diff --git a/Documentation/arm/IXP4xx b/Documentation/arm/IXP4xx
index 43edb4e..72fbcc4 100644
--- a/Documentation/arm/IXP4xx
+++ b/Documentation/arm/IXP4xx
@@ -32,7 +32,7 @@
 - Flash access (MTD/JFFS)
 - I2C through GPIO on IXP42x
 - GPIO for input/output/interrupts 
-  See include/asm-arm/arch-ixp4xx/platform.h for access functions.
+  See arch/arm/mach-ixp4xx/include/mach/platform.h for access functions.
 - Timers (watchdog, OS)
 
 The following components of the chips are not supported by Linux and
diff --git a/Documentation/arm/Interrupts b/Documentation/arm/Interrupts
index c202ed35..f09ab1b 100644
--- a/Documentation/arm/Interrupts
+++ b/Documentation/arm/Interrupts
@@ -158,7 +158,7 @@
    be re-checked for pending events.  (see the Neponset IRQ handler for
    details).
 
-7. fixup_irq() is gone, as is include/asm-arm/arch-*/irq.h
+7. fixup_irq() is gone, as is arch/arm/mach-*/include/mach/irq.h
 
 Please note that this will not solve all problems - some of them are
 hardware based.  Mixing level-based and edge-based IRQs on the same
diff --git a/Documentation/arm/README b/Documentation/arm/README
index 9b9c8226..d98783f 100644
--- a/Documentation/arm/README
+++ b/Documentation/arm/README
@@ -79,7 +79,7 @@
   To this end, we now have arch/arm/mach-$(MACHINE) directories which are
   designed to house the non-driver files for a particular machine (eg, PCI,
   memory management, architecture definitions etc).  For all future
-  machines, there should be a corresponding include/asm-arm/arch-$(MACHINE)
+  machines, there should be a corresponding arch/arm/mach-$(MACHINE)/include/mach
   directory.
 
 
@@ -176,7 +176,7 @@
   class typically based around one or more system on a chip devices, and
   acts as a natural container around the actual implementations.  These
   classes are given directories - arch/arm/mach-<class> and
-  include/asm-arm/arch-<class> - which contain the source files to
+  arch/arm/mach-<class> - which contain the source files to/include/mach
   support the machine class.  This directories also contain any machine
   specific supporting code.
 
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
index 8caea8c..b5d20c0 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
@@ -16,13 +16,13 @@
 Headers
 -------
 
-  See include/asm-arm/arch-s3c2410/regs-gpio.h for the list
+  See arch/arm/mach-s3c2410/include/mach/regs-gpio.h for the list
   of GPIO pins, and the configuration values for them. This
-  is included by using #include <asm/arch/regs-gpio.h>
+  is included by using #include <mach/regs-gpio.h>
 
   The GPIO management functions are defined in the hardware
-  header include/asm-arm/arch-s3c2410/hardware.h which can be
-  included by #include <asm/arch/hardware.h>
+  header arch/arm/mach-s3c2410/include/mach/hardware.h which can be
+  included by #include <mach/hardware.h>
 
   A useful amount of documentation can be found in the hardware
   header on how the GPIO functions (and others) work.
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index d04e1e3..014a8ec 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -36,7 +36,7 @@
   in arch/arm/mach-s3c2410 and S3C2440 in arch/arm/mach-s3c2440
 
   Register, kernel and platform data definitions are held in the
-  include/asm-arm/arch-s3c2410 directory.
+  arch/arm/mach-s3c2410 directory./include/mach
 
 
 Machines
diff --git a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
index b93b68e..67671eb 100644
--- a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
+++ b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
@@ -49,7 +49,7 @@
 Platform Data
 -------------
 
-  See linux/include/asm-arm/arch-s3c2410/usb-control.h for the
+  See arch/arm/mach-s3c2410/include/mach/usb-control.h for the
   descriptions of the platform device data. An implementation
   can be found in linux/arch/arm/mach-s3c2410/usb-simtec.c .
 
diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx
index f3853cc..bbe8dee 100644
--- a/Documentation/spi/pxa2xx
+++ b/Documentation/spi/pxa2xx
@@ -19,7 +19,7 @@
 -----------------------------------
 Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a
 "platform device".  The master configuration is passed to the driver via a table
-found in include/asm-arm/arch-pxa/pxa2xx_spi.h:
+found in arch/arm/mach-pxa/include/mach/pxa2xx_spi.h:
 
 struct pxa2xx_spi_master {
 	enum pxa_ssp_type ssp_type;
@@ -94,7 +94,7 @@
 
 Each slave device attached to the PXA must provide slave specific configuration
 information via the structure "pxa2xx_spi_chip" found in
-"include/asm-arm/arch-pxa/pxa2xx_spi.h".  The pxa2xx_spi master controller driver
+"arch/arm/mach-pxa/include/mach/pxa2xx_spi.h".  The pxa2xx_spi master controller driver
 will uses the configuration whenever the driver communicates with the slave
 device.
 
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index 6d5f1814..8bae2f0 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -210,7 +210,7 @@
 
 So for example arch/.../mach-*/board-*.c files might have code like:
 
-	#include <asm/arch/spi.h>	/* for mysoc_spi_data */
+	#include <mach/spi.h>	/* for mysoc_spi_data */
 
 	/* if your mach-* infrastructure doesn't support kernels that can
 	 * run on multiple boards, pdata wouldn't benefit from "__init".
@@ -227,7 +227,7 @@
 
 And SOC-specific utility code might look something like:
 
-	#include <asm/arch/spi.h>
+	#include <mach/spi.h>
 
 	static struct platform_device spi2 = { ... };
 
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 359d224c..703a44f 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -97,9 +97,7 @@
  machine-$(CONFIG_ARCH_RPC)	   := rpc
  machine-$(CONFIG_ARCH_EBSA110)	   := ebsa110
  machine-$(CONFIG_ARCH_CLPS7500)   := clps7500
-  incdir-$(CONFIG_ARCH_CLPS7500)   := cl7500
  machine-$(CONFIG_FOOTBRIDGE)	   := footbridge
-  incdir-$(CONFIG_FOOTBRIDGE)	   := ebsa285
  machine-$(CONFIG_ARCH_SHARK)	   := shark
  machine-$(CONFIG_ARCH_SA1100)	   := sa1100
 ifeq ($(CONFIG_ARCH_SA1100),y)
@@ -120,7 +118,6 @@
  machine-$(CONFIG_ARCH_IXP23XX)    := ixp23xx
  machine-$(CONFIG_ARCH_OMAP1)	   := omap1
  machine-$(CONFIG_ARCH_OMAP2)	   := omap2
-  incdir-$(CONFIG_ARCH_OMAP)	   := omap
     plat-$(CONFIG_ARCH_OMAP)	   := omap
  machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
     plat-$(CONFIG_PLAT_S3C24XX)	   := s3c24xx
@@ -138,7 +135,6 @@
  machine-$(CONFIG_ARCH_DAVINCI)	   := davinci
  machine-$(CONFIG_ARCH_KIRKWOOD)   := kirkwood
  machine-$(CONFIG_ARCH_KS8695)     := ks8695
-  incdir-$(CONFIG_ARCH_MXC)	   := mxc
     plat-$(CONFIG_ARCH_MXC)	   := mxc
  machine-$(CONFIG_ARCH_MX2)	   := mx2
  machine-$(CONFIG_ARCH_MX3)	   := mx3
@@ -158,11 +154,6 @@
 # The byte offset of the kernel image in RAM from the start of RAM.
 TEXT_OFFSET := $(textofs-y)
 
-ifeq ($(incdir-y),)
-incdir-y := $(word 1,$(machine-y))
-endif
-INCDIR   := arch-$(incdir-y)
-
 # The first directory contains additional information for the boot setup code
 ifneq ($(machine-y),)
 MACHINE  := arch/arm/mach-$(word 1,$(machine-y))/
@@ -213,20 +204,10 @@
 #	them changed.  We use .arch to indicate when they were updated
 #	last, otherwise make uses the target directory mtime.
 
-include/asm-arm/.arch: $(wildcard include/config/arch/*.h) include/config/auto.conf
-	@echo '  SYMLINK include/asm-arm/arch -> include/asm-arm/$(INCDIR)'
-ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p include/asm-arm
-	$(Q)ln -fsn $(srctree)/include/asm-arm/$(INCDIR) include/asm-arm/arch
-else
-	$(Q)ln -fsn $(INCDIR) include/asm-arm/arch
-endif
-	@touch $@
-
 archprepare: maketools
 
 PHONY += maketools FORCE
-maketools: include/linux/version.h include/asm-arm/.arch FORCE
+maketools: include/linux/version.h FORCE
 	$(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h
 
 # Convert bzImage to zImage
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index de41dae..d42f89b 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -37,7 +37,7 @@
 
 #else
 
-#include <asm/arch/debug-macro.S>
+#include <mach/debug-macro.S>
 
 		.macro	writeb,	ch, rb
 		senduart \ch, \rb
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 7145cc7..65ce8ff 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -27,7 +27,7 @@
 static void putstr(const char *ptr);
 
 #include <linux/compiler.h>
-#include <asm/arch/uncompress.h>
+#include <mach/uncompress.h>
 
 #ifdef CONFIG_DEBUG_ICEDCC
 
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 1f0f0ad..283051e 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -25,7 +25,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 64c328d..ec8a547 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -26,7 +26,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index a0d1540..db83091 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -26,12 +26,12 @@
 #include <linux/apm-emulation.h>
 #include <linux/suspend.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/sharpsl.h>
 #include <asm/hardware/sharpsl_pm.h>
 
 /*
diff --git a/arch/arm/common/time-acorn.c b/arch/arm/common/time-acorn.c
index af37bfd..df0983a 100644
--- a/arch/arm/common/time-acorn.c
+++ b/arch/arm/common/time-acorn.c
@@ -18,7 +18,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/hardware/ioc.h>
 
diff --git a/arch/arm/common/uengine.c b/arch/arm/common/uengine.c
index 3e19985..7ecd3c0 100644
--- a/arch/arm/common/uengine.c
+++ b/arch/arm/common/uengine.c
@@ -16,7 +16,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/string.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/uengine.h>
 #include <asm/io.h>
 
diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
index 9f2c530..75154b1 100644
--- a/arch/arm/include/asm/dma.h
+++ b/arch/arm/include/asm/dma.h
@@ -6,7 +6,7 @@
 #include <linux/spinlock.h>
 #include <asm/system.h>
 #include <asm/scatterlist.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 /*
  * This is the maximum virtual address which can be DMA'd from.
diff --git a/arch/arm/include/asm/floppy.h b/arch/arm/include/asm/floppy.h
index dce20c2..c9f03ec 100644
--- a/arch/arm/include/asm/floppy.h
+++ b/arch/arm/include/asm/floppy.h
@@ -12,7 +12,7 @@
 #ifndef __ASM_ARM_FLOPPY_H
 #define __ASM_ARM_FLOPPY_H
 #if 0
-#include <asm/arch/floppy.h>
+#include <mach/floppy.h>
 #endif
 
 #define fd_outb(val,port)			\
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index fff4f80..166a7a3 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -2,6 +2,6 @@
 #define _ARCH_ARM_GPIO_H
 
 /* not all ARM platforms necessarily support this API ... */
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 #endif /* _ARCH_ARM_GPIO_H */
diff --git a/arch/arm/include/asm/hardware/dec21285.h b/arch/arm/include/asm/hardware/dec21285.h
index cf2578f..0d75527 100644
--- a/arch/arm/include/asm/hardware/dec21285.h
+++ b/arch/arm/include/asm/hardware/dec21285.h
@@ -19,7 +19,7 @@
 #define DC21285_PCI_MEM			0x80000000
 
 #ifndef __ASSEMBLY__
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #define DC21285_IO(x)		((volatile unsigned long *)(ARMCSR_BASE+(x)))
 #else
 #define DC21285_IO(x)		(x)
diff --git a/arch/arm/include/asm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h
index df31b15..87bff09 100644
--- a/arch/arm/include/asm/hardware/iop3xx-adma.h
+++ b/arch/arm/include/asm/hardware/iop3xx-adma.h
@@ -19,7 +19,7 @@
 #define _ADMA_H
 #include <linux/types.h>
 #include <linux/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iop_adma.h>
 
 /* Memory copy units */
diff --git a/arch/arm/include/asm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h
index 0ebc91c..b69d972 100644
--- a/arch/arm/include/asm/hardware/iop3xx-gpio.h
+++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h
@@ -25,7 +25,7 @@
 #ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
 #define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm-generic/gpio.h>
 
 #define IOP3XX_N_GPIOS	8
diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h
index 6cf98d4..5da2595 100644
--- a/arch/arm/include/asm/hardware/sa1111.h
+++ b/arch/arm/include/asm/hardware/sa1111.h
@@ -12,7 +12,7 @@
 #ifndef _ASM_ARCH_SA1111
 #define _ASM_ARCH_SA1111
 
-#include <asm/arch/bitfield.h>
+#include <mach/bitfield.h>
 
 /*
  * The SA1111 is always located at virtual 0xf4000000, and is always
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index ffe07c0..94a95d7 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -82,7 +82,7 @@
 /*
  * Now, pick up the machine-defined IO definitions
  */
-#include <asm/arch/io.h>
+#include <mach/io.h>
 
 /*
  *  IO port access primitives
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index 9cb0190..d678609 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_ARM_IRQ_H
 #define __ASM_ARM_IRQ_H
 
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #ifndef irq_canonicalize
 #define irq_canonicalize(i)	(i)
diff --git a/arch/arm/include/asm/mc146818rtc.h b/arch/arm/include/asm/mc146818rtc.h
index 7b81e0c4..e1ca48a 100644
--- a/arch/arm/include/asm/mc146818rtc.h
+++ b/arch/arm/include/asm/mc146818rtc.h
@@ -4,7 +4,7 @@
 #ifndef _ASM_MC146818RTC_H
 #define _ASM_MC146818RTC_H
 
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 #include <asm/io.h>
 
 #ifndef RTC_PORT
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 9206922..1e070a2 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -24,7 +24,7 @@
 #endif
 
 #include <linux/compiler.h>
-#include <asm/arch/memory.h>
+#include <mach/memory.h>
 #include <asm/sizes.h>
 
 #ifdef CONFIG_MMU
diff --git a/arch/arm/include/asm/mmzone.h b/arch/arm/include/asm/mmzone.h
index f2fbb50..ae63a4f 100644
--- a/arch/arm/include/asm/mmzone.h
+++ b/arch/arm/include/asm/mmzone.h
@@ -25,6 +25,6 @@
  */
 #define NODE_MEM_MAP(nid)	(NODE_DATA(nid)->node_mem_map)
 
-#include <asm/arch/memory.h>
+#include <mach/memory.h>
 
 #endif
diff --git a/arch/arm/include/asm/mtd-xip.h b/arch/arm/include/asm/mtd-xip.h
index 4bc50f9..4225372a 100644
--- a/arch/arm/include/asm/mtd-xip.h
+++ b/arch/arm/include/asm/mtd-xip.h
@@ -17,8 +17,8 @@
 #ifndef __ARM_MTD_XIP_H__
 #define __ARM_MTD_XIP_H__
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/mtd-xip.h>
+#include <mach/hardware.h>
+#include <mach/mtd-xip.h>
 
 /* fill instruction prefetch */
 #define xip_iprefetch() 	do { asm volatile (".rep 8; nop; .endr"); } while (0)
diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h
index 968b833..721c03d 100644
--- a/arch/arm/include/asm/pci.h
+++ b/arch/arm/include/asm/pci.h
@@ -4,7 +4,7 @@
 #ifdef __KERNEL__
 #include <asm-generic/pci-dma-compat.h>
 
-#include <asm/arch/hardware.h> /* for PCIBIOS_MIN_* */
+#include <mach/hardware.h> /* for PCIBIOS_MIN_* */
 
 #define pcibios_scan_all_fns(a, b)	0
 
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 8ab060a..8e21ef1 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -20,7 +20,7 @@
 #else
 
 #include <asm/memory.h>
-#include <asm/arch/vmalloc.h>
+#include <mach/vmalloc.h>
 #include <asm/pgtable-hwdef.h>
 
 /*
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index cc12a52..727b5c0 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -14,7 +14,7 @@
 #include <linux/cpumask.h>
 #include <linux/thread_info.h>
 
-#include <asm/arch/smp.h>
+#include <mach/smp.h>
 
 #ifndef CONFIG_SMP
 # error "<asm/smp.h> included in non-SMP build"
diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h
index e50e292..3be8de3 100644
--- a/arch/arm/include/asm/timex.h
+++ b/arch/arm/include/asm/timex.h
@@ -12,7 +12,7 @@
 #ifndef _ASMARM_TIMEX_H
 #define _ASMARM_TIMEX_H
 
-#include <asm/arch/timex.h>
+#include <mach/timex.h>
 
 typedef unsigned long cycles_t;
 
diff --git a/arch/arm/include/asm/vga.h b/arch/arm/include/asm/vga.h
index 4f767ad..6a3cd2a2 100644
--- a/arch/arm/include/asm/vga.h
+++ b/arch/arm/include/asm/vga.h
@@ -1,7 +1,7 @@
 #ifndef ASMARM_VGA_H
 #define ASMARM_VGA_H
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #define VGA_MAP_MEM(x,s)	(PCIMEM_BASE + (x))
diff --git a/arch/arm/kernel/crunch-bits.S b/arch/arm/kernel/crunch-bits.S
index a268867..0ec9bb4 100644
--- a/arch/arm/kernel/crunch-bits.S
+++ b/arch/arm/kernel/crunch-bits.S
@@ -16,7 +16,7 @@
 #include <asm/ptrace.h>
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
 
 /*
  * We can't use hex constants here due to a bug in gas.
diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c
index 627d794..3b6a1c2 100644
--- a/arch/arm/kernel/crunch.c
+++ b/arch/arm/kernel/crunch.c
@@ -15,7 +15,7 @@
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/init.h>
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
 #include <asm/thread_notify.h>
 #include <asm/io.h>
 
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index 5617566..9550ff0 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -80,7 +80,7 @@
 #endif	/* CONFIG_CPU_V6 */
 
 #else
-#include <asm/arch/debug-macro.S>
+#include <mach/debug-macro.S>
 #endif	/* CONFIG_DEBUG_ICEDCC */
 
 /*
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index 8192fe8..7a50575 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -46,7 +46,7 @@
 
 #include <asm/dma.h>
 #include <asm/ecard.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/mach/irq.h>
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 7dca225..617e509 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -18,7 +18,7 @@
 #include <asm/memory.h>
 #include <asm/glue.h>
 #include <asm/vfpmacros.h>
-#include <asm/arch/entry-macro.S>
+#include <mach/entry-macro.S>
 #include <asm/thread_notify.h>
 
 #include "entry-header.S"
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 84694e8..060d7e2 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -10,7 +10,7 @@
 
 #include <asm/unistd.h>
 #include <asm/ftrace.h>
-#include <asm/arch/entry-macro.S>
+#include <mach/entry-macro.S>
 
 #include "entry-header.S"
 
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 89bfded..3fd8823 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -51,7 +51,7 @@
 
 static volatile int hlt_counter;
 
-#include <asm/arch/system.h>
+#include <mach/system.h>
 
 void disable_hlt(void)
 {
diff --git a/arch/arm/lib/ecard.S b/arch/arm/lib/ecard.S
index 79cf247..8678eb2 100644
--- a/arch/arm/lib/ecard.S
+++ b/arch/arm/lib/ecard.S
@@ -12,7 +12,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #define CPSR2SPSR(rt) \
 		mrs	rt, cpsr; \
diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S
index 4cc4411..9aaf7c7 100644
--- a/arch/arm/lib/io-readsw-armv3.S
+++ b/arch/arm/lib/io-readsw-armv3.S
@@ -9,7 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 .Linsw_bad_alignment:
 		adr	r0, .Linsw_bad_align_msg
diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S
index 0a34752..cd34503 100644
--- a/arch/arm/lib/io-writesw-armv3.S
+++ b/arch/arm/lib/io-writesw-armv3.S
@@ -9,7 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 .Loutsw_bad_alignment:
 		adr	r0, .Loutsw_bad_align_msg
diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c
index 08f030d..81a3ecc 100644
--- a/arch/arm/mach-aaec2000/aaed2000.c
+++ b/arch/arm/mach-aaec2000/aaed2000.c
@@ -20,14 +20,14 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/aaed2000.h>
+#include <mach/aaed2000.h>
 
 #include "core.h"
 
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
index 2e0cec2..dfb26bc 100644
--- a/arch/arm/mach-aaec2000/core.c
+++ b/arch/arm/mach-aaec2000/core.c
@@ -20,7 +20,7 @@
 #include <linux/timex.h>
 #include <linux/signal.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
diff --git a/arch/arm/mach-aaec2000/include/mach/aaec2000.h b/arch/arm/mach-aaec2000/include/mach/aaec2000.h
new file mode 100644
index 0000000..bc729c4
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/aaec2000.h
@@ -0,0 +1,207 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/aaec2000.h
+ *
+ *  AAEC-2000 registers definition
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_AAEC2000_H
+#define __ASM_ARCH_AAEC2000_H
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#error You must include hardware.h not this file
+#endif /* __ASM_ARCH_HARDWARE_H */
+
+/* Chip selects */
+#define AAEC_CS0	0x00000000
+#define AAEC_CS1	0x10000000
+#define AAEC_CS2	0x20000000
+#define AAEC_CS3	0x30000000
+
+/* Flash */
+#define AAEC_FLASH_BASE	AAEC_CS0
+#define AAEC_FLASH_SIZE	SZ_64M
+
+/* Interrupt controller */
+#define IRQ_BASE	__REG(0x80000500)
+#define IRQ_INTSR	__REG(0x80000500)	/* Int Status Register */
+#define IRQ_INTRSR	__REG(0x80000504)	/* Int Raw (unmasked) Status */
+#define IRQ_INTENS	__REG(0x80000508)	/* Int Enable Set */
+#define IRQ_INTENC	__REG(0x8000050c)	/* Int Enable Clear */
+
+/* UART 1 */
+#define UART1_BASE	__REG(0x80000600)
+#define UART1_DR	__REG(0x80000600) /* Data/FIFO Register */
+#define UART1_LCR	__REG(0x80000604) /* Link Control Register */
+#define UART1_BRCR	__REG(0x80000608) /* Baud Rate Control Register */
+#define UART1_CR	__REG(0x8000060c) /* Control Register */
+#define UART1_SR	__REG(0x80000610) /* Status Register */
+#define UART1_INT	__REG(0x80000614) /* Interrupt Status Register */
+#define UART1_INTM	__REG(0x80000618) /* Interrupt Mask Register */
+#define UART1_INTRES	__REG(0x8000061c) /* Int Result (masked status) Register */
+
+/* UART 2 */
+#define UART2_BASE	__REG(0x80000700)
+#define UART2_DR	__REG(0x80000700) /* Data/FIFO Register */
+#define UART2_LCR	__REG(0x80000704) /* Link Control Register */
+#define UART2_BRCR	__REG(0x80000708) /* Baud Rate Control Register */
+#define UART2_CR	__REG(0x8000070c) /* Control Register */
+#define UART2_SR	__REG(0x80000710) /* Status Register */
+#define UART2_INT	__REG(0x80000714) /* Interrupt Status Register */
+#define UART2_INTM	__REG(0x80000718) /* Interrupt Mask Register */
+#define UART2_INTRES	__REG(0x8000071c) /* Int Result (masked status) Register */
+
+/* UART 3 */
+#define UART3_BASE	__REG(0x80000800)
+#define UART3_DR	__REG(0x80000800) /* Data/FIFO Register */
+#define UART3_LCR	__REG(0x80000804) /* Link Control Register */
+#define UART3_BRCR	__REG(0x80000808) /* Baud Rate Control Register */
+#define UART3_CR	__REG(0x8000080c) /* Control Register */
+#define UART3_SR	__REG(0x80000810) /* Status Register */
+#define UART3_INT	__REG(0x80000814) /* Interrupt Status Register */
+#define UART3_INTM	__REG(0x80000818) /* Interrupt Mask Register */
+#define UART3_INTRES	__REG(0x8000081c) /* Int Result (masked status) Register */
+
+/* These are used in some places */
+#define _UART1_BASE __PREG(UART1_BASE)
+#define _UART2_BASE __PREG(UART2_BASE)
+#define _UART3_BASE __PREG(UART3_BASE)
+
+/* UART Registers Offsets */
+#define UART_DR		0x00
+#define UART_LCR	0x04
+#define UART_BRCR	0x08
+#define UART_CR		0x0c
+#define UART_SR		0x10
+#define UART_INT	0x14
+#define UART_INTM	0x18
+#define UART_INTRES	0x1c
+
+/* UART_LCR Bitmask */
+#define UART_LCR_BRK	(1 << 0) /* Send Break */
+#define UART_LCR_PEN	(1 << 1) /* Parity Enable */
+#define UART_LCR_EP	(1 << 2) /* Even/Odd Parity */
+#define UART_LCR_S2	(1 << 3) /* One/Two Stop bits */
+#define UART_LCR_FIFO	(1 << 4) /* FIFO Enable */
+#define UART_LCR_WL5	(0 << 5) /* Word Length - 5 bits */
+#define UART_LCR_WL6	(1 << 5) /* Word Length - 6 bits */
+#define UART_LCR_WL7	(1 << 6) /* Word Length - 7 bits */
+#define UART_LCR_WL8	(1 << 7) /* Word Length - 8 bits */
+
+/* UART_CR Bitmask */
+#define UART_CR_EN	(1 << 0) /* UART Enable */
+#define UART_CR_SIR	(1 << 1) /* IrDA SIR Enable */
+#define UART_CR_SIRLP	(1 << 2) /* Low Power IrDA Enable */
+#define UART_CR_RXP	(1 << 3) /* Receive Pin Polarity */
+#define UART_CR_TXP	(1 << 4) /* Transmit Pin Polarity */
+#define UART_CR_MXP	(1 << 5) /* Modem Pin Polarity */
+#define UART_CR_LOOP	(1 << 6) /* Loopback Mode */
+
+/* UART_SR Bitmask */
+#define UART_SR_CTS	(1 << 0) /* Clear To Send Status */
+#define UART_SR_DSR	(1 << 1) /* Data Set Ready Status */
+#define UART_SR_DCD	(1 << 2) /* Data Carrier Detect Status */
+#define UART_SR_TxBSY	(1 << 3) /* Transmitter Busy Status */
+#define UART_SR_RxFE	(1 << 4) /* Receive FIFO Empty Status */
+#define UART_SR_TxFF	(1 << 5) /* Transmit FIFO Full Status */
+#define UART_SR_RxFF	(1 << 6) /* Receive FIFO Full Status */
+#define UART_SR_TxFE	(1 << 7) /* Transmit FIFO Empty Status */
+
+/* UART_INT Bitmask */
+#define UART_INT_RIS	(1 << 0) /* Rx Interrupt */
+#define UART_INT_TIS	(1 << 1) /* Tx Interrupt */
+#define UART_INT_MIS	(1 << 2) /* Modem Interrupt */
+#define UART_INT_RTIS	(1 << 3) /* Receive Timeout Interrupt */
+
+/* Timer 1 */
+#define TIMER1_BASE	__REG(0x80000c00)
+#define TIMER1_LOAD	__REG(0x80000c00)	/* Timer 1 Load Register */
+#define TIMER1_VAL	__REG(0x80000c04)	/* Timer 1 Value Register */
+#define TIMER1_CTRL	__REG(0x80000c08)	/* Timer 1 Control Register */
+#define TIMER1_CLEAR	__REG(0x80000c0c)	/* Timer 1 Clear Register */
+
+/* Timer 2 */
+#define TIMER2_BASE	__REG(0x80000d00)
+#define TIMER2_LOAD	__REG(0x80000d00)	/* Timer 2 Load Register */
+#define TIMER2_VAL	__REG(0x80000d04)	/* Timer 2 Value Register */
+#define TIMER2_CTRL	__REG(0x80000d08)	/* Timer 2 Control Register */
+#define TIMER2_CLEAR	__REG(0x80000d0c)	/* Timer 2 Clear Register */
+
+/* Timer 3 */
+#define TIMER3_BASE	__REG(0x80000e00)
+#define TIMER3_LOAD	__REG(0x80000e00)	/* Timer 3 Load Register */
+#define TIMER3_VAL	__REG(0x80000e04)	/* Timer 3 Value Register */
+#define TIMER3_CTRL	__REG(0x80000e08)	/* Timer 3 Control Register */
+#define TIMER3_CLEAR	__REG(0x80000e0c)	/* Timer 3 Clear Register */
+
+/* Timer Control register bits */
+#define TIMER_CTRL_ENABLE	(1 << 7) /* Enable (Start Timer) */
+#define TIMER_CTRL_PERIODIC	(1 << 6) /* Periodic Running Mode */
+#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */
+#define TIMER_CTRL_CLKSEL_508K	(1 << 3) /* 508KHz Clock select (Timer 1, 2) */
+#define TIMER_CTRL_CLKSEL_2K	(0 << 3) /* 2KHz Clock Select (Timer 1, 2) */
+
+/* Power and State Control */
+#define POWER_BASE	__REG(0x80000400)
+#define POWER_PWRSR	__REG(0x80000400) /* Power Status Register */
+#define POWER_PWRCNT	__REG(0x80000404) /* Power/Clock control */
+#define POWER_HALT	__REG(0x80000408) /* Power Idle Mode */
+#define POWER_STDBY	__REG(0x8000040c) /* Power Standby Mode */
+#define POWER_BLEOI	__REG(0x80000410) /* Battery Low End of Interrupt */
+#define POWER_MCEOI	__REG(0x80000414) /* Media Changed EoI */
+#define POWER_TEOI	__REG(0x80000418) /* Tick EoI */
+#define POWER_STFCLR	__REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */
+#define POWER_CLKSET	__REG(0x80000420) /* Clock Speed Control */
+
+/* GPIO Registers */
+#define AAEC_GPIO_PHYS	0x80000e00
+
+#define AAEC_GPIO_PADR		__REG(AAEC_GPIO_PHYS + 0x00)
+#define AAEC_GPIO_PBDR		__REG(AAEC_GPIO_PHYS + 0x04)
+#define AAEC_GPIO_PCDR		__REG(AAEC_GPIO_PHYS + 0x08)
+#define AAEC_GPIO_PDDR		__REG(AAEC_GPIO_PHYS + 0x0c)
+#define AAEC_GPIO_PADDR		__REG(AAEC_GPIO_PHYS + 0x10)
+#define AAEC_GPIO_PBDDR		__REG(AAEC_GPIO_PHYS + 0x14)
+#define AAEC_GPIO_PCDDR		__REG(AAEC_GPIO_PHYS + 0x18)
+#define AAEC_GPIO_PDDDR		__REG(AAEC_GPIO_PHYS + 0x1c)
+#define AAEC_GPIO_PEDR		__REG(AAEC_GPIO_PHYS + 0x20)
+#define AAEC_GPIO_PEDDR		__REG(AAEC_GPIO_PHYS + 0x24)
+#define AAEC_GPIO_KSCAN		__REG(AAEC_GPIO_PHYS + 0x28)
+#define AAEC_GPIO_PINMUX	__REG(AAEC_GPIO_PHYS + 0x2c)
+#define AAEC_GPIO_PFDR		__REG(AAEC_GPIO_PHYS + 0x30)
+#define AAEC_GPIO_PFDDR		__REG(AAEC_GPIO_PHYS + 0x34)
+#define AAEC_GPIO_PGDR		__REG(AAEC_GPIO_PHYS + 0x38)
+#define AAEC_GPIO_PGDDR		__REG(AAEC_GPIO_PHYS + 0x3c)
+#define AAEC_GPIO_PHDR		__REG(AAEC_GPIO_PHYS + 0x40)
+#define AAEC_GPIO_PHDDR		__REG(AAEC_GPIO_PHYS + 0x44)
+#define AAEC_GPIO_RAZ		__REG(AAEC_GPIO_PHYS + 0x48)
+#define AAEC_GPIO_INTTYPE1	__REG(AAEC_GPIO_PHYS + 0x4c)
+#define AAEC_GPIO_INTTYPE2	__REG(AAEC_GPIO_PHYS + 0x50)
+#define AAEC_GPIO_FEOI		__REG(AAEC_GPIO_PHYS + 0x54)
+#define AAEC_GPIO_INTEN		__REG(AAEC_GPIO_PHYS + 0x58)
+#define AAEC_GPIO_INTSTATUS	__REG(AAEC_GPIO_PHYS + 0x5c)
+#define AAEC_GPIO_RAWINTSTATUS	__REG(AAEC_GPIO_PHYS + 0x60)
+#define AAEC_GPIO_DB		__REG(AAEC_GPIO_PHYS + 0x64)
+#define AAEC_GPIO_PAPINDR	__REG(AAEC_GPIO_PHYS + 0x68)
+#define AAEC_GPIO_PBPINDR	__REG(AAEC_GPIO_PHYS + 0x6c)
+#define AAEC_GPIO_PCPINDR	__REG(AAEC_GPIO_PHYS + 0x70)
+#define AAEC_GPIO_PDPINDR	__REG(AAEC_GPIO_PHYS + 0x74)
+#define AAEC_GPIO_PEPINDR	__REG(AAEC_GPIO_PHYS + 0x78)
+#define AAEC_GPIO_PFPINDR	__REG(AAEC_GPIO_PHYS + 0x7c)
+#define AAEC_GPIO_PGPINDR	__REG(AAEC_GPIO_PHYS + 0x80)
+#define AAEC_GPIO_PHPINDR	__REG(AAEC_GPIO_PHYS + 0x84)
+
+#define AAEC_GPIO_PINMUX_PE0CON		(1 << 0)
+#define AAEC_GPIO_PINMUX_PD0CON		(1 << 1)
+#define AAEC_GPIO_PINMUX_CODECON	(1 << 2)
+#define AAEC_GPIO_PINMUX_UART3CON	(1 << 3)
+
+/* LCD Controller */
+#define AAEC_CLCD_PHYS	0x80003000
+
+#endif /* __ARM_ARCH_AAEC2000_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/aaed2000.h b/arch/arm/mach-aaec2000/include/mach/aaed2000.h
new file mode 100644
index 0000000..f821295
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/aaed2000.h
@@ -0,0 +1,40 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/aaed2000.h
+ *
+ *  AAED-2000 specific bits definition
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_AAED2000_H
+#define __ASM_ARCH_AAED2000_H
+
+/* External GPIOs. */
+
+#define EXT_GPIO_PBASE	AAEC_CS3
+#define EXT_GPIO_VBASE	0xf8100000
+#define EXT_GPIO_LENGTH	0x00001000
+
+#define __ext_gpio_p2v(x)	((x) - EXT_GPIO_PBASE + EXT_GPIO_VBASE)
+#define __ext_gpio_v2p(x)	((x) + EXT_GPIO_PBASE - EXT_GPIO_VBASE)
+
+#define __EXT_GPIO_REG(x)	(*((volatile u32 *)__ext_gpio_p2v(x)))
+#define __EXT_GPIO_PREG(x)	(__ext_gpio_v2p((u32)&(x)))
+
+#define AAED_EXT_GPIO	__EXT_GPIO_REG(EXT_GPIO_PBASE)
+
+#define AAED_EGPIO_KBD_SCAN	0x00003fff /* Keyboard scan data */
+#define AAED_EGPIO_PWR_INT	0x00008fff /* Smart battery charger interrupt */
+#define AAED_EGPIO_SWITCHED	0x000f0000 /* DIP Switches */
+#define AAED_EGPIO_USB_VBUS	0x00400000 /* USB Vbus sense */
+#define AAED_EGPIO_LCD_PWR_EN	0x02000000 /* LCD and backlight PWR enable */
+#define AAED_EGPIO_nLED0	0x20000000 /* LED 0 */
+#define AAED_EGPIO_nLED1	0x20000000 /* LED 1 */
+#define AAED_EGPIO_nLED2	0x20000000 /* LED 2 */
+
+
+#endif /* __ARM_ARCH_AAED2000_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
new file mode 100644
index 0000000..0b6351d
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
@@ -0,0 +1,37 @@
+/*  arch/arm/mach-aaec2000/include/mach/debug-macro.S
+ *
+ *  Debugging macro include header
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include "hardware.h"
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x80000000		@ physical
+		movne	\rx, #io_p2v(0x80000000)	@ virtual
+		orr	\rx, \rx, #0x00000800
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x10]
+		tst	\rd, #(1 << 7)
+		beq	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+#if 0
+1001:		ldr	\rd, [\rx, #0x10]
+		tst	\rd, #(1 << 5)
+		beq	1001b
+#endif
+		.endm
diff --git a/arch/arm/mach-aaec2000/include/mach/dma.h b/arch/arm/mach-aaec2000/include/mach/dma.h
new file mode 100644
index 0000000..2da846c
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/dma.h
@@ -0,0 +1,9 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/dma.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
diff --git a/arch/arm/mach-aaec2000/include/mach/entry-macro.S b/arch/arm/mach-aaec2000/include/mach/entry-macro.S
new file mode 100644
index 0000000..c8fb344
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/entry-macro.S
@@ -0,0 +1,40 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/entry-macro.S
+ *
+ *  Low-level IRQ helper for aaec-2000 based platforms
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+#include <mach/irqs.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	r4, #0xf8000000
+		add	r4, r4, #0x00000500
+		mov	\base, r4
+		ldr	\irqstat, [\base, #0]
+		cmp	\irqstat, #0
+		bne	1001f
+		ldr	\irqnr, =NR_IRQS+1
+		b       1003f
+1001:		mov	\irqnr, #0
+1002:		ands	\tmp, \irqstat, #1
+		mov	\irqstat, \irqstat, LSR #1
+		add	\irqnr, \irqnr, #1
+		beq	1002b
+		sub	\irqnr, \irqnr, #1
+1003:
+		.endm
diff --git a/arch/arm/mach-aaec2000/include/mach/hardware.h b/arch/arm/mach-aaec2000/include/mach/hardware.h
new file mode 100644
index 0000000..965a6f6
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/hardware.h
@@ -0,0 +1,50 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/hardware.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/aaec2000.h>
+
+/* The kernel is loaded at physical address 0xf8000000.
+ * We map the IO space a bit after
+ */
+#define PIO_APB_BASE	0x80000000
+#define VIO_APB_BASE	0xf8000000
+#define IO_APB_LENGTH	0x2000
+#define PIO_AHB_BASE	0x80002000
+#define VIO_AHB_BASE	0xf8002000
+#define IO_AHB_LENGTH	0x2000
+
+#define VIO_BASE    VIO_APB_BASE
+#define PIO_BASE    PIO_APB_BASE
+
+#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE )
+#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE )
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+/* FIXME: Is it needed to optimize this a la pxa ?? */
+#define __REG(x)    (*((volatile u32 *)io_p2v(x)))
+#define __PREG(x)   (io_v2p((u32)&(x)))
+
+#else /* __ASSEMBLY__ */
+
+#define __REG(x)    io_p2v(x)
+#define __PREG(x)   io_v2p(x)
+
+#endif
+
+#include "aaec2000.h"
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/io.h b/arch/arm/mach-aaec2000/include/mach/io.h
new file mode 100644
index 0000000..c87c24de
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/io.h
+ *
+ *  Copied from asm/arch/sa1100/io.h
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-aaec2000/include/mach/irqs.h b/arch/arm/mach-aaec2000/include/mach/irqs.h
new file mode 100644
index 0000000..bf45c6d2
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/irqs.h
@@ -0,0 +1,46 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/irqs.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+
+#define INT_GPIOF0_FIQ	0  /* External GPIO Port F O Fast Interrupt Input */
+#define INT_BL_FIQ	1  /* Battery Low Fast Interrupt */
+#define INT_WE_FIQ	2  /* Watchdog Expired Fast Interrupt */
+#define INT_MV_FIQ	3  /* Media Changed Interrupt */
+#define INT_SC		4  /* Sound Codec Interrupt */
+#define INT_GPIO1	5  /* GPIO Port F Configurable Int 1 */
+#define INT_GPIO2	6  /* GPIO Port F Configurable Int 2 */
+#define INT_GPIO3	7  /* GPIO Port F Configurable Int 3 */
+#define INT_TMR1_OFL	8  /* Timer 1 Overflow Interrupt */
+#define INT_TMR2_OFL	9  /* Timer 2 Overflow Interrupt */
+#define INT_RTC_CM	10 /* RTC Compare Match Interrupt */
+#define INT_TICK	11 /* 64Hz Tick Interrupt */
+#define INT_UART1	12 /* UART1 Interrupt */
+#define INT_UART2	13 /* UART2 & Modem State Changed Interrupt */
+#define INT_LCD		14 /* LCD Interrupt */
+#define INT_SSI		15 /* SSI End of Transfer Interrupt */
+#define INT_UART3	16 /* UART3 Interrupt */
+#define INT_SCI		17 /* SCI Interrupt */
+#define INT_AAC		18 /* Advanced Audio Codec Interrupt */
+#define INT_MMC		19 /* MMC Interrupt */
+#define INT_USB		20 /* USB Interrupt */
+#define INT_DMA		21 /* DMA Interrupt */
+#define INT_TMR3_UOFL	22 /* Timer 3 Underflow Interrupt */
+#define INT_GPIO4	23 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO5	24 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO6	25 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO7	26 /* GPIO Port F Configurable Int 4 */
+#define INT_BMI		27 /* BMI Interrupt */
+
+#define NR_IRQS		(INT_BMI + 1)
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/memory.h b/arch/arm/mach-aaec2000/include/mach/memory.h
new file mode 100644
index 0000000..56ae900
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/memory.h
@@ -0,0 +1,30 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/memory.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+
+#define PHYS_OFFSET	UL(0xf0000000)
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+/*
+ * The nodes are the followings:
+ *
+ *   node 0: 0xf000.0000 - 0xf3ff.ffff
+ *   node 1: 0xf400.0000 - 0xf7ff.ffff
+ *   node 2: 0xf800.0000 - 0xfbff.ffff
+ *   node 3: 0xfc00.0000 - 0xffff.ffff
+ */
+#define NODE_MEM_SIZE_BITS	26
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/system.h b/arch/arm/mach-aaec2000/include/mach/system.h
new file mode 100644
index 0000000..8f4115d
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/system.h
@@ -0,0 +1,24 @@
+/*
+ *  arch/arm/mach-aaed2000/include/mach/system.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/timex.h b/arch/arm/mach-aaec2000/include/mach/timex.h
new file mode 100644
index 0000000..6c8edf4
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/timex.h
@@ -0,0 +1,18 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/timex.h
+ *
+ *  AAEC-2000 Architecture timex specification
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE		508000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/uncompress.h b/arch/arm/mach-aaec2000/include/mach/uncompress.h
new file mode 100644
index 0000000..381ecad
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/uncompress.h
@@ -0,0 +1,46 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/uncompress.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include "hardware.h"
+
+#define UART(x)         (*(volatile unsigned long *)(serial_port + (x)))
+
+static void putc(int c)
+{
+	unsigned long serial_port;
+        do {
+		serial_port = _UART3_BASE;
+		if (UART(UART_CR) & UART_CR_EN) break;
+		serial_port = _UART1_BASE;
+		if (UART(UART_CR) & UART_CR_EN) break;
+		serial_port = _UART2_BASE;
+		if (UART(UART_CR) & UART_CR_EN) break;
+		return;
+	} while (0);
+
+	/* wait for space in the UART's transmitter */
+	while ((UART(UART_SR) & UART_SR_TxFF))
+		barrier();
+
+	/* send the character out. */
+	UART(UART_DR) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
new file mode 100644
index 0000000..551f68f
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
@@ -0,0 +1,16 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/vmalloc.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END		(PAGE_OFFSET + 0x10000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index 933fa8f..638948c 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -17,10 +17,10 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91cap9.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index 25765f1..abb4aac 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -20,11 +20,11 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91cap9_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91cap9.h>
+#include <mach/at91cap9_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index d688c1d..28594fc 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -14,9 +14,9 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91rm9200.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_st.h>
+#include <mach/at91rm9200.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_st.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index d2c5c84..9338825 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -17,10 +17,10 @@
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 50392ff..a72e798 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -26,7 +26,7 @@
 
 #include <asm/mach/time.h>
 
-#include <asm/arch/at91_st.h>
+#include <mach/at91_st.h>
 
 static unsigned long last_crtr;
 static u32 irqmask;
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 380f12a..accb69e 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -15,11 +15,11 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9260.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index f5fec0a..7774d17 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -16,12 +16,12 @@
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91sam9260_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9260.h>
+#include <mach/at91sam9260_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 35bf6fd..7b51a59 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -15,10 +15,10 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91sam9261.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index b80860e..6b89172 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -20,11 +20,11 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91sam9261_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9261.h>
+#include <mach/at91sam9261_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 052074a..80bfab5 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -15,10 +15,10 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91sam9263.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91sam9263.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 42108d0..c93992f 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -19,11 +19,11 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9263.h>
-#include <asm/arch/at91sam9263_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9263.h>
+#include <mach/at91sam9263_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 5cecbd7..122fd77 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -17,7 +17,7 @@
 
 #include <asm/mach/time.h>
 
-#include <asm/arch/at91_pit.h>
+#include <mach/at91_pit.h>
 
 
 #define PIT_CPIV(x)	((x) & AT91_PIT_CPIV)
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 902c798..556bddf 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -14,11 +14,11 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9rl.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9rl.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 9c61576..6208863 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -16,11 +16,11 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9rl.h>
-#include <asm/arch/at91sam9rl_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9rl.h>
+#include <mach/at91sam9rl_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index f446477..ad3ec85 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -14,9 +14,9 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/at91x40.h>
-#include <asm/arch/at91_st.h>
-#include <asm/arch/timex.h>
+#include <mach/at91x40.h>
+#include <mach/at91_st.h>
+#include <mach/timex.h>
 #include "generic.h"
 
 /*
diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
index 4469044..869b5e2 100644
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@@ -23,10 +23,10 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/time.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/time.h>
-#include <asm/arch/at91_tc.h>
+#include <mach/at91_tc.h>
 
 /*
  *	3 counter/timer units present.
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index fc0f293..9b27d16 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -24,7 +24,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -33,8 +33,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index 17faf3c..cdddca5 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -28,7 +28,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,8 +37,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index fd21d42..1961995 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -33,7 +33,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -42,10 +42,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91cap9_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91cap9_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 5156fd28..afa1ff0 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -25,7 +25,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index a55e9ca8..cb7c9a8 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -28,7 +28,7 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,8 +37,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index dfdd4dd..8db8bd8 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -25,7 +25,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index 78b5c8b..43e1aa7 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -29,7 +29,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c
index 631af08..1f9d3cb 100644
--- a/arch/arm/mach-at91/board-eb01.c
+++ b/arch/arm/mach-at91/board-eb01.c
@@ -24,10 +24,10 @@
 #include <linux/platform_device.h>
 #include <linux/irq.h>
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/board.h>
+#include <mach/board.h>
 #include "generic.h"
 
 static void __init at91eb01_map_io(void)
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 58ae7a6..52865676 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -25,7 +25,7 @@
 #include <linux/module.h>
 #include <linux/device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 665d309..bfeee8a2 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -27,7 +27,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -36,8 +36,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index dbe79df..60626e7 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -29,7 +29,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 16577a0..a87956c 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -24,7 +24,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -33,8 +33,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 6054e98..fe9b991 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -25,7 +25,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,10 +34,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index ea39c6c..dbc912d 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -27,7 +27,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -36,9 +36,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 5393b80..4c28413 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -30,7 +30,7 @@
 #include <linux/input.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -39,9 +39,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index fe8a8ac..e4910cb 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -27,7 +27,7 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -36,8 +36,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 6f3b377..cb20e70 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -28,7 +28,7 @@
 #include <linux/spi/at73c213.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,8 +37,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 9d3c65e..1a9963b8 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -35,7 +35,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -44,9 +44,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 334b1592..b1d1196 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -32,7 +32,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -41,9 +41,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index f0975bb..d4eba5c 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -26,7 +26,7 @@
 #include <linux/spi/at73c213.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -35,8 +35,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 5271200..c6dce49 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -18,7 +18,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -27,9 +27,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
index 4048e47..f9d0b65 100644
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -30,7 +30,7 @@
 #include <linux/input.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -39,9 +39,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
index a2b9494..673e5c2 100644
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -29,7 +29,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 0aa3dda..36b380a 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -33,7 +33,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -42,9 +42,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index daebd72..f5c2847 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -25,9 +25,9 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/cpu.h>
+#include <mach/hardware.h>
+#include <mach/at91_pmc.h>
+#include <mach/cpu.h>
 
 #include "clock.h"
 
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 4db221e..8392d5b 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -20,9 +20,9 @@
 #include <linux/module.h>
 
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/at91_pio.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h
new file mode 100644
index 0000000..8e7ed5c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_adc.h
@@ -0,0 +1,61 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_adc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Analog-to-Digital Converter (ADC) registers.
+ * Based on AT91SAM9260 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_ADC_H
+#define AT91_ADC_H
+
+#define AT91_ADC_CR		0x00		/* Control Register */
+#define		AT91_ADC_SWRST		(1 << 0)	/* Software Reset */
+#define		AT91_ADC_START		(1 << 1)	/* Start Conversion */
+
+#define AT91_ADC_MR		0x04		/* Mode Register */
+#define		AT91_ADC_TRGEN		(1 << 0)	/* Trigger Enable */
+#define		AT91_ADC_TRGSEL		(7 << 1)	/* Trigger Selection */
+#define			AT91_ADC_TRGSEL_TC0		(0 << 1)
+#define			AT91_ADC_TRGSEL_TC1		(1 << 1)
+#define			AT91_ADC_TRGSEL_TC2		(2 << 1)
+#define			AT91_ADC_TRGSEL_EXTERNAL	(6 << 1)
+#define		AT91_ADC_LOWRES		(1 << 4)	/* Low Resolution */
+#define		AT91_ADC_SLEEP		(1 << 5)	/* Sleep Mode */
+#define		AT91_ADC_PRESCAL	(0x3f << 8)	/* Prescalar Rate Selection */
+#define			AT91_ADC_PRESCAL_(x)	((x) << 8)
+#define		AT91_ADC_STARTUP	(0x1f << 16)	/* Startup Up Time */
+#define			AT91_ADC_STARTUP_(x)	((x) << 16)
+#define		AT91_ADC_SHTIM		(0xf  << 24)	/* Sample & Hold Time */
+#define			AT91_ADC_SHTIM_(x)	((x) << 24)
+
+#define AT91_ADC_CHER		0x10		/* Channel Enable Register */
+#define AT91_ADC_CHDR		0x14		/* Channel Disable Register */
+#define AT91_ADC_CHSR		0x18		/* Channel Status Register */
+#define		AT91_ADC_CH(n)		(1 << (n))	/* Channel Number */
+
+#define AT91_ADC_SR		0x1C		/* Status Register */
+#define		AT91_ADC_EOC(n)		(1 << (n))	/* End of Conversion on Channel N */
+#define		AT91_ADC_OVRE(n)	(1 << ((n) + 8))/* Overrun Error on Channel N */
+#define		AT91_ADC_DRDY		(1 << 16)	/* Data Ready */
+#define		AT91_ADC_GOVRE		(1 << 17)	/* General Overrun Error */
+#define		AT91_ADC_ENDRX		(1 << 18)	/* End of RX Buffer */
+#define		AT91_ADC_RXFUFF		(1 << 19)	/* RX Buffer Full */
+
+#define AT91_ADC_LCDR		0x20		/* Last Converted Data Register */
+#define		AT91_ADC_LDATA		(0x3ff)
+
+#define AT91_ADC_IER		0x24		/* Interrupt Enable Register */
+#define AT91_ADC_IDR		0x28		/* Interrupt Disable Register */
+#define AT91_ADC_IMR		0x2C		/* Interrupt Mask Register */
+
+#define AT91_ADC_CHR(n)		(0x30 + ((n) * 4))	/* Channel Data Register N */
+#define		AT91_ADC_DATA		(0x3ff)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_aic.h b/arch/arm/mach-at91/include/mach/at91_aic.h
new file mode 100644
index 0000000..0356679
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_aic.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_aic.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Advanced Interrupt Controller (AIC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_AIC_H
+#define AT91_AIC_H
+
+#define AT91_AIC_SMR(n)		(AT91_AIC + ((n) * 4))	/* Source Mode Registers 0-31 */
+#define		AT91_AIC_PRIOR		(7 << 0)		/* Priority Level */
+#define		AT91_AIC_SRCTYPE	(3 << 5)		/* Interrupt Source Type */
+#define			AT91_AIC_SRCTYPE_LOW		(0 << 5)
+#define			AT91_AIC_SRCTYPE_FALLING	(1 << 5)
+#define			AT91_AIC_SRCTYPE_HIGH		(2 << 5)
+#define			AT91_AIC_SRCTYPE_RISING		(3 << 5)
+
+#define AT91_AIC_SVR(n)		(AT91_AIC + 0x80 + ((n) * 4))	/* Source Vector Registers 0-31 */
+#define AT91_AIC_IVR		(AT91_AIC + 0x100)	/* Interrupt Vector Register */
+#define AT91_AIC_FVR		(AT91_AIC + 0x104)	/* Fast Interrupt Vector Register */
+#define AT91_AIC_ISR		(AT91_AIC + 0x108)	/* Interrupt Status Register */
+#define		AT91_AIC_IRQID		(0x1f << 0)		/* Current Interrupt Identifier */
+
+#define AT91_AIC_IPR		(AT91_AIC + 0x10c)	/* Interrupt Pending Register */
+#define AT91_AIC_IMR		(AT91_AIC + 0x110)	/* Interrupt Mask Register */
+#define AT91_AIC_CISR		(AT91_AIC + 0x114)	/* Core Interrupt Status Register */
+#define		AT91_AIC_NFIQ		(1 << 0)		/* nFIQ Status */
+#define		AT91_AIC_NIRQ		(1 << 1)		/* nIRQ Status */
+
+#define AT91_AIC_IECR		(AT91_AIC + 0x120)	/* Interrupt Enable Command Register */
+#define AT91_AIC_IDCR		(AT91_AIC + 0x124)	/* Interrupt Disable Command Register */
+#define AT91_AIC_ICCR		(AT91_AIC + 0x128)	/* Interrupt Clear Command Register */
+#define AT91_AIC_ISCR		(AT91_AIC + 0x12c)	/* Interrupt Set Command Register */
+#define AT91_AIC_EOICR		(AT91_AIC + 0x130)	/* End of Interrupt Command Register */
+#define AT91_AIC_SPU		(AT91_AIC + 0x134)	/* Spurious Interrupt Vector Register */
+#define AT91_AIC_DCR		(AT91_AIC + 0x138)	/* Debug Control Register */
+#define		AT91_AIC_DCR_PROT	(1 << 0)		/* Protection Mode */
+#define		AT91_AIC_DCR_GMSK	(1 << 1)		/* General Mask */
+
+#define AT91_AIC_FFER		(AT91_AIC + 0x140)	/* Fast Forcing Enable Register [SAM9 only] */
+#define AT91_AIC_FFDR		(AT91_AIC + 0x144)	/* Fast Forcing Disable Register [SAM9 only] */
+#define AT91_AIC_FFSR		(AT91_AIC + 0x148)	/* Fast Forcing Status Register [SAM9 only] */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h
new file mode 100644
index 0000000..6dcaa77
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_dbgu.h
@@ -0,0 +1,66 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_dbgu.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Debug Unit (DBGU) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_DBGU_H
+#define AT91_DBGU_H
+
+#ifdef AT91_DBGU
+#define AT91_DBGU_CR		(AT91_DBGU + 0x00)	/* Control Register */
+#define AT91_DBGU_MR		(AT91_DBGU + 0x04)	/* Mode Register */
+#define AT91_DBGU_IER		(AT91_DBGU + 0x08)	/* Interrupt Enable Register */
+#define		AT91_DBGU_TXRDY		(1 << 1)		/* Transmitter Ready */
+#define		AT91_DBGU_TXEMPTY	(1 << 9)		/* Transmitter Empty */
+#define AT91_DBGU_IDR		(AT91_DBGU + 0x0c)	/* Interrupt Disable Register */
+#define AT91_DBGU_IMR		(AT91_DBGU + 0x10)	/* Interrupt Mask Register */
+#define AT91_DBGU_SR		(AT91_DBGU + 0x14)	/* Status Register */
+#define AT91_DBGU_RHR		(AT91_DBGU + 0x18)	/* Receiver Holding Register */
+#define AT91_DBGU_THR		(AT91_DBGU + 0x1c)	/* Transmitter Holding Register */
+#define AT91_DBGU_BRGR		(AT91_DBGU + 0x20)	/* Baud Rate Generator Register */
+
+#define AT91_DBGU_CIDR		(AT91_DBGU + 0x40)	/* Chip ID Register */
+#define AT91_DBGU_EXID		(AT91_DBGU + 0x44)	/* Chip ID Extension Register */
+#define AT91_DBGU_FNR		(AT91_DBGU + 0x48)	/* Force NTRST Register [SAM9 only] */
+#define		AT91_DBGU_FNTRST	(1 << 0)		/* Force NTRST */
+
+#endif /* AT91_DBGU */
+
+/*
+ * Some AT91 parts that don't have full DEBUG units still support the ID
+ * and extensions register.
+ */
+#define		AT91_CIDR_VERSION	(0x1f << 0)		/* Version of the Device */
+#define		AT91_CIDR_EPROC		(7    << 5)		/* Embedded Processor */
+#define		AT91_CIDR_NVPSIZ	(0xf  << 8)		/* Nonvolatile Program Memory Size */
+#define		AT91_CIDR_NVPSIZ2	(0xf  << 12)		/* Second Nonvolatile Program Memory Size */
+#define		AT91_CIDR_SRAMSIZ	(0xf  << 16)		/* Internal SRAM Size */
+#define			AT91_CIDR_SRAMSIZ_1K	(1 << 16)
+#define			AT91_CIDR_SRAMSIZ_2K	(2 << 16)
+#define			AT91_CIDR_SRAMSIZ_112K	(4 << 16)
+#define			AT91_CIDR_SRAMSIZ_4K	(5 << 16)
+#define			AT91_CIDR_SRAMSIZ_80K	(6 << 16)
+#define			AT91_CIDR_SRAMSIZ_160K	(7 << 16)
+#define			AT91_CIDR_SRAMSIZ_8K	(8 << 16)
+#define			AT91_CIDR_SRAMSIZ_16K	(9 << 16)
+#define			AT91_CIDR_SRAMSIZ_32K	(10 << 16)
+#define			AT91_CIDR_SRAMSIZ_64K	(11 << 16)
+#define			AT91_CIDR_SRAMSIZ_128K	(12 << 16)
+#define			AT91_CIDR_SRAMSIZ_256K	(13 << 16)
+#define			AT91_CIDR_SRAMSIZ_96K	(14 << 16)
+#define			AT91_CIDR_SRAMSIZ_512K	(15 << 16)
+#define		AT91_CIDR_ARCH		(0xff << 20)		/* Architecture Identifier */
+#define		AT91_CIDR_NVPTYP	(7    << 28)		/* Nonvolatile Program Memory Type */
+#define		AT91_CIDR_EXT		(1    << 31)		/* Extension Flag */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h
new file mode 100644
index 0000000..550d503
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_mci.h
@@ -0,0 +1,113 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_mci.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * MultiMedia Card Interface (MCI) registers.
+ * Based on AT91RM9200 datasheet revision F.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_MCI_H
+#define AT91_MCI_H
+
+#define AT91_MCI_CR		0x00		/* Control Register */
+#define		AT91_MCI_MCIEN		(1 <<  0)	/* Multi-Media Interface Enable */
+#define		AT91_MCI_MCIDIS		(1 <<  1)	/* Multi-Media Interface Disable */
+#define		AT91_MCI_PWSEN		(1 <<  2)	/* Power Save Mode Enable */
+#define		AT91_MCI_PWSDIS		(1 <<  3)	/* Power Save Mode Disable */
+#define		AT91_MCI_SWRST		(1 <<  7)	/* Software Reset */
+
+#define AT91_MCI_MR		0x04		/* Mode Register */
+#define		AT91_MCI_CLKDIV		(0xff  <<  0)	/* Clock Divider */
+#define		AT91_MCI_PWSDIV		(7     <<  8)	/* Power Saving Divider */
+#define		AT91_MCI_RDPROOF	(1     << 11)	/* Read Proof Enable [SAM926[03] only] */
+#define		AT91_MCI_WRPROOF	(1     << 12)	/* Write Proof Enable [SAM926[03] only] */
+#define		AT91_MCI_PDCFBYTE	(1     << 13)	/* PDC Force Byte Transfer [SAM926[03] only] */
+#define		AT91_MCI_PDCPADV	(1     << 14)	/* PDC Padding Value */
+#define		AT91_MCI_PDCMODE	(1     << 15)	/* PDC-orientated Mode */
+#define		AT91_MCI_BLKLEN		(0xfff << 18)	/* Data Block Length */
+
+#define AT91_MCI_DTOR		0x08		/* Data Timeout Register */
+#define		AT91_MCI_DTOCYC		(0xf << 0)	/* Data Timeout Cycle Number */
+#define		AT91_MCI_DTOMUL		(7   << 4)	/* Data Timeout Multiplier */
+#define		AT91_MCI_DTOMUL_1		(0 <<  4)
+#define		AT91_MCI_DTOMUL_16		(1 <<  4)
+#define		AT91_MCI_DTOMUL_128		(2 <<  4)
+#define		AT91_MCI_DTOMUL_256		(3 <<  4)
+#define		AT91_MCI_DTOMUL_1K		(4 <<  4)
+#define		AT91_MCI_DTOMUL_4K		(5 <<  4)
+#define		AT91_MCI_DTOMUL_64K		(6 <<  4)
+#define		AT91_MCI_DTOMUL_1M		(7 <<  4)
+
+#define AT91_MCI_SDCR		0x0c		/* SD Card Register */
+#define		AT91_MCI_SDCSEL		(3 << 0)	/* SD Card Selector */
+#define		AT91_MCI_SDCBUS		(1 << 7)	/* 1-bit or 4-bit bus */
+
+#define AT91_MCI_ARGR		0x10		/* Argument Register */
+
+#define AT91_MCI_CMDR		0x14		/* Command Register */
+#define		AT91_MCI_CMDNB		(0x3f << 0)	/* Command Number */
+#define		AT91_MCI_RSPTYP		(3    << 6)	/* Response Type */
+#define			AT91_MCI_RSPTYP_NONE	(0 <<  6)
+#define			AT91_MCI_RSPTYP_48	(1 <<  6)
+#define			AT91_MCI_RSPTYP_136	(2 <<  6)
+#define		AT91_MCI_SPCMD		(7    << 8)	/* Special Command */
+#define			AT91_MCI_SPCMD_NONE	(0 <<  8)
+#define			AT91_MCI_SPCMD_INIT	(1 <<  8)
+#define			AT91_MCI_SPCMD_SYNC	(2 <<  8)
+#define			AT91_MCI_SPCMD_ICMD	(4 <<  8)
+#define			AT91_MCI_SPCMD_IRESP	(5 <<  8)
+#define		AT91_MCI_OPDCMD		(1 << 11)	/* Open Drain Command */
+#define		AT91_MCI_MAXLAT		(1 << 12)	/* Max Latency for Command to Response */
+#define		AT91_MCI_TRCMD		(3 << 16)	/* Transfer Command */
+#define			AT91_MCI_TRCMD_NONE	(0 << 16)
+#define			AT91_MCI_TRCMD_START	(1 << 16)
+#define			AT91_MCI_TRCMD_STOP	(2 << 16)
+#define		AT91_MCI_TRDIR		(1 << 18)	/* Transfer Direction */
+#define		AT91_MCI_TRTYP		(3 << 19)	/* Transfer Type */
+#define			AT91_MCI_TRTYP_BLOCK	(0 << 19)
+#define			AT91_MCI_TRTYP_MULTIPLE	(1 << 19)
+#define			AT91_MCI_TRTYP_STREAM	(2 << 19)
+
+#define AT91_MCI_BLKR		0x18		/* Block Register */
+#define		AT91_MCI_BLKR_BCNT(n)	((0xffff & (n)) << 0)	/* Block count */
+#define		AT91_MCI_BLKR_BLKLEN(n)	((0xffff & (n)) << 16)	/* Block lenght */
+
+#define AT91_MCI_RSPR(n)	(0x20 + ((n) * 4))	/* Response Registers 0-3 */
+#define AT91_MCR_RDR		0x30		/* Receive Data Register */
+#define AT91_MCR_TDR		0x34		/* Transmit Data Register */
+
+#define AT91_MCI_SR		0x40		/* Status Register */
+#define		AT91_MCI_CMDRDY		(1 <<  0)	/* Command Ready */
+#define		AT91_MCI_RXRDY		(1 <<  1)	/* Receiver Ready */
+#define		AT91_MCI_TXRDY		(1 <<  2)	/* Transmit Ready */
+#define		AT91_MCI_BLKE		(1 <<  3)	/* Data Block Ended */
+#define		AT91_MCI_DTIP		(1 <<  4)	/* Data Transfer in Progress */
+#define		AT91_MCI_NOTBUSY	(1 <<  5)	/* Data Not Busy */
+#define		AT91_MCI_ENDRX		(1 <<  6)	/* End of RX Buffer */
+#define		AT91_MCI_ENDTX		(1 <<  7)	/* End fo TX Buffer */
+#define		AT91_MCI_SDIOIRQA	(1 <<  8)	/* SDIO Interrupt for Slot A */
+#define		AT91_MCI_SDIOIRQB	(1 <<  9)	/* SDIO Interrupt for Slot B */
+#define		AT91_MCI_RXBUFF		(1 << 14)	/* RX Buffer Full */
+#define		AT91_MCI_TXBUFE		(1 << 15)	/* TX Buffer Empty */
+#define		AT91_MCI_RINDE		(1 << 16)	/* Response Index Error */
+#define		AT91_MCI_RDIRE		(1 << 17)	/* Response Direction Error */
+#define		AT91_MCI_RCRCE		(1 << 18)	/* Response CRC Error */
+#define		AT91_MCI_RENDE		(1 << 19)	/* Response End Bit Error */
+#define		AT91_MCI_RTOE		(1 << 20)	/* Reponse Time-out Error */
+#define		AT91_MCI_DCRCE		(1 << 21)	/* Data CRC Error */
+#define		AT91_MCI_DTOE		(1 << 22)	/* Data Time-out Error */
+#define		AT91_MCI_OVRE		(1 << 30)	/* Overrun */
+#define		AT91_MCI_UNRE		(1 << 31)	/* Underrun */
+
+#define AT91_MCI_IER		0x44		/* Interrupt Enable Register */
+#define AT91_MCI_IDR		0x48		/* Interrupt Disable Register */
+#define AT91_MCI_IMR		0x4c		/* Interrupt Mask Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_pio.h b/arch/arm/mach-at91/include/mach/at91_pio.h
new file mode 100644
index 0000000..c6a31bf
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_pio.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_pio.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Parallel I/O Controller (PIO) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PIO_H
+#define AT91_PIO_H
+
+#define PIO_PER		0x00	/* Enable Register */
+#define PIO_PDR		0x04	/* Disable Register */
+#define PIO_PSR		0x08	/* Status Register */
+#define PIO_OER		0x10	/* Output Enable Register */
+#define PIO_ODR		0x14	/* Output Disable Register */
+#define PIO_OSR		0x18	/* Output Status Register */
+#define PIO_IFER	0x20	/* Glitch Input Filter Enable */
+#define PIO_IFDR	0x24	/* Glitch Input Filter Disable */
+#define PIO_IFSR	0x28	/* Glitch Input Filter Status */
+#define PIO_SODR	0x30	/* Set Output Data Register */
+#define PIO_CODR	0x34	/* Clear Output Data Register */
+#define PIO_ODSR	0x38	/* Output Data Status Register */
+#define PIO_PDSR	0x3c	/* Pin Data Status Register */
+#define PIO_IER		0x40	/* Interrupt Enable Register */
+#define PIO_IDR		0x44	/* Interrupt Disable Register */
+#define PIO_IMR		0x48	/* Interrupt Mask Register */
+#define PIO_ISR		0x4c	/* Interrupt Status Register */
+#define PIO_MDER	0x50	/* Multi-driver Enable Register */
+#define PIO_MDDR	0x54	/* Multi-driver Disable Register */
+#define PIO_MDSR	0x58	/* Multi-driver Status Register */
+#define PIO_PUDR	0x60	/* Pull-up Disable Register */
+#define PIO_PUER	0x64	/* Pull-up Enable Register */
+#define PIO_PUSR	0x68	/* Pull-up Status Register */
+#define PIO_ASR		0x70	/* Peripheral A Select Register */
+#define PIO_BSR		0x74	/* Peripheral B Select Register */
+#define PIO_ABSR	0x78	/* AB Status Register */
+#define PIO_OWER	0xa0	/* Output Write Enable Register */
+#define PIO_OWDR	0xa4	/* Output Write Disable Register */
+#define PIO_OWSR	0xa8	/* Output Write Status Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_pit.h b/arch/arm/mach-at91/include/mach/at91_pit.h
new file mode 100644
index 0000000..0448ac3
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_pit.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_pit.h
+ *
+ * Periodic Interval Timer (PIT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PIT_H
+#define AT91_PIT_H
+
+#define AT91_PIT_MR		(AT91_PIT + 0x00)	/* Mode Register */
+#define		AT91_PIT_PITIEN		(1 << 25)		/* Timer Interrupt Enable */
+#define		AT91_PIT_PITEN		(1 << 24)		/* Timer Enabled */
+#define		AT91_PIT_PIV		(0xfffff)		/* Periodic Interval Value */
+
+#define AT91_PIT_SR		(AT91_PIT + 0x04)	/* Status Register */
+#define		AT91_PIT_PITS		(1 << 0)		/* Timer Status */
+
+#define AT91_PIT_PIVR		(AT91_PIT + 0x08)	/* Periodic Interval Value Register */
+#define AT91_PIT_PIIR		(AT91_PIT + 0x0c)	/* Periodic Interval Image Register */
+#define		AT91_PIT_PICNT		(0xfff << 20)		/* Interval Counter */
+#define		AT91_PIT_CPIV		(0xfffff)		/* Inverval Value */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
new file mode 100644
index 0000000..2e3f289
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -0,0 +1,111 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_pmc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Power Management Controller (PMC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PMC_H
+#define AT91_PMC_H
+
+#define	AT91_PMC_SCER		(AT91_PMC + 0x00)	/* System Clock Enable Register */
+#define	AT91_PMC_SCDR		(AT91_PMC + 0x04)	/* System Clock Disable Register */
+
+#define	AT91_PMC_SCSR		(AT91_PMC + 0x08)	/* System Clock Status Register */
+#define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
+#define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
+#define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
+#define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
+#define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
+#define		AT91CAP9_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91CAP9 only] */
+#define		AT91SAM926x_PMC_UDP	(1 <<  7)		/* USB Devcice Port Clock [AT91SAM926x only] */
+#define		AT91_PMC_PCK0		(1 <<  8)		/* Programmable Clock 0 */
+#define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
+#define		AT91_PMC_PCK2		(1 << 10)		/* Programmable Clock 2 */
+#define		AT91_PMC_PCK3		(1 << 11)		/* Programmable Clock 3 */
+#define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
+#define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
+
+#define	AT91_PMC_PCER		(AT91_PMC + 0x10)	/* Peripheral Clock Enable Register */
+#define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
+#define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
+
+#define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [SAM9RL, CAP9] */
+#define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
+#define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
+#define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
+#define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI PLL Start-up Time */
+
+#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
+#define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
+#define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [SAM9x, CAP9] */
+#define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
+
+#define	AT91_CKGR_MCFR		(AT91_PMC + 0x24)	/* Main Clock Frequency Register */
+#define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
+#define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
+
+#define	AT91_CKGR_PLLAR		(AT91_PMC + 0x28)	/* PLL A Register */
+#define	AT91_CKGR_PLLBR		(AT91_PMC + 0x2c)	/* PLL B Register */
+#define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
+#define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
+#define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
+#define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
+#define		AT91_PMC_USBDIV		(3     << 28)		/* USB Divisor (PLLB only) */
+#define			AT91_PMC_USBDIV_1		(0 << 28)
+#define			AT91_PMC_USBDIV_2		(1 << 28)
+#define			AT91_PMC_USBDIV_4		(2 << 28)
+#define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
+
+#define	AT91_PMC_MCKR		(AT91_PMC + 0x30)	/* Master Clock Register */
+#define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
+#define			AT91_PMC_CSS_SLOW		(0 << 0)
+#define			AT91_PMC_CSS_MAIN		(1 << 0)
+#define			AT91_PMC_CSS_PLLA		(2 << 0)
+#define			AT91_PMC_CSS_PLLB		(3 << 0)
+#define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
+#define			AT91_PMC_PRES_1			(0 << 2)
+#define			AT91_PMC_PRES_2			(1 << 2)
+#define			AT91_PMC_PRES_4			(2 << 2)
+#define			AT91_PMC_PRES_8			(3 << 2)
+#define			AT91_PMC_PRES_16		(4 << 2)
+#define			AT91_PMC_PRES_32		(5 << 2)
+#define			AT91_PMC_PRES_64		(6 << 2)
+#define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
+#define			AT91RM9200_PMC_MDIV_1		(0 << 8)	/* [AT91RM9200 only] */
+#define			AT91RM9200_PMC_MDIV_2		(1 << 8)
+#define			AT91RM9200_PMC_MDIV_3		(2 << 8)
+#define			AT91RM9200_PMC_MDIV_4		(3 << 8)
+#define			AT91SAM9_PMC_MDIV_1		(0 << 8)	/* [SAM9,CAP9 only] */
+#define			AT91SAM9_PMC_MDIV_2		(1 << 8)
+#define			AT91SAM9_PMC_MDIV_4		(2 << 8)
+#define			AT91SAM9_PMC_MDIV_6		(3 << 8)
+#define		AT91_PMC_PDIV		(1 << 12)		/* Processor Clock Division [some SAM9 only] */
+#define			AT91_PMC_PDIV_1			(0 << 12)
+#define			AT91_PMC_PDIV_2			(1 << 12)
+
+#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
+
+#define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
+#define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
+#define	AT91_PMC_SR		(AT91_PMC + 0x68)	/* Status Register */
+#define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
+#define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
+#define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
+#define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
+#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [AT91CAP9 only] */
+#define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
+#define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
+#define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
+#define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
+#define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_rstc.h b/arch/arm/mach-at91/include/mach/at91_rstc.h
new file mode 100644
index 0000000..7cd1b39
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_rstc.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_rstc.h
+ *
+ * Reset Controller (RSTC) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RSTC_H
+#define AT91_RSTC_H
+
+#define AT91_RSTC_CR		(AT91_RSTC + 0x00)	/* Reset Controller Control Register */
+#define		AT91_RSTC_PROCRST	(1 << 0)		/* Processor Reset */
+#define		AT91_RSTC_PERRST	(1 << 2)		/* Peripheral Reset */
+#define		AT91_RSTC_EXTRST	(1 << 3)		/* External Reset */
+#define		AT91_RSTC_KEY		(0xa5 << 24)		/* KEY Password */
+
+#define AT91_RSTC_SR		(AT91_RSTC + 0x04)	/* Reset Controller Status Register */
+#define		AT91_RSTC_URSTS		(1 << 0)		/* User Reset Status */
+#define		AT91_RSTC_RSTTYP	(7 << 8)		/* Reset Type */
+#define			AT91_RSTC_RSTTYP_GENERAL	(0 << 8)
+#define			AT91_RSTC_RSTTYP_WAKEUP		(1 << 8)
+#define			AT91_RSTC_RSTTYP_WATCHDOG	(2 << 8)
+#define			AT91_RSTC_RSTTYP_SOFTWARE	(3 << 8)
+#define			AT91_RSTC_RSTTYP_USER	(4 << 8)
+#define		AT91_RSTC_NRSTL		(1 << 16)		/* NRST Pin Level */
+#define		AT91_RSTC_SRCMP		(1 << 17)		/* Software Reset Command in Progress */
+
+#define AT91_RSTC_MR		(AT91_RSTC + 0x08)	/* Reset Controller Mode Register */
+#define		AT91_RSTC_URSTEN	(1 << 0)		/* User Reset Enable */
+#define		AT91_RSTC_URSTIEN	(1 << 4)		/* User Reset Interrupt Enable */
+#define		AT91_RSTC_ERSTL		(0xf << 8)		/* External Reset Length */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_rtc.h b/arch/arm/mach-at91/include/mach/at91_rtc.h
new file mode 100644
index 0000000..e56f470
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_rtc.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_rtc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Real Time Clock (RTC) - System peripheral registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RTC_H
+#define AT91_RTC_H
+
+#define	AT91_RTC_CR		(AT91_RTC + 0x00)	/* Control Register */
+#define		AT91_RTC_UPDTIM		(1 <<  0)		/* Update Request Time Register */
+#define		AT91_RTC_UPDCAL		(1 <<  1)		/* Update Request Calendar Register */
+#define		AT91_RTC_TIMEVSEL	(3 <<  8)		/* Time Event Selection */
+#define			AT91_RTC_TIMEVSEL_MINUTE	(0 << 8)
+#define			AT91_RTC_TIMEVSEL_HOUR		(1 << 8)
+#define			AT91_RTC_TIMEVSEL_DAY24		(2 << 8)
+#define			AT91_RTC_TIMEVSEL_DAY12		(3 << 8)
+#define		AT91_RTC_CALEVSEL	(3 << 16)		/* Calendar Event Selection */
+#define			AT91_RTC_CALEVSEL_WEEK		(0 << 16)
+#define			AT91_RTC_CALEVSEL_MONTH		(1 << 16)
+#define			AT91_RTC_CALEVSEL_YEAR		(2 << 16)
+
+#define	AT91_RTC_MR		(AT91_RTC + 0x04)	/* Mode Register */
+#define			AT91_RTC_HRMOD		(1 <<  0)		/* 12/24 Hour Mode */
+
+#define	AT91_RTC_TIMR		(AT91_RTC + 0x08)	/* Time Register */
+#define		AT91_RTC_SEC		(0x7f <<  0)		/* Current Second */
+#define		AT91_RTC_MIN		(0x7f <<  8)		/* Current Minute */
+#define		AT91_RTC_HOUR		(0x3f << 16)		/* Current Hour */
+#define		AT91_RTC_AMPM		(1    << 22)		/* Ante Meridiem Post Meridiem Indicator */
+
+#define	AT91_RTC_CALR		(AT91_RTC + 0x0c)	/* Calendar Register */
+#define		AT91_RTC_CENT		(0x7f <<  0)		/* Current Century */
+#define		AT91_RTC_YEAR		(0xff <<  8)		/* Current Year */
+#define		AT91_RTC_MONTH		(0x1f << 16)		/* Current Month */
+#define		AT91_RTC_DAY		(7    << 21)		/* Current Day */
+#define		AT91_RTC_DATE		(0x3f << 24)		/* Current Date */
+
+#define	AT91_RTC_TIMALR		(AT91_RTC + 0x10)	/* Time Alarm Register */
+#define		AT91_RTC_SECEN		(1 <<  7)		/* Second Alarm Enable */
+#define		AT91_RTC_MINEN		(1 << 15)		/* Minute Alarm Enable */
+#define		AT91_RTC_HOUREN		(1 << 23)		/* Hour Alarm Enable */
+
+#define	AT91_RTC_CALALR		(AT91_RTC + 0x14)	/* Calendar Alarm Register */
+#define		AT91_RTC_MTHEN		(1 << 23)		/* Month Alarm Enable */
+#define		AT91_RTC_DATEEN		(1 << 31)		/* Date Alarm Enable */
+
+#define	AT91_RTC_SR		(AT91_RTC + 0x18)	/* Status Register */
+#define		AT91_RTC_ACKUPD		(1 <<  0)		/* Acknowledge for Update */
+#define		AT91_RTC_ALARM		(1 <<  1)		/* Alarm Flag */
+#define		AT91_RTC_SECEV		(1 <<  2)		/* Second Event */
+#define		AT91_RTC_TIMEV		(1 <<  3)		/* Time Event */
+#define		AT91_RTC_CALEV		(1 <<  4)		/* Calendar Event */
+
+#define	AT91_RTC_SCCR		(AT91_RTC + 0x1c)	/* Status Clear Command Register */
+#define	AT91_RTC_IER		(AT91_RTC + 0x20)	/* Interrupt Enable Register */
+#define	AT91_RTC_IDR		(AT91_RTC + 0x24)	/* Interrupt Disable Register */
+#define	AT91_RTC_IMR		(AT91_RTC + 0x28)	/* Interrupt Mask Register */
+
+#define	AT91_RTC_VER		(AT91_RTC + 0x2c)	/* Valid Entry Register */
+#define		AT91_RTC_NVTIM		(1 <<  0)		/* Non valid Time */
+#define		AT91_RTC_NVCAL		(1 <<  1)		/* Non valid Calendar */
+#define		AT91_RTC_NVTIMALR	(1 <<  2)		/* Non valid Time Alarm */
+#define		AT91_RTC_NVCALALR	(1 <<  3)		/* Non valid Calendar Alarm */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_rtt.h b/arch/arm/mach-at91/include/mach/at91_rtt.h
new file mode 100644
index 0000000..71782e5
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_rtt.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_rtt.h
+ *
+ * Real-time Timer (RTT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RTT_H
+#define AT91_RTT_H
+
+#define AT91_RTT_MR		0x00			/* Real-time Mode Register */
+#define		AT91_RTT_RTPRES		(0xffff << 0)		/* Real-time Timer Prescaler Value */
+#define		AT91_RTT_ALMIEN		(1 << 16)		/* Alarm Interrupt Enable */
+#define		AT91_RTT_RTTINCIEN	(1 << 17)		/* Real Time Timer Increment Interrupt Enable */
+#define		AT91_RTT_RTTRST		(1 << 18)		/* Real Time Timer Restart */
+
+#define AT91_RTT_AR		0x04			/* Real-time Alarm Register */
+#define		AT91_RTT_ALMV		(0xffffffff)		/* Alarm Value */
+
+#define AT91_RTT_VR		0x08			/* Real-time Value Register */
+#define		AT91_RTT_CRTV		(0xffffffff)		/* Current Real-time Value */
+
+#define AT91_RTT_SR		0x0c			/* Real-time Status Register */
+#define		AT91_RTT_ALMS		(1 << 0)		/* Real-time Alarm Status */
+#define		AT91_RTT_RTTINC		(1 << 1)		/* Real-time Timer Increment */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_shdwc.h b/arch/arm/mach-at91/include/mach/at91_shdwc.h
new file mode 100644
index 0000000..60be5ae
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_shdwc.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_shdwc.h
+ *
+ * Shutdown Controller (SHDWC) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SHDWC_H
+#define AT91_SHDWC_H
+
+#define AT91_SHDW_CR		(AT91_SHDWC + 0x00)	/* Shut Down Control Register */
+#define		AT91_SHDW_SHDW		(1    << 0)		/* Shut Down command */
+#define		AT91_SHDW_KEY		(0xa5 << 24)		/* KEY Password */
+
+#define AT91_SHDW_MR		(AT91_SHDWC + 0x04)	/* Shut Down Mode Register */
+#define		AT91_SHDW_WKMODE0	(3 << 0)		/* Wake-up 0 Mode Selection */
+#define			AT91_SHDW_WKMODE0_NONE		0
+#define			AT91_SHDW_WKMODE0_HIGH		1
+#define			AT91_SHDW_WKMODE0_LOW		2
+#define			AT91_SHDW_WKMODE0_ANYLEVEL	3
+#define		AT91_SHDW_CPTWK0	(0xf << 4)		/* Counter On Wake Up 0 */
+#define			AT91_SHDW_CPTWK0_(x)	((x) << 4)
+#define		AT91_SHDW_RTTWKEN	(1   << 16)		/* Real Time Timer Wake-up Enable */
+
+#define AT91_SHDW_SR		(AT91_SHDWC + 0x08)	/* Shut Down Status Register */
+#define		AT91_SHDW_WAKEUP0	(1 <<  0)		/* Wake-up 0 Status */
+#define		AT91_SHDW_RTTWK		(1 << 16)		/* Real-time Timer Wake-up */
+#define		AT91_SHDW_RTCWK		(1 << 17)		/* Real-time Clock Wake-up [SAM9RL] */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_spi.h b/arch/arm/mach-at91/include/mach/at91_spi.h
new file mode 100644
index 0000000..2f6ba0c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_spi.h
@@ -0,0 +1,81 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_spi.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Serial Peripheral Interface (SPI) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SPI_H
+#define AT91_SPI_H
+
+#define AT91_SPI_CR			0x00		/* Control Register */
+#define		AT91_SPI_SPIEN		(1 <<  0)		/* SPI Enable */
+#define		AT91_SPI_SPIDIS		(1 <<  1)		/* SPI Disable */
+#define		AT91_SPI_SWRST		(1 <<  7)		/* SPI Software Reset */
+#define		AT91_SPI_LASTXFER	(1 << 24)		/* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_MR			0x04		/* Mode Register */
+#define		AT91_SPI_MSTR		(1    <<  0)		/* Master/Slave Mode */
+#define		AT91_SPI_PS		(1    <<  1)		/* Peripheral Select */
+#define			AT91_SPI_PS_FIXED	(0 << 1)
+#define			AT91_SPI_PS_VARIABLE	(1 << 1)
+#define		AT91_SPI_PCSDEC		(1    <<  2)		/* Chip Select Decode */
+#define		AT91_SPI_DIV32		(1    <<  3)		/* Clock Selection [AT91RM9200 only] */
+#define		AT91_SPI_MODFDIS	(1    <<  4)		/* Mode Fault Detection */
+#define		AT91_SPI_LLB		(1    <<  7)		/* Local Loopback Enable */
+#define		AT91_SPI_PCS		(0xf  << 16)		/* Peripheral Chip Select */
+#define		AT91_SPI_DLYBCS		(0xff << 24)		/* Delay Between Chip Selects */
+
+#define AT91_SPI_RDR		0x08			/* Receive Data Register */
+#define		AT91_SPI_RD		(0xffff <<  0)		/* Receive Data */
+#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
+
+#define AT91_SPI_TDR		0x0c			/* Transmit Data Register */
+#define		AT91_SPI_TD		(0xffff <<  0)		/* Transmit Data */
+#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
+#define		AT91_SPI_LASTXFER	(1	<< 24)		/* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_SR		0x10			/* Status Register */
+#define		AT91_SPI_RDRF		(1 <<  0)		/* Receive Data Register Full */
+#define		AT91_SPI_TDRE		(1 <<  1)		/* Transmit Data Register Full */
+#define		AT91_SPI_MODF		(1 <<  2)		/* Mode Fault Error */
+#define		AT91_SPI_OVRES		(1 <<  3)		/* Overrun Error Status */
+#define		AT91_SPI_ENDRX		(1 <<  4)		/* End of RX buffer */
+#define		AT91_SPI_ENDTX		(1 <<  5)		/* End of TX buffer */
+#define		AT91_SPI_RXBUFF		(1 <<  6)		/* RX Buffer Full */
+#define		AT91_SPI_TXBUFE		(1 <<  7)		/* TX Buffer Empty */
+#define		AT91_SPI_NSSR		(1 <<  8)		/* NSS Rising [SAM9261 only] */
+#define		AT91_SPI_TXEMPTY	(1 <<  9)		/* Transmission Register Empty [SAM9261 only] */
+#define		AT91_SPI_SPIENS		(1 << 16)		/* SPI Enable Status */
+
+#define AT91_SPI_IER		0x14			/* Interrupt Enable Register */
+#define AT91_SPI_IDR		0x18			/* Interrupt Disable Register */
+#define AT91_SPI_IMR		0x1c			/* Interrupt Mask Register */
+
+#define AT91_SPI_CSR(n)		(0x30 + ((n) * 4))	/* Chip Select Registers 0-3 */
+#define		AT91_SPI_CPOL		(1    <<  0)		/* Clock Polarity */
+#define		AT91_SPI_NCPHA		(1    <<  1)		/* Clock Phase */
+#define		AT91_SPI_CSAAT		(1    <<  3)		/* Chip Select Active After Transfer [SAM9261 only] */
+#define		AT91_SPI_BITS		(0xf  <<  4)		/* Bits Per Transfer */
+#define			AT91_SPI_BITS_8		(0 << 4)
+#define			AT91_SPI_BITS_9		(1 << 4)
+#define			AT91_SPI_BITS_10	(2 << 4)
+#define			AT91_SPI_BITS_11	(3 << 4)
+#define			AT91_SPI_BITS_12	(4 << 4)
+#define			AT91_SPI_BITS_13	(5 << 4)
+#define			AT91_SPI_BITS_14	(6 << 4)
+#define			AT91_SPI_BITS_15	(7 << 4)
+#define			AT91_SPI_BITS_16	(8 << 4)
+#define		AT91_SPI_SCBR		(0xff <<  8)		/* Serial Clock Baud Rate */
+#define		AT91_SPI_DLYBS		(0xff << 16)		/* Delay before SPCK */
+#define		AT91_SPI_DLYBCT		(0xff << 24)		/* Delay between Consecutive Transfers */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_ssc.h b/arch/arm/mach-at91/include/mach/at91_ssc.h
new file mode 100644
index 0000000..a81114c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_ssc.h
@@ -0,0 +1,106 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_ssc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Serial Synchronous Controller (SSC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SSC_H
+#define AT91_SSC_H
+
+#define AT91_SSC_CR		0x00	/* Control Register */
+#define		AT91_SSC_RXEN		(1 <<  0)	/* Receive Enable */
+#define		AT91_SSC_RXDIS		(1 <<  1)	/* Receive Disable */
+#define		AT91_SSC_TXEN		(1 <<  8)	/* Transmit Enable */
+#define		AT91_SSC_TXDIS		(1 <<  9)	/* Transmit Disable */
+#define		AT91_SSC_SWRST		(1 << 15)	/* Software Reset */
+
+#define AT91_SSC_CMR		0x04	/* Clock Mode Register */
+#define		AT91_SSC_CMR_DIV	(0xfff << 0)	/* Clock Divider */
+
+#define AT91_SSC_RCMR		0x10	/* Receive Clock Mode Register */
+#define		AT91_SSC_CKS		(3    <<  0)	/* Clock Selection */
+#define			AT91_SSC_CKS_DIV		(0 << 0)
+#define			AT91_SSC_CKS_CLOCK		(1 << 0)
+#define			AT91_SSC_CKS_PIN		(2 << 0)
+#define		AT91_SSC_CKO		(7    <<  2)	/* Clock Output Mode Selection */
+#define			AT91_SSC_CKO_NONE		(0 << 2)
+#define			AT91_SSC_CKO_CONTINUOUS		(1 << 2)
+#define		AT91_SSC_CKI		(1    <<  5)	/* Clock Inversion */
+#define			AT91_SSC_CKI_FALLING		(0 << 5)
+#define			AT91_SSC_CK_RISING		(1 << 5)
+#define		AT91_SSC_CKG		(1    <<  6)	/* Receive Clock Gating Selection [AT91SAM9261 only] */
+#define			AT91_SSC_CKG_NONE		(0 << 6)
+#define			AT91_SSC_CKG_RFLOW		(1 << 6)
+#define			AT91_SSC_CKG_RFHIGH		(2 << 6)
+#define		AT91_SSC_START		(0xf  <<  8)	/* Start Selection */
+#define			AT91_SSC_START_CONTINUOUS	(0 << 8)
+#define			AT91_SSC_START_TX_RX		(1 << 8)
+#define			AT91_SSC_START_LOW_RF		(2 << 8)
+#define			AT91_SSC_START_HIGH_RF		(3 << 8)
+#define			AT91_SSC_START_FALLING_RF	(4 << 8)
+#define			AT91_SSC_START_RISING_RF	(5 << 8)
+#define			AT91_SSC_START_LEVEL_RF		(6 << 8)
+#define			AT91_SSC_START_EDGE_RF		(7 << 8)
+#define		AT91_SSC_STOP		(1    << 12)	/* Receive Stop Selection [AT91SAM9261 only] */
+#define		AT91_SSC_STTDLY		(0xff << 16)	/* Start Delay */
+#define		AT91_SSC_PERIOD		(0xff << 24)	/* Period Divider Selection */
+
+#define AT91_SSC_RFMR		0x14	/* Receive Frame Mode Register */
+#define		AT91_SSC_DATALEN	(0x1f <<  0)	/* Data Length */
+#define		AT91_SSC_LOOP		(1    <<  5)	/* Loop Mode */
+#define		AT91_SSC_MSBF		(1    <<  7)	/* Most Significant Bit First */
+#define		AT91_SSC_DATNB		(0xf  <<  8)	/* Data Number per Frame */
+#define		AT91_SSC_FSLEN		(0xf  << 16)	/* Frame Sync Length */
+#define		AT91_SSC_FSOS		(7    << 20)	/* Frame Sync Output Selection */
+#define			AT91_SSC_FSOS_NONE		(0 << 20)
+#define			AT91_SSC_FSOS_NEGATIVE		(1 << 20)
+#define			AT91_SSC_FSOS_POSITIVE		(2 << 20)
+#define			AT91_SSC_FSOS_LOW		(3 << 20)
+#define			AT91_SSC_FSOS_HIGH		(4 << 20)
+#define			AT91_SSC_FSOS_TOGGLE		(5 << 20)
+#define		AT91_SSC_FSEDGE		(1    << 24)	/* Frame Sync Edge Detection */
+#define			AT91_SSC_FSEDGE_POSITIVE	(0 << 24)
+#define			AT91_SSC_FSEDGE_NEGATIVE	(1 << 24)
+
+#define AT91_SSC_TCMR		0x18	/* Transmit Clock Mode Register */
+#define AT91_SSC_TFMR		0x1c	/* Transmit Fram Mode Register */
+#define		AT91_SSC_DATDEF		(1 <<  5)	/* Data Default Value */
+#define		AT91_SSC_FSDEN		(1 << 23)	/* Frame Sync Data Enable */
+
+#define AT91_SSC_RHR		0x20	/* Receive Holding Register */
+#define AT91_SSC_THR		0x24	/* Transmit Holding Register */
+#define AT91_SSC_RSHR		0x30	/* Receive Sync Holding Register */
+#define AT91_SSC_TSHR		0x34	/* Transmit Sync Holding Register */
+
+#define AT91_SSC_RC0R		0x38	/* Receive Compare 0 Register [AT91SAM9261 only] */
+#define AT91_SSC_RC1R		0x3c	/* Receive Compare 1 Register [AT91SAM9261 only] */
+
+#define AT91_SSC_SR		0x40	/* Status Register */
+#define		AT91_SSC_TXRDY		(1 <<  0)	/* Transmit Ready */
+#define		AT91_SSC_TXEMPTY	(1 <<  1)	/* Transmit Empty */
+#define		AT91_SSC_ENDTX		(1 <<  2)	/* End of Transmission */
+#define		AT91_SSC_TXBUFE		(1 <<  3)	/* Transmit Buffer Empty */
+#define		AT91_SSC_RXRDY		(1 <<  4)	/* Receive Ready */
+#define		AT91_SSC_OVRUN		(1 <<  5)	/* Receive Overrun */
+#define		AT91_SSC_ENDRX		(1 <<  6)	/* End of Reception */
+#define		AT91_SSC_RXBUFF		(1 <<  7)	/* Receive Buffer Full */
+#define		AT91_SSC_CP0		(1 <<  8)	/* Compare 0 [AT91SAM9261 only] */
+#define		AT91_SSC_CP1		(1 <<  9)	/* Compare 1 [AT91SAM9261 only] */
+#define		AT91_SSC_TXSYN		(1 << 10)	/* Transmit Sync */
+#define		AT91_SSC_RXSYN		(1 << 11)	/* Receive Sync */
+#define		AT91_SSC_TXENA		(1 << 16)	/* Transmit Enable */
+#define		AT91_SSC_RXENA		(1 << 17)	/* Receive Enable */
+
+#define AT91_SSC_IER		0x44	/* Interrupt Enable Register */
+#define AT91_SSC_IDR		0x48	/* Interrupt Disable Register */
+#define AT91_SSC_IMR		0x4c	/* Interrupt Mask Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_st.h b/arch/arm/mach-at91/include/mach/at91_st.h
new file mode 100644
index 0000000..8847173
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_st.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_st.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * System Timer (ST) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_ST_H
+#define AT91_ST_H
+
+#define	AT91_ST_CR		(AT91_ST + 0x00)	/* Control Register */
+#define 	AT91_ST_WDRST		(1 << 0)		/* Watchdog Timer Restart */
+
+#define	AT91_ST_PIMR		(AT91_ST + 0x04)	/* Period Interval Mode Register */
+#define		AT91_ST_PIV		(0xffff <<  0)		/* Period Interval Value */
+
+#define	AT91_ST_WDMR		(AT91_ST + 0x08)	/* Watchdog Mode Register */
+#define		AT91_ST_WDV		(0xffff <<  0)		/* Watchdog Counter Value */
+#define		AT91_ST_RSTEN		(1	<< 16)		/* Reset Enable */
+#define		AT91_ST_EXTEN		(1	<< 17)		/* External Signal Assertion Enable */
+
+#define	AT91_ST_RTMR		(AT91_ST + 0x0c)	/* Real-time Mode Register */
+#define		AT91_ST_RTPRES		(0xffff <<  0)		/* Real-time Prescalar Value */
+
+#define	AT91_ST_SR		(AT91_ST + 0x10)	/* Status Register */
+#define		AT91_ST_PITS		(1 << 0)		/* Period Interval Timer Status */
+#define		AT91_ST_WDOVF		(1 << 1) 		/* Watchdog Overflow */
+#define		AT91_ST_RTTINC		(1 << 2) 		/* Real-time Timer Increment */
+#define		AT91_ST_ALMS		(1 << 3) 		/* Alarm Status */
+
+#define	AT91_ST_IER		(AT91_ST + 0x14)	/* Interrupt Enable Register */
+#define	AT91_ST_IDR		(AT91_ST + 0x18)	/* Interrupt Disable Register */
+#define	AT91_ST_IMR		(AT91_ST + 0x1c)	/* Interrupt Mask Register */
+
+#define	AT91_ST_RTAR		(AT91_ST + 0x20)	/* Real-time Alarm Register */
+#define		AT91_ST_ALMV		(0xfffff << 0)		/* Alarm Value */
+
+#define	AT91_ST_CRTR		(AT91_ST + 0x24)	/* Current Real-time Register */
+#define		AT91_ST_CRTV		(0xfffff << 0)		/* Current Real-Time Value */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_tc.h b/arch/arm/mach-at91/include/mach/at91_tc.h
new file mode 100644
index 0000000..46a317f
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_tc.h
@@ -0,0 +1,146 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_tc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Timer/Counter Unit (TC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_TC_H
+#define AT91_TC_H
+
+#define AT91_TC_BCR		0xc0		/* TC Block Control Register */
+#define		AT91_TC_SYNC		(1 << 0)	/* Synchro Command */
+
+#define AT91_TC_BMR		0xc4		/* TC Block Mode Register */
+#define		AT91_TC_TC0XC0S		(3 << 0)	/* External Clock Signal 0 Selection */
+#define			AT91_TC_TC0XC0S_TCLK0		(0 << 0)
+#define			AT91_TC_TC0XC0S_NONE		(1 << 0)
+#define			AT91_TC_TC0XC0S_TIOA1		(2 << 0)
+#define			AT91_TC_TC0XC0S_TIOA2		(3 << 0)
+#define		AT91_TC_TC1XC1S		(3 << 2)	/* External Clock Signal 1 Selection */
+#define			AT91_TC_TC1XC1S_TCLK1		(0 << 2)
+#define			AT91_TC_TC1XC1S_NONE		(1 << 2)
+#define			AT91_TC_TC1XC1S_TIOA0		(2 << 2)
+#define			AT91_TC_TC1XC1S_TIOA2		(3 << 2)
+#define		AT91_TC_TC2XC2S		(3 << 4)	/* External Clock Signal 2 Selection */
+#define			AT91_TC_TC2XC2S_TCLK2		(0 << 4)
+#define			AT91_TC_TC2XC2S_NONE		(1 << 4)
+#define			AT91_TC_TC2XC2S_TIOA0		(2 << 4)
+#define			AT91_TC_TC2XC2S_TIOA1		(3 << 4)
+
+
+#define AT91_TC_CCR		0x00		/* Channel Control Register */
+#define		AT91_TC_CLKEN		(1 << 0)	/* Counter Clock Enable Command */
+#define		AT91_TC_CLKDIS		(1 << 1)	/* Counter CLock Disable Command */
+#define		AT91_TC_SWTRG		(1 << 2)	/* Software Trigger Command */
+
+#define AT91_TC_CMR		0x04		/* Channel Mode Register */
+#define		AT91_TC_TCCLKS		(7 << 0)	/* Capture/Waveform Mode: Clock Selection */
+#define			AT91_TC_TIMER_CLOCK1		(0 << 0)
+#define			AT91_TC_TIMER_CLOCK2		(1 << 0)
+#define			AT91_TC_TIMER_CLOCK3		(2 << 0)
+#define			AT91_TC_TIMER_CLOCK4		(3 << 0)
+#define			AT91_TC_TIMER_CLOCK5		(4 << 0)
+#define			AT91_TC_XC0			(5 << 0)
+#define			AT91_TC_XC1			(6 << 0)
+#define			AT91_TC_XC2			(7 << 0)
+#define		AT91_TC_CLKI		(1 << 3)	/* Capture/Waveform Mode: Clock Invert */
+#define		AT91_TC_BURST		(3 << 4)	/* Capture/Waveform Mode: Burst Signal Selection */
+#define		AT91_TC_LDBSTOP		(1 << 6)	/* Capture Mode: Counter Clock Stopped with TB Loading */
+#define		AT91_TC_LDBDIS		(1 << 7)	/* Capture Mode: Counter Clock Disable with RB Loading */
+#define		AT91_TC_ETRGEDG		(3 << 8)	/* Capture Mode: External Trigger Edge Selection */
+#define		AT91_TC_ABETRG		(1 << 10)	/* Capture Mode: TIOA or TIOB External Trigger Selection */
+#define		AT91_TC_CPCTRG		(1 << 14)	/* Capture Mode: RC Compare Trigger Enable */
+#define		AT91_TC_WAVE		(1 << 15)	/* Capture/Waveform mode */
+#define		AT91_TC_LDRA		(3 << 16)	/* Capture Mode: RA Loading Selection */
+#define		AT91_TC_LDRB		(3 << 18)	/* Capture Mode: RB Loading Selection */
+
+#define		AT91_TC_CPCSTOP		(1 <<  6)	/* Waveform Mode: Counter Clock Stopped with RC Compare */
+#define		AT91_TC_CPCDIS		(1 <<  7)	/* Waveform Mode: Counter Clock Disable with RC Compare */
+#define		AT91_TC_EEVTEDG		(3 <<  8)	/* Waveform Mode: External Event Edge Selection */
+#define			AT91_TC_EEVTEDG_NONE		(0 << 8)
+#define			AT91_TC_EEVTEDG_RISING		(1 << 8)
+#define			AT91_TC_EEVTEDG_FALLING		(2 << 8)
+#define			AT91_TC_EEVTEDG_BOTH		(3 << 8)
+#define		AT91_TC_EEVT		(3 << 10)	/* Waveform Mode: External Event Selection */
+#define			AT91_TC_EEVT_TIOB		(0 << 10)
+#define			AT91_TC_EEVT_XC0		(1 << 10)
+#define			AT91_TC_EEVT_XC1		(2 << 10)
+#define			AT91_TC_EEVT_XC2		(3 << 10)
+#define		AT91_TC_ENETRG		(1 << 12)	/* Waveform Mode: External Event Trigger Enable */
+#define		AT91_TC_WAVESEL		(3 << 13)	/* Waveform Mode: Waveform Selection */
+#define			AT91_TC_WAVESEL_UP		(0 << 13)
+#define			AT91_TC_WAVESEL_UP_AUTO		(2 << 13)
+#define			AT91_TC_WAVESEL_UPDOWN		(1 << 13)
+#define			AT91_TC_WAVESEL_UPDOWN_AUTO	(3 << 13)
+#define		AT91_TC_ACPA		(3 << 16)	/* Waveform Mode: RA Compare Effect on TIOA */
+#define			AT91_TC_ACPA_NONE		(0 << 16)
+#define			AT91_TC_ACPA_SET		(1 << 16)
+#define			AT91_TC_ACPA_CLEAR		(2 << 16)
+#define			AT91_TC_ACPA_TOGGLE		(3 << 16)
+#define		AT91_TC_ACPC		(3 << 18)	/* Waveform Mode: RC Compre Effect on TIOA */
+#define			AT91_TC_ACPC_NONE		(0 << 18)
+#define			AT91_TC_ACPC_SET		(1 << 18)
+#define			AT91_TC_ACPC_CLEAR		(2 << 18)
+#define			AT91_TC_ACPC_TOGGLE		(3 << 18)
+#define		AT91_TC_AEEVT		(3 << 20)	/* Waveform Mode: External Event Effect on TIOA */
+#define			AT91_TC_AEEVT_NONE		(0 << 20)
+#define			AT91_TC_AEEVT_SET		(1 << 20)
+#define			AT91_TC_AEEVT_CLEAR		(2 << 20)
+#define			AT91_TC_AEEVT_TOGGLE		(3 << 20)
+#define		AT91_TC_ASWTRG		(3 << 22)	/* Waveform Mode: Software Trigger Effect on TIOA */
+#define			AT91_TC_ASWTRG_NONE		(0 << 22)
+#define			AT91_TC_ASWTRG_SET		(1 << 22)
+#define			AT91_TC_ASWTRG_CLEAR		(2 << 22)
+#define			AT91_TC_ASWTRG_TOGGLE		(3 << 22)
+#define		AT91_TC_BCPB		(3 << 24)	/* Waveform Mode: RB Compare Effect on TIOB */
+#define			AT91_TC_BCPB_NONE		(0 << 24)
+#define			AT91_TC_BCPB_SET		(1 << 24)
+#define			AT91_TC_BCPB_CLEAR		(2 << 24)
+#define			AT91_TC_BCPB_TOGGLE		(3 << 24)
+#define		AT91_TC_BCPC		(3 << 26)	/* Waveform Mode: RC Compare Effect on TIOB */
+#define			AT91_TC_BCPC_NONE		(0 << 26)
+#define			AT91_TC_BCPC_SET		(1 << 26)
+#define			AT91_TC_BCPC_CLEAR		(2 << 26)
+#define			AT91_TC_BCPC_TOGGLE		(3 << 26)
+#define		AT91_TC_BEEVT		(3 << 28)	/* Waveform Mode: External Event Effect on TIOB */
+#define			AT91_TC_BEEVT_NONE		(0 << 28)
+#define			AT91_TC_BEEVT_SET		(1 << 28)
+#define			AT91_TC_BEEVT_CLEAR		(2 << 28)
+#define			AT91_TC_BEEVT_TOGGLE		(3 << 28)
+#define		AT91_TC_BSWTRG		(3 << 30)	/* Waveform Mode: Software Trigger Effect on TIOB */
+#define			AT91_TC_BSWTRG_NONE		(0 << 30)
+#define			AT91_TC_BSWTRG_SET		(1 << 30)
+#define			AT91_TC_BSWTRG_CLEAR		(2 << 30)
+#define			AT91_TC_BSWTRG_TOGGLE		(3 << 30)
+
+#define AT91_TC_CV		0x10		/* Counter Value */
+#define AT91_TC_RA		0x14		/* Register A */
+#define AT91_TC_RB		0x18		/* Register B */
+#define AT91_TC_RC		0x1c		/* Register C */
+
+#define AT91_TC_SR		0x20		/* Status Register */
+#define		AT91_TC_COVFS		(1 <<  0)	/* Counter Overflow Status */
+#define		AT91_TC_LOVRS		(1 <<  1)	/* Load Overrun Status */
+#define		AT91_TC_CPAS		(1 <<  2)	/* RA Compare Status */
+#define		AT91_TC_CPBS		(1 <<  3)	/* RB Compare Status */
+#define		AT91_TC_CPCS		(1 <<  4)	/* RC Compare Status */
+#define		AT91_TC_LDRAS		(1 <<  5)	/* RA Loading Status */
+#define		AT91_TC_LDRBS		(1 <<  6)	/* RB Loading Status */
+#define		AT91_TC_ETRGS		(1 <<  7)	/* External Trigger Status */
+#define		AT91_TC_CLKSTA		(1 << 16)	/* Clock Enabling Status */
+#define		AT91_TC_MTIOA		(1 << 17)	/* TIOA Mirror */
+#define		AT91_TC_MTIOB		(1 << 18)	/* TIOB Mirror */
+
+#define AT91_TC_IER		0x24		/* Interrupt Enable Register */
+#define AT91_TC_IDR		0x28		/* Interrupt Disable Register */
+#define AT91_TC_IMR		0x2c		/* Interrupt Mask Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_twi.h b/arch/arm/mach-at91/include/mach/at91_twi.h
new file mode 100644
index 0000000..bb2880f
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_twi.h
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_twi.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Two-wire Interface (TWI) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_TWI_H
+#define AT91_TWI_H
+
+#define	AT91_TWI_CR		0x00		/* Control Register */
+#define		AT91_TWI_START		(1 <<  0)	/* Send a Start Condition */
+#define		AT91_TWI_STOP		(1 <<  1)	/* Send a Stop Condition */
+#define		AT91_TWI_MSEN		(1 <<  2)	/* Master Transfer Enable */
+#define		AT91_TWI_MSDIS		(1 <<  3)	/* Master Transfer Disable */
+#define		AT91_TWI_SVEN		(1 <<  4)	/* Slave Transfer Enable [SAM9260 only] */
+#define		AT91_TWI_SVDIS		(1 <<  5)	/* Slave Transfer Disable [SAM9260 only] */
+#define		AT91_TWI_SWRST		(1 <<  7)	/* Software Reset */
+
+#define	AT91_TWI_MMR		0x04		/* Master Mode Register */
+#define		AT91_TWI_IADRSZ		(3    <<  8)	/* Internal Device Address Size */
+#define			AT91_TWI_IADRSZ_NO		(0 << 8)
+#define			AT91_TWI_IADRSZ_1		(1 << 8)
+#define			AT91_TWI_IADRSZ_2		(2 << 8)
+#define			AT91_TWI_IADRSZ_3		(3 << 8)
+#define		AT91_TWI_MREAD		(1    << 12)	/* Master Read Direction */
+#define		AT91_TWI_DADR		(0x7f << 16)	/* Device Address */
+
+#define	AT91_TWI_SMR		0x08		/* Slave Mode Register [SAM9260 only] */
+#define		AT91_TWI_SADR		(0x7f << 16)	/* Slave Address */
+
+#define	AT91_TWI_IADR		0x0c		/* Internal Address Register */
+
+#define	AT91_TWI_CWGR		0x10		/* Clock Waveform Generator Register */
+#define		AT91_TWI_CLDIV		(0xff <<  0)	/* Clock Low Divisor */
+#define		AT91_TWI_CHDIV		(0xff <<  8)	/* Clock High Divisor */
+#define		AT91_TWI_CKDIV		(7    << 16)	/* Clock Divider */
+
+#define	AT91_TWI_SR		0x20		/* Status Register */
+#define		AT91_TWI_TXCOMP		(1 <<  0)	/* Transmission Complete */
+#define		AT91_TWI_RXRDY		(1 <<  1)	/* Receive Holding Register Ready */
+#define		AT91_TWI_TXRDY		(1 <<  2)	/* Transmit Holding Register Ready */
+#define		AT91_TWI_SVREAD		(1 <<  3)	/* Slave Read [SAM9260 only] */
+#define		AT91_TWI_SVACC		(1 <<  4)	/* Slave Access [SAM9260 only] */
+#define		AT91_TWI_GACC		(1 <<  5)	/* General Call Access [SAM9260 only] */
+#define		AT91_TWI_OVRE		(1 <<  6)	/* Overrun Error [AT91RM9200 only] */
+#define		AT91_TWI_UNRE		(1 <<  7)	/* Underrun Error [AT91RM9200 only] */
+#define		AT91_TWI_NACK		(1 <<  8)	/* Not Acknowledged */
+#define		AT91_TWI_ARBLST		(1 <<  9)	/* Arbitration Lost [SAM9260 only] */
+#define		AT91_TWI_SCLWS		(1 << 10)	/* Clock Wait State [SAM9260 only] */
+#define		AT91_TWI_EOSACC		(1 << 11)	/* End of Slave Address [SAM9260 only] */
+
+#define	AT91_TWI_IER		0x24		/* Interrupt Enable Register */
+#define	AT91_TWI_IDR		0x28		/* Interrupt Disable Register */
+#define	AT91_TWI_IMR		0x2c		/* Interrupt Mask Register */
+#define	AT91_TWI_RHR		0x30		/* Receive Holding Register */
+#define	AT91_TWI_THR		0x34		/* Transmit Holding Register */
+
+#endif
+
diff --git a/arch/arm/mach-at91/include/mach/at91_wdt.h b/arch/arm/mach-at91/include/mach/at91_wdt.h
new file mode 100644
index 0000000..973b452
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_wdt.h
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_wdt.h
+ *
+ * Watchdog Timer (WDT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_WDT_H
+#define AT91_WDT_H
+
+#define AT91_WDT_CR		(AT91_WDT + 0x00)	/* Watchdog Control Register */
+#define		AT91_WDT_WDRSTT		(1    << 0)		/* Restart */
+#define		AT91_WDT_KEY		(0xa5 << 24)		/* KEY Password */
+
+#define AT91_WDT_MR		(AT91_WDT + 0x04)	/* Watchdog Mode Register */
+#define		AT91_WDT_WDV		(0xfff << 0)		/* Counter Value */
+#define		AT91_WDT_WDFIEN		(1     << 12)		/* Fault Interrupt Enable */
+#define		AT91_WDT_WDRSTEN	(1     << 13)		/* Reset Processor */
+#define		AT91_WDT_WDRPROC	(1     << 14)		/* Timer Restart */
+#define		AT91_WDT_WDDIS		(1     << 15)		/* Watchdog Disable */
+#define		AT91_WDT_WDD		(0xfff << 16)		/* Delta Value */
+#define		AT91_WDT_WDDBGHLT	(1     << 28)		/* Debug Halt */
+#define		AT91_WDT_WDIDLEHLT	(1     << 29)		/* Idle Halt */
+
+#define AT91_WDT_SR		(AT91_WDT + 0x08)	/* Watchdog Status Register */
+#define		AT91_WDT_WDUNF		(1 << 0)		/* Watchdog Underflow */
+#define		AT91_WDT_WDERR		(1 << 1)		/* Watchdog Error */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
new file mode 100644
index 0000000..4a4b641
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91cap9.h
@@ -0,0 +1,126 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91cap9.h
+ *
+ *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91CAP9 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_H
+#define AT91CAP9_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91CAP9_ID_PIOABCD	2	/* Parallel IO Controller A, B, C and D */
+#define AT91CAP9_ID_MPB0	3	/* MP Block Peripheral 0 */
+#define AT91CAP9_ID_MPB1	4	/* MP Block Peripheral 1 */
+#define AT91CAP9_ID_MPB2	5	/* MP Block Peripheral 2 */
+#define AT91CAP9_ID_MPB3	6	/* MP Block Peripheral 3 */
+#define AT91CAP9_ID_MPB4	7	/* MP Block Peripheral 4 */
+#define AT91CAP9_ID_US0		8	/* USART 0 */
+#define AT91CAP9_ID_US1		9	/* USART 1 */
+#define AT91CAP9_ID_US2		10	/* USART 2 */
+#define AT91CAP9_ID_MCI0	11	/* Multimedia Card Interface 0 */
+#define AT91CAP9_ID_MCI1	12	/* Multimedia Card Interface 1 */
+#define AT91CAP9_ID_CAN		13	/* CAN */
+#define AT91CAP9_ID_TWI		14	/* Two-Wire Interface */
+#define AT91CAP9_ID_SPI0	15	/* Serial Peripheral Interface 0 */
+#define AT91CAP9_ID_SPI1	16	/* Serial Peripheral Interface 0 */
+#define AT91CAP9_ID_SSC0	17	/* Serial Synchronous Controller 0 */
+#define AT91CAP9_ID_SSC1	18	/* Serial Synchronous Controller 1 */
+#define AT91CAP9_ID_AC97C	19	/* AC97 Controller */
+#define AT91CAP9_ID_TCB		20	/* Timer Counter 0, 1 and 2 */
+#define AT91CAP9_ID_PWMC	21	/* Pulse Width Modulation Controller */
+#define AT91CAP9_ID_EMAC	22	/* Ethernet */
+#define AT91CAP9_ID_AESTDES	23	/* Advanced Encryption Standard, Triple DES */
+#define AT91CAP9_ID_ADC		24	/* Analog-to-Digital Converter */
+#define AT91CAP9_ID_ISI		25	/* Image Sensor Interface */
+#define AT91CAP9_ID_LCDC	26	/* LCD Controller */
+#define AT91CAP9_ID_DMA		27	/* DMA Controller */
+#define AT91CAP9_ID_UDPHS	28	/* USB High Speed Device Port */
+#define AT91CAP9_ID_UHP		29	/* USB Host Port */
+#define AT91CAP9_ID_IRQ0	30	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91CAP9_ID_IRQ1	31	/* Advanced Interrupt Controller (IRQ1) */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91CAP9_BASE_UDPHS		0xfff78000
+#define AT91CAP9_BASE_TCB0		0xfff7c000
+#define AT91CAP9_BASE_TC0		0xfff7c000
+#define AT91CAP9_BASE_TC1		0xfff7c040
+#define AT91CAP9_BASE_TC2		0xfff7c080
+#define AT91CAP9_BASE_MCI0		0xfff80000
+#define AT91CAP9_BASE_MCI1		0xfff84000
+#define AT91CAP9_BASE_TWI		0xfff88000
+#define AT91CAP9_BASE_US0		0xfff8c000
+#define AT91CAP9_BASE_US1		0xfff90000
+#define AT91CAP9_BASE_US2		0xfff94000
+#define AT91CAP9_BASE_SSC0		0xfff98000
+#define AT91CAP9_BASE_SSC1		0xfff9c000
+#define AT91CAP9_BASE_AC97C		0xfffa0000
+#define AT91CAP9_BASE_SPI0		0xfffa4000
+#define AT91CAP9_BASE_SPI1		0xfffa8000
+#define AT91CAP9_BASE_CAN		0xfffac000
+#define AT91CAP9_BASE_PWMC		0xfffb8000
+#define AT91CAP9_BASE_EMAC		0xfffbc000
+#define AT91CAP9_BASE_ADC		0xfffc0000
+#define AT91CAP9_BASE_ISI		0xfffc4000
+#define AT91_BASE_SYS			0xffffe200
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC	(0xffffe200 - AT91_BASE_SYS)
+#define AT91_BCRAMC	(0xffffe400 - AT91_BASE_SYS)
+#define AT91_DDRSDRC	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffeb10 - AT91_BASE_SYS)
+#define AT91_DMA	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91CAP9_BASE_US0
+#define AT91_USART1	AT91CAP9_BASE_US1
+#define AT91_USART2	AT91CAP9_BASE_US2
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91CAP9_SRAM_BASE	0x00100000	/* Internal SRAM base address */
+#define AT91CAP9_SRAM_SIZE	(32 * SZ_1K)	/* Internal SRAM size (32Kb) */
+
+#define AT91CAP9_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91CAP9_ROM_SIZE	(32 * SZ_1K)	/* Internal ROM size (32Kb) */
+
+#define AT91CAP9_LCDC_BASE	0x00500000	/* LCD Controller */
+#define AT91CAP9_UDPHS_FIFO	0x00600000	/* USB High Speed Device Port */
+#define AT91CAP9_UHP_BASE	0x00700000	/* USB Host controller */
+
+#define CONFIG_DRAM_BASE	AT91_CHIPSELECT_6
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
new file mode 100644
index 0000000..bca878f
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
@@ -0,0 +1,100 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
+ *
+ * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
+ * Based on AT91CAP9 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_DDRSDR_H
+#define AT91CAP9_DDRSDR_H
+
+#define AT91_DDRSDRC_MR		(AT91_DDRSDRC + 0x00)	/* Mode Register */
+#define		AT91_DDRSDRC_MODE	(0xf << 0)		/* Command Mode */
+#define			AT91_DDRSDRC_MODE_NORMAL		0
+#define			AT91_DDRSDRC_MODE_NOP		1
+#define			AT91_DDRSDRC_MODE_PRECHARGE	2
+#define			AT91_DDRSDRC_MODE_LMR		3
+#define			AT91_DDRSDRC_MODE_REFRESH	4
+#define			AT91_DDRSDRC_MODE_EXT_LMR	5
+#define			AT91_DDRSDRC_MODE_DEEP		6
+
+#define AT91_DDRSDRC_RTR	(AT91_DDRSDRC + 0x04)	/* Refresh Timer Register */
+#define		AT91_DDRSDRC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
+
+#define AT91_DDRSDRC_CR		(AT91_DDRSDRC + 0x08)	/* Configuration Register */
+#define		AT91_DDRSDRC_NC		(3 << 0)		/* Number of Column Bits */
+#define			AT91_DDRSDRC_NC_SDR8	(0 << 0)
+#define			AT91_DDRSDRC_NC_SDR9	(1 << 0)
+#define			AT91_DDRSDRC_NC_SDR10	(2 << 0)
+#define			AT91_DDRSDRC_NC_SDR11	(3 << 0)
+#define			AT91_DDRSDRC_NC_DDR9	(0 << 0)
+#define			AT91_DDRSDRC_NC_DDR10	(1 << 0)
+#define			AT91_DDRSDRC_NC_DDR11	(2 << 0)
+#define			AT91_DDRSDRC_NC_DDR12	(3 << 0)
+#define		AT91_DDRSDRC_NR		(3 << 2)		/* Number of Row Bits */
+#define			AT91_DDRSDRC_NR_11	(0 << 2)
+#define			AT91_DDRSDRC_NR_12	(1 << 2)
+#define			AT91_DDRSDRC_NR_13	(2 << 2)
+#define		AT91_DDRSDRC_CAS	(7 << 4)		/* CAS Latency */
+#define			AT91_DDRSDRC_CAS_2	(2 << 4)
+#define			AT91_DDRSDRC_CAS_3	(3 << 4)
+#define			AT91_DDRSDRC_CAS_25	(6 << 4)
+#define		AT91_DDRSDRC_DLL	(1 << 7)		/* Reset DLL */
+#define		AT91_DDRSDRC_DICDS	(1 << 8)		/* Output impedance control */
+
+#define AT91_DDRSDRC_T0PR	(AT91_DDRSDRC + 0x0C)	/* Timing 0 Register */
+#define		AT91_DDRSDRC_TRAS	(0xf <<  0)		/* Active to Precharge delay */
+#define		AT91_DDRSDRC_TRCD	(0xf <<  4)		/* Row to Column delay */
+#define		AT91_DDRSDRC_TWR	(0xf <<  8)		/* Write recovery delay */
+#define		AT91_DDRSDRC_TRC	(0xf << 12)		/* Row cycle delay */
+#define		AT91_DDRSDRC_TRP	(0xf << 16)		/* Row precharge delay */
+#define		AT91_DDRSDRC_TRRD	(0xf << 20)		/* Active BankA to BankB */
+#define		AT91_DDRSDRC_TWTR	(1   << 24)		/* Internal Write to Read delay */
+#define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */
+
+#define AT91_DDRSDRC_T1PR	(AT91_DDRSDRC + 0x10)	/* Timing 1 Register */
+#define		AT91_DDRSDRC_TRFC	(0x1f << 0)		/* Row Cycle Delay */
+#define		AT91_DDRSDRC_TXSNR	(0xff << 8)		/* Exit self-refresh to non-read */
+#define		AT91_DDRSDRC_TXSRD	(0xff << 16)		/* Exit self-refresh to read */
+#define		AT91_DDRSDRC_TXP	(0xf  << 24)		/* Exit power-down delay */
+
+#define AT91_DDRSDRC_LPR	(AT91_DDRSDRC + 0x18)	/* Low Power Register */
+#define		AT91_DDRSDRC_LPCB		(3 << 0)	/* Low-power Configurations */
+#define			AT91_DDRSDRC_LPCB_DISABLE		0
+#define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
+#define			AT91_DDRSDRC_LPCB_POWER_DOWN		2
+#define			AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN	3
+#define		AT91_DDRSDRC_CLKFR		(1 << 2)	/* Clock Frozen */
+#define		AT91_DDRSDRC_PASR		(7 << 4)	/* Partial Array Self Refresh */
+#define		AT91_DDRSDRC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
+#define		AT91_DDRSDRC_DS			(3 << 10)	/* Drive Strength */
+#define		AT91_DDRSDRC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
+#define			AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
+#define			AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
+#define			AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
+
+#define AT91_DDRSDRC_MDR	(AT91_DDRSDRC + 0x1C)	/* Memory Device Register */
+#define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
+#define			AT91_DDRSDRC_MD_SDR		0
+#define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
+#define			AT91_DDRSDRC_MD_DDR		2
+#define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
+
+#define AT91_DDRSDRC_DLLR	(AT91_DDRSDRC + 0x20)	/* DLL Information Register */
+#define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
+#define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
+#define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
+#define		AT91_DDRSDRC_SDCOVF	(1 << 3)		/* Slave Delay Correction Overflow */
+#define		AT91_DDRSDRC_SDCUDF	(1 << 4)		/* Slave Delay Correction Underflow */
+#define		AT91_DDRSDRC_SDERF	(1 << 5)		/* Slave Delay Correction error */
+#define		AT91_DDRSDRC_MDVAL	(0xff <<  8)		/* Master Delay value */
+#define		AT91_DDRSDRC_SDVAL	(0xff << 16)		/* Slave Delay value */
+#define		AT91_DDRSDRC_SDCVAL	(0xff << 24)		/* Slave Delay Correction value */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h
new file mode 100644
index 0000000..4b9d4af
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h
@@ -0,0 +1,137 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91cap9_matrix.h
+ *
+ *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ *  Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91CAP9 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_MATRIX_H
+#define AT91CAP9_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG9	(AT91_MATRIX + 0x24)	/* Master Configuration Register 9 */
+#define AT91_MATRIX_MCFG10	(AT91_MATRIX + 0x28)	/* Master Configuration Register 10 */
+#define AT91_MATRIX_MCFG11	(AT91_MATRIX + 0x2C)	/* Master Configuration Register 11 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
+#define AT91_MATRIX_SCFG8	(AT91_MATRIX + 0x60)	/* Slave Configuration Register 8 */
+#define AT91_MATRIX_SCFG9	(AT91_MATRIX + 0x64)	/* Slave Configuration Register 9 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
+#define AT91_MATRIX_PRAS8	(AT91_MATRIX + 0xC0)	/* Priority Register A for Slave 8 */
+#define AT91_MATRIX_PRBS8	(AT91_MATRIX + 0xC4)	/* Priority Register B for Slave 8 */
+#define AT91_MATRIX_PRAS9	(AT91_MATRIX + 0xC8)	/* Priority Register A for Slave 9 */
+#define AT91_MATRIX_PRBS9	(AT91_MATRIX + 0xCC)	/* Priority Register B for Slave 9 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
+#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
+#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
+#define		AT91_MATRIX_M9PR		(3 << 4)	/* Master 9 Priority (in Register B) */
+#define		AT91_MATRIX_M10PR		(3 << 8)	/* Master 10 Priority (in Register B) */
+#define		AT91_MATRIX_M11PR		(3 << 12)	/* Master 11 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+#define		AT91_MATRIX_RCB6		(1 << 6)
+#define		AT91_MATRIX_RCB7		(1 << 7)
+#define		AT91_MATRIX_RCB8		(1 << 8)
+#define		AT91_MATRIX_RCB9		(1 << 9)
+#define		AT91_MATRIX_RCB10		(1 << 10)
+#define		AT91_MATRIX_RCB11		(1 << 11)
+
+#define AT91_MPBS0_SFR		(AT91_MATRIX + 0x114)	/* MPBlock Slave 0 Special Function Register */
+#define AT91_MPBS1_SFR		(AT91_MATRIX + 0x11C)	/* MPBlock Slave 1 Special Function Register */
+
+#define AT91_MATRIX_UDPHS	(AT91_MATRIX + 0x118)	/* USBHS Special Function Register [AT91CAP9 only] */
+#define		AT91_MATRIX_SELECT_UDPHS	(0 << 31)	/* select High Speed UDP */
+#define		AT91_MATRIX_SELECT_UDP		(1 << 31)	/* select standard UDP */
+#define		AT91_MATRIX_UDPHS_BYPASS_LOCK	(1 << 30)	/* bypass lock bit */
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI_CS1A_BCRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_EBI_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_EBI_CS4A_SMC_CF1		(1 << 4)
+#define		AT91_MATRIX_EBI_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_EBI_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_EBI_CS5A_SMC_CF2		(1 << 5)
+#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_EBI_DQSPDC		(1 << 9)	/* Data Qualifier Strobe Pull-Down Configuration */
+#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
+
+#define AT91_MPBS2_SFR		(AT91_MATRIX + 0x12C)	/* MPBlock Slave 2 Special Function Register */
+#define AT91_MPBS3_SFR		(AT91_MATRIX + 0x130)	/* MPBlock Slave 3 Special Function Register */
+#define AT91_APB_SFR		(AT91_MATRIX + 0x134)	/* APB Bridge Special Function Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
new file mode 100644
index 0000000..7898315
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91rm9200.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Common definitions.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_H
+#define AT91RM9200_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripheral */
+#define AT91RM9200_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91RM9200_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91RM9200_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91RM9200_ID_PIOD	5	/* Parallel IO Controller D */
+#define AT91RM9200_ID_US0	6	/* USART 0 */
+#define AT91RM9200_ID_US1	7	/* USART 1 */
+#define AT91RM9200_ID_US2	8	/* USART 2 */
+#define AT91RM9200_ID_US3	9	/* USART 3 */
+#define AT91RM9200_ID_MCI	10	/* Multimedia Card Interface */
+#define AT91RM9200_ID_UDP	11	/* USB Device Port */
+#define AT91RM9200_ID_TWI	12	/* Two-Wire Interface */
+#define AT91RM9200_ID_SPI	13	/* Serial Peripheral Interface */
+#define AT91RM9200_ID_SSC0	14	/* Serial Synchronous Controller 0 */
+#define AT91RM9200_ID_SSC1	15	/* Serial Synchronous Controller 1 */
+#define AT91RM9200_ID_SSC2	16	/* Serial Synchronous Controller 2 */
+#define AT91RM9200_ID_TC0	17	/* Timer Counter 0 */
+#define AT91RM9200_ID_TC1	18	/* Timer Counter 1 */
+#define AT91RM9200_ID_TC2	19	/* Timer Counter 2 */
+#define AT91RM9200_ID_TC3	20	/* Timer Counter 3 */
+#define AT91RM9200_ID_TC4	21	/* Timer Counter 4 */
+#define AT91RM9200_ID_TC5	22	/* Timer Counter 5 */
+#define AT91RM9200_ID_UHP	23	/* USB Host port */
+#define AT91RM9200_ID_EMAC	24	/* Ethernet MAC */
+#define AT91RM9200_ID_IRQ0	25	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91RM9200_ID_IRQ1	26	/* Advanced Interrupt Controller (IRQ1) */
+#define AT91RM9200_ID_IRQ2	27	/* Advanced Interrupt Controller (IRQ2) */
+#define AT91RM9200_ID_IRQ3	28	/* Advanced Interrupt Controller (IRQ3) */
+#define AT91RM9200_ID_IRQ4	29	/* Advanced Interrupt Controller (IRQ4) */
+#define AT91RM9200_ID_IRQ5	30	/* Advanced Interrupt Controller (IRQ5) */
+#define AT91RM9200_ID_IRQ6	31	/* Advanced Interrupt Controller (IRQ6) */
+
+
+/*
+ * Peripheral physical base addresses.
+ */
+#define AT91RM9200_BASE_TCB0	0xfffa0000
+#define AT91RM9200_BASE_TC0	0xfffa0000
+#define AT91RM9200_BASE_TC1	0xfffa0040
+#define AT91RM9200_BASE_TC2	0xfffa0080
+#define AT91RM9200_BASE_TCB1	0xfffa4000
+#define AT91RM9200_BASE_TC3	0xfffa4000
+#define AT91RM9200_BASE_TC4	0xfffa4040
+#define AT91RM9200_BASE_TC5	0xfffa4080
+#define AT91RM9200_BASE_UDP	0xfffb0000
+#define AT91RM9200_BASE_MCI	0xfffb4000
+#define AT91RM9200_BASE_TWI	0xfffb8000
+#define AT91RM9200_BASE_EMAC	0xfffbc000
+#define AT91RM9200_BASE_US0	0xfffc0000
+#define AT91RM9200_BASE_US1	0xfffc4000
+#define AT91RM9200_BASE_US2	0xfffc8000
+#define AT91RM9200_BASE_US3	0xfffcc000
+#define AT91RM9200_BASE_SSC0	0xfffd0000
+#define AT91RM9200_BASE_SSC1	0xfffd4000
+#define AT91RM9200_BASE_SSC2	0xfffd8000
+#define AT91RM9200_BASE_SPI	0xfffe0000
+#define AT91_BASE_SYS		0xfffff000
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)	/* Advanced Interrupt Controller */
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)	/* Debug Unit */
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)	/* PIO Controller A */
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)	/* PIO Controller B */
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)	/* PIO Controller C */
+#define AT91_PIOD	(0xfffffa00 - AT91_BASE_SYS)	/* PIO Controller D */
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)	/* Power Management Controller */
+#define AT91_ST		(0xfffffd00 - AT91_BASE_SYS)	/* System Timer */
+#define AT91_RTC	(0xfffffe00 - AT91_BASE_SYS)	/* Real-Time Clock */
+#define AT91_MC		(0xffffff00 - AT91_BASE_SYS)	/* Memory Controllers */
+
+#define AT91_USART0	AT91RM9200_BASE_US0
+#define AT91_USART1	AT91RM9200_BASE_US1
+#define AT91_USART2	AT91RM9200_BASE_US2
+#define AT91_USART3	AT91RM9200_BASE_US3
+
+#define AT91_MATRIX	0	/* not supported */
+
+/*
+ * Internal Memory.
+ */
+#define AT91RM9200_ROM_BASE	0x00100000	/* Internal ROM base address */
+#define AT91RM9200_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
+
+#define AT91RM9200_SRAM_BASE	0x00200000	/* Internal SRAM base address */
+#define AT91RM9200_SRAM_SIZE	SZ_16K		/* Internal SRAM size (16Kb) */
+
+#define AT91RM9200_UHP_BASE	0x00300000	/* USB Host controller */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_emac.h b/arch/arm/mach-at91/include/mach/at91rm9200_emac.h
new file mode 100644
index 0000000..b8260cd
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91rm9200_emac.h
@@ -0,0 +1,138 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91rm9200_emac.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Ethernet MAC registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_EMAC_H
+#define AT91RM9200_EMAC_H
+
+#define	AT91_EMAC_CTL		0x00	/* Control Register */
+#define		AT91_EMAC_LB		(1 <<  0)	/* Loopback */
+#define		AT91_EMAC_LBL		(1 <<  1)	/* Loopback Local */
+#define		AT91_EMAC_RE		(1 <<  2)	/* Receive Enable */
+#define		AT91_EMAC_TE		(1 <<  3)	/* Transmit Enable */
+#define		AT91_EMAC_MPE		(1 <<  4)	/* Management Port Enable */
+#define		AT91_EMAC_CSR		(1 <<  5)	/* Clear Statistics Registers */
+#define		AT91_EMAC_INCSTAT	(1 <<  6)	/* Increment Statistics Registers */
+#define		AT91_EMAC_WES		(1 <<  7)	/* Write Enable for Statistics Registers */
+#define		AT91_EMAC_BP		(1 <<  8)	/* Back Pressure */
+
+#define	AT91_EMAC_CFG		0x04	/* Configuration Register */
+#define		AT91_EMAC_SPD		(1 <<  0)	/* Speed */
+#define		AT91_EMAC_FD		(1 <<  1)	/* Full Duplex */
+#define		AT91_EMAC_BR		(1 <<  2)	/* Bit Rate */
+#define		AT91_EMAC_CAF		(1 <<  4)	/* Copy All Frames */
+#define		AT91_EMAC_NBC		(1 <<  5)	/* No Broadcast */
+#define		AT91_EMAC_MTI		(1 <<  6)	/* Multicast Hash Enable */
+#define		AT91_EMAC_UNI		(1 <<  7)	/* Unicast Hash Enable */
+#define		AT91_EMAC_BIG		(1 <<  8)	/* Receive 1522 Bytes */
+#define		AT91_EMAC_EAE		(1 <<  9)	/* External Address Match Enable */
+#define		AT91_EMAC_CLK		(3 << 10)	/* MDC Clock Divisor */
+#define		AT91_EMAC_CLK_DIV8		(0 << 10)
+#define		AT91_EMAC_CLK_DIV16		(1 << 10)
+#define		AT91_EMAC_CLK_DIV32		(2 << 10)
+#define		AT91_EMAC_CLK_DIV64		(3 << 10)
+#define		AT91_EMAC_RTY		(1 << 12)	/* Retry Test */
+#define		AT91_EMAC_RMII		(1 << 13)	/* Reduce MII (RMII) */
+
+#define	AT91_EMAC_SR		0x08	/* Status Register */
+#define		AT91_EMAC_SR_LINK	(1 <<  0)	/* Link */
+#define		AT91_EMAC_SR_MDIO	(1 <<  1)	/* MDIO pin */
+#define		AT91_EMAC_SR_IDLE	(1 <<  2)	/* PHY idle */
+
+#define	AT91_EMAC_TAR		0x0c	/* Transmit Address Register */
+
+#define	AT91_EMAC_TCR		0x10	/* Transmit Control Register */
+#define		AT91_EMAC_LEN		(0x7ff << 0)	/* Transmit Frame Length */
+#define		AT91_EMAC_NCRC		(1     << 15)	/* No CRC */
+
+#define	AT91_EMAC_TSR		0x14	/* Transmit Status Register */
+#define		AT91_EMAC_TSR_OVR	(1 <<  0)	/* Transmit Buffer Overrun */
+#define		AT91_EMAC_TSR_COL	(1 <<  1)	/* Collision Occurred */
+#define		AT91_EMAC_TSR_RLE	(1 <<  2)	/* Retry Limit Exceeded */
+#define		AT91_EMAC_TSR_IDLE	(1 <<  3)	/* Transmitter Idle */
+#define		AT91_EMAC_TSR_BNQ	(1 <<  4)	/* Transmit Buffer not Queued */
+#define		AT91_EMAC_TSR_COMP	(1 <<  5)	/* Transmit Complete */
+#define		AT91_EMAC_TSR_UND	(1 <<  6)	/* Transmit Underrun */
+
+#define	AT91_EMAC_RBQP		0x18	/* Receive Buffer Queue Pointer */
+
+#define	AT91_EMAC_RSR		0x20	/* Receive Status Register */
+#define		AT91_EMAC_RSR_BNA	(1 <<  0)	/* Buffer Not Available */
+#define		AT91_EMAC_RSR_REC	(1 <<  1)	/* Frame Received */
+#define		AT91_EMAC_RSR_OVR	(1 <<  2)	/* RX Overrun */
+
+#define	AT91_EMAC_ISR		0x24	/* Interrupt Status Register */
+#define		AT91_EMAC_DONE		(1 <<  0)	/* Management Done */
+#define		AT91_EMAC_RCOM		(1 <<  1)	/* Receive Complete */
+#define		AT91_EMAC_RBNA		(1 <<  2)	/* Receive Buffer Not Available */
+#define		AT91_EMAC_TOVR		(1 <<  3)	/* Transmit Buffer Overrun */
+#define		AT91_EMAC_TUND		(1 <<  4)	/* Transmit Buffer Underrun */
+#define		AT91_EMAC_RTRY		(1 <<  5)	/* Retry Limit */
+#define		AT91_EMAC_TBRE		(1 <<  6)	/* Transmit Buffer Register Empty */
+#define		AT91_EMAC_TCOM		(1 <<  7)	/* Transmit Complete */
+#define		AT91_EMAC_TIDLE		(1 <<  8)	/* Transmit Idle */
+#define		AT91_EMAC_LINK		(1 <<  9)	/* Link */
+#define		AT91_EMAC_ROVR		(1 << 10)	/* RX Overrun */
+#define		AT91_EMAC_ABT		(1 << 11)	/* Abort */
+
+#define	AT91_EMAC_IER		0x28	/* Interrupt Enable Register */
+#define	AT91_EMAC_IDR		0x2c	/* Interrupt Disable Register */
+#define	AT91_EMAC_IMR		0x30	/* Interrupt Mask Register */
+
+#define	AT91_EMAC_MAN		0x34	/* PHY Maintenance Register */
+#define		AT91_EMAC_DATA		(0xffff << 0)	/* MDIO Data */
+#define		AT91_EMAC_REGA		(0x1f	<< 18)	/* MDIO Register */
+#define		AT91_EMAC_PHYA		(0x1f	<< 23)	/* MDIO PHY Address */
+#define		AT91_EMAC_RW		(3	<< 28)	/* Read/Write operation */
+#define			AT91_EMAC_RW_W		(1 << 28)
+#define			AT91_EMAC_RW_R		(2 << 28)
+#define		AT91_EMAC_MAN_802_3	0x40020000	/* IEEE 802.3 value */
+
+/*
+ * Statistics Registers.
+ */
+#define AT91_EMAC_FRA		0x40	/* Frames Transmitted OK */
+#define AT91_EMAC_SCOL		0x44	/* Single Collision Frame */
+#define AT91_EMAC_MCOL		0x48	/* Multiple Collision Frame */
+#define AT91_EMAC_OK		0x4c	/* Frames Received OK */
+#define AT91_EMAC_SEQE		0x50	/* Frame Check Sequence Error */
+#define AT91_EMAC_ALE		0x54	/* Alignmemt Error */
+#define AT91_EMAC_DTE		0x58	/* Deffered Transmission Frame */
+#define AT91_EMAC_LCOL		0x5c	/* Late Collision */
+#define AT91_EMAC_ECOL		0x60	/* Excessive Collision */
+#define AT91_EMAC_TUE		0x64	/* Transmit Underrun Error */
+#define AT91_EMAC_CSE		0x68	/* Carrier Sense Error */
+#define AT91_EMAC_DRFC		0x6c	/* Discard RX Frame */
+#define AT91_EMAC_ROV		0x70	/* Receive Overrun */
+#define AT91_EMAC_CDE		0x74	/* Code Error */
+#define AT91_EMAC_ELR		0x78	/* Excessive Length Error */
+#define AT91_EMAC_RJB		0x7c	/* Receive Jabber */
+#define AT91_EMAC_USF		0x80	/* Undersize Frame */
+#define AT91_EMAC_SQEE		0x84	/* SQE Test Error */
+
+/*
+ * Address Registers.
+ */
+#define AT91_EMAC_HSL		0x90	/* Hash Address Low [31:0] */
+#define AT91_EMAC_HSH		0x94	/* Hash Address High [63:32] */
+#define AT91_EMAC_SA1L		0x98	/* Specific Address 1 Low, bytes 0-3 */
+#define AT91_EMAC_SA1H		0x9c	/* Specific Address 1 High, bytes 4-5 */
+#define AT91_EMAC_SA2L		0xa0	/* Specific Address 2 Low, bytes 0-3 */
+#define AT91_EMAC_SA2H		0xa4	/* Specific Address 2 High, bytes 4-5 */
+#define AT91_EMAC_SA3L		0xa8	/* Specific Address 3 Low, bytes 0-3 */
+#define AT91_EMAC_SA3H		0xac	/* Specific Address 3 High, bytes 4-5 */
+#define AT91_EMAC_SA4L		0xb0	/* Specific Address 4 Low, bytes 0-3 */
+#define AT91_EMAC_SA4H		0xb4	/* Specific Address 4 High, bytes 4-5 */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_mc.h b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
new file mode 100644
index 0000000..d34e4ed
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
@@ -0,0 +1,160 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91rm9200_mc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_MC_H
+#define AT91RM9200_MC_H
+
+/* Memory Controller */
+#define AT91_MC_RCR		(AT91_MC + 0x00)	/* MC Remap Control Register */
+#define		AT91_MC_RCB		(1 <<  0)		/* Remap Command Bit */
+
+#define AT91_MC_ASR		(AT91_MC + 0x04)	/* MC Abort Status Register */
+#define		AT91_MC_UNADD		(1 <<  0)		/* Undefined Address Abort Status */
+#define		AT91_MC_MISADD		(1 <<  1)		/* Misaligned Address Abort Status */
+#define		AT91_MC_ABTSZ		(3 <<  8)		/* Abort Size Status */
+#define			AT91_MC_ABTSZ_BYTE		(0 << 8)
+#define			AT91_MC_ABTSZ_HALFWORD		(1 << 8)
+#define			AT91_MC_ABTSZ_WORD		(2 << 8)
+#define		AT91_MC_ABTTYP		(3 << 10)		/* Abort Type Status */
+#define			AT91_MC_ABTTYP_DATAREAD		(0 << 10)
+#define			AT91_MC_ABTTYP_DATAWRITE	(1 << 10)
+#define			AT91_MC_ABTTYP_FETCH		(2 << 10)
+#define		AT91_MC_MST0		(1 << 16)		/* ARM920T Abort Source */
+#define		AT91_MC_MST1		(1 << 17)		/* PDC Abort Source */
+#define		AT91_MC_MST2		(1 << 18)		/* UHP Abort Source */
+#define		AT91_MC_MST3		(1 << 19)		/* EMAC Abort Source */
+#define		AT91_MC_SVMST0		(1 << 24)		/* Saved ARM920T Abort Source */
+#define		AT91_MC_SVMST1		(1 << 25)		/* Saved PDC Abort Source */
+#define		AT91_MC_SVMST2		(1 << 26)		/* Saved UHP Abort Source */
+#define		AT91_MC_SVMST3		(1 << 27)		/* Saved EMAC Abort Source */
+
+#define AT91_MC_AASR		(AT91_MC + 0x08)	/* MC Abort Address Status Register */
+
+#define AT91_MC_MPR		(AT91_MC + 0x0c)	/* MC Master Priority Register */
+#define		AT91_MPR_MSTP0		(7 <<  0)		/* ARM920T Priority */
+#define		AT91_MPR_MSTP1		(7 <<  4)		/* PDC Priority */
+#define		AT91_MPR_MSTP2		(7 <<  8)		/* UHP Priority */
+#define		AT91_MPR_MSTP3		(7 << 12)		/* EMAC Priority */
+
+/* External Bus Interface (EBI) registers */
+#define AT91_EBI_CSA		(AT91_MC + 0x60)	/* Chip Select Assignment Register */
+#define		AT91_EBI_CS0A		(1 << 0)		/* Chip Select 0 Assignment */
+#define			AT91_EBI_CS0A_SMC		(0 << 0)
+#define			AT91_EBI_CS0A_BFC		(1 << 0)
+#define		AT91_EBI_CS1A		(1 << 1)		/* Chip Select 1 Assignment */
+#define			AT91_EBI_CS1A_SMC		(0 << 1)
+#define			AT91_EBI_CS1A_SDRAMC		(1 << 1)
+#define		AT91_EBI_CS3A		(1 << 3)		/* Chip Select 2 Assignment */
+#define			AT91_EBI_CS3A_SMC		(0 << 3)
+#define			AT91_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_EBI_CS4A		(1 << 4)		/* Chip Select 3 Assignment */
+#define			AT91_EBI_CS4A_SMC		(0 << 4)
+#define			AT91_EBI_CS4A_SMC_COMPACTFLASH	(1 << 4)
+#define AT91_EBI_CFGR		(AT91_MC + 0x64)	/* Configuration Register */
+#define		AT91_EBI_DBPUC		(1 << 0)		/* Data Bus Pull-Up Configuration */
+
+/* Static Memory Controller (SMC) registers */
+#define	AT91_SMC_CSR(n)		(AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */
+#define		AT91_SMC_NWS		(0x7f <<  0)		/* Number of Wait States */
+#define			AT91_SMC_NWS_(x)	((x) << 0)
+#define		AT91_SMC_WSEN		(1    <<  7)		/* Wait State Enable */
+#define		AT91_SMC_TDF		(0xf  <<  8)		/* Data Float Time */
+#define			AT91_SMC_TDF_(x)	((x) << 8)
+#define		AT91_SMC_BAT		(1    << 12)		/* Byte Access Type */
+#define		AT91_SMC_DBW		(3    << 13)		/* Data Bus Width */
+#define			AT91_SMC_DBW_16		(1 << 13)
+#define			AT91_SMC_DBW_8		(2 << 13)
+#define		AT91_SMC_DPR		(1 << 15)		/* Data Read Protocol */
+#define		AT91_SMC_ACSS		(3 << 16)		/* Address to Chip Select Setup */
+#define			AT91_SMC_ACSS_STD	(0 << 16)
+#define			AT91_SMC_ACSS_1		(1 << 16)
+#define			AT91_SMC_ACSS_2		(2 << 16)
+#define			AT91_SMC_ACSS_3		(3 << 16)
+#define		AT91_SMC_RWSETUP	(7 << 24)		/* Read & Write Signal Time Setup */
+#define			AT91_SMC_RWSETUP_(x)	((x) << 24)
+#define		AT91_SMC_RWHOLD		(7 << 28)		/* Read & Write Signal Hold Time */
+#define			AT91_SMC_RWHOLD_(x)	((x) << 28)
+
+/* SDRAM Controller registers */
+#define AT91_SDRAMC_MR		(AT91_MC + 0x90)	/* Mode Register */
+#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
+#define			AT91_SDRAMC_MODE_NORMAL		(0 << 0)
+#define			AT91_SDRAMC_MODE_NOP		(1 << 0)
+#define			AT91_SDRAMC_MODE_PRECHARGE	(2 << 0)
+#define			AT91_SDRAMC_MODE_LMR		(3 << 0)
+#define			AT91_SDRAMC_MODE_REFRESH	(4 << 0)
+#define		AT91_SDRAMC_DBW		(1   << 4)		/* Data Bus Width */
+#define			AT91_SDRAMC_DBW_32	(0 << 4)
+#define			AT91_SDRAMC_DBW_16	(1 << 4)
+
+#define AT91_SDRAMC_TR		(AT91_MC + 0x94)	/* Refresh Timer Register */
+#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Count */
+
+#define AT91_SDRAMC_CR		(AT91_MC + 0x98)	/* Configuration Register */
+#define		AT91_SDRAMC_NC		(3   <<  0)		/* Number of Column Bits */
+#define			AT91_SDRAMC_NC_8	(0 << 0)
+#define			AT91_SDRAMC_NC_9	(1 << 0)
+#define			AT91_SDRAMC_NC_10	(2 << 0)
+#define			AT91_SDRAMC_NC_11	(3 << 0)
+#define		AT91_SDRAMC_NR		(3   <<  2)		/* Number of Row Bits */
+#define			AT91_SDRAMC_NR_11	(0 << 2)
+#define			AT91_SDRAMC_NR_12	(1 << 2)
+#define			AT91_SDRAMC_NR_13	(2 << 2)
+#define		AT91_SDRAMC_NB		(1   <<  4)		/* Number of Banks */
+#define			AT91_SDRAMC_NB_2	(0 << 4)
+#define			AT91_SDRAMC_NB_4	(1 << 4)
+#define		AT91_SDRAMC_CAS		(3   <<  5)		/* CAS Latency */
+#define			AT91_SDRAMC_CAS_2	(2 << 5)
+#define		AT91_SDRAMC_TWR		(0xf <<  7)		/* Write Recovery Delay */
+#define		AT91_SDRAMC_TRC		(0xf << 11)		/* Row Cycle Delay */
+#define		AT91_SDRAMC_TRP		(0xf << 15)		/* Row Precharge Delay */
+#define		AT91_SDRAMC_TRCD	(0xf << 19)		/* Row to Column Delay */
+#define		AT91_SDRAMC_TRAS	(0xf << 23)		/* Active to Precharge Delay */
+#define		AT91_SDRAMC_TXSR	(0xf << 27)		/* Exit Self Refresh to Active Delay */
+
+#define AT91_SDRAMC_SRR		(AT91_MC + 0x9c)	/* Self Refresh Register */
+#define AT91_SDRAMC_LPR		(AT91_MC + 0xa0)	/* Low Power Register */
+#define AT91_SDRAMC_IER		(AT91_MC + 0xa4)	/* Interrupt Enable Register */
+#define AT91_SDRAMC_IDR		(AT91_MC + 0xa8)	/* Interrupt Disable Register */
+#define AT91_SDRAMC_IMR		(AT91_MC + 0xac)	/* Interrupt Mask Register */
+#define AT91_SDRAMC_ISR		(AT91_MC + 0xb0)	/* Interrupt Status Register */
+
+/* Burst Flash Controller register */
+#define AT91_BFC_MR		(AT91_MC + 0xc0)	/* Mode Register */
+#define		AT91_BFC_BFCOM		(3   <<  0)		/* Burst Flash Controller Operating Mode */
+#define			AT91_BFC_BFCOM_DISABLED	(0 << 0)
+#define			AT91_BFC_BFCOM_ASYNC	(1 << 0)
+#define			AT91_BFC_BFCOM_BURST	(2 << 0)
+#define		AT91_BFC_BFCC		(3   <<  2)		/* Burst Flash Controller Clock */
+#define			AT91_BFC_BFCC_MCK	(1 << 2)
+#define			AT91_BFC_BFCC_DIV2	(2 << 2)
+#define			AT91_BFC_BFCC_DIV4	(3 << 2)
+#define		AT91_BFC_AVL		(0xf <<  4)		/* Address Valid Latency */
+#define		AT91_BFC_PAGES		(7   <<  8)		/* Page Size */
+#define			AT91_BFC_PAGES_NO_PAGE	(0 << 8)
+#define			AT91_BFC_PAGES_16	(1 << 8)
+#define			AT91_BFC_PAGES_32	(2 << 8)
+#define			AT91_BFC_PAGES_64	(3 << 8)
+#define			AT91_BFC_PAGES_128	(4 << 8)
+#define			AT91_BFC_PAGES_256	(5 << 8)
+#define			AT91_BFC_PAGES_512	(6 << 8)
+#define			AT91_BFC_PAGES_1024	(7 << 8)
+#define		AT91_BFC_OEL		(3   << 12)		/* Output Enable Latency */
+#define		AT91_BFC_BAAEN		(1   << 16)		/* Burst Address Advance Enable */
+#define		AT91_BFC_BFOEH		(1   << 17)		/* Burst Flash Output Enable Handling */
+#define		AT91_BFC_MUXEN		(1   << 18)		/* Multiplexed Bus Enable */
+#define		AT91_BFC_RDYEN		(1   << 19)		/* Ready Enable Mode */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
new file mode 100644
index 0000000..43c396b
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -0,0 +1,138 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9260.h
+ *
+ * (C) 2006 Andrew Victor
+ *
+ * Common definitions.
+ * Based on AT91SAM9260 datasheet revision A (Preliminary).
+ *
+ * Includes also definitions for AT91SAM9XE and AT91SAM9G families
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9260_H
+#define AT91SAM9260_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91SAM9260_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9260_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9260_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91SAM9260_ID_ADC	5	/* Analog-to-Digital Converter */
+#define AT91SAM9260_ID_US0	6	/* USART 0 */
+#define AT91SAM9260_ID_US1	7	/* USART 1 */
+#define AT91SAM9260_ID_US2	8	/* USART 2 */
+#define AT91SAM9260_ID_MCI	9	/* Multimedia Card Interface */
+#define AT91SAM9260_ID_UDP	10	/* USB Device Port */
+#define AT91SAM9260_ID_TWI	11	/* Two-Wire Interface */
+#define AT91SAM9260_ID_SPI0	12	/* Serial Peripheral Interface 0 */
+#define AT91SAM9260_ID_SPI1	13	/* Serial Peripheral Interface 1 */
+#define AT91SAM9260_ID_SSC	14	/* Serial Synchronous Controller */
+#define AT91SAM9260_ID_TC0	17	/* Timer Counter 0 */
+#define AT91SAM9260_ID_TC1	18	/* Timer Counter 1 */
+#define AT91SAM9260_ID_TC2	19	/* Timer Counter 2 */
+#define AT91SAM9260_ID_UHP	20	/* USB Host port */
+#define AT91SAM9260_ID_EMAC	21	/* Ethernet */
+#define AT91SAM9260_ID_ISI	22	/* Image Sensor Interface */
+#define AT91SAM9260_ID_US3	23	/* USART 3 */
+#define AT91SAM9260_ID_US4	24	/* USART 4 */
+#define AT91SAM9260_ID_US5	25	/* USART 5 */
+#define AT91SAM9260_ID_TC3	26	/* Timer Counter 3 */
+#define AT91SAM9260_ID_TC4	27	/* Timer Counter 4 */
+#define AT91SAM9260_ID_TC5	28	/* Timer Counter 5 */
+#define AT91SAM9260_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9260_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
+#define AT91SAM9260_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9260_BASE_TCB0		0xfffa0000
+#define AT91SAM9260_BASE_TC0		0xfffa0000
+#define AT91SAM9260_BASE_TC1		0xfffa0040
+#define AT91SAM9260_BASE_TC2		0xfffa0080
+#define AT91SAM9260_BASE_UDP		0xfffa4000
+#define AT91SAM9260_BASE_MCI		0xfffa8000
+#define AT91SAM9260_BASE_TWI		0xfffac000
+#define AT91SAM9260_BASE_US0		0xfffb0000
+#define AT91SAM9260_BASE_US1		0xfffb4000
+#define AT91SAM9260_BASE_US2		0xfffb8000
+#define AT91SAM9260_BASE_SSC		0xfffbc000
+#define AT91SAM9260_BASE_ISI		0xfffc0000
+#define AT91SAM9260_BASE_EMAC		0xfffc4000
+#define AT91SAM9260_BASE_SPI0		0xfffc8000
+#define AT91SAM9260_BASE_SPI1		0xfffcc000
+#define AT91SAM9260_BASE_US3		0xfffd0000
+#define AT91SAM9260_BASE_US4		0xfffd4000
+#define AT91SAM9260_BASE_US5		0xfffd8000
+#define AT91SAM9260_BASE_TCB1		0xfffdc000
+#define AT91SAM9260_BASE_TC3		0xfffdc000
+#define AT91SAM9260_BASE_TC4		0xfffdc040
+#define AT91SAM9260_BASE_TC5		0xfffdc080
+#define AT91SAM9260_BASE_ADC		0xfffe0000
+#define AT91_BASE_SYS			0xffffe800
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9260_BASE_US0
+#define AT91_USART1	AT91SAM9260_BASE_US1
+#define AT91_USART2	AT91SAM9260_BASE_US2
+#define AT91_USART3	AT91SAM9260_BASE_US3
+#define AT91_USART4	AT91SAM9260_BASE_US4
+#define AT91_USART5	AT91SAM9260_BASE_US5
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9260_ROM_BASE	0x00100000	/* Internal ROM base address */
+#define AT91SAM9260_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
+
+#define AT91SAM9260_SRAM0_BASE	0x00200000	/* Internal SRAM 0 base address */
+#define AT91SAM9260_SRAM0_SIZE	SZ_4K		/* Internal SRAM 0 size (4Kb) */
+#define AT91SAM9260_SRAM1_BASE	0x00300000	/* Internal SRAM 1 base address */
+#define AT91SAM9260_SRAM1_SIZE	SZ_4K		/* Internal SRAM 1 size (4Kb) */
+
+#define AT91SAM9260_UHP_BASE	0x00500000	/* USB Host controller */
+
+#define AT91SAM9XE_FLASH_BASE	0x00200000	/* Internal FLASH base address */
+#define AT91SAM9XE_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+
+#define AT91SAM9G20_ROM_BASE	0x00100000	/* Internal ROM base address */
+#define AT91SAM9G20_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
+
+#define AT91SAM9G20_SRAM0_BASE	0x00200000	/* Internal SRAM 0 base address */
+#define AT91SAM9G20_SRAM0_SIZE	SZ_16K		/* Internal SRAM 0 size (16Kb) */
+#define AT91SAM9G20_SRAM1_BASE	0x00300000	/* Internal SRAM 1 base address */
+#define AT91SAM9G20_SRAM1_SIZE	SZ_16K		/* Internal SRAM 1 size (16Kb) */
+
+#define AT91SAM9G20_UHP_BASE	0x00500000	/* USB Host controller */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
new file mode 100644
index 0000000..f027de5
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9260_MATRIX_H
+#define AT91SAM9260_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define		AT91_MATRIX_ULBT		(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff <<  0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x11C)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
+#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
+#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
+#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
new file mode 100644
index 0000000..3a348ca
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -0,0 +1,105 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9261.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Common definitions.
+ * Based on AT91SAM9261 datasheet revision E. (Preliminary)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_H
+#define AT91SAM9261_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91SAM9261_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9261_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9261_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91SAM9261_ID_US0	6	/* USART 0 */
+#define AT91SAM9261_ID_US1	7	/* USART 1 */
+#define AT91SAM9261_ID_US2	8	/* USART 2 */
+#define AT91SAM9261_ID_MCI	9	/* Multimedia Card Interface */
+#define AT91SAM9261_ID_UDP	10	/* USB Device Port */
+#define AT91SAM9261_ID_TWI	11	/* Two-Wire Interface */
+#define AT91SAM9261_ID_SPI0	12	/* Serial Peripheral Interface 0 */
+#define AT91SAM9261_ID_SPI1	13	/* Serial Peripheral Interface 1 */
+#define AT91SAM9261_ID_SSC0	14	/* Serial Synchronous Controller 0 */
+#define AT91SAM9261_ID_SSC1	15	/* Serial Synchronous Controller 1 */
+#define AT91SAM9261_ID_SSC2	16	/* Serial Synchronous Controller 2 */
+#define AT91SAM9261_ID_TC0	17	/* Timer Counter 0 */
+#define AT91SAM9261_ID_TC1	18	/* Timer Counter 1 */
+#define AT91SAM9261_ID_TC2	19	/* Timer Counter 2 */
+#define AT91SAM9261_ID_UHP	20	/* USB Host port */
+#define AT91SAM9261_ID_LCDC	21	/* LDC Controller */
+#define AT91SAM9261_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9261_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
+#define AT91SAM9261_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9261_BASE_TCB0		0xfffa0000
+#define AT91SAM9261_BASE_TC0		0xfffa0000
+#define AT91SAM9261_BASE_TC1		0xfffa0040
+#define AT91SAM9261_BASE_TC2		0xfffa0080
+#define AT91SAM9261_BASE_UDP		0xfffa4000
+#define AT91SAM9261_BASE_MCI		0xfffa8000
+#define AT91SAM9261_BASE_TWI		0xfffac000
+#define AT91SAM9261_BASE_US0		0xfffb0000
+#define AT91SAM9261_BASE_US1		0xfffb4000
+#define AT91SAM9261_BASE_US2		0xfffb8000
+#define AT91SAM9261_BASE_SSC0		0xfffbc000
+#define AT91SAM9261_BASE_SSC1		0xfffc0000
+#define AT91SAM9261_BASE_SSC2		0xfffc4000
+#define AT91SAM9261_BASE_SPI0		0xfffc8000
+#define AT91SAM9261_BASE_SPI1		0xfffcc000
+#define AT91_BASE_SYS			0xffffea00
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9261_BASE_US0
+#define AT91_USART1	AT91SAM9261_BASE_US1
+#define AT91_USART2	AT91SAM9261_BASE_US2
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9261_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define AT91SAM9261_SRAM_SIZE	0x00028000	/* Internal SRAM size (160Kb) */
+
+#define AT91SAM9261_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9261_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
+
+#define AT91SAM9261_UHP_BASE	0x00500000	/* USB Host controller */
+#define AT91SAM9261_LCDC_BASE	0x00600000	/* LDC controller */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
new file mode 100644
index 0000000..db62b1f1
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_MATRIX_H
+#define AT91SAM9261_MATRIX_H
+
+#define AT91_MATRIX_MCFG	(AT91_MATRIX + 0x00)	/* Master Configuration Register */
+#define		AT91_MATRIX_RCB0	(1 << 0)		/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1	(1 << 1)		/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x04)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x08)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x0C)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x10)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x14)	/* Slave Configuration Register 4 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
+
+#define AT91_MATRIX_TCR		(AT91_MATRIX + 0x24)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_16		(5 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define			AT91_MATRIX_ITCM_64		(7 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_16		(5 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+#define			AT91_MATRIX_DTCM_64		(7 << 4)
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x30)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
+#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
+#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+
+#define AT91_MATRIX_USBPUCR	(AT91_MATRIX + 0x34)	/* USB Pad Pull-Up Control Register */
+#define		AT91_MATRIX_USBPUCR_PUON	(1 << 30)	/* USB Device PAD Pull-up Enable */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
new file mode 100644
index 0000000..2091f1e
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9263.h
+ *
+ * (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_H
+#define AT91SAM9263_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91SAM9263_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9263_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9263_ID_PIOCDE	4	/* Parallel IO Controller C, D and E */
+#define AT91SAM9263_ID_US0	7	/* USART 0 */
+#define AT91SAM9263_ID_US1	8	/* USART 1 */
+#define AT91SAM9263_ID_US2	9	/* USART 2 */
+#define AT91SAM9263_ID_MCI0	10	/* Multimedia Card Interface 0 */
+#define AT91SAM9263_ID_MCI1	11	/* Multimedia Card Interface 1 */
+#define AT91SAM9263_ID_CAN	12	/* CAN */
+#define AT91SAM9263_ID_TWI	13	/* Two-Wire Interface */
+#define AT91SAM9263_ID_SPI0	14	/* Serial Peripheral Interface 0 */
+#define AT91SAM9263_ID_SPI1	15	/* Serial Peripheral Interface 1 */
+#define AT91SAM9263_ID_SSC0	16	/* Serial Synchronous Controller 0 */
+#define AT91SAM9263_ID_SSC1	17	/* Serial Synchronous Controller 1 */
+#define AT91SAM9263_ID_AC97C	18	/* AC97 Controller */
+#define AT91SAM9263_ID_TCB	19	/* Timer Counter 0, 1 and 2 */
+#define AT91SAM9263_ID_PWMC	20	/* Pulse Width Modulation Controller */
+#define AT91SAM9263_ID_EMAC	21	/* Ethernet */
+#define AT91SAM9263_ID_2DGE	23	/* 2D Graphic Engine */
+#define AT91SAM9263_ID_UDP	24	/* USB Device Port */
+#define AT91SAM9263_ID_ISI	25	/* Image Sensor Interface */
+#define AT91SAM9263_ID_LCDC	26	/* LCD Controller */
+#define AT91SAM9263_ID_DMA	27	/* DMA Controller */
+#define AT91SAM9263_ID_UHP	29	/* USB Host port */
+#define AT91SAM9263_ID_IRQ0	30	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9263_ID_IRQ1	31	/* Advanced Interrupt Controller (IRQ1) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9263_BASE_UDP		0xfff78000
+#define AT91SAM9263_BASE_TCB0		0xfff7c000
+#define AT91SAM9263_BASE_TC0		0xfff7c000
+#define AT91SAM9263_BASE_TC1		0xfff7c040
+#define AT91SAM9263_BASE_TC2		0xfff7c080
+#define AT91SAM9263_BASE_MCI0		0xfff80000
+#define AT91SAM9263_BASE_MCI1		0xfff84000
+#define AT91SAM9263_BASE_TWI		0xfff88000
+#define AT91SAM9263_BASE_US0		0xfff8c000
+#define AT91SAM9263_BASE_US1		0xfff90000
+#define AT91SAM9263_BASE_US2		0xfff94000
+#define AT91SAM9263_BASE_SSC0		0xfff98000
+#define AT91SAM9263_BASE_SSC1		0xfff9c000
+#define AT91SAM9263_BASE_AC97C		0xfffa0000
+#define AT91SAM9263_BASE_SPI0		0xfffa4000
+#define AT91SAM9263_BASE_SPI1		0xfffa8000
+#define AT91SAM9263_BASE_CAN		0xfffac000
+#define AT91SAM9263_BASE_PWMC		0xfffb8000
+#define AT91SAM9263_BASE_EMAC		0xfffbc000
+#define AT91SAM9263_BASE_ISI		0xfffc4000
+#define AT91SAM9263_BASE_2DGE		0xfffc8000
+#define AT91_BASE_SYS			0xffffe000
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC0	(0xffffe000 - AT91_BASE_SYS)
+#define AT91_SDRAMC0	(0xffffe200 - AT91_BASE_SYS)
+#define AT91_SMC0	(0xffffe400 - AT91_BASE_SYS)
+#define AT91_ECC1	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_SDRAMC1	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_SMC1	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffed10 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE	(0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT0	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_RTT1	(0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9263_BASE_US0
+#define AT91_USART1	AT91SAM9263_BASE_US1
+#define AT91_USART2	AT91SAM9263_BASE_US2
+
+#define AT91_SMC	AT91_SMC0
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9263_SRAM0_BASE	0x00300000	/* Internal SRAM 0 base address */
+#define AT91SAM9263_SRAM0_SIZE	(80 * SZ_1K)	/* Internal SRAM 0 size (80Kb) */
+
+#define AT91SAM9263_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9263_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
+
+#define AT91SAM9263_SRAM1_BASE	0x00500000	/* Internal SRAM 1 base address */
+#define AT91SAM9263_SRAM1_SIZE	SZ_16K		/* Internal SRAM 1 size (16Kb) */
+
+#define AT91SAM9263_LCDC_BASE	0x00700000	/* LCD Controller */
+#define AT91SAM9263_DMAC_BASE	0x00800000	/* DMA Controller */
+#define AT91SAM9263_UHP_BASE	0x00a00000	/* USB Host controller */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
new file mode 100644
index 0000000..9b3efd3
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
@@ -0,0 +1,129 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
+ *
+ *  Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_MATRIX_H
+#define AT91SAM9263_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
+#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
+#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+#define		AT91_MATRIX_RCB6		(1 << 6)
+#define		AT91_MATRIX_RCB7		(1 << 7)
+#define		AT91_MATRIX_RCB8		(1 << 8)
+
+#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x114)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_16		(5 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_16		(5 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+
+#define AT91_MATRIX_EBI0CSA	(AT91_MATRIX + 0x120)	/* EBI0 Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI0_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI0_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI0_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI0_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI0_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI0_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_EBI0_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_EBI0_CS4A_SMC_CF1		(1 << 4)
+#define		AT91_MATRIX_EBI0_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_EBI0_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_EBI0_CS5A_SMC_CF2		(1 << 5)
+#define		AT91_MATRIX_EBI0_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_EBI0_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI0_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI0_VDDIOMSEL_3_3V		(1 << 16)
+
+#define AT91_MATRIX_EBI1CSA	(AT91_MATRIX + 0x124)	/* EBI1 Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI1_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI1_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI1_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI1_CS2A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI1_CS2A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI1_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_EBI1_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI1_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI1_VDDIOMSEL_3_3V		(1 << 16)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
new file mode 100644
index 0000000..1921181
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
@@ -0,0 +1,83 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
+ *
+ * SDRAM Controllers (SDRAMC) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9_SDRAMC_H
+#define AT91SAM9_SDRAMC_H
+
+/* SDRAM Controller (SDRAMC) registers */
+#define AT91_SDRAMC_MR		(AT91_SDRAMC + 0x00)	/* SDRAM Controller Mode Register */
+#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
+#define			AT91_SDRAMC_MODE_NORMAL		0
+#define			AT91_SDRAMC_MODE_NOP		1
+#define			AT91_SDRAMC_MODE_PRECHARGE	2
+#define			AT91_SDRAMC_MODE_LMR		3
+#define			AT91_SDRAMC_MODE_REFRESH	4
+#define			AT91_SDRAMC_MODE_EXT_LMR	5
+#define			AT91_SDRAMC_MODE_DEEP		6
+
+#define AT91_SDRAMC_TR		(AT91_SDRAMC + 0x04)	/* SDRAM Controller Refresh Timer Register */
+#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
+
+#define AT91_SDRAMC_CR		(AT91_SDRAMC + 0x08)	/* SDRAM Controller Configuration Register */
+#define		AT91_SDRAMC_NC		(3 << 0)		/* Number of Column Bits */
+#define			AT91_SDRAMC_NC_8	(0 << 0)
+#define			AT91_SDRAMC_NC_9	(1 << 0)
+#define			AT91_SDRAMC_NC_10	(2 << 0)
+#define			AT91_SDRAMC_NC_11	(3 << 0)
+#define		AT91_SDRAMC_NR		(3 << 2)		/* Number of Row Bits */
+#define			AT91_SDRAMC_NR_11	(0 << 2)
+#define			AT91_SDRAMC_NR_12	(1 << 2)
+#define			AT91_SDRAMC_NR_13	(2 << 2)
+#define		AT91_SDRAMC_NB		(1 << 4)		/* Number of Banks */
+#define			AT91_SDRAMC_NB_2	(0 << 4)
+#define			AT91_SDRAMC_NB_4	(1 << 4)
+#define		AT91_SDRAMC_CAS		(3 << 5)		/* CAS Latency */
+#define			AT91_SDRAMC_CAS_1	(1 << 5)
+#define			AT91_SDRAMC_CAS_2	(2 << 5)
+#define			AT91_SDRAMC_CAS_3	(3 << 5)
+#define		AT91_SDRAMC_DBW		(1 << 7)		/* Data Bus Width */
+#define			AT91_SDRAMC_DBW_32	(0 << 7)
+#define			AT91_SDRAMC_DBW_16	(1 << 7)
+#define		AT91_SDRAMC_TWR		(0xf <<  8)		/* Write Recovery Delay */
+#define		AT91_SDRAMC_TRC		(0xf << 12)		/* Row Cycle Delay */
+#define		AT91_SDRAMC_TRP		(0xf << 16)		/* Row Precharge Delay */
+#define		AT91_SDRAMC_TRCD	(0xf << 20)		/* Row to Column Delay */
+#define		AT91_SDRAMC_TRAS	(0xf << 24)		/* Active to Precharge Delay */
+#define		AT91_SDRAMC_TXSR	(0xf << 28)		/* Exit Self Refresh to Active Delay */
+
+#define AT91_SDRAMC_LPR		(AT91_SDRAMC + 0x10)	/* SDRAM Controller Low Power Register */
+#define		AT91_SDRAMC_LPCB		(3 << 0)	/* Low-power Configurations */
+#define			AT91_SDRAMC_LPCB_DISABLE		0
+#define			AT91_SDRAMC_LPCB_SELF_REFRESH		1
+#define			AT91_SDRAMC_LPCB_POWER_DOWN		2
+#define			AT91_SDRAMC_LPCB_DEEP_POWER_DOWN	3
+#define		AT91_SDRAMC_PASR		(7 << 4)	/* Partial Array Self Refresh */
+#define		AT91_SDRAMC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
+#define		AT91_SDRAMC_DS			(3 << 10)	/* Drive Strength */
+#define		AT91_SDRAMC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
+#define			AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
+#define			AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
+#define			AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
+
+#define AT91_SDRAMC_IER		(AT91_SDRAMC + 0x14)	/* SDRAM Controller Interrupt Enable Register */
+#define AT91_SDRAMC_IDR		(AT91_SDRAMC + 0x18)	/* SDRAM Controller Interrupt Disable Register */
+#define AT91_SDRAMC_IMR		(AT91_SDRAMC + 0x1C)	/* SDRAM Controller Interrupt Mask Register */
+#define AT91_SDRAMC_ISR		(AT91_SDRAMC + 0x20)	/* SDRAM Controller Interrupt Status Register */
+#define		AT91_SDRAMC_RES		(1 << 0)		/* Refresh Error Status */
+
+#define AT91_SDRAMC_MDR		(AT91_SDRAMC + 0x24)	/* SDRAM Memory Device Register */
+#define		AT91_SDRAMC_MD		(3 << 0)		/* Memory Device Type */
+#define			AT91_SDRAMC_MD_SDRAM		0
+#define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
new file mode 100644
index 0000000..ec6ad13
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9_smc.h
+ *
+ * Static Memory Controllers (SMC) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9_SMC_H
+#define AT91SAM9_SMC_H
+
+#define AT91_SMC_SETUP(n)	(AT91_SMC + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
+#define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
+#define			AT91_SMC_NWESETUP_(x)	((x) << 0)
+#define		AT91_SMC_NCS_WRSETUP	(0x3f << 8)			/* NCS Setup Length in Write Access */
+#define			AT91_SMC_NCS_WRSETUP_(x)	((x) << 8)
+#define		AT91_SMC_NRDSETUP	(0x3f << 16)			/* NRD Setup Length */
+#define			AT91_SMC_NRDSETUP_(x)	((x) << 16)
+#define		AT91_SMC_NCS_RDSETUP	(0x3f << 24)			/* NCS Setup Length in Read Access */
+#define			AT91_SMC_NCS_RDSETUP_(x)	((x) << 24)
+
+#define AT91_SMC_PULSE(n)	(AT91_SMC + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
+#define		AT91_SMC_NWEPULSE	(0x7f <<  0)			/* NWE Pulse Length */
+#define			AT91_SMC_NWEPULSE_(x)	((x) << 0)
+#define		AT91_SMC_NCS_WRPULSE	(0x7f <<  8)			/* NCS Pulse Length in Write Access */
+#define			AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
+#define		AT91_SMC_NRDPULSE	(0x7f << 16)			/* NRD Pulse Length */
+#define			AT91_SMC_NRDPULSE_(x)	((x) << 16)
+#define		AT91_SMC_NCS_RDPULSE	(0x7f << 24)			/* NCS Pulse Length in Read Access */
+#define			AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
+
+#define AT91_SMC_CYCLE(n)	(AT91_SMC + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
+#define		AT91_SMC_NWECYCLE	(0x1ff << 0 )			/* Total Write Cycle Length */
+#define			AT91_SMC_NWECYCLE_(x)	((x) << 0)
+#define		AT91_SMC_NRDCYCLE	(0x1ff << 16)			/* Total Read Cycle Length */
+#define			AT91_SMC_NRDCYCLE_(x)	((x) << 16)
+
+#define AT91_SMC_MODE(n)	(AT91_SMC + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
+#define		AT91_SMC_READMODE	(1 <<  0)			/* Read Mode */
+#define		AT91_SMC_WRITEMODE	(1 <<  1)			/* Write Mode */
+#define		AT91_SMC_EXNWMODE	(3 <<  4)			/* NWAIT Mode */
+#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 4)
+#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 4)
+#define			AT91_SMC_EXNWMODE_READY		(3 << 4)
+#define		AT91_SMC_BAT		(1 <<  8)			/* Byte Access Type */
+#define			AT91_SMC_BAT_SELECT		(0 << 8)
+#define			AT91_SMC_BAT_WRITE		(1 << 8)
+#define		AT91_SMC_DBW		(3 << 12)			/* Data Bus Width */
+#define			AT91_SMC_DBW_8			(0 << 12)
+#define			AT91_SMC_DBW_16			(1 << 12)
+#define			AT91_SMC_DBW_32			(2 << 12)
+#define		AT91_SMC_TDF		(0xf << 16)			/* Data Float Time. */
+#define			AT91_SMC_TDF_(x)		((x) << 16)
+#define		AT91_SMC_TDFMODE	(1 << 20)			/* TDF Optimization - Enabled */
+#define		AT91_SMC_PMEN		(1 << 24)			/* Page Mode Enabled */
+#define		AT91_SMC_PS		(3 << 28)			/* Page Size */
+#define			AT91_SMC_PS_4			(0 << 28)
+#define			AT91_SMC_PS_8			(1 << 28)
+#define			AT91_SMC_PS_16			(2 << 28)
+#define			AT91_SMC_PS_32			(3 << 28)
+
+#if defined(AT91_SMC1)		/* The AT91SAM9263 has 2 Static Memory contollers */
+#define AT91_SMC1_SETUP(n)	(AT91_SMC1 + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
+#define AT91_SMC1_PULSE(n)	(AT91_SMC1 + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
+#define AT91_SMC1_CYCLE(n)	(AT91_SMC1 + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
+#define AT91_SMC1_MODE(n)	(AT91_SMC1 + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
+#endif
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
new file mode 100644
index 0000000..fc2de6c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9260.h
+ *
+ *  Copyright (C) 2007 Atmel Corporation
+ *
+ * Common definitions.
+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef AT91SAM9RL_H
+#define AT91SAM9RL_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Controller */
+#define AT91SAM9RL_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9RL_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9RL_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91SAM9RL_ID_PIOD	5	/* Parallel IO Controller D */
+#define AT91SAM9RL_ID_US0	6	/* USART 0 */
+#define AT91SAM9RL_ID_US1	7	/* USART 1 */
+#define AT91SAM9RL_ID_US2	8	/* USART 2 */
+#define AT91SAM9RL_ID_US3	9	/* USART 3 */
+#define AT91SAM9RL_ID_MCI	10	/* Multimedia Card Interface */
+#define AT91SAM9RL_ID_TWI0	11	/* TWI 0 */
+#define AT91SAM9RL_ID_TWI1	12	/* TWI 1 */
+#define AT91SAM9RL_ID_SPI	13	/* Serial Peripheral Interface */
+#define AT91SAM9RL_ID_SSC0	14	/* Serial Synchronous Controller 0 */
+#define AT91SAM9RL_ID_SSC1	15	/* Serial Synchronous Controller 1 */
+#define AT91SAM9RL_ID_TC0	16	/* Timer Counter 0 */
+#define AT91SAM9RL_ID_TC1	17	/* Timer Counter 1 */
+#define AT91SAM9RL_ID_TC2	18	/* Timer Counter 2 */
+#define AT91SAM9RL_ID_PWMC	19	/* Pulse Width Modulation Controller */
+#define AT91SAM9RL_ID_TSC	20	/* Touch Screen Controller */
+#define AT91SAM9RL_ID_DMA	21	/* DMA Controller */
+#define AT91SAM9RL_ID_UDPHS	22	/* USB Device HS */
+#define AT91SAM9RL_ID_LCDC	23	/* LCD Controller */
+#define AT91SAM9RL_ID_AC97C	24	/* AC97 Controller */
+#define AT91SAM9RL_ID_IRQ0	31	/* Advanced Interrupt Controller (IRQ0) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9RL_BASE_TCB0	0xfffa0000
+#define AT91SAM9RL_BASE_TC0	0xfffa0000
+#define AT91SAM9RL_BASE_TC1	0xfffa0040
+#define AT91SAM9RL_BASE_TC2	0xfffa0080
+#define AT91SAM9RL_BASE_MCI	0xfffa4000
+#define AT91SAM9RL_BASE_TWI0	0xfffa8000
+#define AT91SAM9RL_BASE_TWI1	0xfffac000
+#define AT91SAM9RL_BASE_US0	0xfffb0000
+#define AT91SAM9RL_BASE_US1	0xfffb4000
+#define AT91SAM9RL_BASE_US2	0xfffb8000
+#define AT91SAM9RL_BASE_US3	0xfffbc000
+#define AT91SAM9RL_BASE_SSC0	0xfffc0000
+#define AT91SAM9RL_BASE_SSC1	0xfffc4000
+#define AT91SAM9RL_BASE_PWMC	0xfffc8000
+#define AT91SAM9RL_BASE_SPI	0xfffcc000
+#define AT91SAM9RL_BASE_TSC	0xfffd0000
+#define AT91SAM9RL_BASE_UDPHS	0xfffd4000
+#define AT91SAM9RL_BASE_AC97C	0xfffd8000
+#define AT91_BASE_SYS		0xffffc000
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_DMA	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_SCKCR	(0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
+#define AT91_RTC	(0xfffffe00 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9RL_BASE_US0
+#define AT91_USART1	AT91SAM9RL_BASE_US1
+#define AT91_USART2	AT91SAM9RL_BASE_US2
+#define AT91_USART3	AT91SAM9RL_BASE_US3
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9RL_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define AT91SAM9RL_SRAM_SIZE	SZ_16K		/* Internal SRAM size (16Kb) */
+
+#define AT91SAM9RL_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9RL_ROM_SIZE	(2 * SZ_16K)	/* Internal ROM size (32Kb) */
+
+#define AT91SAM9RL_LCDC_BASE	0x00500000	/* LCD Controller */
+#define AT91SAM9RL_UDPHS_FIFO	0x00600000	/* USB Device HS controller */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
new file mode 100644
index 0000000..5f91490
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
+ *
+ *  Copyright (C) 2007 Atmel Corporation
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef AT91SAM9RL_MATRIX_H
+#define AT91SAM9RL_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+
+#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x114)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_16		(5 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_16		(5 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI0 Chip Select Assignment Register */
+#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
+#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
+#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
+#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h
new file mode 100644
index 0000000..d34cdb8
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91x40.h
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91x40.h
+ *
+ * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91X40_H
+#define AT91X40_H
+
+/*
+ *	IRQ list.
+ */
+#define AT91_ID_FIQ		0	/* FIQ */
+#define AT91_ID_SYS		1	/* System Peripheral */
+#define AT91X40_ID_USART0	2	/* USART port 0 */
+#define AT91X40_ID_USART1	3	/* USART port 1 */
+#define AT91X40_ID_TC0		4	/* Timer/Counter 0 */
+#define AT91X40_ID_TC1		5	/* Timer/Counter 1*/
+#define AT91X40_ID_TC2		6	/* Timer/Counter 2*/
+#define AT91X40_ID_WD		7	/* Watchdog? */
+#define AT91X40_ID_PIOA		8	/* Parallel IO Controller A */
+
+#define AT91X40_ID_IRQ0		16	/* External IRQ 0 */
+#define AT91X40_ID_IRQ1		17	/* External IRQ 1 */
+#define AT91X40_ID_IRQ2		18	/* External IRQ 2 */
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_BASE_SYS	0xffc00000
+
+#define AT91_EBI	(0xffe00000 - AT91_BASE_SYS)	/* External Bus Interface */
+#define AT91_SF		(0xfff00000 - AT91_BASE_SYS)	/* Special Function */
+#define AT91_USART1	(0xfffcc000 - AT91_BASE_SYS)	/* USART 1 */
+#define AT91_USART0	(0xfffd0000 - AT91_BASE_SYS)	/* USART 0 */
+#define AT91_TC		(0xfffe0000 - AT91_BASE_SYS)	/* Timer Counter */
+#define AT91_PIOA	(0xffff0000 - AT91_BASE_SYS)	/* PIO Controller A */
+#define AT91_PS		(0xffff4000 - AT91_BASE_SYS)	/* Power Save */
+#define AT91_WD		(0xffff8000 - AT91_BASE_SYS)	/* Watchdog Timer */
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)	/* Advanced Interrupt Controller */
+
+/*
+ * The AT91x40 series doesn't have a debug unit like the other AT91 parts.
+ * But it does have a chip identify register and extension ID, so define at
+ * least these here.
+ */
+#define AT91_DBGU_CIDR	(AT91_SF + 0)	/* CIDR in PS segment */
+#define AT91_DBGU_EXID	(AT91_SF + 4)	/* EXID in PS segment */
+
+#endif /* AT91X40_H */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
new file mode 100644
index 0000000..acd60f2
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -0,0 +1,172 @@
+/*
+ * arch/arm/mach-at91/include/mach/board.h
+ *
+ *  Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * These are data structures found in platform_device.dev.platform_data,
+ * and describing board-specific data needed by drivers.  For example,
+ * which pin is used for a given GPIO role.
+ *
+ * In 2.6, drivers should strongly avoid board-specific knowledge so
+ * that supporting new boards normally won't require driver patches.
+ * Most board-specific knowledge should be in arch/.../board-*.c files.
+ */
+
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+#include <linux/mtd/partitions.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/atmel_usba_udc.h>
+
+ /* USB Device */
+struct at91_udc_data {
+	u8	vbus_pin;		/* high == host powering us */
+	u8	pullup_pin;		/* active == D+ pulled up */
+	u8	pullup_active_low;	/* true == pullup_pin is active low */
+};
+extern void __init at91_add_device_udc(struct at91_udc_data *data);
+
+ /* USB High Speed Device */
+extern void __init at91_add_device_usba(struct usba_platform_data *data);
+
+ /* Compact Flash */
+struct at91_cf_data {
+	u8	irq_pin;		/* I/O IRQ */
+	u8	det_pin;		/* Card detect */
+	u8	vcc_pin;		/* power switching */
+	u8	rst_pin;		/* card reset */
+	u8	chipselect;		/* EBI Chip Select number */
+};
+extern void __init at91_add_device_cf(struct at91_cf_data *data);
+
+ /* MMC / SD */
+struct at91_mmc_data {
+	u8		det_pin;	/* card detect IRQ */
+	unsigned	slot_b:1;	/* uses Slot B */
+	unsigned	wire4:1;	/* (SD) supports DAT0..DAT3 */
+	u8		wp_pin;		/* (SD) writeprotect detect */
+	u8		vcc_pin;	/* power switching (high == on) */
+};
+extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
+
+ /* Ethernet (EMAC & MACB) */
+struct at91_eth_data {
+	u32		phy_mask;
+	u8		phy_irq_pin;	/* PHY IRQ */
+	u8		is_rmii;	/* using RMII interface? */
+};
+extern void __init at91_add_device_eth(struct at91_eth_data *data);
+
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9)
+#define eth_platform_data	at91_eth_data
+#endif
+
+ /* USB Host */
+struct at91_usbh_data {
+	u8		ports;		/* number of ports on root hub */
+	u8		vbus_pin[];	/* port power-control pin */
+};
+extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
+
+ /* NAND / SmartMedia */
+struct atmel_nand_data {
+	u8		enable_pin;	/* chip enable */
+	u8		det_pin;	/* card detect */
+	u8		rdy_pin;	/* ready/busy */
+	u8		ale;		/* address line number connected to ALE */
+	u8		cle;		/* address line number connected to CLE */
+	u8		bus_width_16;	/* buswidth is 16 bit */
+	struct mtd_partition* (*partition_info)(int, int*);
+};
+extern void __init at91_add_device_nand(struct atmel_nand_data *data);
+
+ /* I2C*/
+extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
+
+ /* SPI */
+extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
+
+ /* Serial */
+#define ATMEL_UART_CTS	0x01
+#define ATMEL_UART_RTS	0x02
+#define ATMEL_UART_DSR	0x04
+#define ATMEL_UART_DTR	0x08
+#define ATMEL_UART_DCD	0x10
+#define ATMEL_UART_RI	0x20
+
+extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
+extern void __init at91_set_serial_console(unsigned portnr);
+
+struct at91_uart_config {
+	unsigned short	console_tty;	/* tty number of serial console */
+	unsigned short	nr_tty;		/* number of serial tty's */
+	short		tty_map[];	/* map UART to tty number */
+};
+extern struct platform_device *atmel_default_console_device;
+extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
+
+struct atmel_uart_data {
+	short		use_dma_tx;	/* use transmit DMA? */
+	short		use_dma_rx;	/* use receive DMA? */
+	void __iomem	*regs;		/* virtual base address, if any */
+};
+extern void __init at91_add_device_serial(void);
+
+/*
+ * SSC -- accessed through ssc_request(id).  Drivers don't bind to SSC
+ * platform devices.  Their SSC ID is part of their configuration data,
+ * along with information about which SSC signals they should use.
+ */
+#define ATMEL_SSC_TK	0x01
+#define ATMEL_SSC_TF	0x02
+#define ATMEL_SSC_TD	0x04
+#define ATMEL_SSC_TX	(ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
+
+#define ATMEL_SSC_RK	0x10
+#define ATMEL_SSC_RF	0x20
+#define ATMEL_SSC_RD	0x40
+#define ATMEL_SSC_RX	(ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
+
+extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
+
+ /* LCD Controller */
+struct atmel_lcdfb_info;
+extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
+
+ /* AC97 */
+struct atmel_ac97_data {
+	u8		reset_pin;	/* reset */
+};
+extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
+
+ /* ISI */
+extern void __init at91_add_device_isi(void);
+
+ /* LEDs */
+extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
+extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
+
+/* FIXME: this needs a better location, but gets stuff building again */
+extern int at91_suspend_entering_slow_clock(void);
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
new file mode 100644
index 0000000..dbfd9f7
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -0,0 +1,103 @@
+/*
+ * arch/arm/mach-at91/include/mach/cpu.h
+ *
+ *  Copyright (C) 2006 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_CPU_H
+#define __ASM_ARCH_CPU_H
+
+#include <mach/hardware.h>
+#include <mach/at91_dbgu.h>
+
+
+#define ARCH_ID_AT91RM9200	0x09290780
+#define ARCH_ID_AT91SAM9260	0x019803a0
+#define ARCH_ID_AT91SAM9261	0x019703a0
+#define ARCH_ID_AT91SAM9263	0x019607a0
+#define ARCH_ID_AT91SAM9G20	0x019905a0
+#define ARCH_ID_AT91SAM9RL64	0x019b03a0
+#define ARCH_ID_AT91CAP9	0x039A03A0
+
+#define ARCH_ID_AT91SAM9XE128	0x329973a0
+#define ARCH_ID_AT91SAM9XE256	0x329a93a0
+#define ARCH_ID_AT91SAM9XE512	0x329aa3a0
+
+#define ARCH_ID_AT91M40800	0x14080044
+#define ARCH_ID_AT91R40807	0x44080746
+#define ARCH_ID_AT91M40807	0x14080745
+#define ARCH_ID_AT91R40008	0x44000840
+
+static inline unsigned long at91_cpu_identify(void)
+{
+	return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
+}
+
+
+#define ARCH_FAMILY_AT91X92	0x09200000
+#define ARCH_FAMILY_AT91SAM9	0x01900000
+#define ARCH_FAMILY_AT91SAM9XE	0x02900000
+
+static inline unsigned long at91_arch_identify(void)
+{
+	return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
+}
+
+
+#ifdef CONFIG_ARCH_AT91RM9200
+#define cpu_is_at91rm9200()	(at91_cpu_identify() == ARCH_ID_AT91RM9200)
+#else
+#define cpu_is_at91rm9200()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9260
+#define cpu_is_at91sam9xe()	(at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE)
+#define cpu_is_at91sam9260()	((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe())
+#else
+#define cpu_is_at91sam9xe()	(0)
+#define cpu_is_at91sam9260()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9G20
+#define cpu_is_at91sam9g20()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G20)
+#else
+#define cpu_is_at91sam9g20()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9261
+#define cpu_is_at91sam9261()	(at91_cpu_identify() == ARCH_ID_AT91SAM9261)
+#else
+#define cpu_is_at91sam9261()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9263
+#define cpu_is_at91sam9263()	(at91_cpu_identify() == ARCH_ID_AT91SAM9263)
+#else
+#define cpu_is_at91sam9263()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9RL
+#define cpu_is_at91sam9rl()	(at91_cpu_identify() == ARCH_ID_AT91SAM9RL64)
+#else
+#define cpu_is_at91sam9rl()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91CAP9
+#define cpu_is_at91cap9()	(at91_cpu_identify() == ARCH_ID_AT91CAP9)
+#else
+#define cpu_is_at91cap9()	(0)
+#endif
+
+/*
+ * Since this is ARM, we will never run on any AVR32 CPU. But these
+ * definitions may reduce clutter in common drivers.
+ */
+#define cpu_is_at32ap7000()	(0)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
new file mode 100644
index 0000000..29052ba
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-at91/include/mach/debug-macro.S
+ *
+ *  Copyright (C) 2003-2005 SAN People
+ *
+ * Debugging macro include header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <mach/hardware.h>
+#include <mach/at91_dbgu.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1						@ MMU enabled?
+	ldreq	\rx, =(AT91_BASE_SYS + AT91_DBGU)		@ System peripherals (phys address)
+	ldrne	\rx, =(AT91_VA_BASE_SYS	+ AT91_DBGU)		@ System peripherals (virt address)
+	.endm
+
+	.macro	senduart,rd,rx
+	strb	\rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)]	@ Write to Transmitter Holding Register
+	.endm
+
+	.macro	waituart,rd,rx
+1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)]		@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXRDY				@ DBGU_TXRDY = 1 when ready to transmit
+	beq	1001b
+	.endm
+
+	.macro	busyuart,rd,rx
+1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)]		@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXEMPTY				@ DBGU_TXEMPTY = 1 when transmission complete
+	beq	1001b
+	.endm
+
diff --git a/arch/arm/mach-at91/include/mach/dma.h b/arch/arm/mach-at91/include/mach/dma.h
new file mode 100644
index 0000000..e4f90c1
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/dma.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-at91/include/mach/dma.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-at91/include/mach/entry-macro.S b/arch/arm/mach-at91/include/mach/entry-macro.S
new file mode 100644
index 0000000..7ab68f9
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-at91/include/mach/entry-macro.S
+ *
+ *  Copyright (C) 2003-2005 SAN People
+ *
+ * Low-level IRQ helper macros for AT91RM9200 platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <mach/at91_aic.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =(AT91_VA_BASE_SYS + AT91_AIC)		@ base virtual address of AIC peripheral
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)]	@ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
+	ldr	\irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)]	@ read interrupt source number
+	teq	\irqstat, #0					@ ISR is 0 when no current interrupt, or spurious interrupt
+	streq	\tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)]	@ not going to be handled further, then ACK it now.
+	.endm
+
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
new file mode 100644
index 0000000..76d76e2
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -0,0 +1,252 @@
+/*
+ * arch/arm/mach-at91/include/mach/gpio.h
+ *
+ *  Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
+#define __ASM_ARCH_AT91RM9200_GPIO_H
+
+#include <asm/irq.h>
+
+#define PIN_BASE		NR_AIC_IRQS
+
+#define MAX_GPIO_BANKS		5
+
+/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
+
+#define	AT91_PIN_PA0	(PIN_BASE + 0x00 + 0)
+#define	AT91_PIN_PA1	(PIN_BASE + 0x00 + 1)
+#define	AT91_PIN_PA2	(PIN_BASE + 0x00 + 2)
+#define	AT91_PIN_PA3	(PIN_BASE + 0x00 + 3)
+#define	AT91_PIN_PA4	(PIN_BASE + 0x00 + 4)
+#define	AT91_PIN_PA5	(PIN_BASE + 0x00 + 5)
+#define	AT91_PIN_PA6	(PIN_BASE + 0x00 + 6)
+#define	AT91_PIN_PA7	(PIN_BASE + 0x00 + 7)
+#define	AT91_PIN_PA8	(PIN_BASE + 0x00 + 8)
+#define	AT91_PIN_PA9	(PIN_BASE + 0x00 + 9)
+#define	AT91_PIN_PA10	(PIN_BASE + 0x00 + 10)
+#define	AT91_PIN_PA11	(PIN_BASE + 0x00 + 11)
+#define	AT91_PIN_PA12	(PIN_BASE + 0x00 + 12)
+#define	AT91_PIN_PA13	(PIN_BASE + 0x00 + 13)
+#define	AT91_PIN_PA14	(PIN_BASE + 0x00 + 14)
+#define	AT91_PIN_PA15	(PIN_BASE + 0x00 + 15)
+#define	AT91_PIN_PA16	(PIN_BASE + 0x00 + 16)
+#define	AT91_PIN_PA17	(PIN_BASE + 0x00 + 17)
+#define	AT91_PIN_PA18	(PIN_BASE + 0x00 + 18)
+#define	AT91_PIN_PA19	(PIN_BASE + 0x00 + 19)
+#define	AT91_PIN_PA20	(PIN_BASE + 0x00 + 20)
+#define	AT91_PIN_PA21	(PIN_BASE + 0x00 + 21)
+#define	AT91_PIN_PA22	(PIN_BASE + 0x00 + 22)
+#define	AT91_PIN_PA23	(PIN_BASE + 0x00 + 23)
+#define	AT91_PIN_PA24	(PIN_BASE + 0x00 + 24)
+#define	AT91_PIN_PA25	(PIN_BASE + 0x00 + 25)
+#define	AT91_PIN_PA26	(PIN_BASE + 0x00 + 26)
+#define	AT91_PIN_PA27	(PIN_BASE + 0x00 + 27)
+#define	AT91_PIN_PA28	(PIN_BASE + 0x00 + 28)
+#define	AT91_PIN_PA29	(PIN_BASE + 0x00 + 29)
+#define	AT91_PIN_PA30	(PIN_BASE + 0x00 + 30)
+#define	AT91_PIN_PA31	(PIN_BASE + 0x00 + 31)
+
+#define	AT91_PIN_PB0	(PIN_BASE + 0x20 + 0)
+#define	AT91_PIN_PB1	(PIN_BASE + 0x20 + 1)
+#define	AT91_PIN_PB2	(PIN_BASE + 0x20 + 2)
+#define	AT91_PIN_PB3	(PIN_BASE + 0x20 + 3)
+#define	AT91_PIN_PB4	(PIN_BASE + 0x20 + 4)
+#define	AT91_PIN_PB5	(PIN_BASE + 0x20 + 5)
+#define	AT91_PIN_PB6	(PIN_BASE + 0x20 + 6)
+#define	AT91_PIN_PB7	(PIN_BASE + 0x20 + 7)
+#define	AT91_PIN_PB8	(PIN_BASE + 0x20 + 8)
+#define	AT91_PIN_PB9	(PIN_BASE + 0x20 + 9)
+#define	AT91_PIN_PB10	(PIN_BASE + 0x20 + 10)
+#define	AT91_PIN_PB11	(PIN_BASE + 0x20 + 11)
+#define	AT91_PIN_PB12	(PIN_BASE + 0x20 + 12)
+#define	AT91_PIN_PB13	(PIN_BASE + 0x20 + 13)
+#define	AT91_PIN_PB14	(PIN_BASE + 0x20 + 14)
+#define	AT91_PIN_PB15	(PIN_BASE + 0x20 + 15)
+#define	AT91_PIN_PB16	(PIN_BASE + 0x20 + 16)
+#define	AT91_PIN_PB17	(PIN_BASE + 0x20 + 17)
+#define	AT91_PIN_PB18	(PIN_BASE + 0x20 + 18)
+#define	AT91_PIN_PB19	(PIN_BASE + 0x20 + 19)
+#define	AT91_PIN_PB20	(PIN_BASE + 0x20 + 20)
+#define	AT91_PIN_PB21	(PIN_BASE + 0x20 + 21)
+#define	AT91_PIN_PB22	(PIN_BASE + 0x20 + 22)
+#define	AT91_PIN_PB23	(PIN_BASE + 0x20 + 23)
+#define	AT91_PIN_PB24	(PIN_BASE + 0x20 + 24)
+#define	AT91_PIN_PB25	(PIN_BASE + 0x20 + 25)
+#define	AT91_PIN_PB26	(PIN_BASE + 0x20 + 26)
+#define	AT91_PIN_PB27	(PIN_BASE + 0x20 + 27)
+#define	AT91_PIN_PB28	(PIN_BASE + 0x20 + 28)
+#define	AT91_PIN_PB29	(PIN_BASE + 0x20 + 29)
+#define	AT91_PIN_PB30	(PIN_BASE + 0x20 + 30)
+#define	AT91_PIN_PB31	(PIN_BASE + 0x20 + 31)
+
+#define	AT91_PIN_PC0	(PIN_BASE + 0x40 + 0)
+#define	AT91_PIN_PC1	(PIN_BASE + 0x40 + 1)
+#define	AT91_PIN_PC2	(PIN_BASE + 0x40 + 2)
+#define	AT91_PIN_PC3	(PIN_BASE + 0x40 + 3)
+#define	AT91_PIN_PC4	(PIN_BASE + 0x40 + 4)
+#define	AT91_PIN_PC5	(PIN_BASE + 0x40 + 5)
+#define	AT91_PIN_PC6	(PIN_BASE + 0x40 + 6)
+#define	AT91_PIN_PC7	(PIN_BASE + 0x40 + 7)
+#define	AT91_PIN_PC8	(PIN_BASE + 0x40 + 8)
+#define	AT91_PIN_PC9	(PIN_BASE + 0x40 + 9)
+#define	AT91_PIN_PC10	(PIN_BASE + 0x40 + 10)
+#define	AT91_PIN_PC11	(PIN_BASE + 0x40 + 11)
+#define	AT91_PIN_PC12	(PIN_BASE + 0x40 + 12)
+#define	AT91_PIN_PC13	(PIN_BASE + 0x40 + 13)
+#define	AT91_PIN_PC14	(PIN_BASE + 0x40 + 14)
+#define	AT91_PIN_PC15	(PIN_BASE + 0x40 + 15)
+#define	AT91_PIN_PC16	(PIN_BASE + 0x40 + 16)
+#define	AT91_PIN_PC17	(PIN_BASE + 0x40 + 17)
+#define	AT91_PIN_PC18	(PIN_BASE + 0x40 + 18)
+#define	AT91_PIN_PC19	(PIN_BASE + 0x40 + 19)
+#define	AT91_PIN_PC20	(PIN_BASE + 0x40 + 20)
+#define	AT91_PIN_PC21	(PIN_BASE + 0x40 + 21)
+#define	AT91_PIN_PC22	(PIN_BASE + 0x40 + 22)
+#define	AT91_PIN_PC23	(PIN_BASE + 0x40 + 23)
+#define	AT91_PIN_PC24	(PIN_BASE + 0x40 + 24)
+#define	AT91_PIN_PC25	(PIN_BASE + 0x40 + 25)
+#define	AT91_PIN_PC26	(PIN_BASE + 0x40 + 26)
+#define	AT91_PIN_PC27	(PIN_BASE + 0x40 + 27)
+#define	AT91_PIN_PC28	(PIN_BASE + 0x40 + 28)
+#define	AT91_PIN_PC29	(PIN_BASE + 0x40 + 29)
+#define	AT91_PIN_PC30	(PIN_BASE + 0x40 + 30)
+#define	AT91_PIN_PC31	(PIN_BASE + 0x40 + 31)
+
+#define	AT91_PIN_PD0	(PIN_BASE + 0x60 + 0)
+#define	AT91_PIN_PD1	(PIN_BASE + 0x60 + 1)
+#define	AT91_PIN_PD2	(PIN_BASE + 0x60 + 2)
+#define	AT91_PIN_PD3	(PIN_BASE + 0x60 + 3)
+#define	AT91_PIN_PD4	(PIN_BASE + 0x60 + 4)
+#define	AT91_PIN_PD5	(PIN_BASE + 0x60 + 5)
+#define	AT91_PIN_PD6	(PIN_BASE + 0x60 + 6)
+#define	AT91_PIN_PD7	(PIN_BASE + 0x60 + 7)
+#define	AT91_PIN_PD8	(PIN_BASE + 0x60 + 8)
+#define	AT91_PIN_PD9	(PIN_BASE + 0x60 + 9)
+#define	AT91_PIN_PD10	(PIN_BASE + 0x60 + 10)
+#define	AT91_PIN_PD11	(PIN_BASE + 0x60 + 11)
+#define	AT91_PIN_PD12	(PIN_BASE + 0x60 + 12)
+#define	AT91_PIN_PD13	(PIN_BASE + 0x60 + 13)
+#define	AT91_PIN_PD14	(PIN_BASE + 0x60 + 14)
+#define	AT91_PIN_PD15	(PIN_BASE + 0x60 + 15)
+#define	AT91_PIN_PD16	(PIN_BASE + 0x60 + 16)
+#define	AT91_PIN_PD17	(PIN_BASE + 0x60 + 17)
+#define	AT91_PIN_PD18	(PIN_BASE + 0x60 + 18)
+#define	AT91_PIN_PD19	(PIN_BASE + 0x60 + 19)
+#define	AT91_PIN_PD20	(PIN_BASE + 0x60 + 20)
+#define	AT91_PIN_PD21	(PIN_BASE + 0x60 + 21)
+#define	AT91_PIN_PD22	(PIN_BASE + 0x60 + 22)
+#define	AT91_PIN_PD23	(PIN_BASE + 0x60 + 23)
+#define	AT91_PIN_PD24	(PIN_BASE + 0x60 + 24)
+#define	AT91_PIN_PD25	(PIN_BASE + 0x60 + 25)
+#define	AT91_PIN_PD26	(PIN_BASE + 0x60 + 26)
+#define	AT91_PIN_PD27	(PIN_BASE + 0x60 + 27)
+#define	AT91_PIN_PD28	(PIN_BASE + 0x60 + 28)
+#define	AT91_PIN_PD29	(PIN_BASE + 0x60 + 29)
+#define	AT91_PIN_PD30	(PIN_BASE + 0x60 + 30)
+#define	AT91_PIN_PD31	(PIN_BASE + 0x60 + 31)
+
+#define	AT91_PIN_PE0	(PIN_BASE + 0x80 + 0)
+#define	AT91_PIN_PE1	(PIN_BASE + 0x80 + 1)
+#define	AT91_PIN_PE2	(PIN_BASE + 0x80 + 2)
+#define	AT91_PIN_PE3	(PIN_BASE + 0x80 + 3)
+#define	AT91_PIN_PE4	(PIN_BASE + 0x80 + 4)
+#define	AT91_PIN_PE5	(PIN_BASE + 0x80 + 5)
+#define	AT91_PIN_PE6	(PIN_BASE + 0x80 + 6)
+#define	AT91_PIN_PE7	(PIN_BASE + 0x80 + 7)
+#define	AT91_PIN_PE8	(PIN_BASE + 0x80 + 8)
+#define	AT91_PIN_PE9	(PIN_BASE + 0x80 + 9)
+#define	AT91_PIN_PE10	(PIN_BASE + 0x80 + 10)
+#define	AT91_PIN_PE11	(PIN_BASE + 0x80 + 11)
+#define	AT91_PIN_PE12	(PIN_BASE + 0x80 + 12)
+#define	AT91_PIN_PE13	(PIN_BASE + 0x80 + 13)
+#define	AT91_PIN_PE14	(PIN_BASE + 0x80 + 14)
+#define	AT91_PIN_PE15	(PIN_BASE + 0x80 + 15)
+#define	AT91_PIN_PE16	(PIN_BASE + 0x80 + 16)
+#define	AT91_PIN_PE17	(PIN_BASE + 0x80 + 17)
+#define	AT91_PIN_PE18	(PIN_BASE + 0x80 + 18)
+#define	AT91_PIN_PE19	(PIN_BASE + 0x80 + 19)
+#define	AT91_PIN_PE20	(PIN_BASE + 0x80 + 20)
+#define	AT91_PIN_PE21	(PIN_BASE + 0x80 + 21)
+#define	AT91_PIN_PE22	(PIN_BASE + 0x80 + 22)
+#define	AT91_PIN_PE23	(PIN_BASE + 0x80 + 23)
+#define	AT91_PIN_PE24	(PIN_BASE + 0x80 + 24)
+#define	AT91_PIN_PE25	(PIN_BASE + 0x80 + 25)
+#define	AT91_PIN_PE26	(PIN_BASE + 0x80 + 26)
+#define	AT91_PIN_PE27	(PIN_BASE + 0x80 + 27)
+#define	AT91_PIN_PE28	(PIN_BASE + 0x80 + 28)
+#define	AT91_PIN_PE29	(PIN_BASE + 0x80 + 29)
+#define	AT91_PIN_PE30	(PIN_BASE + 0x80 + 30)
+#define	AT91_PIN_PE31	(PIN_BASE + 0x80 + 31)
+
+#ifndef __ASSEMBLY__
+/* setup setup routines, called from board init or driver probe() */
+extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
+extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
+extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
+
+/* callable at any time */
+extern int at91_set_gpio_value(unsigned pin, int value);
+extern int at91_get_gpio_value(unsigned pin);
+
+/* callable only from core power-management code */
+extern void at91_gpio_suspend(void);
+extern void at91_gpio_resume(void);
+
+/*-------------------------------------------------------------------------*/
+
+/* wrappers for "new style" GPIO calls. the old AT91-specfic ones should
+ * eventually be removed (along with this errno.h inclusion), and the
+ * gpio request/free calls should probably be implemented.
+ */
+
+#include <asm/errno.h>
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+}
+
+extern int gpio_direction_input(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return at91_get_gpio_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	at91_set_gpio_value(gpio, value);
+}
+
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq;
+}
+
+#endif	/* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
new file mode 100644
index 0000000..da0b681
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/mach-at91/include/mach/hardware.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *  Copyright (C) 2003 ATMEL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+#if defined(CONFIG_ARCH_AT91RM9200)
+#include <mach/at91rm9200.h>
+#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
+#include <mach/at91sam9260.h>
+#elif defined(CONFIG_ARCH_AT91SAM9261)
+#include <mach/at91sam9261.h>
+#elif defined(CONFIG_ARCH_AT91SAM9263)
+#include <mach/at91sam9263.h>
+#elif defined(CONFIG_ARCH_AT91SAM9RL)
+#include <mach/at91sam9rl.h>
+#elif defined(CONFIG_ARCH_AT91CAP9)
+#include <mach/at91cap9.h>
+#elif defined(CONFIG_ARCH_AT91X40)
+#include <mach/at91x40.h>
+#else
+#error "Unsupported AT91 processor"
+#endif
+
+
+#ifdef CONFIG_MMU
+/*
+ * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
+ * to 0xFEF78000 .. 0xFF000000.  (544Kb)
+ */
+#define AT91_IO_PHYS_BASE	0xFFF78000
+#define AT91_IO_VIRT_BASE	(0xFF000000 - AT91_IO_SIZE)
+#else
+/*
+ * Identity mapping for the non MMU case.
+ */
+#define AT91_IO_PHYS_BASE	AT91_BASE_SYS
+#define AT91_IO_VIRT_BASE	AT91_IO_PHYS_BASE
+#endif
+
+#define AT91_IO_SIZE		(0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
+
+ /* Convert a physical IO address to virtual IO address */
+#define AT91_IO_P2V(x)		((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
+
+/*
+ * Virtual to Physical Address mapping for IO devices.
+ */
+#define AT91_VA_BASE_SYS	AT91_IO_P2V(AT91_BASE_SYS)
+#define AT91_VA_BASE_EMAC	AT91_IO_P2V(AT91RM9200_BASE_EMAC)
+
+ /* Internal SRAM is mapped below the IO devices */
+#define AT91_SRAM_MAX		SZ_1M
+#define AT91_VIRT_BASE		(AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
+
+/* Serial ports */
+#define ATMEL_MAX_UART		7		/* 6 USART3's and one DBGU port (SAM9260) */
+
+/* External Memory Map */
+#define AT91_CHIPSELECT_0	0x10000000
+#define AT91_CHIPSELECT_1	0x20000000
+#define AT91_CHIPSELECT_2	0x30000000
+#define AT91_CHIPSELECT_3	0x40000000
+#define AT91_CHIPSELECT_4	0x50000000
+#define AT91_CHIPSELECT_5	0x60000000
+#define AT91_CHIPSELECT_6	0x70000000
+#define AT91_CHIPSELECT_7	0x80000000
+
+/* SDRAM */
+#ifdef CONFIG_DRAM_BASE
+#define AT91_SDRAM_BASE		CONFIG_DRAM_BASE
+#else
+#define AT91_SDRAM_BASE		AT91_CHIPSELECT_1
+#endif
+
+/* Clocks */
+#define AT91_SLOW_CLOCK		32768		/* slow clock */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h
new file mode 100644
index 0000000..1611bd0
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/io.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-at91/include/mach/io.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT		0xFFFFFFFF
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned int at91_sys_read(unsigned int reg_offset)
+{
+	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
+
+	return __raw_readl(addr + reg_offset);
+}
+
+static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
+{
+	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
+
+	__raw_writel(value, addr + reg_offset);
+}
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/irqs.h b/arch/arm/mach-at91/include/mach/irqs.h
new file mode 100644
index 0000000..bda29ccb
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/irqs.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-at91/include/mach/irqs.h
+ *
+ *  Copyright (C) 2004 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <asm/io.h>
+#include <mach/at91_aic.h>
+
+#define NR_AIC_IRQS 32
+
+
+/*
+ * Acknowledge interrupt with AIC after interrupt has been handled.
+ *   (by kernel/irq.c)
+ */
+#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0)
+
+
+/*
+ * IRQ interrupt symbols are the AT91xxx_ID_* symbols
+ * for IRQs handled directly through the AIC, or else the AT91_PIN_*
+ * symbols in gpio.h for ones handled indirectly as GPIOs.
+ * We make provision for 5 banks of GPIO.
+ */
+#define	NR_IRQS		(NR_AIC_IRQS + (5 * 32))
+
+/* FIQ is AIC source 0. */
+#define FIQ_START AT91_ID_FIQ
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/memory.h b/arch/arm/mach-at91/include/mach/memory.h
new file mode 100644
index 0000000..9dd1b8c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/memory.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-at91/include/mach/memory.h
+ *
+ *  Copyright (C) 2004 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <mach/hardware.h>
+
+#define PHYS_OFFSET	(AT91_SDRAM_BASE)
+
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
new file mode 100644
index 0000000..e712658
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/system.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-at91/include/mach/system.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/at91_st.h>
+#include <mach/at91_dbgu.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * Disable the processor clock.  The processor will be automatically
+	 * re-enabled by an interrupt or by a reset.
+	 */
+//	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+
+	/*
+	 * Set the processor (CP15) into 'Wait for Interrupt' mode.
+	 * Unlike disabling the processor clock via the PMC (above)
+	 *  this allows the processor to be woken via JTAG.
+	 */
+	cpu_do_idle();
+}
+
+void (*at91_arch_reset)(void);
+
+static inline void arch_reset(char mode)
+{
+	/* call the CPU-specific reset function */
+	if (at91_arch_reset)
+		(at91_arch_reset)();
+}
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
new file mode 100644
index 0000000..d84c994
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/mach-at91/include/mach/timex.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#include <mach/hardware.h>
+
+#if defined(CONFIG_ARCH_AT91RM9200)
+
+#define CLOCK_TICK_RATE		(AT91_SLOW_CLOCK)
+
+#elif defined(CONFIG_ARCH_AT91SAM9260)
+
+#if defined(CONFIG_MACH_USB_A9260) || defined(CONFIG_MACH_QIL_A9260)
+#define AT91SAM9_MASTER_CLOCK	90000000
+#else
+#define AT91SAM9_MASTER_CLOCK	99300000
+#endif
+
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91SAM9261)
+
+#define AT91SAM9_MASTER_CLOCK	99300000
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91SAM9263)
+
+#if defined(CONFIG_MACH_USB_A9263)
+#define AT91SAM9_MASTER_CLOCK	90000000
+#else
+#define AT91SAM9_MASTER_CLOCK	99959500
+#endif
+
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91SAM9RL)
+
+#define AT91SAM9_MASTER_CLOCK	100000000
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91SAM9G20)
+
+#define AT91SAM9_MASTER_CLOCK	132096000
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91CAP9)
+
+#define AT91CAP9_MASTER_CLOCK	100000000
+#define CLOCK_TICK_RATE		(AT91CAP9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91X40)
+
+#define AT91X40_MASTER_CLOCK	40000000
+#define CLOCK_TICK_RATE		(AT91X40_MASTER_CLOCK)
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
new file mode 100644
index 0000000..0410d54
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -0,0 +1,76 @@
+/*
+ * arch/arm/mach-at91/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/io.h>
+#include <linux/atmel_serial.h>
+
+#if defined(CONFIG_AT91_EARLY_DBGU)
+#define UART_OFFSET (AT91_DBGU + AT91_BASE_SYS)
+#elif defined(CONFIG_AT91_EARLY_USART0)
+#define UART_OFFSET AT91_USART0
+#elif defined(CONFIG_AT91_EARLY_USART1)
+#define UART_OFFSET AT91_USART1
+#elif defined(CONFIG_AT91_EARLY_USART2)
+#define UART_OFFSET AT91_USART2
+#elif defined(CONFIG_AT91_EARLY_USART3)
+#define UART_OFFSET AT91_USART3
+#elif defined(CONFIG_AT91_EARLY_USART4)
+#define UART_OFFSET AT91_USART4
+#elif defined(CONFIG_AT91_EARLY_USART5)
+#define UART_OFFSET AT91_USART5
+#endif
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+#ifdef UART_OFFSET
+	void __iomem *sys = (void __iomem *) UART_OFFSET;	/* physical address */
+
+	while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY))
+		barrier();
+	__raw_writel(c, sys + ATMEL_US_THR);
+#endif
+}
+
+static inline void flush(void)
+{
+#ifdef UART_OFFSET
+	void __iomem *sys = (void __iomem *) UART_OFFSET;	/* physical address */
+
+	/* wait for transmission to complete */
+	while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
+		barrier();
+#endif
+}
+
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/vmalloc.h b/arch/arm/mach-at91/include/mach/vmalloc.h
new file mode 100644
index 0000000..8eb459f
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/vmalloc.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-at91/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END		(AT91_VIRT_BASE & PGDIR_MASK)
+
+#endif
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index a1bfc12..da3494a 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -25,7 +25,7 @@
 #include <linux/mm.h>
 #include <linux/types.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index f064b7a..fec03c5 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -13,8 +13,8 @@
 #include <linux/module.h>
 #include <linux/init.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 
 /* ------------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index a5cfe866..ec2fe4c 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -24,14 +24,14 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
+#include <mach/at91_pmc.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 
 #ifdef CONFIG_ARCH_AT91RM9200
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/at91rm9200_mc.h>
 
 /*
  * The AT91RM9200 goes into self-refresh mode with this command, and will
@@ -41,7 +41,7 @@
 #define sdram_selfrefresh_disable()	do {} while (0)
 
 #elif defined(CONFIG_ARCH_AT91CAP9)
-#include <asm/arch/at91cap9_ddrsdr.h>
+#include <mach/at91cap9_ddrsdr.h>
 
 static u32 saved_lpr;
 
@@ -58,7 +58,7 @@
 #define sdram_selfrefresh_disable()	at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
 
 #else
-#include <asm/arch/at91sam9_sdramc.h>
+#include <mach/at91sam9_sdramc.h>
 
 #ifdef CONFIG_ARCH_AT91SAM9263
 /*
@@ -91,8 +91,8 @@
  */
 #if defined(AT91_SHDWC)
 
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 static void __init show_reset_status(void)
 {
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index 25d18b7..474616d 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -23,7 +23,7 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/sizes.h>
 #include <asm/io.h>
 #include <asm/setup.h>
@@ -33,7 +33,7 @@
 #include <asm/page.h>
 
 #include <asm/mach/map.h>
-#include <asm/arch/autcpu12.h>
+#include <mach/autcpu12.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index 8520cb0..aa02aa5 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -23,7 +23,7 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index 9444ab1..8ada201 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -27,7 +27,7 @@
 
 #include <linux/kernel.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/sizes.h>
diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c
index 06f64ec..c58e32e 100644
--- a/arch/arm/mach-clps711x/edb7211-mm.c
+++ b/arch/arm/mach-clps711x/edb7211-mm.c
@@ -22,7 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/sizes.h>
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index c457a35..7122b3d 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -23,7 +23,7 @@
 #include <linux/init.h>
 #include <linux/initrd.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
diff --git a/include/asm-arm/arch-clps711x/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h
similarity index 100%
rename from include/asm-arm/arch-clps711x/autcpu12.h
rename to arch/arm/mach-clps711x/include/mach/autcpu12.h
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
new file mode 100644
index 0000000..64baf9f
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -0,0 +1,46 @@
+/* arch/arm/mach-clps711x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <asm/hardware/clps7111.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #CLPS7111_PHYS_BASE
+		movne	\rx, #CLPS7111_VIRT_BASE
+#ifndef CONFIG_DEBUG_CLPS711X_UART2
+		add	\rx, \rx, #0x0000	@ UART1
+#else
+		add	\rx, \rx, #0x1000	@ UART2
+#endif
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x0480]	@ UARTDR
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
+		tst	\rd, #1 << 11		@ UBUSYx
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+		tst	\rx, #0x1000		@ UART2 does not have CTS here
+		bne	1002f
+1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
+		tst	\rd, #1 << 8		@ CTS
+		bne	1001b
+1002:
+		.endm
+
diff --git a/arch/arm/mach-clps711x/include/mach/dma.h b/arch/arm/mach-clps711x/include/mach/dma.h
new file mode 100644
index 0000000..0d620e8
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/dma.h
@@ -0,0 +1,19 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/dma.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-clps711x/include/mach/entry-macro.S b/arch/arm/mach-clps711x/include/mach/entry-macro.S
new file mode 100644
index 0000000..90fa2f7
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/entry-macro.S
@@ -0,0 +1,58 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for CLPS711X-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/clps7111.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro	arch_ret_to_user, tmp1, tmp2
+		.endm
+
+#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1)
+#error INTSR stride != INTMR stride
+#endif
+
+		.macro	get_irqnr_and_base, irqnr, stat, base, mask
+		mov	\base, #CLPS7111_BASE
+		ldr	\stat, [\base, #INTSR1]
+		ldr	\mask, [\base, #INTMR1]
+		mov	\irqnr, #4
+		mov	\mask, \mask, lsl #16
+		and	\stat, \stat, \mask, lsr #16
+		movs	\stat, \stat, lsr #4
+		bne	1001f
+
+		add	\base, \base, #INTSR2 - INTSR1
+		ldr	\stat, [\base, #INTSR1]
+		ldr	\mask, [\base, #INTMR1]
+		mov	\irqnr, #16
+		mov	\mask, \mask, lsl #16
+		and	\stat, \stat, \mask, lsr #16
+
+1001:		tst	\stat, #255
+		addeq	\irqnr, \irqnr, #8
+		moveq	\stat, \stat, lsr #8
+		tst	\stat, #15
+		addeq	\irqnr, \irqnr, #4
+		moveq	\stat, \stat, lsr #4
+		tst	\stat, #3
+		addeq	\irqnr, \irqnr, #2
+		moveq	\stat, \stat, lsr #2
+		tst	\stat, #1
+		addeq	\irqnr, \irqnr, #1
+		moveq	\stat, \stat, lsr #1
+		tst	\stat, #1			@ bit 0 should be set
+		.endm
+
+
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
new file mode 100644
index 0000000..4c3e101
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -0,0 +1,237 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/hardware.h
+ *
+ *  This file contains the hardware definitions of the Prospector P720T.
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+
+#define CLPS7111_VIRT_BASE	0xff000000
+#define CLPS7111_BASE		CLPS7111_VIRT_BASE
+
+/*
+ * The physical addresses that the external chip select signals map to is
+ * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212
+ * processors.  CONFIG_EP72XX_BOOT_ROM is only available if these
+ * processors are in use.
+ */
+#ifndef CONFIG_EP72XX_ROM_BOOT
+#define CS0_PHYS_BASE		(0x00000000)
+#define CS1_PHYS_BASE		(0x10000000)
+#define CS2_PHYS_BASE		(0x20000000)
+#define CS3_PHYS_BASE		(0x30000000)
+#define CS4_PHYS_BASE		(0x40000000)
+#define CS5_PHYS_BASE		(0x50000000)
+#define CS6_PHYS_BASE		(0x60000000)
+#define CS7_PHYS_BASE		(0x70000000)
+#else
+#define CS0_PHYS_BASE		(0x70000000)
+#define CS1_PHYS_BASE		(0x60000000)
+#define CS2_PHYS_BASE		(0x50000000)
+#define CS3_PHYS_BASE		(0x40000000)
+#define CS4_PHYS_BASE		(0x30000000)
+#define CS5_PHYS_BASE		(0x20000000)
+#define CS6_PHYS_BASE		(0x10000000)
+#define CS7_PHYS_BASE		(0x00000000)
+#endif
+
+#if defined (CONFIG_ARCH_EP7211)
+
+#define EP7211_VIRT_BASE	CLPS7111_VIRT_BASE
+#define EP7211_BASE		CLPS7111_VIRT_BASE
+#include <asm/hardware/ep7211.h>
+
+#elif defined (CONFIG_ARCH_EP7212)
+
+#define EP7212_VIRT_BASE	CLPS7111_VIRT_BASE
+#define EP7212_BASE		CLPS7111_VIRT_BASE
+#include <asm/hardware/ep7212.h>
+
+#endif
+
+#define SYSPLD_VIRT_BASE	0xfe000000
+#define SYSPLD_BASE		SYSPLD_VIRT_BASE
+
+#ifndef __ASSEMBLER__
+
+#define PCIO_BASE		IO_BASE
+
+#endif
+
+
+#if  defined (CONFIG_ARCH_AUTCPU12)
+
+#define  CS89712_VIRT_BASE	CLPS7111_VIRT_BASE
+#define  CS89712_BASE		CLPS7111_VIRT_BASE
+
+#include <asm/hardware/clps7111.h>
+#include <asm/hardware/ep7212.h>
+#include <asm/hardware/cs89712.h>
+
+#endif
+
+
+#if defined (CONFIG_ARCH_CDB89712)
+
+#include <asm/hardware/clps7111.h>
+#include <asm/hardware/ep7212.h>
+#include <asm/hardware/cs89712.h>
+
+/* dynamic ioremap() areas */
+#define FLASH_START      0x00000000
+#define FLASH_SIZE       0x800000
+#define FLASH_WIDTH      4
+
+#define SRAM_START       0x60000000
+#define SRAM_SIZE        0xc000
+#define SRAM_WIDTH       4
+
+#define BOOTROM_START    0x70000000
+#define BOOTROM_SIZE     0x80
+#define BOOTROM_WIDTH    4
+
+
+/* static cdb89712_map_io() areas */
+#define REGISTER_START   0x80000000
+#define REGISTER_SIZE    0x4000
+#define REGISTER_BASE    0xff000000
+
+#define ETHER_START      0x20000000
+#define ETHER_SIZE       0x1000
+#define ETHER_BASE       0xfe000000
+
+#endif
+
+
+#if defined (CONFIG_ARCH_EDB7211)
+
+/*
+ * The extra 8 lines of the keyboard matrix are wired to chip select 3 (nCS3) 
+ * and repeat across it. This is the mapping for it.
+ *
+ * In jumpered boot mode, nCS3 is mapped to 0x4000000, not 0x3000000. This 
+ * was cause for much consternation and headscratching. This should probably
+ * be made a compile/run time kernel option.
+ */
+#define EP7211_PHYS_EXTKBD		CS3_PHYS_BASE	/* physical */
+
+#define EP7211_VIRT_EXTKBD		(0xfd000000)	/* virtual */
+
+
+/*
+ * The CS8900A ethernet chip has its I/O registers wired to chip select 2 
+ * (nCS2). This is the mapping for it.
+ *
+ * In jumpered boot mode, nCS2 is mapped to 0x5000000, not 0x2000000. This 
+ * was cause for much consternation and headscratching. This should probably
+ * be made a compile/run time kernel option.
+ */
+#define EP7211_PHYS_CS8900A		CS2_PHYS_BASE	/* physical */
+
+#define EP7211_VIRT_CS8900A		(0xfc000000)	/* virtual */
+
+
+/*
+ * The two flash banks are wired to chip selects 0 and 1. This is the mapping
+ * for them.
+ *
+ * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
+ * in jumpered boot mode.
+ */
+#define EP7211_PHYS_FLASH1		CS0_PHYS_BASE	/* physical */
+#define EP7211_PHYS_FLASH2		CS1_PHYS_BASE	/* physical */
+
+#define EP7211_VIRT_FLASH1		(0xfa000000)	/* virtual */
+#define EP7211_VIRT_FLASH2		(0xfb000000)	/* virtual */
+
+#endif /* CONFIG_ARCH_EDB7211 */
+
+
+/*
+ * Relevant bits in port D, which controls power to the various parts of
+ * the LCD on the EDB7211.
+ */
+#define EDB_PD1_LCD_DC_DC_EN	(1<<1)
+#define EDB_PD2_LCDEN		(1<<2)
+#define EDB_PD3_LCDBL		(1<<3)
+
+
+#if defined (CONFIG_ARCH_CEIVA)
+
+#define  CEIVA_VIRT_BASE	CLPS7111_VIRT_BASE
+#define  CEIVA_BASE		CLPS7111_VIRT_BASE
+
+#include <asm/hardware/clps7111.h>
+#include <asm/hardware/ep7212.h>
+
+
+/*
+ * The two flash banks are wired to chip selects 0 and 1. This is the mapping
+ * for them.
+ *
+ * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
+ * in jumpered boot mode.
+ */
+#define CEIVA_PHYS_FLASH1	CS0_PHYS_BASE	/* physical */
+#define CEIVA_PHYS_FLASH2	CS1_PHYS_BASE	/* physical */
+
+#define CEIVA_VIRT_FLASH1	(0xfa000000)	/* virtual */
+#define CEIVA_VIRT_FLASH2	(0xfb000000)	/* virtual */
+
+#define CEIVA_FLASH_SIZE        0x100000
+#define CEIVA_FLASH_WIDTH       2
+
+#define SRAM_START       0x60000000
+#define SRAM_SIZE        0xc000
+#define SRAM_WIDTH       4
+
+#define BOOTROM_START    0x70000000
+#define BOOTROM_SIZE     0x80
+#define BOOTROM_WIDTH    4
+
+/*
+ * SED1355 LCD controller
+ */
+#define CEIVA_PHYS_SED1355	CS2_PHYS_BASE
+#define CEIVA_VIRT_SED1355	(0xfc000000)
+
+/*
+ * Relevant bits in port D, which controls power to the various parts of
+ * the LCD on the Ceiva Photo Max, and reset to the LCD controller.
+ */
+
+// Reset line to SED1355 (must be high to operate)
+#define CEIVA_PD1_LCDRST	(1<<1)
+// LCD panel enable (set to one, to enable LCD)
+#define CEIVA_PD4_LCDEN		(1<<4)
+// Backlight (set to one, to turn on backlight
+#define CEIVA_PD5_LCDBL		(1<<5)
+
+/*
+ * Relevant bits in port B, which report the status of the buttons.
+ */
+
+// White button
+#define CEIVA_PB4_WHT_BTN	(1<<4)
+// Black button
+#define CEIVA_PB0_BLK_BTN	(1<<0)
+#endif // #if defined (CONFIG_ARCH_CEIVA)
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/io.h b/arch/arm/mach-clps711x/include/mach/io.h
new file mode 100644
index 0000000..4c84400
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/io.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/io.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+/*
+ * We don't support ins[lb]/outs[lb].  Make them fault.
+ */
+#define __raw_readsb(p,d,l)	do { *(int *)0 = 0; } while (0)
+#define __raw_readsl(p,d,l)	do { *(int *)0 = 0; } while (0)
+#define __raw_writesb(p,d,l)	do { *(int *)0 = 0; } while (0)
+#define __raw_writesl(p,d,l)	do { *(int *)0 = 0; } while (0)
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/irqs.h b/arch/arm/mach-clps711x/include/mach/irqs.h
new file mode 100644
index 0000000..30b7e97
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/irqs.h
@@ -0,0 +1,53 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/irqs.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Interrupts from INTSR1
+ */
+#define IRQ_CSINT			4
+#define IRQ_EINT1			5
+#define IRQ_EINT2			6
+#define IRQ_EINT3			7
+#define IRQ_TC1OI			8
+#define IRQ_TC2OI			9
+#define IRQ_RTCMI			10
+#define IRQ_TINT			11
+#define IRQ_UTXINT1			12
+#define IRQ_URXINT1			13
+#define IRQ_UMSINT			14
+#define IRQ_SSEOTI			15
+
+#define INT1_IRQS			(0x0000fff0)
+#define INT1_ACK_IRQS			(0x00004f10)
+
+/*
+ * Interrupts from INTSR2
+ */
+#define IRQ_KBDINT			(16+0)	/* bit 0 */
+#define IRQ_SS2RX			(16+1)	/* bit 1 */
+#define IRQ_SS2TX			(16+2)	/* bit 2 */
+#define IRQ_UTXINT2			(16+12)	/* bit 12 */
+#define IRQ_URXINT2			(16+13)	/* bit 13 */
+
+#define INT2_IRQS			(0x30070000)
+#define INT2_ACK_IRQS			(0x00010000)
+
+#define NR_IRQS                         30
+
diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h
new file mode 100644
index 0000000..71c2fa7
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/memory.h
@@ -0,0 +1,94 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/memory.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0xc0000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+
+#if defined(CONFIG_ARCH_CDB89712)
+
+#define __virt_to_bus(x)	(x)
+#define __bus_to_virt(x)	(x)
+
+#elif defined (CONFIG_ARCH_AUTCPU12)
+
+#define __virt_to_bus(x)	(x)
+#define __bus_to_virt(x)	(x)
+
+#else
+
+#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
+#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
+
+#endif
+
+
+/*
+ * Like the SA1100, the EDB7211 has a large gap between physical RAM
+ * banks.  In 2.2, the Psion (CL-PS7110) port added custom support for
+ * discontiguous physical memory.  In 2.4, we can use the standard
+ * Linux NUMA support.
+ *
+ * This is not necessary for EP7211 implementations with only one used
+ * memory bank.  For those systems, simply undefine CONFIG_DISCONTIGMEM.
+ */
+
+/*
+ * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211
+ * uses only one of the two banks (bank #1).  However, even within
+ * bank #1, memory is discontiguous.
+ *
+ * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between
+ * them, so we use 24 for the node max shift to get 16MB node sizes.
+ */
+
+/*
+ * Because of the wide memory address space between physical RAM banks on the 
+ * SA1100, it's much more convenient to use Linux's NUMA support to implement
+ * our memory map representation.  Assuming all memory nodes have equal access 
+ * characteristics, we then have generic discontiguous memory support.
+ *
+ * Of course, all this isn't mandatory for SA1100 implementations with only
+ * one used memory bank.  For those, simply undefine CONFIG_DISCONTIGMEM.
+ *
+ * The nodes are matched with the physical memory bank addresses which are 
+ * incidentally the same as virtual addresses.
+ * 
+ * 	node 0:  0xc0000000 - 0xc7ffffff
+ * 	node 1:  0xc8000000 - 0xcfffffff
+ * 	node 2:  0xd0000000 - 0xd7ffffff
+ * 	node 3:  0xd8000000 - 0xdfffffff
+ */
+#define NODE_MEM_SIZE_BITS	24
+
+#endif
+
diff --git a/arch/arm/mach-clps711x/include/mach/syspld.h b/arch/arm/mach-clps711x/include/mach/syspld.h
new file mode 100644
index 0000000..f7f4c12
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/syspld.h
@@ -0,0 +1,121 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/syspld.h
+ *
+ *  System Control PLD register definitions.
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSPLD_H
+#define __ASM_ARCH_SYSPLD_H
+
+#define SYSPLD_PHYS_BASE	(0x10000000)
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+#define SYSPLD_REG(type,off)	(*(volatile type *)(SYSPLD_BASE + off))
+#else
+#define SYSPLD_REG(type,off)	(off)
+#endif
+
+#define PLD_INT		SYSPLD_REG(u32, 0x000000)
+#define PLD_INT_PENIRQ		(1 << 5)
+#define PLD_INT_UCB_IRQ		(1 << 1)
+#define PLD_INT_KBD_ATN		(1 << 0)	/* EINT1 */
+
+#define PLD_PWR		SYSPLD_REG(u32, 0x000004)
+#define PLD_PWR_EXT		(1 << 5)
+#define PLD_PWR_MODE		(1 << 4)	/* 1 = PWM, 0 = PFM */
+#define PLD_S4_ON		(1 << 3)	/* LCD bias voltage enable */
+#define PLD_S3_ON		(1 << 2)	/* LCD backlight enable */
+#define PLD_S2_ON		(1 << 1)	/* LCD 3V3 supply enable */
+#define PLD_S1_ON		(1 << 0)	/* LCD 3V supply enable */
+
+#define PLD_KBD		SYSPLD_REG(u32, 0x000008)
+#define PLD_KBD_WAKE		(1 << 1)
+#define PLD_KBD_EN		(1 << 0)
+
+#define PLD_SPI		SYSPLD_REG(u32, 0x00000c)
+#define PLD_SPI_EN		(1 << 0)
+
+#define PLD_IO		SYSPLD_REG(u32, 0x000010)
+#define PLD_IO_BOOTSEL		(1 << 6)	/* boot sel switch */
+#define PLD_IO_USER		(1 << 5)	/* user defined switch */
+#define PLD_IO_LED3		(1 << 4)
+#define PLD_IO_LED2		(1 << 3)
+#define PLD_IO_LED1		(1 << 2)
+#define PLD_IO_LED0		(1 << 1)
+#define PLD_IO_LEDEN		(1 << 0)
+
+#define PLD_IRDA	SYSPLD_REG(u32, 0x000014)
+#define PLD_IRDA_EN		(1 << 0)
+
+#define PLD_COM2	SYSPLD_REG(u32, 0x000018)
+#define PLD_COM2_EN		(1 << 0)
+
+#define PLD_COM1	SYSPLD_REG(u32, 0x00001c)
+#define PLD_COM1_EN		(1 << 0)
+
+#define PLD_AUD		SYSPLD_REG(u32, 0x000020)
+#define PLD_AUD_DIV1		(1 << 6)
+#define PLD_AUD_DIV0		(1 << 5)
+#define PLD_AUD_CLK_SEL1	(1 << 4)
+#define PLD_AUD_CLK_SEL0	(1 << 3)
+#define PLD_AUD_MIC_PWR		(1 << 2)
+#define PLD_AUD_MIC_GAIN	(1 << 1)
+#define PLD_AUD_CODEC_EN	(1 << 0)
+
+#define PLD_CF		SYSPLD_REG(u32, 0x000024)
+#define PLD_CF2_SLEEP		(1 << 5)
+#define PLD_CF1_SLEEP		(1 << 4)
+#define PLD_CF2_nPDREQ		(1 << 3)
+#define PLD_CF1_nPDREQ		(1 << 2)
+#define PLD_CF2_nIRQ		(1 << 1)
+#define PLD_CF1_nIRQ		(1 << 0)
+
+#define PLD_SDC		SYSPLD_REG(u32, 0x000028)
+#define PLD_SDC_INT_EN		(1 << 2)
+#define PLD_SDC_WP		(1 << 1)
+#define PLD_SDC_CD		(1 << 0)
+
+#define PLD_FPGA	SYSPLD_REG(u32, 0x00002c)
+
+#define PLD_CODEC	SYSPLD_REG(u32, 0x400000)
+#define PLD_CODEC_IRQ3		(1 << 4)
+#define PLD_CODEC_IRQ2		(1 << 3)
+#define PLD_CODEC_IRQ1		(1 << 2)
+#define PLD_CODEC_EN		(1 << 0)
+
+#define PLD_BRITE	SYSPLD_REG(u32, 0x400004)
+#define PLD_BRITE_UP		(1 << 1)
+#define PLD_BRITE_DN		(1 << 0)
+
+#define PLD_LCDEN	SYSPLD_REG(u32, 0x400008)
+#define PLD_LCDEN_EN		(1 << 0)
+
+#define PLD_ID		SYSPLD_REG(u32, 0x40000c)
+
+#define PLD_TCH		SYSPLD_REG(u32, 0x400010)
+#define PLD_TCH_PENIRQ		(1 << 1)
+#define PLD_TCH_EN		(1 << 0)
+
+#define PLD_GPIO	SYSPLD_REG(u32, 0x400014)
+#define PLD_GPIO2		(1 << 2)
+#define PLD_GPIO1		(1 << 1)
+#define PLD_GPIO0		(1 << 0)
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h
new file mode 100644
index 0000000..a8eade4
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/system.h
@@ -0,0 +1,40 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/system.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <asm/hardware/clps7111.h>
+#include <asm/io.h>
+
+static inline void arch_idle(void)
+{
+	clps_writel(1, HALT);
+	__asm__ __volatile__(
+	"mov	r0, r0\n\
+	mov	r0, r0");
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/time.h b/arch/arm/mach-clps711x/include/mach/time.h
new file mode 100644
index 0000000..8fe283c
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/time.h
@@ -0,0 +1,49 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/time.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <asm/leds.h>
+#include <asm/hardware/clps7111.h>
+
+extern void clps711x_setup_timer(void);
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t
+p720t_timer_interrupt(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+	do_leds();
+	do_timer(1);
+#ifndef CONFIG_SMP
+	update_process_times(user_mode(regs));
+#endif
+	do_profile(regs);
+	return IRQ_HANDLED;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+void __init time_init(void)
+{
+	clps711x_setup_timer();
+	timer_irq.handler = p720t_timer_interrupt;
+	setup_irq(IRQ_TC2OI, &timer_irq);
+}
diff --git a/arch/arm/mach-clps711x/include/mach/timex.h b/arch/arm/mach-clps711x/include/mach/timex.h
new file mode 100644
index 0000000..ac8823c
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/timex.h
@@ -0,0 +1,23 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/timex.h
+ *
+ *  Prospector 720T architecture timex specifications
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE 512000
diff --git a/arch/arm/mach-clps711x/include/mach/uncompress.h b/arch/arm/mach-clps711x/include/mach/uncompress.h
new file mode 100644
index 0000000..7164310
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/uncompress.h
@@ -0,0 +1,59 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <mach/io.h>
+#include <mach/hardware.h>
+#include <asm/hardware/clps7111.h>
+
+#undef CLPS7111_BASE
+#define CLPS7111_BASE CLPS7111_PHYS_BASE
+
+#define __raw_readl(p)		(*(unsigned long *)(p))
+#define __raw_writel(v,p)	(*(unsigned long *)(p) = (v))
+
+#ifdef CONFIG_DEBUG_CLPS711X_UART2
+#define SYSFLGx	SYSFLG2
+#define UARTDRx	UARTDR2
+#else
+#define SYSFLGx	SYSFLG1
+#define UARTDRx	UARTDR1
+#endif
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	while (clps_readl(SYSFLGx) & SYSFLG_UTXFF)
+		barrier();
+	clps_writel(c, UARTDRx);
+}
+
+static inline void flush(void)
+{
+	while (clps_readl(SYSFLGx) & SYSFLG_UBUSY)
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-clps711x/include/mach/vmalloc.h b/arch/arm/mach-clps711x/include/mach/vmalloc.h
new file mode 100644
index 0000000..ea6cc7b
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-clps711x/irq.c b/arch/arm/mach-clps711x/irq.c
index 6954a7a4..38623cf 100644
--- a/arch/arm/mach-clps711x/irq.c
+++ b/arch/arm/mach-clps711x/irq.c
@@ -21,7 +21,7 @@
 #include <linux/list.h>
 
 #include <asm/mach/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-clps711x/mm.c b/arch/arm/mach-clps711x/mm.c
index 43c2fa8..a7b4591 100644
--- a/arch/arm/mach-clps711x/mm.c
+++ b/arch/arm/mach-clps711x/mm.c
@@ -25,7 +25,7 @@
 #include <linux/bootmem.h>
 
 #include <asm/sizes.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-clps711x/p720t-leds.c b/arch/arm/mach-clps711x/p720t-leds.c
index a9b9c5b..262c3c3 100644
--- a/arch/arm/mach-clps711x/p720t-leds.c
+++ b/arch/arm/mach-clps711x/p720t-leds.c
@@ -22,7 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index 80d8fd2..f51f97d 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -23,7 +23,7 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/syspld.h>
+#include <mach/syspld.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-clps711x/time.c b/arch/arm/mach-clps711x/time.c
index d922a89..ef1fcd1 100644
--- a/arch/arm/mach-clps711x/time.c
+++ b/arch/arm/mach-clps711x/time.c
@@ -22,7 +22,7 @@
 #include <linux/irq.h>
 #include <linux/sched.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/io.h>
diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c
index cfd8aca..cc1b821 100644
--- a/arch/arm/mach-clps7500/core.c
+++ b/arch/arm/mach-clps7500/core.c
@@ -21,7 +21,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iomd.h>
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/include/asm-arm/arch-cl7500/acornfb.h b/arch/arm/mach-clps7500/include/mach/acornfb.h
similarity index 100%
rename from include/asm-arm/arch-cl7500/acornfb.h
rename to arch/arm/mach-clps7500/include/mach/acornfb.h
diff --git a/arch/arm/mach-clps7500/include/mach/debug-macro.S b/arch/arm/mach-clps7500/include/mach/debug-macro.S
new file mode 100644
index 0000000..af4104e
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/debug-macro.S
@@ -0,0 +1,21 @@
+/* arch/arm/mach-clps7500/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mov	\rx, #0xe0000000
+		orr	\rx, \rx, #0x00010000
+		orr	\rx, \rx, #0x00000be0
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-clps7500/include/mach/dma.h b/arch/arm/mach-clps7500/include/mach/dma.h
new file mode 100644
index 0000000..63fcde5
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/dma.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/dma.h
+ *
+ * Copyright (C) 1999 Nexus Electronics Ltd.
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS		0xd0000000
+
+#define DMA_S0			0
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-clps7500/include/mach/entry-macro.S b/arch/arm/mach-clps7500/include/mach/entry-macro.S
new file mode 100644
index 0000000..4e7e541
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/entry-macro.S
@@ -0,0 +1,16 @@
+#include <mach/hardware.h>
+#include <asm/hardware/entry-macro-iomd.S>
+
+	.equ	ioc_base_high, IOC_BASE & 0xff000000
+	.equ	ioc_base_low, IOC_BASE & 0x00ff0000
+
+	.macro  get_irqnr_preamble, base, tmp
+	mov	\base, #ioc_base_high		@ point at IOC
+	.if	ioc_base_low
+	orr	\base, \base, #ioc_base_low
+	.endif
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
diff --git a/arch/arm/mach-clps7500/include/mach/hardware.h b/arch/arm/mach-clps7500/include/mach/hardware.h
new file mode 100644
index 0000000..d66578a
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/hardware.h
@@ -0,0 +1,67 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/hardware.h
+ *
+ * Copyright (C) 1996-1999 Russell King.
+ * Copyright (C) 1999 Nexus Electronics Ltd.
+ *
+ * This file contains the hardware definitions of the 
+ * CL7500 evaluation board.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/memory.h>
+#include <asm/hardware/iomd.h>
+
+#ifdef __ASSEMBLY__
+#define IOMEM(x) x
+#else
+#define IOMEM(x) ((void __iomem *)(x))
+#endif
+
+/*
+ * What hardware must be present
+ */
+#define HAS_IOMD
+#define HAS_VIDC20
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+
+#define IO_START		0x03000000	/* I/O */
+#define IO_SIZE			0x01000000
+#define IO_BASE			IOMEM(0xe0000000)
+
+#define ISA_START		0x0c000000	/* ISA */
+#define ISA_SIZE		0x00010000
+#define ISA_BASE		0xe1000000
+
+#define FLASH_START		0x01000000	/* XXX */
+#define FLASH_SIZE		0x01000000
+#define FLASH_BASE		0xe2000000
+
+#define LED_START		0x0302B000
+#define LED_SIZE		0x00001000
+#define LED_BASE		0xe3000000
+#define LED_ADDRESS		(LED_BASE + 0xa00)
+
+/* Let's define SCREEN_START for CL7500, even though it's a lie. */
+#define SCREEN_START		0x02000000	/* VRAM */
+#define SCREEN_END		0xdfc00000
+#define SCREEN_BASE		0xdf800000
+
+#define VIDC_BASE		(void __iomem *)0xe0400000
+#define IOMD_BASE		IOMEM(0xe0200000)
+#define IOC_BASE		IOMEM(0xe0200000)
+#define FLOPPYDMA_BASE		IOMEM(0xe002a000)
+#define PCIO_BASE		IOMEM(0xe0010000)
+
+#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
+
+/* in/out bias for the ISA slot region */
+#define ISASLOT_IO		0x80400000
+
+#endif
diff --git a/arch/arm/mach-clps7500/include/mach/io.h b/arch/arm/mach-clps7500/include/mach/io.h
new file mode 100644
index 0000000..2ff2860
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/io.h
@@ -0,0 +1,255 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/io.h
+ *  from arch/arm/mach-rpc/include/mach/io.h
+ *
+ * Copyright (C) 1997 Russell King
+ *
+ * Modifications:
+ *  06-Dec-1997	RMK	Created.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * GCC is totally crap at loading/storing data.  We try to persuade it
+ * to do the right thing by using these whereever possible instead of
+ * the above.
+ */
+#define __arch_base_getb(b,o)			\
+ ({						\
+	unsigned int v, r = (b);		\
+	__asm__ __volatile__(			\
+		"ldrb	%0, [%1, %2]"		\
+		: "=r" (v)			\
+		: "r" (r), "Ir" (o));		\
+	v;					\
+ })
+
+#define __arch_base_getl(b,o)			\
+ ({						\
+	unsigned int v, r = (b);		\
+	__asm__ __volatile__(			\
+		"ldr	%0, [%1, %2]"		\
+		: "=r" (v)			\
+		: "r" (r), "Ir" (o));		\
+	v;					\
+ })
+
+#define __arch_base_putb(v,b,o)			\
+ ({						\
+	unsigned int r = (b);			\
+	__asm__ __volatile__(			\
+		"strb	%0, [%1, %2]"		\
+		:				\
+		: "r" (v), "r" (r), "Ir" (o));	\
+ })
+
+#define __arch_base_putl(v,b,o)			\
+ ({						\
+	unsigned int r = (b);			\
+	__asm__ __volatile__(			\
+		"str	%0, [%1, %2]"		\
+		:				\
+		: "r" (v), "r" (r), "Ir" (o));	\
+ })
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses.  PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
+ * and are translated to the start of IO.  Note that all addresses are
+ * shifted left!
+ */
+#define __PORT_PCIO(x)	(!((x) & 0x80000000))
+
+/*
+ * Dynamic IO functions - let the compiler
+ * optimize the expressions
+ */
+static inline void __outb (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"strb	%1, [%0, %2, lsl #2]	@ outb"
+	: "=&r" (temp)
+	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+static inline void __outw (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"str	%1, [%0, %2, lsl #2]	@ outw"
+	: "=&r" (temp)
+	: "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+static inline void __outl (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"str	%1, [%0, %2, lsl #2]	@ outl"
+	: "=&r" (temp)
+	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr)					\
+static inline unsigned sz __in##fnsuffix (unsigned int port)		\
+{										\
+	unsigned long temp, value;						\
+	__asm__ __volatile__(							\
+	"tst	%2, #0x80000000\n\t"						\
+	"mov	%0, %4\n\t"							\
+	"addeq	%0, %0, %3\n\t"							\
+	"ldr" instr "	%1, [%0, %2, lsl #2]	@ in" #fnsuffix			\
+	: "=&r" (temp), "=r" (value)						\
+	: "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)		\
+	: "cc");								\
+	return (unsigned sz)value;						\
+}
+
+static inline unsigned int __ioaddr (unsigned int port)			\
+{										\
+	if (__PORT_PCIO(port))							\
+		return (unsigned int)(PCIO_BASE + (port << 2));			\
+	else									\
+		return (unsigned int)(IO_BASE + (port << 2));			\
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr)	\
+	DECLARE_DYN_IN(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"")
+DECLARE_IO(int,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port)							\
+({										\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"strb	%0, [%1, %2]	@ outbc"				\
+		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"strb	%0, [%1, %2]	@ outbc"				\
+		: : "r" (value), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inbc(port)								\
+({										\
+	unsigned char result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldrb	%0, [%1, %2]	@ inbc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldrb	%0, [%1, %2]	@ inbc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result;									\
+})
+
+#define __outwc(value,port)							\
+({										\
+	unsigned long v = value;						\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outwc"				\
+		: : "r" (v|v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2));	\
+	else									\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outwc"				\
+		: : "r" (v|v<<16), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inwc(port)								\
+({										\
+	unsigned short result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inwc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inwc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result & 0xffff;							\
+})
+
+#define __outlc(value,port)							\
+({										\
+	unsigned long v = value;						\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outlc"				\
+		: : "r" (v), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outlc"				\
+		: : "r" (v), "r" (IO_BASE), "r" ((port) << 2));			\
+})
+
+#define __inlc(port)								\
+({										\
+	unsigned long result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inlc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inlc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result;									\
+})
+
+#define __ioaddrc(port)								\
+	(__PORT_PCIO((port)) ? PCIO_BASE + ((port) << 2) : IO_BASE + ((port) << 2))
+
+#define inb(p)	 	(__builtin_constant_p((p)) ? __inbc(p)    : __inb(p))
+#define inw(p)	 	(__builtin_constant_p((p)) ? __inwc(p)    : __inw(p))
+#define inl(p)	 	(__builtin_constant_p((p)) ? __inlc(p)    : __inl(p))
+#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
+/* the following macro is deprecated */
+#define ioaddr(port)			__ioaddr((port))
+
+#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
+#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
+
+#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
+#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+#define __mem_pci(x)	(x)
+
+#endif
diff --git a/arch/arm/mach-clps7500/include/mach/irq.h b/arch/arm/mach-clps7500/include/mach/irq.h
new file mode 100644
index 0000000..e8da3c5
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/irq.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/irq.h
+ *
+ * Copyright (C) 1996 Russell King
+ * Copyright (C) 1999, 2001 Nexus Electronics Ltd.
+ *
+ * Changelog:
+ *   10-10-1996	RMK	Brought up to date with arch-sa110eval
+ *   22-08-1998	RMK	Restructured IRQ routines
+ *   11-08-1999	PJB	Created ARM7500 version, derived from RiscPC code
+ */
+
+#include <asm/hardware/iomd.h>
+#include <asm/io.h>
+
+static inline int fixup_irq(unsigned int irq)
+{
+	if (irq == IRQ_ISA) {
+		int isabits = *((volatile unsigned int *)0xe002b700);
+		if (isabits == 0) {
+			printk("Spurious ISA IRQ!\n");
+			return irq;
+		}
+		irq = IRQ_ISA_BASE;
+		while (!(isabits & 1)) {
+			irq++;
+			isabits >>= 1;
+		}
+	}
+
+	return irq;
+}
diff --git a/arch/arm/mach-clps7500/include/mach/irqs.h b/arch/arm/mach-clps7500/include/mach/irqs.h
new file mode 100644
index 0000000..bee66b4
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/irqs.h
@@ -0,0 +1,66 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/irqs.h
+ *
+ * Copyright (C) 1999 Nexus Electronics Ltd
+ */
+
+#define IRQ_INT2		0
+#define IRQ_INT1		2
+#define IRQ_VSYNCPULSE		3
+#define IRQ_POWERON		4
+#define IRQ_TIMER0		5
+#define IRQ_TIMER1		6
+#define IRQ_FORCE		7
+#define IRQ_INT8		8
+#define IRQ_ISA			9
+#define IRQ_INT6		10
+#define IRQ_INT5		11
+#define IRQ_INT4		12
+#define IRQ_INT3		13
+#define IRQ_KEYBOARDTX		14
+#define IRQ_KEYBOARDRX		15
+
+#define IRQ_DMA0		16
+#define IRQ_DMA1		17
+#define IRQ_DMA2		18
+#define IRQ_DMA3		19
+#define IRQ_DMAS0		20
+#define IRQ_DMAS1		21
+
+#define IRQ_IOP0		24
+#define IRQ_IOP1		25
+#define IRQ_IOP2		26
+#define IRQ_IOP3		27
+#define IRQ_IOP4		28
+#define IRQ_IOP5		29
+#define IRQ_IOP6		30
+#define IRQ_IOP7		31
+
+#define IRQ_MOUSERX		40
+#define IRQ_MOUSETX		41
+#define IRQ_ADC			42
+#define IRQ_EVENT1		43
+#define IRQ_EVENT2		44
+
+#define IRQ_ISA_BASE		48
+#define IRQ_ISA_3		48
+#define IRQ_ISA_4		49
+#define IRQ_ISA_5		50
+#define IRQ_ISA_7		51
+#define IRQ_ISA_9		52
+#define IRQ_ISA_10		53
+#define IRQ_ISA_11		54
+#define IRQ_ISA_14		55	
+
+#define FIQ_INT9		0
+#define FIQ_INT5		1
+#define FIQ_INT6		4
+#define FIQ_INT8		6
+#define FIQ_FORCE		7
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START		64
+
+#define IRQ_TIMER		IRQ_TIMER0
diff --git a/arch/arm/mach-clps7500/include/mach/memory.h b/arch/arm/mach-clps7500/include/mach/memory.h
new file mode 100644
index 0000000..3326aa9
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/memory.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/memory.h
+ *
+ * Copyright (c) 1996,1997,1998 Russell King.
+ *
+ * Changelog:
+ *  20-Oct-1996	RMK	Created
+ *  31-Dec-1997	RMK	Fixed definitions to reduce warnings
+ *  11-Jan-1998	RMK	Uninlined to reduce hits on cache
+ *  08-Feb-1998	RMK	Added __virt_to_bus and __bus_to_virt
+ *  21-Mar-1999	RMK	Renamed to memory.h
+ *		RMK	Added TASK_SIZE and PAGE_OFFSET
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x10000000)
+
+/*
+ * These are exactly the same on the RiscPC as the
+ * physical memory view.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * Cache flushing area - ROM
+ */
+#define FLUSH_BASE_PHYS		0x00000000
+#define FLUSH_BASE		0xdf000000
+
+#endif
diff --git a/arch/arm/mach-clps7500/include/mach/system.h b/arch/arm/mach-clps7500/include/mach/system.h
new file mode 100644
index 0000000..624fc28
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/system.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/system.h
+ *
+ * Copyright (c) 1999 Nexus Electronics Ltd.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/hardware/iomd.h>
+#include <asm/io.h>
+
+static inline void arch_idle(void)
+{
+	iomd_writeb(0, IOMD_SUSMODE);
+}
+
+#define arch_reset(mode)			\
+	do {					\
+		iomd_writeb(0, IOMD_ROMCR0);	\
+		cpu_reset(0);			\
+	} while (0)
+
+#endif
diff --git a/arch/arm/mach-clps7500/include/mach/timex.h b/arch/arm/mach-clps7500/include/mach/timex.h
new file mode 100644
index 0000000..dfaa9b4
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/timex.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/timex.h
+ *
+ * CL7500 architecture timex specifications
+ *
+ * Copyright (C) 1999 Nexus Electronics Ltd
+ */
+
+/*
+ * On the ARM7500, the clock ticks at 2MHz.
+ */
+#define CLOCK_TICK_RATE		2000000
+
diff --git a/arch/arm/mach-clps7500/include/mach/uncompress.h b/arch/arm/mach-clps7500/include/mach/uncompress.h
new file mode 100644
index 0000000..d7d0af4
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/uncompress.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/uncompress.h
+ *
+ * Copyright (C) 1999, 2000 Nexus Electronics Ltd.
+ */
+#define BASE 0x03010000
+#define SERBASE (BASE + (0x2f8 << 2))
+
+static inline void putc(char c)
+{
+	while (!(*((volatile unsigned int *)(SERBASE + 0x14)) & 0x20))
+		barrier();
+
+	*((volatile unsigned int *)(SERBASE)) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void arch_decomp_setup(void)
+{
+	int baud = 3686400 / (9600 * 32);
+
+	*((volatile unsigned int *)(SERBASE + 0xC)) = 0x80;
+	*((volatile unsigned int *)(SERBASE + 0x0)) = baud & 0xff;
+	*((volatile unsigned int *)(SERBASE + 0x4)) = (baud & 0xff00) >> 8;
+	*((volatile unsigned int *)(SERBASE + 0xC)) = 3; /* 8 bits */
+	*((volatile unsigned int *)(SERBASE + 0x10)) = 3; /* DTR, RTS */
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-clps7500/include/mach/vmalloc.h b/arch/arm/mach-clps7500/include/mach/vmalloc.h
new file mode 100644
index 0000000..8fc5406
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/vmalloc.h
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x1c000000)
diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c
index 7497619..1343557 100644
--- a/arch/arm/mach-davinci/board-evm.c
+++ b/arch/arm/mach-davinci/board-evm.c
@@ -20,13 +20,13 @@
 #include <asm/setup.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/common.h>
+#include <mach/common.h>
 
 /* other misc. init functions */
 void __init davinci_psc_init(void);
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index 0014fb1..d46c69b 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -17,10 +17,10 @@
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/psc.h>
+#include <mach/psc.h>
 #include "clock.h"
 
 /* PLL/Reset register offsets */
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index 9c67886..c9cb4f0 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -20,9 +20,9 @@
 #include <linux/irq.h>
 #include <linux/bitops.h>
 
-#include <asm/arch/irqs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/gpio.h>
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
 
 #include <asm/mach/irq.h>
 
diff --git a/arch/arm/mach-davinci/include/mach/clock.h b/arch/arm/mach-davinci/include/mach/clock.h
new file mode 100644
index 0000000..38bdd49
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/clock.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-davinci/include/mach/clock.h
+ *
+ * Clock control driver for DaVinci - header file
+ *
+ * Authors: Vladimir Barinov <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DAVINCI_CLOCK_H
+#define __ASM_ARCH_DAVINCI_CLOCK_H
+
+struct clk;
+
+extern int clk_register(struct clk *clk);
+extern void clk_unregister(struct clk *clk);
+extern int davinci_clk_init(void);
+
+#endif
diff --git a/include/asm-arm/arch-davinci/common.h b/arch/arm/mach-davinci/include/mach/common.h
similarity index 100%
rename from include/asm-arm/arch-davinci/common.h
rename to arch/arm/mach-davinci/include/mach/common.h
diff --git a/include/asm-arm/arch-davinci/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
similarity index 100%
rename from include/asm-arm/arch-davinci/debug-macro.S
rename to arch/arm/mach-davinci/include/mach/debug-macro.S
diff --git a/include/asm-arm/arch-davinci/dma.h b/arch/arm/mach-davinci/include/mach/dma.h
similarity index 100%
rename from include/asm-arm/arch-davinci/dma.h
rename to arch/arm/mach-davinci/include/mach/dma.h
diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S
new file mode 100644
index 0000000..039b84f
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * Low-level IRQ helper macros for TI DaVinci-based platforms
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <mach/io.h>
+#include <mach/irqs.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr \tmp, [\base, #0x14]
+		mov \tmp, \tmp, lsr #2
+		sub \irqnr, \tmp, #1
+		cmp \tmp, #0
+		.endm
+
+		.macro	irq_prio_table
+		.endm
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
new file mode 100644
index 0000000..ec151cc
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -0,0 +1,159 @@
+/*
+ * TI DaVinci GPIO Support
+ *
+ * Copyright (c) 2006 David Brownell
+ * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef	__DAVINCI_GPIO_H
+#define	__DAVINCI_GPIO_H
+
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+/*
+ * basic gpio routines
+ *
+ * board-specific init should be done by arch/.../.../board-XXX.c (maybe
+ * initializing banks together) rather than boot loaders; kexec() won't
+ * go through boot loaders.
+ *
+ * the gpio clock will be turned on when gpios are used, and you may also
+ * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
+ * used as gpios, not with other peripherals.
+ *
+ * GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation, and maybe
+ * for later updates, code should write GPIO(N) or:
+ *  - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
+ *  - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
+ *
+ * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
+ * for now, that's != GPIO(N)
+ */
+#define	GPIO(X)		(X)		/* 0 <= X <= 70 */
+#define	GPIOV18(X)	(X)		/* 1.8V i/o; 0 <= X <= 53 */
+#define	GPIOV33(X)	((X)+54)	/* 3.3V i/o; 0 <= X <= 17 */
+
+struct gpio_controller {
+	u32	dir;
+	u32	out_data;
+	u32	set_data;
+	u32	clr_data;
+	u32	in_data;
+	u32	set_rising;
+	u32	clr_rising;
+	u32	set_falling;
+	u32	clr_falling;
+	u32	intstat;
+};
+
+/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
+ * with constant parameters; or in outlined code they execute at runtime.
+ *
+ * You'd access the controller directly when reading or writing more than
+ * one gpio value at a time, and to support wired logic where the value
+ * being driven by the cpu need not match the value read back.
+ *
+ * These are NOT part of the cross-platform GPIO interface
+ */
+static inline struct gpio_controller *__iomem
+__gpio_to_controller(unsigned gpio)
+{
+	void *__iomem ptr;
+
+	if (gpio < 32)
+		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
+	else if (gpio < 64)
+		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
+	else if (gpio < DAVINCI_N_GPIO)
+		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+	else
+		ptr = NULL;
+	return ptr;
+}
+
+static inline u32 __gpio_mask(unsigned gpio)
+{
+	return 1 << (gpio % 32);
+}
+
+/* The get/set/clear functions will inline when called with constant
+ * parameters, for low-overhead bitbanging.  Illegal constant parameters
+ * cause link-time errors.
+ *
+ * Otherwise, calls with variable parameters use outlined functions.
+ */
+extern int __error_inval_gpio(void);
+
+extern void __gpio_set(unsigned gpio, int value);
+extern int __gpio_get(unsigned gpio);
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (__builtin_constant_p(value)) {
+		struct gpio_controller	*__iomem g;
+		u32			mask;
+
+		if (gpio >= DAVINCI_N_GPIO)
+			__error_inval_gpio();
+
+		g = __gpio_to_controller(gpio);
+		mask = __gpio_mask(gpio);
+		if (value)
+			__raw_writel(mask, &g->set_data);
+		else
+			__raw_writel(mask, &g->clr_data);
+		return;
+	}
+
+	__gpio_set(gpio, value);
+}
+
+/* Returns zero or nonzero; works for gpios configured as inputs OR
+ * as outputs.
+ *
+ * NOTE: changes in reported values are synchronized to the GPIO clock.
+ * This is most easily seen after calling gpio_set_value() and then immediatly
+ * gpio_get_value(), where the gpio_get_value() would return the old value
+ * until the GPIO clock ticks and the new value gets latched.
+ */
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	struct gpio_controller *__iomem g;
+
+	if (!__builtin_constant_p(gpio))
+		return __gpio_get(gpio);
+
+	if (gpio >= DAVINCI_N_GPIO)
+		return __error_inval_gpio();
+
+	g = __gpio_to_controller(gpio);
+	return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data));
+}
+
+/* powerup default direction is IN */
+extern int gpio_direction_input(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
+
+#include <asm-generic/gpio.h>	/* cansleep wrappers */
+
+extern int gpio_request(unsigned gpio, const char *tag);
+extern void gpio_free(unsigned gpio);
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return DAVINCI_N_AINTC_IRQ + gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq - DAVINCI_N_AINTC_IRQ;
+}
+
+#endif				/* __DAVINCI_GPIO_H */
diff --git a/include/asm-arm/arch-davinci/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h
similarity index 100%
rename from include/asm-arm/arch-davinci/hardware.h
rename to arch/arm/mach-davinci/include/mach/hardware.h
diff --git a/include/asm-arm/arch-davinci/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h
similarity index 100%
rename from include/asm-arm/arch-davinci/i2c.h
rename to arch/arm/mach-davinci/include/mach/i2c.h
diff --git a/include/asm-arm/arch-davinci/io.h b/arch/arm/mach-davinci/include/mach/io.h
similarity index 100%
rename from include/asm-arm/arch-davinci/io.h
rename to arch/arm/mach-davinci/include/mach/io.h
diff --git a/include/asm-arm/arch-davinci/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
similarity index 100%
rename from include/asm-arm/arch-davinci/irqs.h
rename to arch/arm/mach-davinci/include/mach/irqs.h
diff --git a/include/asm-arm/arch-davinci/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
similarity index 100%
rename from include/asm-arm/arch-davinci/memory.h
rename to arch/arm/mach-davinci/include/mach/memory.h
diff --git a/include/asm-arm/arch-davinci/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
similarity index 100%
rename from include/asm-arm/arch-davinci/mux.h
rename to arch/arm/mach-davinci/include/mach/mux.h
diff --git a/include/asm-arm/arch-davinci/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
similarity index 100%
rename from include/asm-arm/arch-davinci/psc.h
rename to arch/arm/mach-davinci/include/mach/psc.h
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
new file mode 100644
index 0000000..fb8cb22
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -0,0 +1,20 @@
+/*
+ * DaVinci serial device definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#include <mach/io.h>
+
+#define DAVINCI_UART0_BASE   (IO_PHYS + 0x20000)
+#define DAVINCI_UART1_BASE   (IO_PHYS + 0x20400)
+#define DAVINCI_UART2_BASE   (IO_PHYS + 0x20800)
+
+#endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
new file mode 100644
index 0000000..84ff77a
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/system.h
@@ -0,0 +1,29 @@
+/*
+ * DaVinci system defines
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+#include <mach/hardware.h>
+
+extern void davinci_watchdog_reset(void);
+
+static void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static void arch_reset(char mode)
+{
+	davinci_watchdog_reset();
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/include/asm-arm/arch-davinci/timex.h b/arch/arm/mach-davinci/include/mach/timex.h
similarity index 100%
rename from include/asm-arm/arch-davinci/timex.h
rename to arch/arm/mach-davinci/include/mach/timex.h
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
new file mode 100644
index 0000000..8c165de
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -0,0 +1,35 @@
+/*
+ * Serial port stubs for kernel decompress status messages
+ *
+ *  Author:     Anant Gole
+ * (C) Copyright (C) 2006, Texas Instruments, Inc
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+#include <mach/serial.h>
+
+/* PORT_16C550A, in polled non-fifo mode */
+
+static void putc(char c)
+{
+	volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+
+	while (!(uart[UART_LSR] & UART_LSR_THRE))
+		barrier();
+	uart[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+	volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+	while (!(uart[UART_LSR] & UART_LSR_THRE))
+		barrier();
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-davinci/include/mach/vmalloc.h b/arch/arm/mach-davinci/include/mach/vmalloc.h
new file mode 100644
index 0000000..b98bd9e
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/vmalloc.h
@@ -0,0 +1,15 @@
+/*
+ * DaVinci vmalloc definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <asm/memory.h>
+#include <mach/io.h>
+
+/* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
+#define VMALLOC_END	  (IO_VIRT - (2<<20))
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
index 47787ff8..5bb66b6 100644
--- a/arch/arm/mach-davinci/io.c
+++ b/arch/arm/mach-davinci/io.c
@@ -17,7 +17,7 @@
 #include <asm/memory.h>
 
 #include <asm/mach/map.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 extern void davinci_check_revision(void);
 
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index 090580e..12ca9f2 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -23,7 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/irq.h>
 
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index 439bf94..8ff9d8a 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -11,9 +11,9 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 /* System control register offsets */
 #define PINMUX0         0x00
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 753f0ba..720c48b 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -23,9 +23,9 @@
 #include <linux/init.h>
 
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/psc.h>
-#include <asm/arch/mux.h>
+#include <mach/hardware.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
 
 /* PSC register offsets */
 #define EPCPR		0x070
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index c2b812f..caf101e 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -29,9 +29,9 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/serial.h>
-#include <asm/arch/irqs.h>
+#include <mach/hardware.h>
+#include <mach/serial.h>
+#include <mach/irqs.h>
 
 #define UART_DAVINCI_PWREMU 0x0c
 
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 50c3b54..206e80d 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -17,13 +17,13 @@
 #include <linux/spinlock.h>
 
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/errno.h>
-#include <asm/arch/io.h>
+#include <mach/io.h>
 
 static struct clock_event_device clockevent_davinci;
 
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 31f4f21..65cc7c2 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -15,7 +15,7 @@
 #include <linux/serial_8250.h>
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
new file mode 100644
index 0000000..1dde822
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
@@ -0,0 +1,21 @@
+/* arch/arm/mach-ebsa110/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+**/
+
+		.macro	addruart,rx
+		mov	\rx, #0xf0000000
+		orr	\rx, \rx, #0x00000be0
+		.endm
+
+#define UART_SHIFT	2
+#define FLOW_CONTROL
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ebsa110/include/mach/dma.h b/arch/arm/mach-ebsa110/include/mach/dma.h
new file mode 100644
index 0000000..780a04c
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/dma.h
@@ -0,0 +1,11 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/dma.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  EBSA110 DMA definitions
+ */
diff --git a/arch/arm/mach-ebsa110/include/mach/entry-macro.S b/arch/arm/mach-ebsa110/include/mach/entry-macro.S
new file mode 100644
index 0000000..cc3e599
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-ebsa110/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for ebsa110 platform.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+
+
+#define IRQ_STAT		0xff000000	/* read */
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	mov	\base, #IRQ_STAT
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, stat, base, tmp
+	ldrb	\stat, [\base]			@ get interrupts
+	mov	\irqnr, #0
+	tst	\stat, #15
+	addeq	\irqnr, \irqnr, #4
+	moveq	\stat, \stat, lsr #4
+	tst	\stat, #3
+	addeq	\irqnr, \irqnr, #2
+	moveq	\stat, \stat, lsr #2
+	tst	\stat, #1
+	addeq	\irqnr, \irqnr, #1
+	moveq	\stat, \stat, lsr #1
+	tst	\stat, #1			@ bit 0 should be set
+	.endm
+
diff --git a/arch/arm/mach-ebsa110/include/mach/hardware.h b/arch/arm/mach-ebsa110/include/mach/hardware.h
new file mode 100644
index 0000000..4b2fb77
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/hardware.h
@@ -0,0 +1,63 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/hardware.h
+ *
+ *  Copyright (C) 1996-2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains the hardware definitions of the EBSA-110.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * The EBSA110 has a weird "ISA IO" region:
+ *
+ * Region 0 (addr = 0xf0000000 + io << 2)
+ * --------------------------------------------------------
+ * Physical region	IO region
+ * f0000fe0 - f0000ffc	3f8 - 3ff  ttyS0
+ * f0000e60 - f0000e64	398 - 399
+ * f0000de0 - f0000dfc	378 - 37f  lp0
+ * f0000be0 - f0000bfc	2f8 - 2ff  ttyS1
+ *
+ * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1))
+ * --------------------------------------------------------
+ * Physical region	IO region
+ * f00014f1             a79        pnp write data
+ * f00007c0 - f00007c1	3e0 - 3e1  pcmcia
+ * f00004f1		279        pnp address
+ * f0000440 - f000046c  220 - 236  eth0
+ * f0000405		203        pnp read data
+ */
+
+#define ISAMEM_PHYS		0xe0000000
+#define ISAMEM_SIZE		0x10000000
+
+#define ISAIO_PHYS		0xf0000000
+#define ISAIO_SIZE		PGDIR_SIZE
+
+#define TRICK0_PHYS		0xf2000000
+#define TRICK1_PHYS		0xf2400000
+#define TRICK2_PHYS		0xf2800000
+#define TRICK3_PHYS		0xf2c00000
+#define TRICK4_PHYS		0xf3000000
+#define TRICK5_PHYS		0xf3400000
+#define TRICK6_PHYS		0xf3800000
+#define TRICK7_PHYS		0xf3c00000
+
+#define ISAMEM_BASE		0xe0000000
+#define ISAIO_BASE		0xf0000000
+
+#define PIT_BASE		0xfc000000
+#define SOFT_BASE		0xfd000000
+
+/*
+ * RAM definitions
+ */
+#define UNCACHEABLE_ADDR	0xff000000	/* IRQ_STAT */
+
+#endif
+
diff --git a/arch/arm/mach-ebsa110/include/mach/io.h b/arch/arm/mach-ebsa110/include/mach/io.h
new file mode 100644
index 0000000..f68daa63
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/io.h
@@ -0,0 +1,92 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/io.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *  06-Dec-1997	RMK	Created.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffff
+
+u8 __inb8(unsigned int port);
+void __outb8(u8  val, unsigned int port);
+
+u8 __inb16(unsigned int port);
+void __outb16(u8  val, unsigned int port);
+
+u16 __inw(unsigned int port);
+void __outw(u16 val, unsigned int port);
+
+u32 __inl(unsigned int port);
+void __outl(u32 val, unsigned int port);
+
+u8  __readb(const volatile void __iomem *addr);
+u16 __readw(const volatile void __iomem *addr);
+u32 __readl(const volatile void __iomem *addr);
+
+void __writeb(u8  val, void __iomem *addr);
+void __writew(u16 val, void __iomem *addr);
+void __writel(u32 val, void __iomem *addr);
+
+/*
+ * Argh, someone forgot the IOCS16 line.  We therefore have to handle
+ * the byte stearing by selecting the correct byte IO functions here.
+ */
+#ifdef ISA_SIXTEEN_BIT_PERIPHERAL
+#define inb(p) 			__inb16(p)
+#define outb(v,p)		__outb16(v,p)
+#else
+#define inb(p)			__inb8(p)
+#define outb(v,p)		__outb8(v,p)
+#endif
+
+#define inw(p)			__inw(p)
+#define outw(v,p)		__outw(v,p)
+
+#define inl(p)			__inl(p)
+#define outl(v,p)		__outl(v,p)
+
+#define readb(b)		__readb(b)
+#define readw(b)		__readw(b)
+#define readl(b)		__readl(b)
+#define readb_relaxed(addr)	readb(addr)
+#define readw_relaxed(addr)	readw(addr)
+#define readl_relaxed(addr)	readl(addr)
+
+#define writeb(v,b)		__writeb(v,b)
+#define writew(v,b)		__writew(v,b)
+#define writel(v,b)		__writel(v,b)
+
+static inline void __iomem *__arch_ioremap(unsigned long cookie, size_t size,
+					   unsigned int flags)
+{
+	return (void __iomem *)cookie;
+}
+
+#define __arch_ioremap		__arch_ioremap
+#define __arch_iounmap(cookie)	do { } while (0)
+
+extern void insb(unsigned int port, void *buf, int sz);
+extern void insw(unsigned int port, void *buf, int sz);
+extern void insl(unsigned int port, void *buf, int sz);
+
+extern void outsb(unsigned int port, const void *buf, int sz);
+extern void outsw(unsigned int port, const void *buf, int sz);
+extern void outsl(unsigned int port, const void *buf, int sz);
+
+/* can't support writesb atm */
+extern void writesw(void __iomem *addr, const void *data, int wordlen);
+extern void writesl(void __iomem *addr, const void *data, int longlen);
+
+/* can't support readsb atm */
+extern void readsw(const void __iomem *addr, void *data, int wordlen);
+extern void readsl(const void __iomem *addr, void *data, int longlen);
+
+#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/irqs.h b/arch/arm/mach-ebsa110/include/mach/irqs.h
new file mode 100644
index 0000000..a8f3771
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/irqs.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/irqs.h
+ *
+ *  Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define NR_IRQS			8
+
+#define IRQ_EBSA110_PRINTER	0
+#define IRQ_EBSA110_COM1	1
+#define IRQ_EBSA110_COM2	2
+#define IRQ_EBSA110_ETHERNET	3
+#define IRQ_EBSA110_TIMER0	4
+#define IRQ_EBSA110_TIMER1	5
+#define IRQ_EBSA110_PCMCIA	6
+#define IRQ_EBSA110_IMMEDIATE	7
diff --git a/arch/arm/mach-ebsa110/include/mach/memory.h b/arch/arm/mach-ebsa110/include/mach/memory.h
new file mode 100644
index 0000000..eea4b75
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/memory.h
@@ -0,0 +1,37 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/memory.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   20-Oct-1996 RMK	Created
+ *   31-Dec-1997 RMK	Fixed definitions to reduce warnings
+ *   21-Mar-1999 RMK	Renamed to memory.h
+ *		 RMK	Moved TASK_SIZE and PAGE_OFFSET here
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+
+/*
+ * We keep this 1:1 so that we don't interfere
+ * with the PCMCIA memory regions
+ */
+#define __virt_to_bus(x)	(x)
+#define __bus_to_virt(x)	(x)
+
+/*
+ * Cache flushing area - SRAM
+ */
+#define FLUSH_BASE_PHYS		0x40000000
+#define FLUSH_BASE		0xdf000000
+
+#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h
new file mode 100644
index 0000000..350a028
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/system.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/system.h
+ *
+ *  Copyright (C) 1996-2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+/*
+ * EBSA110 idling methodology:
+ *
+ * We can not execute the "wait for interrupt" instruction since that
+ * will stop our MCLK signal (which provides the clock for the glue
+ * logic, and therefore the timer interrupt).
+ *
+ * Instead, we spin, polling the IRQ_STAT register for the occurrence
+ * of any interrupt with core clock down to the memory clock.
+ */
+static inline void arch_idle(void)
+{
+	const char *irq_stat = (char *)0xff000000;
+
+	/* disable clock switching */
+	asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
+
+	/* wait for an interrupt to occur */
+	while (!*irq_stat);
+
+	/* enable clock switching */
+	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
+}
+
+#define arch_reset(mode)	cpu_reset(0x80000000)
+
+#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/timex.h b/arch/arm/mach-ebsa110/include/mach/timex.h
new file mode 100644
index 0000000..4fb43b22a
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/timex.h
@@ -0,0 +1,19 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/timex.h
+ *
+ *  Copyright (C) 1997, 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  EBSA110 architecture timex specifications
+ */
+
+/*
+ * On the EBSA, the clock ticks at weird rates.
+ * This is therefore not used to calculate the
+ * divisor.
+ */
+#define CLOCK_TICK_RATE		47894000
+
diff --git a/arch/arm/mach-ebsa110/include/mach/uncompress.h b/arch/arm/mach-ebsa110/include/mach/uncompress.h
new file mode 100644
index 0000000..3204150
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/uncompress.h
@@ -0,0 +1,45 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_reg.h>
+
+#define SERIAL_BASE	((unsigned char *)0xf0000be0)
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	unsigned char v, *base = SERIAL_BASE;
+
+	do {
+		v = base[UART_LSR << 2];
+		barrier();
+	} while (!(v & UART_LSR_THRE));
+
+	base[UART_TX << 2] = c;
+}
+
+static inline void flush(void)
+{
+	unsigned char v, *base = SERIAL_BASE;
+
+	do {
+		v = base[UART_LSR << 2];
+		barrier();
+	} while ((v & (UART_LSR_TEMT|UART_LSR_THRE)) !=
+		 (UART_LSR_TEMT|UART_LSR_THRE));
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ebsa110/include/mach/vmalloc.h b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
new file mode 100644
index 0000000..9b44c19
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x1f000000)
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
index a2027ad..53748f5 100644
--- a/arch/arm/mach-ebsa110/io.c
+++ b/arch/arm/mach-ebsa110/io.c
@@ -24,7 +24,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/page.h>
 
diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c
index b16d016..6a6ea57 100644
--- a/arch/arm/mach-ebsa110/leds.c
+++ b/arch/arm/mach-ebsa110/leds.c
@@ -15,7 +15,7 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 8f87f8a..aa1fb35 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 4642c70..6062e47 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -16,7 +16,7 @@
 #include <linux/module.h>
 #include <linux/string.h>
 #include <asm/div64.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 struct clk {
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index b49da117..f99f436 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -36,7 +36,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
@@ -46,7 +46,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 #include <asm/hardware/vic.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9302.c b/arch/arm/mach-ep93xx/edb9302.c
index 1650ec7..97550c0 100644
--- a/arch/arm/mach-ep93xx/edb9302.c
+++ b/arch/arm/mach-ep93xx/edb9302.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9302a.c b/arch/arm/mach-ep93xx/edb9302a.c
index 00208ce..99b01d4 100644
--- a/arch/arm/mach-ep93xx/edb9302a.c
+++ b/arch/arm/mach-ep93xx/edb9302a.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9307.c b/arch/arm/mach-ep93xx/edb9307.c
index 78d04ae..9fb72d0 100644
--- a/arch/arm/mach-ep93xx/edb9307.c
+++ b/arch/arm/mach-ep93xx/edb9307.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9312.c b/arch/arm/mach-ep93xx/edb9312.c
index d658fb2..87267a5 100644
--- a/arch/arm/mach-ep93xx/edb9312.c
+++ b/arch/arm/mach-ep93xx/edb9312.c
@@ -20,7 +20,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9315.c b/arch/arm/mach-ep93xx/edb9315.c
index 4fd1cd6..7e37395 100644
--- a/arch/arm/mach-ep93xx/edb9315.c
+++ b/arch/arm/mach-ep93xx/edb9315.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c
index 44dacba..08a7c9b 100644
--- a/arch/arm/mach-ep93xx/edb9315a.c
+++ b/arch/arm/mach-ep93xx/edb9315a.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index cc80031..9b41ec1 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index dc2e4c0..0f3fb87c 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -17,7 +17,7 @@
 #include <linux/module.h>
 #include <linux/seq_file.h>
 
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
 #include <asm/io.h>
 #include <asm/gpio.h>
 
diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
new file mode 100644
index 0000000..802858b
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/debug-macro.S
+ * Debugging macro include header
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <mach/ep93xx-regs.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1				@ MMU enabled?
+		ldreq	\rx, =EP93XX_APB_PHYS_BASE	@ Physical base
+		ldrne	\rx, =EP93XX_APB_VIRT_BASE	@ virtual base
+		orr	\rx, \rx, #0x000c0000
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
new file mode 100644
index 0000000..d0fa965
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/dma.h
+ */
diff --git a/arch/arm/mach-ep93xx/include/mach/entry-macro.S b/arch/arm/mach-ep93xx/include/mach/entry-macro.S
new file mode 100644
index 0000000..96b85e2
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/entry-macro.S
@@ -0,0 +1,59 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/entry-macro.S
+ * IRQ demultiplexing for EP93xx
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <mach/ep93xx-regs.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =(EP93XX_AHB_VIRT_BASE)
+		orr	\base, \base, #0x000b0000
+		mov	\irqnr, #0
+		ldr	\irqstat, [\base]		@ lower 32 interrupts
+		cmp	\irqstat, #0
+		bne	1001f
+
+		eor	\base, \base, #0x00070000
+		ldr	\irqstat, [\base]		@ upper 32 interrupts
+		cmp	\irqstat, #0
+		beq	1002f
+		mov	\irqnr, #0x20
+
+1001:
+		movs	\tmp, \irqstat, lsl #16
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #16
+
+		movs	\tmp, \irqstat, lsl #8
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #8
+
+		movs	\tmp, \irqstat, lsl #4
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #4
+
+		movs	\tmp, \irqstat, lsl #2
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #2
+
+		movs	\tmp, \irqstat, lsl #1
+		addeq	\irqnr, \irqnr, #1
+		orrs	\base, \base, #1
+
+1002:
+		.endm
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
new file mode 100644
index 0000000..9f4458c
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -0,0 +1,133 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+ */
+
+#ifndef __ASM_ARCH_EP93XX_REGS_H
+#define __ASM_ARCH_EP93XX_REGS_H
+
+/*
+ * EP93xx linux memory map:
+ *
+ * virt		phys		size
+ * fe800000			5M		per-platform mappings
+ * fed00000	80800000	2M		APB
+ * fef00000	80000000	1M		AHB
+ */
+
+#define EP93XX_AHB_PHYS_BASE		0x80000000
+#define EP93XX_AHB_VIRT_BASE		0xfef00000
+#define EP93XX_AHB_SIZE			0x00100000
+
+#define EP93XX_APB_PHYS_BASE		0x80800000
+#define EP93XX_APB_VIRT_BASE		0xfed00000
+#define EP93XX_APB_SIZE			0x00200000
+
+
+/* AHB peripherals */
+#define EP93XX_DMA_BASE			(EP93XX_AHB_VIRT_BASE + 0x00000000)
+
+#define EP93XX_ETHERNET_BASE		(EP93XX_AHB_VIRT_BASE + 0x00010000)
+#define EP93XX_ETHERNET_PHYS_BASE	(EP93XX_AHB_PHYS_BASE + 0x00010000)
+
+#define EP93XX_USB_BASE			(EP93XX_AHB_VIRT_BASE + 0x00020000)
+#define EP93XX_USB_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00020000)
+
+#define EP93XX_RASTER_BASE		(EP93XX_AHB_VIRT_BASE + 0x00030000)
+
+#define EP93XX_GRAPHICS_ACCEL_BASE	(EP93XX_AHB_VIRT_BASE + 0x00040000)
+
+#define EP93XX_SDRAM_CONTROLLER_BASE	(EP93XX_AHB_VIRT_BASE + 0x00060000)
+
+#define EP93XX_PCMCIA_CONTROLLER_BASE	(EP93XX_AHB_VIRT_BASE + 0x00080000)
+
+#define EP93XX_BOOT_ROM_BASE		(EP93XX_AHB_VIRT_BASE + 0x00090000)
+
+#define EP93XX_IDE_BASE			(EP93XX_AHB_VIRT_BASE + 0x000a0000)
+
+#define EP93XX_VIC1_BASE		(EP93XX_AHB_VIRT_BASE + 0x000b0000)
+
+#define EP93XX_VIC2_BASE		(EP93XX_AHB_VIRT_BASE + 0x000c0000)
+
+
+/* APB peripherals */
+#define EP93XX_TIMER_BASE		(EP93XX_APB_VIRT_BASE + 0x00010000)
+#define EP93XX_TIMER_REG(x)		(EP93XX_TIMER_BASE + (x))
+#define EP93XX_TIMER1_LOAD		EP93XX_TIMER_REG(0x00)
+#define EP93XX_TIMER1_VALUE		EP93XX_TIMER_REG(0x04)
+#define EP93XX_TIMER1_CONTROL		EP93XX_TIMER_REG(0x08)
+#define EP93XX_TIMER1_CLEAR		EP93XX_TIMER_REG(0x0c)
+#define EP93XX_TIMER2_LOAD		EP93XX_TIMER_REG(0x20)
+#define EP93XX_TIMER2_VALUE		EP93XX_TIMER_REG(0x24)
+#define EP93XX_TIMER2_CONTROL		EP93XX_TIMER_REG(0x28)
+#define EP93XX_TIMER2_CLEAR		EP93XX_TIMER_REG(0x2c)
+#define EP93XX_TIMER4_VALUE_LOW		EP93XX_TIMER_REG(0x60)
+#define EP93XX_TIMER4_VALUE_HIGH	EP93XX_TIMER_REG(0x64)
+#define EP93XX_TIMER3_LOAD		EP93XX_TIMER_REG(0x80)
+#define EP93XX_TIMER3_VALUE		EP93XX_TIMER_REG(0x84)
+#define EP93XX_TIMER3_CONTROL		EP93XX_TIMER_REG(0x88)
+#define EP93XX_TIMER3_CLEAR		EP93XX_TIMER_REG(0x8c)
+
+#define EP93XX_I2S_BASE			(EP93XX_APB_VIRT_BASE + 0x00020000)
+
+#define EP93XX_SECURITY_BASE		(EP93XX_APB_VIRT_BASE + 0x00030000)
+
+#define EP93XX_GPIO_BASE		(EP93XX_APB_VIRT_BASE + 0x00040000)
+#define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
+#define EP93XX_GPIO_F_INT_TYPE1		EP93XX_GPIO_REG(0x4c)
+#define EP93XX_GPIO_F_INT_TYPE2		EP93XX_GPIO_REG(0x50)
+#define EP93XX_GPIO_F_INT_ACK		EP93XX_GPIO_REG(0x54)
+#define EP93XX_GPIO_F_INT_ENABLE	EP93XX_GPIO_REG(0x58)
+#define EP93XX_GPIO_F_INT_STATUS	EP93XX_GPIO_REG(0x5c)
+#define EP93XX_GPIO_A_INT_TYPE1		EP93XX_GPIO_REG(0x90)
+#define EP93XX_GPIO_A_INT_TYPE2		EP93XX_GPIO_REG(0x94)
+#define EP93XX_GPIO_A_INT_ACK		EP93XX_GPIO_REG(0x98)
+#define EP93XX_GPIO_A_INT_ENABLE	EP93XX_GPIO_REG(0x9c)
+#define EP93XX_GPIO_A_INT_STATUS	EP93XX_GPIO_REG(0xa0)
+#define EP93XX_GPIO_B_INT_TYPE1		EP93XX_GPIO_REG(0xac)
+#define EP93XX_GPIO_B_INT_TYPE2		EP93XX_GPIO_REG(0xb0)
+#define EP93XX_GPIO_B_INT_ACK		EP93XX_GPIO_REG(0xb4)
+#define EP93XX_GPIO_B_INT_ENABLE	EP93XX_GPIO_REG(0xb8)
+#define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
+
+#define EP93XX_AAC_BASE			(EP93XX_APB_VIRT_BASE + 0x00080000)
+
+#define EP93XX_SPI_BASE			(EP93XX_APB_VIRT_BASE + 0x000a0000)
+
+#define EP93XX_IRDA_BASE		(EP93XX_APB_VIRT_BASE + 0x000b0000)
+
+#define EP93XX_UART1_BASE		(EP93XX_APB_VIRT_BASE + 0x000c0000)
+#define EP93XX_UART1_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000c0000)
+
+#define EP93XX_UART2_BASE		(EP93XX_APB_VIRT_BASE + 0x000d0000)
+#define EP93XX_UART2_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000d0000)
+
+#define EP93XX_UART3_BASE		(EP93XX_APB_VIRT_BASE + 0x000e0000)
+#define EP93XX_UART3_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000e0000)
+
+#define EP93XX_KEY_MATRIX_BASE		(EP93XX_APB_VIRT_BASE + 0x000f0000)
+
+#define EP93XX_ADC_BASE			(EP93XX_APB_VIRT_BASE + 0x00100000)
+#define EP93XX_TOUCHSCREEN_BASE		(EP93XX_APB_VIRT_BASE + 0x00100000)
+
+#define EP93XX_PWM_BASE			(EP93XX_APB_VIRT_BASE + 0x00110000)
+
+#define EP93XX_RTC_BASE			(EP93XX_APB_VIRT_BASE + 0x00120000)
+
+#define EP93XX_SYSCON_BASE		(EP93XX_APB_VIRT_BASE + 0x00130000)
+#define EP93XX_SYSCON_REG(x)		(EP93XX_SYSCON_BASE + (x))
+#define EP93XX_SYSCON_POWER_STATE	EP93XX_SYSCON_REG(0x00)
+#define EP93XX_SYSCON_CLOCK_CONTROL	EP93XX_SYSCON_REG(0x04)
+#define EP93XX_SYSCON_CLOCK_UARTBAUD	0x20000000
+#define EP93XX_SYSCON_CLOCK_USH_EN	0x10000000
+#define EP93XX_SYSCON_HALT		EP93XX_SYSCON_REG(0x08)
+#define EP93XX_SYSCON_STANDBY		EP93XX_SYSCON_REG(0x0c)
+#define EP93XX_SYSCON_CLOCK_SET1	EP93XX_SYSCON_REG(0x20)
+#define EP93XX_SYSCON_CLOCK_SET2	EP93XX_SYSCON_REG(0x24)
+#define EP93XX_SYSCON_DEVICE_CONFIG	EP93XX_SYSCON_REG(0x80)
+#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE	0x00800000
+#define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
+
+#define EP93XX_WATCHDOG_BASE		(EP93XX_APB_VIRT_BASE + 0x00140000)
+
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/gesbc9312.h b/arch/arm/mach-ep93xx/include/mach/gesbc9312.h
new file mode 100644
index 0000000..21fe2b9
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/gesbc9312.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/gesbc9312.h
+ */
diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h
new file mode 100644
index 0000000..f702041
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/gpio.h
@@ -0,0 +1,128 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/gpio.h
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+/* GPIO port A.  */
+#define EP93XX_GPIO_LINE_A(x)		((x) + 0)
+#define EP93XX_GPIO_LINE_EGPIO0		EP93XX_GPIO_LINE_A(0)
+#define EP93XX_GPIO_LINE_EGPIO1		EP93XX_GPIO_LINE_A(1)
+#define EP93XX_GPIO_LINE_EGPIO2		EP93XX_GPIO_LINE_A(2)
+#define EP93XX_GPIO_LINE_EGPIO3		EP93XX_GPIO_LINE_A(3)
+#define EP93XX_GPIO_LINE_EGPIO4		EP93XX_GPIO_LINE_A(4)
+#define EP93XX_GPIO_LINE_EGPIO5		EP93XX_GPIO_LINE_A(5)
+#define EP93XX_GPIO_LINE_EGPIO6		EP93XX_GPIO_LINE_A(6)
+#define EP93XX_GPIO_LINE_EGPIO7		EP93XX_GPIO_LINE_A(7)
+
+/* GPIO port B.  */
+#define EP93XX_GPIO_LINE_B(x)		((x) + 8)
+#define EP93XX_GPIO_LINE_EGPIO8		EP93XX_GPIO_LINE_B(0)
+#define EP93XX_GPIO_LINE_EGPIO9		EP93XX_GPIO_LINE_B(1)
+#define EP93XX_GPIO_LINE_EGPIO10	EP93XX_GPIO_LINE_B(2)
+#define EP93XX_GPIO_LINE_EGPIO11	EP93XX_GPIO_LINE_B(3)
+#define EP93XX_GPIO_LINE_EGPIO12	EP93XX_GPIO_LINE_B(4)
+#define EP93XX_GPIO_LINE_EGPIO13	EP93XX_GPIO_LINE_B(5)
+#define EP93XX_GPIO_LINE_EGPIO14	EP93XX_GPIO_LINE_B(6)
+#define EP93XX_GPIO_LINE_EGPIO15	EP93XX_GPIO_LINE_B(7)
+
+/* GPIO port C.  */
+#define EP93XX_GPIO_LINE_C(x)		((x) + 40)
+#define EP93XX_GPIO_LINE_ROW0		EP93XX_GPIO_LINE_C(0)
+#define EP93XX_GPIO_LINE_ROW1		EP93XX_GPIO_LINE_C(1)
+#define EP93XX_GPIO_LINE_ROW2		EP93XX_GPIO_LINE_C(2)
+#define EP93XX_GPIO_LINE_ROW3		EP93XX_GPIO_LINE_C(3)
+#define EP93XX_GPIO_LINE_ROW4		EP93XX_GPIO_LINE_C(4)
+#define EP93XX_GPIO_LINE_ROW5		EP93XX_GPIO_LINE_C(5)
+#define EP93XX_GPIO_LINE_ROW6		EP93XX_GPIO_LINE_C(6)
+#define EP93XX_GPIO_LINE_ROW7		EP93XX_GPIO_LINE_C(7)
+
+/* GPIO port D.  */
+#define EP93XX_GPIO_LINE_D(x)		((x) + 24)
+#define EP93XX_GPIO_LINE_COL0		EP93XX_GPIO_LINE_D(0)
+#define EP93XX_GPIO_LINE_COL1		EP93XX_GPIO_LINE_D(1)
+#define EP93XX_GPIO_LINE_COL2		EP93XX_GPIO_LINE_D(2)
+#define EP93XX_GPIO_LINE_COL3		EP93XX_GPIO_LINE_D(3)
+#define EP93XX_GPIO_LINE_COL4		EP93XX_GPIO_LINE_D(4)
+#define EP93XX_GPIO_LINE_COL5		EP93XX_GPIO_LINE_D(5)
+#define EP93XX_GPIO_LINE_COL6		EP93XX_GPIO_LINE_D(6)
+#define EP93XX_GPIO_LINE_COL7		EP93XX_GPIO_LINE_D(7)
+
+/* GPIO port E.  */
+#define EP93XX_GPIO_LINE_E(x)		((x) + 32)
+#define EP93XX_GPIO_LINE_GRLED		EP93XX_GPIO_LINE_E(0)
+#define EP93XX_GPIO_LINE_RDLED		EP93XX_GPIO_LINE_E(1)
+#define EP93XX_GPIO_LINE_DIORn		EP93XX_GPIO_LINE_E(2)
+#define EP93XX_GPIO_LINE_IDECS1n	EP93XX_GPIO_LINE_E(3)
+#define EP93XX_GPIO_LINE_IDECS2n	EP93XX_GPIO_LINE_E(4)
+#define EP93XX_GPIO_LINE_IDEDA0		EP93XX_GPIO_LINE_E(5)
+#define EP93XX_GPIO_LINE_IDEDA1		EP93XX_GPIO_LINE_E(6)
+#define EP93XX_GPIO_LINE_IDEDA2		EP93XX_GPIO_LINE_E(7)
+
+/* GPIO port F.  */
+#define EP93XX_GPIO_LINE_F(x)		((x) + 16)
+#define EP93XX_GPIO_LINE_WP		EP93XX_GPIO_LINE_F(0)
+#define EP93XX_GPIO_LINE_MCCD1		EP93XX_GPIO_LINE_F(1)
+#define EP93XX_GPIO_LINE_MCCD2		EP93XX_GPIO_LINE_F(2)
+#define EP93XX_GPIO_LINE_MCBVD1		EP93XX_GPIO_LINE_F(3)
+#define EP93XX_GPIO_LINE_MCBVD2		EP93XX_GPIO_LINE_F(4)
+#define EP93XX_GPIO_LINE_VS1		EP93XX_GPIO_LINE_F(5)
+#define EP93XX_GPIO_LINE_READY		EP93XX_GPIO_LINE_F(6)
+#define EP93XX_GPIO_LINE_VS2		EP93XX_GPIO_LINE_F(7)
+
+/* GPIO port G.  */
+#define EP93XX_GPIO_LINE_G(x)		((x) + 48)
+#define EP93XX_GPIO_LINE_EECLK		EP93XX_GPIO_LINE_G(0)
+#define EP93XX_GPIO_LINE_EEDAT		EP93XX_GPIO_LINE_G(1)
+#define EP93XX_GPIO_LINE_SLA0		EP93XX_GPIO_LINE_G(2)
+#define EP93XX_GPIO_LINE_SLA1		EP93XX_GPIO_LINE_G(3)
+#define EP93XX_GPIO_LINE_DD12		EP93XX_GPIO_LINE_G(4)
+#define EP93XX_GPIO_LINE_DD13		EP93XX_GPIO_LINE_G(5)
+#define EP93XX_GPIO_LINE_DD14		EP93XX_GPIO_LINE_G(6)
+#define EP93XX_GPIO_LINE_DD15		EP93XX_GPIO_LINE_G(7)
+
+/* GPIO port H.  */
+#define EP93XX_GPIO_LINE_H(x)		((x) + 56)
+#define EP93XX_GPIO_LINE_DD0		EP93XX_GPIO_LINE_H(0)
+#define EP93XX_GPIO_LINE_DD1		EP93XX_GPIO_LINE_H(1)
+#define EP93XX_GPIO_LINE_DD2		EP93XX_GPIO_LINE_H(2)
+#define EP93XX_GPIO_LINE_DD3		EP93XX_GPIO_LINE_H(3)
+#define EP93XX_GPIO_LINE_DD4		EP93XX_GPIO_LINE_H(4)
+#define EP93XX_GPIO_LINE_DD5		EP93XX_GPIO_LINE_H(5)
+#define EP93XX_GPIO_LINE_DD6		EP93XX_GPIO_LINE_H(6)
+#define EP93XX_GPIO_LINE_DD7		EP93XX_GPIO_LINE_H(7)
+
+/* maximum value for gpio line identifiers */
+#define EP93XX_GPIO_LINE_MAX		EP93XX_GPIO_LINE_H(7)
+
+/* maximum value for irq capable line identifiers */
+#define EP93XX_GPIO_LINE_MAX_IRQ	EP93XX_GPIO_LINE_F(7)
+
+/* new generic GPIO API - see Documentation/gpio.txt */
+
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+
+/*
+ * Map GPIO A0..A7  (0..7)  to irq 64..71,
+ *          B0..B7  (7..15) to irq 72..79, and
+ *          F0..F7 (16..24) to irq 80..87.
+ */
+static inline int gpio_to_irq(unsigned gpio)
+{
+	if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
+		return 64 + gpio;
+
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq - gpio_to_irq(0);
+}
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
new file mode 100644
index 0000000..529807d
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/hardware.h
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "ep93xx-regs.h"
+
+#define pcibios_assign_all_busses()	0
+
+#include "platform.h"
+
+#include "gesbc9312.h"
+#include "ts72xx.h"
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h
new file mode 100644
index 0000000..1ab9a90
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/io.h
@@ -0,0 +1,8 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/io.h
+ */
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+#define __io(p)			((void __iomem *)(p))
+#define __mem_pci(p)		(p)
diff --git a/arch/arm/mach-ep93xx/include/mach/irqs.h b/arch/arm/mach-ep93xx/include/mach/irqs.h
new file mode 100644
index 0000000..ff98390
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/irqs.h
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/irqs.h
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define IRQ_EP93XX_COMMRX		2
+#define IRQ_EP93XX_COMMTX		3
+#define IRQ_EP93XX_TIMER1		4
+#define IRQ_EP93XX_TIMER2		5
+#define IRQ_EP93XX_AACINTR		6
+#define IRQ_EP93XX_DMAM2P0		7
+#define IRQ_EP93XX_DMAM2P1		8
+#define IRQ_EP93XX_DMAM2P2		9
+#define IRQ_EP93XX_DMAM2P3		10
+#define IRQ_EP93XX_DMAM2P4		11
+#define IRQ_EP93XX_DMAM2P5		12
+#define IRQ_EP93XX_DMAM2P6		13
+#define IRQ_EP93XX_DMAM2P7		14
+#define IRQ_EP93XX_DMAM2P8		15
+#define IRQ_EP93XX_DMAM2P9		16
+#define IRQ_EP93XX_DMAM2M0		17
+#define IRQ_EP93XX_DMAM2M1		18
+#define IRQ_EP93XX_GPIO0MUX		19
+#define IRQ_EP93XX_GPIO1MUX		20
+#define IRQ_EP93XX_GPIO2MUX		21
+#define IRQ_EP93XX_GPIO3MUX		22
+#define IRQ_EP93XX_UART1RX		23
+#define IRQ_EP93XX_UART1TX		24
+#define IRQ_EP93XX_UART2RX		25
+#define IRQ_EP93XX_UART2TX		26
+#define IRQ_EP93XX_UART3RX		27
+#define IRQ_EP93XX_UART3TX		28
+#define IRQ_EP93XX_KEY			29
+#define IRQ_EP93XX_TOUCH		30
+#define EP93XX_VIC1_VALID_IRQ_MASK	0x7ffffffc
+
+#define IRQ_EP93XX_EXT0			32
+#define IRQ_EP93XX_EXT1			33
+#define IRQ_EP93XX_EXT2			34
+#define IRQ_EP93XX_64HZ			35
+#define IRQ_EP93XX_WATCHDOG		36
+#define IRQ_EP93XX_RTC			37
+#define IRQ_EP93XX_IRDA			38
+#define IRQ_EP93XX_ETHERNET		39
+#define IRQ_EP93XX_EXT3			40
+#define IRQ_EP93XX_PROG			41
+#define IRQ_EP93XX_1HZ			42
+#define IRQ_EP93XX_VSYNC		43
+#define IRQ_EP93XX_VIDEO_FIFO		44
+#define IRQ_EP93XX_SSP1RX		45
+#define IRQ_EP93XX_SSP1TX		46
+#define IRQ_EP93XX_GPIO4MUX		47
+#define IRQ_EP93XX_GPIO5MUX		48
+#define IRQ_EP93XX_GPIO6MUX		49
+#define IRQ_EP93XX_GPIO7MUX		50
+#define IRQ_EP93XX_TIMER3		51
+#define IRQ_EP93XX_UART1		52
+#define IRQ_EP93XX_SSP			53
+#define IRQ_EP93XX_UART2		54
+#define IRQ_EP93XX_UART3		55
+#define IRQ_EP93XX_USB			56
+#define IRQ_EP93XX_ETHERNET_PME		57
+#define IRQ_EP93XX_DSP			58
+#define IRQ_EP93XX_GPIO_AB		59
+#define IRQ_EP93XX_SAI			60
+#define EP93XX_VIC2_VALID_IRQ_MASK	0x1fffffff
+
+#define NR_EP93XX_IRQS			(64 + 24)
+
+#define EP93XX_BOARD_IRQ(x)		(NR_EP93XX_IRQS + (x))
+#define EP93XX_BOARD_IRQS		32
+
+#define NR_IRQS				(NR_EP93XX_IRQS + EP93XX_BOARD_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
new file mode 100644
index 0000000..f1b6335
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x00000000)
+
+#define __bus_to_virt(x)	__phys_to_virt(x)
+#define __virt_to_bus(x)	__virt_to_phys(x)
+
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
new file mode 100644
index 0000000..b5c1824
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/platform.h
+ */
+
+#ifndef __ASSEMBLY__
+
+void ep93xx_map_io(void);
+void ep93xx_init_irq(void);
+void ep93xx_init_time(unsigned long);
+void ep93xx_init_devices(void);
+extern struct sys_timer ep93xx_timer;
+
+struct ep93xx_eth_data
+{
+	unsigned char	dev_addr[6];
+	unsigned char	phy_id;
+};
+
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
new file mode 100644
index 0000000..67789d0
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/system.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/system.h
+ */
+
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	u32 devicecfg;
+
+	local_irq_disable();
+
+	devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
+	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+	__raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
+	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+	__raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
+
+	while (1)
+		;
+}
diff --git a/arch/arm/mach-ep93xx/include/mach/timex.h b/arch/arm/mach-ep93xx/include/mach/timex.h
new file mode 100644
index 0000000..6b3503b
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/timex.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/timex.h
+ */
+
+#define CLOCK_TICK_RATE		983040
diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
new file mode 100644
index 0000000..30b318a
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -0,0 +1,101 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/ts72xx.h
+ */
+
+/*
+ * TS72xx memory map:
+ *
+ * virt		phys		size
+ * febff000	22000000	4K	model number register
+ * febfe000	22400000	4K	options register
+ * febfd000	22800000	4K	options register #2
+ * febfc000	[67]0000000	4K	NAND data register
+ * febfb000	[67]0400000	4K	NAND control register
+ * febfa000	[67]0800000	4K	NAND busy register
+ * febf9000	10800000	4K	TS-5620 RTC index register
+ * febf8000	11700000	4K	TS-5620 RTC data register
+ */
+
+#define TS72XX_MODEL_PHYS_BASE		0x22000000
+#define TS72XX_MODEL_VIRT_BASE		0xfebff000
+#define TS72XX_MODEL_SIZE		0x00001000
+
+#define TS72XX_MODEL_TS7200		0x00
+#define TS72XX_MODEL_TS7250		0x01
+#define TS72XX_MODEL_TS7260		0x02
+
+
+#define TS72XX_OPTIONS_PHYS_BASE	0x22400000
+#define TS72XX_OPTIONS_VIRT_BASE	0xfebfe000
+#define TS72XX_OPTIONS_SIZE		0x00001000
+
+#define TS72XX_OPTIONS_COM2_RS485	0x02
+#define TS72XX_OPTIONS_MAX197		0x01
+
+
+#define TS72XX_OPTIONS2_PHYS_BASE	0x22800000
+#define TS72XX_OPTIONS2_VIRT_BASE	0xfebfd000
+#define TS72XX_OPTIONS2_SIZE		0x00001000
+
+#define TS72XX_OPTIONS2_TS9420		0x04
+#define TS72XX_OPTIONS2_TS9420_BOOT	0x02
+
+
+#define TS72XX_NOR_PHYS_BASE		0x60000000
+#define TS72XX_NOR2_PHYS_BASE		0x62000000
+
+#define TS72XX_NAND1_DATA_PHYS_BASE	0x60000000
+#define TS72XX_NAND2_DATA_PHYS_BASE	0x70000000
+#define TS72XX_NAND_DATA_VIRT_BASE	0xfebfc000
+#define TS72XX_NAND_DATA_SIZE		0x00001000
+
+#define TS72XX_NAND1_CONTROL_PHYS_BASE	0x60400000
+#define TS72XX_NAND2_CONTROL_PHYS_BASE	0x70400000
+#define TS72XX_NAND_CONTROL_VIRT_BASE	0xfebfb000
+#define TS72XX_NAND_CONTROL_SIZE	0x00001000
+
+#define TS72XX_NAND1_BUSY_PHYS_BASE	0x60800000
+#define TS72XX_NAND2_BUSY_PHYS_BASE	0x70800000
+#define TS72XX_NAND_BUSY_VIRT_BASE	0xfebfa000
+#define TS72XX_NAND_BUSY_SIZE		0x00001000
+
+
+#define TS72XX_RTC_INDEX_VIRT_BASE	0xfebf9000
+#define TS72XX_RTC_INDEX_PHYS_BASE	0x10800000
+#define TS72XX_RTC_INDEX_SIZE		0x00001000
+
+#define TS72XX_RTC_DATA_VIRT_BASE	0xfebf8000
+#define TS72XX_RTC_DATA_PHYS_BASE	0x11700000
+#define TS72XX_RTC_DATA_SIZE		0x00001000
+
+
+#ifndef __ASSEMBLY__
+#include <asm/io.h>
+
+static inline int board_is_ts7200(void)
+{
+	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200;
+}
+
+static inline int board_is_ts7250(void)
+{
+	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250;
+}
+
+static inline int board_is_ts7260(void)
+{
+	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260;
+}
+
+static inline int is_max197_installed(void)
+{
+	return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
+					TS72XX_OPTIONS_MAX197);
+}
+
+static inline int is_ts9420_installed(void)
+{
+	return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) &
+					TS72XX_OPTIONS2_TS9420);
+}
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h
new file mode 100644
index 0000000..1fd2f17
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h
@@ -0,0 +1,85 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/uncompress.h
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <mach/ep93xx-regs.h>
+
+static unsigned char __raw_readb(unsigned int ptr)
+{
+	return *((volatile unsigned char *)ptr);
+}
+
+static unsigned int __raw_readl(unsigned int ptr)
+{
+	return *((volatile unsigned int *)ptr);
+}
+
+static void __raw_writeb(unsigned char value, unsigned int ptr)
+{
+	*((volatile unsigned char *)ptr) = value;
+}
+
+static void __raw_writel(unsigned int value, unsigned int ptr)
+{
+	*((volatile unsigned int *)ptr) = value;
+}
+
+
+#define PHYS_UART1_DATA		0x808c0000
+#define PHYS_UART1_FLAG		0x808c0018
+#define UART1_FLAG_TXFF		0x20
+
+static inline void putc(int c)
+{
+	int i;
+
+	for (i = 0; i < 1000; i++) {
+		/* Transmit fifo not full?  */
+		if (!(__raw_readb(PHYS_UART1_FLAG) & UART1_FLAG_TXFF))
+			break;
+	}
+
+	__raw_writeb(c, PHYS_UART1_DATA);
+}
+
+static inline void flush(void)
+{
+}
+
+
+/*
+ * Some bootloaders don't turn off DMA from the ethernet MAC before
+ * jumping to linux, which means that we might end up with bits of RX
+ * status and packet data scribbled over the uncompressed kernel image.
+ * Work around this by resetting the ethernet MAC before we uncompress.
+ */
+#define PHYS_ETH_SELF_CTL		0x80010020
+#define ETH_SELF_CTL_RESET		0x00000001
+
+static void ethernet_reset(void)
+{
+	unsigned int v;
+
+	/* Reset the ethernet MAC.  */
+	v = __raw_readl(PHYS_ETH_SELF_CTL);
+	__raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL);
+
+	/* Wait for reset to finish.  */
+	while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET)
+		;
+}
+
+
+static void arch_decomp_setup(void)
+{
+	ethernet_reset();
+}
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ep93xx/include/mach/vmalloc.h b/arch/arm/mach-ep93xx/include/mach/vmalloc.h
new file mode 100644
index 0000000..aed21cd
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe800000
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 4d831ba..de047a5 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -20,7 +20,7 @@
 #include <linux/mtd/physmap.h>
 
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index c0bc642..c3cbff1 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -20,7 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/m48t86.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-footbridge/ebsa285-leds.c b/arch/arm/mach-footbridge/ebsa285-leds.c
index c04c46c..4e10090 100644
--- a/arch/arm/mach-footbridge/ebsa285-leds.c
+++ b/arch/arm/mach-footbridge/ebsa285-leds.c
@@ -21,7 +21,7 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
new file mode 100644
index 0000000..4329b81
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -0,0 +1,57 @@
+/* arch/arm/mach-footbridge/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <asm/hardware/dec21285.h>
+
+#ifndef CONFIG_DEBUG_DC21285_PORT
+	/* For NetWinder debugging */
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x7c000000	@ physical
+		movne	\rx, #0xff000000	@ virtual
+		orr	\rx, \rx, #0x000003f8
+		.endm
+
+#define UART_SHIFT	0
+#define FLOW_CONTROL
+#include <asm/hardware/debug-8250.S>
+
+#else
+	/* For EBSA285 debugging */
+		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
+		.equ	dc21285_low,  ARMCSR_BASE & 0x00ffffff
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x42000000
+		movne	\rx, #dc21285_high
+		.if	dc21285_low
+		orrne	\rx, \rx, #dc21285_low
+		.endif
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x160]	@ UARTDR
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #0x178]	@ UARTFLG
+		tst	\rd, #1 << 3
+		bne	1001b
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+#endif
diff --git a/arch/arm/mach-footbridge/include/mach/dma.h b/arch/arm/mach-footbridge/include/mach/dma.h
new file mode 100644
index 0000000..62afd21
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/dma.h
@@ -0,0 +1,25 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/dma.h
+ *
+ *  Architecture DMA routines
+ *
+ *  Copyright (C) 1998,1999 Russell King
+ *  Copyright (C) 1998,1999 Philip Blundell
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * The 21285 has two internal DMA channels; we call these 8 and 9.
+ * On CATS hardware we have an additional eight ISA dma channels
+ * numbered 0..7.
+ */
+#define _ISA_DMA(x)		(0+(x))
+#define _DC21285_DMA(x)		(8+(x))
+
+#define MAX_DMA_CHANNELS	10
+
+#define DMA_FLOPPY		_ISA_DMA(2)
+#define DMA_ISA_CASCADE		_ISA_DMA(4)
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-footbridge/include/mach/entry-macro.S b/arch/arm/mach-footbridge/include/mach/entry-macro.S
new file mode 100644
index 0000000..d3847be
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/entry-macro.S
@@ -0,0 +1,113 @@
+/*
+ * arch/arm/mach-footbridge/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for footbridge-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/hardware/dec21285.h>
+
+		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
+		.equ	dc21285_low, ARMCSR_BASE & 0x00ffffff
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		mov	\base, #dc21285_high
+		.if	dc21285_low
+		orr	\base, \base, #dc21285_low
+		.endif
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, [\base, #0x180]	@ get interrupts
+
+		mov	\irqnr, #IRQ_SDRAMPARITY
+		tst	\irqstat, #IRQ_MASK_SDRAMPARITY
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_UART_RX
+		movne	\irqnr, #IRQ_CONRX
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_DMA1
+		movne	\irqnr, #IRQ_DMA1
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_DMA2
+		movne	\irqnr, #IRQ_DMA2
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_IN0
+		movne	\irqnr, #IRQ_IN0
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_IN1
+		movne	\irqnr, #IRQ_IN1
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_IN2
+		movne	\irqnr, #IRQ_IN2
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_IN3
+		movne	\irqnr, #IRQ_IN3
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI
+		movne	\irqnr, #IRQ_PCI
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_DOORBELLHOST
+		movne	\irqnr, #IRQ_DOORBELLHOST
+		bne     1001f
+
+		tst	\irqstat, #IRQ_MASK_I2OINPOST
+		movne	\irqnr, #IRQ_I2OINPOST
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_TIMER1
+		movne	\irqnr, #IRQ_TIMER1
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_TIMER2
+		movne	\irqnr, #IRQ_TIMER2
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_TIMER3
+		movne	\irqnr, #IRQ_TIMER3
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_UART_TX
+		movne	\irqnr, #IRQ_CONTX
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI_ABORT
+		movne	\irqnr, #IRQ_PCI_ABORT
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI_SERR
+		movne	\irqnr, #IRQ_PCI_SERR
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_DISCARD_TIMER
+		movne	\irqnr, #IRQ_DISCARD_TIMER
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI_DPERR
+		movne	\irqnr, #IRQ_PCI_DPERR
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI_PERR
+		movne	\irqnr, #IRQ_PCI_PERR
+1001:
+		.endm
+
diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h
new file mode 100644
index 0000000..ffaea90
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/hardware.h
@@ -0,0 +1,105 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/hardware.h
+ *
+ *  Copyright (C) 1998-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains the hardware definitions of the EBSA-285.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/memory.h>
+
+/*   Virtual      Physical	Size
+ * 0xff800000	0x40000000	1MB	X-Bus
+ * 0xff000000	0x7c000000	1MB	PCI I/O space
+ * 0xfe000000	0x42000000	1MB	CSR
+ * 0xfd000000	0x78000000	1MB	Outbound write flush (not supported)
+ * 0xfc000000	0x79000000	1MB	PCI IACK/special space
+ * 0xfb000000	0x7a000000	16MB	PCI Config type 1
+ * 0xfa000000	0x7b000000	16MB	PCI Config type 0
+ * 0xf9000000	0x50000000	1MB	Cache flush
+ * 0xf0000000	0x80000000	16MB	ISA memory
+ */
+#define XBUS_SIZE		0x00100000
+#define XBUS_BASE		0xff800000
+
+#define PCIO_SIZE		0x00100000
+#define PCIO_BASE		0xff000000
+
+#define ARMCSR_SIZE		0x00100000
+#define ARMCSR_BASE		0xfe000000
+
+#define WFLUSH_SIZE		0x00100000
+#define WFLUSH_BASE		0xfd000000
+
+#define PCIIACK_SIZE		0x00100000
+#define PCIIACK_BASE		0xfc000000
+
+#define PCICFG1_SIZE		0x01000000
+#define PCICFG1_BASE		0xfb000000
+
+#define PCICFG0_SIZE		0x01000000
+#define PCICFG0_BASE		0xfa000000
+
+#define PCIMEM_SIZE		0x01000000
+#define PCIMEM_BASE		0xf0000000
+
+#define XBUS_LEDS		((volatile unsigned char *)(XBUS_BASE + 0x12000))
+#define XBUS_LED_AMBER		(1 << 0)
+#define XBUS_LED_GREEN		(1 << 1)
+#define XBUS_LED_RED		(1 << 2)
+#define XBUS_LED_TOGGLE		(1 << 8)
+
+#define XBUS_SWITCH		((volatile unsigned char *)(XBUS_BASE + 0x12000))
+#define XBUS_SWITCH_SWITCH	((*XBUS_SWITCH) & 15)
+#define XBUS_SWITCH_J17_13	((*XBUS_SWITCH) & (1 << 4))
+#define XBUS_SWITCH_J17_11	((*XBUS_SWITCH) & (1 << 5))
+#define XBUS_SWITCH_J17_9	((*XBUS_SWITCH) & (1 << 6))
+
+#define UNCACHEABLE_ADDR	(ARMCSR_BASE + 0x108)
+
+
+/* PIC irq control */
+#define PIC_LO			0x20
+#define PIC_MASK_LO		0x21
+#define PIC_HI			0xA0
+#define PIC_MASK_HI		0xA1
+
+/* GPIO pins */
+#define GPIO_CCLK		0x800
+#define GPIO_DSCLK		0x400
+#define GPIO_E2CLK		0x200
+#define GPIO_IOLOAD		0x100
+#define GPIO_RED_LED		0x080
+#define GPIO_WDTIMER		0x040
+#define GPIO_DATA		0x020
+#define GPIO_IOCLK		0x010
+#define GPIO_DONE		0x008
+#define GPIO_FAN		0x004
+#define GPIO_GREEN_LED		0x002
+#define GPIO_RESET		0x001
+
+/* CPLD pins */
+#define CPLD_DS_ENABLE		8
+#define CPLD_7111_DISABLE	4
+#define CPLD_UNMUTE		2
+#define CPLD_FLASH_WR_ENABLE	1
+
+#ifndef __ASSEMBLY__
+extern void gpio_modify_op(int mask, int set);
+extern void gpio_modify_io(int mask, int in);
+extern int  gpio_read(void);
+extern void cpld_modify(int mask, int set);
+#endif
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM 	0x81000000
+
+#endif
diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h
new file mode 100644
index 0000000..a7b0662
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/io.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/io.h
+ *
+ *  Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Modifications:
+ *   06-12-1997	RMK	Created.
+ *   07-04-1999	RMK	Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffff
+
+/*
+ * Translation of various region addresses to virtual addresses
+ */
+#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
+#if 1
+#define __mem_pci(a)		(a)
+#else
+
+static inline void __iomem *___mem_pci(void __iomem *p)
+{
+	unsigned long a = (unsigned long)p;
+	BUG_ON(a <= 0xc0000000 || a >= 0xe0000000);
+	return p;
+}
+
+#define __mem_pci(a)		___mem_pci(a)
+#endif
+
+#endif
diff --git a/arch/arm/mach-footbridge/include/mach/irqs.h b/arch/arm/mach-footbridge/include/mach/irqs.h
new file mode 100644
index 0000000..400551e
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/irqs.h
@@ -0,0 +1,98 @@
+/*
+ * arch/arm/mach-footbridge/include/mach/irqs.h
+ *
+ * Copyright (C) 1998 Russell King
+ * Copyright (C) 1998 Phil Blundell
+ *
+ * Changelog:
+ *  20-Jan-1998	RMK	Started merge of EBSA286, CATS and NetWinder
+ *  01-Feb-1999	PJB	ISA IRQs start at 0 not 16
+ */
+#include <asm/mach-types.h>
+
+#define NR_IRQS			36
+#define NR_DC21285_IRQS		16
+
+#define _ISA_IRQ(x)		(0 + (x))
+#define _ISA_INR(x)		((x) - 0)
+#define _DC21285_IRQ(x)		(16 + (x))
+#define _DC21285_INR(x)		((x) - 16)
+
+/*
+ * This is a list of all interrupts that the 21285
+ * can generate and we handle.
+ */
+#define IRQ_CONRX		_DC21285_IRQ(0)
+#define IRQ_CONTX		_DC21285_IRQ(1)
+#define IRQ_TIMER1		_DC21285_IRQ(2)
+#define IRQ_TIMER2		_DC21285_IRQ(3)
+#define IRQ_TIMER3		_DC21285_IRQ(4)
+#define IRQ_IN0			_DC21285_IRQ(5)
+#define IRQ_IN1			_DC21285_IRQ(6)
+#define IRQ_IN2			_DC21285_IRQ(7)
+#define IRQ_IN3			_DC21285_IRQ(8)
+#define IRQ_DOORBELLHOST	_DC21285_IRQ(9)
+#define IRQ_DMA1		_DC21285_IRQ(10)
+#define IRQ_DMA2		_DC21285_IRQ(11)
+#define IRQ_PCI			_DC21285_IRQ(12)
+#define IRQ_SDRAMPARITY		_DC21285_IRQ(13)
+#define IRQ_I2OINPOST		_DC21285_IRQ(14)
+#define IRQ_PCI_ABORT		_DC21285_IRQ(15)
+#define IRQ_PCI_SERR		_DC21285_IRQ(16)
+#define IRQ_DISCARD_TIMER	_DC21285_IRQ(17)
+#define IRQ_PCI_DPERR		_DC21285_IRQ(18)
+#define IRQ_PCI_PERR		_DC21285_IRQ(19)
+
+#define IRQ_ISA_TIMER		_ISA_IRQ(0)
+#define IRQ_ISA_KEYBOARD	_ISA_IRQ(1)
+#define IRQ_ISA_CASCADE		_ISA_IRQ(2)
+#define IRQ_ISA_UART2		_ISA_IRQ(3)
+#define IRQ_ISA_UART		_ISA_IRQ(4)
+#define IRQ_ISA_FLOPPY		_ISA_IRQ(6)
+#define IRQ_ISA_PRINTER		_ISA_IRQ(7)
+#define IRQ_ISA_RTC_ALARM	_ISA_IRQ(8)
+#define IRQ_ISA_2		_ISA_IRQ(9)
+#define IRQ_ISA_PS2MOUSE	_ISA_IRQ(12)
+#define IRQ_ISA_HARDDISK1	_ISA_IRQ(14)
+#define IRQ_ISA_HARDDISK2	_ISA_IRQ(15)
+
+#define IRQ_MASK_UART_RX	(1 << 2)
+#define IRQ_MASK_UART_TX	(1 << 3)
+#define IRQ_MASK_TIMER1		(1 << 4)
+#define IRQ_MASK_TIMER2		(1 << 5)
+#define IRQ_MASK_TIMER3		(1 << 6)
+#define IRQ_MASK_IN0		(1 << 8)
+#define IRQ_MASK_IN1		(1 << 9)
+#define IRQ_MASK_IN2		(1 << 10)
+#define IRQ_MASK_IN3		(1 << 11)
+#define IRQ_MASK_DOORBELLHOST	(1 << 15)
+#define IRQ_MASK_DMA1		(1 << 16)
+#define IRQ_MASK_DMA2		(1 << 17)
+#define IRQ_MASK_PCI		(1 << 18)
+#define IRQ_MASK_SDRAMPARITY	(1 << 24)
+#define IRQ_MASK_I2OINPOST	(1 << 25)
+#define IRQ_MASK_PCI_ABORT	((1 << 29) | (1 << 30))
+#define IRQ_MASK_PCI_SERR	(1 << 23)
+#define IRQ_MASK_DISCARD_TIMER	(1 << 27)
+#define IRQ_MASK_PCI_DPERR	(1 << 28)
+#define IRQ_MASK_PCI_PERR	(1 << 31)
+
+/*
+ * Netwinder interrupt allocations
+ */
+#define IRQ_NETWINDER_ETHER10	IRQ_IN0
+#define IRQ_NETWINDER_ETHER100	IRQ_IN1
+#define IRQ_NETWINDER_VIDCOMP	IRQ_IN2
+#define IRQ_NETWINDER_PS2MOUSE	_ISA_IRQ(5)
+#define IRQ_NETWINDER_IR	_ISA_IRQ(6)
+#define IRQ_NETWINDER_BUTTON	_ISA_IRQ(10)
+#define IRQ_NETWINDER_VGA	_ISA_IRQ(11)
+#define IRQ_NETWINDER_SOUND	_ISA_IRQ(12)
+
+#undef RTC_IRQ
+#define RTC_IRQ		IRQ_ISA_RTC_ALARM
+#define I8042_KBD_IRQ	IRQ_ISA_KEYBOARD
+#define I8042_AUX_IRQ	(machine_is_netwinder() ? IRQ_NETWINDER_PS2MOUSE : IRQ_ISA_PS2MOUSE)
+#define IRQ_FLOPPYDISK	IRQ_ISA_FLOPPY
+
+#define irq_canonicalize(_i)	(((_i) == IRQ_ISA_CASCADE) ? IRQ_ISA_2 : _i)
diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h
new file mode 100644
index 0000000..e9cae99
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/memory.h
@@ -0,0 +1,67 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/memory.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   20-Oct-1996 RMK	Created
+ *   31-Dec-1997 RMK	Fixed definitions to reduce warnings.
+ *   17-May-1998 DAG	Added __virt_to_bus and __bus_to_virt functions.
+ *   21-Nov-1998 RMK	Changed __virt_to_bus and __bus_to_virt to macros.
+ *   21-Mar-1999 RMK	Added PAGE_OFFSET for co285 architecture.
+ *			Renamed to memory.h
+ *			Moved PAGE_OFFSET and TASK_SIZE here
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+
+#if defined(CONFIG_FOOTBRIDGE_ADDIN)
+/*
+ * If we may be using add-in footbridge mode, then we must
+ * use the out-of-line translation that makes use of the
+ * PCI BAR
+ */
+#ifndef __ASSEMBLY__
+extern unsigned long __virt_to_bus(unsigned long);
+extern unsigned long __bus_to_virt(unsigned long);
+#endif
+
+#elif defined(CONFIG_FOOTBRIDGE_HOST)
+
+#define __virt_to_bus(x)	((x) - 0xe0000000)
+#define __bus_to_virt(x)	((x) + 0xe0000000)
+
+#else
+
+#error "Undefined footbridge mode"
+
+#endif
+
+/* Task size and page offset at 3GB */
+#define TASK_SIZE		UL(0xbf000000)
+#define PAGE_OFFSET		UL(0xc0000000)
+
+/*
+ * Cache flushing area.
+ */
+#define FLUSH_BASE		0xf9000000
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET		UL(0x00000000)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
+
+#define FLUSH_BASE_PHYS		0x50000000
+
+#endif
diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h
new file mode 100644
index 0000000..01c9f40
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/system.h
@@ -0,0 +1,69 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/system.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/hardware/dec21285.h>
+#include <asm/io.h>
+#include <mach/hardware.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	if (mode == 's') {
+		/*
+		 * Jump into the ROM
+		 */
+		cpu_reset(0x41000000);
+	} else {
+		if (machine_is_netwinder()) {
+			/* open up the SuperIO chip
+			 */
+			outb(0x87, 0x370);
+			outb(0x87, 0x370);
+
+			/* aux function group 1 (logical device 7)
+			 */
+			outb(0x07, 0x370);
+			outb(0x07, 0x371);
+
+			/* set GP16 for WD-TIMER output
+			 */
+			outb(0xe6, 0x370);
+			outb(0x00, 0x371);
+
+			/* set a RED LED and toggle WD_TIMER for rebooting
+			 */
+			outb(0xc4, 0x338);
+		} else {
+			/* 
+			 * Force the watchdog to do a CPU reset.
+			 *
+			 * After making sure that the watchdog is disabled
+			 * (so we can change the timer registers) we first
+			 * enable the timer to autoreload itself.  Next, the
+			 * timer interval is set really short and any
+			 * current interrupt request is cleared (so we can
+			 * see an edge transition).  Finally, TIMER4 is
+			 * enabled as the watchdog.
+			 */
+			*CSR_SA110_CNTL &= ~(1 << 13);
+			*CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
+					   TIMER_CNTL_AUTORELOAD |
+					   TIMER_CNTL_DIV16;
+			*CSR_TIMER4_LOAD = 0x2;
+			*CSR_TIMER4_CLR  = 0;
+			*CSR_SA110_CNTL |= (1 << 13);
+		}
+	}
+}
diff --git a/arch/arm/mach-footbridge/include/mach/timex.h b/arch/arm/mach-footbridge/include/mach/timex.h
new file mode 100644
index 0000000..d0fea9d
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/timex.h
@@ -0,0 +1,18 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/timex.h
+ *
+ *  Copyright (C) 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  EBSA285 architecture timex specifications
+ */
+
+/*
+ * We assume a constant here; this satisfies the maths in linux/timex.h
+ * and linux/time.h.  CLOCK_TICK_RATE is actually system dependent, but
+ * this must be a constant.
+ */
+#define CLOCK_TICK_RATE		(50000000/16)
diff --git a/arch/arm/mach-footbridge/include/mach/uncompress.h b/arch/arm/mach-footbridge/include/mach/uncompress.h
new file mode 100644
index 0000000..5dfa442
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/uncompress.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1996-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/mach-types.h>
+
+/*
+ * Note! This could cause problems on the NetWinder
+ */
+#define DC21285_BASE ((volatile unsigned int *)0x42000160)
+#define SER0_BASE    ((volatile unsigned char *)0x7c0003f8)
+
+static inline void putc(char c)
+{
+	if (machine_is_netwinder()) {
+		while ((SER0_BASE[5] & 0x60) != 0x60)
+			barrier();
+		SER0_BASE[0] = c;
+	} else {
+		while (DC21285_BASE[6] & 8);
+		DC21285_BASE[0] = c;
+	}
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-footbridge/include/mach/vmalloc.h b/arch/arm/mach-footbridge/include/mach/vmalloc.h
new file mode 100644
index 0000000..d0958d8
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/vmalloc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#define VMALLOC_END       (PAGE_OFFSET + 0x30000000)
diff --git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c
index b8e53d6..7132e52 100644
--- a/arch/arm/mach-footbridge/isa-irq.c
+++ b/arch/arm/mach-footbridge/isa-irq.c
@@ -21,7 +21,7 @@
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/dec21285.h>
 #include <asm/irq.h>
 #include <asm/io.h>
diff --git a/arch/arm/mach-footbridge/netwinder-leds.c b/arch/arm/mach-footbridge/netwinder-leds.c
index 2a2fbff..d91a4f4 100644
--- a/arch/arm/mach-footbridge/netwinder-leds.c
+++ b/arch/arm/mach-footbridge/netwinder-leds.c
@@ -21,7 +21,7 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-footbridge/time.c b/arch/arm/mach-footbridge/time.c
index bffba25..fd9a7c1 100644
--- a/arch/arm/mach-footbridge/time.c
+++ b/arch/arm/mach-footbridge/time.c
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-ebsa285/time.h
+ *  arch/arm/mach-footbridge/include/mach/time.h
  *
  *  Copyright (C) 1998 Russell King.
  *  Copyright (C) 1998 Phil Blundell
@@ -23,7 +23,7 @@
 #include <linux/mc146818rtc.h>
 #include <linux/bcd.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index 26aefae..b5f9741 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -23,11 +23,11 @@
 #include <asm/pgtable.h>
 #include <asm/dma.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include <asm/mach/dma.h>
 
diff --git a/arch/arm/mach-h720x/cpu-h7201.c b/arch/arm/mach-h720x/cpu-h7201.c
index cd51520b..24df2a3 100644
--- a/arch/arm/mach-h720x/cpu-h7201.c
+++ b/arch/arm/mach-h720x/cpu-h7201.c
@@ -17,9 +17,9 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <asm/types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include "common.h"
diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c
index 22573fc..53e1f62 100644
--- a/arch/arm/mach-h720x/cpu-h7202.c
+++ b/arch/arm/mach-h720x/cpu-h7202.c
@@ -17,9 +17,9 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <asm/types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <linux/device.h>
diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c
index 899f935..78be457 100644
--- a/arch/arm/mach-h720x/h7201-eval.c
+++ b/arch/arm/mach-h720x/h7201-eval.c
@@ -25,7 +25,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include "common.h"
 
 MACHINE_START(H7201, "Hynix GMS30C7201")
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index eb725bd..56161d5 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -25,7 +25,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include "common.h"
 
 static struct resource cirrus_resources[] = {
diff --git a/arch/arm/mach-h720x/include/mach/boards.h b/arch/arm/mach-h720x/include/mach/boards.h
new file mode 100644
index 0000000..079b279
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/boards.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-h720x/include/mach/boards.h
+ *
+ * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *
+ * This file contains the board specific defines for various devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_INCMACH_H
+#error Do not include this file directly. Include asm/hardware.h instead !
+#endif
+
+/* Hynix H7202 developer board specific device defines */
+#ifdef CONFIG_ARCH_H7202
+
+/* FLASH */
+#define FLASH_VIRT		0xd0000000
+#define FLASH_PHYS		0x00000000
+#define FLASH_SIZE		0x02000000
+
+/* onboard LAN controller */
+# define ETH0_PHYS		0x08000000
+
+/* Touch screen defines */
+/* GPIO Port */
+#define PEN_GPIO		GPIO_B_VIRT
+/* Bitmask for pen down interrupt */
+#define PEN_INT_BIT		(1<<7)
+/* Bitmask for pen up interrupt */
+#define PEN_ENA_BIT		(1<<6)
+/* pen up interrupt */
+#define IRQ_PEN			IRQ_MUX_GPIOB(7)
+
+#endif
+
+/* Hynix H7201 developer board specific device defines */
+#if defined (CONFIG_ARCH_H7201)
+/* ROM DISK SPACE */
+#define ROM_DISK_BASE           0xc1800000
+#define ROM_DISK_START          0x41800000
+#define ROM_DISK_SIZE           0x00700000
+
+/* SRAM DISK SPACE */
+#define SRAM_DISK_BASE          0xf1000000
+#define SRAM_DISK_START         0x04000000
+#define SRAM_DISK_SIZE          0x00400000
+#endif
+
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
new file mode 100644
index 0000000..6294a13
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -0,0 +1,40 @@
+/* arch/arm/mach-h720x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.equ    io_virt, IO_BASE
+		.equ    io_phys, IO_START
+
+		.macro  addruart,rx
+		mrc     p15, 0, \rx, c1, c0
+		tst     \rx, #1  	       @ MMU enabled?
+		moveq   \rx, #io_phys	       @ physical base address
+		movne   \rx, #io_virt	       @ virtual address
+		add     \rx, \rx, #0x00020000   @ UART1
+		.endm
+
+		.macro  senduart,rd,rx
+		str     \rd, [\rx, #0x0]        @ UARTDR
+
+		.endm
+
+		.macro  waituart,rd,rx
+1001:		ldr     \rd, [\rx, #0x18]       @ UARTFLG
+		tst     \rd, #1 << 5	       @ UARTFLGUTXFF - 1 when full
+		bne     1001b
+		.endm
+
+		.macro  busyuart,rd,rx
+1001:		ldr     \rd, [\rx, #0x18]       @ UARTFLG
+		tst     \rd, #1 << 3	       @ UARTFLGUBUSY - 1 when busy
+		bne     1001b
+		.endm
diff --git a/arch/arm/mach-h720x/include/mach/dma.h b/arch/arm/mach-h720x/include/mach/dma.h
new file mode 100644
index 0000000..0a9d86e
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/dma.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-h720x/include/mach/dma.h
+ *
+ * Architecture DMA routes
+ *
+ * Copyright (C) 1997.1998 Russell King
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS		0xd0000000
+
+#if defined (CONFIG_CPU_H7201)
+#define MAX_DMA_CHANNELS	3
+#elif defined (CONFIG_CPU_H7202)
+#define MAX_DMA_CHANNELS	4
+#else
+#error processor definition missmatch
+#endif
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-h720x/include/mach/entry-macro.S b/arch/arm/mach-h720x/include/mach/entry-macro.S
new file mode 100644
index 0000000..6d3b917
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/entry-macro.S
@@ -0,0 +1,66 @@
+/*
+ * arch/arm/mach-h720x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Hynix HMS720x based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+		.macro  disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202)
+		@ we could use the id register on H7202, but this is not
+		@ properly updated when we come back from asm_do_irq
+		@ without a previous return from interrupt
+		@ (see loops below in irq_svc, irq_usr)
+		@ We see unmasked pending ints only, as the masked pending ints
+		@ are not visible here
+
+		mov     \base, #0xf0000000	       @ base register
+		orr     \base, \base, #0x24000	       @ irqbase
+		ldr     \irqstat, [\base, #0x04]        @ get interrupt status
+#if defined (CONFIG_CPU_H7201)
+		ldr	\tmp, =0x001fffff
+#else
+		mvn     \tmp, #0xc0000000
+#endif
+		and     \irqstat, \irqstat, \tmp        @ mask out unused ints
+		mov     \irqnr, #0
+
+		mov     \tmp, #0xff00
+		orr     \tmp, \tmp, #0xff
+		tst     \irqstat, \tmp
+		addeq   \irqnr, \irqnr, #16
+		moveq   \irqstat, \irqstat, lsr #16
+		tst     \irqstat, #255
+		addeq   \irqnr, \irqnr, #8
+		moveq   \irqstat, \irqstat, lsr #8
+		tst     \irqstat, #15
+		addeq   \irqnr, \irqnr, #4
+		moveq   \irqstat, \irqstat, lsr #4
+		tst     \irqstat, #3
+		addeq   \irqnr, \irqnr, #2
+		moveq   \irqstat, \irqstat, lsr #2
+		tst     \irqstat, #1
+		addeq   \irqnr, \irqnr, #1
+		moveq   \irqstat, \irqstat, lsr #1
+		tst     \irqstat, #1		       @ bit 0 should be set
+		.endm
+
+		.macro  irq_prio_table
+		.endm
+
+#else
+#error hynix processor selection missmatch
+#endif
+
diff --git a/arch/arm/mach-h720x/include/mach/h7201-regs.h b/arch/arm/mach-h720x/include/mach/h7201-regs.h
new file mode 100644
index 0000000..611b494
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/h7201-regs.h
@@ -0,0 +1,67 @@
+/*
+ * arch/arm/mach-h720x/include/mach/h7201-regs.h
+ *
+ * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
+ *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *           (C) 2004 Sascha Hauer    <s.hauer@pengutronix.de>
+ *
+ * This file contains the hardware definitions of the h720x processors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Do not add implementations specific defines here. This files contains
+ * only defines of the onchip peripherals. Add those defines to boards.h,
+ * which is included by this file.
+ */
+
+#define SERIAL2_VIRT 		(IO_VIRT + 0x50100)
+#define SERIAL3_VIRT 		(IO_VIRT + 0x50200)
+
+/*
+ * PCMCIA
+ */
+#define PCMCIA0_ATT_BASE        0xe5000000
+#define PCMCIA0_ATT_SIZE        0x00200000
+#define PCMCIA0_ATT_START       0x20000000
+#define PCMCIA0_MEM_BASE        0xe5200000
+#define PCMCIA0_MEM_SIZE        0x00200000
+#define PCMCIA0_MEM_START       0x24000000
+#define PCMCIA0_IO_BASE         0xe5400000
+#define PCMCIA0_IO_SIZE         0x00200000
+#define PCMCIA0_IO_START        0x28000000
+
+#define PCMCIA1_ATT_BASE        0xe5600000
+#define PCMCIA1_ATT_SIZE        0x00200000
+#define PCMCIA1_ATT_START       0x30000000
+#define PCMCIA1_MEM_BASE        0xe5800000
+#define PCMCIA1_MEM_SIZE        0x00200000
+#define PCMCIA1_MEM_START       0x34000000
+#define PCMCIA1_IO_BASE         0xe5a00000
+#define PCMCIA1_IO_SIZE         0x00200000
+#define PCMCIA1_IO_START        0x38000000
+
+#define PRIME3C_BASE            0xf0050000
+#define PRIME3C_SIZE            0x00001000
+#define PRIME3C_START           0x10000000
+
+/* VGA Controller */
+#define VGA_RAMBASE 		0x50
+#define VGA_TIMING0 		0x60
+#define VGA_TIMING1 		0x64
+#define VGA_TIMING2 		0x68
+#define VGA_TIMING3 		0x6c
+
+#define LCD_CTRL_VGA_ENABLE   	0x00000100
+#define LCD_CTRL_VGA_BPP_MASK 	0x00000600
+#define LCD_CTRL_VGA_4BPP    	0x00000000
+#define LCD_CTRL_VGA_8BPP    	0x00000200
+#define LCD_CTRL_VGA_16BPP   	0x00000300
+#define LCD_CTRL_SHARE_DMA    	0x00000800
+#define LCD_CTRL_VDE          	0x00100000
+#define LCD_CTRL_LPE          	0x00400000	/* LCD Power enable */
+#define LCD_CTRL_BLE          	0x00800000	/* LCD backlight enable */
+
+#define VGA_PALETTE_BASE	(IO_VIRT + 0x10800)
diff --git a/arch/arm/mach-h720x/include/mach/h7202-regs.h b/arch/arm/mach-h720x/include/mach/h7202-regs.h
new file mode 100644
index 0000000..17c12eb
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/h7202-regs.h
@@ -0,0 +1,155 @@
+/*
+ * arch/arm/mach-h720x/include/mach/h7202-regs.h
+ *
+ * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
+ *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *           (C) 2004 Sascha Hauer    <s.hauer@pengutronix.de>
+ *
+ * This file contains the hardware definitions of the h720x processors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Do not add implementations specific defines here. This files contains
+ * only defines of the onchip peripherals. Add those defines to boards.h,
+ * which is included by this file.
+ */
+
+#define SERIAL2_OFS		0x2d000
+#define SERIAL2_BASE		(IO_PHYS + SERIAL2_OFS)
+#define SERIAL2_VIRT 		(IO_VIRT + SERIAL2_OFS)
+#define SERIAL3_OFS		0x2e000
+#define SERIAL3_BASE		(IO_PHYS + SERIAL3_OFS)
+#define SERIAL3_VIRT 		(IO_VIRT + SERIAL3_OFS)
+
+/* Matrix Keyboard Controller */
+#define KBD_VIRT		(IO_VIRT + 0x22000)
+#define KBD_KBCR		0x00
+#define KBD_KBSC		0x04
+#define KBD_KBTR		0x08
+#define KBD_KBVR0		0x0C
+#define KBD_KBVR1		0x10
+#define KBD_KBSR		0x18
+
+#define KBD_KBCR_SCANENABLE	(1 << 7)
+#define KBD_KBCR_NPOWERDOWN	(1 << 2)
+#define KBD_KBCR_CLKSEL_MASK	(3)
+#define KBD_KBCR_CLKSEL_PCLK2	0x0
+#define KBD_KBCR_CLKSEL_PCLK128	0x1
+#define KBD_KBCR_CLKSEL_PCLK256	0x2
+#define KBD_KBCR_CLKSEL_PCLK512	0x3
+
+#define KBD_KBSR_INTR		(1 << 0)
+#define KBD_KBSR_WAKEUP		(1 << 1)
+
+/* USB device controller */
+
+#define USBD_BASE		(IO_VIRT + 0x12000)
+#define USBD_LENGTH		0x3C
+
+#define USBD_GCTRL		0x00
+#define USBD_EPCTRL		0x04
+#define USBD_INTMASK		0x08
+#define USBD_INTSTAT		0x0C
+#define USBD_PWR		0x10
+#define USBD_DMARXTX		0x14
+#define USBD_DEVID		0x18
+#define USBD_DEVCLASS		0x1C
+#define USBD_INTCLASS		0x20
+#define USBD_SETUP0		0x24
+#define USBD_SETUP1		0x28
+#define USBD_ENDP0RD		0x2C
+#define USBD_ENDP0WT		0x30
+#define USBD_ENDP1RD		0x34
+#define USBD_ENDP2WT		0x38
+
+/* PS/2 port */
+#define PSDATA 0x00
+#define PSSTAT 0x04
+#define PSSTAT_TXEMPTY (1<<0)
+#define PSSTAT_TXBUSY (1<<1)
+#define PSSTAT_RXFULL (1<<2)
+#define PSSTAT_RXBUSY (1<<3)
+#define PSSTAT_CLKIN (1<<4)
+#define PSSTAT_DATAIN (1<<5)
+#define PSSTAT_PARITY (1<<6)
+
+#define PSCONF 0x08
+#define PSCONF_ENABLE (1<<0)
+#define PSCONF_TXINTEN (1<<2)
+#define PSCONF_RXINTEN (1<<3)
+#define PSCONF_FORCECLKLOW (1<<4)
+#define PSCONF_FORCEDATLOW (1<<5)
+#define PSCONF_LCE (1<<6)
+
+#define PSINTR 0x0C
+#define PSINTR_TXINT (1<<0)
+#define PSINTR_RXINT (1<<1)
+#define PSINTR_PAR (1<<2)
+#define PSINTR_RXTO (1<<3)
+#define PSINTR_TXTO (1<<4)
+
+#define PSTDLO 0x10 /* clk low before start transmission */
+#define PSTPRI 0x14 /* PRI clock */
+#define PSTXMT 0x18 /* maximum transmission time */
+#define PSTREC 0x20 /* maximum receive time */
+#define PSPWDN 0x3c
+
+/* ADC converter */
+#define ADC_BASE 		(IO_VIRT + 0x29000)
+#define ADC_CR 			0x00
+#define ADC_TSCTRL 		0x04
+#define ADC_BT_CTRL 		0x08
+#define ADC_MC_CTRL		0x0C
+#define ADC_STATUS		0x10
+
+/* ADC control register bits */
+#define ADC_CR_PW_CTRL 		0x80
+#define ADC_CR_DIRECTC		0x04
+#define ADC_CR_CONTIME_NO	0x00
+#define ADC_CR_CONTIME_2	0x04
+#define ADC_CR_CONTIME_4	0x08
+#define ADC_CR_CONTIME_ADE	0x0c
+#define ADC_CR_LONGCALTIME	0x01
+
+/* ADC touch panel register bits */
+#define ADC_TSCTRL_ENABLE 	0x80
+#define ADC_TSCTRL_INTR   	0x40
+#define	ADC_TSCTRL_SWBYPSS	0x20
+#define ADC_TSCTRL_SWINVT	0x10
+#define ADC_TSCTRL_S400   	0x03
+#define ADC_TSCTRL_S200   	0x02
+#define ADC_TSCTRL_S100   	0x01
+#define ADC_TSCTRL_S50    	0x00
+
+/* ADC Interrupt Status Register bits */
+#define ADC_STATUS_TS_BIT	0x80
+#define ADC_STATUS_MBT_BIT	0x40
+#define ADC_STATUS_BBT_BIT	0x20
+#define ADC_STATUS_MIC_BIT	0x10
+
+/* Touch data registers */
+#define ADC_TS_X0X1  		0x30
+#define ADC_TS_X2X3		0x34
+#define ADC_TS_Y0Y1		0x38
+#define ADC_TS_Y2Y3  		0x3c
+#define ADC_TS_X4X5  		0x40
+#define ADC_TS_X6X7  		0x44
+#define ADC_TS_Y4Y5		0x48
+#define ADC_TS_Y6Y7		0x50
+
+/* battery data */
+#define ADC_MB_DATA		0x54
+#define ADC_BB_DATA		0x58
+
+/* Sound data register */
+#define ADC_SD_DAT0 		0x60
+#define ADC_SD_DAT1		0x64
+#define ADC_SD_DAT2		0x68
+#define ADC_SD_DAT3		0x6c
+#define ADC_SD_DAT4		0x70
+#define ADC_SD_DAT5		0x74
+#define ADC_SD_DAT6		0x78
+#define ADC_SD_DAT7		0x7c
diff --git a/arch/arm/mach-h720x/include/mach/hardware.h b/arch/arm/mach-h720x/include/mach/hardware.h
new file mode 100644
index 0000000..6c19156e2a
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/hardware.h
@@ -0,0 +1,192 @@
+/*
+ * arch/arm/mach-h720x/include/mach/hardware.h
+ *
+ * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
+ *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *
+ * This file contains the hardware definitions of the h720x processors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Do not add implementations specific defines here. This files contains
+ * only defines of the onchip peripherals. Add those defines to boards.h,
+ * which is included by this file.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#define IOCLK (3686400L)
+
+/* Onchip peripherals */
+
+#define IO_VIRT			0xf0000000	/* IO peripherals */
+#define IO_PHYS			0x80000000
+#define IO_SIZE			0x00050000
+
+#ifdef CONFIG_CPU_H7202
+#include "h7202-regs.h"
+#elif defined CONFIG_CPU_H7201
+#include "h7201-regs.h"
+#else
+#error machine definition mismatch
+#endif
+
+/* Macro to access the CPU IO */
+#define CPU_IO(x) (*(volatile u32*)(x))
+
+/* Macro to access general purpose regs (base, offset) */
+#define CPU_REG(x,y) CPU_IO(x+y)
+
+/* Macro to access irq related regs */
+#define IRQ_REG(x) CPU_REG(IRQC_VIRT,x)
+
+/* CPU registers */
+/* general purpose I/O */
+#define GPIO_VIRT(x)		(IO_VIRT + 0x23000 + ((x)<<5))
+#define GPIO_A_VIRT		(GPIO_VIRT(0))
+#define GPIO_B_VIRT		(GPIO_VIRT(1))
+#define GPIO_C_VIRT		(GPIO_VIRT(2))
+#define GPIO_D_VIRT		(GPIO_VIRT(3))
+#define GPIO_E_VIRT		(GPIO_VIRT(4))
+#define GPIO_AMULSEL		(GPIO_VIRT(0) + 0xA4)
+
+#define AMULSEL_USIN2	(1<<5)
+#define AMULSEL_USOUT2	(1<<6)
+#define AMULSEL_USIN3	(1<<13)
+#define AMULSEL_USOUT3	(1<<14)
+#define AMULSEL_IRDIN	(1<<15)
+#define AMULSEL_IRDOUT	(1<<7)
+
+/* Register offsets general purpose I/O */
+#define GPIO_DATA		0x00
+#define GPIO_DIR		0x04
+#define GPIO_MASK		0x08
+#define GPIO_STAT		0x0C
+#define GPIO_EDGE		0x10
+#define GPIO_CLR		0x14
+#define GPIO_POL		0x18
+#define GPIO_EN			0x1C
+
+/*interrupt controller */
+#define IRQC_VIRT		(IO_VIRT + 0x24000)
+/* register offset interrupt controller */
+#define IRQC_IER		0x00
+#define IRQC_ISR		0x04
+
+/* timer unit */
+#define TIMER_VIRT		(IO_VIRT + 0x25000)
+/* Register offsets timer unit */
+#define TM0_PERIOD   		0x00
+#define TM0_COUNT    		0x08
+#define TM0_CTRL     		0x10
+#define TM1_PERIOD   		0x20
+#define TM1_COUNT    		0x28
+#define TM1_CTRL     		0x30
+#define TM2_PERIOD   		0x40
+#define TM2_COUNT    		0x48
+#define TM2_CTRL     		0x50
+#define TIMER_TOPCTRL		0x60
+#define TIMER_TOPSTAT		0x64
+#define T64_COUNTL		0x80
+#define T64_COUNTH		0x84
+#define T64_CTRL		0x88
+#define T64_BASEL		0x94
+#define T64_BASEH		0x98
+/* Bitmaks timer unit TOPSTAT reg */
+#define TSTAT_T0INT		0x1
+#define TSTAT_T1INT		0x2
+#define TSTAT_T2INT		0x4
+#define TSTAT_T3INT		0x8
+/* Bit description of TMx_CTRL register */
+#define TM_START  		0x1
+#define TM_REPEAT 		0x2
+#define TM_RESET  		0x4
+/* Bit description of TIMER_CTRL register */
+#define ENABLE_TM0_INTR  	0x1
+#define ENABLE_TM1_INTR  	0x2
+#define ENABLE_TM2_INTR  	0x4
+#define TIMER_ENABLE_BIT 	0x8
+#define ENABLE_TIMER64   	0x10
+#define ENABLE_TIMER64_INT	0x20
+
+/* PMU & PLL */
+#define PMU_BASE 		(IO_VIRT + 0x1000)
+#define PMU_MODE		0x00
+#define PMU_STAT   		0x20
+#define PMU_PLL_CTRL 		0x28
+
+/* PMU Mode bits */
+#define PMU_MODE_SLOW		0x00
+#define PMU_MODE_RUN		0x01
+#define PMU_MODE_IDLE		0x02
+#define PMU_MODE_SLEEP		0x03
+#define PMU_MODE_INIT		0x04
+#define PMU_MODE_DEEPSLEEP	0x07
+#define PMU_MODE_WAKEUP		0x08
+
+/* PMU ... */
+#define PLL_2_EN		0x8000
+#define PLL_1_EN		0x4000
+#define PLL_3_MUTE		0x0080
+
+/* Control bits for PMU/ PLL */
+#define PMU_WARMRESET		0x00010000
+#define PLL_CTRL_MASK23		0x000080ff
+
+/* LCD Controller */
+#define LCD_BASE 		(IO_VIRT + 0x10000)
+#define LCD_CTRL 		0x00
+#define LCD_STATUS		0x04
+#define LCD_STATUS_M		0x08
+#define LCD_INTERRUPT		0x0C
+#define LCD_DBAR		0x10
+#define LCD_DCAR		0x14
+#define LCD_TIMING0 		0x20
+#define LCD_TIMING1 		0x24
+#define LCD_TIMING2 		0x28
+#define LCD_TEST		0x40
+
+/* LCD Control Bits */
+#define LCD_CTRL_LCD_ENABLE   	0x00000001
+/* Bits per pixel */
+#define LCD_CTRL_LCD_BPP_MASK 	0x00000006
+#define LCD_CTRL_LCD_4BPP    	0x00000000
+#define LCD_CTRL_LCD_8BPP    	0x00000002
+#define LCD_CTRL_LCD_16BPP   	0x00000004
+#define LCD_CTRL_LCD_BW		0x00000008
+#define LCD_CTRL_LCD_TFT	0x00000010
+#define LCD_CTRL_BGR		0x00001000
+#define LCD_CTRL_LCD_VCOMP	0x00080000
+#define LCD_CTRL_LCD_MONO8	0x00200000
+#define LCD_CTRL_LCD_PWR	0x00400000
+#define LCD_CTRL_LCD_BLE	0x00800000
+#define LCD_CTRL_LDBUSEN	0x01000000
+
+/* Palette */
+#define LCD_PALETTE_BASE 	(IO_VIRT + 0x10400)
+
+/* Serial ports */
+#define SERIAL0_OFS		0x20000
+#define SERIAL0_VIRT 		(IO_VIRT + SERIAL0_OFS)
+#define SERIAL0_BASE		(IO_PHYS + SERIAL0_OFS)
+
+#define SERIAL1_OFS		0x21000
+#define SERIAL1_VIRT 		(IO_VIRT + SERIAL1_OFS)
+#define SERIAL1_BASE		(IO_PHYS + SERIAL1_OFS)
+
+#define SERIAL_ENABLE		0x30
+#define SERIAL_ENABLE_EN	(1<<0)
+
+/* General defines to pacify gcc */
+#define PCIO_BASE 		(0)	/* for inb, outb and friends */
+#define PCIO_VIRT		PCIO_BASE
+
+#define __ASM_ARCH_HARDWARE_INCMACH_H
+#include "boards.h"
+#undef __ASM_ARCH_HARDWARE_INCMACH_H
+
+#endif				/* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-h720x/include/mach/io.h b/arch/arm/mach-h720x/include/mach/io.h
new file mode 100644
index 0000000..1dab74c
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/io.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-h720x/include/mach/io.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *
+ *  09-19-2001	JJKIM
+ *  		Created from arch/arm/mach-l7200/include/mach/io.h
+ *
+ *  03-27-2003  Robert Schwebel <r.schwebel@pengutronix.de>:
+ *  		re-unified header files for h720x
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)		((void __iomem *)(a))
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/irqs.h b/arch/arm/mach-h720x/include/mach/irqs.h
new file mode 100644
index 0000000..430a92b
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/irqs.h
@@ -0,0 +1,116 @@
+/*
+ * arch/arm/mach-h720x/include/mach/irqs.h
+ *
+ * Copyright (C) 2000 Jungjun Kim
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#if defined (CONFIG_CPU_H7201)
+
+#define IRQ_PMU		0		/* 0x000001 */
+#define IRQ_DMA		1 		/* 0x000002 */
+#define IRQ_LCD		2		/* 0x000004 */
+#define IRQ_VGA		3 		/* 0x000008 */
+#define IRQ_PCMCIA1 	4 		/* 0x000010 */
+#define IRQ_PCMCIA2 	5 		/* 0x000020 */
+#define IRQ_AFE		6 		/* 0x000040 */
+#define IRQ_AIC		7 		/* 0x000080 */
+#define IRQ_KEYBOARD 	8 		/* 0x000100 */
+#define IRQ_TIMER0	9 		/* 0x000200 */
+#define IRQ_RTC		10		/* 0x000400 */
+#define IRQ_SOUND	11		/* 0x000800 */
+#define IRQ_USB		12		/* 0x001000 */
+#define IRQ_IrDA 	13		/* 0x002000 */
+#define IRQ_UART0	14		/* 0x004000 */
+#define IRQ_UART1	15		/* 0x008000 */
+#define IRQ_SPI		16		/* 0x010000 */
+#define IRQ_GPIOA 	17		/* 0x020000 */
+#define IRQ_GPIOB	18		/* 0x040000 */
+#define IRQ_GPIOC	19		/* 0x080000 */
+#define IRQ_GPIOD	20		/* 0x100000 */
+#define IRQ_CommRX	21		/* 0x200000 */
+#define IRQ_CommTX	22		/* 0x400000 */
+#define IRQ_Soft	23		/* 0x800000 */
+
+#define NR_GLBL_IRQS	24
+
+#define IRQ_CHAINED_GPIOA(x)  (NR_GLBL_IRQS + x)
+#define IRQ_CHAINED_GPIOB(x)  (IRQ_CHAINED_GPIOA(32) + x)
+#define IRQ_CHAINED_GPIOC(x)  (IRQ_CHAINED_GPIOB(32) + x)
+#define IRQ_CHAINED_GPIOD(x)  (IRQ_CHAINED_GPIOC(32) + x)
+#define NR_IRQS               IRQ_CHAINED_GPIOD(32)
+
+/* Enable mask for multiplexed interrupts */
+#define IRQ_ENA_MUX	(1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) \
+			| (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD)
+
+
+#elif defined (CONFIG_CPU_H7202)
+
+#define IRQ_PMU		0		/* 0x00000001 */
+#define IRQ_DMA		1		/* 0x00000002 */
+#define IRQ_LCD		2		/* 0x00000004 */
+#define IRQ_SOUND	3		/* 0x00000008 */
+#define IRQ_I2S		4		/* 0x00000010 */
+#define IRQ_USB 	5		/* 0x00000020 */
+#define IRQ_MMC 	6		/* 0x00000040 */
+#define IRQ_RTC 	7		/* 0x00000080 */
+#define IRQ_UART0 	8		/* 0x00000100 */
+#define IRQ_UART1 	9		/* 0x00000200 */
+#define IRQ_UART2 	10		/* 0x00000400 */
+#define IRQ_UART3 	11		/* 0x00000800 */
+#define IRQ_KBD 	12		/* 0x00001000 */
+#define IRQ_PS2 	13		/* 0x00002000 */
+#define IRQ_AIC 	14		/* 0x00004000 */
+#define IRQ_TIMER0 	15		/* 0x00008000 */
+#define IRQ_TIMERX 	16		/* 0x00010000 */
+#define IRQ_WDT 	17		/* 0x00020000 */
+#define IRQ_CAN0 	18		/* 0x00040000 */
+#define IRQ_CAN1 	19		/* 0x00080000 */
+#define IRQ_EXT0 	20		/* 0x00100000 */
+#define IRQ_EXT1 	21		/* 0x00200000 */
+#define IRQ_GPIOA 	22		/* 0x00400000 */
+#define IRQ_GPIOB 	23		/* 0x00800000 */
+#define IRQ_GPIOC 	24		/* 0x01000000 */
+#define IRQ_GPIOD 	25		/* 0x02000000 */
+#define IRQ_GPIOE 	26		/* 0x04000000 */
+#define IRQ_COMMRX 	27		/* 0x08000000 */
+#define IRQ_COMMTX 	28		/* 0x10000000 */
+#define IRQ_SMC 	29		/* 0x20000000 */
+#define IRQ_Soft 	30		/* 0x40000000 */
+#define IRQ_RESERVED1 	31		/* 0x80000000 */
+#define NR_GLBL_IRQS	32
+
+#define NR_TIMERX_IRQS	3
+
+#define IRQ_CHAINED_GPIOA(x)  (NR_GLBL_IRQS + x)
+#define IRQ_CHAINED_GPIOB(x)  (IRQ_CHAINED_GPIOA(32) + x)
+#define IRQ_CHAINED_GPIOC(x)  (IRQ_CHAINED_GPIOB(32) + x)
+#define IRQ_CHAINED_GPIOD(x)  (IRQ_CHAINED_GPIOC(32) + x)
+#define IRQ_CHAINED_GPIOE(x)  (IRQ_CHAINED_GPIOD(32) + x)
+#define IRQ_CHAINED_TIMERX(x) (IRQ_CHAINED_GPIOE(32) + x)
+#define IRQ_TIMER1            (IRQ_CHAINED_TIMERX(0))
+#define IRQ_TIMER2            (IRQ_CHAINED_TIMERX(1))
+#define IRQ_TIMER64B          (IRQ_CHAINED_TIMERX(2))
+
+#define NR_IRQS		(IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS))
+
+/* Enable mask for multiplexed interrupts */
+#define IRQ_ENA_MUX	(1<<IRQ_TIMERX) | (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) | \
+			(1<<IRQ_GPIOC) 	| (1<<IRQ_GPIOD) | (1<<IRQ_GPIOE) | \
+			(1<<IRQ_TIMERX)
+
+#else
+#error cpu definition mismatch
+#endif
+
+/* decode irq number to register number */
+#define IRQ_TO_REGNO(irq) ((irq - NR_GLBL_IRQS) >> 5)
+#define IRQ_TO_BIT(irq) (1 << ((irq - NR_GLBL_IRQS) % 32))
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/memory.h b/arch/arm/mach-h720x/include/mach/memory.h
new file mode 100644
index 0000000..cb26f49
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/memory.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-h720x/include/mach/memory.h
+ *
+ * Copyright (c) 2000 Jungjun Kim
+ *
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Page offset:
+ *    ( 0xc0000000UL )
+ */
+#define PHYS_OFFSET	UL(0x40000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ *
+ * There is something to do here later !, Mar 2000, Jungjun Kim
+ */
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h
new file mode 100644
index 0000000..e4a7c76
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/system.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-h720x/include/mach/system.h
+ *
+ * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * arch/arm/mach-h720x/include/mach/system.h
+ *
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+#include <mach/hardware.h>
+
+static void arch_idle(void)
+{
+	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
+	nop();
+	nop();
+	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
+	nop();
+	nop();
+}
+
+
+static __inline__ void arch_reset(char mode)
+{
+	CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
+}
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/timex.h b/arch/arm/mach-h720x/include/mach/timex.h
new file mode 100644
index 0000000..3f2f447
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/timex.h
@@ -0,0 +1,15 @@
+/*
+ * arch/arm/mach-h720x/include/mach/timex.h
+ * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX
+#define __ASM_ARCH_TIMEX
+
+#define CLOCK_TICK_RATE		3686400
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/uncompress.h b/arch/arm/mach-h720x/include/mach/uncompress.h
new file mode 100644
index 0000000..d662323
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-h720x/include/mach/uncompress.h
+ *
+ * Copyright (C) 2001-2002 Jungjun Kim
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/hardware.h>
+
+#define LSR 	0x14
+#define TEMPTY 	0x40
+
+static inline void putc(int c)
+{
+	volatile unsigned char *p = (volatile unsigned char *)(IO_PHYS+0x20000);
+
+	/* wait until transmit buffer is empty */
+	while((p[LSR] & TEMPTY) == 0x0)
+		barrier();
+
+	/* write next character */
+	*p = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/vmalloc.h b/arch/arm/mach-h720x/include/mach/vmalloc.h
new file mode 100644
index 0000000..ff1460d
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-h720x/include/mach/vmalloc.h
+ */
+
+#ifndef __ARCH_ARM_VMALLOC_H
+#define __ARCH_ARM_VMALLOC_H
+
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+
+#endif
diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c
index 8915a5f..4b4230d 100644
--- a/arch/arm/mach-imx/clock.c
+++ b/arch/arm/mach-imx/clock.c
@@ -23,7 +23,7 @@
 #include <linux/err.h>
 
