diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 4f32b8a..6f946fe 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -21,6 +21,7 @@
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
+#include <linux/of_net.h>
 #include <net/dsa.h>
 #include <linux/ethtool.h>
 #include <linux/if_bridge.h>
@@ -266,6 +267,50 @@
 	}
 }
 
+static inline void bcm_sf2_port_intr_enable(struct bcm_sf2_priv *priv,
+					    int port)
+{
+	unsigned int off;
+
+	switch (port) {
+	case 7:
+		off = P7_IRQ_OFF;
+		break;
+	case 0:
+		/* Port 0 interrupts are located on the first bank */
+		intrl2_0_mask_clear(priv, P_IRQ_MASK(P0_IRQ_OFF));
+		return;
+	default:
+		off = P_IRQ_OFF(port);
+		break;
+	}
+
+	intrl2_1_mask_clear(priv, P_IRQ_MASK(off));
+}
+
+static inline void bcm_sf2_port_intr_disable(struct bcm_sf2_priv *priv,
+					     int port)
+{
+	unsigned int off;
+
+	switch (port) {
+	case 7:
+		off = P7_IRQ_OFF;
+		break;
+	case 0:
+		/* Port 0 interrupts are located on the first bank */
+		intrl2_0_mask_set(priv, P_IRQ_MASK(P0_IRQ_OFF));
+		intrl2_0_writel(priv, P_IRQ_MASK(P0_IRQ_OFF), INTRL2_CPU_CLEAR);
+		return;
+	default:
+		off = P_IRQ_OFF(port);
+		break;
+	}
+
+	intrl2_1_mask_set(priv, P_IRQ_MASK(off));
+	intrl2_1_writel(priv, P_IRQ_MASK(off), INTRL2_CPU_CLEAR);
+}
+
 static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
 			      struct phy_device *phy)
 {
@@ -282,7 +327,7 @@
 	core_writel(priv, 0, CORE_G_PCTL_PORT(port));
 
 	/* Re-enable the GPHY and re-apply workarounds */
-	if (port == 0 && priv->hw_params.num_gphy == 1) {
+	if (priv->int_phy_mask & 1 << port && priv->hw_params.num_gphy == 1) {
 		bcm_sf2_gphy_enable_set(ds, true);
 		if (phy) {
 			/* if phy_stop() has been called before, phy
@@ -299,9 +344,9 @@
 		}
 	}
 
-	/* Enable port 7 interrupts to get notified */
-	if (port == 7)
-		intrl2_1_mask_clear(priv, P_IRQ_MASK(P7_IRQ_OFF));
+	/* Enable MoCA port interrupts to get notified */
+	if (port == priv->moca_port)
+		bcm_sf2_port_intr_enable(priv, port);
 
 	/* Set this port, and only this one to be in the default VLAN,
 	 * if member of a bridge, restore its membership prior to
@@ -331,12 +376,10 @@
 	if (priv->wol_ports_mask & (1 << port))
 		return;
 
-	if (port == 7) {
-		intrl2_1_mask_set(priv, P_IRQ_MASK(P7_IRQ_OFF));
-		intrl2_1_writel(priv, P_IRQ_MASK(P7_IRQ_OFF), INTRL2_CPU_CLEAR);
-	}
+	if (port == priv->moca_port)
+		bcm_sf2_port_intr_disable(priv, port);
 
-	if (port == 0 && priv->hw_params.num_gphy == 1)
+	if (priv->int_phy_mask & 1 << port && priv->hw_params.num_gphy == 1)
 		bcm_sf2_gphy_enable_set(ds, false);
 
 	if (dsa_is_cpu_port(ds, port))
@@ -847,6 +890,42 @@
 	intrl2_1_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
 }
 
+static void bcm_sf2_identify_ports(struct bcm_sf2_priv *priv,
+				   struct device_node *dn)
+{
+	struct device_node *port;
+	const char *phy_mode_str;
+	int mode;
+	unsigned int port_num;
+	int ret;
+
+	priv->moca_port = -1;
+
+	for_each_available_child_of_node(dn, port) {
+		if (of_property_read_u32(port, "reg", &port_num))
+			continue;
+
+		/* Internal PHYs get assigned a specific 'phy-mode' property
+		 * value: "internal" to help flag them before MDIO probing
+		 * has completed, since they might be turned off at that
+		 * time
+		 */
+		mode = of_get_phy_mode(port);
+		if (mode < 0) {
+			ret = of_property_read_string(port, "phy-mode",
+						      &phy_mode_str);
+			if (ret < 0)
+				continue;
+
+			if (!strcasecmp(phy_mode_str, "internal"))
+				priv->int_phy_mask |= 1 << port_num;
+		}
+
+		if (mode == PHY_INTERFACE_MODE_MOCA)
+			priv->moca_port = port_num;
+	}
+}
+
 static int bcm_sf2_sw_setup(struct dsa_switch *ds)
 {
 	const char *reg_names[BCM_SF2_REGS_NUM] = BCM_SF2_REGS_NAME;
@@ -865,6 +944,7 @@
 	 * level
 	 */
 	dn = ds->pd->of_node->parent;
+	bcm_sf2_identify_ports(priv, ds->pd->of_node);
 
 	priv->irq0 = irq_of_parse_and_map(dn, 0);
 	priv->irq1 = irq_of_parse_and_map(dn, 1);
@@ -1145,7 +1225,7 @@
 
 	status->link = 0;
 
-	/* Port 7 is special as we do not get link status from CORE_LNKSTS,
+	/* MoCA port is special as we do not get link status from CORE_LNKSTS,
 	 * which means that we need to force the link at the port override
 	 * level to get the data to flow. We do use what the interrupt handler
 	 * did determine before.
@@ -1153,7 +1233,7 @@
 	 * For the other ports, we just force the link status, since this is
 	 * a fixed PHY device.
 	 */
-	if (port == 7) {
+	if (port == priv->moca_port) {
 		status->link = priv->port_sts[port].link;
 		/* For MoCA interfaces, also force a link down notification
 		 * since some version of the user-space daemon (mocad) use
diff --git a/drivers/net/dsa/bcm_sf2.h b/drivers/net/dsa/bcm_sf2.h
index cc98abc0..6bba1c9 100644
--- a/drivers/net/dsa/bcm_sf2.h
+++ b/drivers/net/dsa/bcm_sf2.h
@@ -134,6 +134,12 @@
 
 	/* Mask of ports enabled for Wake-on-LAN */
 	u32				wol_ports_mask;
+
+	/* MoCA port location */
+	int				moca_port;
+
+	/* Bitmask of ports having an integrated PHY */
+	unsigned int			int_phy_mask;
 };
 
 struct bcm_sf2_hw_stats {