diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index f13346b..3e40323 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -468,10 +468,6 @@
 	u8 possible_phymodes;
 	/* GMODE bit enabled? */
 	bool gmode;
-	/* Possible ieee80211 subsystem hwmodes for this PHY.
-	 * Which mode is selected, depends on thr GMODE enabled bit */
-#define B43_MAX_PHYHWMODES	2
-	struct ieee80211_hw_mode hwmodes[B43_MAX_PHYHWMODES];
 
 	/* Analog Type */
 	u8 analog;
@@ -727,7 +723,6 @@
 
 	bool bad_frames_preempt;	/* Use "Bad Frames Preemption" (default off) */
 	bool dfq_valid;		/* Directed frame queue valid (IBSS PS mode, ATIM) */
-	bool short_preamble;	/* TRUE, if short preamble is enabled. */
 	bool short_slot;	/* TRUE, if short slot timing is enabled. */
 	bool radio_hw_enable;	/* saved state of radio hardware enabled state */
 	bool suspend_in_progress;	/* TRUE, if we are in a suspend/resume cycle */
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 51dfce1..017a041 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -96,25 +96,29 @@
  * data in there. This data is the same for all devices, so we don't
  * get concurrency issues */
 #define RATETAB_ENT(_rateid, _flags) \
-	{							\
-		.rate	= B43_RATE_TO_BASE100KBPS(_rateid),	\
-		.val	= (_rateid),				\
-		.val2	= (_rateid),				\
-		.flags	= (_flags),				\
+	{								\
+		.bitrate	= B43_RATE_TO_BASE100KBPS(_rateid),	\
+		.hw_value	= (_rateid),				\
+		.flags		= (_flags),				\
 	}
+
+/*
+ * NOTE: When changing this, sync with xmit.c's
+ *	 b43_plcp_get_bitrate_idx_* functions!
+ */
 static struct ieee80211_rate __b43_ratetable[] = {
-	RATETAB_ENT(B43_CCK_RATE_1MB, IEEE80211_RATE_CCK),
-	RATETAB_ENT(B43_CCK_RATE_2MB, IEEE80211_RATE_CCK_2),
-	RATETAB_ENT(B43_CCK_RATE_5MB, IEEE80211_RATE_CCK_2),
-	RATETAB_ENT(B43_CCK_RATE_11MB, IEEE80211_RATE_CCK_2),
-	RATETAB_ENT(B43_OFDM_RATE_6MB, IEEE80211_RATE_OFDM),
-	RATETAB_ENT(B43_OFDM_RATE_9MB, IEEE80211_RATE_OFDM),
-	RATETAB_ENT(B43_OFDM_RATE_12MB, IEEE80211_RATE_OFDM),
-	RATETAB_ENT(B43_OFDM_RATE_18MB, IEEE80211_RATE_OFDM),
-	RATETAB_ENT(B43_OFDM_RATE_24MB, IEEE80211_RATE_OFDM),
-	RATETAB_ENT(B43_OFDM_RATE_36MB, IEEE80211_RATE_OFDM),
-	RATETAB_ENT(B43_OFDM_RATE_48MB, IEEE80211_RATE_OFDM),
-	RATETAB_ENT(B43_OFDM_RATE_54MB, IEEE80211_RATE_OFDM),
+	RATETAB_ENT(B43_CCK_RATE_1MB, 0),
+	RATETAB_ENT(B43_CCK_RATE_2MB, IEEE80211_RATE_SHORT_PREAMBLE),
+	RATETAB_ENT(B43_CCK_RATE_5MB, IEEE80211_RATE_SHORT_PREAMBLE),
+	RATETAB_ENT(B43_CCK_RATE_11MB, IEEE80211_RATE_SHORT_PREAMBLE),
+	RATETAB_ENT(B43_OFDM_RATE_6MB, 0),
+	RATETAB_ENT(B43_OFDM_RATE_9MB, 0),
+	RATETAB_ENT(B43_OFDM_RATE_12MB, 0),
+	RATETAB_ENT(B43_OFDM_RATE_18MB, 0),
+	RATETAB_ENT(B43_OFDM_RATE_24MB, 0),
+	RATETAB_ENT(B43_OFDM_RATE_36MB, 0),
+	RATETAB_ENT(B43_OFDM_RATE_48MB, 0),
+	RATETAB_ENT(B43_OFDM_RATE_54MB, 0),
 };
 