 #include <asm/io.h>
-#include <asm/arch/imx-regs.h>
+#include <mach/imx-regs.h>
 
 /*
  * Very simple approach: We can't disable clocks, so we do
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
index 3fee1ac..434b4ca 100644
--- a/arch/arm/mach-imx/cpufreq.c
+++ b/arch/arm/mach-imx/cpufreq.c
@@ -36,7 +36,7 @@
 #include <linux/err.h>
 #include <asm/system.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c
index 17a43ba..c10810c9 100644
--- a/arch/arm/mach-imx/dma.c
+++ b/arch/arm/mach-imx/dma.c
@@ -30,9 +30,9 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
-#include <asm/arch/imx-dma.h>
+#include <mach/imx-dma.h>
 
 struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
 
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index df77665..fa72174 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -29,13 +29,13 @@
 #include <linux/string.h>
 
 #include <asm/errno.h>
-#include <asm/arch/imxfb.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/imx-regs.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/imx-regs.h>
 
 #include <asm/mach/map.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
 
 unsigned long imx_gpio_alloc_map[(GPIO_PORT_MAX + 1) * 32 / BITS_PER_LONG];
 
diff --git a/arch/arm/mach-imx/include/mach/debug-macro.S b/arch/arm/mach-imx/include/mach/debug-macro.S
new file mode 100644
index 0000000..87802bbf
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/debug-macro.S
@@ -0,0 +1,34 @@
+/* arch/arm/mach-imx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x00000000	@ physical
+		movne	\rx, #0xe0000000	@ virtual
+		orreq	\rx, \rx, #0x00200000	@ physical
+		orr	\rx, \rx, #0x00006000	@ UART1 offset
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x40]	@ TXDATA
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x98]	@ SR2
+		tst	\rd, #1 << 3		@ TXDC
+		beq	1002b			@ wait until transmit done
+		.endm
diff --git a/include/asm-arm/arch-imx/dma.h b/arch/arm/mach-imx/include/mach/dma.h
similarity index 100%
rename from include/asm-arm/arch-imx/dma.h
rename to arch/arm/mach-imx/include/mach/dma.h
diff --git a/arch/arm/mach-imx/include/mach/entry-macro.S b/arch/arm/mach-imx/include/mach/entry-macro.S
new file mode 100644
index 0000000..e4db679
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-imx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for iMX-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro	arch_ret_to_user, tmp1, tmp2
+		.endm
+
+#define AITC_NIVECSR   0x40
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =IO_ADDRESS(IMX_AITC_BASE)
+		@ Load offset & priority of the highest priority
+		@ interrupt pending.
+		ldr	\irqstat, [\base, #AITC_NIVECSR]
+		@ Shift off the priority leaving the offset or
+		@ "interrupt number", use arithmetic shift to
+		@ transform illegal source (0xffff) as -1
+		mov	\irqnr, \irqstat, asr #16
+		adds	\tmp, \irqnr, #1
+		.endm
diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h
new file mode 100644
index 0000000..6e3d795
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/gpio.h
@@ -0,0 +1,102 @@
+#ifndef _IMX_GPIO_H
+
+#include <mach/imx-regs.h>
+
+#define IMX_GPIO_ALLOC_MODE_NORMAL	0
+#define IMX_GPIO_ALLOC_MODE_NO_ALLOC	1
+#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC	2
+#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY	4
+#define IMX_GPIO_ALLOC_MODE_RELEASE	8
+
+extern int imx_gpio_request(unsigned gpio, const char *label);
+
+extern void imx_gpio_free(unsigned gpio);
+
+extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+					int alloc_mode, const char *label);
+
+extern int imx_gpio_direction_input(unsigned gpio);
+
+extern int imx_gpio_direction_output(unsigned gpio, int value);
+
+extern void __imx_gpio_set_value(unsigned gpio, int value);
+
+static inline int imx_gpio_get_value(unsigned gpio)
+{
+	return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK));
+}
+
+static inline void imx_gpio_set_value_inline(unsigned gpio, int value)
+{
+	unsigned long flags;
+
+	raw_local_irq_save(flags);
+	if(value)
+		DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK));
+	else
+		DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK));
+	raw_local_irq_restore(flags);
+}
+
+static inline void imx_gpio_set_value(unsigned gpio, int value)
+{
+	if(__builtin_constant_p(gpio))
+		imx_gpio_set_value_inline(gpio, value);
+	else
+		__imx_gpio_set_value(gpio, value);
+}
+
+extern int imx_gpio_to_irq(unsigned gpio);
+
+extern int imx_irq_to_gpio(unsigned irq);
+
+/*-------------------------------------------------------------------------*/
+
+/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions
+ * to allow future extension of GPIO logic.
+ */
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	return imx_gpio_request(gpio, label);
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+	imx_gpio_free(gpio);
+}
+
+static inline  int gpio_direction_input(unsigned gpio)
+{
+	return imx_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	return imx_gpio_direction_output(gpio, value);
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return imx_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	imx_gpio_set_value(gpio, value);
+}
+
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return imx_gpio_to_irq(gpio);
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return imx_irq_to_gpio(irq);
+}
+
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/hardware.h b/arch/arm/mach-imx/include/mach/hardware.h
new file mode 100644
index 0000000..c73e9e7
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/hardware.h
@@ -0,0 +1,91 @@
+/*
+ *  arch/arm/mach-imx/include/mach/hardware.h
+ *
+ *  Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include "imx-regs.h"
+
+#ifndef __ASSEMBLY__
+# define __REG(x)	(*((volatile u32 *)IO_ADDRESS(x)))
+
+# define __REG2(x,y)        (*(volatile u32 *)((u32)&__REG(x) + (y)))
+#endif
+
+/*
+ * Memory map
+ */
+
+#define IMX_IO_PHYS		0x00200000
+#define IMX_IO_SIZE		0x00100000
+#define IMX_IO_BASE		0xe0000000
+
+#define IMX_CS0_PHYS		0x10000000
+#define IMX_CS0_SIZE		0x02000000
+#define IMX_CS0_VIRT		0xe8000000
+
+#define IMX_CS1_PHYS		0x12000000
+#define IMX_CS1_SIZE		0x01000000
+#define IMX_CS1_VIRT		0xea000000
+
+#define IMX_CS2_PHYS		0x13000000
+#define IMX_CS2_SIZE		0x01000000
+#define IMX_CS2_VIRT		0xeb000000
+
+#define IMX_CS3_PHYS		0x14000000
+#define IMX_CS3_SIZE		0x01000000
+#define IMX_CS3_VIRT		0xec000000
+
+#define IMX_CS4_PHYS		0x15000000
+#define IMX_CS4_SIZE		0x01000000
+#define IMX_CS4_VIRT		0xed000000
+
+#define IMX_CS5_PHYS		0x16000000
+#define IMX_CS5_SIZE		0x01000000
+#define IMX_CS5_VIRT		0xee000000
+
+#define IMX_FB_VIRT		0xF1000000
+#define IMX_FB_SIZE		(256*1024)
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
+
+#ifndef __ASSEMBLY__
+/*
+ * Handy routine to set GPIO functions
+ */
+extern void imx_gpio_mode( int gpio_mode );
+
+#endif
+
+#define MAXIRQNUM                       62
+#define MAXFIQNUM                       62
+#define MAXSWINUM                       62
+
+/*
+ * Use SDRAM for memory
+ */
+#define MEM_SIZE		0x01000000
+
+#ifdef CONFIG_ARCH_MX1ADS
+#include "mx1ads.h"
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-imx/imx-dma.h b/arch/arm/mach-imx/include/mach/imx-dma.h
similarity index 100%
rename from include/asm-arm/arch-imx/imx-dma.h
rename to arch/arm/mach-imx/include/mach/imx-dma.h
diff --git a/include/asm-arm/arch-imx/imx-regs.h b/arch/arm/mach-imx/include/mach/imx-regs.h
similarity index 100%
rename from include/asm-arm/arch-imx/imx-regs.h
rename to arch/arm/mach-imx/include/mach/imx-regs.h
diff --git a/include/asm-arm/arch-imx/imx-uart.h b/arch/arm/mach-imx/include/mach/imx-uart.h
similarity index 100%
rename from include/asm-arm/arch-imx/imx-uart.h
rename to arch/arm/mach-imx/include/mach/imx-uart.h
diff --git a/include/asm-arm/arch-imx/imxfb.h b/arch/arm/mach-imx/include/mach/imxfb.h
similarity index 100%
rename from include/asm-arm/arch-imx/imxfb.h
rename to arch/arm/mach-imx/include/mach/imxfb.h
diff --git a/arch/arm/mach-imx/include/mach/io.h b/arch/arm/mach-imx/include/mach/io.h
new file mode 100644
index 0000000..c50c5fa
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/io.h
@@ -0,0 +1,30 @@
+/*
+ *  arch/arm/mach-imxads/include/mach/io.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)		((void __iomem *)(a))
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/irqs.h b/arch/arm/mach-imx/include/mach/irqs.h
new file mode 100644
index 0000000..eb8d5bd
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/irqs.h
@@ -0,0 +1,116 @@
+/*
+ *  arch/arm/mach-imxads/include/mach/irqs.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ARM_IRQS_H__
+#define __ARM_IRQS_H__
+
+/* Use the imx definitions */
+#include <mach/hardware.h>
+
+/*
+ *  IMX Interrupt numbers
+ *
+ */
+#define INT_SOFTINT                 0
+#define CSI_INT                     6
+#define DSPA_MAC_INT                7
+#define DSPA_INT                    8
+#define COMP_INT                    9
+#define MSHC_XINT                   10
+#define GPIO_INT_PORTA              11
+#define GPIO_INT_PORTB              12
+#define GPIO_INT_PORTC              13
+#define LCDC_INT                    14
+#define SIM_INT                     15
+#define SIM_DATA_INT                16
+#define RTC_INT                     17
+#define RTC_SAMINT                  18
+#define UART2_MINT_PFERR            19
+#define UART2_MINT_RTS              20
+#define UART2_MINT_DTR              21
+#define UART2_MINT_UARTC            22
+#define UART2_MINT_TX               23
+#define UART2_MINT_RX               24
+#define UART1_MINT_PFERR            25
+#define UART1_MINT_RTS              26
+#define UART1_MINT_DTR              27
+#define UART1_MINT_UARTC            28
+#define UART1_MINT_TX               29
+#define UART1_MINT_RX               30
+#define VOICE_DAC_INT               31
+#define VOICE_ADC_INT               32
+#define PEN_DATA_INT                33
+#define PWM_INT                     34
+#define SDHC_INT                    35
+#define I2C_INT                     39
+#define CSPI_INT                    41
+#define SSI_TX_INT                  42
+#define SSI_TX_ERR_INT              43
+#define SSI_RX_INT                  44
+#define SSI_RX_ERR_INT              45
+#define TOUCH_INT                   46
+#define USBD_INT0                   47
+#define USBD_INT1                   48
+#define USBD_INT2                   49
+#define USBD_INT3                   50
+#define USBD_INT4                   51
+#define USBD_INT5                   52
+#define USBD_INT6                   53
+#define BTSYS_INT                   55
+#define BTTIM_INT                   56
+#define BTWUI_INT                   57
+#define TIM2_INT                    58
+#define TIM1_INT                    59
+#define DMA_ERR                     60
+#define DMA_INT                     61
+#define GPIO_INT_PORTD              62
+
+#define IMX_IRQS                         (64)
+
+/* note: the IMX has four gpio ports (A-D), but only
+ *       the following pins are connected to the outside
+ *       world:
+ *
+ * PORT A: bits 0-31
+ * PORT B: bits 8-31
+ * PORT C: bits 3-17
+ * PORT D: bits 6-31
+ *
+ * We map these interrupts straight on. As a result we have
+ * several holes in the interrupt mapping. We do this for two
+ * reasons:
+ *   - mapping the interrupts without holes would get
+ *     far more complicated
+ *   - Motorola could well decide to bring some processor
+ *     with more pins connected
+ */
+
+#define IRQ_GPIOA(x)  (IMX_IRQS + x)
+#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
+#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
+#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
+
+/* decode irq number to use with IMR(x), ISR(x) and friends */
+#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
+
+#define NR_IRQS (IRQ_GPIOD(32) + 1)
+#define IRQ_GPIO(x)
+#endif
diff --git a/arch/arm/mach-imx/include/mach/memory.h b/arch/arm/mach-imx/include/mach/memory.h
new file mode 100644
index 0000000..5c45306
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/memory.h
@@ -0,0 +1,36 @@
+/*
+ *  arch/arm/mach-imx/include/mach/memory.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MMU_H
+#define __ASM_ARCH_MMU_H
+
+#define PHYS_OFFSET	UL(0x08000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	(x - PAGE_OFFSET + PHYS_OFFSET)
+#define __bus_to_virt(x)	(x - PHYS_OFFSET + PAGE_OFFSET)
+
+#endif
diff --git a/include/asm-arm/arch-imx/mmc.h b/arch/arm/mach-imx/include/mach/mmc.h
similarity index 100%
rename from include/asm-arm/arch-imx/mmc.h
rename to arch/arm/mach-imx/include/mach/mmc.h
diff --git a/arch/arm/mach-imx/include/mach/mx1ads.h b/arch/arm/mach-imx/include/mach/mx1ads.h
new file mode 100644
index 0000000..def05d5
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/mx1ads.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-imx/include/mach/mx1ads.h
+ *
+ * Copyright (C) 2004 Robert Schwebel, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef __ASM_ARCH_MX1ADS_H
+#define __ASM_ARCH_MX1ADS_H
+
+/* ------------------------------------------------------------------------ */
+/* Memory Map for the M9328MX1ADS (MX1ADS) Board                            */
+/* ------------------------------------------------------------------------ */
+
+#define MX1ADS_FLASH_PHYS		0x10000000
+#define MX1ADS_FLASH_SIZE		(16*1024*1024)
+
+#define IMX_FB_PHYS			(0x0C000000 - 0x40000)
+
+#define CLK32 32000
+
+#endif /* __ASM_ARCH_MX1ADS_H */
diff --git a/arch/arm/mach-imx/include/mach/spi_imx.h b/arch/arm/mach-imx/include/mach/spi_imx.h
new file mode 100644
index 0000000..4186430
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/spi_imx.h
@@ -0,0 +1,72 @@
+/*
+ * arch/arm/mach-imx/include/mach/spi_imx.h
+ *
+ * Copyright (C) 2006 SWAPP
+ *	Andrea Paterniani <a.paterniani@swapp-eng.it>
+ *
+ * Initial version inspired by:
+ *	linux-2.6.17-rc3-mm1/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef SPI_IMX_H_
+#define SPI_IMX_H_
+
+
+/*-------------------------------------------------------------------------*/
+/**
+ * struct spi_imx_master - device.platform_data for SPI controller devices.
+ * @num_chipselect: chipselects are used to distinguish individual
+ *	SPI slaves, and are numbered from zero to num_chipselects - 1.
+ *	each slave has a chipselect signal, but it's common that not
+ *	every chipselect is connected to a slave.
+ * @enable_dma: if true enables DMA driven transfers.
+*/
+struct spi_imx_master {
+	u8 num_chipselect;
+	u8 enable_dma:1;
+};
+/*-------------------------------------------------------------------------*/
+
+
+/*-------------------------------------------------------------------------*/
+/**
+ * struct spi_imx_chip - spi_board_info.controller_data for SPI
+ * slave devices, copied to spi_device.controller_data.
+ * @enable_loopback : used for test purpouse to internally connect RX and TX
+ *	sections.
+ * @enable_dma : enables dma transfer (provided that controller driver has
+ *	dma enabled too).
+ * @ins_ss_pulse : enable /SS pulse insertion between SPI burst.
+ * @bclk_wait : number of bclk waits between each bits_per_word SPI burst.
+ * @cs_control : function pointer to board-specific function to assert/deassert
+ *	I/O port to control HW generation of devices chip-select.
+*/
+struct spi_imx_chip {
+	u8	enable_loopback:1;
+	u8	enable_dma:1;
+	u8	ins_ss_pulse:1;
+	u16	bclk_wait:15;
+	void (*cs_control)(u32 control);
+};
+
+/* Chip-select state */
+#define SPI_CS_ASSERT			(1 << 0)
+#define SPI_CS_DEASSERT			(1 << 1)
+/*-------------------------------------------------------------------------*/
+
+
+#endif /* SPI_IMX_H_*/
diff --git a/arch/arm/mach-imx/include/mach/system.h b/arch/arm/mach-imx/include/mach/system.h
new file mode 100644
index 0000000..adee7e5
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/system.h
@@ -0,0 +1,40 @@
+/*
+ *  arch/arm/mach-imxads/include/mach/system.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static void
+arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void
+arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif
diff --git a/include/asm-arm/arch-imx/timex.h b/arch/arm/mach-imx/include/mach/timex.h
similarity index 100%
rename from include/asm-arm/arch-imx/timex.h
rename to arch/arm/mach-imx/include/mach/timex.h
diff --git a/arch/arm/mach-imx/include/mach/uncompress.h b/arch/arm/mach-imx/include/mach/uncompress.h
new file mode 100644
index 0000000..70523e67
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/uncompress.h
@@ -0,0 +1,71 @@
+/*
+ *  arch/arm/mach-imxads/include/mach/uncompress.h
+ *
+ *
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+
+#define UART1_BASE 0x206000
+#define UART2_BASE 0x207000
+#define USR2 0x98
+#define USR2_TXFE (1<<14)
+#define TXR  0x40
+#define UCR1 0x80
+#define UCR1_UARTEN 1
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  We search for the first enabled
+ * port in the most probable order.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+	unsigned long serial_port;
+
+	do {
+		serial_port = UART1_BASE;
+		if ( UART(UCR1) & UCR1_UARTEN )
+			break;
+		serial_port = UART2_BASE;
+		if ( UART(UCR1) & UCR1_UARTEN )
+			break;
+		return;
+	} while(0);
+
+	while (!(UART(USR2) & USR2_TXFE))
+		barrier();
+
+	UART(TXR) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-imx/include/mach/vmalloc.h b/arch/arm/mach-imx/include/mach/vmalloc.h
new file mode 100644
index 0000000..7d7cb0b
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-imx/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
index 167b7fc..798f221 100644
--- a/arch/arm/mach-imx/irq.c
+++ b/arch/arm/mach-imx/irq.c
@@ -27,7 +27,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
diff --git a/arch/arm/mach-imx/leds-mx1ads.c b/arch/arm/mach-imx/leds-mx1ads.c
index 8757d37..af81621 100644
--- a/arch/arm/mach-imx/leds-mx1ads.c
+++ b/arch/arm/mach-imx/leds-mx1ads.c
@@ -13,7 +13,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/io.h>
 #include <asm/leds.h>
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
index baf5e2f..87fa1ff 100644
--- a/arch/arm/mach-imx/mx1ads.c
+++ b/arch/arm/mach-imx/mx1ads.c
@@ -16,7 +16,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -25,8 +25,8 @@
 #include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/mmc.h>
+#include <mach/imx-uart.h>
 #include <linux/interrupt.h>
 #include "generic.h"
 
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index 7fc6d2c..08be387 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -19,7 +19,7 @@
 #include <linux/clockchips.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index f439bf1..8bacf6d4 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -20,11 +20,11 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/hardware/arm_timer.h>
-#include <asm/arch/cm.h>
+#include <mach/cm.h>
 #include <asm/system.h>
 #include <asm/leds.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c
index afa0f21..ce5ea7c 100644
--- a/arch/arm/mach-integrator/cpu.c
+++ b/arch/arm/mach-integrator/cpu.c
@@ -20,7 +20,7 @@
 #include <linux/smp.h>
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/icst525.h>
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 5a1588c..0a7b326 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -23,8 +23,8 @@
 
 #include <asm/io.h>
 #include <asm/hardware/icst525.h>
-#include <asm/arch/lm.h>
-#include <asm/arch/impd1.h>
+#include <mach/lm.h>
+#include <mach/impd1.h>
 #include <asm/sizes.h>
 
 #include "clock.h"
diff --git a/include/asm-arm/arch-integrator/bits.h b/arch/arm/mach-integrator/include/mach/bits.h
similarity index 100%
rename from include/asm-arm/arch-integrator/bits.h
rename to arch/arm/mach-integrator/include/mach/bits.h
diff --git a/include/asm-arm/arch-integrator/cm.h b/arch/arm/mach-integrator/include/mach/cm.h
similarity index 100%
rename from include/asm-arm/arch-integrator/cm.h
rename to arch/arm/mach-integrator/include/mach/cm.h
diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S
new file mode 100644
index 0000000..d347d65
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/* arch/arm/mach-integrator/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x16000000	@ physical base address
+		movne	\rx, #0xf0000000	@ virtual base
+		addne	\rx, \rx, #0x16000000 >> 4
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-integrator/include/mach/dma.h b/arch/arm/mach-integrator/include/mach/dma.h
new file mode 100644
index 0000000..fbebe85
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/dma.h
@@ -0,0 +1,19 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/dma.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-integrator/include/mach/entry-macro.S b/arch/arm/mach-integrator/include/mach/entry-macro.S
new file mode 100644
index 0000000..7649c57
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/entry-macro.S
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/mach-integrator/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Integrator platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+ 		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+/* FIXME: should not be using soo many LDRs here */
+		ldr	\base, =IO_ADDRESS(INTEGRATOR_IC_BASE)
+		mov	\irqnr, #IRQ_PIC_START
+		ldr	\irqstat, [\base, #IRQ_STATUS]		@ get masked status
+		ldr	\base, =IO_ADDRESS(INTEGRATOR_HDR_BASE)
+		teq	\irqstat, #0
+		ldreq	\irqstat, [\base, #(INTEGRATOR_HDR_IC_OFFSET+IRQ_STATUS)]
+		moveq	\irqnr, #IRQ_CIC_START
+
+1001:		tst	\irqstat, #15
+		bne	1002f
+		add	\irqnr, \irqnr, #4
+		movs	\irqstat, \irqstat, lsr #4
+		bne	1001b
+1002:		tst	\irqstat, #1
+		bne	1003f
+		add	\irqnr, \irqnr, #1
+		movs	\irqstat, \irqstat, lsr #1
+		bne	1002b
+1003:		/* EQ will be set if no irqs pending */
+		.endm
+
diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h
new file mode 100644
index 0000000..1251319
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/hardware.h
@@ -0,0 +1,48 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/hardware.h
+ *
+ *  This file contains the hardware definitions of the Integrator.
+ *
+ *  Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/platform.h>
+
+/*
+ * Where in virtual memory the IO devices (timers, system controllers
+ * and so on)
+ */
+#define IO_BASE			0xF0000000                 // VA of IO 
+#define IO_SIZE			0x0B000000                 // How much?
+#define IO_START		INTEGRATOR_HDR_BASE        // PA of IO
+
+#define PCIO_BASE		PCI_IO_VADDR
+#define PCIMEM_BASE		PCI_MEMORY_VADDR
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) 
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO		0x6000
+#define PCIBIOS_MIN_MEM 	0x00100000
+
+#endif
+
diff --git a/include/asm-arm/arch-integrator/impd1.h b/arch/arm/mach-integrator/include/mach/impd1.h
similarity index 100%
rename from include/asm-arm/arch-integrator/impd1.h
rename to arch/arm/mach-integrator/include/mach/impd1.h
diff --git a/arch/arm/mach-integrator/include/mach/io.h b/arch/arm/mach-integrator/include/mach/io.h
new file mode 100644
index 0000000..f21bb54
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/io.h
@@ -0,0 +1,36 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/io.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffff
+
+/*
+ * WARNING: this has to mirror definitions in platform.h
+ */
+#define PCI_MEMORY_VADDR        0xe8000000
+#define PCI_CONFIG_VADDR        0xec000000
+#define PCI_V3_VADDR            0xed000000
+#define PCI_IO_VADDR            0xee000000
+
+#define __io(a)			((void __iomem *)(PCI_IO_VADDR + (a)))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-integrator/include/mach/irqs.h b/arch/arm/mach-integrator/include/mach/irqs.h
new file mode 100644
index 0000000..1fbe6d1
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/irqs.h
@@ -0,0 +1,82 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/irqs.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/* 
+ *  Interrupt numbers
+ */
+#define IRQ_PIC_START			0
+#define IRQ_SOFTINT			0
+#define IRQ_UARTINT0			1
+#define IRQ_UARTINT1			2
+#define IRQ_KMIINT0			3
+#define IRQ_KMIINT1			4
+#define IRQ_TIMERINT0			5
+#define IRQ_TIMERINT1			6
+#define IRQ_TIMERINT2			7
+#define IRQ_RTCINT			8
+#define IRQ_AP_EXPINT0			9
+#define IRQ_AP_EXPINT1			10
+#define IRQ_AP_EXPINT2			11
+#define IRQ_AP_EXPINT3			12
+#define IRQ_AP_PCIINT0			13
+#define IRQ_AP_PCIINT1			14
+#define IRQ_AP_PCIINT2			15
+#define IRQ_AP_PCIINT3			16
+#define IRQ_AP_V3INT			17
+#define IRQ_AP_CPINT0			18
+#define IRQ_AP_CPINT1			19
+#define IRQ_AP_LBUSTIMEOUT 		20
+#define IRQ_AP_APCINT			21
+#define IRQ_CP_CLCDCINT			22
+#define IRQ_CP_MMCIINT0			23
+#define IRQ_CP_MMCIINT1			24
+#define IRQ_CP_AACIINT			25
+#define IRQ_CP_CPPLDINT			26
+#define IRQ_CP_ETHINT			27
+#define IRQ_CP_TSPENINT			28
+#define IRQ_PIC_END			31
+
+#define IRQ_CIC_START			32
+#define IRQ_CM_SOFTINT			32
+#define IRQ_CM_COMMRX			33
+#define IRQ_CM_COMMTX			34
+#define IRQ_CIC_END			34
+
+/*
+ * IntegratorCP only
+ */
+#define IRQ_SIC_START			35
+#define IRQ_SIC_CP_SOFTINT		35
+#define IRQ_SIC_CP_RI0			36
+#define IRQ_SIC_CP_RI1			37
+#define IRQ_SIC_CP_CARDIN		38
+#define IRQ_SIC_CP_LMINT0		39
+#define IRQ_SIC_CP_LMINT1		40
+#define IRQ_SIC_CP_LMINT2		41
+#define IRQ_SIC_CP_LMINT3		42
+#define IRQ_SIC_CP_LMINT4		43
+#define IRQ_SIC_CP_LMINT5		44
+#define IRQ_SIC_CP_LMINT6		45
+#define IRQ_SIC_CP_LMINT7		46
+#define IRQ_SIC_END			46
+
+#define NR_IRQS                         47
+
diff --git a/include/asm-arm/arch-integrator/lm.h b/arch/arm/mach-integrator/include/mach/lm.h
similarity index 100%
rename from include/asm-arm/arch-integrator/lm.h
rename to arch/arm/mach-integrator/include/mach/lm.h
diff --git a/arch/arm/mach-integrator/include/mach/memory.h b/arch/arm/mach-integrator/include/mach/memory.h
new file mode 100644
index 0000000..be7e63c
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/memory.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/memory.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+#define BUS_OFFSET	UL(0x80000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	(x - PAGE_OFFSET + BUS_OFFSET)
+#define __bus_to_virt(x)	(x - BUS_OFFSET + PAGE_OFFSET)
+
+#endif
diff --git a/include/asm-arm/arch-integrator/platform.h b/arch/arm/mach-integrator/include/mach/platform.h
similarity index 100%
rename from include/asm-arm/arch-integrator/platform.h
rename to arch/arm/mach-integrator/include/mach/platform.h
diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h
new file mode 100644
index 0000000..c485345
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/system.h
@@ -0,0 +1,44 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/system.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/cm.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
+}
+
+#endif
diff --git a/arch/arm/mach-integrator/include/mach/timex.h b/arch/arm/mach-integrator/include/mach/timex.h
new file mode 100644
index 0000000..1dcb420
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/timex.h
@@ -0,0 +1,26 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/timex.h
+ *
+ *  Integrator architecture timex specifications
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * ??
+ */
+#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/arch/arm/mach-integrator/include/mach/uncompress.h b/arch/arm/mach-integrator/include/mach/uncompress.h
new file mode 100644
index 0000000..30452f0
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/uncompress.h
@@ -0,0 +1,50 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define AMBA_UART_DR	(*(volatile unsigned char *)0x16000000)
+#define AMBA_UART_LCRH	(*(volatile unsigned char *)0x16000008)
+#define AMBA_UART_LCRM	(*(volatile unsigned char *)0x1600000c)
+#define AMBA_UART_LCRL	(*(volatile unsigned char *)0x16000010)
+#define AMBA_UART_CR	(*(volatile unsigned char *)0x16000014)
+#define AMBA_UART_FR	(*(volatile unsigned char *)0x16000018)
+
+/*
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+	while (AMBA_UART_FR & (1 << 5))
+		barrier();
+
+	AMBA_UART_DR = c;
+}
+
+static inline void flush(void)
+{
+	while (AMBA_UART_FR & (1 << 3))
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-integrator/include/mach/vmalloc.h b/arch/arm/mach-integrator/include/mach/vmalloc.h
new file mode 100644
index 0000000..e87ab0b
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 3996ddc..6e472b5 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -28,14 +28,14 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/kmi.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/param.h>		/* HZ */
 #include <asm/mach-types.h>
 
-#include <asm/arch/lm.h>
+#include <mach/lm.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 28d3301..6b99e9c 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -20,15 +20,15 @@
 #include <linux/amba/kmi.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/icst525.h>
 
-#include <asm/arch/cm.h>
-#include <asm/arch/lm.h>
+#include <mach/cm.h>
+#include <mach/lm.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index 6062180..7bc68814 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -25,12 +25,12 @@
 #include <linux/smp.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
-#include <asm/arch/cm.h>
+#include <mach/cm.h>
 
 static int saved_leds;
 
diff --git a/arch/arm/mach-integrator/lm.c b/arch/arm/mach-integrator/lm.c
index f939c50..f52c7af 100644
--- a/arch/arm/mach-integrator/lm.c
+++ b/arch/arm/mach-integrator/lm.c
@@ -12,7 +12,7 @@
 #include <linux/device.h>
 #include <linux/slab.h>
 
-#include <asm/arch/lm.h>
+#include <mach/lm.h>
 
 #define to_lm_device(d)	container_of(d, struct lm_device, dev)
 #define to_lm_driver(d)	container_of(d, struct lm_driver, drv)
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index b8685d9..9f2b1ea 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -28,7 +28,7 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-iop13xx/include/mach/adma.h b/arch/arm/mach-iop13xx/include/mach/adma.h
new file mode 100644
index 0000000..60019c8
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/adma.h
@@ -0,0 +1,537 @@
+/*
+ * Copyright(c) 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#ifndef _ADMA_H
+#define _ADMA_H
+#include <linux/types.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <asm/hardware/iop_adma.h>
+
+#define ADMA_ACCR(chan)	(chan->mmr_base + 0x0)
+#define ADMA_ACSR(chan)	(chan->mmr_base + 0x4)
+#define ADMA_ADAR(chan)	(chan->mmr_base + 0x8)
+#define ADMA_IIPCR(chan)	(chan->mmr_base + 0x18)
+#define ADMA_IIPAR(chan)	(chan->mmr_base + 0x1c)
+#define ADMA_IIPUAR(chan)	(chan->mmr_base + 0x20)
+#define ADMA_ANDAR(chan)	(chan->mmr_base + 0x24)
+#define ADMA_ADCR(chan)	(chan->mmr_base + 0x28)
+#define ADMA_CARMD(chan)	(chan->mmr_base + 0x2c)
+#define ADMA_ABCR(chan)	(chan->mmr_base + 0x30)
+#define ADMA_DLADR(chan)	(chan->mmr_base + 0x34)
+#define ADMA_DUADR(chan)	(chan->mmr_base + 0x38)
+#define ADMA_SLAR(src, chan)	(chan->mmr_base + (0x3c + (src << 3)))
+#define ADMA_SUAR(src, chan)	(chan->mmr_base + (0x40 + (src << 3)))
+
+struct iop13xx_adma_src {
+	u32 src_addr;
+	union {
+		u32 upper_src_addr;
+		struct {
+			unsigned int pq_upper_src_addr:24;
+			unsigned int pq_dmlt:8;
+		};
+	};
+};
+
+struct iop13xx_adma_desc_ctrl {
+	unsigned int int_en:1;
+	unsigned int xfer_dir:2;
+	unsigned int src_select:4;
+	unsigned int zero_result:1;
+	unsigned int block_fill_en:1;
+	unsigned int crc_gen_en:1;
+	unsigned int crc_xfer_dis:1;
+	unsigned int crc_seed_fetch_dis:1;
+	unsigned int status_write_back_en:1;
+	unsigned int endian_swap_en:1;
+	unsigned int reserved0:2;
+	unsigned int pq_update_xfer_en:1;
+	unsigned int dual_xor_en:1;
+	unsigned int pq_xfer_en:1;
+	unsigned int p_xfer_dis:1;
+	unsigned int reserved1:10;
+	unsigned int relax_order_en:1;
+	unsigned int no_snoop_en:1;
+};
+
+struct iop13xx_adma_byte_count {
+	unsigned int byte_count:24;
+	unsigned int host_if:3;
+	unsigned int reserved:2;
+	unsigned int zero_result_err_q:1;
+	unsigned int zero_result_err:1;
+	unsigned int tx_complete:1;
+};
+
+struct iop13xx_adma_desc_hw {
+	u32 next_desc;
+	union {
+		u32 desc_ctrl;
+		struct iop13xx_adma_desc_ctrl desc_ctrl_field;
+	};
+	union {
+		u32 crc_addr;
+		u32 block_fill_data;
+		u32 q_dest_addr;
+	};
+	union {
+		u32 byte_count;
+		struct iop13xx_adma_byte_count byte_count_field;
+	};
+	union {
+		u32 dest_addr;
+		u32 p_dest_addr;
+	};
+	union {
+		u32 upper_dest_addr;
+		u32 pq_upper_dest_addr;
+	};
+	struct iop13xx_adma_src src[1];
+};
+
+struct iop13xx_adma_desc_dual_xor {
+	u32 next_desc;
+	u32 desc_ctrl;
+	u32 reserved;
+	u32 byte_count;
+	u32 h_dest_addr;
+	u32 h_upper_dest_addr;
+	u32 src0_addr;
+	u32 upper_src0_addr;
+	u32 src1_addr;
+	u32 upper_src1_addr;
+	u32 h_src_addr;
+	u32 h_upper_src_addr;
+	u32 d_src_addr;
+	u32 d_upper_src_addr;
+	u32 d_dest_addr;
+	u32 d_upper_dest_addr;
+};
+
+struct iop13xx_adma_desc_pq_update {
+	u32 next_desc;
+	u32 desc_ctrl;
+	u32 reserved;
+	u32 byte_count;
+	u32 p_dest_addr;
+	u32 p_upper_dest_addr;
+	u32 src0_addr;
+	u32 upper_src0_addr;
+	u32 src1_addr;
+	u32 upper_src1_addr;
+	u32 p_src_addr;
+	u32 p_upper_src_addr;
+	u32 q_src_addr;
+	struct {
+		unsigned int q_upper_src_addr:24;
+		unsigned int q_dmlt:8;
+	};
+	u32 q_dest_addr;
+	u32 q_upper_dest_addr;
+};
+
+static inline int iop_adma_get_max_xor(void)
+{
+	return 16;
+}
+
+static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
+{
+	return __raw_readl(ADMA_ADAR(chan));
+}
+
+static inline void iop_chan_set_next_descriptor(struct iop_adma_chan *chan,
+						u32 next_desc_addr)
+{
+	__raw_writel(next_desc_addr, ADMA_ANDAR(chan));
+}
+
+#define ADMA_STATUS_BUSY (1 << 13)
+
+static inline char iop_chan_is_busy(struct iop_adma_chan *chan)
+{
+	if (__raw_readl(ADMA_ACSR(chan)) &
+		ADMA_STATUS_BUSY)
+		return 1;
+	else
+		return 0;
+}
+
+static inline int
+iop_chan_get_desc_align(struct iop_adma_chan *chan, int num_slots)
+{
+	return 1;
+}
+#define iop_desc_is_aligned(x, y) 1
+
+static inline int
+iop_chan_memcpy_slot_count(size_t len, int *slots_per_op)
+{
+	*slots_per_op = 1;
+	return 1;
+}
+
+#define iop_chan_interrupt_slot_count(s, c) iop_chan_memcpy_slot_count(0, s)
+
+static inline int
+iop_chan_memset_slot_count(size_t len, int *slots_per_op)
+{
+	*slots_per_op = 1;
+	return 1;
+}
+
+static inline int
+iop_chan_xor_slot_count(size_t len, int src_cnt, int *slots_per_op)
+{
+	static const char slot_count_table[] = { 1, 2, 2, 2,
+						 2, 3, 3, 3,
+						 3, 4, 4, 4,
+						 4, 5, 5, 5,
+						};
+	*slots_per_op = slot_count_table[src_cnt - 1];
+	return *slots_per_op;
+}
+
+#define ADMA_MAX_BYTE_COUNT	(16 * 1024 * 1024)
+#define IOP_ADMA_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
+#define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
+#define IOP_ADMA_XOR_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
+#define iop_chan_zero_sum_slot_count(l, s, o) iop_chan_xor_slot_count(l, s, o)
+
+static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	return hw_desc->dest_addr;
+}
+
+static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	return hw_desc->byte_count_field.byte_count;
+}
+
+static inline u32 iop_desc_get_src_addr(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan,
+					int src_idx)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	return hw_desc->src[src_idx].src_addr;
+}
+
+static inline u32 iop_desc_get_src_count(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	return hw_desc->desc_ctrl_field.src_select + 1;
+}
+
+static inline void
+iop_desc_init_memcpy(struct iop_adma_desc_slot *desc, unsigned long flags)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop13xx_adma_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+	hw_desc->crc_addr = 0;
+}
+
+static inline void
+iop_desc_init_memset(struct iop_adma_desc_slot *desc, unsigned long flags)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop13xx_adma_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+	u_desc_ctrl.field.block_fill_en = 1;
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+	hw_desc->crc_addr = 0;
+}
+
+/* to do: support buffers larger than ADMA_MAX_BYTE_COUNT */
+static inline void
+iop_desc_init_xor(struct iop_adma_desc_slot *desc, int src_cnt,
+		  unsigned long flags)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop13xx_adma_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	u_desc_ctrl.field.src_select = src_cnt - 1;
+	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+	hw_desc->crc_addr = 0;
+
+}
+#define iop_desc_init_null_xor(d, s, i) iop_desc_init_xor(d, s, i)
+
+/* to do: support buffers larger than ADMA_MAX_BYTE_COUNT */
+static inline int
+iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
+		       unsigned long flags)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop13xx_adma_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	u_desc_ctrl.field.src_select = src_cnt - 1;
+	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+	u_desc_ctrl.field.zero_result = 1;
+	u_desc_ctrl.field.status_write_back_en = 1;
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+	hw_desc->crc_addr = 0;
+
+	return 1;
+}
+
+static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan,
+					u32 byte_count)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	hw_desc->byte_count = byte_count;
+}
+
+static inline void
+iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
+{
+	int slots_per_op = desc->slots_per_op;
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
+	int i = 0;
+
+	if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) {
+		hw_desc->byte_count = len;
+	} else {
+		do {
+			iter = iop_hw_desc_slot_idx(hw_desc, i);
+			iter->byte_count = IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
+			len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
+			i += slots_per_op;
+		} while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT);
+
+		if (len) {
+			iter = iop_hw_desc_slot_idx(hw_desc, i);
+			iter->byte_count = len;
+		}
+	}
+}
+
+
+static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan,
+					dma_addr_t addr)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	hw_desc->dest_addr = addr;
+	hw_desc->upper_dest_addr = 0;
+}
+
+static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc,
+					dma_addr_t addr)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	hw_desc->src[0].src_addr = addr;
+	hw_desc->src[0].upper_src_addr = 0;
+}
+
+static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc,
+					int src_idx, dma_addr_t addr)
+{
+	int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
+	int i = 0;
+
+	do {
+		iter = iop_hw_desc_slot_idx(hw_desc, i);
+		iter->src[src_idx].src_addr = addr;
+		iter->src[src_idx].upper_src_addr = 0;
+		slot_cnt -= slots_per_op;
+		if (slot_cnt) {
+			i += slots_per_op;
+			addr += IOP_ADMA_XOR_MAX_BYTE_COUNT;
+		}
+	} while (slot_cnt);
+}
+
+static inline void
+iop_desc_init_interrupt(struct iop_adma_desc_slot *desc,
+	struct iop_adma_chan *chan)
+{
+	iop_desc_init_memcpy(desc, 1);
+	iop_desc_set_byte_count(desc, chan, 0);
+	iop_desc_set_dest_addr(desc, chan, 0);
+	iop_desc_set_memcpy_src_addr(desc, 0);
+}
+
+#define iop_desc_set_zero_sum_src_addr iop_desc_set_xor_src_addr
+
+static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc,
+					u32 next_desc_addr)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	BUG_ON(hw_desc->next_desc);
+	hw_desc->next_desc = next_desc_addr;
+}
+
+static inline u32 iop_desc_get_next_desc(struct iop_adma_desc_slot *desc)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	return hw_desc->next_desc;
+}
+
+static inline void iop_desc_clear_next_desc(struct iop_adma_desc_slot *desc)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	hw_desc->next_desc = 0;
+}
+
+static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc,
+						u32 val)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	hw_desc->block_fill_data = val;
+}
+
+static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	struct iop13xx_adma_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
+	struct iop13xx_adma_byte_count byte_count = hw_desc->byte_count_field;
+
+	BUG_ON(!(byte_count.tx_complete && desc_ctrl.zero_result));
+
+	if (desc_ctrl.pq_xfer_en)
+		return byte_count.zero_result_err_q;
+	else
+		return byte_count.zero_result_err;
+}
+
+static inline void iop_chan_append(struct iop_adma_chan *chan)
+{
+	u32 adma_accr;
+
+	adma_accr = __raw_readl(ADMA_ACCR(chan));
+	adma_accr |= 0x2;
+	__raw_writel(adma_accr, ADMA_ACCR(chan));
+}
+
+static inline u32 iop_chan_get_status(struct iop_adma_chan *chan)
+{
+	return __raw_readl(ADMA_ACSR(chan));
+}
+
+static inline void iop_chan_disable(struct iop_adma_chan *chan)
+{
+	u32 adma_chan_ctrl = __raw_readl(ADMA_ACCR(chan));
+	adma_chan_ctrl &= ~0x1;
+	__raw_writel(adma_chan_ctrl, ADMA_ACCR(chan));
+}
+
+static inline void iop_chan_enable(struct iop_adma_chan *chan)
+{
+	u32 adma_chan_ctrl;
+
+	adma_chan_ctrl = __raw_readl(ADMA_ACCR(chan));
+	adma_chan_ctrl |= 0x1;
+	__raw_writel(adma_chan_ctrl, ADMA_ACCR(chan));
+}
+
+static inline void iop_adma_device_clear_eot_status(struct iop_adma_chan *chan)
+{
+	u32 status = __raw_readl(ADMA_ACSR(chan));
+	status &= (1 << 12);
+	__raw_writel(status, ADMA_ACSR(chan));
+}
+
+static inline void iop_adma_device_clear_eoc_status(struct iop_adma_chan *chan)
+{
+	u32 status = __raw_readl(ADMA_ACSR(chan));
+	status &= (1 << 11);
+	__raw_writel(status, ADMA_ACSR(chan));
+}
+
+static inline void iop_adma_device_clear_err_status(struct iop_adma_chan *chan)
+{
+	u32 status = __raw_readl(ADMA_ACSR(chan));
+	status &= (1 << 9) | (1 << 5) | (1 << 4) | (1 << 3);
+	__raw_writel(status, ADMA_ACSR(chan));
+}
+
+static inline int
+iop_is_err_int_parity(unsigned long status, struct iop_adma_chan *chan)
+{
+	return test_bit(9, &status);
+}
+
+static inline int
+iop_is_err_mcu_abort(unsigned long status, struct iop_adma_chan *chan)
+{
+	return test_bit(5, &status);
+}
+
+static inline int
+iop_is_err_int_tabort(unsigned long status, struct iop_adma_chan *chan)
+{
+	return test_bit(4, &status);
+}
+
+static inline int
+iop_is_err_int_mabort(unsigned long status, struct iop_adma_chan *chan)
+{
+	return test_bit(3, &status);
+}
+
+static inline int
+iop_is_err_pci_tabort(unsigned long status, struct iop_adma_chan *chan)
+{
+	return 0;
+}
+
+static inline int
+iop_is_err_pci_mabort(unsigned long status, struct iop_adma_chan *chan)
+{
+	return 0;
+}
+
+static inline int
+iop_is_err_split_tx(unsigned long status, struct iop_adma_chan *chan)
+{
+	return 0;
+}
+
+#endif /* _ADMA_H */
diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
new file mode 100644
index 0000000..9037d2e
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-iop13xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+	.macro	addruart, rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1			@ mmu enabled?
+	moveq	\rx, #0xff000000	@ physical
+	orreq	\rx, \rx, #0x00d80000
+	movne	\rx, #0xfe000000	@ virtual
+	orrne	\rx, \rx, #0x00e80000
+	orr	\rx, \rx, #0x00002300
+	orr	\rx, \rx, #0x00000040
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-iop13xx/dma.h b/arch/arm/mach-iop13xx/include/mach/dma.h
similarity index 100%
rename from include/asm-arm/arch-iop13xx/dma.h
rename to arch/arm/mach-iop13xx/include/mach/dma.h
diff --git a/include/asm-arm/arch-iop13xx/entry-macro.S b/arch/arm/mach-iop13xx/include/mach/entry-macro.S
similarity index 100%
rename from include/asm-arm/arch-iop13xx/entry-macro.S
rename to arch/arm/mach-iop13xx/include/mach/entry-macro.S
diff --git a/include/asm-arm/arch-iop13xx/hardware.h b/arch/arm/mach-iop13xx/include/mach/hardware.h
similarity index 100%
rename from include/asm-arm/arch-iop13xx/hardware.h
rename to arch/arm/mach-iop13xx/include/mach/hardware.h
diff --git a/include/asm-arm/arch-iop13xx/io.h b/arch/arm/mach-iop13xx/include/mach/io.h
similarity index 100%
rename from include/asm-arm/arch-iop13xx/io.h
rename to arch/arm/mach-iop13xx/include/mach/io.h
diff --git a/include/asm-arm/arch-iop13xx/iop13xx.h b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
similarity index 100%
rename from include/asm-arm/arch-iop13xx/iop13xx.h
rename to arch/arm/mach-iop13xx/include/mach/iop13xx.h
diff --git a/include/asm-arm/arch-iop13xx/iq81340.h b/arch/arm/mach-iop13xx/include/mach/iq81340.h
similarity index 100%
rename from include/asm-arm/arch-iop13xx/iq81340.h
rename to arch/arm/mach-iop13xx/include/mach/iq81340.h
diff --git a/include/asm-arm/arch-iop13xx/irqs.h b/arch/arm/mach-iop13xx/include/mach/irqs.h
similarity index 100%
rename from include/asm-arm/arch-iop13xx/irqs.h
rename to arch/arm/mach-iop13xx/include/mach/irqs.h
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
new file mode 100644
index 0000000..e8b59d8
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -0,0 +1,64 @@
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+#define TASK_SIZE  	UL(0x3f000000)
+#define PAGE_OFFSET	UL(0x40000000)
+#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
+
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_ARCH_IOP13XX)
+#define IOP13XX_PMMR_V_START (IOP13XX_PMMR_VIRT_MEM_BASE)
+#define IOP13XX_PMMR_V_END   (IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_SIZE)
+#define IOP13XX_PMMR_P_START (IOP13XX_PMMR_PHYS_MEM_BASE)
+#define IOP13XX_PMMR_P_END   (IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_SIZE)
+
+/*
+ * Virtual view <-> PCI DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+
+/* RAM has 1:1 mapping on the PCIe/x Busses */
+#define __virt_to_bus(x)	(__virt_to_phys(x))
+#define __bus_to_virt(x)    (__phys_to_virt(x))
+
+#define virt_to_lbus(x) 					   \
+(( ((void*)(x) >= (void*)IOP13XX_PMMR_V_START) &&		   \
+((void*)(x) < (void*)IOP13XX_PMMR_V_END) ) ? 			   \
+((x) - IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_PHYS_MEM_BASE) : \
+((x) - PAGE_OFFSET + PHYS_OFFSET))
+
+#define lbus_to_virt(x)                                            \
+(( ((x) >= IOP13XX_PMMR_P_START) && ((x) < IOP13XX_PMMR_P_END) ) ? \
+((x) - IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_VIRT_MEM_BASE ) : \
+((x) - PHYS_OFFSET + PAGE_OFFSET))
+
+/* Device is an lbus device if it is on the platform bus of the IOP13XX */
+#define is_lbus_device(dev) (dev &&\
+			     (strncmp(dev->bus->name, "platform", 8) == 0))
+
+#define __arch_page_to_dma(dev, page)					\
+({is_lbus_device(dev) ? (dma_addr_t)virt_to_lbus(page_address(page)) : \
+(dma_addr_t)__virt_to_bus(page_address(page));})
+
+#define __arch_dma_to_virt(dev, addr) \
+({is_lbus_device(dev) ? lbus_to_virt(addr) : __bus_to_virt(addr);})
+
+#define __arch_virt_to_dma(dev, addr) \
+({is_lbus_device(dev) ? virt_to_lbus(addr) : __virt_to_bus(addr);})
+
+#endif /* CONFIG_ARCH_IOP13XX */
+#endif /* !ASSEMBLY */
+
+#define PFN_TO_NID(addr)	(0)
+
+#endif
diff --git a/include/asm-arm/arch-iop13xx/msi.h b/arch/arm/mach-iop13xx/include/mach/msi.h
similarity index 100%
rename from include/asm-arm/arch-iop13xx/msi.h
rename to arch/arm/mach-iop13xx/include/mach/msi.h
diff --git a/arch/arm/mach-iop13xx/include/mach/pci.h b/arch/arm/mach-iop13xx/include/mach/pci.h
new file mode 100644
index 0000000..17b5515
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/pci.h
@@ -0,0 +1,57 @@
+#ifndef _IOP13XX_PCI_H_
+#define _IOP13XX_PCI_H_
+#include <mach/irqs.h>
+#include <asm/io.h>
+
+struct pci_sys_data;
+struct hw_pci;
+int iop13xx_pci_setup(int nr, struct pci_sys_data *sys);
+struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
+void iop13xx_atu_select(struct hw_pci *plat_pci);
+void iop13xx_pci_init(void);
+void iop13xx_map_pci_memory(void);
+
+#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY |	     \
+			       PCI_STATUS_SIG_TARGET_ABORT | \
+			       PCI_STATUS_REC_TARGET_ABORT | \
+			       PCI_STATUS_REC_TARGET_ABORT | \
+			       PCI_STATUS_REC_MASTER_ABORT | \
+			       PCI_STATUS_SIG_SYSTEM_ERROR | \
+	 		       PCI_STATUS_DETECTED_PARITY)
+
+#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR |  \
+				    IOP13XX_ATUE_STAT_ROOT_SYS_ERR |   \
+				    IOP13XX_ATUE_STAT_PCI_IFACE_ERR |  \
+				    IOP13XX_ATUE_STAT_ERR_COR |	       \
+				    IOP13XX_ATUE_STAT_ERR_UNCOR |      \
+				    IOP13XX_ATUE_STAT_CRS |	       \
+				    IOP13XX_ATUE_STAT_DET_PAR_ERR |    \
+				    IOP13XX_ATUE_STAT_EXT_REC_MABORT | \
+				    IOP13XX_ATUE_STAT_SIG_TABORT |     \
+				    IOP13XX_ATUE_STAT_EXT_REC_TABORT | \
+				    IOP13XX_ATUE_STAT_MASTER_DATA_PAR)
+
+#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM |        \
+				    IOP13XX_ATUX_STAT_REC_SCEM |       \
+				    IOP13XX_ATUX_STAT_TX_SERR |	       \
+				    IOP13XX_ATUX_STAT_DET_PAR_ERR |    \
+				    IOP13XX_ATUX_STAT_INT_REC_MABORT | \
+				    IOP13XX_ATUX_STAT_REC_SERR |       \
+				    IOP13XX_ATUX_STAT_EXT_REC_MABORT | \
+				    IOP13XX_ATUX_STAT_EXT_REC_TABORT | \
+				    IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \
+				    IOP13XX_ATUX_STAT_MASTER_DATA_PAR)
+
+/* PCI interrupts
+ */
+#define ATUX_INTA IRQ_IOP13XX_XINT0
+#define ATUX_INTB IRQ_IOP13XX_XINT1
+#define ATUX_INTC IRQ_IOP13XX_XINT2
+#define ATUX_INTD IRQ_IOP13XX_XINT3
+
+#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA
+#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB
+#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC
+#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD
+
+#endif /* _IOP13XX_PCI_H_ */
diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h
new file mode 100644
index 0000000..c7127f4
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/system.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-iop13xx/include/mach/system.h
+ *
+ *  Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <mach/iop13xx.h>
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * Reset the internal bus (warning both cores are reset)
+	 */
+	write_wdtcr(IOP_WDTCR_EN_ARM);
+	write_wdtcr(IOP_WDTCR_EN);
+	write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET);
+	write_wdtcr(0x1000);
+
+	for(;;);
+}
diff --git a/include/asm-arm/arch-iop13xx/time.h b/arch/arm/mach-iop13xx/include/mach/time.h
similarity index 100%
rename from include/asm-arm/arch-iop13xx/time.h
rename to arch/arm/mach-iop13xx/include/mach/time.h
diff --git a/arch/arm/mach-iop13xx/include/mach/timex.h b/arch/arm/mach-iop13xx/include/mach/timex.h
new file mode 100644
index 0000000..5b1f1c8
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/timex.h
@@ -0,0 +1,3 @@
+#include <mach/hardware.h>
+
+#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-iop13xx/include/mach/uncompress.h b/arch/arm/mach-iop13xx/include/mach/uncompress.h
new file mode 100644
index 0000000..fa4f805
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/uncompress.h
@@ -0,0 +1,23 @@
+#include <asm/types.h>
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+
+#define UART_BASE ((volatile u32 *)IOP13XX_UART1_PHYS)
+#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
+
+static inline void putc(char c)
+{
+	while ((UART_BASE[UART_LSR] & TX_DONE) != TX_DONE)
+		barrier();
+	UART_BASE[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-iop13xx/vmalloc.h b/arch/arm/mach-iop13xx/include/mach/vmalloc.h
similarity index 100%
rename from include/asm-arm/arch-iop13xx/vmalloc.h
rename to arch/arm/mach-iop13xx/include/mach/vmalloc.h
diff --git a/arch/arm/mach-iop13xx/io.c b/arch/arm/mach-iop13xx/io.c
index 44b8c8c..26cfa31 100644
--- a/arch/arm/mach-iop13xx/io.c
+++ b/arch/arm/mach-iop13xx/io.c
@@ -18,7 +18,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 void * __iomem __iop13xx_io(unsigned long io_addr)
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index e17457e..5051c03 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -18,14 +18,14 @@
  */
 #include <linux/pci.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/pci.h>
+#include <mach/pci.h>
 #include <asm/mach/time.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 extern int init_atu; /* Flag to select which ATU(s) to initialize / disable */
 
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index 19204d8..bc44307 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -18,14 +18,14 @@
  */
 #include <linux/pci.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/pci.h>
+#include <mach/pci.h>
 #include <asm/mach/time.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 extern int init_atu;
 
diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c
index e860a6d2..0d099ca 100644
--- a/arch/arm/mach-iop13xx/irq.c
+++ b/arch/arm/mach-iop13xx/irq.c
@@ -23,9 +23,9 @@
 #include <asm/uaccess.h>
 #include <asm/mach/irq.h>
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/msi.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/msi.h>
 
 /* INTCTL0 CP6 R0 Page 4
  */
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index a0e0147..673b0db 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -21,11 +21,11 @@
 #include <linux/delay.h>
 #include <linux/jiffies.h>
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/sizes.h>
 #include <asm/signal.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/pci.h>
+#include <mach/pci.h>
 
 #define IOP13XX_PCI_DEBUG 0
 #define PRINTK(x...) ((void)(IOP13XX_PCI_DEBUG && printk(x)))
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index d3fee8a..b17ccc8 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -22,7 +22,7 @@
 #include <linux/mtd/physmap.h>
 #endif
 #include <asm/mach/map.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/hardware/iop_adma.h>
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 9941395..3ad4696 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -23,7 +23,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <asm/mach/arch.h>
@@ -31,7 +31,7 @@
 #include <asm/mach/pci.h>
 #include <asm/mach/time.h>
 #include <asm/mach-types.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 static void __init em7210_timer_init(void)
 {
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 8761445..45d6127 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -25,7 +25,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -34,7 +34,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach-types.h>
 #include <asm/page.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * GLAN Tank timer tick configuration.
diff --git a/include/asm-arm/arch-iop32x/adma.h b/arch/arm/mach-iop32x/include/mach/adma.h
similarity index 100%
rename from include/asm-arm/arch-iop32x/adma.h
rename to arch/arm/mach-iop32x/include/mach/adma.h
diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S
new file mode 100644
index 0000000..58b0166
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+		.macro	addruart, rx
+		mov	\rx, #0xfe000000	@ physical as well as virtual
+		orr	\rx, \rx, #0x00800000	@ location of the UART
+		.endm
+
+#define UART_SHIFT	0
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-iop32x/include/mach/dma.h b/arch/arm/mach-iop32x/include/mach/dma.h
new file mode 100644
index 0000000..f8bd817
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/dma.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/dma.h
+ *
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
diff --git a/arch/arm/mach-iop32x/include/mach/entry-macro.S b/arch/arm/mach-iop32x/include/mach/entry-macro.S
new file mode 100644
index 0000000..b02fb56
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/entry-macro.S
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IOP32x-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/iop32x.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro get_irqnr_preamble, base, tmp
+	mrc	p15, 0, \tmp, c15, c1, 0
+	orr	\tmp, \tmp, #(1 << 6)
+	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
+	mrc	p15, 0, \tmp, c15, c1, 0
+	mov	\tmp, \tmp
+	sub	pc, pc, #4			@ cp_wait
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	mrc     p6, 0, \irqstat, c8, c0, 0	@ Read IINTSRC
+	cmp     \irqstat, #0
+	clzne   \irqnr, \irqstat
+	rsbne   \irqnr, \irqnr, #31
+	.endm
+
+	.macro arch_ret_to_user, tmp1, tmp2
+	mrc	p15, 0, \tmp1, c15, c1, 0
+	ands	\tmp2, \tmp1, #(1 << 6)
+	bicne	\tmp1, \tmp1, #(1 << 6)
+	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
+	.endm
diff --git a/arch/arm/mach-iop32x/include/mach/glantank.h b/arch/arm/mach-iop32x/include/mach/glantank.h
new file mode 100644
index 0000000..958eb91
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/glantank.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/glantank.h
+ *
+ * IO-Data GLAN Tank board registers
+ */
+
+#ifndef __GLANTANK_H
+#define __GLANTANK_H
+
+#define GLANTANK_UART		0xfe800000	/* UART */
+
+
+#endif
diff --git a/include/asm-arm/arch-iop32x/gpio.h b/arch/arm/mach-iop32x/include/mach/gpio.h
similarity index 100%
rename from include/asm-arm/arch-iop32x/gpio.h
rename to arch/arm/mach-iop32x/include/mach/gpio.h
diff --git a/arch/arm/mach-iop32x/include/mach/hardware.h b/arch/arm/mach-iop32x/include/mach/hardware.h
new file mode 100644
index 0000000..d559c4e
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/hardware.h
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/hardware.h
+ */
+
+#ifndef __HARDWARE_H
+#define __HARDWARE_H
+
+#include <asm/types.h>
+
+/*
+ * Note about PCI IO space mappings
+ *
+ * To make IO space accesses efficient, we store virtual addresses in
+ * the IO resources.
+ *
+ * The PCI IO space is located at virtual 0xfe000000 from physical
+ * 0x90000000. The PCI BARs must be programmed with physical addresses,
+ * but when we read them, we convert them to virtual addresses. See
+ * arch/arm/plat-iop/pci.c.
+ */
+#define pcibios_assign_all_busses() 1
+#define PCIBIOS_MIN_IO		0x00000000
+#define PCIBIOS_MIN_MEM		0x00000000
+
+#ifndef __ASSEMBLY__
+void iop32x_init_irq(void);
+#endif
+
+
+/*
+ * Generic chipset bits
+ */
+#include "iop32x.h"
+
+/*
+ * Board specific bits
+ */
+#include "glantank.h"
+#include "iq80321.h"
+#include "iq31244.h"
+#include "n2100.h"
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/io.h b/arch/arm/mach-iop32x/include/mach/io.h
new file mode 100644
index 0000000..ce54705b
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/io.h
+ *
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IO_H
+#define __IO_H
+
+#include <mach/hardware.h>
+
+extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
+	unsigned int mtype);
+extern void __iop3xx_iounmap(void __iomem *addr);
+
+#define IO_SPACE_LIMIT		0xffffffff
+#define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
+#define __mem_pci(a)		(a)
+
+#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
+#define __arch_iounmap(a)	 __iop3xx_iounmap(a)
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/iop32x.h b/arch/arm/mach-iop32x/include/mach/iop32x.h
new file mode 100644
index 0000000..abd9eb4
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/iop32x.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/iop32x.h
+ *
+ * Intel IOP32X Chip definitions
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOP32X_H
+#define __IOP32X_H
+
+/*
+ * Peripherals that are shared between the iop32x and iop33x but
+ * located at different addresses.
+ */
+#define IOP3XX_GPIO_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c4 + (reg))
+#define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
+
+#include <asm/hardware/iop3xx.h>
+
+/* ATU Parameters
+ * set up a 1:1 bus to physical ram relationship
+ * w/ physical ram on top of pci in the memory map
+ */
+#define IOP32X_MAX_RAM_SIZE            0x40000000UL
+#define IOP3XX_MAX_RAM_SIZE            IOP32X_MAX_RAM_SIZE
+#define IOP3XX_PCI_LOWER_MEM_BA        0x80000000
+#define IOP32X_PCI_MEM_WINDOW_SIZE     0x04000000
+#define IOP3XX_PCI_MEM_WINDOW_SIZE     IOP32X_PCI_MEM_WINDOW_SIZE
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/iq31244.h b/arch/arm/mach-iop32x/include/mach/iq31244.h
new file mode 100644
index 0000000..6b6b369
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/iq31244.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/iq31244.h
+ *
+ * Intel IQ31244 evaluation board registers
+ */
+
+#ifndef __IQ31244_H
+#define __IQ31244_H
+
+#define IQ31244_UART		0xfe800000	/* UART #1 */
+#define IQ31244_7SEG_1		0xfe840000	/* 7-Segment MSB */
+#define IQ31244_7SEG_0		0xfe850000	/* 7-Segment LSB (WO) */
+#define IQ31244_ROTARY_SW	0xfe8d0000	/* Rotary Switch */
+#define IQ31244_BATT_STAT	0xfe8f0000	/* Battery Status */
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/iq80321.h b/arch/arm/mach-iop32x/include/mach/iq80321.h
new file mode 100644
index 0000000..498819b
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/iq80321.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/iq80321.h
+ *
+ * Intel IQ80321 evaluation board registers
+ */
+
+#ifndef __IQ80321_H
+#define __IQ80321_H
+
+#define IQ80321_UART		0xfe800000	/* UART #1 */
+#define IQ80321_7SEG_1		0xfe840000	/* 7-Segment MSB */
+#define IQ80321_7SEG_0		0xfe850000	/* 7-Segment LSB (WO) */
+#define IQ80321_ROTARY_SW	0xfe8d0000	/* Rotary Switch */
+#define IQ80321_BATT_STAT	0xfe8f0000	/* Battery Status */
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/irqs.h b/arch/arm/mach-iop32x/include/mach/irqs.h
new file mode 100644
index 0000000..33573e0
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/irqs.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/irqs.h
+ *
+ * Author:	Rory Bolt <rorybolt@pacbell.net>
+ * Copyright:	(C) 2002 Rory Bolt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IRQS_H
+#define __IRQS_H
+
+/*
+ * IOP80321 chipset interrupts
+ */
+#define IRQ_IOP32X_DMA0_EOT	0
+#define IRQ_IOP32X_DMA0_EOC	1
+#define IRQ_IOP32X_DMA1_EOT	2
+#define IRQ_IOP32X_DMA1_EOC	3
+#define IRQ_IOP32X_AA_EOT	6
+#define IRQ_IOP32X_AA_EOC	7
+#define IRQ_IOP32X_CORE_PMON	8
+#define IRQ_IOP32X_TIMER0	9
+#define IRQ_IOP32X_TIMER1	10
+#define IRQ_IOP32X_I2C_0	11
+#define IRQ_IOP32X_I2C_1	12
+#define IRQ_IOP32X_MESSAGING	13
+#define IRQ_IOP32X_ATU_BIST	14
+#define IRQ_IOP32X_PERFMON	15
+#define IRQ_IOP32X_CORE_PMU	16
+#define IRQ_IOP32X_BIU_ERR	17
+#define IRQ_IOP32X_ATU_ERR	18
+#define IRQ_IOP32X_MCU_ERR	19
+#define IRQ_IOP32X_DMA0_ERR	20
+#define IRQ_IOP32X_DMA1_ERR	21
+#define IRQ_IOP32X_AA_ERR	23
+#define IRQ_IOP32X_MSG_ERR	24
+#define IRQ_IOP32X_SSP		25
+#define IRQ_IOP32X_XINT0	27
+#define IRQ_IOP32X_XINT1	28
+#define IRQ_IOP32X_XINT2	29
+#define IRQ_IOP32X_XINT3	30
+#define IRQ_IOP32X_HPI		31
+
+#define NR_IRQS			32
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/memory.h b/arch/arm/mach-iop32x/include/mach/memory.h
new file mode 100644
index 0000000..42cd4bf
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/memory.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/memory.h
+ */
+
+#ifndef __MEMORY_H
+#define __MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0xa0000000)
+
+/*
+ * Virtual view <-> PCI DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	(__virt_to_phys(x))
+#define __bus_to_virt(x)	(__phys_to_virt(x))
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/n2100.h b/arch/arm/mach-iop32x/include/mach/n2100.h
new file mode 100644
index 0000000..40b8a53
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/n2100.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/n2100.h
+ *
+ * Thecus N2100 board registers
+ */
+
+#ifndef __N2100_H
+#define __N2100_H
+
+#define N2100_UART		0xfe800000	/* UART */
+
+#define N2100_COPY_BUTTON	IOP3XX_GPIO_LINE(0)
+#define N2100_PCA9532_RESET	IOP3XX_GPIO_LINE(2)
+#define N2100_RESET_BUTTON	IOP3XX_GPIO_LINE(3)
+#define N2100_HARDWARE_RESET	IOP3XX_GPIO_LINE(4)
+#define N2100_POWER_BUTTON	IOP3XX_GPIO_LINE(5)
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h
new file mode 100644
index 0000000..20f923e
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/system.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/system.h
+ *
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	local_irq_disable();
+
+	if (machine_is_n2100()) {
+		gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
+		gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);
+		while (1)
+			;
+	}
+
+	*IOP3XX_PCSR = 0x30;
+
+	/* Jump into ROM at address 0 */
+	cpu_reset(0);
+}
diff --git a/include/asm-arm/arch-iop32x/time.h b/arch/arm/mach-iop32x/include/mach/time.h
similarity index 100%
rename from include/asm-arm/arch-iop32x/time.h
rename to arch/arm/mach-iop32x/include/mach/time.h
diff --git a/arch/arm/mach-iop32x/include/mach/timex.h b/arch/arm/mach-iop32x/include/mach/timex.h
new file mode 100644
index 0000000..a541afc
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/timex.h
+ *
+ * IOP32x architecture timex specifications
+ */
+
+#include <mach/hardware.h>
+
+#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/arch/arm/mach-iop32x/include/mach/uncompress.h b/arch/arm/mach-iop32x/include/mach/uncompress.h
new file mode 100644
index 0000000..b247551
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/uncompress.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/uncompress.h
+ */
+
+#include <asm/types.h>
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+
+static volatile u8 *uart_base;
+
+#define TX_DONE		(UART_LSR_TEMT | UART_LSR_THRE)
+
+static inline void putc(char c)
+{
+	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+		barrier();
+	uart_base[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+	if (machine_is_iq80321())
+		uart_base = (volatile u8 *)IQ80321_UART;
+	else if (machine_is_iq31244() || machine_is_em7210())
+		uart_base = (volatile u8 *)IQ31244_UART;
+	else
+		uart_base = (volatile u8 *)0xfe800000;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-iop32x/include/mach/vmalloc.h b/arch/arm/mach-iop32x/include/mach/vmalloc.h
new file mode 100644
index 0000000..85ceb09
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe000000
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 5a4e951..082818aa 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -26,7 +26,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -36,7 +36,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * Until March of 2007 iq31244 platforms and ep80219 platforms shared the
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 1c098c5..d735539 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -23,7 +23,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -33,7 +33,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * IQ80321 timer tick configuration.
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
index 2ea1e71..ba59b2d 100644
--- a/arch/arm/mach-iop32x/irq.c
+++ b/arch/arm/mach-iop32x/irq.c
@@ -16,7 +16,7 @@
 #include <linux/list.h>
 #include <asm/mach/irq.h>
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 static u32 iop32x_mask;
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index f38dc19..3173f9c 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -30,7 +30,7 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -40,7 +40,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * N2100 timer tick configuration.
diff --git a/include/asm-arm/arch-iop33x/adma.h b/arch/arm/mach-iop33x/include/mach/adma.h
similarity index 100%
rename from include/asm-arm/arch-iop33x/adma.h
rename to arch/arm/mach-iop33x/include/mach/adma.h
diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S
new file mode 100644
index 0000000..a60c9ef
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+		.macro	addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ mmu enabled?
+		moveq	\rx, #0xff000000	@ physical
+		movne	\rx, #0xfe000000	@ virtual
+		orr	\rx, \rx, #0x00ff0000
+		orr	\rx, \rx, #0x0000f700
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-iop33x/include/mach/dma.h b/arch/arm/mach-iop33x/include/mach/dma.h
new file mode 100644
index 0000000..d8b4223
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/dma.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/dma.h
+ *
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
diff --git a/arch/arm/mach-iop33x/include/mach/entry-macro.S b/arch/arm/mach-iop33x/include/mach/entry-macro.S
new file mode 100644
index 0000000..4e1f728
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/entry-macro.S
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IOP33x-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/iop33x.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro get_irqnr_preamble, base, tmp
+	mrc	p15, 0, \tmp, c15, c1, 0
+	orr	\tmp, \tmp, #(1 << 6)
+	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
+	mrc	p15, 0, \tmp, c15, c1, 0
+	mov	\tmp, \tmp
+	sub	pc, pc, #4			@ cp_wait
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	mrc     p6, 0, \irqstat, c14, c0, 0     @ Read IINTVEC
+	cmp     \irqstat, #0
+	mrceq   p6, 0, \irqstat, c14, c0, 0     @ erratum 63 workaround
+	adds    \irqnr, \irqstat, #1
+	movne   \irqnr, \irqstat, lsr #2
+	.endm
+
+	.macro arch_ret_to_user, tmp1, tmp2
+	mrc	p15, 0, \tmp1, c15, c1, 0
+	ands	\tmp2, \tmp1, #(1 << 6)
+	bicne	\tmp1, \tmp1, #(1 << 6)
+	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
+	.endm
diff --git a/include/asm-arm/arch-iop33x/gpio.h b/arch/arm/mach-iop33x/include/mach/gpio.h
similarity index 100%
rename from include/asm-arm/arch-iop33x/gpio.h
rename to arch/arm/mach-iop33x/include/mach/gpio.h
diff --git a/arch/arm/mach-iop33x/include/mach/hardware.h b/arch/arm/mach-iop33x/include/mach/hardware.h
new file mode 100644
index 0000000..8c10e43
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/hardware.h
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/hardware.h
+ */
+
+#ifndef __HARDWARE_H
+#define __HARDWARE_H
+
+#include <asm/types.h>
+
+/*
+ * Note about PCI IO space mappings
+ *
+ * To make IO space accesses efficient, we store virtual addresses in
+ * the IO resources.
+ *
+ * The PCI IO space is located at virtual 0xfe000000 from physical
+ * 0x90000000.  The PCI BARs must be programmed with physical addresses,
+ * but when we read them, we convert them to virtual addresses.  See
+ * arch/arm/mach-iop3xx/iop3xx-pci.c
+ */
+#define pcibios_assign_all_busses()	1
+#define PCIBIOS_MIN_IO		0x00000000
+#define PCIBIOS_MIN_MEM		0x00000000
+
+#ifndef __ASSEMBLY__
+void iop33x_init_irq(void);
+
+extern struct platform_device iop33x_uart0_device;
+extern struct platform_device iop33x_uart1_device;
+#endif
+
+
+/*
+ * Generic chipset bits
+ *
+ */
+#include "iop33x.h"
+
+/*
+ * Board specific bits
+ */
+#include "iq80331.h"
+#include "iq80332.h"
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/io.h b/arch/arm/mach-iop33x/include/mach/io.h
new file mode 100644
index 0000000..1588746
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/io.h
+ *
+ * Copyright (C) 2001  MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IO_H
+#define __IO_H
+
+#include <mach/hardware.h>
+
+extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
+	unsigned int mtype);
+extern void __iop3xx_iounmap(void __iomem *addr);
+
+#define IO_SPACE_LIMIT		0xffffffff
+#define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
+#define __mem_pci(a)		(a)
+
+#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
+#define __arch_iounmap(a)	 __iop3xx_iounmap(a)
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/iop33x.h b/arch/arm/mach-iop33x/include/mach/iop33x.h
new file mode 100644
index 0000000..2456731
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/iop33x.h
@@ -0,0 +1,43 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/iop33x.h
+ *
+ * Intel IOP33X Chip definitions
+ *
+ * Author: Dave Jiang (dave.jiang@intel.com)
+ * Copyright (C) 2003, 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOP33X_H
+#define __IOP33X_H
+
+/*
+ * Peripherals that are shared between the iop32x and iop33x but
+ * located at different addresses.
+ */
+#define IOP3XX_GPIO_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780 + (reg))
+#define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg))
+
+#include <asm/hardware/iop3xx.h>
+
+/* UARTs  */
+#define IOP33X_UART0_PHYS	(IOP3XX_PERIPHERAL_PHYS_BASE + 0x1700)
+#define IOP33X_UART0_VIRT	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1700)
+#define IOP33X_UART1_PHYS	(IOP3XX_PERIPHERAL_PHYS_BASE + 0x1740)
+#define IOP33X_UART1_VIRT	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1740)
+
+/* ATU Parameters
+ * set up a 1:1 bus to physical ram relationship
+ * w/ pci on top of physical ram in memory map
+ */
+#define IOP33X_MAX_RAM_SIZE		0x80000000UL
+#define IOP3XX_MAX_RAM_SIZE		IOP33X_MAX_RAM_SIZE
+#define IOP3XX_PCI_LOWER_MEM_BA	(PHYS_OFFSET + IOP33X_MAX_RAM_SIZE)
+#define IOP33X_PCI_MEM_WINDOW_SIZE	0x08000000
+#define IOP3XX_PCI_MEM_WINDOW_SIZE	IOP33X_PCI_MEM_WINDOW_SIZE
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/iq80331.h b/arch/arm/mach-iop33x/include/mach/iq80331.h
new file mode 100644
index 0000000..fe406b0
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/iq80331.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/iq80331.h
+ *
+ * Intel IQ80331 evaluation board registers
+ */
+
+#ifndef __IQ80331_H
+#define __IQ80331_H
+
+#define IQ80331_7SEG_1		0xce840000	/* 7-Segment MSB */
+#define IQ80331_7SEG_0		0xce850000	/* 7-Segment LSB (WO) */
+#define IQ80331_ROTARY_SW	0xce8d0000	/* Rotary Switch */
+#define IQ80331_BATT_STAT	0xce8f0000	/* Battery Status */
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/iq80332.h b/arch/arm/mach-iop33x/include/mach/iq80332.h
new file mode 100644
index 0000000..8325d71
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/iq80332.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/iq80332.h
+ *
+ * Intel IQ80332 evaluation board registers
+ */
+
+#ifndef __IQ80332_H
+#define __IQ80332_H
+
+#define IQ80332_7SEG_1		0xce840000	/* 7-Segment MSB */
+#define IQ80332_7SEG_0		0xce850000	/* 7-Segment LSB (WO) */
+#define IQ80332_ROTARY_SW	0xce8d0000	/* Rotary Switch */
+#define IQ80332_BATT_STAT	0xce8f0000	/* Battery Status */
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/irqs.h b/arch/arm/mach-iop33x/include/mach/irqs.h
new file mode 100644
index 0000000..707628a
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/irqs.h
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/irqs.h
+ *
+ * Author:	Dave Jiang (dave.jiang@intel.com)
+ * Copyright:	(C) 2003 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IRQS_H
+#define __IRQS_H
+
+/*
+ * IOP80331 chipset interrupts
+ */
+#define IRQ_IOP33X_DMA0_EOT	0
+#define IRQ_IOP33X_DMA0_EOC	1
+#define IRQ_IOP33X_DMA1_EOT	2
+#define IRQ_IOP33X_DMA1_EOC	3
+#define IRQ_IOP33X_AA_EOT	6
+#define IRQ_IOP33X_AA_EOC	7
+#define IRQ_IOP33X_TIMER0	8
+#define IRQ_IOP33X_TIMER1	9
+#define IRQ_IOP33X_I2C_0	10
+#define IRQ_IOP33X_I2C_1	11
+#define IRQ_IOP33X_MSG		12
+#define IRQ_IOP33X_MSGIBQ	13
+#define IRQ_IOP33X_ATU_BIST	14
+#define IRQ_IOP33X_PERFMON	15
+#define IRQ_IOP33X_CORE_PMU	16
+#define IRQ_IOP33X_XINT0	24
+#define IRQ_IOP33X_XINT1	25
+#define IRQ_IOP33X_XINT2	26
+#define IRQ_IOP33X_XINT3	27
+#define IRQ_IOP33X_XINT8	32
+#define IRQ_IOP33X_XINT9	33
+#define IRQ_IOP33X_XINT10	34
+#define IRQ_IOP33X_XINT11	35
+#define IRQ_IOP33X_XINT12	36
+#define IRQ_IOP33X_XINT13	37
+#define IRQ_IOP33X_XINT14	38
+#define IRQ_IOP33X_XINT15	39
+#define IRQ_IOP33X_UART0	51
+#define IRQ_IOP33X_UART1	52
+#define IRQ_IOP33X_PBIE		53
+#define IRQ_IOP33X_ATU_CRW	54
+#define IRQ_IOP33X_ATU_ERR	55
+#define IRQ_IOP33X_MCU_ERR	56
+#define IRQ_IOP33X_DMA0_ERR	57
+#define IRQ_IOP33X_DMA1_ERR	58
+#define IRQ_IOP33X_AA_ERR	60
+#define IRQ_IOP33X_MSG_ERR	62
+#define IRQ_IOP33X_HPI		63
+
+#define NR_IRQS			64
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/memory.h b/arch/arm/mach-iop33x/include/mach/memory.h
new file mode 100644
index 0000000..2cef0bb
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/memory.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/memory.h
+ */
+
+#ifndef __MEMORY_H
+#define __MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+
+/*
+ * Virtual view <-> PCI DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	(__virt_to_phys(x))
+#define __bus_to_virt(x)	(__phys_to_virt(x))
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h
new file mode 100644
index 0000000..7bf3bfb
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/system.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/system.h
+ *
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	*IOP3XX_PCSR = 0x30;
+
+	/* Jump into ROM at address 0 */
+	cpu_reset(0);
+}
diff --git a/include/asm-arm/arch-iop33x/time.h b/arch/arm/mach-iop33x/include/mach/time.h
similarity index 100%
rename from include/asm-arm/arch-iop33x/time.h
rename to arch/arm/mach-iop33x/include/mach/time.h
diff --git a/arch/arm/mach-iop33x/include/mach/timex.h b/arch/arm/mach-iop33x/include/mach/timex.h
new file mode 100644
index 0000000..c757608
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/timex.h
+ *
+ * IOP3xx architecture timex specifications
+ */
+
+#include <mach/hardware.h>
+
+#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/arch/arm/mach-iop33x/include/mach/uncompress.h b/arch/arm/mach-iop33x/include/mach/uncompress.h
new file mode 100644
index 0000000..b42423f
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/uncompress.h
+ */
+
+#include <asm/types.h>
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+
+static volatile u32 *uart_base;
+
+#define TX_DONE		(UART_LSR_TEMT | UART_LSR_THRE)
+
+static inline void putc(char c)
+{
+	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+		barrier();
+	uart_base[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+	if (machine_is_iq80331() || machine_is_iq80332())
+		uart_base = (volatile u32 *)IOP33X_UART0_PHYS;
+	else
+		uart_base = (volatile u32 *)0xfe800000;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-iop33x/include/mach/vmalloc.h b/arch/arm/mach-iop33x/include/mach/vmalloc.h
new file mode 100644
index 0000000..f9f99de
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe000000
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index e736c50..c7d99f9 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -22,7 +22,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * IQ80331 timer tick configuration.
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 75347a2..af616c5 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -22,7 +22,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * IQ80332 timer tick configuration.
diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c
index 6ae1fac6..abb4ea2 100644
--- a/arch/arm/mach-iop33x/irq.c
+++ b/arch/arm/mach-iop33x/irq.c
@@ -16,7 +16,7 @@
 #include <linux/list.h>
 #include <asm/mach/irq.h>
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 static u32 iop33x_mask0;
diff --git a/arch/arm/mach-iop33x/uart.c b/arch/arm/mach-iop33x/uart.c
index f11b86f..8c21870 100644
--- a/arch/arm/mach-iop33x/uart.c
+++ b/arch/arm/mach-iop33x/uart.c
@@ -24,7 +24,7 @@
 #include <asm/setup.h>
 #include <asm/system.h>
 #include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iop3xx.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index 7e810b3..a6a4f93 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -29,7 +29,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
@@ -39,7 +39,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 static DEFINE_SPINLOCK(ixp2000_slowport_lock);
 static unsigned long ixp2000_slowport_irq_flags;
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index 17af9f7..c62ed65 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -38,7 +38,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
new file mode 100644
index 0000000..904ff56
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
@@ -0,0 +1,27 @@
+/* arch/arm/mach-ixp2000/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro  addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0xc0000000	@ Physical base
+		movne	\rx, #0xfe000000	@ virtual base
+		orrne	\rx, \rx, #0x00f00000
+		orr	\rx, \rx, #0x00030000
+#ifdef	__ARMEB__
+		orr	\rx, \rx, #0x00000003
+#endif
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ixp2000/include/mach/dma.h b/arch/arm/mach-ixp2000/include/mach/dma.h
new file mode 100644
index 0000000..26063d6
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/dma.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/dma.h
+ *
+ * Copyright (C) 2002 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
diff --git a/arch/arm/mach-ixp2000/include/mach/enp2611.h b/arch/arm/mach-ixp2000/include/mach/enp2611.h
new file mode 100644
index 0000000..9ce3690
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/enp2611.h
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/enp2611.h
+ *
+ * Register and other defines for Radisys ENP-2611
+ *
+ * Created 2004 by Lennert Buytenhek from the ixdp2x01 code.  The
+ * original version carries the following notices:
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __ENP2611_H
+#define __ENP2611_H
+
+#define ENP2611_CALEB_PHYS_BASE		0xc5000000
+#define ENP2611_CALEB_VIRT_BASE		0xfe000000
+#define ENP2611_CALEB_SIZE		0x00100000
+
+#define ENP2611_PM3386_0_PHYS_BASE	0xc6000000
+#define ENP2611_PM3386_0_VIRT_BASE	0xfe100000
+#define ENP2611_PM3386_0_SIZE		0x00100000
+
+#define ENP2611_PM3386_1_PHYS_BASE	0xc6400000
+#define ENP2611_PM3386_1_VIRT_BASE	0xfe200000
+#define ENP2611_PM3386_1_SIZE		0x00100000
+
+#define ENP2611_GPIO_SCL		7
+#define ENP2611_GPIO_SDA		6
+
+#define IRQ_ENP2611_THERMAL		IRQ_IXP2000_GPIO4
+#define IRQ_ENP2611_OPTION_BOARD	IRQ_IXP2000_GPIO3
+#define IRQ_ENP2611_CALEB		IRQ_IXP2000_GPIO2
+#define IRQ_ENP2611_PM3386_1		IRQ_IXP2000_GPIO1
+#define IRQ_ENP2611_PM3386_0		IRQ_IXP2000_GPIO0
+
+
+#endif
diff --git a/arch/arm/mach-ixp2000/include/mach/entry-macro.S b/arch/arm/mach-ixp2000/include/mach/entry-macro.S
new file mode 100644
index 0000000..5850ffc
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/entry-macro.S
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IXP2000-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/irqs.h>
+
+		.macro  disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		mov	\irqnr, #0x0              @clear out irqnr as default
+                mov	\base, #0xfe000000
+		orr	\base, \base, #0x00e00000
+		orr	\base, \base, #0x08
+		ldr	\irqstat, [\base]         @ get interrupts
+
+		cmp	\irqstat, #0
+		beq	1001f
+
+		clz     \irqnr, \irqstat
+		mov     \base, #31
+		subs    \irqnr, \base, \irqnr
+
+		/*
+		 * We handle PCIA and PCIB here so we don't have an
+		 * extra layer of code just to check these two bits.
+		 */
+		cmp	\irqnr, #IRQ_IXP2000_PCI
+		bne	1001f
+
+		mov	\base, #0xfe000000
+		orr	\base, \base, #0x00c00000
+		orr	\base, \base, #0x00000100
+		orr	\base, \base, #0x00000058
+		ldr	\irqstat, [\base]
+
+		mov	\tmp, #(1<<26)
+		tst	\irqstat, \tmp
+		movne	\irqnr, #IRQ_IXP2000_PCIA
+		bne	1001f
+
+		mov	\tmp, #(1<<27)
+		tst	\irqstat, \tmp
+		movne	\irqnr, #IRQ_IXP2000_PCIB
+
+1001:
+		.endm
+
diff --git a/arch/arm/mach-ixp2000/include/mach/gpio.h b/arch/arm/mach-ixp2000/include/mach/gpio.h
new file mode 100644
index 0000000..4a88d2c
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/gpio.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/gpio.h
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ *
+ * This program is free software, you can redistribute it and/or modify 
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * IXP2000 GPIO in/out, edge/level detection for IRQs:
+ * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High
+ * or both Falling-edge and Rising-edge.  
+ * This must be called *before* the corresponding IRQ is registerd.
+ * Use this instead of directly setting the GPIO registers.
+ * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
+ */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#ifndef __ASSEMBLY__
+
+#define GPIO_IN				0
+#define GPIO_OUT			1
+
+#define IXP2000_GPIO_LOW		0
+#define IXP2000_GPIO_HIGH		1
+
+extern void gpio_line_config(int line, int direction);
+
+static inline int gpio_line_get(int line)
+{
+	return (((*IXP2000_GPIO_PLR) >> line) & 1);
+}
+
+static inline void gpio_line_set(int line, int value)
+{
+	if (value == IXP2000_GPIO_HIGH) {
+		ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line);
+	} else if (value == IXP2000_GPIO_LOW) {
+		ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line);
+	}
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* ASM_ARCH_IXP2000_GPIO_H_ */
diff --git a/arch/arm/mach-ixp2000/include/mach/hardware.h b/arch/arm/mach-ixp2000/include/mach/hardware.h
new file mode 100644
index 0000000..f033de4
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/hardware.h
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/hardware.h
+ *
+ * Hardware definitions for IXP2400/2800 based systems
+ *
+ * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
+ *
+ * Maintainer: Deepak Saxena <dsaxena@mvista.com>
+ *
+ * Copyright (C) 2001-2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#define __ASM_ARCH_HARDWARE_H__
+
+/*
+ * This needs to be platform-specific?
+ */
+#define PCIBIOS_MIN_IO          0x00000000
+#define PCIBIOS_MIN_MEM         0x00000000
+
+#include "ixp2000-regs.h"	/* Chipset Registers */
+
+#define pcibios_assign_all_busses() 0
+
+/*
+ * Platform helper functions
+ */
+#include "platform.h"
+
+/*
+ * Platform-specific bits
+ */
+#include "enp2611.h"		/* ENP-2611 */
+#include "ixdp2x00.h"		/* IXDP2400/2800 */
+#include "ixdp2x01.h"		/* IXDP2401/2801 */
+
+#endif  /* _ASM_ARCH_HARDWARE_H__ */
diff --git a/arch/arm/mach-ixp2000/include/mach/io.h b/arch/arm/mach-ixp2000/include/mach/io.h
new file mode 100644
index 0000000..859e5849
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/io.h
@@ -0,0 +1,134 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/io.h
+ *
+ * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002  Intel Corp.
+ * Copyrgiht (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT		0xffffffff
+#define __mem_pci(a)		(a)
+
+/*
+ * The A? revisions of the IXP2000s assert byte lanes for PCI I/O
+ * transactions the other way round (MEM transactions don't have this
+ * issue), so if we want to support those models, we need to override
+ * the standard I/O functions.
+ *
+ * B0 and later have a bit that can be set to 1 to get the proper
+ * behavior for I/O transactions, which then allows us to use the
+ * standard I/O functions.  This is what we do if the user does not
+ * explicitly ask for support for pre-B0.
+ */
+#ifdef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
+#define ___io(p)		((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
+
+#define alignb(addr)		(void __iomem *)((unsigned long)(addr) ^ 3)
+#define alignw(addr)		(void __iomem *)((unsigned long)(addr) ^ 2)
+
+#define outb(v,p)		__raw_writeb((v),alignb(___io(p)))
+#define outw(v,p)		__raw_writew((v),alignw(___io(p)))
+#define outl(v,p)		__raw_writel((v),___io(p))
+
+#define inb(p)		({ unsigned int __v = __raw_readb(alignb(___io(p))); __v; })
+#define inw(p)		\
+	({ unsigned int __v = (__raw_readw(alignw(___io(p)))); __v; })
+#define inl(p)		\
+	({ unsigned int __v = (__raw_readl(___io(p))); __v; })
+
+#define outsb(p,d,l)		__raw_writesb(alignb(___io(p)),d,l)
+#define outsw(p,d,l)		__raw_writesw(alignw(___io(p)),d,l)
+#define outsl(p,d,l)		__raw_writesl(___io(p),d,l)
+
+#define insb(p,d,l)		__raw_readsb(alignb(___io(p)),d,l)
+#define insw(p,d,l)		__raw_readsw(alignw(___io(p)),d,l)
+#define insl(p,d,l)		__raw_readsl(___io(p),d,l)
+
+#define __is_io_address(p)	((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE)
+
+#define ioread8(p)						\
+	({							\
+		unsigned int __v;				\
+								\
+		if (__is_io_address(p)) {			\
+			__v = __raw_readb(alignb(p));		\
+		} else {					\
+			__v = __raw_readb(p);			\
+		}						\
+								\
+		__v;						\
+	})							\
+
+#define ioread16(p)						\
+	({							\
+		unsigned int __v;				\
+								\
+		if (__is_io_address(p)) {			\
+			__v = __raw_readw(alignw(p));		\
+		} else {					\
+			__v = le16_to_cpu(__raw_readw(p));	\
+		}						\
+								\
+		__v;						\
+	})
+
+#define ioread32(p)						\
+	({							\
+		unsigned int __v;				\
+								\
+		if (__is_io_address(p)) {			\
+			__v = __raw_readl(p);			\
+		} else {					\
+			__v = le32_to_cpu(__raw_readl(p));	\
+		}						\
+								\
+		 __v;						\
+	})
+
+#define iowrite8(v,p)						\
+	({							\
+		if (__is_io_address(p)) {			\
+			__raw_writeb((v), alignb(p));		\
+		} else {					\
+			__raw_writeb((v), p);			\
+		}						\
+	})
+
+#define iowrite16(v,p)						\
+	({							\
+		if (__is_io_address(p)) {			\
+			__raw_writew((v), alignw(p));		\
+		} else {					\
+			__raw_writew(cpu_to_le16(v), p);	\
+		}						\
+	})
+
+#define iowrite32(v,p)						\
+	({							\
+		if (__is_io_address(p)) {			\
+			__raw_writel((v), p);			\
+		} else {					\
+			__raw_writel(cpu_to_le32(v), p);	\
+		}						\
+	})
+
+#define ioport_map(port, nr)	___io(port)
+
+#define ioport_unmap(addr)
+#else
+#define __io(p)			((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
+#endif
+
+
+#endif
diff --git a/arch/arm/mach-ixp2000/include/mach/irqs.h b/arch/arm/mach-ixp2000/include/mach/irqs.h
new file mode 100644
index 0000000..bee96bc
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/irqs.h
@@ -0,0 +1,207 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/irqs.h
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IRQS_H
+#define _IRQS_H
+
+/*
+ * Do NOT add #ifdef MACHINE_FOO in here.
+ * Simpy add your machine IRQs here and increase NR_IRQS if needed to
+ * hold your machine's IRQ table.
+ */
+
+/*
+ * Some interrupt numbers go unused b/c the IRQ mask/ummask/status
+ * register has those bit reserved. We just mark those interrupts
+ * as invalid and this allows us to do mask/unmask with a single
+ * shift operation instead of having to map the IRQ number to
+ * a HW IRQ number.
+ */
+#define	IRQ_IXP2000_SOFT_INT		0 /* soft interrupt */
+#define	IRQ_IXP2000_ERRSUM		1 /* OR of all bits in ErrorStatus reg*/
+#define	IRQ_IXP2000_UART		2
+#define	IRQ_IXP2000_GPIO		3
+#define	IRQ_IXP2000_TIMER1     		4
+#define	IRQ_IXP2000_TIMER2     		5
+#define	IRQ_IXP2000_TIMER3     		6
+#define	IRQ_IXP2000_TIMER4     		7
+#define	IRQ_IXP2000_PMU        		8               
+#define	IRQ_IXP2000_SPF        		9  /* Slow port framer IRQ */
+#define	IRQ_IXP2000_DMA1      		10
+#define	IRQ_IXP2000_DMA2      		11
+#define	IRQ_IXP2000_DMA3      		12
+#define	IRQ_IXP2000_PCI_DOORBELL	13
+#define	IRQ_IXP2000_ME_ATTN       	14 
+#define	IRQ_IXP2000_PCI   		15 /* PCI INTA or INTB */
+#define	IRQ_IXP2000_THDA0   		16 /* thread 0-31A */
+#define	IRQ_IXP2000_THDA1  		17 /* thread 32-63A, IXP2800 only */
+#define	IRQ_IXP2000_THDA2		18 /* thread 64-95A */
+#define	IRQ_IXP2000_THDA3 		19 /* thread 96-127A, IXP2800 only */
+#define	IRQ_IXP2000_THDB0		24 /* thread 0-31B */
+#define	IRQ_IXP2000_THDB1		25 /* thread 32-63B, IXP2800 only */
+#define	IRQ_IXP2000_THDB2		26 /* thread 64-95B */
+#define	IRQ_IXP2000_THDB3		27 /* thread 96-127B, IXP2800 only */
+
+/* define generic GPIOs */
+#define IRQ_IXP2000_GPIO0		32
+#define IRQ_IXP2000_GPIO1		33
+#define IRQ_IXP2000_GPIO2		34
+#define IRQ_IXP2000_GPIO3		35
+#define IRQ_IXP2000_GPIO4		36
+#define IRQ_IXP2000_GPIO5		37
+#define IRQ_IXP2000_GPIO6		38
+#define IRQ_IXP2000_GPIO7		39
+
+/* split off the 2 PCI sources */
+#define IRQ_IXP2000_PCIA		40
+#define IRQ_IXP2000_PCIB		41
+
+/* Int sources from IRQ_ERROR_STATUS */
+#define IRQ_IXP2000_DRAM0_MIN_ERR	42
+#define IRQ_IXP2000_DRAM0_MAJ_ERR	43
+#define IRQ_IXP2000_DRAM1_MIN_ERR	44
+#define IRQ_IXP2000_DRAM1_MAJ_ERR	45
+#define IRQ_IXP2000_DRAM2_MIN_ERR	46
+#define IRQ_IXP2000_DRAM2_MAJ_ERR	47
+/* 48-57 reserved */
+#define IRQ_IXP2000_SRAM0_ERR		58
+#define IRQ_IXP2000_SRAM1_ERR		59
+#define IRQ_IXP2000_SRAM2_ERR		60
+#define IRQ_IXP2000_SRAM3_ERR		61
+/* 62-65 reserved */
+#define IRQ_IXP2000_MEDIA_ERR		66
+#define IRQ_IXP2000_PCI_ERR			67
+#define IRQ_IXP2000_SP_INT			68
+
+#define NR_IXP2000_IRQS				69
+
+#define	IXP2000_BOARD_IRQ(x)		(NR_IXP2000_IRQS + (x))
+
+#define	IXP2000_BOARD_IRQ_MASK(irq)	(1 << (irq - NR_IXP2000_IRQS))	
+
+#define IXP2000_ERR_IRQ_MASK(irq) ( 1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))
+#define IXP2000_VALID_ERR_IRQ_MASK (\
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MIN_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MAJ_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MIN_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MAJ_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MIN_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MAJ_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM0_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM1_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM2_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM3_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_MEDIA_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_PCI_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SP_INT)	)
+
+/*
+ * This allows for all the on-chip sources plus up to 32 CPLD based
+ * IRQs. Should be more than enough.
+ */
+#define	IXP2000_BOARD_IRQS		32
+#define NR_IRQS				(NR_IXP2000_IRQS + IXP2000_BOARD_IRQS)
+
+
+/* 
+ * IXDP2400 specific IRQs
+ */
+#define	IRQ_IXDP2400_INGRESS_NPU	IXP2000_BOARD_IRQ(0) 
+#define	IRQ_IXDP2400_ENET		IXP2000_BOARD_IRQ(1) 
+#define	IRQ_IXDP2400_MEDIA_PCI		IXP2000_BOARD_IRQ(2) 
+#define	IRQ_IXDP2400_MEDIA_SP		IXP2000_BOARD_IRQ(3) 
+#define	IRQ_IXDP2400_SF_PCI		IXP2000_BOARD_IRQ(4) 
+#define	IRQ_IXDP2400_SF_SP		IXP2000_BOARD_IRQ(5) 
+#define	IRQ_IXDP2400_PMC		IXP2000_BOARD_IRQ(6) 
+#define	IRQ_IXDP2400_TVM		IXP2000_BOARD_IRQ(7) 
+
+#define	NR_IXDP2400_IRQS		((IRQ_IXDP2400_TVM)+1)  
+#define	IXDP2400_NR_IRQS		NR_IXDP2400_IRQS - NR_IXP2000_IRQS
+
+/* IXDP2800 specific IRQs */
+#define IRQ_IXDP2800_EGRESS_ENET	IXP2000_BOARD_IRQ(0)
+#define IRQ_IXDP2800_INGRESS_NPU	IXP2000_BOARD_IRQ(1)
+#define IRQ_IXDP2800_PMC		IXP2000_BOARD_IRQ(2)
+#define IRQ_IXDP2800_FABRIC_PCI		IXP2000_BOARD_IRQ(3)
+#define IRQ_IXDP2800_FABRIC		IXP2000_BOARD_IRQ(4)
+#define IRQ_IXDP2800_MEDIA		IXP2000_BOARD_IRQ(5)
+
+#define	NR_IXDP2800_IRQS		((IRQ_IXDP2800_MEDIA)+1)
+#define	IXDP2800_NR_IRQS		NR_IXDP2800_IRQS - NR_IXP2000_IRQS
+
+/* 
+ * IRQs on both IXDP2x01 boards
+ */
+#define IRQ_IXDP2X01_SPCI_DB_0		IXP2000_BOARD_IRQ(2)
+#define IRQ_IXDP2X01_SPCI_DB_1		IXP2000_BOARD_IRQ(3)
+#define IRQ_IXDP2X01_SPCI_PMC_INTA	IXP2000_BOARD_IRQ(4)
+#define IRQ_IXDP2X01_SPCI_PMC_INTB	IXP2000_BOARD_IRQ(5)
+#define IRQ_IXDP2X01_SPCI_PMC_INTC	IXP2000_BOARD_IRQ(6)
+#define IRQ_IXDP2X01_SPCI_PMC_INTD	IXP2000_BOARD_IRQ(7)
+#define IRQ_IXDP2X01_SPCI_FIC_INT	IXP2000_BOARD_IRQ(8)
+#define IRQ_IXDP2X01_IPMI_FROM		IXP2000_BOARD_IRQ(16)
+#define IRQ_IXDP2X01_125US		IXP2000_BOARD_IRQ(17)
+#define IRQ_IXDP2X01_DB_0_ADD		IXP2000_BOARD_IRQ(18)
+#define IRQ_IXDP2X01_DB_1_ADD		IXP2000_BOARD_IRQ(19)
+#define IRQ_IXDP2X01_UART1		IXP2000_BOARD_IRQ(21)
+#define IRQ_IXDP2X01_UART2		IXP2000_BOARD_IRQ(22)
+#define IRQ_IXDP2X01_FIC_ADD_INT	IXP2000_BOARD_IRQ(24)
+#define IRQ_IXDP2X01_CS8900		IXP2000_BOARD_IRQ(25)
+#define IRQ_IXDP2X01_BBSRAM		IXP2000_BOARD_IRQ(26)
+
+#define IXDP2X01_VALID_IRQ_MASK ( \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_0) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_1) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTA) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTB) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTC) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTD) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_FIC_INT) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_IPMI_FROM) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_125US) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_0_ADD) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_1_ADD) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART1) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART2) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_FIC_ADD_INT) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_CS8900) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_BBSRAM) )
+
+/* 
+ * IXDP2401 specific IRQs
+ */
+#define IRQ_IXDP2401_INTA_82546		IXP2000_BOARD_IRQ(0)
+#define IRQ_IXDP2401_INTB_82546		IXP2000_BOARD_IRQ(1)
+
+#define	IXDP2401_VALID_IRQ_MASK ( \
+		IXDP2X01_VALID_IRQ_MASK | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTA_82546) |\
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTB_82546))
+
+/*
+ * IXDP2801-specific IRQs
+ */
+#define IRQ_IXDP2801_RIV		IXP2000_BOARD_IRQ(0)
+#define IRQ_IXDP2801_CNFG_MEDIA		IXP2000_BOARD_IRQ(27)
+#define IRQ_IXDP2801_CLOCK_REF		IXP2000_BOARD_IRQ(28)
+
+#define	IXDP2801_VALID_IRQ_MASK ( \
+		IXDP2X01_VALID_IRQ_MASK | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_RIV) |\
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CNFG_MEDIA) |\
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CLOCK_REF))
+
+#define	NR_IXDP2X01_IRQS		((IRQ_IXDP2801_CLOCK_REF) + 1)
+
+#endif /*_IRQS_H*/
diff --git a/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h b/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
new file mode 100644
index 0000000..5df8479
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
+ *
+ * Register and other defines for IXDP2[48]00 platforms
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#ifndef _IXDP2X00_H_
+#define _IXDP2X00_H_
+
+/*
+ * On board CPLD memory map
+ */
+#define IXDP2X00_PHYS_CPLD_BASE		0xc7000000
+#define IXDP2X00_VIRT_CPLD_BASE		0xfe000000
+#define IXDP2X00_CPLD_SIZE		0x00100000
+
+
+#define IXDP2X00_CPLD_REG(x)  	\
+	(volatile unsigned long *)(IXDP2X00_VIRT_CPLD_BASE | x)
+
+/*
+ * IXDP2400 CPLD registers
+ */
+#define IXDP2400_CPLD_SYSLED		IXDP2X00_CPLD_REG(0x0)  
+#define IXDP2400_CPLD_DISP_DATA		IXDP2X00_CPLD_REG(0x4)
+#define IXDP2400_CPLD_CLOCK_SPEED	IXDP2X00_CPLD_REG(0x8)
+#define IXDP2400_CPLD_INT_STAT		IXDP2X00_CPLD_REG(0xc)
+#define IXDP2400_CPLD_REV		IXDP2X00_CPLD_REG(0x10)
+#define IXDP2400_CPLD_SYS_CLK_M		IXDP2X00_CPLD_REG(0x14)
+#define IXDP2400_CPLD_SYS_CLK_N		IXDP2X00_CPLD_REG(0x18)
+#define IXDP2400_CPLD_INT_MASK		IXDP2X00_CPLD_REG(0x48)
+
+/*
+ * IXDP2800 CPLD registers
+ */
+#define IXDP2800_CPLD_INT_STAT		IXDP2X00_CPLD_REG(0x0)
+#define IXDP2800_CPLD_INT_MASK		IXDP2X00_CPLD_REG(0x140)
+
+
+#define	IXDP2X00_GPIO_I2C_ENABLE	0x02
+#define	IXDP2X00_GPIO_SCL		0x07
+#define	IXDP2X00_GPIO_SDA		0x06
+
+/*
+ * PCI devfns for on-board devices. We need these to be able to
+ * properly translate IRQs and for device removal.
+ */
+#define	IXDP2400_SLAVE_ENET_DEVFN	0x18	/* Bus 1 */
+#define	IXDP2400_MASTER_ENET_DEVFN	0x20	/* Bus 1 */
+#define	IXDP2400_MEDIA_DEVFN		0x28	/* Bus 1 */
+#define	IXDP2400_SWITCH_FABRIC_DEVFN	0x30	/* Bus 1 */
+
+#define	IXDP2800_SLAVE_ENET_DEVFN	0x20	/* Bus 1 */
+#define	IXDP2800_MASTER_ENET_DEVFN	0x18	/* Bus 1 */
+#define	IXDP2800_SWITCH_FABRIC_DEVFN	0x30	/* Bus 1 */
+
+#define	IXDP2X00_P2P_DEVFN		0x20	/* Bus 0 */
+#define	IXDP2X00_21555_DEVFN		0x30	/* Bus 0 */
+#define IXDP2X00_SLAVE_NPU_DEVFN	0x28	/* Bus 1 */
+#define	IXDP2X00_PMC_DEVFN		0x38	/* Bus 1 */
+#define IXDP2X00_MASTER_NPU_DEVFN	0x38	/* Bus 1 */
+
+#ifndef __ASSEMBLY__
+/*
+ * The master NPU is always PCI master.
+ */
+static inline unsigned int ixdp2x00_master_npu(void)
+{
+	return !!ixp2000_is_pcimaster();
+}
+
+/*
+ * Helper functions used by ixdp2400 and ixdp2800 specific code
+ */
+void ixdp2x00_init_irq(volatile unsigned long*, volatile unsigned long *, unsigned long);
+void ixdp2x00_slave_pci_postinit(void);
+void ixdp2x00_init_machine(void);
+void ixdp2x00_map_io(void);
+
+#endif
+
+#endif /*_IXDP2X00_H_ */
diff --git a/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h b/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
new file mode 100644
index 0000000..4c1f040
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
+ *
+ * Platform definitions for IXDP2X01 && IXDP2801 systems
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista Software, Inc. 
+ *
+ * Based on original code Copyright (c) 2002-2003 Intel Corporation
+ * 
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __IXDP2X01_H__
+#define __IXDP2X01_H__
+
+#define	IXDP2X01_PHYS_CPLD_BASE		0xc6024000
+#define	IXDP2X01_VIRT_CPLD_BASE		0xfe000000
+#define	IXDP2X01_CPLD_REGION_SIZE	0x00100000
+
+#define IXDP2X01_CPLD_VIRT_REG(reg) (volatile unsigned long*)(IXDP2X01_VIRT_CPLD_BASE | reg)
+#define IXDP2X01_CPLD_PHYS_REG(reg) (IXDP2X01_PHYS_CPLD_BASE | reg)
+
+#define IXDP2X01_UART1_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x40)
+#define IXDP2X01_UART1_PHYS_BASE	IXDP2X01_CPLD_PHYS_REG(0x40)
+
+#define IXDP2X01_UART2_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x60)
+#define IXDP2X01_UART2_PHYS_BASE	IXDP2X01_CPLD_PHYS_REG(0x60)
+
+#define IXDP2X01_CS8900_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x80)
+#define IXDP2X01_CS8900_VIRT_END	(IXDP2X01_CS8900_VIRT_BASE + 16)
+
+#define IXDP2X01_CPLD_RESET_REG         IXDP2X01_CPLD_VIRT_REG(0x00)
+#define IXDP2X01_INT_MASK_SET_REG	IXDP2X01_CPLD_VIRT_REG(0x08)
+#define IXDP2X01_INT_STAT_REG		IXDP2X01_CPLD_VIRT_REG(0x0C)
+#define IXDP2X01_INT_RAW_REG		IXDP2X01_CPLD_VIRT_REG(0x10) 
+#define IXDP2X01_INT_MASK_CLR_REG	IXDP2X01_INT_RAW_REG
+#define IXDP2X01_INT_SIM_REG		IXDP2X01_CPLD_VIRT_REG(0x14)
+
+#define IXDP2X01_CPLD_FLASH_REG		IXDP2X01_CPLD_VIRT_REG(0x20)
+
+#define IXDP2X01_CPLD_FLASH_INTERN 	0x8000
+#define IXDP2X01_CPLD_FLASH_BANK_MASK 	0xF
+#define IXDP2X01_FLASH_WINDOW_BITS 	25
+#define IXDP2X01_FLASH_WINDOW_SIZE 	(1 << IXDP2X01_FLASH_WINDOW_BITS)
+#define IXDP2X01_FLASH_WINDOW_MASK 	(IXDP2X01_FLASH_WINDOW_SIZE - 1)
+
+#define	IXDP2X01_UART_CLK		1843200
+
+#define	IXDP2X01_GPIO_I2C_ENABLE	0x02
+#define	IXDP2X01_GPIO_SCL		0x07
+#define	IXDP2X01_GPIO_SDA		0x06
+
+#endif /* __IXDP2x01_H__ */
diff --git a/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h b/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
new file mode 100644
index 0000000..19d8037
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
@@ -0,0 +1,457 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
+ *
+ * Chipset register definitions for IXP2400/2800 based systems.
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ *
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#ifndef _IXP2000_REGS_H_
+#define _IXP2000_REGS_H_
+
+/*
+ * IXP2000 linux memory map:
+ *
+ * virt		phys		size
+ * fb000000	db000000	16M		PCI CFG1
+ * fc000000	da000000	16M		PCI CFG0
+ * fd000000	d8000000	16M		PCI I/O
+ * fe[0-7]00000			8M		per-platform mappings
+ * fe900000	80000000	1M		SRAM #0 (first MB)
+ * fea00000	cb400000	1M		SCRATCH ring get/put
+ * feb00000	c8000000	1M		MSF
+ * fec00000	df000000	1M		PCI CSRs
+ * fed00000	de000000	1M		PCI CREG
+ * fee00000	d6000000	1M		INTCTL
+ * fef00000	c0000000	1M		CAP
+ */
+
+/* 
+ * Static I/O regions.
+ *
+ * Most of the registers are clumped in 4K regions spread throughout
+ * the 0xc0000000 -> 0xc0100000 address range, but we just map in
+ * the whole range using a single 1 MB section instead of small
+ * 4K pages.  This has two advantages for us:
+ *
+ * 1) We use only one TLB entry for large number of on-chip I/O devices.
+ *
+ * 2) We can easily set the Section attributes to XCB=101 on the IXP2400
+ *    as required per erratum #66.  We accomplish this by using a
+ *    new MT_IXP2000_DEVICE memory type with the bits set as required.
+ *
+ * CAP stands for CSR Access Proxy.
+ *
+ * If you change the virtual address of this mapping, please propagate
+ * the change to arch/arm/kernel/debug.S, which hardcodes the virtual
+ * address of the UART located in this region.
+ */
+
+#define	IXP2000_CAP_PHYS_BASE		0xc0000000
+#define	IXP2000_CAP_VIRT_BASE		0xfef00000
+#define	IXP2000_CAP_SIZE		0x00100000
+
+/*
+ * Addresses for specific on-chip peripherals.
+ */
+#define	IXP2000_SLOWPORT_CSR_VIRT_BASE	0xfef80000
+#define	IXP2000_GLOBAL_REG_VIRT_BASE	0xfef04000
+#define	IXP2000_UART_PHYS_BASE		0xc0030000
+#define	IXP2000_UART_VIRT_BASE		0xfef30000
+#define	IXP2000_TIMER_VIRT_BASE		0xfef20000
+#define	IXP2000_UENGINE_CSR_VIRT_BASE	0xfef18000
+#define	IXP2000_GPIO_VIRT_BASE		0xfef10000
+
+/*
+ * Devices outside of the 0xc0000000 -> 0xc0100000 range.  The virtual
+ * addresses of the INTCTL and PCI_CSR mappings are hardcoded in
+ * entry-macro.S, so if you ever change these please propagate
+ * the change.
+ */
+#define IXP2000_INTCTL_PHYS_BASE	0xd6000000
+#define	IXP2000_INTCTL_VIRT_BASE	0xfee00000
+#define	IXP2000_INTCTL_SIZE		0x00100000
+
+#define IXP2000_PCI_CREG_PHYS_BASE	0xde000000
+#define	IXP2000_PCI_CREG_VIRT_BASE	0xfed00000
+#define	IXP2000_PCI_CREG_SIZE		0x00100000
+
+#define IXP2000_PCI_CSR_PHYS_BASE	0xdf000000
+#define	IXP2000_PCI_CSR_VIRT_BASE	0xfec00000
+#define	IXP2000_PCI_CSR_SIZE		0x00100000
+
+#define IXP2000_MSF_PHYS_BASE		0xc8000000
+#define IXP2000_MSF_VIRT_BASE		0xfeb00000
+#define IXP2000_MSF_SIZE		0x00100000
+
+#define IXP2000_SCRATCH_RING_PHYS_BASE	0xcb400000
+#define IXP2000_SCRATCH_RING_VIRT_BASE	0xfea00000
+#define IXP2000_SCRATCH_RING_SIZE	0x00100000
+
+#define IXP2000_SRAM0_PHYS_BASE		0x80000000
+#define IXP2000_SRAM0_VIRT_BASE		0xfe900000
+#define IXP2000_SRAM0_SIZE		0x00100000
+
+#define IXP2000_PCI_IO_PHYS_BASE	0xd8000000
+#define	IXP2000_PCI_IO_VIRT_BASE	0xfd000000
+#define IXP2000_PCI_IO_SIZE     	0x01000000
+
+#define IXP2000_PCI_CFG0_PHYS_BASE	0xda000000
+#define IXP2000_PCI_CFG0_VIRT_BASE	0xfc000000
+#define IXP2000_PCI_CFG0_SIZE   	0x01000000
+
+#define IXP2000_PCI_CFG1_PHYS_BASE	0xdb000000
+#define IXP2000_PCI_CFG1_VIRT_BASE	0xfb000000
+#define IXP2000_PCI_CFG1_SIZE		0x01000000
+
+/* 
+ * Timers
+ */
+#define	IXP2000_TIMER_REG(x)		((volatile unsigned long*)(IXP2000_TIMER_VIRT_BASE | (x)))
+/* Timer control */
+#define	IXP2000_T1_CTL			IXP2000_TIMER_REG(0x00)
+#define	IXP2000_T2_CTL			IXP2000_TIMER_REG(0x04)
+#define	IXP2000_T3_CTL			IXP2000_TIMER_REG(0x08)
+#define	IXP2000_T4_CTL			IXP2000_TIMER_REG(0x0c)
+/* Store initial value */
+#define	IXP2000_T1_CLD			IXP2000_TIMER_REG(0x10)
+#define	IXP2000_T2_CLD			IXP2000_TIMER_REG(0x14)
+#define	IXP2000_T3_CLD			IXP2000_TIMER_REG(0x18)
+#define	IXP2000_T4_CLD			IXP2000_TIMER_REG(0x1c)
+/* Read current value */
+#define	IXP2000_T1_CSR			IXP2000_TIMER_REG(0x20)
+#define	IXP2000_T2_CSR			IXP2000_TIMER_REG(0x24)
+#define	IXP2000_T3_CSR			IXP2000_TIMER_REG(0x28)
+#define	IXP2000_T4_CSR			IXP2000_TIMER_REG(0x2c)
+/* Clear associated timer interrupt */
+#define	IXP2000_T1_CLR			IXP2000_TIMER_REG(0x30)
+#define	IXP2000_T2_CLR			IXP2000_TIMER_REG(0x34)
+#define	IXP2000_T3_CLR			IXP2000_TIMER_REG(0x38)
+#define	IXP2000_T4_CLR			IXP2000_TIMER_REG(0x3c)
+/* Timer watchdog enable for T4 */
+#define	IXP2000_TWDE			IXP2000_TIMER_REG(0x40)
+
+#define	WDT_ENABLE			0x00000001
+#define	TIMER_DIVIDER_256		0x00000008
+#define	TIMER_ENABLE			0x00000080
+#define	IRQ_MASK_TIMER1         	(1 << 4)
+
+/*
+ * Interrupt controller registers
+ */
+#define IXP2000_INTCTL_REG(x)		(volatile unsigned long*)(IXP2000_INTCTL_VIRT_BASE | (x))
+#define IXP2000_IRQ_STATUS		IXP2000_INTCTL_REG(0x08)
+#define IXP2000_IRQ_ENABLE		IXP2000_INTCTL_REG(0x10)
+#define IXP2000_IRQ_ENABLE_SET		IXP2000_INTCTL_REG(0x10)
+#define IXP2000_IRQ_ENABLE_CLR		IXP2000_INTCTL_REG(0x18)
+#define IXP2000_FIQ_ENABLE_CLR		IXP2000_INTCTL_REG(0x14)
+#define IXP2000_IRQ_ERR_STATUS		IXP2000_INTCTL_REG(0x24)
+#define IXP2000_IRQ_ERR_ENABLE_SET	IXP2000_INTCTL_REG(0x2c)
+#define IXP2000_FIQ_ERR_ENABLE_CLR	IXP2000_INTCTL_REG(0x30)
+#define IXP2000_IRQ_ERR_ENABLE_CLR	IXP2000_INTCTL_REG(0x34)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_0	IXP2000_INTCTL_REG(0x60)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_1	IXP2000_INTCTL_REG(0x64)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_2	IXP2000_INTCTL_REG(0x68)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_3	IXP2000_INTCTL_REG(0x6c)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_0	IXP2000_INTCTL_REG(0x80)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_1	IXP2000_INTCTL_REG(0x84)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_2	IXP2000_INTCTL_REG(0x88)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_3	IXP2000_INTCTL_REG(0x8c)
+#define IXP2000_IRQ_THD_STATUS_A_0	IXP2000_INTCTL_REG(0xe0)
+#define IXP2000_IRQ_THD_STATUS_A_1	IXP2000_INTCTL_REG(0xe4)
+#define IXP2000_IRQ_THD_STATUS_A_2	IXP2000_INTCTL_REG(0xe8)
+#define IXP2000_IRQ_THD_STATUS_A_3	IXP2000_INTCTL_REG(0xec)
+#define IXP2000_IRQ_THD_STATUS_B_0	IXP2000_INTCTL_REG(0x100)
+#define IXP2000_IRQ_THD_STATUS_B_1	IXP2000_INTCTL_REG(0x104)
+#define IXP2000_IRQ_THD_STATUS_B_2	IXP2000_INTCTL_REG(0x108)
+#define IXP2000_IRQ_THD_STATUS_B_3	IXP2000_INTCTL_REG(0x10c)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_0	IXP2000_INTCTL_REG(0x160)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_1	IXP2000_INTCTL_REG(0x164)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_2	IXP2000_INTCTL_REG(0x168)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_3	IXP2000_INTCTL_REG(0x16c)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_0	IXP2000_INTCTL_REG(0x180)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_1	IXP2000_INTCTL_REG(0x184)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_2	IXP2000_INTCTL_REG(0x188)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_3	IXP2000_INTCTL_REG(0x18c)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_0	IXP2000_INTCTL_REG(0x1e0)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_1	IXP2000_INTCTL_REG(0x1e4)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_2	IXP2000_INTCTL_REG(0x1e8)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_3	IXP2000_INTCTL_REG(0x1ec)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_0	IXP2000_INTCTL_REG(0x200)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_1	IXP2000_INTCTL_REG(0x204)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_2	IXP2000_INTCTL_REG(0x208)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_3	IXP2000_INTCTL_REG(0x20c)
+
+/*
+ * Mask of valid IRQs in the 32-bit IRQ register. We use
+ * this to mark certain IRQs as being invalid.
+ */
+#define	IXP2000_VALID_IRQ_MASK	0x0f0fffff
+
+/*
+ * PCI config register access from core
+ */
+#define IXP2000_PCI_CREG(x)		(volatile unsigned long*)(IXP2000_PCI_CREG_VIRT_BASE | (x))
+#define IXP2000_PCI_CMDSTAT 		IXP2000_PCI_CREG(0x04)
+#define IXP2000_PCI_CSR_BAR		IXP2000_PCI_CREG(0x10)
+#define IXP2000_PCI_SRAM_BAR		IXP2000_PCI_CREG(0x14)
+#define IXP2000_PCI_SDRAM_BAR		IXP2000_PCI_CREG(0x18)
+
+/*
+ * PCI CSRs
+ */
+#define IXP2000_PCI_CSR(x)		(volatile unsigned long*)(IXP2000_PCI_CSR_VIRT_BASE | (x))
+
+/*
+ * PCI outbound interrupts
+ */
+#define IXP2000_PCI_OUT_INT_STATUS	IXP2000_PCI_CSR(0x30)
+#define IXP2000_PCI_OUT_INT_MASK	IXP2000_PCI_CSR(0x34)
+/*
+ * PCI communications
+ */
+#define IXP2000_PCI_MAILBOX0		IXP2000_PCI_CSR(0x50)
+#define IXP2000_PCI_MAILBOX1		IXP2000_PCI_CSR(0x54)
+#define IXP2000_PCI_MAILBOX2		IXP2000_PCI_CSR(0x58)
+#define IXP2000_PCI_MAILBOX3		IXP2000_PCI_CSR(0x5C)
+#define IXP2000_XSCALE_DOORBELL		IXP2000_PCI_CSR(0x60)
+#define IXP2000_XSCALE_DOORBELL_SETUP	IXP2000_PCI_CSR(0x64)
+#define IXP2000_PCI_DOORBELL		IXP2000_PCI_CSR(0x70)
+#define IXP2000_PCI_DOORBELL_SETUP	IXP2000_PCI_CSR(0x74)
+
+/*
+ * DMA engines
+ */
+#define IXP2000_PCI_CH1_BYTE_CNT	IXP2000_PCI_CSR(0x80)
+#define IXP2000_PCI_CH1_ADDR		IXP2000_PCI_CSR(0x84)
+#define IXP2000_PCI_CH1_DRAM_ADDR	IXP2000_PCI_CSR(0x88)
+#define IXP2000_PCI_CH1_DESC_PTR	IXP2000_PCI_CSR(0x8C)
+#define IXP2000_PCI_CH1_CNTRL		IXP2000_PCI_CSR(0x90)
+#define IXP2000_PCI_CH1_ME_PARAM	IXP2000_PCI_CSR(0x94)
+#define IXP2000_PCI_CH2_BYTE_CNT	IXP2000_PCI_CSR(0xA0)
+#define IXP2000_PCI_CH2_ADDR		IXP2000_PCI_CSR(0xA4)
+#define IXP2000_PCI_CH2_DRAM_ADDR	IXP2000_PCI_CSR(0xA8)
+#define IXP2000_PCI_CH2_DESC_PTR	IXP2000_PCI_CSR(0xAC)
+#define IXP2000_PCI_CH2_CNTRL		IXP2000_PCI_CSR(0xB0)
+#define IXP2000_PCI_CH2_ME_PARAM	IXP2000_PCI_CSR(0xB4)
+#define IXP2000_PCI_CH3_BYTE_CNT	IXP2000_PCI_CSR(0xC0)
+#define IXP2000_PCI_CH3_ADDR		IXP2000_PCI_CSR(0xC4)
+#define IXP2000_PCI_CH3_DRAM_ADDR	IXP2000_PCI_CSR(0xC8)
+#define IXP2000_PCI_CH3_DESC_PTR	IXP2000_PCI_CSR(0xCC)
+#define IXP2000_PCI_CH3_CNTRL		IXP2000_PCI_CSR(0xD0)
+#define IXP2000_PCI_CH3_ME_PARAM	IXP2000_PCI_CSR(0xD4)
+#define IXP2000_DMA_INF_MODE		IXP2000_PCI_CSR(0xE0)
+/*
+ * Size masks for BARs
+ */
+#define IXP2000_PCI_SRAM_BASE_ADDR_MASK	IXP2000_PCI_CSR(0xFC)
+#define IXP2000_PCI_DRAM_BASE_ADDR_MASK	IXP2000_PCI_CSR(0x100)
+/*
+ * Control and uEngine related
+ */
+#define IXP2000_PCI_CONTROL		IXP2000_PCI_CSR(0x13C)
+#define IXP2000_PCI_ADDR_EXT		IXP2000_PCI_CSR(0x140)
+#define IXP2000_PCI_ME_PUSH_STATUS	IXP2000_PCI_CSR(0x148)
+#define IXP2000_PCI_ME_PUSH_EN		IXP2000_PCI_CSR(0x14C)
+#define IXP2000_PCI_ERR_STATUS		IXP2000_PCI_CSR(0x150)
+#define IXP2000_PCI_ERR_ENABLE		IXP2000_PCI_CSR(0x154)
+/*
+ * Inbound PCI interrupt control
+ */
+#define IXP2000_PCI_XSCALE_INT_STATUS	IXP2000_PCI_CSR(0x158)
+#define IXP2000_PCI_XSCALE_INT_ENABLE	IXP2000_PCI_CSR(0x15C)
+
+#define IXP2000_PCICNTL_PNR		(1<<17)	/* PCI not Reset bit of PCI_CONTROL */
+#define IXP2000_PCICNTL_PCF		(1<<28)	/* PCI Central function bit */
+#define IXP2000_XSCALE_INT		(1<<1)	/* Interrupt from XScale to PCI */
+
+/* These are from the IRQ register in the PCI ISR register */
+#define PCI_CONTROL_BE_DEO		(1 << 22)	/* Big Endian Data Enable Out */
+#define PCI_CONTROL_BE_DEI		(1 << 21)	/* Big Endian Data Enable In  */
+#define PCI_CONTROL_BE_BEO		(1 << 20)	/* Big Endian Byte Enable Out */
+#define PCI_CONTROL_BE_BEI		(1 << 19)	/* Big Endian Byte Enable In  */
+#define PCI_CONTROL_IEE			(1 << 17)	/* I/O cycle Endian swap Enable */
+
+#define IXP2000_PCI_RST_REL		(1 << 2)
+#define CFG_RST_DIR			(*IXP2000_PCI_CONTROL & IXP2000_PCICNTL_PCF)
+#define CFG_PCI_BOOT_HOST		(1 << 2)
+#define CFG_BOOT_PROM			(1 << 1)
+
+/*
+ * SlowPort CSRs
+ *
+ * The slowport is used to access things like flash, SONET framer control
+ * ports, slave microprocessors, CPLDs, and others of chip memory mapped
+ * peripherals.
+ */
+#define	SLOWPORT_CSR(x)		(volatile unsigned long*)(IXP2000_SLOWPORT_CSR_VIRT_BASE | (x))
+
+#define	IXP2000_SLOWPORT_CCR		SLOWPORT_CSR(0x00)
+#define	IXP2000_SLOWPORT_WTC1		SLOWPORT_CSR(0x04)
+#define	IXP2000_SLOWPORT_WTC2		SLOWPORT_CSR(0x08)
+#define	IXP2000_SLOWPORT_RTC1		SLOWPORT_CSR(0x0c)
+#define	IXP2000_SLOWPORT_RTC2		SLOWPORT_CSR(0x10)
+#define	IXP2000_SLOWPORT_FSR		SLOWPORT_CSR(0x14)
+#define	IXP2000_SLOWPORT_PCR		SLOWPORT_CSR(0x18)
+#define	IXP2000_SLOWPORT_ADC		SLOWPORT_CSR(0x1C)
+#define	IXP2000_SLOWPORT_FAC		SLOWPORT_CSR(0x20)
+#define	IXP2000_SLOWPORT_FRM		SLOWPORT_CSR(0x24)
+#define	IXP2000_SLOWPORT_FIN		SLOWPORT_CSR(0x28)
+
+/*
+ * CCR values.  
+ * The CCR configures the clock division for the slowport interface.
+ */
+#define	SLOWPORT_CCR_DIV_1		0x00
+#define	SLOWPORT_CCR_DIV_2		0x01
+#define	SLOWPORT_CCR_DIV_4		0x02
+#define	SLOWPORT_CCR_DIV_6		0x03
+#define	SLOWPORT_CCR_DIV_8		0x04
+#define	SLOWPORT_CCR_DIV_10		0x05
+#define	SLOWPORT_CCR_DIV_12		0x06
+#define	SLOWPORT_CCR_DIV_14		0x07
+#define	SLOWPORT_CCR_DIV_16		0x08
+#define	SLOWPORT_CCR_DIV_18		0x09
+#define	SLOWPORT_CCR_DIV_20		0x0a
+#define	SLOWPORT_CCR_DIV_22		0x0b
+#define	SLOWPORT_CCR_DIV_24		0x0c
+#define	SLOWPORT_CCR_DIV_26		0x0d
+#define	SLOWPORT_CCR_DIV_28		0x0e
+#define	SLOWPORT_CCR_DIV_30		0x0f
+
+/*
+ * PCR values.  PCR configure the mode of the interface.
+ */
+#define	SLOWPORT_MODE_FLASH		0x00
+#define	SLOWPORT_MODE_LUCENT		0x01
+#define	SLOWPORT_MODE_PMC_SIERRA	0x02
+#define	SLOWPORT_MODE_INTEL_UP		0x03
+#define	SLOWPORT_MODE_MOTOROLA_UP	0x04
+
+/*
+ * ADC values.  Defines data and address bus widths.
+ */
+#define	SLOWPORT_ADDR_WIDTH_8		0x00
+#define	SLOWPORT_ADDR_WIDTH_16		0x01
+#define	SLOWPORT_ADDR_WIDTH_24		0x02
+#define	SLOWPORT_ADDR_WIDTH_32		0x03
+#define	SLOWPORT_DATA_WIDTH_8		0x00
+#define	SLOWPORT_DATA_WIDTH_16		0x10
+#define	SLOWPORT_DATA_WIDTH_24		0x20
+#define	SLOWPORT_DATA_WIDTH_32		0x30
+
+/*
+ * Masks and shifts for various fields in the WTC and RTC registers.
+ */
+#define	SLOWPORT_WRTC_MASK_HD		0x0003
+#define	SLOWPORT_WRTC_MASK_PW		0x003c
+#define	SLOWPORT_WRTC_MASK_SU		0x03c0
+
+#define	SLOWPORT_WRTC_SHIFT_HD		0x00
+#define	SLOWPORT_WRTC_SHIFT_SU		0x02
+#define	SLOWPORT_WRTC_SHFIT_PW		0x06
+
+
+/*
+ * GPIO registers & GPIO interface.
+ */
+#define IXP2000_GPIO_REG(x)		((volatile unsigned long*)(IXP2000_GPIO_VIRT_BASE+(x)))
+#define IXP2000_GPIO_PLR		IXP2000_GPIO_REG(0x00)
+#define IXP2000_GPIO_PDPR		IXP2000_GPIO_REG(0x04)
+#define IXP2000_GPIO_PDSR		IXP2000_GPIO_REG(0x08)
+#define IXP2000_GPIO_PDCR		IXP2000_GPIO_REG(0x0c)
+#define IXP2000_GPIO_POPR		IXP2000_GPIO_REG(0x10)
+#define IXP2000_GPIO_POSR		IXP2000_GPIO_REG(0x14)
+#define IXP2000_GPIO_POCR		IXP2000_GPIO_REG(0x18)
+#define IXP2000_GPIO_REDR		IXP2000_GPIO_REG(0x1c)
+#define IXP2000_GPIO_FEDR		IXP2000_GPIO_REG(0x20)
+#define IXP2000_GPIO_EDSR		IXP2000_GPIO_REG(0x24)
+#define IXP2000_GPIO_LSHR		IXP2000_GPIO_REG(0x28)
+#define IXP2000_GPIO_LSLR		IXP2000_GPIO_REG(0x2c)
+#define IXP2000_GPIO_LDSR		IXP2000_GPIO_REG(0x30)
+#define IXP2000_GPIO_INER		IXP2000_GPIO_REG(0x34)
+#define IXP2000_GPIO_INSR		IXP2000_GPIO_REG(0x38)
+#define IXP2000_GPIO_INCR		IXP2000_GPIO_REG(0x3c)
+#define IXP2000_GPIO_INST		IXP2000_GPIO_REG(0x40)
+
+/*
+ * "Global" registers...whatever that's supposed to mean.
+ */
+#define GLOBAL_REG_BASE			(IXP2000_GLOBAL_REG_VIRT_BASE + 0x0a00)
+#define GLOBAL_REG(x)			(volatile unsigned long*)(GLOBAL_REG_BASE | (x))
+
+#define IXP2000_MAJ_PROD_TYPE_MASK	0x001F0000
+#define IXP2000_MAJ_PROD_TYPE_IXP2000	0x00000000
+#define IXP2000_MIN_PROD_TYPE_MASK 	0x0000FF00
+#define IXP2000_MIN_PROD_TYPE_IXP2400	0x00000200
+#define IXP2000_MIN_PROD_TYPE_IXP2850	0x00000100
+#define IXP2000_MIN_PROD_TYPE_IXP2800	0x00000000
+#define IXP2000_MAJ_REV_MASK	      	0x000000F0
+#define IXP2000_MIN_REV_MASK	      	0x0000000F
+#define IXP2000_PROD_ID_MASK		0xFFFFFFFF
+
+#define IXP2000_PRODUCT_ID		GLOBAL_REG(0x00)
+#define IXP2000_MISC_CONTROL		GLOBAL_REG(0x04)
+#define IXP2000_MSF_CLK_CNTRL  		GLOBAL_REG(0x08)
+#define IXP2000_RESET0      		GLOBAL_REG(0x0c)
+#define IXP2000_RESET1      		GLOBAL_REG(0x10)
+#define IXP2000_CCR            		GLOBAL_REG(0x14)
+#define	IXP2000_STRAP_OPTIONS  		GLOBAL_REG(0x18)
+
+#define	RSTALL				(1 << 16)
+#define	WDT_RESET_ENABLE		0x01000000
+
+
+/*
+ * MSF registers.  The IXP2400 and IXP2800 have somewhat different MSF
+ * units, but the registers that differ between the two don't overlap,
+ * so we can have one register list for both.
+ */
+#define IXP2000_MSF_REG(x)			((volatile unsigned long*)(IXP2000_MSF_VIRT_BASE + (x)))
+#define IXP2000_MSF_RX_CONTROL			IXP2000_MSF_REG(0x0000)
+#define IXP2000_MSF_TX_CONTROL			IXP2000_MSF_REG(0x0004)
+#define IXP2000_MSF_INTERRUPT_STATUS		IXP2000_MSF_REG(0x0008)
+#define IXP2000_MSF_INTERRUPT_ENABLE		IXP2000_MSF_REG(0x000c)
+#define IXP2000_MSF_CSIX_TYPE_MAP		IXP2000_MSF_REG(0x0010)
+#define IXP2000_MSF_FC_EGRESS_STATUS		IXP2000_MSF_REG(0x0014)
+#define IXP2000_MSF_FC_INGRESS_STATUS		IXP2000_MSF_REG(0x0018)
+#define IXP2000_MSF_HWM_CONTROL			IXP2000_MSF_REG(0x0024)
+#define IXP2000_MSF_FC_STATUS_OVERRIDE		IXP2000_MSF_REG(0x0028)
+#define IXP2000_MSF_CLOCK_CONTROL		IXP2000_MSF_REG(0x002c)
+#define IXP2000_MSF_RX_PORT_MAP			IXP2000_MSF_REG(0x0040)
+#define IXP2000_MSF_RBUF_ELEMENT_DONE		IXP2000_MSF_REG(0x0044)
+#define IXP2000_MSF_RX_MPHY_POLL_LIMIT		IXP2000_MSF_REG(0x0048)
+#define IXP2000_MSF_RX_CALENDAR_LENGTH		IXP2000_MSF_REG(0x0048)
+#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_0	IXP2000_MSF_REG(0x0050)
+#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_1	IXP2000_MSF_REG(0x0054)
+#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_2	IXP2000_MSF_REG(0x0058)
+#define IXP2000_MSF_TX_SEQUENCE_0		IXP2000_MSF_REG(0x0060)
+#define IXP2000_MSF_TX_SEQUENCE_1		IXP2000_MSF_REG(0x0064)
+#define IXP2000_MSF_TX_SEQUENCE_2		IXP2000_MSF_REG(0x0068)
+#define IXP2000_MSF_TX_MPHY_POLL_LIMIT		IXP2000_MSF_REG(0x0070)
+#define IXP2000_MSF_TX_CALENDAR_LENGTH		IXP2000_MSF_REG(0x0070)
+#define IXP2000_MSF_RX_UP_CONTROL_0		IXP2000_MSF_REG(0x0080)
+#define IXP2000_MSF_RX_UP_CONTROL_1		IXP2000_MSF_REG(0x0084)
+#define IXP2000_MSF_RX_UP_CONTROL_2		IXP2000_MSF_REG(0x0088)
+#define IXP2000_MSF_RX_UP_CONTROL_3		IXP2000_MSF_REG(0x008c)
+#define IXP2000_MSF_TX_UP_CONTROL_0		IXP2000_MSF_REG(0x0090)
+#define IXP2000_MSF_TX_UP_CONTROL_1		IXP2000_MSF_REG(0x0094)
+#define IXP2000_MSF_TX_UP_CONTROL_2		IXP2000_MSF_REG(0x0098)
+#define IXP2000_MSF_TX_UP_CONTROL_3		IXP2000_MSF_REG(0x009c)
+#define IXP2000_MSF_TRAIN_DATA			IXP2000_MSF_REG(0x00a0)
+#define IXP2000_MSF_TRAIN_CALENDAR		IXP2000_MSF_REG(0x00a4)
+#define IXP2000_MSF_TRAIN_FLOW_CONTROL		IXP2000_MSF_REG(0x00a8)
+#define IXP2000_MSF_TX_CALENDAR_0		IXP2000_MSF_REG(0x1000)
+#define IXP2000_MSF_RX_PORT_CALENDAR_STATUS	IXP2000_MSF_REG(0x1400)
+
+
+#endif				/* _IXP2000_H_ */
diff --git a/arch/arm/mach-ixp2000/include/mach/memory.h b/arch/arm/mach-ixp2000/include/mach/memory.h
new file mode 100644
index 0000000..241529a
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/memory.h
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/memory.h
+ *
+ * Copyright (c) 2002 Intel Corp.
+ * Copyright (c) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET	UL(0x00000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#include <mach/ixp2000-regs.h>
+
+#define __virt_to_bus(v) \
+	(((__virt_to_phys(v) - 0x0) + (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)))
+
+#define __bus_to_virt(b) \
+	__phys_to_virt((((b - (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)) + 0x0)))
+
+#endif
+
diff --git a/arch/arm/mach-ixp2000/include/mach/platform.h b/arch/arm/mach-ixp2000/include/mach/platform.h
new file mode 100644
index 0000000..42182c79
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/platform.h
@@ -0,0 +1,152 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/platform.h
+ *
+ * Various bits of code used by platform-level code.
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista Software, Inc. 
+ * 
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long ixp2000_reg_read(volatile void *reg)
+{
+	return *((volatile unsigned long *)reg);
+}
+
+static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
+{
+	*((volatile unsigned long *)reg) = val;
+}
+
+/*
+ * On the IXP2400, we can't use XCB=000 due to chip bugs.  We use
+ * XCB=101 instead, but that makes all I/O accesses bufferable.  This
+ * is not a problem in general, but we do have to be slightly more
+ * careful because I/O writes are no longer automatically flushed out
+ * of the write buffer.
+ *
+ * In cases where we want to make sure that a write has been flushed
+ * out of the write buffer before we proceed, for example when masking
+ * a device interrupt before re-enabling IRQs in CPSR, we can use this
+ * function, ixp2000_reg_wrb, which performs a write, a readback, and
+ * issues a dummy instruction dependent on the value of the readback
+ * (mov rX, rX) to make sure that the readback has completed before we
+ * continue.
+ */
+static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
+{
+	unsigned long dummy;
+
+	*((volatile unsigned long *)reg) = val;
+
+	dummy = *((volatile unsigned long *)reg);
+	__asm__ __volatile__("mov %0, %0" : "+r" (dummy));
+}
+
+/*
+ * Boards may multiplex different devices on the 2nd channel of 
+ * the slowport interface that each need different configuration 
+ * settings.  For example, the IXDP2400 uses channel 2 on the interface 
+ * to access the CPLD, the switch fabric card, and the media card.  Each
+ * one needs a different mode so drivers must save/restore the mode 
+ * before and after each operation.  
+ *
+ * acquire_slowport(&your_config);
+ * ...
+ * do slowport operations
+ * ...
+ * release_slowport();
+ *
+ * Note that while you have the slowport, you are holding a spinlock,
+ * so your code should be written as if you explicitly acquired a lock.
+ *
+ * The configuration only affects device 2 on the slowport, so the
+ * MTD map driver does not acquire/release the slowport.  
+ */
+struct slowport_cfg {
+	unsigned long CCR;	/* Clock divide */
+	unsigned long WTC;	/* Write Timing Control */
+	unsigned long RTC;	/* Read Timing Control */
+	unsigned long PCR;	/* Protocol Control Register */
+	unsigned long ADC;	/* Address/Data Width Control */
+};
+
+
+void ixp2000_acquire_slowport(struct slowport_cfg *, struct slowport_cfg *);
+void ixp2000_release_slowport(struct slowport_cfg *);
+
+/*
+ * IXP2400 A0/A1 and  IXP2800 A0/A1/A2 have broken slowport that requires
+ * tweaking of addresses in the MTD driver.
+ */
+static inline unsigned ixp2000_has_broken_slowport(void)
+{
+	unsigned long id = *IXP2000_PRODUCT_ID;
+	unsigned long id_prod = id & (IXP2000_MAJ_PROD_TYPE_MASK |
+				      IXP2000_MIN_PROD_TYPE_MASK);
+	return (((id_prod ==
+		  /* fixed in IXP2400-B0 */
+		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
+		   IXP2000_MIN_PROD_TYPE_IXP2400)) &&
+		 ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
+		((id_prod ==
+		  /* fixed in IXP2800-B0 */
+		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
+		   IXP2000_MIN_PROD_TYPE_IXP2800)) &&
+		 ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
+		((id_prod ==
+		  /* fixed in IXP2850-B0 */
+		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
+		   IXP2000_MIN_PROD_TYPE_IXP2850)) &&
+		 ((id & IXP2000_MAJ_REV_MASK) == 0)));
+}
+
+static inline unsigned int ixp2000_has_flash(void)
+{
+	return ((*IXP2000_STRAP_OPTIONS) & (CFG_BOOT_PROM));
+}
+
+static inline unsigned int ixp2000_is_pcimaster(void)
+{
+	return ((*IXP2000_STRAP_OPTIONS) & (CFG_PCI_BOOT_HOST));
+}
+
+void ixp2000_map_io(void);
+void ixp2000_uart_init(void);
+void ixp2000_init_irq(void);
+void ixp2000_init_time(unsigned long);
+unsigned long ixp2000_gettimeoffset(void);
+
+struct pci_sys_data;
+
+u32 *ixp2000_pci_config_addr(unsigned int bus, unsigned int devfn, int where);
+void ixp2000_pci_preinit(void);
+int ixp2000_pci_setup(int, struct pci_sys_data*);
+struct pci_bus* ixp2000_pci_scan_bus(int, struct pci_sys_data*);
+int ixp2000_pci_read_config(struct pci_bus*, unsigned int, int, int, u32 *);
+int ixp2000_pci_write_config(struct pci_bus*, unsigned int, int, int, u32);
+
+/*
+ * Several of the IXP2000 systems have banked flash so we need to extend the
+ * flash_platform_data structure with some private pointers
+ */
+struct ixp2000_flash_data {
+	struct flash_platform_data *platform_data;
+	int nr_banks;
+	unsigned long (*bank_setup)(unsigned long);
+};
+
+struct ixp2000_i2c_pins {
+	unsigned long sda_pin;
+	unsigned long scl_pin;
+};
+
+
+#endif /*  !__ASSEMBLY__ */
diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h
new file mode 100644
index 0000000..2e9c68f
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/system.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/system.h
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyricht (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	local_irq_disable();
+
+	/*
+	 * Reset flash banking register so that we are pointing at
+	 * RedBoot bank.
+	 */
+	if (machine_is_ixdp2401()) {
+		ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
+					((0 >> IXDP2X01_FLASH_WINDOW_BITS)
+						| IXDP2X01_CPLD_FLASH_INTERN));
+		ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff);
+	}
+
+	/*
+	 * On IXDP2801 we need to write this magic sequence to the CPLD
+	 * to cause a complete reset of the CPU and all external devices
+	 * and move the flash bank register back to 0.
+	 */
+	if (machine_is_ixdp2801() || machine_is_ixdp28x5()) {
+		unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
+
+		reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
+		ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg);
+		ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000);
+	}
+
+	ixp2000_reg_wrb(IXP2000_RESET0, RSTALL);
+}
diff --git a/arch/arm/mach-ixp2000/include/mach/timex.h b/arch/arm/mach-ixp2000/include/mach/timex.h
new file mode 100644
index 0000000..835e659
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/timex.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/timex.h
+ *
+ * IXP2000 architecture timex specifications
+ */
+
+
+/*
+ * Default clock is 50MHz APB, but platform code can override this
+ */
+#define CLOCK_TICK_RATE	50000000
+
+
diff --git a/arch/arm/mach-ixp2000/include/mach/uncompress.h b/arch/arm/mach-ixp2000/include/mach/uncompress.h
new file mode 100644
index 0000000..ce36308
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/uncompress.h
+ *
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2002 Intel Corp.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/serial_reg.h>
+
+#define UART_BASE	0xc0030000
+
+#define PHYS(x)          ((volatile unsigned long *)(UART_BASE + x))
+
+#define UARTDR          PHYS(0x00)      /* Transmit reg dlab=0 */
+#define UARTDLL         PHYS(0x00)      /* Divisor Latch reg dlab=1*/
+#define UARTDLM         PHYS(0x04)      /* Divisor Latch reg dlab=1*/
+#define UARTIER         PHYS(0x04)      /* Interrupt enable reg */
+#define UARTFCR         PHYS(0x08)      /* FIFO control reg dlab =0*/
+#define UARTLCR         PHYS(0x0c)      /* Control reg */
+#define UARTSR          PHYS(0x14)      /* Status reg */
+
+
+static inline void putc(int c)
+{
+	int j = 0x1000;
+
+	while (--j && !(*UARTSR & UART_LSR_THRE))
+		barrier();
+
+	*UARTDR = c;
+}
+
+static inline void flush(void)
+{
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ixp2000/include/mach/vmalloc.h b/arch/arm/mach-ixp2000/include/mach/vmalloc.h
new file mode 100644
index 0000000..d195e35
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/vmalloc.h
+ *
+ * Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ *
+ * Copyright 2002 Intel Corp.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_END	    0xfb000000
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index 5f10687..c673b9e 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -31,7 +31,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index 4c0f0ee..6715b50 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -31,7 +31,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index f378bae..5a781fd 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -31,7 +31,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
@@ -41,7 +41,7 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/arch.h>
 
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 
 /*************************************************************************
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 739a9e0..78a2341 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -36,7 +36,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c
index dd0eee2..03d916f 100644
--- a/arch/arm/mach-ixp2000/pci.c
+++ b/arch/arm/mach-ixp2000/pci.c
@@ -28,7 +28,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/pci.h>
 
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index bc40cd4..68b4ac5 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -32,7 +32,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
index b6cbefc..1c06bfc5 100644
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -29,7 +29,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
new file mode 100644
index 0000000..905db31
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <mach/ixp23xx.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1				@ mmu enabled?
+		ldreq	\rx, =IXP23XX_PERIPHERAL_PHYS 	@ physical
+		ldrne	\rx, =IXP23XX_PERIPHERAL_VIRT	@ virtual
+#ifdef __ARMEB__
+		orr	\rx, \rx, #0x00000003
+#endif
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ixp23xx/include/mach/dma.h b/arch/arm/mach-ixp23xx/include/mach/dma.h
new file mode 100644
index 0000000..8886544b
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/dma.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/dma.h
+ */
diff --git a/arch/arm/mach-ixp23xx/include/mach/entry-macro.S b/arch/arm/mach-ixp23xx/include/mach/entry-macro.S
new file mode 100644
index 0000000..3f5338a
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/entry-macro.S
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/entry-macro.S
+ */
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET)
+		ldr	\irqnr, [\irqnr]	@ get interrupt number
+		cmp	\irqnr, #0x0		@ spurious interrupt ?
+		movne	\irqnr, \irqnr, lsr #2	@ skip unwanted low order bits
+		subne	\irqnr, \irqnr, #1	@ convert to 0 based
+
+#if 0
+		cmp	\irqnr, #IRQ_IXP23XX_PCI_INT_RPH
+		bne	1001f
+		mov	\irqnr, #IRQ_IXP23XX_INTA
+
+		ldr	\irqnr, =0xf5000030
+
+		mov	\tmp, #(1<<26)
+		tst	\irqnr, \tmp
+		movne	\irqnr, #IRQ_IXP23XX_INTB
+
+		mov	\tmp, #(1<<27)
+		tst	\irqnr, \tmp
+		movne	\irqnr, #IRQ_IXP23XX_INTA
+1001:
+#endif
+		.endm
diff --git a/arch/arm/mach-ixp23xx/include/mach/hardware.h b/arch/arm/mach-ixp23xx/include/mach/hardware.h
new file mode 100644
index 0000000..c319200
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/hardware.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/hardware.h
+ *
+ * Copyright (C) 2002-2004 Intel Corporation.
+ * Copyricht (C) 2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Hardware definitions for IXP23XX based systems
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* PCI IO info */
+#define PCIO_BASE		IXP23XX_PCI_IO_VIRT
+#define PCIBIOS_MIN_IO		0x00000000
+#define PCIBIOS_MIN_MEM		0xe0000000
+
+#include "ixp23xx.h"
+
+#define pcibios_assign_all_busses()	0
+
+/*
+ * Platform helper functions
+ */
+#include "platform.h"
+
+/*
+ * Platform-specific headers
+ */
+#include "ixdp2351.h"
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/io.h b/arch/arm/mach-ixp23xx/include/mach/io.h
new file mode 100644
index 0000000..305ea18
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/io.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/io.h
+ *
+ * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2003-2005 Intel Corp.
+ * Copyright (C) 2005 MontaVista Software, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(p)		((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT))
+#define __mem_pci(a)	(a)
+
+#include <linux/kernel.h>	/* For BUG */
+
+static inline void __iomem *
+ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned int mtype)
+{
+	if (addr >= IXP23XX_PCI_MEM_START &&
+		addr <= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) {
+		if (addr + size > IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE)
+			return NULL;
+
+		return (void __iomem *)
+ 			((addr - IXP23XX_PCI_MEM_START) + IXP23XX_PCI_MEM_VIRT);
+	}
+
+	return __arm_ioremap(addr, size, mtype);
+}
+
+static inline void
+ixp23xx_iounmap(void __iomem *addr)
+{
+	if ((((u32)addr) >= IXP23XX_PCI_MEM_VIRT) &&
+	    (((u32)addr) < IXP23XX_PCI_MEM_VIRT + IXP23XX_PCI_MEM_SIZE))
+		return;
+
+	__iounmap(addr);
+}
+
+#define __arch_ioremap(a,s,f)	ixp23xx_ioremap(a,s,f)
+#define __arch_iounmap(a)	ixp23xx_iounmap(a)
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/irqs.h b/arch/arm/mach-ixp23xx/include/mach/irqs.h
new file mode 100644
index 0000000..3af33a0
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/irqs.h
@@ -0,0 +1,223 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/irqs.h
+ *
+ * IRQ definitions for IXP23XX based systems
+ *
+ * Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ *
+ * Copyright (C) 2003-2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define NR_IXP23XX_IRQS			IRQ_IXP23XX_INTB+1
+#define IRQ_IXP23XX_EXTIRQS		NR_IXP23XX_IRQS
+
+
+#define IRQ_IXP23XX_DBG0		0	/* Debug/Execution/MBox */
+#define IRQ_IXP23XX_DBG1		1	/* Debug/Execution/MBox */
+#define IRQ_IXP23XX_NPE_TRG		2	/* npe_trigger */
+#define IRQ_IXP23XX_TIMER1		3	/* Timer[0] */
+#define IRQ_IXP23XX_TIMER2		4	/* Timer[1] */
+#define IRQ_IXP23XX_TIMESTAMP		5	/* Timer[2], Time-stamp */
+#define IRQ_IXP23XX_WDOG		6	/* Time[3], Watchdog Timer */
+#define IRQ_IXP23XX_PCI_DBELL		7	/* PCI Doorbell */
+#define IRQ_IXP23XX_PCI_DMA1		8	/* PCI DMA Channel 1 */
+#define IRQ_IXP23XX_PCI_DMA2		9	/* PCI DMA Channel 2 */
+#define IRQ_IXP23XX_PCI_DMA3		10	/* PCI DMA Channel 3 */
+#define IRQ_IXP23XX_PCI_INT_RPH		11	/* pcxg_pci_int_rph */
+#define IRQ_IXP23XX_CPP_PMU		12	/* xpxg_pm_int_rpl */
+#define IRQ_IXP23XX_SWINT0		13	/* S/W Interrupt0 */
+#define IRQ_IXP23XX_SWINT1		14	/* S/W Interrupt1 */
+#define IRQ_IXP23XX_UART2		15	/* UART1 Interrupt */
+#define IRQ_IXP23XX_UART1		16	/* UART0 Interrupt */
+#define IRQ_IXP23XX_XSI_PMU_ROLLOVER	17	/* AHB Performance M. Unit counter rollover */
+#define IRQ_IXP23XX_XSI_AHB_PM0		18	/* intr_pm_o */
+#define IRQ_IXP23XX_XSI_AHB_ECE0	19	/* intr_ece_o */
+#define IRQ_IXP23XX_XSI_AHB_GASKET	20	/* gas_intr_o */
+#define IRQ_IXP23XX_XSI_CPP		21	/* xsi2cpp_int */
+#define IRQ_IXP23XX_CPP_XSI		22	/* cpp2xsi_int */
+#define IRQ_IXP23XX_ME_ATTN0		23	/* ME_ATTN */
+#define IRQ_IXP23XX_ME_ATTN1		24	/* ME_ATTN */
+#define IRQ_IXP23XX_ME_ATTN2		25	/* ME_ATTN */
+#define IRQ_IXP23XX_ME_ATTN3		26	/* ME_ATTN */
+#define IRQ_IXP23XX_PCI_ERR_RPH		27	/* PCXG_PCI_ERR_RPH */
+#define IRQ_IXP23XX_D0XG_ECC_CORR	28	/* D0XG_DRAM_ECC_CORR */
+#define IRQ_IXP23XX_D0XG_ECC_UNCORR	29	/* D0XG_DRAM_ECC_UNCORR */
+#define IRQ_IXP23XX_SRAM_ERR1		30	/* SRAM1_ERR */
+#define IRQ_IXP23XX_SRAM_ERR0		31	/* SRAM0_ERR */
+#define IRQ_IXP23XX_MEDIA_ERR		32	/* MEDIA_ERR */
+#define IRQ_IXP23XX_STH_DRAM_ECC_MAJ	33	/* STH_DRAM0_ECC_MAJ */
+#define IRQ_IXP23XX_GPIO6		34	/* GPIO0 interrupts */
+#define IRQ_IXP23XX_GPIO7		35	/* GPIO1 interrupts */
+#define IRQ_IXP23XX_GPIO8		36	/* GPIO2 interrupts */
+#define IRQ_IXP23XX_GPIO9		37	/* GPIO3 interrupts */
+#define IRQ_IXP23XX_GPIO10		38	/* GPIO4 interrupts */
+#define IRQ_IXP23XX_GPIO11		39	/* GPIO5 interrupts */
+#define IRQ_IXP23XX_GPIO12		40	/* GPIO6 interrupts */
+#define IRQ_IXP23XX_GPIO13		41	/* GPIO7 interrupts */
+#define IRQ_IXP23XX_GPIO14		42	/* GPIO8 interrupts */
+#define IRQ_IXP23XX_GPIO15		43	/* GPIO9 interrupts */
+#define IRQ_IXP23XX_SHAC_RING0		44	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING1		45	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING2		46	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING3		47	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING4		48	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING5		49	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING6		50	/* SHAC RING Full */
+#define IRQ_IXP23XX_SHAC_RING7		51	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING8		52	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING9		53	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING10		54	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING11		55	/* SHAC Ring Full */
+#define IRQ_IXP23XX_ME_THREAD_A0_ME0	56	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A1_ME0	57	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A2_ME0	58	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A3_ME0	59	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A4_ME0	60	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A5_ME0	61	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A6_ME0	62	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A7_ME0	63	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A8_ME1	64	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A9_ME1	65	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A10_ME1	66	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A11_ME1	67	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A12_ME1	68	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A13_ME1	69	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A14_ME1	70	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A15_ME1	71	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A16_ME2	72	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A17_ME2	73	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A18_ME2	74	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A19_ME2	75	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A20_ME2	76	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A21_ME2	77	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A22_ME2	78	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A23_ME2	79	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A24_ME3	80	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A25_ME3	81	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A26_ME3	82	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A27_ME3	83	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A28_ME3	84	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A29_ME3	85	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A30_ME3	86	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A31_ME3	87	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_B0_ME0	88	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B1_ME0	89	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B2_ME0	90	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B3_ME0	91	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B4_ME0	92	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B5_ME0	93	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B6_ME0	94	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B7_ME0	95	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B8_ME1	96	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B9_ME1	97	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B10_ME1	98	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B11_ME1	99	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B12_ME1	100	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B13_ME1	101	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B14_ME1	102	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B15_ME1	103	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B16_ME2	104	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B17_ME2	105	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B18_ME2	106	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B19_ME2	107	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B20_ME2	108	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B21_ME2	109	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B22_ME2	110	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B23_ME2	111	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B24_ME3	112	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B25_ME3	113	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B26_ME3	114	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B27_ME3	115	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B28_ME3	116	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B29_ME3	117	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B30_ME3	118	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B31_ME3	119	/* ME_THREAD_B */
+
+#define NUM_IXP23XX_RAW_IRQS		120
+
+#define IRQ_IXP23XX_INTA		120	/* Indirect pcxg_pci_int_rph */
+#define IRQ_IXP23XX_INTB		121	/* Indirect pcxg_pci_int_rph */
+
+#define NR_IXP23XX_IRQ			(IRQ_IXP23XX_INTB + 1)
+
+/*
+ * We default to 32 per-board IRQs. Increase this number if you need
+ * more, but keep it realistic.
+ */
+#define NR_IXP23XX_MACH_IRQS 		32
+
+#define NR_IRQS				(NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS)
+
+#define IXP23XX_MACH_IRQ(irq) 		(NR_IXP23XX_IRQ + (irq))
+
+
+/*
+ * IXDP2351-specific interrupts
+ */
+
+/*
+ * External PCI interrupts signaled through INTB
+ *
+ */
+#define IXDP2351_INTB_IRQ_BASE 		0
+#define IRQ_IXDP2351_INTA_82546		IXP23XX_MACH_IRQ(0)
+#define IRQ_IXDP2351_INTB_82546		IXP23XX_MACH_IRQ(1)
+#define IRQ_IXDP2351_SPCI_DB_0		IXP23XX_MACH_IRQ(2)
+#define IRQ_IXDP2351_SPCI_DB_1		IXP23XX_MACH_IRQ(3)
+#define IRQ_IXDP2351_SPCI_PMC_INTA	IXP23XX_MACH_IRQ(4)
+#define IRQ_IXDP2351_SPCI_PMC_INTB	IXP23XX_MACH_IRQ(5)
+#define IRQ_IXDP2351_SPCI_PMC_INTC	IXP23XX_MACH_IRQ(6)
+#define IRQ_IXDP2351_SPCI_PMC_INTD	IXP23XX_MACH_IRQ(7)
+#define IRQ_IXDP2351_SPCI_FIC		IXP23XX_MACH_IRQ(8)
+
+#define IXDP2351_INTB_IRQ_BIT(irq)	(irq - IXP23XX_MACH_IRQ(0))
+#define IXDP2351_INTB_IRQ_MASK(irq)	(1 << IXDP2351_INTB_IRQ_BIT(irq))
+#define IXDP2351_INTB_IRQ_VALID		0x01FF
+#define IXDP2351_INTB_IRQ_NUM 		16
+
+/*
+ * Other external interrupts signaled through INTA
+ */
+#define IXDP2351_INTA_IRQ_BASE 		16
+#define IRQ_IXDP2351_IPMI_FROM		IXP23XX_MACH_IRQ(16)
+#define IRQ_IXDP2351_125US		IXP23XX_MACH_IRQ(17)
+#define IRQ_IXDP2351_DB_0_ADD		IXP23XX_MACH_IRQ(18)
+#define IRQ_IXDP2351_DB_1_ADD		IXP23XX_MACH_IRQ(19)
+#define IRQ_IXDP2351_DEBUG1		IXP23XX_MACH_IRQ(20)
+#define IRQ_IXDP2351_ADD_UART		IXP23XX_MACH_IRQ(21)
+#define IRQ_IXDP2351_FIC_ADD		IXP23XX_MACH_IRQ(24)
+#define IRQ_IXDP2351_CS8900		IXP23XX_MACH_IRQ(25)
+#define IRQ_IXDP2351_BBSRAM		IXP23XX_MACH_IRQ(26)
+#define IRQ_IXDP2351_CONFIG_MEDIA	IXP23XX_MACH_IRQ(27)
+#define IRQ_IXDP2351_CLOCK_REF		IXP23XX_MACH_IRQ(28)
+#define IRQ_IXDP2351_A10_NP		IXP23XX_MACH_IRQ(29)
+#define IRQ_IXDP2351_A11_NP		IXP23XX_MACH_IRQ(30)
+#define IRQ_IXDP2351_DEBUG_NP		IXP23XX_MACH_IRQ(31)
+
+#define IXDP2351_INTA_IRQ_BIT(irq) 	(irq - IXP23XX_MACH_IRQ(16))
+#define IXDP2351_INTA_IRQ_MASK(irq) 	(1 << IXDP2351_INTA_IRQ_BIT(irq))
+#define IXDP2351_INTA_IRQ_VALID 	0xFF3F
+#define IXDP2351_INTA_IRQ_NUM 		16
+
+
+/*
+ * ADI RoadRunner IRQs
+ */
+#define IRQ_ROADRUNNER_PCI_INTA 	IRQ_IXP23XX_INTA
+#define IRQ_ROADRUNNER_PCI_INTB 	IRQ_IXP23XX_INTB
+#define IRQ_ROADRUNNER_PCI_INTC 	IRQ_IXP23XX_GPIO11
+#define IRQ_ROADRUNNER_PCI_INTD 	IRQ_IXP23XX_GPIO12
+
+/*
+ * Put new board definitions here
+ */
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h b/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
new file mode 100644
index 0000000..6639510
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
+ *
+ * Register and other defines for IXDP2351
+ *
+ * Copyright (c) 2002-2004 Intel Corp.
+ * Copytight (c) 2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_ARCH_IXDP2351_H
+#define __ASM_ARCH_IXDP2351_H
+
+/*
+ * NP module memory map
+ */
+#define IXDP2351_NP_PHYS_BASE		(IXP23XX_EXP_BUS_CS4_BASE)
+#define IXDP2351_NP_PHYS_SIZE		0x00100000
+#define IXDP2351_NP_VIRT_BASE		0xeff00000
+
+#define IXDP2351_VIRT_CS8900_BASE	(IXDP2351_NP_VIRT_BASE)
+#define IXDP2351_VIRT_CS8900_END	(IXDP2351_VIRT_CS8900_BASE + 16)
+
+#define IXDP2351_VIRT_NP_CPLD_BASE 	(IXP23XX_EXP_BUS_CS4_BASE_VIRT + 0x00010000)
+
+#define IXDP2351_NP_CPLD_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_NP_CPLD_BASE + reg))
+
+#define IXDP2351_NP_CPLD_RESET1_REG	IXDP2351_NP_CPLD_REG(0x00)
+#define IXDP2351_NP_CPLD_LED_REG	IXDP2351_NP_CPLD_REG(0x02)
+#define IXDP2351_NP_CPLD_VERSION_REG	IXDP2351_NP_CPLD_REG(0x04)
+
+/*
+ * Base board module memory map
+ */
+
+#define IXDP2351_BB_BASE_PHYS		(IXP23XX_EXP_BUS_CS5_BASE)
+#define IXDP2351_BB_SIZE		0x01000000
+#define IXDP2351_BB_BASE_VIRT		(0xee000000)
+
+#define IXDP2351_BB_AREA_BASE(offset)	(IXDP2351_BB_BASE_VIRT + offset)
+
+#define IXDP2351_VIRT_NVRAM_BASE	IXDP2351_BB_AREA_BASE(0x0)
+#define IXDP2351_NVRAM_SIZE		(0x20000)
+
+#define IXDP2351_VIRT_MB_IXF1104_BASE	IXDP2351_BB_AREA_BASE(0x00020000)
+#define IXDP2351_VIRT_ADD_UART_BASE	IXDP2351_BB_AREA_BASE(0x000240C0)
+#define IXDP2351_VIRT_FIC_BASE		IXDP2351_BB_AREA_BASE(0x00200000)
+#define IXDP2351_VIRT_DB0_BASE		IXDP2351_BB_AREA_BASE(0x00400000)
+#define IXDP2351_VIRT_DB1_BASE		IXDP2351_BB_AREA_BASE(0x00600000)
+#define IXDP2351_VIRT_CPLD_BASE		IXDP2351_BB_AREA_BASE(0x00024000)
+
+/*
+ * On board CPLD registers
+ */
+#define IXDP2351_CPLD_BB_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_CPLD_BASE + reg))
+
+#define IXDP2351_CPLD_RESET0_REG	IXDP2351_CPLD_BB_REG(0x00)
+#define IXDP2351_CPLD_RESET1_REG	IXDP2351_CPLD_BB_REG(0x04)
+
+#define IXDP2351_CPLD_RESET1_MAGIC 	0x55AA
+#define IXDP2351_CPLD_RESET1_ENABLE 	0x8000
+
+#define IXDP2351_CPLD_FPGA_CONFIG_REG	IXDP2351_CPLD_BB_REG(0x08)
+#define IXDP2351_CPLD_INTB_MASK_SET_REG	IXDP2351_CPLD_BB_REG(0x10)
+#define IXDP2351_CPLD_INTA_MASK_SET_REG	IXDP2351_CPLD_BB_REG(0x14)
+#define IXDP2351_CPLD_INTB_STAT_REG	IXDP2351_CPLD_BB_REG(0x18)
+#define IXDP2351_CPLD_INTA_STAT_REG	IXDP2351_CPLD_BB_REG(0x1C)
+#define IXDP2351_CPLD_INTB_RAW_REG	IXDP2351_CPLD_BB_REG(0x20)	/* read */
+#define IXDP2351_CPLD_INTA_RAW_REG	IXDP2351_CPLD_BB_REG(0x24)	/* read */
+#define IXDP2351_CPLD_INTB_MASK_CLR_REG	IXDP2351_CPLD_INTB_RAW_REG	/* write */
+#define IXDP2351_CPLD_INTA_MASK_CLR_REG	IXDP2351_CPLD_INTA_RAW_REG	/* write */
+#define IXDP2351_CPLD_INTB_SIM_REG	IXDP2351_CPLD_BB_REG(0x28)
+#define IXDP2351_CPLD_INTA_SIM_REG	IXDP2351_CPLD_BB_REG(0x2C)
+	/* Interrupt bits are defined in irqs.h */
+#define IXDP2351_CPLD_BB_GBE0_REG	IXDP2351_CPLD_BB_REG(0x30)
+#define IXDP2351_CPLD_BB_GBE1_REG	IXDP2351_CPLD_BB_REG(0x34)
+
+/* #define IXDP2351_CPLD_BB_MISC_REG	IXDP2351_CPLD_REG(0x1C) */
+/* #define IXDP2351_CPLD_BB_MISC_REV_MASK	0xFF		*/
+/* #define IXDP2351_CPLD_BB_GDXCS0_REG	IXDP2351_CPLD_REG(0x24) */
+/* #define IXDP2351_CPLD_BB_GDXCS1_REG	IXDP2351_CPLD_REG(0x28) */
+/* #define IXDP2351_CPLD_BB_CLOCK_REG	IXDP2351_CPLD_REG(0x04) */
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h b/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
new file mode 100644
index 0000000..6d02481
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
@@ -0,0 +1,298 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
+ *
+ * Register definitions for IXP23XX
+ *
+ * Copyright (C) 2003-2005 Intel Corporation.
+ * Copyright (C) 2005 MontaVista Software, Inc.
+ *
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IXP23XX_H
+#define __ASM_ARCH_IXP23XX_H
+
+/*
+ * IXP2300 linux memory map:
+ *
+ * virt		phys		size
+ * fffd0000	a0000000	64K		XSI2CPP_CSR
+ * fffc0000	c4000000	4K		EXP_CFG
+ * fff00000	c8000000	64K		PERIPHERAL
+ * fe000000	1c0000000	16M		CAP_CSR
+ * fd000000	1c8000000	16M		MSF_CSR
+ * fb000000			16M		---
+ * fa000000	1d8000000	32M		PCI_IO
+ * f8000000	1da000000	32M		PCI_CFG
+ * f6000000	1de000000	32M		PCI_CREG
+ * f4000000			32M		---
+ * f0000000	1e0000000	64M		PCI_MEM
+ * e[c-f]000000					per-platform mappings
+ */
+
+
+/****************************************************************************
+ * Static mappings.
+ ****************************************************************************/
+#define IXP23XX_XSI2CPP_CSR_PHYS	0xa0000000
+#define IXP23XX_XSI2CPP_CSR_VIRT	0xfffd0000
+#define IXP23XX_XSI2CPP_CSR_SIZE	0x00010000
+
+#define IXP23XX_EXP_CFG_PHYS		0xc4000000
+#define IXP23XX_EXP_CFG_VIRT		0xfffc0000
+#define IXP23XX_EXP_CFG_SIZE		0x00001000
+
+#define IXP23XX_PERIPHERAL_PHYS		0xc8000000
+#define IXP23XX_PERIPHERAL_VIRT		0xfff00000
+#define IXP23XX_PERIPHERAL_SIZE		0x00010000
+
+#define IXP23XX_CAP_CSR_PHYS		0x1c0000000ULL
+#define IXP23XX_CAP_CSR_VIRT		0xfe000000
+#define IXP23XX_CAP_CSR_SIZE		0x01000000
+
+#define IXP23XX_MSF_CSR_PHYS		0x1c8000000ULL
+#define IXP23XX_MSF_CSR_VIRT		0xfd000000
+#define IXP23XX_MSF_CSR_SIZE		0x01000000
+
+#define IXP23XX_PCI_IO_PHYS		0x1d8000000ULL
+#define IXP23XX_PCI_IO_VIRT		0xfa000000
+#define IXP23XX_PCI_IO_SIZE		0x02000000
+
+#define IXP23XX_PCI_CFG_PHYS		0x1da000000ULL
+#define IXP23XX_PCI_CFG_VIRT		0xf8000000
+#define IXP23XX_PCI_CFG_SIZE		0x02000000
+#define IXP23XX_PCI_CFG0_VIRT		IXP23XX_PCI_CFG_VIRT
+#define IXP23XX_PCI_CFG1_VIRT		(IXP23XX_PCI_CFG_VIRT + 0x01000000)
+
+#define IXP23XX_PCI_CREG_PHYS		0x1de000000ULL
+#define IXP23XX_PCI_CREG_VIRT		0xf6000000
+#define IXP23XX_PCI_CREG_SIZE		0x02000000
+#define IXP23XX_PCI_CSR_VIRT		(IXP23XX_PCI_CREG_VIRT + 0x01000000)
+
+#define IXP23XX_PCI_MEM_START		0xe0000000
+#define IXP23XX_PCI_MEM_PHYS		0x1e0000000ULL
+#define IXP23XX_PCI_MEM_VIRT		0xf0000000
+#define IXP23XX_PCI_MEM_SIZE		0x04000000
+
+
+/****************************************************************************
+ * XSI2CPP CSRs.
+ ****************************************************************************/
+#define IXP23XX_XSI2CPP_REG(x)		((volatile unsigned long *)(IXP23XX_XSI2CPP_CSR_VIRT + (x)))
+#define IXP23XX_CPP2XSI_CURR_XFER_REG3	IXP23XX_XSI2CPP_REG(0xf8)
+#define IXP23XX_CPP2XSI_ADDR_31		(1 << 19)
+#define IXP23XX_CPP2XSI_PSH_OFF		(1 << 20)
+#define IXP23XX_CPP2XSI_COH_OFF		(1 << 21)
+
+
+/****************************************************************************
+ * Expansion Bus Config.
+ ****************************************************************************/
+#define IXP23XX_EXP_CFG_REG(x)		((volatile unsigned long *)(IXP23XX_EXP_CFG_VIRT + (x)))
+#define IXP23XX_EXP_CS0			IXP23XX_EXP_CFG_REG(0x00)
+#define IXP23XX_EXP_CS1			IXP23XX_EXP_CFG_REG(0x04)
+#define IXP23XX_EXP_CS2			IXP23XX_EXP_CFG_REG(0x08)
+#define IXP23XX_EXP_CS3			IXP23XX_EXP_CFG_REG(0x0c)
+#define IXP23XX_EXP_CS4			IXP23XX_EXP_CFG_REG(0x10)
+#define IXP23XX_EXP_CS5			IXP23XX_EXP_CFG_REG(0x14)
+#define IXP23XX_EXP_CS6			IXP23XX_EXP_CFG_REG(0x18)
+#define IXP23XX_EXP_CS7			IXP23XX_EXP_CFG_REG(0x1c)
+#define IXP23XX_FLASH_WRITABLE		(0x2)
+#define IXP23XX_FLASH_BUS8		(0x1)
+
+#define IXP23XX_EXP_CFG0		IXP23XX_EXP_CFG_REG(0x20)
+#define IXP23XX_EXP_CFG1		IXP23XX_EXP_CFG_REG(0x24)
+#define IXP23XX_EXP_CFG0_MEM_MAP		(1 << 31)
+#define IXP23XX_EXP_CFG0_XSCALE_SPEED_SEL 	(3 << 22)
+#define IXP23XX_EXP_CFG0_XSCALE_SPEED_EN	(1 << 21)
+#define IXP23XX_EXP_CFG0_CPP_SPEED_SEL		(3 << 19)
+#define IXP23XX_EXP_CFG0_CPP_SPEED_EN		(1 << 18)
+#define IXP23XX_EXP_CFG0_PCI_SWIN		(3 << 16)
+#define IXP23XX_EXP_CFG0_PCI_DWIN		(3 << 14)
+#define IXP23XX_EXP_CFG0_PCI33_MODE		(1 << 13)
+#define IXP23XX_EXP_CFG0_QDR_SPEED_SEL		(1 << 12)
+#define IXP23XX_EXP_CFG0_CPP_DIV_SEL		(1 << 5)
+#define IXP23XX_EXP_CFG0_XSI_NOT_PRES		(1 << 4)
+#define IXP23XX_EXP_CFG0_PROM_BOOT		(1 << 3)
+#define IXP23XX_EXP_CFG0_PCI_ARB		(1 << 2)
+#define IXP23XX_EXP_CFG0_PCI_HOST		(1 << 1)
+#define IXP23XX_EXP_CFG0_FLASH_WIDTH		(1 << 0)
+
+#define IXP23XX_EXP_UNIT_FUSE		IXP23XX_EXP_CFG_REG(0x28)
+#define IXP23XX_EXP_MSF_MUX		IXP23XX_EXP_CFG_REG(0x30)
+#define IXP23XX_EXP_CFG_FUSE		IXP23XX_EXP_CFG_REG(0x34)
+
+#define IXP23XX_EXP_BUS_PHYS		0x90000000
+#define IXP23XX_EXP_BUS_WINDOW_SIZE	0x01000000
+
+#define IXP23XX_EXP_BUS_CS0_BASE	(IXP23XX_EXP_BUS_PHYS + 0x00000000)
+#define IXP23XX_EXP_BUS_CS1_BASE	(IXP23XX_EXP_BUS_PHYS + 0x01000000)
+#define IXP23XX_EXP_BUS_CS2_BASE	(IXP23XX_EXP_BUS_PHYS + 0x02000000)
+#define IXP23XX_EXP_BUS_CS3_BASE	(IXP23XX_EXP_BUS_PHYS + 0x03000000)
+#define IXP23XX_EXP_BUS_CS4_BASE	(IXP23XX_EXP_BUS_PHYS + 0x04000000)
+#define IXP23XX_EXP_BUS_CS5_BASE	(IXP23XX_EXP_BUS_PHYS + 0x05000000)
+#define IXP23XX_EXP_BUS_CS6_BASE	(IXP23XX_EXP_BUS_PHYS + 0x06000000)
+#define IXP23XX_EXP_BUS_CS7_BASE	(IXP23XX_EXP_BUS_PHYS + 0x07000000)
+
+
+/****************************************************************************
+ * Peripherals.
+ ****************************************************************************/
+#define IXP23XX_UART1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x0000)
+#define IXP23XX_UART2_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x1000)
+#define IXP23XX_PMU_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x2000)
+#define IXP23XX_INTC_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x3000)
+#define IXP23XX_GPIO_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x4000)
+#define IXP23XX_TIMER_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x5000)
+#define IXP23XX_NPE0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x6000)
+#define IXP23XX_DSR_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x7000)
+#define IXP23XX_NPE1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x8000)
+#define IXP23XX_ETH0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x9000)
+#define IXP23XX_ETH1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xA000)
+#define IXP23XX_GIG0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xB000)
+#define IXP23XX_GIG1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xC000)
+#define IXP23XX_DDRS_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xD000)
+
+#define IXP23XX_UART1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x0000)
+#define IXP23XX_UART2_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x1000)
+#define IXP23XX_PMU_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x2000)
+#define IXP23XX_INTC_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x3000)
+#define IXP23XX_GPIO_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x4000)
+#define IXP23XX_TIMER_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x5000)
+#define IXP23XX_NPE0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x6000)
+#define IXP23XX_DSR_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x7000)
+#define IXP23XX_NPE1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x8000)
+#define IXP23XX_ETH0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x9000)
+#define IXP23XX_ETH1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xA000)
+#define IXP23XX_GIG0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xB000)
+#define IXP23XX_GIG1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xC000)
+#define IXP23XX_DDRS_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xD000)
+
+
+/****************************************************************************
+ * Interrupt controller.
+ ****************************************************************************/
+#define IXP23XX_INTC_REG(x)		 ((volatile unsigned long *)(IXP23XX_INTC_VIRT + (x)))
+#define IXP23XX_INTR_ST1		IXP23XX_INTC_REG(0x00)
+#define IXP23XX_INTR_ST2		IXP23XX_INTC_REG(0x04)
+#define IXP23XX_INTR_ST3		IXP23XX_INTC_REG(0x08)
+#define IXP23XX_INTR_ST4		IXP23XX_INTC_REG(0x0c)
+#define IXP23XX_INTR_EN1		IXP23XX_INTC_REG(0x10)
+#define IXP23XX_INTR_EN2		IXP23XX_INTC_REG(0x14)
+#define IXP23XX_INTR_EN3		IXP23XX_INTC_REG(0x18)
+#define IXP23XX_INTR_EN4		IXP23XX_INTC_REG(0x1c)
+#define IXP23XX_INTR_SEL1		IXP23XX_INTC_REG(0x20)
+#define IXP23XX_INTR_SEL2		IXP23XX_INTC_REG(0x24)
+#define IXP23XX_INTR_SEL3		IXP23XX_INTC_REG(0x28)
+#define IXP23XX_INTR_SEL4		IXP23XX_INTC_REG(0x2c)
+#define IXP23XX_INTR_IRQ_ST1		IXP23XX_INTC_REG(0x30)
+#define IXP23XX_INTR_IRQ_ST2		IXP23XX_INTC_REG(0x34)
+#define IXP23XX_INTR_IRQ_ST3		IXP23XX_INTC_REG(0x38)
+#define IXP23XX_INTR_IRQ_ST4		IXP23XX_INTC_REG(0x3c)
+#define IXP23XX_INTR_IRQ_ENC_ST_OFFSET	0x54
+
+
+/****************************************************************************
+ * GPIO.
+ ****************************************************************************/
+#define IXP23XX_GPIO_REG(x)		((volatile unsigned long *)(IXP23XX_GPIO_VIRT + (x)))
+#define IXP23XX_GPIO_GPOUTR		IXP23XX_GPIO_REG(0x00)
+#define IXP23XX_GPIO_GPOER		IXP23XX_GPIO_REG(0x04)
+#define IXP23XX_GPIO_GPINR		IXP23XX_GPIO_REG(0x08)
+#define IXP23XX_GPIO_GPISR		IXP23XX_GPIO_REG(0x0c)
+#define IXP23XX_GPIO_GPIT1R		IXP23XX_GPIO_REG(0x10)
+#define IXP23XX_GPIO_GPIT2R		IXP23XX_GPIO_REG(0x14)
+#define IXP23XX_GPIO_GPCLKR		IXP23XX_GPIO_REG(0x18)
+#define IXP23XX_GPIO_GPDBSELR 		IXP23XX_GPIO_REG(0x1c)
+
+#define IXP23XX_GPIO_STYLE_MASK		0x7
+#define IXP23XX_GPIO_STYLE_ACTIVE_HIGH	0x0
+#define IXP23XX_GPIO_STYLE_ACTIVE_LOW	0x1
+#define IXP23XX_GPIO_STYLE_RISING_EDGE	0x2
+#define IXP23XX_GPIO_STYLE_FALLING_EDGE	0x3
+#define IXP23XX_GPIO_STYLE_TRANSITIONAL	0x4
+
+#define IXP23XX_GPIO_STYLE_SIZE		3
+
+
+/****************************************************************************
+ * Timer.
+ ****************************************************************************/
+#define IXP23XX_TIMER_REG(x)		((volatile unsigned long *)(IXP23XX_TIMER_VIRT + (x)))
+#define IXP23XX_TIMER_CONT		IXP23XX_TIMER_REG(0x00)
+#define IXP23XX_TIMER1_TIMESTAMP	IXP23XX_TIMER_REG(0x04)
+#define IXP23XX_TIMER1_RELOAD		IXP23XX_TIMER_REG(0x08)
+#define IXP23XX_TIMER2_TIMESTAMP	IXP23XX_TIMER_REG(0x0c)
+#define IXP23XX_TIMER2_RELOAD		IXP23XX_TIMER_REG(0x10)
+#define IXP23XX_TIMER_WDOG		IXP23XX_TIMER_REG(0x14)
+#define IXP23XX_TIMER_WDOG_EN		IXP23XX_TIMER_REG(0x18)
+#define IXP23XX_TIMER_WDOG_KEY		IXP23XX_TIMER_REG(0x1c)
+#define IXP23XX_TIMER_WDOG_KEY_MAGIC	0x482e
+#define IXP23XX_TIMER_STATUS		IXP23XX_TIMER_REG(0x20)
+#define IXP23XX_TIMER_SOFT_RESET	IXP23XX_TIMER_REG(0x24)
+#define IXP23XX_TIMER_SOFT_RESET_EN	IXP23XX_TIMER_REG(0x28)
+
+#define IXP23XX_TIMER_ENABLE		(1 << 0)
+#define IXP23XX_TIMER_ONE_SHOT		(1 << 1)
+/* Low order bits of reload value ignored */
+#define IXP23XX_TIMER_RELOAD_MASK	(0x3)
+#define IXP23XX_TIMER_DISABLED		(0x0)
+#define IXP23XX_TIMER1_INT_PEND		(1 << 0)
+#define IXP23XX_TIMER2_INT_PEND		(1 << 1)
+#define IXP23XX_TIMER_STATUS_TS_PEND	(1 << 2)
+#define IXP23XX_TIMER_STATUS_WDOG_PEND	(1 << 3)
+#define IXP23XX_TIMER_STATUS_WARM_RESET	(1 << 4)
+
+
+/****************************************************************************
+ * CAP CSRs.
+ ****************************************************************************/
+#define IXP23XX_GLOBAL_REG(x)		((volatile unsigned long *)(IXP23XX_CAP_CSR_VIRT + 0x4a00 + (x)))
+#define IXP23XX_PRODUCT_ID		IXP23XX_GLOBAL_REG(0x00)
+#define IXP23XX_MISC_CONTROL		IXP23XX_GLOBAL_REG(0x04)
+#define IXP23XX_MSF_CLK_CNTRL		IXP23XX_GLOBAL_REG(0x08)
+#define IXP23XX_RESET0			IXP23XX_GLOBAL_REG(0x0c)
+#define IXP23XX_RESET1			IXP23XX_GLOBAL_REG(0x10)
+#define IXP23XX_STRAP_OPTIONS		IXP23XX_GLOBAL_REG(0x18)
+
+#define IXP23XX_ENABLE_WATCHDOG		(1 << 24)
+#define IXP23XX_SHPC_INIT_COMP		(1 << 21)
+#define IXP23XX_RST_ALL			(1 << 16)
+#define IXP23XX_RESET_PCI		(1 << 2)
+#define IXP23XX_PCI_UNIT_RESET		(1 << 1)
+#define IXP23XX_XSCALE_RESET		(1 << 0)
+
+#define IXP23XX_UENGINE_CSR_VIRT_BASE	(IXP23XX_CAP_CSR_VIRT + 0x18000)
+
+
+/****************************************************************************
+ * PCI CSRs.
+ ****************************************************************************/
+#define IXP23XX_PCI_CREG(x)		((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + (x)))
+#define IXP23XX_PCI_CMDSTAT		IXP23XX_PCI_CREG(0x04)
+#define IXP23XX_PCI_SRAM_BAR		IXP23XX_PCI_CREG(0x14)
+#define IXP23XX_PCI_SDRAM_BAR		IXP23XX_PCI_CREG(0x18)
+
+
+#define IXP23XX_PCI_CSR(x)		((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + 0x01000000 + (x)))
+#define IXP23XX_PCI_OUT_INT_STATUS	IXP23XX_PCI_CSR(0x0030)
+#define IXP23XX_PCI_OUT_INT_MASK	IXP23XX_PCI_CSR(0x0034)
+#define IXP23XX_PCI_SRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x00fc)
+#define IXP23XX_PCI_DRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x0100)
+#define IXP23XX_PCI_CONTROL		IXP23XX_PCI_CSR(0x013c)
+#define IXP23XX_PCI_ADDR_EXT		IXP23XX_PCI_CSR(0x0140)
+#define IXP23XX_PCI_ME_PUSH_STATUS	IXP23XX_PCI_CSR(0x0148)
+#define IXP23XX_PCI_ME_PUSH_EN		IXP23XX_PCI_CSR(0x014c)
+#define IXP23XX_PCI_ERR_STATUS		IXP23XX_PCI_CSR(0x0150)
+#define IXP23XX_PCI_ERROR_STATUS	IXP23XX_PCI_CSR(0x0150)
+#define IXP23XX_PCI_ERR_ENABLE		IXP23XX_PCI_CSR(0x0154)
+#define IXP23XX_PCI_XSCALE_INT_STATUS	IXP23XX_PCI_CSR(0x0158)
+#define IXP23XX_PCI_XSCALE_INT_ENABLE	IXP23XX_PCI_CSR(0x015c)
+#define IXP23XX_PCI_CPP_ADDR_BITS	IXP23XX_PCI_CSR(0x0160)
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/memory.h b/arch/arm/mach-ixp23xx/include/mach/memory.h
new file mode 100644
index 0000000..9d40115
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/memory.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/memory.h
+ *
+ * Copyright (c) 2003-2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET		(0x00000000)
+
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#ifndef __ASSEMBLY__
+
+#define __virt_to_bus(v)						\
+	({ unsigned int ret;						\
+	ret = ((__virt_to_phys(v) - 0x00000000) +			\
+	 (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)); 	\
+	ret; })
+
+#define __bus_to_virt(b)						\
+	({ unsigned int data;						\
+	data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR);		\
+	 __phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); })
+
+#define arch_is_coherent()	1
+
+#endif
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/platform.h b/arch/arm/mach-ixp23xx/include/mach/platform.h
new file mode 100644
index 0000000..db9d941
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/platform.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/platform.h
+ *
+ * Various bits of code used by platform-level code.
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long ixp2000_reg_read(volatile void *reg)
+{
+	return *((volatile unsigned long *)reg);
+}
+
+static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
+{
+	*((volatile unsigned long *)reg) = val;
+}
+
+static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
+{
+	*((volatile unsigned long *)reg) = val;
+}
+
+struct pci_sys_data;
+
+void ixp23xx_map_io(void);
+void ixp23xx_init_irq(void);
+void ixp23xx_sys_init(void);
+int ixp23xx_pci_setup(int, struct pci_sys_data *);
+void ixp23xx_pci_preinit(void);
+struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*);
+void ixp23xx_pci_slave_init(void);
+
+extern struct sys_timer ixp23xx_timer;
+
+#define IXP23XX_UART_XTAL		14745600
+
+#ifndef __ASSEMBLY__
+/*
+ * Is system memory on the XSI or CPP bus?
+ */
+static inline unsigned ixp23xx_cpp_boot(void)
+{
+	return (*IXP23XX_EXP_CFG0 & IXP23XX_EXP_CFG0_XSI_NOT_PRES);
+}
+#endif
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h
new file mode 100644
index 0000000..d57c3fc
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/system.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/system.h
+ *
+ * Copyright (C) 2003 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+#if 0
+	if (!hlt_counter)
+		cpu_do_idle();
+#endif
+}
+
+static inline void arch_reset(char mode)
+{
+	/* First try machine specific support */
+	if (machine_is_ixdp2351()) {
+		*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC;
+		(void) *IXDP2351_CPLD_RESET1_REG;
+		*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE;
+	}
+
+	/* Use on-chip reset capability */
+	*IXP23XX_RESET0 |= IXP23XX_RST_ALL;
+}
diff --git a/arch/arm/mach-ixp23xx/include/mach/time.h b/arch/arm/mach-ixp23xx/include/mach/time.h
new file mode 100644
index 0000000..b61dafc
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/time.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/time.h
+ */
diff --git a/arch/arm/mach-ixp23xx/include/mach/timex.h b/arch/arm/mach-ixp23xx/include/mach/timex.h
new file mode 100644
index 0000000..e341e9c
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/timex.h
@@ -0,0 +1,7 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/timex.h
+ *
+ * XScale architecture timex specifications
+ */
+
+#define CLOCK_TICK_RATE 75000000
diff --git a/arch/arm/mach-ixp23xx/include/mach/uncompress.h b/arch/arm/mach-ixp23xx/include/mach/uncompress.h
new file mode 100644
index 0000000..8b4c358
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/uncompress.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/uncompress.h
+ *
+ * Copyright (C) 2002-2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/ixp23xx.h>
+#include <linux/serial_reg.h>
+
+#define UART_BASE	((volatile u32 *)IXP23XX_UART1_PHYS)
+
+static inline void putc(char c)
+{
+	int j;
+
+	for (j = 0; j < 0x1000; j++) {
+		if (UART_BASE[UART_LSR] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	UART_BASE[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/vmalloc.h b/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
new file mode 100644
index 0000000..dd519f6
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ * NPU mappings end at 0xf0000000 and we allocate 64MB for board
+ * specific static I/O.
+ */
+
+#define VMALLOC_END	(0xec000000)
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index d510160..b6e0bfa 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -34,7 +34,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
index c84cc6b..701d60a 100644
--- a/arch/arm/mach-ixp23xx/pci.c
+++ b/arch/arm/mach-ixp23xx/pci.c
@@ -31,7 +31,7 @@
 #include <asm/sizes.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 extern int (*external_fault) (unsigned long, struct pt_regs *);
 
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index c461520..6d38d76 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -33,7 +33,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c
index 8d549da..08d65dc 100644
--- a/arch/arm/mach-ixp4xx/avila-pci.c
+++ b/arch/arm/mach-ixp4xx/avila-pci.c
@@ -25,7 +25,7 @@
 
 #include <asm/mach/pci.h>
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 void __init avila_pci_preinit(void)
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 87e38ca..797995c 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -23,7 +23,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 3b32f70..192538a 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -32,7 +32,7 @@
 #include <asm/sizes.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 
 /*
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 00cede2..58bd284 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -29,8 +29,8 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 
-#include <asm/arch/udc.h>
-#include <asm/arch/hardware.h>
+#include <mach/udc.h>
+#include <mach/hardware.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
index 6dd400f..efddf01 100644
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ b/arch/arm/mach-ixp4xx/coyote-pci.c
@@ -20,7 +20,7 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 66acd55..aab1954 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -19,7 +19,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c
index 07ee00c0..7e93a09 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-pci.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c
@@ -23,7 +23,7 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/pci.h>
 
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index 80044e8..59b73a0 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -22,7 +22,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
index 241bb5f..7b8a2c3 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
@@ -28,8 +28,8 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/gtwx5715.h>
+#include <mach/hardware.h>
+#include <mach/gtwx5715.h>
 #include <asm/mach/pci.h>
 
 /*
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index ef21bfb..25c21d6 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -32,12 +32,12 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/gtwx5715.h>
+#include <mach/gtwx5715.h>
 
 /*
  * Xscale UART registers are 32 bits wide with only the least
diff --git a/arch/arm/mach-ixp4xx/include/mach/avila.h b/arch/arm/mach-ixp4xx/include/mach/avila.h
new file mode 100644
index 0000000..1640cb6
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/avila.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/avila.h
+ *
+ * Gateworks Avila platform specific definitions
+ *
+ * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
+ *
+ * Based on ixdp425.h
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define	AVILA_SDA_PIN		7
+#define	AVILA_SCL_PIN		6
+
+/*
+ * AVILA PCI IRQs
+ */
+#define AVILA_PCI_MAX_DEV	4
+#define LOFT_PCI_MAX_DEV    6
+#define AVILA_PCI_IRQ_LINES	4
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define AVILA_PCI_INTA_PIN	11
+#define AVILA_PCI_INTB_PIN	10
+#define AVILA_PCI_INTC_PIN	9
+#define AVILA_PCI_INTD_PIN	8
+
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/coyote.h b/arch/arm/mach-ixp4xx/include/mach/coyote.h
new file mode 100644
index 0000000..717ac6d
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/coyote.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/coyote.h
+ *
+ * ADI Engineering platform specific definitions
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc. 
+ * 
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define	COYOTE_PCI_SLOT0_PIN	6
+#define	COYOTE_PCI_SLOT1_PIN	11
+
+#define	COYOTE_PCI_SLOT0_DEVID	14
+#define	COYOTE_PCI_SLOT1_DEVID	15
+
+#define	COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
+#define	COYOTE_IDE_BASE_VIRT	0xFFFE1000
+#define	COYOTE_IDE_REGION_SIZE	0x1000
+
+#define	COYOTE_IDE_DATA_PORT	0xFFFE10E0
+#define	COYOTE_IDE_CTRL_PORT	0xFFFE10FC
+#define	COYOTE_IDE_ERROR_PORT	0xFFFE10E2
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h
new file mode 100644
index 0000000..ff8aa23
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/cpu.h
+ *
+ * IXP4XX cpu type detection
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_CPU_H__
+#define __ASM_ARCH_CPU_H__
+
+extern unsigned int processor_id;
+/* Processor id value in CP15 Register 0 */
+#define IXP425_PROCESSOR_ID_VALUE	0x690541c0
+#define IXP435_PROCESSOR_ID_VALUE	0x69054040
+#define IXP465_PROCESSOR_ID_VALUE	0x69054200
+#define IXP4XX_PROCESSOR_ID_MASK	0xfffffff0
+
+#define cpu_is_ixp42x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+			  IXP425_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp43x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+			  IXP435_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp46x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+			  IXP465_PROCESSOR_ID_VALUE)
+
+static inline u32 ixp4xx_read_feature_bits(void)
+{
+	unsigned int val = ~*IXP4XX_EXP_CFG2;
+	val &= ~IXP4XX_FEATURE_RESERVED;
+	if (!cpu_is_ixp46x())
+		val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
+
+	return val;
+}
+
+static inline void ixp4xx_write_feature_bits(u32 value)
+{
+	*IXP4XX_EXP_CFG2 = ~value;
+}
+
+#endif  /* _ASM_ARCH_CPU_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
new file mode 100644
index 0000000..7c6a691
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -0,0 +1,24 @@
+/* arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+                .macro  addruart,rx
+                mrc     p15, 0, \rx, c1, c0
+                tst     \rx, #1                 @ MMU enabled?
+                moveq   \rx, #0xc8000000
+                movne   \rx, #0xff000000
+		orrne	\rx, \rx, #0x00b00000
+                add     \rx,\rx,#3              @ Uart regs are at off set of 3 if
+						@ byte writes used - Big Endian.
+                .endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ixp4xx/include/mach/dma.h b/arch/arm/mach-ixp4xx/include/mach/dma.h
new file mode 100644
index 0000000..00c5070c
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/dma.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/dma.h
+ *
+ * Copyright (C) 2001-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include <linux/device.h>
+#include <asm/page.h>
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/dsmg600.h b/arch/arm/mach-ixp4xx/include/mach/dsmg600.h
new file mode 100644
index 0000000..dc087a3
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/dsmg600.h
@@ -0,0 +1,52 @@
+/*
+ * DSM-G600 platform specific definitions
+ *
+ * Copyright (C) 2006 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * based on ixdp425.h:
+ *	Copyright 2004 (C) MontaVista, Software, Inc.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define DSMG600_SDA_PIN		5
+#define DSMG600_SCL_PIN		4
+
+/*
+ * DSMG600 PCI IRQs
+ */
+#define DSMG600_PCI_MAX_DEV	4
+#define DSMG600_PCI_IRQ_LINES	3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define DSMG600_PCI_INTA_PIN	11
+#define DSMG600_PCI_INTB_PIN	10
+#define DSMG600_PCI_INTC_PIN	9
+#define DSMG600_PCI_INTD_PIN	8
+#define DSMG600_PCI_INTE_PIN	7
+#define DSMG600_PCI_INTF_PIN	6
+
+/* DSM-G600 Timer Setting */
+#define DSMG600_FREQ 66000000
+
+/* Buttons */
+
+#define DSMG600_PB_GPIO		15	/* power button */
+#define DSMG600_RB_GPIO		3	/* reset button */
+
+/* Power control */
+
+#define DSMG600_PO_GPIO		2	/* power off */
+
+/* LEDs */
+
+#define DSMG600_LED_PWR_GPIO	0
+#define DSMG600_LED_WLAN_GPIO	14
diff --git a/arch/arm/mach-ixp4xx/include/mach/entry-macro.S b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
new file mode 100644
index 0000000..f2e14e9
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IXP4xx-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
+		ldr	\irqstat, [\irqstat]		@ get interrupts
+		cmp	\irqstat, #0
+		beq	1001f				@ upper IRQ?
+		clz     \irqnr, \irqstat
+		mov     \base, #31
+		sub     \irqnr, \base, \irqnr
+		b	1002f				@ lower IRQ being
+							@ handled
+
+1001:
+		/*
+		 * IXP465/IXP435 has an upper IRQ status register
+		 */
+#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
+		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET)
+		ldr	\irqstat, [\irqstat]		@ get upper interrupts
+		mov	\irqnr, #63
+		clz	\irqstat, \irqstat
+ 		cmp	\irqstat, #32
+		subne	\irqnr, \irqnr, \irqstat
+#endif
+1002:
+		.endm
+
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/fsg.h b/arch/arm/mach-ixp4xx/include/mach/fsg.h
new file mode 100644
index 0000000..1f02b7e
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/fsg.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/fsg.h
+ *
+ * Freecom FSG-3 platform specific definitions
+ *
+ * Author: Rod Whitby <rod@whitby.id.au>
+ * Author: Tomasz Chmielewski <mangoo@wpkg.org>
+ * Maintainers: http://www.nslu2-linux.org
+ *
+ * Based on coyote.h by
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define FSG_SDA_PIN		12
+#define FSG_SCL_PIN		13
+
+/*
+ * FSG PCI IRQs
+ */
+#define FSG_PCI_MAX_DEV		3
+#define FSG_PCI_IRQ_LINES	3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define FSG_PCI_INTA_PIN	6
+#define FSG_PCI_INTB_PIN	7
+#define FSG_PCI_INTC_PIN	5
+
+/* Buttons */
+
+#define FSG_SB_GPIO		4	/* sync button */
+#define FSG_RB_GPIO		9	/* reset button */
+#define FSG_UB_GPIO		10	/* usb button */
+
+/* LEDs */
+
+#define FSG_LED_WLAN_BIT	0
+#define FSG_LED_WAN_BIT		1
+#define FSG_LED_SATA_BIT	2
+#define FSG_LED_USB_BIT		4
+#define FSG_LED_RING_BIT	5
+#define FSG_LED_SYNC_BIT	7
diff --git a/arch/arm/mach-ixp4xx/include/mach/gpio.h b/arch/arm/mach-ixp4xx/include/mach/gpio.h
new file mode 100644
index 0000000..9fbde17
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/gpio.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/gpio.h
+ *
+ * IXP4XX GPIO wrappers for arch-neutral GPIO calls
+ *
+ * Written by Milan Svoboda <msvoboda@ra.rockwell.com>
+ * Based on PXA implementation by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_IXP4XX_GPIO_H
+#define __ASM_ARCH_IXP4XX_GPIO_H
+
+#include <mach/hardware.h>
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+	return;
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+	gpio_line_config(gpio, IXP4XX_GPIO_IN);
+	return 0;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int level)
+{
+	gpio_line_set(gpio, level);
+	gpio_line_config(gpio, IXP4XX_GPIO_OUT);
+	return 0;
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	int value;
+
+	gpio_line_get(gpio, &value);
+
+	return value;
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	gpio_line_set(gpio, value);
+}
+
+#include <asm-generic/gpio.h>			/* cansleep wrappers */
+
+extern int gpio_to_irq(int gpio);
+extern int irq_to_gpio(int gpio);
+
+#endif
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/gtwx5715.h b/arch/arm/mach-ixp4xx/include/mach/gtwx5715.h
new file mode 100644
index 0000000..5d5e201
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/gtwx5715.h
@@ -0,0 +1,116 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/gtwx5715.h
+ *
+ * Gemtek GTWX5715 Gateway (Linksys WRV54G)
+ *
+ * Copyright 2004 (c) George T. Joseph
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+#include "irqs.h"
+
+#define GTWX5715_GPIO0	0
+#define GTWX5715_GPIO1	1
+#define GTWX5715_GPIO2	2
+#define GTWX5715_GPIO3	3
+#define GTWX5715_GPIO4	4
+#define GTWX5715_GPIO5	5
+#define GTWX5715_GPIO6	6
+#define GTWX5715_GPIO7	7
+#define GTWX5715_GPIO8	8
+#define GTWX5715_GPIO9	9
+#define GTWX5715_GPIO10	10
+#define GTWX5715_GPIO11	11
+#define GTWX5715_GPIO12	12
+#define GTWX5715_GPIO13	13
+#define GTWX5715_GPIO14	14
+
+#define GTWX5715_GPIO0_IRQ			IRQ_IXP4XX_GPIO0
+#define GTWX5715_GPIO1_IRQ			IRQ_IXP4XX_GPIO1
+#define GTWX5715_GPIO2_IRQ			IRQ_IXP4XX_GPIO2
+#define GTWX5715_GPIO3_IRQ			IRQ_IXP4XX_GPIO3
+#define GTWX5715_GPIO4_IRQ			IRQ_IXP4XX_GPIO4
+#define GTWX5715_GPIO5_IRQ			IRQ_IXP4XX_GPIO5
+#define GTWX5715_GPIO6_IRQ			IRQ_IXP4XX_GPIO6
+#define GTWX5715_GPIO7_IRQ			IRQ_IXP4XX_GPIO7
+#define GTWX5715_GPIO8_IRQ			IRQ_IXP4XX_GPIO8
+#define GTWX5715_GPIO9_IRQ			IRQ_IXP4XX_GPIO9
+#define GTWX5715_GPIO10_IRQ		IRQ_IXP4XX_GPIO10
+#define GTWX5715_GPIO11_IRQ		IRQ_IXP4XX_GPIO11
+#define GTWX5715_GPIO12_IRQ		IRQ_IXP4XX_GPIO12
+#define GTWX5715_GPIO13_IRQ		IRQ_IXP4XX_SW_INT1
+#define GTWX5715_GPIO14_IRQ		IRQ_IXP4XX_SW_INT2
+
+/* PCI controller GPIO to IRQ pin mappings
+
+			INTA	INTB
+SLOT 0	10		11
+SLOT 1	11		10
+
+*/
+
+#define	GTWX5715_PCI_SLOT0_DEVID	0
+#define	GTWX5715_PCI_SLOT0_INTA_GPIO	GTWX5715_GPIO10
+#define	GTWX5715_PCI_SLOT0_INTB_GPIO	GTWX5715_GPIO11
+#define	GTWX5715_PCI_SLOT0_INTA_IRQ	GTWX5715_GPIO10_IRQ
+#define	GTWX5715_PCI_SLOT0_INTB_IRQ	GTWX5715_GPIO11_IRQ
+
+#define	GTWX5715_PCI_SLOT1_DEVID	1
+#define	GTWX5715_PCI_SLOT1_INTA_GPIO	GTWX5715_GPIO11
+#define	GTWX5715_PCI_SLOT1_INTB_GPIO	GTWX5715_GPIO10
+#define	GTWX5715_PCI_SLOT1_INTA_IRQ	GTWX5715_GPIO11_IRQ
+#define	GTWX5715_PCI_SLOT1_INTB_IRQ	GTWX5715_GPIO10_IRQ
+
+#define GTWX5715_PCI_SLOT_COUNT			2
+#define GTWX5715_PCI_INT_PIN_COUNT		2
+
+/*
+ * GPIO 5,6,7 and12 are hard wired to the Kendin KS8995M Switch
+ * and operate as an SPI type interface.  The details of the interface
+ * are available on Kendin/Micrel's web site.
+ */
+
+#define GTWX5715_KSSPI_SELECT	GTWX5715_GPIO5
+#define GTWX5715_KSSPI_TXD		GTWX5715_GPIO6
+#define GTWX5715_KSSPI_CLOCK	GTWX5715_GPIO7
+#define GTWX5715_KSSPI_RXD		GTWX5715_GPIO12
+
+/*
+ * The "reset" button is wired to GPIO 3.
+ * The GPIO is brought "low" when the button is pushed.
+ */
+
+#define GTWX5715_BUTTON_GPIO	GTWX5715_GPIO3
+#define GTWX5715_BUTTON_IRQ	GTWX5715_GPIO3_IRQ
+
+/*
+ *  Board Label      Front Label
+ *  LED1             Power
+ *  LED2             Wireless-G
+ *  LED3             not populated but could be
+ *  LED4             Internet
+ *  LED5 - LED8      Controlled by KS8995M Switch
+ *  LED9             DMZ
+ */
+
+#define GTWX5715_LED1_GPIO		GTWX5715_GPIO2
+#define GTWX5715_LED2_GPIO		GTWX5715_GPIO9
+#define GTWX5715_LED3_GPIO		GTWX5715_GPIO8
+#define GTWX5715_LED4_GPIO		GTWX5715_GPIO1
+#define GTWX5715_LED9_GPIO		GTWX5715_GPIO4
diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h
new file mode 100644
index 0000000..f58a43a
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/hardware.h 
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/*
+ * Hardware definitions for IXP4xx based systems
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#define __ASM_ARCH_HARDWARE_H__
+
+#define PCIBIOS_MIN_IO		0x00001000
+#define PCIBIOS_MIN_MEM		(cpu_is_ixp43x() ? 0x40000000 : 0x48000000)
+
+/*
+ * We override the standard dma-mask routines for bouncing.
+ */
+#define	HAVE_ARCH_PCI_SET_DMA_MASK
+
+#define pcibios_assign_all_busses()	1
+
+/* Register locations and bits */
+#include "ixp4xx-regs.h"
+
+#ifndef __ASSEMBLER__
+#include <mach/cpu.h>
+#endif
+
+/* Platform helper functions and definitions */
+#include "platform.h"
+
+/* Platform specific details */
+#include "ixdp425.h"
+#include "avila.h"
+#include "coyote.h"
+#include "prpmc1100.h"
+#include "nslu2.h"
+#include "nas100d.h"
+#include "dsmg600.h"
+#include "fsg.h"
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
new file mode 100644
index 0000000..319948e
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -0,0 +1,569 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/io.h
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002-2005  MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <linux/bitops.h>
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffff0000
+
+extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
+extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
+
+
+/*
+ * IXP4xx provides two methods of accessing PCI memory space:
+ *
+ * 1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
+ *    To access PCI via this space, we simply ioremap() the BAR
+ *    into the kernel and we can use the standard read[bwl]/write[bwl]
+ *    macros. This is the preffered method due to speed but it
+ *    limits the system to just 64MB of PCI memory. This can be 
+ *    problamatic if using video cards and other memory-heavy
+ *    targets.
+ *
+ * 2) If > 64MB of memory space is required, the IXP4xx can be configured
+ *    to use indirect registers to access PCI (as we do below for I/O
+ *    transactions). This allows for up to 128MB (0x48000000 to 0x4fffffff)
+ *    of memory on the bus. The disadvantage of this is that every 
+ *    PCI access requires three local register accesses plus a spinlock,
+ *    but in some cases the performance hit is acceptable. In addition,
+ *    you cannot mmap() PCI devices in this case.
+ *
+ */
+#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
+
+#define __mem_pci(a)		(a)
+
+#else
+
+#include <linux/mm.h>
+
+/*
+ * In the case of using indirect PCI, we simply return the actual PCI
+ * address and our read/write implementation use that to drive the 
+ * access registers. If something outside of PCI is ioremap'd, we
+ * fallback to the default.
+ */
+static inline void __iomem *
+__ixp4xx_ioremap(unsigned long addr, size_t size, unsigned int mtype)
+{
+	if((addr < PCIBIOS_MIN_MEM) || (addr > 0x4fffffff))
+		return __arm_ioremap(addr, size, mtype);
+
+	return (void __iomem *)addr;
+}
+
+static inline void
+__ixp4xx_iounmap(void __iomem *addr)
+{
+	if ((__force u32)addr >= VMALLOC_START)
+		__iounmap(addr);
+}
+
+#define __arch_ioremap(a, s, f)		__ixp4xx_ioremap(a, s, f)
+#define	__arch_iounmap(a)		__ixp4xx_iounmap(a)
+
+#define	writeb(v, p)			__ixp4xx_writeb(v, p)
+#define	writew(v, p)			__ixp4xx_writew(v, p)
+#define	writel(v, p)			__ixp4xx_writel(v, p)
+
+#define	writesb(p, v, l)		__ixp4xx_writesb(p, v, l)
+#define	writesw(p, v, l)		__ixp4xx_writesw(p, v, l)
+#define	writesl(p, v, l)		__ixp4xx_writesl(p, v, l)
+	
+#define	readb(p)			__ixp4xx_readb(p)
+#define	readw(p)			__ixp4xx_readw(p)
+#define	readl(p)			__ixp4xx_readl(p)
+	
+#define	readsb(p, v, l)			__ixp4xx_readsb(p, v, l)
+#define	readsw(p, v, l)			__ixp4xx_readsw(p, v, l)
+#define	readsl(p, v, l)			__ixp4xx_readsl(p, v, l)
+
+static inline void 
+__ixp4xx_writeb(u8 value, volatile void __iomem *p)
+{
+	u32 addr = (u32)p;
+	u32 n, byte_enables, data;
+
+	if (addr >= VMALLOC_START) {
+		__raw_writeb(value, addr);
+		return;
+	}
+
+	n = addr % 4;
+	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+	data = value << (8*n);
+	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
+}
+
+static inline void
+__ixp4xx_writesb(volatile void __iomem *bus_addr, const u8 *vaddr, int count)
+{
+	while (count--)
+		writeb(*vaddr++, bus_addr);
+}
+
+static inline void 
+__ixp4xx_writew(u16 value, volatile void __iomem *p)
+{
+	u32 addr = (u32)p;
+	u32 n, byte_enables, data;
+
+	if (addr >= VMALLOC_START) {
+		__raw_writew(value, addr);
+		return;
+	}
+
+	n = addr % 4;
+	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+	data = value << (8*n);
+	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
+}
+
+static inline void
+__ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count)
+{
+	while (count--)
+		writew(*vaddr++, bus_addr);
+}
+
+static inline void 
+__ixp4xx_writel(u32 value, volatile void __iomem *p)
+{
+	u32 addr = (__force u32)p;
+	if (addr >= VMALLOC_START) {
+		__raw_writel(value, p);
+		return;
+	}
+
+	ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value);
+}
+
+static inline void
+__ixp4xx_writesl(volatile void __iomem *bus_addr, const u32 *vaddr, int count)
+{
+	while (count--)
+		writel(*vaddr++, bus_addr);
+}
+
+static inline unsigned char 
+__ixp4xx_readb(const volatile void __iomem *p)
+{
+	u32 addr = (u32)p;
+	u32 n, byte_enables, data;
+
+	if (addr >= VMALLOC_START)
+		return __raw_readb(addr);
+
+	n = addr % 4;
+	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
+		return 0xff;
+
+	return data >> (8*n);
+}
+
+static inline void
+__ixp4xx_readsb(const volatile void __iomem *bus_addr, u8 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = readb(bus_addr);
+}
+
+static inline unsigned short 
+__ixp4xx_readw(const volatile void __iomem *p)
+{
+	u32 addr = (u32)p;
+	u32 n, byte_enables, data;
+
+	if (addr >= VMALLOC_START)
+		return __raw_readw(addr);
+
+	n = addr % 4;
+	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
+		return 0xffff;
+
+	return data>>(8*n);
+}
+
+static inline void 
+__ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = readw(bus_addr);
+}
+
+static inline unsigned long 
+__ixp4xx_readl(const volatile void __iomem *p)
+{
+	u32 addr = (__force u32)p;
+	u32 data;
+
+	if (addr >= VMALLOC_START)
+		return __raw_readl(p);
+
+	if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data))
+		return 0xffffffff;
+
+	return data;
+}
+
+static inline void 
+__ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = readl(bus_addr);
+}
+
+
+/*
+ * We can use the built-in functions b/c they end up calling writeb/readb
+ */
+#define memset_io(c,v,l)		_memset_io((c),(v),(l))
+#define memcpy_fromio(a,c,l)		_memcpy_fromio((a),(c),(l))
+#define memcpy_toio(c,a,l)		_memcpy_toio((c),(a),(l))
+
+#endif
+
+#ifndef CONFIG_PCI
+
+#define	__io(v)		v
+
+#else
+
+/*
+ * IXP4xx does not have a transparent cpu -> PCI I/O translation
+ * window.  Instead, it has a set of registers that must be tweaked
+ * with the proper byte lanes, command types, and address for the
+ * transaction.  This means that we need to override the default
+ * I/O functions.
+ */
+#define	outb(p, v)			__ixp4xx_outb(p, v)
+#define	outw(p, v)			__ixp4xx_outw(p, v)
+#define	outl(p, v)			__ixp4xx_outl(p, v)
+	
+#define	outsb(p, v, l)			__ixp4xx_outsb(p, v, l)
+#define	outsw(p, v, l)			__ixp4xx_outsw(p, v, l)
+#define	outsl(p, v, l)			__ixp4xx_outsl(p, v, l)
+
+#define	inb(p)				__ixp4xx_inb(p)
+#define	inw(p)				__ixp4xx_inw(p)
+#define	inl(p)				__ixp4xx_inl(p)
+
+#define	insb(p, v, l)			__ixp4xx_insb(p, v, l)
+#define	insw(p, v, l)			__ixp4xx_insw(p, v, l)
+#define	insl(p, v, l)			__ixp4xx_insl(p, v, l)
+
+
+static inline void 
+__ixp4xx_outb(u8 value, u32 addr)
+{
+	u32 n, byte_enables, data;
+	n = addr % 4;
+	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+	data = value << (8*n);
+	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
+}
+
+static inline void 
+__ixp4xx_outsb(u32 io_addr, const u8 *vaddr, u32 count)
+{
+	while (count--)
+		outb(*vaddr++, io_addr);
+}
+
+static inline void 
+__ixp4xx_outw(u16 value, u32 addr)
+{
+	u32 n, byte_enables, data;
+	n = addr % 4;
+	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+	data = value << (8*n);
+	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
+}
+
+static inline void 
+__ixp4xx_outsw(u32 io_addr, const u16 *vaddr, u32 count)
+{
+	while (count--)
+		outw(cpu_to_le16(*vaddr++), io_addr);
+}
+
+static inline void 
+__ixp4xx_outl(u32 value, u32 addr)
+{
+	ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value);
+}
+
+static inline void 
+__ixp4xx_outsl(u32 io_addr, const u32 *vaddr, u32 count)
+{
+	while (count--)
+		outl(*vaddr++, io_addr);
+}
+
+static inline u8 
+__ixp4xx_inb(u32 addr)
+{
+	u32 n, byte_enables, data;
+	n = addr % 4;
+	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
+		return 0xff;
+
+	return data >> (8*n);
+}
+
+static inline void 
+__ixp4xx_insb(u32 io_addr, u8 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = inb(io_addr);
+}
+
+static inline u16 
+__ixp4xx_inw(u32 addr)
+{
+	u32 n, byte_enables, data;
+	n = addr % 4;
+	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
+		return 0xffff;
+
+	return data>>(8*n);
+}
+
+static inline void 
+__ixp4xx_insw(u32 io_addr, u16 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = le16_to_cpu(inw(io_addr));
+}
+
+static inline u32 
+__ixp4xx_inl(u32 addr)
+{
+	u32 data;
+	if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data))
+		return 0xffffffff;
+
+	return data;
+}
+
+static inline void 
+__ixp4xx_insl(u32 io_addr, u32 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = inl(io_addr);
+}
+
+#define PIO_OFFSET      0x10000UL
+#define PIO_MASK        0x0ffffUL
+
+#define	__is_io_address(p)	(((unsigned long)p >= PIO_OFFSET) && \
+					((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
+static inline unsigned int
+__ixp4xx_ioread8(const void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		return	(unsigned int)__ixp4xx_inb(port & PIO_MASK);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		return (unsigned int)__raw_readb(port);
+#else
+		return (unsigned int)__ixp4xx_readb(addr);
+#endif
+}
+
+static inline void
+__ixp4xx_ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_insb(port & PIO_MASK, vaddr, count);
+	else
+#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_readsb(addr, vaddr, count);
+#else
+		__ixp4xx_readsb(addr, vaddr, count);
+#endif
+}
+
+static inline unsigned int
+__ixp4xx_ioread16(const void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		return	(unsigned int)__ixp4xx_inw(port & PIO_MASK);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		return le16_to_cpu(__raw_readw((u32)port));
+#else
+		return (unsigned int)__ixp4xx_readw(addr);
+#endif
+}
+
+static inline void
+__ixp4xx_ioread16_rep(const void __iomem *addr, void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_insw(port & PIO_MASK, vaddr, count);
+	else
+#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_readsw(addr, vaddr, count);
+#else
+		__ixp4xx_readsw(addr, vaddr, count);
+#endif
+}
+
+static inline unsigned int
+__ixp4xx_ioread32(const void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		return	(unsigned int)__ixp4xx_inl(port & PIO_MASK);
+	else {
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		return le32_to_cpu((__force __le32)__raw_readl(addr));
+#else
+		return (unsigned int)__ixp4xx_readl(addr);
+#endif
+	}
+}
+
+static inline void
+__ixp4xx_ioread32_rep(const void __iomem *addr, void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_insl(port & PIO_MASK, vaddr, count);
+	else
+#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_readsl(addr, vaddr, count);
+#else
+		__ixp4xx_readsl(addr, vaddr, count);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite8(u8 value, void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outb(value, port & PIO_MASK);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writeb(value, port);
+#else
+		__ixp4xx_writeb(value, addr);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite8_rep(void __iomem *addr, const void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outsb(port & PIO_MASK, vaddr, count);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writesb(addr, vaddr, count);
+#else
+		__ixp4xx_writesb(addr, vaddr, count);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite16(u16 value, void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outw(value, port & PIO_MASK);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writew(cpu_to_le16(value), addr);
+#else
+		__ixp4xx_writew(value, addr);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite16_rep(void __iomem *addr, const void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outsw(port & PIO_MASK, vaddr, count);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writesw(addr, vaddr, count);
+#else
+		__ixp4xx_writesw(addr, vaddr, count);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite32(u32 value, void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outl(value, port & PIO_MASK);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writel((u32 __force)cpu_to_le32(value), addr);
+#else
+		__ixp4xx_writel(value, addr);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite32_rep(void __iomem *addr, const void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outsl(port & PIO_MASK, vaddr, count);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writesl(addr, vaddr, count);
+#else
+		__ixp4xx_writesl(addr, vaddr, count);
+#endif
+}
+
+#define	ioread8(p)			__ixp4xx_ioread8(p)
+#define	ioread16(p)			__ixp4xx_ioread16(p)
+#define	ioread32(p)			__ixp4xx_ioread32(p)
+
+#define	ioread8_rep(p, v, c)		__ixp4xx_ioread8_rep(p, v, c)
+#define	ioread16_rep(p, v, c)		__ixp4xx_ioread16_rep(p, v, c)
+#define	ioread32_rep(p, v, c)		__ixp4xx_ioread32_rep(p, v, c)
+
+#define	iowrite8(v,p)			__ixp4xx_iowrite8(v,p)
+#define	iowrite16(v,p)			__ixp4xx_iowrite16(v,p)
+#define	iowrite32(v,p)			__ixp4xx_iowrite32(v,p)
+
+#define	iowrite8_rep(p, v, c)		__ixp4xx_iowrite8_rep(p, v, c)
+#define	iowrite16_rep(p, v, c)		__ixp4xx_iowrite16_rep(p, v, c)
+#define	iowrite32_rep(p, v, c)		__ixp4xx_iowrite32_rep(p, v, c)
+
+#define	ioport_map(port, nr)		((void __iomem*)(port + PIO_OFFSET))
+#define	ioport_unmap(addr)
+#endif	// !CONFIG_PCI
+
+#endif	//  __ASM_ARM_ARCH_IO_H
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/irqs.h b/arch/arm/mach-ixp4xx/include/mach/irqs.h
new file mode 100644
index 0000000..f4d74de
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/irqs.h
@@ -0,0 +1,138 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/irqs.h 
+ *
+ * IRQ definitions for IXP4XX based systems
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ARCH_IXP4XX_IRQS_H_
+#define _ARCH_IXP4XX_IRQS_H_
+
+
+#define IRQ_IXP4XX_NPEA		0
+#define IRQ_IXP4XX_NPEB		1
+#define IRQ_IXP4XX_NPEC		2
+#define IRQ_IXP4XX_QM1		3
+#define IRQ_IXP4XX_QM2		4
+#define IRQ_IXP4XX_TIMER1	5
+#define IRQ_IXP4XX_GPIO0	6
+#define IRQ_IXP4XX_GPIO1	7
+#define IRQ_IXP4XX_PCI_INT	8
+#define IRQ_IXP4XX_PCI_DMA1	9
+#define IRQ_IXP4XX_PCI_DMA2	10
+#define IRQ_IXP4XX_TIMER2	11
+#define IRQ_IXP4XX_USB		12
+#define IRQ_IXP4XX_UART2	13
+#define IRQ_IXP4XX_TIMESTAMP	14
+#define IRQ_IXP4XX_UART1	15
+#define IRQ_IXP4XX_WDOG		16
+#define IRQ_IXP4XX_AHB_PMU	17
+#define IRQ_IXP4XX_XSCALE_PMU	18
+#define IRQ_IXP4XX_GPIO2	19
+#define IRQ_IXP4XX_GPIO3	20
+#define IRQ_IXP4XX_GPIO4	21
+#define IRQ_IXP4XX_GPIO5	22
+#define IRQ_IXP4XX_GPIO6	23
+#define IRQ_IXP4XX_GPIO7	24
+#define IRQ_IXP4XX_GPIO8	25
+#define IRQ_IXP4XX_GPIO9	26
+#define IRQ_IXP4XX_GPIO10	27
+#define IRQ_IXP4XX_GPIO11	28
+#define IRQ_IXP4XX_GPIO12	29
+#define IRQ_IXP4XX_SW_INT1	30
+#define IRQ_IXP4XX_SW_INT2	31
+#define IRQ_IXP4XX_USB_HOST	32
+#define IRQ_IXP4XX_I2C		33
+#define IRQ_IXP4XX_SSP		34
+#define IRQ_IXP4XX_TSYNC	35
+#define IRQ_IXP4XX_EAU_DONE	36
+#define IRQ_IXP4XX_SHA_DONE	37
+#define IRQ_IXP4XX_SWCP_PE	58
+#define IRQ_IXP4XX_QM_PE	60
+#define IRQ_IXP4XX_MCU_ECC	61
+#define IRQ_IXP4XX_EXP_PE	62
+
+/*
+ * Only first 32 sources are valid if running on IXP42x systems
+ */
+#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
+#define NR_IRQS			64
+#else
+#define NR_IRQS			32
+#endif
+
+#define	XSCALE_PMU_IRQ		(IRQ_IXP4XX_XSCALE_PMU)
+
+/*
+ * IXDP425 board IRQs
+ */
+#define	IRQ_IXDP425_PCI_INTA	IRQ_IXP4XX_GPIO11
+#define	IRQ_IXDP425_PCI_INTB	IRQ_IXP4XX_GPIO10
+#define	IRQ_IXDP425_PCI_INTC	IRQ_IXP4XX_GPIO9
+#define	IRQ_IXDP425_PCI_INTD	IRQ_IXP4XX_GPIO8
+
+/*
+ * Gateworks Avila board IRQs
+ */
+#define	IRQ_AVILA_PCI_INTA	IRQ_IXP4XX_GPIO11
+#define	IRQ_AVILA_PCI_INTB	IRQ_IXP4XX_GPIO10
+#define	IRQ_AVILA_PCI_INTC	IRQ_IXP4XX_GPIO9
+#define	IRQ_AVILA_PCI_INTD	IRQ_IXP4XX_GPIO8
+
+
+/*
+ * PrPMC1100 Board IRQs
+ */
+#define	IRQ_PRPMC1100_PCI_INTA	IRQ_IXP4XX_GPIO11
+#define	IRQ_PRPMC1100_PCI_INTB	IRQ_IXP4XX_GPIO10
+#define	IRQ_PRPMC1100_PCI_INTC	IRQ_IXP4XX_GPIO9
+#define	IRQ_PRPMC1100_PCI_INTD	IRQ_IXP4XX_GPIO8
+
+/*
+ * ADI Coyote Board IRQs
+ */
+#define	IRQ_COYOTE_PCI_SLOT0	IRQ_IXP4XX_GPIO6
+#define	IRQ_COYOTE_PCI_SLOT1	IRQ_IXP4XX_GPIO11
+#define	IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
+
+/*
+ * NSLU2 board IRQs
+ */
+#define        IRQ_NSLU2_PCI_INTA      IRQ_IXP4XX_GPIO11
+#define        IRQ_NSLU2_PCI_INTB      IRQ_IXP4XX_GPIO10
+#define        IRQ_NSLU2_PCI_INTC      IRQ_IXP4XX_GPIO9
+
+/*
+ * NAS100D board IRQs
+ */
+#define        IRQ_NAS100D_PCI_INTA    IRQ_IXP4XX_GPIO11
+#define        IRQ_NAS100D_PCI_INTB    IRQ_IXP4XX_GPIO10
+#define        IRQ_NAS100D_PCI_INTC    IRQ_IXP4XX_GPIO9
+#define        IRQ_NAS100D_PCI_INTD    IRQ_IXP4XX_GPIO8
+#define        IRQ_NAS100D_PCI_INTE    IRQ_IXP4XX_GPIO7
+
+/*
+ * D-Link DSM-G600 RevA board IRQs
+ */
+#define        IRQ_DSMG600_PCI_INTA    IRQ_IXP4XX_GPIO11
+#define        IRQ_DSMG600_PCI_INTB    IRQ_IXP4XX_GPIO10
+#define        IRQ_DSMG600_PCI_INTC    IRQ_IXP4XX_GPIO9
+#define        IRQ_DSMG600_PCI_INTD    IRQ_IXP4XX_GPIO8
+#define        IRQ_DSMG600_PCI_INTE    IRQ_IXP4XX_GPIO7
+#define        IRQ_DSMG600_PCI_INTF    IRQ_IXP4XX_GPIO6
+
+/*
+ * Freecom FSG-3 Board IRQs
+ */
+#define        IRQ_FSG_PCI_INTA        IRQ_IXP4XX_GPIO6
+#define        IRQ_FSG_PCI_INTB        IRQ_IXP4XX_GPIO7
+#define        IRQ_FSG_PCI_INTC        IRQ_IXP4XX_GPIO5
+
+#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixdp425.h b/arch/arm/mach-ixp4xx/include/mach/ixdp425.h
new file mode 100644
index 0000000..2cafe65
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/ixdp425.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/ixdp425.h
+ *
+ * IXDP425 platform specific definitions
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc. 
+ * 
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define	IXDP425_SDA_PIN		7
+#define	IXDP425_SCL_PIN		6
+
+/*
+ * IXDP425 PCI IRQs
+ */
+#define IXDP425_PCI_MAX_DEV	4
+#define IXDP425_PCI_IRQ_LINES	4
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define IXDP425_PCI_INTA_PIN	11
+#define IXDP425_PCI_INTB_PIN	10
+#define	IXDP425_PCI_INTC_PIN	9
+#define	IXDP425_PCI_INTD_PIN	8
+
+/* NAND Flash pins */
+#define	IXDP425_NAND_NCE_PIN	12
+
+#define	IXDP425_NAND_CMD_BYTE	0x01
+#define	IXDP425_NAND_ADDR_BYTE	0x02
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
new file mode 100644
index 0000000..ad9c888
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
@@ -0,0 +1,638 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+ *
+ * Register definitions for IXP4xx chipset. This file contains 
+ * register location and bit definitions only. Platform specific 
+ * definitions and helper function declarations are in platform.h 
+ * and machine-name.h.
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ASM_ARM_IXP4XX_H_
+#define _ASM_ARM_IXP4XX_H_
+
+/*
+ * IXP4xx Linux Memory Map:
+ *
+ * Phy		Size		Virt		Description
+ * =========================================================================
+ *
+ * 0x00000000	0x10000000(max)	PAGE_OFFSET	System RAM
+ *
+ * 0x48000000	0x04000000	ioremap'd	PCI Memory Space
+ *
+ * 0x50000000	0x10000000	ioremap'd	EXP BUS
+ *
+ * 0x6000000	0x00004000	ioremap'd	QMgr
+ *
+ * 0xC0000000	0x00001000	0xffbff000	PCI CFG
+ *
+ * 0xC4000000	0x00001000	0xffbfe000	EXP CFG
+ *
+ * 0xC8000000	0x00013000	0xffbeb000	On-Chip Peripherals
+ */
+
+/*
+ * Queue Manager
+ */
+#define IXP4XX_QMGR_BASE_PHYS		(0x60000000)
+#define IXP4XX_QMGR_REGION_SIZE		(0x00004000)
+
+/*
+ * Expansion BUS Configuration registers
+ */
+#define IXP4XX_EXP_CFG_BASE_PHYS	(0xC4000000)
+#define IXP4XX_EXP_CFG_BASE_VIRT	(0xFFBFE000)
+#define IXP4XX_EXP_CFG_REGION_SIZE	(0x00001000)
+
+/*
+ * PCI Config registers
+ */
+#define IXP4XX_PCI_CFG_BASE_PHYS	(0xC0000000)
+#define	IXP4XX_PCI_CFG_BASE_VIRT	(0xFFBFF000)
+#define IXP4XX_PCI_CFG_REGION_SIZE	(0x00001000)
+
+/*
+ * Peripheral space
+ */
+#define IXP4XX_PERIPHERAL_BASE_PHYS	(0xC8000000)
+#define IXP4XX_PERIPHERAL_BASE_VIRT	(0xFFBEB000)
+#define IXP4XX_PERIPHERAL_REGION_SIZE	(0x00013000)
+
+/*
+ * Debug UART
+ *
+ * This is basically a remap of UART1 into a region that is section
+ * aligned so that it * can be used with the low-level debug code.
+ */
+#define	IXP4XX_DEBUG_UART_BASE_PHYS	(0xC8000000)
+#define	IXP4XX_DEBUG_UART_BASE_VIRT	(0xffb00000)
+#define	IXP4XX_DEBUG_UART_REGION_SIZE	(0x00001000)
+
+#define IXP4XX_EXP_CS0_OFFSET	0x00
+#define IXP4XX_EXP_CS1_OFFSET   0x04
+#define IXP4XX_EXP_CS2_OFFSET   0x08
+#define IXP4XX_EXP_CS3_OFFSET   0x0C
+#define IXP4XX_EXP_CS4_OFFSET   0x10
+#define IXP4XX_EXP_CS5_OFFSET   0x14
+#define IXP4XX_EXP_CS6_OFFSET   0x18
+#define IXP4XX_EXP_CS7_OFFSET   0x1C
+#define IXP4XX_EXP_CFG0_OFFSET	0x20
+#define IXP4XX_EXP_CFG1_OFFSET	0x24
+#define IXP4XX_EXP_CFG2_OFFSET	0x28
+#define IXP4XX_EXP_CFG3_OFFSET	0x2C
+
+/*
+ * Expansion Bus Controller registers.
+ */
+#define IXP4XX_EXP_REG(x) ((volatile u32 *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
+
+#define IXP4XX_EXP_CS0      IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET)
+#define IXP4XX_EXP_CS1      IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET)
+#define IXP4XX_EXP_CS2      IXP4XX_EXP_REG(IXP4XX_EXP_CS2_OFFSET) 
+#define IXP4XX_EXP_CS3      IXP4XX_EXP_REG(IXP4XX_EXP_CS3_OFFSET)
+#define IXP4XX_EXP_CS4      IXP4XX_EXP_REG(IXP4XX_EXP_CS4_OFFSET)
+#define IXP4XX_EXP_CS5      IXP4XX_EXP_REG(IXP4XX_EXP_CS5_OFFSET)
+#define IXP4XX_EXP_CS6      IXP4XX_EXP_REG(IXP4XX_EXP_CS6_OFFSET)     
+#define IXP4XX_EXP_CS7      IXP4XX_EXP_REG(IXP4XX_EXP_CS7_OFFSET)
+
+#define IXP4XX_EXP_CFG0     IXP4XX_EXP_REG(IXP4XX_EXP_CFG0_OFFSET) 
+#define IXP4XX_EXP_CFG1     IXP4XX_EXP_REG(IXP4XX_EXP_CFG1_OFFSET) 
+#define IXP4XX_EXP_CFG2     IXP4XX_EXP_REG(IXP4XX_EXP_CFG2_OFFSET) 
+#define IXP4XX_EXP_CFG3     IXP4XX_EXP_REG(IXP4XX_EXP_CFG3_OFFSET)
+
+
+/*
+ * Peripheral Space Register Region Base Addresses
+ */
+#define IXP4XX_UART1_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000)
+#define IXP4XX_UART2_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000)
+#define IXP4XX_PMU_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000)
+#define IXP4XX_INTC_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000)
+#define IXP4XX_GPIO_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000)
+#define IXP4XX_TIMER_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000)
+#define IXP4XX_NPEA_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000)
+#define IXP4XX_NPEB_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000)
+#define IXP4XX_NPEC_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000)
+#define IXP4XX_EthB_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000)
+#define IXP4XX_EthC_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000)
+#define IXP4XX_USB_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000)
+/* ixp46X only */
+#define IXP4XX_EthA_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xC000)
+#define IXP4XX_EthB1_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xD000)
+#define IXP4XX_EthB2_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xE000)
+#define IXP4XX_EthB3_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xF000)
+#define IXP4XX_TIMESYNC_BASE_PHYS	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x10000)
+#define IXP4XX_I2C_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x11000)
+#define IXP4XX_SSP_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000)
+
+
+#define IXP4XX_UART1_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000)
+#define IXP4XX_UART2_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000)
+#define IXP4XX_PMU_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000)
+#define IXP4XX_INTC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000)
+#define IXP4XX_GPIO_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000)
+#define IXP4XX_TIMER_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000)
+#define IXP4XX_NPEA_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x6000)
+#define IXP4XX_NPEB_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x7000)
+#define IXP4XX_NPEC_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x8000)
+#define IXP4XX_EthB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000)
+#define IXP4XX_EthC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000)
+#define IXP4XX_USB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000)
+/* ixp46X only */
+#define IXP4XX_EthA_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xC000)
+#define IXP4XX_EthB1_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xD000)
+#define IXP4XX_EthB2_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xE000)
+#define IXP4XX_EthB3_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xF000)
+#define IXP4XX_TIMESYNC_BASE_VIRT	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x10000)
+#define IXP4XX_I2C_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000)
+#define IXP4XX_SSP_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000)
+
+/*
+ * Constants to make it easy to access  Interrupt Controller registers
+ */
+#define IXP4XX_ICPR_OFFSET	0x00 /* Interrupt Status */
+#define IXP4XX_ICMR_OFFSET	0x04 /* Interrupt Enable */
+#define IXP4XX_ICLR_OFFSET	0x08 /* Interrupt IRQ/FIQ Select */
+#define IXP4XX_ICIP_OFFSET      0x0C /* IRQ Status */
+#define IXP4XX_ICFP_OFFSET	0x10 /* FIQ Status */
+#define IXP4XX_ICHR_OFFSET	0x14 /* Interrupt Priority */
+#define IXP4XX_ICIH_OFFSET	0x18 /* IRQ Highest Pri Int */
+#define IXP4XX_ICFH_OFFSET	0x1C /* FIQ Highest Pri Int */
+
+/*
+ * IXP465-only
+ */
+#define	IXP4XX_ICPR2_OFFSET	0x20 /* Interrupt Status 2 */
+#define	IXP4XX_ICMR2_OFFSET	0x24 /* Interrupt Enable 2 */
+#define	IXP4XX_ICLR2_OFFSET	0x28 /* Interrupt IRQ/FIQ Select 2 */
+#define IXP4XX_ICIP2_OFFSET     0x2C /* IRQ Status */
+#define IXP4XX_ICFP2_OFFSET	0x30 /* FIQ Status */
+#define IXP4XX_ICEEN_OFFSET	0x34 /* Error High Pri Enable */
+
+
+/*
+ * Interrupt Controller Register Definitions.
+ */
+
+#define IXP4XX_INTC_REG(x) ((volatile u32 *)(IXP4XX_INTC_BASE_VIRT+(x)))
+
+#define IXP4XX_ICPR	IXP4XX_INTC_REG(IXP4XX_ICPR_OFFSET)
+#define IXP4XX_ICMR     IXP4XX_INTC_REG(IXP4XX_ICMR_OFFSET)
+#define IXP4XX_ICLR     IXP4XX_INTC_REG(IXP4XX_ICLR_OFFSET)
+#define IXP4XX_ICIP     IXP4XX_INTC_REG(IXP4XX_ICIP_OFFSET)
+#define IXP4XX_ICFP     IXP4XX_INTC_REG(IXP4XX_ICFP_OFFSET)
+#define IXP4XX_ICHR     IXP4XX_INTC_REG(IXP4XX_ICHR_OFFSET)
+#define IXP4XX_ICIH     IXP4XX_INTC_REG(IXP4XX_ICIH_OFFSET) 
+#define IXP4XX_ICFH     IXP4XX_INTC_REG(IXP4XX_ICFH_OFFSET)
+#define IXP4XX_ICPR2	IXP4XX_INTC_REG(IXP4XX_ICPR2_OFFSET)
+#define IXP4XX_ICMR2    IXP4XX_INTC_REG(IXP4XX_ICMR2_OFFSET)
+#define IXP4XX_ICLR2    IXP4XX_INTC_REG(IXP4XX_ICLR2_OFFSET)
+#define IXP4XX_ICIP2    IXP4XX_INTC_REG(IXP4XX_ICIP2_OFFSET)
+#define IXP4XX_ICFP2    IXP4XX_INTC_REG(IXP4XX_ICFP2_OFFSET)
+#define IXP4XX_ICEEN    IXP4XX_INTC_REG(IXP4XX_ICEEN_OFFSET)
+                                                                                
+/*
+ * Constants to make it easy to access GPIO registers
+ */
+#define IXP4XX_GPIO_GPOUTR_OFFSET       0x00
+#define IXP4XX_GPIO_GPOER_OFFSET        0x04
+#define IXP4XX_GPIO_GPINR_OFFSET        0x08
+#define IXP4XX_GPIO_GPISR_OFFSET        0x0C
+#define IXP4XX_GPIO_GPIT1R_OFFSET	0x10
+#define IXP4XX_GPIO_GPIT2R_OFFSET	0x14
+#define IXP4XX_GPIO_GPCLKR_OFFSET	0x18
+#define IXP4XX_GPIO_GPDBSELR_OFFSET	0x1C
+
+/* 
+ * GPIO Register Definitions.
+ * [Only perform 32bit reads/writes]
+ */
+#define IXP4XX_GPIO_REG(x) ((volatile u32 *)(IXP4XX_GPIO_BASE_VIRT+(x)))
+
+#define IXP4XX_GPIO_GPOUTR	IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOUTR_OFFSET)
+#define IXP4XX_GPIO_GPOER       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOER_OFFSET)
+#define IXP4XX_GPIO_GPINR       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPINR_OFFSET)
+#define IXP4XX_GPIO_GPISR       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPISR_OFFSET)
+#define IXP4XX_GPIO_GPIT1R      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT1R_OFFSET)
+#define IXP4XX_GPIO_GPIT2R      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT2R_OFFSET)
+#define IXP4XX_GPIO_GPCLKR      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPCLKR_OFFSET)
+#define IXP4XX_GPIO_GPDBSELR    IXP4XX_GPIO_REG(IXP4XX_GPIO_GPDBSELR_OFFSET)
+
+/*
+ * GPIO register bit definitions
+ */
+
+/* Interrupt styles
+ */
+#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH	0x0
+#define IXP4XX_GPIO_STYLE_ACTIVE_LOW	0x1
+#define IXP4XX_GPIO_STYLE_RISING_EDGE	0x2
+#define IXP4XX_GPIO_STYLE_FALLING_EDGE	0x3
+#define IXP4XX_GPIO_STYLE_TRANSITIONAL	0x4
+
+/* 
+ * Mask used to clear interrupt styles 
+ */
+#define IXP4XX_GPIO_STYLE_CLEAR		0x7
+#define IXP4XX_GPIO_STYLE_SIZE		3
+
+/*
+ * Constants to make it easy to access Timer Control/Status registers
+ */
+#define IXP4XX_OSTS_OFFSET	0x00  /* Continious TimeStamp */
+#define IXP4XX_OST1_OFFSET	0x04  /* Timer 1 Timestamp */
+#define IXP4XX_OSRT1_OFFSET	0x08  /* Timer 1 Reload */
+#define IXP4XX_OST2_OFFSET	0x0C  /* Timer 2 Timestamp */
+#define IXP4XX_OSRT2_OFFSET	0x10  /* Timer 2 Reload */
+#define IXP4XX_OSWT_OFFSET	0x14  /* Watchdog Timer */
+#define IXP4XX_OSWE_OFFSET	0x18  /* Watchdog Enable */
+#define IXP4XX_OSWK_OFFSET	0x1C  /* Watchdog Key */
+#define IXP4XX_OSST_OFFSET	0x20  /* Timer Status */
+
+/*
+ * Operating System Timer Register Definitions.
+ */
+
+#define IXP4XX_TIMER_REG(x) ((volatile u32 *)(IXP4XX_TIMER_BASE_VIRT+(x)))
+
+#define IXP4XX_OSTS	IXP4XX_TIMER_REG(IXP4XX_OSTS_OFFSET)
+#define IXP4XX_OST1	IXP4XX_TIMER_REG(IXP4XX_OST1_OFFSET)
+#define IXP4XX_OSRT1	IXP4XX_TIMER_REG(IXP4XX_OSRT1_OFFSET)
+#define IXP4XX_OST2	IXP4XX_TIMER_REG(IXP4XX_OST2_OFFSET)
+#define IXP4XX_OSRT2	IXP4XX_TIMER_REG(IXP4XX_OSRT2_OFFSET)
+#define IXP4XX_OSWT	IXP4XX_TIMER_REG(IXP4XX_OSWT_OFFSET)
+#define IXP4XX_OSWE	IXP4XX_TIMER_REG(IXP4XX_OSWE_OFFSET)
+#define IXP4XX_OSWK	IXP4XX_TIMER_REG(IXP4XX_OSWK_OFFSET)
+#define IXP4XX_OSST	IXP4XX_TIMER_REG(IXP4XX_OSST_OFFSET)
+
+/*
+ * Timer register values and bit definitions 
+ */
+#define IXP4XX_OST_ENABLE		0x00000001
+#define IXP4XX_OST_ONE_SHOT		0x00000002
+/* Low order bits of reload value ignored */
+#define IXP4XX_OST_RELOAD_MASK		0x00000003
+#define IXP4XX_OST_DISABLED		0x00000000
+#define IXP4XX_OSST_TIMER_1_PEND	0x00000001
+#define IXP4XX_OSST_TIMER_2_PEND	0x00000002
+#define IXP4XX_OSST_TIMER_TS_PEND	0x00000004
+#define IXP4XX_OSST_TIMER_WDOG_PEND	0x00000008
+#define IXP4XX_OSST_TIMER_WARM_RESET	0x00000010
+
+#define	IXP4XX_WDT_KEY			0x0000482E
+
+#define	IXP4XX_WDT_RESET_ENABLE		0x00000001
+#define	IXP4XX_WDT_IRQ_ENABLE		0x00000002
+#define	IXP4XX_WDT_COUNT_ENABLE		0x00000004
+
+
+/*
+ * Constants to make it easy to access PCI Control/Status registers
+ */
+#define PCI_NP_AD_OFFSET            0x00
+#define PCI_NP_CBE_OFFSET           0x04
+#define PCI_NP_WDATA_OFFSET         0x08
+#define PCI_NP_RDATA_OFFSET         0x0c
+#define PCI_CRP_AD_CBE_OFFSET       0x10
+#define PCI_CRP_WDATA_OFFSET        0x14
+#define PCI_CRP_RDATA_OFFSET        0x18
+#define PCI_CSR_OFFSET              0x1c
+#define PCI_ISR_OFFSET              0x20
+#define PCI_INTEN_OFFSET            0x24
+#define PCI_DMACTRL_OFFSET          0x28
+#define PCI_AHBMEMBASE_OFFSET       0x2c
+#define PCI_AHBIOBASE_OFFSET        0x30
+#define PCI_PCIMEMBASE_OFFSET       0x34
+#define PCI_AHBDOORBELL_OFFSET      0x38
+#define PCI_PCIDOORBELL_OFFSET      0x3C
+#define PCI_ATPDMA0_AHBADDR_OFFSET  0x40
+#define PCI_ATPDMA0_PCIADDR_OFFSET  0x44
+#define PCI_ATPDMA0_LENADDR_OFFSET  0x48
+#define PCI_ATPDMA1_AHBADDR_OFFSET  0x4C
+#define PCI_ATPDMA1_PCIADDR_OFFSET  0x50
+#define PCI_ATPDMA1_LENADDR_OFFSET	0x54
+
+/*
+ * PCI Control/Status Registers
+ */
+#define IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x)))
+
+#define PCI_NP_AD               IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET)
+#define PCI_NP_CBE              IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET)
+#define PCI_NP_WDATA            IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET)
+#define PCI_NP_RDATA            IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET)
+#define PCI_CRP_AD_CBE          IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
+#define PCI_CRP_WDATA           IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET)
+#define PCI_CRP_RDATA           IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET)
+#define PCI_CSR                 IXP4XX_PCI_CSR(PCI_CSR_OFFSET) 
+#define PCI_ISR                 IXP4XX_PCI_CSR(PCI_ISR_OFFSET)
+#define PCI_INTEN               IXP4XX_PCI_CSR(PCI_INTEN_OFFSET)
+#define PCI_DMACTRL             IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET)
+#define PCI_AHBMEMBASE          IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
+#define PCI_AHBIOBASE           IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET)
+#define PCI_PCIMEMBASE          IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
+#define PCI_AHBDOORBELL         IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
+#define PCI_PCIDOORBELL         IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
+#define PCI_ATPDMA0_AHBADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
+#define PCI_ATPDMA0_PCIADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
+#define PCI_ATPDMA0_LENADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
+#define PCI_ATPDMA1_AHBADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
+#define PCI_ATPDMA1_PCIADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
+#define PCI_ATPDMA1_LENADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
+
+/*
+ * PCI register values and bit definitions 
+ */
+
+/* CSR bit definitions */
+#define PCI_CSR_HOST    	0x00000001
+#define PCI_CSR_ARBEN   	0x00000002
+#define PCI_CSR_ADS     	0x00000004
+#define PCI_CSR_PDS     	0x00000008
+#define PCI_CSR_ABE     	0x00000010
+#define PCI_CSR_DBT     	0x00000020
+#define PCI_CSR_ASE     	0x00000100
+#define PCI_CSR_IC      	0x00008000
+
+/* ISR (Interrupt status) Register bit definitions */
+#define PCI_ISR_PSE     	0x00000001
+#define PCI_ISR_PFE     	0x00000002
+#define PCI_ISR_PPE     	0x00000004
+#define PCI_ISR_AHBE    	0x00000008
+#define PCI_ISR_APDC    	0x00000010
+#define PCI_ISR_PADC    	0x00000020
+#define PCI_ISR_ADB     	0x00000040
+#define PCI_ISR_PDB     	0x00000080
+
+/* INTEN (Interrupt Enable) Register bit definitions */
+#define PCI_INTEN_PSE   	0x00000001
+#define PCI_INTEN_PFE   	0x00000002
+#define PCI_INTEN_PPE   	0x00000004
+#define PCI_INTEN_AHBE  	0x00000008
+#define PCI_INTEN_APDC  	0x00000010
+#define PCI_INTEN_PADC  	0x00000020
+#define PCI_INTEN_ADB   	0x00000040
+#define PCI_INTEN_PDB   	0x00000080
+
+/*
+ * Shift value for byte enable on NP cmd/byte enable register
+ */
+#define IXP4XX_PCI_NP_CBE_BESL		4
+
+/*
+ * PCI commands supported by NP access unit
+ */
+#define NP_CMD_IOREAD			0x2
+#define NP_CMD_IOWRITE			0x3
+#define NP_CMD_CONFIGREAD		0xa
+#define NP_CMD_CONFIGWRITE		0xb
+#define NP_CMD_MEMREAD			0x6
+#define	NP_CMD_MEMWRITE			0x7
+
+/*
+ * Constants for CRP access into local config space
+ */
+#define CRP_AD_CBE_BESL         20
+#define CRP_AD_CBE_WRITE	0x00010000
+
+
+/*
+ * USB Device Controller
+ *
+ * These are used by the USB gadget driver, so they don't follow the
+ * IXP4XX_ naming convetions.
+ *
+ */
+# define IXP4XX_USB_REG(x)       (*((volatile u32 *)(x)))
+
+/* UDC Undocumented - Reserved1 */
+#define UDC_RES1	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0004)  
+/* UDC Undocumented - Reserved2 */
+#define UDC_RES2	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0008)  
+/* UDC Undocumented - Reserved3 */
+#define UDC_RES3	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x000C)  
+/* UDC Control Register */
+#define UDCCR		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000)  
+/* UDC Endpoint 0 Control/Status Register */
+#define UDCCS0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0010)  
+/* UDC Endpoint 1 (IN) Control/Status Register */
+#define UDCCS1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0014)  
+/* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0018)  
+/* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS3		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x001C)  
+/* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0020)  
+/* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS5		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0024)  
+/* UDC Endpoint 6 (IN) Control/Status Register */
+#define UDCCS6		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0028)  
+/* UDC Endpoint 7 (OUT) Control/Status Register */
+#define UDCCS7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x002C)  
+/* UDC Endpoint 8 (IN) Control/Status Register */
+#define UDCCS8		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0030)  
+/* UDC Endpoint 9 (OUT) Control/Status Register */
+#define UDCCS9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0034)  
+/* UDC Endpoint 10 (Interrupt) Control/Status Register */
+#define UDCCS10		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0038)  
+/* UDC Endpoint 11 (IN) Control/Status Register */
+#define UDCCS11		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x003C)  
+/* UDC Endpoint 12 (OUT) Control/Status Register */
+#define UDCCS12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0040)  
+/* UDC Endpoint 13 (IN) Control/Status Register */
+#define UDCCS13		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0044)  
+/* UDC Endpoint 14 (OUT) Control/Status Register */
+#define UDCCS14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0048)  
+/* UDC Endpoint 15 (Interrupt) Control/Status Register */
+#define UDCCS15		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x004C)  
+/* UDC Frame Number Register High */
+#define UFNRH		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0060)  
+/* UDC Frame Number Register Low */
+#define UFNRL		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0064)  
+/* UDC Byte Count Reg 2 */
+#define UBCR2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0068)  
+/* UDC Byte Count Reg 4 */
+#define UBCR4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x006c)  
+/* UDC Byte Count Reg 7 */
+#define UBCR7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0070)  
+/* UDC Byte Count Reg 9 */
+#define UBCR9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0074)  
+/* UDC Byte Count Reg 12 */
+#define UBCR12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0078)  
+/* UDC Byte Count Reg 14 */
+#define UBCR14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x007c)  
+/* UDC Endpoint 0 Data Register */
+#define UDDR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0080)  
+/* UDC Endpoint 1 Data Register */
+#define UDDR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0100)  
+/* UDC Endpoint 2 Data Register */
+#define UDDR2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0180)  
+/* UDC Endpoint 3 Data Register */
+#define UDDR3		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0200)  
+/* UDC Endpoint 4 Data Register */
+#define UDDR4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0400)  
+/* UDC Endpoint 5 Data Register */
+#define UDDR5		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00A0)  
+/* UDC Endpoint 6 Data Register */
+#define UDDR6		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0600)  
+/* UDC Endpoint 7 Data Register */
+#define UDDR7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0680)  
+/* UDC Endpoint 8 Data Register */
+#define UDDR8		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0700)  
+/* UDC Endpoint 9 Data Register */
+#define UDDR9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0900)  
+/* UDC Endpoint 10 Data Register */
+#define UDDR10		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00C0)  
+/* UDC Endpoint 11 Data Register */
+#define UDDR11		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B00)  
+/* UDC Endpoint 12 Data Register */
+#define UDDR12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B80)  
+/* UDC Endpoint 13 Data Register */
+#define UDDR13		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0C00)  
+/* UDC Endpoint 14 Data Register */
+#define UDDR14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0E00)  
+/* UDC Endpoint 15 Data Register */
+#define UDDR15		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00E0)  
+/* UDC Interrupt Control Register 0 */
+#define UICR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0050)  
+/* UDC Interrupt Control Register 1 */
+#define UICR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0054)  
+/* UDC Status Interrupt Register 0 */
+#define USIR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0058)  
+/* UDC Status Interrupt Register 1 */
+#define USIR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x005C)  
+
+#define UDCCR_UDE	(1 << 0)	/* UDC enable */
+#define UDCCR_UDA	(1 << 1)	/* UDC active */
+#define UDCCR_RSM	(1 << 2)	/* Device resume */
+#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
+#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
+#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
+#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
+#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
+
+#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
+#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
+#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
+#define UDCCS0_SST	(1 << 4)	/* Sent stall */
+#define UDCCS0_FST	(1 << 5)	/* Force stall */
+#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
+#define UDCCS0_SA	(1 << 7)	/* Setup active */
+
+#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
+
+#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_IO_ROF	(1 << 3)	/* Receive overflow */
+#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
+
+#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
+#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
+#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
+#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
+#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
+#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
+#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
+#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
+#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
+
+#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
+#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
+#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
+#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
+#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
+#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
+#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
+#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
+
+#define USIR0_IR0	(1 << 0)	/* Interrupt request ep 0 */
+#define USIR0_IR1	(1 << 1)	/* Interrupt request ep 1 */
+#define USIR0_IR2	(1 << 2)	/* Interrupt request ep 2 */
+#define USIR0_IR3	(1 << 3)	/* Interrupt request ep 3 */
+#define USIR0_IR4	(1 << 4)	/* Interrupt request ep 4 */
+#define USIR0_IR5	(1 << 5)	/* Interrupt request ep 5 */
+#define USIR0_IR6	(1 << 6)	/* Interrupt request ep 6 */
+#define USIR0_IR7	(1 << 7)	/* Interrupt request ep 7 */
+
+#define USIR1_IR8	(1 << 0)	/* Interrupt request ep 8 */
+#define USIR1_IR9	(1 << 1)	/* Interrupt request ep 9 */
+#define USIR1_IR10	(1 << 2)	/* Interrupt request ep 10 */
+#define USIR1_IR11	(1 << 3)	/* Interrupt request ep 11 */
+#define USIR1_IR12	(1 << 4)	/* Interrupt request ep 12 */
+#define USIR1_IR13	(1 << 5)	/* Interrupt request ep 13 */
+#define USIR1_IR14	(1 << 6)	/* Interrupt request ep 14 */
+#define USIR1_IR15	(1 << 7)	/* Interrupt request ep 15 */
+
+#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
+
+/* "fuse" bits of IXP_EXP_CFG2 */
+#define IXP4XX_FEATURE_RCOMP		(1 << 0)
+#define IXP4XX_FEATURE_USB_DEVICE	(1 << 1)
+#define IXP4XX_FEATURE_HASH		(1 << 2)
+#define IXP4XX_FEATURE_AES		(1 << 3)
+#define IXP4XX_FEATURE_DES		(1 << 4)
+#define IXP4XX_FEATURE_HDLC		(1 << 5)
+#define IXP4XX_FEATURE_AAL		(1 << 6)
+#define IXP4XX_FEATURE_HSS		(1 << 7)
+#define IXP4XX_FEATURE_UTOPIA		(1 << 8)
+#define IXP4XX_FEATURE_NPEB_ETH0	(1 << 9)
+#define IXP4XX_FEATURE_NPEC_ETH		(1 << 10)
+#define IXP4XX_FEATURE_RESET_NPEA	(1 << 11)
+#define IXP4XX_FEATURE_RESET_NPEB	(1 << 12)
+#define IXP4XX_FEATURE_RESET_NPEC	(1 << 13)
+#define IXP4XX_FEATURE_PCI		(1 << 14)
+#define IXP4XX_FEATURE_ECC_TIMESYNC	(1 << 15)
+#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT	(3 << 16)
+#define IXP4XX_FEATURE_USB_HOST		(1 << 18)
+#define IXP4XX_FEATURE_NPEA_ETH		(1 << 19)
+#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3	(1 << 20)
+#define IXP4XX_FEATURE_RSA		(1 << 21)
+#define IXP4XX_FEATURE_XSCALE_MAX_FREQ	(3 << 22)
+#define IXP4XX_FEATURE_RESERVED		(0xFF << 24)
+
+#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC |	\
+				    IXP4XX_FEATURE_USB_HOST |		\
+				    IXP4XX_FEATURE_NPEA_ETH |		\
+				    IXP4XX_FEATURE_NPEB_ETH_1_TO_3 |	\
+				    IXP4XX_FEATURE_RSA |		\
+				    IXP4XX_FEATURE_XSCALE_MAX_FREQ)
+
+#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h
new file mode 100644
index 0000000..c4d2830
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/memory.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/memory.h
+ *
+ * Copyright (c) 2001-2004 MontaVista Software, Inc.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+
+#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
+
+void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
+
+#define arch_adjust_zones(node, size, holes) \
+	ixp4xx_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD (SZ_64M - 1)
+
+#endif
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ *
+ * These are dummies for now.
+ */
+#define __virt_to_bus(x)	 __virt_to_phys(x)
+#define __bus_to_virt(x)	 __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/nas100d.h b/arch/arm/mach-ixp4xx/include/mach/nas100d.h
new file mode 100644
index 0000000..3771d62
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/nas100d.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/nas100d.h
+ *
+ * NAS100D platform specific definitions
+ *
+ * Copyright (c) 2005 Tower Technologies
+ *
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * based on ixdp425.h:
+ *	Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define NAS100D_SDA_PIN		5
+#define NAS100D_SCL_PIN		6
+
+/*
+ * NAS100D PCI IRQs
+ */
+#define NAS100D_PCI_MAX_DEV	3
+#define NAS100D_PCI_IRQ_LINES	3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define NAS100D_PCI_INTA_PIN	11
+#define NAS100D_PCI_INTB_PIN	10
+#define NAS100D_PCI_INTC_PIN	9
+#define NAS100D_PCI_INTD_PIN	8
+#define NAS100D_PCI_INTE_PIN	7
+
+/* Buttons */
+
+#define NAS100D_PB_GPIO         14   /* power button */
+#define NAS100D_RB_GPIO         4    /* reset button */
+
+/* Power control */
+
+#define NAS100D_PO_GPIO         12   /* power off */
+
+/* LEDs */
+
+#define NAS100D_LED_WLAN_GPIO	0
+#define NAS100D_LED_DISK_GPIO	3
+#define NAS100D_LED_PWR_GPIO	15
diff --git a/include/asm-arm/arch-ixp4xx/npe.h b/arch/arm/mach-ixp4xx/include/mach/npe.h
similarity index 100%
rename from include/asm-arm/arch-ixp4xx/npe.h
rename to arch/arm/mach-ixp4xx/include/mach/npe.h
diff --git a/arch/arm/mach-ixp4xx/include/mach/nslu2.h b/arch/arm/mach-ixp4xx/include/mach/nslu2.h
new file mode 100644
index 0000000..85d00ad
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/nslu2.h
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/nslu2.h
+ *
+ * NSLU2 platform specific definitions
+ *
+ * Author: Mark Rakes <mrakes AT mac.com>
+ * Maintainers: http://www.nslu2-linux.org
+ *
+ * based on ixdp425.h:
+ *	Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define NSLU2_SDA_PIN		7
+#define NSLU2_SCL_PIN		6
+
+/*
+ * NSLU2 PCI IRQs
+ */
+#define NSLU2_PCI_MAX_DEV	3
+#define NSLU2_PCI_IRQ_LINES	3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define NSLU2_PCI_INTA_PIN	11
+#define NSLU2_PCI_INTB_PIN	10
+#define NSLU2_PCI_INTC_PIN	9
+#define NSLU2_PCI_INTD_PIN	8
+
+/* NSLU2 Timer */
+#define NSLU2_FREQ 66000000
+
+/* Buttons */
+
+#define NSLU2_PB_GPIO		5	/* power button */
+#define NSLU2_PO_GPIO		8	/* power off */
+#define NSLU2_RB_GPIO		12	/* reset button */
+
+/* Buzzer */
+
+#define NSLU2_GPIO_BUZZ		4
+
+/* LEDs */
+
+#define NSLU2_LED_RED_GPIO	0
+#define NSLU2_LED_GRN_GPIO	1
+#define NSLU2_LED_DISK1_GPIO	3
+#define NSLU2_LED_DISK2_GPIO	2
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
new file mode 100644
index 0000000..e824c02
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/platform.h
+ *
+ * Constants and functions that are useful to IXP4xx platform-specific code
+ * and device drivers.
+ *
+ * Copyright (C) 2004 MontaVista Software, Inc.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+#ifndef	__ARMEB__
+#define	REG_OFFSET	0
+#else
+#define	REG_OFFSET	3
+#endif
+
+/*
+ * Expansion bus memory regions
+ */
+#define IXP4XX_EXP_BUS_BASE_PHYS	(0x50000000)
+
+/*
+ * The expansion bus on the IXP4xx can be configured for either 16 or
+ * 32MB windows and the CS offset for each region changes based on the
+ * current configuration. This means that we cannot simply hardcode
+ * each offset. ixp4xx_sys_init() looks at the expansion bus configuration
+ * as setup by the bootloader to determine our window size.
+ */
+extern unsigned long ixp4xx_exp_bus_size;
+
+#define	IXP4XX_EXP_BUS_BASE(region)\
+		(IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
+
+#define IXP4XX_EXP_BUS_END(region)\
+		(IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1)
+
+/* Those macros can be used to adjust timing and configure
+ * other features for each region.
+ */
+
+#define IXP4XX_EXP_BUS_RECOVERY_T(x)	(((x) & 0x0f) << 16)
+#define IXP4XX_EXP_BUS_HOLD_T(x)	(((x) & 0x03) << 20)
+#define IXP4XX_EXP_BUS_STROBE_T(x)	(((x) & 0x0f) << 22)
+#define IXP4XX_EXP_BUS_SETUP_T(x)	(((x) & 0x03) << 26)
+#define IXP4XX_EXP_BUS_ADDR_T(x)	(((x) & 0x03) << 28)
+#define IXP4XX_EXP_BUS_SIZE(x)		(((x) & 0x0f) << 10)
+#define IXP4XX_EXP_BUS_CYCLES(x)	(((x) & 0x03) << 14)
+
+#define IXP4XX_EXP_BUS_CS_EN		(1L << 31)
+#define IXP4XX_EXP_BUS_BYTE_RD16	(1L << 6)
+#define IXP4XX_EXP_BUS_HRDY_POL		(1L << 5)
+#define IXP4XX_EXP_BUS_MUX_EN		(1L << 4)
+#define IXP4XX_EXP_BUS_SPLT_EN		(1L << 3)
+#define IXP4XX_EXP_BUS_WR_EN		(1L << 1)
+#define IXP4XX_EXP_BUS_BYTE_EN		(1L << 0)
+
+#define IXP4XX_EXP_BUS_CYCLES_INTEL	0x00
+#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA	0x01
+#define IXP4XX_EXP_BUS_CYCLES_HPI	0x02
+
+#define IXP4XX_FLASH_WRITABLE	(0x2)
+#define IXP4XX_FLASH_DEFAULT	(0xbcd23c40)
+#define IXP4XX_FLASH_WRITE	(0xbcd23c42)
+
+/*
+ * Clock Speed Definitions.
+ */
+#define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) /* 66Mhzi APB BUS   */ 
+#define IXP4XX_UART_XTAL        	14745600
+
+/*
+ * This structure provide a means for the board setup code
+ * to give information to th pata_ixp4xx driver. It is
+ * passed as platform_data.
+ */
+struct ixp4xx_pata_data {
+	volatile u32	*cs0_cfg;
+	volatile u32	*cs1_cfg;
+	unsigned long	cs0_bits;
+	unsigned long	cs1_bits;
+	void __iomem	*cs0;
+	void __iomem	*cs1;
+};
+
+struct sys_timer;
+
+#define IXP4XX_ETH_NPEA		0x00
+#define IXP4XX_ETH_NPEB		0x10
+#define IXP4XX_ETH_NPEC		0x20
+
+/* Information about built-in Ethernet MAC interfaces */
+struct eth_plat_info {
+	u8 phy;		/* MII PHY ID, 0 - 31 */
+	u8 rxq;		/* configurable, currently 0 - 31 only */
+	u8 txreadyq;
+	u8 hwaddr[6];
+};
+
+/* Information about built-in HSS (synchronous serial) interfaces */
+struct hss_plat_info {
+	int (*set_clock)(int port, unsigned int clock_type);
+	int (*open)(int port, void *pdev,
+		    void (*set_carrier_cb)(void *pdev, int carrier));
+	void (*close)(int port, void *pdev);
+	u8 txreadyq;
+};
+
+/*
+ * Frequency of clock used for primary clocksource
+ */
+extern unsigned long ixp4xx_timer_freq;
+
+/*
+ * Functions used by platform-level setup code
+ */
+extern void ixp4xx_map_io(void);
+extern void ixp4xx_init_irq(void);
+extern void ixp4xx_sys_init(void);
+extern void ixp4xx_timer_init(void);
+extern struct sys_timer ixp4xx_timer;
+extern void ixp4xx_pci_preinit(void);
+struct pci_sys_data;
+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
+
+/*
+ * GPIO-functions
+ */
+/*
+ * The following converted to the real HW bits the gpio_line_config
+ */
+/* GPIO pin types */
+#define IXP4XX_GPIO_OUT 		0x1
+#define IXP4XX_GPIO_IN  		0x2
+
+/* GPIO signal types */
+#define IXP4XX_GPIO_LOW			0
+#define IXP4XX_GPIO_HIGH		1
+
+/* GPIO Clocks */
+#define IXP4XX_GPIO_CLK_0		14
+#define IXP4XX_GPIO_CLK_1		15
+
+static inline void gpio_line_config(u8 line, u32 direction)
+{
+	if (direction == IXP4XX_GPIO_IN)
+		*IXP4XX_GPIO_GPOER |= (1 << line);
+	else
+		*IXP4XX_GPIO_GPOER &= ~(1 << line);
+}
+
+static inline void gpio_line_get(u8 line, int *value)
+{
+	*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
+}
+
+static inline void gpio_line_set(u8 line, int value)
+{
+	if (value == IXP4XX_GPIO_HIGH)
+	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
+	else if (value == IXP4XX_GPIO_LOW)
+	    *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
+}
+
+#endif // __ASSEMBLY__
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/prpmc1100.h b/arch/arm/mach-ixp4xx/include/mach/prpmc1100.h
new file mode 100644
index 0000000..17274a2
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/prpmc1100.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/prpmc1100.h
+ *
+ * Motorolla PrPMC1100 platform specific definitions
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc. 
+ * 
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define	PRPMC1100_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
+#define	PRPMC1100_FLASH_SIZE	IXP4XX_EXP_BUS_CSX_REGION_SIZE
+
+#define	PRPMC1100_PCI_MIN_DEVID	10
+#define	PRPMC1100_PCI_MAX_DEVID	16
+#define	PRPMC1100_PCI_IRQ_LINES	4
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define PRPMC1100_PCI_INTA_PIN	11
+#define PRPMC1100_PCI_INTB_PIN	10
+#define	PRPMC1100_PCI_INTC_PIN	9
+#define	PRPMC1100_PCI_INTD_PIN	8
+
+
diff --git a/include/asm-arm/arch-ixp4xx/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
similarity index 100%
rename from include/asm-arm/arch-ixp4xx/qmgr.h
rename to arch/arm/mach-ixp4xx/include/mach/qmgr.h
diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h
new file mode 100644
index 0000000..92a7e8d
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/system.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/system.h
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+#if 0
+	if (!hlt_counter)
+		cpu_do_idle(0);
+#endif
+}
+
+
+static inline void arch_reset(char mode)
+{
+	if ( 1 && mode == 's') {
+		/* Jump into ROM at address 0 */
+		cpu_reset(0);
+	} else {
+		/* Use on-chip reset capability */
+
+		/* set the "key" register to enable access to
+		 * "timer" and "enable" registers
+		 */
+		*IXP4XX_OSWK = IXP4XX_WDT_KEY;
+
+		/* write 0 to the timer register for an immediate reset */
+		*IXP4XX_OSWT = 0;
+
+		*IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
+	}
+}
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h
new file mode 100644
index 0000000..89ce3ee
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/timex.h
@@ -0,0 +1,15 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/timex.h
+ * 
+ */
+
+#include <mach/hardware.h>
+
+/*
+ * We use IXP425 General purpose timer for our timer needs, it runs at 
+ * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
+ * timer register ignores the bottom 2 bits of the LATCH value.
+ */
+#define FREQ 66666666
+#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/udc.h b/arch/arm/mach-ixp4xx/include/mach/udc.h
new file mode 100644
index 0000000..80d6da2
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/udc.h
@@ -0,0 +1,8 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/udc.h
+ *
+ */
+#include <asm/mach/udc_pxa2xx.h>
+
+extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info);
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
new file mode 100644
index 0000000..2db0078
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/uncompress.h 
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ARCH_UNCOMPRESS_H_
+#define _ARCH_UNCOMPRESS_H_
+
+#include "ixp4xx-regs.h"
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+
+#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
+
+static volatile u32* uart_base;
+
+static inline void putc(int c)
+{
+	/* Check THRE and TEMT bits before we transmit the character.
+	 */
+	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+		barrier();
+
+	*uart_base = c;
+}
+
+static void flush(void)
+{
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+	/*
+	 * Some boards are using UART2 as console
+	 */
+	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
+			 machine_is_gateway7001() || machine_is_wg302v2())
+		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+	else
+		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
+}
+
+/*
+ * arch_id is a variable in decompress_kernel()
+ */
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
+
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/vmalloc.h b/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
new file mode 100644
index 0000000..7b3580b
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/vmalloc.h
+ */
+#define VMALLOC_END       (0xFF000000)
+
diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c
index 9ec9571..64c29aa 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -22,7 +22,7 @@
 
 #include <asm/mach/pci.h>
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 void __init ixdp425_pci_preinit(void)
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 8666a42..9b2d2ec 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -24,7 +24,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
index fac9e5c..4ed7ac6 100644
--- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
@@ -19,7 +19,7 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/pci.h>
 
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index 63a23fa..c73a94d 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -21,7 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <asm/arch/npe.h>
+#include <mach/npe.h>
 
 #define DEBUG_MSG			0
 #define DEBUG_FW			0
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
index fab94ea..c6cb069 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
@@ -12,7 +12,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <asm/arch/qmgr.h>
+#include <mach/qmgr.h>
 
 #define DEBUG		0
 
diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c
index 0fd513a..9b59ed0 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-pci.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c
@@ -23,7 +23,7 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/pci.h>
 
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index c426dcb..7ea7820 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -23,7 +23,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index 8a7ebe9..c79f492 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/mbus.h>
 #include <linux/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include "common.h"
 
 /*
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 5938a3b..0e509b8 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -19,7 +19,7 @@
 #include <asm/timex.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/arch/kirkwood.h>
+#include <mach/kirkwood.h>
 #include <asm/plat-orion/cache-feroceon-l2.h>
 #include <asm/plat-orion/ehci-orion.h>
 #include <asm/plat-orion/orion_nand.h>
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index d5c482c..610fb24 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -21,7 +21,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/kirkwood.h>
+#include <mach/kirkwood.h>
 #include "common.h"
 
 static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
new file mode 100644
index 0000000..c0cc5b5
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/kirkwood.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =KIRKWOOD_REGS_PHYS_BASE
+	ldrne	\rx, =KIRKWOOD_REGS_VIRT_BASE
+	orr	\rx, \rx, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-kirkwood/dma.h b/arch/arm/mach-kirkwood/include/mach/dma.h
similarity index 100%
rename from include/asm-arm/arch-kirkwood/dma.h
rename to arch/arm/mach-kirkwood/include/mach/dma.h
diff --git a/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
new file mode 100644
index 0000000..83e0cba
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Kirkwood platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/kirkwood.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =IRQ_VIRT_BASE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	@ check low interrupts
+	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
+	mov	\irqnr, #31
+	ands	\irqstat, \irqstat, \tmp
+	bne	1001f
+
+	@ if no low interrupts set, check high interrupts
+	ldr	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
+	mov	\irqnr, #63
+	ands	\irqstat, \irqstat, \tmp
+
+	@ find first active interrupt source
+1001:	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-kirkwood/include/mach/hardware.h b/arch/arm/mach-kirkwood/include/mach/hardware.h
new file mode 100644
index 0000000..cde8528
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "kirkwood.h"
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO			0x00001000
+#define PCIBIOS_MIN_MEM			0x01000000
+#define PCIMEM_BASE			KIRKWOOD_PCIE_MEM_PHYS_BASE /* mem base for VGA */
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h
new file mode 100644
index 0000000..be07be0
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/io.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "kirkwood.h"
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE)
+					+ KIRKWOOD_PCIE_IO_VIRT_BASE);
+}
+
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h
new file mode 100644
index 0000000..6fd0583
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/irqs.h
@@ -0,0 +1,63 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "kirkwood.h"	/* need GPIO_MAX */
+
+/*
+ * Low Interrupt Controller
+ */
+#define IRQ_KIRKWOOD_HIGH_SUM	0
+#define IRQ_KIRKWOOD_BRIDGE	1
+#define IRQ_KIRKWOOD_HOST2CPU	2
+#define IRQ_KIRKWOOD_CPU2HOST	3
+#define IRQ_KIRKWOOD_XOR_00	5
+#define IRQ_KIRKWOOD_XOR_01	6
+#define IRQ_KIRKWOOD_XOR_10	7
+#define IRQ_KIRKWOOD_XOR_11	8
+#define IRQ_KIRKWOOD_PCIE	9
+#define IRQ_KIRKWOOD_GE00_SUM	11
+#define IRQ_KIRKWOOD_GE01_SUM	15
+#define IRQ_KIRKWOOD_USB	19
+#define IRQ_KIRKWOOD_SATA	21
+#define IRQ_KIRKWOOD_CRYPTO	22
+#define IRQ_KIRKWOOD_SPI	23
+#define IRQ_KIRKWOOD_I2S	24
+#define IRQ_KIRKWOOD_TS_0	26
+#define IRQ_KIRKWOOD_SDIO	28
+#define IRQ_KIRKWOOD_TWSI	29
+#define IRQ_KIRKWOOD_AVB	30
+#define IRQ_KIRKWOOD_TDMI	31
+
+/*
+ * High Interrupt Controller
+ */
+#define IRQ_KIRKWOOD_UART_0	33
+#define IRQ_KIRKWOOD_UART_1	34
+#define IRQ_KIRKWOOD_GPIO_LOW_0_7	35
+#define IRQ_KIRKWOOD_GPIO_LOW_8_15	36
+#define IRQ_KIRKWOOD_GPIO_LOW_16_23	37
+#define IRQ_KIRKWOOD_GPIO_LOW_24_31	38
+#define IRQ_KIRKWOOD_GPIO_HIGH_0_7	39
+#define IRQ_KIRKWOOD_GPIO_HIGH_8_15	40
+#define IRQ_KIRKWOOD_GPIO_HIGH_16_23	41
+
+/*
+ * KIRKWOOD General Purpose Pins
+ */
+#define IRQ_KIRKWOOD_GPIO_START	64
+#define NR_GPIO_IRQS		GPIO_MAX
+
+#define NR_IRQS			(IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
new file mode 100644
index 0000000..d1336b4
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -0,0 +1,100 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/kirkwood.h
+ *
+ * Generic definitions for Marvell Kirkwood SoC flavors:
+ *  88F6180, 88F6192 and 88F6281.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_KIRKWOOD_H
+#define __ASM_ARCH_KIRKWOOD_H
+
+/*
+ * Marvell Kirkwood address maps.
+ *
+ * phys
+ * e0000000	PCIe Memory space
+ * f1000000	on-chip peripheral registers
+ * f2000000	PCIe I/O space
+ * f3000000	NAND controller address window
+ *
+ * virt		phys		size
+ * fee00000	f1000000	1M	on-chip peripheral registers
+ * fef00000	f2000000	1M	PCIe I/O space
+ */
+
+#define KIRKWOOD_NAND_MEM_PHYS_BASE	0xf3000000
+#define KIRKWOOD_NAND_MEM_SIZE		SZ_64K /* 1K is sufficient, but 64K
+						* is the minimal window size
+						*/
+
+#define KIRKWOOD_PCIE_IO_PHYS_BASE	0xf2000000
+#define KIRKWOOD_PCIE_IO_VIRT_BASE	0xfef00000
+#define KIRKWOOD_PCIE_IO_BUS_BASE	0x00000000
+#define KIRKWOOD_PCIE_IO_SIZE		SZ_1M
+
+#define KIRKWOOD_REGS_PHYS_BASE		0xf1000000
+#define KIRKWOOD_REGS_VIRT_BASE		0xfee00000
+#define KIRKWOOD_REGS_SIZE		SZ_1M
+
+#define KIRKWOOD_PCIE_MEM_PHYS_BASE	0xe0000000
+#define KIRKWOOD_PCIE_MEM_SIZE		SZ_128M
+
+/*
+ * MBUS bridge registers.
+ */
+#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+#define  CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define   CPU_RESET		0x00000002
+#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define   SOFT_RESET_OUT_EN	0x00000004
+#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define   SOFT_RESET		0x00000001
+#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define   BRIDGE_INT_TIMER0	0x0002
+#define   BRIDGE_INT_TIMER1	0x0004
+#define   BRIDGE_INT_TIMER1_CLR	(~0x0004)
+#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define   IRQ_CAUSE_LOW_OFF	0x0000
+#define   IRQ_MASK_LOW_OFF	0x0004
+#define   IRQ_CAUSE_HIGH_OFF	0x0010
+#define   IRQ_MASK_HIGH_OFF	0x0014
+#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
+#define  L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
+#define   L2_WRITETHROUGH	0x00000010
+
+/*
+ * Register Map
+ */
+#define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x00000)
+#define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE | 0x1500)
+
+#define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x10000)
+#define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x10000)
+#define  SAMPLE_AT_RESET	(DEV_BUS_VIRT_BASE | 0x0030)
+#define  DEVICE_ID		(DEV_BUS_VIRT_BASE | 0x0034)
+#define  RTC_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0300)
+#define  SPI_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0600)
+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
+
+#define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
+
+#define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
+
+#define GE00_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x70000)
+#define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x74000)
+
+#define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x80000)
+
+
+#define GPIO_MAX		50
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/memory.h b/arch/arm/mach-kirkwood/include/mach/memory.h
new file mode 100644
index 0000000..b5fb34b
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x00000000)
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h
new file mode 100644
index 0000000..8510f6c
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/system.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/kirkwood.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/timex.h b/arch/arm/mach-kirkwood/include/mach/timex.h
new file mode 100644
index 0000000..f77ef4a
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/timex.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)
+
+#define KIRKWOOD_TCLK		166666667
diff --git a/arch/arm/mach-kirkwood/include/mach/uncompress.h b/arch/arm/mach-kirkwood/include/mach/uncompress.h
new file mode 100644
index 0000000..75d5497
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/kirkwood.h>
+
+#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+	unsigned char *base = SERIAL_BASE;
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		if (base[UART_LSR << 2] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+	unsigned char *base = SERIAL_BASE;
+	unsigned char mask;
+	int i;
+
+	mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+	for (i = 0; i < 0x1000; i++) {
+		if ((base[UART_LSR << 2] & mask) == mask)
+			break;
+		barrier();
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-kirkwood/include/mach/vmalloc.h b/arch/arm/mach-kirkwood/include/mach/vmalloc.h
new file mode 100644
index 0000000..8f48260
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe800000
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 6cf642c5..182230a 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -21,7 +21,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/kirkwood.h>
+#include <mach/kirkwood.h>
 #include "common.h"
 
 #define RD88F6192_GPIO_USB_VBUS		10
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index b6437f4..d8a43018c 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -22,7 +22,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/kirkwood.h>
+#include <mach/kirkwood.h>
 #include <asm/plat-orion/orion_nand.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 05ac2bd..0468e93 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -18,7 +18,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/devices.h>
+#include <mach/devices.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-ks8695/cpu.c b/arch/arm/mach-ks8695/cpu.c
index 97ab618..c6c08e8 100644
--- a/arch/arm/mach-ks8695/cpu.c
+++ b/arch/arm/mach-ks8695/cpu.c
@@ -25,13 +25,13 @@
 #include <linux/module.h>
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/regs-sys.h>
-#include <asm/arch/regs-misc.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-misc.h>
 
 
 static struct __initdata map_desc ks8695_io_desc[] = {
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
index 3db2ec6..4bd2514 100644
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
@@ -22,9 +22,9 @@
 
 #include <linux/platform_device.h>
 
-#include <asm/arch/regs-wan.h>
-#include <asm/arch/regs-lan.h>
-#include <asm/arch/regs-hpna.h>
+#include <mach/regs-wan.h>
+#include <mach/regs-lan.h>
+#include <mach/regs-hpna.h>
 
 
 /* --------------------------------------------------------------------
diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c
index a1e4643..3624e65 100644
--- a/arch/arm/mach-ks8695/gpio.c
+++ b/arch/arm/mach-ks8695/gpio.c
@@ -25,11 +25,11 @@
 #include <linux/module.h>
 
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio.h>
 
 /*
  * Configure a GPIO line for either GPIO function, or its internal
diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
new file mode 100644
index 0000000..3782c35
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/debug-macro.S
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Debug macros
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <mach/regs-uart.h>
+
+	.macro	addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1				@ MMU enabled?
+		ldreq	\rx, =KS8695_UART_PA		@ physical base address
+		ldrne	\rx, =KS8695_UART_VA		@ virtual base address
+	.endm
+
+	.macro	senduart, rd, rx
+		str	\rd, [\rx, #KS8695_URTH]	@ Write to Transmit Holding Register
+	.endm
+
+	.macro	busyuart, rd, rx
+1001:		ldr	\rd, [\rx, #KS8695_URLS]	@ Read Line Status Register
+		tst	\rd, #URLS_URTE			@ Holding & Shift registers empty?
+		beq	1001b
+	.endm
+
+	.macro	waituart, rd, rx
+1001:		ldr	\rd, [\rx, #KS8695_URLS]	@ Read Line Status Register
+		tst	\rd, #URLS_URTHRE		@ Holding Register empty?
+		beq	1001b
+	.endm
diff --git a/arch/arm/mach-ks8695/include/mach/devices.h b/arch/arm/mach-ks8695/include/mach/devices.h
new file mode 100644
index 0000000..2744fec
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/devices.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/devices.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_DEVICES_H
+#define __ASM_ARCH_DEVICES_H
+
+#include <linux/pci.h>
+
+ /* Ethernet */
+extern void __init ks8695_add_device_wan(void);
+extern void __init ks8695_add_device_lan(void);
+extern void __init ks8695_add_device_hpna(void);
+
+ /* LEDs */
+extern short ks8695_leds_cpu;
+extern short ks8695_leds_timer;
+extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
+
+ /* PCI */
+#define KS8695_MODE_PCI		0
+#define KS8695_MODE_MINIPCI	1
+#define KS8695_MODE_CARDBUS	2
+
+struct ks8695_pci_cfg {
+	short mode;
+	int (*map_irq)(struct pci_dev *, u8, u8);
+};
+extern __init void ks8695_init_pci(struct ks8695_pci_cfg *);
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/dma.h b/arch/arm/mach-ks8695/include/mach/dma.h
new file mode 100644
index 0000000..5612062
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/dma.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/dma.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-ks8695/include/mach/entry-macro.S b/arch/arm/mach-ks8695/include/mach/entry-macro.S
new file mode 100644
index 0000000..b4fe0c1
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/entry-macro.S
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/entry-macro.S
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * Low-level IRQ helper macros for KS8695
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =KS8695_IRQ_VA			@ Base address of interrupt controller
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, [\base, #KS8695_INTMS]	@ Mask Status register
+
+		teq	\irqstat, #0
+		beq	1001f
+
+		mov	\irqnr, #0
+
+		tst	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tsteq	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tsteq	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tst	\irqstat, #0x0f
+		moveq	\irqstat, \irqstat, lsr #4
+		addeq	\irqnr, \irqnr, #4
+		tst	\irqstat, #0x03
+		moveq	\irqstat, \irqstat, lsr #2
+		addeq	\irqnr, \irqnr, #2
+		tst	\irqstat, #0x01
+		addeqs	\irqnr, \irqnr, #1
+1001:
+	.endm
diff --git a/arch/arm/mach-ks8695/include/mach/gpio.h b/arch/arm/mach-ks8695/include/mach/gpio.h
new file mode 100644
index 0000000..73c8416
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/gpio.h
@@ -0,0 +1,79 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/gpio.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H_
+#define __ASM_ARCH_GPIO_H_
+
+#define KS8695_GPIO_0		0
+#define KS8695_GPIO_1		1
+#define KS8695_GPIO_2		2
+#define KS8695_GPIO_3		3
+#define KS8695_GPIO_4		4
+#define KS8695_GPIO_5		5
+#define KS8695_GPIO_6		6
+#define KS8695_GPIO_7		7
+#define KS8695_GPIO_8		8
+#define KS8695_GPIO_9		9
+#define KS8695_GPIO_10		10
+#define KS8695_GPIO_11		11
+#define KS8695_GPIO_12		12
+#define KS8695_GPIO_13		13
+#define KS8695_GPIO_14		14
+#define KS8695_GPIO_15		15
+
+
+/*
+ * Configure GPIO pin as external interrupt source.
+ */
+int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
+
+/*
+ * Configure the GPIO line as an input.
+ */
+int __init_or_module gpio_direction_input(unsigned int pin);
+
+/*
+ * Configure the GPIO line as an output, with default state.
+ */
+int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state);
+
+/*
+ * Set the state of an output GPIO line.
+ */
+void gpio_set_value(unsigned int pin, unsigned int state);
+
+/*
+ * Read the state of a GPIO line.
+ */
+int gpio_get_value(unsigned int pin);
+
+/*
+ * Map GPIO line to IRQ number.
+ */
+int gpio_to_irq(unsigned int pin);
+
+/*
+ * Map IRQ number to GPIO line.
+ */
+int irq_to_gpio(unsigned int irq);
+
+
+#include <asm-generic/gpio.h>
+
+static inline int gpio_request(unsigned int pin, const char *label)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned int pin)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h
new file mode 100644
index 0000000..1d640d0
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/hardware.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/hardware.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Memory Map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical RAM address.
+ */
+#define KS8695_SDRAM_PA		0x00000000
+
+
+/*
+ * We map an entire MiB with the System Configuration Registers in even
+ * though only 64KiB is needed. This makes it easier for use with the
+ * head debug code as the initial MMU setup only deals in L1 sections.
+ */
+#define KS8695_IO_PA		0x03F00000
+#define KS8695_IO_VA		0xF0000000
+#define KS8695_IO_SIZE		SZ_1M
+
+#define KS8695_PCIMEM_PA	0x60000000
+#define KS8695_PCIMEM_SIZE	SZ_512M
+
+#define KS8695_PCIIO_PA		0x80000000
+#define KS8695_PCIIO_SIZE	SZ_64K
+
+
+/*
+ * PCI support
+ */
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO		0
+#define PCIBIOS_MIN_MEM		0
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/io.h b/arch/arm/mach-ks8695/include/mach/io.h
new file mode 100644
index 0000000..f364f24
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/io.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/io.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/irqs.h b/arch/arm/mach-ks8695/include/mach/irqs.h
new file mode 100644
index 0000000..86fc9e6
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/irqs.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/irqs.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+
+#define NR_IRQS				32
+
+/*
+ * IRQ definitions
+ */
+#define KS8695_IRQ_COMM_RX		0
+#define KS8695_IRQ_COMM_TX		1
+#define KS8695_IRQ_EXTERN0		2
+#define KS8695_IRQ_EXTERN1		3
+#define KS8695_IRQ_EXTERN2		4
+#define KS8695_IRQ_EXTERN3		5
+#define KS8695_IRQ_TIMER0		6
+#define KS8695_IRQ_TIMER1		7
+#define KS8695_IRQ_UART_TX		8
+#define KS8695_IRQ_UART_RX		9
+#define KS8695_IRQ_UART_LINE_STATUS	10
+#define KS8695_IRQ_UART_MODEM_STATUS	11
+#define KS8695_IRQ_LAN_RX_STOP		12
+#define KS8695_IRQ_LAN_TX_STOP		13
+#define KS8695_IRQ_LAN_RX_BUF		14
+#define KS8695_IRQ_LAN_TX_BUF		15
+#define KS8695_IRQ_LAN_RX_STATUS	16
+#define KS8695_IRQ_LAN_TX_STATUS	17
+#define KS8695_IRQ_HPNA_RX_STOP		18
+#define KS8695_IRQ_HPNA_TX_STOP		19
+#define KS8695_IRQ_HPNA_RX_BUF		20
+#define KS8695_IRQ_HPNA_TX_BUF		21
+#define KS8695_IRQ_HPNA_RX_STATUS	22
+#define KS8695_IRQ_HPNA_TX_STATUS	23
+#define KS8695_IRQ_BUS_ERROR		24
+#define KS8695_IRQ_WAN_RX_STOP		25
+#define KS8695_IRQ_WAN_TX_STOP		26
+#define KS8695_IRQ_WAN_RX_BUF		27
+#define KS8695_IRQ_WAN_TX_BUF		28
+#define KS8695_IRQ_WAN_RX_STATUS	29
+#define KS8695_IRQ_WAN_TX_STATUS	30
+#define KS8695_IRQ_WAN_LINK		31
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
new file mode 100644
index 0000000..dadbe66
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/memory.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 Memory definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical SRAM offset.
+ */
+#define PHYS_OFFSET		KS8695_SDRAM_PA
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_PCI
+
+/* PCI mappings */
+#define __virt_to_bus(x)	((x) - PAGE_OFFSET + KS8695_PCIMEM_PA)
+#define __bus_to_virt(x)	((x) - KS8695_PCIMEM_PA + PAGE_OFFSET)
+
+/* Platform-bus mapping */
+extern struct bus_type platform_bus_type;
+#define is_lbus_device(dev)		(dev && dev->bus == &platform_bus_type)
+#define __arch_dma_to_virt(dev, x)	({ is_lbus_device(dev) ? \
+					__phys_to_virt(x) : __bus_to_virt(x); })
+#define __arch_virt_to_dma(dev, x)	({ is_lbus_device(dev) ? \
+					(dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
+#define __arch_page_to_dma(dev, x)	__arch_virt_to_dma(dev, page_address(x))
+
+#else
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+#endif
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-gpio.h b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
new file mode 100644
index 0000000..0df6fe6
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-gpio.h
+ *
+ * Copyright (C) 2007 Andrew Victor
+ *
+ * KS8695 - GPIO control registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_GPIO_H
+#define KS8695_GPIO_H
+
+#define KS8695_GPIO_OFFSET	(0xF0000 + 0xE600)
+#define KS8695_GPIO_VA		(KS8695_IO_VA + KS8695_GPIO_OFFSET)
+#define KS8695_GPIO_PA		(KS8695_IO_PA + KS8695_GPIO_OFFSET)
+
+
+#define KS8695_IOPM		(0x00)		/* I/O Port Mode Register */
+#define KS8695_IOPC		(0x04)		/* I/O Port Control Register */
+#define KS8695_IOPD		(0x08)		/* I/O Port Data Register */
+
+
+/* Port Mode Register */
+#define IOPM_(x)		(1 << (x))	/* Mode for GPIO Pin x */
+
+/* Port Control Register */
+#define IOPC_IOTIM1EN		(1 << 17)	/* GPIO Pin for Timer1 Enable */
+#define IOPC_IOTIM0EN		(1 << 16)	/* GPIO Pin for Timer0 Enable */
+#define IOPC_IOEINT3EN		(1 << 15)	/* GPIO Pin for External/Soft Interrupt 3 Enable */
+#define IOPC_IOEINT3TM		(7 << 12)	/* GPIO Pin for External/Soft Interrupt 3 Trigger Mode */
+#define IOPC_IOEINT3_MODE(x)	((x) << 12)
+#define IOPC_IOEINT2EN		(1 << 11)	/* GPIO Pin for External/Soft Interrupt 2 Enable */
+#define IOPC_IOEINT2TM		(7 << 8)	/* GPIO Pin for External/Soft Interrupt 2 Trigger Mode */
+#define IOPC_IOEINT2_MODE(x)	((x) << 8)
+#define IOPC_IOEINT1EN		(1 << 7)	/* GPIO Pin for External/Soft Interrupt 1 Enable */
+#define IOPC_IOEINT1TM		(7 << 4)	/* GPIO Pin for External/Soft Interrupt 1 Trigger Mode */
+#define IOPC_IOEINT1_MODE(x)	((x) << 4)
+#define IOPC_IOEINT0EN		(1 << 3)	/* GPIO Pin for External/Soft Interrupt 0 Enable */
+#define IOPC_IOEINT0TM		(7 << 0)	/* GPIO Pin for External/Soft Interrupt 0 Trigger Mode */
+#define IOPC_IOEINT0_MODE(x)	((x) << 0)
+
+ /* Trigger Modes */
+#define IOPC_TM_LOW		(0)		/* Level Detection (Active Low) */
+#define IOPC_TM_HIGH		(1)		/* Level Detection (Active High) */
+#define IOPC_TM_RISING		(2)		/* Rising Edge Detection */
+#define IOPC_TM_FALLING		(4)		/* Falling Edge Detection */
+#define IOPC_TM_EDGE		(6)		/* Both Edge Detection */
+
+/* Port Data Register */
+#define IOPD_(x)		(1 << (x))	/* Signal Level of GPIO Pin x */
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-hpna.h b/arch/arm/mach-ks8695/include/mach/regs-hpna.h
new file mode 100644
index 0000000..815ce5c
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-hpna.h
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-wan.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - HPNA Registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_HPNA_H
+#define KS8695_HPNA_H
+
+#define KS8695_HPNA_OFFSET	(0xF0000 + 0xA000)
+#define KS8695_HPNA_VA		(KS8695_IO_VA + KS8695_HPNA_OFFSET)
+#define KS8695_HPNA_PA		(KS8695_IO_PA + KS8695_HPNA_OFFSET)
+
+
+/*
+ * HPNA registers
+ */
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-irq.h b/arch/arm/mach-ks8695/include/mach/regs-irq.h
new file mode 100644
index 0000000..352b7e8
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-irq.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-irq.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - IRQ registers and bit definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_IRQ_H
+#define KS8695_IRQ_H
+
+#define KS8695_IRQ_OFFSET	(0xF0000 + 0xE200)
+#define KS8695_IRQ_VA		(KS8695_IO_VA + KS8695_IRQ_OFFSET)
+#define KS8695_IRQ_PA		(KS8695_IO_PA + KS8695_IRQ_OFFSET)
+
+
+/*
+ * Interrupt Controller registers
+ */
+#define KS8695_INTMC		(0x00)		/* Mode Control Register */
+#define KS8695_INTEN		(0x04)		/* Interrupt Enable Register */
+#define KS8695_INTST		(0x08)		/* Interrupt Status Register */
+#define KS8695_INTPW		(0x0c)		/* Interrupt Priority (WAN MAC) */
+#define KS8695_INTPH		(0x10)		/* Interrupt Priority (HPNA) [KS8695 only] */
+#define KS8695_INTPL		(0x14)		/* Interrupt Priority (LAN MAC) */
+#define KS8695_INTPT		(0x18)		/* Interrupt Priority (Timer) */
+#define KS8695_INTPU		(0x1c)		/* Interrupt Priority (UART) */
+#define KS8695_INTPE		(0x20)		/* Interrupt Priority (External Interrupt) */
+#define KS8695_INTPC		(0x24)		/* Interrupt Priority (Communications Channel) */
+#define KS8695_INTPBE		(0x28)		/* Interrupt Priority (Bus Error Response) */
+#define KS8695_INTMS		(0x2c)		/* Interrupt Mask Status Register */
+#define KS8695_INTHPF		(0x30)		/* Interrupt Pending Highest Priority (FIQ) */
+#define KS8695_INTHPI		(0x34)		/* Interrupt Pending Highest Priority (IRQ) */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-lan.h b/arch/arm/mach-ks8695/include/mach/regs-lan.h
new file mode 100644
index 0000000..9ef4099
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-lan.h
@@ -0,0 +1,65 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-lan.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - LAN Registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_LAN_H
+#define KS8695_LAN_H
+
+#define KS8695_LAN_OFFSET	(0xF0000 + 0x8000)
+#define KS8695_LAN_VA		(KS8695_IO_VA + KS8695_LAN_OFFSET)
+#define KS8695_LAN_PA		(KS8695_IO_PA + KS8695_LAN_OFFSET)
+
+
+/*
+ * LAN registers
+ */
+#define KS8695_LMDTXC		(0x00)		/* DMA Transmit Control */
+#define KS8695_LMDRXC		(0x04)		/* DMA Receive Control */
+#define KS8695_LMDTSC		(0x08)		/* DMA Transmit Start Command */
+#define KS8695_LMDRSC		(0x0c)		/* DMA Receive Start Command */
+#define KS8695_LTDLB		(0x10)		/* Transmit Descriptor List Base Address */
+#define KS8695_LRDLB		(0x14)		/* Receive Descriptor List Base Address */
+#define KS8695_LMAL		(0x18)		/* MAC Station Address Low */
+#define KS8695_LMAH		(0x1c)		/* MAC Station Address High */
+#define KS8695_LMAAL_(n)	(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
+#define KS8695_LMAAH_(n)	(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
+
+
+/* DMA Transmit Control Register */
+#define LMDTXC_LMTRST		(1    << 31)	/* Soft Reset */
+#define LMDTXC_LMTBS		(0x3f << 24)	/* Transmit Burst Size */
+#define LMDTXC_LMTUCG		(1    << 18)	/* Transmit UDP Checksum Generate */
+#define LMDTXC_LMTTCG		(1    << 17)	/* Transmit TCP Checksum Generate */
+#define LMDTXC_LMTICG		(1    << 16)	/* Transmit IP Checksum Generate */
+#define LMDTXC_LMTFCE		(1    <<  9)	/* Transmit Flow Control Enable */
+#define LMDTXC_LMTLB		(1    <<  8)	/* Loopback mode */
+#define LMDTXC_LMTEP		(1    <<  2)	/* Transmit Enable Padding */
+#define LMDTXC_LMTAC		(1    <<  1)	/* Transmit Add CRC */
+#define LMDTXC_LMTE		(1    <<  0)	/* TX Enable */
+
+/* DMA Receive Control Register */
+#define LMDRXC_LMRBS		(0x3f << 24)	/* Receive Burst Size */
+#define LMDRXC_LMRUCC		(1    << 18)	/* Receive UDP Checksum check */
+#define LMDRXC_LMRTCG		(1    << 17)	/* Receive TCP Checksum check */
+#define LMDRXC_LMRICG		(1    << 16)	/* Receive IP Checksum check */
+#define LMDRXC_LMRFCE		(1    <<  9)	/* Receive Flow Control Enable */
+#define LMDRXC_LMRB		(1    <<  6)	/* Receive Broadcast */
+#define LMDRXC_LMRM		(1    <<  5)	/* Receive Multicast */
+#define LMDRXC_LMRU		(1    <<  4)	/* Receive Unicast */
+#define LMDRXC_LMRERR		(1    <<  3)	/* Receive Error Frame */
+#define LMDRXC_LMRA		(1    <<  2)	/* Receive All */
+#define LMDRXC_LMRE		(1    <<  1)	/* RX Enable */
+
+/* Additional Station Address High */
+#define LMAAH_E			(1    << 31)	/* Address Enabled */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-mem.h b/arch/arm/mach-ks8695/include/mach/regs-mem.h
new file mode 100644
index 0000000..55806bc
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-mem.h
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-mem.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Memory Controller registers and bit definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_MEM_H
+#define KS8695_MEM_H
+
+#define KS8695_MEM_OFFSET	(0xF0000 + 0x4000)
+#define KS8695_MEM_VA		(KS8695_IO_VA + KS8695_MEM_OFFSET)
+#define KS8695_MEM_PA		(KS8695_IO_PA + KS8695_MEM_OFFSET)
+
+
+/*
+ * Memory Controller Registers
+ */
+#define KS8695_EXTACON0		(0x00)		/* External I/O 0 Access Control */
+#define KS8695_EXTACON1		(0x04)		/* External I/O 1 Access Control */
+#define KS8695_EXTACON2		(0x08)		/* External I/O 2 Access Control */
+#define KS8695_ROMCON0		(0x10)		/* ROM/SRAM/Flash 1 Control Register */
+#define KS8695_ROMCON1		(0x14)		/* ROM/SRAM/Flash 2 Control Register */
+#define KS8695_ERGCON		(0x20)		/* External I/O and ROM/SRAM/Flash General Register */
+#define KS8695_SDCON0		(0x30)		/* SDRAM Control Register 0 */
+#define KS8695_SDCON1		(0x34)		/* SDRAM Control Register 1 */
+#define KS8695_SDGCON		(0x38)		/* SDRAM General Control */
+#define KS8695_SDBCON		(0x3c)		/* SDRAM Buffer Control */
+#define KS8695_REFTIM		(0x40)		/* SDRAM Refresh Timer */
+
+
+/* External I/O Access Control Registers */
+#define EXTACON_EBNPTR		(0x3ff << 22)		/* Last Address Pointer */
+#define EXTACON_EBBPTR		(0x3ff << 12)		/* Base Pointer */
+#define EXTACON_EBTACT		(7     <<  9)		/* Write Enable/Output Enable Active Time */
+#define EXTACON_EBTCOH		(7     <<  6)		/* Chip Select Hold Time */
+#define EXTACON_EBTACS		(7     <<  3)		/* Address Setup Time before ECSN */
+#define EXTACON_EBTCOS		(7     <<  0)		/* Chip Select Time before OEN */
+
+/* ROM/SRAM/Flash Control Register */
+#define ROMCON_RBNPTR		(0x3ff << 22)		/* Next Pointer */
+#define ROMCON_RBBPTR		(0x3ff << 12)		/* Base Pointer */
+#define ROMCON_RBTACC		(7     <<  4)		/* Access Cycle Time */
+#define ROMCON_RBTPA		(3     <<  2)		/* Page Address Access Time */
+#define ROMCON_PMC		(3     <<  0)		/* Page Mode Configuration */
+#define		PMC_NORMAL		(0 << 0)
+#define		PMC_4WORD		(1 << 0)
+#define		PMC_8WORD		(2 << 0)
+#define		PMC_16WORD		(3 << 0)
+
+/* External I/O and ROM/SRAM/Flash General Register */
+#define ERGCON_TMULT		(3 << 28)		/* Time Multiplier */
+#define ERGCON_DSX2		(3 << 20)		/* Data Width (External I/O Bank 2) */
+#define ERGCON_DSX1		(3 << 18)		/* Data Width (External I/O Bank 1) */
+#define ERGCON_DSX0		(3 << 16)		/* Data Width (External I/O Bank 0) */
+#define ERGCON_DSR1		(3 <<  2)		/* Data Width (ROM/SRAM/Flash Bank 1) */
+#define ERGCON_DSR0		(3 <<  0)		/* Data Width (ROM/SRAM/Flash Bank 0) */
+
+/* SDRAM Control Register */
+#define SDCON_DBNPTR		(0x3ff << 22)		/* Last Address Pointer */
+#define SDCON_DBBPTR		(0x3ff << 12)		/* Base Pointer */
+#define SDCON_DBCAB		(3     <<  8)		/* Column Address Bits */
+#define SDCON_DBBNUM		(1     <<  3)		/* Number of Banks */
+#define SDCON_DBDBW		(3     <<  1)		/* Data Bus Width */
+
+/* SDRAM General Control Register */
+#define SDGCON_SDTRC		(3 << 2)		/* RAS to CAS latency */
+#define SDGCON_SDCAS		(3 << 0)		/* CAS latency */
+
+/* SDRAM Buffer Control Register */
+#define SDBCON_SDESTA		(1 << 31)		/* SDRAM Engine Status */
+#define SDBCON_RBUFBDIS		(1 << 24)		/* Read Buffer Burst Enable */
+#define SDBCON_WFIFOEN		(1 << 23)		/* Write FIFO Enable */
+#define SDBCON_RBUFEN		(1 << 22)		/* Read Buffer Enable */
+#define SDBCON_FLUSHWFIFO	(1 << 21)		/* Flush Write FIFO */
+#define SDBCON_RBUFINV		(1 << 20)		/* Read Buffer Invalidate */
+#define SDBCON_SDINI		(3 << 16)		/* SDRAM Initialization Control */
+#define SDBCON_SDMODE		(0x3fff << 0)		/* SDRAM Mode Register Value Program */
+
+/* SDRAM Refresh Timer Register */
+#define REFTIM_REFTIM		(0xffff << 0)		/* Refresh Timer Value */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-misc.h b/arch/arm/mach-ks8695/include/mach/regs-misc.h
new file mode 100644
index 0000000..2740c52
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-misc.h
@@ -0,0 +1,97 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-misc.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Miscellaneous Registers
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_MISC_H
+#define KS8695_MISC_H
+
+#define KS8695_MISC_OFFSET	(0xF0000 + 0xEA00)
+#define KS8695_MISC_VA		(KS8695_IO_VA + KS8695_MISC_OFFSET)
+#define KS8695_MISC_PA		(KS8695_IO_PA + KS8695_MISC_OFFSET)
+
+
+/*
+ * Miscellaneous registers
+ */
+#define KS8695_DID		(0x00)		/* Device ID */
+#define KS8695_RID		(0x04)		/* Revision ID */
+#define KS8695_HMC		(0x08)		/* HPNA Miscellaneous Control [KS8695 only] */
+#define KS8695_WMC		(0x0c)		/* WAN Miscellaneous Control */
+#define KS8695_WPPM		(0x10)		/* WAN PHY Power Management */
+#define KS8695_PPS		(0x1c)		/* PHY PowerSave */
+
+/* Device ID Register */
+#define DID_ID			(0xffff << 0)	/* Device ID */
+
+/* Revision ID Register */
+#define RID_SUBID		(0xf << 4)	/* Sub-Device ID */
+#define RID_REVISION		(0xf << 0)	/* Revision ID */
+
+/* HPNA Miscellaneous Control Register */
+#define HMC_HSS			(1 << 1)	/* Speed */
+#define HMC_HDS			(1 << 0)	/* Duplex */
+
+/* WAN Miscellaneous Control Register */
+#define WMC_WANC		(1 << 30)	/* Auto-negotiation complete */
+#define WMC_WANR		(1 << 29)	/* Auto-negotiation restart */
+#define WMC_WANAP		(1 << 28)	/* Advertise Pause */
+#define WMC_WANA100F		(1 << 27)	/* Advertise 100 FDX */
+#define WMC_WANA100H		(1 << 26)	/* Advertise 100 HDX */
+#define WMC_WANA10F		(1 << 25)	/* Advertise 10 FDX */
+#define WMC_WANA10H		(1 << 24)	/* Advertise 10 HDX */
+#define WMC_WLS			(1 << 23)	/* Link status */
+#define WMC_WDS			(1 << 22)	/* Duplex status */
+#define WMC_WSS			(1 << 21)	/* Speed status */
+#define WMC_WLPP		(1 << 20)	/* Link Partner Pause */
+#define WMC_WLP100F		(1 << 19)	/* Link Partner 100 FDX */
+#define WMC_WLP100H		(1 << 18)	/* Link Partner 100 HDX */
+#define WMC_WLP10F		(1 << 17)	/* Link Partner 10 FDX */
+#define WMC_WLP10H		(1 << 16)	/* Link Partner 10 HDX */
+#define WMC_WAND		(1 << 15)	/* Auto-negotiation disable */
+#define WMC_WANF100		(1 << 14)	/* Force 100 */
+#define WMC_WANFF		(1 << 13)	/* Force FDX */
+#define WMC_WLED1S		(7 <<  4)	/* LED1 Select */
+#define		WLED1S_SPEED		(0 << 4)
+#define		WLED1S_LINK		(1 << 4)
+#define		WLED1S_DUPLEX		(2 << 4)
+#define		WLED1S_COLLISION	(3 << 4)
+#define		WLED1S_ACTIVITY		(4 << 4)
+#define		WLED1S_FDX_COLLISION	(5 << 4)
+#define		WLED1S_LINK_ACTIVITY	(6 << 4)
+#define WMC_WLED0S		(7 << 0)	/* LED0 Select */
+#define		WLED0S_SPEED		(0 << 0)
+#define		WLED0S_LINK		(1 << 0)
+#define		WLED0S_DUPLEX		(2 << 0)
+#define		WLED0S_COLLISION	(3 << 0)
+#define		WLED0S_ACTIVITY		(4 << 0)
+#define		WLED0S_FDX_COLLISION	(5 << 0)
+#define		WLED0S_LINK_ACTIVITY	(6 << 0)
+
+/* WAN PHY Power Management Register */
+#define WPPM_WLPBK		(1 << 14)	/* Local Loopback */
+#define WPPM_WRLPKB		(1 << 13)	/* Remove Loopback */
+#define WPPM_WPI		(1 << 12)	/* PHY isolate */
+#define WPPM_WFL		(1 << 10)	/* Force link */
+#define WPPM_MDIXS		(1 << 9)	/* MDIX Status */
+#define WPPM_FEF		(1 << 8)	/* Far End Fault */
+#define WPPM_AMDIXP		(1 << 7)	/* Auto MDIX Parameter */
+#define WPPM_TXDIS		(1 << 6)	/* Disable transmitter */
+#define WPPM_DFEF		(1 << 5)	/* Disable Far End Fault */
+#define WPPM_PD			(1 << 4)	/* Power Down */
+#define WPPM_DMDX		(1 << 3)	/* Disable Auto MDI/MDIX */
+#define WPPM_FMDX		(1 << 2)	/* Force MDIX */
+#define WPPM_LPBK		(1 << 1)	/* MAX Loopback */
+
+/* PHY Power Save Register */
+#define PPS_PPSM		(1 << 0)	/* PHY Power Save Mode */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-pci.h b/arch/arm/mach-ks8695/include/mach/regs-pci.h
new file mode 100644
index 0000000..75a9db6
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-pci.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-pci.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - PCI bridge registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define KS8695_PCI_OFFSET	(0xF0000 + 0x2000)
+#define KS8695_PCI_VA		(KS8695_IO_VA + KS8695_PCI_OFFSET)
+#define KS8695_PCI_PA		(KS8695_IO_PA + KS8695_PCI_OFFSET)
+
+
+#define KS8695_CRCFID		(0x000)		/* Configuration: Identification */
+#define KS8695_CRCFCS		(0x004)		/* Configuration: Command and Status */
+#define KS8695_CRCFRV		(0x008)		/* Configuration: Revision */
+#define KS8695_CRCFLT		(0x00C)		/* Configuration: Latency Timer */
+#define KS8695_CRCBMA		(0x010)		/* Configuration: Base Memory Address */
+#define KS8695_CRCSID		(0x02C)		/* Configuration: Subsystem ID */
+#define KS8695_CRCFIT		(0x03C)		/* Configuration: Interrupt */
+#define KS8695_PBCA		(0x100)		/* Bridge Configuration Address */
+#define KS8695_PBCD		(0x104)		/* Bridge Configuration Data */
+#define KS8695_PBM		(0x200)		/* Bridge Mode */
+#define KS8695_PBCS		(0x204)		/* Bridge Control and Status */
+#define KS8695_PMBA		(0x208)		/* Bridge Memory Base Address */
+#define KS8695_PMBAC		(0x20C)		/* Bridge Memory Base Address Control */
+#define KS8695_PMBAM		(0x210)		/* Bridge Memory Base Address Mask */
+#define KS8695_PMBAT		(0x214)		/* Bridge Memory Base Address Translation */
+#define KS8695_PIOBA		(0x218)		/* Bridge I/O Base Address */
+#define KS8695_PIOBAC		(0x21C)		/* Bridge I/O Base Address Control */
+#define KS8695_PIOBAM		(0x220)		/* Bridge I/O Base Address Mask */
+#define KS8695_PIOBAT		(0x224)		/* Bridge I/O Base Address Translation */
+
+
+/* Configuration: Identification */
+
+/* Configuration: Command and Status */
+
+/* Configuration: Revision */
+
+
+
+#define CFRV_GUEST		(1 << 23)
+
+#define PBCA_TYPE1		(1)
+#define PBCA_ENABLE		(1 << 31)
+
+
diff --git a/arch/arm/mach-ks8695/include/mach/regs-switch.h b/arch/arm/mach-ks8695/include/mach/regs-switch.h
new file mode 100644
index 0000000..56d12e8
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-switch.h
@@ -0,0 +1,66 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-switch.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Switch Registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_SWITCH_H
+#define KS8695_SWITCH_H
+
+#define KS8695_SWITCH_OFFSET	(0xF0000 + 0xe800)
+#define KS8695_SWITCH_VA	(KS8695_IO_VA + KS8695_SWITCH_OFFSET)
+#define KS8695_SWITCH_PA	(KS8695_IO_PA + KS8695_SWITCH_OFFSET)
+
+
+/*
+ * Switch registers
+ */
+#define KS8695_SEC0		(0x00)		/* Switch Engine Control 0 */
+#define KS8695_SEC1		(0x04)		/* Switch Engine Control 1 */
+#define KS8695_SEC2		(0x08)		/* Switch Engine Control 2 */
+
+#define KS8695_P(x)_C(z)	(0xc0 + (((x)-1)*3 + ((z)-1))*4)	/* Port Configuration Registers */
+
+#define KS8695_SEP12AN		(0x48)		/* Port 1 & 2 Auto-Negotiation */
+#define KS8695_SEP34AN		(0x4c)		/* Port 3 & 4 Auto-Negotiation */
+#define KS8695_SEIAC		(0x50)		/* Indirect Access Control */
+#define KS8695_SEIADH2		(0x54)		/* Indirect Access Data High 2 */
+#define KS8695_SEIADH1		(0x58)		/* Indirect Access Data High 1 */
+#define KS8695_SEIADL		(0x5c)		/* Indirect Access Data Low */
+#define KS8695_SEAFC		(0x60)		/* Advance Feature Control */
+#define KS8695_SEDSCPH		(0x64)		/* TOS Priority High */
+#define KS8695_SEDSCPL		(0x68)		/* TOS Priority Low */
+#define KS8695_SEMAH		(0x6c)		/* Switch Engine MAC Address High */
+#define KS8695_SEMAL		(0x70)		/* Switch Engine MAC Address Low */
+#define KS8695_LPPM12		(0x74)		/* Port 1 & 2 PHY Power Management */
+#define KS8695_LPPM34		(0x78)		/* Port 3 & 4 PHY Power Management */
+
+
+/* Switch Engine Control 0 */
+#define SEC0_LLED1S		(7 << 25)	/* LED1 Select */
+#define		LLED1S_SPEED		(0 << 25)
+#define		LLED1S_LINK		(1 << 25)
+#define		LLED1S_DUPLEX		(2 << 25)
+#define		LLED1S_COLLISION	(3 << 25)
+#define		LLED1S_ACTIVITY		(4 << 25)
+#define		LLED1S_FDX_COLLISION	(5 << 25)
+#define		LLED1S_LINK_ACTIVITY	(6 << 25)
+#define SEC0_LLED0S		(7 << 22)	/* LED0 Select */
+#define		LLED0S_SPEED		(0 << 22)
+#define		LLED0S_LINK		(1 << 22)
+#define		LLED0S_DUPLEX		(2 << 22)
+#define		LLED0S_COLLISION	(3 << 22)
+#define		LLED0S_ACTIVITY		(4 << 22)
+#define		LLED0S_FDX_COLLISION	(5 << 22)
+#define		LLED0S_LINK_ACTIVITY	(6 << 22)
+#define SEC0_ENABLE		(1 << 0)	/* Enable Switch */
+
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-sys.h b/arch/arm/mach-ks8695/include/mach/regs-sys.h
new file mode 100644
index 0000000..57c20be
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-sys.h
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-sys.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - System control registers and bit definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_SYS_H
+#define KS8695_SYS_H
+
+#define KS8695_SYS_OFFSET	(0xF0000 + 0x0000)
+#define KS8695_SYS_VA		(KS8695_IO_VA + KS8695_SYS_OFFSET)
+#define KS8695_SYS_PA		(KS8695_IO_PA + KS8695_SYS_OFFSET)
+
+
+#define KS8695_SYSCFG		(0x00)		/* System Configuration Register */
+#define KS8695_CLKCON		(0x04)		/* System Clock and Bus Control Register */
+
+
+/* System Configuration Register */
+#define SYSCFG_SPRBP		(0x3ff << 16)	/* Register Bank Base Pointer */
+
+/* System Clock and Bus Control Register */
+#define CLKCON_SFMODE		(1 << 8)	/* System Fast Mode for Simulation */
+#define CLKCON_SCDC		(7 << 0)	/* System Clock Divider Select */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-timer.h b/arch/arm/mach-ks8695/include/mach/regs-timer.h
new file mode 100644
index 0000000..e620cda
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-timer.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-timer.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Timer registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_TIMER_H
+#define KS8695_TIMER_H
+
+#define KS8695_TMR_OFFSET	(0xF0000 + 0xE400)
+#define KS8695_TMR_VA		(KS8695_IO_VA + KS8695_TMR_OFFSET)
+#define KS8695_TMR_PA		(KS8695_IO_PA + KS8695_TMR_OFFSET)
+
+
+/*
+ * Timer registers
+ */
+#define KS8695_TMCON		(0x00)		/* Timer Control Register */
+#define KS8695_T1TC		(0x04)		/* Timer 1 Timeout Count Register */
+#define KS8695_T0TC		(0x08)		/* Timer 0 Timeout Count Register */
+#define KS8695_T1PD		(0x0C)		/* Timer 1 Pulse Count Register */
+#define KS8695_T0PD		(0x10)		/* Timer 0 Pulse Count Register */
+
+
+/* Timer Control Register */
+#define TMCON_T1EN		(1 << 1)	/* Timer 1 Enable */
+#define TMCON_T0EN		(1 << 0)	/* Timer 0 Enable */
+
+/* Timer0 Timeout Counter Register */
+#define T0TC_WATCHDOG		(0xff)		/* Enable watchdog mode */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-uart.h b/arch/arm/mach-ks8695/include/mach/regs-uart.h
new file mode 100644
index 0000000..8581fbc
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-uart.h
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-uart.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - UART register and bit definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef KS8695_UART_H
+#define KS8695_UART_H
+
+#define KS8695_UART_OFFSET	(0xF0000 + 0xE000)
+#define KS8695_UART_VA		(KS8695_IO_VA + KS8695_UART_OFFSET)
+#define KS8695_UART_PA		(KS8695_IO_PA + KS8695_UART_OFFSET)
+
+
+/*
+ * UART registers
+ */
+#define KS8695_URRB	(0x00)		/* Receive Buffer Register */
+#define KS8695_URTH	(0x04)		/* Transmit Holding Register */
+#define KS8695_URFC	(0x08)		/* FIFO Control Register */
+#define KS8695_URLC	(0x0C)		/* Line Control Register */
+#define KS8695_URMC	(0x10)		/* Modem Control Register */
+#define KS8695_URLS	(0x14)		/* Line Status Register */
+#define KS8695_URMS	(0x18)		/* Modem Status Register */
+#define KS8695_URBD	(0x1C)		/* Baud Rate Divisor Register */
+#define KS8695_USR	(0x20)		/* Status Register */
+
+
+/* FIFO Control Register */
+#define URFC_URFRT	(3 << 6)	/* Receive FIFO Trigger Level */
+#define		URFC_URFRT_1	(0 << 6)
+#define		URFC_URFRT_4	(1 << 6)
+#define		URFC_URFRT_8	(2 << 6)
+#define		URFC_URFRT_14	(3 << 6)
+#define URFC_URTFR	(1 << 2)	/* Transmit FIFO Reset */
+#define URFC_URRFR	(1 << 1)	/* Receive FIFO Reset */
+#define URFC_URFE	(1 << 0)	/* FIFO Enable */
+
+/* Line Control Register */
+#define URLC_URSBC	(1 << 6)	/* Set Break Condition */
+#define URLC_PARITY	(7 << 3)	/* Parity */
+#define		URPE_NONE	(0 << 3)
+#define		URPE_ODD	(1 << 3)
+#define		URPE_EVEN	(3 << 3)
+#define		URPE_MARK	(5 << 3)
+#define		URPE_SPACE	(7 << 3)
+#define URLC_URSB	(1 << 2)	/* Stop Bits */
+#define URLC_URCL	(3 << 0)	/* Character Length */
+#define		URCL_5		(0 << 0)
+#define		URCL_6		(1 << 0)
+#define		URCL_7		(2 << 0)
+#define		URCL_8		(3 << 0)
+
+/* Modem Control Register */
+#define URMC_URLB	(1 << 4)	/* Loop-back mode */
+#define URMC_UROUT2	(1 << 3)	/* OUT2 signal */
+#define URMC_UROUT1	(1 << 2)	/* OUT1 signal */
+#define URMC_URRTS	(1 << 1)	/* Request to Send */
+#define URMC_URDTR	(1 << 0)	/* Data Terminal Ready */
+
+/* Line Status Register */
+#define URLS_URRFE	(1 << 7)	/* Receive FIFO Error */
+#define URLS_URTE	(1 << 6)	/* Transmit Empty */
+#define URLS_URTHRE	(1 << 5)	/* Transmit Holding Register Empty */
+#define URLS_URBI	(1 << 4)	/* Break Interrupt */
+#define URLS_URFE	(1 << 3)	/* Framing Error */
+#define URLS_URPE	(1 << 2)	/* Parity Error */
+#define URLS_URROE	(1 << 1)	/* Receive Overrun Error */
+#define URLS_URDR	(1 << 0)	/* Receive Data Ready */
+
+/* Modem Status Register */
+#define URMS_URDCD	(1 << 7)	/* Data Carrier Detect */
+#define URMS_URRI	(1 << 6)	/* Ring Indicator */
+#define URMS_URDSR	(1 << 5)	/* Data Set Ready */
+#define URMS_URCTS	(1 << 4)	/* Clear to Send */
+#define URMS_URDDCD	(1 << 3)	/* Delta Data Carrier Detect */
+#define URMS_URTERI	(1 << 2)	/* Trailing Edge Ring Indicator */
+#define URMS_URDDST	(1 << 1)	/* Delta Data Set Ready */
+#define URMS_URDCTS	(1 << 0)	/* Delta Clear to Send */
+
+/* Status Register */
+#define USR_UTI		(1 << 0)	/* Timeout Indication */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-wan.h b/arch/arm/mach-ks8695/include/mach/regs-wan.h
new file mode 100644
index 0000000..eb494ec6
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-wan.h
@@ -0,0 +1,65 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-wan.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - WAN Registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_WAN_H
+#define KS8695_WAN_H
+
+#define KS8695_WAN_OFFSET	(0xF0000 + 0x6000)
+#define KS8695_WAN_VA		(KS8695_IO_VA + KS8695_WAN_OFFSET)
+#define KS8695_WAN_PA		(KS8695_IO_PA + KS8695_WAN_OFFSET)
+
+
+/*
+ * WAN registers
+ */
+#define KS8695_WMDTXC		(0x00)		/* DMA Transmit Control */
+#define KS8695_WMDRXC		(0x04)		/* DMA Receive Control */
+#define KS8695_WMDTSC		(0x08)		/* DMA Transmit Start Command */
+#define KS8695_WMDRSC		(0x0c)		/* DMA Receive Start Command */
+#define KS8695_WTDLB		(0x10)		/* Transmit Descriptor List Base Address */
+#define KS8695_WRDLB		(0x14)		/* Receive Descriptor List Base Address */
+#define KS8695_WMAL		(0x18)		/* MAC Station Address Low */
+#define KS8695_WMAH		(0x1c)		/* MAC Station Address High */
+#define KS8695_WMAAL_(n)	(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
+#define KS8695_WMAAH_(n)	(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
+
+
+/* DMA Transmit Control Register */
+#define WMDTXC_WMTRST		(1    << 31)	/* Soft Reset */
+#define WMDTXC_WMTBS		(0x3f << 24)	/* Transmit Burst Size */
+#define WMDTXC_WMTUCG		(1    << 18)	/* Transmit UDP Checksum Generate */
+#define WMDTXC_WMTTCG		(1    << 17)	/* Transmit TCP Checksum Generate */
+#define WMDTXC_WMTICG		(1    << 16)	/* Transmit IP Checksum Generate */
+#define WMDTXC_WMTFCE		(1    <<  9)	/* Transmit Flow Control Enable */
+#define WMDTXC_WMTLB		(1    <<  8)	/* Loopback mode */
+#define WMDTXC_WMTEP		(1    <<  2)	/* Transmit Enable Padding */
+#define WMDTXC_WMTAC		(1    <<  1)	/* Transmit Add CRC */
+#define WMDTXC_WMTE		(1    <<  0)	/* TX Enable */
+
+/* DMA Receive Control Register */
+#define WMDRXC_WMRBS		(0x3f << 24)	/* Receive Burst Size */
+#define WMDRXC_WMRUCC		(1    << 18)	/* Receive UDP Checksum check */
+#define WMDRXC_WMRTCG		(1    << 17)	/* Receive TCP Checksum check */
+#define WMDRXC_WMRICG		(1    << 16)	/* Receive IP Checksum check */
+#define WMDRXC_WMRFCE		(1    <<  9)	/* Receive Flow Control Enable */
+#define WMDRXC_WMRB		(1    <<  6)	/* Receive Broadcast */
+#define WMDRXC_WMRM		(1    <<  5)	/* Receive Multicast */
+#define WMDRXC_WMRU		(1    <<  4)	/* Receive Unicast */
+#define WMDRXC_WMRERR		(1    <<  3)	/* Receive Error Frame */
+#define WMDRXC_WMRA		(1    <<  2)	/* Receive All */
+#define WMDRXC_WMRE		(1    <<  0)	/* RX Enable */
+
+/* Additional Station Address High */
+#define WMAAH_E			(1    << 31)	/* Address Enabled */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h
new file mode 100644
index 0000000..2a6f918
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/system.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-s3c2410/include/mach/system.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * KS8695 - System function defines and includes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+#include <mach/regs-timer.h>
+
+static void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks,
+	 */
+	cpu_do_idle();
+
+}
+
+static void arch_reset(char mode)
+{
+	unsigned int reg;
+
+	if (mode == 's')
+		cpu_reset(0);
+
+	/* disable timer0 */
+	reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
+	__raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+
+	/* enable watchdog mode */
+	__raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
+
+	/* re-enable timer0 */
+	__raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+}
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h
new file mode 100644
index 0000000..4682e35
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/timex.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * KS8695 - Time Parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* timers are derived from MCLK, which is 25MHz */
+#define CLOCK_TICK_RATE 25000000
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h
new file mode 100644
index 0000000..0eee37a
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/uncompress.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Kernel uncompressor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/io.h>
+#include <mach/regs-uart.h>
+
+static void putc(char c)
+{
+	while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
+		barrier();
+
+	__raw_writel(c, KS8695_UART_PA + KS8695_URTH);
+}
+
+static inline void flush(void)
+{
+	while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTE))
+		barrier();
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/vmalloc.h b/arch/arm/mach-ks8695/include/mach/vmalloc.h
new file mode 100644
index 0000000..744ac66
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/vmalloc.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2006 Ben Dooks
+ * Copyright (C) 2006 Simtec Electronics <linux@simtec.co.uk>
+ *
+ * KS8695 vmalloc definition
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (KS8695_IO_VA & PGDIR_MASK)
+
+#endif
diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c
index 0773ae7..e5e71f4 100644
--- a/arch/arm/mach-ks8695/irq.c
+++ b/arch/arm/mach-ks8695/irq.c
@@ -25,14 +25,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 static void ks8695_irq_mask(unsigned int irqno)
 {
diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c
index 17c5ef1..184ef74 100644
--- a/arch/arm/mach-ks8695/leds.c
+++ b/arch/arm/mach-ks8695/leds.c
@@ -13,8 +13,8 @@
 #include <linux/init.h>
 
 #include <asm/leds.h>
-#include <asm/arch/devices.h>
-#include <asm/arch/gpio.h>
+#include <mach/devices.h>
+#include <mach/gpio.h>
 
 
 static inline void ks8695_led_on(unsigned int led)
diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
index c0c2d590..1746c67 100644
--- a/arch/arm/mach-ks8695/pci.c
+++ b/arch/arm/mach-ks8695/pci.c
@@ -31,10 +31,10 @@
 #include <asm/io.h>
 #include <asm/signal.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/devices.h>
-#include <asm/arch/regs-pci.h>
+#include <mach/devices.h>
+#include <mach/regs-pci.h>
 
 
 static int pci_dbg;
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
index 02f766b..940888d 100644
--- a/arch/arm/mach-ks8695/time.c
+++ b/arch/arm/mach-ks8695/time.c
@@ -28,8 +28,8 @@
 #include <asm/io.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/regs-timer.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-timer.h>
+#include <mach/regs-irq.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-l7200/core.c b/arch/arm/mach-l7200/core.c
index 8cec912..50d2324 100644
--- a/arch/arm/mach-l7200/core.c
+++ b/arch/arm/mach-l7200/core.c
@@ -13,7 +13,7 @@
 #include <asm/types.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-l7200/include/mach/aux_reg.h b/arch/arm/mach-l7200/include/mach/aux_reg.h
new file mode 100644
index 0000000..4671558
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/aux_reg.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-l7200/include/mach/aux_reg.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *   08-02-2000	SJH	Created file
+ */
+#ifndef _ASM_ARCH_AUXREG_H
+#define _ASM_ARCH_AUXREG_H
+
+#include <mach/hardware.h>
+
+#define l7200aux_reg	*((volatile unsigned int *) (AUX_BASE))
+
+/*
+ * Auxillary register values
+ */
+#define AUX_CLEAR		0x00000000
+#define AUX_DIAG_LED_ON		0x00000002
+#define AUX_RTS_UART1		0x00000004
+#define AUX_DTR_UART1		0x00000008
+#define AUX_KBD_COLUMN_12_HIGH	0x00000010
+#define AUX_KBD_COLUMN_12_OFF	0x00000020
+#define AUX_KBD_COLUMN_13_HIGH	0x00000040
+#define AUX_KBD_COLUMN_13_OFF	0x00000080
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
new file mode 100644
index 0000000..34eed2a6
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -0,0 +1,40 @@
+/* arch/arm/mach-l7200/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.equ	io_virt, IO_BASE
+		.equ	io_phys, IO_START
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #io_phys		@ physical base address
+		movne	\rx, #io_virt		@ virtual address
+		add	\rx, \rx, #0x00044000	@ UART1
+@		add	\rx, \rx, #0x00045000	@ UART2
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x0]	@ UARTDR
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
+		bne	1001b
+		.endm
diff --git a/arch/arm/mach-l7200/include/mach/dma.h b/arch/arm/mach-l7200/include/mach/dma.h
new file mode 100644
index 0000000..c7e48bd
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/dma.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-l7200/include/mach/dma.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  08-29-2000	SJH	Created
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS         0xd0000000
+
+#define DMA_S0                  0
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-l7200/include/mach/entry-macro.S b/arch/arm/mach-l7200/include/mach/entry-macro.S
new file mode 100644
index 0000000..1726d91
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/entry-macro.S
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-l7200/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for L7200-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+
+		.equ	irq_base_addr,	IO_BASE_2
+
+		.macro  disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov     \irqstat, #irq_base_addr		@ Virt addr IRQ regs
+		add	\irqstat, \irqstat, #0x00001000		@ Status reg
+		ldr     \irqstat, [\irqstat, #0]		@ get interrupts
+		mov     \irqnr, #0
+1001:		tst     \irqstat, #1
+		addeq   \irqnr, \irqnr, #1
+		moveq   \irqstat, \irqstat, lsr #1
+		tsteq   \irqnr, #32
+		beq     1001b
+		teq     \irqnr, #32
+		.endm
+
diff --git a/arch/arm/mach-l7200/include/mach/gp_timers.h b/arch/arm/mach-l7200/include/mach/gp_timers.h
new file mode 100644
index 0000000..2b7086a
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/gp_timers.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-l7200/include/mach/gp_timers.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *   07-28-2000	SJH	Created file
+ *   08-02-2000	SJH	Used structure for registers
+ */
+#ifndef _ASM_ARCH_GPTIMERS_H
+#define _ASM_ARCH_GPTIMERS_H
+
+#include <mach/hardware.h>
+
+/*
+ * Layout of L7200 general purpose timer registers
+ */
+struct GPT_Regs {
+	unsigned int TIMERLOAD;
+	unsigned int TIMERVALUE;
+	unsigned int TIMERCONTROL;
+	unsigned int TIMERCLEAR;
+};
+
+#define GPT_BASE		(IO_BASE_2 + 0x3000)
+#define l7200_timer1_regs	((volatile struct GPT_Regs *) (GPT_BASE))
+#define l7200_timer2_regs	((volatile struct GPT_Regs *) (GPT_BASE + 0x20))
+
+/*
+ * General register values
+ */
+#define	GPT_PRESCALE_1		0x00000000
+#define	GPT_PRESCALE_16		0x00000004
+#define	GPT_PRESCALE_256	0x00000008
+#define GPT_MODE_FREERUN	0x00000000
+#define GPT_MODE_PERIODIC	0x00000040
+#define GPT_ENABLE		0x00000080
+#define GPT_BZTOG		0x00000100
+#define GPT_BZMOD		0x00000200
+#define GPT_LOAD_MASK 		0x0000ffff
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/gpio.h b/arch/arm/mach-l7200/include/mach/gpio.h
new file mode 100644
index 0000000..c7b0a5d
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/gpio.h
@@ -0,0 +1,105 @@
+/****************************************************************************/
+/*
+ *      arch/arm/mach-l7200/include/mach/gpio.h
+ *
+ *      Registers and  helper functions for the L7200 Link-Up Systems
+ *      GPIO.
+ *
+ *      (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define GPIO_OFF   0x00005000  /* Offset from IO_START to the GPIO reg's. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define GPIO_START (IO_START_2 + GPIO_OFF) /* Physical addr of the GPIO reg. */
+#define GPIO_BASE  (IO_BASE_2  + GPIO_OFF) /* Virtual addr of the GPIO reg. */
+
+/* Offsets from the start of the GPIO for all the registers. */
+#define PADR_OFF     0x000
+#define PADDR_OFF    0x004
+#define PASBSR_OFF   0x008
+#define PAEENR_OFF   0x00c
+#define PAESNR_OFF   0x010
+#define PAESTR_OFF   0x014
+#define PAIMR_OFF    0x018
+#define PAINT_OFF    0x01c
+
+#define PBDR_OFF     0x020
+#define PBDDR_OFF    0x024
+#define PBSBSR_OFF   0x028
+#define PBIMR_OFF    0x038
+#define PBINT_OFF    0x03c
+
+#define PCDR_OFF     0x040
+#define PCDDR_OFF    0x044
+#define PCSBSR_OFF   0x048
+#define PCIMR_OFF    0x058
+#define PCINT_OFF    0x05c
+
+#define PDDR_OFF     0x060
+#define PDDDR_OFF    0x064
+#define PDSBSR_OFF   0x068
+#define PDEENR_OFF   0x06c
+#define PDESNR_OFF   0x070
+#define PDESTR_OFF   0x074
+#define PDIMR_OFF    0x078
+#define PDINT_OFF    0x07c
+
+#define PEDR_OFF     0x080
+#define PEDDR_OFF    0x084
+#define PESBSR_OFF   0x088
+#define PEEENR_OFF   0x08c
+#define PEESNR_OFF   0x090
+#define PEESTR_OFF   0x094
+#define PEIMR_OFF    0x098
+#define PEINT_OFF    0x09c
+
+/* Define the GPIO registers for use by device drivers and the kernel. */
+#define PADR   (*(volatile unsigned long *)(GPIO_BASE+PADR_OFF))
+#define PADDR  (*(volatile unsigned long *)(GPIO_BASE+PADDR_OFF))
+#define PASBSR (*(volatile unsigned long *)(GPIO_BASE+PASBSR_OFF))
+#define PAEENR (*(volatile unsigned long *)(GPIO_BASE+PAEENR_OFF))
+#define PAESNR (*(volatile unsigned long *)(GPIO_BASE+PAESNR_OFF))
+#define PAESTR (*(volatile unsigned long *)(GPIO_BASE+PAESTR_OFF))
+#define PAIMR  (*(volatile unsigned long *)(GPIO_BASE+PAIMR_OFF))
+#define PAINT  (*(volatile unsigned long *)(GPIO_BASE+PAINT_OFF))
+
+#define PBDR   (*(volatile unsigned long *)(GPIO_BASE+PBDR_OFF))
+#define PBDDR  (*(volatile unsigned long *)(GPIO_BASE+PBDDR_OFF))
+#define PBSBSR (*(volatile unsigned long *)(GPIO_BASE+PBSBSR_OFF))
+#define PBIMR  (*(volatile unsigned long *)(GPIO_BASE+PBIMR_OFF))
+#define PBINT  (*(volatile unsigned long *)(GPIO_BASE+PBINT_OFF))
+
+#define PCDR   (*(volatile unsigned long *)(GPIO_BASE+PCDR_OFF))
+#define PCDDR  (*(volatile unsigned long *)(GPIO_BASE+PCDDR_OFF))
+#define PCSBSR (*(volatile unsigned long *)(GPIO_BASE+PCSBSR_OFF))
+#define PCIMR  (*(volatile unsigned long *)(GPIO_BASE+PCIMR_OFF))
+#define PCINT  (*(volatile unsigned long *)(GPIO_BASE+PCINT_OFF))
+
+#define PDDR   (*(volatile unsigned long *)(GPIO_BASE+PDDR_OFF))
+#define PDDDR  (*(volatile unsigned long *)(GPIO_BASE+PDDDR_OFF))
+#define PDSBSR (*(volatile unsigned long *)(GPIO_BASE+PDSBSR_OFF))
+#define PDEENR (*(volatile unsigned long *)(GPIO_BASE+PDEENR_OFF))
+#define PDESNR (*(volatile unsigned long *)(GPIO_BASE+PDESNR_OFF))
+#define PDESTR (*(volatile unsigned long *)(GPIO_BASE+PDESTR_OFF))
+#define PDIMR  (*(volatile unsigned long *)(GPIO_BASE+PDIMR_OFF))
+#define PDINT  (*(volatile unsigned long *)(GPIO_BASE+PDINT_OFF))
+
+#define PEDR   (*(volatile unsigned long *)(GPIO_BASE+PEDR_OFF))
+#define PEDDR  (*(volatile unsigned long *)(GPIO_BASE+PEDDR_OFF))
+#define PESBSR (*(volatile unsigned long *)(GPIO_BASE+PESBSR_OFF))
+#define PEEENR (*(volatile unsigned long *)(GPIO_BASE+PEEENR_OFF))
+#define PEESNR (*(volatile unsigned long *)(GPIO_BASE+PEESNR_OFF))
+#define PEESTR (*(volatile unsigned long *)(GPIO_BASE+PEESTR_OFF))
+#define PEIMR  (*(volatile unsigned long *)(GPIO_BASE+PEIMR_OFF))
+#define PEINT  (*(volatile unsigned long *)(GPIO_BASE+PEINT_OFF))
+
+#define VEE_EN         0x02
+#define BACKLIGHT_EN   0x04
diff --git a/arch/arm/mach-l7200/include/mach/hardware.h b/arch/arm/mach-l7200/include/mach/hardware.h
new file mode 100644
index 0000000..c31909cf
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/hardware.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-l7200/include/mach/hardware.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * This file contains the hardware definitions for the 
+ * LinkUp Systems L7200 SOC development board.
+ *
+ * Changelog:
+ *   02-01-2000	 RS	Created L7200 version, derived from rpc code
+ *   03-21-2000	SJH	Cleaned up file
+ *   04-21-2000	 RS 	Changed mapping of I/O in virtual space
+ *   04-25-2000	SJH	Removed unused symbols and such
+ *   05-05-2000	SJH	Complete rewrite
+ *   07-31-2000	SJH	Added undocumented debug auxillary port to
+ *			get at last two columns for keyboard driver
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+#define RAM_START		0xf0000000
+#define RAM_SIZE		0x02000000
+#define RAM_BASE		0xc0000000
+
+#define IO_START		0x80000000      /* I/O */
+#define IO_SIZE			0x01000000
+#define IO_BASE			0xd0000000
+
+#define IO_START_2		0x90000000      /* I/O */
+#define IO_SIZE_2		0x01000000
+#define IO_BASE_2		0xd1000000
+
+#define AUX_START		0x1a000000      /* AUX PORT */
+#define AUX_SIZE 		0x01000000
+#define AUX_BASE		0xd2000000
+
+#define FLASH1_START		0x00000000      /* FLASH BANK 1 */
+#define FLASH1_SIZE 		0x01000000
+#define FLASH1_BASE		0xd3000000
+
+#define FLASH2_START		0x10000000      /* FLASH BANK 2 */
+#define FLASH2_SIZE 		0x01000000
+#define FLASH2_BASE		0xd4000000
+
+#define ISA_START		0x20000000	/* ISA */
+#define ISA_SIZE		0x20000000
+#define ISA_BASE		0xe0000000
+
+#define PCIO_BASE		IO_BASE
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/io.h b/arch/arm/mach-l7200/include/mach/io.h
new file mode 100644
index 0000000..d432ba9
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-l7200/include/mach/io.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  03-21-2000	SJH	Created from arch/arm/mach-nexuspci/include/mach/io.h
+ *  08-31-2000	SJH	Added in IO functions necessary for new drivers
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * There are not real ISA nor PCI buses, so we fake it.
+ */
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+#define __io(a)	__io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/irqs.h b/arch/arm/mach-l7200/include/mach/irqs.h
new file mode 100644
index 0000000..7edffd7
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/irqs.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/mach-l7200/include/mach/irqs.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *   01-02-2000 RS	Create l7200 version
+ *   03-28-2000 SJH	Removed unused interrupt
+ *   07-28-2000 SJH	Added pseudo-keyboard interrupt
+ */
+
+/*
+ * NOTE: The second timer (Timer 2) is used as the keyboard
+ *       interrupt when the keyboard driver is enabled.
+ */
+
+#define NR_IRQS          32
+
+#define IRQ_STWDOG        0   /* Watchdog timer */
+#define IRQ_PROG          1   /* Programmable interrupt */
+#define IRQ_DEBUG_RX      2   /* Comm Rx debug */
+#define IRQ_DEBUG_TX      3   /* Comm Tx debug */
+#define IRQ_GCTC1         4   /* Timer 1 */
+#define IRQ_GCTC2         5   /* Timer 2 / Keyboard */
+#define IRQ_DMA           6   /* DMA controller */
+#define IRQ_CLCD          7   /* Color LCD controller */
+#define IRQ_SM_RX         8   /* Smart card */
+#define IRQ_SM_TX         9   /* Smart cart */
+#define IRQ_SM_RST       10   /* Smart card */
+#define IRQ_SIB          11   /* Serial Interface Bus */
+#define IRQ_MMC          12   /* MultiMediaCard */
+#define IRQ_SSP1         13   /* Synchronous Serial Port 1 */
+#define IRQ_SSP2         14   /* Synchronous Serial Port 1 */
+#define IRQ_SPI          15   /* SPI slave */
+#define IRQ_UART_1       16   /* UART 1 */
+#define IRQ_UART_2       17   /* UART 2 */
+#define IRQ_IRDA         18   /* IRDA */
+#define IRQ_RTC_TICK     19   /* Real Time Clock tick */
+#define IRQ_RTC_ALARM    20   /* Real Time Clock alarm */
+#define IRQ_GPIO         21   /* General Purpose IO */
+#define IRQ_GPIO_DMA     22   /* General Purpose IO, DMA */
+#define IRQ_M2M          23   /* Memory to memory DMA  */
+#define IRQ_RESERVED     24   /* RESERVED, don't use */
+#define IRQ_INTF         25   /* External active low interrupt */
+#define IRQ_INT0         26   /* External active low interrupt */
+#define IRQ_INT1         27   /* External active low interrupt */
+#define IRQ_INT2         28   /* External active low interrupt */
+#define IRQ_UCB1200      29   /* Interrupt generated by UCB1200*/
+#define IRQ_BAT_LO       30   /* Low batery or external power */
+#define IRQ_MEDIA_CHG    31   /* Media change interrupt */
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START	64
diff --git a/arch/arm/mach-l7200/include/mach/memory.h b/arch/arm/mach-l7200/include/mach/memory.h
new file mode 100644
index 0000000..f338cf3
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/memory.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-l7200/include/mach/memory.h
+ *
+ * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
+ * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *
+ * Changelog:
+ *  03-13-2000	SJH	Created
+ *  04-13-2000  RS      Changed bus macros for new addr
+ *  05-03-2000  SJH     Removed bus macros and fixed virt_to_phys macro
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset on the L7200 SDB.
+ */
+#define PHYS_OFFSET     UL(0xf0000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * Cache flushing area - ROM
+ */
+#define FLUSH_BASE_PHYS		0x40000000
+#define FLUSH_BASE		0xdf000000
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/pmpcon.h b/arch/arm/mach-l7200/include/mach/pmpcon.h
new file mode 100644
index 0000000..3959871
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/pmpcon.h
@@ -0,0 +1,46 @@
+/****************************************************************************/
+/*
+ *  arch/arm/mach-l7200/include/mach/pmpcon.h
+ *
+ *   Registers and  helper functions for the L7200 Link-Up Systems
+ *   DC/DC converter register.
+ *
+ *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define PMPCON_OFF 0x00006000  /* Offset from IO_START_2. */
+
+/* IO_START_2 and IO_BASE_2 are defined in hardware.h */
+
+#define PMPCON_START (IO_START_2 + PMPCON_OFF)  /* Physical address of reg. */
+#define PMPCON_BASE  (IO_BASE_2  + PMPCON_OFF)  /* Virtual address of reg. */
+
+
+#define PMPCON (*(volatile unsigned int *)(PMPCON_BASE))
+
+#define PWM2_50CYCLE 0x800
+#define CONTRAST     0x9
+
+#define PWM1H (CONTRAST)
+#define PWM1L (CONTRAST << 4)
+
+#define PMPCON_VALUE  (PWM2_50CYCLE | PWM1L | PWM1H) 
+	
+/* PMPCON = 0x811;   // too light and fuzzy
+ * PMPCON = 0x844;   
+ * PMPCON = 0x866;   // better color poor depth
+ * PMPCON = 0x888;   // Darker but better depth 
+ * PMPCON = 0x899;   // Darker even better depth
+ * PMPCON = 0x8aa;   // too dark even better depth
+ * PMPCON = 0X8cc;   // Way too dark
+ */
+
+/* As CONTRAST value increases the greater the depth perception and
+ * the darker the colors.
+ */
diff --git a/arch/arm/mach-l7200/include/mach/pmu.h b/arch/arm/mach-l7200/include/mach/pmu.h
new file mode 100644
index 0000000..a2da7ae
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/pmu.h
@@ -0,0 +1,125 @@
+/****************************************************************************/
+/*
+ *  arch/arm/mach-l7200/include/mach/pmu.h
+ *
+ *   Registers and  helper functions for the L7200 Link-Up Systems
+ *   Power Management Unit (PMU).
+ *
+ *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define PMU_OFF   0x00050000  /* Offset from IO_START to the PMU registers. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define PMU_START (IO_START + PMU_OFF)  /* Physical addr. of the PMU reg. */
+#define PMU_BASE  (IO_BASE  + PMU_OFF)  /* Virtual addr. of the PMU reg. */
+
+
+/* Define the PMU registers for use by device drivers and the kernel. */
+
+typedef struct {
+     unsigned int CURRENT;  /* Current configuration register */
+     unsigned int NEXT;     /* Next configuration register */
+     unsigned int reserved;
+     unsigned int RUN;      /* Run configuration register */
+     unsigned int COMM;     /* Configuration command register */
+     unsigned int SDRAM;    /* SDRAM configuration bypass register */
+} pmu_interface;
+
+#define PMU ((volatile pmu_interface *)(PMU_BASE))
+
+
+/* Macro's for reading the common register fields. */
+
+#define GET_TRANSOP(reg)  ((reg >> 25) & 0x03) /* Bits 26-25 */
+#define GET_OSCEN(reg)    ((reg >> 16) & 0x01)
+#define GET_OSCMUX(reg)   ((reg >> 15) & 0x01)
+#define GET_PLLMUL(reg)   ((reg >>  9) & 0x3f) /* Bits 14-9 */
+#define GET_PLLEN(reg)    ((reg >>  8) & 0x01)
+#define GET_PLLMUX(reg)   ((reg >>  7) & 0x01)
+#define GET_BCLK_DIV(reg) ((reg >>  3) & 0x03) /* Bits 4-3 */
+#define GET_SDRB_SEL(reg) ((reg >>  2) & 0x01)
+#define GET_SDRF_SEL(reg) ((reg >>  1) & 0x01)
+#define GET_FASTBUS(reg)  (reg & 0x1)
+
+/* CFG_NEXT register */
+
+#define CFG_NEXT_CLOCKRECOVERY ((PMU->NEXT >> 18) & 0x7f)   /* Bits 24-18 */
+#define CFG_NEXT_INTRET        ((PMU->NEXT >> 17) & 0x01)
+#define CFG_NEXT_SDR_STOP      ((PMU->NEXT >>  6) & 0x01)
+#define CFG_NEXT_SYSCLKEN      ((PMU->NEXT >>  5) & 0x01)
+
+/* Useful field values that can be used to construct the
+ * CFG_NEXT and CFG_RUN registers.
+ */
+
+#define TRANSOP_NOP      0<<25  /* NOCHANGE_NOSTALL */
+#define NOCHANGE_STALL   1<<25
+#define CHANGE_NOSTALL   2<<25
+#define CHANGE_STALL     3<<25
+
+#define INTRET           1<<17
+#define OSCEN            1<<16
+#define OSCMUX           1<<15
+
+/* PLL frequencies */
+
+#define PLLMUL_0         0<<9         /*  3.6864 MHz */
+#define PLLMUL_1         1<<9         /*  ?????? MHz */
+#define PLLMUL_5         5<<9         /*  18.432 MHz */
+#define PLLMUL_10       10<<9         /*  36.864 MHz */
+#define PLLMUL_18       18<<9         /*  ?????? MHz */
+#define PLLMUL_20       20<<9         /*  73.728 MHz */
+#define PLLMUL_32       32<<9         /*  ?????? MHz */
+#define PLLMUL_35       35<<9         /* 129.024 MHz */
+#define PLLMUL_36       36<<9         /*  ?????? MHz */
+#define PLLMUL_39       39<<9         /*  ?????? MHz */
+#define PLLMUL_40       40<<9         /* 147.456 MHz */
+
+/* Clock recovery times */
+
+#define CRCLOCK_1        1<<18
+#define CRCLOCK_2        2<<18
+#define CRCLOCK_4        4<<18
+#define CRCLOCK_8        8<<18
+#define CRCLOCK_16      16<<18
+#define CRCLOCK_32      32<<18
+#define CRCLOCK_63      63<<18
+#define CRCLOCK_127    127<<18
+
+#define PLLEN            1<<8
+#define PLLMUX           1<<7
+#define SDR_STOP         1<<6
+#define SYSCLKEN         1<<5
+
+#define BCLK_DIV_4       2<<3
+#define BCLK_DIV_2       1<<3
+#define BCLK_DIV_1       0<<3
+
+#define SDRB_SEL         1<<2
+#define SDRF_SEL         1<<1
+#define FASTBUS          1<<0
+
+
+/* CFG_SDRAM */
+
+#define SDRREFFQ         1<<0  /* Only if SDRSTOPRQ is not set. */
+#define SDRREFACK        1<<1  /* Read-only */
+#define SDRSTOPRQ        1<<2  /* Only if SDRREFFQ is not set. */
+#define SDRSTOPACK       1<<3  /* Read-only */
+#define PICEN            1<<4  /* Enable Co-procesor */
+#define PICTEST          1<<5
+
+#define GET_SDRREFFQ    ((PMU->SDRAM >> 0) & 0x01)
+#define GET_SDRREFACK   ((PMU->SDRAM >> 1) & 0x01) /* Read-only */
+#define GET_SDRSTOPRQ   ((PMU->SDRAM >> 2) & 0x01)
+#define GET_SDRSTOPACK  ((PMU->SDRAM >> 3) & 0x01) /* Read-only */
+#define GET_PICEN       ((PMU->SDRAM >> 4) & 0x01)
+#define GET_PICTEST     ((PMU->SDRAM >> 5) & 0x01)
diff --git a/arch/arm/mach-l7200/include/mach/serial.h b/arch/arm/mach-l7200/include/mach/serial.h
new file mode 100644
index 0000000..adc05e5f
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/serial.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-l7200/include/mach/serial.h
+ *
+ * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  03-20-2000  SJH     Created
+ *  03-26-2000  SJH     Added flags for serial ports
+ *  03-27-2000  SJH     Corrected BASE_BAUD value
+ *  04-14-2000  RS      Made register addr dependent on IO_BASE
+ *  05-03-2000  SJH     Complete rewrite
+ *  05-09-2000	SJH	Stripped out architecture specific serial stuff
+ *                      and placed it in a separate file
+ *  07-28-2000	SJH	Moved base baud rate variable
+ */
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+/*
+ * This assumes you have a 3.6864 MHz clock for your UART.
+ */
+#define BASE_BAUD	3686400
+
+/*
+ * Standard COM flags
+ */
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+#define STD_SERIAL_PORT_DEFNS		\
+	/* MAGIC UART CLK   PORT       IRQ     FLAGS */			\
+	{ 0, BASE_BAUD, UART1_BASE, IRQ_UART_1, STD_COM_FLAGS },  /* ttyLU0 */ \
+	{ 0, BASE_BAUD, UART2_BASE, IRQ_UART_2, STD_COM_FLAGS },  /* ttyLU1 */ \
+
+#define EXTRA_SERIAL_PORT_DEFNS
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/serial_l7200.h b/arch/arm/mach-l7200/include/mach/serial_l7200.h
new file mode 100644
index 0000000..645f1c5
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/serial_l7200.h
@@ -0,0 +1,101 @@
+/*
+ * arch/arm/mach-l7200/include/mach/serial_l7200.h
+ *
+ * Copyright (c) 2000 Steven Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  05-09-2000	SJH	Created
+ */
+#ifndef __ASM_ARCH_SERIAL_L7200_H
+#define __ASM_ARCH_SERIAL_L7200_H
+
+#include <mach/memory.h>
+
+/*
+ * This assumes you have a 3.6864 MHz clock for your UART.
+ */
+#define BASE_BAUD 3686400
+
+/*
+ * UART base register addresses
+ */
+#define UART1_BASE	(IO_BASE + 0x00044000)
+#define UART2_BASE	(IO_BASE + 0x00045000)
+
+/*
+ * UART register offsets
+ */
+#define UARTDR			0x00	/* Tx/Rx data */
+#define RXSTAT			0x04	/* Rx status */
+#define H_UBRLCR		0x08	/* mode register high */
+#define M_UBRLCR		0x0C	/* mode reg mid (MSB of baud)*/
+#define L_UBRLCR		0x10	/* mode reg low (LSB of baud)*/
+#define UARTCON			0x14	/* control register */
+#define UARTFLG			0x18	/* flag register */
+#define UARTINTSTAT		0x1C	/* FIFO IRQ status register */
+#define UARTINTMASK		0x20	/* FIFO IRQ mask register */
+
+/*
+ * UART baud rate register values
+ */
+#define BR_110			0x827
+#define BR_1200			0x06e
+#define BR_2400			0x05f
+#define BR_4800			0x02f
+#define BR_9600			0x017
+#define BR_14400		0x00f
+#define BR_19200		0x00b
+#define BR_38400		0x005
+#define BR_57600		0x003
+#define BR_76800 		0x002
+#define BR_115200		0x001
+
+/*
+ * Receiver status register (RXSTAT) mask values
+ */
+#define RXSTAT_NO_ERR		0x00	/* No error */
+#define RXSTAT_FRM_ERR		0x01	/* Framing error */
+#define RXSTAT_PAR_ERR		0x02	/* Parity error */
+#define RXSTAT_OVR_ERR		0x04	/* Overrun error */
+
+/*
+ * High byte of UART bit rate and line control register (H_UBRLCR) values
+ */
+#define UBRLCR_BRK		0x01	/* generate break on tx */
+#define UBRLCR_PEN		0x02	/* enable parity */
+#define UBRLCR_PDIS		0x00	/* disable parity */
+#define UBRLCR_EVEN		0x04	/* 1= even parity,0 = odd parity */
+#define UBRLCR_STP2		0x08	/* transmit 2 stop bits */
+#define UBRLCR_FIFO		0x10	/* enable FIFO */
+#define UBRLCR_LEN5		0x60	/* word length5 */
+#define UBRLCR_LEN6		0x40	/* word length6 */
+#define UBRLCR_LEN7		0x20	/* word length7 */
+#define UBRLCR_LEN8		0x00	/* word length8 */
+
+/*
+ * UART control register (UARTCON) values
+ */
+#define UARTCON_UARTEN		0x01	/* Enable UART */
+#define UARTCON_DMAONERR	0x08	/* Mask RxDmaRq when errors occur */
+
+/*
+ * UART flag register (UARTFLG) mask values
+ */
+#define UARTFLG_UTXFF		0x20	/* Transmit FIFO full */
+#define UARTFLG_URXFE		0x10	/* Receiver FIFO empty */
+#define UARTFLG_UBUSY		0x08	/* Transmitter busy */
+#define UARTFLG_DCD		0x04	/* Data carrier detect */
+#define UARTFLG_DSR		0x02	/* Data set ready */
+#define UARTFLG_CTS		0x01	/* Clear to send */
+
+/*
+ * UART interrupt status/clear registers (UARTINTSTAT/CLR) values
+ */
+#define UART_TXINT		0x01	/* TX interrupt */
+#define UART_RXINT		0x02	/* RX interrupt */
+#define UART_RXERRINT		0x04	/* RX error interrupt */
+#define UART_MSINT		0x08	/* Modem Status interrupt */
+#define UART_UDINT		0x10	/* UART Disabled interrupt */
+#define UART_ALLIRQS		0x1f	/* All interrupts */
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/sib.h b/arch/arm/mach-l7200/include/mach/sib.h
new file mode 100644
index 0000000..9657287
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/sib.h
@@ -0,0 +1,119 @@
+/****************************************************************************/
+/*
+ *  arch/arm/mach-l7200/include/mach/sib.h
+ *
+ *  Registers and helper functions for the Serial Interface Bus.
+ *
+ *  (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define SIB_OFF   0x00040000  /* Offset from IO_START to the SIB reg's. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define SIB_START (IO_START + SIB_OFF) /* Physical addr of the SIB reg. */
+#define SIB_BASE  (IO_BASE  + SIB_OFF) /* Virtual addr of the SIB reg.  */
+
+/* Offsets from the start of the SIB for all the registers. */
+
+/* Define the SIB registers for use by device drivers and the kernel. */
+
+typedef struct
+{
+     unsigned int MCCR;    /* SIB Control Register           Offset: 0x00 */
+     unsigned int RES1;    /* Reserved                       Offset: 0x04 */
+     unsigned int MCDR0;   /* SIB Data Register 0            Offset: 0x08 */
+     unsigned int MCDR1;   /* SIB Data Register 1            Offset: 0x0c */
+     unsigned int MCDR2;   /* SIB Data Register 2 (UCB1x00)  Offset: 0x10 */
+     unsigned int RES2;    /* Reserved                       Offset: 0x14 */
+     unsigned int MCSR;    /* SIB Status Register            Offset: 0x18 */
+} SIB_Interface;
+
+#define SIB ((volatile SIB_Interface *) (SIB_BASE))
+
+/* MCCR */
+
+#define INTERNAL_FREQ   9216000  /* Hertz */
+#define AUDIO_FREQ         5000  /* Hertz */
+#define TELECOM_FREQ       5000  /* Hertz */
+
+#define AUDIO_DIVIDE    (INTERNAL_FREQ / (32 * AUDIO_FREQ))
+#define TELECOM_DIVIDE  (INTERNAL_FREQ / (32 * TELECOM_FREQ))
+
+#define MCCR_ASD57      AUDIO_DIVIDE
+#define MCCR_TSD57      (TELECOM_DIVIDE << 8)
+#define MCCR_MCE        (1 << 16)             /* SIB enable */
+#define MCCR_ECS        (1 << 17)             /* External Clock Select */
+#define MCCR_ADM        (1 << 18)             /* A/D Data Sampling */
+#define MCCR_PMC        (1 << 26)             /* PIN Multiplexer Control */
+
+
+#define GET_ASD ((SIB->MCCR >>  0) & 0x3f) /* Audio Sample Rate Div. */
+#define GET_TSD ((SIB->MCCR >>  8) & 0x3f) /* Telcom Sample Rate Div. */
+#define GET_MCE ((SIB->MCCR >> 16) & 0x01) /* SIB Enable */
+#define GET_ECS ((SIB->MCCR >> 17) & 0x01) /* External Clock Select */
+#define GET_ADM ((SIB->MCCR >> 18) & 0x01) /* A/D Data Sampling Mode */
+#define GET_TTM ((SIB->MCCR >> 19) & 0x01) /* Telco Trans. FIFO I mask */ 
+#define GET_TRM ((SIB->MCCR >> 20) & 0x01) /* Telco Recv. FIFO I mask */
+#define GET_ATM ((SIB->MCCR >> 21) & 0x01) /* Audio Trans. FIFO I mask */ 
+#define GET_ARM ((SIB->MCCR >> 22) & 0x01) /* Audio Recv. FIFO I mask */
+#define GET_LBM ((SIB->MCCR >> 23) & 0x01) /* Loop Back Mode */
+#define GET_ECP ((SIB->MCCR >> 24) & 0x03) /* Extern. Clck Prescale sel */
+#define GET_PMC ((SIB->MCCR >> 26) & 0x01) /* PIN Multiplexer Control */
+#define GET_ERI ((SIB->MCCR >> 27) & 0x01) /* External Read Interrupt */
+#define GET_EWI ((SIB->MCCR >> 28) & 0x01) /* External Write Interrupt */
+
+/* MCDR0 */
+
+#define AUDIO_RECV     ((SIB->MCDR0 >> 4) & 0xfff)
+#define AUDIO_WRITE(v) ((SIB->MCDR0 = (v & 0xfff) << 4))
+
+/* MCDR1 */
+
+#define TELECOM_RECV     ((SIB->MCDR1 >> 2) & 032fff)
+#define TELECOM_WRITE(v) ((SIB->MCDR1 = (v & 0x3fff) << 2))
+
+
+/* MCSR */
+
+#define MCSR_ATU (1 << 4)  /* Audio Transmit FIFO Underrun */
+#define MCSR_ARO (1 << 5)  /* Audio Receive  FIFO Underrun */
+#define MCSR_TTU (1 << 6)  /* TELECOM Transmit FIFO Underrun */
+#define MCSR_TRO (1 << 7)  /* TELECOM Receive  FIFO Underrun */
+
+#define MCSR_CLEAR_UNDERUN_BITS (MCSR_ATU | MCSR_ARO | MCSR_TTU | MCSR_TRO)
+
+
+#define GET_ATS ((SIB->MCSR >>  0) & 0x01) /* Audio Transmit FIFO Service Req*/
+#define GET_ARS ((SIB->MCSR >>  1) & 0x01) /* Audio Recv FIFO Service Request*/
+#define GET_TTS ((SIB->MCSR >>  2) & 0x01) /* TELECOM Transmit FIFO  Flag */
+#define GET_TRS ((SIB->MCSR >>  3) & 0x01) /* TELECOM Recv FIFO Service Req. */
+#define GET_ATU ((SIB->MCSR >>  4) & 0x01) /* Audio Transmit FIFO Underrun */
+#define GET_ARO ((SIB->MCSR >>  5) & 0x01) /* Audio Receive  FIFO Underrun */
+#define GET_TTU ((SIB->MCSR >>  6) & 0x01) /* TELECOM Transmit FIFO Underrun */
+#define GET_TRO ((SIB->MCSR >>  7) & 0x01) /* TELECOM Receive  FIFO Underrun */
+#define GET_ANF ((SIB->MCSR >>  8) & 0x01) /* Audio Transmit FIFO not full */
+#define GET_ANE ((SIB->MCSR >>  9) & 0x01) /* Audio Receive FIFO not empty */
+#define GET_TNF ((SIB->MCSR >> 10) & 0x01) /* Telecom Transmit FIFO not full */
+#define GET_TNE ((SIB->MCSR >> 11) & 0x01) /* Telecom Receive FIFO not empty */
+#define GET_CWC ((SIB->MCSR >> 12) & 0x01) /* Codec Write Complete */
+#define GET_CRC ((SIB->MCSR >> 13) & 0x01) /* Codec Read Complete */
+#define GET_ACE ((SIB->MCSR >> 14) & 0x01) /* Audio Codec Enabled */
+#define GET_TCE ((SIB->MCSR >> 15) & 0x01) /* Telecom Codec Enabled */
+
+/* MCDR2 */
+
+#define MCDR2_rW               (1 << 16)
+
+#define WRITE_MCDR2(reg, data) (SIB->MCDR2 =((reg<<17)|MCDR2_rW|(data&0xffff)))
+#define MCDR2_WRITE_COMPLETE   GET_CWC
+
+#define INITIATE_MCDR2_READ(reg) (SIB->MCDR2 = (reg << 17))
+#define MCDR2_READ_COMPLETE      GET_CRC
+#define MCDR2_READ               (SIB->MCDR2 & 0xffff)
diff --git a/arch/arm/mach-l7200/include/mach/sys-clock.h b/arch/arm/mach-l7200/include/mach/sys-clock.h
new file mode 100644
index 0000000..2d7722b
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/sys-clock.h
@@ -0,0 +1,67 @@
+/****************************************************************************/
+/*
+ *  arch/arm/mach-l7200/include/mach/sys-clock.h
+ *
+ *   Registers and  helper functions for the L7200 Link-Up Systems
+ *   System clocks.
+ *
+ *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define SYS_CLOCK_OFF   0x00050030  /* Offset from IO_START. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF)  /* Physical address */
+#define SYS_CLOCK_BASE  (IO_BASE  + SYS_CLOCK_OFF)  /* Virtual address  */
+
+/* Define the interface to the SYS_CLOCK */
+
+typedef struct
+{
+     unsigned int ENABLE;
+     unsigned int ESYNC;
+     unsigned int SELECT;
+} sys_clock_interface;
+
+#define SYS_CLOCK   ((volatile sys_clock_interface *)(SYS_CLOCK_BASE))
+
+//#define CLOCK_EN    (*(volatile unsigned long *)(PMU_BASE+CLOCK_EN_OFF))
+//#define CLOCK_ESYNC (*(volatile unsigned long *)(PMU_BASE+CLOCK_ESYNC_OFF))
+//#define CLOCK_SEL   (*(volatile unsigned long *)(PMU_BASE+CLOCK_SEL_OFF))
+
+/* SYS_CLOCK -> ENABLE */
+
+#define SYN_EN          1<<0
+#define B18M_EN         1<<1
+#define CLK3M6_EN       1<<2
+#define BUART_EN        1<<3
+#define CLK18MU_EN      1<<4
+#define FIR_EN          1<<5
+#define MIRN_EN         1<<6
+#define UARTM_EN        1<<7
+#define SIBADC_EN       1<<8
+#define ALTD_EN         1<<9
+#define CLCLK_EN        1<<10
+
+/* SYS_CLOCK -> SELECT */
+
+#define CLK18M_DIV      1<<0
+#define MIR_SEL         1<<1
+#define SSP_SEL         1<<4
+#define MM_DIV          1<<5
+#define MM_SEL          1<<6
+#define ADC_SEL_2       0<<7
+#define ADC_SEL_4       1<<7
+#define ADC_SEL_8       3<<7
+#define ADC_SEL_16      7<<7
+#define ADC_SEL_32      0x0f<<7
+#define ADC_SEL_64      0x1f<<7
+#define ADC_SEL_128     0x3f<<7
+#define ALTD_SEL        1<<13
diff --git a/arch/arm/mach-l7200/include/mach/system.h b/arch/arm/mach-l7200/include/mach/system.h
new file mode 100644
index 0000000..5272abe
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/system.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-l7200/include/mach/system.h
+ *
+ * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog
+ *  03-21-2000  SJH	Created
+ *  04-26-2000  SJH	Fixed functions
+ *  05-03-2000  SJH	Removed usage of obsolete 'iomd.h'
+ *  05-31-2000  SJH	Properly implemented 'arch_idle'
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+	*(unsigned long *)(IO_BASE + 0x50004) = 1;	/* idle mode */
+}
+
+static inline void arch_reset(char mode)
+{
+	if (mode == 's') {
+		cpu_reset(0);
+	}
+}
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/time.h b/arch/arm/mach-l7200/include/mach/time.h
new file mode 100644
index 0000000..061771c2
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/time.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-l7200/include/mach/time.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *   01-02-2000	RS	Created l7200 version, derived from rpc code
+ *   05-03-2000	SJH	Complete rewrite
+ */
+#ifndef _ASM_ARCH_TIME_H
+#define _ASM_ARCH_TIME_H
+
+#include <mach/irqs.h>
+
+/*
+ * RTC base register address
+ */
+#define RTC_BASE	(IO_BASE_2 + 0x2000)
+
+/*
+ * RTC registers
+ */
+#define RTC_RTCDR	(*(volatile unsigned char *) (RTC_BASE + 0x000))
+#define RTC_RTCMR	(*(volatile unsigned char *) (RTC_BASE + 0x004))
+#define RTC_RTCS	(*(volatile unsigned char *) (RTC_BASE + 0x008))
+#define RTC_RTCC	(*(volatile unsigned char *) (RTC_BASE + 0x008))
+#define RTC_RTCDV	(*(volatile unsigned char *) (RTC_BASE + 0x00c))
+#define RTC_RTCCR	(*(volatile unsigned char *) (RTC_BASE + 0x010))
+
+/*
+ * RTCCR register values
+ */
+#define RTC_RATE_32	0x00      /* 32 Hz tick */
+#define RTC_RATE_64	0x10      /* 64 Hz tick */
+#define RTC_RATE_128	0x20      /* 128 Hz tick */
+#define RTC_RATE_256	0x30      /* 256 Hz tick */
+#define RTC_EN_ALARM	0x01      /* Enable alarm */
+#define RTC_EN_TIC	0x04      /* Enable counter */
+#define RTC_EN_STWDOG	0x08      /* Enable watchdog */
+
+/*
+ * Handler for RTC timer interrupt
+ */
+static irqreturn_t
+timer_interrupt(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+	do_timer(1);
+#ifndef CONFIG_SMP
+	update_process_times(user_mode(regs));
+#endif
+	do_profile(regs);
+	RTC_RTCC = 0;				/* Clear interrupt */
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Set up RTC timer interrupt, and return the current time in seconds.
+ */
+void __init time_init(void)
+{
+	RTC_RTCC = 0;				/* Clear interrupt */
+
+	timer_irq.handler = timer_interrupt;
+
+	setup_irq(IRQ_RTC_TICK, &timer_irq);
+
+	RTC_RTCCR = RTC_RATE_128 | RTC_EN_TIC;	/* Set rate and enable timer */
+}
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/timex.h b/arch/arm/mach-l7200/include/mach/timex.h
new file mode 100644
index 0000000..ffc96a6
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-l7200/include/mach/timex.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * 04-21-2000  RS Created file
+ * 05-03-2000 SJH Tick rate was wrong
+ *
+ */
+
+/*
+ * On the ARM720T, clock ticks are set to 128 Hz.
+ *
+ * NOTE: The actual RTC value is set in 'time.h' which
+ *       must be changed when choosing a different tick
+ *       rate. The value of HZ in 'param.h' must also
+ *       be changed to match below.
+ */
+#define CLOCK_TICK_RATE		128
diff --git a/arch/arm/mach-l7200/include/mach/uncompress.h b/arch/arm/mach-l7200/include/mach/uncompress.h
new file mode 100644
index 0000000..591c962
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/uncompress.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-l7200/include/mach/uncompress.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  05-01-2000	SJH	Created
+ *  05-13-2000	SJH	Filled in function bodies
+ *  07-26-2000	SJH	Removed hard coded baud rate
+ */
+
+#include <mach/hardware.h>
+
+#define IO_UART  IO_START + 0x00044000
+
+#define __raw_writeb(v,p)	(*(volatile unsigned char *)(p) = (v))
+#define __raw_readb(p)		(*(volatile unsigned char *)(p))
+
+static inline void putc(int c)
+{
+	while(__raw_readb(IO_UART + 0x18) & 0x20 ||
+	      __raw_readb(IO_UART + 0x18) & 0x08)
+		barrier();
+
+	__raw_writeb(c, IO_UART + 0x00);
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void arch_decomp_setup(void)
+{
+	__raw_writeb(0x00, IO_UART + 0x08);	/* Set HSB */
+	__raw_writeb(0x00, IO_UART + 0x20);	/* Disable IRQs */
+	__raw_writeb(0x01, IO_UART + 0x14);	/* Enable UART */
+}
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-l7200/include/mach/vmalloc.h b/arch/arm/mach-l7200/include/mach/vmalloc.h
new file mode 100644
index 0000000..85f0abb
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-l7200/include/mach/vmalloc.h
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
index c794ca7a..551b972 100644
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c
@@ -13,7 +13,7 @@
 #include <linux/device.h>
 #include <linux/interrupt.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index ff3109a..e373fb8 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -14,7 +14,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-lh7a40x/clcd.c b/arch/arm/mach-lh7a40x/clcd.c
index 395ad9b..a2a5432 100644
--- a/arch/arm/mach-lh7a40x/clcd.c
+++ b/arch/arm/mach-lh7a40x/clcd.c
@@ -23,7 +23,7 @@
 #include <asm/mach/irq.h>
 
