 0x5a
#define PERSISTENT_RESERVE_IN 0x5e
#define PERSISTENT_RESERVE_OUT 0x5f
+#define VARIABLE_LENGTH_CMD 0x7f
#define REPORT_LUNS 0xa0
#define MAINTENANCE_IN 0xa3
#define MOVE_MEDIUM 0xa5
@@ -136,6 +130,38 @@
#define ATA_12 0xa1 /* 12-byte pass-thru */
/*
+ * SCSI command lengths
+ */
+
+#define SCSI_MAX_VARLEN_CDB_SIZE 260
+
+/* defined in T10 SCSI Primary Commands-2 (SPC2) */
+struct scsi_varlen_cdb_hdr {
+ u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */
+ u8 control;
+ u8 misc[5];
+ u8 additional_cdb_length; /* total cdb length - 8 */
+ __be16 service_action;
+ /* service specific data follows */
+};
+
+static inline unsigned
+scsi_varlen_cdb_length(const void *hdr)
+{
+ return ((struct scsi_varlen_cdb_hdr *)hdr)->additional_cdb_length + 8;
+}
+
+extern const unsigned char scsi_command_size_tbl[8];
+#define COMMAND_SIZE(opcode) scsi_command_size_tbl[((opcode) >> 5) & 7]
+
+static inline unsigned
+scsi_command_size(const unsigned char *cmnd)
+{
+ return (cmnd[0] == VARIABLE_LENGTH_CMD) ?
+ scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]);
+}
+
+/*
* SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
* T10/1561-D Revision 4 Draft dated 7th November 2002.
*/
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index 8d20e60..3e46dfa 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -7,10 +7,28 @@
#include <linux/types.h>
#include <linux/timer.h>
#include <linux/scatterlist.h>
+#include <linux/blkdev.h>
struct Scsi_Host;
struct scsi_device;
+/*
+ * MAX_COMMAND_SIZE is:
+ * The longest fixed-length SCSI CDB as per the SCSI standard.
+ * fixed-length means: commands that their size can be determined
+ * by their opcode and the CDB does not carry a length specifier, (unlike
+ * the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly
+ * true and the SCSI standard also defines extended commands and
+ * vendor specific commands that can be bigger than 16 bytes. The kernel
+ * will support these using the same infrastructure used for VARLEN CDB's.
+ * So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml
+ * supports without specifying a cmd_len by ULD's
+ */
+#define MAX_COMMAND_SIZE 16
+#if (MAX_COMMAND_SIZE > BLK_MAX_CDB)
+# error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB
+#endif
+
struct scsi_data_buffer {
struct sg_table table;
unsigned length;
@@ -60,12 +78,11 @@
int allowed;
int timeout_per_command;
- unsigned char cmd_len;
+ unsigned short cmd_len;
enum dma_data_direction sc_data_direction;
/* These elements define the operation we are about to perform */
-#define MAX_COMMAND_SIZE 16
- unsigned char cmnd[MAX_COMMAND_SIZE];
+ unsigned char *cmnd;
struct timer_list eh_timeout; /* Used to time out the command. */
diff --git a/include/scsi/scsi_eh.h b/include/scsi/scsi_eh.h
index d3a133b..2a9add2 100644
--- a/include/scsi/scsi_eh.h
+++ b/include/scsi/scsi_eh.h
@@ -75,11 +75,11 @@
int result;
enum dma_data_direction data_direction;
unsigned char cmd_len;
- unsigned char cmnd[MAX_COMMAND_SIZE];
+ unsigned char *cmnd;
struct scsi_data_buffer sdb;
struct request *next_rq;
-
/* new command support */
+ unsigned char eh_cmnd[BLK_MAX_CDB];
struct scatterlist sense_sgl;
};
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index d967d6d..1834fdf 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -573,13 +573,11 @@
/*
* The maximum length of SCSI commands that this host can accept.
* Probably 12 for most host adapters, but could be 16 for others.
+ * or 260 if the driver supports variable length cdbs.
* For drivers that don't set this field, a value of 12 is
- * assumed. I am leaving this as a number rather than a bit
- * because you never know what subsequent SCSI standards might do
- * (i.e. could there be a 20 byte or a 24-byte command a few years
- * down the road?).
+ * assumed.
*/
- unsigned char max_cmd_len;
+ unsigned short max_cmd_len;
int this_id;
int can_queue;
diff --git a/include/sound/soc.h b/include/sound/soc.h
index e6ea6f7..d3c8c03 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -238,7 +238,7 @@
struct snd_ctl_elem_info *uinfo);
int snd_soc_info_volsw_ext(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo);
-#define snd_soc_info_bool_ext snd_ctl_boolean_mono
+#define snd_soc_info_bool_ext snd_ctl_boolean_mono_info
int snd_soc_get_volsw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_put_volsw(struct snd_kcontrol *kcontrol,
diff --git a/init/Kconfig b/init/Kconfig
index 3e7b257..6135d07f 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -316,9 +316,16 @@
Say N if unsure.
+#
+# Architectures with an unreliable sched_clock() should select this:
+#
+config HAVE_UNSTABLE_SCHED_CLOCK
+ bool
+
config GROUP_SCHED
bool "Group CPU scheduler"
- default y
+ depends on EXPERIMENTAL
+ default n
help
This feature lets CPU scheduler recognize task groups and control CPU
bandwidth allocation to such task groups.
@@ -326,7 +333,7 @@
config FAIR_GROUP_SCHED
bool "Group scheduling for SCHED_OTHER"
depends on GROUP_SCHED
- default y
+ default GROUP_SCHED
config RT_GROUP_SCHED
bool "Group scheduling for SCHED_RR/FIFO"
@@ -627,6 +634,14 @@
help
Enable support for generating core dumps. Disabling saves about 4k.
+config PCSPKR_PLATFORM
+ bool "Enable PC-Speaker support" if EMBEDDED
+ depends on ALPHA || X86 || MIPS || PPC_PREP || PPC_CHRP || PPC_PSERIES
+ default y
+ help
+ This option allows to disable the internal PC-Speaker
+ support, saving some memory.
+
config COMPAT_BRK
bool "Disable heap randomization"
default y
@@ -720,7 +735,7 @@
config SLUB_DEBUG
default y
bool "Enable SLUB debugging support" if EMBEDDED
- depends on SLUB
+ depends on SLUB && SYSFS
help
SLUB has extensive debug support features. Disabling these can
result in significant savings in code size. This also disables
@@ -825,6 +840,15 @@
If unsure, say Y.
+config MODULE_FORCE_LOAD
+ bool "Forced module loading"
+ depends on MODULES
+ default n
+ help
+ Allow loading of modules without version information (ie. modprobe
+ --force). Forced module loading sets the 'F' (forced) taint flag and
+ is usually a really bad idea.
+
config MODULE_UNLOAD
bool "Module unloading"
depends on MODULES
diff --git a/init/main.c b/init/main.c
index a87d4ca5..f406fef 100644
--- a/init/main.c
+++ b/init/main.c
@@ -602,6 +602,7 @@
softirq_init();
timekeeping_init();
time_init();
+ sched_clock_init();
profile_init();
if (!irqs_disabled())
printk("start_kernel(): bug: interrupts were enabled early\n");
@@ -701,7 +702,6 @@
for (call = __initcall_start; call < __initcall_end; call++) {
ktime_t t0, t1, delta;
- char *msg = NULL;
char msgbuf[40];
int result;
@@ -723,22 +723,23 @@
(unsigned long long) delta.tv64 >> 20);
}
- if (result && result != -ENODEV && initcall_debug) {
- sprintf(msgbuf, "error code %d", result);
- msg = msgbuf;
- }
+ msgbuf[0] = 0;
+
+ if (result && result != -ENODEV && initcall_debug)
+ sprintf(msgbuf, "error code %d ", result);
+
if (preempt_count() != count) {
- msg = "preemption imbalance";
+ strncat(msgbuf, "preemption imbalance ", sizeof(msgbuf));
preempt_count() = count;
}
if (irqs_disabled()) {
- msg = "disabled interrupts";
+ strncat(msgbuf, "disabled interrupts ", sizeof(msgbuf));
local_irq_enable();
}
- if (msg) {
+ if (msgbuf[0]) {
print_fn_descriptor_symbol(KERN_WARNING "initcall %s()",
(unsigned long) *call);
- printk(" returned with %s\n", msg);
+ printk(" returned with %s\n", msgbuf);
}
}
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 94fd3b0..b3b69fd 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -673,7 +673,7 @@
if (IS_ERR(name = getname(u_name)))
return PTR_ERR(name);
- fd = get_unused_fd();
+ fd = get_unused_fd_flags(O_CLOEXEC);
if (fd < 0)
goto out_putname;
@@ -709,7 +709,6 @@
goto out_putfd;
}
- set_close_on_exec(fd, 1);
fd_install(fd, filp);
goto out_upsem;
diff --git a/kernel/Makefile b/kernel/Makefile
index 188c432..1c9938ad 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -9,7 +9,7 @@
rcupdate.o extable.o params.o posix-timers.o \
kthread.o wait.o kfifo.o sys_ni.o posix-cpu-timers.o mutex.o \
hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \
- notifier.o ksysfs.o pm_qos_params.o
+ notifier.o ksysfs.o pm_qos_params.o sched_clock.o
obj-$(CONFIG_SYSCTL_SYSCALL_CHECK) += sysctl_check.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
diff --git a/kernel/compat.c b/kernel/compat.c
index 4a856a3..32c254a 100644
--- a/kernel/compat.c
+++ b/kernel/compat.c
@@ -955,7 +955,8 @@
__put_user(txc.jitcnt, &utp->jitcnt) ||
__put_user(txc.calcnt, &utp->calcnt) ||
__put_user(txc.errcnt, &utp->errcnt) ||
- __put_user(txc.stbcnt, &utp->stbcnt))
+ __put_user(txc.stbcnt, &utp->stbcnt) ||
+ __put_user(txc.tai, &utp->tai))
ret = -EFAULT;
return ret;
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 8da627d..86ea9e34 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -1031,11 +1031,9 @@
return task_cs(current) == cpuset_being_rebound;
}
-static int update_relax_domain_level(struct cpuset *cs, char *buf)
+static int update_relax_domain_level(struct cpuset *cs, s64 val)
{
- int val = simple_strtol(buf, NULL, 10);
-
- if (val < 0)
+ if ((int)val < 0)
val = -1;
if (val != cs->relax_domain_level) {
@@ -1280,9 +1278,6 @@
case FILE_MEMLIST:
retval = update_nodemask(cs, buffer);
break;
- case FILE_SCHED_RELAX_DOMAIN_LEVEL:
- retval = update_relax_domain_level(cs, buffer);
- break;
default:
retval = -EINVAL;
goto out2;
@@ -1348,6 +1343,30 @@
return retval;
}
+static int cpuset_write_s64(struct cgroup *cgrp, struct cftype *cft, s64 val)
+{
+ int retval = 0;
+ struct cpuset *cs = cgroup_cs(cgrp);
+ cpuset_filetype_t type = cft->private;
+
+ cgroup_lock();
+
+ if (cgroup_is_removed(cgrp)) {
+ cgroup_unlock();
+ return -ENODEV;
+ }
+ switch (type) {
+ case FILE_SCHED_RELAX_DOMAIN_LEVEL:
+ retval = update_relax_domain_level(cs, val);
+ break;
+ default:
+ retval = -EINVAL;
+ break;
+ }
+ cgroup_unlock();
+ return retval;
+}
+
/*
* These ascii lists should be read in a single call, by using a user
* buffer large enough to hold the entire map. If read in smaller
@@ -1406,9 +1425,6 @@
case FILE_MEMLIST:
s += cpuset_sprintf_memlist(s, cs);
break;
- case FILE_SCHED_RELAX_DOMAIN_LEVEL:
- s += sprintf(s, "%d", cs->relax_domain_level);
- break;
default:
retval = -EINVAL;
goto out;
@@ -1449,6 +1465,18 @@
}
}
+static s64 cpuset_read_s64(struct cgroup *cont, struct cftype *cft)
+{
+ struct cpuset *cs = cgroup_cs(cont);
+ cpuset_filetype_t type = cft->private;
+ switch (type) {
+ case FILE_SCHED_RELAX_DOMAIN_LEVEL:
+ return cs->relax_domain_level;
+ default:
+ BUG();
+ }
+}
+
/*
* for the common functions, 'private' gives the type of file
@@ -1499,8 +1527,8 @@
{
.name = "sched_relax_domain_level",
- .read_u64 = cpuset_read_u64,
- .write_u64 = cpuset_write_u64,
+ .read_s64 = cpuset_read_s64,
+ .write_s64 = cpuset_write_s64,
.private = FILE_SCHED_RELAX_DOMAIN_LEVEL,
},
diff --git a/kernel/exit.c b/kernel/exit.c
index d3ad546..1510f78 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -19,6 +19,7 @@
#include <linux/acct.h>
#include <linux/tsacct_kern.h>
#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/binfmts.h>
#include <linux/nsproxy.h>
#include <linux/pid_namespace.h>
diff --git a/kernel/fork.c b/kernel/fork.c
index 2bb675a..933e60e 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -22,6 +22,7 @@
#include <linux/mempolicy.h>
#include <linux/sem.h>
#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/key.h>
#include <linux/binfmts.h>
#include <linux/mman.h>
diff --git a/kernel/futex.c b/kernel/futex.c
index 98092c9..449def8 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -104,10 +104,6 @@
/* Key which the futex is hashed on: */
union futex_key key;
- /* For fd, sigio sent using these: */
- int fd;
- struct file *filp;
-
/* Optional priority inheritance state: */
struct futex_pi_state *pi_state;
struct task_struct *task;
@@ -126,9 +122,6 @@
static struct futex_hash_bucket futex_queues[1<<FUTEX_HASHBITS];
-/* Futex-fs vfsmount entry: */
-static struct vfsmount *futex_mnt;
-
/*
* Take mm->mmap_sem, when futex is shared
*/
@@ -610,8 +603,6 @@
static void wake_futex(struct futex_q *q)
{
plist_del(&q->list, &q->list.plist);
- if (q->filp)
- send_sigio(&q->filp->f_owner, q->fd, POLL_IN);
/*
* The lock in wake_up_all() is a crucial memory barrier after the
* plist_del() and also before assigning to q->lock_ptr.
@@ -988,14 +979,10 @@
}
/* The key must be already stored in q->key. */
-static inline struct futex_hash_bucket *
-queue_lock(struct futex_q *q, int fd, struct file *filp)
+static inline struct futex_hash_bucket *queue_lock(struct futex_q *q)
{
struct futex_hash_bucket *hb;
- q->fd = fd;
- q->filp = filp;
-
init_waitqueue_head(&q->waiters);
get_futex_key_refs(&q->key);
@@ -1006,7 +993,7 @@
return hb;
}
-static inline void __queue_me(struct futex_q *q, struct futex_hash_bucket *hb)
+static inline void queue_me(struct futex_q *q, struct futex_hash_bucket *hb)
{
int prio;
@@ -1041,15 +1028,6 @@
* exactly once. They are called with the hashed spinlock held.
*/
-/* The key must be already stored in q->key. */
-static void queue_me(struct futex_q *q, int fd, struct file *filp)
-{
- struct futex_hash_bucket *hb;
-
- hb = queue_lock(q, fd, filp);
- __queue_me(q, hb);
-}
-
/* Return 1 if we were still queued (ie. 0 means we were woken) */
static int unqueue_me(struct futex_q *q)
{
@@ -1194,7 +1172,7 @@
if (unlikely(ret != 0))
goto out_release_sem;
- hb = queue_lock(&q, -1, NULL);
+ hb = queue_lock(&q);
/*
* Access the page AFTER the futex is queued.
@@ -1238,7 +1216,7 @@
goto out_unlock_release_sem;
/* Only actually queue if *uaddr contained val. */
- __queue_me(&q, hb);
+ queue_me(&q, hb);
/*
* Now the futex is queued and we have checked the data, we
@@ -1386,7 +1364,7 @@
goto out_release_sem;
retry_unlocked:
- hb = queue_lock(&q, -1, NULL);
+ hb = queue_lock(&q);
retry_locked:
ret = lock_taken = 0;
@@ -1499,7 +1477,7 @@
/*
* Only actually queue now that the atomic ops are done:
*/
- __queue_me(&q, hb);
+ queue_me(&q, hb);
/*
* Now the futex is queued and we have checked the data, we
@@ -1746,121 +1724,6 @@
return ret;
}
-static int futex_close(struct inode *inode, struct file *filp)
-{
- struct futex_q *q = filp->private_data;
-
- unqueue_me(q);
- kfree(q);
-
- return 0;
-}
-
-/* This is one-shot: once it's gone off you need a new fd */
-static unsigned int futex_poll(struct file *filp,
- struct poll_table_struct *wait)
-{
- struct futex_q *q = filp->private_data;
- int ret = 0;
-
- poll_wait(filp, &q->waiters, wait);
-
- /*
- * plist_node_empty() is safe here without any lock.
- * q->lock_ptr != 0 is not safe, because of ordering against wakeup.
- */
- if (plist_node_empty(&q->list))
- ret = POLLIN | POLLRDNORM;
-
- return ret;
-}
-
-static const struct file_operations futex_fops = {
- .release = futex_close,
- .poll = futex_poll,
-};
-
-/*
- * Signal allows caller to avoid the race which would occur if they
- * set the sigio stuff up afterwards.
- */
-static int futex_fd(u32 __user *uaddr, int signal)
-{
- struct futex_q *q;
- struct file *filp;
- int ret, err;
- struct rw_semaphore *fshared;
- static unsigned long printk_interval;
-
- if (printk_timed_ratelimit(&printk_interval, 60 * 60 * 1000)) {
- printk(KERN_WARNING "Process `%s' used FUTEX_FD, which "
- "will be removed from the kernel in June 2007\n",
- current->comm);
- }
-
- ret = -EINVAL;
- if (!valid_signal(signal))
- goto out;
-
- ret = get_unused_fd();
- if (ret < 0)
- goto out;
- filp = get_empty_filp();
- if (!filp) {
- put_unused_fd(ret);
- ret = -ENFILE;
- goto out;
- }
- filp->f_op = &futex_fops;
- filp->f_path.mnt = mntget(futex_mnt);
- filp->f_path.dentry = dget(futex_mnt->mnt_root);
- filp->f_mapping = filp->f_path.dentry->d_inode->i_mapping;
-
- if (signal) {
- err = __f_setown(filp, task_pid(current), PIDTYPE_PID, 1);
- if (err < 0) {
- goto error;
- }
- filp->f_owner.signum = signal;
- }
-
- q = kmalloc(sizeof(*q), GFP_KERNEL);
- if (!q) {
- err = -ENOMEM;
- goto error;
- }
- q->pi_state = NULL;
-
- fshared = ¤t->mm->mmap_sem;
- down_read(fshared);
- err = get_futex_key(uaddr, fshared, &q->key);
-
- if (unlikely(err != 0)) {
- up_read(fshared);
- kfree(q);
- goto error;
- }
-
- /*
- * queue_me() must be called before releasing mmap_sem, because
- * key->shared.inode needs to be referenced while holding it.
- */
- filp->private_data = q;
-
- queue_me(q, ret, filp);
- up_read(fshared);
-
- /* Now we map fd to filp, so userspace can access it */
- fd_install(ret, filp);
-out:
- return ret;
-error:
- put_unused_fd(ret);
- put_filp(filp);
- ret = err;
- goto out;
-}
-
/*
* Support for robust futexes: the kernel cleans up held futexes at
* thread exit time.