 #define b43_a_ratetable		(__b43_ratetable + 4)
@@ -126,14 +130,8 @@
 
 #define CHANTAB_ENT(_chanid, _freq) \
 	{							\
-		.chan	= (_chanid),				\
-		.freq	= (_freq),				\
-		.val	= (_chanid),				\
-		.flag	= IEEE80211_CHAN_W_SCAN |		\
-			  IEEE80211_CHAN_W_ACTIVE_SCAN |	\
-			  IEEE80211_CHAN_W_IBSS,		\
-		.power_level	= 0xFF,				\
-		.antenna_max	= 0xFF,				\
+		.center_freq	= (_freq),			\
+		.hw_value	= (_chanid),			\
 	}
 static struct ieee80211_channel b43_2ghz_chantable[] = {
 	CHANTAB_ENT(1, 2412),
@@ -151,9 +149,8 @@
 	CHANTAB_ENT(13, 2472),
 	CHANTAB_ENT(14, 2484),
 };
-#define b43_2ghz_chantable_size	ARRAY_SIZE(b43_2ghz_chantable)
 
-#if 0
+#ifdef NOTYET
 static struct ieee80211_channel b43_5ghz_chantable[] = {
 	CHANTAB_ENT(36, 5180),
 	CHANTAB_ENT(40, 5200),
@@ -169,9 +166,22 @@
 	CHANTAB_ENT(161, 5805),
 	CHANTAB_ENT(165, 5825),
 };
-#define b43_5ghz_chantable_size	ARRAY_SIZE(b43_5ghz_chantable)
+
+static struct ieee80211_supported_band b43_band_5GHz = {
+	.channels = b43_5ghz_chantable,
+	.n_channels = ARRAY_SIZE(b43_5ghz_chantable),
+	.bitrates = b43_a_ratetable,
+	.n_bitrates = b43_a_ratetable_size,
+};
 #endif
 
+static struct ieee80211_supported_band b43_band_2GHz = {
+	.channels = b43_2ghz_chantable,
+	.n_channels = ARRAY_SIZE(b43_2ghz_chantable),
+	.bitrates = b43_g_ratetable,
+	.n_bitrates = b43_g_ratetable_size,
+};
+
 static void b43_wireless_core_exit(struct b43_wldev *dev);
 static int b43_wireless_core_init(struct b43_wldev *dev);
 static void b43_wireless_core_stop(struct b43_wldev *dev);
@@ -1222,17 +1232,18 @@
 }
 
 static void b43_write_probe_resp_plcp(struct b43_wldev *dev,
-				      u16 shm_offset, u16 size, u8 rate)
+				      u16 shm_offset, u16 size,
+				      struct ieee80211_rate *rate)
 {
 	struct b43_plcp_hdr4 plcp;
 	u32 tmp;
 	__le16 dur;
 
 	plcp.data = 0;
-	b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate);
+	b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate->hw_value);
 	dur = ieee80211_generic_frame_duration(dev->wl->hw,
 					       dev->wl->vif, size,
-					       B43_RATE_TO_BASE100KBPS(rate));
+					       rate);
 	/* Write PLCP in two parts and timing for packet transfer */
 	tmp = le32_to_cpu(plcp.data);
 	b43_shm_write16(dev, B43_SHM_SHARED, shm_offset, tmp & 0xFFFF);
@@ -1247,7 +1258,8 @@
  * 3) Stripping TIM
  */
 static const u8 * b43_generate_probe_resp(struct b43_wldev *dev,
-					  u16 *dest_size, u8 rate)
+					  u16 *dest_size,
+					  struct ieee80211_rate *rate)
 {
 	const u8 *src_data;
 	u8 *dest_data;
@@ -1292,7 +1304,7 @@
 					 IEEE80211_STYPE_PROBE_RESP);
 	dur = ieee80211_generic_frame_duration(dev->wl->hw,
 					       dev->wl->vif, *dest_size,
-					       B43_RATE_TO_BASE100KBPS(rate));
+					       rate);
 	hdr->duration_id = dur;
 