 #include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
diff --git a/arch/arm/mach-lh7a40x/clocks.c b/arch/arm/mach-lh7a40x/clocks.c
index 9fe7f3a..4fb23ac 100644
--- a/arch/arm/mach-lh7a40x/clocks.c
+++ b/arch/arm/mach-lh7a40x/clocks.c
@@ -9,8 +9,8 @@
  */
 
 #include <linux/cpufreq.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/clocks.h>
+#include <mach/hardware.h>
+#include <mach/clocks.h>
 #include <linux/err.h>
 
 struct module;
diff --git a/arch/arm/mach-lh7a40x/include/mach/clocks.h b/arch/arm/mach-lh7a40x/include/mach/clocks.h
new file mode 100644
index 0000000..fe2e025
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/clocks.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-lh7a40x/include/mach/clocks.h
+ *
+ *  Copyright (C) 2004 Marc Singer
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_CLOCKS_H
+#define __ASM_ARCH_CLOCKS_H
+
+unsigned int fclkfreq_get (void);
+unsigned int hclkfreq_get (void);
+unsigned int pclkfreq_get (void);
+
+#endif  /* _ASM_ARCH_CLOCKS_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/constants.h b/arch/arm/mach-lh7a40x/include/mach/constants.h
new file mode 100644
index 0000000..55c6edb
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/constants.h
@@ -0,0 +1,91 @@
+/* arch/arm/mach-lh7a40x/include/mach/constants.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *  Copyright (C) 2004 Logic Product Development
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_CONSTANTS_H
+#define __ASM_ARCH_CONSTANTS_H
+
+
+/* Addressing constants */
+
+	/* SoC CPU IO addressing */
+#define IO_PHYS			(0x80000000)
+#define IO_VIRT			(0xf8000000)
+#define IO_SIZE			(0x0000B000)
+
+#ifdef CONFIG_MACH_KEV7A400
+# define CPLD_PHYS		(0x20000000)
+# define CPLD_VIRT		(0xf2000000)
+# define CPLD_SIZE		PAGE_SIZE
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+
+# define IOBARRIER_PHYS		0x10000000 /* Second bank, fastest timing */
+# define IOBARRIER_VIRT		0xf0000000
+# define IOBARRIER_SIZE		PAGE_SIZE
+
+# define CF_PHYS		0x60200000
+# define CF_VIRT		0xf6020000
+# define CF_SIZE		(8*1024)
+
+	/* The IO mappings for the LPD CPLD are, unfortunately, sparse.  */
+# define CPLDX_PHYS(x)		(0x70000000 | ((x) << 20))
+# define CPLDX_VIRT(x)		(0xf7000000 | ((x) << 16))
+# define CPLD00_PHYS		CPLDX_PHYS (0x00) /* Wired LAN */
+# define CPLD00_VIRT		CPLDX_VIRT (0x00)
+# define CPLD00_SIZE		PAGE_SIZE
+# define CPLD02_PHYS		CPLDX_PHYS (0x02)
+# define CPLD02_VIRT		CPLDX_VIRT (0x02)
+# define CPLD02_SIZE		PAGE_SIZE
+# define CPLD06_PHYS		CPLDX_PHYS (0x06)
+# define CPLD06_VIRT		CPLDX_VIRT (0x06)
+# define CPLD06_SIZE		PAGE_SIZE
+# define CPLD08_PHYS		CPLDX_PHYS (0x08)
+# define CPLD08_VIRT		CPLDX_VIRT (0x08)
+# define CPLD08_SIZE		PAGE_SIZE
+# define CPLD0A_PHYS		CPLDX_PHYS (0x0a)
+# define CPLD0A_VIRT		CPLDX_VIRT (0x0a)
+# define CPLD0A_SIZE		PAGE_SIZE
+# define CPLD0C_PHYS		CPLDX_PHYS (0x0c)
+# define CPLD0C_VIRT		CPLDX_VIRT (0x0c)
+# define CPLD0C_SIZE		PAGE_SIZE
+# define CPLD0E_PHYS		CPLDX_PHYS (0x0e)
+# define CPLD0E_VIRT		CPLDX_VIRT (0x0e)
+# define CPLD0E_SIZE		PAGE_SIZE
+# define CPLD10_PHYS		CPLDX_PHYS (0x10)
+# define CPLD10_VIRT		CPLDX_VIRT (0x10)
+# define CPLD10_SIZE		PAGE_SIZE
+# define CPLD12_PHYS		CPLDX_PHYS (0x12)
+# define CPLD12_VIRT		CPLDX_VIRT (0x12)
+# define CPLD12_SIZE		PAGE_SIZE
+# define CPLD14_PHYS		CPLDX_PHYS (0x14)
+# define CPLD14_VIRT		CPLDX_VIRT (0x14)
+# define CPLD14_SIZE		PAGE_SIZE
+# define CPLD16_PHYS		CPLDX_PHYS (0x16)
+# define CPLD16_VIRT		CPLDX_VIRT (0x16)
+# define CPLD16_SIZE		PAGE_SIZE
+# define CPLD18_PHYS		CPLDX_PHYS (0x18)
+# define CPLD18_VIRT		CPLDX_VIRT (0x18)
+# define CPLD18_SIZE		PAGE_SIZE
+# define CPLD1A_PHYS		CPLDX_PHYS (0x1a)
+# define CPLD1A_VIRT		CPLDX_VIRT (0x1a)
+# define CPLD1A_SIZE		PAGE_SIZE
+#endif
+
+	/* Timing constants */
+
+#define	XTAL_IN			14745600	/* 14.7456 MHz crystal */
+#define PLL_CLOCK		(XTAL_IN * 21)	/* 309 MHz PLL clock */
+#define MAX_HCLK_KHZ		100000		/* HCLK max limit ~100MHz */
+#define HCLK			(99993600)
+//#define HCLK			(119808000)
+
+#endif /* __ASM_ARCH_CONSTANTS_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
new file mode 100644
index 0000000..85141ed
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
@@ -0,0 +1,39 @@
+/* arch/arm/mach-lh7a40x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+	@ It is not known if this will be appropriate for every 40x
+	@ board.
+
+		.macro  addruart,rx
+		mrc     p15, 0, \rx, c1, c0
+		tst     \rx, #1                 @ MMU enabled?
+		mov     \rx, #0x00000700        @ offset from base
+		orreq   \rx, \rx, #0x80000000   @ physical base
+		orrne   \rx, \rx, #0xf8000000   @ virtual base
+		.endm
+
+		.macro  senduart,rd,rx
+		strb    \rd, [\rx]              @ DATA
+		.endm
+
+		.macro  busyuart,rd,rx          @ spin while busy
+1001:		ldr     \rd, [\rx, #0x10]       @ STATUS
+		tst     \rd, #1 << 3            @ BUSY (TX FIFO not empty)
+		bne     1001b                   @ yes, spin
+		.endm
+
+		.macro  waituart,rd,rx          @ wait for Tx FIFO room
+1001:		ldrb    \rd, [\rx, #0x10]       @ STATUS
+		tst     \rd, #1 << 5            @ TXFF (TX FIFO full)
+		bne     1001b                   @ yes, spin
+		.endm
diff --git a/arch/arm/mach-lh7a40x/include/mach/dma.h b/arch/arm/mach-lh7a40x/include/mach/dma.h
new file mode 100644
index 0000000..baa3f8d
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/dma.h
@@ -0,0 +1,86 @@
+/* arch/arm/mach-lh7a40x/include/mach/dma.h
+ *
+ *  Copyright (C) 2005 Marc Singer
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+typedef enum {
+	DMA_M2M0	= 0,
+	DMA_M2M1	= 1,
+	DMA_M2P0	= 2,	/* Tx */
+	DMA_M2P1	= 3,	/* Rx */
+	DMA_M2P2	= 4,	/* Tx */
+	DMA_M2P3	= 5,	/* Rx */
+	DMA_M2P4	= 6,	/* Tx - AC97 */
+	DMA_M2P5	= 7,	/* Rx - AC97 */
+	DMA_M2P6	= 8,	/* Tx */
+	DMA_M2P7	= 9,	/* Rx */
+} dma_device_t;
+
+#define DMA_LENGTH_MAX		((64*1024) - 4) /* bytes */
+
+#define DMAC_GCA		__REG(DMAC_PHYS + 0x2b80)
+#define DMAC_GIR		__REG(DMAC_PHYS + 0x2bc0)
+
+#define DMAC_GIR_MMI1		(1<<11)
+#define DMAC_GIR_MMI0		(1<<10)
+#define DMAC_GIR_MPI8		(1<<9)
+#define DMAC_GIR_MPI9		(1<<8)
+#define DMAC_GIR_MPI6		(1<<7)
+#define DMAC_GIR_MPI7		(1<<6)
+#define DMAC_GIR_MPI4		(1<<5)
+#define DMAC_GIR_MPI5		(1<<4)
+#define DMAC_GIR_MPI2		(1<<3)
+#define DMAC_GIR_MPI3		(1<<2)
+#define DMAC_GIR_MPI0		(1<<1)
+#define DMAC_GIR_MPI1		(1<<0)
+
+#define DMAC_M2P0		0x0000
+#define DMAC_M2P1		0x0040
+#define DMAC_M2P2		0x0080
+#define DMAC_M2P3		0x00c0
+#define DMAC_M2P4		0x0240
+#define DMAC_M2P5		0x0200
+#define DMAC_M2P6		0x02c0
+#define DMAC_M2P7		0x0280
+#define DMAC_M2P8		0x0340
+#define DMAC_M2P9		0x0300
+#define DMAC_M2M0		0x0100
+#define DMAC_M2M1		0x0140
+
+#define DMAC_P_PCONTROL(c)	__REG(DMAC_PHYS + (c) + 0x00)
+#define DMAC_P_PINTERRUPT(c)	__REG(DMAC_PHYS + (c) + 0x04)
+#define DMAC_P_PPALLOC(c)	__REG(DMAC_PHYS + (c) + 0x08)
+#define DMAC_P_PSTATUS(c)	__REG(DMAC_PHYS + (c) + 0x0c)
+#define DMAC_P_REMAIN(c)	__REG(DMAC_PHYS + (c) + 0x14)
+#define DMAC_P_MAXCNT0(c)	__REG(DMAC_PHYS + (c) + 0x20)
+#define DMAC_P_BASE0(c)		__REG(DMAC_PHYS + (c) + 0x24)
+#define DMAC_P_CURRENT0(c)	__REG(DMAC_PHYS + (c) + 0x28)
+#define DMAC_P_MAXCNT1(c)	__REG(DMAC_PHYS + (c) + 0x30)
+#define DMAC_P_BASE1(c)		__REG(DMAC_PHYS + (c) + 0x34)
+#define DMAC_P_CURRENT1(c)	__REG(DMAC_PHYS + (c) + 0x38)
+
+#define DMAC_PCONTROL_ENABLE	(1<<4)
+
+#define DMAC_PORT_USB		0
+#define DMAC_PORT_SDMMC		1
+#define DMAC_PORT_AC97_1	2
+#define DMAC_PORT_AC97_2	3
+#define DMAC_PORT_AC97_3	4
+#define DMAC_PORT_UART1		6
+#define DMAC_PORT_UART2		7
+#define DMAC_PORT_UART3		8
+
+#define DMAC_PSTATUS_CURRSTATE_SHIFT	4
+#define DMAC_PSTATUS_CURRSTATE_MASK	0x3
+
+#define DMAC_PSTATUS_NEXTBUF	 (1<<6)
+#define DMAC_PSTATUS_STALLRINT	 (1<<0)
+
+#define DMAC_INT_CHE		 (1<<3)
+#define DMAC_INT_NFB		 (1<<1)
+#define DMAC_INT_STALL		 (1<<0)
diff --git a/arch/arm/mach-lh7a40x/include/mach/entry-macro.S b/arch/arm/mach-lh7a40x/include/mach/entry-macro.S
new file mode 100644
index 0000000..069bb4c
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/entry-macro.S
@@ -0,0 +1,149 @@
+/*
+ * arch/arm/mach-lh7a40x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for LH7A40x platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+/* In order to allow there to be support for both of the processor
+   classes at the same time, we make a hack here that isn't very
+   pretty.  At startup, the link pointed to with the
+   branch_irq_lh7a400 symbol is replaced with a NOP when the CPU is
+   detected as a lh7a404.
+
+   *** FIXME: we should clean this up so that there is only one
+	      implementation for each CPU's design.
+
+*/
+
+#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404)
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+branch_irq_lh7a400: b 1000f
+
+@ Implementation of the LH7A404 get_irqnr_and_base.
+
+		mov	\irqnr, #0			@ VIC1 irq base
+		mov	\base, #io_p2v(0x80000000)	@ APB registers
+		add	\base, \base, #0x8000
+		ldr	\tmp, [\base, #0x0030]		@ VIC1_VECTADDR
+		tst	\tmp, #VA_VECTORED		@ Direct vectored
+		bne	1002f
+		tst	\tmp, #VA_VIC1DEFAULT		@ Default vectored VIC1
+		ldrne	\irqstat, [\base, #0]		@ VIC1_IRQSTATUS
+		bne	1001f
+		add	\base, \base, #(0xa000 - 0x8000)
+		ldr	\tmp, [\base, #0x0030]		@ VIC2_VECTADDR
+		tst	\tmp, #VA_VECTORED		@ Direct vectored
+		bne	1002f
+		ldr	\irqstat, [\base, #0]		@ VIC2_IRQSTATUS
+		mov	\irqnr, #32			@ VIC2 irq base
+
+1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
+		bcs	1008f				@ Bit set; irq found
+		add	\irqnr, \irqnr, #1
+		bne	1001b				@ Until no bits
+		b	1009f				@ Nothing?  Hmm.
+1002:		and	\irqnr, \tmp, #0x3f		@ Mask for valid bits
+1008:		movs	\irqstat, #1			@ Force !Z
+		str	\tmp, [\base, #0x0030]		@ Clear vector
+		b	1009f
+
+@ Implementation of the LH7A400 get_irqnr_and_base.
+
+1000:		mov	\irqnr, #0
+		mov	\base, #io_p2v(0x80000000)	@ APB registers
+		ldr	\irqstat, [\base, #0x500]	@ PIC INTSR
+
+1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
+		bcs	1008f				@ Bit set; irq found
+		add	\irqnr, \irqnr, #1
+		bne	1001b				@ Until no bits
+		b	1009f				@ Nothing?  Hmm.
+1008:		movs	\irqstat, #1			@ Force !Z
+
+1009:
+               .endm
+
+
+
+#elif defined (CONFIG_ARCH_LH7A400)
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	\irqnr, #0
+		mov	\base, #io_p2v(0x80000000)	@ APB registers
+		ldr	\irqstat, [\base, #0x500]	@ PIC INTSR
+
+1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
+		bcs	1008f				@ Bit set; irq found
+		add	\irqnr, \irqnr, #1
+		bne	1001b				@ Until no bits
+		b	1009f				@ Nothing?  Hmm.
+1008:		movs	\irqstat, #1			@ Force !Z
+1009:
+               .endm
+
+#elif defined(CONFIG_ARCH_LH7A404)
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	\irqnr, #0			@ VIC1 irq base
+		mov	\base, #io_p2v(0x80000000)	@ APB registers
+		add	\base, \base, #0x8000
+		ldr	\tmp, [\base, #0x0030]		@ VIC1_VECTADDR
+		tst	\tmp, #VA_VECTORED		@ Direct vectored
+		bne	1002f
+		tst	\tmp, #VA_VIC1DEFAULT		@ Default vectored VIC1
+		ldrne	\irqstat, [\base, #0]		@ VIC1_IRQSTATUS
+		bne	1001f
+		add	\base, \base, #(0xa000 - 0x8000)
+		ldr	\tmp, [\base, #0x0030]		@ VIC2_VECTADDR
+		tst	\tmp, #VA_VECTORED		@ Direct vectored
+		bne	1002f
+		ldr	\irqstat, [\base, #0]		@ VIC2_IRQSTATUS
+		mov	\irqnr, #32			@ VIC2 irq base
+
+1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
+		bcs	1008f				@ Bit set; irq found
+		add	\irqnr, \irqnr, #1
+		bne	1001b				@ Until no bits
+		b	1009f				@ Nothing?  Hmm.
+1002:		and	\irqnr, \tmp, #0x3f		@ Mask for valid bits
+1008:		movs	\irqstat, #1			@ Force !Z
+		str	\tmp, [\base, #0x0030]		@ Clear vector
+1009:
+               .endm
+#endif
+
+
diff --git a/arch/arm/mach-lh7a40x/include/mach/hardware.h b/arch/arm/mach-lh7a40x/include/mach/hardware.h
new file mode 100644
index 0000000..48e827d
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/hardware.h
@@ -0,0 +1,62 @@
+/* arch/arm/mach-lh7a40x/include/mach/hardware.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  [ Substantially cribbed from arch/arm/mach-pxa/include/mach/hardware.h ]
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>		/* Added for the sake of amba-clcd driver */
+
+#define io_p2v(x) (0xf0000000 | (((x) & 0xfff00000) >> 4) | ((x) & 0x0000ffff))
+#define io_v2p(x) (             (((x) & 0x0fff0000) << 4) | ((x) & 0x0000ffff))
+
+#ifdef __ASSEMBLY__
+
+# define __REG(x)	io_p2v(x)
+# define __PREG(x)	io_v2p(x)
+
+#else
+
+# if 0
+#  define __REG(x)	(*((volatile u32 *)io_p2v(x)))
+# else
+/*
+ * This __REG() version gives the same results as the one above,  except
+ * that we are fooling gcc somehow so it generates far better and smaller
+ * assembly code for access to contigous registers.  It's a shame that gcc
+ * doesn't guess this by itself.
+ */
+#include <asm/types.h>
+typedef struct { volatile u32 offset[4096]; } __regbase;
+# define __REGP(x)	((__regbase *)((x)&~4095))->offset[((x)&4095)>>2]
+# define __REG(x)	__REGP(io_p2v(x))
+typedef struct { volatile u16 offset[4096]; } __regbase16;
+# define __REGP16(x)	((__regbase16 *)((x)&~4095))->offset[((x)&4095)>>1]
+# define __REG16(x)	__REGP16(io_p2v(x))
+typedef struct { volatile u8 offset[4096]; } __regbase8;
+# define __REGP8(x)	((__regbase8 *)((x)&~4095))->offset[(x)&4095]
+# define __REG8(x)	__REGP8(io_p2v(x))
+#endif
+
+/* Let's kick gcc's ass again... */
+# define __REG2(x,y)	\
+	( __builtin_constant_p(y) ? (__REG((x) + (y))) \
+				  : (*(volatile u32 *)((u32)&__REG(x) + (y))) )
+
+# define __PREG(x)	(io_v2p((u32)&(x)))
+
+#endif
+
+#define MASK_AND_SET(v,m,s)	(v) = ((v)&~(m))|(s)
+
+#include "registers.h"
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/io.h b/arch/arm/mach-lh7a40x/include/mach/io.h
new file mode 100644
index 0000000..031d26f
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/io.h
@@ -0,0 +1,22 @@
+/* arch/arm/mach-lh7a40x/include/mach/io.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/* No ISA or PCI bus on this machine. */
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif /* __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/irqs.h b/arch/arm/mach-lh7a40x/include/mach/irqs.h
new file mode 100644
index 0000000..0f9b836
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/irqs.h
@@ -0,0 +1,200 @@
+/* arch/arm/mach-lh7a40x/include/mach/irqs.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *  Copyright (C) 2004 Logic Product Development
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+/* It is to be seen whether or not we can build a kernel for more than
+ * one board.  For the time being, these macros assume that we cannot.
+ * Thus, it is OK to ifdef machine/board specific IRQ assignments.
+ */
+
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+
+#define FIQ_START	80
+
+#if defined (CONFIG_ARCH_LH7A400)
+
+  /* FIQs */
+
+# define IRQ_GPIO0FIQ	0	/* GPIO External FIQ Interrupt on F0 */
+# define IRQ_BLINT	1	/* Battery Low */
+# define IRQ_WEINT	2	/* Watchdog Timer, WDT overflow	*/
+# define IRQ_MCINT	3	/* Media Change, MEDCHG pin rising */
+
+  /* IRQs */
+
+# define IRQ_CSINT	4	/* Audio Codec (ACI) */
+# define IRQ_GPIO1INTR	5	/* GPIO External IRQ Interrupt on F1 */
+# define IRQ_GPIO2INTR	6	/* GPIO External IRQ Interrupt on F2 */
+# define IRQ_GPIO3INTR	7	/* GPIO External IRQ Interrupt on F3 */
+# define IRQ_T1UI	8	/* Timer 1 underflow */
+# define IRQ_T2UI	9	/* Timer 2 underflow */
+# define IRQ_RTCMI	10
+# define IRQ_TINTR	11	/* Clock State Controller 64 Hz tick (CSC) */
+# define IRQ_UART1INTR	12
+# define IRQ_UART2INTR	13
+# define IRQ_LCDINTR	14
+# define IRQ_SSIEOT	15	/* Synchronous Serial Interface (SSI) */
+# define IRQ_UART3INTR	16
+# define IRQ_SCIINTR	17	/* Smart Card Interface (SCI) */
+# define IRQ_AACINTR	18	/* Advanced Audio Codec (AAC) */
+# define IRQ_MMCINTR	19	/* Multimedia Card (MMC) */
+# define IRQ_USBINTR	20
+# define IRQ_DMAINTR	21
+# define IRQ_T3UI	22	/* Timer 3 underflow */
+# define IRQ_GPIO4INTR	23	/* GPIO External IRQ Interrupt on F4 */
+# define IRQ_GPIO5INTR	24	/* GPIO External IRQ Interrupt on F5 */
+# define IRQ_GPIO6INTR	25	/* GPIO External IRQ Interrupt on F6 */
+# define IRQ_GPIO7INTR	26	/* GPIO External IRQ Interrupt on F7 */
+# define IRQ_BMIINTR	27	/* Battery Monitor Interface (BMI) */
+
+# define NR_IRQ_CPU	28	/* IRQs directly recognized by CPU */
+
+	/* Given IRQ, return GPIO interrupt number 0-7 */
+# define IRQ_TO_GPIO(i)  ((i) \
+	- (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
+	- (((i) > IRQ_GPIO0INTR) ? IRQ_GPIO1INTR - IRQ_GPIO0INTR - 1 : 0))
+
+#endif
+
+#if defined (CONFIG_ARCH_LH7A404)
+
+# define IRQ_BROWN	0	/* Brownout */
+# define IRQ_WDTINTR	1	/* Watchdog Timer */
+# define IRQ_COMMRX	2	/* ARM Comm Rx for Debug */
+# define IRQ_COMMTX	3	/* ARM Comm Tx for Debug */
+# define IRQ_T1UI	4	/* Timer 1 underflow */
+# define IRQ_T2UI	5	/* Timer 2 underflow */
+# define IRQ_CSINT	6	/* Codec Interrupt (shared by AAC on 404) */
+# define IRQ_DMAM2P0	7	/* -- DMA Memory to Peripheral */
+# define IRQ_DMAM2P1	8
+# define IRQ_DMAM2P2	9
+# define IRQ_DMAM2P3	10
+# define IRQ_DMAM2P4	11
+# define IRQ_DMAM2P5	12
+# define IRQ_DMAM2P6	13
+# define IRQ_DMAM2P7	14
+# define IRQ_DMAM2P8	15
+# define IRQ_DMAM2P9	16
+# define IRQ_DMAM2M0	17	/* -- DMA Memory to Memory */
+# define IRQ_DMAM2M1	18
+# define IRQ_GPIO0INTR	19	/* -- GPIOF Interrupt */
+# define IRQ_GPIO1INTR	20
+# define IRQ_GPIO2INTR	21
+# define IRQ_GPIO3INTR	22
+# define IRQ_SOFT_V1_23	23	/* -- Unassigned */
+# define IRQ_SOFT_V1_24	24
+# define IRQ_SOFT_V1_25	25
+# define IRQ_SOFT_V1_26	26
+# define IRQ_SOFT_V1_27	27
+# define IRQ_SOFT_V1_28	28
+# define IRQ_SOFT_V1_29	29
+# define IRQ_SOFT_V1_30	30
+# define IRQ_SOFT_V1_31	31
+
+# define IRQ_BLINT	32	/* Battery Low */
+# define IRQ_BMIINTR	33	/* Battery Monitor */
+# define IRQ_MCINTR	34	/* Media Change */
+# define IRQ_TINTR	35	/* 64Hz Tick */
+# define IRQ_WEINT	36	/* Watchdog Expired */
+# define IRQ_RTCMI	37	/* Real-time Clock Match */
+# define IRQ_UART1INTR	38	/* UART1 Interrupt (including error) */
+# define IRQ_UART1ERR	39	/* UART1 Error */
+# define IRQ_UART2INTR	40	/* UART2 Interrupt (including error) */
+# define IRQ_UART2ERR	41	/* UART2 Error */
+# define IRQ_UART3INTR	42	/* UART3 Interrupt (including error) */
+# define IRQ_UART3ERR	43	/* UART3 Error */
+# define IRQ_SCIINTR	44	/* Smart Card */
+# define IRQ_TSCINTR	45	/* Touchscreen */
+# define IRQ_KMIINTR	46	/* Keyboard/Mouse (PS/2) */
+# define IRQ_GPIO4INTR	47	/* -- GPIOF Interrupt */
+# define IRQ_GPIO5INTR	48
+# define IRQ_GPIO6INTR	49
+# define IRQ_GPIO7INTR	50
+# define IRQ_T3UI	51	/* Timer 3 underflow */
+# define IRQ_LCDINTR	52	/* LCD Controller */
+# define IRQ_SSPINTR	53	/* Synchronous Serial Port */
+# define IRQ_SDINTR	54	/* Secure Digital Port (MMC) */
+# define IRQ_USBINTR	55	/* USB Device Port */
+# define IRQ_USHINTR	56	/* USB Host Port */
+# define IRQ_SOFT_V2_25	57	/* -- Unassigned */
+# define IRQ_SOFT_V2_26	58
+# define IRQ_SOFT_V2_27	59
+# define IRQ_SOFT_V2_28	60
+# define IRQ_SOFT_V2_29	61
+# define IRQ_SOFT_V2_30	62
+# define IRQ_SOFT_V2_31	63
+
+# define NR_IRQ_CPU	64	/* IRQs directly recognized by CPU */
+
+	/* Given IRQ, return GPIO interrupt number 0-7 */
+# define IRQ_TO_GPIO(i)  ((i) \
+	- (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
+	- IRQ_GPIO0INTR)
+
+			/* Vector Address constants */
+# define VA_VECTORED	0x100	/* Set for vectored interrupt */
+# define VA_VIC1DEFAULT	0x200	/* Set as default VECTADDR for VIC1 */
+# define VA_VIC2DEFAULT	0x400	/* Set as default VECTADDR for VIC2 */
+
+#endif
+
+  /* IRQ aliases */
+
+#if !defined (IRQ_GPIO0INTR)
+# define IRQ_GPIO0INTR	IRQ_GPIO0FIQ
+#endif
+#define IRQ_TICK	IRQ_TINTR
+#define IRQ_PCC1_RDY	IRQ_GPIO6INTR	/* PCCard 1 ready */
+#define IRQ_PCC2_RDY	IRQ_GPIO7INTR	/* PCCard 2 ready */
+#define IRQ_USB		IRQ_USBINTR	/* USB device */
+
+#ifdef CONFIG_MACH_KEV7A400
+# define IRQ_TS		IRQ_GPIOFIQ	/* Touchscreen */
+# define IRQ_CPLD	IRQ_GPIO1INTR	/* CPLD cascade */
+# define IRQ_PCC1_CD	IRQ_GPIO_F2	/* PCCard 1 card detect */
+# define IRQ_PCC2_CD	IRQ_GPIO_F3	/* PCCard 2 card detect */
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+# define IRQ_CPLD_V28	IRQ_GPIO7INTR	/* CPLD cascade through GPIO_PF7 */
+# define IRQ_CPLD_V34	IRQ_GPIO3INTR	/* CPLD cascade through GPIO_PF3 */
+#endif
+
+  /* System specific IRQs */
+
+#define IRQ_BOARD_START NR_IRQ_CPU
+
+#ifdef CONFIG_MACH_KEV7A400
+# define IRQ_KEV7A400_CPLD	IRQ_BOARD_START
+# define NR_IRQ_BOARD		5
+# define IRQ_KEV7A400_MMC_CD	IRQ_KEV7A400_CPLD + 0	/* MMC Card Detect */
+# define IRQ_KEV7A400_RI2	IRQ_KEV7A400_CPLD + 1	/* Ring Indicator 2 */
+# define IRQ_KEV7A400_IDE_CF	IRQ_KEV7A400_CPLD + 2	/* Compact Flash (?) */
+# define IRQ_KEV7A400_ETH_INT	IRQ_KEV7A400_CPLD + 3	/* Ethernet chip */
+# define IRQ_KEV7A400_INT	IRQ_KEV7A400_CPLD + 4
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+# define IRQ_LPD7A40X_CPLD	IRQ_BOARD_START
+# define NR_IRQ_BOARD		2
+# define IRQ_LPD7A40X_ETH_INT	IRQ_LPD7A40X_CPLD + 0	/* Ethernet chip */
+# define IRQ_LPD7A400_TS	IRQ_LPD7A40X_CPLD + 1	/* Touch screen */
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400)
+# define IRQ_TOUCH		IRQ_LPD7A400_TS
+#endif
+
+#define NR_IRQS		(NR_IRQ_CPU + NR_IRQ_BOARD)
+
+#endif
diff --git a/arch/arm/mach-lh7a40x/include/mach/memory.h b/arch/arm/mach-lh7a40x/include/mach/memory.h
new file mode 100644
index 0000000..f7107b4
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/memory.h
@@ -0,0 +1,76 @@
+/* arch/arm/mach-lh7a40x/include/mach/memory.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ *
+ *  Refer to <file:Documentation/arm/Sharp-LH/SDRAM> for more information.
+ *
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0xc0000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	 __virt_to_phys(x)
+#define __bus_to_virt(x)	 __phys_to_virt(x)
+
+#ifdef CONFIG_DISCONTIGMEM
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+
+# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
+#  define KVADDR_TO_NID(addr) \
+  (  ((((unsigned long) (addr) - PAGE_OFFSET) >> 24) &  1)\
+   | ((((unsigned long) (addr) - PAGE_OFFSET) >> 25) & ~1))
+# else  /* 2 banks per node */
+#  define KVADDR_TO_NID(addr) \
+      (((unsigned long) (addr) - PAGE_OFFSET) >> 26)
+# endif
+
+/*
+ * Given a page frame number, convert it to a node id.
+ */
+
+# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
+#  define PFN_TO_NID(pfn) \
+  (((((pfn) - PHYS_PFN_OFFSET) >> (24 - PAGE_SHIFT)) &  1)\
+ | ((((pfn) - PHYS_PFN_OFFSET) >> (25 - PAGE_SHIFT)) & ~1))
+# else  /* 2 banks per node */
+#  define PFN_TO_NID(pfn) \
+    (((pfn) - PHYS_PFN_OFFSET) >> (26 - PAGE_SHIFT))
+#endif
+
+/*
+ * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
+ * and returns the index corresponding to the appropriate page in the
+ * node's mem_map.
+ */
+
+# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
+#  define LOCAL_MAP_NR(addr) \
+       (((unsigned long)(addr) & 0x003fffff) >> PAGE_SHIFT)
+# else  /* 2 banks per node */
+#  define LOCAL_MAP_NR(addr) \
+       (((unsigned long)(addr) & 0x01ffffff) >> PAGE_SHIFT)
+# endif
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-lh7a40x/include/mach/registers.h b/arch/arm/mach-lh7a40x/include/mach/registers.h
new file mode 100644
index 0000000..ea44396
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/registers.h
@@ -0,0 +1,224 @@
+/* arch/arm/mach-lh7a40x/include/mach/registers.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *  Copyright (C) 2004 Logic Product Development
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/constants.h>
+
+#ifndef __ASM_ARCH_REGISTERS_H
+#define __ASM_ARCH_REGISTERS_H
+
+
+	/* Physical register base addresses */
+
+#define AC97C_PHYS	(0x80000000)	/* AC97 Controller */
+#define MMC_PHYS	(0x80000100)	/* Multimedia Card Controller */
+#define USB_PHYS	(0x80000200)	/* USB Client */
+#define SCI_PHYS	(0x80000300)	/* Secure Card Interface */
+#define CSC_PHYS	(0x80000400)	/* Clock/State Controller  */
+#define INTC_PHYS	(0x80000500)	/* Interrupt Controller */
+#define UART1_PHYS	(0x80000600)	/* UART1 Controller */
+#define SIR_PHYS	(0x80000600)	/* IR Controller, same are UART1 */
+#define UART2_PHYS	(0x80000700)	/* UART2 Controller */
+#define UART3_PHYS	(0x80000800)	/* UART3 Controller */
+#define DCDC_PHYS	(0x80000900)	/* DC to DC Controller */
+#define ACI_PHYS	(0x80000a00)	/* Audio Codec Interface */
+#define SSP_PHYS	(0x80000b00)	/* Synchronous ... */
+#define TIMER_PHYS	(0x80000c00)	/* Timer Controller */
+#define RTC_PHYS	(0x80000d00)	/* Real-time Clock */
+#define GPIO_PHYS	(0x80000e00)	/* General Purpose IO */
+#define BMI_PHYS	(0x80000f00)	/* Battery Monitor Interface */
+#define HRTFTC_PHYS	(0x80001000)	/* High-res TFT Controller (LH7A400) */
+#define ALI_PHYS	(0x80001000)	/* Advanced LCD Interface (LH7A404) */
+#define WDT_PHYS	(0x80001400)	/* Watchdog Timer */
+#define SMC_PHYS	(0x80002000)	/* Static Memory Controller */
+#define SDRC_PHYS	(0x80002400)	/* SDRAM Controller */
+#define DMAC_PHYS	(0x80002800)	/* DMA Controller */
+#define CLCDC_PHYS	(0x80003000)	/* Color LCD Controller */
+
+	/* Physical registers of the LH7A404 */
+
+#define ADC_PHYS	(0x80001300)	/* A/D & Touchscreen Controller */
+#define VIC1_PHYS	(0x80008000)	/* Vectored Interrupt Controller 1 */
+#define USBH_PHYS	(0x80009000)	/* USB OHCI host controller */
+#define VIC2_PHYS	(0x8000a000)	/* Vectored Interrupt Controller 2 */
+
+/*#define KBD_PHYS	(0x80000e00) */
+/*#define LCDICP_PHYS	(0x80001000) */
+
+
+	/* Clock/State Controller register */
+
+#define CSC_PWRSR	__REG(CSC_PHYS + 0x00) /* Reset register & ID */
+#define CSC_PWRCNT	__REG(CSC_PHYS + 0x04) /* Power control */
+#define CSC_CLKSET	__REG(CSC_PHYS + 0x20) /* Clock speed control */
+#define CSC_USBDRESET	__REG(CSC_PHYS + 0x4c) /* USB Device resets */
+
+#define CSC_PWRCNT_USBH_EN	(1<<28)	/* USB Host power enable */
+#define CSC_PWRCNT_DMAC_M2M1_EN	(1<<27)
+#define CSC_PWRCNT_DMAC_M2M0_EN	(1<<26)
+#define CSC_PWRCNT_DMAC_M2P8_EN	(1<<25)
+#define CSC_PWRCNT_DMAC_M2P9_EN	(1<<24)
+#define CSC_PWRCNT_DMAC_M2P6_EN	(1<<23)
+#define CSC_PWRCNT_DMAC_M2P7_EN	(1<<22)
+#define CSC_PWRCNT_DMAC_M2P4_EN	(1<<21)
+#define CSC_PWRCNT_DMAC_M2P5_EN	(1<<20)
+#define CSC_PWRCNT_DMAC_M2P2_EN	(1<<19)
+#define CSC_PWRCNT_DMAC_M2P3_EN	(1<<18)
+#define CSC_PWRCNT_DMAC_M2P0_EN	(1<<17)
+#define CSC_PWRCNT_DMAC_M2P1_EN	(1<<16)
+
+#define CSC_PWRSR_CHIPMAN_SHIFT	(24)
+#define CSC_PWRSR_CHIPMAN_MASK	(0xff)
+#define CSC_PWRSR_CHIPID_SHIFT	(16)
+#define CSC_PWRSR_CHIPID_MASK	(0xff)
+
+#define CSC_USBDRESET_APBRESETREG	(1<<1)
+#define CSC_USBDRESET_IORESETREG	(1<<0)
+
+	/* Interrupt Controller registers */
+
+#define INTC_INTSR	__REG(INTC_PHYS + 0x00)	/* Status */
+#define INTC_INTRSR	__REG(INTC_PHYS + 0x04)	/* Raw Status */
+#define INTC_INTENS	__REG(INTC_PHYS + 0x08)	/* Enable Set */
+#define INTC_INTENC	__REG(INTC_PHYS + 0x0c)	/* Enable Clear */
+
+
+	/* Vectored Interrupted Controller registers */
+
+#define VIC1_IRQSTATUS	__REG(VIC1_PHYS + 0x00)
+#define VIC1_FIQSTATUS	__REG(VIC1_PHYS + 0x04)
+#define VIC1_RAWINTR	__REG(VIC1_PHYS + 0x08)
+#define VIC1_INTSEL	__REG(VIC1_PHYS + 0x0c)
+#define VIC1_INTEN	__REG(VIC1_PHYS + 0x10)
+#define VIC1_INTENCLR	__REG(VIC1_PHYS + 0x14)
+#define VIC1_SOFTINT	__REG(VIC1_PHYS + 0x18)
+#define VIC1_SOFTINTCLR	__REG(VIC1_PHYS + 0x1c)
+#define VIC1_PROTECT	__REG(VIC1_PHYS + 0x20)
+#define VIC1_VECTADDR	__REG(VIC1_PHYS + 0x30)
+#define VIC1_NVADDR	__REG(VIC1_PHYS + 0x34)
+#define VIC1_VAD0	__REG(VIC1_PHYS + 0x100)
+#define VIC1_VECTCNTL0	__REG(VIC1_PHYS + 0x200)
+#define VIC2_IRQSTATUS	__REG(VIC2_PHYS + 0x00)
+#define VIC2_FIQSTATUS	__REG(VIC2_PHYS + 0x04)
+#define VIC2_RAWINTR	__REG(VIC2_PHYS + 0x08)
+#define VIC2_INTSEL	__REG(VIC2_PHYS + 0x0c)
+#define VIC2_INTEN	__REG(VIC2_PHYS + 0x10)
+#define VIC2_INTENCLR	__REG(VIC2_PHYS + 0x14)
+#define VIC2_SOFTINT	__REG(VIC2_PHYS + 0x18)
+#define VIC2_SOFTINTCLR	__REG(VIC2_PHYS + 0x1c)
+#define VIC2_PROTECT	__REG(VIC2_PHYS + 0x20)
+#define VIC2_VECTADDR	__REG(VIC2_PHYS + 0x30)
+#define VIC2_NVADDR	__REG(VIC2_PHYS + 0x34)
+#define VIC2_VAD0	__REG(VIC2_PHYS + 0x100)
+#define VIC2_VECTCNTL0	__REG(VIC2_PHYS + 0x200)
+
+#define VIC_CNTL_ENABLE	(0x20)
+
+	/* USB Host registers (Open HCI compatible) */
+
+#define USBH_CMDSTATUS	__REG(USBH_PHYS + 0x08)
+
+
+	/* GPIO registers */
+
+#define GPIO_INTTYPE1	__REG(GPIO_PHYS + 0x4c)	/* Interrupt Type 1 (Edge) */
+#define GPIO_INTTYPE2	__REG(GPIO_PHYS + 0x50)	/* Interrupt Type 2 */
+#define GPIO_GPIOFEOI	__REG(GPIO_PHYS + 0x54)	/* GPIO End-of-Interrupt */
+#define GPIO_GPIOINTEN	__REG(GPIO_PHYS + 0x58)	/* GPIO Interrupt Enable */
+#define GPIO_INTSTATUS	__REG(GPIO_PHYS + 0x5c)	/* GPIO Interrupt Status */
+#define GPIO_PINMUX	__REG(GPIO_PHYS + 0x2c)
+#define GPIO_PADD	__REG(GPIO_PHYS + 0x10)
+#define GPIO_PAD	__REG(GPIO_PHYS + 0x00)
+#define GPIO_PCD	__REG(GPIO_PHYS + 0x08)
+#define GPIO_PCDD	__REG(GPIO_PHYS + 0x18)
+#define GPIO_PEDD	__REG(GPIO_PHYS + 0x24)
+#define GPIO_PED	__REG(GPIO_PHYS + 0x20)
+
+
+	/* Static Memory Controller registers */
+
+#define SMC_BCR0	__REG(SMC_PHYS + 0x00)	/* Bank 0 Configuration */
+#define SMC_BCR1	__REG(SMC_PHYS + 0x04)	/* Bank 1 Configuration */
+#define SMC_BCR2	__REG(SMC_PHYS + 0x08)	/* Bank 2 Configuration */
+#define SMC_BCR3	__REG(SMC_PHYS + 0x0C)	/* Bank 3 Configuration */
+#define SMC_BCR6	__REG(SMC_PHYS + 0x18)	/* Bank 6 Configuration */
+#define SMC_BCR7	__REG(SMC_PHYS + 0x1c)	/* Bank 7 Configuration */
+
+
+#ifdef CONFIG_MACH_KEV7A400
+# define CPLD_RD_OPT_DIP_SW	__REG16(CPLD_PHYS + 0x00) /* Read Option SW */
+# define CPLD_WR_IO_BRD_CTL	__REG16(CPLD_PHYS + 0x00) /* Write Control */
+# define CPLD_RD_PB_KEYS	__REG16(CPLD_PHYS + 0x02) /* Read Btn Keys */
+# define CPLD_LATCHED_INTS	__REG16(CPLD_PHYS + 0x04) /* Read INTR stat. */
+# define CPLD_CL_INT		__REG16(CPLD_PHYS + 0x04) /* Clear INTR stat */
+# define CPLD_BOOT_MMC_STATUS	__REG16(CPLD_PHYS + 0x06) /* R/O */
+# define CPLD_RD_KPD_ROW_SENSE	__REG16(CPLD_PHYS + 0x08)
+# define CPLD_WR_PB_INT_MASK	__REG16(CPLD_PHYS + 0x08)
+# define CPLD_RD_BRD_DISP_SW	__REG16(CPLD_PHYS + 0x0a)
+# define CPLD_WR_EXT_INT_MASK	__REG16(CPLD_PHYS + 0x0a)
+# define CPLD_LCD_PWR_CNTL	__REG16(CPLD_PHYS + 0x0c)
+# define CPLD_SEVEN_SEG		__REG16(CPLD_PHYS + 0x0e) /* 7 seg. LED mask */
+
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+
+# define CPLD_CONTROL		__REG16(CPLD02_PHYS)
+# define CPLD_SPI_DATA		__REG16(CPLD06_PHYS)
+# define CPLD_SPI_CONTROL	__REG16(CPLD08_PHYS)
+# define CPLD_SPI_EEPROM	__REG16(CPLD0A_PHYS)
+# define CPLD_INTERRUPTS	__REG16(CPLD0C_PHYS) /* IRQ mask/status */
+# define CPLD_BOOT_MODE		__REG16(CPLD0E_PHYS)
+# define CPLD_FLASH		__REG16(CPLD10_PHYS)
+# define CPLD_POWER_MGMT	__REG16(CPLD12_PHYS)
+# define CPLD_REVISION		__REG16(CPLD14_PHYS)
+# define CPLD_GPIO_EXT		__REG16(CPLD16_PHYS)
+# define CPLD_GPIO_DATA		__REG16(CPLD18_PHYS)
+# define CPLD_GPIO_DIR		__REG16(CPLD1A_PHYS)
+
+#endif
+
+	/* Timer registers */
+
+#define TIMER_LOAD1	__REG(TIMER_PHYS + 0x00) /* Timer 1 initial value */
+#define TIMER_VALUE1	__REG(TIMER_PHYS + 0x04) /* Timer 1 current value */
+#define TIMER_CONTROL1	__REG(TIMER_PHYS + 0x08) /* Timer 1 control word */
+#define TIMER_EOI1	__REG(TIMER_PHYS + 0x0c) /* Timer 1 interrupt clear */
+
+#define TIMER_LOAD2	__REG(TIMER_PHYS + 0x20) /* Timer 2 initial value */
+#define TIMER_VALUE2	__REG(TIMER_PHYS + 0x24) /* Timer 2 current value */
+#define TIMER_CONTROL2	__REG(TIMER_PHYS + 0x28) /* Timer 2 control word */
+#define TIMER_EOI2	__REG(TIMER_PHYS + 0x2c) /* Timer 2 interrupt clear */
+
+#define TIMER_BUZZCON	__REG(TIMER_PHYS + 0x40) /* Buzzer configuration */
+
+#define TIMER_LOAD3	__REG(TIMER_PHYS + 0x80) /* Timer 3 initial value */
+#define TIMER_VALUE3	__REG(TIMER_PHYS + 0x84) /* Timer 3 current value */
+#define TIMER_CONTROL3	__REG(TIMER_PHYS + 0x88) /* Timer 3 control word */
+#define TIMER_EOI3	__REG(TIMER_PHYS + 0x8c) /* Timer 3 interrupt clear */
+
+#define TIMER_C_ENABLE		(1<<7)
+#define TIMER_C_PERIODIC	(1<<6)
+#define TIMER_C_FREERUNNING	(0)
+#define TIMER_C_2KHZ		(0x00)		/* 1.986 kHz */
+#define TIMER_C_508KHZ		(0x08)
+
+	/* GPIO registers */
+
+#define GPIO_PFDD		__REG(GPIO_PHYS + 0x34)	/* PF direction */
+#define GPIO_INTTYPE1		__REG(GPIO_PHYS + 0x4c)	/* IRQ edge or lvl  */
+#define GPIO_INTTYPE2		__REG(GPIO_PHYS + 0x50)	/* IRQ activ hi/lo */
+#define GPIO_GPIOFEOI		__REG(GPIO_PHYS + 0x54)	/* GPIOF end of IRQ */
+#define GPIO_GPIOFINTEN		__REG(GPIO_PHYS + 0x58)	/* GPIOF IRQ enable */
+#define GPIO_INTSTATUS		__REG(GPIO_PHYS + 0x5c)	/* GPIOF IRQ latch */
+#define GPIO_RAWINTSTATUS	__REG(GPIO_PHYS + 0x60)	/* GPIOF IRQ raw */
+
+
+#endif  /* _ASM_ARCH_REGISTERS_H */
diff --git a/include/asm-arm/arch-lh7a40x/ssp.h b/arch/arm/mach-lh7a40x/include/mach/ssp.h
similarity index 100%
rename from include/asm-arm/arch-lh7a40x/ssp.h
rename to arch/arm/mach-lh7a40x/include/mach/ssp.h
diff --git a/arch/arm/mach-lh7a40x/include/mach/system.h b/arch/arm/mach-lh7a40x/include/mach/system.h
new file mode 100644
index 0000000..fa46bb1e
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/system.h
@@ -0,0 +1,19 @@
+/* arch/arm/mach-lh7a40x/include/mach/system.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle ();
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset (0);
+}
diff --git a/arch/arm/mach-lh7a40x/include/mach/timex.h b/arch/arm/mach-lh7a40x/include/mach/timex.h
new file mode 100644
index 0000000..08028ce
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/timex.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-lh7a40x/include/mach/timex.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/constants.h>
+
+#define CLOCK_TICK_RATE		(PLL_CLOCK/6/16)
+
+/*
+#define CLOCK_TICK_RATE		3686400
+*/
diff --git a/arch/arm/mach-lh7a40x/include/mach/uncompress.h b/arch/arm/mach-lh7a40x/include/mach/uncompress.h
new file mode 100644
index 0000000..55b80d479
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/uncompress.h
@@ -0,0 +1,38 @@
+/* arch/arm/mach-lh7a40x/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/registers.h>
+
+#ifndef UART_R_DATA
+# define UART_R_DATA	(0x00)
+#endif
+#ifndef UART_R_STATUS
+# define UART_R_STATUS	(0x10)
+#endif
+#define nTxRdy		(0x20)	/* Not TxReady (literally Tx FIFO full) */
+
+	/* Access UART with physical addresses before MMU is setup */
+#define UART_STATUS (*(volatile unsigned long*) (UART2_PHYS + UART_R_STATUS))
+#define UART_DATA   (*(volatile unsigned long*) (UART2_PHYS + UART_R_DATA))
+
+static inline void putc(int ch)
+{
+	while (UART_STATUS & nTxRdy)
+		barrier();
+	UART_DATA = ch;
+}
+
+static inline void flush(void)
+{
+}
+
+	/* NULL functions; we don't presently need them */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-lh7a40x/include/mach/vmalloc.h b/arch/arm/mach-lh7a40x/include/mach/vmalloc.h
new file mode 100644
index 0000000..3fbd494
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/* arch/arm/mach-lh7a40x/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+#define VMALLOC_END       (0xe8000000)
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a400.c b/arch/arm/mach-lh7a40x/irq-lh7a400.c
index 0e5a805..1ad3afc 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a400.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a400.c
@@ -12,10 +12,10 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a404.c b/arch/arm/mach-lh7a40x/irq-lh7a404.c
index f3293bf..12b045b 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a404.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a404.c
@@ -12,10 +12,10 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
index 41bf9f8..0d5063eb 100644
--- a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
@@ -13,10 +13,10 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-lh7a40x/ssp-cpld.c b/arch/arm/mach-lh7a40x/ssp-cpld.c
index 4cd31bb..51fbef9 100644
--- a/arch/arm/mach-lh7a40x/ssp-cpld.c
+++ b/arch/arm/mach-lh7a40x/ssp-cpld.c
@@ -46,9 +46,9 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/ssp.h>
+#include <mach/ssp.h>
 
 //#define TALK
 
diff --git a/arch/arm/mach-lh7a40x/time.c b/arch/arm/mach-lh7a40x/time.c
index 1c7e469..7fe9e06 100644
--- a/arch/arm/mach-lh7a40x/time.c
+++ b/arch/arm/mach-lh7a40x/time.c
@@ -14,7 +14,7 @@
 #include <linux/irq.h>
 #include <linux/time.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
diff --git a/arch/arm/mach-loki/addr-map.c b/arch/arm/mach-loki/addr-map.c
index 3b6319d..70ca56b 100644
--- a/arch/arm/mach-loki/addr-map.c
+++ b/arch/arm/mach-loki/addr-map.c
@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mbus.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-loki/common.c b/arch/arm/mach-loki/common.c
index 410f503..e20cdbc 100644
--- a/arch/arm/mach-loki/common.c
+++ b/arch/arm/mach-loki/common.c
@@ -18,7 +18,7 @@
 #include <asm/timex.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/arch/loki.h>
+#include <mach/loki.h>
 #include <asm/plat-orion/orion_nand.h>
 #include <asm/plat-orion/time.h>
 #include "common.h"
diff --git a/arch/arm/mach-loki/include/mach/debug-macro.S b/arch/arm/mach-loki/include/mach/debug-macro.S
new file mode 100644
index 0000000..a8c20bd
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-loki/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/loki.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =LOKI_REGS_PHYS_BASE
+	ldrne	\rx, =LOKI_REGS_VIRT_BASE
+	orr	\rx, \rx, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-kirkwood/dma.h b/arch/arm/mach-loki/include/mach/dma.h
similarity index 100%
copy from include/asm-arm/arch-kirkwood/dma.h
copy to arch/arm/mach-loki/include/mach/dma.h
diff --git a/arch/arm/mach-loki/include/mach/entry-macro.S b/arch/arm/mach-loki/include/mach/entry-macro.S
new file mode 100644
index 0000000..332af38
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/entry-macro.S
@@ -0,0 +1,30 @@
+/*
+ * arch/arm/mach-loki/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Loki (88RC8480) platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/loki.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =IRQ_VIRT_BASE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\irqstat, [\base, #IRQ_CAUSE_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_OFF]
+	mov	\irqnr, #0
+	ands	\irqstat, \irqstat, \tmp
+	clzne	\irqnr, \irqstat
+	rsbne	\irqnr, \irqnr, #31
+	.endm
diff --git a/arch/arm/mach-loki/include/mach/hardware.h b/arch/arm/mach-loki/include/mach/hardware.h
new file mode 100644
index 0000000..d7bfc8f
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/hardware.h
@@ -0,0 +1,15 @@
+/*
+ * arch/arm/mach-loki/include/mach/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "loki.h"
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/io.h b/arch/arm/mach-loki/include/mach/io.h
new file mode 100644
index 0000000..a373cd5
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/io.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-loki/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "loki.h"
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)((addr - LOKI_PCIE0_IO_PHYS_BASE)
+					+ LOKI_PCIE0_IO_VIRT_BASE);
+}
+
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/irqs.h b/arch/arm/mach-loki/include/mach/irqs.h
new file mode 100644
index 0000000..9fbd332
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/irqs.h
@@ -0,0 +1,58 @@
+/*
+ * arch/arm/mach-loki/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell Loki (88RC8480) SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "loki.h"	/* need GPIO_MAX */
+
+/*
+ * Interrupt Controller
+ */
+#define IRQ_LOKI_PCIE_A_CPU_DRBL	0
+#define IRQ_LOKI_CPU_PCIE_A_DRBL	1
+#define IRQ_LOKI_PCIE_B_CPU_DRBL	2
+#define IRQ_LOKI_CPU_PCIE_B_DRBL	3
+#define IRQ_LOKI_COM_A_ERR		6
+#define IRQ_LOKI_COM_A_IN		7
+#define IRQ_LOKI_COM_A_OUT		8
+#define IRQ_LOKI_COM_B_ERR		9
+#define IRQ_LOKI_COM_B_IN		10
+#define IRQ_LOKI_COM_B_OUT		11
+#define IRQ_LOKI_DMA_A			12
+#define IRQ_LOKI_DMA_B			13
+#define IRQ_LOKI_SAS_A			14
+#define IRQ_LOKI_SAS_B			15
+#define IRQ_LOKI_DDR			16
+#define IRQ_LOKI_XOR			17
+#define IRQ_LOKI_BRIDGE			18
+#define IRQ_LOKI_PCIE_A_ERR		20
+#define IRQ_LOKI_PCIE_A_INT		21
+#define IRQ_LOKI_PCIE_B_ERR		22
+#define IRQ_LOKI_PCIE_B_INT		23
+#define IRQ_LOKI_GBE_A_INT		24
+#define IRQ_LOKI_GBE_B_INT		25
+#define IRQ_LOKI_DEV_ERR		26
+#define IRQ_LOKI_UART0			27
+#define IRQ_LOKI_UART1			28
+#define IRQ_LOKI_TWSI			29
+#define IRQ_LOKI_GPIO_23_0		30
+#define IRQ_LOKI_GPIO_25_24		31
+
+/*
+ * Loki General Purpose Pins
+ */
+#define IRQ_LOKI_GPIO_START	32
+#define NR_GPIO_IRQS		GPIO_MAX
+
+#define NR_IRQS			(IRQ_LOKI_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/loki.h b/arch/arm/mach-loki/include/mach/loki.h
new file mode 100644
index 0000000..c00af6b
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/loki.h
@@ -0,0 +1,97 @@
+/*
+ * arch/arm/mach-loki/include/mach/loki.h
+ *
+ * Generic definitions for Marvell Loki (88RC8480) SoC flavors
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_LOKI_H
+#define __ASM_ARCH_LOKI_H
+
+/*
+ * Marvell Loki (88RC8480) address maps.
+ *
+ * phys
+ * d0000000	on-chip peripheral registers
+ * e0000000	PCIe 0 Memory space
+ * e8000000	PCIe 1 Memory space
+ * f0000000	PCIe 0 I/O space
+ * f0100000	PCIe 1 I/O space
+ *
+ * virt		phys		size
+ * fed00000	d0000000	1M	on-chip peripheral registers
+ * fee00000	f0000000	64K	PCIe 0 I/O space
+ * fef00000	f0100000	64K	PCIe 1 I/O space
+ */
+
+#define LOKI_REGS_PHYS_BASE		0xd0000000
+#define LOKI_REGS_VIRT_BASE		0xfed00000
+#define LOKI_REGS_SIZE			SZ_1M
+
+#define LOKI_PCIE0_IO_PHYS_BASE		0xf0000000
+#define LOKI_PCIE0_IO_VIRT_BASE		0xfee00000
+#define LOKI_PCIE0_IO_BUS_BASE		0x00000000
+#define LOKI_PCIE0_IO_SIZE		SZ_64K
+
+#define LOKI_PCIE1_IO_PHYS_BASE		0xf0100000
+#define LOKI_PCIE1_IO_VIRT_BASE		0xfef00000
+#define LOKI_PCIE1_IO_BUS_BASE		0x00000000
+#define LOKI_PCIE1_IO_SIZE		SZ_64K
+
+#define LOKI_PCIE0_MEM_PHYS_BASE	0xe0000000
+#define LOKI_PCIE0_MEM_SIZE		SZ_128M
+
+#define LOKI_PCIE1_MEM_PHYS_BASE	0xe8000000
+#define LOKI_PCIE1_MEM_SIZE		SZ_128M
+
+/*
+ * Register Map
+ */
+#define DEV_BUS_PHYS_BASE	(LOKI_REGS_PHYS_BASE | 0x10000)
+#define DEV_BUS_VIRT_BASE	(LOKI_REGS_VIRT_BASE | 0x10000)
+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
+
+#define BRIDGE_VIRT_BASE	(LOKI_REGS_VIRT_BASE | 0x20000)
+#define  BRIDGE_REG(x)		(BRIDGE_VIRT_BASE | (x))
+#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define   SOFT_RESET_OUT_EN	0x00000004
+#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define   SOFT_RESET		0x00000001
+#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define   BRIDGE_INT_TIMER0	0x0002
+#define   BRIDGE_INT_TIMER1	0x0004
+#define   BRIDGE_INT_TIMER1_CLR	0x0004
+#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define   IRQ_CAUSE_OFF		0x0000
+#define   IRQ_MASK_OFF		0x0004
+#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
+
+#define PCIE0_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0x30000)
+
+#define PCIE1_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0x40000)
+
+#define SAS0_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0x80000)
+
+#define SAS1_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0x90000)
+
+#define GE0_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0xa0000)
+#define GE0_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0xa0000)
+
+#define GE1_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0xb0000)
+#define GE1_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0xb0000)
+
+#define DDR_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0xf0000)
+#define DDR_REG(x)		(DDR_VIRT_BASE | (x))
+
+
+#define GPIO_MAX		8
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/memory.h b/arch/arm/mach-loki/include/mach/memory.h
new file mode 100644
index 0000000..a39533a
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-loki/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x00000000)
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/system.h b/arch/arm/mach-loki/include/mach/system.h
new file mode 100644
index 0000000..8db1147
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/system.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-loki/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/loki.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/timex.h b/arch/arm/mach-loki/include/mach/timex.h
new file mode 100644
index 0000000..9df2109
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/timex.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/mach-loki/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)
+
+#define LOKI_TCLK		180000000
diff --git a/arch/arm/mach-loki/include/mach/uncompress.h b/arch/arm/mach-loki/include/mach/uncompress.h
new file mode 100644
index 0000000..90b2a7e
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-loki/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/loki.h>
+
+#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+	unsigned char *base = SERIAL_BASE;
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		if (base[UART_LSR << 2] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+	unsigned char *base = SERIAL_BASE;
+	unsigned char mask;
+	int i;
+
+	mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+	for (i = 0; i < 0x1000; i++) {
+		if ((base[UART_LSR << 2] & mask) == mask)
+			break;
+		barrier();
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-loki/include/mach/vmalloc.h b/arch/arm/mach-loki/include/mach/vmalloc.h
new file mode 100644
index 0000000..8dc3bfc
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-loki/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe800000
diff --git a/arch/arm/mach-loki/lb88rc8480-setup.c b/arch/arm/mach-loki/lb88rc8480-setup.c
index d1b9e6e..2cc9ac9 100644
--- a/arch/arm/mach-loki/lb88rc8480-setup.c
+++ b/arch/arm/mach-loki/lb88rc8480-setup.c
@@ -19,7 +19,7 @@
 #include <linux/mv643xx_eth.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/loki.h>
+#include <mach/loki.h>
 #include "common.h"
 
 #define LB88RC8480_FLASH_BOOT_CS_BASE	0xf8000000
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 4646021..995afc4a 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -19,14 +19,14 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/msm_iomap.h>
+#include <mach/board.h>
+#include <mach/msm_iomap.h>
 
 #include <asm/io.h>
 #include <asm/delay.h>
diff --git a/arch/arm/mach-msm/common.c b/arch/arm/mach-msm/common.c
index 3f5d3362..3a51136 100644
--- a/arch/arm/mach-msm/common.c
+++ b/arch/arm/mach-msm/common.c
@@ -28,9 +28,9 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
 
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 struct flash_platform_data msm_nand_data = {
 	.parts		= 0,
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
index 8b0f339..9de0826 100644
--- a/arch/arm/mach-msm/dma.c
+++ b/arch/arm/mach-msm/dma.c
@@ -15,7 +15,7 @@
 
 #include <asm/io.h>
 #include <linux/interrupt.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 #define MSM_DMOV_CHANNEL_COUNT 16
 
diff --git a/arch/arm/mach-msm/idle.S b/arch/arm/mach-msm/idle.S
index 2b1cb7f..6a94f05 100644
--- a/arch/arm/mach-msm/idle.S
+++ b/arch/arm/mach-msm/idle.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-msm/idle.S
+/* arch/arm/mach-msm/include/mach/idle.S
  *
  * Idle processing for MSM7K - work around bugs with SWFI.
  *
diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h
new file mode 100644
index 0000000..a763949
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/board.h
@@ -0,0 +1,37 @@
+/* arch/arm/mach-msm/include/mach/board.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_BOARD_H
+#define __ASM_ARCH_MSM_BOARD_H
+
+#include <linux/types.h>
+
+/* platform device data structures */
+
+struct msm_mddi_platform_data
+{
+	void (*panel_power)(int on);
+	unsigned has_vsync_irq:1;
+};
+
+/* common init routines for use by arch/arm/mach-msm/board-*.c */
+
+void __init msm_add_devices(void);
+void __init msm_map_common_io(void);
+void __init msm_init_irq(void);
+void __init msm_init_gpio(void);
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
new file mode 100644
index 0000000..528eef4
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -0,0 +1,40 @@
+/* arch/arm/mach-msm7200/include/mach/debug-macro.S
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <mach/hardware.h>
+#include <mach/msm_iomap.h>
+
+	.macro	addruart,rx
+	@ see if the MMU is enabled and select appropriate base address
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1
+	ldreq	\rx, =MSM_UART1_PHYS
+	ldrne	\rx, =MSM_UART1_BASE
+	.endm
+
+	.macro	senduart,rd,rx
+	str	\rd, [\rx, #0x0C]
+	.endm
+
+	.macro	waituart,rd,rx
+	@ wait for TX_READY
+1:	ldr	\rd, [\rx, #0x08]
+	tst	\rd, #0x04
+	beq	1b
+	.endm
+
+	.macro	busyuart,rd,rx
+	.endm
diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h
new file mode 100644
index 0000000..ad1c87f
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/dma.h
@@ -0,0 +1,151 @@
+/* arch/arm/mach-msm/include/mach/dma.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_DMA_H
+
+#include <linux/list.h>
+#include <mach/msm_iomap.h>
+
+struct msm_dmov_cmd {
+	struct list_head list;
+	unsigned int cmdptr;
+	void (*complete_func)(struct msm_dmov_cmd *cmd, unsigned int result);
+/*	void (*user_result_func)(struct msm_dmov_cmd *cmd); */
+};
+
+void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
+void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd);
+int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr);
+/* int msm_dmov_exec_cmd_etc(unsigned id, unsigned int cmdptr, int timeout, int interruptible); */
+
+
+
+#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
+#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2))
+#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2))
+#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2))
+
+/* only security domain 3 is available to the ARM11
+ * SD0 -> mARM trusted, SD1 -> mARM nontrusted, SD2 -> aDSP, SD3 -> aARM
+ */
+
+#define DMOV_CMD_PTR(ch)      DMOV_SD3(0x000, ch)
+#define DMOV_CMD_LIST         (0 << 29) /* does not work */
+#define DMOV_CMD_PTR_LIST     (1 << 29) /* works */
+#define DMOV_CMD_INPUT_CFG    (2 << 29) /* untested */
+#define DMOV_CMD_OUTPUT_CFG   (3 << 29) /* untested */
+#define DMOV_CMD_ADDR(addr)   ((addr) >> 3)
+
+#define DMOV_RSLT(ch)         DMOV_SD3(0x040, ch)
+#define DMOV_RSLT_VALID       (1 << 31) /* 0 == host has empties result fifo */
+#define DMOV_RSLT_ERROR       (1 << 3)
+#define DMOV_RSLT_FLUSH       (1 << 2)
+#define DMOV_RSLT_DONE        (1 << 1)  /* top pointer done */
+#define DMOV_RSLT_USER        (1 << 0)  /* command with FR force result */
+
+#define DMOV_FLUSH0(ch)       DMOV_SD3(0x080, ch)
+#define DMOV_FLUSH1(ch)       DMOV_SD3(0x0C0, ch)
+#define DMOV_FLUSH2(ch)       DMOV_SD3(0x100, ch)
+#define DMOV_FLUSH3(ch)       DMOV_SD3(0x140, ch)
+#define DMOV_FLUSH4(ch)       DMOV_SD3(0x180, ch)
+#define DMOV_FLUSH5(ch)       DMOV_SD3(0x1C0, ch)
+
+#define DMOV_STATUS(ch)       DMOV_SD3(0x200, ch)
+#define DMOV_STATUS_RSLT_COUNT(n)    (((n) >> 29))
+#define DMOV_STATUS_CMD_COUNT(n)     (((n) >> 27) & 3)
+#define DMOV_STATUS_RSLT_VALID       (1 << 1)
+#define DMOV_STATUS_CMD_PTR_RDY      (1 << 0)
+
+#define DMOV_ISR              DMOV_SD3(0x380, 0)
+
+#define DMOV_CONFIG(ch)       DMOV_SD3(0x300, ch)
+#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2)
+#define DMOV_CONFIG_FORCE_FLUSH_RSLT   (1 << 1)
+#define DMOV_CONFIG_IRQ_EN             (1 << 0)
+
+/* channel assignments */
+
+#define DMOV_NAND_CHAN        7
+#define DMOV_NAND_CRCI_CMD    5
+#define DMOV_NAND_CRCI_DATA   4
+
+#define DMOV_SDC1_CHAN        8
+#define DMOV_SDC1_CRCI        6
+
+#define DMOV_SDC2_CHAN        8
+#define DMOV_SDC2_CRCI        7
+
+#define DMOV_TSIF_CHAN        10
+#define DMOV_TSIF_CRCI        10
+
+#define DMOV_USB_CHAN         11
+
+/* no client rate control ifc (eg, ram) */
+#define DMOV_NONE_CRCI        0
+
+
+/* If the CMD_PTR register has CMD_PTR_LIST selected, the data mover
+ * is going to walk a list of 32bit pointers as described below.  Each
+ * pointer points to a *array* of dmov_s, etc structs.  The last pointer
+ * in the list is marked with CMD_PTR_LP.  The last struct in each array
+ * is marked with CMD_LC (see below).
+ */
+#define CMD_PTR_ADDR(addr)  ((addr) >> 3)
+#define CMD_PTR_LP          (1 << 31) /* last pointer */
+#define CMD_PTR_PT          (3 << 29) /* ? */
+
+/* Single Item Mode */
+typedef struct {
+	unsigned cmd;
+	unsigned src;
+	unsigned dst;
+	unsigned len;
+} dmov_s;
+
+/* Scatter/Gather Mode */
+typedef struct {
+	unsigned cmd;
+	unsigned src_dscr;
+	unsigned dst_dscr;
+	unsigned _reserved;
+} dmov_sg;
+
+/* bits for the cmd field of the above structures */
+
+#define CMD_LC      (1 << 31)  /* last command */
+#define CMD_FR      (1 << 22)  /* force result -- does not work? */
+#define CMD_OCU     (1 << 21)  /* other channel unblock */
+#define CMD_OCB     (1 << 20)  /* other channel block */
+#define CMD_TCB     (1 << 19)  /* ? */
+#define CMD_DAH     (1 << 18)  /* destination address hold -- does not work?*/
+#define CMD_SAH     (1 << 17)  /* source address hold -- does not work? */
+
+#define CMD_MODE_SINGLE     (0 << 0) /* dmov_s structure used */
+#define CMD_MODE_SG         (1 << 0) /* untested */
+#define CMD_MODE_IND_SG     (2 << 0) /* untested */
+#define CMD_MODE_BOX        (3 << 0) /* untested */
+
+#define CMD_DST_SWAP_BYTES  (1 << 14) /* exchange each byte n with byte n+1 */
+#define CMD_DST_SWAP_SHORTS (1 << 15) /* exchange each short n with short n+1 */
+#define CMD_DST_SWAP_WORDS  (1 << 16) /* exchange each word n with word n+1 */
+
+#define CMD_SRC_SWAP_BYTES  (1 << 11) /* exchange each byte n with byte n+1 */
+#define CMD_SRC_SWAP_SHORTS (1 << 12) /* exchange each short n with short n+1 */
+#define CMD_SRC_SWAP_WORDS  (1 << 13) /* exchange each word n with word n+1 */
+
+#define CMD_DST_CRCI(n)     (((n) & 15) << 7)
+#define CMD_SRC_CRCI(n)     (((n) & 15) << 3)
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S
new file mode 100644
index 0000000..d225948
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/entry-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-msm7200/include/mach/entry-macro.S
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <mach/msm_iomap.h>
+
+ 	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	@ enable imprecise aborts
+	cpsie	a
+	mov	\base, #MSM_VIC_BASE
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	@ 0xD0 has irq# or old irq# if the irq has been handled
+	@ 0xD4 has irq# or -1 if none pending *but* if you just
+	@ read 0xD4 you never get the first irq for some reason
+	ldr	\irqnr, [\base, #0xD0]
+	ldr	\irqnr, [\base, #0xD4]
+	cmp	\irqnr, #0xffffffff
+	.endm
diff --git a/arch/arm/mach-msm/include/mach/hardware.h b/arch/arm/mach-msm/include/mach/hardware.h
new file mode 100644
index 0000000..2d12609
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-msm/include/mach/hardware.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_HARDWARE_H
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/io.h b/arch/arm/mach-msm/include/mach/io.h
new file mode 100644
index 0000000..c6a2feb
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/io.h
@@ -0,0 +1,33 @@
+/* arch/arm/mach-msm/include/mach/io.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __arch_ioremap __msm_ioremap
+#define __arch_iounmap __iounmap
+
+void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype);
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+#define __io(a)         __io(a)
+#define __mem_pci(a)    (a)
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs.h b/arch/arm/mach-msm/include/mach/irqs.h
new file mode 100644
index 0000000..9dd4cf8
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/irqs.h
@@ -0,0 +1,90 @@
+/* arch/arm/mach-msm/include/mach/irqs.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IRQS_H
+#define __ASM_ARCH_MSM_IRQS_H
+
+/* MSM ARM11 Interrupt Numbers */
+/* See 80-VE113-1 A, pp219-221     */
+
+#define INT_A9_M2A_0         0
+#define INT_A9_M2A_1         1
+#define INT_A9_M2A_2         2
+#define INT_A9_M2A_3         3
+#define INT_A9_M2A_4         4
+#define INT_A9_M2A_5         5
+#define INT_A9_M2A_6         6
+#define INT_GP_TIMER_EXP     7
+#define INT_DEBUG_TIMER_EXP  8
+#define INT_UART1            9
+#define INT_UART2            10
+#define INT_UART3            11
+#define INT_UART1_RX         12
+#define INT_UART2_RX         13
+#define INT_UART3_RX         14
+#define INT_USB_OTG          15
+#define INT_MDDI_PRI         16
+#define INT_MDDI_EXT         17
+#define INT_MDDI_CLIENT      18
+#define INT_MDP              19
+#define INT_GRAPHICS         20
+#define INT_ADM_AARM         21
+#define INT_ADSP_A11         22
+#define INT_ADSP_A9_A11      23
+#define INT_SDC1_0           24
+#define INT_SDC1_1           25
+#define INT_SDC2_0           26
+#define INT_SDC2_1           27
+#define INT_KEYSENSE         28
+#define INT_TCHSCRN_SSBI     29
+#define INT_TCHSCRN1         30
+#define INT_TCHSCRN2         31
+
+#define INT_GPIO_GROUP1      (32 + 0)
+#define INT_GPIO_GROUP2      (32 + 1)
+#define INT_PWB_I2C          (32 + 2)
+#define INT_SOFTRESET        (32 + 3)
+#define INT_NAND_WR_ER_DONE  (32 + 4)
+#define INT_NAND_OP_DONE     (32 + 5)
+#define INT_PBUS_ARM11       (32 + 6)
+#define INT_AXI_MPU_SMI      (32 + 7)
+#define INT_AXI_MPU_EBI1     (32 + 8)
+#define INT_AD_HSSD          (32 + 9)
+#define INT_ARM11_PMU        (32 + 10)
+#define INT_ARM11_DMA        (32 + 11)
+#define INT_TSIF_IRQ         (32 + 12)
+#define INT_UART1DM_IRQ      (32 + 13)
+#define INT_UART1DM_RX       (32 + 14)
+#define INT_USB_HS           (32 + 15)
+#define INT_SDC3_0           (32 + 16)
+#define INT_SDC3_1           (32 + 17)
+#define INT_SDC4_0           (32 + 18)
+#define INT_SDC4_1           (32 + 19)
+#define INT_UART2DM_RX       (32 + 20)
+#define INT_UART2DM_IRQ      (32 + 21)
+
+/* 22-31 are reserved */
+
+#define MSM_IRQ_BIT(irq)     (1 << ((irq) & 31))
+
+#define NR_MSM_IRQS 64
+#define NR_GPIO_IRQS 122
+#define NR_BOARD_IRQS 64
+#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS)
+
+#define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n))
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h
new file mode 100644
index 0000000..63fd47f
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/memory.h
@@ -0,0 +1,27 @@
+/* arch/arm/mach-msm/include/mach/memory.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/* physical offset of RAM */
+#define PHYS_OFFSET		UL(0x10000000)
+
+/* bus address and physical addresses are identical */
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+#endif
+
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
new file mode 100644
index 0000000..e221f58
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -0,0 +1,104 @@
+/* arch/arm/mach-msm/include/mach/msm_iomap.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * The MSM peripherals are spread all over across 768MB of physical
+ * space, which makes just having a simple IO_ADDRESS macro to slide
+ * them into the right virtual location rough.  Instead, we will
+ * provide a master phys->virt mapping for peripherals here.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IOMAP_H
+#define __ASM_ARCH_MSM_IOMAP_H
+
+#include <asm/sizes.h>
+
+/* Physical base address and size of peripherals.
+ * Ordered by the virtual base addresses they will be mapped at.
+ *
+ * MSM_VIC_BASE must be an value that can be loaded via a "mov"
+ * instruction, otherwise entry-macro.S will not compile.
+ *
+ * If you add or remove entries here, you'll want to edit the
+ * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
+ * changes.
+ *
+ */
+
+#define MSM_VIC_BASE          0xE0000000
+#define MSM_VIC_PHYS          0xC0000000
+#define MSM_VIC_SIZE          SZ_4K
+
+#define MSM_CSR_BASE          0xE0001000
+#define MSM_CSR_PHYS          0xC0100000
+#define MSM_CSR_SIZE          SZ_4K
+
+#define MSM_GPT_PHYS          MSM_CSR_PHYS
+#define MSM_GPT_BASE          MSM_CSR_BASE
+#define MSM_GPT_SIZE          SZ_4K
+
+#define MSM_DMOV_BASE         0xE0002000
+#define MSM_DMOV_PHYS         0xA9700000
+#define MSM_DMOV_SIZE         SZ_4K
+
+#define MSM_UART1_BASE        0xE0003000
+#define MSM_UART1_PHYS        0xA9A00000
+#define MSM_UART1_SIZE        SZ_4K
+
+#define MSM_UART2_BASE        0xE0004000
+#define MSM_UART2_PHYS        0xA9B00000
+#define MSM_UART2_SIZE        SZ_4K
+
+#define MSM_UART3_BASE        0xE0005000
+#define MSM_UART3_PHYS        0xA9C00000
+#define MSM_UART3_SIZE        SZ_4K
+
+#define MSM_I2C_BASE          0xE0006000
+#define MSM_I2C_PHYS          0xA9900000
+#define MSM_I2C_SIZE          SZ_4K
+
+#define MSM_GPIO1_BASE        0xE0007000
+#define MSM_GPIO1_PHYS        0xA9200000
+#define MSM_GPIO1_SIZE        SZ_4K
+
+#define MSM_GPIO2_BASE        0xE0008000
+#define MSM_GPIO2_PHYS        0xA9300000
+#define MSM_GPIO2_SIZE        SZ_4K
+
+#define MSM_HSUSB_BASE        0xE0009000
+#define MSM_HSUSB_PHYS        0xA0800000
+#define MSM_HSUSB_SIZE        SZ_4K
+
+#define MSM_CLK_CTL_BASE      0xE000A000
+#define MSM_CLK_CTL_PHYS      0xA8600000
+#define MSM_CLK_CTL_SIZE      SZ_4K
+
+#define MSM_PMDH_BASE         0xE000B000
+#define MSM_PMDH_PHYS         0xAA600000
+#define MSM_PMDH_SIZE         SZ_4K
+
+#define MSM_EMDH_BASE         0xE000C000
+#define MSM_EMDH_PHYS         0xAA700000
+#define MSM_EMDH_SIZE         SZ_4K
+
+#define MSM_MDP_BASE          0xE0010000
+#define MSM_MDP_PHYS          0xAA200000
+#define MSM_MDP_SIZE          0x000F0000
+
+#define MSM_SHARED_RAM_BASE   0xE0100000
+#define MSM_SHARED_RAM_PHYS   0x01F00000
+#define MSM_SHARED_RAM_SIZE   SZ_1M
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h
new file mode 100644
index 0000000..f05ad2e
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/system.h
@@ -0,0 +1,23 @@
+/* arch/arm/mach-msm/include/mach/system.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <mach/hardware.h>
+
+void arch_idle(void);
+
+static inline void arch_reset(char mode)
+{
+	for (;;) ;  /* depends on IPC w/ other core */
+}
diff --git a/arch/arm/mach-msm/include/mach/timex.h b/arch/arm/mach-msm/include/mach/timex.h
new file mode 100644
index 0000000..a62e6b2
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/timex.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-msm/include/mach/timex.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_TIMEX_H
+#define __ASM_ARCH_MSM_TIMEX_H
+
+#define CLOCK_TICK_RATE		1000000
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h
new file mode 100644
index 0000000..026e895
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/uncompress.h
@@ -0,0 +1,36 @@
+/* arch/arm/mach-msm/include/mach/uncompress.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
+
+#include "hardware.h"
+
+static void putc(int c)
+{
+}
+
+static inline void flush(void)
+{
+}
+
+static inline void arch_decomp_setup(void)
+{
+}
+
+static inline void arch_decomp_wdog(void)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/vmalloc.h b/arch/arm/mach-msm/include/mach/vmalloc.h
new file mode 100644
index 0000000..05f81fd
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/vmalloc.h
@@ -0,0 +1,22 @@
+/* arch/arm/mach-msm/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_VMALLOC_H
+#define __ASM_ARCH_MSM_VMALLOC_H
+
+#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
+
+#endif
+
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index eca4283..5976200 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -19,13 +19,13 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/page.h>
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 #define MSM_DEVICE(name) { \
 		.virtual = MSM_##name##_BASE, \
diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c
index 0535b39..66901ba 100644
--- a/arch/arm/mach-msm/irq.c
+++ b/arch/arm/mach-msm/irq.c
@@ -21,11 +21,11 @@
 #include <linux/timer.h>
 
 #include <linux/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/io.h>
 
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
 
 #define VIC_REG(off) (MSM_VIC_BASE + (off))
 
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index bd4732d..9f02d7d 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -22,7 +22,7 @@
 #include <linux/delay.h>
 
 #include <asm/mach/time.h>
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
 
 #include <asm/io.h>
 
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index d27b83b..e633f9c 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -17,7 +17,7 @@
 #include <linux/ata_platform.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/arch/mv78xx0.h>
+#include <mach/mv78xx0.h>
 #include <asm/plat-orion/cache-feroceon-l2.h>
 #include <asm/plat-orion/ehci-orion.h>
 #include <asm/plat-orion/orion_nand.h>
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index 0c93d19..a2d0c97 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -13,7 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <asm/arch/mv78xx0.h>
+#include <mach/mv78xx0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include "common.h"
diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
new file mode 100644
index 0000000..a06442f
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/mv78xx0.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =MV78XX0_REGS_PHYS_BASE
+	ldrne	\rx, =MV78XX0_REGS_VIRT_BASE
+	orr	\rx, \rx, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-kirkwood/dma.h b/arch/arm/mach-mv78xx0/include/mach/dma.h
similarity index 100%
copy from include/asm-arm/arch-kirkwood/dma.h
copy to arch/arm/mach-mv78xx0/include/mach/dma.h
diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
new file mode 100644
index 0000000..ed4a46b
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell MV78xx0 platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/mv78xx0.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =IRQ_VIRT_BASE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	@ check low interrupts
+	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
+	mov	\irqnr, #31
+	ands	\irqstat, \irqstat, \tmp
+
+	@ if no low interrupts set, check high interrupts
+	ldreq	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+	ldreq	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
+	moveq	\irqnr, #63
+	andeqs	\irqstat, \irqstat, \tmp
+
+	@ find first active interrupt source
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-mv78xx0/include/mach/hardware.h b/arch/arm/mach-mv78xx0/include/mach/hardware.h
new file mode 100644
index 0000000..5d88755
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/hardware.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "mv78xx0.h"
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO			0x00001000
+#define PCIBIOS_MIN_MEM			0x01000000
+#define PCIMEM_BASE			MV78XX0_PCIE_MEM_PHYS_BASE /* mem base for VGA */
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/io.h b/arch/arm/mach-mv78xx0/include/mach/io.h
new file mode 100644
index 0000000..450e0e1
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/io.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "mv78xx0.h"
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0))
+					+ MV78XX0_PCIE_IO_VIRT_BASE(0));
+}
+
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/irqs.h b/arch/arm/mach-mv78xx0/include/mach/irqs.h
new file mode 100644
index 0000000..995d7fb
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/irqs.h
@@ -0,0 +1,91 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "mv78xx0.h"	/* need GPIO_MAX */
+
+/*
+ * MV78xx0 Low Interrupt Controller
+ */
+#define IRQ_MV78XX0_ERR		0
+#define IRQ_MV78XX0_SPI		1
+#define IRQ_MV78XX0_I2C_0	2
+#define IRQ_MV78XX0_I2C_1	3
+#define IRQ_MV78XX0_IDMA_0	4
+#define IRQ_MV78XX0_IDMA_1	5
+#define IRQ_MV78XX0_IDMA_2	6
+#define IRQ_MV78XX0_IDMA_3	7
+#define IRQ_MV78XX0_TIMER_0	8
+#define IRQ_MV78XX0_TIMER_1	9
+#define IRQ_MV78XX0_TIMER_2	10
+#define IRQ_MV78XX0_TIMER_3	11
+#define IRQ_MV78XX0_UART_0	12
+#define IRQ_MV78XX0_UART_1	13
+#define IRQ_MV78XX0_UART_2	14
+#define IRQ_MV78XX0_UART_3	15
+#define IRQ_MV78XX0_USB_0	16
+#define IRQ_MV78XX0_USB_1	17
+#define IRQ_MV78XX0_USB_2	18
+#define IRQ_MV78XX0_CRYPTO	19
+#define IRQ_MV78XX0_SDIO_0	20
+#define IRQ_MV78XX0_SDIO_1	21
+#define IRQ_MV78XX0_XOR_0	22
+#define IRQ_MV78XX0_XOR_1	23
+#define IRQ_MV78XX0_I2S_0	24
+#define IRQ_MV78XX0_I2S_1	25
+#define IRQ_MV78XX0_SATA	26
+#define IRQ_MV78XX0_TDMI	27
+
+/*
+ * MV78xx0 High Interrupt Controller
+ */
+#define IRQ_MV78XX0_PCIE_00	32
+#define IRQ_MV78XX0_PCIE_01	33
+#define IRQ_MV78XX0_PCIE_02	34
+#define IRQ_MV78XX0_PCIE_03	35
+#define IRQ_MV78XX0_PCIE_10	36
+#define IRQ_MV78XX0_PCIE_11	37
+#define IRQ_MV78XX0_PCIE_12	38
+#define IRQ_MV78XX0_PCIE_13	39
+#define IRQ_MV78XX0_GE00_SUM	40
+#define IRQ_MV78XX0_GE00_RX	41
+#define IRQ_MV78XX0_GE00_TX	42
+#define IRQ_MV78XX0_GE00_MISC	43
+#define IRQ_MV78XX0_GE01_SUM	44
+#define IRQ_MV78XX0_GE01_RX	45
+#define IRQ_MV78XX0_GE01_TX	46
+#define IRQ_MV78XX0_GE01_MISC	47
+#define IRQ_MV78XX0_GE10_SUM	48
+#define IRQ_MV78XX0_GE10_RX	49
+#define IRQ_MV78XX0_GE10_TX	50
+#define IRQ_MV78XX0_GE10_MISC	51
+#define IRQ_MV78XX0_GE11_SUM	52
+#define IRQ_MV78XX0_GE11_RX	53
+#define IRQ_MV78XX0_GE11_TX	54
+#define IRQ_MV78XX0_GE11_MISC	55
+#define IRQ_MV78XX0_GPIO_0_7	56
+#define IRQ_MV78XX0_GPIO_8_15	57
+#define IRQ_MV78XX0_GPIO_16_23	58
+#define IRQ_MV78XX0_GPIO_24_31	59
+#define IRQ_MV78XX0_DB_IN	60
+#define IRQ_MV78XX0_DB_OUT	61
+
+/*
+ * MV78XX0 General Purpose Pins
+ */
+#define IRQ_MV78XX0_GPIO_START	64
+#define NR_GPIO_IRQS		GPIO_MAX
+
+#define NR_IRQS			(IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/memory.h b/arch/arm/mach-mv78xx0/include/mach/memory.h
new file mode 100644
index 0000000..9e47a140
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x00000000)
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
new file mode 100644
index 0000000..ad66417
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -0,0 +1,126 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+ *
+ * Generic definitions for Marvell MV78xx0 SoC flavors:
+ *  MV781x0 and MV782x0.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_MV78XX0_H
+#define __ASM_ARCH_MV78XX0_H
+
+/*
+ * Marvell MV78xx0 address maps.
+ *
+ * phys
+ * c0000000	PCIe Memory space
+ * f0800000	PCIe #0 I/O space
+ * f0900000	PCIe #1 I/O space
+ * f0a00000	PCIe #2 I/O space
+ * f0b00000	PCIe #3 I/O space
+ * f0c00000	PCIe #4 I/O space
+ * f0d00000	PCIe #5 I/O space
+ * f0e00000	PCIe #6 I/O space
+ * f0f00000	PCIe #7 I/O space
+ * f1000000	on-chip peripheral registers
+ *
+ * virt		phys		size
+ * fe400000	f102x000	16K	core-specific peripheral registers
+ * fe700000	f0800000	1M	PCIe #0 I/O space
+ * fe800000	f0900000	1M	PCIe #1 I/O space
+ * fe900000	f0a00000	1M	PCIe #2 I/O space
+ * fea00000	f0b00000	1M	PCIe #3 I/O space
+ * feb00000	f0c00000	1M	PCIe #4 I/O space
+ * fec00000	f0d00000	1M	PCIe #5 I/O space
+ * fed00000	f0e00000	1M	PCIe #6 I/O space
+ * fee00000	f0f00000	1M	PCIe #7 I/O space
+ * fef00000	f1000000	1M	on-chip peripheral registers
+ */
+#define MV78XX0_CORE0_REGS_PHYS_BASE	0xf1020000
+#define MV78XX0_CORE1_REGS_PHYS_BASE	0xf1024000
+#define MV78XX0_CORE_REGS_VIRT_BASE	0xfe400000
+#define MV78XX0_CORE_REGS_SIZE		SZ_16K
+
+#define MV78XX0_PCIE_IO_PHYS_BASE(i)	(0xf0800000 + ((i) << 20))
+#define MV78XX0_PCIE_IO_VIRT_BASE(i)	(0xfe700000 + ((i) << 20))
+#define MV78XX0_PCIE_IO_SIZE		SZ_1M
+
+#define MV78XX0_REGS_PHYS_BASE		0xf1000000
+#define MV78XX0_REGS_VIRT_BASE		0xfef00000
+#define MV78XX0_REGS_SIZE		SZ_1M
+
+#define MV78XX0_PCIE_MEM_PHYS_BASE	0xc0000000
+#define MV78XX0_PCIE_MEM_SIZE		0x30000000
+
+/*
+ * Core-specific peripheral registers.
+ */
+#define BRIDGE_VIRT_BASE	(MV78XX0_CORE_REGS_VIRT_BASE)
+#define  CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define   L2_WRITETHROUGH	0x00020000
+#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define   SOFT_RESET_OUT_EN	0x00000004
+#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define   SOFT_RESET		0x00000001
+#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define   BRIDGE_INT_TIMER0	0x0002
+#define   BRIDGE_INT_TIMER1	0x0004
+#define   BRIDGE_INT_TIMER1_CLR	(~0x0004)
+#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define   IRQ_CAUSE_LOW_OFF	0x0004
+#define   IRQ_CAUSE_HIGH_OFF	0x0008
+#define   IRQ_MASK_LOW_OFF	0x0010
+#define   IRQ_MASK_HIGH_OFF	0x0014
+#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
+
+/*
+ * Register Map
+ */
+#define DDR_VIRT_BASE		(MV78XX0_REGS_VIRT_BASE | 0x00000)
+#define  DDR_WINDOW_CPU0_BASE	(DDR_VIRT_BASE | 0x1500)
+#define  DDR_WINDOW_CPU1_BASE	(DDR_VIRT_BASE | 0x1700)
+
+#define DEV_BUS_PHYS_BASE	(MV78XX0_REGS_PHYS_BASE | 0x10000)
+#define DEV_BUS_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x10000)
+#define  SAMPLE_AT_RESET_LOW	(DEV_BUS_VIRT_BASE | 0x0030)
+#define  SAMPLE_AT_RESET_HIGH	(DEV_BUS_VIRT_BASE | 0x0034)
+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
+#define  UART2_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2200)
+#define  UART2_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2200)
+#define  UART3_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2300)
+#define  UART3_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2300)
+
+#define GE10_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x30000)
+#define GE11_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x34000)
+
+#define PCIE00_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x40000)
+#define PCIE01_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x44000)
+#define PCIE02_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x48000)
+#define PCIE03_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x4c000)
+
+#define USB0_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x50000)
+#define USB1_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x51000)
+#define USB2_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x52000)
+
+#define GE00_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x70000)
+#define GE01_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x74000)
+
+#define PCIE10_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x80000)
+#define PCIE11_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x84000)
+#define PCIE12_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x88000)
+#define PCIE13_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x8c000)
+
+#define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0xa0000)
+
+
+#define GPIO_MAX		32
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h
new file mode 100644
index 0000000..7d51794
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/system.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/mv78xx0.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/timex.h b/arch/arm/mach-mv78xx0/include/mach/timex.h
new file mode 100644
index 0000000..0e8c443
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/arch/arm/mach-mv78xx0/include/mach/uncompress.h b/arch/arm/mach-mv78xx0/include/mach/uncompress.h
new file mode 100644
index 0000000..3652642
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/mv78xx0.h>
+
+#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+	unsigned char *base = SERIAL_BASE;
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		if (base[UART_LSR << 2] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+	unsigned char *base = SERIAL_BASE;
+	unsigned char mask;
+	int i;
+
+	mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+	for (i = 0; i < 0x1000; i++) {
+		if ((base[UART_LSR << 2] & mask) == mask)
+			break;
+		barrier();
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-mv78xx0/include/mach/vmalloc.h b/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
new file mode 100644
index 0000000..1c49543
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe000000
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 60f4ee4..3198abf 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/pci.h>
-#include <asm/arch/mv78xx0.h>
+#include <mach/mv78xx0.h>
 #include <asm/plat-orion/irq.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 4af6f4f..c69896d 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -22,8 +22,8 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/clock.h>
-#include <asm/arch/common.h>
+#include <mach/clock.h>
+#include <mach/common.h>
 #include <asm/div64.h>
 
 #include "crm_regs.h"
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c
index 33f81f2..239308f 100644
--- a/arch/arm/mach-mx2/cpu_imx27.c
+++ b/arch/arm/mach-mx2/cpu_imx27.c
@@ -24,7 +24,7 @@
 #include <linux/io.h>
 #include <linux/module.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include "crm_regs.h"
 
diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h
index a40a9b9..94644cd 100644
--- a/arch/arm/mach-mx2/crm_regs.h
+++ b/arch/arm/mach-mx2/crm_regs.h
@@ -20,7 +20,7 @@
 #ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__
 #define __ARCH_ARM_MACH_MX2_CRM_REGS_H__
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 /* Register offsets */
 #define CCM_CSCR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index b5d2b63e..bd0559d 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -32,7 +32,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Resource definition for the MXC IrDA
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index 4de97e1..dea6521 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -20,7 +20,7 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 64c7bf6..4ce56ef 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -23,16 +23,16 @@
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
-#include <asm/arch/common.h>
-#include <asm/arch/hardware.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/imx-uart.h>
-#include <asm/arch/iomux-mx1-mx2.h>
-#include <asm/arch/board-mx27ads.h>
+#include <mach/gpio.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx1-mx2.h>
+#include <mach/board-mx27ads.h>
 
 /* ADS's NOR flash */
 static struct physmap_flash_data mx27ads_flash_data = {
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index ebe9726..1028f45 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -21,12 +21,12 @@
 #include <linux/mtd/physmap.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
-#include <asm/arch/common.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/iomux-mx1-mx2.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx1-mx2.h>
 #include <asm/mach/time.h>
-#include <asm/arch/imx-uart.h>
-#include <asm/arch/board-pcm038.h>
+#include <mach/imx-uart.h>
+#include <mach/board-pcm038.h>
 
 /*
  * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 165d54a..a560cd6 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -17,7 +17,7 @@
  */
 
 #include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/arch.h>
 
 /*
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
index 58dda23..e31fd44 100644
--- a/arch/arm/mach-mx2/serial.c
+++ b/arch/arm/mach-mx2/serial.c
@@ -20,8 +20,8 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/serial.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
 
 static struct resource uart0[] = {
 	{
diff --git a/arch/arm/mach-mx2/system.c b/arch/arm/mach-mx2/system.c
index 9930464..7b82697 100644
--- a/arch/arm/mach-mx2/system.c
+++ b/arch/arm/mach-mx2/system.c
@@ -23,7 +23,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/proc-fns.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 2f36359..9f14a87 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -23,7 +23,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 #include <asm/div64.h>
 
 #include "crm_regs.h"
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index cdd0ff9..e08c6a8 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -21,8 +21,8 @@
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
 
 static struct resource uart0[] = {
 	{
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
index e189a5f..3dda1fe 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux.c
@@ -21,9 +21,9 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/iomux-mx3.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/iomux-mx3.h>
 
 /*
  * IOMUX register (base) addresses
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 881b356..30d842b 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -22,10 +22,10 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
-#include <asm/arch/common.h>
+#include <mach/common.h>
 
 /*!
  * @file mm.c
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 63df8b0..60fb4e0 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -23,14 +23,14 @@
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/memory.h>
 #include <asm/mach/map.h>
-#include <asm/arch/common.h>
-#include <asm/arch/board-mx31ads.h>
+#include <mach/common.h>
+#include <mach/board-mx31ads.h>
 
 /*!
  * @file mx31ads.c
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index 03384a7..d363a6e 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -23,15 +23,15 @@
 #include <linux/kernel.h>
 #include <linux/memory.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/arch/common.h>
+#include <mach/common.h>
 #include <asm/page.h>
 #include <asm/setup.h>
-#include <asm/arch/board-mx31lite.h>
+#include <mach/board-mx31lite.h>
 
 /*
  * This file contains the board-specific initialization routines.
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 1bb4ead..0a152ed1 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -23,15 +23,15 @@
 #include <linux/mtd/physmap.h>
 #include <linux/memory.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/arch/common.h>
-#include <asm/arch/imx-uart.h>
-#include <asm/arch/iomux-mx3.h>
-#include <asm/arch/board-pcm037.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-pcm037.h>
 
 static struct physmap_flash_data pcm037_flash_data = {
 	.width  = 2,
diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c
index e169b68..24c7965 100644
--- a/arch/arm/mach-netx/fb.c
+++ b/arch/arm/mach-netx/fb.c
@@ -23,8 +23,8 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/hardware.h>
+#include <mach/netx-regs.h>
+#include <mach/hardware.h>
 
 struct clk {};
 
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index 798ac6e..1b40483 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -22,11 +22,11 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/map.h>
 #include <asm/hardware/vic.h>
 #include <asm/io.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/netx-regs.h>
 #include <asm/mach/irq.h>
 
 static struct map_desc netx_io_desc[] __initdata = {
diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S
new file mode 100644
index 0000000..11b9d5b
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-netx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include "hardware.h"
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x00100000		@ physical
+		movne	\rx, #io_p2v(0x00100000)	@ virtual
+		orr	\rx, \rx, #0x00000a00
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x18]
+		tst	\rd, #(1 << 3)
+		bne	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]
+		tst	\rd, #(1 << 3)
+		bne	1001b
+		.endm
diff --git a/arch/arm/mach-netx/include/mach/dma.h b/arch/arm/mach-netx/include/mach/dma.h
new file mode 100644
index 0000000..690b3eb
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/dma.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-netx/include/mach/dma.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define MAX_DMA_CHANNELS 0
+#define MAX_DMA_ADDRESS ~0
diff --git a/arch/arm/mach-netx/include/mach/entry-macro.S b/arch/arm/mach-netx/include/mach/entry-macro.S
new file mode 100644
index 0000000..a1952a0
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/entry-macro.S
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-netx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Hilscher netX based platforms
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <mach/hardware.h>
+
+		.macro  disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	\base, #io_p2v(0x00100000)
+		add	\base, \base, #0x000ff000
+
+		ldr	\irqstat, [\base, #0]
+		clz	\irqnr, \irqstat
+		rsb     \irqnr, \irqnr, #31
+		cmp	\irqstat, #0
+		.endm
+
diff --git a/arch/arm/mach-netx/include/mach/eth.h b/arch/arm/mach-netx/include/mach/eth.h
new file mode 100644
index 0000000..88af1ac
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/eth.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-netx/include/mach/eth.h
+ *
+ * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef ASMARM_ARCH_ETH_H
+#define ASMARM_ARCH_ETH_H
+
+struct netxeth_platform_data {
+	unsigned int xcno;	/* number of xmac/xpec engine this eth uses */
+};
+
+#endif
diff --git a/arch/arm/mach-netx/include/mach/hardware.h b/arch/arm/mach-netx/include/mach/hardware.h
new file mode 100644
index 0000000..517a2bd
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/hardware.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-netx/include/mach/hardware.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#define NETX_IO_PHYS	0x00100000
+#define NETX_IO_VIRT	0xe0000000
+#define NETX_IO_SIZE	0x00100000
+
+#define SRAM_INTERNAL_PHYS_0 0x00000
+#define SRAM_INTERNAL_PHYS_1 0x08000
+#define SRAM_INTERNAL_PHYS_2 0x10000
+#define SRAM_INTERNAL_PHYS_3 0x18000
+#define SRAM_INTERNAL_PHYS(no) ((no) * 0x8000)
+
+#define XPEC_MEM_SIZE 0x4000
+#define XMAC_MEM_SIZE 0x1000
+#define SRAM_MEM_SIZE 0x8000
+
+#define io_p2v(x) ((x) - NETX_IO_PHYS + NETX_IO_VIRT)
+#define io_v2p(x) ((x) - NETX_IO_VIRT + NETX_IO_PHYS)
+
+#endif
diff --git a/arch/arm/mach-netx/include/mach/io.h b/arch/arm/mach-netx/include/mach/io.h
new file mode 100644
index 0000000..468b92a
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/io.h
@@ -0,0 +1,28 @@
+/*
+ *  arch/arm/mach-netx/include/mach/io.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)         ((void __iomem *)(a))
+#define __mem_pci(a)            (a)
+
+#endif
diff --git a/arch/arm/mach-netx/include/mach/irqs.h b/arch/arm/mach-netx/include/mach/irqs.h
new file mode 100644
index 0000000..6ce914d
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/irqs.h
@@ -0,0 +1,70 @@
+/*
+ * arch/arm/mach-netx/include/mach/irqs.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define NETX_IRQ_VIC_START   0
+#define NETX_IRQ_SOFTINT     0
+#define NETX_IRQ_TIMER0      1
+#define NETX_IRQ_TIMER1      2
+#define NETX_IRQ_TIMER2      3
+#define NETX_IRQ_SYSTIME_NS  4
+#define NETX_IRQ_SYSTIME_S   5
+#define NETX_IRQ_GPIO_15     6
+#define NETX_IRQ_WATCHDOG    7
+#define NETX_IRQ_UART0       8
+#define NETX_IRQ_UART1       9
+#define NETX_IRQ_UART2      10
+#define NETX_IRQ_USB        11
+#define NETX_IRQ_SPI        12
+#define NETX_IRQ_I2C        13
+#define NETX_IRQ_LCD        14
+#define NETX_IRQ_HIF        15
+#define NETX_IRQ_GPIO_0_14  16
+#define NETX_IRQ_XPEC0      17
+#define NETX_IRQ_XPEC1      18
+#define NETX_IRQ_XPEC2      19
+#define NETX_IRQ_XPEC3      20
+#define NETX_IRQ_XPEC(no)   (17 + (no))
+#define NETX_IRQ_MSYNC0     21
+#define NETX_IRQ_MSYNC1     22
+#define NETX_IRQ_MSYNC2     23
+#define NETX_IRQ_MSYNC3     24
+#define NETX_IRQ_IRQ_PHY    25
+#define NETX_IRQ_ISO_AREA   26
+/* int 27 is reserved */
+/* int 28 is reserved */
+#define NETX_IRQ_TIMER3     29
+#define NETX_IRQ_TIMER4     30
+/* int 31 is reserved */
+
+#define NETX_IRQS 32
+
+/* for multiplexed irqs on gpio 0..14 */
+#define NETX_IRQ_GPIO(x) (NETX_IRQS + (x))
+#define NETX_IRQ_GPIO_LAST NETX_IRQ_GPIO(14)
+
+/* Host interface interrupts */
+#define NETX_IRQ_HIF_CHAINED(x)    (NETX_IRQ_GPIO_LAST + 1 + (x))
+#define NETX_IRQ_HIF_PIO35         NETX_IRQ_HIF_CHAINED(0)
+#define NETX_IRQ_HIF_PIO36         NETX_IRQ_HIF_CHAINED(1)
+#define NETX_IRQ_HIF_PIO40         NETX_IRQ_HIF_CHAINED(2)
+#define NETX_IRQ_HIF_PIO47         NETX_IRQ_HIF_CHAINED(3)
+#define NETX_IRQ_HIF_PIO72         NETX_IRQ_HIF_CHAINED(4)
+#define NETX_IRQ_HIF_LAST          NETX_IRQ_HIF_CHAINED(4)
+
+#define NR_IRQS (NETX_IRQ_HIF_LAST + 1)
diff --git a/arch/arm/mach-netx/include/mach/memory.h b/arch/arm/mach-netx/include/mach/memory.h
new file mode 100644
index 0000000..53745a1
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/memory.h
@@ -0,0 +1,36 @@
+/*
+ *  arch/arm/mach-netx/include/mach/memory.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x80000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)         __virt_to_phys(x)
+#define __bus_to_virt(x)         __phys_to_virt(x)
+
+#endif
+
diff --git a/arch/arm/mach-netx/include/mach/netx-regs.h b/arch/arm/mach-netx/include/mach/netx-regs.h
new file mode 100644
index 0000000..5104a00
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/netx-regs.h
@@ -0,0 +1,410 @@
+/*
+ * arch/arm/mach-netx/include/mach/netx-regs.h
+ *
+ * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_NETX_REGS_H
+#define __ASM_ARCH_NETX_REGS_H
+
+/* offsets relative to the beginning of the io space */
+#define NETX_OFS_SYSTEM  0x00000
+#define NETX_OFS_MEMCR   0x00100
+#define NETX_OFS_DPMAS   0x03000
+#define NETX_OFS_GPIO    0x00800
+#define NETX_OFS_PIO     0x00900
+#define NETX_OFS_UART0   0x00a00
+#define NETX_OFS_UART1   0x00a40
+#define NETX_OFS_UART2   0x00a80
+#define NETX_OF_MIIMU    0x00b00
+#define NETX_OFS_SPI     0x00c00
+#define NETX_OFS_I2C     0x00d00
+#define NETX_OFS_SYSTIME 0x01100
+#define NETX_OFS_RTC     0x01200
+#define NETX_OFS_EXTBUS  0x03600
+#define NETX_OFS_LCD     0x04000
+#define NETX_OFS_USB     0x20000
+#define NETX_OFS_XMAC0   0x60000
+#define NETX_OFS_XMAC1   0x61000
+#define NETX_OFS_XMAC2   0x62000
+#define NETX_OFS_XMAC3   0x63000
+#define NETX_OFS_XMAC(no) (0x60000 + (no) * 0x1000)
+#define NETX_OFS_PFIFO   0x64000
+#define NETX_OFS_XPEC0   0x70000
+#define NETX_OFS_XPEC1   0x74000
+#define NETX_OFS_XPEC2   0x78000
+#define NETX_OFS_XPEC3   0x7c000
+#define NETX_OFS_XPEC(no) (0x70000 + (no) * 0x4000)
+#define NETX_OFS_VIC     0xff000
+
+/* physical addresses */
+#define NETX_PA_SYSTEM   (NETX_IO_PHYS + NETX_OFS_SYSTEM)
+#define NETX_PA_MEMCR    (NETX_IO_PHYS + NETX_OFS_MEMCR)
+#define NETX_PA_DPMAS    (NETX_IO_PHYS + NETX_OFS_DPMAS)
+#define NETX_PA_GPIO     (NETX_IO_PHYS + NETX_OFS_GPIO)
+#define NETX_PA_PIO      (NETX_IO_PHYS + NETX_OFS_PIO)
+#define NETX_PA_UART0    (NETX_IO_PHYS + NETX_OFS_UART0)
+#define NETX_PA_UART1    (NETX_IO_PHYS + NETX_OFS_UART1)
+#define NETX_PA_UART2    (NETX_IO_PHYS + NETX_OFS_UART2)
+#define NETX_PA_MIIMU    (NETX_IO_PHYS + NETX_OF_MIIMU)
+#define NETX_PA_SPI      (NETX_IO_PHYS + NETX_OFS_SPI)
+#define NETX_PA_I2C      (NETX_IO_PHYS + NETX_OFS_I2C)
+#define NETX_PA_SYSTIME  (NETX_IO_PHYS + NETX_OFS_SYSTIME)
+#define NETX_PA_RTC      (NETX_IO_PHYS + NETX_OFS_RTC)
+#define NETX_PA_EXTBUS   (NETX_IO_PHYS + NETX_OFS_EXTBUS)
+#define NETX_PA_LCD      (NETX_IO_PHYS + NETX_OFS_LCD)
+#define NETX_PA_USB      (NETX_IO_PHYS + NETX_OFS_USB)
+#define NETX_PA_XMAC0    (NETX_IO_PHYS + NETX_OFS_XMAC0)
+#define NETX_PA_XMAC1    (NETX_IO_PHYS + NETX_OFS_XMAC1)
+#define NETX_PA_XMAC2    (NETX_IO_PHYS + NETX_OFS_XMAC2)
+#define NETX_PA_XMAC3    (NETX_IO_PHYS + NETX_OFS_XMAC3)
+#define NETX_PA_XMAC(no) (NETX_IO_PHYS + NETX_OFS_XMAC(no))
+#define NETX_PA_PFIFO    (NETX_IO_PHYS + NETX_OFS_PFIFO)
+#define NETX_PA_XPEC0    (NETX_IO_PHYS + NETX_OFS_XPEC0)
+#define NETX_PA_XPEC1    (NETX_IO_PHYS + NETX_OFS_XPEC1)
+#define NETX_PA_XPEC2    (NETX_IO_PHYS + NETX_OFS_XPEC2)
+#define NETX_PA_XPEC3    (NETX_IO_PHYS + NETX_OFS_XPEC3)
+#define NETX_PA_XPEC(no) (NETX_IO_PHYS + NETX_OFS_XPEC(no))
+#define NETX_PA_VIC      (NETX_IO_PHYS + NETX_OFS_VIC)
+
+/* virual addresses */
+#define NETX_VA_SYSTEM   (NETX_IO_VIRT + NETX_OFS_SYSTEM)
+#define NETX_VA_MEMCR    (NETX_IO_VIRT + NETX_OFS_MEMCR)
+#define NETX_VA_DPMAS    (NETX_IO_VIRT + NETX_OFS_DPMAS)
+#define NETX_VA_GPIO     (NETX_IO_VIRT + NETX_OFS_GPIO)
+#define NETX_VA_PIO      (NETX_IO_VIRT + NETX_OFS_PIO)
+#define NETX_VA_UART0    (NETX_IO_VIRT + NETX_OFS_UART0)
+#define NETX_VA_UART1    (NETX_IO_VIRT + NETX_OFS_UART1)
+#define NETX_VA_UART2    (NETX_IO_VIRT + NETX_OFS_UART2)
+#define NETX_VA_MIIMU    (NETX_IO_VIRT + NETX_OF_MIIMU)
+#define NETX_VA_SPI      (NETX_IO_VIRT + NETX_OFS_SPI)
+#define NETX_VA_I2C      (NETX_IO_VIRT + NETX_OFS_I2C)
+#define NETX_VA_SYSTIME  (NETX_IO_VIRT + NETX_OFS_SYSTIME)
+#define NETX_VA_RTC      (NETX_IO_VIRT + NETX_OFS_RTC)
+#define NETX_VA_EXTBUS   (NETX_IO_VIRT + NETX_OFS_EXTBUS)
+#define NETX_VA_LCD      (NETX_IO_VIRT + NETX_OFS_LCD)
+#define NETX_VA_USB      (NETX_IO_VIRT + NETX_OFS_USB)
+#define NETX_VA_XMAC0    (NETX_IO_VIRT + NETX_OFS_XMAC0)
+#define NETX_VA_XMAC1    (NETX_IO_VIRT + NETX_OFS_XMAC1)
+#define NETX_VA_XMAC2    (NETX_IO_VIRT + NETX_OFS_XMAC2)
+#define NETX_VA_XMAC3    (NETX_IO_VIRT + NETX_OFS_XMAC3)
+#define NETX_VA_XMAC(no) (NETX_IO_VIRT + NETX_OFS_XMAC(no))
+#define NETX_VA_PFIFO    (NETX_IO_VIRT + NETX_OFS_PFIFO)
+#define NETX_VA_XPEC0    (NETX_IO_VIRT + NETX_OFS_XPEC0)
+#define NETX_VA_XPEC1    (NETX_IO_VIRT + NETX_OFS_XPEC1)
+#define NETX_VA_XPEC2    (NETX_IO_VIRT + NETX_OFS_XPEC2)
+#define NETX_VA_XPEC3    (NETX_IO_VIRT + NETX_OFS_XPEC3)
+#define NETX_VA_XPEC(no) (NETX_IO_VIRT + NETX_OFS_XPEC(no))
+#define NETX_VA_VIC      (NETX_IO_VIRT + NETX_OFS_VIC)
+
+/*********************************
+ * System functions              *
+ *********************************/
+
+/* Registers */
+#define NETX_SYSTEM_REG(ofs)            __io(NETX_VA_SYSTEM + (ofs))
+#define NETX_SYSTEM_BOO_SR          NETX_SYSTEM_REG(0x00)
+#define NETX_SYSTEM_IOC_CR          NETX_SYSTEM_REG(0x04)
+#define NETX_SYSTEM_IOC_MR          NETX_SYSTEM_REG(0x08)
+
+/* FIXME: Docs are not consistent */
+/* #define NETX_SYSTEM_RES_CR          NETX_SYSTEM_REG(0x08) */
+#define NETX_SYSTEM_RES_CR          NETX_SYSTEM_REG(0x0c)
+
+#define NETX_SYSTEM_PHY_CONTROL     NETX_SYSTEM_REG(0x10)
+#define NETX_SYSTEM_REV             NETX_SYSTEM_REG(0x34)
+#define NETX_SYSTEM_IOC_ACCESS_KEY  NETX_SYSTEM_REG(0x70)
+#define NETX_SYSTEM_WDG_TR          NETX_SYSTEM_REG(0x200)
+#define NETX_SYSTEM_WDG_CTR         NETX_SYSTEM_REG(0x204)
+#define NETX_SYSTEM_WDG_IRQ_TIMEOUT NETX_SYSTEM_REG(0x208)
+#define NETX_SYSTEM_WDG_RES_TIMEOUT NETX_SYSTEM_REG(0x20c)
+
+/* Bits */
+#define NETX_SYSTEM_RES_CR_RSTIN         (1<<0)
+#define NETX_SYSTEM_RES_CR_WDG_RES       (1<<1)
+#define NETX_SYSTEM_RES_CR_HOST_RES      (1<<2)
+#define NETX_SYSTEM_RES_CR_FIRMW_RES     (1<<3)
+#define NETX_SYSTEM_RES_CR_XPEC0_RES     (1<<4)
+#define NETX_SYSTEM_RES_CR_XPEC1_RES     (1<<5)
+#define NETX_SYSTEM_RES_CR_XPEC2_RES     (1<<6)
+#define NETX_SYSTEM_RES_CR_XPEC3_RES     (1<<7)
+#define NETX_SYSTEM_RES_CR_DIS_XPEC0_RES (1<<16)
+#define NETX_SYSTEM_RES_CR_DIS_XPEC1_RES (1<<17)
+#define NETX_SYSTEM_RES_CR_DIS_XPEC2_RES (1<<18)
+#define NETX_SYSTEM_RES_CR_DIS_XPEC3_RES (1<<19)
+#define NETX_SYSTEM_RES_CR_FIRMW_FLG0    (1<<20)
+#define NETX_SYSTEM_RES_CR_FIRMW_FLG1    (1<<21)
+#define NETX_SYSTEM_RES_CR_FIRMW_FLG2    (1<<22)
+#define NETX_SYSTEM_RES_CR_FIRMW_FLG3    (1<<23)
+#define NETX_SYSTEM_RES_CR_FIRMW_RES_EN  (1<<24)
+#define NETX_SYSTEM_RES_CR_RSTOUT        (1<<25)
+#define NETX_SYSTEM_RES_CR_EN_RSTOUT     (1<<26)
+
+#define PHY_CONTROL_RESET            (1<<31)
+#define PHY_CONTROL_SIM_BYP          (1<<30)
+#define PHY_CONTROL_CLK_XLATIN       (1<<29)
+#define PHY_CONTROL_PHY1_EN          (1<<21)
+#define PHY_CONTROL_PHY1_NP_MSG_CODE
+#define PHY_CONTROL_PHY1_AUTOMDIX    (1<<17)
+#define PHY_CONTROL_PHY1_FIXMODE     (1<<16)
+#define PHY_CONTROL_PHY1_MODE(mode)  (((mode) & 0x7) << 13)
+#define PHY_CONTROL_PHY0_EN          (1<<12)
+#define PHY_CONTROL_PHY0_NP_MSG_CODE
+#define PHY_CONTROL_PHY0_AUTOMDIX    (1<<8)
+#define PHY_CONTROL_PHY0_FIXMODE     (1<<7)
+#define PHY_CONTROL_PHY0_MODE(mode)  (((mode) & 0x7) << 4)
+#define PHY_CONTROL_PHY_ADDRESS(adr) ((adr) & 0xf)
+
+#define PHY_MODE_10BASE_T_HALF      0
+#define PHY_MODE_10BASE_T_FULL      1
+#define PHY_MODE_100BASE_TX_FX_FULL 2
+#define PHY_MODE_100BASE_TX_FX_HALF 3
+#define PHY_MODE_100BASE_TX_HALF    4
+#define PHY_MODE_REPEATER           5
+#define PHY_MODE_POWER_DOWN         6
+#define PHY_MODE_ALL                7
+
+/* Bits */
+#define VECT_CNTL_ENABLE               (1 << 5)
+
+/*******************************
+ * GPIO and timer module       *
+ *******************************/
+
+/* Registers */
+#define NETX_GPIO_REG(ofs)                     __io(NETX_VA_GPIO + (ofs))
+#define NETX_GPIO_CFG(gpio)                NETX_GPIO_REG(0x0  + ((gpio)<<2))
+#define NETX_GPIO_THRESHOLD_CAPTURE(gpio)  NETX_GPIO_REG(0x40 + ((gpio)<<2))
+#define NETX_GPIO_COUNTER_CTRL(counter)    NETX_GPIO_REG(0x80 + ((counter)<<2))
+#define NETX_GPIO_COUNTER_MAX(counter)     NETX_GPIO_REG(0x94 + ((counter)<<2))
+#define NETX_GPIO_COUNTER_CURRENT(counter) NETX_GPIO_REG(0xa8 + ((counter)<<2))
+#define NETX_GPIO_IRQ_ENABLE               NETX_GPIO_REG(0xbc)
+#define NETX_GPIO_IRQ_DISABLE              NETX_GPIO_REG(0xc0)
+#define NETX_GPIO_SYSTIME_NS_CMP           NETX_GPIO_REG(0xc4)
+#define NETX_GPIO_LINE                     NETX_GPIO_REG(0xc8)
+#define NETX_GPIO_IRQ                      NETX_GPIO_REG(0xd0)
+
+/* Bits */
+#define NETX_GPIO_CFG_IOCFG_GP_INPUT                 (0x0)
+#define NETX_GPIO_CFG_IOCFG_GP_OUTPUT                (0x1)
+#define NETX_GPIO_CFG_IOCFG_GP_UART                  (0x2)
+#define NETX_GPIO_CFG_INV                            (1<<2)
+#define NETX_GPIO_CFG_MODE_INPUT_READ                (0<<3)
+#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_CONT_RISING (1<<3)
+#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_ONCE_RISING (2<<3)
+#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_HIGH_LEVEL  (3<<3)
+#define NETX_GPIO_CFG_COUNT_REF_COUNTER0             (0<<5)
+#define NETX_GPIO_CFG_COUNT_REF_COUNTER1             (1<<5)
+#define NETX_GPIO_CFG_COUNT_REF_COUNTER2             (2<<5)
+#define NETX_GPIO_CFG_COUNT_REF_COUNTER3             (3<<5)
+#define NETX_GPIO_CFG_COUNT_REF_COUNTER4             (4<<5)
+#define NETX_GPIO_CFG_COUNT_REF_SYSTIME              (7<<5)
+
+#define NETX_GPIO_COUNTER_CTRL_RUN                   (1<<0)
+#define NETX_GPIO_COUNTER_CTRL_SYM                   (1<<1)
+#define NETX_GPIO_COUNTER_CTRL_ONCE                  (1<<2)
+#define NETX_GPIO_COUNTER_CTRL_IRQ_EN                (1<<3)
+#define NETX_GPIO_COUNTER_CTRL_CNT_EVENT             (1<<4)
+#define NETX_GPIO_COUNTER_CTRL_RST_EN                (1<<5)
+#define NETX_GPIO_COUNTER_CTRL_SEL_EVENT             (1<<6)
+#define NETX_GPIO_COUNTER_CTRL_GPIO_REF /* FIXME */
+
+#define GPIO_BIT(gpio)                     (1<<(gpio))
+#define COUNTER_BIT(counter)               ((1<<16)<<(counter))
+
+/*******************************
+ * PIO                         *
+ *******************************/
+
+/* Registers */
+#define NETX_PIO_REG(ofs)        __io(NETX_VA_PIO + (ofs))
+#define NETX_PIO_INPIO       NETX_PIO_REG(0x0)
+#define NETX_PIO_OUTPIO      NETX_PIO_REG(0x4)
+#define NETX_PIO_OEPIO       NETX_PIO_REG(0x8)
+
+/*******************************
+ * MII Unit                    *
+ *******************************/
+
+/* Registers */
+#define NETX_MIIMU           __io(NETX_VA_MIIMU)
+
+/* Bits */
+#define MIIMU_SNRDY        (1<<0)
+#define MIIMU_PREAMBLE     (1<<1)
+#define MIIMU_OPMODE_WRITE (1<<2)
+#define MIIMU_MDC_PERIOD   (1<<3)
+#define MIIMU_PHY_NRES     (1<<4)
+#define MIIMU_RTA          (1<<5)
+#define MIIMU_REGADDR(adr) (((adr) & 0x1f) << 6)
+#define MIIMU_PHYADDR(adr) (((adr) & 0x1f) << 11)
+#define MIIMU_DATA(data)   (((data) & 0xffff) << 16)
+
+/*******************************
+ * xmac / xpec                 *
+ *******************************/
+
+/* XPEC register offsets relative to NETX_VA_XPEC(no) */
+#define NETX_XPEC_R0_OFS           0x00
+#define NETX_XPEC_R1_OFS           0x04
+#define NETX_XPEC_R2_OFS           0x08
+#define NETX_XPEC_R3_OFS           0x0c
+#define NETX_XPEC_R4_OFS           0x10
+#define NETX_XPEC_R5_OFS           0x14
+#define NETX_XPEC_R6_OFS           0x18
+#define NETX_XPEC_R7_OFS           0x1c
+#define NETX_XPEC_RANGE01_OFS      0x20
+#define NETX_XPEC_RANGE23_OFS      0x24
+#define NETX_XPEC_RANGE45_OFS      0x28
+#define NETX_XPEC_RANGE67_OFS      0x2c
+#define NETX_XPEC_PC_OFS           0x48
+#define NETX_XPEC_TIMER_OFS(timer) (0x30 + ((timer)<<2))
+#define NETX_XPEC_IRQ_OFS          0x8c
+#define NETX_XPEC_SYSTIME_NS_OFS   0x90
+#define NETX_XPEC_FIFO_DATA_OFS    0x94
+#define NETX_XPEC_SYSTIME_S_OFS    0x98
+#define NETX_XPEC_ADC_OFS          0x9c
+#define NETX_XPEC_URX_COUNT_OFS    0x40
+#define NETX_XPEC_UTX_COUNT_OFS    0x44
+#define NETX_XPEC_PC_OFS           0x48
+#define NETX_XPEC_ZERO_OFS         0x4c
+#define NETX_XPEC_STATCFG_OFS      0x50
+#define NETX_XPEC_EC_MASKA_OFS     0x54
+#define NETX_XPEC_EC_MASKB_OFS     0x58
+#define NETX_XPEC_EC_MASK0_OFS     0x5c
+#define NETX_XPEC_EC_MASK8_OFS     0x7c
+#define NETX_XPEC_EC_MASK9_OFS     0x80
+#define NETX_XPEC_XPU_HOLD_PC_OFS  0x100
+#define NETX_XPEC_RAM_START_OFS    0x2000
+
+/* Bits */
+#define XPU_HOLD_PC (1<<0)
+
+/* XMAC register offsets relative to NETX_VA_XMAC(no) */
+#define NETX_XMAC_RPU_PROGRAM_START_OFS       0x000
+#define NETX_XMAC_RPU_PROGRAM_END_OFS         0x3ff
+#define NETX_XMAC_TPU_PROGRAM_START_OFS       0x400
+#define NETX_XMAC_TPU_PROGRAM_END_OFS         0x7ff
+#define NETX_XMAC_RPU_HOLD_PC_OFS             0xa00
+#define NETX_XMAC_TPU_HOLD_PC_OFS             0xa04
+#define NETX_XMAC_STATUS_SHARED0_OFS          0x840
+#define NETX_XMAC_CONFIG_SHARED0_OFS          0x844
+#define NETX_XMAC_STATUS_SHARED1_OFS          0x848
+#define NETX_XMAC_CONFIG_SHARED1_OFS          0x84c
+#define NETX_XMAC_STATUS_SHARED2_OFS          0x850
+#define NETX_XMAC_CONFIG_SHARED2_OFS          0x854
+#define NETX_XMAC_STATUS_SHARED3_OFS          0x858
+#define NETX_XMAC_CONFIG_SHARED3_OFS          0x85c
+
+#define RPU_HOLD_PC            (1<<15)
+#define TPU_HOLD_PC            (1<<15)
+
+/*******************************
+ * Pointer FIFO                *
+ *******************************/
+
+/* Registers */
+#define NETX_PFIFO_REG(ofs)               __io(NETX_VA_PFIFO + (ofs))
+#define NETX_PFIFO_BASE(pfifo)        NETX_PFIFO_REG(0x00 + ((pfifo)<<2))
+#define NETX_PFIFO_BORDER_BASE(pfifo) NETX_PFIFO_REG(0x80 + ((pfifo)<<2))
+#define NETX_PFIFO_RESET              NETX_PFIFO_REG(0x100)
+#define NETX_PFIFO_FULL               NETX_PFIFO_REG(0x104)
+#define NETX_PFIFO_EMPTY              NETX_PFIFO_REG(0x108)
+#define NETX_PFIFO_OVEFLOW            NETX_PFIFO_REG(0x10c)
+#define NETX_PFIFO_UNDERRUN           NETX_PFIFO_REG(0x110)
+#define NETX_PFIFO_FILL_LEVEL(pfifo)  NETX_PFIFO_REG(0x180 + ((pfifo)<<2))
+#define NETX_PFIFO_XPEC_ISR(xpec)     NETX_PFIFO_REG(0x400 + ((xpec) << 2))
+
+/*******************************
+ * Dual Port Memory            *
+ *******************************/
+
+/* Registers */
+#define NETX_DPMAS_REG(ofs)               __io(NETX_VA_DPMAS + (ofs))
+#define NETX_DPMAS_SYS_STAT           NETX_DPMAS_REG(0x4d8)
+#define NETX_DPMAS_INT_STAT           NETX_DPMAS_REG(0x4e0)
+#define NETX_DPMAS_INT_EN             NETX_DPMAS_REG(0x4f0)
+#define NETX_DPMAS_IF_CONF0           NETX_DPMAS_REG(0x608)
+#define NETX_DPMAS_IF_CONF1           NETX_DPMAS_REG(0x60c)
+#define NETX_DPMAS_EXT_CONFIG(cs)     NETX_DPMAS_REG(0x610 + 4 * (cs))
+#define NETX_DPMAS_IO_MODE0           NETX_DPMAS_REG(0x620) /* I/O 32..63 */
+#define NETX_DPMAS_DRV_EN0            NETX_DPMAS_REG(0x624)
+#define NETX_DPMAS_DATA0              NETX_DPMAS_REG(0x628)
+#define NETX_DPMAS_IO_MODE1           NETX_DPMAS_REG(0x630) /* I/O 64..84 */
+#define NETX_DPMAS_DRV_EN1            NETX_DPMAS_REG(0x634)
+#define NETX_DPMAS_DATA1              NETX_DPMAS_REG(0x638)
+
+/* Bits */
+#define NETX_DPMAS_INT_EN_GLB_EN         (1<<31)
+#define NETX_DPMAS_INT_EN_MEM_LCK        (1<<30)
+#define NETX_DPMAS_INT_EN_WDG            (1<<29)
+#define NETX_DPMAS_INT_EN_PIO72          (1<<28)
+#define NETX_DPMAS_INT_EN_PIO47          (1<<27)
+#define NETX_DPMAS_INT_EN_PIO40          (1<<26)
+#define NETX_DPMAS_INT_EN_PIO36          (1<<25)
+#define NETX_DPMAS_INT_EN_PIO35          (1<<24)
+
+#define NETX_DPMAS_IF_CONF0_HIF_DISABLED (0<<28)
+#define NETX_DPMAS_IF_CONF0_HIF_EXT_BUS  (1<<28)
+#define NETX_DPMAS_IF_CONF0_HIF_UP_8BIT  (2<<28)
+#define NETX_DPMAS_IF_CONF0_HIF_UP_16BIT (3<<28)
+#define NETX_DPMAS_IF_CONF0_HIF_IO       (4<<28)
+#define NETX_DPMAS_IF_CONF0_WAIT_DRV_PP  (1<<14)
+#define NETX_DPMAS_IF_CONF0_WAIT_DRV_OD  (2<<14)
+#define NETX_DPMAS_IF_CONF0_WAIT_DRV_TRI (3<<14)
+
+#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO35 (1<<26)
+#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO36 (1<<27)
+#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO40 (1<<28)
+#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO47 (1<<29)
+#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO72 (1<<30)
+
+#define NETX_EXT_CONFIG_TALEWIDTH(x) (((x) & 0x7) << 29)
+#define NETX_EXT_CONFIG_TADRHOLD(x)  (((x) & 0x7) << 26)
+#define NETX_EXT_CONFIG_TCSON(x)     (((x) & 0x7) << 23)
+#define NETX_EXT_CONFIG_TRDON(x)     (((x) & 0x7) << 20)
+#define NETX_EXT_CONFIG_TWRON(x)     (((x) & 0x7)  << 17)
+#define NETX_EXT_CONFIG_TWROFF(x)    (((x) & 0x1f) << 12)
+#define NETX_EXT_CONFIG_TRDWRCYC(x)  (((x) & 0x1f) << 7)
+#define NETX_EXT_CONFIG_WAIT_POL     (1<<6)
+#define NETX_EXT_CONFIG_WAIT_EN      (1<<5)
+#define NETX_EXT_CONFIG_NRD_MODE     (1<<4)
+#define NETX_EXT_CONFIG_DS_MODE      (1<<3)
+#define NETX_EXT_CONFIG_NWR_MODE     (1<<2)
+#define NETX_EXT_CONFIG_16BIT        (1<<1)
+#define NETX_EXT_CONFIG_CS_ENABLE    (1<<0)
+
+#define NETX_DPMAS_IO_MODE0_WRL   (1<<13)
+#define NETX_DPMAS_IO_MODE0_WAIT  (1<<14)
+#define NETX_DPMAS_IO_MODE0_READY (1<<15)
+#define NETX_DPMAS_IO_MODE0_CS0   (1<<19)
+#define NETX_DPMAS_IO_MODE0_EXTRD (1<<20)
+
+#define NETX_DPMAS_IO_MODE1_CS2           (1<<15)
+#define NETX_DPMAS_IO_MODE1_CS1           (1<<16)
+#define NETX_DPMAS_IO_MODE1_SAMPLE_NPOR   (0<<30)
+#define NETX_DPMAS_IO_MODE1_SAMPLE_100MHZ (1<<30)
+#define NETX_DPMAS_IO_MODE1_SAMPLE_NPIO36 (2<<30)
+#define NETX_DPMAS_IO_MODE1_SAMPLE_PIO36  (3<<30)
+
+/*******************************
+ * I2C                         *
+ *******************************/
+#define NETX_I2C_REG(ofs)	__io(NETX_VA_I2C, (ofs))
+#define NETX_I2C_CTRL	NETX_I2C_REG(0x0)
+#define NETX_I2C_DATA	NETX_I2C_REG(0x4)
+
+#endif /* __ASM_ARCH_NETX_REGS_H */
diff --git a/arch/arm/mach-netx/include/mach/param.h b/arch/arm/mach-netx/include/mach/param.h
new file mode 100644
index 0000000..a771459
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/param.h
@@ -0,0 +1,18 @@
+/*
+ *  arch/arm/mach-netx/include/mach/param.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-netx/include/mach/pfifo.h b/arch/arm/mach-netx/include/mach/pfifo.h
new file mode 100644
index 0000000..42c5906
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/pfifo.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-netx/include/mach/pfifo.h
+ *
+ * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+
+#ifndef ASM_ARCH_PFIFO_H
+#define ASM_ARCH_PFIFO_H
+
+static inline int pfifo_push(int no, unsigned int pointer)
+{
+	writel(pointer, NETX_PFIFO_BASE(no));
+	return 0;
+}
+
+static inline unsigned int pfifo_pop(int no)
+{
+	return readl(NETX_PFIFO_BASE(no));
+}
+
+static inline int pfifo_fill_level(int no)
+{
+
+	return readl(NETX_PFIFO_FILL_LEVEL(no));
+}
+
+static inline int pfifo_full(int no)
+{
+	return readl(NETX_PFIFO_FULL) & (1<<no) ? 1 : 0;
+}
+
+static inline int pfifo_empty(int no)
+{
+	return readl(NETX_PFIFO_EMPTY) & (1<<no) ? 1 : 0;
+}
+
+int pfifo_request(unsigned int pfifo_mask);
+void pfifo_free(unsigned int pfifo_mask);
+
+#endif /* ASM_ARCH_PFIFO_H */
diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h
new file mode 100644
index 0000000..27d8ef8
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/system.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-netx/include/mach/system.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+#include <mach/hardware.h>
+#include "netx-regs.h"
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
+	       NETX_SYSTEM_RES_CR);
+}
+
+#endif
+
diff --git a/arch/arm/mach-netx/include/mach/timex.h b/arch/arm/mach-netx/include/mach/timex.h
new file mode 100644
index 0000000..1120dd0
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-netx/include/mach/timex.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE 100000000
diff --git a/arch/arm/mach-netx/include/mach/uncompress.h b/arch/arm/mach-netx/include/mach/uncompress.h
new file mode 100644
index 0000000..84f9128
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/uncompress.h
@@ -0,0 +1,76 @@
+/*
+ * arch/arm/mach-netx/include/mach/uncompress.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  We search for the first enabled
+ * port in the most probable order.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+
+#define REG(x) (*(volatile unsigned long *)(x))
+
+#define UART1_BASE 0x100a00
+#define UART2_BASE 0x100a80
+
+#define UART_DR 0x0
+
+#define UART_CR 0x14
+#define CR_UART_EN (1<<0)
+
+#define UART_FR 0x18
+#define FR_BUSY (1<<3)
+#define FR_TXFF (1<<5)
+
+static void putc(char c)
+{
+	unsigned long base;
+
+	if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
+		base = UART1_BASE;
+	else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
+		base = UART2_BASE;
+	else
+		return;
+
+	while (REG(base + UART_FR) & FR_TXFF);
+	REG(base + UART_DR) = c;
+}
+
+static inline void flush(void)
+{
+	unsigned long base;
+
+	if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
+		base = UART1_BASE;
+	else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
+		base = UART2_BASE;
+	else
+		return;
+
+	while (REG(base + UART_FR) & FR_BUSY);
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-netx/include/mach/vmalloc.h b/arch/arm/mach-netx/include/mach/vmalloc.h
new file mode 100644
index 0000000..25d5cc6
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/vmalloc.h
@@ -0,0 +1,19 @@
+/*
+ *  arch/arm/mach-netx/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-netx/include/mach/xc.h b/arch/arm/mach-netx/include/mach/xc.h
new file mode 100644
index 0000000..0c0011d
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/xc.h
@@ -0,0 +1,42 @@
+/*
+ *  arch/arm/mach-netx/include/mach/xc.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_XC_H
+#define __ASM_ARCH_XC_H
+
+struct xc {
+	int no;
+	unsigned int type;
+	unsigned int version;
+	void __iomem *xpec_base;
+	void __iomem *xmac_base;
+	void __iomem *sram_base;
+	int irq;
+	struct device *dev;
+};
+
+int xc_reset(struct xc *x);
+int xc_stop(struct xc* x);
+int xc_start(struct xc *x);
+int xc_running(struct xc *x);
+int xc_request_firmware(struct xc* x);
+struct xc* request_xc(int xcno, struct device *dev);
+void free_xc(struct xc *x);
+
+#endif /* __ASM_ARCH_XC_H */
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index 0cb1945..c9b174b 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -25,11 +25,11 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/eth.h>
+#include <mach/netx-regs.h>
+#include <mach/eth.h>
 
 #include "generic.h"
 #include "fb.h"
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index 848b2f1..15b54c6 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -25,11 +25,11 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/eth.h>
+#include <mach/netx-regs.h>
+#include <mach/eth.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index cb361ea..1061c01 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -25,11 +25,11 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/eth.h>
+#include <mach/netx-regs.h>
+#include <mach/eth.h>
 
 #include "generic.h"
 #include "fb.h"
diff --git a/arch/arm/mach-netx/pfifo.c b/arch/arm/mach-netx/pfifo.c
index d0e6b43..19ae0a7 100644
--- a/arch/arm/mach-netx/pfifo.c
+++ b/arch/arm/mach-netx/pfifo.c
@@ -22,9 +22,9 @@
 #include <linux/mutex.h>
 
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/pfifo.h>
+#include <mach/hardware.h>
+#include <mach/netx-regs.h>
+#include <mach/pfifo.h>
 
 static DEFINE_MUTEX(pfifo_lock);
 
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index 2c93fd3..ac8e5bfe 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -22,10 +22,10 @@
 #include <linux/irq.h>
 #include <linux/clocksource.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/time.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/netx-regs.h>
 
 /*
  * IRQ handler for the timer
diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c
index 0ea4d3b..04c34e8 100644
--- a/arch/arm/mach-netx/xc.c
+++ b/arch/arm/mach-netx/xc.c
@@ -23,10 +23,10 @@
 #include <linux/mutex.h>
 
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/hardware.h>
+#include <mach/netx-regs.h>
 
-#include <asm/arch/xc.h>
+#include <mach/xc.h>
 
 static DEFINE_MUTEX(xc_lock);
 
diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
index 46b4f5a..a22a608 100644
--- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c
+++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
@@ -13,12 +13,12 @@
 #include <asm/mach/map.h>
 #include <asm/gpio.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/processor-ns9360.h>
-#include <asm/arch/regs-sys-ns9360.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-bbu.h>
-#include <asm/arch/regs-board-a9m9750dev.h>
+#include <mach/board.h>
+#include <mach/processor-ns9360.h>
+#include <mach/regs-sys-ns9360.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-bbu.h>
+#include <mach/regs-board-a9m9750dev.h>
 
 #include "board-a9m9750dev.h"
 
diff --git a/arch/arm/mach-ns9xxx/gpio-ns9360.c b/arch/arm/mach-ns9xxx/gpio-ns9360.c
index 7bc05a4..377330c 100644
--- a/arch/arm/mach-ns9xxx/gpio-ns9360.c
+++ b/arch/arm/mach-ns9xxx/gpio-ns9360.c
@@ -14,8 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 
-#include <asm/arch/regs-bbu.h>
-#include <asm/arch/processor-ns9360.h>
+#include <mach/regs-bbu.h>
+#include <mach/processor-ns9360.h>
 
 #include "gpio-ns9360.h"
 
diff --git a/arch/arm/mach-ns9xxx/gpio.c b/arch/arm/mach-ns9xxx/gpio.c
index ed4c833..804c300 100644
--- a/arch/arm/mach-ns9xxx/gpio.c
+++ b/arch/arm/mach-ns9xxx/gpio.c
@@ -13,9 +13,9 @@
 #include <linux/spinlock.h>
 #include <linux/module.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/processor.h>
-#include <asm/arch/processor-ns9360.h>
+#include <mach/gpio.h>
+#include <mach/processor.h>
+#include <mach/processor-ns9360.h>
 #include <asm/bug.h>
 #include <asm/types.h>
 #include <asm/bitops.h>
diff --git a/arch/arm/mach-ns9xxx/include/mach/board.h b/arch/arm/mach-ns9xxx/include/mach/board.h
new file mode 100644
index 0000000..f7e9196
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/board.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/board.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+#include <asm/mach-types.h>
+
+#define board_is_a9m9750dev()	(0			\
+		|| machine_is_cc9p9360dev()		\
+		|| machine_is_cc9p9750dev()		\
+		)
+
+#define board_is_a9mvali()	(0			\
+		|| machine_is_cc9p9360val() 		\
+		|| machine_is_cc9p9750val()		\
+		)
+
+#define board_is_jscc9p9210()	(0			\
+		|| machine_is_cc9p9210js()		\
+		)
+
+#define board_is_jscc9p9215()	(0			\
+		|| machine_is_cc9p9215js()		\
+		)
+
+#define board_is_jscc9p9360()	(0			\
+		|| machine_is_cc9p9360js()		\
+		)
+
+#define board_is_uncbas()	(0			\
+		|| machine_is_cc7ucamry()		\
+		)
+
+#endif /* ifndef __ASM_ARCH_BOARD_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
new file mode 100644
index 0000000..c9530fb
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/debug-macro.S
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <mach/hardware.h>
+
+#include <mach/regs-board-a9m9750dev.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, =NS9XXX_CSxSTAT_PHYS(0)
+		ldrne	\rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ns9xxx/include/mach/dma.h b/arch/arm/mach-ns9xxx/include/mach/dma.h
new file mode 100644
index 0000000..3f50d8c
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/dma.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/dma.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#endif /* ifndef __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/entry-macro.S b/arch/arm/mach-ns9xxx/include/mach/entry-macro.S
new file mode 100644
index 0000000..71ca031
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/entry-macro.S
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/entry-macro.S
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/regs-sys-common.h>
+
+		.macro	get_irqnr_preamble, base, tmp
+		ldr	\base, =SYS_ISRADDR
+		.endm
+
+		.macro	arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)]
+		cmp	\irqstat, #0
+		ldrne	\irqnr, [\base]
+		.endm
+
+		.macro	disable_fiq
+		.endm
diff --git a/arch/arm/mach-ns9xxx/include/mach/gpio.h b/arch/arm/mach-ns9xxx/include/mach/gpio.h
new file mode 100644
index 0000000..5eb3490
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/gpio.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/gpio.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+*/
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm/errno.h>
+
+int gpio_request(unsigned gpio, const char *label);
+
+void gpio_free(unsigned gpio);
+
+int ns9xxx_gpio_configure(unsigned gpio, int inv, int func);
+
+int gpio_direction_input(unsigned gpio);
+
+int gpio_direction_output(unsigned gpio, int value);
+
+int gpio_get_value(unsigned gpio);
+
+void gpio_set_value(unsigned gpio, int value);
+
+/*
+ * ns9xxx can use gpio pins to trigger an irq, but it's not generic
+ * enough to be supported by the gpio_to_irq/irq_to_gpio interface
+ */
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return -EINVAL;
+}
+
+/* get the cansleep() stubs */
+#include <asm-generic/gpio.h>
+
+#endif /* ifndef __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/hardware.h b/arch/arm/mach-ns9xxx/include/mach/hardware.h
new file mode 100644
index 0000000..6dbb203
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/hardware.h
@@ -0,0 +1,79 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/hardware.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/memory.h>
+
+/*
+ * NetSilicon NS9xxx internal mapping:
+ *
+ * physical                <--> virtual
+ * 0x90000000 - 0x906fffff <--> 0xf9000000 - 0xf96fffff
+ * 0xa0100000 - 0xa0afffff <--> 0xfa100000 - 0xfaafffff
+ */
+#define io_p2v(x)	(0xf0000000 \
+			 + (((x) & 0xf0000000) >> 4) \
+			 + ((x) & 0x00ffffff))
+
+#define io_v2p(x)	((((x) & 0x0f000000) << 4) \
+			 + ((x) & 0x00ffffff))
+
+#define __REGSHIFT(mask)	((mask) & (-(mask)))
+
+#define __REGBIT(bit)		((u32)1 << (bit))
+#define __REGBITS(hbit, lbit)	((((u32)1 << ((hbit) - (lbit) + 1)) - 1) << (lbit))
+#define __REGVAL(mask, value)	(((value) * __REGSHIFT(mask)) & (mask))
+
+#ifndef __ASSEMBLY__
+
+#  define __REG(x)	((void __iomem __force *)io_p2v((x)))
+#  define __REG2(x, y)	((void __iomem __force *)(io_p2v((x)) + 4 * (y)))
+
+#  define __REGSET(var, field, value)					\
+	((var) = (((var) & ~((field) & ~(value))) | (value)))
+
+#  define REGSET(var, reg, field, value)				\
+	__REGSET(var, reg ## _ ## field, reg ## _ ## field ## _ ## value)
+
+#  define REGSET_IDX(var, reg, field, idx, value)			\
+	__REGSET(var, reg ## _ ## field((idx)), reg ## _ ## field ## _ ## value((idx)))
+
+#  define REGSETIM(var, reg, field, value)				\
+	__REGSET(var, reg ## _ ## field, __REGVAL(reg ## _ ## field, (value)))
+
+#  define REGSETIM_IDX(var, reg, field, idx, value)			\
+	__REGSET(var, reg ## _ ## field((idx)), __REGVAL(reg ## _ ## field((idx)), (value)))
+
+#  define __REGGET(var, field)						\
+	(((var) & (field)))
+
+#  define REGGET(var, reg, field)					\
+	 __REGGET(var, reg ## _ ## field)
+
+#  define REGGET_IDX(var, reg, field, idx)				\
+	 __REGGET(var, reg ## _ ## field((idx)))
+
+#  define REGGETIM(var, reg, field)					\
+	 __REGGET(var, reg ## _ ## field) / __REGSHIFT(reg ## _ ## field)
+
+#  define REGGETIM_IDX(var, reg, field, idx)				\
+	 __REGGET(var, reg ## _ ## field((idx))) /			\
+	 __REGSHIFT(reg ## _ ## field((idx)))
+
+#else
+
+#  define __REG(x)	io_p2v(x)
+#  define __REG2(x, y)	io_p2v((x) + 4 * (y))
+
+#endif
+
+#endif /* ifndef __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/io.h b/arch/arm/mach-ns9xxx/include/mach/io.h
new file mode 100644
index 0000000..027bf64
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/io.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT  0xffffffff /* XXX */
+
+#define __io(a)         ((void __iomem *)(a))
+#define __mem_pci(a)    (a)
+#define __mem_isa(a)    (IO_BASE + (a))
+
+#endif /* ifndef __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/irqs.h b/arch/arm/mach-ns9xxx/include/mach/irqs.h
new file mode 100644
index 0000000..1348394
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/irqs.h
@@ -0,0 +1,86 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/irqs.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/* NetSilicon 9360 */
+#define IRQ_NS9XXX_WATCHDOG	0
+#define IRQ_NS9XXX_AHBBUSERR	1
+#define IRQ_NS9360_BBUSAGG	2
+/* irq 3 is reserved for NS9360 */
+#define IRQ_NS9XXX_ETHRX	4
+#define IRQ_NS9XXX_ETHTX	5
+#define IRQ_NS9XXX_ETHPHY	6
+#define IRQ_NS9360_LCD		7
+#define IRQ_NS9360_SERBRX	8
+#define IRQ_NS9360_SERBTX	9
+#define IRQ_NS9360_SERARX	10
+#define IRQ_NS9360_SERATX	11
+#define IRQ_NS9360_SERCRX	12
+#define IRQ_NS9360_SERCTX	13
+#define IRQ_NS9360_I2C		14
+#define IRQ_NS9360_BBUSDMA	15
+#define IRQ_NS9360_TIMER0	16
+#define IRQ_NS9360_TIMER1	17
+#define IRQ_NS9360_TIMER2	18
+#define IRQ_NS9360_TIMER3	19
+#define IRQ_NS9360_TIMER4	20
+#define IRQ_NS9360_TIMER5	21
+#define IRQ_NS9360_TIMER6	22
+#define IRQ_NS9360_TIMER7	23
+#define IRQ_NS9360_RTC		24
+#define IRQ_NS9360_USBHOST	25
+#define IRQ_NS9360_USBDEVICE	26
+#define IRQ_NS9360_IEEE1284	27
+#define IRQ_NS9XXX_EXT0		28
+#define IRQ_NS9XXX_EXT1		29
+#define IRQ_NS9XXX_EXT2		30
+#define IRQ_NS9XXX_EXT3		31
+
+#define BBUS_IRQ(irq)	(32 + irq)
+
+#define IRQ_BBUS_DMA		BBUS_IRQ(0)
+#define IRQ_BBUS_SERBRX		BBUS_IRQ(2)
+#define IRQ_BBUS_SERBTX		BBUS_IRQ(3)
+#define IRQ_BBUS_SERARX		BBUS_IRQ(4)
+#define IRQ_BBUS_SERATX		BBUS_IRQ(5)
+#define IRQ_BBUS_SERCRX		BBUS_IRQ(6)
+#define IRQ_BBUS_SERCTX		BBUS_IRQ(7)
+#define IRQ_BBUS_SERDRX		BBUS_IRQ(8)
+#define IRQ_BBUS_SERDTX		BBUS_IRQ(9)
+#define IRQ_BBUS_I2C		BBUS_IRQ(10)
+#define IRQ_BBUS_1284		BBUS_IRQ(11)
+#define IRQ_BBUS_UTIL		BBUS_IRQ(12)
+#define IRQ_BBUS_RTC		BBUS_IRQ(13)
+#define IRQ_BBUS_USBHST		BBUS_IRQ(14)
+#define IRQ_BBUS_USBDEV		BBUS_IRQ(15)
+#define IRQ_BBUS_AHBDMA1	BBUS_IRQ(24)
+#define IRQ_BBUS_AHBDMA2	BBUS_IRQ(25)
+
+/*
+ * these Interrupts are specific for the a9m9750dev board.
+ * They are generated by an FPGA that interrupts the CPU on
+ * IRQ_NS9360_EXT2
+ */
+#define FPGA_IRQ(irq)	(64 + irq)
+
+#define IRQ_FPGA_UARTA		FPGA_IRQ(0)
+#define IRQ_FPGA_UARTB		FPGA_IRQ(1)
+#define IRQ_FPGA_UARTC		FPGA_IRQ(2)
+#define IRQ_FPGA_UARTD		FPGA_IRQ(3)
+#define IRQ_FPGA_TOUCH		FPGA_IRQ(4)
+#define IRQ_FPGA_CF		FPGA_IRQ(5)
+#define IRQ_FPGA_CAN0		FPGA_IRQ(6)
+#define IRQ_FPGA_CAN1		FPGA_IRQ(7)
+
+#define NR_IRQS	72
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/memory.h b/arch/arm/mach-ns9xxx/include/mach/memory.h
new file mode 100644
index 0000000..649ee62
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/memory.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/memory.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+*/
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/* x in [0..3] */
+#define NS9XXX_CSxSTAT_PHYS(x)	UL(((x) + 4) << 28)
+
+#define NS9XXX_CS0STAT_LENGTH	UL(0x1000)
+#define NS9XXX_CS1STAT_LENGTH	UL(0x1000)
+#define NS9XXX_CS2STAT_LENGTH	UL(0x1000)
+#define NS9XXX_CS3STAT_LENGTH	UL(0x1000)
+
+#define PHYS_OFFSET	UL(0x00000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-ns9xxx/include/mach/module.h b/arch/arm/mach-ns9xxx/include/mach/module.h
new file mode 100644
index 0000000..f851a6b
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/module.h
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/module.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_MODULE_H
+#define __ASM_ARCH_MODULE_H
+
+#include <asm/mach-types.h>
+
+#define module_is_cc7ucamry()	(0			\
+		|| machine_is_cc7ucamry()		\
+		)
+
+#define module_is_cc9c()	(0			\
+		|| machine_is_cc9c()			\
+		)
+
+#define module_is_cc9p9210()	(0			\
+		|| machine_is_cc9p9210()		\
+		|| machine_is_cc9p9210js()		\
+		)
+
+#define module_is_cc9p9215()	(0			\
+		|| machine_is_cc9p9215()		\
+		|| machine_is_cc9p9215js()		\
+		)
+
+#define module_is_cc9p9360()	(0			\
+		|| machine_is_a9m9360()			\
+		|| machine_is_cc9p9360dev()		\
+		|| machine_is_cc9p9360js()		\
+		|| machine_is_cc9p9360val()		\
+		)
+
+#define module_is_cc9p9750()	(0			\
+		|| machine_is_a9m9750()			\
+		|| machine_is_cc9p9750dev()		\
+		|| machine_is_cc9p9750js()		\
+		|| machine_is_cc9p9750val()		\
+		)
+
+#define module_is_ccw9c()	(0			\
+		|| machine_is_ccw9c()			\
+		)
+
+#define module_is_inc20otter()	(0			\
+		|| machine_is_inc20otter()		\
+		)
+
+#define module_is_otter()	(0			\
+		|| machine_is_otter()			\
+		)
+
+#endif /* ifndef __ASM_ARCH_MODULE_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h b/arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h
new file mode 100644
index 0000000..f41deda
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_PROCESSORNS9360_H
+#define __ASM_ARCH_PROCESSORNS9360_H
+
+#include <linux/init.h>
+
+void ns9360_reset(char mode);
+
+unsigned long ns9360_systemclock(void) __attribute__((const));
+
+static inline unsigned long ns9360_cpuclock(void) __attribute__((const));
+static inline unsigned long ns9360_cpuclock(void)
+{
+	return ns9360_systemclock() / 2;
+}
+
+void __init ns9360_map_io(void);
+
+extern struct sys_timer ns9360_timer;
+
+int ns9360_gpio_configure(unsigned gpio, int inv, int func);
+
+#endif /* ifndef __ASM_ARCH_PROCESSORNS9360_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/processor.h b/arch/arm/mach-ns9xxx/include/mach/processor.h
new file mode 100644
index 0000000..9f77f74
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/processor.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/processor.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_PROCESSOR_H
+#define __ASM_ARCH_PROCESSOR_H
+
+#include <mach/module.h>
+
+#define processor_is_ns9210()	(0			\
+		|| module_is_cc7ucamry()		\
+		|| module_is_cc9p9210()			\
+		|| module_is_inc20otter()		\
+		|| module_is_otter()			\
+		)
+
+#define processor_is_ns9215()	(0			\
+		|| module_is_cc9p9215()			\
+		)
+
+#define processor_is_ns9360()	(0			\
+		|| module_is_cc9p9360()			\
+		|| module_is_cc9c()			\
+		|| module_is_ccw9c()			\
+		)
+
+#define processor_is_ns9750()	(0			\
+		|| module_is_cc9p9750()			\
+		)
+
+#define processor_is_ns921x()	(0			\
+		|| processor_is_ns9210()		\
+		|| processor_is_ns9215()		\
+		)
+
+#endif /* ifndef __ASM_ARCH_PROCESSOR_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-bbu.h b/arch/arm/mach-ns9xxx/include/mach/regs-bbu.h
new file mode 100644
index 0000000..af227c0
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-bbu.h
@@ -0,0 +1,45 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/regs-bbu.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSBBU_H
+#define __ASM_ARCH_REGSBBU_H
+
+#include <mach/hardware.h>
+
+/* BBus Utility */
+
+/* GPIO Configuration Registers block 1 */
+/* NOTE: the HRM starts counting at 1 for the GPIO registers, here the start is
+ * at 0 for each block.  That is, BBU_GCONFb1(0) is GPIO Configuration Register
+ * #1, BBU_GCONFb2(0) is GPIO Configuration Register #8. */
+#define BBU_GCONFb1(x)	__REG2(0x90600010, (x))
+#define BBU_GCONFb2(x)	__REG2(0x90600100, (x))
+
+#define BBU_GCONFx_DIR(m)	__REGBIT(3 + (((m) & 7) << 2))
+#define BBU_GCONFx_DIR_INPUT(m)	__REGVAL(BBU_GCONFx_DIR(m), 0)
+#define BBU_GCONFx_DIR_OUTPUT(m)	__REGVAL(BBU_GCONFx_DIR(m), 1)
+#define BBU_GCONFx_INV(m)	__REGBIT(2 + (((m) & 7) << 2))
+#define BBU_GCONFx_INV_NO(m)		__REGVAL(BBU_GCONFx_INV(m), 0)
+#define BBU_GCONFx_INV_YES(m)		__REGVAL(BBU_GCONFx_INV(m), 1)
+#define BBU_GCONFx_FUNC(m)	__REGBITS(1 + (((m) & 7) << 2), ((m) & 7) << 2)
+#define BBU_GCONFx_FUNC_0(m)		__REGVAL(BBU_GCONFx_FUNC(m), 0)
+#define BBU_GCONFx_FUNC_1(m)		__REGVAL(BBU_GCONFx_FUNC(m), 1)
+#define BBU_GCONFx_FUNC_2(m)		__REGVAL(BBU_GCONFx_FUNC(m), 2)
+#define BBU_GCONFx_FUNC_3(m)		__REGVAL(BBU_GCONFx_FUNC(m), 3)
+
+#define BBU_GCTRL1	__REG(0x90600030)
+#define BBU_GCTRL2	__REG(0x90600034)
+#define BBU_GCTRL3	__REG(0x90600120)
+
+#define BBU_GSTAT1	__REG(0x90600040)
+#define BBU_GSTAT2	__REG(0x90600044)
+#define BBU_GSTAT3	__REG(0x90600130)
+
+#endif /* ifndef __ASM_ARCH_REGSBBU_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h b/arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h
new file mode 100644
index 0000000..cd15936
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSBOARDA9M9750_H
+#define __ASM_ARCH_REGSBOARDA9M9750_H
+
+#include <mach/hardware.h>
+
+#define FPGA_UARTA_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0))
+#define FPGA_UARTB_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x08)
+#define FPGA_UARTC_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x10)
+#define FPGA_UARTD_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x18)
+
+#define FPGA_IER	__REG(NS9XXX_CSxSTAT_PHYS(0) + 0x50)
+#define FPGA_ISR	__REG(NS9XXX_CSxSTAT_PHYS(0) + 0x60)
+
+#endif /* ifndef __ASM_ARCH_REGSBOARDA9M9750_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-mem.h b/arch/arm/mach-ns9xxx/include/mach/regs-mem.h
new file mode 100644
index 0000000..f1625bf
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-mem.h
@@ -0,0 +1,135 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/regs-mem.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSMEM_H
+#define __ASM_ARCH_REGSMEM_H
+
+#include <mach/hardware.h>
+
+/* Memory Module */
+
+/* Control register */
+#define MEM_CTRL	__REG(0xa0700000)
+
+/* Status register */
+#define MEM_STAT	__REG(0xa0700004)
+
+/* Configuration register */
+#define MEM_CONF	__REG(0xa0700008)
+
+/* Dynamic Memory Control register */
+#define MEM_DMCTRL	__REG(0xa0700020)
+
+/* Dynamic Memory Refresh Timer */
+#define MEM_DMRT	__REG(0xa0700024)
+
+/* Dynamic Memory Read Configuration register */
+#define MEM_DMRC	__REG(0xa0700028)
+
+/* Dynamic Memory Precharge Command Period (tRP) */
+#define MEM_DMPCP	__REG(0xa0700030)
+
+/* Dynamic Memory Active to Precharge Command Period (tRAS) */
+#define MEM_DMAPCP	__REG(0xa0700034)
+
+/* Dynamic Memory Self-Refresh Exit Time (tSREX) */
+#define MEM_DMSRET	__REG(0xa0700038)
+
+/* Dynamic Memory Last Data Out to Active Time (tAPR) */
+#define MEM_DMLDOAT	__REG(0xa070003c)
+
+/* Dynamic Memory Data-in to Active Command Time (tDAL or TAPW) */
+#define MEM_DMDIACT	__REG(0xa0700040)
+
+/* Dynamic Memory Write Recovery Time (tWR, tDPL, tRWL, tRDL) */
+#define MEM_DMWRT	__REG(0xa0700044)
+
+/* Dynamic Memory Active to Active Command Period (tRC) */
+#define MEM_DMAACP	__REG(0xa0700048)
+
+/* Dynamic Memory Auto Refresh Period, and Auto Refresh to Active Command Period (tRFC) */
+#define MEM_DMARP	__REG(0xa070004c)
+
+/* Dynamic Memory Exit Self-Refresh to Active Command (tXSR) */
+#define MEM_DMESRAC	__REG(0xa0700050)
+
+/* Dynamic Memory Active Bank A to Active B Time (tRRD) */
+#define MEM_DMABAABT	__REG(0xa0700054)
+
+/* Dynamic Memory Load Mode register to Active Command Time (tMRD) */
+#define MEM_DMLMACT	__REG(0xa0700058)
+
+/* Static Memory Extended Wait */
+#define MEM_SMEW	__REG(0xa0700080)
+
+/* Dynamic Memory Configuration Register x */
+#define MEM_DMCONF(x) 	__REG2(0xa0700100, (x) << 3)
+
+/* Dynamic Memory RAS and CAS Delay x */
+#define MEM_DMRCD(x)	__REG2(0xa0700104, (x) << 3)
+
+/* Static Memory Configuration Register x */
+#define MEM_SMC(x)	__REG2(0xa0700200, (x) << 3)
+
+/* Static Memory Configuration Register x: Write protect */
+#define MEM_SMC_PSMC		__REGBIT(20)
+#define MEM_SMC_PSMC_OFF		__REGVAL(MEM_SMC_PSMC, 0)
+#define MEM_SMC_PSMC_ON			__REGVAL(MEM_SMC_PSMC, 1)
+
+/* Static Memory Configuration Register x: Buffer enable */
+#define MEM_SMC_BSMC		__REGBIT(19)
+#define MEM_SMC_BSMC_OFF		__REGVAL(MEM_SMC_BSMC, 0)
+#define MEM_SMC_BSMC_ON			__REGVAL(MEM_SMC_BSMC, 1)
+
+/* Static Memory Configuration Register x: Extended Wait */
+#define MEM_SMC_EW		__REGBIT(8)
+#define MEM_SMC_EW_OFF			__REGVAL(MEM_SMC_EW, 0)
+#define MEM_SMC_EW_ON			__REGVAL(MEM_SMC_EW, 1)
+
+/* Static Memory Configuration Register x: Byte lane state */
+#define MEM_SMC_PB		__REGBIT(7)
+#define MEM_SMC_PB_0			__REGVAL(MEM_SMC_PB, 0)
+#define MEM_SMC_PB_1			__REGVAL(MEM_SMC_PB, 1)
+
+/* Static Memory Configuration Register x: Chip select polarity */
+#define MEM_SMC_PC		__REGBIT(6)
+#define MEM_SMC_PC_AL			__REGVAL(MEM_SMC_PC, 0)
+#define MEM_SMC_PC_AH			__REGVAL(MEM_SMC_PC, 1)
+
+/* static memory configuration register x: page mode*/
+#define MEM_SMC_PM		__REGBIT(3)
+#define MEM_SMC_PM_DIS			__REGVAL(MEM_SMC_PM, 0)
+#define MEM_SMC_PM_ASYNC		__REGVAL(MEM_SMC_PM, 1)
+
+/* static memory configuration register x: Memory width */
+#define MEM_SMC_MW		__REGBITS(1, 0)
+#define MEM_SMC_MW_8			__REGVAL(MEM_SMC_MW, 0)
+#define MEM_SMC_MW_16			__REGVAL(MEM_SMC_MW, 1)
+#define MEM_SMC_MW_32			__REGVAL(MEM_SMC_MW, 2)
+
+/* Static Memory Write Enable Delay x */
+#define MEM_SMWED(x)	__REG2(0xa0700204, (x) << 3)
+
+/* Static Memory Output Enable Delay x */
+#define MEM_SMOED(x)	__REG2(0xa0700208, (x) << 3)
+
+/* Static Memory Read Delay x */
+#define MEM_SMRD(x)	__REG2(0xa070020c, (x) << 3)
+
+/* Static Memory Page Mode Read Delay 0 */
+#define MEM_SMPMRD(x)	__REG2(0xa0700210, (x) << 3)
+
+/* Static Memory Write Delay */
+#define MEM_SMWD(x)	__REG2(0xa0700214, (x) << 3)
+
+/* Static Memory Turn Round Delay x */
+#define MEM_SWT(x)	__REG2(0xa0700218, (x) << 3)
+
+#endif /* ifndef __ASM_ARCH_REGSMEM_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h b/arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h
new file mode 100644
index 0000000..14f91df
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_REGSSYSCOMMON_H
+#define __ASM_ARCH_REGSSYSCOMMON_H
+#include <mach/hardware.h>
+
+/* Interrupt Vector Address Register Level x */
+#define SYS_IVA(x)	__REG2(0xa09000c4, (x))
+
+/* Interrupt Configuration registers */
+#define SYS_IC(x)	__REG2(0xa0900144, (x))
+
+/* ISRADDR */
+#define SYS_ISRADDR     __REG(0xa0900164)
+
+/* Interrupt Status Active */
+#define SYS_ISA		__REG(0xa0900168)
+
+/* Interrupt Status Raw */
+#define SYS_ISR		__REG(0xa090016c)
+
+#endif /* ifndef __ASM_ARCH_REGSSYSCOMMON_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h b/arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h
new file mode 100644
index 0000000..8ff254d
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h
@@ -0,0 +1,148 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSSYSNS9360_H
+#define __ASM_ARCH_REGSSYSNS9360_H
+
+#include <mach/hardware.h>
+
+/* System Control Module */
+
+/* AHB Arbiter Gen Configuration */
+#define SYS_AHBAGENCONF	__REG(0xa0900000)
+
+/* BRC */
+#define SYS_BRC(x)	__REG2(0xa0900004, (x))
+
+/* Timer x Reload Count register */
+#define SYS_TRC(x)	__REG2(0xa0900044, (x))
+
+/* Timer x Read register */
+#define SYS_TR(x)	__REG2(0xa0900084, (x))
+
+/* Timer Interrupt Status register */
+#define SYS_TIS		__REG(0xa0900170)
+
+/* PLL Configuration register */
+#define SYS_PLL		__REG(0xa0900188)
+
+/* PLL FS status */
+#define SYS_PLL_FS		__REGBITS(24, 23)
+
+/* PLL ND status */
+#define SYS_PLL_ND		__REGBITS(20, 16)
+
+/* PLL Configuration register: PLL SW change */
+#define SYS_PLL_SWC		__REGBIT(15)
+#define SYS_PLL_SWC_NO			__REGVAL(SYS_PLL_SWC, 0)
+#define SYS_PLL_SWC_YES			__REGVAL(SYS_PLL_SWC, 1)
+
+/* Timer x Control register */
+#define SYS_TC(x)	__REG2(0xa0900190, (x))
+
+/* Timer x Control register: Timer enable */
+#define SYS_TCx_TEN		__REGBIT(15)
+#define SYS_TCx_TEN_DIS			__REGVAL(SYS_TCx_TEN, 0)
+#define SYS_TCx_TEN_EN			__REGVAL(SYS_TCx_TEN, 1)
+
+/* Timer x Control register: CPU debug mode */
+#define SYS_TCx_TDBG		__REGBIT(10)
+#define SYS_TCx_TDBG_CONT		__REGVAL(SYS_TCx_TDBG, 0)
+#define SYS_TCx_TDBG_STOP		__REGVAL(SYS_TCx_TDBG, 1)
+
+/* Timer x Control register: Interrupt clear */
+#define SYS_TCx_INTC		__REGBIT(9)
+#define SYS_TCx_INTC_UNSET		__REGVAL(SYS_TCx_INTC, 0)
+#define SYS_TCx_INTC_SET		__REGVAL(SYS_TCx_INTC, 1)
+
+/* Timer x Control register: Timer clock select */
+#define SYS_TCx_TLCS		__REGBITS(8, 6)
+#define SYS_TCx_TLCS_CPU		__REGVAL(SYS_TCx_TLCS, 0)	/* CPU clock */
+#define SYS_TCx_TLCS_DIV2		__REGVAL(SYS_TCx_TLCS, 1)	/* CPU clock / 2 */
+#define SYS_TCx_TLCS_DIV4		__REGVAL(SYS_TCx_TLCS, 2)	/* CPU clock / 4 */
+#define SYS_TCx_TLCS_DIV8		__REGVAL(SYS_TCx_TLCS, 3)	/* CPU clock / 8 */
+#define SYS_TCx_TLCS_DIV16		__REGVAL(SYS_TCx_TLCS, 4)	/* CPU clock / 16 */
+#define SYS_TCx_TLCS_DIV32		__REGVAL(SYS_TCx_TLCS, 5)	/* CPU clock / 32 */
+#define SYS_TCx_TLCS_DIV64		__REGVAL(SYS_TCx_TLCS, 6)	/* CPU clock / 64 */
+#define SYS_TCx_TLCS_EXT		__REGVAL(SYS_TCx_TLCS, 7)
+
+/* Timer x Control register: Timer mode */
+#define SYS_TCx_TM		__REGBITS(5, 4)
+#define SYS_TCx_TM_IEE			__REGVAL(SYS_TCx_TM, 0)		/* Internal timer or external event */
+#define SYS_TCx_TM_ELL			__REGVAL(SYS_TCx_TM, 1)		/* External low-level, gated timer */
+#define SYS_TCx_TM_EHL			__REGVAL(SYS_TCx_TM, 2)		/* External high-level, gated timer */
+#define SYS_TCx_TM_CONCAT		__REGVAL(SYS_TCx_TM, 3)		/* Concatenate the lower timer. */
+
+/* Timer x Control register: Interrupt select */
+#define SYS_TCx_INTS		__REGBIT(3)
+#define SYS_TCx_INTS_DIS		__REGVAL(SYS_TCx_INTS, 0)
+#define SYS_TCx_INTS_EN			__REGVAL(SYS_TCx_INTS, 1)
+
+/* Timer x Control register: Up/down select */
+#define SYS_TCx_UDS		__REGBIT(2)
+#define SYS_TCx_UDS_UP			__REGVAL(SYS_TCx_UDS, 0)
+#define SYS_TCx_UDS_DOWN		__REGVAL(SYS_TCx_UDS, 1)
+
+/* Timer x Control register: 32- or 16-bit timer */
+#define SYS_TCx_TSZ		__REGBIT(1)
+#define SYS_TCx_TSZ_16			__REGVAL(SYS_TCx_TSZ, 0)
+#define SYS_TCx_TSZ_32			__REGVAL(SYS_TCx_TSZ, 1)
+
+/* Timer x Control register: Reload enable */
+#define SYS_TCx_REN		__REGBIT(0)
+#define SYS_TCx_REN_DIS			__REGVAL(SYS_TCx_REN, 0)
+#define SYS_TCx_REN_EN			__REGVAL(SYS_TCx_REN, 1)
+
+/* System Memory Chip Select x Dynamic Memory Base */
+#define SYS_SMCSDMB(x)	__REG2(0xa09001d0, (x) << 1)
+
+/* System Memory Chip Select x Dynamic Memory Mask */
+#define SYS_SMCSDMM(x)	__REG2(0xa09001d4, (x) << 1)
+
+/* System Memory Chip Select x Static Memory Base */
+#define SYS_SMCSSMB(x)	__REG2(0xa09001f0, (x) << 1)
+
+/* System Memory Chip Select x Static Memory Base: Chip select x base */
+#define SYS_SMCSSMB_CSxB	__REGBITS(31, 12)
+
+/* System Memory Chip Select x Static Memory Mask */
+#define SYS_SMCSSMM(x)	__REG2(0xa09001f4, (x) << 1)
+
+/* System Memory Chip Select x Static Memory Mask: Chip select x mask */
+#define SYS_SMCSSMM_CSxM	__REGBITS(31, 12)
+
+/* System Memory Chip Select x Static Memory Mask: Chip select x enable */
+#define SYS_SMCSSMM_CSEx	__REGBIT(0)
+#define SYS_SMCSSMM_CSEx_DIS		__REGVAL(SYS_SMCSSMM_CSEx, 0)
+#define SYS_SMCSSMM_CSEx_EN		__REGVAL(SYS_SMCSSMM_CSEx, 1)
+
+/* General purpose, user-defined ID register */
+#define SYS_GENID	__REG(0xa0900210)
+
+/* External Interrupt x Control register */
+#define SYS_EIC(x)	__REG2(0xa0900214, (x))
+
+/* External Interrupt x Control register: Status */
+#define SYS_EIC_STS		__REGBIT(3)
+
+/* External Interrupt x Control register: Clear */
+#define SYS_EIC_CLR		__REGBIT(2)
+
+/* External Interrupt x Control register: Polarity */
+#define SYS_EIC_PLTY		__REGBIT(1)
+#define SYS_EIC_PLTY_AH			__REGVAL(SYS_EIC_PLTY, 0)
+#define SYS_EIC_PLTY_AL			__REGVAL(SYS_EIC_PLTY, 1)
+
+/* External Interrupt x Control register: Level edge */
+#define SYS_EIC_LVEDG		__REGBIT(0)
+#define SYS_EIC_LVEDG_LEVEL		__REGVAL(SYS_EIC_LVEDG, 0)
+#define SYS_EIC_LVEDG_EDGE		__REGVAL(SYS_EIC_LVEDG, 1)
+
+#endif /* ifndef __ASM_ARCH_REGSSYSNS9360_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/system.h b/arch/arm/mach-ns9xxx/include/mach/system.h
new file mode 100644
index 0000000..e2068c5
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/system.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/system.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/proc-fns.h>
+#include <mach/processor.h>
+#include <mach/processor-ns9360.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+#ifdef CONFIG_PROCESSOR_NS9360
+	if (processor_is_ns9360())
+		ns9360_reset(mode);
+	else
+#endif
+		BUG();
+
+	BUG();
+}
+
+#endif /* ifndef __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/timex.h b/arch/arm/mach-ns9xxx/include/mach/timex.h
new file mode 100644
index 0000000..734a8d8
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/timex.h
+ *
+ * Copyright (C) 2005-2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/*
+ * value for CLOCK_TICK_RATE stolen from arch/arm/mach-s3c2410/include/mach/timex.h.
+ * See there for an explanation.
+ */
+#define CLOCK_TICK_RATE         12000000
+
+#endif /* ifndef __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/uncompress.h b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
new file mode 100644
index 0000000..5dbc3c5
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
@@ -0,0 +1,164 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/uncompress.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/io.h>
+
+#define __REG(x)	((void __iomem __force *)(x))
+
+static void putc_dummy(char c, void __iomem *base)
+{
+	/* nothing */
+}
+
+static void putc_ns9360(char c, void __iomem *base)
+{
+	static int t = 0x10000;
+	do {
+		if (t)
+			--t;
+
+		if (__raw_readl(base + 8) & (1 << 3)) {
+			__raw_writeb(c, base + 16);
+			t = 0x10000;
+			break;
+		}
+	} while (t);
+}
+
+static void putc_a9m9750dev(char c, void __iomem *base)
+{
+	static int t = 0x10000;
+	do {
+		if (t)
+			--t;
+
+		if (__raw_readb(base + 5) & (1 << 5)) {
+			__raw_writeb(c, base);
+			t = 0x10000;
+			break;
+		}
+	} while (t);
+
+}
+
+static void putc_ns921x(char c, void __iomem *base)
+{
+	static int t = 0x10000;
+	do {
+		if (t)
+			--t;
+
+		if (!(__raw_readl(base) & (1 << 11))) {
+			__raw_writeb(c, base + 0x0028);
+			t = 0x10000;
+			break;
+		}
+	} while (t);
+}
+
+#define MSCS __REG(0xA0900184)
+
+#define NS9360_UARTA	__REG(0x90200040)
+#define NS9360_UARTB	__REG(0x90200000)
+#define NS9360_UARTC	__REG(0x90300000)
+#define NS9360_UARTD	__REG(0x90300040)
+
+#define NS9360_UART_ENABLED(base)					\
+		(__raw_readl(NS9360_UARTA) & (1 << 31))
+
+#define A9M9750DEV_UARTA	__REG(0x40000000)
+
+#define NS921XSYS_CLOCK	__REG(0xa090017c)
+#define NS921X_UARTA	__REG(0x90010000)
+#define NS921X_UARTB	__REG(0x90018000)
+#define NS921X_UARTC	__REG(0x90020000)
+#define NS921X_UARTD	__REG(0x90028000)
+
+#define NS921X_UART_ENABLED(base)					\
+		(__raw_readl((base) + 0x1000) & (1 << 29))
+
+static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base)
+{
+	if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) {
+		/* ns9360 or ns9750 */
+		if (NS9360_UART_ENABLED(NS9360_UARTA)) {
+			*putc = putc_ns9360;
+			*base = NS9360_UARTA;
+			return;
+		} else if (NS9360_UART_ENABLED(NS9360_UARTB)) {
+			*putc = putc_ns9360;
+			*base = NS9360_UARTB;
+			return;
+		} else if (NS9360_UART_ENABLED(NS9360_UARTC)) {
+			*putc = putc_ns9360;
+			*base = NS9360_UARTC;
+			return;
+		} else if (NS9360_UART_ENABLED(NS9360_UARTD)) {
+			*putc = putc_ns9360;
+			*base = NS9360_UARTD;
+			return;
+		} else if (__raw_readl(__REG(0xa09001f4)) == 0xfffff001) {
+			*putc = putc_a9m9750dev;
+			*base = A9M9750DEV_UARTA;
+			return;
+		}
+	} else if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x02) {
+		/* ns921x */
+		u32 clock = __raw_readl(NS921XSYS_CLOCK);
+
+		if ((clock & (1 << 1)) &&
+				NS921X_UART_ENABLED(NS921X_UARTA)) {
+			*putc = putc_ns921x;
+			*base = NS921X_UARTA;
+			return;
+		} else if ((clock & (1 << 2)) &&
+				NS921X_UART_ENABLED(NS921X_UARTB)) {
+			*putc = putc_ns921x;
+			*base = NS921X_UARTB;
+			return;
+		} else if ((clock & (1 << 3)) &&
+				NS921X_UART_ENABLED(NS921X_UARTC)) {
+			*putc = putc_ns921x;
+			*base = NS921X_UARTC;
+			return;
+		} else if ((clock & (1 << 4)) &&
+				NS921X_UART_ENABLED(NS921X_UARTD)) {
+			*putc = putc_ns921x;
+			*base = NS921X_UARTD;
+			return;
+		}
+	}
+
+	*putc = putc_dummy;
+}
+
+void (*myputc)(char, void __iomem *);
+void __iomem *base;
+
+static void putc(char c)
+{
+	myputc(c, base);
+}
+
+static void arch_decomp_setup(void)
+{
+	autodetect(&myputc, &base);
+}
+#define arch_decomp_wdog()
+
+static void flush(void)
+{
+	/* nothing */
+}
+
+#endif /* ifndef __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/vmalloc.h b/arch/arm/mach-ns9xxx/include/mach/vmalloc.h
new file mode 100644
index 0000000..fe964d3
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/vmalloc.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END     (0xf0000000)
+
+#endif /* ifndef __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c
index 96de8ebe..38260d5 100644
--- a/arch/arm/mach-ns9xxx/irq.c
+++ b/arch/arm/mach-ns9xxx/irq.c
@@ -12,9 +12,9 @@
 #include <linux/kernel_stat.h>
 #include <asm/io.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/regs-sys-common.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/board.h>
+#include <mach/regs-sys-common.h>
+#include <mach/irqs.h>
+#include <mach/board.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
index 7714233..2858417 100644
--- a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
+++ b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
@@ -11,7 +11,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/processor-ns9360.h>
+#include <mach/processor-ns9360.h>
 
 #include "board-a9m9750dev.h"
 #include "generic.h"
diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c
index bdbd0bb..729f68d 100644
--- a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c
+++ b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c
@@ -11,7 +11,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/processor-ns9360.h>
+#include <mach/processor-ns9360.h>
 
 #include "board-jscc9p9360.h"
 #include "generic.h"
diff --git a/arch/arm/mach-ns9xxx/plat-serial8250.c b/arch/arm/mach-ns9xxx/plat-serial8250.c
index c9cce9b..795b15e 100644
--- a/arch/arm/mach-ns9xxx/plat-serial8250.c
+++ b/arch/arm/mach-ns9xxx/plat-serial8250.c
@@ -11,8 +11,8 @@
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 
-#include <asm/arch/regs-board-a9m9750dev.h>
-#include <asm/arch/board.h>
+#include <mach/regs-board-a9m9750dev.h>
+#include <mach/board.h>
 
 #define DRIVER_NAME "serial8250"
 
diff --git a/arch/arm/mach-ns9xxx/processor-ns9360.c b/arch/arm/mach-ns9xxx/processor-ns9360.c
index 8ee81b5..abee833 100644
--- a/arch/arm/mach-ns9xxx/processor-ns9360.c
+++ b/arch/arm/mach-ns9xxx/processor-ns9360.c
@@ -14,8 +14,8 @@
 
 #include <asm/page.h>
 #include <asm/mach/map.h>
-#include <asm/arch/processor-ns9360.h>
-#include <asm/arch/regs-sys-ns9360.h>
+#include <mach/processor-ns9360.h>
+#include <mach/regs-sys-ns9360.h>
 
 void ns9360_reset(char mode)
 {
diff --git a/arch/arm/mach-ns9xxx/time-ns9360.c b/arch/arm/mach-ns9xxx/time-ns9360.c
index 66bd582..a63424d0 100644
--- a/arch/arm/mach-ns9xxx/time-ns9360.c
+++ b/arch/arm/mach-ns9xxx/time-ns9360.c
@@ -15,10 +15,10 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 
-#include <asm/arch/processor-ns9360.h>
-#include <asm/arch/regs-sys-ns9360.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/system.h>
+#include <mach/processor-ns9360.h>
+#include <mach/regs-sys-ns9360.h>
+#include <mach/irqs.h>
+#include <mach/system.h>
 #include "generic.h"
 
 #define TIMER_CLOCKSOURCE 0
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 46488c2..2e61839 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -17,18 +17,18 @@
 #include <linux/input.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/board-ams-delta.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
+#include <mach/board-ams-delta.h>
+#include <mach/gpio.h>
+#include <mach/keypad.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
 
 static u8 ams_delta_latch1_reg;
 static u16 ams_delta_latch2_reg;
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 8583e80..db78946 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -20,21 +20,21 @@
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
-#include <asm/arch/board-fsample.h>
+#include <mach/tc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
+#include <mach/nand.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/board.h>
+#include <mach/board-fsample.h>
 
 static int fsample_keymap[] = {
 	KEY(0,0,KEY_UP),
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index d902662..7d26702 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -17,16 +17,16 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
 
 static void __init omap_generic_init_irq(void)
 {
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index 6fdc784..ab9ee58 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -12,8 +12,8 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
 
 #ifdef CONFIG_MMC_OMAP
 static int slot_cover_open;
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index f69e3b5..3b65914 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -29,7 +29,7 @@
 #include <linux/input.h>
 #include <linux/i2c/tps65010.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/gpio.h>
 
 #include <asm/mach-types.h>
@@ -37,16 +37,16 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio-switch.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/gpio-switch.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/nand.h>
+#include <mach/irda.h>
+#include <mach/usb.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 static int h2_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 66ecc43..3608581 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -12,8 +12,8 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
 
 #ifdef CONFIG_MMC_OMAP
 static int slot_cover_open;
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 1ae3826..2ced6d9 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -31,7 +31,7 @@
 
 #include <asm/setup.h>
 #include <asm/page.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/gpio.h>
 
 #include <asm/mach-types.h>
@@ -39,18 +39,18 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpioexpander.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/gpioexpander.h>
+#include <mach/irqs.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/nand.h>
+#include <mach/irda.h>
+#include <mach/usb.h>
+#include <mach/keypad.h>
+#include <mach/dma.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 #define H3_TS_GPIO	48
 
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 667c720..cbc11be 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -24,21 +24,21 @@
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
+#include <mach/tc.h>
+#include <mach/usb.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 static int innovator_keymap[] = {
 	KEY(0, 0, KEY_F1),
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 2826214..38d9783 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -20,21 +20,21 @@
 #include <linux/workqueue.h>
 #include <linux/delay.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/dsp_common.h>
-#include <asm/arch/aic23.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/lcd_mipid.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/dsp_common.h>
+#include <mach/aic23.h>
+#include <mach/omapfb.h>
+#include <mach/lcd_mipid.h>
 
 #define ADS7846_PENDOWN_GPIO	15
 
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 4d8cd9f..3e766e4 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -39,7 +39,7 @@
 
 #include <linux/i2c/tps65010.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/gpio.h>
 
 #include <asm/mach-types.h>
@@ -47,12 +47,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/usb.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/usb.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 static struct mtd_partition osk_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
@@ -340,7 +340,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
-#include <asm/arch/keypad.h>
+#include <mach/keypad.h>
 
 static const int osk_keymap[] = {
 	/* KEY(col, row, code) */
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 6855255..b580436 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -27,23 +27,23 @@
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/board.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/tc.h>
+#include <mach/dma.h>
+#include <mach/board.h>
+#include <mach/irda.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 static void __init omap_palmte_init_irq(void)
 {
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 96896f8..40f9860 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -23,24 +23,24 @@
 #include <linux/mtd/partitions.h>
 #include <linux/leds.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/led.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/led.h>
+#include <mach/mcbsp.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/dma.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/irda.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/omap-alsa.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index b8ccdb2..e719294 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -26,23 +26,23 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/mcbsp.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/dma.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/irda.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/omap-alsa.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 9857fc9..b715917 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -20,20 +20,20 @@
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
+#include <mach/tc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
+#include <mach/nand.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/board.h>
 
 static int p2_keymap[] = {
 	KEY(0,0,KEY_UP),
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 8c93d4771..0be4eba 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -12,9 +12,9 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
 
 #ifdef CONFIG_MMC_OMAP
 static int slot_cover_open;
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 0c2c42b..130bcc6 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -26,22 +26,22 @@
 #include <linux/i2c.h>
 #include <linux/errno.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
-#include <asm/arch/keypad.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/irda.h>
+#include <mach/usb.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
+#include <mach/keypad.h>
 
 /* Write to I2C device */
 int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 902b12e..213b487 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -22,17 +22,17 @@
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/usb.h>
+#include <mach/common.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/usb.h>
 
 static struct plat_serial8250_port voiceblue_ports[] = {
 	{
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 4ea2933..5965cf0 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -21,10 +21,10 @@
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/cpu.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/cpu.h>
+#include <mach/usb.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
 
 #include "clock.h"
 
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 9ad8f92..ab708d4 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -14,14 +14,14 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index b9649c7..4449d86 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -22,13 +22,13 @@
 #include <linux/device.h>
 #include <linux/errno.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
 
 static void fpga_mask_irq(unsigned int irq)
 {
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 81c4e73..2b9750b 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -15,8 +15,8 @@
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
 #include <asm/io.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
 
 extern int omap1_clk_init(void);
 extern void omap_check_revision(void);
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 061f073..0ec6c1ec 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -41,11 +41,11 @@
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
 
 #include <asm/io.h>
 
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index c9e894a..610f51f 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -14,13 +14,13 @@
 #include <linux/sched.h>
 
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c
index 82eacb0..9b99c28 100644
--- a/arch/arm/mach-omap1/leds-innovator.c
+++ b/arch/arm/mach-omap1/leds-innovator.c
@@ -3,7 +3,7 @@
  */
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
index 1cd94e0..98e7896 100644
--- a/arch/arm/mach-omap1/leds-osk.c
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -5,11 +5,11 @@
  */
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 3f9dcac..6cdad93 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -9,8 +9,8 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index bad1e71..af44eab 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -13,8 +13,8 @@
 #include <linux/resource.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <asm/arch/mailbox.h>
-#include <asm/arch/irqs.h>
+#include <mach/mailbox.h>
+#include <mach/irqs.h>
 #include <asm/io.h>
 
 #define MAILBOX_ARM2DSP1		0x00
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 2d2c252..826010d 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -17,11 +17,11 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/dsp_common.h>
+#include <mach/dma.h>
+#include <mach/mux.h>
+#include <mach/cpu.h>
+#include <mach/mcbsp.h>
+#include <mach/dsp_common.h>
 
 #define DPS_RSTCT2_PER_EN	(1 << 0)
 #define DSP_RSTCT2_WD_PER_EN	(1 << 1)
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index e207bf7..898516e 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -28,7 +28,7 @@
 #include <asm/io.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index bb06de9..63c4ea1 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -48,15 +48,15 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/cpu.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/dmtimer.h>
+#include <mach/cpu.h>
+#include <mach/irqs.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/tc.h>
+#include <mach/pm.h>
+#include <mach/mux.h>
+#include <mach/dma.h>
+#include <mach/dmtimer.h>
 
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
 static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 10a4fe8..0e25a99 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -22,12 +22,12 @@
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/fpga.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
+#include <mach/fpga.h>
 #ifdef CONFIG_PM
-#include <asm/arch/pm.h>
+#include <mach/pm.h>
 #endif
 
 static struct clk * uart1_ck;
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index 68f5b39..f3eac93 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -34,8 +34,8 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/arch/pm.h>
+#include <mach/io.h>
+#include <mach/pm.h>
 
 		.text
 
diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S
index 776c89c..261cdc4 100644
--- a/arch/arm/mach-omap1/sram.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -10,8 +10,8 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/io.h>
+#include <mach/hardware.h>
 
 	.text
 
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index ae89103..e547085 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -45,7 +45,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index f358fe9..e677601 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -46,13 +46,13 @@
 #include <linux/clockchips.h>
 
 #include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/dmtimer.h>
+#include <mach/dmtimer.h>
 
 struct sys_timer omap_timer;
 
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 8911f8e..d4d6385 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -22,17 +22,17 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/gpmc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpmc.h>
 
 #include <asm/io.h>
 
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 170c968..989ad15 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -29,19 +29,19 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/led.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/gpmc.h>
-#include <asm/arch/control.h>
+#include <mach/gpio.h>
+#include <mach/led.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpmc.h>
+#include <mach/control.h>
 
 /* LED & Switch macros */
 #define LED0_GPIO13		13
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 68ec3a3..9ba0978 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -20,16 +20,16 @@
 #include <linux/init.h>
 #include <linux/device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
 
 static void __init omap_generic_init_irq(void)
 {
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index a32b475..9e2624c 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -22,24 +22,24 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/gpioexpander.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/menelaus.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/gpmc.h>
+#include <mach/control.h>
+#include <mach/gpio.h>
+#include <mach/gpioexpander.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/irda.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/keypad.h>
+#include <mach/menelaus.h>
+#include <mach/dma.h>
+#include <mach/gpmc.h>
 
 #include <asm/io.h>
 
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 15675bce..1d891e4 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -25,9 +25,9 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/cpu.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/cpu.h>
 #include <asm/div64.h>
 
 #include "memory.h"
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 3cd37cb..626e5fa 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -16,7 +16,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK_H
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 /* The maximum error between a target DPLL rate and the rounded rate in Hz */
 #define DEFAULT_DPLL_RATE_TOLERANCE	50000
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index aa56787..295e671 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -28,8 +28,8 @@
 #include <linux/io.h>
 #include <linux/cpufreq.h>
 
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
 #include <asm/div64.h>
 #include <asm/bitops.h>
 
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 4263099..3ff7495 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -26,8 +26,8 @@
 #include <linux/io.h>
 #include <linux/limits.h>
 
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
 #include <asm/div64.h>
 #include <asm/bitops.h>
 
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 05757eb..ec66445 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -19,7 +19,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
 
-#include <asm/arch/control.h>
+#include <mach/control.h>
 
 #include "clock.h"
 #include "cm.h"
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 51f7030..5f3aad9 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -15,8 +15,8 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/control.h>
+#include <mach/common.h>
+#include <mach/control.h>
 
 static void __iomem *omap2_ctrl_base;
 
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index a6acdcd..7a7f025 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -14,15 +14,15 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
 
 #if	defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
 
@@ -142,7 +142,7 @@
 
 #if defined(CONFIG_SPI_OMAP24XX)
 
-#include <asm/arch/mcspi.h>
+#include <mach/mcspi.h>
 
 #define OMAP2_MCSPI1_BASE		0x48098000
 #define OMAP2_MCSPI2_BASE		0x4809a000
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index dbf68dc..f51d69b 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -18,7 +18,7 @@
 
 #include <asm/io.h>
 #include <asm/mach-types.h>
-#include <asm/arch/gpmc.h>
+#include <mach/gpmc.h>
 
 #undef DEBUG
 
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index dff4b16..a5d4526 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -17,8 +17,8 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/cpu.h>
+#include <mach/control.h>
+#include <mach/cpu.h>
 
 #if defined(CONFIG_ARCH_OMAP2420)
 #define TAP_BASE	io_p2v(0x48014000)
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 69c8174..987351f 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -21,8 +21,8 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/arch/mux.h>
-#include <asm/arch/omapfb.h>
+#include <mach/mux.h>
+#include <mach/omapfb.h>
 
 extern void omap_sram_init(void);
 extern int omap2_clk_init(void);
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 6d4c4bf..9ef15b3 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -13,7 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 #include <asm/irq.h>
 #include <asm/io.h>
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 4799561..a480b96 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -14,8 +14,8 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
-#include <asm/arch/mailbox.h>
-#include <asm/arch/irqs.h>
+#include <mach/mailbox.h>
+#include <mach/irqs.h>
 #include <asm/io.h>
 
 #define MAILBOX_REVISION		0x00
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 17cf199..27eb6e3 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -17,10 +17,10 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/dma.h>
+#include <mach/mux.h>
+#include <mach/cpu.h>
+#include <mach/mcbsp.h>
 
 struct mcbsp_internal_clk {
 	struct clk clk;
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index 73cadb2..6b49cc9 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -24,9 +24,9 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/common.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
 
 #include "prm.h"
 
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 8f98b20..443d07f 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -29,8 +29,8 @@
 #include <asm/io.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/mux.h>
+#include <mach/control.h>
+#include <mach/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 5e6e595..8671e10 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -31,10 +31,10 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/irqs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/pm.h>
+#include <mach/irqs.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/pm.h>
 
 static struct clk *vclk;
 static void (*omap2_sram_idle)(void);
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index fd92a80..f945156d 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -18,8 +18,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/prcm.h>
+#include <mach/common.h>
+#include <mach/prcm.h>
 
 #include "clock.h"
 #include "prm.h"
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 1b1fe4f..1a8bbd0 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -15,7 +15,7 @@
  */
 #undef DEBUG
 
-#include <asm/arch/sdrc.h>
+#include <mach/sdrc.h>
 
 #ifndef __ASSEMBLER__
 extern void __iomem *omap2_sdrc_base;
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index e9c367f..adc8a26a 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -20,8 +20,8 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
+#include <mach/common.h>
+#include <mach/board.h>
 
 static struct clk * uart1_ick = NULL;
 static struct clk * uart1_fck = NULL;
diff --git a/arch/arm/mach-omap2/sleep.S b/arch/arm/mach-omap2/sleep.S
index 46ccb9b..87a706f 100644
--- a/arch/arm/mach-omap2/sleep.S
+++ b/arch/arm/mach-omap2/sleep.S
@@ -23,8 +23,8 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/arch/pm.h>
+#include <mach/io.h>
+#include <mach/pm.h>
 
 #include "sdrc.h"
 
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index 229a9284..af4bd34 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -24,8 +24,8 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/io.h>
+#include <mach/hardware.h>
 
 #include "prm.h"
 #include "cm.h"
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index 1665ebb..84363e2 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -24,8 +24,8 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/io.h>
+#include <mach/hardware.h>
 
 #include "prm.h"
 #include "cm.h"
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 557603f..589393b 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -34,7 +34,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/mach/time.h>
-#include <asm/arch/dmtimer.h>
+#include <mach/dmtimer.h>
 
 static struct omap_dm_timer *gptimer;
 static struct clock_event_device clockevent_gpt;
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 80bb42e..1607c94 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -15,9 +15,9 @@
 
 #include <linux/usb/musb.h>
 
-#include <asm/arch/gpmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
+#include <mach/gpmc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
 
 
 static u8		async_cs, sync_cs;
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index 9a3cc00..bea3797 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -13,7 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mbus.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index faf4e32..168eeac 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -24,8 +24,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/orion5x.h>
+#include <mach/hardware.h>
+#include <mach/orion5x.h>
 #include <asm/plat-orion/ehci-orion.h>
 #include <asm/plat-orion/orion_nand.h>
 #include <asm/plat-orion/time.h>
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 40a0bee..48ce6d0 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -24,7 +24,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include <asm/plat-orion/orion_nand.h>
 #include "common.h"
 #include "mpp.h"
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 3791ca6..1a1d84b 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -25,7 +25,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-orion5x/gpio.c b/arch/arm/mach-orion5x/gpio.c
index d097979..cd8a16f 100644
--- a/arch/arm/mach-orion5x/gpio.c
+++ b/arch/arm/mach-orion5x/gpio.c
@@ -17,7 +17,7 @@
 #include <linux/bitops.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 
 static DEFINE_SPINLOCK(gpio_lock);
diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S
new file mode 100644
index 0000000..c7f808bf
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/orion5x.h>
+
+	.macro  addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =ORION5X_REGS_PHYS_BASE
+	ldrne	\rx, =ORION5X_REGS_VIRT_BASE
+	orr	\rx, \rx, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-kirkwood/dma.h b/arch/arm/mach-orion5x/include/mach/dma.h
similarity index 100%
copy from include/asm-arm/arch-kirkwood/dma.h
copy to arch/arm/mach-orion5x/include/mach/dma.h
diff --git a/arch/arm/mach-orion5x/include/mach/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S
new file mode 100644
index 0000000..4351937
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/entry-macro.S
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Orion platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/orion5x.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =MAIN_IRQ_CAUSE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\irqstat, [\base, #0]		@ main cause
+	ldr	\tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask
+	mov	\irqnr, #0			@ default irqnr
+	@ find cause bits that are unmasked
+	ands	\irqstat, \irqstat, \tmp	@ clear Z flag if any
+	clzne	\irqnr,	\irqstat		@ calc irqnr
+	rsbne	\irqnr, \irqnr, #31
+	.endm
diff --git a/arch/arm/mach-orion5x/include/mach/gpio.h b/arch/arm/mach-orion5x/include/mach/gpio.h
new file mode 100644
index 0000000..65dc136
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/gpio.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/gpio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+extern int gpio_request(unsigned pin, const char *label);
+extern void gpio_free(unsigned pin);
+extern int gpio_direction_input(unsigned pin);
+extern int gpio_direction_output(unsigned pin, int value);
+extern int gpio_get_value(unsigned pin);
+extern void gpio_set_value(unsigned pin, int value);
+extern void orion5x_gpio_set_blink(unsigned pin, int blink);
+extern void gpio_display(void);		/* debug */
+
+static inline int gpio_to_irq(int pin)
+{
+	return pin + IRQ_ORION5X_GPIO_START;
+}
+
+static inline int irq_to_gpio(int irq)
+{
+	return irq - IRQ_ORION5X_GPIO_START;
+}
+
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
diff --git a/arch/arm/mach-orion5x/include/mach/hardware.h b/arch/arm/mach-orion5x/include/mach/hardware.h
new file mode 100644
index 0000000..e51aaf4
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "orion5x.h"
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO		0x00001000
+#define PCIBIOS_MIN_MEM		0x01000000
+#define PCIMEM_BASE		ORION5X_PCIE_MEM_PHYS_BASE
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h
new file mode 100644
index 0000000..f24b251
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/io.h
@@ -0,0 +1,63 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/io.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "orion5x.h"
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+static inline void __iomem *
+__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
+{
+	void __iomem *retval;
+	unsigned long offs = paddr - ORION5X_REGS_PHYS_BASE;
+	if (mtype == MT_DEVICE && size && offs < ORION5X_REGS_SIZE &&
+	    size <= ORION5X_REGS_SIZE && offs + size <= ORION5X_REGS_SIZE) {
+		retval = (void __iomem *)ORION5X_REGS_VIRT_BASE + offs;
+	} else {
+		retval = __arm_ioremap(paddr, size, mtype);
+	}
+
+	return retval;
+}
+
+static inline void
+__arch_iounmap(void __iomem *addr)
+{
+	if (addr < (void __iomem *)ORION5X_REGS_VIRT_BASE ||
+	    addr >= (void __iomem *)(ORION5X_REGS_VIRT_BASE + ORION5X_REGS_SIZE))
+		__iounmap(addr);
+}
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+
+#define __arch_ioremap(p, s, m)	__arch_ioremap(p, s, m)
+#define __arch_iounmap(a)	__arch_iounmap(a)
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+
+/*****************************************************************************
+ * Helpers to access Orion registers
+ ****************************************************************************/
+/*
+ * These are not preempt-safe.  Locks, if needed, must be taken
+ * care of by the caller.
+ */
+#define orion5x_setbits(r, mask)	writel(readl(r) | (mask), (r))
+#define orion5x_clrbits(r, mask)	writel(readl(r) & ~(mask), (r))
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/irqs.h b/arch/arm/mach-orion5x/include/mach/irqs.h
new file mode 100644
index 0000000..d5b0fbf
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/irqs.h
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/irqs.h
+ *
+ * IRQ definitions for Orion SoC
+ *
+ *  Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ *  This file is licensed under the terms of the GNU General Public
+ *  License version 2. This program is licensed "as is" without any
+ *  warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "orion5x.h"	/* need GPIO_MAX */
+
+/*
+ * Orion Main Interrupt Controller
+ */
+#define IRQ_ORION5X_BRIDGE		0
+#define IRQ_ORION5X_DOORBELL_H2C	1
+#define IRQ_ORION5X_DOORBELL_C2H	2
+#define IRQ_ORION5X_UART0		3
+#define IRQ_ORION5X_UART1		4
+#define IRQ_ORION5X_I2C			5
+#define IRQ_ORION5X_GPIO_0_7		6
+#define IRQ_ORION5X_GPIO_8_15		7
+#define IRQ_ORION5X_GPIO_16_23		8
+#define IRQ_ORION5X_GPIO_24_31		9
+#define IRQ_ORION5X_PCIE0_ERR		10
+#define IRQ_ORION5X_PCIE0_INT		11
+#define IRQ_ORION5X_USB1_CTRL		12
+#define IRQ_ORION5X_DEV_BUS_ERR		14
+#define IRQ_ORION5X_PCI_ERR		15
+#define IRQ_ORION5X_USB_BR_ERR		16
+#define IRQ_ORION5X_USB0_CTRL		17
+#define IRQ_ORION5X_ETH_RX		18
+#define IRQ_ORION5X_ETH_TX		19
+#define IRQ_ORION5X_ETH_MISC		20
+#define IRQ_ORION5X_ETH_SUM		21
+#define IRQ_ORION5X_ETH_ERR		22
+#define IRQ_ORION5X_IDMA_ERR		23
+#define IRQ_ORION5X_IDMA_0		24
+#define IRQ_ORION5X_IDMA_1		25
+#define IRQ_ORION5X_IDMA_2		26
+#define IRQ_ORION5X_IDMA_3		27
+#define IRQ_ORION5X_CESA		28
+#define IRQ_ORION5X_SATA		29
+#define IRQ_ORION5X_XOR0		30
+#define IRQ_ORION5X_XOR1		31
+
+/*
+ * Orion General Purpose Pins
+ */
+#define IRQ_ORION5X_GPIO_START	32
+#define NR_GPIO_IRQS		GPIO_MAX
+
+#define NR_IRQS			(IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/memory.h b/arch/arm/mach-orion5x/include/mach/memory.h
new file mode 100644
index 0000000..54dd76b
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/memory.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/memory.h
+ *
+ * Marvell Orion memory definitions
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET	UL(0x00000000)
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
new file mode 100644
index 0000000..f52a7d6
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -0,0 +1,162 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/orion5x.h
+ *
+ * Generic definitions of Orion SoC flavors:
+ *  Orion-1, Orion-VoIP, Orion-NAS, and Orion-2.
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_ORION5X_H
+#define __ASM_ARCH_ORION5X_H
+
+/*****************************************************************************
+ * Orion Address Maps
+ *
+ * phys
+ * e0000000	PCIe MEM space
+ * e8000000	PCI MEM space
+ * f0000000	PCIe WA space (Orion-1/Orion-NAS only)
+ * f1000000	on-chip peripheral registers
+ * f2000000	PCIe I/O space
+ * f2100000	PCI I/O space
+ * f4000000	device bus mappings (boot)
+ * fa000000	device bus mappings (cs0)
+ * fa800000	device bus mappings (cs2)
+ * fc000000	device bus mappings (cs0/cs1)
+ *
+ * virt		phys		size
+ * fdd00000	f1000000	1M	on-chip peripheral registers
+ * fde00000	f2000000	1M	PCIe I/O space
+ * fdf00000	f2100000	1M	PCI I/O space
+ * fe000000	f0000000	16M	PCIe WA space (Orion-1/Orion-NAS only)
+ ****************************************************************************/
+#define ORION5X_REGS_PHYS_BASE		0xf1000000
+#define ORION5X_REGS_VIRT_BASE		0xfdd00000
+#define ORION5X_REGS_SIZE		SZ_1M
+
+#define ORION5X_PCIE_IO_PHYS_BASE	0xf2000000
+#define ORION5X_PCIE_IO_VIRT_BASE	0xfde00000
+#define ORION5X_PCIE_IO_BUS_BASE	0x00000000
+#define ORION5X_PCIE_IO_SIZE		SZ_1M
+
+#define ORION5X_PCI_IO_PHYS_BASE	0xf2100000
+#define ORION5X_PCI_IO_VIRT_BASE	0xfdf00000
+#define ORION5X_PCI_IO_BUS_BASE		0x00100000
+#define ORION5X_PCI_IO_SIZE		SZ_1M
+
+/* Relevant only for Orion-1/Orion-NAS */
+#define ORION5X_PCIE_WA_PHYS_BASE	0xf0000000
+#define ORION5X_PCIE_WA_VIRT_BASE	0xfe000000
+#define ORION5X_PCIE_WA_SIZE		SZ_16M
+
+#define ORION5X_PCIE_MEM_PHYS_BASE	0xe0000000
+#define ORION5X_PCIE_MEM_SIZE		SZ_128M
+
+#define ORION5X_PCI_MEM_PHYS_BASE	0xe8000000
+#define ORION5X_PCI_MEM_SIZE		SZ_128M
+
+/*******************************************************************************
+ * Supported Devices & Revisions
+ ******************************************************************************/
+/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
+#define MV88F5181_DEV_ID	0x5181
+#define MV88F5181_REV_B1	3
+#define MV88F5181L_REV_A0	8
+#define MV88F5181L_REV_A1	9
+/* Orion-NAS (88F5182) */
+#define MV88F5182_DEV_ID	0x5182
+#define MV88F5182_REV_A2	2
+/* Orion-2 (88F5281) */
+#define MV88F5281_DEV_ID	0x5281
+#define MV88F5281_REV_D1	5
+#define MV88F5281_REV_D2	6
+
+/*******************************************************************************
+ * Orion Registers Map
+ ******************************************************************************/
+#define ORION5X_DDR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x00000)
+#define ORION5X_DDR_REG(x)		(ORION5X_DDR_VIRT_BASE | (x))
+
+#define ORION5X_DEV_BUS_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x10000)
+#define ORION5X_DEV_BUS_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x10000)
+#define ORION5X_DEV_BUS_REG(x)		(ORION5X_DEV_BUS_VIRT_BASE | (x))
+#define  I2C_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
+#define  UART0_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
+#define  UART0_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2000)
+#define  UART1_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2100)
+#define  UART1_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
+
+#define ORION5X_BRIDGE_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x20000)
+#define ORION5X_BRIDGE_REG(x)		(ORION5X_BRIDGE_VIRT_BASE | (x))
+#define  TIMER_VIRT_BASE		(ORION5X_BRIDGE_VIRT_BASE | 0x300)
+
+#define ORION5X_PCI_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x30000)
+#define ORION5X_PCI_REG(x)		(ORION5X_PCI_VIRT_BASE | (x))
+
+#define ORION5X_PCIE_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x40000)
+#define ORION5X_PCIE_REG(x)		(ORION5X_PCIE_VIRT_BASE | (x))
+
+#define ORION5X_USB0_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x50000)
+#define ORION5X_USB0_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x50000)
+#define ORION5X_USB0_REG(x)		(ORION5X_USB0_VIRT_BASE | (x))
+
+#define ORION5X_ETH_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x70000)
+#define ORION5X_ETH_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x70000)
+#define ORION5X_ETH_REG(x)		(ORION5X_ETH_VIRT_BASE | (x))
+
+#define ORION5X_SATA_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x80000)
+#define ORION5X_SATA_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x80000)
+#define ORION5X_SATA_REG(x)		(ORION5X_SATA_VIRT_BASE | (x))
+
+#define ORION5X_USB1_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0xa0000)
+#define ORION5X_USB1_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0xa0000)
+#define ORION5X_USB1_REG(x)		(ORION5X_USB1_VIRT_BASE | (x))
+
+/*******************************************************************************
+ * Device Bus Registers
+ ******************************************************************************/
+#define MPP_0_7_CTRL		ORION5X_DEV_BUS_REG(0x000)
+#define MPP_8_15_CTRL		ORION5X_DEV_BUS_REG(0x004)
+#define MPP_16_19_CTRL		ORION5X_DEV_BUS_REG(0x050)
+#define MPP_DEV_CTRL		ORION5X_DEV_BUS_REG(0x008)
+#define MPP_RESET_SAMPLE	ORION5X_DEV_BUS_REG(0x010)
+#define GPIO_OUT		ORION5X_DEV_BUS_REG(0x100)
+#define GPIO_IO_CONF		ORION5X_DEV_BUS_REG(0x104)
+#define GPIO_BLINK_EN		ORION5X_DEV_BUS_REG(0x108)
+#define GPIO_IN_POL		ORION5X_DEV_BUS_REG(0x10c)
+#define GPIO_DATA_IN		ORION5X_DEV_BUS_REG(0x110)
+#define GPIO_EDGE_CAUSE		ORION5X_DEV_BUS_REG(0x114)
+#define GPIO_EDGE_MASK		ORION5X_DEV_BUS_REG(0x118)
+#define GPIO_LEVEL_MASK		ORION5X_DEV_BUS_REG(0x11c)
+#define DEV_BANK_0_PARAM	ORION5X_DEV_BUS_REG(0x45c)
+#define DEV_BANK_1_PARAM	ORION5X_DEV_BUS_REG(0x460)
+#define DEV_BANK_2_PARAM	ORION5X_DEV_BUS_REG(0x464)
+#define DEV_BANK_BOOT_PARAM	ORION5X_DEV_BUS_REG(0x46c)
+#define DEV_BUS_CTRL		ORION5X_DEV_BUS_REG(0x4c0)
+#define DEV_BUS_INT_CAUSE	ORION5X_DEV_BUS_REG(0x4d0)
+#define DEV_BUS_INT_MASK	ORION5X_DEV_BUS_REG(0x4d4)
+#define GPIO_MAX		32
+
+/***************************************************************************
+ * Orion CPU Bridge Registers
+ **************************************************************************/
+#define CPU_CONF		ORION5X_BRIDGE_REG(0x100)
+#define CPU_CTRL		ORION5X_BRIDGE_REG(0x104)
+#define CPU_RESET_MASK		ORION5X_BRIDGE_REG(0x108)
+#define CPU_SOFT_RESET		ORION5X_BRIDGE_REG(0x10c)
+#define POWER_MNG_CTRL_REG	ORION5X_BRIDGE_REG(0x11C)
+#define BRIDGE_CAUSE		ORION5X_BRIDGE_REG(0x110)
+#define BRIDGE_MASK		ORION5X_BRIDGE_REG(0x114)
+#define  BRIDGE_INT_TIMER0	0x0002
+#define  BRIDGE_INT_TIMER1	0x0004
+#define  BRIDGE_INT_TIMER1_CLR	(~0x0004)
+#define MAIN_IRQ_CAUSE		ORION5X_BRIDGE_REG(0x200)
+#define MAIN_IRQ_MASK		ORION5X_BRIDGE_REG(0x204)
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
new file mode 100644
index 0000000..08e4307
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/system.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/system.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/orion5x.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * Enable and issue soft reset
+	 */
+	orion5x_setbits(CPU_RESET_MASK, (1 << 2));
+	orion5x_setbits(CPU_SOFT_RESET, 1);
+}
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/timex.h b/arch/arm/mach-orion5x/include/mach/timex.h
new file mode 100644
index 0000000..e82e44d
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/timex.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/timex.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)
+
+#define ORION5X_TCLK		166666667
diff --git a/arch/arm/mach-orion5x/include/mach/uncompress.h b/arch/arm/mach-orion5x/include/mach/uncompress.h
new file mode 100644
index 0000000..4322dba
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/uncompress.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/uncompress.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/orion5x.h>
+
+#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+	unsigned char *base = SERIAL_BASE;
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		if (base[UART_LSR << 2] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+	unsigned char *base = SERIAL_BASE;
+	unsigned char mask;
+	int i;
+
+	mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+	for (i = 0; i < 0x1000; i++) {
+		if ((base[UART_LSR << 2] & mask) == mask)
+			break;
+		barrier();
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-orion5x/include/mach/vmalloc.h b/arch/arm/mach-orion5x/include/mach/vmalloc.h
new file mode 100644
index 0000000..7147a29
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END       0xfd800000
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index 9ae3f6d..cc2a017 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -15,7 +15,7 @@
 #include <linux/irq.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include <asm/plat-orion/irq.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 84feac4..0caaaac 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -24,7 +24,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include <asm/plat-orion/orion_nand.h>
 #include "common.h"
 #include "mpp.h"
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index 8eadc9b..c04ab0e 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mbus.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include "common.h"
 #include "mpp.h"
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 7ce9e40..4403cc9 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -25,7 +25,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 55f3b0f..67b2c0d 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -22,7 +22,7 @@
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 73e9242..e72fe1e 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -21,7 +21,7 @@
 #include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index ac48201..a1fe3257 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -22,7 +22,7 @@
 #include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 2a46d27..8771cb7 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -24,7 +24,7 @@
 #include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index f270ada..809132d 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -26,7 +26,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 #include "tsx09-common.h"
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 32f0ff0..6053e76 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -24,7 +24,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 #include "tsx09-common.h"
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 77e9f35..014916a 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -18,7 +18,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 25568c2..b6bc43e 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -19,7 +19,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 9b8ee8c..b10da17 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -19,7 +19,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c
index 576e9a4..24d036a 100644
--- a/arch/arm/mach-pnx4008/clock.c
+++ b/arch/arm/mach-pnx4008/clock.c
@@ -21,10 +21,10 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 #include "clock.h"
 
 /*forward declaration*/
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index 156d8fa..3ba46ed 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -26,7 +26,7 @@
 #include <linux/device.h>
 #include <linux/spi/spi.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/irq.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/dma.h>
+#include <mach/irq.h>
+#include <mach/clock.h>
+#include <mach/dma.h>
 
 struct resource spipnx_0_resources[] = {
 	{
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
index fee0d25..833c56be 100644
--- a/arch/arm/mach-pnx4008/dma.c
+++ b/arch/arm/mach-pnx4008/dma.c
@@ -23,12 +23,12 @@
 #include <linux/clk.h>
 
 #include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 #include <asm/dma-mapping.h>
 #include <asm/io.h>
 #include <asm/mach/dma.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 static struct dma_channel {
 	char *name;
diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c
index ef179ca..fb51f72 100644
--- a/arch/arm/mach-pnx4008/gpio.c
+++ b/arch/arm/mach-pnx4008/gpio.c
@@ -18,8 +18,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <asm/io.h>
-#include <asm/arch/platform.h>
-#include <asm/arch/gpio.h>
+#include <mach/platform.h>
+#include <mach/gpio.h>
 
 /* register definitions */
 #define PIO_VA_BASE	IO_ADDRESS(PNX4008_PIO_BASE)
diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c
index 6f30882..87c0932 100644
--- a/arch/arm/mach-pnx4008/i2c.c
+++ b/arch/arm/mach-pnx4008/i2c.c
@@ -14,8 +14,8 @@
 #include <linux/i2c-pnx.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
-#include <asm/arch/platform.h>
-#include <asm/arch/i2c.h>
+#include <mach/platform.h>
+#include <mach/i2c.h>
 
 static int set_clock_run(struct platform_device *pdev)
 {
diff --git a/arch/arm/mach-pnx4008/include/mach/clock.h b/arch/arm/mach-pnx4008/include/mach/clock.h
new file mode 100644
index 0000000..8d2a5ef
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/clock.h
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/clock.h
+ *
+ * Clock control driver for PNX4008 - header file
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __PNX4008_CLOCK_H__
+#define __PNX4008_CLOCK_H__
+
+struct module;
+struct clk;
+
+#define PWRMAN_VA_BASE		IO_ADDRESS(PNX4008_PWRMAN_BASE)
+#define HCLKDIVCTRL_REG		(PWRMAN_VA_BASE + 0x40)
+#define PWRCTRL_REG		(PWRMAN_VA_BASE + 0x44)
+#define PLLCTRL_REG		(PWRMAN_VA_BASE + 0x48)
+#define OSC13CTRL_REG		(PWRMAN_VA_BASE + 0x4c)
+#define SYSCLKCTRL_REG		(PWRMAN_VA_BASE + 0x50)
+#define HCLKPLLCTRL_REG		(PWRMAN_VA_BASE + 0x58)
+#define USBCTRL_REG		(PWRMAN_VA_BASE + 0x64)
+#define SDRAMCLKCTRL_REG	(PWRMAN_VA_BASE + 0x68)
+#define MSCTRL_REG		(PWRMAN_VA_BASE + 0x80)
+#define BTCLKCTRL		(PWRMAN_VA_BASE + 0x84)
+#define DUMCLKCTRL_REG		(PWRMAN_VA_BASE + 0x90)
+#define I2CCLKCTRL_REG		(PWRMAN_VA_BASE + 0xac)
+#define KEYCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb0)
+#define TSCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb4)
+#define PWMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb8)
+#define TIMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xbc)
+#define SPICTRL_REG		(PWRMAN_VA_BASE + 0xc4)
+#define FLASHCLKCTRL_REG	(PWRMAN_VA_BASE + 0xc8)
+#define UART3CLK_REG		(PWRMAN_VA_BASE + 0xd0)
+#define UARTCLKCTRL_REG		(PWRMAN_VA_BASE + 0xe4)
+#define DMACLKCTRL_REG		(PWRMAN_VA_BASE + 0xe8)
+#define AUTOCLK_CTRL		(PWRMAN_VA_BASE + 0xec)
+#define JPEGCLKCTRL_REG		(PWRMAN_VA_BASE + 0xfc)
+
+#define AUDIOCONFIG_VA_BASE	IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE)
+#define DSPPLLCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x60)
+#define DSPCLKCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x64)
+#define AUDIOCLKCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x68)
+#define AUDIOPLLCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x6C)
+
+#define USB_OTG_CLKCTRL_REG	IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4)
+
+#define VFP9CLKCTRL_REG		IO_ADDRESS(PNX4008_DEBUG_BASE)
+
+#define CLK_RATE_13MHZ 13000
+#define CLK_RATE_1MHZ 1000
+#define CLK_RATE_208MHZ 208000
+#define CLK_RATE_48MHZ 48000
+#define CLK_RATE_32KHZ 32
+
+#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
new file mode 100644
index 0000000..6d1407f
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -0,0 +1,23 @@
+/* arch/arm/mach-pnx4008/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		mov	\rx, #0x00090000
+		addeq	\rx, \rx, #0x40000000
+		addne	\rx, \rx, #0xf4000000
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-pnx4008/include/mach/dma.h b/arch/arm/mach-pnx4008/include/mach/dma.h
new file mode 100644
index 0000000..5442d04
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/dma.h
@@ -0,0 +1,162 @@
+/*
+ *  arch/arm/mach-pnx4008/include/mach/dma.h
+ *
+ *  PNX4008 DMA header file
+ *
+ *  Author:	Vitaly Wool
+ *  Copyright:	MontaVista Software Inc. (c) 2005
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include "platform.h"
+
+#define MAX_DMA_ADDRESS		0xffffffff
+
+#define MAX_DMA_CHANNELS	8
+
+#define DMAC_BASE		IO_ADDRESS(PNX4008_DMA_CONFIG_BASE)
+#define DMAC_INT_STAT		(DMAC_BASE + 0x0000)
+#define DMAC_INT_TC_STAT	(DMAC_BASE + 0x0004)
+#define DMAC_INT_TC_CLEAR	(DMAC_BASE + 0x0008)
+#define DMAC_INT_ERR_STAT	(DMAC_BASE + 0x000c)
+#define DMAC_INT_ERR_CLEAR	(DMAC_BASE + 0x0010)
+#define DMAC_SOFT_SREQ		(DMAC_BASE + 0x0024)
+#define DMAC_CONFIG		(DMAC_BASE + 0x0030)
+#define DMAC_Cx_SRC_ADDR(c)	(DMAC_BASE + 0x0100 + (c) * 0x20)
+#define DMAC_Cx_DEST_ADDR(c)	(DMAC_BASE + 0x0104 + (c) * 0x20)
+#define DMAC_Cx_LLI(c)		(DMAC_BASE + 0x0108 + (c) * 0x20)
+#define DMAC_Cx_CONTROL(c)	(DMAC_BASE + 0x010c + (c) * 0x20)
+#define DMAC_Cx_CONFIG(c)	(DMAC_BASE + 0x0110 + (c) * 0x20)
+
+enum {
+	WIDTH_BYTE = 0,
+	WIDTH_HWORD,
+	WIDTH_WORD
+};
+
+enum {
+	FC_MEM2MEM_DMA,
+	FC_MEM2PER_DMA,
+	FC_PER2MEM_DMA,
+	FC_PER2PER_DMA,
+	FC_PER2PER_DPER,
+	FC_MEM2PER_PER,
+	FC_PER2MEM_PER,
+	FC_PER2PER_SPER
+};
+
+enum {
+	DMA_INT_UNKNOWN = 0,
+	DMA_ERR_INT = 1,
+	DMA_TC_INT = 2,
+};
+
+enum {
+	DMA_BUFFER_ALLOCATED = 1,
+	DMA_HAS_LL = 2,
+};
+
+enum {
+	PER_CAM_DMA_1 = 0,
+	PER_NDF_FLASH = 1,
+	PER_MBX_SLAVE_FIFO = 2,
+	PER_SPI2_REC_XMIT = 3,
+	PER_MS_SD_RX_XMIT = 4,
+	PER_HS_UART_1_XMIT = 5,
+	PER_HS_UART_1_RX = 6,
+	PER_HS_UART_2_XMIT = 7,
+	PER_HS_UART_2_RX = 8,
+	PER_HS_UART_7_XMIT = 9,
+	PER_HS_UART_7_RX = 10,
+	PER_SPI1_REC_XMIT = 11,
+	PER_MLC_NDF_SREC = 12,
+	PER_CAM_DMA_2 = 13,
+	PER_PRNG_INFIFO = 14,
+	PER_PRNG_OUTFIFO = 15,
+};
+
+struct pnx4008_dma_ch_ctrl {
+	int tc_mask;
+	int cacheable;
+	int bufferable;
+	int priv_mode;
+	int di;
+	int si;
+	int dest_ahb1;
+	int src_ahb1;
+	int dwidth;
+	int swidth;
+	int dbsize;
+	int sbsize;
+	int tr_size;
+};
+
+struct pnx4008_dma_ch_config {
+	int halt;
+	int active;
+	int lock;
+	int itc;
+	int ie;
+	int flow_cntrl;
+	int dest_per;
+	int src_per;
+};
+
+struct pnx4008_dma_ll {
+	unsigned long src_addr;
+	unsigned long dest_addr;
+	u32 next_dma;
+	unsigned long ch_ctrl;
+	struct pnx4008_dma_ll *next;
+	int flags;
+	void *alloc_data;
+	int (*free) (void *);
+};
+
+struct pnx4008_dma_config {
+	int is_ll;
+	unsigned long src_addr;
+	unsigned long dest_addr;
+	unsigned long ch_ctrl;
+	unsigned long ch_cfg;
+	struct pnx4008_dma_ll *ll;
+	u32 ll_dma;
+	int flags;
+	void *alloc_data;
+	int (*free) (void *);
+};
+
+extern struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t *);
+extern void pnx4008_free_ll_entry(struct pnx4008_dma_ll *, dma_addr_t);
+extern void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll *);
+
+extern int pnx4008_request_channel(char *, int,
+				   void (*)(int, int, void *),
+				   void *);
+extern void pnx4008_free_channel(int);
+extern int pnx4008_config_dma(int, int, int);
+extern int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl *,
+				    unsigned long *);
+extern int pnx4008_dma_parse_control(unsigned long,
+				     struct pnx4008_dma_ch_ctrl *);
+extern int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config *,
+				   unsigned long *);
+extern int pnx4008_dma_parse_config(unsigned long,
+				    struct pnx4008_dma_ch_config *);
+extern int pnx4008_config_channel(int, struct pnx4008_dma_config *);
+extern int pnx4008_channel_get_config(int, struct pnx4008_dma_config *);
+extern int pnx4008_dma_ch_enable(int);
+extern int pnx4008_dma_ch_disable(int);
+extern int pnx4008_dma_ch_enabled(int);
+extern void pnx4008_dma_split_head_entry(struct pnx4008_dma_config *,
+					 struct pnx4008_dma_ch_ctrl *);
+extern void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll *,
+				       struct pnx4008_dma_ch_ctrl *);
+
+#endif				/* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/entry-macro.S b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
new file mode 100644
index 0000000..8003037
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for PNX4008-based platforms
+ *
+ * 2005-2006 (c) MontaVista Software, Inc.
+ * Author: Vitaly Wool <vwool@ru.mvista.com>
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "platform.h"
+
+#define IO_BASE         0xF0000000
+#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
+
+#define INTRC_MASK			0x00
+#define INTRC_RAW_STAT			0x04
+#define INTRC_STAT			0x08
+#define INTRC_POLAR			0x0C
+#define INTRC_ACT_TYPE			0x10
+#define INTRC_TYPE			0x14
+
+#define SIC1_BASE_INT   32
+#define SIC2_BASE_INT   64
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+/* decode the MIC interrupt numbers */
+		ldr	\base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
+		ldr	\irqstat, [\base, #INTRC_STAT]
+
+		cmp	\irqstat,#1<<16
+		movhs	\irqnr,#16
+		movlo	\irqnr,#0
+		movhs	\irqstat,\irqstat,lsr#16
+		cmp	\irqstat,#1<<8
+		addhs	\irqnr,\irqnr,#8
+		movhs	\irqstat,\irqstat,lsr#8
+		cmp	\irqstat,#1<<4
+		addhs	\irqnr,\irqnr,#4
+		movhs	\irqstat,\irqstat,lsr#4
+		cmp	\irqstat,#1<<2
+		addhs	\irqnr,\irqnr,#2
+		movhs	\irqstat,\irqstat,lsr#2
+		cmp	\irqstat,#1<<1
+		addhs	\irqnr,\irqnr,#1
+
+/* was there an interrupt ? if not then drop out with EQ status */
+		teq	\irqstat,#0
+		beq	1003f
+
+/* and now check for extended IRQ reasons */
+		cmp	\irqnr,#1
+		bls	1003f
+		cmp	\irqnr,#30
+		blo	1002f
+
+/* IRQ 31,30  : High priority cascade IRQ handle */
+/* read the correct SIC */
+/* decoding status after compare : eq is 30 (SIC1) , ne is 31 (SIC2) */
+/* set the base IRQ number */
+		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
+		moveq  \irqnr,#SIC1_BASE_INT
+		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
+		movne   \irqnr,#SIC2_BASE_INT
+		ldr	\irqstat, [\base, #INTRC_STAT]
+		ldr	\tmp,	  [\base, #INTRC_TYPE]
+/* and with inverted mask : low priority interrupts  */
+		and	\irqstat,\irqstat,\tmp
+		b	1004f
+
+1003:
+/* IRQ 1,0  : Low priority cascade IRQ handle */
+/* read the correct SIC */
+/* decoding status after compare : eq is 1 (SIC2) , ne is 0 (SIC1)*/
+/* read the correct SIC */
+/* set the base IRQ number  */
+		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
+		movne   \irqnr,#SIC1_BASE_INT
+		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
+		moveq   \irqnr,#SIC2_BASE_INT
+		ldr	\irqstat, [\base, #INTRC_STAT]
+		ldr	\tmp,	  [\base, #INTRC_TYPE]
+/* and with inverted mask : low priority interrupts  */
+		bic	\irqstat,\irqstat,\tmp
+
+1004:
+
+		cmp	\irqstat,#1<<16
+		addhs	\irqnr,\irqnr,#16
+		movhs	\irqstat,\irqstat,lsr#16
+		cmp	\irqstat,#1<<8
+		addhs	\irqnr,\irqnr,#8
+		movhs	\irqstat,\irqstat,lsr#8
+		cmp	\irqstat,#1<<4
+		addhs	\irqnr,\irqnr,#4
+		movhs	\irqstat,\irqstat,lsr#4
+		cmp	\irqstat,#1<<2
+		addhs	\irqnr,\irqnr,#2
+		movhs	\irqstat,\irqstat,lsr#2
+		cmp	\irqstat,#1<<1
+		addhs	\irqnr,\irqnr,#1
+
+
+/* is irqstat not zero */
+
+1002:
+/* we assert that irqstat is not equal to zero and return ne status if true*/
+		teq	\irqstat,#0
+1003:
+		.endm
+
+
+		.macro	irq_prio_table
+		.endm
+
+
diff --git a/arch/arm/mach-pnx4008/include/mach/gpio.h b/arch/arm/mach-pnx4008/include/mach/gpio.h
new file mode 100644
index 0000000..9591467
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/gpio.h
@@ -0,0 +1,241 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/gpio.h
+ *
+ * PNX4008 GPIO driver - header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
+ * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef _PNX4008_GPIO_H_
+#define _PNX4008_GPIO_H_
+
+
+/* Block numbers */
+#define GPIO_IN		(0)
+#define GPIO_OUT		(0x100)
+#define GPIO_BID		(0x200)
+#define GPIO_RAM		(0x300)
+#define GPIO_MUX		(0x400)
+
+#define GPIO_TYPE_MASK(K) ((K) & 0x700)
+
+/* INPUT GPIOs */
+/* GPI */
+#define GPI_00		(GPIO_IN | 0)
+#define GPI_01		(GPIO_IN | 1)
+#define GPI_02   	(GPIO_IN | 2)
+#define GPI_03 	 	(GPIO_IN | 3)
+#define GPI_04   	(GPIO_IN | 4)
+#define GPI_05   	(GPIO_IN | 5)
+#define GPI_06   	(GPIO_IN | 6)
+#define GPI_07   	(GPIO_IN | 7)
+#define GPI_08   	(GPIO_IN | 8)
+#define GPI_09   	(GPIO_IN | 9)
+#define U1_RX 		(GPIO_IN | 15)
+#define U2_HTCS 	(GPIO_IN | 16)
+#define U2_RX	 	(GPIO_IN | 17)
+#define U3_RX		(GPIO_IN | 18)
+#define U4_RX		(GPIO_IN | 19)
+#define U5_RX		(GPIO_IN | 20)
+#define U6_IRRX 	(GPIO_IN | 21)
+#define U7_HCTS 	(GPIO_IN | 22)
+#define U7_RX		(GPIO_IN | 23)
+/* MISC IN */
+#define SPI1_DATIN	(GPIO_IN | 25)
+#define DISP_SYNC	(GPIO_IN | 26)
+#define SPI2_DATIN	(GPIO_IN | 27)
+#define GPI_11  	(GPIO_IN | 28)
+
+#define GPIO_IN_MASK   0x1eff83ff
+
+/* OUTPUT GPIOs */
+/* GPO */
+#define GPO_00		(GPIO_OUT | 0)
+#define GPO_01   	(GPIO_OUT | 1)
+#define GPO_02   	(GPIO_OUT | 2)
+#define GPO_03 	 	(GPIO_OUT | 3)
+#define GPO_04   	(GPIO_OUT | 4)
+#define GPO_05   	(GPIO_OUT | 5)
+#define GPO_06   	(GPIO_OUT | 6)
+#define GPO_07   	(GPIO_OUT | 7)
+#define GPO_08		(GPIO_OUT | 8)
+#define GPO_09   	(GPIO_OUT | 9)
+#define GPO_10   	(GPIO_OUT | 10)
+#define GPO_11 	 	(GPIO_OUT | 11)
+#define GPO_12   	(GPIO_OUT | 12)
+#define GPO_13   	(GPIO_OUT | 13)
+#define GPO_14   	(GPIO_OUT | 14)
+#define GPO_15   	(GPIO_OUT | 15)
+#define GPO_16  	(GPIO_OUT | 16)
+#define GPO_17 	 	(GPIO_OUT | 17)
+#define GPO_18   	(GPIO_OUT | 18)
+#define GPO_19   	(GPIO_OUT | 19)
+#define GPO_20   	(GPIO_OUT | 20)
+#define GPO_21   	(GPIO_OUT | 21)
+#define GPO_22   	(GPIO_OUT | 22)
+#define GPO_23   	(GPIO_OUT | 23)
+
+#define GPIO_OUT_MASK   0xffffff
+
+/* BIDIRECTIONAL GPIOs */
+/* RAM pins */
+#define RAM_D19		(GPIO_RAM | 0)
+#define RAM_D20  	(GPIO_RAM | 1)
+#define RAM_D21  	(GPIO_RAM | 2)
+#define RAM_D22 	(GPIO_RAM | 3)
+#define RAM_D23  	(GPIO_RAM | 4)
+#define RAM_D24  	(GPIO_RAM | 5)
+#define RAM_D25  	(GPIO_RAM | 6)
+#define RAM_D26  	(GPIO_RAM | 7)
+#define RAM_D27		(GPIO_RAM | 8)
+#define RAM_D28  	(GPIO_RAM | 9)
+#define RAM_D29  	(GPIO_RAM | 10)
+#define RAM_D30 	(GPIO_RAM | 11)
+#define RAM_D31  	(GPIO_RAM | 12)
+
+#define GPIO_RAM_MASK   0x1fff
+
+/* I/O pins */
+#define GPIO_00  	(GPIO_BID | 25)
+#define GPIO_01 	(GPIO_BID | 26)
+#define GPIO_02  	(GPIO_BID | 27)
+#define GPIO_03  	(GPIO_BID | 28)
+#define GPIO_04 	(GPIO_BID | 29)
+#define GPIO_05  	(GPIO_BID | 30)
+
+#define GPIO_BID_MASK   0x7e000000
+
+/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */
+#define GPIO_SDRAM_SEL 	(GPIO_MUX | 3)
+
+#define GPIO_MUX_MASK   0x8
+
+/* Extraction/assembly macros */
+#define GPIO_BIT_MASK(K) ((K) & 0x1F)
+#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K))
+#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK))
+#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK))
+#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK))
+#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK))
+#define GPIO_ISIN(K)  ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK))
+
+/* Start Enable Pin Interrupts - table 58 page 66 */
+
+#define SE_PIN_BASE_INT   32
+
+#define SE_U7_RX_INT            63
+#define SE_U7_HCTS_INT          62
+#define SE_BT_CLKREQ_INT        61
+#define SE_U6_IRRX_INT          60
+/*59 unused*/
+#define SE_U5_RX_INT            58
+#define SE_GPI_11_INT           57
+#define SE_U3_RX_INT            56
+#define SE_U2_HCTS_INT          55
+#define SE_U2_RX_INT            54
+#define SE_U1_RX_INT            53
+#define SE_DISP_SYNC_INT        52
+/*51 unused*/
+#define SE_SDIO_INT_N           50
+#define SE_MSDIO_START_INT      49
+#define SE_GPI_06_INT           48
+#define SE_GPI_05_INT           47
+#define SE_GPI_04_INT           46
+#define SE_GPI_03_INT           45
+#define SE_GPI_02_INT           44
+#define SE_GPI_01_INT           43
+#define SE_GPI_00_INT           42
+#define SE_SYSCLKEN_PIN_INT     41
+#define SE_SPI1_DATAIN_INT      40
+#define SE_GPI_07_INT           39
+#define SE_SPI2_DATAIN_INT      38
+#define SE_GPI_10_INT           37
+#define SE_GPI_09_INT           36
+#define SE_GPI_08_INT           35
+/*34-32 unused*/
+
+/* Start Enable Internal Interrupts - table 57 page 65 */
+
+#define SE_INT_BASE_INT   0
+
+#define SE_TS_IRQ               31
+#define SE_TS_P_INT             30
+#define SE_TS_AUX_INT           29
+/*27-28 unused*/
+#define SE_USB_AHB_NEED_CLK_INT 26
+#define SE_MSTIMER_INT          25
+#define SE_RTC_INT              24
+#define SE_USB_NEED_CLK_INT     23
+#define SE_USB_INT              22
+#define SE_USB_I2C_INT          21
+#define SE_USB_OTG_TIMER_INT    20
+#define SE_USB_OTG_ATX_INT_N    19
+/*18 unused*/
+#define SE_DSP_GPIO4_INT        17
+#define SE_KEY_IRQ              16
+#define SE_DSP_SLAVEPORT_INT    15
+#define SE_DSP_GPIO1_INT        14
+#define SE_DSP_GPIO0_INT        13
+#define SE_DSP_AHB_INT          12
+/*11-6 unused*/
+#define SE_GPIO_05_INT          5
+#define SE_GPIO_04_INT          4
+#define SE_GPIO_03_INT          3
+#define SE_GPIO_02_INT          2
+#define SE_GPIO_01_INT          1
+#define SE_GPIO_00_INT          0
+
+#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
+
+#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
+
+extern int pnx4008_gpio_register_pin(unsigned short pin);
+extern int pnx4008_gpio_unregister_pin(unsigned short pin);
+extern unsigned long pnx4008_gpio_read_pin(unsigned short pin);
+extern int pnx4008_gpio_write_pin(unsigned short pin, int output);
+extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output);
+extern int pnx4008_gpio_read_pin_direction(unsigned short pin);
+extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output);
+extern int pnx4008_gpio_read_pin_mux(unsigned short pin);
+
+static inline void start_int_umask(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) |
+		     START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
+}
+
+static inline void start_int_mask(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) &
+		     ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
+}
+
+static inline void start_int_ack(u8 irq)
+{
+	__raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq));
+}
+
+static inline void start_int_set_falling_edge(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) &
+		     ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
+}
+
+static inline void start_int_set_rising_edge(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) |
+		     START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
+}
+
+#endif				/* _PNX4008_GPIO_H_ */
diff --git a/arch/arm/mach-pnx4008/include/mach/hardware.h b/arch/arm/mach-pnx4008/include/mach/hardware.h
new file mode 100644
index 0000000..7b98b82
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/hardware.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/hardware.h
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/platform.h>
+
+/* Start of virtual addresses for IO devices */
+#define IO_BASE         0xF0000000
+
+/* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 */
+#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
+
+#endif
diff --git a/include/asm-arm/arch-pnx4008/i2c.h b/arch/arm/mach-pnx4008/include/mach/i2c.h
similarity index 100%
rename from include/asm-arm/arch-pnx4008/i2c.h
rename to arch/arm/mach-pnx4008/include/mach/i2c.h
diff --git a/arch/arm/mach-pnx4008/include/mach/io.h b/arch/arm/mach-pnx4008/include/mach/io.h
new file mode 100644
index 0000000..c6206f2
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/io.h
@@ -0,0 +1,21 @@
+
+/*
+ *  arch/arm/mach-pnx4008/include/mach/io.h
+ *
+ * Author: Dmitry Chigirev <chigirev@ru.mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/irq.h b/arch/arm/mach-pnx4008/include/mach/irq.h
new file mode 100644
index 0000000..2a690ca
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/irq.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/irq.h
+ *
+ * PNX4008 IRQ controller driver - header file
+ * this one is used in entry-arnv.S as well so it cannot contain C code
+ *
+ * Copyright (c) 2005 Philips Semiconductors
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#ifndef __PNX4008_IRQ_H__
+#define __PNX4008_IRQ_H__
+
+#define MIC_VA_BASE             IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
+#define SIC1_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
+#define SIC2_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
+
+/* Manual: Chapter 20, page 195 */
+
+#define INTC_BIT(irq) (1<< ((irq) & 0x1F))
+
+#define INTC_ER(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x0 + (((irq)&(0x3<<5))<<9)))
+#define INTC_RSR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x4 + (((irq)&(0x3<<5))<<9)))
+#define INTC_SR(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x8 + (((irq)&(0x3<<5))<<9)))
+#define INTC_APR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0xC + (((irq)&(0x3<<5))<<9)))
+#define INTC_ATR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x10 + (((irq)&(0x3<<5))<<9)))
+#define INTC_ITR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x14 + (((irq)&(0x3<<5))<<9)))
+
+#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
+
+#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
+
+extern void __init pnx4008_init_irq(void);
+
+#endif /* __PNX4008_IRQ_H__ */
diff --git a/arch/arm/mach-pnx4008/include/mach/irqs.h b/arch/arm/mach-pnx4008/include/mach/irqs.h
new file mode 100644
index 0000000..f6b33cf
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/irqs.h
@@ -0,0 +1,215 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/irqs.h
+ *
+ * PNX4008 IRQ controller driver - header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __PNX4008_IRQS_h__
+#define __PNX4008_IRQS_h__
+
+#define NR_IRQS         96
+
+/*Manual: table 259, page 199*/
+
+/*SUB2 Interrupt Routing (SIC2)*/
+
+#define SIC2_BASE_INT   64
+
+#define CLK_SWITCH_ARM_INT 95	/*manual: Clkswitch ARM  */
+#define CLK_SWITCH_DSP_INT 94	/*manual: ClkSwitch DSP  */
+#define CLK_SWITCH_AUD_INT 93	/*manual: Clkswitch AUD  */
+#define GPI_06_INT         92
+#define GPI_05_INT         91
+#define GPI_04_INT         90
+#define GPI_03_INT         89
+#define GPI_02_INT         88
+#define GPI_01_INT         87
+#define GPI_00_INT         86
+#define BT_CLKREQ_INT      85
+#define SPI1_DATIN_INT     84
+#define U5_RX_INT          83
+#define SDIO_INT_N         82
+#define CAM_HS_INT         81
+#define CAM_VS_INT         80
+#define GPI_07_INT         79
+#define DISP_SYNC_INT      78
+#define DSP_INT8           77
+#define U7_HCTS_INT        76
+#define GPI_10_INT         75
+#define GPI_09_INT         74
+#define GPI_08_INT         73
+#define DSP_INT7           72
+#define U2_HCTS_INT        71
+#define SPI2_DATIN_INT     70
+#define GPIO_05_INT        69
+#define GPIO_04_INT        68
+#define GPIO_03_INT        67
+#define GPIO_02_INT        66
+#define GPIO_01_INT        65
+#define GPIO_00_INT        64
+
+/*Manual: table 258, page 198*/
+
+/*SUB1 Interrupt Routing (SIC1)*/
+
+#define SIC1_BASE_INT   32
+
+#define USB_I2C_INT        63
+#define USB_DEV_HP_INT     62
+#define USB_DEV_LP_INT     61
+#define USB_DEV_DMA_INT    60
+#define USB_HOST_INT       59
+#define USB_OTG_ATX_INT_N  58
+#define USB_OTG_TIMER_INT  57
+#define SW_INT             56
+#define SPI1_INT           55
+#define KEY_IRQ            54
+#define DSP_M_INT          53
+#define RTC_INT            52
+#define I2C_1_INT          51
+#define I2C_2_INT          50
+#define PLL1_LOCK_INT      49
+#define PLL2_LOCK_INT      48
+#define PLL3_LOCK_INT      47
+#define PLL4_LOCK_INT      46
+#define PLL5_LOCK_INT      45
+#define SPI2_INT           44
+#define DSP_INT1           43
+#define DSP_INT2           42
+#define DSP_TDM_INT2       41
+#define TS_AUX_INT         40
+#define TS_IRQ             39
+#define TS_P_INT           38
+#define UOUT1_TO_PAD_INT   37
+#define GPI_11_INT         36
+#define DSP_INT4           35
+#define JTAG_COMM_RX_INT   34
+#define JTAG_COMM_TX_INT   33
+#define DSP_INT3           32
+
+/*Manual: table 257, page 197*/
+
+/*MAIN Interrupt Routing*/
+
+#define MAIN_BASE_INT   0
+
+#define SUB2_FIQ_N         31	/*active low */
+#define SUB1_FIQ_N         30	/*active low */
+#define JPEG_INT           29
+#define DMA_INT            28
+#define MSTIMER_INT        27
+#define IIR1_INT           26
+#define IIR2_INT           25
+#define IIR7_INT           24
+#define DSP_TDM_INT0       23
+#define DSP_TDM_INT1       22
+#define DSP_P_INT          21
+#define DSP_INT0           20
+#define DUM_INT            19
+#define UOUT0_TO_PAD_INT   18
+#define MP4_ENC_INT        17
+#define MP4_DEC_INT        16
+#define SD0_INT            15
+#define MBX_INT            14
+#define SD1_INT            13
+#define MS_INT_N           12
+#define FLASH_INT          11 /*NAND*/
+#define IIR6_INT           10
+#define IIR5_INT           9
+#define IIR4_INT           8
+#define IIR3_INT           7
+#define WATCH_INT          6
+#define HSTIMER_INT        5
+#define ARCH_TIMER_IRQ     HSTIMER_INT
+#define CAM_INT            4
+#define PRNG_INT           3
+#define CRYPTO_INT         2
+#define SUB2_IRQ_N         1	/*active low */
+#define SUB1_IRQ_N         0	/*active low */
+
+#define PNX4008_IRQ_TYPES \
+{                                           /*IRQ #'s: */         \
+IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /*  0, 1, 2, 3 */     \
+IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  4, 5, 6, 7 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  8, 9,10,11 */     \
+IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 28,29,30,31 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */  \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 48,49,50,51 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */     \
+}
+
+/* Start Enable Pin Interrupts - table 58 page 66 */
+
+#define SE_PIN_BASE_INT   32
+
+#define SE_U7_RX_INT            63
+#define SE_U7_HCTS_INT          62
+#define SE_BT_CLKREQ_INT        61
+#define SE_U6_IRRX_INT          60
+/*59 unused*/
+#define SE_U5_RX_INT            58
+#define SE_GPI_11_INT           57
+#define SE_U3_RX_INT            56
+#define SE_U2_HCTS_INT          55
+#define SE_U2_RX_INT            54
+#define SE_U1_RX_INT            53
+#define SE_DISP_SYNC_INT        52
+/*51 unused*/
+#define SE_SDIO_INT_N           50
+#define SE_MSDIO_START_INT      49
+#define SE_GPI_06_INT           48
+#define SE_GPI_05_INT           47
+#define SE_GPI_04_INT           46
+#define SE_GPI_03_INT           45
+#define SE_GPI_02_INT           44
+#define SE_GPI_01_INT           43
+#define SE_GPI_00_INT           42
+#define SE_SYSCLKEN_PIN_INT     41
+#define SE_SPI1_DATAIN_INT      40
+#define SE_GPI_07_INT           39
+#define SE_SPI2_DATAIN_INT      38
+#define SE_GPI_10_INT           37
+#define SE_GPI_09_INT           36
+#define SE_GPI_08_INT           35
+/*34-32 unused*/
+
+/* Start Enable Internal Interrupts - table 57 page 65 */
+
+#define SE_INT_BASE_INT   0
+
+#define SE_TS_IRQ               31
+#define SE_TS_P_INT             30
+#define SE_TS_AUX_INT           29
+/*27-28 unused*/
+#define SE_USB_AHB_NEED_CLK_INT 26
+#define SE_MSTIMER_INT          25
+#define SE_RTC_INT              24
+#define SE_USB_NEED_CLK_INT     23
+#define SE_USB_INT              22
+#define SE_USB_I2C_INT          21
+#define SE_USB_OTG_TIMER_INT    20
+
+#endif /* __PNX4008_IRQS_h__ */
diff --git a/arch/arm/mach-pnx4008/include/mach/memory.h b/arch/arm/mach-pnx4008/include/mach/memory.h
new file mode 100644
index 0000000..5789a2d
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/memory.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/memory.h
+ *
+ * Copyright (c) 2005 Philips Semiconductors
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET     (0x80000000)
+
+#define __virt_to_bus(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
+#define __bus_to_virt(x) ((x) + PAGE_OFFSET - PHYS_OFFSET)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/param.h b/arch/arm/mach-pnx4008/include/mach/param.h
new file mode 100644
index 0000000..6ea02f2
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/param.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-pnx4008/include/mach/param.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define HZ 100
diff --git a/arch/arm/mach-pnx4008/include/mach/platform.h b/arch/arm/mach-pnx4008/include/mach/platform.h
new file mode 100644
index 0000000..368c2c1
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/platform.h
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/platform.h
+ *
+ * PNX4008 Base addresses - header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * Based on reference code received from Philips:
+ * Copyright (C) 2003 Philips Semiconductors
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+
+#ifndef __ASM_ARCH_PLATFORM_H__
+#define __ASM_ARCH_PLATFORM_H__
+
+#define PNX4008_IRAM_BASE		0x08000000
+#define PNX4008_IRAM_SIZE		0x00010000
+#define PNX4008_YUV_SLAVE_BASE		0x10000000
+#define PNX4008_DUM_SLAVE_BASE		0x18000000
+#define PNX4008_NDF_FLASH_BASE		0x20020000
+#define PNX4008_SPI1_BASE		0x20088000
+#define PNX4008_SPI2_BASE		0x20090000
+#define PNX4008_SD_CONFIG_BASE		0x20098000
+#define PNX4008_FLASH_DATA		0x200B0000
+#define PNX4008_MLC_FLASH_BASE		0x200B8000
+#define PNX4008_JPEG_CONFIG_BASE	0x300A0000
+#define PNX4008_DMA_CONFIG_BASE		0x31000000
+#define PNX4008_USB_CONFIG_BASE		0x31020000
+#define PNX4008_SDRAM_CFG_BASE		0x31080000
+#define PNX4008_AHB2FAB_BASE		0x40000000
+#define PNX4008_PWRMAN_BASE		0x40004000
+#define PNX4008_INTCTRLMIC_BASE		0x40008000
+#define PNX4008_INTCTRLSIC1_BASE	0x4000C000
+#define PNX4008_INTCTRLSIC2_BASE	0x40010000
+#define PNX4008_HSUART1_BASE		0x40014000
+#define PNX4008_HSUART2_BASE		0x40018000
+#define PNX4008_HSUART7_BASE		0x4001C000
+#define PNX4008_RTC_BASE		0x40024000
+#define PNX4008_PIO_BASE		0x40028000
+#define PNX4008_MSTIMER_BASE		0x40034000
+#define PNX4008_HSTIMER_BASE		0x40038000
+#define PNX4008_WDOG_BASE		0x4003C000
+#define PNX4008_DEBUG_BASE		0x40040000
+#define PNX4008_TOUCH1_BASE		0x40048000
+#define PNX4008_KEYSCAN_BASE		0x40050000
+#define PNX4008_UARTCTRL_BASE		0x40054000
+#define PNX4008_PWM_BASE		0x4005C000
+#define PNX4008_UART3_BASE		0x40080000
+#define PNX4008_UART4_BASE		0x40088000
+#define PNX4008_UART5_BASE		0x40090000
+#define PNX4008_UART6_BASE		0x40098000
+#define PNX4008_I2C1_BASE		0x400A0000
+#define PNX4008_I2C2_BASE		0x400A8000
+#define PNX4008_MAGICGATE_BASE		0x400B0000
+#define PNX4008_DUMCONF_BASE		0x400B8000
+#define PNX4008_DUM_MAINCFG_BASE       	0x400BC000
+#define PNX4008_DSP_BASE		0x400C0000
+#define PNX4008_PROFCOUNTER_BASE	0x400C8000
+#define PNX4008_CRYPTO_BASE		0x400D0000
+#define PNX4008_CAMIFCONF_BASE		0x400D8000
+#define PNX4008_YUV2RGB_BASE		0x400E0000
+#define PNX4008_AUDIOCONFIG_BASE	0x400E8000
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/pm.h b/arch/arm/mach-pnx4008/include/mach/pm.h
new file mode 100644
index 0000000..2fa685b
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/pm.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/pm.h
+ *
+ * PNX4008 Power Management Routiness - header file
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARCH_PNX4008_PM_H
+#define __ASM_ARCH_PNX4008_PM_H
+
+#ifndef __ASSEMBLER__
+#include "irq.h"
+#include "irqs.h"
+#include "clock.h"
+
+extern void pnx4008_pm_idle(void);
+extern void pnx4008_pm_suspend(void);
+extern unsigned int pnx4008_cpu_suspend_sz;
+extern void pnx4008_cpu_suspend(void);
+extern unsigned int pnx4008_cpu_standby_sz;
+extern void pnx4008_cpu_standby(void);
+
+extern int pnx4008_startup_pll(struct clk *);
+extern int pnx4008_shutdown_pll(struct clk *);
+
+#endif				/* ASSEMBLER */
+#endif				/* __ASM_ARCH_PNX4008_PM_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h
new file mode 100644
index 0000000..8985a4622
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/system.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/system.h
+ *
+ * Copyright (C) 2003 Philips Semiconductors
+ * Copyright (C) 2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <mach/platform.h>
+
+static void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/timex.h b/arch/arm/mach-pnx4008/include/mach/timex.h
new file mode 100644
index 0000000..956fbd8e
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/timex.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/timex.h
+ *
+ * PNX4008 timers header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __PNX4008_TIMEX_H
+#define __PNX4008_TIMEX_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#define CLOCK_TICK_RATE		1000000
+
+#define TICKS2USECS(x)	(x)
+
+/* MilliSecond Timer - Chapter 21 Page 202 */
+
+#define MSTIM_INT     IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0))
+#define MSTIM_CTRL    IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4))
+#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8))
+#define MSTIM_MCTRL   IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14))
+#define MSTIM_MATCH0  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18))
+#define MSTIM_MATCH1  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c))
+
+/* High Speed Timer - Chpater 22, Page 205 */
+
+#define HSTIM_INT     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0))
+#define HSTIM_CTRL    IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4))
+#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8))
+#define HSTIM_PMATCH  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC))
+#define HSTIM_PCOUNT  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10))
+#define HSTIM_MCTRL   IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14))
+#define HSTIM_MATCH0  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18))
+#define HSTIM_MATCH1  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c))
+#define HSTIM_MATCH2  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20))
+#define HSTIM_CCR     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28))
+#define HSTIM_CR0     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C))
+#define HSTIM_CR1     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30))
+
+/* IMPORTANT: both timers are UPCOUNTING */
+
+/* xSTIM_MCTRL bit definitions */
+#define MR0_INT        1
+#define RESET_COUNT0   (1<<1)
+#define STOP_COUNT0    (1<<2)
+#define MR1_INT        (1<<3)
+#define RESET_COUNT1   (1<<4)
+#define STOP_COUNT1    (1<<5)
+#define MR2_INT        (1<<6)
+#define RESET_COUNT2   (1<<7)
+#define STOP_COUNT2    (1<<8)
+
+/* xSTIM_CTRL bit definitions */
+#define COUNT_ENAB     1
+#define RESET_COUNT    (1<<1)
+#define DEBUG_EN       (1<<2)
+
+/* xSTIM_INT bit definitions */
+#define MATCH0_INT     1
+#define MATCH1_INT     (1<<1)
+#define MATCH2_INT     (1<<2)
+#define RTC_TICK0      (1<<4)
+#define RTC_TICK1      (1<<5)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/uncompress.h b/arch/arm/mach-pnx4008/include/mach/uncompress.h
new file mode 100644
index 0000000..bb4751e
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/uncompress.h
@@ -0,0 +1,46 @@
+/*
+ *  arch/arm/mach-pnx4008/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2006 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define UART5_BASE 0x40090000
+
+#define UART5_DR    (*(volatile unsigned char *) (UART5_BASE))
+#define UART5_FR    (*(volatile unsigned char *) (UART5_BASE + 18))
+
+static __inline__ void putc(char c)
+{
+	while (UART5_FR & (1 << 5))
+		barrier();
+
+	UART5_DR = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-pnx4008/include/mach/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
new file mode 100644
index 0000000..2ad3983
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/vmalloc.h
+ *
+ * Author: Vitaly Wool <source@mvista.com>
+ *
+ * 2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c
index 7eba292..5c4f55a 100644
--- a/arch/arm/mach-pnx4008/irq.c
+++ b/arch/arm/mach-pnx4008/irq.c
@@ -23,7 +23,7 @@
 #include <linux/ioport.h>
 #include <linux/device.h>
 #include <linux/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 #include <asm/pgtable.h>
@@ -32,7 +32,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
-#include <asm/arch/irq.h>
+#include <mach/irq.h>
 
 static u8 pnx4008_irq_type[NR_IRQS] = PNX4008_IRQ_TYPES;
 
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
index 52c51f9..f970906d 100644
--- a/arch/arm/mach-pnx4008/pm.c
+++ b/arch/arm/mach-pnx4008/pm.c
@@ -21,8 +21,8 @@
 
 #include <asm/io.h>
 #include <asm/cacheflush.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/clock.h>
+#include <mach/pm.h>
+#include <mach/clock.h>
 
 #define SRAM_VA IO_ADDRESS(PNX4008_IRAM_BASE)
 
diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c
index a95bd19..9be84bb 100644
--- a/arch/arm/mach-pnx4008/serial.c
+++ b/arch/arm/mach-pnx4008/serial.c
@@ -15,14 +15,14 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/platform.h>
-#include <asm/arch/hardware.h>
+#include <mach/platform.h>
+#include <mach/hardware.h>
 
 #include <linux/serial_core.h>
 #include <linux/serial_reg.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 #define UART_3		0
 #define UART_4		1
diff --git a/arch/arm/mach-pnx4008/sleep.S b/arch/arm/mach-pnx4008/sleep.S
index fe6bdcd..f4eed49 100644
--- a/arch/arm/mach-pnx4008/sleep.S
+++ b/arch/arm/mach-pnx4008/sleep.S
@@ -13,7 +13,7 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE)
 #define PWR_CTRL_REG_OFFS 0x44
diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c
index 616cb3e..1809752 100644
--- a/arch/arm/mach-pnx4008/time.c
+++ b/arch/arm/mach-pnx4008/time.c
@@ -24,7 +24,7 @@
 #include <linux/irq.h>
 
 #include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c
index 254892a..5c67b18 100644
--- a/arch/arm/mach-pxa/akita-ioexp.c
+++ b/arch/arm/mach-pxa/akita-ioexp.c
@@ -19,7 +19,7 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
-#include <asm/arch/akita.h>
+#include <mach/akita.h>
 
 /* MAX7310 Regiser Map */
 #define MAX7310_INPUT    0x00
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index d858f98..c01eea8 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -12,9 +12,9 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/hardware.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c
index 31f5bd4..2d5bcea 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x270-pci.c
@@ -22,7 +22,7 @@
 #include <linux/gpio.h>
 
 #include <asm/mach/pci.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 #include <asm/mach-types.h>
 
 #include <asm/hardware/it8152.h>
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 402e807..af003a2 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -23,14 +23,14 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/bitfield.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/mmc.h>
+#include <mach/bitfield.h>
 
 #include <asm/hardware/it8152.h>
 
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index c0c81b7..abce13c 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -21,16 +21,16 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/colibri.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/colibri.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 8c43e27..123a950 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -26,7 +26,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/system.h>
@@ -35,14 +35,14 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/irda.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/corgi.h>
+#include <mach/sharpsl.h>
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
index b08290b..311baf1 100644
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -20,12 +20,12 @@
 #include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/string.h>
-#include <asm/arch/akita.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/spitz.h>
+#include <mach/akita.h>
+#include <mach/corgi.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/sharpsl.h>
+#include <mach/spitz.h>
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index abd8b13..35bbfcc 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -20,14 +20,14 @@
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/scoop.h>
 
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
+#include <mach/corgi.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
 #include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index 21e616f..8e2f221 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -16,13 +16,13 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/regs-ssp.h>
+#include <mach/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/regs-ssp.h>
 #include "sharpsl.h"
 
 static DEFINE_SPINLOCK(corgi_ssp_lock);
diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c
index 8f6075a..6f5569b 100644
--- a/arch/arm/mach-pxa/cpu-pxa.c
+++ b/arch/arm/mach-pxa/cpu-pxa.c
@@ -37,9 +37,9 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 #ifdef DEBUG
 static unsigned int freq_debug;
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 84489dc..35736fc 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,19 +4,19 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/pxa2xx_spi.h>
-#include <asm/arch/camera.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxa3xx_nand.h>
+#include <mach/gpio.h>
+#include <mach/udc.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/i2c.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/camera.h>
+#include <mach/audio.h>
+#include <mach/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c
index 2532b6d..c0be17e 100644
--- a/arch/arm/mach-pxa/dma.c
+++ b/arch/arm/mach-pxa/dma.c
@@ -20,10 +20,10 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 struct dma_channel {
 	char *name;
diff --git a/arch/arm/mach-pxa/e400_lcd.c b/arch/arm/mach-pxa/e400_lcd.c
index 16c0236..2638841 100644
--- a/arch/arm/mach-pxa/e400_lcd.c
+++ b/arch/arm/mach-pxa/e400_lcd.c
@@ -14,8 +14,8 @@
 #include <linux/module.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxafb.h>
 
 static struct pxafb_mode_info e400_pxafb_mode_info = {
 	.pixclock       = 140703,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index e5cc6ca..7a0a681 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -23,14 +23,14 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa27x-udc.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/pxa27x_keypad.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/mmc.h>
+#include <mach/pxa27x_keypad.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index c29b7b2..0394245 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -14,7 +14,7 @@
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/eseries_udc.c b/arch/arm/mach-pxa/eseries_udc.c
index 362847a..d622c04 100644
--- a/arch/arm/mach-pxa/eseries_udc.c
+++ b/arch/arm/mach-pxa/eseries_udc.c
@@ -14,10 +14,10 @@
 #include <linux/init.h>
 #include <linux/device.h>
 
-#include <asm/arch/udc.h>
-#include <asm/arch/eseries-gpio.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/udc.h>
+#include <mach/eseries-gpio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 0143eed..cc3d850 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -18,13 +18,13 @@
 #include <linux/pwm_backlight.h>
 
 #include <asm/setup.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/i2c.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/i2c.h>
 
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 2106028..2834b7f 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -20,12 +20,12 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index 1f34f23..07acc1b2 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -18,10 +18,10 @@
 #include <linux/sysdev.h>
 
