Merge 5.10.124 into android13-5.10-lts

Changes in 5.10.124
	9p: missing chunk of "fs/9p: Don't update file type when updating file attributes"
	nfsd: Replace use of rwsem with errseq_t
	bpf: Fix incorrect memory charge cost calculation in stack_map_alloc()
	arm64: dts: imx8mm-beacon: Enable RTS-CTS on UART3
	powerpc/kasan: Silence KASAN warnings in __get_wchan()
	ASoC: nau8822: Add operation for internal PLL off and on
	dma-debug: make things less spammy under memory pressure
	ASoC: cs42l52: Fix TLV scales for mixer controls
	ASoC: cs35l36: Update digital volume TLV
	ASoC: cs53l30: Correct number of volume levels on SX controls
	ASoC: cs42l52: Correct TLV for Bypass Volume
	ASoC: cs42l56: Correct typo in minimum level for SX volume controls
	ASoC: cs42l51: Correct minimum value for SX volume control
	ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo()
	quota: Prevent memory allocation recursion while holding dq_lock
	ASoC: wm8962: Fix suspend while playing music
	ASoC: es8328: Fix event generation for deemphasis control
	ASoC: wm_adsp: Fix event generation for wm_adsp_fw_put()
	Input: soc_button_array - also add Lenovo Yoga Tablet2 1051F to dmi_use_low_level_irq
	scsi: vmw_pvscsi: Expand vcpuHint to 16 bits
	scsi: lpfc: Fix port stuck in bypassed state after LIP in PT2PT topology
	scsi: lpfc: Allow reduced polling rate for nvme_admin_async_event cmd completion
	scsi: ipr: Fix missing/incorrect resource cleanup in error case
	scsi: pmcraid: Fix missing resource cleanup in error case
	ALSA: hda/realtek - Add HW8326 support
	virtio-mmio: fix missing put_device() when vm_cmdline_parent registration failed
	nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred
	ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg
	net: ethernet: mtk_eth_soc: fix misuse of mem alloc interface netdev[napi]_alloc_frag
	mellanox: mlx5: avoid uninitialized variable warning with gcc-12
	MIPS: Loongson-3: fix compile mips cpu_hwmon as module build error.
	gpio: dwapb: Don't print error on -EPROBE_DEFER
	random: credit cpu and bootloader seeds by default
	pNFS: Don't keep retrying if the server replied NFS4ERR_LAYOUTUNAVAILABLE
	pNFS: Avoid a live lock condition in pnfs_update_layout()
	clocksource: hyper-v: unexport __init-annotated hv_init_clocksource()
	i40e: Fix adding ADQ filter to TC0
	i40e: Fix calculating the number of queue pairs
	i40e: Fix call trace in setup_tx_descriptors
	Drivers: hv: vmbus: Release cpu lock in error case
	tty: goldfish: Fix free_irq() on remove
	misc: atmel-ssc: Fix IRQ check in ssc_probe
	drm/i915/reset: Fix error_state_read ptr + offset use
	nvme: use sysfs_emit instead of sprintf
	nvme: add device name to warning in uuid_show()
	mlxsw: spectrum_cnt: Reorder counter pools
	net: bgmac: Fix an erroneous kfree() in bgmac_remove()
	net: ax25: Fix deadlock caused by skb_recv_datagram in ax25_recvmsg
	arm64: ftrace: fix branch range checks
	arm64: ftrace: consistently handle PLTs.
	certs/blacklist_hashes.c: fix const confusion in certs blacklist
	block: Fix handling of offline queues in blk_mq_alloc_request_hctx()
	faddr2line: Fix overlapping text section failures, the sequel
	i2c: npcm7xx: Add check for platform_driver_register
	irqchip/gic/realview: Fix refcount leak in realview_gic_of_init
	irqchip/gic-v3: Fix error handling in gic_populate_ppi_partitions
	irqchip/gic-v3: Fix refcount leak in gic_populate_ppi_partitions
	i2c: designware: Use standard optional ref clock implementation
	mei: me: add raptor lake point S DID
	comedi: vmk80xx: fix expression for tx buffer size
	crypto: memneq - move into lib/
	USB: serial: option: add support for Cinterion MV31 with new baseline
	USB: serial: io_ti: add Agilent E5805A support
	usb: dwc2: Fix memory leak in dwc2_hcd_init
	usb: gadget: lpc32xx_udc: Fix refcount leak in lpc32xx_udc_probe
	serial: 8250: Store to lsr_save_flags after lsr read
	dm mirror log: round up region bitmap size to BITS_PER_LONG
	drm/amd/display: Cap OLED brightness per max frame-average luminance
	ext4: fix bug_on ext4_mb_use_inode_pa
	ext4: make variable "count" signed
	ext4: add reserved GDT blocks check
	KVM: arm64: Don't read a HW interrupt pending state in user context
	KVM: x86: Account a variety of miscellaneous allocations
	KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
	ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machine
	virtio-pci: Remove wrong address verification in vp_del_vqs()
	dma-direct: don't over-decrypt memory
	net/sched: act_police: more accurate MTU policing
	net: openvswitch: fix misuse of the cached connection on tuple changes
	Revert "PCI: Make pci_enable_ptm() private"
	igc: Enable PCIe PTM
	powerpc/book3e: get rid of #include <generated/compile.h>
	clk: imx8mp: fix usb_root_clk parent
	Linux 5.10.124