 	return dest_data;
@@ -1300,7 +1312,8 @@
 
 static void b43_write_probe_resp_template(struct b43_wldev *dev,
 					  u16 ram_offset,
-					  u16 shm_size_offset, u8 rate)
+					  u16 shm_size_offset,
+					  struct ieee80211_rate *rate)
 {
 	const u8 *probe_resp_data;
 	u16 size;
@@ -1313,14 +1326,15 @@
 	/* Looks like PLCP headers plus packet timings are stored for
 	 * all possible basic rates
 	 */
-	b43_write_probe_resp_plcp(dev, 0x31A, size, B43_CCK_RATE_1MB);
-	b43_write_probe_resp_plcp(dev, 0x32C, size, B43_CCK_RATE_2MB);
-	b43_write_probe_resp_plcp(dev, 0x33E, size, B43_CCK_RATE_5MB);
-	b43_write_probe_resp_plcp(dev, 0x350, size, B43_CCK_RATE_11MB);
+	b43_write_probe_resp_plcp(dev, 0x31A, size, &b43_b_ratetable[0]);
+	b43_write_probe_resp_plcp(dev, 0x32C, size, &b43_b_ratetable[1]);
+	b43_write_probe_resp_plcp(dev, 0x33E, size, &b43_b_ratetable[2]);
+	b43_write_probe_resp_plcp(dev, 0x350, size, &b43_b_ratetable[3]);
 
 	size = min((size_t) size, 0x200 - sizeof(struct b43_plcp_hdr6));
 	b43_write_template_common(dev, probe_resp_data,
-				  size, ram_offset, shm_size_offset, rate);
+				  size, ram_offset, shm_size_offset,
+				  rate->hw_value);
 	kfree(probe_resp_data);
 }
 
@@ -1388,7 +1402,7 @@
 			b43_write_beacon_template(dev, 0x68, 0x18,
 						  B43_CCK_RATE_1MB);
 			b43_write_probe_resp_template(dev, 0x268, 0x4A,
-						      B43_CCK_RATE_11MB);
+						      &__b43_ratetable[3]);
 			wl->beacon0_uploaded = 1;
 		}
 		cmd |= B43_MACCMD_BEACON0_VALID;
@@ -2830,14 +2844,11 @@
 	mutex_lock(&wl->mutex);
 
 	/* Switch the PHY mode (if necessary). */
-	switch (conf->phymode) {
-	case MODE_IEEE80211A:
+	switch (conf->channel->band) {
+	case IEEE80211_BAND_5GHZ:
 		new_phymode = B43_PHYMODE_A;
 		break;
-	case MODE_IEEE80211B:
-		new_phymode = B43_PHYMODE_B;
-		break;
-	case MODE_IEEE80211G:
+	case IEEE80211_BAND_2GHZ:
 		new_phymode = B43_PHYMODE_G;
 		break;
 	default:
@@ -2863,8 +2874,8 @@
 
 	/* Switch to the requested channel.
 	 * The firmware takes care of races with the TX handler. */
-	if (conf->channel_val != phy->channel)
-		b43_radio_selectchannel(dev, conf->channel_val, 0);
+	if (conf->channel->hw_value != phy->channel)
+		b43_radio_selectchannel(dev, conf->channel->hw_value, 0);
 
 	/* Enable/Disable ShortSlot timing. */
 	if ((!!(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME)) !=
@@ -3810,9 +3821,7 @@
 			   bool have_2ghz_phy, bool have_5ghz_phy)
 {
 	struct ieee80211_hw *hw = dev->wl->hw;
-	struct ieee80211_hw_mode *mode;
 	struct b43_phy *phy = &dev->phy;
-	int err;
 
 	/* XXX: This function will go away soon, when mac80211
 	 *      band stuff is rewritten. So this is just a hack.
@@ -3821,15 +3830,7 @@
 	 *      This assumption is OK, as any B, N or A PHY will already
 	 *      have died a horrible sanity check death earlier. */
 
-	mode = &phy->hwmodes[0];
-	mode->mode = MODE_IEEE80211G;
-	mode->num_channels = b43_2ghz_chantable_size;
-	mode->channels = b43_2ghz_chantable;
-	mode->num_rates = b43_g_ratetable_size;
-	mode->rates = b43_g_ratetable;
-	err = ieee80211_register_hwmode(hw, mode);
-	if (err)
-		return err;
+	hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &b43_band_2GHz;
 	phy->possible_phymodes |= B43_PHYMODE_G;
 
 	return 0;
diff --git a/drivers/net/wireless/b43/sysfs.c b/drivers/net/wireless/b43/sysfs.c
index f4faff6..275095b 100644
--- a/drivers/net/wireless/b43/sysfs.c
+++ b/drivers/net/wireless/b43/sysfs.c
@@ -47,29 +47,6 @@
 	return ret;
 }
 