 #include <asm/gpio.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 2bc06363..c009247 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -26,7 +26,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -34,13 +34,13 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/gumstix.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/gumstix.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index a994292..5aa0270 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -25,18 +25,18 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/idp.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/bitfield.h>
-#include <asm/arch/mmc.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/idp.h>
+#include <mach/pxafb.h>
+#include <mach/bitfield.h>
+#include <mach/mmc.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/include/asm-arm/arch-pxa/akita.h b/arch/arm/mach-pxa/include/mach/akita.h
similarity index 100%
rename from include/asm-arm/arch-pxa/akita.h
rename to arch/arm/mach-pxa/include/mach/akita.h
diff --git a/include/asm-arm/arch-pxa/audio.h b/arch/arm/mach-pxa/include/mach/audio.h
similarity index 100%
rename from include/asm-arm/arch-pxa/audio.h
rename to arch/arm/mach-pxa/include/mach/audio.h
diff --git a/include/asm-arm/arch-pxa/bitfield.h b/arch/arm/mach-pxa/include/mach/bitfield.h
similarity index 100%
rename from include/asm-arm/arch-pxa/bitfield.h
rename to arch/arm/mach-pxa/include/mach/bitfield.h
diff --git a/include/asm-arm/arch-pxa/camera.h b/arch/arm/mach-pxa/include/mach/camera.h
similarity index 100%
rename from include/asm-arm/arch-pxa/camera.h
rename to arch/arm/mach-pxa/include/mach/camera.h
diff --git a/include/asm-arm/arch-pxa/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
similarity index 100%
rename from include/asm-arm/arch-pxa/colibri.h
rename to arch/arm/mach-pxa/include/mach/colibri.h
diff --git a/include/asm-arm/arch-pxa/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
similarity index 100%
rename from include/asm-arm/arch-pxa/corgi.h
rename to arch/arm/mach-pxa/include/mach/corgi.h
diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
new file mode 100644
index 0000000..55d6a17
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -0,0 +1,25 @@
+/* arch/arm/mach-pxa/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include "hardware.h"
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x40000000		@ physical
+		movne	\rx, #io_p2v(0x40000000)	@ virtual
+		orr	\rx, \rx, #0x00100000
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
new file mode 100644
index 0000000..955bfe6
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -0,0 +1,50 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/dma.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * Descriptor structure for PXA's DMA engine
+ * Note: this structure must always be aligned to a 16-byte boundary.
+ */
+
+typedef struct pxa_dma_desc {
+	volatile u32 ddadr;	/* Points to the next descriptor + flags */
+	volatile u32 dsadr;	/* DSADR value for the current transfer */
+	volatile u32 dtadr;	/* DTADR value for the current transfer */
+	volatile u32 dcmd;	/* DCMD value for the current transfer */
+} pxa_dma_desc;
+
+typedef enum {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 1,
+	DMA_PRIO_LOW = 2
+} pxa_dma_prio;
+
+#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+#define HAVE_ARCH_PCI_SET_DMA_MASK	1
+#endif
+
+/*
+ * DMA registration
+ */
+
+int __init pxa_init_dma(int num_ch);
+
+int pxa_request_dma (char *name,
+			 pxa_dma_prio prio,
+			 void (*irq_handler)(int, void *),
+			 void *data);
+
+void pxa_free_dma (int dma_ch);
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
new file mode 100644
index 0000000..de16c12d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-pxa/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for PXA-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mrc	p15, 0, \tmp, c0, c0, 0		@ CPUID
+		mov	\tmp, \tmp, lsr #13
+		and	\tmp, \tmp, #0x7		@ Core G
+		cmp	\tmp, #1
+		bhi	1004f
+
+		mov	\base, #io_p2v(0x40000000)	@ IIR Ctl = 0x40d00000
+		add	\base, \base, #0x00d00000
+		ldr	\irqstat, [\base, #0]		@ ICIP
+		ldr	\irqnr, [\base, #4]		@ ICMR
+		b	1002f
+
+1004:
+		mrc	p6, 0, \irqstat, c6, c0, 0	@ ICIP2
+		mrc	p6, 0, \irqnr, c7, c0, 0	@ ICMR2
+		ands	\irqnr, \irqstat, \irqnr
+		beq	1003f
+		rsb	\irqstat, \irqnr, #0
+		and	\irqstat, \irqstat, \irqnr
+		clz	\irqnr, \irqstat
+		rsb	\irqnr, \irqnr, #31
+		add	\irqnr, \irqnr, #32
+		b	1001f
+1003:
+		mrc	p6, 0, \irqstat, c0, c0, 0	@ ICIP
+		mrc	p6, 0, \irqnr, c1, c0, 0	@ ICMR
+1002:
+		ands	\irqnr, \irqstat, \irqnr
+		beq	1001f
+		rsb	\irqstat, \irqnr, #0
+		and	\irqstat, \irqstat, \irqnr
+		clz	\irqnr, \irqstat
+		rsb	\irqnr, \irqnr, #31
+1001:
+		.endm
diff --git a/include/asm-arm/arch-pxa/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
similarity index 100%
rename from include/asm-arm/arch-pxa/eseries-gpio.h
rename to arch/arm/mach-pxa/include/mach/eseries-gpio.h
diff --git a/include/asm-arm/arch-pxa/eseries-irq.h b/arch/arm/mach-pxa/include/mach/eseries-irq.h
similarity index 100%
rename from include/asm-arm/arch-pxa/eseries-irq.h
rename to arch/arm/mach-pxa/include/mach/eseries-irq.h
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
new file mode 100644
index 0000000..2c538d8
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -0,0 +1,65 @@
+/*
+ * arch/arm/mach-pxa/include/mach/gpio.h
+ *
+ * PXA GPIO wrappers for arch-neutral GPIO calls
+ *
+ * Written by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_PXA_GPIO_H
+#define __ASM_ARCH_PXA_GPIO_H
+
+#include <mach/pxa-regs.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+
+#include <asm-generic/gpio.h>
+
+
+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
+ * Those cases currently cause holes in the GPIO number space.
+ */
+#define NR_BUILTIN_GPIO 128
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
+		return GPLR(gpio) & GPIO_bit(gpio);
+	else
+		return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
+		if (value)
+			GPSR(gpio) = GPIO_bit(gpio);
+		else
+			GPCR(gpio) = GPIO_bit(gpio);
+	} else {
+		__gpio_set_value(gpio, value);
+	}
+}
+
+#define gpio_cansleep __gpio_cansleep
+
+#define gpio_to_irq(gpio)	IRQ_GPIO(gpio)
+#define irq_to_gpio(irq)	IRQ_TO_GPIO(irq)
+
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
new file mode 100644
index 0000000..42ee195
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -0,0 +1,96 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/gumstix.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+/* BTRESET - Reset line to Bluetooth module, active low signal. */
+#define GPIO_GUMSTIX_BTRESET          7
+#define GPIO_GUMSTIX_BTRESET_MD		(GPIO_GUMSTIX_BTRESET | GPIO_OUT)
+
+
+/*
+GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean
+interrupt signal for determining cable presence. On the original gumstix,
+this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F,
+this moves to GPIO17 and GPIO37. */
+
+/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
+has detected a cable insertion; driven low otherwise. */
+
+#ifdef CONFIG_ARCH_GUMSTIX_ORIG
+
+#define GPIO_GUMSTIX_USB_GPIOn		81
+#define GPIO_GUMSTIX_USB_GPIOx		83
+
+#else
+
+#define GPIO_GUMSTIX_USB_GPIOn		35
+#define GPIO_GUMSTIX_USB_GPIOx		41
+
+#endif
+
+/* usb state change */
+#define GUMSTIX_USB_INTR_IRQ		IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
+
+#define GPIO_GUMSTIX_USB_GPIOn_MD	(GPIO_GUMSTIX_USB_GPIOn | GPIO_IN)
+#define GPIO_GUMSTIX_USB_GPIOx_CON_MD	(GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT)
+#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD	(GPIO_GUMSTIX_USB_GPIOx | GPIO_IN)
+
+/*
+ * SD/MMC definitions
+ */
+#define GUMSTIX_GPIO_nSD_WP		22 /* SD Write Protect */
+#define GUMSTIX_GPIO_nSD_DETECT		11 /* MMC/SD Card Detect */
+#define GUMSTIX_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT)
+
+/*
+ * SMC Ethernet definitions
+ * ETH_RST provides a hardware reset line to the ethernet chip
+ * ETH is the IRQ line in from the ethernet chip to the PXA
+ */
+#define GPIO_GUMSTIX_ETH0_RST		80
+#define GPIO_GUMSTIX_ETH0_RST_MD	(GPIO_GUMSTIX_ETH0_RST | GPIO_OUT)
+#define GPIO_GUMSTIX_ETH1_RST		52
+#define GPIO_GUMSTIX_ETH1_RST_MD	(GPIO_GUMSTIX_ETH1_RST | GPIO_OUT)
+
+#define GPIO_GUMSTIX_ETH0		36
+#define GPIO_GUMSTIX_ETH0_MD		(GPIO_GUMSTIX_ETH0 | GPIO_IN)
+#define GUMSTIX_ETH0_IRQ		IRQ_GPIO(GPIO_GUMSTIX_ETH0)
+#define GPIO_GUMSTIX_ETH1		27
+#define GPIO_GUMSTIX_ETH1_MD		(GPIO_GUMSTIX_ETH1 | GPIO_IN)
+#define GUMSTIX_ETH1_IRQ		IRQ_GPIO(GPIO_GUMSTIX_ETH1)
+
+
+/* CF reset line */
+#define GPIO8_RESET			8
+
+/* CF slot 0 */
+#define GPIO4_nBVD1			4
+#define GPIO4_nSTSCHG			GPIO4_nBVD1
+#define GPIO11_nCD			11
+#define GPIO26_PRDY_nBSY		26
+#define GUMSTIX_S0_nSTSCHG_IRQ		IRQ_GPIO(GPIO4_nSTSCHG)
+#define GUMSTIX_S0_nCD_IRQ		IRQ_GPIO(GPIO11_nCD)
+#define GUMSTIX_S0_PRDY_nBSY_IRQ	IRQ_GPIO(GPIO26_PRDY_nBSY)
+
+/* CF slot 1 */
+#define GPIO18_nBVD1			18
+#define GPIO18_nSTSCHG			GPIO18_nBVD1
+#define GPIO36_nCD			36
+#define GPIO27_PRDY_nBSY		27
+#define GUMSTIX_S1_nSTSCHG_IRQ		IRQ_GPIO(GPIO18_nSTSCHG)
+#define GUMSTIX_S1_nCD_IRQ		IRQ_GPIO(GPIO36_nCD)
+#define GUMSTIX_S1_PRDY_nBSY_IRQ	IRQ_GPIO(GPIO27_PRDY_nBSY)
+
+/* CF GPIO line modes */
+#define GPIO4_nSTSCHG_MD		(GPIO4_nSTSCHG | GPIO_IN)
+#define GPIO8_RESET_MD			(GPIO8_RESET | GPIO_OUT)
+#define GPIO11_nCD_MD			(GPIO11_nCD | GPIO_IN)
+#define GPIO18_nSTSCHG_MD		(GPIO18_nSTSCHG | GPIO_IN)
+#define GPIO26_PRDY_nBSY_MD		(GPIO26_PRDY_nBSY | GPIO_IN)
+#define GPIO27_PRDY_nBSY_MD		(GPIO27_PRDY_nBSY | GPIO_IN)
+#define GPIO36_nCD_MD			(GPIO36_nCD | GPIO_IN)
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
new file mode 100644
index 0000000..f8fb1e7
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -0,0 +1,240 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/hardware.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * We requires absolute addresses.
+ */
+#define PCIO_BASE		0
+
+/*
+ * Workarounds for at least 2 errata so far require this.
+ * The mapping is set in mach-pxa/generic.c.
+ */
+#define UNCACHED_PHYS_0		0xff000000
+#define UNCACHED_ADDR		UNCACHED_PHYS_0
+
+/*
+ * Intel PXA2xx internal register mapping:
+ *
+ * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
+ * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
+ * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
+ * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
+ * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
+ * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
+ * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
+ *
+ * Note that not all PXA2xx chips implement all those addresses, and the
+ * kernel only maps the minimum needed range of this mapping.
+ */
+#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
+#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
+
+#ifndef __ASSEMBLY__
+
+# define __REG(x)	(*((volatile u32 *)io_p2v(x)))
+
+/* With indexed regs we don't want to feed the index through io_p2v()
+   especially if it is a variable, otherwise horrible code will result. */
+# define __REG2(x,y)	\
+	(*(volatile u32 *)((u32)&__REG(x) + (y)))
+
+# define __PREG(x)	(io_v2p((u32)&(x)))
+
+#else
+
+# define __REG(x)	io_p2v(x)
+# define __PREG(x)	io_v2p(x)
+
+#endif
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_PXA25x
+#define __cpu_is_pxa21x(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xf3f;	\
+		_id == 0x212;				\
+	})
+
+#define __cpu_is_pxa255(id)                             \
+	({                                              \
+		unsigned int _id = (id) >> 4 & 0xfff;   \
+		_id == 0x2d0;                           \
+	 })
+
+#define __cpu_is_pxa25x(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x2d0 || _id == 0x290;		\
+	})
+#else
+#define __cpu_is_pxa21x(id)	(0)
+#define __cpu_is_pxa255(id)	(0)
+#define __cpu_is_pxa25x(id)	(0)
+#endif
+
+#ifdef CONFIG_PXA27x
+#define __cpu_is_pxa27x(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x411;				\
+	})
+#else
+#define __cpu_is_pxa27x(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA300
+#define __cpu_is_pxa300(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x688;				\
+	 })
+#else
+#define __cpu_is_pxa300(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA310
+#define __cpu_is_pxa310(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x689;				\
+	 })
+#else
+#define __cpu_is_pxa310(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA320
+#define __cpu_is_pxa320(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x603 || _id == 0x682;		\
+	 })
+#else
+#define __cpu_is_pxa320(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA930
+#define __cpu_is_pxa930(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x683;		\
+	 })
+#else
+#define __cpu_is_pxa930(id)	(0)
+#endif
+
+#define cpu_is_pxa21x()					\
+	({						\
+		__cpu_is_pxa21x(read_cpuid_id());	\
+	})
+
+#define cpu_is_pxa255()                                 \
+	({                                              \
+		__cpu_is_pxa255(read_cpuid_id());       \
+	})
+
+#define cpu_is_pxa25x()					\
+	({						\
+		__cpu_is_pxa25x(read_cpuid_id());	\
+	})
+
+#define cpu_is_pxa27x()					\
+	({						\
+		__cpu_is_pxa27x(read_cpuid_id());	\
+	})
+
+#define cpu_is_pxa300()					\
+	({						\
+		__cpu_is_pxa300(read_cpuid_id());	\
+	 })
+
+#define cpu_is_pxa310()					\
+	({						\
+		__cpu_is_pxa310(read_cpuid_id());	\
+	 })
+
+#define cpu_is_pxa320()					\
+	({						\
+		__cpu_is_pxa320(read_cpuid_id());	\
+	 })
+
+#define cpu_is_pxa930()					\
+	({						\
+		unsigned int id = read_cpuid(CPUID_ID);	\
+		__cpu_is_pxa930(id);			\
+	 })
+
+/*
+ * CPUID Core Generation Bit
+ * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
+ * == 0x3 for pxa300/pxa310/pxa320
+ */
+#define __cpu_is_pxa2xx(id)				\
+	({						\
+		unsigned int _id = (id) >> 13 & 0x7;	\
+		_id <= 0x2;				\
+	 })
+
+#define __cpu_is_pxa3xx(id)				\
+	({						\
+		unsigned int _id = (id) >> 13 & 0x7;	\
+		_id == 0x3;				\
+	 })
+
+#define cpu_is_pxa2xx()					\
+	({						\
+		__cpu_is_pxa2xx(read_cpuid_id());	\
+	 })
+
+#define cpu_is_pxa3xx()					\
+	({						\
+		__cpu_is_pxa3xx(read_cpuid_id());	\
+	 })
+
+/*
+ * Handy routine to set GPIO alternate functions
+ */
+extern int pxa_gpio_mode( int gpio_mode );
+
+/*
+ * Return GPIO level, nonzero means high, zero is low
+ */
+extern int pxa_gpio_get_value(unsigned gpio);
+
+/*
+ * Set output GPIO level
+ */
+extern void pxa_gpio_set_value(unsigned gpio, int value);
+
+/*
+ * return current memory and LCD clock frequency in units of 10kHz
+ */
+extern unsigned int get_memclk_frequency_10khz(void);
+
+/*
+ * register GPIO as reset generator
+ */
+extern int init_gpio_reset(int gpio);
+
+#endif
+
+#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+#define PCIBIOS_MIN_IO		0
+#define PCIBIOS_MIN_MEM		0
+#define pcibios_assign_all_busses()	1
+#endif
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-pxa/i2c.h b/arch/arm/mach-pxa/include/mach/i2c.h
similarity index 100%
rename from include/asm-arm/arch-pxa/i2c.h
rename to arch/arm/mach-pxa/include/mach/i2c.h
diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/include/mach/idp.h
new file mode 100644
index 0000000..5eff96f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/idp.h
@@ -0,0 +1,199 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/idp.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
+ *
+ * 2001-09-13: Cliff Brake <cbrake@accelent.com>
+ *             Initial code
+ *
+ * 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
+ *             <http://www.vibren.com> <http://bec-systems.com>
+ *             Changes for 2.6 kernel.
+ */
+
+
+/*
+ * Note: this file must be safe to include in assembly files
+ *
+ * Support for the Vibren PXA255 IDP requires rev04 or later
+ * IDP hardware.
+ */
+
+
+#define IDP_FLASH_PHYS		(PXA_CS0_PHYS)
+#define IDP_ALT_FLASH_PHYS	(PXA_CS1_PHYS)
+#define IDP_MEDIAQ_PHYS		(PXA_CS3_PHYS)
+#define IDP_IDE_PHYS		(PXA_CS5_PHYS + 0x03000000)
+#define IDP_ETH_PHYS		(PXA_CS5_PHYS + 0x03400000)
+#define IDP_COREVOLT_PHYS	(PXA_CS5_PHYS + 0x03800000)
+#define IDP_CPLD_PHYS		(PXA_CS5_PHYS + 0x03C00000)
+
+
+/*
+ * virtual memory map
+ */
+
+#define IDP_COREVOLT_VIRT	(0xf0000000)
+#define IDP_COREVOLT_SIZE	(1*1024*1024)
+
+#define IDP_CPLD_VIRT		(IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE)
+#define IDP_CPLD_SIZE		(1*1024*1024)
+
+#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000
+#error Your custom IO space is getting a bit large !!
+#endif
+
+#define CPLD_P2V(x)		((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT)
+#define CPLD_V2P(x)		((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS)
+
+#ifndef __ASSEMBLY__
+#  define __CPLD_REG(x)		(*((volatile unsigned long *)CPLD_P2V(x)))
+#else
+#  define __CPLD_REG(x)		CPLD_P2V(x)
+#endif
+
+/* board level registers in the CPLD: (offsets from CPLD_VIRT) */
+
+#define _IDP_CPLD_REV			(IDP_CPLD_PHYS + 0x00)
+#define _IDP_CPLD_PERIPH_PWR		(IDP_CPLD_PHYS + 0x04)
+#define _IDP_CPLD_LED_CONTROL		(IDP_CPLD_PHYS + 0x08)
+#define _IDP_CPLD_KB_COL_HIGH		(IDP_CPLD_PHYS + 0x0C)
+#define _IDP_CPLD_KB_COL_LOW		(IDP_CPLD_PHYS + 0x10)
+#define _IDP_CPLD_PCCARD_EN		(IDP_CPLD_PHYS + 0x14)
+#define _IDP_CPLD_GPIOH_DIR		(IDP_CPLD_PHYS + 0x18)
+#define _IDP_CPLD_GPIOH_VALUE		(IDP_CPLD_PHYS + 0x1C)
+#define _IDP_CPLD_GPIOL_DIR		(IDP_CPLD_PHYS + 0x20)
+#define _IDP_CPLD_GPIOL_VALUE		(IDP_CPLD_PHYS + 0x24)
+#define _IDP_CPLD_PCCARD_PWR		(IDP_CPLD_PHYS + 0x28)
+#define _IDP_CPLD_MISC_CTRL		(IDP_CPLD_PHYS + 0x2C)
+#define _IDP_CPLD_LCD			(IDP_CPLD_PHYS + 0x30)
+#define _IDP_CPLD_FLASH_WE		(IDP_CPLD_PHYS + 0x34)
+
+#define _IDP_CPLD_KB_ROW		(IDP_CPLD_PHYS + 0x50)
+#define _IDP_CPLD_PCCARD0_STATUS	(IDP_CPLD_PHYS + 0x54)
+#define _IDP_CPLD_PCCARD1_STATUS	(IDP_CPLD_PHYS + 0x58)
+#define _IDP_CPLD_MISC_STATUS		(IDP_CPLD_PHYS + 0x5C)
+
+/* FPGA register virtual addresses */
+
+#define IDP_CPLD_REV			__CPLD_REG(_IDP_CPLD_REV)
+#define IDP_CPLD_PERIPH_PWR		__CPLD_REG(_IDP_CPLD_PERIPH_PWR)
+#define IDP_CPLD_LED_CONTROL		__CPLD_REG(_IDP_CPLD_LED_CONTROL)
+#define IDP_CPLD_KB_COL_HIGH		__CPLD_REG(_IDP_CPLD_KB_COL_HIGH)
+#define IDP_CPLD_KB_COL_LOW		__CPLD_REG(_IDP_CPLD_KB_COL_LOW)
+#define IDP_CPLD_PCCARD_EN		__CPLD_REG(_IDP_CPLD_PCCARD_EN)
+#define IDP_CPLD_GPIOH_DIR		__CPLD_REG(_IDP_CPLD_GPIOH_DIR)
+#define IDP_CPLD_GPIOH_VALUE		__CPLD_REG(_IDP_CPLD_GPIOH_VALUE)
+#define IDP_CPLD_GPIOL_DIR		__CPLD_REG(_IDP_CPLD_GPIOL_DIR)
+#define IDP_CPLD_GPIOL_VALUE		__CPLD_REG(_IDP_CPLD_GPIOL_VALUE)
+#define IDP_CPLD_PCCARD_PWR		__CPLD_REG(_IDP_CPLD_PCCARD_PWR)
+#define IDP_CPLD_MISC_CTRL		__CPLD_REG(_IDP_CPLD_MISC_CTRL)
+#define IDP_CPLD_LCD			__CPLD_REG(_IDP_CPLD_LCD)
+#define IDP_CPLD_FLASH_WE		__CPLD_REG(_IDP_CPLD_FLASH_WE)
+
+#define IDP_CPLD_KB_ROW		        __CPLD_REG(_IDP_CPLD_KB_ROW)
+#define IDP_CPLD_PCCARD0_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS)
+#define IDP_CPLD_PCCARD1_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS)
+#define IDP_CPLD_MISC_STATUS		__CPLD_REG(_IDP_CPLD_MISC_STATUS)
+
+
+/*
+ * Bit masks for various registers
+ */
+
+// IDP_CPLD_PCCARD_PWR
+#define PCC0_PWR0	(1 << 0)
+#define PCC0_PWR1	(1 << 1)
+#define PCC0_PWR2	(1 << 2)
+#define PCC0_PWR3	(1 << 3)
+#define PCC1_PWR0	(1 << 4)
+#define PCC1_PWR1	(1 << 5)
+#define PCC1_PWR2	(1 << 6)
+#define PCC1_PWR3	(1 << 7)
+
+// IDP_CPLD_PCCARD_EN
+#define PCC0_RESET	(1 << 6)
+#define PCC1_RESET	(1 << 7)
+#define PCC0_ENABLE	(1 << 0)
+#define PCC1_ENABLE	(1 << 1)
+
+// IDP_CPLD_PCCARDx_STATUS
+#define _PCC_WRPROT	(1 << 7) // 7-4 read as low true
+#define _PCC_RESET	(1 << 6)
+#define _PCC_IRQ	(1 << 5)
+#define _PCC_INPACK	(1 << 4)
+#define PCC_BVD2	(1 << 3)
+#define PCC_BVD1	(1 << 2)
+#define PCC_VS2		(1 << 1)
+#define PCC_VS1		(1 << 0)
+
+#define PCC_DETECT(x)	(GPLR(7 + (x)) & GPIO_bit(7 + (x)))
+
+/* A listing of interrupts used by external hardware devices */
+
+#define TOUCH_PANEL_IRQ			IRQ_GPIO(5)
+#define IDE_IRQ				IRQ_GPIO(21)
+
+#define TOUCH_PANEL_IRQ_EDGE		IRQ_TYPE_EDGE_FALLING
+
+#define ETHERNET_IRQ			IRQ_GPIO(4)
+#define ETHERNET_IRQ_EDGE		IRQ_TYPE_EDGE_RISING
+
+#define IDE_IRQ_EDGE			IRQ_TYPE_EDGE_RISING
+
+#define PCMCIA_S0_CD_VALID		IRQ_GPIO(7)
+#define PCMCIA_S0_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
+
+#define PCMCIA_S1_CD_VALID		IRQ_GPIO(8)
+#define PCMCIA_S1_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
+
+#define PCMCIA_S0_RDYINT		IRQ_GPIO(19)
+#define PCMCIA_S1_RDYINT		IRQ_GPIO(22)
+
+
+/*
+ * Macros for LED Driver
+ */
+
+/* leds 0 = ON */
+#define IDP_HB_LED	(1<<5)
+#define IDP_BUSY_LED	(1<<6)
+
+#define IDP_LEDS_MASK	(IDP_HB_LED | IDP_BUSY_LED)
+
+/*
+ * macros for MTD driver
+ */
+
+#define FLASH_WRITE_PROTECT_DISABLE()	((IDP_CPLD_FLASH_WE) &= ~(0x1))
+#define FLASH_WRITE_PROTECT_ENABLE()	((IDP_CPLD_FLASH_WE) |= (0x1))
+
+/*
+ * macros for matrix keyboard driver
+ */
+
+#define KEYBD_MATRIX_NUMBER_INPUTS	7
+#define KEYBD_MATRIX_NUMBER_OUTPUTS	14
+
+#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC	FALSE
+#define KEYBD_MATRIX_INVERT_INPUT_LOGIC		FALSE
+
+#define KEYBD_MATRIX_SETTLING_TIME_US			100
+#define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT		2
+
+#define KEYBD_MATRIX_SET_OUTPUTS(outputs) \
+{\
+	IDP_CPLD_KB_COL_LOW = outputs;\
+	IDP_CPLD_KB_COL_HIGH = outputs >> 7;\
+}
+
+#define KEYBD_MATRIX_GET_INPUTS(inputs) \
+{\
+	inputs = (IDP_CPLD_KB_ROW & 0x7f);\
+}
+
+
diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h
new file mode 100644
index 0000000..600fd4f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-pxa/include/mach/io.h
+ *
+ * Copied from asm/arch/sa1100/io.h
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/include/asm-arm/arch-pxa/irda.h b/arch/arm/mach-pxa/include/mach/irda.h
similarity index 100%
rename from include/asm-arm/arch-pxa/irda.h
rename to arch/arm/mach-pxa/include/mach/irda.h
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
new file mode 100644
index 0000000..32772bc
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -0,0 +1,264 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/irqs.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#define PXA_IRQ(x)	(x)
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#define IRQ_SSP3	PXA_IRQ(0)	/* SSP3 service request */
+#define IRQ_MSL		PXA_IRQ(1)	/* MSL Interface interrupt */
+#define IRQ_USBH2	PXA_IRQ(2)	/* USB Host interrupt 1 (OHCI) */
+#define IRQ_USBH1	PXA_IRQ(3)	/* USB Host interrupt 2 (non-OHCI) */
+#define IRQ_KEYPAD	PXA_IRQ(4)	/* Key pad controller */
+#define IRQ_MEMSTK	PXA_IRQ(5)	/* Memory Stick interrupt */
+#define IRQ_PWRI2C	PXA_IRQ(6)	/* Power I2C interrupt */
+#endif
+
+#define IRQ_HWUART	PXA_IRQ(7)	/* HWUART Transmit/Receive/Error (PXA26x) */
+#define IRQ_OST_4_11	PXA_IRQ(7)	/* OS timer 4-11 matches (PXA27x) */
+#define	IRQ_GPIO0	PXA_IRQ(8)	/* GPIO0 Edge Detect */
+#define	IRQ_GPIO1	PXA_IRQ(9)	/* GPIO1 Edge Detect */
+#define	IRQ_GPIO_2_x	PXA_IRQ(10)	/* GPIO[2-x] Edge Detect */
+#define	IRQ_USB		PXA_IRQ(11)	/* USB Service */
+#define	IRQ_PMU		PXA_IRQ(12)	/* Performance Monitoring Unit */
+#define	IRQ_I2S		PXA_IRQ(13)	/* I2S Interrupt */
+#define	IRQ_AC97	PXA_IRQ(14)	/* AC97 Interrupt */
+#define IRQ_ASSP	PXA_IRQ(15)	/* Audio SSP Service Request (PXA25x) */
+#define IRQ_USIM	PXA_IRQ(15)     /* Smart Card interface interrupt (PXA27x) */
+#define IRQ_NSSP	PXA_IRQ(16)	/* Network SSP Service Request (PXA25x) */
+#define IRQ_SSP2	PXA_IRQ(16)	/* SSP2 interrupt (PXA27x) */
+#define	IRQ_LCD		PXA_IRQ(17)	/* LCD Controller Service Request */
+#define	IRQ_I2C		PXA_IRQ(18)	/* I2C Service Request */
+#define	IRQ_ICP		PXA_IRQ(19)	/* ICP Transmit/Receive/Error */
+#define	IRQ_STUART	PXA_IRQ(20)	/* STUART Transmit/Receive/Error */
+#define	IRQ_BTUART	PXA_IRQ(21)	/* BTUART Transmit/Receive/Error */
+#define	IRQ_FFUART	PXA_IRQ(22)	/* FFUART Transmit/Receive/Error*/
+#define	IRQ_MMC		PXA_IRQ(23)	/* MMC Status/Error Detection */
+#define	IRQ_SSP		PXA_IRQ(24)	/* SSP Service Request */
+#define	IRQ_DMA 	PXA_IRQ(25)	/* DMA Channel Service Request */
+#define	IRQ_OST0 	PXA_IRQ(26)	/* OS Timer match 0 */
+#define	IRQ_OST1 	PXA_IRQ(27)	/* OS Timer match 1 */
+#define	IRQ_OST2 	PXA_IRQ(28)	/* OS Timer match 2 */
+#define	IRQ_OST3 	PXA_IRQ(29)	/* OS Timer match 3 */
+#define	IRQ_RTC1Hz	PXA_IRQ(30)	/* RTC HZ Clock Tick */
+#define	IRQ_RTCAlrm	PXA_IRQ(31)	/* RTC Alarm */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#define IRQ_TPM		PXA_IRQ(32)	/* TPM interrupt */
+#define IRQ_CAMERA	PXA_IRQ(33)	/* Camera Interface */
+#endif
+
+#ifdef CONFIG_PXA3xx
+#define IRQ_SSP4	PXA_IRQ(13)	/* SSP4 service request */
+#define IRQ_CIR		PXA_IRQ(34)	/* Consumer IR */
+#define IRQ_TSI		PXA_IRQ(36)	/* Touch Screen Interface (PXA320) */
+#define IRQ_USIM2	PXA_IRQ(38)	/* USIM2 Controller */
+#define IRQ_GRPHICS	PXA_IRQ(39)	/* Graphics Controller */
+#define IRQ_MMC2	PXA_IRQ(41)	/* MMC2 Controller */
+#define IRQ_1WIRE	PXA_IRQ(44)	/* 1-Wire Controller */
+#define IRQ_NAND	PXA_IRQ(45)	/* NAND Controller */
+#define IRQ_USB2	PXA_IRQ(46)	/* USB 2.0 Device Controller */
+#define IRQ_WAKEUP0	PXA_IRQ(49)	/* EXT_WAKEUP0 */
+#define IRQ_WAKEUP1	PXA_IRQ(50)	/* EXT_WAKEUP1 */
+#define IRQ_DMEMC	PXA_IRQ(51)	/* Dynamic Memory Controller */
+#define IRQ_MMC3	PXA_IRQ(55)	/* MMC3 Controller (PXA310) */
+#endif
+
+#define PXA_GPIO_IRQ_BASE	(64)
+#define PXA_GPIO_IRQ_NUM	(128)
+
+#define GPIO_2_x_TO_IRQ(x)	(PXA_GPIO_IRQ_BASE + (x))
+#define IRQ_GPIO(x)	(((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
+
+#define IRQ_TO_GPIO_2_x(i)	((i) - PXA_GPIO_IRQ_BASE)
+#define IRQ_TO_GPIO(i)	(((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
+
+/*
+ * The next 16 interrupts are for board specific purposes.  Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these.  If you need more, increase IRQ_BOARD_END, but keep it
+ * within sensible limits.
+ */
+#define IRQ_BOARD_START		(PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
+#define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
+
+#define IRQ_SA1111_START	(IRQ_BOARD_END)
+#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
+#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
+#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
+#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
+#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
+#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
+#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
+#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
+#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
+#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
+#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
+#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
+#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
+#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
+#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
+#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
+#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
+#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
+#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
+#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
+#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
+#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
+#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
+#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
+#define SSPXMTINT		(IRQ_BOARD_END + 24)
+#define SSPRCVINT		(IRQ_BOARD_END + 25)
+#define SSPROR			(IRQ_BOARD_END + 26)
+#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
+#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
+#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
+#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
+#define AUDTFSR			(IRQ_BOARD_END + 36)
+#define AUDRFSR			(IRQ_BOARD_END + 37)
+#define AUDTUR			(IRQ_BOARD_END + 38)
+#define AUDROR			(IRQ_BOARD_END + 39)
+#define AUDDTS			(IRQ_BOARD_END + 40)
+#define AUDRDD			(IRQ_BOARD_END + 41)
+#define AUDSTO			(IRQ_BOARD_END + 42)
+#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
+#define IRQ_HCIM		(IRQ_BOARD_END + 44)
+#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
+#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
+#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
+#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
+#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
+#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
+#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
+#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
+#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
+#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
+
+#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
+#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
+#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
+#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
+#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
+#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
+#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
+#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
+#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
+#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
+#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
+#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
+#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
+#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
+#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
+#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
+#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
+#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
+#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
+#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
+#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
+#define IRQ_LOCOMO_SPI_OVRN	(IRQ_BOARD_END + 20)
+#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
+
+/*
+ * Figure out the MAX IRQ number.
+ *
+ * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
+ * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
+ * Otherwise, we have the standard IRQs only.
+ */
+#ifdef CONFIG_SA1111
+#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
+#elif defined(CONFIG_SHARP_LOCOMO)
+#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
+#elif defined(CONFIG_ARCH_LUBBOCK) || \
+      defined(CONFIG_MACH_LOGICPD_PXA270) || \
+      defined(CONFIG_MACH_TOSA) || \
+      defined(CONFIG_MACH_MAINSTONE) || \
+      defined(CONFIG_MACH_PCM027) || \
+      defined(CONFIG_MACH_MAGICIAN)
+#define NR_IRQS			(IRQ_BOARD_END)
+#elif defined(CONFIG_MACH_ZYLONITE)
+#define NR_IRQS			(IRQ_BOARD_START + 32)
+#else
+#define NR_IRQS			(IRQ_BOARD_START)
+#endif
+
+/*
+ * Board specific IRQs.  Define them here.
+ * Do not surround them with ifdefs.
+ */
+#define LUBBOCK_IRQ(x)		(IRQ_BOARD_START + (x))
+#define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
+#define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
+#define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
+#define LUBBOCK_ETH_IRQ		LUBBOCK_IRQ(3)
+#define LUBBOCK_UCB1400_IRQ	LUBBOCK_IRQ(4)
+#define LUBBOCK_BB_IRQ		LUBBOCK_IRQ(5)
+#define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
+#define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
+
+#define LPD270_IRQ(x)		(IRQ_BOARD_START + (x))
+#define LPD270_USBC_IRQ		LPD270_IRQ(2)
+#define LPD270_ETHERNET_IRQ	LPD270_IRQ(3)
+#define LPD270_AC97_IRQ		LPD270_IRQ(4)
+
+#define MAINSTONE_IRQ(x)	(IRQ_BOARD_START + (x))
+#define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
+#define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
+#define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
+#define MAINSTONE_ETHERNET_IRQ	MAINSTONE_IRQ(3)
+#define MAINSTONE_AC97_IRQ	MAINSTONE_IRQ(4)
+#define MAINSTONE_PEN_IRQ	MAINSTONE_IRQ(5)
+#define MAINSTONE_MSINS_IRQ	MAINSTONE_IRQ(6)
+#define MAINSTONE_EXBRD_IRQ	MAINSTONE_IRQ(7)
+#define MAINSTONE_S0_CD_IRQ	MAINSTONE_IRQ(9)
+#define MAINSTONE_S0_STSCHG_IRQ	MAINSTONE_IRQ(10)
+#define MAINSTONE_S0_IRQ	MAINSTONE_IRQ(11)
+#define MAINSTONE_S1_CD_IRQ	MAINSTONE_IRQ(13)
+#define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
+#define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
+
+/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
+#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
+#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
+#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
+#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
+
+/* phyCORE-PXA270 (PCM027) Interrupts */
+#define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
+#define PCM027_BTDET_IRQ       PCM027_IRQ(0)
+#define PCM027_FF_RI_IRQ       PCM027_IRQ(1)
+#define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
+#define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
+
+/* ITE8152 irqs */
+/* add IT8152 IRQs beyond BOARD_END */
+#ifdef CONFIG_PCI_HOST_ITE8152
+#define IT8152_IRQ(x)   (IRQ_BOARD_END + (x))
+
+/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
+#define IT8152_LD_IRQ_COUNT     9
+#define IT8152_LP_IRQ_COUNT     16
+#define IT8152_PD_IRQ_COUNT     15
+
+/* Priorities: */
+#define IT8152_PD_IRQ(i)        IT8152_IRQ(i)
+#define IT8152_LP_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
+#define IT8152_LD_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
+
+#define IT8152_LAST_IRQ         IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1)
+
+#if NR_IRQS < (IT8152_LAST_IRQ+1)
+#undef NR_IRQS
+#define NR_IRQS (IT8152_LAST_IRQ+1)
+#endif
+
+#endif /* CONFIG_PCI_HOST_ITE8152 */
diff --git a/include/asm-arm/arch-pxa/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
similarity index 100%
rename from include/asm-arm/arch-pxa/littleton.h
rename to arch/arm/mach-pxa/include/mach/littleton.h
diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h
new file mode 100644
index 0000000..f89fb71
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/lpd270.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-pxa/include/mach/lpd270.h
+ *
+ * Author:	Lennert Buytenhek
+ * Created:	Feb 10, 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_LPD270_H
+#define __ASM_ARCH_LPD270_H
+
+#define LPD270_CPLD_PHYS	PXA_CS2_PHYS
+#define LPD270_CPLD_VIRT	0xf0000000
+#define LPD270_CPLD_SIZE	0x00100000
+
+#define LPD270_ETH_PHYS		(PXA_CS2_PHYS + 0x01000000)
+
+/* CPLD registers  */
+#define LPD270_CPLD_REG(x)	((unsigned long)(LPD270_CPLD_VIRT + (x)))
+#define LPD270_CONTROL		LPD270_CPLD_REG(0x00)
+#define LPD270_PERIPHERAL0	LPD270_CPLD_REG(0x04)
+#define LPD270_PERIPHERAL1	LPD270_CPLD_REG(0x08)
+#define LPD270_CPLD_REVISION	LPD270_CPLD_REG(0x14)
+#define LPD270_EEPROM_SPI_ITF	LPD270_CPLD_REG(0x20)
+#define LPD270_MODE_PINS	LPD270_CPLD_REG(0x24)
+#define LPD270_EGPIO		LPD270_CPLD_REG(0x30)
+#define LPD270_INT_MASK		LPD270_CPLD_REG(0x40)
+#define LPD270_INT_STATUS	LPD270_CPLD_REG(0x50)
+
+#define LPD270_INT_AC97		(1 << 4)  /* AC'97 CODEC IRQ */
+#define LPD270_INT_ETHERNET	(1 << 3)  /* Ethernet controller IRQ */
+#define LPD270_INT_USBC		(1 << 2)  /* USB client cable detection IRQ */
+
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
new file mode 100644
index 0000000..4cb2415
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -0,0 +1,40 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/lubbock.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define LUBBOCK_ETH_PHYS	PXA_CS3_PHYS
+
+#define LUBBOCK_FPGA_PHYS	PXA_CS2_PHYS
+#define LUBBOCK_FPGA_VIRT	(0xf0000000)
+#define LUB_P2V(x)		((x) - LUBBOCK_FPGA_PHYS + LUBBOCK_FPGA_VIRT)
+#define LUB_V2P(x)		((x) - LUBBOCK_FPGA_VIRT + LUBBOCK_FPGA_PHYS)
+
+#ifndef __ASSEMBLY__
+#  define __LUB_REG(x)		(*((volatile unsigned long *)LUB_P2V(x)))
+#else
+#  define __LUB_REG(x)		LUB_P2V(x)
+#endif
+
+/* FPGA register virtual addresses */
+#define LUB_WHOAMI		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x000)
+#define LUB_HEXLED		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
+#define LUB_DISC_BLNK_LED	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x040)
+#define LUB_CONF_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x050)
+#define LUB_USER_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x060)
+#define LUB_MISC_WR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
+#define LUB_MISC_RD		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x090)
+#define LUB_IRQ_MASK_EN		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0c0)
+#define LUB_IRQ_SET_CLR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
+#define LUB_GP			__LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
+
+#ifndef __ASSEMBLY__
+extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
new file mode 100644
index 0000000..38d68d9
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -0,0 +1,117 @@
+/*
+ * GPIO and IRQ definitions for HTC Magician PDA phones
+ *
+ * Copyright (c) 2007 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MAGICIAN_H_
+#define _MAGICIAN_H_
+
+#include <mach/irqs.h>
+
+/*
+ * PXA GPIOs
+ */
+
+#define GPIO0_MAGICIAN_KEY_POWER		0
+#define GPIO9_MAGICIAN_UNKNOWN			9
+#define GPIO10_MAGICIAN_GSM_IRQ			10
+#define GPIO11_MAGICIAN_GSM_OUT1		11
+#define GPIO13_MAGICIAN_CPLD_IRQ		13
+#define GPIO18_MAGICIAN_UNKNOWN			18
+#define GPIO22_MAGICIAN_VIBRA_EN		22
+#define GPIO26_MAGICIAN_GSM_POWER		26
+#define GPIO27_MAGICIAN_USBC_PUEN		27
+#define GPIO30_MAGICIAN_nCHARGE_EN		30
+#define GPIO37_MAGICIAN_KEY_HANGUP		37
+#define GPIO38_MAGICIAN_KEY_CONTACTS		38
+#define GPIO40_MAGICIAN_GSM_OUT2		40
+#define GPIO48_MAGICIAN_UNKNOWN			48
+#define GPIO56_MAGICIAN_UNKNOWN			56
+#define GPIO57_MAGICIAN_CAM_RESET		57
+#define GPIO75_MAGICIAN_SAMSUNG_POWER		75
+#define GPIO83_MAGICIAN_nIR_EN			83
+#define GPIO86_MAGICIAN_GSM_RESET		86
+#define GPIO87_MAGICIAN_GSM_SELECT		87
+#define GPIO90_MAGICIAN_KEY_CALENDAR		90
+#define GPIO91_MAGICIAN_KEY_CAMERA		91
+#define GPIO93_MAGICIAN_KEY_UP			93
+#define GPIO94_MAGICIAN_KEY_DOWN		94
+#define GPIO95_MAGICIAN_KEY_LEFT		95
+#define GPIO96_MAGICIAN_KEY_RIGHT		96
+#define GPIO97_MAGICIAN_KEY_ENTER		97
+#define GPIO98_MAGICIAN_KEY_RECORD		98
+#define GPIO99_MAGICIAN_HEADPHONE_IN		99
+#define GPIO100_MAGICIAN_KEY_VOL_UP		100
+#define GPIO101_MAGICIAN_KEY_VOL_DOWN 		101
+#define GPIO102_MAGICIAN_KEY_PHONE		102
+#define GPIO103_MAGICIAN_LED_KP			103
+#define GPIO104_MAGICIAN_LCD_POWER_1 		104
+#define GPIO105_MAGICIAN_LCD_POWER_2		105
+#define GPIO106_MAGICIAN_LCD_POWER_3		106
+#define GPIO107_MAGICIAN_DS1WM_IRQ		107
+#define GPIO108_MAGICIAN_GSM_READY		108
+#define GPIO114_MAGICIAN_UNKNOWN		114
+#define GPIO115_MAGICIAN_nPEN_IRQ		115
+#define GPIO116_MAGICIAN_nCAM_EN		116
+#define GPIO119_MAGICIAN_UNKNOWN		119
+#define GPIO120_MAGICIAN_UNKNOWN		120
+
+/*
+ * CPLD IRQs
+ */
+
+#define IRQ_MAGICIAN_SD		(IRQ_BOARD_START + 0)
+#define IRQ_MAGICIAN_EP		(IRQ_BOARD_START + 1)
+#define IRQ_MAGICIAN_BT		(IRQ_BOARD_START + 2)
+#define IRQ_MAGICIAN_AC		(IRQ_BOARD_START + 3)
+
+/*
+ * CPLD EGPIOs
+ */
+
+#define MAGICIAN_EGPIO_BASE			0x80 /* GPIO_BOARD_START */
+#define MAGICIAN_EGPIO(reg,bit) \
+	(MAGICIAN_EGPIO_BASE + 8*reg + bit)
+
+/* output */
+
+#define EGPIO_MAGICIAN_TOPPOLY_POWER		MAGICIAN_EGPIO(0, 2)
+#define EGPIO_MAGICIAN_LED_POWER		MAGICIAN_EGPIO(0, 5)
+#define EGPIO_MAGICIAN_GSM_RESET		MAGICIAN_EGPIO(0, 6)
+#define EGPIO_MAGICIAN_LCD_POWER		MAGICIAN_EGPIO(0, 7)
+#define EGPIO_MAGICIAN_SPK_POWER		MAGICIAN_EGPIO(1, 0)
+#define EGPIO_MAGICIAN_EP_POWER			MAGICIAN_EGPIO(1, 1)
+#define EGPIO_MAGICIAN_IN_SEL0			MAGICIAN_EGPIO(1, 2)
+#define EGPIO_MAGICIAN_IN_SEL1			MAGICIAN_EGPIO(1, 3)
+#define EGPIO_MAGICIAN_MIC_POWER		MAGICIAN_EGPIO(1, 4)
+#define EGPIO_MAGICIAN_CODEC_RESET		MAGICIAN_EGPIO(1, 5)
+#define EGPIO_MAGICIAN_CODEC_POWER		MAGICIAN_EGPIO(1, 6)
+#define EGPIO_MAGICIAN_BL_POWER			MAGICIAN_EGPIO(1, 7)
+#define EGPIO_MAGICIAN_SD_POWER			MAGICIAN_EGPIO(2, 0)
+#define EGPIO_MAGICIAN_CARKIT_MIC		MAGICIAN_EGPIO(2, 1)
+#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL	MAGICIAN_EGPIO(2, 2)
+#define EGPIO_MAGICIAN_FLASH_VPP		MAGICIAN_EGPIO(2, 3)
+#define EGPIO_MAGICIAN_BL_POWER2		MAGICIAN_EGPIO(2, 4)
+#define EGPIO_MAGICIAN_CHARGE_EN		MAGICIAN_EGPIO(2, 5)
+#define EGPIO_MAGICIAN_GSM_POWER		MAGICIAN_EGPIO(2, 7)
+
+/* input */
+
+#define EGPIO_MAGICIAN_CABLE_STATE_AC		MAGICIAN_EGPIO(4, 0)
+#define EGPIO_MAGICIAN_CABLE_STATE_USB		MAGICIAN_EGPIO(4, 1)
+
+#define EGPIO_MAGICIAN_BOARD_ID0		MAGICIAN_EGPIO(5, 0)
+#define EGPIO_MAGICIAN_BOARD_ID1		MAGICIAN_EGPIO(5, 1)
+#define EGPIO_MAGICIAN_BOARD_ID2		MAGICIAN_EGPIO(5, 2)
+#define EGPIO_MAGICIAN_LCD_SELECT		MAGICIAN_EGPIO(5, 3)
+#define EGPIO_MAGICIAN_nSD_READONLY		MAGICIAN_EGPIO(5, 4)
+
+#define EGPIO_MAGICIAN_EP_INSERT		MAGICIAN_EGPIO(6, 1)
+
+#endif /* _MAGICIAN_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
new file mode 100644
index 0000000..3461c43
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -0,0 +1,120 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/mainstone.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Nov 14, 2002
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARCH_MAINSTONE_H
+#define ASM_ARCH_MAINSTONE_H
+
+#define MST_ETH_PHYS		PXA_CS4_PHYS
+
+#define MST_FPGA_PHYS		PXA_CS2_PHYS
+#define MST_FPGA_VIRT		(0xf0000000)
+#define MST_P2V(x)		((x) - MST_FPGA_PHYS + MST_FPGA_VIRT)
+#define MST_V2P(x)		((x) - MST_FPGA_VIRT + MST_FPGA_PHYS)
+
+#ifndef __ASSEMBLY__
+# define __MST_REG(x)		(*((volatile unsigned long *)MST_P2V(x)))
+#else
+# define __MST_REG(x)		MST_P2V(x)
+#endif
+
+/* board level registers in the FPGA */
+
+#define MST_LEDDAT1		__MST_REG(0x08000010)
+#define MST_LEDDAT2		__MST_REG(0x08000014)
+#define MST_LEDCTRL		__MST_REG(0x08000040)
+#define MST_GPSWR		__MST_REG(0x08000060)
+#define MST_MSCWR1		__MST_REG(0x08000080)
+#define MST_MSCWR2		__MST_REG(0x08000084)
+#define MST_MSCWR3		__MST_REG(0x08000088)
+#define MST_MSCRD		__MST_REG(0x08000090)
+#define MST_INTMSKENA		__MST_REG(0x080000c0)
+#define MST_INTSETCLR		__MST_REG(0x080000d0)
+#define MST_PCMCIA0		__MST_REG(0x080000e0)
+#define MST_PCMCIA1		__MST_REG(0x080000e4)
+
+#define MST_MSCWR1_CAMERA_ON	(1 << 15)  /* Camera interface power control */
+#define MST_MSCWR1_CAMERA_SEL	(1 << 14)  /* Camera interface mux control */
+#define MST_MSCWR1_LCD_CTL	(1 << 13)  /* General-purpose LCD control */
+#define MST_MSCWR1_MS_ON	(1 << 12)  /* Memory Stick power control */
+#define MST_MSCWR1_MMC_ON	(1 << 11)  /* MultiMediaCard* power control */
+#define MST_MSCWR1_MS_SEL	(1 << 10)  /* SD/MS multiplexer control */
+#define MST_MSCWR1_BB_SEL	(1 << 9)   /* PCMCIA/Baseband multiplexer */
+#define MST_MSCWR1_BT_ON	(1 << 8)   /* Bluetooth UART transceiver */
+#define MST_MSCWR1_BTDTR	(1 << 7)   /* Bluetooth UART DTR */
+
+#define MST_MSCWR1_IRDA_MASK	(3 << 5)   /* IrDA transceiver mode */
+#define MST_MSCWR1_IRDA_FULL	(0 << 5)   /* full distance power */
+#define MST_MSCWR1_IRDA_OFF	(1 << 5)   /* shutdown */
+#define MST_MSCWR1_IRDA_MED	(2 << 5)   /* 2/3 distance power */
+#define MST_MSCWR1_IRDA_LOW	(3 << 5)   /* 1/3 distance power */
+
+#define MST_MSCWR1_IRDA_FIR	(1 << 4)   /* IrDA transceiver SIR/FIR */
+#define MST_MSCWR1_GREENLED	(1 << 3)   /* LED D1 control */
+#define MST_MSCWR1_PDC_CTL	(1 << 2)   /* reserved */
+#define MST_MSCWR1_MTR_ON	(1 << 1)   /* Silent alert motor */
+#define MST_MSCWR1_SYSRESET	(1 << 0)   /* System reset */
+
+#define MST_MSCWR2_USB_OTG_RST	(1 << 6)   /* USB On The Go reset */
+#define MST_MSCWR2_USB_OTG_SEL	(1 << 5)   /* USB On The Go control */
+#define MST_MSCWR2_nUSBC_SC	(1 << 4)   /* USB client soft connect control */
+#define MST_MSCWR2_I2S_SPKROFF	(1 << 3)   /* I2S CODEC amplifier control */
+#define MST_MSCWR2_AC97_SPKROFF	(1 << 2)   /* AC97 CODEC amplifier control */
+#define MST_MSCWR2_RADIO_PWR	(1 << 1)   /* Radio module power control */
+#define MST_MSCWR2_RADIO_WAKE	(1 << 0)   /* Radio module wake-up signal */
+
+#define MST_MSCWR3_GPIO_RESET_EN	(1 << 2) /* Enable GPIO Reset */
+#define MST_MSCWR3_GPIO_RESET		(1 << 1) /* Initiate a GPIO Reset */
+#define MST_MSCWR3_COMMS_SW_RESET	(1 << 0) /* Communications Processor Reset Control */
+
+#define MST_MSCRD_nPENIRQ	(1 << 9)   /* ADI7873* nPENIRQ signal */
+#define MST_MSCRD_nMEMSTK_CD	(1 << 8)   /* Memory Stick detection signal */
+#define MST_MSCRD_nMMC_CD	(1 << 7)   /* SD/MMC card detection signal */
+#define MST_MSCRD_nUSIM_CD	(1 << 6)   /* USIM card detection signal */
+#define MST_MSCRD_USB_CBL	(1 << 5)   /* USB client cable status */
+#define MST_MSCRD_TS_BUSY	(1 << 4)   /* ADI7873 busy */
+#define MST_MSCRD_BTDSR		(1 << 3)   /* Bluetooth UART DSR */
+#define MST_MSCRD_BTRI		(1 << 2)   /* Bluetooth UART Ring Indicator */
+#define MST_MSCRD_BTDCD		(1 << 1)   /* Bluetooth UART DCD */
+#define MST_MSCRD_nMMC_WP	(1 << 0)   /* SD/MMC write-protect status */
+
+#define MST_INT_S1_IRQ		(1 << 15)  /* PCMCIA socket 1 IRQ */
+#define MST_INT_S1_STSCHG	(1 << 14)  /* PCMCIA socket 1 status changed */
+#define MST_INT_S1_CD		(1 << 13)  /* PCMCIA socket 1 card detection */
+#define MST_INT_S0_IRQ		(1 << 11)  /* PCMCIA socket 0 IRQ */
+#define MST_INT_S0_STSCHG	(1 << 10)  /* PCMCIA socket 0 status changed */
+#define MST_INT_S0_CD		(1 << 9)   /* PCMCIA socket 0 card detection */
+#define MST_INT_nEXBRD_INT	(1 << 7)   /* Expansion board IRQ */
+#define MST_INT_MSINS		(1 << 6)   /* Memory Stick* detection */
+#define MST_INT_PENIRQ		(1 << 5)   /* ADI7873* touch-screen IRQ */
+#define MST_INT_AC97		(1 << 4)   /* AC'97 CODEC IRQ */
+#define MST_INT_ETHERNET	(1 << 3)   /* Ethernet controller IRQ */
+#define MST_INT_USBC		(1 << 2)   /* USB client cable detection IRQ */
+#define MST_INT_USIM		(1 << 1)   /* USIM card detection IRQ */
+#define MST_INT_MMC		(1 << 0)   /* MMC/SD card detection IRQ */
+
+#define MST_PCMCIA_nIRQ		(1 << 10)  /* IRQ / ready signal */
+#define MST_PCMCIA_nSPKR_BVD2	(1 << 9)   /* VDD sense / digital speaker */
+#define MST_PCMCIA_nSTSCHG_BVD1	(1 << 8)   /* VDD sense / card status changed */
+#define MST_PCMCIA_nVS2		(1 << 7)   /* VSS voltage sense */
+#define MST_PCMCIA_nVS1		(1 << 6)   /* VSS voltage sense */
+#define MST_PCMCIA_nCD		(1 << 5)   /* Card detection signal */
+#define MST_PCMCIA_RESET	(1 << 4)   /* Card reset signal */
+#define MST_PCMCIA_PWR_MASK	(0x000f)   /* MAX1602 power-supply controls */
+
+#define MST_PCMCIA_PWR_VPP_0    0x0	   /* voltage VPP = 0V */
+#define MST_PCMCIA_PWR_VPP_120  0x2 	   /* voltage VPP = 12V*/
+#define MST_PCMCIA_PWR_VPP_VCC  0x1	   /* voltage VPP = VCC */
+#define MST_PCMCIA_PWR_VCC_0    0x0	   /* voltage VCC = 0V */
+#define MST_PCMCIA_PWR_VCC_33   0x8	   /* voltage VCC = 3.3V */
+#define MST_PCMCIA_PWR_VCC_50   0x4	   /* voltage VCC = 5.0V */
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
new file mode 100644
index 0000000..552eb7f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -0,0 +1,52 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/memory.h
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0xa0000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	 __virt_to_phys(x)
+#define __bus_to_virt(x)	 __phys_to_virt(x)
+
+/*
+ * The nodes are matched with the physical SDRAM banks as follows:
+ *
+ * 	node 0:  0xa0000000-0xa3ffffff	-->  0xc0000000-0xc3ffffff
+ * 	node 1:  0xa4000000-0xa7ffffff	-->  0xc4000000-0xc7ffffff
+ * 	node 2:  0xa8000000-0xabffffff	-->  0xc8000000-0xcbffffff
+ * 	node 3:  0xac000000-0xafffffff	-->  0xcc000000-0xcfffffff
+ *
+ * This needs a node mem size of 26 bits.
+ */
+#define NODE_MEM_SIZE_BITS	26
+
+#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+void cmx270_pci_adjust_zones(int node, unsigned long *size,
+			     unsigned long *holes);
+
+#define arch_adjust_zones(node, size, holes) \
+	cmx270_pci_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_64M - 1)
+#endif
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
new file mode 100644
index 0000000..6c8e722
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -0,0 +1,161 @@
+#ifndef __ASM_ARCH_MFP_PXA25X_H
+#define __ASM_ARCH_MFP_PXA25X_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa2xx.h>
+
+/* GPIO */
+#define GPIO2_GPIO		MFP_CFG_IN(GPIO2, AF0)
+#define GPIO3_GPIO		MFP_CFG_IN(GPIO3, AF0)
+#define GPIO4_GPIO		MFP_CFG_IN(GPIO4, AF0)
+#define GPIO5_GPIO		MFP_CFG_IN(GPIO5, AF0)
+#define GPIO6_GPIO		MFP_CFG_IN(GPIO6, AF0)
+#define GPIO7_GPIO		MFP_CFG_IN(GPIO7, AF0)
+#define GPIO8_GPIO		MFP_CFG_IN(GPIO8, AF0)
+
+#define GPIO1_RST		MFP_CFG_IN(GPIO1, AF1)
+
+/* Crystal and Clock Signals */
+#define GPIO10_RTCCLK		MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
+#define GPIO70_RTC_CLK		MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW)
+#define GPIO7_48MHz		MFP_CFG_OUT(GPIO7,  AF1, DRIVE_LOW)
+#define GPIO11_3_6MHz		MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
+#define GPIO71_3_6MHz		MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW)
+#define GPIO12_32KHz		MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
+#define GPIO72_32kHz		MFP_CFG_OUT(GPIO72, AF1, DRIVE_LOW)
+
+/* SDRAM and Static Memory I/O Signals */
+#define GPIO15_nCS_1		MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
+#define GPIO78_nCS_2		MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
+#define GPIO79_nCS_3		MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
+#define GPIO80_nCS_4		MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
+#define GPIO33_nCS_5		MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
+
+/* Miscellaneous I/O and DMA Signals */
+#define GPIO18_RDY		MFP_CFG_IN(GPIO18, AF1)
+#define GPIO20_DREQ_0		MFP_CFG_IN(GPIO20, AF1)
+#define GPIO19_DREQ_1		MFP_CFG_IN(GPIO19, AF1)
+
+/* Alternate Bus Master Mode I/O Signals */
+#define GPIO13_MBGNT		MFP_CFG_OUT(GPIO13, AF2, DRIVE_LOW)
+#define GPIO73_MBGNT		MFP_CFG_OUT(GPIO73, AF1, DRIVE_LOW)
+#define GPIO14_MBREQ		MFP_CFG_IN(GPIO14, AF1)
+#define GPIO66_MBREQ		MFP_CFG_IN(GPIO66, AF1)
+
+/* PC CARD */
+#define GPIO52_nPCE_1		MFP_CFG_OUT(GPIO52, AF2, DRIVE_HIGH)
+#define GPIO53_nPCE_2		MFP_CFG_OUT(GPIO53, AF2, DRIVE_HIGH)
+#define GPIO55_nPREG		MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
+#define GPIO50_nPIOR		MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
+#define GPIO51_nPIOW		MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
+#define GPIO49_nPWE		MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
+#define GPIO48_nPOE		MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
+#define GPIO57_nIOIS16		MFP_CFG_IN(GPIO57, AF1)
+#define GPIO56_nPWAIT		MFP_CFG_IN(GPIO56, AF1)
+#define GPIO54_nPSKTSEL		MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
+
+/* FFUART */
+#define GPIO34_FFUART_RXD	MFP_CFG_IN(GPIO34, AF1)
+#define GPIO35_FFUART_CTS	MFP_CFG_IN(GPIO35, AF1)
+#define GPIO36_FFUART_DCD	MFP_CFG_IN(GPIO36, AF1)
+#define GPIO37_FFUART_DSR	MFP_CFG_IN(GPIO37, AF1)
+#define GPIO38_FFUART_RI	MFP_CFG_IN(GPIO38, AF1)
+#define GPIO39_FFUART_TXD	MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
+#define GPIO40_FFUART_DTR	MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
+#define GPIO41_FFUART_RTS	MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
+
+/* BTUART */
+#define GPIO42_BTUART_RXD	MFP_CFG_IN(GPIO42, AF1)
+#define GPIO43_BTUART_TXD	MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
+#define GPIO44_BTUART_CTS	MFP_CFG_IN(GPIO44, AF1)
+#define GPIO45_BTUART_RTS	MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
+
+/* STUART */
+#define GPIO46_STUART_RXD	MFP_CFG_IN(GPIO46, AF2)
+#define GPIO47_STUART_TXD	MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
+
+/* HWUART */
+#define GPIO42_HWUART_RXD	MFP_CFG_IN(GPIO42, AF3)
+#define GPIO43_HWUART_TXD	MFP_CFG_OUT(GPIO43, AF3, DRIVE_HIGH)
+#define GPIO44_HWUART_CTS	MFP_CFG_IN(GPIO44, AF3)
+#define GPIO45_HWUART_RTS	MFP_CFG_OUT(GPIO45, AF3, DRIVE_HIGH)
+#define GPIO48_HWUART_TXD	MFP_CFG_OUT(GPIO48, AF1, DRIVE_HIGH)
+#define GPIO49_HWUART_RXD	MFP_CFG_IN(GPIO49, AF1)
+#define GPIO50_HWUART_CTS	MFP_CFG_IN(GPIO50, AF1)
+#define GPIO51_HWUART_RTS	MFP_CFG_OUT(GPIO51, AF1, DRIVE_HIGH)
+
+/* FICP */
+#define GPIO46_FICP_RXD		MFP_CFG_IN(GPIO46, AF1)
+#define GPIO47_FICP_TXD		MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
+
+/* PWM 0/1 */
+#define GPIO16_PWM0_OUT		MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
+#define GPIO17_PWM1_OUT		MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
+
+/* AC97 */
+#define GPIO28_AC97_BITCLK	MFP_CFG_IN(GPIO28, AF1)
+#define GPIO29_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO29, AF1)
+#define GPIO30_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
+#define GPIO31_AC97_SYNC	MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
+#define GPIO32_AC97_SDATA_IN_1	MFP_CFG_IN(GPIO32, AF1)
+
+/* I2S */
+#define GPIO28_I2S_BITCLK_IN	MFP_CFG_IN(GPIO28, AF2)
+#define GPIO28_I2S_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
+#define GPIO29_I2S_SDATA_IN	MFP_CFG_IN(GPIO29, AF2)
+#define GPIO30_I2S_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
+#define GPIO31_I2S_SYNC		MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
+#define GPIO32_I2S_SYSCLK	MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
+
+/* SSP 1 */
+#define GPIO23_SSP1_SCLK	MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
+#define GPIO24_SSP1_SFRM	MFP_CFG_OUT(GPIO24, AF2, DRIVE_LOW)
+#define GPIO25_SSP1_TXD		MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
+#define GPIO26_SSP1_RXD		MFP_CFG_IN(GPIO26, AF1)
+#define GPIO27_SSP1_EXTCLK	MFP_CFG_IN(GPIO27, AF1)
+
+/* SSP 2 - NSSP */
+#define GPIO81_SSP2_CLK_OUT 	MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
+#define GPIO81_SSP2_CLK_IN  	MFP_CFG_IN(GPIO81, AF1)
+#define GPIO82_SSP2_FRM_OUT 	MFP_CFG_OUT(GPIO82, AF1, DRIVE_LOW)
+#define GPIO82_SSP2_FRM_IN  	MFP_CFG_IN(GPIO82, AF1)
+#define GPIO83_SSP2_TXD      	MFP_CFG_OUT(GPIO83, AF1, DRIVE_LOW)
+#define GPIO83_SSP2_RXD      	MFP_CFG_IN(GPIO83, AF2)
+#define GPIO84_SSP2_TXD      	MFP_CFG_OUT(GPIO84, AF1, DRIVE_LOW)
+#define GPIO84_SSP2_RXD      	MFP_CFG_IN(GPIO84, AF2)
+
+/* MMC */
+#define GPIO6_MMC_CLK		MFP_CFG_OUT(GPIO6, AF1, DRIVE_LOW)
+#define GPIO8_MMC_CS0		MFP_CFG_OUT(GPIO8, AF1, DRIVE_LOW)
+#define GPIO9_MMC_CS1		MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW)
+#define GPIO34_MMC_CS0		MFP_CFG_OUT(GPIO34, AF2, DRIVE_LOW)
+#define GPIO39_MMC_CS1		MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
+#define GPIO53_MMC_CLK		MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
+#define GPIO54_MMC_CLK		MFP_CFG_OUT(GPIO54, AF1, DRIVE_LOW)
+#define GPIO69_MMC_CLK		MFP_CFG_OUT(GPIO69, AF1, DRIVE_LOW)
+#define GPIO67_MMC_CS0		MFP_CFG_OUT(GPIO67, AF1, DRIVE_LOW)
+#define GPIO68_MMC_CS1		MFP_CFG_OUT(GPIO68, AF1, DRIVE_LOW)
+
+/* LCD */
+#define GPIO58_LCD_LDD_0	MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
+#define GPIO59_LCD_LDD_1	MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
+#define GPIO60_LCD_LDD_2	MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
+#define GPIO61_LCD_LDD_3	MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
+#define GPIO62_LCD_LDD_4	MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
+#define GPIO63_LCD_LDD_5	MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
+#define GPIO64_LCD_LDD_6	MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
+#define GPIO65_LCD_LDD_7	MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
+#define GPIO66_LCD_LDD_8	MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
+#define GPIO67_LCD_LDD_9	MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
+#define GPIO68_LCD_LDD_10	MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
+#define GPIO69_LCD_LDD_11	MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
+#define GPIO70_LCD_LDD_12	MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
+#define GPIO71_LCD_LDD_13	MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
+#define GPIO72_LCD_LDD_14	MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
+#define GPIO73_LCD_LDD_15	MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
+#define GPIO74_LCD_FCLK		MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
+#define GPIO75_LCD_LCLK		MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
+#define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
+#define GPIO77_LCD_ACBIAS	MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+
+#endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
new file mode 100644
index 0000000..122bdbd
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -0,0 +1,433 @@
+#ifndef __ASM_ARCH_MFP_PXA27X_H
+#define __ASM_ARCH_MFP_PXA27X_H
+
+/*
+ * NOTE:  for those special-function bidirectional GPIOs, as described
+ * in the "PXA27x Developer's Manual" Section 24.4.2.1, only its input
+ * alternative is preserved, the direction is actually selected by the
+ * specific controller, and this should work in most cases.
+ */
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa2xx.h>
+
+/* GPIO */
+#define GPIO85_GPIO		MFP_CFG_IN(GPIO85, AF0)
+#define GPIO86_GPIO		MFP_CFG_IN(GPIO86, AF0)
+#define GPIO87_GPIO		MFP_CFG_IN(GPIO87, AF0)
+#define GPIO88_GPIO		MFP_CFG_IN(GPIO88, AF0)
+#define GPIO89_GPIO		MFP_CFG_IN(GPIO89, AF0)
+#define GPIO90_GPIO		MFP_CFG_IN(GPIO90, AF0)
+#define GPIO91_GPIO		MFP_CFG_IN(GPIO91, AF0)
+#define GPIO92_GPIO		MFP_CFG_IN(GPIO92, AF0)
+#define GPIO93_GPIO		MFP_CFG_IN(GPIO93, AF0)
+#define GPIO94_GPIO		MFP_CFG_IN(GPIO94, AF0)
+#define GPIO95_GPIO		MFP_CFG_IN(GPIO95, AF0)
+#define GPIO96_GPIO		MFP_CFG_IN(GPIO96, AF0)
+#define GPIO97_GPIO		MFP_CFG_IN(GPIO97, AF0)
+#define GPIO98_GPIO		MFP_CFG_IN(GPIO98, AF0)
+#define GPIO99_GPIO		MFP_CFG_IN(GPIO99, AF0)
+#define GPIO100_GPIO		MFP_CFG_IN(GPIO100, AF0)
+#define GPIO101_GPIO		MFP_CFG_IN(GPIO101, AF0)
+#define GPIO102_GPIO		MFP_CFG_IN(GPIO102, AF0)
+#define GPIO103_GPIO		MFP_CFG_IN(GPIO103, AF0)
+#define GPIO104_GPIO		MFP_CFG_IN(GPIO104, AF0)
+#define GPIO105_GPIO		MFP_CFG_IN(GPIO105, AF0)
+#define GPIO106_GPIO		MFP_CFG_IN(GPIO106, AF0)
+#define GPIO107_GPIO		MFP_CFG_IN(GPIO107, AF0)
+#define GPIO108_GPIO		MFP_CFG_IN(GPIO108, AF0)
+#define GPIO109_GPIO		MFP_CFG_IN(GPIO109, AF0)
+#define GPIO110_GPIO		MFP_CFG_IN(GPIO110, AF0)
+#define GPIO111_GPIO		MFP_CFG_IN(GPIO111, AF0)
+#define GPIO112_GPIO		MFP_CFG_IN(GPIO112, AF0)
+#define GPIO113_GPIO		MFP_CFG_IN(GPIO113, AF0)
+#define GPIO114_GPIO		MFP_CFG_IN(GPIO114, AF0)
+#define GPIO115_GPIO		MFP_CFG_IN(GPIO115, AF0)
+#define GPIO116_GPIO		MFP_CFG_IN(GPIO116, AF0)
+#define GPIO117_GPIO		MFP_CFG_IN(GPIO117, AF0)
+#define GPIO118_GPIO		MFP_CFG_IN(GPIO118, AF0)
+#define GPIO119_GPIO		MFP_CFG_IN(GPIO119, AF0)
+#define GPIO120_GPIO		MFP_CFG_IN(GPIO120, AF0)
+
+/* Crystal and Clock Signals */
+#define GPIO9_HZ_CLK		MFP_CFG_OUT(GPIO9,  AF1, DRIVE_LOW)
+#define GPIO10_HZ_CLK		MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
+#define GPIO11_48_MHz		MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW)
+#define GPIO12_48_MHz		MFP_CFG_OUT(GPIO12, AF3, DRIVE_LOW)
+#define GPIO13_CLK_EXT		MFP_CFG_IN(GPIO13, AF1)
+
+/* OS Timer Signals */
+#define GPIO11_EXT_SYNC_0	MFP_CFG_IN(GPIO11, AF1)
+#define GPIO12_EXT_SYNC_1	MFP_CFG_IN(GPIO12, AF1)
+#define GPIO9_CHOUT_0		MFP_CFG_OUT(GPIO9,  AF3, DRIVE_LOW)
+#define GPIO10_CHOUT_1		MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW)
+#define GPIO11_CHOUT_0		MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
+#define GPIO12_CHOUT_1		MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
+
+/* SDRAM and Static Memory I/O Signals */
+#define GPIO20_nSDCS_2		MFP_CFG_OUT(GPIO20, AF1, DRIVE_HIGH)
+#define GPIO21_nSDCS_3		MFP_CFG_OUT(GPIO21, AF1, DRIVE_HIGH)
+#define GPIO15_nCS_1		MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
+#define GPIO78_nCS_2		MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
+#define GPIO79_nCS_3		MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
+#define GPIO80_nCS_4		MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
+#define GPIO33_nCS_5		MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
+
+/* Miscellaneous I/O and DMA Signals */
+#define GPIO21_DVAL_0		MFP_CFG_OUT(GPIO21, AF2, DRIVE_HIGH)
+#define GPIO116_DVAL_0		MFP_CFG_OUT(GPIO116, AF1, DRIVE_HIGH)
+#define GPIO33_DVAL_1		MFP_CFG_OUT(GPIO33, AF1, DRIVE_HIGH)
+#define GPIO96_DVAL_1		MFP_CFG_OUT(GPIO96, AF2, DRIVE_HIGH)
+#define GPIO18_RDY		MFP_CFG_IN(GPIO18, AF1)
+#define GPIO20_DREQ_0		MFP_CFG_IN(GPIO20, AF1)
+#define GPIO115_DREQ_0		MFP_CFG_IN(GPIO115, AF1)
+#define GPIO80_DREQ_1		MFP_CFG_IN(GPIO80, AF1)
+#define GPIO97_DREQ_1		MFP_CFG_IN(GPIO97, AF2)
+#define GPIO85_DREQ_2		MFP_CFG_IN(GPIO85, AF2)
+#define GPIO100_DREQ_2		MFP_CFG_IN(GPIO100, AF2)
+
+/* Alternate Bus Master Mode I/O Signals */
+#define GPIO20_MBREQ		MFP_CFG_IN(GPIO20, AF2)
+#define GPIO80_MBREQ		MFP_CFG_IN(GPIO80, AF2)
+#define GPIO96_MBREQ		MFP_CFG_IN(GPIO96, AF2)
+#define GPIO115_MBREQ		MFP_CFG_IN(GPIO115, AF3)
+#define GPIO21_MBGNT		MFP_CFG_OUT(GPIO21, AF3, DRIVE_LOW)
+#define GPIO33_MBGNT		MFP_CFG_OUT(GPIO33, AF3, DRIVE_LOW)
+#define GPIO97_MBGNT		MFP_CFG_OUT(GPIO97, AF2, DRIVE_LOW)
+#define GPIO116_MBGNT		MFP_CFG_OUT(GPIO116, AF3, DRIVE_LOW)
+
+/* PC CARD */
+#define GPIO15_nPCE_1		MFP_CFG_OUT(GPIO15, AF1, DRIVE_HIGH)
+#define GPIO85_nPCE_1		MFP_CFG_OUT(GPIO85, AF1, DRIVE_HIGH)
+#define GPIO86_nPCE_1		MFP_CFG_OUT(GPIO86, AF1, DRIVE_HIGH)
+#define GPIO102_nPCE_1		MFP_CFG_OUT(GPIO102, AF1, DRIVE_HIGH)
+#define GPIO54_nPCE_2		MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
+#define GPIO78_nPCE_2		MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH)
+#define GPIO87_nPCE_2		MFP_CFG_IN(GPIO87, AF1)
+#define GPIO55_nPREG		MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
+#define GPIO50_nPIOR		MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
+#define GPIO51_nPIOW		MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
+#define GPIO49_nPWE		MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
+#define GPIO48_nPOE		MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
+#define GPIO57_nIOIS16		MFP_CFG_IN(GPIO57, AF1)
+#define GPIO56_nPWAIT		MFP_CFG_IN(GPIO56, AF1)
+#define GPIO79_PSKTSEL		MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH)
+#define GPIO104_PSKTSEL		MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH)
+
+/* I2C */
+#define GPIO117_I2C_SCL		MFP_CFG_IN(GPIO117, AF1)
+#define GPIO118_I2C_SDA		MFP_CFG_IN(GPIO118, AF1)
+
+/* FFUART */
+#define GPIO9_FFUART_CTS	MFP_CFG_IN(GPIO9, AF3)
+#define GPIO26_FFUART_CTS	MFP_CFG_IN(GPIO26, AF3)
+#define GPIO35_FFUART_CTS	MFP_CFG_IN(GPIO35, AF1)
+#define GPIO100_FFUART_CTS	MFP_CFG_IN(GPIO100, AF3)
+#define GPIO10_FFUART_DCD	MFP_CFG_IN(GPIO10, AF1)
+#define GPIO36_FFUART_DCD	MFP_CFG_IN(GPIO36, AF1)
+#define GPIO33_FFUART_DSR	MFP_CFG_IN(GPIO33, AF2)
+#define GPIO37_FFUART_DSR	MFP_CFG_IN(GPIO37, AF1)
+#define GPIO38_FFUART_RI	MFP_CFG_IN(GPIO38, AF1)
+#define GPIO89_FFUART_RI	MFP_CFG_IN(GPIO89, AF3)
+#define GPIO19_FFUART_RXD	MFP_CFG_IN(GPIO19, AF3)
+#define GPIO33_FFUART_RXD	MFP_CFG_IN(GPIO33, AF1)
+#define GPIO34_FFUART_RXD	MFP_CFG_IN(GPIO34, AF1)
+#define GPIO41_FFUART_RXD	MFP_CFG_IN(GPIO41, AF1)
+#define GPIO53_FFUART_RXD	MFP_CFG_IN(GPIO53, AF1)
+#define GPIO85_FFUART_RXD	MFP_CFG_IN(GPIO85, AF1)
+#define GPIO96_FFUART_RXD	MFP_CFG_IN(GPIO96, AF3)
+#define GPIO102_FFUART_RXD	MFP_CFG_IN(GPIO102, AF3)
+#define GPIO16_FFUART_TXD	MFP_CFG_OUT(GPIO16, AF3, DRIVE_HIGH)
+#define GPIO37_FFUART_TXD	MFP_CFG_OUT(GPIO37, AF3, DRIVE_HIGH)
+#define GPIO39_FFUART_TXD	MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
+#define GPIO83_FFUART_TXD	MFP_CFG_OUT(GPIO83, AF2, DRIVE_HIGH)
+#define GPIO99_FFUART_TXD	MFP_CFG_OUT(GPIO99, AF3, DRIVE_HIGH)
+#define GPIO27_FFUART_RTS	MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH)
+#define GPIO41_FFUART_RTS	MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
+#define GPIO83_FFUART_RTS	MFP_CFG_OUT(GPIO83, AF3, DRIVE_HIGH)
+#define GPIO98_FFUART_RTS	MFP_CFG_OUT(GPIO98, AF3, DRIVE_HIGH)
+#define GPIO40_FFUART_DTR	MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
+#define GPIO82_FFUART_DTR	MFP_CFG_OUT(GPIO82, AF3, DRIVE_HIGH)
+
+/* BTUART */
+#define GPIO44_BTUART_CTS	MFP_CFG_IN(GPIO44, AF1)
+#define GPIO42_BTUART_RXD	MFP_CFG_IN(GPIO42, AF1)
+#define GPIO45_BTUART_RTS	MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
+#define GPIO43_BTUART_TXD	MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
+
+/* STUART */
+#define GPIO46_STUART_RXD	MFP_CFG_IN(GPIO46, AF2)
+#define GPIO47_STUART_TXD	MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
+
+/* FICP */
+#define GPIO42_FICP_RXD		MFP_CFG_IN(GPIO42, AF2)
+#define GPIO46_FICP_RXD		MFP_CFG_IN(GPIO46, AF1)
+#define GPIO43_FICP_TXD		MFP_CFG_OUT(GPIO43, AF1, DRIVE_HIGH)
+#define GPIO47_FICP_TXD		MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
+
+/* PWM 0/1/2/3 */
+#define GPIO11_PWM2_OUT		MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW)
+#define GPIO12_PWM3_OUT		MFP_CFG_OUT(GPIO12, AF2, DRIVE_LOW)
+#define GPIO16_PWM0_OUT		MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
+#define GPIO17_PWM1_OUT		MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
+#define GPIO38_PWM1_OUT		MFP_CFG_OUT(GPIO38, AF3, DRIVE_LOW)
+#define GPIO46_PWM2_OUT		MFP_CFG_OUT(GPIO46, AF2, DRIVE_LOW)
+#define GPIO47_PWM3_OUT		MFP_CFG_OUT(GPIO47, AF3, DRIVE_LOW)
+#define GPIO79_PWM2_OUT		MFP_CFG_OUT(GPIO79, AF3, DRIVE_LOW)
+#define GPIO80_PWM3_OUT		MFP_CFG_OUT(GPIO80, AF3, DRIVE_LOW)
+#define GPIO115_PWM1_OUT	MFP_CFG_OUT(GPIO115, AF3, DRIVE_LOW)
+
+/* AC97 */
+#define GPIO31_AC97_SYNC	MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
+#define GPIO94_AC97_SYNC	MFP_CFG_OUT(GPIO94, AF1, DRIVE_LOW)
+#define GPIO30_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
+#define GPIO93_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO93, AF1, DRIVE_LOW)
+#define GPIO45_AC97_SYSCLK	MFP_CFG_OUT(GPIO45, AF1, DRIVE_LOW)
+#define GPIO89_AC97_SYSCLK	MFP_CFG_OUT(GPIO89, AF1, DRIVE_LOW)
+#define GPIO98_AC97_SYSCLK	MFP_CFG_OUT(GPIO98, AF1, DRIVE_LOW)
+#define GPIO95_AC97_nRESET	MFP_CFG_OUT(GPIO95, AF1, DRIVE_LOW)
+#define GPIO113_AC97_nRESET	MFP_CFG_OUT(GPIO113, AF2, DRIVE_LOW)
+#define GPIO28_AC97_BITCLK	MFP_CFG_IN(GPIO28, AF1)
+#define GPIO29_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO29, AF1)
+#define GPIO116_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO116, AF2)
+#define GPIO99_AC97_SDATA_IN_1	MFP_CFG_IN(GPIO99, AF2)
+
+/* I2S */
+#define GPIO28_I2S_BITCLK_IN	MFP_CFG_IN(GPIO28, AF2)
+#define GPIO28_I2S_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
+#define GPIO29_I2S_SDATA_IN	MFP_CFG_IN(GPIO29, AF2)
+#define GPIO30_I2S_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
+#define GPIO31_I2S_SYNC		MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
+#define GPIO113_I2S_SYSCLK	MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW)
+
+/* SSP 1 */
+#define GPIO23_SSP1_SCLK	MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
+#define GPIO29_SSP1_SCLK	MFP_CFG_IN(GPIO29, AF3)
+#define GPIO27_SSP1_SYSCLK	MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW)
+#define GPIO53_SSP1_SYSCLK	MFP_CFG_OUT(GPIO53, AF3, DRIVE_LOW)
+#define GPIO24_SSP1_SFRM	MFP_CFG_IN(GPIO24, AF2)
+#define GPIO28_SSP1_SFRM	MFP_CFG_IN(GPIO28, AF3)
+#define GPIO25_SSP1_TXD		MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
+#define GPIO57_SSP1_TXD		MFP_CFG_OUT(GPIO57, AF3, DRIVE_LOW)
+#define GPIO26_SSP1_RXD		MFP_CFG_IN(GPIO26, AF1)
+#define GPIO27_SSP1_SCLKEN	MFP_CFG_IN(GPIO27, AF2)
+
+/* SSP 2 */
+#define GPIO19_SSP2_SCLK	MFP_CFG_IN(GPIO19, AF1)
+#define GPIO22_SSP2_SCLK	MFP_CFG_IN(GPIO22, AF3)
+#define GPIO29_SSP2_SCLK	MFP_CFG_OUT(GPIO29, AF3, DRIVE_LOW)
+#define GPIO36_SSP2_SCLK	MFP_CFG_IN(GPIO36, AF2)
+#define GPIO50_SSP2_SCLK	MFP_CFG_IN(GPIO50, AF3)
+#define GPIO22_SSP2_SYSCLK	MFP_CFG_OUT(GPIO22, AF2, DRIVE_LOW)
+#define GPIO14_SSP2_SFRM	MFP_CFG_IN(GPIO14, AF2)
+#define GPIO37_SSP2_SFRM	MFP_CFG_IN(GPIO37, AF2)
+#define GPIO87_SSP2_SFRM	MFP_CFG_OUT(GPIO87, AF3, DRIVE_LOW)
+#define GPIO88_SSP2_SFRM	MFP_CFG_IN(GPIO88, AF3)
+#define GPIO13_SSP2_TXD		MFP_CFG_OUT(GPIO13, AF1, DRIVE_LOW)
+#define GPIO38_SSP2_TXD		MFP_CFG_OUT(GPIO38, AF2, DRIVE_LOW)
+#define GPIO87_SSP2_TXD		MFP_CFG_OUT(GPIO87, AF1, DRIVE_LOW)
+#define GPIO89_SSP2_TXD		MFP_CFG_OUT(GPIO89, AF3, DRIVE_LOW)
+#define GPIO11_SSP2_RXD		MFP_CFG_IN(GPIO11, AF2)
+#define GPIO29_SSP2_RXD		MFP_CFG_OUT(GPIO29, AF1, DRIVE_LOW)
+#define GPIO40_SSP2_RXD		MFP_CFG_IN(GPIO40, AF1)
+#define GPIO86_SSP2_RXD		MFP_CFG_IN(GPIO86, AF1)
+#define GPIO88_SSP2_RXD		MFP_CFG_IN(GPIO88, AF2)
+#define GPIO22_SSP2_EXTCLK	MFP_CFG_IN(GPIO22, AF1)
+#define GPIO27_SSP2_EXTCLK	MFP_CFG_IN(GPIO27, AF1)
+#define GPIO22_SSP2_SCLKEN	MFP_CFG_IN(GPIO22, AF2)
+#define GPIO23_SSP2_SCLKEN	MFP_CFG_IN(GPIO23, AF2)
+
+/* SSP 3 */
+#define GPIO34_SSP3_SCLK	MFP_CFG_IN(GPIO34, AF3)
+#define GPIO40_SSP3_SCLK	MFP_CFG_OUT(GPIO40, AF3, DRIVE_LOW)
+#define GPIO52_SSP3_SCLK	MFP_CFG_IN(GPIO52, AF2)
+#define GPIO84_SSP3_SCLK	MFP_CFG_IN(GPIO84, AF1)
+#define GPIO45_SSP3_SYSCLK	MFP_CFG_OUT(GPIO45, AF3, DRIVE_LOW)
+#define GPIO35_SSP3_SFRM	MFP_CFG_IN(GPIO35, AF3)
+#define GPIO39_SSP3_SFRM	MFP_CFG_IN(GPIO39, AF3)
+#define GPIO83_SSP3_SFRM	MFP_CFG_IN(GPIO83, AF1)
+#define GPIO35_SSP3_TXD		MFP_CFG_OUT(GPIO35, AF3, DRIVE_LOW)
+#define GPIO38_SSP3_TXD		MFP_CFG_OUT(GPIO38, AF1, DRIVE_LOW)
+#define GPIO81_SSP3_TXD		MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
+#define GPIO41_SSP3_RXD		MFP_CFG_IN(GPIO41, AF3)
+#define GPIO82_SSP3_RXD		MFP_CFG_IN(GPIO82, AF1)
+#define GPIO89_SSP3_RXD		MFP_CFG_IN(GPIO89, AF1)
+
+/* MMC */
+#define GPIO32_MMC_CLK		MFP_CFG_OUT(GPIO32, AF2, DRIVE_LOW)
+#define GPIO92_MMC_DAT_0	MFP_CFG_IN(GPIO92, AF1)
+#define GPIO109_MMC_DAT_1	MFP_CFG_IN(GPIO109, AF1)
+#define GPIO110_MMC_DAT_2	MFP_CFG_IN(GPIO110, AF1)
+#define GPIO111_MMC_DAT_3	MFP_CFG_IN(GPIO111, AF1)
+#define GPIO112_MMC_CMD		MFP_CFG_IN(GPIO112, AF1)
+
+/* LCD */
+#define GPIO58_LCD_LDD_0	MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
+#define GPIO59_LCD_LDD_1	MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
+#define GPIO60_LCD_LDD_2	MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
+#define GPIO61_LCD_LDD_3	MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
+#define GPIO62_LCD_LDD_4	MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
+#define GPIO63_LCD_LDD_5	MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
+#define GPIO64_LCD_LDD_6	MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
+#define GPIO65_LCD_LDD_7	MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
+#define GPIO66_LCD_LDD_8	MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
+#define GPIO67_LCD_LDD_9	MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
+#define GPIO68_LCD_LDD_10	MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
+#define GPIO69_LCD_LDD_11	MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
+#define GPIO70_LCD_LDD_12	MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
+#define GPIO71_LCD_LDD_13	MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
+#define GPIO72_LCD_LDD_14	MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
+#define GPIO73_LCD_LDD_15	MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
+#define GPIO86_LCD_LDD_16	MFP_CFG_OUT(GPIO86, AF2, DRIVE_LOW)
+#define GPIO87_LCD_LDD_17	MFP_CFG_OUT(GPIO87, AF2, DRIVE_LOW)
+#define GPIO74_LCD_FCLK		MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
+#define GPIO75_LCD_LCLK		MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
+#define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
+#define GPIO77_LCD_BIAS		MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+#define GPIO14_LCD_VSYNC	MFP_CFG_IN(GPIO14, AF1)
+#define GPIO19_LCD_CS		MFP_CFG_OUT(GPIO19, AF2, DRIVE_LOW)
+
+/* Keypad */
+#define GPIO93_KP_DKIN_0	MFP_CFG_IN(GPIO93, AF1)
+#define GPIO94_KP_DKIN_1	MFP_CFG_IN(GPIO94, AF1)
+#define GPIO95_KP_DKIN_2	MFP_CFG_IN(GPIO95, AF1)
+#define GPIO96_KP_DKIN_3	MFP_CFG_IN(GPIO96, AF1)
+#define GPIO97_KP_DKIN_4	MFP_CFG_IN(GPIO97, AF1)
+#define GPIO98_KP_DKIN_5	MFP_CFG_IN(GPIO98, AF1)
+#define GPIO99_KP_DKIN_6	MFP_CFG_IN(GPIO99, AF1)
+#define GPIO13_KP_KDIN_7	MFP_CFG_IN(GPIO13, AF2)
+#define GPIO100_KP_MKIN_0	MFP_CFG_IN(GPIO100, AF1)
+#define GPIO101_KP_MKIN_1	MFP_CFG_IN(GPIO101, AF1)
+#define GPIO102_KP_MKIN_2	MFP_CFG_IN(GPIO102, AF1)
+#define GPIO34_KP_MKIN_3	MFP_CFG_IN(GPIO34, AF2)
+#define GPIO37_KP_MKIN_3	MFP_CFG_IN(GPIO37, AF3)
+#define GPIO97_KP_MKIN_3	MFP_CFG_IN(GPIO97, AF3)
+#define GPIO98_KP_MKIN_4	MFP_CFG_IN(GPIO98, AF3)
+#define GPIO38_KP_MKIN_4	MFP_CFG_IN(GPIO38, AF2)
+#define GPIO39_KP_MKIN_4	MFP_CFG_IN(GPIO39, AF1)
+#define GPIO16_KP_MKIN_5	MFP_CFG_IN(GPIO16, AF1)
+#define GPIO90_KP_MKIN_5	MFP_CFG_IN(GPIO90, AF1)
+#define GPIO99_KP_MKIN_5	MFP_CFG_IN(GPIO99, AF3)
+#define GPIO17_KP_MKIN_6	MFP_CFG_IN(GPIO17, AF1)
+#define GPIO91_KP_MKIN_6	MFP_CFG_IN(GPIO91, AF1)
+#define GPIO95_KP_MKIN_6	MFP_CFG_IN(GPIO95, AF3)
+#define GPIO13_KP_MKIN_7	MFP_CFG_IN(GPIO13, AF3)
+#define GPIO36_KP_MKIN_7	MFP_CFG_IN(GPIO36, AF3)
+#define GPIO103_KP_MKOUT_0	MFP_CFG_OUT(GPIO103, AF2, DRIVE_HIGH)
+#define GPIO104_KP_MKOUT_1	MFP_CFG_OUT(GPIO104, AF2, DRIVE_HIGH)
+#define GPIO105_KP_MKOUT_2	MFP_CFG_OUT(GPIO105, AF2, DRIVE_HIGH)
+#define GPIO106_KP_MKOUT_3	MFP_CFG_OUT(GPIO106, AF2, DRIVE_HIGH)
+#define GPIO107_KP_MKOUT_4	MFP_CFG_OUT(GPIO107, AF2, DRIVE_HIGH)
+#define GPIO108_KP_MKOUT_5	MFP_CFG_OUT(GPIO108, AF2, DRIVE_HIGH)
+#define GPIO35_KP_MKOUT_6	MFP_CFG_OUT(GPIO35, AF2, DRIVE_HIGH)
+#define GPIO22_KP_MKOUT_7	MFP_CFG_OUT(GPIO22, AF1, DRIVE_HIGH)
+#define GPIO40_KP_MKOUT_6	MFP_CFG_OUT(GPIO40, AF1, DRIVE_HIGH)
+#define GPIO41_KP_MKOUT_7	MFP_CFG_OUT(GPIO41, AF1, DRIVE_HIGH)
+#define GPIO96_KP_MKOUT_6	MFP_CFG_OUT(GPIO96, AF3, DRIVE_HIGH)
+
+/* USB P3 */
+#define GPIO10_USB_P3_5		MFP_CFG_IN(GPIO10, AF3)
+#define GPIO11_USB_P3_1		MFP_CFG_IN(GPIO11, AF3)
+#define GPIO30_USB_P3_2		MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
+#define GPIO31_USB_P3_6		MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
+#define GPIO56_USB_P3_4		MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
+#define GPIO86_USB_P3_5		MFP_CFG_IN(GPIO86, AF3)
+#define GPIO87_USB_P3_1		MFP_CFG_IN(GPIO87, AF3)
+#define GPIO90_USB_P3_5		MFP_CFG_IN(GPIO90, AF2)
+#define GPIO91_USB_P3_1		MFP_CFG_IN(GPIO91, AF2)
+#define GPIO113_USB_P3_3	MFP_CFG_IN(GPIO113, AF3)
+
+/* USB P2 */
+#define GPIO34_USB_P2_2		MFP_CFG_OUT(GPIO34, AF1, DRIVE_LOW)
+#define GPIO35_USB_P2_1		MFP_CFG_IN(GPIO35, AF2)
+#define GPIO36_USB_P2_4		MFP_CFG_OUT(GPIO36, AF1, DRIVE_LOW)
+#define GPIO37_USB_P2_8		MFP_CFG_OUT(GPIO37, AF1, DRIVE_LOW)
+#define GPIO38_USB_P2_3		MFP_CFG_IN(GPIO38, AF3)
+#define GPIO39_USB_P2_6		MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
+#define GPIO40_USB_P2_5		MFP_CFG_IN(GPIO40, AF3)
+#define GPIO41_USB_P2_7		MFP_CFG_IN(GPIO41, AF2)
+#define GPIO53_USB_P2_3		MFP_CFG_IN(GPIO53, AF2)
+
+/* USB Host Port 1/2 */
+#define GPIO88_USBH1_PWR	MFP_CFG_IN(GPIO88, AF1)
+#define GPIO89_USBH1_PEN	MFP_CFG_OUT(GPIO89, AF2, DRIVE_LOW)
+#define GPIO119_USBH2_PWR	MFP_CFG_IN(GPIO119, AF1)
+#define GPIO120_USBH2_PEN	MFP_CFG_OUT(GPIO120, AF2, DRIVE_LOW)
+
+/* QCI - default to Master Mode: CIF_FV/CIF_LV Direction In */
+#define GPIO115_CIF_DD_3	MFP_CFG_IN(GPIO115, AF2)
+#define GPIO116_CIF_DD_2	MFP_CFG_IN(GPIO116, AF1)
+#define GPIO12_CIF_DD_7		MFP_CFG_IN(GPIO12, AF2)
+#define GPIO17_CIF_DD_6		MFP_CFG_IN(GPIO17, AF2)
+#define GPIO23_CIF_MCLK		MFP_CFG_OUT(GPIO23, AF1, DRIVE_LOW)
+#define GPIO24_CIF_FV		MFP_CFG_IN(GPIO24, AF1)
+#define GPIO25_CIF_LV		MFP_CFG_IN(GPIO25, AF1)
+#define GPIO26_CIF_PCLK		MFP_CFG_IN(GPIO26, AF2)
+#define GPIO27_CIF_DD_0		MFP_CFG_IN(GPIO27, AF3)
+#define GPIO42_CIF_MCLK		MFP_CFG_OUT(GPIO42, AF3, DRIVE_LOW)
+#define GPIO43_CIF_FV		MFP_CFG_IN(GPIO43, AF3)
+#define GPIO44_CIF_LV		MFP_CFG_IN(GPIO44, AF3)
+#define GPIO45_CIF_PCLK		MFP_CFG_IN(GPIO45, AF3)
+#define GPIO47_CIF_DD_0		MFP_CFG_IN(GPIO47, AF1)
+#define GPIO48_CIF_DD_5		MFP_CFG_IN(GPIO48, AF1)
+#define GPIO50_CIF_DD_3		MFP_CFG_IN(GPIO50, AF1)
+#define GPIO51_CIF_DD_2		MFP_CFG_IN(GPIO51, AF1)
+#define GPIO52_CIF_DD_4		MFP_CFG_IN(GPIO52, AF1)
+#define GPIO53_CIF_MCLK		MFP_CFG_OUT(GPIO53, AF2, DRIVE_LOW)
+#define GPIO54_CIF_PCLK		MFP_CFG_IN(GPIO54, AF3)
+#define GPIO55_CIF_DD_1		MFP_CFG_IN(GPIO55, AF1)
+#define GPIO81_CIF_DD_0		MFP_CFG_IN(GPIO81, AF2)
+#define GPIO82_CIF_DD_5		MFP_CFG_IN(GPIO82, AF3)
+#define GPIO83_CIF_DD_4		MFP_CFG_IN(GPIO83, AF3)
+#define GPIO84_CIF_FV		MFP_CFG_IN(GPIO84, AF3)
+#define GPIO85_CIF_LV		MFP_CFG_IN(GPIO85, AF3)
+#define GPIO90_CIF_DD_4		MFP_CFG_IN(GPIO90, AF3)
+#define GPIO91_CIF_DD_5		MFP_CFG_IN(GPIO91, AF3)
+#define GPIO93_CIF_DD_6		MFP_CFG_IN(GPIO93, AF2)
+#define GPIO94_CIF_DD_5		MFP_CFG_IN(GPIO94, AF2)
+#define GPIO95_CIF_DD_4		MFP_CFG_IN(GPIO95, AF2)
+#define GPIO98_CIF_DD_0		MFP_CFG_IN(GPIO98, AF2)
+#define GPIO103_CIF_DD_3	MFP_CFG_IN(GPIO103, AF1)
+#define GPIO104_CIF_DD_2	MFP_CFG_IN(GPIO104, AF1)
+#define GPIO105_CIF_DD_1	MFP_CFG_IN(GPIO105, AF1)
+#define GPIO106_CIF_DD_9	MFP_CFG_IN(GPIO106, AF1)
+#define GPIO107_CIF_DD_8	MFP_CFG_IN(GPIO107, AF1)
+#define GPIO108_CIF_DD_7	MFP_CFG_IN(GPIO108, AF1)
+#define GPIO114_CIF_DD_1	MFP_CFG_IN(GPIO114, AF1)
+
+/* Universal Subscriber ID Interface */
+#define GPIO114_UVS0		MFP_CFG_OUT(GPIO114, AF2, DRIVE_LOW)
+#define GPIO115_nUVS1		MFP_CFG_OUT(GPIO115, AF2, DRIVE_LOW)
+#define GPIO116_nUVS2		MFP_CFG_OUT(GPIO116, AF2, DRIVE_LOW)
+#define GPIO14_UCLK		MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW)
+#define GPIO91_UCLK		MFP_CFG_OUT(GPIO91, AF2, DRIVE_LOW)
+#define GPIO19_nURST		MFP_CFG_OUT(GPIO19, AF3, DRIVE_LOW)
+#define GPIO90_nURST		MFP_CFG_OUT(GPIO90, AF2, DRIVE_LOW)
+#define GPIO116_UDET		MFP_CFG_IN(GPIO116, AF3)
+#define GPIO114_UEN		MFP_CFG_OUT(GPIO114, AF1, DRIVE_LOW)
+#define GPIO115_UEN		MFP_CFG_OUT(GPIO115, AF1, DRIVE_LOW)
+
+/* Mobile Scalable Link (MSL) Interface */
+#define GPIO81_BB_OB_DAT_0	MFP_CFG_OUT(GPIO81, AF2, DRIVE_LOW)
+#define GPIO48_BB_OB_DAT_1	MFP_CFG_OUT(GPIO48, AF1, DRIVE_LOW)
+#define GPIO50_BB_OB_DAT_2	MFP_CFG_OUT(GPIO50, AF1, DRIVE_LOW)
+#define GPIO51_BB_OB_DAT_3	MFP_CFG_OUT(GPIO51, AF1, DRIVE_LOW)
+#define GPIO52_BB_OB_CLK	MFP_CFG_OUT(GPIO52, AF1, DRIVE_LOW)
+#define GPIO53_BB_OB_STB	MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
+#define GPIO54_BB_OB_WAIT	MFP_CFG_IN(GPIO54, AF2)
+#define GPIO82_BB_IB_DAT_0	MFP_CFG_IN(GPIO82, AF2)
+#define GPIO55_BB_IB_DAT_1	MFP_CFG_IN(GPIO55, AF2)
+#define GPIO56_BB_IB_DAT_2	MFP_CFG_IN(GPIO56, AF2)
+#define GPIO57_BB_IB_DAT_3	MFP_CFG_IN(GPIO57, AF2)
+#define GPIO83_BB_IB_CLK	MFP_CFG_IN(GPIO83, AF2)
+#define GPIO84_BB_IB_STB	MFP_CFG_IN(GPIO84, AF2)
+#define GPIO85_BB_IB_WAIT	MFP_CFG_OUT(GPIO85, AF2, DRIVE_LOW)
+
+/* Memory Stick Host Controller */
+#define GPIO92_MSBS		MFP_CFG_OUT(GPIO92, AF2, DRIVE_LOW)
+#define GPIO109_MSSDIO		MFP_CFG_IN(GPIO109, AF2)
+#define GPIO112_nMSINS		MFP_CFG_IN(GPIO112, AF2)
+#define GPIO32_MSSCLK		MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
+
+extern int keypad_set_wake(unsigned int on);
+#endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
new file mode 100644
index 0000000..3e92115
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
@@ -0,0 +1,133 @@
+#ifndef __ASM_ARCH_MFP_PXA2XX_H
+#define __ASM_ARCH_MFP_PXA2XX_H
+
+#include <mach/mfp.h>
+
+/*
+ * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
+ *
+ *  MFP_PIN(x)
+ *  MFP_AFx
+ *  MFP_LPM_DRIVE_{LOW, HIGH}
+ *  MFP_LPM_EDGE_x
+ *
+ * other MFP_x bit definitions will be ignored
+ *
+ * and adds the below two bits specifically for pxa2xx:
+ *
+ * bit     23 - Input/Output (PXA2xx specific)
+ * bit     24 - Wakeup Enable(PXA2xx specific)
+ */
+
+#define MFP_DIR_IN		(0x0 << 23)
+#define MFP_DIR_OUT		(0x1 << 23)
+#define MFP_DIR_MASK		(0x1 << 23)
+#define MFP_DIR(x)		(((x) >> 23) & 0x1)
+
+#define MFP_LPM_CAN_WAKEUP	(0x1 << 24)
+#define WAKEUP_ON_EDGE_RISE	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
+#define WAKEUP_ON_EDGE_FALL	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL)
+#define WAKEUP_ON_EDGE_BOTH	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH)
+
+/* specifically for enabling wakeup on keypad GPIOs */
+#define WAKEUP_ON_LEVEL_HIGH	(MFP_LPM_CAN_WAKEUP)
+
+#define MFP_CFG_IN(pin, af)		\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_IN))
+
+/* NOTE:  pins configured as output _must_ provide a low power state,
+ * and this state should help to minimize the power dissipation.
+ */
+#define MFP_CFG_OUT(pin, af, state)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
+
+/* Common configurations for pxa25x and pxa27x
+ *
+ * Note: pins configured as GPIO are always initialized to input
+ * so not to cause any side effect
+ */
+#define GPIO0_GPIO	MFP_CFG_IN(GPIO0, AF0)
+#define GPIO1_GPIO	MFP_CFG_IN(GPIO1, AF0)
+#define GPIO9_GPIO	MFP_CFG_IN(GPIO9, AF0)
+#define GPIO10_GPIO	MFP_CFG_IN(GPIO10, AF0)
+#define GPIO11_GPIO	MFP_CFG_IN(GPIO11, AF0)
+#define GPIO12_GPIO	MFP_CFG_IN(GPIO12, AF0)
+#define GPIO13_GPIO	MFP_CFG_IN(GPIO13, AF0)
+#define GPIO14_GPIO	MFP_CFG_IN(GPIO14, AF0)
+#define GPIO15_GPIO	MFP_CFG_IN(GPIO15, AF0)
+#define GPIO16_GPIO	MFP_CFG_IN(GPIO16, AF0)
+#define GPIO17_GPIO	MFP_CFG_IN(GPIO17, AF0)
+#define GPIO18_GPIO	MFP_CFG_IN(GPIO18, AF0)
+#define GPIO19_GPIO	MFP_CFG_IN(GPIO19, AF0)
+#define GPIO20_GPIO	MFP_CFG_IN(GPIO20, AF0)
+#define GPIO21_GPIO	MFP_CFG_IN(GPIO21, AF0)
+#define GPIO22_GPIO	MFP_CFG_IN(GPIO22, AF0)
+#define GPIO23_GPIO	MFP_CFG_IN(GPIO23, AF0)
+#define GPIO24_GPIO	MFP_CFG_IN(GPIO24, AF0)
+#define GPIO25_GPIO	MFP_CFG_IN(GPIO25, AF0)
+#define GPIO26_GPIO	MFP_CFG_IN(GPIO26, AF0)
+#define GPIO27_GPIO	MFP_CFG_IN(GPIO27, AF0)
+#define GPIO28_GPIO	MFP_CFG_IN(GPIO28, AF0)
+#define GPIO29_GPIO	MFP_CFG_IN(GPIO29, AF0)
+#define GPIO30_GPIO	MFP_CFG_IN(GPIO30, AF0)
+#define GPIO31_GPIO	MFP_CFG_IN(GPIO31, AF0)
+#define GPIO32_GPIO	MFP_CFG_IN(GPIO32, AF0)
+#define GPIO33_GPIO	MFP_CFG_IN(GPIO33, AF0)
+#define GPIO34_GPIO	MFP_CFG_IN(GPIO34, AF0)
+#define GPIO35_GPIO	MFP_CFG_IN(GPIO35, AF0)
+#define GPIO36_GPIO	MFP_CFG_IN(GPIO36, AF0)
+#define GPIO37_GPIO	MFP_CFG_IN(GPIO37, AF0)
+#define GPIO38_GPIO	MFP_CFG_IN(GPIO38, AF0)
+#define GPIO39_GPIO	MFP_CFG_IN(GPIO39, AF0)
+#define GPIO40_GPIO	MFP_CFG_IN(GPIO40, AF0)
+#define GPIO41_GPIO	MFP_CFG_IN(GPIO41, AF0)
+#define GPIO42_GPIO	MFP_CFG_IN(GPIO42, AF0)
+#define GPIO43_GPIO	MFP_CFG_IN(GPIO43, AF0)
+#define GPIO44_GPIO	MFP_CFG_IN(GPIO44, AF0)
+#define GPIO45_GPIO	MFP_CFG_IN(GPIO45, AF0)
+#define GPIO46_GPIO	MFP_CFG_IN(GPIO46, AF0)
+#define GPIO47_GPIO	MFP_CFG_IN(GPIO47, AF0)
+#define GPIO48_GPIO	MFP_CFG_IN(GPIO48, AF0)
+#define GPIO49_GPIO	MFP_CFG_IN(GPIO49, AF0)
+#define GPIO50_GPIO	MFP_CFG_IN(GPIO50, AF0)
+#define GPIO51_GPIO	MFP_CFG_IN(GPIO51, AF0)
+#define GPIO52_GPIO	MFP_CFG_IN(GPIO52, AF0)
+#define GPIO53_GPIO	MFP_CFG_IN(GPIO53, AF0)
+#define GPIO54_GPIO	MFP_CFG_IN(GPIO54, AF0)
+#define GPIO55_GPIO	MFP_CFG_IN(GPIO55, AF0)
+#define GPIO56_GPIO	MFP_CFG_IN(GPIO56, AF0)
+#define GPIO57_GPIO	MFP_CFG_IN(GPIO57, AF0)
+#define GPIO58_GPIO	MFP_CFG_IN(GPIO58, AF0)
+#define GPIO59_GPIO	MFP_CFG_IN(GPIO59, AF0)
+#define GPIO60_GPIO	MFP_CFG_IN(GPIO60, AF0)
+#define GPIO61_GPIO	MFP_CFG_IN(GPIO61, AF0)
+#define GPIO62_GPIO	MFP_CFG_IN(GPIO62, AF0)
+#define GPIO63_GPIO	MFP_CFG_IN(GPIO63, AF0)
+#define GPIO64_GPIO	MFP_CFG_IN(GPIO64, AF0)
+#define GPIO65_GPIO	MFP_CFG_IN(GPIO65, AF0)
+#define GPIO66_GPIO	MFP_CFG_IN(GPIO66, AF0)
+#define GPIO67_GPIO	MFP_CFG_IN(GPIO67, AF0)
+#define GPIO68_GPIO	MFP_CFG_IN(GPIO68, AF0)
+#define GPIO69_GPIO	MFP_CFG_IN(GPIO69, AF0)
+#define GPIO70_GPIO	MFP_CFG_IN(GPIO70, AF0)
+#define GPIO71_GPIO	MFP_CFG_IN(GPIO71, AF0)
+#define GPIO72_GPIO	MFP_CFG_IN(GPIO72, AF0)
+#define GPIO73_GPIO	MFP_CFG_IN(GPIO73, AF0)
+#define GPIO74_GPIO	MFP_CFG_IN(GPIO74, AF0)
+#define GPIO75_GPIO	MFP_CFG_IN(GPIO75, AF0)
+#define GPIO76_GPIO	MFP_CFG_IN(GPIO76, AF0)
+#define GPIO77_GPIO	MFP_CFG_IN(GPIO77, AF0)
+#define GPIO78_GPIO	MFP_CFG_IN(GPIO78, AF0)
+#define GPIO79_GPIO	MFP_CFG_IN(GPIO79, AF0)
+#define GPIO80_GPIO	MFP_CFG_IN(GPIO80, AF0)
+#define GPIO81_GPIO	MFP_CFG_IN(GPIO81, AF0)
+#define GPIO82_GPIO	MFP_CFG_IN(GPIO82, AF0)
+#define GPIO83_GPIO	MFP_CFG_IN(GPIO83, AF0)
+#define GPIO84_GPIO	MFP_CFG_IN(GPIO84, AF0)
+
+extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num);
+extern void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm);
+extern int gpio_set_wake(unsigned int gpio, unsigned int on);
+#endif /* __ASM_ARCH_MFP_PXA2XX_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
new file mode 100644
index 0000000..bc1fb33
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
@@ -0,0 +1,575 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+ *
+ * PXA300/PXA310 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ *             initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA300_H
+#define __ASM_ARCH_MFP_PXA300_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+
+/* GPIO */
+#define GPIO46_GPIO		MFP_CFG(GPIO46, AF1)
+#define GPIO49_GPIO		MFP_CFG(GPIO49, AF3)
+#define GPIO50_GPIO		MFP_CFG(GPIO50, AF2)
+#define GPIO51_GPIO		MFP_CFG(GPIO51, AF3)
+#define GPIO52_GPIO		MFP_CFG(GPIO52, AF3)
+#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
+#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
+
+#ifdef CONFIG_CPU_PXA310
+#define GPIO7_2_GPIO		MFP_CFG(GPIO7_2, AF0)
+#define GPIO8_2_GPIO		MFP_CFG(GPIO8_2, AF0)
+#define GPIO9_2_GPIO		MFP_CFG(GPIO9_2, AF0)
+#define GPIO10_2_GPIO		MFP_CFG(GPIO10_2, AF0)
+#define GPIO11_2_GPIO		MFP_CFG(GPIO11_2, AF0)
+#define GPIO12_2_GPIO		MFP_CFG(GPIO12_2, AF0)
+#endif
+
+/* Chip Select */
+#define GPIO2_nCS3		MFP_CFG(GPIO2,  AF1)
+
+/* AC97 */
+#define GPIO23_AC97_nACRESET	MFP_CFG(GPIO23, AF1)
+#define GPIO24_AC97_SYSCLK	MFP_CFG(GPIO24, AF1)
+#define GPIO29_AC97_BITCLK	MFP_CFG(GPIO29, AF1)
+#define GPIO25_AC97_SDATA_IN_0	MFP_CFG(GPIO25, AF1)
+#define GPIO26_AC97_SDATA_IN_1	MFP_CFG(GPIO26, AF1)
+#define GPIO17_AC97_SDATA_IN_2	MFP_CFG(GPIO17, AF3)
+#define GPIO21_AC97_SDATA_IN_2	MFP_CFG(GPIO21, AF2)
+#define GPIO18_AC97_SDATA_IN_3	MFP_CFG(GPIO18, AF3)
+#define GPIO22_AC97_SDATA_IN_3	MFP_CFG(GPIO22, AF2)
+#define GPIO27_AC97_SDATA_OUT	MFP_CFG(GPIO27, AF1)
+#define GPIO28_AC97_SYNC	MFP_CFG(GPIO28, AF1)
+
+/* I2C */
+#define GPIO21_I2C_SCL		MFP_CFG_LPM(GPIO21, AF1, PULL_HIGH)
+#define GPIO22_I2C_SDA		MFP_CFG_LPM(GPIO22, AF1, PULL_HIGH)
+
+/* QCI */
+#define GPIO39_CI_DD_0		MFP_CFG_DRV(GPIO39, AF1, DS04X)
+#define GPIO40_CI_DD_1		MFP_CFG_DRV(GPIO40, AF1, DS04X)
+#define GPIO41_CI_DD_2		MFP_CFG_DRV(GPIO41, AF1, DS04X)
+#define GPIO42_CI_DD_3		MFP_CFG_DRV(GPIO42, AF1, DS04X)
+#define GPIO43_CI_DD_4		MFP_CFG_DRV(GPIO43, AF1, DS04X)
+#define GPIO44_CI_DD_5		MFP_CFG_DRV(GPIO44, AF1, DS04X)
+#define GPIO45_CI_DD_6		MFP_CFG_DRV(GPIO45, AF1, DS04X)
+#define GPIO46_CI_DD_7		MFP_CFG_DRV(GPIO46, AF0, DS04X)
+#define GPIO47_CI_DD_8		MFP_CFG_DRV(GPIO47, AF1, DS04X)
+#define GPIO48_CI_DD_9		MFP_CFG_DRV(GPIO48, AF1, DS04X)
+#define GPIO52_CI_HSYNC		MFP_CFG_DRV(GPIO52, AF0, DS04X)
+#define GPIO51_CI_VSYNC		MFP_CFG_DRV(GPIO51, AF0, DS04X)
+#define GPIO49_CI_MCLK		MFP_CFG_DRV(GPIO49, AF0, DS04X)
+#define GPIO50_CI_PCLK		MFP_CFG_DRV(GPIO50, AF0, DS04X)
+
+/* KEYPAD */
+#define GPIO3_KP_DKIN_6		MFP_CFG_LPM(GPIO3,   AF2, FLOAT)
+#define GPIO4_KP_DKIN_7		MFP_CFG_LPM(GPIO4,   AF2, FLOAT)
+#define GPIO16_KP_DKIN_6	MFP_CFG_LPM(GPIO16,  AF6, FLOAT)
+#define GPIO83_KP_DKIN_2	MFP_CFG_LPM(GPIO83,  AF5, FLOAT)
+#define GPIO84_KP_DKIN_1	MFP_CFG_LPM(GPIO84,  AF5, FLOAT)
+#define GPIO85_KP_DKIN_0	MFP_CFG_LPM(GPIO85,  AF3, FLOAT)
+#define GPIO86_KP_DKIN_1	MFP_CFG_LPM(GPIO86,  AF3, FLOAT)
+#define GPIO87_KP_DKIN_2	MFP_CFG_LPM(GPIO87,  AF3, FLOAT)
+#define GPIO88_KP_DKIN_3	MFP_CFG_LPM(GPIO88,  AF3, FLOAT)
+#define GPIO89_KP_DKIN_3	MFP_CFG_LPM(GPIO89,  AF3, FLOAT)
+#define GPIO107_KP_DKIN_0	MFP_CFG_LPM(GPIO107, AF2, FLOAT)
+#define GPIO108_KP_DKIN_1	MFP_CFG_LPM(GPIO108, AF2, FLOAT)
+#define GPIO109_KP_DKIN_2	MFP_CFG_LPM(GPIO109, AF2, FLOAT)
+#define GPIO110_KP_DKIN_3	MFP_CFG_LPM(GPIO110, AF2, FLOAT)
+#define GPIO111_KP_DKIN_4	MFP_CFG_LPM(GPIO111, AF2, FLOAT)
+#define GPIO112_KP_DKIN_5	MFP_CFG_LPM(GPIO112, AF2, FLOAT)
+#define GPIO113_KP_DKIN_6	MFP_CFG_LPM(GPIO113, AF2, FLOAT)
+#define GPIO114_KP_DKIN_7	MFP_CFG_LPM(GPIO114, AF2, FLOAT)
+#define GPIO115_KP_DKIN_0	MFP_CFG_LPM(GPIO115, AF2, FLOAT)
+#define GPIO116_KP_DKIN_1	MFP_CFG_LPM(GPIO116, AF2, FLOAT)
+#define GPIO117_KP_DKIN_2	MFP_CFG_LPM(GPIO117, AF2, FLOAT)
+#define GPIO118_KP_DKIN_3	MFP_CFG_LPM(GPIO118, AF2, FLOAT)
+#define GPIO119_KP_DKIN_4	MFP_CFG_LPM(GPIO119, AF2, FLOAT)
+#define GPIO120_KP_DKIN_5	MFP_CFG_LPM(GPIO120, AF2, FLOAT)
+#define GPIO121_KP_DKIN_6	MFP_CFG_LPM(GPIO121, AF2, FLOAT)
+#define GPIO122_KP_DKIN_5	MFP_CFG_LPM(GPIO122, AF2, FLOAT)
+#define GPIO123_KP_DKIN_4	MFP_CFG_LPM(GPIO123, AF2, FLOAT)
+#define GPIO124_KP_DKIN_3	MFP_CFG_LPM(GPIO124, AF2, FLOAT)
+#define GPIO127_KP_DKIN_0	MFP_CFG_LPM(GPIO127, AF5, FLOAT)
+#define GPIO0_2_KP_DKIN_0	MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
+#define GPIO1_2_KP_DKIN_1	MFP_CFG_LPM(GPIO1_2, AF2, FLOAT)
+#define GPIO2_2_KP_DKIN_6	MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
+#define GPIO3_2_KP_DKIN_7	MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
+#define GPIO4_2_KP_DKIN_1	MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
+#define GPIO5_2_KP_DKIN_0	MFP_CFG_LPM(GPIO5_2, AF2, FLOAT)
+
+#define GPIO5_KP_MKIN_0		MFP_CFG_LPM(GPIO5,   AF2, FLOAT)
+#define GPIO6_KP_MKIN_1		MFP_CFG_LPM(GPIO6,   AF2, FLOAT)
+#define GPIO9_KP_MKIN_6		MFP_CFG_LPM(GPIO9,   AF3, FLOAT)
+#define GPIO10_KP_MKIN_7	MFP_CFG_LPM(GPIO10,  AF3, FLOAT)
+#define GPIO70_KP_MKIN_6	MFP_CFG_LPM(GPIO70,  AF3, FLOAT)
+#define GPIO71_KP_MKIN_7	MFP_CFG_LPM(GPIO71,  AF3, FLOAT)
+#define GPIO100_KP_MKIN_6	MFP_CFG_LPM(GPIO100, AF7, FLOAT)
+#define GPIO101_KP_MKIN_7	MFP_CFG_LPM(GPIO101, AF7, FLOAT)
+#define GPIO112_KP_MKIN_6	MFP_CFG_LPM(GPIO112, AF4, FLOAT)
+#define GPIO113_KP_MKIN_7	MFP_CFG_LPM(GPIO113, AF4, FLOAT)
+#define GPIO115_KP_MKIN_0	MFP_CFG_LPM(GPIO115, AF1, FLOAT)
+#define GPIO116_KP_MKIN_1	MFP_CFG_LPM(GPIO116, AF1, FLOAT)
+#define GPIO117_KP_MKIN_2	MFP_CFG_LPM(GPIO117, AF1, FLOAT)
+#define GPIO118_KP_MKIN_3	MFP_CFG_LPM(GPIO118, AF1, FLOAT)
+#define GPIO119_KP_MKIN_4	MFP_CFG_LPM(GPIO119, AF1, FLOAT)
+#define GPIO120_KP_MKIN_5	MFP_CFG_LPM(GPIO120, AF1, FLOAT)
+#define GPIO125_KP_MKIN_2	MFP_CFG_LPM(GPIO125, AF2, FLOAT)
+#define GPIO2_2_KP_MKIN_6	MFP_CFG_LPM(GPIO2_2, AF1, FLOAT)
+#define GPIO3_2_KP_MKIN_7	MFP_CFG_LPM(GPIO3_2, AF1, FLOAT)
+
+#define GPIO7_KP_MKOUT_5	MFP_CFG_LPM(GPIO7,   AF1, DRIVE_HIGH)
+#define GPIO11_KP_MKOUT_5	MFP_CFG_LPM(GPIO11,  AF3, DRIVE_HIGH)
+#define GPIO12_KP_MKOUT_6	MFP_CFG_LPM(GPIO12,  AF3, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_7	MFP_CFG_LPM(GPIO13,  AF3, DRIVE_HIGH)
+#define GPIO19_KP_MKOUT_4	MFP_CFG_LPM(GPIO19,  AF3, DRIVE_HIGH)
+#define GPIO20_KP_MKOUT_5	MFP_CFG_LPM(GPIO20,  AF3, DRIVE_HIGH)
+#define GPIO38_KP_MKOUT_5	MFP_CFG_LPM(GPIO38,  AF5, DRIVE_HIGH)
+#define GPIO53_KP_MKOUT_6	MFP_CFG_LPM(GPIO53,  AF5, DRIVE_HIGH)
+#define GPIO78_KP_MKOUT_7	MFP_CFG_LPM(GPIO78,  AF5, DRIVE_HIGH)
+#define GPIO85_KP_MKOUT_0	MFP_CFG_LPM(GPIO85,  AF2, DRIVE_HIGH)
+#define GPIO86_KP_MKOUT_1	MFP_CFG_LPM(GPIO86,  AF2, DRIVE_HIGH)
+#define GPIO87_KP_MKOUT_2	MFP_CFG_LPM(GPIO87,  AF2, DRIVE_HIGH)
+#define GPIO88_KP_MKOUT_3	MFP_CFG_LPM(GPIO88,  AF2, DRIVE_HIGH)
+#define GPIO104_KP_MKOUT_6	MFP_CFG_LPM(GPIO104, AF5, DRIVE_HIGH)
+#define GPIO105_KP_MKOUT_7	MFP_CFG_LPM(GPIO105, AF5, DRIVE_HIGH)
+#define GPIO121_KP_MKOUT_0	MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
+#define GPIO122_KP_MKOUT_1	MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
+#define GPIO123_KP_MKOUT_2	MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
+#define GPIO124_KP_MKOUT_3	MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
+#define GPIO125_KP_MKOUT_4	MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
+#define GPIO126_KP_MKOUT_7	MFP_CFG_LPM(GPIO126, AF4, DRIVE_HIGH)
+#define GPIO5_2_KP_MKOUT_6	MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
+#define GPIO4_2_KP_MKOUT_5	MFP_CFG_LPM(GPIO4_2, AF1, DRIVE_HIGH)
+#define GPIO6_2_KP_MKOUT_7	MFP_CFG_LPM(GPIO6_2, AF1, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO54_LCD_LDD_0	MFP_CFG_DRV(GPIO54, AF1, DS01X)
+#define GPIO55_LCD_LDD_1	MFP_CFG_DRV(GPIO55, AF1, DS01X)
+#define GPIO56_LCD_LDD_2	MFP_CFG_DRV(GPIO56, AF1, DS01X)
+#define GPIO57_LCD_LDD_3	MFP_CFG_DRV(GPIO57, AF1, DS01X)
+#define GPIO58_LCD_LDD_4	MFP_CFG_DRV(GPIO58, AF1, DS01X)
+#define GPIO59_LCD_LDD_5	MFP_CFG_DRV(GPIO59, AF1, DS01X)
+#define GPIO60_LCD_LDD_6	MFP_CFG_DRV(GPIO60, AF1, DS01X)
+#define GPIO61_LCD_LDD_7	MFP_CFG_DRV(GPIO61, AF1, DS01X)
+#define GPIO62_LCD_LDD_8	MFP_CFG_DRV(GPIO62, AF1, DS01X)
+#define GPIO63_LCD_LDD_9	MFP_CFG_DRV(GPIO63, AF1, DS01X)
+#define GPIO64_LCD_LDD_10	MFP_CFG_DRV(GPIO64, AF1, DS01X)
+#define GPIO65_LCD_LDD_11	MFP_CFG_DRV(GPIO65, AF1, DS01X)
+#define GPIO66_LCD_LDD_12	MFP_CFG_DRV(GPIO66, AF1, DS01X)
+#define GPIO67_LCD_LDD_13	MFP_CFG_DRV(GPIO67, AF1, DS01X)
+#define GPIO68_LCD_LDD_14	MFP_CFG_DRV(GPIO68, AF1, DS01X)
+#define GPIO69_LCD_LDD_15	MFP_CFG_DRV(GPIO69, AF1, DS01X)
+#define GPIO70_LCD_LDD_16	MFP_CFG_DRV(GPIO70, AF1, DS01X)
+#define GPIO71_LCD_LDD_17	MFP_CFG_DRV(GPIO71, AF1, DS01X)
+#define GPIO62_LCD_CS_N		MFP_CFG_DRV(GPIO62, AF2, DS01X)
+#define GPIO72_LCD_FCLK		MFP_CFG_DRV(GPIO72, AF1, DS01X)
+#define GPIO73_LCD_LCLK		MFP_CFG_DRV(GPIO73, AF1, DS01X)
+#define GPIO74_LCD_PCLK		MFP_CFG_DRV(GPIO74, AF1, DS02X)
+#define GPIO75_LCD_BIAS		MFP_CFG_DRV(GPIO75, AF1, DS01X)
+#define GPIO76_LCD_VSYNC	MFP_CFG_DRV(GPIO76, AF2, DS01X)
+
+#define GPIO15_LCD_CS_N		MFP_CFG_DRV(GPIO15,  AF2, DS01X)
+#define GPIO127_LCD_CS_N	MFP_CFG_DRV(GPIO127, AF1, DS01X)
+#define GPIO63_LCD_VSYNC	MFP_CFG_DRV(GPIO63,  AF2, DS01X)
+
+/* Mini-LCD */
+#define GPIO72_MLCD_FCLK	MFP_CFG_DRV(GPIO72, AF7, DS08X)
+#define GPIO73_MLCD_LCLK	MFP_CFG_DRV(GPIO73, AF7, DS08X)
+#define GPIO54_MLCD_LDD_0	MFP_CFG_DRV(GPIO54, AF7, DS08X)
+#define GPIO55_MLCD_LDD_1	MFP_CFG_DRV(GPIO55, AF7, DS08X)
+#define GPIO56_MLCD_LDD_2	MFP_CFG_DRV(GPIO56, AF7, DS08X)
+#define GPIO57_MLCD_LDD_3	MFP_CFG_DRV(GPIO57, AF7, DS08X)
+#define GPIO58_MLCD_LDD_4	MFP_CFG_DRV(GPIO58, AF7, DS08X)
+#define GPIO59_MLCD_LDD_5	MFP_CFG_DRV(GPIO59, AF7, DS08X)
+#define GPIO60_MLCD_LDD_6	MFP_CFG_DRV(GPIO60, AF7, DS08X)
+#define GPIO61_MLCD_LDD_7	MFP_CFG_DRV(GPIO61, AF7, DS08X)
+#define GPIO62_MLCD_LDD_8	MFP_CFG_DRV(GPIO62, AF7, DS08X)
+#define GPIO63_MLCD_LDD_9	MFP_CFG_DRV(GPIO63, AF7, DS08X)
+#define GPIO64_MLCD_LDD_10	MFP_CFG_DRV(GPIO64, AF7, DS08X)
+#define GPIO65_MLCD_LDD_11	MFP_CFG_DRV(GPIO65, AF7, DS08X)
+#define GPIO66_MLCD_LDD_12	MFP_CFG_DRV(GPIO66, AF7, DS08X)
+#define GPIO67_MLCD_LDD_13	MFP_CFG_DRV(GPIO67, AF7, DS08X)
+#define GPIO68_MLCD_LDD_14	MFP_CFG_DRV(GPIO68, AF7, DS08X)
+#define GPIO69_MLCD_LDD_15	MFP_CFG_DRV(GPIO69, AF7, DS08X)
+#define GPIO74_MLCD_PCLK	MFP_CFG_DRV(GPIO74, AF7, DS08X)
+#define GPIO75_MLCD_BIAS	MFP_CFG_DRV(GPIO75, AF2, DS08X)
+
+/* MMC1 */
+#define GPIO7_MMC1_CLK		MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
+#define GPIO8_MMC1_CMD		MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
+#define GPIO14_MMC1_CMD		MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH)
+#define GPIO15_MMC1_CMD		MFP_CFG_LPM(GPIO15, AF5, DRIVE_HIGH)
+#define GPIO3_MMC1_DAT0		MFP_CFG_LPM(GPIO3,  AF4, DRIVE_HIGH)
+#define GPIO4_MMC1_DAT1		MFP_CFG_LPM(GPIO4,  AF4, DRIVE_HIGH)
+#define GPIO5_MMC1_DAT2		MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
+#define GPIO6_MMC1_DAT3		MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
+
+/* MMC2 */
+#define GPIO9_MMC2_DAT0		MFP_CFG_LPM(GPIO9,  AF4, PULL_HIGH)
+#define GPIO10_MMC2_DAT1	MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH)
+#define GPIO11_MMC2_DAT2	MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH)
+#define GPIO12_MMC2_DAT3	MFP_CFG_LPM(GPIO12, AF4, PULL_HIGH)
+#define GPIO13_MMC2_CLK		MFP_CFG_LPM(GPIO13, AF4, PULL_HIGH)
+#define GPIO14_MMC2_CMD		MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH)
+#define GPIO77_MMC2_DAT0	MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
+#define GPIO78_MMC2_DAT1	MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
+#define GPIO79_MMC2_DAT2	MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
+#define GPIO80_MMC2_DAT3	MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
+#define GPIO81_MMC2_CLK		MFP_CFG_LPM(GPIO81, AF4, PULL_HIGH)
+#define GPIO82_MMC2_CMD		MFP_CFG_LPM(GPIO82, AF4, PULL_HIGH)
+
+/* SSP1 */
+#define GPIO89_SSP1_EXTCLK	MFP_CFG(GPIO89, AF1)
+#define GPIO90_SSP1_SYSCLK	MFP_CFG(GPIO90, AF1)
+#define GPIO15_SSP1_SCLK	MFP_CFG(GPIO15, AF6)
+#define GPIO16_SSP1_FRM		MFP_CFG(GPIO16, AF2)
+#define GPIO33_SSP1_SCLK	MFP_CFG(GPIO33, AF5)
+#define GPIO34_SSP1_FRM		MFP_CFG(GPIO34, AF5)
+#define GPIO85_SSP1_SCLK	MFP_CFG(GPIO85, AF1)
+#define GPIO86_SSP1_FRM		MFP_CFG(GPIO86, AF1)
+#define GPIO18_SSP1_TXD		MFP_CFG(GPIO18, AF7)
+#define GPIO18_SSP1_RXD		MFP_CFG(GPIO18, AF2)
+#define GPIO20_SSP1_TXD		MFP_CFG(GPIO20, AF2)
+#define GPIO20_SSP1_RXD		MFP_CFG(GPIO20, AF7)
+#define GPIO35_SSP1_TXD		MFP_CFG(GPIO35, AF5)
+#define GPIO35_SSP1_RXD		MFP_CFG(GPIO35, AF4)
+#define GPIO36_SSP1_TXD		MFP_CFG(GPIO36, AF5)
+#define GPIO36_SSP1_RXD		MFP_CFG(GPIO36, AF6)
+#define GPIO87_SSP1_TXD		MFP_CFG(GPIO87, AF1)
+#define GPIO87_SSP1_RXD		MFP_CFG(GPIO87, AF6)
+#define GPIO88_SSP1_TXD		MFP_CFG(GPIO88, AF6)
+#define GPIO88_SSP1_RXD		MFP_CFG(GPIO88, AF1)
+
+/* SSP2 */
+#define GPIO29_SSP2_EXTCLK	MFP_CFG(GPIO29, AF2)
+#define GPIO23_SSP2_SCLK	MFP_CFG(GPIO23, AF2)
+#define GPIO17_SSP2_FRM		MFP_CFG(GPIO17, AF2)
+#define GPIO25_SSP2_SCLK	MFP_CFG(GPIO25, AF2)
+#define GPIO26_SSP2_FRM		MFP_CFG(GPIO26, AF2)
+#define GPIO33_SSP2_SCLK	MFP_CFG(GPIO33, AF6)
+#define GPIO34_SSP2_FRM		MFP_CFG(GPIO34, AF6)
+#define GPIO64_SSP2_SCLK	MFP_CFG(GPIO64, AF2)
+#define GPIO65_SSP2_FRM		MFP_CFG(GPIO65, AF2)
+#define GPIO19_SSP2_TXD		MFP_CFG(GPIO19, AF2)
+#define GPIO19_SSP2_RXD		MFP_CFG(GPIO19, AF7)
+#define GPIO24_SSP2_TXD		MFP_CFG(GPIO24, AF5)
+#define GPIO24_SSP2_RXD		MFP_CFG(GPIO24, AF4)
+#define GPIO27_SSP2_TXD		MFP_CFG(GPIO27, AF2)
+#define GPIO27_SSP2_RXD		MFP_CFG(GPIO27, AF5)
+#define GPIO28_SSP2_TXD		MFP_CFG(GPIO28, AF5)
+#define GPIO28_SSP2_RXD		MFP_CFG(GPIO28, AF2)
+#define GPIO35_SSP2_TXD		MFP_CFG(GPIO35, AF7)
+#define GPIO35_SSP2_RXD		MFP_CFG(GPIO35, AF6)
+#define GPIO66_SSP2_TXD		MFP_CFG(GPIO66, AF4)
+#define GPIO66_SSP2_RXD		MFP_CFG(GPIO66, AF2)
+#define GPIO67_SSP2_TXD		MFP_CFG(GPIO67, AF2)
+#define GPIO67_SSP2_RXD		MFP_CFG(GPIO67, AF4)
+#define GPIO36_SSP2_TXD		MFP_CFG(GPIO36, AF7)
+
+/* SSP3 */
+#define GPIO69_SSP3_FRM		MFP_CFG_X(GPIO69, AF2, DS08X, DRIVE_LOW)
+#define GPIO68_SSP3_SCLK	MFP_CFG_X(GPIO68, AF2, DS08X, FLOAT)
+#define GPIO92_SSP3_FRM		MFP_CFG_X(GPIO92, AF1, DS08X, DRIVE_LOW)
+#define GPIO91_SSP3_SCLK	MFP_CFG_X(GPIO91, AF1, DS08X, FLOAT)
+#define GPIO70_SSP3_TXD		MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO70_SSP3_RXD		MFP_CFG_X(GPIO70, AF5, DS08X, FLOAT)
+#define GPIO71_SSP3_TXD		MFP_CFG_X(GPIO71, AF5, DS08X, DRIVE_LOW)
+#define GPIO71_SSP3_RXD		MFP_CFG_X(GPIO71, AF2, DS08X, FLOAT)
+#define GPIO93_SSP3_TXD		MFP_CFG_X(GPIO93, AF1, DS08X, DRIVE_LOW)
+#define GPIO93_SSP3_RXD		MFP_CFG_X(GPIO93, AF5, DS08X, FLOAT)
+#define GPIO94_SSP3_TXD		MFP_CFG_X(GPIO94, AF5, DS08X, DRIVE_LOW)
+#define GPIO94_SSP3_RXD		MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT)
+
+/* SSP4 */
+#define GPIO95_SSP4_SCLK	MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_SSP4_FRM		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+#define GPIO97_SSP4_TXD		MFP_CFG_LPM(GPIO97, AF1, PULL_HIGH)
+#define GPIO97_SSP4_RXD		MFP_CFG_LPM(GPIO97, AF5, PULL_HIGH)
+#define GPIO98_SSP4_TXD		MFP_CFG_LPM(GPIO98, AF5, PULL_HIGH)
+#define GPIO98_SSP4_RXD		MFP_CFG_LPM(GPIO98, AF1, PULL_HIGH)
+
+/* UART1 */
+#define GPIO32_UART1_CTS	MFP_CFG_LPM(GPIO32,  AF2, FLOAT)
+#define GPIO37_UART1_CTS	MFP_CFG_LPM(GPIO37,  AF4, FLOAT)
+#define GPIO79_UART1_CTS	MFP_CFG_LPM(GPIO79,  AF1, FLOAT)
+#define GPIO84_UART1_CTS	MFP_CFG_LPM(GPIO84,  AF3, FLOAT)
+#define GPIO101_UART1_CTS	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
+#define GPIO106_UART1_CTS	MFP_CFG_LPM(GPIO106, AF6, FLOAT)
+
+#define GPIO32_UART1_RTS	MFP_CFG_LPM(GPIO32,  AF4, FLOAT)
+#define GPIO37_UART1_RTS	MFP_CFG_LPM(GPIO37,  AF2, FLOAT)
+#define GPIO79_UART1_RTS	MFP_CFG_LPM(GPIO79,  AF3, FLOAT)
+#define GPIO84_UART1_RTS	MFP_CFG_LPM(GPIO84,  AF1, FLOAT)
+#define GPIO101_UART1_RTS	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
+#define GPIO106_UART1_RTS	MFP_CFG_LPM(GPIO106, AF1, FLOAT)
+
+#define GPIO34_UART1_DSR	MFP_CFG_LPM(GPIO34,  AF2, FLOAT)
+#define GPIO36_UART1_DSR	MFP_CFG_LPM(GPIO36,  AF4, FLOAT)
+#define GPIO81_UART1_DSR	MFP_CFG_LPM(GPIO81,  AF1, FLOAT)
+#define GPIO83_UART1_DSR	MFP_CFG_LPM(GPIO83,  AF3, FLOAT)
+#define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
+#define GPIO105_UART1_DSR	MFP_CFG_LPM(GPIO105, AF6, FLOAT)
+
+#define GPIO34_UART1_DTR	MFP_CFG_LPM(GPIO34,  AF4, FLOAT)
+#define GPIO36_UART1_DTR	MFP_CFG_LPM(GPIO36,  AF2, FLOAT)
+#define GPIO81_UART1_DTR	MFP_CFG_LPM(GPIO81,  AF3, FLOAT)
+#define GPIO83_UART1_DTR	MFP_CFG_LPM(GPIO83,  AF1, FLOAT)
+#define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
+#define GPIO105_UART1_DTR	MFP_CFG_LPM(GPIO105, AF1, FLOAT)
+
+#define GPIO35_UART1_RI		MFP_CFG_LPM(GPIO35,  AF2, FLOAT)
+#define GPIO82_UART1_RI		MFP_CFG_LPM(GPIO82,  AF1, FLOAT)
+#define GPIO104_UART1_RI	MFP_CFG_LPM(GPIO104, AF1, FLOAT)
+
+#define GPIO33_UART1_DCD	MFP_CFG_LPM(GPIO33,  AF2, FLOAT)
+#define GPIO80_UART1_DCD	MFP_CFG_LPM(GPIO80,  AF1, FLOAT)
+#define GPIO102_UART1_DCD	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
+
+#define GPIO30_UART1_RXD	MFP_CFG_LPM(GPIO30,  AF2, FLOAT)
+#define GPIO31_UART1_RXD	MFP_CFG_LPM(GPIO31,  AF4, FLOAT)
+#define GPIO77_UART1_RXD	MFP_CFG_LPM(GPIO77,  AF1, FLOAT)
+#define GPIO78_UART1_RXD	MFP_CFG_LPM(GPIO78,  AF3, FLOAT)
+#define GPIO99_UART1_RXD	MFP_CFG_LPM(GPIO99,  AF1, FLOAT)
+#define GPIO100_UART1_RXD	MFP_CFG_LPM(GPIO100, AF6, FLOAT)
+#define GPIO102_UART1_RXD	MFP_CFG_LPM(GPIO102, AF6, FLOAT)
+#define GPIO104_UART1_RXD	MFP_CFG_LPM(GPIO104, AF4, FLOAT)
+
+#define GPIO30_UART1_TXD	MFP_CFG_LPM(GPIO30,  AF4, FLOAT)
+#define GPIO31_UART1_TXD	MFP_CFG_LPM(GPIO31,  AF2, FLOAT)
+#define GPIO77_UART1_TXD	MFP_CFG_LPM(GPIO77,  AF3, FLOAT)
+#define GPIO78_UART1_TXD	MFP_CFG_LPM(GPIO78,  AF1, FLOAT)
+#define GPIO99_UART1_TXD	MFP_CFG_LPM(GPIO99,  AF6, FLOAT)
+#define GPIO100_UART1_TXD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
+#define GPIO102_UART1_TXD	MFP_CFG_LPM(GPIO102, AF4, FLOAT)
+
+/* UART2 */
+#define GPIO15_UART2_CTS	MFP_CFG_LPM(GPIO15,  AF3, FLOAT)
+#define GPIO16_UART2_CTS	MFP_CFG_LPM(GPIO16,  AF5, FLOAT)
+#define GPIO111_UART2_CTS	MFP_CFG_LPM(GPIO111, AF3, FLOAT)
+#define GPIO114_UART2_CTS	MFP_CFG_LPM(GPIO114, AF1, FLOAT)
+
+#define GPIO15_UART2_RTS	MFP_CFG_LPM(GPIO15,  AF4, FLOAT)
+#define GPIO16_UART2_RTS	MFP_CFG_LPM(GPIO16,  AF4, FLOAT)
+#define GPIO114_UART2_RTS	MFP_CFG_LPM(GPIO114, AF3, FLOAT)
+#define GPIO111_UART2_RTS	MFP_CFG_LPM(GPIO111, AF1, FLOAT)
+
+#define GPIO18_UART2_RXD	MFP_CFG_LPM(GPIO18,  AF5, FLOAT)
+#define GPIO19_UART2_RXD	MFP_CFG_LPM(GPIO19,  AF4, FLOAT)
+#define GPIO112_UART2_RXD	MFP_CFG_LPM(GPIO112, AF1, FLOAT)
+#define GPIO113_UART2_RXD	MFP_CFG_LPM(GPIO113, AF3, FLOAT)
+
+#define GPIO18_UART2_TXD	MFP_CFG_LPM(GPIO18,  AF4, FLOAT)
+#define GPIO19_UART2_TXD	MFP_CFG_LPM(GPIO19,  AF5, FLOAT)
+#define GPIO112_UART2_TXD	MFP_CFG_LPM(GPIO112, AF3, FLOAT)
+#define GPIO113_UART2_TXD	MFP_CFG_LPM(GPIO113, AF1, FLOAT)
+
+/* UART3 */
+#define GPIO91_UART3_CTS	MFP_CFG_LPM(GPIO91,  AF2, FLOAT)
+#define GPIO92_UART3_CTS	MFP_CFG_LPM(GPIO92,  AF4, FLOAT)
+#define GPIO107_UART3_CTS	MFP_CFG_LPM(GPIO107, AF1, FLOAT)
+#define GPIO108_UART3_CTS	MFP_CFG_LPM(GPIO108, AF3, FLOAT)
+
+#define GPIO91_UART3_RTS	MFP_CFG_LPM(GPIO91,  AF4, FLOAT)
+#define GPIO92_UART3_RTS	MFP_CFG_LPM(GPIO92,  AF2, FLOAT)
+#define GPIO107_UART3_RTS	MFP_CFG_LPM(GPIO107, AF3, FLOAT)
+#define GPIO108_UART3_RTS	MFP_CFG_LPM(GPIO108, AF1, FLOAT)
+
+#define GPIO7_UART3_RXD		MFP_CFG_LPM(GPIO7,   AF2, FLOAT)
+#define GPIO8_UART3_RXD		MFP_CFG_LPM(GPIO8,   AF6, FLOAT)
+#define GPIO93_UART3_RXD	MFP_CFG_LPM(GPIO93,  AF4, FLOAT)
+#define GPIO94_UART3_RXD	MFP_CFG_LPM(GPIO94,  AF2, FLOAT)
+#define GPIO109_UART3_RXD	MFP_CFG_LPM(GPIO109, AF3, FLOAT)
+#define GPIO110_UART3_RXD	MFP_CFG_LPM(GPIO110, AF1, FLOAT)
+
+#define GPIO7_UART3_TXD		MFP_CFG_LPM(GPIO7,   AF6, FLOAT)
+#define GPIO8_UART3_TXD		MFP_CFG_LPM(GPIO8,   AF2, FLOAT)
+#define GPIO93_UART3_TXD	MFP_CFG_LPM(GPIO93,  AF2, FLOAT)
+#define GPIO94_UART3_TXD	MFP_CFG_LPM(GPIO94,  AF4, FLOAT)
+#define GPIO109_UART3_TXD	MFP_CFG_LPM(GPIO109, AF1, FLOAT)
+#define GPIO110_UART3_TXD	MFP_CFG_LPM(GPIO110, AF3, FLOAT)
+
+/* USB Host */
+#define GPIO0_2_USBH_PEN	MFP_CFG(GPIO0_2, AF1)
+#define GPIO1_2_USBH_PWR	MFP_CFG(GPIO1_2, AF1)
+
+/* USB P3 */
+#define GPIO77_USB_P3_1		MFP_CFG(GPIO77,  AF2)
+#define GPIO78_USB_P3_2		MFP_CFG(GPIO78,  AF2)
+#define GPIO79_USB_P3_3		MFP_CFG(GPIO79,  AF2)
+#define GPIO80_USB_P3_4		MFP_CFG(GPIO80,  AF2)
+#define GPIO81_USB_P3_5		MFP_CFG(GPIO81,  AF2)
+#define GPIO82_USB_P3_6		MFP_CFG(GPIO82,  AF2)
+
+/* PWM */
+#define GPIO17_PWM0_OUT		MFP_CFG(GPIO17, AF1)
+#define GPIO18_PWM1_OUT		MFP_CFG(GPIO18, AF1)
+#define GPIO19_PWM2_OUT		MFP_CFG(GPIO19, AF1)
+#define GPIO20_PWM3_OUT		MFP_CFG(GPIO20, AF1)
+
+/* CIR */
+#define GPIO8_CIR_OUT		MFP_CFG(GPIO8, AF5)
+#define GPIO16_CIR_OUT		MFP_CFG(GPIO16, AF3)
+
+#define GPIO20_OW_DQ_IN		MFP_CFG(GPIO20, AF5)
+#define GPIO126_OW_DQ		MFP_CFG(GPIO126, AF2)
+
+#define GPIO0_DF_RDY		MFP_CFG(GPIO0, AF1)
+#define GPIO7_CLK_BYPASS_XSC	MFP_CFG(GPIO7, AF7)
+#define GPIO17_EXT_SYNC_MVT_0	MFP_CFG(GPIO17, AF6)
+#define GPIO18_EXT_SYNC_MVT_1	MFP_CFG(GPIO18, AF6)
+#define GPIO19_OST_CHOUT_MVT_0	MFP_CFG(GPIO19, AF6)
+#define GPIO20_OST_CHOUT_MVT_1	MFP_CFG(GPIO20, AF6)
+#define GPIO49_48M_CLK		MFP_CFG(GPIO49, AF2)
+#define GPIO126_EXT_CLK		MFP_CFG(GPIO126, AF3)
+#define GPIO127_CLK_BYPASS_GB	MFP_CFG(GPIO127, AF7)
+#define GPIO71_EXT_MATCH_MVT	MFP_CFG(GPIO71, AF6)
+
+#define GPIO3_uIO_IN		MFP_CFG(GPIO3, AF1)
+
+#define GPIO4_uSIM_CARD_STATE	MFP_CFG(GPIO4, AF1)
+#define GPIO5_uSIM_uCLK		MFP_CFG(GPIO5, AF1)
+#define GPIO6_uSIM_uRST		MFP_CFG(GPIO6, AF1)
+#define GPIO16_uSIM_UVS_0	MFP_CFG(GPIO16, AF1)
+
+#define GPIO9_SCIO		MFP_CFG(GPIO9, AF1)
+#define GPIO20_RTC_MVT		MFP_CFG(GPIO20, AF4)
+#define GPIO126_RTC_MVT		MFP_CFG(GPIO126, AF1)
+
+/*
+ * PXA300 specific MFP configurations
+ */
+#ifdef CONFIG_CPU_PXA300
+#define GPIO99_USB_P2_2		MFP_CFG(GPIO99, AF2)
+#define GPIO99_USB_P2_5		MFP_CFG(GPIO99, AF3)
+#define GPIO99_USB_P2_6		MFP_CFG(GPIO99, AF4)
+#define GPIO100_USB_P2_2	MFP_CFG(GPIO100, AF4)
+#define GPIO100_USB_P2_5	MFP_CFG(GPIO100, AF5)
+#define GPIO101_USB_P2_1	MFP_CFG(GPIO101, AF2)
+#define GPIO102_USB_P2_4	MFP_CFG(GPIO102, AF2)
+#define GPIO104_USB_P2_3	MFP_CFG(GPIO104, AF2)
+#define GPIO105_USB_P2_5	MFP_CFG(GPIO105, AF2)
+#define GPIO100_USB_P2_6	MFP_CFG(GPIO100, AF2)
+#define GPIO106_USB_P2_7	MFP_CFG(GPIO106, AF2)
+#define GPIO103_USB_P2_8	MFP_CFG(GPIO103, AF2)
+
+/* U2D UTMI */
+#define GPIO38_UTM_CLK		MFP_CFG(GPIO38,  AF1)
+#define GPIO26_U2D_RXERROR	MFP_CFG(GPIO26,  AF3)
+#define GPIO50_U2D_RXERROR	MFP_CFG(GPIO50,  AF1)
+#define GPIO89_U2D_RXERROR	MFP_CFG(GPIO89,  AF5)
+#define GPIO24_UTM_RXVALID	MFP_CFG(GPIO24,  AF3)
+#define GPIO48_UTM_RXVALID	MFP_CFG(GPIO48,  AF2)
+#define GPIO87_UTM_RXVALID	MFP_CFG(GPIO87,  AF5)
+#define GPIO25_UTM_RXACTIVE	MFP_CFG(GPIO25,  AF3)
+#define GPIO47_UTM_RXACTIVE	MFP_CFG(GPIO47,  AF2)
+#define GPIO49_UTM_RXACTIVE	MFP_CFG(GPIO49,  AF1)
+#define GPIO88_UTM_RXACTIVE	MFP_CFG(GPIO88,  AF5)
+#define GPIO53_UTM_TXREADY	MFP_CFG(GPIO53,  AF1)
+#define GPIO67_UTM_LINESTATE_0	MFP_CFG(GPIO67,  AF3)
+#define GPIO92_UTM_LINESTATE_0	MFP_CFG(GPIO92,  AF3)
+#define GPIO104_UTM_LINESTATE_0	MFP_CFG(GPIO104, AF3)
+#define GPIO109_UTM_LINESTATE_0	MFP_CFG(GPIO109, AF4)
+#define GPIO68_UTM_LINESTATE_1	MFP_CFG(GPIO68,  AF3)
+#define GPIO93_UTM_LINESTATE_1	MFP_CFG(GPIO93,  AF3)
+#define GPIO105_UTM_LINESTATE_1	MFP_CFG(GPIO105, AF3)
+#define GPIO27_U2D_OPMODE_0	MFP_CFG(GPIO27,  AF4)
+#define GPIO51_U2D_OPMODE_0	MFP_CFG(GPIO51,  AF2)
+#define GPIO90_U2D_OPMODE_0	MFP_CFG(GPIO90,  AF7)
+#define GPIO28_U2D_OPMODE_1	MFP_CFG(GPIO28,  AF4)
+#define GPIO52_U2D_OPMODE_1	MFP_CFG(GPIO52,  AF2)
+#define GPIO106_U2D_OPMODE_1	MFP_CFG(GPIO106, AF3)
+#define GPIO110_U2D_OPMODE_1	MFP_CFG(GPIO110, AF5)
+#define GPIO76_U2D_RESET	MFP_CFG(GPIO76,  AF1)
+#define GPIO95_U2D_RESET	MFP_CFG(GPIO95,  AF2)
+#define GPIO100_U2D_RESET	MFP_CFG(GPIO100, AF3)
+#define GPIO66_U2D_SUSPEND	MFP_CFG(GPIO66,  AF3)
+#define GPIO98_U2D_SUSPEND	MFP_CFG(GPIO98,  AF2)
+#define GPIO103_U2D_SUSPEND	MFP_CFG(GPIO103, AF3)
+#define GPIO65_U2D_TERM_SEL	MFP_CFG(GPIO65,  AF5)
+#define GPIO97_U2D_TERM_SEL	MFP_CFG(GPIO97,  AF3)
+#define GPIO102_U2D_TERM_SEL	MFP_CFG(GPIO102, AF5)
+#define GPIO29_U2D_TXVALID	MFP_CFG(GPIO29,  AF3)
+#define GPIO52_U2D_TXVALID	MFP_CFG(GPIO52,  AF4)
+#define GPIO69_U2D_TXVALID	MFP_CFG(GPIO69,  AF3)
+#define GPIO85_U2D_TXVALID	MFP_CFG(GPIO85,  AF7)
+#define GPIO64_U2D_XCVR_SEL	MFP_CFG(GPIO64,  AF5)
+#define GPIO96_U2D_XCVR_SEL	MFP_CFG(GPIO96,  AF3)
+#define GPIO101_U2D_XCVR_SEL	MFP_CFG(GPIO101, AF5)
+#define GPIO30_UTM_PHYDATA_0	MFP_CFG(GPIO30,  AF3)
+#define GPIO31_UTM_PHYDATA_1	MFP_CFG(GPIO31,  AF3)
+#define GPIO32_UTM_PHYDATA_2	MFP_CFG(GPIO32,  AF3)
+#define GPIO33_UTM_PHYDATA_3	MFP_CFG(GPIO33,  AF3)
+#define GPIO34_UTM_PHYDATA_4	MFP_CFG(GPIO34,  AF3)
+#define GPIO35_UTM_PHYDATA_5	MFP_CFG(GPIO35,  AF3)
+#define GPIO36_UTM_PHYDATA_6	MFP_CFG(GPIO36,  AF3)
+#define GPIO37_UTM_PHYDATA_7	MFP_CFG(GPIO37,  AF3)
+#define GPIO39_UTM_PHYDATA_0	MFP_CFG(GPIO39,  AF3)
+#define GPIO40_UTM_PHYDATA_1	MFP_CFG(GPIO40,  AF3)
+#define GPIO41_UTM_PHYDATA_2	MFP_CFG(GPIO41,  AF3)
+#define GPIO42_UTM_PHYDATA_3	MFP_CFG(GPIO42,  AF3)
+#define GPIO43_UTM_PHYDATA_4	MFP_CFG(GPIO43,  AF3)
+#define GPIO44_UTM_PHYDATA_5	MFP_CFG(GPIO44,  AF3)
+#define GPIO45_UTM_PHYDATA_6	MFP_CFG(GPIO45,  AF3)
+#define GPIO46_UTM_PHYDATA_7	MFP_CFG(GPIO46,  AF3)
+#endif /* CONFIG_CPU_PXA300 */
+
+/*
+ * PXA310 specific MFP configurations
+ */
+#ifdef CONFIG_CPU_PXA310
+/* USB P2 */
+#define GPIO36_USB_P2_1		MFP_CFG(GPIO36, AF1)
+#define GPIO30_USB_P2_2		MFP_CFG(GPIO30, AF1)
+#define GPIO35_USB_P2_3		MFP_CFG(GPIO35, AF1)
+#define GPIO32_USB_P2_4		MFP_CFG(GPIO32, AF1)
+#define GPIO34_USB_P2_5		MFP_CFG(GPIO34, AF1)
+#define GPIO31_USB_P2_6		MFP_CFG(GPIO31, AF1)
+
+/* MMC1 */
+#define GPIO24_MMC1_CMD		MFP_CFG(GPIO24, AF3)
+#define GPIO29_MMC1_DAT0	MFP_CFG(GPIO29, AF3)
+
+/* MMC3 */
+#define GPIO103_MMC3_CLK	MFP_CFG(GPIO103, AF2)
+#define GPIO105_MMC3_CMD	MFP_CFG(GPIO105, AF2)
+#define GPIO11_2_MMC3_CLK	MFP_CFG(GPIO11_2, AF1)
+#define GPIO12_2_MMC3_CMD	MFP_CFG(GPIO12_2, AF1)
+#define GPIO7_2_MMC3_DAT0	MFP_CFG(GPIO7_2, AF1)
+#define GPIO8_2_MMC3_DAT1	MFP_CFG(GPIO8_2, AF1)
+#define GPIO9_2_MMC3_DAT2	MFP_CFG(GPIO9_2, AF1)
+#define GPIO10_2_MMC3_DAT3	MFP_CFG(GPIO10_2, AF1)
+
+/* ULPI */
+#define GPIO38_ULPI_CLK		MFP_CFG(GPIO38, AF1)
+#define GPIO30_ULPI_DATA_OUT_0	MFP_CFG(GPIO30, AF3)
+#define GPIO31_ULPI_DATA_OUT_1	MFP_CFG(GPIO31, AF3)
+#define GPIO32_ULPI_DATA_OUT_2	MFP_CFG(GPIO32, AF3)
+#define GPIO33_ULPI_DATA_OUT_3	MFP_CFG(GPIO33, AF3)
+#define GPIO34_ULPI_DATA_OUT_4	MFP_CFG(GPIO34, AF3)
+#define GPIO35_ULPI_DATA_OUT_5	MFP_CFG(GPIO35, AF3)
+#define GPIO36_ULPI_DATA_OUT_6	MFP_CFG(GPIO36, AF3)
+#define GPIO37_ULPI_DATA_OUT_7	MFP_CFG(GPIO37, AF3)
+#define GPIO33_ULPI_OTG_INTR	MFP_CFG(GPIO33, AF1)
+
+#define ULPI_DIR	MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X)
+#define ULPI_NXT	MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X)
+#define ULPI_STP	MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X)
+#endif /* CONFIG_CPU_PXA310 */
+
+#endif /* __ASM_ARCH_MFP_PXA300_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
new file mode 100644
index 0000000..7499051
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -0,0 +1,447 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+ *
+ * PXA320 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ *             initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA320_H
+#define __ASM_ARCH_MFP_PXA320_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+
+/* GPIO */
+#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
+#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
+
+#define GPIO7_2_GPIO		MFP_CFG(GPIO7_2, AF0)
+#define GPIO8_2_GPIO		MFP_CFG(GPIO8_2, AF0)
+#define GPIO9_2_GPIO		MFP_CFG(GPIO9_2, AF0)
+#define GPIO10_2_GPIO		MFP_CFG(GPIO10_2, AF0)
+#define GPIO11_2_GPIO		MFP_CFG(GPIO11_2, AF0)
+#define GPIO12_2_GPIO		MFP_CFG(GPIO12_2, AF0)
+#define GPIO13_2_GPIO		MFP_CFG(GPIO13_2, AF0)
+#define GPIO14_2_GPIO		MFP_CFG(GPIO14_2, AF0)
+#define GPIO15_2_GPIO		MFP_CFG(GPIO15_2, AF0)
+#define GPIO16_2_GPIO		MFP_CFG(GPIO16_2, AF0)
+#define GPIO17_2_GPIO		MFP_CFG(GPIO17_2, AF0)
+
+/* Chip Select */
+#define GPIO4_nCS3		MFP_CFG(GPIO4, AF1)
+
+/* AC97 */
+#define GPIO34_AC97_SYSCLK	MFP_CFG(GPIO34, AF1)
+#define GPIO39_AC97_BITCLK	MFP_CFG(GPIO39, AF1)
+#define GPIO40_AC97_nACRESET	MFP_CFG(GPIO40, AF1)
+#define GPIO35_AC97_SDATA_IN_0	MFP_CFG(GPIO35, AF1)
+#define GPIO36_AC97_SDATA_IN_1	MFP_CFG(GPIO36, AF1)
+#define GPIO32_AC97_SDATA_IN_2	MFP_CFG(GPIO32, AF2)
+#define GPIO33_AC97_SDATA_IN_3	MFP_CFG(GPIO33, AF2)
+#define GPIO11_AC97_SDATA_IN_2	MFP_CFG(GPIO11, AF3)
+#define GPIO12_AC97_SDATA_IN_3	MFP_CFG(GPIO12, AF3)
+#define GPIO37_AC97_SDATA_OUT	MFP_CFG(GPIO37, AF1)
+#define GPIO38_AC97_SYNC	MFP_CFG(GPIO38, AF1)
+
+/* I2C */
+#define GPIO32_I2C_SCL		MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH)
+#define GPIO33_I2C_SDA		MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH)
+
+/* QCI */
+#define GPIO49_CI_DD_0		MFP_CFG_DRV(GPIO49, AF1, DS04X)
+#define GPIO50_CI_DD_1		MFP_CFG_DRV(GPIO50, AF1, DS04X)
+#define GPIO51_CI_DD_2		MFP_CFG_DRV(GPIO51, AF1, DS04X)
+#define GPIO52_CI_DD_3		MFP_CFG_DRV(GPIO52, AF1, DS04X)
+#define GPIO53_CI_DD_4		MFP_CFG_DRV(GPIO53, AF1, DS04X)
+#define GPIO54_CI_DD_5		MFP_CFG_DRV(GPIO54, AF1, DS04X)
+#define GPIO55_CI_DD_6		MFP_CFG_DRV(GPIO55, AF1, DS04X)
+#define GPIO56_CI_DD_7		MFP_CFG_DRV(GPIO56, AF0, DS04X)
+#define GPIO57_CI_DD_8		MFP_CFG_DRV(GPIO57, AF1, DS04X)
+#define GPIO58_CI_DD_9		MFP_CFG_DRV(GPIO58, AF1, DS04X)
+#define GPIO59_CI_MCLK		MFP_CFG_DRV(GPIO59, AF0, DS04X)
+#define GPIO60_CI_PCLK		MFP_CFG_DRV(GPIO60, AF0, DS04X)
+#define GPIO61_CI_HSYNC		MFP_CFG_DRV(GPIO61, AF0, DS04X)
+#define GPIO62_CI_VSYNC		MFP_CFG_DRV(GPIO62, AF0, DS04X)
+
+#define GPIO31_CIR_OUT		MFP_CFG(GPIO31, AF5)
+
+#define GPIO0_2_CLK_EXT		MFP_CFG(GPIO0_2, AF3)
+#define GPIO0_DRQ		MFP_CFG(GPIO0, AF2)
+#define GPIO11_EXT_SYNC0	MFP_CFG(GPIO11, AF5)
+#define GPIO12_EXT_SYNC1	MFP_CFG(GPIO12, AF6)
+#define GPIO0_2_HZ_CLK		MFP_CFG(GPIO0_2, AF1)
+#define GPIO14_HZ_CLK		MFP_CFG(GPIO14, AF4)
+#define GPIO30_ICP_RXD		MFP_CFG(GPIO30, AF1)
+#define GPIO31_ICP_TXD		MFP_CFG(GPIO31, AF1)
+
+#define GPIO83_KP_DKIN_0	MFP_CFG_LPM(GPIO83, AF3, FLOAT)
+#define GPIO84_KP_DKIN_1	MFP_CFG_LPM(GPIO84, AF3, FLOAT)
+#define GPIO85_KP_DKIN_2	MFP_CFG_LPM(GPIO85, AF3, FLOAT)
+#define GPIO86_KP_DKIN_3	MFP_CFG_LPM(GPIO86, AF3, FLOAT)
+
+#define GPIO105_KP_DKIN_0	MFP_CFG_LPM(GPIO105, AF2, FLOAT)
+#define GPIO106_KP_DKIN_1	MFP_CFG_LPM(GPIO106, AF2, FLOAT)
+#define GPIO107_KP_DKIN_2	MFP_CFG_LPM(GPIO107, AF2, FLOAT)
+#define GPIO108_KP_DKIN_3	MFP_CFG_LPM(GPIO108, AF2, FLOAT)
+#define GPIO109_KP_DKIN_4	MFP_CFG_LPM(GPIO109, AF2, FLOAT)
+#define GPIO110_KP_DKIN_5	MFP_CFG_LPM(GPIO110, AF2, FLOAT)
+#define GPIO111_KP_DKIN_6	MFP_CFG_LPM(GPIO111, AF2, FLOAT)
+#define GPIO112_KP_DKIN_7	MFP_CFG_LPM(GPIO112, AF2, FLOAT)
+
+#define GPIO113_KP_DKIN_0	MFP_CFG_LPM(GPIO113, AF2, FLOAT)
+#define GPIO114_KP_DKIN_1	MFP_CFG_LPM(GPIO114, AF2, FLOAT)
+#define GPIO115_KP_DKIN_2	MFP_CFG_LPM(GPIO115, AF2, FLOAT)
+#define GPIO116_KP_DKIN_3	MFP_CFG_LPM(GPIO116, AF2, FLOAT)
+#define GPIO117_KP_DKIN_4	MFP_CFG_LPM(GPIO117, AF2, FLOAT)
+#define GPIO118_KP_DKIN_5	MFP_CFG_LPM(GPIO118, AF2, FLOAT)
+#define GPIO119_KP_DKIN_6	MFP_CFG_LPM(GPIO119, AF2, FLOAT)
+#define GPIO120_KP_DKIN_7	MFP_CFG_LPM(GPIO120, AF2, FLOAT)
+
+#define GPIO127_KP_DKIN_0	MFP_CFG_LPM(GPIO127, AF2, FLOAT)
+#define GPIO126_KP_DKIN_1	MFP_CFG_LPM(GPIO126, AF2, FLOAT)
+
+#define GPIO2_2_KP_DKIN_0	MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
+#define GPIO3_2_KP_DKIN_1	MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
+#define GPIO125_KP_DKIN_2	MFP_CFG_LPM(GPIO125, AF2, FLOAT)
+#define GPIO124_KP_DKIN_3	MFP_CFG_LPM(GPIO124, AF2, FLOAT)
+#define GPIO123_KP_DKIN_4	MFP_CFG_LPM(GPIO123, AF2, FLOAT)
+#define GPIO122_KP_DKIN_5	MFP_CFG_LPM(GPIO122, AF2, FLOAT)
+#define GPIO121_KP_DKIN_6	MFP_CFG_LPM(GPIO121, AF2, FLOAT)
+#define GPIO4_2_KP_DKIN_7	MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
+
+#define GPIO113_KP_MKIN_0	MFP_CFG_LPM(GPIO113, AF1, FLOAT)
+#define GPIO114_KP_MKIN_1	MFP_CFG_LPM(GPIO114, AF1, FLOAT)
+#define GPIO115_KP_MKIN_2	MFP_CFG_LPM(GPIO115, AF1, FLOAT)
+#define GPIO116_KP_MKIN_3	MFP_CFG_LPM(GPIO116, AF1, FLOAT)
+#define GPIO117_KP_MKIN_4	MFP_CFG_LPM(GPIO117, AF1, FLOAT)
+#define GPIO118_KP_MKIN_5	MFP_CFG_LPM(GPIO118, AF1, FLOAT)
+#define GPIO119_KP_MKIN_6	MFP_CFG_LPM(GPIO119, AF1, FLOAT)
+#define GPIO120_KP_MKIN_7	MFP_CFG_LPM(GPIO120, AF1, FLOAT)
+
+#define GPIO83_KP_MKOUT_0	MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH)
+#define GPIO84_KP_MKOUT_1	MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH)
+#define GPIO85_KP_MKOUT_2	MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH)
+#define GPIO86_KP_MKOUT_3	MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_4	MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH)
+#define GPIO14_KP_MKOUT_5	MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH)
+
+#define GPIO121_KP_MKOUT_0	MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
+#define GPIO122_KP_MKOUT_1	MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
+#define GPIO123_KP_MKOUT_2	MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
+#define GPIO124_KP_MKOUT_3	MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
+#define GPIO125_KP_MKOUT_4	MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
+#define GPIO126_KP_MKOUT_5	MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH)
+#define GPIO127_KP_MKOUT_6	MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH)
+#define GPIO5_2_KP_MKOUT_7	MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO6_2_LCD_LDD_0	MFP_CFG_DRV(GPIO6_2, AF1, DS01X)
+#define GPIO7_2_LCD_LDD_1	MFP_CFG_DRV(GPIO7_2, AF1, DS01X)
+#define GPIO8_2_LCD_LDD_2	MFP_CFG_DRV(GPIO8_2, AF1, DS01X)
+#define GPIO9_2_LCD_LDD_3	MFP_CFG_DRV(GPIO9_2, AF1, DS01X)
+#define GPIO10_2_LCD_LDD_4	MFP_CFG_DRV(GPIO10_2, AF1, DS01X)
+#define GPIO11_2_LCD_LDD_5	MFP_CFG_DRV(GPIO11_2, AF1, DS01X)
+#define GPIO12_2_LCD_LDD_6	MFP_CFG_DRV(GPIO12_2, AF1, DS01X)
+#define GPIO13_2_LCD_LDD_7	MFP_CFG_DRV(GPIO13_2, AF1, DS01X)
+#define GPIO63_LCD_LDD_8	MFP_CFG_DRV(GPIO63, AF1, DS01X)
+#define GPIO64_LCD_LDD_9	MFP_CFG_DRV(GPIO64, AF1, DS01X)
+#define GPIO65_LCD_LDD_10	MFP_CFG_DRV(GPIO65, AF1, DS01X)
+#define GPIO66_LCD_LDD_11	MFP_CFG_DRV(GPIO66, AF1, DS01X)
+#define GPIO67_LCD_LDD_12	MFP_CFG_DRV(GPIO67, AF1, DS01X)
+#define GPIO68_LCD_LDD_13	MFP_CFG_DRV(GPIO68, AF1, DS01X)
+#define GPIO69_LCD_LDD_14	MFP_CFG_DRV(GPIO69, AF1, DS01X)
+#define GPIO70_LCD_LDD_15	MFP_CFG_DRV(GPIO70, AF1, DS01X)
+#define GPIO71_LCD_LDD_16	MFP_CFG_DRV(GPIO71, AF1, DS01X)
+#define GPIO72_LCD_LDD_17	MFP_CFG_DRV(GPIO72, AF1, DS01X)
+#define GPIO73_LCD_CS_N		MFP_CFG_DRV(GPIO73, AF2, DS01X)
+#define GPIO74_LCD_VSYNC	MFP_CFG_DRV(GPIO74, AF2, DS01X)
+#define GPIO14_2_LCD_FCLK	MFP_CFG_DRV(GPIO14_2, AF1, DS01X)
+#define GPIO15_2_LCD_LCLK	MFP_CFG_DRV(GPIO15_2, AF1, DS01X)
+#define GPIO16_2_LCD_PCLK	MFP_CFG_DRV(GPIO16_2, AF1, DS01X)
+#define GPIO17_2_LCD_BIAS	MFP_CFG_DRV(GPIO17_2, AF1, DS01X)
+#define GPIO64_LCD_VSYNC	MFP_CFG_DRV(GPIO64, AF2, DS01X)
+#define GPIO63_LCD_CS_N		MFP_CFG_DRV(GPIO63, AF2, DS01X)
+
+#define GPIO6_2_MLCD_DD_0	MFP_CFG_DRV(GPIO6_2, AF7, DS08X)
+#define GPIO7_2_MLCD_DD_1	MFP_CFG_DRV(GPIO7_2, AF7, DS08X)
+#define GPIO8_2_MLCD_DD_2	MFP_CFG_DRV(GPIO8_2, AF7, DS08X)
+#define GPIO9_2_MLCD_DD_3	MFP_CFG_DRV(GPIO9_2, AF7, DS08X)
+#define GPIO10_2_MLCD_DD_4	MFP_CFG_DRV(GPIO10_2, AF7, DS08X)
+#define GPIO11_2_MLCD_DD_5	MFP_CFG_DRV(GPIO11_2, AF7, DS08X)
+#define GPIO12_2_MLCD_DD_6	MFP_CFG_DRV(GPIO12_2, AF7, DS08X)
+#define GPIO13_2_MLCD_DD_7	MFP_CFG_DRV(GPIO13_2, AF7, DS08X)
+#define GPIO63_MLCD_DD_8	MFP_CFG_DRV(GPIO63, AF7, DS08X)
+#define GPIO64_MLCD_DD_9	MFP_CFG_DRV(GPIO64, AF7, DS08X)
+#define GPIO65_MLCD_DD_10	MFP_CFG_DRV(GPIO65, AF7, DS08X)
+#define GPIO66_MLCD_DD_11	MFP_CFG_DRV(GPIO66, AF7, DS08X)
+#define GPIO67_MLCD_DD_12	MFP_CFG_DRV(GPIO67, AF7, DS08X)
+#define GPIO68_MLCD_DD_13	MFP_CFG_DRV(GPIO68, AF7, DS08X)
+#define GPIO69_MLCD_DD_14	MFP_CFG_DRV(GPIO69, AF7, DS08X)
+#define GPIO70_MLCD_DD_15	MFP_CFG_DRV(GPIO70, AF7, DS08X)
+#define GPIO71_MLCD_DD_16	MFP_CFG_DRV(GPIO71, AF7, DS08X)
+#define GPIO72_MLCD_DD_17	MFP_CFG_DRV(GPIO72, AF7, DS08X)
+#define GPIO73_MLCD_CS		MFP_CFG_DRV(GPIO73, AF7, DS08X)
+#define GPIO74_MLCD_VSYNC	MFP_CFG_DRV(GPIO74, AF7, DS08X)
+#define GPIO14_2_MLCD_FCLK	MFP_CFG_DRV(GPIO14_2, AF7, DS08X)
+#define GPIO15_2_MLCD_LCLK	MFP_CFG_DRV(GPIO15_2, AF7, DS08X)
+#define GPIO16_2_MLCD_PCLK	MFP_CFG_DRV(GPIO16_2, AF7, DS08X)
+#define GPIO17_2_MLCD_BIAS	MFP_CFG_DRV(GPIO17_2, AF7, DS08X)
+
+/* MMC1 */
+#define GPIO9_MMC1_CMD		MFP_CFG_LPM(GPIO9,  AF4, DRIVE_HIGH)
+#define GPIO22_MMC1_CLK		MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH)
+#define GPIO23_MMC1_CMD		MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH)
+#define GPIO30_MMC1_CLK		MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH)
+#define GPIO31_MMC1_CMD		MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH)
+#define GPIO5_MMC1_DAT0		MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
+#define GPIO6_MMC1_DAT1		MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
+#define GPIO7_MMC1_DAT2		MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
+#define GPIO8_MMC1_DAT3		MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
+#define GPIO18_MMC1_DAT0	MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH)
+#define GPIO19_MMC1_DAT1	MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH)
+#define GPIO20_MMC1_DAT2	MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH)
+#define GPIO21_MMC1_DAT3	MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH)
+
+#define GPIO28_MMC2_CLK		MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH)
+#define GPIO29_MMC2_CMD		MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH)
+#define GPIO30_MMC2_CLK		MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH)
+#define GPIO31_MMC2_CMD		MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH)
+#define GPIO79_MMC2_CLK		MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
+#define GPIO80_MMC2_CMD		MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
+
+#define GPIO5_MMC2_DAT0		MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH)
+#define GPIO6_MMC2_DAT1		MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH)
+#define GPIO7_MMC2_DAT2		MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH)
+#define GPIO8_MMC2_DAT3		MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH)
+#define GPIO24_MMC2_DAT0	MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH)
+#define GPIO75_MMC2_DAT0	MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH)
+#define GPIO25_MMC2_DAT1	MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH)
+#define GPIO76_MMC2_DAT1	MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH)
+#define GPIO26_MMC2_DAT2	MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH)
+#define GPIO77_MMC2_DAT2	MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
+#define GPIO27_MMC2_DAT3	MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH)
+#define GPIO78_MMC2_DAT3	MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
+
+/* 1-Wire */
+#define GPIO14_ONE_WIRE		MFP_CFG_LPM(GPIO14,  AF5, FLOAT)
+#define GPIO0_2_ONE_WIRE	MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
+
+/* SSP1 */
+#define GPIO87_SSP1_EXTCLK	MFP_CFG(GPIO87, AF1)
+#define GPIO88_SSP1_SYSCLK	MFP_CFG(GPIO88, AF1)
+#define GPIO83_SSP1_SCLK	MFP_CFG(GPIO83, AF1)
+#define GPIO84_SSP1_SFRM	MFP_CFG(GPIO84, AF1)
+#define GPIO85_SSP1_RXD		MFP_CFG(GPIO85, AF6)
+#define GPIO85_SSP1_TXD		MFP_CFG(GPIO85, AF1)
+#define GPIO86_SSP1_RXD		MFP_CFG(GPIO86, AF1)
+#define GPIO86_SSP1_TXD		MFP_CFG(GPIO86, AF6)
+
+/* SSP2 */
+#define GPIO39_SSP2_EXTCLK	MFP_CFG(GPIO39, AF2)
+#define GPIO40_SSP2_SYSCLK	MFP_CFG(GPIO40, AF2)
+#define GPIO12_SSP2_SCLK	MFP_CFG(GPIO12, AF2)
+#define GPIO35_SSP2_SCLK	MFP_CFG(GPIO35, AF2)
+#define GPIO36_SSP2_SFRM	MFP_CFG(GPIO36, AF2)
+#define GPIO37_SSP2_RXD		MFP_CFG(GPIO37, AF5)
+#define GPIO37_SSP2_TXD		MFP_CFG(GPIO37, AF2)
+#define GPIO38_SSP2_RXD		MFP_CFG(GPIO38, AF2)
+#define GPIO38_SSP2_TXD		MFP_CFG(GPIO38, AF5)
+
+#define GPIO69_SSP3_SCLK	MFP_CFG(GPIO69, AF2, DS08X, FLOAT)
+#define GPIO70_SSP3_FRM		MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO89_SSP3_SCLK	MFP_CFG(GPIO89, AF1, DS08X, FLOAT)
+#define GPIO90_SSP3_FRM		MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW)
+#define GPIO71_SSP3_RXD		MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT)
+#define GPIO71_SSP3_TXD		MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW)
+#define GPIO72_SSP3_RXD		MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT)
+#define GPIO72_SSP3_TXD		MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW)
+#define GPIO91_SSP3_RXD		MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT)
+#define GPIO91_SSP3_TXD		MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW)
+#define GPIO92_SSP3_RXD		MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT)
+#define GPIO92_SSP3_TXD		MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW)
+
+#define GPIO93_SSP4_SCLK	MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH)
+#define GPIO94_SSP4_FRM		MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH)
+#define GPIO94_SSP4_RXD		MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH)
+#define GPIO95_SSP4_RXD		MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH)
+#define GPIO95_SSP4_TXD		MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_SSP4_RXD		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+#define GPIO96_SSP4_TXD		MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH)
+
+/* UART1 */
+#define GPIO41_UART1_RXD	MFP_CFG_LPM(GPIO41, AF2, FLOAT)
+#define GPIO41_UART1_TXD	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
+#define GPIO42_UART1_RXD	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
+#define GPIO42_UART1_TXD	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO97_UART1_RXD	MFP_CFG_LPM(GPIO97, AF1, FLOAT)
+#define GPIO97_UART1_TXD	MFP_CFG_LPM(GPIO97, AF6, FLOAT)
+#define GPIO98_UART1_RXD	MFP_CFG_LPM(GPIO98, AF6, FLOAT)
+#define GPIO98_UART1_TXD	MFP_CFG_LPM(GPIO98, AF1, FLOAT)
+#define GPIO43_UART1_CTS	MFP_CFG_LPM(GPIO43, AF2, FLOAT)
+#define GPIO43_UART1_RTS	MFP_CFG_LPM(GPIO43, AF4, FLOAT)
+#define GPIO48_UART1_CTS	MFP_CFG_LPM(GPIO48, AF4, FLOAT)
+#define GPIO48_UART1_RTS	MFP_CFG_LPM(GPIO48, AF2, FLOAT)
+#define GPIO99_UART1_CTS	MFP_CFG_LPM(GPIO99, AF1, FLOAT)
+#define GPIO99_UART1_RTS	MFP_CFG_LPM(GPIO99, AF6, FLOAT)
+#define GPIO104_UART1_CTS	MFP_CFG_LPM(GPIO104, AF6, FLOAT)
+#define GPIO104_UART1_RTS	MFP_CFG_LPM(GPIO104, AF1, FLOAT)
+#define GPIO45_UART1_DTR	MFP_CFG_LPM(GPIO45, AF4, FLOAT)
+#define GPIO45_UART1_DSR	MFP_CFG_LPM(GPIO45, AF2, FLOAT)
+#define GPIO47_UART1_DTR	MFP_CFG_LPM(GPIO47, AF2, FLOAT)
+#define GPIO47_UART1_DSR	MFP_CFG_LPM(GPIO47, AF4, FLOAT)
+#define GPIO101_UART1_DTR	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
+#define GPIO101_UART1_DSR	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
+#define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
+#define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
+#define GPIO44_UART1_DCD	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO100_UART1_DCD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
+#define GPIO46_UART1_RI		MFP_CFG_LPM(GPIO46, AF2, FLOAT)
+#define GPIO102_UART1_RI	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
+
+/* UART2 */
+#define GPIO109_UART2_CTS	MFP_CFG_LPM(GPIO109, AF3, FLOAT)
+#define GPIO109_UART2_RTS	MFP_CFG_LPM(GPIO109, AF1, FLOAT)
+#define GPIO112_UART2_CTS	MFP_CFG_LPM(GPIO112, AF1, FLOAT)
+#define GPIO112_UART2_RTS	MFP_CFG_LPM(GPIO112, AF3, FLOAT)
+#define GPIO110_UART2_RXD	MFP_CFG_LPM(GPIO110, AF1, FLOAT)
+#define GPIO110_UART2_TXD	MFP_CFG_LPM(GPIO110, AF3, FLOAT)
+#define GPIO111_UART2_RXD	MFP_CFG_LPM(GPIO111, AF3, FLOAT)
+#define GPIO111_UART2_TXD	MFP_CFG_LPM(GPIO111, AF1, FLOAT)
+
+/* UART3 */
+#define GPIO89_UART3_CTS	MFP_CFG_LPM(GPIO89, AF2, FLOAT)
+#define GPIO89_UART3_RTS	MFP_CFG_LPM(GPIO89, AF4, FLOAT)
+#define GPIO90_UART3_CTS	MFP_CFG_LPM(GPIO90, AF4, FLOAT)
+#define GPIO90_UART3_RTS	MFP_CFG_LPM(GPIO90, AF2, FLOAT)
+#define GPIO105_UART3_CTS	MFP_CFG_LPM(GPIO105, AF1, FLOAT)
+#define GPIO105_UART3_RTS	MFP_CFG_LPM(GPIO105, AF3, FLOAT)
+#define GPIO106_UART3_CTS	MFP_CFG_LPM(GPIO106, AF3, FLOAT)
+#define GPIO106_UART3_RTS	MFP_CFG_LPM(GPIO106, AF1, FLOAT)
+#define GPIO30_UART3_RXD	MFP_CFG_LPM(GPIO30, AF2, FLOAT)
+#define GPIO30_UART3_TXD	MFP_CFG_LPM(GPIO30, AF6, FLOAT)
+#define GPIO31_UART3_RXD	MFP_CFG_LPM(GPIO31, AF6, FLOAT)
+#define GPIO31_UART3_TXD	MFP_CFG_LPM(GPIO31, AF2, FLOAT)
+#define GPIO91_UART3_RXD	MFP_CFG_LPM(GPIO91, AF4, FLOAT)
+#define GPIO91_UART3_TXD	MFP_CFG_LPM(GPIO91, AF2, FLOAT)
+#define GPIO92_UART3_RXD	MFP_CFG_LPM(GPIO92, AF2, FLOAT)
+#define GPIO92_UART3_TXD	MFP_CFG_LPM(GPIO92, AF4, FLOAT)
+#define GPIO107_UART3_RXD	MFP_CFG_LPM(GPIO107, AF3, FLOAT)
+#define GPIO107_UART3_TXD	MFP_CFG_LPM(GPIO107, AF1, FLOAT)
+#define GPIO108_UART3_RXD	MFP_CFG_LPM(GPIO108, AF1, FLOAT)
+#define GPIO108_UART3_TXD	MFP_CFG_LPM(GPIO108, AF3, FLOAT)
+
+
+/* USB 2.0 UTMI */
+#define GPIO10_UTM_CLK		MFP_CFG(GPIO10, AF1)
+#define GPIO36_U2D_RXERROR	MFP_CFG(GPIO36, AF3)
+#define GPIO60_U2D_RXERROR	MFP_CFG(GPIO60, AF1)
+#define GPIO87_U2D_RXERROR	MFP_CFG(GPIO87, AF5)
+#define GPIO34_UTM_RXVALID	MFP_CFG(GPIO34, AF3)
+#define GPIO58_UTM_RXVALID	MFP_CFG(GPIO58, AF2)
+#define GPIO85_UTM_RXVALID	MFP_CFG(GPIO85, AF5)
+#define GPIO35_UTM_RXACTIVE	MFP_CFG(GPIO35, AF3)
+#define GPIO59_UTM_RXACTIVE	MFP_CFG(GPIO59, AF1)
+#define GPIO86_UTM_RXACTIVE	MFP_CFG(GPIO86, AF5)
+#define GPIO73_UTM_TXREADY	MFP_CFG(GPIO73, AF1)
+#define GPIO68_UTM_LINESTATE_0	MFP_CFG(GPIO68, AF3)
+#define GPIO90_UTM_LINESTATE_0	MFP_CFG(GPIO90, AF3)
+#define GPIO102_UTM_LINESTATE_0	MFP_CFG(GPIO102, AF3)
+#define GPIO107_UTM_LINESTATE_0	MFP_CFG(GPIO107, AF4)
+#define GPIO69_UTM_LINESTATE_1	MFP_CFG(GPIO69, AF3)
+#define GPIO91_UTM_LINESTATE_1	MFP_CFG(GPIO91, AF3)
+#define GPIO103_UTM_LINESTATE_1	MFP_CFG(GPIO103, AF3)
+
+#define GPIO41_U2D_PHYDATA_0	MFP_CFG(GPIO41, AF3)
+#define GPIO42_U2D_PHYDATA_1	MFP_CFG(GPIO42, AF3)
+#define GPIO43_U2D_PHYDATA_2	MFP_CFG(GPIO43, AF3)
+#define GPIO44_U2D_PHYDATA_3	MFP_CFG(GPIO44, AF3)
+#define GPIO45_U2D_PHYDATA_4	MFP_CFG(GPIO45, AF3)
+#define GPIO46_U2D_PHYDATA_5	MFP_CFG(GPIO46, AF3)
+#define GPIO47_U2D_PHYDATA_6	MFP_CFG(GPIO47, AF3)
+#define GPIO48_U2D_PHYDATA_7	MFP_CFG(GPIO48, AF3)
+
+#define GPIO49_U2D_PHYDATA_0	MFP_CFG(GPIO49, AF3)
+#define GPIO50_U2D_PHYDATA_1	MFP_CFG(GPIO50, AF3)
+#define GPIO51_U2D_PHYDATA_2	MFP_CFG(GPIO51, AF3)
+#define GPIO52_U2D_PHYDATA_3	MFP_CFG(GPIO52, AF3)
+#define GPIO53_U2D_PHYDATA_4	MFP_CFG(GPIO53, AF3)
+#define GPIO54_U2D_PHYDATA_5	MFP_CFG(GPIO54, AF3)
+#define GPIO55_U2D_PHYDATA_6	MFP_CFG(GPIO55, AF3)
+#define GPIO56_U2D_PHYDATA_7	MFP_CFG(GPIO56, AF3)
+
+#define GPIO37_U2D_OPMODE0	MFP_CFG(GPIO37, AF4)
+#define GPIO61_U2D_OPMODE0	MFP_CFG(GPIO61, AF2)
+#define GPIO88_U2D_OPMODE0	MFP_CFG(GPIO88, AF7)
+
+#define GPIO38_U2D_OPMODE1	MFP_CFG(GPIO38, AF4)
+#define GPIO62_U2D_OPMODE1	MFP_CFG(GPIO62, AF2)
+#define GPIO104_U2D_OPMODE1	MFP_CFG(GPIO104, AF4)
+#define GPIO108_U2D_OPMODE1	MFP_CFG(GPIO108, AF5)
+
+#define GPIO74_U2D_RESET	MFP_CFG(GPIO74, AF1)
+#define GPIO93_U2D_RESET	MFP_CFG(GPIO93, AF2)
+#define GPIO98_U2D_RESET	MFP_CFG(GPIO98, AF3)
+
+#define GPIO67_U2D_SUSPEND	MFP_CFG(GPIO67, AF3)
+#define GPIO96_U2D_SUSPEND	MFP_CFG(GPIO96, AF2)
+#define GPIO101_U2D_SUSPEND	MFP_CFG(GPIO101, AF3)
+
+#define GPIO66_U2D_TERM_SEL	MFP_CFG(GPIO66, AF5)
+#define GPIO95_U2D_TERM_SEL	MFP_CFG(GPIO95, AF3)
+#define GPIO97_U2D_TERM_SEL	MFP_CFG(GPIO97, AF7)
+#define GPIO100_U2D_TERM_SEL	MFP_CFG(GPIO100, AF5)
+
+#define GPIO39_U2D_TXVALID	MFP_CFG(GPIO39, AF4)
+#define GPIO70_U2D_TXVALID	MFP_CFG(GPIO70, AF5)
+#define GPIO83_U2D_TXVALID	MFP_CFG(GPIO83, AF7)
+
+#define GPIO65_U2D_XCVR_SEL	MFP_CFG(GPIO65, AF5)
+#define GPIO94_U2D_XCVR_SEL	MFP_CFG(GPIO94, AF3)
+#define GPIO99_U2D_XCVR_SEL	MFP_CFG(GPIO99, AF5)
+
+/* USB Host 1.1 */
+#define GPIO2_2_USBH_PEN	MFP_CFG(GPIO2_2, AF1)
+#define GPIO3_2_USBH_PWR	MFP_CFG(GPIO3_2, AF1)
+
+/* USB P2 */
+#define GPIO97_USB_P2_2		MFP_CFG(GPIO97, AF2)
+#define GPIO97_USB_P2_6		MFP_CFG(GPIO97, AF4)
+#define GPIO98_USB_P2_2		MFP_CFG(GPIO98, AF4)
+#define GPIO98_USB_P2_6		MFP_CFG(GPIO98, AF2)
+#define GPIO99_USB_P2_1		MFP_CFG(GPIO99, AF2)
+#define GPIO100_USB_P2_4	MFP_CFG(GPIO100, AF2)
+#define GPIO101_USB_P2_8	MFP_CFG(GPIO101, AF2)
+#define GPIO102_USB_P2_3	MFP_CFG(GPIO102, AF2)
+#define GPIO103_USB_P2_5	MFP_CFG(GPIO103, AF2)
+#define GPIO104_USB_P2_7	MFP_CFG(GPIO104, AF2)
+
+/* USB P3 */
+#define GPIO75_USB_P3_1		MFP_CFG(GPIO75, AF2)
+#define GPIO76_USB_P3_2		MFP_CFG(GPIO76, AF2)
+#define GPIO77_USB_P3_3		MFP_CFG(GPIO77, AF2)
+#define GPIO78_USB_P3_4		MFP_CFG(GPIO78, AF2)
+#define GPIO79_USB_P3_5		MFP_CFG(GPIO79, AF2)
+#define GPIO80_USB_P3_6		MFP_CFG(GPIO80, AF2)
+
+#define GPIO13_CHOUT0		MFP_CFG(GPIO13, AF6)
+#define GPIO14_CHOUT1		MFP_CFG(GPIO14, AF6)
+
+#define GPIO2_RDY		MFP_CFG(GPIO2, AF1)
+#define GPIO5_NPIOR		MFP_CFG(GPIO5, AF3)
+
+#define GPIO11_PWM0_OUT		MFP_CFG(GPIO11, AF1)
+#define GPIO12_PWM1_OUT		MFP_CFG(GPIO12, AF1)
+#define GPIO13_PWM2_OUT		MFP_CFG(GPIO13, AF1)
+#define GPIO14_PWM3_OUT		MFP_CFG(GPIO14, AF1)
+
+#endif /* __ASM_ARCH_MFP_PXA320_H */
diff --git a/include/asm-arm/arch-pxa/mfp-pxa3xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
similarity index 100%
rename from include/asm-arm/arch-pxa/mfp-pxa3xx.h
rename to arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
new file mode 100644
index 0000000..fabd9b4
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
@@ -0,0 +1,491 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+ *
+ * PXA930 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA9xx_H
+#define __ASM_ARCH_MFP_PXA9xx_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+
+/* GPIO */
+#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
+#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
+#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
+#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
+
+#define GSIM_UCLK_GPIO_79	MFP_CFG(GSIM_UCLK, AF0)
+#define GSIM_UIO_GPIO_80	MFP_CFG(GSIM_UIO, AF0)
+#define GSIM_nURST_GPIO_81	MFP_CFG(GSIM_nURST, AF0)
+#define GSIM_UDET_GPIO_82	MFP_CFG(GSIM_UDET, AF0)
+
+#define DF_IO15_GPIO_28		MFP_CFG(DF_IO15, AF0)
+#define DF_IO14_GPIO_29		MFP_CFG(DF_IO14, AF0)
+#define DF_IO13_GPIO_30		MFP_CFG(DF_IO13, AF0)
+#define DF_IO12_GPIO_31		MFP_CFG(DF_IO12, AF0)
+#define DF_IO11_GPIO_32		MFP_CFG(DF_IO11, AF0)
+#define DF_IO10_GPIO_33		MFP_CFG(DF_IO10, AF0)
+#define DF_IO9_GPIO_34		MFP_CFG(DF_IO9, AF0)
+#define DF_IO8_GPIO_35		MFP_CFG(DF_IO8, AF0)
+#define DF_IO7_GPIO_36		MFP_CFG(DF_IO7, AF0)
+#define DF_IO6_GPIO_37		MFP_CFG(DF_IO6, AF0)
+#define DF_IO5_GPIO_38		MFP_CFG(DF_IO5, AF0)
+#define DF_IO4_GPIO_39		MFP_CFG(DF_IO4, AF0)
+#define DF_IO3_GPIO_40		MFP_CFG(DF_IO3, AF0)
+#define DF_IO2_GPIO_41		MFP_CFG(DF_IO2, AF0)
+#define DF_IO1_GPIO_42		MFP_CFG(DF_IO1, AF0)
+#define DF_IO0_GPIO_43		MFP_CFG(DF_IO0, AF0)
+#define DF_nCS0_GPIO_44		MFP_CFG(DF_nCS0, AF0)
+#define DF_nCS1_GPIO_45		MFP_CFG(DF_nCS1, AF0)
+#define DF_nWE_GPIO_46		MFP_CFG(DF_nWE, AF0)
+#define DF_nRE_nOE_GPIO_47	MFP_CFG(DF_nRE_nOE, AF0)
+#define DF_CLE_nOE_GPIO_48	MFP_CFG(DF_CLE_nOE, AF0)
+#define DF_nADV1_ALE_GPIO_49	MFP_CFG(DF_nADV1_ALE, AF0)
+#define DF_nADV2_ALE_GPIO_50	MFP_CFG(DF_nADV2_ALE, AF0)
+#define DF_INT_RnB_GPIO_51	MFP_CFG(DF_INT_RnB, AF0)
+#define DF_SCLK_E_GPIO_52	MFP_CFG(DF_SCLK_E, AF0)
+
+#define DF_ADDR0_GPIO_53	MFP_CFG(DF_ADDR0, AF0)
+#define DF_ADDR1_GPIO_54	MFP_CFG(DF_ADDR1, AF0)
+#define DF_ADDR2_GPIO_55	MFP_CFG(DF_ADDR2, AF0)
+#define DF_ADDR3_GPIO_56	MFP_CFG(DF_ADDR3, AF0)
+#define nXCVREN_GPIO_57		MFP_CFG(nXCVREN, AF0)
+#define nLUA_GPIO_58		MFP_CFG(nLUA, AF0)
+#define nLLA_GPIO_59		MFP_CFG(nLLA, AF0)
+#define nBE0_GPIO_60		MFP_CFG(nBE0, AF0)
+#define nBE1_GPIO_61		MFP_CFG(nBE1, AF0)
+#define RDY_GPIO_62		MFP_CFG(RDY, AF0)
+
+/* Chip Select */
+#define DF_nCS0_nCS2		MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH)
+#define DF_nCS1_nCS3		MFP_CFG_LPM(DF_nCS1, AF3, PULL_HIGH)
+
+/* AC97 */
+#define GPIO83_BAC97_SYSCLK	MFP_CFG(GPIO83, AF3)
+#define GPIO84_BAC97_SDATA_IN0	MFP_CFG(GPIO84, AF3)
+#define GPIO85_BAC97_BITCLK	MFP_CFG(GPIO85, AF3)
+#define GPIO86_BAC97_nRESET	MFP_CFG(GPIO86, AF3)
+#define GPIO87_BAC97_SYNC	MFP_CFG(GPIO87, AF3)
+#define GPIO88_BAC97_SDATA_OUT	MFP_CFG(GPIO88, AF3)
+
+/* I2C */
+#define GPIO39_CI2C_SCL		MFP_CFG_LPM(GPIO39, AF3, PULL_HIGH)
+#define GPIO40_CI2C_SDA		MFP_CFG_LPM(GPIO40, AF3, PULL_HIGH)
+
+#define GPIO51_CI2C_SCL		MFP_CFG_LPM(GPIO51, AF3, PULL_HIGH)
+#define GPIO52_CI2C_SDA		MFP_CFG_LPM(GPIO52, AF3, PULL_HIGH)
+
+#define GPIO63_CI2C_SCL		MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH)
+#define GPIO64_CI2C_SDA		MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH)
+
+#define GPIO77_CI2C_SCL		MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH)
+#define GPIO78_CI2C_SDA		MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH)
+
+#define GPIO89_CI2C_SCL		MFP_CFG_LPM(GPIO89, AF1, PULL_HIGH)
+#define GPIO90_CI2C_SDA		MFP_CFG_LPM(GPIO90, AF1, PULL_HIGH)
+
+#define GPIO95_CI2C_SCL		MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_CI2C_SDA		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+
+#define GPIO97_CI2C_SCL		MFP_CFG_LPM(GPIO97, AF3, PULL_HIGH)
+#define GPIO98_CI2C_SDA		MFP_CFG_LPM(GPIO98, AF3, PULL_HIGH)
+
+/* QCI */
+#define GPIO63_CI_DD_9		MFP_CFG_LPM(GPIO63, AF1, PULL_LOW)
+#define GPIO64_CI_DD_8		MFP_CFG_LPM(GPIO64, AF1, PULL_LOW)
+#define GPIO65_CI_DD_7		MFP_CFG_LPM(GPIO65, AF1, PULL_LOW)
+#define GPIO66_CI_DD_6		MFP_CFG_LPM(GPIO66, AF1, PULL_LOW)
+#define GPIO67_CI_DD_5		MFP_CFG_LPM(GPIO67, AF1, PULL_LOW)
+#define GPIO68_CI_DD_4		MFP_CFG_LPM(GPIO68, AF1, PULL_LOW)
+#define GPIO69_CI_DD_3		MFP_CFG_LPM(GPIO69, AF1, PULL_LOW)
+#define GPIO70_CI_DD_2		MFP_CFG_LPM(GPIO70, AF1, PULL_LOW)
+#define GPIO71_CI_DD_1		MFP_CFG_LPM(GPIO71, AF1, PULL_LOW)
+#define GPIO72_CI_DD_0		MFP_CFG_LPM(GPIO72, AF1, PULL_LOW)
+#define GPIO73_CI_HSYNC		MFP_CFG_LPM(GPIO73, AF1, PULL_LOW)
+#define GPIO74_CI_VSYNC		MFP_CFG_LPM(GPIO74, AF1, PULL_LOW)
+#define GPIO75_CI_MCLK		MFP_CFG_LPM(GPIO75, AF1, PULL_LOW)
+#define GPIO76_CI_PCLK		MFP_CFG_LPM(GPIO76, AF1, PULL_LOW)
+
+/* KEYPAD */
+#define GPIO4_KP_DKIN_4		MFP_CFG_LPM(GPIO4, AF3, FLOAT)
+#define GPIO5_KP_DKIN_5		MFP_CFG_LPM(GPIO5, AF3, FLOAT)
+#define GPIO6_KP_DKIN_6		MFP_CFG_LPM(GPIO6, AF3, FLOAT)
+#define GPIO7_KP_DKIN_7		MFP_CFG_LPM(GPIO7, AF3, FLOAT)
+#define GPIO8_KP_DKIN_4		MFP_CFG_LPM(GPIO8, AF3, FLOAT)
+#define GPIO9_KP_DKIN_5		MFP_CFG_LPM(GPIO9, AF3, FLOAT)
+#define GPIO10_KP_DKIN_6	MFP_CFG_LPM(GPIO10, AF3, FLOAT)
+#define GPIO11_KP_DKIN_7	MFP_CFG_LPM(GPIO11, AF3, FLOAT)
+
+#define GPIO12_KP_DKIN_0	MFP_CFG_LPM(GPIO12, AF2, FLOAT)
+#define GPIO13_KP_DKIN_1	MFP_CFG_LPM(GPIO13, AF2, FLOAT)
+#define GPIO14_KP_DKIN_2	MFP_CFG_LPM(GPIO14, AF2, FLOAT)
+#define GPIO15_KP_DKIN_3	MFP_CFG_LPM(GPIO15, AF2, FLOAT)
+
+#define GPIO41_KP_DKIN_0	MFP_CFG_LPM(GPIO41, AF2, FLOAT)
+#define GPIO42_KP_DKIN_1	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO43_KP_DKIN_2	MFP_CFG_LPM(GPIO43, AF2, FLOAT)
+#define GPIO44_KP_DKIN_3	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO41_KP_DKIN_4	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
+#define GPIO42_KP_DKIN_5	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
+
+#define GPIO0_KP_MKIN_0		MFP_CFG_LPM(GPIO0, AF1, FLOAT)
+#define GPIO2_KP_MKIN_1		MFP_CFG_LPM(GPIO2, AF1, FLOAT)
+#define GPIO4_KP_MKIN_2		MFP_CFG_LPM(GPIO4, AF1, FLOAT)
+#define GPIO6_KP_MKIN_3		MFP_CFG_LPM(GPIO6, AF1, FLOAT)
+#define GPIO8_KP_MKIN_4		MFP_CFG_LPM(GPIO8, AF1, FLOAT)
+#define GPIO10_KP_MKIN_5	MFP_CFG_LPM(GPIO10, AF1, FLOAT)
+#define GPIO12_KP_MKIN_6	MFP_CFG_LPM(GPIO12, AF1, FLOAT)
+#define GPIO14_KP_MKIN_7	MFP_CFG(GPIO14, AF1)
+#define GPIO35_KP_MKIN_5	MFP_CFG(GPIO35, AF4)
+
+#define GPIO1_KP_MKOUT_0	MFP_CFG_LPM(GPIO1, AF1, DRIVE_HIGH)
+#define GPIO3_KP_MKOUT_1	MFP_CFG_LPM(GPIO3, AF1, DRIVE_HIGH)
+#define GPIO5_KP_MKOUT_2	MFP_CFG_LPM(GPIO5, AF1, DRIVE_HIGH)
+#define GPIO7_KP_MKOUT_3	MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH)
+#define GPIO9_KP_MKOUT_4	MFP_CFG_LPM(GPIO9, AF1, DRIVE_HIGH)
+#define GPIO11_KP_MKOUT_5	MFP_CFG_LPM(GPIO11, AF1, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_6	MFP_CFG_LPM(GPIO13, AF1, DRIVE_HIGH)
+#define GPIO15_KP_MKOUT_7	MFP_CFG_LPM(GPIO15, AF1, DRIVE_HIGH)
+#define GPIO36_KP_MKOUT_5	MFP_CFG_LPM(GPIO36, AF4, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO17_LCD_FCLK_RD	MFP_CFG(GPIO17, AF1)
+#define GPIO18_LCD_LCLK_A0	MFP_CFG(GPIO18, AF1)
+#define GPIO19_LCD_PCLK_WR	MFP_CFG(GPIO19, AF1)
+#define GPIO20_LCD_BIAS		MFP_CFG(GPIO20, AF1)
+#define GPIO21_LCD_CS		MFP_CFG(GPIO21, AF1)
+#define GPIO22_LCD_CS2		MFP_CFG(GPIO22, AF2)
+#define GPIO22_LCD_VSYNC	MFP_CFG(GPIO22, AF1)
+#define GPIO23_LCD_DD0		MFP_CFG(GPIO23, AF1)
+#define GPIO24_LCD_DD1		MFP_CFG(GPIO24, AF1)
+#define GPIO25_LCD_DD2		MFP_CFG(GPIO25, AF1)
+#define GPIO26_LCD_DD3		MFP_CFG(GPIO26, AF1)
+#define GPIO27_LCD_DD4		MFP_CFG(GPIO27, AF1)
+#define GPIO28_LCD_DD5		MFP_CFG(GPIO28, AF1)
+#define GPIO29_LCD_DD6		MFP_CFG(GPIO29, AF1)
+#define GPIO30_LCD_DD7		MFP_CFG(GPIO30, AF1)
+#define GPIO31_LCD_DD8		MFP_CFG(GPIO31, AF1)
+#define GPIO32_LCD_DD9		MFP_CFG(GPIO32, AF1)
+#define GPIO33_LCD_DD10		MFP_CFG(GPIO33, AF1)
+#define GPIO34_LCD_DD11		MFP_CFG(GPIO34, AF1)
+#define GPIO35_LCD_DD12		MFP_CFG(GPIO35, AF1)
+#define GPIO36_LCD_DD13		MFP_CFG(GPIO36, AF1)
+#define GPIO37_LCD_DD14		MFP_CFG(GPIO37, AF1)
+#define GPIO38_LCD_DD15		MFP_CFG(GPIO38, AF1)
+#define GPIO39_LCD_DD16		MFP_CFG(GPIO39, AF1)
+#define GPIO40_LCD_DD17		MFP_CFG(GPIO40, AF1)
+#define GPIO41_LCD_CS2		MFP_CFG(GPIO41, AF3)
+#define GPIO42_LCD_VSYNC2	MFP_CFG(GPIO42, AF3)
+#define GPIO44_LCD_DD7		MFP_CFG(GPIO44, AF1)
+
+/* Mini-LCD */
+#define GPIO17_MLCD_FCLK	MFP_CFG(GPIO17, AF3)
+#define GPIO18_MLCD_LCLK	MFP_CFG(GPIO18, AF3)
+#define GPIO19_MLCD_PCLK	MFP_CFG(GPIO19, AF3)
+#define GPIO20_MLCD_BIAS	MFP_CFG(GPIO20, AF3)
+#define GPIO23_MLCD_DD0		MFP_CFG(GPIO23, AF3)
+#define GPIO24_MLCD_DD1		MFP_CFG(GPIO24, AF3)
+#define GPIO25_MLCD_DD2		MFP_CFG(GPIO25, AF3)
+#define GPIO26_MLCD_DD3		MFP_CFG(GPIO26, AF3)
+#define GPIO27_MLCD_DD4		MFP_CFG(GPIO27, AF3)
+#define GPIO28_MLCD_DD5		MFP_CFG(GPIO28, AF3)
+#define GPIO29_MLCD_DD6		MFP_CFG(GPIO29, AF3)
+#define GPIO30_MLCD_DD7		MFP_CFG(GPIO30, AF3)
+#define GPIO31_MLCD_DD8		MFP_CFG(GPIO31, AF3)
+#define GPIO32_MLCD_DD9		MFP_CFG(GPIO32, AF3)
+#define GPIO33_MLCD_DD10	MFP_CFG(GPIO33, AF3)
+#define GPIO34_MLCD_DD11	MFP_CFG(GPIO34, AF3)
+#define GPIO35_MLCD_DD12	MFP_CFG(GPIO35, AF3)
+#define GPIO36_MLCD_DD13	MFP_CFG(GPIO36, AF3)
+#define GPIO37_MLCD_DD14	MFP_CFG(GPIO37, AF3)
+#define GPIO38_MLCD_DD15	MFP_CFG(GPIO38, AF3)
+#define GPIO44_MLCD_DD7		MFP_CFG(GPIO44, AF5)
+
+/* MMC1 */
+#define GPIO10_MMC1_DAT3	MFP_CFG(GPIO10, AF4)
+#define GPIO11_MMC1_DAT2	MFP_CFG(GPIO11, AF4)
+#define GPIO12_MMC1_DAT1	MFP_CFG(GPIO12, AF4)
+#define GPIO13_MMC1_DAT0	MFP_CFG(GPIO13, AF4)
+#define GPIO14_MMC1_CMD		MFP_CFG(GPIO14, AF4)
+#define GPIO15_MMC1_CLK		MFP_CFG(GPIO15, AF4)
+#define GPIO55_MMC1_CMD		MFP_CFG(GPIO55, AF3)
+#define GPIO56_MMC1_CLK		MFP_CFG(GPIO56, AF3)
+#define GPIO57_MMC1_DAT0	MFP_CFG(GPIO57, AF3)
+#define GPIO58_MMC1_DAT1	MFP_CFG(GPIO58, AF3)
+#define GPIO59_MMC1_DAT2	MFP_CFG(GPIO59, AF3)
+#define GPIO60_MMC1_DAT3	MFP_CFG(GPIO60, AF3)
+
+#define DF_ADDR0_MMC1_CLK	MFP_CFG(DF_ADDR0, AF2)
+#define DF_ADDR1_MMC1_CMD	MFP_CFG(DF_ADDR1, AF2)
+#define DF_ADDR2_MMC1_DAT0	MFP_CFG(DF_ADDR2, AF2)
+#define DF_ADDR3_MMC1_DAT1	MFP_CFG(DF_ADDR3, AF3)
+#define nXCVREN_MMC1_DAT2	MFP_CFG(nXCVREN, AF2)
+
+/* MMC2 */
+#define GPIO31_MMC2_CMD		MFP_CFG(GPIO31, AF7)
+#define GPIO32_MMC2_CLK		MFP_CFG(GPIO32, AF7)
+#define GPIO33_MMC2_DAT0	MFP_CFG(GPIO33, AF7)
+#define GPIO34_MMC2_DAT1	MFP_CFG(GPIO34, AF7)
+#define GPIO35_MMC2_DAT2	MFP_CFG(GPIO35, AF7)
+#define GPIO36_MMC2_DAT3	MFP_CFG(GPIO36, AF7)
+
+#define GPIO101_MMC2_DAT3	MFP_CFG(GPIO101, AF1)
+#define GPIO102_MMC2_DAT2	MFP_CFG(GPIO102, AF1)
+#define GPIO103_MMC2_DAT1	MFP_CFG(GPIO103, AF1)
+#define GPIO104_MMC2_DAT0	MFP_CFG(GPIO104, AF1)
+#define GPIO105_MMC2_CMD	MFP_CFG(GPIO105, AF1)
+#define GPIO106_MMC2_CLK	MFP_CFG(GPIO106, AF1)
+
+#define DF_IO10_MMC2_DAT3	MFP_CFG(DF_IO10, AF3)
+#define DF_IO11_MMC2_DAT2	MFP_CFG(DF_IO11, AF3)
+#define DF_IO12_MMC2_DAT1	MFP_CFG(DF_IO12, AF3)
+#define DF_IO13_MMC2_DAT0	MFP_CFG(DF_IO13, AF3)
+#define DF_IO14_MMC2_CLK	MFP_CFG(DF_IO14, AF3)
+#define DF_IO15_MMC2_CMD	MFP_CFG(DF_IO15, AF3)
+
+/* BSSP1 */
+#define GPIO12_BSSP1_CLK	MFP_CFG(GPIO12, AF3)
+#define GPIO13_BSSP1_FRM	MFP_CFG(GPIO13, AF3)
+#define GPIO14_BSSP1_RXD	MFP_CFG(GPIO14, AF3)
+#define GPIO15_BSSP1_TXD	MFP_CFG(GPIO15, AF3)
+#define GPIO97_BSSP1_CLK	MFP_CFG(GPIO97, AF5)
+#define GPIO98_BSSP1_FRM	MFP_CFG(GPIO98, AF5)
+
+/* BSSP2 */
+#define GPIO84_BSSP2_SDATA_IN	MFP_CFG(GPIO84, AF1)
+#define GPIO85_BSSP2_BITCLK	MFP_CFG(GPIO85, AF1)
+#define GPIO86_BSSP2_SYSCLK	MFP_CFG(GPIO86, AF1)
+#define GPIO87_BSSP2_SYNC	MFP_CFG(GPIO87, AF1)
+#define GPIO88_BSSP2_DATA_OUT	MFP_CFG(GPIO88, AF1)
+#define GPIO86_BSSP2_SDATA_IN	MFP_CFG(GPIO86, AF4)
+
+/* BSSP3 */
+#define GPIO79_BSSP3_CLK	MFP_CFG(GPIO79, AF1)
+#define GPIO80_BSSP3_FRM	MFP_CFG(GPIO80, AF1)
+#define GPIO81_BSSP3_TXD	MFP_CFG(GPIO81, AF1)
+#define GPIO82_BSSP3_RXD	MFP_CFG(GPIO82, AF1)
+#define GPIO83_BSSP3_SYSCLK	MFP_CFG(GPIO83, AF1)
+
+/* BSSP4 */
+#define GPIO43_BSSP4_CLK	MFP_CFG(GPIO43, AF4)
+#define GPIO44_BSSP4_FRM	MFP_CFG(GPIO44, AF4)
+#define GPIO45_BSSP4_TXD	MFP_CFG(GPIO45, AF4)
+#define GPIO46_BSSP4_RXD	MFP_CFG(GPIO46, AF4)
+
+#define GPIO51_BSSP4_CLK	MFP_CFG(GPIO51, AF4)
+#define GPIO52_BSSP4_FRM	MFP_CFG(GPIO52, AF4)
+#define GPIO53_BSSP4_TXD	MFP_CFG(GPIO53, AF4)
+#define GPIO54_BSSP4_RXD	MFP_CFG(GPIO54, AF4)
+
+/* GSSP1 */
+#define GPIO79_GSSP1_CLK	MFP_CFG(GPIO79, AF2)
+#define GPIO80_GSSP1_FRM	MFP_CFG(GPIO80, AF2)
+#define GPIO81_GSSP1_TXD	MFP_CFG(GPIO81, AF2)
+#define GPIO82_GSSP1_RXD	MFP_CFG(GPIO82, AF2)
+#define GPIO83_GSSP1_SYSCLK	MFP_CFG(GPIO83, AF2)
+
+#define GPIO93_GSSP1_CLK	MFP_CFG(GPIO93, AF4)
+#define GPIO94_GSSP1_FRM	MFP_CFG(GPIO94, AF4)
+#define GPIO95_GSSP1_TXD	MFP_CFG(GPIO95, AF4)
+#define GPIO96_GSSP1_RXD	MFP_CFG(GPIO96, AF4)
+
+/* GSSP2 */
+#define GPIO47_GSSP2_CLK	MFP_CFG(GPIO47, AF4)
+#define GPIO48_GSSP2_FRM	MFP_CFG(GPIO48, AF4)
+#define GPIO49_GSSP2_RXD	MFP_CFG(GPIO49, AF4)
+#define GPIO50_GSSP2_TXD	MFP_CFG(GPIO50, AF4)
+
+#define GPIO69_GSSP2_CLK	MFP_CFG(GPIO69, AF4)
+#define GPIO70_GSSP2_FRM	MFP_CFG(GPIO70, AF4)
+#define GPIO71_GSSP2_RXD	MFP_CFG(GPIO71, AF4)
+#define GPIO72_GSSP2_TXD	MFP_CFG(GPIO72, AF4)
+
+#define GPIO84_GSSP2_RXD	MFP_CFG(GPIO84, AF2)
+#define GPIO85_GSSP2_CLK	MFP_CFG(GPIO85, AF2)
+#define GPIO86_GSSP2_SYSCLK	MFP_CFG(GPIO86, AF2)
+#define GPIO87_GSSP2_FRM	MFP_CFG(GPIO87, AF2)
+#define GPIO88_GSSP2_TXD	MFP_CFG(GPIO88, AF2)
+#define GPIO86_GSSP2_RXD	MFP_CFG(GPIO86, AF5)
+
+#define GPIO103_GSSP2_CLK	MFP_CFG(GPIO103, AF2)
+#define GPIO104_GSSP2_FRM	MFP_CFG(GPIO104, AF2)
+#define GPIO105_GSSP2_RXD	MFP_CFG(GPIO105, AF2)
+#define GPIO106_GSSP2_TXD	MFP_CFG(GPIO106, AF2)
+
+/* UART1 - FFUART */
+#define GPIO47_UART1_DSR_N	MFP_CFG(GPIO47, AF1)
+#define GPIO48_UART1_DTR_N	MFP_CFG(GPIO48, AF1)
+#define GPIO49_UART1_RI		MFP_CFG(GPIO49, AF1)
+#define GPIO50_UART1_DCD	MFP_CFG(GPIO50, AF1)
+#define GPIO51_UART1_CTS	MFP_CFG(GPIO51, AF1)
+#define GPIO52_UART1_RTS	MFP_CFG(GPIO52, AF1)
+#define GPIO53_UART1_RXD	MFP_CFG(GPIO53, AF1)
+#define GPIO54_UART1_TXD	MFP_CFG(GPIO54, AF1)
+
+#define GPIO63_UART1_TXD	MFP_CFG(GPIO63, AF2)
+#define GPIO64_UART1_RXD	MFP_CFG(GPIO64, AF2)
+#define GPIO65_UART1_DSR	MFP_CFG(GPIO65, AF2)
+#define GPIO66_UART1_DTR	MFP_CFG(GPIO66, AF2)
+#define GPIO67_UART1_RI		MFP_CFG(GPIO67, AF2)
+#define GPIO68_UART1_DCD	MFP_CFG(GPIO68, AF2)
+#define GPIO69_UART1_CTS	MFP_CFG(GPIO69, AF2)
+#define GPIO70_UART1_RTS	MFP_CFG(GPIO70, AF2)
+
+/* UART2 - BTUART */
+#define GPIO91_UART2_RXD	MFP_CFG(GPIO91, AF1)
+#define GPIO92_UART2_TXD	MFP_CFG(GPIO92, AF1)
+#define GPIO93_UART2_CTS	MFP_CFG(GPIO93, AF1)
+#define GPIO94_UART2_RTS	MFP_CFG(GPIO94, AF1)
+
+/* UART3 - STUART */
+#define GPIO43_UART3_RTS	MFP_CFG(GPIO43, AF3)
+#define GPIO44_UART3_CTS	MFP_CFG(GPIO44, AF3)
+#define GPIO45_UART3_RXD	MFP_CFG(GPIO45, AF3)
+#define GPIO46_UART3_TXD	MFP_CFG(GPIO46, AF3)
+
+#define GPIO75_UART3_RTS	MFP_CFG(GPIO75, AF5)
+#define GPIO76_UART3_CTS	MFP_CFG(GPIO76, AF5)
+#define GPIO77_UART3_TXD	MFP_CFG(GPIO77, AF5)
+#define GPIO78_UART3_RXD	MFP_CFG(GPIO78, AF5)
+
+/* DFI */
+#define DF_IO0_DF_IO0		MFP_CFG(DF_IO0, AF2)
+#define DF_IO1_DF_IO1		MFP_CFG(DF_IO1, AF2)
+#define DF_IO2_DF_IO2		MFP_CFG(DF_IO2, AF2)
+#define DF_IO3_DF_IO3		MFP_CFG(DF_IO3, AF2)
+#define DF_IO4_DF_IO4		MFP_CFG(DF_IO4, AF2)
+#define DF_IO5_DF_IO5		MFP_CFG(DF_IO5, AF2)
+#define DF_IO6_DF_IO6		MFP_CFG(DF_IO6, AF2)
+#define DF_IO7_DF_IO7		MFP_CFG(DF_IO7, AF2)
+#define DF_IO8_DF_IO8		MFP_CFG(DF_IO8, AF2)
+#define DF_IO9_DF_IO9		MFP_CFG(DF_IO9, AF2)
+#define DF_IO10_DF_IO10		MFP_CFG(DF_IO10, AF2)
+#define DF_IO11_DF_IO11		MFP_CFG(DF_IO11, AF2)
+#define DF_IO12_DF_IO12		MFP_CFG(DF_IO12, AF2)
+#define DF_IO13_DF_IO13		MFP_CFG(DF_IO13, AF2)
+#define DF_IO14_DF_IO14		MFP_CFG(DF_IO14, AF2)
+#define DF_IO15_DF_IO15		MFP_CFG(DF_IO15, AF2)
+#define DF_nADV1_ALE_DF_nADV1	MFP_CFG(DF_nADV1_ALE, AF2)
+#define DF_nADV2_ALE_DF_nADV2	MFP_CFG(DF_nADV2_ALE, AF2)
+#define DF_nCS0_DF_nCS0		MFP_CFG(DF_nCS0, AF2)
+#define DF_nCS1_DF_nCS1		MFP_CFG(DF_nCS1, AF2)
+#define DF_nRE_nOE_DF_nOE	MFP_CFG(DF_nRE_nOE, AF2)
+#define DF_nWE_DF_nWE		MFP_CFG(DF_nWE, AF2)
+
+/* DFI - NAND */
+#define DF_CLE_nOE_ND_CLE	MFP_CFG_LPM(DF_CLE_nOE, AF1, PULL_HIGH)
+#define DF_INT_RnB_ND_INT_RnB	MFP_CFG_LPM(DF_INT_RnB, AF1, PULL_LOW)
+#define DF_IO0_ND_IO0		MFP_CFG_LPM(DF_IO0, AF1, PULL_LOW)
+#define DF_IO1_ND_IO1		MFP_CFG_LPM(DF_IO1, AF1, PULL_LOW)
+#define DF_IO2_ND_IO2		MFP_CFG_LPM(DF_IO2, AF1, PULL_LOW)
+#define DF_IO3_ND_IO3		MFP_CFG_LPM(DF_IO3, AF1, PULL_LOW)
+#define DF_IO4_ND_IO4		MFP_CFG_LPM(DF_IO4, AF1, PULL_LOW)
+#define DF_IO5_ND_IO5		MFP_CFG_LPM(DF_IO5, AF1, PULL_LOW)
+#define DF_IO6_ND_IO6		MFP_CFG_LPM(DF_IO6, AF1, PULL_LOW)
+#define DF_IO7_ND_IO7		MFP_CFG_LPM(DF_IO7, AF1, PULL_LOW)
+#define DF_IO8_ND_IO8		MFP_CFG_LPM(DF_IO8, AF1, PULL_LOW)
+#define DF_IO9_ND_IO9		MFP_CFG_LPM(DF_IO9, AF1, PULL_LOW)
+#define DF_IO10_ND_IO10		MFP_CFG_LPM(DF_IO10, AF1, PULL_LOW)
+#define DF_IO11_ND_IO11		MFP_CFG_LPM(DF_IO11, AF1, PULL_LOW)
+#define DF_IO12_ND_IO12		MFP_CFG_LPM(DF_IO12, AF1, PULL_LOW)
+#define DF_IO13_ND_IO13		MFP_CFG_LPM(DF_IO13, AF1, PULL_LOW)
+#define DF_IO14_ND_IO14		MFP_CFG_LPM(DF_IO14, AF1, PULL_LOW)
+#define DF_IO15_ND_IO15		MFP_CFG_LPM(DF_IO15, AF1, PULL_LOW)
+#define DF_nADV1_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV1_ALE, AF1, PULL_HIGH)
+#define DF_nADV2_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV2_ALE, AF1, PULL_HIGH)
+#define	DF_nADV2_ALE_nCS3	MFP_CFG_LPM(DF_nADV2_ALE, AF3, PULL_HIGH)
+#define DF_nCS0_ND_nCS0		MFP_CFG_LPM(DF_nCS0, AF1, PULL_HIGH)
+#define DF_nCS1_ND_nCS1		MFP_CFG_LPM(DF_nCS1, AF1, PULL_HIGH)
+#define DF_nRE_nOE_ND_nRE	MFP_CFG_LPM(DF_nRE_nOE, AF1, PULL_HIGH)
+#define DF_nWE_ND_nWE		MFP_CFG_LPM(DF_nWE, AF1, PULL_HIGH)
+
+/* PWM */
+#define GPIO41_PWM0		MFP_CFG_LPM(GPIO41, AF1, PULL_LOW)
+#define GPIO42_PWM1		MFP_CFG_LPM(GPIO42, AF1, PULL_LOW)
+#define GPIO43_PWM3		MFP_CFG_LPM(GPIO43, AF1, PULL_LOW)
+#define GPIO20_PWM0		MFP_CFG_LPM(GPIO20, AF2, PULL_LOW)
+#define GPIO21_PWM2		MFP_CFG_LPM(GPIO21, AF3, PULL_LOW)
+#define GPIO22_PWM3		MFP_CFG_LPM(GPIO22, AF3, PULL_LOW)
+
+/* CIR */
+#define GPIO46_CIR_OUT		MFP_CFG(GPIO46, AF1)
+#define GPIO77_CIR_OUT		MFP_CFG(GPIO77, AF3)
+
+/* USB P2 */
+#define GPIO0_USB_P2_7		MFP_CFG(GPIO0, AF3)
+#define GPIO15_USB_P2_7		MFP_CFG(GPIO15, AF5)
+#define GPIO16_USB_P2_7		MFP_CFG(GPIO16, AF2)
+#define GPIO48_USB_P2_7		MFP_CFG(GPIO48, AF7)
+#define GPIO49_USB_P2_7		MFP_CFG(GPIO49, AF6)
+#define DF_IO9_USB_P2_7		MFP_CFG(DF_IO9, AF3)
+
+#define GPIO48_USB_P2_8		MFP_CFG(GPIO48, AF2)
+#define GPIO50_USB_P2_7		MFP_CFG_X(GPIO50, AF2, DS02X, FLOAT)
+#define GPIO51_USB_P2_5		MFP_CFG(GPIO51, AF2)
+#define GPIO47_USB_P2_4		MFP_CFG(GPIO47, AF2)
+#define GPIO53_USB_P2_3		MFP_CFG(GPIO53, AF2)
+#define GPIO54_USB_P2_6		MFP_CFG(GPIO54, AF2)
+#define GPIO49_USB_P2_2		MFP_CFG(GPIO49, AF2)
+#define GPIO52_USB_P2_1		MFP_CFG(GPIO52, AF2)
+
+#define GPIO63_USB_P2_8		MFP_CFG(GPIO63, AF3)
+#define GPIO64_USB_P2_7		MFP_CFG(GPIO64, AF3)
+#define GPIO65_USB_P2_6		MFP_CFG(GPIO65, AF3)
+#define GPIO66_USG_P2_5		MFP_CFG(GPIO66, AF3)
+#define GPIO67_USB_P2_4		MFP_CFG(GPIO67, AF3)
+#define GPIO68_USB_P2_3		MFP_CFG(GPIO68, AF3)
+#define GPIO69_USB_P2_2		MFP_CFG(GPIO69, AF3)
+#define GPIO70_USB_P2_1		MFP_CFG(GPIO70, AF3)
+
+/* ULPI */
+#define GPIO31_USB_ULPI_D0	MFP_CFG(GPIO31, AF4)
+#define GPIO30_USB_ULPI_D1	MFP_CFG(GPIO30, AF7)
+#define GPIO33_USB_ULPI_D2	MFP_CFG(GPIO33, AF5)
+#define GPIO34_USB_ULPI_D3	MFP_CFG(GPIO34, AF5)
+#define GPIO35_USB_ULPI_D4	MFP_CFG(GPIO35, AF5)
+#define GPIO36_USB_ULPI_D5	MFP_CFG(GPIO36, AF5)
+#define GPIO41_USB_ULPI_D6	MFP_CFG(GPIO41, AF5)
+#define GPIO42_USB_ULPI_D7	MFP_CFG(GPIO42, AF5)
+#define GPIO37_USB_ULPI_DIR	MFP_CFG(GPIO37, AF4)
+#define GPIO38_USB_ULPI_CLK	MFP_CFG(GPIO38, AF4)
+#define GPIO39_USB_ULPI_STP	MFP_CFG(GPIO39, AF4)
+#define GPIO40_USB_ULPI_NXT	MFP_CFG(GPIO40, AF4)
+
+#define GPIO3_CLK26MOUTDMD	MFP_CFG(GPIO3, AF3)
+#define GPIO40_CLK26MOUTDMD	MFP_CFG(GPIO40, AF7)
+#define GPIO94_CLK26MOUTDMD	MFP_CFG(GPIO94, AF5)
+#define GPIO104_CLK26MOUTDMD	MFP_CFG(GPIO104, AF4)
+#define DF_ADDR1_CLK26MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
+#define DF_ADDR3_CLK26MOUTDMD	MFP_CFG(DF_ADDR3, AF3)
+
+#define GPIO14_CLK26MOUT	MFP_CFG(GPIO14, AF5)
+#define GPIO38_CLK26MOUT	MFP_CFG(GPIO38, AF7)
+#define GPIO92_CLK26MOUT	MFP_CFG(GPIO92, AF5)
+#define GPIO105_CLK26MOUT	MFP_CFG(GPIO105, AF4)
+
+#define GPIO2_CLK13MOUTDMD	MFP_CFG(GPIO2, AF3)
+#define GPIO39_CLK13MOUTDMD	MFP_CFG(GPIO39, AF7)
+#define GPIO50_CLK13MOUTDMD	MFP_CFG(GPIO50, AF3)
+#define GPIO93_CLK13MOUTDMD	MFP_CFG(GPIO93, AF5)
+#define GPIO103_CLK13MOUTDMD	MFP_CFG(GPIO103, AF4)
+#define DF_ADDR2_CLK13MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
+
+/* 1 wire */
+#define GPIO95_OW_DQ_IN		MFP_CFG(GPIO95, AF5)
+
+#endif /* __ASM_ARCH_MFP_PXA9xx_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h
new file mode 100644
index 0000000..8769567
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp.h
@@ -0,0 +1,319 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp.h
+ *
+ * Multi-Function Pin Definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * 2007-8-21: eric miao <eric.miao@marvell.com>
+ *            initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_H
+#define __ASM_ARCH_MFP_H
+
+#define mfp_to_gpio(m)	((m) % 128)
+
+/* list of all the configurable MFP pins */
+enum {
+	MFP_PIN_INVALID = -1,
+
+	MFP_PIN_GPIO0 = 0,
+	MFP_PIN_GPIO1,
+	MFP_PIN_GPIO2,
+	MFP_PIN_GPIO3,
+	MFP_PIN_GPIO4,
+	MFP_PIN_GPIO5,
+	MFP_PIN_GPIO6,
+	MFP_PIN_GPIO7,
+	MFP_PIN_GPIO8,
+	MFP_PIN_GPIO9,
+	MFP_PIN_GPIO10,
+	MFP_PIN_GPIO11,
+	MFP_PIN_GPIO12,
+	MFP_PIN_GPIO13,
+	MFP_PIN_GPIO14,
+	MFP_PIN_GPIO15,
+	MFP_PIN_GPIO16,
+	MFP_PIN_GPIO17,
+	MFP_PIN_GPIO18,
+	MFP_PIN_GPIO19,
+	MFP_PIN_GPIO20,
+	MFP_PIN_GPIO21,
+	MFP_PIN_GPIO22,
+	MFP_PIN_GPIO23,
+	MFP_PIN_GPIO24,
+	MFP_PIN_GPIO25,
+	MFP_PIN_GPIO26,
+	MFP_PIN_GPIO27,
+	MFP_PIN_GPIO28,
+	MFP_PIN_GPIO29,
+	MFP_PIN_GPIO30,
+	MFP_PIN_GPIO31,
+	MFP_PIN_GPIO32,
+	MFP_PIN_GPIO33,
+	MFP_PIN_GPIO34,
+	MFP_PIN_GPIO35,
+	MFP_PIN_GPIO36,
+	MFP_PIN_GPIO37,
+	MFP_PIN_GPIO38,
+	MFP_PIN_GPIO39,
+	MFP_PIN_GPIO40,
+	MFP_PIN_GPIO41,
+	MFP_PIN_GPIO42,
+	MFP_PIN_GPIO43,
+	MFP_PIN_GPIO44,
+	MFP_PIN_GPIO45,
+	MFP_PIN_GPIO46,
+	MFP_PIN_GPIO47,
+	MFP_PIN_GPIO48,
+	MFP_PIN_GPIO49,
+	MFP_PIN_GPIO50,
+	MFP_PIN_GPIO51,
+	MFP_PIN_GPIO52,
+	MFP_PIN_GPIO53,
+	MFP_PIN_GPIO54,
+	MFP_PIN_GPIO55,
+	MFP_PIN_GPIO56,
+	MFP_PIN_GPIO57,
+	MFP_PIN_GPIO58,
+	MFP_PIN_GPIO59,
+	MFP_PIN_GPIO60,
+	MFP_PIN_GPIO61,
+	MFP_PIN_GPIO62,
+	MFP_PIN_GPIO63,
+	MFP_PIN_GPIO64,
+	MFP_PIN_GPIO65,
+	MFP_PIN_GPIO66,
+	MFP_PIN_GPIO67,
+	MFP_PIN_GPIO68,
+	MFP_PIN_GPIO69,
+	MFP_PIN_GPIO70,
+	MFP_PIN_GPIO71,
+	MFP_PIN_GPIO72,
+	MFP_PIN_GPIO73,
+	MFP_PIN_GPIO74,
+	MFP_PIN_GPIO75,
+	MFP_PIN_GPIO76,
+	MFP_PIN_GPIO77,
+	MFP_PIN_GPIO78,
+	MFP_PIN_GPIO79,
+	MFP_PIN_GPIO80,
+	MFP_PIN_GPIO81,
+	MFP_PIN_GPIO82,
+	MFP_PIN_GPIO83,
+	MFP_PIN_GPIO84,
+	MFP_PIN_GPIO85,
+	MFP_PIN_GPIO86,
+	MFP_PIN_GPIO87,
+	MFP_PIN_GPIO88,
+	MFP_PIN_GPIO89,
+	MFP_PIN_GPIO90,
+	MFP_PIN_GPIO91,
+	MFP_PIN_GPIO92,
+	MFP_PIN_GPIO93,
+	MFP_PIN_GPIO94,
+	MFP_PIN_GPIO95,
+	MFP_PIN_GPIO96,
+	MFP_PIN_GPIO97,
+	MFP_PIN_GPIO98,
+	MFP_PIN_GPIO99,
+	MFP_PIN_GPIO100,
+	MFP_PIN_GPIO101,
+	MFP_PIN_GPIO102,
+	MFP_PIN_GPIO103,
+	MFP_PIN_GPIO104,
+	MFP_PIN_GPIO105,
+	MFP_PIN_GPIO106,
+	MFP_PIN_GPIO107,
+	MFP_PIN_GPIO108,
+	MFP_PIN_GPIO109,
+	MFP_PIN_GPIO110,
+	MFP_PIN_GPIO111,
+	MFP_PIN_GPIO112,
+	MFP_PIN_GPIO113,
+	MFP_PIN_GPIO114,
+	MFP_PIN_GPIO115,
+	MFP_PIN_GPIO116,
+	MFP_PIN_GPIO117,
+	MFP_PIN_GPIO118,
+	MFP_PIN_GPIO119,
+	MFP_PIN_GPIO120,
+	MFP_PIN_GPIO121,
+	MFP_PIN_GPIO122,
+	MFP_PIN_GPIO123,
+	MFP_PIN_GPIO124,
+	MFP_PIN_GPIO125,
+	MFP_PIN_GPIO126,
+	MFP_PIN_GPIO127,
+	MFP_PIN_GPIO0_2,
+	MFP_PIN_GPIO1_2,
+	MFP_PIN_GPIO2_2,
+	MFP_PIN_GPIO3_2,
+	MFP_PIN_GPIO4_2,
+	MFP_PIN_GPIO5_2,
+	MFP_PIN_GPIO6_2,
+	MFP_PIN_GPIO7_2,
+	MFP_PIN_GPIO8_2,
+	MFP_PIN_GPIO9_2,
+	MFP_PIN_GPIO10_2,
+	MFP_PIN_GPIO11_2,
+	MFP_PIN_GPIO12_2,
+	MFP_PIN_GPIO13_2,
+	MFP_PIN_GPIO14_2,
+	MFP_PIN_GPIO15_2,
+	MFP_PIN_GPIO16_2,
+	MFP_PIN_GPIO17_2,
+
+	MFP_PIN_ULPI_STP,
+	MFP_PIN_ULPI_NXT,
+	MFP_PIN_ULPI_DIR,
+
+	MFP_PIN_nXCVREN,
+	MFP_PIN_DF_CLE_nOE,
+	MFP_PIN_DF_nADV1_ALE,
+	MFP_PIN_DF_SCLK_E,
+	MFP_PIN_DF_SCLK_S,
+	MFP_PIN_nBE0,
+	MFP_PIN_nBE1,
+	MFP_PIN_DF_nADV2_ALE,
+	MFP_PIN_DF_INT_RnB,
+	MFP_PIN_DF_nCS0,
+	MFP_PIN_DF_nCS1,
+	MFP_PIN_nLUA,
+	MFP_PIN_nLLA,
+	MFP_PIN_DF_nWE,
+	MFP_PIN_DF_ALE_nWE,
+	MFP_PIN_DF_nRE_nOE,
+	MFP_PIN_DF_ADDR0,
+	MFP_PIN_DF_ADDR1,
+	MFP_PIN_DF_ADDR2,
+	MFP_PIN_DF_ADDR3,
+	MFP_PIN_DF_IO0,
+	MFP_PIN_DF_IO1,
+	MFP_PIN_DF_IO2,
+	MFP_PIN_DF_IO3,
+	MFP_PIN_DF_IO4,
+	MFP_PIN_DF_IO5,
+	MFP_PIN_DF_IO6,
+	MFP_PIN_DF_IO7,
+	MFP_PIN_DF_IO8,
+	MFP_PIN_DF_IO9,
+	MFP_PIN_DF_IO10,
+	MFP_PIN_DF_IO11,
+	MFP_PIN_DF_IO12,
+	MFP_PIN_DF_IO13,
+	MFP_PIN_DF_IO14,
+	MFP_PIN_DF_IO15,
+
+	/* additional pins on PXA930 */
+	MFP_PIN_GSIM_UIO,
+	MFP_PIN_GSIM_UCLK,
+	MFP_PIN_GSIM_UDET,
+	MFP_PIN_GSIM_nURST,
+	MFP_PIN_PMIC_INT,
+	MFP_PIN_RDY,
+
+	MFP_PIN_MAX,
+};
+
+/*
+ * a possible MFP configuration is represented by a 32-bit integer
+ *
+ * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
+ * bit 10..12 - Alternate Function Selection
+ * bit 13..15 - Drive Strength
+ * bit 16..18 - Low Power Mode State
+ * bit 19..20 - Low Power Mode Edge Detection
+ * bit 21..22 - Run Mode Pull State
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * MFP_CFG_DEFAULT - default MFP configuration value, with
+ * 		  alternate function = 0,
+ * 		  drive strength = fast 3mA (MFP_DS03X)
+ * 		  low power mode = default
+ * 		  edge detection = none
+ *
+ * MFP_CFG	- default MFPR value with alternate function
+ * MFP_CFG_DRV	- default MFPR value with alternate function and
+ * 		  pin drive strength
+ * MFP_CFG_LPM	- default MFPR value with alternate function and
+ * 		  low power mode
+ * MFP_CFG_X	- default MFPR value with alternate function,
+ * 		  pin drive strength and low power mode
+ */
+
+typedef unsigned long mfp_cfg_t;
+
+#define MFP_PIN(x)		((x) & 0x3ff)
+
+#define MFP_AF0			(0x0 << 10)
+#define MFP_AF1			(0x1 << 10)
+#define MFP_AF2			(0x2 << 10)
+#define MFP_AF3			(0x3 << 10)
+#define MFP_AF4			(0x4 << 10)
+#define MFP_AF5			(0x5 << 10)
+#define MFP_AF6			(0x6 << 10)
+#define MFP_AF7			(0x7 << 10)
+#define MFP_AF_MASK		(0x7 << 10)
+#define MFP_AF(x)		(((x) >> 10) & 0x7)
+
+#define MFP_DS01X		(0x0 << 13)
+#define MFP_DS02X		(0x1 << 13)
+#define MFP_DS03X		(0x2 << 13)
+#define MFP_DS04X		(0x3 << 13)
+#define MFP_DS06X		(0x4 << 13)
+#define MFP_DS08X		(0x5 << 13)
+#define MFP_DS10X		(0x6 << 13)
+#define MFP_DS13X		(0x7 << 13)
+#define MFP_DS_MASK		(0x7 << 13)
+#define MFP_DS(x)		(((x) >> 13) & 0x7)
+
+#define MFP_LPM_INPUT		(0x0 << 16)
+#define MFP_LPM_DRIVE_LOW	(0x1 << 16)
+#define MFP_LPM_DRIVE_HIGH	(0x2 << 16)
+#define MFP_LPM_PULL_LOW	(0x3 << 16)
+#define MFP_LPM_PULL_HIGH	(0x4 << 16)
+#define MFP_LPM_FLOAT		(0x5 << 16)
+#define MFP_LPM_STATE_MASK	(0x7 << 16)
+#define MFP_LPM_STATE(x)	(((x) >> 16) & 0x7)
+
+#define MFP_LPM_EDGE_NONE	(0x0 << 19)
+#define MFP_LPM_EDGE_RISE	(0x1 << 19)
+#define MFP_LPM_EDGE_FALL	(0x2 << 19)
+#define MFP_LPM_EDGE_BOTH	(0x3 << 19)
+#define MFP_LPM_EDGE_MASK	(0x3 << 19)
+#define MFP_LPM_EDGE(x)		(((x) >> 19) & 0x3)
+
+#define MFP_PULL_NONE		(0x0 << 21)
+#define MFP_PULL_LOW		(0x1 << 21)
+#define MFP_PULL_HIGH		(0x2 << 21)
+#define MFP_PULL_BOTH		(0x3 << 21)
+#define MFP_PULL_MASK		(0x3 << 21)
+#define MFP_PULL(x)		(((x) >> 21) & 0x3)
+
+#define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_INPUT |\
+				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
+
+#define MFP_CFG(pin, af)		\
+	((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
+
+#define MFP_CFG_DRV(pin, af, drv)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
+
+#define MFP_CFG_LPM(pin, af, lpm)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
+
+#define MFP_CFG_X(pin, af, drv, lpm)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
+
+#endif /* __ASM_ARCH_MFP_H */
diff --git a/include/asm-arm/arch-pxa/mmc.h b/arch/arm/mach-pxa/include/mach/mmc.h
similarity index 100%
rename from include/asm-arm/arch-pxa/mmc.h
rename to arch/arm/mach-pxa/include/mach/mmc.h
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
new file mode 100644
index 0000000..351f32f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -0,0 +1,37 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ * 
+ * Author:	Nicolas Pitre
+ * Created:	Nov 2, 2004
+ * Copyright:	(C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
+ */
+
+#ifndef __ARCH_PXA_MTD_XIP_H__
+#define __ARCH_PXA_MTD_XIP_H__
+
+#include <mach/pxa-regs.h>
+
+#define xip_irqpending()	(ICIP & ICMR)
+
+/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
+#define xip_currtime()		(OSCR)
+#define xip_elapsed_since(x)	(signed)((OSCR - (x)) / 4)
+
+/*
+ * xip_cpu_idle() is used when waiting for a delay equal or larger than
+ * the system timer tick period.  This should put the CPU into idle mode
+ * to save power and to be woken up only when some interrupts are pending.
+ * As above, this should not rely upon standard kernel code.
+ */
+
+#define xip_cpu_idle()  asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1))
+
+#endif /* __ARCH_PXA_MTD_XIP_H__ */
diff --git a/include/asm-arm/arch-pxa/ohci.h b/arch/arm/mach-pxa/include/mach/ohci.h
similarity index 100%
rename from include/asm-arm/arch-pxa/ohci.h
rename to arch/arm/mach-pxa/include/mach/ohci.h
diff --git a/include/asm-arm/arch-pxa/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
similarity index 100%
rename from include/asm-arm/arch-pxa/palmtx.h
rename to arch/arm/mach-pxa/include/mach/palmtx.h
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
new file mode 100644
index 0000000..4dcd2e8
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pcm027.h
+ *
+ * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Definitions of CPU card resources only
+ */
+
+/* I2C RTC */
+#define PCM027_RTC_IRQ_GPIO	0
+#define PCM027_RTC_IRQ		IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
+#define PCM027_RTC_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
+#define ADR_PCM027_RTC		0x51	/* I2C address */
+
+/* I2C EEPROM */
+#define ADR_PCM027_EEPROM	0x54	/* I2C address */
+
+/* Ethernet chip (SMSC91C111) */
+#define PCM027_ETH_IRQ_GPIO	52
+#define PCM027_ETH_IRQ		IRQ_GPIO(PCM027_ETH_IRQ_GPIO)
+#define PCM027_ETH_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+#define PCM027_ETH_PHYS		PXA_CS5_PHYS
+#define PCM027_ETH_SIZE		(1*1024*1024)
+
+/* CAN controller SJA1000 (unsupported yet) */
+#define PCM027_CAN_IRQ_GPIO	114
+#define PCM027_CAN_IRQ		IRQ_GPIO(PCM027_CAN_IRQ_GPIO)
+#define PCM027_CAN_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
+#define PCM027_CAN_PHYS		0x22000000
+#define PCM027_CAN_SIZE		0x100
+
+/* SPI GPIO expander (unsupported yet) */
+#define PCM027_EGPIO_IRQ_GPIO	27
+#define PCM027_EGPIO_IRQ	IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO)
+#define PCM027_EGPIO_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
+#define PCM027_EGPIO_CS		24
+/*
+ * TODO: Switch this pin from dedicated usage to GPIO if
+ * more than the MAX7301 device is connected to this SPI bus
+ */
+#define PCM027_EGPIO_CS_MODE	GPIO24_SFRM_MD
+
+/* Flash memory */
+#define PCM027_FLASH_PHYS	0x00000000
+#define PCM027_FLASH_SIZE	0x02000000
+
+/* onboard LEDs connected to GPIO */
+#define PCM027_LED_CPU		90
+#define PCM027_LED_HEARD_BEAT	91
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ * TODO: Add your own basebaord init function and call it from
+ * inside pcm027_init(). This example here is for the developmen board.
+ * Refer pcm990-baseboard.c
+ */
+extern void pcm990_baseboard_init(void);
diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
new file mode 100644
index 0000000..8a4383b
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
@@ -0,0 +1,275 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
+ *
+ * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <mach/pcm027.h>
+
+/*
+ * definitions relevant only when the PCM-990
+ * development base board is in use
+ */
+
+/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
+#define PCM990_CTRL_INT_IRQ_GPIO	9
+#define PCM990_CTRL_INT_IRQ		IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO)
+#define PCM990_CTRL_INT_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+#define PCM990_CTRL_PHYS		PXA_CS1_PHYS	/* 16-Bit */
+#define PCM990_CTRL_BASE		0xea000000
+#define PCM990_CTRL_SIZE		(1*1024*1024)
+
+#define PCM990_CTRL_PWR_IRQ_GPIO	14
+#define PCM990_CTRL_PWR_IRQ		IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO)
+#define PCM990_CTRL_PWR_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+
+/* visible CPLD (U7) registers */
+#define PCM990_CTRL_REG0	0x0000	/* RESET REGISTER */
+#define PCM990_CTRL_SYSRES	0x0001	/* System RESET REGISTER */
+#define PCM990_CTRL_RESOUT	0x0002	/* RESETOUT Enable REGISTER */
+#define PCM990_CTRL_RESGPIO	0x0004	/* RESETGPIO Enable REGISTER */
+
+#define PCM990_CTRL_REG1	0x0002	/* Power REGISTER */
+#define PCM990_CTRL_5VOFF	0x0001	/* Disable  5V Regulators */
+#define PCM990_CTRL_CANPWR	0x0004	/* Enable CANPWR ADUM */
+#define PCM990_CTRL_PM_5V	0x0008	/* Read 5V OK */
+
+#define PCM990_CTRL_REG2	0x0004	/* LED REGISTER */
+#define PCM990_CTRL_LEDPWR	0x0001	/* POWER LED enable */
+#define PCM990_CTRL_LEDBAS	0x0002	/* BASIS LED enable */
+#define PCM990_CTRL_LEDUSR	0x0004	/* USER LED enable */
+
+#define PCM990_CTRL_REG3	0x0006	/* LCD CTRL REGISTER 3 */
+#define PCM990_CTRL_LCDPWR	0x0001	/* RW LCD Power on */
+#define PCM990_CTRL_LCDON	0x0002	/* RW LCD Latch on */
+#define PCM990_CTRL_LCDPOS1	0x0004	/* RW POS 1 */
+#define PCM990_CTRL_LCDPOS2	0x0008	/* RW POS 2 */
+
+#define PCM990_CTRL_REG4	0x0008	/* MMC1 CTRL REGISTER 4 */
+#define PCM990_CTRL_MMC1PWR	0x0001 /* RW MMC1 Power on */
+
+#define PCM990_CTRL_REG5	0x000A	/* MMC2 CTRL REGISTER 5 */
+#define PCM990_CTRL_MMC2PWR	0x0001	/* RW MMC2 Power on */
+#define PCM990_CTRL_MMC2LED	0x0002	/* RW MMC2 LED */
+#define PCM990_CTRL_MMC2DE	0x0004	/* R MMC2 Card detect */
+#define PCM990_CTRL_MMC2WP	0x0008	/* R MMC2 Card write protect */
+
+#define PCM990_CTRL_REG6	0x000C	/* Interrupt Clear REGISTER */
+#define PCM990_CTRL_INTC0	0x0001	/* Clear Reg BT Detect */
+#define PCM990_CTRL_INTC1	0x0002	/* Clear Reg FR RI */
+#define PCM990_CTRL_INTC2	0x0004	/* Clear Reg MMC1 Detect */
+#define PCM990_CTRL_INTC3	0x0008	/* Clear Reg PM_5V off */
+
+#define PCM990_CTRL_REG7	0x000E	/* Interrupt Enable REGISTER */
+#define PCM990_CTRL_ENAINT0	0x0001	/* Enable Int BT Detect */
+#define PCM990_CTRL_ENAINT1	0x0002	/* Enable Int FR RI */
+#define PCM990_CTRL_ENAINT2	0x0004	/* Enable Int MMC1 Detect */
+#define PCM990_CTRL_ENAINT3	0x0008	/* Enable Int PM_5V off */
+
+#define PCM990_CTRL_REG8	0x0014	/* Uart REGISTER */
+#define PCM990_CTRL_FFSD	0x0001	/* BT Uart Enable */
+#define PCM990_CTRL_BTSD	0x0002	/* FF Uart Enable */
+#define PCM990_CTRL_FFRI	0x0004	/* FF Uart RI detect */
+#define PCM990_CTRL_BTRX	0x0008	/* BT Uart Rx detect */
+
+#define PCM990_CTRL_REG9	0x0010	/* AC97 Flash REGISTER */
+#define PCM990_CTRL_FLWP	0x0001	/* pC Flash Write Protect */
+#define PCM990_CTRL_FLDIS	0x0002	/* pC Flash Disable */
+#define PCM990_CTRL_AC97ENA	0x0004	/* Enable AC97 Expansion */
+
+#define PCM990_CTRL_REG10	0x0012	/* GPS-REGISTER */
+#define PCM990_CTRL_GPSPWR	0x0004	/* GPS-Modul Power on */
+#define PCM990_CTRL_GPSENA	0x0008	/* GPS-Modul Enable */
+
+#define PCM990_CTRL_REG11	0x0014	/* Accu REGISTER */
+#define PCM990_CTRL_ACENA	0x0001	/* Charge Enable */
+#define PCM990_CTRL_ACSEL	0x0002	/* Charge Akku -> DC Enable */
+#define PCM990_CTRL_ACPRES	0x0004	/* DC Present */
+#define PCM990_CTRL_ACALARM	0x0008	/* Error Akku */
+
+#define PCM990_CTRL_P2V(x)	((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE)
+#define PCM990_CTRL_V2P(x)	((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS)
+
+#ifndef __ASSEMBLY__
+#  define __PCM990_CTRL_REG(x) \
+		(*((volatile unsigned char *)PCM990_CTRL_P2V(x)))
+#else
+#  define __PCM990_CTRL_REG(x)	PCM990_CTRL_P2V(x)
+#endif
+
+#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
+#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
+#define PCM990_CTRL0	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0)
+#define PCM990_CTRL1	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1)
+#define PCM990_CTRL2	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2)
+#define PCM990_CTRL3	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3)
+#define PCM990_CTRL4	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4)
+#define PCM990_CTRL5	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5)
+#define PCM990_CTRL6	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
+#define PCM990_CTRL7	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
+#define PCM990_CTRL8	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8)
+#define PCM990_CTRL9	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9)
+#define PCM990_CTRL10	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10)
+#define PCM990_CTRL11	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11)
+
+
+/*
+ * IDE
+ */
+#define PCM990_IDE_IRQ_GPIO	13
+#define PCM990_IDE_IRQ		IRQ_GPIO(PCM990_IDE_IRQ_GPIO)
+#define PCM990_IDE_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+#define PCM990_IDE_PLD_PHYS	0x20000000	/* 16 bit wide */
+#define PCM990_IDE_PLD_BASE	0xee000000
+#define PCM990_IDE_PLD_SIZE	(1*1024*1024)
+
+/* visible CPLD (U6) registers */
+#define PCM990_IDE_PLD_REG0	0x1000	/* OFFSET IDE REGISTER 0 */
+#define PCM990_IDE_PM5V		0x0004	/* R System VCC_5V */
+#define PCM990_IDE_STBY		0x0008	/* R System StandBy */
+
+#define PCM990_IDE_PLD_REG1	0x1002	/* OFFSET IDE REGISTER 1 */
+#define PCM990_IDE_IDEMODE	0x0001	/* R TrueIDE Mode */
+#define PCM990_IDE_DMAENA	0x0004	/* RW DMA Enable */
+#define PCM990_IDE_DMA1_0	0x0008	/* RW 1=DREQ1 0=DREQ0 */
+
+#define PCM990_IDE_PLD_REG2	0x1004	/* OFFSET IDE REGISTER 2 */
+#define PCM990_IDE_RESENA	0x0001	/* RW IDE Reset Bit enable */
+#define PCM990_IDE_RES		0x0002	/* RW IDE Reset Bit */
+#define PCM990_IDE_RDY		0x0008	/* RDY */
+
+#define PCM990_IDE_PLD_REG3	0x1006	/* OFFSET IDE REGISTER 3 */
+#define PCM990_IDE_IDEOE	0x0001	/* RW Latch on Databus */
+#define PCM990_IDE_IDEON	0x0002	/* RW Latch on Control Address */
+#define PCM990_IDE_IDEIN	0x0004	/* RW Latch on Interrupt usw. */
+
+#define PCM990_IDE_PLD_REG4	0x1008	/* OFFSET IDE REGISTER 4 */
+#define PCM990_IDE_PWRENA	0x0001	/* RW IDE Power enable */
+#define PCM990_IDE_5V		0x0002	/* R IDE Power 5V */
+#define PCM990_IDE_PWG		0x0008	/* R IDE Power is on */
+
+#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE)
+#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS)
+
+#ifndef __ASSEMBLY__
+# define  __PCM990_IDE_PLD_REG(x) \
+	(*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x)))
+#else
+# define  __PCM990_IDE_PLD_REG(x)	PCM990_IDE_PLD_P2V(x)
+#endif
+
+#define PCM990_IDE0 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0)
+#define PCM990_IDE1 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1)
+#define PCM990_IDE2 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2)
+#define PCM990_IDE3 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3)
+#define PCM990_IDE4 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4)
+
+/*
+ * Compact Flash
+ */
+#define PCM990_CF_IRQ_GPIO	11
+#define PCM990_CF_IRQ		IRQ_GPIO(PCM990_CF_IRQ_GPIO)
+#define PCM990_CF_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+
+#define PCM990_CF_CD_GPIO	12
+#define PCM990_CF_CD		IRQ_GPIO(PCM990_CF_CD_GPIO)
+#define PCM990_CF_CD_EDGE	IRQ_TYPE_EDGE_RISING
+
+#define PCM990_CF_PLD_PHYS	0x30000000	/* 16 bit wide */
+#define PCM990_CF_PLD_BASE	0xef000000
+#define PCM990_CF_PLD_SIZE	(1*1024*1024)
+#define PCM990_CF_PLD_P2V(x)	((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE)
+#define PCM990_CF_PLD_V2P(x)	((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS)
+
+/* visible CPLD (U6) registers */
+#define PCM990_CF_PLD_REG0	0x1000	/* OFFSET CF REGISTER 0 */
+#define PCM990_CF_REG0_LED	0x0001	/* RW LED on */
+#define PCM990_CF_REG0_BLK	0x0002	/* RW LED flash when access */
+#define PCM990_CF_REG0_PM5V	0x0004	/* R System VCC_5V enable */
+#define PCM990_CF_REG0_STBY	0x0008	/* R System StandBy */
+
+#define PCM990_CF_PLD_REG1	0x1002	/* OFFSET CF REGISTER 1 */
+#define PCM990_CF_REG1_IDEMODE	0x0001	/* RW CF card run as TrueIDE */
+#define PCM990_CF_REG1_CF0	0x0002	/* RW CF card at ADDR 0x28000000 */
+
+#define PCM990_CF_PLD_REG2	0x1004	/* OFFSET CF REGISTER 2 */
+#define PCM990_CF_REG2_RES	0x0002	/* RW CF RESET BIT */
+#define PCM990_CF_REG2_RDYENA	0x0004	/* RW Enable CF_RDY */
+#define PCM990_CF_REG2_RDY	0x0008	/* R CF_RDY auf PWAIT */
+
+#define PCM990_CF_PLD_REG3	0x1006	/* OFFSET CF REGISTER 3 */
+#define PCM990_CF_REG3_CFOE	0x0001	/* RW Latch on Databus */
+#define PCM990_CF_REG3_CFON	0x0002	/* RW Latch on Control Address */
+#define PCM990_CF_REG3_CFIN	0x0004	/* RW Latch on Interrupt usw. */
+#define PCM990_CF_REG3_CFCD	0x0008	/* RW Latch on CD1/2 VS1/2 usw */
+
+#define PCM990_CF_PLD_REG4	0x1008	/* OFFSET CF REGISTER 4 */
+#define PCM990_CF_REG4_PWRENA	0x0001	/* RW CF Power on (CD1/2 = "00") */
+#define PCM990_CF_REG4_5_3V	0x0002	/* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */
+#define PCM990_CF_REG4_3B	0x0004	/* RW 3.0V Backup from VCC (5_3V=0) */
+#define PCM990_CF_REG4_PWG	0x0008	/* R CF-Power is on */
+
+#define PCM990_CF_PLD_REG5	0x100A	/* OFFSET CF REGISTER 5 */
+#define PCM990_CF_REG5_BVD1	0x0001	/* R CF /BVD1 */
+#define PCM990_CF_REG5_BVD2	0x0002	/* R CF /BVD2 */
+#define PCM990_CF_REG5_VS1	0x0004	/* R CF /VS1 */
+#define PCM990_CF_REG5_VS2	0x0008	/* R CF /VS2 */
+
+#define PCM990_CF_PLD_REG6	0x100C	/* OFFSET CF REGISTER 6 */
+#define PCM990_CF_REG6_CD1	0x0001	/* R CF Card_Detect1 */
+#define PCM990_CF_REG6_CD2	0x0002	/* R CF Card_Detect2 */
+
+#ifndef __ASSEMBLY__
+#  define  __PCM990_CF_PLD_REG(x) \
+	(*((volatile unsigned char *)PCM990_CF_PLD_P2V(x)))
+#else
+#  define  __PCM990_CF_PLD_REG(x)	PCM990_CF_PLD_P2V(x)
+#endif
+
+#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0)
+#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1)
+#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2)
+#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3)
+#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4)
+#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5)
+#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6)
+
+/*
+ * Wolfson AC97 Touch
+ */
+#define PCM990_AC97_IRQ_GPIO	10
+#define PCM990_AC97_IRQ		IRQ_GPIO(PCM990_AC97_IRQ_GPIO)
+#define PCM990_AC97_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+
+/*
+ * MMC phyCORE
+ */
+#define PCM990_MMC0_IRQ_GPIO	9
+#define PCM990_MMC0_IRQ		IRQ_GPIO(PCM990_MMC0_IRQ_GPIO)
+#define PCM990_MMC0_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
+
+/*
+ * USB phyCore
+ */
+#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN)
+#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT)
diff --git a/include/asm-arm/arch-pxa/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
similarity index 100%
rename from include/asm-arm/arch-pxa/pm.h
rename to arch/arm/mach-pxa/include/mach/pm.h
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
new file mode 100644
index 0000000..8956afe
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-pxa/include/mach/poodle.h
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Based on:
+ *   arch/arm/mach-sa1100/include/mach/collie.h
+ *
+ * ChangeLog:
+ *   04-06-2001 Lineo Japan, Inc.
+ *   04-16-2001 SHARP Corporation
+ *   Update to 2.6 John Lenz
+ */
+#ifndef __ASM_ARCH_POODLE_H
+#define __ASM_ARCH_POODLE_H  1
+
+/*
+ * GPIOs
+ */
+/* PXA GPIOs */
+#define POODLE_GPIO_ON_KEY		(0)
+#define POODLE_GPIO_AC_IN		(1)
+#define POODLE_GPIO_CO			16
+#define POODLE_GPIO_TP_INT		(5)
+#define POODLE_GPIO_WAKEUP		(11)	/* change battery */
+#define POODLE_GPIO_GA_INT		(10)
+#define POODLE_GPIO_IR_ON		(22)
+#define POODLE_GPIO_HP_IN		(4)
+#define POODLE_GPIO_CF_IRQ		(17)
+#define POODLE_GPIO_CF_CD		(14)
+#define POODLE_GPIO_CF_STSCHG		(14)
+#define POODLE_GPIO_SD_PWR		(33)
+#define POODLE_GPIO_SD_PWR1		(3)
+#define POODLE_GPIO_nSD_CLK		(6)
+#define POODLE_GPIO_nSD_WP		(7)
+#define POODLE_GPIO_nSD_INT		(8)
+#define POODLE_GPIO_nSD_DETECT		(9)
+#define POODLE_GPIO_MAIN_BAT_LOW	(13)
+#define POODLE_GPIO_BAT_COVER		(13)
+#define POODLE_GPIO_USB_PULLUP		(20)
+#define POODLE_GPIO_ADC_TEMP_ON		(21)
+#define POODLE_GPIO_BYPASS_ON		(36)
+#define POODLE_GPIO_CHRG_ON		(38)
+#define POODLE_GPIO_CHRG_FULL		(16)
+#define POODLE_GPIO_DISCHARGE_ON        (42) /* Enable battery discharge */
+
+/* PXA GPIOs */
+#define POODLE_IRQ_GPIO_ON_KEY		IRQ_GPIO(0)
+#define POODLE_IRQ_GPIO_AC_IN		IRQ_GPIO(1)
+#define POODLE_IRQ_GPIO_HP_IN		IRQ_GPIO(4)
+#define POODLE_IRQ_GPIO_CO		IRQ_GPIO(16)
+#define POODLE_IRQ_GPIO_TP_INT		IRQ_GPIO(5)
+#define POODLE_IRQ_GPIO_WAKEUP		IRQ_GPIO(11)
+#define POODLE_IRQ_GPIO_GA_INT		IRQ_GPIO(10)
+#define POODLE_IRQ_GPIO_CF_IRQ		IRQ_GPIO(17)
+#define POODLE_IRQ_GPIO_CF_CD		IRQ_GPIO(14)
+#define POODLE_IRQ_GPIO_nSD_INT		IRQ_GPIO(8)
+#define POODLE_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(9)
+#define POODLE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO(13)
+
+/* SCOOP GPIOs */
+#define POODLE_SCOOP_CHARGE_ON	SCOOP_GPCR_PA11
+#define POODLE_SCOOP_CP401	SCOOP_GPCR_PA13
+#define POODLE_SCOOP_VPEN	SCOOP_GPCR_PA18
+#define POODLE_SCOOP_L_PCLK	SCOOP_GPCR_PA20
+#define POODLE_SCOOP_L_LCLK	SCOOP_GPCR_PA21
+#define POODLE_SCOOP_HS_OUT	SCOOP_GPCR_PA22
+
+#define POODLE_SCOOP_IO_DIR	( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
+#define POODLE_SCOOP_IO_OUT	( 0 )
+
+extern struct platform_device poodle_locomo_device;
+
+#endif /* __ASM_ARCH_POODLE_H  */
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
new file mode 100644
index 0000000..12288ca
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -0,0 +1,1070 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/pxa-regs.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PXA_REGS_H
+#define __PXA_REGS_H
+
+
+/*
+ * PXA Chip selects
+ */
+
+#define PXA_CS0_PHYS	0x00000000
+#define PXA_CS1_PHYS	0x04000000
+#define PXA_CS2_PHYS	0x08000000
+#define PXA_CS3_PHYS	0x0C000000
+#define PXA_CS4_PHYS	0x10000000
+#define PXA_CS5_PHYS	0x14000000
+
+
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) sockets
+ */
+
+#define PCMCIAPrtSp	0x04000000	/* PCMCIA Partition Space [byte]   */
+#define PCMCIASp	(4*PCMCIAPrtSp)	/* PCMCIA Space [byte]             */
+#define PCMCIAIOSp	PCMCIAPrtSp	/* PCMCIA I/O Space [byte]         */
+#define PCMCIAAttrSp	PCMCIAPrtSp	/* PCMCIA Attribute Space [byte]   */
+#define PCMCIAMemSp	PCMCIAPrtSp	/* PCMCIA Memory Space [byte]      */
+
+#define PCMCIA0Sp	PCMCIASp	/* PCMCIA 0 Space [byte]           */
+#define PCMCIA0IOSp	PCMCIAIOSp	/* PCMCIA 0 I/O Space [byte]       */
+#define PCMCIA0AttrSp	PCMCIAAttrSp	/* PCMCIA 0 Attribute Space [byte] */
+#define PCMCIA0MemSp	PCMCIAMemSp	/* PCMCIA 0 Memory Space [byte]    */
+
+#define PCMCIA1Sp	PCMCIASp	/* PCMCIA 1 Space [byte]           */
+#define PCMCIA1IOSp	PCMCIAIOSp	/* PCMCIA 1 I/O Space [byte]       */
+#define PCMCIA1AttrSp	PCMCIAAttrSp	/* PCMCIA 1 Attribute Space [byte] */
+#define PCMCIA1MemSp	PCMCIAMemSp	/* PCMCIA 1 Memory Space [byte]    */
+
+#define _PCMCIA(Nb)	        	/* PCMCIA [0..1]                   */ \
+                	(0x20000000 + (Nb)*PCMCIASp)
+#define _PCMCIAIO(Nb)	_PCMCIA (Nb)	/* PCMCIA I/O [0..1]               */
+#define _PCMCIAAttr(Nb)	        	/* PCMCIA Attribute [0..1]         */ \
+                	(_PCMCIA (Nb) + 2*PCMCIAPrtSp)
+#define _PCMCIAMem(Nb)	        	/* PCMCIA Memory [0..1]            */ \
+                	(_PCMCIA (Nb) + 3*PCMCIAPrtSp)
+
+#define _PCMCIA0	_PCMCIA (0)	/* PCMCIA 0                        */
+#define _PCMCIA0IO	_PCMCIAIO (0)	/* PCMCIA 0 I/O                    */
+#define _PCMCIA0Attr	_PCMCIAAttr (0)	/* PCMCIA 0 Attribute              */
+#define _PCMCIA0Mem	_PCMCIAMem (0)	/* PCMCIA 0 Memory                 */
+
+#define _PCMCIA1	_PCMCIA (1)	/* PCMCIA 1                        */
+#define _PCMCIA1IO	_PCMCIAIO (1)	/* PCMCIA 1 I/O                    */
+#define _PCMCIA1Attr	_PCMCIAAttr (1)	/* PCMCIA 1 Attribute              */
+#define _PCMCIA1Mem	_PCMCIAMem (1)	/* PCMCIA 1 Memory                 */
+
+
+
+/*
+ * DMA Controller
+ */
+
+#define DCSR0		__REG(0x40000000)  /* DMA Control / Status Register for Channel 0 */
+#define DCSR1		__REG(0x40000004)  /* DMA Control / Status Register for Channel 1 */
+#define DCSR2		__REG(0x40000008)  /* DMA Control / Status Register for Channel 2 */
+#define DCSR3		__REG(0x4000000c)  /* DMA Control / Status Register for Channel 3 */
+#define DCSR4		__REG(0x40000010)  /* DMA Control / Status Register for Channel 4 */
+#define DCSR5		__REG(0x40000014)  /* DMA Control / Status Register for Channel 5 */
+#define DCSR6		__REG(0x40000018)  /* DMA Control / Status Register for Channel 6 */
+#define DCSR7		__REG(0x4000001c)  /* DMA Control / Status Register for Channel 7 */
+#define DCSR8		__REG(0x40000020)  /* DMA Control / Status Register for Channel 8 */
+#define DCSR9		__REG(0x40000024)  /* DMA Control / Status Register for Channel 9 */
+#define DCSR10		__REG(0x40000028)  /* DMA Control / Status Register for Channel 10 */
+#define DCSR11		__REG(0x4000002c)  /* DMA Control / Status Register for Channel 11 */
+#define DCSR12		__REG(0x40000030)  /* DMA Control / Status Register for Channel 12 */
+#define DCSR13		__REG(0x40000034)  /* DMA Control / Status Register for Channel 13 */
+#define DCSR14		__REG(0x40000038)  /* DMA Control / Status Register for Channel 14 */
+#define DCSR15		__REG(0x4000003c)  /* DMA Control / Status Register for Channel 15 */
+
+#define DCSR(x)		__REG2(0x40000000, (x) << 2)
+
+#define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
+#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
+#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
+#ifdef CONFIG_PXA27x
+#define DCSR_EORIRQEN	(1 << 28)       /* End of Receive Interrupt Enable (R/W) */
+#define DCSR_EORJMPEN	(1 << 27)       /* Jump to next descriptor on EOR */
+#define DCSR_EORSTOPEN	(1 << 26)       /* STOP on an EOR */
+#define DCSR_SETCMPST	(1 << 25)       /* Set Descriptor Compare Status */
+#define DCSR_CLRCMPST	(1 << 24)       /* Clear Descriptor Compare Status */
+#define DCSR_CMPST	(1 << 10)       /* The Descriptor Compare Status */
+#define DCSR_EORINTR	(1 << 9)        /* The end of Receive */
+#endif
+#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
+#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
+#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
+#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
+#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
+
+#define DALGN		__REG(0x400000a0)  /* DMA Alignment Register */
+#define DINT		__REG(0x400000f0)  /* DMA Interrupt Register */
+
+#define DRCMR(n)	(*(((n) < 64) ? \
+			&__REG2(0x40000100, ((n) & 0x3f) << 2) : \
+			&__REG2(0x40001100, ((n) & 0x3f) << 2)))
+
+#define DRCMR0		__REG(0x40000100)  /* Request to Channel Map Register for DREQ 0 */
+#define DRCMR1		__REG(0x40000104)  /* Request to Channel Map Register for DREQ 1 */
+#define DRCMR2		__REG(0x40000108)  /* Request to Channel Map Register for I2S receive Request */
+#define DRCMR3		__REG(0x4000010c)  /* Request to Channel Map Register for I2S transmit Request */
+#define DRCMR4		__REG(0x40000110)  /* Request to Channel Map Register for BTUART receive Request */
+#define DRCMR5		__REG(0x40000114)  /* Request to Channel Map Register for BTUART transmit Request. */
+#define DRCMR6		__REG(0x40000118)  /* Request to Channel Map Register for FFUART receive Request */
+#define DRCMR7		__REG(0x4000011c)  /* Request to Channel Map Register for FFUART transmit Request */
+#define DRCMR8		__REG(0x40000120)  /* Request to Channel Map Register for AC97 microphone Request */
+#define DRCMR9		__REG(0x40000124)  /* Request to Channel Map Register for AC97 modem receive Request */
+#define DRCMR10		__REG(0x40000128)  /* Request to Channel Map Register for AC97 modem transmit Request */
+#define DRCMR11		__REG(0x4000012c)  /* Request to Channel Map Register for AC97 audio receive Request */
+#define DRCMR12		__REG(0x40000130)  /* Request to Channel Map Register for AC97 audio transmit Request */
+#define DRCMR13		__REG(0x40000134)  /* Request to Channel Map Register for SSP receive Request */
+#define DRCMR14		__REG(0x40000138)  /* Request to Channel Map Register for SSP transmit Request */
+#define DRCMR15		__REG(0x4000013c)  /* Request to Channel Map Register for SSP2 receive Request */
+#define DRCMR16		__REG(0x40000140)  /* Request to Channel Map Register for SSP2 transmit Request */
+#define DRCMR17		__REG(0x40000144)  /* Request to Channel Map Register for ICP receive Request */
+#define DRCMR18		__REG(0x40000148)  /* Request to Channel Map Register for ICP transmit Request */
+#define DRCMR19		__REG(0x4000014c)  /* Request to Channel Map Register for STUART receive Request */
+#define DRCMR20		__REG(0x40000150)  /* Request to Channel Map Register for STUART transmit Request */
+#define DRCMR21		__REG(0x40000154)  /* Request to Channel Map Register for MMC receive Request */
+#define DRCMR22		__REG(0x40000158)  /* Request to Channel Map Register for MMC transmit Request */
+#define DRCMR23		__REG(0x4000015c)  /* Reserved */
+#define DRCMR24		__REG(0x40000160)  /* Reserved */
+#define DRCMR25		__REG(0x40000164)  /* Request to Channel Map Register for USB endpoint 1 Request */
+#define DRCMR26		__REG(0x40000168)  /* Request to Channel Map Register for USB endpoint 2 Request */
+#define DRCMR27		__REG(0x4000016C)  /* Request to Channel Map Register for USB endpoint 3 Request */
+#define DRCMR28		__REG(0x40000170)  /* Request to Channel Map Register for USB endpoint 4 Request */
+#define DRCMR29		__REG(0x40000174)  /* Reserved */
+#define DRCMR30		__REG(0x40000178)  /* Request to Channel Map Register for USB endpoint 6 Request */
+#define DRCMR31		__REG(0x4000017C)  /* Request to Channel Map Register for USB endpoint 7 Request */
+#define DRCMR32		__REG(0x40000180)  /* Request to Channel Map Register for USB endpoint 8 Request */
+#define DRCMR33		__REG(0x40000184)  /* Request to Channel Map Register for USB endpoint 9 Request */
+#define DRCMR34		__REG(0x40000188)  /* Reserved */
+#define DRCMR35		__REG(0x4000018C)  /* Request to Channel Map Register for USB endpoint 11 Request */
+#define DRCMR36		__REG(0x40000190)  /* Request to Channel Map Register for USB endpoint 12 Request */
+#define DRCMR37		__REG(0x40000194)  /* Request to Channel Map Register for USB endpoint 13 Request */
+#define DRCMR38		__REG(0x40000198)  /* Request to Channel Map Register for USB endpoint 14 Request */
+#define DRCMR39		__REG(0x4000019C)  /* Reserved */
+#define DRCMR66		__REG(0x40001108)  /* Request to Channel Map Register for SSP3 receive Request */
+#define DRCMR67		__REG(0x4000110C)  /* Request to Channel Map Register for SSP3 transmit Request */
+#define DRCMR68		__REG(0x40001110)  /* Request to Channel Map Register for Camera FIFO 0 Request */
+#define DRCMR69		__REG(0x40001114)  /* Request to Channel Map Register for Camera FIFO 1 Request */
+#define DRCMR70		__REG(0x40001118)  /* Request to Channel Map Register for Camera FIFO 2 Request */
+
+#define DRCMRRXSADR	DRCMR2
+#define DRCMRTXSADR	DRCMR3
+#define DRCMRRXBTRBR	DRCMR4
+#define DRCMRTXBTTHR	DRCMR5
+#define DRCMRRXFFRBR	DRCMR6
+#define DRCMRTXFFTHR	DRCMR7
+#define DRCMRRXMCDR	DRCMR8
+#define DRCMRRXMODR	DRCMR9
+#define DRCMRTXMODR	DRCMR10
+#define DRCMRRXPCDR	DRCMR11
+#define DRCMRTXPCDR	DRCMR12
+#define DRCMRRXSSDR	DRCMR13
+#define DRCMRTXSSDR	DRCMR14
+#define DRCMRRXSS2DR   DRCMR15
+#define DRCMRTXSS2DR   DRCMR16
+#define DRCMRRXICDR	DRCMR17
+#define DRCMRTXICDR	DRCMR18
+#define DRCMRRXSTRBR	DRCMR19
+#define DRCMRTXSTTHR	DRCMR20
+#define DRCMRRXMMC	DRCMR21
+#define DRCMRTXMMC	DRCMR22
+#define DRCMRRXSS3DR   DRCMR66
+#define DRCMRTXSS3DR   DRCMR67
+#define DRCMRUDC(x)	DRCMR((x) + 24)
+
+#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
+#define DRCMR_CHLNUM	0x1f		/* mask for Channel Number (read / write) */
+
+#define DDADR0		__REG(0x40000200)  /* DMA Descriptor Address Register Channel 0 */
+#define DSADR0		__REG(0x40000204)  /* DMA Source Address Register Channel 0 */
+#define DTADR0		__REG(0x40000208)  /* DMA Target Address Register Channel 0 */
+#define DCMD0		__REG(0x4000020c)  /* DMA Command Address Register Channel 0 */
+#define DDADR1		__REG(0x40000210)  /* DMA Descriptor Address Register Channel 1 */
+#define DSADR1		__REG(0x40000214)  /* DMA Source Address Register Channel 1 */
+#define DTADR1		__REG(0x40000218)  /* DMA Target Address Register Channel 1 */
+#define DCMD1		__REG(0x4000021c)  /* DMA Command Address Register Channel 1 */
+#define DDADR2		__REG(0x40000220)  /* DMA Descriptor Address Register Channel 2 */
+#define DSADR2		__REG(0x40000224)  /* DMA Source Address Register Channel 2 */
+#define DTADR2		__REG(0x40000228)  /* DMA Target Address Register Channel 2 */
+#define DCMD2		__REG(0x4000022c)  /* DMA Command Address Register Channel 2 */
+#define DDADR3		__REG(0x40000230)  /* DMA Descriptor Address Register Channel 3 */
+#define DSADR3		__REG(0x40000234)  /* DMA Source Address Register Channel 3 */
+#define DTADR3		__REG(0x40000238)  /* DMA Target Address Register Channel 3 */
+#define DCMD3		__REG(0x4000023c)  /* DMA Command Address Register Channel 3 */
+#define DDADR4		__REG(0x40000240)  /* DMA Descriptor Address Register Channel 4 */
+#define DSADR4		__REG(0x40000244)  /* DMA Source Address Register Channel 4 */
+#define DTADR4		__REG(0x40000248)  /* DMA Target Address Register Channel 4 */
+#define DCMD4		__REG(0x4000024c)  /* DMA Command Address Register Channel 4 */
+#define DDADR5		__REG(0x40000250)  /* DMA Descriptor Address Register Channel 5 */
+#define DSADR5		__REG(0x40000254)  /* DMA Source Address Register Channel 5 */
+#define DTADR5		__REG(0x40000258)  /* DMA Target Address Register Channel 5 */
+#define DCMD5		__REG(0x4000025c)  /* DMA Command Address Register Channel 5 */
+#define DDADR6		__REG(0x40000260)  /* DMA Descriptor Address Register Channel 6 */
+#define DSADR6		__REG(0x40000264)  /* DMA Source Address Register Channel 6 */
+#define DTADR6		__REG(0x40000268)  /* DMA Target Address Register Channel 6 */
+#define DCMD6		__REG(0x4000026c)  /* DMA Command Address Register Channel 6 */
+#define DDADR7		__REG(0x40000270)  /* DMA Descriptor Address Register Channel 7 */
+#define DSADR7		__REG(0x40000274)  /* DMA Source Address Register Channel 7 */
+#define DTADR7		__REG(0x40000278)  /* DMA Target Address Register Channel 7 */
+#define DCMD7		__REG(0x4000027c)  /* DMA Command Address Register Channel 7 */
+#define DDADR8		__REG(0x40000280)  /* DMA Descriptor Address Register Channel 8 */
+#define DSADR8		__REG(0x40000284)  /* DMA Source Address Register Channel 8 */
+#define DTADR8		__REG(0x40000288)  /* DMA Target Address Register Channel 8 */
+#define DCMD8		__REG(0x4000028c)  /* DMA Command Address Register Channel 8 */
+#define DDADR9		__REG(0x40000290)  /* DMA Descriptor Address Register Channel 9 */
+#define DSADR9		__REG(0x40000294)  /* DMA Source Address Register Channel 9 */
+#define DTADR9		__REG(0x40000298)  /* DMA Target Address Register Channel 9 */
+#define DCMD9		__REG(0x4000029c)  /* DMA Command Address Register Channel 9 */
+#define DDADR10		__REG(0x400002a0)  /* DMA Descriptor Address Register Channel 10 */
+#define DSADR10		__REG(0x400002a4)  /* DMA Source Address Register Channel 10 */
+#define DTADR10		__REG(0x400002a8)  /* DMA Target Address Register Channel 10 */
+#define DCMD10		__REG(0x400002ac)  /* DMA Command Address Register Channel 10 */
+#define DDADR11		__REG(0x400002b0)  /* DMA Descriptor Address Register Channel 11 */
+#define DSADR11		__REG(0x400002b4)  /* DMA Source Address Register Channel 11 */
+#define DTADR11		__REG(0x400002b8)  /* DMA Target Address Register Channel 11 */
+#define DCMD11		__REG(0x400002bc)  /* DMA Command Address Register Channel 11 */
+#define DDADR12		__REG(0x400002c0)  /* DMA Descriptor Address Register Channel 12 */
+#define DSADR12		__REG(0x400002c4)  /* DMA Source Address Register Channel 12 */
+#define DTADR12		__REG(0x400002c8)  /* DMA Target Address Register Channel 12 */
+#define DCMD12		__REG(0x400002cc)  /* DMA Command Address Register Channel 12 */
+#define DDADR13		__REG(0x400002d0)  /* DMA Descriptor Address Register Channel 13 */
+#define DSADR13		__REG(0x400002d4)  /* DMA Source Address Register Channel 13 */
+#define DTADR13		__REG(0x400002d8)  /* DMA Target Address Register Channel 13 */
+#define DCMD13		__REG(0x400002dc)  /* DMA Command Address Register Channel 13 */
+#define DDADR14		__REG(0x400002e0)  /* DMA Descriptor Address Register Channel 14 */
+#define DSADR14		__REG(0x400002e4)  /* DMA Source Address Register Channel 14 */
+#define DTADR14		__REG(0x400002e8)  /* DMA Target Address Register Channel 14 */
+#define DCMD14		__REG(0x400002ec)  /* DMA Command Address Register Channel 14 */
+#define DDADR15		__REG(0x400002f0)  /* DMA Descriptor Address Register Channel 15 */
+#define DSADR15		__REG(0x400002f4)  /* DMA Source Address Register Channel 15 */
+#define DTADR15		__REG(0x400002f8)  /* DMA Target Address Register Channel 15 */
+#define DCMD15		__REG(0x400002fc)  /* DMA Command Address Register Channel 15 */
+
+#define DDADR(x)	__REG2(0x40000200, (x) << 4)
+#define DSADR(x)	__REG2(0x40000204, (x) << 4)
+#define DTADR(x)	__REG2(0x40000208, (x) << 4)
+#define DCMD(x)		__REG2(0x4000020c, (x) << 4)
+
+#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor (mask) */
+#define DDADR_STOP	(1 << 0)	/* Stop (read / write) */
+
+#define DCMD_INCSRCADDR	(1 << 31)	/* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR	(1 << 30)	/* Target Address Increment Setting. */
+#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
+#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
+#define DCMD_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
+#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
+#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
+#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
+#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
+#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
+#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
+#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
+#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
+
+
+/*
+ * UARTs
+ */
+
+/* Full Function UART (FFUART) */
+#define FFUART		FFRBR
+#define FFRBR		__REG(0x40100000)  /* Receive Buffer Register (read only) */
+#define FFTHR		__REG(0x40100000)  /* Transmit Holding Register (write only) */
+#define FFIER		__REG(0x40100004)  /* Interrupt Enable Register (read/write) */
+#define FFIIR		__REG(0x40100008)  /* Interrupt ID Register (read only) */
+#define FFFCR		__REG(0x40100008)  /* FIFO Control Register (write only) */
+#define FFLCR		__REG(0x4010000C)  /* Line Control Register (read/write) */
+#define FFMCR		__REG(0x40100010)  /* Modem Control Register (read/write) */
+#define FFLSR		__REG(0x40100014)  /* Line Status Register (read only) */
+#define FFMSR		__REG(0x40100018)  /* Modem Status Register (read only) */
+#define FFSPR		__REG(0x4010001C)  /* Scratch Pad Register (read/write) */
+#define FFISR		__REG(0x40100020)  /* Infrared Selection Register (read/write) */
+#define FFDLL		__REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define FFDLH		__REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Bluetooth UART (BTUART) */
+#define BTUART		BTRBR
+#define BTRBR		__REG(0x40200000)  /* Receive Buffer Register (read only) */
+#define BTTHR		__REG(0x40200000)  /* Transmit Holding Register (write only) */
+#define BTIER		__REG(0x40200004)  /* Interrupt Enable Register (read/write) */
+#define BTIIR		__REG(0x40200008)  /* Interrupt ID Register (read only) */
+#define BTFCR		__REG(0x40200008)  /* FIFO Control Register (write only) */
+#define BTLCR		__REG(0x4020000C)  /* Line Control Register (read/write) */
+#define BTMCR		__REG(0x40200010)  /* Modem Control Register (read/write) */
+#define BTLSR		__REG(0x40200014)  /* Line Status Register (read only) */
+#define BTMSR		__REG(0x40200018)  /* Modem Status Register (read only) */
+#define BTSPR		__REG(0x4020001C)  /* Scratch Pad Register (read/write) */
+#define BTISR		__REG(0x40200020)  /* Infrared Selection Register (read/write) */
+#define BTDLL		__REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define BTDLH		__REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Standard UART (STUART) */
+#define STUART		STRBR
+#define STRBR		__REG(0x40700000)  /* Receive Buffer Register (read only) */
+#define STTHR		__REG(0x40700000)  /* Transmit Holding Register (write only) */
+#define STIER		__REG(0x40700004)  /* Interrupt Enable Register (read/write) */
+#define STIIR		__REG(0x40700008)  /* Interrupt ID Register (read only) */
+#define STFCR		__REG(0x40700008)  /* FIFO Control Register (write only) */
+#define STLCR		__REG(0x4070000C)  /* Line Control Register (read/write) */
+#define STMCR		__REG(0x40700010)  /* Modem Control Register (read/write) */
+#define STLSR		__REG(0x40700014)  /* Line Status Register (read only) */
+#define STMSR		__REG(0x40700018)  /* Reserved */
+#define STSPR		__REG(0x4070001C)  /* Scratch Pad Register (read/write) */
+#define STISR		__REG(0x40700020)  /* Infrared Selection Register (read/write) */
+#define STDLL		__REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define STDLH		__REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Hardware UART (HWUART) */
+#define HWUART		HWRBR
+#define HWRBR		__REG(0x41600000)  /* Receive Buffer Register (read only) */
+#define HWTHR		__REG(0x41600000)  /* Transmit Holding Register (write only) */
+#define HWIER		__REG(0x41600004)  /* Interrupt Enable Register (read/write) */
+#define HWIIR		__REG(0x41600008)  /* Interrupt ID Register (read only) */
+#define HWFCR		__REG(0x41600008)  /* FIFO Control Register (write only) */
+#define HWLCR		__REG(0x4160000C)  /* Line Control Register (read/write) */
+#define HWMCR		__REG(0x41600010)  /* Modem Control Register (read/write) */
+#define HWLSR		__REG(0x41600014)  /* Line Status Register (read only) */
+#define HWMSR		__REG(0x41600018)  /* Modem Status Register (read only) */
+#define HWSPR		__REG(0x4160001C)  /* Scratch Pad Register (read/write) */
+#define HWISR		__REG(0x41600020)  /* Infrared Selection Register (read/write) */
+#define HWFOR		__REG(0x41600024)  /* Receive FIFO Occupancy Register (read only) */
+#define HWABR		__REG(0x41600028)  /* Auto-Baud Control Register (read/write) */
+#define HWACR		__REG(0x4160002C)  /* Auto-Baud Count Register (read only) */
+#define HWDLL		__REG(0x41600000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define HWDLH		__REG(0x41600004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+#define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
+#define IER_UUE		(1 << 6)	/* UART Unit Enable */
+#define IER_NRZE	(1 << 5)	/* NRZ coding Enable */
+#define IER_RTIOE	(1 << 4)	/* Receiver Time Out Interrupt Enable */
+#define IER_MIE		(1 << 3)	/* Modem Interrupt Enable */
+#define IER_RLSE	(1 << 2)	/* Receiver Line Status Interrupt Enable */
+#define IER_TIE		(1 << 1)	/* Transmit Data request Interrupt Enable */
+#define IER_RAVIE	(1 << 0)	/* Receiver Data Available Interrupt Enable */
+
+#define IIR_FIFOES1	(1 << 7)	/* FIFO Mode Enable Status */
+#define IIR_FIFOES0	(1 << 6)	/* FIFO Mode Enable Status */
+#define IIR_TOD		(1 << 3)	/* Time Out Detected */
+#define IIR_IID2	(1 << 2)	/* Interrupt Source Encoded */
+#define IIR_IID1	(1 << 1)	/* Interrupt Source Encoded */
+#define IIR_IP		(1 << 0)	/* Interrupt Pending (active low) */
+
+#define FCR_ITL2	(1 << 7)	/* Interrupt Trigger Level */
+#define FCR_ITL1	(1 << 6)	/* Interrupt Trigger Level */
+#define FCR_RESETTF	(1 << 2)	/* Reset Transmitter FIFO */
+#define FCR_RESETRF	(1 << 1)	/* Reset Receiver FIFO */
+#define FCR_TRFIFOE	(1 << 0)	/* Transmit and Receive FIFO Enable */
+#define FCR_ITL_1	(0)
+#define FCR_ITL_8	(FCR_ITL1)
+#define FCR_ITL_16	(FCR_ITL2)
+#define FCR_ITL_32	(FCR_ITL2|FCR_ITL1)
+
+#define LCR_DLAB	(1 << 7)	/* Divisor Latch Access Bit */
+#define LCR_SB		(1 << 6)	/* Set Break */
+#define LCR_STKYP	(1 << 5)	/* Sticky Parity */
+#define LCR_EPS		(1 << 4)	/* Even Parity Select */
+#define LCR_PEN		(1 << 3)	/* Parity Enable */
+#define LCR_STB		(1 << 2)	/* Stop Bit */
+#define LCR_WLS1	(1 << 1)	/* Word Length Select */
+#define LCR_WLS0	(1 << 0)	/* Word Length Select */
+
+#define LSR_FIFOE	(1 << 7)	/* FIFO Error Status */
+#define LSR_TEMT	(1 << 6)	/* Transmitter Empty */
+#define LSR_TDRQ	(1 << 5)	/* Transmit Data Request */
+#define LSR_BI		(1 << 4)	/* Break Interrupt */
+#define LSR_FE		(1 << 3)	/* Framing Error */
+#define LSR_PE		(1 << 2)	/* Parity Error */
+#define LSR_OE		(1 << 1)	/* Overrun Error */
+#define LSR_DR		(1 << 0)	/* Data Ready */
+
+#define MCR_LOOP	(1 << 4)
+#define MCR_OUT2	(1 << 3)	/* force MSR_DCD in loopback mode */
+#define MCR_OUT1	(1 << 2)	/* force MSR_RI in loopback mode */
+#define MCR_RTS		(1 << 1)	/* Request to Send */
+#define MCR_DTR		(1 << 0)	/* Data Terminal Ready */
+
+#define MSR_DCD		(1 << 7)	/* Data Carrier Detect */
+#define MSR_RI		(1 << 6)	/* Ring Indicator */
+#define MSR_DSR		(1 << 5)	/* Data Set Ready */
+#define MSR_CTS		(1 << 4)	/* Clear To Send */
+#define MSR_DDCD	(1 << 3)	/* Delta Data Carrier Detect */
+#define MSR_TERI	(1 << 2)	/* Trailing Edge Ring Indicator */
+#define MSR_DDSR	(1 << 1)	/* Delta Data Set Ready */
+#define MSR_DCTS	(1 << 0)	/* Delta Clear To Send */
+
+/*
+ * IrSR (Infrared Selection Register)
+ */
+#define STISR_RXPL      (1 << 4)        /* Receive Data Polarity */
+#define STISR_TXPL      (1 << 3)        /* Transmit Data Polarity */
+#define STISR_XMODE     (1 << 2)        /* Transmit Pulse Width Select */
+#define STISR_RCVEIR    (1 << 1)        /* Receiver SIR Enable */
+#define STISR_XMITIR    (1 << 0)        /* Transmitter SIR Enable */
+
+
+/*
+ * I2C registers
+ */
+
+#define IBMR		__REG(0x40301680)  /* I2C Bus Monitor Register - IBMR */
+#define IDBR		__REG(0x40301688)  /* I2C Data Buffer Register - IDBR */
+#define ICR		__REG(0x40301690)  /* I2C Control Register - ICR */
+#define ISR		__REG(0x40301698)  /* I2C Status Register - ISR */
+#define ISAR		__REG(0x403016A0)  /* I2C Slave Address Register - ISAR */
+
+#define PWRIBMR    __REG(0x40f00180)  /* Power I2C Bus Monitor Register-IBMR */
+#define PWRIDBR    __REG(0x40f00188)  /* Power I2C Data Buffer Register-IDBR */
+#define PWRICR __REG(0x40f00190)  /* Power I2C Control Register - ICR */
+#define PWRISR __REG(0x40f00198)  /* Power I2C Status Register - ISR */
+#define PWRISAR    __REG(0x40f001A0)  /*Power I2C Slave Address Register-ISAR */
+
+#define ICR_START	(1 << 0)	   /* start bit */
+#define ICR_STOP	(1 << 1)	   /* stop bit */
+#define ICR_ACKNAK	(1 << 2)	   /* send ACK(0) or NAK(1) */
+#define ICR_TB		(1 << 3)	   /* transfer byte bit */
+#define ICR_MA		(1 << 4)	   /* master abort */
+#define ICR_SCLE	(1 << 5)	   /* master clock enable */
+#define ICR_IUE		(1 << 6)	   /* unit enable */
+#define ICR_GCD		(1 << 7)	   /* general call disable */
+#define ICR_ITEIE	(1 << 8)	   /* enable tx interrupts */
+#define ICR_IRFIE	(1 << 9)	   /* enable rx interrupts */
+#define ICR_BEIE	(1 << 10)	   /* enable bus error ints */
+#define ICR_SSDIE	(1 << 11)	   /* slave STOP detected int enable */
+#define ICR_ALDIE	(1 << 12)	   /* enable arbitration interrupt */
+#define ICR_SADIE	(1 << 13)	   /* slave address detected int enable */
+#define ICR_UR		(1 << 14)	   /* unit reset */
+
+#define ISR_RWM		(1 << 0)	   /* read/write mode */
+#define ISR_ACKNAK	(1 << 1)	   /* ack/nak status */
+#define ISR_UB		(1 << 2)	   /* unit busy */
+#define ISR_IBB		(1 << 3)	   /* bus busy */
+#define ISR_SSD		(1 << 4)	   /* slave stop detected */
+#define ISR_ALD		(1 << 5)	   /* arbitration loss detected */
+#define ISR_ITE		(1 << 6)	   /* tx buffer empty */
+#define ISR_IRF		(1 << 7)	   /* rx buffer full */
+#define ISR_GCAD	(1 << 8)	   /* general call address detected */
+#define ISR_SAD		(1 << 9)	   /* slave address detected */
+#define ISR_BED		(1 << 10)	   /* bus error no ACK/NAK */
+
+
+/*
+ * Serial Audio Controller
+ */
+
+#define SACR0		__REG(0x40400000)  /* Global Control Register */
+#define SACR1		__REG(0x40400004)  /* Serial Audio I 2 S/MSB-Justified Control Register */
+#define SASR0		__REG(0x4040000C)  /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
+#define SAIMR		__REG(0x40400014)  /* Serial Audio Interrupt Mask Register */
+#define SAICR		__REG(0x40400018)  /* Serial Audio Interrupt Clear Register */
+#define SADIV		__REG(0x40400060)  /* Audio Clock Divider Register. */
+#define SADR		__REG(0x40400080)  /* Serial Audio Data Register (TX and RX FIFO access Register). */
+
+#define SACR0_RFTH(x)	((x) << 12)	/* Rx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_TFTH(x)	((x) << 8)	/* Tx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_STRF	(1 << 5)	/* FIFO Select for EFWR Special Function */
+#define SACR0_EFWR	(1 << 4)	/* Enable EFWR Function  */
+#define SACR0_RST	(1 << 3)	/* FIFO, i2s Register Reset */
+#define SACR0_BCKD	(1 << 2) 	/* Bit Clock Direction */
+#define SACR0_ENB	(1 << 0)	/* Enable I2S Link */
+#define SACR1_ENLBF	(1 << 5)	/* Enable Loopback */
+#define SACR1_DRPL	(1 << 4) 	/* Disable Replaying Function */
+#define SACR1_DREC	(1 << 3)	/* Disable Recording Function */
+#define SACR1_AMSL	(1 << 0)	/* Specify Alternate Mode */
+
+#define SASR0_I2SOFF	(1 << 7)	/* Controller Status */
+#define SASR0_ROR	(1 << 6)	/* Rx FIFO Overrun */
+#define SASR0_TUR	(1 << 5)	/* Tx FIFO Underrun */
+#define SASR0_RFS	(1 << 4)	/* Rx FIFO Service Request */
+#define SASR0_TFS	(1 << 3)	/* Tx FIFO Service Request */
+#define SASR0_BSY	(1 << 2)	/* I2S Busy */
+#define SASR0_RNE	(1 << 1)	/* Rx FIFO Not Empty */
+#define SASR0_TNF	(1 << 0) 	/* Tx FIFO Not Empty */
+
+#define SAICR_ROR	(1 << 6)	/* Clear Rx FIFO Overrun Interrupt */
+#define SAICR_TUR	(1 << 5)	/* Clear Tx FIFO Underrun Interrupt */
+
+#define SAIMR_ROR	(1 << 6)	/* Enable Rx FIFO Overrun Condition Interrupt */
+#define SAIMR_TUR	(1 << 5)	/* Enable Tx FIFO Underrun Condition Interrupt */
+#define SAIMR_RFS	(1 << 4)	/* Enable Rx FIFO Service Interrupt */
+#define SAIMR_TFS	(1 << 3)	/* Enable Tx FIFO Service Interrupt */
+
+/*
+ * AC97 Controller registers
+ */
+
+#define POCR		__REG(0x40500000)  /* PCM Out Control Register */
+#define POCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define POCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define PICR		__REG(0x40500004)  /* PCM In Control Register */
+#define PICR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define PICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MCCR		__REG(0x40500008)  /* Mic In Control Register */
+#define MCCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define MCCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define GCR		__REG(0x4050000C)  /* Global Control Register */
+#ifdef CONFIG_PXA3xx
+#define GCR_CLKBPB	(1 << 31)	/* Internal clock enable */
+#endif
+#define GCR_nDMAEN	(1 << 24)	/* non DMA Enable */
+#define GCR_CDONE_IE	(1 << 19)	/* Command Done Interrupt Enable */
+#define GCR_SDONE_IE	(1 << 18)	/* Status Done Interrupt Enable */
+#define GCR_SECRDY_IEN	(1 << 9)	/* Secondary Ready Interrupt Enable */
+#define GCR_PRIRDY_IEN	(1 << 8)	/* Primary Ready Interrupt Enable */
+#define GCR_SECRES_IEN	(1 << 5)	/* Secondary Resume Interrupt Enable */
+#define GCR_PRIRES_IEN	(1 << 4)	/* Primary Resume Interrupt Enable */
+#define GCR_ACLINK_OFF	(1 << 3)	/* AC-link Shut Off */
+#define GCR_WARM_RST	(1 << 2)	/* AC97 Warm Reset */
+#define GCR_COLD_RST	(1 << 1)	/* AC'97 Cold Reset (0 = active) */
+#define GCR_GIE		(1 << 0)	/* Codec GPI Interrupt Enable */
+
+#define POSR		__REG(0x40500010)  /* PCM Out Status Register */
+#define POSR_FIFOE	(1 << 4)	/* FIFO error */
+#define POSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define PISR		__REG(0x40500014)  /* PCM In Status Register */
+#define PISR_FIFOE	(1 << 4)	/* FIFO error */
+#define PISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define PISR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MCSR		__REG(0x40500018)  /* Mic In Status Register */
+#define MCSR_FIFOE	(1 << 4)	/* FIFO error */
+#define MCSR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define MCSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define GSR		__REG(0x4050001C)  /* Global Status Register */
+#define GSR_CDONE	(1 << 19)	/* Command Done */
+#define GSR_SDONE	(1 << 18)	/* Status Done */
+#define GSR_RDCS	(1 << 15)	/* Read Completion Status */
+#define GSR_BIT3SLT12	(1 << 14)	/* Bit 3 of slot 12 */
+#define GSR_BIT2SLT12	(1 << 13)	/* Bit 2 of slot 12 */
+#define GSR_BIT1SLT12	(1 << 12)	/* Bit 1 of slot 12 */
+#define GSR_SECRES	(1 << 11)	/* Secondary Resume Interrupt */
+#define GSR_PRIRES	(1 << 10)	/* Primary Resume Interrupt */
+#define GSR_SCR		(1 << 9)	/* Secondary Codec Ready */
+#define GSR_PCR		(1 << 8)	/*  Primary Codec Ready */
+#define GSR_MCINT	(1 << 7)	/* Mic In Interrupt */
+#define GSR_POINT	(1 << 6)	/* PCM Out Interrupt */
+#define GSR_PIINT	(1 << 5)	/* PCM In Interrupt */
+#define GSR_ACOFFD	(1 << 3)	/* AC-link Shut Off Done */
+#define GSR_MOINT	(1 << 2)	/* Modem Out Interrupt */
+#define GSR_MIINT	(1 << 1)	/* Modem In Interrupt */
+#define GSR_GSCI	(1 << 0)	/* Codec GPI Status Change Interrupt */
+
+#define CAR		__REG(0x40500020)  /* CODEC Access Register */
+#define CAR_CAIP	(1 << 0)	/* Codec Access In Progress */
+
+#define PCDR		__REG(0x40500040)  /* PCM FIFO Data Register */
+#define MCDR		__REG(0x40500060)  /* Mic-in FIFO Data Register */
+
+#define MOCR		__REG(0x40500100)  /* Modem Out Control Register */
+#define MOCR_FEIE	(1 << 3)	/* FIFO Error */
+#define MOCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MICR		__REG(0x40500108)  /* Modem In Control Register */
+#define MICR_FEIE	(1 << 3)	/* FIFO Error */
+#define MICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MOSR		__REG(0x40500110)  /* Modem Out Status Register */
+#define MOSR_FIFOE	(1 << 4)	/* FIFO error */
+#define MOSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MISR		__REG(0x40500118)  /* Modem In Status Register */
+#define MISR_FIFOE	(1 << 4)	/* FIFO error */
+#define MISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define MISR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MODR		__REG(0x40500140)  /* Modem FIFO Data Register */
+
+#define PAC_REG_BASE	__REG(0x40500200)  /* Primary Audio Codec */
+#define SAC_REG_BASE	__REG(0x40500300)  /* Secondary Audio Codec */
+#define PMC_REG_BASE	__REG(0x40500400)  /* Primary Modem Codec */
+#define SMC_REG_BASE	__REG(0x40500500)  /* Secondary Modem Codec */
+
+
+/*
+ * Fast Infrared Communication Port
+ */
+
+#define FICP		__REG(0x40800000)  /* Start of FICP area */
+#define ICCR0		__REG(0x40800000)  /* ICP Control Register 0 */
+#define ICCR1		__REG(0x40800004)  /* ICP Control Register 1 */
+#define ICCR2		__REG(0x40800008)  /* ICP Control Register 2 */
+#define ICDR		__REG(0x4080000c)  /* ICP Data Register */
+#define ICSR0		__REG(0x40800014)  /* ICP Status Register 0 */
+#define ICSR1		__REG(0x40800018)  /* ICP Status Register 1 */
+
+#define ICCR0_AME	(1 << 7)	/* Address match enable */
+#define ICCR0_TIE	(1 << 6)	/* Transmit FIFO interrupt enable */
+#define ICCR0_RIE	(1 << 5)	/* Recieve FIFO interrupt enable */
+#define ICCR0_RXE	(1 << 4)	/* Receive enable */
+#define ICCR0_TXE	(1 << 3)	/* Transmit enable */
+#define ICCR0_TUS	(1 << 2)	/* Transmit FIFO underrun select */
+#define ICCR0_LBM	(1 << 1)	/* Loopback mode */
+#define ICCR0_ITR	(1 << 0)	/* IrDA transmission */
+
+#define ICCR2_RXP       (1 << 3)	/* Receive Pin Polarity select */
+#define ICCR2_TXP       (1 << 2)	/* Transmit Pin Polarity select */
+#define ICCR2_TRIG	(3 << 0)	/* Receive FIFO Trigger threshold */
+#define ICCR2_TRIG_8    (0 << 0)	/* 	>= 8 bytes */
+#define ICCR2_TRIG_16   (1 << 0)	/*	>= 16 bytes */
+#define ICCR2_TRIG_32   (2 << 0)	/*	>= 32 bytes */
+
+#ifdef CONFIG_PXA27x
+#define ICSR0_EOC	(1 << 6)	/* DMA End of Descriptor Chain */
+#endif
+#define ICSR0_FRE	(1 << 5)	/* Framing error */
+#define ICSR0_RFS	(1 << 4)	/* Receive FIFO service request */
+#define ICSR0_TFS	(1 << 3)	/* Transnit FIFO service request */
+#define ICSR0_RAB	(1 << 2)	/* Receiver abort */
+#define ICSR0_TUR	(1 << 1)	/* Trunsmit FIFO underun */
+#define ICSR0_EIF	(1 << 0)	/* End/Error in FIFO */
+
+#define ICSR1_ROR	(1 << 6)	/* Receiver FIFO underrun  */
+#define ICSR1_CRE	(1 << 5)	/* CRC error */
+#define ICSR1_EOF	(1 << 4)	/* End of frame */
+#define ICSR1_TNF	(1 << 3)	/* Transmit FIFO not full */
+#define ICSR1_RNE	(1 << 2)	/* Receive FIFO not empty */
+#define ICSR1_TBY	(1 << 1)	/* Tramsmiter busy flag */
+#define ICSR1_RSY	(1 << 0)	/* Recevier synchronized flag */
+
+
+/*
+ * Real Time Clock
+ */
+
+#define RCNR		__REG(0x40900000)  /* RTC Count Register */
+#define RTAR		__REG(0x40900004)  /* RTC Alarm Register */
+#define RTSR		__REG(0x40900008)  /* RTC Status Register */
+#define RTTR		__REG(0x4090000C)  /* RTC Timer Trim Register */
+#define PIAR		__REG(0x40900038)  /* Periodic Interrupt Alarm Register */
+
+#define RTSR_PICE	(1 << 15)	/* Periodic interrupt count enable */
+#define RTSR_PIALE	(1 << 14)	/* Periodic interrupt Alarm enable */
+#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
+#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
+#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
+#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
+
+
+/*
+ * OS Timer & Match Registers
+ */
+
+#define OSMR0		__REG(0x40A00000)  /* */
+#define OSMR1		__REG(0x40A00004)  /* */
+#define OSMR2		__REG(0x40A00008)  /* */
+#define OSMR3		__REG(0x40A0000C)  /* */
+#define OSMR4		__REG(0x40A00080)  /* */
+#define OSCR		__REG(0x40A00010)  /* OS Timer Counter Register */
+#define OSCR4		__REG(0x40A00040)  /* OS Timer Counter Register */
+#define OMCR4		__REG(0x40A000C0)  /* */
+#define OSSR		__REG(0x40A00014)  /* OS Timer Status Register */
+#define OWER		__REG(0x40A00018)  /* OS Timer Watchdog Enable Register */
+#define OIER		__REG(0x40A0001C)  /* OS Timer Interrupt Enable Register */
+
+#define OSSR_M3		(1 << 3)	/* Match status channel 3 */
+#define OSSR_M2		(1 << 2)	/* Match status channel 2 */
+#define OSSR_M1		(1 << 1)	/* Match status channel 1 */
+#define OSSR_M0		(1 << 0)	/* Match status channel 0 */
+
+#define OWER_WME	(1 << 0)	/* Watchdog Match Enable */
+
+#define OIER_E3		(1 << 3)	/* Interrupt enable channel 3 */
+#define OIER_E2		(1 << 2)	/* Interrupt enable channel 2 */
+#define OIER_E1		(1 << 1)	/* Interrupt enable channel 1 */
+#define OIER_E0		(1 << 0)	/* Interrupt enable channel 0 */
+
+
+/*
+ * Pulse Width Modulator
+ */
+
+#define PWM_CTRL0	__REG(0x40B00000)  /* PWM 0 Control Register */
+#define PWM_PWDUTY0	__REG(0x40B00004)  /* PWM 0 Duty Cycle Register */
+#define PWM_PERVAL0	__REG(0x40B00008)  /* PWM 0 Period Control Register */
+
+#define PWM_CTRL1	__REG(0x40C00000)  /* PWM 1Control Register */
+#define PWM_PWDUTY1	__REG(0x40C00004)  /* PWM 1 Duty Cycle Register */
+#define PWM_PERVAL1	__REG(0x40C00008)  /* PWM 1 Period Control Register */
+
+
+/*
+ * Interrupt Controller
+ */
+
+#define ICIP		__REG(0x40D00000)  /* Interrupt Controller IRQ Pending Register */
+#define ICMR		__REG(0x40D00004)  /* Interrupt Controller Mask Register */
+#define ICLR		__REG(0x40D00008)  /* Interrupt Controller Level Register */
+#define ICFP		__REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
+#define ICPR		__REG(0x40D00010)  /* Interrupt Controller Pending Register */
+#define ICCR		__REG(0x40D00014)  /* Interrupt Controller Control Register */
+
+#define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
+#define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
+#define ICLR2		__REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
+#define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
+#define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
+
+/*
+ * General Purpose I/O
+ */
+
+#define GPIO0_BASE	((void __iomem *)io_p2v(0x40E00000))
+#define GPIO1_BASE	((void __iomem *)io_p2v(0x40E00004))
+#define GPIO2_BASE	((void __iomem *)io_p2v(0x40E00008))
+#define GPIO3_BASE	((void __iomem *)io_p2v(0x40E00100))
+
+#define GPLR_OFFSET	0x00
+#define GPDR_OFFSET	0x0C
+#define GPSR_OFFSET	0x18
+#define GPCR_OFFSET	0x24
+#define GRER_OFFSET	0x30
+#define GFER_OFFSET	0x3C
+#define GEDR_OFFSET	0x48
+
+#define GPLR0		__REG(0x40E00000)  /* GPIO Pin-Level Register GPIO<31:0> */
+#define GPLR1		__REG(0x40E00004)  /* GPIO Pin-Level Register GPIO<63:32> */
+#define GPLR2		__REG(0x40E00008)  /* GPIO Pin-Level Register GPIO<80:64> */
+
+#define GPDR0		__REG(0x40E0000C)  /* GPIO Pin Direction Register GPIO<31:0> */
+#define GPDR1		__REG(0x40E00010)  /* GPIO Pin Direction Register GPIO<63:32> */
+#define GPDR2		__REG(0x40E00014)  /* GPIO Pin Direction Register GPIO<80:64> */
+
+#define GPSR0		__REG(0x40E00018)  /* GPIO Pin Output Set Register GPIO<31:0> */
+#define GPSR1		__REG(0x40E0001C)  /* GPIO Pin Output Set Register GPIO<63:32> */
+#define GPSR2		__REG(0x40E00020)  /* GPIO Pin Output Set Register GPIO<80:64> */
+
+#define GPCR0		__REG(0x40E00024)  /* GPIO Pin Output Clear Register GPIO<31:0> */
+#define GPCR1		__REG(0x40E00028)  /* GPIO Pin Output Clear Register GPIO <63:32> */
+#define GPCR2		__REG(0x40E0002C)  /* GPIO Pin Output Clear Register GPIO <80:64> */
+
+#define GRER0		__REG(0x40E00030)  /* GPIO Rising-Edge Detect Register GPIO<31:0> */
+#define GRER1		__REG(0x40E00034)  /* GPIO Rising-Edge Detect Register GPIO<63:32> */
+#define GRER2		__REG(0x40E00038)  /* GPIO Rising-Edge Detect Register GPIO<80:64> */
+
+#define GFER0		__REG(0x40E0003C)  /* GPIO Falling-Edge Detect Register GPIO<31:0> */
+#define GFER1		__REG(0x40E00040)  /* GPIO Falling-Edge Detect Register GPIO<63:32> */
+#define GFER2		__REG(0x40E00044)  /* GPIO Falling-Edge Detect Register GPIO<80:64> */
+
+#define GEDR0		__REG(0x40E00048)  /* GPIO Edge Detect Status Register GPIO<31:0> */
+#define GEDR1		__REG(0x40E0004C)  /* GPIO Edge Detect Status Register GPIO<63:32> */
+#define GEDR2		__REG(0x40E00050)  /* GPIO Edge Detect Status Register GPIO<80:64> */
+
+#define GAFR0_L		__REG(0x40E00054)  /* GPIO Alternate Function Select Register GPIO<15:0> */
+#define GAFR0_U		__REG(0x40E00058)  /* GPIO Alternate Function Select Register GPIO<31:16> */
+#define GAFR1_L		__REG(0x40E0005C)  /* GPIO Alternate Function Select Register GPIO<47:32> */
+#define GAFR1_U		__REG(0x40E00060)  /* GPIO Alternate Function Select Register GPIO<63:48> */
+#define GAFR2_L		__REG(0x40E00064)  /* GPIO Alternate Function Select Register GPIO<79:64> */
+#define GAFR2_U		__REG(0x40E00068)  /* GPIO Alternate Function Select Register GPIO<95-80> */
+#define GAFR3_L		__REG(0x40E0006C)  /* GPIO Alternate Function Select Register GPIO<111:96> */
+#define GAFR3_U		__REG(0x40E00070)  /* GPIO Alternate Function Select Register GPIO<127:112> */
+
+#define GPLR3		__REG(0x40E00100)  /* GPIO Pin-Level Register GPIO<127:96> */
+#define GPDR3		__REG(0x40E0010C)  /* GPIO Pin Direction Register GPIO<127:96> */
+#define GPSR3		__REG(0x40E00118)  /* GPIO Pin Output Set Register GPIO<127:96> */
+#define GPCR3		__REG(0x40E00124)  /* GPIO Pin Output Clear Register GPIO<127:96> */
+#define GRER3		__REG(0x40E00130)  /* GPIO Rising-Edge Detect Register GPIO<127:96> */
+#define GFER3		__REG(0x40E0013C)  /* GPIO Falling-Edge Detect Register GPIO<127:96> */
+#define GEDR3		__REG(0x40E00148)  /* GPIO Edge Detect Status Register GPIO<127:96> */
+
+/* More handy macros.  The argument is a literal GPIO number. */
+
+#define GPIO_bit(x)	(1 << ((x) & 0x1f))
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+
+/* Interrupt Controller */
+
+#define _GPLR(x)	__REG2(0x40E00000, ((x) & 0x60) >> 3)
+#define _GPDR(x)	__REG2(0x40E0000C, ((x) & 0x60) >> 3)
+#define _GPSR(x)	__REG2(0x40E00018, ((x) & 0x60) >> 3)
+#define _GPCR(x)	__REG2(0x40E00024, ((x) & 0x60) >> 3)
+#define _GRER(x)	__REG2(0x40E00030, ((x) & 0x60) >> 3)
+#define _GFER(x)	__REG2(0x40E0003C, ((x) & 0x60) >> 3)
+#define _GEDR(x)	__REG2(0x40E00048, ((x) & 0x60) >> 3)
+#define _GAFR(x)	__REG2(0x40E00054, ((x) & 0x70) >> 2)
+
+#define GPLR(x) 	(*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
+#define GPDR(x)		(*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
+#define GPSR(x)		(*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
+#define GPCR(x)		(*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
+#define GRER(x)		(*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
+#define GFER(x)		(*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
+#define GEDR(x)		(*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
+#define GAFR(x)		(*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
+			 ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
+#else
+
+#define GPLR(x)		__REG2(0x40E00000, ((x) & 0x60) >> 3)
+#define GPDR(x)		__REG2(0x40E0000C, ((x) & 0x60) >> 3)
+#define GPSR(x)		__REG2(0x40E00018, ((x) & 0x60) >> 3)
+#define GPCR(x)		__REG2(0x40E00024, ((x) & 0x60) >> 3)
+#define GRER(x)		__REG2(0x40E00030, ((x) & 0x60) >> 3)
+#define GFER(x)		__REG2(0x40E0003C, ((x) & 0x60) >> 3)
+#define GEDR(x)		__REG2(0x40E00048, ((x) & 0x60) >> 3)
+#define GAFR(x)		__REG2(0x40E00054, ((x) & 0x70) >> 2)
+
+#endif
+
+/*
+ * Power Manager - see pxa2xx-regs.h
+ */
+
+/*
+ * SSP Serial Port Registers - see arch/arm/mach-pxa/include/mach/regs-ssp.h
+ */
+
+/*
+ * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h
+ */
+
+/*
+ * Core Clock - see arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+ */
+
+#ifdef CONFIG_PXA27x
+
+/* Camera Interface */
+#define CICR0		__REG(0x50000000)
+#define CICR1		__REG(0x50000004)
+#define CICR2		__REG(0x50000008)
+#define CICR3		__REG(0x5000000C)
+#define CICR4		__REG(0x50000010)
+#define CISR		__REG(0x50000014)
+#define CIFR		__REG(0x50000018)
+#define CITOR		__REG(0x5000001C)
+#define CIBR0		__REG(0x50000028)
+#define CIBR1		__REG(0x50000030)
+#define CIBR2		__REG(0x50000038)
+
+#define CICR0_DMAEN	(1 << 31)	/* DMA request enable */
+#define CICR0_PAR_EN	(1 << 30)	/* Parity enable */
+#define CICR0_SL_CAP_EN	(1 << 29)	/* Capture enable for slave mode */
+#define CICR0_ENB	(1 << 28)	/* Camera interface enable */
+#define CICR0_DIS	(1 << 27)	/* Camera interface disable */
+#define CICR0_SIM	(0x7 << 24)	/* Sensor interface mode mask */
+#define CICR0_TOM	(1 << 9)	/* Time-out mask */
+#define CICR0_RDAVM	(1 << 8)	/* Receive-data-available mask */
+#define CICR0_FEM	(1 << 7)	/* FIFO-empty mask */
+#define CICR0_EOLM	(1 << 6)	/* End-of-line mask */
+#define CICR0_PERRM	(1 << 5)	/* Parity-error mask */
+#define CICR0_QDM	(1 << 4)	/* Quick-disable mask */
+#define CICR0_CDM	(1 << 3)	/* Disable-done mask */
+#define CICR0_SOFM	(1 << 2)	/* Start-of-frame mask */
+#define CICR0_EOFM	(1 << 1)	/* End-of-frame mask */
+#define CICR0_FOM	(1 << 0)	/* FIFO-overrun mask */
+
+#define CICR1_TBIT	(1 << 31)	/* Transparency bit */
+#define CICR1_RGBT_CONV	(0x3 << 29)	/* RGBT conversion mask */
+#define CICR1_PPL	(0x7ff << 15)	/* Pixels per line mask */
+#define CICR1_RGB_CONV	(0x7 << 12)	/* RGB conversion mask */
+#define CICR1_RGB_F	(1 << 11)	/* RGB format */
+#define CICR1_YCBCR_F	(1 << 10)	/* YCbCr format */
+#define CICR1_RGB_BPP	(0x7 << 7)	/* RGB bis per pixel mask */
+#define CICR1_RAW_BPP	(0x3 << 5)	/* Raw bis per pixel mask */
+#define CICR1_COLOR_SP	(0x3 << 3)	/* Color space mask */
+#define CICR1_DW	(0x7 << 0)	/* Data width mask */
+
+#define CICR2_BLW	(0xff << 24)	/* Beginning-of-line pixel clock
+					   wait count mask */
+#define CICR2_ELW	(0xff << 16)	/* End-of-line pixel clock
+					   wait count mask */
+#define CICR2_HSW	(0x3f << 10)	/* Horizontal sync pulse width mask */
+#define CICR2_BFPW	(0x3f << 3)	/* Beginning-of-frame pixel clock
+					   wait count mask */
+#define CICR2_FSW	(0x7 << 0)	/* Frame stabilization
+					   wait count mask */
+
+#define CICR3_BFW	(0xff << 24)	/* Beginning-of-frame line clock
+					   wait count mask */
+#define CICR3_EFW	(0xff << 16)	/* End-of-frame line clock
+					   wait count mask */
+#define CICR3_VSW	(0x3f << 10)	/* Vertical sync pulse width mask */
+#define CICR3_BFPW	(0x3f << 3)	/* Beginning-of-frame pixel clock
+					   wait count mask */
+#define CICR3_LPF	(0x7ff << 0)	/* Lines per frame mask */
+
+#define CICR4_MCLK_DLY	(0x3 << 24)	/* MCLK Data Capture Delay mask */
+#define CICR4_PCLK_EN	(1 << 23)	/* Pixel clock enable */
+#define CICR4_PCP	(1 << 22)	/* Pixel clock polarity */
+#define CICR4_HSP	(1 << 21)	/* Horizontal sync polarity */
+#define CICR4_VSP	(1 << 20)	/* Vertical sync polarity */
+#define CICR4_MCLK_EN	(1 << 19)	/* MCLK enable */
+#define CICR4_FR_RATE	(0x7 << 8)	/* Frame rate mask */
+#define CICR4_DIV	(0xff << 0)	/* Clock divisor mask */
+
+#define CISR_FTO	(1 << 15)	/* FIFO time-out */
+#define CISR_RDAV_2	(1 << 14)	/* Channel 2 receive data available */
+#define CISR_RDAV_1	(1 << 13)	/* Channel 1 receive data available */
+#define CISR_RDAV_0	(1 << 12)	/* Channel 0 receive data available */
+#define CISR_FEMPTY_2	(1 << 11)	/* Channel 2 FIFO empty */
+#define CISR_FEMPTY_1	(1 << 10)	/* Channel 1 FIFO empty */
+#define CISR_FEMPTY_0	(1 << 9)	/* Channel 0 FIFO empty */
+#define CISR_EOL	(1 << 8)	/* End of line */
+#define CISR_PAR_ERR	(1 << 7)	/* Parity error */
+#define CISR_CQD	(1 << 6)	/* Camera interface quick disable */
+#define CISR_CDD	(1 << 5)	/* Camera interface disable done */
+#define CISR_SOF	(1 << 4)	/* Start of frame */
+#define CISR_EOF	(1 << 3)	/* End of frame */
+#define CISR_IFO_2	(1 << 2)	/* FIFO overrun for Channel 2 */
+#define CISR_IFO_1	(1 << 1)	/* FIFO overrun for Channel 1 */
+#define CISR_IFO_0	(1 << 0)	/* FIFO overrun for Channel 0 */
+
+#define CIFR_FLVL2	(0x7f << 23)	/* FIFO 2 level mask */
+#define CIFR_FLVL1	(0x7f << 16)	/* FIFO 1 level mask */
+#define CIFR_FLVL0	(0xff << 8)	/* FIFO 0 level mask */
+#define CIFR_THL_0	(0x3 << 4)	/* Threshold Level for Channel 0 FIFO */
+#define CIFR_RESET_F	(1 << 3)	/* Reset input FIFOs */
+#define CIFR_FEN2	(1 << 2)	/* FIFO enable for channel 2 */
+#define CIFR_FEN1	(1 << 1)	/* FIFO enable for channel 1 */
+#define CIFR_FEN0	(1 << 0)	/* FIFO enable for channel 0 */
+
+#define SRAM_SIZE		0x40000 /* 4x64K  */
+
+#define SRAM_MEM_PHYS		0x5C000000
+
+#define IMPMCR		__REG(0x58000000) /* IM Power Management Control Reg */
+#define IMPMSR		__REG(0x58000008) /* IM Power Management Status Reg */
+
+#define IMPMCR_PC3		(0x3 << 22) /* Bank 3 Power Control */
+#define IMPMCR_PC3_RUN_MODE	(0x0 << 22) /*   Run mode */
+#define IMPMCR_PC3_STANDBY_MODE	(0x1 << 22) /*   Standby mode */
+#define IMPMCR_PC3_AUTO_MODE	(0x3 << 22) /*   Automatically controlled */
+
+#define IMPMCR_PC2		(0x3 << 20) /* Bank 2 Power Control */
+#define IMPMCR_PC2_RUN_MODE	(0x0 << 20) /*   Run mode */
+#define IMPMCR_PC2_STANDBY_MODE	(0x1 << 20) /*   Standby mode */
+#define IMPMCR_PC2_AUTO_MODE	(0x3 << 20) /*   Automatically controlled */
+
+#define IMPMCR_PC1		(0x3 << 18) /* Bank 1 Power Control */
+#define IMPMCR_PC1_RUN_MODE	(0x0 << 18) /*   Run mode */
+#define IMPMCR_PC1_STANDBY_MODE	(0x1 << 18) /*   Standby mode */
+#define IMPMCR_PC1_AUTO_MODE	(0x3 << 18) /*   Automatically controlled */
+
+#define IMPMCR_PC0		(0x3 << 16) /* Bank 0 Power Control */
+#define IMPMCR_PC0_RUN_MODE	(0x0 << 16) /*   Run mode */
+#define IMPMCR_PC0_STANDBY_MODE	(0x1 << 16) /*   Standby mode */
+#define IMPMCR_PC0_AUTO_MODE	(0x3 << 16) /*   Automatically controlled */
+
+#define IMPMCR_AW3		(1 << 11) /* Bank 3 Automatic Wake-up enable */
+#define IMPMCR_AW2		(1 << 10) /* Bank 2 Automatic Wake-up enable */
+#define IMPMCR_AW1		(1 << 9)  /* Bank 1 Automatic Wake-up enable */
+#define IMPMCR_AW0		(1 << 8)  /* Bank 0 Automatic Wake-up enable */
+
+#define IMPMCR_DST		(0xFF << 0) /* Delay Standby Time, ms */
+
+#define IMPMSR_PS3		(0x3 << 6) /* Bank 3 Power Status: */
+#define IMPMSR_PS3_RUN_MODE	(0x0 << 6) /*    Run mode */
+#define IMPMSR_PS3_STANDBY_MODE	(0x1 << 6) /*    Standby mode */
+
+#define IMPMSR_PS2		(0x3 << 4) /* Bank 2 Power Status: */
+#define IMPMSR_PS2_RUN_MODE	(0x0 << 4) /*    Run mode */
+#define IMPMSR_PS2_STANDBY_MODE	(0x1 << 4) /*    Standby mode */
+
+#define IMPMSR_PS1		(0x3 << 2) /* Bank 1 Power Status: */
+#define IMPMSR_PS1_RUN_MODE	(0x0 << 2) /*    Run mode */
+#define IMPMSR_PS1_STANDBY_MODE	(0x1 << 2) /*    Standby mode */
+
+#define IMPMSR_PS0		(0x3 << 0) /* Bank 0 Power Status: */
+#define IMPMSR_PS0_RUN_MODE	(0x0 << 0) /*    Run mode */
+#define IMPMSR_PS0_STANDBY_MODE	(0x1 << 0) /*    Standby mode */
+
+#endif
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+/*
+ * UHC: USB Host Controller (OHCI-like) register definitions
+ */
+#define UHC_BASE_PHYS	(0x4C000000)
+#define UHCREV		__REG(0x4C000000) /* UHC HCI Spec Revision */
+#define UHCHCON		__REG(0x4C000004) /* UHC Host Control Register */
+#define UHCCOMS		__REG(0x4C000008) /* UHC Command Status Register */
+#define UHCINTS		__REG(0x4C00000C) /* UHC Interrupt Status Register */
+#define UHCINTE		__REG(0x4C000010) /* UHC Interrupt Enable */
+#define UHCINTD		__REG(0x4C000014) /* UHC Interrupt Disable */
+#define UHCHCCA		__REG(0x4C000018) /* UHC Host Controller Comm. Area */
+#define UHCPCED		__REG(0x4C00001C) /* UHC Period Current Endpt Descr */
+#define UHCCHED		__REG(0x4C000020) /* UHC Control Head Endpt Descr */
+#define UHCCCED		__REG(0x4C000024) /* UHC Control Current Endpt Descr */
+#define UHCBHED		__REG(0x4C000028) /* UHC Bulk Head Endpt Descr */
+#define UHCBCED		__REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */
+#define UHCDHEAD	__REG(0x4C000030) /* UHC Done Head */
+#define UHCFMI		__REG(0x4C000034) /* UHC Frame Interval */
+#define UHCFMR		__REG(0x4C000038) /* UHC Frame Remaining */
+#define UHCFMN		__REG(0x4C00003C) /* UHC Frame Number */
+#define UHCPERS		__REG(0x4C000040) /* UHC Periodic Start */
+#define UHCLS		__REG(0x4C000044) /* UHC Low Speed Threshold */
+
+#define UHCRHDA		__REG(0x4C000048) /* UHC Root Hub Descriptor A */
+#define UHCRHDA_NOCP	(1 << 12)	/* No over current protection */
+
+#define UHCRHDB		__REG(0x4C00004C) /* UHC Root Hub Descriptor B */
+#define UHCRHS		__REG(0x4C000050) /* UHC Root Hub Status */
+#define UHCRHPS1	__REG(0x4C000054) /* UHC Root Hub Port 1 Status */
+#define UHCRHPS2	__REG(0x4C000058) /* UHC Root Hub Port 2 Status */
+#define UHCRHPS3	__REG(0x4C00005C) /* UHC Root Hub Port 3 Status */
+
+#define UHCSTAT		__REG(0x4C000060) /* UHC Status Register */
+#define UHCSTAT_UPS3	(1 << 16)	/* USB Power Sense Port3 */
+#define UHCSTAT_SBMAI	(1 << 15)	/* System Bus Master Abort Interrupt*/
+#define UHCSTAT_SBTAI	(1 << 14)	/* System Bus Target Abort Interrupt*/
+#define UHCSTAT_UPRI	(1 << 13)	/* USB Port Resume Interrupt */
+#define UHCSTAT_UPS2	(1 << 12)	/* USB Power Sense Port 2 */
+#define UHCSTAT_UPS1	(1 << 11)	/* USB Power Sense Port 1 */
+#define UHCSTAT_HTA	(1 << 10)	/* HCI Target Abort */
+#define UHCSTAT_HBA	(1 << 8)	/* HCI Buffer Active */
+#define UHCSTAT_RWUE	(1 << 7)	/* HCI Remote Wake Up Event */
+
+#define UHCHR           __REG(0x4C000064) /* UHC Reset Register */
+#define UHCHR_SSEP3	(1 << 11)	/* Sleep Standby Enable for Port3 */
+#define UHCHR_SSEP2	(1 << 10)	/* Sleep Standby Enable for Port2 */
+#define UHCHR_SSEP1	(1 << 9)	/* Sleep Standby Enable for Port1 */
+#define UHCHR_PCPL	(1 << 7)	/* Power control polarity low */
+#define UHCHR_PSPL	(1 << 6)	/* Power sense polarity low */
+#define UHCHR_SSE	(1 << 5)	/* Sleep Standby Enable */
+#define UHCHR_UIT	(1 << 4)	/* USB Interrupt Test */
+#define UHCHR_SSDC	(1 << 3)	/* Simulation Scale Down Clock */
+#define UHCHR_CGR	(1 << 2)	/* Clock Generation Reset */
+#define UHCHR_FHR	(1 << 1)	/* Force Host Controller Reset */
+#define UHCHR_FSBIR	(1 << 0)	/* Force System Bus Iface Reset */
+
+#define UHCHIE          __REG(0x4C000068) /* UHC Interrupt Enable Register*/
+#define UHCHIE_UPS3IE	(1 << 14)	/* Power Sense Port3 IntEn */
+#define UHCHIE_UPRIE	(1 << 13)	/* Port Resume IntEn */
+#define UHCHIE_UPS2IE	(1 << 12)	/* Power Sense Port2 IntEn */
+#define UHCHIE_UPS1IE	(1 << 11)	/* Power Sense Port1 IntEn */
+#define UHCHIE_TAIE	(1 << 10)	/* HCI Interface Transfer Abort
+					   Interrupt Enable*/
+#define UHCHIE_HBAIE	(1 << 8)	/* HCI Buffer Active IntEn */
+#define UHCHIE_RWIE	(1 << 7)	/* Remote Wake-up IntEn */
+
+#define UHCHIT          __REG(0x4C00006C) /* UHC Interrupt Test register */
+
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+
+/* PWRMODE register M field values */
+
+#define PWRMODE_IDLE		0x1
+#define PWRMODE_STANDBY		0x2
+#define PWRMODE_SLEEP		0x3
+#define PWRMODE_DEEPSLEEP	0x7
+
+#endif
diff --git a/include/asm-arm/arch-pxa/pxa25x-udc.h b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
similarity index 100%
rename from include/asm-arm/arch-pxa/pxa25x-udc.h
rename to arch/arm/mach-pxa/include/mach/pxa25x-udc.h
diff --git a/include/asm-arm/arch-pxa/pxa27x-udc.h b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
similarity index 100%
rename from include/asm-arm/arch-pxa/pxa27x-udc.h
rename to arch/arm/mach-pxa/include/mach/pxa27x-udc.h
diff --git a/include/asm-arm/arch-pxa/pxa27x_keypad.h b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
similarity index 100%
rename from include/asm-arm/arch-pxa/pxa27x_keypad.h
rename to arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
similarity index 100%
rename from include/asm-arm/arch-pxa/pxa2xx-gpio.h
rename to arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
new file mode 100644
index 0000000..806ecfe
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -0,0 +1,246 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+ *
+ *  Taken from pxa-regs.h by Russell King
+ *
+ *  Author:	Nicolas Pitre
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PXA2XX_REGS_H
+#define __PXA2XX_REGS_H
+
+/*
+ * Memory controller
+ */
+
+#define MDCNFG		__REG(0x48000000)  /* SDRAM Configuration Register 0 */
+#define MDREFR		__REG(0x48000004)  /* SDRAM Refresh Control Register */
+#define MSC0		__REG(0x48000008)  /* Static Memory Control Register 0 */
+#define MSC1		__REG(0x4800000C)  /* Static Memory Control Register 1 */
+#define MSC2		__REG(0x48000010)  /* Static Memory Control Register 2 */
+#define MECR		__REG(0x48000014)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR		__REG(0x48000018)  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG		__REG(0x4800001C)  /* Synchronous Static Memory Control Register */
+#define SXMRS		__REG(0x48000024)  /* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0		__REG(0x48000028)  /* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1		__REG(0x4800002C)  /* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0		__REG(0x48000030)  /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1		__REG(0x48000034)  /* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0		__REG(0x48000038)  /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1		__REG(0x4800003C)  /* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS		__REG(0x48000040)  /* MRS value to be written to SDRAM */
+#define BOOT_DEF	__REG(0x48000044)  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+
+/*
+ * More handy macros for PCMCIA
+ *
+ * Arg is socket number
+ */
+#define MCMEM(s)	__REG2(0x48000028, (s)<<2 )  /* Card interface Common Memory Space Socket s Timing */
+#define MCATT(s)	__REG2(0x48000030, (s)<<2 )  /* Card interface Attribute Space Socket s Timing Configuration */
+#define MCIO(s)		__REG2(0x48000038, (s)<<2 )  /* Card interface I/O Space Socket s Timing Configuration */
+
+/* MECR register defines */
+#define MECR_NOS	(1 << 0)	/* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
+#define MECR_CIT	(1 << 1)	/* Card Is There: 0 -> no card, 1 -> card inserted */
+
+#define MDREFR_K0DB4	(1 << 29)	/* SDCLK0 Divide by 4 Control/Status */
+#define MDREFR_K2FREE	(1 << 25)	/* SDRAM Free-Running Control */
+#define MDREFR_K1FREE	(1 << 24)	/* SDRAM Free-Running Control */
+#define MDREFR_K0FREE	(1 << 23)	/* SDRAM Free-Running Control */
+#define MDREFR_SLFRSH	(1 << 22)	/* SDRAM Self-Refresh Control/Status */
+#define MDREFR_APD	(1 << 20)	/* SDRAM/SSRAM Auto-Power-Down Enable */
+#define MDREFR_K2DB2	(1 << 19)	/* SDCLK2 Divide by 2 Control/Status */
+#define MDREFR_K2RUN	(1 << 18)	/* SDCLK2 Run Control/Status */
+#define MDREFR_K1DB2	(1 << 17)	/* SDCLK1 Divide by 2 Control/Status */
+#define MDREFR_K1RUN	(1 << 16)	/* SDCLK1 Run Control/Status */
+#define MDREFR_E1PIN	(1 << 15)	/* SDCKE1 Level Control/Status */
+#define MDREFR_K0DB2	(1 << 14)	/* SDCLK0 Divide by 2 Control/Status */
+#define MDREFR_K0RUN	(1 << 13)	/* SDCLK0 Run Control/Status */
+#define MDREFR_E0PIN	(1 << 12)	/* SDCKE0 Level Control/Status */
+
+
+#ifdef CONFIG_PXA27x
+
+#define ARB_CNTRL	__REG(0x48000048)  /* Arbiter Control Register */
+
+#define ARB_DMA_SLV_PARK	(1<<31)	   /* Be parked with DMA slave when idle */
+#define ARB_CI_PARK		(1<<30)	   /* Be parked with Camera Interface when idle */
+#define ARB_EX_MEM_PARK 	(1<<29)	   /* Be parked with external MEMC when idle */
+#define ARB_INT_MEM_PARK	(1<<28)	   /* Be parked with internal MEMC when idle */
+#define ARB_USB_PARK		(1<<27)	   /* Be parked with USB when idle */
+#define ARB_LCD_PARK		(1<<26)	   /* Be parked with LCD when idle */
+#define ARB_DMA_PARK		(1<<25)	   /* Be parked with DMA when idle */
+#define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
+#define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
+
+#endif
+
+
+/*
+ * Power Manager
+ */
+
+#define PMCR		__REG(0x40F00000)  /* Power Manager Control Register */
+#define PSSR		__REG(0x40F00004)  /* Power Manager Sleep Status Register */
+#define PSPR		__REG(0x40F00008)  /* Power Manager Scratch Pad Register */
+#define PWER		__REG(0x40F0000C)  /* Power Manager Wake-up Enable Register */
+#define PRER		__REG(0x40F00010)  /* Power Manager GPIO Rising-Edge Detect Enable Register */
+#define PFER		__REG(0x40F00014)  /* Power Manager GPIO Falling-Edge Detect Enable Register */
+#define PEDR		__REG(0x40F00018)  /* Power Manager GPIO Edge Detect Status Register */
+#define PCFR		__REG(0x40F0001C)  /* Power Manager General Configuration Register */
+#define PGSR0		__REG(0x40F00020)  /* Power Manager GPIO Sleep State Register for GP[31-0] */
+#define PGSR1		__REG(0x40F00024)  /* Power Manager GPIO Sleep State Register for GP[63-32] */
+#define PGSR2		__REG(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
+#define PGSR3		__REG(0x40F0002C)  /* Power Manager GPIO Sleep State Register for GP[118-96] */
+#define RCSR		__REG(0x40F00030)  /* Reset Controller Status Register */
+
+#define PSLR		__REG(0x40F00034)	/* Power Manager Sleep Config Register */
+#define PSTR		__REG(0x40F00038)	/* Power Manager Standby Config Register */
+#define PSNR		__REG(0x40F0003C)	/* Power Manager Sense Config Register */
+#define PVCR		__REG(0x40F00040)	/* Power Manager VoltageControl Register */
+#define PKWR		__REG(0x40F00050)	/* Power Manager KB Wake-up Enable Reg */
+#define PKSR		__REG(0x40F00054)	/* Power Manager KB Level-Detect Register */
+#define PCMD(x)	__REG2(0x40F00080, (x)<<2)
+#define PCMD0	__REG(0x40F00080 + 0 * 4)
+#define PCMD1	__REG(0x40F00080 + 1 * 4)
+#define PCMD2	__REG(0x40F00080 + 2 * 4)
+#define PCMD3	__REG(0x40F00080 + 3 * 4)
+#define PCMD4	__REG(0x40F00080 + 4 * 4)
+#define PCMD5	__REG(0x40F00080 + 5 * 4)
+#define PCMD6	__REG(0x40F00080 + 6 * 4)
+#define PCMD7	__REG(0x40F00080 + 7 * 4)
+#define PCMD8	__REG(0x40F00080 + 8 * 4)
+#define PCMD9	__REG(0x40F00080 + 9 * 4)
+#define PCMD10	__REG(0x40F00080 + 10 * 4)
+#define PCMD11	__REG(0x40F00080 + 11 * 4)
+#define PCMD12	__REG(0x40F00080 + 12 * 4)
+#define PCMD13	__REG(0x40F00080 + 13 * 4)
+#define PCMD14	__REG(0x40F00080 + 14 * 4)
+#define PCMD15	__REG(0x40F00080 + 15 * 4)
+#define PCMD16	__REG(0x40F00080 + 16 * 4)
+#define PCMD17	__REG(0x40F00080 + 17 * 4)
+#define PCMD18	__REG(0x40F00080 + 18 * 4)
+#define PCMD19	__REG(0x40F00080 + 19 * 4)
+#define PCMD20	__REG(0x40F00080 + 20 * 4)
+#define PCMD21	__REG(0x40F00080 + 21 * 4)
+#define PCMD22	__REG(0x40F00080 + 22 * 4)
+#define PCMD23	__REG(0x40F00080 + 23 * 4)
+#define PCMD24	__REG(0x40F00080 + 24 * 4)
+#define PCMD25	__REG(0x40F00080 + 25 * 4)
+#define PCMD26	__REG(0x40F00080 + 26 * 4)
+#define PCMD27	__REG(0x40F00080 + 27 * 4)
+#define PCMD28	__REG(0x40F00080 + 28 * 4)
+#define PCMD29	__REG(0x40F00080 + 29 * 4)
+#define PCMD30	__REG(0x40F00080 + 30 * 4)
+#define PCMD31	__REG(0x40F00080 + 31 * 4)
+
+#define PCMD_MBC	(1<<12)
+#define PCMD_DCE	(1<<11)
+#define PCMD_LC	(1<<10)
+/* FIXME:  PCMD_SQC need be checked.   */
+#define PCMD_SQC	(3<<8)	/* currently only bit 8 is changeable,
+				   bit 9 should be 0 all day. */
+#define PVCR_VCSA	(0x1<<14)
+#define PVCR_CommandDelay (0xf80)
+#define PCFR_PI2C_EN	(0x1 << 6)
+
+#define PSSR_OTGPH	(1 << 6)	/* OTG Peripheral control Hold */
+#define PSSR_RDH	(1 << 5)	/* Read Disable Hold */
+#define PSSR_PH		(1 << 4)	/* Peripheral Control Hold */
+#define PSSR_STS	(1 << 3)	/* Standby Mode Status */
+#define PSSR_VFS	(1 << 2)	/* VDD Fault Status */
+#define PSSR_BFS	(1 << 1)	/* Battery Fault Status */
+#define PSSR_SSS	(1 << 0)	/* Software Sleep Status */
+
+#define PSLR_SL_ROD	(1 << 20)	/* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
+
+#define PCFR_RO		(1 << 15)	/* RDH Override */
+#define PCFR_PO		(1 << 14)	/* PH Override */
+#define PCFR_GPROD	(1 << 12)	/* GPIO nRESET_OUT Disable */
+#define PCFR_L1_EN	(1 << 11)	/* Sleep Mode L1 converter Enable */
+#define PCFR_FVC	(1 << 10)	/* Frequency/Voltage Change */
+#define PCFR_DC_EN	(1 << 7)	/* Sleep/deep-sleep DC-DC Converter Enable */
+#define PCFR_PI2CEN	(1 << 6)	/* Enable PI2C controller */
+#define PCFR_GPR_EN	(1 << 4)	/* nRESET_GPIO Pin Enable */
+#define PCFR_DS		(1 << 3)	/* Deep Sleep Mode */
+#define PCFR_FS		(1 << 2)	/* Float Static Chip Selects */
+#define PCFR_FP		(1 << 1)	/* Float PCMCIA controls */
+#define PCFR_OPDE	(1 << 0)	/* 3.6864 MHz oscillator power-down enable */
+
+#define RCSR_GPR	(1 << 3)	/* GPIO Reset */
+#define RCSR_SMR	(1 << 2)	/* Sleep Mode */
+#define RCSR_WDR	(1 << 1)	/* Watchdog Reset */
+#define RCSR_HWR	(1 << 0)	/* Hardware Reset */
+
+#define PWER_GPIO(Nb)	(1 << Nb)	/* GPIO [0..15] wake-up enable     */
+#define PWER_GPIO0	PWER_GPIO (0)	/* GPIO  [0] wake-up enable        */
+#define PWER_GPIO1	PWER_GPIO (1)	/* GPIO  [1] wake-up enable        */
+#define PWER_GPIO2	PWER_GPIO (2)	/* GPIO  [2] wake-up enable        */
+#define PWER_GPIO3	PWER_GPIO (3)	/* GPIO  [3] wake-up enable        */
+#define PWER_GPIO4	PWER_GPIO (4)	/* GPIO  [4] wake-up enable        */
+#define PWER_GPIO5	PWER_GPIO (5)	/* GPIO  [5] wake-up enable        */
+#define PWER_GPIO6	PWER_GPIO (6)	/* GPIO  [6] wake-up enable        */
+#define PWER_GPIO7	PWER_GPIO (7)	/* GPIO  [7] wake-up enable        */
+#define PWER_GPIO8	PWER_GPIO (8)	/* GPIO  [8] wake-up enable        */
+#define PWER_GPIO9	PWER_GPIO (9)	/* GPIO  [9] wake-up enable        */
+#define PWER_GPIO10	PWER_GPIO (10)	/* GPIO [10] wake-up enable        */
+#define PWER_GPIO11	PWER_GPIO (11)	/* GPIO [11] wake-up enable        */
+#define PWER_GPIO12	PWER_GPIO (12)	/* GPIO [12] wake-up enable        */
+#define PWER_GPIO13	PWER_GPIO (13)	/* GPIO [13] wake-up enable        */
+#define PWER_GPIO14	PWER_GPIO (14)	/* GPIO [14] wake-up enable        */
+#define PWER_GPIO15	PWER_GPIO (15)	/* GPIO [15] wake-up enable        */
+#define PWER_RTC	0x80000000	/* RTC alarm wake-up enable        */
+
+/*
+ * PXA2xx specific Core clock definitions
+ */
+#define CCCR		__REG(0x41300000)  /* Core Clock Configuration Register */
+#define CCSR		__REG(0x4130000C)  /* Core Clock Status Register */
+#define CKEN		__REG(0x41300004)  /* Clock Enable Register */
+#define OSCC		__REG(0x41300008)  /* Oscillator Configuration Register */
+
+#define CCCR_N_MASK	0x0380	/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define CCCR_M_MASK	0x0060	/* Memory Frequency to Run Mode Frequency Multiplier */
+#define CCCR_L_MASK	0x001f	/* Crystal Frequency to Memory Frequency Multiplier */
+
+#define CKEN_AC97CONF   (31)    /* AC97 Controller Configuration */
+#define CKEN_CAMERA	(24)	/* Camera Interface Clock Enable */
+#define CKEN_SSP1	(23)	/* SSP1 Unit Clock Enable */
+#define CKEN_MEMC	(22)	/* Memory Controller Clock Enable */
+#define CKEN_MEMSTK	(21)	/* Memory Stick Host Controller */
+#define CKEN_IM		(20)	/* Internal Memory Clock Enable */
+#define CKEN_KEYPAD	(19)	/* Keypad Interface Clock Enable */
+#define CKEN_USIM	(18)	/* USIM Unit Clock Enable */
+#define CKEN_MSL	(17)	/* MSL Unit Clock Enable */
+#define CKEN_LCD	(16)	/* LCD Unit Clock Enable */
+#define CKEN_PWRI2C	(15)	/* PWR I2C Unit Clock Enable */
+#define CKEN_I2C	(14)	/* I2C Unit Clock Enable */
+#define CKEN_FICP	(13)	/* FICP Unit Clock Enable */
+#define CKEN_MMC	(12)	/* MMC Unit Clock Enable */
+#define CKEN_USB	(11)	/* USB Unit Clock Enable */
+#define CKEN_ASSP	(10)	/* ASSP (SSP3) Clock Enable */
+#define CKEN_USBHOST	(10)	/* USB Host Unit Clock Enable */
+#define CKEN_OSTIMER	(9)	/* OS Timer Unit Clock Enable */
+#define CKEN_NSSP	(9)	/* NSSP (SSP2) Clock Enable */
+#define CKEN_I2S	(8)	/* I2S Unit Clock Enable */
+#define CKEN_BTUART	(7)	/* BTUART Unit Clock Enable */
+#define CKEN_FFUART	(6)	/* FFUART Unit Clock Enable */
+#define CKEN_STUART	(5)	/* STUART Unit Clock Enable */
+#define CKEN_HWUART	(4)	/* HWUART Unit Clock Enable */
+#define CKEN_SSP3	(4)	/* SSP3 Unit Clock Enable */
+#define CKEN_SSP	(3)	/* SSP Unit Clock Enable */
+#define CKEN_SSP2	(3)	/* SSP2 Unit Clock Enable */
+#define CKEN_AC97	(2)	/* AC97 Unit Clock Enable */
+#define CKEN_PWM1	(1)	/* PWM1 Clock Enable */
+#define CKEN_PWM0	(0)	/* PWM0 Clock Enable */
+
+#define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
+#define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */
+
+#endif
diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
similarity index 100%
rename from include/asm-arm/arch-pxa/pxa2xx_spi.h
rename to arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
new file mode 100644
index 0000000..39eb683
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -0,0 +1,183 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+ *
+ * PXA3xx specific register definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_PXA3XX_REGS_H
+#define __ASM_ARCH_PXA3XX_REGS_H
+
+/*
+ * Oscillator Configuration Register (OSCC)
+ */
+#define OSCC           __REG(0x41350000)  /* Oscillator Configuration Register */
+
+#define OSCC_PEN       (1 << 11)       /* 13MHz POUT */
+
+
+/*
+ * Service Power Management Unit (MPMU)
+ */
+#define PMCR		__REG(0x40F50000)	/* Power Manager Control Register */
+#define PSR		__REG(0x40F50004)	/* Power Manager S2 Status Register */
+#define PSPR		__REG(0x40F50008)	/* Power Manager Scratch Pad Register */
+#define PCFR		__REG(0x40F5000C)	/* Power Manager General Configuration Register */
+#define PWER		__REG(0x40F50010)	/* Power Manager Wake-up Enable Register */
+#define PWSR		__REG(0x40F50014)	/* Power Manager Wake-up Status Register */
+#define PECR		__REG(0x40F50018)	/* Power Manager EXT_WAKEUP[1:0] Control Register */
+#define DCDCSR		__REG(0x40F50080)	/* DC-DC Controller Status Register */
+#define PVCR		__REG(0x40F50100)	/* Power Manager Voltage Change Control Register */
+#define PCMD(x)		__REG(0x40F50110 + ((x) << 2))
+
+/*
+ * Slave Power Managment Unit
+ */
+#define ASCR		__REG(0x40f40000)	/* Application Subsystem Power Status/Configuration */
+#define ARSR		__REG(0x40f40004)	/* Application Subsystem Reset Status */
+#define AD3ER		__REG(0x40f40008)	/* Application Subsystem Wake-Up from D3 Enable */
+#define AD3SR		__REG(0x40f4000c)	/* Application Subsystem Wake-Up from D3 Status */
+#define AD2D0ER		__REG(0x40f40010)	/* Application Subsystem Wake-Up from D2 to D0 Enable */
+#define AD2D0SR		__REG(0x40f40014)	/* Application Subsystem Wake-Up from D2 to D0 Status */
+#define AD2D1ER		__REG(0x40f40018)	/* Application Subsystem Wake-Up from D2 to D1 Enable */
+#define AD2D1SR		__REG(0x40f4001c)	/* Application Subsystem Wake-Up from D2 to D1 Status */
+#define AD1D0ER		__REG(0x40f40020)	/* Application Subsystem Wake-Up from D1 to D0 Enable */
+#define AD1D0SR		__REG(0x40f40024)	/* Application Subsystem Wake-Up from D1 to D0 Status */
+#define AGENP		__REG(0x40f4002c)	/* Application Subsystem General Purpose */
+#define AD3R		__REG(0x40f40030)	/* Application Subsystem D3 Configuration */
+#define AD2R		__REG(0x40f40034)	/* Application Subsystem D2 Configuration */
+#define AD1R		__REG(0x40f40038)	/* Application Subsystem D1 Configuration */
+
+/*
+ * Application Subsystem Configuration bits.
+ */
+#define ASCR_RDH		(1 << 31)
+#define ASCR_D1S		(1 << 2)
+#define ASCR_D2S		(1 << 1)
+#define ASCR_D3S		(1 << 0)
+
+/*
+ * Application Reset Status bits.
+ */
+#define ARSR_GPR		(1 << 3)
+#define ARSR_LPMR		(1 << 2)
+#define ARSR_WDT		(1 << 1)
+#define ARSR_HWR		(1 << 0)
+
+/*
+ * Application Subsystem Wake-Up bits.
+ */
+#define ADXER_WRTC		(1 << 31)	/* RTC */
+#define ADXER_WOST		(1 << 30)	/* OS Timer */
+#define ADXER_WTSI		(1 << 29)	/* Touchscreen */
+#define ADXER_WUSBH		(1 << 28)	/* USB host */
+#define ADXER_WUSB2		(1 << 26)	/* USB client 2.0 */
+#define ADXER_WMSL0		(1 << 24)	/* MSL port 0*/
+#define ADXER_WDMUX3		(1 << 23)	/* USB EDMUX3 */
+#define ADXER_WDMUX2		(1 << 22)	/* USB EDMUX2 */
+#define ADXER_WKP		(1 << 21)	/* Keypad */
+#define ADXER_WUSIM1		(1 << 20)	/* USIM Port 1 */
+#define ADXER_WUSIM0		(1 << 19)	/* USIM Port 0 */
+#define ADXER_WOTG		(1 << 16)	/* USBOTG input */
+#define ADXER_MFP_WFLASH	(1 << 15)	/* MFP: Data flash busy */
+#define ADXER_MFP_GEN12		(1 << 14)	/* MFP: MMC3/GPIO/OST inputs */
+#define ADXER_MFP_WMMC2		(1 << 13)	/* MFP: MMC2 */
+#define ADXER_MFP_WMMC1		(1 << 12)	/* MFP: MMC1 */
+#define ADXER_MFP_WI2C		(1 << 11)	/* MFP: I2C */
+#define ADXER_MFP_WSSP4		(1 << 10)	/* MFP: SSP4 */
+#define ADXER_MFP_WSSP3		(1 << 9)	/* MFP: SSP3 */
+#define ADXER_MFP_WMAXTRIX	(1 << 8)	/* MFP: matrix keypad */
+#define ADXER_MFP_WUART3	(1 << 7)	/* MFP: UART3 */
+#define ADXER_MFP_WUART2	(1 << 6)	/* MFP: UART2 */
+#define ADXER_MFP_WUART1	(1 << 5)	/* MFP: UART1 */
+#define ADXER_MFP_WSSP2		(1 << 4)	/* MFP: SSP2 */
+#define ADXER_MFP_WSSP1		(1 << 3)	/* MFP: SSP1 */
+#define ADXER_MFP_WAC97		(1 << 2)	/* MFP: AC97 */
+#define ADXER_WEXTWAKE1		(1 << 1)	/* External Wake 1 */
+#define ADXER_WEXTWAKE0		(1 << 0)	/* External Wake 0 */
+
+/*
+ * AD3R/AD2R/AD1R bits.  R2-R5 are only defined for PXA320.
+ */
+#define ADXR_L2			(1 << 8)
+#define ADXR_R5			(1 << 5)
+#define ADXR_R4			(1 << 4)
+#define ADXR_R3			(1 << 3)
+#define ADXR_R2			(1 << 2)
+#define ADXR_R1			(1 << 1)
+#define ADXR_R0			(1 << 0)
+
+/*
+ * Values for PWRMODE CP15 register
+ */
+#define PXA3xx_PM_S3D4C4	0x07	/* aka deep sleep */
+#define PXA3xx_PM_S2D3C4	0x06	/* aka sleep */
+#define PXA3xx_PM_S0D2C2	0x03	/* aka standby */
+#define PXA3xx_PM_S0D1C2	0x02	/* aka LCD refresh */
+#define PXA3xx_PM_S0D0C1	0x01
+
+/*
+ * Application Subsystem Clock
+ */
+#define ACCR		__REG(0x41340000)	/* Application Subsystem Clock Configuration Register */
+#define ACSR		__REG(0x41340004)	/* Application Subsystem Clock Status Register */
+#define AICSR		__REG(0x41340008)	/* Application Subsystem Interrupt Control/Status Register */
+#define CKENA		__REG(0x4134000C)	/* A Clock Enable Register */
+#define CKENB		__REG(0x41340010)	/* B Clock Enable Register */
+#define AC97_DIV	__REG(0x41340014)	/* AC97 clock divisor value register */
+
+/*
+ * Clock Enable Bit
+ */
+#define CKEN_LCD	1	/* < LCD Clock Enable */
+#define CKEN_USBH	2	/* < USB host clock enable */
+#define CKEN_CAMERA	3	/* < Camera interface clock enable */
+#define CKEN_NAND	4	/* < NAND Flash Controller Clock Enable */
+#define CKEN_USB2	6	/* < USB 2.0 client clock enable. */
+#define CKEN_DMC	8	/* < Dynamic Memory Controller clock enable */
+#define CKEN_SMC	9	/* < Static Memory Controller clock enable */
+#define CKEN_ISC	10	/* < Internal SRAM Controller clock enable */
+#define CKEN_BOOT	11	/* < Boot rom clock enable */
+#define CKEN_MMC1	12	/* < MMC1 Clock enable */
+#define CKEN_MMC2	13	/* < MMC2 clock enable */
+#define CKEN_KEYPAD	14	/* < Keypand Controller Clock Enable */
+#define CKEN_CIR	15	/* < Consumer IR Clock Enable */
+#define CKEN_USIM0	17	/* < USIM[0] Clock Enable */
+#define CKEN_USIM1	18	/* < USIM[1] Clock Enable */
+#define CKEN_TPM	19	/* < TPM clock enable */
+#define CKEN_UDC	20	/* < UDC clock enable */
+#define CKEN_BTUART	21	/* < BTUART clock enable */
+#define CKEN_FFUART	22	/* < FFUART clock enable */
+#define CKEN_STUART	23	/* < STUART clock enable */
+#define CKEN_AC97	24	/* < AC97 clock enable */
+#define CKEN_TOUCH	25	/* < Touch screen Interface Clock Enable */
+#define CKEN_SSP1	26	/* < SSP1 clock enable */
+#define CKEN_SSP2	27	/* < SSP2 clock enable */
+#define CKEN_SSP3	28	/* < SSP3 clock enable */
+#define CKEN_SSP4	29	/* < SSP4 clock enable */
+#define CKEN_MSL0	30	/* < MSL0 clock enable */
+#define CKEN_PWM0	32	/* < PWM[0] clock enable */
+#define CKEN_PWM1	33	/* < PWM[1] clock enable */
+#define CKEN_I2C	36	/* < I2C clock enable */
+#define CKEN_INTC	38	/* < Interrupt controller clock enable */
+#define CKEN_GPIO	39	/* < GPIO clock enable */
+#define CKEN_1WIRE	40	/* < 1-wire clock enable */
+#define CKEN_HSIO2	41	/* < HSIO2 clock enable */
+#define CKEN_MINI_IM	48	/* < Mini-IM */
+#define CKEN_MINI_LCD	49	/* < Mini LCD */
+
+#if defined(CONFIG_CPU_PXA310)
+#define CKEN_MMC3	5	/* < MMC3 Clock Enable */
+#define CKEN_MVED	43	/* < MVED clock enable */
+#endif
+
+/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
+#define PXA300_CKEN_GRAPHICS	42	/* Graphics controller clock enable */
+#define PXA320_CKEN_GRAPHICS	7	/* Graphics controller clock enable */
+
+#endif /* __ASM_ARCH_PXA3XX_REGS_H */
diff --git a/include/asm-arm/arch-pxa/pxa3xx_nand.h b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
similarity index 100%
rename from include/asm-arm/arch-pxa/pxa3xx_nand.h
rename to arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
new file mode 100644
index 0000000..6544754
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -0,0 +1,151 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/pxafb.h
+ *
+ *  Support for the xscale frame buffer.
+ *
+ *  Author:     Jean-Frederic Clere
+ *  Created:    Sep 22, 2003
+ *  Copyright:  jfclere@sinix.net
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/fb.h>
+#include <mach/regs-lcd.h>
+
+/*
+ * Supported LCD connections
+ *
+ * bits 0 - 3: for LCD panel type:
+ *
+ *   STN  - for passive matrix
+ *   DSTN - for dual scan passive matrix
+ *   TFT  - for active matrix
+ *
+ * bits 4 - 9 : for bus width
+ * bits 10-17 : for AC Bias Pin Frequency
+ * bit     18 : for output enable polarity
+ * bit     19 : for pixel clock edge
+ */
+#define LCD_CONN_TYPE(_x)	((_x) & 0x0f)
+#define LCD_CONN_WIDTH(_x)	(((_x) >> 4) & 0x1f)
+
+#define LCD_TYPE_UNKNOWN	0
+#define LCD_TYPE_MONO_STN	1
+#define LCD_TYPE_MONO_DSTN	2
+#define LCD_TYPE_COLOR_STN	3
+#define LCD_TYPE_COLOR_DSTN	4
+#define LCD_TYPE_COLOR_TFT	5
+#define LCD_TYPE_SMART_PANEL	6
+#define LCD_TYPE_MAX		7
+
+#define LCD_MONO_STN_4BPP	((4  << 4) | LCD_TYPE_MONO_STN)
+#define LCD_MONO_STN_8BPP	((8  << 4) | LCD_TYPE_MONO_STN)
+#define LCD_MONO_DSTN_8BPP	((8  << 4) | LCD_TYPE_MONO_DSTN)
+#define LCD_COLOR_STN_8BPP	((8  << 4) | LCD_TYPE_COLOR_STN)
+#define LCD_COLOR_DSTN_16BPP	((16 << 4) | LCD_TYPE_COLOR_DSTN)
+#define LCD_COLOR_TFT_16BPP	((16 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_COLOR_TFT_18BPP	((18 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_SMART_PANEL_8BPP	((8  << 4) | LCD_TYPE_SMART_PANEL)
+#define LCD_SMART_PANEL_16BPP	((16 << 4) | LCD_TYPE_SMART_PANEL)
+#define LCD_SMART_PANEL_18BPP	((18 << 4) | LCD_TYPE_SMART_PANEL)
+
+#define LCD_AC_BIAS_FREQ(x)	(((x) & 0xff) << 10)
+#define LCD_BIAS_ACTIVE_HIGH	(0 << 17)
+#define LCD_BIAS_ACTIVE_LOW	(1 << 17)
+#define LCD_PCLK_EDGE_RISE	(0 << 18)
+#define LCD_PCLK_EDGE_FALL	(1 << 18)
+
+/*
+ * This structure describes the machine which we are running on.
+ * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
+ * of linux/drivers/video/pxafb.c
+ */
+struct pxafb_mode_info {
+	u_long		pixclock;
+
+	u_short		xres;
+	u_short		yres;
+
+	u_char		bpp;
+	u_int		cmap_greyscale:1,
+			depth:8,
+			unused:23;
+
+	/* Parallel Mode Timing */
+	u_char		hsync_len;
+	u_char		left_margin;
+	u_char		right_margin;
+
+	u_char		vsync_len;
+	u_char		upper_margin;
+	u_char		lower_margin;
+	u_char		sync;
+
+	/* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
+	 * Note:
+	 * 1. all parameters in nanosecond (ns)
+	 * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
+	 *    in pxa27x and pxa3xx, initialize them to the same value or
+	 *    the larger one will be used
+	 * 3. same to {rd,wr}_pulse_width
+	 */
+	unsigned	a0csrd_set_hld;	/* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
+	unsigned	a0cswr_set_hld;	/* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
+	unsigned	wr_pulse_width;	/* L_PCLK_WR pulse width */
+	unsigned	rd_pulse_width;	/* L_FCLK_RD pulse width */
+	unsigned	cmd_inh_time;	/* Command Inhibit time between two writes */
+	unsigned	op_hold_time;	/* Output Hold time from L_FCLK_RD negation */
+};
+
+struct pxafb_mach_info {
+	struct pxafb_mode_info *modes;
+	unsigned int num_modes;
+
+	unsigned int	lcd_conn;
+
+	u_int		fixed_modes:1,
+			cmap_inverse:1,
+			cmap_static:1,
+			unused:29;
+
+	/* The following should be defined in LCCR0
+	 *      LCCR0_Act or LCCR0_Pas          Active or Passive
+	 *      LCCR0_Sngl or LCCR0_Dual        Single/Dual panel
+	 *      LCCR0_Mono or LCCR0_Color       Mono/Color
+	 *      LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
+	 *      LCCR0_DMADel(Tcpu) (optional)   DMA request delay
+	 *
+	 * The following should not be defined in LCCR0:
+	 *      LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
+	 *      LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
+	 */
+	u_int		lccr0;
+	/* The following should be defined in LCCR3
+	 *      LCCR3_OutEnH or LCCR3_OutEnL    Output enable polarity
+	 *      LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
+	 *      LCCR3_Acb(X)                    AB Bias pin frequency
+	 *      LCCR3_DPC (optional)            Double Pixel Clock mode (untested)
+	 *
+	 * The following should not be defined in LCCR3
+	 *      LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
+	 */
+	u_int		lccr3;
+	/* The following should be defined in LCCR4
+	 *	LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2
+	 *
+	 * All other bits in LCCR4 should be left alone.
+	 */
+	u_int		lccr4;
+	void (*pxafb_backlight_power)(int);
+	void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
+	void (*smart_update)(struct fb_info *);
+};
+void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
+void set_pxa_fb_parent(struct device *parent_dev);
+unsigned long pxafb_get_hsync_time(struct device *dev);
+
+extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
+extern int pxafb_smart_flush(struct fb_info *info);
diff --git a/arch/arm/mach-pxa/include/mach/regs-lcd.h b/arch/arm/mach-pxa/include/mach/regs-lcd.h
new file mode 100644
index 0000000..c689c4e
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-lcd.h
@@ -0,0 +1,180 @@
+#ifndef __ASM_ARCH_REGS_LCD_H
+#define __ASM_ARCH_REGS_LCD_H
+
+#include <mach/bitfield.h>
+
+/*
+ * LCD Controller Registers and Bits Definitions
+ */
+#define LCCR0		(0x000)	/* LCD Controller Control Register 0 */
+#define LCCR1		(0x004)	/* LCD Controller Control Register 1 */
+#define LCCR2		(0x008)	/* LCD Controller Control Register 2 */
+#define LCCR3		(0x00C)	/* LCD Controller Control Register 3 */
+#define LCCR4		(0x010)	/* LCD Controller Control Register 4 */
+#define LCCR5		(0x014)	/* LCD Controller Control Register 5 */
+#define DFBR0		(0x020)	/* DMA Channel 0 Frame Branch Register */
+#define DFBR1		(0x024)	/* DMA Channel 1 Frame Branch Register */
+#define LCSR		(0x038)	/* LCD Controller Status Register */
+#define LIIDR		(0x03C)	/* LCD Controller Interrupt ID Register */
+#define TMEDRGBR	(0x040)	/* TMED RGB Seed Register */
+#define TMEDCR		(0x044)	/* TMED Control Register */
+
+#define CMDCR		(0x100)	/* Command Control Register */
+#define PRSR		(0x104)	/* Panel Read Status Register */
+
+#define LCCR3_1BPP	(0 << 24)
+#define LCCR3_2BPP	(1 << 24)
+#define LCCR3_4BPP	(2 << 24)
+#define LCCR3_8BPP	(3 << 24)
+#define LCCR3_16BPP	(4 << 24)
+#define LCCR3_18BPP	(5 << 24)
+#define LCCR3_18BPP_P	(6 << 24)
+#define LCCR3_19BPP	(7 << 24)
+#define LCCR3_19BPP_P	(1 << 29)
+#define LCCR3_24BPP	((1 << 29) | (1 << 24))
+#define LCCR3_25BPP	((1 << 29) | (2 << 24))
+
+#define LCCR3_PDFOR_0	(0 << 30)
+#define LCCR3_PDFOR_1	(1 << 30)
+#define LCCR3_PDFOR_2	(2 << 30)
+#define LCCR3_PDFOR_3	(3 << 30)
+
+#define LCCR4_PAL_FOR_0	(0 << 15)
+#define LCCR4_PAL_FOR_1	(1 << 15)
+#define LCCR4_PAL_FOR_2	(2 << 15)
+#define LCCR4_PAL_FOR_MASK	(3 << 15)
+
+#define FDADR0		(0x200)	/* DMA Channel 0 Frame Descriptor Address Register */
+#define FSADR0		(0x204)	/* DMA Channel 0 Frame Source Address Register */
+#define FIDR0		(0x208)	/* DMA Channel 0 Frame ID Register */
+#define LDCMD0		(0x20C)	/* DMA Channel 0 Command Register */
+#define FDADR1		(0x210)	/* DMA Channel 1 Frame Descriptor Address Register */
+#define FSADR1		(0x214)	/* DMA Channel 1 Frame Source Address Register */
+#define FIDR1		(0x218)	/* DMA Channel 1 Frame ID Register */
+#define LDCMD1		(0x21C)	/* DMA Channel 1 Command Register */
+#define FDADR6		(0x260) /* DMA Channel 6 Frame Descriptor Address Register */
+#define FSADR6		(0x264) /* DMA Channel 6 Frame Source Address Register */
+#define FIDR6		(0x268) /* DMA Channel 6 Frame ID Register */
+
+#define LCCR0_ENB	(1 << 0)	/* LCD Controller enable */
+#define LCCR0_CMS	(1 << 1)	/* Color/Monochrome Display Select */
+#define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display */
+#define LCCR0_Mono	(LCCR0_CMS*1)	/*  Monochrome display */
+#define LCCR0_SDS	(1 << 2)	/* Single/Dual Panel Display Select */
+#define LCCR0_Sngl	(LCCR0_SDS*0)	/*  Single panel display */
+#define LCCR0_Dual	(LCCR0_SDS*1)	/*  Dual panel display */
+
+#define LCCR0_LDM	(1 << 3)	/* LCD Disable Done Mask */
+#define LCCR0_SFM	(1 << 4)	/* Start of frame mask */
+#define LCCR0_IUM	(1 << 5)	/* Input FIFO underrun mask */
+#define LCCR0_EFM	(1 << 6)	/* End of Frame mask */
+#define LCCR0_PAS	(1 << 7)	/* Passive/Active display Select */
+#define LCCR0_Pas	(LCCR0_PAS*0)	/*  Passive display (STN) */
+#define LCCR0_Act	(LCCR0_PAS*1)	/*  Active display (TFT) */
+#define LCCR0_DPD	(1 << 9)	/* Double Pixel Data (monochrome) */
+#define LCCR0_4PixMono	(LCCR0_DPD*0)	/*  4-Pixel/clock Monochrome display */
+#define LCCR0_8PixMono	(LCCR0_DPD*1)	/*  8-Pixel/clock Monochrome display */
+#define LCCR0_DIS	(1 << 10)	/* LCD Disable */
+#define LCCR0_QDM	(1 << 11)	/* LCD Quick Disable mask */
+#define LCCR0_PDD	(0xff << 12)	/* Palette DMA request delay */
+#define LCCR0_PDD_S	12
+#define LCCR0_BM	(1 << 20)	/* Branch mask */
+#define LCCR0_OUM	(1 << 21)	/* Output FIFO underrun mask */
+#define LCCR0_LCDT	(1 << 22)	/* LCD panel type */
+#define LCCR0_RDSTM	(1 << 23)	/* Read status interrupt mask */
+#define LCCR0_CMDIM	(1 << 24)	/* Command interrupt mask */
+#define LCCR0_OUC	(1 << 25)	/* Overlay Underlay control bit */
+#define LCCR0_LDDALT	(1 << 26)	/* LDD alternate mapping control */
+
+#define LCCR1_PPL	Fld (10, 0)	/* Pixels Per Line - 1 */
+#define LCCR1_DisWdth(Pixel)	(((Pixel) - 1) << FShft (LCCR1_PPL))
+
+#define LCCR1_HSW	Fld (6, 10)	/* Horizontal Synchronization */
+#define LCCR1_HorSnchWdth(Tpix)	(((Tpix) - 1) << FShft (LCCR1_HSW))
+
+#define LCCR1_ELW	Fld (8, 16)	/* End-of-Line pixel clock Wait - 1 */
+#define LCCR1_EndLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_ELW))
+
+#define LCCR1_BLW	Fld (8, 24)	/* Beginning-of-Line pixel clock */
+#define LCCR1_BegLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_BLW))
+
+#define LCCR2_LPP	Fld (10, 0)	/* Line Per Panel - 1 */
+#define LCCR2_DisHght(Line)	(((Line) - 1) << FShft (LCCR2_LPP))
+
+#define LCCR2_VSW	Fld (6, 10)	/* Vertical Synchronization pulse - 1 */
+#define LCCR2_VrtSnchWdth(Tln)	(((Tln) - 1) << FShft (LCCR2_VSW))
+
+#define LCCR2_EFW	Fld (8, 16)	/* End-of-Frame line clock Wait */
+#define LCCR2_EndFrmDel(Tln)	((Tln) << FShft (LCCR2_EFW))
+
+#define LCCR2_BFW	Fld (8, 24)	/* Beginning-of-Frame line clock */
+#define LCCR2_BegFrmDel(Tln)	((Tln) << FShft (LCCR2_BFW))
+
+#define LCCR3_API	(0xf << 16)	/* AC Bias pin trasitions per interrupt */
+#define LCCR3_API_S	16
+#define LCCR3_VSP	(1 << 20)	/* vertical sync polarity */
+#define LCCR3_HSP	(1 << 21)	/* horizontal sync polarity */
+#define LCCR3_PCP	(1 << 22)	/* Pixel Clock Polarity (L_PCLK) */
+#define LCCR3_PixRsEdg	(LCCR3_PCP*0)	/*  Pixel clock Rising-Edge */
+#define LCCR3_PixFlEdg	(LCCR3_PCP*1)	/*  Pixel clock Falling-Edge */
+
+#define LCCR3_OEP	(1 << 23)	/* Output Enable Polarity */
+#define LCCR3_OutEnH	(LCCR3_OEP*0)	/*  Output Enable active High */
+#define LCCR3_OutEnL	(LCCR3_OEP*1)	/*  Output Enable active Low */
+
+#define LCCR3_DPC	(1 << 27)	/* double pixel clock mode */
+#define LCCR3_PCD	Fld (8, 0)	/* Pixel Clock Divisor */
+#define LCCR3_PixClkDiv(Div)	(((Div) << FShft (LCCR3_PCD)))
+
+#define LCCR3_BPP	Fld (3, 24)	/* Bit Per Pixel */
+#define LCCR3_Bpp(Bpp)	(((Bpp) << FShft (LCCR3_BPP)))
+
+#define LCCR3_ACB	Fld (8, 8)	/* AC Bias */
+#define LCCR3_Acb(Acb)	(((Acb) << FShft (LCCR3_ACB)))
+
+#define LCCR3_HorSnchH	(LCCR3_HSP*0)	/*  HSP Active High */
+#define LCCR3_HorSnchL	(LCCR3_HSP*1)	/*  HSP Active Low */
+
+#define LCCR3_VrtSnchH	(LCCR3_VSP*0)	/*  VSP Active High */
+#define LCCR3_VrtSnchL	(LCCR3_VSP*1)	/*  VSP Active Low */
+
+#define LCCR5_IUM(x)	(1 << ((x) + 23)) /* input underrun mask */
+#define LCCR5_BSM(x)	(1 << ((x) + 15)) /* branch mask */
+#define LCCR5_EOFM(x)	(1 << ((x) + 7))  /* end of frame mask */
+#define LCCR5_SOFM(x)	(1 << ((x) + 0))  /* start of frame mask */
+
+#define LCSR_LDD	(1 << 0)	/* LCD Disable Done */
+#define LCSR_SOF	(1 << 1)	/* Start of frame */
+#define LCSR_BER	(1 << 2)	/* Bus error */
+#define LCSR_ABC	(1 << 3)	/* AC Bias count */
+#define LCSR_IUL	(1 << 4)	/* input FIFO underrun Lower panel */
+#define LCSR_IUU	(1 << 5)	/* input FIFO underrun Upper panel */
+#define LCSR_OU		(1 << 6)	/* output FIFO underrun */
+#define LCSR_QD		(1 << 7)	/* quick disable */
+#define LCSR_EOF	(1 << 8)	/* end of frame */
+#define LCSR_BS		(1 << 9)	/* branch status */
+#define LCSR_SINT	(1 << 10)	/* subsequent interrupt */
+#define LCSR_RD_ST	(1 << 11)	/* read status */
+#define LCSR_CMD_INT	(1 << 12)	/* command interrupt */
+
+#define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
+
+/* smartpanel related */
+#define PRSR_DATA(x)	((x) & 0xff)	/* Panel Data */
+#define PRSR_A0		(1 << 8)	/* Read Data Source */
+#define PRSR_ST_OK	(1 << 9)	/* Status OK */
+#define PRSR_CON_NT	(1 << 10)	/* Continue to Next Command */
+
+#define SMART_CMD_A0			 (0x1 << 8)
+#define SMART_CMD_READ_STATUS_REG	 (0x0 << 9)
+#define SMART_CMD_READ_FRAME_BUFFER	((0x0 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_COMMAND		 (0x1 << 9)
+#define SMART_CMD_WRITE_DATA		((0x1 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_FRAME		((0x2 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WAIT_FOR_VSYNC	 (0x3 << 9)
+#define SMART_CMD_NOOP			 (0x4 << 9)
+#define SMART_CMD_INTERRUPT		 (0x5 << 9)
+
+#define SMART_CMD(x)	(SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
+#define SMART_DAT(x)	(SMART_CMD_WRITE_DATA | ((x) & 0xff))
+#endif /* __ASM_ARCH_REGS_LCD_H */
diff --git a/include/asm-arm/arch-pxa/regs-ssp.h b/arch/arm/mach-pxa/include/mach/regs-ssp.h
similarity index 100%
rename from include/asm-arm/arch-pxa/regs-ssp.h
rename to arch/arm/mach-pxa/include/mach/regs-ssp.h
diff --git a/include/asm-arm/arch-pxa/sharpsl.h b/arch/arm/mach-pxa/include/mach/sharpsl.h
similarity index 100%
rename from include/asm-arm/arch-pxa/sharpsl.h
rename to arch/arm/mach-pxa/include/mach/sharpsl.h
diff --git a/include/asm-arm/arch-pxa/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
similarity index 100%
rename from include/asm-arm/arch-pxa/spitz.h
rename to arch/arm/mach-pxa/include/mach/spitz.h
diff --git a/include/asm-arm/arch-pxa/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h
similarity index 100%
rename from include/asm-arm/arch-pxa/ssp.h
rename to arch/arm/mach-pxa/include/mach/ssp.h
diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h
new file mode 100644
index 0000000..0f381e6
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/system.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-pxa/include/mach/system.h
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Jun 15, 2001
+ * Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/proc-fns.h>
+#include "hardware.h"
+#include "pxa2xx-regs.h"
+#include "pxa-regs.h"
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+
+void arch_reset(char mode);
diff --git a/arch/arm/mach-pxa/include/mach/timex.h b/arch/arm/mach-pxa/include/mach/timex.h
new file mode 100644
index 0000000..b05fc66
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/timex.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-pxa/include/mach/timex.h
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Jun 15, 2001
+ * Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#if defined(CONFIG_PXA25x)
+/* PXA250/210 timer base */
+#define CLOCK_TICK_RATE 3686400
+#elif defined(CONFIG_PXA27x)
+/* PXA27x timer base */
+#ifdef CONFIG_MACH_MAINSTONE
+#define CLOCK_TICK_RATE 3249600
+#else
+#define CLOCK_TICK_RATE 3250000
+#endif
+#else
+#define CLOCK_TICK_RATE 3250000
+#endif
diff --git a/include/asm-arm/arch-pxa/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
similarity index 100%
rename from include/asm-arm/arch-pxa/tosa.h
rename to arch/arm/mach-pxa/include/mach/tosa.h
diff --git a/include/asm-arm/arch-pxa/tosa_bt.h b/arch/arm/mach-pxa/include/mach/tosa_bt.h
similarity index 100%
rename from include/asm-arm/arch-pxa/tosa_bt.h
rename to arch/arm/mach-pxa/include/mach/tosa_bt.h
diff --git a/include/asm-arm/arch-pxa/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h
similarity index 100%
rename from include/asm-arm/arch-pxa/trizeps4.h
rename to arch/arm/mach-pxa/include/mach/trizeps4.h
diff --git a/arch/arm/mach-pxa/include/mach/udc.h b/arch/arm/mach-pxa/include/mach/udc.h
new file mode 100644
index 0000000..2f82332
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/udc.h
@@ -0,0 +1,8 @@
+/*
+ * arch/arm/mach-pxa/include/mach/udc.h
+ *
+ */
+#include <asm/mach/udc_pxa2xx.h>
+
+extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info);
+
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
new file mode 100644
index 0000000..21e3e89
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -0,0 +1,45 @@
+/*
+ * arch/arm/mach-pxa/include/mach/uncompress.h
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/pxa-regs.h>
+#include <asm/mach-types.h>
+
+#define __REG(x)       ((volatile unsigned long *)x)
+
+static volatile unsigned long *UART = FFUART;
+
+static inline void putc(char c)
+{
+	if (!(UART[UART_IER] & IER_UUE))
+		return;
+	while (!(UART[UART_LSR] & LSR_TDRQ))
+		barrier();
+	UART[UART_TX] = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void flush(void)
+{
+}
+
+static inline void arch_decomp_setup(void)
+{
+	if (machine_is_littleton())
+		UART = STUART;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-pxa/include/mach/vmalloc.h b/arch/arm/mach-pxa/include/mach/vmalloc.h
new file mode 100644
index 0000000..e90c5ee
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/vmalloc.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/mach-pxa/include/mach/vmalloc.h
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VMALLOC_END       (0xe8000000)
diff --git a/include/asm-arm/arch-pxa/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h
similarity index 100%
rename from include/asm-arm/arch-pxa/zylonite.h
rename to arch/arm/mach-pxa/include/mach/zylonite.h
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 26a9d8b..5e95c53 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -17,10 +17,10 @@
 #include <linux/interrupt.h>
 #include <linux/sysdev.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c
index c410e53..18b20d4 100644
--- a/arch/arm/mach-pxa/leds-idp.c
+++ b/arch/arm/mach-pxa/leds-idp.c
@@ -14,12 +14,12 @@
 
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/idp.h>
+#include <mach/pxa-regs.h>
+#include <mach/idp.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c
index 7eafbb4..1a25802 100644
--- a/arch/arm/mach-pxa/leds-lubbock.c
+++ b/arch/arm/mach-pxa/leds-lubbock.c
@@ -13,11 +13,11 @@
 
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/lubbock.h>
+#include <mach/pxa-regs.h>
+#include <mach/lubbock.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c
index 32ca5ac..95e06b8 100644
--- a/arch/arm/mach-pxa/leds-mainstone.c
+++ b/arch/arm/mach-pxa/leds-mainstone.c
@@ -12,12 +12,12 @@
 
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mainstone.h>
+#include <mach/pxa-regs.h>
+#include <mach/mainstone.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/leds-trizeps4.c b/arch/arm/mach-pxa/leds-trizeps4.c
index c2fe1db..3bc2900 100644
--- a/arch/arm/mach-pxa/leds-trizeps4.c
+++ b/arch/arm/mach-pxa/leds-trizeps4.c
@@ -12,14 +12,14 @@
 
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/types.h>
 #include <asm/leds.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/trizeps4.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/trizeps4.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 101bd7e..58f3402 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -26,21 +26,21 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mfp-pxa300.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/pxa3xx_nand.h>
-#include <asm/arch/littleton.h>
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/gpio.h>
+#include <mach/pxafb.h>
+#include <mach/ssp.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa3xx_nand.h>
+#include <mach/littleton.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 34c69b1..b703894 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -29,7 +29,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -38,15 +38,15 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/lpd270.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/lpd270.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 66a3f33..4ba8d31 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -25,12 +25,12 @@
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
-#include <asm/arch/pxa2xx_spi.h>
+#include <mach/pxa2xx_spi.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -41,15 +41,15 @@
 
 #include <asm/hardware/sa1111.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/lubbock.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/audio.h>
+#include <mach/lubbock.h>
+#include <mach/udc.h>
+#include <mach/irda.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index e919f37..143f28a 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -26,18 +26,18 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/magician.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/magician.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxafb.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 425ba96..d44af76 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -32,7 +32,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -41,17 +41,17 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/mainstone.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pxa27x_keypad.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/mainstone.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x_keypad.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index fd4545e..925575f1 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -18,10 +18,10 @@
 #include <linux/init.h>
 #include <linux/sysdev.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa2xx.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa2xx.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c
index c151831..eb197a6 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.c
@@ -19,10 +19,10 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa3xx.h>
-#include <asm/arch/pxa3xx-regs.h>
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+#include <mach/pxa3xx-regs.h>
 
 /* mfp_spin_lock is used to ensure that MFP register configuration
  * (most likely a read-modify-write operation) is atomic, and that
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 408657a..fe924a2 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -30,15 +30,15 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/audio.h>
-#include <asm/arch/palmtx.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/udc.h>
+#include <mach/audio.h>
+#include <mach/palmtx.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 377f3be8..730b9f6 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -29,12 +29,12 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx_spi.h>
-#include <asm/arch/pcm027.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/pcm027.h>
 #include "generic.h"
 
 /*
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 90056d5..420c9b3 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -28,16 +28,16 @@
 #include <media/soc_camera.h>
 
 #include <asm/gpio.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/camera.h>
+#include <mach/i2c.h>
+#include <mach/camera.h>
 #include <asm/mach/map.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pcm990_baseboard.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pcm990_baseboard.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa27x.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 9445bf1..1b539e6 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -16,12 +16,12 @@
 #include <linux/errno.h>
 #include <linux/time.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/memory.h>
 #include <asm/system.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/lubbock.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/lubbock.h>
 #include <asm/mach/time.h>
 
 struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index fef958f..055ec63 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -21,7 +21,7 @@
 #include <linux/pm.h>
 #include <linux/delay.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
@@ -31,16 +31,16 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/poodle.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/irda.h>
+#include <mach/poodle.h>
+#include <mach/pxafb.h>
+#include <mach/sharpsl.h>
+#include <mach/ssp.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/hardware/locomo.h>
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c
index ce28cd9..316cd986 100644
--- a/arch/arm/mach-pxa/pwm.c
+++ b/arch/arm/mach-pxa/pwm.c
@@ -20,7 +20,7 @@
 #include <linux/pwm.h>
 
 #include <asm/div64.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 /* PWM registers and bits definitions */
 #define PWMCR		(0x00)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index c8379e5..3c2d22d 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -23,13 +23,13 @@
 #include <linux/suspend.h>
 #include <linux/sysdev.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 46720ed..6bec434 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -18,16 +18,16 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/i2c.h>
+#include <mach/irqs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/ohci.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
+#include <mach/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index d4f6415..00b4de6 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -14,9 +14,9 @@
 #include <linux/kernel.h>
 #include <linux/device.h>
 
-#include <asm/arch/mfp-pxa2xx.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/irda.h>
+#include <mach/mfp-pxa2xx.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/irda.h>
 
 static unsigned long pxa2xx_mfp_fir[] = {
 	GPIO46_FICP_RXD,
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index b8482da..494fc1f 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -17,9 +17,9 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/mfp-pxa300.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa300.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 95d46d9..016eb18 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -17,10 +17,10 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/mfp.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/mfp-pxa320.h>
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa320.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 4f5e6c7..37b0721 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -22,12 +22,12 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/ssp.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/ohci.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
+#include <mach/ssp.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index 028ee1d..13e6bfd 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -16,8 +16,8 @@
 #include <linux/irq.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/mfp-pxa930.h>
+#include <mach/hardware.h>
+#include <mach/mfp-pxa930.h>
 
 static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
 
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index 9d39dea..fabead7 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -10,8 +10,8 @@
 #include <asm/io.h>
 #include <asm/proc-fns.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 static void do_hw_reset(void);
 
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index ee70dee..e7ea91c 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -21,9 +21,9 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/mfp-pxa930.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa930.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 7b7d0bd..e804ae0 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -22,12 +22,12 @@
 #include <linux/platform_device.h>
 #include <linux/apm-emulation.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
 #include "sharpsl.h"
 
 struct battery_thresh spitz_battery_levels_acin[] = {
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 2a58f1e..a62c837 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -13,10 +13,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 #define MDREFR_KDIV	0x200a4000	// all banks
 #define CCCR_SLEEP	0x00000107	// L=7 2N=2 A=0 PPDIS=0 CPDIS=0
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index a8774d4..26b9fa5 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -26,7 +26,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/system.h>
@@ -35,18 +35,18 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/pxa27x-udc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/akita.h>
-#include <asm/arch/spitz.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/irda.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/udc.h>
+#include <mach/pxafb.h>
+#include <mach/akita.h>
+#include <mach/spitz.h>
+#include <mach/sharpsl.h>
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 8fb5651..8a40505 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -20,14 +20,14 @@
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/scoop.h>
 
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/spitz.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
+#include <mach/spitz.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
 #include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index bca34e5..9bd93c5 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -31,10 +31,10 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/regs-ssp.h>
+#include <mach/hardware.h>
+#include <mach/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/regs-ssp.h>
 
 #define TIMEOUT 100000
 
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index 207fb60..f3821cf 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -11,10 +11,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 		.text
 
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 9dcb349e..589d32b 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -21,9 +21,9 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/mfp-pxa930.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa930.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 7b7c0179..67e1850 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -22,7 +22,7 @@
 #include <asm/cnt32_to_63.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 #include <asm/mach-types.h>
 
 /*
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
index 7d85054..fb0294b 100644
--- a/arch/arm/mach-pxa/tosa-bt.c
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -16,7 +16,7 @@
 #include <linux/delay.h>
 #include <linux/rfkill.h>
 
-#include <asm/arch/tosa_bt.h>
+#include <mach/tosa_bt.h>
 
 static void tosa_bt_on(struct tosa_bt_data *data)
 {
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index fea17ce..38bc59c 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -34,16 +34,16 @@
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/tosa_bt.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/irda.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/tosa_bt.h>
 
 #include <asm/mach/arch.h>
-#include <asm/arch/tosa.h>
+#include <mach/tosa.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 6367ac2..3ed757e 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -31,7 +31,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -40,15 +40,15 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/trizeps4.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/trizeps4.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index f11ced1..0cb65b5 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -23,14 +23,14 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/zylonite.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/pxa3xx_nand.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
+#include <mach/gpio.h>
+#include <mach/pxafb.h>
+#include <mach/zylonite.h>
+#include <mach/mmc.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index b28d46e..095f5c6 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -20,9 +20,9 @@
 #include <linux/i2c/pca953x.h>
 
 #include <asm/gpio.h>
-#include <asm/arch/mfp-pxa300.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/zylonite.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/i2c.h>
+#include <mach/zylonite.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 2b7fba7..9879d7d 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -17,9 +17,9 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mfp-pxa320.h>
-#include <asm/arch/zylonite.h>
+#include <mach/gpio.h>
+#include <mach/mfp-pxa320.h>
+#include <mach/zylonite.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index b63fa88..4f9c84a 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -29,7 +29,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h
new file mode 100644
index 0000000..8d699fd
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-eb.h
@@ -0,0 +1,191 @@
+/*
+ * arch/arm/mach-realview/include/mach/board-eb.h
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_BOARD_EB_H
+#define __ASM_ARCH_BOARD_EB_H
+
+#include <mach/platform.h>
+
+/*
+ * RealView EB + ARM11MPCore peripheral addresses
+ */
+#define REALVIEW_EB_UART0_BASE		0x10009000	/* UART 0 */
+#define REALVIEW_EB_UART1_BASE		0x1000A000	/* UART 1 */
+#define REALVIEW_EB_UART2_BASE		0x1000B000	/* UART 2 */
+#define REALVIEW_EB_UART3_BASE		0x1000C000	/* UART 3 */
+#define REALVIEW_EB_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
+#define REALVIEW_EB_WATCHDOG_BASE	0x10010000	/* watchdog interface */
+#define REALVIEW_EB_TIMER0_1_BASE	0x10011000	/* Timer 0 and 1 */
+#define REALVIEW_EB_TIMER2_3_BASE	0x10012000	/* Timer 2 and 3 */
+#define REALVIEW_EB_GPIO0_BASE		0x10013000	/* GPIO port 0 */
+#define REALVIEW_EB_RTC_BASE		0x10017000	/* Real Time Clock */
+#define REALVIEW_EB_CLCD_BASE		0x10020000	/* CLCD */
+#define REALVIEW_EB_GIC_CPU_BASE	0x10040000	/* Generic interrupt controller CPU interface */
+#define REALVIEW_EB_GIC_DIST_BASE	0x10041000	/* Generic interrupt controller distributor */
+#define REALVIEW_EB_SMC_BASE		0x10080000	/* Static memory controller */
+
+#define REALVIEW_EB_FLASH_BASE		0x40000000
+#define REALVIEW_EB_FLASH_SIZE		SZ_64M
+#define REALVIEW_EB_ETH_BASE		0x4E000000	/* Ethernet */
+#define REALVIEW_EB_USB_BASE		0x4F000000	/* USB */
+
+#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
+#define REALVIEW_EB11MP_SCU_BASE	0x10100000	/* SCU registers */
+#define REALVIEW_EB11MP_GIC_CPU_BASE	0x10100100	/* Generic interrupt controller CPU interface */
+#define REALVIEW_EB11MP_TWD_BASE	0x10100700
+#define REALVIEW_EB11MP_TWD_SIZE	0x00000100
+#define REALVIEW_EB11MP_GIC_DIST_BASE	0x10101000	/* Generic interrupt controller distributor */
+#define REALVIEW_EB11MP_L220_BASE	0x10102000	/* L220 registers */
+#define REALVIEW_EB11MP_SYS_PLD_CTRL1	0xD8		/* Register offset for MPCore sysctl */
+#else
+#define REALVIEW_EB11MP_SCU_BASE	0x1F000000	/* SCU registers */
+#define REALVIEW_EB11MP_GIC_CPU_BASE	0x1F000100	/* Generic interrupt controller CPU interface */
+#define REALVIEW_EB11MP_TWD_BASE	0x1F000700
+#define REALVIEW_EB11MP_TWD_SIZE	0x00000100
+#define REALVIEW_EB11MP_GIC_DIST_BASE	0x1F001000	/* Generic interrupt controller distributor */
+#define REALVIEW_EB11MP_L220_BASE	0x1F002000	/* L220 registers */
+#define REALVIEW_EB11MP_SYS_PLD_CTRL1	0x74		/* Register offset for MPCore sysctl */
+#endif
+
+#define IRQ_EB_GIC_START	32
+
+/*
+ * RealView EB interrupt sources
+ */
+#define IRQ_EB_WDOG		(IRQ_EB_GIC_START + 0)		/* Watchdog timer */
+#define IRQ_EB_SOFT		(IRQ_EB_GIC_START + 1)		/* Software interrupt */
+#define IRQ_EB_COMMRx		(IRQ_EB_GIC_START + 2)		/* Debug Comm Rx interrupt */
+#define IRQ_EB_COMMTx		(IRQ_EB_GIC_START + 3)		/* Debug Comm Tx interrupt */
+#define IRQ_EB_TIMER0_1		(IRQ_EB_GIC_START + 4)		/* Timer 0 and 1 */
+#define IRQ_EB_TIMER2_3		(IRQ_EB_GIC_START + 5)		/* Timer 2 and 3 */
+#define IRQ_EB_GPIO0		(IRQ_EB_GIC_START + 6)		/* GPIO 0 */
+#define IRQ_EB_GPIO1		(IRQ_EB_GIC_START + 7)		/* GPIO 1 */
+#define IRQ_EB_GPIO2		(IRQ_EB_GIC_START + 8)		/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_EB_RTC		(IRQ_EB_GIC_START + 10)		/* Real Time Clock */
+#define IRQ_EB_SSP		(IRQ_EB_GIC_START + 11)		/* Synchronous Serial Port */
+#define IRQ_EB_UART0		(IRQ_EB_GIC_START + 12)		/* UART 0 on development chip */
+#define IRQ_EB_UART1		(IRQ_EB_GIC_START + 13)		/* UART 1 on development chip */
+#define IRQ_EB_UART2		(IRQ_EB_GIC_START + 14)		/* UART 2 on development chip */
+#define IRQ_EB_UART3		(IRQ_EB_GIC_START + 15)		/* UART 3 on development chip */
+#define IRQ_EB_SCI		(IRQ_EB_GIC_START + 16)		/* Smart Card Interface */
+#define IRQ_EB_MMCI0A		(IRQ_EB_GIC_START + 17)		/* Multimedia Card 0A */
+#define IRQ_EB_MMCI0B		(IRQ_EB_GIC_START + 18)		/* Multimedia Card 0B */
+#define IRQ_EB_AACI		(IRQ_EB_GIC_START + 19)		/* Audio Codec */
+#define IRQ_EB_KMI0		(IRQ_EB_GIC_START + 20)		/* Keyboard/Mouse port 0 */
+#define IRQ_EB_KMI1		(IRQ_EB_GIC_START + 21)		/* Keyboard/Mouse port 1 */
+#define IRQ_EB_CHARLCD		(IRQ_EB_GIC_START + 22)		/* Character LCD */
+#define IRQ_EB_CLCD		(IRQ_EB_GIC_START + 23)		/* CLCD controller */
+#define IRQ_EB_DMA		(IRQ_EB_GIC_START + 24)		/* DMA controller */
+#define IRQ_EB_PWRFAIL		(IRQ_EB_GIC_START + 25)		/* Power failure */
+#define IRQ_EB_PISMO		(IRQ_EB_GIC_START + 26)		/* PISMO interface */
+#define IRQ_EB_DoC		(IRQ_EB_GIC_START + 27)		/* Disk on Chip memory controller */
+#define IRQ_EB_ETH		(IRQ_EB_GIC_START + 28)		/* Ethernet controller */
+#define IRQ_EB_USB		(IRQ_EB_GIC_START + 29)		/* USB controller */
+#define IRQ_EB_TSPEN		(IRQ_EB_GIC_START + 30)		/* Touchscreen pen */
+#define IRQ_EB_TSKPAD		(IRQ_EB_GIC_START + 31)		/* Touchscreen keypad */
+
+/*
+ * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
+ */
+#define IRQ_EB11MP_AACI		(IRQ_EB_GIC_START + 0)
+#define IRQ_EB11MP_TIMER0_1	(IRQ_EB_GIC_START + 1)
+#define IRQ_EB11MP_TIMER2_3	(IRQ_EB_GIC_START + 2)
+#define IRQ_EB11MP_USB		(IRQ_EB_GIC_START + 3)
+#define IRQ_EB11MP_UART0	(IRQ_EB_GIC_START + 4)
+#define IRQ_EB11MP_UART1	(IRQ_EB_GIC_START + 5)
+#define IRQ_EB11MP_RTC		(IRQ_EB_GIC_START + 6)
+#define IRQ_EB11MP_KMI0		(IRQ_EB_GIC_START + 7)
+#define IRQ_EB11MP_KMI1		(IRQ_EB_GIC_START + 8)
+#define IRQ_EB11MP_ETH		(IRQ_EB_GIC_START + 9)
+#define IRQ_EB11MP_EB_IRQ1	(IRQ_EB_GIC_START + 10)		/* main GIC */
+#define IRQ_EB11MP_EB_IRQ2	(IRQ_EB_GIC_START + 11)		/* tile GIC */
+#define IRQ_EB11MP_EB_FIQ1	(IRQ_EB_GIC_START + 12)		/* main GIC */
+#define IRQ_EB11MP_EB_FIQ2	(IRQ_EB_GIC_START + 13)		/* tile GIC */
+#define IRQ_EB11MP_MMCI0A	(IRQ_EB_GIC_START + 14)
+#define IRQ_EB11MP_MMCI0B	(IRQ_EB_GIC_START + 15)
+
+#define IRQ_EB11MP_PMU_CPU0	(IRQ_EB_GIC_START + 17)
+#define IRQ_EB11MP_PMU_CPU1	(IRQ_EB_GIC_START + 18)
+#define IRQ_EB11MP_PMU_CPU2	(IRQ_EB_GIC_START + 19)
+#define IRQ_EB11MP_PMU_CPU3	(IRQ_EB_GIC_START + 20)
+#define IRQ_EB11MP_PMU_SCU0	(IRQ_EB_GIC_START + 21)
+#define IRQ_EB11MP_PMU_SCU1	(IRQ_EB_GIC_START + 22)
+#define IRQ_EB11MP_PMU_SCU2	(IRQ_EB_GIC_START + 23)
+#define IRQ_EB11MP_PMU_SCU3	(IRQ_EB_GIC_START + 24)
+#define IRQ_EB11MP_PMU_SCU4	(IRQ_EB_GIC_START + 25)
+#define IRQ_EB11MP_PMU_SCU5	(IRQ_EB_GIC_START + 26)
+#define IRQ_EB11MP_PMU_SCU6	(IRQ_EB_GIC_START + 27)
+#define IRQ_EB11MP_PMU_SCU7	(IRQ_EB_GIC_START + 28)
+
+#define IRQ_EB11MP_L220_EVENT	(IRQ_EB_GIC_START + 29)
+#define IRQ_EB11MP_L220_SLAVE	(IRQ_EB_GIC_START + 30)
+#define IRQ_EB11MP_L220_DECODE	(IRQ_EB_GIC_START + 31)
+
+#define IRQ_EB11MP_UART2	-1
+#define IRQ_EB11MP_UART3	-1
+#define IRQ_EB11MP_CLCD		-1
+#define IRQ_EB11MP_DMA		-1
+#define IRQ_EB11MP_WDOG		-1
+#define IRQ_EB11MP_GPIO0	-1
+#define IRQ_EB11MP_GPIO1	-1
+#define IRQ_EB11MP_GPIO2	-1
+#define IRQ_EB11MP_SCI		-1
+#define IRQ_EB11MP_SSP		-1
+
+#define NR_GIC_EB11MP		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_EB
+ */
+#define NR_IRQS_EB		(IRQ_EB_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_EB) \
+	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_EB
+#endif
+
+#if defined(CONFIG_REALVIEW_EB_ARM11MP) \
+	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_EB11MP
+#endif
+
+/*
+ * Core tile identification (REALVIEW_SYS_PROCID)
+ */
+#define REALVIEW_EB_PROC_MASK		0xFF000000
+#define REALVIEW_EB_PROC_ARM7TDMI	0x00000000
+#define REALVIEW_EB_PROC_ARM9		0x02000000
+#define REALVIEW_EB_PROC_ARM11		0x04000000
+#define REALVIEW_EB_PROC_ARM11MP	0x06000000
+
+#define check_eb_proc(proc_type)						\
+	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK)	\
+	 == proc_type)
+
+#ifdef CONFIG_REALVIEW_EB_ARM11MP
+#define core_tile_eb11mp()	check_eb_proc(REALVIEW_EB_PROC_ARM11MP)
+#else
+#define core_tile_eb11mp()	0
+#endif
+
+#endif	/* __ASM_ARCH_BOARD_EB_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
new file mode 100644
index 0000000..858eea7
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -0,0 +1,152 @@
+/*
+ * arch/arm/mach-realview/include/mach/board-pb1176.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_BOARD_PB1176_H
+#define __ASM_ARCH_BOARD_PB1176_H
+
+#include <mach/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PB1176_SCTL_BASE		0x10100000 /* System controller */
+#define REALVIEW_PB1176_SMC_BASE		0x10111000 /* SMC */
+#define REALVIEW_PB1176_DMC_BASE		0x10109000 /* DMC configuration */
+#define REALVIEW_PB1176_SDRAM67_BASE		0x70000000 /* SDRAM banks 6 and 7 */
+#define REALVIEW_PB1176_FLASH_BASE		0x30000000
+#define REALVIEW_PB1176_FLASH_SIZE		SZ_64M
+
+#define REALVIEW_PB1176_TIMER0_1_BASE		0x10104000 /* Timer 0 and 1 */
+#define REALVIEW_PB1176_TIMER2_3_BASE		0x10105000 /* Timer 2 and 3 */
+#define REALVIEW_PB1176_TIMER4_5_BASE		0x10106000 /* Timer 4 and 5 */
+#define REALVIEW_PB1176_WATCHDOG_BASE		0x10107000 /* watchdog interface */
+#define REALVIEW_PB1176_RTC_BASE		0x10108000 /* Real Time Clock */
+#define REALVIEW_PB1176_GPIO0_BASE		0x1010A000 /* GPIO port 0 */
+#define REALVIEW_PB1176_SSP_BASE		0x1010B000 /* Synchronous Serial Port */
+#define REALVIEW_PB1176_UART0_BASE		0x1010C000 /* UART 0 */
+#define REALVIEW_PB1176_UART1_BASE		0x1010D000 /* UART 1 */
+#define REALVIEW_PB1176_UART2_BASE		0x1010E000 /* UART 2 */
+#define REALVIEW_PB1176_UART3_BASE		0x1010F000 /* UART 3 */
+#define REALVIEW_PB1176_CLCD_BASE		0x10112000 /* CLCD */
+#define REALVIEW_PB1176_ETH_BASE		0x3A000000 /* Ethernet */
+#define REALVIEW_PB1176_USB_BASE		0x3B000000 /* USB */
+
+/*
+ * PCI regions
+ */
+#define REALVIEW_PB1176_PCI_BASE		0x60000000 /* PCI self config */
+#define REALVIEW_PB1176_PCI_CFG_BASE		0x61000000 /* PCI config */
+#define REALVIEW_PB1176_PCI_IO_BASE0		0x62000000 /* PCI IO region */
+#define REALVIEW_PB1176_PCI_MEM_BASE0		0x63000000 /* Memory region 1 */
+#define REALVIEW_PB1176_PCI_MEM_BASE1		0x64000000 /* Memory region 2 */
+#define REALVIEW_PB1176_PCI_MEM_BASE2		0x68000000 /* Memory region 3 */
+
+#define REALVIEW_PB1176_PCI_BASE_SIZE		0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE	0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE	0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE	0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE	0x04000000 /* 64MB */
+#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE	0x08000000 /* 128MB */
+
+#define REALVIEW_DC1176_GIC_CPU_BASE		0x10120000 /* GIC CPU interface, on devchip */
+#define REALVIEW_DC1176_GIC_DIST_BASE		0x10121000 /* GIC distributor, on devchip */
+#define REALVIEW_PB1176_GIC_CPU_BASE		0x10040000 /* GIC CPU interface, on FPGA */
+#define REALVIEW_PB1176_GIC_DIST_BASE		0x10041000 /* GIC distributor, on FPGA */
+#define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
+
+/*
+ * Irqs
+ */
+#define IRQ_DC1176_GIC_START			32
+#define IRQ_PB1176_GIC_START			64
+
+/*
+ * ARM1176 DevChip interrupt sources (primary GIC)
+ */
+#define IRQ_DC1176_WATCHDOG	(IRQ_DC1176_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
+#define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
+#define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
+#define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
+#define IRQ_DC1176_APC		(IRQ_DC1176_GIC_START + 11)
+#define IRQ_DC1176_IEC		(IRQ_DC1176_GIC_START + 12)
+#define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
+#define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
+#define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
+#define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
+#define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
+#define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
+#define IRQ_DC1176_UART3	(IRQ_DC1176_GIC_START + 21)	/* UART 3 on development chip */
+
+#define IRQ_DC1176_PB_IRQ2	(IRQ_DC1176_GIC_START + 30)	/* tile GIC */
+#define IRQ_DC1176_PB_IRQ1	(IRQ_DC1176_GIC_START + 31)	/* main GIC */
+
+/*
+ * RealView PB1176 interrupt sources (secondary GIC)
+ */
+#define IRQ_PB1176_MMCI0A	(IRQ_PB1176_GIC_START + 1)	/* Multimedia Card 0A */
+#define IRQ_PB1176_MMCI0B	(IRQ_PB1176_GIC_START + 2)	/* Multimedia Card 0A */
+#define IRQ_PB1176_KMI0		(IRQ_PB1176_GIC_START + 3)	/* Keyboard/Mouse port 0 */
+#define IRQ_PB1176_KMI1		(IRQ_PB1176_GIC_START + 4)	/* Keyboard/Mouse port 1 */
+#define IRQ_PB1176_SCI		(IRQ_PB1176_GIC_START + 5)
+#define IRQ_PB1176_UART4	(IRQ_PB1176_GIC_START + 6)	/* UART 4 on baseboard */
+#define IRQ_PB1176_CHARLCD	(IRQ_PB1176_GIC_START + 7)	/* Character LCD */
+#define IRQ_PB1176_GPIO1	(IRQ_PB1176_GIC_START + 8)
+#define IRQ_PB1176_GPIO2	(IRQ_PB1176_GIC_START + 9)
+#define IRQ_PB1176_ETH		(IRQ_PB1176_GIC_START + 10)	/* Ethernet controller */
+#define IRQ_PB1176_USB		(IRQ_PB1176_GIC_START + 11)	/* USB controller */
+
+#define IRQ_PB1176_PISMO	(IRQ_PB1176_GIC_START + 16)
+
+#define IRQ_PB1176_AACI		(IRQ_PB1176_GIC_START + 19)	/* Audio Codec */
+
+#define IRQ_PB1176_TIMER0_1	(IRQ_PB1176_GIC_START + 22)
+#define IRQ_PB1176_TIMER2_3	(IRQ_PB1176_GIC_START + 23)
+#define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
+#define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
+
+#define IRQ_PB1176_GPIO0	-1
+#define IRQ_PB1176_SSP		-1
+#define IRQ_PB1176_SCTL		-1
+
+#define NR_GIC_PB1176		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB1176
+ */
+#define NR_IRQS_PB1176		(IRQ_DC1176_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB1176)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PB1176
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PB1176
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PB1176 */
+
+#endif	/* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h
new file mode 100644
index 0000000..ecd80e58
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h
@@ -0,0 +1,186 @@
+/*
+ * arch/arm/mach-realview/include/mach/board-pb11mp.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_BOARD_PB11MP_H
+#define __ASM_ARCH_BOARD_PB11MP_H
+
+#include <mach/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PB11MP_UART0_BASE		0x10009000	/* UART 0 */
+#define REALVIEW_PB11MP_UART1_BASE		0x1000A000	/* UART 1 */
+#define REALVIEW_PB11MP_UART2_BASE		0x1000B000	/* UART 2 */
+#define REALVIEW_PB11MP_UART3_BASE		0x1000C000	/* UART 3 */
+#define REALVIEW_PB11MP_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
+#define REALVIEW_PB11MP_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
+#define REALVIEW_PB11MP_WATCHDOG_BASE		0x10010000	/* watchdog interface */
+#define REALVIEW_PB11MP_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
+#define REALVIEW_PB11MP_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
+#define REALVIEW_PB11MP_GPIO0_BASE		0x10013000	/* GPIO port 0 */
+#define REALVIEW_PB11MP_RTC_BASE		0x10017000	/* Real Time Clock */
+#define REALVIEW_PB11MP_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
+#define REALVIEW_PB11MP_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
+#define REALVIEW_PB11MP_SCTL_BASE		0x1001A000	/* System Controller */
+#define REALVIEW_PB11MP_CLCD_BASE		0x10020000	/* CLCD */
+#define REALVIEW_PB11MP_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
+#define REALVIEW_PB11MP_DMC_BASE		0x100E0000	/* DMC configuration */
+#define REALVIEW_PB11MP_SMC_BASE		0x100E1000	/* SMC configuration */
+#define REALVIEW_PB11MP_CAN_BASE		0x100E2000	/* CAN bus */
+#define REALVIEW_PB11MP_CF_BASE			0x18000000	/* Compact flash */
+#define REALVIEW_PB11MP_CF_MEM_BASE		0x18003000	/* SMC for Compact flash */
+#define REALVIEW_PB11MP_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
+#define REALVIEW_PB11MP_FLASH0_BASE		0x40000000
+#define REALVIEW_PB11MP_FLASH0_SIZE		SZ_64M
+#define REALVIEW_PB11MP_FLASH1_BASE		0x44000000
+#define REALVIEW_PB11MP_FLASH1_SIZE		SZ_64M
+#define REALVIEW_PB11MP_ETH_BASE		0x4E000000	/* Ethernet */
+#define REALVIEW_PB11MP_USB_BASE		0x4F000000	/* USB */
+#define REALVIEW_PB11MP_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
+#define REALVIEW_PB11MP_LT_BASE			0xC0000000	/* Logic Tile expansion */
+#define REALVIEW_PB11MP_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
+#define REALVIEW_PB11MP_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
+
+#define REALVIEW_PB11MP_SYS_PLD_CTRL1		0x74
+
+/*
+ * PB11MPCore PCI regions
+ */
+#define REALVIEW_PB11MP_PCI_BASE		0x90040000	/* PCI-X Unit base */
+#define REALVIEW_PB11MP_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
+#define REALVIEW_PB11MP_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
+
+#define REALVIEW_PB11MP_PCI_BASE_SIZE		0x10000		/* 16 Kb */
+#define REALVIEW_PB11MP_PCI_IO_SIZE		0x1000		/* 4 Kb */
+#define REALVIEW_PB11MP_PCI_MEM_SIZE		0x20000000	/* 512 MB */
+
+/*
+ * Testchip peripheral and fpga gic regions
+ */
+#define REALVIEW_TC11MP_SCU_BASE		0x1F000000	/* IRQ, Test chip */
+#define REALVIEW_TC11MP_GIC_CPU_BASE		0x1F000100	/* Test chip interrupt controller CPU interface */
+#define REALVIEW_TC11MP_TWD_BASE		0x1F000700
+#define REALVIEW_TC11MP_TWD_SIZE		0x00000100
+#define REALVIEW_TC11MP_GIC_DIST_BASE		0x1F001000	/* Test chip interrupt controller distributor */
+#define REALVIEW_TC11MP_L220_BASE		0x1F002000	/* L220 registers */
+
+/*
+ * Irqs
+ */
+#define IRQ_TC11MP_GIC_START			32
+#define IRQ_PB11MP_GIC_START			64
+
+/*
+ * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
+ */
+#define IRQ_TC11MP_AACI		(IRQ_TC11MP_GIC_START + 0)
+#define IRQ_TC11MP_TIMER0_1	(IRQ_TC11MP_GIC_START + 1)
+#define IRQ_TC11MP_TIMER2_3	(IRQ_TC11MP_GIC_START + 2)
+#define IRQ_TC11MP_USB		(IRQ_TC11MP_GIC_START + 3)
+#define IRQ_TC11MP_UART0	(IRQ_TC11MP_GIC_START + 4)
+#define IRQ_TC11MP_UART1	(IRQ_TC11MP_GIC_START + 5)
+#define IRQ_TC11MP_RTC		(IRQ_TC11MP_GIC_START + 6)
+#define IRQ_TC11MP_KMI0		(IRQ_TC11MP_GIC_START + 7)
+#define IRQ_TC11MP_KMI1		(IRQ_TC11MP_GIC_START + 8)
+#define IRQ_TC11MP_ETH		(IRQ_TC11MP_GIC_START + 9)
+#define IRQ_TC11MP_PB_IRQ1	(IRQ_TC11MP_GIC_START + 10)		/* main GIC */
+#define IRQ_TC11MP_PB_IRQ2	(IRQ_TC11MP_GIC_START + 11)		/* tile GIC */
+#define IRQ_TC11MP_PB_FIQ1	(IRQ_TC11MP_GIC_START + 12)		/* main GIC */
+#define IRQ_TC11MP_PB_FIQ2	(IRQ_TC11MP_GIC_START + 13)		/* tile GIC */
+#define IRQ_TC11MP_MMCI0A	(IRQ_TC11MP_GIC_START + 14)
+#define IRQ_TC11MP_MMCI0B	(IRQ_TC11MP_GIC_START + 15)
+
+#define IRQ_TC11MP_PMU_CPU0	(IRQ_TC11MP_GIC_START + 17)
+#define IRQ_TC11MP_PMU_CPU1	(IRQ_TC11MP_GIC_START + 18)
+#define IRQ_TC11MP_PMU_CPU2	(IRQ_TC11MP_GIC_START + 19)
+#define IRQ_TC11MP_PMU_CPU3	(IRQ_TC11MP_GIC_START + 20)
+#define IRQ_TC11MP_PMU_SCU0	(IRQ_TC11MP_GIC_START + 21)
+#define IRQ_TC11MP_PMU_SCU1	(IRQ_TC11MP_GIC_START + 22)
+#define IRQ_TC11MP_PMU_SCU2	(IRQ_TC11MP_GIC_START + 23)
+#define IRQ_TC11MP_PMU_SCU3	(IRQ_TC11MP_GIC_START + 24)
+#define IRQ_TC11MP_PMU_SCU4	(IRQ_TC11MP_GIC_START + 25)
+#define IRQ_TC11MP_PMU_SCU5	(IRQ_TC11MP_GIC_START + 26)
+#define IRQ_TC11MP_PMU_SCU6	(IRQ_TC11MP_GIC_START + 27)
+#define IRQ_TC11MP_PMU_SCU7	(IRQ_TC11MP_GIC_START + 28)
+
+#define IRQ_TC11MP_L220_EVENT	(IRQ_TC11MP_GIC_START + 29)
+#define IRQ_TC11MP_L220_SLAVE	(IRQ_TC11MP_GIC_START + 30)
+#define IRQ_TC11MP_L220_DECODE	(IRQ_TC11MP_GIC_START + 31)
+
+/*
+ * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
+ */
+#define IRQ_PB11MP_WATCHDOG	(IRQ_PB11MP_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PB11MP_SOFT		(IRQ_PB11MP_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PB11MP_COMMRx	(IRQ_PB11MP_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PB11MP_COMMTx	(IRQ_PB11MP_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PB11MP_GPIO0	(IRQ_PB11MP_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PB11MP_GPIO1	(IRQ_PB11MP_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PB11MP_GPIO2	(IRQ_PB11MP_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PB11MP_RTC_GIC1	(IRQ_PB11MP_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PB11MP_SSP		(IRQ_PB11MP_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PB11MP_UART0_GIC1	(IRQ_PB11MP_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PB11MP_UART1_GIC1	(IRQ_PB11MP_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PB11MP_UART2	(IRQ_PB11MP_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PB11MP_UART3	(IRQ_PB11MP_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PB11MP_SCI		(IRQ_PB11MP_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PB11MP_MMCI0A_GIC1	(IRQ_PB11MP_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PB11MP_MMCI0B_GIC1	(IRQ_PB11MP_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PB11MP_AACI_GIC1	(IRQ_PB11MP_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PB11MP_KMI0_GIC1	(IRQ_PB11MP_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PB11MP_KMI1_GIC1	(IRQ_PB11MP_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PB11MP_CHARLCD	(IRQ_PB11MP_GIC_START + 22)	/* Character LCD */
+#define IRQ_PB11MP_CLCD		(IRQ_PB11MP_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PB11MP_DMAC		(IRQ_PB11MP_GIC_START + 24)	/* DMA controller */
+#define IRQ_PB11MP_PWRFAIL	(IRQ_PB11MP_GIC_START + 25)	/* Power failure */
+#define IRQ_PB11MP_PISMO	(IRQ_PB11MP_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PB11MP_DoC		(IRQ_PB11MP_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PB11MP_ETH_GIC1	(IRQ_PB11MP_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PB11MP_USB_GIC1	(IRQ_PB11MP_GIC_START + 29)	/* USB controller */
+#define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
+
+#define IRQ_PB11MP_SMC		-1
+#define IRQ_PB11MP_SCTL		-1
+
+#define NR_GIC_PB11MP		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB11MP
+ */
+#define NR_IRQS_PB11MP		(IRQ_TC11MP_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB11MP)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PB11MP
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PB11MP
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PB11MP */
+
+#endif	/* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
new file mode 100644
index 0000000..7196bca
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/* arch/arm/mach-realview/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx,      #0x10000000
+		movne	\rx,      #0xf0000000	@ virtual base
+		orr	\rx, \rx, #0x00009000
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-realview/include/mach/dma.h b/arch/arm/mach-realview/include/mach/dma.h
new file mode 100644
index 0000000..f1a5a1a
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/dma.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-realview/include/mach/dma.h
+ *
+ *  Copyright (C) 2003 ARM Limited.
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-realview/include/mach/entry-macro.S b/arch/arm/mach-realview/include/mach/entry-macro.S
new file mode 100644
index 0000000..340a5c2
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/entry-macro.S
@@ -0,0 +1,81 @@
+/*
+ * arch/arm/mach-realview/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for RealView platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =gic_cpu_base_addr
+		ldr	\base, [\base]
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		/*
+		 * The interrupt numbering scheme is defined in the
+		 * interrupt controller spec.  To wit:
+		 *
+		 * Interrupts 0-15 are IPI
+		 * 16-28 are reserved
+		 * 29-31 are local.  We allow 30 to be used for the watchdog.
+		 * 32-1020 are global
+		 * 1021-1022 are reserved
+		 * 1023 is "spurious" (no interrupt)
+		 *
+		 * For now, we ignore all local interrupts so only return an interrupt if it's
+		 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
+		 *
+		 * A simple read from the controller will tell us the number of the highest
+                 * priority enabled interrupt.  We then just need to check whether it is in the
+		 * valid range for an IRQ (30-1020 inclusive).
+		 */
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
+
+		ldr	\tmp, =1021
+
+		bic     \irqnr, \irqstat, #0x1c00
+
+		cmp     \irqnr, #29
+		cmpcc	\irqnr, \irqnr
+		cmpne	\irqnr, \tmp
+		cmpcs	\irqnr, \irqnr
+
+		.endm
+
+		/* We assume that irqstat (the raw value of the IRQ acknowledge
+		 * register) is preserved from the macro above.
+		 * If there is an IPI, we immediately signal end of interrupt on the
+		 * controller, since this requires the original irqstat value which
+		 * we won't easily be able to recreate later.
+		 */
+
+		.macro test_for_ipi, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		cmp	\irqnr, #16
+		strcc	\irqstat, [\base, #GIC_CPU_EOI]
+		cmpcs	\irqnr, \irqnr
+		.endm
+
+		/* As above, this assumes that irqstat and base are preserved.. */
+
+		.macro test_for_ltirq, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		mov 	\tmp, #0
+		cmp	\irqnr, #29
+		moveq	\tmp, #1
+		streq	\irqstat, [\base, #GIC_CPU_EOI]
+		cmp	\tmp, #0
+		.endm
diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h
new file mode 100644
index 0000000..79a93b3
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/hardware.h
@@ -0,0 +1,31 @@
+/*
+ *  arch/arm/mach-realview/include/mach/hardware.h
+ *
+ *  This file contains the hardware definitions of the RealView boards.
+ *
+ *  Copyright (C) 2003 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + 0xf0000000)
+#define __io_address(n)		__io(IO_ADDRESS(n))
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/io.h b/arch/arm/mach-realview/include/mach/io.h
new file mode 100644
index 0000000..aa06942
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/io.h
@@ -0,0 +1,33 @@
+/*
+ *  arch/arm/mach-realview/include/mach/io.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h
new file mode 100644
index 0000000..02a9185
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-realview/include/mach/irqs.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <mach/board-eb.h>
+#include <mach/board-pb11mp.h>
+#include <mach/board-pb1176.h>
+
+#define IRQ_LOCALTIMER		29
+#define IRQ_LOCALWDOG		30
+
+#define IRQ_GIC_START		32
+
+#ifndef NR_IRQS
+#error "NR_IRQS not defined by the board-specific files"
+#endif
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
new file mode 100644
index 0000000..0e67348
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-realview/include/mach/memory.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET		UL(0x00000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
+#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h
new file mode 100644
index 0000000..4034b54
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/platform.h
@@ -0,0 +1,293 @@
+/*
+ * arch/arm/mach-realview/include/mach/platform.h
+ *
+ * Copyright (c) ARM Limited 2003.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_PLATFORM_H
+#define __ASM_ARCH_PLATFORM_H
+
+/*
+ * Memory definitions
+ */
+#define REALVIEW_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
+#define REALVIEW_BOOT_ROM_HI          0x30000000
+#define REALVIEW_BOOT_ROM_BASE        REALVIEW_BOOT_ROM_HI	 /*  Normal position */
+#define REALVIEW_BOOT_ROM_SIZE        SZ_64M
+
+#define REALVIEW_SSRAM_BASE           /* REALVIEW_SSMC_BASE ? */
+#define REALVIEW_SSRAM_SIZE           SZ_2M
+
+/* 
+ *  SDRAM
+ */
+#define REALVIEW_SDRAM_BASE           0x00000000
+
+/* 
+ *  Logic expansion modules
+ * 
+ */
+
+
+/* ------------------------------------------------------------------------
+ *  RealView Registers
+ * ------------------------------------------------------------------------
+ * 
+ */
+#define REALVIEW_SYS_ID_OFFSET               0x00
+#define REALVIEW_SYS_SW_OFFSET               0x04
+#define REALVIEW_SYS_LED_OFFSET              0x08
+#define REALVIEW_SYS_OSC0_OFFSET             0x0C
+
+#define REALVIEW_SYS_OSC1_OFFSET             0x10
+#define REALVIEW_SYS_OSC2_OFFSET             0x14
+#define REALVIEW_SYS_OSC3_OFFSET             0x18
+#define REALVIEW_SYS_OSC4_OFFSET             0x1C	/* OSC1 for RealView/AB */
+
+#define REALVIEW_SYS_LOCK_OFFSET             0x20
+#define REALVIEW_SYS_100HZ_OFFSET            0x24
+#define REALVIEW_SYS_CFGDATA1_OFFSET         0x28
+#define REALVIEW_SYS_CFGDATA2_OFFSET         0x2C
+#define REALVIEW_SYS_FLAGS_OFFSET            0x30
+#define REALVIEW_SYS_FLAGSSET_OFFSET         0x30
+#define REALVIEW_SYS_FLAGSCLR_OFFSET         0x34
+#define REALVIEW_SYS_NVFLAGS_OFFSET          0x38
+#define REALVIEW_SYS_NVFLAGSSET_OFFSET       0x38
+#define REALVIEW_SYS_NVFLAGSCLR_OFFSET       0x3C
+#define REALVIEW_SYS_RESETCTL_OFFSET         0x40
+#define REALVIEW_SYS_PCICTL_OFFSET           0x44
+#define REALVIEW_SYS_MCI_OFFSET              0x48
+#define REALVIEW_SYS_FLASH_OFFSET            0x4C
+#define REALVIEW_SYS_CLCD_OFFSET             0x50
+#define REALVIEW_SYS_CLCDSER_OFFSET          0x54
+#define REALVIEW_SYS_BOOTCS_OFFSET           0x58
+#define REALVIEW_SYS_24MHz_OFFSET            0x5C
+#define REALVIEW_SYS_MISC_OFFSET             0x60
+#define REALVIEW_SYS_IOSEL_OFFSET            0x70
+#define REALVIEW_SYS_PROCID_OFFSET           0x84
+#define REALVIEW_SYS_TEST_OSC0_OFFSET        0xC0
+#define REALVIEW_SYS_TEST_OSC1_OFFSET        0xC4
+#define REALVIEW_SYS_TEST_OSC2_OFFSET        0xC8
+#define REALVIEW_SYS_TEST_OSC3_OFFSET        0xCC
+#define REALVIEW_SYS_TEST_OSC4_OFFSET        0xD0
+
+#define REALVIEW_SYS_BASE                    0x10000000
+#define REALVIEW_SYS_ID                      (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET)
+#define REALVIEW_SYS_SW                      (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET)
+#define REALVIEW_SYS_LED                     (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET)
+#define REALVIEW_SYS_OSC0                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET)
+#define REALVIEW_SYS_OSC1                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET)
+
+#define REALVIEW_SYS_LOCK                    (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET)
+#define REALVIEW_SYS_100HZ                   (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET)
+#define REALVIEW_SYS_CFGDATA1                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET)
+#define REALVIEW_SYS_CFGDATA2                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET)
+#define REALVIEW_SYS_FLAGS                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET)
+#define REALVIEW_SYS_FLAGSSET                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET)
+#define REALVIEW_SYS_FLAGSCLR                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET)
+#define REALVIEW_SYS_NVFLAGS                 (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET)
+#define REALVIEW_SYS_NVFLAGSSET              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET)
+#define REALVIEW_SYS_NVFLAGSCLR              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET)
+#define REALVIEW_SYS_RESETCTL                (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET)
+#define REALVIEW_SYS_PCICTL                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET)
+#define REALVIEW_SYS_MCI                     (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET)
+#define REALVIEW_SYS_FLASH                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET)
+#define REALVIEW_SYS_CLCD                    (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET)
+#define REALVIEW_SYS_CLCDSER                 (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET)
+#define REALVIEW_SYS_BOOTCS                  (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET)
+#define REALVIEW_SYS_24MHz                   (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET)
+#define REALVIEW_SYS_MISC                    (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET)
+#define REALVIEW_SYS_IOSEL                   (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET)
+#define REALVIEW_SYS_PROCID                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PROCID_OFFSET)
+#define REALVIEW_SYS_TEST_OSC0               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET)
+#define REALVIEW_SYS_TEST_OSC1               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET)
+#define REALVIEW_SYS_TEST_OSC2               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET)
+#define REALVIEW_SYS_TEST_OSC3               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
+#define REALVIEW_SYS_TEST_OSC4               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
+
+/* 
+ * Values for REALVIEW_SYS_RESET_CTRL
+ */
+#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR    0x01
+#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT   0x02
+#define REALVIEW_SYS_CTRL_RESET_DLLRESET     0x03
+#define REALVIEW_SYS_CTRL_RESET_PLLRESET     0x04
+#define REALVIEW_SYS_CTRL_RESET_POR          0x05
+#define REALVIEW_SYS_CTRL_RESET_DoC          0x06
+
+#define REALVIEW_SYS_CTRL_LED         (1 << 0)
+
+
+/* ------------------------------------------------------------------------
+ *  RealView control registers
+ * ------------------------------------------------------------------------
+ */
+
+/* 
+ * REALVIEW_IDFIELD
+ *
+ * 31:24 = manufacturer (0x41 = ARM)
+ * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
+ * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
+ * 11:4  = build value
+ * 3:0   = revision number (0x1 = rev B (AHB))
+ */
+
+/*
+ * REALVIEW_SYS_LOCK
+ *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
+ *     SYS_CLD, SYS_BOOTCS
+ */
+#define REALVIEW_SYS_LOCK_LOCKED    (1 << 16)
+#define REALVIEW_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
+
+/*
+ * REALVIEW_SYS_FLASH
+ */
+#define REALVIEW_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
+
+/*
+ * REALVIEW_INTREG
+ *     - used to acknowledge and control MMCI and UART interrupts 
+ */
+#define REALVIEW_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
+#define REALVIEW_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
+#define REALVIEW_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
+                                                /* write 1 to acknowledge and clear               */
+#define REALVIEW_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
+#define REALVIEW_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
+
+/*
+ * RealView common peripheral addresses
+ */
+#define REALVIEW_SCTL_BASE            0x10001000	/* System controller */
+#define REALVIEW_I2C_BASE             0x10002000	/* I2C control */
+#define REALVIEW_AACI_BASE            0x10004000	/* Audio */
+#define REALVIEW_MMCI0_BASE           0x10005000	/* MMC interface */
+#define REALVIEW_KMI0_BASE            0x10006000	/* KMI interface */
+#define REALVIEW_KMI1_BASE            0x10007000	/* KMI 2nd interface */
+#define REALVIEW_CHAR_LCD_BASE        0x10008000	/* Character LCD */
+#define REALVIEW_SCI_BASE             0x1000E000	/* Smart card controller */
+#define REALVIEW_GPIO1_BASE           0x10014000	/* GPIO port 1 */
+#define REALVIEW_GPIO2_BASE           0x10015000	/* GPIO port 2 */
+#define REALVIEW_DMC_BASE             0x10018000	/* DMC configuration */
+#define REALVIEW_DMAC_BASE            0x10030000	/* DMA controller */
+
+/* PCI space */
+#define REALVIEW_PCI_BASE             0x41000000	/* PCI Interface */
+#define REALVIEW_PCI_CFG_BASE	      0x42000000
+#define REALVIEW_PCI_MEM_BASE0        0x44000000
+#define REALVIEW_PCI_MEM_BASE1        0x50000000
+#define REALVIEW_PCI_MEM_BASE2        0x60000000
+/* Sizes of above maps */
+#define REALVIEW_PCI_BASE_SIZE	       0x01000000
+#define REALVIEW_PCI_CFG_BASE_SIZE    0x02000000
+#define REALVIEW_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
+#define REALVIEW_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
+#define REALVIEW_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
+
+#define REALVIEW_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
+#define REALVIEW_LT_BASE              0x80000000	/* Logic Tile expansion */
+
+/*
+ * Disk on Chip
+ */
+#define REALVIEW_DOC_BASE             0x2C000000
+#define REALVIEW_DOC_SIZE             (16 << 20)
+#define REALVIEW_DOC_PAGE_SIZE        512
+#define REALVIEW_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
+
+#define ERASE_UNIT_PAGES    32
+#define START_PAGE          0x80
+
+/* 
+ *  LED settings, bits [7:0]
+ */
+#define REALVIEW_SYS_LED0             (1 << 0)
+#define REALVIEW_SYS_LED1             (1 << 1)
+#define REALVIEW_SYS_LED2             (1 << 2)
+#define REALVIEW_SYS_LED3             (1 << 3)
+#define REALVIEW_SYS_LED4             (1 << 4)
+#define REALVIEW_SYS_LED5             (1 << 5)
+#define REALVIEW_SYS_LED6             (1 << 6)
+#define REALVIEW_SYS_LED7             (1 << 7)
+
+#define ALL_LEDS                  0xFF
+
+#define LED_BANK                  REALVIEW_SYS_LED
+
+/* 
+ * Control registers
+ */
+#define REALVIEW_IDFIELD_OFFSET	0x0	/* RealView build information */
+#define REALVIEW_FLASHPROG_OFFSET	0x4	/* Flash devices */
+#define REALVIEW_INTREG_OFFSET		0x8	/* Interrupt control */
+#define REALVIEW_DECODE_OFFSET		0xC	/* Fitted logic modules */
+
+/* 
+ *  Application Flash
+ * 
+ */
+#define FLASH_BASE                      REALVIEW_FLASH_BASE
+#define FLASH_SIZE                      REALVIEW_FLASH_SIZE
+#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
+#define FLASH_BLOCK_SIZE                SZ_128K
+
+/* 
+ *  Boot Flash
+ * 
+ */
+#define EPROM_BASE                      REALVIEW_BOOT_ROM_HI
+#define EPROM_SIZE                      REALVIEW_BOOT_ROM_SIZE
+#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
+
+/* 
+ *  Clean base - dummy
+ * 
+ */
+#define CLEAN_BASE                      EPROM_BASE
+
+/*
+ * System controller bit assignment
+ */
+#define REALVIEW_REFCLK	0
+#define REALVIEW_TIMCLK	1
+
+#define REALVIEW_TIMER1_EnSel	15
+#define REALVIEW_TIMER2_EnSel	17
+#define REALVIEW_TIMER3_EnSel	19
+#define REALVIEW_TIMER4_EnSel	21
+
+
+#define MAX_TIMER                       2
+#define MAX_PERIOD                      699050
+#define TICKS_PER_uSEC                  1
+
+/* 
+ *  These are useconds NOT ticks.  
+ * 
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+#define REALVIEW_CSR_BASE             0x10000000
+#define REALVIEW_CSR_SIZE             0x10000000
+
+#endif	/* __ASM_ARCH_PLATFORM_H */
diff --git a/include/asm-arm/arch-realview/scu.h b/arch/arm/mach-realview/include/mach/scu.h
similarity index 100%
rename from include/asm-arm/arch-realview/scu.h
rename to arch/arm/mach-realview/include/mach/scu.h
diff --git a/include/asm-arm/arch-realview/smp.h b/arch/arm/mach-realview/include/mach/smp.h
similarity index 100%
rename from include/asm-arm/arch-realview/smp.h
rename to arch/arm/mach-realview/include/mach/smp.h
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
new file mode 100644
index 0000000..4d3c8f3
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/system.h
@@ -0,0 +1,51 @@
+/*
+ *  arch/arm/mach-realview/include/mach/system.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <mach/platform.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET;
+	unsigned int val;
+
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	val = __raw_readl(hdr_ctrl);
+	val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR;
+	__raw_writel(val, hdr_ctrl);
+}
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/timex.h b/arch/arm/mach-realview/include/mach/timex.h
new file mode 100644
index 0000000..4eeb069
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/timex.h
@@ -0,0 +1,23 @@
+/*
+ *  arch/arm/mach-realview/include/mach/timex.h
+ *
+ *  RealView architecture timex specifications
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h
new file mode 100644
index 0000000..79f50f2
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/uncompress.h
@@ -0,0 +1,72 @@
+/*
+ *  arch/arm/mach-realview/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/board-eb.h>
+#include <mach/board-pb11mp.h>
+#include <mach/board-pb1176.h>
+
+#define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
+#define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
+#define AMBA_UART_CR(base)	(*(volatile unsigned char *)((base) + 0x30))
+#define AMBA_UART_FR(base)	(*(volatile unsigned char *)((base) + 0x18))
+
+/*
+ * Return the UART base address
+ */
+static inline unsigned long get_uart_base(void)
+{
+	if (machine_is_realview_eb())
+		return REALVIEW_EB_UART0_BASE;
+	else if (machine_is_realview_pb11mp())
+		return REALVIEW_PB11MP_UART0_BASE;
+	else if (machine_is_realview_pb1176())
+		return REALVIEW_PB1176_UART0_BASE;
+	else
+		return 0;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	unsigned long base = get_uart_base();
+
+	while (AMBA_UART_FR(base) & (1 << 5))
+		barrier();
+
+	AMBA_UART_DR(base) = c;
+}
+
+static inline void flush(void)
+{
+	unsigned long base = get_uart_base();
+
+	while (AMBA_UART_FR(base) & (1 << 3))
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-realview/include/mach/vmalloc.h b/arch/arm/mach-realview/include/mach/vmalloc.h
new file mode 100644
index 0000000..48cbcc87
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-realview/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END		(PAGE_OFFSET + 0x18000000)
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
index 7631f3e..82fa1f2 100644
--- a/arch/arm/mach-realview/localtimer.c
+++ b/arch/arm/mach-realview/localtimer.c
@@ -20,7 +20,7 @@
 
 #include <asm/hardware/arm_twd.h>
 #include <asm/hardware/gic.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index c1e579c..1907d22 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -15,13 +15,13 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/board-eb.h>
-#include <asm/arch/board-pb11mp.h>
-#include <asm/arch/scu.h>
+#include <mach/board-eb.h>
+#include <mach/board-pb11mp.h>
+#include <mach/scu.h>
 
 extern void realview_secondary_startup(void);
 
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 66c1f3e..19a9968 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
@@ -38,8 +38,8 @@
 #include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/board-eb.h>
-#include <asm/arch/irqs.h>
+#include <mach/board-eb.h>
+#include <mach/irqs.h>
 
 #include "core.h"
 #include "clock.h"
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index a00588a..0986cbd 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
@@ -39,8 +39,8 @@
 #include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/board-pb1176.h>
-#include <asm/arch/irqs.h>
+#include <mach/board-pb1176.h>
+#include <mach/irqs.h>
 
 #include "core.h"
 #include "clock.h"
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 0188987..f4e7135 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
@@ -39,8 +39,8 @@
 #include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/board-pb11mp.h>
-#include <asm/arch/irqs.h>
+#include <mach/board-pb11mp.h>
+#include <mach/irqs.h>
 
 #include "core.h"
 #include "clock.h"
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index fb1d42b..4b19fe4 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -20,7 +20,7 @@
 #include <asm/fiq.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/uaccess.h>
 
 #include <asm/mach/dma.h>
diff --git a/arch/arm/mach-rpc/include/mach/acornfb.h b/arch/arm/mach-rpc/include/mach/acornfb.h
new file mode 100644
index 0000000..395d762
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/acornfb.h
@@ -0,0 +1,140 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/acornfb.h
+ *
+ *  Copyright (C) 1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  AcornFB architecture specific code
+ */
+
+#define acornfb_bandwidth(var) ((var)->pixclock * 8 / (var)->bits_per_pixel)
+
+static inline int
+acornfb_valid_pixrate(struct fb_var_screeninfo *var)
+{
+	u_long limit;
+
+	if (!var->pixclock)
+		return 0;
+
+	/*
+	 * Limits below are taken from RISC OS bandwidthlimit file
+	 */
+	if (current_par.using_vram) {
+		if (current_par.vram_half_sam == 2048)
+			limit = 6578;
+		else
+			limit = 13157;
+	} else {
+		limit = 26315;
+	}
+
+	return acornfb_bandwidth(var) >= limit;
+}
+
+/*
+ * Try to find the best PLL parameters for the pixel clock.
+ * This algorithm seems to give best predictable results,
+ * and produces the same values as detailed in the VIDC20
+ * data sheet.
+ */
+static inline u_int
+acornfb_vidc20_find_pll(u_int pixclk)
+{
+	u_int r, best_r = 2, best_v = 2;
+	int best_d = 0x7fffffff;
+
+	for (r = 2; r <= 32; r++) {
+		u_int rr, v, p;
+		int d;
+
+		rr = 41667 * r;
+
+		v = (rr + pixclk / 2) / pixclk;
+
+		if (v > 32 || v < 2)
+			continue;
+
+		p = (rr + v / 2) / v;
+
+		d = pixclk - p;
+
+		if (d < 0)
+			d = -d;
+
+		if (d < best_d) {
+			best_d = d;
+			best_v = v - 1;
+			best_r = r - 1;
+		}
+
+		if (d == 0)
+			break;
+	}
+
+	return best_v << 8 | best_r;
+}
+
+static inline void
+acornfb_vidc20_find_rates(struct vidc_timing *vidc,
+			  struct fb_var_screeninfo *var)
+{
+	u_int div;
+
+	/* Select pixel-clock divisor to keep PLL in range */
+	div = var->pixclock / 9090; /*9921*/
+
+	/* Limit divisor */
+	if (div == 0)
+		div = 1;
+	if (div > 8)
+		div = 8;
+
+	/* Encode divisor to VIDC20 setting */
+	switch (div) {
+	case 1:	vidc->control |= VIDC20_CTRL_PIX_CK;  break;
+	case 2:	vidc->control |= VIDC20_CTRL_PIX_CK2; break;
+	case 3:	vidc->control |= VIDC20_CTRL_PIX_CK3; break;
+	case 4:	vidc->control |= VIDC20_CTRL_PIX_CK4; break;
+	case 5:	vidc->control |= VIDC20_CTRL_PIX_CK5; break;
+	case 6:	vidc->control |= VIDC20_CTRL_PIX_CK6; break;
+	case 7:	vidc->control |= VIDC20_CTRL_PIX_CK7; break;
+	case 8: vidc->control |= VIDC20_CTRL_PIX_CK8; break;
+	}
+
+	/*
+	 * With VRAM, the FIFO can be set to the highest possible setting
+	 * because there are no latency considerations for other memory
+	 * accesses. However, in 64 bit bus mode the FIFO preload value
+	 * must not be set to VIDC20_CTRL_FIFO_28 because this will let
+	 * the FIFO overflow. See VIDC20 manual page 33 (6.0 Setting the
+	 * FIFO preload value).
+	 */
+	if (current_par.using_vram) {
+		if (current_par.vram_half_sam == 2048)
+			vidc->control |= VIDC20_CTRL_FIFO_24;
+		else
+			vidc->control |= VIDC20_CTRL_FIFO_28;
+	} else {
+		unsigned long bandwidth = acornfb_bandwidth(var);
+
+		/* Encode bandwidth as VIDC20 setting */
+		if (bandwidth > 33334)		/* < 30.0MB/s */
+			vidc->control |= VIDC20_CTRL_FIFO_16;
+		else if (bandwidth > 26666)	/* < 37.5MB/s */
+			vidc->control |= VIDC20_CTRL_FIFO_20;
+		else if (bandwidth > 22222)	/* < 45.0MB/s */
+			vidc->control |= VIDC20_CTRL_FIFO_24;
+		else				/* > 45.0MB/s */
+			vidc->control |= VIDC20_CTRL_FIFO_28;
+	}
+
+	/* Find the PLL values */
+	vidc->pll_ctl = acornfb_vidc20_find_pll(var->pixclock / div);
+}
+
+#define acornfb_default_control()	(VIDC20_CTRL_PIX_VCLK)
+#define acornfb_default_econtrol()	(VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3))
diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S
new file mode 100644
index 0000000..b2a939ff
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/debug-macro.S
@@ -0,0 +1,25 @@
+/* arch/arm/mach-rpc/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x03000000
+		movne	\rx, #0xe0000000
+		orr	\rx, \rx, #0x00010000
+		orr	\rx, \rx, #0x00000fe0
+		.endm
+
+#define UART_SHIFT	2
+#define FLOW_CONTROL
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-rpc/include/mach/dma.h b/arch/arm/mach-rpc/include/mach/dma.h
new file mode 100644
index 0000000..360b56f
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/dma.h
@@ -0,0 +1,33 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/dma.h
+ *
+ *  Copyright (C) 1997 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS		0xd0000000
+#define MAX_DMA_CHANNELS	8
+
+#define DMA_0			0
+#define DMA_1			1
+#define DMA_2			2
+#define DMA_3			3
+#define DMA_S0			4
+#define DMA_S1			5
+#define DMA_VIRTUAL_FLOPPY	6
+#define DMA_VIRTUAL_SOUND	7
+
+#define DMA_FLOPPY		DMA_VIRTUAL_FLOPPY
+
+#endif /* _ASM_ARCH_DMA_H */
+
diff --git a/arch/arm/mach-rpc/include/mach/entry-macro.S b/arch/arm/mach-rpc/include/mach/entry-macro.S
new file mode 100644
index 0000000..4e7e541
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/entry-macro.S
@@ -0,0 +1,16 @@
+#include <mach/hardware.h>
+#include <asm/hardware/entry-macro-iomd.S>
+
+	.equ	ioc_base_high, IOC_BASE & 0xff000000
+	.equ	ioc_base_low, IOC_BASE & 0x00ff0000
+
+	.macro  get_irqnr_preamble, base, tmp
+	mov	\base, #ioc_base_high		@ point at IOC
+	.if	ioc_base_low
+	orr	\base, \base, #ioc_base_low
+	.endif
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
diff --git a/arch/arm/mach-rpc/include/mach/hardware.h b/arch/arm/mach-rpc/include/mach/hardware.h
new file mode 100644
index 0000000..dde6b3c
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/hardware.h
@@ -0,0 +1,83 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/hardware.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains the hardware definitions of the RiscPC series machines.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/memory.h>
+
+#ifndef __ASSEMBLY__
+#define IOMEM(x) ((void __iomem *)(unsigned long)(x))
+#else
+#define IOMEM(x) x
+#endif /* __ASSEMBLY__ */
+
+/*
+ * What hardware must be present
+ */
+#define HAS_IOMD
+#define HAS_VIDC20
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+#define RAM_SIZE		0x10000000
+#define RAM_START		0x10000000
+
+#define EASI_SIZE		0x08000000	/* EASI I/O */
+#define EASI_START		0x08000000
+#define EASI_BASE		0xe5000000
+
+#define IO_START		0x03000000	/* I/O */
+#define IO_SIZE			0x01000000
+#define IO_BASE			IOMEM(0xe0000000)
+
+#define SCREEN_START		0x02000000	/* VRAM */
+#define SCREEN_END		0xdfc00000
+#define SCREEN_BASE		0xdf800000
+
+#define UNCACHEABLE_ADDR	0xdf010000
+
+/*
+ * IO Addresses
+ */
+#define VIDC_BASE		IOMEM(0xe0400000)
+#define EXPMASK_BASE		0xe0360000
+#define IOMD_BASE		IOMEM(0xe0200000)
+#define IOC_BASE		IOMEM(0xe0200000)
+#define PCIO_BASE		IOMEM(0xe0010000)
+#define FLOPPYDMA_BASE		IOMEM(0xe002a000)
+
+#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
+
+#define IO_EC_EASI_BASE		0x81400000
+#define IO_EC_IOC4_BASE		0x8009c000
+#define IO_EC_IOC_BASE		0x80090000
+#define IO_EC_MEMC8_BASE	0x8000ac00
+#define IO_EC_MEMC_BASE		0x80000000
+
+#define NETSLOT_BASE		0x0302b000
+#define NETSLOT_SIZE		0x00001000
+
+#define PODSLOT_IOC0_BASE	0x03240000
+#define PODSLOT_IOC4_BASE	0x03270000
+#define PODSLOT_IOC_SIZE	(1 << 14)
+#define PODSLOT_MEMC_BASE	0x03000000
+#define PODSLOT_MEMC_SIZE	(1 << 14)
+#define PODSLOT_EASI_BASE	0x08000000
+#define PODSLOT_EASI_SIZE	(1 << 24)
+
+#define	EXPMASK_STATUS		(EXPMASK_BASE + 0x00)
+#define EXPMASK_ENABLE		(EXPMASK_BASE + 0x04)
+
+#endif
diff --git a/arch/arm/mach-rpc/include/mach/io.h b/arch/arm/mach-rpc/include/mach/io.h
new file mode 100644
index 0000000..9f0553b7
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/io.h
@@ -0,0 +1,258 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/io.h
+ *
+ *  Copyright (C) 1997 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *  06-Dec-1997	RMK	Created.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * GCC is totally crap at loading/storing data.  We try to persuade it
+ * to do the right thing by using these whereever possible instead of
+ * the above.
+ */
+#define __arch_base_getb(b,o)			\
+ ({						\
+	unsigned int __v, __r = (b);		\
+	__asm__ __volatile__(			\
+		"ldrb	%0, [%1, %2]"		\
+		: "=r" (__v)			\
+		: "r" (__r), "Ir" (o));		\
+	__v;					\
+ })
+
+#define __arch_base_getl(b,o)			\
+ ({						\
+	unsigned int __v, __r = (b);		\
+	__asm__ __volatile__(			\
+		"ldr	%0, [%1, %2]"		\
+		: "=r" (__v)			\
+		: "r" (__r), "Ir" (o));		\
+	__v;					\
+ })
+
+#define __arch_base_putb(v,b,o)			\
+ ({						\
+	unsigned int __r = (b);			\
+	__asm__ __volatile__(			\
+		"strb	%0, [%1, %2]"		\
+		:				\
+		: "r" (v), "r" (__r), "Ir" (o));\
+ })
+
+#define __arch_base_putl(v,b,o)			\
+ ({						\
+	unsigned int __r = (b);			\
+	__asm__ __volatile__(			\
+		"str	%0, [%1, %2]"		\
+		:				\
+		: "r" (v), "r" (__r), "Ir" (o));\
+ })
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses.  PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
+ * and are translated to the start of IO.  Note that all addresses are
+ * shifted left!
+ */
+#define __PORT_PCIO(x)	(!((x) & 0x80000000))
+
+/*
+ * Dynamic IO functions.
+ */
+static inline void __outb (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"strb	%1, [%0, %2, lsl #2]	@ outb"
+	: "=&r" (temp)
+	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+static inline void __outw (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"str	%1, [%0, %2, lsl #2]	@ outw"
+	: "=&r" (temp)
+	: "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+static inline void __outl (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"str	%1, [%0, %2, lsl #2]	@ outl"
+	: "=&r" (temp)
+	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr)					\
+static inline unsigned sz __in##fnsuffix (unsigned int port)		\
+{										\
+	unsigned long temp, value;						\
+	__asm__ __volatile__(							\
+	"tst	%2, #0x80000000\n\t"						\
+	"mov	%0, %4\n\t"							\
+	"addeq	%0, %0, %3\n\t"							\
+	"ldr" instr "	%1, [%0, %2, lsl #2]	@ in" #fnsuffix			\
+	: "=&r" (temp), "=r" (value)						\
+	: "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)		\
+	: "cc");								\
+	return (unsigned sz)value;						\
+}
+
+static inline void __iomem *__deprecated __ioaddr(unsigned int port)
+{
+	void __iomem *ret;
+	if (__PORT_PCIO(port))
+		ret = PCIO_BASE;
+	else
+		ret = IO_BASE;
+	return ret + (port << 2);
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr)	\
+	DECLARE_DYN_IN(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"")
+DECLARE_IO(int,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port)							\
+({										\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"strb	%0, [%1, %2]	@ outbc"				\
+		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"strb	%0, [%1, %2]	@ outbc"				\
+		: : "r" (value), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inbc(port)								\
+({										\
+	unsigned char result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldrb	%0, [%1, %2]	@ inbc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldrb	%0, [%1, %2]	@ inbc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result;									\
+})
+
+#define __outwc(value,port)							\
+({										\
+	unsigned long __v = value;						\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outwc"				\
+		: : "r" (__v|__v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2));	\
+	else									\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outwc"				\
+		: : "r" (__v|__v<<16), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inwc(port)								\
+({										\
+	unsigned short result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inwc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inwc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result & 0xffff;							\
+})
+
+#define __outlc(value,port)							\
+({										\
+	unsigned long __v = value;						\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outlc"				\
+		: : "r" (__v), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outlc"				\
+		: : "r" (__v), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inlc(port)								\
+({										\
+	unsigned long result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inlc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inlc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result;									\
+})
+
+#define __ioaddrc(port)		__ioaddr(port)
+
+#define inb(p)	 	(__builtin_constant_p((p)) ? __inbc(p)    : __inb(p))
+#define inw(p)	 	(__builtin_constant_p((p)) ? __inwc(p)    : __inw(p))
+#define inl(p)	 	(__builtin_constant_p((p)) ? __inlc(p)    : __inl(p))
+#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
+/* the following macro is deprecated */
+#define ioaddr(port)	((unsigned long)__ioaddr((port)))
+
+#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
+#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
+
+#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
+#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+#define __mem_pci(x)	(x)
+
+#endif
diff --git a/arch/arm/mach-rpc/include/mach/irqs.h b/arch/arm/mach-rpc/include/mach/irqs.h
new file mode 100644
index 0000000..4ce6ca9
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/irqs.h
@@ -0,0 +1,46 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/irqs.h
+ *
+ *  Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define IRQ_PRINTER		0
+#define IRQ_BATLOW		1
+#define IRQ_FLOPPYINDEX		2
+#define IRQ_VSYNCPULSE		3
+#define IRQ_POWERON		4
+#define IRQ_TIMER0		5
+#define IRQ_TIMER1		6
+#define IRQ_IMMEDIATE		7
+#define IRQ_EXPCARDFIQ		8
+#define IRQ_HARDDISK		9
+#define IRQ_SERIALPORT		10
+#define IRQ_FLOPPYDISK		12
+#define IRQ_EXPANSIONCARD	13
+#define IRQ_KEYBOARDTX		14
+#define IRQ_KEYBOARDRX		15
+
+#define IRQ_DMA0		16
+#define IRQ_DMA1		17
+#define IRQ_DMA2		18
+#define IRQ_DMA3		19
+#define IRQ_DMAS0		20
+#define IRQ_DMAS1		21
+
+#define FIQ_FLOPPYDATA		0
+#define FIQ_ECONET		2
+#define FIQ_SERIALPORT		4
+#define FIQ_EXPANSIONCARD	6
+#define FIQ_FORCE		7
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START		64
+
+#define IRQ_TIMER		IRQ_TIMER0
+
diff --git a/arch/arm/mach-rpc/include/mach/memory.h b/arch/arm/mach-rpc/include/mach/memory.h
new file mode 100644
index 0000000..05425d5
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/memory.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/memory.h
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   20-Oct-1996 RMK	Created
+ *   31-Dec-1997 RMK	Fixed definitions to reduce warnings
+ *   11-Jan-1998 RMK	Uninlined to reduce hits on cache
+ *   08-Feb-1998 RMK	Added __virt_to_bus and __bus_to_virt
+ *   21-Mar-1999 RMK	Renamed to memory.h
+ *		 RMK	Added TASK_SIZE and PAGE_OFFSET
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x10000000)
+
+/*
+ * These are exactly the same on the RiscPC as the
+ * physical memory view.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * Cache flushing area - ROM
+ */
+#define FLUSH_BASE_PHYS		0x00000000
+#define FLUSH_BASE		0xdf000000
+
+#endif
diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h
new file mode 100644
index 0000000..54d6e3f
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/system.h
@@ -0,0 +1,27 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/system.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/iomd.h>
+#include <asm/io.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	iomd_writeb(0, IOMD_ROMCR0);
+
+	/*
+	 * Jump into the ROM
+	 */
+	cpu_reset(0);
+}
diff --git a/arch/arm/mach-rpc/include/mach/timex.h b/arch/arm/mach-rpc/include/mach/timex.h
new file mode 100644
index 0000000..dd75e73
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/timex.h
@@ -0,0 +1,17 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/timex.h
+ *
+ *  Copyright (C) 1997, 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  RiscPC architecture timex specifications
+ */
+
+/*
+ * On the RiscPC, the clock ticks at 2MHz.
+ */
+#define CLOCK_TICK_RATE		2000000
+
diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h
new file mode 100644
index 0000000..baa9c866
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/uncompress.h
@@ -0,0 +1,198 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VIDMEM ((char *)SCREEN_START)
+ 
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+
+int video_size_row;
+unsigned char bytes_per_char_h;
+extern unsigned long con_charconvtable[256];
+
+struct param_struct {
+	unsigned long page_size;
+	unsigned long nr_pages;
+	unsigned long ramdisk_size;
+	unsigned long mountrootrdonly;
+	unsigned long rootdev;
+	unsigned long video_num_cols;
+	unsigned long video_num_rows;
+	unsigned long video_x;
+	unsigned long video_y;
+	unsigned long memc_control_reg;
+	unsigned char sounddefault;
+	unsigned char adfsdrives;
+	unsigned char bytes_per_char_h;
+	unsigned char bytes_per_char_v;
+	unsigned long unused[256/4-11];
+};
+
+static const unsigned long palette_4[16] = {
+	0x00000000,
+	0x000000cc,
+	0x0000cc00,             /* Green   */
+	0x0000cccc,             /* Yellow  */
+	0x00cc0000,             /* Blue    */
+	0x00cc00cc,             /* Magenta */
+	0x00cccc00,             /* Cyan    */
+	0x00cccccc,             /* White   */
+	0x00000000,
+	0x000000ff,
+	0x0000ff00,
+	0x0000ffff,
+	0x00ff0000,
+	0x00ff00ff,
+	0x00ffff00,
+	0x00ffffff
+};
+
+#define palette_setpixel(p)	*(unsigned long *)(IO_START+0x00400000) = 0x10000000|((p) & 255)
+#define palette_write(v)	*(unsigned long *)(IO_START+0x00400000) = 0x00000000|((v) & 0x00ffffff)
+
+/*
+ * params_phys is a linker defined symbol - see
+ * arch/arm/boot/compressed/Makefile
+ */
+extern __attribute__((pure)) struct param_struct *params(void);
+#define params (params())
+
+#ifndef STANDALONE_DEBUG 
+static unsigned long video_num_cols;
+static unsigned long video_num_rows;
+static unsigned long video_x;
+static unsigned long video_y;
+static unsigned char bytes_per_char_v;
+static int white;
+
+/*
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+	extern void ll_write_char(char *, char c, char white);
+	int x,y;
+	char *ptr;
+
+	x = video_x;
+	y = video_y;
+
+	if (c == '\n') {
+		if (++y >= video_num_rows)
+			y--;
+	} else if (c == '\r') {
+		x = 0;
+	} else {
+		ptr = VIDMEM + ((y*video_num_cols*bytes_per_char_v+x)*bytes_per_char_h);
+		ll_write_char(ptr, c, white);
+		if (++x >= video_num_cols) {
+			x = 0;
+			if ( ++y >= video_num_rows ) {
+				y--;
+			}
+		}
+	}
+
+	video_x = x;
+	video_y = y;
+}
+
+static inline void flush(void)
+{
+}
+
+static void error(char *x);
+
+/*
+ * Setup for decompression
+ */
+static void arch_decomp_setup(void)
+{
+	int i;
+	struct tag *t = (struct tag *)params;
+	unsigned int nr_pages = 0, page_size = PAGE_SIZE;
+
+	if (t->hdr.tag == ATAG_CORE)
+	{
+		for (; t->hdr.size; t = tag_next(t))
+		{
+			if (t->hdr.tag == ATAG_VIDEOTEXT)
+			{
+				video_num_rows = t->u.videotext.video_lines;
+				video_num_cols = t->u.videotext.video_cols;
+				bytes_per_char_h = t->u.videotext.video_points;
+				bytes_per_char_v = t->u.videotext.video_points;
+				video_x = t->u.videotext.x;
+				video_y = t->u.videotext.y;
+			}
+
+			if (t->hdr.tag == ATAG_MEM)
+			{
+				page_size = PAGE_SIZE;
+				nr_pages += (t->u.mem.size / PAGE_SIZE);
+			}
+		}
+	}
+	else
+	{
+		nr_pages = params->nr_pages;
+		page_size = params->page_size;
+		video_num_rows = params->video_num_rows;
+		video_num_cols = params->video_num_cols;
+		video_x = params->video_x;
+		video_y = params->video_y;
+		bytes_per_char_h = params->bytes_per_char_h;
+		bytes_per_char_v = params->bytes_per_char_v;
+	}
+
+	video_size_row = video_num_cols * bytes_per_char_h;
+	
+	if (bytes_per_char_h == 4)
+		for (i = 0; i < 256; i++)
+			con_charconvtable[i] =
+				(i & 128 ? 1 << 0  : 0) |
+				(i & 64  ? 1 << 4  : 0) |
+				(i & 32  ? 1 << 8  : 0) |
+				(i & 16  ? 1 << 12 : 0) |
+				(i & 8   ? 1 << 16 : 0) |
+				(i & 4   ? 1 << 20 : 0) |
+				(i & 2   ? 1 << 24 : 0) |
+				(i & 1   ? 1 << 28 : 0);
+	else
+		for (i = 0; i < 16; i++)
+			con_charconvtable[i] =
+				(i & 8   ? 1 << 0  : 0) |
+				(i & 4   ? 1 << 8  : 0) |
+				(i & 2   ? 1 << 16 : 0) |
+				(i & 1   ? 1 << 24 : 0);
+
+
+	palette_setpixel(0);
+	if (bytes_per_char_h == 1) {
+		palette_write (0);
+		palette_write (0x00ffffff);
+		for (i = 2; i < 256; i++)
+			palette_write (0);
+		white = 1;
+	} else {
+		for (i = 0; i < 256; i++)
+			palette_write (i < 16 ? palette_4[i] : 0);
+		white = 7;
+	}
+
+	if (nr_pages * page_size < 4096*1024) error("<4M of mem\n");
+}
+#endif
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-rpc/include/mach/vmalloc.h b/arch/arm/mach-rpc/include/mach/vmalloc.h
new file mode 100644
index 0000000..9a96fd6
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 1997 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x1c000000)
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index 54a6c756..ce8470fea 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -22,7 +22,7 @@
 #include <asm/elf.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include <asm/domain.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-s3c2400/gpio.c b/arch/arm/mach-s3c2400/gpio.c
index 140fd25..148d0dd 100644
--- a/arch/arm/mach-s3c2400/gpio.c
+++ b/arch/arm/mach-s3c2400/gpio.c
@@ -25,11 +25,11 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 int s3c2400_gpio_getirq(unsigned int pin)
 {
diff --git a/arch/arm/mach-s3c2400/include/mach/map.h b/arch/arm/mach-s3c2400/include/mach/map.h
new file mode 100644
index 0000000..1535540
--- /dev/null
+++ b/arch/arm/mach-s3c2400/include/mach/map.h
@@ -0,0 +1,66 @@
+/* arch/arm/mach-s3c2400/include/mach/map.h
+ *
+ * Copyright 2003,2007  Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Copyright 2003, Lucas Correia Villa Real
+ *
+ * S3C2400 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C2400_PA_MEMCTRL	(0x14000000)
+#define S3C2400_PA_USBHOST	(0x14200000)
+#define S3C2400_PA_IRQ		(0x14400000)
+#define S3C2400_PA_DMA		(0x14600000)
+#define S3C2400_PA_CLKPWR	(0x14800000)
+#define S3C2400_PA_LCD		(0x14A00000)
+#define S3C2400_PA_UART		(0x15000000)
+#define S3C2400_PA_TIMER	(0x15100000)
+#define S3C2400_PA_USBDEV	(0x15200140)
+#define S3C2400_PA_WATCHDOG	(0x15300000)
+#define S3C2400_PA_IIC		(0x15400000)
+#define S3C2400_PA_IIS		(0x15508000)
+#define S3C2400_PA_GPIO		(0x15600000)
+#define S3C2400_PA_RTC		(0x15700040)
+#define S3C2400_PA_ADC		(0x15800000)
+#define S3C2400_PA_SPI		(0x15900000)
+
+#define S3C2400_PA_MMC		(0x15A00000)
+#define S3C2400_SZ_MMC		SZ_1M
+
+/* physical addresses of all the chip-select areas */
+
+#define S3C2400_CS0	(0x00000000)
+#define S3C2400_CS1	(0x02000000)
+#define S3C2400_CS2	(0x04000000)
+#define S3C2400_CS3	(0x06000000)
+#define S3C2400_CS4	(0x08000000)
+#define S3C2400_CS5	(0x0A000000)
+#define S3C2400_CS6	(0x0C000000)
+#define S3C2400_CS7	(0x0E000000)
+
+#define S3C2400_SDRAM_PA    (S3C2400_CS6)
+
+/* Use a single interface for common resources between S3C24XX cpus */
+
+#define S3C24XX_PA_IRQ		S3C2400_PA_IRQ
+#define S3C24XX_PA_MEMCTRL	S3C2400_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST	S3C2400_PA_USBHOST
+#define S3C24XX_PA_DMA		S3C2400_PA_DMA
+#define S3C24XX_PA_CLKPWR	S3C2400_PA_CLKPWR
+#define S3C24XX_PA_LCD		S3C2400_PA_LCD
+#define S3C24XX_PA_UART		S3C2400_PA_UART
+#define S3C24XX_PA_TIMER	S3C2400_PA_TIMER
+#define S3C24XX_PA_USBDEV	S3C2400_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG	S3C2400_PA_WATCHDOG
+#define S3C24XX_PA_IIC		S3C2400_PA_IIC
+#define S3C24XX_PA_IIS		S3C2400_PA_IIS
+#define S3C24XX_PA_GPIO		S3C2400_PA_GPIO
+#define S3C24XX_PA_RTC		S3C2400_PA_RTC
+#define S3C24XX_PA_ADC		S3C2400_PA_ADC
+#define S3C24XX_PA_SPI		S3C2400_PA_SPI
diff --git a/arch/arm/mach-s3c2400/include/mach/memory.h b/arch/arm/mach-s3c2400/include/mach/memory.h
new file mode 100644
index 0000000..8f4878e
--- /dev/null
+++ b/arch/arm/mach-s3c2400/include/mach/memory.h
@@ -0,0 +1,23 @@
+/* arch/arm/mach-s3c2400/include/mach/memory.h
+ *  from arch/arm/mach-rpc/include/mach/memory.h
+ *
+ *  Copyright 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET	UL(0x0C000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-s3c2410/bast-ide.c b/arch/arm/mach-s3c2410/bast-ide.c
index df95fe3..298ecec 100644
--- a/arch/arm/mach-s3c2410/bast-ide.c
+++ b/arch/arm/mach-s3c2410/bast-ide.c
@@ -24,9 +24,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/map.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
+#include <mach/map.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
 