@@ -2092,10 +1955,6 @@
case FUTEX_WAKE_BITSET:
ret = futex_wake(uaddr, fshared, val, val3);
break;
- case FUTEX_FD:
- /* non-zero val means F_SETOWN(getpid()) & F_SETSIG(val) */
- ret = futex_fd(uaddr, val);
- break;
case FUTEX_REQUEUE:
ret = futex_requeue(uaddr, fshared, uaddr2, val, val2, NULL);
break;
@@ -2156,19 +2015,6 @@
return do_futex(uaddr, op, val, tp, uaddr2, val2, val3);
}
-static int futexfs_get_sb(struct file_system_type *fs_type,
- int flags, const char *dev_name, void *data,
- struct vfsmount *mnt)
-{
- return get_sb_pseudo(fs_type, "futex", NULL, FUTEXFS_SUPER_MAGIC, mnt);
-}
-
-static struct file_system_type futex_fs_type = {
- .name = "futexfs",
- .get_sb = futexfs_get_sb,
- .kill_sb = kill_anon_super,
-};
-
static int __init futex_init(void)
{
u32 curval;
@@ -2193,16 +2039,6 @@
spin_lock_init(&futex_queues[i].lock);
}
- i = register_filesystem(&futex_fs_type);
- if (i)
- return i;
-
- futex_mnt = kern_mount(&futex_fs_type);
- if (IS_ERR(futex_mnt)) {
- unregister_filesystem(&futex_fs_type);
- return PTR_ERR(futex_mnt);
- }
-
return 0;
}
__initcall(futex_init);
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 9af1d6a..421be5f 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -154,15 +154,6 @@
}
/*
- * Helper function to check, whether the timer is running the callback
- * function
- */
-static inline int hrtimer_callback_running(struct hrtimer *timer)
-{
- return timer->state & HRTIMER_STATE_CALLBACK;
-}
-
-/*
* Functions and macros which are different for UP/SMP systems are kept in a
* single place
*/
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 46e4ad1..46d6611 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -150,6 +150,26 @@
}
EXPORT_SYMBOL(disable_irq);
+static void __enable_irq(struct irq_desc *desc, unsigned int irq)
+{
+ switch (desc->depth) {
+ case 0:
+ printk(KERN_WARNING "Unbalanced enable for IRQ %d\n", irq);
+ WARN_ON(1);
+ break;
+ case 1: {
+ unsigned int status = desc->status & ~IRQ_DISABLED;
+
+ /* Prevent probing on this irq: */
+ desc->status = status | IRQ_NOPROBE;
+ check_irq_resend(desc, irq);
+ /* fall-through */
+ }
+ default:
+ desc->depth--;
+ }
+}
+
/**
* enable_irq - enable handling of an irq
* @irq: Interrupt to enable
@@ -169,22 +189,7 @@
return;
spin_lock_irqsave(&desc->lock, flags);
- switch (desc->depth) {
- case 0:
- printk(KERN_WARNING "Unbalanced enable for IRQ %d\n", irq);
- WARN_ON(1);
- break;
- case 1: {
- unsigned int status = desc->status & ~IRQ_DISABLED;
-
- /* Prevent probing on this irq: */
- desc->status = status | IRQ_NOPROBE;
- check_irq_resend(desc, irq);
- /* fall-through */
- }
- default:
- desc->depth--;
- }
+ __enable_irq(desc, irq);
spin_unlock_irqrestore(&desc->lock, flags);
}
EXPORT_SYMBOL(enable_irq);
@@ -365,7 +370,7 @@
compat_irq_chip_set_default_handler(desc);
desc->status &= ~(IRQ_AUTODETECT | IRQ_WAITING |
- IRQ_INPROGRESS);
+ IRQ_INPROGRESS | IRQ_SPURIOUS_DISABLED);
if (!(desc->status & IRQ_NOAUTOEN)) {
desc->depth = 0;
@@ -381,6 +386,16 @@
/* Reset broken irq detection when installing new handler */
desc->irq_count = 0;
desc->irqs_unhandled = 0;
+
+ /*
+ * Check whether we disabled the irq via the spurious handler
+ * before. Reenable it and give it another chance.
+ */
+ if (shared && (desc->status & IRQ_SPURIOUS_DISABLED)) {
+ desc->status &= ~IRQ_SPURIOUS_DISABLED;
+ __enable_irq(desc, irq);
+ }
+
spin_unlock_irqrestore(&desc->lock, flags);
new->irq = irq;
diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c
index 088dabb..c66d3f1 100644
--- a/kernel/irq/spurious.c
+++ b/kernel/irq/spurious.c
@@ -209,8 +209,8 @@
* Now kill the IRQ
*/
printk(KERN_EMERG "Disabling IRQ #%d\n", irq);
- desc->status |= IRQ_DISABLED;
- desc->depth = 1;
+ desc->status |= IRQ_DISABLED | IRQ_SPURIOUS_DISABLED;
+ desc->depth++;
desc->chip->disable(irq);
}
desc->irqs_unhandled = 0;
diff --git a/kernel/kexec.c b/kernel/kexec.c
index cb85c79..1c5fcac 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -1217,7 +1217,7 @@
}
/* match ? */
- if (system_ram >= start && system_ram <= end) {
+ if (system_ram >= start && system_ram < end) {
*crash_size = size;
break;
}
diff --git a/kernel/kgdb.c b/kernel/kgdb.c
index 1bd0ec1..39e31a0 100644
--- a/kernel/kgdb.c
+++ b/kernel/kgdb.c
@@ -61,7 +61,7 @@
int err_code;
int cpu;
int pass_exception;
- long threadid;
+ unsigned long threadid;
long kgdb_usethreadid;
struct pt_regs *linux_regs;
};
@@ -146,7 +146,7 @@
* the other CPUs might interfere with your debugging context, so
* use this with care:
*/
-int kgdb_do_roundup = 1;
+static int kgdb_do_roundup = 1;
static int __init opt_nokgdbroundup(char *str)
{
@@ -438,7 +438,7 @@
* While we find nice hex chars, build a long_val.
* Return number of chars processed.
*/
-int kgdb_hex2long(char **ptr, long *long_val)
+int kgdb_hex2long(char **ptr, unsigned long *long_val)
{
int hex_val;
int num = 0;
@@ -709,7 +709,7 @@
return 0;
}
-int remove_all_break(void)
+static int remove_all_break(void)
{
unsigned long addr;
int error;
diff --git a/kernel/kmod.c b/kernel/kmod.c
index e276404..8df97d3 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -27,6 +27,7 @@
#include <linux/mnt_namespace.h>
#include <linux/completion.h>
#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/workqueue.h>
#include <linux/security.h>
#include <linux/mount.h>
diff --git a/kernel/module.c b/kernel/module.c
index 8d6cccc..f5e9491 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -164,131 +164,140 @@
return NULL;
}
-static void printk_unused_warning(const char *name)
+static bool always_ok(bool gplok, bool warn, const char *name)
{
- printk(KERN_WARNING "Symbol %s is marked as UNUSED, "
- "however this module is using it.\n", name);
- printk(KERN_WARNING "This symbol will go away in the future.\n");
- printk(KERN_WARNING "Please evalute if this is the right api to use, "
- "and if it really is, submit a report the linux kernel "
- "mailinglist together with submitting your code for "
- "inclusion.\n");
+ return true;
}
-/* Find a symbol, return value, crc and module which owns it */
-static unsigned long __find_symbol(const char *name,
- struct module **owner,
- const unsigned long **crc,
- int gplok)
+static bool printk_unused_warning(bool gplok, bool warn, const char *name)
+{
+ if (warn) {
+ printk(KERN_WARNING "Symbol %s is marked as UNUSED, "
+ "however this module is using it.\n", name);
+ printk(KERN_WARNING
+ "This symbol will go away in the future.\n");
+ printk(KERN_WARNING
+ "Please evalute if this is the right api to use and if "
+ "it really is, submit a report the linux kernel "
+ "mailinglist together with submitting your code for "
+ "inclusion.\n");
+ }
+ return true;
+}
+
+static bool gpl_only_unused_warning(bool gplok, bool warn, const char *name)
+{
+ if (!gplok)
+ return false;
+ return printk_unused_warning(gplok, warn, name);
+}
+
+static bool gpl_only(bool gplok, bool warn, const char *name)
+{
+ return gplok;
+}
+
+static bool warn_if_not_gpl(bool gplok, bool warn, const char *name)
+{
+ if (!gplok && warn) {
+ printk(KERN_WARNING "Symbol %s is being used "
+ "by a non-GPL module, which will not "
+ "be allowed in the future\n", name);
+ printk(KERN_WARNING "Please see the file "
+ "Documentation/feature-removal-schedule.txt "
+ "in the kernel source tree for more details.\n");
+ }
+ return true;
+}
+
+struct symsearch {
+ const struct kernel_symbol *start, *stop;
+ const unsigned long *crcs;
+ bool (*check)(bool gplok, bool warn, const char *name);
+};
+
+/* Look through this array of symbol tables for a symbol match which
+ * passes the check function. */
+static const struct kernel_symbol *search_symarrays(const struct symsearch *arr,
+ unsigned int num,
+ const char *name,
+ bool gplok,
+ bool warn,
+ const unsigned long **crc)
+{
+ unsigned int i;
+ const struct kernel_symbol *ks;
+
+ for (i = 0; i < num; i++) {
+ ks = lookup_symbol(name, arr[i].start, arr[i].stop);
+ if (!ks || !arr[i].check(gplok, warn, name))
+ continue;
+
+ if (crc)
+ *crc = symversion(arr[i].crcs, ks - arr[i].start);
+ return ks;
+ }
+ return NULL;
+}
+
+/* Find a symbol, return value, (optional) crc and (optional) module
+ * which owns it */
+static unsigned long find_symbol(const char *name,
+ struct module **owner,
+ const unsigned long **crc,
+ bool gplok,
+ bool warn)
{
struct module *mod;
const struct kernel_symbol *ks;
+ const struct symsearch arr[] = {
+ { __start___ksymtab, __stop___ksymtab, __start___kcrctab,
+ always_ok },
+ { __start___ksymtab_gpl, __stop___ksymtab_gpl,
+ __start___kcrctab_gpl, gpl_only },
+ { __start___ksymtab_gpl_future, __stop___ksymtab_gpl_future,
+ __start___kcrctab_gpl_future, warn_if_not_gpl },
+ { __start___ksymtab_unused, __stop___ksymtab_unused,
+ __start___kcrctab_unused, printk_unused_warning },
+ { __start___ksymtab_unused_gpl, __stop___ksymtab_unused_gpl,
+ __start___kcrctab_unused_gpl, gpl_only_unused_warning },
+ };
/* Core kernel first. */
- *owner = NULL;
- ks = lookup_symbol(name, __start___ksymtab, __stop___ksymtab);
+ ks = search_symarrays(arr, ARRAY_SIZE(arr), name, gplok, warn, crc);
if (ks) {
- *crc = symversion(__start___kcrctab, (ks - __start___ksymtab));
- return ks->value;
- }
- if (gplok) {
- ks = lookup_symbol(name, __start___ksymtab_gpl,
- __stop___ksymtab_gpl);
- if (ks) {
- *crc = symversion(__start___kcrctab_gpl,
- (ks - __start___ksymtab_gpl));
- return ks->value;
- }
- }
- ks = lookup_symbol(name, __start___ksymtab_gpl_future,
- __stop___ksymtab_gpl_future);
- if (ks) {
- if (!gplok) {
- printk(KERN_WARNING "Symbol %s is being used "
- "by a non-GPL module, which will not "
- "be allowed in the future\n", name);
- printk(KERN_WARNING "Please see the file "
- "Documentation/feature-removal-schedule.txt "
- "in the kernel source tree for more "
- "details.\n");
- }
- *crc = symversion(__start___kcrctab_gpl_future,
- (ks - __start___ksymtab_gpl_future));
- return ks->value;
- }
-
- ks = lookup_symbol(name, __start___ksymtab_unused,
- __stop___ksymtab_unused);
- if (ks) {
- printk_unused_warning(name);
- *crc = symversion(__start___kcrctab_unused,
- (ks - __start___ksymtab_unused));
- return ks->value;
- }
-
- if (gplok)
- ks = lookup_symbol(name, __start___ksymtab_unused_gpl,
- __stop___ksymtab_unused_gpl);
- if (ks) {
- printk_unused_warning(name);
- *crc = symversion(__start___kcrctab_unused_gpl,
- (ks - __start___ksymtab_unused_gpl));
+ if (owner)
+ *owner = NULL;
return ks->value;
}
/* Now try modules. */
list_for_each_entry(mod, &modules, list) {
- *owner = mod;
- ks = lookup_symbol(name, mod->syms, mod->syms + mod->num_syms);
- if (ks) {
- *crc = symversion(mod->crcs, (ks - mod->syms));
- return ks->value;
- }
+ struct symsearch arr[] = {
+ { mod->syms, mod->syms + mod->num_syms, mod->crcs,
+ always_ok },
+ { mod->gpl_syms, mod->gpl_syms + mod->num_gpl_syms,
+ mod->gpl_crcs, gpl_only },
+ { mod->gpl_future_syms,
+ mod->gpl_future_syms + mod->num_gpl_future_syms,
+ mod->gpl_future_crcs, warn_if_not_gpl },
+ { mod->unused_syms,
+ mod->unused_syms + mod->num_unused_syms,
+ mod->unused_crcs, printk_unused_warning },
+ { mod->unused_gpl_syms,
+ mod->unused_gpl_syms + mod->num_unused_gpl_syms,
+ mod->unused_gpl_crcs, gpl_only_unused_warning },
+ };
- if (gplok) {
- ks = lookup_symbol(name, mod->gpl_syms,
- mod->gpl_syms + mod->num_gpl_syms);
- if (ks) {
- *crc = symversion(mod->gpl_crcs,
- (ks - mod->gpl_syms));
- return ks->value;
- }
- }
- ks = lookup_symbol(name, mod->unused_syms, mod->unused_syms + mod->num_unused_syms);
+ ks = search_symarrays(arr, ARRAY_SIZE(arr),
+ name, gplok, warn, crc);
if (ks) {
- printk_unused_warning(name);
- *crc = symversion(mod->unused_crcs, (ks - mod->unused_syms));
- return ks->value;
- }
-
- if (gplok) {
- ks = lookup_symbol(name, mod->unused_gpl_syms,
- mod->unused_gpl_syms + mod->num_unused_gpl_syms);
- if (ks) {
- printk_unused_warning(name);
- *crc = symversion(mod->unused_gpl_crcs,
- (ks - mod->unused_gpl_syms));
- return ks->value;
- }
- }
- ks = lookup_symbol(name, mod->gpl_future_syms,
- (mod->gpl_future_syms +
- mod->num_gpl_future_syms));
- if (ks) {
- if (!gplok) {
- printk(KERN_WARNING "Symbol %s is being used "
- "by a non-GPL module, which will not "
- "be allowed in the future\n", name);
- printk(KERN_WARNING "Please see the file "
- "Documentation/feature-removal-schedule.txt "
- "in the kernel source tree for more "
- "details.\n");
- }
- *crc = symversion(mod->gpl_future_crcs,
- (ks - mod->gpl_future_syms));
+ if (owner)
+ *owner = mod;
return ks->value;
}
}
+
DEBUGP("Failed to find symbol %s\n", name);
return -ENOENT;
}
@@ -736,12 +745,13 @@
if (!forced && module_refcount(mod) != 0)
wait_for_zero_refcount(mod);
+ mutex_unlock(&module_mutex);
/* Final destruction now noone is using it. */
- if (mod->exit != NULL) {
- mutex_unlock(&module_mutex);
+ if (mod->exit != NULL)
mod->exit();
- mutex_lock(&module_mutex);
- }
+ blocking_notifier_call_chain(&module_notify_list,
+ MODULE_STATE_GOING, mod);
+ mutex_lock(&module_mutex);
/* Store the name of the last unloaded module for diagnostic purposes */
strlcpy(last_unloaded_module, mod->name, sizeof(last_unloaded_module));
free_module(mod);
@@ -777,10 +787,9 @@
void __symbol_put(const char *symbol)
{
struct module *owner;
- const unsigned long *crc;
preempt_disable();
- if (IS_ERR_VALUE(__find_symbol(symbol, &owner, &crc, 1)))
+ if (IS_ERR_VALUE(find_symbol(symbol, &owner, NULL, true, false)))
BUG();
module_put(owner);
preempt_enable();
@@ -881,6 +890,19 @@
static const char vermagic[] = VERMAGIC_STRING;
+static int try_to_force_load(struct module *mod, const char *symname)
+{
+#ifdef CONFIG_MODULE_FORCE_LOAD
+ if (!(tainted & TAINT_FORCED_MODULE))
+ printk("%s: no version for \"%s\" found: kernel tainted.\n",
+ mod->name, symname);
+ add_taint_module(mod, TAINT_FORCED_MODULE);
+ return 0;
+#else
+ return -ENOEXEC;
+#endif
+}
+
#ifdef CONFIG_MODVERSIONS
static int check_version(Elf_Shdr *sechdrs,
unsigned int versindex,
@@ -895,6 +917,10 @@
if (!crc)
return 1;
+ /* No versions at all? modprobe --force does this. */
+ if (versindex == 0)
+ return try_to_force_load(mod, symname) == 0;
+
versions = (void *) sechdrs[versindex].sh_addr;
num_versions = sechdrs[versindex].sh_size
/ sizeof(struct modversion_info);
@@ -905,18 +931,19 @@
if (versions[i].crc == *crc)
return 1;
- printk("%s: disagrees about version of symbol %s\n",
- mod->name, symname);
DEBUGP("Found checksum %lX vs module %lX\n",
*crc, versions[i].crc);
- return 0;
+ goto bad_version;
}
- /* Not in module's version table. OK, but that taints the kernel. */
- if (!(tainted & TAINT_FORCED_MODULE))
- printk("%s: no version for \"%s\" found: kernel tainted.\n",
- mod->name, symname);
- add_taint_module(mod, TAINT_FORCED_MODULE);
- return 1;
+
+ printk(KERN_WARNING "%s: no symbol version for %s\n",
+ mod->name, symname);
+ return 0;
+
+bad_version:
+ printk("%s: disagrees about version of symbol %s\n",
+ mod->name, symname);
+ return 0;
}
static inline int check_modstruct_version(Elf_Shdr *sechdrs,
@@ -924,20 +951,20 @@
struct module *mod)
{
const unsigned long *crc;
- struct module *owner;
- if (IS_ERR_VALUE(__find_symbol("struct_module",
- &owner, &crc, 1)))
+ if (IS_ERR_VALUE(find_symbol("struct_module", NULL, &crc, true, false)))
BUG();
- return check_version(sechdrs, versindex, "struct_module", mod,
- crc);
+ return check_version(sechdrs, versindex, "struct_module", mod, crc);
}
-/* First part is kernel version, which we ignore. */
-static inline int same_magic(const char *amagic, const char *bmagic)
+/* First part is kernel version, which we ignore if module has crcs. */
+static inline int same_magic(const char *amagic, const char *bmagic,
+ bool has_crcs)
{
- amagic += strcspn(amagic, " ");
- bmagic += strcspn(bmagic, " ");
+ if (has_crcs) {
+ amagic += strcspn(amagic, " ");
+ bmagic += strcspn(bmagic, " ");
+ }
return strcmp(amagic, bmagic) == 0;
}
#else
@@ -957,7 +984,8 @@
return 1;
}
-static inline int same_magic(const char *amagic, const char *bmagic)
+static inline int same_magic(const char *amagic, const char *bmagic,
+ bool has_crcs)
{
return strcmp(amagic, bmagic) == 0;
}
@@ -974,8 +1002,8 @@
unsigned long ret;
const unsigned long *crc;
- ret = __find_symbol(name, &owner, &crc,
- !(mod->taints & TAINT_PROPRIETARY_MODULE));
+ ret = find_symbol(name, &owner, &crc,
+ !(mod->taints & TAINT_PROPRIETARY_MODULE), true);
if (!IS_ERR_VALUE(ret)) {
/* use_module can fail due to OOM,
or module initialization or unloading */
@@ -991,6 +1019,20 @@
* J. Corbet <corbet@lwn.net>
*/
#if defined(CONFIG_KALLSYMS) && defined(CONFIG_SYSFS)
+struct module_sect_attr
+{
+ struct module_attribute mattr;
+ char *name;
+ unsigned long address;
+};
+
+struct module_sect_attrs
+{
+ struct attribute_group grp;
+ unsigned int nsections;
+ struct module_sect_attr attrs[0];
+};
+
static ssize_t module_sect_show(struct module_attribute *mattr,
struct module *mod, char *buf)
{
@@ -1001,7 +1043,7 @@
static void free_sect_attrs(struct module_sect_attrs *sect_attrs)
{
- int section;
+ unsigned int section;
for (section = 0; section < sect_attrs->nsections; section++)
kfree(sect_attrs->attrs[section].name);
@@ -1362,10 +1404,9 @@
{
struct module *owner;
unsigned long value;
- const unsigned long *crc;
preempt_disable();
- value = __find_symbol(symbol, &owner, &crc, 1);
+ value = find_symbol(symbol, &owner, NULL, true, true);
if (IS_ERR_VALUE(value))
value = 0;
else if (strong_try_module_get(owner))
@@ -1382,33 +1423,33 @@
*/
static int verify_export_symbols(struct module *mod)
{
- const char *name = NULL;
- unsigned long i, ret = 0;
+ unsigned int i;
struct module *owner;
- const unsigned long *crc;
+ const struct kernel_symbol *s;
+ struct {
+ const struct kernel_symbol *sym;
+ unsigned int num;
+ } arr[] = {
+ { mod->syms, mod->num_syms },
+ { mod->gpl_syms, mod->num_gpl_syms },
+ { mod->gpl_future_syms, mod->num_gpl_future_syms },
+ { mod->unused_syms, mod->num_unused_syms },
+ { mod->unused_gpl_syms, mod->num_unused_gpl_syms },
+ };
- for (i = 0; i < mod->num_syms; i++)
- if (!IS_ERR_VALUE(__find_symbol(mod->syms[i].name,
- &owner, &crc, 1))) {
- name = mod->syms[i].name;
- ret = -ENOEXEC;
- goto dup;
+ for (i = 0; i < ARRAY_SIZE(arr); i++) {
+ for (s = arr[i].sym; s < arr[i].sym + arr[i].num; s++) {
+ if (!IS_ERR_VALUE(find_symbol(s->name, &owner,
+ NULL, true, false))) {
+ printk(KERN_ERR
+ "%s: exports duplicate symbol %s"
+ " (owned by %s)\n",
+ mod->name, s->name, module_name(owner));
+ return -ENOEXEC;
+ }
}
-
- for (i = 0; i < mod->num_gpl_syms; i++)
- if (!IS_ERR_VALUE(__find_symbol(mod->gpl_syms[i].name,
- &owner, &crc, 1))) {
- name = mod->gpl_syms[i].name;
- ret = -ENOEXEC;
- goto dup;
- }
-
-dup:
- if (ret)
- printk(KERN_ERR "%s: exports duplicate symbol %s (owned by %s)\n",
- mod->name, name, module_name(owner));
-
- return ret;
+ }
+ return 0;
}
/* Change all symbols so that st_value encodes the pointer directly. */
@@ -1814,8 +1855,9 @@
unwindex = find_sec(hdr, sechdrs, secstrings, ARCH_UNWIND_SECTION_NAME);
#endif
- /* Don't keep modinfo section */
+ /* Don't keep modinfo and version sections. */
sechdrs[infoindex].sh_flags &= ~(unsigned long)SHF_ALLOC;
+ sechdrs[versindex].sh_flags &= ~(unsigned long)SHF_ALLOC;
#ifdef CONFIG_KALLSYMS
/* Keep symbol and string tables for decoding later. */
sechdrs[symindex].sh_flags |= SHF_ALLOC;
@@ -1833,10 +1875,10 @@
modmagic = get_modinfo(sechdrs, infoindex, "vermagic");
/* This is allowed: modprobe --force will invalidate it. */
if (!modmagic) {
- add_taint_module(mod, TAINT_FORCED_MODULE);
- printk(KERN_WARNING "%s: no version magic, tainting kernel.\n",
- mod->name);
- } else if (!same_magic(modmagic, vermagic)) {
+ err = try_to_force_load(mod, "magic");
+ if (err)
+ goto free_hdr;
+ } else if (!same_magic(modmagic, vermagic, versindex)) {
printk(KERN_ERR "%s: version magic '%s' should be '%s'\n",
mod->name, modmagic, vermagic);
err = -ENOEXEC;
@@ -1977,7 +2019,8 @@
mod->unused_crcs = (void *)sechdrs[unusedcrcindex].sh_addr;
mod->unused_gpl_syms = (void *)sechdrs[unusedgplindex].sh_addr;
if (unusedgplcrcindex)
- mod->unused_crcs = (void *)sechdrs[unusedgplcrcindex].sh_addr;
+ mod->unused_gpl_crcs
+ = (void *)sechdrs[unusedgplcrcindex].sh_addr;
#ifdef CONFIG_MODVERSIONS
if ((mod->num_syms && !crcindex) ||
@@ -1985,9 +2028,10 @@
(mod->num_gpl_future_syms && !gplfuturecrcindex) ||
(mod->num_unused_syms && !unusedcrcindex) ||
(mod->num_unused_gpl_syms && !unusedgplcrcindex)) {
- printk(KERN_WARNING "%s: No versions for exported symbols."