-static int get_boolean(const char *buf, size_t count)
-{
-	if (count != 0) {
-		if (buf[0] == '1')
-			return 1;
-		if (buf[0] == '0')
-			return 0;
-		if (count >= 4 && memcmp(buf, "true", 4) == 0)
-			return 1;
-		if (count >= 5 && memcmp(buf, "false", 5) == 0)
-			return 0;
-		if (count >= 3 && memcmp(buf, "yes", 3) == 0)
-			return 1;
-		if (count >= 2 && memcmp(buf, "no", 2) == 0)
-			return 0;
-		if (count >= 2 && memcmp(buf, "on", 2) == 0)
-			return 1;
-		if (count >= 3 && memcmp(buf, "off", 3) == 0)
-			return 0;
-	}
-	return -EINVAL;
-}
-
 static ssize_t b43_attr_interfmode_show(struct device *dev,
 					struct device_attribute *attr,
 					char *buf)
@@ -155,82 +132,18 @@
 static DEVICE_ATTR(interference, 0644,
 		   b43_attr_interfmode_show, b43_attr_interfmode_store);
 
-static ssize_t b43_attr_preamble_show(struct device *dev,
-				      struct device_attribute *attr, char *buf)
-{
-	struct b43_wldev *wldev = dev_to_b43_wldev(dev);
-	ssize_t count;
-
-	if (!capable(CAP_NET_ADMIN))
-		return -EPERM;
-
-	mutex_lock(&wldev->wl->mutex);
-
-	if (wldev->short_preamble)
-		count =
-		    snprintf(buf, PAGE_SIZE, "1 (Short Preamble enabled)\n");
-	else
-		count =
-		    snprintf(buf, PAGE_SIZE, "0 (Short Preamble disabled)\n");
-
-	mutex_unlock(&wldev->wl->mutex);
-
-	return count;
-}
-
-static ssize_t b43_attr_preamble_store(struct device *dev,
-				       struct device_attribute *attr,
-				       const char *buf, size_t count)
-{
-	struct b43_wldev *wldev = dev_to_b43_wldev(dev);
-	unsigned long flags;
-	int value;
-
-	if (!capable(CAP_NET_ADMIN))
-		return -EPERM;
-
-	value = get_boolean(buf, count);
-	if (value < 0)
-		return value;
-	mutex_lock(&wldev->wl->mutex);
-	spin_lock_irqsave(&wldev->wl->irq_lock, flags);
-
-	wldev->short_preamble = !!value;
-
-	spin_unlock_irqrestore(&wldev->wl->irq_lock, flags);
-	mutex_unlock(&wldev->wl->mutex);
-
-	return count;
-}
-
-static DEVICE_ATTR(shortpreamble, 0644,
-		   b43_attr_preamble_show, b43_attr_preamble_store);
-
 int b43_sysfs_register(struct b43_wldev *wldev)
 {
 	struct device *dev = wldev->dev->dev;
-	int err;
 
 	B43_WARN_ON(b43_status(wldev) != B43_STAT_INITIALIZED);
 
-	err = device_create_file(dev, &dev_attr_interference);
-	if (err)
-		goto out;
-	err = device_create_file(dev, &dev_attr_shortpreamble);
-	if (err)
-		goto err_remove_interfmode;
-
-      out:
-	return err;
-      err_remove_interfmode:
-	device_remove_file(dev, &dev_attr_interference);
-	goto out;
+	return device_create_file(dev, &dev_attr_interference);
 }
 
 void b43_sysfs_unregister(struct b43_wldev *wldev)
 {
 	struct device *dev = wldev->dev->dev;
 
-	device_remove_file(dev, &dev_attr_shortpreamble);
 	device_remove_file(dev, &dev_attr_interference);
 }
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index 7caa26e..4014b6c 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -32,46 +32,48 @@
 #include "dma.h"
 