 /* IDE ports */
 
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index 4e58bc0..c66021b 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -28,15 +28,15 @@
 
 #include <asm/mach-types.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
+#include <mach/regs-irq.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
 
 #include <asm/plat-s3c24xx/irq.h>
 
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index 4e62397..1322851 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -34,12 +34,12 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 8f12e85..8730797 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -18,17 +18,17 @@
 #include <linux/serial_core.h>
 
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/dma.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
 
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index d15621e..c6eefb1 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -26,11 +26,11 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
 			   unsigned int config)
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index affa4fa..5a6bc56 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -16,9 +16,9 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/h1940-latch.h>
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+#include <mach/h1940-latch.h>
 
 #define DRV_NAME              "h1940-bt"
 
diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h b/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
new file mode 100644
index 0000000..1b614d5
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
@@ -0,0 +1,25 @@
+/* arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
+ *
+ * Copyright (c) 2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * ANUBIS - CPLD control constants
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ANUBISCPLD_H
+#define __ASM_ARCH_ANUBISCPLD_H
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define ANUBIS_CTRL1_NANDSEL		(0x3)
+
+/* IDREG - revision */
+
+#define ANUBIS_IDREG_REVMASK		(0x7)
+
+#endif /* __ASM_ARCH_ANUBISCPLD_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-irq.h b/arch/arm/mach-s3c2410/include/mach/anubis-irq.h
new file mode 100644
index 0000000..a2a3281
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/anubis-irq.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-s3c2410/include/mach/anubis-irq.h
+ *
+ * Copyright (c) 2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *  ANUBIS - IRQ Number definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ANUBISIRQ_H
+#define __ASM_ARCH_ANUBISIRQ_H
+
+#define IRQ_IDE0       IRQ_EINT2
+#define IRQ_IDE1       IRQ_EINT3
+#define IRQ_ASIX       IRQ_EINT1
+
+#endif /* __ASM_ARCH_ANUBISIRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-map.h b/arch/arm/mach-s3c2410/include/mach/anubis-map.h
new file mode 100644
index 0000000..c9deb3a
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/anubis-map.h
@@ -0,0 +1,38 @@
+/* arch/arm/mach-s3c2410/include/mach/anubis-map.h
+ *
+ * Copyright (c) 2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * ANUBIS - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* needs arch/map.h including with this */
+
+#ifndef __ASM_ARCH_ANUBISMAP_H
+#define __ASM_ARCH_ANUBISMAP_H
+
+/* start peripherals off after the S3C2410 */
+
+#define ANUBIS_IOADDR(x)	(S3C2410_ADDR((x) + 0x01800000))
+
+#define ANUBIS_PA_CPLD		(S3C2410_CS1 | (1<<26))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define ANUBIS_VA_CTRL1	    ANUBIS_IOADDR(0x00000000)	 /* 0x01800000 */
+#define ANUBIS_PA_CTRL1	    (ANUBIS_PA_CPLD)
+
+#define ANUBIS_VA_IDREG	    ANUBIS_IOADDR(0x00300000)	 /* 0x01B00000 */
+#define ANUBIS_PA_IDREG	    (ANUBIS_PA_CPLD + (3<<23))
+
+#define ANUBIS_IDEPRI	    ANUBIS_IOADDR(0x01000000)
+#define ANUBIS_IDEPRIAUX    ANUBIS_IOADDR(0x01100000)
+#define ANUBIS_IDESEC	    ANUBIS_IOADDR(0x01200000)
+#define ANUBIS_IDESECAUX    ANUBIS_IOADDR(0x01300000)
+
+#endif /* __ASM_ARCH_ANUBISMAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/audio.h b/arch/arm/mach-s3c2410/include/mach/audio.h
new file mode 100644
index 0000000..de0e8da
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/audio.h
@@ -0,0 +1,45 @@
+/* arch/arm/mach-s3c2410/include/mach/audio.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/SWLINUX/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - Audio platfrom_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_AUDIO_H
+#define __ASM_ARCH_AUDIO_H __FILE__
+
+/* struct s3c24xx_iis_ops
+ *
+ * called from the s3c24xx audio core to deal with the architecture
+ * or the codec's setup and control.
+ *
+ * the pointer to itself is passed through in case the caller wants to
+ * embed this in an larger structure for easy reference to it's context.
+*/
+
+struct s3c24xx_iis_ops {
+	struct module *owner;
+
+	int	(*startup)(struct s3c24xx_iis_ops *me);
+	void	(*shutdown)(struct s3c24xx_iis_ops *me);
+	int	(*suspend)(struct s3c24xx_iis_ops *me);
+	int	(*resume)(struct s3c24xx_iis_ops *me);
+
+	int	(*open)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
+	int	(*close)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
+	int	(*prepare)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm, struct snd_pcm_runtime *rt);
+};
+
+struct s3c24xx_platdata_iis {
+	const char		*codec_clk;
+	struct s3c24xx_iis_ops	*ops;
+	int			(*match_dev)(struct device *dev);
+};
+
+#endif /* __ASM_ARCH_AUDIO_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
new file mode 100644
index 0000000..20493b0
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
@@ -0,0 +1,53 @@
+/* arch/arm/mach-s3c2410/include/mach/bast-cpld.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * BAST - CPLD control constants
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_BASTCPLD_H
+#define __ASM_ARCH_BASTCPLD_H
+
+/* CTRL1 - Audio LR routing */
+
+#define BAST_CPLD_CTRL1_LRCOFF	    (0x00)
+#define BAST_CPLD_CTRL1_LRCADC	    (0x01)
+#define BAST_CPLD_CTRL1_LRCDAC	    (0x02)
+#define BAST_CPLD_CTRL1_LRCARM	    (0x03)
+#define BAST_CPLD_CTRL1_LRMASK	    (0x03)
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define BAST_CPLD_CTRL2_WNAND       (0x04)
+#define BAST_CPLD_CTLR2_IDERST      (0x08)
+
+/* CTRL3 - rom write control, CPLD identity */
+
+#define BAST_CPLD_CTRL3_IDMASK      (0x0e)
+#define BAST_CPLD_CTRL3_ROMWEN      (0x01)
+
+/* CTRL4 - 8bit LCD interface control/status */
+
+#define BAST_CPLD_CTRL4_LLAT	    (0x01)
+#define BAST_CPLD_CTRL4_LCDRW	    (0x02)
+#define BAST_CPLD_CTRL4_LCDCMD	    (0x04)
+#define BAST_CPLD_CTRL4_LCDE2	    (0x01)
+
+/* CTRL5 - DMA routing */
+
+#define BAST_CPLD_DMA0_PRIIDE      (0<<0)
+#define BAST_CPLD_DMA0_SECIDE      (1<<0)
+#define BAST_CPLD_DMA0_ISA15       (2<<0)
+#define BAST_CPLD_DMA0_ISA36       (3<<0)
+
+#define BAST_CPLD_DMA1_PRIIDE      (0<<2)
+#define BAST_CPLD_DMA1_SECIDE      (1<<2)
+#define BAST_CPLD_DMA1_ISA15       (2<<2)
+#define BAST_CPLD_DMA1_ISA36       (3<<2)
+
+#endif /* __ASM_ARCH_BASTCPLD_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-irq.h b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
new file mode 100644
index 0000000..501c202b
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
@@ -0,0 +1,29 @@
+/* arch/arm/mach-s3c2410/include/mach/bast-irq.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine BAST - IRQ Number definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_BASTIRQ_H
+#define __ASM_ARCH_BASTIRQ_H
+
+/* irq numbers to onboard peripherals */
+
+#define IRQ_USBOC      IRQ_EINT18
+#define IRQ_IDE0       IRQ_EINT16
+#define IRQ_IDE1       IRQ_EINT17
+#define IRQ_PCSERIAL1  IRQ_EINT15
+#define IRQ_PCSERIAL2  IRQ_EINT14
+#define IRQ_PCPARALLEL IRQ_EINT13
+#define IRQ_ASIX       IRQ_EINT11
+#define IRQ_DM9000     IRQ_EINT10
+#define IRQ_ISA	       IRQ_EINT9
+#define IRQ_SMALERT    IRQ_EINT8
+
+#endif /* __ASM_ARCH_BASTIRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-map.h b/arch/arm/mach-s3c2410/include/mach/bast-map.h
new file mode 100644
index 0000000..c2c5baf
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/bast-map.h
@@ -0,0 +1,146 @@
+/* arch/arm/mach-s3c2410/include/mach/bast-map.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine BAST - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* needs arch/map.h including with this */
+
+/* ok, we've used up to 0x13000000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space. We also have the board's CPLD to find register space
+ * for.
+ */
+
+#ifndef __ASM_ARCH_BASTMAP_H
+#define __ASM_ARCH_BASTMAP_H
+
+#define BAST_IOADDR(x)	   (S3C2410_ADDR((x) + 0x01300000))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define BAST_VA_CTRL1	    BAST_IOADDR(0x00000000)	 /* 0x01300000 */
+#define BAST_PA_CTRL1	    (S3C2410_CS5 | 0x7800000)
+
+#define BAST_VA_CTRL2	    BAST_IOADDR(0x00100000)	 /* 0x01400000 */
+#define BAST_PA_CTRL2	    (S3C2410_CS1 | 0x6000000)
+
+#define BAST_VA_CTRL3	    BAST_IOADDR(0x00200000)	 /* 0x01500000 */
+#define BAST_PA_CTRL3	    (S3C2410_CS1 | 0x6800000)
+
+#define BAST_VA_CTRL4	    BAST_IOADDR(0x00300000)	 /* 0x01600000 */
+#define BAST_PA_CTRL4	    (S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define BAST_PA_PC104_IRQREQ  (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
+#define BAST_VA_PC104_IRQREQ  BAST_IOADDR(0x00400000)
+
+#define BAST_PA_PC104_IRQRAW  (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
+#define BAST_VA_PC104_IRQRAW  BAST_IOADDR(0x00500000)
+
+#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
+#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000)
+
+#define BAST_PA_LCD_RCMD1     (0x8800000)
+#define BAST_VA_LCD_RCMD1     BAST_IOADDR(0x00700000)
+
+#define BAST_PA_LCD_WCMD1     (0x8000000)
+#define BAST_VA_LCD_WCMD1     BAST_IOADDR(0x00800000)
+
+#define BAST_PA_LCD_RDATA1    (0x9800000)
+#define BAST_VA_LCD_RDATA1    BAST_IOADDR(0x00900000)
+
+#define BAST_PA_LCD_WDATA1    (0x9000000)
+#define BAST_VA_LCD_WDATA1    BAST_IOADDR(0x00A00000)
+
+#define BAST_PA_LCD_RCMD2     (0xA800000)
+#define BAST_VA_LCD_RCMD2     BAST_IOADDR(0x00B00000)
+
+#define BAST_PA_LCD_WCMD2     (0xA000000)
+#define BAST_VA_LCD_WCMD2     BAST_IOADDR(0x00C00000)
+
+#define BAST_PA_LCD_RDATA2    (0xB800000)
+#define BAST_VA_LCD_RDATA2    BAST_IOADDR(0x00D00000)
+
+#define BAST_PA_LCD_WDATA2    (0xB000000)
+#define BAST_VA_LCD_WDATA2    BAST_IOADDR(0x00E00000)
+
+
+/* 0xE0000000 contains the IO space that is split by speed and
+ * wether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000  8bit,  slow
+ * 0x04000000 to 0x08000000  16bit, slow
+ * 0x08000000 to 0x0C000000  16bit, net
+ * 0x0C000000 to 0x10000000  16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x00000000 to 0x01000000 16MB ISA IO space
+ * 0x01000000 to 0x02000000 16MB ISA memory space
+ * 0x02000000 to 0x02100000 1MB  IDE primary channel
+ * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB  IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
+ * 0x02400000 to 0x02500000 1MB  ASIX ethernet controller
+ * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controller
+ * 0x02600000 to 0x02700000 1MB  PC SuperIO controller
+ *
+ * the phyiscal layout of the zones are:
+ *  nGCS2 - 8bit, slow
+ *  nGCS3 - 16bit, slow
+ *  nGCS4 - 16bit, net
+ *  nGCS5 - 16bit, fast
+ */
+
+#define BAST_VA_MULTISPACE (0xE0000000)
+
+#define BAST_VA_ISAIO	   (BAST_VA_MULTISPACE + 0x00000000)
+#define BAST_VA_ISAMEM	   (BAST_VA_MULTISPACE + 0x01000000)
+#define BAST_VA_IDEPRI	   (BAST_VA_MULTISPACE + 0x02000000)
+#define BAST_VA_IDEPRIAUX  (BAST_VA_MULTISPACE + 0x02100000)
+#define BAST_VA_IDESEC	   (BAST_VA_MULTISPACE + 0x02200000)
+#define BAST_VA_IDESECAUX  (BAST_VA_MULTISPACE + 0x02300000)
+#define BAST_VA_ASIXNET	   (BAST_VA_MULTISPACE + 0x02400000)
+#define BAST_VA_DM9000	   (BAST_VA_MULTISPACE + 0x02500000)
+#define BAST_VA_SUPERIO	   (BAST_VA_MULTISPACE + 0x02600000)
+
+#define BAST_VA_MULTISPACE (0xE0000000)
+
+#define BAST_VAM_CS2 (0x00000000)
+#define BAST_VAM_CS3 (0x04000000)
+#define BAST_VAM_CS4 (0x08000000)
+#define BAST_VAM_CS5 (0x0C000000)
+
+/* physical offset addresses for the peripherals */
+
+#define BAST_PA_ISAIO	  (0x00000000)
+#define BAST_PA_ASIXNET	  (0x01000000)
+#define BAST_PA_SUPERIO	  (0x01800000)
+#define BAST_PA_IDEPRI	  (0x02000000)
+#define BAST_PA_IDEPRIAUX (0x02800000)
+#define BAST_PA_IDESEC	  (0x03000000)
+#define BAST_PA_IDESECAUX (0x03800000)
+#define BAST_PA_ISAMEM	  (0x04000000)
+#define BAST_PA_DM9000	  (0x05000000)
+
+/* some configurations for the peripherals */
+
+#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2)
+/*  */
+
+#define BAST_ASIXNET_CS  BAST_VAM_CS5
+#define BAST_IDE_CS	 BAST_VAM_CS5
+#define BAST_DM9000_CS	 BAST_VAM_CS4
+
+#endif /* __ASM_ARCH_BASTMAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
new file mode 100644
index 0000000..61684cb
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
@@ -0,0 +1,40 @@
+/* arch/arm/mach-s3c2410/include/mach/bast-pmu.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@simtec.co.uk>
+ *
+ * Machine BAST - Power Management chip
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_BASTPMU_H
+#define __ASM_ARCH_BASTPMU_H "08_OCT_2004"
+
+#define BASTPMU_REG_IDENT	(0x00)
+#define BASTPMU_REG_VERSION	(0x01)
+#define BASTPMU_REG_DDCCTRL	(0x02)
+#define BASTPMU_REG_POWER	(0x03)
+#define BASTPMU_REG_RESET	(0x04)
+#define BASTPMU_REG_GWO		(0x05)
+#define BASTPMU_REG_WOL		(0x06)
+#define BASTPMU_REG_WOR		(0x07)
+#define BASTPMU_REG_UID		(0x09)
+
+#define BASTPMU_EEPROM		(0xC0)
+
+#define BASTPMU_EEP_UID		(BASTPMU_EEPROM + 0)
+#define BASTPMU_EEP_WOL		(BASTPMU_EEPROM + 8)
+#define BASTPMU_EEP_WOR		(BASTPMU_EEPROM + 9)
+
+#define BASTPMU_IDENT_0		0x53
+#define BASTPMU_IDENT_1		0x42
+#define BASTPMU_IDENT_2		0x50
+#define BASTPMU_IDENT_3		0x4d
+
+#define BASTPMU_RESET_GUARD	(0x55)
+
+#endif /* __ASM_ARCH_BASTPMU_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
new file mode 100644
index 0000000..682df23
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -0,0 +1,102 @@
+/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Copyright (C) 2005 Simtec Electronics
+ *
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <asm/plat-s3c/regs-serial.h>
+
+#define S3C2410_UART1_OFF (0x4000)
+#define SHIFT_2440TXF (14-9)
+
+	.macro addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C24XX_PA_UART
+		ldrne	\rx, = S3C24XX_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+	.macro fifo_full_s3c24xx rd, rx
+		@ check for arm920 vs arm926. currently assume all arm926
+		@ devices have an 64 byte FIFO identical to the s3c2440
+		mrc	p15, 0, \rd, c0, c0
+		and	\rd, \rd, #0xff0
+		teq	\rd, #0x260
+		beq	1004f
+		mrc	p15, 0, \rd, c1, c0
+		tst	\rd, #1
+		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
+		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
+		bic	\rd, \rd, #0xff000
+		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+		and	\rd, \rd, #0x00ff0000
+		teq	\rd, #0x00440000		@ is it 2440?
+1004:
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		moveq	\rd, \rd, lsr #SHIFT_2440TXF
+		tst	\rd, #S3C2410_UFSTAT_TXFULL
+	.endm
+
+	.macro  fifo_full_s3c2410 rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		tst	\rd, #S3C2410_UFSTAT_TXFULL
+	.endm
+
+/* fifo level reading */
+
+	.macro fifo_level_s3c24xx rd, rx
+		@ check for arm920 vs arm926. currently assume all arm926
+		@ devices have an 64 byte FIFO identical to the s3c2440
+		mrc	p15, 0, \rd, c0, c0
+		and	\rd, \rd, #0xff0
+		teq	\rd, #0x260
+		beq	10000f
+		mrc	p15, 0, \rd, c1, c0
+		tst	\rd, #1
+		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
+		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
+		bic	\rd, \rd, #0xff000
+		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+		and	\rd, \rd, #0x00ff0000
+		teq	\rd, #0x00440000		@ is it 2440?
+
+10000:
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		andne	\rd, \rd, #S3C2410_UFSTAT_TXMASK
+		andeq	\rd, \rd, #S3C2440_UFSTAT_TXMASK
+	.endm
+
+	.macro fifo_level_s3c2410 rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
+	.endm
+
+/* Select the correct implementation depending on the configuration. The
+ * S3C2440 will get selected by default, as these are the most widely
+ * used variants of these
+*/
+
+#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY)
+#define fifo_full  fifo_full_s3c2410
+#define fifo_level fifo_level_s3c2410
+#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY)
+#define fifo_full  fifo_full_s3c24xx
+#define fifo_level fifo_level_s3c24xx
+#endif
+
+/* include the reset of the code which will do the work */
+
+#include <asm/plat-s3c/debug-macro.S>
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
new file mode 100644
index 0000000..891b53c
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -0,0 +1,453 @@
+/* arch/arm/mach-s3c2410/include/mach/dma.h
+ *
+ * Copyright (C) 2003,2004,2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C241XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+#include <linux/sysdev.h>
+#include <mach/hardware.h>
+
+/*
+ * This is the maximum DMA address(physical address) that can be DMAd to.
+ *
+ */
+#define MAX_DMA_ADDRESS		0x40000000
+#define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
+
+/* We use `virtual` dma channels to hide the fact we have only a limited
+ * number of DMA channels, and not of all of them (dependant on the device)
+ * can be attached to any DMA source. We therefore let the DMA core handle
+ * the allocation of hardware channels to clients.
+*/
+
+enum dma_ch {
+	DMACH_XD0,
+	DMACH_XD1,
+	DMACH_SDI,
+	DMACH_SPI0,
+	DMACH_SPI1,
+	DMACH_UART0,
+	DMACH_UART1,
+	DMACH_UART2,
+	DMACH_TIMER,
+	DMACH_I2S_IN,
+	DMACH_I2S_OUT,
+	DMACH_PCM_IN,
+	DMACH_PCM_OUT,
+	DMACH_MIC_IN,
+	DMACH_USB_EP1,
+	DMACH_USB_EP2,
+	DMACH_USB_EP3,
+	DMACH_USB_EP4,
+	DMACH_UART0_SRC2,	/* s3c2412 second uart sources */
+	DMACH_UART1_SRC2,
+	DMACH_UART2_SRC2,
+	DMACH_UART3,		/* s3c2443 has extra uart */
+	DMACH_UART3_SRC2,
+	DMACH_MAX,		/* the end entry */
+};
+
+#define DMACH_LOW_LEVEL	(1<<28)	/* use this to specifiy hardware ch no */
+
+/* we have 4 dma channels */
+#ifndef CONFIG_CPU_S3C2443
+#define S3C2410_DMA_CHANNELS		(4)
+#else
+#define S3C2410_DMA_CHANNELS		(6)
+#endif
+
+/* types */
+
+enum s3c2410_dma_state {
+	S3C2410_DMA_IDLE,
+	S3C2410_DMA_RUNNING,
+	S3C2410_DMA_PAUSED
+};
+
+
+/* enum s3c2410_dma_loadst
+ *
+ * This represents the state of the DMA engine, wrt to the loaded / running
+ * transfers. Since we don't have any way of knowing exactly the state of
+ * the DMA transfers, we need to know the state to make decisions on wether
+ * we can
+ *
+ * S3C2410_DMA_NONE
+ *
+ * There are no buffers loaded (the channel should be inactive)
+ *
+ * S3C2410_DMA_1LOADED
+ *
+ * There is one buffer loaded, however it has not been confirmed to be
+ * loaded by the DMA engine. This may be because the channel is not
+ * yet running, or the DMA driver decided that it was too costly to
+ * sit and wait for it to happen.
+ *
+ * S3C2410_DMA_1RUNNING
+ *
+ * The buffer has been confirmed running, and not finisged
+ *
+ * S3C2410_DMA_1LOADED_1RUNNING
+ *
+ * There is a buffer waiting to be loaded by the DMA engine, and one
+ * currently running.
+*/
+
+enum s3c2410_dma_loadst {
+	S3C2410_DMALOAD_NONE,
+	S3C2410_DMALOAD_1LOADED,
+	S3C2410_DMALOAD_1RUNNING,
+	S3C2410_DMALOAD_1LOADED_1RUNNING,
+};
+
+enum s3c2410_dma_buffresult {
+	S3C2410_RES_OK,
+	S3C2410_RES_ERR,
+	S3C2410_RES_ABORT
+};
+
+enum s3c2410_dmasrc {
+	S3C2410_DMASRC_HW,		/* source is memory */
+	S3C2410_DMASRC_MEM		/* source is hardware */
+};
+
+/* enum s3c2410_chan_op
+ *
+ * operation codes passed to the DMA code by the user, and also used
+ * to inform the current channel owner of any changes to the system state
+*/
+
+enum s3c2410_chan_op {
+	S3C2410_DMAOP_START,
+	S3C2410_DMAOP_STOP,
+	S3C2410_DMAOP_PAUSE,
+	S3C2410_DMAOP_RESUME,
+	S3C2410_DMAOP_FLUSH,
+	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
+	S3C2410_DMAOP_STARTED,		/* indicate channel started */
+};
+
+/* flags */
+
+#define S3C2410_DMAF_SLOW         (1<<0)   /* slow, so don't worry about
+					    * waiting for reloads */
+#define S3C2410_DMAF_AUTOSTART    (1<<1)   /* auto-start if buffer queued */
+
+/* dma buffer */
+
+struct s3c2410_dma_client {
+	char                *name;
+};
+
+/* s3c2410_dma_buf_s
+ *
+ * internally used buffer structure to describe a queued or running
+ * buffer.
+*/
+
+struct s3c2410_dma_buf;
+struct s3c2410_dma_buf {
+	struct s3c2410_dma_buf	*next;
+	int			 magic;		/* magic */
+	int			 size;		/* buffer size in bytes */
+	dma_addr_t		 data;		/* start of DMA data */
+	dma_addr_t		 ptr;		/* where the DMA got to [1] */
+	void			*id;		/* client's id */
+};
+
+/* [1] is this updated for both recv/send modes? */
+
+struct s3c2410_dma_chan;
+
+/* s3c2410_dma_cbfn_t
+ *
+ * buffer callback routine type
+*/
+
+typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
+				   void *buf, int size,
+				   enum s3c2410_dma_buffresult result);
+
+typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
+				   enum s3c2410_chan_op );
+
+struct s3c2410_dma_stats {
+	unsigned long		loads;
+	unsigned long		timeout_longest;
+	unsigned long		timeout_shortest;
+	unsigned long		timeout_avg;
+	unsigned long		timeout_failed;
+};
+
+struct s3c2410_dma_map;
+
+/* struct s3c2410_dma_chan
+ *
+ * full state information for each DMA channel
+*/
+
+struct s3c2410_dma_chan {
+	/* channel state flags and information */
+	unsigned char		 number;      /* number of this dma channel */
+	unsigned char		 in_use;      /* channel allocated */
+	unsigned char		 irq_claimed; /* irq claimed for channel */
+	unsigned char		 irq_enabled; /* irq enabled for channel */
+	unsigned char		 xfer_unit;   /* size of an transfer */
+
+	/* channel state */
+
+	enum s3c2410_dma_state	 state;
+	enum s3c2410_dma_loadst	 load_state;
+	struct s3c2410_dma_client *client;
+
+	/* channel configuration */
+	enum s3c2410_dmasrc	 source;
+	unsigned long		 dev_addr;
+	unsigned long		 load_timeout;
+	unsigned int		 flags;		/* channel flags */
+	unsigned int		 hw_cfg;	/* last hw config */
+
+	struct s3c24xx_dma_map	*map;		/* channel hw maps */
+
+	/* channel's hardware position and configuration */
+	void __iomem		*regs;		/* channels registers */
+	void __iomem		*addr_reg;	/* data address register */
+	unsigned int		 irq;		/* channel irq */
+	unsigned long		 dcon;		/* default value of DCON */
+
+	/* driver handles */
+	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
+	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
+
+	/* stats gathering */
+	struct s3c2410_dma_stats *stats;
+	struct s3c2410_dma_stats  stats_store;
+
+	/* buffer list and information */
+	struct s3c2410_dma_buf	*curr;		/* current dma buffer */
+	struct s3c2410_dma_buf	*next;		/* next buffer to load */
+	struct s3c2410_dma_buf	*end;		/* end of queue */
+
+	/* system device */
+	struct sys_device	dev;
+};
+
+/* the currently allocated channel information */
+extern struct s3c2410_dma_chan s3c2410_chans[];
+
+/* note, we don't really use dma_device_t at the moment */
+typedef unsigned long dma_device_t;
+
+/* functions --------------------------------------------------------------- */
+
+/* s3c2410_dma_request
+ *
+ * request a dma channel exclusivley
+*/
+
+extern int s3c2410_dma_request(dmach_t channel,
+			       struct s3c2410_dma_client *, void *dev);
+
+
+/* s3c2410_dma_ctrl
+ *
+ * change the state of the dma channel
+*/
+
+extern int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op);
+
+/* s3c2410_dma_setflags
+ *
+ * set the channel's flags to a given state
+*/
+
+extern int s3c2410_dma_setflags(dmach_t channel,
+				unsigned int flags);
+
+/* s3c2410_dma_free
+ *
+ * free the dma channel (will also abort any outstanding operations)
+*/
+
+extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *);
+
+/* s3c2410_dma_enqueue
+ *
+ * place the given buffer onto the queue of operations for the channel.
+ * The buffer must be allocated from dma coherent memory, or the Dcache/WB
+ * drained before the buffer is given to the DMA system.
+*/
+
+extern int s3c2410_dma_enqueue(dmach_t channel, void *id,
+			       dma_addr_t data, int size);
+
+/* s3c2410_dma_config
+ *
+ * configure the dma channel
+*/
+
+extern int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon);
+
+/* s3c2410_dma_devconfig
+ *
+ * configure the device we're talking to
+*/
+
+extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
+				 int hwcfg, unsigned long devaddr);
+
+/* s3c2410_dma_getposition
+ *
+ * get the position that the dma transfer is currently at
+*/
+
+extern int s3c2410_dma_getposition(dmach_t channel,
+				   dma_addr_t *src, dma_addr_t *dest);
+
+extern int s3c2410_dma_set_opfn(dmach_t, s3c2410_dma_opfn_t rtn);
+extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn);
+
+/* DMA Register definitions */
+
+#define S3C2410_DMA_DISRC       (0x00)
+#define S3C2410_DMA_DISRCC      (0x04)
+#define S3C2410_DMA_DIDST       (0x08)
+#define S3C2410_DMA_DIDSTC      (0x0C)
+#define S3C2410_DMA_DCON        (0x10)
+#define S3C2410_DMA_DSTAT       (0x14)
+#define S3C2410_DMA_DCSRC       (0x18)
+#define S3C2410_DMA_DCDST       (0x1C)
+#define S3C2410_DMA_DMASKTRIG   (0x20)
+#define S3C2412_DMA_DMAREQSEL	(0x24)
+#define S3C2443_DMA_DMAREQSEL	(0x24)
+
+#define S3C2410_DISRCC_INC	(1<<0)
+#define S3C2410_DISRCC_APB	(1<<1)
+
+#define S3C2410_DMASKTRIG_STOP   (1<<2)
+#define S3C2410_DMASKTRIG_ON     (1<<1)
+#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
+
+#define S3C2410_DCON_DEMAND     (0<<31)
+#define S3C2410_DCON_HANDSHAKE  (1<<31)
+#define S3C2410_DCON_SYNC_PCLK  (0<<30)
+#define S3C2410_DCON_SYNC_HCLK  (1<<30)
+
+#define S3C2410_DCON_INTREQ     (1<<29)
+
+#define S3C2410_DCON_CH0_XDREQ0	(0<<24)
+#define S3C2410_DCON_CH0_UART0	(1<<24)
+#define S3C2410_DCON_CH0_SDI	(2<<24)
+#define S3C2410_DCON_CH0_TIMER	(3<<24)
+#define S3C2410_DCON_CH0_USBEP1	(4<<24)
+
+#define S3C2410_DCON_CH1_XDREQ1	(0<<24)
+#define S3C2410_DCON_CH1_UART1	(1<<24)
+#define S3C2410_DCON_CH1_I2SSDI	(2<<24)
+#define S3C2410_DCON_CH1_SPI	(3<<24)
+#define S3C2410_DCON_CH1_USBEP2	(4<<24)
+
+#define S3C2410_DCON_CH2_I2SSDO	(0<<24)
+#define S3C2410_DCON_CH2_I2SSDI	(1<<24)
+#define S3C2410_DCON_CH2_SDI	(2<<24)
+#define S3C2410_DCON_CH2_TIMER	(3<<24)
+#define S3C2410_DCON_CH2_USBEP3	(4<<24)
+
+#define S3C2410_DCON_CH3_UART2	(0<<24)
+#define S3C2410_DCON_CH3_SDI	(1<<24)
+#define S3C2410_DCON_CH3_SPI	(2<<24)
+#define S3C2410_DCON_CH3_TIMER	(3<<24)
+#define S3C2410_DCON_CH3_USBEP4	(4<<24)
+
+#define S3C2410_DCON_SRCSHIFT   (24)
+#define S3C2410_DCON_SRCMASK	(7<<24)
+
+#define S3C2410_DCON_BYTE       (0<<20)
+#define S3C2410_DCON_HALFWORD   (1<<20)
+#define S3C2410_DCON_WORD       (2<<20)
+
+#define S3C2410_DCON_AUTORELOAD (0<<22)
+#define S3C2410_DCON_NORELOAD   (1<<22)
+#define S3C2410_DCON_HWTRIG     (1<<23)
+
+#ifdef CONFIG_CPU_S3C2440
+#define S3C2440_DIDSTC_CHKINT	(1<<2)
+
+#define S3C2440_DCON_CH0_I2SSDO	(5<<24)
+#define S3C2440_DCON_CH0_PCMIN	(6<<24)
+
+#define S3C2440_DCON_CH1_PCMOUT	(5<<24)
+#define S3C2440_DCON_CH1_SDI	(6<<24)
+
+#define S3C2440_DCON_CH2_PCMIN	(5<<24)
+#define S3C2440_DCON_CH2_MICIN	(6<<24)
+
+#define S3C2440_DCON_CH3_MICIN	(5<<24)
+#define S3C2440_DCON_CH3_PCMOUT	(6<<24)
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+
+#define S3C2412_DMAREQSEL_SRC(x)	((x)<<1)
+
+#define S3C2412_DMAREQSEL_HW		(1)
+
+#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
+#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
+#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
+#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
+#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
+#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
+#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
+#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
+#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
+#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
+#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
+#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
+#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
+#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
+#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
+#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
+#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
+#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
+#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
+#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
+
+#endif
+
+#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
+
+#define S3C2443_DMAREQSEL_HW		(1)
+
+#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
+#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
+#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
+#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
+#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
+#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
+#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
+#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
+#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
+#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
+#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
+#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
+#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
+#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
+#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
+#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
+#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
+#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
+#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
+#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
+#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/entry-macro.S b/arch/arm/mach-s3c2410/include/mach/entry-macro.S
new file mode 100644
index 0000000..473b3cd
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/entry-macro.S
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-s3c2410/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for S3C2410-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/* We have a problem that the INTOFFSET register does not always
+ * show one interrupt. Occasionally we get two interrupts through
+ * the prioritiser, and this causes the INTOFFSET register to show
+ * what looks like the logical-or of the two interrupt numbers.
+ *
+ * Thanks to Klaus, Shannon, et al for helping to debug this problem
+*/
+
+#define INTPND		(0x10)
+#define INTOFFSET	(0x14)
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+	.macro  get_irqnr_preamble, base, tmp
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		mov	\base, #S3C24XX_VA_IRQ
+
+		@@ try the interrupt offset register, since it is there
+
+		ldr	\irqstat, [ \base, #INTPND ]
+		teq	\irqstat, #0
+		beq	1002f
+		ldr	\irqnr, [ \base, #INTOFFSET ]
+		mov	\tmp, #1
+		tst	\irqstat, \tmp, lsl \irqnr
+		bne	1001f
+
+		@@ the number specified is not a valid irq, so try
+		@@ and work it out for ourselves
+
+		mov	\irqnr, #0		@@ start here
+
+		@@ work out which irq (if any) we got
+
+		movs	\tmp, \irqstat, lsl#16
+		addeq	\irqnr, \irqnr, #16
+		moveq	\irqstat, \irqstat, lsr#16
+		tst	\irqstat, #0xff
+		addeq	\irqnr, \irqnr, #8
+		moveq	\irqstat, \irqstat, lsr#8
+		tst	\irqstat, #0xf
+		addeq	\irqnr, \irqnr, #4
+		moveq	\irqstat, \irqstat, lsr#4
+		tst	\irqstat, #0x3
+		addeq	\irqnr, \irqnr, #2
+		moveq	\irqstat, \irqstat, lsr#2
+		tst	\irqstat, #0x1
+		addeq	\irqnr, \irqnr, #1
+
+		@@ we have the value
+1001:
+		adds	\irqnr, \irqnr, #IRQ_EINT0
+1002:
+		@@ exit here, Z flag unset if IRQ
+
+	.endm
+
+		/* currently don't need an disable_fiq macro */
+
+		.macro	disable_fiq
+		.endm
diff --git a/arch/arm/mach-s3c2410/include/mach/fb.h b/arch/arm/mach-s3c2410/include/mach/fb.h
new file mode 100644
index 0000000..eee0654
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/fb.h
@@ -0,0 +1,74 @@
+/* arch/arm/mach-s3c2410/include/mach/fb.h
+ *
+ * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * Inspired by pxafb.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_FB_H
+#define __ASM_ARM_FB_H
+
+#include <mach/regs-lcd.h>
+
+struct s3c2410fb_hw {
+	unsigned long	lcdcon1;
+	unsigned long	lcdcon2;
+	unsigned long	lcdcon3;
+	unsigned long	lcdcon4;
+	unsigned long	lcdcon5;
+};
+
+/* LCD description */
+struct s3c2410fb_display {
+	/* LCD type */
+	unsigned type;
+
+	/* Screen size */
+	unsigned short width;
+	unsigned short height;
+
+	/* Screen info */
+	unsigned short xres;
+	unsigned short yres;
+	unsigned short bpp;
+
+	unsigned pixclock;		/* pixclock in picoseconds */
+	unsigned short left_margin;  /* value in pixels (TFT) or HCLKs (STN) */
+	unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
+	unsigned short hsync_len;    /* value in pixels (TFT) or HCLKs (STN) */
+	unsigned short upper_margin;	/* value in lines (TFT) or 0 (STN) */
+	unsigned short lower_margin;	/* value in lines (TFT) or 0 (STN) */
+	unsigned short vsync_len;	/* value in lines (TFT) or 0 (STN) */
+
+	/* lcd configuration registers */
+	unsigned long	lcdcon5;
+};
+
+struct s3c2410fb_mach_info {
+
+	struct s3c2410fb_display *displays;	/* attached diplays info */
+	unsigned num_displays;			/* number of defined displays */
+	unsigned default_display;
+
+	/* GPIOs */
+
+	unsigned long	gpcup;
+	unsigned long	gpcup_mask;
+	unsigned long	gpccon;
+	unsigned long	gpccon_mask;
+	unsigned long	gpdup;
+	unsigned long	gpdup_mask;
+	unsigned long	gpdcon;
+	unsigned long	gpdcon_mask;
+
+	/* lpc3600 control register */
+	unsigned long	lpcsel;
+};
+
+extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
+
+#endif /* __ASM_ARM_FB_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
new file mode 100644
index 0000000..3b52b86
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s3c2410/include/mach/gpio.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
new file mode 100644
index 0000000..d8a8327
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
@@ -0,0 +1,64 @@
+/* arch/arm/mach-s3c2410/include/mach/h1940-latch.h
+ *
+ * Copyright (c) 2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *  iPAQ H1940 series - latch definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_H1940_LATCH_H
+#define __ASM_ARCH_H1940_LATCH_H
+
+
+#ifndef __ASSEMBLY__
+#define H1940_LATCH		((void __force __iomem *)0xF8000000)
+#else
+#define H1940_LATCH		0xF8000000
+#endif
+
+#define H1940_PA_LATCH		(S3C2410_CS2)
+
+/* SD layer latch */
+
+#define H1940_LATCH_SDQ1		(1<<16)
+#define H1940_LATCH_LCD_P1		(1<<17)
+#define H1940_LATCH_LCD_P2		(1<<18)
+#define H1940_LATCH_LCD_P3		(1<<19)
+#define H1940_LATCH_MAX1698_nSHUTDOWN	(1<<20)		/* LCD backlight */
+#define H1940_LATCH_LED_RED		(1<<21)
+#define H1940_LATCH_SDQ7		(1<<22)
+#define H1940_LATCH_USB_DP		(1<<23)
+
+/* CPU layer latch */
+
+#define H1940_LATCH_UDA_POWER		(1<<24)
+#define H1940_LATCH_AUDIO_POWER		(1<<25)
+#define H1940_LATCH_SM803_ENABLE	(1<<26)
+#define H1940_LATCH_LCD_P4		(1<<27)
+#define H1940_LATCH_CPUQ5		(1<<28)		/* untraced */
+#define H1940_LATCH_BLUETOOTH_POWER	(1<<29)		/* active high */
+#define H1940_LATCH_LED_GREEN		(1<<30)
+#define H1940_LATCH_LED_FLASH		(1<<31)
+
+/* default settings */
+
+#define H1940_LATCH_DEFAULT		\
+	H1940_LATCH_LCD_P4		| \
+	H1940_LATCH_SM803_ENABLE	| \
+	H1940_LATCH_SDQ1		| \
+	H1940_LATCH_LCD_P1		| \
+	H1940_LATCH_LCD_P2		| \
+	H1940_LATCH_LCD_P3		| \
+	H1940_LATCH_MAX1698_nSHUTDOWN   | \
+	H1940_LATCH_CPUQ5
+
+/* control functions */
+
+extern void h1940_latch_control(unsigned int clear, unsigned int set);
+
+#endif /* __ASM_ARCH_H1940_LATCH_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/h1940.h b/arch/arm/mach-s3c2410/include/mach/h1940.h
new file mode 100644
index 0000000..4559784
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/h1940.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-s3c2410/include/mach/h1940.h
+ *
+ * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
+ *
+ * H1940 definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_H1940_H
+#define __ASM_ARCH_H1940_H
+
+#define H1940_SUSPEND_CHECKSUM		(0x30003ff8)
+#define H1940_SUSPEND_RESUMEAT		(0x30081000)
+#define H1940_SUSPEND_CHECK		(0x30080000)
+
+extern void h1940_pm_return(void);
+
+#endif /* __ASM_ARCH_H1940_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/hardware.h b/arch/arm/mach-s3c2410/include/mach/hardware.h
new file mode 100644
index 0000000..74d5a1a
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/hardware.h
@@ -0,0 +1,137 @@
+/* arch/arm/mach-s3c2410/include/mach/hardware.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#ifndef __ASSEMBLY__
+
+/* external functions for GPIO support
+ *
+ * These allow various different clients to access the same GPIO
+ * registers without conflicting. If your driver only owns the entire
+ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
+*/
+
+/* s3c2410_gpio_cfgpin
+ *
+ * set the configuration of the given pin to the value passed.
+ *
+ * eg:
+ *    s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
+ *    s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+*/
+
+extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
+
+extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
+
+/* s3c2410_gpio_getirq
+ *
+ * turn the given pin number into the corresponding IRQ number
+ *
+ * returns:
+ *	< 0 = no interrupt for this pin
+ *	>=0 = interrupt number for the pin
+*/
+
+extern int s3c2410_gpio_getirq(unsigned int pin);
+
+/* s3c2410_gpio_irq2pin
+ *
+ * turn the given irq number into the corresponding GPIO number
+ *
+ * returns:
+ *	< 0 = no pin
+ *	>=0 = gpio pin number
+*/
+
+extern int s3c2410_gpio_irq2pin(unsigned int irq);
+
+#ifdef CONFIG_CPU_S3C2400
+
+extern int s3c2400_gpio_getirq(unsigned int pin);
+
+#endif /* CONFIG_CPU_S3C2400 */
+
+/* s3c2410_gpio_irqfilter
+ *
+ * set the irq filtering on the given pin
+ *
+ * on = 0 => disable filtering
+ *      1 => enable filtering
+ *
+ * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
+ *          width of filter (0 through 63)
+ *
+ *
+*/
+
+extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+				  unsigned int config);
+
+/* s3c2410_gpio_pullup
+ *
+ * configure the pull-up control on the given pin
+ *
+ * to = 1 => disable the pull-up
+ *      0 => enable the pull-up
+ *
+ * eg;
+ *
+ *   s3c2410_gpio_pullup(S3C2410_GPB0, 0);
+ *   s3c2410_gpio_pullup(S3C2410_GPE8, 0);
+*/
+
+extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+
+/* s3c2410_gpio_getpull
+ *
+ * Read the state of the pull-up on a given pin
+ *
+ * return:
+ *	< 0 => error code
+ *	  0 => enabled
+ *	  1 => disabled
+*/
+
+extern int s3c2410_gpio_getpull(unsigned int pin);
+
+extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+
+extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
+
+extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
+
+#ifdef CONFIG_CPU_S3C2440
+
+extern int s3c2440_set_dsc(unsigned int pin, unsigned int value);
+
+#endif /* CONFIG_CPU_S3C2440 */
+
+#ifdef CONFIG_CPU_S3C2412
+
+extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
+
+#endif /* CONFIG_CPU_S3C2412 */
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm/sizes.h>
+#include <mach/map.h>
+
+/* machine specific hardware definitions should go after this */
+
+/* currently here until moved into config (todo) */
+#define CONFIG_NO_MULTIWORD_IO
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/idle.h b/arch/arm/mach-s3c2410/include/mach/idle.h
new file mode 100644
index 0000000..e9ddd70
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/idle.h
@@ -0,0 +1,24 @@
+/* arch/arm/mach-s3c2410/include/mach/idle.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 CPU Idle controls
+*/
+
+#ifndef __ASM_ARCH_IDLE_H
+#define __ASM_ARCH_IDLE_H __FILE__
+
+/* This allows the over-ride of the default idle code, in case there
+ * is any other things to be done over idle (like DVS)
+*/
+
+extern void (*s3c24xx_idle)(void);
+
+extern void s3c24xx_default_idle(void);
+
+#endif /* __ASM_ARCH_IDLE_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/io.h b/arch/arm/mach-s3c2410/include/mach/io.h
new file mode 100644
index 0000000..9813dbf
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/io.h
@@ -0,0 +1,218 @@
+/*
+ * arch/arm/mach-s3c2410/include/mach/io.h
+ *  from arch/arm/mach-rpc/include/mach/io.h
+ *
+ * Copyright (C) 1997 Russell King
+ *	     (C) 2003 Simtec Electronics
+*/
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses.  PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1.  ARM addresses are above A28
+ * and are translated to the start of IO.  Note that all addresses are
+ * not shifted left!
+ */
+
+#define __PORT_PCIO(x)	((x) < (1<<28))
+
+#define PCIO_BASE	 (S3C24XX_VA_ISA_WORD)
+#define PCIO_BASE_b	 (S3C24XX_VA_ISA_BYTE)
+#define PCIO_BASE_w	 (S3C24XX_VA_ISA_WORD)
+#define PCIO_BASE_l	 (S3C24XX_VA_ISA_WORD)
+/*
+ * Dynamic IO functions - let the compiler
+ * optimize the expressions
+ */
+
+#define DECLARE_DYN_OUT(sz,fnsuffix,instr) \
+static inline void __out##fnsuffix (unsigned int val, unsigned int port) \
+{ \
+	unsigned long temp;				      \
+	__asm__ __volatile__(				      \
+	"cmp	%2, #(1<<28)\n\t"			      \
+	"mov	%0, %2\n\t"				      \
+	"addcc	%0, %0, %3\n\t"				      \
+	"str" instr " %1, [%0, #0 ]	@ out" #fnsuffix      \
+	: "=&r" (temp)					      \
+	: "r" (val), "r" (port), "Ir" (PCIO_BASE_##fnsuffix)  \
+	: "cc");					      \
+}
+
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr)				\
+static inline unsigned sz __in##fnsuffix (unsigned int port)		\
+{									\
+	unsigned long temp, value;					\
+	__asm__ __volatile__(						\
+	"cmp	%2, #(1<<28)\n\t"					\
+	"mov	%0, %2\n\t"						\
+	"addcc	%0, %0, %3\n\t"						\
+	"ldr" instr "	%1, [%0, #0 ]	@ in" #fnsuffix		\
+	: "=&r" (temp), "=r" (value)					\
+	: "r" (port), "Ir" (PCIO_BASE_##fnsuffix)	\
+	: "cc");							\
+	return (unsigned sz)value;					\
+}
+
+static inline void __iomem *__ioaddr (unsigned long port)
+{
+	return __PORT_PCIO(port) ? (PCIO_BASE + port) : (void __iomem *)port;
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr)	\
+	DECLARE_DYN_IN(sz,fnsuffix,instr) \
+	DECLARE_DYN_OUT(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"h")
+DECLARE_IO(int,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port)						\
+({									\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"strb	%0, [%1, %2]	@ outbc"			\
+		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"strb	%0, [%1, #0]	@ outbc"			\
+		: : "r" (value), "r" ((port)));				\
+})
+
+#define __inbc(port)							\
+({									\
+	unsigned char result;						\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"ldrb	%0, [%1, %2]	@ inbc"				\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"ldrb	%0, [%1, #0]	@ inbc"				\
+		: "=r" (result) : "r" ((port)));			\
+	result;								\
+})
+
+#define __outwc(value,port)						\
+({									\
+	unsigned long v = value;					\
+	if (__PORT_PCIO((port))) {					\
+		if ((port) < 256 && (port) > -256)			\
+			__asm__ __volatile__(				\
+			"strh	%0, [%1, %2]	@ outwc"		\
+			: : "r" (v), "r" (PCIO_BASE), "Jr" ((port)));	\
+		else if ((port) > 0)					\
+			__asm__ __volatile__(				\
+			"strh	%0, [%1, %2]	@ outwc"		\
+			: : "r" (v),					\
+			    "r" (PCIO_BASE + ((port) & ~0xff)),		\
+			     "Jr" (((port) & 0xff)));			\
+		else							\
+			__asm__ __volatile__(				\
+			"strh	%0, [%1, #0]	@ outwc"		\
+			: : "r" (v),					\
+			    "r" (PCIO_BASE + (port)));			\
+	} else								\
+		__asm__ __volatile__(					\
+		"strh	%0, [%1, #0]	@ outwc"			\
+		: : "r" (v), "r" ((port)));				\
+})
+
+#define __inwc(port)							\
+({									\
+	unsigned short result;						\
+	if (__PORT_PCIO((port))) {					\
+		if ((port) < 256 && (port) > -256 )			\
+			__asm__ __volatile__(				\
+			"ldrh	%0, [%1, %2]	@ inwc"			\
+			: "=r" (result)					\
+			: "r" (PCIO_BASE),				\
+			  "Jr" ((port)));				\
+		else if ((port) > 0)					\
+			__asm__ __volatile__(				\
+			"ldrh	%0, [%1, %2]	@ inwc"			\
+			: "=r" (result)					\
+			: "r" (PCIO_BASE + ((port) & ~0xff)),		\
+			  "Jr" (((port) & 0xff)));			\
+		else							\
+			__asm__ __volatile__(				\
+			"ldrh	%0, [%1, #0]	@ inwc"			\
+			: "=r" (result)					\
+			: "r" (PCIO_BASE + ((port))));			\
+	} else								\
+		__asm__ __volatile__(					\
+		"ldrh	%0, [%1, #0]	@ inwc"				\
+		: "=r" (result) : "r" ((port)));			\
+	result;								\
+})
+
+#define __outlc(value,port)						\
+({									\
+	unsigned long v = value;					\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"str	%0, [%1, %2]	@ outlc"			\
+		: : "r" (v), "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"str	%0, [%1, #0]	@ outlc"			\
+		: : "r" (v), "r" ((port)));		\
+})
+
+#define __inlc(port)							\
+({									\
+	unsigned long result;						\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"ldr	%0, [%1, %2]	@ inlc"				\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"ldr	%0, [%1, #0]	@ inlc"				\
+		: "=r" (result) : "r" ((port)));		\
+	result;								\
+})
+
+#define __ioaddrc(port)	((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port)))
+
+#define inb(p)		(__builtin_constant_p((p)) ? __inbc(p)	   : __inb(p))
+#define inw(p)		(__builtin_constant_p((p)) ? __inwc(p)	   : __inw(p))
+#define inl(p)		(__builtin_constant_p((p)) ? __inlc(p)	   : __inl(p))
+#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
+/* the following macro is deprecated */
+#define ioaddr(port)	__ioaddr((port))
+
+#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
+#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
+#define insl(p,d,l)	__raw_readsl(__ioaddr(p),d,l)
+
+#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
+#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
+#define outsl(p,d,l)	__raw_writesl(__ioaddr(p),d,l)
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+#define __mem_pci(x)	(x)
+
+#endif
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
new file mode 100644
index 0000000..950c71b
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -0,0 +1,166 @@
+/* arch/arm/mach-s3c2410/include/mach/irqs.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#ifndef __ASM_ARM_IRQ_H
+#error "Do not include this directly, instead #include <asm/irq.h>"
+#endif
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ */
+
+#define S3C2410_CPUIRQ_OFFSET	 (16)
+
+#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET)
+
+/* main cpu interrupts */
+#define IRQ_EINT0      S3C2410_IRQ(0)	    /* 16 */
+#define IRQ_EINT1      S3C2410_IRQ(1)
+#define IRQ_EINT2      S3C2410_IRQ(2)
+#define IRQ_EINT3      S3C2410_IRQ(3)
+#define IRQ_EINT4t7    S3C2410_IRQ(4)	    /* 20 */
+#define IRQ_EINT8t23   S3C2410_IRQ(5)
+#define IRQ_RESERVED6  S3C2410_IRQ(6)	    /* for s3c2410 */
+#define IRQ_CAM        S3C2410_IRQ(6)	    /* for s3c2440,s3c2443 */
+#define IRQ_BATT_FLT   S3C2410_IRQ(7)
+#define IRQ_TICK       S3C2410_IRQ(8)	    /* 24 */
+#define IRQ_WDT	       S3C2410_IRQ(9)	    /* WDT/AC97 for s3c2443 */
+#define IRQ_TIMER0     S3C2410_IRQ(10)
+#define IRQ_TIMER1     S3C2410_IRQ(11)
+#define IRQ_TIMER2     S3C2410_IRQ(12)
+#define IRQ_TIMER3     S3C2410_IRQ(13)
+#define IRQ_TIMER4     S3C2410_IRQ(14)
+#define IRQ_UART2      S3C2410_IRQ(15)
+#define IRQ_LCD	       S3C2410_IRQ(16)	    /* 32 */
+#define IRQ_DMA0       S3C2410_IRQ(17)	    /* IRQ_DMA for s3c2443 */
+#define IRQ_DMA1       S3C2410_IRQ(18)
+#define IRQ_DMA2       S3C2410_IRQ(19)
+#define IRQ_DMA3       S3C2410_IRQ(20)
+#define IRQ_SDI	       S3C2410_IRQ(21)
+#define IRQ_SPI0       S3C2410_IRQ(22)
+#define IRQ_UART1      S3C2410_IRQ(23)
+#define IRQ_RESERVED24 S3C2410_IRQ(24)	    /* 40 */
+#define IRQ_NFCON      S3C2410_IRQ(24)	    /* for s3c2440 */
+#define IRQ_USBD       S3C2410_IRQ(25)
+#define IRQ_USBH       S3C2410_IRQ(26)
+#define IRQ_IIC	       S3C2410_IRQ(27)
+#define IRQ_UART0      S3C2410_IRQ(28)	    /* 44 */
+#define IRQ_SPI1       S3C2410_IRQ(29)
+#define IRQ_RTC	       S3C2410_IRQ(30)
+#define IRQ_ADCPARENT  S3C2410_IRQ(31)
+
+/* interrupts generated from the external interrupts sources */
+#define IRQ_EINT4      S3C2410_IRQ(32)	   /* 48 */
+#define IRQ_EINT5      S3C2410_IRQ(33)
+#define IRQ_EINT6      S3C2410_IRQ(34)
+#define IRQ_EINT7      S3C2410_IRQ(35)
+#define IRQ_EINT8      S3C2410_IRQ(36)
+#define IRQ_EINT9      S3C2410_IRQ(37)
+#define IRQ_EINT10     S3C2410_IRQ(38)
+#define IRQ_EINT11     S3C2410_IRQ(39)
+#define IRQ_EINT12     S3C2410_IRQ(40)
+#define IRQ_EINT13     S3C2410_IRQ(41)
+#define IRQ_EINT14     S3C2410_IRQ(42)
+#define IRQ_EINT15     S3C2410_IRQ(43)
+#define IRQ_EINT16     S3C2410_IRQ(44)
+#define IRQ_EINT17     S3C2410_IRQ(45)
+#define IRQ_EINT18     S3C2410_IRQ(46)
+#define IRQ_EINT19     S3C2410_IRQ(47)
+#define IRQ_EINT20     S3C2410_IRQ(48)	   /* 64 */
+#define IRQ_EINT21     S3C2410_IRQ(49)
+#define IRQ_EINT22     S3C2410_IRQ(50)
+#define IRQ_EINT23     S3C2410_IRQ(51)
+
+
+#define IRQ_EINT(x)    (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
+
+#define IRQ_LCD_FIFO   S3C2410_IRQ(52)
+#define IRQ_LCD_FRAME  S3C2410_IRQ(53)
+
+/* IRQs for the interal UARTs, and ADC
+ * these need to be ordered in number of appearance in the
+ * SUBSRC mask register
+*/
+
+#define S3C2410_IRQSUB(x)	S3C2410_IRQ((x)+54)
+
+#define IRQ_S3CUART_RX0		S3C2410_IRQSUB(0)	/* 70 */
+#define IRQ_S3CUART_TX0		S3C2410_IRQSUB(1)
+#define IRQ_S3CUART_ERR0	S3C2410_IRQSUB(2)
+
+#define IRQ_S3CUART_RX1		S3C2410_IRQSUB(3)	/* 73 */
+#define IRQ_S3CUART_TX1		S3C2410_IRQSUB(4)
+#define IRQ_S3CUART_ERR1	S3C2410_IRQSUB(5)
+
+#define IRQ_S3CUART_RX2		S3C2410_IRQSUB(6)	/* 76 */
+#define IRQ_S3CUART_TX2		S3C2410_IRQSUB(7)
+#define IRQ_S3CUART_ERR2	S3C2410_IRQSUB(8)
+
+#define IRQ_TC			S3C2410_IRQSUB(9)
+#define IRQ_ADC			S3C2410_IRQSUB(10)
+
+/* extra irqs for s3c2412 */
+
+#define IRQ_S3C2412_CFSDI	S3C2410_IRQ(21)
+
+#define IRQ_S3C2412_SDI		S3C2410_IRQSUB(13)
+#define IRQ_S3C2412_CF		S3C2410_IRQSUB(14)
+
+/* extra irqs for s3c2440 */
+
+#define IRQ_S3C2440_CAM_C	S3C2410_IRQSUB(11)	/* S3C2443 too */
+#define IRQ_S3C2440_CAM_P	S3C2410_IRQSUB(12)	/* S3C2443 too */
+#define IRQ_S3C2440_WDT		S3C2410_IRQSUB(13)
+#define IRQ_S3C2440_AC97	S3C2410_IRQSUB(14)
+
+/* irqs for s3c2443 */
+
+#define IRQ_S3C2443_DMA		S3C2410_IRQ(17)		/* IRQ_DMA1 */
+#define IRQ_S3C2443_UART3	S3C2410_IRQ(18)		/* IRQ_DMA2 */
+#define IRQ_S3C2443_CFCON	S3C2410_IRQ(19)		/* IRQ_DMA3 */
+#define IRQ_S3C2443_HSMMC	S3C2410_IRQ(20)		/* IRQ_SDI */
+#define IRQ_S3C2443_NAND	S3C2410_IRQ(24)		/* reserved */
+
+#define IRQ_S3C2443_LCD1	S3C2410_IRQSUB(14)
+#define IRQ_S3C2443_LCD2	S3C2410_IRQSUB(15)
+#define IRQ_S3C2443_LCD3	S3C2410_IRQSUB(16)
+#define IRQ_S3C2443_LCD4	S3C2410_IRQSUB(17)
+
+#define IRQ_S3C2443_DMA0	S3C2410_IRQSUB(18)
+#define IRQ_S3C2443_DMA1	S3C2410_IRQSUB(19)
+#define IRQ_S3C2443_DMA2	S3C2410_IRQSUB(20)
+#define IRQ_S3C2443_DMA3	S3C2410_IRQSUB(21)
+#define IRQ_S3C2443_DMA4	S3C2410_IRQSUB(22)
+#define IRQ_S3C2443_DMA5	S3C2410_IRQSUB(23)
+
+/* UART3 */
+#define IRQ_S3C2443_RX3		S3C2410_IRQSUB(24)
+#define IRQ_S3C2443_TX3		S3C2410_IRQSUB(25)
+#define IRQ_S3C2443_ERR3	S3C2410_IRQSUB(26)
+
+#define IRQ_S3C2443_WDT		S3C2410_IRQSUB(27)
+#define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
+
+#ifdef CONFIG_CPU_S3C2443
+#define NR_IRQS (IRQ_S3C2443_AC97+1)
+#else
+#define NR_IRQS (IRQ_S3C2440_AC97+1)
+#endif
+
+/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
+#define FIQ_START		IRQ_EINT0
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/leds-gpio.h b/arch/arm/mach-s3c2410/include/mach/leds-gpio.h
new file mode 100644
index 0000000..d8a7672
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/leds-gpio.h
@@ -0,0 +1,28 @@
+/* arch/arm/mach-s3c2410/include/mach/leds-gpio.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - LEDs GPIO connector
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_LEDSGPIO_H
+#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h"
+
+#define S3C24XX_LEDF_ACTLOW	(1<<0)		/* LED is on when GPIO low */
+#define S3C24XX_LEDF_TRISTATE	(1<<1)		/* tristate to turn off */
+
+struct s3c24xx_led_platdata {
+	unsigned int		 gpio;
+	unsigned int		 flags;
+
+	char			*name;
+	char			*def_trigger;
+};
+
+#endif /* __ASM_ARCH_LEDSGPIO_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
new file mode 100644
index 0000000..64bf7e9
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -0,0 +1,178 @@
+/* arch/arm/mach-s3c2410/include/mach/map.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H
+
+#include <asm/plat-s3c/map.h>
+
+#define S3C2410_ADDR(x)		S3C_ADDR(x)
+
+/* interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C24XX_VA_IRQ	   S3C_VA_IRQ
+#define S3C2410_PA_IRQ	   (0x4A000000)
+#define S3C24XX_SZ_IRQ	   SZ_1M
+
+/* memory controller registers */
+#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
+#define S3C2410_PA_MEMCTRL (0x48000000)
+#define S3C24XX_SZ_MEMCTRL SZ_1M
+
+/* USB host controller */
+#define S3C2410_PA_USBHOST (0x49000000)
+#define S3C24XX_SZ_USBHOST SZ_1M
+
+/* DMA controller */
+#define S3C2410_PA_DMA	   (0x4B000000)
+#define S3C24XX_SZ_DMA	   SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_VA_CLKPWR  S3C_VA_SYS
+#define S3C2410_PA_CLKPWR  (0x4C000000)
+#define S3C24XX_SZ_CLKPWR  SZ_1M
+
+/* LCD controller */
+#define S3C2410_PA_LCD	   (0x4D000000)
+#define S3C24XX_SZ_LCD	   SZ_1M
+
+/* NAND flash controller */
+#define S3C2410_PA_NAND	   (0x4E000000)
+#define S3C24XX_SZ_NAND	   SZ_1M
+
+/* UARTs */
+#define S3C24XX_VA_UART	   S3C_VA_UART
+#define S3C2410_PA_UART	   (0x50000000)
+#define S3C24XX_SZ_UART	   SZ_1M
+
+/* Timers */
+#define S3C24XX_VA_TIMER   S3C_VA_TIMER
+#define S3C2410_PA_TIMER   (0x51000000)
+#define S3C24XX_SZ_TIMER   SZ_1M
+
+/* USB Device port */
+#define S3C2410_PA_USBDEV  (0x52000000)
+#define S3C24XX_SZ_USBDEV  SZ_1M
+
+/* Watchdog */
+#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
+#define S3C2410_PA_WATCHDOG (0x53000000)
+#define S3C24XX_SZ_WATCHDOG SZ_1M
+
+/* IIC hardware controller */
+#define S3C2410_PA_IIC	   (0x54000000)
+#define S3C24XX_SZ_IIC	   SZ_1M
+
+/* IIS controller */
+#define S3C2410_PA_IIS	   (0x55000000)
+#define S3C24XX_SZ_IIS	   SZ_1M
+
+/* GPIO ports */
+
+/* the calculation for the VA of this must ensure that
+ * it is the same distance apart from the UART in the
+ * phsyical address space, as the initial mapping for the IO
+ * is done as a 1:1 maping. This puts it (currently) at
+ * 0xFA800000, which is not in the way of any current mapping
+ * by the base system.
+*/
+
+#define S3C2410_PA_GPIO	   (0x56000000)
+#define S3C24XX_VA_GPIO	   ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
+#define S3C24XX_SZ_GPIO	   SZ_1M
+
+/* RTC */
+#define S3C2410_PA_RTC	   (0x57000000)
+#define S3C24XX_SZ_RTC	   SZ_1M
+
+/* ADC */
+#define S3C2410_PA_ADC	   (0x58000000)
+#define S3C24XX_SZ_ADC	   SZ_1M
+
+/* SPI */
+#define S3C2410_PA_SPI	   (0x59000000)
+#define S3C24XX_SZ_SPI	   SZ_1M
+
+/* SDI */
+#define S3C2410_PA_SDI	   (0x5A000000)
+#define S3C24XX_SZ_SDI	   SZ_1M
+
+/* CAMIF */
+#define S3C2440_PA_CAMIF   (0x4F000000)
+#define S3C2440_SZ_CAMIF   SZ_1M
+
+/* AC97 */
+
+#define S3C2440_PA_AC97	   (0x5B000000)
+#define S3C2440_SZ_AC97	   SZ_1M
+
+/* S3C2443 High-speed SD/MMC */
+#define S3C2443_PA_HSMMC   (0x4A800000)
+#define S3C2443_SZ_HSMMC   (256)
+
+/* ISA style IO, for each machine to sort out mappings for, if it
+ * implements it. We reserve two 16M regions for ISA.
+ */
+
+#define S3C24XX_VA_ISA_WORD  S3C2410_ADDR(0x02000000)
+#define S3C24XX_VA_ISA_BYTE  S3C2410_ADDR(0x03000000)
+
+/* physical addresses of all the chip-select areas */
+
+#define S3C2410_CS0 (0x00000000)
+#define S3C2410_CS1 (0x08000000)
+#define S3C2410_CS2 (0x10000000)
+#define S3C2410_CS3 (0x18000000)
+#define S3C2410_CS4 (0x20000000)
+#define S3C2410_CS5 (0x28000000)
+#define S3C2410_CS6 (0x30000000)
+#define S3C2410_CS7 (0x38000000)
+
+#define S3C2410_SDRAM_PA    (S3C2410_CS6)
+
+/* Use a single interface for common resources between S3C24XX cpus */
+
+#define S3C24XX_PA_IRQ      S3C2410_PA_IRQ
+#define S3C24XX_PA_MEMCTRL  S3C2410_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST  S3C2410_PA_USBHOST
+#define S3C24XX_PA_DMA      S3C2410_PA_DMA
+#define S3C24XX_PA_CLKPWR   S3C2410_PA_CLKPWR
+#define S3C24XX_PA_LCD      S3C2410_PA_LCD
+#define S3C24XX_PA_UART     S3C2410_PA_UART
+#define S3C24XX_PA_TIMER    S3C2410_PA_TIMER
+#define S3C24XX_PA_USBDEV   S3C2410_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
+#define S3C24XX_PA_IIC      S3C2410_PA_IIC
+#define S3C24XX_PA_IIS      S3C2410_PA_IIS
+#define S3C24XX_PA_GPIO     S3C2410_PA_GPIO
+#define S3C24XX_PA_RTC      S3C2410_PA_RTC
+#define S3C24XX_PA_ADC      S3C2410_PA_ADC
+#define S3C24XX_PA_SPI      S3C2410_PA_SPI
+
+/* deal with the registers that move under the 2412/2413 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#ifndef __ASSEMBLY__
+extern void __iomem *s3c24xx_va_gpio2;
+#endif
+#ifdef CONFIG_CPU_S3C2412_ONLY
+#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
+#else
+#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
+#endif
+#else
+#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
+#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
+#endif
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/memory.h b/arch/arm/mach-s3c2410/include/mach/memory.h
new file mode 100644
index 0000000..9378262
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/memory.h
@@ -0,0 +1,19 @@
+/* arch/arm/mach-s3c2410/include/mach/memory.h
+ *  from arch/arm/mach-rpc/include/mach/memory.h
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET	UL(0x30000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h b/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
new file mode 100644
index 0000000..e9e36b0
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
@@ -0,0 +1,30 @@
+/* arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
+ *
+ * Copyright 2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * OSIRIS - CPLD control constants
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_OSIRISCPLD_H
+#define __ASM_ARCH_OSIRISCPLD_H
+
+/* CTRL0 - NAND WP control */
+
+#define OSIRIS_CTRL0_NANDSEL		(0x3)
+#define OSIRIS_CTRL0_BOOT_INT		(1<<3)
+#define OSIRIS_CTRL0_PCMCIA		(1<<4)
+#define OSIRIS_CTRL0_FIX8		(1<<5)
+#define OSIRIS_CTRL0_PCMCIA_nWAIT	(1<<6)
+#define OSIRIS_CTRL0_PCMCIA_nIOIS16	(1<<7)
+
+#define OSIRIS_CTRL1_FIX8		(1<<0)
+
+#define OSIRIS_ID_REVMASK		(0x7)
+
+#endif /* __ASM_ARCH_OSIRISCPLD_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-map.h b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
new file mode 100644
index 0000000..639eff5
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
@@ -0,0 +1,42 @@
+/* arch/arm/mach-s3c2410/include/mach/osiris-map.h
+ *
+ * (c) 2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * OSIRIS - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* needs arch/map.h including with this */
+
+#ifndef __ASM_ARCH_OSIRISMAP_H
+#define __ASM_ARCH_OSIRISMAP_H
+
+/* start peripherals off after the S3C2410 */
+
+#define OSIRIS_IOADDR(x)	(S3C2410_ADDR((x) + 0x04000000))
+
+#define OSIRIS_PA_CPLD		(S3C2410_CS1 | (1<<26))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define OSIRIS_VA_CTRL0		OSIRIS_IOADDR(0x00000000)
+#define OSIRIS_PA_CTRL0		(OSIRIS_PA_CPLD)
+
+#define OSIRIS_VA_CTRL1		OSIRIS_IOADDR(0x00100000)
+#define OSIRIS_PA_CTRL1		(OSIRIS_PA_CPLD + (1<<23))
+
+#define OSIRIS_VA_CTRL2		OSIRIS_IOADDR(0x00200000)
+#define OSIRIS_PA_CTRL2		(OSIRIS_PA_CPLD + (2<<23))
+
+#define OSIRIS_VA_CTRL3		OSIRIS_IOADDR(0x00300000)
+#define OSIRIS_PA_CTRL3		(OSIRIS_PA_CPLD + (2<<23))
+
+#define OSIRIS_VA_IDREG		OSIRIS_IOADDR(0x00700000)
+#define OSIRIS_PA_IDREG		(OSIRIS_PA_CPLD + (7<<23))
+
+#endif /* __ASM_ARCH_OSIRISMAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/otom-map.h b/arch/arm/mach-s3c2410/include/mach/otom-map.h
new file mode 100644
index 0000000..f9277a5
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/otom-map.h
@@ -0,0 +1,30 @@
+/* arch/arm/mach-s3c2410/include/mach/otom-map.h
+ *
+ * (c) 2005 Guillaume GOURAT / NexVision
+ *          guillaume.gourat@nexvision.fr
+ *
+ * NexVision OTOM board memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* needs arch/map.h including with this */
+
+/* ok, we've used up to 0x01300000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space.
+ */
+
+#ifndef __ASM_ARCH_OTOMMAP_H
+#define __ASM_ARCH_OTOMMAP_H
+
+#define OTOM_PA_CS8900A_BASE       (S3C2410_CS3 + 0x01000000)	/* nGCS3 +0x01000000 */
+#define OTOM_VA_CS8900A_BASE       S3C2410_ADDR(0x04000000)		/* 0xF4000000 */
+
+/* physical offset addresses for the peripherals */
+
+#define OTOM_PA_FLASH0_BASE        (S3C2410_CS0)				/* Bank 0 */
+
+#endif /* __ASM_ARCH_OTOMMAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
new file mode 100644
index 0000000..d5836884
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
@@ -0,0 +1,197 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 clock register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_CLOCK
+#define __ASM_ARM_REGS_CLOCK "$Id: clock.h,v 1.4 2003/04/30 14:50:51 ben Exp $"
+
+#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s)))
+
+#define S3C2410_LOCKTIME    S3C2410_CLKREG(0x00)
+#define S3C2410_MPLLCON	    S3C2410_CLKREG(0x04)
+#define S3C2410_UPLLCON	    S3C2410_CLKREG(0x08)
+#define S3C2410_CLKCON	    S3C2410_CLKREG(0x0C)
+#define S3C2410_CLKSLOW	    S3C2410_CLKREG(0x10)
+#define S3C2410_CLKDIVN	    S3C2410_CLKREG(0x14)
+
+#define S3C2410_CLKCON_IDLE	     (1<<2)
+#define S3C2410_CLKCON_POWER	     (1<<3)
+#define S3C2410_CLKCON_NAND	     (1<<4)
+#define S3C2410_CLKCON_LCDC	     (1<<5)
+#define S3C2410_CLKCON_USBH	     (1<<6)
+#define S3C2410_CLKCON_USBD	     (1<<7)
+#define S3C2410_CLKCON_PWMT	     (1<<8)
+#define S3C2410_CLKCON_SDI	     (1<<9)
+#define S3C2410_CLKCON_UART0	     (1<<10)
+#define S3C2410_CLKCON_UART1	     (1<<11)
+#define S3C2410_CLKCON_UART2	     (1<<12)
+#define S3C2410_CLKCON_GPIO	     (1<<13)
+#define S3C2410_CLKCON_RTC	     (1<<14)
+#define S3C2410_CLKCON_ADC	     (1<<15)
+#define S3C2410_CLKCON_IIC	     (1<<16)
+#define S3C2410_CLKCON_IIS	     (1<<17)
+#define S3C2410_CLKCON_SPI	     (1<<18)
+
+#define S3C2410_PLLCON_MDIVSHIFT     12
+#define S3C2410_PLLCON_PDIVSHIFT     4
+#define S3C2410_PLLCON_SDIVSHIFT     0
+#define S3C2410_PLLCON_MDIVMASK	     ((1<<(1+(19-12)))-1)
+#define S3C2410_PLLCON_PDIVMASK	     ((1<<5)-1)
+#define S3C2410_PLLCON_SDIVMASK	     3
+
+/* DCLKCON register addresses in gpio.h */
+
+#define S3C2410_DCLKCON_DCLK0EN	     (1<<0)
+#define S3C2410_DCLKCON_DCLK0_PCLK   (0<<1)
+#define S3C2410_DCLKCON_DCLK0_UCLK   (1<<1)
+#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4)
+#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8)
+#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4)
+#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8)
+
+#define S3C2410_DCLKCON_DCLK1EN	     (1<<16)
+#define S3C2410_DCLKCON_DCLK1_PCLK   (0<<17)
+#define S3C2410_DCLKCON_DCLK1_UCLK   (1<<17)
+#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20)
+#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24)
+#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20)
+#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24)
+
+#define S3C2410_CLKDIVN_PDIVN	     (1<<0)
+#define S3C2410_CLKDIVN_HDIVN	     (1<<1)
+
+#define S3C2410_CLKSLOW_UCLK_OFF	(1<<7)
+#define S3C2410_CLKSLOW_MPLL_OFF	(1<<5)
+#define S3C2410_CLKSLOW_SLOW		(1<<4)
+#define S3C2410_CLKSLOW_SLOWVAL(x)	(x)
+#define S3C2410_CLKSLOW_GET_SLOWVAL(x)	((x) & 7)
+
+#ifndef __ASSEMBLY__
+
+#include <asm/div64.h>
+
+static inline unsigned int
+s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT;
+	pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT;
+	sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT;
+
+	mdiv &= S3C2410_PLLCON_MDIVMASK;
+	pdiv &= S3C2410_PLLCON_PDIVMASK;
+	sdiv &= S3C2410_PLLCON_SDIVMASK;
+
+	fvco = (uint64_t)baseclk * (mdiv + 8);
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+
+/* extra registers */
+#define S3C2440_CAMDIVN	    S3C2410_CLKREG(0x18)
+
+#define S3C2440_CLKCON_CAMERA        (1<<19)
+#define S3C2440_CLKCON_AC97          (1<<20)
+
+#define S3C2440_CLKDIVN_PDIVN	     (1<<0)
+#define S3C2440_CLKDIVN_HDIVN_MASK   (3<<1)
+#define S3C2440_CLKDIVN_HDIVN_1      (0<<1)
+#define S3C2440_CLKDIVN_HDIVN_2      (1<<1)
+#define S3C2440_CLKDIVN_HDIVN_4_8    (2<<1)
+#define S3C2440_CLKDIVN_HDIVN_3_6    (3<<1)
+#define S3C2440_CLKDIVN_UCLK         (1<<3)
+
+#define S3C2440_CAMDIVN_CAMCLK_MASK  (0xf<<0)
+#define S3C2440_CAMDIVN_CAMCLK_SEL   (1<<4)
+#define S3C2440_CAMDIVN_HCLK3_HALF   (1<<8)
+#define S3C2440_CAMDIVN_HCLK4_HALF   (1<<9)
+#define S3C2440_CAMDIVN_DVSEN        (1<<12)
+
+#define S3C2442_CAMDIVN_CAMCLK_DIV3  (1<<5)
+
+#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+
+#define S3C2412_OSCSET		S3C2410_CLKREG(0x18)
+#define S3C2412_CLKSRC		S3C2410_CLKREG(0x1C)
+
+#define S3C2412_PLLCON_OFF		(1<<20)
+
+#define S3C2412_CLKDIVN_PDIVN		(1<<2)
+#define S3C2412_CLKDIVN_HDIVN_MASK	(3<<0)
+#define S3C2412_CLKDIVN_ARMDIVN		(1<<3)
+#define S3C2412_CLKDIVN_DVSEN		(1<<4)
+#define S3C2412_CLKDIVN_HALFHCLK	(1<<5)
+#define S3C2412_CLKDIVN_USB48DIV	(1<<6)
+#define S3C2412_CLKDIVN_UARTDIV_MASK	(15<<8)
+#define S3C2412_CLKDIVN_UARTDIV_SHIFT	(8)
+#define S3C2412_CLKDIVN_I2SDIV_MASK	(15<<12)
+#define S3C2412_CLKDIVN_I2SDIV_SHIFT	(12)
+#define S3C2412_CLKDIVN_CAMDIV_MASK	(15<<16)
+#define S3C2412_CLKDIVN_CAMDIV_SHIFT	(16)
+
+#define S3C2412_CLKCON_WDT		(1<<28)
+#define S3C2412_CLKCON_SPI		(1<<27)
+#define S3C2412_CLKCON_IIS		(1<<26)
+#define S3C2412_CLKCON_IIC		(1<<25)
+#define S3C2412_CLKCON_ADC		(1<<24)
+#define S3C2412_CLKCON_RTC		(1<<23)
+#define S3C2412_CLKCON_GPIO		(1<<22)
+#define S3C2412_CLKCON_UART2		(1<<21)
+#define S3C2412_CLKCON_UART1		(1<<20)
+#define S3C2412_CLKCON_UART0		(1<<19)
+#define S3C2412_CLKCON_SDI		(1<<18)
+#define S3C2412_CLKCON_PWMT		(1<<17)
+#define S3C2412_CLKCON_USBD		(1<<16)
+#define S3C2412_CLKCON_CAMCLK		(1<<15)
+#define S3C2412_CLKCON_UARTCLK		(1<<14)
+/* missing 13 */
+#define S3C2412_CLKCON_USB_HOST48	(1<<12)
+#define S3C2412_CLKCON_USB_DEV48	(1<<11)
+#define S3C2412_CLKCON_HCLKdiv2		(1<<10)
+#define S3C2412_CLKCON_HCLKx2		(1<<9)
+#define S3C2412_CLKCON_SDRAM		(1<<8)
+/* missing 7 */
+#define S3C2412_CLKCON_USBH		S3C2410_CLKCON_USBH
+#define S3C2412_CLKCON_LCDC		S3C2410_CLKCON_LCDC
+#define S3C2412_CLKCON_NAND		S3C2410_CLKCON_NAND
+#define S3C2412_CLKCON_DMA3		(1<<3)
+#define S3C2412_CLKCON_DMA2		(1<<2)
+#define S3C2412_CLKCON_DMA1		(1<<1)
+#define S3C2412_CLKCON_DMA0		(1<<0)
+
+/* clock sourec controls */
+
+#define S3C2412_CLKSRC_EXTCLKDIV_MASK		(7 << 0)
+#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT		(0)
+#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV	(1<<3)
+#define S3C2412_CLKSRC_MSYSCLK_MPLL		(1<<4)
+#define S3C2412_CLKSRC_USYSCLK_UPLL		(1<<5)
+#define S3C2412_CLKSRC_UARTCLK_MPLL		(1<<8)
+#define S3C2412_CLKSRC_I2SCLK_MPLL		(1<<9)
+#define S3C2412_CLKSRC_USBCLK_HCLK		(1<<10)
+#define S3C2412_CLKSRC_CAMCLK_HCLK		(1<<11)
+#define S3C2412_CLKSRC_UREFCLK_EXTCLK	(1<<12)
+#define S3C2412_CLKSRC_EREFCLK_EXTCLK	(1<<14)
+
+#endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */
+
+#endif /* __ASM_ARM_REGS_CLOCK */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h
new file mode 100644
index 0000000..3c3853c
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h
@@ -0,0 +1,184 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-dsc.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2440/S3C2412 Signal Drive Strength Control
+*/
+
+
+#ifndef __ASM_ARCH_REGS_DSC_H
+#define __ASM_ARCH_REGS_DSC_H "2440-dsc"
+
+#if defined(CONFIG_CPU_S3C2412)
+#define S3C2412_DSC0	   S3C2410_GPIOREG(0xdc)
+#define S3C2412_DSC1	   S3C2410_GPIOREG(0xe0)
+#endif
+
+#if defined(CONFIG_CPU_S3C244X)
+
+#define S3C2440_DSC0	   S3C2410_GPIOREG(0xc4)
+#define S3C2440_DSC1	   S3C2410_GPIOREG(0xc8)
+
+#define S3C2440_SELECT_DSC0 (0)
+#define S3C2440_SELECT_DSC1 (1<<31)
+
+#define S3C2440_DSC_GETSHIFT(x) ((x) & 31)
+
+#define S3C2440_DSC0_DISABLE	(1<<31)
+
+#define S3C2440_DSC0_ADDR       (S3C2440_SELECT_DSC0 | 8)
+#define S3C2440_DSC0_ADDR_12mA  (0<<8)
+#define S3C2440_DSC0_ADDR_10mA  (1<<8)
+#define S3C2440_DSC0_ADDR_8mA   (2<<8)
+#define S3C2440_DSC0_ADDR_6mA   (3<<8)
+#define S3C2440_DSC0_ADDR_MASK  (3<<8)
+
+/* D24..D31 */
+#define S3C2440_DSC0_DATA3      (S3C2440_SELECT_DSC0 | 6)
+#define S3C2440_DSC0_DATA3_12mA (0<<6)
+#define S3C2440_DSC0_DATA3_10mA (1<<6)
+#define S3C2440_DSC0_DATA3_8mA  (2<<6)
+#define S3C2440_DSC0_DATA3_6mA  (3<<6)
+#define S3C2440_DSC0_DATA3_MASK (3<<6)
+
+/* D16..D23 */
+#define S3C2440_DSC0_DATA2      (S3C2440_SELECT_DSC0 | 4)
+#define S3C2440_DSC0_DATA2_12mA (0<<4)
+#define S3C2440_DSC0_DATA2_10mA (1<<4)
+#define S3C2440_DSC0_DATA2_8mA  (2<<4)
+#define S3C2440_DSC0_DATA2_6mA  (3<<4)
+#define S3C2440_DSC0_DATA2_MASK (3<<4)
+
+/* D8..D15 */
+#define S3C2440_DSC0_DATA1      (S3C2440_SELECT_DSC0 | 2)
+#define S3C2440_DSC0_DATA1_12mA (0<<2)
+#define S3C2440_DSC0_DATA1_10mA (1<<2)
+#define S3C2440_DSC0_DATA1_8mA  (2<<2)
+#define S3C2440_DSC0_DATA1_6mA  (3<<2)
+#define S3C2440_DSC0_DATA1_MASK (3<<2)
+
+/* D0..D7 */
+#define S3C2440_DSC0_DATA0      (S3C2440_SELECT_DSC0 | 0)
+#define S3C2440_DSC0_DATA0_12mA (0<<0)
+#define S3C2440_DSC0_DATA0_10mA (1<<0)
+#define S3C2440_DSC0_DATA0_8mA  (2<<0)
+#define S3C2440_DSC0_DATA0_6mA  (3<<0)
+#define S3C2440_DSC0_DATA0_MASK (3<<0)
+
+#define S3C2440_DSC1_SCK1       (S3C2440_SELECT_DSC1 | 28)
+#define S3C2440_DSC1_SCK1_12mA  (0<<28)
+#define S3C2440_DSC1_SCK1_10mA  (1<<28)
+#define S3C2440_DSC1_SCK1_8mA   (2<<28)
+#define S3C2440_DSC1_SCK1_6mA   (3<<28)
+#define S3C2440_DSC1_SCK1_MASK  (3<<28)
+
+#define S3C2440_DSC1_SCK0       (S3C2440_SELECT_DSC1 | 26)
+#define S3C2440_DSC1_SCK0_12mA  (0<<26)
+#define S3C2440_DSC1_SCK0_10mA  (1<<26)
+#define S3C2440_DSC1_SCK0_8mA   (2<<26)
+#define S3C2440_DSC1_SCK0_6mA   (3<<26)
+#define S3C2440_DSC1_SCK0_MASK  (3<<26)
+
+#define S3C2440_DSC1_SCKE       (S3C2440_SELECT_DSC1 | 24)
+#define S3C2440_DSC1_SCKE_10mA  (0<<24)
+#define S3C2440_DSC1_SCKE_8mA   (1<<24)
+#define S3C2440_DSC1_SCKE_6mA   (2<<24)
+#define S3C2440_DSC1_SCKE_4mA   (3<<24)
+#define S3C2440_DSC1_SCKE_MASK  (3<<24)
+
+/* SDRAM nRAS/nCAS */
+#define S3C2440_DSC1_SDR        (S3C2440_SELECT_DSC1 | 22)
+#define S3C2440_DSC1_SDR_10mA   (0<<22)
+#define S3C2440_DSC1_SDR_8mA    (1<<22)
+#define S3C2440_DSC1_SDR_6mA    (2<<22)
+#define S3C2440_DSC1_SDR_4mA    (3<<22)
+#define S3C2440_DSC1_SDR_MASK   (3<<22)
+
+/* NAND Flash Controller */
+#define S3C2440_DSC1_NFC        (S3C2440_SELECT_DSC1 | 20)
+#define S3C2440_DSC1_NFC_10mA   (0<<20)
+#define S3C2440_DSC1_NFC_8mA    (1<<20)
+#define S3C2440_DSC1_NFC_6mA    (2<<20)
+#define S3C2440_DSC1_NFC_4mA    (3<<20)
+#define S3C2440_DSC1_NFC_MASK   (3<<20)
+
+/* nBE[0..3] */
+#define S3C2440_DSC1_nBE        (S3C2440_SELECT_DSC1 | 18)
+#define S3C2440_DSC1_nBE_10mA   (0<<18)
+#define S3C2440_DSC1_nBE_8mA    (1<<18)
+#define S3C2440_DSC1_nBE_6mA    (2<<18)
+#define S3C2440_DSC1_nBE_4mA    (3<<18)
+#define S3C2440_DSC1_nBE_MASK   (3<<18)
+
+#define S3C2440_DSC1_WOE        (S3C2440_SELECT_DSC1 | 16)
+#define S3C2440_DSC1_WOE_10mA   (0<<16)
+#define S3C2440_DSC1_WOE_8mA    (1<<16)
+#define S3C2440_DSC1_WOE_6mA    (2<<16)
+#define S3C2440_DSC1_WOE_4mA    (3<<16)
+#define S3C2440_DSC1_WOE_MASK   (3<<16)
+
+#define S3C2440_DSC1_CS7        (S3C2440_SELECT_DSC1 | 14)
+#define S3C2440_DSC1_CS7_10mA   (0<<14)
+#define S3C2440_DSC1_CS7_8mA    (1<<14)
+#define S3C2440_DSC1_CS7_6mA    (2<<14)
+#define S3C2440_DSC1_CS7_4mA    (3<<14)
+#define S3C2440_DSC1_CS7_MASK   (3<<14)
+
+#define S3C2440_DSC1_CS6        (S3C2440_SELECT_DSC1 | 12)
+#define S3C2440_DSC1_CS6_10mA   (0<<12)
+#define S3C2440_DSC1_CS6_8mA    (1<<12)
+#define S3C2440_DSC1_CS6_6mA    (2<<12)
+#define S3C2440_DSC1_CS6_4mA    (3<<12)
+#define S3C2440_DSC1_CS6_MASK   (3<<12)
+
+#define S3C2440_DSC1_CS5        (S3C2440_SELECT_DSC1 | 10)
+#define S3C2440_DSC1_CS5_10mA   (0<<10)
+#define S3C2440_DSC1_CS5_8mA    (1<<10)
+#define S3C2440_DSC1_CS5_6mA    (2<<10)
+#define S3C2440_DSC1_CS5_4mA    (3<<10)
+#define S3C2440_DSC1_CS5_MASK   (3<<10)
+
+#define S3C2440_DSC1_CS4        (S3C2440_SELECT_DSC1 | 8)
+#define S3C2440_DSC1_CS4_10mA   (0<<8)
+#define S3C2440_DSC1_CS4_8mA    (1<<8)
+#define S3C2440_DSC1_CS4_6mA    (2<<8)
+#define S3C2440_DSC1_CS4_4mA    (3<<8)
+#define S3C2440_DSC1_CS4_MASK   (3<<8)
+
+#define S3C2440_DSC1_CS3        (S3C2440_SELECT_DSC1 | 6)
+#define S3C2440_DSC1_CS3_10mA   (0<<6)
+#define S3C2440_DSC1_CS3_8mA    (1<<6)
+#define S3C2440_DSC1_CS3_6mA    (2<<6)
+#define S3C2440_DSC1_CS3_4mA    (3<<6)
+#define S3C2440_DSC1_CS3_MASK   (3<<6)
+
+#define S3C2440_DSC1_CS2        (S3C2440_SELECT_DSC1 | 4)
+#define S3C2440_DSC1_CS2_10mA   (0<<4)
+#define S3C2440_DSC1_CS2_8mA    (1<<4)
+#define S3C2440_DSC1_CS2_6mA    (2<<4)
+#define S3C2440_DSC1_CS2_4mA    (3<<4)
+#define S3C2440_DSC1_CS2_MASK   (3<<4)
+
+#define S3C2440_DSC1_CS1        (S3C2440_SELECT_DSC1 | 2)
+#define S3C2440_DSC1_CS1_10mA   (0<<2)
+#define S3C2440_DSC1_CS1_8mA    (1<<2)
+#define S3C2440_DSC1_CS1_6mA    (2<<2)
+#define S3C2440_DSC1_CS1_4mA    (3<<2)
+#define S3C2440_DSC1_CS1_MASK   (3<<2)
+
+#define S3C2440_DSC1_CS0        (S3C2440_SELECT_DSC1 | 0)
+#define S3C2440_DSC1_CS0_10mA   (0<<0)
+#define S3C2440_DSC1_CS0_8mA    (1<<0)
+#define S3C2440_DSC1_CS0_6mA    (2<<0)
+#define S3C2440_DSC1_CS0_4mA    (3<<0)
+#define S3C2440_DSC1_CS0_MASK   (3<<0)
+
+#endif /* CONFIG_CPU_S3C2440 */
+
+#endif	/* __ASM_ARCH_REGS_DSC_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
new file mode 100644
index 0000000..30bec02
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -0,0 +1,1163 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
+ *		           http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 GPIO register definitions
+*/
+
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H "$Id: gpio.h,v 1.5 2003/05/19 12:51:08 ben Exp $"
+
+#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
+
+#define S3C2410_GPIO_BANKA   (32*0)
+#define S3C2410_GPIO_BANKB   (32*1)
+#define S3C2410_GPIO_BANKC   (32*2)
+#define S3C2410_GPIO_BANKD   (32*3)
+#define S3C2410_GPIO_BANKE   (32*4)
+#define S3C2410_GPIO_BANKF   (32*5)
+#define S3C2410_GPIO_BANKG   (32*6)
+#define S3C2410_GPIO_BANKH   (32*7)
+
+#ifdef CONFIG_CPU_S3C2400
+#define S3C24XX_GPIO_BASE(x)  S3C2400_GPIO_BASE(x)
+#define S3C24XX_MISCCR        S3C2400_MISCCR
+#else
+#define S3C24XX_GPIO_BASE(x)  S3C2410_GPIO_BASE(x)
+#define S3C24XX_MISCCR	      S3C24XX_GPIOREG2(0x80)
+#endif /* CONFIG_CPU_S3C2400 */
+
+
+/* S3C2400 doesn't have a 1:1 mapping to S3C2410 gpio base pins */
+
+#define S3C2400_BANKNUM(pin)     (((pin) & ~31) / 32)
+#define S3C2400_BASEA2B(pin)     ((((pin) & ~31) >> 2))
+#define S3C2400_BASEC2H(pin)     ((S3C2400_BANKNUM(pin) * 10) + \
+                                 (2 * (S3C2400_BANKNUM(pin)-2)))
+
+#define S3C2400_GPIO_BASE(pin)   (pin < S3C2410_GPIO_BANKC ? \
+                                 S3C2400_BASEA2B(pin)+S3C24XX_VA_GPIO : \
+                                 S3C2400_BASEC2H(pin)+S3C24XX_VA_GPIO)
+
+
+#define S3C2410_GPIO_BASE(pin)   ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO)
+#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31)
+
+/* general configuration options */
+
+#define S3C2410_GPIO_LEAVE   (0xFFFFFFFF)
+#define S3C2410_GPIO_INPUT   (0xFFFFFFF0)	/* not available on A */
+#define S3C2410_GPIO_OUTPUT  (0xFFFFFFF1)
+#define S3C2410_GPIO_IRQ     (0xFFFFFFF2)	/* not available for all */
+#define S3C2410_GPIO_SFN2    (0xFFFFFFF2)	/* bank A => addr/cs/nand */
+#define S3C2410_GPIO_SFN3    (0xFFFFFFF3)	/* not available on A */
+
+/* register address for the GPIO registers.
+ * S3C24XX_GPIOREG2 is for the second set of registers in the
+ * GPIO which move between s3c2410 and s3c2412 type systems */
+
+#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
+#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2)
+
+
+/* configure GPIO ports A..G */
+
+/* port A - S3C2410: 22bits, zero in bit X makes pin X output
+ *          S3C2400: 18bits, zero in bit X makes pin X output
+ * 1 makes port special function, this is default
+*/
+#define S3C2410_GPACON	   S3C2410_GPIOREG(0x00)
+#define S3C2410_GPADAT	   S3C2410_GPIOREG(0x04)
+
+#define S3C2400_GPACON	   S3C2410_GPIOREG(0x00)
+#define S3C2400_GPADAT	   S3C2410_GPIOREG(0x04)
+
+#define S3C2410_GPA0         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
+#define S3C2410_GPA0_OUT     (0<<0)
+#define S3C2410_GPA0_ADDR0   (1<<0)
+
+#define S3C2410_GPA1         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
+#define S3C2410_GPA1_OUT     (0<<1)
+#define S3C2410_GPA1_ADDR16  (1<<1)
+
+#define S3C2410_GPA2         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
+#define S3C2410_GPA2_OUT     (0<<2)
+#define S3C2410_GPA2_ADDR17  (1<<2)
+
+#define S3C2410_GPA3         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
+#define S3C2410_GPA3_OUT     (0<<3)
+#define S3C2410_GPA3_ADDR18  (1<<3)
+
+#define S3C2410_GPA4         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
+#define S3C2410_GPA4_OUT     (0<<4)
+#define S3C2410_GPA4_ADDR19  (1<<4)
+
+#define S3C2410_GPA5         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
+#define S3C2410_GPA5_OUT     (0<<5)
+#define S3C2410_GPA5_ADDR20  (1<<5)
+
+#define S3C2410_GPA6         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
+#define S3C2410_GPA6_OUT     (0<<6)
+#define S3C2410_GPA6_ADDR21  (1<<6)
+
+#define S3C2410_GPA7         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
+#define S3C2410_GPA7_OUT     (0<<7)
+#define S3C2410_GPA7_ADDR22  (1<<7)
+
+#define S3C2410_GPA8         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
+#define S3C2410_GPA8_OUT     (0<<8)
+#define S3C2410_GPA8_ADDR23  (1<<8)
+
+#define S3C2410_GPA9         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
+#define S3C2410_GPA9_OUT     (0<<9)
+#define S3C2410_GPA9_ADDR24  (1<<9)
+
+#define S3C2410_GPA10        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
+#define S3C2410_GPA10_OUT    (0<<10)
+#define S3C2410_GPA10_ADDR25 (1<<10)
+#define S3C2400_GPA10_SCKE   (1<<10)
+
+#define S3C2410_GPA11        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
+#define S3C2410_GPA11_OUT    (0<<11)
+#define S3C2410_GPA11_ADDR26 (1<<11)
+#define S3C2400_GPA11_nCAS0  (1<<11)
+
+#define S3C2410_GPA12        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
+#define S3C2410_GPA12_OUT    (0<<12)
+#define S3C2410_GPA12_nGCS1  (1<<12)
+#define S3C2400_GPA12_nCAS1  (1<<12)
+
+#define S3C2410_GPA13        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
+#define S3C2410_GPA13_OUT    (0<<13)
+#define S3C2410_GPA13_nGCS2  (1<<13)
+#define S3C2400_GPA13_nGCS1  (1<<13)
+
+#define S3C2410_GPA14        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
+#define S3C2410_GPA14_OUT    (0<<14)
+#define S3C2410_GPA14_nGCS3  (1<<14)
+#define S3C2400_GPA14_nGCS2  (1<<14)
+
+#define S3C2410_GPA15        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
+#define S3C2410_GPA15_OUT    (0<<15)
+#define S3C2410_GPA15_nGCS4  (1<<15)
+#define S3C2400_GPA15_nGCS3  (1<<15)
+
+#define S3C2410_GPA16        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
+#define S3C2410_GPA16_OUT    (0<<16)
+#define S3C2410_GPA16_nGCS5  (1<<16)
+#define S3C2400_GPA16_nGCS4  (1<<16)
+
+#define S3C2410_GPA17        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
+#define S3C2410_GPA17_OUT    (0<<17)
+#define S3C2410_GPA17_CLE    (1<<17)
+#define S3C2400_GPA17_nGCS5  (1<<17)
+
+#define S3C2410_GPA18        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
+#define S3C2410_GPA18_OUT    (0<<18)
+#define S3C2410_GPA18_ALE    (1<<18)
+
+#define S3C2410_GPA19        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
+#define S3C2410_GPA19_OUT    (0<<19)
+#define S3C2410_GPA19_nFWE   (1<<19)
+
+#define S3C2410_GPA20        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
+#define S3C2410_GPA20_OUT    (0<<20)
+#define S3C2410_GPA20_nFRE   (1<<20)
+
+#define S3C2410_GPA21        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
+#define S3C2410_GPA21_OUT    (0<<21)
+#define S3C2410_GPA21_nRSTOUT (1<<21)
+
+#define S3C2410_GPA22        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
+#define S3C2410_GPA22_OUT    (0<<22)
+#define S3C2410_GPA22_nFCE   (1<<22)
+
+/* 0x08 and 0x0c are reserved on S3C2410 */
+
+/* S3C2410:
+ * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
+ *   00 = input, 01 = output, 10=special function, 11=reserved
+
+ * S3C2400:
+ * GPB is 16 IO pins, each configured by 2 bits each in GPBCON.
+ *   00 = input, 01 = output, 10=data, 11=special function
+
+ * bit 0,1 = pin 0, 2,3= pin 1...
+ *
+ * CPBUP = pull up resistor control, 1=disabled, 0=enabled
+*/
+
+#define S3C2410_GPBCON	   S3C2410_GPIOREG(0x10)
+#define S3C2410_GPBDAT	   S3C2410_GPIOREG(0x14)
+#define S3C2410_GPBUP	   S3C2410_GPIOREG(0x18)
+
+#define S3C2400_GPBCON	   S3C2410_GPIOREG(0x08)
+#define S3C2400_GPBDAT	   S3C2410_GPIOREG(0x0C)
+#define S3C2400_GPBUP	   S3C2410_GPIOREG(0x10)
+
+/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
+
+#define S3C2410_GPB0         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
+#define S3C2410_GPB0_INP     (0x00 << 0)
+#define S3C2410_GPB0_OUTP    (0x01 << 0)
+#define S3C2410_GPB0_TOUT0   (0x02 << 0)
+#define S3C2400_GPB0_DATA16  (0x02 << 0)
+
+#define S3C2410_GPB1         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
+#define S3C2410_GPB1_INP     (0x00 << 2)
+#define S3C2410_GPB1_OUTP    (0x01 << 2)
+#define S3C2410_GPB1_TOUT1   (0x02 << 2)
+#define S3C2400_GPB1_DATA17  (0x02 << 2)
+
+#define S3C2410_GPB2         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
+#define S3C2410_GPB2_INP     (0x00 << 4)
+#define S3C2410_GPB2_OUTP    (0x01 << 4)
+#define S3C2410_GPB2_TOUT2   (0x02 << 4)
+#define S3C2400_GPB2_DATA18  (0x02 << 4)
+#define S3C2400_GPB2_TCLK1   (0x03 << 4)
+
+#define S3C2410_GPB3         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
+#define S3C2410_GPB3_INP     (0x00 << 6)
+#define S3C2410_GPB3_OUTP    (0x01 << 6)
+#define S3C2410_GPB3_TOUT3   (0x02 << 6)
+#define S3C2400_GPB3_DATA19  (0x02 << 6)
+#define S3C2400_GPB3_TXD1    (0x03 << 6)
+
+#define S3C2410_GPB4         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
+#define S3C2410_GPB4_INP     (0x00 << 8)
+#define S3C2410_GPB4_OUTP    (0x01 << 8)
+#define S3C2410_GPB4_TCLK0   (0x02 << 8)
+#define S3C2400_GPB4_DATA20  (0x02 << 8)
+#define S3C2410_GPB4_MASK    (0x03 << 8)
+#define S3C2400_GPB4_RXD1    (0x03 << 8)
+#define S3C2400_GPB4_MASK    (0x03 << 8)
+
+#define S3C2410_GPB5         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
+#define S3C2410_GPB5_INP     (0x00 << 10)
+#define S3C2410_GPB5_OUTP    (0x01 << 10)
+#define S3C2410_GPB5_nXBACK  (0x02 << 10)
+#define S3C2443_GPB5_XBACK   (0x03 << 10)
+#define S3C2400_GPB5_DATA21  (0x02 << 10)
+#define S3C2400_GPB5_nCTS1   (0x03 << 10)
+
+#define S3C2410_GPB6         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
+#define S3C2410_GPB6_INP     (0x00 << 12)
+#define S3C2410_GPB6_OUTP    (0x01 << 12)
+#define S3C2410_GPB6_nXBREQ  (0x02 << 12)
+#define S3C2443_GPB6_XBREQ   (0x03 << 12)
+#define S3C2400_GPB6_DATA22  (0x02 << 12)
+#define S3C2400_GPB6_nRTS1   (0x03 << 12)
+
+#define S3C2410_GPB7         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
+#define S3C2410_GPB7_INP     (0x00 << 14)
+#define S3C2410_GPB7_OUTP    (0x01 << 14)
+#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
+#define S3C2443_GPB7_XDACK1  (0x03 << 14)
+#define S3C2400_GPB7_DATA23  (0x02 << 14)
+
+#define S3C2410_GPB8         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
+#define S3C2410_GPB8_INP     (0x00 << 16)
+#define S3C2410_GPB8_OUTP    (0x01 << 16)
+#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
+#define S3C2400_GPB8_DATA24  (0x02 << 16)
+
+#define S3C2410_GPB9         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
+#define S3C2410_GPB9_INP     (0x00 << 18)
+#define S3C2410_GPB9_OUTP    (0x01 << 18)
+#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
+#define S3C2443_GPB9_XDACK0  (0x03 << 18)
+#define S3C2400_GPB9_DATA25  (0x02 << 18)
+#define S3C2400_GPB9_I2SSDI  (0x03 << 18)
+
+#define S3C2410_GPB10        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
+#define S3C2410_GPB10_INP    (0x00 << 20)
+#define S3C2410_GPB10_OUTP   (0x01 << 20)
+#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
+#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
+#define S3C2400_GPB10_DATA26 (0x02 << 20)
+#define S3C2400_GPB10_nSS    (0x03 << 20)
+
+#define S3C2400_GPB11        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
+#define S3C2400_GPB11_INP    (0x00 << 22)
+#define S3C2400_GPB11_OUTP   (0x01 << 22)
+#define S3C2400_GPB11_DATA27 (0x02 << 22)
+
+#define S3C2400_GPB12        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
+#define S3C2400_GPB12_INP    (0x00 << 24)
+#define S3C2400_GPB12_OUTP   (0x01 << 24)
+#define S3C2400_GPB12_DATA28 (0x02 << 24)
+
+#define S3C2400_GPB13        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
+#define S3C2400_GPB13_INP    (0x00 << 26)
+#define S3C2400_GPB13_OUTP   (0x01 << 26)
+#define S3C2400_GPB13_DATA29 (0x02 << 26)
+
+#define S3C2400_GPB14        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
+#define S3C2400_GPB14_INP    (0x00 << 28)
+#define S3C2400_GPB14_OUTP   (0x01 << 28)
+#define S3C2400_GPB14_DATA30 (0x02 << 28)
+
+#define S3C2400_GPB15        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
+#define S3C2400_GPB15_INP    (0x00 << 30)
+#define S3C2400_GPB15_OUTP   (0x01 << 30)
+#define S3C2400_GPB15_DATA31 (0x02 << 30)
+
+#define S3C2410_GPB_PUPDIS(x)  (1<<(x))
+
+/* Port C consits of 16 GPIO/Special function
+ *
+ * almost identical setup to port b, but the special functions are mostly
+ * to do with the video system's sync/etc.
+*/
+
+#define S3C2410_GPCCON	   S3C2410_GPIOREG(0x20)
+#define S3C2410_GPCDAT	   S3C2410_GPIOREG(0x24)
+#define S3C2410_GPCUP	   S3C2410_GPIOREG(0x28)
+
+#define S3C2400_GPCCON	   S3C2410_GPIOREG(0x14)
+#define S3C2400_GPCDAT	   S3C2410_GPIOREG(0x18)
+#define S3C2400_GPCUP	   S3C2410_GPIOREG(0x1C)
+
+#define S3C2410_GPC0            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
+#define S3C2410_GPC0_INP	(0x00 << 0)
+#define S3C2410_GPC0_OUTP	(0x01 << 0)
+#define S3C2410_GPC0_LEND	(0x02 << 0)
+#define S3C2400_GPC0_VD0 	(0x02 << 0)
+
+#define S3C2410_GPC1            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
+#define S3C2410_GPC1_INP	(0x00 << 2)
+#define S3C2410_GPC1_OUTP	(0x01 << 2)
+#define S3C2410_GPC1_VCLK	(0x02 << 2)
+#define S3C2400_GPC1_VD1 	(0x02 << 2)
+
+#define S3C2410_GPC2            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
+#define S3C2410_GPC2_INP	(0x00 << 4)
+#define S3C2410_GPC2_OUTP	(0x01 << 4)
+#define S3C2410_GPC2_VLINE	(0x02 << 4)
+#define S3C2400_GPC2_VD2  	(0x02 << 4)
+
+#define S3C2410_GPC3            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
+#define S3C2410_GPC3_INP	(0x00 << 6)
+#define S3C2410_GPC3_OUTP	(0x01 << 6)
+#define S3C2410_GPC3_VFRAME	(0x02 << 6)
+#define S3C2400_GPC3_VD3   	(0x02 << 6)
+
+#define S3C2410_GPC4            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
+#define S3C2410_GPC4_INP	(0x00 << 8)
+#define S3C2410_GPC4_OUTP	(0x01 << 8)
+#define S3C2410_GPC4_VM		(0x02 << 8)
+#define S3C2400_GPC4_VD4	(0x02 << 8)
+
+#define S3C2410_GPC5            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
+#define S3C2410_GPC5_INP	(0x00 << 10)
+#define S3C2410_GPC5_OUTP	(0x01 << 10)
+#define S3C2410_GPC5_LCDVF0	(0x02 << 10)
+#define S3C2400_GPC5_VD5   	(0x02 << 10)
+
+#define S3C2410_GPC6            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
+#define S3C2410_GPC6_INP	(0x00 << 12)
+#define S3C2410_GPC6_OUTP	(0x01 << 12)
+#define S3C2410_GPC6_LCDVF1	(0x02 << 12)
+#define S3C2400_GPC6_VD6   	(0x02 << 12)
+
+#define S3C2410_GPC7            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
+#define S3C2410_GPC7_INP	(0x00 << 14)
+#define S3C2410_GPC7_OUTP	(0x01 << 14)
+#define S3C2410_GPC7_LCDVF2	(0x02 << 14)
+#define S3C2400_GPC7_VD7   	(0x02 << 14)
+
+#define S3C2410_GPC8            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
+#define S3C2410_GPC8_INP	(0x00 << 16)
+#define S3C2410_GPC8_OUTP	(0x01 << 16)
+#define S3C2410_GPC8_VD0	(0x02 << 16)
+#define S3C2400_GPC8_VD8	(0x02 << 16)
+
+#define S3C2410_GPC9            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
+#define S3C2410_GPC9_INP	(0x00 << 18)
+#define S3C2410_GPC9_OUTP	(0x01 << 18)
+#define S3C2410_GPC9_VD1	(0x02 << 18)
+#define S3C2400_GPC9_VD9	(0x02 << 18)
+
+#define S3C2410_GPC10           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
+#define S3C2410_GPC10_INP	(0x00 << 20)
+#define S3C2410_GPC10_OUTP	(0x01 << 20)
+#define S3C2410_GPC10_VD2	(0x02 << 20)
+#define S3C2400_GPC10_VD10	(0x02 << 20)
+
+#define S3C2410_GPC11           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
+#define S3C2410_GPC11_INP	(0x00 << 22)
+#define S3C2410_GPC11_OUTP	(0x01 << 22)
+#define S3C2410_GPC11_VD3	(0x02 << 22)
+#define S3C2400_GPC11_VD11	(0x02 << 22)
+
+#define S3C2410_GPC12           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
+#define S3C2410_GPC12_INP	(0x00 << 24)
+#define S3C2410_GPC12_OUTP	(0x01 << 24)
+#define S3C2410_GPC12_VD4	(0x02 << 24)
+#define S3C2400_GPC12_VD12	(0x02 << 24)
+
+#define S3C2410_GPC13           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
+#define S3C2410_GPC13_INP	(0x00 << 26)
+#define S3C2410_GPC13_OUTP	(0x01 << 26)
+#define S3C2410_GPC13_VD5	(0x02 << 26)
+#define S3C2400_GPC13_VD13	(0x02 << 26)
+
+#define S3C2410_GPC14           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
+#define S3C2410_GPC14_INP	(0x00 << 28)
+#define S3C2410_GPC14_OUTP	(0x01 << 28)
+#define S3C2410_GPC14_VD6	(0x02 << 28)
+#define S3C2400_GPC14_VD14	(0x02 << 28)
+
+#define S3C2410_GPC15           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
+#define S3C2410_GPC15_INP	(0x00 << 30)
+#define S3C2410_GPC15_OUTP	(0x01 << 30)
+#define S3C2410_GPC15_VD7	(0x02 << 30)
+#define S3C2400_GPC15_VD15	(0x02 << 30)
+
+#define S3C2410_GPC_PUPDIS(x)  (1<<(x))
+
+/*
+ * S3C2410: Port D consists of 16 GPIO/Special function
+ *
+ * almost identical setup to port b, but the special functions are mostly
+ * to do with the video system's data.
+ *
+ * S3C2400: Port D consists of 11 GPIO/Special function
+ *
+ * almost identical setup to port c
+*/
+
+#define S3C2410_GPDCON	   S3C2410_GPIOREG(0x30)
+#define S3C2410_GPDDAT	   S3C2410_GPIOREG(0x34)
+#define S3C2410_GPDUP	   S3C2410_GPIOREG(0x38)
+
+#define S3C2400_GPDCON	   S3C2410_GPIOREG(0x20)
+#define S3C2400_GPDDAT	   S3C2410_GPIOREG(0x24)
+#define S3C2400_GPDUP	   S3C2410_GPIOREG(0x28)
+
+#define S3C2410_GPD0            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
+#define S3C2410_GPD0_INP	(0x00 << 0)
+#define S3C2410_GPD0_OUTP	(0x01 << 0)
+#define S3C2410_GPD0_VD8	(0x02 << 0)
+#define S3C2400_GPD0_VFRAME	(0x02 << 0)
+#define S3C2442_GPD0_nSPICS1	(0x03 << 0)
+
+#define S3C2410_GPD1            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
+#define S3C2410_GPD1_INP	(0x00 << 2)
+#define S3C2410_GPD1_OUTP	(0x01 << 2)
+#define S3C2410_GPD1_VD9	(0x02 << 2)
+#define S3C2400_GPD1_VM		(0x02 << 2)
+#define S3C2442_GPD1_SPICLK1	(0x03 << 2)
+
+#define S3C2410_GPD2            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
+#define S3C2410_GPD2_INP	(0x00 << 4)
+#define S3C2410_GPD2_OUTP	(0x01 << 4)
+#define S3C2410_GPD2_VD10	(0x02 << 4)
+#define S3C2400_GPD2_VLINE	(0x02 << 4)
+
+#define S3C2410_GPD3            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
+#define S3C2410_GPD3_INP	(0x00 << 6)
+#define S3C2410_GPD3_OUTP	(0x01 << 6)
+#define S3C2410_GPD3_VD11	(0x02 << 6)
+#define S3C2400_GPD3_VCLK	(0x02 << 6)
+
+#define S3C2410_GPD4            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
+#define S3C2410_GPD4_INP	(0x00 << 8)
+#define S3C2410_GPD4_OUTP	(0x01 << 8)
+#define S3C2410_GPD4_VD12	(0x02 << 8)
+#define S3C2400_GPD4_LEND	(0x02 << 8)
+
+#define S3C2410_GPD5            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
+#define S3C2410_GPD5_INP	(0x00 << 10)
+#define S3C2410_GPD5_OUTP	(0x01 << 10)
+#define S3C2410_GPD5_VD13	(0x02 << 10)
+#define S3C2400_GPD5_TOUT0	(0x02 << 10)
+
+#define S3C2410_GPD6            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
+#define S3C2410_GPD6_INP	(0x00 << 12)
+#define S3C2410_GPD6_OUTP	(0x01 << 12)
+#define S3C2410_GPD6_VD14	(0x02 << 12)
+#define S3C2400_GPD6_TOUT1	(0x02 << 12)
+
+#define S3C2410_GPD7            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
+#define S3C2410_GPD7_INP	(0x00 << 14)
+#define S3C2410_GPD7_OUTP	(0x01 << 14)
+#define S3C2410_GPD7_VD15	(0x02 << 14)
+#define S3C2400_GPD7_TOUT2	(0x02 << 14)
+
+#define S3C2410_GPD8            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
+#define S3C2410_GPD8_INP	(0x00 << 16)
+#define S3C2410_GPD8_OUTP	(0x01 << 16)
+#define S3C2410_GPD8_VD16	(0x02 << 16)
+#define S3C2400_GPD8_TOUT3	(0x02 << 16)
+
+#define S3C2410_GPD9            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
+#define S3C2410_GPD9_INP	(0x00 << 18)
+#define S3C2410_GPD9_OUTP	(0x01 << 18)
+#define S3C2410_GPD9_VD17	(0x02 << 18)
+#define S3C2400_GPD9_TCLK0	(0x02 << 18)
+#define S3C2410_GPD9_MASK       (0x03 << 18)
+
+#define S3C2410_GPD10           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
+#define S3C2410_GPD10_INP	(0x00 << 20)
+#define S3C2410_GPD10_OUTP	(0x01 << 20)
+#define S3C2410_GPD10_VD18	(0x02 << 20)
+#define S3C2400_GPD10_nWAIT	(0x02 << 20)
+
+#define S3C2410_GPD11           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
+#define S3C2410_GPD11_INP	(0x00 << 22)
+#define S3C2410_GPD11_OUTP	(0x01 << 22)
+#define S3C2410_GPD11_VD19	(0x02 << 22)
+
+#define S3C2410_GPD12           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
+#define S3C2410_GPD12_INP	(0x00 << 24)
+#define S3C2410_GPD12_OUTP	(0x01 << 24)
+#define S3C2410_GPD12_VD20	(0x02 << 24)
+
+#define S3C2410_GPD13           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
+#define S3C2410_GPD13_INP	(0x00 << 26)
+#define S3C2410_GPD13_OUTP	(0x01 << 26)
+#define S3C2410_GPD13_VD21	(0x02 << 26)
+
+#define S3C2410_GPD14           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
+#define S3C2410_GPD14_INP	(0x00 << 28)
+#define S3C2410_GPD14_OUTP	(0x01 << 28)
+#define S3C2410_GPD14_VD22	(0x02 << 28)
+#define S3C2410_GPD14_nSS1	(0x03 << 28)
+
+#define S3C2410_GPD15           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
+#define S3C2410_GPD15_INP	(0x00 << 30)
+#define S3C2410_GPD15_OUTP	(0x01 << 30)
+#define S3C2410_GPD15_VD23	(0x02 << 30)
+#define S3C2410_GPD15_nSS0	(0x03 << 30)
+
+#define S3C2410_GPD_PUPDIS(x)  (1<<(x))
+
+/* S3C2410:
+ * Port E consists of 16 GPIO/Special function
+ *
+ * again, the same as port B, but dealing with I2S, SDI, and
+ * more miscellaneous functions
+ *
+ * S3C2400:
+ * Port E consists of 12 GPIO/Special function
+ *
+ * GPIO / interrupt inputs
+*/
+
+#define S3C2410_GPECON	   S3C2410_GPIOREG(0x40)
+#define S3C2410_GPEDAT	   S3C2410_GPIOREG(0x44)
+#define S3C2410_GPEUP	   S3C2410_GPIOREG(0x48)
+
+#define S3C2400_GPECON	   S3C2410_GPIOREG(0x2C)
+#define S3C2400_GPEDAT	   S3C2410_GPIOREG(0x30)
+#define S3C2400_GPEUP	   S3C2410_GPIOREG(0x34)
+
+#define S3C2410_GPE0           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
+#define S3C2410_GPE0_INP       (0x00 << 0)
+#define S3C2410_GPE0_OUTP      (0x01 << 0)
+#define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
+#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
+#define S3C2400_GPE0_EINT0     (0x02 << 0)
+#define S3C2410_GPE0_MASK      (0x03 << 0)
+
+#define S3C2410_GPE1           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
+#define S3C2410_GPE1_INP       (0x00 << 2)
+#define S3C2410_GPE1_OUTP      (0x01 << 2)
+#define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
+#define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
+#define S3C2400_GPE1_EINT1     (0x02 << 2)
+#define S3C2400_GPE1_nSS       (0x03 << 2)
+#define S3C2410_GPE1_MASK      (0x03 << 2)
+
+#define S3C2410_GPE2           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
+#define S3C2410_GPE2_INP       (0x00 << 4)
+#define S3C2410_GPE2_OUTP      (0x01 << 4)
+#define S3C2410_GPE2_CDCLK     (0x02 << 4)
+#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
+#define S3C2400_GPE2_EINT2     (0x02 << 4)
+#define S3C2400_GPE2_I2SSDI    (0x03 << 4)
+
+#define S3C2410_GPE3           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
+#define S3C2410_GPE3_INP       (0x00 << 6)
+#define S3C2410_GPE3_OUTP      (0x01 << 6)
+#define S3C2410_GPE3_I2SSDI    (0x02 << 6)
+#define S3C2443_GPE3_AC_SDI    (0x03 << 6)
+#define S3C2400_GPE3_EINT3     (0x02 << 6)
+#define S3C2400_GPE3_nCTS1     (0x03 << 6)
+#define S3C2410_GPE3_nSS0      (0x03 << 6)
+#define S3C2410_GPE3_MASK      (0x03 << 6)
+
+#define S3C2410_GPE4           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
+#define S3C2410_GPE4_INP       (0x00 << 8)
+#define S3C2410_GPE4_OUTP      (0x01 << 8)
+#define S3C2410_GPE4_I2SSDO    (0x02 << 8)
+#define S3C2443_GPE4_AC_SDO    (0x03 << 8)
+#define S3C2400_GPE4_EINT4     (0x02 << 8)
+#define S3C2400_GPE4_nRTS1     (0x03 << 8)
+#define S3C2410_GPE4_I2SSDI    (0x03 << 8)
+#define S3C2410_GPE4_MASK      (0x03 << 8)
+
+#define S3C2410_GPE5           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
+#define S3C2410_GPE5_INP       (0x00 << 10)
+#define S3C2410_GPE5_OUTP      (0x01 << 10)
+#define S3C2410_GPE5_SDCLK     (0x02 << 10)
+#define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
+#define S3C2400_GPE5_EINT5     (0x02 << 10)
+#define S3C2400_GPE5_TCLK1     (0x03 << 10)
+
+#define S3C2410_GPE6           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
+#define S3C2410_GPE6_INP       (0x00 << 12)
+#define S3C2410_GPE6_OUTP      (0x01 << 12)
+#define S3C2410_GPE6_SDCMD     (0x02 << 12)
+#define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
+#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
+#define S3C2400_GPE6_EINT6     (0x02 << 12)
+
+#define S3C2410_GPE7           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
+#define S3C2410_GPE7_INP       (0x00 << 14)
+#define S3C2410_GPE7_OUTP      (0x01 << 14)
+#define S3C2410_GPE7_SDDAT0    (0x02 << 14)
+#define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
+#define S3C2443_GPE7_AC_SDI    (0x03 << 14)
+#define S3C2400_GPE7_EINT7     (0x02 << 14)
+
+#define S3C2410_GPE8           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
+#define S3C2410_GPE8_INP       (0x00 << 16)
+#define S3C2410_GPE8_OUTP      (0x01 << 16)
+#define S3C2410_GPE8_SDDAT1    (0x02 << 16)
+#define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
+#define S3C2443_GPE8_AC_SDO    (0x03 << 16)
+#define S3C2400_GPE8_nXDACK0   (0x02 << 16)
+
+#define S3C2410_GPE9           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
+#define S3C2410_GPE9_INP       (0x00 << 18)
+#define S3C2410_GPE9_OUTP      (0x01 << 18)
+#define S3C2410_GPE9_SDDAT2    (0x02 << 18)
+#define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
+#define S3C2443_GPE9_AC_SYNC   (0x03 << 18)
+#define S3C2400_GPE9_nXDACK1   (0x02 << 18)
+#define S3C2400_GPE9_nXBACK    (0x03 << 18)
+
+#define S3C2410_GPE10          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
+#define S3C2410_GPE10_INP      (0x00 << 20)
+#define S3C2410_GPE10_OUTP     (0x01 << 20)
+#define S3C2410_GPE10_SDDAT3   (0x02 << 20)
+#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
+#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
+#define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
+
+#define S3C2410_GPE11          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
+#define S3C2410_GPE11_INP      (0x00 << 22)
+#define S3C2410_GPE11_OUTP     (0x01 << 22)
+#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
+#define S3C2400_GPE11_nXDREQ1  (0x02 << 22)
+#define S3C2400_GPE11_nXBREQ   (0x03 << 22)
+
+#define S3C2410_GPE12          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
+#define S3C2410_GPE12_INP      (0x00 << 24)
+#define S3C2410_GPE12_OUTP     (0x01 << 24)
+#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
+
+#define S3C2410_GPE13          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
+#define S3C2410_GPE13_INP      (0x00 << 26)
+#define S3C2410_GPE13_OUTP     (0x01 << 26)
+#define S3C2410_GPE13_SPICLK0  (0x02 << 26)
+
+#define S3C2410_GPE14          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
+#define S3C2410_GPE14_INP      (0x00 << 28)
+#define S3C2410_GPE14_OUTP     (0x01 << 28)
+#define S3C2410_GPE14_IICSCL   (0x02 << 28)
+#define S3C2410_GPE14_MASK     (0x03 << 28)
+
+#define S3C2410_GPE15          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
+#define S3C2410_GPE15_INP      (0x00 << 30)
+#define S3C2410_GPE15_OUTP     (0x01 << 30)
+#define S3C2410_GPE15_IICSDA   (0x02 << 30)
+#define S3C2410_GPE15_MASK     (0x03 << 30)
+
+#define S3C2440_GPE0_ACSYNC    (0x03 << 0)
+#define S3C2440_GPE1_ACBITCLK  (0x03 << 2)
+#define S3C2440_GPE2_ACRESET   (0x03 << 4)
+#define S3C2440_GPE3_ACIN      (0x03 << 6)
+#define S3C2440_GPE4_ACOUT     (0x03 << 8)
+
+#define S3C2410_GPE_PUPDIS(x)  (1<<(x))
+
+/* S3C2410:
+ * Port F consists of 8 GPIO/Special function
+ *
+ * GPIO / interrupt inputs
+ *
+ * GPFCON has 2 bits for each of the input pins on port F
+ *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
+ *
+ * pull up works like all other ports.
+ *
+ * S3C2400:
+ * Port F consists of 7 GPIO/Special function
+ *
+ * GPIO/serial/misc pins
+*/
+
+#define S3C2410_GPFCON	   S3C2410_GPIOREG(0x50)
+#define S3C2410_GPFDAT	   S3C2410_GPIOREG(0x54)
+#define S3C2410_GPFUP	   S3C2410_GPIOREG(0x58)
+
+#define S3C2400_GPFCON	   S3C2410_GPIOREG(0x38)
+#define S3C2400_GPFDAT	   S3C2410_GPIOREG(0x3C)
+#define S3C2400_GPFUP	   S3C2410_GPIOREG(0x40)
+
+#define S3C2410_GPF0        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
+#define S3C2410_GPF0_INP    (0x00 << 0)
+#define S3C2410_GPF0_OUTP   (0x01 << 0)
+#define S3C2410_GPF0_EINT0  (0x02 << 0)
+#define S3C2400_GPF0_RXD0   (0x02 << 0)
+
+#define S3C2410_GPF1        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
+#define S3C2410_GPF1_INP    (0x00 << 2)
+#define S3C2410_GPF1_OUTP   (0x01 << 2)
+#define S3C2410_GPF1_EINT1  (0x02 << 2)
+#define S3C2400_GPF1_RXD1   (0x02 << 2)
+#define S3C2400_GPF1_IICSDA (0x03 << 2)
+
+#define S3C2410_GPF2        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
+#define S3C2410_GPF2_INP    (0x00 << 4)
+#define S3C2410_GPF2_OUTP   (0x01 << 4)
+#define S3C2410_GPF2_EINT2  (0x02 << 4)
+#define S3C2400_GPF2_TXD0   (0x02 << 4)
+
+#define S3C2410_GPF3        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
+#define S3C2410_GPF3_INP    (0x00 << 6)
+#define S3C2410_GPF3_OUTP   (0x01 << 6)
+#define S3C2410_GPF3_EINT3  (0x02 << 6)
+#define S3C2400_GPF3_TXD1   (0x02 << 6)
+#define S3C2400_GPF3_IICSCL (0x03 << 6)
+
+#define S3C2410_GPF4        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
+#define S3C2410_GPF4_INP    (0x00 << 8)
+#define S3C2410_GPF4_OUTP   (0x01 << 8)
+#define S3C2410_GPF4_EINT4  (0x02 << 8)
+#define S3C2400_GPF4_nRTS0  (0x02 << 8)
+#define S3C2400_GPF4_nXBACK (0x03 << 8)
+
+#define S3C2410_GPF5        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
+#define S3C2410_GPF5_INP    (0x00 << 10)
+#define S3C2410_GPF5_OUTP   (0x01 << 10)
+#define S3C2410_GPF5_EINT5  (0x02 << 10)
+#define S3C2400_GPF5_nCTS0  (0x02 << 10)
+#define S3C2400_GPF5_nXBREQ (0x03 << 10)
+
+#define S3C2410_GPF6        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
+#define S3C2410_GPF6_INP    (0x00 << 12)
+#define S3C2410_GPF6_OUTP   (0x01 << 12)
+#define S3C2410_GPF6_EINT6  (0x02 << 12)
+#define S3C2400_GPF6_CLKOUT (0x02 << 12)
+
+#define S3C2410_GPF7        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
+#define S3C2410_GPF7_INP    (0x00 << 14)
+#define S3C2410_GPF7_OUTP   (0x01 << 14)
+#define S3C2410_GPF7_EINT7  (0x02 << 14)
+
+#define S3C2410_GPF_PUPDIS(x)  (1<<(x))
+
+/* S3C2410:
+ * Port G consists of 8 GPIO/IRQ/Special function
+ *
+ * GPGCON has 2 bits for each of the input pins on port F
+ *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
+ *
+ * pull up works like all other ports.
+ *
+ * S3C2400:
+ * Port G consists of 10 GPIO/Special function
+*/
+
+#define S3C2410_GPGCON	   S3C2410_GPIOREG(0x60)
+#define S3C2410_GPGDAT	   S3C2410_GPIOREG(0x64)
+#define S3C2410_GPGUP	   S3C2410_GPIOREG(0x68)
+
+#define S3C2400_GPGCON	   S3C2410_GPIOREG(0x44)
+#define S3C2400_GPGDAT	   S3C2410_GPIOREG(0x48)
+#define S3C2400_GPGUP	   S3C2410_GPIOREG(0x4C)
+
+#define S3C2410_GPG0          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
+#define S3C2410_GPG0_INP      (0x00 << 0)
+#define S3C2410_GPG0_OUTP     (0x01 << 0)
+#define S3C2410_GPG0_EINT8    (0x02 << 0)
+#define S3C2400_GPG0_I2SLRCK  (0x02 << 0)
+
+#define S3C2410_GPG1          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
+#define S3C2410_GPG1_INP      (0x00 << 2)
+#define S3C2410_GPG1_OUTP     (0x01 << 2)
+#define S3C2410_GPG1_EINT9    (0x02 << 2)
+#define S3C2400_GPG1_I2SSCLK  (0x02 << 2)
+
+#define S3C2410_GPG2          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
+#define S3C2410_GPG2_INP      (0x00 << 4)
+#define S3C2410_GPG2_OUTP     (0x01 << 4)
+#define S3C2410_GPG2_EINT10   (0x02 << 4)
+#define S3C2410_GPG2_nSS0     (0x03 << 4)
+#define S3C2400_GPG2_CDCLK    (0x02 << 4)
+
+#define S3C2410_GPG3          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
+#define S3C2410_GPG3_INP      (0x00 << 6)
+#define S3C2410_GPG3_OUTP     (0x01 << 6)
+#define S3C2410_GPG3_EINT11   (0x02 << 6)
+#define S3C2410_GPG3_nSS1     (0x03 << 6)
+#define S3C2400_GPG3_I2SSDO   (0x02 << 6)
+#define S3C2400_GPG3_I2SSDI   (0x03 << 6)
+
+#define S3C2410_GPG4          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
+#define S3C2410_GPG4_INP      (0x00 << 8)
+#define S3C2410_GPG4_OUTP     (0x01 << 8)
+#define S3C2410_GPG4_EINT12   (0x02 << 8)
+#define S3C2400_GPG4_MMCCLK   (0x02 << 8)
+#define S3C2400_GPG4_I2SSDI   (0x03 << 8)
+#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
+#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
+
+#define S3C2410_GPG5          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
+#define S3C2410_GPG5_INP      (0x00 << 10)
+#define S3C2410_GPG5_OUTP     (0x01 << 10)
+#define S3C2410_GPG5_EINT13   (0x02 << 10)
+#define S3C2400_GPG5_MMCCMD   (0x02 << 10)
+#define S3C2400_GPG5_IICSDA   (0x03 << 10)
+#define S3C2410_GPG5_SPIMISO1 (0x03 << 10)	/* not s3c2443 */
+
+#define S3C2410_GPG6          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
+#define S3C2410_GPG6_INP      (0x00 << 12)
+#define S3C2410_GPG6_OUTP     (0x01 << 12)
+#define S3C2410_GPG6_EINT14   (0x02 << 12)
+#define S3C2400_GPG6_MMCDAT   (0x02 << 12)
+#define S3C2400_GPG6_IICSCL   (0x03 << 12)
+#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
+
+#define S3C2410_GPG7          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
+#define S3C2410_GPG7_INP      (0x00 << 14)
+#define S3C2410_GPG7_OUTP     (0x01 << 14)
+#define S3C2410_GPG7_EINT15   (0x02 << 14)
+#define S3C2410_GPG7_SPICLK1  (0x03 << 14)
+#define S3C2400_GPG7_SPIMISO  (0x02 << 14)
+#define S3C2400_GPG7_IICSDA   (0x03 << 14)
+
+#define S3C2410_GPG8          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
+#define S3C2410_GPG8_INP      (0x00 << 16)
+#define S3C2410_GPG8_OUTP     (0x01 << 16)
+#define S3C2410_GPG8_EINT16   (0x02 << 16)
+#define S3C2400_GPG8_SPIMOSI  (0x02 << 16)
+#define S3C2400_GPG8_IICSCL   (0x03 << 16)
+
+#define S3C2410_GPG9          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
+#define S3C2410_GPG9_INP      (0x00 << 18)
+#define S3C2410_GPG9_OUTP     (0x01 << 18)
+#define S3C2410_GPG9_EINT17   (0x02 << 18)
+#define S3C2400_GPG9_SPICLK   (0x02 << 18)
+#define S3C2400_GPG9_MMCCLK   (0x03 << 18)
+
+#define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
+#define S3C2410_GPG10_INP     (0x00 << 20)
+#define S3C2410_GPG10_OUTP    (0x01 << 20)
+#define S3C2410_GPG10_EINT18  (0x02 << 20)
+
+#define S3C2410_GPG11         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
+#define S3C2410_GPG11_INP     (0x00 << 22)
+#define S3C2410_GPG11_OUTP    (0x01 << 22)
+#define S3C2410_GPG11_EINT19  (0x02 << 22)
+#define S3C2410_GPG11_TCLK1   (0x03 << 22)
+#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
+
+#define S3C2410_GPG12         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
+#define S3C2410_GPG12_INP     (0x00 << 24)
+#define S3C2410_GPG12_OUTP    (0x01 << 24)
+#define S3C2410_GPG12_EINT20  (0x02 << 24)
+#define S3C2410_GPG12_XMON    (0x03 << 24)
+#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
+#define S3C2443_GPG12_nINPACK (0x03 << 24)
+
+#define S3C2410_GPG13         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
+#define S3C2410_GPG13_INP     (0x00 << 26)
+#define S3C2410_GPG13_OUTP    (0x01 << 26)
+#define S3C2410_GPG13_EINT21  (0x02 << 26)
+#define S3C2410_GPG13_nXPON   (0x03 << 26)
+#define S3C2443_GPG13_CF_nREG (0x03 << 26)
+
+#define S3C2410_GPG14         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
+#define S3C2410_GPG14_INP     (0x00 << 28)
+#define S3C2410_GPG14_OUTP    (0x01 << 28)
+#define S3C2410_GPG14_EINT22  (0x02 << 28)
+#define S3C2410_GPG14_YMON    (0x03 << 28)
+#define S3C2443_GPG14_CF_RESET (0x03 << 28)
+
+#define S3C2410_GPG15         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
+#define S3C2410_GPG15_INP     (0x00 << 30)
+#define S3C2410_GPG15_OUTP    (0x01 << 30)
+#define S3C2410_GPG15_EINT23  (0x02 << 30)
+#define S3C2410_GPG15_nYPON   (0x03 << 30)
+#define S3C2443_GPG15_CF_PWR  (0x03 << 30)
+
+#define S3C2410_GPG_PUPDIS(x)  (1<<(x))
+
+/* Port H consists of11 GPIO/serial/Misc pins
+ *
+ * GPGCON has 2 bits for each of the input pins on port F
+ *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2410_GPHCON	   S3C2410_GPIOREG(0x70)
+#define S3C2410_GPHDAT	   S3C2410_GPIOREG(0x74)
+#define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
+
+#define S3C2410_GPH0        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
+#define S3C2410_GPH0_INP    (0x00 << 0)
+#define S3C2410_GPH0_OUTP   (0x01 << 0)
+#define S3C2410_GPH0_nCTS0  (0x02 << 0)
+
+#define S3C2410_GPH1        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
+#define S3C2410_GPH1_INP    (0x00 << 2)
+#define S3C2410_GPH1_OUTP   (0x01 << 2)
+#define S3C2410_GPH1_nRTS0  (0x02 << 2)
+
+#define S3C2410_GPH2        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
+#define S3C2410_GPH2_INP    (0x00 << 4)
+#define S3C2410_GPH2_OUTP   (0x01 << 4)
+#define S3C2410_GPH2_TXD0   (0x02 << 4)
+
+#define S3C2410_GPH3        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
+#define S3C2410_GPH3_INP    (0x00 << 6)
+#define S3C2410_GPH3_OUTP   (0x01 << 6)
+#define S3C2410_GPH3_RXD0   (0x02 << 6)
+
+#define S3C2410_GPH4        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
+#define S3C2410_GPH4_INP    (0x00 << 8)
+#define S3C2410_GPH4_OUTP   (0x01 << 8)
+#define S3C2410_GPH4_TXD1   (0x02 << 8)
+
+#define S3C2410_GPH5        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
+#define S3C2410_GPH5_INP    (0x00 << 10)
+#define S3C2410_GPH5_OUTP   (0x01 << 10)
+#define S3C2410_GPH5_RXD1   (0x02 << 10)
+
+#define S3C2410_GPH6        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
+#define S3C2410_GPH6_INP    (0x00 << 12)
+#define S3C2410_GPH6_OUTP   (0x01 << 12)
+#define S3C2410_GPH6_TXD2   (0x02 << 12)
+#define S3C2410_GPH6_nRTS1  (0x03 << 12)
+
+#define S3C2410_GPH7        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
+#define S3C2410_GPH7_INP    (0x00 << 14)
+#define S3C2410_GPH7_OUTP   (0x01 << 14)
+#define S3C2410_GPH7_RXD2   (0x02 << 14)
+#define S3C2410_GPH7_nCTS1  (0x03 << 14)
+
+#define S3C2410_GPH8        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
+#define S3C2410_GPH8_INP    (0x00 << 16)
+#define S3C2410_GPH8_OUTP   (0x01 << 16)
+#define S3C2410_GPH8_UCLK   (0x02 << 16)
+
+#define S3C2410_GPH9          S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
+#define S3C2410_GPH9_INP      (0x00 << 18)
+#define S3C2410_GPH9_OUTP     (0x01 << 18)
+#define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
+#define S3C2442_GPH9_nSPICS0  (0x03 << 18)
+
+#define S3C2410_GPH10         S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
+#define S3C2410_GPH10_INP     (0x00 << 20)
+#define S3C2410_GPH10_OUTP    (0x01 << 20)
+#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
+
+/* The S3C2412 and S3C2413 move the GPJ register set to after
+ * GPH, which means all registers after 0x80 are now offset by 0x10
+ * for the 2412/2413 from the 2410/2440/2442
+*/
+
+/* miscellaneous control */
+#define S3C2400_MISCCR	   S3C2410_GPIOREG(0x54)
+#define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
+#define S3C2410_DCLKCON	   S3C2410_GPIOREG(0x84)
+
+#define S3C24XX_DCLKCON	   S3C24XX_GPIOREG2(0x84)
+
+/* see clock.h for dclk definitions */
+
+/* pullup control on databus */
+#define S3C2410_MISCCR_SPUCR_HEN    (0<<0)
+#define S3C2410_MISCCR_SPUCR_HDIS   (1<<0)
+#define S3C2410_MISCCR_SPUCR_LEN    (0<<1)
+#define S3C2410_MISCCR_SPUCR_LDIS   (1<<1)
+
+#define S3C2400_MISCCR_SPUCR_LEN    (0<<0)
+#define S3C2400_MISCCR_SPUCR_LDIS   (1<<0)
+#define S3C2400_MISCCR_SPUCR_HEN    (0<<1)
+#define S3C2400_MISCCR_SPUCR_HDIS   (1<<1)
+
+#define S3C2400_MISCCR_HZ_STOPEN    (0<<2)
+#define S3C2400_MISCCR_HZ_STOPPREV  (1<<2)
+
+#define S3C2410_MISCCR_USBDEV	    (0<<3)
+#define S3C2410_MISCCR_USBHOST	    (1<<3)
+
+#define S3C2410_MISCCR_CLK0_MPLL    (0<<4)
+#define S3C2410_MISCCR_CLK0_UPLL    (1<<4)
+#define S3C2410_MISCCR_CLK0_FCLK    (2<<4)
+#define S3C2410_MISCCR_CLK0_HCLK    (3<<4)
+#define S3C2410_MISCCR_CLK0_PCLK    (4<<4)
+#define S3C2410_MISCCR_CLK0_DCLK0   (5<<4)
+#define S3C2410_MISCCR_CLK0_MASK    (7<<4)
+
+#define S3C2412_MISCCR_CLK0_RTC	    (2<<4)
+
+#define S3C2410_MISCCR_CLK1_MPLL    (0<<8)
+#define S3C2410_MISCCR_CLK1_UPLL    (1<<8)
+#define S3C2410_MISCCR_CLK1_FCLK    (2<<8)
+#define S3C2410_MISCCR_CLK1_HCLK    (3<<8)
+#define S3C2410_MISCCR_CLK1_PCLK    (4<<8)
+#define S3C2410_MISCCR_CLK1_DCLK1   (5<<8)
+#define S3C2410_MISCCR_CLK1_MASK    (7<<8)
+
+#define S3C2412_MISCCR_CLK1_CLKsrc  (0<<8)
+
+#define S3C2410_MISCCR_USBSUSPND0   (1<<12)
+#define S3C2410_MISCCR_USBSUSPND1   (1<<13)
+
+#define S3C2410_MISCCR_nRSTCON	    (1<<16)
+
+#define S3C2410_MISCCR_nEN_SCLK0    (1<<17)
+#define S3C2410_MISCCR_nEN_SCLK1    (1<<18)
+#define S3C2410_MISCCR_nEN_SCLKE    (1<<19)	/* not 2412 */
+#define S3C2410_MISCCR_SDSLEEP	    (7<<17)
+
+/* external interrupt control... */
+/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
+ * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
+ * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23
+ *
+ * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23
+ *
+ * Samsung datasheet p9-25
+*/
+#define S3C2400_EXTINT0    S3C2410_GPIOREG(0x58)
+#define S3C2410_EXTINT0	   S3C2410_GPIOREG(0x88)
+#define S3C2410_EXTINT1	   S3C2410_GPIOREG(0x8C)
+#define S3C2410_EXTINT2	   S3C2410_GPIOREG(0x90)
+
+#define S3C24XX_EXTINT0	   S3C24XX_GPIOREG2(0x88)
+#define S3C24XX_EXTINT1	   S3C24XX_GPIOREG2(0x8C)
+#define S3C24XX_EXTINT2	   S3C24XX_GPIOREG2(0x90)
+
+/* values for S3C2410_EXTINT0/1/2 */
+#define S3C2410_EXTINT_LOWLEV	 (0x00)
+#define S3C2410_EXTINT_HILEV	 (0x01)
+#define S3C2410_EXTINT_FALLEDGE	 (0x02)
+#define S3C2410_EXTINT_RISEEDGE	 (0x04)
+#define S3C2410_EXTINT_BOTHEDGE	 (0x06)
+
+/* interrupt filtering conrrol for EINT16..EINT23 */
+#define S3C2410_EINFLT0	   S3C2410_GPIOREG(0x94)
+#define S3C2410_EINFLT1	   S3C2410_GPIOREG(0x98)
+#define S3C2410_EINFLT2	   S3C2410_GPIOREG(0x9C)
+#define S3C2410_EINFLT3	   S3C2410_GPIOREG(0xA0)
+
+#define S3C24XX_EINFLT0	   S3C24XX_GPIOREG2(0x94)
+#define S3C24XX_EINFLT1	   S3C24XX_GPIOREG2(0x98)
+#define S3C24XX_EINFLT2	   S3C24XX_GPIOREG2(0x9C)
+#define S3C24XX_EINFLT3	   S3C24XX_GPIOREG2(0xA0)
+
+/* values for interrupt filtering */
+#define S3C2410_EINTFLT_PCLK		(0x00)
+#define S3C2410_EINTFLT_EXTCLK		(1<<7)
+#define S3C2410_EINTFLT_WIDTHMSK(x)	((x) & 0x3f)
+
+/* removed EINTxxxx defs from here, not meant for this */
+
+/* GSTATUS have miscellaneous information in them
+ *
+ * These move between s3c2410 and s3c2412 style systems.
+ */
+
+#define S3C2410_GSTATUS0   S3C2410_GPIOREG(0x0AC)
+#define S3C2410_GSTATUS1   S3C2410_GPIOREG(0x0B0)
+#define S3C2410_GSTATUS2   S3C2410_GPIOREG(0x0B4)
+#define S3C2410_GSTATUS3   S3C2410_GPIOREG(0x0B8)
+#define S3C2410_GSTATUS4   S3C2410_GPIOREG(0x0BC)
+
+#define S3C2412_GSTATUS0   S3C2410_GPIOREG(0x0BC)
+#define S3C2412_GSTATUS1   S3C2410_GPIOREG(0x0C0)
+#define S3C2412_GSTATUS2   S3C2410_GPIOREG(0x0C4)
+#define S3C2412_GSTATUS3   S3C2410_GPIOREG(0x0C8)
+#define S3C2412_GSTATUS4   S3C2410_GPIOREG(0x0CC)
+
+#define S3C24XX_GSTATUS0   S3C24XX_GPIOREG2(0x0AC)
+#define S3C24XX_GSTATUS1   S3C24XX_GPIOREG2(0x0B0)
+#define S3C24XX_GSTATUS2   S3C24XX_GPIOREG2(0x0B4)
+#define S3C24XX_GSTATUS3   S3C24XX_GPIOREG2(0x0B8)
+#define S3C24XX_GSTATUS4   S3C24XX_GPIOREG2(0x0BC)
+
+#define S3C2410_GSTATUS0_nWAIT	   (1<<3)
+#define S3C2410_GSTATUS0_NCON	   (1<<2)
+#define S3C2410_GSTATUS0_RnB	   (1<<1)
+#define S3C2410_GSTATUS0_nBATTFLT  (1<<0)
+
+#define S3C2410_GSTATUS1_IDMASK	   (0xffff0000)
+#define S3C2410_GSTATUS1_2410	   (0x32410000)
+#define S3C2410_GSTATUS1_2412	   (0x32412001)
+#define S3C2410_GSTATUS1_2440	   (0x32440000)
+#define S3C2410_GSTATUS1_2442	   (0x32440aaa)
+
+#define S3C2410_GSTATUS2_WTRESET   (1<<2)
+#define S3C2410_GSTATUS2_OFFRESET  (1<<1)
+#define S3C2410_GSTATUS2_PONRESET  (1<<0)
+
+/* open drain control register */
+#define S3C2400_OPENCR     S3C2410_GPIOREG(0x50)
+
+#define S3C2400_OPENCR_OPC_RXD1DIS  (0<<0)
+#define S3C2400_OPENCR_OPC_RXD1EN   (1<<0)
+#define S3C2400_OPENCR_OPC_TXD1DIS  (0<<1)
+#define S3C2400_OPENCR_OPC_TXD1EN   (1<<1)
+#define S3C2400_OPENCR_OPC_CMDDIS   (0<<2)
+#define S3C2400_OPENCR_OPC_CMDEN    (1<<2)
+#define S3C2400_OPENCR_OPC_DATDIS   (0<<3)
+#define S3C2400_OPENCR_OPC_DATEN    (1<<3)
+#define S3C2400_OPENCR_OPC_MISODIS  (0<<4)
+#define S3C2400_OPENCR_OPC_MISOEN   (1<<4)
+#define S3C2400_OPENCR_OPC_MOSIDIS  (0<<5)
+#define S3C2400_OPENCR_OPC_MOSIEN   (1<<5)
+
+/* 2412/2413 sleep configuration registers */
+
+#define S3C2412_GPBSLPCON	S3C2410_GPIOREG(0x1C)
+#define S3C2412_GPCSLPCON	S3C2410_GPIOREG(0x2C)
+#define S3C2412_GPDSLPCON	S3C2410_GPIOREG(0x3C)
+#define S3C2412_GPFSLPCON	S3C2410_GPIOREG(0x5C)
+#define S3C2412_GPGSLPCON	S3C2410_GPIOREG(0x6C)
+#define S3C2412_GPHSLPCON	S3C2410_GPIOREG(0x7C)
+
+/* definitions for each pin bit */
+#define S3C2412_GPIO_SLPCON_LOW	 ( 0x00 )
+#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 )
+#define S3C2412_GPIO_SLPCON_IN   ( 0x02 )
+#define S3C2412_GPIO_SLPCON_PULL ( 0x03 )
+
+#define S3C2412_SLPCON_LOW(x)	( 0x00 << ((x) * 2))
+#define S3C2412_SLPCON_HIGH(x)	( 0x01 << ((x) * 2))
+#define S3C2412_SLPCON_IN(x)	( 0x02 << ((x) * 2))
+#define S3C2412_SLPCON_PULL(x)	( 0x03 << ((x) * 2))
+#define S3C2412_SLPCON_EINT(x)	( 0x02 << ((x) * 2))  /* only IRQ pins */
+#define S3C2412_SLPCON_MASK(x)	( 0x03 << ((x) * 2))
+
+#define S3C2412_SLPCON_ALL_LOW	(0x0)
+#define S3C2412_SLPCON_ALL_HIGH	(0x11111111 | 0x44444444)
+#define S3C2412_SLPCON_ALL_IN  	(0x22222222 | 0x88888888)
+#define S3C2412_SLPCON_ALL_PULL	(0x33333333)
+
+#endif	/* __ASM_ARCH_REGS_GPIO_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
new file mode 100644
index 0000000..1202ca5
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
@@ -0,0 +1,106 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2440 GPIO J register definitions
+*/
+
+
+#ifndef __ASM_ARCH_REGS_GPIOJ_H
+#define __ASM_ARCH_REGS_GPIOJ_H "gpioj"
+
+/* Port J consists of 13 GPIO/Camera pins
+ *
+ * GPJCON has 2 bits for each of the input pins on port F
+ *   00 = 0 input, 1 output, 2 Camera
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2440_GPIO_BANKJ  (416)
+
+#define S3C2440_GPJCON	    S3C2410_GPIOREG(0xd0)
+#define S3C2440_GPJDAT	    S3C2410_GPIOREG(0xd4)
+#define S3C2440_GPJUP	    S3C2410_GPIOREG(0xd8)
+
+#define S3C2413_GPJCON		S3C2410_GPIOREG(0x80)
+#define S3C2413_GPJDAT		S3C2410_GPIOREG(0x84)
+#define S3C2413_GPJUP		S3C2410_GPIOREG(0x88)
+#define S3C2413_GPJSLPCON	S3C2410_GPIOREG(0x8C)
+
+#define S3C2440_GPJ0            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0)
+#define S3C2440_GPJ0_INP        (0x00 << 0)
+#define S3C2440_GPJ0_OUTP       (0x01 << 0)
+#define S3C2440_GPJ0_CAMDATA0   (0x02 << 0)
+
+#define S3C2440_GPJ1            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 1)
+#define S3C2440_GPJ1_INP        (0x00 << 2)
+#define S3C2440_GPJ1_OUTP       (0x01 << 2)
+#define S3C2440_GPJ1_CAMDATA1   (0x02 << 2)
+
+#define S3C2440_GPJ2            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 2)
+#define S3C2440_GPJ2_INP        (0x00 << 4)
+#define S3C2440_GPJ2_OUTP       (0x01 << 4)
+#define S3C2440_GPJ2_CAMDATA2   (0x02 << 4)
+
+#define S3C2440_GPJ3            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 3)
+#define S3C2440_GPJ3_INP        (0x00 << 6)
+#define S3C2440_GPJ3_OUTP       (0x01 << 6)
+#define S3C2440_GPJ3_CAMDATA3   (0x02 << 6)
+
+#define S3C2440_GPJ4            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 4)
+#define S3C2440_GPJ4_INP        (0x00 << 8)
+#define S3C2440_GPJ4_OUTP       (0x01 << 8)
+#define S3C2440_GPJ4_CAMDATA4   (0x02 << 8)
+
+#define S3C2440_GPJ5            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 5)
+#define S3C2440_GPJ5_INP        (0x00 << 10)
+#define S3C2440_GPJ5_OUTP       (0x01 << 10)
+#define S3C2440_GPJ5_CAMDATA5   (0x02 << 10)
+
+#define S3C2440_GPJ6            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 6)
+#define S3C2440_GPJ6_INP        (0x00 << 12)
+#define S3C2440_GPJ6_OUTP       (0x01 << 12)
+#define S3C2440_GPJ6_CAMDATA6   (0x02 << 12)
+
+#define S3C2440_GPJ7            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 7)
+#define S3C2440_GPJ7_INP        (0x00 << 14)
+#define S3C2440_GPJ7_OUTP       (0x01 << 14)
+#define S3C2440_GPJ7_CAMDATA7   (0x02 << 14)
+
+#define S3C2440_GPJ8            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 8)
+#define S3C2440_GPJ8_INP        (0x00 << 16)
+#define S3C2440_GPJ8_OUTP       (0x01 << 16)
+#define S3C2440_GPJ8_CAMPCLK    (0x02 << 16)
+
+#define S3C2440_GPJ9            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 9)
+#define S3C2440_GPJ9_INP        (0x00 << 18)
+#define S3C2440_GPJ9_OUTP       (0x01 << 18)
+#define S3C2440_GPJ9_CAMVSYNC   (0x02 << 18)
+
+#define S3C2440_GPJ10           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 10)
+#define S3C2440_GPJ10_INP       (0x00 << 20)
+#define S3C2440_GPJ10_OUTP      (0x01 << 20)
+#define S3C2440_GPJ10_CAMHREF   (0x02 << 20)
+
+#define S3C2440_GPJ11           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 11)
+#define S3C2440_GPJ11_INP       (0x00 << 22)
+#define S3C2440_GPJ11_OUTP      (0x01 << 22)
+#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22)
+
+#define S3C2440_GPJ12           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 12)
+#define S3C2440_GPJ12_INP       (0x00 << 24)
+#define S3C2440_GPJ12_OUTP      (0x01 << 24)
+#define S3C2440_GPJ12_CAMRESET  (0x02 << 24)
+
+#define S3C2443_GPJ13		S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 13)
+#define S3C2443_GPJ14		S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 14)
+#define S3C2443_GPJ15		S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 15)
+
+#endif	/* __ASM_ARCH_REGS_GPIOJ_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-irq.h b/arch/arm/mach-s3c2410/include/mach/regs-irq.h
new file mode 100644
index 0000000..b057c06
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-irq.h
@@ -0,0 +1,43 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifndef ___ASM_ARCH_REGS_IRQ_H
+#define ___ASM_ARCH_REGS_IRQ_H "$Id: irq.h,v 1.3 2003/03/25 21:29:06 ben Exp $"
+
+/* interrupt controller */
+
+#define S3C2410_IRQREG(x)   ((x) + S3C24XX_VA_IRQ)
+#define S3C2410_EINTREG(x)  ((x) + S3C24XX_VA_GPIO)
+#define S3C24XX_EINTREG(x)  ((x) + S3C24XX_VA_GPIO2)
+
+#define S3C2410_SRCPND	       S3C2410_IRQREG(0x000)
+#define S3C2410_INTMOD	       S3C2410_IRQREG(0x004)
+#define S3C2410_INTMSK	       S3C2410_IRQREG(0x008)
+#define S3C2410_PRIORITY       S3C2410_IRQREG(0x00C)
+#define S3C2410_INTPND	       S3C2410_IRQREG(0x010)
+#define S3C2410_INTOFFSET      S3C2410_IRQREG(0x014)
+#define S3C2410_SUBSRCPND      S3C2410_IRQREG(0x018)
+#define S3C2410_INTSUBMSK      S3C2410_IRQREG(0x01C)
+
+/* mask: 0=enable, 1=disable
+ * 1 bit EINT, 4=EINT4, 23=EINT23
+ * EINT0,1,2,3 are not handled here.
+*/
+
+#define S3C2410_EINTMASK       S3C2410_EINTREG(0x0A4)
+#define S3C2410_EINTPEND       S3C2410_EINTREG(0X0A8)
+#define S3C2412_EINTMASK       S3C2410_EINTREG(0x0B4)
+#define S3C2412_EINTPEND       S3C2410_EINTREG(0X0B8)
+
+#define S3C24XX_EINTMASK       S3C24XX_EINTREG(0x0A4)
+#define S3C24XX_EINTPEND       S3C24XX_EINTREG(0X0A8)
+
+#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-lcd.h b/arch/arm/mach-s3c2410/include/mach/regs-lcd.h
new file mode 100644
index 0000000..893b874
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-lcd.h
@@ -0,0 +1,162 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-lcd.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifndef ___ASM_ARCH_REGS_LCD_H
+#define ___ASM_ARCH_REGS_LCD_H "$Id: lcd.h,v 1.3 2003/06/26 13:25:06 ben Exp $"
+
+#define S3C2410_LCDREG(x)	(x)
+
+/* LCD control registers */
+#define S3C2410_LCDCON1	    S3C2410_LCDREG(0x00)
+#define S3C2410_LCDCON2	    S3C2410_LCDREG(0x04)
+#define S3C2410_LCDCON3	    S3C2410_LCDREG(0x08)
+#define S3C2410_LCDCON4	    S3C2410_LCDREG(0x0C)
+#define S3C2410_LCDCON5	    S3C2410_LCDREG(0x10)
+
+#define S3C2410_LCDCON1_CLKVAL(x)  ((x) << 8)
+#define S3C2410_LCDCON1_MMODE	   (1<<7)
+#define S3C2410_LCDCON1_DSCAN4	   (0<<5)
+#define S3C2410_LCDCON1_STN4	   (1<<5)
+#define S3C2410_LCDCON1_STN8	   (2<<5)
+#define S3C2410_LCDCON1_TFT	   (3<<5)
+
+#define S3C2410_LCDCON1_STN1BPP	   (0<<1)
+#define S3C2410_LCDCON1_STN2GREY   (1<<1)
+#define S3C2410_LCDCON1_STN4GREY   (2<<1)
+#define S3C2410_LCDCON1_STN8BPP	   (3<<1)
+#define S3C2410_LCDCON1_STN12BPP   (4<<1)
+
+#define S3C2410_LCDCON1_TFT1BPP	   (8<<1)
+#define S3C2410_LCDCON1_TFT2BPP	   (9<<1)
+#define S3C2410_LCDCON1_TFT4BPP	   (10<<1)
+#define S3C2410_LCDCON1_TFT8BPP	   (11<<1)
+#define S3C2410_LCDCON1_TFT16BPP   (12<<1)
+#define S3C2410_LCDCON1_TFT24BPP   (13<<1)
+
+#define S3C2410_LCDCON1_ENVID	   (1)
+
+#define S3C2410_LCDCON1_MODEMASK    0x1E
+
+#define S3C2410_LCDCON2_VBPD(x)	    ((x) << 24)
+#define S3C2410_LCDCON2_LINEVAL(x)  ((x) << 14)
+#define S3C2410_LCDCON2_VFPD(x)	    ((x) << 6)
+#define S3C2410_LCDCON2_VSPW(x)	    ((x) << 0)
+
+#define S3C2410_LCDCON2_GET_VBPD(x) ( ((x) >> 24) & 0xFF)
+#define S3C2410_LCDCON2_GET_VFPD(x) ( ((x) >>  6) & 0xFF)
+#define S3C2410_LCDCON2_GET_VSPW(x) ( ((x) >>  0) & 0x3F)
+
+#define S3C2410_LCDCON3_HBPD(x)	    ((x) << 19)
+#define S3C2410_LCDCON3_WDLY(x)	    ((x) << 19)
+#define S3C2410_LCDCON3_HOZVAL(x)   ((x) << 8)
+#define S3C2410_LCDCON3_HFPD(x)	    ((x) << 0)
+#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0)
+
+#define S3C2410_LCDCON3_GET_HBPD(x) ( ((x) >> 19) & 0x7F)
+#define S3C2410_LCDCON3_GET_HFPD(x) ( ((x) >>  0) & 0xFF)
+
+/* LDCCON4 changes for STN mode on the S3C2412 */
+
+#define S3C2410_LCDCON4_MVAL(x)	    ((x) << 8)
+#define S3C2410_LCDCON4_HSPW(x)	    ((x) << 0)
+#define S3C2410_LCDCON4_WLH(x)	    ((x) << 0)
+
+#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >>  0) & 0xFF)
+
+#define S3C2410_LCDCON5_BPP24BL	    (1<<12)
+#define S3C2410_LCDCON5_FRM565	    (1<<11)
+#define S3C2410_LCDCON5_INVVCLK	    (1<<10)
+#define S3C2410_LCDCON5_INVVLINE    (1<<9)
+#define S3C2410_LCDCON5_INVVFRAME   (1<<8)
+#define S3C2410_LCDCON5_INVVD	    (1<<7)
+#define S3C2410_LCDCON5_INVVDEN	    (1<<6)
+#define S3C2410_LCDCON5_INVPWREN    (1<<5)
+#define S3C2410_LCDCON5_INVLEND	    (1<<4)
+#define S3C2410_LCDCON5_PWREN	    (1<<3)
+#define S3C2410_LCDCON5_ENLEND	    (1<<2)
+#define S3C2410_LCDCON5_BSWP	    (1<<1)
+#define S3C2410_LCDCON5_HWSWP	    (1<<0)
+
+/* framebuffer start addressed */
+#define S3C2410_LCDSADDR1   S3C2410_LCDREG(0x14)
+#define S3C2410_LCDSADDR2   S3C2410_LCDREG(0x18)
+#define S3C2410_LCDSADDR3   S3C2410_LCDREG(0x1C)
+
+#define S3C2410_LCDBANK(x)	((x) << 21)
+#define S3C2410_LCDBASEU(x)	(x)
+
+#define S3C2410_OFFSIZE(x)	((x) << 11)
+#define S3C2410_PAGEWIDTH(x)	(x)
+
+/* colour lookup and miscellaneous controls */
+
+#define S3C2410_REDLUT	   S3C2410_LCDREG(0x20)
+#define S3C2410_GREENLUT   S3C2410_LCDREG(0x24)
+#define S3C2410_BLUELUT	   S3C2410_LCDREG(0x28)
+
+#define S3C2410_DITHMODE   S3C2410_LCDREG(0x4C)
+#define S3C2410_TPAL	   S3C2410_LCDREG(0x50)
+
+#define S3C2410_TPAL_EN		(1<<24)
+
+/* interrupt info */
+#define S3C2410_LCDINTPND  S3C2410_LCDREG(0x54)
+#define S3C2410_LCDSRCPND  S3C2410_LCDREG(0x58)
+#define S3C2410_LCDINTMSK  S3C2410_LCDREG(0x5C)
+#define S3C2410_LCDINT_FIWSEL	(1<<2)
+#define	S3C2410_LCDINT_FRSYNC	(1<<1)
+#define S3C2410_LCDINT_FICNT	(1<<0)
+
+/* s3c2442 extra stn registers */
+
+#define S3C2442_REDLUT		S3C2410_LCDREG(0x20)
+#define S3C2442_GREENLUT	S3C2410_LCDREG(0x24)
+#define S3C2442_BLUELUT		S3C2410_LCDREG(0x28)
+#define S3C2442_DITHMODE	S3C2410_LCDREG(0x20)
+
+#define S3C2410_LPCSEL	   S3C2410_LCDREG(0x60)
+
+#define S3C2410_TFTPAL(x)  S3C2410_LCDREG((0x400 + (x)*4))
+
+/* S3C2412 registers */
+
+#define S3C2412_TPAL		S3C2410_LCDREG(0x20)
+
+#define S3C2412_LCDINTPND	S3C2410_LCDREG(0x24)
+#define S3C2412_LCDSRCPND	S3C2410_LCDREG(0x28)
+#define S3C2412_LCDINTMSK	S3C2410_LCDREG(0x2C)
+
+#define S3C2412_TCONSEL		S3C2410_LCDREG(0x30)
+
+#define S3C2412_LCDCON6		S3C2410_LCDREG(0x34)
+#define S3C2412_LCDCON7		S3C2410_LCDREG(0x38)
+#define S3C2412_LCDCON8		S3C2410_LCDREG(0x3C)
+#define S3C2412_LCDCON9		S3C2410_LCDREG(0x40)
+
+#define S3C2412_REDLUT(x)	S3C2410_LCDREG(0x44 + ((x)*4))
+#define S3C2412_GREENLUT(x)	S3C2410_LCDREG(0x60 + ((x)*4))
+#define S3C2412_BLUELUT(x)	S3C2410_LCDREG(0x98 + ((x)*4))
+
+#define S3C2412_FRCPAT(x)	S3C2410_LCDREG(0xB4 + ((x)*4))
+
+/* general registers */
+
+/* base of the LCD registers, where INTPND, INTSRC and then INTMSK
+ * are available. */
+
+#define S3C2410_LCDINTBASE	S3C2410_LCDREG(0x54)
+#define S3C2412_LCDINTBASE	S3C2410_LCDREG(0x24)
+
+#define S3C24XX_LCDINTPND	(0x00)
+#define S3C24XX_LCDSRCPND	(0x04)
+#define S3C24XX_LCDINTMSK	(0x08)
+
+#endif /* ___ASM_ARCH_REGS_LCD_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
new file mode 100644
index 0000000..f9926ab
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
@@ -0,0 +1,220 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-mem.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Memory Control register definitions
+*/
+
+#ifndef __ASM_ARM_MEMREGS_H
+#define __ASM_ARM_MEMREGS_H "$Id: regs.h,v 1.8 2003/05/01 15:55:41 ben Exp $"
+
+#ifndef S3C2410_MEMREG
+#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
+#endif
+
+/* bus width, and wait state control */
+#define S3C2410_BWSCON			S3C2410_MEMREG(0x0000)
+
+/* bank zero config - note, pinstrapped from OM pins! */
+#define S3C2410_BWSCON_DW0_16		(1<<1)
+#define S3C2410_BWSCON_DW0_32		(2<<1)
+
+/* bank one configs */
+#define S3C2410_BWSCON_DW1_8		(0<<4)
+#define S3C2410_BWSCON_DW1_16		(1<<4)
+#define S3C2410_BWSCON_DW1_32		(2<<4)
+#define S3C2410_BWSCON_WS1		(1<<6)
+#define S3C2410_BWSCON_ST1		(1<<7)
+
+/* bank 2 configurations */
+#define S3C2410_BWSCON_DW2_8		(0<<8)
+#define S3C2410_BWSCON_DW2_16		(1<<8)
+#define S3C2410_BWSCON_DW2_32		(2<<8)
+#define S3C2410_BWSCON_WS2		(1<<10)
+#define S3C2410_BWSCON_ST2		(1<<11)
+
+/* bank 3 configurations */
+#define S3C2410_BWSCON_DW3_8		(0<<12)
+#define S3C2410_BWSCON_DW3_16		(1<<12)
+#define S3C2410_BWSCON_DW3_32		(2<<12)
+#define S3C2410_BWSCON_WS3		(1<<14)
+#define S3C2410_BWSCON_ST3		(1<<15)
+
+/* bank 4 configurations */
+#define S3C2410_BWSCON_DW4_8		(0<<16)
+#define S3C2410_BWSCON_DW4_16		(1<<16)
+#define S3C2410_BWSCON_DW4_32		(2<<16)
+#define S3C2410_BWSCON_WS4		(1<<18)
+#define S3C2410_BWSCON_ST4		(1<<19)
+
+/* bank 5 configurations */
+#define S3C2410_BWSCON_DW5_8		(0<<20)
+#define S3C2410_BWSCON_DW5_16		(1<<20)
+#define S3C2410_BWSCON_DW5_32		(2<<20)
+#define S3C2410_BWSCON_WS5		(1<<22)
+#define S3C2410_BWSCON_ST5		(1<<23)
+
+/* bank 6 configurations */
+#define S3C2410_BWSCON_DW6_8		(0<<24)
+#define S3C2410_BWSCON_DW6_16		(1<<24)
+#define S3C2410_BWSCON_DW6_32		(2<<24)
+#define S3C2410_BWSCON_WS6		(1<<26)
+#define S3C2410_BWSCON_ST6		(1<<27)
+
+/* bank 7 configurations */
+#define S3C2410_BWSCON_DW7_8		(0<<28)
+#define S3C2410_BWSCON_DW7_16		(1<<28)
+#define S3C2410_BWSCON_DW7_32		(2<<28)
+#define S3C2410_BWSCON_WS7		(1<<30)
+#define S3C2410_BWSCON_ST7		(1<<31)
+
+/* memory set (rom, ram) */
+#define S3C2410_BANKCON0		S3C2410_MEMREG(0x0004)
+#define S3C2410_BANKCON1		S3C2410_MEMREG(0x0008)
+#define S3C2410_BANKCON2		S3C2410_MEMREG(0x000C)
+#define S3C2410_BANKCON3		S3C2410_MEMREG(0x0010)
+#define S3C2410_BANKCON4		S3C2410_MEMREG(0x0014)
+#define S3C2410_BANKCON5		S3C2410_MEMREG(0x0018)
+#define S3C2410_BANKCON6		S3C2410_MEMREG(0x001C)
+#define S3C2410_BANKCON7		S3C2410_MEMREG(0x0020)
+
+/* bank configuration registers */
+
+#define S3C2410_BANKCON_PMCnorm		(0x00)
+#define S3C2410_BANKCON_PMC4		(0x01)
+#define S3C2410_BANKCON_PMC8		(0x02)
+#define S3C2410_BANKCON_PMC16		(0x03)
+
+/* bank configurations for banks 0..7, note banks
+ * 6 and 7 have differnt configurations depending on
+ * the memory type bits */
+
+#define S3C2410_BANKCON_Tacp2		(0x0 << 2)
+#define S3C2410_BANKCON_Tacp3		(0x1 << 2)
+#define S3C2410_BANKCON_Tacp4		(0x2 << 2)
+#define S3C2410_BANKCON_Tacp6		(0x3 << 2)
+#define S3C2410_BANKCON_Tacp_SHIFT	(2)
+
+#define S3C2410_BANKCON_Tcah0		(0x0 << 4)
+#define S3C2410_BANKCON_Tcah1		(0x1 << 4)
+#define S3C2410_BANKCON_Tcah2		(0x2 << 4)
+#define S3C2410_BANKCON_Tcah4		(0x3 << 4)
+#define S3C2410_BANKCON_Tcah_SHIFT	(4)
+
+#define S3C2410_BANKCON_Tcoh0		(0x0 << 6)
+#define S3C2410_BANKCON_Tcoh1		(0x1 << 6)
+#define S3C2410_BANKCON_Tcoh2		(0x2 << 6)
+#define S3C2410_BANKCON_Tcoh4		(0x3 << 6)
+#define S3C2410_BANKCON_Tcoh_SHIFT	(6)
+
+#define S3C2410_BANKCON_Tacc1		(0x0 << 8)
+#define S3C2410_BANKCON_Tacc2		(0x1 << 8)
+#define S3C2410_BANKCON_Tacc3		(0x2 << 8)
+#define S3C2410_BANKCON_Tacc4		(0x3 << 8)
+#define S3C2410_BANKCON_Tacc6		(0x4 << 8)
+#define S3C2410_BANKCON_Tacc8		(0x5 << 8)
+#define S3C2410_BANKCON_Tacc10		(0x6 << 8)
+#define S3C2410_BANKCON_Tacc14		(0x7 << 8)
+#define S3C2410_BANKCON_Tacc_SHIFT	(8)
+
+#define S3C2410_BANKCON_Tcos0		(0x0 << 11)
+#define S3C2410_BANKCON_Tcos1		(0x1 << 11)
+#define S3C2410_BANKCON_Tcos2		(0x2 << 11)
+#define S3C2410_BANKCON_Tcos4		(0x3 << 11)
+#define S3C2410_BANKCON_Tcos_SHIFT	(11)
+
+#define S3C2410_BANKCON_Tacs0		(0x0 << 13)
+#define S3C2410_BANKCON_Tacs1		(0x1 << 13)
+#define S3C2410_BANKCON_Tacs2		(0x2 << 13)
+#define S3C2410_BANKCON_Tacs4		(0x3 << 13)
+#define S3C2410_BANKCON_Tacs_SHIFT	(13)
+
+#define S3C2410_BANKCON_SRAM		(0x0 << 15)
+#define S3C2400_BANKCON_EDODRAM		(0x2 << 15)
+#define S3C2410_BANKCON_SDRAM		(0x3 << 15)
+
+/* next bits only for EDO DRAM in 6,7 */
+#define S3C2400_BANKCON_EDO_Trcd1      (0x00 << 4)
+#define S3C2400_BANKCON_EDO_Trcd2      (0x01 << 4)
+#define S3C2400_BANKCON_EDO_Trcd3      (0x02 << 4)
+#define S3C2400_BANKCON_EDO_Trcd4      (0x03 << 4)
+
+/* CAS pulse width */
+#define S3C2400_BANKCON_EDO_PULSE1     (0x00 << 3)
+#define S3C2400_BANKCON_EDO_PULSE2     (0x01 << 3)
+
+/* CAS pre-charge */
+#define S3C2400_BANKCON_EDO_TCP1       (0x00 << 2)
+#define S3C2400_BANKCON_EDO_TCP2       (0x01 << 2)
+
+/* control column address select */
+#define S3C2400_BANKCON_EDO_SCANb8     (0x00 << 0)
+#define S3C2400_BANKCON_EDO_SCANb9     (0x01 << 0)
+#define S3C2400_BANKCON_EDO_SCANb10    (0x02 << 0)
+#define S3C2400_BANKCON_EDO_SCANb11    (0x03 << 0)
+
+/* next bits only for SDRAM in 6,7 */
+#define S3C2410_BANKCON_Trcd2		(0x00 << 2)
+#define S3C2410_BANKCON_Trcd3		(0x01 << 2)
+#define S3C2410_BANKCON_Trcd4		(0x02 << 2)
+
+/* control column address select */
+#define S3C2410_BANKCON_SCANb8		(0x00 << 0)
+#define S3C2410_BANKCON_SCANb9		(0x01 << 0)
+#define S3C2410_BANKCON_SCANb10		(0x02 << 0)
+
+#define S3C2410_REFRESH			S3C2410_MEMREG(0x0024)
+#define S3C2410_BANKSIZE		S3C2410_MEMREG(0x0028)
+#define S3C2410_MRSRB6			S3C2410_MEMREG(0x002C)
+#define S3C2410_MRSRB7			S3C2410_MEMREG(0x0030)
+
+/* refresh control */
+
+#define S3C2410_REFRESH_REFEN		(1<<23)
+#define S3C2410_REFRESH_SELF		(1<<22)
+#define S3C2410_REFRESH_REFCOUNTER	((1<<11)-1)
+
+#define S3C2410_REFRESH_TRP_MASK	(3<<20)
+#define S3C2410_REFRESH_TRP_2clk	(0<<20)
+#define S3C2410_REFRESH_TRP_3clk	(1<<20)
+#define S3C2410_REFRESH_TRP_4clk	(2<<20)
+
+#define S3C2400_REFRESH_DRAM_TRP_MASK   (3<<20)
+#define S3C2400_REFRESH_DRAM_TRP_1_5clk (0<<20)
+#define S3C2400_REFRESH_DRAM_TRP_2_5clk (1<<20)
+#define S3C2400_REFRESH_DRAM_TRP_3_5clk (2<<20)
+#define S3C2400_REFRESH_DRAM_TRP_4_5clk (3<<20)
+
+#define S3C2410_REFRESH_TSRC_MASK	(3<<18)
+#define S3C2410_REFRESH_TSRC_4clk	(0<<18)
+#define S3C2410_REFRESH_TSRC_5clk	(1<<18)
+#define S3C2410_REFRESH_TSRC_6clk	(2<<18)
+#define S3C2410_REFRESH_TSRC_7clk	(3<<18)
+
+
+/* mode select register(s) */
+
+#define  S3C2410_MRSRB_CL1		(0x00 << 4)
+#define  S3C2410_MRSRB_CL2		(0x02 << 4)
+#define  S3C2410_MRSRB_CL3		(0x03 << 4)
+
+/* bank size register */
+#define S3C2410_BANKSIZE_128M		(0x2 << 0)
+#define S3C2410_BANKSIZE_64M		(0x1 << 0)
+#define S3C2410_BANKSIZE_32M		(0x0 << 0)
+#define S3C2410_BANKSIZE_16M		(0x7 << 0)
+#define S3C2410_BANKSIZE_8M		(0x6 << 0)
+#define S3C2410_BANKSIZE_4M		(0x5 << 0)
+#define S3C2410_BANKSIZE_2M		(0x4 << 0)
+#define S3C2410_BANKSIZE_MASK		(0x7 << 0)
+#define S3C2400_BANKSIZE_MASK           (0x4 << 0)
+#define S3C2410_BANKSIZE_SCLK_EN	(1<<4)
+#define S3C2410_BANKSIZE_SCKE_EN	(1<<5)
+#define S3C2410_BANKSIZE_BURST		(1<<7)
+
+#endif /* __ASM_ARM_MEMREGS_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-power.h b/arch/arm/mach-s3c2410/include/mach/regs-power.h
new file mode 100644
index 0000000..2d36353
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-power.h
@@ -0,0 +1,40 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-power.h
+ *
+ * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C24XX power control register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_PWR
+#define __ASM_ARM_REGS_PWR __FILE__
+
+#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2412_PWRMODECON	S3C24XX_PWRREG(0x20)
+#define S3C2412_PWRCFG		S3C24XX_PWRREG(0x24)
+
+#define S3C2412_INFORM0		S3C24XX_PWRREG(0x70)
+#define S3C2412_INFORM1		S3C24XX_PWRREG(0x74)
+#define S3C2412_INFORM2		S3C24XX_PWRREG(0x78)
+#define S3C2412_INFORM3		S3C24XX_PWRREG(0x7C)
+
+#define S3C2412_PWRCFG_BATF_IRQ			(1<<0)
+#define S3C2412_PWRCFG_BATF_IGNORE		(2<<0)
+#define S3C2412_PWRCFG_BATF_SLEEP		(3<<0)
+#define S3C2412_PWRCFG_BATF_MASK		(3<<0)
+
+#define S3C2412_PWRCFG_STANDBYWFI_IGNORE	(0<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_IDLE		(1<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_STOP		(2<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_SLEEP		(3<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_MASK		(3<<6)
+
+#define S3C2412_PWRCFG_RTC_MASKIRQ		(1<<8)
+#define S3C2412_PWRCFG_NAND_NORST		(1<<9)
+
+#endif /* __ASM_ARM_REGS_PWR */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
new file mode 100644
index 0000000..a4bf271
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
@@ -0,0 +1,29 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2412 memory register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_S3C2412_MEM
+#define __ASM_ARM_REGS_S3C2412_MEM
+
+#ifndef S3C2412_MEMREG
+#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
+#endif
+
+#define S3C2412_BANKCFG			S3C2412_MEMREG(0x00)
+#define S3C2412_BANKCON1		S3C2412_MEMREG(0x04)
+#define S3C2412_BANKCON2		S3C2412_MEMREG(0x08)
+#define S3C2412_BANKCON3		S3C2412_MEMREG(0x0C)
+
+#define S3C2412_REFRESH			S3C2412_MEMREG(0x10)
+#define S3C2412_TIMEOUT			S3C2412_MEMREG(0x14)
+
+#endif /*  __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
new file mode 100644
index 0000000..aa69dc7
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
@@ -0,0 +1,23 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
+ *
+ * Copyright 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2412 specific register definitions
+*/
+
+#ifndef __ASM_ARCH_REGS_S3C2412_H
+#define __ASM_ARCH_REGS_S3C2412_H "s3c2412"
+
+#define S3C2412_SWRST		(S3C24XX_VA_CLKPWR + 0x30)
+#define S3C2412_SWRST_RESET	(0x533C2412)
+
+/* see regs-power.h for the other registers in the power block. */
+
+#endif	/* __ASM_ARCH_REGS_S3C2412_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
new file mode 100644
index 0000000..7dd4583
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
@@ -0,0 +1,195 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2443 clock register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_S3C2443_CLOCK
+#define __ASM_ARM_REGS_S3C2443_CLOCK
+
+#define S3C2443_CLKREG(x)		((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2443_PLLCON_MDIVSHIFT	16
+#define S3C2443_PLLCON_PDIVSHIFT	8
+#define S3C2443_PLLCON_SDIVSHIFT	0
+#define S3C2443_PLLCON_MDIVMASK		((1<<(1+(23-16)))-1)
+#define S3C2443_PLLCON_PDIVMASK		((1<<(1+(9-8)))-1)
+#define S3C2443_PLLCON_SDIVMASK		(3)
+
+#define S3C2443_MPLLCON			S3C2443_CLKREG(0x10)
+#define S3C2443_EPLLCON			S3C2443_CLKREG(0x18)
+#define S3C2443_CLKSRC			S3C2443_CLKREG(0x20)
+#define S3C2443_CLKDIV0			S3C2443_CLKREG(0x24)
+#define S3C2443_CLKDIV1			S3C2443_CLKREG(0x28)
+#define S3C2443_HCLKCON			S3C2443_CLKREG(0x30)
+#define S3C2443_PCLKCON			S3C2443_CLKREG(0x34)
+#define S3C2443_SCLKCON			S3C2443_CLKREG(0x38)
+#define S3C2443_PWRMODE			S3C2443_CLKREG(0x40)
+#define S3C2443_SWRST			S3C2443_CLKREG(0x44)
+#define S3C2443_BUSPRI0			S3C2443_CLKREG(0x50)
+#define S3C2443_SYSID			S3C2443_CLKREG(0x5C)
+#define S3C2443_PWRCFG			S3C2443_CLKREG(0x60)
+#define S3C2443_RSTCON			S3C2443_CLKREG(0x64)
+
+#define S3C2443_SWRST_RESET		(0x533c2443)
+
+#define S3C2443_PLLCON_OFF		(1<<24)
+
+#define S3C2443_CLKSRC_I2S_EXT		(1<<14)
+#define S3C2443_CLKSRC_I2S_EPLLDIV	(0<<14)
+#define S3C2443_CLKSRC_I2S_EPLLREF	(2<<14)
+#define S3C2443_CLKSRC_I2S_EPLLREF3	(3<<14)
+#define S3C2443_CLKSRC_I2S_MASK		(3<<14)
+
+#define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<8)
+#define S3C2443_CLKSRC_EPLLREF_EXTCLK	(3<<8)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF	(0<<8)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF2	(1<<8)
+#define S3C2443_CLKSRC_EPLLREF_MASK	(3<<8)
+
+#define S3C2443_CLKSRC_ESYSCLK_EPLL	(1<<6)
+#define S3C2443_CLKSRC_MSYSCLK_MPLL	(1<<4)
+#define S3C2443_CLKSRC_EXTCLK_DIV	(1<<3)
+
+#define S3C2443_CLKDIV0_DVS		(1<<13)
+#define S3C2443_CLKDIV0_HALF_HCLK	(1<<3)
+#define S3C2443_CLKDIV0_HALF_PCLK	(1<<2)
+
+#define S3C2443_CLKDIV0_HCLKDIV_MASK	(3<<0)
+
+#define S3C2443_CLKDIV0_EXTDIV_MASK	(3<<6)
+#define S3C2443_CLKDIV0_EXTDIV_SHIFT	(6)
+
+#define S3C2443_CLKDIV0_PREDIV_MASK	(3<<4)
+#define S3C2443_CLKDIV0_PREDIV_SHIFT	(4)
+
+#define S3C2443_CLKDIV0_ARMDIV_MASK	(15<<9)
+#define S3C2443_CLKDIV0_ARMDIV_SHIFT	(9)
+#define S3C2443_CLKDIV0_ARMDIV_1	(0<<9)
+#define S3C2443_CLKDIV0_ARMDIV_2	(8<<9)
+#define S3C2443_CLKDIV0_ARMDIV_3	(2<<9)
+#define S3C2443_CLKDIV0_ARMDIV_4	(9<<9)
+#define S3C2443_CLKDIV0_ARMDIV_6	(10<<9)
+#define S3C2443_CLKDIV0_ARMDIV_8	(11<<9)
+#define S3C2443_CLKDIV0_ARMDIV_12	(13<<9)
+#define S3C2443_CLKDIV0_ARMDIV_16	(15<<9)
+
+/* S3C2443_CLKDIV1 */
+
+#define S3C2443_CLKDIV1_CAMDIV_MASK	(15<<26)
+#define S3C2443_CLKDIV1_CAMDIV_SHIFT	(26)
+
+#define S3C2443_CLKDIV1_HSSPIDIV_MASK	(3<<24)
+#define S3C2443_CLKDIV1_HSSPIDIV_SHIFT	(24)
+
+#define S3C2443_CLKDIV1_DISPDIV_MASK	(0xff<<16)
+#define S3C2443_CLKDIV1_DISPDIV_SHIFT	(16)
+
+#define S3C2443_CLKDIV1_I2SDIV_MASK	(15<<12)
+#define S3C2443_CLKDIV1_I2SDIV_SHIFT	(12)
+
+#define S3C2443_CLKDIV1_UARTDIV_MASK	(15<<8)
+#define S3C2443_CLKDIV1_UARTDIV_SHIFT	(8)
+
+#define S3C2443_CLKDIV1_HSMMCDIV_MASK	(3<<6)
+#define S3C2443_CLKDIV1_HSMMCDIV_SHIFT	(6)
+
+#define S3C2443_CLKDIV1_USBHOSTDIV_MASK	(3<<4)
+#define S3C2443_CLKDIV1_USBHOSTDIV_SHIFT (4)
+
+#define S3C2443_CLKCON_NAND
+
+#define S3C2443_HCLKCON_DMA0		(1<<0)
+#define S3C2443_HCLKCON_DMA1		(1<<1)
+#define S3C2443_HCLKCON_DMA2		(1<<2)
+#define S3C2443_HCLKCON_DMA3		(1<<3)
+#define S3C2443_HCLKCON_DMA4		(1<<4)
+#define S3C2443_HCLKCON_DMA5		(1<<5)
+#define S3C2443_HCLKCON_CAMIF		(1<<8)
+#define S3C2443_HCLKCON_DISP		(1<<9)
+#define S3C2443_HCLKCON_LCDC		(1<<10)
+#define S3C2443_HCLKCON_USBH		(1<<11)
+#define S3C2443_HCLKCON_USBD		(1<<12)
+#define S3C2443_HCLKCON_HSMMC		(1<<16)
+#define S3C2443_HCLKCON_CFC		(1<<17)
+#define S3C2443_HCLKCON_SSMC		(1<<18)
+#define S3C2443_HCLKCON_DRAMC		(1<<19)
+
+#define S3C2443_PCLKCON_UART0		(1<<0)
+#define S3C2443_PCLKCON_UART1		(1<<1)
+#define S3C2443_PCLKCON_UART2		(1<<2)
+#define S3C2443_PCLKCON_UART3		(1<<3)
+#define S3C2443_PCLKCON_IIC		(1<<4)
+#define S3C2443_PCLKCON_SDI		(1<<5)
+#define S3C2443_PCLKCON_ADC		(1<<7)
+#define S3C2443_PCLKCON_AC97		(1<<8)
+#define S3C2443_PCLKCON_IIS		(1<<9)
+#define S3C2443_PCLKCON_PWMT		(1<<10)
+#define S3C2443_PCLKCON_WDT		(1<<11)
+#define S3C2443_PCLKCON_RTC		(1<<12)
+#define S3C2443_PCLKCON_GPIO		(1<<13)
+#define S3C2443_PCLKCON_SPI0		(1<<14)
+#define S3C2443_PCLKCON_SPI1		(1<<15)
+
+#define S3C2443_SCLKCON_DDRCLK		(1<<16)
+#define S3C2443_SCLKCON_SSMCCLK		(1<<15)
+#define S3C2443_SCLKCON_HSSPICLK	(1<<14)
+#define S3C2443_SCLKCON_HSMMCCLK_EXT	(1<<13)
+#define S3C2443_SCLKCON_HSMMCCLK_EPLL	(1<<12)
+#define S3C2443_SCLKCON_CAMCLK		(1<<11)
+#define S3C2443_SCLKCON_DISPCLK		(1<<10)
+#define S3C2443_SCLKCON_I2SCLK		(1<<9)
+#define S3C2443_SCLKCON_UARTCLK		(1<<8)
+#define S3C2443_SCLKCON_USBHOST		(1<<1)
+
+#include <asm/div64.h>
+
+static inline unsigned int
+s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
+	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
+	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
+
+	mdiv &= S3C2443_PLLCON_MDIVMASK;
+	pdiv &= S3C2443_PLLCON_PDIVMASK;
+	sdiv &= S3C2443_PLLCON_SDIVMASK;
+
+	fvco = (uint64_t)baseclk * (2 * (mdiv + 8));
+	do_div(fvco, pdiv << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+static inline unsigned int
+s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
+	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
+	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
+
+	mdiv &= S3C2443_PLLCON_MDIVMASK;
+	pdiv &= S3C2443_PLLCON_PDIVMASK;
+	sdiv &= S3C2443_PLLCON_SDIVMASK;
+
+	fvco = (uint64_t)baseclk * (mdiv + 8);
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+#endif /*  __ASM_ARM_REGS_S3C2443_CLOCK */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-sdi.h b/arch/arm/mach-s3c2410/include/mach/regs-sdi.h
new file mode 100644
index 0000000..cbf2d88
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-sdi.h
@@ -0,0 +1,127 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-sdi.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 MMC/SDIO register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_SDI
+#define __ASM_ARM_REGS_SDI "regs-sdi.h"
+
+#define S3C2410_SDICON                (0x00)
+#define S3C2410_SDIPRE                (0x04)
+#define S3C2410_SDICMDARG             (0x08)
+#define S3C2410_SDICMDCON             (0x0C)
+#define S3C2410_SDICMDSTAT            (0x10)
+#define S3C2410_SDIRSP0               (0x14)
+#define S3C2410_SDIRSP1               (0x18)
+#define S3C2410_SDIRSP2               (0x1C)
+#define S3C2410_SDIRSP3               (0x20)
+#define S3C2410_SDITIMER              (0x24)
+#define S3C2410_SDIBSIZE              (0x28)
+#define S3C2410_SDIDCON               (0x2C)
+#define S3C2410_SDIDCNT               (0x30)
+#define S3C2410_SDIDSTA               (0x34)
+#define S3C2410_SDIFSTA               (0x38)
+
+#define S3C2410_SDIDATA               (0x3C)
+#define S3C2410_SDIIMSK               (0x40)
+
+#define S3C2440_SDIDATA               (0x40)
+#define S3C2440_SDIIMSK               (0x3C)
+
+#define S3C2440_SDICON_SDRESET        (1<<8)
+#define S3C2440_SDICON_MMCCLOCK       (1<<5)
+#define S3C2410_SDICON_BYTEORDER      (1<<4)
+#define S3C2410_SDICON_SDIOIRQ        (1<<3)
+#define S3C2410_SDICON_RWAITEN        (1<<2)
+#define S3C2410_SDICON_FIFORESET      (1<<1)
+#define S3C2410_SDICON_CLOCKTYPE      (1<<0)
+
+#define S3C2410_SDICMDCON_ABORT       (1<<12)
+#define S3C2410_SDICMDCON_WITHDATA    (1<<11)
+#define S3C2410_SDICMDCON_LONGRSP     (1<<10)
+#define S3C2410_SDICMDCON_WAITRSP     (1<<9)
+#define S3C2410_SDICMDCON_CMDSTART    (1<<8)
+#define S3C2410_SDICMDCON_SENDERHOST  (1<<6)
+#define S3C2410_SDICMDCON_INDEX       (0x3f)
+
+#define S3C2410_SDICMDSTAT_CRCFAIL    (1<<12)
+#define S3C2410_SDICMDSTAT_CMDSENT    (1<<11)
+#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10)
+#define S3C2410_SDICMDSTAT_RSPFIN     (1<<9)
+#define S3C2410_SDICMDSTAT_XFERING    (1<<8)
+#define S3C2410_SDICMDSTAT_INDEX      (0xff)
+
+#define S3C2440_SDIDCON_DS_BYTE       (0<<22)
+#define S3C2440_SDIDCON_DS_HALFWORD   (1<<22)
+#define S3C2440_SDIDCON_DS_WORD       (2<<22)
+#define S3C2410_SDIDCON_IRQPERIOD     (1<<21)
+#define S3C2410_SDIDCON_TXAFTERRESP   (1<<20)
+#define S3C2410_SDIDCON_RXAFTERCMD    (1<<19)
+#define S3C2410_SDIDCON_BUSYAFTERCMD  (1<<18)
+#define S3C2410_SDIDCON_BLOCKMODE     (1<<17)
+#define S3C2410_SDIDCON_WIDEBUS       (1<<16)
+#define S3C2410_SDIDCON_DMAEN         (1<<15)
+#define S3C2410_SDIDCON_STOP          (1<<14)
+#define S3C2440_SDIDCON_DATSTART      (1<<14)
+#define S3C2410_SDIDCON_DATMODE	      (3<<12)
+#define S3C2410_SDIDCON_BLKNUM        (0x7ff)
+
+/* constants for S3C2410_SDIDCON_DATMODE */
+#define S3C2410_SDIDCON_XFER_READY    (0<<12)
+#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12)
+#define S3C2410_SDIDCON_XFER_RXSTART  (2<<12)
+#define S3C2410_SDIDCON_XFER_TXSTART  (3<<12)
+
+#define S3C2410_SDIDCON_BLKNUM_MASK   (0xFFF)
+#define S3C2410_SDIDCNT_BLKNUM_SHIFT  (12)
+
+#define S3C2410_SDIDSTA_RDYWAITREQ    (1<<10)
+#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9)
+#define S3C2410_SDIDSTA_FIFOFAIL      (1<<8)	/* reserved on 2440 */
+#define S3C2410_SDIDSTA_CRCFAIL       (1<<7)
+#define S3C2410_SDIDSTA_RXCRCFAIL     (1<<6)
+#define S3C2410_SDIDSTA_DATATIMEOUT   (1<<5)
+#define S3C2410_SDIDSTA_XFERFINISH    (1<<4)
+#define S3C2410_SDIDSTA_BUSYFINISH    (1<<3)
+#define S3C2410_SDIDSTA_SBITERR       (1<<2)	/* reserved on 2410a/2440 */
+#define S3C2410_SDIDSTA_TXDATAON      (1<<1)
+#define S3C2410_SDIDSTA_RXDATAON      (1<<0)
+
+#define S3C2440_SDIFSTA_FIFORESET      (1<<16)
+#define S3C2440_SDIFSTA_FIFOFAIL       (3<<14)  /* 3 is correct (2 bits) */
+#define S3C2410_SDIFSTA_TFDET          (1<<13)
+#define S3C2410_SDIFSTA_RFDET          (1<<12)
+#define S3C2410_SDIFSTA_TFHALF         (1<<11)
+#define S3C2410_SDIFSTA_TFEMPTY        (1<<10)
+#define S3C2410_SDIFSTA_RFLAST         (1<<9)
+#define S3C2410_SDIFSTA_RFFULL         (1<<8)
+#define S3C2410_SDIFSTA_RFHALF         (1<<7)
+#define S3C2410_SDIFSTA_COUNTMASK      (0x7f)
+
+#define S3C2410_SDIIMSK_RESPONSECRC    (1<<17)
+#define S3C2410_SDIIMSK_CMDSENT        (1<<16)
+#define S3C2410_SDIIMSK_CMDTIMEOUT     (1<<15)
+#define S3C2410_SDIIMSK_RESPONSEND     (1<<14)
+#define S3C2410_SDIIMSK_READWAIT       (1<<13)
+#define S3C2410_SDIIMSK_SDIOIRQ        (1<<12)
+#define S3C2410_SDIIMSK_FIFOFAIL       (1<<11)
+#define S3C2410_SDIIMSK_CRCSTATUS      (1<<10)
+#define S3C2410_SDIIMSK_DATACRC        (1<<9)
+#define S3C2410_SDIIMSK_DATATIMEOUT    (1<<8)
+#define S3C2410_SDIIMSK_DATAFINISH     (1<<7)
+#define S3C2410_SDIIMSK_BUSYFINISH     (1<<6)
+#define S3C2410_SDIIMSK_SBITERR        (1<<5)	/* reserved 2440/2410a */
+#define S3C2410_SDIIMSK_TXFIFOHALF     (1<<4)
+#define S3C2410_SDIIMSK_TXFIFOEMPTY    (1<<3)
+#define S3C2410_SDIIMSK_RXFIFOLAST     (1<<2)
+#define S3C2410_SDIIMSK_RXFIFOFULL     (1<<1)
+#define S3C2410_SDIIMSK_RXFIFOHALF     (1<<0)
+
+#endif /* __ASM_ARM_REGS_SDI */
diff --git a/arch/arm/mach-s3c2410/include/mach/reset.h b/arch/arm/mach-s3c2410/include/mach/reset.h
new file mode 100644
index 0000000..f8c9387
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/reset.h
@@ -0,0 +1,22 @@
+/* arch/arm/mach-s3c2410/include/mach/reset.h
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 CPU reset controls
+*/
+
+#ifndef __ASM_ARCH_RESET_H
+#define __ASM_ARCH_RESET_H __FILE__
+
+/* This allows the over-ride of the default reset code
+*/
+
+extern void (*s3c24xx_reset_hook)(void);
+
+#endif /* __ASM_ARCH_RESET_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
new file mode 100644
index 0000000..3fe8be9
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
@@ -0,0 +1,27 @@
+/* arch/arm/mach-s3c2410/include/mach/spi-gpio.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - SPI Controller platfrom_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SPIGPIO_H
+#define __ASM_ARCH_SPIGPIO_H __FILE__
+
+struct s3c2410_spigpio_info {
+	unsigned long		 pin_clk;
+	unsigned long		 pin_mosi;
+	unsigned long		 pin_miso;
+
+	int			 bus_num;
+
+	void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
+};
+
+
+#endif /* __ASM_ARCH_SPIGPIO_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
new file mode 100644
index 0000000..921b13b
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -0,0 +1,25 @@
+/* arch/arm/mach-s3c2410/include/mach/spi.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - SPI Controller platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SPI_H
+#define __ASM_ARCH_SPI_H __FILE__
+
+struct s3c2410_spi_info {
+	unsigned long		 pin_cs;	/* simple gpio cs */
+	unsigned int		 num_cs;	/* total chipselects */
+	int			 bus_num;       /* bus number to use. */
+
+	void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
+};
+
+
+#endif /* __ASM_ARCH_SPI_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h
new file mode 100644
index 0000000..ec2defe
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h
@@ -0,0 +1,64 @@
+/* arch/arm/mach-s3c2410/include/mach/system-reset.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - System define for arch_reset() function
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#include <asm/plat-s3c/regs-watchdog.h>
+#include <mach/regs-clock.h>
+
+#include <linux/clk.h>
+#include <linux/err.h>
+
+extern void (*s3c24xx_reset_hook)(void);
+
+static void
+arch_reset(char mode)
+{
+	struct clk *wdtclk;
+
+	if (mode == 's') {
+		cpu_reset(0);
+	}
+
+	if (s3c24xx_reset_hook)
+		s3c24xx_reset_hook();
+
+	printk("arch_reset: attempting watchdog reset\n");
+
+	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
+
+	wdtclk = clk_get(NULL, "watchdog");
+	if (!IS_ERR(wdtclk)) {
+		clk_enable(wdtclk);
+	} else
+		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+
+	/* put initial values into count and data */
+	__raw_writel(0x80, S3C2410_WTCNT);
+	__raw_writel(0x80, S3C2410_WTDAT);
+
+	/* set the watchdog to go and reset... */
+	__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
+		     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
+
+	/* wait for reset to assert... */
+	mdelay(500);
+
+	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+
+	/* delay to allow the serial port to show the message */
+	mdelay(50);
+
+	/* we'll take a jump through zero as a poor second */
+	cpu_reset(0);
+}
diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h
new file mode 100644
index 0000000..e9f676b
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/system.h
@@ -0,0 +1,58 @@
+/* arch/arm/mach-s3c2410/include/mach/system.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - System function defines and includes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#include <mach/map.h>
+#include <mach/idle.h>
+#include <mach/reset.h>
+
+#include <mach/regs-clock.h>
+
+void (*s3c24xx_idle)(void);
+void (*s3c24xx_reset_hook)(void);
+
+void s3c24xx_default_idle(void)
+{
+	unsigned long tmp;
+	int i;
+
+	/* idle the system by using the idle mode which will wait for an
+	 * interrupt to happen before restarting the system.
+	 */
+
+	/* Warning: going into idle state upsets jtag scanning */
+
+	__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
+		     S3C2410_CLKCON);
+
+	/* the samsung port seems to do a loop and then unset idle.. */
+	for (i = 0; i < 50; i++) {
+		tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
+	}
+
+	/* this bit is not cleared on re-start... */
+
+	__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
+		     S3C2410_CLKCON);
+}
+
+static void arch_idle(void)
+{
+	if (s3c24xx_idle != NULL)
+		(s3c24xx_idle)();
+	else
+		s3c24xx_default_idle();
+}
+
+#include <mach/system-reset.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/timex.h b/arch/arm/mach-s3c2410/include/mach/timex.h
new file mode 100644
index 0000000..2a425ed
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/timex.h
@@ -0,0 +1,26 @@
+/* arch/arm/mach-s3c2410/include/mach/timex.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+
+#define CLOCK_TICK_RATE 12000000
+
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h
new file mode 100644
index 0000000..708e474
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h
@@ -0,0 +1,52 @@
+/* arch/arm/mach-s3c2410/include/mach/uncompress.h
+ *
+ * Copyright (c) 2003, 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/regs-gpio.h>
+#include <mach/map.h>
+
+/* working in physical space... */
+#undef S3C2410_GPIOREG
+#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x)))
+
+#include <asm/plat-s3c/uncompress.h>
+
+static inline int is_arm926(void)
+{
+	unsigned int cpuid;
+
+	asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (cpuid));
+
+	return ((cpuid & 0xff0) == 0x260);
+}
+
+static void arch_detect_cpu(void)
+{
+	unsigned int cpuid;
+
+	cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
+	cpuid &= S3C2410_GSTATUS1_IDMASK;
+
+	if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 ||
+	    cpuid == S3C2410_GSTATUS1_2442) {
+		fifo_mask = S3C2440_UFSTAT_TXMASK;
+		fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+	} else {
+		fifo_mask = S3C2410_UFSTAT_TXMASK;
+		fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT;
+	}
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/usb-control.h b/arch/arm/mach-s3c2410/include/mach/usb-control.h
new file mode 100644
index 0000000..cd91d15
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/usb-control.h
@@ -0,0 +1,41 @@
+/* arch/arm/mach-s3c2410/include/mach/usb-control.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - usb port information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_USBCONTROL_H
+#define __ASM_ARCH_USBCONTROL_H "arch/arm/mach-s3c2410/include/mach/usb-control.h"
+
+#define S3C_HCDFLG_USED	(1)
+
+struct s3c2410_hcd_port {
+	unsigned char	flags;
+	unsigned char	power;
+	unsigned char	oc_status;
+	unsigned char	oc_changed;
+};
+
+struct s3c2410_hcd_info {
+	struct usb_hcd		*hcd;
+	struct s3c2410_hcd_port	port[2];
+
+	void		(*power_control)(int port, int to);
+	void		(*enable_oc)(struct s3c2410_hcd_info *, int on);
+	void		(*report_oc)(struct s3c2410_hcd_info *, int ports);
+};
+
+static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
+{
+	if (info->report_oc != NULL) {
+		(info->report_oc)(info, ports);
+	}
+}
+
+#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/vmalloc.h b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
new file mode 100644
index 0000000..315b007
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
+ *
+ * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h b/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
new file mode 100644
index 0000000..e411991
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * VR1000 - CPLD control constants
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_VR1000CPLD_H
+#define __ASM_ARCH_VR1000CPLD_H
+
+#define VR1000_CPLD_CTRL2_RAMWEN     (0x04)   /* SRAM Write Enable */
+
+#endif /* __ASM_ARCH_VR1000CPLD_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
new file mode 100644
index 0000000..f53f85b
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
@@ -0,0 +1,26 @@
+/* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine VR1000 - IRQ Number definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_VR1000IRQ_H
+#define __ASM_ARCH_VR1000IRQ_H
+
+/* irq numbers to onboard peripherals */
+
+#define IRQ_USBOC	     IRQ_EINT19
+#define IRQ_IDE0	     IRQ_EINT16
+#define IRQ_IDE1	     IRQ_EINT17
+#define IRQ_VR1000_SERIAL    IRQ_EINT12
+#define IRQ_VR1000_DM9000A   IRQ_EINT10
+#define IRQ_VR1000_DM9000N   IRQ_EINT9
+#define IRQ_SMALERT	     IRQ_EINT8
+
+#endif /* __ASM_ARCH_VR1000IRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-map.h b/arch/arm/mach-s3c2410/include/mach/vr1000-map.h
new file mode 100644
index 0000000..99612fc
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-map.h
@@ -0,0 +1,110 @@
+/* arch/arm/mach-s3c2410/include/mach/vr1000-map.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine VR1000 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* needs arch/map.h including with this */
+
+/* ok, we've used up to 0x13000000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space. We also have the board's CPLD to find register space
+ * for.
+ */
+
+#ifndef __ASM_ARCH_VR1000MAP_H
+#define __ASM_ARCH_VR1000MAP_H
+
+#include <mach/bast-map.h>
+
+#define VR1000_IOADDR(x) BAST_IOADDR(x)
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define VR1000_VA_CTRL1	    VR1000_IOADDR(0x00000000)	 /* 0x01300000 */
+#define VR1000_PA_CTRL1	    (S3C2410_CS5 | 0x7800000)
+
+#define VR1000_VA_CTRL2	    VR1000_IOADDR(0x00100000)	 /* 0x01400000 */
+#define VR1000_PA_CTRL2	    (S3C2410_CS1 | 0x6000000)
+
+#define VR1000_VA_CTRL3	    VR1000_IOADDR(0x00200000)	 /* 0x01500000 */
+#define VR1000_PA_CTRL3	    (S3C2410_CS1 | 0x6800000)
+
+#define VR1000_VA_CTRL4	    VR1000_IOADDR(0x00300000)	 /* 0x01600000 */
+#define VR1000_PA_CTRL4	    (S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define VR1000_PA_PC104_IRQREQ  (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
+#define VR1000_VA_PC104_IRQREQ  VR1000_IOADDR(0x00400000)
+
+#define VR1000_PA_PC104_IRQRAW  (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
+#define VR1000_VA_PC104_IRQRAW  VR1000_IOADDR(0x00500000)
+
+#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
+#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
+
+/* 0xE0000000 contains the IO space that is split by speed and
+ * wether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000  8bit,  slow
+ * 0x04000000 to 0x08000000  16bit, slow
+ * 0x08000000 to 0x0C000000  16bit, net
+ * 0x0C000000 to 0x10000000  16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x02000000 to 0x02100000 1MB  IDE primary channel
+ * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB  IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
+ * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controllers
+ * 0x02600000 to 0x02700000 1MB
+ *
+ * the phyiscal layout of the zones are:
+ *  nGCS2 - 8bit, slow
+ *  nGCS3 - 16bit, slow
+ *  nGCS4 - 16bit, net
+ *  nGCS5 - 16bit, fast
+ */
+
+#define VR1000_VA_MULTISPACE (0xE0000000)
+
+#define VR1000_VA_ISAIO		   (VR1000_VA_MULTISPACE + 0x00000000)
+#define VR1000_VA_ISAMEM	   (VR1000_VA_MULTISPACE + 0x01000000)
+#define VR1000_VA_IDEPRI	   (VR1000_VA_MULTISPACE + 0x02000000)
+#define VR1000_VA_IDEPRIAUX	   (VR1000_VA_MULTISPACE + 0x02100000)
+#define VR1000_VA_IDESEC	   (VR1000_VA_MULTISPACE + 0x02200000)
+#define VR1000_VA_IDESECAUX	   (VR1000_VA_MULTISPACE + 0x02300000)
+#define VR1000_VA_ASIXNET	   (VR1000_VA_MULTISPACE + 0x02400000)
+#define VR1000_VA_DM9000	   (VR1000_VA_MULTISPACE + 0x02500000)
+#define VR1000_VA_SUPERIO	   (VR1000_VA_MULTISPACE + 0x02600000)
+
+/* physical offset addresses for the peripherals */
+
+#define VR1000_PA_IDEPRI	   (0x02000000)
+#define VR1000_PA_IDEPRIAUX	   (0x02800000)
+#define VR1000_PA_IDESEC	   (0x03000000)
+#define VR1000_PA_IDESECAUX	   (0x03800000)
+#define VR1000_PA_DM9000	   (0x05000000)
+
+#define VR1000_PA_SERIAL	   (0x11800000)
+#define VR1000_VA_SERIAL	   (VR1000_IOADDR(0x00700000))
+
+/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
+#define VR1000_PA_SRAM		   (S3C2410_CS1 | 0x05000000)
+
+/* some configurations for the peripherals */
+
+#define VR1000_DM9000_CS	 VR1000_VAM_CS4
+
+#endif /* __ASM_ARCH_VR1000MAP_H */
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 2d72496ed..f0de3c2 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -42,15 +42,15 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/devs.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 9c76df6..fb1e78e 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -29,24 +29,24 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
-#include <asm/arch/bast-cpld.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
+#include <mach/bast-cpld.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 //#include <asm/debug-ll.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
 
 #include <asm/plat-s3c/nand.h>
 #include <asm/plat-s3c/iic.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index f658b84..e35933a 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -25,19 +25,19 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
 
-#include <asm/arch/h1940.h>
-#include <asm/arch/h1940-latch.h>
-#include <asm/arch/fb.h>
+#include <mach/h1940.h>
+#include <mach/h1940-latch.h>
+#include <mach/fb.h>
 #include <asm/plat-s3c24xx/udc.h>
 
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index cbc7956a..80fe2ed 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -26,15 +26,15 @@
 #include <linux/serial_core.h>
 #include <linux/timer.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/fb.h>
-#include <asm/arch/leds-gpio.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/fb.h>
+#include <mach/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index 3b5dc6e..606ee15 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -22,15 +22,15 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/otom-map.h>
+#include <mach/otom-map.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 012dc14..7d34844 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -42,19 +42,19 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 #include <asm/plat-s3c/nand.h>
 #include <asm/plat-s3c24xx/udc.h>
-#include <asm/arch/spi.h>
-#include <asm/arch/spi-gpio.h>
+#include <mach/spi.h>
+#include <mach/spi-gpio.h>
 
 #include <asm/plat-s3c24xx/common-smdk.h>
 #include <asm/plat-s3c24xx/devs.h>
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index 849ebe9..c904008 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -42,7 +42,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index d7646a9..ec87306 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -39,7 +39,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index a3f60cd0..12cbca6 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -30,19 +30,19 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/bast-map.h>
-#include <asm/arch/vr1000-map.h>
-#include <asm/arch/vr1000-irq.h>
-#include <asm/arch/vr1000-cpld.h>
+#include <mach/bast-map.h>
+#include <mach/vr1000-map.h>
+#include <mach/vr1000-irq.h>
+#include <mach/vr1000-cpld.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/devs.h>
diff --git a/arch/arm/mach-s3c2410/nor-simtec.c b/arch/arm/mach-s3c2410/nor-simtec.c
index f44e21b..b2ae237 100644
--- a/arch/arm/mach-s3c2410/nor-simtec.c
+++ b/arch/arm/mach-s3c2410/nor-simtec.c
@@ -26,9 +26,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/map.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-cpld.h>
+#include <mach/map.h>
+#include <mach/bast-map.h>
+#include <mach/bast-cpld.h>
 
 
 static void simtec_nor_vpp(struct map_info *map, int vpp)
diff --git a/arch/arm/mach-s3c2410/pm-h1940.S b/arch/arm/mach-s3c2410/pm-h1940.S
index cb87c94..c93bf2d 100644
--- a/arch/arm/mach-s3c2410/pm-h1940.S
+++ b/arch/arm/mach-s3c2410/pm-h1940.S
@@ -20,10 +20,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 	.text
 	.global	h1940_pm_return
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index b908727..ba43ff9 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -26,13 +26,13 @@
 #include <linux/time.h>
 #include <linux/sysdev.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/mach-types.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/h1940.h>
+#include <mach/regs-gpio.h>
+#include <mach/h1940.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 54d4b79..5d977f9 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -24,11 +24,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index 1597fcf..be37f22 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -26,12 +26,12 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-mem.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-mem.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 	/* s3c2410_cpu_suspend
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 28942e0..4dacf8a 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -26,12 +26,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
-#include <asm/arch/usb-control.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
+#include <mach/usb-control.h>
+#include <mach/regs-gpio.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index b1552b2..af4b2ce 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -34,12 +34,12 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/s3c2412.h>
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 1dd8649..22fc04a 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -18,18 +18,18 @@
 #include <linux/serial_core.h>
 
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c24xx/dma.h>
 #include <asm/plat-s3c24xx/cpu.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
index 4f86693..f7afece 100644
--- a/arch/arm/mach-s3c2412/gpio.c
+++ b/arch/arm/mach-s3c2412/gpio.c
@@ -20,9 +20,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
 {
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index 0230b2f..ac62b79 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -25,15 +25,15 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-power.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-power.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/irq.h>
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 7f59247..30f613a 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -37,12 +37,12 @@
 #include <asm/plat-s3c/nand.h>
 #include <asm/plat-s3c/iic.h>
 
-#include <asm/arch/regs-power.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/spi-gpio.h>
-#include <asm/arch/fb.h>
+#include <mach/regs-power.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/spi-gpio.h>
+#include <mach/fb.h>
 
 #include <asm/mach-types.h>
 
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index d7d0e95..80affb1 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -24,7 +24,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iomd.h>
 #include <asm/setup.h>
 #include <asm/io.h>
@@ -33,12 +33,12 @@
 
 //#include <asm/debug-ll.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/idle.h>
+#include <mach/idle.h>
 #include <asm/plat-s3c24xx/udc.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2412.h>
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index d7087d0..7a08b37 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -27,18 +27,18 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/idle.h>
-#include <asm/arch/fb.h>
+#include <mach/idle.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c/nand.h>
 
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index a71d6c6..737523a 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -19,14 +19,14 @@
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-power.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-power.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-dsc.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 5ce001b5..d278010 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -25,22 +25,22 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/proc-fns.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/reset.h>
-#include <asm/arch/idle.h>
+#include <mach/reset.h>
+#include <mach/idle.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-power.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-power.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-dsc.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
-#include <asm/arch/regs-s3c2412.h>
+#include <mach/regs-s3c2412.h>
 
 #include <asm/plat-s3c24xx/s3c2412.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2412/sleep.S b/arch/arm/mach-s3c2412/sleep.S
index 609312b..c82418e 100644
--- a/arch/arm/mach-s3c2412/sleep.S
+++ b/arch/arm/mach-s3c2412/sleep.S
@@ -22,10 +22,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
 
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-irq.h>
 
 	.text
 
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index 9ef4efd..95567e6 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -34,12 +34,12 @@
 #include <linux/mutex.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/atomic.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 0b12608..cdd4e6e 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -18,17 +18,17 @@
 #include <linux/serial_core.h>
 
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 #include <asm/plat-s3c24xx/dma.h>
 #include <asm/plat-s3c24xx/cpu.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
 
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
index e7f1ca1..c0c6743 100644
--- a/arch/arm/mach-s3c2440/dsc.c
+++ b/arch/arm/mach-s3c2440/dsc.c
@@ -20,12 +20,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-dsc.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
index 457255d..276b823 100644
--- a/arch/arm/mach-s3c2440/irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -25,14 +25,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index f53eba7..265c77d 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -27,19 +27,19 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/anubis-map.h>
-#include <asm/arch/anubis-irq.h>
-#include <asm/arch/anubis-cpld.h>
+#include <mach/anubis-map.h>
+#include <mach/anubis-irq.h>
+#include <mach/anubis-cpld.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
 #include <asm/plat-s3c/nand.h>
 
 #include <linux/mtd/mtd.h>
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 48e8fb6..f0f0cc6 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -27,14 +27,14 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
 #include <asm/plat-s3c/nand.h>
 
 #include <linux/mtd/mtd.h>
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 0f4437b..1a5e702 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -29,13 +29,13 @@
 #include <asm/mach/irq.h>
 
 #include <asm/setup.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 //#include <asm/debug-ll.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index c4008d5..d2ee0cd 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -25,18 +25,18 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/osiris-map.h>
-#include <asm/arch/osiris-cpld.h>
+#include <mach/osiris-map.h>
+#include <mach/osiris-cpld.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
 #include <asm/plat-s3c/nand.h>
 
 #include <linux/mtd/mtd.h>
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index 569f00b..e0b07e6 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -33,18 +33,18 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/h1940.h>
+#include <mach/h1940.h>
 #include <asm/plat-s3c/nand.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/devs.h>
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index 52deb5a..327c8f3 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -26,17 +26,17 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/idle.h>
-#include <asm/arch/fb.h>
+#include <mach/idle.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index 19f06c3..d6b9a92 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -25,7 +25,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c
index ad2e8a9..569b5c3 100644
--- a/arch/arm/mach-s3c2442/clock.c
+++ b/arch/arm/mach-s3c2442/clock.c
@@ -34,12 +34,12 @@
 #include <linux/mutex.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/atomic.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 04d248a..6a8d7cc 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -34,10 +34,10 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-s3c2443-clock.h>
+#include <mach/regs-s3c2443-clock.h>
 
 #include <asm/plat-s3c24xx/s3c2443.h>
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index f6c006d..c1ff03a 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -18,18 +18,18 @@
 #include <linux/serial_core.h>
 
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c24xx/dma.h>
 #include <asm/plat-s3c24xx/cpu.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
 
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index 499cddb..9674de7 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -25,14 +25,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 5a6d333..e3c0d587 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -26,17 +26,17 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/idle.h>
-#include <asm/arch/fb.h>
+#include <mach/idle.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index 3e9f923..37793f9 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -25,12 +25,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-s3c2443-clock.h>
-#include <asm/arch/reset.h>
+#include <mach/regs-s3c2443-clock.h>
+#include <mach/reset.h>
 
 #include <asm/plat-s3c24xx/s3c2443.h>
 #include <asm/plat-s3c24xx/devs.h>
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index d219845..55e6447 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -20,7 +20,7 @@
 #include <linux/delay.h>
 #include <linux/mm.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/irda.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/mcp.h>
+#include <mach/assabet.h>
+#include <mach/mcp.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index d087c3bf..3efefbd 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -23,10 +23,10 @@
 #include <linux/mtd/partitions.h>
 #include <linux/errno.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
@@ -34,7 +34,7 @@
 #include <asm/hardware/sa1111.h>
 #include <asm/mach/serial_sa1100.h>
 
-#include <asm/arch/badge4.h>
+#include <mach/badge4.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index cfb65eb..fd3ad9c 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 
 #include <asm/mach-types.h>
@@ -28,8 +28,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
 
-#include <asm/arch/cerf.h>
-#include <asm/arch/mcp.h>
+#include <mach/cerf.h>
+#include <mach/mcp.h>
 #include "generic.h"
 
 static struct resource cerfuart2_resources[] = {
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index dbd1aaaa..43c30f8 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -11,7 +11,7 @@
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Very simple clock implementation - we only have one clock to
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 4089363..fe28999 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -26,11 +26,11 @@
 #include <linux/mtd/partitions.h>
 #include <linux/timer.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
-#include <asm/arch/collie.h>
+#include <mach/collie.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
@@ -40,7 +40,7 @@
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/locomo.h>
-#include <asm/arch/mcp.h>
+#include <mach/mcp.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c
index daa9d57..b1161fc 100644
--- a/arch/arm/mach-sa1100/collie_pm.c
+++ b/arch/arm/mach-sa1100/collie_pm.c
@@ -24,10 +24,10 @@
 #include <linux/platform_device.h>
 
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/scoop.h>
 #include <asm/dma.h>
-#include <asm/arch/collie.h>
+#include <mach/collie.h>
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/sharpsl_pm.h>
 
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c
index 61df76f..da3a898 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/arch/arm/mach-sa1100/cpu-sa1100.c
@@ -88,7 +88,7 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c
index a471f9f..39d38c8 100644
--- a/arch/arm/mach-sa1100/cpu-sa1110.c
+++ b/arch/arm/mach-sa1100/cpu-sa1110.c
@@ -26,7 +26,7 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/io.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
index 65d96ee..f990a3e 100644
--- a/arch/arm/mach-sa1100/dma.c
+++ b/arch/arm/mach-sa1100/dma.c
@@ -18,7 +18,7 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 
 
@@ -76,7 +76,7 @@
  * 	address of the hardware registers for that channel as the channel
  * 	identifier. This identifier is written to the location pointed by
  * 	@dma_regs. The list of possible values for @device are listed into
- * 	linux/include/asm-arm/arch-sa1100/dma.h as a dma_device_t enum.
+ * 	arch/arm/mach-sa1100/include/mach/dma.h as a dma_device_t enum.
  *
  * 	Note that reading from a port and writing to the same port are
  * 	actually considered as two different streams requiring separate
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index e616130..5a08fe2 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -21,7 +21,7 @@
 
 #include <asm/div64.h>
 #include <asm/cnt32_to_63.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-sa1100/gpio.c b/arch/arm/mach-sa1100/gpio.c
index 184b04c..0d3829a 100644
--- a/arch/arm/mach-sa1100/gpio.c
+++ b/arch/arm/mach-sa1100/gpio.c
@@ -12,7 +12,7 @@
 #include <linux/module.h>
 
 #include <asm/gpio.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include "generic.h"
 
 static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 8c560ae..af25a78 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -30,7 +30,7 @@
 #include <linux/serial_core.h>
 
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 
@@ -41,14 +41,14 @@
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
 
-#include <asm/arch/h3600.h>
+#include <mach/h3600.h>
 
 #if defined (CONFIG_SA1100_H3600) || defined (CONFIG_SA1100_H3100)
-#include <asm/arch/h3600_gpio.h>
+#include <mach/h3600_gpio.h>
 #endif
 
 #ifdef CONFIG_SA1100_H3800
-#include <asm/arch/h3600_asic.h>
+#include <mach/h3600_asic.h>
 #endif
 
 #include "generic.h"
@@ -681,7 +681,7 @@
 
 #define MAX_ASIC_ISR_LOOPS    20
 
-/* The order of these is important - see #include <asm/arch/irqs.h> */
+/* The order of these is important - see #include <mach/irqs.h> */
 static u32 kpio_irq_mask[] = {
 	KPIO_KEY_ALL,
 	KPIO_SPI_INT,
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 270feb0..e7056c0 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -22,7 +22,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 #include <asm/page.h>
diff --git a/include/asm-arm/arch-sa1100/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h
similarity index 100%
rename from include/asm-arm/arch-sa1100/SA-1100.h
rename to arch/arm/mach-sa1100/include/mach/SA-1100.h
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1101.h b/arch/arm/mach-sa1100/include/mach/SA-1101.h
new file mode 100644
index 0000000..5d2ad7d
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/SA-1101.h
@@ -0,0 +1,925 @@
+/*
+ * SA-1101.h
+ *
+ * Copyright (c) Peter Danielsson 1999
+ *
+ * Definition of constants related to the sa1101
+ * support chip for the sa1100
+ *
+ */
+
+
+/* Be sure that virtual mapping is defined right */
+#ifndef __ASM_ARCH_HARDWARE_H
+#error You must include hardware.h not SA-1101.h
+#endif
+
+#ifndef SA1101_BASE
+#error You must define SA-1101 physical base address
+#endif
+
+#ifndef LANGUAGE
+# ifdef __ASSEMBLY__
+#  define LANGUAGE Assembly
+# else
+#  define LANGUAGE C
+# endif
+#endif
+
+/*
+ * We have mapped the sa1101 depending on the value of SA1101_BASE.
+ * It then appears from 0xf4000000.
+ */
+
+#define SA1101_p2v( x )         ((x) - SA1101_BASE + 0xf4000000)
+#define SA1101_v2p( x )         ((x) - 0xf4000000  + SA1101_BASE)
+
+#ifndef SA1101_p2v
+#define SA1101_p2v(PhAdd)  (PhAdd)
+#endif
+
+#include <mach/bitfield.h>
+
+#define C               0
+#define Assembly        1
+
+
+/*
+ * Memory map
+ */
+
+#define __SHMEM_CONTROL0	0x00000000
+#define __SYSTEM_CONTROL1	0x00000400
+#define __ARBITER		0x00020000
+#define __SYSTEM_CONTROL2	0x00040000
+#define __SYSTEM_CONTROL3	0x00060000
+#define __PARALLEL_PORT		0x00080000
+#define __VIDMEM_CONTROL	0x00100000
+#define __UPDATE_FIFO		0x00120000
+#define __SHMEM_CONTROL1	0x00140000
+#define __INTERRUPT_CONTROL	0x00160000
+#define __USB_CONTROL		0x00180000
+#define __TRACK_INTERFACE	0x001a0000
+#define __MOUSE_INTERFACE	0x001b0000
+#define __KEYPAD_INTERFACE	0x001c0000
+#define __PCMCIA_INTERFACE	0x001e0000
+#define	__VGA_CONTROL		0x00200000
+#define __GPIO_INTERFACE	0x00300000
+
+/*
+ * Macro that calculates real address for registers in the SA-1101
+ */
+
+#define _SA1101( x )    ((x) + SA1101_BASE)
+
+/*
+ * Interface and shared memory controller registers
+ *
+ * Registers
+ *	SKCR		SA-1101 control register (read/write)
+ *	SMCR		Shared Memory Controller Register
+ *	SNPR		Snoop Register
+ */
+
+#define _SKCR		_SA1101( 0x00000000 ) /* SA-1101 Control Reg. */
+#define _SMCR		_SA1101( 0x00140000 ) /* Shared Mem. Control Reg. */
+#define _SNPR		_SA1101( 0x00140400 ) /* Snoop Reg. */
+
+#if LANGUAGE == C
+#define SKCR		(*((volatile Word *) SA1101_p2v (_SKCR)))
+#define SMCR		(*((volatile Word *) SA1101_p2v (_SMCR)))
+#define SNPR		(*((volatile Word *) SA1101_p2v (_SNPR)))
+
+#define SKCR_PLLEn	  0x0001	  /* Enable On-Chip PLL */
+#define SKCR_BCLKEn	  0x0002	  /* Enables BCLK */
+#define SKCR_Sleep	  0x0004	  /* Sleep Mode */
+#define SKCR_IRefEn	  0x0008	  /* DAC Iref input enable */
+#define SKCR_VCOON	  0x0010	  /* VCO bias */
+#define SKCR_ScanTestEn	  0x0020	  /* Enables scan test */
+#define SKCR_ClockTestEn  0x0040	  /* Enables clock test */
+
+#define SMCR_DCAC	  Fld(2,0)	  /* Number of column address bits */
+#define SMCR_DRAC	  Fld(2,2)	  /* Number of row address bits */
+#define SMCR_ArbiterBias  0x0008	  /* favor video or USB */
+#define SMCR_TopVidMem	  Fld(4,5)	  /* Top 4 bits of vidmem addr. */
+
+#define SMCR_ColAdrBits( x )		  /* col. addr bits 8..11 */ \
+	(( (x) - 8 ) << FShft (SMCR_DCAC))
+#define SMCR_RowAdrBits( x )		  /* row addr bits 9..12 */\
+	(( (x) - 9 ) << FShft (SMCR_DRAC))
+
+#define SNPR_VFBstart	  Fld(12,0)	/* Video frame buffer addr */
+#define SNPR_VFBsize	  Fld(11,12)	/* Video frame buffer size */
+#define SNPR_WholeBank	  (1 << 23)	/* Whole bank bit */
+#define SNPR_BankSelect	  Fld(2,27)	/* Bank select */
+#define SNPR_SnoopEn	  (1 << 31)	/* Enable snoop operation */
+
+#define SNPR_Set_VFBsize( x )   /* set frame buffer size (in kb) */ \
+	( (x) << FShft (SNPR_VFBsize))
+#define SNPR_Select_Bank(x)     /* select bank 0 or 1 */  \
+	(( (x) + 1 ) << FShft (SNPR_BankSelect ))
+
+#endif /* LANGUAGE == C */
+
+/*
+ * Video Memory Controller
+ *
+ * Registers
+ *    VMCCR	Configuration register
+ *    VMCAR	VMC address register
+ *    VMCDR	VMC data register
+ *
+ */
+
+#define _VMCCR		_SA1101( 0x00100000 )	/* Configuration register */
+#define _VMCAR		_SA1101( 0x00101000 )	/* VMC address register */
+#define _VMCDR		_SA1101( 0x00101400 )	/* VMC data register */
+
+#if LANGUAGE == C
+#define VMCCR		(*((volatile Word *) SA1101_p2v (_VMCCR)))
+#define VMCAR		(*((volatile Word *) SA1101_p2v (_VMCAR)))
+#define VMCDR		(*((volatile Word *) SA1101_p2v (_VMCDR)))
+
+#define VMCCR_RefreshEn	    0x0000	  /* Enable memory refresh */
+#define VMCCR_Config	    0x0001	  /* DRAM size */
+#define VMCCR_RefPeriod	    Fld(2,3)	  /* Refresh period */
+#define VMCCR_StaleDataWait Fld(4,5)	  /* Stale FIFO data timeout counter */
+#define VMCCR_SleepState    (1<<9)	  /* State of interface pins in sleep*/
+#define VMCCR_RefTest	    (1<<10)	  /* refresh test */
+#define VMCCR_RefLow	    Fld(6,11)	  /* refresh low counter */
+#define VMCCR_RefHigh	    Fld(7,17)	  /* refresh high counter */
+#define VMCCR_SDTCTest	    Fld(7,24)	  /* stale data timeout counter */
+#define VMCCR_ForceSelfRef  (1<<31)	  /* Force self refresh */
+
+#endif LANGUAGE == C
+
+
+/* Update FIFO
+ *
+ * Registers
+ *    UFCR	Update FIFO Control Register
+ *    UFSR	Update FIFO Status Register
+ *    UFLVLR	update FIFO level register
+ *    UFDR	update FIFO data register
+ */
+
+#define _UFCR	_SA1101(0x00120000)   /* Update FIFO Control Reg. */
+#define _UFSR	_SA1101(0x00120400)   /* Update FIFO Status Reg. */	
+#define _UFLVLR	_SA1101(0x00120800)   /* Update FIFO level reg. */
+#define _UFDR	_SA1101(0x00120c00)   /* Update FIFO data reg. */
+
+#if LANGUAGE == C
+
+#define UFCR 	(*((volatile Word *) SA1101_p2v (_UFCR)))
+#define UFSR	(*((volatile Word *) SA1101_p2v (_UFSR)))
+#define UFLVLR	(*((volatile Word *) SA1101_p2v (_UFLVLR))) 
+#define UFDR	(*((volatile Word *) SA1101_p2v (_UFDR)))
+
+
+#define UFCR_FifoThreshhold	Fld(7,0)	/* Level for FifoGTn flag */
+
+#define UFSR_FifoGTnFlag	0x01		/* FifoGTn flag */#define UFSR_FifoEmpty		0x80		/* FIFO is empty */
+
+#endif /* LANGUAGE == C */
+
+/* System Controller
+ *
+ * Registers
+ *    SKPCR	Power Control Register
+ *    SKCDR	Clock Divider Register
+ *    DACDR1	DAC1 Data register
+ *    DACDR2	DAC2 Data register
+ */
+
+#define _SKPCR		_SA1101(0x00000400)
+#define _SKCDR		_SA1101(0x00040000)
+#define _DACDR1		_SA1101(0x00060000)
+#define _DACDR2		_SA1101(0x00060400)
+
+#if LANGUAGE == C
+#define SKPCR 	(*((volatile Word *) SA1101_p2v (_SKPCR)))
+#define SKCDR	(*((volatile Word *) SA1101_p2v (_SKCDR)))
+#define DACDR1	(*((volatile Word *) SA1101_p2v (_DACDR1)))
+#define DACDR2	(*((volatile Word *) SA1101_p2v (_DACDR2)))
+
+#define SKPCR_UCLKEn	     0x01    /* USB Enable */
+#define SKPCR_PCLKEn	     0x02    /* PS/2 Enable */
+#define SKPCR_ICLKEn	     0x04    /* Interrupt Controller Enable */
+#define SKPCR_VCLKEn	     0x08    /* Video Controller Enable */
+#define SKPCR_PICLKEn	     0x10    /* parallel port Enable */
+#define SKPCR_DCLKEn	     0x20    /* DACs Enable */
+#define SKPCR_nKPADEn	     0x40    /* Multiplexer */
+
+#define SKCDR_PLLMul	     Fld(7,0)	/* PLL Multiplier */
+#define SKCDR_VCLKEn	     Fld(2,7)	/* Video controller clock divider */
+#define SKDCR_BCLKEn	     (1<<9)	/* BCLK Divider */
+#define SKDCR_UTESTCLKEn     (1<<10)	/* Route USB clock during test mode */
+#define SKDCR_DivRValue	     Fld(6,11)	/* Input clock divider for PLL */
+#define SKDCR_DivNValue	     Fld(5,17)	/* Output clock divider for PLL */
+#define SKDCR_PLLRSH	     Fld(3,22)	/* PLL bandwidth control */
+#define SKDCR_ChargePump     (1<<25)	/* Charge pump control */
+#define SKDCR_ClkTestMode    (1<<26)	/* Clock output test mode */
+#define SKDCR_ClkTestEn	     (1<<27)	/* Test clock generator */
+#define SKDCR_ClkJitterCntl  Fld(3,28)	/* video clock jitter compensation */
+
+#define DACDR_DACCount	     Fld(8,0)	/* Count value */
+#define DACDR1_DACCount	     DACDR_DACCount
+#define DACDR2_DACCount	     DACDR_DACCount
+
+#endif /* LANGUAGE == C */
+
+/*
+ * Parallel Port Interface
+ *
+ * Registers
+ *    IEEE_Config	IEEE mode selection and programmable attributes
+ *    IEEE_Control	Controls the states of IEEE port control outputs
+ *    IEEE_Data		Forward transfer data register
+ *    IEEE_Addr		Forward transfer address register
+ *    IEEE_Status	Port IO signal status register
+ *    IEEE_IntStatus	Port interrupts status register
+ *    IEEE_FifoLevels   Rx and Tx FIFO interrupt generation levels
+ *    IEEE_InitTime	Forward timeout counter initial value
+ *    IEEE_TimerStatus	Forward timeout counter current value
+ *    IEEE_FifoReset	Reset forward transfer FIFO
+ *    IEEE_ReloadValue	Counter reload value
+ *    IEEE_TestControl	Control testmode
+ *    IEEE_TestDataIn	Test data register
+ *    IEEE_TestDataInEn	Enable test data
+ *    IEEE_TestCtrlIn	Test control signals
+ *    IEEE_TestCtrlInEn	Enable test control signals
+ *    IEEE_TestDataStat	Current data bus value
+ *
+ */
+
+/*
+ * The control registers are defined as offsets from a base address 
+ */
+ 
+#define _IEEE( x ) _SA1101( (x) + __PARALLEL_PORT )
+
+#define _IEEE_Config	    _IEEE( 0x0000 )
+#define _IEEE_Control	    _IEEE( 0x0400 )
+#define _IEEE_Data	    _IEEE( 0x4000 )
+#define _IEEE_Addr	    _IEEE( 0x0800 )
+#define _IEEE_Status	    _IEEE( 0x0c00 )
+#define _IEEE_IntStatus	    _IEEE( 0x1000 )
+#define _IEEE_FifoLevels    _IEEE( 0x1400 )
+#define _IEEE_InitTime	    _IEEE( 0x1800 )
+#define _IEEE_TimerStatus   _IEEE( 0x1c00 )
+#define _IEEE_FifoReset	    _IEEE( 0x2000 )
+#define _IEEE_ReloadValue   _IEEE( 0x3c00 )
+#define _IEEE_TestControl   _IEEE( 0x2400 )
+#define _IEEE_TestDataIn    _IEEE( 0x2800 )
+#define _IEEE_TestDataInEn  _IEEE( 0x2c00 )
+#define _IEEE_TestCtrlIn    _IEEE( 0x3000 )
+#define _IEEE_TestCtrlInEn  _IEEE( 0x3400 )
+#define _IEEE_TestDataStat  _IEEE( 0x3800 )
+ 
+
+#if LANGUAGE == C
+#define IEEE_Config	    (*((volatile Word *) SA1101_p2v (_IEEE_Config)))
+#define IEEE_Control	    (*((volatile Word *) SA1101_p2v (_IEEE_Control)))
+#define IEEE_Data	    (*((volatile Word *) SA1101_p2v (_IEEE_Data)))
+#define IEEE_Addr	    (*((volatile Word *) SA1101_p2v (_IEEE_Addr)))
+#define IEEE_Status	    (*((volatile Word *) SA1101_p2v (_IEEE_Status)))
+#define IEEE_IntStatus	    (*((volatile Word *) SA1101_p2v (_IEEE_IntStatus)))
+#define IEEE_FifoLevels	    (*((volatile Word *) SA1101_p2v (_IEEE_FifoLevels)))
+#define IEEE_InitTime	    (*((volatile Word *) SA1101_p2v (_IEEE_InitTime)))
+#define IEEE_TimerStatus    (*((volatile Word *) SA1101_p2v (_IEEE_TimerStatus)))
+#define IEEE_FifoReset	    (*((volatile Word *) SA1101_p2v (_IEEE_FifoReset)))
+#define IEEE_ReloadValue    (*((volatile Word *) SA1101_p2v (_IEEE_ReloadValue)))
+#define IEEE_TestControl    (*((volatile Word *) SA1101_p2v (_IEEE_TestControl)))
+#define IEEE_TestDataIn     (*((volatile Word *) SA1101_p2v (_IEEE_TestDataIn)))
+#define IEEE_TestDataInEn   (*((volatile Word *) SA1101_p2v (_IEEE_TestDataInEn)))
+#define IEEE_TestCtrlIn     (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlIn)))
+#define IEEE_TestCtrlInEn   (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlInEn)))
+#define IEEE_TestDataStat   (*((volatile Word *) SA1101_p2v (_IEEE_TestDataStat)))
+
+
+#define IEEE_Config_M	    Fld(3,0)	 /* Mode select */
+#define IEEE_Config_D	    0x04	 /* FIFO access enable */
+#define IEEE_Config_B	    0x08	 /* 9-bit word enable */
+#define IEEE_Config_T	    0x10	 /* Data transfer enable */
+#define IEEE_Config_A	    0x20	 /* Data transfer direction */
+#define IEEE_Config_E	    0x40	 /* Timer enable */
+#define IEEE_Control_A	    0x08	 /* AutoFd output */
+#define IEEE_Control_E	    0x04	 /* Selectin output */
+#define IEEE_Control_T	    0x02	 /* Strobe output */
+#define IEEE_Control_I	    0x01	 /* Port init output */
+#define IEEE_Data_C	    (1<<31)	 /* Byte count */
+#define IEEE_Data_Db	    Fld(9,16)	 /* Data byte 2 */
+#define IEEE_Data_Da	    Fld(9,0)	 /* Data byte 1 */
+#define IEEE_Addr_A	    Fld(8,0)	 /* forward address transfer byte */
+#define IEEE_Status_A	    0x0100	 /* nAutoFd port output status */
+#define IEEE_Status_E	    0x0080	 /* nSelectIn port output status */
+#define IEEE_Status_T	    0x0040	 /* nStrobe port output status */
+#define IEEE_Status_I	    0x0020	 /* nInit port output status */
+#define IEEE_Status_B	    0x0010	 /* Busy port inout status */
+#define IEEE_Status_S	    0x0008	 /* Select port input status */
+#define IEEE_Status_K	    0x0004	 /* nAck port input status */
+#define IEEE_Status_F	    0x0002	 /* nFault port input status */
+#define IEEE_Status_R	    0x0001	 /* pError port input status */
+
+#define IEEE_IntStatus_IntReqDat	 0x0100
+#define IEEE_IntStatus_IntReqEmp	 0x0080
+#define IEEE_IntStatus_IntReqInt	 0x0040
+#define IEEE_IntStatus_IntReqRav	 0x0020
+#define IEEE_IntStatus_IntReqTim	 0x0010
+#define IEEE_IntStatus_RevAddrComp	 0x0008
+#define IEEE_IntStatus_RevDataComp	 0x0004
+#define IEEE_IntStatus_FwdAddrComp	 0x0002
+#define IEEE_IntStatus_FwdDataComp	 0x0001
+#define IEEE_FifoLevels_RevFifoLevel	 2
+#define IEEE_FifoLevels_FwdFifoLevel	 1
+#define IEEE_InitTime_TimValInit	 Fld(22,0)
+#define IEEE_TimerStatus_TimValStat	 Fld(22,0)
+#define IEEE_ReloadValue_Reload		 Fld(4,0)
+
+#define IEEE_TestControl_RegClk		 0x04
+#define IEEE_TestControl_ClockSelect	 Fld(2,1)
+#define IEEE_TestControl_TimerTestModeEn 0x01
+#define IEEE_TestCtrlIn_PError		 0x10
+#define IEEE_TestCtrlIn_nFault		 0x08
+#define IEEE_TestCtrlIn_nAck		 0x04
+#define IEEE_TestCtrlIn_PSel		 0x02
+#define IEEE_TestCtrlIn_Busy		 0x01
+
+#endif /* LANGUAGE == C */
+
+/*
+ * VGA Controller
+ *
+ * Registers
+ *    VideoControl	Video Control Register
+ *    VgaTiming0	VGA Timing Register 0
+ *    VgaTiming1	VGA Timing Register 1
+ *    VgaTiming2	VGA Timing Register 2
+ *    VgaTiming3	VGA Timing Register 3
+ *    VgaBorder		VGA Border Color Register
+ *    VgaDBAR		VGADMA Base Address Register
+ *    VgaDCAR		VGADMA Channel Current Address Register
+ *    VgaStatus		VGA Status Register
+ *    VgaInterruptMask	VGA Interrupt Mask Register
+ *    VgaPalette	VGA Palette Registers
+ *    DacControl	DAC Control Register
+ *    VgaTest		VGA Controller Test Register
+ */
+
+#define _VGA( x )	_SA1101( ( x ) + __VGA_CONTROL )
+
+#define _VideoControl	    _VGA( 0x0000 )
+#define _VgaTiming0	    _VGA( 0x0400 )
+#define _VgaTiming1	    _VGA( 0x0800 )
+#define _VgaTiming2	    _VGA( 0x0c00 )
+#define _VgaTiming3	    _VGA( 0x1000 )
+#define _VgaBorder	    _VGA( 0x1400 )
+#define _VgaDBAR	    _VGA( 0x1800 )
+#define _VgaDCAR	    _VGA( 0x1c00 )
+#define _VgaStatus	    _VGA( 0x2000 )
+#define _VgaInterruptMask   _VGA( 0x2400 )
+#define _VgaPalette	    _VGA( 0x40000 )
+#define _DacControl	    _VGA( 0x3000 )
+#define _VgaTest	    _VGA( 0x2c00 )
+
+#if (LANGUAGE == C)
+#define VideoControl   (*((volatile Word *) SA1101_p2v (_VideoControl)))
+#define VgaTiming0     (*((volatile Word *) SA1101_p2v (_VgaTiming0)))
+#define VgaTiming1     (*((volatile Word *) SA1101_p2v (_VgaTiming1)))
+#define VgaTiming2     (*((volatile Word *) SA1101_p2v (_VgaTiming2)))
+#define VgaTiming3     (*((volatile Word *) SA1101_p2v (_VgaTiming3)))
+#define VgaBorder      (*((volatile Word *) SA1101_p2v (_VgaBorder)))
+#define VgaDBAR	       (*((volatile Word *) SA1101_p2v (_VgaDBAR)))
+#define VgaDCAR	       (*((volatile Word *) SA1101_p2v (_VgaDCAR)))
+#define VgaStatus      (*((volatile Word *) SA1101_p2v (_VgaStatus)))
+#define VgaInterruptMask (*((volatile Word *) SA1101_p2v (_VgaInterruptMask)))
+#define VgaPalette     (*((volatile Word *) SA1101_p2v (_VgaPalette)))
+#define DacControl     (*((volatile Word *) SA1101_p2v (_DacControl)))
+#define VgaTest        (*((volatile Word *) SA1101_p2v (_VgaTest)))
+
+#define VideoControl_VgaEn    0x00000000
+#define VideoControl_BGR      0x00000001
+#define VideoControl_VCompVal Fld(2,2)
+#define VideoControl_VgaReq   Fld(4,4)
+#define VideoControl_VBurstL  Fld(4,8)
+#define VideoControl_VMode    (1<<12)
+#define VideoControl_PalRead  (1<<13)
+
+#define VgaTiming0_PPL	      Fld(6,2)
+#define VgaTiming0_HSW	      Fld(8,8)
+#define VgaTiming0_HFP	      Fld(8,16)
+#define VgaTiming0_HBP	      Fld(8,24)
+
+#define VgaTiming1_LPS	      Fld(10,0)
+#define VgaTiming1_VSW	      Fld(6,10)
+#define VgaTiming1_VFP	      Fld(8,16)
+#define VgaTiming1_VBP	      Fld(8,24)
+
+#define VgaTiming2_IVS	      0x01
+#define VgaTiming2_IHS	      0x02
+#define VgaTiming2_CVS	      0x04
+#define VgaTiming2_CHS	      0x08
+
+#define VgaTiming3_HBS	      Fld(8,0)
+#define VgaTiming3_HBE	      Fld(8,8)
+#define VgaTiming3_VBS	      Fld(8,16)
+#define VgaTiming3_VBE	      Fld(8,24)
+
+#define VgaBorder_BCOL	      Fld(24,0)
+
+#define VgaStatus_VFUF	      0x01
+#define VgaStatus_VNext	      0x02
+#define VgaStatus_VComp	      0x04
+
+#define VgaInterruptMask_VFUFMask   0x00
+#define VgaInterruptMask_VNextMask  0x01
+#define VgaInterruptMask_VCompMask  0x02
+
+#define VgaPalette_R	      Fld(8,0)
+#define VgaPalette_G	      Fld(8,8)
+#define VgaPalette_B	      Fld(8,16)
+
+#define DacControl_DACON      0x0001
+#define DacControl_COMPON     0x0002
+#define DacControl_PEDON      0x0004
+#define DacControl_RTrim      Fld(5,4)
+#define DacControl_GTrim      Fld(5,9)
+#define DacControl_BTrim      Fld(5,14)
+
+#define VgaTest_TDAC	      0x00
+#define VgaTest_Datatest      Fld(4,1)
+#define VgaTest_DACTESTDAC    0x10
+#define VgaTest_DACTESTOUT    Fld(3,5)
+
+#endif /* LANGUAGE == C */
+
+/*
+ * USB Host Interface Controller
+ *
+ * Registers
+ *    Revision
+ *    Control
+ *    CommandStatus
+ *    InterruptStatus
+ *    InterruptEnable
+ *    HCCA
+ *    PeriodCurrentED
+ *    ControlHeadED
+ *    BulkHeadED
+ *    BulkCurrentED
+ *    DoneHead
+ *    FmInterval
+ *    FmRemaining
+ *    FmNumber
+ *    PeriodicStart
+ *    LSThreshold
+ *    RhDescriptorA
+ *    RhDescriptorB
+ *    RhStatus
+ *    RhPortStatus
+ *    USBStatus
+ *    USBReset
+ *    USTAR
+ *    USWER
+ *    USRFR
+ *    USNFR
+ *    USTCSR
+ *    USSR
+ *    
+ */
+
+#define _USB( x )	_SA1101( ( x ) + __USB_CONTROL )
+
+
+#define _Revision	  _USB( 0x0000 )
+#define _Control	  _USB( 0x0888 )
+#define _CommandStatus	  _USB( 0x0c00 )
+#define _InterruptStatus  _USB( 0x1000 )
+#define _InterruptEnable  _USB( 0x1400 )
+#define _HCCA		  _USB( 0x1800 )
+#define _PeriodCurrentED  _USB( 0x1c00 )
+#define _ControlHeadED	  _USB( 0x2000 )
+#define _BulkHeadED	  _USB( 0x2800 )
+#define _BulkCurrentED	  _USB( 0x2c00 )
+#define _DoneHead	  _USB( 0x3000 )
+#define _FmInterval	  _USB( 0x3400 )
+#define _FmRemaining	  _USB( 0x3800 )
+#define _FmNumber	  _USB( 0x3c00 )
+#define _PeriodicStart	  _USB( 0x4000 )
+#define _LSThreshold	  _USB( 0x4400 )
+#define _RhDescriptorA	  _USB( 0x4800 )
+#define _RhDescriptorB	  _USB( 0x4c00 )
+#define _RhStatus	  _USB( 0x5000 )
+#define _RhPortStatus	  _USB( 0x5400 )
+#define _USBStatus	  _USB( 0x11800 )
+#define _USBReset	  _USB( 0x11c00 )
+
+#define _USTAR		  _USB( 0x10400 )
+#define _USWER		  _USB( 0x10800 )
+#define _USRFR		  _USB( 0x10c00 )
+#define _USNFR		  _USB( 0x11000 )
+#define _USTCSR		  _USB( 0x11400 )
+#define _USSR		  _USB( 0x11800 )
+
+
+#if (LANGUAGE == C)
+
+#define Revision	(*((volatile Word *) SA1101_p2v (_Revision)))
+#define Control		(*((volatile Word *) SA1101_p2v (_Control)))
+#define CommandStatus	(*((volatile Word *) SA1101_p2v (_CommandStatus)))
+#define InterruptStatus	(*((volatile Word *) SA1101_p2v (_InterruptStatus)))
+#define InterruptEnable	(*((volatile Word *) SA1101_p2v (_InterruptEnable)))
+#define HCCA		(*((volatile Word *) SA1101_p2v (_HCCA)))
+#define PeriodCurrentED	(*((volatile Word *) SA1101_p2v (_PeriodCurrentED)))
+#define ControlHeadED	(*((volatile Word *) SA1101_p2v (_ControlHeadED)))
+#define BulkHeadED	(*((volatile Word *) SA1101_p2v (_BulkHeadED)))
+#define BulkCurrentED	(*((volatile Word *) SA1101_p2v (_BulkCurrentED)))
+#define DoneHead	(*((volatile Word *) SA1101_p2v (_DoneHead)))
+#define FmInterval	(*((volatile Word *) SA1101_p2v (_FmInterval)))
+#define FmRemaining	(*((volatile Word *) SA1101_p2v (_FmRemaining)))
+#define FmNumber	(*((volatile Word *) SA1101_p2v (_FmNumber)))
+#define PeriodicStart	(*((volatile Word *) SA1101_p2v (_PeriodicStart)))
+#define LSThreshold	(*((volatile Word *) SA1101_p2v (_LSThreshold)))
+#define RhDescriptorA	(*((volatile Word *) SA1101_p2v (_RhDescriptorA)))
+#define RhDescriptorB	(*((volatile Word *) SA1101_p2v (_RhDescriptorB)))
+#define RhStatus	(*((volatile Word *) SA1101_p2v (_RhStatus)))
+#define RhPortStatus	(*((volatile Word *) SA1101_p2v (_RhPortStatus)))
+#define USBStatus	(*((volatile Word *) SA1101_p2v (_USBStatus)))
+#define USBReset	(*((volatile Word *) SA1101_p2v (_USBReset)))
+#define USTAR		(*((volatile Word *) SA1101_p2v (_USTAR)))
+#define USWER		(*((volatile Word *) SA1101_p2v (_USWER)))
+#define USRFR		(*((volatile Word *) SA1101_p2v (_USRFR)))
+#define USNFR		(*((volatile Word *) SA1101_p2v (_USNFR)))
+#define USTCSR		(*((volatile Word *) SA1101_p2v (_USTCSR)))
+#define USSR		(*((volatile Word *) SA1101_p2v (_USSR)))
+
+
+#define USBStatus_IrqHciRmtWkp	     (1<<7)
+#define USBStatus_IrqHciBuffAcc	     (1<<8)
+#define USBStatus_nIrqHciM	     (1<<9)
+#define USBStatus_nHciMFClr	     (1<<10)
+
+#define USBReset_ForceIfReset	     0x01
+#define USBReset_ForceHcReset	     0x02
+#define USBReset_ClkGenReset	     0x04
+
+#define USTCR_RdBstCntrl	     Fld(3,0)
+#define USTCR_ByteEnable	     Fld(4,3)
+#define USTCR_WriteEn		     (1<<7)
+#define USTCR_FifoCir		     (1<<8)
+#define USTCR_TestXferSel	     (1<<9)
+#define USTCR_FifoCirAtEnd	     (1<<10)
+#define USTCR_nSimScaleDownClk	     (1<<11)
+
+#define USSR_nAppMDEmpty	     0x01
+#define USSR_nAppMDFirst	     0x02
+#define USSR_nAppMDLast		     0x04
+#define USSR_nAppMDFull		     0x08
+#define USSR_nAppMAFull		     0x10
+#define USSR_XferReq		     0x20
+#define USSR_XferEnd		     0x40
+
+#endif /* LANGUAGE == C */
+
+
+/*
+ * Interrupt Controller
+ *
+ * Registers
+ *    INTTEST0		Test register 0
+ *    INTTEST1		Test register 1
+ *    INTENABLE0	Interrupt Enable register 0
+ *    INTENABLE1	Interrupt Enable register 1
+ *    INTPOL0		Interrupt Polarity selection 0
+ *    INTPOL1		Interrupt Polarity selection 1
+ *    INTTSTSEL		Interrupt source selection
+ *    INTSTATCLR0	Interrupt Status 0
+ *    INTSTATCLR1	Interrupt Status 1
+ *    INTSET0		Interrupt Set 0
+ *    INTSET1		Interrupt Set 1
+ */
+
+#define _INT( x )	_SA1101( ( x ) + __INTERRUPT_CONTROL)
+
+#define _INTTEST0	_INT( 0x1000 )
+#define _INTTEST1	_INT( 0x1400 )
+#define _INTENABLE0	_INT( 0x2000 )
+#define _INTENABLE1	_INT( 0x2400 )
+#define _INTPOL0	_INT( 0x3000 )
+#define _INTPOL1	_INT( 0x3400 )
+#define _INTTSTSEL     	_INT( 0x5000 )
+#define _INTSTATCLR0	_INT( 0x6000 )
+#define _INTSTATCLR1	_INT( 0x6400 )
+#define _INTSET0	_INT( 0x7000 )
+#define _INTSET1	_INT( 0x7400 )
+
+#if ( LANGUAGE == C )
+#define INTTEST0	(*((volatile Word *) SA1101_p2v (_INTTEST0)))
+#define INTTEST1	(*((volatile Word *) SA1101_p2v (_INTTEST1)))
+#define INTENABLE0	(*((volatile Word *) SA1101_p2v (_INTENABLE0)))
+#define INTENABLE1	(*((volatile Word *) SA1101_p2v (_INTENABLE1)))
+#define INTPOL0		(*((volatile Word *) SA1101_p2v (_INTPOL0)))
+#define INTPOL1		(*((volatile Word *) SA1101_p2v (_INTPOL1)))
+#define INTTSTSEL	(*((volatile Word *) SA1101_p2v (_INTTSTSEL)))
+#define INTSTATCLR0	(*((volatile Word *) SA1101_p2v (_INTSTATCLR0)))
+#define INTSTATCLR1	(*((volatile Word *) SA1101_p2v (_INTSTATCLR1)))
+#define INTSET0		(*((volatile Word *) SA1101_p2v (_INTSET0)))
+#define INTSET1		(*((volatile Word *) SA1101_p2v (_INTSET1)))
+
+#endif /* LANGUAGE == C */
+
+/*
+ * PS/2 Trackpad and Mouse Interfaces
+ *
+ * Registers   (prefix kbd applies to trackpad interface, mse to mouse)
+ *    KBDCR		Control Register
+ *    KBDSTAT		Status Register
+ *    KBDDATA		Transmit/Receive Data register
+ *    KBDCLKDIV		Clock Division Register
+ *    KBDPRECNT		Clock Precount Register
+ *    KBDTEST1		Test register 1
+ *    KBDTEST2		Test register 2
+ *    KBDTEST3		Test register 3
+ *    KBDTEST4		Test register 4
+ *    MSECR	
+ *    MSESTAT
+ *    MSEDATA
+ *    MSECLKDIV
+ *    MSEPRECNT
+ *    MSETEST1
+ *    MSETEST2
+ *    MSETEST3
+ *    MSETEST4
+ *     
+ */
+
+#define _KBD( x )	_SA1101( ( x ) + __TRACK_INTERFACE )
+#define _MSE( x )	_SA1101( ( x ) + __MOUSE_INTERFACE )
+
+#define _KBDCR		_KBD( 0x0000 )
+#define _KBDSTAT	_KBD( 0x0400 )
+#define _KBDDATA	_KBD( 0x0800 )
+#define _KBDCLKDIV	_KBD( 0x0c00 )
+#define _KBDPRECNT	_KBD( 0x1000 )
+#define	_KBDTEST1	_KBD( 0x2000 )
+#define _KBDTEST2	_KBD( 0x2400 )
+#define _KBDTEST3	_KBD( 0x2800 )
+#define _KBDTEST4	_KBD( 0x2c00 )
+#define _MSECR		_MSE( 0x0000 )
+#define _MSESTAT	_MSE( 0x0400 )
+#define _MSEDATA	_MSE( 0x0800 )
+#define _MSECLKDIV	_MSE( 0x0c00 )
+#define _MSEPRECNT	_MSE( 0x1000 )
+#define	_MSETEST1	_MSE( 0x2000 )
+#define _MSETEST2	_MSE( 0x2400 )
+#define _MSETEST3	_MSE( 0x2800 )
+#define _MSETEST4	_MSE( 0x2c00 )
+
+#if ( LANGUAGE == C )
+
+#define KBDCR	    (*((volatile Word *) SA1101_p2v (_KBDCR)))
+#define KBDSTAT	    (*((volatile Word *) SA1101_p2v (_KBDSTAT)))
+#define KBDDATA	    (*((volatile Word *) SA1101_p2v (_KBDDATA)))
+#define KBDCLKDIV   (*((volatile Word *) SA1101_p2v (_KBDCLKDIV)))
+#define KBDPRECNT   (*((volatile Word *) SA1101_p2v (_KBDPRECNT)))
+#define KBDTEST1    (*((volatile Word *) SA1101_p2v (_KBDTEST1)))
+#define KBDTEST2    (*((volatile Word *) SA1101_p2v (_KBDTEST2)))
+#define KBDTEST3    (*((volatile Word *) SA1101_p2v (_KBDTEST3)))
+#define KBDTEST4    (*((volatile Word *) SA1101_p2v (_KBDTEST4)))
+#define MSECR	    (*((volatile Word *) SA1101_p2v (_MSECR)))
+#define MSESTAT	    (*((volatile Word *) SA1101_p2v (_MSESTAT)))
+#define MSEDATA	    (*((volatile Word *) SA1101_p2v (_MSEDATA)))
+#define MSECLKDIV   (*((volatile Word *) SA1101_p2v (_MSECLKDIV)))
+#define MSEPRECNT   (*((volatile Word *) SA1101_p2v (_MSEPRECNT)))
+#define MSETEST1    (*((volatile Word *) SA1101_p2v (_MSETEST1)))
+#define MSETEST2    (*((volatile Word *) SA1101_p2v (_MSETEST2)))
+#define MSETEST3    (*((volatile Word *) SA1101_p2v (_MSETEST3)))
+#define MSETEST4    (*((volatile Word *) SA1101_p2v (_MSETEST4)))
+
+
+#define KBDCR_ENA		 0x08
+#define KBDCR_FKD		 0x02
+#define KBDCR_FKC		 0x01
+
+#define KBDSTAT_TXE		 0x80
+#define KBDSTAT_TXB		 0x40
+#define KBDSTAT_RXF		 0x20
+#define KBDSTAT_RXB		 0x10
+#define KBDSTAT_ENA		 0x08
+#define KBDSTAT_RXP		 0x04
+#define KBDSTAT_KBD		 0x02
+#define KBDSTAT_KBC		 0x01
+
+#define KBDCLKDIV_DivVal	 Fld(4,0)
+
+#define MSECR_ENA		 0x08
+#define MSECR_FKD		 0x02
+#define MSECR_FKC		 0x01
+
+#define MSESTAT_TXE		 0x80
+#define MSESTAT_TXB		 0x40
+#define MSESTAT_RXF		 0x20
+#define MSESTAT_RXB		 0x10
+#define MSESTAT_ENA		 0x08
+#define MSESTAT_RXP		 0x04	
+#define MSESTAT_MSD		 0x02
+#define MSESTAT_MSC		 0x01
+
+#define MSECLKDIV_DivVal	 Fld(4,0)
+
+#define KBDTEST1_CD		 0x80
+#define KBDTEST1_RC1		 0x40
+#define KBDTEST1_MC		 0x20
+#define KBDTEST1_C		 Fld(2,3)
+#define KBDTEST1_T2		 0x40
+#define KBDTEST1_T1		 0x20
+#define KBDTEST1_T0		 0x10
+#define KBDTEST2_TICBnRES	 0x08
+#define KBDTEST2_RKC		 0x04
+#define KBDTEST2_RKD		 0x02
+#define KBDTEST2_SEL		 0x01
+#define KBDTEST3_ms_16		 0x80
+#define KBDTEST3_us_64		 0x40
+#define KBDTEST3_us_16		 0x20
+#define KBDTEST3_DIV8		 0x10
+#define KBDTEST3_DIn		 0x08
+#define KBDTEST3_CIn		 0x04
+#define KBDTEST3_KD		 0x02
+#define KBDTEST3_KC		 0x01
+#define KBDTEST4_BC12		 0x80
+#define KBDTEST4_BC11		 0x40
+#define KBDTEST4_TRES		 0x20
+#define KBDTEST4_CLKOE		 0x10
+#define KBDTEST4_CRES		 0x08
+#define KBDTEST4_RXB		 0x04
+#define KBDTEST4_TXB		 0x02
+#define KBDTEST4_SRX		 0x01
+
+#define MSETEST1_CD		 0x80
+#define MSETEST1_RC1		 0x40
+#define MSETEST1_MC		 0x20
+#define MSETEST1_C		 Fld(2,3)
+#define MSETEST1_T2		 0x40
+#define MSETEST1_T1		 0x20
+#define MSETEST1_T0		 0x10
+#define MSETEST2_TICBnRES	 0x08
+#define MSETEST2_RKC		 0x04
+#define MSETEST2_RKD		 0x02
+#define MSETEST2_SEL		 0x01
+#define MSETEST3_ms_16		 0x80
+#define MSETEST3_us_64		 0x40
+#define MSETEST3_us_16		 0x20
+#define MSETEST3_DIV8		 0x10
+#define MSETEST3_DIn		 0x08
+#define MSETEST3_CIn		 0x04
+#define MSETEST3_KD		 0x02
+#define MSETEST3_KC		 0x01
+#define MSETEST4_BC12		 0x80
+#define MSETEST4_BC11		 0x40
+#define MSETEST4_TRES		 0x20
+#define MSETEST4_CLKOE		 0x10
+#define MSETEST4_CRES		 0x08
+#define MSETEST4_RXB		 0x04
+#define MSETEST4_TXB		 0x02
+#define MSETEST4_SRX		 0x01
+
+#endif  /* LANGUAGE == C */
+
+
+/*
+ * General-Purpose I/O Interface
+ *
+ * Registers
+ *    PADWR	Port A Data Write Register
+ *    PBDWR	Port B Data Write Register
+ *    PADRR	Port A Data Read Register
+ *    PBDRR	Port B Data Read Register
+ *    PADDR	Port A Data Direction Register
+ *    PBDDR	Port B Data Direction Register
+ *    PASSR	Port A Sleep State Register
+ *    PBSSR	Port B Sleep State Register
+ *
+ */
+
+#define _PIO( x )      _SA1101( ( x ) + __GPIO_INTERFACE )
+
+#define _PADWR	       _PIO( 0x0000 )
+#define _PBDWR	       _PIO( 0x0400 )
+#define _PADRR	       _PIO( 0x0000 )
+#define _PBDRR	       _PIO( 0x0400 )
+#define _PADDR	       _PIO( 0x0800 )
+#define _PBDDR	       _PIO( 0x0c00 )
+#define _PASSR	       _PIO( 0x1000 )
+#define _PBSSR	       _PIO( 0x1400 )
+
+
+#if ( LANGUAGE == C )
+
+
+#define PADWR	    (*((volatile Word *) SA1101_p2v (_PADWR)))
+#define PBDWR	    (*((volatile Word *) SA1101_p2v (_PBDWR)))
+#define PADRR	    (*((volatile Word *) SA1101_p2v (_PADRR)))
+#define PBDRR	    (*((volatile Word *) SA1101_p2v (_PBDRR)))
+#define PADDR	    (*((volatile Word *) SA1101_p2v (_PADDR)))
+#define PBDDR	    (*((volatile Word *) SA1101_p2v (_PBDDR)))
+#define PASSR	    (*((volatile Word *) SA1101_p2v (_PASSR)))
+#define PBSSR	    (*((volatile Word *) SA1101_p2v (_PBSSR)))
+
+#endif
+
+
+
+/*
+ * Keypad Interface
+ *
+ * Registers
+ *    PXDWR
+ *    PXDRR
+ *    PYDWR
+ *    PYDRR
+ *
+ */
+
+#define _KEYPAD( x )	_SA1101( ( x ) + __KEYPAD_INTERFACE ) 
+
+#define _PXDWR	   _KEYPAD( 0x0000 )
+#define _PXDRR	   _KEYPAD( 0x0000 )
+#define _PYDWR	   _KEYPAD( 0x0400 )
+#define _PYDRR	   _KEYPAD( 0x0400 )
+
+#if ( LANGUAGE == C )
+
+
+#define PXDWR	    (*((volatile Word *) SA1101_p2v (_PXDWR)))
+#define PXDRR	    (*((volatile Word *) SA1101_p2v (_PXDRR)))
+#define PYDWR	    (*((volatile Word *) SA1101_p2v (_PYDWR)))
+#define PYDRR	    (*((volatile Word *) SA1101_p2v (_PYDRR)))
+
+#endif
+
+
+
+/*
+ * PCMCIA Interface
+ *
+ * Registers
+ *    PCSR	Status Register
+ *    PCCR	Control Register
+ *    PCSSR	Sleep State Register
+ *
+ */
+
+#define _CARD( x )	_SA1101( ( x ) + __PCMCIA_INTERFACE )
+
+#define _PCSR	   _CARD( 0x0000 )
+#define _PCCR	   _CARD( 0x0400 )
+#define _PCSSR	   _CARD( 0x0800 )
+
+#if ( LANGUAGE == C )
+#define PCSR    (*((volatile Word *) SA1101_p2v (_PCSR)))
+#define PCCR	(*((volatile Word *) SA1101_p2v (_PCCR)))
+#define PCSSR	(*((volatile Word *) SA1101_p2v (_PCSSR)))
+
+#define PCSR_S0_ready		0x0001
+#define PCSR_S1_ready		0x0002
+#define PCSR_S0_detected	0x0004
+#define PCSR_S1_detected	0x0008
+#define PCSR_S0_VS1		0x0010
+#define PCSR_S0_VS2		0x0020
+#define PCSR_S1_VS1		0x0040
+#define PCSR_S1_VS2		0x0080
+#define PCSR_S0_WP		0x0100
+#define PCSR_S1_WP		0x0200
+#define PCSR_S0_BVD1_nSTSCHG	0x0400
+#define PCSR_S0_BVD2_nSPKR	0x0800
+#define PCSR_S1_BVD1_nSTSCHG	0x1000
+#define PCSR_S1_BVD2_nSPKR	0x2000
+
+#define PCCR_S0_VPP0		0x0001
+#define PCCR_S0_VPP1		0x0002
+#define PCCR_S0_VCC0		0x0004
+#define PCCR_S0_VCC1		0x0008
+#define PCCR_S1_VPP0		0x0010
+#define PCCR_S1_VPP1		0x0020
+#define PCCR_S1_VCC0		0x0040
+#define PCCR_S1_VCC1		0x0080
+#define PCCR_S0_reset		0x0100
+#define PCCR_S1_reset		0x0200
+#define PCCR_S0_float		0x0400
+#define PCCR_S1_float		0x0800
+
+#define PCSSR_S0_VCC0		0x0001
+#define PCSSR_S0_VCC1		0x0002
+#define PCSSR_S0_VPP0		0x0004
+#define PCSSR_S0_VPP1		0x0008
+#define PCSSR_S0_control	0x0010
+#define PCSSR_S1_VCC0		0x0020
+#define PCSSR_S1_VCC1		0x0040
+#define PCSSR_S1_VPP0		0x0080
+#define PCSSR_S1_VPP1		0x0100
+#define PCSSR_S1_control	0x0200
+
+#endif
+
+#undef C
+#undef Assembly
diff --git a/include/asm-arm/arch-sa1100/SA-1111.h b/arch/arm/mach-sa1100/include/mach/SA-1111.h
similarity index 100%
rename from include/asm-arm/arch-sa1100/SA-1111.h
rename to arch/arm/mach-sa1100/include/mach/SA-1111.h
diff --git a/arch/arm/mach-sa1100/include/mach/assabet.h b/arch/arm/mach-sa1100/include/mach/assabet.h
new file mode 100644
index 0000000..3959b20
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/assabet.h
@@ -0,0 +1,105 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/assabet.h
+ *
+ * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
+ *
+ * This file contains the hardware specific definitions for Assabet
+ * Only include this file from SA1100-specific files.
+ *
+ * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
+ *      Definitions for Neponset added.
+ */
+#ifndef __ASM_ARCH_ASSABET_H
+#define __ASM_ARCH_ASSABET_H
+
+
+/* System Configuration Register flags */
+
+#define ASSABET_SCR_SDRAM_LOW	(1<<2)	/* SDRAM size (low bit) */
+#define ASSABET_SCR_SDRAM_HIGH	(1<<3)	/* SDRAM size (high bit) */
+#define ASSABET_SCR_FLASH_LOW	(1<<4)	/* Flash size (low bit) */
+#define ASSABET_SCR_FLASH_HIGH	(1<<5)	/* Flash size (high bit) */
+#define ASSABET_SCR_GFX		(1<<8)	/* Graphics Accelerator (0 = present) */
+#define ASSABET_SCR_SA1111	(1<<9)	/* Neponset (0 = present) */
+
+#define ASSABET_SCR_INIT	-1
+
+extern unsigned long SCR_value;
+
+#ifdef CONFIG_ASSABET_NEPONSET
+#define machine_has_neponset()  ((SCR_value & ASSABET_SCR_SA1111) == 0)
+#else
+#define machine_has_neponset()	(0)
+#endif
+
+/* Board Control Register */
+
+#define ASSABET_BCR_BASE  0xf1000000
+#define ASSABET_BCR (*(volatile unsigned int *)(ASSABET_BCR_BASE))
+
+#define ASSABET_BCR_CF_PWR	(1<<0)	/* Compact Flash Power (1 = 3.3v, 0 = off) */
+#define ASSABET_BCR_CF_RST	(1<<1)	/* Compact Flash Reset (1 = power up reset) */
+#define ASSABET_BCR_GFX_RST	(1<<1)	/* Graphics Accelerator Reset (0 = hold reset) */
+#define ASSABET_BCR_CODEC_RST	(1<<2)	/* 0 = Holds UCB1300, ADI7171, and UDA1341 in reset */
+#define ASSABET_BCR_IRDA_FSEL	(1<<3)	/* IRDA Frequency select (0 = SIR, 1 = MIR/ FIR) */
+#define ASSABET_BCR_IRDA_MD0	(1<<4)	/* Range/Power select */
+#define ASSABET_BCR_IRDA_MD1	(1<<5)	/* Range/Power select */
+#define ASSABET_BCR_STEREO_LB	(1<<6)	/* Stereo Loopback */
+#define ASSABET_BCR_CF_BUS_OFF	(1<<7)	/* Compact Flash bus (0 = on, 1 = off (float)) */
+#define ASSABET_BCR_AUDIO_ON	(1<<8)	/* Audio power on */
+#define ASSABET_BCR_LIGHT_ON	(1<<9)	/* Backlight */
+#define ASSABET_BCR_LCD_12RGB	(1<<10)	/* 0 = 16RGB, 1 = 12RGB */
+#define ASSABET_BCR_LCD_ON	(1<<11)	/* LCD power on */
+#define ASSABET_BCR_RS232EN	(1<<12)	/* RS232 transceiver enable */
+#define ASSABET_BCR_LED_RED	(1<<13)	/* D9 (0 = on, 1 = off) */
+#define ASSABET_BCR_LED_GREEN	(1<<14)	/* D8 (0 = on, 1 = off) */
+#define ASSABET_BCR_VIB_ON	(1<<15)	/* Vibration motor (quiet alert) */
+#define ASSABET_BCR_COM_DTR	(1<<16)	/* COMport Data Terminal Ready */
+#define ASSABET_BCR_COM_RTS	(1<<17)	/* COMport Request To Send */
+#define ASSABET_BCR_RAD_WU	(1<<18)	/* Radio wake up interrupt */
+#define ASSABET_BCR_SMB_EN	(1<<19)	/* System management bus enable */
+#define ASSABET_BCR_TV_IR_DEC	(1<<20)	/* TV IR Decode Enable (not implemented) */
+#define ASSABET_BCR_QMUTE	(1<<21)	/* Quick Mute */
+#define ASSABET_BCR_RAD_ON	(1<<22)	/* Radio Power On */
+#define ASSABET_BCR_SPK_OFF	(1<<23)	/* 1 = Speaker amplifier power off */
+
+#ifdef CONFIG_SA1100_ASSABET
+extern void ASSABET_BCR_frob(unsigned int mask, unsigned int set);
+#else
+#define ASSABET_BCR_frob(x,y)	do { } while (0)
+#endif
+
+#define ASSABET_BCR_set(x)	ASSABET_BCR_frob((x), (x))
+#define ASSABET_BCR_clear(x)	ASSABET_BCR_frob((x), 0)
+
+#define ASSABET_BSR_BASE	0xf1000000
+#define ASSABET_BSR (*(volatile unsigned int*)(ASSABET_BSR_BASE))
+
+#define ASSABET_BSR_RS232_VALID	(1 << 24)
+#define ASSABET_BSR_COM_DCD	(1 << 25)
+#define ASSABET_BSR_COM_CTS	(1 << 26)
+#define ASSABET_BSR_COM_DSR	(1 << 27)
+#define ASSABET_BSR_RAD_CTS	(1 << 28)
+#define ASSABET_BSR_RAD_DSR	(1 << 29)
+#define ASSABET_BSR_RAD_DCD	(1 << 30)
+#define ASSABET_BSR_RAD_RI	(1 << 31)
+
+
+/* GPIOs for which the generic definition doesn't say much */
+#define ASSABET_GPIO_RADIO_IRQ		GPIO_GPIO (14)	/* Radio interrupt request  */
+#define ASSABET_GPIO_PS_MODE_SYNC	GPIO_GPIO (16)	/* Power supply mode/sync   */
+#define ASSABET_GPIO_STEREO_64FS_CLK	GPIO_GPIO (19)	/* SSP UDA1341 clock input  */
+#define ASSABET_GPIO_CF_IRQ		GPIO_GPIO (21)	/* CF IRQ   */
+#define ASSABET_GPIO_CF_CD		GPIO_GPIO (22)	/* CF CD */
+#define ASSABET_GPIO_CF_BVD2		GPIO_GPIO (24)	/* CF BVD */
+#define ASSABET_GPIO_GFX_IRQ		GPIO_GPIO (24)	/* Graphics IRQ */
+#define ASSABET_GPIO_CF_BVD1		GPIO_GPIO (25)	/* CF BVD */
+#define ASSABET_GPIO_BATT_LOW		GPIO_GPIO (26)	/* Low battery */
+#define ASSABET_GPIO_RCLK		GPIO_GPIO (26)	/* CCLK/2  */
+
+#define ASSABET_IRQ_GPIO_CF_IRQ		IRQ_GPIO21
+#define ASSABET_IRQ_GPIO_CF_CD		IRQ_GPIO22
+#define ASSABET_IRQ_GPIO_CF_BVD2	IRQ_GPIO24
+#define ASSABET_IRQ_GPIO_CF_BVD1	IRQ_GPIO25
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/badge4.h b/arch/arm/mach-sa1100/include/mach/badge4.h
new file mode 100644
index 0000000..44d2e1b
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/badge4.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/badge4.h
+ *
+ *   Tim Connors <connors@hpl.hp.com>
+ *   Christopher Hoover <ch@hpl.hp.com>
+ *
+ * Copyright (C) 2002 Hewlett-Packard Company
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#error "include <mach/hardware.h> instead"
+#endif
+
+#define BADGE4_SA1111_BASE		(0x48000000)
+
+/* GPIOs on the BadgePAD 4 */
+#define BADGE4_GPIO_INT_1111		GPIO_GPIO0   /* SA-1111 IRQ */
+
+#define BADGE4_GPIO_INT_VID		GPIO_GPIO1   /* Video expansion */
+#define BADGE4_GPIO_LGP2		GPIO_GPIO2   /* GPIO_LDD8 */
+#define BADGE4_GPIO_LGP3		GPIO_GPIO3   /* GPIO_LDD9 */
+#define BADGE4_GPIO_LGP4		GPIO_GPIO4   /* GPIO_LDD10 */
+#define BADGE4_GPIO_LGP5		GPIO_GPIO5   /* GPIO_LDD11 */
+#define BADGE4_GPIO_LGP6		GPIO_GPIO6   /* GPIO_LDD12 */
+#define BADGE4_GPIO_LGP7		GPIO_GPIO7   /* GPIO_LDD13 */
+#define BADGE4_GPIO_LGP8		GPIO_GPIO8   /* GPIO_LDD14 */
+#define BADGE4_GPIO_LGP9		GPIO_GPIO9   /* GPIO_LDD15 */
+#define BADGE4_GPIO_GPA_VID		GPIO_GPIO10  /* Video expansion */
+#define BADGE4_GPIO_GPB_VID		GPIO_GPIO11  /* Video expansion */
+#define BADGE4_GPIO_GPC_VID		GPIO_GPIO12  /* Video expansion */
+
+#define BADGE4_GPIO_UART_HS1		GPIO_GPIO13
+#define BADGE4_GPIO_UART_HS2		GPIO_GPIO14
+
+#define BADGE4_GPIO_MUXSEL0		GPIO_GPIO15
+#define BADGE4_GPIO_TESTPT_J7		GPIO_GPIO16
+
+#define BADGE4_GPIO_SDSDA		GPIO_GPIO17  /* SDRAM SPD Data */
+#define BADGE4_GPIO_SDSCL		GPIO_GPIO18  /* SDRAM SPD Clock */
+#define BADGE4_GPIO_SDTYP0		GPIO_GPIO19  /* SDRAM Type Control */
+#define BADGE4_GPIO_SDTYP1		GPIO_GPIO20  /* SDRAM Type Control */
+
+#define BADGE4_GPIO_BGNT_1111		GPIO_GPIO21  /* GPIO_MBGNT */
+#define BADGE4_GPIO_BREQ_1111		GPIO_GPIO22  /* GPIO_TREQA */
+
+#define BADGE4_GPIO_TESTPT_J6		GPIO_GPIO23
+
+#define BADGE4_GPIO_PCMEN5V		GPIO_GPIO24  /* 5V power */
+
+#define BADGE4_GPIO_SA1111_NRST		GPIO_GPIO25  /* SA-1111 nRESET */
+
+#define BADGE4_GPIO_TESTPT_J5		GPIO_GPIO26
+
+#define BADGE4_GPIO_CLK_1111		GPIO_GPIO27  /* GPIO_32_768kHz */
+
+/* Interrupts on the BadgePAD 4 */
+#define BADGE4_IRQ_GPIO_SA1111		IRQ_GPIO0    /* SA-1111 interrupt */
+
+
+/* PCM5ENV Usage tracking */
+
+#define BADGE4_5V_PCMCIA_SOCK0		(1<<0)
+#define BADGE4_5V_PCMCIA_SOCK1		(1<<1)
+#define BADGE4_5V_PCMCIA_SOCK(n)	(1<<(n))
+#define BADGE4_5V_USB			(1<<2)
+#define BADGE4_5V_INITIALLY		(1<<3)
+
+#ifndef __ASSEMBLY__
+extern void badge4_set_5V(unsigned subsystem, int on);
+#endif
diff --git a/include/asm-arm/arch-pxa/bitfield.h b/arch/arm/mach-sa1100/include/mach/bitfield.h
similarity index 100%
copy from include/asm-arm/arch-pxa/bitfield.h
copy to arch/arm/mach-sa1100/include/mach/bitfield.h
diff --git a/arch/arm/mach-sa1100/include/mach/cerf.h b/arch/arm/mach-sa1100/include/mach/cerf.h
new file mode 100644
index 0000000..c3ac3d0
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/cerf.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/cerf.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Apr-2003 : Removed some old PDA crud [FB]
+ */
+#ifndef _INCLUDE_CERF_H_
+#define _INCLUDE_CERF_H_
+
+
+#define CERF_ETH_IO			0xf0000000
+#define CERF_ETH_IRQ IRQ_GPIO26
+
+#define CERF_GPIO_CF_BVD2		GPIO_GPIO (19)
+#define CERF_GPIO_CF_BVD1		GPIO_GPIO (20)
+#define CERF_GPIO_CF_RESET		GPIO_GPIO (21)
+#define CERF_GPIO_CF_IRQ		GPIO_GPIO (22)
+#define CERF_GPIO_CF_CD			GPIO_GPIO (23)
+
+#define CERF_IRQ_GPIO_CF_BVD2		IRQ_GPIO19
+#define CERF_IRQ_GPIO_CF_BVD1		IRQ_GPIO20
+#define CERF_IRQ_GPIO_CF_IRQ		IRQ_GPIO22
+#define CERF_IRQ_GPIO_CF_CD		IRQ_GPIO23
+
+#endif // _INCLUDE_CERF_H_
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
new file mode 100644
index 0000000..69e9624
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/collie.h
+ *
+ * This file contains the hardware specific definitions for Assabet
+ * Only include this file from SA1100-specific files.
+ *
+ * ChangeLog:
+ *   04-06-2001 Lineo Japan, Inc.
+ *   04-16-2001 SHARP Corporation
+ *   07-07-2002 Chris Larson <clarson@digi.com>
+ *
+ */
+#ifndef __ASM_ARCH_COLLIE_H
+#define __ASM_ARCH_COLLIE_H
+
+
+#define COLLIE_SCP_CHARGE_ON	SCOOP_GPCR_PA11
+#define COLLIE_SCP_DIAG_BOOT1	SCOOP_GPCR_PA12
+#define COLLIE_SCP_DIAG_BOOT2	SCOOP_GPCR_PA13
+#define COLLIE_SCP_MUTE_L	SCOOP_GPCR_PA14
+#define COLLIE_SCP_MUTE_R	SCOOP_GPCR_PA15
+#define COLLIE_SCP_5VON		SCOOP_GPCR_PA16
+#define COLLIE_SCP_AMP_ON	SCOOP_GPCR_PA17
+#define COLLIE_SCP_VPEN		SCOOP_GPCR_PA18
+#define COLLIE_SCP_LB_VOL_CHG	SCOOP_GPCR_PA19
+
+#define COLLIE_SCOOP_IO_DIR	( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
+				COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | COLLIE_SCP_VPEN | \
+				COLLIE_SCP_LB_VOL_CHG )
+#define COLLIE_SCOOP_IO_OUT	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | COLLIE_SCP_VPEN | \
+				COLLIE_SCP_CHARGE_ON )
+
+/* GPIOs for which the generic definition doesn't say much */
+
+#define COLLIE_GPIO_ON_KEY		GPIO_GPIO (0)
+#define COLLIE_GPIO_AC_IN		GPIO_GPIO (1)
+#define COLLIE_GPIO_SDIO_INT		GPIO_GPIO (11)
+#define COLLIE_GPIO_CF_IRQ		GPIO_GPIO (14)
+#define COLLIE_GPIO_nREMOCON_INT	GPIO_GPIO (15)
+#define COLLIE_GPIO_UCB1x00_RESET	GPIO_GPIO (16)
+#define COLLIE_GPIO_nMIC_ON		GPIO_GPIO (17)
+#define COLLIE_GPIO_nREMOCON_ON		GPIO_GPIO (18)
+#define COLLIE_GPIO_CO			GPIO_GPIO (20)
+#define COLLIE_GPIO_MCP_CLK		GPIO_GPIO (21)
+#define COLLIE_GPIO_CF_CD		GPIO_GPIO (22)
+#define COLLIE_GPIO_UCB1x00_IRQ		GPIO_GPIO (23)
+#define COLLIE_GPIO_WAKEUP		GPIO_GPIO (24)
+#define COLLIE_GPIO_GA_INT		GPIO_GPIO (25)
+#define COLLIE_GPIO_MAIN_BAT_LOW	GPIO_GPIO (26)
+
+/* Interrupts */
+
+#define COLLIE_IRQ_GPIO_ON_KEY		IRQ_GPIO0
+#define COLLIE_IRQ_GPIO_AC_IN		IRQ_GPIO1
+#define COLLIE_IRQ_GPIO_SDIO_IRQ	IRQ_GPIO11
+#define COLLIE_IRQ_GPIO_CF_IRQ		IRQ_GPIO14
+#define COLLIE_IRQ_GPIO_nREMOCON_INT	IRQ_GPIO15
+#define COLLIE_IRQ_GPIO_CO		IRQ_GPIO20
+#define COLLIE_IRQ_GPIO_CF_CD		IRQ_GPIO22
+#define COLLIE_IRQ_GPIO_UCB1x00_IRQ	IRQ_GPIO23
+#define COLLIE_IRQ_GPIO_WAKEUP		IRQ_GPIO24
+#define COLLIE_IRQ_GPIO_GA_INT		IRQ_GPIO25
+#define COLLIE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO26
+
+#define COLLIE_LCM_IRQ_GPIO_RTS		IRQ_LOCOMO_GPIO0
+#define COLLIE_LCM_IRQ_GPIO_CTS		IRQ_LOCOMO_GPIO1
+#define COLLIE_LCM_IRQ_GPIO_DSR		IRQ_LOCOMO_GPIO2
+#define COLLIE_LCM_IRQ_GPIO_DTR		IRQ_LOCOMO_GPIO3
+#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT	IRQ_LOCOMO_GPIO13
+#define COLLIE_LCM_IRQ_GPIO_nSD_WP	IRQ_LOCOMO_GPIO14
+
+/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
+#define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0	/* GPIO0=Version                 */
+#define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1	/* GPIO1=TBL_CHK                 */
+#define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2	/* GPIO2=VPNE_ON                 */
+#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3	/* GPIO3=IR_ON                   */
+#define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4	/* GPIO4=AMP_ON                  */
+#define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5	/* GPIO5=Version                 */
+#define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5	/* GPIO5=fs 8k LPF               */
+#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6	/* GPIO6=BUZZER BIAS             */
+#define COLLIE_TC35143_GPIO_MBAT_ON     UCB_IO_7	/* GPIO7=MBAT_ON                 */
+#define COLLIE_TC35143_GPIO_BBAT_ON     UCB_IO_8	/* GPIO8=BBAT_ON                 */
+#define COLLIE_TC35143_GPIO_TMP_ON      UCB_IO_9	/* GPIO9=TMP_ON                  */
+#define COLLIE_TC35143_GPIO_IN		( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 )
+#define COLLIE_TC35143_GPIO_OUT		( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \
+					UCB_IO_7 | UCB_IO_8 | UCB_IO_9 )
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
new file mode 100644
index 0000000..1f0634d
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -0,0 +1,58 @@
+/* arch/arm/mach-sa1100/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+#include <mach/hardware.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x80000000	@ physical base address
+		movne	\rx, #0xf8000000	@ virtual address
+
+		@ We probe for the active serial port here, coherently with
+		@ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h.
+		@ We assume r1 can be clobbered.
+
+		@ see if Ser3 is active
+		add	\rx, \rx, #0x00050000
+		ldr	r1, [\rx, #UTCR3]
+		tst	r1, #UTCR3_TXE
+
+		@ if Ser3 is inactive, then try Ser1
+		addeq	\rx, \rx, #(0x00010000 - 0x00050000)
+		ldreq	r1, [\rx, #UTCR3]
+		tsteq	r1, #UTCR3_TXE
+
+		@ if Ser1 is inactive, then try Ser2
+		addeq	\rx, \rx, #(0x00030000 - 0x00010000)
+		ldreq	r1, [\rx, #UTCR3]
+		tsteq	r1, #UTCR3_TXE
+
+		@ if all ports are inactive, then there is nothing we can do
+		moveq	pc, lr
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #UTDR]
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #UTSR1]
+		tst	\rd, #UTSR1_TNF
+		beq	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #UTSR1]
+		tst	\rd, #UTSR1_TBY
+		bne	1001b
+		.endm
diff --git a/arch/arm/mach-sa1100/include/mach/dma.h b/arch/arm/mach-sa1100/include/mach/dma.h
new file mode 100644
index 0000000..dda1b35
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/dma.h
@@ -0,0 +1,117 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/dma.h
+ *
+ * Generic SA1100 DMA support
+ *
+ * Copyright (C) 2000 Nicolas Pitre
+ *
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include "hardware.h"
+
+
+/*
+ * The SA1100 has six internal DMA channels.
+ */
+#define SA1100_DMA_CHANNELS	6
+
+/*
+ * Maximum physical DMA buffer size
+ */
+#define MAX_DMA_SIZE		0x1fff
+#define CUT_DMA_SIZE		0x1000
+
+/*
+ * All possible SA1100 devices a DMA channel can be attached to.
+ */
+typedef enum {
+	DMA_Ser0UDCWr  = DDAR_Ser0UDCWr,   /* Ser. port 0 UDC Write */
+	DMA_Ser0UDCRd  = DDAR_Ser0UDCRd,   /* Ser. port 0 UDC Read */
+	DMA_Ser1UARTWr = DDAR_Ser1UARTWr,  /* Ser. port 1 UART Write */
+	DMA_Ser1UARTRd = DDAR_Ser1UARTRd,  /* Ser. port 1 UART Read */
+	DMA_Ser1SDLCWr = DDAR_Ser1SDLCWr,  /* Ser. port 1 SDLC Write */
+	DMA_Ser1SDLCRd = DDAR_Ser1SDLCRd,  /* Ser. port 1 SDLC Read */
+	DMA_Ser2UARTWr = DDAR_Ser2UARTWr,  /* Ser. port 2 UART Write */
+	DMA_Ser2UARTRd = DDAR_Ser2UARTRd,  /* Ser. port 2 UART Read */
+	DMA_Ser2HSSPWr = DDAR_Ser2HSSPWr,  /* Ser. port 2 HSSP Write */
+	DMA_Ser2HSSPRd = DDAR_Ser2HSSPRd,  /* Ser. port 2 HSSP Read */
+	DMA_Ser3UARTWr = DDAR_Ser3UARTWr,  /* Ser. port 3 UART Write */
+	DMA_Ser3UARTRd = DDAR_Ser3UARTRd,  /* Ser. port 3 UART Read */
+	DMA_Ser4MCP0Wr = DDAR_Ser4MCP0Wr,  /* Ser. port 4 MCP 0 Write (audio) */
+	DMA_Ser4MCP0Rd = DDAR_Ser4MCP0Rd,  /* Ser. port 4 MCP 0 Read (audio) */
+	DMA_Ser4MCP1Wr = DDAR_Ser4MCP1Wr,  /* Ser. port 4 MCP 1 Write */
+	DMA_Ser4MCP1Rd = DDAR_Ser4MCP1Rd,  /* Ser. port 4 MCP 1 Read */
+	DMA_Ser4SSPWr  = DDAR_Ser4SSPWr,   /* Ser. port 4 SSP Write (16 bits) */
+	DMA_Ser4SSPRd  = DDAR_Ser4SSPRd    /* Ser. port 4 SSP Read (16 bits) */
+} dma_device_t;
+
+typedef struct {
+	volatile u_long DDAR;
+	volatile u_long SetDCSR;
+	volatile u_long ClrDCSR;
+	volatile u_long RdDCSR;
+	volatile dma_addr_t DBSA;
+	volatile u_long DBTA;
+	volatile dma_addr_t DBSB;
+	volatile u_long DBTB;
+} dma_regs_t;
+
+typedef void (*dma_callback_t)(void *data);
+
+/*
+ * DMA function prototypes
+ */
+
+extern int sa1100_request_dma( dma_device_t device, const char *device_id,
+			       dma_callback_t callback, void *data,
+			       dma_regs_t **regs );
+extern void sa1100_free_dma( dma_regs_t *regs );
+extern int sa1100_start_dma( dma_regs_t *regs, dma_addr_t dma_ptr, u_int size );
+extern dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs);
+extern void sa1100_reset_dma(dma_regs_t *regs);
+
+/**
+ * 	sa1100_stop_dma - stop DMA in progress
+ * 	@regs: identifier for the channel to use
+ *
+ * 	This stops DMA without clearing buffer pointers. Unlike
+ * 	sa1100_clear_dma() this allows subsequent use of sa1100_resume_dma()
+ * 	or sa1100_get_dma_pos().
+ *
+ * 	The @regs identifier is provided by a successful call to
+ * 	sa1100_request_dma().
+ **/
+
+#define sa1100_stop_dma(regs)	((regs)->ClrDCSR = DCSR_IE|DCSR_RUN)
+
+/**
+ * 	sa1100_resume_dma - resume DMA on a stopped channel
+ * 	@regs: identifier for the channel to use
+ *
+ * 	This resumes DMA on a channel previously stopped with
+ * 	sa1100_stop_dma().
+ *
+ * 	The @regs identifier is provided by a successful call to
+ * 	sa1100_request_dma().
+ **/
+
+#define sa1100_resume_dma(regs)	((regs)->SetDCSR = DCSR_IE|DCSR_RUN)
+
+/**
+ * 	sa1100_clear_dma - clear DMA pointers
+ * 	@regs: identifier for the channel to use
+ *
+ * 	This clear any DMA state so the DMA engine is ready to restart
+ * 	with new buffers through sa1100_start_dma(). Any buffers in flight
+ * 	are discarded.
+ *
+ * 	The @regs identifier is provided by a successful call to
+ * 	sa1100_request_dma().
+ **/
+
+#define sa1100_clear_dma(regs)	((regs)->ClrDCSR = DCSR_IE|DCSR_RUN|DCSR_STRTA|DCSR_STRTB)
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-sa1100/include/mach/entry-macro.S b/arch/arm/mach-sa1100/include/mach/entry-macro.S
new file mode 100644
index 0000000..6aa13c4
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/entry-macro.S
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for SA1100-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+ 		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		mov	\base, #0xfa000000		@ ICIP = 0xfa050000
+		add	\base, \base, #0x00050000
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, [\base]		@ get irqs
+		ldr	\irqnr, [\base, #4]		@ ICMR = 0xfa050004
+		ands	\irqstat, \irqstat, \irqnr
+		mov	\irqnr, #0
+		beq	1001f
+		tst	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tsteq	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tsteq	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tst	\irqstat, #0x0f
+		moveq	\irqstat, \irqstat, lsr #4
+		addeq	\irqnr, \irqnr, #4
+		tst	\irqstat, #0x03
+		moveq	\irqstat, \irqstat, lsr #2
+		addeq	\irqnr, \irqnr, #2
+		tst	\irqstat, #0x01
+		addeqs	\irqnr, \irqnr, #1
+1001:
+		.endm
+
diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h
new file mode 100644
index 0000000..582a0c9
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/gpio.h
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/gpio.h
+ *
+ * SA1100 GPIO wrappers for arch-neutral GPIO calls
+ *
+ * Written by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_SA1100_GPIO_H
+#define __ASM_ARCH_SA1100_GPIO_H
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm-generic/gpio.h>
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
+		return GPLR & GPIO_GPIO(gpio);
+	else
+		return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
+		if (value)
+			GPSR = GPIO_GPIO(gpio);
+		else
+			GPCR = GPIO_GPIO(gpio);
+	else
+		__gpio_set_value(gpio, value);
+}
+
+#define gpio_cansleep	__gpio_cansleep
+
+static inline unsigned gpio_to_irq(unsigned gpio)
+{
+	if (gpio < 11)
+		return IRQ_GPIO0 + gpio;
+	else
+		return IRQ_GPIO11 - 11 + gpio;
+}
+
+static inline unsigned irq_to_gpio(unsigned irq)
+{
+	if (irq < IRQ_GPIO11_27)
+		return irq - IRQ_GPIO0;
+	else
+		return irq - IRQ_GPIO11 + 11;
+}
+
+#endif
diff --git a/include/asm-arm/arch-sa1100/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
similarity index 100%
rename from include/asm-arm/arch-sa1100/h3600.h
rename to arch/arm/mach-sa1100/include/mach/h3600.h
diff --git a/include/asm-arm/arch-sa1100/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
similarity index 100%
rename from include/asm-arm/arch-sa1100/h3600_gpio.h
rename to arch/arm/mach-sa1100/include/mach/h3600_gpio.h
diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h
new file mode 100644
index 0000000..5976435
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/hardware.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/hardware.h
+ *
+ * Copyright (C) 1998 Nicolas Pitre <nico@cam.org>
+ *
+ * This file contains the hardware definitions for SA1100 architecture
+ *
+ * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
+ *      Definitions for SA1111 added.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+
+#define UNCACHEABLE_ADDR	0xfa050000
+
+
+/*
+ * SA1100 internal I/O mappings
+ *
+ * We have the following mapping:
+ *      phys            virt
+ *      80000000        f8000000
+ *      90000000        fa000000
+ *      a0000000        fc000000
+ *      b0000000        fe000000
+ */
+
+#define VIO_BASE        0xf8000000	/* virtual start of IO space */
+#define VIO_SHIFT       3		/* x = IO space shrink power */
+#define PIO_START       0x80000000	/* physical start of IO space */
+
+#define io_p2v( x )             \
+   ( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE )
+#define io_v2p( x )             \
+   ( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))<<VIO_SHIFT)) + PIO_START )
+
+#ifndef __ASSEMBLY__
+
+# define __REG(x)	(*((volatile unsigned long *)io_p2v(x)))
+# define __PREG(x)	(io_v2p((unsigned long)&(x)))
+
+#else
+
+# define __REG(x)	io_p2v(x)
+# define __PREG(x)	io_v2p(x)
+
+#endif
+
+#include "SA-1100.h"
+
+#ifdef CONFIG_SA1101
+#include "SA-1101.h"
+#endif
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-sa1100/include/mach/ide.h b/arch/arm/mach-sa1100/include/mach/ide.h
new file mode 100644
index 0000000..4c99c8f5
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/ide.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/ide.h
+ *
+ * Copyright (c) 1998 Hugo Fiennes & Nicolas Pitre
+ *
+ * 18-aug-2000: Cleanup by Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
+ *              Get rid of the special ide_init_hwif_ports() functions
+ *              and make a generalised function that can be used by all
+ *              architectures.
+ */
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#error "This code is broken and needs update to match with current ide support"
+
+
+/*
+ * Set up a hw structure for a specified data port, control port and IRQ.
+ * This should follow whatever the default interface uses.
+ */
+static inline void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
+				       unsigned long ctrl_port, int *irq)
+{
+	unsigned long reg = data_port;
+	int i;
+	int regincr = 1;
+
+	/* The Empeg board has the first two address lines unused */
+	if (machine_is_empeg())
+		regincr = 1 << 2;
+
+	/* The LART doesn't use A0 for IDE */
+	if (machine_is_lart())
+		regincr = 1 << 1;
+
+	memset(hw, 0, sizeof(*hw));
+
+	for (i = 0; i <= 7; i++) {
+		hw->io_ports_array[i] = reg;
+		reg += regincr;
+	}
+
+	hw->io_ports.ctl_addr = ctrl_port;
+
+	if (irq)
+		*irq = 0;
+}
+
+/*
+ * This registers the standard ports for this architecture with the IDE
+ * driver.
+ */
+static __inline__ void
+ide_init_default_hwifs(void)
+{
+    if (machine_is_lart()) {
+#ifdef CONFIG_SA1100_LART
+        hw_regs_t hw;
+
+        /* Enable GPIO as interrupt line */
+        GPDR &= ~LART_GPIO_IDE;
+	set_irq_type(LART_IRQ_IDE, IRQ_TYPE_EDGE_RISING);
+
+        /* set PCMCIA interface timing */
+        MECR = 0x00060006;
+
+        /* init the interface */
+	ide_init_hwif_ports(&hw, PCMCIA_IO_0_BASE + 0x0000, PCMCIA_IO_0_BASE + 0x1000, NULL);
+        hw.irq = LART_IRQ_IDE;
+        ide_register_hw(&hw);
+#endif
+    }
+}
diff --git a/arch/arm/mach-sa1100/include/mach/io.h b/arch/arm/mach-sa1100/include/mach/io.h
new file mode 100644
index 0000000..0c070a6
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/io.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/io.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ *  06-12-1997	RMK	Created.
+ *  07-04-1999	RMK	Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many 
+ * drivers out there that might just work if we fake them...
+ */
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
new file mode 100644
index 0000000..0cb3660
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -0,0 +1,197 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/irqs.h
+ *
+ * Copyright (C) 1996 Russell King
+ * Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus).
+ * Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation)
+ *
+ * 2001/11/14	RMK	Cleaned up and standardised a lot of the IRQs.
+ */
+
+#define	IRQ_GPIO0		0
+#define	IRQ_GPIO1		1
+#define	IRQ_GPIO2		2
+#define	IRQ_GPIO3		3
+#define	IRQ_GPIO4		4
+#define	IRQ_GPIO5		5
+#define	IRQ_GPIO6		6
+#define	IRQ_GPIO7		7
+#define	IRQ_GPIO8		8
+#define	IRQ_GPIO9		9
+#define	IRQ_GPIO10		10
+#define	IRQ_GPIO11_27		11
+#define	IRQ_LCD  		12	/* LCD controller           */
+#define	IRQ_Ser0UDC		13	/* Ser. port 0 UDC          */
+#define	IRQ_Ser1SDLC		14	/* Ser. port 1 SDLC         */
+#define	IRQ_Ser1UART		15	/* Ser. port 1 UART         */
+#define	IRQ_Ser2ICP		16	/* Ser. port 2 ICP          */
+#define	IRQ_Ser3UART		17	/* Ser. port 3 UART         */
+#define	IRQ_Ser4MCP		18	/* Ser. port 4 MCP          */
+#define	IRQ_Ser4SSP		19	/* Ser. port 4 SSP          */
+#define	IRQ_DMA0 		20	/* DMA controller channel 0 */
+#define	IRQ_DMA1 		21	/* DMA controller channel 1 */
+#define	IRQ_DMA2 		22	/* DMA controller channel 2 */
+#define	IRQ_DMA3 		23	/* DMA controller channel 3 */
+#define	IRQ_DMA4 		24	/* DMA controller channel 4 */
+#define	IRQ_DMA5 		25	/* DMA controller channel 5 */
+#define	IRQ_OST0 		26	/* OS Timer match 0         */
+#define	IRQ_OST1 		27	/* OS Timer match 1         */
+#define	IRQ_OST2 		28	/* OS Timer match 2         */
+#define	IRQ_OST3 		29	/* OS Timer match 3         */
+#define	IRQ_RTC1Hz		30	/* RTC 1 Hz clock           */
+#define	IRQ_RTCAlrm		31	/* RTC Alarm                */
+
+#define	IRQ_GPIO11		32
+#define	IRQ_GPIO12		33
+#define	IRQ_GPIO13		34
+#define	IRQ_GPIO14		35
+#define	IRQ_GPIO15		36
+#define	IRQ_GPIO16		37
+#define	IRQ_GPIO17		38
+#define	IRQ_GPIO18		39
+#define	IRQ_GPIO19		40
+#define	IRQ_GPIO20		41
+#define	IRQ_GPIO21		42
+#define	IRQ_GPIO22		43
+#define	IRQ_GPIO23		44
+#define	IRQ_GPIO24		45
+#define	IRQ_GPIO25		46
+#define	IRQ_GPIO26		47
+#define	IRQ_GPIO27		48
+
+/*
+ * The next 16 interrupts are for board specific purposes.  Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these.  If you need more, increase IRQ_BOARD_END, but keep it
+ * within sensible limits.  IRQs 49 to 64 are available.
+ */
+#define IRQ_BOARD_START		49
+#define IRQ_BOARD_END		65
+
+#define IRQ_SA1111_START	(IRQ_BOARD_END)
+#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
+#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
+#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
+#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
+#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
+#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
+#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
+#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
+#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
+#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
+#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
+#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
+#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
+#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
+#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
+#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
+#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
+#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
+#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
+#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
+#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
+#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
+#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
+#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
+#define SSPXMTINT		(IRQ_BOARD_END + 24)
+#define SSPRCVINT		(IRQ_BOARD_END + 25)
+#define SSPROR			(IRQ_BOARD_END + 26)
+#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
+#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
+#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
+#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
+#define AUDTFSR			(IRQ_BOARD_END + 36)
+#define AUDRFSR			(IRQ_BOARD_END + 37)
+#define AUDTUR			(IRQ_BOARD_END + 38)
+#define AUDROR			(IRQ_BOARD_END + 39)
+#define AUDDTS			(IRQ_BOARD_END + 40)
+#define AUDRDD			(IRQ_BOARD_END + 41)
+#define AUDSTO			(IRQ_BOARD_END + 42)
+#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
+#define IRQ_HCIM		(IRQ_BOARD_END + 44)
+#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
+#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
+#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
+#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
+#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
+#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
+#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
+#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
+#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
+#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
+
+#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
+#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
+#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
+#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
+#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
+#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
+#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
+#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
+#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
+#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
+#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
+#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
+#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
+#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
+#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
+#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
+#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
+#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
+#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
+#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
+#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
+#define IRQ_LOCOMO_SPI_REND	(IRQ_BOARD_END + 20)
+#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
+
+/*
+ * Figure out the MAX IRQ number.
+ *
+ * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
+ * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
+ * Otherwise, we have the standard IRQs only.
+ */
+#ifdef CONFIG_SA1111
+#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
+#elif defined(CONFIG_SA1100_H3800)
+#define NR_IRQS			(IRQ_BOARD_END)
+#elif defined(CONFIG_SHARP_LOCOMO)
+#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
+#else
+#define NR_IRQS			(IRQ_BOARD_START)
+#endif
+
+/*
+ * Board specific IRQs.  Define them here.
+ * Do not surround them with ifdefs.
+ */
+#define IRQ_NEPONSET_SMC9196	(IRQ_BOARD_START + 0)
+#define IRQ_NEPONSET_USAR	(IRQ_BOARD_START + 1)
+#define IRQ_NEPONSET_SA1111	(IRQ_BOARD_START + 2)
+
+/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
+#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
+#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
+#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
+#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
+
+/* H3800-specific IRQs (CONFIG_SA1100_H3800) */
+#define H3800_KPIO_IRQ_START    (IRQ_BOARD_START)
+#define IRQ_H3800_KEY           (IRQ_BOARD_START + 0)
+#define IRQ_H3800_SPI           (IRQ_BOARD_START + 1)
+#define IRQ_H3800_OWM           (IRQ_BOARD_START + 2)
+#define IRQ_H3800_ADC           (IRQ_BOARD_START + 3)
+#define IRQ_H3800_UART_0        (IRQ_BOARD_START + 4)
+#define IRQ_H3800_UART_1        (IRQ_BOARD_START + 5)
+#define IRQ_H3800_TIMER_0       (IRQ_BOARD_START + 6)
+#define IRQ_H3800_TIMER_1       (IRQ_BOARD_START + 7)
+#define IRQ_H3800_TIMER_2       (IRQ_BOARD_START + 8)
+#define H3800_KPIO_IRQ_COUNT    9
+
+#define H3800_GPIO_IRQ_START    (IRQ_BOARD_START + 9)
+#define IRQ_H3800_PEN           (IRQ_BOARD_START + 9)
+#define IRQ_H3800_SD_DETECT     (IRQ_BOARD_START + 10)
+#define IRQ_H3800_EAR_IN        (IRQ_BOARD_START + 11)
+#define IRQ_H3800_USB_DETECT    (IRQ_BOARD_START + 12)
+#define IRQ_H3800_SD_CON_SLT    (IRQ_BOARD_START + 13)
+#define H3800_GPIO_IRQ_COUNT    5
diff --git a/arch/arm/mach-sa1100/include/mach/jornada720.h b/arch/arm/mach-sa1100/include/mach/jornada720.h
new file mode 100644
index 0000000..bc12085
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/jornada720.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/jornada720.h
+ *
+ * This file contains SSP/MCU communication definitions for HP Jornada 710/720/728
+ *
+ * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
+ *  Copyright (C) 2000 John Ankcorn <jca@lcs.mit.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+ /* HP Jornada 7xx microprocessor commands */
+#define GETBATTERYDATA		0xc0
+#define GETSCANKEYCODE		0x90
+#define GETTOUCHSAMPLES		0xa0
+#define GETCONTRAST		0xD0
+#define SETCONTRAST		0xD1
+#define GETBRIGHTNESS		0xD2
+#define SETBRIGHTNESS		0xD3
+#define CONTRASTOFF		0xD8
+#define BRIGHTNESSOFF		0xD9
+#define PWMOFF			0xDF
+#define TXDUMMY			0x11
+#define ERRORCODE		0x00
diff --git a/include/asm-arm/arch-sa1100/lart.h b/arch/arm/mach-sa1100/include/mach/lart.h
similarity index 100%
rename from include/asm-arm/arch-sa1100/lart.h
rename to arch/arm/mach-sa1100/include/mach/lart.h
diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
new file mode 100644
index 0000000..fb8b09a
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/mcp.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-sa1100/include/mach/mcp.h
+ *
+ *  Copyright (C) 2005 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_ARCH_MCP_H
+#define __ASM_ARM_ARCH_MCP_H
+
+#include <linux/types.h>
+
+struct mcp_plat_data {
+	u32 mccr0;
+	u32 mccr1;
+	unsigned int sclk_rate;
+};
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
new file mode 100644
index 0000000..29f639e
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/memory.h
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/memory.h
+ *
+ * Copyright (C) 1999-2000 Nicolas Pitre <nico@cam.org>
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical DRAM offset is 0xc0000000 on the SA1100
+ */
+#define PHYS_OFFSET	UL(0xc0000000)
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_SA1111
+void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes);
+
+#define arch_adjust_zones(node, size, holes) \
+	sa1111_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_1M - 1)
+
+#endif
+#endif
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ *
+ * On the SA1100, bus addresses are equivalent to physical addresses.
+ */
+#define __virt_to_bus(x)	 __virt_to_phys(x)
+#define __bus_to_virt(x)	 __phys_to_virt(x)
+
+/*
+ * Because of the wide memory address space between physical RAM banks on the 
+ * SA1100, it's much convenient to use Linux's NUMA support to implement our 
+ * memory map representation.  Assuming all memory nodes have equal access 
+ * characteristics, we then have generic discontiguous memory support.
+ *
+ * Of course, all this isn't mandatory for SA1100 implementations with only
+ * one used memory bank.  For those, simply undefine CONFIG_DISCONTIGMEM.
+ *
+ * The nodes are matched with the physical memory bank addresses which are 
+ * incidentally the same as virtual addresses.
+ * 
+ * 	node 0:  0xc0000000 - 0xc7ffffff
+ * 	node 1:  0xc8000000 - 0xcfffffff
+ * 	node 2:  0xd0000000 - 0xd7ffffff
+ * 	node 3:  0xd8000000 - 0xdfffffff
+ */
+#define NODE_MEM_SIZE_BITS	27
+
+/*
+ * Cache flushing area - SA1100 zero bank
+ */
+#define FLUSH_BASE_PHYS		0xe0000000
+#define FLUSH_BASE		0xf5000000
+#define FLUSH_BASE_MINICACHE	0xf5100000
+
+#endif
diff --git a/include/asm-arm/arch-sa1100/mtd-xip.h b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
similarity index 100%
rename from include/asm-arm/arch-sa1100/mtd-xip.h
rename to arch/arm/mach-sa1100/include/mach/mtd-xip.h
diff --git a/arch/arm/mach-sa1100/include/mach/neponset.h b/arch/arm/mach-sa1100/include/mach/neponset.h
new file mode 100644
index 0000000..d3f044f
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/neponset.h
@@ -0,0 +1,74 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/neponset.h
+ *
+ * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
+ *
+ * This file contains the hardware specific definitions for Assabet
+ * Only include this file from SA1100-specific files.
+ *
+ * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
+ *      Definitions for Neponset added.
+ */
+#ifndef __ASM_ARCH_NEPONSET_H
+#define __ASM_ARCH_NEPONSET_H
+
+/*
+ * Neponset definitions: 
+ */
+
+#define NEPONSET_CPLD_BASE      (0x10000000)
+#define Nep_p2v( x )            ((x) - NEPONSET_CPLD_BASE + 0xf3000000)
+#define Nep_v2p( x )            ((x) - 0xf3000000 + NEPONSET_CPLD_BASE)
+
+#define _IRR                    0x10000024      /* Interrupt Reason Register */
+#define _AUD_CTL                0x100000c0      /* Audio controls (RW)       */
+#define _MDM_CTL_0              0x100000b0      /* Modem control 0 (RW)      */
+#define _MDM_CTL_1              0x100000b4      /* Modem control 1 (RW)      */
+#define _NCR_0	                0x100000a0      /* Control Register (RW)     */
+#define _KP_X_OUT               0x10000090      /* Keypad row write (RW)     */
+#define _KP_Y_IN                0x10000080      /* Keypad column read (RO)   */
+#define _SWPK                   0x10000020      /* Switch pack (RO)          */
+#define _WHOAMI                 0x10000000      /* System ID Register (RO)   */
+
+#define _LEDS                   0x10000010      /* LEDs [31:0] (WO)          */
+
+#define IRR                     (*((volatile u_char *) Nep_p2v(_IRR)))
+#define AUD_CTL                 (*((volatile u_char *) Nep_p2v(_AUD_CTL)))
+#define MDM_CTL_0               (*((volatile u_char *) Nep_p2v(_MDM_CTL_0)))
+#define MDM_CTL_1               (*((volatile u_char *) Nep_p2v(_MDM_CTL_1)))
+#define NCR_0			(*((volatile u_char *) Nep_p2v(_NCR_0)))
+#define KP_X_OUT                (*((volatile u_char *) Nep_p2v(_KP_X_OUT)))
+#define KP_Y_IN                 (*((volatile u_char *) Nep_p2v(_KP_Y_IN)))
+#define SWPK                    (*((volatile u_char *) Nep_p2v(_SWPK)))
+#define WHOAMI                  (*((volatile u_char *) Nep_p2v(_WHOAMI)))
+
+#define LEDS                    (*((volatile Word   *) Nep_p2v(_LEDS)))
+
+#define IRR_ETHERNET		(1<<0)
+#define IRR_USAR		(1<<1)
+#define IRR_SA1111		(1<<2)
+
+#define AUD_SEL_1341            (1<<0)
+#define AUD_MUTE_1341           (1<<1)
+
+#define MDM_CTL0_RTS1		(1 << 0)
+#define MDM_CTL0_DTR1		(1 << 1)
+#define MDM_CTL0_RTS2		(1 << 2)
+#define MDM_CTL0_DTR2		(1 << 3)
+
+#define MDM_CTL1_CTS1		(1 << 0)
+#define MDM_CTL1_DSR1		(1 << 1)
+#define MDM_CTL1_DCD1		(1 << 2)
+#define MDM_CTL1_CTS2		(1 << 3)
+#define MDM_CTL1_DSR2		(1 << 4)
+#define MDM_CTL1_DCD2		(1 << 5)
+
+#define NCR_GP01_OFF		(1<<0)
+#define NCR_TP_PWR_EN		(1<<1)
+#define NCR_MS_PWR_EN		(1<<2)
+#define NCR_ENET_OSC_EN		(1<<3)
+#define NCR_SPI_KB_WK_UP	(1<<4)
+#define NCR_A0VPP		(1<<5)
+#define NCR_A1VPP		(1<<6)
+
+#endif
diff --git a/include/asm-arm/arch-sa1100/shannon.h b/arch/arm/mach-sa1100/include/mach/shannon.h
similarity index 100%
rename from include/asm-arm/arch-sa1100/shannon.h
rename to arch/arm/mach-sa1100/include/mach/shannon.h
diff --git a/arch/arm/mach-sa1100/include/mach/simpad.h b/arch/arm/mach-sa1100/include/mach/simpad.h
new file mode 100644
index 0000000..9296c451
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/simpad.h
@@ -0,0 +1,112 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/simpad.h
+ *
+ * based of assabet.h same as HUW_Webpanel
+ *
+ * This file contains the hardware specific definitions for SIMpad
+ *
+ * 2001/05/14 Juergen Messerer <juergen.messerer@freesurf.ch>
+ */
+
+#ifndef __ASM_ARCH_SIMPAD_H
+#define __ASM_ARCH_SIMPAD_H
+
+
+#define GPIO_UART1_RTS	GPIO_GPIO14
+#define GPIO_UART1_DTR	GPIO_GPIO7
+#define GPIO_UART1_CTS	GPIO_GPIO8
+#define GPIO_UART1_DCD	GPIO_GPIO23
+#define GPIO_UART1_DSR	GPIO_GPIO6
+
+#define GPIO_UART3_RTS	GPIO_GPIO12
+#define GPIO_UART3_DTR	GPIO_GPIO16
+#define GPIO_UART3_CTS	GPIO_GPIO13
+#define GPIO_UART3_DCD	GPIO_GPIO18
+#define GPIO_UART3_DSR	GPIO_GPIO17
+
+#define GPIO_POWER_BUTTON	GPIO_GPIO0
+#define GPIO_UCB1300_IRQ	GPIO_GPIO22	/* UCB GPIO and touchscreen */
+
+#define IRQ_UART1_CTS	IRQ_GPIO15
+#define IRQ_UART1_DCD	GPIO_GPIO23
+#define IRQ_UART1_DSR	GPIO_GPIO6
+#define IRQ_UART3_CTS	GPIO_GPIO13
+#define IRQ_UART3_DCD	GPIO_GPIO18
+#define IRQ_UART3_DSR	GPIO_GPIO17
+
+#define IRQ_GPIO_UCB1300_IRQ IRQ_GPIO22
+#define IRQ_GPIO_POWER_BUTTON IRQ_GPIO0
+
+
+/*---  PCMCIA  ---*/
+#define GPIO_CF_CD              GPIO_GPIO24
+#define GPIO_CF_IRQ             GPIO_GPIO1
+#define IRQ_GPIO_CF_IRQ         IRQ_GPIO1
+#define IRQ_GPIO_CF_CD          IRQ_GPIO24
+
+/*--- SmartCard ---*/
+#define GPIO_SMART_CARD		GPIO_GPIO10
+#define IRQ_GPIO_SMARD_CARD	IRQ_GPIO10
+
+// CS3 Latch is write only, a shadow is necessary
+
+#define CS3BUSTYPE unsigned volatile long
+#define CS3_BASE        0xf1000000
+
+#define VCC_5V_EN       0x0001 // For 5V PCMCIA
+#define VCC_3V_EN       0x0002 // FOR 3.3V PCMCIA
+#define EN1             0x0004 // This is only for EPROM's
+#define EN0             0x0008 // Both should be enable for 3.3V or 5V
+#define DISPLAY_ON      0x0010
+#define PCMCIA_BUFF_DIS 0x0020
+#define MQ_RESET        0x0040
+#define PCMCIA_RESET    0x0080
+#define DECT_POWER_ON   0x0100
+#define IRDA_SD         0x0200 // Shutdown for powersave
+#define RS232_ON        0x0400
+#define SD_MEDIAQ       0x0800 // Shutdown for powersave
+#define LED2_ON         0x1000
+#define IRDA_MODE       0x2000 // Fast/Slow IrDA mode
+#define ENABLE_5V       0x4000 // Enable 5V circuit
+#define RESET_SIMCARD   0x8000
+
+#define RS232_ENABLE    0x0440
+#define PCMCIAMASK      0x402f
+
+
+struct simpad_battery {
+	unsigned char ac_status;	/* line connected yes/no */
+	unsigned char status;		/* battery loading yes/no */
+	unsigned char percentage;	/* percentage loaded */
+	unsigned short life;		/* life till empty */
+};
+
+/* These should match the apm_bios.h definitions */
+#define SIMPAD_AC_STATUS_AC_OFFLINE      0x00
+#define SIMPAD_AC_STATUS_AC_ONLINE       0x01
+#define SIMPAD_AC_STATUS_AC_BACKUP       0x02   /* What does this mean? */
+#define SIMPAD_AC_STATUS_AC_UNKNOWN      0xff
+
+/* These bitfields are rarely "or'd" together */
+#define SIMPAD_BATT_STATUS_HIGH          0x01
+#define SIMPAD_BATT_STATUS_LOW           0x02
+#define SIMPAD_BATT_STATUS_CRITICAL      0x04
+#define SIMPAD_BATT_STATUS_CHARGING      0x08
+#define SIMPAD_BATT_STATUS_CHARGE_MAIN   0x10
+#define SIMPAD_BATT_STATUS_DEAD          0x20   /* Battery will not charge */
+#define SIMPAD_BATT_NOT_INSTALLED        0x20   /* For expansion pack batteries */
+#define SIMPAD_BATT_STATUS_FULL          0x40   /* Battery fully charged (and connected to AC) */
+#define SIMPAD_BATT_STATUS_NOBATT        0x80
+#define SIMPAD_BATT_STATUS_UNKNOWN       0xff
+
+extern int simpad_get_battery(struct simpad_battery* );
+
+#endif // __ASM_ARCH_SIMPAD_H
+
+
+
+
+
+
+
+
diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
new file mode 100644
index 0000000..63755ca
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/system.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/system.h
+ *
+ * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
+ */
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	if (mode == 's') {
+		/* Jump into ROM at address 0 */
+		cpu_reset(0);
+	} else {
+		/* Use on-chip reset capability */
+		RSRR = RSRR_SWR;
+	}
+}
diff --git a/arch/arm/mach-sa1100/include/mach/timex.h b/arch/arm/mach-sa1100/include/mach/timex.h
new file mode 100644
index 0000000..7a5d017
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/timex.h
@@ -0,0 +1,12 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/timex.h
+ *
+ * SA1100 architecture timex specifications
+ *
+ * Copyright (C) 1998 
+ */
+
+/*
+ * SA1100 timer
+ */
+#define CLOCK_TICK_RATE		3686400
diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h
new file mode 100644
index 0000000..714160b
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/uncompress.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/uncompress.h
+ *
+ * (C) 1999 Nicolas Pitre <nico@cam.org>
+ *
+ * Reorganised to be machine independent.
+ */
+
+#include "hardware.h"
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  We search for the first enabled
+ * port in the most probable order.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ */
+
+#define UART(x)		(*(volatile unsigned long *)(serial_port + (x)))
+
+static void putc(int c)
+{
+	unsigned long serial_port;
+
+	do {
+		serial_port = _Ser3UTCR0;
+		if (UART(UTCR3) & UTCR3_TXE) break;
+		serial_port = _Ser1UTCR0;
+		if (UART(UTCR3) & UTCR3_TXE) break;
+		serial_port = _Ser2UTCR0;
+		if (UART(UTCR3) & UTCR3_TXE) break;
+		return;
+	} while (0);
+
+	/* wait for space in the UART's transmitter */
+	while (!(UART(UTSR1) & UTSR1_TNF))
+		barrier();
+
+	/* send the character out. */
+	UART(UTDR) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * Nothing to do for these
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-sa1100/include/mach/vmalloc.h b/arch/arm/mach-sa1100/include/mach/vmalloc.h
new file mode 100644
index 0000000..ec8fdc5
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/vmalloc.h
+ */
+#define VMALLOC_END       (0xe8000000)
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index 280e111..86369a8 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -16,7 +16,7 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 2fefd19..81848aa9 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -23,7 +23,7 @@
 #include <linux/mtd/partitions.h>
 #include <video/s1d13xxxfb.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index e319c36..06ea7ab 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -20,9 +20,9 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/ssp.h>
-#include <asm/arch/jornada720.h>
+#include <mach/jornada720.h>
 
 static DEFINE_SPINLOCK(jornada_ssp_lock);
 static unsigned long jornada_ssp_flags;
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 7b99121..0cd5269 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -6,14 +6,14 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/mcp.h>
+#include <mach/mcp.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/leds-assabet.c b/arch/arm/mach-sa1100/leds-assabet.c
index 0af944e..64e9b4b 100644
--- a/arch/arm/mach-sa1100/leds-assabet.c
+++ b/arch/arm/mach-sa1100/leds-assabet.c
@@ -11,10 +11,10 @@
  */
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
-#include <asm/arch/assabet.h>
+#include <mach/assabet.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-sa1100/leds-badge4.c b/arch/arm/mach-sa1100/leds-badge4.c
index 9aead5f..cf1e384 100644
--- a/arch/arm/mach-sa1100/leds-badge4.c
+++ b/arch/arm/mach-sa1100/leds-badge4.c
@@ -12,7 +12,7 @@
 
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-sa1100/leds-cerf.c b/arch/arm/mach-sa1100/leds-cerf.c
index 0c61ce5..259b48e 100644
--- a/arch/arm/mach-sa1100/leds-cerf.c
+++ b/arch/arm/mach-sa1100/leds-cerf.c
@@ -5,7 +5,7 @@
  */
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c
index afa82f40..2bce137 100644
--- a/arch/arm/mach-sa1100/leds-hackkit.c
+++ b/arch/arm/mach-sa1100/leds-hackkit.c
@@ -11,7 +11,7 @@
  */
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-sa1100/leds-lart.c b/arch/arm/mach-sa1100/leds-lart.c
index 066c7dc..0505a1f 100644
--- a/arch/arm/mach-sa1100/leds-lart.c
+++ b/arch/arm/mach-sa1100/leds-lart.c
@@ -11,7 +11,7 @@
  */
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-sa1100/leds-simpad.c b/arch/arm/mach-sa1100/leds-simpad.c
index 1a3564b..d50f4ee 100644
--- a/arch/arm/mach-sa1100/leds-simpad.c
+++ b/arch/arm/mach-sa1100/leds-simpad.c
@@ -5,10 +5,10 @@
  */
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
-#include <asm/arch/simpad.h>
+#include <mach/simpad.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index dd7949f..4856a6b 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -10,14 +10,14 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/neponset.h>
+#include <mach/assabet.h>
+#include <mach/neponset.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/sizes.h>
 
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 84e956e..83be1c6 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -11,7 +11,7 @@
 
 #include <linux/mtd/partitions.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -20,7 +20,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 41ac210..111cce6 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -27,7 +27,7 @@
 #include <linux/errno.h>
 #include <linux/time.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/memory.h>
 #include <asm/system.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 60b4d84..9ccdd09 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -9,7 +9,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 
@@ -17,8 +17,8 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/mcp.h>
-#include <asm/arch/shannon.h>
+#include <mach/mcp.h>
+#include <mach/shannon.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index cc1df07..8dd6353 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -14,7 +14,7 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 
 #include <asm/mach-types.h>
@@ -22,8 +22,8 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/mcp.h>
-#include <asm/arch/simpad.h>
+#include <mach/mcp.h>
+#include <mach/simpad.h>
 
 #include <linux/serial_core.h>
 #include <linux/ioport.h>
diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S
index 29bdd3d..171441f 100644
--- a/arch/arm/mach-sa1100/sleep.S
+++ b/arch/arm/mach-sa1100/sleep.S
@@ -18,7 +18,7 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 
 
diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c
index db49165..641f361 100644
--- a/arch/arm/mach-sa1100/ssp.c
+++ b/arch/arm/mach-sa1100/ssp.c
@@ -20,7 +20,7 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/ssp.h>
 
 #define TIMEOUT 100000
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 428c212..24c0a4b 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -16,7 +16,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/mach/time.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #define MIN_OSCR_DELTA 2
 
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
new file mode 100644
index 0000000..0836cb78
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -0,0 +1,31 @@
+/* arch/arm/mach-shark/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mov	\rx, #0xe0000000
+		orr	\rx, \rx, #0x000003f8
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx]
+		.endm
+
+		.macro	busyuart,rd,rx
+		mov	\rd, #0
+1001:		add	\rd, \rd, #1
+		teq	\rd, #0x10000
+		bne	1001b
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
diff --git a/arch/arm/mach-shark/include/mach/dma.h b/arch/arm/mach-shark/include/mach/dma.h
new file mode 100644
index 0000000..c0a29bd
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/dma.h
@@ -0,0 +1,18 @@
+/*
+ * arch/arm/mach-shark/include/mach/dma.h
+ *
+ * by Alexander Schulz
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* Use only the lowest 4MB, nothing else works.
+ * The rest is not DMAable. See dev /  .properties
+ * in OpenFirmware.
+ */
+#define MAX_DMA_ADDRESS		0xC0400000
+#define MAX_DMA_CHANNELS	8
+#define DMA_ISA_CASCADE         4
+
+#endif /* _ASM_ARCH_DMA_H */
+
diff --git a/arch/arm/mach-shark/include/mach/entry-macro.S b/arch/arm/mach-shark/include/mach/entry-macro.S
new file mode 100644
index 0000000..e2853c0
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/entry-macro.S
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-shark/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Shark platform
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	r4, #0xe0000000
+
+		mov	\irqstat, #0x0C
+		strb	\irqstat, [r4, #0x20]		@outb(0x0C, 0x20) /* Poll command */
+		ldrb	\irqnr, [r4, #0x20]		@irq = inb(0x20) & 7
+		and	\irqstat, \irqnr, #0x80
+		teq	\irqstat, #0
+		beq	43f
+		and	\irqnr, \irqnr, #7
+		teq	\irqnr, #2
+		bne	44f
+43:		mov	\irqstat, #0x0C
+		strb	\irqstat, [r4, #0xa0]		@outb(0x0C, 0xA0) /* Poll command */
+		ldrb	\irqnr, [r4, #0xa0]		@irq = (inb(0xA0) & 7) + 8
+		and	\irqstat, \irqnr, #0x80
+		teq	\irqstat, #0
+		beq	44f
+		and	\irqnr, \irqnr, #7
+		add	\irqnr, \irqnr, #8
+44:		teq	\irqstat, #0
+		.endm
+
diff --git a/arch/arm/mach-shark/include/mach/hardware.h b/arch/arm/mach-shark/include/mach/hardware.h
new file mode 100644
index 0000000..cb0ee29
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/hardware.h
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/mach-shark/include/mach/hardware.h
+ *
+ * by Alexander Schulz
+ *
+ * derived from:
+ * arch/arm/mach-ebsa110/include/mach/hardware.h
+ * Copyright (C) 1996-1999 Russell King.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Mapping areas
+ */
+#define IO_BASE			0xe0000000
+
+#else
+
+#define IO_BASE			0
+
+#endif
+
+#define IO_SIZE			0x08000000
+#define IO_START		0x40000000
+#define ROMCARD_SIZE		0x08000000
+#define ROMCARD_START		0x10000000
+
+#define PCIO_BASE		0xe0000000
+
+
+/* defines for the Framebuffer */
+#define FB_START		0x06000000
+#define FB_SIZE			0x01000000
+
+#define UNCACHEABLE_ADDR        0xdf010000
+
+#define SEQUOIA_LED_GREEN       (1<<6)
+#define SEQUOIA_LED_AMBER       (1<<5)
+#define SEQUOIA_LED_BACK        (1<<7)
+
+#define pcibios_assign_all_busses()     1
+
+#define PCIBIOS_MIN_IO          0x6000
+#define PCIBIOS_MIN_MEM         0x50000000
+#define PCIMEM_BASE		0xe8000000
+
+#endif
+
diff --git a/arch/arm/mach-shark/include/mach/io.h b/arch/arm/mach-shark/include/mach/io.h
new file mode 100644
index 0000000..9247592
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/io.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/mach-shark/include/mach/io.h
+ *
+ * by Alexander Schulz
+ *
+ * derived from:
+ * arch/arm/mach-ebsa110/include/mach/io.h
+ * Copyright (C) 1997,1998 Russell King
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses.  PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
+ * and are translated to the start of IO.
+ */
+#define __PORT_PCIO(x)	(!((x) & 0x80000000))
+
+#define __io(a)                 ((void __iomem *)(PCIO_BASE + (a)))
+
+
+static inline unsigned int __ioaddr (unsigned int port)			\
+{										\
+	if (__PORT_PCIO(port))							\
+		return (unsigned int)(PCIO_BASE + (port));			\
+	else									\
+		return (unsigned int)(IO_BASE + (port));			\
+}
+
+#define __mem_pci(addr) (addr)
+
+/*
+ * Translated address IO functions
+ *
+ * IO address has already been translated to a virtual address
+ */
+#define outb_t(v,p)								\
+	(*(volatile unsigned char *)(p) = (v))
+
+#define inb_t(p)								\
+	(*(volatile unsigned char *)(p))
+
+#define outl_t(v,p)								\
+	(*(volatile unsigned long *)(p) = (v))
+
+#define inl_t(p)								\
+	(*(volatile unsigned long *)(p))
+
+#endif
diff --git a/arch/arm/mach-shark/include/mach/irqs.h b/arch/arm/mach-shark/include/mach/irqs.h
new file mode 100644
index 0000000..0586acd7
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/irqs.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-shark/include/mach/irqs.h
+ *
+ * by Alexander Schulz
+ */
+
+#define NR_IRQS			16
+
+#define IRQ_ISA_KEYBOARD	 1
+#define RTC_IRQ			 8
+#define I8042_KBD_IRQ		 1
+#define I8042_AUX_IRQ		12
+#define IRQ_HARDDISK            14
diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h
new file mode 100644
index 0000000..b7874ad
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/memory.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-shark/include/mach/memory.h
+ *
+ * by Alexander Schulz
+ *
+ * derived from:
+ * arch/arm/mach-ebsa110/include/mach/memory.h
+ * Copyright (c) 1996-1999 Russell King.
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET     UL(0x08000000)
+
+#ifndef __ASSEMBLY__
+
+static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsigned long *zhole_size) 
+{
+  if (node != 0) return;
+  /* Only the first 4 MB (=1024 Pages) are usable for DMA */
+  zone_size[1] = zone_size[0] - 1024;
+  zone_size[0] = 1024;
+  zhole_size[1] = zhole_size[0];
+  zhole_size[0] = 0;
+}
+
+#define arch_adjust_zones(node, size, holes) \
+	__arch_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_4M - 1)
+
+#endif
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+/*
+ * Cache flushing area
+ */
+#define FLUSH_BASE_PHYS		0x80000000
+#define FLUSH_BASE		0xdf000000
+
+#endif
diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h
new file mode 100644
index 0000000..85aceef6
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/system.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-shark/include/mach/system.h
+ *
+ * by Alexander Schulz
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+
+static void arch_reset(char mode)
+{
+	short temp;
+	local_irq_disable();
+	/* Reset the Machine via pc[3] of the sequoia chipset */
+	outw(0x09,0x24);
+	temp=inw(0x26);
+	temp = temp | (1<<3) | (1<<10);
+	outw(0x09,0x24);
+	outw(temp,0x26);
+
+}
+
+static inline void arch_idle(void)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-shark/include/mach/timex.h b/arch/arm/mach-shark/include/mach/timex.h
new file mode 100644
index 0000000..bb6eeae
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/timex.h
@@ -0,0 +1,7 @@
+/*
+ * arch/arm/mach-shark/include/mach/timex.h
+ *
+ * by Alexander Schulz
+ */
+
+#define CLOCK_TICK_RATE 1193180
diff --git a/arch/arm/mach-shark/include/mach/uncompress.h b/arch/arm/mach-shark/include/mach/uncompress.h
new file mode 100644
index 0000000..3725e16
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/uncompress.h
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/mach-shark/include/mach/uncompress.h
+ * by Alexander Schulz
+ *
+ * derived from:
+ * arch/arm/mach-footbridge/include/mach/uncompress.h
+ * Copyright (C) 1996,1997,1998 Russell King
+ */
+
+#define SERIAL_BASE ((volatile unsigned char *)0x400003f8)
+
+static inline void putc(int c)
+{
+	int t;
+
+	SERIAL_BASE[0] = c;
+	t=0x10000;
+	while (t--);
+}
+
+static inline void flush(void)
+{
+}
+
+#ifdef DEBUG
+static void putn(unsigned long z)
+{
+	int i;
+	char x;
+
+	putc('0');
+	putc('x');
+	for (i=0;i<8;i++) {
+		x='0'+((z>>((7-i)*4))&0xf);
+		if (x>'9') x=x-'0'+'A'-10;
+		putc(x);
+	}
+}
+
+static void putr()
+{
+	putc('\n');
+	putc('\r');
+}
+#endif
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-shark/include/mach/vmalloc.h b/arch/arm/mach-shark/include/mach/vmalloc.h
new file mode 100644
index 0000000..f6c6837
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-shark/include/mach/vmalloc.h
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-shark/irq.c b/arch/arm/mach-shark/irq.c
index 5b0c6af..44b0811 100644
--- a/arch/arm/mach-shark/irq.c
+++ b/arch/arm/mach-shark/irq.c
@@ -4,7 +4,7 @@
  * by Alexander Schulz
  *
  * derived from linux/arch/ppc/kernel/i8259.c and:
- * include/asm-arm/arch-ebsa110/irq.h
+ * arch/arm/mach-ebsa110/include/mach/irq.h
  * Copyright (C) 1996-1998 Russell King
  */
 
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
index 333ece0..b189647 100644
--- a/arch/arm/mach-shark/leds.c
+++ b/arch/arm/mach-shark/leds.c
@@ -21,7 +21,7 @@
 #include <linux/spinlock.h>
 #include <linux/ioport.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/io.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 12097f4..d75e795 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -31,7 +31,7 @@
 
 #include <asm/cnt32_to_63.h>
 #include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S
new file mode 100644
index 0000000..b4ac00e
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/debug-macro.S
@@ -0,0 +1,23 @@
+/* arch/arm/mach-versatile/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx,      #0x10000000
+		movne	\rx,      #0xf1000000	@ virtual base
+		orr	\rx, \rx, #0x001F0000
+		orr	\rx, \rx, #0x00001000
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-versatile/include/mach/dma.h b/arch/arm/mach-versatile/include/mach/dma.h
new file mode 100644
index 0000000..0aabf12
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/dma.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/dma.h
+ *
+ *  Copyright (C) 2003 ARM Limited.
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-versatile/include/mach/entry-macro.S b/arch/arm/mach-versatile/include/mach/entry-macro.S
new file mode 100644
index 0000000..8c80209
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/entry-macro.S
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/mach-versatile/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Versatile platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/vic.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =IO_ADDRESS(VERSATILE_VIC_BASE)
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, [\base, #VIC_IRQ_STATUS]	@ get masked status
+		mov	\irqnr, #0
+		teq	\irqstat, #0
+		beq	1003f
+
+1001:		tst	\irqstat, #15
+		bne	1002f
+		add	\irqnr, \irqnr, #4
+		movs	\irqstat, \irqstat, lsr #4
+		bne	1001b
+1002:		tst	\irqstat, #1
+		bne	1003f
+		add	\irqnr, \irqnr, #1
+		movs	\irqstat, \irqstat, lsr #1
+		bne	1002b
+1003:		/* EQ will be set if no irqs pending */
+
+@		clz	\irqnr, \irqstat
+@1003:		/* EQ will be set if we reach MAXIRQNUM */
+		.endm
+
diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h
new file mode 100644
index 0000000..7aa906c
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/hardware.h
@@ -0,0 +1,52 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/hardware.h
+ *
+ *  This file contains the hardware definitions of the Versatile boards.
+ *
+ *  Copyright (C) 2003 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/platform.h>
+
+/*
+ * PCI space virtual addresses
+ */
+#define VERSATILE_PCI_VIRT_BASE		(void __iomem *)0xe8000000ul
+#define VERSATILE_PCI_CFG_VIRT_BASE	(void __iomem *)0xe9000000ul
+
+#if 0
+#define VERSATILE_PCI_VIRT_MEM_BASE0	0xf4000000
+#define VERSATILE_PCI_VIRT_MEM_BASE1	0xf5000000
+#define VERSATILE_PCI_VIRT_MEM_BASE2	0xf6000000
+
+#define PCIO_BASE			VERSATILE_PCI_VIRT_MEM_BASE0
+#define PCIMEM_BASE			VERSATILE_PCI_VIRT_MEM_BASE1
+#endif
+
+/* CIK guesswork */
+#define PCIBIOS_MIN_IO			0x44000000
+#define PCIBIOS_MIN_MEM			0x50000000
+
+#define pcibios_assign_all_busses()     1
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
+
+#endif
diff --git a/arch/arm/mach-versatile/include/mach/io.h b/arch/arm/mach-versatile/include/mach/io.h
new file mode 100644
index 0000000..c0b9dd1
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/io.h
@@ -0,0 +1,32 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/io.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+#define __io(a)	__io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-versatile/include/mach/irqs.h b/arch/arm/mach-versatile/include/mach/irqs.h
new file mode 100644
index 0000000..216a131
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/irqs.h
@@ -0,0 +1,211 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/irqs.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <mach/platform.h>
+
+/* 
+ *  IRQ interrupts definitions are the same as the INT definitions
+ *  held within platform.h
+ */
+#define IRQ_VIC_START		0
+#define IRQ_WDOGINT		(IRQ_VIC_START + INT_WDOGINT)
+#define IRQ_SOFTINT		(IRQ_VIC_START + INT_SOFTINT)
+#define IRQ_COMMRx		(IRQ_VIC_START + INT_COMMRx)
+#define IRQ_COMMTx		(IRQ_VIC_START + INT_COMMTx)
+#define IRQ_TIMERINT0_1		(IRQ_VIC_START + INT_TIMERINT0_1)
+#define IRQ_TIMERINT2_3		(IRQ_VIC_START + INT_TIMERINT2_3)
+#define IRQ_GPIOINT0		(IRQ_VIC_START + INT_GPIOINT0)
+#define IRQ_GPIOINT1		(IRQ_VIC_START + INT_GPIOINT1)
+#define IRQ_GPIOINT2		(IRQ_VIC_START + INT_GPIOINT2)
+#define IRQ_GPIOINT3		(IRQ_VIC_START + INT_GPIOINT3)
+#define IRQ_RTCINT		(IRQ_VIC_START + INT_RTCINT)
+#define IRQ_SSPINT		(IRQ_VIC_START + INT_SSPINT)
+#define IRQ_UARTINT0		(IRQ_VIC_START + INT_UARTINT0)
+#define IRQ_UARTINT1		(IRQ_VIC_START + INT_UARTINT1)
+#define IRQ_UARTINT2		(IRQ_VIC_START + INT_UARTINT2)
+#define IRQ_SCIINT		(IRQ_VIC_START + INT_SCIINT)
+#define IRQ_CLCDINT		(IRQ_VIC_START + INT_CLCDINT)
+#define IRQ_DMAINT		(IRQ_VIC_START + INT_DMAINT)
+#define IRQ_PWRFAILINT 		(IRQ_VIC_START + INT_PWRFAILINT)
+#define IRQ_MBXINT		(IRQ_VIC_START + INT_MBXINT)
+#define IRQ_GNDINT		(IRQ_VIC_START + INT_GNDINT)
+#define IRQ_VICSOURCE21		(IRQ_VIC_START + INT_VICSOURCE21)
+#define IRQ_VICSOURCE22		(IRQ_VIC_START + INT_VICSOURCE22)
+#define IRQ_VICSOURCE23		(IRQ_VIC_START + INT_VICSOURCE23)
+#define IRQ_VICSOURCE24		(IRQ_VIC_START + INT_VICSOURCE24)
+#define IRQ_VICSOURCE25		(IRQ_VIC_START + INT_VICSOURCE25)
+#define IRQ_VICSOURCE26		(IRQ_VIC_START + INT_VICSOURCE26)
+#define IRQ_VICSOURCE27		(IRQ_VIC_START + INT_VICSOURCE27)
+#define IRQ_VICSOURCE28		(IRQ_VIC_START + INT_VICSOURCE28)
+#define IRQ_VICSOURCE29		(IRQ_VIC_START + INT_VICSOURCE29)
+#define IRQ_VICSOURCE30		(IRQ_VIC_START + INT_VICSOURCE30)
+#define IRQ_VICSOURCE31		(IRQ_VIC_START + INT_VICSOURCE31)
+#define IRQ_VIC_END		(IRQ_VIC_START + 31)
+
+#define IRQMASK_WDOGINT		INTMASK_WDOGINT
+#define IRQMASK_SOFTINT		INTMASK_SOFTINT
+#define IRQMASK_COMMRx 		INTMASK_COMMRx
+#define IRQMASK_COMMTx 		INTMASK_COMMTx
+#define IRQMASK_TIMERINT0_1	INTMASK_TIMERINT0_1
+#define IRQMASK_TIMERINT2_3	INTMASK_TIMERINT2_3
+#define IRQMASK_GPIOINT0	INTMASK_GPIOINT0
+#define IRQMASK_GPIOINT1	INTMASK_GPIOINT1
+#define IRQMASK_GPIOINT2	INTMASK_GPIOINT2
+#define IRQMASK_GPIOINT3	INTMASK_GPIOINT3
+#define IRQMASK_RTCINT 		INTMASK_RTCINT
+#define IRQMASK_SSPINT 		INTMASK_SSPINT
+#define IRQMASK_UARTINT0	INTMASK_UARTINT0
+#define IRQMASK_UARTINT1	INTMASK_UARTINT1
+#define IRQMASK_UARTINT2	INTMASK_UARTINT2
+#define IRQMASK_SCIINT 		INTMASK_SCIINT
+#define IRQMASK_CLCDINT		INTMASK_CLCDINT
+#define IRQMASK_DMAINT 		INTMASK_DMAINT
+#define IRQMASK_PWRFAILINT	INTMASK_PWRFAILINT
+#define IRQMASK_MBXINT 		INTMASK_MBXINT
+#define IRQMASK_GNDINT 		INTMASK_GNDINT
+#define IRQMASK_VICSOURCE21	INTMASK_VICSOURCE21
+#define IRQMASK_VICSOURCE22	INTMASK_VICSOURCE22
+#define IRQMASK_VICSOURCE23	INTMASK_VICSOURCE23
+#define IRQMASK_VICSOURCE24	INTMASK_VICSOURCE24
+#define IRQMASK_VICSOURCE25	INTMASK_VICSOURCE25
+#define IRQMASK_VICSOURCE26	INTMASK_VICSOURCE26
+#define IRQMASK_VICSOURCE27	INTMASK_VICSOURCE27
+#define IRQMASK_VICSOURCE28	INTMASK_VICSOURCE28
+#define IRQMASK_VICSOURCE29	INTMASK_VICSOURCE29
+#define IRQMASK_VICSOURCE30	INTMASK_VICSOURCE30
+#define IRQMASK_VICSOURCE31	INTMASK_VICSOURCE31
+
+/* 
+ *  FIQ interrupts definitions are the same as the INT definitions.
+ */
+#define FIQ_WDOGINT		INT_WDOGINT
+#define FIQ_SOFTINT		INT_SOFTINT
+#define FIQ_COMMRx		INT_COMMRx
+#define FIQ_COMMTx		INT_COMMTx
+#define FIQ_TIMERINT0_1		INT_TIMERINT0_1
+#define FIQ_TIMERINT2_3		INT_TIMERINT2_3
+#define FIQ_GPIOINT0		INT_GPIOINT0
+#define FIQ_GPIOINT1		INT_GPIOINT1
+#define FIQ_GPIOINT2		INT_GPIOINT2
+#define FIQ_GPIOINT3		INT_GPIOINT3
+#define FIQ_RTCINT		INT_RTCINT
+#define FIQ_SSPINT		INT_SSPINT
+#define FIQ_UARTINT0		INT_UARTINT0
+#define FIQ_UARTINT1		INT_UARTINT1
+#define FIQ_UARTINT2		INT_UARTINT2
+#define FIQ_SCIINT		INT_SCIINT
+#define FIQ_CLCDINT		INT_CLCDINT
+#define FIQ_DMAINT		INT_DMAINT
+#define FIQ_PWRFAILINT 		INT_PWRFAILINT
+#define FIQ_MBXINT		INT_MBXINT
+#define FIQ_GNDINT		INT_GNDINT
+#define FIQ_VICSOURCE21		INT_VICSOURCE21
+#define FIQ_VICSOURCE22		INT_VICSOURCE22
+#define FIQ_VICSOURCE23		INT_VICSOURCE23
+#define FIQ_VICSOURCE24		INT_VICSOURCE24
+#define FIQ_VICSOURCE25		INT_VICSOURCE25
+#define FIQ_VICSOURCE26		INT_VICSOURCE26
+#define FIQ_VICSOURCE27		INT_VICSOURCE27
+#define FIQ_VICSOURCE28		INT_VICSOURCE28
+#define FIQ_VICSOURCE29		INT_VICSOURCE29
+#define FIQ_VICSOURCE30		INT_VICSOURCE30
+#define FIQ_VICSOURCE31		INT_VICSOURCE31
+
+
+#define FIQMASK_WDOGINT		INTMASK_WDOGINT
+#define FIQMASK_SOFTINT		INTMASK_SOFTINT
+#define FIQMASK_COMMRx 		INTMASK_COMMRx
+#define FIQMASK_COMMTx 		INTMASK_COMMTx
+#define FIQMASK_TIMERINT0_1	INTMASK_TIMERINT0_1
+#define FIQMASK_TIMERINT2_3	INTMASK_TIMERINT2_3
+#define FIQMASK_GPIOINT0	INTMASK_GPIOINT0
+#define FIQMASK_GPIOINT1	INTMASK_GPIOINT1
+#define FIQMASK_GPIOINT2	INTMASK_GPIOINT2
+#define FIQMASK_GPIOINT3	INTMASK_GPIOINT3
+#define FIQMASK_RTCINT 		INTMASK_RTCINT
+#define FIQMASK_SSPINT 		INTMASK_SSPINT
+#define FIQMASK_UARTINT0	INTMASK_UARTINT0
+#define FIQMASK_UARTINT1	INTMASK_UARTINT1
+#define FIQMASK_UARTINT2	INTMASK_UARTINT2
+#define FIQMASK_SCIINT 		INTMASK_SCIINT
+#define FIQMASK_CLCDINT		INTMASK_CLCDINT
+#define FIQMASK_DMAINT 		INTMASK_DMAINT
+#define FIQMASK_PWRFAILINT	INTMASK_PWRFAILINT
+#define FIQMASK_MBXINT 		INTMASK_MBXINT
+#define FIQMASK_GNDINT 		INTMASK_GNDINT
+#define FIQMASK_VICSOURCE21	INTMASK_VICSOURCE21
+#define FIQMASK_VICSOURCE22	INTMASK_VICSOURCE22
+#define FIQMASK_VICSOURCE23	INTMASK_VICSOURCE23
+#define FIQMASK_VICSOURCE24	INTMASK_VICSOURCE24
+#define FIQMASK_VICSOURCE25	INTMASK_VICSOURCE25
+#define FIQMASK_VICSOURCE26	INTMASK_VICSOURCE26
+#define FIQMASK_VICSOURCE27	INTMASK_VICSOURCE27
+#define FIQMASK_VICSOURCE28	INTMASK_VICSOURCE28
+#define FIQMASK_VICSOURCE29	INTMASK_VICSOURCE29
+#define FIQMASK_VICSOURCE30	INTMASK_VICSOURCE30
+#define FIQMASK_VICSOURCE31	INTMASK_VICSOURCE31
+
+/*
+ * Secondary interrupt controller
+ */
+#define IRQ_SIC_START		32
+#define IRQ_SIC_MMCI0B 		(IRQ_SIC_START + SIC_INT_MMCI0B)
+#define IRQ_SIC_MMCI1B 		(IRQ_SIC_START + SIC_INT_MMCI1B)
+#define IRQ_SIC_KMI0		(IRQ_SIC_START + SIC_INT_KMI0)
+#define IRQ_SIC_KMI1		(IRQ_SIC_START + SIC_INT_KMI1)
+#define IRQ_SIC_SCI3		(IRQ_SIC_START + SIC_INT_SCI3)
+#define IRQ_SIC_UART3		(IRQ_SIC_START + SIC_INT_UART3)
+#define IRQ_SIC_CLCD		(IRQ_SIC_START + SIC_INT_CLCD)
+#define IRQ_SIC_TOUCH		(IRQ_SIC_START + SIC_INT_TOUCH)
+#define IRQ_SIC_KEYPAD 		(IRQ_SIC_START + SIC_INT_KEYPAD)
+#define IRQ_SIC_DoC		(IRQ_SIC_START + SIC_INT_DoC)
+#define IRQ_SIC_MMCI0A 		(IRQ_SIC_START + SIC_INT_MMCI0A)
+#define IRQ_SIC_MMCI1A 		(IRQ_SIC_START + SIC_INT_MMCI1A)
+#define IRQ_SIC_AACI		(IRQ_SIC_START + SIC_INT_AACI)
+#define IRQ_SIC_ETH		(IRQ_SIC_START + SIC_INT_ETH)
+#define IRQ_SIC_USB		(IRQ_SIC_START + SIC_INT_USB)
+#define IRQ_SIC_PCI0		(IRQ_SIC_START + SIC_INT_PCI0)
+#define IRQ_SIC_PCI1		(IRQ_SIC_START + SIC_INT_PCI1)
+#define IRQ_SIC_PCI2		(IRQ_SIC_START + SIC_INT_PCI2)
+#define IRQ_SIC_PCI3		(IRQ_SIC_START + SIC_INT_PCI3)
+#define IRQ_SIC_END		63
+
+#define SIC_IRQMASK_MMCI0B	SIC_INTMASK_MMCI0B
+#define SIC_IRQMASK_MMCI1B	SIC_INTMASK_MMCI1B
+#define SIC_IRQMASK_KMI0	SIC_INTMASK_KMI0
+#define SIC_IRQMASK_KMI1	SIC_INTMASK_KMI1
+#define SIC_IRQMASK_SCI3	SIC_INTMASK_SCI3
+#define SIC_IRQMASK_UART3	SIC_INTMASK_UART3
+#define SIC_IRQMASK_CLCD	SIC_INTMASK_CLCD
+#define SIC_IRQMASK_TOUCH	SIC_INTMASK_TOUCH
+#define SIC_IRQMASK_KEYPAD	SIC_INTMASK_KEYPAD
+#define SIC_IRQMASK_DoC		SIC_INTMASK_DoC
+#define SIC_IRQMASK_MMCI0A	SIC_INTMASK_MMCI0A
+#define SIC_IRQMASK_MMCI1A	SIC_INTMASK_MMCI1A
+#define SIC_IRQMASK_AACI	SIC_INTMASK_AACI
+#define SIC_IRQMASK_ETH		SIC_INTMASK_ETH
+#define SIC_IRQMASK_USB		SIC_INTMASK_USB
+#define SIC_IRQMASK_PCI0	SIC_INTMASK_PCI0
+#define SIC_IRQMASK_PCI1	SIC_INTMASK_PCI1
+#define SIC_IRQMASK_PCI2	SIC_INTMASK_PCI2
+#define SIC_IRQMASK_PCI3	SIC_INTMASK_PCI3
+
+#define NR_IRQS			64
diff --git a/arch/arm/mach-versatile/include/mach/memory.h b/arch/arm/mach-versatile/include/mach/memory.h
new file mode 100644
index 0000000..b6315c0
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/memory.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/memory.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
+#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
+
+#endif
diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h
new file mode 100644
index 0000000..27cbe6a
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/platform.h
@@ -0,0 +1,510 @@
+/*
+ * arch/arm/mach-versatile/include/mach/platform.h
+ *
+ * Copyright (c) ARM Limited 2003.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __address_h
+#define __address_h                     1
+
+/*
+ * Memory definitions
+ */
+#define VERSATILE_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
+#define VERSATILE_BOOT_ROM_HI          0x30000000
+#define VERSATILE_BOOT_ROM_BASE        VERSATILE_BOOT_ROM_HI	 /*  Normal position */
+#define VERSATILE_BOOT_ROM_SIZE        SZ_64M
+
+#define VERSATILE_SSRAM_BASE           /* VERSATILE_SSMC_BASE ? */
+#define VERSATILE_SSRAM_SIZE           SZ_2M
+
+#define VERSATILE_FLASH_BASE           0x34000000
+#define VERSATILE_FLASH_SIZE           SZ_64M
+
+/* 
+ *  SDRAM
+ */
+#define VERSATILE_SDRAM_BASE           0x00000000
+
+/* 
+ *  Logic expansion modules
+ * 
+ */
+
+
+/* ------------------------------------------------------------------------
+ *  Versatile Registers
+ * ------------------------------------------------------------------------
+ * 
+ */
+#define VERSATILE_SYS_ID_OFFSET               0x00
+#define VERSATILE_SYS_SW_OFFSET               0x04
+#define VERSATILE_SYS_LED_OFFSET              0x08
+#define VERSATILE_SYS_OSC0_OFFSET             0x0C
+
+#if defined(CONFIG_ARCH_VERSATILE_PB)
+#define VERSATILE_SYS_OSC1_OFFSET             0x10
+#define VERSATILE_SYS_OSC2_OFFSET             0x14
+#define VERSATILE_SYS_OSC3_OFFSET             0x18
+#define VERSATILE_SYS_OSC4_OFFSET             0x1C
+#elif defined(CONFIG_MACH_VERSATILE_AB)
+#define VERSATILE_SYS_OSC1_OFFSET             0x1C
+#endif
+
+#define VERSATILE_SYS_OSCCLCD_OFFSET          0x1c
+
+#define VERSATILE_SYS_LOCK_OFFSET             0x20
+#define VERSATILE_SYS_100HZ_OFFSET            0x24
+#define VERSATILE_SYS_CFGDATA1_OFFSET         0x28
+#define VERSATILE_SYS_CFGDATA2_OFFSET         0x2C
+#define VERSATILE_SYS_FLAGS_OFFSET            0x30
+#define VERSATILE_SYS_FLAGSSET_OFFSET         0x30
+#define VERSATILE_SYS_FLAGSCLR_OFFSET         0x34
+#define VERSATILE_SYS_NVFLAGS_OFFSET          0x38
+#define VERSATILE_SYS_NVFLAGSSET_OFFSET       0x38
+#define VERSATILE_SYS_NVFLAGSCLR_OFFSET       0x3C
+#define VERSATILE_SYS_RESETCTL_OFFSET         0x40
+#define VERSATILE_SYS_PCICTL_OFFSET           0x44
+#define VERSATILE_SYS_MCI_OFFSET              0x48
+#define VERSATILE_SYS_FLASH_OFFSET            0x4C
+#define VERSATILE_SYS_CLCD_OFFSET             0x50
+#define VERSATILE_SYS_CLCDSER_OFFSET          0x54
+#define VERSATILE_SYS_BOOTCS_OFFSET           0x58
+#define VERSATILE_SYS_24MHz_OFFSET            0x5C
+#define VERSATILE_SYS_MISC_OFFSET             0x60
+#define VERSATILE_SYS_TEST_OSC0_OFFSET        0x80
+#define VERSATILE_SYS_TEST_OSC1_OFFSET        0x84
+#define VERSATILE_SYS_TEST_OSC2_OFFSET        0x88
+#define VERSATILE_SYS_TEST_OSC3_OFFSET        0x8C
+#define VERSATILE_SYS_TEST_OSC4_OFFSET        0x90
+
+#define VERSATILE_SYS_BASE                    0x10000000
+#define VERSATILE_SYS_ID                      (VERSATILE_SYS_BASE + VERSATILE_SYS_ID_OFFSET)
+#define VERSATILE_SYS_SW                      (VERSATILE_SYS_BASE + VERSATILE_SYS_SW_OFFSET)
+#define VERSATILE_SYS_LED                     (VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET)
+#define VERSATILE_SYS_OSC0                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC0_OFFSET)
+#define VERSATILE_SYS_OSC1                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC1_OFFSET)
+
+#if defined(CONFIG_ARCH_VERSATILE_PB)
+#define VERSATILE_SYS_OSC2                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC2_OFFSET)
+#define VERSATILE_SYS_OSC3                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC3_OFFSET)
+#define VERSATILE_SYS_OSC4                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC4_OFFSET)
+#endif
+
+#define VERSATILE_SYS_LOCK                    (VERSATILE_SYS_BASE + VERSATILE_SYS_LOCK_OFFSET)
+#define VERSATILE_SYS_100HZ                   (VERSATILE_SYS_BASE + VERSATILE_SYS_100HZ_OFFSET)
+#define VERSATILE_SYS_CFGDATA1                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA1_OFFSET)
+#define VERSATILE_SYS_CFGDATA2                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA2_OFFSET)
+#define VERSATILE_SYS_FLAGS                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGS_OFFSET)
+#define VERSATILE_SYS_FLAGSSET                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSSET_OFFSET)
+#define VERSATILE_SYS_FLAGSCLR                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSCLR_OFFSET)
+#define VERSATILE_SYS_NVFLAGS                 (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGS_OFFSET)
+#define VERSATILE_SYS_NVFLAGSSET              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSSET_OFFSET)
+#define VERSATILE_SYS_NVFLAGSCLR              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSCLR_OFFSET)
+#define VERSATILE_SYS_RESETCTL                (VERSATILE_SYS_BASE + VERSATILE_SYS_RESETCTL_OFFSET)
+#define VERSATILE_SYS_PCICTL                  (VERSATILE_SYS_BASE + VERSATILE_SYS_PCICTL_OFFSET)
+#define VERSATILE_SYS_MCI                     (VERSATILE_SYS_BASE + VERSATILE_SYS_MCI_OFFSET)
+#define VERSATILE_SYS_FLASH                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET)
+#define VERSATILE_SYS_CLCD                    (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCD_OFFSET)
+#define VERSATILE_SYS_CLCDSER                 (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCDSER_OFFSET)
+#define VERSATILE_SYS_BOOTCS                  (VERSATILE_SYS_BASE + VERSATILE_SYS_BOOTCS_OFFSET)
+#define VERSATILE_SYS_24MHz                   (VERSATILE_SYS_BASE + VERSATILE_SYS_24MHz_OFFSET)
+#define VERSATILE_SYS_MISC                    (VERSATILE_SYS_BASE + VERSATILE_SYS_MISC_OFFSET)
+#define VERSATILE_SYS_TEST_OSC0               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC0_OFFSET)
+#define VERSATILE_SYS_TEST_OSC1               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC1_OFFSET)
+#define VERSATILE_SYS_TEST_OSC2               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC2_OFFSET)
+#define VERSATILE_SYS_TEST_OSC3               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC3_OFFSET)
+#define VERSATILE_SYS_TEST_OSC4               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC4_OFFSET)
+
+/* 
+ * Values for VERSATILE_SYS_RESET_CTRL
+ */
+#define VERSATILE_SYS_CTRL_RESET_CONFIGCLR    0x01
+#define VERSATILE_SYS_CTRL_RESET_CONFIGINIT   0x02
+#define VERSATILE_SYS_CTRL_RESET_DLLRESET     0x03
+#define VERSATILE_SYS_CTRL_RESET_PLLRESET     0x04
+#define VERSATILE_SYS_CTRL_RESET_POR          0x05
+#define VERSATILE_SYS_CTRL_RESET_DoC          0x06
+
+#define VERSATILE_SYS_CTRL_LED         (1 << 0)
+
+
+/* ------------------------------------------------------------------------
+ *  Versatile control registers
+ * ------------------------------------------------------------------------
+ */
+
+/* 
+ * VERSATILE_IDFIELD
+ *
+ * 31:24 = manufacturer (0x41 = ARM)
+ * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
+ * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
+ * 11:4  = build value
+ * 3:0   = revision number (0x1 = rev B (AHB))
+ */
+
+/*
+ * VERSATILE_SYS_LOCK
+ *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
+ *     SYS_CLD, SYS_BOOTCS
+ */
+#define VERSATILE_SYS_LOCK_LOCKED    (1 << 16)
+#define VERSATILE_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
+
+/*
+ * VERSATILE_SYS_FLASH
+ */
+#define VERSATILE_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
+
+/*
+ * VERSATILE_INTREG
+ *     - used to acknowledge and control MMCI and UART interrupts 
+ */
+#define VERSATILE_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
+#define VERSATILE_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
+#define VERSATILE_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
+                                                /* write 1 to acknowledge and clear               */
+#define VERSATILE_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
+#define VERSATILE_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
+
+/*
+ * VERSATILE peripheral addresses
+ */
+#define VERSATILE_PCI_CORE_BASE        0x10001000	/* PCI core control */
+#define VERSATILE_I2C_BASE             0x10002000	/* I2C control */
+#define VERSATILE_SIC_BASE             0x10003000	/* Secondary interrupt controller */
+#define VERSATILE_AACI_BASE            0x10004000	/* Audio */
+#define VERSATILE_MMCI0_BASE           0x10005000	/* MMC interface */
+#define VERSATILE_KMI0_BASE            0x10006000	/* KMI interface */
+#define VERSATILE_KMI1_BASE            0x10007000	/* KMI 2nd interface */
+#define VERSATILE_CHAR_LCD_BASE        0x10008000	/* Character LCD */
+#define VERSATILE_UART3_BASE           0x10009000	/* UART 3 */
+#define VERSATILE_SCI1_BASE            0x1000A000
+#define VERSATILE_MMCI1_BASE           0x1000B000    /* MMC Interface */
+	/* 0x1000C000 - 0x1000CFFF = reserved */
+#define VERSATILE_ETH_BASE             0x10010000	/* Ethernet */
+#define VERSATILE_USB_BASE             0x10020000	/* USB */
+	/* 0x10030000 - 0x100FFFFF = reserved */
+#define VERSATILE_SMC_BASE             0x10100000	/* SMC */
+#define VERSATILE_MPMC_BASE            0x10110000	/* MPMC */
+#define VERSATILE_CLCD_BASE            0x10120000	/* CLCD */
+#define VERSATILE_DMAC_BASE            0x10130000	/* DMA controller */
+#define VERSATILE_VIC_BASE             0x10140000	/* Vectored interrupt controller */
+#define VERSATILE_PERIPH_BASE          0x10150000    /* off-chip peripherals alias from */
+                                                /* 0x10000000 - 0x100FFFFF */
+#define VERSATILE_AHBM_BASE            0x101D0000	/* AHB monitor */
+#define VERSATILE_SCTL_BASE            0x101E0000	/* System controller */
+#define VERSATILE_WATCHDOG_BASE        0x101E1000	/* Watchdog */
+#define VERSATILE_TIMER0_1_BASE        0x101E2000	/* Timer 0 and 1 */
+#define VERSATILE_TIMER2_3_BASE        0x101E3000	/* Timer 2 and 3 */
+#define VERSATILE_GPIO0_BASE           0x101E4000	/* GPIO port 0 */
+#define VERSATILE_GPIO1_BASE           0x101E5000    /* GPIO port 1 */
+#define VERSATILE_GPIO2_BASE           0x101E6000	/* GPIO port 2 */
+#define VERSATILE_GPIO3_BASE           0x101E7000	/* GPIO port 3 */
+#define VERSATILE_RTC_BASE             0x101E8000	/* Real Time Clock */
+	/* 0x101E9000 - reserved */
+#define VERSATILE_SCI_BASE             0x101F0000	/* Smart card controller */
+#define VERSATILE_UART0_BASE           0x101F1000	/* Uart 0 */
+#define VERSATILE_UART1_BASE           0x101F2000	/* Uart 1 */
+#define VERSATILE_UART2_BASE           0x101F3000	/* Uart 2 */
+#define VERSATILE_SSP_BASE             0x101F4000	/* Synchronous Serial Port */
+
+#define VERSATILE_SSMC_BASE            0x20000000	/* SSMC */
+#define VERSATILE_IB2_BASE             0x24000000	/* IB2 module */
+#define VERSATILE_MBX_BASE             0x40000000	/* MBX */
+
+/* PCI space */
+#define VERSATILE_PCI_BASE             0x41000000	/* PCI Interface */
+#define VERSATILE_PCI_CFG_BASE	       0x42000000
+#define VERSATILE_PCI_MEM_BASE0        0x44000000
+#define VERSATILE_PCI_MEM_BASE1        0x50000000
+#define VERSATILE_PCI_MEM_BASE2        0x60000000
+/* Sizes of above maps */
+#define VERSATILE_PCI_BASE_SIZE	       0x01000000
+#define VERSATILE_PCI_CFG_BASE_SIZE    0x02000000
+#define VERSATILE_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
+#define VERSATILE_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
+#define VERSATILE_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
+
+#define VERSATILE_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
+#define VERSATILE_LT_BASE              0x80000000	/* Logic Tile expansion */
+
+/*
+ * Disk on Chip
+ */
+#define VERSATILE_DOC_BASE             0x2C000000
+#define VERSATILE_DOC_SIZE             (16 << 20)
+#define VERSATILE_DOC_PAGE_SIZE        512
+#define VERSATILE_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
+
+#define ERASE_UNIT_PAGES    32
+#define START_PAGE          0x80
+
+/* 
+ *  LED settings, bits [7:0]
+ */
+#define VERSATILE_SYS_LED0             (1 << 0)
+#define VERSATILE_SYS_LED1             (1 << 1)
+#define VERSATILE_SYS_LED2             (1 << 2)
+#define VERSATILE_SYS_LED3             (1 << 3)
+#define VERSATILE_SYS_LED4             (1 << 4)
+#define VERSATILE_SYS_LED5             (1 << 5)
+#define VERSATILE_SYS_LED6             (1 << 6)
+#define VERSATILE_SYS_LED7             (1 << 7)
+
+#define ALL_LEDS                  0xFF
+
+#define LED_BANK                  VERSATILE_SYS_LED
+
+/* 
+ * Control registers
+ */
+#define VERSATILE_IDFIELD_OFFSET	0x0	/* Versatile build information */
+#define VERSATILE_FLASHPROG_OFFSET	0x4	/* Flash devices */
+#define VERSATILE_INTREG_OFFSET		0x8	/* Interrupt control */
+#define VERSATILE_DECODE_OFFSET		0xC	/* Fitted logic modules */
+
+
+/* ------------------------------------------------------------------------
+ *  Versatile Interrupt Controller - control registers
+ * ------------------------------------------------------------------------
+ * 
+ *  Offsets from interrupt controller base 
+ * 
+ *  System Controller interrupt controller base is
+ * 
+ * 	VERSATILE_IC_BASE
+ * 
+ *  Core Module interrupt controller base is
+ * 
+ * 	VERSATILE_SYS_IC 
+ * 
+ */
+/* VIC definitions in include/asm-arm/hardware/vic.h */
+
+#define SIC_IRQ_STATUS                  0
+#define SIC_IRQ_RAW_STATUS              0x04
+#define SIC_IRQ_ENABLE                  0x08
+#define SIC_IRQ_ENABLE_SET              0x08
+#define SIC_IRQ_ENABLE_CLEAR            0x0C
+#define SIC_INT_SOFT_SET                0x10
+#define SIC_INT_SOFT_CLEAR              0x14
+#define SIC_INT_PIC_ENABLE              0x20	/* read status of pass through mask */
+#define SIC_INT_PIC_ENABLES             0x20	/* set interrupt pass through bits */
+#define SIC_INT_PIC_ENABLEC             0x24	/* Clear interrupt pass through bits */
+
+/* ------------------------------------------------------------------------
+ *  Interrupts - bit assignment (primary)
+ * ------------------------------------------------------------------------
+ */
+
+#define INT_WDOGINT                     0	/* Watchdog timer */
+#define INT_SOFTINT                     1	/* Software interrupt */
+#define INT_COMMRx                      2	/* Debug Comm Rx interrupt */
+#define INT_COMMTx                      3	/* Debug Comm Tx interrupt */
+#define INT_TIMERINT0_1                 4	/* Timer 0 and 1 */
+#define INT_TIMERINT2_3                 5	/* Timer 2 and 3 */
+#define INT_GPIOINT0                    6	/* GPIO 0 */
+#define INT_GPIOINT1                    7	/* GPIO 1 */
+#define INT_GPIOINT2                    8	/* GPIO 2 */
+#define INT_GPIOINT3                    9	/* GPIO 3 */
+#define INT_RTCINT                      10	/* Real Time Clock */
+#define INT_SSPINT                      11	/* Synchronous Serial Port */
+#define INT_UARTINT0                    12	/* UART 0 on development chip */
+#define INT_UARTINT1                    13	/* UART 1 on development chip */
+#define INT_UARTINT2                    14	/* UART 2 on development chip */
+#define INT_SCIINT                      15	/* Smart Card Interface */
+#define INT_CLCDINT                     16	/* CLCD controller */
+#define INT_DMAINT                      17	/* DMA controller */
+#define INT_PWRFAILINT                  18	/* Power failure */
+#define INT_MBXINT                      19	/* Graphics processor */
+#define INT_GNDINT                      20	/* Reserved */
+	/* External interrupt signals from logic tiles or secondary controller */
+#define INT_VICSOURCE21                 21	/* Disk on Chip */
+#define INT_VICSOURCE22                 22	/* MCI0A */
+#define INT_VICSOURCE23                 23	/* MCI1A */
+#define INT_VICSOURCE24                 24	/* AACI */
+#define INT_VICSOURCE25                 25	/* Ethernet */
+#define INT_VICSOURCE26                 26	/* USB */
+#define INT_VICSOURCE27                 27	/* PCI 0 */
+#define INT_VICSOURCE28                 28	/* PCI 1 */
+#define INT_VICSOURCE29                 29	/* PCI 2 */
+#define INT_VICSOURCE30                 30	/* PCI 3 */
+#define INT_VICSOURCE31                 31	/* SIC source */
+
+/* 
+ *  Interrupt bit positions
+ * 
+ */
+#define INTMASK_WDOGINT                 (1 << INT_WDOGINT)
+#define INTMASK_SOFTINT                 (1 << INT_SOFTINT)
+#define INTMASK_COMMRx                  (1 << INT_COMMRx)
+#define INTMASK_COMMTx                  (1 << INT_COMMTx)
+#define INTMASK_TIMERINT0_1             (1 << INT_TIMERINT0_1)
+#define INTMASK_TIMERINT2_3             (1 << INT_TIMERINT2_3)
+#define INTMASK_GPIOINT0                (1 << INT_GPIOINT0)
+#define INTMASK_GPIOINT1                (1 << INT_GPIOINT1)
+#define INTMASK_GPIOINT2                (1 << INT_GPIOINT2)
+#define INTMASK_GPIOINT3                (1 << INT_GPIOINT3)
+#define INTMASK_RTCINT                  (1 << INT_RTCINT)
+#define INTMASK_SSPINT                  (1 << INT_SSPINT)
+#define INTMASK_UARTINT0                (1 << INT_UARTINT0)
+#define INTMASK_UARTINT1                (1 << INT_UARTINT1)
+#define INTMASK_UARTINT2                (1 << INT_UARTINT2)
+#define INTMASK_SCIINT                  (1 << INT_SCIINT)
+#define INTMASK_CLCDINT                 (1 << INT_CLCDINT)
+#define INTMASK_DMAINT                  (1 << INT_DMAINT)
+#define INTMASK_PWRFAILINT              (1 << INT_PWRFAILINT)
+#define INTMASK_MBXINT                  (1 << INT_MBXINT)
+#define INTMASK_GNDINT                  (1 << INT_GNDINT)
+#define INTMASK_VICSOURCE21             (1 << INT_VICSOURCE21)
+#define INTMASK_VICSOURCE22             (1 << INT_VICSOURCE22)
+#define INTMASK_VICSOURCE23             (1 << INT_VICSOURCE23)
+#define INTMASK_VICSOURCE24             (1 << INT_VICSOURCE24)
+#define INTMASK_VICSOURCE25             (1 << INT_VICSOURCE25)
+#define INTMASK_VICSOURCE26             (1 << INT_VICSOURCE26)
+#define INTMASK_VICSOURCE27             (1 << INT_VICSOURCE27)
+#define INTMASK_VICSOURCE28             (1 << INT_VICSOURCE28)
+#define INTMASK_VICSOURCE29             (1 << INT_VICSOURCE29)
+#define INTMASK_VICSOURCE30             (1 << INT_VICSOURCE30)
+#define INTMASK_VICSOURCE31             (1 << INT_VICSOURCE31)
+
+
+#define VERSATILE_SC_VALID_INT               0x003FFFFF
+
+#define MAXIRQNUM                       31
+#define MAXFIQNUM                       31
+#define MAXSWINUM                       31
+
+/* ------------------------------------------------------------------------
+ *  Interrupts - bit assignment (secondary)
+ * ------------------------------------------------------------------------
+ */
+#define SIC_INT_MMCI0B                  1	/* Multimedia Card 0B */
+#define SIC_INT_MMCI1B                  2	/* Multimedia Card 1B */
+#define SIC_INT_KMI0                    3	/* Keyboard/Mouse port 0 */
+#define SIC_INT_KMI1                    4	/* Keyboard/Mouse port 1 */
+#define SIC_INT_SCI3                    5	/* Smart Card interface */
+#define SIC_INT_UART3                   6	/* UART 3 empty or data available */
+#define SIC_INT_CLCD                    7	/* Character LCD */
+#define SIC_INT_TOUCH                   8	/* Touchscreen */
+#define SIC_INT_KEYPAD                  9	/* Key pressed on display keypad */
+	/* 10:20 - reserved */
+#define SIC_INT_DoC                     21	/* Disk on Chip memory controller */
+#define SIC_INT_MMCI0A                  22	/* MMC 0A */
+#define SIC_INT_MMCI1A                  23	/* MMC 1A */
+#define SIC_INT_AACI                    24	/* Audio Codec */
+#define SIC_INT_ETH                     25	/* Ethernet controller */
+#define SIC_INT_USB                     26	/* USB controller */
+#define SIC_INT_PCI0                    27
+#define SIC_INT_PCI1                    28
+#define SIC_INT_PCI2                    29
+#define SIC_INT_PCI3                    30
+
+
+#define SIC_INTMASK_MMCI0B              (1 << SIC_INT_MMCI0B)
+#define SIC_INTMASK_MMCI1B              (1 << SIC_INT_MMCI1B)
+#define SIC_INTMASK_KMI0                (1 << SIC_INT_KMI0)
+#define SIC_INTMASK_KMI1                (1 << SIC_INT_KMI1)
+#define SIC_INTMASK_SCI3                (1 << SIC_INT_SCI3)
+#define SIC_INTMASK_UART3               (1 << SIC_INT_UART3)
+#define SIC_INTMASK_CLCD                (1 << SIC_INT_CLCD)
+#define SIC_INTMASK_TOUCH               (1 << SIC_INT_TOUCH)
+#define SIC_INTMASK_KEYPAD              (1 << SIC_INT_KEYPAD)
+#define SIC_INTMASK_DoC                 (1 << SIC_INT_DoC)
+#define SIC_INTMASK_MMCI0A              (1 << SIC_INT_MMCI0A)
+#define SIC_INTMASK_MMCI1A              (1 << SIC_INT_MMCI1A)
+#define SIC_INTMASK_AACI                (1 << SIC_INT_AACI)
+#define SIC_INTMASK_ETH                 (1 << SIC_INT_ETH)
+#define SIC_INTMASK_USB                 (1 << SIC_INT_USB)
+#define SIC_INTMASK_PCI0                (1 << SIC_INT_PCI0)
+#define SIC_INTMASK_PCI1                (1 << SIC_INT_PCI1)
+#define SIC_INTMASK_PCI2                (1 << SIC_INT_PCI2)
+#define SIC_INTMASK_PCI3                (1 << SIC_INT_PCI3)
+/* 
+ *  Application Flash
+ * 
+ */
+#define FLASH_BASE                      VERSATILE_FLASH_BASE
+#define FLASH_SIZE                      VERSATILE_FLASH_SIZE
+#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
+#define FLASH_BLOCK_SIZE                SZ_128K
+
+/* 
+ *  Boot Flash
+ * 
+ */
+#define EPROM_BASE                      VERSATILE_BOOT_ROM_HI
+#define EPROM_SIZE                      VERSATILE_BOOT_ROM_SIZE
+#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
+
+/* 
+ *  Clean base - dummy
+ * 
+ */
+#define CLEAN_BASE                      EPROM_BASE
+
+/*
+ * System controller bit assignment
+ */
+#define VERSATILE_REFCLK	0
+#define VERSATILE_TIMCLK	1
+
+#define VERSATILE_TIMER1_EnSel	15
+#define VERSATILE_TIMER2_EnSel	17
+#define VERSATILE_TIMER3_EnSel	19
+#define VERSATILE_TIMER4_EnSel	21
+
+
+#define MAX_TIMER                       2
+#define MAX_PERIOD                      699050
+#define TICKS_PER_uSEC                  1
+
+/* 
+ *  These are useconds NOT ticks.  
+ * 
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+#define VERSATILE_CSR_BASE             0x10000000
+#define VERSATILE_CSR_SIZE             0x10000000
+
+#ifdef CONFIG_MACH_VERSATILE_AB
+/*
+ * IB2 Versatile/AB expansion board definitions
+ */
+#define VERSATILE_IB2_CAMERA_BANK	VERSATILE_IB2_BASE
+#define VERSATILE_IB2_KBD_DATAREG	(VERSATILE_IB2_BASE + 0x01000000)
+
+/* VICINTSOURCE27 */
+#define VERSATILE_IB2_INT_BASE		(VERSATILE_IB2_BASE + 0x02000000)
+#define VERSATILE_IB2_IER		(VERSATILE_IB2_INT_BASE + 0)
+#define VERSATILE_IB2_ISR		(VERSATILE_IB2_INT_BASE + 4)
+
+#define VERSATILE_IB2_CTL_BASE		(VERSATILE_IB2_BASE + 0x03000000)
+#define VERSATILE_IB2_CTRL		(VERSATILE_IB2_CTL_BASE + 0)
+#define VERSATILE_IB2_STAT		(VERSATILE_IB2_CTL_BASE + 4)
+#endif
+
+#endif
+
+/* 	END */
diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h
new file mode 100644
index 0000000..91fa559
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/system.h
@@ -0,0 +1,49 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/system.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <mach/platform.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	u32 val;
+
+	val = __raw_readl(IO_ADDRESS(VERSATILE_SYS_RESETCTL)) & ~0x7;
+	val |= 0x105;
+
+	__raw_writel(0xa05f, IO_ADDRESS(VERSATILE_SYS_LOCK));
+	__raw_writel(val, IO_ADDRESS(VERSATILE_SYS_RESETCTL));
+	__raw_writel(0, IO_ADDRESS(VERSATILE_SYS_LOCK));
+}
+
+#endif
diff --git a/arch/arm/mach-versatile/include/mach/timex.h b/arch/arm/mach-versatile/include/mach/timex.h
new file mode 100644
index 0000000..426199b
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/timex.h
@@ -0,0 +1,23 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/timex.h
+ *
+ *  Versatile architecture timex specifications
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/arch/arm/mach-versatile/include/mach/uncompress.h b/arch/arm/mach-versatile/include/mach/uncompress.h
new file mode 100644
index 0000000..3dd0048
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/uncompress.h
@@ -0,0 +1,46 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define AMBA_UART_DR	(*(volatile unsigned char *)0x101F1000)
+#define AMBA_UART_LCRH	(*(volatile unsigned char *)0x101F102C)
+#define AMBA_UART_CR	(*(volatile unsigned char *)0x101F1030)
+#define AMBA_UART_FR	(*(volatile unsigned char *)0x101F1018)
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	while (AMBA_UART_FR & (1 << 5))
+		barrier();
+
+	AMBA_UART_DR = c;
+}
+
+static inline void flush(void)
+{
+	while (AMBA_UART_FR & (1 << 3))
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-versatile/include/mach/vmalloc.h b/arch/arm/mach-versatile/include/mach/vmalloc.h
new file mode 100644
index 0000000..427e361
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END		(PAGE_OFFSET + 0x18000000)
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index 4335c07..36f23f8 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -22,7 +22,7 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index 6e1fe3b..76375c6 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 2eeda4b..1725f01 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S
index 3e8d8c7..3b3639e 100644
--- a/arch/arm/mm/cache-v3.S
+++ b/arch/arm/mm/cache-v3.S
@@ -9,7 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index 8e23c8d..33926c9 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -9,7 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index d67829f..51a9b0b 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -13,7 +13,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index d05e235..bbe1057 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -18,7 +18,7 @@
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/elf.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 56bd3bf..871ba01 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -23,7 +23,7 @@
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/elf.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 6a0adec..7bd9e71 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -28,7 +28,7 @@
 #include <linux/init.h>
 #include <asm/assembler.h>
 #include <asm/elf.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/page.h>
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
index 65e26c1..92db6e0 100644
--- a/arch/arm/oprofile/op_model_mpcore.c
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -40,7 +40,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 
 #include "op_counter.h"
diff --git a/arch/arm/plat-iop/adma.c b/arch/arm/plat-iop/adma.c
index 53c5e9a..f724208 100644
--- a/arch/arm/plat-iop/adma.c
+++ b/arch/arm/plat-iop/adma.c
@@ -19,7 +19,7 @@
 #include <linux/platform_device.h>
 #include <asm/hardware/iop3xx.h>
 #include <linux/dma-mapping.h>
-#include <asm/arch/adma.h>
+#include <mach/adma.h>
 #include <asm/hardware/iop_adma.h>
 