Signed-off-by: Greg Kroah-Hartman <[email protected]>
Change-Id: I987dc63a8a51c3310ee3a28be855ed9cb0e3d9b4
tree: 4fee1d5a034035a96eb9fbac5decf3f3657f8be4
  1. android/
  2. arch/
  3. block/
  4. certs/
  5. crypto/
  6. Documentation/
  7. drivers/
  8. fs/
  9. include/
  10. init/
  11. ipc/
  12. kernel/
  13. lib/
  14. LICENSES/
  15. mm/
  16. net/
  17. samples/
  18. scripts/
  19. security/
  20. sound/
  21. tools/
  22. usr/
  23. virt/
  24. .clang-format
  25. .cocciconfig
  26. .get_maintainer.ignore
  27. .gitattributes
  28. .gitignore
  29. .mailmap
  30. BUILD.bazel
  31. build.config.aarch64
  32. build.config.allmodconfig
  33. build.config.allmodconfig.aarch64
  34. build.config.allmodconfig.arm
  35. build.config.allmodconfig.x86_64
  36. build.config.amlogic
  37. build.config.arm
  38. build.config.common
  39. build.config.constants
  40. build.config.db845c
  41. build.config.gki
  42. build.config.gki-debug.aarch64
  43. build.config.gki-debug.x86_64
  44. build.config.gki.aarch64
  45. build.config.gki.aarch64.fips140
  46. build.config.gki.x86_64
  47. build.config.gki_kasan
  48. build.config.gki_kasan.aarch64
  49. build.config.gki_kasan.x86_64
  50. build.config.gki_kprobes
  51. build.config.gki_kprobes.aarch64
  52. build.config.gki_kprobes.x86_64
  53. build.config.hikey960
  54. build.config.khwasan
  55. build.config.rockpi4
  56. build.config.x86_64
  57. COPYING
  58. CREDITS
  59. Kbuild
  60. Kconfig
  61. MAINTAINERS
  62. Makefile
  63. OWNERS
  64. README
  65. README.md
README.md

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

    • Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux, additions of EXPORT_SYMBOL_GPL() require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export.
    • When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with [email protected]. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass script/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry picked from commit ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <[email protected]>
  • then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <[email protected]>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <[email protected]>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry picked from commit ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <[email protected]>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [joe: Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <[email protected]>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <[email protected]>
  • then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <[email protected]>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <[email protected]>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • add a Bug: tag with the Android bug (required for patches not accepted into a maintainer tree)
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <[email protected]>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/[email protected]/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <[email protected]>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <[email protected]>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)