 
-/* Extract the bitrate out of a CCK PLCP header. */
-static u8 b43_plcp_get_bitrate_cck(struct b43_plcp_hdr6 *plcp)
+/* Extract the bitrate index out of a CCK PLCP header. */
+static int b43_plcp_get_bitrate_idx_cck(struct b43_plcp_hdr6 *plcp)
 {
 	switch (plcp->raw[0]) {
 	case 0x0A:
-		return B43_CCK_RATE_1MB;
+		return 0;
 	case 0x14:
-		return B43_CCK_RATE_2MB;
+		return 1;
 	case 0x37:
-		return B43_CCK_RATE_5MB;
+		return 2;
 	case 0x6E:
-		return B43_CCK_RATE_11MB;
+		return 3;
 	}
 	B43_WARN_ON(1);
-	return 0;
+	return -1;
 }
 
-/* Extract the bitrate out of an OFDM PLCP header. */
-static u8 b43_plcp_get_bitrate_ofdm(struct b43_plcp_hdr6 *plcp)
+/* Extract the bitrate index out of an OFDM PLCP header. */
+static u8 b43_plcp_get_bitrate_idx_ofdm(struct b43_plcp_hdr6 *plcp, bool aphy)
 {
+	int base = aphy ? 0 : 4;
+
 	switch (plcp->raw[0] & 0xF) {
 	case 0xB:
-		return B43_OFDM_RATE_6MB;
+		return base + 0;
 	case 0xF:
-		return B43_OFDM_RATE_9MB;
+		return base + 1;
 	case 0xA:
-		return B43_OFDM_RATE_12MB;
+		return base + 2;
 	case 0xE:
-		return B43_OFDM_RATE_18MB;
+		return base + 3;
 	case 0x9:
-		return B43_OFDM_RATE_24MB;
+		return base + 4;
 	case 0xD:
-		return B43_OFDM_RATE_36MB;
+		return base + 5;
 	case 0x8:
-		return B43_OFDM_RATE_48MB;
+		return base + 6;
 	case 0xC:
-		return B43_OFDM_RATE_54MB;
+		return base + 7;
 	}
 	B43_WARN_ON(1);
-	return 0;
+	return -1;
 }
 
 u8 b43_plcp_get_ratecode_cck(const u8 bitrate)
@@ -191,6 +193,7 @@
 	    (const struct ieee80211_hdr *)fragment_data;
 	int use_encryption = (!(txctl->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT));
 	u16 fctl = le16_to_cpu(wlhdr->frame_control);
+	struct ieee80211_rate *fbrate;
 	u8 rate, rate_fb;
 	int rate_ofdm, rate_fb_ofdm;
 	unsigned int plcp_fragment_len;
@@ -200,9 +203,11 @@
 
 	memset(txhdr, 0, sizeof(*txhdr));
 
-	rate = txctl->tx_rate;
+	WARN_ON(!txctl->tx_rate);
+	rate = txctl->tx_rate ? txctl->tx_rate->hw_value : B43_CCK_RATE_1MB;
 	rate_ofdm = b43_is_ofdm_rate(rate);
-	rate_fb = (txctl->alt_retry_rate == -1) ? rate : txctl->alt_retry_rate;
+	fbrate = txctl->alt_retry_rate ? : txctl->tx_rate;
+	rate_fb = fbrate->hw_value;
 	rate_fb_ofdm = b43_is_ofdm_rate(rate_fb);
 
 	if (rate_ofdm)
@@ -221,11 +226,10 @@
 		 * use the original dur_id field. */
 		txhdr->dur_fb = wlhdr->duration_id;
 	} else {
-		int fbrate_base100kbps = B43_RATE_TO_BASE100KBPS(rate_fb);
 		txhdr->dur_fb = ieee80211_generic_frame_duration(dev->wl->hw,
 								 txctl->vif,
 								 fragment_len,
-								 fbrate_base100kbps);
+								 fbrate);
 	}
 
 	plcp_fragment_len = fragment_len + FCS_LEN;
@@ -287,7 +291,7 @@
 		phy_ctl |= B43_TXH_PHY_ENC_OFDM;
 	else
 		phy_ctl |= B43_TXH_PHY_ENC_CCK;
-	if (dev->short_preamble)
+	if (txctl->flags & IEEE80211_TXCTL_SHORT_PREAMBLE)
 		phy_ctl |= B43_TXH_PHY_SHORTPRMBL;
 
 	switch (b43_ieee80211_antenna_sanitize(dev, txctl->antenna_sel_tx)) {
@@ -332,7 +336,8 @@
 		int rts_rate_ofdm, rts_rate_fb_ofdm;
 		struct b43_plcp_hdr6 *plcp;
 