 #ifdef CONFIG_ARCH_IOP32X
diff --git a/arch/arm/plat-iop/i2c.c b/arch/arm/plat-iop/i2c.c
index b7b8fcb..6dcbcc4 100644
--- a/arch/arm/plat-iop/i2c.c
+++ b/arch/arm/plat-iop/i2c.c
@@ -25,7 +25,7 @@
 #include <asm/setup.h>
 #include <asm/system.h>
 #include <asm/memory.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iop3xx.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/plat-iop/io.c b/arch/arm/plat-iop/io.c
index c30d188..39dcfb4 100644
--- a/arch/arm/plat-iop/io.c
+++ b/arch/arm/plat-iop/io.c
@@ -18,7 +18,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 void * __iomem __iop3xx_ioremap(unsigned long cookie, size_t size,
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index e32054f..54708bf 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -21,7 +21,7 @@
 #include <asm/irq.h>
 #include <asm/signal.h>
 #include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/pci.h>
 #include <asm/hardware/iop3xx.h>
 
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index da9e824..c53fefb 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -18,13 +18,13 @@
 #include <linux/time.h>
 #include <linux/init.h>
 #include <linux/timex.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 static unsigned long ticks_per_jiffy;
 static unsigned long ticks_per_usec;
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 1aa86fd..2f86272 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -39,7 +39,7 @@
 #include <linux/string.h>
 #include <linux/version.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 73d3046..733e0ac 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -23,7 +23,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm-generic/bug.h>
 
 static struct mxc_gpio_port *mxc_gpio_ports;
diff --git a/include/asm-arm/arch-mxc/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
similarity index 100%
rename from include/asm-arm/arch-mxc/board-mx27ads.h
rename to arch/arm/plat-mxc/include/mach/board-mx27ads.h
diff --git a/include/asm-arm/arch-mxc/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
similarity index 100%
rename from include/asm-arm/arch-mxc/board-mx31ads.h
rename to arch/arm/plat-mxc/include/mach/board-mx31ads.h
diff --git a/include/asm-arm/arch-mxc/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
similarity index 100%
rename from include/asm-arm/arch-mxc/board-mx31lite.h
rename to arch/arm/plat-mxc/include/mach/board-mx31lite.h
diff --git a/include/asm-arm/arch-mxc/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
similarity index 100%
rename from include/asm-arm/arch-mxc/board-pcm037.h
rename to arch/arm/plat-mxc/include/mach/board-pcm037.h
diff --git a/include/asm-arm/arch-mxc/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
similarity index 100%
rename from include/asm-arm/arch-mxc/board-pcm038.h
rename to arch/arm/plat-mxc/include/mach/board-pcm038.h
diff --git a/include/asm-arm/arch-mxc/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
similarity index 100%
rename from include/asm-arm/arch-mxc/clock.h
rename to arch/arm/plat-mxc/include/mach/clock.h
diff --git a/include/asm-arm/arch-mxc/common.h b/arch/arm/plat-mxc/include/mach/common.h
similarity index 100%
rename from include/asm-arm/arch-mxc/common.h
rename to arch/arm/plat-mxc/include/mach/common.h
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
new file mode 100644
index 0000000..b9907be
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -0,0 +1,49 @@
+/* arch/arm/mach-imx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/hardware.h>
+
+#ifdef CONFIG_MACH_MX31ADS
+#include <mach/board-mx31ads.h>
+#endif
+#ifdef CONFIG_MACH_PCM037
+#include <mach/board-pcm037.h>
+#endif
+#ifdef CONFIG_MACH_MX31LITE
+#include <mach/board-mx31lite.h>
+#endif
+#ifdef CONFIG_MACH_MX27ADS
+#include <mach/board-mx27ads.h>
+#endif
+#ifdef CONFIG_MACH_PCM038
+#include <mach/board-pcm038.h>
+#endif
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		ldreq	\rx, =MXC_LL_UART_PADDR	@ physical
+		ldrne	\rx, =MXC_LL_UART_VADDR	@ virtual
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x40]	@ TXDATA
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x98]	@ SR2
+		tst	\rd, #1 << 3		@ TXDC
+		beq	1002b			@ wait until transmit done
+		.endm
diff --git a/include/asm-arm/arch-mxc/dma.h b/arch/arm/plat-mxc/include/mach/dma.h
similarity index 100%
rename from include/asm-arm/arch-mxc/dma.h
rename to arch/arm/plat-mxc/include/mach/dma.h
diff --git a/include/asm-arm/arch-mxc/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
similarity index 100%
rename from include/asm-arm/arch-mxc/entry-macro.S
rename to arch/arm/plat-mxc/include/mach/entry-macro.S
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
new file mode 100644
index 0000000..65eedc0
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_GPIO_H__
+#define __ASM_ARCH_MXC_GPIO_H__
+
+#include <mach/hardware.h>
+#include <asm-generic/gpio.h>
+
+/* use gpiolib dispatchers */
+#define gpio_get_value		__gpio_get_value
+#define gpio_set_value		__gpio_set_value
+#define gpio_cansleep		__gpio_cansleep
+
+#define gpio_to_irq(gpio)	(MXC_MAX_INT_LINES + (gpio))
+#define irq_to_gpio(irq)	((irq) - MXC_MAX_INT_LINES)
+
+struct mxc_gpio_port {
+	void __iomem *base;
+	int irq;
+	int virtual_irq_start;
+	struct gpio_chip chip;
+};
+
+int mxc_gpio_init(struct mxc_gpio_port*, int);
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
new file mode 100644
index 0000000..3caadeed
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#define __ASM_ARCH_MXC_HARDWARE_H__
+
+#include <asm/sizes.h>
+
+#ifdef CONFIG_ARCH_MX3
+# include <mach/mx31.h>
+#endif
+
+#ifdef CONFIG_ARCH_MX2
+# ifdef CONFIG_MACH_MX27
+#  include <mach/mx27.h>
+# endif
+#endif
+
+#include <mach/mxc.h>
+
+#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/include/asm-arm/arch-mxc/iim.h b/arch/arm/plat-mxc/include/mach/iim.h
similarity index 100%
rename from include/asm-arm/arch-mxc/iim.h
rename to arch/arm/plat-mxc/include/mach/iim.h
diff --git a/include/asm-arm/arch-mxc/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h
similarity index 100%
rename from include/asm-arm/arch-mxc/imx-uart.h
rename to arch/arm/plat-mxc/include/mach/imx-uart.h
diff --git a/include/asm-arm/arch-mxc/io.h b/arch/arm/plat-mxc/include/mach/io.h
similarity index 100%
rename from include/asm-arm/arch-mxc/io.h
rename to arch/arm/plat-mxc/include/mach/io.h
diff --git a/include/asm-arm/arch-mxc/iomux-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
similarity index 100%
rename from include/asm-arm/arch-mxc/iomux-mx1-mx2.h
rename to arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
diff --git a/include/asm-arm/arch-mxc/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
similarity index 100%
rename from include/asm-arm/arch-mxc/iomux-mx3.h
rename to arch/arm/plat-mxc/include/mach/iomux-mx3.h
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
new file mode 100644
index 0000000..228c4f6
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -0,0 +1,16 @@
+/*
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_IRQS_H__
+#define __ASM_ARCH_MXC_IRQS_H__
+
+#include <mach/hardware.h>
+
+#endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
new file mode 100644
index 0000000..d7a8d3eb
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_MEMORY_H__
+#define __ASM_ARCH_MXC_MEMORY_H__
+
+#include <mach/hardware.h>
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * This macro is used to translate the virtual address to an address
+ * suitable to be passed to set_dma_addr()
+ */
+#define __virt_to_bus(a)	__virt_to_phys(a)
+
+/*
+ * Used to convert an address for DMA operations to an address that the
+ * kernel can use.
+ */
+#define __bus_to_virt(a)	__phys_to_virt(a)
+
+#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/include/asm-arm/arch-mxc/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
similarity index 100%
rename from include/asm-arm/arch-mxc/mx27.h
rename to arch/arm/plat-mxc/include/mach/mx27.h
diff --git a/include/asm-arm/arch-mxc/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
similarity index 100%
rename from include/asm-arm/arch-mxc/mx31.h
rename to arch/arm/plat-mxc/include/mach/mx31.h
diff --git a/include/asm-arm/arch-mxc/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
similarity index 100%
rename from include/asm-arm/arch-mxc/mxc.h
rename to arch/arm/plat-mxc/include/mach/mxc.h
diff --git a/arch/arm/plat-mxc/include/mach/mxc_timer.h b/arch/arm/plat-mxc/include/mach/mxc_timer.h
new file mode 100644
index 0000000..130aebf
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mxc_timer.h
@@ -0,0 +1,158 @@
+/*
+ * mxc_timer.h
+ *
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
+#ifndef __PLAT_MXC_TIMER_H
+#define __PLAT_MXC_TIMER_H
+
+#include <linux/clk.h>
+#include <mach/hardware.h>
+
+#ifdef CONFIG_ARCH_IMX
+#define TIMER_BASE		IO_ADDRESS(TIM1_BASE_ADDR)
+#define TIMER_INTERRUPT		TIM1_INT
+
+#define TCTL_VAL		TCTL_CLK_PCLK1
+#define TCTL_IRQEN		(1<<4)
+#define TCTL_FRR		(1<<8)
+#define TCTL_CLK_PCLK1		(1<<1)
+#define TCTL_CLK_PCLK1_4	(2<<1)
+#define TCTL_CLK_TIN		(3<<1)
+#define TCTL_CLK_32		(4<<1)
+
+#define MXC_TCTL   0x00
+#define MXC_TPRER  0x04
+#define MXC_TCMP   0x08
+#define MXC_TCR    0x0c
+#define MXC_TCN    0x10
+#define MXC_TSTAT  0x14
+#define TSTAT_CAPT		(1<<1)
+#define TSTAT_COMP		(1<<0)
+
+static inline void gpt_irq_disable(void)
+{
+	unsigned int tmp;
+
+	tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
+	__raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
+}
+
+static inline void gpt_irq_enable(void)
+{
+	__raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
+				TIMER_BASE + MXC_TCTL);
+}
+
+static void gpt_irq_acknowledge(void)
+{
+	__raw_writel(0, TIMER_BASE + MXC_TSTAT);
+}
+#endif /* CONFIG_ARCH_IMX */
+
+#ifdef CONFIG_ARCH_MX2
+#define TIMER_BASE		IO_ADDRESS(GPT1_BASE_ADDR)
+#define TIMER_INTERRUPT		MXC_INT_GPT1
+
+#define MXC_TCTL   0x00
+#define TCTL_VAL		TCTL_CLK_PCLK1
+#define TCTL_CLK_PCLK1		(1<<1)
+#define TCTL_CLK_PCLK1_4	(2<<1)
+#define TCTL_IRQEN		(1<<4)
+#define TCTL_FRR		(1<<8)
+#define MXC_TPRER  0x04
+#define MXC_TCMP   0x08
+#define MXC_TCR    0x0c
+#define MXC_TCN    0x10
+#define MXC_TSTAT  0x14
+#define TSTAT_CAPT		(1<<1)
+#define TSTAT_COMP		(1<<0)
+
+static inline void gpt_irq_disable(void)
+{
+	unsigned int tmp;
+
+	tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
+	__raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
+}
+
+static inline void gpt_irq_enable(void)
+{
+	__raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
+				TIMER_BASE + MXC_TCTL);
+}
+
+static void gpt_irq_acknowledge(void)
+{
+	__raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT);
+}
+#endif /* CONFIG_ARCH_MX2 */
+
+#ifdef CONFIG_ARCH_MX3
+#define TIMER_BASE		IO_ADDRESS(GPT1_BASE_ADDR)
+#define TIMER_INTERRUPT		MXC_INT_GPT
+
+#define MXC_TCTL   0x00
+#define TCTL_VAL		(TCTL_CLK_IPG | TCTL_WAITEN)
+#define TCTL_CLK_IPG		(1<<6)
+#define TCTL_FRR		(1<<9)
+#define TCTL_WAITEN		(1<<3)
+
+#define MXC_TPRER  0x04
+#define MXC_TSTAT  0x08
+#define TSTAT_OF1		(1<<0)
+#define TSTAT_OF2		(1<<1)
+#define TSTAT_OF3		(1<<2)
+#define TSTAT_IF1		(1<<3)
+#define TSTAT_IF2		(1<<4)
+#define TSTAT_ROV		(1<<5)
+#define MXC_IR     0x0c
+#define MXC_TCMP   0x10
+#define MXC_TCMP2  0x14
+#define MXC_TCMP3  0x18
+#define MXC_TCR    0x1c
+#define MXC_TCN    0x24
+
+static inline void gpt_irq_disable(void)
+{
+	__raw_writel(0, TIMER_BASE + MXC_IR);
+}
+
+static inline void gpt_irq_enable(void)
+{
+	__raw_writel(1<<0, TIMER_BASE + MXC_IR);
+}
+
+static inline void gpt_irq_acknowledge(void)
+{
+	__raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT);
+}
+#endif /* CONFIG_ARCH_MX3 */
+
+#define TCTL_SWR		(1<<15)
+#define TCTL_CC			(1<<10)
+#define TCTL_OM			(1<<9)
+#define TCTL_CAP_RIS		(1<<6)
+#define TCTL_CAP_FAL		(2<<6)
+#define TCTL_CAP_RIS_FAL	(3<<6)
+#define TCTL_CAP_ENA		(1<<5)
+#define TCTL_TEN		(1<<0)
+
+#endif
diff --git a/include/asm-arm/arch-mxc/system.h b/arch/arm/plat-mxc/include/mach/system.h
similarity index 100%
rename from include/asm-arm/arch-mxc/system.h
rename to arch/arm/plat-mxc/include/mach/system.h
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
new file mode 100644
index 0000000..0b0af025
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ *  Copyright (C) 1999 ARM Limited
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MXC_TIMEX_H__
+#define __ASM_ARCH_MXC_TIMEX_H__
+
+#include <mach/hardware.h>	/* for CLOCK_TICK_RATE */
+
+#endif				/* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
new file mode 100644
index 0000000..de6fe03
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -0,0 +1,78 @@
+/*
+ *  arch/arm/plat-mxc/include/mach/uncompress.h
+ *
+ *
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__
+#define __ASM_ARCH_MXC_UNCOMPRESS_H__
+
+#define __MXC_BOOT_UNCOMPRESS
+
+#include <mach/hardware.h>
+
+#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+
+#define USR2 0x98
+#define USR2_TXFE (1<<14)
+#define TXR  0x40
+#define UCR1 0x80
+#define UCR1_UARTEN 1
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  We search for the first enabled
+ * port in the most probable order.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+
+static void putc(int ch)
+{
+	static unsigned long serial_port = 0;
+
+	if (unlikely(serial_port == 0)) {
+		do {
+			serial_port = UART1_BASE_ADDR;
+			if (UART(UCR1) & UCR1_UARTEN)
+				break;
+			serial_port = UART2_BASE_ADDR;
+			if (UART(UCR1) & UCR1_UARTEN)
+				break;
+			return;
+		} while (0);
+	}
+
+	while (!(UART(USR2) & USR2_TXFE))
+		barrier();
+
+	UART(TXR) = ch;
+}
+
+#define flush() do { } while (0)
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
+
+#endif				/* __ASM_ARCH_MXC_UNCOMPRESS_H__ */
diff --git a/include/asm-arm/arch-mxc/vmalloc.h b/arch/arm/plat-mxc/include/mach/vmalloc.h
similarity index 100%
rename from include/asm-arm/arch-mxc/vmalloc.h
rename to arch/arm/plat-mxc/include/mach/vmalloc.h
diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c
index 1204456..d97387a 100644
--- a/arch/arm/plat-mxc/iomux-mx1-mx2.c
+++ b/arch/arm/plat-mxc/iomux-mx1-mx2.c
@@ -30,9 +30,9 @@
 #include <linux/string.h>
 #include <linux/gpio.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/map.h>
-#include <asm/arch/iomux-mx1-mx2.h>
+#include <mach/iomux-mx1-mx2.h>
 
 void mxc_gpio_mode(int gpio_mode)
 {
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 1fbe01d..1053b66 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -19,7 +19,7 @@
 
 #include <linux/irq.h>
 #include <asm/io.h>
-#include <asm/arch/common.h>
+#include <mach/common.h>
 
 #define AVIC_BASE		IO_ADDRESS(AVIC_BASE_ADDR)
 #define AVIC_INTCNTL		(AVIC_BASE + 0x00)	/* int control reg */
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index be9680a..fd28f51 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -26,10 +26,10 @@
 #include <linux/clockchips.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/time.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mxc_timer.h>
+#include <mach/common.h>
+#include <mach/mxc_timer.h>
 
 static struct clock_event_device clockevent_mxc;
 static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index c2e741d..23a0705 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -26,7 +26,7 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 6a95529..f4dff42 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -19,20 +19,20 @@
 #include <linux/serial_reg.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
-#include <asm/arch/control.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
+#include <mach/common.h>
+#include <mach/board.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/sdrc.h"
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index 3c8ef1a..ae1de30 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -21,7 +21,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index 7228ef8..5b73bb2 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -13,11 +13,11 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 
 /* Many OMAP development platforms reuse the same "debug board"; these
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index a47695c3..9422dee 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -13,13 +13,13 @@
 #include <linux/leds.h>
 
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
 
 
 /* Many OMAP development platforms reuse the same "debug board"; these
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 9b4240b..187e3d8 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -14,17 +14,17 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/menelaus.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
+#include <mach/menelaus.h>
+#include <mach/mcbsp.h>
 
 #if	defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 69450d6..a63b644 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -28,10 +28,10 @@
 #include <linux/io.h>
 
 #include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 
-#include <asm/arch/tc.h>
+#include <mach/tc.h>
 
 #undef DEBUG
 
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 30b6f2c..743a4ab 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -32,10 +32,10 @@
 #include <linux/list.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/dmtimer.h>
+#include <mach/hardware.h>
+#include <mach/dmtimer.h>
 #include <asm/io.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 /* register offsets */
 #define _OMAP_TIMER_ID_OFFSET		0x00
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index b0b3c54..17a92a3 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -28,13 +28,13 @@
 #include <linux/platform_device.h>
 #include <linux/bootmem.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/omapfb.h>
+#include <mach/board.h>
+#include <mach/sram.h>
+#include <mach/omapfb.h>
 
 #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
 
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 7112b5db..3e76ee2 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -18,10 +18,10 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/gpio.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
 #include <asm/mach/irq.h>
 
 #include <asm/io.h>
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 647ed59..0e6d147 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -26,7 +26,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 #define OMAP_I2C_SIZE		0x3f
 #define OMAP1_I2C_BASE		0xfffb3800
diff --git a/arch/arm/plat-omap/include/mach/aic23.h b/arch/arm/plat-omap/include/mach/aic23.h
new file mode 100644
index 0000000..5ccedac
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/aic23.h
@@ -0,0 +1,116 @@
+/*
+ * arch/arm/plat-omap/include/mach/aic23.h
+ *
+ * Hardware definitions for TI TLV320AIC23 audio codec
+ *
+ * Copyright (C) 2002 RidgeRun, Inc.
+ * Author: Steve Johnson
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_AIC23_H
+#define __ASM_ARCH_AIC23_H
+
+// Codec TLV320AIC23
+#define LEFT_LINE_VOLUME_ADDR		0x00
+#define RIGHT_LINE_VOLUME_ADDR		0x01
+#define LEFT_CHANNEL_VOLUME_ADDR	0x02
+#define RIGHT_CHANNEL_VOLUME_ADDR	0x03
+#define ANALOG_AUDIO_CONTROL_ADDR	0x04
+#define DIGITAL_AUDIO_CONTROL_ADDR	0x05
+#define POWER_DOWN_CONTROL_ADDR		0x06
+#define DIGITAL_AUDIO_FORMAT_ADDR	0x07
+#define SAMPLE_RATE_CONTROL_ADDR	0x08
+#define DIGITAL_INTERFACE_ACT_ADDR	0x09
+#define RESET_CONTROL_ADDR		0x0F
+
+// Left (right) line input volume control register
+#define LRS_ENABLED			0x0100
+#define LIM_MUTED			0x0080
+#define LIV_DEFAULT			0x0017
+#define LIV_MAX				0x001f
+#define LIV_MIN				0x0000
+
+// Left (right) channel headphone volume control register
+#define LZC_ON				0x0080
+#define LHV_DEFAULT			0x0079
+#define LHV_MAX				0x007f
+#define LHV_MIN				0x0000
+
+// Analog audio path control register
+#define STA_REG(x)			((x)<<6)
+#define STE_ENABLED			0x0020
+#define DAC_SELECTED			0x0010
+#define BYPASS_ON			0x0008
+#define INSEL_MIC			0x0004
+#define MICM_MUTED			0x0002
+#define MICB_20DB			0x0001
+
+// Digital audio path control register
+#define DACM_MUTE			0x0008
+#define DEEMP_32K			0x0002
+#define DEEMP_44K			0x0004
+#define DEEMP_48K			0x0006
+#define ADCHP_ON			0x0001
+
+// Power control down register
+#define DEVICE_POWER_OFF	  	0x0080
+#define CLK_OFF				0x0040
+#define OSC_OFF				0x0020
+#define OUT_OFF				0x0010
+#define DAC_OFF				0x0008
+#define ADC_OFF				0x0004
+#define MIC_OFF				0x0002
+#define LINE_OFF			0x0001
+
+// Digital audio interface register
+#define MS_MASTER			0x0040
+#define LRSWAP_ON			0x0020
+#define LRP_ON				0x0010
+#define IWL_16				0x0000
+#define IWL_20				0x0004
+#define IWL_24				0x0008
+#define IWL_32				0x000C
+#define FOR_I2S				0x0002
+#define FOR_DSP				0x0003
+
+// Sample rate control register
+#define CLKOUT_HALF			0x0080
+#define CLKIN_HALF			0x0040
+#define BOSR_384fs			0x0002 // BOSR_272fs when in USB mode
+#define USB_CLK_ON			0x0001
+#define SR_MASK                         0xf
+#define CLKOUT_SHIFT                    7
+#define CLKIN_SHIFT                     6
+#define SR_SHIFT                        2
+#define BOSR_SHIFT                      1
+
+// Digital interface register
+#define ACT_ON				0x0001
+
+#define TLV320AIC23ID1                  (0x1a)	// cs low
+#define TLV320AIC23ID2                  (0x1b)	// cs high
+
+void aic23_power_up(void);
+void aic23_power_down(void);
+
+#endif /* __ASM_ARCH_AIC23_H */
diff --git a/include/asm-arm/arch-omap/blizzard.h b/arch/arm/plat-omap/include/mach/blizzard.h
similarity index 100%
rename from include/asm-arm/arch-omap/blizzard.h
rename to arch/arm/plat-omap/include/mach/blizzard.h
diff --git a/arch/arm/plat-omap/include/mach/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h
new file mode 100644
index 0000000..cf1dc02
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-2430sdp.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-2430sdp.h
+ *
+ * Hardware definitions for TI OMAP2430 SDP board.
+ *
+ * Based on board-h4.h by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_2430SDP_H
+#define __ASM_ARCH_OMAP_2430SDP_H
+
+/* Placeholder for 2430SDP specific defines */
+#define OMAP24XX_ETHR_START		 0x08000300
+#define OMAP24XX_ETHR_GPIO_IRQ		149
+#define SDP2430_CS0_BASE		0x04000000
+
+#define TWL4030_IRQNUM			INT_24XX_SYS_NIRQ
+
+#endif /* __ASM_ARCH_OMAP_2430SDP_H */
diff --git a/arch/arm/plat-omap/include/mach/board-ams-delta.h b/arch/arm/plat-omap/include/mach/board-ams-delta.h
new file mode 100644
index 0000000..51b102d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-ams-delta.h
@@ -0,0 +1,76 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-ams-delta.h
+ *
+ * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H
+#define __ASM_ARCH_OMAP_AMS_DELTA_H
+
+#if defined (CONFIG_MACH_AMS_DELTA)
+
+#define AMS_DELTA_LATCH1_PHYS		0x01000000
+#define AMS_DELTA_LATCH1_VIRT		0xEA000000
+#define AMS_DELTA_MODEM_PHYS		0x04000000
+#define AMS_DELTA_MODEM_VIRT		0xEB000000
+#define AMS_DELTA_LATCH2_PHYS		0x08000000
+#define AMS_DELTA_LATCH2_VIRT		0xEC000000
+
+#define AMS_DELTA_LATCH1_LED_CAMERA	0x01
+#define AMS_DELTA_LATCH1_LED_ADVERT	0x02
+#define AMS_DELTA_LATCH1_LED_EMAIL	0x04
+#define AMS_DELTA_LATCH1_LED_HANDSFREE	0x08
+#define AMS_DELTA_LATCH1_LED_VOICEMAIL	0x10
+#define AMS_DELTA_LATCH1_LED_VOICE	0x20
+
+#define AMS_DELTA_LATCH2_LCD_VBLEN	0x0001
+#define AMS_DELTA_LATCH2_LCD_NDISP	0x0002
+#define AMS_DELTA_LATCH2_NAND_NCE	0x0004
+#define AMS_DELTA_LATCH2_NAND_NRE	0x0008
+#define AMS_DELTA_LATCH2_NAND_NWP	0x0010
+#define AMS_DELTA_LATCH2_NAND_NWE	0x0020
+#define AMS_DELTA_LATCH2_NAND_ALE	0x0040
+#define AMS_DELTA_LATCH2_NAND_CLE	0x0080
+#define AMD_DELTA_LATCH2_KEYBRD_PWR	0x0100
+#define AMD_DELTA_LATCH2_KEYBRD_DATA	0x0200
+#define AMD_DELTA_LATCH2_SCARD_RSTIN	0x0400
+#define AMD_DELTA_LATCH2_SCARD_CMDVCC	0x0800
+#define AMS_DELTA_LATCH2_MODEM_NRESET	0x1000
+#define AMS_DELTA_LATCH2_MODEM_CODEC	0x2000
+
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA	0
+#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK	1
+#define AMS_DELTA_GPIO_PIN_MODEM_IRQ	2
+#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH	4
+#define AMS_DELTA_GPIO_PIN_SCARD_NOFF	6
+#define AMS_DELTA_GPIO_PIN_SCARD_IO	7
+#define AMS_DELTA_GPIO_PIN_CONFIG	11
+#define AMS_DELTA_GPIO_PIN_NAND_RB	12
+
+#ifndef __ASSEMBLY__
+void ams_delta_latch1_write(u8 mask, u8 value);
+void ams_delta_latch2_write(u16 mask, u16 value);
+#endif
+
+#endif /* CONFIG_MACH_AMS_DELTA */
+
+#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */
diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h
new file mode 100644
index 0000000..d6f2a8e
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-apollon.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-apollon.h
+ *
+ * Hardware definitions for Samsung OMAP24XX Apollon board.
+ *
+ * Initial creation by Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_APOLLON_H
+#define __ASM_ARCH_OMAP_APOLLON_H
+
+extern void apollon_mmc_init(void);
+
+/* Placeholder for APOLLON specific defines */
+#define APOLLON_ETHR_GPIO_IRQ		74
+
+#endif /*  __ASM_ARCH_OMAP_APOLLON_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-fsample.h b/arch/arm/plat-omap/include/mach/board-fsample.h
new file mode 100644
index 0000000..cb3c5ae
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-fsample.h
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-fsample.h
+ *
+ * Board-specific goodies for TI F-Sample.
+ *
+ * Copyright (C) 2006 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_FSAMPLE_H
+#define __ASM_ARCH_OMAP_FSAMPLE_H
+
+/* fsample is pretty close to p2-sample */
+#include <mach/board-perseus2.h>
+
+#define fsample_cpld_read(reg) __raw_readb(reg)
+#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
+
+#define FSAMPLE_CPLD_BASE    0xE8100000
+#define FSAMPLE_CPLD_SIZE    SZ_4K
+#define FSAMPLE_CPLD_START   0x05080000
+
+#define FSAMPLE_CPLD_REG_A   (FSAMPLE_CPLD_BASE + 0x00)
+#define FSAMPLE_CPLD_SWITCH  (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_UART    (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_REG_B   (FSAMPLE_CPLD_BASE + 0x04)
+#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
+#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
+
+#define FSAMPLE_CPLD_BIT_BT_RESET         0
+#define FSAMPLE_CPLD_BIT_LCD_RESET        1
+#define FSAMPLE_CPLD_BIT_CAM_PWDN         2
+#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE   3
+#define FSAMPLE_CPLD_BIT_SD_MMC_EN        4
+#define FSAMPLE_CPLD_BIT_aGPS_PWREN       5
+#define FSAMPLE_CPLD_BIT_BACKLIGHT        6
+#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET    7
+#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N    8
+#define FSAMPLE_CPLD_BIT_OTG_RESET        9
+
+#define fsample_cpld_set(bit) \
+    fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
+
+#define fsample_cpld_clear(bit) \
+    fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/board-h2.h b/arch/arm/plat-omap/include/mach/board-h2.h
new file mode 100644
index 0000000..2a050e9
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-h2.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-h2.h
+ *
+ * Hardware definitions for TI OMAP1610 H2 board.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_H2_H
+#define __ASM_ARCH_OMAP_H2_H
+
+/* Placeholder for H2 specific defines */
+
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define OMAP1610_ETHR_START		0x04000300
+
+extern void h2_mmc_init(void);
+extern void h2_mmc_slot_cover_handler(void *arg, int state);
+
+#endif /*  __ASM_ARCH_OMAP_H2_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-h3.h b/arch/arm/plat-omap/include/mach/board-h3.h
new file mode 100644
index 0000000..14909dc
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-h3.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-h3.h
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_H3_H
+#define __ASM_ARCH_OMAP_H3_H
+
+/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
+#define OMAP1710_ETHR_START		0x04000300
+
+extern void h3_mmc_init(void);
+extern void h3_mmc_slot_cover_handler(void *arg, int state);
+
+#endif /*  __ASM_ARCH_OMAP_H3_H */
diff --git a/arch/arm/plat-omap/include/mach/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h
new file mode 100644
index 0000000..1470cd3
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-h4.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-h4.h
+ *
+ * Hardware definitions for TI OMAP1610 H4 board.
+ *
+ * Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_H4_H
+#define __ASM_ARCH_OMAP_H4_H
+
+/* Placeholder for H4 specific defines */
+#define OMAP24XX_ETHR_GPIO_IRQ		92
+#endif /*  __ASM_ARCH_OMAP_H4_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-innovator.h b/arch/arm/plat-omap/include/mach/board-innovator.h
new file mode 100644
index 0000000..5ae3e79
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-innovator.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-innovator.h
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_INNOVATOR_H
+#define __ASM_ARCH_OMAP_INNOVATOR_H
+
+#if defined (CONFIG_ARCH_OMAP15XX)
+
+#ifndef OMAP_SDRAM_DEVICE
+#define OMAP_SDRAM_DEVICE			D256M_1X16_4B
+#endif
+
+#define OMAP1510P1_IMIF_PRI_VALUE		0x00
+#define OMAP1510P1_EMIFS_PRI_VALUE		0x00
+#define OMAP1510P1_EMIFF_PRI_VALUE		0x00
+
+#ifndef __ASSEMBLY__
+void fpga_write(unsigned char val, int reg);
+unsigned char fpga_read(int reg);
+#endif
+
+#endif /* CONFIG_ARCH_OMAP15XX */
+
+#if defined (CONFIG_ARCH_OMAP16XX)
+
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define INNOVATOR1610_ETHR_START	0x04000300
+
+#endif /* CONFIG_ARCH_OMAP1610 */
+#endif /* __ASM_ARCH_OMAP_INNOVATOR_H */
diff --git a/arch/arm/plat-omap/include/mach/board-nokia.h b/arch/arm/plat-omap/include/mach/board-nokia.h
new file mode 100644
index 0000000..2abbe00
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-nokia.h
@@ -0,0 +1,54 @@
+/*
+ *  arch/arm/plat-omap/include/mach/board-nokia.h
+ *
+ *  Information structures for Nokia-specific board config data
+ *
+ *  Copyright (C) 2005	Nokia Corporation
+ */
+
+#ifndef _OMAP_BOARD_NOKIA_H
+#define _OMAP_BOARD_NOKIA_H
+
+#include <linux/types.h>
+
+#define OMAP_TAG_NOKIA_BT	0x4e01
+#define OMAP_TAG_WLAN_CX3110X	0x4e02
+#define OMAP_TAG_CBUS		0x4e03
+#define OMAP_TAG_EM_ASIC_BB5	0x4e04
+
+
+#define BT_CHIP_CSR		1
+#define BT_CHIP_TI		2
+
+#define BT_SYSCLK_12		1
+#define BT_SYSCLK_38_4		2
+
+struct omap_bluetooth_config {
+	u8    chip_type;
+	u8    bt_wakeup_gpio;
+	u8    host_wakeup_gpio;
+	u8    reset_gpio;
+	u8    bt_uart;
+	u8    bd_addr[6];
+	u8    bt_sysclk;
+};
+
+struct omap_wlan_cx3110x_config {
+	u8  chip_type;
+	s16 power_gpio;
+	s16 irq_gpio;
+	s16 spi_cs_gpio;
+};
+
+struct omap_cbus_config {
+	s16 clk_gpio;
+	s16 dat_gpio;
+	s16 sel_gpio;
+};
+
+struct omap_em_asic_bb5_config {
+	s16 retu_irq_gpio;
+	s16 tahvo_irq_gpio;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/board-osk.h b/arch/arm/plat-omap/include/mach/board-osk.h
new file mode 100644
index 0000000..3850cb1
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-osk.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-osk.h
+ *
+ * Hardware definitions for TI OMAP5912 OSK board.
+ *
+ * Written by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_OSK_H
+#define __ASM_ARCH_OMAP_OSK_H
+
+/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
+#define OMAP_OSK_ETHR_START		0x04800300
+
+/* TPS65010 has four GPIOs.  nPG and LED2 can be treated like GPIOs with
+ * alternate pin configurations for hardware-controlled blinking.
+ */
+#define OSK_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+#	define OSK_TPS_GPIO_USB_PWR_EN	(OSK_TPS_GPIO_BASE + 0)
+#	define OSK_TPS_GPIO_LED_D3	(OSK_TPS_GPIO_BASE + 1)
+#	define OSK_TPS_GPIO_LAN_RESET	(OSK_TPS_GPIO_BASE + 2)
+#	define OSK_TPS_GPIO_DSP_PWR_EN	(OSK_TPS_GPIO_BASE + 3)
+#	define OSK_TPS_GPIO_LED_D9	(OSK_TPS_GPIO_BASE + 4)
+#	define OSK_TPS_GPIO_LED_D2	(OSK_TPS_GPIO_BASE + 5)
+
+#endif /*  __ASM_ARCH_OMAP_OSK_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-palmte.h b/arch/arm/plat-omap/include/mach/board-palmte.h
new file mode 100644
index 0000000..6906cde
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-palmte.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-palmte.h
+ *
+ * Hardware definitions for the Palm Tungsten E device.
+ *
+ * Maintainters :	http://palmtelinux.sf.net
+ *			palmtelinux-developpers@lists.sf.net
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_BOARD_PALMTE_H
+#define __OMAP_BOARD_PALMTE_H
+
+#define PALMTE_USBDETECT_GPIO	0
+#define PALMTE_USB_OR_DC_GPIO	1
+#define PALMTE_TSC_GPIO		4
+#define PALMTE_PINTDAV_GPIO	6
+#define PALMTE_MMC_WP_GPIO	8
+#define PALMTE_MMC_POWER_GPIO	9
+#define PALMTE_HDQ_GPIO		11
+#define PALMTE_HEADPHONES_GPIO	14
+#define PALMTE_SPEAKER_GPIO	15
+#define PALMTE_DC_GPIO		OMAP_MPUIO(2)
+#define PALMTE_MMC_SWITCH_GPIO	OMAP_MPUIO(4)
+#define PALMTE_MMC1_GPIO	OMAP_MPUIO(6)
+#define PALMTE_MMC2_GPIO	OMAP_MPUIO(7)
+#define PALMTE_MMC3_GPIO	OMAP_MPUIO(11)
+
+#endif	/* __OMAP_BOARD_PALMTE_H */
diff --git a/arch/arm/plat-omap/include/mach/board-palmtt.h b/arch/arm/plat-omap/include/mach/board-palmtt.h
new file mode 100644
index 0000000..e79f382
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-palmtt.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-palmte.h
+ *
+ * Hardware definitions for the Palm Tungsten|T device.
+ *
+ * Maintainters :	Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_BOARD_PALMTT_H
+#define __OMAP_BOARD_PALMTT_H
+
+#define PALMTT_USBDETECT_GPIO	0
+#define PALMTT_CABLE_GPIO	1
+#define PALMTT_LED_GPIO		3
+#define PALMTT_PENIRQ_GPIO	6
+#define PALMTT_MMC_WP_GPIO	8
+#define PALMTT_HDQ_GPIO		11
+
+#endif	/* __OMAP_BOARD_PALMTT_H */
diff --git a/arch/arm/plat-omap/include/mach/board-palmz71.h b/arch/arm/plat-omap/include/mach/board-palmz71.h
new file mode 100644
index 0000000..b1d7d57
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-palmz71.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-palmz71.h
+ *
+ * Hardware definitions for the Palm Zire71 device.
+ *
+ * Maintainters :	Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_BOARD_PALMZ71_H
+#define __OMAP_BOARD_PALMZ71_H
+
+#define PALMZ71_USBDETECT_GPIO	0
+#define PALMZ71_PENIRQ_GPIO	6
+#define PALMZ71_MMC_WP_GPIO	8
+#define PALMZ71_HDQ_GPIO 	11
+
+#define PALMZ71_HOTSYNC_GPIO	OMAP_MPUIO(1)
+#define PALMZ71_CABLE_GPIO	OMAP_MPUIO(2)
+#define PALMZ71_SLIDER_GPIO	OMAP_MPUIO(3)
+#define PALMZ71_MMC_IN_GPIO	OMAP_MPUIO(4)
+
+#endif	/* __OMAP_BOARD_PALMZ71_H */
diff --git a/arch/arm/plat-omap/include/mach/board-perseus2.h b/arch/arm/plat-omap/include/mach/board-perseus2.h
new file mode 100644
index 0000000..c06c3d7
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-perseus2.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/plat-omap/include/mach/board-perseus2.h
+ *
+ *  Copyright 2003 by Texas Instruments Incorporated
+ *    OMAP730 / Perseus2 support by Jean Pihet
+ *
+ * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com)
+ * Author: RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_PERSEUS2_H
+#define __ASM_ARCH_OMAP_PERSEUS2_H
+
+#include <mach/fpga.h>
+
+#ifndef OMAP_SDRAM_DEVICE
+#define OMAP_SDRAM_DEVICE		D256M_1X16_4B
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-omap/board-sx1.h b/arch/arm/plat-omap/include/mach/board-sx1.h
similarity index 100%
rename from include/asm-arm/arch-omap/board-sx1.h
rename to arch/arm/plat-omap/include/mach/board-sx1.h
diff --git a/include/asm-arm/arch-omap/board-voiceblue.h b/arch/arm/plat-omap/include/mach/board-voiceblue.h
similarity index 100%
rename from include/asm-arm/arch-omap/board-voiceblue.h
rename to arch/arm/plat-omap/include/mach/board-voiceblue.h
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
new file mode 100644
index 0000000..5444564
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -0,0 +1,186 @@
+/*
+ *  arch/arm/plat-omap/include/mach/board.h
+ *
+ *  Information structures for board-specific data
+ *
+ *  Copyright (C) 2004	Nokia Corporation
+ *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+
+#ifndef _OMAP_BOARD_H
+#define _OMAP_BOARD_H
+
+#include <linux/types.h>
+
+#include <mach/gpio-switch.h>
+
+/* Different peripheral ids */
+#define OMAP_TAG_CLOCK		0x4f01
+#define OMAP_TAG_MMC		0x4f02
+#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
+#define OMAP_TAG_USB		0x4f04
+#define OMAP_TAG_LCD		0x4f05
+#define OMAP_TAG_GPIO_SWITCH	0x4f06
+#define OMAP_TAG_UART		0x4f07
+#define OMAP_TAG_FBMEM		0x4f08
+#define OMAP_TAG_STI_CONSOLE	0x4f09
+#define OMAP_TAG_CAMERA_SENSOR	0x4f0a
+
+#define OMAP_TAG_BOOT_REASON    0x4f80
+#define OMAP_TAG_FLASH_PART	0x4f81
+#define OMAP_TAG_VERSION_STR	0x4f82
+
+struct omap_clock_config {
+	/* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
+	u8 system_clock_type;
+};
+
+struct omap_mmc_conf {
+	unsigned enabled:1;
+	/* nomux means "standard" muxing is wrong on this board, and that
+	 * board-specific code handled it before common init logic.
+	 */
+	unsigned nomux:1;
+	/* switch pin can be for card detect (default) or card cover */
+	unsigned cover:1;
+	/* 4 wire signaling is optional, and is only used for SD/SDIO */
+	unsigned wire4:1;
+	s16 power_pin;
+	s16 switch_pin;
+	s16 wp_pin;
+};
+
+struct omap_mmc_config {
+	struct omap_mmc_conf mmc[2];
+};
+
+struct omap_serial_console_config {
+	u8 console_uart;
+	u32 console_speed;
+};
+
+struct omap_sti_console_config {
+	unsigned enable:1;
+	u8 channel;
+};
+
+struct omap_camera_sensor_config {
+	u16 reset_gpio;
+	int (*power_on)(void * data);
+	int (*power_off)(void * data);
+};
+
+struct omap_usb_config {
+	/* Configure drivers according to the connectors on your board:
+	 *  - "A" connector (rectagular)
+	 *	... for host/OHCI use, set "register_host".
+	 *  - "B" connector (squarish) or "Mini-B"
+	 *	... for device/gadget use, set "register_dev".
+	 *  - "Mini-AB" connector (very similar to Mini-B)
+	 *	... for OTG use as device OR host, initialize "otg"
+	 */
+	unsigned	register_host:1;
+	unsigned	register_dev:1;
+	u8		otg;	/* port number, 1-based:  usb1 == 2 */
+
+	u8		hmc_mode;
+
+	/* implicitly true if otg:  host supports remote wakeup? */
+	u8		rwc;
+
+	/* signaling pins used to talk to transceiver on usbN:
+	 *  0 == usbN unused
+	 *  2 == usb0-only, using internal transceiver
+	 *  3 == 3 wire bidirectional
+	 *  4 == 4 wire bidirectional
+	 *  6 == 6 wire unidirectional (or TLL)
+	 */
+	u8		pins[3];
+};
+
+struct omap_lcd_config {
+	char panel_name[16];
+	char ctrl_name[16];
+	s16  nreset_gpio;
+	u8   data_lines;
+};
+
+struct device;
+struct fb_info;
+struct omap_backlight_config {
+	int default_intensity;
+	int (*set_power)(struct device *dev, int state);
+	int (*check_fb)(struct fb_info *fb);
+};
+
+struct omap_fbmem_config {
+	u32 start;
+	u32 size;
+};
+
+struct omap_pwm_led_platform_data {
+	const char *name;
+	int intensity_timer;
+	int blink_timer;
+	void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
+};
+
+/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */
+struct omap_gpio_switch_config {
+	char name[12];
+	u16 gpio;
+	int flags:4;
+	int type:4;
+	int key_code:24; /* Linux key code */
+};
+
+struct omap_uart_config {
+	/* Bit field of UARTs present; bit 0 --> UART1 */
+	unsigned int enabled_uarts;
+};
+
+
+struct omap_flash_part_config {
+	char part_table[0];
+};
+
+struct omap_boot_reason_config {
+	char reason_str[12];
+};
+
+struct omap_version_config {
+	char component[12];
+	char version[12];
+};
+
+
+#include <mach/board-nokia.h>
+
+struct omap_board_config_entry {
+	u16 tag;
+	u16 len;
+	u8  data[0];
+};
+
+struct omap_board_config_kernel {
+	u16 tag;
+	const void *data;
+};
+
+extern const void *__omap_get_config(u16 tag, size_t len, int nr);
+
+#define omap_get_config(tag, type) \
+	((const type *) __omap_get_config((tag), sizeof(type), 0))
+#define omap_get_nr_config(tag, type, nr) \
+	((const type *) __omap_get_config((tag), sizeof(type), (nr)))
+
+extern const void *omap_get_var_config(u16 tag, size_t *len);
+
+extern struct omap_board_config_kernel *omap_board_config;
+extern int omap_board_config_size;
+
+
+/* for TI reference platforms sharing the same debug card */
+extern int debug_card_init(u32 addr, unsigned gpio);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
new file mode 100644
index 0000000..92f7c72
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -0,0 +1,162 @@
+/*
+ *  arch/arm/plat-omap/include/mach/clock.h
+ *
+ *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_CLOCK_H
+#define __ARCH_ARM_OMAP_CLOCK_H
+
+struct module;
+struct clk;
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+
+struct clksel_rate {
+	u8			div;
+	u32			val;
+	u8			flags;
+};
+
+struct clksel {
+	struct clk		 *parent;
+	const struct clksel_rate *rates;
+};
+
+struct dpll_data {
+	void __iomem		*mult_div1_reg;
+	u32			mult_mask;
+	u32			div1_mask;
+	u16			last_rounded_m;
+	u8			last_rounded_n;
+	unsigned long		last_rounded_rate;
+	unsigned int		rate_tolerance;
+	u16			max_multiplier;
+	u8			max_divider;
+	u32			max_tolerance;
+#  if defined(CONFIG_ARCH_OMAP3)
+	u8			modes;
+	void __iomem		*control_reg;
+	u32			enable_mask;
+	u8			auto_recal_bit;
+	u8			recal_en_bit;
+	u8			recal_st_bit;
+	void __iomem		*autoidle_reg;
+	u32			autoidle_mask;
+	void __iomem		*idlest_reg;
+	u8			idlest_bit;
+#  endif
+};
+
+#endif
+
+struct clk {
+	struct list_head	node;
+	struct module		*owner;
+	const char		*name;
+	int			id;
+	struct clk		*parent;
+	unsigned long		rate;
+	__u32			flags;
+	void __iomem		*enable_reg;
+	__u8			enable_bit;
+	__s8			usecount;
+	void			(*recalc)(struct clk *);
+	int			(*set_rate)(struct clk *, unsigned long);
+	long			(*round_rate)(struct clk *, unsigned long);
+	void			(*init)(struct clk *);
+	int			(*enable)(struct clk *);
+	void			(*disable)(struct clk *);
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	u8			fixed_div;
+	void __iomem		*clksel_reg;
+	u32			clksel_mask;
+	const struct clksel	*clksel;
+	struct dpll_data	*dpll_data;
+#else
+	__u8			rate_offset;
+	__u8			src_offset;
+#endif
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+	struct dentry		*dent;	/* For visible tree hierarchy */
+#endif
+};
+
+struct cpufreq_frequency_table;
+
+struct clk_functions {
+	int		(*clk_enable)(struct clk *clk);
+	void		(*clk_disable)(struct clk *clk);
+	long		(*clk_round_rate)(struct clk *clk, unsigned long rate);
+	int		(*clk_set_rate)(struct clk *clk, unsigned long rate);
+	int		(*clk_set_parent)(struct clk *clk, struct clk *parent);
+	struct clk *	(*clk_get_parent)(struct clk *clk);
+	void		(*clk_allow_idle)(struct clk *clk);
+	void		(*clk_deny_idle)(struct clk *clk);
+	void		(*clk_disable_unused)(struct clk *clk);
+#ifdef CONFIG_CPU_FREQ
+	void		(*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
+#endif
+};
+
+extern unsigned int mpurate;
+
+extern int clk_init(struct clk_functions * custom_clocks);
+extern int clk_register(struct clk *clk);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern void followparent_recalc(struct clk * clk);
+extern void clk_allow_idle(struct clk *clk);
+extern void clk_deny_idle(struct clk *clk);
+extern int clk_get_usecount(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+
+/* Clock flags */
+#define RATE_CKCTL		(1 << 0)	/* Main fixed ratio clocks */
+#define RATE_FIXED		(1 << 1)	/* Fixed clock rate */
+#define RATE_PROPAGATES		(1 << 2)	/* Program children too */
+#define VIRTUAL_CLOCK		(1 << 3)	/* Composite clock from table */
+#define ALWAYS_ENABLED		(1 << 4)	/* Clock cannot be disabled */
+#define ENABLE_REG_32BIT	(1 << 5)	/* Use 32-bit access */
+#define VIRTUAL_IO_ADDRESS	(1 << 6)	/* Clock in virtual address */
+#define CLOCK_IDLE_CONTROL	(1 << 7)
+#define CLOCK_NO_IDLE_PARENT	(1 << 8)
+#define DELAYED_APP		(1 << 9)	/* Delay application of clock */
+#define CONFIG_PARTICIPANT	(1 << 10)	/* Fundamental clock */
+#define ENABLE_ON_INIT		(1 << 11)	/* Enable upon framework init */
+#define INVERT_ENABLE           (1 << 12)       /* 0 enables, 1 disables */
+/* bits 13-20 are currently free */
+#define CLOCK_IN_OMAP310	(1 << 21)
+#define CLOCK_IN_OMAP730	(1 << 22)
+#define CLOCK_IN_OMAP1510	(1 << 23)
+#define CLOCK_IN_OMAP16XX	(1 << 24)
+#define CLOCK_IN_OMAP242X	(1 << 25)
+#define CLOCK_IN_OMAP243X	(1 << 26)
+#define CLOCK_IN_OMAP343X	(1 << 27)	/* clocks common to all 343X */
+#define PARENT_CONTROLS_CLOCK	(1 << 28)
+#define CLOCK_IN_OMAP3430ES1	(1 << 29)	/* 3430ES1 clocks only */
+#define CLOCK_IN_OMAP3430ES2	(1 << 30)	/* 3430ES2 clocks only */
+
+/* Clksel_rate flags */
+#define DEFAULT_RATE		(1 << 0)
+#define RATE_IN_242X		(1 << 1)
+#define RATE_IN_243X		(1 << 2)
+#define RATE_IN_343X		(1 << 3)	/* rates common to all 343X */
+#define RATE_IN_3430ES2		(1 << 4)	/* 3430ES2 rates only */
+
+#define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
+
+
+/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */
+#define CORE_CLK_SRC_32K		0
+#define CORE_CLK_SRC_DPLL		1
+#define CORE_CLK_SRC_DPLL_X2		2
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
new file mode 100644
index 0000000..0609311
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/plat-omap/include/mach/common.h
+ *
+ * Header for code common to all OMAP machines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
+#define __ARCH_ARM_MACH_OMAP_COMMON_H
+
+#include <linux/i2c.h>
+
+struct sys_timer;
+
+extern void omap_map_common_io(void);
+extern struct sys_timer omap_timer;
+extern void omap_serial_init(void);
+#ifdef CONFIG_I2C_OMAP
+extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
+				 struct i2c_board_info const *info,
+				 unsigned len);
+#else
+static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
+				 struct i2c_board_info const *info,
+				 unsigned len)
+{
+	return 0;
+}
+#endif
+
+/* IO bases for various OMAP processors */
+struct omap_globals {
+	void __iomem	*tap;		/* Control module ID code */
+	void __iomem	*sdrc;		/* SDRAM Controller */
+	void __iomem	*sms;		/* SDRAM Memory Scheduler */
+	void __iomem	*ctrl;		/* System Control Module */
+	void __iomem	*prm;		/* Power and Reset Management */
+	void __iomem	*cm;		/* Clock Management */
+};
+
+void omap2_set_globals_242x(void);
+void omap2_set_globals_243x(void);
+void omap2_set_globals_343x(void);
+
+/* These get called from omap2_set_globals_xxxx(), do not call these */
+void omap2_set_globals_memory(struct omap_globals *);
+void omap2_set_globals_control(struct omap_globals *);
+void omap2_set_globals_prcm(struct omap_globals *);
+
+#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
new file mode 100644
index 0000000..e3fd62d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -0,0 +1,189 @@
+#ifndef __ASM_ARCH_CONTROL_H
+#define __ASM_ARCH_CONTROL_H
+
+/*
+ * arch/arm/plat-omap/include/mach/control.h
+ *
+ * OMAP2/3 System Control Module definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+
+#include <mach/io.h>
+
+#define OMAP242X_CTRL_REGADDR(reg)					\
+	(void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg)					\
+	(void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg)					\
+	(void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+
+/*
+ * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
+ * OMAP24XX and OMAP34XX.
+ */
+
+/* Control submodule offsets */
+
+#define OMAP2_CONTROL_INTERFACE		0x000
+#define OMAP2_CONTROL_PADCONFS		0x030
+#define OMAP2_CONTROL_GENERAL		0x270
+#define OMAP343X_CONTROL_MEM_WKUP	0x600
+#define OMAP343X_CONTROL_PADCONFS_WKUP	0xa00
+#define OMAP343X_CONTROL_GENERAL_WKUP	0xa60
+
+/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
+
+#define OMAP2_CONTROL_SYSCONFIG		(OMAP2_CONTROL_INTERFACE + 0x10)
+
+/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */
+#define OMAP2_CONTROL_DEVCONF0		(OMAP2_CONTROL_GENERAL + 0x0004)
+#define OMAP2_CONTROL_MSUSPENDMUX_0	(OMAP2_CONTROL_GENERAL + 0x0020)
+#define OMAP2_CONTROL_MSUSPENDMUX_1	(OMAP2_CONTROL_GENERAL + 0x0024)
+#define OMAP2_CONTROL_MSUSPENDMUX_2	(OMAP2_CONTROL_GENERAL + 0x0028)
+#define OMAP2_CONTROL_MSUSPENDMUX_3	(OMAP2_CONTROL_GENERAL + 0x002c)
+#define OMAP2_CONTROL_MSUSPENDMUX_4	(OMAP2_CONTROL_GENERAL + 0x0030)
+#define OMAP2_CONTROL_MSUSPENDMUX_5	(OMAP2_CONTROL_GENERAL + 0x0034)
+#define OMAP2_CONTROL_SEC_CTRL		(OMAP2_CONTROL_GENERAL + 0x0040)
+#define OMAP2_CONTROL_RPUB_KEY_H_0	(OMAP2_CONTROL_GENERAL + 0x0090)
+#define OMAP2_CONTROL_RPUB_KEY_H_1	(OMAP2_CONTROL_GENERAL + 0x0094)
+#define OMAP2_CONTROL_RPUB_KEY_H_2	(OMAP2_CONTROL_GENERAL + 0x0098)
+#define OMAP2_CONTROL_RPUB_KEY_H_3	(OMAP2_CONTROL_GENERAL + 0x009c)
+
+/* 242x-only CONTROL_GENERAL register offsets */
+#define OMAP242X_CONTROL_DEVCONF	OMAP2_CONTROL_DEVCONF0 /* match TRM */
+#define OMAP242X_CONTROL_OCM_RAM_PERM	(OMAP2_CONTROL_GENERAL + 0x0068)
+
+/* 243x-only CONTROL_GENERAL register offsets */
+/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */
+#define OMAP243X_CONTROL_DEVCONF1	(OMAP2_CONTROL_GENERAL + 0x0078)
+#define OMAP243X_CONTROL_CSIRXFE	(OMAP2_CONTROL_GENERAL + 0x007c)
+#define OMAP243X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
+#define OMAP243X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP243X_CONTROL_IVA2_GEMCFG	(OMAP2_CONTROL_GENERAL + 0x0198)
+
+/* 24xx-only CONTROL_GENERAL register offsets */
+#define OMAP24XX_CONTROL_DEBOBS		(OMAP2_CONTROL_GENERAL + 0x0000)
+#define OMAP24XX_CONTROL_EMU_SUPPORT	(OMAP2_CONTROL_GENERAL + 0x0008)
+#define OMAP24XX_CONTROL_SEC_TEST	(OMAP2_CONTROL_GENERAL + 0x0044)
+#define OMAP24XX_CONTROL_PSA_CTRL	(OMAP2_CONTROL_GENERAL + 0x0048)
+#define OMAP24XX_CONTROL_PSA_CMD	(OMAP2_CONTROL_GENERAL + 0x004c)
+#define OMAP24XX_CONTROL_PSA_VALUE	(OMAP2_CONTROL_GENERAL + 0x0050)
+#define OMAP24XX_CONTROL_SEC_EMU	(OMAP2_CONTROL_GENERAL + 0x0060)
+#define OMAP24XX_CONTROL_SEC_TAP	(OMAP2_CONTROL_GENERAL + 0x0064)
+#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD	(OMAP2_CONTROL_GENERAL + 0x006c)
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD	(OMAP2_CONTROL_GENERAL + 0x0070)
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD	(OMAP2_CONTROL_GENERAL + 0x0074)
+#define OMAP24XX_CONTROL_SEC_STATUS		(OMAP2_CONTROL_GENERAL + 0x0080)
+#define OMAP24XX_CONTROL_SEC_ERR_STATUS		(OMAP2_CONTROL_GENERAL + 0x0084)
+#define OMAP24XX_CONTROL_STATUS			(OMAP2_CONTROL_GENERAL + 0x0088)
+#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS	(OMAP2_CONTROL_GENERAL + 0x008c)
+#define OMAP24XX_CONTROL_RAND_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00a0)
+#define OMAP24XX_CONTROL_RAND_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00a4)
+#define OMAP24XX_CONTROL_RAND_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00a8)
+#define OMAP24XX_CONTROL_RAND_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00ac)
+#define OMAP24XX_CONTROL_CUST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00b0)
+#define OMAP24XX_CONTROL_CUST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00b4)
+#define OMAP24XX_CONTROL_TEST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00c0)
+#define OMAP24XX_CONTROL_TEST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00c4)
+#define OMAP24XX_CONTROL_TEST_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00c8)
+#define OMAP24XX_CONTROL_TEST_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00cc)
+#define OMAP24XX_CONTROL_TEST_KEY_4	(OMAP2_CONTROL_GENERAL + 0x00d0)
+#define OMAP24XX_CONTROL_TEST_KEY_5	(OMAP2_CONTROL_GENERAL + 0x00d4)
+#define OMAP24XX_CONTROL_TEST_KEY_6	(OMAP2_CONTROL_GENERAL + 0x00d8)
+#define OMAP24XX_CONTROL_TEST_KEY_7	(OMAP2_CONTROL_GENERAL + 0x00dc)
+#define OMAP24XX_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e0)
+#define OMAP24XX_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00e4)
+
+/* 34xx-only CONTROL_GENERAL register offsets */
+#define OMAP343X_CONTROL_PADCONF_OFF	(OMAP2_CONTROL_GENERAL + 0x0000)
+#define OMAP343X_CONTROL_MEM_DFTRW0	(OMAP2_CONTROL_GENERAL + 0x0008)
+#define OMAP343X_CONTROL_MEM_DFTRW1	(OMAP2_CONTROL_GENERAL + 0x000c)
+#define OMAP343X_CONTROL_DEVCONF1	(OMAP2_CONTROL_GENERAL + 0x0068)
+#define OMAP343X_CONTROL_CSIRXFE		(OMAP2_CONTROL_GENERAL + 0x006c)
+#define OMAP343X_CONTROL_SEC_STATUS		(OMAP2_CONTROL_GENERAL + 0x0070)
+#define OMAP343X_CONTROL_SEC_ERR_STATUS		(OMAP2_CONTROL_GENERAL + 0x0074)
+#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG	(OMAP2_CONTROL_GENERAL + 0x0078)
+#define OMAP343X_CONTROL_STATUS			(OMAP2_CONTROL_GENERAL + 0x0080)
+#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS	(OMAP2_CONTROL_GENERAL + 0x0084)
+#define OMAP343X_CONTROL_RPUB_KEY_H_4	(OMAP2_CONTROL_GENERAL + 0x00a0)
+#define OMAP343X_CONTROL_RAND_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00a8)
+#define OMAP343X_CONTROL_RAND_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00ac)
+#define OMAP343X_CONTROL_RAND_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00b0)
+#define OMAP343X_CONTROL_RAND_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00b4)
+#define OMAP343X_CONTROL_TEST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00c8)
+#define OMAP343X_CONTROL_TEST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00cc)
+#define OMAP343X_CONTROL_TEST_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00d0)
+#define OMAP343X_CONTROL_TEST_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00d4)
+#define OMAP343X_CONTROL_TEST_KEY_4	(OMAP2_CONTROL_GENERAL + 0x00d8)
+#define OMAP343X_CONTROL_TEST_KEY_5	(OMAP2_CONTROL_GENERAL + 0x00dc)
+#define OMAP343X_CONTROL_TEST_KEY_6	(OMAP2_CONTROL_GENERAL + 0x00e0)
+#define OMAP343X_CONTROL_TEST_KEY_7	(OMAP2_CONTROL_GENERAL + 0x00e4)
+#define OMAP343X_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e8)
+#define OMAP343X_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00ec)
+#define OMAP343X_CONTROL_TEST_KEY_10	(OMAP2_CONTROL_GENERAL + 0x00f0)
+#define OMAP343X_CONTROL_TEST_KEY_11	(OMAP2_CONTROL_GENERAL + 0x00f4)
+#define OMAP343X_CONTROL_TEST_KEY_12	(OMAP2_CONTROL_GENERAL + 0x00f8)
+#define OMAP343X_CONTROL_TEST_KEY_13	(OMAP2_CONTROL_GENERAL + 0x00fc)
+#define OMAP343X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
+#define OMAP343X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
+
+/*
+ * REVISIT: This list of registers is not comprehensive - there are more
+ * that should be added.
+ */
+
+/*
+ * Control module register bit defines - these should eventually go into
+ * their own regbits file.  Some of these will be complicated, depending
+ * on the device type (general-purpose, emulator, test, secure, bad, other)
+ * and the security mode (secure, non-secure, don't care)
+ */
+/* CONTROL_DEVCONF0 bits */
+#define OMAP24XX_USBSTANDBYCTRL		(1 << 15)
+#define OMAP2_MCBSP2_CLKS_MASK		(1 << 6)
+#define OMAP2_MCBSP1_CLKS_MASK		(1 << 2)
+
+/* CONTROL_DEVCONF1 bits */
+#define OMAP2_MCBSP5_CLKS_MASK		(1 << 4) /* > 242x */
+#define OMAP2_MCBSP4_CLKS_MASK		(1 << 2) /* > 242x */
+#define OMAP2_MCBSP3_CLKS_MASK		(1 << 0) /* > 242x */
+
+/* CONTROL_STATUS bits */
+#define OMAP2_DEVICETYPE_MASK		(0x7 << 8)
+#define OMAP2_SYSBOOT_5_MASK		(1 << 5)
+#define OMAP2_SYSBOOT_4_MASK		(1 << 4)
+#define OMAP2_SYSBOOT_3_MASK		(1 << 3)
+#define OMAP2_SYSBOOT_2_MASK		(1 << 2)
+#define OMAP2_SYSBOOT_1_MASK		(1 << 1)
+#define OMAP2_SYSBOOT_0_MASK		(1 << 0)
+
+#ifndef __ASSEMBLY__
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+extern void __iomem *omap_ctrl_base_get(void);
+extern u8 omap_ctrl_readb(u16 offset);
+extern u16 omap_ctrl_readw(u16 offset);
+extern u32 omap_ctrl_readl(u16 offset);
+extern void omap_ctrl_writeb(u8 val, u16 offset);
+extern void omap_ctrl_writew(u16 val, u16 offset);
+extern void omap_ctrl_writel(u32 val, u16 offset);
+#else
+#define omap_ctrl_base_get()		0
+#define omap_ctrl_readb(x)		0
+#define omap_ctrl_readw(x)		0
+#define omap_ctrl_readl(x)		0
+#define omap_ctrl_writeb(x, y)		WARN_ON(1)
+#define omap_ctrl_writew(x, y)		WARN_ON(1)
+#define omap_ctrl_writel(x, y)		WARN_ON(1)
+#endif
+#endif	/* __ASSEMBLY__ */
+
+#endif /* __ASM_ARCH_CONTROL_H */
+
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
new file mode 100644
index 0000000..05aee0e
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -0,0 +1,402 @@
+/*
+ * arch/arm/plat-omap/include/mach/cpu.h
+ *
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_CPU_H
+#define __ASM_ARCH_OMAP_CPU_H
+
+struct omap_chip_id {
+	u8 oc;
+};
+
+#define OMAP_CHIP_INIT(x)	{ .oc = x }
+
+extern unsigned int system_rev;
+
+#define omap2_cpu_rev()		((system_rev >> 12) & 0x0f)
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP1
+#undef MULTI_OMAP2
+#undef OMAP_NAME
+
+#ifdef CONFIG_ARCH_OMAP730
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap730
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap1510
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap16xx
+# endif
+#endif
+#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX))
+# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
+#  error "OMAP1 and OMAP2 can't be selected at the same time"
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2420
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap2420
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2430
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap2430
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP3430
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap3430
+# endif
+#endif
+
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap7xx():	True for OMAP730
+ * cpu_is_omap15xx():	True for OMAP1510, OMAP5910 and OMAP310
+ * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
+ * cpu_is_omap24xx():	True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
+ * cpu_is_omap242x():	True for OMAP2420, OMAP2422, OMAP2423
+ * cpu_is_omap243x():	True for OMAP2430
+ * cpu_is_omap343x():	True for OMAP3430
+ */
+#define GET_OMAP_CLASS	((system_rev >> 24) & 0xff)
+
+#define IS_OMAP_CLASS(class, id)			\
+static inline int is_omap ##class (void)		\
+{							\
+	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
+}
+
+#define GET_OMAP_SUBCLASS	((system_rev >> 20) & 0x0fff)
+
+#define IS_OMAP_SUBCLASS(subclass, id)			\
+static inline int is_omap ##subclass (void)		\
+{							\
+	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
+}
+
+IS_OMAP_CLASS(7xx, 0x07)
+IS_OMAP_CLASS(15xx, 0x15)
+IS_OMAP_CLASS(16xx, 0x16)
+IS_OMAP_CLASS(24xx, 0x24)
+IS_OMAP_CLASS(34xx, 0x34)
+
+IS_OMAP_SUBCLASS(242x, 0x242)
+IS_OMAP_SUBCLASS(243x, 0x243)
+IS_OMAP_SUBCLASS(343x, 0x343)
+
+#define cpu_is_omap7xx()		0
+#define cpu_is_omap15xx()		0
+#define cpu_is_omap16xx()		0
+#define cpu_is_omap24xx()		0
+#define cpu_is_omap242x()		0
+#define cpu_is_omap243x()		0
+#define cpu_is_omap34xx()		0
+#define cpu_is_omap343x()		0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()		is_omap15xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()		is_omap16xx()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()		1
+# endif
+#endif
+
+#if defined(MULTI_OMAP2)
+# if defined(CONFIG_ARCH_OMAP24XX)
+#  undef  cpu_is_omap24xx
+#  undef  cpu_is_omap242x
+#  undef  cpu_is_omap243x
+#  define cpu_is_omap24xx()		is_omap24xx()
+#  define cpu_is_omap242x()		is_omap242x()
+#  define cpu_is_omap243x()		is_omap243x()
+# endif
+# if defined(CONFIG_ARCH_OMAP34XX)
+#  undef  cpu_is_omap34xx
+#  undef  cpu_is_omap343x
+#  define cpu_is_omap34xx()		is_omap34xx()
+#  define cpu_is_omap343x()		is_omap343x()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP24XX)
+#  undef  cpu_is_omap24xx
+#  define cpu_is_omap24xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP2420)
+#  undef  cpu_is_omap242x
+#  define cpu_is_omap242x()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP2430)
+#  undef  cpu_is_omap243x
+#  define cpu_is_omap243x()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP34XX)
+#  undef  cpu_is_omap34xx
+#  define cpu_is_omap34xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP3430)
+#  undef  cpu_is_omap343x
+#  define cpu_is_omap343x()		1
+# endif
+#endif
+
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap330():	True for OMAP330
+ * cpu_is_omap730():	True for OMAP730
+ * cpu_is_omap1510():	True for OMAP1510
+ * cpu_is_omap1610():	True for OMAP1610
+ * cpu_is_omap1611():	True for OMAP1611
+ * cpu_is_omap5912():	True for OMAP5912
+ * cpu_is_omap1621():	True for OMAP1621
+ * cpu_is_omap1710():	True for OMAP1710
+ * cpu_is_omap2420():	True for OMAP2420
+ * cpu_is_omap2422():	True for OMAP2422
+ * cpu_is_omap2423():	True for OMAP2423
+ * cpu_is_omap2430():	True for OMAP2430
+ * cpu_is_omap3430():	True for OMAP3430
+ */
+#define GET_OMAP_TYPE	((system_rev >> 16) & 0xffff)
+
+#define IS_OMAP_TYPE(type, id)				\
+static inline int is_omap ##type (void)			\
+{							\
+	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
+}
+
+IS_OMAP_TYPE(310, 0x0310)
+IS_OMAP_TYPE(730, 0x0730)
+IS_OMAP_TYPE(1510, 0x1510)
+IS_OMAP_TYPE(1610, 0x1610)
+IS_OMAP_TYPE(1611, 0x1611)
+IS_OMAP_TYPE(5912, 0x1611)
+IS_OMAP_TYPE(1621, 0x1621)
+IS_OMAP_TYPE(1710, 0x1710)
+IS_OMAP_TYPE(2420, 0x2420)
+IS_OMAP_TYPE(2422, 0x2422)
+IS_OMAP_TYPE(2423, 0x2423)
+IS_OMAP_TYPE(2430, 0x2430)
+IS_OMAP_TYPE(3430, 0x3430)
+
+#define cpu_is_omap310()		0
+#define cpu_is_omap730()		0
+#define cpu_is_omap1510()		0
+#define cpu_is_omap1610()		0
+#define cpu_is_omap5912()		0
+#define cpu_is_omap1611()		0
+#define cpu_is_omap1621()		0
+#define cpu_is_omap1710()		0
+#define cpu_is_omap2420()		0
+#define cpu_is_omap2422()		0
+#define cpu_is_omap2423()		0
+#define cpu_is_omap2430()		0
+#define cpu_is_omap3430()		0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap730
+#  define cpu_is_omap730()		is_omap730()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap730
+#  define cpu_is_omap730()		1
+# endif
+#endif
+
+/*
+ * Whether we have MULTI_OMAP1 or not, we still need to distinguish
+ * between 330 vs. 1510 and 1611B/5912 vs. 1710.
+ */
+#if defined(CONFIG_ARCH_OMAP15XX)
+# undef  cpu_is_omap310
+# undef  cpu_is_omap1510
+# define cpu_is_omap310()		is_omap310()
+# define cpu_is_omap1510()		is_omap1510()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+# undef  cpu_is_omap1610
+# undef  cpu_is_omap1611
+# undef  cpu_is_omap5912
+# undef  cpu_is_omap1621
+# undef  cpu_is_omap1710
+# define cpu_is_omap1610()		is_omap1610()
+# define cpu_is_omap1611()		is_omap1611()
+# define cpu_is_omap5912()		is_omap5912()
+# define cpu_is_omap1621()		is_omap1621()
+# define cpu_is_omap1710()		is_omap1710()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP24XX)
+# undef  cpu_is_omap2420
+# undef  cpu_is_omap2422
+# undef  cpu_is_omap2423
+# undef  cpu_is_omap2430
+# define cpu_is_omap2420()		is_omap2420()
+# define cpu_is_omap2422()		is_omap2422()
+# define cpu_is_omap2423()		is_omap2423()
+# define cpu_is_omap2430()		is_omap2430()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP34XX)
+# undef cpu_is_omap3430
+# define cpu_is_omap3430()		is_omap3430()
+#endif
+
+/* Macros to detect if we have OMAP1 or OMAP2 */
+#define cpu_class_is_omap1()	(cpu_is_omap730() || cpu_is_omap15xx() || \
+				cpu_is_omap16xx())
+#define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx())
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+/*
+ * Macros to detect silicon revision of OMAP2/3 processors.
+ * is_sil_rev_greater_than:	true if passed cpu type & its rev is greater.
+ * is_sil_rev_lesser_than:	true if passed cpu type & its rev is lesser.
+ * is_sil_rev_equal_to:		true if passed cpu type & its rev is equal.
+ * get_sil_rev:			return the silicon rev value.
+ */
+#define get_sil_omap_type(rev)	((rev & 0xffff0000) >> 16)
+#define get_sil_revision(rev)	((rev & 0x0000f000) >> 12)
+
+#define is_sil_rev_greater_than(rev) \
+		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
+		(get_sil_revision(system_rev) > get_sil_revision(rev)))
+
+#define is_sil_rev_less_than(rev) \
+		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
+		(get_sil_revision(system_rev) < get_sil_revision(rev)))
+
+#define is_sil_rev_equal_to(rev) \
+		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
+		(get_sil_revision(system_rev) == get_sil_revision(rev)))
+
+#define get_sil_rev() \
+		get_sil_revision(system_rev)
+
+/* Various silicon macros defined here */
+#define OMAP2420_REV_ES1_0	0x24200000
+#define OMAP2420_REV_ES2_0	0x24201000
+#define OMAP2430_REV_ES1_0	0x24300000
+#define OMAP3430_REV_ES1_0	0x34300000
+#define OMAP3430_REV_ES2_0	0x34301000
+#define OMAP3430_REV_ES2_1	0x34302000
+#define OMAP3430_REV_ES2_2	0x34303000
+
+/*
+ * omap_chip bits
+ *
+ * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is
+ * valid on all chips of that type.  CHIP_IS_OMAP3430ES{1,2} indicates
+ * something that is only valid on that particular ES revision.
+ *
+ * These bits may be ORed together to indicate structures that are
+ * available on multiple chip types.
+ *
+ * To test whether a particular structure matches the current OMAP chip type,
+ * use omap_chip_is().
+ *
+ */
+#define CHIP_IS_OMAP2420       (1 << 0)
+#define CHIP_IS_OMAP2430       (1 << 1)
+#define CHIP_IS_OMAP3430       (1 << 2)
+#define CHIP_IS_OMAP3430ES1    (1 << 3)
+#define CHIP_IS_OMAP3430ES2    (1 << 4)
+
+#define CHIP_IS_OMAP24XX       (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
+
+int omap_chip_is(struct omap_chip_id oci);
+
+
+/*
+ * Macro to detect device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define DEVICE_TYPE_TEST	0
+#define DEVICE_TYPE_EMU		1
+#define DEVICE_TYPE_SEC		2
+#define DEVICE_TYPE_GP		3
+#define DEVICE_TYPE_BAD		4
+
+#define get_device_type()	((system_rev & 0x700) >> 8)
+#define is_device_type_test()	(get_device_type() == DEVICE_TYPE_TEST)
+#define is_device_type_emu()	(get_device_type() == DEVICE_TYPE_EMU)
+#define is_device_type_sec()	(get_device_type() == DEVICE_TYPE_SEC)
+#define is_device_type_gp()	(get_device_type() == DEVICE_TYPE_GP)
+#define is_device_type_bad()	(get_device_type() == DEVICE_TYPE_BAD)
+
+void omap2_check_revision(void);
+
+#endif    /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
new file mode 100644
index 0000000..1b0039b
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
@@ -0,0 +1,58 @@
+/* arch/arm/plat-omap/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+#ifdef CONFIG_ARCH_OMAP1
+		moveq	\rx, #0xff000000	@ physical base address
+		movne	\rx, #0xfe000000	@ virtual base
+		orr	\rx, \rx, #0x00fb0000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+		orr	\rx, \rx, #0x00009000	@ UART 3
+#endif
+#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
+		orr	\rx, \rx, #0x00000800	@ UART 2 & 3
+#endif
+
+#elif  CONFIG_ARCH_OMAP2
+		moveq	\rx, #0x48000000	@ physical base address
+		movne	\rx, #0xd8000000	@ virtual base
+		orr	\rx, \rx, #0x0006a000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART2
+		add	\rx, \rx, #0x00002000	@ UART 2
+#endif
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+		add	\rx, \rx, #0x00004000	@ UART 3
+#endif
+#endif
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx]
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldrb	\rd, [\rx, #(0x5 << 2)]	@ OMAP-1510 and friends
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		beq	1002f
+		ldrb	\rd, [\rx, #(0x5 << 0)]	@ OMAP-730 only
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		bne	1001b
+1002:
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
new file mode 100644
index 0000000..54fe966
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -0,0 +1,570 @@
+/*
+ *  arch/arm/plat-omap/include/mach/dma.h
+ *
+ *  Copyright (C) 2003 Nokia Corporation
+ *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* Hardware registers for omap1 */
+#define OMAP1_DMA_BASE			(0xfffed800)
+
+#define OMAP1_DMA_GCR			0x400
+#define OMAP1_DMA_GSCR			0x404
+#define OMAP1_DMA_GRST			0x408
+#define OMAP1_DMA_HW_ID			0x442
+#define OMAP1_DMA_PCH2_ID		0x444
+#define OMAP1_DMA_PCH0_ID		0x446
+#define OMAP1_DMA_PCH1_ID		0x448
+#define OMAP1_DMA_PCHG_ID		0x44a
+#define OMAP1_DMA_PCHD_ID		0x44c
+#define OMAP1_DMA_CAPS_0_U		0x44e
+#define OMAP1_DMA_CAPS_0_L		0x450
+#define OMAP1_DMA_CAPS_1_U		0x452
+#define OMAP1_DMA_CAPS_1_L		0x454
+#define OMAP1_DMA_CAPS_2		0x456
+#define OMAP1_DMA_CAPS_3		0x458
+#define OMAP1_DMA_CAPS_4		0x45a
+#define OMAP1_DMA_PCH2_SR		0x460
+#define OMAP1_DMA_PCH0_SR		0x480
+#define OMAP1_DMA_PCH1_SR		0x482
+#define OMAP1_DMA_PCHD_SR		0x4c0
+
+/* Hardware registers for omap2 and omap3 */
+#define OMAP24XX_DMA4_BASE		(L4_24XX_BASE + 0x56000)
+#define OMAP34XX_DMA4_BASE		(L4_34XX_BASE + 0x56000)
+
+#define OMAP_DMA4_REVISION		0x00
+#define OMAP_DMA4_GCR			0x78
+#define OMAP_DMA4_IRQSTATUS_L0		0x08
+#define OMAP_DMA4_IRQSTATUS_L1		0x0c
+#define OMAP_DMA4_IRQSTATUS_L2		0x10
+#define OMAP_DMA4_IRQSTATUS_L3		0x14
+#define OMAP_DMA4_IRQENABLE_L0		0x18
+#define OMAP_DMA4_IRQENABLE_L1		0x1c
+#define OMAP_DMA4_IRQENABLE_L2		0x20
+#define OMAP_DMA4_IRQENABLE_L3		0x24
+#define OMAP_DMA4_SYSSTATUS		0x28
+#define OMAP_DMA4_OCP_SYSCONFIG		0x2c
+#define OMAP_DMA4_CAPS_0		0x64
+#define OMAP_DMA4_CAPS_2		0x6c
+#define OMAP_DMA4_CAPS_3		0x70
+#define OMAP_DMA4_CAPS_4		0x74
+
+#define OMAP1_LOGICAL_DMA_CH_COUNT	17
+#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT	32	/* REVISIT: Is this 32 + 2? */
+
+/* Common channel specific registers for omap1 */
+#define OMAP1_DMA_CH_BASE(n)		(0x40 * (n) + 0x00)
+#define OMAP1_DMA_CSDP(n)		(0x40 * (n) + 0x00)
+#define OMAP1_DMA_CCR(n)		(0x40 * (n) + 0x02)
+#define OMAP1_DMA_CICR(n)		(0x40 * (n) + 0x04)
+#define OMAP1_DMA_CSR(n)		(0x40 * (n) + 0x06)
+#define OMAP1_DMA_CEN(n)		(0x40 * (n) + 0x10)
+#define OMAP1_DMA_CFN(n)		(0x40 * (n) + 0x12)
+#define OMAP1_DMA_CSFI(n)		(0x40 * (n) + 0x14)
+#define OMAP1_DMA_CSEI(n)		(0x40 * (n) + 0x16)
+#define OMAP1_DMA_CPC(n)		(0x40 * (n) + 0x18)	/* 15xx only */
+#define OMAP1_DMA_CSAC(n)		(0x40 * (n) + 0x18)
+#define OMAP1_DMA_CDAC(n)		(0x40 * (n) + 0x1a)
+#define OMAP1_DMA_CDEI(n)		(0x40 * (n) + 0x1c)
+#define OMAP1_DMA_CDFI(n)		(0x40 * (n) + 0x1e)
+#define OMAP1_DMA_CLNK_CTRL(n)		(0x40 * (n) + 0x28)
+
+/* Common channel specific registers for omap2 */
+#define OMAP_DMA4_CH_BASE(n)		(0x60 * (n) + 0x80)
+#define OMAP_DMA4_CCR(n)		(0x60 * (n) + 0x80)
+#define OMAP_DMA4_CLNK_CTRL(n)		(0x60 * (n) + 0x84)
+#define OMAP_DMA4_CICR(n)		(0x60 * (n) + 0x88)
+#define OMAP_DMA4_CSR(n)		(0x60 * (n) + 0x8c)
+#define OMAP_DMA4_CSDP(n)		(0x60 * (n) + 0x90)
+#define OMAP_DMA4_CEN(n)		(0x60 * (n) + 0x94)
+#define OMAP_DMA4_CFN(n)		(0x60 * (n) + 0x98)
+#define OMAP_DMA4_CSEI(n)		(0x60 * (n) + 0xa4)
+#define OMAP_DMA4_CSFI(n)		(0x60 * (n) + 0xa8)
+#define OMAP_DMA4_CDEI(n)		(0x60 * (n) + 0xac)
+#define OMAP_DMA4_CDFI(n)		(0x60 * (n) + 0xb0)
+#define OMAP_DMA4_CSAC(n)		(0x60 * (n) + 0xb4)
+#define OMAP_DMA4_CDAC(n)		(0x60 * (n) + 0xb8)
+
+/* Channel specific registers only on omap1 */
+#define OMAP1_DMA_CSSA_L(n)		(0x40 * (n) + 0x08)
+#define OMAP1_DMA_CSSA_U(n)		(0x40 * (n) + 0x0a)
+#define OMAP1_DMA_CDSA_L(n)		(0x40 * (n) + 0x0c)
+#define OMAP1_DMA_CDSA_U(n)		(0x40 * (n) + 0x0e)
+#define OMAP1_DMA_COLOR_L(n)		(0x40 * (n) + 0x20)
+#define OMAP1_DMA_COLOR_U(n)		(0x40 * (n) + 0x22)
+#define OMAP1_DMA_CCR2(n)		(0x40 * (n) + 0x24)
+#define OMAP1_DMA_LCH_CTRL(n)		(0x40 * (n) + 0x2a)	/* not on 15xx */
+#define OMAP1_DMA_CCEN(n)		0
+#define OMAP1_DMA_CCFN(n)		0
+
+/* Channel specific registers only on omap2 */
+#define OMAP_DMA4_CSSA(n)		(0x60 * (n) + 0x9c)
+#define OMAP_DMA4_CDSA(n)		(0x60 * (n) + 0xa0)
+#define OMAP_DMA4_CCEN(n)		(0x60 * (n) + 0xbc)
+#define OMAP_DMA4_CCFN(n)		(0x60 * (n) + 0xc0)
+#define OMAP_DMA4_COLOR(n)		(0x60 * (n) + 0xc4)
+
+/* Dummy defines to keep multi-omap compiles happy */
+#define OMAP1_DMA_REVISION		0
+#define OMAP1_DMA_IRQSTATUS_L0		0
+#define OMAP1_DMA_IRQENABLE_L0		0
+#define OMAP1_DMA_OCP_SYSCONFIG		0
+#define OMAP_DMA4_HW_ID			0
+#define OMAP_DMA4_CAPS_0_L		0
+#define OMAP_DMA4_CAPS_0_U		0
+#define OMAP_DMA4_CAPS_1_L		0
+#define OMAP_DMA4_CAPS_1_U		0
+#define OMAP_DMA4_GSCR			0
+#define OMAP_DMA4_CPC(n)		0
+
+#define OMAP_DMA4_LCH_CTRL(n)		0
+#define OMAP_DMA4_COLOR_L(n)		0
+#define OMAP_DMA4_COLOR_U(n)		0
+#define OMAP_DMA4_CCR2(n)		0
+#define OMAP1_DMA_CSSA(n)		0
+#define OMAP1_DMA_CDSA(n)		0
+#define OMAP_DMA4_CSSA_L(n)		0
+#define OMAP_DMA4_CSSA_U(n)		0
+#define OMAP_DMA4_CDSA_L(n)		0
+#define OMAP_DMA4_CDSA_U(n)		0
+
+/*----------------------------------------------------------------------------*/
+
+/* DMA channels for omap1 */
+#define OMAP_DMA_NO_DEVICE		0
+#define OMAP_DMA_MCSI1_TX		1
+#define OMAP_DMA_MCSI1_RX		2
+#define OMAP_DMA_I2C_RX			3
+#define OMAP_DMA_I2C_TX			4
+#define OMAP_DMA_EXT_NDMA_REQ		5
+#define OMAP_DMA_EXT_NDMA_REQ2		6
+#define OMAP_DMA_UWIRE_TX		7
+#define OMAP_DMA_MCBSP1_TX		8
+#define OMAP_DMA_MCBSP1_RX		9
+#define OMAP_DMA_MCBSP3_TX		10
+#define OMAP_DMA_MCBSP3_RX		11
+#define OMAP_DMA_UART1_TX		12
+#define OMAP_DMA_UART1_RX		13
+#define OMAP_DMA_UART2_TX		14
+#define OMAP_DMA_UART2_RX		15
+#define OMAP_DMA_MCBSP2_TX		16
+#define OMAP_DMA_MCBSP2_RX		17
+#define OMAP_DMA_UART3_TX		18
+#define OMAP_DMA_UART3_RX		19
+#define OMAP_DMA_CAMERA_IF_RX		20
+#define OMAP_DMA_MMC_TX			21
+#define OMAP_DMA_MMC_RX			22
+#define OMAP_DMA_NAND			23
+#define OMAP_DMA_IRQ_LCD_LINE		24
+#define OMAP_DMA_MEMORY_STICK		25
+#define OMAP_DMA_USB_W2FC_RX0		26
+#define OMAP_DMA_USB_W2FC_RX1		27
+#define OMAP_DMA_USB_W2FC_RX2		28
+#define OMAP_DMA_USB_W2FC_TX0		29
+#define OMAP_DMA_USB_W2FC_TX1		30
+#define OMAP_DMA_USB_W2FC_TX2		31
+
+/* These are only for 1610 */
+#define OMAP_DMA_CRYPTO_DES_IN		32
+#define OMAP_DMA_SPI_TX			33
+#define OMAP_DMA_SPI_RX			34
+#define OMAP_DMA_CRYPTO_HASH		35
+#define OMAP_DMA_CCP_ATTN		36
+#define OMAP_DMA_CCP_FIFO_NOT_EMPTY	37
+#define OMAP_DMA_CMT_APE_TX_CHAN_0	38
+#define OMAP_DMA_CMT_APE_RV_CHAN_0	39
+#define OMAP_DMA_CMT_APE_TX_CHAN_1	40
+#define OMAP_DMA_CMT_APE_RV_CHAN_1	41
+#define OMAP_DMA_CMT_APE_TX_CHAN_2	42
+#define OMAP_DMA_CMT_APE_RV_CHAN_2	43
+#define OMAP_DMA_CMT_APE_TX_CHAN_3	44
+#define OMAP_DMA_CMT_APE_RV_CHAN_3	45
+#define OMAP_DMA_CMT_APE_TX_CHAN_4	46
+#define OMAP_DMA_CMT_APE_RV_CHAN_4	47
+#define OMAP_DMA_CMT_APE_TX_CHAN_5	48
+#define OMAP_DMA_CMT_APE_RV_CHAN_5	49
+#define OMAP_DMA_CMT_APE_TX_CHAN_6	50
+#define OMAP_DMA_CMT_APE_RV_CHAN_6	51
+#define OMAP_DMA_CMT_APE_TX_CHAN_7	52
+#define OMAP_DMA_CMT_APE_RV_CHAN_7	53
+#define OMAP_DMA_MMC2_TX		54
+#define OMAP_DMA_MMC2_RX		55
+#define OMAP_DMA_CRYPTO_DES_OUT		56
+
+/* DMA channels for 24xx */
+#define OMAP24XX_DMA_NO_DEVICE		0
+#define OMAP24XX_DMA_XTI_DMA		1	/* S_DMA_0 */
+#define OMAP24XX_DMA_EXT_DMAREQ0	2	/* S_DMA_1 */
+#define OMAP24XX_DMA_EXT_DMAREQ1	3	/* S_DMA_2 */
+#define OMAP24XX_DMA_GPMC		4	/* S_DMA_3 */
+#define OMAP24XX_DMA_GFX		5	/* S_DMA_4 */
+#define OMAP24XX_DMA_DSS		6	/* S_DMA_5 */
+#define OMAP242X_DMA_VLYNQ_TX		7	/* S_DMA_6 */
+#define OMAP24XX_DMA_EXT_DMAREQ2	7	/* S_DMA_6 */
+#define OMAP24XX_DMA_CWT		8	/* S_DMA_7 */
+#define OMAP24XX_DMA_AES_TX		9	/* S_DMA_8 */
+#define OMAP24XX_DMA_AES_RX		10	/* S_DMA_9 */
+#define OMAP24XX_DMA_DES_TX		11	/* S_DMA_10 */
+#define OMAP24XX_DMA_DES_RX		12	/* S_DMA_11 */
+#define OMAP24XX_DMA_SHA1MD5_RX		13	/* S_DMA_12 */
+#define OMAP34XX_DMA_SHA2MD5_RX		13	/* S_DMA_12 */
+#define OMAP242X_DMA_EXT_DMAREQ2	14	/* S_DMA_13 */
+#define OMAP242X_DMA_EXT_DMAREQ3	15	/* S_DMA_14 */
+#define OMAP242X_DMA_EXT_DMAREQ4	16	/* S_DMA_15 */
+#define OMAP242X_DMA_EAC_AC_RD		17	/* S_DMA_16 */
+#define OMAP242X_DMA_EAC_AC_WR		18	/* S_DMA_17 */
+#define OMAP242X_DMA_EAC_MD_UL_RD	19	/* S_DMA_18 */
+#define OMAP242X_DMA_EAC_MD_UL_WR	20	/* S_DMA_19 */
+#define OMAP242X_DMA_EAC_MD_DL_RD	21	/* S_DMA_20 */
+#define OMAP242X_DMA_EAC_MD_DL_WR	22	/* S_DMA_21 */
+#define OMAP242X_DMA_EAC_BT_UL_RD	23	/* S_DMA_22 */
+#define OMAP242X_DMA_EAC_BT_UL_WR	24	/* S_DMA_23 */
+#define OMAP242X_DMA_EAC_BT_DL_RD	25	/* S_DMA_24 */
+#define OMAP242X_DMA_EAC_BT_DL_WR	26	/* S_DMA_25 */
+#define OMAP243X_DMA_EXT_DMAREQ3	14	/* S_DMA_13 */
+#define OMAP24XX_DMA_SPI3_TX0		15	/* S_DMA_14 */
+#define OMAP24XX_DMA_SPI3_RX0		16	/* S_DMA_15 */
+#define OMAP24XX_DMA_MCBSP3_TX		17	/* S_DMA_16 */
+#define OMAP24XX_DMA_MCBSP3_RX		18	/* S_DMA_17 */
+#define OMAP24XX_DMA_MCBSP4_TX		19	/* S_DMA_18 */
+#define OMAP24XX_DMA_MCBSP4_RX		20	/* S_DMA_19 */
+#define OMAP24XX_DMA_MCBSP5_TX		21	/* S_DMA_20 */
+#define OMAP24XX_DMA_MCBSP5_RX		22	/* S_DMA_21 */
+#define OMAP24XX_DMA_SPI3_TX1		23	/* S_DMA_22 */
+#define OMAP24XX_DMA_SPI3_RX1		24	/* S_DMA_23 */
+#define OMAP243X_DMA_EXT_DMAREQ4	25	/* S_DMA_24 */
+#define OMAP243X_DMA_EXT_DMAREQ5	26	/* S_DMA_25 */
+#define OMAP34XX_DMA_I2C3_TX		25	/* S_DMA_24 */
+#define OMAP34XX_DMA_I2C3_RX		26	/* S_DMA_25 */
+#define OMAP24XX_DMA_I2C1_TX		27	/* S_DMA_26 */
+#define OMAP24XX_DMA_I2C1_RX		28	/* S_DMA_27 */
+#define OMAP24XX_DMA_I2C2_TX		29	/* S_DMA_28 */
+#define OMAP24XX_DMA_I2C2_RX		30	/* S_DMA_29 */
+#define OMAP24XX_DMA_MCBSP1_TX		31	/* S_DMA_30 */
+#define OMAP24XX_DMA_MCBSP1_RX		32	/* S_DMA_31 */
+#define OMAP24XX_DMA_MCBSP2_TX		33	/* S_DMA_32 */
+#define OMAP24XX_DMA_MCBSP2_RX		34	/* S_DMA_33 */
+#define OMAP24XX_DMA_SPI1_TX0		35	/* S_DMA_34 */
+#define OMAP24XX_DMA_SPI1_RX0		36	/* S_DMA_35 */
+#define OMAP24XX_DMA_SPI1_TX1		37	/* S_DMA_36 */
+#define OMAP24XX_DMA_SPI1_RX1		38	/* S_DMA_37 */
+#define OMAP24XX_DMA_SPI1_TX2		39	/* S_DMA_38 */
+#define OMAP24XX_DMA_SPI1_RX2		40	/* S_DMA_39 */
+#define OMAP24XX_DMA_SPI1_TX3		41	/* S_DMA_40 */
+#define OMAP24XX_DMA_SPI1_RX3		42	/* S_DMA_41 */
+#define OMAP24XX_DMA_SPI2_TX0		43	/* S_DMA_42 */
+#define OMAP24XX_DMA_SPI2_RX0		44	/* S_DMA_43 */
+#define OMAP24XX_DMA_SPI2_TX1		45	/* S_DMA_44 */
+#define OMAP24XX_DMA_SPI2_RX1		46	/* S_DMA_45 */
+#define OMAP24XX_DMA_MMC2_TX		47	/* S_DMA_46 */
+#define OMAP24XX_DMA_MMC2_RX		48	/* S_DMA_47 */
+#define OMAP24XX_DMA_UART1_TX		49	/* S_DMA_48 */
+#define OMAP24XX_DMA_UART1_RX		50	/* S_DMA_49 */
+#define OMAP24XX_DMA_UART2_TX		51	/* S_DMA_50 */
+#define OMAP24XX_DMA_UART2_RX		52	/* S_DMA_51 */
+#define OMAP24XX_DMA_UART3_TX		53	/* S_DMA_52 */
+#define OMAP24XX_DMA_UART3_RX		54	/* S_DMA_53 */
+#define OMAP24XX_DMA_USB_W2FC_TX0	55	/* S_DMA_54 */
+#define OMAP24XX_DMA_USB_W2FC_RX0	56	/* S_DMA_55 */
+#define OMAP24XX_DMA_USB_W2FC_TX1	57	/* S_DMA_56 */
+#define OMAP24XX_DMA_USB_W2FC_RX1	58	/* S_DMA_57 */
+#define OMAP24XX_DMA_USB_W2FC_TX2	59	/* S_DMA_58 */
+#define OMAP24XX_DMA_USB_W2FC_RX2	60	/* S_DMA_59 */
+#define OMAP24XX_DMA_MMC1_TX		61	/* S_DMA_60 */
+#define OMAP24XX_DMA_MMC1_RX		62	/* S_DMA_61 */
+#define OMAP24XX_DMA_MS			63	/* S_DMA_62 */
+#define OMAP242X_DMA_EXT_DMAREQ5	64	/* S_DMA_63 */
+#define OMAP243X_DMA_EXT_DMAREQ6	64	/* S_DMA_63 */
+#define OMAP34XX_DMA_EXT_DMAREQ3	64	/* S_DMA_63 */
+#define OMAP34XX_DMA_AES2_TX		65	/* S_DMA_64 */
+#define OMAP34XX_DMA_AES2_RX		66	/* S_DMA_65 */
+#define OMAP34XX_DMA_DES2_TX		67	/* S_DMA_66 */
+#define OMAP34XX_DMA_DES2_RX		68	/* S_DMA_67 */
+#define OMAP34XX_DMA_SHA1MD5_RX		69	/* S_DMA_68 */
+#define OMAP34XX_DMA_SPI4_TX0		70	/* S_DMA_69 */
+#define OMAP34XX_DMA_SPI4_RX0		71	/* S_DMA_70 */
+#define OMAP34XX_DSS_DMA0		72	/* S_DMA_71 */
+#define OMAP34XX_DSS_DMA1		73	/* S_DMA_72 */
+#define OMAP34XX_DSS_DMA2		74	/* S_DMA_73 */
+#define OMAP34XX_DSS_DMA3		75	/* S_DMA_74 */
+#define OMAP34XX_DMA_MMC3_TX		77	/* S_DMA_76 */
+#define OMAP34XX_DMA_MMC3_RX		78	/* S_DMA_77 */
+#define OMAP34XX_DMA_USIM_TX		79	/* S_DMA_78 */
+#define OMAP34XX_DMA_USIM_RX		80	/* S_DMA_79 */
+
+/*----------------------------------------------------------------------------*/
+
+/* Hardware registers for LCD DMA */
+#define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
+#define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
+#define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
+#define OMAP1510_DMA_LCD_TOP_F1_U	(OMAP1510_DMA_LCD_BASE + 0x04)
+#define OMAP1510_DMA_LCD_BOT_F1_L	(OMAP1510_DMA_LCD_BASE + 0x06)
+#define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
+
+#define OMAP1610_DMA_LCD_BASE		(0xfffee300)
+#define OMAP1610_DMA_LCD_CSDP		(OMAP1610_DMA_LCD_BASE + 0xc0)
+#define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
+#define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
+#define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
+#define OMAP1610_DMA_LCD_TOP_B1_U	(OMAP1610_DMA_LCD_BASE + 0xca)
+#define OMAP1610_DMA_LCD_BOT_B1_L	(OMAP1610_DMA_LCD_BASE + 0xcc)
+#define OMAP1610_DMA_LCD_BOT_B1_U	(OMAP1610_DMA_LCD_BASE + 0xce)
+#define OMAP1610_DMA_LCD_TOP_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd0)
+#define OMAP1610_DMA_LCD_TOP_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd2)
+#define OMAP1610_DMA_LCD_BOT_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd4)
+#define OMAP1610_DMA_LCD_BOT_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd6)
+#define OMAP1610_DMA_LCD_SRC_EI_B1	(OMAP1610_DMA_LCD_BASE + 0xd8)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_L	(OMAP1610_DMA_LCD_BASE + 0xda)
+#define OMAP1610_DMA_LCD_SRC_EN_B1	(OMAP1610_DMA_LCD_BASE + 0xe0)
+#define OMAP1610_DMA_LCD_SRC_FN_B1	(OMAP1610_DMA_LCD_BASE + 0xe4)
+#define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
+
+#define OMAP1_DMA_TOUT_IRQ		(1 << 0)
+#define OMAP_DMA_DROP_IRQ		(1 << 1)
+#define OMAP_DMA_HALF_IRQ		(1 << 2)
+#define OMAP_DMA_FRAME_IRQ		(1 << 3)
+#define OMAP_DMA_LAST_IRQ		(1 << 4)
+#define OMAP_DMA_BLOCK_IRQ		(1 << 5)
+#define OMAP1_DMA_SYNC_IRQ		(1 << 6)
+#define OMAP2_DMA_PKT_IRQ		(1 << 7)
+#define OMAP2_DMA_TRANS_ERR_IRQ		(1 << 8)
+#define OMAP2_DMA_SECURE_ERR_IRQ	(1 << 9)
+#define OMAP2_DMA_SUPERVISOR_ERR_IRQ	(1 << 10)
+#define OMAP2_DMA_MISALIGNED_ERR_IRQ	(1 << 11)
+
+#define OMAP_DMA_DATA_TYPE_S8		0x00
+#define OMAP_DMA_DATA_TYPE_S16		0x01
+#define OMAP_DMA_DATA_TYPE_S32		0x02
+
+#define OMAP_DMA_SYNC_ELEMENT		0x00
+#define OMAP_DMA_SYNC_FRAME		0x01
+#define OMAP_DMA_SYNC_BLOCK		0x02
+#define OMAP_DMA_SYNC_PACKET		0x03
+
+#define OMAP_DMA_SRC_SYNC		0x01
+#define OMAP_DMA_DST_SYNC		0x00
+
+#define OMAP_DMA_PORT_EMIFF		0x00
+#define OMAP_DMA_PORT_EMIFS		0x01
+#define OMAP_DMA_PORT_OCP_T1		0x02
+#define OMAP_DMA_PORT_TIPB		0x03
+#define OMAP_DMA_PORT_OCP_T2		0x04
+#define OMAP_DMA_PORT_MPUI		0x05
+
+#define OMAP_DMA_AMODE_CONSTANT		0x00
+#define OMAP_DMA_AMODE_POST_INC		0x01
+#define OMAP_DMA_AMODE_SINGLE_IDX	0x02
+#define OMAP_DMA_AMODE_DOUBLE_IDX	0x03
+
+#define DMA_DEFAULT_FIFO_DEPTH		0x10
+#define DMA_DEFAULT_ARB_RATE		0x01
+/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */
+#define DMA_THREAD_RESERVE_NORM		(0x00 << 12) /* Def */
+#define DMA_THREAD_RESERVE_ONET		(0x01 << 12)
+#define DMA_THREAD_RESERVE_TWOT		(0x02 << 12)
+#define DMA_THREAD_RESERVE_THREET	(0x03 << 12)
+#define DMA_THREAD_FIFO_NONE		(0x00 << 14) /* Def */
+#define DMA_THREAD_FIFO_75		(0x01 << 14)
+#define DMA_THREAD_FIFO_25		(0x02 << 14)
+#define DMA_THREAD_FIFO_50		(0x03 << 14)
+
+/* Chaining modes*/
+#ifndef CONFIG_ARCH_OMAP1
+#define OMAP_DMA_STATIC_CHAIN		0x1
+#define OMAP_DMA_DYNAMIC_CHAIN		0x2
+#define OMAP_DMA_CHAIN_ACTIVE		0x1
+#define OMAP_DMA_CHAIN_INACTIVE		0x0
+#endif
+
+#define DMA_CH_PRIO_HIGH		0x1
+#define DMA_CH_PRIO_LOW			0x0 /* Def */
+
+/* LCD DMA block numbers */
+enum {
+	OMAP_LCD_DMA_B1_TOP,
+	OMAP_LCD_DMA_B1_BOTTOM,
+	OMAP_LCD_DMA_B2_TOP,
+	OMAP_LCD_DMA_B2_BOTTOM
+};
+
+enum omap_dma_burst_mode {
+	OMAP_DMA_DATA_BURST_DIS = 0,
+	OMAP_DMA_DATA_BURST_4,
+	OMAP_DMA_DATA_BURST_8,
+	OMAP_DMA_DATA_BURST_16,
+};
+
+enum end_type {
+	OMAP_DMA_LITTLE_ENDIAN = 0,
+	OMAP_DMA_BIG_ENDIAN
+};
+
+enum omap_dma_color_mode {
+	OMAP_DMA_COLOR_DIS = 0,
+	OMAP_DMA_CONSTANT_FILL,
+	OMAP_DMA_TRANSPARENT_COPY
+};
+
+enum omap_dma_write_mode {
+	OMAP_DMA_WRITE_NON_POSTED = 0,
+	OMAP_DMA_WRITE_POSTED,
+	OMAP_DMA_WRITE_LAST_NON_POSTED
+};
+
+enum omap_dma_channel_mode {
+	OMAP_DMA_LCH_2D = 0,
+	OMAP_DMA_LCH_G,
+	OMAP_DMA_LCH_P,
+	OMAP_DMA_LCH_PD
+};
+
+struct omap_dma_channel_params {
+	int data_type;		/* data type 8,16,32 */
+	int elem_count;		/* number of elements in a frame */
+	int frame_count;	/* number of frames in a element */
+
+	int src_port;		/* Only on OMAP1 REVISIT: Is this needed? */
+	int src_amode;		/* constant, post increment, indexed,
+					double indexed */
+	unsigned long src_start;	/* source address : physical */
+	int src_ei;		/* source element index */
+	int src_fi;		/* source frame index */
+
+	int dst_port;		/* Only on OMAP1 REVISIT: Is this needed? */
+	int dst_amode;		/* constant, post increment, indexed,
+					double indexed */
+	unsigned long dst_start;	/* source address : physical */
+	int dst_ei;		/* source element index */
+	int dst_fi;		/* source frame index */
+
+	int trigger;		/* trigger attached if the channel is
+					synchronized */
+	int sync_mode;		/* sycn on element, frame , block or packet */
+	int src_or_dst_synch;	/* source synch(1) or destination synch(0) */
+
+	int ie;			/* interrupt enabled */
+
+	unsigned char read_prio;/* read priority */
+	unsigned char write_prio;/* write priority */
+
+#ifndef CONFIG_ARCH_OMAP1
+	enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */
+#endif
+};
+
+
+extern void omap_set_dma_priority(int lch, int dst_port, int priority);
+extern int omap_request_dma(int dev_id, const char *dev_name,
+			void (*callback)(int lch, u16 ch_status, void *data),
+			void *data, int *dma_ch);
+extern void omap_enable_dma_irq(int ch, u16 irq_bits);
+extern void omap_disable_dma_irq(int ch, u16 irq_bits);
+extern void omap_free_dma(int ch);
+extern void omap_start_dma(int lch);
+extern void omap_stop_dma(int lch);
+extern void omap_set_dma_transfer_params(int lch, int data_type,
+					 int elem_count, int frame_count,
+					 int sync_mode,
+					 int dma_trigger, int src_or_dst_synch);
+extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode,
+				    u32 color);
+extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode);
+extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode);
+
+extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
+				    unsigned long src_start,
+				    int src_ei, int src_fi);
+extern void omap_set_dma_src_index(int lch, int eidx, int fidx);
+extern void omap_set_dma_src_data_pack(int lch, int enable);
+extern void omap_set_dma_src_burst_mode(int lch,
+					enum omap_dma_burst_mode burst_mode);
+
+extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
+				     unsigned long dest_start,
+				     int dst_ei, int dst_fi);
+extern void omap_set_dma_dest_index(int lch, int eidx, int fidx);
+extern void omap_set_dma_dest_data_pack(int lch, int enable);
+extern void omap_set_dma_dest_burst_mode(int lch,
+					 enum omap_dma_burst_mode burst_mode);
+
+extern void omap_set_dma_params(int lch,
+				struct omap_dma_channel_params *params);
+
+extern void omap_dma_link_lch(int lch_head, int lch_queue);
+extern void omap_dma_unlink_lch(int lch_head, int lch_queue);
+
+extern int omap_set_dma_callback(int lch,
+			void (*callback)(int lch, u16 ch_status, void *data),
+			void *data);
+extern dma_addr_t omap_get_dma_src_pos(int lch);
+extern dma_addr_t omap_get_dma_dst_pos(int lch);
+extern void omap_clear_dma(int lch);
+extern int omap_get_dma_active_status(int lch);
+extern int omap_dma_running(void);
+extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth,
+				       int tparams);
+extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio,
+				 unsigned char write_prio);
+extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype);
+extern void omap_set_dma_src_endian_type(int lch, enum end_type etype);
+extern int omap_get_dma_index(int lch, int *ei, int *fi);
+
+/* Chaining APIs */
+#ifndef CONFIG_ARCH_OMAP1
+extern int omap_request_dma_chain(int dev_id, const char *dev_name,
+				  void (*callback) (int chain_id, u16 ch_status,
+						    void *data),
+				  int *chain_id, int no_of_chans,
+				  int chain_mode,
+				  struct omap_dma_channel_params params);
+extern int omap_free_dma_chain(int chain_id);
+extern int omap_dma_chain_a_transfer(int chain_id, int src_start,
+				     int dest_start, int elem_count,
+				     int frame_count, void *callbk_data);
+extern int omap_start_dma_chain_transfers(int chain_id);
+extern int omap_stop_dma_chain_transfers(int chain_id);
+extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi);
+extern int omap_get_dma_chain_dst_pos(int chain_id);
+extern int omap_get_dma_chain_src_pos(int chain_id);
+
+extern int omap_modify_dma_chain_params(int chain_id,
+					struct omap_dma_channel_params params);
+extern int omap_dma_chain_status(int chain_id);
+#endif
+
+/* LCD DMA functions */
+extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
+				void *data);
+extern void omap_free_lcd_dma(void);
+extern void omap_setup_lcd_dma(void);
+extern void omap_enable_lcd_dma(void);
+extern void omap_stop_lcd_dma(void);
+extern void omap_set_lcd_dma_ext_controller(int external);
+extern void omap_set_lcd_dma_single_transfer(int single);
+extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
+				int data_type);
+extern void omap_set_lcd_dma_b1_rotation(int rotate);
+extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
+extern void omap_set_lcd_dma_b1_mirror(int mirror);
+extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/plat-omap/include/mach/dmtimer.h b/arch/arm/plat-omap/include/mach/dmtimer.h
new file mode 100644
index 0000000..6dc70313
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/dmtimer.h
@@ -0,0 +1,84 @@
+/*
+ * arch/arm/plat-omap/include/mach/dmtimer.h
+ *
+ * OMAP Dual-Mode Timers
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ * PWM and clock framwork support by Timo Teras.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_DMTIMER_H
+#define __ASM_ARCH_DMTIMER_H
+
+/* clock sources */
+#define OMAP_TIMER_SRC_SYS_CLK			0x00
+#define OMAP_TIMER_SRC_32_KHZ			0x01
+#define OMAP_TIMER_SRC_EXT_CLK			0x02
+
+/* timer interrupt enable bits */
+#define OMAP_TIMER_INT_CAPTURE			(1 << 2)
+#define OMAP_TIMER_INT_OVERFLOW			(1 << 1)
+#define OMAP_TIMER_INT_MATCH			(1 << 0)
+
+/* trigger types */
+#define OMAP_TIMER_TRIGGER_NONE			0x00
+#define OMAP_TIMER_TRIGGER_OVERFLOW		0x01
+#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE	0x02
+
+struct omap_dm_timer;
+struct clk;
+
+int omap_dm_timer_init(void);
+
+struct omap_dm_timer *omap_dm_timer_request(void);
+struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
+void omap_dm_timer_free(struct omap_dm_timer *timer);
+void omap_dm_timer_enable(struct omap_dm_timer *timer);
+void omap_dm_timer_disable(struct omap_dm_timer *timer);
+
+int omap_dm_timer_get_irq(struct omap_dm_timer *timer);
+
+u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
+struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer);
+
+void omap_dm_timer_trigger(struct omap_dm_timer *timer);
+void omap_dm_timer_start(struct omap_dm_timer *timer);
+void omap_dm_timer_stop(struct omap_dm_timer *timer);
+
+void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
+void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
+void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
+void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
+
+void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
+
+unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
+void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
+unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
+void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
+
+int omap_dm_timers_active(void);
+
+
+#endif /* __ASM_ARCH_DMTIMER_H */
diff --git a/include/asm-arm/arch-omap/dsp_common.h b/arch/arm/plat-omap/include/mach/dsp_common.h
similarity index 100%
rename from include/asm-arm/arch-omap/dsp_common.h
rename to arch/arm/plat-omap/include/mach/dsp_common.h
diff --git a/arch/arm/plat-omap/include/mach/eac.h b/arch/arm/plat-omap/include/mach/eac.h
new file mode 100644
index 0000000..9e62cf0
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/eac.h
@@ -0,0 +1,100 @@
+/*
+ * arch/arm/plat-omap/include/mach2/eac.h
+ *
+ * Defines for Enhanced Audio Controller
+ *
+ * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H
+#define __ASM_ARM_ARCH_OMAP2_EAC_H
+
+#include <mach/io.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <sound/core.h>
+
+/* master codec clock source */
+#define EAC_MCLK_EXT_MASK	0x100
+enum eac_mclk_src {
+	EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */
+	EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK,
+	EAC_MCLK_EXT_12288000,
+	EAC_MCLK_EXT_2x11289600,
+	EAC_MCLK_EXT_2x12288000,
+};
+
+/* codec port interface mode */
+enum eac_codec_mode {
+	EAC_CODEC_PCM,
+	EAC_CODEC_AC97,
+	EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */
+	EAC_CODEC_I2S_SLAVE,
+};
+
+/* configuration structure for I2S mode */
+struct eac_i2s_conf {
+	/* if enabled, then first data slot (left channel) is signaled as
+	 * positive level of frame sync EAC.AC_FS */
+	unsigned	polarity_changed_mode:1;
+	/* if enabled, then serial data starts one clock cycle after the
+	 * of EAC.AC_FS for first audio slot */
+	unsigned	sync_delay_enable:1;
+};
+
+/* configuration structure for EAC codec port */
+struct eac_codec {
+	enum eac_mclk_src	mclk_src;
+
+	enum eac_codec_mode	codec_mode;
+	union {
+		struct eac_i2s_conf	i2s;
+	} codec_conf;
+
+	int		default_rate; /* audio sampling rate */
+
+	int		(* set_power)(void *private_data, int dac, int adc);
+	int		(* register_controls)(void *private_data,
+					      struct snd_card *card);
+	const char 	*short_name;
+
+	void		*private_data;
+};
+
+/* structure for passing platform dependent data to the EAC driver */
+struct eac_platform_data {
+        int	(* init)(struct device *eac_dev);
+	void	(* cleanup)(struct device *eac_dev);
+	/* these callbacks are used to configure & control external MCLK
+	 * source. NULL if not used */
+	int	(* enable_ext_clocks)(struct device *eac_dev);
+	void	(* disable_ext_clocks)(struct device *eac_dev);
+};
+
+extern void omap_init_eac(struct eac_platform_data *pdata);
+
+extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec);
+extern void eac_unregister_codec(struct device *eac_dev);
+
+extern int eac_set_mode(struct device *eac_dev, int play, int rec);
+
+#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
new file mode 100644
index 0000000..d4e9043
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/plat-omap/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for OMAP-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/io.h>
+#include <mach/irqs.h>
+
+#if defined(CONFIG_ARCH_OMAP1)
+
+#if defined(CONFIG_ARCH_OMAP730) && \
+	(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
+#error "FIXME: OMAP730 doesn't support multiple-OMAP"
+#elif defined(CONFIG_ARCH_OMAP730)
+#define INT_IH2_IRQ		INT_730_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP15XX)
+#define INT_IH2_IRQ		INT_1510_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP16XX)
+#define INT_IH2_IRQ		INT_1610_IH2_IRQ
+#else
+#warning "IH2 IRQ defaulted"
+#define INT_IH2_IRQ		INT_1510_IH2_IRQ
+#endif
+
+ 		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =IO_ADDRESS(OMAP_IH1_BASE)
+		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
+		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
+		mov	\irqstat, #0xffffffff
+		bic	\tmp, \irqstat, \tmp
+		tst	\irqnr, \tmp
+		beq	1510f
+
+		ldr	\irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
+		cmp	\irqnr, #0
+		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+		cmpeq	\irqnr, #INT_IH2_IRQ
+		ldreq	\base, =IO_ADDRESS(OMAP_IH2_BASE)
+		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+		addeqs	\irqnr, \irqnr, #32
+1510:
+		.endm
+
+#elif defined(CONFIG_ARCH_OMAP24XX)
+
+#include <mach/omap24xx.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =OMAP2_VA_IC_BASE
+		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
+		cmp	\irqnr, #0x0
+		bne	2222f
+		ldr	\irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
+		cmp	\irqnr, #0x0
+		bne	2222f
+		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
+		cmp	\irqnr, #0x0
+2222:
+		ldrne	\irqnr, [\base, #IRQ_SIR_IRQ]
+
+		.endm
+
+		.macro	irq_prio_table
+		.endm
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/fpga.h b/arch/arm/plat-omap/include/mach/fpga.h
new file mode 100644
index 0000000..c92e4b4
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/fpga.h
@@ -0,0 +1,197 @@
+/*
+ * arch/arm/plat-omap/include/mach/fpga.h
+ *
+ * Interrupt handler for OMAP-1510 FPGA
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_FPGA_H
+#define __ASM_ARCH_OMAP_FPGA_H
+
+#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX)
+extern void omap1510_fpga_init_irq(void);
+#else
+#define omap1510_fpga_init_irq()	(0)
+#endif
+
+#define fpga_read(reg)			__raw_readb(reg)
+#define fpga_write(val, reg)		__raw_writeb(val, reg)
+
+/*
+ * ---------------------------------------------------------------------------
+ *  H2/P2 Debug board FPGA
+ * ---------------------------------------------------------------------------
+ */
+/* maps in the FPGA registers and the ETHR registers */
+#define H2P2_DBG_FPGA_BASE		0xE8000000	/* VA */
+#define H2P2_DBG_FPGA_SIZE		SZ_4K		/* SIZE */
+#define H2P2_DBG_FPGA_START		0x04000000	/* PA */
+
+#define H2P2_DBG_FPGA_ETHR_START	(H2P2_DBG_FPGA_START + 0x300)
+#define H2P2_DBG_FPGA_FPGA_REV		(H2P2_DBG_FPGA_BASE + 0x10)	/* FPGA Revision */
+#define H2P2_DBG_FPGA_BOARD_REV		(H2P2_DBG_FPGA_BASE + 0x12)	/* Board Revision */
+#define H2P2_DBG_FPGA_GPIO		(H2P2_DBG_FPGA_BASE + 0x14)	/* GPIO outputs */
+#define H2P2_DBG_FPGA_LEDS		(H2P2_DBG_FPGA_BASE + 0x16)	/* LEDs outputs */
+#define H2P2_DBG_FPGA_MISC_INPUTS	(H2P2_DBG_FPGA_BASE + 0x18)	/* Misc inputs */
+#define H2P2_DBG_FPGA_LAN_STATUS	(H2P2_DBG_FPGA_BASE + 0x1A)	/* LAN Status line */
+#define H2P2_DBG_FPGA_LAN_RESET		(H2P2_DBG_FPGA_BASE + 0x1C)	/* LAN Reset line */
+
+/* NOTE:  most boards don't have a static mapping for the FPGA ... */
+struct h2p2_dbg_fpga {
+	/* offset 0x00 */
+	u16		smc91x[8];
+	/* offset 0x10 */
+	u16		fpga_rev;
+	u16		board_rev;
+	u16		gpio_outputs;
+	u16		leds;
+	/* offset 0x18 */
+	u16		misc_inputs;
+	u16		lan_status;
+	u16		lan_reset;
+	u16		reserved0;
+	/* offset 0x20 */
+	u16		ps2_data;
+	u16		ps2_ctrl;
+	/* plus also 4 rs232 ports ... */
+};
+
+/* LEDs definition on debug board (16 LEDs, all physically green) */
+#define H2P2_DBG_FPGA_LED_GREEN		(1 << 15)
+#define H2P2_DBG_FPGA_LED_AMBER		(1 << 14)
+#define H2P2_DBG_FPGA_LED_RED		(1 << 13)
+#define H2P2_DBG_FPGA_LED_BLUE		(1 << 12)
+/*  cpu0 load-meter LEDs */
+#define H2P2_DBG_FPGA_LOAD_METER	(1 << 0)	// A bit of fun on our board ...
+#define H2P2_DBG_FPGA_LOAD_METER_SIZE	11
+#define H2P2_DBG_FPGA_LOAD_METER_MASK	((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
+
+#define H2P2_DBG_FPGA_P2_LED_TIMER		(1 << 0)
+#define H2P2_DBG_FPGA_P2_LED_IDLE		(1 << 1)
+
+/*
+ * ---------------------------------------------------------------------------
+ *  OMAP-1510 FPGA
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP1510_FPGA_BASE			0xE8000000	/* Virtual */
+#define OMAP1510_FPGA_SIZE			SZ_4K
+#define OMAP1510_FPGA_START			0x08000000	/* Physical */
+
+/* Revision */
+#define OMAP1510_FPGA_REV_LOW			(OMAP1510_FPGA_BASE + 0x0)
+#define OMAP1510_FPGA_REV_HIGH			(OMAP1510_FPGA_BASE + 0x1)
+
+#define OMAP1510_FPGA_LCD_PANEL_CONTROL		(OMAP1510_FPGA_BASE + 0x2)
+#define OMAP1510_FPGA_LED_DIGIT			(OMAP1510_FPGA_BASE + 0x3)
+#define INNOVATOR_FPGA_HID_SPI			(OMAP1510_FPGA_BASE + 0x4)
+#define OMAP1510_FPGA_POWER			(OMAP1510_FPGA_BASE + 0x5)
+
+/* Interrupt status */
+#define OMAP1510_FPGA_ISR_LO			(OMAP1510_FPGA_BASE + 0x6)
+#define OMAP1510_FPGA_ISR_HI			(OMAP1510_FPGA_BASE + 0x7)
+
+/* Interrupt mask */
+#define OMAP1510_FPGA_IMR_LO			(OMAP1510_FPGA_BASE + 0x8)
+#define OMAP1510_FPGA_IMR_HI			(OMAP1510_FPGA_BASE + 0x9)
+
+/* Reset registers */
+#define OMAP1510_FPGA_HOST_RESET		(OMAP1510_FPGA_BASE + 0xa)
+#define OMAP1510_FPGA_RST			(OMAP1510_FPGA_BASE + 0xb)
+
+#define OMAP1510_FPGA_AUDIO			(OMAP1510_FPGA_BASE + 0xc)
+#define OMAP1510_FPGA_DIP			(OMAP1510_FPGA_BASE + 0xe)
+#define OMAP1510_FPGA_FPGA_IO			(OMAP1510_FPGA_BASE + 0xf)
+#define OMAP1510_FPGA_UART1			(OMAP1510_FPGA_BASE + 0x14)
+#define OMAP1510_FPGA_UART2			(OMAP1510_FPGA_BASE + 0x15)
+#define OMAP1510_FPGA_OMAP1510_STATUS		(OMAP1510_FPGA_BASE + 0x16)
+#define OMAP1510_FPGA_BOARD_REV			(OMAP1510_FPGA_BASE + 0x18)
+#define OMAP1510P1_PPT_DATA			(OMAP1510_FPGA_BASE + 0x100)
+#define OMAP1510P1_PPT_STATUS			(OMAP1510_FPGA_BASE + 0x101)
+#define OMAP1510P1_PPT_CONTROL			(OMAP1510_FPGA_BASE + 0x102)
+
+#define OMAP1510_FPGA_TOUCHSCREEN		(OMAP1510_FPGA_BASE + 0x204)
+
+#define INNOVATOR_FPGA_INFO			(OMAP1510_FPGA_BASE + 0x205)
+#define INNOVATOR_FPGA_LCD_BRIGHT_LO		(OMAP1510_FPGA_BASE + 0x206)
+#define INNOVATOR_FPGA_LCD_BRIGHT_HI		(OMAP1510_FPGA_BASE + 0x207)
+#define INNOVATOR_FPGA_LED_GRN_LO		(OMAP1510_FPGA_BASE + 0x208)
+#define INNOVATOR_FPGA_LED_GRN_HI		(OMAP1510_FPGA_BASE + 0x209)
+#define INNOVATOR_FPGA_LED_RED_LO		(OMAP1510_FPGA_BASE + 0x20a)
+#define INNOVATOR_FPGA_LED_RED_HI		(OMAP1510_FPGA_BASE + 0x20b)
+#define INNOVATOR_FPGA_CAM_USB_CONTROL		(OMAP1510_FPGA_BASE + 0x20c)
+#define INNOVATOR_FPGA_EXP_CONTROL		(OMAP1510_FPGA_BASE + 0x20d)
+#define INNOVATOR_FPGA_ISR2			(OMAP1510_FPGA_BASE + 0x20e)
+#define INNOVATOR_FPGA_IMR2			(OMAP1510_FPGA_BASE + 0x210)
+
+#define OMAP1510_FPGA_ETHR_START		(OMAP1510_FPGA_START + 0x300)
+
+/*
+ * Power up Giga UART driver, turn on HID clock.
+ * Turn off BT power, since we're not using it and it
+ * draws power.
+ */
+#define OMAP1510_FPGA_RESET_VALUE		0x42
+
+#define OMAP1510_FPGA_PCR_IF_PD0		(1 << 7)
+#define OMAP1510_FPGA_PCR_COM2_EN		(1 << 6)
+#define OMAP1510_FPGA_PCR_COM1_EN		(1 << 5)
+#define OMAP1510_FPGA_PCR_EXP_PD0		(1 << 4)
+#define OMAP1510_FPGA_PCR_EXP_PD1		(1 << 3)
+#define OMAP1510_FPGA_PCR_48MHZ_CLK		(1 << 2)
+#define OMAP1510_FPGA_PCR_4MHZ_CLK		(1 << 1)
+#define OMAP1510_FPGA_PCR_RSRVD_BIT0		(1 << 0)
+
+/*
+ * Innovator/OMAP1510 FPGA HID register bit definitions
+ */
+#define OMAP1510_FPGA_HID_SCLK	(1<<0)	/* output */
+#define OMAP1510_FPGA_HID_MOSI	(1<<1)	/* output */
+#define OMAP1510_FPGA_HID_nSS	(1<<2)	/* output 0/1 chip idle/select */
+#define OMAP1510_FPGA_HID_nHSUS	(1<<3)	/* output 0/1 host active/suspended */
+#define OMAP1510_FPGA_HID_MISO	(1<<4)	/* input */
+#define OMAP1510_FPGA_HID_ATN	(1<<5)	/* input  0/1 chip idle/ATN */
+#define OMAP1510_FPGA_HID_rsrvd	(1<<6)
+#define OMAP1510_FPGA_HID_RESETn (1<<7)	/* output - 0/1 USAR reset/run */
+
+/* The FPGA IRQ is cascaded through GPIO_13 */
+#define OMAP1510_INT_FPGA		(IH_GPIO_BASE + 13)
+
+/* IRQ Numbers for interrupts muxed through the FPGA */
+#define OMAP1510_INT_FPGA_ATN		(OMAP_FPGA_IRQ_BASE + 0)
+#define OMAP1510_INT_FPGA_ACK		(OMAP_FPGA_IRQ_BASE + 1)
+#define OMAP1510_INT_FPGA2		(OMAP_FPGA_IRQ_BASE + 2)
+#define OMAP1510_INT_FPGA3		(OMAP_FPGA_IRQ_BASE + 3)
+#define OMAP1510_INT_FPGA4		(OMAP_FPGA_IRQ_BASE + 4)
+#define OMAP1510_INT_FPGA5		(OMAP_FPGA_IRQ_BASE + 5)
+#define OMAP1510_INT_FPGA6		(OMAP_FPGA_IRQ_BASE + 6)
+#define OMAP1510_INT_FPGA7		(OMAP_FPGA_IRQ_BASE + 7)
+#define OMAP1510_INT_FPGA8		(OMAP_FPGA_IRQ_BASE + 8)
+#define OMAP1510_INT_FPGA9		(OMAP_FPGA_IRQ_BASE + 9)
+#define OMAP1510_INT_FPGA10		(OMAP_FPGA_IRQ_BASE + 10)
+#define OMAP1510_INT_FPGA11		(OMAP_FPGA_IRQ_BASE + 11)
+#define OMAP1510_INT_FPGA12		(OMAP_FPGA_IRQ_BASE + 12)
+#define OMAP1510_INT_ETHER		(OMAP_FPGA_IRQ_BASE + 13)
+#define OMAP1510_INT_FPGAUART1		(OMAP_FPGA_IRQ_BASE + 14)
+#define OMAP1510_INT_FPGAUART2		(OMAP_FPGA_IRQ_BASE + 15)
+#define OMAP1510_INT_FPGA_TS		(OMAP_FPGA_IRQ_BASE + 16)
+#define OMAP1510_INT_FPGA17		(OMAP_FPGA_IRQ_BASE + 17)
+#define OMAP1510_INT_FPGA_CAM		(OMAP_FPGA_IRQ_BASE + 18)
+#define OMAP1510_INT_FPGA_RTC_A		(OMAP_FPGA_IRQ_BASE + 19)
+#define OMAP1510_INT_FPGA_RTC_B		(OMAP_FPGA_IRQ_BASE + 20)
+#define OMAP1510_INT_FPGA_CD		(OMAP_FPGA_IRQ_BASE + 21)
+#define OMAP1510_INT_FPGA22		(OMAP_FPGA_IRQ_BASE + 22)
+#define OMAP1510_INT_FPGA23		(OMAP_FPGA_IRQ_BASE + 23)
+
+#endif
diff --git a/include/asm-arm/arch-omap/gpio-switch.h b/arch/arm/plat-omap/include/mach/gpio-switch.h
similarity index 100%
rename from include/asm-arm/arch-omap/gpio-switch.h
rename to arch/arm/plat-omap/include/mach/gpio-switch.h
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
new file mode 100644
index 0000000..94ce278
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -0,0 +1,122 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpio.h
+ *
+ * OMAP GPIO handling defines and functions
+ *
+ * Copyright (C) 2003-2005 Nokia Corporation
+ *
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPIO_H
+#define __ASM_ARCH_OMAP_GPIO_H
+
+#include <mach/irqs.h>
+#include <asm/io.h>
+
+#define OMAP_MPUIO_BASE			(void __iomem *)0xfffb5000
+
+#ifdef CONFIG_ARCH_OMAP730
+#define OMAP_MPUIO_INPUT_LATCH		0x00
+#define OMAP_MPUIO_OUTPUT		0x02
+#define OMAP_MPUIO_IO_CNTL		0x04
+#define OMAP_MPUIO_KBR_LATCH		0x08
+#define OMAP_MPUIO_KBC			0x0a
+#define OMAP_MPUIO_GPIO_EVENT_MODE	0x0c
+#define OMAP_MPUIO_GPIO_INT_EDGE	0x0e
+#define OMAP_MPUIO_KBD_INT		0x10
+#define OMAP_MPUIO_GPIO_INT		0x12
+#define OMAP_MPUIO_KBD_MASKIT		0x14
+#define OMAP_MPUIO_GPIO_MASKIT		0x16
+#define OMAP_MPUIO_GPIO_DEBOUNCING	0x18
+#define OMAP_MPUIO_LATCH		0x1a
+#else
+#define OMAP_MPUIO_INPUT_LATCH		0x00
+#define OMAP_MPUIO_OUTPUT		0x04
+#define OMAP_MPUIO_IO_CNTL		0x08
+#define OMAP_MPUIO_KBR_LATCH		0x10
+#define OMAP_MPUIO_KBC			0x14
+#define OMAP_MPUIO_GPIO_EVENT_MODE	0x18
+#define OMAP_MPUIO_GPIO_INT_EDGE	0x1c
+#define OMAP_MPUIO_KBD_INT		0x20
+#define OMAP_MPUIO_GPIO_INT		0x24
+#define OMAP_MPUIO_KBD_MASKIT		0x28
+#define OMAP_MPUIO_GPIO_MASKIT		0x2c
+#define OMAP_MPUIO_GPIO_DEBOUNCING	0x30
+#define OMAP_MPUIO_LATCH		0x34
+#endif
+
+#define OMAP34XX_NR_GPIOS		6
+
+#define OMAP_MPUIO(nr)		(OMAP_MAX_GPIO_LINES + (nr))
+#define OMAP_GPIO_IS_MPUIO(nr)	((nr) >= OMAP_MAX_GPIO_LINES)
+
+#define OMAP_GPIO_IRQ(nr)	(OMAP_GPIO_IS_MPUIO(nr) ? \
+				 IH_MPUIO_BASE + ((nr) & 0x0f) : \
+				 IH_GPIO_BASE + (nr))
+
+extern int omap_gpio_init(void);	/* Call from board init only */
+extern int omap_request_gpio(int gpio);
+extern void omap_free_gpio(int gpio);
+extern void omap_set_gpio_direction(int gpio, int is_input);
+extern void omap_set_gpio_dataout(int gpio, int enable);
+extern int omap_get_gpio_datain(int gpio);
+extern void omap_set_gpio_debounce(int gpio, int enable);
+extern void omap_set_gpio_debounce_time(int gpio, int enable);
+
+/*-------------------------------------------------------------------------*/
+
+/* Wrappers for "new style" GPIO calls, using the new infrastructure
+ * which lets us plug in FPGA, I2C, and other implementations.
+ * *
+ * The original OMAP-specfic calls should eventually be removed.
+ */
+
+#include <linux/errno.h>
+#include <asm-generic/gpio.h>
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	if (gpio < (OMAP_MAX_GPIO_LINES + 16))
+		return OMAP_GPIO_IRQ(gpio);
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16)))
+		return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES;
+	return irq - IH_GPIO_BASE;
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/gpioexpander.h b/arch/arm/plat-omap/include/mach/gpioexpander.h
new file mode 100644
index 0000000..90444a0
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpioexpander.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpioexpander.h
+ *
+ *
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H
+#define __ASM_ARCH_OMAP_GPIOEXPANDER_H
+
+/* Function Prototypes for GPIO Expander functions */
+
+#ifdef CONFIG_GPIOEXPANDER_OMAP
+int read_gpio_expa(u8 *, int);
+int write_gpio_expa(u8 , int);
+#else
+static inline int read_gpio_expa(u8 *val, int addr)
+{
+	return 0;
+}
+static inline int write_gpio_expa(u8 val, int addr)
+{
+	return 0;
+}
+#endif
+
+#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */
diff --git a/include/asm-arm/arch-omap/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
similarity index 100%
rename from include/asm-arm/arch-omap/gpmc.h
rename to arch/arm/plat-omap/include/mach/gpmc.h
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
new file mode 100644
index 0000000..07f5d7f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -0,0 +1,355 @@
+/*
+ * arch/arm/plat-omap/include/mach/hardware.h
+ *
+ * Hardware definitions for TI OMAP processors and boards
+ *
+ * NOTE: Please put device driver specific defines into a separate header
+ *	 file for each driver.
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ *                          and Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_HARDWARE_H
+#define __ASM_ARCH_OMAP_HARDWARE_H
+
+#include <asm/sizes.h>
+#ifndef __ASSEMBLER__
+#include <asm/types.h>
+#include <mach/cpu.h>
+#endif
+#include <mach/serial.h>
+
+/*
+ * ---------------------------------------------------------------------------
+ * Common definitions for all OMAP processors
+ * NOTE: Put all processor or board specific parts to the special header
+ *	 files.
+ * ---------------------------------------------------------------------------
+ */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Timers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_MPU_TIMER1_BASE	(0xfffec500)
+#define OMAP_MPU_TIMER2_BASE	(0xfffec600)
+#define OMAP_MPU_TIMER3_BASE	(0xfffec700)
+#define MPU_TIMER_FREE		(1 << 6)
+#define MPU_TIMER_CLOCK_ENABLE	(1 << 5)
+#define MPU_TIMER_AR		(1 << 1)
+#define MPU_TIMER_ST		(1 << 0)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE		(0xfffece00)
+#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
+
+#define CK_RATEF		1
+#define CK_IDLEF		2
+#define CK_ENABLEF		4
+#define CK_SELECTF		8
+#define SETARM_IDLE_SHIFT
+
+/* DPLL control registers */
+#define DPLL_CTL		(0xfffecf00)
+
+/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
+#define DSP_CONFIG_REG_BASE     (0xe1008000)
+#define DSP_CKCTL		(DSP_CONFIG_REG_BASE + 0x0)
+#define DSP_IDLECT1		(DSP_CONFIG_REG_BASE + 0x4)
+#define DSP_IDLECT2		(DSP_CONFIG_REG_BASE + 0x8)
+#define DSP_RSTCT2		(DSP_CONFIG_REG_BASE + 0x14)
+
+/*
+ * ---------------------------------------------------------------------------
+ * UPLD
+ * ---------------------------------------------------------------------------
+ */
+#define ULPD_REG_BASE		(0xfffe0800)
+#define ULPD_IT_STATUS		(ULPD_REG_BASE + 0x14)
+#define ULPD_SETUP_ANALOG_CELL_3	(ULPD_REG_BASE + 0x24)
+#define ULPD_CLOCK_CTRL		(ULPD_REG_BASE + 0x30)
+#	define DIS_USB_PVCI_CLK		(1 << 5)	/* no USB/FAC synch */
+#	define USB_MCLK_EN		(1 << 4)	/* enable W4_USB_CLKO */
+#define ULPD_SOFT_REQ		(ULPD_REG_BASE + 0x34)
+#	define SOFT_UDC_REQ		(1 << 4)
+#	define SOFT_USB_CLK_REQ		(1 << 3)
+#	define SOFT_DPLL_REQ		(1 << 0)
+#define ULPD_DPLL_CTRL		(ULPD_REG_BASE + 0x3c)
+#define ULPD_STATUS_REQ		(ULPD_REG_BASE + 0x40)
+#define ULPD_APLL_CTRL		(ULPD_REG_BASE + 0x4c)
+#define ULPD_POWER_CTRL		(ULPD_REG_BASE + 0x50)
+#define ULPD_SOFT_DISABLE_REQ_REG	(ULPD_REG_BASE + 0x68)
+#	define DIS_MMC2_DPLL_REQ	(1 << 11)
+#	define DIS_MMC1_DPLL_REQ	(1 << 10)
+#	define DIS_UART3_DPLL_REQ	(1 << 9)
+#	define DIS_UART2_DPLL_REQ	(1 << 8)
+#	define DIS_UART1_DPLL_REQ	(1 << 7)
+#	define DIS_USB_HOST_DPLL_REQ	(1 << 6)
+#define ULPD_SDW_CLK_DIV_CTRL_SEL	(ULPD_REG_BASE + 0x74)
+#define ULPD_CAM_CLK_CTRL	(ULPD_REG_BASE + 0x7c)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* Watchdog timer within the OMAP3.2 gigacell */
+#define OMAP_MPU_WATCHDOG_BASE	(0xfffec800)
+#define OMAP_WDT_TIMER		(OMAP_MPU_WATCHDOG_BASE + 0x0)
+#define OMAP_WDT_LOAD_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_READ_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_TIMER_MODE	(OMAP_MPU_WATCHDOG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_ARCH_OMAP1
+
+/*
+ * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
+ * or something similar.. -- PFM.
+ */
+
+#define OMAP_IH1_BASE		0xfffecb00
+#define OMAP_IH2_BASE		0xfffe0000
+
+#define OMAP_IH1_ITR		(OMAP_IH1_BASE + 0x00)
+#define OMAP_IH1_MIR		(OMAP_IH1_BASE + 0x04)
+#define OMAP_IH1_SIR_IRQ	(OMAP_IH1_BASE + 0x10)
+#define OMAP_IH1_SIR_FIQ	(OMAP_IH1_BASE + 0x14)
+#define OMAP_IH1_CONTROL	(OMAP_IH1_BASE + 0x18)
+#define OMAP_IH1_ILR0		(OMAP_IH1_BASE + 0x1c)
+#define OMAP_IH1_ISR		(OMAP_IH1_BASE + 0x9c)
+
+#define OMAP_IH2_ITR		(OMAP_IH2_BASE + 0x00)
+#define OMAP_IH2_MIR		(OMAP_IH2_BASE + 0x04)
+#define OMAP_IH2_SIR_IRQ	(OMAP_IH2_BASE + 0x10)
+#define OMAP_IH2_SIR_FIQ	(OMAP_IH2_BASE + 0x14)
+#define OMAP_IH2_CONTROL	(OMAP_IH2_BASE + 0x18)
+#define OMAP_IH2_ILR0		(OMAP_IH2_BASE + 0x1c)
+#define OMAP_IH2_ISR		(OMAP_IH2_BASE + 0x9c)
+
+#define IRQ_ITR_REG_OFFSET	0x00
+#define IRQ_MIR_REG_OFFSET	0x04
+#define IRQ_SIR_IRQ_REG_OFFSET	0x10
+#define IRQ_SIR_FIQ_REG_OFFSET	0x14
+#define IRQ_CONTROL_REG_OFFSET	0x18
+#define IRQ_ISR_REG_OFFSET	0x9c
+#define IRQ_ILR0_REG_OFFSET	0x1c
+#define IRQ_GMR_REG_OFFSET	0xa0
+
+#endif
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define MOD_CONF_CTRL_0		0xfffe1080
+#define MOD_CONF_CTRL_1		0xfffe1110
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin multiplexing registers
+ * ----------------------------------------------------------------------------
+ */
+#define FUNC_MUX_CTRL_0		0xfffe1000
+#define FUNC_MUX_CTRL_1		0xfffe1004
+#define FUNC_MUX_CTRL_2		0xfffe1008
+#define COMP_MODE_CTRL_0	0xfffe100c
+#define FUNC_MUX_CTRL_3		0xfffe1010
+#define FUNC_MUX_CTRL_4		0xfffe1014
+#define FUNC_MUX_CTRL_5		0xfffe1018
+#define FUNC_MUX_CTRL_6		0xfffe101C
+#define FUNC_MUX_CTRL_7		0xfffe1020
+#define FUNC_MUX_CTRL_8		0xfffe1024
+#define FUNC_MUX_CTRL_9		0xfffe1028
+#define FUNC_MUX_CTRL_A		0xfffe102C
+#define FUNC_MUX_CTRL_B		0xfffe1030
+#define FUNC_MUX_CTRL_C		0xfffe1034
+#define FUNC_MUX_CTRL_D		0xfffe1038
+#define PULL_DWN_CTRL_0		0xfffe1040
+#define PULL_DWN_CTRL_1		0xfffe1044
+#define PULL_DWN_CTRL_2		0xfffe1048
+#define PULL_DWN_CTRL_3		0xfffe104c
+#define PULL_DWN_CTRL_4		0xfffe10ac
+
+/* OMAP-1610 specific multiplexing registers */
+#define FUNC_MUX_CTRL_E		0xfffe1090
+#define FUNC_MUX_CTRL_F		0xfffe1094
+#define FUNC_MUX_CTRL_10	0xfffe1098
+#define FUNC_MUX_CTRL_11	0xfffe109c
+#define FUNC_MUX_CTRL_12	0xfffe10a0
+#define PU_PD_SEL_0		0xfffe10b4
+#define PU_PD_SEL_1		0xfffe10b8
+#define PU_PD_SEL_2		0xfffe10bc
+#define PU_PD_SEL_3		0xfffe10c0
+#define PU_PD_SEL_4		0xfffe10c4
+
+/* Timer32K for 1610 and 1710*/
+#define OMAP_TIMER32K_BASE	0xFFFBC400
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_PUBLIC_CNTL_BASE		0xfffed300
+#define MPU_PUBLIC_TIPB_CNTL		(TIPB_PUBLIC_CNTL_BASE + 0x8)
+#define TIPB_PRIVATE_CNTL_BASE		0xfffeca00
+#define MPU_PRIVATE_TIPB_CNTL		(TIPB_PRIVATE_CNTL_BASE + 0x8)
+
+/*
+ * ----------------------------------------------------------------------------
+ * MPUI interface
+ * ----------------------------------------------------------------------------
+ */
+#define MPUI_BASE			(0xfffec900)
+#define MPUI_CTRL			(MPUI_BASE + 0x0)
+#define MPUI_DEBUG_ADDR			(MPUI_BASE + 0x4)
+#define MPUI_DEBUG_DATA			(MPUI_BASE + 0x8)
+#define MPUI_DEBUG_FLAG			(MPUI_BASE + 0xc)
+#define MPUI_STATUS_REG			(MPUI_BASE + 0x10)
+#define MPUI_DSP_STATUS			(MPUI_BASE + 0x14)
+#define MPUI_DSP_BOOT_CONFIG		(MPUI_BASE + 0x18)
+#define MPUI_DSP_API_CONFIG		(MPUI_BASE + 0x1c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * LED Pulse Generator
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_LPG1_BASE			0xfffbd000
+#define OMAP_LPG2_BASE			0xfffbd800
+#define OMAP_LPG1_LCR			(OMAP_LPG1_BASE + 0x00)
+#define OMAP_LPG1_PMR			(OMAP_LPG1_BASE + 0x04)
+#define OMAP_LPG2_LCR			(OMAP_LPG2_BASE + 0x00)
+#define OMAP_LPG2_PMR			(OMAP_LPG2_BASE + 0x04)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pulse-Width Light
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_PWL_BASE			0xfffb5800
+#define OMAP_PWL_ENABLE			(OMAP_PWL_BASE + 0x00)
+#define OMAP_PWL_CLK_ENABLE		(OMAP_PWL_BASE + 0x04)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Processor specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#include "omap730.h"
+#include "omap1510.h"
+#include "omap24xx.h"
+#include "omap16xx.h"
+#include "omap34xx.h"
+
+#ifndef __ASSEMBLER__
+
+/*
+ * ---------------------------------------------------------------------------
+ * Board specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#ifdef CONFIG_MACH_OMAP_INNOVATOR
+#include "board-innovator.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H2
+#include "board-h2.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#include "board-perseus2.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_FSAMPLE
+#include "board-fsample.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H3
+#include "board-h3.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H4
+#include "board-h4.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_2430SDP
+#include "board-2430sdp.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_APOLLON
+#include "board-apollon.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_OSK
+#include "board-osk.h"
+#endif
+
+#ifdef CONFIG_MACH_VOICEBLUE
+#include "board-voiceblue.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PALMTE
+#include "board-palmte.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PALMZ71
+#include "board-palmz71.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PALMTT
+#include "board-palmtt.h"
+#endif
+
+#ifdef CONFIG_MACH_SX1
+#include "board-sx1.h"
+#endif
+
+#endif /* !__ASSEMBLER__ */
+
+#endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/include/asm-arm/arch-omap/hwa742.h b/arch/arm/plat-omap/include/mach/hwa742.h
similarity index 100%
rename from include/asm-arm/arch-omap/hwa742.h
rename to arch/arm/plat-omap/include/mach/hwa742.h
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
new file mode 100644
index 0000000..2a30b7d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -0,0 +1,197 @@
+/*
+ * arch/arm/plat-omap/include/mach/io.h
+ *
+ * IO definitions for TI OMAP processors and boards
+ *
+ * Copied from arch/arm/mach-sa1100/include/mach/io.h
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Modifications:
+ *  06-12-1997	RMK	Created.
+ *  07-04-1999	RMK	Major cleanup
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
+#define __mem_pci(a)		(a)
+
+/*
+ * ----------------------------------------------------------------------------
+ * I/O mapping
+ * ----------------------------------------------------------------------------
+ */
+
+#define PCIO_BASE	0
+
+#if defined(CONFIG_ARCH_OMAP1)
+
+#define IO_PHYS		0xFFFB0000
+#define IO_OFFSET	0x01000000	/* Virtual IO = 0xfefb0000 */
+#define IO_SIZE		0x40000
+#define IO_VIRT		(IO_PHYS - IO_OFFSET)
+#define IO_ADDRESS(pa)	((pa) - IO_OFFSET)
+#define OMAP1_IO_ADDRESS(pa)	((pa) - IO_OFFSET)
+#define io_p2v(pa)	((pa) - IO_OFFSET)
+#define io_v2p(va)	((va) + IO_OFFSET)
+
+#elif defined(CONFIG_ARCH_OMAP2)
+
+/* We map both L3 and L4 on OMAP2 */
+#define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 */
+#define L3_24XX_VIRT	0xf8000000
+#define L3_24XX_SIZE	SZ_1M		/* 44kB of 128MB used, want 1MB sect */
+#define L4_24XX_PHYS	L4_24XX_BASE	/* 0x48000000 */
+#define L4_24XX_VIRT	0xd8000000
+#define L4_24XX_SIZE	SZ_1M		/* 1MB of 128MB used, want 1MB sect */
+
+#ifdef CONFIG_ARCH_OMAP2430
+#define L4_WK_243X_PHYS		L4_WK_243X_BASE		/* 0x49000000 */
+#define L4_WK_243X_VIRT		0xd9000000
+#define L4_WK_243X_SIZE		SZ_1M
+#define OMAP243X_GPMC_PHYS	OMAP243X_GPMC_BASE	/* 0x49000000 */
+#define OMAP243X_GPMC_VIRT	0xFE000000
+#define OMAP243X_GPMC_SIZE	SZ_1M
+#define OMAP243X_SDRC_PHYS	OMAP243X_SDRC_BASE
+#define OMAP243X_SDRC_VIRT	0xFD000000
+#define OMAP243X_SDRC_SIZE	SZ_1M
+#define OMAP243X_SMS_PHYS	OMAP243X_SMS_BASE
+#define OMAP243X_SMS_VIRT	0xFC000000
+#define OMAP243X_SMS_SIZE	SZ_1M
+
+#endif
+
+#define IO_OFFSET	0x90000000
+#define IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
+#define OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
+#define io_p2v(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
+#define io_v2p(va)	((va) - IO_OFFSET)	/* Works for L3 and L4 */
+
+/* DSP */
+#define DSP_MEM_24XX_PHYS	OMAP2420_DSP_MEM_BASE	/* 0x58000000 */
+#define DSP_MEM_24XX_VIRT	0xe0000000
+#define DSP_MEM_24XX_SIZE	0x28000
+#define DSP_IPI_24XX_PHYS	OMAP2420_DSP_IPI_BASE	/* 0x59000000 */
+#define DSP_IPI_24XX_VIRT	0xe1000000
+#define DSP_IPI_24XX_SIZE	SZ_4K
+#define DSP_MMU_24XX_PHYS	OMAP2420_DSP_MMU_BASE	/* 0x5a000000 */
+#define DSP_MMU_24XX_VIRT	0xe2000000
+#define DSP_MMU_24XX_SIZE	SZ_4K
+
+#elif defined(CONFIG_ARCH_OMAP3)
+
+/* We map both L3 and L4 on OMAP3 */
+#define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 */
+#define L3_34XX_VIRT		0xf8000000
+#define L3_34XX_SIZE		SZ_1M   /* 44kB of 128MB used, want 1MB sect */
+
+#define L4_34XX_PHYS		L4_34XX_BASE	/* 0x48000000 */
+#define L4_34XX_VIRT		0xd8000000
+#define L4_34XX_SIZE		SZ_4M   /* 1MB of 128MB used, want 1MB sect */
+
+/*
+ * Need to look at the Size 4M for L4.
+ * VPOM3430 was not working for Int controller
+ */
+
+#define L4_WK_34XX_PHYS		L4_WK_34XX_BASE /* 0x48300000 */
+#define L4_WK_34XX_VIRT		0xd8300000
+#define L4_WK_34XX_SIZE		SZ_1M
+
+#define L4_PER_34XX_PHYS	L4_PER_34XX_BASE /* 0x49000000 */
+#define L4_PER_34XX_VIRT	0xd9000000
+#define L4_PER_34XX_SIZE	SZ_1M
+
+#define L4_EMU_34XX_PHYS	L4_EMU_34XX_BASE /* 0x54000000 */
+#define L4_EMU_34XX_VIRT	0xe4000000
+#define L4_EMU_34XX_SIZE	SZ_64M
+
+#define OMAP34XX_GPMC_PHYS	OMAP34XX_GPMC_BASE /* 0x6E000000 */
+#define OMAP34XX_GPMC_VIRT	0xFE000000
+#define OMAP34XX_GPMC_SIZE	SZ_1M
+
+#define OMAP343X_SMS_PHYS	OMAP343X_SMS_BASE /* 0x6C000000 */
+#define OMAP343X_SMS_VIRT	0xFC000000
+#define OMAP343X_SMS_SIZE	SZ_1M
+
+#define OMAP343X_SDRC_PHYS	OMAP343X_SDRC_BASE /* 0x6D000000 */
+#define OMAP343X_SDRC_VIRT	0xFD000000
+#define OMAP343X_SDRC_SIZE	SZ_1M
+
+
+#define IO_OFFSET		0x90000000
+#define IO_ADDRESS(pa)		((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_p2v(pa)		((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_v2p(va)		((va) - IO_OFFSET)/* Works for L3 and L4 */
+
+/* DSP */
+#define DSP_MEM_34XX_PHYS	OMAP34XX_DSP_MEM_BASE	/* 0x58000000 */
+#define DSP_MEM_34XX_VIRT	0xe0000000
+#define DSP_MEM_34XX_SIZE	0x28000
+#define DSP_IPI_34XX_PHYS	OMAP34XX_DSP_IPI_BASE	/* 0x59000000 */
+#define DSP_IPI_34XX_VIRT	0xe1000000
+#define DSP_IPI_34XX_SIZE	SZ_4K
+#define DSP_MMU_34XX_PHYS	OMAP34XX_DSP_MMU_BASE	/* 0x5a000000 */
+#define DSP_MMU_34XX_VIRT	0xe2000000
+#define DSP_MMU_34XX_SIZE	SZ_4K
+
+#endif
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Functions to access the OMAP IO region
+ *
+ * NOTE: - Use omap_read/write[bwl] for physical register addresses
+ *	 - Use __raw_read/write[bwl]() for virtual register addresses
+ *	 - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
+ *	 - DO NOT use hardcoded virtual addresses to allow changing the
+ *	   IO address space again if needed
+ */
+#define omap_readb(a)		(*(volatile unsigned char  *)IO_ADDRESS(a))
+#define omap_readw(a)		(*(volatile unsigned short *)IO_ADDRESS(a))
+#define omap_readl(a)		(*(volatile unsigned int   *)IO_ADDRESS(a))
+
+#define omap_writeb(v,a)	(*(volatile unsigned char  *)IO_ADDRESS(a) = (v))
+#define omap_writew(v,a)	(*(volatile unsigned short *)IO_ADDRESS(a) = (v))
+#define omap_writel(v,a)	(*(volatile unsigned int   *)IO_ADDRESS(a) = (v))
+
+extern void omap1_map_common_io(void);
+extern void omap1_init_common_hw(void);
+
+extern void omap2_map_common_io(void);
+extern void omap2_init_common_hw(void);
+
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/mach/irda.h
new file mode 100644
index 0000000..8372a00
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/irda.h
@@ -0,0 +1,37 @@
+/*
+ *  arch/arm/plat-omap/include/mach/irda.h
+ *
+ *  Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_SEL		1	/* Selects IrDA */
+#define IR_SIRMODE	2
+#define IR_FIRMODE	4
+#define IR_MIRMODE	8
+
+struct omap_irda_config {
+	int transceiver_cap;
+	int (*transceiver_mode)(struct device *dev, int mode);
+	int (*select_irda)(struct device *dev, int state);
+	/* Very specific to the needs of some platforms (h3,h4)
+	 * having calls which can sleep in irda_set_speed.
+	 */
+	struct delayed_work gpio_expa;
+	int rx_channel;
+	int tx_channel;
+	unsigned long dest_start;
+	unsigned long src_start;
+	int tx_trigger;
+	int rx_trigger;
+	int mode;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
new file mode 100644
index 0000000..17248bb
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -0,0 +1,332 @@
+/*
+ *  arch/arm/plat-omap/include/mach/irqs.h
+ *
+ *  Copyright (C) Greg Lonnon 2001
+ *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
+ *	 are different.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
+
+/*
+ * IRQ numbers for interrupt handler 1
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ *
+ */
+#define INT_CAMERA		1
+#define INT_FIQ			3
+#define INT_RTDX		6
+#define INT_DSP_MMU_ABORT	7
+#define INT_HOST		8
+#define INT_ABORT		9
+#define INT_BRIDGE_PRIV		13
+#define INT_GPIO_BANK1		14
+#define INT_UART3		15
+#define INT_TIMER3		16
+#define INT_DMA_CH0_6		19
+#define INT_DMA_CH1_7		20
+#define INT_DMA_CH2_8		21
+#define INT_DMA_CH3		22
+#define INT_DMA_CH4		23
+#define INT_DMA_CH5		24
+#define INT_DMA_LCD		25
+#define INT_TIMER1		26
+#define INT_WD_TIMER		27
+#define INT_BRIDGE_PUB		28
+#define INT_TIMER2		30
+#define INT_LCD_CTRL		31
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1510_IH2_IRQ	0
+#define INT_1510_RES2		2
+#define INT_1510_SPI_TX		4
+#define INT_1510_SPI_RX		5
+#define INT_1510_DSP_MAILBOX1	10
+#define INT_1510_DSP_MAILBOX2	11
+#define INT_1510_RES12		12
+#define INT_1510_LB_MMU		17
+#define INT_1510_RES18		18
+#define INT_1510_LOCAL_BUS	29
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1610_IH2_IRQ	0
+#define INT_1610_IH2_FIQ	2
+#define INT_1610_McBSP2_TX	4
+#define INT_1610_McBSP2_RX	5
+#define INT_1610_DSP_MAILBOX1	10
+#define INT_1610_DSP_MAILBOX2	11
+#define INT_1610_LCD_LINE	12
+#define INT_1610_GPTIMER1	17
+#define INT_1610_GPTIMER2	18
+#define INT_1610_SSR_FIFO_0	29
+
+/*
+ * OMAP-730 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_730_IH2_FIQ		0
+#define INT_730_IH2_IRQ		1
+#define INT_730_USB_NON_ISO	2
+#define INT_730_USB_ISO		3
+#define INT_730_ICR		4
+#define INT_730_EAC		5
+#define INT_730_GPIO_BANK1	6
+#define INT_730_GPIO_BANK2	7
+#define INT_730_GPIO_BANK3	8
+#define INT_730_McBSP2TX	10
+#define INT_730_McBSP2RX	11
+#define INT_730_McBSP2RX_OVF	12
+#define INT_730_LCD_LINE	14
+#define INT_730_GSM_PROTECT	15
+#define INT_730_TIMER3		16
+#define INT_730_GPIO_BANK5	17
+#define INT_730_GPIO_BANK6	18
+#define INT_730_SPGIO_WR	29
+
+/*
+ * IRQ numbers for interrupt handler 2
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ */
+#define IH2_BASE		32
+
+#define INT_KEYBOARD		(1 + IH2_BASE)
+#define INT_uWireTX		(2 + IH2_BASE)
+#define INT_uWireRX		(3 + IH2_BASE)
+#define INT_I2C			(4 + IH2_BASE)
+#define INT_MPUIO		(5 + IH2_BASE)
+#define INT_USB_HHC_1		(6 + IH2_BASE)
+#define INT_McBSP3TX		(10 + IH2_BASE)
+#define INT_McBSP3RX		(11 + IH2_BASE)
+#define INT_McBSP1TX		(12 + IH2_BASE)
+#define INT_McBSP1RX		(13 + IH2_BASE)
+#define INT_UART1		(14 + IH2_BASE)
+#define INT_UART2		(15 + IH2_BASE)
+#define INT_BT_MCSI1TX		(16 + IH2_BASE)
+#define INT_BT_MCSI1RX		(17 + IH2_BASE)
+#define INT_USB_W2FC		(20 + IH2_BASE)
+#define INT_1WIRE		(21 + IH2_BASE)
+#define INT_OS_TIMER		(22 + IH2_BASE)
+#define INT_MMC			(23 + IH2_BASE)
+#define INT_GAUGE_32K		(24 + IH2_BASE)
+#define INT_RTC_TIMER		(25 + IH2_BASE)
+#define INT_RTC_ALARM		(26 + IH2_BASE)
+#define INT_MEM_STICK		(27 + IH2_BASE)
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1510_DSP_MMU	(28 + IH2_BASE)
+#define INT_1510_COM_SPI_RO	(31 + IH2_BASE)
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1610_FAC		(0 + IH2_BASE)
+#define INT_1610_USB_HHC_2	(7 + IH2_BASE)
+#define INT_1610_USB_OTG	(8 + IH2_BASE)
+#define INT_1610_SoSSI		(9 + IH2_BASE)
+#define INT_1610_SoSSI_MATCH	(19 + IH2_BASE)
+#define INT_1610_DSP_MMU	(28 + IH2_BASE)
+#define INT_1610_McBSP2RX_OF	(31 + IH2_BASE)
+#define INT_1610_STI		(32 + IH2_BASE)
+#define INT_1610_STI_WAKEUP	(33 + IH2_BASE)
+#define INT_1610_GPTIMER3	(34 + IH2_BASE)
+#define INT_1610_GPTIMER4	(35 + IH2_BASE)
+#define INT_1610_GPTIMER5	(36 + IH2_BASE)
+#define INT_1610_GPTIMER6	(37 + IH2_BASE)
+#define INT_1610_GPTIMER7	(38 + IH2_BASE)
+#define INT_1610_GPTIMER8	(39 + IH2_BASE)
+#define INT_1610_GPIO_BANK2	(40 + IH2_BASE)
+#define INT_1610_GPIO_BANK3	(41 + IH2_BASE)
+#define INT_1610_MMC2		(42 + IH2_BASE)
+#define INT_1610_CF		(43 + IH2_BASE)
+#define INT_1610_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_1610_GPIO_BANK4	(48 + IH2_BASE)
+#define INT_1610_SPI		(49 + IH2_BASE)
+#define INT_1610_DMA_CH6	(53 + IH2_BASE)
+#define INT_1610_DMA_CH7	(54 + IH2_BASE)
+#define INT_1610_DMA_CH8	(55 + IH2_BASE)
+#define INT_1610_DMA_CH9	(56 + IH2_BASE)
+#define INT_1610_DMA_CH10	(57 + IH2_BASE)
+#define INT_1610_DMA_CH11	(58 + IH2_BASE)
+#define INT_1610_DMA_CH12	(59 + IH2_BASE)
+#define INT_1610_DMA_CH13	(60 + IH2_BASE)
+#define INT_1610_DMA_CH14	(61 + IH2_BASE)
+#define INT_1610_DMA_CH15	(62 + IH2_BASE)
+#define INT_1610_NAND		(63 + IH2_BASE)
+
+/*
+ * OMAP-730 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_730_HW_ERRORS	(0 + IH2_BASE)
+#define INT_730_NFIQ_PWR_FAIL	(1 + IH2_BASE)
+#define INT_730_CFCD		(2 + IH2_BASE)
+#define INT_730_CFIREQ		(3 + IH2_BASE)
+#define INT_730_I2C		(4 + IH2_BASE)
+#define INT_730_PCC		(5 + IH2_BASE)
+#define INT_730_MPU_EXT_NIRQ	(6 + IH2_BASE)
+#define INT_730_SPI_100K_1	(7 + IH2_BASE)
+#define INT_730_SYREN_SPI	(8 + IH2_BASE)
+#define INT_730_VLYNQ		(9 + IH2_BASE)
+#define INT_730_GPIO_BANK4	(10 + IH2_BASE)
+#define INT_730_McBSP1TX	(11 + IH2_BASE)
+#define INT_730_McBSP1RX	(12 + IH2_BASE)
+#define INT_730_McBSP1RX_OF	(13 + IH2_BASE)
+#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_730_UART_MODEM_1	(15 + IH2_BASE)
+#define INT_730_MCSI		(16 + IH2_BASE)
+#define INT_730_uWireTX		(17 + IH2_BASE)
+#define INT_730_uWireRX		(18 + IH2_BASE)
+#define INT_730_SMC_CD		(19 + IH2_BASE)
+#define INT_730_SMC_IREQ	(20 + IH2_BASE)
+#define INT_730_HDQ_1WIRE	(21 + IH2_BASE)
+#define INT_730_TIMER32K	(22 + IH2_BASE)
+#define INT_730_MMC_SDIO	(23 + IH2_BASE)
+#define INT_730_UPLD		(24 + IH2_BASE)
+#define INT_730_USB_HHC_1	(27 + IH2_BASE)
+#define INT_730_USB_HHC_2	(28 + IH2_BASE)
+#define INT_730_USB_GENI	(29 + IH2_BASE)
+#define INT_730_USB_OTG		(30 + IH2_BASE)
+#define INT_730_CAMERA_IF	(31 + IH2_BASE)
+#define INT_730_RNG		(32 + IH2_BASE)
+#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_730_DBB_RF_EN	(34 + IH2_BASE)
+#define INT_730_MPUIO_KEYPAD	(35 + IH2_BASE)
+#define INT_730_SHA1_MD5	(36 + IH2_BASE)
+#define INT_730_SPI_100K_2	(37 + IH2_BASE)
+#define INT_730_RNG_IDLE	(38 + IH2_BASE)
+#define INT_730_MPUIO		(39 + IH2_BASE)
+#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
+#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_730_LLPC_OE_RISING	(42 + IH2_BASE)
+#define INT_730_LLPC_VSYNC	(43 + IH2_BASE)
+#define INT_730_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_730_DMA_CH6		(53 + IH2_BASE)
+#define INT_730_DMA_CH7		(54 + IH2_BASE)
+#define INT_730_DMA_CH8		(55 + IH2_BASE)
+#define INT_730_DMA_CH9		(56 + IH2_BASE)
+#define INT_730_DMA_CH10	(57 + IH2_BASE)
+#define INT_730_DMA_CH11	(58 + IH2_BASE)
+#define INT_730_DMA_CH12	(59 + IH2_BASE)
+#define INT_730_DMA_CH13	(60 + IH2_BASE)
+#define INT_730_DMA_CH14	(61 + IH2_BASE)
+#define INT_730_DMA_CH15	(62 + IH2_BASE)
+#define INT_730_NAND		(63 + IH2_BASE)
+
+#define INT_24XX_SYS_NIRQ	7
+#define INT_24XX_SDMA_IRQ0	12
+#define INT_24XX_SDMA_IRQ1	13
+#define INT_24XX_SDMA_IRQ2	14
+#define INT_24XX_SDMA_IRQ3	15
+#define INT_24XX_CAM_IRQ	24
+#define INT_24XX_DSS_IRQ	25
+#define INT_24XX_MAIL_U0_MPU	26
+#define INT_24XX_DSP_UMA	27
+#define INT_24XX_DSP_MMU	28
+#define INT_24XX_GPIO_BANK1	29
+#define INT_24XX_GPIO_BANK2	30
+#define INT_24XX_GPIO_BANK3	31
+#define INT_24XX_GPIO_BANK4	32
+#define INT_24XX_GPIO_BANK5	33
+#define INT_24XX_MAIL_U3_MPU	34
+#define INT_24XX_GPTIMER1	37
+#define INT_24XX_GPTIMER2	38
+#define INT_24XX_GPTIMER3	39
+#define INT_24XX_GPTIMER4	40
+#define INT_24XX_GPTIMER5	41
+#define INT_24XX_GPTIMER6	42
+#define INT_24XX_GPTIMER7	43
+#define INT_24XX_GPTIMER8	44
+#define INT_24XX_GPTIMER9	45
+#define INT_24XX_GPTIMER10	46
+#define INT_24XX_GPTIMER11	47
+#define INT_24XX_GPTIMER12	48
+#define INT_24XX_I2C1_IRQ	56
+#define INT_24XX_I2C2_IRQ	57
+#define INT_24XX_MCBSP1_IRQ_TX	59
+#define INT_24XX_MCBSP1_IRQ_RX	60
+#define INT_24XX_MCBSP2_IRQ_TX	62
+#define INT_24XX_MCBSP2_IRQ_RX	63
+#define INT_24XX_UART1_IRQ	72
+#define INT_24XX_UART2_IRQ	73
+#define INT_24XX_UART3_IRQ	74
+#define INT_24XX_USB_IRQ_GEN	75
+#define INT_24XX_USB_IRQ_NISO	76
+#define INT_24XX_USB_IRQ_ISO	77
+#define INT_24XX_USB_IRQ_HGEN	78
+#define INT_24XX_USB_IRQ_HSOF	79
+#define INT_24XX_USB_IRQ_OTG	80
+#define INT_24XX_MMC_IRQ	83
+
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
+ * 16 MPUIO lines */
+#define OMAP_MAX_GPIO_LINES	192
+#define IH_GPIO_BASE		(128 + IH2_BASE)
+#define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
+#define OMAP_IRQ_END		(IH_MPUIO_BASE + 16)
+
+/* External FPGA handles interrupts on Innovator boards */
+#define	OMAP_FPGA_IRQ_BASE	(OMAP_IRQ_END)
+#ifdef	CONFIG_MACH_OMAP_INNOVATOR
+#define OMAP_FPGA_NR_IRQS	24
+#else
+#define OMAP_FPGA_NR_IRQS	0
+#endif
+#define OMAP_FPGA_IRQ_END	(OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
+
+/* External TWL4030 can handle interrupts on 2430 and 34xx boards */
+#define	TWL4030_IRQ_BASE	(OMAP_FPGA_IRQ_END)
+#ifdef	CONFIG_TWL4030_CORE
+#define	TWL4030_BASE_NR_IRQS	8
+#define	TWL4030_PWR_NR_IRQS	8
+#else
+#define	TWL4030_BASE_NR_IRQS	0
+#define	TWL4030_PWR_NR_IRQS	0
+#endif
+#define TWL4030_IRQ_END		(TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS)
+#define TWL4030_PWR_IRQ_BASE	TWL4030_IRQ_END
+#define	TWL4030_PWR_IRQ_END	(TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS)
+
+/* External TWL4030 gpio interrupts are optional */
+#define TWL4030_GPIO_IRQ_BASE	TWL4030_PWR_IRQ_END
+#ifdef	CONFIG_TWL4030_GPIO
+#define TWL4030_GPIO_NR_IRQS	18
+#else
+#define	TWL4030_GPIO_NR_IRQS	0
+#endif
+#define TWL4030_GPIO_IRQ_END	(TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
+
+/* Total number of interrupts depends on the enabled blocks above */
+#define NR_IRQS			TWL4030_GPIO_IRQ_END
+
+#define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
+
+#ifndef __ASSEMBLY__
+extern void omap_init_irq(void);
+#endif
+
+#include <mach/hardware.h>
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
new file mode 100644
index 0000000..232923a
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/plat-omap/include/mach/keypad.h
+ *
+ *  Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_KEYPAD_H
+#define ASMARM_ARCH_KEYPAD_H
+
+struct omap_kp_platform_data {
+	int rows;
+	int cols;
+	int *keymap;
+	unsigned int keymapsize;
+	unsigned int rep:1;
+	unsigned long delay;
+	unsigned int dbounce:1;
+	/* specific to OMAP242x*/
+	unsigned int *row_gpios;
+	unsigned int *col_gpios;
+};
+
+/* Group (0..3) -- when multiple keys are pressed, only the
+ * keys pressed in the same group are considered as pressed. This is
+ * in order to workaround certain crappy HW designs that produce ghost
+ * keypresses. */
+#define GROUP_0		(0 << 16)
+#define GROUP_1		(1 << 16)
+#define GROUP_2		(2 << 16)
+#define GROUP_3		(3 << 16)
+#define GROUP_MASK	GROUP_3
+
+#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
+
+#endif
+
diff --git a/include/asm-arm/arch-omap/lcd_mipid.h b/arch/arm/plat-omap/include/mach/lcd_mipid.h
similarity index 100%
rename from include/asm-arm/arch-omap/lcd_mipid.h
rename to arch/arm/plat-omap/include/mach/lcd_mipid.h
diff --git a/arch/arm/plat-omap/include/mach/led.h b/arch/arm/plat-omap/include/mach/led.h
new file mode 100644
index 0000000..25e451e
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/led.h
@@ -0,0 +1,24 @@
+/*
+ *  arch/arm/plat-omap/include/mach/led.h
+ *
+ *  Copyright (C) 2006 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_LED_H
+#define ASMARM_ARCH_LED_H
+
+struct omap_led_config {
+	struct led_classdev	cdev;
+	s16			gpio;
+};
+
+struct omap_led_platform_data {
+	s16			nr_leds;
+	struct omap_led_config	*leds;
+};
+
+#endif
diff --git a/include/asm-arm/arch-omap/mailbox.h b/arch/arm/plat-omap/include/mach/mailbox.h
similarity index 100%
rename from include/asm-arm/arch-omap/mailbox.h
rename to arch/arm/plat-omap/include/mach/mailbox.h
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
new file mode 100644
index 0000000..6eb44a9
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -0,0 +1,380 @@
+/*
+ * arch/arm/plat-omap/include/mach/mcbsp.h
+ *
+ * Defines for Multi-Channel Buffered Serial Port
+ *
+ * Copyright (C) 2002 RidgeRun, Inc.
+ * Author: Steve Johnson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __ASM_ARCH_OMAP_MCBSP_H
+#define __ASM_ARCH_OMAP_MCBSP_H
+
+#include <linux/completion.h>
+#include <linux/spinlock.h>
+
+#include <mach/hardware.h>
+#include <mach/clock.h>
+
+#define OMAP730_MCBSP1_BASE	0xfffb1000
+#define OMAP730_MCBSP2_BASE	0xfffb1800
+
+#define OMAP1510_MCBSP1_BASE	0xe1011800
+#define OMAP1510_MCBSP2_BASE	0xfffb1000
+#define OMAP1510_MCBSP3_BASE	0xe1017000
+
+#define OMAP1610_MCBSP1_BASE	0xe1011800
+#define OMAP1610_MCBSP2_BASE	0xfffb1000
+#define OMAP1610_MCBSP3_BASE	0xe1017000
+
+#define OMAP24XX_MCBSP1_BASE	0x48074000
+#define OMAP24XX_MCBSP2_BASE	0x48076000
+
+#define OMAP34XX_MCBSP1_BASE	0x48074000
+#define OMAP34XX_MCBSP2_BASE	0x49022000
+
+#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
+
+#define OMAP_MCBSP_REG_DRR2	0x00
+#define OMAP_MCBSP_REG_DRR1	0x02
+#define OMAP_MCBSP_REG_DXR2	0x04
+#define OMAP_MCBSP_REG_DXR1	0x06
+#define OMAP_MCBSP_REG_SPCR2	0x08
+#define OMAP_MCBSP_REG_SPCR1	0x0a
+#define OMAP_MCBSP_REG_RCR2	0x0c
+#define OMAP_MCBSP_REG_RCR1	0x0e
+#define OMAP_MCBSP_REG_XCR2	0x10
+#define OMAP_MCBSP_REG_XCR1	0x12
+#define OMAP_MCBSP_REG_SRGR2	0x14
+#define OMAP_MCBSP_REG_SRGR1	0x16
+#define OMAP_MCBSP_REG_MCR2	0x18
+#define OMAP_MCBSP_REG_MCR1	0x1a
+#define OMAP_MCBSP_REG_RCERA	0x1c
+#define OMAP_MCBSP_REG_RCERB	0x1e
+#define OMAP_MCBSP_REG_XCERA	0x20
+#define OMAP_MCBSP_REG_XCERB	0x22
+#define OMAP_MCBSP_REG_PCR0	0x24
+#define OMAP_MCBSP_REG_RCERC	0x26
+#define OMAP_MCBSP_REG_RCERD	0x28
+#define OMAP_MCBSP_REG_XCERC	0x2A
+#define OMAP_MCBSP_REG_XCERD	0x2C
+#define OMAP_MCBSP_REG_RCERE	0x2E
+#define OMAP_MCBSP_REG_RCERF	0x30
+#define OMAP_MCBSP_REG_XCERE	0x32
+#define OMAP_MCBSP_REG_XCERF	0x34
+#define OMAP_MCBSP_REG_RCERG	0x36
+#define OMAP_MCBSP_REG_RCERH	0x38
+#define OMAP_MCBSP_REG_XCERG	0x3A
+#define OMAP_MCBSP_REG_XCERH	0x3C
+
+#define OMAP_MAX_MCBSP_COUNT	3
+#define MAX_MCBSP_CLOCKS	3
+
+#define AUDIO_MCBSP_DATAWRITE	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
+#define AUDIO_MCBSP_DATAREAD	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
+
+#define AUDIO_MCBSP		OMAP_MCBSP1
+#define AUDIO_DMA_TX		OMAP_DMA_MCBSP1_TX
+#define AUDIO_DMA_RX		OMAP_DMA_MCBSP1_RX
+
+#elif defined(CONFIG_ARCH_OMAP24XX)
+
+#define OMAP_MCBSP_REG_DRR2	0x00
+#define OMAP_MCBSP_REG_DRR1	0x04
+#define OMAP_MCBSP_REG_DXR2	0x08
+#define OMAP_MCBSP_REG_DXR1	0x0C
+#define OMAP_MCBSP_REG_SPCR2	0x10
+#define OMAP_MCBSP_REG_SPCR1	0x14
+#define OMAP_MCBSP_REG_RCR2	0x18
+#define OMAP_MCBSP_REG_RCR1	0x1C
+#define OMAP_MCBSP_REG_XCR2	0x20
+#define OMAP_MCBSP_REG_XCR1	0x24
+#define OMAP_MCBSP_REG_SRGR2	0x28
+#define OMAP_MCBSP_REG_SRGR1	0x2C
+#define OMAP_MCBSP_REG_MCR2	0x30
+#define OMAP_MCBSP_REG_MCR1	0x34
+#define OMAP_MCBSP_REG_RCERA	0x38
+#define OMAP_MCBSP_REG_RCERB	0x3C
+#define OMAP_MCBSP_REG_XCERA	0x40
+#define OMAP_MCBSP_REG_XCERB	0x44
+#define OMAP_MCBSP_REG_PCR0	0x48
+#define OMAP_MCBSP_REG_RCERC	0x4C
+#define OMAP_MCBSP_REG_RCERD	0x50
+#define OMAP_MCBSP_REG_XCERC	0x54
+#define OMAP_MCBSP_REG_XCERD	0x58
+#define OMAP_MCBSP_REG_RCERE	0x5C
+#define OMAP_MCBSP_REG_RCERF	0x60
+#define OMAP_MCBSP_REG_XCERE	0x64
+#define OMAP_MCBSP_REG_XCERF	0x68
+#define OMAP_MCBSP_REG_RCERG	0x6C
+#define OMAP_MCBSP_REG_RCERH	0x70
+#define OMAP_MCBSP_REG_XCERG	0x74
+#define OMAP_MCBSP_REG_XCERH	0x78
+
+#define OMAP_MAX_MCBSP_COUNT	2
+#define MAX_MCBSP_CLOCKS	2
+
+#define AUDIO_MCBSP_DATAWRITE	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
+#define AUDIO_MCBSP_DATAREAD	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
+
+#define AUDIO_MCBSP		OMAP_MCBSP2
+#define AUDIO_DMA_TX		OMAP24XX_DMA_MCBSP2_TX
+#define AUDIO_DMA_RX		OMAP24XX_DMA_MCBSP2_RX
+
+#endif
+
+#define OMAP_MCBSP_READ(base, reg)		__raw_readw((base) + OMAP_MCBSP_REG_##reg)
+#define OMAP_MCBSP_WRITE(base, reg, val)	__raw_writew((val), (base) + OMAP_MCBSP_REG_##reg)
+
+
+/************************** McBSP SPCR1 bit definitions ***********************/
+#define RRST			0x0001
+#define RRDY			0x0002
+#define RFULL			0x0004
+#define RSYNC_ERR		0x0008
+#define RINTM(value)		((value)<<4)	/* bits 4:5 */
+#define ABIS			0x0040
+#define DXENA			0x0080
+#define CLKSTP(value)		((value)<<11)	/* bits 11:12 */
+#define RJUST(value)		((value)<<13)	/* bits 13:14 */
+#define DLB			0x8000
+
+/************************** McBSP SPCR2 bit definitions ***********************/
+#define XRST		0x0001
+#define XRDY		0x0002
+#define XEMPTY		0x0004
+#define XSYNC_ERR	0x0008
+#define XINTM(value)	((value)<<4)		/* bits 4:5 */
+#define GRST		0x0040
+#define FRST		0x0080
+#define SOFT		0x0100
+#define FREE		0x0200
+
+/************************** McBSP PCR bit definitions *************************/
+#define CLKRP		0x0001
+#define CLKXP		0x0002
+#define FSRP		0x0004
+#define FSXP		0x0008
+#define DR_STAT		0x0010
+#define DX_STAT		0x0020
+#define CLKS_STAT	0x0040
+#define SCLKME		0x0080
+#define CLKRM		0x0100
+#define CLKXM		0x0200
+#define FSRM		0x0400
+#define FSXM		0x0800
+#define RIOEN		0x1000
+#define XIOEN		0x2000
+#define IDLE_EN		0x4000
+
+/************************** McBSP RCR1 bit definitions ************************/
+#define RWDLEN1(value)		((value)<<5)	/* Bits 5:7 */
+#define RFRLEN1(value)		((value)<<8)	/* Bits 8:14 */
+
+/************************** McBSP XCR1 bit definitions ************************/
+#define XWDLEN1(value)		((value)<<5)	/* Bits 5:7 */
+#define XFRLEN1(value)		((value)<<8)	/* Bits 8:14 */
+
+/*************************** McBSP RCR2 bit definitions ***********************/
+#define RDATDLY(value)		(value)		/* Bits 0:1 */
+#define RFIG			0x0004
+#define RCOMPAND(value)		((value)<<3)	/* Bits 3:4 */
+#define RWDLEN2(value)		((value)<<5)	/* Bits 5:7 */
+#define RFRLEN2(value)		((value)<<8)	/* Bits 8:14 */
+#define RPHASE			0x8000
+
+/*************************** McBSP XCR2 bit definitions ***********************/
+#define XDATDLY(value)		(value)		/* Bits 0:1 */
+#define XFIG			0x0004
+#define XCOMPAND(value)		((value)<<3)	/* Bits 3:4 */
+#define XWDLEN2(value)		((value)<<5)	/* Bits 5:7 */
+#define XFRLEN2(value)		((value)<<8)	/* Bits 8:14 */
+#define XPHASE			0x8000
+
+/************************* McBSP SRGR1 bit definitions ************************/
+#define CLKGDV(value)		(value)		/* Bits 0:7 */
+#define FWID(value)		((value)<<8)	/* Bits 8:15 */
+
+/************************* McBSP SRGR2 bit definitions ************************/
+#define FPER(value)		(value)		/* Bits 0:11 */
+#define FSGM			0x1000
+#define CLKSM			0x2000
+#define CLKSP			0x4000
+#define GSYNC			0x8000
+
+/************************* McBSP MCR1 bit definitions *************************/
+#define RMCM			0x0001
+#define RCBLK(value)		((value)<<2)	/* Bits 2:4 */
+#define RPABLK(value)		((value)<<5)	/* Bits 5:6 */
+#define RPBBLK(value)		((value)<<7)	/* Bits 7:8 */
+
+/************************* McBSP MCR2 bit definitions *************************/
+#define XMCM(value)		(value)		/* Bits 0:1 */
+#define XCBLK(value)		((value)<<2)	/* Bits 2:4 */
+#define XPABLK(value)		((value)<<5)	/* Bits 5:6 */
+#define XPBBLK(value)		((value)<<7)	/* Bits 7:8 */
+
+
+/* we don't do multichannel for now */
+struct omap_mcbsp_reg_cfg {
+	u16 spcr2;
+	u16 spcr1;
+	u16 rcr2;
+	u16 rcr1;
+	u16 xcr2;
+	u16 xcr1;
+	u16 srgr2;
+	u16 srgr1;
+	u16 mcr2;
+	u16 mcr1;
+	u16 pcr0;
+	u16 rcerc;
+	u16 rcerd;
+	u16 xcerc;
+	u16 xcerd;
+	u16 rcere;
+	u16 rcerf;
+	u16 xcere;
+	u16 xcerf;
+	u16 rcerg;
+	u16 rcerh;
+	u16 xcerg;
+	u16 xcerh;
+};
+
+typedef enum {
+	OMAP_MCBSP1 = 0,
+	OMAP_MCBSP2,
+	OMAP_MCBSP3,
+} omap_mcbsp_id;
+
+typedef int __bitwise omap_mcbsp_io_type_t;
+#define OMAP_MCBSP_IRQ_IO ((__force omap_mcbsp_io_type_t) 1)
+#define OMAP_MCBSP_POLL_IO ((__force omap_mcbsp_io_type_t) 2)
+
+typedef enum {
+	OMAP_MCBSP_WORD_8 = 0,
+	OMAP_MCBSP_WORD_12,
+	OMAP_MCBSP_WORD_16,
+	OMAP_MCBSP_WORD_20,
+	OMAP_MCBSP_WORD_24,
+	OMAP_MCBSP_WORD_32,
+} omap_mcbsp_word_length;
+
+typedef enum {
+	OMAP_MCBSP_CLK_RISING = 0,
+	OMAP_MCBSP_CLK_FALLING,
+} omap_mcbsp_clk_polarity;
+
+typedef enum {
+	OMAP_MCBSP_FS_ACTIVE_HIGH = 0,
+	OMAP_MCBSP_FS_ACTIVE_LOW,
+} omap_mcbsp_fs_polarity;
+
+typedef enum {
+	OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0,
+	OMAP_MCBSP_CLK_STP_MODE_DELAY,
+} omap_mcbsp_clk_stp_mode;
+
+
+/******* SPI specific mode **********/
+typedef enum {
+	OMAP_MCBSP_SPI_MASTER = 0,
+	OMAP_MCBSP_SPI_SLAVE,
+} omap_mcbsp_spi_mode;
+
+struct omap_mcbsp_spi_cfg {
+	omap_mcbsp_spi_mode		spi_mode;
+	omap_mcbsp_clk_polarity		rx_clock_polarity;
+	omap_mcbsp_clk_polarity		tx_clock_polarity;
+	omap_mcbsp_fs_polarity		fsx_polarity;
+	u8				clk_div;
+	omap_mcbsp_clk_stp_mode		clk_stp_mode;
+	omap_mcbsp_word_length		word_length;
+};
+
+/* Platform specific configuration */
+struct omap_mcbsp_ops {
+	void (*request)(unsigned int);
+	void (*free)(unsigned int);
+	int (*check)(unsigned int);
+};
+
+struct omap_mcbsp_platform_data {
+	u32 virt_base;
+	u8 dma_rx_sync, dma_tx_sync;
+	u16 rx_irq, tx_irq;
+	struct omap_mcbsp_ops *ops;
+	char const *clk_name;
+};
+
+struct omap_mcbsp {
+	struct device *dev;
+	u32 io_base;
+	u8 id;
+	u8 free;
+	omap_mcbsp_word_length rx_word_length;
+	omap_mcbsp_word_length tx_word_length;
+
+	omap_mcbsp_io_type_t io_type; /* IRQ or poll */
+	/* IRQ based TX/RX */
+	int rx_irq;
+	int tx_irq;
+
+	/* DMA stuff */
+	u8 dma_rx_sync;
+	short dma_rx_lch;
+	u8 dma_tx_sync;
+	short dma_tx_lch;
+
+	/* Completion queues */
+	struct completion tx_irq_completion;
+	struct completion rx_irq_completion;
+	struct completion tx_dma_completion;
+	struct completion rx_dma_completion;
+
+	/* Protect the field .free, while checking if the mcbsp is in use */
+	spinlock_t lock;
+	struct omap_mcbsp_platform_data *pdata;
+	struct clk *clk;
+};
+
+int omap_mcbsp_init(void);
+void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
+					int size);
+void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
+int omap_mcbsp_request(unsigned int id);
+void omap_mcbsp_free(unsigned int id);
+void omap_mcbsp_start(unsigned int id);
+void omap_mcbsp_stop(unsigned int id);
+void omap_mcbsp_xmit_word(unsigned int id, u32 word);
+u32 omap_mcbsp_recv_word(unsigned int id);
+
+int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
+int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
+int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word);
+int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word);
+
+
+/* SPI specific API */
+void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg);
+
+/* Polled read/write functions */
+int omap_mcbsp_pollread(unsigned int id, u16 * buf);
+int omap_mcbsp_pollwrite(unsigned int id, u16 buf);
+
+#endif
diff --git a/include/asm-arm/arch-omap/mcspi.h b/arch/arm/plat-omap/include/mach/mcspi.h
similarity index 100%
rename from include/asm-arm/arch-omap/mcspi.h
rename to arch/arm/plat-omap/include/mach/mcspi.h
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
new file mode 100644
index 0000000..037486c
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -0,0 +1,103 @@
+/*
+ * arch/arm/plat-omap/include/mach/memory.h
+ *
+ * Memory map for OMAP-1510 and 1610
+ *
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#if defined(CONFIG_ARCH_OMAP1)
+#define PHYS_OFFSET		UL(0x10000000)
+#elif defined(CONFIG_ARCH_OMAP2)
+#define PHYS_OFFSET		UL(0x80000000)
+#endif
+
+/*
+ * Conversion between SDRAM and fake PCI bus, used by USB
+ * NOTE: Physical address must be converted to Local Bus address
+ *	 on OMAP-1510 only
+ */
+
+/*
+ * Bus address is physical address, except for OMAP-1510 Local Bus.
+ */
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+/*
+ * OMAP-1510 bus address is translated into a Local Bus address if the
+ * OMAP bus type is lbus. We do the address translation based on the
+ * device overriding the defaults used in the dma-mapping API.
+ * Note that the is_lbus_device() test is not very efficient on 1510
+ * because of the strncmp().
+ */
+#ifdef CONFIG_ARCH_OMAP15XX
+
+/*
+ * OMAP-1510 Local Bus address offset
+ */
+#define OMAP1510_LB_OFFSET	UL(0x30000000)
+
+#define virt_to_lbus(x)		((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
+#define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
+#define is_lbus_device(dev)	(cpu_is_omap15xx() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0))
+
+#define __arch_page_to_dma(dev, page)	({is_lbus_device(dev) ? \
+					(dma_addr_t)virt_to_lbus(page_address(page)) : \
+					(dma_addr_t)__virt_to_bus(page_address(page));})
+
+#define __arch_dma_to_virt(dev, addr)	({is_lbus_device(dev) ? \
+					lbus_to_virt(addr) : \
+					__bus_to_virt(addr);})
+
+#define __arch_virt_to_dma(dev, addr)	({is_lbus_device(dev) ? \
+					virt_to_lbus(addr) : \
+					__virt_to_bus(addr);})
+
+#endif	/* CONFIG_ARCH_OMAP15XX */
+
+/* Override the ARM default */
+#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+
+#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0)
+#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2
+#endif
+
+#define CONSISTENT_DMA_SIZE \
+	(((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024)
+
+#endif
+
+#endif
+
diff --git a/arch/arm/plat-omap/include/mach/menelaus.h b/arch/arm/plat-omap/include/mach/menelaus.h
new file mode 100644
index 0000000..3122bf6
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/menelaus.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/plat-omap/include/mach/menelaus.h
+ *
+ * Functions to access Menelaus power management chip
+ */
+
+#ifndef __ASM_ARCH_MENELAUS_H
+#define __ASM_ARCH_MENELAUS_H
+
+struct device;
+
+struct menelaus_platform_data {
+	int (* late_init)(struct device *dev);
+};
+
+extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask),
+					  void *data);
+extern void menelaus_unregister_mmc_callback(void);
+extern int menelaus_set_mmc_opendrain(int slot, int enable);
+extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on);
+
+extern int menelaus_set_vmem(unsigned int mV);
+extern int menelaus_set_vio(unsigned int mV);
+extern int menelaus_set_vmmc(unsigned int mV);
+extern int menelaus_set_vaux(unsigned int mV);
+extern int menelaus_set_vdcdc(int dcdc, unsigned int mV);
+extern int menelaus_set_slot_sel(int enable);
+extern int menelaus_get_slot_pin_states(void);
+extern int menelaus_set_vcore_sw(unsigned int mV);
+extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV);
+
+#define EN_VPLL_SLEEP	(1 << 7)
+#define EN_VMMC_SLEEP	(1 << 6)
+#define EN_VAUX_SLEEP	(1 << 5)
+#define EN_VIO_SLEEP	(1 << 4)
+#define EN_VMEM_SLEEP	(1 << 3)
+#define EN_DC3_SLEEP	(1 << 2)
+#define EN_DC2_SLEEP	(1 << 1)
+#define EN_VC_SLEEP	(1 << 0)
+
+extern int menelaus_set_regulator_sleep(int enable, u32 val);
+
+#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS)
+#define omap_has_menelaus()	1
+#else
+#define omap_has_menelaus()	0
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
new file mode 100644
index 0000000..fc15d13
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -0,0 +1,74 @@
+/*
+ * MMC definitions for OMAP2
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP2_MMC_H
+#define __OMAP2_MMC_H
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/board.h>
+
+#define OMAP_MMC_MAX_SLOTS	2
+
+struct omap_mmc_platform_data {
+	struct omap_mmc_conf	conf;
+
+	/* number of slots on board */
+	unsigned nr_slots:2;
+
+	/* set if your board has components or wiring that limits the
+	 * maximum frequency on the MMC bus */
+	unsigned int max_freq;
+
+	/* switch the bus to a new slot */
+	int (* switch_slot)(struct device *dev, int slot);
+	/* initialize board-specific MMC functionality, can be NULL if
+	 * not supported */
+	int (* init)(struct device *dev);
+	void (* cleanup)(struct device *dev);
+	void (* shutdown)(struct device *dev);
+
+	/* To handle board related suspend/resume functionality for MMC */
+	int (*suspend)(struct device *dev, int slot);
+	int (*resume)(struct device *dev, int slot);
+
+	struct omap_mmc_slot_data {
+		int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
+		int (* set_power)(struct device *dev, int slot, int power_on, int vdd);
+		int (* get_ro)(struct device *dev, int slot);
+
+		/* return MMC cover switch state, can be NULL if not supported.
+		 *
+		 * possible return values:
+		 *   0 - open
+		 *   1 - closed
+		 */
+		int (* get_cover_state)(struct device *dev, int slot);
+
+		const char *name;
+		u32 ocr_mask;
+
+		/* Card detection IRQs */
+		int card_detect_irq;
+		int (* card_detect)(int irq);
+
+		unsigned int ban_openended:1;
+
+	} slots[OMAP_MMC_MAX_SLOTS];
+};
+
+extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info);
+
+/* called from board-specific card detection service routine */
+extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/mtd-xip.h b/arch/arm/plat-omap/include/mach/mtd-xip.h
new file mode 100644
index 0000000..5cee7e1
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mtd-xip.h
@@ -0,0 +1,61 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions.
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ *
+ * Author: Vladimir Barinov <vbarinov@ru.mvista.com>
+ *
+ * (c) 2005 MontaVista Software, Inc.  This file is licensed under the
+ * terms of the GNU General Public License version 2.  This program is
+ * licensed "as is" without any warranty of any kind, whether express or
+ * implied.
+ */
+
+#ifndef __ARCH_OMAP_MTD_XIP_H__
+#define __ARCH_OMAP_MTD_XIP_H__
+
+#include <mach/hardware.h>
+#define OMAP_MPU_TIMER_BASE	(0xfffec500)
+#define OMAP_MPU_TIMER_OFFSET	0x100
+
+typedef struct {
+	u32 cntl;			/* CNTL_TIMER, R/W */
+	u32 load_tim;			/* LOAD_TIM,   W */
+	u32 read_tim;			/* READ_TIM,   R */
+} xip_omap_mpu_timer_regs_t;
+
+#define xip_omap_mpu_timer_base(n)					\
+((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
+	(n)*OMAP_MPU_TIMER_OFFSET))
+
+static inline unsigned long xip_omap_mpu_timer_read(int nr)
+{
+	volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr);
+	return timer->read_tim;
+}
+
+#define xip_irqpending()	\
+	(omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR))
+#define xip_currtime()		(~xip_omap_mpu_timer_read(0))
+
+/*
+ * It's permitted to do approxmation for xip_elapsed_since macro
+ * (see linux/mtd/xip.h)
+ */
+
+#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7)
+#else
+#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6)
+#endif
+
+/*
+ * xip_cpu_idle() is used when waiting for a delay equal or larger than
+ * the system timer tick period.  This should put the CPU into idle mode
+ * to save power and to be woken up only when some interrupts are pending.
+ * As above, this should not rely upon standard kernel code.
+ */
+
+#define xip_cpu_idle()  asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1))
+
+#endif /* __ARCH_OMAP_MTD_XIP_H__ */
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
new file mode 100644
index 0000000..614b2c1
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -0,0 +1,615 @@
+/*
+ * arch/arm/plat-omap/include/mach/mux.h
+ *
+ * Table of the Omap register configurations for the FUNC_MUX and
+ * PULL_DWN combinations.
+ *
+ * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: Please use the following naming style for new pin entries.
+ *	 For example, W8_1610_MMC2_DAT0, where:
+ *	 - W8	     = ball
+ *	 - 1610	     = 1510 or 1610, none if common for both 1510 and 1610
+ *	 - MMC2_DAT0 = function
+ */
+
+#ifndef __ASM_ARCH_MUX_H
+#define __ASM_ARCH_MUX_H
+
+#define PU_PD_SEL_NA		0	/* No pu_pd reg available */
+#define PULL_DWN_CTRL_NA	0	/* No pull-down control needed */
+
+#ifdef	CONFIG_OMAP_MUX_DEBUG
+#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
+					.mux_reg = FUNC_MUX_CTRL_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG(reg, bit, status)	.pull_name = "PULL_DWN_CTRL_"#reg, \
+					.pull_reg = PULL_DWN_CTRL_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#define PU_PD_REG(reg, status)		.pu_pd_name = "PU_PD_SEL_"#reg, \
+					.pu_pd_reg = PU_PD_SEL_##reg, \
+					.pu_pd_val = status,
+
+#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
+					.mux_reg = OMAP730_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_730(reg, bit, status)	.pull_name = "OMAP730_IO_CONF_"#reg, \
+					.pull_reg = OMAP730_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#else
+
+#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG(reg, bit, status)	.pull_reg = PULL_DWN_CTRL_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
+					.pu_pd_val = status,
+
+#define MUX_REG_730(reg, mode_offset, mode) \
+					.mux_reg = OMAP730_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_730(reg, bit, status)	.pull_reg = OMAP730_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#endif /* CONFIG_OMAP_MUX_DEBUG */
+
+#define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
+		pull_reg, pull_bit, pull_status,	\
+		pu_pd_reg, pu_pd_status, debug_status)	\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG(mux_reg, mode_offset, mode)		\
+	PULL_REG(pull_reg, pull_bit, pull_status)	\
+	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
+},
+
+
+/*
+ * OMAP730 has a slightly different config for the pin mux.
+ * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
+ *   not the FUNC_MUX_CTRL_x regs from hardware.h
+ * - for pull-up/down, only has one enable bit which is is in the same register
+ *   as mux config
+ */
+#define MUX_CFG_730(desc, mux_reg, mode_offset, mode,	\
+		   pull_bit, pull_status, debug_status)\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG_730(mux_reg, mode_offset, mode)		\
+	PULL_REG_730(mux_reg, pull_bit, pull_status)	\
+	PU_PD_REG(NA, 0)		\
+},
+
+#define MUX_CFG_24XX(desc, reg_offset, mode,			\
+				pull_en, pull_mode, dbg)	\
+{								\
+	.name		= desc,					\
+	.debug		= dbg,					\
+	.mux_reg	= reg_offset,				\
+	.mask		= mode,					\
+	.pull_val	= pull_en,				\
+	.pu_pd_val	= pull_mode,				\
+},
+
+
+#define PULL_DISABLED	0
+#define PULL_ENABLED	1
+
+#define PULL_DOWN	0
+#define PULL_UP		1
+
+struct pin_config {
+	char *name;
+	unsigned char busy;
+	unsigned char debug;
+
+	const char *mux_reg_name;
+	const unsigned int mux_reg;
+	const unsigned char mask_offset;
+	const unsigned char mask;
+
+	const char *pull_name;
+	const unsigned int pull_reg;
+	const unsigned char pull_val;
+	const unsigned char pull_bit;
+
+	const char *pu_pd_name;
+	const unsigned int pu_pd_reg;
+	const unsigned char pu_pd_val;
+};
+
+enum omap730_index {
+	/* OMAP 730 keyboard */
+	E2_730_KBR0,
+	J7_730_KBR1,
+	E1_730_KBR2,
+	F3_730_KBR3,
+	D2_730_KBR4,
+	C2_730_KBC0,
+	D3_730_KBC1,
+	E4_730_KBC2,
+	F4_730_KBC3,
+	E3_730_KBC4,
+
+	/* USB */
+	AA17_730_USB_DM,
+	W16_730_USB_PU_EN,
+	W17_730_USB_VBUSI,
+};
+
+enum omap1xxx_index {
+	/* UART1 (BT_UART_GATING)*/
+	UART1_TX = 0,
+	UART1_RTS,
+
+	/* UART2 (COM_UART_GATING)*/
+	UART2_TX,
+	UART2_RX,
+	UART2_CTS,
+	UART2_RTS,
+
+	/* UART3 (GIGA_UART_GATING) */
+	UART3_TX,
+	UART3_RX,
+	UART3_CTS,
+	UART3_RTS,
+	UART3_CLKREQ,
+	UART3_BCLK,	/* 12MHz clock out */
+	Y15_1610_UART3_RTS,
+
+	/* PWT & PWL */
+	PWT,
+	PWL,
+
+	/* USB master generic */
+	R18_USB_VBUS,
+	R18_1510_USB_GPIO0,
+	W4_USB_PUEN,
+	W4_USB_CLKO,
+	W4_USB_HIGHZ,
+	W4_GPIO58,
+
+	/* USB1 master */
+	USB1_SUSP,
+	USB1_SEO,
+	W13_1610_USB1_SE0,
+	USB1_TXEN,
+	USB1_TXD,
+	USB1_VP,
+	USB1_VM,
+	USB1_RCV,
+	USB1_SPEED,
+	R13_1610_USB1_SPEED,
+	R13_1710_USB1_SE0,
+
+	/* USB2 master */
+	USB2_SUSP,
+	USB2_VP,
+	USB2_TXEN,
+	USB2_VM,
+	USB2_RCV,
+	USB2_SEO,
+	USB2_TXD,
+
+	/* OMAP-1510 GPIO */
+	R18_1510_GPIO0,
+	R19_1510_GPIO1,
+	M14_1510_GPIO2,
+
+	/* OMAP1610 GPIO */
+	P18_1610_GPIO3,
+	Y15_1610_GPIO17,
+
+	/* OMAP-1710 GPIO */
+	R18_1710_GPIO0,
+	V2_1710_GPIO10,
+	N21_1710_GPIO14,
+	W15_1710_GPIO40,
+
+	/* MPUIO */
+	MPUIO2,
+	N15_1610_MPUIO2,
+	MPUIO4,
+	MPUIO5,
+	T20_1610_MPUIO5,
+	W11_1610_MPUIO6,
+	V10_1610_MPUIO7,
+	W11_1610_MPUIO9,
+	V10_1610_MPUIO10,
+	W10_1610_MPUIO11,
+	E20_1610_MPUIO13,
+	U20_1610_MPUIO14,
+	E19_1610_MPUIO15,
+
+	/* MCBSP2 */
+	MCBSP2_CLKR,
+	MCBSP2_CLKX,
+	MCBSP2_DR,
+	MCBSP2_DX,
+	MCBSP2_FSR,
+	MCBSP2_FSX,
+
+	/* MCBSP3 */
+	MCBSP3_CLKX,
+
+	/* Misc ballouts */
+	BALLOUT_V8_ARMIO3,
+	N20_HDQ,
+
+	/* OMAP-1610 MMC2 */
+	W8_1610_MMC2_DAT0,
+	V8_1610_MMC2_DAT1,
+	W15_1610_MMC2_DAT2,
+	R10_1610_MMC2_DAT3,
+	Y10_1610_MMC2_CLK,
+	Y8_1610_MMC2_CMD,
+	V9_1610_MMC2_CMDDIR,
+	V5_1610_MMC2_DATDIR0,
+	W19_1610_MMC2_DATDIR1,
+	R18_1610_MMC2_CLKIN,
+
+	/* OMAP-1610 External Trace Interface */
+	M19_1610_ETM_PSTAT0,
+	L15_1610_ETM_PSTAT1,
+	L18_1610_ETM_PSTAT2,
+	L19_1610_ETM_D0,
+	J19_1610_ETM_D6,
+	J18_1610_ETM_D7,
+
+	/* OMAP16XX GPIO */
+	P20_1610_GPIO4,
+	V9_1610_GPIO7,
+	W8_1610_GPIO9,
+	N20_1610_GPIO11,
+	N19_1610_GPIO13,
+	P10_1610_GPIO22,
+	V5_1610_GPIO24,
+	AA20_1610_GPIO_41,
+	W19_1610_GPIO48,
+	M7_1610_GPIO62,
+	V14_16XX_GPIO37,
+	R9_16XX_GPIO18,
+	L14_16XX_GPIO49,
+
+	/* OMAP-1610 uWire */
+	V19_1610_UWIRE_SCLK,
+	U18_1610_UWIRE_SDI,
+	W21_1610_UWIRE_SDO,
+	N14_1610_UWIRE_CS0,
+	P15_1610_UWIRE_CS3,
+	N15_1610_UWIRE_CS1,
+
+	/* OMAP-1610 SPI */
+	U19_1610_SPIF_SCK,
+	U18_1610_SPIF_DIN,
+	P20_1610_SPIF_DIN,
+	W21_1610_SPIF_DOUT,
+	R18_1610_SPIF_DOUT,
+	N14_1610_SPIF_CS0,
+	N15_1610_SPIF_CS1,
+	T19_1610_SPIF_CS2,
+	P15_1610_SPIF_CS3,
+
+	/* OMAP-1610 Flash */
+	L3_1610_FLASH_CS2B_OE,
+	M8_1610_FLASH_CS2B_WE,
+
+	/* First MMC */
+	MMC_CMD,
+	MMC_DAT1,
+	MMC_DAT2,
+	MMC_DAT0,
+	MMC_CLK,
+	MMC_DAT3,
+
+	/* OMAP-1710 MMC CMDDIR and DATDIR0 */
+	M15_1710_MMC_CLKI,
+	P19_1710_MMC_CMDDIR,
+	P20_1710_MMC_DATDIR0,
+
+	/* OMAP-1610 USB0 alternate pin configuration */
+	W9_USB0_TXEN,
+	AA9_USB0_VP,
+	Y5_USB0_RCV,
+	R9_USB0_VM,
+	V6_USB0_TXD,
+	W5_USB0_SE0,
+	V9_USB0_SPEED,
+	V9_USB0_SUSP,
+
+	/* USB2 */
+	W9_USB2_TXEN,
+	AA9_USB2_VP,
+	Y5_USB2_RCV,
+	R9_USB2_VM,
+	V6_USB2_TXD,
+	W5_USB2_SE0,
+
+	/* 16XX UART */
+	R13_1610_UART1_TX,
+	V14_16XX_UART1_RX,
+	R14_1610_UART1_CTS,
+	AA15_1610_UART1_RTS,
+	R9_16XX_UART2_RX,
+	L14_16XX_UART3_RX,
+
+	/* I2C OMAP-1610 */
+	I2C_SCL,
+	I2C_SDA,
+
+	/* Keypad */
+	F18_1610_KBC0,
+	D20_1610_KBC1,
+	D19_1610_KBC2,
+	E18_1610_KBC3,
+	C21_1610_KBC4,
+	G18_1610_KBR0,
+	F19_1610_KBR1,
+	H14_1610_KBR2,
+	E20_1610_KBR3,
+	E19_1610_KBR4,
+	N19_1610_KBR5,
+
+	/* Power management */
+	T20_1610_LOW_PWR,
+
+	/* MCLK Settings */
+	V5_1710_MCLK_ON,
+	V5_1710_MCLK_OFF,
+	R10_1610_MCLK_ON,
+	R10_1610_MCLK_OFF,
+
+	/* CompactFlash controller */
+	P11_1610_CF_CD2,
+	R11_1610_CF_IOIS16,
+	V10_1610_CF_IREQ,
+	W10_1610_CF_RESET,
+	W11_1610_CF_CD1,
+
+	/* parallel camera */
+	J15_1610_CAM_LCLK,
+	J18_1610_CAM_D7,
+	J19_1610_CAM_D6,
+	J14_1610_CAM_D5,
+	K18_1610_CAM_D4,
+	K19_1610_CAM_D3,
+	K15_1610_CAM_D2,
+	K14_1610_CAM_D1,
+	L19_1610_CAM_D0,
+	L18_1610_CAM_VS,
+	L15_1610_CAM_HS,
+	M19_1610_CAM_RSTZ,
+	Y15_1610_CAM_OUTCLK,
+
+	/* serial camera */
+	H19_1610_CAM_EXCLK,
+	Y12_1610_CCP_CLKP,
+	W13_1610_CCP_CLKM,
+	W14_1610_CCP_DATAP,
+	Y14_1610_CCP_DATAM,
+
+};
+
+enum omap24xx_index {
+	/* 24xx I2C */
+	M19_24XX_I2C1_SCL,
+	L15_24XX_I2C1_SDA,
+	J15_24XX_I2C2_SCL,
+	H19_24XX_I2C2_SDA,
+
+	/* 24xx Menelaus interrupt */
+	W19_24XX_SYS_NIRQ,
+
+	/* 24xx clock */
+	W14_24XX_SYS_CLKOUT,
+
+	/* 24xx GPMC chipselects, wait pin monitoring */
+	E2_GPMC_NCS2,
+	L2_GPMC_NCS7,
+	L3_GPMC_WAIT0,
+	N7_GPMC_WAIT1,
+	M1_GPMC_WAIT2,
+	P1_GPMC_WAIT3,
+
+	/* 242X McBSP */
+	Y15_24XX_MCBSP2_CLKX,
+	R14_24XX_MCBSP2_FSX,
+	W15_24XX_MCBSP2_DR,
+	V15_24XX_MCBSP2_DX,
+
+	/* 24xx GPIO */
+	M21_242X_GPIO11,
+	P21_242X_GPIO12,
+	AA10_242X_GPIO13,
+	AA6_242X_GPIO14,
+	AA4_242X_GPIO15,
+	Y11_242X_GPIO16,
+	AA12_242X_GPIO17,
+	AA8_242X_GPIO58,
+	Y20_24XX_GPIO60,
+	W4__24XX_GPIO74,
+	N15_24XX_GPIO85,
+	M15_24XX_GPIO92,
+	P20_24XX_GPIO93,
+	P18_24XX_GPIO95,
+	M18_24XX_GPIO96,
+	L14_24XX_GPIO97,
+	J15_24XX_GPIO99,
+	V14_24XX_GPIO117,
+	P14_24XX_GPIO125,
+
+	/* 242x DBG GPIO */
+	V4_242X_GPIO49,
+	W2_242X_GPIO50,
+	U4_242X_GPIO51,
+	V3_242X_GPIO52,
+	V2_242X_GPIO53,
+	V6_242X_GPIO53,
+	T4_242X_GPIO54,
+	Y4_242X_GPIO54,
+	T3_242X_GPIO55,
+	U2_242X_GPIO56,
+
+	/* 24xx external DMA requests */
+	AA10_242X_DMAREQ0,
+	AA6_242X_DMAREQ1,
+	E4_242X_DMAREQ2,
+	G4_242X_DMAREQ3,
+	D3_242X_DMAREQ4,
+	E3_242X_DMAREQ5,
+
+	/* UART3 */
+	K15_24XX_UART3_TX,
+	K14_24XX_UART3_RX,
+
+	/* MMC/SDIO */
+	G19_24XX_MMC_CLKO,
+	H18_24XX_MMC_CMD,
+	F20_24XX_MMC_DAT0,
+	H14_24XX_MMC_DAT1,
+	E19_24XX_MMC_DAT2,
+	D19_24XX_MMC_DAT3,
+	F19_24XX_MMC_DAT_DIR0,
+	E20_24XX_MMC_DAT_DIR1,
+	F18_24XX_MMC_DAT_DIR2,
+	E18_24XX_MMC_DAT_DIR3,
+	G18_24XX_MMC_CMD_DIR,
+	H15_24XX_MMC_CLKI,
+
+	/* Full speed USB */
+	J20_24XX_USB0_PUEN,
+	J19_24XX_USB0_VP,
+	K20_24XX_USB0_VM,
+	J18_24XX_USB0_RCV,
+	K19_24XX_USB0_TXEN,
+	J14_24XX_USB0_SE0,
+	K18_24XX_USB0_DAT,
+
+	N14_24XX_USB1_SE0,
+	W12_24XX_USB1_SE0,
+	P15_24XX_USB1_DAT,
+	R13_24XX_USB1_DAT,
+	W20_24XX_USB1_TXEN,
+	P13_24XX_USB1_TXEN,
+	V19_24XX_USB1_RCV,
+	V12_24XX_USB1_RCV,
+
+	AA10_24XX_USB2_SE0,
+	Y11_24XX_USB2_DAT,
+	AA12_24XX_USB2_TXEN,
+	AA6_24XX_USB2_RCV,
+	AA4_24XX_USB2_TLLSE0,
+
+	/* Keypad GPIO*/
+	T19_24XX_KBR0,
+	R19_24XX_KBR1,
+	V18_24XX_KBR2,
+	M21_24XX_KBR3,
+	E5__24XX_KBR4,
+	M18_24XX_KBR5,
+	R20_24XX_KBC0,
+	M14_24XX_KBC1,
+	H19_24XX_KBC2,
+	V17_24XX_KBC3,
+	P21_24XX_KBC4,
+	L14_24XX_KBC5,
+	N19_24XX_KBC6,
+
+	/* 24xx Menelaus Keypad GPIO */
+	B3__24XX_KBR5,
+	AA4_24XX_KBC2,
+	B13_24XX_KBC6,
+
+	/* 2430 USB */
+	AD9_2430_USB0_PUEN,
+	Y11_2430_USB0_VP,
+	AD7_2430_USB0_VM,
+	AE7_2430_USB0_RCV,
+	AD4_2430_USB0_TXEN,
+	AF9_2430_USB0_SE0,
+	AE6_2430_USB0_DAT,
+	AD24_2430_USB1_SE0,
+	AB24_2430_USB1_RCV,
+	Y25_2430_USB1_TXEN,
+	AA26_2430_USB1_DAT,
+
+	/* 2430 HS-USB */
+	AD9_2430_USB0HS_DATA3,
+	Y11_2430_USB0HS_DATA4,
+	AD7_2430_USB0HS_DATA5,
+	AE7_2430_USB0HS_DATA6,
+	AD4_2430_USB0HS_DATA2,
+	AF9_2430_USB0HS_DATA0,
+	AE6_2430_USB0HS_DATA1,
+	AE8_2430_USB0HS_CLK,
+	AD8_2430_USB0HS_DIR,
+	AE5_2430_USB0HS_STP,
+	AE9_2430_USB0HS_NXT,
+	AC7_2430_USB0HS_DATA7,
+
+	/* 2430 McBSP */
+	AC10_2430_MCBSP2_FSX,
+	AD16_2430_MCBSP2_CLX,
+	AE13_2430_MCBSP2_DX,
+	AD13_2430_MCBSP2_DR,
+	AC10_2430_MCBSP2_FSX_OFF,
+	AD16_2430_MCBSP2_CLX_OFF,
+	AE13_2430_MCBSP2_DX_OFF,
+	AD13_2430_MCBSP2_DR_OFF,
+
+};
+
+struct omap_mux_cfg {
+	struct pin_config	*pins;
+	unsigned long		size;
+	int			(*cfg_reg)(const struct pin_config *cfg);
+};
+
+#ifdef	CONFIG_OMAP_MUX
+/* setup pin muxing in Linux */
+extern int omap1_mux_init(void);
+extern int omap2_mux_init(void);
+extern int omap_mux_register(struct omap_mux_cfg *);
+extern int omap_cfg_reg(unsigned long reg_cfg);
+#else
+/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
+static inline int omap1_mux_init(void) { return 0; }
+static inline int omap2_mux_init(void) { return 0; }
+static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/nand.h b/arch/arm/plat-omap/include/mach/nand.h
new file mode 100644
index 0000000..631a7be
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/nand.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/plat-omap/include/mach/nand.h
+ *
+ * Copyright (C) 2006 Micron Technology Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mtd/partitions.h>
+
+struct omap_nand_platform_data {
+	unsigned int		options;
+	int			cs;
+	int			gpio_irq;
+	struct mtd_partition	*parts;
+	int			nr_parts;
+	int			(*nand_setup)(void __iomem *);
+	int			(*dev_ready)(struct omap_nand_platform_data *);
+	int			dma_channel;
+	void __iomem		*gpmc_cs_baseaddr;
+	void __iomem		*gpmc_baseaddr;
+};
diff --git a/arch/arm/plat-omap/include/mach/omap-alsa.h b/arch/arm/plat-omap/include/mach/omap-alsa.h
new file mode 100644
index 0000000..bdf30a0
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap-alsa.h
@@ -0,0 +1,123 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap-alsa.h
+ *
+ * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards.
+ *
+ * Copyright (C) 2006 Mika Laitio <lamikr@cc.jyu.fi>
+ *
+ * Copyright (C) 2005 Instituto Nokia de Tecnologia - INdT - Manaus Brazil
+ * Written by Daniel Petrini, David Cohen, Anderson Briglia
+ *            {daniel.petrini, david.cohen, anderson.briglia}@indt.org.br
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  History
+ *  -------
+ *
+ *  2005/07/25 INdT-10LE Kernel Team - 	Alsa driver for omap osk,
+ *  					original version based in sa1100 driver
+ *  					and omap oss driver.
+ */
+
+#ifndef __OMAP_ALSA_H
+#define __OMAP_ALSA_H
+
+#include <mach/dma.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <mach/mcbsp.h>
+#include <linux/platform_device.h>
+
+#define DMA_BUF_SIZE	(1024 * 8)
+
+/*
+ * Buffer management for alsa and dma
+ */
+struct audio_stream {
+	char *id;		/* identification string */
+	int stream_id;		/* numeric identification */
+	int dma_dev;		/* dma number of that device */
+	int *lch;		/* Chain of channels this stream is linked to */
+	char started;		/* to store if the chain was started or not */
+	int dma_q_head;		/* DMA Channel Q Head */
+	int dma_q_tail;		/* DMA Channel Q Tail */
+	char dma_q_count;	/* DMA Channel Q Count */
+	int active:1;		/* we are using this stream for transfer now */
+	int period;		/* current transfer period */
+	int periods;		/* current count of periods registerd in the DMA engine */
+	spinlock_t dma_lock;	/* for locking in DMA operations */
+	struct snd_pcm_substream *stream;	/* the pcm stream */
+	unsigned linked:1;	/* dma channels linked */
+	int offset;		/* store start position of the last period in the alsa buffer */
+	int (*hw_start)(void);  /* interface to start HW interface, e.g. McBSP */
+	int (*hw_stop)(void);   /* interface to stop HW interface, e.g. McBSP */
+};
+
+/*
+ * Alsa card structure for aic23
+ */
+struct snd_card_omap_codec {
+	struct snd_card *card;
+	struct snd_pcm *pcm;
+	long samplerate;
+	struct audio_stream s[2];	/* playback & capture */
+};
+
+/* Codec specific information and function pointers.
+ * Codec (omap-alsa-aic23.c and omap-alsa-tsc2101.c)
+ * are responsible for defining the function pointers.
+ */
+struct omap_alsa_codec_config {
+	char 	*name;
+	struct	omap_mcbsp_reg_cfg *mcbsp_regs_alsa;
+	struct	snd_pcm_hw_constraint_list *hw_constraints_rates;
+	struct	snd_pcm_hardware *snd_omap_alsa_playback;
+	struct	snd_pcm_hardware *snd_omap_alsa_capture;
+	void	(*codec_configure_dev)(void);
+	void	(*codec_set_samplerate)(long);
+	void	(*codec_clock_setup)(void);
+	int	(*codec_clock_on)(void);
+	int 	(*codec_clock_off)(void);
+	int	(*get_default_samplerate)(void);
+};
+
+/*********** Mixer function prototypes *************************/
+int snd_omap_mixer(struct snd_card_omap_codec *);
+void snd_omap_init_mixer(void);
+
+#ifdef CONFIG_PM
+void snd_omap_suspend_mixer(void);
+void snd_omap_resume_mixer(void);
+#endif
+
+int snd_omap_alsa_post_probe(struct platform_device *pdev, struct omap_alsa_codec_config *config);
+int snd_omap_alsa_remove(struct platform_device *pdev);
+#ifdef CONFIG_PM
+int snd_omap_alsa_suspend(struct platform_device *pdev, pm_message_t state);
+int snd_omap_alsa_resume(struct platform_device *pdev);
+#else
+#define snd_omap_alsa_suspend	NULL
+#define snd_omap_alsa_resume	NULL
+#endif
+
+void callback_omap_alsa_sound_dma(void *);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/mach/omap1510.h
new file mode 100644
index 0000000..505a38a
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap1510.h
@@ -0,0 +1,48 @@
+/* arch/arm/plat-omap/include/mach/omap1510.h
+ *
+ * Hardware definitions for TI OMAP1510 processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_H
+#define __ASM_ARCH_OMAP15XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP1510_DSP_BASE	0xE0000000
+#define OMAP1510_DSP_SIZE	0x28000
+#define OMAP1510_DSP_START	0xE0000000
+
+#define OMAP1510_DSPREG_BASE	0xE1000000
+#define OMAP1510_DSPREG_SIZE	SZ_128K
+#define OMAP1510_DSPREG_START	0xE1000000
+
+#endif /*  __ASM_ARCH_OMAP15XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h
new file mode 100644
index 0000000..c6c93af
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap16xx.h
@@ -0,0 +1,197 @@
+/* arch/arm/plat-omap/include/mach/omap16xx.h
+ *
+ * Hardware definitions for TI OMAP1610/5912/1710 processors.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP16XX_H
+#define __ASM_ARCH_OMAP16XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP16XX_DSP_BASE	0xE0000000
+#define OMAP16XX_DSP_SIZE	0x28000
+#define OMAP16XX_DSP_START	0xE0000000
+
+#define OMAP16XX_DSPREG_BASE	0xE1000000
+#define OMAP16XX_DSPREG_SIZE	SZ_128K
+#define OMAP16XX_DSPREG_START	0xE1000000
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP_IH2_0_BASE		(0xfffe0000)
+#define OMAP_IH2_1_BASE		(0xfffe0100)
+#define OMAP_IH2_2_BASE		(0xfffe0200)
+#define OMAP_IH2_3_BASE		(0xfffe0300)
+
+#define OMAP_IH2_0_ITR		(OMAP_IH2_0_BASE + 0x00)
+#define OMAP_IH2_0_MIR		(OMAP_IH2_0_BASE + 0x04)
+#define OMAP_IH2_0_SIR_IRQ	(OMAP_IH2_0_BASE + 0x10)
+#define OMAP_IH2_0_SIR_FIQ	(OMAP_IH2_0_BASE + 0x14)
+#define OMAP_IH2_0_CONTROL	(OMAP_IH2_0_BASE + 0x18)
+#define OMAP_IH2_0_ILR0		(OMAP_IH2_0_BASE + 0x1c)
+#define OMAP_IH2_0_ISR		(OMAP_IH2_0_BASE + 0x9c)
+
+#define OMAP_IH2_1_ITR		(OMAP_IH2_1_BASE + 0x00)
+#define OMAP_IH2_1_MIR		(OMAP_IH2_1_BASE + 0x04)
+#define OMAP_IH2_1_SIR_IRQ	(OMAP_IH2_1_BASE + 0x10)
+#define OMAP_IH2_1_SIR_FIQ	(OMAP_IH2_1_BASE + 0x14)
+#define OMAP_IH2_1_CONTROL	(OMAP_IH2_1_BASE + 0x18)
+#define OMAP_IH2_1_ILR1		(OMAP_IH2_1_BASE + 0x1c)
+#define OMAP_IH2_1_ISR		(OMAP_IH2_1_BASE + 0x9c)
+
+#define OMAP_IH2_2_ITR		(OMAP_IH2_2_BASE + 0x00)
+#define OMAP_IH2_2_MIR		(OMAP_IH2_2_BASE + 0x04)
+#define OMAP_IH2_2_SIR_IRQ	(OMAP_IH2_2_BASE + 0x10)
+#define OMAP_IH2_2_SIR_FIQ	(OMAP_IH2_2_BASE + 0x14)
+#define OMAP_IH2_2_CONTROL	(OMAP_IH2_2_BASE + 0x18)
+#define OMAP_IH2_2_ILR2		(OMAP_IH2_2_BASE + 0x1c)
+#define OMAP_IH2_2_ISR		(OMAP_IH2_2_BASE + 0x9c)
+
+#define OMAP_IH2_3_ITR		(OMAP_IH2_3_BASE + 0x00)
+#define OMAP_IH2_3_MIR		(OMAP_IH2_3_BASE + 0x04)
+#define OMAP_IH2_3_SIR_IRQ	(OMAP_IH2_3_BASE + 0x10)
+#define OMAP_IH2_3_SIR_FIQ	(OMAP_IH2_3_BASE + 0x14)
+#define OMAP_IH2_3_CONTROL	(OMAP_IH2_3_BASE + 0x18)
+#define OMAP_IH2_3_ILR3		(OMAP_IH2_3_BASE + 0x1c)
+#define OMAP_IH2_3_ISR		(OMAP_IH2_3_BASE + 0x9c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_ARM_IDLECT3	(CLKGEN_REG_BASE + 0x24)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV6	(1 << 8)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV7	(1 << 9)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV8	(1 << 10)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV9	(1 << 11)
+#define OMAP16XX_SUBLVDS_CONF_VALID	(1 << 13)
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP1610_RESET_CONTROL  0xfffe1140
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_SWITCH_BASE		 (0xfffbc800)
+#define OMAP16XX_MMCSD2_SSW_MPU_CONF	(TIPB_SWITCH_BASE + 0x160)
+
+/* UART3 Registers Maping through MPU bus */
+#define UART3_RHR               (OMAP_UART3_BASE + 0)
+#define UART3_THR               (OMAP_UART3_BASE + 0)
+#define UART3_DLL               (OMAP_UART3_BASE + 0)
+#define UART3_IER               (OMAP_UART3_BASE + 4)
+#define UART3_DLH               (OMAP_UART3_BASE + 4)
+#define UART3_IIR               (OMAP_UART3_BASE + 8)
+#define UART3_FCR               (OMAP_UART3_BASE + 8)
+#define UART3_EFR               (OMAP_UART3_BASE + 8)
+#define UART3_LCR               (OMAP_UART3_BASE + 0x0C)
+#define UART3_MCR               (OMAP_UART3_BASE + 0x10)
+#define UART3_XON1_ADDR1        (OMAP_UART3_BASE + 0x10)
+#define UART3_XON2_ADDR2        (OMAP_UART3_BASE + 0x14)
+#define UART3_LSR               (OMAP_UART3_BASE + 0x14)
+#define UART3_TCR               (OMAP_UART3_BASE + 0x18)
+#define UART3_MSR               (OMAP_UART3_BASE + 0x18)
+#define UART3_XOFF1             (OMAP_UART3_BASE + 0x18)
+#define UART3_XOFF2             (OMAP_UART3_BASE + 0x1C)
+#define UART3_SPR               (OMAP_UART3_BASE + 0x1C)
+#define UART3_TLR               (OMAP_UART3_BASE + 0x1C)
+#define UART3_MDR1              (OMAP_UART3_BASE + 0x20)
+#define UART3_MDR2              (OMAP_UART3_BASE + 0x24)
+#define UART3_SFLSR             (OMAP_UART3_BASE + 0x28)
+#define UART3_TXFLL             (OMAP_UART3_BASE + 0x28)
+#define UART3_RESUME            (OMAP_UART3_BASE + 0x2C)
+#define UART3_TXFLH             (OMAP_UART3_BASE + 0x2C)
+#define UART3_SFREGL            (OMAP_UART3_BASE + 0x30)
+#define UART3_RXFLL             (OMAP_UART3_BASE + 0x30)
+#define UART3_SFREGH            (OMAP_UART3_BASE + 0x34)
+#define UART3_RXFLH             (OMAP_UART3_BASE + 0x34)
+#define UART3_BLR               (OMAP_UART3_BASE + 0x38)
+#define UART3_ACREG             (OMAP_UART3_BASE + 0x3C)
+#define UART3_DIV16             (OMAP_UART3_BASE + 0x3C)
+#define UART3_SCR               (OMAP_UART3_BASE + 0x40)
+#define UART3_SSR               (OMAP_UART3_BASE + 0x44)
+#define UART3_EBLR              (OMAP_UART3_BASE + 0x48)
+#define UART3_OSC_12M_SEL       (OMAP_UART3_BASE + 0x4C)
+#define UART3_MVR               (OMAP_UART3_BASE + 0x50)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* 32-bit Watchdog timer in OMAP 16XX */
+#define OMAP_16XX_WATCHDOG_BASE        (0xfffeb000)
+#define OMAP_16XX_WIDR         (OMAP_16XX_WATCHDOG_BASE + 0x00)
+#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
+#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)
+#define OMAP_16XX_WCLR         (OMAP_16XX_WATCHDOG_BASE + 0x24)
+#define OMAP_16XX_WCRR         (OMAP_16XX_WATCHDOG_BASE + 0x28)
+#define OMAP_16XX_WLDR         (OMAP_16XX_WATCHDOG_BASE + 0x2c)
+#define OMAP_16XX_WTGR         (OMAP_16XX_WATCHDOG_BASE + 0x30)
+#define OMAP_16XX_WWPS         (OMAP_16XX_WATCHDOG_BASE + 0x34)
+#define OMAP_16XX_WSPR         (OMAP_16XX_WATCHDOG_BASE + 0x48)
+
+#define WCLR_PRE_SHIFT         5
+#define WCLR_PTV_SHIFT         2
+
+#define WWPS_W_PEND_WSPR       (1 << 4)
+#define WWPS_W_PEND_WTGR       (1 << 3)
+#define WWPS_W_PEND_WLDR       (1 << 2)
+#define WWPS_W_PEND_WCRR       (1 << 1)
+#define WWPS_W_PEND_WCLR       (1 << 0)
+
+#define WSPR_ENABLE_0          (0x0000bbbb)
+#define WSPR_ENABLE_1          (0x00004444)
+#define WSPR_DISABLE_0         (0x0000aaaa)
+#define WSPR_DISABLE_1         (0x00005555)
+
+/* Mailbox */
+#define OMAP16XX_MAILBOX_BASE	(0xfffcf000)
+
+#endif /*  __ASM_ARCH_OMAP16XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h
new file mode 100644
index 0000000..bb8319d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap24xx.h
@@ -0,0 +1,107 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap24xx.h
+ *
+ * This file contains the processor specific definitions
+ * of the TI OMAP24XX.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP24XX_H
+#define __ASM_ARCH_OMAP24XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers. Note also that some of these defines are needed
+ * for omap1 to compile without adding ifdefs.
+ */
+
+#define L4_24XX_BASE		0x48000000
+#define L4_WK_243X_BASE		0x49000000
+#define L3_24XX_BASE		0x68000000
+
+/* interrupt controller */
+#define OMAP24XX_IC_BASE	(L4_24XX_BASE + 0xfe000)
+#define OMAP24XX_IVA_INTC_BASE	0x40000000
+#define IRQ_SIR_IRQ		0x0040
+
+#define OMAP2420_CTRL_BASE	L4_24XX_BASE
+#define OMAP2420_32KSYNCT_BASE	(L4_24XX_BASE + 0x4000)
+#define OMAP2420_PRCM_BASE	(L4_24XX_BASE + 0x8000)
+#define OMAP2420_CM_BASE	(L4_24XX_BASE + 0x8000)
+#define OMAP2420_PRM_BASE	OMAP2420_CM_BASE
+#define OMAP2420_SDRC_BASE	(L3_24XX_BASE + 0x9000)
+#define OMAP2420_SMS_BASE	0x68008000
+
+#define OMAP2430_32KSYNCT_BASE	(L4_WK_243X_BASE + 0x20000)
+#define OMAP2430_PRCM_BASE	(L4_WK_243X_BASE + 0x6000)
+#define OMAP2430_CM_BASE	(L4_WK_243X_BASE + 0x6000)
+#define OMAP2430_PRM_BASE	OMAP2430_CM_BASE
+
+#define OMAP243X_SMS_BASE	0x6C000000
+#define OMAP243X_SDRC_BASE	0x6D000000
+#define OMAP243X_GPMC_BASE	0x6E000000
+#define OMAP243X_SCM_BASE	(L4_WK_243X_BASE + 0x2000)
+#define OMAP243X_CTRL_BASE	OMAP243X_SCM_BASE
+#define OMAP243X_HS_BASE	(L4_24XX_BASE + 0x000ac000)
+
+/* DSP SS */
+#define OMAP2420_DSP_BASE	0x58000000
+#define OMAP2420_DSP_MEM_BASE	(OMAP2420_DSP_BASE + 0x0)
+#define OMAP2420_DSP_IPI_BASE	(OMAP2420_DSP_BASE + 0x1000000)
+#define OMAP2420_DSP_MMU_BASE	(OMAP2420_DSP_BASE + 0x2000000)
+
+#define OMAP243X_DSP_BASE	0x5C000000
+#define OMAP243X_DSP_MEM_BASE	(OMAP243X_DSP_BASE + 0x0)
+#define OMAP243X_DSP_MMU_BASE	(OMAP243X_DSP_BASE + 0x1000000)
+
+/* Mailbox */
+#define OMAP24XX_MAILBOX_BASE	(L4_24XX_BASE + 0x94000)
+
+/* Camera */
+#define OMAP24XX_CAMERA_BASE	(L4_24XX_BASE + 0x52000)
+
+/* Security */
+#define OMAP24XX_SEC_BASE	(L4_24XX_BASE + 0xA0000)
+#define OMAP24XX_SEC_RNG_BASE	(OMAP24XX_SEC_BASE + 0x0000)
+#define OMAP24XX_SEC_DES_BASE	(OMAP24XX_SEC_BASE + 0x2000)
+#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000)
+#define OMAP24XX_SEC_AES_BASE	(OMAP24XX_SEC_BASE + 0x6000)
+#define OMAP24XX_SEC_PKA_BASE	(OMAP24XX_SEC_BASE + 0x8000)
+
+#if defined(CONFIG_ARCH_OMAP2420)
+
+#define OMAP2_32KSYNCT_BASE	OMAP2420_32KSYNCT_BASE
+#define OMAP2_PRCM_BASE		OMAP2420_PRCM_BASE
+#define OMAP2_CM_BASE		OMAP2420_CM_BASE
+#define OMAP2_PRM_BASE		OMAP2420_PRM_BASE
+#define OMAP2_VA_IC_BASE	IO_ADDRESS(OMAP24XX_IC_BASE)
+
+#elif defined(CONFIG_ARCH_OMAP2430)
+
+#define OMAP2_32KSYNCT_BASE	OMAP2430_32KSYNCT_BASE
+#define OMAP2_PRCM_BASE		OMAP2430_PRCM_BASE
+#define OMAP2_CM_BASE		OMAP2430_CM_BASE
+#define OMAP2_PRM_BASE		OMAP2430_PRM_BASE
+#define OMAP2_VA_IC_BASE	IO_ADDRESS(OMAP24XX_IC_BASE)
+
+#endif
+
+#endif /* __ASM_ARCH_OMAP24XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
new file mode 100644
index 0000000..8e0479f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap34xx.h
@@ -0,0 +1,72 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap34xx.h
+ *
+ * This file contains the processor specific definitions of the TI OMAP34XX.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_OMAP34XX_H
+#define __ASM_ARCH_OMAP34XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+
+#define L4_34XX_BASE		0x48000000
+#define L4_WK_34XX_BASE		0x48300000
+#define L4_WK_OMAP_BASE		L4_WK_34XX_BASE
+#define L4_PER_34XX_BASE	0x49000000
+#define L4_PER_OMAP_BASE	L4_PER_34XX_BASE
+#define L4_EMU_34XX_BASE	0x54000000
+#define L4_EMU_BASE		L4_EMU_34XX_BASE
+#define L3_34XX_BASE		0x68000000
+#define L3_OMAP_BASE		L3_34XX_BASE
+
+#define OMAP3430_32KSYNCT_BASE	0x48320000
+#define OMAP3430_CM_BASE	0x48004800
+#define OMAP3430_PRM_BASE	0x48306800
+#define OMAP343X_SMS_BASE	0x6C000000
+#define OMAP343X_SDRC_BASE	0x6D000000
+#define OMAP34XX_GPMC_BASE	0x6E000000
+#define OMAP343X_SCM_BASE	0x48002000
+#define OMAP343X_CTRL_BASE	OMAP343X_SCM_BASE
+
+#define OMAP34XX_IC_BASE	0x48200000
+#define OMAP34XX_IVA_INTC_BASE	0x40000000
+#define OMAP34XX_HSUSB_OTG_BASE	(L4_34XX_BASE + 0xAB000)
+#define OMAP34XX_HSUSB_HOST_BASE	(L4_34XX_BASE + 0x64000)
+#define OMAP34XX_USBTLL_BASE	(L4_34XX_BASE + 0x62000)
+
+
+#if defined(CONFIG_ARCH_OMAP3430)
+
+#define OMAP2_32KSYNCT_BASE		OMAP3430_32KSYNCT_BASE
+#define OMAP2_CM_BASE			OMAP3430_CM_BASE
+#define OMAP2_PRM_BASE			OMAP3430_PRM_BASE
+#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP34XX_IC_BASE)
+
+#endif
+
+#define OMAP34XX_DSP_BASE	0x58000000
+#define OMAP34XX_DSP_MEM_BASE	(OMAP34XX_DSP_BASE + 0x0)
+#define OMAP34XX_DSP_IPI_BASE	(OMAP34XX_DSP_BASE + 0x1000000)
+#define OMAP34XX_DSP_MMU_BASE	(OMAP34XX_DSP_BASE + 0x2000000)
+#endif /* __ASM_ARCH_OMAP34XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap730.h b/arch/arm/plat-omap/include/mach/omap730.h
new file mode 100644
index 0000000..14272bc1
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap730.h
@@ -0,0 +1,102 @@
+/* arch/arm/plat-omap/include/mach/omap730.h
+ *
+ * Hardware definitions for TI OMAP730 processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP730_H
+#define __ASM_ARCH_OMAP730_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP730_DSP_BASE	0xE0000000
+#define OMAP730_DSP_SIZE	0x50000
+#define OMAP730_DSP_START	0xE0000000
+
+#define OMAP730_DSPREG_BASE	0xE1000000
+#define OMAP730_DSPREG_SIZE	SZ_128K
+#define OMAP730_DSPREG_START	0xE1000000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_CONFIG_BASE	0xfffe1000
+#define OMAP730_IO_CONF_0	0xfffe1070
+#define OMAP730_IO_CONF_1	0xfffe1074
+#define OMAP730_IO_CONF_2	0xfffe1078
+#define OMAP730_IO_CONF_3	0xfffe107c
+#define OMAP730_IO_CONF_4	0xfffe1080
+#define OMAP730_IO_CONF_5	0xfffe1084
+#define OMAP730_IO_CONF_6	0xfffe1088
+#define OMAP730_IO_CONF_7	0xfffe108c
+#define OMAP730_IO_CONF_8	0xfffe1090
+#define OMAP730_IO_CONF_9	0xfffe1094
+#define OMAP730_IO_CONF_10	0xfffe1098
+#define OMAP730_IO_CONF_11	0xfffe109c
+#define OMAP730_IO_CONF_12	0xfffe10a0
+#define OMAP730_IO_CONF_13	0xfffe10a4
+
+#define OMAP730_MODE_1		0xfffe1010
+#define OMAP730_MODE_2		0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP730_MODE2_OFFSET	0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_FLASH_CFG_0	0xfffecc10
+#define OMAP730_FLASH_ACFG_0	0xfffecc50
+#define OMAP730_FLASH_CFG_1	0xfffecc14
+#define OMAP730_FLASH_ACFG_1	0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_ICR_BASE	0xfffbb800
+#define OMAP730_DSP_M_CTL	0xfffbb804
+#define OMAP730_DSP_MMU_BASE	0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_PCC_UPLD_CTRL_BASE	(0xfffe0900)
+#define OMAP730_PCC_UPLD_CTRL		(OMAP730_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /*  __ASM_ARCH_OMAP730_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
new file mode 100644
index 0000000..cae037d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omapfb.h
@@ -0,0 +1,395 @@
+/*
+ * File: arch/arm/plat-omap/include/mach/omapfb.h
+ *
+ * Framebuffer driver for TI OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __OMAPFB_H
+#define __OMAPFB_H
+
+#include <asm/ioctl.h>
+#include <asm/types.h>
+
+/* IOCTL commands. */
+
+#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
+#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
+#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
+#define OMAP_IO(num)		_IO('O', num)
+
+#define OMAPFB_MIRROR		OMAP_IOW(31, int)
+#define OMAPFB_SYNC_GFX		OMAP_IO(37)
+#define OMAPFB_VSYNC		OMAP_IO(38)
+#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
+#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
+#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
+#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
+#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
+#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
+#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
+#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
+#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
+#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
+#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
+#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
+#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
+
+#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
+#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
+#define OMAPFB_CAPS_PANEL_MASK		0xff000000
+
+#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
+#define OMAPFB_CAPS_TEARSYNC		0x00002000
+#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
+#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
+#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
+#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
+#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
+#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
+
+/* Values from DSP must map to lower 16-bits */
+#define OMAPFB_FORMAT_MASK		0x00ff
+#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
+#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
+#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
+#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
+#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
+
+#define OMAPFB_EVENT_READY	1
+#define OMAPFB_EVENT_DISABLED	2
+
+#define OMAPFB_MEMTYPE_SDRAM		0
+#define OMAPFB_MEMTYPE_SRAM		1
+#define OMAPFB_MEMTYPE_MAX		1
+
+enum omapfb_color_format {
+	OMAPFB_COLOR_RGB565 = 0,
+	OMAPFB_COLOR_YUV422,
+	OMAPFB_COLOR_YUV420,
+	OMAPFB_COLOR_CLUT_8BPP,
+	OMAPFB_COLOR_CLUT_4BPP,
+	OMAPFB_COLOR_CLUT_2BPP,
+	OMAPFB_COLOR_CLUT_1BPP,
+	OMAPFB_COLOR_RGB444,
+	OMAPFB_COLOR_YUY422,
+};
+
+struct omapfb_update_window {
+	__u32 x, y;
+	__u32 width, height;
+	__u32 format;
+	__u32 out_x, out_y;
+	__u32 out_width, out_height;
+	__u32 reserved[8];
+};
+
+struct omapfb_update_window_old {
+	__u32 x, y;
+	__u32 width, height;
+	__u32 format;
+};
+
+enum omapfb_plane {
+	OMAPFB_PLANE_GFX = 0,
+	OMAPFB_PLANE_VID1,
+	OMAPFB_PLANE_VID2,
+};
+
+enum omapfb_channel_out {
+	OMAPFB_CHANNEL_OUT_LCD = 0,
+	OMAPFB_CHANNEL_OUT_DIGIT,
+};
+
+struct omapfb_plane_info {
+	__u32 pos_x;
+	__u32 pos_y;
+	__u8  enabled;
+	__u8  channel_out;
+	__u8  mirror;
+	__u8  reserved1;
+	__u32 out_width;
+	__u32 out_height;
+	__u32 reserved2[12];
+};
+
+struct omapfb_mem_info {
+	__u32 size;
+	__u8  type;
+	__u8  reserved[3];
+};
+
+struct omapfb_caps {
+	__u32 ctrl;
+	__u32 plane_color;
+	__u32 wnd_color;
+};
+
+enum omapfb_color_key_type {
+	OMAPFB_COLOR_KEY_DISABLED = 0,
+	OMAPFB_COLOR_KEY_GFX_DST,
+	OMAPFB_COLOR_KEY_VID_SRC,
+};
+
+struct omapfb_color_key {
+	__u8  channel_out;
+	__u32 background;
+	__u32 trans_key;
+	__u8  key_type;
+};
+
+enum omapfb_update_mode {
+	OMAPFB_UPDATE_DISABLED = 0,
+	OMAPFB_AUTO_UPDATE,
+	OMAPFB_MANUAL_UPDATE
+};
+
+#ifdef __KERNEL__
+
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/mutex.h>
+
+#include <mach/board.h>
+
+#define OMAP_LCDC_INV_VSYNC             0x0001
+#define OMAP_LCDC_INV_HSYNC             0x0002
+#define OMAP_LCDC_INV_PIX_CLOCK         0x0004
+#define OMAP_LCDC_INV_OUTPUT_EN         0x0008
+#define OMAP_LCDC_HSVS_RISING_EDGE      0x0010
+#define OMAP_LCDC_HSVS_OPPOSITE         0x0020
+
+#define OMAP_LCDC_SIGNAL_MASK		0x003f
+
+#define OMAP_LCDC_PANEL_TFT		0x0100
+
+#define OMAPFB_PLANE_XRES_MIN		8
+#define OMAPFB_PLANE_YRES_MIN		8
+
+#ifdef CONFIG_ARCH_OMAP1
+#define OMAPFB_PLANE_NUM		1
+#else
+#define OMAPFB_PLANE_NUM		3
+#endif
+
+struct omapfb_device;
+
+struct lcd_panel {
+	const char	*name;
+	int		config;		/* TFT/STN, signal inversion */
+	int		bpp;		/* Pixel format in fb mem */
+	int		data_lines;	/* Lines on LCD HW interface */
+
+	int		x_res, y_res;
+	int		pixel_clock;	/* In kHz */
+	int		hsw;		/* Horizontal synchronization
+					   pulse width */
+	int		hfp;		/* Horizontal front porch */
+	int		hbp;		/* Horizontal back porch */
+	int		vsw;		/* Vertical synchronization
+					   pulse width */
+	int		vfp;		/* Vertical front porch */
+	int		vbp;		/* Vertical back porch */
+	int		acb;		/* ac-bias pin frequency */
+	int		pcd;		/* pixel clock divider.
+					   Obsolete use pixel_clock instead */
+
+	int		(*init)		(struct lcd_panel *panel,
+					 struct omapfb_device *fbdev);
+	void		(*cleanup)	(struct lcd_panel *panel);
+	int		(*enable)	(struct lcd_panel *panel);
+	void		(*disable)	(struct lcd_panel *panel);
+	unsigned long	(*get_caps)	(struct lcd_panel *panel);
+	int		(*set_bklight_level)(struct lcd_panel *panel,
+					     unsigned int level);
+	unsigned int	(*get_bklight_level)(struct lcd_panel *panel);
+	unsigned int	(*get_bklight_max)  (struct lcd_panel *panel);
+	int		(*run_test)	(struct lcd_panel *panel, int test_num);
+};
+
+struct extif_timings {
+	int cs_on_time;
+	int cs_off_time;
+	int we_on_time;
+	int we_off_time;
+	int re_on_time;
+	int re_off_time;
+	int we_cycle_time;
+	int re_cycle_time;
+	int cs_pulse_width;
+	int access_time;
+
+	int clk_div;
+
+	u32 tim[5];		/* set by extif->convert_timings */
+
+	int converted;
+};
+
+struct lcd_ctrl_extif {
+	int  (*init)		(struct omapfb_device *fbdev);
+	void (*cleanup)		(void);
+	void (*get_clk_info)	(u32 *clk_period, u32 *max_clk_div);
+	unsigned long (*get_max_tx_rate)(void);
+	int  (*convert_timings)	(struct extif_timings *timings);
+	void (*set_timings)	(const struct extif_timings *timings);
+	void (*set_bits_per_cycle)(int bpc);
+	void (*write_command)	(const void *buf, unsigned int len);
+	void (*read_data)	(void *buf, unsigned int len);
+	void (*write_data)	(const void *buf, unsigned int len);
+	void (*transfer_area)	(int width, int height,
+				 void (callback)(void * data), void *data);
+	int  (*setup_tearsync)	(unsigned pin_cnt,
+				 unsigned hs_pulse_time, unsigned vs_pulse_time,
+				 int hs_pol_inv, int vs_pol_inv, int div);
+	int  (*enable_tearsync) (int enable, unsigned line);
+
+	unsigned long		max_transmit_size;
+};
+
+struct omapfb_notifier_block {
+	struct notifier_block	nb;
+	void			*data;
+	int			plane_idx;
+};
+
+typedef int (*omapfb_notifier_callback_t)(struct notifier_block *,
+					  unsigned long event,
+					  void *fbi);
+
+struct omapfb_mem_region {
+	dma_addr_t	paddr;
+	void		*vaddr;
+	unsigned long	size;
+	u8		type;		/* OMAPFB_PLANE_MEM_* */
+	unsigned	alloc:1;	/* allocated by the driver */
+	unsigned	map:1;		/* kernel mapped by the driver */
+};
+
+struct omapfb_mem_desc {
+	int				region_cnt;
+	struct omapfb_mem_region	region[OMAPFB_PLANE_NUM];
+};
+
+struct lcd_ctrl {
+	const char	*name;
+	void		*data;
+
+	int		(*init)		  (struct omapfb_device *fbdev,
+					   int ext_mode,
+					   struct omapfb_mem_desc *req_md);
+	void		(*cleanup)	  (void);
+	void		(*bind_client)	  (struct omapfb_notifier_block *nb);
+	void		(*get_caps)	  (int plane, struct omapfb_caps *caps);
+	int		(*set_update_mode)(enum omapfb_update_mode mode);
+	enum omapfb_update_mode (*get_update_mode)(void);
+	int		(*setup_plane)	  (int plane, int channel_out,
+					   unsigned long offset,
+					   int screen_width,
+					   int pos_x, int pos_y, int width,
+					   int height, int color_mode);
+	int		(*setup_mem)	  (int plane, size_t size,
+					   int mem_type, unsigned long *paddr);
+	int		(*mmap)		  (struct fb_info *info,
+					   struct vm_area_struct *vma);
+	int		(*set_scale)	  (int plane,
+					   int orig_width, int orig_height,
+					   int out_width, int out_height);
+	int		(*enable_plane)	  (int plane, int enable);
+	int		(*update_window)  (struct fb_info *fbi,
+					   struct omapfb_update_window *win,
+					   void (*callback)(void *),
+					   void *callback_data);
+	void		(*sync)		  (void);
+	void		(*suspend)	  (void);
+	void		(*resume)	  (void);
+	int		(*run_test)	  (int test_num);
+	int		(*setcolreg)	  (u_int regno, u16 red, u16 green,
+					   u16 blue, u16 transp,
+					   int update_hw_mem);
+	int		(*set_color_key)  (struct omapfb_color_key *ck);
+	int		(*get_color_key)  (struct omapfb_color_key *ck);
+};
+
+enum omapfb_state {
+	OMAPFB_DISABLED	= 0,
+	OMAPFB_SUSPENDED= 99,
+	OMAPFB_ACTIVE	= 100
+};
+
+struct omapfb_plane_struct {
+	int				idx;
+	struct omapfb_plane_info	info;
+	enum omapfb_color_format	color_mode;
+	struct omapfb_device		*fbdev;
+};
+
+struct omapfb_device {
+	int			state;
+	int                     ext_lcdc;               /* Using external
+                                                           LCD controller */
+	struct mutex		rqueue_mutex;
+
+	int			palette_size;
+	u32			pseudo_palette[17];
+
+	struct lcd_panel	*panel;			/* LCD panel */
+	struct lcd_ctrl         *ctrl;			/* LCD controller */
+	struct lcd_ctrl		*int_ctrl;		/* internal LCD ctrl */
+	struct lcd_ctrl_extif	*ext_if;		/* LCD ctrl external
+							   interface */
+	struct device		*dev;
+	struct fb_var_screeninfo	new_var;	/* for mode changes */
+
+	struct omapfb_mem_desc		mem_desc;
+	struct fb_info			*fb_info[OMAPFB_PLANE_NUM];
+};
+
+struct omapfb_platform_data {
+	struct omap_lcd_config		lcd;
+	struct omapfb_mem_desc		mem_desc;
+	void				*ctrl_platform_data;
+};
+
+#ifdef CONFIG_ARCH_OMAP1
+extern struct lcd_ctrl omap1_lcd_ctrl;
+#else
+extern struct lcd_ctrl omap2_disp_ctrl;
+#endif
+
+extern void omapfb_register_panel(struct lcd_panel *panel);
+extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
+extern void omapfb_notify_clients(struct omapfb_device *fbdev,
+				  unsigned long event);
+extern int  omapfb_register_client(struct omapfb_notifier_block *nb,
+				   omapfb_notifier_callback_t callback,
+				   void *callback_data);
+extern int  omapfb_unregister_client(struct omapfb_notifier_block *nb);
+extern int  omapfb_update_window_async(struct fb_info *fbi,
+				       struct omapfb_update_window *win,
+				       void (*callback)(void *),
+				       void *callback_data);
+
+/* in arch/arm/plat-omap/fb.c */
+extern void omapfb_set_ctrl_platform_data(void *pdata);
+
+#endif /* __KERNEL__ */
+
+#endif /* __OMAPFB_H */
diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/mach/onenand.h
new file mode 100644
index 0000000..d57f202
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/onenand.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/plat-omap/include/mach/onenand.h
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Juha Yrjola
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mtd/partitions.h>
+
+struct omap_onenand_platform_data {
+	int			cs;
+	int			gpio_irq;
+	struct mtd_partition	*parts;
+	int			nr_parts;
+	int                     (*onenand_setup)(void __iomem *);
+	int			dma_channel;
+};
diff --git a/arch/arm/plat-omap/include/mach/param.h b/arch/arm/plat-omap/include/mach/param.h
new file mode 100644
index 0000000..1eb4dc3
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/param.h
@@ -0,0 +1,8 @@
+/*
+ *  arch/arm/plat-omap/include/mach/param.h
+ *
+ */
+
+#ifdef CONFIG_OMAP_32K_TIMER_HZ
+#define HZ	CONFIG_OMAP_32K_TIMER_HZ
+#endif
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h
new file mode 100644
index 0000000..bfa0932
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/pm.h
@@ -0,0 +1,356 @@
+/*
+ * arch/arm/plat-omap/include/mach/pm.h
+ *
+ * Header file for OMAP Power Management Routines
+ *
+ * Author: MontaVista Software, Inc.
+ *	   support@mvista.com
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ *
+ * Cleanup 2004 for Linux 2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_PM_H
+#define __ASM_ARCH_OMAP_PM_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Register and offset definitions to be used in PM assembler code
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_ASM_BASE		io_p2v(0xfffece00)
+#define ARM_IDLECT1_ASM_OFFSET		0x04
+#define ARM_IDLECT2_ASM_OFFSET		0x08
+
+#define TCMIF_ASM_BASE			io_p2v(0xfffecc00)
+#define EMIFS_CONFIG_ASM_OFFSET		0x0c
+#define EMIFF_SDRAM_CONFIG_ASM_OFFSET	0x20
+
+/*
+ * ----------------------------------------------------------------------------
+ * Power management bitmasks
+ * ----------------------------------------------------------------------------
+ */
+#define IDLE_WAIT_CYCLES		0x00000fff
+#define PERIPHERAL_ENABLE		0x2
+
+#define SELF_REFRESH_MODE		0x0c000001
+#define IDLE_EMIFS_REQUEST		0xc
+#define MODEM_32K_EN			0x1
+#define PER_EN				0x1
+
+#define CPU_SUSPEND_SIZE		200
+#define ULPD_LOW_PWR_EN			0x0001
+#define ULPD_DEEP_SLEEP_TRANSITION_EN	0x0010
+#define ULPD_SETUP_ANALOG_CELL_3_VAL	0
+#define ULPD_POWER_CTRL_REG_VAL		0x0219
+
+#define DSP_IDLE_DELAY			10
+#define DSP_IDLE			0x0040
+#define DSP_RST				0x0004
+#define DSP_ENABLE			0x0002
+#define SUFFICIENT_DSP_RESET_TIME	1000
+#define DEFAULT_MPUI_CONFIG		0x05cf
+#define ENABLE_XORCLK			0x2
+#define DSP_CLOCK_ENABLE		0x2000
+#define DSP_IDLE_MODE			0x2
+#define TC_IDLE_REQUEST			(0x0000000c)
+
+#define IRQ_LEVEL2			(1<<0)
+#define IRQ_KEYBOARD			(1<<1)
+#define IRQ_UART2			(1<<15)
+
+#define PDE_BIT				0x08
+#define PWD_EN_BIT			0x04
+#define EN_PERCK_BIT			0x04
+
+#define OMAP1510_DEEP_SLEEP_REQUEST	0x0ec7
+#define OMAP1510_BIG_SLEEP_REQUEST	0x0cc5
+#define OMAP1510_IDLE_LOOP_REQUEST	0x0c00
+#define OMAP1510_IDLE_CLOCK_DOMAINS	0x2
+
+/* Both big sleep and deep sleep use same values. Difference is in ULPD. */
+#define OMAP1610_IDLECT1_SLEEP_VAL	0x13c7
+#define OMAP1610_IDLECT2_SLEEP_VAL	0x09c7
+#define OMAP1610_IDLECT3_VAL		0x3f
+#define OMAP1610_IDLECT3_SLEEP_ORMASK	0x2c
+#define OMAP1610_IDLECT3		0xfffece24
+#define OMAP1610_IDLE_LOOP_REQUEST	0x0400
+
+#define OMAP730_IDLECT1_SLEEP_VAL	0x16c7
+#define OMAP730_IDLECT2_SLEEP_VAL	0x09c7
+#define OMAP730_IDLECT3_VAL		0x3f
+#define OMAP730_IDLECT3		0xfffece24
+#define OMAP730_IDLE_LOOP_REQUEST	0x0C00
+
+#if     !defined(CONFIG_ARCH_OMAP730) && \
+	!defined(CONFIG_ARCH_OMAP15XX) && \
+	!defined(CONFIG_ARCH_OMAP16XX) && \
+	!defined(CONFIG_ARCH_OMAP24XX)
+#error "Power management for this processor not implemented yet"
+#endif
+
+#ifndef __ASSEMBLER__
+
+#include <linux/clk.h>
+
+extern void prevent_idle_sleep(void);
+extern void allow_idle_sleep(void);
+
+/**
+ * clk_deny_idle - Prevents the clock from being idled during MPU idle
+ * @clk: clock signal handle
+ */
+void clk_deny_idle(struct clk *clk);
+
+/**
+ * clk_allow_idle - Counters previous clk_deny_idle
+ * @clk: clock signal handle
+ */
+void clk_deny_idle(struct clk *clk);
+
+extern void omap_pm_idle(void);
+extern void omap_pm_suspend(void);
+extern void omap730_cpu_suspend(unsigned short, unsigned short);
+extern void omap1510_cpu_suspend(unsigned short, unsigned short);
+extern void omap1610_cpu_suspend(unsigned short, unsigned short);
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision);
+extern void omap730_idle_loop_suspend(void);
+extern void omap1510_idle_loop_suspend(void);
+extern void omap1610_idle_loop_suspend(void);
+extern void omap24xx_idle_loop_suspend(void);
+
+extern unsigned int omap730_cpu_suspend_sz;
+extern unsigned int omap1510_cpu_suspend_sz;
+extern unsigned int omap1610_cpu_suspend_sz;
+extern unsigned int omap24xx_cpu_suspend_sz;
+extern unsigned int omap730_idle_loop_suspend_sz;
+extern unsigned int omap1510_idle_loop_suspend_sz;
+extern unsigned int omap1610_idle_loop_suspend_sz;
+extern unsigned int omap24xx_idle_loop_suspend_sz;
+
+#ifdef CONFIG_OMAP_SERIAL_WAKE
+extern void omap_serial_wake_trigger(int enable);
+#else
+#define omap_serial_wakeup_init()	{}
+#define omap_serial_wake_trigger(x)	{}
+#endif	/* CONFIG_OMAP_SERIAL_WAKE */
+
+#define ARM_SAVE(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] = omap_readl(x)
+#define ARM_RESTORE(x) omap_writel((arm_sleep_save[ARM_SLEEP_SAVE_##x]), (x))
+#define ARM_SHOW(x) arm_sleep_save[ARM_SLEEP_SAVE_##x]
+
+#define DSP_SAVE(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] = __raw_readw(x)
+#define DSP_RESTORE(x) __raw_writew((dsp_sleep_save[DSP_SLEEP_SAVE_##x]), (x))
+#define DSP_SHOW(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x]
+
+#define ULPD_SAVE(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] = omap_readw(x)
+#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
+#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
+
+#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x))
+#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]
+
+#define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
+#define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]
+
+#define MPUI1610_SAVE(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
+#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
+
+#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x
+#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
+#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
+
+/*
+ * List of global OMAP registers to preserve.
+ * More ones like CP and general purpose register values are preserved
+ * with the stack pointer in sleep.S.
+ */
+
+enum arm_save_state {
+	ARM_SLEEP_SAVE_START = 0,
+	/*
+	 * MPU control registers 32 bits
+	 */
+	ARM_SLEEP_SAVE_ARM_CKCTL,
+	ARM_SLEEP_SAVE_ARM_IDLECT1,
+	ARM_SLEEP_SAVE_ARM_IDLECT2,
+	ARM_SLEEP_SAVE_ARM_IDLECT3,
+	ARM_SLEEP_SAVE_ARM_EWUPCT,
+	ARM_SLEEP_SAVE_ARM_RSTCT1,
+	ARM_SLEEP_SAVE_ARM_RSTCT2,
+	ARM_SLEEP_SAVE_ARM_SYSST,
+	ARM_SLEEP_SAVE_SIZE
+};
+
+enum dsp_save_state {
+	DSP_SLEEP_SAVE_START = 0,
+	/*
+	 * DSP registers 16 bits
+	 */
+	DSP_SLEEP_SAVE_DSP_IDLECT2,
+	DSP_SLEEP_SAVE_SIZE
+};
+
+enum ulpd_save_state {
+	ULPD_SLEEP_SAVE_START = 0,
+	/*
+	 * ULPD registers 16 bits
+	 */
+	ULPD_SLEEP_SAVE_ULPD_IT_STATUS,
+	ULPD_SLEEP_SAVE_ULPD_CLOCK_CTRL,
+	ULPD_SLEEP_SAVE_ULPD_SOFT_REQ,
+	ULPD_SLEEP_SAVE_ULPD_STATUS_REQ,
+	ULPD_SLEEP_SAVE_ULPD_DPLL_CTRL,
+	ULPD_SLEEP_SAVE_ULPD_POWER_CTRL,
+	ULPD_SLEEP_SAVE_SIZE
+};
+
+enum mpui1510_save_state {
+	MPUI1510_SLEEP_SAVE_START = 0,
+	/*
+	 * MPUI registers 32 bits
+	 */
+	MPUI1510_SLEEP_SAVE_MPUI_CTRL,
+	MPUI1510_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+	MPUI1510_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+	MPUI1510_SLEEP_SAVE_MPUI_DSP_STATUS,
+	MPUI1510_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+	MPUI1510_SLEEP_SAVE_EMIFS_CONFIG,
+	MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR,
+	MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR,
+#if defined(CONFIG_ARCH_OMAP15XX)
+	MPUI1510_SLEEP_SAVE_SIZE
+#else
+	MPUI1510_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+enum mpui730_save_state {
+	MPUI730_SLEEP_SAVE_START = 0,
+	/*
+	 * MPUI registers 32 bits
+	 */
+	MPUI730_SLEEP_SAVE_MPUI_CTRL,
+	MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+	MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+	MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS,
+	MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+	MPUI730_SLEEP_SAVE_EMIFS_CONFIG,
+	MPUI730_SLEEP_SAVE_OMAP_IH1_MIR,
+	MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR,
+	MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR,
+#if defined(CONFIG_ARCH_OMAP730)
+	MPUI730_SLEEP_SAVE_SIZE
+#else
+	MPUI730_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+enum mpui1610_save_state {
+	MPUI1610_SLEEP_SAVE_START = 0,
+	/*
+	 * MPUI registers 32 bits
+	 */
+	MPUI1610_SLEEP_SAVE_MPUI_CTRL,
+	MPUI1610_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+	MPUI1610_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+	MPUI1610_SLEEP_SAVE_MPUI_DSP_STATUS,
+	MPUI1610_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+	MPUI1610_SLEEP_SAVE_EMIFS_CONFIG,
+	MPUI1610_SLEEP_SAVE_OMAP_IH1_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_0_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_1_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_2_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_3_MIR,
+#if defined(CONFIG_ARCH_OMAP16XX)
+	MPUI1610_SLEEP_SAVE_SIZE
+#else
+	MPUI1610_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+enum omap24xx_save_state {
+	OMAP24XX_SLEEP_SAVE_START = 0,
+	OMAP24XX_SLEEP_SAVE_INTC_MIR0,
+	OMAP24XX_SLEEP_SAVE_INTC_MIR1,
+	OMAP24XX_SLEEP_SAVE_INTC_MIR2,
+
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU,
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX,
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP,
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM,
+
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU,
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE,
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX,
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP,
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM,
+
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM,
+
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM,
+
+	OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
+	OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
+	OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
+	OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1,
+	OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1,
+	OMAP24XX_SLEEP_SAVE_GPIO3_OE,
+	OMAP24XX_SLEEP_SAVE_GPIO4_OE,
+	OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT,
+	OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT,
+	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2,
+	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX,
+	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX,
+	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0,
+	OMAP24XX_SLEEP_SAVE_SIZE
+};
+
+#endif /* ASSEMBLER */
+#endif /* __ASM_ARCH_OMAP_PM_H */
diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h
new file mode 100644
index 0000000..56eba0f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/prcm.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/plat-omap/include/mach/prcm.h
+ *
+ * Access definations for use in OMAP24XX clock and power management
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
+#define __ASM_ARM_ARCH_DPM_PRCM_H
+
+u32 omap_prcm_get_reset_sources(void);
+
+#endif
+
+
+
+
+
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
new file mode 100644
index 0000000..787b7ac
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -0,0 +1,75 @@
+#ifndef ____ASM_ARCH_SDRC_H
+#define ____ASM_ARCH_SDRC_H
+
+/*
+ * OMAP2/3 SDRC/SMS register definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/io.h>
+
+/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
+
+#define SDRC_SYSCONFIG		0x010
+#define SDRC_DLLA_CTRL		0x060
+#define SDRC_DLLA_STATUS	0x064
+#define SDRC_DLLB_CTRL		0x068
+#define SDRC_DLLB_STATUS	0x06C
+#define SDRC_POWER		0x070
+#define SDRC_MR_0		0x084
+#define SDRC_RFR_CTRL_0		0x0a4
+
+/*
+ * These values represent the number of memory clock cycles between
+ * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
+ * rows per device, and include a subtraction of a 50 cycle window in the
+ * event that the autorefresh command is delayed due to other SDRC activity.
+ * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
+ * counter reaches 0.
+ *
+ * These represent optimal values for common parts, it won't work for all.
+ * As long as you scale down, most parameters are still work, they just
+ * become sub-optimal. The RFR value goes in the opposite direction. If you
+ * don't adjust it down as your clock period increases the refresh interval
+ * will not be met. Setting all parameters for complete worst case may work,
+ * but may cut memory performance by 2x. Due to errata the DLLs need to be
+ * unlocked and their value needs run time calibration.	A dynamic call is
+ * need for that as no single right value exists acorss production samples.
+ *
+ * Only the FULL speed values are given. Current code is such that rate
+ * changes must be made at DPLLoutx2. The actual value adjustment for low
+ * frequency operation will be handled by omap_set_performance()
+ *
+ * By having the boot loader boot up in the fastest L4 speed available likely
+ * will result in something which you can switch between.
+ */
+#define SDRC_RFR_CTRL_165MHz	(0x00044c00 | 1)
+#define SDRC_RFR_CTRL_133MHz	(0x0003de00 | 1)
+#define SDRC_RFR_CTRL_100MHz	(0x0002da01 | 1)
+#define SDRC_RFR_CTRL_110MHz	(0x0002da01 | 1) /* Need to calc */
+#define SDRC_RFR_CTRL_BYPASS	(0x00005000 | 1) /* Need to calc */
+
+
+/*
+ * SMS register access
+ */
+
+
+#define OMAP242X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+
+/* SMS register offsets - read/write with sms_{read,write}_reg() */
+
+#define SMS_SYSCONFIG		0x010
+/* REVISIT: fill in other SMS registers here */
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
new file mode 100644
index 0000000..cc6bfa5
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -0,0 +1,37 @@
+/*
+ *  arch/arm/plat-omap/include/mach/serial.h
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#if defined(CONFIG_ARCH_OMAP1)
+/* OMAP1 serial ports */
+#define OMAP_UART1_BASE		0xfffb0000
+#define OMAP_UART2_BASE		0xfffb0800
+#define OMAP_UART3_BASE		0xfffb9800
+#elif defined(CONFIG_ARCH_OMAP2)
+/* OMAP2 serial ports */
+#define OMAP_UART1_BASE		0x4806a000
+#define OMAP_UART2_BASE		0x4806c000
+#define OMAP_UART3_BASE		0x4806e000
+#endif
+
+#define OMAP_MAX_NR_PORTS	3
+#define OMAP1510_BASE_BAUD	(12000000/16)
+#define OMAP16XX_BASE_BAUD	(48000000/16)
+
+#define is_omap_port(p)	({int __ret = 0;			\
+			if (p == IO_ADDRESS(OMAP_UART1_BASE) ||	\
+			    p == IO_ADDRESS(OMAP_UART2_BASE) ||	\
+			    p == IO_ADDRESS(OMAP_UART3_BASE))	\
+				__ret = 1;			\
+			__ret;					\
+			})
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
new file mode 100644
index 0000000..e093234
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/plat-omap/include/mach/sram.h
+ *
+ * Interface for functions that need to be run in internal SRAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_SRAM_H
+#define __ARCH_ARM_OMAP_SRAM_H
+
+extern int __init omap_sram_init(void);
+extern void * omap_sram_push(void * start, unsigned long size);
+extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
+
+extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+				u32 base_cs, u32 force_unlock);
+extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+				      u32 mem_type);
+extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+/* Do not use these */
+extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap1_sram_reprogram_clock_sz;
+
+extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap24xx_sram_reprogram_clock_sz;
+
+extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+						u32 base_cs, u32 force_unlock);
+extern unsigned long omap242x_sram_ddr_init_sz;
+
+extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+						int bypass);
+extern unsigned long omap242x_sram_set_prcm_sz;
+
+extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+						u32 mem_type);
+extern unsigned long omap242x_sram_reprogram_sdrc_sz;
+
+
+extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+						u32 base_cs, u32 force_unlock);
+extern unsigned long omap243x_sram_ddr_init_sz;
+
+extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+						int bypass);
+extern unsigned long omap243x_sram_set_prcm_sz;
+
+extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+						u32 mem_type);
+extern unsigned long omap243x_sram_reprogram_sdrc_sz;
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h
new file mode 100644
index 0000000..06a28c7
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/system.h
@@ -0,0 +1,49 @@
+/*
+ * Copied from arch/arm/mach-sa1100/include/mach/system.h
+ * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+#include <linux/clk.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+
+#ifndef CONFIG_MACH_VOICEBLUE
+#define voiceblue_reset()		do {} while (0)
+#endif
+
+extern void omap_prcm_arch_reset(char mode);
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void omap1_arch_reset(char mode)
+{
+	/*
+	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
+	 * "Global Software Reset Affects Traffic Controller Frequency".
+	 */
+	if (cpu_is_omap5912()) {
+		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4),
+				 DPLL_CTL);
+		omap_writew(0x8, ARM_RSTCT1);
+	}
+
+	if (machine_is_voiceblue())
+		voiceblue_reset();
+	else
+		omap_writew(1, ARM_RSTCT1);
+}
+
+static inline void arch_reset(char mode)
+{
+	if (!cpu_is_omap24xx())
+		omap1_arch_reset(mode);
+	else
+		omap_prcm_arch_reset(mode);
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/tc.h b/arch/arm/plat-omap/include/mach/tc.h
new file mode 100644
index 0000000..d2fcd78
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/tc.h
@@ -0,0 +1,106 @@
+/*
+ * arch/arm/plat-omap/include/mach/tc.h
+ *
+ * OMAP Traffic Controller
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __ASM_ARCH_TC_H
+#define __ASM_ARCH_TC_H
+
+#define TCMIF_BASE		0xfffecc00
+#define OMAP_TC_OCPT1_PRIOR	(TCMIF_BASE + 0x00)
+#define OMAP_TC_EMIFS_PRIOR	(TCMIF_BASE + 0x04)
+#define OMAP_TC_EMIFF_PRIOR	(TCMIF_BASE + 0x08)
+#define EMIFS_CONFIG		(TCMIF_BASE + 0x0c)
+#define EMIFS_CS0_CONFIG	(TCMIF_BASE + 0x10)
+#define EMIFS_CS1_CONFIG	(TCMIF_BASE + 0x14)
+#define EMIFS_CS2_CONFIG	(TCMIF_BASE + 0x18)
+#define EMIFS_CS3_CONFIG	(TCMIF_BASE + 0x1c)
+#define EMIFF_SDRAM_CONFIG	(TCMIF_BASE + 0x20)
+#define EMIFF_MRS		(TCMIF_BASE + 0x24)
+#define TC_TIMEOUT1		(TCMIF_BASE + 0x28)
+#define TC_TIMEOUT2		(TCMIF_BASE + 0x2c)
+#define TC_TIMEOUT3		(TCMIF_BASE + 0x30)
+#define TC_ENDIANISM		(TCMIF_BASE + 0x34)
+#define EMIFF_SDRAM_CONFIG_2	(TCMIF_BASE + 0x3c)
+#define EMIF_CFG_DYNAMIC_WS	(TCMIF_BASE + 0x40)
+#define EMIFS_ACS0		(TCMIF_BASE + 0x50)
+#define EMIFS_ACS1		(TCMIF_BASE + 0x54)
+#define EMIFS_ACS2		(TCMIF_BASE + 0x58)
+#define EMIFS_ACS3		(TCMIF_BASE + 0x5c)
+#define OMAP_TC_OCPT2_PRIOR	(TCMIF_BASE + 0xd0)
+
+/* external EMIFS chipselect regions */
+#define	OMAP_CS0_PHYS		0x00000000
+#define	OMAP_CS0_SIZE		SZ_64M
+
+#define	OMAP_CS1_PHYS		0x04000000
+#define	OMAP_CS1_SIZE		SZ_64M
+
+#define	OMAP_CS1A_PHYS		OMAP_CS1_PHYS
+#define	OMAP_CS1A_SIZE		SZ_32M
+
+#define	OMAP_CS1B_PHYS		(OMAP_CS1A_PHYS + OMAP_CS1A_SIZE)
+#define	OMAP_CS1B_SIZE		SZ_32M
+
+#define	OMAP_CS2_PHYS		0x08000000
+#define	OMAP_CS2_SIZE		SZ_64M
+
+#define	OMAP_CS2A_PHYS		OMAP_CS2_PHYS
+#define	OMAP_CS2A_SIZE		SZ_32M
+
+#define	OMAP_CS2B_PHYS		(OMAP_CS2A_PHYS + OMAP_CS2A_SIZE)
+#define	OMAP_CS2B_SIZE		SZ_32M
+
+#define	OMAP_CS3_PHYS		0x0c000000
+#define	OMAP_CS3_SIZE		SZ_64M
+
+#ifndef	__ASSEMBLER__
+
+/* EMIF Slow Interface Configuration Register */
+#define OMAP_EMIFS_CONFIG_FR		(1 << 4)
+#define OMAP_EMIFS_CONFIG_PDE		(1 << 3)
+#define OMAP_EMIFS_CONFIG_PWD_EN	(1 << 2)
+#define OMAP_EMIFS_CONFIG_BM		(1 << 1)
+#define OMAP_EMIFS_CONFIG_WP		(1 << 0)
+
+#define EMIFS_CCS(n)		(EMIFS_CS0_CONFIG + (4 * (n)))
+#define EMIFS_ACS(n)		(EMIFS_ACS0 + (4 * (n)))
+
+/* Almost all documentation for chip and board memory maps assumes
+ * BM is clear.  Most devel boards have a switch to control booting
+ * from NOR flash (using external chipselect 3) rather than mask ROM,
+ * which uses BM to interchange the physical CS0 and CS3 addresses.
+ */
+static inline u32 omap_cs0_phys(void)
+{
+	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+			?  OMAP_CS3_PHYS : 0;
+}
+
+static inline u32 omap_cs3_phys(void)
+{
+	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+			? 0 : OMAP_CS3_PHYS;
+}
+
+#endif	/* __ASSEMBLER__ */
+
+#endif	/* __ASM_ARCH_TC_H */
diff --git a/arch/arm/plat-omap/include/mach/timex.h b/arch/arm/plat-omap/include/mach/timex.h
new file mode 100644
index 0000000..6d35767
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/timex.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/plat-omap/include/mach/timex.h
+ *
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author:  Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(__ASM_ARCH_OMAP_TIMEX_H)
+#define __ASM_ARCH_OMAP_TIMEX_H
+
+/*
+ * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer,
+ * and that's why the CLOCK_TICK_RATE is not 32768.
+ */
+#ifdef CONFIG_OMAP_32K_TIMER
+#define CLOCK_TICK_RATE		(CONFIG_OMAP_32K_TIMER_HZ)
+#else
+#define CLOCK_TICK_RATE		(HZ * 100000UL)
+#endif
+
+#endif /* __ASM_ARCH_OMAP_TIMEX_H */
diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/mach/uncompress.h
new file mode 100644
index 0000000..0814c5f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/uncompress.h
@@ -0,0 +1,83 @@
+/*
+ * arch/arm/plat-omap/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Initially based on:
+ * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Rewritten by:
+ * Author: <source@mvista.com>
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+#include <mach/serial.h>
+
+unsigned int system_rev;
+
+#define UART_OMAP_MDR1		0x08	/* mode definition register */
+#define OMAP_ID_730		0x355F
+#define ID_MASK			0x7fff
+#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
+#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
+
+static void putc(int c)
+{
+	volatile u8 * uart = 0;
+	int shift = 2;
+
+#ifdef CONFIG_MACH_OMAP_PALMTE
+	return;
+#endif
+
+#ifdef CONFIG_ARCH_OMAP
+#ifdef	CONFIG_OMAP_LL_DEBUG_UART3
+	uart = (volatile u8 *)(OMAP_UART3_BASE);
+#elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
+	uart = (volatile u8 *)(OMAP_UART2_BASE);
+#else
+	uart = (volatile u8 *)(OMAP_UART1_BASE);
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1
+	/* Determine which serial port to use */
+	do {
+		/* MMU is not on, so cpu_is_omapXXXX() won't work here */
+		unsigned int omap_id = omap_get_id();
+
+		if (omap_id == OMAP_ID_730)
+			shift = 0;
+
+		if (check_port(uart, shift))
+			break;
+		/* Silent boot if no serial ports are enabled. */
+		return;
+	} while (0);
+#endif /* CONFIG_ARCH_OMAP1 */
+#endif
+
+	/*
+	 * Now, xmit each character
+	 */
+	while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
+		barrier();
+	uart[UART_TX << shift] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h
new file mode 100644
index 0000000..a56a610
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/usb.h
@@ -0,0 +1,141 @@
+// include/asm-arm/mach-omap/usb.h
+
+#ifndef	__ASM_ARCH_OMAP_USB_H
+#define	__ASM_ARCH_OMAP_USB_H
+
+#include <mach/board.h>
+
+/*-------------------------------------------------------------------------*/
+
+#define OMAP1_OTG_BASE			0xfffb0400
+#define OMAP1_UDC_BASE			0xfffb4000
+#define OMAP1_OHCI_BASE			0xfffba000
+
+#define OMAP2_OHCI_BASE			0x4805e000
+#define OMAP2_UDC_BASE			0x4805e200
+#define OMAP2_OTG_BASE			0x4805e300
+
+#ifdef CONFIG_ARCH_OMAP1
+
+#define OTG_BASE			OMAP1_OTG_BASE
+#define UDC_BASE			OMAP1_UDC_BASE
+#define OMAP_OHCI_BASE			OMAP1_OHCI_BASE
+
+#else
+
+#define OTG_BASE			OMAP2_OTG_BASE
+#define UDC_BASE			OMAP2_UDC_BASE
+#define OMAP_OHCI_BASE			OMAP2_OHCI_BASE
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * OTG and transceiver registers, for OMAPs starting with ARM926
+ */
+#define OTG_REV				(OTG_BASE + 0x00)
+#define OTG_SYSCON_1			(OTG_BASE + 0x04)
+#	define	 USB2_TRX_MODE(w)	(((w)>>24)&0x07)
+#	define	 USB1_TRX_MODE(w)	(((w)>>20)&0x07)
+#	define	 USB0_TRX_MODE(w)	(((w)>>16)&0x07)
+#	define	 OTG_IDLE_EN		(1 << 15)
+#	define	 HST_IDLE_EN		(1 << 14)
+#	define	 DEV_IDLE_EN		(1 << 13)
+#	define	 OTG_RESET_DONE		(1 << 2)
+#	define	 OTG_SOFT_RESET		(1 << 1)
+#define OTG_SYSCON_2			(OTG_BASE + 0x08)
+#	define	 OTG_EN			(1 << 31)
+#	define	 USBX_SYNCHRO		(1 << 30)
+#	define	 OTG_MST16		(1 << 29)
+#	define	 SRP_GPDATA		(1 << 28)
+#	define	 SRP_GPDVBUS		(1 << 27)
+#	define	 SRP_GPUVBUS(w)		(((w)>>24)&0x07)
+#	define	 A_WAIT_VRISE(w)	(((w)>>20)&0x07)
+#	define	 B_ASE_BRST(w)		(((w)>>16)&0x07)
+#	define	 SRP_DPW		(1 << 14)
+#	define	 SRP_DATA		(1 << 13)
+#	define	 SRP_VBUS		(1 << 12)
+#	define	 OTG_PADEN		(1 << 10)
+#	define	 HMC_PADEN		(1 << 9)
+#	define	 UHOST_EN		(1 << 8)
+#	define	 HMC_TLLSPEED		(1 << 7)
+#	define	 HMC_TLLATTACH		(1 << 6)
+#	define	 OTG_HMC(w)		(((w)>>0)&0x3f)
+#define OTG_CTRL			(OTG_BASE + 0x0c)
+#	define	 OTG_USB2_EN		(1 << 29)
+#	define	 OTG_USB2_DP		(1 << 28)
+#	define	 OTG_USB2_DM		(1 << 27)
+#	define	 OTG_USB1_EN		(1 << 26)
+#	define	 OTG_USB1_DP		(1 << 25)
+#	define	 OTG_USB1_DM		(1 << 24)
+#	define	 OTG_USB0_EN		(1 << 23)
+#	define	 OTG_USB0_DP		(1 << 22)
+#	define	 OTG_USB0_DM		(1 << 21)
+#	define	 OTG_ASESSVLD		(1 << 20)
+#	define	 OTG_BSESSEND		(1 << 19)
+#	define	 OTG_BSESSVLD		(1 << 18)
+#	define	 OTG_VBUSVLD		(1 << 17)
+#	define	 OTG_ID			(1 << 16)
+#	define	 OTG_DRIVER_SEL		(1 << 15)
+#	define	 OTG_A_SETB_HNPEN	(1 << 12)
+#	define	 OTG_A_BUSREQ		(1 << 11)
+#	define	 OTG_B_HNPEN		(1 << 9)
+#	define	 OTG_B_BUSREQ		(1 << 8)
+#	define	 OTG_BUSDROP		(1 << 7)
+#	define	 OTG_PULLDOWN		(1 << 5)
+#	define	 OTG_PULLUP		(1 << 4)
+#	define	 OTG_DRV_VBUS		(1 << 3)
+#	define	 OTG_PD_VBUS		(1 << 2)
+#	define	 OTG_PU_VBUS		(1 << 1)
+#	define	 OTG_PU_ID		(1 << 0)
+#define OTG_IRQ_EN			(OTG_BASE + 0x10)	/* 16-bit */
+#	define	 DRIVER_SWITCH		(1 << 15)
+#	define	 A_VBUS_ERR		(1 << 13)
+#	define	 A_REQ_TMROUT		(1 << 12)
+#	define	 A_SRP_DETECT		(1 << 11)
+#	define	 B_HNP_FAIL		(1 << 10)
+#	define	 B_SRP_TMROUT		(1 << 9)
+#	define	 B_SRP_DONE		(1 << 8)
+#	define	 B_SRP_STARTED		(1 << 7)
+#	define	 OPRT_CHG		(1 << 0)
+#define OTG_IRQ_SRC			(OTG_BASE + 0x14)	/* 16-bit */
+	// same bits as in IRQ_EN
+#define OTG_OUTCTRL			(OTG_BASE + 0x18)	/* 16-bit */
+#	define	 OTGVPD			(1 << 14)
+#	define	 OTGVPU			(1 << 13)
+#	define	 OTGPUID		(1 << 12)
+#	define	 USB2VDR		(1 << 10)
+#	define	 USB2PDEN		(1 << 9)
+#	define	 USB2PUEN		(1 << 8)
+#	define	 USB1VDR		(1 << 6)
+#	define	 USB1PDEN		(1 << 5)
+#	define	 USB1PUEN		(1 << 4)
+#	define	 USB0VDR		(1 << 2)
+#	define	 USB0PDEN		(1 << 1)
+#	define	 USB0PUEN		(1 << 0)
+#define OTG_TEST			(OTG_BASE + 0x20)	/* 16-bit */
+#define OTG_VENDOR_CODE			(OTG_BASE + 0xfc)	/* 16-bit */
+
+/*-------------------------------------------------------------------------*/
+
+/* OMAP1 */
+#define	USB_TRANSCEIVER_CTRL		(0xfffe1000 + 0x0064)
+#	define	CONF_USB2_UNI_R		(1 << 8)
+#	define	CONF_USB1_UNI_R		(1 << 7)
+#	define	CONF_USB_PORT0_R(x)	(((x)>>4)&0x7)
+#	define	CONF_USB0_ISOLATE_R	(1 << 3)
+#	define	CONF_USB_PWRDN_DM_R	(1 << 2)
+#	define	CONF_USB_PWRDN_DP_R	(1 << 1)
+
+/* OMAP2 */
+#	define	USB_UNIDIR			0x0
+#	define	USB_UNIDIR_TLL			0x1
+#	define	USB_BIDIR			0x2
+#	define	USB_BIDIR_TLL			0x3
+#	define	USBTXWRMODEI(port, x)	((x) << (22 - (port * 2)))
+#	define	USBT2TLL5PI		(1 << 17)
+#	define	USB0PUENACTLOI		(1 << 16)
+#	define	USBSTANDBYCTRL		(1 << 15)
+
+#endif	/* __ASM_ARCH_OMAP_USB_H */
diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h
new file mode 100644
index 0000000..dc104cd
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/plat-omap/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
+
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index ff1413ea..1d7aec1 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -31,7 +31,7 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <asm/io.h>
-#include <asm/arch/mailbox.h>
+#include <mach/mailbox.h>
 #include "mailbox.h"
 
 static struct omap_mbox *mboxes;
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index c7f7406..d084405 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -24,8 +24,8 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/dma.h>
+#include <mach/mcbsp.h>
 
 static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT];
 
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 6f3f459..847df20 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -28,7 +28,7 @@
 #include <asm/system.h>
 #include <asm/io.h>
 #include <linux/spinlock.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c
index 005261a..8bdbf97 100644
--- a/arch/arm/plat-omap/ocpi.c
+++ b/arch/arm/plat-omap/ocpi.c
@@ -33,7 +33,7 @@
 #include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #define OCPI_BASE		0xfffec320
 #define OCPI_FAULT		(OCPI_BASE + 0x00)
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 554ee58..ac67eeb 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -22,10 +22,10 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/arch/sram.h>
-#include <asm/arch/board.h>
+#include <mach/sram.h>
+#include <mach/board.h>
 
-#include <asm/arch/control.h>
+#include <mach/control.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/prm.h"
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index 359912f..777485e 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -31,12 +31,12 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
 
 #ifdef CONFIG_ARCH_OMAP1
 
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 93c4ef9..544d6b32 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -16,7 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Number of timer ticks per jiffy.
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index 373d043..54d4b8e 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -40,12 +40,12 @@
 #include <linux/mutex.h>
 #include <linux/delay.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index a608aa3..1863a1b 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -31,12 +31,12 @@
 #include <asm/mach/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
 
 #include <asm/plat-s3c/nand.h>
 
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 05a1d9c..6d60f04 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -30,7 +30,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/delay.h>
@@ -39,9 +39,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/system-reset.h>
+#include <mach/system-reset.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 5c6f446..d6fb765 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -23,8 +23,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/fb.h>
-#include <asm/arch/hardware.h>
+#include <mach/fb.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 8ae5719..08c2aaf 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -29,12 +29,12 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 
 #include <asm/mach/dma.h>
-#include <asm/arch/map.h>
+#include <mach/map.h>
 
 #include <asm/plat-s3c24xx/dma.h>
 
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index ace8bec..dd27334 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -27,11 +27,11 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
 {
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 6dd5211..849f846 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -19,10 +19,10 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 struct s3c24xx_gpio_chip {
 	struct gpio_chip	chip;
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index f524d76..36cefe1 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -56,14 +56,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index 9919419..e670501 100644
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -24,12 +24,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/map.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
 
 #include <asm/mach-types.h>
 
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 0d044bc..fc4b731a 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -37,14 +37,14 @@
 #include <linux/serial_core.h>
 
 #include <asm/cacheflush.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-irq.h>
 
 #include <asm/mach/time.h>
 
diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c
index 489e32ab..ccfdc9d 100644
--- a/arch/arm/plat-s3c24xx/pwm-clock.c
+++ b/arch/arm/plat-s3c24xx/pwm-clock.c
@@ -18,11 +18,11 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
index a811e8b..8a5fffd 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -34,12 +34,12 @@
 #include <linux/mutex.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/atomic.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c
index 2eefe16..f3dc38c 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-irq.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c
@@ -25,14 +25,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index eb9dd4f..281b480 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -25,15 +25,15 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-dsc.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index 4f8756e..4981a08b 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -26,12 +26,12 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-mem.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-mem.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c24xx/time.c
index 766473b..b471a21 100644
--- a/arch/arm/plat-s3c24xx/time.c
+++ b/arch/arm/plat-s3c24xx/time.c
@@ -32,9 +32,9 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/arch/map.h>
+#include <mach/map.h>
 #include <asm/plat-s3c/regs-timer.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-irq.h>
 #include <asm/mach/time.h>
 
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/drivers/char/ds1620.c b/drivers/char/ds1620.c
index be85c6d..74e9cd8 100644
--- a/drivers/char/ds1620.c
+++ b/drivers/char/ds1620.c
@@ -10,7 +10,7 @@
 #include <linux/init.h>
 #include <linux/smp_lock.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/uaccess.h>
 #include <asm/therm.h>
diff --git a/drivers/char/hw_random/ixp4xx-rng.c b/drivers/char/hw_random/ixp4xx-rng.c
index b4402b5..263567f 100644
--- a/drivers/char/hw_random/ixp4xx-rng.c
+++ b/drivers/char/hw_random/ixp4xx-rng.c
@@ -23,7 +23,7 @@
 #include <linux/hw_random.h>
 
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 
 static int ixp4xx_rng_data_read(struct hwrng *rng, u32 *buffer)
diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index 42a107f..2d637e0 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -27,8 +27,8 @@
 #include <crypto/authenc.h>
 #include <crypto/scatterwalk.h>
 
-#include <asm/arch/npe.h>
-#include <asm/arch/qmgr.h>
+#include <mach/npe.h>
+#include <mach/qmgr.h>
 
 #define MAX_KEYLEN 32
 
diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index 85bfeba..71fba82 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -33,7 +33,7 @@
 #include <linux/memory.h>
 #include <linux/ioport.h>
 
-#include <asm/arch/adma.h>
+#include <mach/adma.h>
 
 #define to_iop_adma_chan(chan) container_of(chan, struct iop_adma_chan, common)
 #define to_iop_adma_device(dev) \
diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c
index 5ec60d1..75089fe 100644
--- a/drivers/i2c/busses/i2c-acorn.c
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -16,7 +16,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/hardware/ioc.h>
 #include <asm/system.h>
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 73d6194..c1adcdb 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -27,9 +27,9 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/at91_twi.h>
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
+#include <mach/at91_twi.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
 
 #define TWI_CLOCK		100000		/* Hz. max 400 Kbits/sec */
 
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index eccbb74..5d77898 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -36,9 +36,9 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/i2c.h>
+#include <mach/i2c.h>
 
 /* ----- global defines ----------------------------------------------- */
 
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index bd0f3f4..05d72e9 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -33,8 +33,8 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 
-#include <asm/arch/hardware.h>	/* Pick up IXP2000-specific bits */
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h>	/* Pick up IXP2000-specific bits */
+#include <mach/gpio.h>
 
 static inline int ixp2000_scl_pin(void *data)
 {
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index e06ccc6..ec15cff 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -19,7 +19,7 @@
 #include <linux/completion.h>
 #include <linux/platform_device.h>
 #include <linux/i2c-pnx.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index d65b7fb..44d8384 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -34,11 +34,11 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/i2c.h>
+#include <mach/pxa-regs.h>
 
 struct pxa_i2c {
 	spinlock_t		lock;
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index b216bfb..c772e02 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -35,11 +35,11 @@
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-iic.h>
 #include <asm/plat-s3c/iic.h>
 
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index 03a33f1..18355ae 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -33,7 +33,7 @@
 #include <linux/workqueue.h>
 
 #include <asm/irq.h>
-#include <asm/arch/usb.h>
+#include <mach/usb.h>
 
 
 #ifndef	DEBUG
@@ -94,7 +94,7 @@
 /* board-specific PM hooks */
 
 #include <asm/gpio.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 #include <asm/mach-types.h>
 
 
diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c
index e3c12e3..176126d 100644
--- a/drivers/i2c/chips/menelaus.c
+++ b/drivers/i2c/chips/menelaus.c
@@ -43,8 +43,8 @@
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/menelaus.h>
+#include <mach/gpio.h>
+#include <mach/menelaus.h>
 
 #define DRIVER_NAME			"menelaus"
 
diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c
index 8a3bb23..f728f29 100644
--- a/drivers/ide/arm/ide_arm.c
+++ b/drivers/ide/arm/ide_arm.c
@@ -16,7 +16,7 @@
 #define DRV_NAME "ide_arm"
 
 #ifdef CONFIG_ARCH_CLPS7500
-# include <asm/arch/hardware.h>
+# include <mach/hardware.h>
 #
 # define IDE_ARM_IO	(ISASLOT_IO + 0x1f0)
 # define IDE_ARM_IRQ	IRQ_ISA_14
diff --git a/drivers/input/keyboard/aaed2000_kbd.c b/drivers/input/keyboard/aaed2000_kbd.c
index 8a77bfc..18222a6 100644
--- a/drivers/input/keyboard/aaed2000_kbd.c
+++ b/drivers/input/keyboard/aaed2000_kbd.c
@@ -20,8 +20,8 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/aaed2000.h>
+#include <mach/hardware.h>
+#include <mach/aaed2000.h>
 
 #define KB_ROWS			12
 #define KB_COLS			8
diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c
index 1aa46ae..134e67b 100644
--- a/drivers/input/keyboard/corgikbd.c
+++ b/drivers/input/keyboard/corgikbd.c
@@ -20,10 +20,10 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 
-#include <asm/arch/corgi.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/corgi.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
 #include <asm/hardware/scoop.h>
 
 #define KB_ROWS				8
diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c
index 63774b5..4e016d8 100644
--- a/drivers/input/keyboard/jornada720_kbd.c
+++ b/drivers/input/keyboard/jornada720_kbd.c
@@ -24,8 +24,8 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/jornada720.h>
-#include <asm/arch/hardware.h>
+#include <mach/jornada720.h>
+#include <mach/hardware.h>
 
 MODULE_AUTHOR("Kristoffer Ericson <Kristoffer.Ericson@gmail.com>");
 MODULE_DESCRIPTION("HP Jornada 710/720/728 keyboard driver");
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index b7964850..dcea87a 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -34,13 +34,13 @@
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
 #include <linux/errno.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/menelaus.h>
+#include <mach/gpio.h>
+#include <mach/keypad.h>
+#include <mach/menelaus.h>
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 #undef NEW_BOARD_LEARNING_MODE
 
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 8a92535..6d30c6d 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -29,8 +29,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa27x_keypad.h>
+#include <mach/hardware.h>
+#include <mach/pxa27x_keypad.h>
 
 /*
  * Keypad Controller registers
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index 1aa3718..de67b8e 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -20,10 +20,10 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 
-#include <asm/arch/spitz.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/spitz.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
 
 #define KB_ROWS			7
 #define KB_COLS			11
diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c
index b12b7ee..44cb50a 100644
--- a/drivers/input/keyboard/tosakbd.c
+++ b/drivers/input/keyboard/tosakbd.c
@@ -19,8 +19,8 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/tosa.h>
+#include <mach/gpio.h>
+#include <mach/tosa.h>
 
 #define KB_ROWMASK(r)		(1 << (r))
 #define SCANCODE(r, c)		(((r)<<4) + (c) + 1)
diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c
index 7908f5c..9946d73 100644
--- a/drivers/input/misc/ixp4xx-beeper.c
+++ b/drivers/input/misc/ixp4xx-beeper.c
@@ -20,7 +20,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
 MODULE_DESCRIPTION("ixp4xx beeper driver");
diff --git a/drivers/input/mouse/rpcmouse.c b/drivers/input/mouse/rpcmouse.c
index 536e3be..56c079e 100644
--- a/drivers/input/mouse/rpcmouse.c
+++ b/drivers/input/mouse/rpcmouse.c
@@ -23,7 +23,7 @@
 #include <linux/init.h>
 #include <linux/input.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/hardware/iomd.h>
diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c
index 22374d0..7f36edd3 100644
--- a/drivers/input/serio/rpckbd.c
+++ b/drivers/input/serio/rpckbd.c
@@ -35,7 +35,7 @@
 #include <linux/platform_device.h>
 
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/hardware/iomd.h>
 #include <asm/system.h>
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c
index d0e13fc..65202c9 100644
--- a/drivers/input/touchscreen/corgi_ts.c
+++ b/drivers/input/touchscreen/corgi_ts.c
@@ -19,10 +19,10 @@
 #include <linux/slab.h>
 #include <linux/irq.h>
 
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
 
 
 #define PWR_MODE_ACTIVE		0
diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c
index 4f86081..4d3139e 100644
--- a/drivers/input/touchscreen/h3600_ts_input.c
+++ b/drivers/input/touchscreen/h3600_ts_input.c
@@ -39,8 +39,8 @@
 #include <linux/delay.h>
 
 /* SA1100 serial defines */
-#include <asm/arch/hardware.h>
-#include <asm/arch/irqs.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
 
 #define DRIVER_DESC	"H3600 touchscreen driver"
 
diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c
index 19f4077..bf44f9d 100644
--- a/drivers/input/touchscreen/jornada720_ts.c
+++ b/drivers/input/touchscreen/jornada720_ts.c
@@ -19,8 +19,8 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/jornada720.h>
+#include <mach/hardware.h>
+#include <mach/jornada720.h>
 
 MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
 MODULE_DESCRIPTION("HP Jornada 710/720/728 touchscreen driver");
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index 590a137..283f93a 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -33,7 +33,7 @@
 #include <linux/interrupt.h>
 #include <linux/wm97xx.h>
 #include <linux/io.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 #define VERSION		"0.13"
 
diff --git a/drivers/leds/leds-ams-delta.c b/drivers/leds/leds-ams-delta.c
index c37bb0d..32c98b2 100644
--- a/drivers/leds/leds-ams-delta.c
+++ b/drivers/leds/leds-ams-delta.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
-#include <asm/arch/board-ams-delta.h>
+#include <mach/board-ams-delta.h>
 
 /*
  * Our context
diff --git a/drivers/leds/leds-cm-x270.c b/drivers/leds/leds-cm-x270.c
index accc7ed..836a43d 100644
--- a/drivers/leds/leds-cm-x270.c
+++ b/drivers/leds/leds-cm-x270.c
@@ -18,8 +18,8 @@
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
 
 #define GPIO_RED_LED			(93)
 #define GPIO_GREEN_LED			(94)
diff --git a/drivers/leds/leds-corgi.c b/drivers/leds/leds-corgi.c
index e9d419f..bc2dcd8 100644
--- a/drivers/leds/leds-corgi.c
+++ b/drivers/leds/leds-corgi.c
@@ -15,9 +15,9 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/corgi.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
 #include <asm/hardware/scoop.h>
 
 static void corgiled_amber_set(struct led_classdev *led_cdev,
diff --git a/drivers/leds/leds-fsg.c b/drivers/leds/leds-fsg.c
index a7421b8..be0e121 100644
--- a/drivers/leds/leds-fsg.c
+++ b/drivers/leds/leds-fsg.c
@@ -19,7 +19,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 static short __iomem *latch_address;
diff --git a/drivers/leds/leds-h1940.c b/drivers/leds/leds-h1940.c
index 5227585..11b77a7 100644
--- a/drivers/leds/leds-h1940.c
+++ b/drivers/leds/leds-h1940.c
@@ -16,9 +16,9 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/h1940-latch.h>
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+#include <mach/h1940-latch.h>
 
 /*
  * Green led.
diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c
index 17ebfe2..5d91362 100644
--- a/drivers/leds/leds-locomo.c
+++ b/drivers/leds/leds-locomo.c
@@ -13,7 +13,7 @@
 #include <linux/device.h>
 #include <linux/leds.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/locomo.h>
 
 static void locomoled_brightness_set(struct led_classdev *led_cdev,
diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
index cb74c18..25a07f2 100644
--- a/drivers/leds/leds-s3c24xx.c
+++ b/drivers/leds/leds-s3c24xx.c
@@ -16,9 +16,9 @@
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
 
 /* our context */
 
diff --git a/drivers/leds/leds-spitz.c b/drivers/leds/leds-spitz.c
index e75e854..178831c 100644
--- a/drivers/leds/leds-spitz.c
+++ b/drivers/leds/leds-spitz.c
@@ -17,9 +17,9 @@
 #include <linux/leds.h>
 #include <asm/hardware/scoop.h>
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/spitz.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/spitz.h>
 
 static void spitzled_amber_set(struct led_classdev *led_cdev,
 			       enum led_brightness value)
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index b15f82c..5e7ebca 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -36,8 +36,8 @@
 #include <linux/videodev2.h>
 
 #include <asm/dma.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/camera.h>
+#include <mach/pxa-regs.h>
+#include <mach/camera.h>
 
 #define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5)
 #define PXA_CAM_DRV_NAME "pxa27x-camera"
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index 6a2a2a8c..28380b2 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -21,12 +21,12 @@
 #include <linux/platform_device.h>
 
 #include <asm/dma.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
-#include <asm/arch/mcp.h>
+#include <mach/mcp.h>
 
-#include <asm/arch/assabet.h>
+#include <mach/assabet.h>
 
 #include "mcp.h"
 
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index a675411..a316f1b 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -26,7 +26,7 @@
 #include <linux/mutex.h>
 
 #include <asm/dma.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include "ucb1x00.h"
 
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index ad34e2d..44762ca 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -32,7 +32,7 @@
 #include <linux/kthread.h>
 
 #include <asm/dma.h>
-#include <asm/arch/collie.h>
+#include <mach/collie.h>
 #include <asm/mach-types.h>
 
 #include "ucb1x00.h"
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index f15e206..6915f40a 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -73,9 +73,9 @@
 #include <asm/gpio.h>
 
 #include <asm/mach/mmc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91_mci.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
+#include <mach/at91_mci.h>
 
 #define DRIVER_NAME "at91_mci"
 
diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index f61406d..2f0fcdb 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -42,8 +42,8 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/imx-dma.h>
+#include <mach/mmc.h>
+#include <mach/imx-dma.h>
 
 #include "imxmmc.h"
 
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 1f587a23..c160288 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -30,12 +30,12 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
+#include <mach/board.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
+#include <mach/dma.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
 
 #define	OMAP_MMC_REG_CMD	0x00
 #define	OMAP_MMC_REG_ARGL	0x04
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index a8e18fe..55093ad 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -31,8 +31,8 @@
 #include <asm/io.h>
 #include <asm/sizes.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mmc.h>
+#include <mach/pxa-regs.h>
+#include <mach/mmc.h>
 
 #include "pxamci.h"
 
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index be550c2..7c994e1 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -18,8 +18,8 @@
 
 #include <asm/dma.h>
 
-#include <asm/arch/regs-sdi.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-sdi.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/mci.h>
 
diff --git a/drivers/mtd/maps/autcpu12-nvram.c b/drivers/mtd/maps/autcpu12-nvram.c
index f199b16..5366418 100644
--- a/drivers/mtd/maps/autcpu12-nvram.c
+++ b/drivers/mtd/maps/autcpu12-nvram.c
@@ -25,8 +25,8 @@
 #include <linux/init.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/autcpu12.h>
+#include <mach/hardware.h>
+#include <mach/autcpu12.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c
index cb507da0..e5059aa 100644
--- a/drivers/mtd/maps/cdb89712.c
+++ b/drivers/mtd/maps/cdb89712.c
@@ -9,7 +9,7 @@
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c
index 468204c..60e68bd 100644
--- a/drivers/mtd/maps/ceiva.c
+++ b/drivers/mtd/maps/ceiva.c
@@ -25,7 +25,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/concat.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c
index 873ff15..35fef65 100644
--- a/drivers/mtd/maps/h720x-flash.c
+++ b/drivers/mtd/maps/h720x-flash.c
@@ -16,7 +16,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 static struct mtd_info *mymtd;
diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c
index d0282ce..7100ee3 100644
--- a/drivers/mtd/maps/integrator-flash.c
+++ b/drivers/mtd/maps/integrator-flash.c
@@ -37,7 +37,7 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/mach/flash.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/system.h>
 
diff --git a/drivers/mtd/maps/ipaq-flash.c b/drivers/mtd/maps/ipaq-flash.c
index 6447e8b..ed58f6a 100644
--- a/drivers/mtd/maps/ipaq-flash.c
+++ b/drivers/mtd/maps/ipaq-flash.c
@@ -24,8 +24,8 @@
 #include <linux/mtd/concat.h>
 #endif
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/h3600.h>
+#include <mach/hardware.h>
+#include <mach/h3600.h>
 #include <asm/io.h>
 
 
diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c
index 33b583e..dcdb1f1 100644
--- a/drivers/mtd/maps/ixp2000.c
+++ b/drivers/mtd/maps/ixp2000.c
@@ -30,7 +30,7 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/flash.h>
 
 #include <linux/reboot.h>
diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c
index 771e680..05f276a 100644
--- a/drivers/mtd/maps/omap_nor.c
+++ b/drivers/mtd/maps/omap_nor.c
@@ -43,9 +43,9 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/tc.h>
+#include <mach/tc.h>
 
 #ifdef CONFIG_MTD_PARTITIONS
 static const char *part_probes[] = { /* "RedBoot", */ "cmdlinepart", NULL };
diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c
index fe070cc..771139c 100644
--- a/drivers/mtd/maps/pxa2xx-flash.c
+++ b/drivers/mtd/maps/pxa2xx-flash.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/cacheflush.h>
 
 #include <asm/mach/flash.h>
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index 7fc3204..7df6bbf 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -18,7 +18,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/concat.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
 #include <asm/mach/flash.h>
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index a0ba07c..26d4298 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -22,10 +22,10 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/sizes.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/board-ams-delta.h>
+#include <mach/gpio.h>
+#include <mach/board-ams-delta.h>
 
 /*
  * MTD structure for E3 (Delta)
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 99aec46..3387e0d 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -32,8 +32,8 @@
 #include <linux/gpio.h>
 #include <linux/io.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
 
 #ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW
 #define hard_ecc	1
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index 553dd7e..7c95da1 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -32,9 +32,9 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/sizes.h>
-#include <asm/arch/autcpu12.h>
+#include <mach/autcpu12.h>
 
 /*
  * MTD structure for AUTCPU12 board
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index fc8529be..9eba3f0 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -26,8 +26,8 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
 
 #define GPIO_NAND_CS	(11)
 #define GPIO_NAND_RB	(89)
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
index 387e435..86366bf 100644
--- a/drivers/mtd/nand/edb7312.c
+++ b/drivers/mtd/nand/edb7312.c
@@ -23,7 +23,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>	/* for CLPS7111_VIRT_BASE */
+#include <mach/hardware.h>	/* for CLPS7111_VIRT_BASE */
 #include <asm/sizes.h>
 #include <asm/hardware/clps7111.h>
 
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c
index 9e59de5..f8ce79b 100644
--- a/drivers/mtd/nand/h1910.c
+++ b/drivers/mtd/nand/h1910.c
@@ -24,10 +24,10 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>	/* for CLPS7111_VIRT_BASE */
+#include <mach/hardware.h>	/* for CLPS7111_VIRT_BASE */
 #include <asm/sizes.h>
-#include <asm/arch/h1900-gpio.h>
-#include <asm/arch/ipaq.h>
+#include <mach/h1900-gpio.h>
+#include <mach/ipaq.h>
 
 /*
  * MTD structure for EDB7312 board
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index ee2ac39..64002488 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -18,7 +18,7 @@
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/plat-orion/orion_nand.h>
 
 #ifdef CONFIG_MTD_CMDLINE_PARTS
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index fe2bc7e..a64ad15 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -22,8 +22,8 @@
 #include <linux/irq.h>
 #include <asm/dma.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa3xx_nand.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa3xx_nand.h>
 
 #define	CHIP_DELAY_TIMEOUT	(2 * HZ/10)
 
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 18d2cd3..30a518e2 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -21,7 +21,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/interrupt.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 static void __iomem *sharpsl_io_base;
diff --git a/drivers/mtd/nand/ts7250.c b/drivers/mtd/nand/ts7250.c
index 807a727..2c410a0 100644
--- a/drivers/mtd/nand/ts7250.c
+++ b/drivers/mtd/nand/ts7250.c
@@ -25,7 +25,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/sizes.h>
 #include <asm/mach-types.h>
 
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index 0ece4f9..aa4a524 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -28,7 +28,7 @@
 #include <linux/bitops.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/system.h>
 
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index ffae266..0fa5346 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -32,9 +32,9 @@
 #include <asm/uaccess.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/at91rm9200_emac.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/board.h>
+#include <mach/at91rm9200_emac.h>
+#include <mach/gpio.h>
+#include <mach/board.h>
 
 #include "at91_ether.h"
 
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index 18d3eeb..1267444 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -20,8 +20,8 @@
 #include <linux/moduleparam.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
-#include <asm/arch/ep93xx-regs.h>
-#include <asm/arch/platform.h>
+#include <mach/ep93xx-regs.h>
+#include <mach/platform.h>
 #include <asm/io.h>
 
 #define DRV_MODULE_NAME		"ep93xx-eth"
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index 9b777d9..020771b 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -32,8 +32,8 @@
 #include <linux/kernel.h>
 #include <linux/mii.h>
 #include <linux/platform_device.h>
-#include <asm/arch/npe.h>
-#include <asm/arch/qmgr.h>
+#include <mach/npe.h>
+#include <mach/qmgr.h>
 
 #define DEBUG_QUEUES		0
 #define DEBUG_DESC		0
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index fba87ab..ea6144a 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -189,7 +189,7 @@
 static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
 #elif defined(CONFIG_ARCH_PNX010X)
 #include <asm/irq.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 #define CIRRUS_DEFAULT_BASE	IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000)	/* = Physical address 0x48200000 */
 #define CIRRUS_DEFAULT_IRQ	VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
 static unsigned int netcard_portlist[] __used __initdata = {CIRRUS_DEFAULT_BASE, 0};
diff --git a/drivers/net/irda/ep7211-sir.c b/drivers/net/irda/ep7211-sir.c
index 2f89d47..f83c5b8 100644
--- a/drivers/net/irda/ep7211-sir.c
+++ b/drivers/net/irda/ep7211-sir.c
@@ -14,7 +14,7 @@
 #include <net/irda/irda_device.h>
 
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include "sir-dev.h"
 
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index f76b0b6c..4aa61a1 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -23,8 +23,8 @@
 #include <net/irda/irda_device.h>
 
 #include <asm/dma.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/irda.h>
+#include <mach/pxa-regs.h>
 
 #define IrSR_RXPL_NEG_IS_ZERO (1<<4)
 #define IrSR_RXPL_POS_IS_ZERO 0x0
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index d16594a..a951889 100644
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -37,7 +37,7 @@
 
 #include <asm/irq.h>
 #include <asm/dma.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/irda.h>
 
 static int power_level = 3;
diff --git a/drivers/net/ixp2000/ixp2400-msf.c b/drivers/net/ixp2000/ixp2400-msf.c
index 65267c9..f5ffd7e 100644
--- a/drivers/net/ixp2000/ixp2400-msf.c
+++ b/drivers/net/ixp2000/ixp2400-msf.c
@@ -13,8 +13,8 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/ixp2000-regs.h>
+#include <mach/hardware.h>
+#include <mach/ixp2000-regs.h>
 #include <asm/delay.h>
 #include <asm/io.h>
 #include "ixp2400-msf.h"
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index daba82b..84c77f1 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -21,8 +21,8 @@
 #include <linux/platform_device.h>
 #include <linux/phy.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
 
 #include "macb.h"
 
diff --git a/drivers/net/netx-eth.c b/drivers/net/netx-eth.c
index f2655ce..3f9af75 100644
--- a/drivers/net/netx-eth.c
+++ b/drivers/net/netx-eth.c
@@ -29,11 +29,11 @@
 #include <linux/mii.h>
 
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/pfifo.h>
-#include <asm/arch/xc.h>
-#include <asm/arch/eth.h>
+#include <mach/hardware.h>
+#include <mach/netx-regs.h>
+#include <mach/pfifo.h>
+#include <mach/xc.h>
+#include <mach/eth.h>
 
 /* XC Fifo Offsets */
 #define EMPTY_PTR_FIFO(xcno)    (0 + ((xcno) << 3))	/* Index of the empty pointer FIFO */
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index 76c17c2..2abfc28 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -222,7 +222,7 @@
  */
 #include <linux/dma-mapping.h>
 #include <asm/dma.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 static dma_addr_t rx_dmabuf, tx_dmabuf;
 static int rx_dmalen, tx_dmalen;
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 22209b6..997e7f1 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -187,7 +187,7 @@
 
 #elif defined(CONFIG_SA1100_ASSABET)
 
-#include <asm/arch/neponset.h>
+#include <mach/neponset.h>
 
 /* We can only do 8-bit reads and writes in the static memory space. */
 #define SMC_CAN_USE_8BIT	1
@@ -339,7 +339,7 @@
  * IOBARRIER on entry to their ISR.
  */
 
-#include <asm/arch/constants.h>	/* IOBARRIER_VIRT */
+#include <mach/constants.h>	/* IOBARRIER_VIRT */
 
 #define SMC_CAN_USE_8BIT	0
 #define SMC_CAN_USE_16BIT	1
@@ -525,7 +525,7 @@
  */
 #include <linux/dma-mapping.h>
 #include <asm/dma.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 #ifdef SMC_insl
 #undef SMC_insl
diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
index ab6b4be..a0ffb8e 100644
--- a/drivers/pcmcia/at91_cf.c
+++ b/drivers/pcmcia/at91_cf.c
@@ -18,13 +18,13 @@
 
 #include <pcmcia/ss.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
 #include <asm/gpio.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/at91rm9200_mc.h>
 
 
 /*
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index 36cf9bc..f3736398 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -19,12 +19,12 @@
 
 #include <pcmcia/ss.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
 
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
 
 
 /* NOTE:  don't expect this to support many I/O cards.  The 16xx chips have
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index ff5e3f3..1b07af5 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -24,12 +24,12 @@
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 #include <pcmcia/cs_types.h>
 #include <pcmcia/ss.h>
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
index bb95db7..bcff5cf 100644
--- a/drivers/pcmcia/pxa2xx_cm_x270.c
+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
@@ -16,7 +16,7 @@
 #include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 #include "soc_common.h"
 
diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c
index 64f709d..37ec55d 100644
--- a/drivers/pcmcia/pxa2xx_lubbock.c
+++ b/drivers/pcmcia/pxa2xx_lubbock.c
@@ -21,11 +21,11 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/mach-types.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/lubbock.h>
+#include <mach/pxa-regs.h>
+#include <mach/lubbock.h>
 
 #include "sa1111_generic.h"
 
diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c
index b0dcda4..877001db 100644
--- a/drivers/pcmcia/pxa2xx_mainstone.c
+++ b/drivers/pcmcia/pxa2xx_mainstone.c
@@ -21,12 +21,12 @@
 
 #include <pcmcia/ss.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mainstone.h>
+#include <mach/pxa-regs.h>
+#include <mach/mainstone.h>
 
 #include "soc_common.h"
 
diff --git a/drivers/pcmcia/pxa2xx_palmtx.c b/drivers/pcmcia/pxa2xx_palmtx.c
index 4abde19..a8771ff 100644
--- a/drivers/pcmcia/pxa2xx_palmtx.c
+++ b/drivers/pcmcia/pxa2xx_palmtx.c
@@ -16,8 +16,8 @@
 
 #include <asm/mach-types.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/palmtx.h>
+#include <mach/gpio.h>
+#include <mach/palmtx.h>
 
 #include "soc_common.h"
 
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index 58395bf..1cd02f5 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -19,7 +19,7 @@
 #include <linux/platform_device.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/hardware/scoop.h>
 
diff --git a/drivers/pcmcia/sa1100_assabet.c b/drivers/pcmcia/sa1100_assabet.c
index 71fbb62..f424146a 100644
--- a/drivers/pcmcia/sa1100_assabet.c
+++ b/drivers/pcmcia/sa1100_assabet.c
@@ -11,11 +11,11 @@
 #include <linux/device.h>
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/signal.h>
-#include <asm/arch/assabet.h>
+#include <mach/assabet.h>
 
 #include "sa1100_generic.h"
 
diff --git a/drivers/pcmcia/sa1100_badge4.c b/drivers/pcmcia/sa1100_badge4.c
index a34279a..1ca9737 100644
--- a/drivers/pcmcia/sa1100_badge4.c
+++ b/drivers/pcmcia/sa1100_badge4.c
@@ -18,9 +18,9 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/arch/badge4.h>
+#include <mach/badge4.h>
 #include <asm/hardware/sa1111.h>
 
 #include "sa1111_generic.h"
diff --git a/drivers/pcmcia/sa1100_cerf.c b/drivers/pcmcia/sa1100_cerf.c
index bd843bf..63e6bc4 100644
--- a/drivers/pcmcia/sa1100_cerf.c
+++ b/drivers/pcmcia/sa1100_cerf.c
@@ -11,10 +11,10 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
-#include <asm/arch/cerf.h>
+#include <mach/cerf.h>
 #include "sa1100_generic.h"
 
 #define CERF_SOCKET	1
diff --git a/drivers/pcmcia/sa1100_h3600.c b/drivers/pcmcia/sa1100_h3600.c
index 9017b13..6de4e1b 100644
--- a/drivers/pcmcia/sa1100_h3600.c
+++ b/drivers/pcmcia/sa1100_h3600.c
@@ -11,10 +11,10 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/arch/h3600.h>
+#include <mach/h3600.h>
 
 #include "sa1100_generic.h"
 
diff --git a/drivers/pcmcia/sa1100_jornada720.c b/drivers/pcmcia/sa1100_jornada720.c
index 15c31db..57ca085 100644
--- a/drivers/pcmcia/sa1100_jornada720.c
+++ b/drivers/pcmcia/sa1100_jornada720.c
@@ -10,7 +10,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/mach-types.h>
 
diff --git a/drivers/pcmcia/sa1100_neponset.c b/drivers/pcmcia/sa1100_neponset.c
index ace391b..4c41e86 100644
--- a/drivers/pcmcia/sa1100_neponset.c
+++ b/drivers/pcmcia/sa1100_neponset.c
@@ -9,9 +9,9 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/arch/neponset.h>
+#include <mach/neponset.h>
 #include <asm/hardware/sa1111.h>
 
 #include "sa1111_generic.h"
diff --git a/drivers/pcmcia/sa1100_shannon.c b/drivers/pcmcia/sa1100_shannon.c
index 16b0427..46d8c19 100644
--- a/drivers/pcmcia/sa1100_shannon.c
+++ b/drivers/pcmcia/sa1100_shannon.c
@@ -9,9 +9,9 @@
 #include <linux/device.h>
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/arch/shannon.h>
+#include <mach/shannon.h>
 #include <asm/irq.h>
 #include "sa1100_generic.h"
 
diff --git a/drivers/pcmcia/sa1100_simpad.c b/drivers/pcmcia/sa1100_simpad.c
index 6e6e986..33a08ae 100644
--- a/drivers/pcmcia/sa1100_simpad.c
+++ b/drivers/pcmcia/sa1100_simpad.c
@@ -9,10 +9,10 @@
 #include <linux/device.h>
 #include <linux/init.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
-#include <asm/arch/simpad.h>
+#include <mach/simpad.h>
 #include "sa1100_generic.h"
  
 extern long get_cs3_shadow(void);
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index 432c061..6924d0e 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -14,7 +14,7 @@
 
 #include <pcmcia/ss.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c
index 7d48201a..7cb12732 100644
--- a/drivers/pcmcia/sa11xx_base.c
+++ b/drivers/pcmcia/sa11xx_base.c
@@ -37,7 +37,7 @@
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index 95dff38..c48f3f6 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -43,7 +43,7 @@
 #include <linux/spinlock.h>
 #include <linux/cpufreq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/system.h>
 
@@ -51,7 +51,7 @@
 
 /* FIXME: platform dependent resource declaration has to move out of this file */
 #ifdef CONFIG_ARCH_PXA
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 #endif
 
 #ifdef DEBUG
diff --git a/drivers/power/palmtx_battery.c b/drivers/power/palmtx_battery.c
index 244bb27..7035bfa 100644
--- a/drivers/power/palmtx_battery.c
+++ b/drivers/power/palmtx_battery.c
@@ -22,7 +22,7 @@
 #include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/palmtx.h>
+#include <mach/palmtx.h>
 
 static DEFINE_MUTEX(bat_lock);
 static struct work_struct bat_work;
diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c
index bf664fb..2eab35a 100644
--- a/drivers/power/tosa_battery.c
+++ b/drivers/power/tosa_battery.c
@@ -19,7 +19,7 @@
 #include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/tosa.h>
+#include <mach/tosa.h>
 
 static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
 static struct work_struct bat_work;
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index cd32d05..4e888cc 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -29,7 +29,7 @@
 #include <linux/completion.h>
 
 #include <asm/uaccess.h>
-#include <asm/arch/at91_rtc.h>
+#include <mach/at91_rtc.h>
 
 
 #define AT91_RTC_FREQ		1
diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index f0246ef..2133f37 100644
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -19,8 +19,8 @@
 #include <linux/interrupt.h>
 #include <linux/ioctl.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/at91_rtt.h>
+#include <mach/board.h>
+#include <mach/at91_rtt.h>
 
 
 /*
diff --git a/drivers/rtc/rtc-ep93xx.c b/drivers/rtc/rtc-ep93xx.c
index 9ab53ec..36e4ac0 100644
--- a/drivers/rtc/rtc-ep93xx.c
+++ b/drivers/rtc/rtc-ep93xx.c
@@ -12,7 +12,7 @@
 #include <linux/module.h>
 #include <linux/rtc.h>
 #include <linux/platform_device.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #define EP93XX_RTC_REG(x)	(EP93XX_RTC_BASE + (x))
 #define EP93XX_RTC_DATA		EP93XX_RTC_REG(0x0000)
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 8054112..e7d19b6 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -22,7 +22,7 @@
 #include <linux/clk.h>
 #include <linux/log2.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index a0982d6..66a9bb8 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -31,11 +31,11 @@
 #include <linux/pm.h>
 #include <linux/bitops.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #ifdef CONFIG_ARCH_PXA
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 #endif
 
 #define TIMER_FREQ		CLOCK_TICK_RATE
diff --git a/drivers/scsi/arm/acornscsi-io.S b/drivers/scsi/arm/acornscsi-io.S
index 075df199..22171b2 100644
--- a/drivers/scsi/arm/acornscsi-io.S
+++ b/drivers/scsi/arm/acornscsi-io.S
@@ -8,7 +8,7 @@
 #include <linux/linkage.h>
 
 #include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #if defined(__APCS_32__)
 #define LOADREGS(t,r,l...)	ldm##t	r, l
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 73d7773..f31c669 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -19,7 +19,7 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/dec21285.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #define BAUD_BASE		(mem_fclk_21285/64)
 
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 1fee12c..3a6da80 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -42,11 +42,11 @@
 #include <asm/io.h>
 
 #include <asm/mach/serial_at91.h>
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 #ifdef CONFIG_ARM
-#include <asm/arch/cpu.h>
-#include <asm/arch/gpio.h>
+#include <mach/cpu.h>
+#include <mach/gpio.h>
 #endif
 
 #define PDC_BUFFER_SIZE		512
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 44d5d26..459f342 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -39,7 +39,7 @@
 #include <linux/serial_core.h>
 #include <linux/serial.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/hardware/clps7111.h>
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index db3a2df5..6a29f93 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -44,8 +44,8 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
 
 /* Register definitions */
 #define URXD0 0x0  /* Receiver Register */
diff --git a/drivers/serial/netx-serial.c b/drivers/serial/netx-serial.c
index edbb85a..3f48932 100644
--- a/drivers/serial/netx-serial.c
+++ b/drivers/serial/netx-serial.c
@@ -35,8 +35,8 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/hardware.h>
+#include <mach/netx-regs.h>
 
 /* We've been assigned a range on the "Low-density serial ports" major */
 #define SERIAL_NX_MAJOR	204
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 033767b..f7a0d37 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -45,9 +45,9 @@
 #include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 
 struct uart_pxa_port {
diff --git a/drivers/serial/s3c2400.c b/drivers/serial/s3c2400.c
index 525130d..c8b4266 100644
--- a/drivers/serial/s3c2400.c
+++ b/drivers/serial/s3c2400.c
@@ -17,10 +17,10 @@
 
 #include <asm/irq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 #include "samsung.h"
 
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index f9630c6..40a2531 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -19,10 +19,10 @@
 #include <linux/serial.h>
 
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 #include "samsung.h"
 
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index b4c0bb5..d017031 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -19,10 +19,10 @@
 #include <linux/serial.h>
 
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 #include "samsung.h"
 
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c
index ea34faa..d4a2b17 100644
--- a/drivers/serial/s3c2440.c
+++ b/drivers/serial/s3c2440.c
@@ -19,10 +19,10 @@
 #include <linux/serial.h>
 
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 #include "samsung.h"
 
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index 6c37a58..b24a25e 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -39,7 +39,7 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/serial_sa1100.h>
 
 /* We've been assigned a range on the "Low-density serial ports" major */
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 5b964d4..5a88b3f9 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -45,10 +45,10 @@
 
 #include <asm/irq.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 #include "samsung.h"
 
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index 0edbc5dd..b9cbfc8 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -26,8 +26,8 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-uart.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-uart.h>
+#include <mach/regs-irq.h>
 
 #if defined(CONFIG_SERIAL_KS8695_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 95190c6..02f9320 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -20,9 +20,9 @@
 #include <linux/spi/spi.h>
 
 #include <asm/io.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
 
 #include "atmel_spi.h"
 
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index f6f987b..9d2186f 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -35,8 +35,8 @@
 
 #include <linux/spi/spi.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/clock.h>
+#include <mach/dma.h>
+#include <mach/clock.h>
 
 
 #define OMAP2_MCSPI_MAX_FREQ		48000000
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
index e7588e1..5515eb9 100644
--- a/drivers/spi/omap_uwire.c
+++ b/drivers/spi/omap_uwire.c
@@ -47,12 +47,12 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/mux.h>
-#include <asm/arch/omap730.h>	/* OMAP730_IO_CONF registers */
+#include <mach/mux.h>
+#include <mach/omap730.h>	/* OMAP730_IO_CONF registers */
 
 
 /* FIXME address is now a platform device resource,
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 70786f5..34c7c98 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -34,11 +34,11 @@
 #include <asm/delay.h>
 #include <asm/dma.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/regs-ssp.h>
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa2xx_spi.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/regs-ssp.h>
+#include <mach/ssp.h>
+#include <mach/pxa2xx_spi.h>
 
 MODULE_AUTHOR("Stephen Street");
 MODULE_DESCRIPTION("PXA2xx SSP SPI Controller");
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 8d7c902..61ba147 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -35,9 +35,9 @@
 #include <asm/irq.h>
 #include <asm/delay.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/imx-dma.h>
-#include <asm/arch/spi_imx.h>
+#include <mach/hardware.h>
+#include <mach/imx-dma.h>
+#include <mach/spi_imx.h>
 
 /*-------------------------------------------------------------------------*/
 /* SPI Registers offsets from peripheral base address */
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index 89da39f..98abc73 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -25,11 +25,11 @@
 
 #include <asm/io.h>
 #include <asm/dma.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
-#include <asm/arch/spi.h>
+#include <mach/spi.h>
 
 struct s3c24xx_spi {
 	/* bitbang has to be first */
diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c
index d44fd0a..cc1f647 100644
--- a/drivers/spi/spi_s3c24xx_gpio.c
+++ b/drivers/spi/spi_s3c24xx_gpio.c
@@ -21,9 +21,9 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/spi-gpio.h>
-#include <asm/arch/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/spi-gpio.h>
+#include <mach/hardware.h>
 
 struct s3c2410_spigpio {
 	struct spi_bitbang		 bitbang;
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 5b935e9e..a8a1de4 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -40,15 +40,15 @@
 #include <linux/usb/gadget.h>
 
 #include <asm/byteorder.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/gpio.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9261_matrix.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9261_matrix.h>
 
 #include "at91_udc.h"
 
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 07e5a0b..ae30ab1 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -22,7 +22,7 @@
 #include <linux/delay.h>
 
 #include <asm/gpio.h>
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 #include "atmel_usba_udc.h"
 
@@ -334,7 +334,7 @@
 
 #elif defined(CONFIG_ARCH_AT91)
 
-#include <asm/arch/at91_pmc.h>
+#include <mach/at91_pmc.h>
 
 static void toggle_bias(int is_on)
 {
diff --git a/drivers/usb/gadget/lh7a40x_udc.h b/drivers/usb/gadget/lh7a40x_udc.h
index fd43b90..ca86120 100644
--- a/drivers/usb/gadget/lh7a40x_udc.h
+++ b/drivers/usb/gadget/lh7a40x_udc.h
@@ -47,7 +47,7 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/unaligned.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 395bd18..376e80c 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -52,8 +52,8 @@
 #include <asm/unaligned.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/usb.h>
+#include <mach/dma.h>
+#include <mach/usb.h>
 
 #include "omap_udc.h"
 
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 7e6725d..da6e93c 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -61,7 +61,7 @@
  * This driver is PXA25x only.  Grab the right register definitions.
  */
 #ifdef CONFIG_ARCH_PXA
-#include <asm/arch/pxa25x-udc.h>
+#include <mach/pxa25x-udc.h>
 #endif
 
 #include <asm/mach/udc_pxa2xx.h>
diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h
index c8a1321..1d51aa2 100644
--- a/drivers/usb/gadget/pxa25x_udc.h
+++ b/drivers/usb/gadget/pxa25x_udc.h
@@ -139,7 +139,7 @@
 /*-------------------------------------------------------------------------*/
 
 #ifdef CONFIG_ARCH_LUBBOCK
-#include <asm/arch/lubbock.h>
+#include <mach/lubbock.h>
 /* lubbock can also report usb connect/disconnect irqs */
 #endif
 
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 06c81a3..a28513e 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -33,13 +33,13 @@
 #include <linux/irq.h>
 
 #include <asm/byteorder.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include <linux/usb.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
-#include <asm/arch/pxa2xx-regs.h> /* FIXME: for PSSR */
-#include <asm/arch/udc.h>
+#include <mach/pxa2xx-regs.h> /* FIXME: for PSSR */
+#include <mach/udc.h>
 
 #include "pxa27x_udc.h"
 
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 021955a..5388073 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -49,10 +49,10 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/unaligned.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/regs-udc.h>
 #include <asm/plat-s3c24xx/udc.h>
@@ -887,7 +887,7 @@
 	}
 }
 
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-irq.h>
 
 /*
  *	s3c2410_udc_irq - interrupt handler
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 389a8f1..6db7a28 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -15,11 +15,11 @@
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/gpio.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
 
 #ifndef CONFIG_ARCH_AT91
 #error "CONFIG_ARCH_AT91 must be defined."
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index 4d628a9..cb0b506 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -28,7 +28,7 @@
 #include <linux/signal.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 static struct clk *usb_host_clock;
 
diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c
index 020769b..9e31d44 100644
--- a/drivers/usb/host/ohci-lh7a404.c
+++ b/drivers/usb/host/ohci-lh7a404.c
@@ -19,7 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/signal.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 
 extern int usb_disabled(void);
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 9b7e910..94dfca0 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -19,15 +19,15 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/mux.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/usb.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
+#include <mach/fpga.h>
+#include <mach/usb.h>
 
 
 /* OMAP-1510 OHCI has its own MMU for DMA */
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index ff4d928..b02cd07 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -21,12 +21,12 @@
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/platform.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/gpio.h>
+#include <mach/platform.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
 
 #define USB_CTRL	IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
 
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 3eb2c28..8c9c4849 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -24,10 +24,10 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h> /* FIXME: for PSSR */
-#include <asm/arch/ohci.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h> /* FIXME: for PSSR */
+#include <mach/ohci.h>
 
 #define PXA_UHC_MAX_PORTNUM    3
 
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 358100c..9e3dc40 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -22,8 +22,8 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/usb-control.h>
+#include <mach/hardware.h>
+#include <mach/usb-control.h>
 
 #define valid_port(idx) ((idx) == 1 || (idx) == 2)
 
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index a3a8fea..4626b00 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -13,10 +13,10 @@
  * This file is licenced under the GPL.
  */
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/badge4.h>
+#include <mach/assabet.h>
+#include <mach/badge4.h>
 #include <asm/hardware/sa1111.h>
 
 #ifndef CONFIG_SA1111
diff --git a/drivers/video/acornfb.c b/drivers/video/acornfb.c
index bad26c6..61c3d3f 100644
--- a/drivers/video/acornfb.c
+++ b/drivers/video/acornfb.c
@@ -29,7 +29,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
@@ -339,7 +339,7 @@
 #endif
 
 #ifdef HAS_VIDC20
-#include <asm/arch/acornfb.h>
+#include <mach/acornfb.h>
 
 #define MAX_SIZE	2*1024*1024
 
diff --git a/drivers/video/am200epd.c b/drivers/video/am200epd.c
index 32dd851..0c35b8b 100644
--- a/drivers/video/am200epd.c
+++ b/drivers/video/am200epd.c
@@ -33,7 +33,7 @@
 
 #include <video/metronomefb.h>
 
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 /* register offsets for gpio control */
 #define LED_GPIO_PIN 51
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 5b3a15d..e7018a2 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -18,9 +18,9 @@
 #include <linux/delay.h>
 #include <linux/backlight.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
+#include <mach/gpio.h>
 
 #include <video/atmel_lcdc.h>
 
diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c
index 891875d..cbad67e8 100644
--- a/drivers/video/backlight/omap1_bl.c
+++ b/drivers/video/backlight/omap1_bl.c
@@ -25,9 +25,9 @@
 #include <linux/fb.h>
 #include <linux/backlight.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/mux.h>
 
 #define OMAPBL_MAX_INTENSITY		0xff
 
diff --git a/drivers/video/clps711xfb.c b/drivers/video/clps711xfb.c
index 3701caa..16f5db4 100644
--- a/drivers/video/clps711xfb.c
+++ b/drivers/video/clps711xfb.c
@@ -27,12 +27,12 @@
 #include <linux/proc_fs.h>
 #include <linux/delay.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <linux/uaccess.h>
 
 #include <asm/hardware/clps7111.h>
-#include <asm/arch/syspld.h>
+#include <mach/syspld.h>
 
 struct fb_info	*cfb;
 
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c
index d0e4cb6..41d6263 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/cyber2000fb.c
@@ -1425,7 +1425,7 @@
 
 #ifdef CONFIG_ARCH_SHARK
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 static int __devinit cyberpro_vl_probe(void)
 {
diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c
index cc2810ef..2735b79 100644
--- a/drivers/video/epson1355fb.c
+++ b/drivers/video/epson1355fb.c
@@ -71,7 +71,7 @@
 #if defined(CONFIG_ARM)
 
 # ifdef CONFIG_ARCH_CEIVA
-#  include <asm/arch/hardware.h>
+#  include <mach/hardware.h>
 #  define EPSON1355FB_BASE_PHYS	(CEIVA_PHYS_SED1355)
 # endif
 
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index d28879f..ccd9861 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -33,9 +33,9 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/arch/imxfb.h>
+#include <mach/imxfb.h>
 
 /*
  * Complain if VAR is out of range.
diff --git a/drivers/video/omap/blizzard.c b/drivers/video/omap/blizzard.c
index 4d8ad9c..9dfcf39 100644
--- a/drivers/video/omap/blizzard.c
+++ b/drivers/video/omap/blizzard.c
@@ -26,9 +26,9 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/blizzard.h>
+#include <mach/dma.h>
+#include <mach/omapfb.h>
+#include <mach/blizzard.h>
 
 #include "dispc.h"
 
diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
index ab77c51..6efcf89 100644
--- a/drivers/video/omap/dispc.c
+++ b/drivers/video/omap/dispc.c
@@ -25,9 +25,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <asm/arch/sram.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/board.h>
+#include <mach/sram.h>
+#include <mach/omapfb.h>
+#include <mach/board.h>
 
 #include "dispc.h"
 
diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c
index 1e642b7..f24df0b 100644
--- a/drivers/video/omap/hwa742.c
+++ b/drivers/video/omap/hwa742.c
@@ -26,9 +26,9 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/hwa742.h>
+#include <mach/dma.h>
+#include <mach/omapfb.h>
+#include <mach/hwa742.h>
 
 #define HWA742_REV_CODE_REG       0x0
 #define HWA742_CONFIG_REG         0x2
diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c
index 31e9783..2486237 100644
--- a/drivers/video/omap/lcd_h3.c
+++ b/drivers/video/omap/lcd_h3.c
@@ -23,8 +23,8 @@
 #include <linux/platform_device.h>
 #include <linux/i2c/tps65010.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/omapfb.h>
+#include <mach/gpio.h>
+#include <mach/omapfb.h>
 
 #define MODULE_NAME	"omapfb-lcd_h3"
 
diff --git a/drivers/video/omap/lcd_h4.c b/drivers/video/omap/lcd_h4.c
index fd6f0eb..88c19d4 100644
--- a/drivers/video/omap/lcd_h4.c
+++ b/drivers/video/omap/lcd_h4.c
@@ -22,7 +22,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/omapfb.h>
+#include <mach/omapfb.h>
 
 static int h4_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
 {
diff --git a/drivers/video/omap/lcd_inn1510.c b/drivers/video/omap/lcd_inn1510.c
index 551f385..6953ed4 100644
--- a/drivers/video/omap/lcd_inn1510.c
+++ b/drivers/video/omap/lcd_inn1510.c
@@ -23,8 +23,8 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <asm/arch/fpga.h>
-#include <asm/arch/omapfb.h>
+#include <mach/fpga.h>
+#include <mach/omapfb.h>
 
 static int innovator1510_panel_init(struct lcd_panel *panel,
 				    struct omapfb_device *fbdev)
diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c
index 5ef119c..6a42c6a 100644
--- a/drivers/video/omap/lcd_inn1610.c
+++ b/drivers/video/omap/lcd_inn1610.c
@@ -22,8 +22,8 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/omapfb.h>
+#include <mach/gpio.h>
+#include <mach/omapfb.h>
 
 #define MODULE_NAME	"omapfb-lcd_h3"
 
diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c
index a380388..a4a725f 100644
--- a/drivers/video/omap/lcd_osk.c
+++ b/drivers/video/omap/lcd_osk.c
@@ -23,9 +23,9 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/omapfb.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/omapfb.h>
 
 static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
 {
diff --git a/drivers/video/omap/lcd_palmte.c b/drivers/video/omap/lcd_palmte.c
index 52bdfda..2183173 100644
--- a/drivers/video/omap/lcd_palmte.c
+++ b/drivers/video/omap/lcd_palmte.c
@@ -23,8 +23,8 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <asm/arch/fpga.h>
-#include <asm/arch/omapfb.h>
+#include <mach/fpga.h>
+#include <mach/omapfb.h>
 
 static int palmte_panel_init(struct lcd_panel *panel,
 				struct omapfb_device *fbdev)
diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/omap/lcd_palmtt.c
index 4bb349f..57b0f6c 100644
--- a/drivers/video/omap/lcd_palmtt.c
+++ b/drivers/video/omap/lcd_palmtt.c
@@ -29,8 +29,8 @@
 #include <linux/module.h>
 #include <linux/io.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/omapfb.h>
+#include <mach/gpio.h>
+#include <mach/omapfb.h>
 
 static int palmtt_panel_init(struct lcd_panel *panel,
 	struct omapfb_device *fbdev)
diff --git a/drivers/video/omap/lcd_palmz71.c b/drivers/video/omap/lcd_palmz71.c
index ea6170d..d33d78b 100644
--- a/drivers/video/omap/lcd_palmz71.c
+++ b/drivers/video/omap/lcd_palmz71.c
@@ -24,7 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <asm/arch/omapfb.h>
+#include <mach/omapfb.h>
 
 static int palmz71_panel_init(struct lcd_panel *panel,
 			      struct omapfb_device *fbdev)
diff --git a/drivers/video/omap/lcd_sx1.c b/drivers/video/omap/lcd_sx1.c
index c4f306a..caa6a89 100644
--- a/drivers/video/omap/lcd_sx1.c
+++ b/drivers/video/omap/lcd_sx1.c
@@ -23,10 +23,10 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/mux.h>
+#include <mach/gpio.h>
+#include <mach/omapfb.h>
+#include <mach/mcbsp.h>
+#include <mach/mux.h>
 
 /*
  * OMAP310 GPIO registers
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index fb19ed4..83514f0 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -29,8 +29,8 @@
 #include <linux/vmalloc.h>
 #include <linux/clk.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/omapfb.h>
+#include <mach/dma.h>
+#include <mach/omapfb.h>
 
 #include <asm/mach-types.h>
 
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index d9abc48..51a138b 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -28,8 +28,8 @@
 #include <linux/mm.h>
 #include <linux/uaccess.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/omapfb.h>
+#include <mach/dma.h>
+#include <mach/omapfb.h>
 
 #define MODULE_NAME	"omapfb"
 
diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c
index 789cfd23..4a6f13d 100644
--- a/drivers/video/omap/rfbi.c
+++ b/drivers/video/omap/rfbi.c
@@ -27,7 +27,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <asm/arch/omapfb.h>
+#include <mach/omapfb.h>
 
 #include "dispc.h"
 
diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c
index fafd0f2..6359353 100644
--- a/drivers/video/omap/sossi.c
+++ b/drivers/video/omap/sossi.c
@@ -24,8 +24,8 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/omapfb.h>
+#include <mach/dma.h>
+#include <mach/omapfb.h>
 
 #include "lcdc.h"
 
diff --git a/drivers/video/pnx4008/dum.h b/drivers/video/pnx4008/dum.h
index d80a614..1234d437 100644
--- a/drivers/video/pnx4008/dum.h
+++ b/drivers/video/pnx4008/dum.h
@@ -12,7 +12,7 @@
 #ifndef __PNX008_DUM_H__
 #define __PNX008_DUM_H__
 
-#include <asm/arch/platform.h>
+#include <mach/platform.h>
 
 #define PNX4008_DUMCONF_VA_BASE		IO_ADDRESS(PNX4008_DUMCONF_BASE)
 #define PNX4008_DUM_MAIN_VA_BASE	IO_ADDRESS(PNX4008_DUM_MAINCFG_BASE)
diff --git a/drivers/video/pnx4008/sdum.c b/drivers/video/pnx4008/sdum.c
index d23bf0d..2aa09bc 100644
--- a/drivers/video/pnx4008/sdum.c
+++ b/drivers/video/pnx4008/sdum.c
@@ -30,7 +30,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
 #include <asm/uaccess.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 #include "sdum.h"
 #include "fbcommon.h"
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 3169ea4..e7aa7ae 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -45,14 +45,14 @@
 #include <linux/kthread.h>
 #include <linux/freezer.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/div64.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/bitfield.h>
-#include <asm/arch/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/bitfield.h>
+#include <mach/pxafb.h>
 
 /*
  * Complain if VAR is out of range.
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index f059896..79cf0b19 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -29,9 +29,9 @@
 #include <asm/div64.h>
 
 #include <asm/mach/map.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/fb.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/fb.h>
 
 #ifdef CONFIG_PM
 #include <linux/pm.h>
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index 8fbcce6..c052bd4 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -177,11 +177,11 @@
 #include <linux/dma-mapping.h>
 #include <linux/mutex.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/shannon.h>
+#include <mach/assabet.h>
+#include <mach/shannon.h>
 
 /*
  * debugging?
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index 9ff9a95..bf872aa 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -21,7 +21,7 @@
 #include <linux/types.h>
 #include <linux/watchdog.h>
 #include <asm/uaccess.h>
-#include <asm/arch/at91_st.h>
+#include <mach/at91_st.h>
 
 
 #define WDT_DEFAULT_TIME	5	/* seconds */
diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
index 2ec36e0..003dffe 100644
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c
@@ -23,7 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c
index 7476844..af8ef14 100644
--- a/drivers/watchdog/ep93xx_wdt.c
+++ b/drivers/watchdog/ep93xx_wdt.c
@@ -29,7 +29,7 @@
 #include <linux/watchdog.h>
 #include <linux/timer.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/uaccess.h>
 
 #define WDT_VERSION	"0.3"
diff --git a/drivers/watchdog/iop_wdt.c b/drivers/watchdog/iop_wdt.c
index d37146f..1946dd0 100644
--- a/drivers/watchdog/iop_wdt.c
+++ b/drivers/watchdog/iop_wdt.c
@@ -32,7 +32,7 @@
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
 #include <linux/uaccess.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 static unsigned long wdt_status;
diff --git a/drivers/watchdog/ixp2000_wdt.c b/drivers/watchdog/ixp2000_wdt.c
index 884c2b4..4226dae 100644
--- a/drivers/watchdog/ixp2000_wdt.c
+++ b/drivers/watchdog/ixp2000_wdt.c
@@ -26,7 +26,7 @@
 #include <linux/init.h>
 #include <linux/bitops.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/uaccess.h>
 
 static int nowayout = WATCHDOG_NOWAYOUT;
diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c
index d4d37dac..2313fad 100644
--- a/drivers/watchdog/ixp4xx_wdt.c
+++ b/drivers/watchdog/ixp4xx_wdt.c
@@ -23,7 +23,7 @@
 #include <linux/init.h>
 #include <linux/bitops.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/uaccess.h>
 
 static int nowayout = WATCHDOG_NOWAYOUT;
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
index df5a6b8..d21a640 100644
--- a/drivers/watchdog/ks8695_wdt.c
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -21,7 +21,7 @@
 #include <linux/watchdog.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
-#include <asm/arch/regs-timer.h>
+#include <mach/regs-timer.h>
 
 
 #define WDT_DEFAULT_TIME	5	/* seconds */
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index 6dfb9cf..74a10d5 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -43,9 +43,9 @@
 
 #include <asm/io.h>
 #include <asm/uaccess.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/prcm.h>
+#include <mach/prcm.h>
 
 #include "omap_wdt.h"
 
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index 11a20678..f431a04 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -29,7 +29,7 @@
 #include <linux/clk.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 97b4a2e..f1fe800 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -49,7 +49,7 @@
 #include <linux/uaccess.h>
 #include <linux/io.h>
 
-#include <asm/arch/map.h>
+#include <mach/map.h>
 
 #undef S3C_VA_WATCHDOG
 #define S3C_VA_WATCHDOG (0)
diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c
index d985cba..52a533c 100644
--- a/drivers/watchdog/sa1100_wdt.c
+++ b/drivers/watchdog/sa1100_wdt.c
@@ -28,10 +28,10 @@
 #include <linux/bitops.h>
 
 #ifdef CONFIG_ARCH_PXA
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 #endif
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/uaccess.h>
 
 #define OSCR_FREQ		CLOCK_TICK_RATE
diff --git a/drivers/watchdog/wdt285.c b/drivers/watchdog/wdt285.c
index 00cd6f2..94e2d91c 100644
--- a/drivers/watchdog/wdt285.c
+++ b/drivers/watchdog/wdt285.c
@@ -29,7 +29,7 @@
 