- " Tainting kernel.\n", mod->name);
- add_taint_module(mod, TAINT_FORCED_MODULE);
+ printk(KERN_WARNING "%s: No versions for exported symbols.\n", mod->name);
+ err = try_to_force_load(mod, "nocrc");
+ if (err)
+ goto cleanup;
}
#endif
markersindex = find_sec(hdr, sechdrs, secstrings, "__markers");
@@ -2171,6 +2215,8 @@
mod->state = MODULE_STATE_GOING;
synchronize_sched();
module_put(mod);
+ blocking_notifier_call_chain(&module_notify_list,
+ MODULE_STATE_GOING, mod);
mutex_lock(&module_mutex);
free_module(mod);
mutex_unlock(&module_mutex);
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index ae5c6c1..f1525ad0 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -4,8 +4,9 @@
#include <linux/sched.h>
#include <linux/posix-timers.h>
-#include <asm/uaccess.h>
#include <linux/errno.h>
+#include <linux/math64.h>
+#include <asm/uaccess.h>
static int check_clock(const clockid_t which_clock)
{
@@ -47,12 +48,10 @@
union cpu_time_count cpu,
struct timespec *tp)
{
- if (CPUCLOCK_WHICH(which_clock) == CPUCLOCK_SCHED) {
- tp->tv_sec = div_long_long_rem(cpu.sched,
- NSEC_PER_SEC, &tp->tv_nsec);
- } else {
+ if (CPUCLOCK_WHICH(which_clock) == CPUCLOCK_SCHED)
+ *tp = ns_to_timespec(cpu.sched);
+ else
cputime_to_timespec(cpu.cpu, tp);
- }
}
static inline int cpu_time_before(const clockid_t which_clock,
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index dcc199c..6c19e94 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -534,7 +534,6 @@
#define arch_ptrace_attach(child) do { } while (0)
#endif
-#ifndef __ARCH_SYS_PTRACE
asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
{
struct task_struct *child;
@@ -582,7 +581,6 @@
unlock_kernel();
return ret;
}
-#endif /* __ARCH_SYS_PTRACE */
int generic_ptrace_peekdata(struct task_struct *tsk, long addr, long data)
{
diff --git a/kernel/relay.c b/kernel/relay.c
index 7de644c..bc24dcd 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -1191,7 +1191,7 @@
ret = 0;
spliced = 0;
- while (len && !spliced) {
+ while (len) {
ret = subbuf_splice_actor(in, ppos, pipe, len, flags, &nonpad_ret);
if (ret < 0)
break;
diff --git a/kernel/sched.c b/kernel/sched.c
index e2f7f5ac..8841a91 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -75,16 +75,6 @@
#include <asm/irq_regs.h>
/*
- * Scheduler clock - returns current time in nanosec units.
- * This is default implementation.
- * Architectures and sub-architectures can override this.
- */
-unsigned long long __attribute__((weak)) sched_clock(void)
-{
- return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
-}
-
-/*
* Convert user-nice values [ -20 ... 0 ... 19 ]
* to static priority [ MAX_RT_PRIO..MAX_PRIO-1 ],
* and back.
@@ -242,6 +232,12 @@
}
#endif
+/*
+ * sched_domains_mutex serializes calls to arch_init_sched_domains,
+ * detach_destroy_domains and partition_sched_domains.
+ */
+static DEFINE_MUTEX(sched_domains_mutex);
+
#ifdef CONFIG_GROUP_SCHED
#include <linux/cgroup.h>
@@ -308,9 +304,6 @@
*/
static DEFINE_SPINLOCK(task_group_lock);
-/* doms_cur_mutex serializes access to doms_cur[] array */
-static DEFINE_MUTEX(doms_cur_mutex);
-
#ifdef CONFIG_FAIR_GROUP_SCHED
#ifdef CONFIG_USER_SCHED
# define INIT_TASK_GROUP_LOAD (2*NICE_0_LOAD)
@@ -318,7 +311,13 @@
# define INIT_TASK_GROUP_LOAD NICE_0_LOAD
#endif
+/*
+ * A weight of 0, 1 or ULONG_MAX can cause arithmetics problems.
+ * (The default weight is 1024 - so there's no practical
+ * limitation from this.)
+ */
#define MIN_SHARES 2
+#define MAX_SHARES (ULONG_MAX - 1)
static int init_task_group_load = INIT_TASK_GROUP_LOAD;
#endif
@@ -358,21 +357,9 @@
#endif
}
-static inline void lock_doms_cur(void)
-{
- mutex_lock(&doms_cur_mutex);
-}
-
-static inline void unlock_doms_cur(void)
-{
- mutex_unlock(&doms_cur_mutex);
-}
-
#else
static inline void set_task_rq(struct task_struct *p, unsigned int cpu) { }
-static inline void lock_doms_cur(void) { }
-static inline void unlock_doms_cur(void) { }
#endif /* CONFIG_GROUP_SCHED */
@@ -560,13 +547,7 @@
unsigned long next_balance;
struct mm_struct *prev_mm;
- u64 clock, prev_clock_raw;
- s64 clock_max_delta;
-
- unsigned int clock_warps, clock_overflows, clock_underflows;
- u64 idle_clock;
- unsigned int clock_deep_idle_events;
- u64 tick_timestamp;
+ u64 clock;
atomic_t nr_iowait;
@@ -631,82 +612,6 @@
#endif
}
-#ifdef CONFIG_NO_HZ
-static inline bool nohz_on(int cpu)
-{
- return tick_get_tick_sched(cpu)->nohz_mode != NOHZ_MODE_INACTIVE;
-}
-
-static inline u64 max_skipped_ticks(struct rq *rq)
-{
- return nohz_on(cpu_of(rq)) ? jiffies - rq->last_tick_seen + 2 : 1;
-}
-
-static inline void update_last_tick_seen(struct rq *rq)
-{
- rq->last_tick_seen = jiffies;
-}
-#else
-static inline u64 max_skipped_ticks(struct rq *rq)
-{
- return 1;
-}
-
-static inline void update_last_tick_seen(struct rq *rq)
-{
-}
-#endif
-
-/*
- * Update the per-runqueue clock, as finegrained as the platform can give
- * us, but without assuming monotonicity, etc.:
- */
-static void __update_rq_clock(struct rq *rq)
-{
- u64 prev_raw = rq->prev_clock_raw;
- u64 now = sched_clock();
- s64 delta = now - prev_raw;
- u64 clock = rq->clock;
-
-#ifdef CONFIG_SCHED_DEBUG
- WARN_ON_ONCE(cpu_of(rq) != smp_processor_id());
-#endif
- /*
- * Protect against sched_clock() occasionally going backwards:
- */
- if (unlikely(delta < 0)) {
- clock++;
- rq->clock_warps++;
- } else {
- /*
- * Catch too large forward jumps too:
- */
- u64 max_jump = max_skipped_ticks(rq) * TICK_NSEC;
- u64 max_time = rq->tick_timestamp + max_jump;
-
- if (unlikely(clock + delta > max_time)) {
- if (clock < max_time)
- clock = max_time;
- else
- clock++;
- rq->clock_overflows++;
- } else {
- if (unlikely(delta > rq->clock_max_delta))
- rq->clock_max_delta = delta;
- clock += delta;
- }
- }
-
- rq->prev_clock_raw = now;
- rq->clock = clock;
-}
-
-static void update_rq_clock(struct rq *rq)
-{
- if (likely(smp_processor_id() == cpu_of(rq)))
- __update_rq_clock(rq);
-}
-
/*
* The domain tree (rq->sd) is protected by RCU's quiescent state transition.
* See detach_destroy_domains: synchronize_sched for details.
@@ -722,6 +627,11 @@
#define task_rq(p) cpu_rq(task_cpu(p))
#define cpu_curr(cpu) (cpu_rq(cpu)->curr)
+static inline void update_rq_clock(struct rq *rq)
+{
+ rq->clock = sched_clock_cpu(cpu_of(rq));
+}
+
/*
* Tunables that become constants when CONFIG_SCHED_DEBUG is off:
*/
@@ -757,14 +667,14 @@
#define SCHED_FEAT(name, enabled) \
#name ,
-__read_mostly char *sched_feat_names[] = {
+static __read_mostly char *sched_feat_names[] = {
#include "sched_features.h"
NULL
};
#undef SCHED_FEAT
-int sched_feat_open(struct inode *inode, struct file *filp)
+static int sched_feat_open(struct inode *inode, struct file *filp)
{
filp->private_data = inode->i_private;
return 0;
@@ -899,7 +809,7 @@
return (u64)sysctl_sched_rt_runtime * NSEC_PER_USEC;
}
-static const unsigned long long time_sync_thresh = 100000;
+unsigned long long time_sync_thresh = 100000;
static DEFINE_PER_CPU(unsigned long long, time_offset);
static DEFINE_PER_CPU(unsigned long long, prev_cpu_time);
@@ -913,11 +823,14 @@
static DEFINE_SPINLOCK(time_sync_lock);
static unsigned long long prev_global_time;
-static unsigned long long __sync_cpu_clock(cycles_t time, int cpu)
+static unsigned long long __sync_cpu_clock(unsigned long long time, int cpu)
{
- unsigned long flags;
-
- spin_lock_irqsave(&time_sync_lock, flags);
+ /*
+ * We want this inlined, to not get tracer function calls
+ * in this critical section:
+ */
+ spin_acquire(&time_sync_lock.dep_map, 0, 0, _THIS_IP_);
+ __raw_spin_lock(&time_sync_lock.raw_lock);
if (time < prev_global_time) {
per_cpu(time_offset, cpu) += prev_global_time - time;
@@ -926,7 +839,8 @@
prev_global_time = time;
}
- spin_unlock_irqrestore(&time_sync_lock, flags);
+ __raw_spin_unlock(&time_sync_lock.raw_lock);
+ spin_release(&time_sync_lock.dep_map, 1, _THIS_IP_);
return time;
}
@@ -934,8 +848,6 @@
static unsigned long long __cpu_clock(int cpu)
{
unsigned long long now;
- unsigned long flags;
- struct rq *rq;
/*
* Only call sched_clock() if the scheduler has already been
@@ -944,11 +856,7 @@
if (unlikely(!scheduler_running))
return 0;
- local_irq_save(flags);
- rq = cpu_rq(cpu);
- update_rq_clock(rq);
- now = rq->clock;
- local_irq_restore(flags);
+ now = sched_clock_cpu(cpu);
return now;
}
@@ -960,13 +868,18 @@
unsigned long long cpu_clock(int cpu)
{
unsigned long long prev_cpu_time, time, delta_time;
+ unsigned long flags;
+ local_irq_save(flags);
prev_cpu_time = per_cpu(prev_cpu_time, cpu);
time = __cpu_clock(cpu) + per_cpu(time_offset, cpu);
delta_time = time-prev_cpu_time;
- if (unlikely(delta_time > time_sync_thresh))
+ if (unlikely(delta_time > time_sync_thresh)) {
time = __sync_cpu_clock(time, cpu);
+ per_cpu(prev_cpu_time, cpu) = time;
+ }
+ local_irq_restore(flags);
return time;
}
@@ -1117,43 +1030,6 @@
return rq;
}
-/*
- * We are going deep-idle (irqs are disabled):
- */
-void sched_clock_idle_sleep_event(void)
-{
- struct rq *rq = cpu_rq(smp_processor_id());
-
- spin_lock(&rq->lock);
- __update_rq_clock(rq);
- spin_unlock(&rq->lock);
- rq->clock_deep_idle_events++;
-}
-EXPORT_SYMBOL_GPL(sched_clock_idle_sleep_event);
-
-/*
- * We just idled delta nanoseconds (called with irqs disabled):
- */
-void sched_clock_idle_wakeup_event(u64 delta_ns)
-{
- struct rq *rq = cpu_rq(smp_processor_id());
- u64 now = sched_clock();
-
- rq->idle_clock += delta_ns;
- /*
- * Override the previous timestamp and ignore all
- * sched_clock() deltas that occured while we idled,
- * and use the PM-provided delta_ns to advance the
- * rq clock:
- */
- spin_lock(&rq->lock);
- rq->prev_clock_raw = now;
- rq->clock += delta_ns;
- spin_unlock(&rq->lock);
- touch_softlockup_watchdog();
-}
-EXPORT_SYMBOL_GPL(sched_clock_idle_wakeup_event);
-
static void __resched_task(struct task_struct *p, int tif_bit);
static inline void resched_task(struct task_struct *p)
@@ -1189,6 +1065,7 @@
enum {
HRTICK_SET, /* re-programm hrtick_timer */
HRTICK_RESET, /* not a new slice */
+ HRTICK_BLOCK, /* stop hrtick operations */
};
/*
@@ -1200,6 +1077,8 @@
{
if (!sched_feat(HRTICK))
return 0;
+ if (unlikely(test_bit(HRTICK_BLOCK, &rq->hrtick_flags)))
+ return 0;
return hrtimer_is_hres_active(&rq->hrtick_timer);
}
@@ -1275,14 +1154,70 @@
WARN_ON_ONCE(cpu_of(rq) != smp_processor_id());
spin_lock(&rq->lock);
- __update_rq_clock(rq);
+ update_rq_clock(rq);
rq->curr->sched_class->task_tick(rq, rq->curr, 1);
spin_unlock(&rq->lock);
return HRTIMER_NORESTART;
}
-static inline void init_rq_hrtick(struct rq *rq)
+static void hotplug_hrtick_disable(int cpu)
+{
+ struct rq *rq = cpu_rq(cpu);
+ unsigned long flags;
+
+ spin_lock_irqsave(&rq->lock, flags);
+ rq->hrtick_flags = 0;
+ __set_bit(HRTICK_BLOCK, &rq->hrtick_flags);
+ spin_unlock_irqrestore(&rq->lock, flags);
+
+ hrtick_clear(rq);
+}
+
+static void hotplug_hrtick_enable(int cpu)
+{
+ struct rq *rq = cpu_rq(cpu);
+ unsigned long flags;
+
+ spin_lock_irqsave(&rq->lock, flags);
+ __clear_bit(HRTICK_BLOCK, &rq->hrtick_flags);
+ spin_unlock_irqrestore(&rq->lock, flags);
+}
+
+static int
+hotplug_hrtick(struct notifier_block *nfb, unsigned long action, void *hcpu)
+{
+ int cpu = (int)(long)hcpu;
+
+ switch (action) {
+ case CPU_UP_CANCELED:
+ case CPU_UP_CANCELED_FROZEN:
+ case CPU_DOWN_PREPARE:
+ case CPU_DOWN_PREPARE_FROZEN:
+ case CPU_DEAD:
+ case CPU_DEAD_FROZEN:
+ hotplug_hrtick_disable(cpu);
+ return NOTIFY_OK;
+
+ case CPU_UP_PREPARE:
+ case CPU_UP_PREPARE_FROZEN:
+ case CPU_DOWN_FAILED:
+ case CPU_DOWN_FAILED_FROZEN:
+ case CPU_ONLINE:
+ case CPU_ONLINE_FROZEN:
+ hotplug_hrtick_enable(cpu);
+ return NOTIFY_OK;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static void init_hrtick(void)
+{
+ hotcpu_notifier(hotplug_hrtick, 0);
+}
+
+static void init_rq_hrtick(struct rq *rq)
{
rq->hrtick_flags = 0;
hrtimer_init(&rq->hrtick_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
@@ -1319,6 +1254,10 @@
void hrtick_resched(void)
{
}
+
+static inline void init_hrtick(void)
+{
+}
#endif
/*
@@ -1438,8 +1377,8 @@
{
u64 tmp;
- if (unlikely(!lw->inv_weight))
- lw->inv_weight = (WMULT_CONST-lw->weight/2) / (lw->weight+1);
+ if (!lw->inv_weight)
+ lw->inv_weight = 1 + (WMULT_CONST-lw->weight/2)/(lw->weight+1);
tmp = (u64)delta_exec * weight;
/*
@@ -1748,6 +1687,8 @@
if (shares < MIN_SHARES)
shares = MIN_SHARES;
+ else if (shares > MAX_SHARES)
+ shares = MAX_SHARES;
__set_se_shares(tg->se[tcpu], shares);
}
@@ -4339,8 +4280,10 @@
struct rq *rq = this_rq();
cputime64_t tmp;
- if ((p->flags & PF_VCPU) && (irq_count() - hardirq_offset == 0))
- return account_guest_time(p, cputime);
+ if ((p->flags & PF_VCPU) && (irq_count() - hardirq_offset == 0)) {
+ account_guest_time(p, cputime);
+ return;
+ }
p->stime = cputime_add(p->stime, cputime);
@@ -4404,19 +4347,11 @@
int cpu = smp_processor_id();
struct rq *rq = cpu_rq(cpu);
struct task_struct *curr = rq->curr;
- u64 next_tick = rq->tick_timestamp + TICK_NSEC;
+
+ sched_clock_tick();
spin_lock(&rq->lock);
- __update_rq_clock(rq);
- /*
- * Let rq->clock advance by at least TICK_NSEC:
- */
- if (unlikely(rq->clock < next_tick)) {
- rq->clock = next_tick;
- rq->clock_underflows++;
- }
- rq->tick_timestamp = rq->clock;
- update_last_tick_seen(rq);
+ update_rq_clock(rq);
update_cpu_load(rq);
curr->sched_class->task_tick(rq, curr, 0);
spin_unlock(&rq->lock);
@@ -4570,7 +4505,7 @@
* Do the rq-clock update outside the rq lock:
*/
local_irq_disable();
- __update_rq_clock(rq);
+ update_rq_clock(rq);
spin_lock(&rq->lock);
clear_tsk_need_resched(prev);
@@ -4595,9 +4530,9 @@
prev->sched_class->put_prev_task(rq, prev);
next = pick_next_task(rq, prev);
- sched_info_switch(prev, next);
-
if (likely(prev != next)) {
+ sched_info_switch(prev, next);
+
rq->nr_switches++;
rq->curr = next;
++*switch_count;
@@ -4632,8 +4567,6 @@
asmlinkage void __sched preempt_schedule(void)
{
struct thread_info *ti = current_thread_info();
- struct task_struct *task = current;
- int saved_lock_depth;
/*
* If there is a non-zero preempt_count or interrupts are disabled,
@@ -4644,16 +4577,7 @@
do {
add_preempt_count(PREEMPT_ACTIVE);
-
- /*
- * We keep the big kernel semaphore locked, but we
- * clear ->lock_depth so that schedule() doesnt
- * auto-release the semaphore:
- */
- saved_lock_depth = task->lock_depth;
- task->lock_depth = -1;
schedule();
- task->lock_depth = saved_lock_depth;
sub_preempt_count(PREEMPT_ACTIVE);
/*
@@ -4674,26 +4598,15 @@
asmlinkage void __sched preempt_schedule_irq(void)
{
struct thread_info *ti = current_thread_info();
- struct task_struct *task = current;
- int saved_lock_depth;
/* Catch callers which need to be fixed */
BUG_ON(ti->preempt_count || !irqs_disabled());
do {
add_preempt_count(PREEMPT_ACTIVE);
-
- /*
- * We keep the big kernel semaphore locked, but we
- * clear ->lock_depth so that schedule() doesnt
- * auto-release the semaphore:
- */
- saved_lock_depth = task->lock_depth;
- task->lock_depth = -1;
local_irq_enable();
schedule();
local_irq_disable();
- task->lock_depth = saved_lock_depth;
sub_preempt_count(PREEMPT_ACTIVE);
/*
@@ -5612,7 +5525,6 @@
} while (need_resched());
}
-#if !defined(CONFIG_PREEMPT) || defined(CONFIG_PREEMPT_VOLUNTARY)
int __sched _cond_resched(void)
{
if (need_resched() && !(preempt_count() & PREEMPT_ACTIVE) &&
@@ -5623,7 +5535,6 @@
return 0;
}
EXPORT_SYMBOL(_cond_resched);
-#endif
/*
* cond_resched_lock() - if a reschedule is pending, drop the given lock,
@@ -5918,8 +5829,11 @@
spin_unlock_irqrestore(&rq->lock, flags);
/* Set the preempt count _outside_ the spinlocks! */
+#if defined(CONFIG_PREEMPT)
+ task_thread_info(idle)->preempt_count = (idle->lock_depth >= 0);
+#else
task_thread_info(idle)->preempt_count = 0;
-
+#endif
/*
* The idle tasks have their own, simple scheduling class:
*/
@@ -7755,7 +7669,7 @@
{
int i, j;
- lock_doms_cur();
+ mutex_lock(&sched_domains_mutex);
/* always unregister in case we don't destroy any domains */
unregister_sched_domain_sysctl();
@@ -7804,7 +7718,7 @@
register_sched_domain_sysctl();
- unlock_doms_cur();
+ mutex_unlock(&sched_domains_mutex);
}
#if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
@@ -7813,8 +7727,10 @@
int err;
get_online_cpus();
+ mutex_lock(&sched_domains_mutex);
detach_destroy_domains(&cpu_online_map);
err = arch_init_sched_domains(&cpu_online_map);
+ mutex_unlock(&sched_domains_mutex);
put_online_cpus();
return err;
@@ -7932,13 +7848,16 @@
BUG_ON(sched_group_nodes_bycpu == NULL);
#endif
get_online_cpus();
+ mutex_lock(&sched_domains_mutex);
arch_init_sched_domains(&cpu_online_map);
cpus_andnot(non_isolated_cpus, cpu_possible_map, cpu_isolated_map);
if (cpus_empty(non_isolated_cpus))
cpu_set(smp_processor_id(), non_isolated_cpus);
+ mutex_unlock(&sched_domains_mutex);
put_online_cpus();
/* XXX: Theoretical race here - CPU may be hotplugged now */
hotcpu_notifier(update_sched_domains, 0);
+ init_hrtick();
/* Move init over to a non-isolated CPU */
if (set_cpus_allowed_ptr(current, &non_isolated_cpus) < 0)
@@ -8025,7 +7944,7 @@
se->my_q = cfs_rq;
se->load.weight = tg->shares;
- se->load.inv_weight = div64_64(1ULL<<32, se->load.weight);
+ se->load.inv_weight = 0;
se->parent = parent;
}
#endif
@@ -8149,8 +8068,6 @@
spin_lock_init(&rq->lock);
lockdep_set_class(&rq->lock, &rq->rq_lock_key);
rq->nr_running = 0;
- rq->clock = 1;
- update_last_tick_seen(rq);
init_cfs_rq(&rq->cfs, rq);
init_rt_rq(&rq->rt, rq);
#ifdef CONFIG_FAIR_GROUP_SCHED
@@ -8294,6 +8211,7 @@
static void normalize_task(struct rq *rq, struct task_struct *p)
{
int on_rq;
+
update_rq_clock(rq);
on_rq = p->se.on_rq;
if (on_rq)
@@ -8325,7 +8243,6 @@
p->se.sleep_start = 0;
p->se.block_start = 0;
#endif
- task_rq(p)->clock = 0;
if (!rt_task(p)) {
/*
@@ -8692,7 +8609,7 @@
dequeue_entity(cfs_rq, se, 0);
se->load.weight = shares;
- se->load.inv_weight = div64_64((1ULL<<32), shares);
+ se->load.inv_weight = 0;
if (on_rq)
enqueue_entity(cfs_rq, se, 0);
@@ -8722,13 +8639,10 @@
if (!tg->se[0])
return -EINVAL;
- /*
- * A weight of 0 or 1 can cause arithmetics problems.
- * (The default weight is 1024 - so there's no practical
- * limitation from this.)
- */
if (shares < MIN_SHARES)
shares = MIN_SHARES;
+ else if (shares > MAX_SHARES)
+ shares = MAX_SHARES;
mutex_lock(&shares_mutex);
if (tg->shares == shares)
@@ -8753,7 +8667,7 @@
* force a rebalance
*/
cfs_rq_set_shares(tg->cfs_rq[i], 0);
- set_se_shares(tg->se[i], shares/nr_cpu_ids);
+ set_se_shares(tg->se[i], shares);
}
/*
@@ -8787,7 +8701,7 @@
if (runtime == RUNTIME_INF)
return 1ULL << 16;
- return div64_64(runtime << 16, period);
+ return div64_u64(runtime << 16, period);
}
#ifdef CONFIG_CGROUP_SCHED
diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c
new file mode 100644
index 0000000..9c597e3
--- /dev/null
+++ b/kernel/sched_clock.c
@@ -0,0 +1,236 @@
+/*
+ * sched_clock for unstable cpu clocks
+ *
+ * Copyright (C) 2008 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ *
+ * Based on code by:
+ * Ingo Molnar <mingo@redhat.com>
+ * Guillaume Chazarain <guichaz@gmail.com>
+ *
+ * Create a semi stable clock from a mixture of other events, including:
+ * - gtod
+ * - jiffies
+ * - sched_clock()
+ * - explicit idle events
+ *
+ * We use gtod as base and the unstable clock deltas. The deltas are filtered,
+ * making it monotonic and keeping it within an expected window. This window
+ * is set up using jiffies.
+ *
+ * Furthermore, explicit sleep and wakeup hooks allow us to account for time
+ * that is otherwise invisible (TSC gets stopped).
+ *
+ * The clock: sched_clock_cpu() is monotonic per cpu, and should be somewhat
+ * consistent between cpus (never more than 1 jiffies difference).
+ */
+#include <linux/sched.h>
+#include <linux/percpu.h>
+#include <linux/spinlock.h>
+#include <linux/ktime.h>
+#include <linux/module.h>
+
+
+#ifdef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
+
+struct sched_clock_data {
+ /*
+ * Raw spinlock - this is a special case: this might be called
+ * from within instrumentation code so we dont want to do any
+ * instrumentation ourselves.
+ */
+ raw_spinlock_t lock;
+
+ unsigned long prev_jiffies;
+ u64 prev_raw;
+ u64 tick_raw;
+ u64 tick_gtod;
+ u64 clock;
+};
+
+static DEFINE_PER_CPU_SHARED_ALIGNED(struct sched_clock_data, sched_clock_data);
+
+static inline struct sched_clock_data *this_scd(void)
+{
+ return &__get_cpu_var(sched_clock_data);
+}
+
+static inline struct sched_clock_data *cpu_sdc(int cpu)
+{
+ return &per_cpu(sched_clock_data, cpu);
+}
+
+void sched_clock_init(void)
+{
+ u64 ktime_now = ktime_to_ns(ktime_get());
+ u64 now = 0;
+ int cpu;
+
+ for_each_possible_cpu(cpu) {
+ struct sched_clock_data *scd = cpu_sdc(cpu);
+
+ scd->lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
+ scd->prev_jiffies = jiffies;
+ scd->prev_raw = now;
+ scd->tick_raw = now;
+ scd->tick_gtod = ktime_now;
+ scd->clock = ktime_now;
+ }
+}
+
+/*
+ * update the percpu scd from the raw @now value
+ *
+ * - filter out backward motion
+ * - use jiffies to generate a min,max window to clip the raw values
+ */
+static void __update_sched_clock(struct sched_clock_data *scd, u64 now)
+{
+ unsigned long now_jiffies = jiffies;
+ long delta_jiffies = now_jiffies - scd->prev_jiffies;
+ u64 clock = scd->clock;
+ u64 min_clock, max_clock;
+ s64 delta = now - scd->prev_raw;
+
+ WARN_ON_ONCE(!irqs_disabled());
+ min_clock = scd->tick_gtod + delta_jiffies * TICK_NSEC;
+
+ if (unlikely(delta < 0)) {
+ clock++;
+ goto out;
+ }
+
+ max_clock = min_clock + TICK_NSEC;
+
+ if (unlikely(clock + delta > max_clock)) {
+ if (clock < max_clock)
+ clock = max_clock;
+ else
+ clock++;
+ } else {
+ clock += delta;
+ }
+
+ out:
+ if (unlikely(clock < min_clock))
+ clock = min_clock;
+
+ scd->prev_raw = now;
+ scd->prev_jiffies = now_jiffies;
+ scd->clock = clock;
+}
+
+static void lock_double_clock(struct sched_clock_data *data1,
+ struct sched_clock_data *data2)
+{
+ if (data1 < data2) {
+ __raw_spin_lock(&data1->lock);
+ __raw_spin_lock(&data2->lock);
+ } else {
+ __raw_spin_lock(&data2->lock);
+ __raw_spin_lock(&data1->lock);
+ }
+}
+
+u64 sched_clock_cpu(int cpu)
+{
+ struct sched_clock_data *scd = cpu_sdc(cpu);
+ u64 now, clock;
+
+ WARN_ON_ONCE(!irqs_disabled());
+ now = sched_clock();
+
+ if (cpu != raw_smp_processor_id()) {
+ /*
+ * in order to update a remote cpu's clock based on our
+ * unstable raw time rebase it against:
+ * tick_raw (offset between raw counters)
+ * tick_gotd (tick offset between cpus)
+ */
+ struct sched_clock_data *my_scd = this_scd();
+
+ lock_double_clock(scd, my_scd);
+
+ now -= my_scd->tick_raw;
+ now += scd->tick_raw;
+
+ now -= my_scd->tick_gtod;
+ now += scd->tick_gtod;
+
+ __raw_spin_unlock(&my_scd->lock);
+ } else {
+ __raw_spin_lock(&scd->lock);
+ }
+
+ __update_sched_clock(scd, now);
+ clock = scd->clock;
+
+ __raw_spin_unlock(&scd->lock);
+
+ return clock;
+}
+
+void sched_clock_tick(void)
+{
+ struct sched_clock_data *scd = this_scd();
+ u64 now, now_gtod;
+
+ WARN_ON_ONCE(!irqs_disabled());
+
+ now = sched_clock();
+ now_gtod = ktime_to_ns(ktime_get());
+
+ __raw_spin_lock(&scd->lock);
+ __update_sched_clock(scd, now);
+ /*
+ * update tick_gtod after __update_sched_clock() because that will
+ * already observe 1 new jiffy; adding a new tick_gtod to that would
+ * increase the clock 2 jiffies.
+ */
+ scd->tick_raw = now;
+ scd->tick_gtod = now_gtod;
+ __raw_spin_unlock(&scd->lock);
+}
+
+/*
+ * We are going deep-idle (irqs are disabled):
+ */
+void sched_clock_idle_sleep_event(void)
+{
+ sched_clock_cpu(smp_processor_id());
+}
+EXPORT_SYMBOL_GPL(sched_clock_idle_sleep_event);
+
+/*
+ * We just idled delta nanoseconds (called with irqs disabled):
+ */
+void sched_clock_idle_wakeup_event(u64 delta_ns)
+{
+ struct sched_clock_data *scd = this_scd();
+ u64 now = sched_clock();
+
+ /*
+ * Override the previous timestamp and ignore all
+ * sched_clock() deltas that occured while we idled,
+ * and use the PM-provided delta_ns to advance the
+ * rq clock:
+ */
+ __raw_spin_lock(&scd->lock);
+ scd->prev_raw = now;
+ scd->clock += delta_ns;
+ __raw_spin_unlock(&scd->lock);
+
+ touch_softlockup_watchdog();
+}
+EXPORT_SYMBOL_GPL(sched_clock_idle_wakeup_event);
+
+#endif
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ * This is default implementation.
+ * Architectures and sub-architectures can override this.
+ */
+unsigned long long __attribute__((weak)) sched_clock(void)
+{
+ return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
+}
diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c
index 8a9498e..5f06118 100644
--- a/kernel/sched_debug.c
+++ b/kernel/sched_debug.c
@@ -204,13 +204,6 @@
PN(next_balance);
P(curr->pid);
PN(clock);
- PN(idle_clock);
- PN(prev_clock_raw);
- P(clock_warps);
- P(clock_overflows);
- P(clock_underflows);
- P(clock_deep_idle_events);
- PN(clock_max_delta);
P(cpu_load[0]);
P(cpu_load[1]);
P(cpu_load[2]);
@@ -357,8 +350,8 @@
avg_per_cpu = p->se.sum_exec_runtime;
if (p->se.nr_migrations) {
- avg_per_cpu = div64_64(avg_per_cpu,
- p->se.nr_migrations);
+ avg_per_cpu = div64_u64(avg_per_cpu,
+ p->se.nr_migrations);
} else {
avg_per_cpu = -1LL;
}
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 89fa32b..e24ecd3 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -662,10 +662,15 @@
if (!initial) {
/* sleeps upto a single latency don't count. */
if (sched_feat(NEW_FAIR_SLEEPERS)) {
+ unsigned long thresh = sysctl_sched_latency;
+
+ /*
+ * convert the sleeper threshold into virtual time
+ */
if (sched_feat(NORMALIZED_SLEEPER))
- vruntime -= calc_delta_weight(sysctl_sched_latency, se);
- else
- vruntime -= sysctl_sched_latency;
+ thresh = calc_delta_fair(thresh, se);
+
+ vruntime -= thresh;
}
/* ensure we never gain time by being placed backwards. */
@@ -682,6 +687,7 @@
* Update run-time statistics of the 'current'.
*/
update_curr(cfs_rq);
+ account_entity_enqueue(cfs_rq, se);
if (wakeup) {
place_entity(cfs_rq, se, 0);
@@ -692,7 +698,6 @@
check_spread(cfs_rq, se);
if (se != cfs_rq->curr)
__enqueue_entity(cfs_rq, se);
- account_entity_enqueue(cfs_rq, se);
}
static void update_avg(u64 *avg, u64 sample)
@@ -841,8 +846,10 @@
* queued ticks are scheduled to match the slice, so don't bother
* validating it and just reschedule.
*/
- if (queued)
- return resched_task(rq_of(cfs_rq)->curr);
+ if (queued) {
+ resched_task(rq_of(cfs_rq)->curr);
+ return;
+ }
/*
* don't let the period tick interfere with the hrtick preemption
*/
@@ -957,7 +964,7 @@
return;
if (likely(!sysctl_sched_compat_yield) && curr->policy != SCHED_BATCH) {
- __update_rq_clock(rq);
+ update_rq_clock(rq);
/*
* Update run-time statistics of the 'current'.
*/
@@ -1007,7 +1014,7 @@
* sibling runqueue info. This will avoid the checks and cache miss
* penalities associated with that.
*/
- if (idle_cpu(cpu) || cpu_rq(cpu)->nr_running > 1)
+ if (idle_cpu(cpu) || cpu_rq(cpu)->cfs.nr_running > 1)
return cpu;
for_each_domain(cpu, sd) {
@@ -1611,30 +1618,6 @@
};
#ifdef CONFIG_SCHED_DEBUG
-static void
-print_cfs_rq_tasks(struct seq_file *m, struct cfs_rq *cfs_rq, int depth)
-{
- struct sched_entity *se;
-
- if (!cfs_rq)
- return;
-
- list_for_each_entry_rcu(se, &cfs_rq->tasks, group_node) {
- int i;
-
- for (i = depth; i; i--)
- seq_puts(m, " ");
-
- seq_printf(m, "%lu %s %lu\n",
- se->load.weight,
- entity_is_task(se) ? "T" : "G",
- calc_delta_weight(SCHED_LOAD_SCALE, se)
- );
- if (!entity_is_task(se))
- print_cfs_rq_tasks(m, group_cfs_rq(se), depth + 1);
- }
-}
-
static void print_cfs_stats(struct seq_file *m, int cpu)
{
struct cfs_rq *cfs_rq;
@@ -1642,9 +1625,6 @@
rcu_read_lock();
for_each_leaf_cfs_rq(cpu_rq(cpu), cfs_rq)
print_cfs_rq(m, cpu, cfs_rq);
-
- seq_printf(m, "\nWeight tree:\n");
- print_cfs_rq_tasks(m, &cpu_rq(cpu)->cfs, 1);
rcu_read_unlock();
}
#endif
diff --git a/kernel/sched_idletask.c b/kernel/sched_idletask.c
index 2bcafa37..3a4f92d 100644
--- a/kernel/sched_idletask.c
+++ b/kernel/sched_idletask.c
@@ -99,7 +99,7 @@
/*
* Simple, special scheduling class for the per-CPU idle tasks:
*/
-const struct sched_class idle_sched_class = {
+static const struct sched_class idle_sched_class = {
/* .next is NULL */
/* no enqueue/yield_task for idle tasks */
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index c2730a5..060e87b 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -1098,11 +1098,14 @@
}
}
-
+/*
+ * If we are not running and we are not going to reschedule soon, we should
+ * try to push tasks away now
+ */
static void task_wake_up_rt(struct rq *rq, struct task_struct *p)
{
if (!task_running(rq, p) &&
- (p->prio >= rq->rt.highest_prio) &&
+ !test_tsk_need_resched(rq->curr) &&
rq->rt.overloaded)
push_rt_tasks(rq);
}
@@ -1309,7 +1312,7 @@
p->se.exec_start = rq->clock;
}
-const struct sched_class rt_sched_class = {
+static const struct sched_class rt_sched_class = {
.next = &fair_sched_class,
.enqueue_task = enqueue_task_rt,
.dequeue_task = dequeue_task_rt,
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 3c44956..36e0617 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -589,16 +589,20 @@
local_irq_disable();
/* Find end, append list for that CPU. */
- *__get_cpu_var(tasklet_vec).tail = per_cpu(tasklet_vec, cpu).head;
- __get_cpu_var(tasklet_vec).tail = per_cpu(tasklet_vec, cpu).tail;
- per_cpu(tasklet_vec, cpu).head = NULL;
- per_cpu(tasklet_vec, cpu).tail = &per_cpu(tasklet_vec, cpu).head;
+ if (&per_cpu(tasklet_vec, cpu).head != per_cpu(tasklet_vec, cpu).tail) {
+ *(__get_cpu_var(tasklet_vec).tail) = per_cpu(tasklet_vec, cpu).head;
+ __get_cpu_var(tasklet_vec).tail = per_cpu(tasklet_vec, cpu).tail;
+ per_cpu(tasklet_vec, cpu).head = NULL;
+ per_cpu(tasklet_vec, cpu).tail = &per_cpu(tasklet_vec, cpu).head;
+ }
raise_softirq_irqoff(TASKLET_SOFTIRQ);
- *__get_cpu_var(tasklet_hi_vec).tail = per_cpu(tasklet_hi_vec, cpu).head;
- __get_cpu_var(tasklet_hi_vec).tail = per_cpu(tasklet_hi_vec, cpu).tail;
- per_cpu(tasklet_hi_vec, cpu).head = NULL;
- per_cpu(tasklet_hi_vec, cpu).tail = &per_cpu(tasklet_hi_vec, cpu).head;
+ if (&per_cpu(tasklet_hi_vec, cpu).head != per_cpu(tasklet_hi_vec, cpu).tail) {
+ *__get_cpu_var(tasklet_hi_vec).tail = per_cpu(tasklet_hi_vec, cpu).head;
+ __get_cpu_var(tasklet_hi_vec).tail = per_cpu(tasklet_hi_vec, cpu).tail;
+ per_cpu(tasklet_hi_vec, cpu).head = NULL;
+ per_cpu(tasklet_hi_vec, cpu).tail = &per_cpu(tasklet_hi_vec, cpu).head;
+ }
raise_softirq_irqoff(HI_SOFTIRQ);
local_irq_enable();
diff --git a/kernel/time.c b/kernel/time.c
index 8672904..6a08660 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -36,6 +36,7 @@
#include <linux/security.h>
#include <linux/fs.h>
#include <linux/slab.h>
+#include <linux/math64.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
@@ -245,7 +246,7 @@
return (j + (HZ / MSEC_PER_SEC) - 1)/(HZ / MSEC_PER_SEC);
#else
# if BITS_PER_LONG == 32
- return ((u64)HZ_TO_MSEC_MUL32 * j) >> HZ_TO_MSEC_SHR32;
+ return (HZ_TO_MSEC_MUL32 * j) >> HZ_TO_MSEC_SHR32;
# else
return (j * HZ_TO_MSEC_NUM) / HZ_TO_MSEC_DEN;
# endif
@@ -261,7 +262,7 @@
return (j + (HZ / USEC_PER_SEC) - 1)/(HZ / USEC_PER_SEC);
#else
# if BITS_PER_LONG == 32
- return ((u64)HZ_TO_USEC_MUL32 * j) >> HZ_TO_USEC_SHR32;
+ return (HZ_TO_USEC_MUL32 * j) >> HZ_TO_USEC_SHR32;
# else
return (j * HZ_TO_USEC_NUM) / HZ_TO_USEC_DEN;
# endif
@@ -391,13 +392,17 @@
struct timespec ns_to_timespec(const s64 nsec)
{
struct timespec ts;
+ s32 rem;
if (!nsec)
return (struct timespec) {0, 0};
- ts.tv_sec = div_long_long_rem_signed(nsec, NSEC_PER_SEC, &ts.tv_nsec);
- if (unlikely(nsec < 0))
- set_normalized_timespec(&ts, ts.tv_sec, ts.tv_nsec);
+ ts.tv_sec = div_s64_rem(nsec, NSEC_PER_SEC, &rem);
+ if (unlikely(rem < 0)) {
+ ts.tv_sec--;
+ rem += NSEC_PER_SEC;
+ }
+ ts.tv_nsec = rem;
return ts;
}
@@ -471,7 +476,7 @@
if (HZ > MSEC_PER_SEC && m > jiffies_to_msecs(MAX_JIFFY_OFFSET))
return MAX_JIFFY_OFFSET;
- return ((u64)MSEC_TO_HZ_MUL32 * m + MSEC_TO_HZ_ADJ32)
+ return (MSEC_TO_HZ_MUL32 * m + MSEC_TO_HZ_ADJ32)
>> MSEC_TO_HZ_SHR32;
#endif
}
@@ -486,7 +491,7 @@
#elif HZ > USEC_PER_SEC && !(HZ % USEC_PER_SEC)
return u * (HZ / USEC_PER_SEC);
#else
- return ((u64)USEC_TO_HZ_MUL32 * u + USEC_TO_HZ_ADJ32)
+ return (USEC_TO_HZ_MUL32 * u + USEC_TO_HZ_ADJ32)
>> USEC_TO_HZ_SHR32;
#endif
}
@@ -527,8 +532,10 @@
* Convert jiffies to nanoseconds and separate with
* one divide.
*/
- u64 nsec = (u64)jiffies * TICK_NSEC;
- value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &value->tv_nsec);
+ u32 rem;
+ value->tv_sec = div_u64_rem((u64)jiffies * TICK_NSEC,
+ NSEC_PER_SEC, &rem);
+ value->tv_nsec = rem;
}
EXPORT_SYMBOL(jiffies_to_timespec);
@@ -566,12 +573,11 @@
* Convert jiffies to nanoseconds and separate with
* one divide.
*/
- u64 nsec = (u64)jiffies * TICK_NSEC;
- long tv_usec;
+ u32 rem;
- value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &tv_usec);
- tv_usec /= NSEC_PER_USEC;
- value->tv_usec = tv_usec;
+ value->tv_sec = div_u64_rem((u64)jiffies * TICK_NSEC,
+ NSEC_PER_SEC, &rem);
+ value->tv_usec = rem / NSEC_PER_USEC;
}
EXPORT_SYMBOL(jiffies_to_timeval);
@@ -587,9 +593,7 @@
return x / (HZ / USER_HZ);
# endif
#else
- u64 tmp = (u64)x * TICK_NSEC;
- do_div(tmp, (NSEC_PER_SEC / USER_HZ));
- return (long)tmp;
+ return div_u64((u64)x * TICK_NSEC, NSEC_PER_SEC / USER_HZ);
#endif
}
EXPORT_SYMBOL(jiffies_to_clock_t);
@@ -601,16 +605,12 @@
return ~0UL;
return x * (HZ / USER_HZ);
#else
- u64 jif;
-
/* Don't worry about loss of precision here .. */
if (x >= ~0UL / HZ * USER_HZ)
return ~0UL;
/* .. but do try to contain it here */
- jif = x * (u64) HZ;
- do_div(jif, USER_HZ);
- return jif;
+ return div_u64((u64)x * HZ, USER_HZ);
#endif
}
EXPORT_SYMBOL(clock_t_to_jiffies);
@@ -619,10 +619,9 @@
{
#if (TICK_NSEC % (NSEC_PER_SEC / USER_HZ)) == 0
# if HZ < USER_HZ
- x *= USER_HZ;
- do_div(x, HZ);
+ x = div_u64(x * USER_HZ, HZ);
# elif HZ > USER_HZ
- do_div(x, HZ / USER_HZ);
+ x = div_u64(x, HZ / USER_HZ);
# else
/* Nothing to do */
# endif
@@ -632,8 +631,7 @@
* but even this doesn't overflow in hundreds of years
* in 64 bits, so..
*/
- x *= TICK_NSEC;
- do_div(x, (NSEC_PER_SEC / USER_HZ));
+ x = div_u64(x * TICK_NSEC, (NSEC_PER_SEC / USER_HZ));
#endif
return x;
}
@@ -642,21 +640,17 @@
u64 nsec_to_clock_t(u64 x)
{
#if (NSEC_PER_SEC % USER_HZ) == 0
- do_div(x, (NSEC_PER_SEC / USER_HZ));
+ return div_u64(x, NSEC_PER_SEC / USER_HZ);
#elif (USER_HZ % 512) == 0
- x *= USER_HZ/512;
- do_div(x, (NSEC_PER_SEC / 512));
+ return div_u64(x * USER_HZ / 512, NSEC_PER_SEC / 512);
#else
/*
* max relative error 5.7e-8 (1.8s per year) for USER_HZ <= 1024,
* overflow after 64.99 years.
* exact for HZ=60, 72, 90, 120, 144, 180, 300, 600, 900, ...
*/
- x *= 9;
- do_div(x, (unsigned long)((9ull * NSEC_PER_SEC + (USER_HZ/2)) /
- USER_HZ));
+ return div_u64(x * 9, (9ull * NSEC_PER_SEC + (USER_HZ / 2)) / USER_HZ);
#endif
- return x;
}
#if (BITS_PER_LONG < 64)
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 73961f3..dadde53 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -471,10 +471,10 @@
/*
* Sysfs setup bits:
*/
-static SYSDEV_ATTR(current_clocksource, 0600, sysfs_show_current_clocksources,
+static SYSDEV_ATTR(current_clocksource, 0644, sysfs_show_current_clocksources,
sysfs_override_clocksource);
-static SYSDEV_ATTR(available_clocksource, 0600,
+static SYSDEV_ATTR(available_clocksource, 0444,
sysfs_show_available_clocksources, NULL);
static struct sysdev_class clocksource_sysclass = {
diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index 5fd9b94..5125ddd 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -15,7 +15,8 @@
#include <linux/jiffies.h>
#include <linux/hrtimer.h>
#include <linux/capability.h>
-#include <asm/div64.h>
+#include <linux/math64.h>
+#include <linux/clocksource.h>
#include <asm/timex.h>
/*
@@ -23,11 +24,14 @@
*/
unsigned long tick_usec = TICK_USEC; /* USER_HZ period (usec) */
unsigned long tick_nsec; /* ACTHZ period (nsec) */
-static u64 tick_length, tick_length_base;
+u64 tick_length;
+static u64 tick_length_base;
+
+static struct hrtimer leap_timer;
#define MAX_TICKADJ 500 /* microsecs */
#define MAX_TICKADJ_SCALED (((u64)(MAX_TICKADJ * NSEC_PER_USEC) << \
- TICK_LENGTH_SHIFT) / NTP_INTERVAL_FREQ)
+ NTP_SCALE_SHIFT) / NTP_INTERVAL_FREQ)
/*
* phase-lock loop variables
@@ -35,11 +39,12 @@
/* TIME_ERROR prevents overwriting the CMOS clock */
static int time_state = TIME_OK; /* clock synchronization status */
int time_status = STA_UNSYNC; /* clock status bits */
-static s64 time_offset; /* time adjustment (ns) */
+static long time_tai; /* TAI offset (s) */
+static s64 time_offset; /* time adjustment (ns) */
static long time_constant = 2; /* pll time constant */
long time_maxerror = NTP_PHASE_LIMIT; /* maximum error (us) */
long time_esterror = NTP_PHASE_LIMIT; /* estimated error (us) */
-long time_freq; /* frequency offset (scaled ppm)*/
+static s64 time_freq; /* frequency offset (scaled ns/s)*/
static long time_reftime; /* time at last adjustment (s) */
long time_adjust;
static long ntp_tick_adj;
@@ -47,16 +52,56 @@
static void ntp_update_frequency(void)
{
u64 second_length = (u64)(tick_usec * NSEC_PER_USEC * USER_HZ)
- << TICK_LENGTH_SHIFT;
- second_length += (s64)ntp_tick_adj << TICK_LENGTH_SHIFT;
- second_length += (s64)time_freq << (TICK_LENGTH_SHIFT - SHIFT_NSEC);
+ << NTP_SCALE_SHIFT;
+ second_length += (s64)ntp_tick_adj << NTP_SCALE_SHIFT;
+ second_length += time_freq;
tick_length_base = second_length;
- do_div(second_length, HZ);
- tick_nsec = second_length >> TICK_LENGTH_SHIFT;
+ tick_nsec = div_u64(second_length, HZ) >> NTP_SCALE_SHIFT;
+ tick_length_base = div_u64(tick_length_base, NTP_INTERVAL_FREQ);
+}
- do_div(tick_length_base, NTP_INTERVAL_FREQ);
+static void ntp_update_offset(long offset)
+{
+ long mtemp;
+ s64 freq_adj;
+
+ if (!(time_status & STA_PLL))
+ return;
+
+ if (!(time_status & STA_NANO))
+ offset *= NSEC_PER_USEC;
+
+ /*
+ * Scale the phase adjustment and
+ * clamp to the operating range.
+ */
+ offset = min(offset, MAXPHASE);
+ offset = max(offset, -MAXPHASE);
+
+ /*
+ * Select how the frequency is to be controlled
+ * and in which mode (PLL or FLL).
+ */
+ if (time_status & STA_FREQHOLD || time_reftime == 0)
+ time_reftime = xtime.tv_sec;
+ mtemp = xtime.tv_sec - time_reftime;
+ time_reftime = xtime.tv_sec;
+
+ freq_adj = (s64)offset * mtemp;
+ freq_adj <<= NTP_SCALE_SHIFT - 2 * (SHIFT_PLL + 2 + time_constant);
+ time_status &= ~STA_MODE;
+ if (mtemp >= MINSEC && (time_status & STA_FLL || mtemp > MAXSEC)) {
+ freq_adj += div_s64((s64)offset << (NTP_SCALE_SHIFT - SHIFT_FLL),
+ mtemp);
+ time_status |= STA_MODE;
+ }
+ freq_adj += time_freq;
+ freq_adj = min(freq_adj, MAXFREQ_SCALED);
+ time_freq = max(freq_adj, -MAXFREQ_SCALED);
+
+ time_offset = div_s64((s64)offset << NTP_SCALE_SHIFT, NTP_INTERVAL_FREQ);
}
/**
@@ -78,6 +123,54 @@
}
/*
+ * Leap second processing. If in leap-insert state at the end of the
+ * day, the system clock is set back one second; if in leap-delete
+ * state, the system clock is set ahead one second.
+ */
+static enum hrtimer_restart ntp_leap_second(struct hrtimer *timer)
+{
+ enum hrtimer_restart res = HRTIMER_NORESTART;
+
+ write_seqlock_irq(&xtime_lock);
+
+ switch (time_state) {
+ case TIME_OK:
+ break;
+ case TIME_INS:
+ xtime.tv_sec--;
+ wall_to_monotonic.tv_sec++;
+ time_state = TIME_OOP;
+ printk(KERN_NOTICE "Clock: "
+ "inserting leap second 23:59:60 UTC\n");
+ leap_timer.expires = ktime_add_ns(leap_timer.expires,
+ NSEC_PER_SEC);
+ res = HRTIMER_RESTART;
+ break;
+ case TIME_DEL:
+ xtime.tv_sec++;
+ time_tai--;
+ wall_to_monotonic.tv_sec--;
+ time_state = TIME_WAIT;
+ printk(KERN_NOTICE "Clock: "
+ "deleting leap second 23:59:59 UTC\n");
+ break;
+ case TIME_OOP:
+ time_tai++;
+ time_state = TIME_WAIT;
+ /* fall through */
+ case TIME_WAIT:
+ if (!(time_status & (STA_INS | STA_DEL)))
+ time_state = TIME_OK;
+ break;
+ }
+ update_vsyscall(&xtime, clock);
+
+ write_sequnlock_irq(&xtime_lock);
+
+ return res;
+}
+
+/*
* this routine handles the overflow of the microsecond field
*
* The tricky bits of code to handle the accurate clock support
@@ -87,63 +180,23 @@
*/
void second_overflow(void)
{
- long time_adj;
+ s64 time_adj;
/* Bump the maxerror field */
- time_maxerror += MAXFREQ >> SHIFT_USEC;
+ time_maxerror += MAXFREQ / NSEC_PER_USEC;
if (time_maxerror > NTP_PHASE_LIMIT) {
time_maxerror = NTP_PHASE_LIMIT;
time_status |= STA_UNSYNC;
}
/*
- * Leap second processing. If in leap-insert state at the end of the
- * day, the system clock is set back one second; if in leap-delete
- * state, the system clock is set ahead one second. The microtime()
- * routine or external clock driver will insure that reported time is
- * always monotonic. The ugly divides should be replaced.
- */
- switch (time_state) {
- case TIME_OK:
- if (time_status & STA_INS)
- time_state = TIME_INS;
- else if (time_status & STA_DEL)
- time_state = TIME_DEL;
- break;
- case TIME_INS:
- if (xtime.tv_sec % 86400 == 0) {
- xtime.tv_sec--;
- wall_to_monotonic.tv_sec++;
- time_state = TIME_OOP;
- printk(KERN_NOTICE "Clock: inserting leap second "
- "23:59:60 UTC\n");
- }
- break;
- case TIME_DEL:
- if ((xtime.tv_sec + 1) % 86400 == 0) {
- xtime.tv_sec++;
- wall_to_monotonic.tv_sec--;
- time_state = TIME_WAIT;
- printk(KERN_NOTICE "Clock: deleting leap second "
- "23:59:59 UTC\n");
- }
- break;
- case TIME_OOP:
- time_state = TIME_WAIT;
- break;
- case TIME_WAIT:
- if (!(time_status & (STA_INS | STA_DEL)))
- time_state = TIME_OK;
- }
-
- /*
* Compute the phase adjustment for the next second. The offset is
* reduced by a fixed factor times the time constant.
*/
tick_length = tick_length_base;
time_adj = shift_right(time_offset, SHIFT_PLL + time_constant);
time_offset -= time_adj;
- tick_length += (s64)time_adj << (TICK_LENGTH_SHIFT - SHIFT_UPDATE);
+ tick_length += time_adj;
if (unlikely(time_adjust)) {
if (time_adjust > MAX_TICKADJ) {
@@ -154,25 +207,12 @@
tick_length -= MAX_TICKADJ_SCALED;
} else {
tick_length += (s64)(time_adjust * NSEC_PER_USEC /
- NTP_INTERVAL_FREQ) << TICK_LENGTH_SHIFT;
+ NTP_INTERVAL_FREQ) << NTP_SCALE_SHIFT;
time_adjust = 0;
}
}
}
-/*
- * Return how long ticks are at the moment, that is, how much time
- * update_wall_time_one_tick will add to xtime next time we call it
- * (assuming no calls to do_adjtimex in the meantime).
- * The return value is in fixed-point nanoseconds shifted by the
- * specified number of bits to the right of the binary point.
- * This function has no side-effects.
- */
-u64 current_tick_length(void)
-{
- return tick_length;
-}
-
#ifdef CONFIG_GENERIC_CMOS_UPDATE
/* Disable the cmos update - used by virtualization and embedded */
@@ -236,8 +276,8 @@
*/
int do_adjtimex(struct timex *txc)
{
- long mtemp, save_adjust, rem;
- s64 freq_adj, temp64;
+ struct timespec ts;
+ long save_adjust, sec;
int result;
/* In order to modify anything, you gotta be super-user! */
@@ -247,147 +287,132 @@
/* Now we validate the data before disabling interrupts */
if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT) {
- /* singleshot must not be used with any other mode bits */
- if (txc->modes != ADJ_OFFSET_SINGLESHOT &&
- txc->modes != ADJ_OFFSET_SS_READ)
+ /* singleshot must not be used with any other mode bits */
+ if (txc->modes & ~ADJ_OFFSET_SS_READ)
return -EINVAL;
}
- if (txc->modes != ADJ_OFFSET_SINGLESHOT && (txc->modes & ADJ_OFFSET))
- /* adjustment Offset limited to +- .512 seconds */
- if (txc->offset <= - MAXPHASE || txc->offset >= MAXPHASE )
- return -EINVAL;
-
/* if the quartz is off by more than 10% something is VERY wrong ! */
if (txc->modes & ADJ_TICK)
if (txc->tick < 900000/USER_HZ ||
txc->tick > 1100000/USER_HZ)
return -EINVAL;
+ if (time_state != TIME_OK && txc->modes & ADJ_STATUS)
+ hrtimer_cancel(&leap_timer);
+ getnstimeofday(&ts);
+
write_seqlock_irq(&xtime_lock);
- result = time_state; /* mostly `TIME_OK' */
/* Save for later - semantics of adjtime is to return old value */
save_adjust = time_adjust;
-#if 0 /* STA_CLOCKERR is never set yet */
- time_status &= ~STA_CLOCKERR; /* reset STA_CLOCKERR */
-#endif
/* If there are input parameters, then process them */
- if (txc->modes)
- {
- if (txc->modes & ADJ_STATUS) /* only set allowed bits */
- time_status = (txc->status & ~STA_RONLY) |
- (time_status & STA_RONLY);
-
- if (txc->modes & ADJ_FREQUENCY) { /* p. 22 */
- if (txc->freq > MAXFREQ || txc->freq < -MAXFREQ) {
- result = -EINVAL;
- goto leave;
- }
- time_freq = ((s64)txc->freq * NSEC_PER_USEC)
- >> (SHIFT_USEC - SHIFT_NSEC);
- }
-
- if (txc->modes & ADJ_MAXERROR) {
- if (txc->maxerror < 0 || txc->maxerror >= NTP_PHASE_LIMIT) {
- result = -EINVAL;
- goto leave;
- }
- time_maxerror = txc->maxerror;
- }
-
- if (txc->modes & ADJ_ESTERROR) {
- if (txc->esterror < 0 || txc->esterror >= NTP_PHASE_LIMIT) {
- result = -EINVAL;
- goto leave;
- }
- time_esterror = txc->esterror;
- }
-
- if (txc->modes & ADJ_TIMECONST) { /* p. 24 */
- if (txc->constant < 0) { /* NTP v4 uses values > 6 */
- result = -EINVAL;
- goto leave;
- }
- time_constant = min(txc->constant + 4, (long)MAXTC);
- }
-
- if (txc->modes & ADJ_OFFSET) { /* values checked earlier */
- if (txc->modes == ADJ_OFFSET_SINGLESHOT) {
- /* adjtime() is independent from ntp_adjtime() */
- time_adjust = txc->offset;
- }
- else if (time_status & STA_PLL) {
- time_offset = txc->offset * NSEC_PER_USEC;
-
- /*
- * Scale the phase adjustment and
- * clamp to the operating range.
- */
- time_offset = min(time_offset, (s64)MAXPHASE * NSEC_PER_USEC);
- time_offset = max(time_offset, (s64)-MAXPHASE * NSEC_PER_USEC);
-
- /*
- * Select whether the frequency is to be controlled
- * and in which mode (PLL or FLL). Clamp to the operating
- * range. Ugly multiply/divide should be replaced someday.
- */
-
- if (time_status & STA_FREQHOLD || time_reftime == 0)
- time_reftime = xtime.tv_sec;
- mtemp = xtime.tv_sec - time_reftime;
- time_reftime = xtime.tv_sec;
-
- freq_adj = time_offset * mtemp;
- freq_adj = shift_right(freq_adj, time_constant * 2 +
- (SHIFT_PLL + 2) * 2 - SHIFT_NSEC);
- if (mtemp >= MINSEC && (time_status & STA_FLL || mtemp > MAXSEC)) {
- u64 utemp64;
- temp64 = time_offset << (SHIFT_NSEC - SHIFT_FLL);
- if (time_offset < 0) {
- utemp64 = -temp64;
- do_div(utemp64, mtemp);
- freq_adj -= utemp64;
- } else {
- utemp64 = temp64;
- do_div(utemp64, mtemp);
- freq_adj += utemp64;
+ if (txc->modes) {
+ if (txc->modes & ADJ_STATUS) {
+ if ((time_status & STA_PLL) &&
+ !(txc->status & STA_PLL)) {
+ time_state = TIME_OK;
+ time_status = STA_UNSYNC;
}
- }
- freq_adj += time_freq;
- freq_adj = min(freq_adj, (s64)MAXFREQ_NSEC);
- time_freq = max(freq_adj, (s64)-MAXFREQ_NSEC);
- time_offset = div_long_long_rem_signed(time_offset,
- NTP_INTERVAL_FREQ,
- &rem);
- time_offset <<= SHIFT_UPDATE;
- } /* STA_PLL */
- } /* txc->modes & ADJ_OFFSET */
- if (txc->modes & ADJ_TICK)
- tick_usec = txc->tick;
+ /* only set allowed bits */
+ time_status &= STA_RONLY;
+ time_status |= txc->status & ~STA_RONLY;
- if (txc->modes & (ADJ_TICK|ADJ_FREQUENCY|ADJ_OFFSET))
- ntp_update_frequency();
- } /* txc->modes */
-leave: if ((time_status & (STA_UNSYNC|STA_CLOCKERR)) != 0)
+ switch (time_state) {
+ case TIME_OK:
+ start_timer:
+ sec = ts.tv_sec;
+ if (time_status & STA_INS) {
+ time_state = TIME_INS;
+ sec += 86400 - sec % 86400;
+ hrtimer_start(&leap_timer, ktime_set(sec, 0), HRTIMER_MODE_ABS);
+ } else if (time_status & STA_DEL) {
+ time_state = TIME_DEL;
+ sec += 86400 - (sec + 1) % 86400;
+ hrtimer_start(&leap_timer, ktime_set(sec, 0), HRTIMER_MODE_ABS);
+ }
+ break;
+ case TIME_INS:
+ case TIME_DEL:
+ time_state = TIME_OK;
+ goto start_timer;
+ break;
+ case TIME_WAIT:
+ if (!(time_status & (STA_INS | STA_DEL)))
+ time_state = TIME_OK;
+ break;
+ case TIME_OOP:
+ hrtimer_restart(&leap_timer);
+ break;
+ }
+ }
+
+ if (txc->modes & ADJ_NANO)
+ time_status |= STA_NANO;
+ if (txc->modes & ADJ_MICRO)
+ time_status &= ~STA_NANO;
+
+ if (txc->modes & ADJ_FREQUENCY) {
+ time_freq = (s64)txc->freq * PPM_SCALE;
+ time_freq = min(time_freq, MAXFREQ_SCALED);
+ time_freq = max(time_freq, -MAXFREQ_SCALED);
+ }
+
+ if (txc->modes & ADJ_MAXERROR)
+ time_maxerror = txc->maxerror;
+ if (txc->modes & ADJ_ESTERROR)
+ time_esterror = txc->esterror;
+
+ if (txc->modes & ADJ_TIMECONST) {
+ time_constant = txc->constant;
+ if (!(time_status & STA_NANO))
+ time_constant += 4;
+ time_constant = min(time_constant, (long)MAXTC);
+ time_constant = max(time_constant, 0l);
+ }
+
+ if (txc->modes & ADJ_TAI && txc->constant > 0)
+ time_tai = txc->constant;
+
+ if (txc->modes & ADJ_OFFSET) {
+ if (txc->modes == ADJ_OFFSET_SINGLESHOT)
+ /* adjtime() is independent from ntp_adjtime() */
+ time_adjust = txc->offset;
+ else
+ ntp_update_offset(txc->offset);
+ }
+ if (txc->modes & ADJ_TICK)
+ tick_usec = txc->tick;
+
+ if (txc->modes & (ADJ_TICK|ADJ_FREQUENCY|ADJ_OFFSET))
+ ntp_update_frequency();
+ }
+
+ result = time_state; /* mostly `TIME_OK' */
+ if (time_status & (STA_UNSYNC|STA_CLOCKERR))
result = TIME_ERROR;
if ((txc->modes == ADJ_OFFSET_SINGLESHOT) ||
- (txc->modes == ADJ_OFFSET_SS_READ))
+ (txc->modes == ADJ_OFFSET_SS_READ))
txc->offset = save_adjust;
- else
- txc->offset = ((long)shift_right(time_offset, SHIFT_UPDATE)) *
- NTP_INTERVAL_FREQ / 1000;
- txc->freq = (time_freq / NSEC_PER_USEC) <<
- (SHIFT_USEC - SHIFT_NSEC);
+ else {
+ txc->offset = shift_right(time_offset * NTP_INTERVAL_FREQ,
+ NTP_SCALE_SHIFT);
+ if (!(time_status & STA_NANO))
+ txc->offset /= NSEC_PER_USEC;
+ }
+ txc->freq = shift_right((s32)(time_freq >> PPM_SCALE_INV_SHIFT) *
+ (s64)PPM_SCALE_INV,
+ NTP_SCALE_SHIFT);
txc->maxerror = time_maxerror;
txc->esterror = time_esterror;
txc->status = time_status;
txc->constant = time_constant;
txc->precision = 1;
- txc->tolerance = MAXFREQ;
+ txc->tolerance = MAXFREQ_SCALED / PPM_SCALE;
txc->tick = tick_usec;
+ txc->tai = time_tai;
/* PPS is not implemented, so these are zero */
txc->ppsfreq = 0;
@@ -399,9 +424,15 @@
txc->errcnt = 0;
txc->stbcnt = 0;
write_sequnlock_irq(&xtime_lock);
- do_gettimeofday(&txc->time);
+
+ txc->time.tv_sec = ts.tv_sec;
+ txc->time.tv_usec = ts.tv_nsec;
+ if (!(time_status & STA_NANO))
+ txc->time.tv_usec /= NSEC_PER_USEC;
+
notify_cmos_timer();
- return(result);
+
+ return result;
}
static int __init ntp_tick_adj_setup(char *str)
@@ -411,3 +442,10 @@
}
__setup("ntp_tick_adj=", ntp_tick_adj_setup);
+
+void __init ntp_init(void)
+{
+ ntp_clear();
+ hrtimer_init(&leap_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
+ leap_timer.function = ntp_leap_second;
+}
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 2d6087c..e91c29f 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -53,7 +53,7 @@
timespec_add_ns(&xtime_cache, nsec);
}
-static struct clocksource *clock; /* pointer to current clocksource */
+struct clocksource *clock;
#ifdef CONFIG_GENERIC_TIME
@@ -246,7 +246,7 @@
write_seqlock_irqsave(&xtime_lock, flags);
- ntp_clear();
+ ntp_init();
clock = clocksource_get_next();
clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
@@ -371,7 +371,7 @@
* here. This is tuned so that an error of about 1 msec is adjusted
* within about 1 sec (or 2^20 nsec in 2^SHIFT_HZ ticks).
*/
- error2 = clock->error >> (TICK_LENGTH_SHIFT + 22 - 2 * SHIFT_HZ);
+ error2 = clock->error >> (NTP_SCALE_SHIFT + 22 - 2 * SHIFT_HZ);
error2 = abs(error2);
for (look_ahead = 0; error2 > 0; look_ahead++)
error2 >>= 2;
@@ -380,8 +380,7 @@
* Now calculate the error in (1 << look_ahead) ticks, but first
* remove the single look ahead already included in the error.
*/
- tick_error = current_tick_length() >>
- (TICK_LENGTH_SHIFT - clock->shift + 1);
+ tick_error = tick_length >> (NTP_SCALE_SHIFT - clock->shift + 1);
tick_error -= clock->xtime_interval >> 1;
error = ((error - tick_error) >> look_ahead) + tick_error;
@@ -412,7 +411,7 @@
s64 error, interval = clock->cycle_interval;
int adj;
- error = clock->error >> (TICK_LENGTH_SHIFT - clock->shift - 1);
+ error = clock->error >> (NTP_SCALE_SHIFT - clock->shift - 1);
if (error > interval) {
error >>= 2;
if (likely(error <= interval))
@@ -434,7 +433,7 @@
clock->xtime_interval += interval;
clock->xtime_nsec -= offset;
clock->error -= (interval - offset) <<
- (TICK_LENGTH_SHIFT - clock->shift);
+ (NTP_SCALE_SHIFT - clock->shift);
}
/**
@@ -473,8 +472,8 @@
}
/* accumulate error between NTP and clock interval */
- clock->error += current_tick_length();
- clock->error -= clock->xtime_interval << (TICK_LENGTH_SHIFT - clock->shift);
+ clock->error += tick_length;
+ clock->error -= clock->xtime_interval << (NTP_SCALE_SHIFT - clock->shift);
}
/* correct the clock when NTP error is too big */
diff --git a/kernel/timeconst.pl b/kernel/timeconst.pl
index 4146803..eb51d76 100644
--- a/kernel/timeconst.pl
+++ b/kernel/timeconst.pl
@@ -1,7 +1,7 @@
#!/usr/bin/perl
# -----------------------------------------------------------------------
#
-# Copyright 2007 rPath, Inc. - All Rights Reserved
+# Copyright 2007-2008 rPath, Inc. - All Rights Reserved
#
# This file is part of the Linux kernel, and is made available under
# the terms of the GNU General Public License version 2 or (at your
@@ -20,198 +20,138 @@
%canned_values = (
24 => [
'0xa6aaaaab','0x2aaaaaa',26,
- '0xa6aaaaaaaaaaaaab','0x2aaaaaaaaaaaaaa',58,
125,3,
'0xc49ba5e4','0x1fbe76c8b4',37,
- '0xc49ba5e353f7ceda','0x1fbe76c8b439581062',69,
3,125,
'0xa2c2aaab','0xaaaa',16,
- '0xa2c2aaaaaaaaaaab','0xaaaaaaaaaaaa',48,
125000,3,
'0xc9539b89','0x7fffbce4217d',47,
- '0xc9539b8887229e91','0x7fffbce4217d2849cb25',79,
3,125000,
], 32 => [
'0xfa000000','0x6000000',27,
- '0xfa00000000000000','0x600000000000000',59,
125,4,
'0x83126e98','0xfdf3b645a',36,
- '0x83126e978d4fdf3c','0xfdf3b645a1cac0831',68,
4,125,
'0xf4240000','0x0',17,
- '0xf424000000000000','0x0',49,
31250,1,
'0x8637bd06','0x3fff79c842fa',46,
- '0x8637bd05af6c69b6','0x3fff79c842fa5093964a',78,
1,31250,
], 48 => [
'0xa6aaaaab','0x6aaaaaa',27,
- '0xa6aaaaaaaaaaaaab','0x6aaaaaaaaaaaaaa',59,
125,6,
'0xc49ba5e4','0xfdf3b645a',36,
- '0xc49ba5e353f7ceda','0xfdf3b645a1cac0831',68,
6,125,
'0xa2c2aaab','0x15555',17,
- '0xa2c2aaaaaaaaaaab','0x1555555555555',49,
62500,3,
'0xc9539b89','0x3fffbce4217d',46,
- '0xc9539b8887229e91','0x3fffbce4217d2849cb25',78,
3,62500,
], 64 => [
'0xfa000000','0xe000000',28,
- '0xfa00000000000000','0xe00000000000000',60,
125,8,
'0x83126e98','0x7ef9db22d',35,
- '0x83126e978d4fdf3c','0x7ef9db22d0e560418',67,
8,125,
'0xf4240000','0x0',18,
- '0xf424000000000000','0x0',50,
15625,1,
'0x8637bd06','0x1fff79c842fa',45,
- '0x8637bd05af6c69b6','0x1fff79c842fa5093964a',77,
1,15625,
], 100 => [
'0xa0000000','0x0',28,
- '0xa000000000000000','0x0',60,
10,1,
'0xcccccccd','0x733333333',35,
- '0xcccccccccccccccd','0x73333333333333333',67,
1,10,
'0x9c400000','0x0',18,
- '0x9c40000000000000','0x0',50,
10000,1,
'0xd1b71759','0x1fff2e48e8a7',45,
- '0xd1b71758e219652c','0x1fff2e48e8a71de69ad4',77,
1,10000,
], 122 => [
'0x8325c53f','0xfbcda3a',28,
- '0x8325c53ef368eb05','0xfbcda3ac10c9714',60,
500,61,
'0xf9db22d1','0x7fbe76c8b',35,
- '0xf9db22d0e560418a','0x7fbe76c8b43958106',67,
61,500,
'0x8012e2a0','0x3ef36',18,
- '0x8012e29f79b47583','0x3ef368eb04325',50,
500000,61,
'0xffda4053','0x1ffffbce4217',45,
- '0xffda4052d666a983','0x1ffffbce4217d2849cb2',77,
61,500000,
], 128 => [
'0xfa000000','0x1e000000',29,
- '0xfa00000000000000','0x1e00000000000000',61,
125,16,
'0x83126e98','0x3f7ced916',34,
- '0x83126e978d4fdf3c','0x3f7ced916872b020c',66,
16,125,
'0xf4240000','0x40000',19,
- '0xf424000000000000','0x4000000000000',51,
15625,2,
'0x8637bd06','0xfffbce4217d',44,
- '0x8637bd05af6c69b6','0xfffbce4217d2849cb25',76,
2,15625,
], 200 => [
'0xa0000000','0x0',29,
- '0xa000000000000000','0x0',61,
5,1,
'0xcccccccd','0x333333333',34,
- '0xcccccccccccccccd','0x33333333333333333',66,
1,5,
'0x9c400000','0x0',19,
- '0x9c40000000000000','0x0',51,
5000,1,
'0xd1b71759','0xfff2e48e8a7',44,
- '0xd1b71758e219652c','0xfff2e48e8a71de69ad4',76,
1,5000,
], 250 => [
'0x80000000','0x0',29,
- '0x8000000000000000','0x0',61,
4,1,
'0x80000000','0x180000000',33,
- '0x8000000000000000','0x18000000000000000',65,
1,4,
'0xfa000000','0x0',20,
- '0xfa00000000000000','0x0',52,
4000,1,
'0x83126e98','0x7ff7ced9168',43,
- '0x83126e978d4fdf3c','0x7ff7ced916872b020c4',75,
1,4000,
], 256 => [
'0xfa000000','0x3e000000',30,
- '0xfa00000000000000','0x3e00000000000000',62,
125,32,
'0x83126e98','0x1fbe76c8b',33,
- '0x83126e978d4fdf3c','0x1fbe76c8b43958106',65,
32,125,
'0xf4240000','0xc0000',20,
- '0xf424000000000000','0xc000000000000',52,
15625,4,
'0x8637bd06','0x7ffde7210be',43,
- '0x8637bd05af6c69b6','0x7ffde7210be9424e592',75,
4,15625,
], 300 => [
'0xd5555556','0x2aaaaaaa',30,
- '0xd555555555555556','0x2aaaaaaaaaaaaaaa',62,
10,3,
'0x9999999a','0x1cccccccc',33,
- '0x999999999999999a','0x1cccccccccccccccc',65,
3,10,
'0xd0555556','0xaaaaa',20,
- '0xd055555555555556','0xaaaaaaaaaaaaa',52,
10000,3,
'0x9d495183','0x7ffcb923a29',43,
- '0x9d495182a9930be1','0x7ffcb923a29c779a6b5',75,
3,10000,
], 512 => [
'0xfa000000','0x7e000000',31,
- '0xfa00000000000000','0x7e00000000000000',63,
125,64,
'0x83126e98','0xfdf3b645',32,
- '0x83126e978d4fdf3c','0xfdf3b645a1cac083',64,
64,125,
'0xf4240000','0x1c0000',21,
- '0xf424000000000000','0x1c000000000000',53,
15625,8,
'0x8637bd06','0x3ffef39085f',42,
- '0x8637bd05af6c69b6','0x3ffef39085f4a1272c9',74,
8,15625,
], 1000 => [
'0x80000000','0x0',31,
- '0x8000000000000000','0x0',63,
1,1,
'0x80000000','0x0',31,
- '0x8000000000000000','0x0',63,
1,1,
'0xfa000000','0x0',22,
- '0xfa00000000000000','0x0',54,
1000,1,
'0x83126e98','0x1ff7ced9168',41,
- '0x83126e978d4fdf3c','0x1ff7ced916872b020c4',73,
1,1000,
], 1024 => [
'0xfa000000','0xfe000000',32,
- '0xfa00000000000000','0xfe00000000000000',64,
125,128,
'0x83126e98','0x7ef9db22',31,
- '0x83126e978d4fdf3c','0x7ef9db22d0e56041',63,
128,125,
'0xf4240000','0x3c0000',22,
- '0xf424000000000000','0x3c000000000000',54,
15625,16,
'0x8637bd06','0x1fff79c842f',41,
- '0x8637bd05af6c69b6','0x1fff79c842fa5093964',73,
16,15625,
], 1200 => [
'0xd5555556','0xd5555555',32,
- '0xd555555555555556','0xd555555555555555',64,
5,6,
'0x9999999a','0x66666666',31,
- '0x999999999999999a','0x6666666666666666',63,
6,5,
'0xd0555556','0x2aaaaa',22,
- '0xd055555555555556','0x2aaaaaaaaaaaaa',54,
2500,3,
'0x9d495183','0x1ffcb923a29',41,
- '0x9d495182a9930be1','0x1ffcb923a29c779a6b5',73,
3,2500,
]
);
@@ -264,6 +204,15 @@
return 0;
}
+# Generate a hex value if the result fits in 64 bits;
+# otherwise skip.
+sub bignum_hex($) {
+ my($x) = @_;
+ my $s = $x->as_hex();
+
+ return (length($s) > 18) ? undef : $s;
+}
+
# Provides mul, adj, and shr factors for a specific
# (bit, time, hz) combination
sub muladj($$$) {
@@ -271,7 +220,7 @@
my $s = fmuls($b, $t, $hz);
my $m = fmul($s, $t, $hz);
my $a = fadj($s, $t, $hz);
- return ($m->as_hex(), $a->as_hex(), $s);
+ return (bignum_hex($m), bignum_hex($a), $s);
}
# Provides numerator, denominator values
@@ -288,12 +237,10 @@
# HZ_TO_xx
push(@val, muladj(32, $t, $hz));
- push(@val, muladj(64, $t, $hz));
push(@val, numden($t, $hz));
# xx_TO_HZ
push(@val, muladj(32, $hz, $t));
- push(@val, muladj(64, $hz, $t));
push(@val, numden($hz, $t));
return @val;
@@ -318,6 +265,19 @@
return @val;
}
+sub outputval($$)
+{
+ my($name, $val) = @_;
+ my $csuf;
+
+ if (defined($val)) {
+ if ($name !~ /SHR/) {
+ $val = "U64_C($val)";
+ }
+ printf "#define %-23s %s\n", $name.$csuf, $val.$csuf;
+ }
+}
+
sub output($@)
{
my($hz, @val) = @_;
@@ -331,6 +291,7 @@
print "\n";
print "#include <linux/param.h>\n";
+ print "#include <linux/types.h>\n";
print "\n";
print "#if HZ != $hz\n";
@@ -340,15 +301,13 @@
foreach $pfx ('HZ_TO_MSEC','MSEC_TO_HZ',
'HZ_TO_USEC','USEC_TO_HZ') {
- foreach $bit (32, 64) {
+ foreach $bit (32) {
foreach $suf ('MUL', 'ADJ', 'SHR') {
- printf "#define %-23s %s\n",
- "${pfx}_$suf$bit", shift(@val);
+ outputval("${pfx}_$suf$bit", shift(@val));
}
}
foreach $suf ('NUM', 'DEN') {
- printf "#define %-23s %s\n",
- "${pfx}_$suf", shift(@val);
+ outputval("${pfx}_$suf", shift(@val));
}
}
@@ -356,6 +315,23 @@
print "#endif /* KERNEL_TIMECONST_H */\n";
}
+# Pretty-print Perl values
+sub perlvals(@) {
+ my $v;
+ my @l = ();
+
+ foreach $v (@_) {
+ if (!defined($v)) {
+ push(@l, 'undef');
+ } elsif ($v =~ /^0x/) {
+ push(@l, "\'".$v."\'");
+ } else {
+ push(@l, $v.'');
+ }
+ }
+ return join(',', @l);
+}
+
($hz) = @ARGV;
# Use this to generate the %canned_values structure
@@ -373,15 +349,15 @@
print "$pf$hz => [\n";
while (scalar(@values)) {
my $bit;
- foreach $bit (32, 64) {
+ foreach $bit (32) {
my $m = shift(@values);
my $a = shift(@values);
my $s = shift(@values);
- print "\t\t\'",$m,"\',\'",$a,"\',",$s,",\n";
+ print "\t\t", perlvals($m,$a,$s), ",\n";
}
my $n = shift(@values);
my $d = shift(@values);
- print "\t\t",$n,',',$d,",\n";
+ print "\t\t", perlvals($n,$d), ",\n";
}
print "\t]";
$pf = ', ';
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 721093a..29fc39f 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -195,7 +195,6 @@
int queue_delayed_work(struct workqueue_struct *wq,
struct delayed_work *dwork, unsigned long delay)
{
- timer_stats_timer_set_start_info(&dwork->timer);
if (delay == 0)
return queue_work(wq, &dwork->work);
@@ -219,11 +218,12 @@
struct timer_list *timer = &dwork->timer;
struct work_struct *work = &dwork->work;
- timer_stats_timer_set_start_info(&dwork->timer);
if (!test_and_set_bit(WORK_STRUCT_PENDING, work_data_bits(work))) {
BUG_ON(timer_pending(timer));
BUG_ON(!list_empty(&work->entry));
+ timer_stats_timer_set_start_info(&dwork->timer);
+
/* This stores cwq for the moment, for the timer_fn */
set_wq_data(work, wq_per_cpu(wq, raw_smp_processor_id()));
timer->expires = jiffies + delay;
@@ -564,7 +564,6 @@
int schedule_delayed_work(struct delayed_work *dwork,
unsigned long delay)
{
- timer_stats_timer_set_start_info(&dwork->timer);
return queue_delayed_work(keventd_wq, dwork, delay);
}
EXPORT_SYMBOL(schedule_delayed_work);
@@ -581,7 +580,6 @@
int schedule_delayed_work_on(int cpu,
struct delayed_work *dwork, unsigned long delay)
{
- timer_stats_timer_set_start_info(&dwork->timer);
return queue_delayed_work_on(cpu, keventd_wq, dwork, delay);
}
EXPORT_SYMBOL(schedule_delayed_work_on);
diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb
index f2e01ac..a5d4b1d 100644
--- a/lib/Kconfig.kgdb
+++ b/lib/Kconfig.kgdb
@@ -1,4 +1,10 @@
+config HAVE_ARCH_KGDB_SHADOW_INFO
+ bool
+
+config HAVE_ARCH_KGDB
+ bool
+
menuconfig KGDB
bool "KGDB: kernel debugging with remote gdb"
select FRAME_POINTER
@@ -10,15 +16,10 @@
at http://kgdb.sourceforge.net as well as in DocBook form
in Documentation/DocBook/. If unsure, say N.
-config HAVE_ARCH_KGDB_SHADOW_INFO
- bool
-
-config HAVE_ARCH_KGDB
- bool
+if KGDB
config KGDB_SERIAL_CONSOLE
tristate "KGDB: use kgdb over the serial console"
- depends on KGDB
select CONSOLE_POLL
select MAGIC_SYSRQ
default y
@@ -28,7 +29,6 @@
config KGDB_TESTS
bool "KGDB: internal test suite"
- depends on KGDB
default n
help
This is a kgdb I/O module specifically designed to test
@@ -56,3 +56,5 @@
boot. See the drivers/misc/kgdbts.c for detailed
information about other strings you could use beyond the
default of V1F100.
+
+endif # KGDB
diff --git a/lib/bitmap.c b/lib/bitmap.c
index c4cb48f..482df94 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -316,22 +316,6 @@
EXPORT_SYMBOL(bitmap_scnprintf);
/**
- * bitmap_scnprintf_len - return buffer length needed to convert
- * bitmap to an ASCII hex string.
- * @len: number of bits to be converted
- */
-int bitmap_scnprintf_len(unsigned int len)
-{
- /* we need 9 chars per word for 32 bit words (8 hexdigits + sep/null) */
- int bitslen = ALIGN(len, CHUNKSZ);
- int wordlen = CHUNKSZ / 4;
- int buflen = (bitslen / wordlen) * (wordlen + 1) * sizeof(char);
-
- return buflen;
-}
-EXPORT_SYMBOL(bitmap_scnprintf_len);
-
-/**
* __bitmap_parse - convert an ASCII hex string into a bitmap.
* @buf: pointer to buffer containing string.
* @buflen: buffer size in bytes. If string is smaller than this
diff --git a/lib/devres.c b/lib/devres.c
index 26c87c4..72c8909 100644
--- a/lib/devres.c
+++ b/lib/devres.c
@@ -2,7 +2,7 @@
#include <linux/io.h>
#include <linux/module.h>
-static void devm_ioremap_release(struct device *dev, void *res)
+void devm_ioremap_release(struct device *dev, void *res)
{
iounmap(*(void __iomem **)res);
}
diff --git a/lib/div64.c b/lib/div64.c
index b71cf93..bb5bd0c 100644
--- a/lib/div64.c
+++ b/lib/div64.c
@@ -16,9 +16,8 @@
* assembly versions such as arch/ppc/lib/div64.S and arch/sh/lib/div64.S.
*/
-#include <linux/types.h>
#include <linux/module.h>
-#include <asm/div64.h>
+#include <linux/math64.h>
/* Not needed on 64bit architectures */
#if BITS_PER_LONG == 32
@@ -58,10 +57,31 @@
EXPORT_SYMBOL(__div64_32);
-/* 64bit divisor, dividend and result. dynamic precision */
-uint64_t div64_64(uint64_t dividend, uint64_t divisor)
+#ifndef div_s64_rem
+s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder)
{
- uint32_t high, d;
+ u64 quotient;
+
+ if (dividend < 0) {
+ quotient = div_u64_rem(-dividend, abs(divisor), (u32 *)remainder);
+ *remainder = -*remainder;
+ if (divisor > 0)
+ quotient = -quotient;
+ } else {
+ quotient = div_u64_rem(dividend, abs(divisor), (u32 *)remainder);
+ if (divisor < 0)
+ quotient = -quotient;
+ }
+ return quotient;
+}
+EXPORT_SYMBOL(div_s64_rem);
+#endif
+
+/* 64bit divisor, dividend and result. dynamic precision */
+#ifndef div64_u64
+u64 div64_u64(u64 dividend, u64 divisor)
+{
+ u32 high, d;
high = divisor >> 32;
if (high) {
@@ -72,10 +92,9 @@
} else
d = divisor;
- do_div(dividend, d);
-
- return dividend;
+ return div_u64(dividend, d);
}
-EXPORT_SYMBOL(div64_64);
+EXPORT_SYMBOL(div64_u64);
+#endif
#endif /* BITS_PER_LONG == 32 */
diff --git a/lib/idr.c b/lib/idr.c
index 8368c81..7a02e17 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -385,8 +385,8 @@
while (idp->id_free_cnt >= IDR_FREE_MAX) {
p = alloc_layer(idp);
kmem_cache_free(idr_layer_cache, p);
- return;
}
+ return;
}
EXPORT_SYMBOL(idr_remove);
diff --git a/lib/kernel_lock.c b/lib/kernel_lock.c
index cd3e825..01a3c22 100644
--- a/lib/kernel_lock.c
+++ b/lib/kernel_lock.c
@@ -11,79 +11,121 @@
#include <linux/semaphore.h>
/*
- * The 'big kernel semaphore'
+ * The 'big kernel lock'
*
- * This mutex is taken and released recursively by lock_kernel()
+ * This spinlock is taken and released recursively by lock_kernel()
* and unlock_kernel(). It is transparently dropped and reacquired
* over schedule(). It is used to protect legacy code that hasn't
* been migrated to a proper locking design yet.
*
- * Note: code locked by this semaphore will only be serialized against
- * other code using the same locking facility. The code guarantees that
- * the task remains on the same CPU.
- *
* Don't use in new code.
*/
-static DECLARE_MUTEX(kernel_sem);
+static __cacheline_aligned_in_smp DEFINE_SPINLOCK(kernel_flag);
+
/*
- * Re-acquire the kernel semaphore.
+ * Acquire/release the underlying lock from the scheduler.
*
- * This function is called with preemption off.
+ * This is called with preemption disabled, and should
+ * return an error value if it cannot get the lock and
+ * TIF_NEED_RESCHED gets set.
*
- * We are executing in schedule() so the code must be extremely careful
- * about recursion, both due to the down() and due to the enabling of
- * preemption. schedule() will re-check the preemption flag after
- * reacquiring the semaphore.
+ * If it successfully gets the lock, it should increment
+ * the preemption count like any spinlock does.
+ *
+ * (This works on UP too - _raw_spin_trylock will never
+ * return false in that case)
*/
int __lockfunc __reacquire_kernel_lock(void)
{
- struct task_struct *task = current;
- int saved_lock_depth = task->lock_depth;
-
- BUG_ON(saved_lock_depth < 0);
-
- task->lock_depth = -1;
- preempt_enable_no_resched();
-
- down(&kernel_sem);
-
+ while (!_raw_spin_trylock(&kernel_flag)) {
+ if (test_thread_flag(TIF_NEED_RESCHED))
+ return -EAGAIN;
+ cpu_relax();
+ }
preempt_disable();
- task->lock_depth = saved_lock_depth;
-
return 0;
}
void __lockfunc __release_kernel_lock(void)
{
- up(&kernel_sem);
+ _raw_spin_unlock(&kernel_flag);
+ preempt_enable_no_resched();
}
/*
- * Getting the big kernel semaphore.
+ * These are the BKL spinlocks - we try to be polite about preemption.
+ * If SMP is not on (ie UP preemption), this all goes away because the
+ * _raw_spin_trylock() will always succeed.
+ */
+#ifdef CONFIG_PREEMPT
+static inline void __lock_kernel(void)
+{
+ preempt_disable();
+ if (unlikely(!_raw_spin_trylock(&kernel_flag))) {
+ /*
+ * If preemption was disabled even before this
+ * was called, there's nothing we can be polite
+ * about - just spin.
+ */
+ if (preempt_count() > 1) {
+ _raw_spin_lock(&kernel_flag);
+ return;
+ }
+
+ /*
+ * Otherwise, let's wait for the kernel lock
+ * with preemption enabled..
+ */
+ do {
+ preempt_enable();
+ while (spin_is_locked(&kernel_flag))
+ cpu_relax();
+ preempt_disable();
+ } while (!_raw_spin_trylock(&kernel_flag));
+ }
+}
+
+#else
+
+/*
+ * Non-preemption case - just get the spinlock
+ */
+static inline void __lock_kernel(void)
+{
+ _raw_spin_lock(&kernel_flag);
+}
+#endif
+
+static inline void __unlock_kernel(void)
+{
+ /*
+ * the BKL is not covered by lockdep, so we open-code the
+ * unlocking sequence (and thus avoid the dep-chain ops):
+ */
+ _raw_spin_unlock(&kernel_flag);
+ preempt_enable();
+}
+
+/*
+ * Getting the big kernel lock.
+ *
+ * This cannot happen asynchronously, so we only need to
+ * worry about other CPU's.
*/
void __lockfunc lock_kernel(void)
{
- struct task_struct *task = current;
- int depth = task->lock_depth + 1;
-
+ int depth = current->lock_depth+1;
if (likely(!depth))
- /*
- * No recursion worries - we set up lock_depth _after_
- */
- down(&kernel_sem);
-
- task->lock_depth = depth;
+ __lock_kernel();
+ current->lock_depth = depth;
}
void __lockfunc unlock_kernel(void)
{
- struct task_struct *task = current;
-
- BUG_ON(task->lock_depth < 0);
-
- if (likely(--task->lock_depth < 0))
- up(&kernel_sem);
+ BUG_ON(current->lock_depth < 0);
+ if (likely(--current->lock_depth < 0))
+ __unlock_kernel();
}
EXPORT_SYMBOL(lock_kernel);
diff --git a/lib/string.c b/lib/string.c
index 5efafed..b19b87a 100644
--- a/lib/string.c
+++ b/lib/string.c
@@ -493,6 +493,33 @@
EXPORT_SYMBOL(strsep);
#endif
+/**
+ * sysfs_streq - return true if strings are equal, modulo trailing newline
+ * @s1: one string
+ * @s2: another string
+ *
+ * This routine returns true iff two strings are equal, treating both
+ * NUL and newline-then-NUL as equivalent string terminations. It's
+ * geared for use with sysfs input strings, which generally terminate
+ * with newlines but are compared against values without newlines.
+ */
+bool sysfs_streq(const char *s1, const char *s2)
+{
+ while (*s1 && *s1 == *s2) {
+ s1++;
+ s2++;
+ }
+
+ if (*s1 == *s2)
+ return true;
+ if (!*s1 && *s2 == '\n' && !s2[1])
+ return true;
+ if (*s1 == '\n' && !s1[1] && !*s2)
+ return true;
+ return false;
+}
+EXPORT_SYMBOL(sysfs_streq);
+
#ifndef __HAVE_ARCH_MEMSET
/**
* memset - Fill a region of memory with the given value
diff --git a/mm/filemap.c b/mm/filemap.c
index 239d361..2dead9a 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1655,7 +1655,7 @@
}
EXPORT_SYMBOL(should_remove_suid);
-int __remove_suid(struct dentry *dentry, int kill)
+static int __remove_suid(struct dentry *dentry, int kill)
{
struct iattr newattrs;
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 33add96..e46451e 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -48,6 +48,8 @@
*/
MEM_CGROUP_STAT_CACHE, /* # of pages charged as cache */
MEM_CGROUP_STAT_RSS, /* # of pages charged as rss */
+ MEM_CGROUP_STAT_PGPGIN_COUNT, /* # of pages paged in */
+ MEM_CGROUP_STAT_PGPGOUT_COUNT, /* # of pages paged out */
MEM_CGROUP_STAT_NSTATS,
};
@@ -199,6 +201,13 @@
__mem_cgroup_stat_add_safe(stat, MEM_CGROUP_STAT_CACHE, val);
else
__mem_cgroup_stat_add_safe(stat, MEM_CGROUP_STAT_RSS, val);
+
+ if (charge)
+ __mem_cgroup_stat_add_safe(stat,
+ MEM_CGROUP_STAT_PGPGIN_COUNT, 1);
+ else
+ __mem_cgroup_stat_add_safe(stat,
+ MEM_CGROUP_STAT_PGPGOUT_COUNT, 1);
}
static struct mem_cgroup_per_zone *
@@ -884,6 +893,8 @@
} mem_cgroup_stat_desc[] = {
[MEM_CGROUP_STAT_CACHE] = { "cache", PAGE_SIZE, },
[MEM_CGROUP_STAT_RSS] = { "rss", PAGE_SIZE, },
+ [MEM_CGROUP_STAT_PGPGIN_COUNT] = {"pgpgin", 1, },
+ [MEM_CGROUP_STAT_PGPGOUT_COUNT] = {"pgpgout", 1, },
};
static int mem_control_stat_show(struct cgroup *cont, struct cftype *cft,
diff --git a/mm/memory.c b/mm/memory.c
index bbab1e37..fb5608a 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -311,6 +311,21 @@
if (!new)
return -ENOMEM;
+ /*
+ * Ensure all pte setup (eg. pte page lock and page clearing) are
+ * visible before the pte is made visible to other CPUs by being
+ * put into page tables.
+ *
+ * The other side of the story is the pointer chasing in the page
+ * table walking code (when walking the page table without locking;
+ * ie. most of the time). Fortunately, these data accesses consist
+ * of a chain of data-dependent loads, meaning most CPUs (alpha
+ * being the notable exception) will already guarantee loads are
+ * seen in-order. See the alpha page table accessors for the
+ * smp_read_barrier_depends() barriers in page table walking code.
+ */
+ smp_wmb(); /* Could be smp_wmb__xxx(before|after)_spin_lock */
+
spin_lock(&mm->page_table_lock);
if (!pmd_present(*pmd)) { /* Has another populated it ? */
mm->nr_ptes++;
@@ -329,6 +344,8 @@
if (!new)
return -ENOMEM;
+ smp_wmb(); /* See comment in __pte_alloc */
+
spin_lock(&init_mm.page_table_lock);
if (!pmd_present(*pmd)) { /* Has another populated it ? */
pmd_populate_kernel(&init_mm, pmd, new);
@@ -969,7 +986,7 @@
goto no_page_table;
pmd = pmd_offset(pud, address);
- if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd)))
+ if (pmd_none(*pmd))
goto no_page_table;
if (pmd_huge(*pmd)) {
@@ -978,6 +995,9 @@
goto out;
}
+ if (unlikely(pmd_bad(*pmd)))
+ goto no_page_table;
+
ptep = pte_offset_map_lock(mm, pmd, address, &ptl);
if (!ptep)
goto out;
@@ -2616,6 +2636,8 @@
if (!new)
return -ENOMEM;
+ smp_wmb(); /* See comment in __pte_alloc */
+
spin_lock(&mm->page_table_lock);
if (pgd_present(*pgd)) /* Another has populated it */
pud_free(mm, new);
@@ -2637,6 +2659,8 @@
if (!new)
return -ENOMEM;
+ smp_wmb(); /* See comment in __pte_alloc */
+
spin_lock(&mm->page_table_lock);
#ifndef __ARCH_HAS_4LEVEL_HACK
if (pud_present(*pud)) /* Another has populated it */
diff --git a/mm/pdflush.c b/mm/pdflush.c
index 1c96cfc..9d834aa 100644
--- a/mm/pdflush.c
+++ b/mm/pdflush.c
@@ -207,7 +207,6 @@
spin_lock_irqsave(&pdflush_lock, flags);
if (list_empty(&pdflush_list)) {
- spin_unlock_irqrestore(&pdflush_lock, flags);
ret = -1;
} else {
struct pdflush_work *pdf;
@@ -219,8 +218,9 @@
pdf->fn = fn;
pdf->arg0 = arg0;
wake_up_process(pdf->who);
- spin_unlock_irqrestore(&pdflush_lock, flags);
}
+ spin_unlock_irqrestore(&pdflush_lock, flags);
+
return ret;
}
diff --git a/mm/slub.c b/mm/slub.c
index 70db289..a505a82 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -22,6 +22,7 @@
#include <linux/debugobjects.h>
#include <linux/kallsyms.h>
#include <linux/memory.h>
+#include <linux/math64.h>
/*
* Lock order:
@@ -216,7 +217,7 @@
enum track_item { TRACK_ALLOC, TRACK_FREE };
-#if defined(CONFIG_SYSFS) && defined(CONFIG_SLUB_DEBUG)
+#ifdef CONFIG_SLUB_DEBUG
static int sysfs_slab_add(struct kmem_cache *);
static int sysfs_slab_alias(struct kmem_cache *, const char *);
static void sysfs_slab_remove(struct kmem_cache *);
@@ -813,7 +814,8 @@
return search == NULL;
}
-static void trace(struct kmem_cache *s, struct page *page, void *object, int alloc)
+static void trace(struct kmem_cache *s, struct page *page, void *object,
+ int alloc)
{
if (s->flags & SLAB_TRACE) {
printk(KERN_INFO "TRACE %s %s 0x%p inuse=%d fp=0x%p\n",
@@ -1266,8 +1268,7 @@
spin_unlock(&n->list_lock);
}
-static void remove_partial(struct kmem_cache *s,
- struct page *page)
+static void remove_partial(struct kmem_cache *s, struct page *page)
{
struct kmem_cache_node *n = get_node(s, page_to_nid(page));
@@ -1282,7 +1283,8 @@
*
* Must hold list_lock.
*/
-static inline int lock_and_freeze_slab(struct kmem_cache_node *n, struct page *page)
+static inline int lock_and_freeze_slab(struct kmem_cache_node *n,
+ struct page *page)
{
if (slab_trylock(page)) {
list_del(&page->lru);
@@ -1419,8 +1421,8 @@
* so that the others get filled first. That way the
* size of the partial list stays small.
*
- * kmem_cache_shrink can reclaim any empty slabs from the
- * partial list.
+ * kmem_cache_shrink can reclaim any empty slabs from
+ * the partial list.
*/
add_partial(n, page, 1);
slab_unlock(page);
@@ -2908,7 +2910,7 @@
return 0;
/*
- * We are bringing a node online. No memory is availabe yet. We must
+ * We are bringing a node online. No memory is available yet. We must
* allocate a kmem_cache_node structure in order to bring the node
* online.
*/
@@ -3245,7 +3247,7 @@
return slab_alloc(s, gfpflags, node, caller);
}
-#if (defined(CONFIG_SYSFS) && defined(CONFIG_SLUB_DEBUG)) || defined(CONFIG_SLABINFO)
+#ifdef CONFIG_SLUB_DEBUG
static unsigned long count_partial(struct kmem_cache_node *n,
int (*get_count)(struct page *))
{
@@ -3274,9 +3276,7 @@
{
return page->objects - page->inuse;
}
-#endif
-#if defined(CONFIG_SYSFS) && defined(CONFIG_SLUB_DEBUG)
static int validate_slab(struct kmem_cache *s, struct page *page,
unsigned long *map)
{
@@ -3621,12 +3621,10 @@
len += sprintf(buf + len, "<not-available>");
if (l->sum_time != l->min_time) {
- unsigned long remainder;
-
len += sprintf(buf + len, " age=%ld/%ld/%ld",
- l->min_time,
- div_long_long_rem(l->sum_time, l->count, &remainder),
- l->max_time);
+ l->min_time,
+ (long)div_u64(l->sum_time, l->count),
+ l->max_time);
} else
len += sprintf(buf + len, " age=%ld",
l->min_time);
@@ -3764,7 +3762,7 @@
if (!n)
continue;
- if (atomic_read(&n->total_objects))
+ if (atomic_long_read(&n->total_objects))
return 1;
}
return 0;
@@ -3813,7 +3811,12 @@
static ssize_t order_store(struct kmem_cache *s,
const char *buf, size_t length)
{
- int order = simple_strtoul(buf, NULL, 10);
+ unsigned long order;
+ int err;
+
+ err = strict_strtoul(buf, 10, &order);
+ if (err)
+ return err;
if (order > slub_max_order || order < slub_min_order)
return -EINVAL;
@@ -4066,10 +4069,16 @@
static ssize_t remote_node_defrag_ratio_store(struct kmem_cache *s,
const char *buf, size_t length)
{
- int n = simple_strtoul(buf, NULL, 10);
+ unsigned long ratio;
+ int err;
- if (n < 100)
- s->remote_node_defrag_ratio = n * 10;
+ err = strict_strtoul(buf, 10, &ratio);
+ if (err)
+ return err;
+
+ if (ratio < 100)
+ s->remote_node_defrag_ratio = ratio * 10;
+
return length;
}
SLAB_ATTR(remote_node_defrag_ratio);
@@ -4426,8 +4435,8 @@
*/
#ifdef CONFIG_SLABINFO
-ssize_t slabinfo_write(struct file *file, const char __user * buffer,
- size_t count, loff_t *ppos)
+ssize_t slabinfo_write(struct file *file, const char __user *buffer,
+ size_t count, loff_t *ppos)
{
return -EINVAL;
}
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 2a39cf1..6e45b0f 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -547,6 +547,7 @@
* @gfp_mask: flags for the page level allocator
* @prot: protection mask for the allocated pages
* @node: node to use for allocation or -1
+ * @caller: caller's return address
*
* Allocate enough pages to cover @size from the page level
* allocator with @gfp_mask flags. Map them into contiguous
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 1a32130..db9eabb 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -41,7 +41,9 @@
*/
void all_vm_events(unsigned long *ret)
{
+ get_online_cpus();
sum_vm_events(ret, &cpu_online_map);
+ put_online_cpus();
}
EXPORT_SYMBOL_GPL(all_vm_events);
diff --git a/net/can/bcm.c b/net/can/bcm.c
index 74fd2d3..d9a3a9d 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -412,12 +412,6 @@
bcm_send_to_user(op, &head, data, 1);
}
-/* TODO: move to linux/hrtimer.h */
-static inline int hrtimer_callback_running(struct hrtimer *timer)
-{
- return timer->state & HRTIMER_STATE_CALLBACK;
-}
-
/*
* bcm_rx_update_and_send - process a detected relevant receive content change
* 1. update the last received data
diff --git a/net/ipv4/tcp_cubic.c b/net/ipv4/tcp_cubic.c
index eb5b985..4a1221e 100644
--- a/net/ipv4/tcp_cubic.c
+++ b/net/ipv4/tcp_cubic.c
@@ -15,8 +15,8 @@
#include <linux/mm.h>
#include <linux/module.h>
+#include <linux/math64.h>
#include <net/tcp.h>
-#include <asm/div64.h>
#define BICTCP_BETA_SCALE 1024 /* Scale factor beta calculation
* max_cwnd = snd_cwnd * beta
@@ -128,7 +128,7 @@
* x = ( 2 * x + a / x ) / 3
* k+1 k k
*/
- x = (2 * x + (u32)div64_64(a, (u64)x * (u64)(x - 1)));
+ x = (2 * x + (u32)div64_u64(a, (u64)x * (u64)(x - 1)));
x = ((x * 341) >> 10);
return x;
}
diff --git a/net/netfilter/xt_connbytes.c b/net/netfilter/xt_connbytes.c
index b15e7e2..d7e8983 100644
--- a/net/netfilter/xt_connbytes.c
+++ b/net/netfilter/xt_connbytes.c
@@ -4,12 +4,11 @@
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/skbuff.h>
+#include <linux/math64.h>
#include <linux/netfilter/x_tables.h>
#include <linux/netfilter/xt_connbytes.h>
#include <net/netfilter/nf_conntrack.h>
-#include <asm/div64.h>
-
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Harald Welte <laforge@netfilter.org>");
MODULE_DESCRIPTION("Xtables: Number of packets/bytes per connection matching");
@@ -82,7 +81,7 @@
break;
}
if (pkts != 0)
- what = div64_64(bytes, pkts);
+ what = div64_u64(bytes, pkts);
break;
}
diff --git a/net/sunrpc/svc.c b/net/sunrpc/svc.c
index d74c2d2..01c7e31 100644
--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -18,7 +18,6 @@
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/module.h>
-#include <linux/sched.h>
#include <linux/sunrpc/types.h>
#include <linux/sunrpc/xdr.h>
diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h
index 4bc68f2..96521cb 100644
--- a/scripts/kconfig/lkc.h
+++ b/scripts/kconfig/lkc.h
@@ -11,9 +11,9 @@
#ifndef KBUILD_NO_NLS
# include <libintl.h>
#else
-# define gettext(Msgid) ((const char *) (Msgid))
-# define textdomain(Domainname) ((const char *) (Domainname))
-# define bindtextdomain(Domainname, Dirname) ((const char *) (Dirname))
+static inline const char *gettext(const char *txt) { return txt; }
+static inline void textdomain(const char *domainname) {}
+static inline void bindtextdomain(const char *name, const char *dir) {}
#endif
#ifdef __cplusplus
diff --git a/scripts/kconfig/lxdialog/check-lxdialog.sh b/scripts/kconfig/lxdialog/check-lxdialog.sh
index 62e1e02..5552154 100644
--- a/scripts/kconfig/lxdialog/check-lxdialog.sh
+++ b/scripts/kconfig/lxdialog/check-lxdialog.sh
@@ -36,8 +36,10 @@
# Check if we can link to ncurses
check() {
- echo -e " #include CURSES_LOC \n main() {}" |
- $cc -xc - -o $tmp 2> /dev/null
+ $cc -xc - -o $tmp 2>/dev/null <<'EOF'
+#include CURSES_LOC
+main() {}
+EOF
if [ $? != 0 ]; then
echo " *** Unable to find the ncurses libraries or the" 1>&2
echo " *** required header files." 1>&2
diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
index 734cf4f..6841e95c 100644
--- a/scripts/kconfig/mconf.c
+++ b/scripts/kconfig/mconf.c
@@ -773,7 +773,7 @@
while (1) {
int res;
- char *heading;
+ const char *heading;
switch (sym_get_type(menu->sym)) {
case S_INT:
@@ -925,3 +925,4 @@
return 0;
}
+
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index e04c4218..cea4a79 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -51,6 +51,15 @@
sprintf(str + strlen(str), "*"); \
} while(0)
+/* Always end in a wildcard, for future extension */
+static inline void add_wildcard(char *str)
+{
+ int len = strlen(str);
+
+ if (str[len - 1] != '*')
+ strcat(str + len, "*");
+}
+
unsigned int cross_build = 0;
/**
* Check that sizeof(device_id type) are consistent with size of section
@@ -133,9 +142,7 @@
id->match_flags&USB_DEVICE_ID_MATCH_INT_PROTOCOL,
id->bInterfaceProtocol);
- /* Always end in a wildcard, for future extension */
- if (alias[strlen(alias)-1] != '*')
- strcat(alias, "*");
+ add_wildcard(alias);
buf_printf(&mod->dev_table_buf,
"MODULE_ALIAS(\"%s\");\n", alias);
}
@@ -219,6 +226,7 @@
ADD(alias, "ver", id->match_flags & IEEE1394_MATCH_VERSION,
id->version);
+ add_wildcard(alias);
return 1;
}
@@ -261,6 +269,7 @@
ADD(alias, "bc", baseclass_mask == 0xFF, baseclass);
ADD(alias, "sc", subclass_mask == 0xFF, subclass);
ADD(alias, "i", interface_mask == 0xFF, interface);
+ add_wildcard(alias);
return 1;
}
@@ -283,6 +292,7 @@
id->dev_type);
ADD(alias, "dm", id->match_flags&CCW_DEVICE_ID_MATCH_DEVICE_MODEL,
id->dev_model);
+ add_wildcard(alias);
return 1;
}
@@ -290,7 +300,7 @@
static int do_ap_entry(const char *filename,
struct ap_device_id *id, char *alias)
{
- sprintf(alias, "ap:t%02X", id->dev_type);
+ sprintf(alias, "ap:t%02X*", id->dev_type);
return 1;
}
@@ -309,6 +319,7 @@
ADD(alias, "id", id->id != SERIO_ANY, id->id);
ADD(alias, "ex", id->extra != SERIO_ANY, id->extra);
+ add_wildcard(alias);
return 1;
}
@@ -316,7 +327,7 @@
static int do_acpi_entry(const char *filename,
struct acpi_device_id *id, char *alias)
{
- sprintf(alias, "acpi*:%s:", id->id);
+ sprintf(alias, "acpi*:%s:*", id->id);
return 1;
}
@@ -324,7 +335,7 @@
static int do_pnp_entry(const char *filename,
struct pnp_device_id *id, char *alias)
{
- sprintf(alias, "pnp:d%s", id->id);
+ sprintf(alias, "pnp:d%s*", id->id);
return 1;
}
@@ -409,6 +420,7 @@
ADD(alias, "pc", id->match_flags & PCMCIA_DEV_ID_MATCH_PROD_ID3, id->prod_id_hash[2]);
ADD(alias, "pd", id->match_flags & PCMCIA_DEV_ID_MATCH_PROD_ID4, id->prod_id_hash[3]);
+ add_wildcard(alias);
return 1;
}
@@ -432,6 +444,7 @@
if (isspace (*tmp))
*tmp = '_';
+ add_wildcard(alias);
return 1;
}
@@ -448,6 +461,7 @@
if (isspace (*tmp))
*tmp = '_';
+ add_wildcard(alias);
return 1;
}
@@ -511,6 +525,8 @@
{
if (eisa->sig[0])
sprintf(alias, EISA_DEVICE_MODALIAS_FMT "*", eisa->sig);
+ else
+ strcat(alias, "*");
return 1;
}
@@ -529,6 +545,7 @@
ADD(alias, "rev", id->hversion_rev != PA_HVERSION_REV_ANY_ID, id->hversion_rev);
ADD(alias, "sv", id->sversion != PA_SVERSION_ANY_ID, id->sversion);
+ add_wildcard(alias);
return 1;
}
@@ -544,6 +561,7 @@
ADD(alias, "c", id->class != (__u8)SDIO_ANY_ID, id->class);
ADD(alias, "v", id->vendor != (__u16)SDIO_ANY_ID, id->vendor);
ADD(alias, "d", id->device != (__u16)SDIO_ANY_ID, id->device);
+ add_wildcard(alias);
return 1;
}
@@ -559,6 +577,7 @@
ADD(alias, "v", id->vendor != SSB_ANY_VENDOR, id->vendor);
ADD(alias, "id", id->coreid != SSB_ANY_ID, id->coreid);
ADD(alias, "rev", id->revision != SSB_ANY_REV, id->revision);
+ add_wildcard(alias);
return 1;
}
@@ -573,6 +592,7 @@
ADD(alias, "d", 1, id->device);
ADD(alias, "v", id->vendor != VIRTIO_DEV_ANY_ID, id->vendor);
+ add_wildcard(alias);
return 1;
}
@@ -612,9 +632,6 @@
for (i = 0; i < size; i += id_size) {
if (do_entry(mod->name, symval+i, alias)) {
- /* Always end in a wildcard, for future extension */
- if (alias[strlen(alias)-1] != '*')
- strcat(alias, "*");
buf_printf(&mod->dev_table_buf,
"MODULE_ALIAS(\"%s\");\n", alias);
}
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 1b50a6e..1c864c0 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -39,6 +39,7 @@
#include <linux/spinlock.h>
#include <linux/syscalls.h>
#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/namei.h>
#include <linux/mount.h>
#include <linux/ext2_fs.h>
diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig
index a78a8d0..379bcb0 100644
--- a/sound/drivers/Kconfig
+++ b/sound/drivers/Kconfig
@@ -5,8 +5,8 @@
config SND_PCSP
- tristate "Internal PC speaker support"
- depends on X86_PC && HIGH_RES_TIMERS
+ tristate "PC-Speaker support"
+ depends on PCSPKR_PLATFORM && X86_PC && HIGH_RES_TIMERS
depends on INPUT
depends on SND
select SND_PCM
diff --git a/sound/drivers/pcsp/pcsp.c b/sound/drivers/pcsp/pcsp.c
index 5920351..54a1f90 100644
--- a/sound/drivers/pcsp/pcsp.c
+++ b/sound/drivers/pcsp/pcsp.c
@@ -194,6 +194,7 @@
spin_unlock_irq(&chip->substream_lock);
}
+#ifdef CONFIG_PM
static int pcsp_suspend(struct platform_device *dev, pm_message_t state)
{
struct snd_pcsp *chip = platform_get_drvdata(dev);
@@ -201,6 +202,9 @@
snd_pcm_suspend_all(chip->pcm);
return 0;
}
+#else
+#define pcsp_suspend NULL
+#endif /* CONFIG_PM */
static void pcsp_shutdown(struct platform_device *dev)
{
diff --git a/sound/oss/kahlua.c b/sound/oss/kahlua.c
index dfe670f..eb9bc36 100644
--- a/sound/oss/kahlua.c
+++ b/sound/oss/kahlua.c
@@ -67,7 +67,7 @@
return 1;
mem = ioremap(base, 128);
- if(mem == 0UL)
+ if (!mem)
return 1;
map = readw(mem + 0x18); /* Read the SMI enables */
iounmap(mem);
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 581debf..7e47421 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -515,19 +515,16 @@
config SND_FM801_TEA575X_BOOL
bool "ForteMedia FM801 + TEA5757 tuner"
depends on SND_FM801
+ depends on VIDEO_V4L1=y || VIDEO_V4L1=SND_FM801
help
Say Y here to include support for soundcards based on the ForteMedia
FM801 chip with a TEA5757 tuner connected to GPIO1-3 pins (Media
Forte SF256-PCS-02) into the snd-fm801 driver.
- This will enable support for the old V4L1 API.
-
config SND_FM801_TEA575X
tristate
depends on SND_FM801_TEA575X_BOOL
default SND_FM801
- select VIDEO_V4L1
- select VIDEO_DEV
config SND_HDA_INTEL
tristate "Intel HD Audio"
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index 39198e5..2da8981 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -3446,6 +3446,7 @@
int patch_vt1617a(struct snd_ac97 * ac97)
{
int err = 0;
+ int val;
/* we choose to not fail out at this point, but we tell the
caller when we return */
@@ -3456,7 +3457,13 @@
/* bring analog power consumption to normal by turning off the
* headphone amplifier, like WinXP driver for EPIA SP
*/
- snd_ac97_write_cache(ac97, 0x5c, 0x20);
+ /* We need to check the bit before writing it.
+ * On some (many?) hardwares, setting bit actually clears it!
+ */
+ val = snd_ac97_read(ac97, 0x5c);
+ if (!(val & 0x20))
+ snd_ac97_write_cache(ac97, 0x5c, 0x20);
+
ac97->ext_id |= AC97_EI_SPDIF; /* force the detection of spdif */
ac97->rates[AC97_RATES_SPDIF] = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000;
ac97->build_ops = &patch_vt1616_ops;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index d9783a4..6d4df45 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -11902,7 +11902,10 @@
hda_nid_t nid,
int pin_type, int dac_idx)
{
- alc_set_pin_output(codec, nid, pin_type);
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ pin_type);
+ snd_hda_codec_write(codec, dac_idx, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_OUT_UNMUTE);
}
static void alc861_auto_init_multi_out(struct hda_codec *codec)
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index b3a15d6..393f7fd 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -4289,6 +4289,8 @@
{ .id = 0x83847635, .name = "STAC9250D", .patch = patch_stac925x },
{ .id = 0x83847636, .name = "STAC9251", .patch = patch_stac925x },
{ .id = 0x83847637, .name = "STAC9250D", .patch = patch_stac925x },
+ { .id = 0x83847645, .name = "92HD206X", .patch = patch_stac927x },
+ { .id = 0x83847646, .name = "92HD206D", .patch = patch_stac927x },
/* The following does not take into account .id=0x83847661 when subsys =
* 104D0C00 which is STAC9225s. Because of this, some SZ Notebooks are
* currently not fully supported.
diff --git a/sound/soc/at91/at91-pcm.c b/sound/soc/at91/at91-pcm.c
index 67c88e3..ccac6bd 100644
--- a/sound/soc/at91/at91-pcm.c
+++ b/sound/soc/at91/at91-pcm.c
@@ -103,7 +103,8 @@
if (prtd->period_ptr >= prtd->dma_buffer_end) {
prtd->period_ptr = prtd->dma_buffer;
}
- at91_ssc_write(params->ssc_base + params->pdc->xnpr, prtd->period_ptr);
+ at91_ssc_write(params->ssc_base + params->pdc->xnpr,
+ prtd->period_ptr);
at91_ssc_write(params->ssc_base + params->pdc->xncr,
prtd->period_size / params->pdc_xfer_size);
}
@@ -191,10 +192,12 @@
at91_ssc_write(params->ssc_base + AT91_SSC_IER,
params->mask->ssc_endx | params->mask->ssc_endbuf);
- at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable);
+ at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR,
+ params->mask->pdc_enable);
- DBG("sr=%lx imr=%lx\n", at91_ssc_read(params->ssc_base + AT91_SSC_SR),
- at91_ssc_read(params->ssc_base + AT91_SSC_IER));
+ DBG("sr=%lx imr=%lx\n",
+ at91_ssc_read(params->ssc_base + AT91_SSC_SR),
+ at91_ssc_read(params->ssc_base + AT91_SSC_IMR));
break;
case SNDRV_PCM_TRIGGER_STOP:
diff --git a/sound/soc/at91/at91-ssc.c b/sound/soc/at91/at91-ssc.c
index f642d2d..bc35d00 100644
--- a/sound/soc/at91/at91-ssc.c
+++ b/sound/soc/at91/at91-ssc.c
@@ -590,7 +590,7 @@
printk(KERN_WARNING "at91-ssc: request_irq failure\n");
DBG("Stopping pid %d clock\n", ssc_p->ssc.pid);
- at91_sys_write(AT91_PMC_PCER, 1<<ssc_p->ssc.pid);
+ at91_sys_write(AT91_PMC_PCDR, 1<<ssc_p->ssc.pid);
return ret;
}
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 630684f..09b1661 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -539,8 +539,8 @@
{"HPRCOM", NULL, "Right HP Com"},
/* Mono Output */
- {"MONOLOUT", NULL, "Mono Out"},
- {"MONOLOUT", NULL, "Mono Out"},
+ {"MONO_LOUT", NULL, "Mono Out"},
+ {"MONO_LOUT", NULL, "Mono Out"},
/* Left Input */
{"Left Line1L Mux", "single-ended", "LINE1L"},
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index b2a11b0..f588545 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -416,7 +416,7 @@
* to put data into its FIFO. Without it, ALSA starts
* to complain about overruns.
*/
- msleep(1);
+ mdelay(1);
}
break;
diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c
index 83b1eb4..6533563 100644
--- a/sound/soc/omap/n810.c
+++ b/sound/soc/omap/n810.c
@@ -188,8 +188,8 @@
static const char *spk_function[] = {"Off", "On"};
static const char *jack_function[] = {"Off", "Headphone"};
static const struct soc_enum n810_enum[] = {
- SOC_ENUM_SINGLE_EXT(2, spk_function),
- SOC_ENUM_SINGLE_EXT(3, jack_function),
+ SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(spk_function), spk_function),
+ SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(jack_function), jack_function),
};
static const struct snd_kcontrol_new aic33_n810_controls[] = {
diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c
index 4ebcd6a..1ed6afd 100644
--- a/sound/soc/s3c24xx/s3c24xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c24xx-i2s.c
@@ -224,6 +224,7 @@
iismod |= S3C2410_IISMOD_SLAVE;
break;
case SND_SOC_DAIFMT_CBS_CFS:
+ iismod &= ~S3C2410_IISMOD_SLAVE;
break;
default:
return -EINVAL;
@@ -234,6 +235,7 @@
iismod |= S3C2410_IISMOD_MSB;
break;
case SND_SOC_DAIFMT_I2S:
+ iismod &= ~S3C2410_IISMOD_MSB;
break;
default:
return -EINVAL;
diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c
index 6c70a81..7806ae6 100644
--- a/sound/soc/s3c24xx/s3c24xx-pcm.c
+++ b/sound/soc/s3c24xx/s3c24xx-pcm.c
@@ -171,7 +171,7 @@
ret = s3c2410_dma_request(prtd->params->channel,
prtd->params->client, NULL);
- if (ret) {
+ if (ret < 0) {
DBG(KERN_ERR "failed to get dma channel\n");
return ret;
}
diff --git a/sound/synth/emux/emux_synth.c b/sound/synth/emux/emux_synth.c
index 478369b..b343818 100644
--- a/sound/synth/emux/emux_synth.c
+++ b/sound/synth/emux/emux_synth.c
@@ -341,8 +341,12 @@
case MIDI_CTL_SOFT_PEDAL:
#ifdef SNDRV_EMUX_USE_RAW_EFFECT
/* FIXME: this is an emulation */
- snd_emux_send_effect(port, chan, EMUX_FX_CUTOFF, -160,
+ if (chan->control[type] >= 64)
+ snd_emux_send_effect(port, chan, EMUX_FX_CUTOFF, -160,
EMUX_FX_FLAG_ADD);
+ else
+ snd_emux_send_effect(port, chan, EMUX_FX_CUTOFF, 0,
+ EMUX_FX_FLAG_OFF);
#endif
break;
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index c82cf15..f7ba099 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -522,6 +522,7 @@
return bad_hva();
return (slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE);
}
+EXPORT_SYMBOL_GPL(gfn_to_hva);
/*
* Requires current->mm->mmap_sem to be held
@@ -834,16 +835,9 @@
*/
static int create_vcpu_fd(struct kvm_vcpu *vcpu)
{
- int fd, r;
- struct inode *inode;
- struct file *file;
-
- r = anon_inode_getfd(&fd, &inode, &file,
- "kvm-vcpu", &kvm_vcpu_fops, vcpu);
- if (r) {
+ int fd = anon_inode_getfd("kvm-vcpu", &kvm_vcpu_fops, vcpu);
+ if (fd < 0)
kvm_put_kvm(vcpu->kvm);
- return r;
- }
return fd;
}
@@ -1168,19 +1162,15 @@
static int kvm_dev_ioctl_create_vm(void)
{
- int fd, r;
- struct inode *inode;
- struct file *file;
+ int fd;
struct kvm *kvm;
kvm = kvm_create_vm();
if (IS_ERR(kvm))
return PTR_ERR(kvm);
- r = anon_inode_getfd(&fd, &inode, &file, "kvm-vm", &kvm_vm_fops, kvm);
- if (r) {
+ fd = anon_inode_getfd("kvm-vm", &kvm_vm_fops, kvm);
+ if (fd < 0)
kvm_put_kvm(kvm);
- return r;
- }
return fd;
}