-		rts_rate = txctl->rts_cts_rate;
+		WARN_ON(!txctl->rts_cts_rate);
+		rts_rate = txctl->rts_cts_rate ? txctl->rts_cts_rate->hw_value : B43_CCK_RATE_1MB;
 		rts_rate_ofdm = b43_is_ofdm_rate(rts_rate);
 		rts_rate_fb = b43_calc_fallback_rate(rts_rate);
 		rts_rate_fb_ofdm = b43_is_ofdm_rate(rts_rate_fb);
@@ -506,6 +511,7 @@
 	u16 phystat0, phystat3, chanstat, mactime;
 	u32 macstat;
 	u16 chanid;
+	u16 phytype;
 	u8 jssi;
 	int padding;
 
@@ -518,6 +524,7 @@
 	macstat = le32_to_cpu(rxhdr->mac_status);
 	mactime = le16_to_cpu(rxhdr->mac_time);
 	chanstat = le16_to_cpu(rxhdr->channel);
+	phytype = chanstat & B43_RX_CHAN_PHYTYPE;
 
 	if (macstat & B43_RX_MAC_FCSERR)
 		dev->wl->ieee_stats.dot11FCSErrorCount++;
@@ -575,9 +582,10 @@
 	/* the next line looks wrong, but is what mac80211 wants */
 	status.signal = (jssi * 100) / B43_RX_MAX_SSI;
 	if (phystat0 & B43_RX_PHYST0_OFDM)
-		status.rate = b43_plcp_get_bitrate_ofdm(plcp);
+		status.rate_idx = b43_plcp_get_bitrate_idx_ofdm(plcp,
+						phytype == B43_PHYTYPE_A);
 	else
-		status.rate = b43_plcp_get_bitrate_cck(plcp);
+		status.rate_idx = b43_plcp_get_bitrate_idx_cck(plcp);
 	status.antenna = !!(phystat0 & B43_RX_PHYST0_ANT);
 
 	/*
@@ -601,29 +609,28 @@
 	chanid = (chanstat & B43_RX_CHAN_ID) >> B43_RX_CHAN_ID_SHIFT;
 	switch (chanstat & B43_RX_CHAN_PHYTYPE) {
 	case B43_PHYTYPE_A:
-		status.phymode = MODE_IEEE80211A;
+		status.band = IEEE80211_BAND_5GHZ;
 		B43_WARN_ON(1);
 		/* FIXME: We don't really know which value the "chanid" contains.
 		 *        So the following assignment might be wrong. */
-		status.channel = chanid;
-		status.freq = b43_channel_to_freq_5ghz(status.channel);
+		status.freq = b43_channel_to_freq_5ghz(chanid);
 		break;
 	case B43_PHYTYPE_G:
-		status.phymode = MODE_IEEE80211G;
+		status.band = IEEE80211_BAND_2GHZ;
 		/* chanid is the radio channel cookie value as used
 		 * to tune the radio. */
 		status.freq = chanid + 2400;
-		status.channel = b43_freq_to_channel_2ghz(status.freq);
 		break;
 	case B43_PHYTYPE_N:
-		status.phymode = 0xDEAD /*FIXME MODE_IEEE80211N*/;
 		/* chanid is the SHM channel cookie. Which is the plain
 		 * channel number in b43. */
-		status.channel = chanid;
-		if (chanstat & B43_RX_CHAN_5GHZ)
-			status.freq = b43_freq_to_channel_5ghz(status.freq);
-		else
-			status.freq = b43_freq_to_channel_2ghz(status.freq);
+		if (chanstat & B43_RX_CHAN_5GHZ) {
+			status.band = IEEE80211_BAND_5GHZ;
+			status.freq = b43_freq_to_channel_5ghz(chanid);
+		} else {
+			status.band = IEEE80211_BAND_2GHZ;
+			status.freq = b43_freq_to_channel_2ghz(chanid);
+		}
 		break;
 	default:
 		B43_WARN_ON(1);