 #include <asm/irq.h>
 #include <asm/uaccess.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/dec21285.h>
 
diff --git a/include/asm-arm/arch-aaec2000/aaec2000.h b/include/asm-arm/arch-aaec2000/aaec2000.h
deleted file mode 100644
index a6d1ee0..0000000
--- a/include/asm-arm/arch-aaec2000/aaec2000.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/aaec2000.h
- *
- *  AAEC-2000 registers definition
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_AAEC2000_H
-#define __ASM_ARCH_AAEC2000_H
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#error You must include hardware.h not this file
-#endif /* __ASM_ARCH_HARDWARE_H */
-
-/* Chip selects */
-#define AAEC_CS0	0x00000000
-#define AAEC_CS1	0x10000000
-#define AAEC_CS2	0x20000000
-#define AAEC_CS3	0x30000000
-
-/* Flash */
-#define AAEC_FLASH_BASE	AAEC_CS0
-#define AAEC_FLASH_SIZE	SZ_64M
-
-/* Interrupt controller */
-#define IRQ_BASE	__REG(0x80000500)
-#define IRQ_INTSR	__REG(0x80000500)	/* Int Status Register */
-#define IRQ_INTRSR	__REG(0x80000504)	/* Int Raw (unmasked) Status */
-#define IRQ_INTENS	__REG(0x80000508)	/* Int Enable Set */
-#define IRQ_INTENC	__REG(0x8000050c)	/* Int Enable Clear */
-
-/* UART 1 */
-#define UART1_BASE	__REG(0x80000600)
-#define UART1_DR	__REG(0x80000600) /* Data/FIFO Register */
-#define UART1_LCR	__REG(0x80000604) /* Link Control Register */
-#define UART1_BRCR	__REG(0x80000608) /* Baud Rate Control Register */
-#define UART1_CR	__REG(0x8000060c) /* Control Register */
-#define UART1_SR	__REG(0x80000610) /* Status Register */
-#define UART1_INT	__REG(0x80000614) /* Interrupt Status Register */
-#define UART1_INTM	__REG(0x80000618) /* Interrupt Mask Register */
-#define UART1_INTRES	__REG(0x8000061c) /* Int Result (masked status) Register */
-
-/* UART 2 */
-#define UART2_BASE	__REG(0x80000700)
-#define UART2_DR	__REG(0x80000700) /* Data/FIFO Register */
-#define UART2_LCR	__REG(0x80000704) /* Link Control Register */
-#define UART2_BRCR	__REG(0x80000708) /* Baud Rate Control Register */
-#define UART2_CR	__REG(0x8000070c) /* Control Register */
-#define UART2_SR	__REG(0x80000710) /* Status Register */
-#define UART2_INT	__REG(0x80000714) /* Interrupt Status Register */
-#define UART2_INTM	__REG(0x80000718) /* Interrupt Mask Register */
-#define UART2_INTRES	__REG(0x8000071c) /* Int Result (masked status) Register */
-
-/* UART 3 */
-#define UART3_BASE	__REG(0x80000800)
-#define UART3_DR	__REG(0x80000800) /* Data/FIFO Register */
-#define UART3_LCR	__REG(0x80000804) /* Link Control Register */
-#define UART3_BRCR	__REG(0x80000808) /* Baud Rate Control Register */
-#define UART3_CR	__REG(0x8000080c) /* Control Register */
-#define UART3_SR	__REG(0x80000810) /* Status Register */
-#define UART3_INT	__REG(0x80000814) /* Interrupt Status Register */
-#define UART3_INTM	__REG(0x80000818) /* Interrupt Mask Register */
-#define UART3_INTRES	__REG(0x8000081c) /* Int Result (masked status) Register */
-
-/* These are used in some places */
-#define _UART1_BASE __PREG(UART1_BASE)
-#define _UART2_BASE __PREG(UART2_BASE)
-#define _UART3_BASE __PREG(UART3_BASE)
-
-/* UART Registers Offsets */
-#define UART_DR		0x00
-#define UART_LCR	0x04
-#define UART_BRCR	0x08
-#define UART_CR		0x0c
-#define UART_SR		0x10
-#define UART_INT	0x14
-#define UART_INTM	0x18
-#define UART_INTRES	0x1c
-
-/* UART_LCR Bitmask */
-#define UART_LCR_BRK	(1 << 0) /* Send Break */
-#define UART_LCR_PEN	(1 << 1) /* Parity Enable */
-#define UART_LCR_EP	(1 << 2) /* Even/Odd Parity */
-#define UART_LCR_S2	(1 << 3) /* One/Two Stop bits */
-#define UART_LCR_FIFO	(1 << 4) /* FIFO Enable */
-#define UART_LCR_WL5	(0 << 5) /* Word Length - 5 bits */
-#define UART_LCR_WL6	(1 << 5) /* Word Length - 6 bits */
-#define UART_LCR_WL7	(1 << 6) /* Word Length - 7 bits */
-#define UART_LCR_WL8	(1 << 7) /* Word Length - 8 bits */
-
-/* UART_CR Bitmask */
-#define UART_CR_EN	(1 << 0) /* UART Enable */
-#define UART_CR_SIR	(1 << 1) /* IrDA SIR Enable */
-#define UART_CR_SIRLP	(1 << 2) /* Low Power IrDA Enable */
-#define UART_CR_RXP	(1 << 3) /* Receive Pin Polarity */
-#define UART_CR_TXP	(1 << 4) /* Transmit Pin Polarity */
-#define UART_CR_MXP	(1 << 5) /* Modem Pin Polarity */
-#define UART_CR_LOOP	(1 << 6) /* Loopback Mode */
-
-/* UART_SR Bitmask */
-#define UART_SR_CTS	(1 << 0) /* Clear To Send Status */
-#define UART_SR_DSR	(1 << 1) /* Data Set Ready Status */
-#define UART_SR_DCD	(1 << 2) /* Data Carrier Detect Status */
-#define UART_SR_TxBSY	(1 << 3) /* Transmitter Busy Status */
-#define UART_SR_RxFE	(1 << 4) /* Receive FIFO Empty Status */
-#define UART_SR_TxFF	(1 << 5) /* Transmit FIFO Full Status */
-#define UART_SR_RxFF	(1 << 6) /* Receive FIFO Full Status */
-#define UART_SR_TxFE	(1 << 7) /* Transmit FIFO Empty Status */
-
-/* UART_INT Bitmask */
-#define UART_INT_RIS	(1 << 0) /* Rx Interrupt */
-#define UART_INT_TIS	(1 << 1) /* Tx Interrupt */
-#define UART_INT_MIS	(1 << 2) /* Modem Interrupt */
-#define UART_INT_RTIS	(1 << 3) /* Receive Timeout Interrupt */
-
-/* Timer 1 */
-#define TIMER1_BASE	__REG(0x80000c00)
-#define TIMER1_LOAD	__REG(0x80000c00)	/* Timer 1 Load Register */
-#define TIMER1_VAL	__REG(0x80000c04)	/* Timer 1 Value Register */
-#define TIMER1_CTRL	__REG(0x80000c08)	/* Timer 1 Control Register */
-#define TIMER1_CLEAR	__REG(0x80000c0c)	/* Timer 1 Clear Register */
-
-/* Timer 2 */
-#define TIMER2_BASE	__REG(0x80000d00)
-#define TIMER2_LOAD	__REG(0x80000d00)	/* Timer 2 Load Register */
-#define TIMER2_VAL	__REG(0x80000d04)	/* Timer 2 Value Register */
-#define TIMER2_CTRL	__REG(0x80000d08)	/* Timer 2 Control Register */
-#define TIMER2_CLEAR	__REG(0x80000d0c)	/* Timer 2 Clear Register */
-
-/* Timer 3 */
-#define TIMER3_BASE	__REG(0x80000e00)
-#define TIMER3_LOAD	__REG(0x80000e00)	/* Timer 3 Load Register */
-#define TIMER3_VAL	__REG(0x80000e04)	/* Timer 3 Value Register */
-#define TIMER3_CTRL	__REG(0x80000e08)	/* Timer 3 Control Register */
-#define TIMER3_CLEAR	__REG(0x80000e0c)	/* Timer 3 Clear Register */
-
-/* Timer Control register bits */
-#define TIMER_CTRL_ENABLE	(1 << 7) /* Enable (Start Timer) */
-#define TIMER_CTRL_PERIODIC	(1 << 6) /* Periodic Running Mode */
-#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */
-#define TIMER_CTRL_CLKSEL_508K	(1 << 3) /* 508KHz Clock select (Timer 1, 2) */
-#define TIMER_CTRL_CLKSEL_2K	(0 << 3) /* 2KHz Clock Select (Timer 1, 2) */
-
-/* Power and State Control */
-#define POWER_BASE	__REG(0x80000400)
-#define POWER_PWRSR	__REG(0x80000400) /* Power Status Register */
-#define POWER_PWRCNT	__REG(0x80000404) /* Power/Clock control */
-#define POWER_HALT	__REG(0x80000408) /* Power Idle Mode */
-#define POWER_STDBY	__REG(0x8000040c) /* Power Standby Mode */
-#define POWER_BLEOI	__REG(0x80000410) /* Battery Low End of Interrupt */
-#define POWER_MCEOI	__REG(0x80000414) /* Media Changed EoI */
-#define POWER_TEOI	__REG(0x80000418) /* Tick EoI */
-#define POWER_STFCLR	__REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */
-#define POWER_CLKSET	__REG(0x80000420) /* Clock Speed Control */
-
-/* GPIO Registers */
-#define AAEC_GPIO_PHYS	0x80000e00
-
-#define AAEC_GPIO_PADR		__REG(AAEC_GPIO_PHYS + 0x00)
-#define AAEC_GPIO_PBDR		__REG(AAEC_GPIO_PHYS + 0x04)
-#define AAEC_GPIO_PCDR		__REG(AAEC_GPIO_PHYS + 0x08)
-#define AAEC_GPIO_PDDR		__REG(AAEC_GPIO_PHYS + 0x0c)
-#define AAEC_GPIO_PADDR		__REG(AAEC_GPIO_PHYS + 0x10)
-#define AAEC_GPIO_PBDDR		__REG(AAEC_GPIO_PHYS + 0x14)
-#define AAEC_GPIO_PCDDR		__REG(AAEC_GPIO_PHYS + 0x18)
-#define AAEC_GPIO_PDDDR		__REG(AAEC_GPIO_PHYS + 0x1c)
-#define AAEC_GPIO_PEDR		__REG(AAEC_GPIO_PHYS + 0x20)
-#define AAEC_GPIO_PEDDR		__REG(AAEC_GPIO_PHYS + 0x24)
-#define AAEC_GPIO_KSCAN		__REG(AAEC_GPIO_PHYS + 0x28)
-#define AAEC_GPIO_PINMUX	__REG(AAEC_GPIO_PHYS + 0x2c)
-#define AAEC_GPIO_PFDR		__REG(AAEC_GPIO_PHYS + 0x30)
-#define AAEC_GPIO_PFDDR		__REG(AAEC_GPIO_PHYS + 0x34)
-#define AAEC_GPIO_PGDR		__REG(AAEC_GPIO_PHYS + 0x38)
-#define AAEC_GPIO_PGDDR		__REG(AAEC_GPIO_PHYS + 0x3c)
-#define AAEC_GPIO_PHDR		__REG(AAEC_GPIO_PHYS + 0x40)
-#define AAEC_GPIO_PHDDR		__REG(AAEC_GPIO_PHYS + 0x44)
-#define AAEC_GPIO_RAZ		__REG(AAEC_GPIO_PHYS + 0x48)
-#define AAEC_GPIO_INTTYPE1	__REG(AAEC_GPIO_PHYS + 0x4c)
-#define AAEC_GPIO_INTTYPE2	__REG(AAEC_GPIO_PHYS + 0x50)
-#define AAEC_GPIO_FEOI		__REG(AAEC_GPIO_PHYS + 0x54)
-#define AAEC_GPIO_INTEN		__REG(AAEC_GPIO_PHYS + 0x58)
-#define AAEC_GPIO_INTSTATUS	__REG(AAEC_GPIO_PHYS + 0x5c)
-#define AAEC_GPIO_RAWINTSTATUS	__REG(AAEC_GPIO_PHYS + 0x60)
-#define AAEC_GPIO_DB		__REG(AAEC_GPIO_PHYS + 0x64)
-#define AAEC_GPIO_PAPINDR	__REG(AAEC_GPIO_PHYS + 0x68)
-#define AAEC_GPIO_PBPINDR	__REG(AAEC_GPIO_PHYS + 0x6c)
-#define AAEC_GPIO_PCPINDR	__REG(AAEC_GPIO_PHYS + 0x70)
-#define AAEC_GPIO_PDPINDR	__REG(AAEC_GPIO_PHYS + 0x74)
-#define AAEC_GPIO_PEPINDR	__REG(AAEC_GPIO_PHYS + 0x78)
-#define AAEC_GPIO_PFPINDR	__REG(AAEC_GPIO_PHYS + 0x7c)
-#define AAEC_GPIO_PGPINDR	__REG(AAEC_GPIO_PHYS + 0x80)
-#define AAEC_GPIO_PHPINDR	__REG(AAEC_GPIO_PHYS + 0x84)
-
-#define AAEC_GPIO_PINMUX_PE0CON		(1 << 0)
-#define AAEC_GPIO_PINMUX_PD0CON		(1 << 1)
-#define AAEC_GPIO_PINMUX_CODECON	(1 << 2)
-#define AAEC_GPIO_PINMUX_UART3CON	(1 << 3)
-
-/* LCD Controller */
-#define AAEC_CLCD_PHYS	0x80003000
-
-#endif /* __ARM_ARCH_AAEC2000_H */
diff --git a/include/asm-arm/arch-aaec2000/aaed2000.h b/include/asm-arm/arch-aaec2000/aaed2000.h
deleted file mode 100644
index bc76d2b..0000000
--- a/include/asm-arm/arch-aaec2000/aaed2000.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/aaed2000.h
- *
- *  AAED-2000 specific bits definition
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_AAED2000_H
-#define __ASM_ARCH_AAED2000_H
-
-/* External GPIOs. */
-
-#define EXT_GPIO_PBASE	AAEC_CS3
-#define EXT_GPIO_VBASE	0xf8100000
-#define EXT_GPIO_LENGTH	0x00001000
-
-#define __ext_gpio_p2v(x)	((x) - EXT_GPIO_PBASE + EXT_GPIO_VBASE)
-#define __ext_gpio_v2p(x)	((x) + EXT_GPIO_PBASE - EXT_GPIO_VBASE)
-
-#define __EXT_GPIO_REG(x)	(*((volatile u32 *)__ext_gpio_p2v(x)))
-#define __EXT_GPIO_PREG(x)	(__ext_gpio_v2p((u32)&(x)))
-
-#define AAED_EXT_GPIO	__EXT_GPIO_REG(EXT_GPIO_PBASE)
-
-#define AAED_EGPIO_KBD_SCAN	0x00003fff /* Keyboard scan data */
-#define AAED_EGPIO_PWR_INT	0x00008fff /* Smart battery charger interrupt */
-#define AAED_EGPIO_SWITCHED	0x000f0000 /* DIP Switches */
-#define AAED_EGPIO_USB_VBUS	0x00400000 /* USB Vbus sense */
-#define AAED_EGPIO_LCD_PWR_EN	0x02000000 /* LCD and backlight PWR enable */
-#define AAED_EGPIO_nLED0	0x20000000 /* LED 0 */
-#define AAED_EGPIO_nLED1	0x20000000 /* LED 1 */
-#define AAED_EGPIO_nLED2	0x20000000 /* LED 2 */
-
-
-#endif /* __ARM_ARCH_AAED2000_H */
diff --git a/include/asm-arm/arch-aaec2000/debug-macro.S b/include/asm-arm/arch-aaec2000/debug-macro.S
deleted file mode 100644
index 7b1fce0..0000000
--- a/include/asm-arm/arch-aaec2000/debug-macro.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*  linux/include/asm-arm/arch-aaec2000/debug-macro.S
- *
- *  Debugging macro include header
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include "hardware.h"
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x80000000		@ physical
-		movne	\rx, #io_p2v(0x80000000)	@ virtual
-		orr	\rx, \rx, #0x00000800
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0]
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #0x10]
-		tst	\rd, #(1 << 7)
-		beq	1002b
-		.endm
-
-		.macro	waituart,rd,rx
-#if 0
-1001:		ldr	\rd, [\rx, #0x10]
-		tst	\rd, #(1 << 5)
-		beq	1001b
-#endif
-		.endm
diff --git a/include/asm-arm/arch-aaec2000/dma.h b/include/asm-arm/arch-aaec2000/dma.h
deleted file mode 100644
index e100b1e..0000000
--- a/include/asm-arm/arch-aaec2000/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/dma.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
diff --git a/include/asm-arm/arch-aaec2000/entry-macro.S b/include/asm-arm/arch-aaec2000/entry-macro.S
deleted file mode 100644
index 83fdf68..0000000
--- a/include/asm-arm/arch-aaec2000/entry-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/entry-macro.S
- *
- *  Low-level IRQ helper for aaec-2000 based platforms
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-#include <asm/arch/irqs.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	r4, #0xf8000000
-		add	r4, r4, #0x00000500
-		mov	\base, r4
-		ldr	\irqstat, [\base, #0]
-		cmp	\irqstat, #0
-		bne	1001f
-		ldr	\irqnr, =NR_IRQS+1
-		b       1003f
-1001:		mov	\irqnr, #0
-1002:		ands	\tmp, \irqstat, #1
-		mov	\irqstat, \irqstat, LSR #1
-		add	\irqnr, \irqnr, #1
-		beq	1002b
-		sub	\irqnr, \irqnr, #1
-1003:
-		.endm
diff --git a/include/asm-arm/arch-aaec2000/hardware.h b/include/asm-arm/arch-aaec2000/hardware.h
deleted file mode 100644
index 153506f..0000000
--- a/include/asm-arm/arch-aaec2000/hardware.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/hardware.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <asm/arch/aaec2000.h>
-
-/* The kernel is loaded at physical address 0xf8000000.
- * We map the IO space a bit after
- */
-#define PIO_APB_BASE	0x80000000
-#define VIO_APB_BASE	0xf8000000
-#define IO_APB_LENGTH	0x2000
-#define PIO_AHB_BASE	0x80002000
-#define VIO_AHB_BASE	0xf8002000
-#define IO_AHB_LENGTH	0x2000
-
-#define VIO_BASE    VIO_APB_BASE
-#define PIO_BASE    PIO_APB_BASE
-
-#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE )
-#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE )
-
-#ifndef __ASSEMBLY__
-
-#include <asm/types.h>
-
-/* FIXME: Is it needed to optimize this a la pxa ?? */
-#define __REG(x)    (*((volatile u32 *)io_p2v(x)))
-#define __PREG(x)   (io_v2p((u32)&(x)))
-
-#else /* __ASSEMBLY__ */
-
-#define __REG(x)    io_p2v(x)
-#define __PREG(x)   io_v2p(x)
-
-#endif
-
-#include "aaec2000.h"
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-aaec2000/io.h b/include/asm-arm/arch-aaec2000/io.h
deleted file mode 100644
index bc2364ab..0000000
--- a/include/asm-arm/arch-aaec2000/io.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/io.h
- *
- *  Copied from asm/arch/sa1100/io.h
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-aaec2000/irqs.h b/include/asm-arm/arch-aaec2000/irqs.h
deleted file mode 100644
index de25222..0000000
--- a/include/asm-arm/arch-aaec2000/irqs.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/irqs.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-
-#define INT_GPIOF0_FIQ	0  /* External GPIO Port F O Fast Interrupt Input */
-#define INT_BL_FIQ	1  /* Battery Low Fast Interrupt */
-#define INT_WE_FIQ	2  /* Watchdog Expired Fast Interrupt */
-#define INT_MV_FIQ	3  /* Media Changed Interrupt */
-#define INT_SC		4  /* Sound Codec Interrupt */
-#define INT_GPIO1	5  /* GPIO Port F Configurable Int 1 */
-#define INT_GPIO2	6  /* GPIO Port F Configurable Int 2 */
-#define INT_GPIO3	7  /* GPIO Port F Configurable Int 3 */
-#define INT_TMR1_OFL	8  /* Timer 1 Overflow Interrupt */
-#define INT_TMR2_OFL	9  /* Timer 2 Overflow Interrupt */
-#define INT_RTC_CM	10 /* RTC Compare Match Interrupt */
-#define INT_TICK	11 /* 64Hz Tick Interrupt */
-#define INT_UART1	12 /* UART1 Interrupt */
-#define INT_UART2	13 /* UART2 & Modem State Changed Interrupt */
-#define INT_LCD		14 /* LCD Interrupt */
-#define INT_SSI		15 /* SSI End of Transfer Interrupt */
-#define INT_UART3	16 /* UART3 Interrupt */
-#define INT_SCI		17 /* SCI Interrupt */
-#define INT_AAC		18 /* Advanced Audio Codec Interrupt */
-#define INT_MMC		19 /* MMC Interrupt */
-#define INT_USB		20 /* USB Interrupt */
-#define INT_DMA		21 /* DMA Interrupt */
-#define INT_TMR3_UOFL	22 /* Timer 3 Underflow Interrupt */
-#define INT_GPIO4	23 /* GPIO Port F Configurable Int 4 */
-#define INT_GPIO5	24 /* GPIO Port F Configurable Int 4 */
-#define INT_GPIO6	25 /* GPIO Port F Configurable Int 4 */
-#define INT_GPIO7	26 /* GPIO Port F Configurable Int 4 */
-#define INT_BMI		27 /* BMI Interrupt */
-
-#define NR_IRQS		(INT_BMI + 1)
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/include/asm-arm/arch-aaec2000/memory.h b/include/asm-arm/arch-aaec2000/memory.h
deleted file mode 100644
index 9eceb414..0000000
--- a/include/asm-arm/arch-aaec2000/memory.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/memory.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-
-#define PHYS_OFFSET	UL(0xf0000000)
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-/*
- * The nodes are the followings:
- *
- *   node 0: 0xf000.0000 - 0xf3ff.ffff
- *   node 1: 0xf400.0000 - 0xf7ff.ffff
- *   node 2: 0xf800.0000 - 0xfbff.ffff
- *   node 3: 0xfc00.0000 - 0xffff.ffff
- */
-#define NODE_MEM_SIZE_BITS	26
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/include/asm-arm/arch-aaec2000/system.h b/include/asm-arm/arch-aaec2000/system.h
deleted file mode 100644
index 08de97b..0000000
--- a/include/asm-arm/arch-aaec2000/system.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaed2000/system.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	cpu_reset(0);
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/include/asm-arm/arch-aaec2000/timex.h b/include/asm-arm/arch-aaec2000/timex.h
deleted file mode 100644
index f5708b38..0000000
--- a/include/asm-arm/arch-aaec2000/timex.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/timex.h
- *
- *  AAEC-2000 Architecture timex specification
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#define CLOCK_TICK_RATE		508000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/include/asm-arm/arch-aaec2000/uncompress.h b/include/asm-arm/arch-aaec2000/uncompress.h
deleted file mode 100644
index 300f4bf..0000000
--- a/include/asm-arm/arch-aaec2000/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/uncompress.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include "hardware.h"
-
-#define UART(x)         (*(volatile unsigned long *)(serial_port + (x)))
-
-static void putc(int c)
-{
-	unsigned long serial_port;
-        do {
-		serial_port = _UART3_BASE;
-		if (UART(UART_CR) & UART_CR_EN) break;
-		serial_port = _UART1_BASE;
-		if (UART(UART_CR) & UART_CR_EN) break;
-		serial_port = _UART2_BASE;
-		if (UART(UART_CR) & UART_CR_EN) break;
-		return;
-	} while (0);
-
-	/* wait for space in the UART's transmitter */
-	while ((UART(UART_SR) & UART_SR_TxFF))
-		barrier();
-
-	/* send the character out. */
-	UART(UART_DR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/include/asm-arm/arch-aaec2000/vmalloc.h b/include/asm-arm/arch-aaec2000/vmalloc.h
deleted file mode 100644
index ecb991e2e..0000000
--- a/include/asm-arm/arch-aaec2000/vmalloc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/vmalloc.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END		(PAGE_OFFSET + 0x10000000)
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/include/asm-arm/arch-at91/at91_adc.h b/include/asm-arm/arch-at91/at91_adc.h
deleted file mode 100644
index 6d71ea26..0000000
--- a/include/asm-arm/arch-at91/at91_adc.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_adc.h
- *
- * Copyright (C) SAN People
- *
- * Analog-to-Digital Converter (ADC) registers.
- * Based on AT91SAM9260 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_ADC_H
-#define AT91_ADC_H
-
-#define AT91_ADC_CR		0x00		/* Control Register */
-#define		AT91_ADC_SWRST		(1 << 0)	/* Software Reset */
-#define		AT91_ADC_START		(1 << 1)	/* Start Conversion */
-
-#define AT91_ADC_MR		0x04		/* Mode Register */
-#define		AT91_ADC_TRGEN		(1 << 0)	/* Trigger Enable */
-#define		AT91_ADC_TRGSEL		(7 << 1)	/* Trigger Selection */
-#define			AT91_ADC_TRGSEL_TC0		(0 << 1)
-#define			AT91_ADC_TRGSEL_TC1		(1 << 1)
-#define			AT91_ADC_TRGSEL_TC2		(2 << 1)
-#define			AT91_ADC_TRGSEL_EXTERNAL	(6 << 1)
-#define		AT91_ADC_LOWRES		(1 << 4)	/* Low Resolution */
-#define		AT91_ADC_SLEEP		(1 << 5)	/* Sleep Mode */
-#define		AT91_ADC_PRESCAL	(0x3f << 8)	/* Prescalar Rate Selection */
-#define			AT91_ADC_PRESCAL_(x)	((x) << 8)
-#define		AT91_ADC_STARTUP	(0x1f << 16)	/* Startup Up Time */
-#define			AT91_ADC_STARTUP_(x)	((x) << 16)
-#define		AT91_ADC_SHTIM		(0xf  << 24)	/* Sample & Hold Time */
-#define			AT91_ADC_SHTIM_(x)	((x) << 24)
-
-#define AT91_ADC_CHER		0x10		/* Channel Enable Register */
-#define AT91_ADC_CHDR		0x14		/* Channel Disable Register */
-#define AT91_ADC_CHSR		0x18		/* Channel Status Register */
-#define		AT91_ADC_CH(n)		(1 << (n))	/* Channel Number */
-
-#define AT91_ADC_SR		0x1C		/* Status Register */
-#define		AT91_ADC_EOC(n)		(1 << (n))	/* End of Conversion on Channel N */
-#define		AT91_ADC_OVRE(n)	(1 << ((n) + 8))/* Overrun Error on Channel N */
-#define		AT91_ADC_DRDY		(1 << 16)	/* Data Ready */
-#define		AT91_ADC_GOVRE		(1 << 17)	/* General Overrun Error */
-#define		AT91_ADC_ENDRX		(1 << 18)	/* End of RX Buffer */
-#define		AT91_ADC_RXFUFF		(1 << 19)	/* RX Buffer Full */
-
-#define AT91_ADC_LCDR		0x20		/* Last Converted Data Register */
-#define		AT91_ADC_LDATA		(0x3ff)
-
-#define AT91_ADC_IER		0x24		/* Interrupt Enable Register */
-#define AT91_ADC_IDR		0x28		/* Interrupt Disable Register */
-#define AT91_ADC_IMR		0x2C		/* Interrupt Mask Register */
-
-#define AT91_ADC_CHR(n)		(0x30 + ((n) * 4))	/* Channel Data Register N */
-#define		AT91_ADC_DATA		(0x3ff)
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_aic.h b/include/asm-arm/arch-at91/at91_aic.h
deleted file mode 100644
index df44c12..0000000
--- a/include/asm-arm/arch-at91/at91_aic.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_aic.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Advanced Interrupt Controller (AIC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_AIC_H
-#define AT91_AIC_H
-
-#define AT91_AIC_SMR(n)		(AT91_AIC + ((n) * 4))	/* Source Mode Registers 0-31 */
-#define		AT91_AIC_PRIOR		(7 << 0)		/* Priority Level */
-#define		AT91_AIC_SRCTYPE	(3 << 5)		/* Interrupt Source Type */
-#define			AT91_AIC_SRCTYPE_LOW		(0 << 5)
-#define			AT91_AIC_SRCTYPE_FALLING	(1 << 5)
-#define			AT91_AIC_SRCTYPE_HIGH		(2 << 5)
-#define			AT91_AIC_SRCTYPE_RISING		(3 << 5)
-
-#define AT91_AIC_SVR(n)		(AT91_AIC + 0x80 + ((n) * 4))	/* Source Vector Registers 0-31 */
-#define AT91_AIC_IVR		(AT91_AIC + 0x100)	/* Interrupt Vector Register */
-#define AT91_AIC_FVR		(AT91_AIC + 0x104)	/* Fast Interrupt Vector Register */
-#define AT91_AIC_ISR		(AT91_AIC + 0x108)	/* Interrupt Status Register */
-#define		AT91_AIC_IRQID		(0x1f << 0)		/* Current Interrupt Identifier */
-
-#define AT91_AIC_IPR		(AT91_AIC + 0x10c)	/* Interrupt Pending Register */
-#define AT91_AIC_IMR		(AT91_AIC + 0x110)	/* Interrupt Mask Register */
-#define AT91_AIC_CISR		(AT91_AIC + 0x114)	/* Core Interrupt Status Register */
-#define		AT91_AIC_NFIQ		(1 << 0)		/* nFIQ Status */
-#define		AT91_AIC_NIRQ		(1 << 1)		/* nIRQ Status */
-
-#define AT91_AIC_IECR		(AT91_AIC + 0x120)	/* Interrupt Enable Command Register */
-#define AT91_AIC_IDCR		(AT91_AIC + 0x124)	/* Interrupt Disable Command Register */
-#define AT91_AIC_ICCR		(AT91_AIC + 0x128)	/* Interrupt Clear Command Register */
-#define AT91_AIC_ISCR		(AT91_AIC + 0x12c)	/* Interrupt Set Command Register */
-#define AT91_AIC_EOICR		(AT91_AIC + 0x130)	/* End of Interrupt Command Register */
-#define AT91_AIC_SPU		(AT91_AIC + 0x134)	/* Spurious Interrupt Vector Register */
-#define AT91_AIC_DCR		(AT91_AIC + 0x138)	/* Debug Control Register */
-#define		AT91_AIC_DCR_PROT	(1 << 0)		/* Protection Mode */
-#define		AT91_AIC_DCR_GMSK	(1 << 1)		/* General Mask */
-
-#define AT91_AIC_FFER		(AT91_AIC + 0x140)	/* Fast Forcing Enable Register [SAM9 only] */
-#define AT91_AIC_FFDR		(AT91_AIC + 0x144)	/* Fast Forcing Disable Register [SAM9 only] */
-#define AT91_AIC_FFSR		(AT91_AIC + 0x148)	/* Fast Forcing Status Register [SAM9 only] */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_dbgu.h b/include/asm-arm/arch-at91/at91_dbgu.h
deleted file mode 100644
index 8019ffd..0000000
--- a/include/asm-arm/arch-at91/at91_dbgu.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_dbgu.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Debug Unit (DBGU) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_DBGU_H
-#define AT91_DBGU_H
-
-#ifdef AT91_DBGU
-#define AT91_DBGU_CR		(AT91_DBGU + 0x00)	/* Control Register */
-#define AT91_DBGU_MR		(AT91_DBGU + 0x04)	/* Mode Register */
-#define AT91_DBGU_IER		(AT91_DBGU + 0x08)	/* Interrupt Enable Register */
-#define		AT91_DBGU_TXRDY		(1 << 1)		/* Transmitter Ready */
-#define		AT91_DBGU_TXEMPTY	(1 << 9)		/* Transmitter Empty */
-#define AT91_DBGU_IDR		(AT91_DBGU + 0x0c)	/* Interrupt Disable Register */
-#define AT91_DBGU_IMR		(AT91_DBGU + 0x10)	/* Interrupt Mask Register */
-#define AT91_DBGU_SR		(AT91_DBGU + 0x14)	/* Status Register */
-#define AT91_DBGU_RHR		(AT91_DBGU + 0x18)	/* Receiver Holding Register */
-#define AT91_DBGU_THR		(AT91_DBGU + 0x1c)	/* Transmitter Holding Register */
-#define AT91_DBGU_BRGR		(AT91_DBGU + 0x20)	/* Baud Rate Generator Register */
-
-#define AT91_DBGU_CIDR		(AT91_DBGU + 0x40)	/* Chip ID Register */
-#define AT91_DBGU_EXID		(AT91_DBGU + 0x44)	/* Chip ID Extension Register */
-#define AT91_DBGU_FNR		(AT91_DBGU + 0x48)	/* Force NTRST Register [SAM9 only] */
-#define		AT91_DBGU_FNTRST	(1 << 0)		/* Force NTRST */
-
-#endif /* AT91_DBGU */
-
-/*
- * Some AT91 parts that don't have full DEBUG units still support the ID
- * and extensions register.
- */
-#define		AT91_CIDR_VERSION	(0x1f << 0)		/* Version of the Device */
-#define		AT91_CIDR_EPROC		(7    << 5)		/* Embedded Processor */
-#define		AT91_CIDR_NVPSIZ	(0xf  << 8)		/* Nonvolatile Program Memory Size */
-#define		AT91_CIDR_NVPSIZ2	(0xf  << 12)		/* Second Nonvolatile Program Memory Size */
-#define		AT91_CIDR_SRAMSIZ	(0xf  << 16)		/* Internal SRAM Size */
-#define			AT91_CIDR_SRAMSIZ_1K	(1 << 16)
-#define			AT91_CIDR_SRAMSIZ_2K	(2 << 16)
-#define			AT91_CIDR_SRAMSIZ_112K	(4 << 16)
-#define			AT91_CIDR_SRAMSIZ_4K	(5 << 16)
-#define			AT91_CIDR_SRAMSIZ_80K	(6 << 16)
-#define			AT91_CIDR_SRAMSIZ_160K	(7 << 16)
-#define			AT91_CIDR_SRAMSIZ_8K	(8 << 16)
-#define			AT91_CIDR_SRAMSIZ_16K	(9 << 16)
-#define			AT91_CIDR_SRAMSIZ_32K	(10 << 16)
-#define			AT91_CIDR_SRAMSIZ_64K	(11 << 16)
-#define			AT91_CIDR_SRAMSIZ_128K	(12 << 16)
-#define			AT91_CIDR_SRAMSIZ_256K	(13 << 16)
-#define			AT91_CIDR_SRAMSIZ_96K	(14 << 16)
-#define			AT91_CIDR_SRAMSIZ_512K	(15 << 16)
-#define		AT91_CIDR_ARCH		(0xff << 20)		/* Architecture Identifier */
-#define		AT91_CIDR_NVPTYP	(7    << 28)		/* Nonvolatile Program Memory Type */
-#define		AT91_CIDR_EXT		(1    << 31)		/* Extension Flag */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_mci.h b/include/asm-arm/arch-at91/at91_mci.h
deleted file mode 100644
index 400ec10..0000000
--- a/include/asm-arm/arch-at91/at91_mci.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_mci.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * MultiMedia Card Interface (MCI) registers.
- * Based on AT91RM9200 datasheet revision F.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_MCI_H
-#define AT91_MCI_H
-
-#define AT91_MCI_CR		0x00		/* Control Register */
-#define		AT91_MCI_MCIEN		(1 <<  0)	/* Multi-Media Interface Enable */
-#define		AT91_MCI_MCIDIS		(1 <<  1)	/* Multi-Media Interface Disable */
-#define		AT91_MCI_PWSEN		(1 <<  2)	/* Power Save Mode Enable */
-#define		AT91_MCI_PWSDIS		(1 <<  3)	/* Power Save Mode Disable */
-#define		AT91_MCI_SWRST		(1 <<  7)	/* Software Reset */
-
-#define AT91_MCI_MR		0x04		/* Mode Register */
-#define		AT91_MCI_CLKDIV		(0xff  <<  0)	/* Clock Divider */
-#define		AT91_MCI_PWSDIV		(7     <<  8)	/* Power Saving Divider */
-#define		AT91_MCI_RDPROOF	(1     << 11)	/* Read Proof Enable [SAM926[03] only] */
-#define		AT91_MCI_WRPROOF	(1     << 12)	/* Write Proof Enable [SAM926[03] only] */
-#define		AT91_MCI_PDCFBYTE	(1     << 13)	/* PDC Force Byte Transfer [SAM926[03] only] */
-#define		AT91_MCI_PDCPADV	(1     << 14)	/* PDC Padding Value */
-#define		AT91_MCI_PDCMODE	(1     << 15)	/* PDC-orientated Mode */
-#define		AT91_MCI_BLKLEN		(0xfff << 18)	/* Data Block Length */
-
-#define AT91_MCI_DTOR		0x08		/* Data Timeout Register */
-#define		AT91_MCI_DTOCYC		(0xf << 0)	/* Data Timeout Cycle Number */
-#define		AT91_MCI_DTOMUL		(7   << 4)	/* Data Timeout Multiplier */
-#define		AT91_MCI_DTOMUL_1		(0 <<  4)
-#define		AT91_MCI_DTOMUL_16		(1 <<  4)
-#define		AT91_MCI_DTOMUL_128		(2 <<  4)
-#define		AT91_MCI_DTOMUL_256		(3 <<  4)
-#define		AT91_MCI_DTOMUL_1K		(4 <<  4)
-#define		AT91_MCI_DTOMUL_4K		(5 <<  4)
-#define		AT91_MCI_DTOMUL_64K		(6 <<  4)
-#define		AT91_MCI_DTOMUL_1M		(7 <<  4)
-
-#define AT91_MCI_SDCR		0x0c		/* SD Card Register */
-#define		AT91_MCI_SDCSEL		(3 << 0)	/* SD Card Selector */
-#define		AT91_MCI_SDCBUS		(1 << 7)	/* 1-bit or 4-bit bus */
-
-#define AT91_MCI_ARGR		0x10		/* Argument Register */
-
-#define AT91_MCI_CMDR		0x14		/* Command Register */
-#define		AT91_MCI_CMDNB		(0x3f << 0)	/* Command Number */
-#define		AT91_MCI_RSPTYP		(3    << 6)	/* Response Type */
-#define			AT91_MCI_RSPTYP_NONE	(0 <<  6)
-#define			AT91_MCI_RSPTYP_48	(1 <<  6)
-#define			AT91_MCI_RSPTYP_136	(2 <<  6)
-#define		AT91_MCI_SPCMD		(7    << 8)	/* Special Command */
-#define			AT91_MCI_SPCMD_NONE	(0 <<  8)
-#define			AT91_MCI_SPCMD_INIT	(1 <<  8)
-#define			AT91_MCI_SPCMD_SYNC	(2 <<  8)
-#define			AT91_MCI_SPCMD_ICMD	(4 <<  8)
-#define			AT91_MCI_SPCMD_IRESP	(5 <<  8)
-#define		AT91_MCI_OPDCMD		(1 << 11)	/* Open Drain Command */
-#define		AT91_MCI_MAXLAT		(1 << 12)	/* Max Latency for Command to Response */
-#define		AT91_MCI_TRCMD		(3 << 16)	/* Transfer Command */
-#define			AT91_MCI_TRCMD_NONE	(0 << 16)
-#define			AT91_MCI_TRCMD_START	(1 << 16)
-#define			AT91_MCI_TRCMD_STOP	(2 << 16)
-#define		AT91_MCI_TRDIR		(1 << 18)	/* Transfer Direction */
-#define		AT91_MCI_TRTYP		(3 << 19)	/* Transfer Type */
-#define			AT91_MCI_TRTYP_BLOCK	(0 << 19)
-#define			AT91_MCI_TRTYP_MULTIPLE	(1 << 19)
-#define			AT91_MCI_TRTYP_STREAM	(2 << 19)
-
-#define AT91_MCI_BLKR		0x18		/* Block Register */
-#define		AT91_MCI_BLKR_BCNT(n)	((0xffff & (n)) << 0)	/* Block count */
-#define		AT91_MCI_BLKR_BLKLEN(n)	((0xffff & (n)) << 16)	/* Block lenght */
-
-#define AT91_MCI_RSPR(n)	(0x20 + ((n) * 4))	/* Response Registers 0-3 */
-#define AT91_MCR_RDR		0x30		/* Receive Data Register */
-#define AT91_MCR_TDR		0x34		/* Transmit Data Register */
-
-#define AT91_MCI_SR		0x40		/* Status Register */
-#define		AT91_MCI_CMDRDY		(1 <<  0)	/* Command Ready */
-#define		AT91_MCI_RXRDY		(1 <<  1)	/* Receiver Ready */
-#define		AT91_MCI_TXRDY		(1 <<  2)	/* Transmit Ready */
-#define		AT91_MCI_BLKE		(1 <<  3)	/* Data Block Ended */
-#define		AT91_MCI_DTIP		(1 <<  4)	/* Data Transfer in Progress */
-#define		AT91_MCI_NOTBUSY	(1 <<  5)	/* Data Not Busy */
-#define		AT91_MCI_ENDRX		(1 <<  6)	/* End of RX Buffer */
-#define		AT91_MCI_ENDTX		(1 <<  7)	/* End fo TX Buffer */
-#define		AT91_MCI_SDIOIRQA	(1 <<  8)	/* SDIO Interrupt for Slot A */
-#define		AT91_MCI_SDIOIRQB	(1 <<  9)	/* SDIO Interrupt for Slot B */
-#define		AT91_MCI_RXBUFF		(1 << 14)	/* RX Buffer Full */
-#define		AT91_MCI_TXBUFE		(1 << 15)	/* TX Buffer Empty */
-#define		AT91_MCI_RINDE		(1 << 16)	/* Response Index Error */
-#define		AT91_MCI_RDIRE		(1 << 17)	/* Response Direction Error */
-#define		AT91_MCI_RCRCE		(1 << 18)	/* Response CRC Error */
-#define		AT91_MCI_RENDE		(1 << 19)	/* Response End Bit Error */
-#define		AT91_MCI_RTOE		(1 << 20)	/* Reponse Time-out Error */
-#define		AT91_MCI_DCRCE		(1 << 21)	/* Data CRC Error */
-#define		AT91_MCI_DTOE		(1 << 22)	/* Data Time-out Error */
-#define		AT91_MCI_OVRE		(1 << 30)	/* Overrun */
-#define		AT91_MCI_UNRE		(1 << 31)	/* Underrun */
-
-#define AT91_MCI_IER		0x44		/* Interrupt Enable Register */
-#define AT91_MCI_IDR		0x48		/* Interrupt Disable Register */
-#define AT91_MCI_IMR		0x4c		/* Interrupt Mask Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_pio.h b/include/asm-arm/arch-at91/at91_pio.h
deleted file mode 100644
index 84c3866..0000000
--- a/include/asm-arm/arch-at91/at91_pio.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_pio.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Parallel I/O Controller (PIO) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PIO_H
-#define AT91_PIO_H
-
-#define PIO_PER		0x00	/* Enable Register */
-#define PIO_PDR		0x04	/* Disable Register */
-#define PIO_PSR		0x08	/* Status Register */
-#define PIO_OER		0x10	/* Output Enable Register */
-#define PIO_ODR		0x14	/* Output Disable Register */
-#define PIO_OSR		0x18	/* Output Status Register */
-#define PIO_IFER	0x20	/* Glitch Input Filter Enable */
-#define PIO_IFDR	0x24	/* Glitch Input Filter Disable */
-#define PIO_IFSR	0x28	/* Glitch Input Filter Status */
-#define PIO_SODR	0x30	/* Set Output Data Register */
-#define PIO_CODR	0x34	/* Clear Output Data Register */
-#define PIO_ODSR	0x38	/* Output Data Status Register */
-#define PIO_PDSR	0x3c	/* Pin Data Status Register */
-#define PIO_IER		0x40	/* Interrupt Enable Register */
-#define PIO_IDR		0x44	/* Interrupt Disable Register */
-#define PIO_IMR		0x48	/* Interrupt Mask Register */
-#define PIO_ISR		0x4c	/* Interrupt Status Register */
-#define PIO_MDER	0x50	/* Multi-driver Enable Register */
-#define PIO_MDDR	0x54	/* Multi-driver Disable Register */
-#define PIO_MDSR	0x58	/* Multi-driver Status Register */
-#define PIO_PUDR	0x60	/* Pull-up Disable Register */
-#define PIO_PUER	0x64	/* Pull-up Enable Register */
-#define PIO_PUSR	0x68	/* Pull-up Status Register */
-#define PIO_ASR		0x70	/* Peripheral A Select Register */
-#define PIO_BSR		0x74	/* Peripheral B Select Register */
-#define PIO_ABSR	0x78	/* AB Status Register */
-#define PIO_OWER	0xa0	/* Output Write Enable Register */
-#define PIO_OWDR	0xa4	/* Output Write Disable Register */
-#define PIO_OWSR	0xa8	/* Output Write Status Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_pit.h b/include/asm-arm/arch-at91/at91_pit.h
deleted file mode 100644
index 5026325..0000000
--- a/include/asm-arm/arch-at91/at91_pit.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_pit.h
- *
- * Periodic Interval Timer (PIT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PIT_H
-#define AT91_PIT_H
-
-#define AT91_PIT_MR		(AT91_PIT + 0x00)	/* Mode Register */
-#define		AT91_PIT_PITIEN		(1 << 25)		/* Timer Interrupt Enable */
-#define		AT91_PIT_PITEN		(1 << 24)		/* Timer Enabled */
-#define		AT91_PIT_PIV		(0xfffff)		/* Periodic Interval Value */
-
-#define AT91_PIT_SR		(AT91_PIT + 0x04)	/* Status Register */
-#define		AT91_PIT_PITS		(1 << 0)		/* Timer Status */
-
-#define AT91_PIT_PIVR		(AT91_PIT + 0x08)	/* Periodic Interval Value Register */
-#define AT91_PIT_PIIR		(AT91_PIT + 0x0c)	/* Periodic Interval Image Register */
-#define		AT91_PIT_PICNT		(0xfff << 20)		/* Interval Counter */
-#define		AT91_PIT_CPIV		(0xfffff)		/* Inverval Value */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h
deleted file mode 100644
index 2001e81..0000000
--- a/include/asm-arm/arch-at91/at91_pmc.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_pmc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Power Management Controller (PMC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PMC_H
-#define AT91_PMC_H
-
-#define	AT91_PMC_SCER		(AT91_PMC + 0x00)	/* System Clock Enable Register */
-#define	AT91_PMC_SCDR		(AT91_PMC + 0x04)	/* System Clock Disable Register */
-
-#define	AT91_PMC_SCSR		(AT91_PMC + 0x08)	/* System Clock Status Register */
-#define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
-#define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
-#define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
-#define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
-#define		AT91CAP9_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91CAP9 only] */
-#define		AT91SAM926x_PMC_UDP	(1 <<  7)		/* USB Devcice Port Clock [AT91SAM926x only] */
-#define		AT91_PMC_PCK0		(1 <<  8)		/* Programmable Clock 0 */
-#define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
-#define		AT91_PMC_PCK2		(1 << 10)		/* Programmable Clock 2 */
-#define		AT91_PMC_PCK3		(1 << 11)		/* Programmable Clock 3 */
-#define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
-#define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
-
-#define	AT91_PMC_PCER		(AT91_PMC + 0x10)	/* Peripheral Clock Enable Register */
-#define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
-#define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
-
-#define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [SAM9RL, CAP9] */
-#define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
-#define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
-#define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
-#define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI PLL Start-up Time */
-
-#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
-#define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
-#define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [SAM9x, CAP9] */
-#define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
-
-#define	AT91_CKGR_MCFR		(AT91_PMC + 0x24)	/* Main Clock Frequency Register */
-#define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
-#define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
-
-#define	AT91_CKGR_PLLAR		(AT91_PMC + 0x28)	/* PLL A Register */
-#define	AT91_CKGR_PLLBR		(AT91_PMC + 0x2c)	/* PLL B Register */
-#define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
-#define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
-#define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
-#define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
-#define		AT91_PMC_USBDIV		(3     << 28)		/* USB Divisor (PLLB only) */
-#define			AT91_PMC_USBDIV_1		(0 << 28)
-#define			AT91_PMC_USBDIV_2		(1 << 28)
-#define			AT91_PMC_USBDIV_4		(2 << 28)
-#define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
-
-#define	AT91_PMC_MCKR		(AT91_PMC + 0x30)	/* Master Clock Register */
-#define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
-#define			AT91_PMC_CSS_SLOW		(0 << 0)
-#define			AT91_PMC_CSS_MAIN		(1 << 0)
-#define			AT91_PMC_CSS_PLLA		(2 << 0)
-#define			AT91_PMC_CSS_PLLB		(3 << 0)
-#define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
-#define			AT91_PMC_PRES_1			(0 << 2)
-#define			AT91_PMC_PRES_2			(1 << 2)
-#define			AT91_PMC_PRES_4			(2 << 2)
-#define			AT91_PMC_PRES_8			(3 << 2)
-#define			AT91_PMC_PRES_16		(4 << 2)
-#define			AT91_PMC_PRES_32		(5 << 2)
-#define			AT91_PMC_PRES_64		(6 << 2)
-#define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
-#define			AT91RM9200_PMC_MDIV_1		(0 << 8)	/* [AT91RM9200 only] */
-#define			AT91RM9200_PMC_MDIV_2		(1 << 8)
-#define			AT91RM9200_PMC_MDIV_3		(2 << 8)
-#define			AT91RM9200_PMC_MDIV_4		(3 << 8)
-#define			AT91SAM9_PMC_MDIV_1		(0 << 8)	/* [SAM9,CAP9 only] */
-#define			AT91SAM9_PMC_MDIV_2		(1 << 8)
-#define			AT91SAM9_PMC_MDIV_4		(2 << 8)
-#define			AT91SAM9_PMC_MDIV_6		(3 << 8)
-#define		AT91_PMC_PDIV		(1 << 12)		/* Processor Clock Division [some SAM9 only] */
-#define			AT91_PMC_PDIV_1			(0 << 12)
-#define			AT91_PMC_PDIV_2			(1 << 12)
-
-#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
-
-#define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
-#define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
-#define	AT91_PMC_SR		(AT91_PMC + 0x68)	/* Status Register */
-#define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
-#define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
-#define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
-#define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
-#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [AT91CAP9 only] */
-#define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
-#define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
-#define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
-#define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
-#define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_rstc.h b/include/asm-arm/arch-at91/at91_rstc.h
deleted file mode 100644
index fb8d161..0000000
--- a/include/asm-arm/arch-at91/at91_rstc.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_rstc.h
- *
- * Reset Controller (RSTC) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RSTC_H
-#define AT91_RSTC_H
-
-#define AT91_RSTC_CR		(AT91_RSTC + 0x00)	/* Reset Controller Control Register */
-#define		AT91_RSTC_PROCRST	(1 << 0)		/* Processor Reset */
-#define		AT91_RSTC_PERRST	(1 << 2)		/* Peripheral Reset */
-#define		AT91_RSTC_EXTRST	(1 << 3)		/* External Reset */
-#define		AT91_RSTC_KEY		(0xa5 << 24)		/* KEY Password */
-
-#define AT91_RSTC_SR		(AT91_RSTC + 0x04)	/* Reset Controller Status Register */
-#define		AT91_RSTC_URSTS		(1 << 0)		/* User Reset Status */
-#define		AT91_RSTC_RSTTYP	(7 << 8)		/* Reset Type */
-#define			AT91_RSTC_RSTTYP_GENERAL	(0 << 8)
-#define			AT91_RSTC_RSTTYP_WAKEUP		(1 << 8)
-#define			AT91_RSTC_RSTTYP_WATCHDOG	(2 << 8)
-#define			AT91_RSTC_RSTTYP_SOFTWARE	(3 << 8)
-#define			AT91_RSTC_RSTTYP_USER	(4 << 8)
-#define		AT91_RSTC_NRSTL		(1 << 16)		/* NRST Pin Level */
-#define		AT91_RSTC_SRCMP		(1 << 17)		/* Software Reset Command in Progress */
-
-#define AT91_RSTC_MR		(AT91_RSTC + 0x08)	/* Reset Controller Mode Register */
-#define		AT91_RSTC_URSTEN	(1 << 0)		/* User Reset Enable */
-#define		AT91_RSTC_URSTIEN	(1 << 4)		/* User Reset Interrupt Enable */
-#define		AT91_RSTC_ERSTL		(0xf << 8)		/* External Reset Length */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_rtc.h b/include/asm-arm/arch-at91/at91_rtc.h
deleted file mode 100644
index af9bd28..0000000
--- a/include/asm-arm/arch-at91/at91_rtc.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_rtc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Real Time Clock (RTC) - System peripheral registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RTC_H
-#define AT91_RTC_H
-
-#define	AT91_RTC_CR		(AT91_RTC + 0x00)	/* Control Register */
-#define		AT91_RTC_UPDTIM		(1 <<  0)		/* Update Request Time Register */
-#define		AT91_RTC_UPDCAL		(1 <<  1)		/* Update Request Calendar Register */
-#define		AT91_RTC_TIMEVSEL	(3 <<  8)		/* Time Event Selection */
-#define			AT91_RTC_TIMEVSEL_MINUTE	(0 << 8)
-#define			AT91_RTC_TIMEVSEL_HOUR		(1 << 8)
-#define			AT91_RTC_TIMEVSEL_DAY24		(2 << 8)
-#define			AT91_RTC_TIMEVSEL_DAY12		(3 << 8)
-#define		AT91_RTC_CALEVSEL	(3 << 16)		/* Calendar Event Selection */
-#define			AT91_RTC_CALEVSEL_WEEK		(0 << 16)
-#define			AT91_RTC_CALEVSEL_MONTH		(1 << 16)
-#define			AT91_RTC_CALEVSEL_YEAR		(2 << 16)
-
-#define	AT91_RTC_MR		(AT91_RTC + 0x04)	/* Mode Register */
-#define			AT91_RTC_HRMOD		(1 <<  0)		/* 12/24 Hour Mode */
-
-#define	AT91_RTC_TIMR		(AT91_RTC + 0x08)	/* Time Register */
-#define		AT91_RTC_SEC		(0x7f <<  0)		/* Current Second */
-#define		AT91_RTC_MIN		(0x7f <<  8)		/* Current Minute */
-#define		AT91_RTC_HOUR		(0x3f << 16)		/* Current Hour */
-#define		AT91_RTC_AMPM		(1    << 22)		/* Ante Meridiem Post Meridiem Indicator */
-
-#define	AT91_RTC_CALR		(AT91_RTC + 0x0c)	/* Calendar Register */
-#define		AT91_RTC_CENT		(0x7f <<  0)		/* Current Century */
-#define		AT91_RTC_YEAR		(0xff <<  8)		/* Current Year */
-#define		AT91_RTC_MONTH		(0x1f << 16)		/* Current Month */
-#define		AT91_RTC_DAY		(7    << 21)		/* Current Day */
-#define		AT91_RTC_DATE		(0x3f << 24)		/* Current Date */
-
-#define	AT91_RTC_TIMALR		(AT91_RTC + 0x10)	/* Time Alarm Register */
-#define		AT91_RTC_SECEN		(1 <<  7)		/* Second Alarm Enable */
-#define		AT91_RTC_MINEN		(1 << 15)		/* Minute Alarm Enable */
-#define		AT91_RTC_HOUREN		(1 << 23)		/* Hour Alarm Enable */
-
-#define	AT91_RTC_CALALR		(AT91_RTC + 0x14)	/* Calendar Alarm Register */
-#define		AT91_RTC_MTHEN		(1 << 23)		/* Month Alarm Enable */
-#define		AT91_RTC_DATEEN		(1 << 31)		/* Date Alarm Enable */
-
-#define	AT91_RTC_SR		(AT91_RTC + 0x18)	/* Status Register */
-#define		AT91_RTC_ACKUPD		(1 <<  0)		/* Acknowledge for Update */
-#define		AT91_RTC_ALARM		(1 <<  1)		/* Alarm Flag */
-#define		AT91_RTC_SECEV		(1 <<  2)		/* Second Event */
-#define		AT91_RTC_TIMEV		(1 <<  3)		/* Time Event */
-#define		AT91_RTC_CALEV		(1 <<  4)		/* Calendar Event */
-
-#define	AT91_RTC_SCCR		(AT91_RTC + 0x1c)	/* Status Clear Command Register */
-#define	AT91_RTC_IER		(AT91_RTC + 0x20)	/* Interrupt Enable Register */
-#define	AT91_RTC_IDR		(AT91_RTC + 0x24)	/* Interrupt Disable Register */
-#define	AT91_RTC_IMR		(AT91_RTC + 0x28)	/* Interrupt Mask Register */
-
-#define	AT91_RTC_VER		(AT91_RTC + 0x2c)	/* Valid Entry Register */
-#define		AT91_RTC_NVTIM		(1 <<  0)		/* Non valid Time */
-#define		AT91_RTC_NVCAL		(1 <<  1)		/* Non valid Calendar */
-#define		AT91_RTC_NVTIMALR	(1 <<  2)		/* Non valid Time Alarm */
-#define		AT91_RTC_NVCALALR	(1 <<  3)		/* Non valid Calendar Alarm */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_rtt.h b/include/asm-arm/arch-at91/at91_rtt.h
deleted file mode 100644
index 39a3263..0000000
--- a/include/asm-arm/arch-at91/at91_rtt.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_rtt.h
- *
- * Real-time Timer (RTT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RTT_H
-#define AT91_RTT_H
-
-#define AT91_RTT_MR		0x00			/* Real-time Mode Register */
-#define		AT91_RTT_RTPRES		(0xffff << 0)		/* Real-time Timer Prescaler Value */
-#define		AT91_RTT_ALMIEN		(1 << 16)		/* Alarm Interrupt Enable */
-#define		AT91_RTT_RTTINCIEN	(1 << 17)		/* Real Time Timer Increment Interrupt Enable */
-#define		AT91_RTT_RTTRST		(1 << 18)		/* Real Time Timer Restart */
-
-#define AT91_RTT_AR		0x04			/* Real-time Alarm Register */
-#define		AT91_RTT_ALMV		(0xffffffff)		/* Alarm Value */
-
-#define AT91_RTT_VR		0x08			/* Real-time Value Register */
-#define		AT91_RTT_CRTV		(0xffffffff)		/* Current Real-time Value */
-
-#define AT91_RTT_SR		0x0c			/* Real-time Status Register */
-#define		AT91_RTT_ALMS		(1 << 0)		/* Real-time Alarm Status */
-#define		AT91_RTT_RTTINC		(1 << 1)		/* Real-time Timer Increment */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_shdwc.h b/include/asm-arm/arch-at91/at91_shdwc.h
deleted file mode 100644
index 581fa41..0000000
--- a/include/asm-arm/arch-at91/at91_shdwc.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_shdwc.h
- *
- * Shutdown Controller (SHDWC) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SHDWC_H
-#define AT91_SHDWC_H
-
-#define AT91_SHDW_CR		(AT91_SHDWC + 0x00)	/* Shut Down Control Register */
-#define		AT91_SHDW_SHDW		(1    << 0)		/* Shut Down command */
-#define		AT91_SHDW_KEY		(0xa5 << 24)		/* KEY Password */
-
-#define AT91_SHDW_MR		(AT91_SHDWC + 0x04)	/* Shut Down Mode Register */
-#define		AT91_SHDW_WKMODE0	(3 << 0)		/* Wake-up 0 Mode Selection */
-#define			AT91_SHDW_WKMODE0_NONE		0
-#define			AT91_SHDW_WKMODE0_HIGH		1
-#define			AT91_SHDW_WKMODE0_LOW		2
-#define			AT91_SHDW_WKMODE0_ANYLEVEL	3
-#define		AT91_SHDW_CPTWK0	(0xf << 4)		/* Counter On Wake Up 0 */
-#define			AT91_SHDW_CPTWK0_(x)	((x) << 4)
-#define		AT91_SHDW_RTTWKEN	(1   << 16)		/* Real Time Timer Wake-up Enable */
-
-#define AT91_SHDW_SR		(AT91_SHDWC + 0x08)	/* Shut Down Status Register */
-#define		AT91_SHDW_WAKEUP0	(1 <<  0)		/* Wake-up 0 Status */
-#define		AT91_SHDW_RTTWK		(1 << 16)		/* Real-time Timer Wake-up */
-#define		AT91_SHDW_RTCWK		(1 << 17)		/* Real-time Clock Wake-up [SAM9RL] */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_spi.h b/include/asm-arm/arch-at91/at91_spi.h
deleted file mode 100644
index f9b9a84..0000000
--- a/include/asm-arm/arch-at91/at91_spi.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_spi.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Serial Peripheral Interface (SPI) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SPI_H
-#define AT91_SPI_H
-
-#define AT91_SPI_CR			0x00		/* Control Register */
-#define		AT91_SPI_SPIEN		(1 <<  0)		/* SPI Enable */
-#define		AT91_SPI_SPIDIS		(1 <<  1)		/* SPI Disable */
-#define		AT91_SPI_SWRST		(1 <<  7)		/* SPI Software Reset */
-#define		AT91_SPI_LASTXFER	(1 << 24)		/* Last Transfer [SAM9261 only] */
-
-#define AT91_SPI_MR			0x04		/* Mode Register */
-#define		AT91_SPI_MSTR		(1    <<  0)		/* Master/Slave Mode */
-#define		AT91_SPI_PS		(1    <<  1)		/* Peripheral Select */
-#define			AT91_SPI_PS_FIXED	(0 << 1)
-#define			AT91_SPI_PS_VARIABLE	(1 << 1)
-#define		AT91_SPI_PCSDEC		(1    <<  2)		/* Chip Select Decode */
-#define		AT91_SPI_DIV32		(1    <<  3)		/* Clock Selection [AT91RM9200 only] */
-#define		AT91_SPI_MODFDIS	(1    <<  4)		/* Mode Fault Detection */
-#define		AT91_SPI_LLB		(1    <<  7)		/* Local Loopback Enable */
-#define		AT91_SPI_PCS		(0xf  << 16)		/* Peripheral Chip Select */
-#define		AT91_SPI_DLYBCS		(0xff << 24)		/* Delay Between Chip Selects */
-
-#define AT91_SPI_RDR		0x08			/* Receive Data Register */
-#define		AT91_SPI_RD		(0xffff <<  0)		/* Receive Data */
-#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
-
-#define AT91_SPI_TDR		0x0c			/* Transmit Data Register */
-#define		AT91_SPI_TD		(0xffff <<  0)		/* Transmit Data */
-#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
-#define		AT91_SPI_LASTXFER	(1	<< 24)		/* Last Transfer [SAM9261 only] */
-
-#define AT91_SPI_SR		0x10			/* Status Register */
-#define		AT91_SPI_RDRF		(1 <<  0)		/* Receive Data Register Full */
-#define		AT91_SPI_TDRE		(1 <<  1)		/* Transmit Data Register Full */
-#define		AT91_SPI_MODF		(1 <<  2)		/* Mode Fault Error */
-#define		AT91_SPI_OVRES		(1 <<  3)		/* Overrun Error Status */
-#define		AT91_SPI_ENDRX		(1 <<  4)		/* End of RX buffer */
-#define		AT91_SPI_ENDTX		(1 <<  5)		/* End of TX buffer */
-#define		AT91_SPI_RXBUFF		(1 <<  6)		/* RX Buffer Full */
-#define		AT91_SPI_TXBUFE		(1 <<  7)		/* TX Buffer Empty */
-#define		AT91_SPI_NSSR		(1 <<  8)		/* NSS Rising [SAM9261 only] */
-#define		AT91_SPI_TXEMPTY	(1 <<  9)		/* Transmission Register Empty [SAM9261 only] */
-#define		AT91_SPI_SPIENS		(1 << 16)		/* SPI Enable Status */
-
-#define AT91_SPI_IER		0x14			/* Interrupt Enable Register */
-#define AT91_SPI_IDR		0x18			/* Interrupt Disable Register */
-#define AT91_SPI_IMR		0x1c			/* Interrupt Mask Register */
-
-#define AT91_SPI_CSR(n)		(0x30 + ((n) * 4))	/* Chip Select Registers 0-3 */
-#define		AT91_SPI_CPOL		(1    <<  0)		/* Clock Polarity */
-#define		AT91_SPI_NCPHA		(1    <<  1)		/* Clock Phase */
-#define		AT91_SPI_CSAAT		(1    <<  3)		/* Chip Select Active After Transfer [SAM9261 only] */
-#define		AT91_SPI_BITS		(0xf  <<  4)		/* Bits Per Transfer */
-#define			AT91_SPI_BITS_8		(0 << 4)
-#define			AT91_SPI_BITS_9		(1 << 4)
-#define			AT91_SPI_BITS_10	(2 << 4)
-#define			AT91_SPI_BITS_11	(3 << 4)
-#define			AT91_SPI_BITS_12	(4 << 4)
-#define			AT91_SPI_BITS_13	(5 << 4)
-#define			AT91_SPI_BITS_14	(6 << 4)
-#define			AT91_SPI_BITS_15	(7 << 4)
-#define			AT91_SPI_BITS_16	(8 << 4)
-#define		AT91_SPI_SCBR		(0xff <<  8)		/* Serial Clock Baud Rate */
-#define		AT91_SPI_DLYBS		(0xff << 16)		/* Delay before SPCK */
-#define		AT91_SPI_DLYBCT		(0xff << 24)		/* Delay between Consecutive Transfers */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_ssc.h b/include/asm-arm/arch-at91/at91_ssc.h
deleted file mode 100644
index 0ecc734..0000000
--- a/include/asm-arm/arch-at91/at91_ssc.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_ssc.h
- *
- * Copyright (C) SAN People
- *
- * Serial Synchronous Controller (SSC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SSC_H
-#define AT91_SSC_H
-
-#define AT91_SSC_CR		0x00	/* Control Register */
-#define		AT91_SSC_RXEN		(1 <<  0)	/* Receive Enable */
-#define		AT91_SSC_RXDIS		(1 <<  1)	/* Receive Disable */
-#define		AT91_SSC_TXEN		(1 <<  8)	/* Transmit Enable */
-#define		AT91_SSC_TXDIS		(1 <<  9)	/* Transmit Disable */
-#define		AT91_SSC_SWRST		(1 << 15)	/* Software Reset */
-
-#define AT91_SSC_CMR		0x04	/* Clock Mode Register */
-#define		AT91_SSC_CMR_DIV	(0xfff << 0)	/* Clock Divider */
-
-#define AT91_SSC_RCMR		0x10	/* Receive Clock Mode Register */
-#define		AT91_SSC_CKS		(3    <<  0)	/* Clock Selection */
-#define			AT91_SSC_CKS_DIV		(0 << 0)
-#define			AT91_SSC_CKS_CLOCK		(1 << 0)
-#define			AT91_SSC_CKS_PIN		(2 << 0)
-#define		AT91_SSC_CKO		(7    <<  2)	/* Clock Output Mode Selection */
-#define			AT91_SSC_CKO_NONE		(0 << 2)
-#define			AT91_SSC_CKO_CONTINUOUS		(1 << 2)
-#define		AT91_SSC_CKI		(1    <<  5)	/* Clock Inversion */
-#define			AT91_SSC_CKI_FALLING		(0 << 5)
-#define			AT91_SSC_CK_RISING		(1 << 5)
-#define		AT91_SSC_CKG		(1    <<  6)	/* Receive Clock Gating Selection [AT91SAM9261 only] */
-#define			AT91_SSC_CKG_NONE		(0 << 6)
-#define			AT91_SSC_CKG_RFLOW		(1 << 6)
-#define			AT91_SSC_CKG_RFHIGH		(2 << 6)
-#define		AT91_SSC_START		(0xf  <<  8)	/* Start Selection */
-#define			AT91_SSC_START_CONTINUOUS	(0 << 8)
-#define			AT91_SSC_START_TX_RX		(1 << 8)
-#define			AT91_SSC_START_LOW_RF		(2 << 8)
-#define			AT91_SSC_START_HIGH_RF		(3 << 8)
-#define			AT91_SSC_START_FALLING_RF	(4 << 8)
-#define			AT91_SSC_START_RISING_RF	(5 << 8)
-#define			AT91_SSC_START_LEVEL_RF		(6 << 8)
-#define			AT91_SSC_START_EDGE_RF		(7 << 8)
-#define		AT91_SSC_STOP		(1    << 12)	/* Receive Stop Selection [AT91SAM9261 only] */
-#define		AT91_SSC_STTDLY		(0xff << 16)	/* Start Delay */
-#define		AT91_SSC_PERIOD		(0xff << 24)	/* Period Divider Selection */
-
-#define AT91_SSC_RFMR		0x14	/* Receive Frame Mode Register */
-#define		AT91_SSC_DATALEN	(0x1f <<  0)	/* Data Length */
-#define		AT91_SSC_LOOP		(1    <<  5)	/* Loop Mode */
-#define		AT91_SSC_MSBF		(1    <<  7)	/* Most Significant Bit First */
-#define		AT91_SSC_DATNB		(0xf  <<  8)	/* Data Number per Frame */
-#define		AT91_SSC_FSLEN		(0xf  << 16)	/* Frame Sync Length */
-#define		AT91_SSC_FSOS		(7    << 20)	/* Frame Sync Output Selection */
-#define			AT91_SSC_FSOS_NONE		(0 << 20)
-#define			AT91_SSC_FSOS_NEGATIVE		(1 << 20)
-#define			AT91_SSC_FSOS_POSITIVE		(2 << 20)
-#define			AT91_SSC_FSOS_LOW		(3 << 20)
-#define			AT91_SSC_FSOS_HIGH		(4 << 20)
-#define			AT91_SSC_FSOS_TOGGLE		(5 << 20)
-#define		AT91_SSC_FSEDGE		(1    << 24)	/* Frame Sync Edge Detection */
-#define			AT91_SSC_FSEDGE_POSITIVE	(0 << 24)
-#define			AT91_SSC_FSEDGE_NEGATIVE	(1 << 24)
-
-#define AT91_SSC_TCMR		0x18	/* Transmit Clock Mode Register */
-#define AT91_SSC_TFMR		0x1c	/* Transmit Fram Mode Register */
-#define		AT91_SSC_DATDEF		(1 <<  5)	/* Data Default Value */
-#define		AT91_SSC_FSDEN		(1 << 23)	/* Frame Sync Data Enable */
-
-#define AT91_SSC_RHR		0x20	/* Receive Holding Register */
-#define AT91_SSC_THR		0x24	/* Transmit Holding Register */
-#define AT91_SSC_RSHR		0x30	/* Receive Sync Holding Register */
-#define AT91_SSC_TSHR		0x34	/* Transmit Sync Holding Register */
-
-#define AT91_SSC_RC0R		0x38	/* Receive Compare 0 Register [AT91SAM9261 only] */
-#define AT91_SSC_RC1R		0x3c	/* Receive Compare 1 Register [AT91SAM9261 only] */
-
-#define AT91_SSC_SR		0x40	/* Status Register */
-#define		AT91_SSC_TXRDY		(1 <<  0)	/* Transmit Ready */
-#define		AT91_SSC_TXEMPTY	(1 <<  1)	/* Transmit Empty */
-#define		AT91_SSC_ENDTX		(1 <<  2)	/* End of Transmission */
-#define		AT91_SSC_TXBUFE		(1 <<  3)	/* Transmit Buffer Empty */
-#define		AT91_SSC_RXRDY		(1 <<  4)	/* Receive Ready */
-#define		AT91_SSC_OVRUN		(1 <<  5)	/* Receive Overrun */
-#define		AT91_SSC_ENDRX		(1 <<  6)	/* End of Reception */
-#define		AT91_SSC_RXBUFF		(1 <<  7)	/* Receive Buffer Full */
-#define		AT91_SSC_CP0		(1 <<  8)	/* Compare 0 [AT91SAM9261 only] */
-#define		AT91_SSC_CP1		(1 <<  9)	/* Compare 1 [AT91SAM9261 only] */
-#define		AT91_SSC_TXSYN		(1 << 10)	/* Transmit Sync */
-#define		AT91_SSC_RXSYN		(1 << 11)	/* Receive Sync */
-#define		AT91_SSC_TXENA		(1 << 16)	/* Transmit Enable */
-#define		AT91_SSC_RXENA		(1 << 17)	/* Receive Enable */
-
-#define AT91_SSC_IER		0x44	/* Interrupt Enable Register */
-#define AT91_SSC_IDR		0x48	/* Interrupt Disable Register */
-#define AT91_SSC_IMR		0x4c	/* Interrupt Mask Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_st.h b/include/asm-arm/arch-at91/at91_st.h
deleted file mode 100644
index 30446e2e..0000000
--- a/include/asm-arm/arch-at91/at91_st.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_st.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * System Timer (ST) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_ST_H
-#define AT91_ST_H
-
-#define	AT91_ST_CR		(AT91_ST + 0x00)	/* Control Register */
-#define 	AT91_ST_WDRST		(1 << 0)		/* Watchdog Timer Restart */
-
-#define	AT91_ST_PIMR		(AT91_ST + 0x04)	/* Period Interval Mode Register */
-#define		AT91_ST_PIV		(0xffff <<  0)		/* Period Interval Value */
-
-#define	AT91_ST_WDMR		(AT91_ST + 0x08)	/* Watchdog Mode Register */
-#define		AT91_ST_WDV		(0xffff <<  0)		/* Watchdog Counter Value */
-#define		AT91_ST_RSTEN		(1	<< 16)		/* Reset Enable */
-#define		AT91_ST_EXTEN		(1	<< 17)		/* External Signal Assertion Enable */
-
-#define	AT91_ST_RTMR		(AT91_ST + 0x0c)	/* Real-time Mode Register */
-#define		AT91_ST_RTPRES		(0xffff <<  0)		/* Real-time Prescalar Value */
-
-#define	AT91_ST_SR		(AT91_ST + 0x10)	/* Status Register */
-#define		AT91_ST_PITS		(1 << 0)		/* Period Interval Timer Status */
-#define		AT91_ST_WDOVF		(1 << 1) 		/* Watchdog Overflow */
-#define		AT91_ST_RTTINC		(1 << 2) 		/* Real-time Timer Increment */
-#define		AT91_ST_ALMS		(1 << 3) 		/* Alarm Status */
-
-#define	AT91_ST_IER		(AT91_ST + 0x14)	/* Interrupt Enable Register */
-#define	AT91_ST_IDR		(AT91_ST + 0x18)	/* Interrupt Disable Register */
-#define	AT91_ST_IMR		(AT91_ST + 0x1c)	/* Interrupt Mask Register */
-
-#define	AT91_ST_RTAR		(AT91_ST + 0x20)	/* Real-time Alarm Register */
-#define		AT91_ST_ALMV		(0xfffff << 0)		/* Alarm Value */
-
-#define	AT91_ST_CRTR		(AT91_ST + 0x24)	/* Current Real-time Register */
-#define		AT91_ST_CRTV		(0xfffff << 0)		/* Current Real-Time Value */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_tc.h b/include/asm-arm/arch-at91/at91_tc.h
deleted file mode 100644
index b85d3fa..0000000
--- a/include/asm-arm/arch-at91/at91_tc.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_tc.h
- *
- * Copyright (C) SAN People
- *
- * Timer/Counter Unit (TC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_TC_H
-#define AT91_TC_H
-
-#define AT91_TC_BCR		0xc0		/* TC Block Control Register */
-#define		AT91_TC_SYNC		(1 << 0)	/* Synchro Command */
-
-#define AT91_TC_BMR		0xc4		/* TC Block Mode Register */
-#define		AT91_TC_TC0XC0S		(3 << 0)	/* External Clock Signal 0 Selection */
-#define			AT91_TC_TC0XC0S_TCLK0		(0 << 0)
-#define			AT91_TC_TC0XC0S_NONE		(1 << 0)
-#define			AT91_TC_TC0XC0S_TIOA1		(2 << 0)
-#define			AT91_TC_TC0XC0S_TIOA2		(3 << 0)
-#define		AT91_TC_TC1XC1S		(3 << 2)	/* External Clock Signal 1 Selection */
-#define			AT91_TC_TC1XC1S_TCLK1		(0 << 2)
-#define			AT91_TC_TC1XC1S_NONE		(1 << 2)
-#define			AT91_TC_TC1XC1S_TIOA0		(2 << 2)
-#define			AT91_TC_TC1XC1S_TIOA2		(3 << 2)
-#define		AT91_TC_TC2XC2S		(3 << 4)	/* External Clock Signal 2 Selection */
-#define			AT91_TC_TC2XC2S_TCLK2		(0 << 4)
-#define			AT91_TC_TC2XC2S_NONE		(1 << 4)
-#define			AT91_TC_TC2XC2S_TIOA0		(2 << 4)
-#define			AT91_TC_TC2XC2S_TIOA1		(3 << 4)
-
-
-#define AT91_TC_CCR		0x00		/* Channel Control Register */
-#define		AT91_TC_CLKEN		(1 << 0)	/* Counter Clock Enable Command */
-#define		AT91_TC_CLKDIS		(1 << 1)	/* Counter CLock Disable Command */
-#define		AT91_TC_SWTRG		(1 << 2)	/* Software Trigger Command */
-
-#define AT91_TC_CMR		0x04		/* Channel Mode Register */
-#define		AT91_TC_TCCLKS		(7 << 0)	/* Capture/Waveform Mode: Clock Selection */
-#define			AT91_TC_TIMER_CLOCK1		(0 << 0)
-#define			AT91_TC_TIMER_CLOCK2		(1 << 0)
-#define			AT91_TC_TIMER_CLOCK3		(2 << 0)
-#define			AT91_TC_TIMER_CLOCK4		(3 << 0)
-#define			AT91_TC_TIMER_CLOCK5		(4 << 0)
-#define			AT91_TC_XC0			(5 << 0)
-#define			AT91_TC_XC1			(6 << 0)
-#define			AT91_TC_XC2			(7 << 0)
-#define		AT91_TC_CLKI		(1 << 3)	/* Capture/Waveform Mode: Clock Invert */
-#define		AT91_TC_BURST		(3 << 4)	/* Capture/Waveform Mode: Burst Signal Selection */
-#define		AT91_TC_LDBSTOP		(1 << 6)	/* Capture Mode: Counter Clock Stopped with TB Loading */
-#define		AT91_TC_LDBDIS		(1 << 7)	/* Capture Mode: Counter Clock Disable with RB Loading */
-#define		AT91_TC_ETRGEDG		(3 << 8)	/* Capture Mode: External Trigger Edge Selection */
-#define		AT91_TC_ABETRG		(1 << 10)	/* Capture Mode: TIOA or TIOB External Trigger Selection */
-#define		AT91_TC_CPCTRG		(1 << 14)	/* Capture Mode: RC Compare Trigger Enable */
-#define		AT91_TC_WAVE		(1 << 15)	/* Capture/Waveform mode */
-#define		AT91_TC_LDRA		(3 << 16)	/* Capture Mode: RA Loading Selection */
-#define		AT91_TC_LDRB		(3 << 18)	/* Capture Mode: RB Loading Selection */
-
-#define		AT91_TC_CPCSTOP		(1 <<  6)	/* Waveform Mode: Counter Clock Stopped with RC Compare */
-#define		AT91_TC_CPCDIS		(1 <<  7)	/* Waveform Mode: Counter Clock Disable with RC Compare */
-#define		AT91_TC_EEVTEDG		(3 <<  8)	/* Waveform Mode: External Event Edge Selection */
-#define			AT91_TC_EEVTEDG_NONE		(0 << 8)
-#define			AT91_TC_EEVTEDG_RISING		(1 << 8)
-#define			AT91_TC_EEVTEDG_FALLING		(2 << 8)
-#define			AT91_TC_EEVTEDG_BOTH		(3 << 8)
-#define		AT91_TC_EEVT		(3 << 10)	/* Waveform Mode: External Event Selection */
-#define			AT91_TC_EEVT_TIOB		(0 << 10)
-#define			AT91_TC_EEVT_XC0		(1 << 10)
-#define			AT91_TC_EEVT_XC1		(2 << 10)
-#define			AT91_TC_EEVT_XC2		(3 << 10)
-#define		AT91_TC_ENETRG		(1 << 12)	/* Waveform Mode: External Event Trigger Enable */
-#define		AT91_TC_WAVESEL		(3 << 13)	/* Waveform Mode: Waveform Selection */
-#define			AT91_TC_WAVESEL_UP		(0 << 13)
-#define			AT91_TC_WAVESEL_UP_AUTO		(2 << 13)
-#define			AT91_TC_WAVESEL_UPDOWN		(1 << 13)
-#define			AT91_TC_WAVESEL_UPDOWN_AUTO	(3 << 13)
-#define		AT91_TC_ACPA		(3 << 16)	/* Waveform Mode: RA Compare Effect on TIOA */
-#define			AT91_TC_ACPA_NONE		(0 << 16)
-#define			AT91_TC_ACPA_SET		(1 << 16)
-#define			AT91_TC_ACPA_CLEAR		(2 << 16)
-#define			AT91_TC_ACPA_TOGGLE		(3 << 16)
-#define		AT91_TC_ACPC		(3 << 18)	/* Waveform Mode: RC Compre Effect on TIOA */
-#define			AT91_TC_ACPC_NONE		(0 << 18)
-#define			AT91_TC_ACPC_SET		(1 << 18)
-#define			AT91_TC_ACPC_CLEAR		(2 << 18)
-#define			AT91_TC_ACPC_TOGGLE		(3 << 18)
-#define		AT91_TC_AEEVT		(3 << 20)	/* Waveform Mode: External Event Effect on TIOA */
-#define			AT91_TC_AEEVT_NONE		(0 << 20)
-#define			AT91_TC_AEEVT_SET		(1 << 20)
-#define			AT91_TC_AEEVT_CLEAR		(2 << 20)
-#define			AT91_TC_AEEVT_TOGGLE		(3 << 20)
-#define		AT91_TC_ASWTRG		(3 << 22)	/* Waveform Mode: Software Trigger Effect on TIOA */
-#define			AT91_TC_ASWTRG_NONE		(0 << 22)
-#define			AT91_TC_ASWTRG_SET		(1 << 22)
-#define			AT91_TC_ASWTRG_CLEAR		(2 << 22)
-#define			AT91_TC_ASWTRG_TOGGLE		(3 << 22)
-#define		AT91_TC_BCPB		(3 << 24)	/* Waveform Mode: RB Compare Effect on TIOB */
-#define			AT91_TC_BCPB_NONE		(0 << 24)
-#define			AT91_TC_BCPB_SET		(1 << 24)
-#define			AT91_TC_BCPB_CLEAR		(2 << 24)
-#define			AT91_TC_BCPB_TOGGLE		(3 << 24)
-#define		AT91_TC_BCPC		(3 << 26)	/* Waveform Mode: RC Compare Effect on TIOB */
-#define			AT91_TC_BCPC_NONE		(0 << 26)
-#define			AT91_TC_BCPC_SET		(1 << 26)
-#define			AT91_TC_BCPC_CLEAR		(2 << 26)
-#define			AT91_TC_BCPC_TOGGLE		(3 << 26)
-#define		AT91_TC_BEEVT		(3 << 28)	/* Waveform Mode: External Event Effect on TIOB */
-#define			AT91_TC_BEEVT_NONE		(0 << 28)
-#define			AT91_TC_BEEVT_SET		(1 << 28)
-#define			AT91_TC_BEEVT_CLEAR		(2 << 28)
-#define			AT91_TC_BEEVT_TOGGLE		(3 << 28)
-#define		AT91_TC_BSWTRG		(3 << 30)	/* Waveform Mode: Software Trigger Effect on TIOB */
-#define			AT91_TC_BSWTRG_NONE		(0 << 30)
-#define			AT91_TC_BSWTRG_SET		(1 << 30)
-#define			AT91_TC_BSWTRG_CLEAR		(2 << 30)
-#define			AT91_TC_BSWTRG_TOGGLE		(3 << 30)
-
-#define AT91_TC_CV		0x10		/* Counter Value */
-#define AT91_TC_RA		0x14		/* Register A */
-#define AT91_TC_RB		0x18		/* Register B */
-#define AT91_TC_RC		0x1c		/* Register C */
-
-#define AT91_TC_SR		0x20		/* Status Register */
-#define		AT91_TC_COVFS		(1 <<  0)	/* Counter Overflow Status */
-#define		AT91_TC_LOVRS		(1 <<  1)	/* Load Overrun Status */
-#define		AT91_TC_CPAS		(1 <<  2)	/* RA Compare Status */
-#define		AT91_TC_CPBS		(1 <<  3)	/* RB Compare Status */
-#define		AT91_TC_CPCS		(1 <<  4)	/* RC Compare Status */
-#define		AT91_TC_LDRAS		(1 <<  5)	/* RA Loading Status */
-#define		AT91_TC_LDRBS		(1 <<  6)	/* RB Loading Status */
-#define		AT91_TC_ETRGS		(1 <<  7)	/* External Trigger Status */
-#define		AT91_TC_CLKSTA		(1 << 16)	/* Clock Enabling Status */
-#define		AT91_TC_MTIOA		(1 << 17)	/* TIOA Mirror */
-#define		AT91_TC_MTIOB		(1 << 18)	/* TIOB Mirror */
-
-#define AT91_TC_IER		0x24		/* Interrupt Enable Register */
-#define AT91_TC_IDR		0x28		/* Interrupt Disable Register */
-#define AT91_TC_IMR		0x2c		/* Interrupt Mask Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_twi.h b/include/asm-arm/arch-at91/at91_twi.h
deleted file mode 100644
index f9f2e3c..0000000
--- a/include/asm-arm/arch-at91/at91_twi.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_twi.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Two-wire Interface (TWI) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_TWI_H
-#define AT91_TWI_H
-
-#define	AT91_TWI_CR		0x00		/* Control Register */
-#define		AT91_TWI_START		(1 <<  0)	/* Send a Start Condition */
-#define		AT91_TWI_STOP		(1 <<  1)	/* Send a Stop Condition */
-#define		AT91_TWI_MSEN		(1 <<  2)	/* Master Transfer Enable */
-#define		AT91_TWI_MSDIS		(1 <<  3)	/* Master Transfer Disable */
-#define		AT91_TWI_SVEN		(1 <<  4)	/* Slave Transfer Enable [SAM9260 only] */
-#define		AT91_TWI_SVDIS		(1 <<  5)	/* Slave Transfer Disable [SAM9260 only] */
-#define		AT91_TWI_SWRST		(1 <<  7)	/* Software Reset */
-
-#define	AT91_TWI_MMR		0x04		/* Master Mode Register */
-#define		AT91_TWI_IADRSZ		(3    <<  8)	/* Internal Device Address Size */
-#define			AT91_TWI_IADRSZ_NO		(0 << 8)
-#define			AT91_TWI_IADRSZ_1		(1 << 8)
-#define			AT91_TWI_IADRSZ_2		(2 << 8)
-#define			AT91_TWI_IADRSZ_3		(3 << 8)
-#define		AT91_TWI_MREAD		(1    << 12)	/* Master Read Direction */
-#define		AT91_TWI_DADR		(0x7f << 16)	/* Device Address */
-
-#define	AT91_TWI_SMR		0x08		/* Slave Mode Register [SAM9260 only] */
-#define		AT91_TWI_SADR		(0x7f << 16)	/* Slave Address */
-
-#define	AT91_TWI_IADR		0x0c		/* Internal Address Register */
-
-#define	AT91_TWI_CWGR		0x10		/* Clock Waveform Generator Register */
-#define		AT91_TWI_CLDIV		(0xff <<  0)	/* Clock Low Divisor */
-#define		AT91_TWI_CHDIV		(0xff <<  8)	/* Clock High Divisor */
-#define		AT91_TWI_CKDIV		(7    << 16)	/* Clock Divider */
-
-#define	AT91_TWI_SR		0x20		/* Status Register */
-#define		AT91_TWI_TXCOMP		(1 <<  0)	/* Transmission Complete */
-#define		AT91_TWI_RXRDY		(1 <<  1)	/* Receive Holding Register Ready */
-#define		AT91_TWI_TXRDY		(1 <<  2)	/* Transmit Holding Register Ready */
-#define		AT91_TWI_SVREAD		(1 <<  3)	/* Slave Read [SAM9260 only] */
-#define		AT91_TWI_SVACC		(1 <<  4)	/* Slave Access [SAM9260 only] */
-#define		AT91_TWI_GACC		(1 <<  5)	/* General Call Access [SAM9260 only] */
-#define		AT91_TWI_OVRE		(1 <<  6)	/* Overrun Error [AT91RM9200 only] */
-#define		AT91_TWI_UNRE		(1 <<  7)	/* Underrun Error [AT91RM9200 only] */
-#define		AT91_TWI_NACK		(1 <<  8)	/* Not Acknowledged */
-#define		AT91_TWI_ARBLST		(1 <<  9)	/* Arbitration Lost [SAM9260 only] */
-#define		AT91_TWI_SCLWS		(1 << 10)	/* Clock Wait State [SAM9260 only] */
-#define		AT91_TWI_EOSACC		(1 << 11)	/* End of Slave Address [SAM9260 only] */
-
-#define	AT91_TWI_IER		0x24		/* Interrupt Enable Register */
-#define	AT91_TWI_IDR		0x28		/* Interrupt Disable Register */
-#define	AT91_TWI_IMR		0x2c		/* Interrupt Mask Register */
-#define	AT91_TWI_RHR		0x30		/* Receive Holding Register */
-#define	AT91_TWI_THR		0x34		/* Transmit Holding Register */
-
-#endif
-
diff --git a/include/asm-arm/arch-at91/at91_wdt.h b/include/asm-arm/arch-at91/at91_wdt.h
deleted file mode 100644
index 1014e9b..0000000
--- a/include/asm-arm/arch-at91/at91_wdt.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_wdt.h
- *
- * Watchdog Timer (WDT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_WDT_H
-#define AT91_WDT_H
-
-#define AT91_WDT_CR		(AT91_WDT + 0x00)	/* Watchdog Control Register */
-#define		AT91_WDT_WDRSTT		(1    << 0)		/* Restart */
-#define		AT91_WDT_KEY		(0xa5 << 24)		/* KEY Password */
-
-#define AT91_WDT_MR		(AT91_WDT + 0x04)	/* Watchdog Mode Register */
-#define		AT91_WDT_WDV		(0xfff << 0)		/* Counter Value */
-#define		AT91_WDT_WDFIEN		(1     << 12)		/* Fault Interrupt Enable */
-#define		AT91_WDT_WDRSTEN	(1     << 13)		/* Reset Processor */
-#define		AT91_WDT_WDRPROC	(1     << 14)		/* Timer Restart */
-#define		AT91_WDT_WDDIS		(1     << 15)		/* Watchdog Disable */
-#define		AT91_WDT_WDD		(0xfff << 16)		/* Delta Value */
-#define		AT91_WDT_WDDBGHLT	(1     << 28)		/* Debug Halt */
-#define		AT91_WDT_WDIDLEHLT	(1     << 29)		/* Idle Halt */
-
-#define AT91_WDT_SR		(AT91_WDT + 0x08)	/* Watchdog Status Register */
-#define		AT91_WDT_WDUNF		(1 << 0)		/* Watchdog Underflow */
-#define		AT91_WDT_WDERR		(1 << 1)		/* Watchdog Error */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91cap9.h b/include/asm-arm/arch-at91/at91cap9.h
deleted file mode 100644
index 6f14d90..0000000
--- a/include/asm-arm/arch-at91/at91cap9.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91cap9.h
- *
- *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- *  Copyright (C) 2007 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91CAP9 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_H
-#define AT91CAP9_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
-#define AT91CAP9_ID_PIOABCD	2	/* Parallel IO Controller A, B, C and D */
-#define AT91CAP9_ID_MPB0	3	/* MP Block Peripheral 0 */
-#define AT91CAP9_ID_MPB1	4	/* MP Block Peripheral 1 */
-#define AT91CAP9_ID_MPB2	5	/* MP Block Peripheral 2 */
-#define AT91CAP9_ID_MPB3	6	/* MP Block Peripheral 3 */
-#define AT91CAP9_ID_MPB4	7	/* MP Block Peripheral 4 */
-#define AT91CAP9_ID_US0		8	/* USART 0 */
-#define AT91CAP9_ID_US1		9	/* USART 1 */
-#define AT91CAP9_ID_US2		10	/* USART 2 */
-#define AT91CAP9_ID_MCI0	11	/* Multimedia Card Interface 0 */
-#define AT91CAP9_ID_MCI1	12	/* Multimedia Card Interface 1 */
-#define AT91CAP9_ID_CAN		13	/* CAN */
-#define AT91CAP9_ID_TWI		14	/* Two-Wire Interface */
-#define AT91CAP9_ID_SPI0	15	/* Serial Peripheral Interface 0 */
-#define AT91CAP9_ID_SPI1	16	/* Serial Peripheral Interface 0 */
-#define AT91CAP9_ID_SSC0	17	/* Serial Synchronous Controller 0 */
-#define AT91CAP9_ID_SSC1	18	/* Serial Synchronous Controller 1 */
-#define AT91CAP9_ID_AC97C	19	/* AC97 Controller */
-#define AT91CAP9_ID_TCB		20	/* Timer Counter 0, 1 and 2 */
-#define AT91CAP9_ID_PWMC	21	/* Pulse Width Modulation Controller */
-#define AT91CAP9_ID_EMAC	22	/* Ethernet */
-#define AT91CAP9_ID_AESTDES	23	/* Advanced Encryption Standard, Triple DES */
-#define AT91CAP9_ID_ADC		24	/* Analog-to-Digital Converter */
-#define AT91CAP9_ID_ISI		25	/* Image Sensor Interface */
-#define AT91CAP9_ID_LCDC	26	/* LCD Controller */
-#define AT91CAP9_ID_DMA		27	/* DMA Controller */
-#define AT91CAP9_ID_UDPHS	28	/* USB High Speed Device Port */
-#define AT91CAP9_ID_UHP		29	/* USB Host Port */
-#define AT91CAP9_ID_IRQ0	30	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91CAP9_ID_IRQ1	31	/* Advanced Interrupt Controller (IRQ1) */
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91CAP9_BASE_UDPHS		0xfff78000
-#define AT91CAP9_BASE_TCB0		0xfff7c000
-#define AT91CAP9_BASE_TC0		0xfff7c000
-#define AT91CAP9_BASE_TC1		0xfff7c040
-#define AT91CAP9_BASE_TC2		0xfff7c080
-#define AT91CAP9_BASE_MCI0		0xfff80000
-#define AT91CAP9_BASE_MCI1		0xfff84000
-#define AT91CAP9_BASE_TWI		0xfff88000
-#define AT91CAP9_BASE_US0		0xfff8c000
-#define AT91CAP9_BASE_US1		0xfff90000
-#define AT91CAP9_BASE_US2		0xfff94000
-#define AT91CAP9_BASE_SSC0		0xfff98000
-#define AT91CAP9_BASE_SSC1		0xfff9c000
-#define AT91CAP9_BASE_AC97C		0xfffa0000
-#define AT91CAP9_BASE_SPI0		0xfffa4000
-#define AT91CAP9_BASE_SPI1		0xfffa8000
-#define AT91CAP9_BASE_CAN		0xfffac000
-#define AT91CAP9_BASE_PWMC		0xfffb8000
-#define AT91CAP9_BASE_EMAC		0xfffbc000
-#define AT91CAP9_BASE_ADC		0xfffc0000
-#define AT91CAP9_BASE_ISI		0xfffc4000
-#define AT91_BASE_SYS			0xffffe200
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_ECC	(0xffffe200 - AT91_BASE_SYS)
-#define AT91_BCRAMC	(0xffffe400 - AT91_BASE_SYS)
-#define AT91_DDRSDRC	(0xffffe600 - AT91_BASE_SYS)
-#define AT91_SMC	(0xffffe800 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_CCFG	(0xffffeb10 - AT91_BASE_SYS)
-#define AT91_DMA	(0xffffec00 - AT91_BASE_SYS)
-#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
-#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
-#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
-
-#define AT91_USART0	AT91CAP9_BASE_US0
-#define AT91_USART1	AT91CAP9_BASE_US1
-#define AT91_USART2	AT91CAP9_BASE_US2
-
-
-/*
- * Internal Memory.
- */
-#define AT91CAP9_SRAM_BASE	0x00100000	/* Internal SRAM base address */
-#define AT91CAP9_SRAM_SIZE	(32 * SZ_1K)	/* Internal SRAM size (32Kb) */
-
-#define AT91CAP9_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT91CAP9_ROM_SIZE	(32 * SZ_1K)	/* Internal ROM size (32Kb) */
-
-#define AT91CAP9_LCDC_BASE	0x00500000	/* LCD Controller */
-#define AT91CAP9_UDPHS_FIFO	0x00600000	/* USB High Speed Device Port */
-#define AT91CAP9_UHP_BASE	0x00700000	/* USB Host controller */
-
-#define CONFIG_DRAM_BASE	AT91_CHIPSELECT_6
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91cap9_ddrsdr.h b/include/asm-arm/arch-at91/at91cap9_ddrsdr.h
deleted file mode 100644
index efdb23a..0000000
--- a/include/asm-arm/arch-at91/at91cap9_ddrsdr.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91cap9_ddrsdr.h
- *
- * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
- * Based on AT91CAP9 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_DDRSDR_H
-#define AT91CAP9_DDRSDR_H
-
-#define AT91_DDRSDRC_MR		(AT91_DDRSDRC + 0x00)	/* Mode Register */
-#define		AT91_DDRSDRC_MODE	(0xf << 0)		/* Command Mode */
-#define			AT91_DDRSDRC_MODE_NORMAL		0
-#define			AT91_DDRSDRC_MODE_NOP		1
-#define			AT91_DDRSDRC_MODE_PRECHARGE	2
-#define			AT91_DDRSDRC_MODE_LMR		3
-#define			AT91_DDRSDRC_MODE_REFRESH	4
-#define			AT91_DDRSDRC_MODE_EXT_LMR	5
-#define			AT91_DDRSDRC_MODE_DEEP		6
-
-#define AT91_DDRSDRC_RTR	(AT91_DDRSDRC + 0x04)	/* Refresh Timer Register */
-#define		AT91_DDRSDRC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
-
-#define AT91_DDRSDRC_CR		(AT91_DDRSDRC + 0x08)	/* Configuration Register */
-#define		AT91_DDRSDRC_NC		(3 << 0)		/* Number of Column Bits */
-#define			AT91_DDRSDRC_NC_SDR8	(0 << 0)
-#define			AT91_DDRSDRC_NC_SDR9	(1 << 0)
-#define			AT91_DDRSDRC_NC_SDR10	(2 << 0)
-#define			AT91_DDRSDRC_NC_SDR11	(3 << 0)
-#define			AT91_DDRSDRC_NC_DDR9	(0 << 0)
-#define			AT91_DDRSDRC_NC_DDR10	(1 << 0)
-#define			AT91_DDRSDRC_NC_DDR11	(2 << 0)
-#define			AT91_DDRSDRC_NC_DDR12	(3 << 0)
-#define		AT91_DDRSDRC_NR		(3 << 2)		/* Number of Row Bits */
-#define			AT91_DDRSDRC_NR_11	(0 << 2)
-#define			AT91_DDRSDRC_NR_12	(1 << 2)
-#define			AT91_DDRSDRC_NR_13	(2 << 2)
-#define		AT91_DDRSDRC_CAS	(7 << 4)		/* CAS Latency */
-#define			AT91_DDRSDRC_CAS_2	(2 << 4)
-#define			AT91_DDRSDRC_CAS_3	(3 << 4)
-#define			AT91_DDRSDRC_CAS_25	(6 << 4)
-#define		AT91_DDRSDRC_DLL	(1 << 7)		/* Reset DLL */
-#define		AT91_DDRSDRC_DICDS	(1 << 8)		/* Output impedance control */
-
-#define AT91_DDRSDRC_T0PR	(AT91_DDRSDRC + 0x0C)	/* Timing 0 Register */
-#define		AT91_DDRSDRC_TRAS	(0xf <<  0)		/* Active to Precharge delay */
-#define		AT91_DDRSDRC_TRCD	(0xf <<  4)		/* Row to Column delay */
-#define		AT91_DDRSDRC_TWR	(0xf <<  8)		/* Write recovery delay */
-#define		AT91_DDRSDRC_TRC	(0xf << 12)		/* Row cycle delay */
-#define		AT91_DDRSDRC_TRP	(0xf << 16)		/* Row precharge delay */
-#define		AT91_DDRSDRC_TRRD	(0xf << 20)		/* Active BankA to BankB */
-#define		AT91_DDRSDRC_TWTR	(1   << 24)		/* Internal Write to Read delay */
-#define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */
-
-#define AT91_DDRSDRC_T1PR	(AT91_DDRSDRC + 0x10)	/* Timing 1 Register */
-#define		AT91_DDRSDRC_TRFC	(0x1f << 0)		/* Row Cycle Delay */
-#define		AT91_DDRSDRC_TXSNR	(0xff << 8)		/* Exit self-refresh to non-read */
-#define		AT91_DDRSDRC_TXSRD	(0xff << 16)		/* Exit self-refresh to read */
-#define		AT91_DDRSDRC_TXP	(0xf  << 24)		/* Exit power-down delay */
-
-#define AT91_DDRSDRC_LPR	(AT91_DDRSDRC + 0x18)	/* Low Power Register */
-#define		AT91_DDRSDRC_LPCB		(3 << 0)	/* Low-power Configurations */
-#define			AT91_DDRSDRC_LPCB_DISABLE		0
-#define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
-#define			AT91_DDRSDRC_LPCB_POWER_DOWN		2
-#define			AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN	3
-#define		AT91_DDRSDRC_CLKFR		(1 << 2)	/* Clock Frozen */
-#define		AT91_DDRSDRC_PASR		(7 << 4)	/* Partial Array Self Refresh */
-#define		AT91_DDRSDRC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
-#define		AT91_DDRSDRC_DS			(3 << 10)	/* Drive Strength */
-#define		AT91_DDRSDRC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
-#define			AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
-#define			AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
-#define			AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
-
-#define AT91_DDRSDRC_MDR	(AT91_DDRSDRC + 0x1C)	/* Memory Device Register */
-#define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
-#define			AT91_DDRSDRC_MD_SDR		0
-#define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
-#define			AT91_DDRSDRC_MD_DDR		2
-#define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
-
-#define AT91_DDRSDRC_DLLR	(AT91_DDRSDRC + 0x20)	/* DLL Information Register */
-#define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
-#define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
-#define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
-#define		AT91_DDRSDRC_SDCOVF	(1 << 3)		/* Slave Delay Correction Overflow */
-#define		AT91_DDRSDRC_SDCUDF	(1 << 4)		/* Slave Delay Correction Underflow */
-#define		AT91_DDRSDRC_SDERF	(1 << 5)		/* Slave Delay Correction error */
-#define		AT91_DDRSDRC_MDVAL	(0xff <<  8)		/* Master Delay value */
-#define		AT91_DDRSDRC_SDVAL	(0xff << 16)		/* Slave Delay value */
-#define		AT91_DDRSDRC_SDCVAL	(0xff << 24)		/* Slave Delay Correction value */
-
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91cap9_matrix.h b/include/asm-arm/arch-at91/at91cap9_matrix.h
deleted file mode 100644
index ddbd487..0000000
--- a/include/asm-arm/arch-at91/at91cap9_matrix.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91cap9_matrix.h
- *
- *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- *  Copyright (C) 2006 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91CAP9 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_MATRIX_H
-#define AT91CAP9_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
-#define AT91_MATRIX_MCFG9	(AT91_MATRIX + 0x24)	/* Master Configuration Register 9 */
-#define AT91_MATRIX_MCFG10	(AT91_MATRIX + 0x28)	/* Master Configuration Register 10 */
-#define AT91_MATRIX_MCFG11	(AT91_MATRIX + 0x2C)	/* Master Configuration Register 11 */
-#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
-#define AT91_MATRIX_SCFG8	(AT91_MATRIX + 0x60)	/* Slave Configuration Register 8 */
-#define AT91_MATRIX_SCFG9	(AT91_MATRIX + 0x64)	/* Slave Configuration Register 9 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
-#define AT91_MATRIX_PRAS8	(AT91_MATRIX + 0xC0)	/* Priority Register A for Slave 8 */
-#define AT91_MATRIX_PRBS8	(AT91_MATRIX + 0xC4)	/* Priority Register B for Slave 8 */
-#define AT91_MATRIX_PRAS9	(AT91_MATRIX + 0xC8)	/* Priority Register A for Slave 9 */
-#define AT91_MATRIX_PRBS9	(AT91_MATRIX + 0xCC)	/* Priority Register B for Slave 9 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
-#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
-#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
-#define		AT91_MATRIX_M9PR		(3 << 4)	/* Master 9 Priority (in Register B) */
-#define		AT91_MATRIX_M10PR		(3 << 8)	/* Master 10 Priority (in Register B) */
-#define		AT91_MATRIX_M11PR		(3 << 12)	/* Master 11 Priority (in Register B) */
-
-#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define		AT91_MATRIX_RCB2		(1 << 2)
-#define		AT91_MATRIX_RCB3		(1 << 3)
-#define		AT91_MATRIX_RCB4		(1 << 4)
-#define		AT91_MATRIX_RCB5		(1 << 5)
-#define		AT91_MATRIX_RCB6		(1 << 6)
-#define		AT91_MATRIX_RCB7		(1 << 7)
-#define		AT91_MATRIX_RCB8		(1 << 8)
-#define		AT91_MATRIX_RCB9		(1 << 9)
-#define		AT91_MATRIX_RCB10		(1 << 10)
-#define		AT91_MATRIX_RCB11		(1 << 11)
-
-#define AT91_MPBS0_SFR		(AT91_MATRIX + 0x114)	/* MPBlock Slave 0 Special Function Register */
-#define AT91_MPBS1_SFR		(AT91_MATRIX + 0x11C)	/* MPBlock Slave 1 Special Function Register */
-
-#define AT91_MATRIX_UDPHS	(AT91_MATRIX + 0x118)	/* USBHS Special Function Register [AT91CAP9 only] */
-#define		AT91_MATRIX_SELECT_UDPHS	(0 << 31)	/* select High Speed UDP */
-#define		AT91_MATRIX_SELECT_UDP		(1 << 31)	/* select standard UDP */
-#define		AT91_MATRIX_UDPHS_BYPASS_LOCK	(1 << 30)	/* bypass lock bit */
-
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_EBI_CS1A_BCRAMC		(1 << 1)
-#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_EBI_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_EBI_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_EBI_CS4A_SMC_CF1		(1 << 4)
-#define		AT91_MATRIX_EBI_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_EBI_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_EBI_CS5A_SMC_CF2		(1 << 5)
-#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_EBI_DQSPDC		(1 << 9)	/* Data Qualifier Strobe Pull-Down Configuration */
-#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
-#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
-
-#define AT91_MPBS2_SFR		(AT91_MATRIX + 0x12C)	/* MPBlock Slave 2 Special Function Register */
-#define AT91_MPBS3_SFR		(AT91_MATRIX + 0x130)	/* MPBlock Slave 3 Special Function Register */
-#define AT91_APB_SFR		(AT91_MATRIX + 0x134)	/* APB Bridge Special Function Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91rm9200.h b/include/asm-arm/arch-at91/at91rm9200.h
deleted file mode 100644
index e8fc0b1..0000000
--- a/include/asm-arm/arch-at91/at91rm9200.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91rm9200.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Common definitions.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_H
-#define AT91RM9200_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripheral */
-#define AT91RM9200_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91RM9200_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91RM9200_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91RM9200_ID_PIOD	5	/* Parallel IO Controller D */
-#define AT91RM9200_ID_US0	6	/* USART 0 */
-#define AT91RM9200_ID_US1	7	/* USART 1 */
-#define AT91RM9200_ID_US2	8	/* USART 2 */
-#define AT91RM9200_ID_US3	9	/* USART 3 */
-#define AT91RM9200_ID_MCI	10	/* Multimedia Card Interface */
-#define AT91RM9200_ID_UDP	11	/* USB Device Port */
-#define AT91RM9200_ID_TWI	12	/* Two-Wire Interface */
-#define AT91RM9200_ID_SPI	13	/* Serial Peripheral Interface */
-#define AT91RM9200_ID_SSC0	14	/* Serial Synchronous Controller 0 */
-#define AT91RM9200_ID_SSC1	15	/* Serial Synchronous Controller 1 */
-#define AT91RM9200_ID_SSC2	16	/* Serial Synchronous Controller 2 */
-#define AT91RM9200_ID_TC0	17	/* Timer Counter 0 */
-#define AT91RM9200_ID_TC1	18	/* Timer Counter 1 */
-#define AT91RM9200_ID_TC2	19	/* Timer Counter 2 */
-#define AT91RM9200_ID_TC3	20	/* Timer Counter 3 */
-#define AT91RM9200_ID_TC4	21	/* Timer Counter 4 */
-#define AT91RM9200_ID_TC5	22	/* Timer Counter 5 */
-#define AT91RM9200_ID_UHP	23	/* USB Host port */
-#define AT91RM9200_ID_EMAC	24	/* Ethernet MAC */
-#define AT91RM9200_ID_IRQ0	25	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91RM9200_ID_IRQ1	26	/* Advanced Interrupt Controller (IRQ1) */
-#define AT91RM9200_ID_IRQ2	27	/* Advanced Interrupt Controller (IRQ2) */
-#define AT91RM9200_ID_IRQ3	28	/* Advanced Interrupt Controller (IRQ3) */
-#define AT91RM9200_ID_IRQ4	29	/* Advanced Interrupt Controller (IRQ4) */
-#define AT91RM9200_ID_IRQ5	30	/* Advanced Interrupt Controller (IRQ5) */
-#define AT91RM9200_ID_IRQ6	31	/* Advanced Interrupt Controller (IRQ6) */
-
-
-/*
- * Peripheral physical base addresses.
- */
-#define AT91RM9200_BASE_TCB0	0xfffa0000
-#define AT91RM9200_BASE_TC0	0xfffa0000
-#define AT91RM9200_BASE_TC1	0xfffa0040
-#define AT91RM9200_BASE_TC2	0xfffa0080
-#define AT91RM9200_BASE_TCB1	0xfffa4000
-#define AT91RM9200_BASE_TC3	0xfffa4000
-#define AT91RM9200_BASE_TC4	0xfffa4040
-#define AT91RM9200_BASE_TC5	0xfffa4080
-#define AT91RM9200_BASE_UDP	0xfffb0000
-#define AT91RM9200_BASE_MCI	0xfffb4000
-#define AT91RM9200_BASE_TWI	0xfffb8000
-#define AT91RM9200_BASE_EMAC	0xfffbc000
-#define AT91RM9200_BASE_US0	0xfffc0000
-#define AT91RM9200_BASE_US1	0xfffc4000
-#define AT91RM9200_BASE_US2	0xfffc8000
-#define AT91RM9200_BASE_US3	0xfffcc000
-#define AT91RM9200_BASE_SSC0	0xfffd0000
-#define AT91RM9200_BASE_SSC1	0xfffd4000
-#define AT91RM9200_BASE_SSC2	0xfffd8000
-#define AT91RM9200_BASE_SPI	0xfffe0000
-#define AT91_BASE_SYS		0xfffff000
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)	/* Advanced Interrupt Controller */
-#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)	/* Debug Unit */
-#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)	/* PIO Controller A */
-#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)	/* PIO Controller B */
-#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)	/* PIO Controller C */
-#define AT91_PIOD	(0xfffffa00 - AT91_BASE_SYS)	/* PIO Controller D */
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)	/* Power Management Controller */
-#define AT91_ST		(0xfffffd00 - AT91_BASE_SYS)	/* System Timer */
-#define AT91_RTC	(0xfffffe00 - AT91_BASE_SYS)	/* Real-Time Clock */
-#define AT91_MC		(0xffffff00 - AT91_BASE_SYS)	/* Memory Controllers */
-
-#define AT91_USART0	AT91RM9200_BASE_US0
-#define AT91_USART1	AT91RM9200_BASE_US1
-#define AT91_USART2	AT91RM9200_BASE_US2
-#define AT91_USART3	AT91RM9200_BASE_US3
-
-#define AT91_MATRIX	0	/* not supported */
-
-/*
- * Internal Memory.
- */
-#define AT91RM9200_ROM_BASE	0x00100000	/* Internal ROM base address */
-#define AT91RM9200_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
-
-#define AT91RM9200_SRAM_BASE	0x00200000	/* Internal SRAM base address */
-#define AT91RM9200_SRAM_SIZE	SZ_16K		/* Internal SRAM size (16Kb) */
-
-#define AT91RM9200_UHP_BASE	0x00300000	/* USB Host controller */
-
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91rm9200_emac.h b/include/asm-arm/arch-at91/at91rm9200_emac.h
deleted file mode 100644
index 0c417af..0000000
--- a/include/asm-arm/arch-at91/at91rm9200_emac.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91rm9200_emac.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Ethernet MAC registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_EMAC_H
-#define AT91RM9200_EMAC_H
-
-#define	AT91_EMAC_CTL		0x00	/* Control Register */
-#define		AT91_EMAC_LB		(1 <<  0)	/* Loopback */
-#define		AT91_EMAC_LBL		(1 <<  1)	/* Loopback Local */
-#define		AT91_EMAC_RE		(1 <<  2)	/* Receive Enable */
-#define		AT91_EMAC_TE		(1 <<  3)	/* Transmit Enable */
-#define		AT91_EMAC_MPE		(1 <<  4)	/* Management Port Enable */
-#define		AT91_EMAC_CSR		(1 <<  5)	/* Clear Statistics Registers */
-#define		AT91_EMAC_INCSTAT	(1 <<  6)	/* Increment Statistics Registers */
-#define		AT91_EMAC_WES		(1 <<  7)	/* Write Enable for Statistics Registers */
-#define		AT91_EMAC_BP		(1 <<  8)	/* Back Pressure */
-
-#define	AT91_EMAC_CFG		0x04	/* Configuration Register */
-#define		AT91_EMAC_SPD		(1 <<  0)	/* Speed */
-#define		AT91_EMAC_FD		(1 <<  1)	/* Full Duplex */
-#define		AT91_EMAC_BR		(1 <<  2)	/* Bit Rate */
-#define		AT91_EMAC_CAF		(1 <<  4)	/* Copy All Frames */
-#define		AT91_EMAC_NBC		(1 <<  5)	/* No Broadcast */
-#define		AT91_EMAC_MTI		(1 <<  6)	/* Multicast Hash Enable */
-#define		AT91_EMAC_UNI		(1 <<  7)	/* Unicast Hash Enable */
-#define		AT91_EMAC_BIG		(1 <<  8)	/* Receive 1522 Bytes */
-#define		AT91_EMAC_EAE		(1 <<  9)	/* External Address Match Enable */
-#define		AT91_EMAC_CLK		(3 << 10)	/* MDC Clock Divisor */
-#define		AT91_EMAC_CLK_DIV8		(0 << 10)
-#define		AT91_EMAC_CLK_DIV16		(1 << 10)
-#define		AT91_EMAC_CLK_DIV32		(2 << 10)
-#define		AT91_EMAC_CLK_DIV64		(3 << 10)
-#define		AT91_EMAC_RTY		(1 << 12)	/* Retry Test */
-#define		AT91_EMAC_RMII		(1 << 13)	/* Reduce MII (RMII) */
-
-#define	AT91_EMAC_SR		0x08	/* Status Register */
-#define		AT91_EMAC_SR_LINK	(1 <<  0)	/* Link */
-#define		AT91_EMAC_SR_MDIO	(1 <<  1)	/* MDIO pin */
-#define		AT91_EMAC_SR_IDLE	(1 <<  2)	/* PHY idle */
-
-#define	AT91_EMAC_TAR		0x0c	/* Transmit Address Register */
-
-#define	AT91_EMAC_TCR		0x10	/* Transmit Control Register */
-#define		AT91_EMAC_LEN		(0x7ff << 0)	/* Transmit Frame Length */
-#define		AT91_EMAC_NCRC		(1     << 15)	/* No CRC */
-
-#define	AT91_EMAC_TSR		0x14	/* Transmit Status Register */
-#define		AT91_EMAC_TSR_OVR	(1 <<  0)	/* Transmit Buffer Overrun */
-#define		AT91_EMAC_TSR_COL	(1 <<  1)	/* Collision Occurred */
-#define		AT91_EMAC_TSR_RLE	(1 <<  2)	/* Retry Limit Exceeded */
-#define		AT91_EMAC_TSR_IDLE	(1 <<  3)	/* Transmitter Idle */
-#define		AT91_EMAC_TSR_BNQ	(1 <<  4)	/* Transmit Buffer not Queued */
-#define		AT91_EMAC_TSR_COMP	(1 <<  5)	/* Transmit Complete */
-#define		AT91_EMAC_TSR_UND	(1 <<  6)	/* Transmit Underrun */
-
-#define	AT91_EMAC_RBQP		0x18	/* Receive Buffer Queue Pointer */
-
-#define	AT91_EMAC_RSR		0x20	/* Receive Status Register */
-#define		AT91_EMAC_RSR_BNA	(1 <<  0)	/* Buffer Not Available */
-#define		AT91_EMAC_RSR_REC	(1 <<  1)	/* Frame Received */
-#define		AT91_EMAC_RSR_OVR	(1 <<  2)	/* RX Overrun */
-
-#define	AT91_EMAC_ISR		0x24	/* Interrupt Status Register */
-#define		AT91_EMAC_DONE		(1 <<  0)	/* Management Done */
-#define		AT91_EMAC_RCOM		(1 <<  1)	/* Receive Complete */
-#define		AT91_EMAC_RBNA		(1 <<  2)	/* Receive Buffer Not Available */
-#define		AT91_EMAC_TOVR		(1 <<  3)	/* Transmit Buffer Overrun */
-#define		AT91_EMAC_TUND		(1 <<  4)	/* Transmit Buffer Underrun */
-#define		AT91_EMAC_RTRY		(1 <<  5)	/* Retry Limit */
-#define		AT91_EMAC_TBRE		(1 <<  6)	/* Transmit Buffer Register Empty */
-#define		AT91_EMAC_TCOM		(1 <<  7)	/* Transmit Complete */
-#define		AT91_EMAC_TIDLE		(1 <<  8)	/* Transmit Idle */
-#define		AT91_EMAC_LINK		(1 <<  9)	/* Link */
-#define		AT91_EMAC_ROVR		(1 << 10)	/* RX Overrun */
-#define		AT91_EMAC_ABT		(1 << 11)	/* Abort */
-
-#define	AT91_EMAC_IER		0x28	/* Interrupt Enable Register */
-#define	AT91_EMAC_IDR		0x2c	/* Interrupt Disable Register */
-#define	AT91_EMAC_IMR		0x30	/* Interrupt Mask Register */
-
-#define	AT91_EMAC_MAN		0x34	/* PHY Maintenance Register */
-#define		AT91_EMAC_DATA		(0xffff << 0)	/* MDIO Data */
-#define		AT91_EMAC_REGA		(0x1f	<< 18)	/* MDIO Register */
-#define		AT91_EMAC_PHYA		(0x1f	<< 23)	/* MDIO PHY Address */
-#define		AT91_EMAC_RW		(3	<< 28)	/* Read/Write operation */
-#define			AT91_EMAC_RW_W		(1 << 28)
-#define			AT91_EMAC_RW_R		(2 << 28)
-#define		AT91_EMAC_MAN_802_3	0x40020000	/* IEEE 802.3 value */
-
-/*
- * Statistics Registers.
- */
-#define AT91_EMAC_FRA		0x40	/* Frames Transmitted OK */
-#define AT91_EMAC_SCOL		0x44	/* Single Collision Frame */
-#define AT91_EMAC_MCOL		0x48	/* Multiple Collision Frame */
-#define AT91_EMAC_OK		0x4c	/* Frames Received OK */
-#define AT91_EMAC_SEQE		0x50	/* Frame Check Sequence Error */
-#define AT91_EMAC_ALE		0x54	/* Alignmemt Error */
-#define AT91_EMAC_DTE		0x58	/* Deffered Transmission Frame */
-#define AT91_EMAC_LCOL		0x5c	/* Late Collision */
-#define AT91_EMAC_ECOL		0x60	/* Excessive Collision */
-#define AT91_EMAC_TUE		0x64	/* Transmit Underrun Error */
-#define AT91_EMAC_CSE		0x68	/* Carrier Sense Error */
-#define AT91_EMAC_DRFC		0x6c	/* Discard RX Frame */
-#define AT91_EMAC_ROV		0x70	/* Receive Overrun */
-#define AT91_EMAC_CDE		0x74	/* Code Error */
-#define AT91_EMAC_ELR		0x78	/* Excessive Length Error */
-#define AT91_EMAC_RJB		0x7c	/* Receive Jabber */
-#define AT91_EMAC_USF		0x80	/* Undersize Frame */
-#define AT91_EMAC_SQEE		0x84	/* SQE Test Error */
-
-/*
- * Address Registers.
- */
-#define AT91_EMAC_HSL		0x90	/* Hash Address Low [31:0] */
-#define AT91_EMAC_HSH		0x94	/* Hash Address High [63:32] */
-#define AT91_EMAC_SA1L		0x98	/* Specific Address 1 Low, bytes 0-3 */
-#define AT91_EMAC_SA1H		0x9c	/* Specific Address 1 High, bytes 4-5 */
-#define AT91_EMAC_SA2L		0xa0	/* Specific Address 2 Low, bytes 0-3 */
-#define AT91_EMAC_SA2H		0xa4	/* Specific Address 2 High, bytes 4-5 */
-#define AT91_EMAC_SA3L		0xa8	/* Specific Address 3 Low, bytes 0-3 */
-#define AT91_EMAC_SA3H		0xac	/* Specific Address 3 High, bytes 4-5 */
-#define AT91_EMAC_SA4L		0xb0	/* Specific Address 4 Low, bytes 0-3 */
-#define AT91_EMAC_SA4H		0xb4	/* Specific Address 4 High, bytes 4-5 */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91rm9200_mc.h b/include/asm-arm/arch-at91/at91rm9200_mc.h
deleted file mode 100644
index 24d0129..0000000
--- a/include/asm-arm/arch-at91/at91rm9200_mc.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91rm9200_mc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_MC_H
-#define AT91RM9200_MC_H
-
-/* Memory Controller */
-#define AT91_MC_RCR		(AT91_MC + 0x00)	/* MC Remap Control Register */
-#define		AT91_MC_RCB		(1 <<  0)		/* Remap Command Bit */
-
-#define AT91_MC_ASR		(AT91_MC + 0x04)	/* MC Abort Status Register */
-#define		AT91_MC_UNADD		(1 <<  0)		/* Undefined Address Abort Status */
-#define		AT91_MC_MISADD		(1 <<  1)		/* Misaligned Address Abort Status */
-#define		AT91_MC_ABTSZ		(3 <<  8)		/* Abort Size Status */
-#define			AT91_MC_ABTSZ_BYTE		(0 << 8)
-#define			AT91_MC_ABTSZ_HALFWORD		(1 << 8)
-#define			AT91_MC_ABTSZ_WORD		(2 << 8)
-#define		AT91_MC_ABTTYP		(3 << 10)		/* Abort Type Status */
-#define			AT91_MC_ABTTYP_DATAREAD		(0 << 10)
-#define			AT91_MC_ABTTYP_DATAWRITE	(1 << 10)
-#define			AT91_MC_ABTTYP_FETCH		(2 << 10)
-#define		AT91_MC_MST0		(1 << 16)		/* ARM920T Abort Source */
-#define		AT91_MC_MST1		(1 << 17)		/* PDC Abort Source */
-#define		AT91_MC_MST2		(1 << 18)		/* UHP Abort Source */
-#define		AT91_MC_MST3		(1 << 19)		/* EMAC Abort Source */
-#define		AT91_MC_SVMST0		(1 << 24)		/* Saved ARM920T Abort Source */
-#define		AT91_MC_SVMST1		(1 << 25)		/* Saved PDC Abort Source */
-#define		AT91_MC_SVMST2		(1 << 26)		/* Saved UHP Abort Source */
-#define		AT91_MC_SVMST3		(1 << 27)		/* Saved EMAC Abort Source */
-
-#define AT91_MC_AASR		(AT91_MC + 0x08)	/* MC Abort Address Status Register */
-
-#define AT91_MC_MPR		(AT91_MC + 0x0c)	/* MC Master Priority Register */
-#define		AT91_MPR_MSTP0		(7 <<  0)		/* ARM920T Priority */
-#define		AT91_MPR_MSTP1		(7 <<  4)		/* PDC Priority */
-#define		AT91_MPR_MSTP2		(7 <<  8)		/* UHP Priority */
-#define		AT91_MPR_MSTP3		(7 << 12)		/* EMAC Priority */
-
-/* External Bus Interface (EBI) registers */
-#define AT91_EBI_CSA		(AT91_MC + 0x60)	/* Chip Select Assignment Register */
-#define		AT91_EBI_CS0A		(1 << 0)		/* Chip Select 0 Assignment */
-#define			AT91_EBI_CS0A_SMC		(0 << 0)
-#define			AT91_EBI_CS0A_BFC		(1 << 0)
-#define		AT91_EBI_CS1A		(1 << 1)		/* Chip Select 1 Assignment */
-#define			AT91_EBI_CS1A_SMC		(0 << 1)
-#define			AT91_EBI_CS1A_SDRAMC		(1 << 1)
-#define		AT91_EBI_CS3A		(1 << 3)		/* Chip Select 2 Assignment */
-#define			AT91_EBI_CS3A_SMC		(0 << 3)
-#define			AT91_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_EBI_CS4A		(1 << 4)		/* Chip Select 3 Assignment */
-#define			AT91_EBI_CS4A_SMC		(0 << 4)
-#define			AT91_EBI_CS4A_SMC_COMPACTFLASH	(1 << 4)
-#define AT91_EBI_CFGR		(AT91_MC + 0x64)	/* Configuration Register */
-#define		AT91_EBI_DBPUC		(1 << 0)		/* Data Bus Pull-Up Configuration */
-
-/* Static Memory Controller (SMC) registers */
-#define	AT91_SMC_CSR(n)		(AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */
-#define		AT91_SMC_NWS		(0x7f <<  0)		/* Number of Wait States */
-#define			AT91_SMC_NWS_(x)	((x) << 0)
-#define		AT91_SMC_WSEN		(1    <<  7)		/* Wait State Enable */
-#define		AT91_SMC_TDF		(0xf  <<  8)		/* Data Float Time */
-#define			AT91_SMC_TDF_(x)	((x) << 8)
-#define		AT91_SMC_BAT		(1    << 12)		/* Byte Access Type */
-#define		AT91_SMC_DBW		(3    << 13)		/* Data Bus Width */
-#define			AT91_SMC_DBW_16		(1 << 13)
-#define			AT91_SMC_DBW_8		(2 << 13)
-#define		AT91_SMC_DPR		(1 << 15)		/* Data Read Protocol */
-#define		AT91_SMC_ACSS		(3 << 16)		/* Address to Chip Select Setup */
-#define			AT91_SMC_ACSS_STD	(0 << 16)
-#define			AT91_SMC_ACSS_1		(1 << 16)
-#define			AT91_SMC_ACSS_2		(2 << 16)
-#define			AT91_SMC_ACSS_3		(3 << 16)
-#define		AT91_SMC_RWSETUP	(7 << 24)		/* Read & Write Signal Time Setup */
-#define			AT91_SMC_RWSETUP_(x)	((x) << 24)
-#define		AT91_SMC_RWHOLD		(7 << 28)		/* Read & Write Signal Hold Time */
-#define			AT91_SMC_RWHOLD_(x)	((x) << 28)
-
-/* SDRAM Controller registers */
-#define AT91_SDRAMC_MR		(AT91_MC + 0x90)	/* Mode Register */
-#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
-#define			AT91_SDRAMC_MODE_NORMAL		(0 << 0)
-#define			AT91_SDRAMC_MODE_NOP		(1 << 0)
-#define			AT91_SDRAMC_MODE_PRECHARGE	(2 << 0)
-#define			AT91_SDRAMC_MODE_LMR		(3 << 0)
-#define			AT91_SDRAMC_MODE_REFRESH	(4 << 0)
-#define		AT91_SDRAMC_DBW		(1   << 4)		/* Data Bus Width */
-#define			AT91_SDRAMC_DBW_32	(0 << 4)
-#define			AT91_SDRAMC_DBW_16	(1 << 4)
-
-#define AT91_SDRAMC_TR		(AT91_MC + 0x94)	/* Refresh Timer Register */
-#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Count */
-
-#define AT91_SDRAMC_CR		(AT91_MC + 0x98)	/* Configuration Register */
-#define		AT91_SDRAMC_NC		(3   <<  0)		/* Number of Column Bits */
-#define			AT91_SDRAMC_NC_8	(0 << 0)
-#define			AT91_SDRAMC_NC_9	(1 << 0)
-#define			AT91_SDRAMC_NC_10	(2 << 0)
-#define			AT91_SDRAMC_NC_11	(3 << 0)
-#define		AT91_SDRAMC_NR		(3   <<  2)		/* Number of Row Bits */
-#define			AT91_SDRAMC_NR_11	(0 << 2)
-#define			AT91_SDRAMC_NR_12	(1 << 2)
-#define			AT91_SDRAMC_NR_13	(2 << 2)
-#define		AT91_SDRAMC_NB		(1   <<  4)		/* Number of Banks */
-#define			AT91_SDRAMC_NB_2	(0 << 4)
-#define			AT91_SDRAMC_NB_4	(1 << 4)
-#define		AT91_SDRAMC_CAS		(3   <<  5)		/* CAS Latency */
-#define			AT91_SDRAMC_CAS_2	(2 << 5)
-#define		AT91_SDRAMC_TWR		(0xf <<  7)		/* Write Recovery Delay */
-#define		AT91_SDRAMC_TRC		(0xf << 11)		/* Row Cycle Delay */
-#define		AT91_SDRAMC_TRP		(0xf << 15)		/* Row Precharge Delay */
-#define		AT91_SDRAMC_TRCD	(0xf << 19)		/* Row to Column Delay */
-#define		AT91_SDRAMC_TRAS	(0xf << 23)		/* Active to Precharge Delay */
-#define		AT91_SDRAMC_TXSR	(0xf << 27)		/* Exit Self Refresh to Active Delay */
-
-#define AT91_SDRAMC_SRR		(AT91_MC + 0x9c)	/* Self Refresh Register */
-#define AT91_SDRAMC_LPR		(AT91_MC + 0xa0)	/* Low Power Register */
-#define AT91_SDRAMC_IER		(AT91_MC + 0xa4)	/* Interrupt Enable Register */
-#define AT91_SDRAMC_IDR		(AT91_MC + 0xa8)	/* Interrupt Disable Register */
-#define AT91_SDRAMC_IMR		(AT91_MC + 0xac)	/* Interrupt Mask Register */
-#define AT91_SDRAMC_ISR		(AT91_MC + 0xb0)	/* Interrupt Status Register */
-
-/* Burst Flash Controller register */
-#define AT91_BFC_MR		(AT91_MC + 0xc0)	/* Mode Register */
-#define		AT91_BFC_BFCOM		(3   <<  0)		/* Burst Flash Controller Operating Mode */
-#define			AT91_BFC_BFCOM_DISABLED	(0 << 0)
-#define			AT91_BFC_BFCOM_ASYNC	(1 << 0)
-#define			AT91_BFC_BFCOM_BURST	(2 << 0)
-#define		AT91_BFC_BFCC		(3   <<  2)		/* Burst Flash Controller Clock */
-#define			AT91_BFC_BFCC_MCK	(1 << 2)
-#define			AT91_BFC_BFCC_DIV2	(2 << 2)
-#define			AT91_BFC_BFCC_DIV4	(3 << 2)
-#define		AT91_BFC_AVL		(0xf <<  4)		/* Address Valid Latency */
-#define		AT91_BFC_PAGES		(7   <<  8)		/* Page Size */
-#define			AT91_BFC_PAGES_NO_PAGE	(0 << 8)
-#define			AT91_BFC_PAGES_16	(1 << 8)
-#define			AT91_BFC_PAGES_32	(2 << 8)
-#define			AT91_BFC_PAGES_64	(3 << 8)
-#define			AT91_BFC_PAGES_128	(4 << 8)
-#define			AT91_BFC_PAGES_256	(5 << 8)
-#define			AT91_BFC_PAGES_512	(6 << 8)
-#define			AT91_BFC_PAGES_1024	(7 << 8)
-#define		AT91_BFC_OEL		(3   << 12)		/* Output Enable Latency */
-#define		AT91_BFC_BAAEN		(1   << 16)		/* Burst Address Advance Enable */
-#define		AT91_BFC_BFOEH		(1   << 17)		/* Burst Flash Output Enable Handling */
-#define		AT91_BFC_MUXEN		(1   << 18)		/* Multiplexed Bus Enable */
-#define		AT91_BFC_RDYEN		(1   << 19)		/* Ready Enable Mode */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9260.h b/include/asm-arm/arch-at91/at91sam9260.h
deleted file mode 100644
index 889872a..0000000
--- a/include/asm-arm/arch-at91/at91sam9260.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9260.h
- *
- * (C) 2006 Andrew Victor
- *
- * Common definitions.
- * Based on AT91SAM9260 datasheet revision A (Preliminary).
- *
- * Includes also definitions for AT91SAM9XE and AT91SAM9G families
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9260_H
-#define AT91SAM9260_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
-#define AT91SAM9260_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91SAM9260_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91SAM9260_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91SAM9260_ID_ADC	5	/* Analog-to-Digital Converter */
-#define AT91SAM9260_ID_US0	6	/* USART 0 */
-#define AT91SAM9260_ID_US1	7	/* USART 1 */
-#define AT91SAM9260_ID_US2	8	/* USART 2 */
-#define AT91SAM9260_ID_MCI	9	/* Multimedia Card Interface */
-#define AT91SAM9260_ID_UDP	10	/* USB Device Port */
-#define AT91SAM9260_ID_TWI	11	/* Two-Wire Interface */
-#define AT91SAM9260_ID_SPI0	12	/* Serial Peripheral Interface 0 */
-#define AT91SAM9260_ID_SPI1	13	/* Serial Peripheral Interface 1 */
-#define AT91SAM9260_ID_SSC	14	/* Serial Synchronous Controller */
-#define AT91SAM9260_ID_TC0	17	/* Timer Counter 0 */
-#define AT91SAM9260_ID_TC1	18	/* Timer Counter 1 */
-#define AT91SAM9260_ID_TC2	19	/* Timer Counter 2 */
-#define AT91SAM9260_ID_UHP	20	/* USB Host port */
-#define AT91SAM9260_ID_EMAC	21	/* Ethernet */
-#define AT91SAM9260_ID_ISI	22	/* Image Sensor Interface */
-#define AT91SAM9260_ID_US3	23	/* USART 3 */
-#define AT91SAM9260_ID_US4	24	/* USART 4 */
-#define AT91SAM9260_ID_US5	25	/* USART 5 */
-#define AT91SAM9260_ID_TC3	26	/* Timer Counter 3 */
-#define AT91SAM9260_ID_TC4	27	/* Timer Counter 4 */
-#define AT91SAM9260_ID_TC5	28	/* Timer Counter 5 */
-#define AT91SAM9260_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9260_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
-#define AT91SAM9260_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9260_BASE_TCB0		0xfffa0000
-#define AT91SAM9260_BASE_TC0		0xfffa0000
-#define AT91SAM9260_BASE_TC1		0xfffa0040
-#define AT91SAM9260_BASE_TC2		0xfffa0080
-#define AT91SAM9260_BASE_UDP		0xfffa4000
-#define AT91SAM9260_BASE_MCI		0xfffa8000
-#define AT91SAM9260_BASE_TWI		0xfffac000
-#define AT91SAM9260_BASE_US0		0xfffb0000
-#define AT91SAM9260_BASE_US1		0xfffb4000
-#define AT91SAM9260_BASE_US2		0xfffb8000
-#define AT91SAM9260_BASE_SSC		0xfffbc000
-#define AT91SAM9260_BASE_ISI		0xfffc0000
-#define AT91SAM9260_BASE_EMAC		0xfffc4000
-#define AT91SAM9260_BASE_SPI0		0xfffc8000
-#define AT91SAM9260_BASE_SPI1		0xfffcc000
-#define AT91SAM9260_BASE_US3		0xfffd0000
-#define AT91SAM9260_BASE_US4		0xfffd4000
-#define AT91SAM9260_BASE_US5		0xfffd8000
-#define AT91SAM9260_BASE_TCB1		0xfffdc000
-#define AT91SAM9260_BASE_TC3		0xfffdc000
-#define AT91SAM9260_BASE_TC4		0xfffdc040
-#define AT91SAM9260_BASE_TC5		0xfffdc080
-#define AT91SAM9260_BASE_ADC		0xfffe0000
-#define AT91_BASE_SYS			0xffffe800
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
-#define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
-#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
-
-#define AT91_USART0	AT91SAM9260_BASE_US0
-#define AT91_USART1	AT91SAM9260_BASE_US1
-#define AT91_USART2	AT91SAM9260_BASE_US2
-#define AT91_USART3	AT91SAM9260_BASE_US3
-#define AT91_USART4	AT91SAM9260_BASE_US4
-#define AT91_USART5	AT91SAM9260_BASE_US5
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9260_ROM_BASE	0x00100000	/* Internal ROM base address */
-#define AT91SAM9260_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
-
-#define AT91SAM9260_SRAM0_BASE	0x00200000	/* Internal SRAM 0 base address */
-#define AT91SAM9260_SRAM0_SIZE	SZ_4K		/* Internal SRAM 0 size (4Kb) */
-#define AT91SAM9260_SRAM1_BASE	0x00300000	/* Internal SRAM 1 base address */
-#define AT91SAM9260_SRAM1_SIZE	SZ_4K		/* Internal SRAM 1 size (4Kb) */
-
-#define AT91SAM9260_UHP_BASE	0x00500000	/* USB Host controller */
-
-#define AT91SAM9XE_FLASH_BASE	0x00200000	/* Internal FLASH base address */
-#define AT91SAM9XE_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-
-#define AT91SAM9G20_ROM_BASE	0x00100000	/* Internal ROM base address */
-#define AT91SAM9G20_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
-
-#define AT91SAM9G20_SRAM0_BASE	0x00200000	/* Internal SRAM 0 base address */
-#define AT91SAM9G20_SRAM0_SIZE	SZ_16K		/* Internal SRAM 0 size (16Kb) */
-#define AT91SAM9G20_SRAM1_BASE	0x00300000	/* Internal SRAM 1 base address */
-#define AT91SAM9G20_SRAM1_SIZE	SZ_16K		/* Internal SRAM 1 size (16Kb) */
-
-#define AT91SAM9G20_UHP_BASE	0x00500000	/* USB Host controller */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9260_matrix.h b/include/asm-arm/arch-at91/at91sam9260_matrix.h
deleted file mode 100644
index a8e9fec..0000000
--- a/include/asm-arm/arch-at91/at91sam9260_matrix.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9260_matrix.h
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9260 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9260_MATRIX_H
-#define AT91SAM9260_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
-#define		AT91_MATRIX_ULBT		(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff <<  0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-
-#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x11C)	/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
-#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
-#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9261.h b/include/asm-arm/arch-at91/at91sam9261.h
deleted file mode 100644
index c7c4778..0000000
--- a/include/asm-arm/arch-at91/at91sam9261.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9261.h
- *
- * Copyright (C) SAN People
- *
- * Common definitions.
- * Based on AT91SAM9261 datasheet revision E. (Preliminary)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9261_H
-#define AT91SAM9261_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
-#define AT91SAM9261_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91SAM9261_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91SAM9261_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91SAM9261_ID_US0	6	/* USART 0 */
-#define AT91SAM9261_ID_US1	7	/* USART 1 */
-#define AT91SAM9261_ID_US2	8	/* USART 2 */
-#define AT91SAM9261_ID_MCI	9	/* Multimedia Card Interface */
-#define AT91SAM9261_ID_UDP	10	/* USB Device Port */
-#define AT91SAM9261_ID_TWI	11	/* Two-Wire Interface */
-#define AT91SAM9261_ID_SPI0	12	/* Serial Peripheral Interface 0 */
-#define AT91SAM9261_ID_SPI1	13	/* Serial Peripheral Interface 1 */
-#define AT91SAM9261_ID_SSC0	14	/* Serial Synchronous Controller 0 */
-#define AT91SAM9261_ID_SSC1	15	/* Serial Synchronous Controller 1 */
-#define AT91SAM9261_ID_SSC2	16	/* Serial Synchronous Controller 2 */
-#define AT91SAM9261_ID_TC0	17	/* Timer Counter 0 */
-#define AT91SAM9261_ID_TC1	18	/* Timer Counter 1 */
-#define AT91SAM9261_ID_TC2	19	/* Timer Counter 2 */
-#define AT91SAM9261_ID_UHP	20	/* USB Host port */
-#define AT91SAM9261_ID_LCDC	21	/* LDC Controller */
-#define AT91SAM9261_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9261_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
-#define AT91SAM9261_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9261_BASE_TCB0		0xfffa0000
-#define AT91SAM9261_BASE_TC0		0xfffa0000
-#define AT91SAM9261_BASE_TC1		0xfffa0040
-#define AT91SAM9261_BASE_TC2		0xfffa0080
-#define AT91SAM9261_BASE_UDP		0xfffa4000
-#define AT91SAM9261_BASE_MCI		0xfffa8000
-#define AT91SAM9261_BASE_TWI		0xfffac000
-#define AT91SAM9261_BASE_US0		0xfffb0000
-#define AT91SAM9261_BASE_US1		0xfffb4000
-#define AT91SAM9261_BASE_US2		0xfffb8000
-#define AT91SAM9261_BASE_SSC0		0xfffbc000
-#define AT91SAM9261_BASE_SSC1		0xfffc0000
-#define AT91SAM9261_BASE_SSC2		0xfffc4000
-#define AT91SAM9261_BASE_SPI0		0xfffc8000
-#define AT91SAM9261_BASE_SPI1		0xfffcc000
-#define AT91_BASE_SYS			0xffffea00
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
-#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
-
-#define AT91_USART0	AT91SAM9261_BASE_US0
-#define AT91_USART1	AT91SAM9261_BASE_US1
-#define AT91_USART2	AT91SAM9261_BASE_US2
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9261_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-#define AT91SAM9261_SRAM_SIZE	0x00028000	/* Internal SRAM size (160Kb) */
-
-#define AT91SAM9261_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT91SAM9261_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
-
-#define AT91SAM9261_UHP_BASE	0x00500000	/* USB Host controller */
-#define AT91SAM9261_LCDC_BASE	0x00600000	/* LDC controller */
-
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9261_matrix.h b/include/asm-arm/arch-at91/at91sam9261_matrix.h
deleted file mode 100644
index 6f07242..0000000
--- a/include/asm-arm/arch-at91/at91sam9261_matrix.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9261_matrix.h
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9261_MATRIX_H
-#define AT91SAM9261_MATRIX_H
-
-#define AT91_MATRIX_MCFG	(AT91_MATRIX + 0x00)	/* Master Configuration Register */
-#define		AT91_MATRIX_RCB0	(1 << 0)		/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1	(1 << 1)		/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x04)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x08)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x0C)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x10)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x14)	/* Slave Configuration Register 4 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
-
-#define AT91_MATRIX_TCR		(AT91_MATRIX + 0x24)	/* TCM Configuration Register */
-#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-#define			AT91_MATRIX_ITCM_0		(0 << 0)
-#define			AT91_MATRIX_ITCM_16		(5 << 0)
-#define			AT91_MATRIX_ITCM_32		(6 << 0)
-#define			AT91_MATRIX_ITCM_64		(7 << 0)
-#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-#define			AT91_MATRIX_DTCM_0		(0 << 4)
-#define			AT91_MATRIX_DTCM_16		(5 << 4)
-#define			AT91_MATRIX_DTCM_32		(6 << 4)
-#define			AT91_MATRIX_DTCM_64		(7 << 4)
-
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x30)	/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
-#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-
-#define AT91_MATRIX_USBPUCR	(AT91_MATRIX + 0x34)	/* USB Pad Pull-Up Control Register */
-#define		AT91_MATRIX_USBPUCR_PUON	(1 << 30)	/* USB Device PAD Pull-up Enable */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9263.h b/include/asm-arm/arch-at91/at91sam9263.h
deleted file mode 100644
index 018a647..0000000
--- a/include/asm-arm/arch-at91/at91sam9263.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9263.h
- *
- * (C) 2007 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91SAM9263 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9263_H
-#define AT91SAM9263_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
-#define AT91SAM9263_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91SAM9263_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91SAM9263_ID_PIOCDE	4	/* Parallel IO Controller C, D and E */
-#define AT91SAM9263_ID_US0	7	/* USART 0 */
-#define AT91SAM9263_ID_US1	8	/* USART 1 */
-#define AT91SAM9263_ID_US2	9	/* USART 2 */
-#define AT91SAM9263_ID_MCI0	10	/* Multimedia Card Interface 0 */
-#define AT91SAM9263_ID_MCI1	11	/* Multimedia Card Interface 1 */
-#define AT91SAM9263_ID_CAN	12	/* CAN */
-#define AT91SAM9263_ID_TWI	13	/* Two-Wire Interface */
-#define AT91SAM9263_ID_SPI0	14	/* Serial Peripheral Interface 0 */
-#define AT91SAM9263_ID_SPI1	15	/* Serial Peripheral Interface 1 */
-#define AT91SAM9263_ID_SSC0	16	/* Serial Synchronous Controller 0 */
-#define AT91SAM9263_ID_SSC1	17	/* Serial Synchronous Controller 1 */
-#define AT91SAM9263_ID_AC97C	18	/* AC97 Controller */
-#define AT91SAM9263_ID_TCB	19	/* Timer Counter 0, 1 and 2 */
-#define AT91SAM9263_ID_PWMC	20	/* Pulse Width Modulation Controller */
-#define AT91SAM9263_ID_EMAC	21	/* Ethernet */
-#define AT91SAM9263_ID_2DGE	23	/* 2D Graphic Engine */
-#define AT91SAM9263_ID_UDP	24	/* USB Device Port */
-#define AT91SAM9263_ID_ISI	25	/* Image Sensor Interface */
-#define AT91SAM9263_ID_LCDC	26	/* LCD Controller */
-#define AT91SAM9263_ID_DMA	27	/* DMA Controller */
-#define AT91SAM9263_ID_UHP	29	/* USB Host port */
-#define AT91SAM9263_ID_IRQ0	30	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9263_ID_IRQ1	31	/* Advanced Interrupt Controller (IRQ1) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9263_BASE_UDP		0xfff78000
-#define AT91SAM9263_BASE_TCB0		0xfff7c000
-#define AT91SAM9263_BASE_TC0		0xfff7c000
-#define AT91SAM9263_BASE_TC1		0xfff7c040
-#define AT91SAM9263_BASE_TC2		0xfff7c080
-#define AT91SAM9263_BASE_MCI0		0xfff80000
-#define AT91SAM9263_BASE_MCI1		0xfff84000
-#define AT91SAM9263_BASE_TWI		0xfff88000
-#define AT91SAM9263_BASE_US0		0xfff8c000
-#define AT91SAM9263_BASE_US1		0xfff90000
-#define AT91SAM9263_BASE_US2		0xfff94000
-#define AT91SAM9263_BASE_SSC0		0xfff98000
-#define AT91SAM9263_BASE_SSC1		0xfff9c000
-#define AT91SAM9263_BASE_AC97C		0xfffa0000
-#define AT91SAM9263_BASE_SPI0		0xfffa4000
-#define AT91SAM9263_BASE_SPI1		0xfffa8000
-#define AT91SAM9263_BASE_CAN		0xfffac000
-#define AT91SAM9263_BASE_PWMC		0xfffb8000
-#define AT91SAM9263_BASE_EMAC		0xfffbc000
-#define AT91SAM9263_BASE_ISI		0xfffc4000
-#define AT91SAM9263_BASE_2DGE		0xfffc8000
-#define AT91_BASE_SYS			0xffffe000
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_ECC0	(0xffffe000 - AT91_BASE_SYS)
-#define AT91_SDRAMC0	(0xffffe200 - AT91_BASE_SYS)
-#define AT91_SMC0	(0xffffe400 - AT91_BASE_SYS)
-#define AT91_ECC1	(0xffffe600 - AT91_BASE_SYS)
-#define AT91_SDRAMC1	(0xffffe800 - AT91_BASE_SYS)
-#define AT91_SMC1	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffec00 - AT91_BASE_SYS)
-#define AT91_CCFG	(0xffffed10 - AT91_BASE_SYS)
-#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
-#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
-#define AT91_PIOE	(0xfffffa00 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT0	(0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
-#define AT91_RTT1	(0xfffffd50 - AT91_BASE_SYS)
-#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
-
-#define AT91_USART0	AT91SAM9263_BASE_US0
-#define AT91_USART1	AT91SAM9263_BASE_US1
-#define AT91_USART2	AT91SAM9263_BASE_US2
-
-#define AT91_SMC	AT91_SMC0
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9263_SRAM0_BASE	0x00300000	/* Internal SRAM 0 base address */
-#define AT91SAM9263_SRAM0_SIZE	(80 * SZ_1K)	/* Internal SRAM 0 size (80Kb) */
-
-#define AT91SAM9263_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT91SAM9263_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
-
-#define AT91SAM9263_SRAM1_BASE	0x00500000	/* Internal SRAM 1 base address */
-#define AT91SAM9263_SRAM1_SIZE	SZ_16K		/* Internal SRAM 1 size (16Kb) */
-
-#define AT91SAM9263_LCDC_BASE	0x00700000	/* LCD Controller */
-#define AT91SAM9263_DMAC_BASE	0x00800000	/* DMA Controller */
-#define AT91SAM9263_UHP_BASE	0x00a00000	/* USB Host controller */
-
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9263_matrix.h b/include/asm-arm/arch-at91/at91sam9263_matrix.h
deleted file mode 100644
index 72f6e66..0000000
--- a/include/asm-arm/arch-at91/at91sam9263_matrix.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9263_matrix.h
- *
- *  Copyright (C) 2006 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9263 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9263_MATRIX_H
-#define AT91SAM9263_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
-#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
-#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
-#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
-
-#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define		AT91_MATRIX_RCB2		(1 << 2)
-#define		AT91_MATRIX_RCB3		(1 << 3)
-#define		AT91_MATRIX_RCB4		(1 << 4)
-#define		AT91_MATRIX_RCB5		(1 << 5)
-#define		AT91_MATRIX_RCB6		(1 << 6)
-#define		AT91_MATRIX_RCB7		(1 << 7)
-#define		AT91_MATRIX_RCB8		(1 << 8)
-
-#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x114)	/* TCM Configuration Register */
-#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-#define			AT91_MATRIX_ITCM_0		(0 << 0)
-#define			AT91_MATRIX_ITCM_16		(5 << 0)
-#define			AT91_MATRIX_ITCM_32		(6 << 0)
-#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-#define			AT91_MATRIX_DTCM_0		(0 << 4)
-#define			AT91_MATRIX_DTCM_16		(5 << 4)
-#define			AT91_MATRIX_DTCM_32		(6 << 4)
-
-#define AT91_MATRIX_EBI0CSA	(AT91_MATRIX + 0x120)	/* EBI0 Chip Select Assignment Register */
-#define		AT91_MATRIX_EBI0_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_EBI0_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_EBI0_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_EBI0_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_EBI0_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_EBI0_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_EBI0_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_EBI0_CS4A_SMC_CF1		(1 << 4)
-#define		AT91_MATRIX_EBI0_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_EBI0_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_EBI0_CS5A_SMC_CF2		(1 << 5)
-#define		AT91_MATRIX_EBI0_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_EBI0_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_EBI0_VDDIOMSEL_1_8V		(0 << 16)
-#define			AT91_MATRIX_EBI0_VDDIOMSEL_3_3V		(1 << 16)
-
-#define AT91_MATRIX_EBI1CSA	(AT91_MATRIX + 0x124)	/* EBI1 Chip Select Assignment Register */
-#define		AT91_MATRIX_EBI1_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_EBI1_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_EBI1_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_EBI1_CS2A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_EBI1_CS2A_SMC		(0 << 3)
-#define			AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_EBI1_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_EBI1_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_EBI1_VDDIOMSEL_1_8V		(0 << 16)
-#define			AT91_MATRIX_EBI1_VDDIOMSEL_3_3V		(1 << 16)
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9_sdramc.h b/include/asm-arm/arch-at91/at91sam9_sdramc.h
deleted file mode 100644
index d3b8b3d..0000000
--- a/include/asm-arm/arch-at91/at91sam9_sdramc.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9_sdramc.h
- *
- * SDRAM Controllers (SDRAMC) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9_SDRAMC_H
-#define AT91SAM9_SDRAMC_H
-
-/* SDRAM Controller (SDRAMC) registers */
-#define AT91_SDRAMC_MR		(AT91_SDRAMC + 0x00)	/* SDRAM Controller Mode Register */
-#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
-#define			AT91_SDRAMC_MODE_NORMAL		0
-#define			AT91_SDRAMC_MODE_NOP		1
-#define			AT91_SDRAMC_MODE_PRECHARGE	2
-#define			AT91_SDRAMC_MODE_LMR		3
-#define			AT91_SDRAMC_MODE_REFRESH	4
-#define			AT91_SDRAMC_MODE_EXT_LMR	5
-#define			AT91_SDRAMC_MODE_DEEP		6
-
-#define AT91_SDRAMC_TR		(AT91_SDRAMC + 0x04)	/* SDRAM Controller Refresh Timer Register */
-#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
-
-#define AT91_SDRAMC_CR		(AT91_SDRAMC + 0x08)	/* SDRAM Controller Configuration Register */
-#define		AT91_SDRAMC_NC		(3 << 0)		/* Number of Column Bits */
-#define			AT91_SDRAMC_NC_8	(0 << 0)
-#define			AT91_SDRAMC_NC_9	(1 << 0)
-#define			AT91_SDRAMC_NC_10	(2 << 0)
-#define			AT91_SDRAMC_NC_11	(3 << 0)
-#define		AT91_SDRAMC_NR		(3 << 2)		/* Number of Row Bits */
-#define			AT91_SDRAMC_NR_11	(0 << 2)
-#define			AT91_SDRAMC_NR_12	(1 << 2)
-#define			AT91_SDRAMC_NR_13	(2 << 2)
-#define		AT91_SDRAMC_NB		(1 << 4)		/* Number of Banks */
-#define			AT91_SDRAMC_NB_2	(0 << 4)
-#define			AT91_SDRAMC_NB_4	(1 << 4)
-#define		AT91_SDRAMC_CAS		(3 << 5)		/* CAS Latency */
-#define			AT91_SDRAMC_CAS_1	(1 << 5)
-#define			AT91_SDRAMC_CAS_2	(2 << 5)
-#define			AT91_SDRAMC_CAS_3	(3 << 5)
-#define		AT91_SDRAMC_DBW		(1 << 7)		/* Data Bus Width */
-#define			AT91_SDRAMC_DBW_32	(0 << 7)
-#define			AT91_SDRAMC_DBW_16	(1 << 7)
-#define		AT91_SDRAMC_TWR		(0xf <<  8)		/* Write Recovery Delay */
-#define		AT91_SDRAMC_TRC		(0xf << 12)		/* Row Cycle Delay */
-#define		AT91_SDRAMC_TRP		(0xf << 16)		/* Row Precharge Delay */
-#define		AT91_SDRAMC_TRCD	(0xf << 20)		/* Row to Column Delay */
-#define		AT91_SDRAMC_TRAS	(0xf << 24)		/* Active to Precharge Delay */
-#define		AT91_SDRAMC_TXSR	(0xf << 28)		/* Exit Self Refresh to Active Delay */
-
-#define AT91_SDRAMC_LPR		(AT91_SDRAMC + 0x10)	/* SDRAM Controller Low Power Register */
-#define		AT91_SDRAMC_LPCB		(3 << 0)	/* Low-power Configurations */
-#define			AT91_SDRAMC_LPCB_DISABLE		0
-#define			AT91_SDRAMC_LPCB_SELF_REFRESH		1
-#define			AT91_SDRAMC_LPCB_POWER_DOWN		2
-#define			AT91_SDRAMC_LPCB_DEEP_POWER_DOWN	3
-#define		AT91_SDRAMC_PASR		(7 << 4)	/* Partial Array Self Refresh */
-#define		AT91_SDRAMC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
-#define		AT91_SDRAMC_DS			(3 << 10)	/* Drive Strength */
-#define		AT91_SDRAMC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
-#define			AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
-#define			AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
-#define			AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
-
-#define AT91_SDRAMC_IER		(AT91_SDRAMC + 0x14)	/* SDRAM Controller Interrupt Enable Register */
-#define AT91_SDRAMC_IDR		(AT91_SDRAMC + 0x18)	/* SDRAM Controller Interrupt Disable Register */
-#define AT91_SDRAMC_IMR		(AT91_SDRAMC + 0x1C)	/* SDRAM Controller Interrupt Mask Register */
-#define AT91_SDRAMC_ISR		(AT91_SDRAMC + 0x20)	/* SDRAM Controller Interrupt Status Register */
-#define		AT91_SDRAMC_RES		(1 << 0)		/* Refresh Error Status */
-
-#define AT91_SDRAMC_MDR		(AT91_SDRAMC + 0x24)	/* SDRAM Memory Device Register */
-#define		AT91_SDRAMC_MD		(3 << 0)		/* Memory Device Type */
-#define			AT91_SDRAMC_MD_SDRAM		0
-#define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
-
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9_smc.h b/include/asm-arm/arch-at91/at91sam9_smc.h
deleted file mode 100644
index 9e49eed..0000000
--- a/include/asm-arm/arch-at91/at91sam9_smc.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9_smc.h
- *
- * Static Memory Controllers (SMC) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9_SMC_H
-#define AT91SAM9_SMC_H
-
-#define AT91_SMC_SETUP(n)	(AT91_SMC + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
-#define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
-#define			AT91_SMC_NWESETUP_(x)	((x) << 0)
-#define		AT91_SMC_NCS_WRSETUP	(0x3f << 8)			/* NCS Setup Length in Write Access */
-#define			AT91_SMC_NCS_WRSETUP_(x)	((x) << 8)
-#define		AT91_SMC_NRDSETUP	(0x3f << 16)			/* NRD Setup Length */
-#define			AT91_SMC_NRDSETUP_(x)	((x) << 16)
-#define		AT91_SMC_NCS_RDSETUP	(0x3f << 24)			/* NCS Setup Length in Read Access */
-#define			AT91_SMC_NCS_RDSETUP_(x)	((x) << 24)
-
-#define AT91_SMC_PULSE(n)	(AT91_SMC + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
-#define		AT91_SMC_NWEPULSE	(0x7f <<  0)			/* NWE Pulse Length */
-#define			AT91_SMC_NWEPULSE_(x)	((x) << 0)
-#define		AT91_SMC_NCS_WRPULSE	(0x7f <<  8)			/* NCS Pulse Length in Write Access */
-#define			AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
-#define		AT91_SMC_NRDPULSE	(0x7f << 16)			/* NRD Pulse Length */
-#define			AT91_SMC_NRDPULSE_(x)	((x) << 16)
-#define		AT91_SMC_NCS_RDPULSE	(0x7f << 24)			/* NCS Pulse Length in Read Access */
-#define			AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
-
-#define AT91_SMC_CYCLE(n)	(AT91_SMC + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
-#define		AT91_SMC_NWECYCLE	(0x1ff << 0 )			/* Total Write Cycle Length */
-#define			AT91_SMC_NWECYCLE_(x)	((x) << 0)
-#define		AT91_SMC_NRDCYCLE	(0x1ff << 16)			/* Total Read Cycle Length */
-#define			AT91_SMC_NRDCYCLE_(x)	((x) << 16)
-
-#define AT91_SMC_MODE(n)	(AT91_SMC + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
-#define		AT91_SMC_READMODE	(1 <<  0)			/* Read Mode */
-#define		AT91_SMC_WRITEMODE	(1 <<  1)			/* Write Mode */
-#define		AT91_SMC_EXNWMODE	(3 <<  4)			/* NWAIT Mode */
-#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 4)
-#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 4)
-#define			AT91_SMC_EXNWMODE_READY		(3 << 4)
-#define		AT91_SMC_BAT		(1 <<  8)			/* Byte Access Type */
-#define			AT91_SMC_BAT_SELECT		(0 << 8)
-#define			AT91_SMC_BAT_WRITE		(1 << 8)
-#define		AT91_SMC_DBW		(3 << 12)			/* Data Bus Width */
-#define			AT91_SMC_DBW_8			(0 << 12)
-#define			AT91_SMC_DBW_16			(1 << 12)
-#define			AT91_SMC_DBW_32			(2 << 12)
-#define		AT91_SMC_TDF		(0xf << 16)			/* Data Float Time. */
-#define			AT91_SMC_TDF_(x)		((x) << 16)
-#define		AT91_SMC_TDFMODE	(1 << 20)			/* TDF Optimization - Enabled */
-#define		AT91_SMC_PMEN		(1 << 24)			/* Page Mode Enabled */
-#define		AT91_SMC_PS		(3 << 28)			/* Page Size */
-#define			AT91_SMC_PS_4			(0 << 28)
-#define			AT91_SMC_PS_8			(1 << 28)
-#define			AT91_SMC_PS_16			(2 << 28)
-#define			AT91_SMC_PS_32			(3 << 28)
-
-#if defined(AT91_SMC1)		/* The AT91SAM9263 has 2 Static Memory contollers */
-#define AT91_SMC1_SETUP(n)	(AT91_SMC1 + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
-#define AT91_SMC1_PULSE(n)	(AT91_SMC1 + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
-#define AT91_SMC1_CYCLE(n)	(AT91_SMC1 + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
-#define AT91_SMC1_MODE(n)	(AT91_SMC1 + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9rl.h b/include/asm-arm/arch-at91/at91sam9rl.h
deleted file mode 100644
index 622e56f..0000000
--- a/include/asm-arm/arch-at91/at91sam9rl.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9260.h
- *
- *  Copyright (C) 2007 Atmel Corporation
- *
- * Common definitions.
- * Based on AT91SAM9RL datasheet revision A. (Preliminary)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#ifndef AT91SAM9RL_H
-#define AT91SAM9RL_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Controller */
-#define AT91SAM9RL_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91SAM9RL_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91SAM9RL_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91SAM9RL_ID_PIOD	5	/* Parallel IO Controller D */
-#define AT91SAM9RL_ID_US0	6	/* USART 0 */
-#define AT91SAM9RL_ID_US1	7	/* USART 1 */
-#define AT91SAM9RL_ID_US2	8	/* USART 2 */
-#define AT91SAM9RL_ID_US3	9	/* USART 3 */
-#define AT91SAM9RL_ID_MCI	10	/* Multimedia Card Interface */
-#define AT91SAM9RL_ID_TWI0	11	/* TWI 0 */
-#define AT91SAM9RL_ID_TWI1	12	/* TWI 1 */
-#define AT91SAM9RL_ID_SPI	13	/* Serial Peripheral Interface */
-#define AT91SAM9RL_ID_SSC0	14	/* Serial Synchronous Controller 0 */
-#define AT91SAM9RL_ID_SSC1	15	/* Serial Synchronous Controller 1 */
-#define AT91SAM9RL_ID_TC0	16	/* Timer Counter 0 */
-#define AT91SAM9RL_ID_TC1	17	/* Timer Counter 1 */
-#define AT91SAM9RL_ID_TC2	18	/* Timer Counter 2 */
-#define AT91SAM9RL_ID_PWMC	19	/* Pulse Width Modulation Controller */
-#define AT91SAM9RL_ID_TSC	20	/* Touch Screen Controller */
-#define AT91SAM9RL_ID_DMA	21	/* DMA Controller */
-#define AT91SAM9RL_ID_UDPHS	22	/* USB Device HS */
-#define AT91SAM9RL_ID_LCDC	23	/* LCD Controller */
-#define AT91SAM9RL_ID_AC97C	24	/* AC97 Controller */
-#define AT91SAM9RL_ID_IRQ0	31	/* Advanced Interrupt Controller (IRQ0) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9RL_BASE_TCB0	0xfffa0000
-#define AT91SAM9RL_BASE_TC0	0xfffa0000
-#define AT91SAM9RL_BASE_TC1	0xfffa0040
-#define AT91SAM9RL_BASE_TC2	0xfffa0080
-#define AT91SAM9RL_BASE_MCI	0xfffa4000
-#define AT91SAM9RL_BASE_TWI0	0xfffa8000
-#define AT91SAM9RL_BASE_TWI1	0xfffac000
-#define AT91SAM9RL_BASE_US0	0xfffb0000
-#define AT91SAM9RL_BASE_US1	0xfffb4000
-#define AT91SAM9RL_BASE_US2	0xfffb8000
-#define AT91SAM9RL_BASE_US3	0xfffbc000
-#define AT91SAM9RL_BASE_SSC0	0xfffc0000
-#define AT91SAM9RL_BASE_SSC1	0xfffc4000
-#define AT91SAM9RL_BASE_PWMC	0xfffc8000
-#define AT91SAM9RL_BASE_SPI	0xfffcc000
-#define AT91SAM9RL_BASE_TSC	0xfffd0000
-#define AT91SAM9RL_BASE_UDPHS	0xfffd4000
-#define AT91SAM9RL_BASE_AC97C	0xfffd8000
-#define AT91_BASE_SYS		0xffffc000
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_DMA	(0xffffe600 - AT91_BASE_SYS)
-#define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
-#define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
-#define AT91_PIOD	(0xfffffa00 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
-#define AT91_SCKCR	(0xfffffd50 - AT91_BASE_SYS)
-#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
-#define AT91_RTC	(0xfffffe00 - AT91_BASE_SYS)
-
-#define AT91_USART0	AT91SAM9RL_BASE_US0
-#define AT91_USART1	AT91SAM9RL_BASE_US1
-#define AT91_USART2	AT91SAM9RL_BASE_US2
-#define AT91_USART3	AT91SAM9RL_BASE_US3
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9RL_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-#define AT91SAM9RL_SRAM_SIZE	SZ_16K		/* Internal SRAM size (16Kb) */
-
-#define AT91SAM9RL_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT91SAM9RL_ROM_SIZE	(2 * SZ_16K)	/* Internal ROM size (32Kb) */
-
-#define AT91SAM9RL_LCDC_BASE	0x00500000	/* LCD Controller */
-#define AT91SAM9RL_UDPHS_FIFO	0x00600000	/* USB Device HS controller */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9rl_matrix.h b/include/asm-arm/arch-at91/at91sam9rl_matrix.h
deleted file mode 100644
index 8422417..0000000
--- a/include/asm-arm/arch-at91/at91sam9rl_matrix.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9rl_matrix.h
- *
- *  Copyright (C) 2007 Atmel Corporation
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9RL datasheet revision A. (Preliminary)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#ifndef AT91SAM9RL_MATRIX_H
-#define AT91SAM9RL_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
-#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-
-#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define		AT91_MATRIX_RCB2		(1 << 2)
-#define		AT91_MATRIX_RCB3		(1 << 3)
-#define		AT91_MATRIX_RCB4		(1 << 4)
-#define		AT91_MATRIX_RCB5		(1 << 5)
-
-#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x114)	/* TCM Configuration Register */
-#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-#define			AT91_MATRIX_ITCM_0		(0 << 0)
-#define			AT91_MATRIX_ITCM_16		(5 << 0)
-#define			AT91_MATRIX_ITCM_32		(6 << 0)
-#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-#define			AT91_MATRIX_DTCM_0		(0 << 4)
-#define			AT91_MATRIX_DTCM_16		(5 << 4)
-#define			AT91_MATRIX_DTCM_32		(6 << 4)
-
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI0 Chip Select Assignment Register */
-#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
-#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
-#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
-
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91x40.h b/include/asm-arm/arch-at91/at91x40.h
deleted file mode 100644
index 612203e..0000000
--- a/include/asm-arm/arch-at91/at91x40.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91x40.h
- *
- * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91X40_H
-#define AT91X40_H
-
-/*
- *	IRQ list.
- */
-#define AT91_ID_FIQ		0	/* FIQ */
-#define AT91_ID_SYS		1	/* System Peripheral */
-#define AT91X40_ID_USART0	2	/* USART port 0 */
-#define AT91X40_ID_USART1	3	/* USART port 1 */
-#define AT91X40_ID_TC0		4	/* Timer/Counter 0 */
-#define AT91X40_ID_TC1		5	/* Timer/Counter 1*/
-#define AT91X40_ID_TC2		6	/* Timer/Counter 2*/
-#define AT91X40_ID_WD		7	/* Watchdog? */
-#define AT91X40_ID_PIOA		8	/* Parallel IO Controller A */
-
-#define AT91X40_ID_IRQ0		16	/* External IRQ 0 */
-#define AT91X40_ID_IRQ1		17	/* External IRQ 1 */
-#define AT91X40_ID_IRQ2		18	/* External IRQ 2 */
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_BASE_SYS	0xffc00000
-
-#define AT91_EBI	(0xffe00000 - AT91_BASE_SYS)	/* External Bus Interface */
-#define AT91_SF		(0xfff00000 - AT91_BASE_SYS)	/* Special Function */
-#define AT91_USART1	(0xfffcc000 - AT91_BASE_SYS)	/* USART 1 */
-#define AT91_USART0	(0xfffd0000 - AT91_BASE_SYS)	/* USART 0 */
-#define AT91_TC		(0xfffe0000 - AT91_BASE_SYS)	/* Timer Counter */
-#define AT91_PIOA	(0xffff0000 - AT91_BASE_SYS)	/* PIO Controller A */
-#define AT91_PS		(0xffff4000 - AT91_BASE_SYS)	/* Power Save */
-#define AT91_WD		(0xffff8000 - AT91_BASE_SYS)	/* Watchdog Timer */
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)	/* Advanced Interrupt Controller */
-
-/*
- * The AT91x40 series doesn't have a debug unit like the other AT91 parts.
- * But it does have a chip identify register and extension ID, so define at
- * least these here.
- */
-#define AT91_DBGU_CIDR	(AT91_SF + 0)	/* CIDR in PS segment */
-#define AT91_DBGU_EXID	(AT91_SF + 4)	/* EXID in PS segment */
-
-#endif /* AT91X40_H */
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
deleted file mode 100644
index 48bbd854..0000000
--- a/include/asm-arm/arch-at91/board.h
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * include/asm-arm/arch-at91/board.h
- *
- *  Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * These are data structures found in platform_device.dev.platform_data,
- * and describing board-specific data needed by drivers.  For example,
- * which pin is used for a given GPIO role.
- *
- * In 2.6, drivers should strongly avoid board-specific knowledge so
- * that supporting new boards normally won't require driver patches.
- * Most board-specific knowledge should be in arch/.../board-*.c files.
- */
-
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-#include <linux/mtd/partitions.h>
-#include <linux/device.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/atmel_usba_udc.h>
-
- /* USB Device */
-struct at91_udc_data {
-	u8	vbus_pin;		/* high == host powering us */
-	u8	pullup_pin;		/* active == D+ pulled up */
-	u8	pullup_active_low;	/* true == pullup_pin is active low */
-};
-extern void __init at91_add_device_udc(struct at91_udc_data *data);
-
- /* USB High Speed Device */
-extern void __init at91_add_device_usba(struct usba_platform_data *data);
-
- /* Compact Flash */
-struct at91_cf_data {
-	u8	irq_pin;		/* I/O IRQ */
-	u8	det_pin;		/* Card detect */
-	u8	vcc_pin;		/* power switching */
-	u8	rst_pin;		/* card reset */
-	u8	chipselect;		/* EBI Chip Select number */
-};
-extern void __init at91_add_device_cf(struct at91_cf_data *data);
-
- /* MMC / SD */
-struct at91_mmc_data {
-	u8		det_pin;	/* card detect IRQ */
-	unsigned	slot_b:1;	/* uses Slot B */
-	unsigned	wire4:1;	/* (SD) supports DAT0..DAT3 */
-	u8		wp_pin;		/* (SD) writeprotect detect */
-	u8		vcc_pin;	/* power switching (high == on) */
-};
-extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
-
- /* Ethernet (EMAC & MACB) */
-struct at91_eth_data {
-	u32		phy_mask;
-	u8		phy_irq_pin;	/* PHY IRQ */
-	u8		is_rmii;	/* using RMII interface? */
-};
-extern void __init at91_add_device_eth(struct at91_eth_data *data);
-
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9)
-#define eth_platform_data	at91_eth_data
-#endif
-
- /* USB Host */
-struct at91_usbh_data {
-	u8		ports;		/* number of ports on root hub */
-	u8		vbus_pin[];	/* port power-control pin */
-};
-extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
-
- /* NAND / SmartMedia */
-struct atmel_nand_data {
-	u8		enable_pin;	/* chip enable */
-	u8		det_pin;	/* card detect */
-	u8		rdy_pin;	/* ready/busy */
-	u8		ale;		/* address line number connected to ALE */
-	u8		cle;		/* address line number connected to CLE */
-	u8		bus_width_16;	/* buswidth is 16 bit */
-	struct mtd_partition* (*partition_info)(int, int*);
-};
-extern void __init at91_add_device_nand(struct atmel_nand_data *data);
-
- /* I2C*/
-extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
-
- /* SPI */
-extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
-
- /* Serial */
-#define ATMEL_UART_CTS	0x01
-#define ATMEL_UART_RTS	0x02
-#define ATMEL_UART_DSR	0x04
-#define ATMEL_UART_DTR	0x08
-#define ATMEL_UART_DCD	0x10
-#define ATMEL_UART_RI	0x20
-
-extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
-extern void __init at91_set_serial_console(unsigned portnr);
-
-struct at91_uart_config {
-	unsigned short	console_tty;	/* tty number of serial console */
-	unsigned short	nr_tty;		/* number of serial tty's */
-	short		tty_map[];	/* map UART to tty number */
-};
-extern struct platform_device *atmel_default_console_device;
-extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
-
-struct atmel_uart_data {
-	short		use_dma_tx;	/* use transmit DMA? */
-	short		use_dma_rx;	/* use receive DMA? */
-	void __iomem	*regs;		/* virtual base address, if any */
-};
-extern void __init at91_add_device_serial(void);
-
-/*
- * SSC -- accessed through ssc_request(id).  Drivers don't bind to SSC
- * platform devices.  Their SSC ID is part of their configuration data,
- * along with information about which SSC signals they should use.
- */
-#define ATMEL_SSC_TK	0x01
-#define ATMEL_SSC_TF	0x02
-#define ATMEL_SSC_TD	0x04
-#define ATMEL_SSC_TX	(ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
-
-#define ATMEL_SSC_RK	0x10
-#define ATMEL_SSC_RF	0x20
-#define ATMEL_SSC_RD	0x40
-#define ATMEL_SSC_RX	(ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
-
-extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
-
- /* LCD Controller */
-struct atmel_lcdfb_info;
-extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
-
- /* AC97 */
-struct atmel_ac97_data {
-	u8		reset_pin;	/* reset */
-};
-extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
-
- /* ISI */
-extern void __init at91_add_device_isi(void);
-
- /* LEDs */
-extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
-extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
-
-/* FIXME: this needs a better location, but gets stuff building again */
-extern int at91_suspend_entering_slow_clock(void);
-
-#endif
diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h
deleted file mode 100644
index f24b55c..0000000
--- a/include/asm-arm/arch-at91/cpu.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * include/asm-arm/arch-at91/cpu.h
- *
- *  Copyright (C) 2006 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_CPU_H
-#define __ASM_ARCH_CPU_H
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_dbgu.h>
-
-
-#define ARCH_ID_AT91RM9200	0x09290780
-#define ARCH_ID_AT91SAM9260	0x019803a0
-#define ARCH_ID_AT91SAM9261	0x019703a0
-#define ARCH_ID_AT91SAM9263	0x019607a0
-#define ARCH_ID_AT91SAM9G20	0x019905a0
-#define ARCH_ID_AT91SAM9RL64	0x019b03a0
-#define ARCH_ID_AT91CAP9	0x039A03A0
-
-#define ARCH_ID_AT91SAM9XE128	0x329973a0
-#define ARCH_ID_AT91SAM9XE256	0x329a93a0
-#define ARCH_ID_AT91SAM9XE512	0x329aa3a0
-
-#define ARCH_ID_AT91M40800	0x14080044
-#define ARCH_ID_AT91R40807	0x44080746
-#define ARCH_ID_AT91M40807	0x14080745
-#define ARCH_ID_AT91R40008	0x44000840
-
-static inline unsigned long at91_cpu_identify(void)
-{
-	return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
-}
-
-
-#define ARCH_FAMILY_AT91X92	0x09200000
-#define ARCH_FAMILY_AT91SAM9	0x01900000
-#define ARCH_FAMILY_AT91SAM9XE	0x02900000
-
-static inline unsigned long at91_arch_identify(void)
-{
-	return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
-}
-
-
-#ifdef CONFIG_ARCH_AT91RM9200
-#define cpu_is_at91rm9200()	(at91_cpu_identify() == ARCH_ID_AT91RM9200)
-#else
-#define cpu_is_at91rm9200()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9260
-#define cpu_is_at91sam9xe()	(at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE)
-#define cpu_is_at91sam9260()	((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe())
-#else
-#define cpu_is_at91sam9xe()	(0)
-#define cpu_is_at91sam9260()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9G20
-#define cpu_is_at91sam9g20()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G20)
-#else
-#define cpu_is_at91sam9g20()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9261
-#define cpu_is_at91sam9261()	(at91_cpu_identify() == ARCH_ID_AT91SAM9261)
-#else
-#define cpu_is_at91sam9261()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9263
-#define cpu_is_at91sam9263()	(at91_cpu_identify() == ARCH_ID_AT91SAM9263)
-#else
-#define cpu_is_at91sam9263()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9RL
-#define cpu_is_at91sam9rl()	(at91_cpu_identify() == ARCH_ID_AT91SAM9RL64)
-#else
-#define cpu_is_at91sam9rl()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91CAP9
-#define cpu_is_at91cap9()	(at91_cpu_identify() == ARCH_ID_AT91CAP9)
-#else
-#define cpu_is_at91cap9()	(0)
-#endif
-
-/*
- * Since this is ARM, we will never run on any AVR32 CPU. But these
- * definitions may reduce clutter in common drivers.
- */
-#define cpu_is_at32ap7000()	(0)
-
-#endif
diff --git a/include/asm-arm/arch-at91/debug-macro.S b/include/asm-arm/arch-at91/debug-macro.S
deleted file mode 100644
index ff28696..0000000
--- a/include/asm-arm/arch-at91/debug-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-at91/debug-macro.S
- *
- *  Copyright (C) 2003-2005 SAN People
- *
- * Debugging macro include header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_dbgu.h>
-
-	.macro	addruart,rx
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1						@ MMU enabled?
-	ldreq	\rx, =(AT91_BASE_SYS + AT91_DBGU)		@ System peripherals (phys address)
-	ldrne	\rx, =(AT91_VA_BASE_SYS	+ AT91_DBGU)		@ System peripherals (virt address)
-	.endm
-
-	.macro	senduart,rd,rx
-	strb	\rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)]	@ Write to Transmitter Holding Register
-	.endm
-
-	.macro	waituart,rd,rx
-1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)]		@ Read Status Register
-	tst	\rd, #AT91_DBGU_TXRDY				@ DBGU_TXRDY = 1 when ready to transmit
-	beq	1001b
-	.endm
-
-	.macro	busyuart,rd,rx
-1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)]		@ Read Status Register
-	tst	\rd, #AT91_DBGU_TXEMPTY				@ DBGU_TXEMPTY = 1 when transmission complete
-	beq	1001b
-	.endm
-
diff --git a/include/asm-arm/arch-at91/dma.h b/include/asm-arm/arch-at91/dma.h
deleted file mode 100644
index 7745654..0000000
--- a/include/asm-arm/arch-at91/dma.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-arm/arch-at91/dma.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-at91/entry-macro.S b/include/asm-arm/arch-at91/entry-macro.S
deleted file mode 100644
index cbaf605..0000000
--- a/include/asm-arm/arch-at91/entry-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-at91/entry-macro.S
- *
- *  Copyright (C) 2003-2005 SAN People
- *
- * Low-level IRQ helper macros for AT91RM9200 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_aic.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =(AT91_VA_BASE_SYS + AT91_AIC)		@ base virtual address of AIC peripheral
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)]	@ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
-	ldr	\irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)]	@ read interrupt source number
-	teq	\irqstat, #0					@ ISR is 0 when no current interrupt, or spurious interrupt
-	streq	\tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)]	@ not going to be handled further, then ACK it now.
-	.endm
-
diff --git a/include/asm-arm/arch-at91/gpio.h b/include/asm-arm/arch-at91/gpio.h
deleted file mode 100644
index 0a241e2..0000000
--- a/include/asm-arm/arch-at91/gpio.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * include/asm-arm/arch-at91/gpio.h
- *
- *  Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
-#define __ASM_ARCH_AT91RM9200_GPIO_H
-
-#include <asm/irq.h>
-
-#define PIN_BASE		NR_AIC_IRQS
-
-#define MAX_GPIO_BANKS		5
-
-/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
-
-#define	AT91_PIN_PA0	(PIN_BASE + 0x00 + 0)
-#define	AT91_PIN_PA1	(PIN_BASE + 0x00 + 1)
-#define	AT91_PIN_PA2	(PIN_BASE + 0x00 + 2)
-#define	AT91_PIN_PA3	(PIN_BASE + 0x00 + 3)
-#define	AT91_PIN_PA4	(PIN_BASE + 0x00 + 4)
-#define	AT91_PIN_PA5	(PIN_BASE + 0x00 + 5)
-#define	AT91_PIN_PA6	(PIN_BASE + 0x00 + 6)
-#define	AT91_PIN_PA7	(PIN_BASE + 0x00 + 7)
-#define	AT91_PIN_PA8	(PIN_BASE + 0x00 + 8)
-#define	AT91_PIN_PA9	(PIN_BASE + 0x00 + 9)
-#define	AT91_PIN_PA10	(PIN_BASE + 0x00 + 10)
-#define	AT91_PIN_PA11	(PIN_BASE + 0x00 + 11)
-#define	AT91_PIN_PA12	(PIN_BASE + 0x00 + 12)
-#define	AT91_PIN_PA13	(PIN_BASE + 0x00 + 13)
-#define	AT91_PIN_PA14	(PIN_BASE + 0x00 + 14)
-#define	AT91_PIN_PA15	(PIN_BASE + 0x00 + 15)
-#define	AT91_PIN_PA16	(PIN_BASE + 0x00 + 16)
-#define	AT91_PIN_PA17	(PIN_BASE + 0x00 + 17)
-#define	AT91_PIN_PA18	(PIN_BASE + 0x00 + 18)
-#define	AT91_PIN_PA19	(PIN_BASE + 0x00 + 19)
-#define	AT91_PIN_PA20	(PIN_BASE + 0x00 + 20)
-#define	AT91_PIN_PA21	(PIN_BASE + 0x00 + 21)
-#define	AT91_PIN_PA22	(PIN_BASE + 0x00 + 22)
-#define	AT91_PIN_PA23	(PIN_BASE + 0x00 + 23)
-#define	AT91_PIN_PA24	(PIN_BASE + 0x00 + 24)
-#define	AT91_PIN_PA25	(PIN_BASE + 0x00 + 25)
-#define	AT91_PIN_PA26	(PIN_BASE + 0x00 + 26)
-#define	AT91_PIN_PA27	(PIN_BASE + 0x00 + 27)
-#define	AT91_PIN_PA28	(PIN_BASE + 0x00 + 28)
-#define	AT91_PIN_PA29	(PIN_BASE + 0x00 + 29)
-#define	AT91_PIN_PA30	(PIN_BASE + 0x00 + 30)
-#define	AT91_PIN_PA31	(PIN_BASE + 0x00 + 31)
-
-#define	AT91_PIN_PB0	(PIN_BASE + 0x20 + 0)
-#define	AT91_PIN_PB1	(PIN_BASE + 0x20 + 1)
-#define	AT91_PIN_PB2	(PIN_BASE + 0x20 + 2)
-#define	AT91_PIN_PB3	(PIN_BASE + 0x20 + 3)
-#define	AT91_PIN_PB4	(PIN_BASE + 0x20 + 4)
-#define	AT91_PIN_PB5	(PIN_BASE + 0x20 + 5)
-#define	AT91_PIN_PB6	(PIN_BASE + 0x20 + 6)
-#define	AT91_PIN_PB7	(PIN_BASE + 0x20 + 7)
-#define	AT91_PIN_PB8	(PIN_BASE + 0x20 + 8)
-#define	AT91_PIN_PB9	(PIN_BASE + 0x20 + 9)
-#define	AT91_PIN_PB10	(PIN_BASE + 0x20 + 10)
-#define	AT91_PIN_PB11	(PIN_BASE + 0x20 + 11)
-#define	AT91_PIN_PB12	(PIN_BASE + 0x20 + 12)
-#define	AT91_PIN_PB13	(PIN_BASE + 0x20 + 13)
-#define	AT91_PIN_PB14	(PIN_BASE + 0x20 + 14)
-#define	AT91_PIN_PB15	(PIN_BASE + 0x20 + 15)
-#define	AT91_PIN_PB16	(PIN_BASE + 0x20 + 16)
-#define	AT91_PIN_PB17	(PIN_BASE + 0x20 + 17)
-#define	AT91_PIN_PB18	(PIN_BASE + 0x20 + 18)
-#define	AT91_PIN_PB19	(PIN_BASE + 0x20 + 19)
-#define	AT91_PIN_PB20	(PIN_BASE + 0x20 + 20)
-#define	AT91_PIN_PB21	(PIN_BASE + 0x20 + 21)
-#define	AT91_PIN_PB22	(PIN_BASE + 0x20 + 22)
-#define	AT91_PIN_PB23	(PIN_BASE + 0x20 + 23)
-#define	AT91_PIN_PB24	(PIN_BASE + 0x20 + 24)
-#define	AT91_PIN_PB25	(PIN_BASE + 0x20 + 25)
-#define	AT91_PIN_PB26	(PIN_BASE + 0x20 + 26)
-#define	AT91_PIN_PB27	(PIN_BASE + 0x20 + 27)
-#define	AT91_PIN_PB28	(PIN_BASE + 0x20 + 28)
-#define	AT91_PIN_PB29	(PIN_BASE + 0x20 + 29)
-#define	AT91_PIN_PB30	(PIN_BASE + 0x20 + 30)
-#define	AT91_PIN_PB31	(PIN_BASE + 0x20 + 31)
-
-#define	AT91_PIN_PC0	(PIN_BASE + 0x40 + 0)
-#define	AT91_PIN_PC1	(PIN_BASE + 0x40 + 1)
-#define	AT91_PIN_PC2	(PIN_BASE + 0x40 + 2)
-#define	AT91_PIN_PC3	(PIN_BASE + 0x40 + 3)
-#define	AT91_PIN_PC4	(PIN_BASE + 0x40 + 4)
-#define	AT91_PIN_PC5	(PIN_BASE + 0x40 + 5)
-#define	AT91_PIN_PC6	(PIN_BASE + 0x40 + 6)
-#define	AT91_PIN_PC7	(PIN_BASE + 0x40 + 7)
-#define	AT91_PIN_PC8	(PIN_BASE + 0x40 + 8)
-#define	AT91_PIN_PC9	(PIN_BASE + 0x40 + 9)
-#define	AT91_PIN_PC10	(PIN_BASE + 0x40 + 10)
-#define	AT91_PIN_PC11	(PIN_BASE + 0x40 + 11)
-#define	AT91_PIN_PC12	(PIN_BASE + 0x40 + 12)
-#define	AT91_PIN_PC13	(PIN_BASE + 0x40 + 13)
-#define	AT91_PIN_PC14	(PIN_BASE + 0x40 + 14)
-#define	AT91_PIN_PC15	(PIN_BASE + 0x40 + 15)
-#define	AT91_PIN_PC16	(PIN_BASE + 0x40 + 16)
-#define	AT91_PIN_PC17	(PIN_BASE + 0x40 + 17)
-#define	AT91_PIN_PC18	(PIN_BASE + 0x40 + 18)
-#define	AT91_PIN_PC19	(PIN_BASE + 0x40 + 19)
-#define	AT91_PIN_PC20	(PIN_BASE + 0x40 + 20)
-#define	AT91_PIN_PC21	(PIN_BASE + 0x40 + 21)
-#define	AT91_PIN_PC22	(PIN_BASE + 0x40 + 22)
-#define	AT91_PIN_PC23	(PIN_BASE + 0x40 + 23)
-#define	AT91_PIN_PC24	(PIN_BASE + 0x40 + 24)
-#define	AT91_PIN_PC25	(PIN_BASE + 0x40 + 25)
-#define	AT91_PIN_PC26	(PIN_BASE + 0x40 + 26)
-#define	AT91_PIN_PC27	(PIN_BASE + 0x40 + 27)
-#define	AT91_PIN_PC28	(PIN_BASE + 0x40 + 28)
-#define	AT91_PIN_PC29	(PIN_BASE + 0x40 + 29)
-#define	AT91_PIN_PC30	(PIN_BASE + 0x40 + 30)
-#define	AT91_PIN_PC31	(PIN_BASE + 0x40 + 31)
-
-#define	AT91_PIN_PD0	(PIN_BASE + 0x60 + 0)
-#define	AT91_PIN_PD1	(PIN_BASE + 0x60 + 1)
-#define	AT91_PIN_PD2	(PIN_BASE + 0x60 + 2)
-#define	AT91_PIN_PD3	(PIN_BASE + 0x60 + 3)
-#define	AT91_PIN_PD4	(PIN_BASE + 0x60 + 4)
-#define	AT91_PIN_PD5	(PIN_BASE + 0x60 + 5)
-#define	AT91_PIN_PD6	(PIN_BASE + 0x60 + 6)
-#define	AT91_PIN_PD7	(PIN_BASE + 0x60 + 7)
-#define	AT91_PIN_PD8	(PIN_BASE + 0x60 + 8)
-#define	AT91_PIN_PD9	(PIN_BASE + 0x60 + 9)
-#define	AT91_PIN_PD10	(PIN_BASE + 0x60 + 10)
-#define	AT91_PIN_PD11	(PIN_BASE + 0x60 + 11)
-#define	AT91_PIN_PD12	(PIN_BASE + 0x60 + 12)
-#define	AT91_PIN_PD13	(PIN_BASE + 0x60 + 13)
-#define	AT91_PIN_PD14	(PIN_BASE + 0x60 + 14)
-#define	AT91_PIN_PD15	(PIN_BASE + 0x60 + 15)
-#define	AT91_PIN_PD16	(PIN_BASE + 0x60 + 16)
-#define	AT91_PIN_PD17	(PIN_BASE + 0x60 + 17)
-#define	AT91_PIN_PD18	(PIN_BASE + 0x60 + 18)
-#define	AT91_PIN_PD19	(PIN_BASE + 0x60 + 19)
-#define	AT91_PIN_PD20	(PIN_BASE + 0x60 + 20)
-#define	AT91_PIN_PD21	(PIN_BASE + 0x60 + 21)
-#define	AT91_PIN_PD22	(PIN_BASE + 0x60 + 22)
-#define	AT91_PIN_PD23	(PIN_BASE + 0x60 + 23)
-#define	AT91_PIN_PD24	(PIN_BASE + 0x60 + 24)
-#define	AT91_PIN_PD25	(PIN_BASE + 0x60 + 25)
-#define	AT91_PIN_PD26	(PIN_BASE + 0x60 + 26)
-#define	AT91_PIN_PD27	(PIN_BASE + 0x60 + 27)
-#define	AT91_PIN_PD28	(PIN_BASE + 0x60 + 28)
-#define	AT91_PIN_PD29	(PIN_BASE + 0x60 + 29)
-#define	AT91_PIN_PD30	(PIN_BASE + 0x60 + 30)
-#define	AT91_PIN_PD31	(PIN_BASE + 0x60 + 31)
-
-#define	AT91_PIN_PE0	(PIN_BASE + 0x80 + 0)
-#define	AT91_PIN_PE1	(PIN_BASE + 0x80 + 1)
-#define	AT91_PIN_PE2	(PIN_BASE + 0x80 + 2)
-#define	AT91_PIN_PE3	(PIN_BASE + 0x80 + 3)
-#define	AT91_PIN_PE4	(PIN_BASE + 0x80 + 4)
-#define	AT91_PIN_PE5	(PIN_BASE + 0x80 + 5)
-#define	AT91_PIN_PE6	(PIN_BASE + 0x80 + 6)
-#define	AT91_PIN_PE7	(PIN_BASE + 0x80 + 7)
-#define	AT91_PIN_PE8	(PIN_BASE + 0x80 + 8)
-#define	AT91_PIN_PE9	(PIN_BASE + 0x80 + 9)
-#define	AT91_PIN_PE10	(PIN_BASE + 0x80 + 10)
-#define	AT91_PIN_PE11	(PIN_BASE + 0x80 + 11)
-#define	AT91_PIN_PE12	(PIN_BASE + 0x80 + 12)
-#define	AT91_PIN_PE13	(PIN_BASE + 0x80 + 13)
-#define	AT91_PIN_PE14	(PIN_BASE + 0x80 + 14)
-#define	AT91_PIN_PE15	(PIN_BASE + 0x80 + 15)
-#define	AT91_PIN_PE16	(PIN_BASE + 0x80 + 16)
-#define	AT91_PIN_PE17	(PIN_BASE + 0x80 + 17)
-#define	AT91_PIN_PE18	(PIN_BASE + 0x80 + 18)
-#define	AT91_PIN_PE19	(PIN_BASE + 0x80 + 19)
-#define	AT91_PIN_PE20	(PIN_BASE + 0x80 + 20)
-#define	AT91_PIN_PE21	(PIN_BASE + 0x80 + 21)
-#define	AT91_PIN_PE22	(PIN_BASE + 0x80 + 22)
-#define	AT91_PIN_PE23	(PIN_BASE + 0x80 + 23)
-#define	AT91_PIN_PE24	(PIN_BASE + 0x80 + 24)
-#define	AT91_PIN_PE25	(PIN_BASE + 0x80 + 25)
-#define	AT91_PIN_PE26	(PIN_BASE + 0x80 + 26)
-#define	AT91_PIN_PE27	(PIN_BASE + 0x80 + 27)
-#define	AT91_PIN_PE28	(PIN_BASE + 0x80 + 28)
-#define	AT91_PIN_PE29	(PIN_BASE + 0x80 + 29)
-#define	AT91_PIN_PE30	(PIN_BASE + 0x80 + 30)
-#define	AT91_PIN_PE31	(PIN_BASE + 0x80 + 31)
-
-#ifndef __ASSEMBLY__
-/* setup setup routines, called from board init or driver probe() */
-extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
-extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
-extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
-
-/* callable at any time */
-extern int at91_set_gpio_value(unsigned pin, int value);
-extern int at91_get_gpio_value(unsigned pin);
-
-/* callable only from core power-management code */
-extern void at91_gpio_suspend(void);
-extern void at91_gpio_resume(void);
-
-/*-------------------------------------------------------------------------*/
-
-/* wrappers for "new style" GPIO calls. the old AT91-specfic ones should
- * eventually be removed (along with this errno.h inclusion), and the
- * gpio request/free calls should probably be implemented.
- */
-
-#include <asm/errno.h>
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-}
-
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return at91_get_gpio_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	at91_set_gpio_value(gpio, value);
-}
-
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return gpio;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq;
-}
-
-#endif	/* __ASSEMBLY__ */
-
-#endif
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
deleted file mode 100644
index 016a3a3..0000000
--- a/include/asm-arm/arch-at91/hardware.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * include/asm-arm/arch-at91/hardware.h
- *
- *  Copyright (C) 2003 SAN People
- *  Copyright (C) 2003 ATMEL
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-#if defined(CONFIG_ARCH_AT91RM9200)
-#include <asm/arch/at91rm9200.h>
-#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
-#include <asm/arch/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261)
-#include <asm/arch/at91sam9261.h>
-#elif defined(CONFIG_ARCH_AT91SAM9263)
-#include <asm/arch/at91sam9263.h>
-#elif defined(CONFIG_ARCH_AT91SAM9RL)
-#include <asm/arch/at91sam9rl.h>
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <asm/arch/at91cap9.h>
-#elif defined(CONFIG_ARCH_AT91X40)
-#include <asm/arch/at91x40.h>
-#else
-#error "Unsupported AT91 processor"
-#endif
-
-
-#ifdef CONFIG_MMU
-/*
- * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
- * to 0xFEF78000 .. 0xFF000000.  (544Kb)
- */
-#define AT91_IO_PHYS_BASE	0xFFF78000
-#define AT91_IO_VIRT_BASE	(0xFF000000 - AT91_IO_SIZE)
-#else
-/*
- * Identity mapping for the non MMU case.
- */
-#define AT91_IO_PHYS_BASE	AT91_BASE_SYS
-#define AT91_IO_VIRT_BASE	AT91_IO_PHYS_BASE
-#endif
-
-#define AT91_IO_SIZE		(0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
-
- /* Convert a physical IO address to virtual IO address */
-#define AT91_IO_P2V(x)		((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
-
-/*
- * Virtual to Physical Address mapping for IO devices.
- */
-#define AT91_VA_BASE_SYS	AT91_IO_P2V(AT91_BASE_SYS)
-#define AT91_VA_BASE_EMAC	AT91_IO_P2V(AT91RM9200_BASE_EMAC)
-
- /* Internal SRAM is mapped below the IO devices */
-#define AT91_SRAM_MAX		SZ_1M
-#define AT91_VIRT_BASE		(AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
-
-/* Serial ports */
-#define ATMEL_MAX_UART		7		/* 6 USART3's and one DBGU port (SAM9260) */
-
-/* External Memory Map */
-#define AT91_CHIPSELECT_0	0x10000000
-#define AT91_CHIPSELECT_1	0x20000000
-#define AT91_CHIPSELECT_2	0x30000000
-#define AT91_CHIPSELECT_3	0x40000000
-#define AT91_CHIPSELECT_4	0x50000000
-#define AT91_CHIPSELECT_5	0x60000000
-#define AT91_CHIPSELECT_6	0x70000000
-#define AT91_CHIPSELECT_7	0x80000000
-
-/* SDRAM */
-#ifdef CONFIG_DRAM_BASE
-#define AT91_SDRAM_BASE		CONFIG_DRAM_BASE
-#else
-#define AT91_SDRAM_BASE		AT91_CHIPSELECT_1
-#endif
-
-/* Clocks */
-#define AT91_SLOW_CLOCK		32768		/* slow clock */
-
-
-#endif
diff --git a/include/asm-arm/arch-at91/io.h b/include/asm-arm/arch-at91/io.h
deleted file mode 100644
index f8beaa2..0000000
--- a/include/asm-arm/arch-at91/io.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-arm/arch-at91/io.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT		0xFFFFFFFF
-
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned int at91_sys_read(unsigned int reg_offset)
-{
-	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-
-	return __raw_readl(addr + reg_offset);
-}
-
-static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
-{
-	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-
-	__raw_writel(value, addr + reg_offset);
-}
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91/irqs.h b/include/asm-arm/arch-at91/irqs.h
deleted file mode 100644
index 70b1216..0000000
--- a/include/asm-arm/arch-at91/irqs.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-arm/arch-at91/irqs.h
- *
- *  Copyright (C) 2004 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include <asm/io.h>
-#include <asm/arch/at91_aic.h>
-
-#define NR_AIC_IRQS 32
-
-
-/*
- * Acknowledge interrupt with AIC after interrupt has been handled.
- *   (by kernel/irq.c)
- */
-#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0)
-
-
-/*
- * IRQ interrupt symbols are the AT91xxx_ID_* symbols
- * for IRQs handled directly through the AIC, or else the AT91_PIN_*
- * symbols in gpio.h for ones handled indirectly as GPIOs.
- * We make provision for 5 banks of GPIO.
- */
-#define	NR_IRQS		(NR_AIC_IRQS + (5 * 32))
-
-/* FIQ is AIC source 0. */
-#define FIQ_START AT91_ID_FIQ
-
-#endif
diff --git a/include/asm-arm/arch-at91/memory.h b/include/asm-arm/arch-at91/memory.h
deleted file mode 100644
index 904fbd6..0000000
--- a/include/asm-arm/arch-at91/memory.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-at91/memory.h
- *
- *  Copyright (C) 2004 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/arch/hardware.h>
-
-#define PHYS_OFFSET	(AT91_SDRAM_BASE)
-
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-at91/system.h b/include/asm-arm/arch-at91/system.h
deleted file mode 100644
index c5e3d03..0000000
--- a/include/asm-arm/arch-at91/system.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * include/asm-arm/arch-at91/system.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_st.h>
-#include <asm/arch/at91_dbgu.h>
-
-static inline void arch_idle(void)
-{
-	/*
-	 * Disable the processor clock.  The processor will be automatically
-	 * re-enabled by an interrupt or by a reset.
-	 */
-//	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-
-	/*
-	 * Set the processor (CP15) into 'Wait for Interrupt' mode.
-	 * Unlike disabling the processor clock via the PMC (above)
-	 *  this allows the processor to be woken via JTAG.
-	 */
-	cpu_do_idle();
-}
-
-void (*at91_arch_reset)(void);
-
-static inline void arch_reset(char mode)
-{
-	/* call the CPU-specific reset function */
-	if (at91_arch_reset)
-		(at91_arch_reset)();
-}
-
-#endif
diff --git a/include/asm-arm/arch-at91/timex.h b/include/asm-arm/arch-at91/timex.h
deleted file mode 100644
index 67c86a8..0000000
--- a/include/asm-arm/arch-at91/timex.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * include/asm-arm/arch-at91/timex.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#include <asm/arch/hardware.h>
-
-#if defined(CONFIG_ARCH_AT91RM9200)
-
-#define CLOCK_TICK_RATE		(AT91_SLOW_CLOCK)
-
-#elif defined(CONFIG_ARCH_AT91SAM9260)
-
-#if defined(CONFIG_MACH_USB_A9260) || defined(CONFIG_MACH_QIL_A9260)
-#define AT91SAM9_MASTER_CLOCK	90000000
-#else
-#define AT91SAM9_MASTER_CLOCK	99300000
-#endif
-
-#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9261)
-
-#define AT91SAM9_MASTER_CLOCK	99300000
-#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9263)
-
-#if defined(CONFIG_MACH_USB_A9263)
-#define AT91SAM9_MASTER_CLOCK	90000000
-#else
-#define AT91SAM9_MASTER_CLOCK	99959500
-#endif
-
-#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9RL)
-
-#define AT91SAM9_MASTER_CLOCK	100000000
-#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9G20)
-
-#define AT91SAM9_MASTER_CLOCK	132096000
-#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91CAP9)
-
-#define AT91CAP9_MASTER_CLOCK	100000000
-#define CLOCK_TICK_RATE		(AT91CAP9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91X40)
-
-#define AT91X40_MASTER_CLOCK	40000000
-#define CLOCK_TICK_RATE		(AT91X40_MASTER_CLOCK)
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91/uncompress.h b/include/asm-arm/arch-at91/uncompress.h
deleted file mode 100644
index f5636a8f..0000000
--- a/include/asm-arm/arch-at91/uncompress.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * include/asm-arm/arch-at91/uncompress.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/io.h>
-#include <linux/atmel_serial.h>
-
-#if defined(CONFIG_AT91_EARLY_DBGU)
-#define UART_OFFSET (AT91_DBGU + AT91_BASE_SYS)
-#elif defined(CONFIG_AT91_EARLY_USART0)
-#define UART_OFFSET AT91_USART0
-#elif defined(CONFIG_AT91_EARLY_USART1)
-#define UART_OFFSET AT91_USART1
-#elif defined(CONFIG_AT91_EARLY_USART2)
-#define UART_OFFSET AT91_USART2
-#elif defined(CONFIG_AT91_EARLY_USART3)
-#define UART_OFFSET AT91_USART3
-#elif defined(CONFIG_AT91_EARLY_USART4)
-#define UART_OFFSET AT91_USART4
-#elif defined(CONFIG_AT91_EARLY_USART5)
-#define UART_OFFSET AT91_USART5
-#endif
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
-#ifdef UART_OFFSET
-	void __iomem *sys = (void __iomem *) UART_OFFSET;	/* physical address */
-
-	while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY))
-		barrier();
-	__raw_writel(c, sys + ATMEL_US_THR);
-#endif
-}
-
-static inline void flush(void)
-{
-#ifdef UART_OFFSET
-	void __iomem *sys = (void __iomem *) UART_OFFSET;	/* physical address */
-
-	/* wait for transmission to complete */
-	while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
-		barrier();
-#endif
-}
-
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
-
-#endif
diff --git a/include/asm-arm/arch-at91/vmalloc.h b/include/asm-arm/arch-at91/vmalloc.h
deleted file mode 100644
index bb05e70..0000000
--- a/include/asm-arm/arch-at91/vmalloc.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-at91/vmalloc.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END		(AT91_VIRT_BASE & PGDIR_MASK)
-
-#endif
diff --git a/include/asm-arm/arch-cl7500/debug-macro.S b/include/asm-arm/arch-cl7500/debug-macro.S
deleted file mode 100644
index 9a2b67d..0000000
--- a/include/asm-arm/arch-cl7500/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/include/asm-arm/arch-cl7500/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mov	\rx, #0xe0000000
-		orr	\rx, \rx, #0x00010000
-		orr	\rx, \rx, #0x00000be0
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-cl7500/dma.h b/include/asm-arm/arch-cl7500/dma.h
deleted file mode 100644
index 591ed25..0000000
--- a/include/asm-arm/arch-cl7500/dma.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/dma.h
- *
- * Copyright (C) 1999 Nexus Electronics Ltd.
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS		0xd0000000
-
-#define DMA_S0			0
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-cl7500/entry-macro.S b/include/asm-arm/arch-cl7500/entry-macro.S
deleted file mode 100644
index 5bd5555..0000000
--- a/include/asm-arm/arch-cl7500/entry-macro.S
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <asm/arch/hardware.h>
-#include <asm/hardware/entry-macro-iomd.S>
-
-	.equ	ioc_base_high, IOC_BASE & 0xff000000
-	.equ	ioc_base_low, IOC_BASE & 0x00ff0000
-
-	.macro  get_irqnr_preamble, base, tmp
-	mov	\base, #ioc_base_high		@ point at IOC
-	.if	ioc_base_low
-	orr	\base, \base, #ioc_base_low
-	.endif
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
diff --git a/include/asm-arm/arch-cl7500/hardware.h b/include/asm-arm/arch-cl7500/hardware.h
deleted file mode 100644
index 1adfd18..0000000
--- a/include/asm-arm/arch-cl7500/hardware.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/hardware.h
- *
- * Copyright (C) 1996-1999 Russell King.
- * Copyright (C) 1999 Nexus Electronics Ltd.
- *
- * This file contains the hardware definitions of the 
- * CL7500 evaluation board.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/arch/memory.h>
-#include <asm/hardware/iomd.h>
-
-#ifdef __ASSEMBLY__
-#define IOMEM(x) x
-#else
-#define IOMEM(x) ((void __iomem *)(x))
-#endif
-
-/*
- * What hardware must be present
- */
-#define HAS_IOMD
-#define HAS_VIDC20
-
-/* Hardware addresses of major areas.
- *  *_START is the physical address
- *  *_SIZE  is the size of the region
- *  *_BASE  is the virtual address
- */
-
-#define IO_START		0x03000000	/* I/O */
-#define IO_SIZE			0x01000000
-#define IO_BASE			IOMEM(0xe0000000)
-
-#define ISA_START		0x0c000000	/* ISA */
-#define ISA_SIZE		0x00010000
-#define ISA_BASE		0xe1000000
-
-#define FLASH_START		0x01000000	/* XXX */
-#define FLASH_SIZE		0x01000000
-#define FLASH_BASE		0xe2000000
-
-#define LED_START		0x0302B000
-#define LED_SIZE		0x00001000
-#define LED_BASE		0xe3000000
-#define LED_ADDRESS		(LED_BASE + 0xa00)
-
-/* Let's define SCREEN_START for CL7500, even though it's a lie. */
-#define SCREEN_START		0x02000000	/* VRAM */
-#define SCREEN_END		0xdfc00000
-#define SCREEN_BASE		0xdf800000
-
-#define VIDC_BASE		(void __iomem *)0xe0400000
-#define IOMD_BASE		IOMEM(0xe0200000)
-#define IOC_BASE		IOMEM(0xe0200000)
-#define FLOPPYDMA_BASE		IOMEM(0xe002a000)
-#define PCIO_BASE		IOMEM(0xe0010000)
-
-#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
-
-/* in/out bias for the ISA slot region */
-#define ISASLOT_IO		0x80400000
-
-#endif
diff --git a/include/asm-arm/arch-cl7500/io.h b/include/asm-arm/arch-cl7500/io.h
deleted file mode 100644
index 80f9b19..0000000
--- a/include/asm-arm/arch-cl7500/io.h
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/io.h
- *  from linux/include/asm-arm/arch-rpc/io.h
- *
- * Copyright (C) 1997 Russell King
- *
- * Modifications:
- *  06-Dec-1997	RMK	Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * GCC is totally crap at loading/storing data.  We try to persuade it
- * to do the right thing by using these whereever possible instead of
- * the above.
- */
-#define __arch_base_getb(b,o)			\
- ({						\
-	unsigned int v, r = (b);		\
-	__asm__ __volatile__(			\
-		"ldrb	%0, [%1, %2]"		\
-		: "=r" (v)			\
-		: "r" (r), "Ir" (o));		\
-	v;					\
- })
-
-#define __arch_base_getl(b,o)			\
- ({						\
-	unsigned int v, r = (b);		\
-	__asm__ __volatile__(			\
-		"ldr	%0, [%1, %2]"		\
-		: "=r" (v)			\
-		: "r" (r), "Ir" (o));		\
-	v;					\
- })
-
-#define __arch_base_putb(v,b,o)			\
- ({						\
-	unsigned int r = (b);			\
-	__asm__ __volatile__(			\
-		"strb	%0, [%1, %2]"		\
-		:				\
-		: "r" (v), "r" (r), "Ir" (o));	\
- })
-
-#define __arch_base_putl(v,b,o)			\
- ({						\
-	unsigned int r = (b);			\
-	__asm__ __volatile__(			\
-		"str	%0, [%1, %2]"		\
-		:				\
-		: "r" (v), "r" (r), "Ir" (o));	\
- })
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses.  PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
- * and are translated to the start of IO.  Note that all addresses are
- * shifted left!
- */
-#define __PORT_PCIO(x)	(!((x) & 0x80000000))
-
-/*
- * Dynamic IO functions - let the compiler
- * optimize the expressions
- */
-static inline void __outb (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"strb	%1, [%0, %2, lsl #2]	@ outb"
-	: "=&r" (temp)
-	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-static inline void __outw (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"str	%1, [%0, %2, lsl #2]	@ outw"
-	: "=&r" (temp)
-	: "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-static inline void __outl (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"str	%1, [%0, %2, lsl #2]	@ outl"
-	: "=&r" (temp)
-	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-#define DECLARE_DYN_IN(sz,fnsuffix,instr)					\
-static inline unsigned sz __in##fnsuffix (unsigned int port)		\
-{										\
-	unsigned long temp, value;						\
-	__asm__ __volatile__(							\
-	"tst	%2, #0x80000000\n\t"						\
-	"mov	%0, %4\n\t"							\
-	"addeq	%0, %0, %3\n\t"							\
-	"ldr" instr "	%1, [%0, %2, lsl #2]	@ in" #fnsuffix			\
-	: "=&r" (temp), "=r" (value)						\
-	: "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)		\
-	: "cc");								\
-	return (unsigned sz)value;						\
-}
-
-static inline unsigned int __ioaddr (unsigned int port)			\
-{										\
-	if (__PORT_PCIO(port))							\
-		return (unsigned int)(PCIO_BASE + (port << 2));			\
-	else									\
-		return (unsigned int)(IO_BASE + (port << 2));			\
-}
-
-#define DECLARE_IO(sz,fnsuffix,instr)	\
-	DECLARE_DYN_IN(sz,fnsuffix,instr)
-
-DECLARE_IO(char,b,"b")
-DECLARE_IO(short,w,"")
-DECLARE_IO(int,l,"")
-
-#undef DECLARE_IO
-#undef DECLARE_DYN_IN
-
-/*
- * Constant address IO functions
- *
- * These have to be macros for the 'J' constraint to work -
- * +/-4096 immediate operand.
- */
-#define __outbc(value,port)							\
-({										\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"strb	%0, [%1, %2]	@ outbc"				\
-		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"strb	%0, [%1, %2]	@ outbc"				\
-		: : "r" (value), "r" (IO_BASE), "r" ((port) << 2));		\
-})
-
-#define __inbc(port)								\
-({										\
-	unsigned char result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldrb	%0, [%1, %2]	@ inbc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldrb	%0, [%1, %2]	@ inbc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result;									\
-})
-
-#define __outwc(value,port)							\
-({										\
-	unsigned long v = value;						\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outwc"				\
-		: : "r" (v|v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2));	\
-	else									\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outwc"				\
-		: : "r" (v|v<<16), "r" (IO_BASE), "r" ((port) << 2));		\
-})
-
-#define __inwc(port)								\
-({										\
-	unsigned short result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inwc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inwc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result & 0xffff;							\
-})
-
-#define __outlc(value,port)							\
-({										\
-	unsigned long v = value;						\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outlc"				\
-		: : "r" (v), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outlc"				\
-		: : "r" (v), "r" (IO_BASE), "r" ((port) << 2));			\
-})
-
-#define __inlc(port)								\
-({										\
-	unsigned long result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inlc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inlc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result;									\
-})
-
-#define __ioaddrc(port)								\
-	(__PORT_PCIO((port)) ? PCIO_BASE + ((port) << 2) : IO_BASE + ((port) << 2))
-
-#define inb(p)	 	(__builtin_constant_p((p)) ? __inbc(p)    : __inb(p))
-#define inw(p)	 	(__builtin_constant_p((p)) ? __inwc(p)    : __inw(p))
-#define inl(p)	 	(__builtin_constant_p((p)) ? __inlc(p)    : __inl(p))
-#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
-#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
-#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
-#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
-/* the following macro is deprecated */
-#define ioaddr(port)			__ioaddr((port))
-
-#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
-#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
-
-#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
-#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
-
-/*
- * 1:1 mapping for ioremapped regions.
- */
-#define __mem_pci(x)	(x)
-
-#endif
diff --git a/include/asm-arm/arch-cl7500/irq.h b/include/asm-arm/arch-cl7500/irq.h
deleted file mode 100644
index 4b28633..0000000
--- a/include/asm-arm/arch-cl7500/irq.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-cl7500/irq.h
- *
- * Copyright (C) 1996 Russell King
- * Copyright (C) 1999, 2001 Nexus Electronics Ltd.
- *
- * Changelog:
- *   10-10-1996	RMK	Brought up to date with arch-sa110eval
- *   22-08-1998	RMK	Restructured IRQ routines
- *   11-08-1999	PJB	Created ARM7500 version, derived from RiscPC code
- */
-
-#include <asm/hardware/iomd.h>
-#include <asm/io.h>
-
-static inline int fixup_irq(unsigned int irq)
-{
-	if (irq == IRQ_ISA) {
-		int isabits = *((volatile unsigned int *)0xe002b700);
-		if (isabits == 0) {
-			printk("Spurious ISA IRQ!\n");
-			return irq;
-		}
-		irq = IRQ_ISA_BASE;
-		while (!(isabits & 1)) {
-			irq++;
-			isabits >>= 1;
-		}
-	}
-
-	return irq;
-}
diff --git a/include/asm-arm/arch-cl7500/irqs.h b/include/asm-arm/arch-cl7500/irqs.h
deleted file mode 100644
index f20996e..0000000
--- a/include/asm-arm/arch-cl7500/irqs.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/irqs.h
- *
- * Copyright (C) 1999 Nexus Electronics Ltd
- */
-
-#define IRQ_INT2		0
-#define IRQ_INT1		2
-#define IRQ_VSYNCPULSE		3
-#define IRQ_POWERON		4
-#define IRQ_TIMER0		5
-#define IRQ_TIMER1		6
-#define IRQ_FORCE		7
-#define IRQ_INT8		8
-#define IRQ_ISA			9
-#define IRQ_INT6		10
-#define IRQ_INT5		11
-#define IRQ_INT4		12
-#define IRQ_INT3		13
-#define IRQ_KEYBOARDTX		14
-#define IRQ_KEYBOARDRX		15
-
-#define IRQ_DMA0		16
-#define IRQ_DMA1		17
-#define IRQ_DMA2		18
-#define IRQ_DMA3		19
-#define IRQ_DMAS0		20
-#define IRQ_DMAS1		21
-
-#define IRQ_IOP0		24
-#define IRQ_IOP1		25
-#define IRQ_IOP2		26
-#define IRQ_IOP3		27
-#define IRQ_IOP4		28
-#define IRQ_IOP5		29
-#define IRQ_IOP6		30
-#define IRQ_IOP7		31
-
-#define IRQ_MOUSERX		40
-#define IRQ_MOUSETX		41
-#define IRQ_ADC			42
-#define IRQ_EVENT1		43
-#define IRQ_EVENT2		44
-
-#define IRQ_ISA_BASE		48
-#define IRQ_ISA_3		48
-#define IRQ_ISA_4		49
-#define IRQ_ISA_5		50
-#define IRQ_ISA_7		51
-#define IRQ_ISA_9		52
-#define IRQ_ISA_10		53
-#define IRQ_ISA_11		54
-#define IRQ_ISA_14		55	
-
-#define FIQ_INT9		0
-#define FIQ_INT5		1
-#define FIQ_INT6		4
-#define FIQ_INT8		6
-#define FIQ_FORCE		7
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START		64
-
-#define IRQ_TIMER		IRQ_TIMER0
diff --git a/include/asm-arm/arch-cl7500/memory.h b/include/asm-arm/arch-cl7500/memory.h
deleted file mode 100644
index 3178140..0000000
--- a/include/asm-arm/arch-cl7500/memory.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/memory.h
- *
- * Copyright (c) 1996,1997,1998 Russell King.
- *
- * Changelog:
- *  20-Oct-1996	RMK	Created
- *  31-Dec-1997	RMK	Fixed definitions to reduce warnings
- *  11-Jan-1998	RMK	Uninlined to reduce hits on cache
- *  08-Feb-1998	RMK	Added __virt_to_bus and __bus_to_virt
- *  21-Mar-1999	RMK	Renamed to memory.h
- *		RMK	Added TASK_SIZE and PAGE_OFFSET
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x10000000)
-
-/*
- * These are exactly the same on the RiscPC as the
- * physical memory view.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
- * Cache flushing area - ROM
- */
-#define FLUSH_BASE_PHYS		0x00000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/include/asm-arm/arch-cl7500/system.h b/include/asm-arm/arch-cl7500/system.h
deleted file mode 100644
index a9505d6..0000000
--- a/include/asm-arm/arch-cl7500/system.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/system.h
- *
- * Copyright (c) 1999 Nexus Electronics Ltd.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/hardware/iomd.h>
-#include <asm/io.h>
-
-static inline void arch_idle(void)
-{
-	iomd_writeb(0, IOMD_SUSMODE);
-}
-
-#define arch_reset(mode)			\
-	do {					\
-		iomd_writeb(0, IOMD_ROMCR0);	\
-		cpu_reset(0);			\
-	} while (0)
-
-#endif
diff --git a/include/asm-arm/arch-cl7500/timex.h b/include/asm-arm/arch-cl7500/timex.h
deleted file mode 100644
index 8a4175f..0000000
--- a/include/asm-arm/arch-cl7500/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/timex.h
- *
- * CL7500 architecture timex specifications
- *
- * Copyright (C) 1999 Nexus Electronics Ltd
- */
-
-/*
- * On the ARM7500, the clock ticks at 2MHz.
- */
-#define CLOCK_TICK_RATE		2000000
-
diff --git a/include/asm-arm/arch-cl7500/uncompress.h b/include/asm-arm/arch-cl7500/uncompress.h
deleted file mode 100644
index c437e0c..0000000
--- a/include/asm-arm/arch-cl7500/uncompress.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/uncompress.h
- *
- * Copyright (C) 1999, 2000 Nexus Electronics Ltd.
- */
-#define BASE 0x03010000
-#define SERBASE (BASE + (0x2f8 << 2))
-
-static inline void putc(char c)
-{
-	while (!(*((volatile unsigned int *)(SERBASE + 0x14)) & 0x20))
-		barrier();
-
-	*((volatile unsigned int *)(SERBASE)) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void arch_decomp_setup(void)
-{
-	int baud = 3686400 / (9600 * 32);
-
-	*((volatile unsigned int *)(SERBASE + 0xC)) = 0x80;
-	*((volatile unsigned int *)(SERBASE + 0x0)) = baud & 0xff;
-	*((volatile unsigned int *)(SERBASE + 0x4)) = (baud & 0xff00) >> 8;
-	*((volatile unsigned int *)(SERBASE + 0xC)) = 3; /* 8 bits */
-	*((volatile unsigned int *)(SERBASE + 0x10)) = 3; /* DTR, RTS */
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-cl7500/vmalloc.h b/include/asm-arm/arch-cl7500/vmalloc.h
deleted file mode 100644
index ba8d7a8..0000000
--- a/include/asm-arm/arch-cl7500/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/vmalloc.h
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x1c000000)
diff --git a/include/asm-arm/arch-clps711x/debug-macro.S b/include/asm-arm/arch-clps711x/debug-macro.S
deleted file mode 100644
index bc0a576..0000000
--- a/include/asm-arm/arch-clps711x/debug-macro.S
+++ /dev/null
@@ -1,46 +0,0 @@
-/* linux/include/asm-arm/arch-clps711x/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <asm/hardware/clps7111.h>
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #CLPS7111_PHYS_BASE
-		movne	\rx, #CLPS7111_VIRT_BASE
-#ifndef CONFIG_DEBUG_CLPS711X_UART2
-		add	\rx, \rx, #0x0000	@ UART1
-#else
-		add	\rx, \rx, #0x1000	@ UART2
-#endif
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x0480]	@ UARTDR
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
-		tst	\rd, #1 << 11		@ UBUSYx
-		bne	1001b
-		.endm
-
-		.macro	busyuart,rd,rx
-		tst	\rx, #0x1000		@ UART2 does not have CTS here
-		bne	1002f
-1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
-		tst	\rd, #1 << 8		@ CTS
-		bne	1001b
-1002:
-		.endm
-
diff --git a/include/asm-arm/arch-clps711x/dma.h b/include/asm-arm/arch-clps711x/dma.h
deleted file mode 100644
index 6109979..0000000
--- a/include/asm-arm/arch-clps711x/dma.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-clps711x/entry-macro.S b/include/asm-arm/arch-clps711x/entry-macro.S
deleted file mode 100644
index 3554887..0000000
--- a/include/asm-arm/arch-clps711x/entry-macro.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * include/asm-arm/arch-clps711x/entry-macro.S
- *
- * Low-level IRQ helper macros for CLPS711X-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-#include <asm/hardware/clps7111.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro	get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	arch_ret_to_user, tmp1, tmp2
-		.endm
-
-#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1)
-#error INTSR stride != INTMR stride
-#endif
-
-		.macro	get_irqnr_and_base, irqnr, stat, base, mask
-		mov	\base, #CLPS7111_BASE
-		ldr	\stat, [\base, #INTSR1]
-		ldr	\mask, [\base, #INTMR1]
-		mov	\irqnr, #4
-		mov	\mask, \mask, lsl #16
-		and	\stat, \stat, \mask, lsr #16
-		movs	\stat, \stat, lsr #4
-		bne	1001f
-
-		add	\base, \base, #INTSR2 - INTSR1
-		ldr	\stat, [\base, #INTSR1]
-		ldr	\mask, [\base, #INTMR1]
-		mov	\irqnr, #16
-		mov	\mask, \mask, lsl #16
-		and	\stat, \stat, \mask, lsr #16
-
-1001:		tst	\stat, #255
-		addeq	\irqnr, \irqnr, #8
-		moveq	\stat, \stat, lsr #8
-		tst	\stat, #15
-		addeq	\irqnr, \irqnr, #4
-		moveq	\stat, \stat, lsr #4
-		tst	\stat, #3
-		addeq	\irqnr, \irqnr, #2
-		moveq	\stat, \stat, lsr #2
-		tst	\stat, #1
-		addeq	\irqnr, \irqnr, #1
-		moveq	\stat, \stat, lsr #1
-		tst	\stat, #1			@ bit 0 should be set
-		.endm
-
-
diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h
deleted file mode 100644
index 0fdbe72..0000000
--- a/include/asm-arm/arch-clps711x/hardware.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/hardware.h
- *
- *  This file contains the hardware definitions of the Prospector P720T.
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-
-#define CLPS7111_VIRT_BASE	0xff000000
-#define CLPS7111_BASE		CLPS7111_VIRT_BASE
-
-/*
- * The physical addresses that the external chip select signals map to is
- * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212
- * processors.  CONFIG_EP72XX_BOOT_ROM is only available if these
- * processors are in use.
- */
-#ifndef CONFIG_EP72XX_ROM_BOOT
-#define CS0_PHYS_BASE		(0x00000000)
-#define CS1_PHYS_BASE		(0x10000000)
-#define CS2_PHYS_BASE		(0x20000000)
-#define CS3_PHYS_BASE		(0x30000000)
-#define CS4_PHYS_BASE		(0x40000000)
-#define CS5_PHYS_BASE		(0x50000000)
-#define CS6_PHYS_BASE		(0x60000000)
-#define CS7_PHYS_BASE		(0x70000000)
-#else
-#define CS0_PHYS_BASE		(0x70000000)
-#define CS1_PHYS_BASE		(0x60000000)
-#define CS2_PHYS_BASE		(0x50000000)
-#define CS3_PHYS_BASE		(0x40000000)
-#define CS4_PHYS_BASE		(0x30000000)
-#define CS5_PHYS_BASE		(0x20000000)
-#define CS6_PHYS_BASE		(0x10000000)
-#define CS7_PHYS_BASE		(0x00000000)
-#endif
-
-#if defined (CONFIG_ARCH_EP7211)
-
-#define EP7211_VIRT_BASE	CLPS7111_VIRT_BASE
-#define EP7211_BASE		CLPS7111_VIRT_BASE
-#include <asm/hardware/ep7211.h>
-
-#elif defined (CONFIG_ARCH_EP7212)
-
-#define EP7212_VIRT_BASE	CLPS7111_VIRT_BASE
-#define EP7212_BASE		CLPS7111_VIRT_BASE
-#include <asm/hardware/ep7212.h>
-
-#endif
-
-#define SYSPLD_VIRT_BASE	0xfe000000
-#define SYSPLD_BASE		SYSPLD_VIRT_BASE
-
-#ifndef __ASSEMBLER__
-
-#define PCIO_BASE		IO_BASE
-
-#endif
-
-
-#if  defined (CONFIG_ARCH_AUTCPU12)
-
-#define  CS89712_VIRT_BASE	CLPS7111_VIRT_BASE
-#define  CS89712_BASE		CLPS7111_VIRT_BASE
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-#include <asm/hardware/cs89712.h>
-
-#endif
-
-
-#if defined (CONFIG_ARCH_CDB89712)
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-#include <asm/hardware/cs89712.h>
-
-/* dynamic ioremap() areas */
-#define FLASH_START      0x00000000
-#define FLASH_SIZE       0x800000
-#define FLASH_WIDTH      4
-
-#define SRAM_START       0x60000000
-#define SRAM_SIZE        0xc000
-#define SRAM_WIDTH       4
-
-#define BOOTROM_START    0x70000000
-#define BOOTROM_SIZE     0x80
-#define BOOTROM_WIDTH    4
-
-
-/* static cdb89712_map_io() areas */
-#define REGISTER_START   0x80000000
-#define REGISTER_SIZE    0x4000
-#define REGISTER_BASE    0xff000000
-
-#define ETHER_START      0x20000000
-#define ETHER_SIZE       0x1000
-#define ETHER_BASE       0xfe000000
-
-#endif
-
-
-#if defined (CONFIG_ARCH_EDB7211)
-
-/*
- * The extra 8 lines of the keyboard matrix are wired to chip select 3 (nCS3) 
- * and repeat across it. This is the mapping for it.
- *
- * In jumpered boot mode, nCS3 is mapped to 0x4000000, not 0x3000000. This 
- * was cause for much consternation and headscratching. This should probably
- * be made a compile/run time kernel option.
- */
-#define EP7211_PHYS_EXTKBD		CS3_PHYS_BASE	/* physical */
-
-#define EP7211_VIRT_EXTKBD		(0xfd000000)	/* virtual */
-
-
-/*
- * The CS8900A ethernet chip has its I/O registers wired to chip select 2 
- * (nCS2). This is the mapping for it.
- *
- * In jumpered boot mode, nCS2 is mapped to 0x5000000, not 0x2000000. This 
- * was cause for much consternation and headscratching. This should probably
- * be made a compile/run time kernel option.
- */
-#define EP7211_PHYS_CS8900A		CS2_PHYS_BASE	/* physical */
-
-#define EP7211_VIRT_CS8900A		(0xfc000000)	/* virtual */
-
-
-/*
- * The two flash banks are wired to chip selects 0 and 1. This is the mapping
- * for them.
- *
- * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
- * in jumpered boot mode.
- */
-#define EP7211_PHYS_FLASH1		CS0_PHYS_BASE	/* physical */
-#define EP7211_PHYS_FLASH2		CS1_PHYS_BASE	/* physical */
-
-#define EP7211_VIRT_FLASH1		(0xfa000000)	/* virtual */
-#define EP7211_VIRT_FLASH2		(0xfb000000)	/* virtual */
-
-#endif /* CONFIG_ARCH_EDB7211 */
-
-
-/*
- * Relevant bits in port D, which controls power to the various parts of
- * the LCD on the EDB7211.
- */
-#define EDB_PD1_LCD_DC_DC_EN	(1<<1)
-#define EDB_PD2_LCDEN		(1<<2)
-#define EDB_PD3_LCDBL		(1<<3)
-
-
-#if defined (CONFIG_ARCH_CEIVA)
-
-#define  CEIVA_VIRT_BASE	CLPS7111_VIRT_BASE
-#define  CEIVA_BASE		CLPS7111_VIRT_BASE
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-
-
-/*
- * The two flash banks are wired to chip selects 0 and 1. This is the mapping
- * for them.
- *
- * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
- * in jumpered boot mode.
- */
-#define CEIVA_PHYS_FLASH1	CS0_PHYS_BASE	/* physical */
-#define CEIVA_PHYS_FLASH2	CS1_PHYS_BASE	/* physical */
-
-#define CEIVA_VIRT_FLASH1	(0xfa000000)	/* virtual */
-#define CEIVA_VIRT_FLASH2	(0xfb000000)	/* virtual */
-
-#define CEIVA_FLASH_SIZE        0x100000
-#define CEIVA_FLASH_WIDTH       2
-
-#define SRAM_START       0x60000000
-#define SRAM_SIZE        0xc000
-#define SRAM_WIDTH       4
-
-#define BOOTROM_START    0x70000000
-#define BOOTROM_SIZE     0x80
-#define BOOTROM_WIDTH    4
-
-/*
- * SED1355 LCD controller
- */
-#define CEIVA_PHYS_SED1355	CS2_PHYS_BASE
-#define CEIVA_VIRT_SED1355	(0xfc000000)
-
-/*
- * Relevant bits in port D, which controls power to the various parts of
- * the LCD on the Ceiva Photo Max, and reset to the LCD controller.
- */
-
-// Reset line to SED1355 (must be high to operate)
-#define CEIVA_PD1_LCDRST	(1<<1)
-// LCD panel enable (set to one, to enable LCD)
-#define CEIVA_PD4_LCDEN		(1<<4)
-// Backlight (set to one, to turn on backlight
-#define CEIVA_PD5_LCDBL		(1<<5)
-
-/*
- * Relevant bits in port B, which report the status of the buttons.
- */
-
-// White button
-#define CEIVA_PB4_WHT_BTN	(1<<4)
-// Black button
-#define CEIVA_PB0_BLK_BTN	(1<<0)
-#endif // #if defined (CONFIG_ARCH_CEIVA)
-
-#endif
diff --git a/include/asm-arm/arch-clps711x/io.h b/include/asm-arm/arch-clps711x/io.h
deleted file mode 100644
index 2b84dac..0000000
--- a/include/asm-arm/arch-clps711x/io.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/io.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-/*
- * We don't support ins[lb]/outs[lb].  Make them fault.
- */
-#define __raw_readsb(p,d,l)	do { *(int *)0 = 0; } while (0)
-#define __raw_readsl(p,d,l)	do { *(int *)0 = 0; } while (0)
-#define __raw_writesb(p,d,l)	do { *(int *)0 = 0; } while (0)
-#define __raw_writesl(p,d,l)	do { *(int *)0 = 0; } while (0)
-
-#endif
diff --git a/include/asm-arm/arch-clps711x/irqs.h b/include/asm-arm/arch-clps711x/irqs.h
deleted file mode 100644
index 76025dc..0000000
--- a/include/asm-arm/arch-clps711x/irqs.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/irqs.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * Interrupts from INTSR1
- */
-#define IRQ_CSINT			4
-#define IRQ_EINT1			5
-#define IRQ_EINT2			6
-#define IRQ_EINT3			7
-#define IRQ_TC1OI			8
-#define IRQ_TC2OI			9
-#define IRQ_RTCMI			10
-#define IRQ_TINT			11
-#define IRQ_UTXINT1			12
-#define IRQ_URXINT1			13
-#define IRQ_UMSINT			14
-#define IRQ_SSEOTI			15
-
-#define INT1_IRQS			(0x0000fff0)
-#define INT1_ACK_IRQS			(0x00004f10)
-
-/*
- * Interrupts from INTSR2
- */
-#define IRQ_KBDINT			(16+0)	/* bit 0 */
-#define IRQ_SS2RX			(16+1)	/* bit 1 */
-#define IRQ_SS2TX			(16+2)	/* bit 2 */
-#define IRQ_UTXINT2			(16+12)	/* bit 12 */
-#define IRQ_URXINT2			(16+13)	/* bit 13 */
-
-#define INT2_IRQS			(0x30070000)
-#define INT2_ACK_IRQS			(0x00010000)
-
-#define NR_IRQS                         30
-
diff --git a/include/asm-arm/arch-clps711x/memory.h b/include/asm-arm/arch-clps711x/memory.h
deleted file mode 100644
index 42768cc..0000000
--- a/include/asm-arm/arch-clps711x/memory.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/memory.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0xc0000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-
-#if defined(CONFIG_ARCH_CDB89712)
-
-#define __virt_to_bus(x)	(x)
-#define __bus_to_virt(x)	(x)
-
-#elif defined (CONFIG_ARCH_AUTCPU12)
-
-#define __virt_to_bus(x)	(x)
-#define __bus_to_virt(x)	(x)
-
-#else
-
-#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
-#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
-
-#endif
-
-
-/*
- * Like the SA1100, the EDB7211 has a large gap between physical RAM
- * banks.  In 2.2, the Psion (CL-PS7110) port added custom support for
- * discontiguous physical memory.  In 2.4, we can use the standard
- * Linux NUMA support.
- *
- * This is not necessary for EP7211 implementations with only one used
- * memory bank.  For those systems, simply undefine CONFIG_DISCONTIGMEM.
- */
-
-/*
- * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211
- * uses only one of the two banks (bank #1).  However, even within
- * bank #1, memory is discontiguous.
- *
- * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between
- * them, so we use 24 for the node max shift to get 16MB node sizes.
- */
-
-/*
- * Because of the wide memory address space between physical RAM banks on the 
- * SA1100, it's much more convenient to use Linux's NUMA support to implement
- * our memory map representation.  Assuming all memory nodes have equal access 
- * characteristics, we then have generic discontiguous memory support.
- *
- * Of course, all this isn't mandatory for SA1100 implementations with only
- * one used memory bank.  For those, simply undefine CONFIG_DISCONTIGMEM.
- *
- * The nodes are matched with the physical memory bank addresses which are 
- * incidentally the same as virtual addresses.
- * 
- * 	node 0:  0xc0000000 - 0xc7ffffff
- * 	node 1:  0xc8000000 - 0xcfffffff
- * 	node 2:  0xd0000000 - 0xd7ffffff
- * 	node 3:  0xd8000000 - 0xdfffffff
- */
-#define NODE_MEM_SIZE_BITS	24
-
-#endif
-
diff --git a/include/asm-arm/arch-clps711x/syspld.h b/include/asm-arm/arch-clps711x/syspld.h
deleted file mode 100644
index 960578a..0000000
--- a/include/asm-arm/arch-clps711x/syspld.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/syspld.h
- *
- *  System Control PLD register definitions.
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSPLD_H
-#define __ASM_ARCH_SYSPLD_H
-
-#define SYSPLD_PHYS_BASE	(0x10000000)
-
-#ifndef __ASSEMBLY__
-#include <asm/types.h>
-
-#define SYSPLD_REG(type,off)	(*(volatile type *)(SYSPLD_BASE + off))
-#else
-#define SYSPLD_REG(type,off)	(off)
-#endif
-
-#define PLD_INT		SYSPLD_REG(u32, 0x000000)
-#define PLD_INT_PENIRQ		(1 << 5)
-#define PLD_INT_UCB_IRQ		(1 << 1)
-#define PLD_INT_KBD_ATN		(1 << 0)	/* EINT1 */
-
-#define PLD_PWR		SYSPLD_REG(u32, 0x000004)
-#define PLD_PWR_EXT		(1 << 5)
-#define PLD_PWR_MODE		(1 << 4)	/* 1 = PWM, 0 = PFM */
-#define PLD_S4_ON		(1 << 3)	/* LCD bias voltage enable */
-#define PLD_S3_ON		(1 << 2)	/* LCD backlight enable */
-#define PLD_S2_ON		(1 << 1)	/* LCD 3V3 supply enable */
-#define PLD_S1_ON		(1 << 0)	/* LCD 3V supply enable */
-
-#define PLD_KBD		SYSPLD_REG(u32, 0x000008)
-#define PLD_KBD_WAKE		(1 << 1)
-#define PLD_KBD_EN		(1 << 0)
-
-#define PLD_SPI		SYSPLD_REG(u32, 0x00000c)
-#define PLD_SPI_EN		(1 << 0)
-
-#define PLD_IO		SYSPLD_REG(u32, 0x000010)
-#define PLD_IO_BOOTSEL		(1 << 6)	/* boot sel switch */
-#define PLD_IO_USER		(1 << 5)	/* user defined switch */
-#define PLD_IO_LED3		(1 << 4)
-#define PLD_IO_LED2		(1 << 3)
-#define PLD_IO_LED1		(1 << 2)
-#define PLD_IO_LED0		(1 << 1)
-#define PLD_IO_LEDEN		(1 << 0)
-
-#define PLD_IRDA	SYSPLD_REG(u32, 0x000014)
-#define PLD_IRDA_EN		(1 << 0)
-
-#define PLD_COM2	SYSPLD_REG(u32, 0x000018)
-#define PLD_COM2_EN		(1 << 0)
-
-#define PLD_COM1	SYSPLD_REG(u32, 0x00001c)
-#define PLD_COM1_EN		(1 << 0)
-
-#define PLD_AUD		SYSPLD_REG(u32, 0x000020)
-#define PLD_AUD_DIV1		(1 << 6)
-#define PLD_AUD_DIV0		(1 << 5)
-#define PLD_AUD_CLK_SEL1	(1 << 4)
-#define PLD_AUD_CLK_SEL0	(1 << 3)
-#define PLD_AUD_MIC_PWR		(1 << 2)
-#define PLD_AUD_MIC_GAIN	(1 << 1)
-#define PLD_AUD_CODEC_EN	(1 << 0)
-
-#define PLD_CF		SYSPLD_REG(u32, 0x000024)
-#define PLD_CF2_SLEEP		(1 << 5)
-#define PLD_CF1_SLEEP		(1 << 4)
-#define PLD_CF2_nPDREQ		(1 << 3)
-#define PLD_CF1_nPDREQ		(1 << 2)
-#define PLD_CF2_nIRQ		(1 << 1)
-#define PLD_CF1_nIRQ		(1 << 0)
-
-#define PLD_SDC		SYSPLD_REG(u32, 0x000028)
-#define PLD_SDC_INT_EN		(1 << 2)
-#define PLD_SDC_WP		(1 << 1)
-#define PLD_SDC_CD		(1 << 0)
-
-#define PLD_FPGA	SYSPLD_REG(u32, 0x00002c)
-
-#define PLD_CODEC	SYSPLD_REG(u32, 0x400000)
-#define PLD_CODEC_IRQ3		(1 << 4)
-#define PLD_CODEC_IRQ2		(1 << 3)
-#define PLD_CODEC_IRQ1		(1 << 2)
-#define PLD_CODEC_EN		(1 << 0)
-
-#define PLD_BRITE	SYSPLD_REG(u32, 0x400004)
-#define PLD_BRITE_UP		(1 << 1)
-#define PLD_BRITE_DN		(1 << 0)
-
-#define PLD_LCDEN	SYSPLD_REG(u32, 0x400008)
-#define PLD_LCDEN_EN		(1 << 0)
-
-#define PLD_ID		SYSPLD_REG(u32, 0x40000c)
-
-#define PLD_TCH		SYSPLD_REG(u32, 0x400010)
-#define PLD_TCH_PENIRQ		(1 << 1)
-#define PLD_TCH_EN		(1 << 0)
-
-#define PLD_GPIO	SYSPLD_REG(u32, 0x400014)
-#define PLD_GPIO2		(1 << 2)
-#define PLD_GPIO1		(1 << 1)
-#define PLD_GPIO0		(1 << 0)
-
-#endif
diff --git a/include/asm-arm/arch-clps711x/system.h b/include/asm-arm/arch-clps711x/system.h
deleted file mode 100644
index 1f56177..0000000
--- a/include/asm-arm/arch-clps711x/system.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/system.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/hardware/clps7111.h>
-#include <asm/io.h>
-
-static inline void arch_idle(void)
-{
-	clps_writel(1, HALT);
-	__asm__ __volatile__(
-	"mov	r0, r0\n\
-	mov	r0, r0");
-}
-
-static inline void arch_reset(char mode)
-{
-	cpu_reset(0);
-}
-
-#endif
diff --git a/include/asm-arm/arch-clps711x/time.h b/include/asm-arm/arch-clps711x/time.h
deleted file mode 100644
index 5edaae1..0000000
--- a/include/asm-arm/arch-clps711x/time.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/time.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <asm/leds.h>
-#include <asm/hardware/clps7111.h>
-
-extern void clps711x_setup_timer(void);
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-p720t_timer_interrupt(int irq, void *dev_id)
-{
-	struct pt_regs *regs = get_irq_regs();
-	do_leds();
-	do_timer(1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(regs));
-#endif
-	do_profile(regs);
-	return IRQ_HANDLED;
-}
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-void __init time_init(void)
-{
-	clps711x_setup_timer();
-	timer_irq.handler = p720t_timer_interrupt;
-	setup_irq(IRQ_TC2OI, &timer_irq);
-}
diff --git a/include/asm-arm/arch-clps711x/timex.h b/include/asm-arm/arch-clps711x/timex.h
deleted file mode 100644
index dcbb381..0000000
--- a/include/asm-arm/arch-clps711x/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/timex.h
- *
- *  Prospector 720T architecture timex specifications
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define CLOCK_TICK_RATE 512000
diff --git a/include/asm-arm/arch-clps711x/uncompress.h b/include/asm-arm/arch-clps711x/uncompress.h
deleted file mode 100644
index 8c5684a..0000000
--- a/include/asm-arm/arch-clps711x/uncompress.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/uncompress.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/hardware/clps7111.h>
-
-#undef CLPS7111_BASE
-#define CLPS7111_BASE CLPS7111_PHYS_BASE
-
-#define __raw_readl(p)		(*(unsigned long *)(p))
-#define __raw_writel(v,p)	(*(unsigned long *)(p) = (v))
-
-#ifdef CONFIG_DEBUG_CLPS711X_UART2
-#define SYSFLGx	SYSFLG2
-#define UARTDRx	UARTDR2
-#else
-#define SYSFLGx	SYSFLG1
-#define UARTDRx	UARTDR1
-#endif
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	while (clps_readl(SYSFLGx) & SYSFLG_UTXFF)
-		barrier();
-	clps_writel(c, UARTDRx);
-}
-
-static inline void flush(void)
-{
-	while (clps_readl(SYSFLGx) & SYSFLG_UBUSY)
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-clps711x/vmalloc.h b/include/asm-arm/arch-clps711x/vmalloc.h
deleted file mode 100644
index a5dfe96..0000000
--- a/include/asm-arm/arch-clps711x/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/vmalloc.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-davinci/clock.h b/include/asm-arm/arch-davinci/clock.h
deleted file mode 100644
index cc168b7..0000000
--- a/include/asm-arm/arch-davinci/clock.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-arm/arch-davinci/clock.h
- *
- * Clock control driver for DaVinci - header file
- *
- * Authors: Vladimir Barinov <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_DAVINCI_CLOCK_H
-#define __ASM_ARCH_DAVINCI_CLOCK_H
-
-struct clk;
-
-extern int clk_register(struct clk *clk);
-extern void clk_unregister(struct clk *clk);
-extern int davinci_clk_init(void);
-
-#endif
diff --git a/include/asm-arm/arch-davinci/entry-macro.S b/include/asm-arm/arch-davinci/entry-macro.S
deleted file mode 100644
index 3ebfcc5..0000000
--- a/include/asm-arm/arch-davinci/entry-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Low-level IRQ helper macros for TI DaVinci-based platforms
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <asm/arch/io.h>
-#include <asm/arch/irqs.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr \tmp, [\base, #0x14]
-		mov \tmp, \tmp, lsr #2
-		sub \irqnr, \tmp, #1
-		cmp \tmp, #0
-		.endm
-
-		.macro	irq_prio_table
-		.endm
diff --git a/include/asm-arm/arch-davinci/gpio.h b/include/asm-arm/arch-davinci/gpio.h
deleted file mode 100644
index 54fda73..0000000
--- a/include/asm-arm/arch-davinci/gpio.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * TI DaVinci GPIO Support
- *
- * Copyright (c) 2006 David Brownell
- * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef	__DAVINCI_GPIO_H
-#define	__DAVINCI_GPIO_H
-
-#include <linux/io.h>
-#include <asm/arch/hardware.h>
-
-/*
- * basic gpio routines
- *
- * board-specific init should be done by arch/.../.../board-XXX.c (maybe
- * initializing banks together) rather than boot loaders; kexec() won't
- * go through boot loaders.
- *
- * the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
- * used as gpios, not with other peripherals.
- *
- * GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation, and maybe
- * for later updates, code should write GPIO(N) or:
- *  - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
- *  - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
- *
- * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
- * for now, that's != GPIO(N)
- */
-#define	GPIO(X)		(X)		/* 0 <= X <= 70 */
-#define	GPIOV18(X)	(X)		/* 1.8V i/o; 0 <= X <= 53 */
-#define	GPIOV33(X)	((X)+54)	/* 3.3V i/o; 0 <= X <= 17 */
-
-struct gpio_controller {
-	u32	dir;
-	u32	out_data;
-	u32	set_data;
-	u32	clr_data;
-	u32	in_data;
-	u32	set_rising;
-	u32	clr_rising;
-	u32	set_falling;
-	u32	clr_falling;
-	u32	intstat;
-};
-
-/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
- * with constant parameters; or in outlined code they execute at runtime.
- *
- * You'd access the controller directly when reading or writing more than
- * one gpio value at a time, and to support wired logic where the value
- * being driven by the cpu need not match the value read back.
- *
- * These are NOT part of the cross-platform GPIO interface
- */
-static inline struct gpio_controller *__iomem
-__gpio_to_controller(unsigned gpio)
-{
-	void *__iomem ptr;
-
-	if (gpio < 32)
-		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
-	else if (gpio < 64)
-		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
-	else if (gpio < DAVINCI_N_GPIO)
-		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
-	else
-		ptr = NULL;
-	return ptr;
-}
-
-static inline u32 __gpio_mask(unsigned gpio)
-{
-	return 1 << (gpio % 32);
-}
-
-/* The get/set/clear functions will inline when called with constant
- * parameters, for low-overhead bitbanging.  Illegal constant parameters
- * cause link-time errors.
- *
- * Otherwise, calls with variable parameters use outlined functions.
- */
-extern int __error_inval_gpio(void);
-
-extern void __gpio_set(unsigned gpio, int value);
-extern int __gpio_get(unsigned gpio);
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(value)) {
-		struct gpio_controller	*__iomem g;
-		u32			mask;
-
-		if (gpio >= DAVINCI_N_GPIO)
-			__error_inval_gpio();
-
-		g = __gpio_to_controller(gpio);
-		mask = __gpio_mask(gpio);
-		if (value)
-			__raw_writel(mask, &g->set_data);
-		else
-			__raw_writel(mask, &g->clr_data);
-		return;
-	}
-
-	__gpio_set(gpio, value);
-}
-
-/* Returns zero or nonzero; works for gpios configured as inputs OR
- * as outputs.
- *
- * NOTE: changes in reported values are synchronized to the GPIO clock.
- * This is most easily seen after calling gpio_set_value() and then immediatly
- * gpio_get_value(), where the gpio_get_value() would return the old value
- * until the GPIO clock ticks and the new value gets latched.
- */
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	struct gpio_controller *__iomem g;
-
-	if (!__builtin_constant_p(gpio))
-		return __gpio_get(gpio);
-
-	if (gpio >= DAVINCI_N_GPIO)
-		return __error_inval_gpio();
-
-	g = __gpio_to_controller(gpio);
-	return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data));
-}
-
-/* powerup default direction is IN */
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-
-#include <asm-generic/gpio.h>	/* cansleep wrappers */
-
-extern int gpio_request(unsigned gpio, const char *tag);
-extern void gpio_free(unsigned gpio);
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return DAVINCI_N_AINTC_IRQ + gpio;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq - DAVINCI_N_AINTC_IRQ;
-}
-
-#endif				/* __DAVINCI_GPIO_H */
diff --git a/include/asm-arm/arch-davinci/serial.h b/include/asm-arm/arch-davinci/serial.h
deleted file mode 100644
index ed418ef..0000000
--- a/include/asm-arm/arch-davinci/serial.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * DaVinci serial device definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-#include <asm/arch/io.h>
-
-#define DAVINCI_UART0_BASE   (IO_PHYS + 0x20000)
-#define DAVINCI_UART1_BASE   (IO_PHYS + 0x20400)
-#define DAVINCI_UART2_BASE   (IO_PHYS + 0x20800)
-
-#endif /* __ASM_ARCH_SERIAL_H */
diff --git a/include/asm-arm/arch-davinci/system.h b/include/asm-arm/arch-davinci/system.h
deleted file mode 100644
index 6713e4a..0000000
--- a/include/asm-arm/arch-davinci/system.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * DaVinci system defines
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-
-extern void davinci_watchdog_reset(void);
-
-static void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static void arch_reset(char mode)
-{
-	davinci_watchdog_reset();
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/include/asm-arm/arch-davinci/uncompress.h b/include/asm-arm/arch-davinci/uncompress.h
deleted file mode 100644
index f6d1570..0000000
--- a/include/asm-arm/arch-davinci/uncompress.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Serial port stubs for kernel decompress status messages
- *
- *  Author:     Anant Gole
- * (C) Copyright (C) 2006, Texas Instruments, Inc
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-#include <asm/arch/serial.h>
-
-/* PORT_16C550A, in polled non-fifo mode */
-
-static void putc(char c)
-{
-	volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
-
-	while (!(uart[UART_LSR] & UART_LSR_THRE))
-		barrier();
-	uart[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-	volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
-	while (!(uart[UART_LSR] & UART_LSR_THRE))
-		barrier();
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-davinci/vmalloc.h b/include/asm-arm/arch-davinci/vmalloc.h
deleted file mode 100644
index 9b47fa8..0000000
--- a/include/asm-arm/arch-davinci/vmalloc.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * DaVinci vmalloc definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <asm/memory.h>
-#include <asm/arch/io.h>
-
-/* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
-#define VMALLOC_END	  (IO_VIRT - (2<<20))
diff --git a/include/asm-arm/arch-ebsa110/debug-macro.S b/include/asm-arm/arch-ebsa110/debug-macro.S
deleted file mode 100644
index 9213bfe..0000000
--- a/include/asm-arm/arch-ebsa110/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/include/asm-arm/arch-ebsa110/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-**/
-
-		.macro	addruart,rx
-		mov	\rx, #0xf0000000
-		orr	\rx, \rx, #0x00000be0
-		.endm
-
-#define UART_SHIFT	2
-#define FLOW_CONTROL
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ebsa110/dma.h b/include/asm-arm/arch-ebsa110/dma.h
deleted file mode 100644
index c52f9e2a..0000000
--- a/include/asm-arm/arch-ebsa110/dma.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  EBSA110 DMA definitions
- */
diff --git a/include/asm-arm/arch-ebsa110/entry-macro.S b/include/asm-arm/arch-ebsa110/entry-macro.S
deleted file mode 100644
index f242be5..0000000
--- a/include/asm-arm/arch-ebsa110/entry-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-ebsa110/entry-macro.S
- *
- * Low-level IRQ helper macros for ebsa110 platform.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-
-
-#define IRQ_STAT		0xff000000	/* read */
-
-	.macro	disable_fiq
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	mov	\base, #IRQ_STAT
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, stat, base, tmp
-	ldrb	\stat, [\base]			@ get interrupts
-	mov	\irqnr, #0
-	tst	\stat, #15
-	addeq	\irqnr, \irqnr, #4
-	moveq	\stat, \stat, lsr #4
-	tst	\stat, #3
-	addeq	\irqnr, \irqnr, #2
-	moveq	\stat, \stat, lsr #2
-	tst	\stat, #1
-	addeq	\irqnr, \irqnr, #1
-	moveq	\stat, \stat, lsr #1
-	tst	\stat, #1			@ bit 0 should be set
-	.endm
-
diff --git a/include/asm-arm/arch-ebsa110/hardware.h b/include/asm-arm/arch-ebsa110/hardware.h
deleted file mode 100644
index 3ce864d..0000000
--- a/include/asm-arm/arch-ebsa110/hardware.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/hardware.h
- *
- *  Copyright (C) 1996-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file contains the hardware definitions of the EBSA-110.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*
- * The EBSA110 has a weird "ISA IO" region:
- *
- * Region 0 (addr = 0xf0000000 + io << 2)
- * --------------------------------------------------------
- * Physical region	IO region
- * f0000fe0 - f0000ffc	3f8 - 3ff  ttyS0
- * f0000e60 - f0000e64	398 - 399
- * f0000de0 - f0000dfc	378 - 37f  lp0
- * f0000be0 - f0000bfc	2f8 - 2ff  ttyS1
- *
- * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1))
- * --------------------------------------------------------
- * Physical region	IO region
- * f00014f1             a79        pnp write data
- * f00007c0 - f00007c1	3e0 - 3e1  pcmcia
- * f00004f1		279        pnp address
- * f0000440 - f000046c  220 - 236  eth0
- * f0000405		203        pnp read data
- */
-
-#define ISAMEM_PHYS		0xe0000000
-#define ISAMEM_SIZE		0x10000000
-
-#define ISAIO_PHYS		0xf0000000
-#define ISAIO_SIZE		PGDIR_SIZE
-
-#define TRICK0_PHYS		0xf2000000
-#define TRICK1_PHYS		0xf2400000
-#define TRICK2_PHYS		0xf2800000
-#define TRICK3_PHYS		0xf2c00000
-#define TRICK4_PHYS		0xf3000000
-#define TRICK5_PHYS		0xf3400000
-#define TRICK6_PHYS		0xf3800000
-#define TRICK7_PHYS		0xf3c00000
-
-#define ISAMEM_BASE		0xe0000000
-#define ISAIO_BASE		0xf0000000
-
-#define PIT_BASE		0xfc000000
-#define SOFT_BASE		0xfd000000
-
-/*
- * RAM definitions
- */
-#define UNCACHEABLE_ADDR	0xff000000	/* IRQ_STAT */
-
-#endif
-
diff --git a/include/asm-arm/arch-ebsa110/io.h b/include/asm-arm/arch-ebsa110/io.h
deleted file mode 100644
index 44a4001..0000000
--- a/include/asm-arm/arch-ebsa110/io.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/io.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *  06-Dec-1997	RMK	Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffff
-
-u8 __inb8(unsigned int port);
-void __outb8(u8  val, unsigned int port);
-
-u8 __inb16(unsigned int port);
-void __outb16(u8  val, unsigned int port);
-
-u16 __inw(unsigned int port);
-void __outw(u16 val, unsigned int port);
-
-u32 __inl(unsigned int port);
-void __outl(u32 val, unsigned int port);
-
-u8  __readb(const volatile void __iomem *addr);
-u16 __readw(const volatile void __iomem *addr);
-u32 __readl(const volatile void __iomem *addr);
-
-void __writeb(u8  val, void __iomem *addr);
-void __writew(u16 val, void __iomem *addr);
-void __writel(u32 val, void __iomem *addr);
-
-/*
- * Argh, someone forgot the IOCS16 line.  We therefore have to handle
- * the byte stearing by selecting the correct byte IO functions here.
- */
-#ifdef ISA_SIXTEEN_BIT_PERIPHERAL
-#define inb(p) 			__inb16(p)
-#define outb(v,p)		__outb16(v,p)
-#else
-#define inb(p)			__inb8(p)
-#define outb(v,p)		__outb8(v,p)
-#endif
-
-#define inw(p)			__inw(p)
-#define outw(v,p)		__outw(v,p)
-
-#define inl(p)			__inl(p)
-#define outl(v,p)		__outl(v,p)
-
-#define readb(b)		__readb(b)
-#define readw(b)		__readw(b)
-#define readl(b)		__readl(b)
-#define readb_relaxed(addr)	readb(addr)
-#define readw_relaxed(addr)	readw(addr)
-#define readl_relaxed(addr)	readl(addr)
-
-#define writeb(v,b)		__writeb(v,b)
-#define writew(v,b)		__writew(v,b)
-#define writel(v,b)		__writel(v,b)
-
-static inline void __iomem *__arch_ioremap(unsigned long cookie, size_t size,
-					   unsigned int flags)
-{
-	return (void __iomem *)cookie;
-}
-
-#define __arch_ioremap		__arch_ioremap
-#define __arch_iounmap(cookie)	do { } while (0)
-
-extern void insb(unsigned int port, void *buf, int sz);
-extern void insw(unsigned int port, void *buf, int sz);
-extern void insl(unsigned int port, void *buf, int sz);
-
-extern void outsb(unsigned int port, const void *buf, int sz);
-extern void outsw(unsigned int port, const void *buf, int sz);
-extern void outsl(unsigned int port, const void *buf, int sz);
-
-/* can't support writesb atm */
-extern void writesw(void __iomem *addr, const void *data, int wordlen);
-extern void writesl(void __iomem *addr, const void *data, int longlen);
-
-/* can't support readsb atm */
-extern void readsw(const void __iomem *addr, void *data, int wordlen);
-extern void readsl(const void __iomem *addr, void *data, int longlen);
-
-#endif
diff --git a/include/asm-arm/arch-ebsa110/irqs.h b/include/asm-arm/arch-ebsa110/irqs.h
deleted file mode 100644
index ded9bd9..0000000
--- a/include/asm-arm/arch-ebsa110/irqs.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/irqs.h
- *
- *  Copyright (C) 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define NR_IRQS			8
-
-#define IRQ_EBSA110_PRINTER	0
-#define IRQ_EBSA110_COM1	1
-#define IRQ_EBSA110_COM2	2
-#define IRQ_EBSA110_ETHERNET	3
-#define IRQ_EBSA110_TIMER0	4
-#define IRQ_EBSA110_TIMER1	5
-#define IRQ_EBSA110_PCMCIA	6
-#define IRQ_EBSA110_IMMEDIATE	7
diff --git a/include/asm-arm/arch-ebsa110/memory.h b/include/asm-arm/arch-ebsa110/memory.h
deleted file mode 100644
index c7c500e1..0000000
--- a/include/asm-arm/arch-ebsa110/memory.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/memory.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   20-Oct-1996 RMK	Created
- *   31-Dec-1997 RMK	Fixed definitions to reduce warnings
- *   21-Mar-1999 RMK	Renamed to memory.h
- *		 RMK	Moved TASK_SIZE and PAGE_OFFSET here
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x00000000)
-
-/*
- * We keep this 1:1 so that we don't interfere
- * with the PCMCIA memory regions
- */
-#define __virt_to_bus(x)	(x)
-#define __bus_to_virt(x)	(x)
-
-/*
- * Cache flushing area - SRAM
- */
-#define FLUSH_BASE_PHYS		0x40000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/include/asm-arm/arch-ebsa110/system.h b/include/asm-arm/arch-ebsa110/system.h
deleted file mode 100644
index d7c8fec..0000000
--- a/include/asm-arm/arch-ebsa110/system.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/system.h
- *
- *  Copyright (C) 1996-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-/*
- * EBSA110 idling methodology:
- *
- * We can not execute the "wait for interrupt" instruction since that
- * will stop our MCLK signal (which provides the clock for the glue
- * logic, and therefore the timer interrupt).
- *
- * Instead, we spin, polling the IRQ_STAT register for the occurrence
- * of any interrupt with core clock down to the memory clock.
- */
-static inline void arch_idle(void)
-{
-	const char *irq_stat = (char *)0xff000000;
-
-	/* disable clock switching */
-	asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
-
-	/* wait for an interrupt to occur */
-	while (!*irq_stat);
-
-	/* enable clock switching */
-	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
-}
-
-#define arch_reset(mode)	cpu_reset(0x80000000)
-
-#endif
diff --git a/include/asm-arm/arch-ebsa110/timex.h b/include/asm-arm/arch-ebsa110/timex.h
deleted file mode 100644
index 1e9ef04..0000000
--- a/include/asm-arm/arch-ebsa110/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/timex.h
- *
- *  Copyright (C) 1997, 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  EBSA110 architecture timex specifications
- */
-
-/*
- * On the EBSA, the clock ticks at weird rates.
- * This is therefore not used to calculate the
- * divisor.
- */
-#define CLOCK_TICK_RATE		47894000
-
diff --git a/include/asm-arm/arch-ebsa110/uncompress.h b/include/asm-arm/arch-ebsa110/uncompress.h
deleted file mode 100644
index ae5b775..0000000
--- a/include/asm-arm/arch-ebsa110/uncompress.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/uncompress.h
- *
- *  Copyright (C) 1996,1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/serial_reg.h>
-
-#define SERIAL_BASE	((unsigned char *)0xf0000be0)
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	unsigned char v, *base = SERIAL_BASE;
-
-	do {
-		v = base[UART_LSR << 2];
-		barrier();
-	} while (!(v & UART_LSR_THRE));
-
-	base[UART_TX << 2] = c;
-}
-
-static inline void flush(void)
-{
-	unsigned char v, *base = SERIAL_BASE;
-
-	do {
-		v = base[UART_LSR << 2];
-		barrier();
-	} while ((v & (UART_LSR_TEMT|UART_LSR_THRE)) !=
-		 (UART_LSR_TEMT|UART_LSR_THRE));
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-ebsa110/vmalloc.h b/include/asm-arm/arch-ebsa110/vmalloc.h
deleted file mode 100644
index 26674ba..0000000
--- a/include/asm-arm/arch-ebsa110/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/vmalloc.h
- *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x1f000000)
diff --git a/include/asm-arm/arch-ebsa285/debug-macro.S b/include/asm-arm/arch-ebsa285/debug-macro.S
deleted file mode 100644
index b48cec4..0000000
--- a/include/asm-arm/arch-ebsa285/debug-macro.S
+++ /dev/null
@@ -1,57 +0,0 @@
-/* linux/include/asm-arm/arch-ebsa285/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <asm/hardware/dec21285.h>
-
-#ifndef CONFIG_DEBUG_DC21285_PORT
-	/* For NetWinder debugging */
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x7c000000	@ physical
-		movne	\rx, #0xff000000	@ virtual
-		orr	\rx, \rx, #0x000003f8
-		.endm
-
-#define UART_SHIFT	0
-#define FLOW_CONTROL
-#include <asm/hardware/debug-8250.S>
-
-#else
-	/* For EBSA285 debugging */
-		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
-		.equ	dc21285_low,  ARMCSR_BASE & 0x00ffffff
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x42000000
-		movne	\rx, #dc21285_high
-		.if	dc21285_low
-		orrne	\rx, \rx, #dc21285_low
-		.endif
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x160]	@ UARTDR
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldr	\rd, [\rx, #0x178]	@ UARTFLG
-		tst	\rd, #1 << 3
-		bne	1001b
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
-#endif
diff --git a/include/asm-arm/arch-ebsa285/dma.h b/include/asm-arm/arch-ebsa285/dma.h
deleted file mode 100644
index 0259ad4..0000000
--- a/include/asm-arm/arch-ebsa285/dma.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/dma.h
- *
- *  Architecture DMA routines
- *
- *  Copyright (C) 1998,1999 Russell King
- *  Copyright (C) 1998,1999 Philip Blundell
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/*
- * The 21285 has two internal DMA channels; we call these 8 and 9.
- * On CATS hardware we have an additional eight ISA dma channels
- * numbered 0..7.
- */
-#define _ISA_DMA(x)		(0+(x))
-#define _DC21285_DMA(x)		(8+(x))
-
-#define MAX_DMA_CHANNELS	10
-
-#define DMA_FLOPPY		_ISA_DMA(2)
-#define DMA_ISA_CASCADE		_ISA_DMA(4)
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-ebsa285/entry-macro.S b/include/asm-arm/arch-ebsa285/entry-macro.S
deleted file mode 100644
index e203c62..0000000
--- a/include/asm-arm/arch-ebsa285/entry-macro.S
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * include/asm-arm/arch-ebsa285/entry-macro.S
- *
- * Low-level IRQ helper macros for footbridge-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-#include <asm/arch/irqs.h>
-#include <asm/hardware/dec21285.h>
-
-		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
-		.equ	dc21285_low, ARMCSR_BASE & 0x00ffffff
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		mov	\base, #dc21285_high
-		.if	dc21285_low
-		orr	\base, \base, #dc21285_low
-		.endif
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base, #0x180]	@ get interrupts
-
-		mov	\irqnr, #IRQ_SDRAMPARITY
-		tst	\irqstat, #IRQ_MASK_SDRAMPARITY
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_UART_RX
-		movne	\irqnr, #IRQ_CONRX
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DMA1
-		movne	\irqnr, #IRQ_DMA1
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DMA2
-		movne	\irqnr, #IRQ_DMA2
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN0
-		movne	\irqnr, #IRQ_IN0
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN1
-		movne	\irqnr, #IRQ_IN1
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN2
-		movne	\irqnr, #IRQ_IN2
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN3
-		movne	\irqnr, #IRQ_IN3
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI
-		movne	\irqnr, #IRQ_PCI
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DOORBELLHOST
-		movne	\irqnr, #IRQ_DOORBELLHOST
-		bne     1001f
-
-		tst	\irqstat, #IRQ_MASK_I2OINPOST
-		movne	\irqnr, #IRQ_I2OINPOST
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_TIMER1
-		movne	\irqnr, #IRQ_TIMER1
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_TIMER2
-		movne	\irqnr, #IRQ_TIMER2
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_TIMER3
-		movne	\irqnr, #IRQ_TIMER3
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_UART_TX
-		movne	\irqnr, #IRQ_CONTX
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_ABORT
-		movne	\irqnr, #IRQ_PCI_ABORT
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_SERR
-		movne	\irqnr, #IRQ_PCI_SERR
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DISCARD_TIMER
-		movne	\irqnr, #IRQ_DISCARD_TIMER
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_DPERR
-		movne	\irqnr, #IRQ_PCI_DPERR
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_PERR
-		movne	\irqnr, #IRQ_PCI_PERR
-1001:
-		.endm
-
diff --git a/include/asm-arm/arch-ebsa285/hardware.h b/include/asm-arm/arch-ebsa285/hardware.h
deleted file mode 100644
index 74610c2..0000000
--- a/include/asm-arm/arch-ebsa285/hardware.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/hardware.h
- *
- *  Copyright (C) 1998-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file contains the hardware definitions of the EBSA-285.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/arch/memory.h>
-
-/*   Virtual      Physical	Size
- * 0xff800000	0x40000000	1MB	X-Bus
- * 0xff000000	0x7c000000	1MB	PCI I/O space
- * 0xfe000000	0x42000000	1MB	CSR
- * 0xfd000000	0x78000000	1MB	Outbound write flush (not supported)
- * 0xfc000000	0x79000000	1MB	PCI IACK/special space
- * 0xfb000000	0x7a000000	16MB	PCI Config type 1
- * 0xfa000000	0x7b000000	16MB	PCI Config type 0
- * 0xf9000000	0x50000000	1MB	Cache flush
- * 0xf0000000	0x80000000	16MB	ISA memory
- */
-#define XBUS_SIZE		0x00100000
-#define XBUS_BASE		0xff800000
-
-#define PCIO_SIZE		0x00100000
-#define PCIO_BASE		0xff000000
-
-#define ARMCSR_SIZE		0x00100000
-#define ARMCSR_BASE		0xfe000000
-
-#define WFLUSH_SIZE		0x00100000
-#define WFLUSH_BASE		0xfd000000
-
-#define PCIIACK_SIZE		0x00100000
-#define PCIIACK_BASE		0xfc000000
-
-#define PCICFG1_SIZE		0x01000000
-#define PCICFG1_BASE		0xfb000000
-
-#define PCICFG0_SIZE		0x01000000
-#define PCICFG0_BASE		0xfa000000
-
-#define PCIMEM_SIZE		0x01000000
-#define PCIMEM_BASE		0xf0000000
-
-#define XBUS_LEDS		((volatile unsigned char *)(XBUS_BASE + 0x12000))
-#define XBUS_LED_AMBER		(1 << 0)
-#define XBUS_LED_GREEN		(1 << 1)
-#define XBUS_LED_RED		(1 << 2)
-#define XBUS_LED_TOGGLE		(1 << 8)
-
-#define XBUS_SWITCH		((volatile unsigned char *)(XBUS_BASE + 0x12000))
-#define XBUS_SWITCH_SWITCH	((*XBUS_SWITCH) & 15)
-#define XBUS_SWITCH_J17_13	((*XBUS_SWITCH) & (1 << 4))
-#define XBUS_SWITCH_J17_11	((*XBUS_SWITCH) & (1 << 5))
-#define XBUS_SWITCH_J17_9	((*XBUS_SWITCH) & (1 << 6))
-
-#define UNCACHEABLE_ADDR	(ARMCSR_BASE + 0x108)
-
-
-/* PIC irq control */
-#define PIC_LO			0x20
-#define PIC_MASK_LO		0x21
-#define PIC_HI			0xA0
-#define PIC_MASK_HI		0xA1
-
-/* GPIO pins */
-#define GPIO_CCLK		0x800
-#define GPIO_DSCLK		0x400
-#define GPIO_E2CLK		0x200
-#define GPIO_IOLOAD		0x100
-#define GPIO_RED_LED		0x080
-#define GPIO_WDTIMER		0x040
-#define GPIO_DATA		0x020
-#define GPIO_IOCLK		0x010
-#define GPIO_DONE		0x008
-#define GPIO_FAN		0x004
-#define GPIO_GREEN_LED		0x002
-#define GPIO_RESET		0x001
-
-/* CPLD pins */
-#define CPLD_DS_ENABLE		8
-#define CPLD_7111_DISABLE	4
-#define CPLD_UNMUTE		2
-#define CPLD_FLASH_WR_ENABLE	1
-
-#ifndef __ASSEMBLY__
-extern void gpio_modify_op(int mask, int set);
-extern void gpio_modify_io(int mask, int in);
-extern int  gpio_read(void);
-extern void cpld_modify(int mask, int set);
-#endif
-
-#define pcibios_assign_all_busses()	1
-
-#define PCIBIOS_MIN_IO		0x1000
-#define PCIBIOS_MIN_MEM 	0x81000000
-
-#endif
diff --git a/include/asm-arm/arch-ebsa285/io.h b/include/asm-arm/arch-ebsa285/io.h
deleted file mode 100644
index e88c6e2..0000000
--- a/include/asm-arm/arch-ebsa285/io.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/io.h
- *
- *  Copyright (C) 1997-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Modifications:
- *   06-12-1997	RMK	Created.
- *   07-04-1999	RMK	Major cleanup
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffff
-
-/*
- * Translation of various region addresses to virtual addresses
- */
-#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
-#if 1
-#define __mem_pci(a)		(a)
-#else
-
-static inline void __iomem *___mem_pci(void __iomem *p)
-{
-	unsigned long a = (unsigned long)p;
-	BUG_ON(a <= 0xc0000000 || a >= 0xe0000000);
-	return p;
-}
-
-#define __mem_pci(a)		___mem_pci(a)
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-ebsa285/irqs.h b/include/asm-arm/arch-ebsa285/irqs.h
deleted file mode 100644
index 3e766f1..0000000
--- a/include/asm-arm/arch-ebsa285/irqs.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa285/irqs.h
- *
- * Copyright (C) 1998 Russell King
- * Copyright (C) 1998 Phil Blundell
- *
- * Changelog:
- *  20-Jan-1998	RMK	Started merge of EBSA286, CATS and NetWinder
- *  01-Feb-1999	PJB	ISA IRQs start at 0 not 16
- */
-#include <asm/mach-types.h>
-
-#define NR_IRQS			36
-#define NR_DC21285_IRQS		16
-
-#define _ISA_IRQ(x)		(0 + (x))
-#define _ISA_INR(x)		((x) - 0)
-#define _DC21285_IRQ(x)		(16 + (x))
-#define _DC21285_INR(x)		((x) - 16)
-
-/*
- * This is a list of all interrupts that the 21285
- * can generate and we handle.
- */
-#define IRQ_CONRX		_DC21285_IRQ(0)
-#define IRQ_CONTX		_DC21285_IRQ(1)
-#define IRQ_TIMER1		_DC21285_IRQ(2)
-#define IRQ_TIMER2		_DC21285_IRQ(3)
-#define IRQ_TIMER3		_DC21285_IRQ(4)
-#define IRQ_IN0			_DC21285_IRQ(5)
-#define IRQ_IN1			_DC21285_IRQ(6)
-#define IRQ_IN2			_DC21285_IRQ(7)
-#define IRQ_IN3			_DC21285_IRQ(8)
-#define IRQ_DOORBELLHOST	_DC21285_IRQ(9)
-#define IRQ_DMA1		_DC21285_IRQ(10)
-#define IRQ_DMA2		_DC21285_IRQ(11)
-#define IRQ_PCI			_DC21285_IRQ(12)
-#define IRQ_SDRAMPARITY		_DC21285_IRQ(13)
-#define IRQ_I2OINPOST		_DC21285_IRQ(14)
-#define IRQ_PCI_ABORT		_DC21285_IRQ(15)
-#define IRQ_PCI_SERR		_DC21285_IRQ(16)
-#define IRQ_DISCARD_TIMER	_DC21285_IRQ(17)
-#define IRQ_PCI_DPERR		_DC21285_IRQ(18)
-#define IRQ_PCI_PERR		_DC21285_IRQ(19)
-
-#define IRQ_ISA_TIMER		_ISA_IRQ(0)
-#define IRQ_ISA_KEYBOARD	_ISA_IRQ(1)
-#define IRQ_ISA_CASCADE		_ISA_IRQ(2)
-#define IRQ_ISA_UART2		_ISA_IRQ(3)
-#define IRQ_ISA_UART		_ISA_IRQ(4)
-#define IRQ_ISA_FLOPPY		_ISA_IRQ(6)
-#define IRQ_ISA_PRINTER		_ISA_IRQ(7)
-#define IRQ_ISA_RTC_ALARM	_ISA_IRQ(8)
-#define IRQ_ISA_2		_ISA_IRQ(9)
-#define IRQ_ISA_PS2MOUSE	_ISA_IRQ(12)
-#define IRQ_ISA_HARDDISK1	_ISA_IRQ(14)
-#define IRQ_ISA_HARDDISK2	_ISA_IRQ(15)
-
-#define IRQ_MASK_UART_RX	(1 << 2)
-#define IRQ_MASK_UART_TX	(1 << 3)
-#define IRQ_MASK_TIMER1		(1 << 4)
-#define IRQ_MASK_TIMER2		(1 << 5)
-#define IRQ_MASK_TIMER3		(1 << 6)
-#define IRQ_MASK_IN0		(1 << 8)
-#define IRQ_MASK_IN1		(1 << 9)
-#define IRQ_MASK_IN2		(1 << 10)
-#define IRQ_MASK_IN3		(1 << 11)
-#define IRQ_MASK_DOORBELLHOST	(1 << 15)
-#define IRQ_MASK_DMA1		(1 << 16)
-#define IRQ_MASK_DMA2		(1 << 17)
-#define IRQ_MASK_PCI		(1 << 18)
-#define IRQ_MASK_SDRAMPARITY	(1 << 24)
-#define IRQ_MASK_I2OINPOST	(1 << 25)
-#define IRQ_MASK_PCI_ABORT	((1 << 29) | (1 << 30))
-#define IRQ_MASK_PCI_SERR	(1 << 23)
-#define IRQ_MASK_DISCARD_TIMER	(1 << 27)
-#define IRQ_MASK_PCI_DPERR	(1 << 28)
-#define IRQ_MASK_PCI_PERR	(1 << 31)
-
-/*
- * Netwinder interrupt allocations
- */
-#define IRQ_NETWINDER_ETHER10	IRQ_IN0
-#define IRQ_NETWINDER_ETHER100	IRQ_IN1
-#define IRQ_NETWINDER_VIDCOMP	IRQ_IN2
-#define IRQ_NETWINDER_PS2MOUSE	_ISA_IRQ(5)
-#define IRQ_NETWINDER_IR	_ISA_IRQ(6)
-#define IRQ_NETWINDER_BUTTON	_ISA_IRQ(10)
-#define IRQ_NETWINDER_VGA	_ISA_IRQ(11)
-#define IRQ_NETWINDER_SOUND	_ISA_IRQ(12)
-
-#undef RTC_IRQ
-#define RTC_IRQ		IRQ_ISA_RTC_ALARM
-#define I8042_KBD_IRQ	IRQ_ISA_KEYBOARD
-#define I8042_AUX_IRQ	(machine_is_netwinder() ? IRQ_NETWINDER_PS2MOUSE : IRQ_ISA_PS2MOUSE)
-#define IRQ_FLOPPYDISK	IRQ_ISA_FLOPPY
-
-#define irq_canonicalize(_i)	(((_i) == IRQ_ISA_CASCADE) ? IRQ_ISA_2 : _i)
diff --git a/include/asm-arm/arch-ebsa285/memory.h b/include/asm-arm/arch-ebsa285/memory.h
deleted file mode 100644
index 9019a3b..0000000
--- a/include/asm-arm/arch-ebsa285/memory.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/memory.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   20-Oct-1996 RMK	Created
- *   31-Dec-1997 RMK	Fixed definitions to reduce warnings.
- *   17-May-1998 DAG	Added __virt_to_bus and __bus_to_virt functions.
- *   21-Nov-1998 RMK	Changed __virt_to_bus and __bus_to_virt to macros.
- *   21-Mar-1999 RMK	Added PAGE_OFFSET for co285 architecture.
- *			Renamed to memory.h
- *			Moved PAGE_OFFSET and TASK_SIZE here
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-
-#if defined(CONFIG_FOOTBRIDGE_ADDIN)
-/*
- * If we may be using add-in footbridge mode, then we must
- * use the out-of-line translation that makes use of the
- * PCI BAR
- */
-#ifndef __ASSEMBLY__
-extern unsigned long __virt_to_bus(unsigned long);
-extern unsigned long __bus_to_virt(unsigned long);
-#endif
-
-#elif defined(CONFIG_FOOTBRIDGE_HOST)
-
-#define __virt_to_bus(x)	((x) - 0xe0000000)
-#define __bus_to_virt(x)	((x) + 0xe0000000)
-
-#else
-
-#error "Undefined footbridge mode"
-
-#endif
-
-/* Task size and page offset at 3GB */
-#define TASK_SIZE		UL(0xbf000000)
-#define PAGE_OFFSET		UL(0xc0000000)
-
-/*
- * Cache flushing area.
- */
-#define FLUSH_BASE		0xf9000000
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET		UL(0x00000000)
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
-
-#define FLUSH_BASE_PHYS		0x50000000
-
-#endif
diff --git a/include/asm-arm/arch-ebsa285/system.h b/include/asm-arm/arch-ebsa285/system.h
deleted file mode 100644
index a720bf7..0000000
--- a/include/asm-arm/arch-ebsa285/system.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/system.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/hardware/dec21285.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	if (mode == 's') {
-		/*
-		 * Jump into the ROM
-		 */
-		cpu_reset(0x41000000);
-	} else {
-		if (machine_is_netwinder()) {
-			/* open up the SuperIO chip
-			 */
-			outb(0x87, 0x370);
-			outb(0x87, 0x370);
-
-			/* aux function group 1 (logical device 7)
-			 */
-			outb(0x07, 0x370);
-			outb(0x07, 0x371);
-
-			/* set GP16 for WD-TIMER output
-			 */
-			outb(0xe6, 0x370);
-			outb(0x00, 0x371);
-
-			/* set a RED LED and toggle WD_TIMER for rebooting
-			 */
-			outb(0xc4, 0x338);
-		} else {
-			/* 
-			 * Force the watchdog to do a CPU reset.
-			 *
-			 * After making sure that the watchdog is disabled
-			 * (so we can change the timer registers) we first
-			 * enable the timer to autoreload itself.  Next, the
-			 * timer interval is set really short and any
-			 * current interrupt request is cleared (so we can
-			 * see an edge transition).  Finally, TIMER4 is
-			 * enabled as the watchdog.
-			 */
-			*CSR_SA110_CNTL &= ~(1 << 13);
-			*CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
-					   TIMER_CNTL_AUTORELOAD |
-					   TIMER_CNTL_DIV16;
-			*CSR_TIMER4_LOAD = 0x2;
-			*CSR_TIMER4_CLR  = 0;
-			*CSR_SA110_CNTL |= (1 << 13);
-		}
-	}
-}
diff --git a/include/asm-arm/arch-ebsa285/timex.h b/include/asm-arm/arch-ebsa285/timex.h
deleted file mode 100644
index df60b38..0000000
--- a/include/asm-arm/arch-ebsa285/timex.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/timex.h
- *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  EBSA285 architecture timex specifications
- */
-
-/*
- * We assume a constant here; this satisfies the maths in linux/timex.h
- * and linux/time.h.  CLOCK_TICK_RATE is actually system dependent, but
- * this must be a constant.
- */
-#define CLOCK_TICK_RATE		(50000000/16)
diff --git a/include/asm-arm/arch-ebsa285/uncompress.h b/include/asm-arm/arch-ebsa285/uncompress.h
deleted file mode 100644
index 86142c8..0000000
--- a/include/asm-arm/arch-ebsa285/uncompress.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/uncompress.h
- *
- *  Copyright (C) 1996-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/mach-types.h>
-
-/*
- * Note! This could cause problems on the NetWinder
- */
-#define DC21285_BASE ((volatile unsigned int *)0x42000160)
-#define SER0_BASE    ((volatile unsigned char *)0x7c0003f8)
-
-static inline void putc(char c)
-{
-	if (machine_is_netwinder()) {
-		while ((SER0_BASE[5] & 0x60) != 0x60)
-			barrier();
-		SER0_BASE[0] = c;
-	} else {
-		while (DC21285_BASE[6] & 8);
-		DC21285_BASE[0] = c;
-	}
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-ebsa285/vmalloc.h b/include/asm-arm/arch-ebsa285/vmalloc.h
deleted file mode 100644
index e487d7e..0000000
--- a/include/asm-arm/arch-ebsa285/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-#define VMALLOC_END       (PAGE_OFFSET + 0x30000000)
diff --git a/include/asm-arm/arch-ep93xx/debug-macro.S b/include/asm-arm/arch-ep93xx/debug-macro.S
deleted file mode 100644
index 397565a..0000000
--- a/include/asm-arm/arch-ep93xx/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/debug-macro.S
- * Debugging macro include header
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-#include <asm/arch/ep93xx-regs.h>
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1				@ MMU enabled?
-		ldreq	\rx, =EP93XX_APB_PHYS_BASE	@ Physical base
-		ldrne	\rx, =EP93XX_APB_VIRT_BASE	@ virtual base
-		orr	\rx, \rx, #0x000c0000
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/include/asm-arm/arch-ep93xx/dma.h b/include/asm-arm/arch-ep93xx/dma.h
deleted file mode 100644
index 898b3ab..0000000
--- a/include/asm-arm/arch-ep93xx/dma.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/dma.h
- */
diff --git a/include/asm-arm/arch-ep93xx/entry-macro.S b/include/asm-arm/arch-ep93xx/entry-macro.S
deleted file mode 100644
index 241ec22..0000000
--- a/include/asm-arm/arch-ep93xx/entry-macro.S
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/entry-macro.S
- * IRQ demultiplexing for EP93xx
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-#include <asm/arch/ep93xx-regs.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =(EP93XX_AHB_VIRT_BASE)
-		orr	\base, \base, #0x000b0000
-		mov	\irqnr, #0
-		ldr	\irqstat, [\base]		@ lower 32 interrupts
-		cmp	\irqstat, #0
-		bne	1001f
-
-		eor	\base, \base, #0x00070000
-		ldr	\irqstat, [\base]		@ upper 32 interrupts
-		cmp	\irqstat, #0
-		beq	1002f
-		mov	\irqnr, #0x20
-
-1001:
-		movs	\tmp, \irqstat, lsl #16
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #16
-
-		movs	\tmp, \irqstat, lsl #8
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #8
-
-		movs	\tmp, \irqstat, lsl #4
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #4
-
-		movs	\tmp, \irqstat, lsl #2
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #2
-
-		movs	\tmp, \irqstat, lsl #1
-		addeq	\irqnr, \irqnr, #1
-		orrs	\base, \base, #1
-
-1002:
-		.endm
diff --git a/include/asm-arm/arch-ep93xx/ep93xx-regs.h b/include/asm-arm/arch-ep93xx/ep93xx-regs.h
deleted file mode 100644
index 625c6f0..0000000
--- a/include/asm-arm/arch-ep93xx/ep93xx-regs.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/ep93xx-regs.h
- */
-
-#ifndef __ASM_ARCH_EP93XX_REGS_H
-#define __ASM_ARCH_EP93XX_REGS_H
-
-/*
- * EP93xx linux memory map:
- *
- * virt		phys		size
- * fe800000			5M		per-platform mappings
- * fed00000	80800000	2M		APB
- * fef00000	80000000	1M		AHB
- */
-
-#define EP93XX_AHB_PHYS_BASE		0x80000000
-#define EP93XX_AHB_VIRT_BASE		0xfef00000
-#define EP93XX_AHB_SIZE			0x00100000
-
-#define EP93XX_APB_PHYS_BASE		0x80800000
-#define EP93XX_APB_VIRT_BASE		0xfed00000
-#define EP93XX_APB_SIZE			0x00200000
-
-
-/* AHB peripherals */
-#define EP93XX_DMA_BASE			(EP93XX_AHB_VIRT_BASE + 0x00000000)
-
-#define EP93XX_ETHERNET_BASE		(EP93XX_AHB_VIRT_BASE + 0x00010000)
-#define EP93XX_ETHERNET_PHYS_BASE	(EP93XX_AHB_PHYS_BASE + 0x00010000)
-
-#define EP93XX_USB_BASE			(EP93XX_AHB_VIRT_BASE + 0x00020000)
-#define EP93XX_USB_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00020000)
-
-#define EP93XX_RASTER_BASE		(EP93XX_AHB_VIRT_BASE + 0x00030000)
-
-#define EP93XX_GRAPHICS_ACCEL_BASE	(EP93XX_AHB_VIRT_BASE + 0x00040000)
-
-#define EP93XX_SDRAM_CONTROLLER_BASE	(EP93XX_AHB_VIRT_BASE + 0x00060000)
-
-#define EP93XX_PCMCIA_CONTROLLER_BASE	(EP93XX_AHB_VIRT_BASE + 0x00080000)
-
-#define EP93XX_BOOT_ROM_BASE		(EP93XX_AHB_VIRT_BASE + 0x00090000)
-
-#define EP93XX_IDE_BASE			(EP93XX_AHB_VIRT_BASE + 0x000a0000)
-
-#define EP93XX_VIC1_BASE		(EP93XX_AHB_VIRT_BASE + 0x000b0000)
-
-#define EP93XX_VIC2_BASE		(EP93XX_AHB_VIRT_BASE + 0x000c0000)
-
-
-/* APB peripherals */
-#define EP93XX_TIMER_BASE		(EP93XX_APB_VIRT_BASE + 0x00010000)
-#define EP93XX_TIMER_REG(x)		(EP93XX_TIMER_BASE + (x))
-#define EP93XX_TIMER1_LOAD		EP93XX_TIMER_REG(0x00)
-#define EP93XX_TIMER1_VALUE		EP93XX_TIMER_REG(0x04)
-#define EP93XX_TIMER1_CONTROL		EP93XX_TIMER_REG(0x08)
-#define EP93XX_TIMER1_CLEAR		EP93XX_TIMER_REG(0x0c)
-#define EP93XX_TIMER2_LOAD		EP93XX_TIMER_REG(0x20)
-#define EP93XX_TIMER2_VALUE		EP93XX_TIMER_REG(0x24)
-#define EP93XX_TIMER2_CONTROL		EP93XX_TIMER_REG(0x28)
-#define EP93XX_TIMER2_CLEAR		EP93XX_TIMER_REG(0x2c)
-#define EP93XX_TIMER4_VALUE_LOW		EP93XX_TIMER_REG(0x60)
-#define EP93XX_TIMER4_VALUE_HIGH	EP93XX_TIMER_REG(0x64)
-#define EP93XX_TIMER3_LOAD		EP93XX_TIMER_REG(0x80)
-#define EP93XX_TIMER3_VALUE		EP93XX_TIMER_REG(0x84)
-#define EP93XX_TIMER3_CONTROL		EP93XX_TIMER_REG(0x88)
-#define EP93XX_TIMER3_CLEAR		EP93XX_TIMER_REG(0x8c)
-
-#define EP93XX_I2S_BASE			(EP93XX_APB_VIRT_BASE + 0x00020000)
-
-#define EP93XX_SECURITY_BASE		(EP93XX_APB_VIRT_BASE + 0x00030000)
-
-#define EP93XX_GPIO_BASE		(EP93XX_APB_VIRT_BASE + 0x00040000)
-#define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
-#define EP93XX_GPIO_F_INT_TYPE1		EP93XX_GPIO_REG(0x4c)
-#define EP93XX_GPIO_F_INT_TYPE2		EP93XX_GPIO_REG(0x50)
-#define EP93XX_GPIO_F_INT_ACK		EP93XX_GPIO_REG(0x54)
-#define EP93XX_GPIO_F_INT_ENABLE	EP93XX_GPIO_REG(0x58)
-#define EP93XX_GPIO_F_INT_STATUS	EP93XX_GPIO_REG(0x5c)
-#define EP93XX_GPIO_A_INT_TYPE1		EP93XX_GPIO_REG(0x90)
-#define EP93XX_GPIO_A_INT_TYPE2		EP93XX_GPIO_REG(0x94)
-#define EP93XX_GPIO_A_INT_ACK		EP93XX_GPIO_REG(0x98)
-#define EP93XX_GPIO_A_INT_ENABLE	EP93XX_GPIO_REG(0x9c)
-#define EP93XX_GPIO_A_INT_STATUS	EP93XX_GPIO_REG(0xa0)
-#define EP93XX_GPIO_B_INT_TYPE1		EP93XX_GPIO_REG(0xac)
-#define EP93XX_GPIO_B_INT_TYPE2		EP93XX_GPIO_REG(0xb0)
-#define EP93XX_GPIO_B_INT_ACK		EP93XX_GPIO_REG(0xb4)
-#define EP93XX_GPIO_B_INT_ENABLE	EP93XX_GPIO_REG(0xb8)
-#define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
-
-#define EP93XX_AAC_BASE			(EP93XX_APB_VIRT_BASE + 0x00080000)
-
-#define EP93XX_SPI_BASE			(EP93XX_APB_VIRT_BASE + 0x000a0000)
-
-#define EP93XX_IRDA_BASE		(EP93XX_APB_VIRT_BASE + 0x000b0000)
-
-#define EP93XX_UART1_BASE		(EP93XX_APB_VIRT_BASE + 0x000c0000)
-#define EP93XX_UART1_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000c0000)
-
-#define EP93XX_UART2_BASE		(EP93XX_APB_VIRT_BASE + 0x000d0000)
-#define EP93XX_UART2_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000d0000)
-
-#define EP93XX_UART3_BASE		(EP93XX_APB_VIRT_BASE + 0x000e0000)
-#define EP93XX_UART3_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000e0000)
-
-#define EP93XX_KEY_MATRIX_BASE		(EP93XX_APB_VIRT_BASE + 0x000f0000)
-
-#define EP93XX_ADC_BASE			(EP93XX_APB_VIRT_BASE + 0x00100000)
-#define EP93XX_TOUCHSCREEN_BASE		(EP93XX_APB_VIRT_BASE + 0x00100000)
-
-#define EP93XX_PWM_BASE			(EP93XX_APB_VIRT_BASE + 0x00110000)
-
-#define EP93XX_RTC_BASE			(EP93XX_APB_VIRT_BASE + 0x00120000)
-
-#define EP93XX_SYSCON_BASE		(EP93XX_APB_VIRT_BASE + 0x00130000)
-#define EP93XX_SYSCON_REG(x)		(EP93XX_SYSCON_BASE + (x))
-#define EP93XX_SYSCON_POWER_STATE	EP93XX_SYSCON_REG(0x00)
-#define EP93XX_SYSCON_CLOCK_CONTROL	EP93XX_SYSCON_REG(0x04)
-#define EP93XX_SYSCON_CLOCK_UARTBAUD	0x20000000
-#define EP93XX_SYSCON_CLOCK_USH_EN	0x10000000
-#define EP93XX_SYSCON_HALT		EP93XX_SYSCON_REG(0x08)
-#define EP93XX_SYSCON_STANDBY		EP93XX_SYSCON_REG(0x0c)
-#define EP93XX_SYSCON_CLOCK_SET1	EP93XX_SYSCON_REG(0x20)
-#define EP93XX_SYSCON_CLOCK_SET2	EP93XX_SYSCON_REG(0x24)
-#define EP93XX_SYSCON_DEVICE_CONFIG	EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE	0x00800000
-#define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
-
-#define EP93XX_WATCHDOG_BASE		(EP93XX_APB_VIRT_BASE + 0x00140000)
-
-
-#endif
diff --git a/include/asm-arm/arch-ep93xx/gesbc9312.h b/include/asm-arm/arch-ep93xx/gesbc9312.h
deleted file mode 100644
index 4d0b302..0000000
--- a/include/asm-arm/arch-ep93xx/gesbc9312.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/gesbc9312.h
- */
diff --git a/include/asm-arm/arch-ep93xx/gpio.h b/include/asm-arm/arch-ep93xx/gpio.h
deleted file mode 100644
index 186e7c7..0000000
--- a/include/asm-arm/arch-ep93xx/gpio.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/gpio.h
- */
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-/* GPIO port A.  */
-#define EP93XX_GPIO_LINE_A(x)		((x) + 0)
-#define EP93XX_GPIO_LINE_EGPIO0		EP93XX_GPIO_LINE_A(0)
-#define EP93XX_GPIO_LINE_EGPIO1		EP93XX_GPIO_LINE_A(1)
-#define EP93XX_GPIO_LINE_EGPIO2		EP93XX_GPIO_LINE_A(2)
-#define EP93XX_GPIO_LINE_EGPIO3		EP93XX_GPIO_LINE_A(3)
-#define EP93XX_GPIO_LINE_EGPIO4		EP93XX_GPIO_LINE_A(4)
-#define EP93XX_GPIO_LINE_EGPIO5		EP93XX_GPIO_LINE_A(5)
-#define EP93XX_GPIO_LINE_EGPIO6		EP93XX_GPIO_LINE_A(6)
-#define EP93XX_GPIO_LINE_EGPIO7		EP93XX_GPIO_LINE_A(7)
-
-/* GPIO port B.  */
-#define EP93XX_GPIO_LINE_B(x)		((x) + 8)
-#define EP93XX_GPIO_LINE_EGPIO8		EP93XX_GPIO_LINE_B(0)
-#define EP93XX_GPIO_LINE_EGPIO9		EP93XX_GPIO_LINE_B(1)
-#define EP93XX_GPIO_LINE_EGPIO10	EP93XX_GPIO_LINE_B(2)
-#define EP93XX_GPIO_LINE_EGPIO11	EP93XX_GPIO_LINE_B(3)
-#define EP93XX_GPIO_LINE_EGPIO12	EP93XX_GPIO_LINE_B(4)
-#define EP93XX_GPIO_LINE_EGPIO13	EP93XX_GPIO_LINE_B(5)
-#define EP93XX_GPIO_LINE_EGPIO14	EP93XX_GPIO_LINE_B(6)
-#define EP93XX_GPIO_LINE_EGPIO15	EP93XX_GPIO_LINE_B(7)
-
-/* GPIO port C.  */
-#define EP93XX_GPIO_LINE_C(x)		((x) + 40)
-#define EP93XX_GPIO_LINE_ROW0		EP93XX_GPIO_LINE_C(0)
-#define EP93XX_GPIO_LINE_ROW1		EP93XX_GPIO_LINE_C(1)
-#define EP93XX_GPIO_LINE_ROW2		EP93XX_GPIO_LINE_C(2)
-#define EP93XX_GPIO_LINE_ROW3		EP93XX_GPIO_LINE_C(3)
-#define EP93XX_GPIO_LINE_ROW4		EP93XX_GPIO_LINE_C(4)
-#define EP93XX_GPIO_LINE_ROW5		EP93XX_GPIO_LINE_C(5)
-#define EP93XX_GPIO_LINE_ROW6		EP93XX_GPIO_LINE_C(6)
-#define EP93XX_GPIO_LINE_ROW7		EP93XX_GPIO_LINE_C(7)
-
-/* GPIO port D.  */
-#define EP93XX_GPIO_LINE_D(x)		((x) + 24)
-#define EP93XX_GPIO_LINE_COL0		EP93XX_GPIO_LINE_D(0)
-#define EP93XX_GPIO_LINE_COL1		EP93XX_GPIO_LINE_D(1)
-#define EP93XX_GPIO_LINE_COL2		EP93XX_GPIO_LINE_D(2)
-#define EP93XX_GPIO_LINE_COL3		EP93XX_GPIO_LINE_D(3)
-#define EP93XX_GPIO_LINE_COL4		EP93XX_GPIO_LINE_D(4)
-#define EP93XX_GPIO_LINE_COL5		EP93XX_GPIO_LINE_D(5)
-#define EP93XX_GPIO_LINE_COL6		EP93XX_GPIO_LINE_D(6)
-#define EP93XX_GPIO_LINE_COL7		EP93XX_GPIO_LINE_D(7)
-
-/* GPIO port E.  */
-#define EP93XX_GPIO_LINE_E(x)		((x) + 32)
-#define EP93XX_GPIO_LINE_GRLED		EP93XX_GPIO_LINE_E(0)
-#define EP93XX_GPIO_LINE_RDLED		EP93XX_GPIO_LINE_E(1)
-#define EP93XX_GPIO_LINE_DIORn		EP93XX_GPIO_LINE_E(2)
-#define EP93XX_GPIO_LINE_IDECS1n	EP93XX_GPIO_LINE_E(3)
-#define EP93XX_GPIO_LINE_IDECS2n	EP93XX_GPIO_LINE_E(4)
-#define EP93XX_GPIO_LINE_IDEDA0		EP93XX_GPIO_LINE_E(5)
-#define EP93XX_GPIO_LINE_IDEDA1		EP93XX_GPIO_LINE_E(6)
-#define EP93XX_GPIO_LINE_IDEDA2		EP93XX_GPIO_LINE_E(7)
-
-/* GPIO port F.  */
-#define EP93XX_GPIO_LINE_F(x)		((x) + 16)
-#define EP93XX_GPIO_LINE_WP		EP93XX_GPIO_LINE_F(0)
-#define EP93XX_GPIO_LINE_MCCD1		EP93XX_GPIO_LINE_F(1)
-#define EP93XX_GPIO_LINE_MCCD2		EP93XX_GPIO_LINE_F(2)
-#define EP93XX_GPIO_LINE_MCBVD1		EP93XX_GPIO_LINE_F(3)
-#define EP93XX_GPIO_LINE_MCBVD2		EP93XX_GPIO_LINE_F(4)
-#define EP93XX_GPIO_LINE_VS1		EP93XX_GPIO_LINE_F(5)
-#define EP93XX_GPIO_LINE_READY		EP93XX_GPIO_LINE_F(6)
-#define EP93XX_GPIO_LINE_VS2		EP93XX_GPIO_LINE_F(7)
-
-/* GPIO port G.  */
-#define EP93XX_GPIO_LINE_G(x)		((x) + 48)
-#define EP93XX_GPIO_LINE_EECLK		EP93XX_GPIO_LINE_G(0)
-#define EP93XX_GPIO_LINE_EEDAT		EP93XX_GPIO_LINE_G(1)
-#define EP93XX_GPIO_LINE_SLA0		EP93XX_GPIO_LINE_G(2)
-#define EP93XX_GPIO_LINE_SLA1		EP93XX_GPIO_LINE_G(3)
-#define EP93XX_GPIO_LINE_DD12		EP93XX_GPIO_LINE_G(4)
-#define EP93XX_GPIO_LINE_DD13		EP93XX_GPIO_LINE_G(5)
-#define EP93XX_GPIO_LINE_DD14		EP93XX_GPIO_LINE_G(6)
-#define EP93XX_GPIO_LINE_DD15		EP93XX_GPIO_LINE_G(7)
-
-/* GPIO port H.  */
-#define EP93XX_GPIO_LINE_H(x)		((x) + 56)
-#define EP93XX_GPIO_LINE_DD0		EP93XX_GPIO_LINE_H(0)
-#define EP93XX_GPIO_LINE_DD1		EP93XX_GPIO_LINE_H(1)
-#define EP93XX_GPIO_LINE_DD2		EP93XX_GPIO_LINE_H(2)
-#define EP93XX_GPIO_LINE_DD3		EP93XX_GPIO_LINE_H(3)
-#define EP93XX_GPIO_LINE_DD4		EP93XX_GPIO_LINE_H(4)
-#define EP93XX_GPIO_LINE_DD5		EP93XX_GPIO_LINE_H(5)
-#define EP93XX_GPIO_LINE_DD6		EP93XX_GPIO_LINE_H(6)
-#define EP93XX_GPIO_LINE_DD7		EP93XX_GPIO_LINE_H(7)
-
-/* maximum value for gpio line identifiers */
-#define EP93XX_GPIO_LINE_MAX		EP93XX_GPIO_LINE_H(7)
-
-/* maximum value for irq capable line identifiers */
-#define EP93XX_GPIO_LINE_MAX_IRQ	EP93XX_GPIO_LINE_F(7)
-
-/* new generic GPIO API - see Documentation/gpio.txt */
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-
-/*
- * Map GPIO A0..A7  (0..7)  to irq 64..71,
- *          B0..B7  (7..15) to irq 72..79, and
- *          F0..F7 (16..24) to irq 80..87.
- */
-static inline int gpio_to_irq(unsigned gpio)
-{
-	if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
-		return 64 + gpio;
-
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq - gpio_to_irq(0);
-}
-
-#endif
diff --git a/include/asm-arm/arch-ep93xx/hardware.h b/include/asm-arm/arch-ep93xx/hardware.h
deleted file mode 100644
index 4233f6e8..0000000
--- a/include/asm-arm/arch-ep93xx/hardware.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/hardware.h
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "ep93xx-regs.h"
-
-#define pcibios_assign_all_busses()	0
-
-#include "platform.h"
-
-#include "gesbc9312.h"
-#include "ts72xx.h"
-
-#endif
diff --git a/include/asm-arm/arch-ep93xx/io.h b/include/asm-arm/arch-ep93xx/io.h
deleted file mode 100644
index 7b4d25e..0000000
--- a/include/asm-arm/arch-ep93xx/io.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/io.h
- */
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-#define __io(p)			((void __iomem *)(p))
-#define __mem_pci(p)		(p)
diff --git a/include/asm-arm/arch-ep93xx/irqs.h b/include/asm-arm/arch-ep93xx/irqs.h
deleted file mode 100644
index 53d4a68..0000000
--- a/include/asm-arm/arch-ep93xx/irqs.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/irqs.h
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define IRQ_EP93XX_COMMRX		2
-#define IRQ_EP93XX_COMMTX		3
-#define IRQ_EP93XX_TIMER1		4
-#define IRQ_EP93XX_TIMER2		5
-#define IRQ_EP93XX_AACINTR		6
-#define IRQ_EP93XX_DMAM2P0		7
-#define IRQ_EP93XX_DMAM2P1		8
-#define IRQ_EP93XX_DMAM2P2		9
-#define IRQ_EP93XX_DMAM2P3		10
-#define IRQ_EP93XX_DMAM2P4		11
-#define IRQ_EP93XX_DMAM2P5		12
-#define IRQ_EP93XX_DMAM2P6		13
-#define IRQ_EP93XX_DMAM2P7		14
-#define IRQ_EP93XX_DMAM2P8		15
-#define IRQ_EP93XX_DMAM2P9		16
-#define IRQ_EP93XX_DMAM2M0		17
-#define IRQ_EP93XX_DMAM2M1		18
-#define IRQ_EP93XX_GPIO0MUX		19
-#define IRQ_EP93XX_GPIO1MUX		20
-#define IRQ_EP93XX_GPIO2MUX		21
-#define IRQ_EP93XX_GPIO3MUX		22
-#define IRQ_EP93XX_UART1RX		23
-#define IRQ_EP93XX_UART1TX		24
-#define IRQ_EP93XX_UART2RX		25
-#define IRQ_EP93XX_UART2TX		26
-#define IRQ_EP93XX_UART3RX		27
-#define IRQ_EP93XX_UART3TX		28
-#define IRQ_EP93XX_KEY			29
-#define IRQ_EP93XX_TOUCH		30
-#define EP93XX_VIC1_VALID_IRQ_MASK	0x7ffffffc
-
-#define IRQ_EP93XX_EXT0			32
-#define IRQ_EP93XX_EXT1			33
-#define IRQ_EP93XX_EXT2			34
-#define IRQ_EP93XX_64HZ			35
-#define IRQ_EP93XX_WATCHDOG		36
-#define IRQ_EP93XX_RTC			37
-#define IRQ_EP93XX_IRDA			38
-#define IRQ_EP93XX_ETHERNET		39
-#define IRQ_EP93XX_EXT3			40
-#define IRQ_EP93XX_PROG			41
-#define IRQ_EP93XX_1HZ			42
-#define IRQ_EP93XX_VSYNC		43
-#define IRQ_EP93XX_VIDEO_FIFO		44
-#define IRQ_EP93XX_SSP1RX		45
-#define IRQ_EP93XX_SSP1TX		46
-#define IRQ_EP93XX_GPIO4MUX		47
-#define IRQ_EP93XX_GPIO5MUX		48
-#define IRQ_EP93XX_GPIO6MUX		49
-#define IRQ_EP93XX_GPIO7MUX		50
-#define IRQ_EP93XX_TIMER3		51
-#define IRQ_EP93XX_UART1		52
-#define IRQ_EP93XX_SSP			53
-#define IRQ_EP93XX_UART2		54
-#define IRQ_EP93XX_UART3		55
-#define IRQ_EP93XX_USB			56
-#define IRQ_EP93XX_ETHERNET_PME		57
-#define IRQ_EP93XX_DSP			58
-#define IRQ_EP93XX_GPIO_AB		59
-#define IRQ_EP93XX_SAI			60
-#define EP93XX_VIC2_VALID_IRQ_MASK	0x1fffffff
-
-#define NR_EP93XX_IRQS			(64 + 24)
-
-#define EP93XX_BOARD_IRQ(x)		(NR_EP93XX_IRQS + (x))
-#define EP93XX_BOARD_IRQS		32
-
-#define NR_IRQS				(NR_EP93XX_IRQS + EP93XX_BOARD_IRQS)
-
-
-#endif
diff --git a/include/asm-arm/arch-ep93xx/memory.h b/include/asm-arm/arch-ep93xx/memory.h
deleted file mode 100644
index 4b1a5c7..0000000
--- a/include/asm-arm/arch-ep93xx/memory.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET		UL(0x00000000)
-
-#define __bus_to_virt(x)	__phys_to_virt(x)
-#define __virt_to_bus(x)	__virt_to_phys(x)
-
-
-#endif
diff --git a/include/asm-arm/arch-ep93xx/platform.h b/include/asm-arm/arch-ep93xx/platform.h
deleted file mode 100644
index 44eccec..0000000
--- a/include/asm-arm/arch-ep93xx/platform.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/platform.h
- */
-
-#ifndef __ASSEMBLY__
-
-void ep93xx_map_io(void);
-void ep93xx_init_irq(void);
-void ep93xx_init_time(unsigned long);
-void ep93xx_init_devices(void);
-extern struct sys_timer ep93xx_timer;
-
-struct ep93xx_eth_data
-{
-	unsigned char	dev_addr[6];
-	unsigned char	phy_id;
-};
-
-
-#endif
diff --git a/include/asm-arm/arch-ep93xx/system.h b/include/asm-arm/arch-ep93xx/system.h
deleted file mode 100644
index f1a5acf..0000000
--- a/include/asm-arm/arch-ep93xx/system.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/system.h
- */
-
-#include <asm/arch/hardware.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	u32 devicecfg;
-
-	local_irq_disable();
-
-	devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
-
-	while (1)
-		;
-}
diff --git a/include/asm-arm/arch-ep93xx/timex.h b/include/asm-arm/arch-ep93xx/timex.h
deleted file mode 100644
index 4140bdd..0000000
--- a/include/asm-arm/arch-ep93xx/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/timex.h
- */
-
-#define CLOCK_TICK_RATE		983040
diff --git a/include/asm-arm/arch-ep93xx/ts72xx.h b/include/asm-arm/arch-ep93xx/ts72xx.h
deleted file mode 100644
index a94f63f..0000000
--- a/include/asm-arm/arch-ep93xx/ts72xx.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/ts72xx.h
- */
-
-/*
- * TS72xx memory map:
- *
- * virt		phys		size
- * febff000	22000000	4K	model number register
- * febfe000	22400000	4K	options register
- * febfd000	22800000	4K	options register #2
- * febfc000	[67]0000000	4K	NAND data register
- * febfb000	[67]0400000	4K	NAND control register
- * febfa000	[67]0800000	4K	NAND busy register
- * febf9000	10800000	4K	TS-5620 RTC index register
- * febf8000	11700000	4K	TS-5620 RTC data register
- */
-
-#define TS72XX_MODEL_PHYS_BASE		0x22000000
-#define TS72XX_MODEL_VIRT_BASE		0xfebff000
-#define TS72XX_MODEL_SIZE		0x00001000
-
-#define TS72XX_MODEL_TS7200		0x00
-#define TS72XX_MODEL_TS7250		0x01
-#define TS72XX_MODEL_TS7260		0x02
-
-
-#define TS72XX_OPTIONS_PHYS_BASE	0x22400000
-#define TS72XX_OPTIONS_VIRT_BASE	0xfebfe000
-#define TS72XX_OPTIONS_SIZE		0x00001000
-
-#define TS72XX_OPTIONS_COM2_RS485	0x02
-#define TS72XX_OPTIONS_MAX197		0x01
-
-
-#define TS72XX_OPTIONS2_PHYS_BASE	0x22800000
-#define TS72XX_OPTIONS2_VIRT_BASE	0xfebfd000
-#define TS72XX_OPTIONS2_SIZE		0x00001000
-
-#define TS72XX_OPTIONS2_TS9420		0x04
-#define TS72XX_OPTIONS2_TS9420_BOOT	0x02
-
-
-#define TS72XX_NOR_PHYS_BASE		0x60000000
-#define TS72XX_NOR2_PHYS_BASE		0x62000000
-
-#define TS72XX_NAND1_DATA_PHYS_BASE	0x60000000
-#define TS72XX_NAND2_DATA_PHYS_BASE	0x70000000
-#define TS72XX_NAND_DATA_VIRT_BASE	0xfebfc000
-#define TS72XX_NAND_DATA_SIZE		0x00001000
-
-#define TS72XX_NAND1_CONTROL_PHYS_BASE	0x60400000
-#define TS72XX_NAND2_CONTROL_PHYS_BASE	0x70400000
-#define TS72XX_NAND_CONTROL_VIRT_BASE	0xfebfb000
-#define TS72XX_NAND_CONTROL_SIZE	0x00001000
-
-#define TS72XX_NAND1_BUSY_PHYS_BASE	0x60800000
-#define TS72XX_NAND2_BUSY_PHYS_BASE	0x70800000
-#define TS72XX_NAND_BUSY_VIRT_BASE	0xfebfa000
-#define TS72XX_NAND_BUSY_SIZE		0x00001000
-
-
-#define TS72XX_RTC_INDEX_VIRT_BASE	0xfebf9000
-#define TS72XX_RTC_INDEX_PHYS_BASE	0x10800000
-#define TS72XX_RTC_INDEX_SIZE		0x00001000
-
-#define TS72XX_RTC_DATA_VIRT_BASE	0xfebf8000
-#define TS72XX_RTC_DATA_PHYS_BASE	0x11700000
-#define TS72XX_RTC_DATA_SIZE		0x00001000
-
-
-#ifndef __ASSEMBLY__
-#include <asm/io.h>
-
-static inline int board_is_ts7200(void)
-{
-	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200;
-}
-
-static inline int board_is_ts7250(void)
-{
-	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250;
-}
-
-static inline int board_is_ts7260(void)
-{
-	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260;
-}
-
-static inline int is_max197_installed(void)
-{
-	return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
-					TS72XX_OPTIONS_MAX197);
-}
-
-static inline int is_ts9420_installed(void)
-{
-	return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) &
-					TS72XX_OPTIONS2_TS9420);
-}
-#endif
diff --git a/include/asm-arm/arch-ep93xx/uncompress.h b/include/asm-arm/arch-ep93xx/uncompress.h
deleted file mode 100644
index c15274c..0000000
--- a/include/asm-arm/arch-ep93xx/uncompress.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/uncompress.h
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <asm/arch/ep93xx-regs.h>
-
-static unsigned char __raw_readb(unsigned int ptr)
-{
-	return *((volatile unsigned char *)ptr);
-}
-
-static unsigned int __raw_readl(unsigned int ptr)
-{
-	return *((volatile unsigned int *)ptr);
-}
-
-static void __raw_writeb(unsigned char value, unsigned int ptr)
-{
-	*((volatile unsigned char *)ptr) = value;
-}
-
-static void __raw_writel(unsigned int value, unsigned int ptr)
-{
-	*((volatile unsigned int *)ptr) = value;
-}
-
-
-#define PHYS_UART1_DATA		0x808c0000
-#define PHYS_UART1_FLAG		0x808c0018
-#define UART1_FLAG_TXFF		0x20
-
-static inline void putc(int c)
-{
-	int i;
-
-	for (i = 0; i < 1000; i++) {
-		/* Transmit fifo not full?  */
-		if (!(__raw_readb(PHYS_UART1_FLAG) & UART1_FLAG_TXFF))
-			break;
-	}
-
-	__raw_writeb(c, PHYS_UART1_DATA);
-}
-
-static inline void flush(void)
-{
-}
-
-
-/*
- * Some bootloaders don't turn off DMA from the ethernet MAC before
- * jumping to linux, which means that we might end up with bits of RX
- * status and packet data scribbled over the uncompressed kernel image.
- * Work around this by resetting the ethernet MAC before we uncompress.
- */
-#define PHYS_ETH_SELF_CTL		0x80010020
-#define ETH_SELF_CTL_RESET		0x00000001
-
-static void ethernet_reset(void)
-{
-	unsigned int v;
-
-	/* Reset the ethernet MAC.  */
-	v = __raw_readl(PHYS_ETH_SELF_CTL);
-	__raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL);
-
-	/* Wait for reset to finish.  */
-	while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET)
-		;
-}
-
-
-static void arch_decomp_setup(void)
-{
-	ethernet_reset();
-}
-
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-ep93xx/vmalloc.h b/include/asm-arm/arch-ep93xx/vmalloc.h
deleted file mode 100644
index 205ea6b..0000000
--- a/include/asm-arm/arch-ep93xx/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe800000
diff --git a/include/asm-arm/arch-h720x/boards.h b/include/asm-arm/arch-h720x/boards.h
deleted file mode 100644
index 8021f81..0000000
--- a/include/asm-arm/arch-h720x/boards.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/boards.h
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *
- * This file contains the board specific defines for various devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_INCMACH_H
-#error Do not include this file directly. Include asm/hardware.h instead !
-#endif
-
-/* Hynix H7202 developer board specific device defines */
-#ifdef CONFIG_ARCH_H7202
-
-/* FLASH */
-#define FLASH_VIRT		0xd0000000
-#define FLASH_PHYS		0x00000000
-#define FLASH_SIZE		0x02000000
-
-/* onboard LAN controller */
-# define ETH0_PHYS		0x08000000
-
-/* Touch screen defines */
-/* GPIO Port */
-#define PEN_GPIO		GPIO_B_VIRT
-/* Bitmask for pen down interrupt */
-#define PEN_INT_BIT		(1<<7)
-/* Bitmask for pen up interrupt */
-#define PEN_ENA_BIT		(1<<6)
-/* pen up interrupt */
-#define IRQ_PEN			IRQ_MUX_GPIOB(7)
-
-#endif
-
-/* Hynix H7201 developer board specific device defines */
-#if defined (CONFIG_ARCH_H7201)
-/* ROM DISK SPACE */
-#define ROM_DISK_BASE           0xc1800000
-#define ROM_DISK_START          0x41800000
-#define ROM_DISK_SIZE           0x00700000
-
-/* SRAM DISK SPACE */
-#define SRAM_DISK_BASE          0xf1000000
-#define SRAM_DISK_START         0x04000000
-#define SRAM_DISK_SIZE          0x00400000
-#endif
-
diff --git a/include/asm-arm/arch-h720x/debug-macro.S b/include/asm-arm/arch-h720x/debug-macro.S
deleted file mode 100644
index 82822d3..0000000
--- a/include/asm-arm/arch-h720x/debug-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/include/asm-arm/arch-h720x/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.equ    io_virt, IO_BASE
-		.equ    io_phys, IO_START
-
-		.macro  addruart,rx
-		mrc     p15, 0, \rx, c1, c0
-		tst     \rx, #1  	       @ MMU enabled?
-		moveq   \rx, #io_phys	       @ physical base address
-		movne   \rx, #io_virt	       @ virtual address
-		add     \rx, \rx, #0x00020000   @ UART1
-		.endm
-
-		.macro  senduart,rd,rx
-		str     \rd, [\rx, #0x0]        @ UARTDR
-
-		.endm
-
-		.macro  waituart,rd,rx
-1001:		ldr     \rd, [\rx, #0x18]       @ UARTFLG
-		tst     \rd, #1 << 5	       @ UARTFLGUTXFF - 1 when full
-		bne     1001b
-		.endm
-
-		.macro  busyuart,rd,rx
-1001:		ldr     \rd, [\rx, #0x18]       @ UARTFLG
-		tst     \rd, #1 << 3	       @ UARTFLGUBUSY - 1 when busy
-		bne     1001b
-		.endm
diff --git a/include/asm-arm/arch-h720x/dma.h b/include/asm-arm/arch-h720x/dma.h
deleted file mode 100644
index bfc6636..0000000
--- a/include/asm-arm/arch-h720x/dma.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/dma.h
- *
- * Architecture DMA routes
- *
- * Copyright (C) 1997.1998 Russell King
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS		0xd0000000
-
-#if defined (CONFIG_CPU_H7201)
-#define MAX_DMA_CHANNELS	3
-#elif defined (CONFIG_CPU_H7202)
-#define MAX_DMA_CHANNELS	4
-#else
-#error processor definition missmatch
-#endif
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-h720x/entry-macro.S b/include/asm-arm/arch-h720x/entry-macro.S
deleted file mode 100644
index 38dd63a..0000000
--- a/include/asm-arm/arch-h720x/entry-macro.S
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * include/asm-arm/arch-h720x/entry-macro.S
- *
- * Low-level IRQ helper macros for Hynix HMS720x based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-		.macro  disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202)
-		@ we could use the id register on H7202, but this is not
-		@ properly updated when we come back from asm_do_irq
-		@ without a previous return from interrupt
-		@ (see loops below in irq_svc, irq_usr)
-		@ We see unmasked pending ints only, as the masked pending ints
-		@ are not visible here
-
-		mov     \base, #0xf0000000	       @ base register
-		orr     \base, \base, #0x24000	       @ irqbase
-		ldr     \irqstat, [\base, #0x04]        @ get interrupt status
-#if defined (CONFIG_CPU_H7201)
-		ldr	\tmp, =0x001fffff
-#else
-		mvn     \tmp, #0xc0000000
-#endif
-		and     \irqstat, \irqstat, \tmp        @ mask out unused ints
-		mov     \irqnr, #0
-
-		mov     \tmp, #0xff00
-		orr     \tmp, \tmp, #0xff
-		tst     \irqstat, \tmp
-		addeq   \irqnr, \irqnr, #16
-		moveq   \irqstat, \irqstat, lsr #16
-		tst     \irqstat, #255
-		addeq   \irqnr, \irqnr, #8
-		moveq   \irqstat, \irqstat, lsr #8
-		tst     \irqstat, #15
-		addeq   \irqnr, \irqnr, #4
-		moveq   \irqstat, \irqstat, lsr #4
-		tst     \irqstat, #3
-		addeq   \irqnr, \irqnr, #2
-		moveq   \irqstat, \irqstat, lsr #2
-		tst     \irqstat, #1
-		addeq   \irqnr, \irqnr, #1
-		moveq   \irqstat, \irqstat, lsr #1
-		tst     \irqstat, #1		       @ bit 0 should be set
-		.endm
-
-		.macro  irq_prio_table
-		.endm
-
-#else
-#error hynix processor selection missmatch
-#endif
-
diff --git a/include/asm-arm/arch-h720x/h7201-regs.h b/include/asm-arm/arch-h720x/h7201-regs.h
deleted file mode 100644
index 49d4f6b..0000000
--- a/include/asm-arm/arch-h720x/h7201-regs.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/h7201-regs.h
- *
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *           (C) 2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * This file contains the hardware definitions of the h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Do not add implementations specific defines here. This files contains
- * only defines of the onchip peripherals. Add those defines to boards.h,
- * which is included by this file.
- */
-
-#define SERIAL2_VIRT 		(IO_VIRT + 0x50100)
-#define SERIAL3_VIRT 		(IO_VIRT + 0x50200)
-
-/*
- * PCMCIA
- */
-#define PCMCIA0_ATT_BASE        0xe5000000
-#define PCMCIA0_ATT_SIZE        0x00200000
-#define PCMCIA0_ATT_START       0x20000000
-#define PCMCIA0_MEM_BASE        0xe5200000
-#define PCMCIA0_MEM_SIZE        0x00200000
-#define PCMCIA0_MEM_START       0x24000000
-#define PCMCIA0_IO_BASE         0xe5400000
-#define PCMCIA0_IO_SIZE         0x00200000
-#define PCMCIA0_IO_START        0x28000000
-
-#define PCMCIA1_ATT_BASE        0xe5600000
-#define PCMCIA1_ATT_SIZE        0x00200000
-#define PCMCIA1_ATT_START       0x30000000
-#define PCMCIA1_MEM_BASE        0xe5800000
-#define PCMCIA1_MEM_SIZE        0x00200000
-#define PCMCIA1_MEM_START       0x34000000
-#define PCMCIA1_IO_BASE         0xe5a00000
-#define PCMCIA1_IO_SIZE         0x00200000
-#define PCMCIA1_IO_START        0x38000000
-
-#define PRIME3C_BASE            0xf0050000
-#define PRIME3C_SIZE            0x00001000
-#define PRIME3C_START           0x10000000
-
-/* VGA Controller */
-#define VGA_RAMBASE 		0x50
-#define VGA_TIMING0 		0x60
-#define VGA_TIMING1 		0x64
-#define VGA_TIMING2 		0x68
-#define VGA_TIMING3 		0x6c
-
-#define LCD_CTRL_VGA_ENABLE   	0x00000100
-#define LCD_CTRL_VGA_BPP_MASK 	0x00000600
-#define LCD_CTRL_VGA_4BPP    	0x00000000
-#define LCD_CTRL_VGA_8BPP    	0x00000200
-#define LCD_CTRL_VGA_16BPP   	0x00000300
-#define LCD_CTRL_SHARE_DMA    	0x00000800
-#define LCD_CTRL_VDE          	0x00100000
-#define LCD_CTRL_LPE          	0x00400000	/* LCD Power enable */
-#define LCD_CTRL_BLE          	0x00800000	/* LCD backlight enable */
-
-#define VGA_PALETTE_BASE	(IO_VIRT + 0x10800)
diff --git a/include/asm-arm/arch-h720x/h7202-regs.h b/include/asm-arm/arch-h720x/h7202-regs.h
deleted file mode 100644
index 43d8ba8..0000000
--- a/include/asm-arm/arch-h720x/h7202-regs.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/h7202-regs.h
- *
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *           (C) 2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * This file contains the hardware definitions of the h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Do not add implementations specific defines here. This files contains
- * only defines of the onchip peripherals. Add those defines to boards.h,
- * which is included by this file.
- */
-
-#define SERIAL2_OFS		0x2d000
-#define SERIAL2_BASE		(IO_PHYS + SERIAL2_OFS)
-#define SERIAL2_VIRT 		(IO_VIRT + SERIAL2_OFS)
-#define SERIAL3_OFS		0x2e000
-#define SERIAL3_BASE		(IO_PHYS + SERIAL3_OFS)
-#define SERIAL3_VIRT 		(IO_VIRT + SERIAL3_OFS)
-
-/* Matrix Keyboard Controller */
-#define KBD_VIRT		(IO_VIRT + 0x22000)
-#define KBD_KBCR		0x00
-#define KBD_KBSC		0x04
-#define KBD_KBTR		0x08
-#define KBD_KBVR0		0x0C
-#define KBD_KBVR1		0x10
-#define KBD_KBSR		0x18
-
-#define KBD_KBCR_SCANENABLE	(1 << 7)
-#define KBD_KBCR_NPOWERDOWN	(1 << 2)
-#define KBD_KBCR_CLKSEL_MASK	(3)
-#define KBD_KBCR_CLKSEL_PCLK2	0x0
-#define KBD_KBCR_CLKSEL_PCLK128	0x1
-#define KBD_KBCR_CLKSEL_PCLK256	0x2
-#define KBD_KBCR_CLKSEL_PCLK512	0x3
-
-#define KBD_KBSR_INTR		(1 << 0)
-#define KBD_KBSR_WAKEUP		(1 << 1)
-
-/* USB device controller */
-
-#define USBD_BASE		(IO_VIRT + 0x12000)
-#define USBD_LENGTH		0x3C
-
-#define USBD_GCTRL		0x00
-#define USBD_EPCTRL		0x04
-#define USBD_INTMASK		0x08
-#define USBD_INTSTAT		0x0C
-#define USBD_PWR		0x10
-#define USBD_DMARXTX		0x14
-#define USBD_DEVID		0x18
-#define USBD_DEVCLASS		0x1C
-#define USBD_INTCLASS		0x20
-#define USBD_SETUP0		0x24
-#define USBD_SETUP1		0x28
-#define USBD_ENDP0RD		0x2C
-#define USBD_ENDP0WT		0x30
-#define USBD_ENDP1RD		0x34
-#define USBD_ENDP2WT		0x38
-
-/* PS/2 port */
-#define PSDATA 0x00
-#define PSSTAT 0x04
-#define PSSTAT_TXEMPTY (1<<0)
-#define PSSTAT_TXBUSY (1<<1)
-#define PSSTAT_RXFULL (1<<2)
-#define PSSTAT_RXBUSY (1<<3)
-#define PSSTAT_CLKIN (1<<4)
-#define PSSTAT_DATAIN (1<<5)
-#define PSSTAT_PARITY (1<<6)
-
-#define PSCONF 0x08
-#define PSCONF_ENABLE (1<<0)
-#define PSCONF_TXINTEN (1<<2)
-#define PSCONF_RXINTEN (1<<3)
-#define PSCONF_FORCECLKLOW (1<<4)
-#define PSCONF_FORCEDATLOW (1<<5)
-#define PSCONF_LCE (1<<6)
-
-#define PSINTR 0x0C
-#define PSINTR_TXINT (1<<0)
-#define PSINTR_RXINT (1<<1)
-#define PSINTR_PAR (1<<2)
-#define PSINTR_RXTO (1<<3)
-#define PSINTR_TXTO (1<<4)
-
-#define PSTDLO 0x10 /* clk low before start transmission */
-#define PSTPRI 0x14 /* PRI clock */
-#define PSTXMT 0x18 /* maximum transmission time */
-#define PSTREC 0x20 /* maximum receive time */
-#define PSPWDN 0x3c
-
-/* ADC converter */
-#define ADC_BASE 		(IO_VIRT + 0x29000)
-#define ADC_CR 			0x00
-#define ADC_TSCTRL 		0x04
-#define ADC_BT_CTRL 		0x08
-#define ADC_MC_CTRL		0x0C
-#define ADC_STATUS		0x10
-
-/* ADC control register bits */
-#define ADC_CR_PW_CTRL 		0x80
-#define ADC_CR_DIRECTC		0x04
-#define ADC_CR_CONTIME_NO	0x00
-#define ADC_CR_CONTIME_2	0x04
-#define ADC_CR_CONTIME_4	0x08
-#define ADC_CR_CONTIME_ADE	0x0c
-#define ADC_CR_LONGCALTIME	0x01
-
-/* ADC touch panel register bits */
-#define ADC_TSCTRL_ENABLE 	0x80
-#define ADC_TSCTRL_INTR   	0x40
-#define	ADC_TSCTRL_SWBYPSS	0x20
-#define ADC_TSCTRL_SWINVT	0x10
-#define ADC_TSCTRL_S400   	0x03
-#define ADC_TSCTRL_S200   	0x02
-#define ADC_TSCTRL_S100   	0x01
-#define ADC_TSCTRL_S50    	0x00
-
-/* ADC Interrupt Status Register bits */
-#define ADC_STATUS_TS_BIT	0x80
-#define ADC_STATUS_MBT_BIT	0x40
-#define ADC_STATUS_BBT_BIT	0x20
-#define ADC_STATUS_MIC_BIT	0x10
-
-/* Touch data registers */
-#define ADC_TS_X0X1  		0x30
-#define ADC_TS_X2X3		0x34
-#define ADC_TS_Y0Y1		0x38
-#define ADC_TS_Y2Y3  		0x3c
-#define ADC_TS_X4X5  		0x40
-#define ADC_TS_X6X7  		0x44
-#define ADC_TS_Y4Y5		0x48
-#define ADC_TS_Y6Y7		0x50
-
-/* battery data */
-#define ADC_MB_DATA		0x54
-#define ADC_BB_DATA		0x58
-
-/* Sound data register */
-#define ADC_SD_DAT0 		0x60
-#define ADC_SD_DAT1		0x64
-#define ADC_SD_DAT2		0x68
-#define ADC_SD_DAT3		0x6c
-#define ADC_SD_DAT4		0x70
-#define ADC_SD_DAT5		0x74
-#define ADC_SD_DAT6		0x78
-#define ADC_SD_DAT7		0x7c
diff --git a/include/asm-arm/arch-h720x/hardware.h b/include/asm-arm/arch-h720x/hardware.h
deleted file mode 100644
index dfb7789..0000000
--- a/include/asm-arm/arch-h720x/hardware.h
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/hardware.h
- *
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *
- * This file contains the hardware definitions of the h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Do not add implementations specific defines here. This files contains
- * only defines of the onchip peripherals. Add those defines to boards.h,
- * which is included by this file.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define IOCLK (3686400L)
-
-/* Onchip peripherals */
-
-#define IO_VIRT			0xf0000000	/* IO peripherals */
-#define IO_PHYS			0x80000000
-#define IO_SIZE			0x00050000
-
-#ifdef CONFIG_CPU_H7202
-#include "h7202-regs.h"
-#elif defined CONFIG_CPU_H7201
-#include "h7201-regs.h"
-#else
-#error machine definition mismatch
-#endif
-
-/* Macro to access the CPU IO */
-#define CPU_IO(x) (*(volatile u32*)(x))
-
-/* Macro to access general purpose regs (base, offset) */
-#define CPU_REG(x,y) CPU_IO(x+y)
-
-/* Macro to access irq related regs */
-#define IRQ_REG(x) CPU_REG(IRQC_VIRT,x)
-
-/* CPU registers */
-/* general purpose I/O */
-#define GPIO_VIRT(x)		(IO_VIRT + 0x23000 + ((x)<<5))
-#define GPIO_A_VIRT		(GPIO_VIRT(0))
-#define GPIO_B_VIRT		(GPIO_VIRT(1))
-#define GPIO_C_VIRT		(GPIO_VIRT(2))
-#define GPIO_D_VIRT		(GPIO_VIRT(3))
-#define GPIO_E_VIRT		(GPIO_VIRT(4))
-#define GPIO_AMULSEL		(GPIO_VIRT(0) + 0xA4)
-
-#define AMULSEL_USIN2	(1<<5)
-#define AMULSEL_USOUT2	(1<<6)
-#define AMULSEL_USIN3	(1<<13)
-#define AMULSEL_USOUT3	(1<<14)
-#define AMULSEL_IRDIN	(1<<15)
-#define AMULSEL_IRDOUT	(1<<7)
-
-/* Register offsets general purpose I/O */
-#define GPIO_DATA		0x00
-#define GPIO_DIR		0x04
-#define GPIO_MASK		0x08
-#define GPIO_STAT		0x0C
-#define GPIO_EDGE		0x10
-#define GPIO_CLR		0x14
-#define GPIO_POL		0x18
-#define GPIO_EN			0x1C
-
-/*interrupt controller */
-#define IRQC_VIRT		(IO_VIRT + 0x24000)
-/* register offset interrupt controller */
-#define IRQC_IER		0x00
-#define IRQC_ISR		0x04
-
-/* timer unit */
-#define TIMER_VIRT		(IO_VIRT + 0x25000)
-/* Register offsets timer unit */
-#define TM0_PERIOD   		0x00
-#define TM0_COUNT    		0x08
-#define TM0_CTRL     		0x10
-#define TM1_PERIOD   		0x20
-#define TM1_COUNT    		0x28
-#define TM1_CTRL     		0x30
-#define TM2_PERIOD   		0x40
-#define TM2_COUNT    		0x48
-#define TM2_CTRL     		0x50
-#define TIMER_TOPCTRL		0x60
-#define TIMER_TOPSTAT		0x64
-#define T64_COUNTL		0x80
-#define T64_COUNTH		0x84
-#define T64_CTRL		0x88
-#define T64_BASEL		0x94
-#define T64_BASEH		0x98
-/* Bitmaks timer unit TOPSTAT reg */
-#define TSTAT_T0INT		0x1
-#define TSTAT_T1INT		0x2
-#define TSTAT_T2INT		0x4
-#define TSTAT_T3INT		0x8
-/* Bit description of TMx_CTRL register */
-#define TM_START  		0x1
-#define TM_REPEAT 		0x2
-#define TM_RESET  		0x4
-/* Bit description of TIMER_CTRL register */
-#define ENABLE_TM0_INTR  	0x1
-#define ENABLE_TM1_INTR  	0x2
-#define ENABLE_TM2_INTR  	0x4
-#define TIMER_ENABLE_BIT 	0x8
-#define ENABLE_TIMER64   	0x10
-#define ENABLE_TIMER64_INT	0x20
-
-/* PMU & PLL */
-#define PMU_BASE 		(IO_VIRT + 0x1000)
-#define PMU_MODE		0x00
-#define PMU_STAT   		0x20
-#define PMU_PLL_CTRL 		0x28
-
-/* PMU Mode bits */
-#define PMU_MODE_SLOW		0x00
-#define PMU_MODE_RUN		0x01
-#define PMU_MODE_IDLE		0x02
-#define PMU_MODE_SLEEP		0x03
-#define PMU_MODE_INIT		0x04
-#define PMU_MODE_DEEPSLEEP	0x07
-#define PMU_MODE_WAKEUP		0x08
-
-/* PMU ... */
-#define PLL_2_EN		0x8000
-#define PLL_1_EN		0x4000
-#define PLL_3_MUTE		0x0080
-
-/* Control bits for PMU/ PLL */
-#define PMU_WARMRESET		0x00010000
-#define PLL_CTRL_MASK23		0x000080ff
-
-/* LCD Controller */
-#define LCD_BASE 		(IO_VIRT + 0x10000)
-#define LCD_CTRL 		0x00
-#define LCD_STATUS		0x04
-#define LCD_STATUS_M		0x08
-#define LCD_INTERRUPT		0x0C
-#define LCD_DBAR		0x10
-#define LCD_DCAR		0x14
-#define LCD_TIMING0 		0x20
-#define LCD_TIMING1 		0x24
-#define LCD_TIMING2 		0x28
-#define LCD_TEST		0x40
-
-/* LCD Control Bits */
-#define LCD_CTRL_LCD_ENABLE   	0x00000001
-/* Bits per pixel */
-#define LCD_CTRL_LCD_BPP_MASK 	0x00000006
-#define LCD_CTRL_LCD_4BPP    	0x00000000
-#define LCD_CTRL_LCD_8BPP    	0x00000002
-#define LCD_CTRL_LCD_16BPP   	0x00000004
-#define LCD_CTRL_LCD_BW		0x00000008
-#define LCD_CTRL_LCD_TFT	0x00000010
-#define LCD_CTRL_BGR		0x00001000
-#define LCD_CTRL_LCD_VCOMP	0x00080000
-#define LCD_CTRL_LCD_MONO8	0x00200000
-#define LCD_CTRL_LCD_PWR	0x00400000
-#define LCD_CTRL_LCD_BLE	0x00800000
-#define LCD_CTRL_LDBUSEN	0x01000000
-
-/* Palette */
-#define LCD_PALETTE_BASE 	(IO_VIRT + 0x10400)
-
-/* Serial ports */
-#define SERIAL0_OFS		0x20000
-#define SERIAL0_VIRT 		(IO_VIRT + SERIAL0_OFS)
-#define SERIAL0_BASE		(IO_PHYS + SERIAL0_OFS)
-
-#define SERIAL1_OFS		0x21000
-#define SERIAL1_VIRT 		(IO_VIRT + SERIAL1_OFS)
-#define SERIAL1_BASE		(IO_PHYS + SERIAL1_OFS)
-
-#define SERIAL_ENABLE		0x30
-#define SERIAL_ENABLE_EN	(1<<0)
-
-/* General defines to pacify gcc */
-#define PCIO_BASE 		(0)	/* for inb, outb and friends */
-#define PCIO_VIRT		PCIO_BASE
-
-#define __ASM_ARCH_HARDWARE_INCMACH_H
-#include "boards.h"
-#undef __ASM_ARCH_HARDWARE_INCMACH_H
-
-#endif				/* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-h720x/io.h b/include/asm-arm/arch-h720x/io.h
deleted file mode 100644
index 6881482..0000000
--- a/include/asm-arm/arch-h720x/io.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/io.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *
- *  09-19-2001	JJKIM
- *  		Created from linux/include/asm-arm/arch-l7200/io.h
- *
- *  03-27-2003  Robert Schwebel <r.schwebel@pengutronix.de>:
- *  		re-unified header files for h720x
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)		((void __iomem *)(a))
-#define __mem_pci(a)	(a)
-
-#endif
diff --git a/include/asm-arm/arch-h720x/irqs.h b/include/asm-arm/arch-h720x/irqs.h
deleted file mode 100644
index 8244413..0000000
--- a/include/asm-arm/arch-h720x/irqs.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/irqs.h
- *
- * Copyright (C) 2000 Jungjun Kim
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#if defined (CONFIG_CPU_H7201)
-
-#define IRQ_PMU		0		/* 0x000001 */
-#define IRQ_DMA		1 		/* 0x000002 */
-#define IRQ_LCD		2		/* 0x000004 */
-#define IRQ_VGA		3 		/* 0x000008 */
-#define IRQ_PCMCIA1 	4 		/* 0x000010 */
-#define IRQ_PCMCIA2 	5 		/* 0x000020 */
-#define IRQ_AFE		6 		/* 0x000040 */
-#define IRQ_AIC		7 		/* 0x000080 */
-#define IRQ_KEYBOARD 	8 		/* 0x000100 */
-#define IRQ_TIMER0	9 		/* 0x000200 */
-#define IRQ_RTC		10		/* 0x000400 */
-#define IRQ_SOUND	11		/* 0x000800 */
-#define IRQ_USB		12		/* 0x001000 */
-#define IRQ_IrDA 	13		/* 0x002000 */
-#define IRQ_UART0	14		/* 0x004000 */
-#define IRQ_UART1	15		/* 0x008000 */
-#define IRQ_SPI		16		/* 0x010000 */
-#define IRQ_GPIOA 	17		/* 0x020000 */
-#define IRQ_GPIOB	18		/* 0x040000 */
-#define IRQ_GPIOC	19		/* 0x080000 */
-#define IRQ_GPIOD	20		/* 0x100000 */
-#define IRQ_CommRX	21		/* 0x200000 */
-#define IRQ_CommTX	22		/* 0x400000 */
-#define IRQ_Soft	23		/* 0x800000 */
-
-#define NR_GLBL_IRQS	24
-
-#define IRQ_CHAINED_GPIOA(x)  (NR_GLBL_IRQS + x)
-#define IRQ_CHAINED_GPIOB(x)  (IRQ_CHAINED_GPIOA(32) + x)
-#define IRQ_CHAINED_GPIOC(x)  (IRQ_CHAINED_GPIOB(32) + x)
-#define IRQ_CHAINED_GPIOD(x)  (IRQ_CHAINED_GPIOC(32) + x)
-#define NR_IRQS               IRQ_CHAINED_GPIOD(32)
-
-/* Enable mask for multiplexed interrupts */
-#define IRQ_ENA_MUX	(1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) \
-			| (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD)
-
-
-#elif defined (CONFIG_CPU_H7202)
-
-#define IRQ_PMU		0		/* 0x00000001 */
-#define IRQ_DMA		1		/* 0x00000002 */
-#define IRQ_LCD		2		/* 0x00000004 */
-#define IRQ_SOUND	3		/* 0x00000008 */
-#define IRQ_I2S		4		/* 0x00000010 */
-#define IRQ_USB 	5		/* 0x00000020 */
-#define IRQ_MMC 	6		/* 0x00000040 */
-#define IRQ_RTC 	7		/* 0x00000080 */
-#define IRQ_UART0 	8		/* 0x00000100 */
-#define IRQ_UART1 	9		/* 0x00000200 */
-#define IRQ_UART2 	10		/* 0x00000400 */
-#define IRQ_UART3 	11		/* 0x00000800 */
-#define IRQ_KBD 	12		/* 0x00001000 */
-#define IRQ_PS2 	13		/* 0x00002000 */
-#define IRQ_AIC 	14		/* 0x00004000 */
-#define IRQ_TIMER0 	15		/* 0x00008000 */
-#define IRQ_TIMERX 	16		/* 0x00010000 */
-#define IRQ_WDT 	17		/* 0x00020000 */
-#define IRQ_CAN0 	18		/* 0x00040000 */
-#define IRQ_CAN1 	19		/* 0x00080000 */
-#define IRQ_EXT0 	20		/* 0x00100000 */
-#define IRQ_EXT1 	21		/* 0x00200000 */
-#define IRQ_GPIOA 	22		/* 0x00400000 */
-#define IRQ_GPIOB 	23		/* 0x00800000 */
-#define IRQ_GPIOC 	24		/* 0x01000000 */
-#define IRQ_GPIOD 	25		/* 0x02000000 */
-#define IRQ_GPIOE 	26		/* 0x04000000 */
-#define IRQ_COMMRX 	27		/* 0x08000000 */
-#define IRQ_COMMTX 	28		/* 0x10000000 */
-#define IRQ_SMC 	29		/* 0x20000000 */
-#define IRQ_Soft 	30		/* 0x40000000 */
-#define IRQ_RESERVED1 	31		/* 0x80000000 */
-#define NR_GLBL_IRQS	32
-
-#define NR_TIMERX_IRQS	3
-
-#define IRQ_CHAINED_GPIOA(x)  (NR_GLBL_IRQS + x)
-#define IRQ_CHAINED_GPIOB(x)  (IRQ_CHAINED_GPIOA(32) + x)
-#define IRQ_CHAINED_GPIOC(x)  (IRQ_CHAINED_GPIOB(32) + x)
-#define IRQ_CHAINED_GPIOD(x)  (IRQ_CHAINED_GPIOC(32) + x)
-#define IRQ_CHAINED_GPIOE(x)  (IRQ_CHAINED_GPIOD(32) + x)
-#define IRQ_CHAINED_TIMERX(x) (IRQ_CHAINED_GPIOE(32) + x)
-#define IRQ_TIMER1            (IRQ_CHAINED_TIMERX(0))
-#define IRQ_TIMER2            (IRQ_CHAINED_TIMERX(1))
-#define IRQ_TIMER64B          (IRQ_CHAINED_TIMERX(2))
-
-#define NR_IRQS		(IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS))
-
-/* Enable mask for multiplexed interrupts */
-#define IRQ_ENA_MUX	(1<<IRQ_TIMERX) | (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) | \
-			(1<<IRQ_GPIOC) 	| (1<<IRQ_GPIOD) | (1<<IRQ_GPIOE) | \
-			(1<<IRQ_TIMERX)
-
-#else
-#error cpu definition mismatch
-#endif
-
-/* decode irq number to register number */
-#define IRQ_TO_REGNO(irq) ((irq - NR_GLBL_IRQS) >> 5)
-#define IRQ_TO_BIT(irq) (1 << ((irq - NR_GLBL_IRQS) % 32))
-
-#endif
diff --git a/include/asm-arm/arch-h720x/memory.h b/include/asm-arm/arch-h720x/memory.h
deleted file mode 100644
index 53e923d..0000000
--- a/include/asm-arm/arch-h720x/memory.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/memory.h
- *
- * Copyright (c) 2000 Jungjun Kim
- *
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Page offset:
- *    ( 0xc0000000UL )
- */
-#define PHYS_OFFSET	UL(0x40000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- *
- * There is something to do here later !, Mar 2000, Jungjun Kim
- */
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-h720x/system.h b/include/asm-arm/arch-h720x/system.h
deleted file mode 100644
index ddba937..0000000
--- a/include/asm-arm/arch-h720x/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/system.h
- *
- * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * linux/include/asm-arm/arch-h720x/system.h
- *
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <asm/arch/hardware.h>
-
-static void arch_idle(void)
-{
-	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
-	nop();
-	nop();
-	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
-	nop();
-	nop();
-}
-
-
-static __inline__ void arch_reset(char mode)
-{
-	CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
-}
-
-#endif
diff --git a/include/asm-arm/arch-h720x/timex.h b/include/asm-arm/arch-h720x/timex.h
deleted file mode 100644
index 48a391c..0000000
--- a/include/asm-arm/arch-h720x/timex.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/timex.h
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_TIMEX
-#define __ASM_ARCH_TIMEX
-
-#define CLOCK_TICK_RATE		3686400
-
-#endif
diff --git a/include/asm-arm/arch-h720x/uncompress.h b/include/asm-arm/arch-h720x/uncompress.h
deleted file mode 100644
index 61584cd..0000000
--- a/include/asm-arm/arch-h720x/uncompress.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/uncompress.h
- *
- * Copyright (C) 2001-2002 Jungjun Kim
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/arch/hardware.h>
-
-#define LSR 	0x14
-#define TEMPTY 	0x40
-
-static inline void putc(int c)
-{
-	volatile unsigned char *p = (volatile unsigned char *)(IO_PHYS+0x20000);
-
-	/* wait until transmit buffer is empty */
-	while((p[LSR] & TEMPTY) == 0x0)
-		barrier();
-
-	/* write next character */
-	*p = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif
diff --git a/include/asm-arm/arch-h720x/vmalloc.h b/include/asm-arm/arch-h720x/vmalloc.h
deleted file mode 100644
index b4693cb..0000000
--- a/include/asm-arm/arch-h720x/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/vmalloc.h
- */
-
-#ifndef __ARCH_ARM_VMALLOC_H
-#define __ARCH_ARM_VMALLOC_H
-
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
-
-#endif
diff --git a/include/asm-arm/arch-imx/debug-macro.S b/include/asm-arm/arch-imx/debug-macro.S
deleted file mode 100644
index c611871..0000000
--- a/include/asm-arm/arch-imx/debug-macro.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/include/asm-arm/arch-imx/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x00000000	@ physical
-		movne	\rx, #0xe0000000	@ virtual
-		orreq	\rx, \rx, #0x00200000	@ physical
-		orr	\rx, \rx, #0x00006000	@ UART1 offset
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x40]	@ TXDATA
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #0x98]	@ SR2
-		tst	\rd, #1 << 3		@ TXDC
-		beq	1002b			@ wait until transmit done
-		.endm
diff --git a/include/asm-arm/arch-imx/entry-macro.S b/include/asm-arm/arch-imx/entry-macro.S
deleted file mode 100644
index 5dc0f30..0000000
--- a/include/asm-arm/arch-imx/entry-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-imx/entry-macro.S
- *
- * Low-level IRQ helper macros for iMX-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro	get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	arch_ret_to_user, tmp1, tmp2
-		.endm
-
-#define AITC_NIVECSR   0x40
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =IO_ADDRESS(IMX_AITC_BASE)
-		@ Load offset & priority of the highest priority
-		@ interrupt pending.
-		ldr	\irqstat, [\base, #AITC_NIVECSR]
-		@ Shift off the priority leaving the offset or
-		@ "interrupt number", use arithmetic shift to
-		@ transform illegal source (0xffff) as -1
-		mov	\irqnr, \irqstat, asr #16
-		adds	\tmp, \irqnr, #1
-		.endm
diff --git a/include/asm-arm/arch-imx/gpio.h b/include/asm-arm/arch-imx/gpio.h
deleted file mode 100644
index 4860232..0000000
--- a/include/asm-arm/arch-imx/gpio.h
+++ /dev/null
@@ -1,102 +0,0 @@
-#ifndef _IMX_GPIO_H
-
-#include <asm/arch/imx-regs.h>
-
-#define IMX_GPIO_ALLOC_MODE_NORMAL	0
-#define IMX_GPIO_ALLOC_MODE_NO_ALLOC	1
-#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC	2
-#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY	4
-#define IMX_GPIO_ALLOC_MODE_RELEASE	8
-
-extern int imx_gpio_request(unsigned gpio, const char *label);
-
-extern void imx_gpio_free(unsigned gpio);
-
-extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-					int alloc_mode, const char *label);
-
-extern int imx_gpio_direction_input(unsigned gpio);
-
-extern int imx_gpio_direction_output(unsigned gpio, int value);
-
-extern void __imx_gpio_set_value(unsigned gpio, int value);
-
-static inline int imx_gpio_get_value(unsigned gpio)
-{
-	return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK));
-}
-
-static inline void imx_gpio_set_value_inline(unsigned gpio, int value)
-{
-	unsigned long flags;
-
-	raw_local_irq_save(flags);
-	if(value)
-		DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK));
-	else
-		DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK));
-	raw_local_irq_restore(flags);
-}
-
-static inline void imx_gpio_set_value(unsigned gpio, int value)
-{
-	if(__builtin_constant_p(gpio))
-		imx_gpio_set_value_inline(gpio, value);
-	else
-		__imx_gpio_set_value(gpio, value);
-}
-
-extern int imx_gpio_to_irq(unsigned gpio);
-
-extern int imx_irq_to_gpio(unsigned irq);
-
-/*-------------------------------------------------------------------------*/
-
-/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions
- * to allow future extension of GPIO logic.
- */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return imx_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-	imx_gpio_free(gpio);
-}
-
-static inline  int gpio_direction_input(unsigned gpio)
-{
-	return imx_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-	return imx_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return imx_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	imx_gpio_set_value(gpio, value);
-}
-
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return imx_gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return imx_irq_to_gpio(irq);
-}
-
-
-#endif
diff --git a/include/asm-arm/arch-imx/hardware.h b/include/asm-arm/arch-imx/hardware.h
deleted file mode 100644
index 6542ca5..0000000
--- a/include/asm-arm/arch-imx/hardware.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imx/hardware.h
- *
- *  Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include "imx-regs.h"
-
-#ifndef __ASSEMBLY__
-# define __REG(x)	(*((volatile u32 *)IO_ADDRESS(x)))
-
-# define __REG2(x,y)        (*(volatile u32 *)((u32)&__REG(x) + (y)))
-#endif
-
-/*
- * Memory map
- */
-
-#define IMX_IO_PHYS		0x00200000
-#define IMX_IO_SIZE		0x00100000
-#define IMX_IO_BASE		0xe0000000
-
-#define IMX_CS0_PHYS		0x10000000
-#define IMX_CS0_SIZE		0x02000000
-#define IMX_CS0_VIRT		0xe8000000
-
-#define IMX_CS1_PHYS		0x12000000
-#define IMX_CS1_SIZE		0x01000000
-#define IMX_CS1_VIRT		0xea000000
-
-#define IMX_CS2_PHYS		0x13000000
-#define IMX_CS2_SIZE		0x01000000
-#define IMX_CS2_VIRT		0xeb000000
-
-#define IMX_CS3_PHYS		0x14000000
-#define IMX_CS3_SIZE		0x01000000
-#define IMX_CS3_VIRT		0xec000000
-
-#define IMX_CS4_PHYS		0x15000000
-#define IMX_CS4_SIZE		0x01000000
-#define IMX_CS4_VIRT		0xed000000
-
-#define IMX_CS5_PHYS		0x16000000
-#define IMX_CS5_SIZE		0x01000000
-#define IMX_CS5_VIRT		0xee000000
-
-#define IMX_FB_VIRT		0xF1000000
-#define IMX_FB_SIZE		(256*1024)
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
-
-#ifndef __ASSEMBLY__
-/*
- * Handy routine to set GPIO functions
- */
-extern void imx_gpio_mode( int gpio_mode );
-
-#endif
-
-#define MAXIRQNUM                       62
-#define MAXFIQNUM                       62
-#define MAXSWINUM                       62
-
-/*
- * Use SDRAM for memory
- */
-#define MEM_SIZE		0x01000000
-
-#ifdef CONFIG_ARCH_MX1ADS
-#include "mx1ads.h"
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-imx/io.h b/include/asm-arm/arch-imx/io.h
deleted file mode 100644
index 1a1d9bb..0000000
--- a/include/asm-arm/arch-imx/io.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imxads/io.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)		((void __iomem *)(a))
-#define __mem_pci(a)	(a)
-
-#endif
diff --git a/include/asm-arm/arch-imx/irqs.h b/include/asm-arm/arch-imx/irqs.h
deleted file mode 100644
index 238197c..0000000
--- a/include/asm-arm/arch-imx/irqs.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imxads/irqs.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ARM_IRQS_H__
-#define __ARM_IRQS_H__
-
-/* Use the imx definitions */
-#include <asm/arch/hardware.h>
-
-/*
- *  IMX Interrupt numbers
- *
- */
-#define INT_SOFTINT                 0
-#define CSI_INT                     6
-#define DSPA_MAC_INT                7
-#define DSPA_INT                    8
-#define COMP_INT                    9
-#define MSHC_XINT                   10
-#define GPIO_INT_PORTA              11
-#define GPIO_INT_PORTB              12
-#define GPIO_INT_PORTC              13
-#define LCDC_INT                    14
-#define SIM_INT                     15
-#define SIM_DATA_INT                16
-#define RTC_INT                     17
-#define RTC_SAMINT                  18
-#define UART2_MINT_PFERR            19
-#define UART2_MINT_RTS              20
-#define UART2_MINT_DTR              21
-#define UART2_MINT_UARTC            22
-#define UART2_MINT_TX               23
-#define UART2_MINT_RX               24
-#define UART1_MINT_PFERR            25
-#define UART1_MINT_RTS              26
-#define UART1_MINT_DTR              27
-#define UART1_MINT_UARTC            28
-#define UART1_MINT_TX               29
-#define UART1_MINT_RX               30
-#define VOICE_DAC_INT               31
-#define VOICE_ADC_INT               32
-#define PEN_DATA_INT                33
-#define PWM_INT                     34
-#define SDHC_INT                    35
-#define I2C_INT                     39
-#define CSPI_INT                    41
-#define SSI_TX_INT                  42
-#define SSI_TX_ERR_INT              43
-#define SSI_RX_INT                  44
-#define SSI_RX_ERR_INT              45
-#define TOUCH_INT                   46
-#define USBD_INT0                   47
-#define USBD_INT1                   48
-#define USBD_INT2                   49
-#define USBD_INT3                   50
-#define USBD_INT4                   51
-#define USBD_INT5                   52
-#define USBD_INT6                   53
-#define BTSYS_INT                   55
-#define BTTIM_INT                   56
-#define BTWUI_INT                   57
-#define TIM2_INT                    58
-#define TIM1_INT                    59
-#define DMA_ERR                     60
-#define DMA_INT                     61
-#define GPIO_INT_PORTD              62
-
-#define IMX_IRQS                         (64)
-
-/* note: the IMX has four gpio ports (A-D), but only
- *       the following pins are connected to the outside
- *       world:
- *
- * PORT A: bits 0-31
- * PORT B: bits 8-31
- * PORT C: bits 3-17
- * PORT D: bits 6-31
- *
- * We map these interrupts straight on. As a result we have
- * several holes in the interrupt mapping. We do this for two
- * reasons:
- *   - mapping the interrupts without holes would get
- *     far more complicated
- *   - Motorola could well decide to bring some processor
- *     with more pins connected
- */
-
-#define IRQ_GPIOA(x)  (IMX_IRQS + x)
-#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
-
-#define NR_IRQS (IRQ_GPIOD(32) + 1)
-#define IRQ_GPIO(x)
-#endif
diff --git a/include/asm-arm/arch-imx/memory.h b/include/asm-arm/arch-imx/memory.h
deleted file mode 100644
index 5ad9012..0000000
--- a/include/asm-arm/arch-imx/memory.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imx/memory.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MMU_H
-#define __ASM_ARCH_MMU_H
-
-#define PHYS_OFFSET	UL(0x08000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	(x - PAGE_OFFSET + PHYS_OFFSET)
-#define __bus_to_virt(x)	(x - PHYS_OFFSET + PAGE_OFFSET)
-
-#endif
diff --git a/include/asm-arm/arch-imx/mx1ads.h b/include/asm-arm/arch-imx/mx1ads.h
deleted file mode 100644
index d90fa4b..0000000
--- a/include/asm-arm/arch-imx/mx1ads.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * linux/include/asm-arm/arch-imx/mx1ads.h
- *
- * Copyright (C) 2004 Robert Schwebel, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#ifndef __ASM_ARCH_MX1ADS_H
-#define __ASM_ARCH_MX1ADS_H
-
-/* ------------------------------------------------------------------------ */
-/* Memory Map for the M9328MX1ADS (MX1ADS) Board                            */
-/* ------------------------------------------------------------------------ */
-
-#define MX1ADS_FLASH_PHYS		0x10000000
-#define MX1ADS_FLASH_SIZE		(16*1024*1024)
-
-#define IMX_FB_PHYS			(0x0C000000 - 0x40000)
-
-#define CLK32 32000
-
-#endif /* __ASM_ARCH_MX1ADS_H */
diff --git a/include/asm-arm/arch-imx/spi_imx.h b/include/asm-arm/arch-imx/spi_imx.h
deleted file mode 100644
index 2165449..0000000
--- a/include/asm-arm/arch-imx/spi_imx.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * include/asm-arm/arch-imx/spi_imx.h
- *
- * Copyright (C) 2006 SWAPP
- *	Andrea Paterniani <a.paterniani@swapp-eng.it>
- *
- * Initial version inspired by:
- *	linux-2.6.17-rc3-mm1/include/asm-arm/arch-pxa/pxa2xx_spi.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef SPI_IMX_H_
-#define SPI_IMX_H_
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_master - device.platform_data for SPI controller devices.
- * @num_chipselect: chipselects are used to distinguish individual
- *	SPI slaves, and are numbered from zero to num_chipselects - 1.
- *	each slave has a chipselect signal, but it's common that not
- *	every chipselect is connected to a slave.
- * @enable_dma: if true enables DMA driven transfers.
-*/
-struct spi_imx_master {
-	u8 num_chipselect;
-	u8 enable_dma:1;
-};
-/*-------------------------------------------------------------------------*/
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_chip - spi_board_info.controller_data for SPI
- * slave devices, copied to spi_device.controller_data.
- * @enable_loopback : used for test purpouse to internally connect RX and TX
- *	sections.
- * @enable_dma : enables dma transfer (provided that controller driver has
- *	dma enabled too).
- * @ins_ss_pulse : enable /SS pulse insertion between SPI burst.
- * @bclk_wait : number of bclk waits between each bits_per_word SPI burst.
- * @cs_control : function pointer to board-specific function to assert/deassert
- *	I/O port to control HW generation of devices chip-select.
-*/
-struct spi_imx_chip {
-	u8	enable_loopback:1;
-	u8	enable_dma:1;
-	u8	ins_ss_pulse:1;
-	u16	bclk_wait:15;
-	void (*cs_control)(u32 control);
-};
-
-/* Chip-select state */
-#define SPI_CS_ASSERT			(1 << 0)
-#define SPI_CS_DEASSERT			(1 << 1)
-/*-------------------------------------------------------------------------*/
-
-
-#endif /* SPI_IMX_H_*/
diff --git a/include/asm-arm/arch-imx/system.h b/include/asm-arm/arch-imx/system.h
deleted file mode 100644
index c645fe9a..0000000
--- a/include/asm-arm/arch-imx/system.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imxads/system.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void
-arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-static inline void
-arch_reset(char mode)
-{
-	cpu_reset(0);
-}
-
-#endif
diff --git a/include/asm-arm/arch-imx/uncompress.h b/include/asm-arm/arch-imx/uncompress.h
deleted file mode 100644
index da333f6..0000000
--- a/include/asm-arm/arch-imx/uncompress.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imxads/uncompress.h
- *
- *
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
-
-#define UART1_BASE 0x206000
-#define UART2_BASE 0x207000
-#define USR2 0x98
-#define USR2_TXFE (1<<14)
-#define TXR  0x40
-#define UCR1 0x80
-#define UCR1_UARTEN 1
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
-	unsigned long serial_port;
-
-	do {
-		serial_port = UART1_BASE;
-		if ( UART(UCR1) & UCR1_UARTEN )
-			break;
-		serial_port = UART2_BASE;
-		if ( UART(UCR1) & UCR1_UARTEN )
-			break;
-		return;
-	} while(0);
-
-	while (!(UART(USR2) & USR2_TXFE))
-		barrier();
-
-	UART(TXR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-imx/vmalloc.h b/include/asm-arm/arch-imx/vmalloc.h
deleted file mode 100644
index cb61691..0000000
--- a/include/asm-arm/arch-imx/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imx/vmalloc.h
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-integrator/debug-macro.S b/include/asm-arm/arch-integrator/debug-macro.S
deleted file mode 100644
index 85b327c3..0000000
--- a/include/asm-arm/arch-integrator/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/include/asm-arm/arch-integrator/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x16000000	@ physical base address
-		movne	\rx, #0xf0000000	@ virtual base
-		addne	\rx, \rx, #0x16000000 >> 4
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/include/asm-arm/arch-integrator/dma.h b/include/asm-arm/arch-integrator/dma.h
deleted file mode 100644
index 83fd6bb..0000000
--- a/include/asm-arm/arch-integrator/dma.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-integrator/entry-macro.S b/include/asm-arm/arch-integrator/entry-macro.S
deleted file mode 100644
index ef535a6..0000000
--- a/include/asm-arm/arch-integrator/entry-macro.S
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-arm/arch-integrator/entry-macro.S
- *
- * Low-level IRQ helper macros for Integrator platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-#include <asm/arch/irqs.h>
-
- 		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-/* FIXME: should not be using soo many LDRs here */
-		ldr	\base, =IO_ADDRESS(INTEGRATOR_IC_BASE)
-		mov	\irqnr, #IRQ_PIC_START
-		ldr	\irqstat, [\base, #IRQ_STATUS]		@ get masked status
-		ldr	\base, =IO_ADDRESS(INTEGRATOR_HDR_BASE)
-		teq	\irqstat, #0
-		ldreq	\irqstat, [\base, #(INTEGRATOR_HDR_IC_OFFSET+IRQ_STATUS)]
-		moveq	\irqnr, #IRQ_CIC_START
-
-1001:		tst	\irqstat, #15
-		bne	1002f
-		add	\irqnr, \irqnr, #4
-		movs	\irqstat, \irqstat, lsr #4
-		bne	1001b
-1002:		tst	\irqstat, #1
-		bne	1003f
-		add	\irqnr, \irqnr, #1
-		movs	\irqstat, \irqstat, lsr #1
-		bne	1002b
-1003:		/* EQ will be set if no irqs pending */
-		.endm
-
diff --git a/include/asm-arm/arch-integrator/hardware.h b/include/asm-arm/arch-integrator/hardware.h
deleted file mode 100644
index 6f0947b..0000000
--- a/include/asm-arm/arch-integrator/hardware.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/hardware.h
- *
- *  This file contains the hardware definitions of the Integrator.
- *
- *  Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <asm/arch/platform.h>
-
-/*
- * Where in virtual memory the IO devices (timers, system controllers
- * and so on)
- */
-#define IO_BASE			0xF0000000                 // VA of IO 
-#define IO_SIZE			0x0B000000                 // How much?
-#define IO_START		INTEGRATOR_HDR_BASE        // PA of IO
-
-#define PCIO_BASE		PCI_IO_VADDR
-#define PCIMEM_BASE		PCI_MEMORY_VADDR
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) 
-
-#define pcibios_assign_all_busses()	1
-
-#define PCIBIOS_MIN_IO		0x6000
-#define PCIBIOS_MIN_MEM 	0x00100000
-
-#endif
-
diff --git a/include/asm-arm/arch-integrator/io.h b/include/asm-arm/arch-integrator/io.h
deleted file mode 100644
index c8f2175..0000000
--- a/include/asm-arm/arch-integrator/io.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/io.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffff
-
-/*
- * WARNING: this has to mirror definitions in platform.h
- */
-#define PCI_MEMORY_VADDR        0xe8000000
-#define PCI_CONFIG_VADDR        0xec000000
-#define PCI_V3_VADDR            0xed000000
-#define PCI_IO_VADDR            0xee000000
-
-#define __io(a)			((void __iomem *)(PCI_IO_VADDR + (a)))
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-integrator/irqs.h b/include/asm-arm/arch-integrator/irqs.h
deleted file mode 100644
index ba7b3af..0000000
--- a/include/asm-arm/arch-integrator/irqs.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/irqs.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/* 
- *  Interrupt numbers
- */
-#define IRQ_PIC_START			0
-#define IRQ_SOFTINT			0
-#define IRQ_UARTINT0			1
-#define IRQ_UARTINT1			2
-#define IRQ_KMIINT0			3
-#define IRQ_KMIINT1			4
-#define IRQ_TIMERINT0			5
-#define IRQ_TIMERINT1			6
-#define IRQ_TIMERINT2			7
-#define IRQ_RTCINT			8
-#define IRQ_AP_EXPINT0			9
-#define IRQ_AP_EXPINT1			10
-#define IRQ_AP_EXPINT2			11
-#define IRQ_AP_EXPINT3			12
-#define IRQ_AP_PCIINT0			13
-#define IRQ_AP_PCIINT1			14
-#define IRQ_AP_PCIINT2			15
-#define IRQ_AP_PCIINT3			16
-#define IRQ_AP_V3INT			17
-#define IRQ_AP_CPINT0			18
-#define IRQ_AP_CPINT1			19
-#define IRQ_AP_LBUSTIMEOUT 		20
-#define IRQ_AP_APCINT			21
-#define IRQ_CP_CLCDCINT			22
-#define IRQ_CP_MMCIINT0			23
-#define IRQ_CP_MMCIINT1			24
-#define IRQ_CP_AACIINT			25
-#define IRQ_CP_CPPLDINT			26
-#define IRQ_CP_ETHINT			27
-#define IRQ_CP_TSPENINT			28
-#define IRQ_PIC_END			31
-
-#define IRQ_CIC_START			32
-#define IRQ_CM_SOFTINT			32
-#define IRQ_CM_COMMRX			33
-#define IRQ_CM_COMMTX			34
-#define IRQ_CIC_END			34
-
-/*
- * IntegratorCP only
- */
-#define IRQ_SIC_START			35
-#define IRQ_SIC_CP_SOFTINT		35
-#define IRQ_SIC_CP_RI0			36
-#define IRQ_SIC_CP_RI1			37
-#define IRQ_SIC_CP_CARDIN		38
-#define IRQ_SIC_CP_LMINT0		39
-#define IRQ_SIC_CP_LMINT1		40
-#define IRQ_SIC_CP_LMINT2		41
-#define IRQ_SIC_CP_LMINT3		42
-#define IRQ_SIC_CP_LMINT4		43
-#define IRQ_SIC_CP_LMINT5		44
-#define IRQ_SIC_CP_LMINT6		45
-#define IRQ_SIC_CP_LMINT7		46
-#define IRQ_SIC_END			46
-
-#define NR_IRQS                         47
-
diff --git a/include/asm-arm/arch-integrator/memory.h b/include/asm-arm/arch-integrator/memory.h
deleted file mode 100644
index 1ab56d7..0000000
--- a/include/asm-arm/arch-integrator/memory.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/memory.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x00000000)
-#define BUS_OFFSET	UL(0x80000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	(x - PAGE_OFFSET + BUS_OFFSET)
-#define __bus_to_virt(x)	(x - BUS_OFFSET + PAGE_OFFSET)
-
-#endif
diff --git a/include/asm-arm/arch-integrator/system.h b/include/asm-arm/arch-integrator/system.h
deleted file mode 100644
index 8ea4422..0000000
--- a/include/asm-arm/arch-integrator/system.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/system.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/cm.h>
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
-}
-
-#endif
diff --git a/include/asm-arm/arch-integrator/timex.h b/include/asm-arm/arch-integrator/timex.h
deleted file mode 100644
index 87a7628..0000000
--- a/include/asm-arm/arch-integrator/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/timex.h
- *
- *  Integrator architecture timex specifications
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * ??
- */
-#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/include/asm-arm/arch-integrator/uncompress.h b/include/asm-arm/arch-integrator/uncompress.h
deleted file mode 100644
index f61825c..0000000
--- a/include/asm-arm/arch-integrator/uncompress.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/uncompress.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define AMBA_UART_DR	(*(volatile unsigned char *)0x16000000)
-#define AMBA_UART_LCRH	(*(volatile unsigned char *)0x16000008)
-#define AMBA_UART_LCRM	(*(volatile unsigned char *)0x1600000c)
-#define AMBA_UART_LCRL	(*(volatile unsigned char *)0x16000010)
-#define AMBA_UART_CR	(*(volatile unsigned char *)0x16000014)
-#define AMBA_UART_FR	(*(volatile unsigned char *)0x16000018)
-
-/*
- * This does not append a newline
- */
-static void putc(int c)
-{
-	while (AMBA_UART_FR & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR = c;
-}
-
-static inline void flush(void)
-{
-	while (AMBA_UART_FR & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-integrator/vmalloc.h b/include/asm-arm/arch-integrator/vmalloc.h
deleted file mode 100644
index 170ccce..0000000
--- a/include/asm-arm/arch-integrator/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/vmalloc.h
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-iop13xx/adma.h b/include/asm-arm/arch-iop13xx/adma.h
deleted file mode 100644
index 26f60af..0000000
--- a/include/asm-arm/arch-iop13xx/adma.h
+++ /dev/null
@@ -1,537 +0,0 @@
-/*
- * Copyright(c) 2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-#ifndef _ADMA_H
-#define _ADMA_H
-#include <linux/types.h>
-#include <linux/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/hardware/iop_adma.h>
-
-#define ADMA_ACCR(chan)	(chan->mmr_base + 0x0)
-#define ADMA_ACSR(chan)	(chan->mmr_base + 0x4)
-#define ADMA_ADAR(chan)	(chan->mmr_base + 0x8)
-#define ADMA_IIPCR(chan)	(chan->mmr_base + 0x18)
-#define ADMA_IIPAR(chan)	(chan->mmr_base + 0x1c)
-#define ADMA_IIPUAR(chan)	(chan->mmr_base + 0x20)
-#define ADMA_ANDAR(chan)	(chan->mmr_base + 0x24)
-#define ADMA_ADCR(chan)	(chan->mmr_base + 0x28)
-#define ADMA_CARMD(chan)	(chan->mmr_base + 0x2c)
-#define ADMA_ABCR(chan)	(chan->mmr_base + 0x30)
-#define ADMA_DLADR(chan)	(chan->mmr_base + 0x34)
-#define ADMA_DUADR(chan)	(chan->mmr_base + 0x38)
-#define ADMA_SLAR(src, chan)	(chan->mmr_base + (0x3c + (src << 3)))
-#define ADMA_SUAR(src, chan)	(chan->mmr_base + (0x40 + (src << 3)))
-
-struct iop13xx_adma_src {
-	u32 src_addr;
-	union {
-		u32 upper_src_addr;
-		struct {
-			unsigned int pq_upper_src_addr:24;
-			unsigned int pq_dmlt:8;
-		};
-	};
-};
-
-struct iop13xx_adma_desc_ctrl {
-	unsigned int int_en:1;
-	unsigned int xfer_dir:2;
-	unsigned int src_select:4;
-	unsigned int zero_result:1;
-	unsigned int block_fill_en:1;
-	unsigned int crc_gen_en:1;
-	unsigned int crc_xfer_dis:1;
-	unsigned int crc_seed_fetch_dis:1;
-	unsigned int status_write_back_en:1;
-	unsigned int endian_swap_en:1;
-	unsigned int reserved0:2;
-	unsigned int pq_update_xfer_en:1;
-	unsigned int dual_xor_en:1;
-	unsigned int pq_xfer_en:1;
-	unsigned int p_xfer_dis:1;
-	unsigned int reserved1:10;
-	unsigned int relax_order_en:1;
-	unsigned int no_snoop_en:1;
-};
-
-struct iop13xx_adma_byte_count {
-	unsigned int byte_count:24;
-	unsigned int host_if:3;
-	unsigned int reserved:2;
-	unsigned int zero_result_err_q:1;
-	unsigned int zero_result_err:1;
-	unsigned int tx_complete:1;
-};
-
-struct iop13xx_adma_desc_hw {
-	u32 next_desc;
-	union {
-		u32 desc_ctrl;
-		struct iop13xx_adma_desc_ctrl desc_ctrl_field;
-	};
-	union {
-		u32 crc_addr;
-		u32 block_fill_data;
-		u32 q_dest_addr;
-	};
-	union {
-		u32 byte_count;
-		struct iop13xx_adma_byte_count byte_count_field;
-	};
-	union {
-		u32 dest_addr;
-		u32 p_dest_addr;
-	};
-	union {
-		u32 upper_dest_addr;
-		u32 pq_upper_dest_addr;
-	};
-	struct iop13xx_adma_src src[1];
-};
-
-struct iop13xx_adma_desc_dual_xor {
-	u32 next_desc;
-	u32 desc_ctrl;
-	u32 reserved;
-	u32 byte_count;
-	u32 h_dest_addr;
-	u32 h_upper_dest_addr;
-	u32 src0_addr;
-	u32 upper_src0_addr;
-	u32 src1_addr;
-	u32 upper_src1_addr;
-	u32 h_src_addr;
-	u32 h_upper_src_addr;
-	u32 d_src_addr;
-	u32 d_upper_src_addr;
-	u32 d_dest_addr;
-	u32 d_upper_dest_addr;
-};
-
-struct iop13xx_adma_desc_pq_update {
-	u32 next_desc;
-	u32 desc_ctrl;
-	u32 reserved;
-	u32 byte_count;
-	u32 p_dest_addr;
-	u32 p_upper_dest_addr;
-	u32 src0_addr;
-	u32 upper_src0_addr;
-	u32 src1_addr;
-	u32 upper_src1_addr;
-	u32 p_src_addr;
-	u32 p_upper_src_addr;
-	u32 q_src_addr;
-	struct {
-		unsigned int q_upper_src_addr:24;
-		unsigned int q_dmlt:8;
-	};
-	u32 q_dest_addr;
-	u32 q_upper_dest_addr;
-};
-
-static inline int iop_adma_get_max_xor(void)
-{
-	return 16;
-}
-
-static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
-{
-	return __raw_readl(ADMA_ADAR(chan));
-}
-
-static inline void iop_chan_set_next_descriptor(struct iop_adma_chan *chan,
-						u32 next_desc_addr)
-{
-	__raw_writel(next_desc_addr, ADMA_ANDAR(chan));
-}
-
-#define ADMA_STATUS_BUSY (1 << 13)
-
-static inline char iop_chan_is_busy(struct iop_adma_chan *chan)
-{
-	if (__raw_readl(ADMA_ACSR(chan)) &
-		ADMA_STATUS_BUSY)
-		return 1;
-	else
-		return 0;
-}
-
-static inline int
-iop_chan_get_desc_align(struct iop_adma_chan *chan, int num_slots)
-{
-	return 1;
-}
-#define iop_desc_is_aligned(x, y) 1
-
-static inline int
-iop_chan_memcpy_slot_count(size_t len, int *slots_per_op)
-{
-	*slots_per_op = 1;
-	return 1;
-}
-
-#define iop_chan_interrupt_slot_count(s, c) iop_chan_memcpy_slot_count(0, s)
-
-static inline int
-iop_chan_memset_slot_count(size_t len, int *slots_per_op)
-{
-	*slots_per_op = 1;
-	return 1;
-}
-
-static inline int
-iop_chan_xor_slot_count(size_t len, int src_cnt, int *slots_per_op)
-{
-	static const char slot_count_table[] = { 1, 2, 2, 2,
-						 2, 3, 3, 3,
-						 3, 4, 4, 4,
-						 4, 5, 5, 5,
-						};
-	*slots_per_op = slot_count_table[src_cnt - 1];
-	return *slots_per_op;
-}
-
-#define ADMA_MAX_BYTE_COUNT	(16 * 1024 * 1024)
-#define IOP_ADMA_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
-#define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
-#define IOP_ADMA_XOR_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
-#define iop_chan_zero_sum_slot_count(l, s, o) iop_chan_xor_slot_count(l, s, o)
-
-static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	return hw_desc->dest_addr;
-}
-
-static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	return hw_desc->byte_count_field.byte_count;
-}
-
-static inline u32 iop_desc_get_src_addr(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan,
-					int src_idx)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	return hw_desc->src[src_idx].src_addr;
-}
-
-static inline u32 iop_desc_get_src_count(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	return hw_desc->desc_ctrl_field.src_select + 1;
-}
-
-static inline void
-iop_desc_init_memcpy(struct iop_adma_desc_slot *desc, unsigned long flags)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	union {
-		u32 value;
-		struct iop13xx_adma_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = 0;
-	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
-	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-	hw_desc->desc_ctrl = u_desc_ctrl.value;
-	hw_desc->crc_addr = 0;
-}
-
-static inline void
-iop_desc_init_memset(struct iop_adma_desc_slot *desc, unsigned long flags)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	union {
-		u32 value;
-		struct iop13xx_adma_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = 0;
-	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
-	u_desc_ctrl.field.block_fill_en = 1;
-	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-	hw_desc->desc_ctrl = u_desc_ctrl.value;
-	hw_desc->crc_addr = 0;
-}
-
-/* to do: support buffers larger than ADMA_MAX_BYTE_COUNT */
-static inline void
-iop_desc_init_xor(struct iop_adma_desc_slot *desc, int src_cnt,
-		  unsigned long flags)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	union {
-		u32 value;
-		struct iop13xx_adma_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = 0;
-	u_desc_ctrl.field.src_select = src_cnt - 1;
-	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
-	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-	hw_desc->desc_ctrl = u_desc_ctrl.value;
-	hw_desc->crc_addr = 0;
-
-}
-#define iop_desc_init_null_xor(d, s, i) iop_desc_init_xor(d, s, i)
-
-/* to do: support buffers larger than ADMA_MAX_BYTE_COUNT */
-static inline int
-iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
-		       unsigned long flags)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	union {
-		u32 value;
-		struct iop13xx_adma_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = 0;
-	u_desc_ctrl.field.src_select = src_cnt - 1;
-	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
-	u_desc_ctrl.field.zero_result = 1;
-	u_desc_ctrl.field.status_write_back_en = 1;
-	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-	hw_desc->desc_ctrl = u_desc_ctrl.value;
-	hw_desc->crc_addr = 0;
-
-	return 1;
-}
-
-static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan,
-					u32 byte_count)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	hw_desc->byte_count = byte_count;
-}
-
-static inline void
-iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
-{
-	int slots_per_op = desc->slots_per_op;
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
-	int i = 0;
-
-	if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) {
-		hw_desc->byte_count = len;
-	} else {
-		do {
-			iter = iop_hw_desc_slot_idx(hw_desc, i);
-			iter->byte_count = IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
-			len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
-			i += slots_per_op;
-		} while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT);
-
-		if (len) {
-			iter = iop_hw_desc_slot_idx(hw_desc, i);
-			iter->byte_count = len;
-		}
-	}
-}
-
-
-static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan,
-					dma_addr_t addr)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	hw_desc->dest_addr = addr;
-	hw_desc->upper_dest_addr = 0;
-}
-
-static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc,
-					dma_addr_t addr)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	hw_desc->src[0].src_addr = addr;
-	hw_desc->src[0].upper_src_addr = 0;
-}
-
-static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc,
-					int src_idx, dma_addr_t addr)
-{
-	int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
-	int i = 0;
-
-	do {
-		iter = iop_hw_desc_slot_idx(hw_desc, i);
-		iter->src[src_idx].src_addr = addr;
-		iter->src[src_idx].upper_src_addr = 0;
-		slot_cnt -= slots_per_op;
-		if (slot_cnt) {
-			i += slots_per_op;
-			addr += IOP_ADMA_XOR_MAX_BYTE_COUNT;
-		}
-	} while (slot_cnt);
-}
-
-static inline void
-iop_desc_init_interrupt(struct iop_adma_desc_slot *desc,
-	struct iop_adma_chan *chan)
-{
-	iop_desc_init_memcpy(desc, 1);
-	iop_desc_set_byte_count(desc, chan, 0);
-	iop_desc_set_dest_addr(desc, chan, 0);
-	iop_desc_set_memcpy_src_addr(desc, 0);
-}
-
-#define iop_desc_set_zero_sum_src_addr iop_desc_set_xor_src_addr
-
-static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc,
-					u32 next_desc_addr)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	BUG_ON(hw_desc->next_desc);
-	hw_desc->next_desc = next_desc_addr;
-}
-
-static inline u32 iop_desc_get_next_desc(struct iop_adma_desc_slot *desc)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	return hw_desc->next_desc;
-}
-
-static inline void iop_desc_clear_next_desc(struct iop_adma_desc_slot *desc)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	hw_desc->next_desc = 0;
-}
-
-static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc,
-						u32 val)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	hw_desc->block_fill_data = val;
-}
-
-static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	struct iop13xx_adma_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
-	struct iop13xx_adma_byte_count byte_count = hw_desc->byte_count_field;
-
-	BUG_ON(!(byte_count.tx_complete && desc_ctrl.zero_result));
-
-	if (desc_ctrl.pq_xfer_en)
-		return byte_count.zero_result_err_q;
-	else
-		return byte_count.zero_result_err;
-}
-
-static inline void iop_chan_append(struct iop_adma_chan *chan)
-{
-	u32 adma_accr;
-
-	adma_accr = __raw_readl(ADMA_ACCR(chan));
-	adma_accr |= 0x2;
-	__raw_writel(adma_accr, ADMA_ACCR(chan));
-}
-
-static inline u32 iop_chan_get_status(struct iop_adma_chan *chan)
-{
-	return __raw_readl(ADMA_ACSR(chan));
-}
-
-static inline void iop_chan_disable(struct iop_adma_chan *chan)
-{
-	u32 adma_chan_ctrl = __raw_readl(ADMA_ACCR(chan));
-	adma_chan_ctrl &= ~0x1;
-	__raw_writel(adma_chan_ctrl, ADMA_ACCR(chan));
-}
-
-static inline void iop_chan_enable(struct iop_adma_chan *chan)
-{
-	u32 adma_chan_ctrl;
-
-	adma_chan_ctrl = __raw_readl(ADMA_ACCR(chan));
-	adma_chan_ctrl |= 0x1;
-	__raw_writel(adma_chan_ctrl, ADMA_ACCR(chan));
-}
-
-static inline void iop_adma_device_clear_eot_status(struct iop_adma_chan *chan)
-{
-	u32 status = __raw_readl(ADMA_ACSR(chan));
-	status &= (1 << 12);
-	__raw_writel(status, ADMA_ACSR(chan));
-}
-
-static inline void iop_adma_device_clear_eoc_status(struct iop_adma_chan *chan)
-{
-	u32 status = __raw_readl(ADMA_ACSR(chan));
-	status &= (1 << 11);
-	__raw_writel(status, ADMA_ACSR(chan));
-}
-
-static inline void iop_adma_device_clear_err_status(struct iop_adma_chan *chan)
-{
-	u32 status = __raw_readl(ADMA_ACSR(chan));
-	status &= (1 << 9) | (1 << 5) | (1 << 4) | (1 << 3);
-	__raw_writel(status, ADMA_ACSR(chan));
-}
-
-static inline int
-iop_is_err_int_parity(unsigned long status, struct iop_adma_chan *chan)
-{
-	return test_bit(9, &status);
-}
-
-static inline int
-iop_is_err_mcu_abort(unsigned long status, struct iop_adma_chan *chan)
-{
-	return test_bit(5, &status);
-}
-
-static inline int
-iop_is_err_int_tabort(unsigned long status, struct iop_adma_chan *chan)
-{
-	return test_bit(4, &status);
-}
-
-static inline int
-iop_is_err_int_mabort(unsigned long status, struct iop_adma_chan *chan)
-{
-	return test_bit(3, &status);
-}
-
-static inline int
-iop_is_err_pci_tabort(unsigned long status, struct iop_adma_chan *chan)
-{
-	return 0;
-}
-
-static inline int
-iop_is_err_pci_mabort(unsigned long status, struct iop_adma_chan *chan)
-{
-	return 0;
-}
-
-static inline int
-iop_is_err_split_tx(unsigned long status, struct iop_adma_chan *chan)
-{
-	return 0;
-}
-
-#endif /* _ADMA_H */
diff --git a/include/asm-arm/arch-iop13xx/debug-macro.S b/include/asm-arm/arch-iop13xx/debug-macro.S
deleted file mode 100644
index 788b4e3..0000000
--- a/include/asm-arm/arch-iop13xx/debug-macro.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-iop13xx/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-	.macro	addruart, rx
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1			@ mmu enabled?
-	moveq	\rx, #0xff000000	@ physical
-	orreq	\rx, \rx, #0x00d80000
-	movne	\rx, #0xfe000000	@ virtual
-	orrne	\rx, \rx, #0x00e80000
-	orr	\rx, \rx, #0x00002300
-	orr	\rx, \rx, #0x00000040
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-iop13xx/memory.h b/include/asm-arm/arch-iop13xx/memory.h
deleted file mode 100644
index 031a0fa..0000000
--- a/include/asm-arm/arch-iop13xx/memory.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/arch/hardware.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x00000000)
-#define TASK_SIZE  	UL(0x3f000000)
-#define PAGE_OFFSET	UL(0x40000000)
-#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
-
-#ifndef __ASSEMBLY__
-
-#if defined(CONFIG_ARCH_IOP13XX)
-#define IOP13XX_PMMR_V_START (IOP13XX_PMMR_VIRT_MEM_BASE)
-#define IOP13XX_PMMR_V_END   (IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_SIZE)
-#define IOP13XX_PMMR_P_START (IOP13XX_PMMR_PHYS_MEM_BASE)
-#define IOP13XX_PMMR_P_END   (IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_SIZE)
-
-/*
- * Virtual view <-> PCI DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-
-/* RAM has 1:1 mapping on the PCIe/x Busses */
-#define __virt_to_bus(x)	(__virt_to_phys(x))
-#define __bus_to_virt(x)    (__phys_to_virt(x))
-
-#define virt_to_lbus(x) 					   \
-(( ((void*)(x) >= (void*)IOP13XX_PMMR_V_START) &&		   \
-((void*)(x) < (void*)IOP13XX_PMMR_V_END) ) ? 			   \
-((x) - IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_PHYS_MEM_BASE) : \
-((x) - PAGE_OFFSET + PHYS_OFFSET))
-
-#define lbus_to_virt(x)                                            \
-(( ((x) >= IOP13XX_PMMR_P_START) && ((x) < IOP13XX_PMMR_P_END) ) ? \
-((x) - IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_VIRT_MEM_BASE ) : \
-((x) - PHYS_OFFSET + PAGE_OFFSET))
-
-/* Device is an lbus device if it is on the platform bus of the IOP13XX */
-#define is_lbus_device(dev) (dev &&\
-			     (strncmp(dev->bus->name, "platform", 8) == 0))
-
-#define __arch_page_to_dma(dev, page)					\
-({is_lbus_device(dev) ? (dma_addr_t)virt_to_lbus(page_address(page)) : \
-(dma_addr_t)__virt_to_bus(page_address(page));})
-
-#define __arch_dma_to_virt(dev, addr) \
-({is_lbus_device(dev) ? lbus_to_virt(addr) : __bus_to_virt(addr);})
-
-#define __arch_virt_to_dma(dev, addr) \
-({is_lbus_device(dev) ? virt_to_lbus(addr) : __virt_to_bus(addr);})
-
-#endif /* CONFIG_ARCH_IOP13XX */
-#endif /* !ASSEMBLY */
-
-#define PFN_TO_NID(addr)	(0)
-
-#endif
diff --git a/include/asm-arm/arch-iop13xx/pci.h b/include/asm-arm/arch-iop13xx/pci.h
deleted file mode 100644
index 4041f30..0000000
--- a/include/asm-arm/arch-iop13xx/pci.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef _IOP13XX_PCI_H_
-#define _IOP13XX_PCI_H_
-#include <asm/arch/irqs.h>
-#include <asm/io.h>
-
-struct pci_sys_data;
-struct hw_pci;
-int iop13xx_pci_setup(int nr, struct pci_sys_data *sys);
-struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
-void iop13xx_atu_select(struct hw_pci *plat_pci);
-void iop13xx_pci_init(void);
-void iop13xx_map_pci_memory(void);
-
-#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY |	     \
-			       PCI_STATUS_SIG_TARGET_ABORT | \
-			       PCI_STATUS_REC_TARGET_ABORT | \
-			       PCI_STATUS_REC_TARGET_ABORT | \
-			       PCI_STATUS_REC_MASTER_ABORT | \
-			       PCI_STATUS_SIG_SYSTEM_ERROR | \
-	 		       PCI_STATUS_DETECTED_PARITY)
-
-#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR |  \
-				    IOP13XX_ATUE_STAT_ROOT_SYS_ERR |   \
-				    IOP13XX_ATUE_STAT_PCI_IFACE_ERR |  \
-				    IOP13XX_ATUE_STAT_ERR_COR |	       \
-				    IOP13XX_ATUE_STAT_ERR_UNCOR |      \
-				    IOP13XX_ATUE_STAT_CRS |	       \
-				    IOP13XX_ATUE_STAT_DET_PAR_ERR |    \
-				    IOP13XX_ATUE_STAT_EXT_REC_MABORT | \
-				    IOP13XX_ATUE_STAT_SIG_TABORT |     \
-				    IOP13XX_ATUE_STAT_EXT_REC_TABORT | \
-				    IOP13XX_ATUE_STAT_MASTER_DATA_PAR)
-
-#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM |        \
-				    IOP13XX_ATUX_STAT_REC_SCEM |       \
-				    IOP13XX_ATUX_STAT_TX_SERR |	       \
-				    IOP13XX_ATUX_STAT_DET_PAR_ERR |    \
-				    IOP13XX_ATUX_STAT_INT_REC_MABORT | \
-				    IOP13XX_ATUX_STAT_REC_SERR |       \
-				    IOP13XX_ATUX_STAT_EXT_REC_MABORT | \
-				    IOP13XX_ATUX_STAT_EXT_REC_TABORT | \
-				    IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \
-				    IOP13XX_ATUX_STAT_MASTER_DATA_PAR)
-
-/* PCI interrupts
- */
-#define ATUX_INTA IRQ_IOP13XX_XINT0
-#define ATUX_INTB IRQ_IOP13XX_XINT1
-#define ATUX_INTC IRQ_IOP13XX_XINT2
-#define ATUX_INTD IRQ_IOP13XX_XINT3
-
-#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA
-#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB
-#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC
-#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD
-
-#endif /* _IOP13XX_PCI_H_ */
diff --git a/include/asm-arm/arch-iop13xx/system.h b/include/asm-arm/arch-iop13xx/system.h
deleted file mode 100644
index 8575af8..0000000
--- a/include/asm-arm/arch-iop13xx/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * linux/include/asm-arm/arch-iop13xx/system.h
- *
- *  Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/arch/iop13xx.h>
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	/*
-	 * Reset the internal bus (warning both cores are reset)
-	 */
-	write_wdtcr(IOP_WDTCR_EN_ARM);
-	write_wdtcr(IOP_WDTCR_EN);
-	write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET);
-	write_wdtcr(0x1000);
-
-	for(;;);
-}
diff --git a/include/asm-arm/arch-iop13xx/timex.h b/include/asm-arm/arch-iop13xx/timex.h
deleted file mode 100644
index 47564ec..0000000
--- a/include/asm-arm/arch-iop13xx/timex.h
+++ /dev/null
@@ -1,3 +0,0 @@
-#include <asm/arch/hardware.h>
-
-#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/include/asm-arm/arch-iop13xx/uncompress.h b/include/asm-arm/arch-iop13xx/uncompress.h
deleted file mode 100644
index 5d4418d..0000000
--- a/include/asm-arm/arch-iop13xx/uncompress.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <asm/types.h>
-#include <linux/serial_reg.h>
-#include <asm/arch/hardware.h>
-
-#define UART_BASE ((volatile u32 *)IOP13XX_UART1_PHYS)
-#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
-
-static inline void putc(char c)
-{
-	while ((UART_BASE[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-	UART_BASE[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-iop32x/debug-macro.S b/include/asm-arm/arch-iop32x/debug-macro.S
deleted file mode 100644
index 9022b684..0000000
--- a/include/asm-arm/arch-iop32x/debug-macro.S
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-		.macro	addruart, rx
-		mov	\rx, #0xfe000000	@ physical as well as virtual
-		orr	\rx, \rx, #0x00800000	@ location of the UART
-		.endm
-
-#define UART_SHIFT	0
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-iop32x/dma.h b/include/asm-arm/arch-iop32x/dma.h
deleted file mode 100644
index e977a9e..0000000
--- a/include/asm-arm/arch-iop32x/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/dma.h
- *
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
diff --git a/include/asm-arm/arch-iop32x/entry-macro.S b/include/asm-arm/arch-iop32x/entry-macro.S
deleted file mode 100644
index 207db99..0000000
--- a/include/asm-arm/arch-iop32x/entry-macro.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/entry-macro.S
- *
- * Low-level IRQ helper macros for IOP32x-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/iop32x.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro get_irqnr_preamble, base, tmp
-	mrc	p15, 0, \tmp, c15, c1, 0
-	orr	\tmp, \tmp, #(1 << 6)
-	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
-	mrc	p15, 0, \tmp, c15, c1, 0
-	mov	\tmp, \tmp
-	sub	pc, pc, #4			@ cp_wait
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	mrc     p6, 0, \irqstat, c8, c0, 0	@ Read IINTSRC
-	cmp     \irqstat, #0
-	clzne   \irqnr, \irqstat
-	rsbne   \irqnr, \irqnr, #31
-	.endm
-
-	.macro arch_ret_to_user, tmp1, tmp2
-	mrc	p15, 0, \tmp1, c15, c1, 0
-	ands	\tmp2, \tmp1, #(1 << 6)
-	bicne	\tmp1, \tmp1, #(1 << 6)
-	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
-	.endm
diff --git a/include/asm-arm/arch-iop32x/glantank.h b/include/asm-arm/arch-iop32x/glantank.h
deleted file mode 100644
index bf0665a..0000000
--- a/include/asm-arm/arch-iop32x/glantank.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/glantank.h
- *
- * IO-Data GLAN Tank board registers
- */
-
-#ifndef __GLANTANK_H
-#define __GLANTANK_H
-
-#define GLANTANK_UART		0xfe800000	/* UART */
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/hardware.h b/include/asm-arm/arch-iop32x/hardware.h
deleted file mode 100644
index 6556ed5..0000000
--- a/include/asm-arm/arch-iop32x/hardware.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/hardware.h
- */
-
-#ifndef __HARDWARE_H
-#define __HARDWARE_H
-
-#include <asm/types.h>
-
-/*
- * Note about PCI IO space mappings
- *
- * To make IO space accesses efficient, we store virtual addresses in
- * the IO resources.
- *
- * The PCI IO space is located at virtual 0xfe000000 from physical
- * 0x90000000. The PCI BARs must be programmed with physical addresses,
- * but when we read them, we convert them to virtual addresses. See
- * arch/arm/plat-iop/pci.c.
- */
-#define pcibios_assign_all_busses() 1
-#define PCIBIOS_MIN_IO		0x00000000
-#define PCIBIOS_MIN_MEM		0x00000000
-
-#ifndef __ASSEMBLY__
-void iop32x_init_irq(void);
-#endif
-
-
-/*
- * Generic chipset bits
- */
-#include "iop32x.h"
-
-/*
- * Board specific bits
- */
-#include "glantank.h"
-#include "iq80321.h"
-#include "iq31244.h"
-#include "n2100.h"
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/io.h b/include/asm-arm/arch-iop32x/io.h
deleted file mode 100644
index 47b2736..0000000
--- a/include/asm-arm/arch-iop32x/io.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/io.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IO_H
-#define __IO_H
-
-#include <asm/arch/hardware.h>
-
-extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
-	unsigned int mtype);
-extern void __iop3xx_iounmap(void __iomem *addr);
-
-#define IO_SPACE_LIMIT		0xffffffff
-#define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
-#define __mem_pci(a)		(a)
-
-#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
-#define __arch_iounmap(a)	 __iop3xx_iounmap(a)
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/iop32x.h b/include/asm-arm/arch-iop32x/iop32x.h
deleted file mode 100644
index 0d8af57..0000000
--- a/include/asm-arm/arch-iop32x/iop32x.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/iop32x.h
- *
- * Intel IOP32X Chip definitions
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IOP32X_H
-#define __IOP32X_H
-
-/*
- * Peripherals that are shared between the iop32x and iop33x but
- * located at different addresses.
- */
-#define IOP3XX_GPIO_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c4 + (reg))
-#define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
-
-#include <asm/hardware/iop3xx.h>
-
-/* ATU Parameters
- * set up a 1:1 bus to physical ram relationship
- * w/ physical ram on top of pci in the memory map
- */
-#define IOP32X_MAX_RAM_SIZE            0x40000000UL
-#define IOP3XX_MAX_RAM_SIZE            IOP32X_MAX_RAM_SIZE
-#define IOP3XX_PCI_LOWER_MEM_BA        0x80000000
-#define IOP32X_PCI_MEM_WINDOW_SIZE     0x04000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE     IOP32X_PCI_MEM_WINDOW_SIZE
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/iq31244.h b/include/asm-arm/arch-iop32x/iq31244.h
deleted file mode 100644
index fff4eaf..0000000
--- a/include/asm-arm/arch-iop32x/iq31244.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/iq31244.h
- *
- * Intel IQ31244 evaluation board registers
- */
-
-#ifndef __IQ31244_H
-#define __IQ31244_H
-
-#define IQ31244_UART		0xfe800000	/* UART #1 */
-#define IQ31244_7SEG_1		0xfe840000	/* 7-Segment MSB */
-#define IQ31244_7SEG_0		0xfe850000	/* 7-Segment LSB (WO) */
-#define IQ31244_ROTARY_SW	0xfe8d0000	/* Rotary Switch */
-#define IQ31244_BATT_STAT	0xfe8f0000	/* Battery Status */
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/iq80321.h b/include/asm-arm/arch-iop32x/iq80321.h
deleted file mode 100644
index eb69db9..0000000
--- a/include/asm-arm/arch-iop32x/iq80321.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/iq80321.h
- *
- * Intel IQ80321 evaluation board registers
- */
-
-#ifndef __IQ80321_H
-#define __IQ80321_H
-
-#define IQ80321_UART		0xfe800000	/* UART #1 */
-#define IQ80321_7SEG_1		0xfe840000	/* 7-Segment MSB */
-#define IQ80321_7SEG_0		0xfe850000	/* 7-Segment LSB (WO) */
-#define IQ80321_ROTARY_SW	0xfe8d0000	/* Rotary Switch */
-#define IQ80321_BATT_STAT	0xfe8f0000	/* Battery Status */
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/irqs.h b/include/asm-arm/arch-iop32x/irqs.h
deleted file mode 100644
index bbaef87..0000000
--- a/include/asm-arm/arch-iop32x/irqs.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/irqs.h
- *
- * Author:	Rory Bolt <rorybolt@pacbell.net>
- * Copyright:	(C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IRQS_H
-#define __IRQS_H
-
-/*
- * IOP80321 chipset interrupts
- */
-#define IRQ_IOP32X_DMA0_EOT	0
-#define IRQ_IOP32X_DMA0_EOC	1
-#define IRQ_IOP32X_DMA1_EOT	2
-#define IRQ_IOP32X_DMA1_EOC	3
-#define IRQ_IOP32X_AA_EOT	6
-#define IRQ_IOP32X_AA_EOC	7
-#define IRQ_IOP32X_CORE_PMON	8
-#define IRQ_IOP32X_TIMER0	9
-#define IRQ_IOP32X_TIMER1	10
-#define IRQ_IOP32X_I2C_0	11
-#define IRQ_IOP32X_I2C_1	12
-#define IRQ_IOP32X_MESSAGING	13
-#define IRQ_IOP32X_ATU_BIST	14
-#define IRQ_IOP32X_PERFMON	15
-#define IRQ_IOP32X_CORE_PMU	16
-#define IRQ_IOP32X_BIU_ERR	17
-#define IRQ_IOP32X_ATU_ERR	18
-#define IRQ_IOP32X_MCU_ERR	19
-#define IRQ_IOP32X_DMA0_ERR	20
-#define IRQ_IOP32X_DMA1_ERR	21
-#define IRQ_IOP32X_AA_ERR	23
-#define IRQ_IOP32X_MSG_ERR	24
-#define IRQ_IOP32X_SSP		25
-#define IRQ_IOP32X_XINT0	27
-#define IRQ_IOP32X_XINT1	28
-#define IRQ_IOP32X_XINT2	29
-#define IRQ_IOP32X_XINT3	30
-#define IRQ_IOP32X_HPI		31
-
-#define NR_IRQS			32
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/memory.h b/include/asm-arm/arch-iop32x/memory.h
deleted file mode 100644
index bdcf038..0000000
--- a/include/asm-arm/arch-iop32x/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/memory.h
- */
-
-#ifndef __MEMORY_H
-#define __MEMORY_H
-
-#include <asm/arch/hardware.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0xa0000000)
-
-/*
- * Virtual view <-> PCI DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	(__virt_to_phys(x))
-#define __bus_to_virt(x)	(__phys_to_virt(x))
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/n2100.h b/include/asm-arm/arch-iop32x/n2100.h
deleted file mode 100644
index 77a8af4..0000000
--- a/include/asm-arm/arch-iop32x/n2100.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/n2100.h
- *
- * Thecus N2100 board registers
- */
-
-#ifndef __N2100_H
-#define __N2100_H
-
-#define N2100_UART		0xfe800000	/* UART */
-
-#define N2100_COPY_BUTTON	IOP3XX_GPIO_LINE(0)
-#define N2100_PCA9532_RESET	IOP3XX_GPIO_LINE(2)
-#define N2100_RESET_BUTTON	IOP3XX_GPIO_LINE(3)
-#define N2100_HARDWARE_RESET	IOP3XX_GPIO_LINE(4)
-#define N2100_POWER_BUTTON	IOP3XX_GPIO_LINE(5)
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/system.h b/include/asm-arm/arch-iop32x/system.h
deleted file mode 100644
index 17b7eb7..0000000
--- a/include/asm-arm/arch-iop32x/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/mach-types.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	local_irq_disable();
-
-	if (machine_is_n2100()) {
-		gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
-		gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);
-		while (1)
-			;
-	}
-
-	*IOP3XX_PCSR = 0x30;
-
-	/* Jump into ROM at address 0 */
-	cpu_reset(0);
-}
diff --git a/include/asm-arm/arch-iop32x/timex.h b/include/asm-arm/arch-iop32x/timex.h
deleted file mode 100644
index 4457046..0000000
--- a/include/asm-arm/arch-iop32x/timex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/timex.h
- *
- * IOP32x architecture timex specifications
- */
-
-#include <asm/arch/hardware.h>
-
-#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/include/asm-arm/arch-iop32x/uncompress.h b/include/asm-arm/arch-iop32x/uncompress.h
deleted file mode 100644
index 0702878..0000000
--- a/include/asm-arm/arch-iop32x/uncompress.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/uncompress.h
- */
-
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-#include <asm/arch/hardware.h>
-
-static volatile u8 *uart_base;
-
-#define TX_DONE		(UART_LSR_TEMT | UART_LSR_THRE)
-
-static inline void putc(char c)
-{
-	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-	uart_base[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
-	if (machine_is_iq80321())
-		uart_base = (volatile u8 *)IQ80321_UART;
-	else if (machine_is_iq31244() || machine_is_em7210())
-		uart_base = (volatile u8 *)IQ31244_UART;
-	else
-		uart_base = (volatile u8 *)0xfe800000;
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-iop32x/vmalloc.h b/include/asm-arm/arch-iop32x/vmalloc.h
deleted file mode 100644
index 0a70baa..0000000
--- a/include/asm-arm/arch-iop32x/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe000000
diff --git a/include/asm-arm/arch-iop33x/debug-macro.S b/include/asm-arm/arch-iop33x/debug-macro.S
deleted file mode 100644
index 9e7132e..0000000
--- a/include/asm-arm/arch-iop33x/debug-macro.S
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-		.macro	addruart, rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ mmu enabled?
-		moveq	\rx, #0xff000000	@ physical
-		movne	\rx, #0xfe000000	@ virtual
-		orr	\rx, \rx, #0x00ff0000
-		orr	\rx, \rx, #0x0000f700
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-iop33x/dma.h b/include/asm-arm/arch-iop33x/dma.h
deleted file mode 100644
index b7775fd..0000000
--- a/include/asm-arm/arch-iop33x/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/dma.h
- *
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
diff --git a/include/asm-arm/arch-iop33x/entry-macro.S b/include/asm-arm/arch-iop33x/entry-macro.S
deleted file mode 100644
index b8e3d44..0000000
--- a/include/asm-arm/arch-iop33x/entry-macro.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/entry-macro.S
- *
- * Low-level IRQ helper macros for IOP33x-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/iop33x.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro get_irqnr_preamble, base, tmp
-	mrc	p15, 0, \tmp, c15, c1, 0
-	orr	\tmp, \tmp, #(1 << 6)
-	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
-	mrc	p15, 0, \tmp, c15, c1, 0
-	mov	\tmp, \tmp
-	sub	pc, pc, #4			@ cp_wait
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	mrc     p6, 0, \irqstat, c14, c0, 0     @ Read IINTVEC
-	cmp     \irqstat, #0
-	mrceq   p6, 0, \irqstat, c14, c0, 0     @ erratum 63 workaround
-	adds    \irqnr, \irqstat, #1
-	movne   \irqnr, \irqstat, lsr #2
-	.endm
-
-	.macro arch_ret_to_user, tmp1, tmp2
-	mrc	p15, 0, \tmp1, c15, c1, 0
-	ands	\tmp2, \tmp1, #(1 << 6)
-	bicne	\tmp1, \tmp1, #(1 << 6)
-	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
-	.endm
diff --git a/include/asm-arm/arch-iop33x/hardware.h b/include/asm-arm/arch-iop33x/hardware.h
deleted file mode 100644
index 0659cf94..0000000
--- a/include/asm-arm/arch-iop33x/hardware.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/hardware.h
- */
-
-#ifndef __HARDWARE_H
-#define __HARDWARE_H
-
-#include <asm/types.h>
-
-/*
- * Note about PCI IO space mappings
- *
- * To make IO space accesses efficient, we store virtual addresses in
- * the IO resources.
- *
- * The PCI IO space is located at virtual 0xfe000000 from physical
- * 0x90000000.  The PCI BARs must be programmed with physical addresses,
- * but when we read them, we convert them to virtual addresses.  See
- * arch/arm/mach-iop3xx/iop3xx-pci.c
- */
-#define pcibios_assign_all_busses()	1
-#define PCIBIOS_MIN_IO		0x00000000
-#define PCIBIOS_MIN_MEM		0x00000000
-
-#ifndef __ASSEMBLY__
-void iop33x_init_irq(void);
-
-extern struct platform_device iop33x_uart0_device;
-extern struct platform_device iop33x_uart1_device;
-#endif
-
-
-/*
- * Generic chipset bits
- *
- */
-#include "iop33x.h"
-
-/*
- * Board specific bits
- */
-#include "iq80331.h"
-#include "iq80332.h"
-
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/io.h b/include/asm-arm/arch-iop33x/io.h
deleted file mode 100644
index 3fc607c..0000000
--- a/include/asm-arm/arch-iop33x/io.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/io.h
- *
- * Copyright (C) 2001  MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IO_H
-#define __IO_H
-
-#include <asm/arch/hardware.h>
-
-extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
-	unsigned int mtype);
-extern void __iop3xx_iounmap(void __iomem *addr);
-
-#define IO_SPACE_LIMIT		0xffffffff
-#define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
-#define __mem_pci(a)		(a)
-
-#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
-#define __arch_iounmap(a)	 __iop3xx_iounmap(a)
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/iop33x.h b/include/asm-arm/arch-iop33x/iop33x.h
deleted file mode 100644
index 766985b..0000000
--- a/include/asm-arm/arch-iop33x/iop33x.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/iop33x.h
- *
- * Intel IOP33X Chip definitions
- *
- * Author: Dave Jiang (dave.jiang@intel.com)
- * Copyright (C) 2003, 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IOP33X_H
-#define __IOP33X_H
-
-/*
- * Peripherals that are shared between the iop32x and iop33x but
- * located at different addresses.
- */
-#define IOP3XX_GPIO_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780 + (reg))
-#define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg))
-
-#include <asm/hardware/iop3xx.h>
-
-/* UARTs  */
-#define IOP33X_UART0_PHYS	(IOP3XX_PERIPHERAL_PHYS_BASE + 0x1700)
-#define IOP33X_UART0_VIRT	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1700)
-#define IOP33X_UART1_PHYS	(IOP3XX_PERIPHERAL_PHYS_BASE + 0x1740)
-#define IOP33X_UART1_VIRT	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1740)
-
-/* ATU Parameters
- * set up a 1:1 bus to physical ram relationship
- * w/ pci on top of physical ram in memory map
- */
-#define IOP33X_MAX_RAM_SIZE		0x80000000UL
-#define IOP3XX_MAX_RAM_SIZE		IOP33X_MAX_RAM_SIZE
-#define IOP3XX_PCI_LOWER_MEM_BA	(PHYS_OFFSET + IOP33X_MAX_RAM_SIZE)
-#define IOP33X_PCI_MEM_WINDOW_SIZE	0x08000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE	IOP33X_PCI_MEM_WINDOW_SIZE
-
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/iq80331.h b/include/asm-arm/arch-iop33x/iq80331.h
deleted file mode 100644
index 79b9302..0000000
--- a/include/asm-arm/arch-iop33x/iq80331.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/iq80331.h
- *
- * Intel IQ80331 evaluation board registers
- */
-
-#ifndef __IQ80331_H
-#define __IQ80331_H
-
-#define IQ80331_7SEG_1		0xce840000	/* 7-Segment MSB */
-#define IQ80331_7SEG_0		0xce850000	/* 7-Segment LSB (WO) */
-#define IQ80331_ROTARY_SW	0xce8d0000	/* Rotary Switch */
-#define IQ80331_BATT_STAT	0xce8f0000	/* Battery Status */
-
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/iq80332.h b/include/asm-arm/arch-iop33x/iq80332.h
deleted file mode 100644
index 0531656..0000000
--- a/include/asm-arm/arch-iop33x/iq80332.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/iq80332.h
- *
- * Intel IQ80332 evaluation board registers
- */
-
-#ifndef __IQ80332_H
-#define __IQ80332_H
-
-#define IQ80332_7SEG_1		0xce840000	/* 7-Segment MSB */
-#define IQ80332_7SEG_0		0xce850000	/* 7-Segment LSB (WO) */
-#define IQ80332_ROTARY_SW	0xce8d0000	/* Rotary Switch */
-#define IQ80332_BATT_STAT	0xce8f0000	/* Battery Status */
-
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/irqs.h b/include/asm-arm/arch-iop33x/irqs.h
deleted file mode 100644
index d045f84..0000000
--- a/include/asm-arm/arch-iop33x/irqs.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/irqs.h
- *
- * Author:	Dave Jiang (dave.jiang@intel.com)
- * Copyright:	(C) 2003 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IRQS_H
-#define __IRQS_H
-
-/*
- * IOP80331 chipset interrupts
- */
-#define IRQ_IOP33X_DMA0_EOT	0
-#define IRQ_IOP33X_DMA0_EOC	1
-#define IRQ_IOP33X_DMA1_EOT	2
-#define IRQ_IOP33X_DMA1_EOC	3
-#define IRQ_IOP33X_AA_EOT	6
-#define IRQ_IOP33X_AA_EOC	7
-#define IRQ_IOP33X_TIMER0	8
-#define IRQ_IOP33X_TIMER1	9
-#define IRQ_IOP33X_I2C_0	10
-#define IRQ_IOP33X_I2C_1	11
-#define IRQ_IOP33X_MSG		12
-#define IRQ_IOP33X_MSGIBQ	13
-#define IRQ_IOP33X_ATU_BIST	14
-#define IRQ_IOP33X_PERFMON	15
-#define IRQ_IOP33X_CORE_PMU	16
-#define IRQ_IOP33X_XINT0	24
-#define IRQ_IOP33X_XINT1	25
-#define IRQ_IOP33X_XINT2	26
-#define IRQ_IOP33X_XINT3	27
-#define IRQ_IOP33X_XINT8	32
-#define IRQ_IOP33X_XINT9	33
-#define IRQ_IOP33X_XINT10	34
-#define IRQ_IOP33X_XINT11	35
-#define IRQ_IOP33X_XINT12	36
-#define IRQ_IOP33X_XINT13	37
-#define IRQ_IOP33X_XINT14	38
-#define IRQ_IOP33X_XINT15	39
-#define IRQ_IOP33X_UART0	51
-#define IRQ_IOP33X_UART1	52
-#define IRQ_IOP33X_PBIE		53
-#define IRQ_IOP33X_ATU_CRW	54
-#define IRQ_IOP33X_ATU_ERR	55
-#define IRQ_IOP33X_MCU_ERR	56
-#define IRQ_IOP33X_DMA0_ERR	57
-#define IRQ_IOP33X_DMA1_ERR	58
-#define IRQ_IOP33X_AA_ERR	60
-#define IRQ_IOP33X_MSG_ERR	62
-#define IRQ_IOP33X_HPI		63
-
-#define NR_IRQS			64
-
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/memory.h b/include/asm-arm/arch-iop33x/memory.h
deleted file mode 100644
index d798d83..0000000
--- a/include/asm-arm/arch-iop33x/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/memory.h
- */
-
-#ifndef __MEMORY_H
-#define __MEMORY_H
-
-#include <asm/arch/hardware.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x00000000)
-
-/*
- * Virtual view <-> PCI DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	(__virt_to_phys(x))
-#define __bus_to_virt(x)	(__phys_to_virt(x))
-
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/system.h b/include/asm-arm/arch-iop33x/system.h
deleted file mode 100644
index 00dd07e..0000000
--- a/include/asm-arm/arch-iop33x/system.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	*IOP3XX_PCSR = 0x30;
-
-	/* Jump into ROM at address 0 */
-	cpu_reset(0);
-}
diff --git a/include/asm-arm/arch-iop33x/timex.h b/include/asm-arm/arch-iop33x/timex.h
deleted file mode 100644
index 75a001e..0000000
--- a/include/asm-arm/arch-iop33x/timex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/timex.h
- *
- * IOP3xx architecture timex specifications
- */
-
-#include <asm/arch/hardware.h>
-
-#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/include/asm-arm/arch-iop33x/uncompress.h b/include/asm-arm/arch-iop33x/uncompress.h
deleted file mode 100644
index 34d9e8e..0000000
--- a/include/asm-arm/arch-iop33x/uncompress.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/uncompress.h
- */
-
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-#include <asm/arch/hardware.h>
-
-static volatile u32 *uart_base;
-
-#define TX_DONE		(UART_LSR_TEMT | UART_LSR_THRE)
-
-static inline void putc(char c)
-{
-	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-	uart_base[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
-	if (machine_is_iq80331() || machine_is_iq80332())
-		uart_base = (volatile u32 *)IOP33X_UART0_PHYS;
-	else
-		uart_base = (volatile u32 *)0xfe800000;
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-iop33x/vmalloc.h b/include/asm-arm/arch-iop33x/vmalloc.h
deleted file mode 100644
index 66f545a7..0000000
--- a/include/asm-arm/arch-iop33x/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe000000
diff --git a/include/asm-arm/arch-ixp2000/debug-macro.S b/include/asm-arm/arch-ixp2000/debug-macro.S
deleted file mode 100644
index bc8b396..0000000
--- a/include/asm-arm/arch-ixp2000/debug-macro.S
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/include/asm-arm/arch-ixp2000/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro  addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0xc0000000	@ Physical base
-		movne	\rx, #0xfe000000	@ virtual base
-		orrne	\rx, \rx, #0x00f00000
-		orr	\rx, \rx, #0x00030000
-#ifdef	__ARMEB__
-		orr	\rx, \rx, #0x00000003
-#endif
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ixp2000/dma.h b/include/asm-arm/arch-ixp2000/dma.h
deleted file mode 100644
index 548d8dc..0000000
--- a/include/asm-arm/arch-ixp2000/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/dma.h
- *
- * Copyright (C) 2002 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
diff --git a/include/asm-arm/arch-ixp2000/enp2611.h b/include/asm-arm/arch-ixp2000/enp2611.h
deleted file mode 100644
index 42f3c28..0000000
--- a/include/asm-arm/arch-ixp2000/enp2611.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/enp2611.h
- *
- * Register and other defines for Radisys ENP-2611
- *
- * Created 2004 by Lennert Buytenhek from the ixdp2x01 code.  The
- * original version carries the following notices:
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __ENP2611_H
-#define __ENP2611_H
-
-#define ENP2611_CALEB_PHYS_BASE		0xc5000000
-#define ENP2611_CALEB_VIRT_BASE		0xfe000000
-#define ENP2611_CALEB_SIZE		0x00100000
-
-#define ENP2611_PM3386_0_PHYS_BASE	0xc6000000
-#define ENP2611_PM3386_0_VIRT_BASE	0xfe100000
-#define ENP2611_PM3386_0_SIZE		0x00100000
-
-#define ENP2611_PM3386_1_PHYS_BASE	0xc6400000
-#define ENP2611_PM3386_1_VIRT_BASE	0xfe200000
-#define ENP2611_PM3386_1_SIZE		0x00100000
-
-#define ENP2611_GPIO_SCL		7
-#define ENP2611_GPIO_SDA		6
-
-#define IRQ_ENP2611_THERMAL		IRQ_IXP2000_GPIO4
-#define IRQ_ENP2611_OPTION_BOARD	IRQ_IXP2000_GPIO3
-#define IRQ_ENP2611_CALEB		IRQ_IXP2000_GPIO2
-#define IRQ_ENP2611_PM3386_1		IRQ_IXP2000_GPIO1
-#define IRQ_ENP2611_PM3386_0		IRQ_IXP2000_GPIO0
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp2000/entry-macro.S b/include/asm-arm/arch-ixp2000/entry-macro.S
deleted file mode 100644
index 11d512a..0000000
--- a/include/asm-arm/arch-ixp2000/entry-macro.S
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/entry-macro.S
- *
- * Low-level IRQ helper macros for IXP2000-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/irqs.h>
-
-		.macro  disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		mov	\irqnr, #0x0              @clear out irqnr as default
-                mov	\base, #0xfe000000
-		orr	\base, \base, #0x00e00000
-		orr	\base, \base, #0x08
-		ldr	\irqstat, [\base]         @ get interrupts
-
-		cmp	\irqstat, #0
-		beq	1001f
-
-		clz     \irqnr, \irqstat
-		mov     \base, #31
-		subs    \irqnr, \base, \irqnr
-
-		/*
-		 * We handle PCIA and PCIB here so we don't have an
-		 * extra layer of code just to check these two bits.
-		 */
-		cmp	\irqnr, #IRQ_IXP2000_PCI
-		bne	1001f
-
-		mov	\base, #0xfe000000
-		orr	\base, \base, #0x00c00000
-		orr	\base, \base, #0x00000100
-		orr	\base, \base, #0x00000058
-		ldr	\irqstat, [\base]
-
-		mov	\tmp, #(1<<26)
-		tst	\irqstat, \tmp
-		movne	\irqnr, #IRQ_IXP2000_PCIA
-		bne	1001f
-
-		mov	\tmp, #(1<<27)
-		tst	\irqstat, \tmp
-		movne	\irqnr, #IRQ_IXP2000_PCIB
-
-1001:
-		.endm
-
diff --git a/include/asm-arm/arch-ixp2000/gpio.h b/include/asm-arm/arch-ixp2000/gpio.h
deleted file mode 100644
index 03cbbe1..0000000
--- a/include/asm-arm/arch-ixp2000/gpio.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/gpio.h
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software, you can redistribute it and/or modify 
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * IXP2000 GPIO in/out, edge/level detection for IRQs:
- * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High
- * or both Falling-edge and Rising-edge.  
- * This must be called *before* the corresponding IRQ is registerd.
- * Use this instead of directly setting the GPIO registers.
- * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
- */
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#ifndef __ASSEMBLY__
-
-#define GPIO_IN				0
-#define GPIO_OUT			1
-
-#define IXP2000_GPIO_LOW		0
-#define IXP2000_GPIO_HIGH		1
-
-extern void gpio_line_config(int line, int direction);
-
-static inline int gpio_line_get(int line)
-{
-	return (((*IXP2000_GPIO_PLR) >> line) & 1);
-}
-
-static inline void gpio_line_set(int line, int value)
-{
-	if (value == IXP2000_GPIO_HIGH) {
-		ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line);
-	} else if (value == IXP2000_GPIO_LOW) {
-		ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line);
-	}
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* ASM_ARCH_IXP2000_GPIO_H_ */
diff --git a/include/asm-arm/arch-ixp2000/hardware.h b/include/asm-arm/arch-ixp2000/hardware.h
deleted file mode 100644
index e7ea781c..0000000
--- a/include/asm-arm/arch-ixp2000/hardware.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/hardware.h
- *
- * Hardware definitions for IXP2400/2800 based systems
- *
- * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
- *
- * Maintainer: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright (C) 2001-2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#define __ASM_ARCH_HARDWARE_H__
-
-/*
- * This needs to be platform-specific?
- */
-#define PCIBIOS_MIN_IO          0x00000000
-#define PCIBIOS_MIN_MEM         0x00000000
-
-#include "ixp2000-regs.h"	/* Chipset Registers */
-
-#define pcibios_assign_all_busses() 0
-
-/*
- * Platform helper functions
- */
-#include "platform.h"
-
-/*
- * Platform-specific bits
- */
-#include "enp2611.h"		/* ENP-2611 */
-#include "ixdp2x00.h"		/* IXDP2400/2800 */
-#include "ixdp2x01.h"		/* IXDP2401/2801 */
-
-#endif  /* _ASM_ARCH_HARDWARE_H__ */
diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h
deleted file mode 100644
index 5dc1d25..0000000
--- a/include/asm-arm/arch-ixp2000/io.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/io.h
- *
- * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002  Intel Corp.
- * Copyrgiht (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT		0xffffffff
-#define __mem_pci(a)		(a)
-
-/*
- * The A? revisions of the IXP2000s assert byte lanes for PCI I/O
- * transactions the other way round (MEM transactions don't have this
- * issue), so if we want to support those models, we need to override
- * the standard I/O functions.
- *
- * B0 and later have a bit that can be set to 1 to get the proper
- * behavior for I/O transactions, which then allows us to use the
- * standard I/O functions.  This is what we do if the user does not
- * explicitly ask for support for pre-B0.
- */
-#ifdef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
-#define ___io(p)		((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
-
-#define alignb(addr)		(void __iomem *)((unsigned long)(addr) ^ 3)
-#define alignw(addr)		(void __iomem *)((unsigned long)(addr) ^ 2)
-
-#define outb(v,p)		__raw_writeb((v),alignb(___io(p)))
-#define outw(v,p)		__raw_writew((v),alignw(___io(p)))
-#define outl(v,p)		__raw_writel((v),___io(p))
-
-#define inb(p)		({ unsigned int __v = __raw_readb(alignb(___io(p))); __v; })
-#define inw(p)		\
-	({ unsigned int __v = (__raw_readw(alignw(___io(p)))); __v; })
-#define inl(p)		\
-	({ unsigned int __v = (__raw_readl(___io(p))); __v; })
-
-#define outsb(p,d,l)		__raw_writesb(alignb(___io(p)),d,l)
-#define outsw(p,d,l)		__raw_writesw(alignw(___io(p)),d,l)
-#define outsl(p,d,l)		__raw_writesl(___io(p),d,l)
-
-#define insb(p,d,l)		__raw_readsb(alignb(___io(p)),d,l)
-#define insw(p,d,l)		__raw_readsw(alignw(___io(p)),d,l)
-#define insl(p,d,l)		__raw_readsl(___io(p),d,l)
-
-#define __is_io_address(p)	((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE)
-
-#define ioread8(p)						\
-	({							\
-		unsigned int __v;				\
-								\
-		if (__is_io_address(p)) {			\
-			__v = __raw_readb(alignb(p));		\
-		} else {					\
-			__v = __raw_readb(p);			\
-		}						\
-								\
-		__v;						\
-	})							\
-
-#define ioread16(p)						\
-	({							\
-		unsigned int __v;				\
-								\
-		if (__is_io_address(p)) {			\
-			__v = __raw_readw(alignw(p));		\
-		} else {					\
-			__v = le16_to_cpu(__raw_readw(p));	\
-		}						\
-								\
-		__v;						\
-	})
-
-#define ioread32(p)						\
-	({							\
-		unsigned int __v;				\
-								\
-		if (__is_io_address(p)) {			\
-			__v = __raw_readl(p);			\
-		} else {					\
-			__v = le32_to_cpu(__raw_readl(p));	\
-		}						\
-								\
-		 __v;						\
-	})
-
-#define iowrite8(v,p)						\
-	({							\
-		if (__is_io_address(p)) {			\
-			__raw_writeb((v), alignb(p));		\
-		} else {					\
-			__raw_writeb((v), p);			\
-		}						\
-	})
-
-#define iowrite16(v,p)						\
-	({							\
-		if (__is_io_address(p)) {			\
-			__raw_writew((v), alignw(p));		\
-		} else {					\
-			__raw_writew(cpu_to_le16(v), p);	\
-		}						\
-	})
-
-#define iowrite32(v,p)						\
-	({							\
-		if (__is_io_address(p)) {			\
-			__raw_writel((v), p);			\
-		} else {					\
-			__raw_writel(cpu_to_le32(v), p);	\
-		}						\
-	})
-
-#define ioport_map(port, nr)	___io(port)
-
-#define ioport_unmap(addr)
-#else
-#define __io(p)			((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
-#endif
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp2000/irqs.h b/include/asm-arm/arch-ixp2000/irqs.h
deleted file mode 100644
index 62f09c7..0000000
--- a/include/asm-arm/arch-ixp2000/irqs.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/irqs.h
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _IRQS_H
-#define _IRQS_H
-
-/*
- * Do NOT add #ifdef MACHINE_FOO in here.
- * Simpy add your machine IRQs here and increase NR_IRQS if needed to
- * hold your machine's IRQ table.
- */
-
-/*
- * Some interrupt numbers go unused b/c the IRQ mask/ummask/status
- * register has those bit reserved. We just mark those interrupts
- * as invalid and this allows us to do mask/unmask with a single
- * shift operation instead of having to map the IRQ number to
- * a HW IRQ number.
- */
-#define	IRQ_IXP2000_SOFT_INT		0 /* soft interrupt */
-#define	IRQ_IXP2000_ERRSUM		1 /* OR of all bits in ErrorStatus reg*/
-#define	IRQ_IXP2000_UART		2
-#define	IRQ_IXP2000_GPIO		3
-#define	IRQ_IXP2000_TIMER1     		4
-#define	IRQ_IXP2000_TIMER2     		5
-#define	IRQ_IXP2000_TIMER3     		6
-#define	IRQ_IXP2000_TIMER4     		7
-#define	IRQ_IXP2000_PMU        		8               
-#define	IRQ_IXP2000_SPF        		9  /* Slow port framer IRQ */
-#define	IRQ_IXP2000_DMA1      		10
-#define	IRQ_IXP2000_DMA2      		11
-#define	IRQ_IXP2000_DMA3      		12
-#define	IRQ_IXP2000_PCI_DOORBELL	13
-#define	IRQ_IXP2000_ME_ATTN       	14 
-#define	IRQ_IXP2000_PCI   		15 /* PCI INTA or INTB */
-#define	IRQ_IXP2000_THDA0   		16 /* thread 0-31A */
-#define	IRQ_IXP2000_THDA1  		17 /* thread 32-63A, IXP2800 only */
-#define	IRQ_IXP2000_THDA2		18 /* thread 64-95A */
-#define	IRQ_IXP2000_THDA3 		19 /* thread 96-127A, IXP2800 only */
-#define	IRQ_IXP2000_THDB0		24 /* thread 0-31B */
-#define	IRQ_IXP2000_THDB1		25 /* thread 32-63B, IXP2800 only */
-#define	IRQ_IXP2000_THDB2		26 /* thread 64-95B */
-#define	IRQ_IXP2000_THDB3		27 /* thread 96-127B, IXP2800 only */
-
-/* define generic GPIOs */
-#define IRQ_IXP2000_GPIO0		32
-#define IRQ_IXP2000_GPIO1		33
-#define IRQ_IXP2000_GPIO2		34
-#define IRQ_IXP2000_GPIO3		35
-#define IRQ_IXP2000_GPIO4		36
-#define IRQ_IXP2000_GPIO5		37
-#define IRQ_IXP2000_GPIO6		38
-#define IRQ_IXP2000_GPIO7		39
-
-/* split off the 2 PCI sources */
-#define IRQ_IXP2000_PCIA		40
-#define IRQ_IXP2000_PCIB		41
-
-/* Int sources from IRQ_ERROR_STATUS */
-#define IRQ_IXP2000_DRAM0_MIN_ERR	42
-#define IRQ_IXP2000_DRAM0_MAJ_ERR	43
-#define IRQ_IXP2000_DRAM1_MIN_ERR	44
-#define IRQ_IXP2000_DRAM1_MAJ_ERR	45
-#define IRQ_IXP2000_DRAM2_MIN_ERR	46
-#define IRQ_IXP2000_DRAM2_MAJ_ERR	47
-/* 48-57 reserved */
-#define IRQ_IXP2000_SRAM0_ERR		58
-#define IRQ_IXP2000_SRAM1_ERR		59
-#define IRQ_IXP2000_SRAM2_ERR		60
-#define IRQ_IXP2000_SRAM3_ERR		61
-/* 62-65 reserved */
-#define IRQ_IXP2000_MEDIA_ERR		66
-#define IRQ_IXP2000_PCI_ERR			67
-#define IRQ_IXP2000_SP_INT			68
-
-#define NR_IXP2000_IRQS				69
-
-#define	IXP2000_BOARD_IRQ(x)		(NR_IXP2000_IRQS + (x))
-
-#define	IXP2000_BOARD_IRQ_MASK(irq)	(1 << (irq - NR_IXP2000_IRQS))	
-
-#define IXP2000_ERR_IRQ_MASK(irq) ( 1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))
-#define IXP2000_VALID_ERR_IRQ_MASK (\
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MIN_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MAJ_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MIN_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MAJ_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MIN_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MAJ_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM0_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM1_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM2_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM3_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_MEDIA_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_PCI_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SP_INT)	)
-
-/*
- * This allows for all the on-chip sources plus up to 32 CPLD based
- * IRQs. Should be more than enough.
- */
-#define	IXP2000_BOARD_IRQS		32
-#define NR_IRQS				(NR_IXP2000_IRQS + IXP2000_BOARD_IRQS)
-
-
-/* 
- * IXDP2400 specific IRQs
- */
-#define	IRQ_IXDP2400_INGRESS_NPU	IXP2000_BOARD_IRQ(0) 
-#define	IRQ_IXDP2400_ENET		IXP2000_BOARD_IRQ(1) 
-#define	IRQ_IXDP2400_MEDIA_PCI		IXP2000_BOARD_IRQ(2) 
-#define	IRQ_IXDP2400_MEDIA_SP		IXP2000_BOARD_IRQ(3) 
-#define	IRQ_IXDP2400_SF_PCI		IXP2000_BOARD_IRQ(4) 
-#define	IRQ_IXDP2400_SF_SP		IXP2000_BOARD_IRQ(5) 
-#define	IRQ_IXDP2400_PMC		IXP2000_BOARD_IRQ(6) 
-#define	IRQ_IXDP2400_TVM		IXP2000_BOARD_IRQ(7) 
-
-#define	NR_IXDP2400_IRQS		((IRQ_IXDP2400_TVM)+1)  
-#define	IXDP2400_NR_IRQS		NR_IXDP2400_IRQS - NR_IXP2000_IRQS
-
-/* IXDP2800 specific IRQs */
-#define IRQ_IXDP2800_EGRESS_ENET	IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2800_INGRESS_NPU	IXP2000_BOARD_IRQ(1)
-#define IRQ_IXDP2800_PMC		IXP2000_BOARD_IRQ(2)
-#define IRQ_IXDP2800_FABRIC_PCI		IXP2000_BOARD_IRQ(3)
-#define IRQ_IXDP2800_FABRIC		IXP2000_BOARD_IRQ(4)
-#define IRQ_IXDP2800_MEDIA		IXP2000_BOARD_IRQ(5)
-
-#define	NR_IXDP2800_IRQS		((IRQ_IXDP2800_MEDIA)+1)
-#define	IXDP2800_NR_IRQS		NR_IXDP2800_IRQS - NR_IXP2000_IRQS
-
-/* 
- * IRQs on both IXDP2x01 boards
- */
-#define IRQ_IXDP2X01_SPCI_DB_0		IXP2000_BOARD_IRQ(2)
-#define IRQ_IXDP2X01_SPCI_DB_1		IXP2000_BOARD_IRQ(3)
-#define IRQ_IXDP2X01_SPCI_PMC_INTA	IXP2000_BOARD_IRQ(4)
-#define IRQ_IXDP2X01_SPCI_PMC_INTB	IXP2000_BOARD_IRQ(5)
-#define IRQ_IXDP2X01_SPCI_PMC_INTC	IXP2000_BOARD_IRQ(6)
-#define IRQ_IXDP2X01_SPCI_PMC_INTD	IXP2000_BOARD_IRQ(7)
-#define IRQ_IXDP2X01_SPCI_FIC_INT	IXP2000_BOARD_IRQ(8)
-#define IRQ_IXDP2X01_IPMI_FROM		IXP2000_BOARD_IRQ(16)
-#define IRQ_IXDP2X01_125US		IXP2000_BOARD_IRQ(17)
-#define IRQ_IXDP2X01_DB_0_ADD		IXP2000_BOARD_IRQ(18)
-#define IRQ_IXDP2X01_DB_1_ADD		IXP2000_BOARD_IRQ(19)
-#define IRQ_IXDP2X01_UART1		IXP2000_BOARD_IRQ(21)
-#define IRQ_IXDP2X01_UART2		IXP2000_BOARD_IRQ(22)
-#define IRQ_IXDP2X01_FIC_ADD_INT	IXP2000_BOARD_IRQ(24)
-#define IRQ_IXDP2X01_CS8900		IXP2000_BOARD_IRQ(25)
-#define IRQ_IXDP2X01_BBSRAM		IXP2000_BOARD_IRQ(26)
-
-#define IXDP2X01_VALID_IRQ_MASK ( \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_0) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_1) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTA) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTB) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTC) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTD) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_FIC_INT) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_IPMI_FROM) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_125US) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_0_ADD) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_1_ADD) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART1) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART2) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_FIC_ADD_INT) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_CS8900) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_BBSRAM) )
-
-/* 
- * IXDP2401 specific IRQs
- */
-#define IRQ_IXDP2401_INTA_82546		IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2401_INTB_82546		IXP2000_BOARD_IRQ(1)
-
-#define	IXDP2401_VALID_IRQ_MASK ( \
-		IXDP2X01_VALID_IRQ_MASK | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTA_82546) |\
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTB_82546))
-
-/*
- * IXDP2801-specific IRQs
- */
-#define IRQ_IXDP2801_RIV		IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2801_CNFG_MEDIA		IXP2000_BOARD_IRQ(27)
-#define IRQ_IXDP2801_CLOCK_REF		IXP2000_BOARD_IRQ(28)
-
-#define	IXDP2801_VALID_IRQ_MASK ( \
-		IXDP2X01_VALID_IRQ_MASK | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_RIV) |\
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CNFG_MEDIA) |\
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CLOCK_REF))
-
-#define	NR_IXDP2X01_IRQS		((IRQ_IXDP2801_CLOCK_REF) + 1)
-
-#endif /*_IRQS_H*/
diff --git a/include/asm-arm/arch-ixp2000/ixdp2x00.h b/include/asm-arm/arch-ixp2000/ixdp2x00.h
deleted file mode 100644
index 546e2e8..0000000
--- a/include/asm-arm/arch-ixp2000/ixdp2x00.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/ixdp2x00.h
- *
- * Register and other defines for IXDP2[48]00 platforms
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#ifndef _IXDP2X00_H_
-#define _IXDP2X00_H_
-
-/*
- * On board CPLD memory map
- */
-#define IXDP2X00_PHYS_CPLD_BASE		0xc7000000
-#define IXDP2X00_VIRT_CPLD_BASE		0xfe000000
-#define IXDP2X00_CPLD_SIZE		0x00100000
-
-
-#define IXDP2X00_CPLD_REG(x)  	\
-	(volatile unsigned long *)(IXDP2X00_VIRT_CPLD_BASE | x)
-
-/*
- * IXDP2400 CPLD registers
- */
-#define IXDP2400_CPLD_SYSLED		IXDP2X00_CPLD_REG(0x0)  
-#define IXDP2400_CPLD_DISP_DATA		IXDP2X00_CPLD_REG(0x4)
-#define IXDP2400_CPLD_CLOCK_SPEED	IXDP2X00_CPLD_REG(0x8)
-#define IXDP2400_CPLD_INT_STAT		IXDP2X00_CPLD_REG(0xc)
-#define IXDP2400_CPLD_REV		IXDP2X00_CPLD_REG(0x10)
-#define IXDP2400_CPLD_SYS_CLK_M		IXDP2X00_CPLD_REG(0x14)
-#define IXDP2400_CPLD_SYS_CLK_N		IXDP2X00_CPLD_REG(0x18)
-#define IXDP2400_CPLD_INT_MASK		IXDP2X00_CPLD_REG(0x48)
-
-/*
- * IXDP2800 CPLD registers
- */
-#define IXDP2800_CPLD_INT_STAT		IXDP2X00_CPLD_REG(0x0)
-#define IXDP2800_CPLD_INT_MASK		IXDP2X00_CPLD_REG(0x140)
-
-
-#define	IXDP2X00_GPIO_I2C_ENABLE	0x02
-#define	IXDP2X00_GPIO_SCL		0x07
-#define	IXDP2X00_GPIO_SDA		0x06
-
-/*
- * PCI devfns for on-board devices. We need these to be able to
- * properly translate IRQs and for device removal.
- */
-#define	IXDP2400_SLAVE_ENET_DEVFN	0x18	/* Bus 1 */
-#define	IXDP2400_MASTER_ENET_DEVFN	0x20	/* Bus 1 */
-#define	IXDP2400_MEDIA_DEVFN		0x28	/* Bus 1 */
-#define	IXDP2400_SWITCH_FABRIC_DEVFN	0x30	/* Bus 1 */
-
-#define	IXDP2800_SLAVE_ENET_DEVFN	0x20	/* Bus 1 */
-#define	IXDP2800_MASTER_ENET_DEVFN	0x18	/* Bus 1 */
-#define	IXDP2800_SWITCH_FABRIC_DEVFN	0x30	/* Bus 1 */
-
-#define	IXDP2X00_P2P_DEVFN		0x20	/* Bus 0 */
-#define	IXDP2X00_21555_DEVFN		0x30	/* Bus 0 */
-#define IXDP2X00_SLAVE_NPU_DEVFN	0x28	/* Bus 1 */
-#define	IXDP2X00_PMC_DEVFN		0x38	/* Bus 1 */
-#define IXDP2X00_MASTER_NPU_DEVFN	0x38	/* Bus 1 */
-
-#ifndef __ASSEMBLY__
-/*
- * The master NPU is always PCI master.
- */
-static inline unsigned int ixdp2x00_master_npu(void)
-{
-	return !!ixp2000_is_pcimaster();
-}
-
-/*
- * Helper functions used by ixdp2400 and ixdp2800 specific code
- */
-void ixdp2x00_init_irq(volatile unsigned long*, volatile unsigned long *, unsigned long);
-void ixdp2x00_slave_pci_postinit(void);
-void ixdp2x00_init_machine(void);
-void ixdp2x00_map_io(void);
-
-#endif
-
-#endif /*_IXDP2X00_H_ */
diff --git a/include/asm-arm/arch-ixp2000/ixdp2x01.h b/include/asm-arm/arch-ixp2000/ixdp2x01.h
deleted file mode 100644
index c6d5142..0000000
--- a/include/asm-arm/arch-ixp2000/ixdp2x01.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/ixdp2x01.h
- *
- * Platform definitions for IXDP2X01 && IXDP2801 systems
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista Software, Inc. 
- *
- * Based on original code Copyright (c) 2002-2003 Intel Corporation
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __IXDP2X01_H__
-#define __IXDP2X01_H__
-
-#define	IXDP2X01_PHYS_CPLD_BASE		0xc6024000
-#define	IXDP2X01_VIRT_CPLD_BASE		0xfe000000
-#define	IXDP2X01_CPLD_REGION_SIZE	0x00100000
-
-#define IXDP2X01_CPLD_VIRT_REG(reg) (volatile unsigned long*)(IXDP2X01_VIRT_CPLD_BASE | reg)
-#define IXDP2X01_CPLD_PHYS_REG(reg) (IXDP2X01_PHYS_CPLD_BASE | reg)
-
-#define IXDP2X01_UART1_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x40)
-#define IXDP2X01_UART1_PHYS_BASE	IXDP2X01_CPLD_PHYS_REG(0x40)
-
-#define IXDP2X01_UART2_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x60)
-#define IXDP2X01_UART2_PHYS_BASE	IXDP2X01_CPLD_PHYS_REG(0x60)
-
-#define IXDP2X01_CS8900_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x80)
-#define IXDP2X01_CS8900_VIRT_END	(IXDP2X01_CS8900_VIRT_BASE + 16)
-
-#define IXDP2X01_CPLD_RESET_REG         IXDP2X01_CPLD_VIRT_REG(0x00)
-#define IXDP2X01_INT_MASK_SET_REG	IXDP2X01_CPLD_VIRT_REG(0x08)
-#define IXDP2X01_INT_STAT_REG		IXDP2X01_CPLD_VIRT_REG(0x0C)
-#define IXDP2X01_INT_RAW_REG		IXDP2X01_CPLD_VIRT_REG(0x10) 
-#define IXDP2X01_INT_MASK_CLR_REG	IXDP2X01_INT_RAW_REG
-#define IXDP2X01_INT_SIM_REG		IXDP2X01_CPLD_VIRT_REG(0x14)
-
-#define IXDP2X01_CPLD_FLASH_REG		IXDP2X01_CPLD_VIRT_REG(0x20)
-
-#define IXDP2X01_CPLD_FLASH_INTERN 	0x8000
-#define IXDP2X01_CPLD_FLASH_BANK_MASK 	0xF
-#define IXDP2X01_FLASH_WINDOW_BITS 	25
-#define IXDP2X01_FLASH_WINDOW_SIZE 	(1 << IXDP2X01_FLASH_WINDOW_BITS)
-#define IXDP2X01_FLASH_WINDOW_MASK 	(IXDP2X01_FLASH_WINDOW_SIZE - 1)
-
-#define	IXDP2X01_UART_CLK		1843200
-
-#define	IXDP2X01_GPIO_I2C_ENABLE	0x02
-#define	IXDP2X01_GPIO_SCL		0x07
-#define	IXDP2X01_GPIO_SDA		0x06
-
-#endif /* __IXDP2x01_H__ */
diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
deleted file mode 100644
index ccae4be..0000000
--- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h
+++ /dev/null
@@ -1,457 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/ixp2000-regs.h
- *
- * Chipset register definitions for IXP2400/2800 based systems.
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#ifndef _IXP2000_REGS_H_
-#define _IXP2000_REGS_H_
-
-/*
- * IXP2000 linux memory map:
- *
- * virt		phys		size
- * fb000000	db000000	16M		PCI CFG1
- * fc000000	da000000	16M		PCI CFG0
- * fd000000	d8000000	16M		PCI I/O
- * fe[0-7]00000			8M		per-platform mappings
- * fe900000	80000000	1M		SRAM #0 (first MB)
- * fea00000	cb400000	1M		SCRATCH ring get/put
- * feb00000	c8000000	1M		MSF
- * fec00000	df000000	1M		PCI CSRs
- * fed00000	de000000	1M		PCI CREG
- * fee00000	d6000000	1M		INTCTL
- * fef00000	c0000000	1M		CAP
- */
-
-/* 
- * Static I/O regions.
- *
- * Most of the registers are clumped in 4K regions spread throughout
- * the 0xc0000000 -> 0xc0100000 address range, but we just map in
- * the whole range using a single 1 MB section instead of small
- * 4K pages.  This has two advantages for us:
- *
- * 1) We use only one TLB entry for large number of on-chip I/O devices.
- *
- * 2) We can easily set the Section attributes to XCB=101 on the IXP2400
- *    as required per erratum #66.  We accomplish this by using a
- *    new MT_IXP2000_DEVICE memory type with the bits set as required.
- *
- * CAP stands for CSR Access Proxy.
- *
- * If you change the virtual address of this mapping, please propagate
- * the change to arch/arm/kernel/debug.S, which hardcodes the virtual
- * address of the UART located in this region.
- */
-
-#define	IXP2000_CAP_PHYS_BASE		0xc0000000
-#define	IXP2000_CAP_VIRT_BASE		0xfef00000
-#define	IXP2000_CAP_SIZE		0x00100000
-
-/*
- * Addresses for specific on-chip peripherals.
- */
-#define	IXP2000_SLOWPORT_CSR_VIRT_BASE	0xfef80000
-#define	IXP2000_GLOBAL_REG_VIRT_BASE	0xfef04000
-#define	IXP2000_UART_PHYS_BASE		0xc0030000
-#define	IXP2000_UART_VIRT_BASE		0xfef30000
-#define	IXP2000_TIMER_VIRT_BASE		0xfef20000
-#define	IXP2000_UENGINE_CSR_VIRT_BASE	0xfef18000
-#define	IXP2000_GPIO_VIRT_BASE		0xfef10000
-
-/*
- * Devices outside of the 0xc0000000 -> 0xc0100000 range.  The virtual
- * addresses of the INTCTL and PCI_CSR mappings are hardcoded in
- * entry-macro.S, so if you ever change these please propagate
- * the change.
- */
-#define IXP2000_INTCTL_PHYS_BASE	0xd6000000
-#define	IXP2000_INTCTL_VIRT_BASE	0xfee00000
-#define	IXP2000_INTCTL_SIZE		0x00100000
-
-#define IXP2000_PCI_CREG_PHYS_BASE	0xde000000
-#define	IXP2000_PCI_CREG_VIRT_BASE	0xfed00000
-#define	IXP2000_PCI_CREG_SIZE		0x00100000
-
-#define IXP2000_PCI_CSR_PHYS_BASE	0xdf000000
-#define	IXP2000_PCI_CSR_VIRT_BASE	0xfec00000
-#define	IXP2000_PCI_CSR_SIZE		0x00100000
-
-#define IXP2000_MSF_PHYS_BASE		0xc8000000
-#define IXP2000_MSF_VIRT_BASE		0xfeb00000
-#define IXP2000_MSF_SIZE		0x00100000
-
-#define IXP2000_SCRATCH_RING_PHYS_BASE	0xcb400000
-#define IXP2000_SCRATCH_RING_VIRT_BASE	0xfea00000
-#define IXP2000_SCRATCH_RING_SIZE	0x00100000
-
-#define IXP2000_SRAM0_PHYS_BASE		0x80000000
-#define IXP2000_SRAM0_VIRT_BASE		0xfe900000
-#define IXP2000_SRAM0_SIZE		0x00100000
-
-#define IXP2000_PCI_IO_PHYS_BASE	0xd8000000
-#define	IXP2000_PCI_IO_VIRT_BASE	0xfd000000
-#define IXP2000_PCI_IO_SIZE     	0x01000000
-
-#define IXP2000_PCI_CFG0_PHYS_BASE	0xda000000
-#define IXP2000_PCI_CFG0_VIRT_BASE	0xfc000000
-#define IXP2000_PCI_CFG0_SIZE   	0x01000000
-
-#define IXP2000_PCI_CFG1_PHYS_BASE	0xdb000000
-#define IXP2000_PCI_CFG1_VIRT_BASE	0xfb000000
-#define IXP2000_PCI_CFG1_SIZE		0x01000000
-
-/* 
- * Timers
- */
-#define	IXP2000_TIMER_REG(x)		((volatile unsigned long*)(IXP2000_TIMER_VIRT_BASE | (x)))
-/* Timer control */
-#define	IXP2000_T1_CTL			IXP2000_TIMER_REG(0x00)
-#define	IXP2000_T2_CTL			IXP2000_TIMER_REG(0x04)
-#define	IXP2000_T3_CTL			IXP2000_TIMER_REG(0x08)
-#define	IXP2000_T4_CTL			IXP2000_TIMER_REG(0x0c)
-/* Store initial value */
-#define	IXP2000_T1_CLD			IXP2000_TIMER_REG(0x10)
-#define	IXP2000_T2_CLD			IXP2000_TIMER_REG(0x14)
-#define	IXP2000_T3_CLD			IXP2000_TIMER_REG(0x18)
-#define	IXP2000_T4_CLD			IXP2000_TIMER_REG(0x1c)
-/* Read current value */
-#define	IXP2000_T1_CSR			IXP2000_TIMER_REG(0x20)
-#define	IXP2000_T2_CSR			IXP2000_TIMER_REG(0x24)
-#define	IXP2000_T3_CSR			IXP2000_TIMER_REG(0x28)
-#define	IXP2000_T4_CSR			IXP2000_TIMER_REG(0x2c)
-/* Clear associated timer interrupt */
-#define	IXP2000_T1_CLR			IXP2000_TIMER_REG(0x30)
-#define	IXP2000_T2_CLR			IXP2000_TIMER_REG(0x34)
-#define	IXP2000_T3_CLR			IXP2000_TIMER_REG(0x38)
-#define	IXP2000_T4_CLR			IXP2000_TIMER_REG(0x3c)
-/* Timer watchdog enable for T4 */
-#define	IXP2000_TWDE			IXP2000_TIMER_REG(0x40)
-
-#define	WDT_ENABLE			0x00000001
-#define	TIMER_DIVIDER_256		0x00000008
-#define	TIMER_ENABLE			0x00000080
-#define	IRQ_MASK_TIMER1         	(1 << 4)
-
-/*
- * Interrupt controller registers
- */
-#define IXP2000_INTCTL_REG(x)		(volatile unsigned long*)(IXP2000_INTCTL_VIRT_BASE | (x))
-#define IXP2000_IRQ_STATUS		IXP2000_INTCTL_REG(0x08)
-#define IXP2000_IRQ_ENABLE		IXP2000_INTCTL_REG(0x10)
-#define IXP2000_IRQ_ENABLE_SET		IXP2000_INTCTL_REG(0x10)
-#define IXP2000_IRQ_ENABLE_CLR		IXP2000_INTCTL_REG(0x18)
-#define IXP2000_FIQ_ENABLE_CLR		IXP2000_INTCTL_REG(0x14)
-#define IXP2000_IRQ_ERR_STATUS		IXP2000_INTCTL_REG(0x24)
-#define IXP2000_IRQ_ERR_ENABLE_SET	IXP2000_INTCTL_REG(0x2c)
-#define IXP2000_FIQ_ERR_ENABLE_CLR	IXP2000_INTCTL_REG(0x30)
-#define IXP2000_IRQ_ERR_ENABLE_CLR	IXP2000_INTCTL_REG(0x34)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_0	IXP2000_INTCTL_REG(0x60)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_1	IXP2000_INTCTL_REG(0x64)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_2	IXP2000_INTCTL_REG(0x68)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_3	IXP2000_INTCTL_REG(0x6c)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_0	IXP2000_INTCTL_REG(0x80)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_1	IXP2000_INTCTL_REG(0x84)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_2	IXP2000_INTCTL_REG(0x88)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_3	IXP2000_INTCTL_REG(0x8c)
-#define IXP2000_IRQ_THD_STATUS_A_0	IXP2000_INTCTL_REG(0xe0)
-#define IXP2000_IRQ_THD_STATUS_A_1	IXP2000_INTCTL_REG(0xe4)
-#define IXP2000_IRQ_THD_STATUS_A_2	IXP2000_INTCTL_REG(0xe8)
-#define IXP2000_IRQ_THD_STATUS_A_3	IXP2000_INTCTL_REG(0xec)
-#define IXP2000_IRQ_THD_STATUS_B_0	IXP2000_INTCTL_REG(0x100)
-#define IXP2000_IRQ_THD_STATUS_B_1	IXP2000_INTCTL_REG(0x104)
-#define IXP2000_IRQ_THD_STATUS_B_2	IXP2000_INTCTL_REG(0x108)
-#define IXP2000_IRQ_THD_STATUS_B_3	IXP2000_INTCTL_REG(0x10c)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_0	IXP2000_INTCTL_REG(0x160)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_1	IXP2000_INTCTL_REG(0x164)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_2	IXP2000_INTCTL_REG(0x168)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_3	IXP2000_INTCTL_REG(0x16c)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_0	IXP2000_INTCTL_REG(0x180)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_1	IXP2000_INTCTL_REG(0x184)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_2	IXP2000_INTCTL_REG(0x188)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_3	IXP2000_INTCTL_REG(0x18c)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_0	IXP2000_INTCTL_REG(0x1e0)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_1	IXP2000_INTCTL_REG(0x1e4)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_2	IXP2000_INTCTL_REG(0x1e8)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_3	IXP2000_INTCTL_REG(0x1ec)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_0	IXP2000_INTCTL_REG(0x200)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_1	IXP2000_INTCTL_REG(0x204)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_2	IXP2000_INTCTL_REG(0x208)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_3	IXP2000_INTCTL_REG(0x20c)
-
-/*
- * Mask of valid IRQs in the 32-bit IRQ register. We use
- * this to mark certain IRQs as being invalid.
- */
-#define	IXP2000_VALID_IRQ_MASK	0x0f0fffff
-
-/*
- * PCI config register access from core
- */
-#define IXP2000_PCI_CREG(x)		(volatile unsigned long*)(IXP2000_PCI_CREG_VIRT_BASE | (x))
-#define IXP2000_PCI_CMDSTAT 		IXP2000_PCI_CREG(0x04)
-#define IXP2000_PCI_CSR_BAR		IXP2000_PCI_CREG(0x10)
-#define IXP2000_PCI_SRAM_BAR		IXP2000_PCI_CREG(0x14)
-#define IXP2000_PCI_SDRAM_BAR		IXP2000_PCI_CREG(0x18)
-
-/*
- * PCI CSRs
- */
-#define IXP2000_PCI_CSR(x)		(volatile unsigned long*)(IXP2000_PCI_CSR_VIRT_BASE | (x))
-
-/*
- * PCI outbound interrupts
- */
-#define IXP2000_PCI_OUT_INT_STATUS	IXP2000_PCI_CSR(0x30)
-#define IXP2000_PCI_OUT_INT_MASK	IXP2000_PCI_CSR(0x34)
-/*
- * PCI communications
- */
-#define IXP2000_PCI_MAILBOX0		IXP2000_PCI_CSR(0x50)
-#define IXP2000_PCI_MAILBOX1		IXP2000_PCI_CSR(0x54)
-#define IXP2000_PCI_MAILBOX2		IXP2000_PCI_CSR(0x58)
-#define IXP2000_PCI_MAILBOX3		IXP2000_PCI_CSR(0x5C)
-#define IXP2000_XSCALE_DOORBELL		IXP2000_PCI_CSR(0x60)
-#define IXP2000_XSCALE_DOORBELL_SETUP	IXP2000_PCI_CSR(0x64)
-#define IXP2000_PCI_DOORBELL		IXP2000_PCI_CSR(0x70)
-#define IXP2000_PCI_DOORBELL_SETUP	IXP2000_PCI_CSR(0x74)
-
-/*
- * DMA engines
- */
-#define IXP2000_PCI_CH1_BYTE_CNT	IXP2000_PCI_CSR(0x80)
-#define IXP2000_PCI_CH1_ADDR		IXP2000_PCI_CSR(0x84)
-#define IXP2000_PCI_CH1_DRAM_ADDR	IXP2000_PCI_CSR(0x88)
-#define IXP2000_PCI_CH1_DESC_PTR	IXP2000_PCI_CSR(0x8C)
-#define IXP2000_PCI_CH1_CNTRL		IXP2000_PCI_CSR(0x90)
-#define IXP2000_PCI_CH1_ME_PARAM	IXP2000_PCI_CSR(0x94)
-#define IXP2000_PCI_CH2_BYTE_CNT	IXP2000_PCI_CSR(0xA0)
-#define IXP2000_PCI_CH2_ADDR		IXP2000_PCI_CSR(0xA4)
-#define IXP2000_PCI_CH2_DRAM_ADDR	IXP2000_PCI_CSR(0xA8)
-#define IXP2000_PCI_CH2_DESC_PTR	IXP2000_PCI_CSR(0xAC)
-#define IXP2000_PCI_CH2_CNTRL		IXP2000_PCI_CSR(0xB0)
-#define IXP2000_PCI_CH2_ME_PARAM	IXP2000_PCI_CSR(0xB4)
-#define IXP2000_PCI_CH3_BYTE_CNT	IXP2000_PCI_CSR(0xC0)
-#define IXP2000_PCI_CH3_ADDR		IXP2000_PCI_CSR(0xC4)
-#define IXP2000_PCI_CH3_DRAM_ADDR	IXP2000_PCI_CSR(0xC8)
-#define IXP2000_PCI_CH3_DESC_PTR	IXP2000_PCI_CSR(0xCC)
-#define IXP2000_PCI_CH3_CNTRL		IXP2000_PCI_CSR(0xD0)
-#define IXP2000_PCI_CH3_ME_PARAM	IXP2000_PCI_CSR(0xD4)
-#define IXP2000_DMA_INF_MODE		IXP2000_PCI_CSR(0xE0)
-/*
- * Size masks for BARs
- */
-#define IXP2000_PCI_SRAM_BASE_ADDR_MASK	IXP2000_PCI_CSR(0xFC)
-#define IXP2000_PCI_DRAM_BASE_ADDR_MASK	IXP2000_PCI_CSR(0x100)
-/*
- * Control and uEngine related
- */
-#define IXP2000_PCI_CONTROL		IXP2000_PCI_CSR(0x13C)
-#define IXP2000_PCI_ADDR_EXT		IXP2000_PCI_CSR(0x140)
-#define IXP2000_PCI_ME_PUSH_STATUS	IXP2000_PCI_CSR(0x148)
-#define IXP2000_PCI_ME_PUSH_EN		IXP2000_PCI_CSR(0x14C)
-#define IXP2000_PCI_ERR_STATUS		IXP2000_PCI_CSR(0x150)
-#define IXP2000_PCI_ERR_ENABLE		IXP2000_PCI_CSR(0x154)
-/*
- * Inbound PCI interrupt control
- */
-#define IXP2000_PCI_XSCALE_INT_STATUS	IXP2000_PCI_CSR(0x158)
-#define IXP2000_PCI_XSCALE_INT_ENABLE	IXP2000_PCI_CSR(0x15C)
-
-#define IXP2000_PCICNTL_PNR		(1<<17)	/* PCI not Reset bit of PCI_CONTROL */
-#define IXP2000_PCICNTL_PCF		(1<<28)	/* PCI Central function bit */
-#define IXP2000_XSCALE_INT		(1<<1)	/* Interrupt from XScale to PCI */
-
-/* These are from the IRQ register in the PCI ISR register */
-#define PCI_CONTROL_BE_DEO		(1 << 22)	/* Big Endian Data Enable Out */
-#define PCI_CONTROL_BE_DEI		(1 << 21)	/* Big Endian Data Enable In  */
-#define PCI_CONTROL_BE_BEO		(1 << 20)	/* Big Endian Byte Enable Out */
-#define PCI_CONTROL_BE_BEI		(1 << 19)	/* Big Endian Byte Enable In  */
-#define PCI_CONTROL_IEE			(1 << 17)	/* I/O cycle Endian swap Enable */
-
-#define IXP2000_PCI_RST_REL		(1 << 2)
-#define CFG_RST_DIR			(*IXP2000_PCI_CONTROL & IXP2000_PCICNTL_PCF)
-#define CFG_PCI_BOOT_HOST		(1 << 2)
-#define CFG_BOOT_PROM			(1 << 1)
-
-/*
- * SlowPort CSRs
- *
- * The slowport is used to access things like flash, SONET framer control
- * ports, slave microprocessors, CPLDs, and others of chip memory mapped
- * peripherals.
- */
-#define	SLOWPORT_CSR(x)		(volatile unsigned long*)(IXP2000_SLOWPORT_CSR_VIRT_BASE | (x))
-
-#define	IXP2000_SLOWPORT_CCR		SLOWPORT_CSR(0x00)
-#define	IXP2000_SLOWPORT_WTC1		SLOWPORT_CSR(0x04)
-#define	IXP2000_SLOWPORT_WTC2		SLOWPORT_CSR(0x08)
-#define	IXP2000_SLOWPORT_RTC1		SLOWPORT_CSR(0x0c)
-#define	IXP2000_SLOWPORT_RTC2		SLOWPORT_CSR(0x10)
-#define	IXP2000_SLOWPORT_FSR		SLOWPORT_CSR(0x14)
-#define	IXP2000_SLOWPORT_PCR		SLOWPORT_CSR(0x18)
-#define	IXP2000_SLOWPORT_ADC		SLOWPORT_CSR(0x1C)
-#define	IXP2000_SLOWPORT_FAC		SLOWPORT_CSR(0x20)
-#define	IXP2000_SLOWPORT_FRM		SLOWPORT_CSR(0x24)
-#define	IXP2000_SLOWPORT_FIN		SLOWPORT_CSR(0x28)
-
-/*
- * CCR values.  
- * The CCR configures the clock division for the slowport interface.
- */
-#define	SLOWPORT_CCR_DIV_1		0x00
-#define	SLOWPORT_CCR_DIV_2		0x01
-#define	SLOWPORT_CCR_DIV_4		0x02
-#define	SLOWPORT_CCR_DIV_6		0x03
-#define	SLOWPORT_CCR_DIV_8		0x04
-#define	SLOWPORT_CCR_DIV_10		0x05
-#define	SLOWPORT_CCR_DIV_12		0x06
-#define	SLOWPORT_CCR_DIV_14		0x07
-#define	SLOWPORT_CCR_DIV_16		0x08
-#define	SLOWPORT_CCR_DIV_18		0x09
-#define	SLOWPORT_CCR_DIV_20		0x0a
-#define	SLOWPORT_CCR_DIV_22		0x0b
-#define	SLOWPORT_CCR_DIV_24		0x0c
-#define	SLOWPORT_CCR_DIV_26		0x0d
-#define	SLOWPORT_CCR_DIV_28		0x0e
-#define	SLOWPORT_CCR_DIV_30		0x0f
-
-/*
- * PCR values.  PCR configure the mode of the interface.
- */
-#define	SLOWPORT_MODE_FLASH		0x00
-#define	SLOWPORT_MODE_LUCENT		0x01
-#define	SLOWPORT_MODE_PMC_SIERRA	0x02
-#define	SLOWPORT_MODE_INTEL_UP		0x03
-#define	SLOWPORT_MODE_MOTOROLA_UP	0x04
-
-/*
- * ADC values.  Defines data and address bus widths.
- */
-#define	SLOWPORT_ADDR_WIDTH_8		0x00
-#define	SLOWPORT_ADDR_WIDTH_16		0x01
-#define	SLOWPORT_ADDR_WIDTH_24		0x02
-#define	SLOWPORT_ADDR_WIDTH_32		0x03
-#define	SLOWPORT_DATA_WIDTH_8		0x00
-#define	SLOWPORT_DATA_WIDTH_16		0x10
-#define	SLOWPORT_DATA_WIDTH_24		0x20
-#define	SLOWPORT_DATA_WIDTH_32		0x30
-
-/*
- * Masks and shifts for various fields in the WTC and RTC registers.
- */
-#define	SLOWPORT_WRTC_MASK_HD		0x0003
-#define	SLOWPORT_WRTC_MASK_PW		0x003c
-#define	SLOWPORT_WRTC_MASK_SU		0x03c0
-
-#define	SLOWPORT_WRTC_SHIFT_HD		0x00
-#define	SLOWPORT_WRTC_SHIFT_SU		0x02
-#define	SLOWPORT_WRTC_SHFIT_PW		0x06
-
-
-/*
- * GPIO registers & GPIO interface.
- */
-#define IXP2000_GPIO_REG(x)		((volatile unsigned long*)(IXP2000_GPIO_VIRT_BASE+(x)))
-#define IXP2000_GPIO_PLR		IXP2000_GPIO_REG(0x00)
-#define IXP2000_GPIO_PDPR		IXP2000_GPIO_REG(0x04)
-#define IXP2000_GPIO_PDSR		IXP2000_GPIO_REG(0x08)
-#define IXP2000_GPIO_PDCR		IXP2000_GPIO_REG(0x0c)
-#define IXP2000_GPIO_POPR		IXP2000_GPIO_REG(0x10)
-#define IXP2000_GPIO_POSR		IXP2000_GPIO_REG(0x14)
-#define IXP2000_GPIO_POCR		IXP2000_GPIO_REG(0x18)
-#define IXP2000_GPIO_REDR		IXP2000_GPIO_REG(0x1c)
-#define IXP2000_GPIO_FEDR		IXP2000_GPIO_REG(0x20)
-#define IXP2000_GPIO_EDSR		IXP2000_GPIO_REG(0x24)
-#define IXP2000_GPIO_LSHR		IXP2000_GPIO_REG(0x28)
-#define IXP2000_GPIO_LSLR		IXP2000_GPIO_REG(0x2c)
-#define IXP2000_GPIO_LDSR		IXP2000_GPIO_REG(0x30)
-#define IXP2000_GPIO_INER		IXP2000_GPIO_REG(0x34)
-#define IXP2000_GPIO_INSR		IXP2000_GPIO_REG(0x38)
-#define IXP2000_GPIO_INCR		IXP2000_GPIO_REG(0x3c)
-#define IXP2000_GPIO_INST		IXP2000_GPIO_REG(0x40)
-
-/*
- * "Global" registers...whatever that's supposed to mean.
- */
-#define GLOBAL_REG_BASE			(IXP2000_GLOBAL_REG_VIRT_BASE + 0x0a00)
-#define GLOBAL_REG(x)			(volatile unsigned long*)(GLOBAL_REG_BASE | (x))
-
-#define IXP2000_MAJ_PROD_TYPE_MASK	0x001F0000
-#define IXP2000_MAJ_PROD_TYPE_IXP2000	0x00000000
-#define IXP2000_MIN_PROD_TYPE_MASK 	0x0000FF00
-#define IXP2000_MIN_PROD_TYPE_IXP2400	0x00000200
-#define IXP2000_MIN_PROD_TYPE_IXP2850	0x00000100
-#define IXP2000_MIN_PROD_TYPE_IXP2800	0x00000000
-#define IXP2000_MAJ_REV_MASK	      	0x000000F0
-#define IXP2000_MIN_REV_MASK	      	0x0000000F
-#define IXP2000_PROD_ID_MASK		0xFFFFFFFF
-
-#define IXP2000_PRODUCT_ID		GLOBAL_REG(0x00)
-#define IXP2000_MISC_CONTROL		GLOBAL_REG(0x04)
-#define IXP2000_MSF_CLK_CNTRL  		GLOBAL_REG(0x08)
-#define IXP2000_RESET0      		GLOBAL_REG(0x0c)
-#define IXP2000_RESET1      		GLOBAL_REG(0x10)
-#define IXP2000_CCR            		GLOBAL_REG(0x14)
-#define	IXP2000_STRAP_OPTIONS  		GLOBAL_REG(0x18)
-
-#define	RSTALL				(1 << 16)
-#define	WDT_RESET_ENABLE		0x01000000
-
-
-/*
- * MSF registers.  The IXP2400 and IXP2800 have somewhat different MSF
- * units, but the registers that differ between the two don't overlap,
- * so we can have one register list for both.
- */
-#define IXP2000_MSF_REG(x)			((volatile unsigned long*)(IXP2000_MSF_VIRT_BASE + (x)))
-#define IXP2000_MSF_RX_CONTROL			IXP2000_MSF_REG(0x0000)
-#define IXP2000_MSF_TX_CONTROL			IXP2000_MSF_REG(0x0004)
-#define IXP2000_MSF_INTERRUPT_STATUS		IXP2000_MSF_REG(0x0008)
-#define IXP2000_MSF_INTERRUPT_ENABLE		IXP2000_MSF_REG(0x000c)
-#define IXP2000_MSF_CSIX_TYPE_MAP		IXP2000_MSF_REG(0x0010)
-#define IXP2000_MSF_FC_EGRESS_STATUS		IXP2000_MSF_REG(0x0014)
-#define IXP2000_MSF_FC_INGRESS_STATUS		IXP2000_MSF_REG(0x0018)
-#define IXP2000_MSF_HWM_CONTROL			IXP2000_MSF_REG(0x0024)
-#define IXP2000_MSF_FC_STATUS_OVERRIDE		IXP2000_MSF_REG(0x0028)
-#define IXP2000_MSF_CLOCK_CONTROL		IXP2000_MSF_REG(0x002c)
-#define IXP2000_MSF_RX_PORT_MAP			IXP2000_MSF_REG(0x0040)
-#define IXP2000_MSF_RBUF_ELEMENT_DONE		IXP2000_MSF_REG(0x0044)
-#define IXP2000_MSF_RX_MPHY_POLL_LIMIT		IXP2000_MSF_REG(0x0048)
-#define IXP2000_MSF_RX_CALENDAR_LENGTH		IXP2000_MSF_REG(0x0048)
-#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_0	IXP2000_MSF_REG(0x0050)
-#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_1	IXP2000_MSF_REG(0x0054)
-#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_2	IXP2000_MSF_REG(0x0058)
-#define IXP2000_MSF_TX_SEQUENCE_0		IXP2000_MSF_REG(0x0060)
-#define IXP2000_MSF_TX_SEQUENCE_1		IXP2000_MSF_REG(0x0064)
-#define IXP2000_MSF_TX_SEQUENCE_2		IXP2000_MSF_REG(0x0068)
-#define IXP2000_MSF_TX_MPHY_POLL_LIMIT		IXP2000_MSF_REG(0x0070)
-#define IXP2000_MSF_TX_CALENDAR_LENGTH		IXP2000_MSF_REG(0x0070)
-#define IXP2000_MSF_RX_UP_CONTROL_0		IXP2000_MSF_REG(0x0080)
-#define IXP2000_MSF_RX_UP_CONTROL_1		IXP2000_MSF_REG(0x0084)
-#define IXP2000_MSF_RX_UP_CONTROL_2		IXP2000_MSF_REG(0x0088)
-#define IXP2000_MSF_RX_UP_CONTROL_3		IXP2000_MSF_REG(0x008c)
-#define IXP2000_MSF_TX_UP_CONTROL_0		IXP2000_MSF_REG(0x0090)
-#define IXP2000_MSF_TX_UP_CONTROL_1		IXP2000_MSF_REG(0x0094)
-#define IXP2000_MSF_TX_UP_CONTROL_2		IXP2000_MSF_REG(0x0098)
-#define IXP2000_MSF_TX_UP_CONTROL_3		IXP2000_MSF_REG(0x009c)
-#define IXP2000_MSF_TRAIN_DATA			IXP2000_MSF_REG(0x00a0)
-#define IXP2000_MSF_TRAIN_CALENDAR		IXP2000_MSF_REG(0x00a4)
-#define IXP2000_MSF_TRAIN_FLOW_CONTROL		IXP2000_MSF_REG(0x00a8)
-#define IXP2000_MSF_TX_CALENDAR_0		IXP2000_MSF_REG(0x1000)
-#define IXP2000_MSF_RX_PORT_CALENDAR_STATUS	IXP2000_MSF_REG(0x1400)
-
-
-#endif				/* _IXP2000_H_ */
diff --git a/include/asm-arm/arch-ixp2000/memory.h b/include/asm-arm/arch-ixp2000/memory.h
deleted file mode 100644
index 21e1de5..0000000
--- a/include/asm-arm/arch-ixp2000/memory.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/memory.h
- *
- * Copyright (c) 2002 Intel Corp.
- * Copyright (c) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET	UL(0x00000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#include <asm/arch/ixp2000-regs.h>
-
-#define __virt_to_bus(v) \
-	(((__virt_to_phys(v) - 0x0) + (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)))
-
-#define __bus_to_virt(b) \
-	__phys_to_virt((((b - (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)) + 0x0)))
-
-#endif
-
diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h
deleted file mode 100644
index a66317a..0000000
--- a/include/asm-arm/arch-ixp2000/platform.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/platform.h
- *
- * Various bits of code used by platform-level code.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista Software, Inc. 
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned long ixp2000_reg_read(volatile void *reg)
-{
-	return *((volatile unsigned long *)reg);
-}
-
-static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
-{
-	*((volatile unsigned long *)reg) = val;
-}
-
-/*
- * On the IXP2400, we can't use XCB=000 due to chip bugs.  We use
- * XCB=101 instead, but that makes all I/O accesses bufferable.  This
- * is not a problem in general, but we do have to be slightly more
- * careful because I/O writes are no longer automatically flushed out
- * of the write buffer.
- *
- * In cases where we want to make sure that a write has been flushed
- * out of the write buffer before we proceed, for example when masking
- * a device interrupt before re-enabling IRQs in CPSR, we can use this
- * function, ixp2000_reg_wrb, which performs a write, a readback, and
- * issues a dummy instruction dependent on the value of the readback
- * (mov rX, rX) to make sure that the readback has completed before we
- * continue.
- */
-static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
-{
-	unsigned long dummy;
-
-	*((volatile unsigned long *)reg) = val;
-
-	dummy = *((volatile unsigned long *)reg);
-	__asm__ __volatile__("mov %0, %0" : "+r" (dummy));
-}
-
-/*
- * Boards may multiplex different devices on the 2nd channel of 
- * the slowport interface that each need different configuration 
- * settings.  For example, the IXDP2400 uses channel 2 on the interface 
- * to access the CPLD, the switch fabric card, and the media card.  Each
- * one needs a different mode so drivers must save/restore the mode 
- * before and after each operation.  
- *
- * acquire_slowport(&your_config);
- * ...
- * do slowport operations
- * ...
- * release_slowport();
- *
- * Note that while you have the slowport, you are holding a spinlock,
- * so your code should be written as if you explicitly acquired a lock.
- *
- * The configuration only affects device 2 on the slowport, so the
- * MTD map driver does not acquire/release the slowport.  
- */
-struct slowport_cfg {
-	unsigned long CCR;	/* Clock divide */
-	unsigned long WTC;	/* Write Timing Control */
-	unsigned long RTC;	/* Read Timing Control */
-	unsigned long PCR;	/* Protocol Control Register */
-	unsigned long ADC;	/* Address/Data Width Control */
-};
-
-
-void ixp2000_acquire_slowport(struct slowport_cfg *, struct slowport_cfg *);
-void ixp2000_release_slowport(struct slowport_cfg *);
-
-/*
- * IXP2400 A0/A1 and  IXP2800 A0/A1/A2 have broken slowport that requires
- * tweaking of addresses in the MTD driver.
- */
-static inline unsigned ixp2000_has_broken_slowport(void)
-{
-	unsigned long id = *IXP2000_PRODUCT_ID;
-	unsigned long id_prod = id & (IXP2000_MAJ_PROD_TYPE_MASK |
-				      IXP2000_MIN_PROD_TYPE_MASK);
-	return (((id_prod ==
-		  /* fixed in IXP2400-B0 */
-		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
-		   IXP2000_MIN_PROD_TYPE_IXP2400)) &&
-		 ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
-		((id_prod ==
-		  /* fixed in IXP2800-B0 */
-		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
-		   IXP2000_MIN_PROD_TYPE_IXP2800)) &&
-		 ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
-		((id_prod ==
-		  /* fixed in IXP2850-B0 */
-		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
-		   IXP2000_MIN_PROD_TYPE_IXP2850)) &&
-		 ((id & IXP2000_MAJ_REV_MASK) == 0)));
-}
-
-static inline unsigned int ixp2000_has_flash(void)
-{
-	return ((*IXP2000_STRAP_OPTIONS) & (CFG_BOOT_PROM));
-}
-
-static inline unsigned int ixp2000_is_pcimaster(void)
-{
-	return ((*IXP2000_STRAP_OPTIONS) & (CFG_PCI_BOOT_HOST));
-}
-
-void ixp2000_map_io(void);
-void ixp2000_uart_init(void);
-void ixp2000_init_irq(void);
-void ixp2000_init_time(unsigned long);
-unsigned long ixp2000_gettimeoffset(void);
-
-struct pci_sys_data;
-
-u32 *ixp2000_pci_config_addr(unsigned int bus, unsigned int devfn, int where);
-void ixp2000_pci_preinit(void);
-int ixp2000_pci_setup(int, struct pci_sys_data*);
-struct pci_bus* ixp2000_pci_scan_bus(int, struct pci_sys_data*);
-int ixp2000_pci_read_config(struct pci_bus*, unsigned int, int, int, u32 *);
-int ixp2000_pci_write_config(struct pci_bus*, unsigned int, int, int, u32);
-
-/*
- * Several of the IXP2000 systems have banked flash so we need to extend the
- * flash_platform_data structure with some private pointers
- */
-struct ixp2000_flash_data {
-	struct flash_platform_data *platform_data;
-	int nr_banks;
-	unsigned long (*bank_setup)(unsigned long);
-};
-
-struct ixp2000_i2c_pins {
-	unsigned long sda_pin;
-	unsigned long scl_pin;
-};
-
-
-#endif /*  !__ASSEMBLY__ */
diff --git a/include/asm-arm/arch-ixp2000/system.h b/include/asm-arm/arch-ixp2000/system.h
deleted file mode 100644
index 8731dd3..0000000
--- a/include/asm-arm/arch-ixp2000/system.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/system.h
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyricht (C) 2003-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/arch/hardware.h>
-#include <asm/mach-types.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	local_irq_disable();
-
-	/*
-	 * Reset flash banking register so that we are pointing at
-	 * RedBoot bank.
-	 */
-	if (machine_is_ixdp2401()) {
-		ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
-					((0 >> IXDP2X01_FLASH_WINDOW_BITS)
-						| IXDP2X01_CPLD_FLASH_INTERN));
-		ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff);
-	}
-
-	/*
-	 * On IXDP2801 we need to write this magic sequence to the CPLD
-	 * to cause a complete reset of the CPU and all external devices
-	 * and move the flash bank register back to 0.
-	 */
-	if (machine_is_ixdp2801() || machine_is_ixdp28x5()) {
-		unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
-
-		reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
-		ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg);
-		ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000);
-	}
-
-	ixp2000_reg_wrb(IXP2000_RESET0, RSTALL);
-}
diff --git a/include/asm-arm/arch-ixp2000/timex.h b/include/asm-arm/arch-ixp2000/timex.h
deleted file mode 100644
index b78a183..0000000
--- a/include/asm-arm/arch-ixp2000/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/timex.h
- *
- * IXP2000 architecture timex specifications
- */
-
-
-/*
- * Default clock is 50MHz APB, but platform code can override this
- */
-#define CLOCK_TICK_RATE	50000000
-
-
diff --git a/include/asm-arm/arch-ixp2000/uncompress.h b/include/asm-arm/arch-ixp2000/uncompress.h
deleted file mode 100644
index f66b408..0000000
--- a/include/asm-arm/arch-ixp2000/uncompress.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/uncompress.h
- *
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2002 Intel Corp.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#include <linux/serial_reg.h>
-
-#define UART_BASE	0xc0030000
-
-#define PHYS(x)          ((volatile unsigned long *)(UART_BASE + x))
-
-#define UARTDR          PHYS(0x00)      /* Transmit reg dlab=0 */
-#define UARTDLL         PHYS(0x00)      /* Divisor Latch reg dlab=1*/
-#define UARTDLM         PHYS(0x04)      /* Divisor Latch reg dlab=1*/
-#define UARTIER         PHYS(0x04)      /* Interrupt enable reg */
-#define UARTFCR         PHYS(0x08)      /* FIFO control reg dlab =0*/
-#define UARTLCR         PHYS(0x0c)      /* Control reg */
-#define UARTSR          PHYS(0x14)      /* Status reg */
-
-
-static inline void putc(int c)
-{
-	int j = 0x1000;
-
-	while (--j && !(*UARTSR & UART_LSR_THRE))
-		barrier();
-
-	*UARTDR = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-ixp2000/vmalloc.h b/include/asm-arm/arch-ixp2000/vmalloc.h
deleted file mode 100644
index 2751369..0000000
--- a/include/asm-arm/arch-ixp2000/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/vmalloc.h
- *
- * Author: Naeem Afzal <naeem.m.afzal@intel.com>
- *
- * Copyright 2002 Intel Corp.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts.  That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_END	    0xfb000000
diff --git a/include/asm-arm/arch-ixp23xx/debug-macro.S b/include/asm-arm/arch-ixp23xx/debug-macro.S
deleted file mode 100644
index 2b25e64..0000000
--- a/include/asm-arm/arch-ixp23xx/debug-macro.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/arch/ixp23xx.h>
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1				@ mmu enabled?
-		ldreq	\rx, =IXP23XX_PERIPHERAL_PHYS 	@ physical
-		ldrne	\rx, =IXP23XX_PERIPHERAL_VIRT	@ virtual
-#ifdef __ARMEB__
-		orr	\rx, \rx, #0x00000003
-#endif
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ixp23xx/dma.h b/include/asm-arm/arch-ixp23xx/dma.h
deleted file mode 100644
index 2f4335e..0000000
--- a/include/asm-arm/arch-ixp23xx/dma.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/dma.h
- */
diff --git a/include/asm-arm/arch-ixp23xx/entry-macro.S b/include/asm-arm/arch-ixp23xx/entry-macro.S
deleted file mode 100644
index ec9dd6f..0000000
--- a/include/asm-arm/arch-ixp23xx/entry-macro.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/entry-macro.S
- */
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET)
-		ldr	\irqnr, [\irqnr]	@ get interrupt number
-		cmp	\irqnr, #0x0		@ spurious interrupt ?
-		movne	\irqnr, \irqnr, lsr #2	@ skip unwanted low order bits
-		subne	\irqnr, \irqnr, #1	@ convert to 0 based
-
-#if 0
-		cmp	\irqnr, #IRQ_IXP23XX_PCI_INT_RPH
-		bne	1001f
-		mov	\irqnr, #IRQ_IXP23XX_INTA
-
-		ldr	\irqnr, =0xf5000030
-
-		mov	\tmp, #(1<<26)
-		tst	\irqnr, \tmp
-		movne	\irqnr, #IRQ_IXP23XX_INTB
-
-		mov	\tmp, #(1<<27)
-		tst	\irqnr, \tmp
-		movne	\irqnr, #IRQ_IXP23XX_INTA
-1001:
-#endif
-		.endm
diff --git a/include/asm-arm/arch-ixp23xx/hardware.h b/include/asm-arm/arch-ixp23xx/hardware.h
deleted file mode 100644
index c0010d2..0000000
--- a/include/asm-arm/arch-ixp23xx/hardware.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/hardware.h
- *
- * Copyright (C) 2002-2004 Intel Corporation.
- * Copyricht (C) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Hardware definitions for IXP23XX based systems
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/* PCI IO info */
-#define PCIO_BASE		IXP23XX_PCI_IO_VIRT
-#define PCIBIOS_MIN_IO		0x00000000
-#define PCIBIOS_MIN_MEM		0xe0000000
-
-#include "ixp23xx.h"
-
-#define pcibios_assign_all_busses()	0
-
-/*
- * Platform helper functions
- */
-#include "platform.h"
-
-/*
- * Platform-specific headers
- */
-#include "ixdp2351.h"
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/io.h b/include/asm-arm/arch-ixp23xx/io.h
deleted file mode 100644
index 66f5baf..0000000
--- a/include/asm-arm/arch-ixp23xx/io.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/io.h
- *
- * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2003-2005 Intel Corp.
- * Copyright (C) 2005 MontaVista Software, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(p)		((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT))
-#define __mem_pci(a)	(a)
-
-#include <linux/kernel.h>	/* For BUG */
-
-static inline void __iomem *
-ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned int mtype)
-{
-	if (addr >= IXP23XX_PCI_MEM_START &&
-		addr <= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) {
-		if (addr + size > IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE)
-			return NULL;
-
-		return (void __iomem *)
- 			((addr - IXP23XX_PCI_MEM_START) + IXP23XX_PCI_MEM_VIRT);
-	}
-
-	return __arm_ioremap(addr, size, mtype);
-}
-
-static inline void
-ixp23xx_iounmap(void __iomem *addr)
-{
-	if ((((u32)addr) >= IXP23XX_PCI_MEM_VIRT) &&
-	    (((u32)addr) < IXP23XX_PCI_MEM_VIRT + IXP23XX_PCI_MEM_SIZE))
-		return;
-
-	__iounmap(addr);
-}
-
-#define __arch_ioremap(a,s,f)	ixp23xx_ioremap(a,s,f)
-#define __arch_iounmap(a)	ixp23xx_iounmap(a)
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/irqs.h b/include/asm-arm/arch-ixp23xx/irqs.h
deleted file mode 100644
index 27c58089..0000000
--- a/include/asm-arm/arch-ixp23xx/irqs.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/irqs.h
- *
- * IRQ definitions for IXP23XX based systems
- *
- * Author: Naeem Afzal <naeem.m.afzal@intel.com>
- *
- * Copyright (C) 2003-2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define NR_IXP23XX_IRQS			IRQ_IXP23XX_INTB+1
-#define IRQ_IXP23XX_EXTIRQS		NR_IXP23XX_IRQS
-
-
-#define IRQ_IXP23XX_DBG0		0	/* Debug/Execution/MBox */
-#define IRQ_IXP23XX_DBG1		1	/* Debug/Execution/MBox */
-#define IRQ_IXP23XX_NPE_TRG		2	/* npe_trigger */
-#define IRQ_IXP23XX_TIMER1		3	/* Timer[0] */
-#define IRQ_IXP23XX_TIMER2		4	/* Timer[1] */
-#define IRQ_IXP23XX_TIMESTAMP		5	/* Timer[2], Time-stamp */
-#define IRQ_IXP23XX_WDOG		6	/* Time[3], Watchdog Timer */
-#define IRQ_IXP23XX_PCI_DBELL		7	/* PCI Doorbell */
-#define IRQ_IXP23XX_PCI_DMA1		8	/* PCI DMA Channel 1 */
-#define IRQ_IXP23XX_PCI_DMA2		9	/* PCI DMA Channel 2 */
-#define IRQ_IXP23XX_PCI_DMA3		10	/* PCI DMA Channel 3 */
-#define IRQ_IXP23XX_PCI_INT_RPH		11	/* pcxg_pci_int_rph */
-#define IRQ_IXP23XX_CPP_PMU		12	/* xpxg_pm_int_rpl */
-#define IRQ_IXP23XX_SWINT0		13	/* S/W Interrupt0 */
-#define IRQ_IXP23XX_SWINT1		14	/* S/W Interrupt1 */
-#define IRQ_IXP23XX_UART2		15	/* UART1 Interrupt */
-#define IRQ_IXP23XX_UART1		16	/* UART0 Interrupt */
-#define IRQ_IXP23XX_XSI_PMU_ROLLOVER	17	/* AHB Performance M. Unit counter rollover */
-#define IRQ_IXP23XX_XSI_AHB_PM0		18	/* intr_pm_o */
-#define IRQ_IXP23XX_XSI_AHB_ECE0	19	/* intr_ece_o */
-#define IRQ_IXP23XX_XSI_AHB_GASKET	20	/* gas_intr_o */
-#define IRQ_IXP23XX_XSI_CPP		21	/* xsi2cpp_int */
-#define IRQ_IXP23XX_CPP_XSI		22	/* cpp2xsi_int */
-#define IRQ_IXP23XX_ME_ATTN0		23	/* ME_ATTN */
-#define IRQ_IXP23XX_ME_ATTN1		24	/* ME_ATTN */
-#define IRQ_IXP23XX_ME_ATTN2		25	/* ME_ATTN */
-#define IRQ_IXP23XX_ME_ATTN3		26	/* ME_ATTN */
-#define IRQ_IXP23XX_PCI_ERR_RPH		27	/* PCXG_PCI_ERR_RPH */
-#define IRQ_IXP23XX_D0XG_ECC_CORR	28	/* D0XG_DRAM_ECC_CORR */
-#define IRQ_IXP23XX_D0XG_ECC_UNCORR	29	/* D0XG_DRAM_ECC_UNCORR */
-#define IRQ_IXP23XX_SRAM_ERR1		30	/* SRAM1_ERR */
-#define IRQ_IXP23XX_SRAM_ERR0		31	/* SRAM0_ERR */
-#define IRQ_IXP23XX_MEDIA_ERR		32	/* MEDIA_ERR */
-#define IRQ_IXP23XX_STH_DRAM_ECC_MAJ	33	/* STH_DRAM0_ECC_MAJ */
-#define IRQ_IXP23XX_GPIO6		34	/* GPIO0 interrupts */
-#define IRQ_IXP23XX_GPIO7		35	/* GPIO1 interrupts */
-#define IRQ_IXP23XX_GPIO8		36	/* GPIO2 interrupts */
-#define IRQ_IXP23XX_GPIO9		37	/* GPIO3 interrupts */
-#define IRQ_IXP23XX_GPIO10		38	/* GPIO4 interrupts */
-#define IRQ_IXP23XX_GPIO11		39	/* GPIO5 interrupts */
-#define IRQ_IXP23XX_GPIO12		40	/* GPIO6 interrupts */
-#define IRQ_IXP23XX_GPIO13		41	/* GPIO7 interrupts */
-#define IRQ_IXP23XX_GPIO14		42	/* GPIO8 interrupts */
-#define IRQ_IXP23XX_GPIO15		43	/* GPIO9 interrupts */
-#define IRQ_IXP23XX_SHAC_RING0		44	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING1		45	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING2		46	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING3		47	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING4		48	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING5		49	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING6		50	/* SHAC RING Full */
-#define IRQ_IXP23XX_SHAC_RING7		51	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING8		52	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING9		53	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING10		54	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING11		55	/* SHAC Ring Full */
-#define IRQ_IXP23XX_ME_THREAD_A0_ME0	56	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A1_ME0	57	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A2_ME0	58	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A3_ME0	59	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A4_ME0	60	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A5_ME0	61	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A6_ME0	62	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A7_ME0	63	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A8_ME1	64	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A9_ME1	65	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A10_ME1	66	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A11_ME1	67	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A12_ME1	68	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A13_ME1	69	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A14_ME1	70	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A15_ME1	71	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A16_ME2	72	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A17_ME2	73	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A18_ME2	74	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A19_ME2	75	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A20_ME2	76	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A21_ME2	77	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A22_ME2	78	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A23_ME2	79	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A24_ME3	80	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A25_ME3	81	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A26_ME3	82	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A27_ME3	83	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A28_ME3	84	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A29_ME3	85	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A30_ME3	86	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A31_ME3	87	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_B0_ME0	88	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B1_ME0	89	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B2_ME0	90	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B3_ME0	91	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B4_ME0	92	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B5_ME0	93	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B6_ME0	94	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B7_ME0	95	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B8_ME1	96	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B9_ME1	97	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B10_ME1	98	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B11_ME1	99	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B12_ME1	100	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B13_ME1	101	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B14_ME1	102	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B15_ME1	103	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B16_ME2	104	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B17_ME2	105	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B18_ME2	106	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B19_ME2	107	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B20_ME2	108	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B21_ME2	109	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B22_ME2	110	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B23_ME2	111	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B24_ME3	112	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B25_ME3	113	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B26_ME3	114	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B27_ME3	115	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B28_ME3	116	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B29_ME3	117	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B30_ME3	118	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B31_ME3	119	/* ME_THREAD_B */
-
-#define NUM_IXP23XX_RAW_IRQS		120
-
-#define IRQ_IXP23XX_INTA		120	/* Indirect pcxg_pci_int_rph */
-#define IRQ_IXP23XX_INTB		121	/* Indirect pcxg_pci_int_rph */
-
-#define NR_IXP23XX_IRQ			(IRQ_IXP23XX_INTB + 1)
-
-/*
- * We default to 32 per-board IRQs. Increase this number if you need
- * more, but keep it realistic.
- */
-#define NR_IXP23XX_MACH_IRQS 		32
-
-#define NR_IRQS				(NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS)
-
-#define IXP23XX_MACH_IRQ(irq) 		(NR_IXP23XX_IRQ + (irq))
-
-
-/*
- * IXDP2351-specific interrupts
- */
-
-/*
- * External PCI interrupts signaled through INTB
- *
- */
-#define IXDP2351_INTB_IRQ_BASE 		0
-#define IRQ_IXDP2351_INTA_82546		IXP23XX_MACH_IRQ(0)
-#define IRQ_IXDP2351_INTB_82546		IXP23XX_MACH_IRQ(1)
-#define IRQ_IXDP2351_SPCI_DB_0		IXP23XX_MACH_IRQ(2)
-#define IRQ_IXDP2351_SPCI_DB_1		IXP23XX_MACH_IRQ(3)
-#define IRQ_IXDP2351_SPCI_PMC_INTA	IXP23XX_MACH_IRQ(4)
-#define IRQ_IXDP2351_SPCI_PMC_INTB	IXP23XX_MACH_IRQ(5)
-#define IRQ_IXDP2351_SPCI_PMC_INTC	IXP23XX_MACH_IRQ(6)
-#define IRQ_IXDP2351_SPCI_PMC_INTD	IXP23XX_MACH_IRQ(7)
-#define IRQ_IXDP2351_SPCI_FIC		IXP23XX_MACH_IRQ(8)
-
-#define IXDP2351_INTB_IRQ_BIT(irq)	(irq - IXP23XX_MACH_IRQ(0))
-#define IXDP2351_INTB_IRQ_MASK(irq)	(1 << IXDP2351_INTB_IRQ_BIT(irq))
-#define IXDP2351_INTB_IRQ_VALID		0x01FF
-#define IXDP2351_INTB_IRQ_NUM 		16
-
-/*
- * Other external interrupts signaled through INTA
- */
-#define IXDP2351_INTA_IRQ_BASE 		16
-#define IRQ_IXDP2351_IPMI_FROM		IXP23XX_MACH_IRQ(16)
-#define IRQ_IXDP2351_125US		IXP23XX_MACH_IRQ(17)
-#define IRQ_IXDP2351_DB_0_ADD		IXP23XX_MACH_IRQ(18)
-#define IRQ_IXDP2351_DB_1_ADD		IXP23XX_MACH_IRQ(19)
-#define IRQ_IXDP2351_DEBUG1		IXP23XX_MACH_IRQ(20)
-#define IRQ_IXDP2351_ADD_UART		IXP23XX_MACH_IRQ(21)
-#define IRQ_IXDP2351_FIC_ADD		IXP23XX_MACH_IRQ(24)
-#define IRQ_IXDP2351_CS8900		IXP23XX_MACH_IRQ(25)
-#define IRQ_IXDP2351_BBSRAM		IXP23XX_MACH_IRQ(26)
-#define IRQ_IXDP2351_CONFIG_MEDIA	IXP23XX_MACH_IRQ(27)
-#define IRQ_IXDP2351_CLOCK_REF		IXP23XX_MACH_IRQ(28)
-#define IRQ_IXDP2351_A10_NP		IXP23XX_MACH_IRQ(29)
-#define IRQ_IXDP2351_A11_NP		IXP23XX_MACH_IRQ(30)
-#define IRQ_IXDP2351_DEBUG_NP		IXP23XX_MACH_IRQ(31)
-
-#define IXDP2351_INTA_IRQ_BIT(irq) 	(irq - IXP23XX_MACH_IRQ(16))
-#define IXDP2351_INTA_IRQ_MASK(irq) 	(1 << IXDP2351_INTA_IRQ_BIT(irq))
-#define IXDP2351_INTA_IRQ_VALID 	0xFF3F
-#define IXDP2351_INTA_IRQ_NUM 		16
-
-
-/*
- * ADI RoadRunner IRQs
- */
-#define IRQ_ROADRUNNER_PCI_INTA 	IRQ_IXP23XX_INTA
-#define IRQ_ROADRUNNER_PCI_INTB 	IRQ_IXP23XX_INTB
-#define IRQ_ROADRUNNER_PCI_INTC 	IRQ_IXP23XX_GPIO11
-#define IRQ_ROADRUNNER_PCI_INTD 	IRQ_IXP23XX_GPIO12
-
-/*
- * Put new board definitions here
- */
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/ixdp2351.h b/include/asm-arm/arch-ixp23xx/ixdp2351.h
deleted file mode 100644
index d5e8a43..0000000
--- a/include/asm-arm/arch-ixp23xx/ixdp2351.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/ixdp2351.h
- *
- * Register and other defines for IXDP2351
- *
- * Copyright (c) 2002-2004 Intel Corp.
- * Copytight (c) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_IXDP2351_H
-#define __ASM_ARCH_IXDP2351_H
-
-/*
- * NP module memory map
- */
-#define IXDP2351_NP_PHYS_BASE		(IXP23XX_EXP_BUS_CS4_BASE)
-#define IXDP2351_NP_PHYS_SIZE		0x00100000
-#define IXDP2351_NP_VIRT_BASE		0xeff00000
-
-#define IXDP2351_VIRT_CS8900_BASE	(IXDP2351_NP_VIRT_BASE)
-#define IXDP2351_VIRT_CS8900_END	(IXDP2351_VIRT_CS8900_BASE + 16)
-
-#define IXDP2351_VIRT_NP_CPLD_BASE 	(IXP23XX_EXP_BUS_CS4_BASE_VIRT + 0x00010000)
-
-#define IXDP2351_NP_CPLD_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_NP_CPLD_BASE + reg))
-
-#define IXDP2351_NP_CPLD_RESET1_REG	IXDP2351_NP_CPLD_REG(0x00)
-#define IXDP2351_NP_CPLD_LED_REG	IXDP2351_NP_CPLD_REG(0x02)
-#define IXDP2351_NP_CPLD_VERSION_REG	IXDP2351_NP_CPLD_REG(0x04)
-
-/*
- * Base board module memory map
- */
-
-#define IXDP2351_BB_BASE_PHYS		(IXP23XX_EXP_BUS_CS5_BASE)
-#define IXDP2351_BB_SIZE		0x01000000
-#define IXDP2351_BB_BASE_VIRT		(0xee000000)
-
-#define IXDP2351_BB_AREA_BASE(offset)	(IXDP2351_BB_BASE_VIRT + offset)
-
-#define IXDP2351_VIRT_NVRAM_BASE	IXDP2351_BB_AREA_BASE(0x0)
-#define IXDP2351_NVRAM_SIZE		(0x20000)
-
-#define IXDP2351_VIRT_MB_IXF1104_BASE	IXDP2351_BB_AREA_BASE(0x00020000)
-#define IXDP2351_VIRT_ADD_UART_BASE	IXDP2351_BB_AREA_BASE(0x000240C0)
-#define IXDP2351_VIRT_FIC_BASE		IXDP2351_BB_AREA_BASE(0x00200000)
-#define IXDP2351_VIRT_DB0_BASE		IXDP2351_BB_AREA_BASE(0x00400000)
-#define IXDP2351_VIRT_DB1_BASE		IXDP2351_BB_AREA_BASE(0x00600000)
-#define IXDP2351_VIRT_CPLD_BASE		IXDP2351_BB_AREA_BASE(0x00024000)
-
-/*
- * On board CPLD registers
- */
-#define IXDP2351_CPLD_BB_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_CPLD_BASE + reg))
-
-#define IXDP2351_CPLD_RESET0_REG	IXDP2351_CPLD_BB_REG(0x00)
-#define IXDP2351_CPLD_RESET1_REG	IXDP2351_CPLD_BB_REG(0x04)
-
-#define IXDP2351_CPLD_RESET1_MAGIC 	0x55AA
-#define IXDP2351_CPLD_RESET1_ENABLE 	0x8000
-
-#define IXDP2351_CPLD_FPGA_CONFIG_REG	IXDP2351_CPLD_BB_REG(0x08)
-#define IXDP2351_CPLD_INTB_MASK_SET_REG	IXDP2351_CPLD_BB_REG(0x10)
-#define IXDP2351_CPLD_INTA_MASK_SET_REG	IXDP2351_CPLD_BB_REG(0x14)
-#define IXDP2351_CPLD_INTB_STAT_REG	IXDP2351_CPLD_BB_REG(0x18)
-#define IXDP2351_CPLD_INTA_STAT_REG	IXDP2351_CPLD_BB_REG(0x1C)
-#define IXDP2351_CPLD_INTB_RAW_REG	IXDP2351_CPLD_BB_REG(0x20)	/* read */
-#define IXDP2351_CPLD_INTA_RAW_REG	IXDP2351_CPLD_BB_REG(0x24)	/* read */
-#define IXDP2351_CPLD_INTB_MASK_CLR_REG	IXDP2351_CPLD_INTB_RAW_REG	/* write */
-#define IXDP2351_CPLD_INTA_MASK_CLR_REG	IXDP2351_CPLD_INTA_RAW_REG	/* write */
-#define IXDP2351_CPLD_INTB_SIM_REG	IXDP2351_CPLD_BB_REG(0x28)
-#define IXDP2351_CPLD_INTA_SIM_REG	IXDP2351_CPLD_BB_REG(0x2C)
-	/* Interrupt bits are defined in irqs.h */
-#define IXDP2351_CPLD_BB_GBE0_REG	IXDP2351_CPLD_BB_REG(0x30)
-#define IXDP2351_CPLD_BB_GBE1_REG	IXDP2351_CPLD_BB_REG(0x34)
-
-/* #define IXDP2351_CPLD_BB_MISC_REG	IXDP2351_CPLD_REG(0x1C) */
-/* #define IXDP2351_CPLD_BB_MISC_REV_MASK	0xFF		*/
-/* #define IXDP2351_CPLD_BB_GDXCS0_REG	IXDP2351_CPLD_REG(0x24) */
-/* #define IXDP2351_CPLD_BB_GDXCS1_REG	IXDP2351_CPLD_REG(0x28) */
-/* #define IXDP2351_CPLD_BB_CLOCK_REG	IXDP2351_CPLD_REG(0x04) */
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/ixp23xx.h b/include/asm-arm/arch-ixp23xx/ixp23xx.h
deleted file mode 100644
index 3927b1d..0000000
--- a/include/asm-arm/arch-ixp23xx/ixp23xx.h
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/ixp23xx.h
- *
- * Register definitions for IXP23XX
- *
- * Copyright (C) 2003-2005 Intel Corporation.
- * Copyright (C) 2005 MontaVista Software, Inc.
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IXP23XX_H
-#define __ASM_ARCH_IXP23XX_H
-
-/*
- * IXP2300 linux memory map:
- *
- * virt		phys		size
- * fffd0000	a0000000	64K		XSI2CPP_CSR
- * fffc0000	c4000000	4K		EXP_CFG
- * fff00000	c8000000	64K		PERIPHERAL
- * fe000000	1c0000000	16M		CAP_CSR
- * fd000000	1c8000000	16M		MSF_CSR
- * fb000000			16M		---
- * fa000000	1d8000000	32M		PCI_IO
- * f8000000	1da000000	32M		PCI_CFG
- * f6000000	1de000000	32M		PCI_CREG
- * f4000000			32M		---
- * f0000000	1e0000000	64M		PCI_MEM
- * e[c-f]000000					per-platform mappings
- */
-
-
-/****************************************************************************
- * Static mappings.
- ****************************************************************************/
-#define IXP23XX_XSI2CPP_CSR_PHYS	0xa0000000
-#define IXP23XX_XSI2CPP_CSR_VIRT	0xfffd0000
-#define IXP23XX_XSI2CPP_CSR_SIZE	0x00010000
-
-#define IXP23XX_EXP_CFG_PHYS		0xc4000000
-#define IXP23XX_EXP_CFG_VIRT		0xfffc0000
-#define IXP23XX_EXP_CFG_SIZE		0x00001000
-
-#define IXP23XX_PERIPHERAL_PHYS		0xc8000000
-#define IXP23XX_PERIPHERAL_VIRT		0xfff00000
-#define IXP23XX_PERIPHERAL_SIZE		0x00010000
-
-#define IXP23XX_CAP_CSR_PHYS		0x1c0000000ULL
-#define IXP23XX_CAP_CSR_VIRT		0xfe000000
-#define IXP23XX_CAP_CSR_SIZE		0x01000000
-
-#define IXP23XX_MSF_CSR_PHYS		0x1c8000000ULL
-#define IXP23XX_MSF_CSR_VIRT		0xfd000000
-#define IXP23XX_MSF_CSR_SIZE		0x01000000
-
-#define IXP23XX_PCI_IO_PHYS		0x1d8000000ULL
-#define IXP23XX_PCI_IO_VIRT		0xfa000000
-#define IXP23XX_PCI_IO_SIZE		0x02000000
-
-#define IXP23XX_PCI_CFG_PHYS		0x1da000000ULL
-#define IXP23XX_PCI_CFG_VIRT		0xf8000000
-#define IXP23XX_PCI_CFG_SIZE		0x02000000
-#define IXP23XX_PCI_CFG0_VIRT		IXP23XX_PCI_CFG_VIRT
-#define IXP23XX_PCI_CFG1_VIRT		(IXP23XX_PCI_CFG_VIRT + 0x01000000)
-
-#define IXP23XX_PCI_CREG_PHYS		0x1de000000ULL
-#define IXP23XX_PCI_CREG_VIRT		0xf6000000
-#define IXP23XX_PCI_CREG_SIZE		0x02000000
-#define IXP23XX_PCI_CSR_VIRT		(IXP23XX_PCI_CREG_VIRT + 0x01000000)
-
-#define IXP23XX_PCI_MEM_START		0xe0000000
-#define IXP23XX_PCI_MEM_PHYS		0x1e0000000ULL
-#define IXP23XX_PCI_MEM_VIRT		0xf0000000
-#define IXP23XX_PCI_MEM_SIZE		0x04000000
-
-
-/****************************************************************************
- * XSI2CPP CSRs.
- ****************************************************************************/
-#define IXP23XX_XSI2CPP_REG(x)		((volatile unsigned long *)(IXP23XX_XSI2CPP_CSR_VIRT + (x)))
-#define IXP23XX_CPP2XSI_CURR_XFER_REG3	IXP23XX_XSI2CPP_REG(0xf8)
-#define IXP23XX_CPP2XSI_ADDR_31		(1 << 19)
-#define IXP23XX_CPP2XSI_PSH_OFF		(1 << 20)
-#define IXP23XX_CPP2XSI_COH_OFF		(1 << 21)
-
-
-/****************************************************************************
- * Expansion Bus Config.
- ****************************************************************************/
-#define IXP23XX_EXP_CFG_REG(x)		((volatile unsigned long *)(IXP23XX_EXP_CFG_VIRT + (x)))
-#define IXP23XX_EXP_CS0			IXP23XX_EXP_CFG_REG(0x00)
-#define IXP23XX_EXP_CS1			IXP23XX_EXP_CFG_REG(0x04)
-#define IXP23XX_EXP_CS2			IXP23XX_EXP_CFG_REG(0x08)
-#define IXP23XX_EXP_CS3			IXP23XX_EXP_CFG_REG(0x0c)
-#define IXP23XX_EXP_CS4			IXP23XX_EXP_CFG_REG(0x10)
-#define IXP23XX_EXP_CS5			IXP23XX_EXP_CFG_REG(0x14)
-#define IXP23XX_EXP_CS6			IXP23XX_EXP_CFG_REG(0x18)
-#define IXP23XX_EXP_CS7			IXP23XX_EXP_CFG_REG(0x1c)
-#define IXP23XX_FLASH_WRITABLE		(0x2)
-#define IXP23XX_FLASH_BUS8		(0x1)
-
-#define IXP23XX_EXP_CFG0		IXP23XX_EXP_CFG_REG(0x20)
-#define IXP23XX_EXP_CFG1		IXP23XX_EXP_CFG_REG(0x24)
-#define IXP23XX_EXP_CFG0_MEM_MAP		(1 << 31)
-#define IXP23XX_EXP_CFG0_XSCALE_SPEED_SEL 	(3 << 22)
-#define IXP23XX_EXP_CFG0_XSCALE_SPEED_EN	(1 << 21)
-#define IXP23XX_EXP_CFG0_CPP_SPEED_SEL		(3 << 19)
-#define IXP23XX_EXP_CFG0_CPP_SPEED_EN		(1 << 18)
-#define IXP23XX_EXP_CFG0_PCI_SWIN		(3 << 16)
-#define IXP23XX_EXP_CFG0_PCI_DWIN		(3 << 14)
-#define IXP23XX_EXP_CFG0_PCI33_MODE		(1 << 13)
-#define IXP23XX_EXP_CFG0_QDR_SPEED_SEL		(1 << 12)
-#define IXP23XX_EXP_CFG0_CPP_DIV_SEL		(1 << 5)
-#define IXP23XX_EXP_CFG0_XSI_NOT_PRES		(1 << 4)
-#define IXP23XX_EXP_CFG0_PROM_BOOT		(1 << 3)
-#define IXP23XX_EXP_CFG0_PCI_ARB		(1 << 2)
-#define IXP23XX_EXP_CFG0_PCI_HOST		(1 << 1)
-#define IXP23XX_EXP_CFG0_FLASH_WIDTH		(1 << 0)
-
-#define IXP23XX_EXP_UNIT_FUSE		IXP23XX_EXP_CFG_REG(0x28)
-#define IXP23XX_EXP_MSF_MUX		IXP23XX_EXP_CFG_REG(0x30)
-#define IXP23XX_EXP_CFG_FUSE		IXP23XX_EXP_CFG_REG(0x34)
-
-#define IXP23XX_EXP_BUS_PHYS		0x90000000
-#define IXP23XX_EXP_BUS_WINDOW_SIZE	0x01000000
-
-#define IXP23XX_EXP_BUS_CS0_BASE	(IXP23XX_EXP_BUS_PHYS + 0x00000000)
-#define IXP23XX_EXP_BUS_CS1_BASE	(IXP23XX_EXP_BUS_PHYS + 0x01000000)
-#define IXP23XX_EXP_BUS_CS2_BASE	(IXP23XX_EXP_BUS_PHYS + 0x02000000)
-#define IXP23XX_EXP_BUS_CS3_BASE	(IXP23XX_EXP_BUS_PHYS + 0x03000000)
-#define IXP23XX_EXP_BUS_CS4_BASE	(IXP23XX_EXP_BUS_PHYS + 0x04000000)
-#define IXP23XX_EXP_BUS_CS5_BASE	(IXP23XX_EXP_BUS_PHYS + 0x05000000)
-#define IXP23XX_EXP_BUS_CS6_BASE	(IXP23XX_EXP_BUS_PHYS + 0x06000000)
-#define IXP23XX_EXP_BUS_CS7_BASE	(IXP23XX_EXP_BUS_PHYS + 0x07000000)
-
-
-/****************************************************************************
- * Peripherals.
- ****************************************************************************/
-#define IXP23XX_UART1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x0000)
-#define IXP23XX_UART2_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x1000)
-#define IXP23XX_PMU_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x2000)
-#define IXP23XX_INTC_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x3000)
-#define IXP23XX_GPIO_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x4000)
-#define IXP23XX_TIMER_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x5000)
-#define IXP23XX_NPE0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x6000)
-#define IXP23XX_DSR_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x7000)
-#define IXP23XX_NPE1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x8000)
-#define IXP23XX_ETH0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x9000)
-#define IXP23XX_ETH1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xA000)
-#define IXP23XX_GIG0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xB000)
-#define IXP23XX_GIG1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xC000)
-#define IXP23XX_DDRS_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xD000)
-
-#define IXP23XX_UART1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x0000)
-#define IXP23XX_UART2_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x1000)
-#define IXP23XX_PMU_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x2000)
-#define IXP23XX_INTC_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x3000)
-#define IXP23XX_GPIO_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x4000)
-#define IXP23XX_TIMER_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x5000)
-#define IXP23XX_NPE0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x6000)
-#define IXP23XX_DSR_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x7000)
-#define IXP23XX_NPE1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x8000)
-#define IXP23XX_ETH0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x9000)
-#define IXP23XX_ETH1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xA000)
-#define IXP23XX_GIG0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xB000)
-#define IXP23XX_GIG1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xC000)
-#define IXP23XX_DDRS_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xD000)
-
-
-/****************************************************************************
- * Interrupt controller.
- ****************************************************************************/
-#define IXP23XX_INTC_REG(x)		 ((volatile unsigned long *)(IXP23XX_INTC_VIRT + (x)))
-#define IXP23XX_INTR_ST1		IXP23XX_INTC_REG(0x00)
-#define IXP23XX_INTR_ST2		IXP23XX_INTC_REG(0x04)
-#define IXP23XX_INTR_ST3		IXP23XX_INTC_REG(0x08)
-#define IXP23XX_INTR_ST4		IXP23XX_INTC_REG(0x0c)
-#define IXP23XX_INTR_EN1		IXP23XX_INTC_REG(0x10)
-#define IXP23XX_INTR_EN2		IXP23XX_INTC_REG(0x14)
-#define IXP23XX_INTR_EN3		IXP23XX_INTC_REG(0x18)
-#define IXP23XX_INTR_EN4		IXP23XX_INTC_REG(0x1c)
-#define IXP23XX_INTR_SEL1		IXP23XX_INTC_REG(0x20)
-#define IXP23XX_INTR_SEL2		IXP23XX_INTC_REG(0x24)
-#define IXP23XX_INTR_SEL3		IXP23XX_INTC_REG(0x28)
-#define IXP23XX_INTR_SEL4		IXP23XX_INTC_REG(0x2c)
-#define IXP23XX_INTR_IRQ_ST1		IXP23XX_INTC_REG(0x30)
-#define IXP23XX_INTR_IRQ_ST2		IXP23XX_INTC_REG(0x34)
-#define IXP23XX_INTR_IRQ_ST3		IXP23XX_INTC_REG(0x38)
-#define IXP23XX_INTR_IRQ_ST4		IXP23XX_INTC_REG(0x3c)
-#define IXP23XX_INTR_IRQ_ENC_ST_OFFSET	0x54
-
-
-/****************************************************************************
- * GPIO.
- ****************************************************************************/
-#define IXP23XX_GPIO_REG(x)		((volatile unsigned long *)(IXP23XX_GPIO_VIRT + (x)))
-#define IXP23XX_GPIO_GPOUTR		IXP23XX_GPIO_REG(0x00)
-#define IXP23XX_GPIO_GPOER		IXP23XX_GPIO_REG(0x04)
-#define IXP23XX_GPIO_GPINR		IXP23XX_GPIO_REG(0x08)
-#define IXP23XX_GPIO_GPISR		IXP23XX_GPIO_REG(0x0c)
-#define IXP23XX_GPIO_GPIT1R		IXP23XX_GPIO_REG(0x10)
-#define IXP23XX_GPIO_GPIT2R		IXP23XX_GPIO_REG(0x14)
-#define IXP23XX_GPIO_GPCLKR		IXP23XX_GPIO_REG(0x18)
-#define IXP23XX_GPIO_GPDBSELR 		IXP23XX_GPIO_REG(0x1c)
-
-#define IXP23XX_GPIO_STYLE_MASK		0x7
-#define IXP23XX_GPIO_STYLE_ACTIVE_HIGH	0x0
-#define IXP23XX_GPIO_STYLE_ACTIVE_LOW	0x1
-#define IXP23XX_GPIO_STYLE_RISING_EDGE	0x2
-#define IXP23XX_GPIO_STYLE_FALLING_EDGE	0x3
-#define IXP23XX_GPIO_STYLE_TRANSITIONAL	0x4
-
-#define IXP23XX_GPIO_STYLE_SIZE		3
-
-
-/****************************************************************************
- * Timer.
- ****************************************************************************/
-#define IXP23XX_TIMER_REG(x)		((volatile unsigned long *)(IXP23XX_TIMER_VIRT + (x)))
-#define IXP23XX_TIMER_CONT		IXP23XX_TIMER_REG(0x00)
-#define IXP23XX_TIMER1_TIMESTAMP	IXP23XX_TIMER_REG(0x04)
-#define IXP23XX_TIMER1_RELOAD		IXP23XX_TIMER_REG(0x08)
-#define IXP23XX_TIMER2_TIMESTAMP	IXP23XX_TIMER_REG(0x0c)
-#define IXP23XX_TIMER2_RELOAD		IXP23XX_TIMER_REG(0x10)
-#define IXP23XX_TIMER_WDOG		IXP23XX_TIMER_REG(0x14)
-#define IXP23XX_TIMER_WDOG_EN		IXP23XX_TIMER_REG(0x18)
-#define IXP23XX_TIMER_WDOG_KEY		IXP23XX_TIMER_REG(0x1c)
-#define IXP23XX_TIMER_WDOG_KEY_MAGIC	0x482e
-#define IXP23XX_TIMER_STATUS		IXP23XX_TIMER_REG(0x20)
-#define IXP23XX_TIMER_SOFT_RESET	IXP23XX_TIMER_REG(0x24)
-#define IXP23XX_TIMER_SOFT_RESET_EN	IXP23XX_TIMER_REG(0x28)
-
-#define IXP23XX_TIMER_ENABLE		(1 << 0)
-#define IXP23XX_TIMER_ONE_SHOT		(1 << 1)
-/* Low order bits of reload value ignored */
-#define IXP23XX_TIMER_RELOAD_MASK	(0x3)
-#define IXP23XX_TIMER_DISABLED		(0x0)
-#define IXP23XX_TIMER1_INT_PEND		(1 << 0)
-#define IXP23XX_TIMER2_INT_PEND		(1 << 1)
-#define IXP23XX_TIMER_STATUS_TS_PEND	(1 << 2)
-#define IXP23XX_TIMER_STATUS_WDOG_PEND	(1 << 3)
-#define IXP23XX_TIMER_STATUS_WARM_RESET	(1 << 4)
-
-
-/****************************************************************************
- * CAP CSRs.
- ****************************************************************************/
-#define IXP23XX_GLOBAL_REG(x)		((volatile unsigned long *)(IXP23XX_CAP_CSR_VIRT + 0x4a00 + (x)))
-#define IXP23XX_PRODUCT_ID		IXP23XX_GLOBAL_REG(0x00)
-#define IXP23XX_MISC_CONTROL		IXP23XX_GLOBAL_REG(0x04)
-#define IXP23XX_MSF_CLK_CNTRL		IXP23XX_GLOBAL_REG(0x08)
-#define IXP23XX_RESET0			IXP23XX_GLOBAL_REG(0x0c)
-#define IXP23XX_RESET1			IXP23XX_GLOBAL_REG(0x10)
-#define IXP23XX_STRAP_OPTIONS		IXP23XX_GLOBAL_REG(0x18)
-
-#define IXP23XX_ENABLE_WATCHDOG		(1 << 24)
-#define IXP23XX_SHPC_INIT_COMP		(1 << 21)
-#define IXP23XX_RST_ALL			(1 << 16)
-#define IXP23XX_RESET_PCI		(1 << 2)
-#define IXP23XX_PCI_UNIT_RESET		(1 << 1)
-#define IXP23XX_XSCALE_RESET		(1 << 0)
-
-#define IXP23XX_UENGINE_CSR_VIRT_BASE	(IXP23XX_CAP_CSR_VIRT + 0x18000)
-
-
-/****************************************************************************
- * PCI CSRs.
- ****************************************************************************/
-#define IXP23XX_PCI_CREG(x)		((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + (x)))
-#define IXP23XX_PCI_CMDSTAT		IXP23XX_PCI_CREG(0x04)
-#define IXP23XX_PCI_SRAM_BAR		IXP23XX_PCI_CREG(0x14)
-#define IXP23XX_PCI_SDRAM_BAR		IXP23XX_PCI_CREG(0x18)
-
-
-#define IXP23XX_PCI_CSR(x)		((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + 0x01000000 + (x)))
-#define IXP23XX_PCI_OUT_INT_STATUS	IXP23XX_PCI_CSR(0x0030)
-#define IXP23XX_PCI_OUT_INT_MASK	IXP23XX_PCI_CSR(0x0034)
-#define IXP23XX_PCI_SRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x00fc)
-#define IXP23XX_PCI_DRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x0100)
-#define IXP23XX_PCI_CONTROL		IXP23XX_PCI_CSR(0x013c)
-#define IXP23XX_PCI_ADDR_EXT		IXP23XX_PCI_CSR(0x0140)
-#define IXP23XX_PCI_ME_PUSH_STATUS	IXP23XX_PCI_CSR(0x0148)
-#define IXP23XX_PCI_ME_PUSH_EN		IXP23XX_PCI_CSR(0x014c)
-#define IXP23XX_PCI_ERR_STATUS		IXP23XX_PCI_CSR(0x0150)
-#define IXP23XX_PCI_ERROR_STATUS	IXP23XX_PCI_CSR(0x0150)
-#define IXP23XX_PCI_ERR_ENABLE		IXP23XX_PCI_CSR(0x0154)
-#define IXP23XX_PCI_XSCALE_INT_STATUS	IXP23XX_PCI_CSR(0x0158)
-#define IXP23XX_PCI_XSCALE_INT_ENABLE	IXP23XX_PCI_CSR(0x015c)
-#define IXP23XX_PCI_CPP_ADDR_BITS	IXP23XX_PCI_CSR(0x0160)
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/memory.h b/include/asm-arm/arch-ixp23xx/memory.h
deleted file mode 100644
index c3d906a..0000000
--- a/include/asm-arm/arch-ixp23xx/memory.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/memory.h
- *
- * Copyright (c) 2003-2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/arch/hardware.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET		(0x00000000)
-
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#ifndef __ASSEMBLY__
-
-#define __virt_to_bus(v)						\
-	({ unsigned int ret;						\
-	ret = ((__virt_to_phys(v) - 0x00000000) +			\
-	 (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)); 	\
-	ret; })
-
-#define __bus_to_virt(b)						\
-	({ unsigned int data;						\
-	data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR);		\
-	 __phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); })
-
-#define arch_is_coherent()	1
-
-#endif
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/platform.h b/include/asm-arm/arch-ixp23xx/platform.h
deleted file mode 100644
index db8aa30..0000000
--- a/include/asm-arm/arch-ixp23xx/platform.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/platform.h
- *
- * Various bits of code used by platform-level code.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2005 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned long ixp2000_reg_read(volatile void *reg)
-{
-	return *((volatile unsigned long *)reg);
-}
-
-static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
-{
-	*((volatile unsigned long *)reg) = val;
-}
-
-static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
-{
-	*((volatile unsigned long *)reg) = val;
-}
-
-struct pci_sys_data;
-
-void ixp23xx_map_io(void);
-void ixp23xx_init_irq(void);
-void ixp23xx_sys_init(void);
-int ixp23xx_pci_setup(int, struct pci_sys_data *);
-void ixp23xx_pci_preinit(void);
-struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*);
-void ixp23xx_pci_slave_init(void);
-
-extern struct sys_timer ixp23xx_timer;
-
-#define IXP23XX_UART_XTAL		14745600
-
-#ifndef __ASSEMBLY__
-/*
- * Is system memory on the XSI or CPP bus?
- */
-static inline unsigned ixp23xx_cpp_boot(void)
-{
-	return (*IXP23XX_EXP_CFG0 & IXP23XX_EXP_CFG0_XSI_NOT_PRES);
-}
-#endif
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/system.h b/include/asm-arm/arch-ixp23xx/system.h
deleted file mode 100644
index 54e8a51..0000000
--- a/include/asm-arm/arch-ixp23xx/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/system.h
- *
- * Copyright (C) 2003 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/arch/hardware.h>
-#include <asm/mach-types.h>
-
-static inline void arch_idle(void)
-{
-#if 0
-	if (!hlt_counter)
-		cpu_do_idle();
-#endif
-}
-
-static inline void arch_reset(char mode)
-{
-	/* First try machine specific support */
-	if (machine_is_ixdp2351()) {
-		*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC;
-		(void) *IXDP2351_CPLD_RESET1_REG;
-		*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE;
-	}
-
-	/* Use on-chip reset capability */
-	*IXP23XX_RESET0 |= IXP23XX_RST_ALL;
-}
diff --git a/include/asm-arm/arch-ixp23xx/time.h b/include/asm-arm/arch-ixp23xx/time.h
deleted file mode 100644
index f6828fd..0000000
--- a/include/asm-arm/arch-ixp23xx/time.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/time.h
- */
diff --git a/include/asm-arm/arch-ixp23xx/timex.h b/include/asm-arm/arch-ixp23xx/timex.h
deleted file mode 100644
index 516f72f..0000000
--- a/include/asm-arm/arch-ixp23xx/timex.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/timex.h
- *
- * XScale architecture timex specifications
- */
-
-#define CLOCK_TICK_RATE 75000000
diff --git a/include/asm-arm/arch-ixp23xx/uncompress.h b/include/asm-arm/arch-ixp23xx/uncompress.h
deleted file mode 100644
index 16c1110..0000000
--- a/include/asm-arm/arch-ixp23xx/uncompress.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/uncompress.h
- *
- * Copyright (C) 2002-2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/arch/ixp23xx.h>
-#include <linux/serial_reg.h>
-
-#define UART_BASE	((volatile u32 *)IXP23XX_UART1_PHYS)
-
-static inline void putc(char c)
-{
-	int j;
-
-	for (j = 0; j < 0x1000; j++) {
-		if (UART_BASE[UART_LSR] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	UART_BASE[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/vmalloc.h b/include/asm-arm/arch-ixp23xx/vmalloc.h
deleted file mode 100644
index 9f25666..0000000
--- a/include/asm-arm/arch-ixp23xx/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/vmalloc.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- * NPU mappings end at 0xf0000000 and we allocate 64MB for board
- * specific static I/O.
- */
-
-#define VMALLOC_END	(0xec000000)
diff --git a/include/asm-arm/arch-ixp4xx/avila.h b/include/asm-arm/arch-ixp4xx/avila.h
deleted file mode 100644
index 88f053d..0000000
--- a/include/asm-arm/arch-ixp4xx/avila.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/avila.h
- *
- * Gateworks Avila platform specific definitions
- *
- * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
- *
- * Based on ixdp425.h
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/arch/hardware.h>"
-#endif
-
-#define	AVILA_SDA_PIN		7
-#define	AVILA_SCL_PIN		6
-
-/*
- * AVILA PCI IRQs
- */
-#define AVILA_PCI_MAX_DEV	4
-#define LOFT_PCI_MAX_DEV    6
-#define AVILA_PCI_IRQ_LINES	4
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define AVILA_PCI_INTA_PIN	11
-#define AVILA_PCI_INTB_PIN	10
-#define AVILA_PCI_INTC_PIN	9
-#define AVILA_PCI_INTD_PIN	8
-
-
diff --git a/include/asm-arm/arch-ixp4xx/coyote.h b/include/asm-arm/arch-ixp4xx/coyote.h
deleted file mode 100644
index 428b298a..0000000
--- a/include/asm-arm/arch-ixp4xx/coyote.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/coyote.h
- *
- * ADI Engineering platform specific definitions
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista, Software, Inc. 
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/arch/hardware.h>"
-#endif
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define	COYOTE_PCI_SLOT0_PIN	6
-#define	COYOTE_PCI_SLOT1_PIN	11
-
-#define	COYOTE_PCI_SLOT0_DEVID	14
-#define	COYOTE_PCI_SLOT1_DEVID	15
-
-#define	COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
-#define	COYOTE_IDE_BASE_VIRT	0xFFFE1000
-#define	COYOTE_IDE_REGION_SIZE	0x1000
-
-#define	COYOTE_IDE_DATA_PORT	0xFFFE10E0
-#define	COYOTE_IDE_CTRL_PORT	0xFFFE10FC
-#define	COYOTE_IDE_ERROR_PORT	0xFFFE10E2
-
diff --git a/include/asm-arm/arch-ixp4xx/cpu.h b/include/asm-arm/arch-ixp4xx/cpu.h
deleted file mode 100644
index 2fa3d6b..0000000
--- a/include/asm-arm/arch-ixp4xx/cpu.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/cpu.h
- *
- * IXP4XX cpu type detection
- *
- * Copyright (C) 2007 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_CPU_H__
-#define __ASM_ARCH_CPU_H__
-
-extern unsigned int processor_id;
-/* Processor id value in CP15 Register 0 */
-#define IXP425_PROCESSOR_ID_VALUE	0x690541c0
-#define IXP435_PROCESSOR_ID_VALUE	0x69054040
-#define IXP465_PROCESSOR_ID_VALUE	0x69054200
-#define IXP4XX_PROCESSOR_ID_MASK	0xfffffff0
-
-#define cpu_is_ixp42x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
-			  IXP425_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp43x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
-			  IXP435_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp46x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
-			  IXP465_PROCESSOR_ID_VALUE)
-
-static inline u32 ixp4xx_read_feature_bits(void)
-{
-	unsigned int val = ~*IXP4XX_EXP_CFG2;
-	val &= ~IXP4XX_FEATURE_RESERVED;
-	if (!cpu_is_ixp46x())
-		val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
-
-	return val;
-}
-
-static inline void ixp4xx_write_feature_bits(u32 value)
-{
-	*IXP4XX_EXP_CFG2 = ~value;
-}
-
-#endif  /* _ASM_ARCH_CPU_H */
diff --git a/include/asm-arm/arch-ixp4xx/debug-macro.S b/include/asm-arm/arch-ixp4xx/debug-macro.S
deleted file mode 100644
index 37bc8ef..0000000
--- a/include/asm-arm/arch-ixp4xx/debug-macro.S
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/include/asm-arm/arch-ixp4xx/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-                .macro  addruart,rx
-                mrc     p15, 0, \rx, c1, c0
-                tst     \rx, #1                 @ MMU enabled?
-                moveq   \rx, #0xc8000000
-                movne   \rx, #0xff000000
-		orrne	\rx, \rx, #0x00b00000
-                add     \rx,\rx,#3              @ Uart regs are at off set of 3 if
-						@ byte writes used - Big Endian.
-                .endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ixp4xx/dma.h b/include/asm-arm/arch-ixp4xx/dma.h
deleted file mode 100644
index 0b755d6..0000000
--- a/include/asm-arm/arch-ixp4xx/dma.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/dma.h
- *
- * Copyright (C) 2001-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include <linux/device.h>
-#include <asm/page.h>
-#include <asm/sizes.h>
-#include <asm/arch/hardware.h>
-
-#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-ixp4xx/dsmg600.h b/include/asm-arm/arch-ixp4xx/dsmg600.h
deleted file mode 100644
index 5afae8c..0000000
--- a/include/asm-arm/arch-ixp4xx/dsmg600.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * DSM-G600 platform specific definitions
- *
- * Copyright (C) 2006 Tower Technologies
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- *
- * based on ixdp425.h:
- *	Copyright 2004 (C) MontaVista, Software, Inc.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/arch/hardware.h>"
-#endif
-
-#define DSMG600_SDA_PIN		5
-#define DSMG600_SCL_PIN		4
-
-/*
- * DSMG600 PCI IRQs
- */
-#define DSMG600_PCI_MAX_DEV	4
-#define DSMG600_PCI_IRQ_LINES	3
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define DSMG600_PCI_INTA_PIN	11
-#define DSMG600_PCI_INTB_PIN	10
-#define DSMG600_PCI_INTC_PIN	9
-#define DSMG600_PCI_INTD_PIN	8
-#define DSMG600_PCI_INTE_PIN	7
-#define DSMG600_PCI_INTF_PIN	6
-
-/* DSM-G600 Timer Setting */
-#define DSMG600_FREQ 66000000
-
-/* Buttons */
-
-#define DSMG600_PB_GPIO		15	/* power button */
-#define DSMG600_RB_GPIO		3	/* reset button */
-
-/* Power control */
-
-#define DSMG600_PO_GPIO		2	/* power off */
-
-/* LEDs */
-
-#define DSMG600_LED_PWR_GPIO	0
-#define DSMG600_LED_WLAN_GPIO	14
diff --git a/include/asm-arm/arch-ixp4xx/entry-macro.S b/include/asm-arm/arch-ixp4xx/entry-macro.S
deleted file mode 100644
index ed313c5..0000000
--- a/include/asm-arm/arch-ixp4xx/entry-macro.S
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/entry-macro.S
- *
- * Low-level IRQ helper macros for IXP4xx-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
-		ldr	\irqstat, [\irqstat]		@ get interrupts
-		cmp	\irqstat, #0
-		beq	1001f				@ upper IRQ?
-		clz     \irqnr, \irqstat
-		mov     \base, #31
-		sub     \irqnr, \base, \irqnr
-		b	1002f				@ lower IRQ being
-							@ handled
-
-1001:
-		/*
-		 * IXP465/IXP435 has an upper IRQ status register
-		 */
-#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
-		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET)
-		ldr	\irqstat, [\irqstat]		@ get upper interrupts
-		mov	\irqnr, #63
-		clz	\irqstat, \irqstat
- 		cmp	\irqstat, #32
-		subne	\irqnr, \irqnr, \irqstat
-#endif
-1002:
-		.endm
-
-
diff --git a/include/asm-arm/arch-ixp4xx/fsg.h b/include/asm-arm/arch-ixp4xx/fsg.h
deleted file mode 100644
index 168b984..0000000
--- a/include/asm-arm/arch-ixp4xx/fsg.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/fsg.h
- *
- * Freecom FSG-3 platform specific definitions
- *
- * Author: Rod Whitby <rod@whitby.id.au>
- * Author: Tomasz Chmielewski <mangoo@wpkg.org>
- * Maintainers: http://www.nslu2-linux.org
- *
- * Based on coyote.h by
- * Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/arch/hardware.h>"
-#endif
-
-#define FSG_SDA_PIN		12
-#define FSG_SCL_PIN		13
-
-/*
- * FSG PCI IRQs
- */
-#define FSG_PCI_MAX_DEV		3
-#define FSG_PCI_IRQ_LINES	3
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define FSG_PCI_INTA_PIN	6
-#define FSG_PCI_INTB_PIN	7
-#define FSG_PCI_INTC_PIN	5
-
-/* Buttons */
-
-#define FSG_SB_GPIO		4	/* sync button */
-#define FSG_RB_GPIO		9	/* reset button */
-#define FSG_UB_GPIO		10	/* usb button */
-
-/* LEDs */
-
-#define FSG_LED_WLAN_BIT	0
-#define FSG_LED_WAN_BIT		1
-#define FSG_LED_SATA_BIT	2
-#define FSG_LED_USB_BIT		4
-#define FSG_LED_RING_BIT	5
-#define FSG_LED_SYNC_BIT	7
diff --git a/include/asm-arm/arch-ixp4xx/gpio.h b/include/asm-arm/arch-ixp4xx/gpio.h
deleted file mode 100644
index 28e7d27..0000000
--- a/include/asm-arm/arch-ixp4xx/gpio.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/gpio.h
- *
- * IXP4XX GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Milan Svoboda <msvoboda@ra.rockwell.com>
- * Based on PXA implementation by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_IXP4XX_GPIO_H
-#define __ASM_ARCH_IXP4XX_GPIO_H
-
-#include <asm/arch/hardware.h>
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-	return;
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
-	gpio_line_config(gpio, IXP4XX_GPIO_IN);
-	return 0;
-}
-
-static inline int gpio_direction_output(unsigned gpio, int level)
-{
-	gpio_line_set(gpio, level);
-	gpio_line_config(gpio, IXP4XX_GPIO_OUT);
-	return 0;
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	int value;
-
-	gpio_line_get(gpio, &value);
-
-	return value;
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	gpio_line_set(gpio, value);
-}
-
-#include <asm-generic/gpio.h>			/* cansleep wrappers */
-
-extern int gpio_to_irq(int gpio);
-extern int irq_to_gpio(int gpio);
-
-#endif
-
diff --git a/include/asm-arm/arch-ixp4xx/gtwx5715.h b/include/asm-arm/arch-ixp4xx/gtwx5715.h
deleted file mode 100644
index 2192ded..0000000
--- a/include/asm-arm/arch-ixp4xx/gtwx5715.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/gtwx5715.h
- *
- * Gemtek GTWX5715 Gateway (Linksys WRV54G)
- *
- * Copyright 2004 (c) George T. Joseph
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/arch/hardware.h>"
-#endif
-#include "irqs.h"
-
-#define GTWX5715_GPIO0	0
-#define GTWX5715_GPIO1	1
-#define GTWX5715_GPIO2	2
-#define GTWX5715_GPIO3	3
-#define GTWX5715_GPIO4	4
-#define GTWX5715_GPIO5	5
-#define GTWX5715_GPIO6	6
-#define GTWX5715_GPIO7	7
-#define GTWX5715_GPIO8	8
-#define GTWX5715_GPIO9	9
-#define GTWX5715_GPIO10	10
-#define GTWX5715_GPIO11	11
-#define GTWX5715_GPIO12	12
-#define GTWX5715_GPIO13	13
-#define GTWX5715_GPIO14	14
-
-#define GTWX5715_GPIO0_IRQ			IRQ_IXP4XX_GPIO0
-#define GTWX5715_GPIO1_IRQ			IRQ_IXP4XX_GPIO1
-#define GTWX5715_GPIO2_IRQ			IRQ_IXP4XX_GPIO2
-#define GTWX5715_GPIO3_IRQ			IRQ_IXP4XX_GPIO3
-#define GTWX5715_GPIO4_IRQ			IRQ_IXP4XX_GPIO4
-#define GTWX5715_GPIO5_IRQ			IRQ_IXP4XX_GPIO5
-#define GTWX5715_GPIO6_IRQ			IRQ_IXP4XX_GPIO6
-#define GTWX5715_GPIO7_IRQ			IRQ_IXP4XX_GPIO7
-#define GTWX5715_GPIO8_IRQ			IRQ_IXP4XX_GPIO8
-#define GTWX5715_GPIO9_IRQ			IRQ_IXP4XX_GPIO9
-#define GTWX5715_GPIO10_IRQ		IRQ_IXP4XX_GPIO10
-#define GTWX5715_GPIO11_IRQ		IRQ_IXP4XX_GPIO11
-#define GTWX5715_GPIO12_IRQ		IRQ_IXP4XX_GPIO12
-#define GTWX5715_GPIO13_IRQ		IRQ_IXP4XX_SW_INT1
-#define GTWX5715_GPIO14_IRQ		IRQ_IXP4XX_SW_INT2
-
-/* PCI controller GPIO to IRQ pin mappings
-
-			INTA	INTB
-SLOT 0	10		11
-SLOT 1	11		10
-
-*/
-
-#define	GTWX5715_PCI_SLOT0_DEVID	0
-#define	GTWX5715_PCI_SLOT0_INTA_GPIO	GTWX5715_GPIO10
-#define	GTWX5715_PCI_SLOT0_INTB_GPIO	GTWX5715_GPIO11
-#define	GTWX5715_PCI_SLOT0_INTA_IRQ	GTWX5715_GPIO10_IRQ
-#define	GTWX5715_PCI_SLOT0_INTB_IRQ	GTWX5715_GPIO11_IRQ
-
-#define	GTWX5715_PCI_SLOT1_DEVID	1
-#define	GTWX5715_PCI_SLOT1_INTA_GPIO	GTWX5715_GPIO11
-#define	GTWX5715_PCI_SLOT1_INTB_GPIO	GTWX5715_GPIO10
-#define	GTWX5715_PCI_SLOT1_INTA_IRQ	GTWX5715_GPIO11_IRQ
-#define	GTWX5715_PCI_SLOT1_INTB_IRQ	GTWX5715_GPIO10_IRQ
-
-#define GTWX5715_PCI_SLOT_COUNT			2
-#define GTWX5715_PCI_INT_PIN_COUNT		2
-
-/*
- * GPIO 5,6,7 and12 are hard wired to the Kendin KS8995M Switch
- * and operate as an SPI type interface.  The details of the interface
- * are available on Kendin/Micrel's web site.
- */
-
-#define GTWX5715_KSSPI_SELECT	GTWX5715_GPIO5
-#define GTWX5715_KSSPI_TXD		GTWX5715_GPIO6
-#define GTWX5715_KSSPI_CLOCK	GTWX5715_GPIO7
-#define GTWX5715_KSSPI_RXD		GTWX5715_GPIO12
-
-/*
- * The "reset" button is wired to GPIO 3.
- * The GPIO is brought "low" when the button is pushed.
- */
-
-#define GTWX5715_BUTTON_GPIO	GTWX5715_GPIO3
-#define GTWX5715_BUTTON_IRQ	GTWX5715_GPIO3_IRQ
-
-/*
- *  Board Label      Front Label
- *  LED1             Power
- *  LED2             Wireless-G
- *  LED3             not populated but could be
- *  LED4             Internet
- *  LED5 - LED8      Controlled by KS8995M Switch
- *  LED9             DMZ
- */
-
-#define GTWX5715_LED1_GPIO		GTWX5715_GPIO2
-#define GTWX5715_LED2_GPIO		GTWX5715_GPIO9
-#define GTWX5715_LED3_GPIO		GTWX5715_GPIO8
-#define GTWX5715_LED4_GPIO		GTWX5715_GPIO1
-#define GTWX5715_LED9_GPIO		GTWX5715_GPIO4
diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h
deleted file mode 100644
index fa723a6..0000000
--- a/include/asm-arm/arch-ixp4xx/hardware.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/hardware.h 
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-/*
- * Hardware definitions for IXP4xx based systems
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#define __ASM_ARCH_HARDWARE_H__
-
-#define PCIBIOS_MIN_IO		0x00001000
-#define PCIBIOS_MIN_MEM		(cpu_is_ixp43x() ? 0x40000000 : 0x48000000)
-
-/*
- * We override the standard dma-mask routines for bouncing.
- */
-#define	HAVE_ARCH_PCI_SET_DMA_MASK
-
-#define pcibios_assign_all_busses()	1
-
-/* Register locations and bits */
-#include "ixp4xx-regs.h"
-
-#ifndef __ASSEMBLER__
-#include <asm/arch/cpu.h>
-#endif
-
-/* Platform helper functions and definitions */
-#include "platform.h"
-
-/* Platform specific details */
-#include "ixdp425.h"
-#include "avila.h"
-#include "coyote.h"
-#include "prpmc1100.h"
-#include "nslu2.h"
-#include "nas100d.h"
-#include "dsmg600.h"
-#include "fsg.h"
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-ixp4xx/io.h b/include/asm-arm/arch-ixp4xx/io.h
deleted file mode 100644
index 8e74260..0000000
--- a/include/asm-arm/arch-ixp4xx/io.h
+++ /dev/null
@@ -1,569 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/io.h
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002-2005  MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <linux/bitops.h>
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffff0000
-
-extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
-extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
-
-
-/*
- * IXP4xx provides two methods of accessing PCI memory space:
- *
- * 1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
- *    To access PCI via this space, we simply ioremap() the BAR
- *    into the kernel and we can use the standard read[bwl]/write[bwl]
- *    macros. This is the preffered method due to speed but it
- *    limits the system to just 64MB of PCI memory. This can be 
- *    problamatic if using video cards and other memory-heavy
- *    targets.
- *
- * 2) If > 64MB of memory space is required, the IXP4xx can be configured
- *    to use indirect registers to access PCI (as we do below for I/O
- *    transactions). This allows for up to 128MB (0x48000000 to 0x4fffffff)
- *    of memory on the bus. The disadvantage of this is that every 
- *    PCI access requires three local register accesses plus a spinlock,
- *    but in some cases the performance hit is acceptable. In addition,
- *    you cannot mmap() PCI devices in this case.
- *
- */
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-
-#define __mem_pci(a)		(a)
-
-#else
-
-#include <linux/mm.h>
-
-/*
- * In the case of using indirect PCI, we simply return the actual PCI
- * address and our read/write implementation use that to drive the 
- * access registers. If something outside of PCI is ioremap'd, we
- * fallback to the default.
- */
-static inline void __iomem *
-__ixp4xx_ioremap(unsigned long addr, size_t size, unsigned int mtype)
-{
-	if((addr < PCIBIOS_MIN_MEM) || (addr > 0x4fffffff))
-		return __arm_ioremap(addr, size, mtype);
-
-	return (void __iomem *)addr;
-}
-
-static inline void
-__ixp4xx_iounmap(void __iomem *addr)
-{
-	if ((__force u32)addr >= VMALLOC_START)
-		__iounmap(addr);
-}
-
-#define __arch_ioremap(a, s, f)		__ixp4xx_ioremap(a, s, f)
-#define	__arch_iounmap(a)		__ixp4xx_iounmap(a)
-
-#define	writeb(v, p)			__ixp4xx_writeb(v, p)
-#define	writew(v, p)			__ixp4xx_writew(v, p)
-#define	writel(v, p)			__ixp4xx_writel(v, p)
-
-#define	writesb(p, v, l)		__ixp4xx_writesb(p, v, l)
-#define	writesw(p, v, l)		__ixp4xx_writesw(p, v, l)
-#define	writesl(p, v, l)		__ixp4xx_writesl(p, v, l)
-	
-#define	readb(p)			__ixp4xx_readb(p)
-#define	readw(p)			__ixp4xx_readw(p)
-#define	readl(p)			__ixp4xx_readl(p)
-	
-#define	readsb(p, v, l)			__ixp4xx_readsb(p, v, l)
-#define	readsw(p, v, l)			__ixp4xx_readsw(p, v, l)
-#define	readsl(p, v, l)			__ixp4xx_readsl(p, v, l)
-
-static inline void 
-__ixp4xx_writeb(u8 value, volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (addr >= VMALLOC_START) {
-		__raw_writeb(value, addr);
-		return;
-	}
-
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
-}
-
-static inline void
-__ixp4xx_writesb(volatile void __iomem *bus_addr, const u8 *vaddr, int count)
-{
-	while (count--)
-		writeb(*vaddr++, bus_addr);
-}
-
-static inline void 
-__ixp4xx_writew(u16 value, volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (addr >= VMALLOC_START) {
-		__raw_writew(value, addr);
-		return;
-	}
-
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
-}
-
-static inline void
-__ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count)
-{
-	while (count--)
-		writew(*vaddr++, bus_addr);
-}
-
-static inline void 
-__ixp4xx_writel(u32 value, volatile void __iomem *p)
-{
-	u32 addr = (__force u32)p;
-	if (addr >= VMALLOC_START) {
-		__raw_writel(value, p);
-		return;
-	}
-
-	ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value);
-}
-
-static inline void
-__ixp4xx_writesl(volatile void __iomem *bus_addr, const u32 *vaddr, int count)
-{
-	while (count--)
-		writel(*vaddr++, bus_addr);
-}
-
-static inline unsigned char 
-__ixp4xx_readb(const volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (addr >= VMALLOC_START)
-		return __raw_readb(addr);
-
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
-		return 0xff;
-
-	return data >> (8*n);
-}
-
-static inline void
-__ixp4xx_readsb(const volatile void __iomem *bus_addr, u8 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = readb(bus_addr);
-}
-
-static inline unsigned short 
-__ixp4xx_readw(const volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (addr >= VMALLOC_START)
-		return __raw_readw(addr);
-
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
-		return 0xffff;
-
-	return data>>(8*n);
-}
-
-static inline void 
-__ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = readw(bus_addr);
-}
-
-static inline unsigned long 
-__ixp4xx_readl(const volatile void __iomem *p)
-{
-	u32 addr = (__force u32)p;
-	u32 data;
-
-	if (addr >= VMALLOC_START)
-		return __raw_readl(p);
-
-	if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data))
-		return 0xffffffff;
-
-	return data;
-}
-
-static inline void 
-__ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = readl(bus_addr);
-}
-
-
-/*
- * We can use the built-in functions b/c they end up calling writeb/readb
- */
-#define memset_io(c,v,l)		_memset_io((c),(v),(l))
-#define memcpy_fromio(a,c,l)		_memcpy_fromio((a),(c),(l))
-#define memcpy_toio(c,a,l)		_memcpy_toio((c),(a),(l))
-
-#endif
-
-#ifndef CONFIG_PCI
-
-#define	__io(v)		v
-
-#else
-
-/*
- * IXP4xx does not have a transparent cpu -> PCI I/O translation
- * window.  Instead, it has a set of registers that must be tweaked
- * with the proper byte lanes, command types, and address for the
- * transaction.  This means that we need to override the default
- * I/O functions.
- */
-#define	outb(p, v)			__ixp4xx_outb(p, v)
-#define	outw(p, v)			__ixp4xx_outw(p, v)
-#define	outl(p, v)			__ixp4xx_outl(p, v)
-	
-#define	outsb(p, v, l)			__ixp4xx_outsb(p, v, l)
-#define	outsw(p, v, l)			__ixp4xx_outsw(p, v, l)
-#define	outsl(p, v, l)			__ixp4xx_outsl(p, v, l)
-
-#define	inb(p)				__ixp4xx_inb(p)
-#define	inw(p)				__ixp4xx_inw(p)
-#define	inl(p)				__ixp4xx_inl(p)
-
-#define	insb(p, v, l)			__ixp4xx_insb(p, v, l)
-#define	insw(p, v, l)			__ixp4xx_insw(p, v, l)
-#define	insl(p, v, l)			__ixp4xx_insl(p, v, l)
-
-
-static inline void 
-__ixp4xx_outb(u8 value, u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
-}
-
-static inline void 
-__ixp4xx_outsb(u32 io_addr, const u8 *vaddr, u32 count)
-{
-	while (count--)
-		outb(*vaddr++, io_addr);
-}
-
-static inline void 
-__ixp4xx_outw(u16 value, u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
-}
-
-static inline void 
-__ixp4xx_outsw(u32 io_addr, const u16 *vaddr, u32 count)
-{
-	while (count--)
-		outw(cpu_to_le16(*vaddr++), io_addr);
-}
-
-static inline void 
-__ixp4xx_outl(u32 value, u32 addr)
-{
-	ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value);
-}
-
-static inline void 
-__ixp4xx_outsl(u32 io_addr, const u32 *vaddr, u32 count)
-{
-	while (count--)
-		outl(*vaddr++, io_addr);
-}
-
-static inline u8 
-__ixp4xx_inb(u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
-		return 0xff;
-
-	return data >> (8*n);
-}
-
-static inline void 
-__ixp4xx_insb(u32 io_addr, u8 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = inb(io_addr);
-}
-
-static inline u16 
-__ixp4xx_inw(u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
-		return 0xffff;
-
-	return data>>(8*n);
-}
-
-static inline void 
-__ixp4xx_insw(u32 io_addr, u16 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = le16_to_cpu(inw(io_addr));
-}
-
-static inline u32 
-__ixp4xx_inl(u32 addr)
-{
-	u32 data;
-	if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data))
-		return 0xffffffff;
-
-	return data;
-}
-
-static inline void 
-__ixp4xx_insl(u32 io_addr, u32 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = inl(io_addr);
-}
-
-#define PIO_OFFSET      0x10000UL
-#define PIO_MASK        0x0ffffUL
-
-#define	__is_io_address(p)	(((unsigned long)p >= PIO_OFFSET) && \
-					((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
-static inline unsigned int
-__ixp4xx_ioread8(const void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		return	(unsigned int)__ixp4xx_inb(port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return (unsigned int)__raw_readb(port);
-#else
-		return (unsigned int)__ixp4xx_readb(addr);
-#endif
-}
-
-static inline void
-__ixp4xx_ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_insb(port & PIO_MASK, vaddr, count);
-	else
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_readsb(addr, vaddr, count);
-#else
-		__ixp4xx_readsb(addr, vaddr, count);
-#endif
-}
-
-static inline unsigned int
-__ixp4xx_ioread16(const void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		return	(unsigned int)__ixp4xx_inw(port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return le16_to_cpu(__raw_readw((u32)port));
-#else
-		return (unsigned int)__ixp4xx_readw(addr);
-#endif
-}
-
-static inline void
-__ixp4xx_ioread16_rep(const void __iomem *addr, void *vaddr, u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_insw(port & PIO_MASK, vaddr, count);
-	else
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_readsw(addr, vaddr, count);
-#else
-		__ixp4xx_readsw(addr, vaddr, count);
-#endif
-}
-
-static inline unsigned int
-__ixp4xx_ioread32(const void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		return	(unsigned int)__ixp4xx_inl(port & PIO_MASK);
-	else {
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return le32_to_cpu((__force __le32)__raw_readl(addr));
-#else
-		return (unsigned int)__ixp4xx_readl(addr);
-#endif
-	}
-}
-
-static inline void
-__ixp4xx_ioread32_rep(const void __iomem *addr, void *vaddr, u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_insl(port & PIO_MASK, vaddr, count);
-	else
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_readsl(addr, vaddr, count);
-#else
-		__ixp4xx_readsl(addr, vaddr, count);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite8(u8 value, void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_outb(value, port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writeb(value, port);
-#else
-		__ixp4xx_writeb(value, addr);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite8_rep(void __iomem *addr, const void *vaddr, u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_outsb(port & PIO_MASK, vaddr, count);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writesb(addr, vaddr, count);
-#else
-		__ixp4xx_writesb(addr, vaddr, count);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite16(u16 value, void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_outw(value, port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writew(cpu_to_le16(value), addr);
-#else
-		__ixp4xx_writew(value, addr);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite16_rep(void __iomem *addr, const void *vaddr, u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_outsw(port & PIO_MASK, vaddr, count);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writesw(addr, vaddr, count);
-#else
-		__ixp4xx_writesw(addr, vaddr, count);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite32(u32 value, void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_outl(value, port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writel((u32 __force)cpu_to_le32(value), addr);
-#else
-		__ixp4xx_writel(value, addr);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite32_rep(void __iomem *addr, const void *vaddr, u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_outsl(port & PIO_MASK, vaddr, count);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writesl(addr, vaddr, count);
-#else
-		__ixp4xx_writesl(addr, vaddr, count);
-#endif
-}
-
-#define	ioread8(p)			__ixp4xx_ioread8(p)
-#define	ioread16(p)			__ixp4xx_ioread16(p)
-#define	ioread32(p)			__ixp4xx_ioread32(p)
-
-#define	ioread8_rep(p, v, c)		__ixp4xx_ioread8_rep(p, v, c)
-#define	ioread16_rep(p, v, c)		__ixp4xx_ioread16_rep(p, v, c)
-#define	ioread32_rep(p, v, c)		__ixp4xx_ioread32_rep(p, v, c)
-
-#define	iowrite8(v,p)			__ixp4xx_iowrite8(v,p)
-#define	iowrite16(v,p)			__ixp4xx_iowrite16(v,p)
-#define	iowrite32(v,p)			__ixp4xx_iowrite32(v,p)
-
-#define	iowrite8_rep(p, v, c)		__ixp4xx_iowrite8_rep(p, v, c)
-#define	iowrite16_rep(p, v, c)		__ixp4xx_iowrite16_rep(p, v, c)
-#define	iowrite32_rep(p, v, c)		__ixp4xx_iowrite32_rep(p, v, c)
-
-#define	ioport_map(port, nr)		((void __iomem*)(port + PIO_OFFSET))
-#define	ioport_unmap(addr)
-#endif	// !CONFIG_PCI
-
-#endif	//  __ASM_ARM_ARCH_IO_H
-
diff --git a/include/asm-arm/arch-ixp4xx/irqs.h b/include/asm-arm/arch-ixp4xx/irqs.h
deleted file mode 100644
index 674af4a..0000000
--- a/include/asm-arm/arch-ixp4xx/irqs.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/irqs.h 
- *
- * IRQ definitions for IXP4XX based systems
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _ARCH_IXP4XX_IRQS_H_
-#define _ARCH_IXP4XX_IRQS_H_
-
-
-#define IRQ_IXP4XX_NPEA		0
-#define IRQ_IXP4XX_NPEB		1
-#define IRQ_IXP4XX_NPEC		2
-#define IRQ_IXP4XX_QM1		3
-#define IRQ_IXP4XX_QM2		4
-#define IRQ_IXP4XX_TIMER1	5
-#define IRQ_IXP4XX_GPIO0	6
-#define IRQ_IXP4XX_GPIO1	7
-#define IRQ_IXP4XX_PCI_INT	8
-#define IRQ_IXP4XX_PCI_DMA1	9
-#define IRQ_IXP4XX_PCI_DMA2	10
-#define IRQ_IXP4XX_TIMER2	11
-#define IRQ_IXP4XX_USB		12
-#define IRQ_IXP4XX_UART2	13
-#define IRQ_IXP4XX_TIMESTAMP	14
-#define IRQ_IXP4XX_UART1	15
-#define IRQ_IXP4XX_WDOG		16
-#define IRQ_IXP4XX_AHB_PMU	17
-#define IRQ_IXP4XX_XSCALE_PMU	18
-#define IRQ_IXP4XX_GPIO2	19
-#define IRQ_IXP4XX_GPIO3	20
-#define IRQ_IXP4XX_GPIO4	21
-#define IRQ_IXP4XX_GPIO5	22
-#define IRQ_IXP4XX_GPIO6	23
-#define IRQ_IXP4XX_GPIO7	24
-#define IRQ_IXP4XX_GPIO8	25
-#define IRQ_IXP4XX_GPIO9	26
-#define IRQ_IXP4XX_GPIO10	27
-#define IRQ_IXP4XX_GPIO11	28
-#define IRQ_IXP4XX_GPIO12	29
-#define IRQ_IXP4XX_SW_INT1	30
-#define IRQ_IXP4XX_SW_INT2	31
-#define IRQ_IXP4XX_USB_HOST	32
-#define IRQ_IXP4XX_I2C		33
-#define IRQ_IXP4XX_SSP		34
-#define IRQ_IXP4XX_TSYNC	35
-#define IRQ_IXP4XX_EAU_DONE	36
-#define IRQ_IXP4XX_SHA_DONE	37
-#define IRQ_IXP4XX_SWCP_PE	58
-#define IRQ_IXP4XX_QM_PE	60
-#define IRQ_IXP4XX_MCU_ECC	61
-#define IRQ_IXP4XX_EXP_PE	62
-
-/*
- * Only first 32 sources are valid if running on IXP42x systems
- */
-#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
-#define NR_IRQS			64
-#else
-#define NR_IRQS			32
-#endif
-
-#define	XSCALE_PMU_IRQ		(IRQ_IXP4XX_XSCALE_PMU)
-
-/*
- * IXDP425 board IRQs
- */
-#define	IRQ_IXDP425_PCI_INTA	IRQ_IXP4XX_GPIO11
-#define	IRQ_IXDP425_PCI_INTB	IRQ_IXP4XX_GPIO10
-#define	IRQ_IXDP425_PCI_INTC	IRQ_IXP4XX_GPIO9
-#define	IRQ_IXDP425_PCI_INTD	IRQ_IXP4XX_GPIO8
-
-/*
- * Gateworks Avila board IRQs
- */
-#define	IRQ_AVILA_PCI_INTA	IRQ_IXP4XX_GPIO11
-#define	IRQ_AVILA_PCI_INTB	IRQ_IXP4XX_GPIO10
-#define	IRQ_AVILA_PCI_INTC	IRQ_IXP4XX_GPIO9
-#define	IRQ_AVILA_PCI_INTD	IRQ_IXP4XX_GPIO8
-
-
-/*
- * PrPMC1100 Board IRQs
- */
-#define	IRQ_PRPMC1100_PCI_INTA	IRQ_IXP4XX_GPIO11
-#define	IRQ_PRPMC1100_PCI_INTB	IRQ_IXP4XX_GPIO10
-#define	IRQ_PRPMC1100_PCI_INTC	IRQ_IXP4XX_GPIO9
-#define	IRQ_PRPMC1100_PCI_INTD	IRQ_IXP4XX_GPIO8
-
-/*
- * ADI Coyote Board IRQs
- */
-#define	IRQ_COYOTE_PCI_SLOT0	IRQ_IXP4XX_GPIO6
-#define	IRQ_COYOTE_PCI_SLOT1	IRQ_IXP4XX_GPIO11
-#define	IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
-
-/*
- * NSLU2 board IRQs
- */
-#define        IRQ_NSLU2_PCI_INTA      IRQ_IXP4XX_GPIO11
-#define        IRQ_NSLU2_PCI_INTB      IRQ_IXP4XX_GPIO10
-#define        IRQ_NSLU2_PCI_INTC      IRQ_IXP4XX_GPIO9
-
-/*
- * NAS100D board IRQs
- */
-#define        IRQ_NAS100D_PCI_INTA    IRQ_IXP4XX_GPIO11
-#define        IRQ_NAS100D_PCI_INTB    IRQ_IXP4XX_GPIO10
-#define        IRQ_NAS100D_PCI_INTC    IRQ_IXP4XX_GPIO9
-#define        IRQ_NAS100D_PCI_INTD    IRQ_IXP4XX_GPIO8
-#define        IRQ_NAS100D_PCI_INTE    IRQ_IXP4XX_GPIO7
-
-/*
- * D-Link DSM-G600 RevA board IRQs
- */
-#define        IRQ_DSMG600_PCI_INTA    IRQ_IXP4XX_GPIO11
-#define        IRQ_DSMG600_PCI_INTB    IRQ_IXP4XX_GPIO10
-#define        IRQ_DSMG600_PCI_INTC    IRQ_IXP4XX_GPIO9
-#define        IRQ_DSMG600_PCI_INTD    IRQ_IXP4XX_GPIO8
-#define        IRQ_DSMG600_PCI_INTE    IRQ_IXP4XX_GPIO7
-#define        IRQ_DSMG600_PCI_INTF    IRQ_IXP4XX_GPIO6
-
-/*
- * Freecom FSG-3 Board IRQs
- */
-#define        IRQ_FSG_PCI_INTA        IRQ_IXP4XX_GPIO6
-#define        IRQ_FSG_PCI_INTB        IRQ_IXP4XX_GPIO7
-#define        IRQ_FSG_PCI_INTC        IRQ_IXP4XX_GPIO5
-
-#endif
diff --git a/include/asm-arm/arch-ixp4xx/ixdp425.h b/include/asm-arm/arch-ixp4xx/ixdp425.h
deleted file mode 100644
index d0a1dcb..0000000
--- a/include/asm-arm/arch-ixp4xx/ixdp425.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/ixdp425.h
- *
- * IXDP425 platform specific definitions
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista, Software, Inc. 
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/arch/hardware.h>"
-#endif
-
-#define	IXDP425_SDA_PIN		7
-#define	IXDP425_SCL_PIN		6
-
-/*
- * IXDP425 PCI IRQs
- */
-#define IXDP425_PCI_MAX_DEV	4
-#define IXDP425_PCI_IRQ_LINES	4
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define IXDP425_PCI_INTA_PIN	11
-#define IXDP425_PCI_INTB_PIN	10
-#define	IXDP425_PCI_INTC_PIN	9
-#define	IXDP425_PCI_INTD_PIN	8
-
-/* NAND Flash pins */
-#define	IXDP425_NAND_NCE_PIN	12
-
-#define	IXDP425_NAND_CMD_BYTE	0x01
-#define	IXDP425_NAND_ADDR_BYTE	0x02
diff --git a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
deleted file mode 100644
index 68aca85..0000000
--- a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+++ /dev/null
@@ -1,638 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
- *
- * Register definitions for IXP4xx chipset. This file contains 
- * register location and bit definitions only. Platform specific 
- * definitions and helper function declarations are in platform.h 
- * and machine-name.h.
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _ASM_ARM_IXP4XX_H_
-#define _ASM_ARM_IXP4XX_H_
-
-/*
- * IXP4xx Linux Memory Map:
- *
- * Phy		Size		Virt		Description
- * =========================================================================
- *
- * 0x00000000	0x10000000(max)	PAGE_OFFSET	System RAM
- *
- * 0x48000000	0x04000000	ioremap'd	PCI Memory Space
- *
- * 0x50000000	0x10000000	ioremap'd	EXP BUS
- *
- * 0x6000000	0x00004000	ioremap'd	QMgr
- *
- * 0xC0000000	0x00001000	0xffbff000	PCI CFG
- *
- * 0xC4000000	0x00001000	0xffbfe000	EXP CFG
- *
- * 0xC8000000	0x00013000	0xffbeb000	On-Chip Peripherals
- */
-
-/*
- * Queue Manager
- */
-#define IXP4XX_QMGR_BASE_PHYS		(0x60000000)
-#define IXP4XX_QMGR_REGION_SIZE		(0x00004000)
-
-/*
- * Expansion BUS Configuration registers
- */
-#define IXP4XX_EXP_CFG_BASE_PHYS	(0xC4000000)
-#define IXP4XX_EXP_CFG_BASE_VIRT	(0xFFBFE000)
-#define IXP4XX_EXP_CFG_REGION_SIZE	(0x00001000)
-
-/*
- * PCI Config registers
- */
-#define IXP4XX_PCI_CFG_BASE_PHYS	(0xC0000000)
-#define	IXP4XX_PCI_CFG_BASE_VIRT	(0xFFBFF000)
-#define IXP4XX_PCI_CFG_REGION_SIZE	(0x00001000)
-
-/*
- * Peripheral space
- */
-#define IXP4XX_PERIPHERAL_BASE_PHYS	(0xC8000000)
-#define IXP4XX_PERIPHERAL_BASE_VIRT	(0xFFBEB000)
-#define IXP4XX_PERIPHERAL_REGION_SIZE	(0x00013000)
-
-/*
- * Debug UART
- *
- * This is basically a remap of UART1 into a region that is section
- * aligned so that it * can be used with the low-level debug code.
- */
-#define	IXP4XX_DEBUG_UART_BASE_PHYS	(0xC8000000)
-#define	IXP4XX_DEBUG_UART_BASE_VIRT	(0xffb00000)
-#define	IXP4XX_DEBUG_UART_REGION_SIZE	(0x00001000)
-
-#define IXP4XX_EXP_CS0_OFFSET	0x00
-#define IXP4XX_EXP_CS1_OFFSET   0x04
-#define IXP4XX_EXP_CS2_OFFSET   0x08
-#define IXP4XX_EXP_CS3_OFFSET   0x0C
-#define IXP4XX_EXP_CS4_OFFSET   0x10
-#define IXP4XX_EXP_CS5_OFFSET   0x14
-#define IXP4XX_EXP_CS6_OFFSET   0x18
-#define IXP4XX_EXP_CS7_OFFSET   0x1C
-#define IXP4XX_EXP_CFG0_OFFSET	0x20
-#define IXP4XX_EXP_CFG1_OFFSET	0x24
-#define IXP4XX_EXP_CFG2_OFFSET	0x28
-#define IXP4XX_EXP_CFG3_OFFSET	0x2C
-
-/*
- * Expansion Bus Controller registers.
- */
-#define IXP4XX_EXP_REG(x) ((volatile u32 *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
-
-#define IXP4XX_EXP_CS0      IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET)
-#define IXP4XX_EXP_CS1      IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET)
-#define IXP4XX_EXP_CS2      IXP4XX_EXP_REG(IXP4XX_EXP_CS2_OFFSET) 
-#define IXP4XX_EXP_CS3      IXP4XX_EXP_REG(IXP4XX_EXP_CS3_OFFSET)
-#define IXP4XX_EXP_CS4      IXP4XX_EXP_REG(IXP4XX_EXP_CS4_OFFSET)
-#define IXP4XX_EXP_CS5      IXP4XX_EXP_REG(IXP4XX_EXP_CS5_OFFSET)
-#define IXP4XX_EXP_CS6      IXP4XX_EXP_REG(IXP4XX_EXP_CS6_OFFSET)     
-#define IXP4XX_EXP_CS7      IXP4XX_EXP_REG(IXP4XX_EXP_CS7_OFFSET)
-
-#define IXP4XX_EXP_CFG0     IXP4XX_EXP_REG(IXP4XX_EXP_CFG0_OFFSET) 
-#define IXP4XX_EXP_CFG1     IXP4XX_EXP_REG(IXP4XX_EXP_CFG1_OFFSET) 
-#define IXP4XX_EXP_CFG2     IXP4XX_EXP_REG(IXP4XX_EXP_CFG2_OFFSET) 
-#define IXP4XX_EXP_CFG3     IXP4XX_EXP_REG(IXP4XX_EXP_CFG3_OFFSET)
-
-
-/*
- * Peripheral Space Register Region Base Addresses
- */
-#define IXP4XX_UART1_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000)
-#define IXP4XX_UART2_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000)
-#define IXP4XX_PMU_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000)
-#define IXP4XX_INTC_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000)
-#define IXP4XX_GPIO_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000)
-#define IXP4XX_TIMER_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000)
-#define IXP4XX_NPEA_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000)
-#define IXP4XX_NPEB_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000)
-#define IXP4XX_NPEC_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000)
-#define IXP4XX_EthB_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000)
-#define IXP4XX_EthC_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000)
-#define IXP4XX_USB_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000)
-/* ixp46X only */
-#define IXP4XX_EthA_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xC000)
-#define IXP4XX_EthB1_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xD000)
-#define IXP4XX_EthB2_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xE000)
-#define IXP4XX_EthB3_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xF000)
-#define IXP4XX_TIMESYNC_BASE_PHYS	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x10000)
-#define IXP4XX_I2C_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x11000)
-#define IXP4XX_SSP_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000)
-
-
-#define IXP4XX_UART1_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000)
-#define IXP4XX_UART2_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000)
-#define IXP4XX_PMU_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000)
-#define IXP4XX_INTC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000)
-#define IXP4XX_GPIO_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000)
-#define IXP4XX_TIMER_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000)
-#define IXP4XX_NPEA_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x6000)
-#define IXP4XX_NPEB_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x7000)
-#define IXP4XX_NPEC_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x8000)
-#define IXP4XX_EthB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000)
-#define IXP4XX_EthC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000)
-#define IXP4XX_USB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000)
-/* ixp46X only */
-#define IXP4XX_EthA_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xC000)
-#define IXP4XX_EthB1_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xD000)
-#define IXP4XX_EthB2_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xE000)
-#define IXP4XX_EthB3_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xF000)
-#define IXP4XX_TIMESYNC_BASE_VIRT	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x10000)
-#define IXP4XX_I2C_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000)
-#define IXP4XX_SSP_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000)
-
-/*
- * Constants to make it easy to access  Interrupt Controller registers
- */
-#define IXP4XX_ICPR_OFFSET	0x00 /* Interrupt Status */
-#define IXP4XX_ICMR_OFFSET	0x04 /* Interrupt Enable */
-#define IXP4XX_ICLR_OFFSET	0x08 /* Interrupt IRQ/FIQ Select */
-#define IXP4XX_ICIP_OFFSET      0x0C /* IRQ Status */
-#define IXP4XX_ICFP_OFFSET	0x10 /* FIQ Status */
-#define IXP4XX_ICHR_OFFSET	0x14 /* Interrupt Priority */
-#define IXP4XX_ICIH_OFFSET	0x18 /* IRQ Highest Pri Int */
-#define IXP4XX_ICFH_OFFSET	0x1C /* FIQ Highest Pri Int */
-
-/*
- * IXP465-only
- */
-#define	IXP4XX_ICPR2_OFFSET	0x20 /* Interrupt Status 2 */
-#define	IXP4XX_ICMR2_OFFSET	0x24 /* Interrupt Enable 2 */
-#define	IXP4XX_ICLR2_OFFSET	0x28 /* Interrupt IRQ/FIQ Select 2 */
-#define IXP4XX_ICIP2_OFFSET     0x2C /* IRQ Status */
-#define IXP4XX_ICFP2_OFFSET	0x30 /* FIQ Status */
-#define IXP4XX_ICEEN_OFFSET	0x34 /* Error High Pri Enable */
-
-
-/*
- * Interrupt Controller Register Definitions.
- */
-
-#define IXP4XX_INTC_REG(x) ((volatile u32 *)(IXP4XX_INTC_BASE_VIRT+(x)))
-
-#define IXP4XX_ICPR	IXP4XX_INTC_REG(IXP4XX_ICPR_OFFSET)
-#define IXP4XX_ICMR     IXP4XX_INTC_REG(IXP4XX_ICMR_OFFSET)
-#define IXP4XX_ICLR     IXP4XX_INTC_REG(IXP4XX_ICLR_OFFSET)
-#define IXP4XX_ICIP     IXP4XX_INTC_REG(IXP4XX_ICIP_OFFSET)
-#define IXP4XX_ICFP     IXP4XX_INTC_REG(IXP4XX_ICFP_OFFSET)
-#define IXP4XX_ICHR     IXP4XX_INTC_REG(IXP4XX_ICHR_OFFSET)
-#define IXP4XX_ICIH     IXP4XX_INTC_REG(IXP4XX_ICIH_OFFSET) 
-#define IXP4XX_ICFH     IXP4XX_INTC_REG(IXP4XX_ICFH_OFFSET)
-#define IXP4XX_ICPR2	IXP4XX_INTC_REG(IXP4XX_ICPR2_OFFSET)
-#define IXP4XX_ICMR2    IXP4XX_INTC_REG(IXP4XX_ICMR2_OFFSET)
-#define IXP4XX_ICLR2    IXP4XX_INTC_REG(IXP4XX_ICLR2_OFFSET)
-#define IXP4XX_ICIP2    IXP4XX_INTC_REG(IXP4XX_ICIP2_OFFSET)
-#define IXP4XX_ICFP2    IXP4XX_INTC_REG(IXP4XX_ICFP2_OFFSET)
-#define IXP4XX_ICEEN    IXP4XX_INTC_REG(IXP4XX_ICEEN_OFFSET)
-                                                                                
-/*
- * Constants to make it easy to access GPIO registers
- */
-#define IXP4XX_GPIO_GPOUTR_OFFSET       0x00
-#define IXP4XX_GPIO_GPOER_OFFSET        0x04
-#define IXP4XX_GPIO_GPINR_OFFSET        0x08
-#define IXP4XX_GPIO_GPISR_OFFSET        0x0C
-#define IXP4XX_GPIO_GPIT1R_OFFSET	0x10
-#define IXP4XX_GPIO_GPIT2R_OFFSET	0x14
-#define IXP4XX_GPIO_GPCLKR_OFFSET	0x18
-#define IXP4XX_GPIO_GPDBSELR_OFFSET	0x1C
-
-/* 
- * GPIO Register Definitions.
- * [Only perform 32bit reads/writes]
- */
-#define IXP4XX_GPIO_REG(x) ((volatile u32 *)(IXP4XX_GPIO_BASE_VIRT+(x)))
-
-#define IXP4XX_GPIO_GPOUTR	IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOUTR_OFFSET)
-#define IXP4XX_GPIO_GPOER       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOER_OFFSET)
-#define IXP4XX_GPIO_GPINR       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPINR_OFFSET)
-#define IXP4XX_GPIO_GPISR       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPISR_OFFSET)
-#define IXP4XX_GPIO_GPIT1R      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT1R_OFFSET)
-#define IXP4XX_GPIO_GPIT2R      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT2R_OFFSET)
-#define IXP4XX_GPIO_GPCLKR      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPCLKR_OFFSET)
-#define IXP4XX_GPIO_GPDBSELR    IXP4XX_GPIO_REG(IXP4XX_GPIO_GPDBSELR_OFFSET)
-
-/*
- * GPIO register bit definitions
- */
-
-/* Interrupt styles
- */
-#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH	0x0
-#define IXP4XX_GPIO_STYLE_ACTIVE_LOW	0x1
-#define IXP4XX_GPIO_STYLE_RISING_EDGE	0x2
-#define IXP4XX_GPIO_STYLE_FALLING_EDGE	0x3
-#define IXP4XX_GPIO_STYLE_TRANSITIONAL	0x4
-
-/* 
- * Mask used to clear interrupt styles 
- */
-#define IXP4XX_GPIO_STYLE_CLEAR		0x7
-#define IXP4XX_GPIO_STYLE_SIZE		3
-
-/*
- * Constants to make it easy to access Timer Control/Status registers
- */
-#define IXP4XX_OSTS_OFFSET	0x00  /* Continious TimeStamp */
-#define IXP4XX_OST1_OFFSET	0x04  /* Timer 1 Timestamp */
-#define IXP4XX_OSRT1_OFFSET	0x08  /* Timer 1 Reload */
-#define IXP4XX_OST2_OFFSET	0x0C  /* Timer 2 Timestamp */
-#define IXP4XX_OSRT2_OFFSET	0x10  /* Timer 2 Reload */
-#define IXP4XX_OSWT_OFFSET	0x14  /* Watchdog Timer */
-#define IXP4XX_OSWE_OFFSET	0x18  /* Watchdog Enable */
-#define IXP4XX_OSWK_OFFSET	0x1C  /* Watchdog Key */
-#define IXP4XX_OSST_OFFSET	0x20  /* Timer Status */
-
-/*
- * Operating System Timer Register Definitions.
- */
-
-#define IXP4XX_TIMER_REG(x) ((volatile u32 *)(IXP4XX_TIMER_BASE_VIRT+(x)))
-
-#define IXP4XX_OSTS	IXP4XX_TIMER_REG(IXP4XX_OSTS_OFFSET)
-#define IXP4XX_OST1	IXP4XX_TIMER_REG(IXP4XX_OST1_OFFSET)
-#define IXP4XX_OSRT1	IXP4XX_TIMER_REG(IXP4XX_OSRT1_OFFSET)
-#define IXP4XX_OST2	IXP4XX_TIMER_REG(IXP4XX_OST2_OFFSET)
-#define IXP4XX_OSRT2	IXP4XX_TIMER_REG(IXP4XX_OSRT2_OFFSET)
-#define IXP4XX_OSWT	IXP4XX_TIMER_REG(IXP4XX_OSWT_OFFSET)
-#define IXP4XX_OSWE	IXP4XX_TIMER_REG(IXP4XX_OSWE_OFFSET)
-#define IXP4XX_OSWK	IXP4XX_TIMER_REG(IXP4XX_OSWK_OFFSET)
-#define IXP4XX_OSST	IXP4XX_TIMER_REG(IXP4XX_OSST_OFFSET)
-
-/*
- * Timer register values and bit definitions 
- */
-#define IXP4XX_OST_ENABLE		0x00000001
-#define IXP4XX_OST_ONE_SHOT		0x00000002
-/* Low order bits of reload value ignored */
-#define IXP4XX_OST_RELOAD_MASK		0x00000003
-#define IXP4XX_OST_DISABLED		0x00000000
-#define IXP4XX_OSST_TIMER_1_PEND	0x00000001
-#define IXP4XX_OSST_TIMER_2_PEND	0x00000002
-#define IXP4XX_OSST_TIMER_TS_PEND	0x00000004
-#define IXP4XX_OSST_TIMER_WDOG_PEND	0x00000008
-#define IXP4XX_OSST_TIMER_WARM_RESET	0x00000010
-
-#define	IXP4XX_WDT_KEY			0x0000482E
-
-#define	IXP4XX_WDT_RESET_ENABLE		0x00000001
-#define	IXP4XX_WDT_IRQ_ENABLE		0x00000002
-#define	IXP4XX_WDT_COUNT_ENABLE		0x00000004
-
-
-/*
- * Constants to make it easy to access PCI Control/Status registers
- */
-#define PCI_NP_AD_OFFSET            0x00
-#define PCI_NP_CBE_OFFSET           0x04
-#define PCI_NP_WDATA_OFFSET         0x08
-#define PCI_NP_RDATA_OFFSET         0x0c
-#define PCI_CRP_AD_CBE_OFFSET       0x10
-#define PCI_CRP_WDATA_OFFSET        0x14
-#define PCI_CRP_RDATA_OFFSET        0x18
-#define PCI_CSR_OFFSET              0x1c
-#define PCI_ISR_OFFSET              0x20
-#define PCI_INTEN_OFFSET            0x24
-#define PCI_DMACTRL_OFFSET          0x28
-#define PCI_AHBMEMBASE_OFFSET       0x2c
-#define PCI_AHBIOBASE_OFFSET        0x30
-#define PCI_PCIMEMBASE_OFFSET       0x34
-#define PCI_AHBDOORBELL_OFFSET      0x38
-#define PCI_PCIDOORBELL_OFFSET      0x3C
-#define PCI_ATPDMA0_AHBADDR_OFFSET  0x40
-#define PCI_ATPDMA0_PCIADDR_OFFSET  0x44
-#define PCI_ATPDMA0_LENADDR_OFFSET  0x48
-#define PCI_ATPDMA1_AHBADDR_OFFSET  0x4C
-#define PCI_ATPDMA1_PCIADDR_OFFSET  0x50
-#define PCI_ATPDMA1_LENADDR_OFFSET	0x54
-
-/*
- * PCI Control/Status Registers
- */
-#define IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x)))
-
-#define PCI_NP_AD               IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET)
-#define PCI_NP_CBE              IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET)
-#define PCI_NP_WDATA            IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET)
-#define PCI_NP_RDATA            IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET)
-#define PCI_CRP_AD_CBE          IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
-#define PCI_CRP_WDATA           IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET)
-#define PCI_CRP_RDATA           IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET)
-#define PCI_CSR                 IXP4XX_PCI_CSR(PCI_CSR_OFFSET) 
-#define PCI_ISR                 IXP4XX_PCI_CSR(PCI_ISR_OFFSET)
-#define PCI_INTEN               IXP4XX_PCI_CSR(PCI_INTEN_OFFSET)
-#define PCI_DMACTRL             IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET)
-#define PCI_AHBMEMBASE          IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
-#define PCI_AHBIOBASE           IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET)
-#define PCI_PCIMEMBASE          IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
-#define PCI_AHBDOORBELL         IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
-#define PCI_PCIDOORBELL         IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
-#define PCI_ATPDMA0_AHBADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
-#define PCI_ATPDMA0_PCIADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
-#define PCI_ATPDMA0_LENADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
-#define PCI_ATPDMA1_AHBADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
-#define PCI_ATPDMA1_PCIADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
-#define PCI_ATPDMA1_LENADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
-
-/*
- * PCI register values and bit definitions 
- */
-
-/* CSR bit definitions */
-#define PCI_CSR_HOST    	0x00000001
-#define PCI_CSR_ARBEN   	0x00000002
-#define PCI_CSR_ADS     	0x00000004
-#define PCI_CSR_PDS     	0x00000008
-#define PCI_CSR_ABE     	0x00000010
-#define PCI_CSR_DBT     	0x00000020
-#define PCI_CSR_ASE     	0x00000100
-#define PCI_CSR_IC      	0x00008000
-
-/* ISR (Interrupt status) Register bit definitions */
-#define PCI_ISR_PSE     	0x00000001
-#define PCI_ISR_PFE     	0x00000002
-#define PCI_ISR_PPE     	0x00000004
-#define PCI_ISR_AHBE    	0x00000008
-#define PCI_ISR_APDC    	0x00000010
-#define PCI_ISR_PADC    	0x00000020
-#define PCI_ISR_ADB     	0x00000040
-#define PCI_ISR_PDB     	0x00000080
-
-/* INTEN (Interrupt Enable) Register bit definitions */
-#define PCI_INTEN_PSE   	0x00000001
-#define PCI_INTEN_PFE   	0x00000002
-#define PCI_INTEN_PPE   	0x00000004
-#define PCI_INTEN_AHBE  	0x00000008
-#define PCI_INTEN_APDC  	0x00000010
-#define PCI_INTEN_PADC  	0x00000020
-#define PCI_INTEN_ADB   	0x00000040
-#define PCI_INTEN_PDB   	0x00000080
-
-/*
- * Shift value for byte enable on NP cmd/byte enable register
- */
-#define IXP4XX_PCI_NP_CBE_BESL		4
-
-/*
- * PCI commands supported by NP access unit
- */
-#define NP_CMD_IOREAD			0x2
-#define NP_CMD_IOWRITE			0x3
-#define NP_CMD_CONFIGREAD		0xa
-#define NP_CMD_CONFIGWRITE		0xb
-#define NP_CMD_MEMREAD			0x6
-#define	NP_CMD_MEMWRITE			0x7
-
-/*
- * Constants for CRP access into local config space
- */
-#define CRP_AD_CBE_BESL         20
-#define CRP_AD_CBE_WRITE	0x00010000
-
-
-/*
- * USB Device Controller
- *
- * These are used by the USB gadget driver, so they don't follow the
- * IXP4XX_ naming convetions.
- *
- */
-# define IXP4XX_USB_REG(x)       (*((volatile u32 *)(x)))
-
-/* UDC Undocumented - Reserved1 */
-#define UDC_RES1	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0004)  
-/* UDC Undocumented - Reserved2 */
-#define UDC_RES2	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0008)  
-/* UDC Undocumented - Reserved3 */
-#define UDC_RES3	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x000C)  
-/* UDC Control Register */
-#define UDCCR		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000)  
-/* UDC Endpoint 0 Control/Status Register */
-#define UDCCS0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0010)  
-/* UDC Endpoint 1 (IN) Control/Status Register */
-#define UDCCS1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0014)  
-/* UDC Endpoint 2 (OUT) Control/Status Register */
-#define UDCCS2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0018)  
-/* UDC Endpoint 3 (IN) Control/Status Register */
-#define UDCCS3		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x001C)  
-/* UDC Endpoint 4 (OUT) Control/Status Register */
-#define UDCCS4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0020)  
-/* UDC Endpoint 5 (Interrupt) Control/Status Register */
-#define UDCCS5		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0024)  
-/* UDC Endpoint 6 (IN) Control/Status Register */
-#define UDCCS6		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0028)  
-/* UDC Endpoint 7 (OUT) Control/Status Register */
-#define UDCCS7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x002C)  
-/* UDC Endpoint 8 (IN) Control/Status Register */
-#define UDCCS8		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0030)  
-/* UDC Endpoint 9 (OUT) Control/Status Register */
-#define UDCCS9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0034)  
-/* UDC Endpoint 10 (Interrupt) Control/Status Register */
-#define UDCCS10		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0038)  
-/* UDC Endpoint 11 (IN) Control/Status Register */
-#define UDCCS11		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x003C)  
-/* UDC Endpoint 12 (OUT) Control/Status Register */
-#define UDCCS12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0040)  
-/* UDC Endpoint 13 (IN) Control/Status Register */
-#define UDCCS13		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0044)  
-/* UDC Endpoint 14 (OUT) Control/Status Register */
-#define UDCCS14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0048)  
-/* UDC Endpoint 15 (Interrupt) Control/Status Register */
-#define UDCCS15		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x004C)  
-/* UDC Frame Number Register High */
-#define UFNRH		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0060)  
-/* UDC Frame Number Register Low */
-#define UFNRL		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0064)  
-/* UDC Byte Count Reg 2 */
-#define UBCR2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0068)  
-/* UDC Byte Count Reg 4 */
-#define UBCR4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x006c)  
-/* UDC Byte Count Reg 7 */
-#define UBCR7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0070)  
-/* UDC Byte Count Reg 9 */
-#define UBCR9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0074)  
-/* UDC Byte Count Reg 12 */
-#define UBCR12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0078)  
-/* UDC Byte Count Reg 14 */
-#define UBCR14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x007c)  
-/* UDC Endpoint 0 Data Register */
-#define UDDR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0080)  
-/* UDC Endpoint 1 Data Register */
-#define UDDR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0100)  
-/* UDC Endpoint 2 Data Register */
-#define UDDR2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0180)  
-/* UDC Endpoint 3 Data Register */
-#define UDDR3		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0200)  
-/* UDC Endpoint 4 Data Register */
-#define UDDR4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0400)  
-/* UDC Endpoint 5 Data Register */
-#define UDDR5		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00A0)  
-/* UDC Endpoint 6 Data Register */
-#define UDDR6		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0600)  
-/* UDC Endpoint 7 Data Register */
-#define UDDR7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0680)  
-/* UDC Endpoint 8 Data Register */
-#define UDDR8		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0700)  
-/* UDC Endpoint 9 Data Register */
-#define UDDR9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0900)  
-/* UDC Endpoint 10 Data Register */
-#define UDDR10		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00C0)  
-/* UDC Endpoint 11 Data Register */
-#define UDDR11		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B00)  
-/* UDC Endpoint 12 Data Register */
-#define UDDR12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B80)  
-/* UDC Endpoint 13 Data Register */
-#define UDDR13		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0C00)  
-/* UDC Endpoint 14 Data Register */
-#define UDDR14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0E00)  
-/* UDC Endpoint 15 Data Register */
-#define UDDR15		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00E0)  
-/* UDC Interrupt Control Register 0 */
-#define UICR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0050)  
-/* UDC Interrupt Control Register 1 */
-#define UICR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0054)  
-/* UDC Status Interrupt Register 0 */
-#define USIR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0058)  
-/* UDC Status Interrupt Register 1 */
-#define USIR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x005C)  
-
-#define UDCCR_UDE	(1 << 0)	/* UDC enable */
-#define UDCCR_UDA	(1 << 1)	/* UDC active */
-#define UDCCR_RSM	(1 << 2)	/* Device resume */
-#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
-#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
-#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
-#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
-#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
-
-#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
-#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
-#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
-#define UDCCS0_SST	(1 << 4)	/* Sent stall */
-#define UDCCS0_FST	(1 << 5)	/* Force stall */
-#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
-#define UDCCS0_SA	(1 << 7)	/* Setup active */
-
-#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
-#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
-
-#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
-#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
-#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
-#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
-#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
-
-#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
-
-#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
-#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_IO_ROF	(1 << 3)	/* Receive overflow */
-#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
-#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
-#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
-
-#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
-#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
-
-#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
-#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
-#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
-#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
-#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
-#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
-#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
-#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
-
-#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
-#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
-#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
-#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
-#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
-#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
-#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
-#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
-
-#define USIR0_IR0	(1 << 0)	/* Interrupt request ep 0 */
-#define USIR0_IR1	(1 << 1)	/* Interrupt request ep 1 */
-#define USIR0_IR2	(1 << 2)	/* Interrupt request ep 2 */
-#define USIR0_IR3	(1 << 3)	/* Interrupt request ep 3 */
-#define USIR0_IR4	(1 << 4)	/* Interrupt request ep 4 */
-#define USIR0_IR5	(1 << 5)	/* Interrupt request ep 5 */
-#define USIR0_IR6	(1 << 6)	/* Interrupt request ep 6 */
-#define USIR0_IR7	(1 << 7)	/* Interrupt request ep 7 */
-
-#define USIR1_IR8	(1 << 0)	/* Interrupt request ep 8 */
-#define USIR1_IR9	(1 << 1)	/* Interrupt request ep 9 */
-#define USIR1_IR10	(1 << 2)	/* Interrupt request ep 10 */
-#define USIR1_IR11	(1 << 3)	/* Interrupt request ep 11 */
-#define USIR1_IR12	(1 << 4)	/* Interrupt request ep 12 */
-#define USIR1_IR13	(1 << 5)	/* Interrupt request ep 13 */
-#define USIR1_IR14	(1 << 6)	/* Interrupt request ep 14 */
-#define USIR1_IR15	(1 << 7)	/* Interrupt request ep 15 */
-
-#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
-
-/* "fuse" bits of IXP_EXP_CFG2 */
-#define IXP4XX_FEATURE_RCOMP		(1 << 0)
-#define IXP4XX_FEATURE_USB_DEVICE	(1 << 1)
-#define IXP4XX_FEATURE_HASH		(1 << 2)
-#define IXP4XX_FEATURE_AES		(1 << 3)
-#define IXP4XX_FEATURE_DES		(1 << 4)
-#define IXP4XX_FEATURE_HDLC		(1 << 5)
-#define IXP4XX_FEATURE_AAL		(1 << 6)
-#define IXP4XX_FEATURE_HSS		(1 << 7)
-#define IXP4XX_FEATURE_UTOPIA		(1 << 8)
-#define IXP4XX_FEATURE_NPEB_ETH0	(1 << 9)
-#define IXP4XX_FEATURE_NPEC_ETH		(1 << 10)
-#define IXP4XX_FEATURE_RESET_NPEA	(1 << 11)
-#define IXP4XX_FEATURE_RESET_NPEB	(1 << 12)
-#define IXP4XX_FEATURE_RESET_NPEC	(1 << 13)
-#define IXP4XX_FEATURE_PCI		(1 << 14)
-#define IXP4XX_FEATURE_ECC_TIMESYNC	(1 << 15)
-#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT	(3 << 16)
-#define IXP4XX_FEATURE_USB_HOST		(1 << 18)
-#define IXP4XX_FEATURE_NPEA_ETH		(1 << 19)
-#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3	(1 << 20)
-#define IXP4XX_FEATURE_RSA		(1 << 21)
-#define IXP4XX_FEATURE_XSCALE_MAX_FREQ	(3 << 22)
-#define IXP4XX_FEATURE_RESERVED		(0xFF << 24)
-
-#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC |	\
-				    IXP4XX_FEATURE_USB_HOST |		\
-				    IXP4XX_FEATURE_NPEA_ETH |		\
-				    IXP4XX_FEATURE_NPEB_ETH_1_TO_3 |	\
-				    IXP4XX_FEATURE_RSA |		\
-				    IXP4XX_FEATURE_XSCALE_MAX_FREQ)
-
-#endif
diff --git a/include/asm-arm/arch-ixp4xx/memory.h b/include/asm-arm/arch-ixp4xx/memory.h
deleted file mode 100644
index af9667b..0000000
--- a/include/asm-arm/arch-ixp4xx/memory.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/memory.h
- *
- * Copyright (c) 2001-2004 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x00000000)
-
-#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
-
-void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
-
-#define arch_adjust_zones(node, size, holes) \
-	ixp4xx_adjust_zones(node, size, holes)
-
-#define ISA_DMA_THRESHOLD (SZ_64M - 1)
-
-#endif
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- *
- * These are dummies for now.
- */
-#define __virt_to_bus(x)	 __virt_to_phys(x)
-#define __bus_to_virt(x)	 __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-ixp4xx/nas100d.h b/include/asm-arm/arch-ixp4xx/nas100d.h
deleted file mode 100644
index ecb12d6..0000000
--- a/include/asm-arm/arch-ixp4xx/nas100d.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/nas100d.h
- *
- * NAS100D platform specific definitions
- *
- * Copyright (c) 2005 Tower Technologies
- *
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- *
- * based on ixdp425.h:
- *	Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/arch/hardware.h>"
-#endif
-
-#define NAS100D_SDA_PIN		5
-#define NAS100D_SCL_PIN		6
-
-/*
- * NAS100D PCI IRQs
- */
-#define NAS100D_PCI_MAX_DEV	3
-#define NAS100D_PCI_IRQ_LINES	3
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define NAS100D_PCI_INTA_PIN	11
-#define NAS100D_PCI_INTB_PIN	10
-#define NAS100D_PCI_INTC_PIN	9
-#define NAS100D_PCI_INTD_PIN	8
-#define NAS100D_PCI_INTE_PIN	7
-
-/* Buttons */
-
-#define NAS100D_PB_GPIO         14   /* power button */
-#define NAS100D_RB_GPIO         4    /* reset button */
-
-/* Power control */
-
-#define NAS100D_PO_GPIO         12   /* power off */
-
-/* LEDs */
-
-#define NAS100D_LED_WLAN_GPIO	0
-#define NAS100D_LED_DISK_GPIO	3
-#define NAS100D_LED_PWR_GPIO	15
diff --git a/include/asm-arm/arch-ixp4xx/nslu2.h b/include/asm-arm/arch-ixp4xx/nslu2.h
deleted file mode 100644
index fa895f4..0000000
--- a/include/asm-arm/arch-ixp4xx/nslu2.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/nslu2.h
- *
- * NSLU2 platform specific definitions
- *
- * Author: Mark Rakes <mrakes AT mac.com>
- * Maintainers: http://www.nslu2-linux.org
- *
- * based on ixdp425.h:
- *	Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/arch/hardware.h>"
-#endif
-
-#define NSLU2_SDA_PIN		7
-#define NSLU2_SCL_PIN		6
-
-/*
- * NSLU2 PCI IRQs
- */
-#define NSLU2_PCI_MAX_DEV	3
-#define NSLU2_PCI_IRQ_LINES	3
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define NSLU2_PCI_INTA_PIN	11
-#define NSLU2_PCI_INTB_PIN	10
-#define NSLU2_PCI_INTC_PIN	9
-#define NSLU2_PCI_INTD_PIN	8
-
-/* NSLU2 Timer */
-#define NSLU2_FREQ 66000000
-
-/* Buttons */
-
-#define NSLU2_PB_GPIO		5	/* power button */
-#define NSLU2_PO_GPIO		8	/* power off */
-#define NSLU2_RB_GPIO		12	/* reset button */
-
-/* Buzzer */
-
-#define NSLU2_GPIO_BUZZ		4
-
-/* LEDs */
-
-#define NSLU2_LED_RED_GPIO	0
-#define NSLU2_LED_GRN_GPIO	1
-#define NSLU2_LED_DISK1_GPIO	3
-#define NSLU2_LED_DISK2_GPIO	2
diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h
deleted file mode 100644
index b2af515..0000000
--- a/include/asm-arm/arch-ixp4xx/platform.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/platform.h
- *
- * Constants and functions that are useful to IXP4xx platform-specific code
- * and device drivers.
- *
- * Copyright (C) 2004 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/arch/hardware.h>"
-#endif
-
-#ifndef __ASSEMBLY__
-
-#include <asm/types.h>
-
-#ifndef	__ARMEB__
-#define	REG_OFFSET	0
-#else
-#define	REG_OFFSET	3
-#endif
-
-/*
- * Expansion bus memory regions
- */
-#define IXP4XX_EXP_BUS_BASE_PHYS	(0x50000000)
-
-/*
- * The expansion bus on the IXP4xx can be configured for either 16 or
- * 32MB windows and the CS offset for each region changes based on the
- * current configuration. This means that we cannot simply hardcode
- * each offset. ixp4xx_sys_init() looks at the expansion bus configuration
- * as setup by the bootloader to determine our window size.
- */
-extern unsigned long ixp4xx_exp_bus_size;
-
-#define	IXP4XX_EXP_BUS_BASE(region)\
-		(IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
-
-#define IXP4XX_EXP_BUS_END(region)\
-		(IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1)
-
-/* Those macros can be used to adjust timing and configure
- * other features for each region.
- */
-
-#define IXP4XX_EXP_BUS_RECOVERY_T(x)	(((x) & 0x0f) << 16)
-#define IXP4XX_EXP_BUS_HOLD_T(x)	(((x) & 0x03) << 20)
-#define IXP4XX_EXP_BUS_STROBE_T(x)	(((x) & 0x0f) << 22)
-#define IXP4XX_EXP_BUS_SETUP_T(x)	(((x) & 0x03) << 26)
-#define IXP4XX_EXP_BUS_ADDR_T(x)	(((x) & 0x03) << 28)
-#define IXP4XX_EXP_BUS_SIZE(x)		(((x) & 0x0f) << 10)
-#define IXP4XX_EXP_BUS_CYCLES(x)	(((x) & 0x03) << 14)
-
-#define IXP4XX_EXP_BUS_CS_EN		(1L << 31)
-#define IXP4XX_EXP_BUS_BYTE_RD16	(1L << 6)
-#define IXP4XX_EXP_BUS_HRDY_POL		(1L << 5)
-#define IXP4XX_EXP_BUS_MUX_EN		(1L << 4)
-#define IXP4XX_EXP_BUS_SPLT_EN		(1L << 3)
-#define IXP4XX_EXP_BUS_WR_EN		(1L << 1)
-#define IXP4XX_EXP_BUS_BYTE_EN		(1L << 0)
-
-#define IXP4XX_EXP_BUS_CYCLES_INTEL	0x00
-#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA	0x01
-#define IXP4XX_EXP_BUS_CYCLES_HPI	0x02
-
-#define IXP4XX_FLASH_WRITABLE	(0x2)
-#define IXP4XX_FLASH_DEFAULT	(0xbcd23c40)
-#define IXP4XX_FLASH_WRITE	(0xbcd23c42)
-
-/*
- * Clock Speed Definitions.
- */
-#define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) /* 66Mhzi APB BUS   */ 
-#define IXP4XX_UART_XTAL        	14745600
-
-/*
- * This structure provide a means for the board setup code
- * to give information to th pata_ixp4xx driver. It is
- * passed as platform_data.
- */
-struct ixp4xx_pata_data {
-	volatile u32	*cs0_cfg;
-	volatile u32	*cs1_cfg;
-	unsigned long	cs0_bits;
-	unsigned long	cs1_bits;
-	void __iomem	*cs0;
-	void __iomem	*cs1;
-};
-
-struct sys_timer;
-
-#define IXP4XX_ETH_NPEA		0x00
-#define IXP4XX_ETH_NPEB		0x10
-#define IXP4XX_ETH_NPEC		0x20
-
-/* Information about built-in Ethernet MAC interfaces */
-struct eth_plat_info {
-	u8 phy;		/* MII PHY ID, 0 - 31 */
-	u8 rxq;		/* configurable, currently 0 - 31 only */
-	u8 txreadyq;
-	u8 hwaddr[6];
-};
-
-/* Information about built-in HSS (synchronous serial) interfaces */
-struct hss_plat_info {
-	int (*set_clock)(int port, unsigned int clock_type);
-	int (*open)(int port, void *pdev,
-		    void (*set_carrier_cb)(void *pdev, int carrier));
-	void (*close)(int port, void *pdev);
-	u8 txreadyq;
-};
-
-/*
- * Frequency of clock used for primary clocksource
- */
-extern unsigned long ixp4xx_timer_freq;
-
-/*
- * Functions used by platform-level setup code
- */
-extern void ixp4xx_map_io(void);
-extern void ixp4xx_init_irq(void);
-extern void ixp4xx_sys_init(void);
-extern void ixp4xx_timer_init(void);
-extern struct sys_timer ixp4xx_timer;
-extern void ixp4xx_pci_preinit(void);
-struct pci_sys_data;
-extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-
-/*
- * GPIO-functions
- */
-/*
- * The following converted to the real HW bits the gpio_line_config
- */
-/* GPIO pin types */
-#define IXP4XX_GPIO_OUT 		0x1
-#define IXP4XX_GPIO_IN  		0x2
-
-/* GPIO signal types */
-#define IXP4XX_GPIO_LOW			0
-#define IXP4XX_GPIO_HIGH		1
-
-/* GPIO Clocks */
-#define IXP4XX_GPIO_CLK_0		14
-#define IXP4XX_GPIO_CLK_1		15
-
-static inline void gpio_line_config(u8 line, u32 direction)
-{
-	if (direction == IXP4XX_GPIO_IN)
-		*IXP4XX_GPIO_GPOER |= (1 << line);
-	else
-		*IXP4XX_GPIO_GPOER &= ~(1 << line);
-}
-
-static inline void gpio_line_get(u8 line, int *value)
-{
-	*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
-}
-
-static inline void gpio_line_set(u8 line, int value)
-{
-	if (value == IXP4XX_GPIO_HIGH)
-	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
-	else if (value == IXP4XX_GPIO_LOW)
-	    *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
-}
-
-#endif // __ASSEMBLY__
-
diff --git a/include/asm-arm/arch-ixp4xx/prpmc1100.h b/include/asm-arm/arch-ixp4xx/prpmc1100.h
deleted file mode 100644
index 100855f..0000000
--- a/include/asm-arm/arch-ixp4xx/prpmc1100.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/prpmc1100.h
- *
- * Motorolla PrPMC1100 platform specific definitions
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista, Software, Inc. 
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/arch/hardware.h>"
-#endif
-
-#define	PRPMC1100_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
-#define	PRPMC1100_FLASH_SIZE	IXP4XX_EXP_BUS_CSX_REGION_SIZE
-
-#define	PRPMC1100_PCI_MIN_DEVID	10
-#define	PRPMC1100_PCI_MAX_DEVID	16
-#define	PRPMC1100_PCI_IRQ_LINES	4
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define PRPMC1100_PCI_INTA_PIN	11
-#define PRPMC1100_PCI_INTB_PIN	10
-#define	PRPMC1100_PCI_INTC_PIN	9
-#define	PRPMC1100_PCI_INTD_PIN	8
-
-
diff --git a/include/asm-arm/arch-ixp4xx/system.h b/include/asm-arm/arch-ixp4xx/system.h
deleted file mode 100644
index f11b922..0000000
--- a/include/asm-arm/arch-ixp4xx/system.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/system.h
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <asm/arch/hardware.h>
-
-static inline void arch_idle(void)
-{
-#if 0
-	if (!hlt_counter)
-		cpu_do_idle(0);
-#endif
-}
-
-
-static inline void arch_reset(char mode)
-{
-	if ( 1 && mode == 's') {
-		/* Jump into ROM at address 0 */
-		cpu_reset(0);
-	} else {
-		/* Use on-chip reset capability */
-
-		/* set the "key" register to enable access to
-		 * "timer" and "enable" registers
-		 */
-		*IXP4XX_OSWK = IXP4XX_WDT_KEY;
-
-		/* write 0 to the timer register for an immediate reset */
-		*IXP4XX_OSWT = 0;
-
-		*IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
-	}
-}
-
diff --git a/include/asm-arm/arch-ixp4xx/timex.h b/include/asm-arm/arch-ixp4xx/timex.h
deleted file mode 100644
index c2559e2..0000000
--- a/include/asm-arm/arch-ixp4xx/timex.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/timex.h
- * 
- */
-
-#include <asm/arch/hardware.h>
-
-/*
- * We use IXP425 General purpose timer for our timer needs, it runs at 
- * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
- * timer register ignores the bottom 2 bits of the LATCH value.
- */
-#define FREQ 66666666
-#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-
diff --git a/include/asm-arm/arch-ixp4xx/udc.h b/include/asm-arm/arch-ixp4xx/udc.h
deleted file mode 100644
index dbdec36f..0000000
--- a/include/asm-arm/arch-ixp4xx/udc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/udc.h
- *
- */
-#include <asm/mach/udc_pxa2xx.h>
-
-extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info);
-
diff --git a/include/asm-arm/arch-ixp4xx/uncompress.h b/include/asm-arm/arch-ixp4xx/uncompress.h
deleted file mode 100644
index 34ef48f..0000000
--- a/include/asm-arm/arch-ixp4xx/uncompress.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/uncompress.h 
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _ARCH_UNCOMPRESS_H_
-#define _ARCH_UNCOMPRESS_H_
-
-#include "ixp4xx-regs.h"
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-
-#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
-
-static volatile u32* uart_base;
-
-static inline void putc(int c)
-{
-	/* Check THRE and TEMT bits before we transmit the character.
-	 */
-	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-
-	*uart_base = c;
-}
-
-static void flush(void)
-{
-}
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
-	/*
-	 * Some boards are using UART2 as console
-	 */
-	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
-			 machine_is_gateway7001() || machine_is_wg302v2())
-		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
-	else
-		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
-}
-
-/*
- * arch_id is a variable in decompress_kernel()
- */
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-
-#define arch_decomp_wdog()
-
-#endif
diff --git a/include/asm-arm/arch-ixp4xx/vmalloc.h b/include/asm-arm/arch-ixp4xx/vmalloc.h
deleted file mode 100644
index 050d46e..0000000
--- a/include/asm-arm/arch-ixp4xx/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/vmalloc.h
- */
-#define VMALLOC_END       (0xFF000000)
-
diff --git a/include/asm-arm/arch-kirkwood/debug-macro.S b/include/asm-arm/arch-kirkwood/debug-macro.S
deleted file mode 100644
index f55fb8a..0000000
--- a/include/asm-arm/arch-kirkwood/debug-macro.S
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/kirkwood.h>
-
-	.macro	addruart,rx
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =KIRKWOOD_REGS_PHYS_BASE
-	ldrne	\rx, =KIRKWOOD_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-kirkwood/entry-macro.S b/include/asm-arm/arch-kirkwood/entry-macro.S
deleted file mode 100644
index fc6a43d93..0000000
--- a/include/asm-arm/arch-kirkwood/entry-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell Kirkwood platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/arch/kirkwood.h>
-
-	.macro  disable_fiq
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IRQ_VIRT_BASE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ check low interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
-	mov	\irqnr, #31
-	ands	\irqstat, \irqstat, \tmp
-	bne	1001f
-
-	@ if no low interrupts set, check high interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
-	mov	\irqnr, #63
-	ands	\irqstat, \irqstat, \tmp
-
-	@ find first active interrupt source
-1001:	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm
diff --git a/include/asm-arm/arch-kirkwood/hardware.h b/include/asm-arm/arch-kirkwood/hardware.h
deleted file mode 100644
index e695719..0000000
--- a/include/asm-arm/arch-kirkwood/hardware.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "kirkwood.h"
-
-#define pcibios_assign_all_busses()	1
-
-#define PCIBIOS_MIN_IO			0x00001000
-#define PCIBIOS_MIN_MEM			0x01000000
-#define PCIMEM_BASE			KIRKWOOD_PCIE_MEM_PHYS_BASE /* mem base for VGA */
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/io.h b/include/asm-arm/arch-kirkwood/io.h
deleted file mode 100644
index 0ef6e95..0000000
--- a/include/asm-arm/arch-kirkwood/io.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "kirkwood.h"
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE)
-					+ KIRKWOOD_PCIE_IO_VIRT_BASE);
-}
-
-#define __io(a)			__io(a)
-#define __mem_pci(a)		(a)
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/irqs.h b/include/asm-arm/arch-kirkwood/irqs.h
deleted file mode 100644
index 2e7b5da..0000000
--- a/include/asm-arm/arch-kirkwood/irqs.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/irqs.h
- *
- * IRQ definitions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include "kirkwood.h"	/* need GPIO_MAX */
-
-/*
- * Low Interrupt Controller
- */
-#define IRQ_KIRKWOOD_HIGH_SUM	0
-#define IRQ_KIRKWOOD_BRIDGE	1
-#define IRQ_KIRKWOOD_HOST2CPU	2
-#define IRQ_KIRKWOOD_CPU2HOST	3
-#define IRQ_KIRKWOOD_XOR_00	5
-#define IRQ_KIRKWOOD_XOR_01	6
-#define IRQ_KIRKWOOD_XOR_10	7
-#define IRQ_KIRKWOOD_XOR_11	8
-#define IRQ_KIRKWOOD_PCIE	9
-#define IRQ_KIRKWOOD_GE00_SUM	11
-#define IRQ_KIRKWOOD_GE01_SUM	15
-#define IRQ_KIRKWOOD_USB	19
-#define IRQ_KIRKWOOD_SATA	21
-#define IRQ_KIRKWOOD_CRYPTO	22
-#define IRQ_KIRKWOOD_SPI	23
-#define IRQ_KIRKWOOD_I2S	24
-#define IRQ_KIRKWOOD_TS_0	26
-#define IRQ_KIRKWOOD_SDIO	28
-#define IRQ_KIRKWOOD_TWSI	29
-#define IRQ_KIRKWOOD_AVB	30
-#define IRQ_KIRKWOOD_TDMI	31
-
-/*
- * High Interrupt Controller
- */
-#define IRQ_KIRKWOOD_UART_0	33
-#define IRQ_KIRKWOOD_UART_1	34
-#define IRQ_KIRKWOOD_GPIO_LOW_0_7	35
-#define IRQ_KIRKWOOD_GPIO_LOW_8_15	36
-#define IRQ_KIRKWOOD_GPIO_LOW_16_23	37
-#define IRQ_KIRKWOOD_GPIO_LOW_24_31	38
-#define IRQ_KIRKWOOD_GPIO_HIGH_0_7	39
-#define IRQ_KIRKWOOD_GPIO_HIGH_8_15	40
-#define IRQ_KIRKWOOD_GPIO_HIGH_16_23	41
-
-/*
- * KIRKWOOD General Purpose Pins
- */
-#define IRQ_KIRKWOOD_GPIO_START	64
-#define NR_GPIO_IRQS		GPIO_MAX
-
-#define NR_IRQS			(IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/kirkwood.h b/include/asm-arm/arch-kirkwood/kirkwood.h
deleted file mode 100644
index bb31b315..0000000
--- a/include/asm-arm/arch-kirkwood/kirkwood.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/kirkwood.h
- *
- * Generic definitions for Marvell Kirkwood SoC flavors:
- *  88F6180, 88F6192 and 88F6281.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_KIRKWOOD_H
-#define __ASM_ARCH_KIRKWOOD_H
-
-/*
- * Marvell Kirkwood address maps.
- *
- * phys
- * e0000000	PCIe Memory space
- * f1000000	on-chip peripheral registers
- * f2000000	PCIe I/O space
- * f3000000	NAND controller address window
- *
- * virt		phys		size
- * fee00000	f1000000	1M	on-chip peripheral registers
- * fef00000	f2000000	1M	PCIe I/O space
- */
-
-#define KIRKWOOD_NAND_MEM_PHYS_BASE	0xf3000000
-#define KIRKWOOD_NAND_MEM_SIZE		SZ_64K /* 1K is sufficient, but 64K
-						* is the minimal window size
-						*/
-
-#define KIRKWOOD_PCIE_IO_PHYS_BASE	0xf2000000
-#define KIRKWOOD_PCIE_IO_VIRT_BASE	0xfef00000
-#define KIRKWOOD_PCIE_IO_BUS_BASE	0x00000000
-#define KIRKWOOD_PCIE_IO_SIZE		SZ_1M
-
-#define KIRKWOOD_REGS_PHYS_BASE		0xf1000000
-#define KIRKWOOD_REGS_VIRT_BASE		0xfee00000
-#define KIRKWOOD_REGS_SIZE		SZ_1M
-
-#define KIRKWOOD_PCIE_MEM_PHYS_BASE	0xe0000000
-#define KIRKWOOD_PCIE_MEM_SIZE		SZ_128M
-
-/*
- * MBUS bridge registers.
- */
-#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
-#define  CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
-#define   CPU_RESET		0x00000002
-#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-#define   SOFT_RESET_OUT_EN	0x00000004
-#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-#define   SOFT_RESET		0x00000001
-#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-#define   BRIDGE_INT_TIMER0	0x0002
-#define   BRIDGE_INT_TIMER1	0x0004
-#define   BRIDGE_INT_TIMER1_CLR	(~0x0004)
-#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-#define   IRQ_CAUSE_LOW_OFF	0x0000
-#define   IRQ_MASK_LOW_OFF	0x0004
-#define   IRQ_CAUSE_HIGH_OFF	0x0010
-#define   IRQ_MASK_HIGH_OFF	0x0014
-#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
-#define  L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
-#define   L2_WRITETHROUGH	0x00000010
-
-/*
- * Register Map
- */
-#define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x00000)
-#define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE | 0x1500)
-
-#define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x10000)
-#define  SAMPLE_AT_RESET	(DEV_BUS_VIRT_BASE | 0x0030)
-#define  DEVICE_ID		(DEV_BUS_VIRT_BASE | 0x0034)
-#define  RTC_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0300)
-#define  SPI_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0600)
-#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
-
-#define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
-
-#define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
-
-#define GE00_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x70000)
-#define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x74000)
-
-#define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x80000)
-
-
-#define GPIO_MAX		50
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/memory.h b/include/asm-arm/arch-kirkwood/memory.h
deleted file mode 100644
index e5108f4..0000000
--- a/include/asm-arm/arch-kirkwood/memory.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET		UL(0x00000000)
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/system.h b/include/asm-arm/arch-kirkwood/system.h
deleted file mode 100644
index 8dde7e3..0000000
--- a/include/asm-arm/arch-kirkwood/system.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/kirkwood.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	/*
-	 * Enable soft reset to assert RSTOUTn.
-	 */
-	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
-	/*
-	 * Assert soft reset.
-	 */
-	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
-	while (1)
-		;
-}
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/timex.h b/include/asm-arm/arch-kirkwood/timex.h
deleted file mode 100644
index 82122e1..0000000
--- a/include/asm-arm/arch-kirkwood/timex.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE		(100 * HZ)
-
-#define KIRKWOOD_TCLK		166666667
diff --git a/include/asm-arm/arch-kirkwood/uncompress.h b/include/asm-arm/arch-kirkwood/uncompress.h
deleted file mode 100644
index a9062b6d..0000000
--- a/include/asm-arm/arch-kirkwood/uncompress.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/arch/kirkwood.h>
-
-#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
-	unsigned char *base = SERIAL_BASE;
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		if (base[UART_LSR << 2] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
-	unsigned char *base = SERIAL_BASE;
-	unsigned char mask;
-	int i;
-
-	mask = UART_LSR_TEMT | UART_LSR_THRE;
-
-	for (i = 0; i < 0x1000; i++) {
-		if ((base[UART_LSR << 2] & mask) == mask)
-			break;
-		barrier();
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-kirkwood/vmalloc.h b/include/asm-arm/arch-kirkwood/vmalloc.h
deleted file mode 100644
index 41852c6..0000000
--- a/include/asm-arm/arch-kirkwood/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe800000
diff --git a/include/asm-arm/arch-ks8695/debug-macro.S b/include/asm-arm/arch-ks8695/debug-macro.S
deleted file mode 100644
index d2583ff..0000000
--- a/include/asm-arm/arch-ks8695/debug-macro.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/debug-macro.S
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Debug macros
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/regs-uart.h>
-
-	.macro	addruart, rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1				@ MMU enabled?
-		ldreq	\rx, =KS8695_UART_PA		@ physical base address
-		ldrne	\rx, =KS8695_UART_VA		@ virtual base address
-	.endm
-
-	.macro	senduart, rd, rx
-		str	\rd, [\rx, #KS8695_URTH]	@ Write to Transmit Holding Register
-	.endm
-
-	.macro	busyuart, rd, rx
-1001:		ldr	\rd, [\rx, #KS8695_URLS]	@ Read Line Status Register
-		tst	\rd, #URLS_URTE			@ Holding & Shift registers empty?
-		beq	1001b
-	.endm
-
-	.macro	waituart, rd, rx
-1001:		ldr	\rd, [\rx, #KS8695_URLS]	@ Read Line Status Register
-		tst	\rd, #URLS_URTHRE		@ Holding Register empty?
-		beq	1001b
-	.endm
diff --git a/include/asm-arm/arch-ks8695/devices.h b/include/asm-arm/arch-ks8695/devices.h
deleted file mode 100644
index 7ad2c65..0000000
--- a/include/asm-arm/arch-ks8695/devices.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/devices.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_DEVICES_H
-#define __ASM_ARCH_DEVICES_H
-
-#include <linux/pci.h>
-
- /* Ethernet */
-extern void __init ks8695_add_device_wan(void);
-extern void __init ks8695_add_device_lan(void);
-extern void __init ks8695_add_device_hpna(void);
-
- /* LEDs */
-extern short ks8695_leds_cpu;
-extern short ks8695_leds_timer;
-extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
-
- /* PCI */
-#define KS8695_MODE_PCI		0
-#define KS8695_MODE_MINIPCI	1
-#define KS8695_MODE_CARDBUS	2
-
-struct ks8695_pci_cfg {
-	short mode;
-	int (*map_irq)(struct pci_dev *, u8, u8);
-};
-extern __init void ks8695_init_pci(struct ks8695_pci_cfg *);
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/dma.h b/include/asm-arm/arch-ks8695/dma.h
deleted file mode 100644
index e5159ed..0000000
--- a/include/asm-arm/arch-ks8695/dma.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/dma.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-ks8695/entry-macro.S b/include/asm-arm/arch-ks8695/entry-macro.S
deleted file mode 100644
index 3993cfe..0000000
--- a/include/asm-arm/arch-ks8695/entry-macro.S
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/entry-macro.S
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * Low-level IRQ helper macros for KS8695
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/regs-irq.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =KS8695_IRQ_VA			@ Base address of interrupt controller
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base, #KS8695_INTMS]	@ Mask Status register
-
-		teq	\irqstat, #0
-		beq	1001f
-
-		mov	\irqnr, #0
-
-		tst	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tsteq	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tsteq	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tst	\irqstat, #0x0f
-		moveq	\irqstat, \irqstat, lsr #4
-		addeq	\irqnr, \irqnr, #4
-		tst	\irqstat, #0x03
-		moveq	\irqstat, \irqstat, lsr #2
-		addeq	\irqnr, \irqnr, #2
-		tst	\irqstat, #0x01
-		addeqs	\irqnr, \irqnr, #1
-1001:
-	.endm
diff --git a/include/asm-arm/arch-ks8695/gpio.h b/include/asm-arm/arch-ks8695/gpio.h
deleted file mode 100644
index 65ceea2..0000000
--- a/include/asm-arm/arch-ks8695/gpio.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/gpio.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_GPIO_H_
-#define __ASM_ARCH_GPIO_H_
-
-#define KS8695_GPIO_0		0
-#define KS8695_GPIO_1		1
-#define KS8695_GPIO_2		2
-#define KS8695_GPIO_3		3
-#define KS8695_GPIO_4		4
-#define KS8695_GPIO_5		5
-#define KS8695_GPIO_6		6
-#define KS8695_GPIO_7		7
-#define KS8695_GPIO_8		8
-#define KS8695_GPIO_9		9
-#define KS8695_GPIO_10		10
-#define KS8695_GPIO_11		11
-#define KS8695_GPIO_12		12
-#define KS8695_GPIO_13		13
-#define KS8695_GPIO_14		14
-#define KS8695_GPIO_15		15
-
-
-/*
- * Configure GPIO pin as external interrupt source.
- */
-int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
-
-/*
- * Configure the GPIO line as an input.
- */
-int __init_or_module gpio_direction_input(unsigned int pin);
-
-/*
- * Configure the GPIO line as an output, with default state.
- */
-int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state);
-
-/*
- * Set the state of an output GPIO line.
- */
-void gpio_set_value(unsigned int pin, unsigned int state);
-
-/*
- * Read the state of a GPIO line.
- */
-int gpio_get_value(unsigned int pin);
-
-/*
- * Map GPIO line to IRQ number.
- */
-int gpio_to_irq(unsigned int pin);
-
-/*
- * Map IRQ number to GPIO line.
- */
-int irq_to_gpio(unsigned int irq);
-
-
-#include <asm-generic/gpio.h>
-
-static inline int gpio_request(unsigned int pin, const char *label)
-{
-	return 0;
-}
-
-static inline void gpio_free(unsigned int pin)
-{
-}
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/hardware.h b/include/asm-arm/arch-ks8695/hardware.h
deleted file mode 100644
index cb732bf..0000000
--- a/include/asm-arm/arch-ks8695/hardware.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/hardware.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Memory Map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical RAM address.
- */
-#define KS8695_SDRAM_PA		0x00000000
-
-
-/*
- * We map an entire MiB with the System Configuration Registers in even
- * though only 64KiB is needed. This makes it easier for use with the
- * head debug code as the initial MMU setup only deals in L1 sections.
- */
-#define KS8695_IO_PA		0x03F00000
-#define KS8695_IO_VA		0xF0000000
-#define KS8695_IO_SIZE		SZ_1M
-
-#define KS8695_PCIMEM_PA	0x60000000
-#define KS8695_PCIMEM_SIZE	SZ_512M
-
-#define KS8695_PCIIO_PA		0x80000000
-#define KS8695_PCIIO_SIZE	SZ_64K
-
-
-/*
- * PCI support
- */
-#define pcibios_assign_all_busses()	1
-
-#define PCIBIOS_MIN_IO		0
-#define PCIBIOS_MIN_MEM		0
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/io.h b/include/asm-arm/arch-ks8695/io.h
deleted file mode 100644
index 8edc4bd..0000000
--- a/include/asm-arm/arch-ks8695/io.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/io.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/irqs.h b/include/asm-arm/arch-ks8695/irqs.h
deleted file mode 100644
index 8b1c4fe..0000000
--- a/include/asm-arm/arch-ks8695/irqs.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ks8695/irqs.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-
-#define NR_IRQS				32
-
-/*
- * IRQ definitions
- */
-#define KS8695_IRQ_COMM_RX		0
-#define KS8695_IRQ_COMM_TX		1
-#define KS8695_IRQ_EXTERN0		2
-#define KS8695_IRQ_EXTERN1		3
-#define KS8695_IRQ_EXTERN2		4
-#define KS8695_IRQ_EXTERN3		5
-#define KS8695_IRQ_TIMER0		6
-#define KS8695_IRQ_TIMER1		7
-#define KS8695_IRQ_UART_TX		8
-#define KS8695_IRQ_UART_RX		9
-#define KS8695_IRQ_UART_LINE_STATUS	10
-#define KS8695_IRQ_UART_MODEM_STATUS	11
-#define KS8695_IRQ_LAN_RX_STOP		12
-#define KS8695_IRQ_LAN_TX_STOP		13
-#define KS8695_IRQ_LAN_RX_BUF		14
-#define KS8695_IRQ_LAN_TX_BUF		15
-#define KS8695_IRQ_LAN_RX_STATUS	16
-#define KS8695_IRQ_LAN_TX_STATUS	17
-#define KS8695_IRQ_HPNA_RX_STOP		18
-#define KS8695_IRQ_HPNA_TX_STOP		19
-#define KS8695_IRQ_HPNA_RX_BUF		20
-#define KS8695_IRQ_HPNA_TX_BUF		21
-#define KS8695_IRQ_HPNA_RX_STATUS	22
-#define KS8695_IRQ_HPNA_TX_STATUS	23
-#define KS8695_IRQ_BUS_ERROR		24
-#define KS8695_IRQ_WAN_RX_STOP		25
-#define KS8695_IRQ_WAN_TX_STOP		26
-#define KS8695_IRQ_WAN_RX_BUF		27
-#define KS8695_IRQ_WAN_TX_BUF		28
-#define KS8695_IRQ_WAN_RX_STATUS	29
-#define KS8695_IRQ_WAN_TX_STATUS	30
-#define KS8695_IRQ_WAN_LINK		31
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/memory.h b/include/asm-arm/arch-ks8695/memory.h
deleted file mode 100644
index 1b542f7..0000000
--- a/include/asm-arm/arch-ks8695/memory.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/memory.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 Memory definitions
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/arch/hardware.h>
-
-/*
- * Physical SRAM offset.
- */
-#define PHYS_OFFSET		KS8695_SDRAM_PA
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_PCI
-
-/* PCI mappings */
-#define __virt_to_bus(x)	((x) - PAGE_OFFSET + KS8695_PCIMEM_PA)
-#define __bus_to_virt(x)	((x) - KS8695_PCIMEM_PA + PAGE_OFFSET)
-
-/* Platform-bus mapping */
-extern struct bus_type platform_bus_type;
-#define is_lbus_device(dev)		(dev && dev->bus == &platform_bus_type)
-#define __arch_dma_to_virt(dev, x)	({ is_lbus_device(dev) ? \
-					__phys_to_virt(x) : __bus_to_virt(x); })
-#define __arch_virt_to_dma(dev, x)	({ is_lbus_device(dev) ? \
-					(dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
-#define __arch_page_to_dma(dev, x)	__arch_virt_to_dma(dev, page_address(x))
-
-#else
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-#endif
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-gpio.h b/include/asm-arm/arch-ks8695/regs-gpio.h
deleted file mode 100644
index 6b95d77..0000000
--- a/include/asm-arm/arch-ks8695/regs-gpio.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-gpio.h
- *
- * Copyright (C) 2007 Andrew Victor
- *
- * KS8695 - GPIO control registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_GPIO_H
-#define KS8695_GPIO_H
-
-#define KS8695_GPIO_OFFSET	(0xF0000 + 0xE600)
-#define KS8695_GPIO_VA		(KS8695_IO_VA + KS8695_GPIO_OFFSET)
-#define KS8695_GPIO_PA		(KS8695_IO_PA + KS8695_GPIO_OFFSET)
-
-
-#define KS8695_IOPM		(0x00)		/* I/O Port Mode Register */
-#define KS8695_IOPC		(0x04)		/* I/O Port Control Register */
-#define KS8695_IOPD		(0x08)		/* I/O Port Data Register */
-
-
-/* Port Mode Register */
-#define IOPM_(x)		(1 << (x))	/* Mode for GPIO Pin x */
-
-/* Port Control Register */
-#define IOPC_IOTIM1EN		(1 << 17)	/* GPIO Pin for Timer1 Enable */
-#define IOPC_IOTIM0EN		(1 << 16)	/* GPIO Pin for Timer0 Enable */
-#define IOPC_IOEINT3EN		(1 << 15)	/* GPIO Pin for External/Soft Interrupt 3 Enable */
-#define IOPC_IOEINT3TM		(7 << 12)	/* GPIO Pin for External/Soft Interrupt 3 Trigger Mode */
-#define IOPC_IOEINT3_MODE(x)	((x) << 12)
-#define IOPC_IOEINT2EN		(1 << 11)	/* GPIO Pin for External/Soft Interrupt 2 Enable */
-#define IOPC_IOEINT2TM		(7 << 8)	/* GPIO Pin for External/Soft Interrupt 2 Trigger Mode */
-#define IOPC_IOEINT2_MODE(x)	((x) << 8)
-#define IOPC_IOEINT1EN		(1 << 7)	/* GPIO Pin for External/Soft Interrupt 1 Enable */
-#define IOPC_IOEINT1TM		(7 << 4)	/* GPIO Pin for External/Soft Interrupt 1 Trigger Mode */
-#define IOPC_IOEINT1_MODE(x)	((x) << 4)
-#define IOPC_IOEINT0EN		(1 << 3)	/* GPIO Pin for External/Soft Interrupt 0 Enable */
-#define IOPC_IOEINT0TM		(7 << 0)	/* GPIO Pin for External/Soft Interrupt 0 Trigger Mode */
-#define IOPC_IOEINT0_MODE(x)	((x) << 0)
-
- /* Trigger Modes */
-#define IOPC_TM_LOW		(0)		/* Level Detection (Active Low) */
-#define IOPC_TM_HIGH		(1)		/* Level Detection (Active High) */
-#define IOPC_TM_RISING		(2)		/* Rising Edge Detection */
-#define IOPC_TM_FALLING		(4)		/* Falling Edge Detection */
-#define IOPC_TM_EDGE		(6)		/* Both Edge Detection */
-
-/* Port Data Register */
-#define IOPD_(x)		(1 << (x))	/* Signal Level of GPIO Pin x */
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-hpna.h b/include/asm-arm/arch-ks8695/regs-hpna.h
deleted file mode 100644
index 14091cd..0000000
--- a/include/asm-arm/arch-ks8695/regs-hpna.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-wan.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - HPNA Registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_HPNA_H
-#define KS8695_HPNA_H
-
-#define KS8695_HPNA_OFFSET	(0xF0000 + 0xA000)
-#define KS8695_HPNA_VA		(KS8695_IO_VA + KS8695_HPNA_OFFSET)
-#define KS8695_HPNA_PA		(KS8695_IO_PA + KS8695_HPNA_OFFSET)
-
-
-/*
- * HPNA registers
- */
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-irq.h b/include/asm-arm/arch-ks8695/regs-irq.h
deleted file mode 100644
index 70b193f..0000000
--- a/include/asm-arm/arch-ks8695/regs-irq.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-irq.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - IRQ registers and bit definitions
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_IRQ_H
-#define KS8695_IRQ_H
-
-#define KS8695_IRQ_OFFSET	(0xF0000 + 0xE200)
-#define KS8695_IRQ_VA		(KS8695_IO_VA + KS8695_IRQ_OFFSET)
-#define KS8695_IRQ_PA		(KS8695_IO_PA + KS8695_IRQ_OFFSET)
-
-
-/*
- * Interrupt Controller registers
- */
-#define KS8695_INTMC		(0x00)		/* Mode Control Register */
-#define KS8695_INTEN		(0x04)		/* Interrupt Enable Register */
-#define KS8695_INTST		(0x08)		/* Interrupt Status Register */
-#define KS8695_INTPW		(0x0c)		/* Interrupt Priority (WAN MAC) */
-#define KS8695_INTPH		(0x10)		/* Interrupt Priority (HPNA) [KS8695 only] */
-#define KS8695_INTPL		(0x14)		/* Interrupt Priority (LAN MAC) */
-#define KS8695_INTPT		(0x18)		/* Interrupt Priority (Timer) */
-#define KS8695_INTPU		(0x1c)		/* Interrupt Priority (UART) */
-#define KS8695_INTPE		(0x20)		/* Interrupt Priority (External Interrupt) */
-#define KS8695_INTPC		(0x24)		/* Interrupt Priority (Communications Channel) */
-#define KS8695_INTPBE		(0x28)		/* Interrupt Priority (Bus Error Response) */
-#define KS8695_INTMS		(0x2c)		/* Interrupt Mask Status Register */
-#define KS8695_INTHPF		(0x30)		/* Interrupt Pending Highest Priority (FIQ) */
-#define KS8695_INTHPI		(0x34)		/* Interrupt Pending Highest Priority (IRQ) */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-lan.h b/include/asm-arm/arch-ks8695/regs-lan.h
deleted file mode 100644
index a63bd61..0000000
--- a/include/asm-arm/arch-ks8695/regs-lan.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-lan.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - LAN Registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_LAN_H
-#define KS8695_LAN_H
-
-#define KS8695_LAN_OFFSET	(0xF0000 + 0x8000)
-#define KS8695_LAN_VA		(KS8695_IO_VA + KS8695_LAN_OFFSET)
-#define KS8695_LAN_PA		(KS8695_IO_PA + KS8695_LAN_OFFSET)
-
-
-/*
- * LAN registers
- */
-#define KS8695_LMDTXC		(0x00)		/* DMA Transmit Control */
-#define KS8695_LMDRXC		(0x04)		/* DMA Receive Control */
-#define KS8695_LMDTSC		(0x08)		/* DMA Transmit Start Command */
-#define KS8695_LMDRSC		(0x0c)		/* DMA Receive Start Command */
-#define KS8695_LTDLB		(0x10)		/* Transmit Descriptor List Base Address */
-#define KS8695_LRDLB		(0x14)		/* Receive Descriptor List Base Address */
-#define KS8695_LMAL		(0x18)		/* MAC Station Address Low */
-#define KS8695_LMAH		(0x1c)		/* MAC Station Address High */
-#define KS8695_LMAAL_(n)	(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
-#define KS8695_LMAAH_(n)	(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
-
-
-/* DMA Transmit Control Register */
-#define LMDTXC_LMTRST		(1    << 31)	/* Soft Reset */
-#define LMDTXC_LMTBS		(0x3f << 24)	/* Transmit Burst Size */
-#define LMDTXC_LMTUCG		(1    << 18)	/* Transmit UDP Checksum Generate */
-#define LMDTXC_LMTTCG		(1    << 17)	/* Transmit TCP Checksum Generate */
-#define LMDTXC_LMTICG		(1    << 16)	/* Transmit IP Checksum Generate */
-#define LMDTXC_LMTFCE		(1    <<  9)	/* Transmit Flow Control Enable */
-#define LMDTXC_LMTLB		(1    <<  8)	/* Loopback mode */
-#define LMDTXC_LMTEP		(1    <<  2)	/* Transmit Enable Padding */
-#define LMDTXC_LMTAC		(1    <<  1)	/* Transmit Add CRC */
-#define LMDTXC_LMTE		(1    <<  0)	/* TX Enable */
-
-/* DMA Receive Control Register */
-#define LMDRXC_LMRBS		(0x3f << 24)	/* Receive Burst Size */
-#define LMDRXC_LMRUCC		(1    << 18)	/* Receive UDP Checksum check */
-#define LMDRXC_LMRTCG		(1    << 17)	/* Receive TCP Checksum check */
-#define LMDRXC_LMRICG		(1    << 16)	/* Receive IP Checksum check */
-#define LMDRXC_LMRFCE		(1    <<  9)	/* Receive Flow Control Enable */
-#define LMDRXC_LMRB		(1    <<  6)	/* Receive Broadcast */
-#define LMDRXC_LMRM		(1    <<  5)	/* Receive Multicast */
-#define LMDRXC_LMRU		(1    <<  4)	/* Receive Unicast */
-#define LMDRXC_LMRERR		(1    <<  3)	/* Receive Error Frame */
-#define LMDRXC_LMRA		(1    <<  2)	/* Receive All */
-#define LMDRXC_LMRE		(1    <<  1)	/* RX Enable */
-
-/* Additional Station Address High */
-#define LMAAH_E			(1    << 31)	/* Address Enabled */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-mem.h b/include/asm-arm/arch-ks8695/regs-mem.h
deleted file mode 100644
index 76b38e08..0000000
--- a/include/asm-arm/arch-ks8695/regs-mem.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-mem.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - Memory Controller registers and bit definitions
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_MEM_H
-#define KS8695_MEM_H
-
-#define KS8695_MEM_OFFSET	(0xF0000 + 0x4000)
-#define KS8695_MEM_VA		(KS8695_IO_VA + KS8695_MEM_OFFSET)
-#define KS8695_MEM_PA		(KS8695_IO_PA + KS8695_MEM_OFFSET)
-
-
-/*
- * Memory Controller Registers
- */
-#define KS8695_EXTACON0		(0x00)		/* External I/O 0 Access Control */
-#define KS8695_EXTACON1		(0x04)		/* External I/O 1 Access Control */
-#define KS8695_EXTACON2		(0x08)		/* External I/O 2 Access Control */
-#define KS8695_ROMCON0		(0x10)		/* ROM/SRAM/Flash 1 Control Register */
-#define KS8695_ROMCON1		(0x14)		/* ROM/SRAM/Flash 2 Control Register */
-#define KS8695_ERGCON		(0x20)		/* External I/O and ROM/SRAM/Flash General Register */
-#define KS8695_SDCON0		(0x30)		/* SDRAM Control Register 0 */
-#define KS8695_SDCON1		(0x34)		/* SDRAM Control Register 1 */
-#define KS8695_SDGCON		(0x38)		/* SDRAM General Control */
-#define KS8695_SDBCON		(0x3c)		/* SDRAM Buffer Control */
-#define KS8695_REFTIM		(0x40)		/* SDRAM Refresh Timer */
-
-
-/* External I/O Access Control Registers */
-#define EXTACON_EBNPTR		(0x3ff << 22)		/* Last Address Pointer */
-#define EXTACON_EBBPTR		(0x3ff << 12)		/* Base Pointer */
-#define EXTACON_EBTACT		(7     <<  9)		/* Write Enable/Output Enable Active Time */
-#define EXTACON_EBTCOH		(7     <<  6)		/* Chip Select Hold Time */
-#define EXTACON_EBTACS		(7     <<  3)		/* Address Setup Time before ECSN */
-#define EXTACON_EBTCOS		(7     <<  0)		/* Chip Select Time before OEN */
-
-/* ROM/SRAM/Flash Control Register */
-#define ROMCON_RBNPTR		(0x3ff << 22)		/* Next Pointer */
-#define ROMCON_RBBPTR		(0x3ff << 12)		/* Base Pointer */
-#define ROMCON_RBTACC		(7     <<  4)		/* Access Cycle Time */
-#define ROMCON_RBTPA		(3     <<  2)		/* Page Address Access Time */
-#define ROMCON_PMC		(3     <<  0)		/* Page Mode Configuration */
-#define		PMC_NORMAL		(0 << 0)
-#define		PMC_4WORD		(1 << 0)
-#define		PMC_8WORD		(2 << 0)
-#define		PMC_16WORD		(3 << 0)
-
-/* External I/O and ROM/SRAM/Flash General Register */
-#define ERGCON_TMULT		(3 << 28)		/* Time Multiplier */
-#define ERGCON_DSX2		(3 << 20)		/* Data Width (External I/O Bank 2) */
-#define ERGCON_DSX1		(3 << 18)		/* Data Width (External I/O Bank 1) */
-#define ERGCON_DSX0		(3 << 16)		/* Data Width (External I/O Bank 0) */
-#define ERGCON_DSR1		(3 <<  2)		/* Data Width (ROM/SRAM/Flash Bank 1) */
-#define ERGCON_DSR0		(3 <<  0)		/* Data Width (ROM/SRAM/Flash Bank 0) */
-
-/* SDRAM Control Register */
-#define SDCON_DBNPTR		(0x3ff << 22)		/* Last Address Pointer */
-#define SDCON_DBBPTR		(0x3ff << 12)		/* Base Pointer */
-#define SDCON_DBCAB		(3     <<  8)		/* Column Address Bits */
-#define SDCON_DBBNUM		(1     <<  3)		/* Number of Banks */
-#define SDCON_DBDBW		(3     <<  1)		/* Data Bus Width */
-
-/* SDRAM General Control Register */
-#define SDGCON_SDTRC		(3 << 2)		/* RAS to CAS latency */
-#define SDGCON_SDCAS		(3 << 0)		/* CAS latency */
-
-/* SDRAM Buffer Control Register */
-#define SDBCON_SDESTA		(1 << 31)		/* SDRAM Engine Status */
-#define SDBCON_RBUFBDIS		(1 << 24)		/* Read Buffer Burst Enable */
-#define SDBCON_WFIFOEN		(1 << 23)		/* Write FIFO Enable */
-#define SDBCON_RBUFEN		(1 << 22)		/* Read Buffer Enable */
-#define SDBCON_FLUSHWFIFO	(1 << 21)		/* Flush Write FIFO */
-#define SDBCON_RBUFINV		(1 << 20)		/* Read Buffer Invalidate */
-#define SDBCON_SDINI		(3 << 16)		/* SDRAM Initialization Control */
-#define SDBCON_SDMODE		(0x3fff << 0)		/* SDRAM Mode Register Value Program */
-
-/* SDRAM Refresh Timer Register */
-#define REFTIM_REFTIM		(0xffff << 0)		/* Refresh Timer Value */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-misc.h b/include/asm-arm/arch-ks8695/regs-misc.h
deleted file mode 100644
index 632ca66..0000000
--- a/include/asm-arm/arch-ks8695/regs-misc.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-misc.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - Miscellaneous Registers
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_MISC_H
-#define KS8695_MISC_H
-
-#define KS8695_MISC_OFFSET	(0xF0000 + 0xEA00)
-#define KS8695_MISC_VA		(KS8695_IO_VA + KS8695_MISC_OFFSET)
-#define KS8695_MISC_PA		(KS8695_IO_PA + KS8695_MISC_OFFSET)
-
-
-/*
- * Miscellaneous registers
- */
-#define KS8695_DID		(0x00)		/* Device ID */
-#define KS8695_RID		(0x04)		/* Revision ID */
-#define KS8695_HMC		(0x08)		/* HPNA Miscellaneous Control [KS8695 only] */
-#define KS8695_WMC		(0x0c)		/* WAN Miscellaneous Control */
-#define KS8695_WPPM		(0x10)		/* WAN PHY Power Management */
-#define KS8695_PPS		(0x1c)		/* PHY PowerSave */
-
-/* Device ID Register */
-#define DID_ID			(0xffff << 0)	/* Device ID */
-
-/* Revision ID Register */
-#define RID_SUBID		(0xf << 4)	/* Sub-Device ID */
-#define RID_REVISION		(0xf << 0)	/* Revision ID */
-
-/* HPNA Miscellaneous Control Register */
-#define HMC_HSS			(1 << 1)	/* Speed */
-#define HMC_HDS			(1 << 0)	/* Duplex */
-
-/* WAN Miscellaneous Control Register */
-#define WMC_WANC		(1 << 30)	/* Auto-negotiation complete */
-#define WMC_WANR		(1 << 29)	/* Auto-negotiation restart */
-#define WMC_WANAP		(1 << 28)	/* Advertise Pause */
-#define WMC_WANA100F		(1 << 27)	/* Advertise 100 FDX */
-#define WMC_WANA100H		(1 << 26)	/* Advertise 100 HDX */
-#define WMC_WANA10F		(1 << 25)	/* Advertise 10 FDX */
-#define WMC_WANA10H		(1 << 24)	/* Advertise 10 HDX */
-#define WMC_WLS			(1 << 23)	/* Link status */
-#define WMC_WDS			(1 << 22)	/* Duplex status */
-#define WMC_WSS			(1 << 21)	/* Speed status */
-#define WMC_WLPP		(1 << 20)	/* Link Partner Pause */
-#define WMC_WLP100F		(1 << 19)	/* Link Partner 100 FDX */
-#define WMC_WLP100H		(1 << 18)	/* Link Partner 100 HDX */
-#define WMC_WLP10F		(1 << 17)	/* Link Partner 10 FDX */
-#define WMC_WLP10H		(1 << 16)	/* Link Partner 10 HDX */
-#define WMC_WAND		(1 << 15)	/* Auto-negotiation disable */
-#define WMC_WANF100		(1 << 14)	/* Force 100 */
-#define WMC_WANFF		(1 << 13)	/* Force FDX */
-#define WMC_WLED1S		(7 <<  4)	/* LED1 Select */
-#define		WLED1S_SPEED		(0 << 4)
-#define		WLED1S_LINK		(1 << 4)
-#define		WLED1S_DUPLEX		(2 << 4)
-#define		WLED1S_COLLISION	(3 << 4)
-#define		WLED1S_ACTIVITY		(4 << 4)
-#define		WLED1S_FDX_COLLISION	(5 << 4)
-#define		WLED1S_LINK_ACTIVITY	(6 << 4)
-#define WMC_WLED0S		(7 << 0)	/* LED0 Select */
-#define		WLED0S_SPEED		(0 << 0)
-#define		WLED0S_LINK		(1 << 0)
-#define		WLED0S_DUPLEX		(2 << 0)
-#define		WLED0S_COLLISION	(3 << 0)
-#define		WLED0S_ACTIVITY		(4 << 0)
-#define		WLED0S_FDX_COLLISION	(5 << 0)
-#define		WLED0S_LINK_ACTIVITY	(6 << 0)
-
-/* WAN PHY Power Management Register */
-#define WPPM_WLPBK		(1 << 14)	/* Local Loopback */
-#define WPPM_WRLPKB		(1 << 13)	/* Remove Loopback */
-#define WPPM_WPI		(1 << 12)	/* PHY isolate */
-#define WPPM_WFL		(1 << 10)	/* Force link */
-#define WPPM_MDIXS		(1 << 9)	/* MDIX Status */
-#define WPPM_FEF		(1 << 8)	/* Far End Fault */
-#define WPPM_AMDIXP		(1 << 7)	/* Auto MDIX Parameter */
-#define WPPM_TXDIS		(1 << 6)	/* Disable transmitter */
-#define WPPM_DFEF		(1 << 5)	/* Disable Far End Fault */
-#define WPPM_PD			(1 << 4)	/* Power Down */
-#define WPPM_DMDX		(1 << 3)	/* Disable Auto MDI/MDIX */
-#define WPPM_FMDX		(1 << 2)	/* Force MDIX */
-#define WPPM_LPBK		(1 << 1)	/* MAX Loopback */
-
-/* PHY Power Save Register */
-#define PPS_PPSM		(1 << 0)	/* PHY Power Save Mode */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-pci.h b/include/asm-arm/arch-ks8695/regs-pci.h
deleted file mode 100644
index 286d6d4..0000000
--- a/include/asm-arm/arch-ks8695/regs-pci.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-pci.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - PCI bridge registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define KS8695_PCI_OFFSET	(0xF0000 + 0x2000)
-#define KS8695_PCI_VA		(KS8695_IO_VA + KS8695_PCI_OFFSET)
-#define KS8695_PCI_PA		(KS8695_IO_PA + KS8695_PCI_OFFSET)
-
-
-#define KS8695_CRCFID		(0x000)		/* Configuration: Identification */
-#define KS8695_CRCFCS		(0x004)		/* Configuration: Command and Status */
-#define KS8695_CRCFRV		(0x008)		/* Configuration: Revision */
-#define KS8695_CRCFLT		(0x00C)		/* Configuration: Latency Timer */
-#define KS8695_CRCBMA		(0x010)		/* Configuration: Base Memory Address */
-#define KS8695_CRCSID		(0x02C)		/* Configuration: Subsystem ID */
-#define KS8695_CRCFIT		(0x03C)		/* Configuration: Interrupt */
-#define KS8695_PBCA		(0x100)		/* Bridge Configuration Address */
-#define KS8695_PBCD		(0x104)		/* Bridge Configuration Data */
-#define KS8695_PBM		(0x200)		/* Bridge Mode */
-#define KS8695_PBCS		(0x204)		/* Bridge Control and Status */
-#define KS8695_PMBA		(0x208)		/* Bridge Memory Base Address */
-#define KS8695_PMBAC		(0x20C)		/* Bridge Memory Base Address Control */
-#define KS8695_PMBAM		(0x210)		/* Bridge Memory Base Address Mask */
-#define KS8695_PMBAT		(0x214)		/* Bridge Memory Base Address Translation */
-#define KS8695_PIOBA		(0x218)		/* Bridge I/O Base Address */
-#define KS8695_PIOBAC		(0x21C)		/* Bridge I/O Base Address Control */
-#define KS8695_PIOBAM		(0x220)		/* Bridge I/O Base Address Mask */
-#define KS8695_PIOBAT		(0x224)		/* Bridge I/O Base Address Translation */
-
-
-/* Configuration: Identification */
-
-/* Configuration: Command and Status */
-
-/* Configuration: Revision */
-
-
-
-#define CFRV_GUEST		(1 << 23)
-
-#define PBCA_TYPE1		(1)
-#define PBCA_ENABLE		(1 << 31)
-
-
diff --git a/include/asm-arm/arch-ks8695/regs-switch.h b/include/asm-arm/arch-ks8695/regs-switch.h
deleted file mode 100644
index 5f37be3..0000000
--- a/include/asm-arm/arch-ks8695/regs-switch.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-switch.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - Switch Registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_SWITCH_H
-#define KS8695_SWITCH_H
-
-#define KS8695_SWITCH_OFFSET	(0xF0000 + 0xe800)
-#define KS8695_SWITCH_VA	(KS8695_IO_VA + KS8695_SWITCH_OFFSET)
-#define KS8695_SWITCH_PA	(KS8695_IO_PA + KS8695_SWITCH_OFFSET)
-
-
-/*
- * Switch registers
- */
-#define KS8695_SEC0		(0x00)		/* Switch Engine Control 0 */
-#define KS8695_SEC1		(0x04)		/* Switch Engine Control 1 */
-#define KS8695_SEC2		(0x08)		/* Switch Engine Control 2 */
-
-#define KS8695_P(x)_C(z)	(0xc0 + (((x)-1)*3 + ((z)-1))*4)	/* Port Configuration Registers */
-
-#define KS8695_SEP12AN		(0x48)		/* Port 1 & 2 Auto-Negotiation */
-#define KS8695_SEP34AN		(0x4c)		/* Port 3 & 4 Auto-Negotiation */
-#define KS8695_SEIAC		(0x50)		/* Indirect Access Control */
-#define KS8695_SEIADH2		(0x54)		/* Indirect Access Data High 2 */
-#define KS8695_SEIADH1		(0x58)		/* Indirect Access Data High 1 */
-#define KS8695_SEIADL		(0x5c)		/* Indirect Access Data Low */
-#define KS8695_SEAFC		(0x60)		/* Advance Feature Control */
-#define KS8695_SEDSCPH		(0x64)		/* TOS Priority High */
-#define KS8695_SEDSCPL		(0x68)		/* TOS Priority Low */
-#define KS8695_SEMAH		(0x6c)		/* Switch Engine MAC Address High */
-#define KS8695_SEMAL		(0x70)		/* Switch Engine MAC Address Low */
-#define KS8695_LPPM12		(0x74)		/* Port 1 & 2 PHY Power Management */
-#define KS8695_LPPM34		(0x78)		/* Port 3 & 4 PHY Power Management */
-
-
-/* Switch Engine Control 0 */
-#define SEC0_LLED1S		(7 << 25)	/* LED1 Select */
-#define		LLED1S_SPEED		(0 << 25)
-#define		LLED1S_LINK		(1 << 25)
-#define		LLED1S_DUPLEX		(2 << 25)
-#define		LLED1S_COLLISION	(3 << 25)
-#define		LLED1S_ACTIVITY		(4 << 25)
-#define		LLED1S_FDX_COLLISION	(5 << 25)
-#define		LLED1S_LINK_ACTIVITY	(6 << 25)
-#define SEC0_LLED0S		(7 << 22)	/* LED0 Select */
-#define		LLED0S_SPEED		(0 << 22)
-#define		LLED0S_LINK		(1 << 22)
-#define		LLED0S_DUPLEX		(2 << 22)
-#define		LLED0S_COLLISION	(3 << 22)
-#define		LLED0S_ACTIVITY		(4 << 22)
-#define		LLED0S_FDX_COLLISION	(5 << 22)
-#define		LLED0S_LINK_ACTIVITY	(6 << 22)
-#define SEC0_ENABLE		(1 << 0)	/* Enable Switch */
-
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-sys.h b/include/asm-arm/arch-ks8695/regs-sys.h
deleted file mode 100644
index f317981..0000000
--- a/include/asm-arm/arch-ks8695/regs-sys.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-sys.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - System control registers and bit definitions
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_SYS_H
-#define KS8695_SYS_H
-
-#define KS8695_SYS_OFFSET	(0xF0000 + 0x0000)
-#define KS8695_SYS_VA		(KS8695_IO_VA + KS8695_SYS_OFFSET)
-#define KS8695_SYS_PA		(KS8695_IO_PA + KS8695_SYS_OFFSET)
-
-
-#define KS8695_SYSCFG		(0x00)		/* System Configuration Register */
-#define KS8695_CLKCON		(0x04)		/* System Clock and Bus Control Register */
-
-
-/* System Configuration Register */
-#define SYSCFG_SPRBP		(0x3ff << 16)	/* Register Bank Base Pointer */
-
-/* System Clock and Bus Control Register */
-#define CLKCON_SFMODE		(1 << 8)	/* System Fast Mode for Simulation */
-#define CLKCON_SCDC		(7 << 0)	/* System Clock Divider Select */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-timer.h b/include/asm-arm/arch-ks8695/regs-timer.h
deleted file mode 100644
index 0a9f7f9..0000000
--- a/include/asm-arm/arch-ks8695/regs-timer.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-timer.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Timer registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_TIMER_H
-#define KS8695_TIMER_H
-
-#define KS8695_TMR_OFFSET	(0xF0000 + 0xE400)
-#define KS8695_TMR_VA		(KS8695_IO_VA + KS8695_TMR_OFFSET)
-#define KS8695_TMR_PA		(KS8695_IO_PA + KS8695_TMR_OFFSET)
-
-
-/*
- * Timer registers
- */
-#define KS8695_TMCON		(0x00)		/* Timer Control Register */
-#define KS8695_T1TC		(0x04)		/* Timer 1 Timeout Count Register */
-#define KS8695_T0TC		(0x08)		/* Timer 0 Timeout Count Register */
-#define KS8695_T1PD		(0x0C)		/* Timer 1 Pulse Count Register */
-#define KS8695_T0PD		(0x10)		/* Timer 0 Pulse Count Register */
-
-
-/* Timer Control Register */
-#define TMCON_T1EN		(1 << 1)	/* Timer 1 Enable */
-#define TMCON_T0EN		(1 << 0)	/* Timer 0 Enable */
-
-/* Timer0 Timeout Counter Register */
-#define T0TC_WATCHDOG		(0xff)		/* Enable watchdog mode */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-uart.h b/include/asm-arm/arch-ks8695/regs-uart.h
deleted file mode 100644
index a27cb20..0000000
--- a/include/asm-arm/arch-ks8695/regs-uart.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ks8695/regs-uart.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - UART register and bit definitions.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef KS8695_UART_H
-#define KS8695_UART_H
-
-#define KS8695_UART_OFFSET	(0xF0000 + 0xE000)
-#define KS8695_UART_VA		(KS8695_IO_VA + KS8695_UART_OFFSET)
-#define KS8695_UART_PA		(KS8695_IO_PA + KS8695_UART_OFFSET)
-
-
-/*
- * UART registers
- */
-#define KS8695_URRB	(0x00)		/* Receive Buffer Register */
-#define KS8695_URTH	(0x04)		/* Transmit Holding Register */
-#define KS8695_URFC	(0x08)		/* FIFO Control Register */
-#define KS8695_URLC	(0x0C)		/* Line Control Register */
-#define KS8695_URMC	(0x10)		/* Modem Control Register */
-#define KS8695_URLS	(0x14)		/* Line Status Register */
-#define KS8695_URMS	(0x18)		/* Modem Status Register */
-#define KS8695_URBD	(0x1C)		/* Baud Rate Divisor Register */
-#define KS8695_USR	(0x20)		/* Status Register */
-
-
-/* FIFO Control Register */
-#define URFC_URFRT	(3 << 6)	/* Receive FIFO Trigger Level */
-#define		URFC_URFRT_1	(0 << 6)
-#define		URFC_URFRT_4	(1 << 6)
-#define		URFC_URFRT_8	(2 << 6)
-#define		URFC_URFRT_14	(3 << 6)
-#define URFC_URTFR	(1 << 2)	/* Transmit FIFO Reset */
-#define URFC_URRFR	(1 << 1)	/* Receive FIFO Reset */
-#define URFC_URFE	(1 << 0)	/* FIFO Enable */
-
-/* Line Control Register */
-#define URLC_URSBC	(1 << 6)	/* Set Break Condition */
-#define URLC_PARITY	(7 << 3)	/* Parity */
-#define		URPE_NONE	(0 << 3)
-#define		URPE_ODD	(1 << 3)
-#define		URPE_EVEN	(3 << 3)
-#define		URPE_MARK	(5 << 3)
-#define		URPE_SPACE	(7 << 3)
-#define URLC_URSB	(1 << 2)	/* Stop Bits */
-#define URLC_URCL	(3 << 0)	/* Character Length */
-#define		URCL_5		(0 << 0)
-#define		URCL_6		(1 << 0)
-#define		URCL_7		(2 << 0)
-#define		URCL_8		(3 << 0)
-
-/* Modem Control Register */
-#define URMC_URLB	(1 << 4)	/* Loop-back mode */
-#define URMC_UROUT2	(1 << 3)	/* OUT2 signal */
-#define URMC_UROUT1	(1 << 2)	/* OUT1 signal */
-#define URMC_URRTS	(1 << 1)	/* Request to Send */
-#define URMC_URDTR	(1 << 0)	/* Data Terminal Ready */
-
-/* Line Status Register */
-#define URLS_URRFE	(1 << 7)	/* Receive FIFO Error */
-#define URLS_URTE	(1 << 6)	/* Transmit Empty */
-#define URLS_URTHRE	(1 << 5)	/* Transmit Holding Register Empty */
-#define URLS_URBI	(1 << 4)	/* Break Interrupt */
-#define URLS_URFE	(1 << 3)	/* Framing Error */
-#define URLS_URPE	(1 << 2)	/* Parity Error */
-#define URLS_URROE	(1 << 1)	/* Receive Overrun Error */
-#define URLS_URDR	(1 << 0)	/* Receive Data Ready */
-
-/* Modem Status Register */
-#define URMS_URDCD	(1 << 7)	/* Data Carrier Detect */
-#define URMS_URRI	(1 << 6)	/* Ring Indicator */
-#define URMS_URDSR	(1 << 5)	/* Data Set Ready */
-#define URMS_URCTS	(1 << 4)	/* Clear to Send */
-#define URMS_URDDCD	(1 << 3)	/* Delta Data Carrier Detect */
-#define URMS_URTERI	(1 << 2)	/* Trailing Edge Ring Indicator */
-#define URMS_URDDST	(1 << 1)	/* Delta Data Set Ready */
-#define URMS_URDCTS	(1 << 0)	/* Delta Clear to Send */
-
-/* Status Register */
-#define USR_UTI		(1 << 0)	/* Timeout Indication */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-wan.h b/include/asm-arm/arch-ks8695/regs-wan.h
deleted file mode 100644
index 52e35b0..0000000
--- a/include/asm-arm/arch-ks8695/regs-wan.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-wan.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - WAN Registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_WAN_H
-#define KS8695_WAN_H
-
-#define KS8695_WAN_OFFSET	(0xF0000 + 0x6000)
-#define KS8695_WAN_VA		(KS8695_IO_VA + KS8695_WAN_OFFSET)
-#define KS8695_WAN_PA		(KS8695_IO_PA + KS8695_WAN_OFFSET)
-
-
-/*
- * WAN registers
- */
-#define KS8695_WMDTXC		(0x00)		/* DMA Transmit Control */
-#define KS8695_WMDRXC		(0x04)		/* DMA Receive Control */
-#define KS8695_WMDTSC		(0x08)		/* DMA Transmit Start Command */
-#define KS8695_WMDRSC		(0x0c)		/* DMA Receive Start Command */
-#define KS8695_WTDLB		(0x10)		/* Transmit Descriptor List Base Address */
-#define KS8695_WRDLB		(0x14)		/* Receive Descriptor List Base Address */
-#define KS8695_WMAL		(0x18)		/* MAC Station Address Low */
-#define KS8695_WMAH		(0x1c)		/* MAC Station Address High */
-#define KS8695_WMAAL_(n)	(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
-#define KS8695_WMAAH_(n)	(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
-
-
-/* DMA Transmit Control Register */
-#define WMDTXC_WMTRST		(1    << 31)	/* Soft Reset */
-#define WMDTXC_WMTBS		(0x3f << 24)	/* Transmit Burst Size */
-#define WMDTXC_WMTUCG		(1    << 18)	/* Transmit UDP Checksum Generate */
-#define WMDTXC_WMTTCG		(1    << 17)	/* Transmit TCP Checksum Generate */
-#define WMDTXC_WMTICG		(1    << 16)	/* Transmit IP Checksum Generate */
-#define WMDTXC_WMTFCE		(1    <<  9)	/* Transmit Flow Control Enable */
-#define WMDTXC_WMTLB		(1    <<  8)	/* Loopback mode */
-#define WMDTXC_WMTEP		(1    <<  2)	/* Transmit Enable Padding */
-#define WMDTXC_WMTAC		(1    <<  1)	/* Transmit Add CRC */
-#define WMDTXC_WMTE		(1    <<  0)	/* TX Enable */
-
-/* DMA Receive Control Register */
-#define WMDRXC_WMRBS		(0x3f << 24)	/* Receive Burst Size */
-#define WMDRXC_WMRUCC		(1    << 18)	/* Receive UDP Checksum check */
-#define WMDRXC_WMRTCG		(1    << 17)	/* Receive TCP Checksum check */
-#define WMDRXC_WMRICG		(1    << 16)	/* Receive IP Checksum check */
-#define WMDRXC_WMRFCE		(1    <<  9)	/* Receive Flow Control Enable */
-#define WMDRXC_WMRB		(1    <<  6)	/* Receive Broadcast */
-#define WMDRXC_WMRM		(1    <<  5)	/* Receive Multicast */
-#define WMDRXC_WMRU		(1    <<  4)	/* Receive Unicast */
-#define WMDRXC_WMRERR		(1    <<  3)	/* Receive Error Frame */
-#define WMDRXC_WMRA		(1    <<  2)	/* Receive All */
-#define WMDRXC_WMRE		(1    <<  0)	/* RX Enable */
-
-/* Additional Station Address High */
-#define WMAAH_E			(1    << 31)	/* Address Enabled */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/system.h b/include/asm-arm/arch-ks8695/system.h
deleted file mode 100644
index 3bc28106..0000000
--- a/include/asm-arm/arch-ks8695/system.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-arm/arch-s3c2410/system.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * KS8695 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/io.h>
-#include <asm/arch/regs-timer.h>
-
-static void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks,
-	 */
-	cpu_do_idle();
-
-}
-
-static void arch_reset(char mode)
-{
-	unsigned int reg;
-
-	if (mode == 's')
-		cpu_reset(0);
-
-	/* disable timer0 */
-	reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
-	__raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
-
-	/* enable watchdog mode */
-	__raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
-
-	/* re-enable timer0 */
-	__raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
-}
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/timex.h b/include/asm-arm/arch-ks8695/timex.h
deleted file mode 100644
index 8320d52..0000000
--- a/include/asm-arm/arch-ks8695/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/timex.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * KS8695 - Time Parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* timers are derived from MCLK, which is 25MHz */
-#define CLOCK_TICK_RATE 25000000
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/uncompress.h b/include/asm-arm/arch-ks8695/uncompress.h
deleted file mode 100644
index 733a508..0000000
--- a/include/asm-arm/arch-ks8695/uncompress.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/uncompress.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Kernel uncompressor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/io.h>
-#include <asm/arch/regs-uart.h>
-
-static void putc(char c)
-{
-	while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
-		barrier();
-
-	__raw_writel(c, KS8695_UART_PA + KS8695_URTH);
-}
-
-static inline void flush(void)
-{
-	while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTE))
-		barrier();
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/vmalloc.h b/include/asm-arm/arch-ks8695/vmalloc.h
deleted file mode 100644
index d1d88e58..0000000
--- a/include/asm-arm/arch-ks8695/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/vmalloc.h
- *
- * Copyright (C) 2006 Ben Dooks
- * Copyright (C) 2006 Simtec Electronics <linux@simtec.co.uk>
- *
- * KS8695 vmalloc definition
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END	  (KS8695_IO_VA & PGDIR_MASK)
-
-#endif
diff --git a/include/asm-arm/arch-l7200/aux_reg.h b/include/asm-arm/arch-l7200/aux_reg.h
deleted file mode 100644
index 762cbc7..0000000
--- a/include/asm-arm/arch-l7200/aux_reg.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/aux_reg.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   08-02-2000	SJH	Created file
- */
-#ifndef _ASM_ARCH_AUXREG_H
-#define _ASM_ARCH_AUXREG_H
-
-#include <asm/arch/hardware.h>
-
-#define l7200aux_reg	*((volatile unsigned int *) (AUX_BASE))
-
-/*
- * Auxillary register values
- */
-#define AUX_CLEAR		0x00000000
-#define AUX_DIAG_LED_ON		0x00000002
-#define AUX_RTS_UART1		0x00000004
-#define AUX_DTR_UART1		0x00000008
-#define AUX_KBD_COLUMN_12_HIGH	0x00000010
-#define AUX_KBD_COLUMN_12_OFF	0x00000020
-#define AUX_KBD_COLUMN_13_HIGH	0x00000040
-#define AUX_KBD_COLUMN_13_OFF	0x00000080
-
-#endif
diff --git a/include/asm-arm/arch-l7200/debug-macro.S b/include/asm-arm/arch-l7200/debug-macro.S
deleted file mode 100644
index 8464733..0000000
--- a/include/asm-arm/arch-l7200/debug-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/include/asm-arm/arch-l7200/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.equ	io_virt, IO_BASE
-		.equ	io_phys, IO_START
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #io_phys		@ physical base address
-		movne	\rx, #io_virt		@ virtual address
-		add	\rx, \rx, #0x00044000	@ UART1
-@		add	\rx, \rx, #0x00045000	@ UART2
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x0]	@ UARTDR
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
-		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
-		bne	1001b
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
-		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
-		bne	1001b
-		.endm
diff --git a/include/asm-arm/arch-l7200/dma.h b/include/asm-arm/arch-l7200/dma.h
deleted file mode 100644
index 4c7eca6..0000000
--- a/include/asm-arm/arch-l7200/dma.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/dma.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  08-29-2000	SJH	Created
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS         0xd0000000
-
-#define DMA_S0                  0
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-l7200/entry-macro.S b/include/asm-arm/arch-l7200/entry-macro.S
deleted file mode 100644
index d5e7294..0000000
--- a/include/asm-arm/arch-l7200/entry-macro.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-arm/arch-l7200/entry-macro.S
- *
- * Low-level IRQ helper macros for L7200-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-
-		.equ	irq_base_addr,	IO_BASE_2
-
-		.macro  disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov     \irqstat, #irq_base_addr		@ Virt addr IRQ regs
-		add	\irqstat, \irqstat, #0x00001000		@ Status reg
-		ldr     \irqstat, [\irqstat, #0]		@ get interrupts
-		mov     \irqnr, #0
-1001:		tst     \irqstat, #1
-		addeq   \irqnr, \irqnr, #1
-		moveq   \irqstat, \irqstat, lsr #1
-		tsteq   \irqnr, #32
-		beq     1001b
-		teq     \irqnr, #32
-		.endm
-
diff --git a/include/asm-arm/arch-l7200/gp_timers.h b/include/asm-arm/arch-l7200/gp_timers.h
deleted file mode 100644
index 6f20962..0000000
--- a/include/asm-arm/arch-l7200/gp_timers.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/gp_timers.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   07-28-2000	SJH	Created file
- *   08-02-2000	SJH	Used structure for registers
- */
-#ifndef _ASM_ARCH_GPTIMERS_H
-#define _ASM_ARCH_GPTIMERS_H
-
-#include <asm/arch/hardware.h>
-
-/*
- * Layout of L7200 general purpose timer registers
- */
-struct GPT_Regs {
-	unsigned int TIMERLOAD;
-	unsigned int TIMERVALUE;
-	unsigned int TIMERCONTROL;
-	unsigned int TIMERCLEAR;
-};
-
-#define GPT_BASE		(IO_BASE_2 + 0x3000)
-#define l7200_timer1_regs	((volatile struct GPT_Regs *) (GPT_BASE))
-#define l7200_timer2_regs	((volatile struct GPT_Regs *) (GPT_BASE + 0x20))
-
-/*
- * General register values
- */
-#define	GPT_PRESCALE_1		0x00000000
-#define	GPT_PRESCALE_16		0x00000004
-#define	GPT_PRESCALE_256	0x00000008
-#define GPT_MODE_FREERUN	0x00000000
-#define GPT_MODE_PERIODIC	0x00000040
-#define GPT_ENABLE		0x00000080
-#define GPT_BZTOG		0x00000100
-#define GPT_BZMOD		0x00000200
-#define GPT_LOAD_MASK 		0x0000ffff
-
-#endif
diff --git a/include/asm-arm/arch-l7200/gpio.h b/include/asm-arm/arch-l7200/gpio.h
deleted file mode 100644
index 0b63e42..0000000
--- a/include/asm-arm/arch-l7200/gpio.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/****************************************************************************/
-/*
- *      linux/include/asm-arm/arch-l7200/gpio.h
- *
- *      Registers and  helper functions for the L7200 Link-Up Systems
- *      GPIO.
- *
- *      (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define GPIO_OFF   0x00005000  /* Offset from IO_START to the GPIO reg's. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define GPIO_START (IO_START_2 + GPIO_OFF) /* Physical addr of the GPIO reg. */
-#define GPIO_BASE  (IO_BASE_2  + GPIO_OFF) /* Virtual addr of the GPIO reg. */
-
-/* Offsets from the start of the GPIO for all the registers. */
-#define PADR_OFF     0x000
-#define PADDR_OFF    0x004
-#define PASBSR_OFF   0x008
-#define PAEENR_OFF   0x00c
-#define PAESNR_OFF   0x010
-#define PAESTR_OFF   0x014
-#define PAIMR_OFF    0x018
-#define PAINT_OFF    0x01c
-
-#define PBDR_OFF     0x020
-#define PBDDR_OFF    0x024
-#define PBSBSR_OFF   0x028
-#define PBIMR_OFF    0x038
-#define PBINT_OFF    0x03c
-
-#define PCDR_OFF     0x040
-#define PCDDR_OFF    0x044
-#define PCSBSR_OFF   0x048
-#define PCIMR_OFF    0x058
-#define PCINT_OFF    0x05c
-
-#define PDDR_OFF     0x060
-#define PDDDR_OFF    0x064
-#define PDSBSR_OFF   0x068
-#define PDEENR_OFF   0x06c
-#define PDESNR_OFF   0x070
-#define PDESTR_OFF   0x074
-#define PDIMR_OFF    0x078
-#define PDINT_OFF    0x07c
-
-#define PEDR_OFF     0x080
-#define PEDDR_OFF    0x084
-#define PESBSR_OFF   0x088
-#define PEEENR_OFF   0x08c
-#define PEESNR_OFF   0x090
-#define PEESTR_OFF   0x094
-#define PEIMR_OFF    0x098
-#define PEINT_OFF    0x09c
-
-/* Define the GPIO registers for use by device drivers and the kernel. */
-#define PADR   (*(volatile unsigned long *)(GPIO_BASE+PADR_OFF))
-#define PADDR  (*(volatile unsigned long *)(GPIO_BASE+PADDR_OFF))
-#define PASBSR (*(volatile unsigned long *)(GPIO_BASE+PASBSR_OFF))
-#define PAEENR (*(volatile unsigned long *)(GPIO_BASE+PAEENR_OFF))
-#define PAESNR (*(volatile unsigned long *)(GPIO_BASE+PAESNR_OFF))
-#define PAESTR (*(volatile unsigned long *)(GPIO_BASE+PAESTR_OFF))
-#define PAIMR  (*(volatile unsigned long *)(GPIO_BASE+PAIMR_OFF))
-#define PAINT  (*(volatile unsigned long *)(GPIO_BASE+PAINT_OFF))
-
-#define PBDR   (*(volatile unsigned long *)(GPIO_BASE+PBDR_OFF))
-#define PBDDR  (*(volatile unsigned long *)(GPIO_BASE+PBDDR_OFF))
-#define PBSBSR (*(volatile unsigned long *)(GPIO_BASE+PBSBSR_OFF))
-#define PBIMR  (*(volatile unsigned long *)(GPIO_BASE+PBIMR_OFF))
-#define PBINT  (*(volatile unsigned long *)(GPIO_BASE+PBINT_OFF))
-
-#define PCDR   (*(volatile unsigned long *)(GPIO_BASE+PCDR_OFF))
-#define PCDDR  (*(volatile unsigned long *)(GPIO_BASE+PCDDR_OFF))
-#define PCSBSR (*(volatile unsigned long *)(GPIO_BASE+PCSBSR_OFF))
-#define PCIMR  (*(volatile unsigned long *)(GPIO_BASE+PCIMR_OFF))
-#define PCINT  (*(volatile unsigned long *)(GPIO_BASE+PCINT_OFF))
-
-#define PDDR   (*(volatile unsigned long *)(GPIO_BASE+PDDR_OFF))
-#define PDDDR  (*(volatile unsigned long *)(GPIO_BASE+PDDDR_OFF))
-#define PDSBSR (*(volatile unsigned long *)(GPIO_BASE+PDSBSR_OFF))
-#define PDEENR (*(volatile unsigned long *)(GPIO_BASE+PDEENR_OFF))
-#define PDESNR (*(volatile unsigned long *)(GPIO_BASE+PDESNR_OFF))
-#define PDESTR (*(volatile unsigned long *)(GPIO_BASE+PDESTR_OFF))
-#define PDIMR  (*(volatile unsigned long *)(GPIO_BASE+PDIMR_OFF))
-#define PDINT  (*(volatile unsigned long *)(GPIO_BASE+PDINT_OFF))
-
-#define PEDR   (*(volatile unsigned long *)(GPIO_BASE+PEDR_OFF))
-#define PEDDR  (*(volatile unsigned long *)(GPIO_BASE+PEDDR_OFF))
-#define PESBSR (*(volatile unsigned long *)(GPIO_BASE+PESBSR_OFF))
-#define PEEENR (*(volatile unsigned long *)(GPIO_BASE+PEEENR_OFF))
-#define PEESNR (*(volatile unsigned long *)(GPIO_BASE+PEESNR_OFF))
-#define PEESTR (*(volatile unsigned long *)(GPIO_BASE+PEESTR_OFF))
-#define PEIMR  (*(volatile unsigned long *)(GPIO_BASE+PEIMR_OFF))
-#define PEINT  (*(volatile unsigned long *)(GPIO_BASE+PEINT_OFF))
-
-#define VEE_EN         0x02
-#define BACKLIGHT_EN   0x04
diff --git a/include/asm-arm/arch-l7200/hardware.h b/include/asm-arm/arch-l7200/hardware.h
deleted file mode 100644
index 2ab43f3..0000000
--- a/include/asm-arm/arch-l7200/hardware.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/hardware.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * This file contains the hardware definitions for the 
- * LinkUp Systems L7200 SOC development board.
- *
- * Changelog:
- *   02-01-2000	 RS	Created L7200 version, derived from rpc code
- *   03-21-2000	SJH	Cleaned up file
- *   04-21-2000	 RS 	Changed mapping of I/O in virtual space
- *   04-25-2000	SJH	Removed unused symbols and such
- *   05-05-2000	SJH	Complete rewrite
- *   07-31-2000	SJH	Added undocumented debug auxillary port to
- *			get at last two columns for keyboard driver
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/* Hardware addresses of major areas.
- *  *_START is the physical address
- *  *_SIZE  is the size of the region
- *  *_BASE  is the virtual address
- */
-#define RAM_START		0xf0000000
-#define RAM_SIZE		0x02000000
-#define RAM_BASE		0xc0000000
-
-#define IO_START		0x80000000      /* I/O */
-#define IO_SIZE			0x01000000
-#define IO_BASE			0xd0000000
-
-#define IO_START_2		0x90000000      /* I/O */
-#define IO_SIZE_2		0x01000000
-#define IO_BASE_2		0xd1000000
-
-#define AUX_START		0x1a000000      /* AUX PORT */
-#define AUX_SIZE 		0x01000000
-#define AUX_BASE		0xd2000000
-
-#define FLASH1_START		0x00000000      /* FLASH BANK 1 */
-#define FLASH1_SIZE 		0x01000000
-#define FLASH1_BASE		0xd3000000
-
-#define FLASH2_START		0x10000000      /* FLASH BANK 2 */
-#define FLASH2_SIZE 		0x01000000
-#define FLASH2_BASE		0xd4000000
-
-#define ISA_START		0x20000000	/* ISA */
-#define ISA_SIZE		0x20000000
-#define ISA_BASE		0xe0000000
-
-#define PCIO_BASE		IO_BASE
-
-#endif
diff --git a/include/asm-arm/arch-l7200/io.h b/include/asm-arm/arch-l7200/io.h
deleted file mode 100644
index e24a10a..0000000
--- a/include/asm-arm/arch-l7200/io.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/io.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  03-21-2000	SJH	Created from linux/include/asm-arm/arch-nexuspci/io.h
- *  08-31-2000	SJH	Added in IO functions necessary for new drivers
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * There are not real ISA nor PCI buses, so we fake it.
- */
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-#define __io(a)	__io(a)
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-l7200/irqs.h b/include/asm-arm/arch-l7200/irqs.h
deleted file mode 100644
index 7120c01..0000000
--- a/include/asm-arm/arch-l7200/irqs.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * include/asm-arm/arch-l7200/irqs.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   01-02-2000 RS	Create l7200 version
- *   03-28-2000 SJH	Removed unused interrupt
- *   07-28-2000 SJH	Added pseudo-keyboard interrupt
- */
-
-/*
- * NOTE: The second timer (Timer 2) is used as the keyboard
- *       interrupt when the keyboard driver is enabled.
- */
-
-#define NR_IRQS          32
-
-#define IRQ_STWDOG        0   /* Watchdog timer */
-#define IRQ_PROG          1   /* Programmable interrupt */
-#define IRQ_DEBUG_RX      2   /* Comm Rx debug */
-#define IRQ_DEBUG_TX      3   /* Comm Tx debug */
-#define IRQ_GCTC1         4   /* Timer 1 */
-#define IRQ_GCTC2         5   /* Timer 2 / Keyboard */
-#define IRQ_DMA           6   /* DMA controller */
-#define IRQ_CLCD          7   /* Color LCD controller */
-#define IRQ_SM_RX         8   /* Smart card */
-#define IRQ_SM_TX         9   /* Smart cart */
-#define IRQ_SM_RST       10   /* Smart card */
-#define IRQ_SIB          11   /* Serial Interface Bus */
-#define IRQ_MMC          12   /* MultiMediaCard */
-#define IRQ_SSP1         13   /* Synchronous Serial Port 1 */
-#define IRQ_SSP2         14   /* Synchronous Serial Port 1 */
-#define IRQ_SPI          15   /* SPI slave */
-#define IRQ_UART_1       16   /* UART 1 */
-#define IRQ_UART_2       17   /* UART 2 */
-#define IRQ_IRDA         18   /* IRDA */
-#define IRQ_RTC_TICK     19   /* Real Time Clock tick */
-#define IRQ_RTC_ALARM    20   /* Real Time Clock alarm */
-#define IRQ_GPIO         21   /* General Purpose IO */
-#define IRQ_GPIO_DMA     22   /* General Purpose IO, DMA */
-#define IRQ_M2M          23   /* Memory to memory DMA  */
-#define IRQ_RESERVED     24   /* RESERVED, don't use */
-#define IRQ_INTF         25   /* External active low interrupt */
-#define IRQ_INT0         26   /* External active low interrupt */
-#define IRQ_INT1         27   /* External active low interrupt */
-#define IRQ_INT2         28   /* External active low interrupt */
-#define IRQ_UCB1200      29   /* Interrupt generated by UCB1200*/
-#define IRQ_BAT_LO       30   /* Low batery or external power */
-#define IRQ_MEDIA_CHG    31   /* Media change interrupt */
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START	64
diff --git a/include/asm-arm/arch-l7200/memory.h b/include/asm-arm/arch-l7200/memory.h
deleted file mode 100644
index 402df63..0000000
--- a/include/asm-arm/arch-l7200/memory.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/memory.h
- *
- * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
- * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *
- * Changelog:
- *  03-13-2000	SJH	Created
- *  04-13-2000  RS      Changed bus macros for new addr
- *  05-03-2000  SJH     Removed bus macros and fixed virt_to_phys macro
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset on the L7200 SDB.
- */
-#define PHYS_OFFSET     UL(0xf0000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
- * Cache flushing area - ROM
- */
-#define FLUSH_BASE_PHYS		0x40000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/include/asm-arm/arch-l7200/pmpcon.h b/include/asm-arm/arch-l7200/pmpcon.h
deleted file mode 100644
index 730056c..0000000
--- a/include/asm-arm/arch-l7200/pmpcon.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/****************************************************************************/
-/*
- *  linux/include/asm-arm/arch-l7200/pmpcon.h
- *
- *   Registers and  helper functions for the L7200 Link-Up Systems
- *   DC/DC converter register.
- *
- *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define PMPCON_OFF 0x00006000  /* Offset from IO_START_2. */
-
-/* IO_START_2 and IO_BASE_2 are defined in hardware.h */
-
-#define PMPCON_START (IO_START_2 + PMPCON_OFF)  /* Physical address of reg. */
-#define PMPCON_BASE  (IO_BASE_2  + PMPCON_OFF)  /* Virtual address of reg. */
-
-
-#define PMPCON (*(volatile unsigned int *)(PMPCON_BASE))
-
-#define PWM2_50CYCLE 0x800
-#define CONTRAST     0x9
-
-#define PWM1H (CONTRAST)
-#define PWM1L (CONTRAST << 4)
-
-#define PMPCON_VALUE  (PWM2_50CYCLE | PWM1L | PWM1H) 
-	
-/* PMPCON = 0x811;   // too light and fuzzy
- * PMPCON = 0x844;   
- * PMPCON = 0x866;   // better color poor depth
- * PMPCON = 0x888;   // Darker but better depth 
- * PMPCON = 0x899;   // Darker even better depth
- * PMPCON = 0x8aa;   // too dark even better depth
- * PMPCON = 0X8cc;   // Way too dark
- */
-
-/* As CONTRAST value increases the greater the depth perception and
- * the darker the colors.
- */
diff --git a/include/asm-arm/arch-l7200/pmu.h b/include/asm-arm/arch-l7200/pmu.h
deleted file mode 100644
index 57faea7..0000000
--- a/include/asm-arm/arch-l7200/pmu.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/****************************************************************************/
-/*
- *  linux/include/asm-arm/arch-l7200/pmu.h
- *
- *   Registers and  helper functions for the L7200 Link-Up Systems
- *   Power Management Unit (PMU).
- *
- *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define PMU_OFF   0x00050000  /* Offset from IO_START to the PMU registers. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define PMU_START (IO_START + PMU_OFF)  /* Physical addr. of the PMU reg. */
-#define PMU_BASE  (IO_BASE  + PMU_OFF)  /* Virtual addr. of the PMU reg. */
-
-
-/* Define the PMU registers for use by device drivers and the kernel. */
-
-typedef struct {
-     unsigned int CURRENT;  /* Current configuration register */
-     unsigned int NEXT;     /* Next configuration register */
-     unsigned int reserved;
-     unsigned int RUN;      /* Run configuration register */
-     unsigned int COMM;     /* Configuration command register */
-     unsigned int SDRAM;    /* SDRAM configuration bypass register */
-} pmu_interface;
-
-#define PMU ((volatile pmu_interface *)(PMU_BASE))
-
-
-/* Macro's for reading the common register fields. */
-
-#define GET_TRANSOP(reg)  ((reg >> 25) & 0x03) /* Bits 26-25 */
-#define GET_OSCEN(reg)    ((reg >> 16) & 0x01)
-#define GET_OSCMUX(reg)   ((reg >> 15) & 0x01)
-#define GET_PLLMUL(reg)   ((reg >>  9) & 0x3f) /* Bits 14-9 */
-#define GET_PLLEN(reg)    ((reg >>  8) & 0x01)
-#define GET_PLLMUX(reg)   ((reg >>  7) & 0x01)
-#define GET_BCLK_DIV(reg) ((reg >>  3) & 0x03) /* Bits 4-3 */
-#define GET_SDRB_SEL(reg) ((reg >>  2) & 0x01)
-#define GET_SDRF_SEL(reg) ((reg >>  1) & 0x01)
-#define GET_FASTBUS(reg)  (reg & 0x1)
-
-/* CFG_NEXT register */
-
-#define CFG_NEXT_CLOCKRECOVERY ((PMU->NEXT >> 18) & 0x7f)   /* Bits 24-18 */
-#define CFG_NEXT_INTRET        ((PMU->NEXT >> 17) & 0x01)
-#define CFG_NEXT_SDR_STOP      ((PMU->NEXT >>  6) & 0x01)
-#define CFG_NEXT_SYSCLKEN      ((PMU->NEXT >>  5) & 0x01)
-
-/* Useful field values that can be used to construct the
- * CFG_NEXT and CFG_RUN registers.
- */
-
-#define TRANSOP_NOP      0<<25  /* NOCHANGE_NOSTALL */
-#define NOCHANGE_STALL   1<<25
-#define CHANGE_NOSTALL   2<<25
-#define CHANGE_STALL     3<<25
-
-#define INTRET           1<<17
-#define OSCEN            1<<16
-#define OSCMUX           1<<15
-
-/* PLL frequencies */
-
-#define PLLMUL_0         0<<9         /*  3.6864 MHz */
-#define PLLMUL_1         1<<9         /*  ?????? MHz */
-#define PLLMUL_5         5<<9         /*  18.432 MHz */
-#define PLLMUL_10       10<<9         /*  36.864 MHz */
-#define PLLMUL_18       18<<9         /*  ?????? MHz */
-#define PLLMUL_20       20<<9         /*  73.728 MHz */
-#define PLLMUL_32       32<<9         /*  ?????? MHz */
-#define PLLMUL_35       35<<9         /* 129.024 MHz */
-#define PLLMUL_36       36<<9         /*  ?????? MHz */
-#define PLLMUL_39       39<<9         /*  ?????? MHz */
-#define PLLMUL_40       40<<9         /* 147.456 MHz */
-
-/* Clock recovery times */
-
-#define CRCLOCK_1        1<<18
-#define CRCLOCK_2        2<<18
-#define CRCLOCK_4        4<<18
-#define CRCLOCK_8        8<<18
-#define CRCLOCK_16      16<<18
-#define CRCLOCK_32      32<<18
-#define CRCLOCK_63      63<<18
-#define CRCLOCK_127    127<<18
-
-#define PLLEN            1<<8
-#define PLLMUX           1<<7
-#define SDR_STOP         1<<6
-#define SYSCLKEN         1<<5
-
-#define BCLK_DIV_4       2<<3
-#define BCLK_DIV_2       1<<3
-#define BCLK_DIV_1       0<<3
-
-#define SDRB_SEL         1<<2
-#define SDRF_SEL         1<<1
-#define FASTBUS          1<<0
-
-
-/* CFG_SDRAM */
-
-#define SDRREFFQ         1<<0  /* Only if SDRSTOPRQ is not set. */
-#define SDRREFACK        1<<1  /* Read-only */
-#define SDRSTOPRQ        1<<2  /* Only if SDRREFFQ is not set. */
-#define SDRSTOPACK       1<<3  /* Read-only */
-#define PICEN            1<<4  /* Enable Co-procesor */
-#define PICTEST          1<<5
-
-#define GET_SDRREFFQ    ((PMU->SDRAM >> 0) & 0x01)
-#define GET_SDRREFACK   ((PMU->SDRAM >> 1) & 0x01) /* Read-only */
-#define GET_SDRSTOPRQ   ((PMU->SDRAM >> 2) & 0x01)
-#define GET_SDRSTOPACK  ((PMU->SDRAM >> 3) & 0x01) /* Read-only */
-#define GET_PICEN       ((PMU->SDRAM >> 4) & 0x01)
-#define GET_PICTEST     ((PMU->SDRAM >> 5) & 0x01)
diff --git a/include/asm-arm/arch-l7200/serial.h b/include/asm-arm/arch-l7200/serial.h
deleted file mode 100644
index defb8b7..0000000
--- a/include/asm-arm/arch-l7200/serial.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/serial.h
- *
- * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  03-20-2000  SJH     Created
- *  03-26-2000  SJH     Added flags for serial ports
- *  03-27-2000  SJH     Corrected BASE_BAUD value
- *  04-14-2000  RS      Made register addr dependent on IO_BASE
- *  05-03-2000  SJH     Complete rewrite
- *  05-09-2000	SJH	Stripped out architecture specific serial stuff
- *                      and placed it in a separate file
- *  07-28-2000	SJH	Moved base baud rate variable
- */
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-/*
- * This assumes you have a 3.6864 MHz clock for your UART.
- */
-#define BASE_BAUD	3686400
-
-/*
- * Standard COM flags
- */
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-#define STD_SERIAL_PORT_DEFNS		\
-	/* MAGIC UART CLK   PORT       IRQ     FLAGS */			\
-	{ 0, BASE_BAUD, UART1_BASE, IRQ_UART_1, STD_COM_FLAGS },  /* ttyLU0 */ \
-	{ 0, BASE_BAUD, UART2_BASE, IRQ_UART_2, STD_COM_FLAGS },  /* ttyLU1 */ \
-
-#define EXTRA_SERIAL_PORT_DEFNS
-
-#endif
diff --git a/include/asm-arm/arch-l7200/serial_l7200.h b/include/asm-arm/arch-l7200/serial_l7200.h
deleted file mode 100644
index b1008a9..0000000
--- a/include/asm-arm/arch-l7200/serial_l7200.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/serial_l7200.h
- *
- * Copyright (c) 2000 Steven Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  05-09-2000	SJH	Created
- */
-#ifndef __ASM_ARCH_SERIAL_L7200_H
-#define __ASM_ARCH_SERIAL_L7200_H
-
-#include <asm/arch/memory.h>
-
-/*
- * This assumes you have a 3.6864 MHz clock for your UART.
- */
-#define BASE_BAUD 3686400
-
-/*
- * UART base register addresses
- */
-#define UART1_BASE	(IO_BASE + 0x00044000)
-#define UART2_BASE	(IO_BASE + 0x00045000)
-
-/*
- * UART register offsets
- */
-#define UARTDR			0x00	/* Tx/Rx data */
-#define RXSTAT			0x04	/* Rx status */
-#define H_UBRLCR		0x08	/* mode register high */
-#define M_UBRLCR		0x0C	/* mode reg mid (MSB of baud)*/
-#define L_UBRLCR		0x10	/* mode reg low (LSB of baud)*/
-#define UARTCON			0x14	/* control register */
-#define UARTFLG			0x18	/* flag register */
-#define UARTINTSTAT		0x1C	/* FIFO IRQ status register */
-#define UARTINTMASK		0x20	/* FIFO IRQ mask register */
-
-/*
- * UART baud rate register values
- */
-#define BR_110			0x827
-#define BR_1200			0x06e
-#define BR_2400			0x05f
-#define BR_4800			0x02f
-#define BR_9600			0x017
-#define BR_14400		0x00f
-#define BR_19200		0x00b
-#define BR_38400		0x005
-#define BR_57600		0x003
-#define BR_76800 		0x002
-#define BR_115200		0x001
-
-/*
- * Receiver status register (RXSTAT) mask values
- */
-#define RXSTAT_NO_ERR		0x00	/* No error */
-#define RXSTAT_FRM_ERR		0x01	/* Framing error */
-#define RXSTAT_PAR_ERR		0x02	/* Parity error */
-#define RXSTAT_OVR_ERR		0x04	/* Overrun error */
-
-/*
- * High byte of UART bit rate and line control register (H_UBRLCR) values
- */
-#define UBRLCR_BRK		0x01	/* generate break on tx */
-#define UBRLCR_PEN		0x02	/* enable parity */
-#define UBRLCR_PDIS		0x00	/* disable parity */
-#define UBRLCR_EVEN		0x04	/* 1= even parity,0 = odd parity */
-#define UBRLCR_STP2		0x08	/* transmit 2 stop bits */
-#define UBRLCR_FIFO		0x10	/* enable FIFO */
-#define UBRLCR_LEN5		0x60	/* word length5 */
-#define UBRLCR_LEN6		0x40	/* word length6 */
-#define UBRLCR_LEN7		0x20	/* word length7 */
-#define UBRLCR_LEN8		0x00	/* word length8 */
-
-/*
- * UART control register (UARTCON) values
- */
-#define UARTCON_UARTEN		0x01	/* Enable UART */
-#define UARTCON_DMAONERR	0x08	/* Mask RxDmaRq when errors occur */
-
-/*
- * UART flag register (UARTFLG) mask values
- */
-#define UARTFLG_UTXFF		0x20	/* Transmit FIFO full */
-#define UARTFLG_URXFE		0x10	/* Receiver FIFO empty */
-#define UARTFLG_UBUSY		0x08	/* Transmitter busy */
-#define UARTFLG_DCD		0x04	/* Data carrier detect */
-#define UARTFLG_DSR		0x02	/* Data set ready */
-#define UARTFLG_CTS		0x01	/* Clear to send */
-
-/*
- * UART interrupt status/clear registers (UARTINTSTAT/CLR) values
- */
-#define UART_TXINT		0x01	/* TX interrupt */
-#define UART_RXINT		0x02	/* RX interrupt */
-#define UART_RXERRINT		0x04	/* RX error interrupt */
-#define UART_MSINT		0x08	/* Modem Status interrupt */
-#define UART_UDINT		0x10	/* UART Disabled interrupt */
-#define UART_ALLIRQS		0x1f	/* All interrupts */
-
-#endif
diff --git a/include/asm-arm/arch-l7200/sib.h b/include/asm-arm/arch-l7200/sib.h
deleted file mode 100644
index bf4364e..0000000
--- a/include/asm-arm/arch-l7200/sib.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/****************************************************************************/
-/*
- *  linux/include/asm-arm/arch-l7200/sib.h
- *
- *  Registers and helper functions for the Serial Interface Bus.
- *
- *  (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define SIB_OFF   0x00040000  /* Offset from IO_START to the SIB reg's. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define SIB_START (IO_START + SIB_OFF) /* Physical addr of the SIB reg. */
-#define SIB_BASE  (IO_BASE  + SIB_OFF) /* Virtual addr of the SIB reg.  */
-
-/* Offsets from the start of the SIB for all the registers. */
-
-/* Define the SIB registers for use by device drivers and the kernel. */
-
-typedef struct
-{
-     unsigned int MCCR;    /* SIB Control Register           Offset: 0x00 */
-     unsigned int RES1;    /* Reserved                       Offset: 0x04 */
-     unsigned int MCDR0;   /* SIB Data Register 0            Offset: 0x08 */
-     unsigned int MCDR1;   /* SIB Data Register 1            Offset: 0x0c */
-     unsigned int MCDR2;   /* SIB Data Register 2 (UCB1x00)  Offset: 0x10 */
-     unsigned int RES2;    /* Reserved                       Offset: 0x14 */
-     unsigned int MCSR;    /* SIB Status Register            Offset: 0x18 */
-} SIB_Interface;
-
-#define SIB ((volatile SIB_Interface *) (SIB_BASE))
-
-/* MCCR */
-
-#define INTERNAL_FREQ   9216000  /* Hertz */
-#define AUDIO_FREQ         5000  /* Hertz */
-#define TELECOM_FREQ       5000  /* Hertz */
-
-#define AUDIO_DIVIDE    (INTERNAL_FREQ / (32 * AUDIO_FREQ))
-#define TELECOM_DIVIDE  (INTERNAL_FREQ / (32 * TELECOM_FREQ))
-
-#define MCCR_ASD57      AUDIO_DIVIDE
-#define MCCR_TSD57      (TELECOM_DIVIDE << 8)
-#define MCCR_MCE        (1 << 16)             /* SIB enable */
-#define MCCR_ECS        (1 << 17)             /* External Clock Select */
-#define MCCR_ADM        (1 << 18)             /* A/D Data Sampling */
-#define MCCR_PMC        (1 << 26)             /* PIN Multiplexer Control */
-
-
-#define GET_ASD ((SIB->MCCR >>  0) & 0x3f) /* Audio Sample Rate Div. */
-#define GET_TSD ((SIB->MCCR >>  8) & 0x3f) /* Telcom Sample Rate Div. */
-#define GET_MCE ((SIB->MCCR >> 16) & 0x01) /* SIB Enable */
-#define GET_ECS ((SIB->MCCR >> 17) & 0x01) /* External Clock Select */
-#define GET_ADM ((SIB->MCCR >> 18) & 0x01) /* A/D Data Sampling Mode */
-#define GET_TTM ((SIB->MCCR >> 19) & 0x01) /* Telco Trans. FIFO I mask */ 
-#define GET_TRM ((SIB->MCCR >> 20) & 0x01) /* Telco Recv. FIFO I mask */
-#define GET_ATM ((SIB->MCCR >> 21) & 0x01) /* Audio Trans. FIFO I mask */ 
-#define GET_ARM ((SIB->MCCR >> 22) & 0x01) /* Audio Recv. FIFO I mask */
-#define GET_LBM ((SIB->MCCR >> 23) & 0x01) /* Loop Back Mode */
-#define GET_ECP ((SIB->MCCR >> 24) & 0x03) /* Extern. Clck Prescale sel */
-#define GET_PMC ((SIB->MCCR >> 26) & 0x01) /* PIN Multiplexer Control */
-#define GET_ERI ((SIB->MCCR >> 27) & 0x01) /* External Read Interrupt */
-#define GET_EWI ((SIB->MCCR >> 28) & 0x01) /* External Write Interrupt */
-
-/* MCDR0 */
-
-#define AUDIO_RECV     ((SIB->MCDR0 >> 4) & 0xfff)
-#define AUDIO_WRITE(v) ((SIB->MCDR0 = (v & 0xfff) << 4))
-
-/* MCDR1 */
-
-#define TELECOM_RECV     ((SIB->MCDR1 >> 2) & 032fff)
-#define TELECOM_WRITE(v) ((SIB->MCDR1 = (v & 0x3fff) << 2))
-
-
-/* MCSR */
-
-#define MCSR_ATU (1 << 4)  /* Audio Transmit FIFO Underrun */
-#define MCSR_ARO (1 << 5)  /* Audio Receive  FIFO Underrun */
-#define MCSR_TTU (1 << 6)  /* TELECOM Transmit FIFO Underrun */
-#define MCSR_TRO (1 << 7)  /* TELECOM Receive  FIFO Underrun */
-
-#define MCSR_CLEAR_UNDERUN_BITS (MCSR_ATU | MCSR_ARO | MCSR_TTU | MCSR_TRO)
-
-
-#define GET_ATS ((SIB->MCSR >>  0) & 0x01) /* Audio Transmit FIFO Service Req*/
-#define GET_ARS ((SIB->MCSR >>  1) & 0x01) /* Audio Recv FIFO Service Request*/
-#define GET_TTS ((SIB->MCSR >>  2) & 0x01) /* TELECOM Transmit FIFO  Flag */
-#define GET_TRS ((SIB->MCSR >>  3) & 0x01) /* TELECOM Recv FIFO Service Req. */
-#define GET_ATU ((SIB->MCSR >>  4) & 0x01) /* Audio Transmit FIFO Underrun */
-#define GET_ARO ((SIB->MCSR >>  5) & 0x01) /* Audio Receive  FIFO Underrun */
-#define GET_TTU ((SIB->MCSR >>  6) & 0x01) /* TELECOM Transmit FIFO Underrun */
-#define GET_TRO ((SIB->MCSR >>  7) & 0x01) /* TELECOM Receive  FIFO Underrun */
-#define GET_ANF ((SIB->MCSR >>  8) & 0x01) /* Audio Transmit FIFO not full */
-#define GET_ANE ((SIB->MCSR >>  9) & 0x01) /* Audio Receive FIFO not empty */
-#define GET_TNF ((SIB->MCSR >> 10) & 0x01) /* Telecom Transmit FIFO not full */
-#define GET_TNE ((SIB->MCSR >> 11) & 0x01) /* Telecom Receive FIFO not empty */
-#define GET_CWC ((SIB->MCSR >> 12) & 0x01) /* Codec Write Complete */
-#define GET_CRC ((SIB->MCSR >> 13) & 0x01) /* Codec Read Complete */
-#define GET_ACE ((SIB->MCSR >> 14) & 0x01) /* Audio Codec Enabled */
-#define GET_TCE ((SIB->MCSR >> 15) & 0x01) /* Telecom Codec Enabled */
-
-/* MCDR2 */
-
-#define MCDR2_rW               (1 << 16)
-
-#define WRITE_MCDR2(reg, data) (SIB->MCDR2 =((reg<<17)|MCDR2_rW|(data&0xffff)))
-#define MCDR2_WRITE_COMPLETE   GET_CWC
-
-#define INITIATE_MCDR2_READ(reg) (SIB->MCDR2 = (reg << 17))
-#define MCDR2_READ_COMPLETE      GET_CRC
-#define MCDR2_READ               (SIB->MCDR2 & 0xffff)
diff --git a/include/asm-arm/arch-l7200/sys-clock.h b/include/asm-arm/arch-l7200/sys-clock.h
deleted file mode 100644
index 771c774..0000000
--- a/include/asm-arm/arch-l7200/sys-clock.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/****************************************************************************/
-/*
- *  linux/include/asm-arm/arch-l7200/sys-clock.h
- *
- *   Registers and  helper functions for the L7200 Link-Up Systems
- *   System clocks.
- *
- *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define SYS_CLOCK_OFF   0x00050030  /* Offset from IO_START. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF)  /* Physical address */
-#define SYS_CLOCK_BASE  (IO_BASE  + SYS_CLOCK_OFF)  /* Virtual address  */
-
-/* Define the interface to the SYS_CLOCK */
-
-typedef struct
-{
-     unsigned int ENABLE;
-     unsigned int ESYNC;
-     unsigned int SELECT;
-} sys_clock_interface;
-
-#define SYS_CLOCK   ((volatile sys_clock_interface *)(SYS_CLOCK_BASE))
-
-//#define CLOCK_EN    (*(volatile unsigned long *)(PMU_BASE+CLOCK_EN_OFF))
-//#define CLOCK_ESYNC (*(volatile unsigned long *)(PMU_BASE+CLOCK_ESYNC_OFF))
-//#define CLOCK_SEL   (*(volatile unsigned long *)(PMU_BASE+CLOCK_SEL_OFF))
-
-/* SYS_CLOCK -> ENABLE */
-
-#define SYN_EN          1<<0
-#define B18M_EN         1<<1
-#define CLK3M6_EN       1<<2
-#define BUART_EN        1<<3
-#define CLK18MU_EN      1<<4
-#define FIR_EN          1<<5
-#define MIRN_EN         1<<6
-#define UARTM_EN        1<<7
-#define SIBADC_EN       1<<8
-#define ALTD_EN         1<<9
-#define CLCLK_EN        1<<10
-
-/* SYS_CLOCK -> SELECT */
-
-#define CLK18M_DIV      1<<0
-#define MIR_SEL         1<<1
-#define SSP_SEL         1<<4
-#define MM_DIV          1<<5
-#define MM_SEL          1<<6
-#define ADC_SEL_2       0<<7
-#define ADC_SEL_4       1<<7
-#define ADC_SEL_8       3<<7
-#define ADC_SEL_16      7<<7
-#define ADC_SEL_32      0x0f<<7
-#define ADC_SEL_64      0x1f<<7
-#define ADC_SEL_128     0x3f<<7
-#define ALTD_SEL        1<<13
diff --git a/include/asm-arm/arch-l7200/system.h b/include/asm-arm/arch-l7200/system.h
deleted file mode 100644
index efef950..0000000
--- a/include/asm-arm/arch-l7200/system.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/system.h
- *
- * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog
- *  03-21-2000  SJH	Created
- *  04-26-2000  SJH	Fixed functions
- *  05-03-2000  SJH	Removed usage of obsolete 'iomd.h'
- *  05-31-2000  SJH	Properly implemented 'arch_idle'
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-
-static inline void arch_idle(void)
-{
-	*(unsigned long *)(IO_BASE + 0x50004) = 1;	/* idle mode */
-}
-
-static inline void arch_reset(char mode)
-{
-	if (mode == 's') {
-		cpu_reset(0);
-	}
-}
-
-#endif
diff --git a/include/asm-arm/arch-l7200/time.h b/include/asm-arm/arch-l7200/time.h
deleted file mode 100644
index ea22f7f..0000000
--- a/include/asm-arm/arch-l7200/time.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/time.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   01-02-2000	RS	Created l7200 version, derived from rpc code
- *   05-03-2000	SJH	Complete rewrite
- */
-#ifndef _ASM_ARCH_TIME_H
-#define _ASM_ARCH_TIME_H
-
-#include <asm/arch/irqs.h>
-
-/*
- * RTC base register address
- */
-#define RTC_BASE	(IO_BASE_2 + 0x2000)
-
-/*
- * RTC registers
- */
-#define RTC_RTCDR	(*(volatile unsigned char *) (RTC_BASE + 0x000))
-#define RTC_RTCMR	(*(volatile unsigned char *) (RTC_BASE + 0x004))
-#define RTC_RTCS	(*(volatile unsigned char *) (RTC_BASE + 0x008))
-#define RTC_RTCC	(*(volatile unsigned char *) (RTC_BASE + 0x008))
-#define RTC_RTCDV	(*(volatile unsigned char *) (RTC_BASE + 0x00c))
-#define RTC_RTCCR	(*(volatile unsigned char *) (RTC_BASE + 0x010))
-
-/*
- * RTCCR register values
- */
-#define RTC_RATE_32	0x00      /* 32 Hz tick */
-#define RTC_RATE_64	0x10      /* 64 Hz tick */
-#define RTC_RATE_128	0x20      /* 128 Hz tick */
-#define RTC_RATE_256	0x30      /* 256 Hz tick */
-#define RTC_EN_ALARM	0x01      /* Enable alarm */
-#define RTC_EN_TIC	0x04      /* Enable counter */
-#define RTC_EN_STWDOG	0x08      /* Enable watchdog */
-
-/*
- * Handler for RTC timer interrupt
- */
-static irqreturn_t
-timer_interrupt(int irq, void *dev_id)
-{
-	struct pt_regs *regs = get_irq_regs();
-	do_timer(1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(regs));
-#endif
-	do_profile(regs);
-	RTC_RTCC = 0;				/* Clear interrupt */
-
-	return IRQ_HANDLED;
-}
-
-/*
- * Set up RTC timer interrupt, and return the current time in seconds.
- */
-void __init time_init(void)
-{
-	RTC_RTCC = 0;				/* Clear interrupt */
-
-	timer_irq.handler = timer_interrupt;
-
-	setup_irq(IRQ_RTC_TICK, &timer_irq);
-
-	RTC_RTCCR = RTC_RATE_128 | RTC_EN_TIC;	/* Set rate and enable timer */
-}
-
-#endif
diff --git a/include/asm-arm/arch-l7200/timex.h b/include/asm-arm/arch-l7200/timex.h
deleted file mode 100644
index 3c32026..0000000
--- a/include/asm-arm/arch-l7200/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/timex.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * 04-21-2000  RS Created file
- * 05-03-2000 SJH Tick rate was wrong
- *
- */
-
-/*
- * On the ARM720T, clock ticks are set to 128 Hz.
- *
- * NOTE: The actual RTC value is set in 'time.h' which
- *       must be changed when choosing a different tick
- *       rate. The value of HZ in 'param.h' must also
- *       be changed to match below.
- */
-#define CLOCK_TICK_RATE		128
diff --git a/include/asm-arm/arch-l7200/uncompress.h b/include/asm-arm/arch-l7200/uncompress.h
deleted file mode 100644
index c5ba0ad..0000000
--- a/include/asm-arm/arch-l7200/uncompress.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/uncompress.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  05-01-2000	SJH	Created
- *  05-13-2000	SJH	Filled in function bodies
- *  07-26-2000	SJH	Removed hard coded baud rate
- */
-
-#include <asm/arch/hardware.h>
-
-#define IO_UART  IO_START + 0x00044000
-
-#define __raw_writeb(v,p)	(*(volatile unsigned char *)(p) = (v))
-#define __raw_readb(p)		(*(volatile unsigned char *)(p))
-
-static inline void putc(int c)
-{
-	while(__raw_readb(IO_UART + 0x18) & 0x20 ||
-	      __raw_readb(IO_UART + 0x18) & 0x08)
-		barrier();
-
-	__raw_writeb(c, IO_UART + 0x00);
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void arch_decomp_setup(void)
-{
-	__raw_writeb(0x00, IO_UART + 0x08);	/* Set HSB */
-	__raw_writeb(0x00, IO_UART + 0x20);	/* Disable IRQs */
-	__raw_writeb(0x01, IO_UART + 0x14);	/* Enable UART */
-}
-
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-l7200/vmalloc.h b/include/asm-arm/arch-l7200/vmalloc.h
deleted file mode 100644
index 816231e..0000000
--- a/include/asm-arm/arch-l7200/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/vmalloc.h
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-lh7a40x/clocks.h b/include/asm-arm/arch-lh7a40x/clocks.h
deleted file mode 100644
index 7d0ba18..0000000
--- a/include/asm-arm/arch-lh7a40x/clocks.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/clocks.h
- *
- *  Copyright (C) 2004 Marc Singer
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_CLOCKS_H
-#define __ASM_ARCH_CLOCKS_H
-
-unsigned int fclkfreq_get (void);
-unsigned int hclkfreq_get (void);
-unsigned int pclkfreq_get (void);
-
-#endif  /* _ASM_ARCH_CLOCKS_H */
diff --git a/include/asm-arm/arch-lh7a40x/constants.h b/include/asm-arm/arch-lh7a40x/constants.h
deleted file mode 100644
index 51de96e..0000000
--- a/include/asm-arm/arch-lh7a40x/constants.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/constants.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *  Copyright (C) 2004 Logic Product Development
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_CONSTANTS_H
-#define __ASM_ARCH_CONSTANTS_H
-
-
-/* Addressing constants */
-
-	/* SoC CPU IO addressing */
-#define IO_PHYS			(0x80000000)
-#define IO_VIRT			(0xf8000000)
-#define IO_SIZE			(0x0000B000)
-
-#ifdef CONFIG_MACH_KEV7A400
-# define CPLD_PHYS		(0x20000000)
-# define CPLD_VIRT		(0xf2000000)
-# define CPLD_SIZE		PAGE_SIZE
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-
-# define IOBARRIER_PHYS		0x10000000 /* Second bank, fastest timing */
-# define IOBARRIER_VIRT		0xf0000000
-# define IOBARRIER_SIZE		PAGE_SIZE
-
-# define CF_PHYS		0x60200000
-# define CF_VIRT		0xf6020000
-# define CF_SIZE		(8*1024)
-
-	/* The IO mappings for the LPD CPLD are, unfortunately, sparse.  */
-# define CPLDX_PHYS(x)		(0x70000000 | ((x) << 20))
-# define CPLDX_VIRT(x)		(0xf7000000 | ((x) << 16))
-# define CPLD00_PHYS		CPLDX_PHYS (0x00) /* Wired LAN */
-# define CPLD00_VIRT		CPLDX_VIRT (0x00)
-# define CPLD00_SIZE		PAGE_SIZE
-# define CPLD02_PHYS		CPLDX_PHYS (0x02)
-# define CPLD02_VIRT		CPLDX_VIRT (0x02)
-# define CPLD02_SIZE		PAGE_SIZE
-# define CPLD06_PHYS		CPLDX_PHYS (0x06)
-# define CPLD06_VIRT		CPLDX_VIRT (0x06)
-# define CPLD06_SIZE		PAGE_SIZE
-# define CPLD08_PHYS		CPLDX_PHYS (0x08)
-# define CPLD08_VIRT		CPLDX_VIRT (0x08)
-# define CPLD08_SIZE		PAGE_SIZE
-# define CPLD0A_PHYS		CPLDX_PHYS (0x0a)
-# define CPLD0A_VIRT		CPLDX_VIRT (0x0a)
-# define CPLD0A_SIZE		PAGE_SIZE
-# define CPLD0C_PHYS		CPLDX_PHYS (0x0c)
-# define CPLD0C_VIRT		CPLDX_VIRT (0x0c)
-# define CPLD0C_SIZE		PAGE_SIZE
-# define CPLD0E_PHYS		CPLDX_PHYS (0x0e)
-# define CPLD0E_VIRT		CPLDX_VIRT (0x0e)
-# define CPLD0E_SIZE		PAGE_SIZE
-# define CPLD10_PHYS		CPLDX_PHYS (0x10)
-# define CPLD10_VIRT		CPLDX_VIRT (0x10)
-# define CPLD10_SIZE		PAGE_SIZE
-# define CPLD12_PHYS		CPLDX_PHYS (0x12)
-# define CPLD12_VIRT		CPLDX_VIRT (0x12)
-# define CPLD12_SIZE		PAGE_SIZE
-# define CPLD14_PHYS		CPLDX_PHYS (0x14)
-# define CPLD14_VIRT		CPLDX_VIRT (0x14)
-# define CPLD14_SIZE		PAGE_SIZE
-# define CPLD16_PHYS		CPLDX_PHYS (0x16)
-# define CPLD16_VIRT		CPLDX_VIRT (0x16)
-# define CPLD16_SIZE		PAGE_SIZE
-# define CPLD18_PHYS		CPLDX_PHYS (0x18)
-# define CPLD18_VIRT		CPLDX_VIRT (0x18)
-# define CPLD18_SIZE		PAGE_SIZE
-# define CPLD1A_PHYS		CPLDX_PHYS (0x1a)
-# define CPLD1A_VIRT		CPLDX_VIRT (0x1a)
-# define CPLD1A_SIZE		PAGE_SIZE
-#endif
-
-	/* Timing constants */
-
-#define	XTAL_IN			14745600	/* 14.7456 MHz crystal */
-#define PLL_CLOCK		(XTAL_IN * 21)	/* 309 MHz PLL clock */
-#define MAX_HCLK_KHZ		100000		/* HCLK max limit ~100MHz */
-#define HCLK			(99993600)
-//#define HCLK			(119808000)
-
-#endif /* __ASM_ARCH_CONSTANTS_H */
diff --git a/include/asm-arm/arch-lh7a40x/debug-macro.S b/include/asm-arm/arch-lh7a40x/debug-macro.S
deleted file mode 100644
index 421dcd6..0000000
--- a/include/asm-arm/arch-lh7a40x/debug-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/* linux/include/asm-arm/arch-lh7a40x/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-	@ It is not known if this will be appropriate for every 40x
-	@ board.
-
-		.macro  addruart,rx
-		mrc     p15, 0, \rx, c1, c0
-		tst     \rx, #1                 @ MMU enabled?
-		mov     \rx, #0x00000700        @ offset from base
-		orreq   \rx, \rx, #0x80000000   @ physical base
-		orrne   \rx, \rx, #0xf8000000   @ virtual base
-		.endm
-
-		.macro  senduart,rd,rx
-		strb    \rd, [\rx]              @ DATA
-		.endm
-
-		.macro  busyuart,rd,rx          @ spin while busy
-1001:		ldr     \rd, [\rx, #0x10]       @ STATUS
-		tst     \rd, #1 << 3            @ BUSY (TX FIFO not empty)
-		bne     1001b                   @ yes, spin
-		.endm
-
-		.macro  waituart,rd,rx          @ wait for Tx FIFO room
-1001:		ldrb    \rd, [\rx, #0x10]       @ STATUS
-		tst     \rd, #1 << 5            @ TXFF (TX FIFO full)
-		bne     1001b                   @ yes, spin
-		.endm
diff --git a/include/asm-arm/arch-lh7a40x/dma.h b/include/asm-arm/arch-lh7a40x/dma.h
deleted file mode 100644
index a8cbd14..0000000
--- a/include/asm-arm/arch-lh7a40x/dma.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/dma.h
- *
- *  Copyright (C) 2005 Marc Singer
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-typedef enum {
-	DMA_M2M0	= 0,
-	DMA_M2M1	= 1,
-	DMA_M2P0	= 2,	/* Tx */
-	DMA_M2P1	= 3,	/* Rx */
-	DMA_M2P2	= 4,	/* Tx */
-	DMA_M2P3	= 5,	/* Rx */
-	DMA_M2P4	= 6,	/* Tx - AC97 */
-	DMA_M2P5	= 7,	/* Rx - AC97 */
-	DMA_M2P6	= 8,	/* Tx */
-	DMA_M2P7	= 9,	/* Rx */
-} dma_device_t;
-
-#define DMA_LENGTH_MAX		((64*1024) - 4) /* bytes */
-
-#define DMAC_GCA		__REG(DMAC_PHYS + 0x2b80)
-#define DMAC_GIR		__REG(DMAC_PHYS + 0x2bc0)
-
-#define DMAC_GIR_MMI1		(1<<11)
-#define DMAC_GIR_MMI0		(1<<10)
-#define DMAC_GIR_MPI8		(1<<9)
-#define DMAC_GIR_MPI9		(1<<8)
-#define DMAC_GIR_MPI6		(1<<7)
-#define DMAC_GIR_MPI7		(1<<6)
-#define DMAC_GIR_MPI4		(1<<5)
-#define DMAC_GIR_MPI5		(1<<4)
-#define DMAC_GIR_MPI2		(1<<3)
-#define DMAC_GIR_MPI3		(1<<2)
-#define DMAC_GIR_MPI0		(1<<1)
-#define DMAC_GIR_MPI1		(1<<0)
-
-#define DMAC_M2P0		0x0000
-#define DMAC_M2P1		0x0040
-#define DMAC_M2P2		0x0080
-#define DMAC_M2P3		0x00c0
-#define DMAC_M2P4		0x0240
-#define DMAC_M2P5		0x0200
-#define DMAC_M2P6		0x02c0
-#define DMAC_M2P7		0x0280
-#define DMAC_M2P8		0x0340
-#define DMAC_M2P9		0x0300
-#define DMAC_M2M0		0x0100
-#define DMAC_M2M1		0x0140
-
-#define DMAC_P_PCONTROL(c)	__REG(DMAC_PHYS + (c) + 0x00)
-#define DMAC_P_PINTERRUPT(c)	__REG(DMAC_PHYS + (c) + 0x04)
-#define DMAC_P_PPALLOC(c)	__REG(DMAC_PHYS + (c) + 0x08)
-#define DMAC_P_PSTATUS(c)	__REG(DMAC_PHYS + (c) + 0x0c)
-#define DMAC_P_REMAIN(c)	__REG(DMAC_PHYS + (c) + 0x14)
-#define DMAC_P_MAXCNT0(c)	__REG(DMAC_PHYS + (c) + 0x20)
-#define DMAC_P_BASE0(c)		__REG(DMAC_PHYS + (c) + 0x24)
-#define DMAC_P_CURRENT0(c)	__REG(DMAC_PHYS + (c) + 0x28)
-#define DMAC_P_MAXCNT1(c)	__REG(DMAC_PHYS + (c) + 0x30)
-#define DMAC_P_BASE1(c)		__REG(DMAC_PHYS + (c) + 0x34)
-#define DMAC_P_CURRENT1(c)	__REG(DMAC_PHYS + (c) + 0x38)
-
-#define DMAC_PCONTROL_ENABLE	(1<<4)
-
-#define DMAC_PORT_USB		0
-#define DMAC_PORT_SDMMC		1
-#define DMAC_PORT_AC97_1	2
-#define DMAC_PORT_AC97_2	3
-#define DMAC_PORT_AC97_3	4
-#define DMAC_PORT_UART1		6
-#define DMAC_PORT_UART2		7
-#define DMAC_PORT_UART3		8
-
-#define DMAC_PSTATUS_CURRSTATE_SHIFT	4
-#define DMAC_PSTATUS_CURRSTATE_MASK	0x3
-
-#define DMAC_PSTATUS_NEXTBUF	 (1<<6)
-#define DMAC_PSTATUS_STALLRINT	 (1<<0)
-
-#define DMAC_INT_CHE		 (1<<3)
-#define DMAC_INT_NFB		 (1<<1)
-#define DMAC_INT_STALL		 (1<<0)
diff --git a/include/asm-arm/arch-lh7a40x/entry-macro.S b/include/asm-arm/arch-lh7a40x/entry-macro.S
deleted file mode 100644
index 34468e0..0000000
--- a/include/asm-arm/arch-lh7a40x/entry-macro.S
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * include/asm-arm/arch-lh7a40x/entry-macro.S
- *
- * Low-level IRQ helper macros for LH7A40x platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-#include <asm/arch/irqs.h>
-
-/* In order to allow there to be support for both of the processor
-   classes at the same time, we make a hack here that isn't very
-   pretty.  At startup, the link pointed to with the
-   branch_irq_lh7a400 symbol is replaced with a NOP when the CPU is
-   detected as a lh7a404.
-
-   *** FIXME: we should clean this up so that there is only one
-	      implementation for each CPU's design.
-
-*/
-
-#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404)
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-branch_irq_lh7a400: b 1000f
-
-@ Implementation of the LH7A404 get_irqnr_and_base.
-
-		mov	\irqnr, #0			@ VIC1 irq base
-		mov	\base, #io_p2v(0x80000000)	@ APB registers
-		add	\base, \base, #0x8000
-		ldr	\tmp, [\base, #0x0030]		@ VIC1_VECTADDR
-		tst	\tmp, #VA_VECTORED		@ Direct vectored
-		bne	1002f
-		tst	\tmp, #VA_VIC1DEFAULT		@ Default vectored VIC1
-		ldrne	\irqstat, [\base, #0]		@ VIC1_IRQSTATUS
-		bne	1001f
-		add	\base, \base, #(0xa000 - 0x8000)
-		ldr	\tmp, [\base, #0x0030]		@ VIC2_VECTADDR
-		tst	\tmp, #VA_VECTORED		@ Direct vectored
-		bne	1002f
-		ldr	\irqstat, [\base, #0]		@ VIC2_IRQSTATUS
-		mov	\irqnr, #32			@ VIC2 irq base
-
-1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
-		bcs	1008f				@ Bit set; irq found
-		add	\irqnr, \irqnr, #1
-		bne	1001b				@ Until no bits
-		b	1009f				@ Nothing?  Hmm.
-1002:		and	\irqnr, \tmp, #0x3f		@ Mask for valid bits
-1008:		movs	\irqstat, #1			@ Force !Z
-		str	\tmp, [\base, #0x0030]		@ Clear vector
-		b	1009f
-
-@ Implementation of the LH7A400 get_irqnr_and_base.
-
-1000:		mov	\irqnr, #0
-		mov	\base, #io_p2v(0x80000000)	@ APB registers
-		ldr	\irqstat, [\base, #0x500]	@ PIC INTSR
-
-1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
-		bcs	1008f				@ Bit set; irq found
-		add	\irqnr, \irqnr, #1
-		bne	1001b				@ Until no bits
-		b	1009f				@ Nothing?  Hmm.
-1008:		movs	\irqstat, #1			@ Force !Z
-
-1009:
-               .endm
-
-
-
-#elif defined (CONFIG_ARCH_LH7A400)
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	\irqnr, #0
-		mov	\base, #io_p2v(0x80000000)	@ APB registers
-		ldr	\irqstat, [\base, #0x500]	@ PIC INTSR
-
-1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
-		bcs	1008f				@ Bit set; irq found
-		add	\irqnr, \irqnr, #1
-		bne	1001b				@ Until no bits
-		b	1009f				@ Nothing?  Hmm.
-1008:		movs	\irqstat, #1			@ Force !Z
-1009:
-               .endm
-
-#elif defined(CONFIG_ARCH_LH7A404)
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	\irqnr, #0			@ VIC1 irq base
-		mov	\base, #io_p2v(0x80000000)	@ APB registers
-		add	\base, \base, #0x8000
-		ldr	\tmp, [\base, #0x0030]		@ VIC1_VECTADDR
-		tst	\tmp, #VA_VECTORED		@ Direct vectored
-		bne	1002f
-		tst	\tmp, #VA_VIC1DEFAULT		@ Default vectored VIC1
-		ldrne	\irqstat, [\base, #0]		@ VIC1_IRQSTATUS
-		bne	1001f
-		add	\base, \base, #(0xa000 - 0x8000)
-		ldr	\tmp, [\base, #0x0030]		@ VIC2_VECTADDR
-		tst	\tmp, #VA_VECTORED		@ Direct vectored
-		bne	1002f
-		ldr	\irqstat, [\base, #0]		@ VIC2_IRQSTATUS
-		mov	\irqnr, #32			@ VIC2 irq base
-
-1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
-		bcs	1008f				@ Bit set; irq found
-		add	\irqnr, \irqnr, #1
-		bne	1001b				@ Until no bits
-		b	1009f				@ Nothing?  Hmm.
-1002:		and	\irqnr, \tmp, #0x3f		@ Mask for valid bits
-1008:		movs	\irqstat, #1			@ Force !Z
-		str	\tmp, [\base, #0x0030]		@ Clear vector
-1009:
-               .endm
-#endif
-
-
diff --git a/include/asm-arm/arch-lh7a40x/hardware.h b/include/asm-arm/arch-lh7a40x/hardware.h
deleted file mode 100644
index e9ff74f..0000000
--- a/include/asm-arm/arch-lh7a40x/hardware.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/hardware.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  [ Substantially cribbed from include/asm-arm/arch-pxa/hardware.h ]
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>		/* Added for the sake of amba-clcd driver */
-
-#define io_p2v(x) (0xf0000000 | (((x) & 0xfff00000) >> 4) | ((x) & 0x0000ffff))
-#define io_v2p(x) (             (((x) & 0x0fff0000) << 4) | ((x) & 0x0000ffff))
-
-#ifdef __ASSEMBLY__
-
-# define __REG(x)	io_p2v(x)
-# define __PREG(x)	io_v2p(x)
-
-#else
-
-# if 0
-#  define __REG(x)	(*((volatile u32 *)io_p2v(x)))
-# else
-/*
- * This __REG() version gives the same results as the one above,  except
- * that we are fooling gcc somehow so it generates far better and smaller
- * assembly code for access to contigous registers.  It's a shame that gcc
- * doesn't guess this by itself.
- */
-#include <asm/types.h>
-typedef struct { volatile u32 offset[4096]; } __regbase;
-# define __REGP(x)	((__regbase *)((x)&~4095))->offset[((x)&4095)>>2]
-# define __REG(x)	__REGP(io_p2v(x))
-typedef struct { volatile u16 offset[4096]; } __regbase16;
-# define __REGP16(x)	((__regbase16 *)((x)&~4095))->offset[((x)&4095)>>1]
-# define __REG16(x)	__REGP16(io_p2v(x))
-typedef struct { volatile u8 offset[4096]; } __regbase8;
-# define __REGP8(x)	((__regbase8 *)((x)&~4095))->offset[(x)&4095]
-# define __REG8(x)	__REGP8(io_p2v(x))
-#endif
-
-/* Let's kick gcc's ass again... */
-# define __REG2(x,y)	\
-	( __builtin_constant_p(y) ? (__REG((x) + (y))) \
-				  : (*(volatile u32 *)((u32)&__REG(x) + (y))) )
-
-# define __PREG(x)	(io_v2p((u32)&(x)))
-
-#endif
-
-#define MASK_AND_SET(v,m,s)	(v) = ((v)&~(m))|(s)
-
-#include "registers.h"
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-lh7a40x/io.h b/include/asm-arm/arch-lh7a40x/io.h
deleted file mode 100644
index 8d591d0..0000000
--- a/include/asm-arm/arch-lh7a40x/io.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/io.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/* No ISA or PCI bus on this machine. */
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-#endif /* __ASM_ARCH_IO_H */
diff --git a/include/asm-arm/arch-lh7a40x/irqs.h b/include/asm-arm/arch-lh7a40x/irqs.h
deleted file mode 100644
index afe8c7c..0000000
--- a/include/asm-arm/arch-lh7a40x/irqs.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/irqs.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *  Copyright (C) 2004 Logic Product Development
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-/* It is to be seen whether or not we can build a kernel for more than
- * one board.  For the time being, these macros assume that we cannot.
- * Thus, it is OK to ifdef machine/board specific IRQ assignments.
- */
-
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-
-#define FIQ_START	80
-
-#if defined (CONFIG_ARCH_LH7A400)
-
-  /* FIQs */
-
-# define IRQ_GPIO0FIQ	0	/* GPIO External FIQ Interrupt on F0 */
-# define IRQ_BLINT	1	/* Battery Low */
-# define IRQ_WEINT	2	/* Watchdog Timer, WDT overflow	*/
-# define IRQ_MCINT	3	/* Media Change, MEDCHG pin rising */
-
-  /* IRQs */
-
-# define IRQ_CSINT	4	/* Audio Codec (ACI) */
-# define IRQ_GPIO1INTR	5	/* GPIO External IRQ Interrupt on F1 */
-# define IRQ_GPIO2INTR	6	/* GPIO External IRQ Interrupt on F2 */
-# define IRQ_GPIO3INTR	7	/* GPIO External IRQ Interrupt on F3 */
-# define IRQ_T1UI	8	/* Timer 1 underflow */
-# define IRQ_T2UI	9	/* Timer 2 underflow */
-# define IRQ_RTCMI	10
-# define IRQ_TINTR	11	/* Clock State Controller 64 Hz tick (CSC) */
-# define IRQ_UART1INTR	12
-# define IRQ_UART2INTR	13
-# define IRQ_LCDINTR	14
-# define IRQ_SSIEOT	15	/* Synchronous Serial Interface (SSI) */
-# define IRQ_UART3INTR	16
-# define IRQ_SCIINTR	17	/* Smart Card Interface (SCI) */
-# define IRQ_AACINTR	18	/* Advanced Audio Codec (AAC) */
-# define IRQ_MMCINTR	19	/* Multimedia Card (MMC) */
-# define IRQ_USBINTR	20
-# define IRQ_DMAINTR	21
-# define IRQ_T3UI	22	/* Timer 3 underflow */
-# define IRQ_GPIO4INTR	23	/* GPIO External IRQ Interrupt on F4 */
-# define IRQ_GPIO5INTR	24	/* GPIO External IRQ Interrupt on F5 */
-# define IRQ_GPIO6INTR	25	/* GPIO External IRQ Interrupt on F6 */
-# define IRQ_GPIO7INTR	26	/* GPIO External IRQ Interrupt on F7 */
-# define IRQ_BMIINTR	27	/* Battery Monitor Interface (BMI) */
-
-# define NR_IRQ_CPU	28	/* IRQs directly recognized by CPU */
-
-	/* Given IRQ, return GPIO interrupt number 0-7 */
-# define IRQ_TO_GPIO(i)  ((i) \
-	- (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
-	- (((i) > IRQ_GPIO0INTR) ? IRQ_GPIO1INTR - IRQ_GPIO0INTR - 1 : 0))
-
-#endif
-
-#if defined (CONFIG_ARCH_LH7A404)
-
-# define IRQ_BROWN	0	/* Brownout */
-# define IRQ_WDTINTR	1	/* Watchdog Timer */
-# define IRQ_COMMRX	2	/* ARM Comm Rx for Debug */
-# define IRQ_COMMTX	3	/* ARM Comm Tx for Debug */
-# define IRQ_T1UI	4	/* Timer 1 underflow */
-# define IRQ_T2UI	5	/* Timer 2 underflow */
-# define IRQ_CSINT	6	/* Codec Interrupt (shared by AAC on 404) */
-# define IRQ_DMAM2P0	7	/* -- DMA Memory to Peripheral */
-# define IRQ_DMAM2P1	8
-# define IRQ_DMAM2P2	9
-# define IRQ_DMAM2P3	10
-# define IRQ_DMAM2P4	11
-# define IRQ_DMAM2P5	12
-# define IRQ_DMAM2P6	13
-# define IRQ_DMAM2P7	14
-# define IRQ_DMAM2P8	15
-# define IRQ_DMAM2P9	16
-# define IRQ_DMAM2M0	17	/* -- DMA Memory to Memory */
-# define IRQ_DMAM2M1	18
-# define IRQ_GPIO0INTR	19	/* -- GPIOF Interrupt */
-# define IRQ_GPIO1INTR	20
-# define IRQ_GPIO2INTR	21
-# define IRQ_GPIO3INTR	22
-# define IRQ_SOFT_V1_23	23	/* -- Unassigned */
-# define IRQ_SOFT_V1_24	24
-# define IRQ_SOFT_V1_25	25
-# define IRQ_SOFT_V1_26	26
-# define IRQ_SOFT_V1_27	27
-# define IRQ_SOFT_V1_28	28
-# define IRQ_SOFT_V1_29	29
-# define IRQ_SOFT_V1_30	30
-# define IRQ_SOFT_V1_31	31
-
-# define IRQ_BLINT	32	/* Battery Low */
-# define IRQ_BMIINTR	33	/* Battery Monitor */
-# define IRQ_MCINTR	34	/* Media Change */
-# define IRQ_TINTR	35	/* 64Hz Tick */
-# define IRQ_WEINT	36	/* Watchdog Expired */
-# define IRQ_RTCMI	37	/* Real-time Clock Match */
-# define IRQ_UART1INTR	38	/* UART1 Interrupt (including error) */
-# define IRQ_UART1ERR	39	/* UART1 Error */
-# define IRQ_UART2INTR	40	/* UART2 Interrupt (including error) */
-# define IRQ_UART2ERR	41	/* UART2 Error */
-# define IRQ_UART3INTR	42	/* UART3 Interrupt (including error) */
-# define IRQ_UART3ERR	43	/* UART3 Error */
-# define IRQ_SCIINTR	44	/* Smart Card */
-# define IRQ_TSCINTR	45	/* Touchscreen */
-# define IRQ_KMIINTR	46	/* Keyboard/Mouse (PS/2) */
-# define IRQ_GPIO4INTR	47	/* -- GPIOF Interrupt */
-# define IRQ_GPIO5INTR	48
-# define IRQ_GPIO6INTR	49
-# define IRQ_GPIO7INTR	50
-# define IRQ_T3UI	51	/* Timer 3 underflow */
-# define IRQ_LCDINTR	52	/* LCD Controller */
-# define IRQ_SSPINTR	53	/* Synchronous Serial Port */
-# define IRQ_SDINTR	54	/* Secure Digital Port (MMC) */
-# define IRQ_USBINTR	55	/* USB Device Port */
-# define IRQ_USHINTR	56	/* USB Host Port */
-# define IRQ_SOFT_V2_25	57	/* -- Unassigned */
-# define IRQ_SOFT_V2_26	58
-# define IRQ_SOFT_V2_27	59
-# define IRQ_SOFT_V2_28	60
-# define IRQ_SOFT_V2_29	61
-# define IRQ_SOFT_V2_30	62
-# define IRQ_SOFT_V2_31	63
-
-# define NR_IRQ_CPU	64	/* IRQs directly recognized by CPU */
-
-	/* Given IRQ, return GPIO interrupt number 0-7 */
-# define IRQ_TO_GPIO(i)  ((i) \
-	- (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
-	- IRQ_GPIO0INTR)
-
-			/* Vector Address constants */
-# define VA_VECTORED	0x100	/* Set for vectored interrupt */
-# define VA_VIC1DEFAULT	0x200	/* Set as default VECTADDR for VIC1 */
-# define VA_VIC2DEFAULT	0x400	/* Set as default VECTADDR for VIC2 */
-
-#endif
-
-  /* IRQ aliases */
-
-#if !defined (IRQ_GPIO0INTR)
-# define IRQ_GPIO0INTR	IRQ_GPIO0FIQ
-#endif
-#define IRQ_TICK	IRQ_TINTR
-#define IRQ_PCC1_RDY	IRQ_GPIO6INTR	/* PCCard 1 ready */
-#define IRQ_PCC2_RDY	IRQ_GPIO7INTR	/* PCCard 2 ready */
-#define IRQ_USB		IRQ_USBINTR	/* USB device */
-
-#ifdef CONFIG_MACH_KEV7A400
-# define IRQ_TS		IRQ_GPIOFIQ	/* Touchscreen */
-# define IRQ_CPLD	IRQ_GPIO1INTR	/* CPLD cascade */
-# define IRQ_PCC1_CD	IRQ_GPIO_F2	/* PCCard 1 card detect */
-# define IRQ_PCC2_CD	IRQ_GPIO_F3	/* PCCard 2 card detect */
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-# define IRQ_CPLD_V28	IRQ_GPIO7INTR	/* CPLD cascade through GPIO_PF7 */
-# define IRQ_CPLD_V34	IRQ_GPIO3INTR	/* CPLD cascade through GPIO_PF3 */
-#endif
-
-  /* System specific IRQs */
-
-#define IRQ_BOARD_START NR_IRQ_CPU
-
-#ifdef CONFIG_MACH_KEV7A400
-# define IRQ_KEV7A400_CPLD	IRQ_BOARD_START
-# define NR_IRQ_BOARD		5
-# define IRQ_KEV7A400_MMC_CD	IRQ_KEV7A400_CPLD + 0	/* MMC Card Detect */
-# define IRQ_KEV7A400_RI2	IRQ_KEV7A400_CPLD + 1	/* Ring Indicator 2 */
-# define IRQ_KEV7A400_IDE_CF	IRQ_KEV7A400_CPLD + 2	/* Compact Flash (?) */
-# define IRQ_KEV7A400_ETH_INT	IRQ_KEV7A400_CPLD + 3	/* Ethernet chip */
-# define IRQ_KEV7A400_INT	IRQ_KEV7A400_CPLD + 4
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-# define IRQ_LPD7A40X_CPLD	IRQ_BOARD_START
-# define NR_IRQ_BOARD		2
-# define IRQ_LPD7A40X_ETH_INT	IRQ_LPD7A40X_CPLD + 0	/* Ethernet chip */
-# define IRQ_LPD7A400_TS	IRQ_LPD7A40X_CPLD + 1	/* Touch screen */
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400)
-# define IRQ_TOUCH		IRQ_LPD7A400_TS
-#endif
-
-#define NR_IRQS		(NR_IRQ_CPU + NR_IRQ_BOARD)
-
-#endif
diff --git a/include/asm-arm/arch-lh7a40x/memory.h b/include/asm-arm/arch-lh7a40x/memory.h
deleted file mode 100644
index 9b0c801..0000000
--- a/include/asm-arm/arch-lh7a40x/memory.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/memory.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- *
- *  Refer to <file:Documentation/arm/Sharp-LH/SDRAM> for more information.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0xc0000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	 __virt_to_phys(x)
-#define __bus_to_virt(x)	 __phys_to_virt(x)
-
-#ifdef CONFIG_DISCONTIGMEM
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-#  define KVADDR_TO_NID(addr) \
-  (  ((((unsigned long) (addr) - PAGE_OFFSET) >> 24) &  1)\
-   | ((((unsigned long) (addr) - PAGE_OFFSET) >> 25) & ~1))
-# else  /* 2 banks per node */
-#  define KVADDR_TO_NID(addr) \
-      (((unsigned long) (addr) - PAGE_OFFSET) >> 26)
-# endif
-
-/*
- * Given a page frame number, convert it to a node id.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-#  define PFN_TO_NID(pfn) \
-  (((((pfn) - PHYS_PFN_OFFSET) >> (24 - PAGE_SHIFT)) &  1)\
- | ((((pfn) - PHYS_PFN_OFFSET) >> (25 - PAGE_SHIFT)) & ~1))
-# else  /* 2 banks per node */
-#  define PFN_TO_NID(pfn) \
-    (((pfn) - PHYS_PFN_OFFSET) >> (26 - PAGE_SHIFT))
-#endif
-
-/*
- * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
- * and returns the index corresponding to the appropriate page in the
- * node's mem_map.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-#  define LOCAL_MAP_NR(addr) \
-       (((unsigned long)(addr) & 0x003fffff) >> PAGE_SHIFT)
-# else  /* 2 banks per node */
-#  define LOCAL_MAP_NR(addr) \
-       (((unsigned long)(addr) & 0x01ffffff) >> PAGE_SHIFT)
-# endif
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-lh7a40x/registers.h b/include/asm-arm/arch-lh7a40x/registers.h
deleted file mode 100644
index b4f09b3..0000000
--- a/include/asm-arm/arch-lh7a40x/registers.h
+++ /dev/null
@@ -1,224 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/registers.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *  Copyright (C) 2004 Logic Product Development
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <asm/arch/constants.h>
-
-#ifndef __ASM_ARCH_REGISTERS_H
-#define __ASM_ARCH_REGISTERS_H
-
-
-	/* Physical register base addresses */
-
-#define AC97C_PHYS	(0x80000000)	/* AC97 Controller */
-#define MMC_PHYS	(0x80000100)	/* Multimedia Card Controller */
-#define USB_PHYS	(0x80000200)	/* USB Client */
-#define SCI_PHYS	(0x80000300)	/* Secure Card Interface */
-#define CSC_PHYS	(0x80000400)	/* Clock/State Controller  */
-#define INTC_PHYS	(0x80000500)	/* Interrupt Controller */
-#define UART1_PHYS	(0x80000600)	/* UART1 Controller */
-#define SIR_PHYS	(0x80000600)	/* IR Controller, same are UART1 */
-#define UART2_PHYS	(0x80000700)	/* UART2 Controller */
-#define UART3_PHYS	(0x80000800)	/* UART3 Controller */
-#define DCDC_PHYS	(0x80000900)	/* DC to DC Controller */
-#define ACI_PHYS	(0x80000a00)	/* Audio Codec Interface */
-#define SSP_PHYS	(0x80000b00)	/* Synchronous ... */
-#define TIMER_PHYS	(0x80000c00)	/* Timer Controller */
-#define RTC_PHYS	(0x80000d00)	/* Real-time Clock */
-#define GPIO_PHYS	(0x80000e00)	/* General Purpose IO */
-#define BMI_PHYS	(0x80000f00)	/* Battery Monitor Interface */
-#define HRTFTC_PHYS	(0x80001000)	/* High-res TFT Controller (LH7A400) */
-#define ALI_PHYS	(0x80001000)	/* Advanced LCD Interface (LH7A404) */
-#define WDT_PHYS	(0x80001400)	/* Watchdog Timer */
-#define SMC_PHYS	(0x80002000)	/* Static Memory Controller */
-#define SDRC_PHYS	(0x80002400)	/* SDRAM Controller */
-#define DMAC_PHYS	(0x80002800)	/* DMA Controller */
-#define CLCDC_PHYS	(0x80003000)	/* Color LCD Controller */
-
-	/* Physical registers of the LH7A404 */
-
-#define ADC_PHYS	(0x80001300)	/* A/D & Touchscreen Controller */
-#define VIC1_PHYS	(0x80008000)	/* Vectored Interrupt Controller 1 */
-#define USBH_PHYS	(0x80009000)	/* USB OHCI host controller */
-#define VIC2_PHYS	(0x8000a000)	/* Vectored Interrupt Controller 2 */
-
-/*#define KBD_PHYS	(0x80000e00) */
-/*#define LCDICP_PHYS	(0x80001000) */
-
-
-	/* Clock/State Controller register */
-
-#define CSC_PWRSR	__REG(CSC_PHYS + 0x00) /* