media: lirc: implement scancode sending
This introduces a new lirc mode: scancode. Any device which can send raw IR
can now also send scancodes.
int main()
{
int mode, fd = open("/dev/lirc0", O_RDWR);
mode = LIRC_MODE_SCANCODE;
if (ioctl(fd, LIRC_SET_SEND_MODE, &mode)) {
// kernel too old or lirc does not support transmit
}
struct lirc_scancode scancode = {
.scancode = 0x1e3d,
.rc_proto = RC_PROTO_RC5,
};
write(fd, &scancode, sizeof(scancode));
close(fd);
}
The other fields of lirc_scancode must be set to 0.
Note that toggle (rc5, rc6) and repeats (nec) are not implemented. Nor is
there a method for holding down a key for a period.
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index 72197cb..7046734 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -10,59 +10,7 @@
*/
#include <linux/input.h>
-
-/**
- * enum rc_proto - the Remote Controller protocol
- *
- * @RC_PROTO_UNKNOWN: Protocol not known
- * @RC_PROTO_OTHER: Protocol known but proprietary
- * @RC_PROTO_RC5: Philips RC5 protocol
- * @RC_PROTO_RC5X_20: Philips RC5x 20 bit protocol
- * @RC_PROTO_RC5_SZ: StreamZap variant of RC5
- * @RC_PROTO_JVC: JVC protocol
- * @RC_PROTO_SONY12: Sony 12 bit protocol
- * @RC_PROTO_SONY15: Sony 15 bit protocol
- * @RC_PROTO_SONY20: Sony 20 bit protocol
- * @RC_PROTO_NEC: NEC protocol
- * @RC_PROTO_NECX: Extended NEC protocol
- * @RC_PROTO_NEC32: NEC 32 bit protocol
- * @RC_PROTO_SANYO: Sanyo protocol
- * @RC_PROTO_MCIR2_KBD: RC6-ish MCE keyboard
- * @RC_PROTO_MCIR2_MSE: RC6-ish MCE mouse
- * @RC_PROTO_RC6_0: Philips RC6-0-16 protocol
- * @RC_PROTO_RC6_6A_20: Philips RC6-6A-20 protocol
- * @RC_PROTO_RC6_6A_24: Philips RC6-6A-24 protocol
- * @RC_PROTO_RC6_6A_32: Philips RC6-6A-32 protocol
- * @RC_PROTO_RC6_MCE: MCE (Philips RC6-6A-32 subtype) protocol
- * @RC_PROTO_SHARP: Sharp protocol
- * @RC_PROTO_XMP: XMP protocol
- * @RC_PROTO_CEC: CEC protocol
- */
-enum rc_proto {
- RC_PROTO_UNKNOWN = 0,
- RC_PROTO_OTHER = 1,
- RC_PROTO_RC5 = 2,
- RC_PROTO_RC5X_20 = 3,
- RC_PROTO_RC5_SZ = 4,
- RC_PROTO_JVC = 5,
- RC_PROTO_SONY12 = 6,
- RC_PROTO_SONY15 = 7,
- RC_PROTO_SONY20 = 8,
- RC_PROTO_NEC = 9,
- RC_PROTO_NECX = 10,
- RC_PROTO_NEC32 = 11,
- RC_PROTO_SANYO = 12,
- RC_PROTO_MCIR2_KBD = 13,
- RC_PROTO_MCIR2_MSE = 14,
- RC_PROTO_RC6_0 = 15,
- RC_PROTO_RC6_6A_20 = 16,
- RC_PROTO_RC6_6A_24 = 17,
- RC_PROTO_RC6_6A_32 = 18,
- RC_PROTO_RC6_MCE = 19,
- RC_PROTO_SHARP = 20,
- RC_PROTO_XMP = 21,
- RC_PROTO_CEC = 22,
-};
+#include <uapi/linux/lirc.h>
#define RC_PROTO_BIT_NONE 0ULL
#define RC_PROTO_BIT_UNKNOWN BIT_ULL(RC_PROTO_UNKNOWN)
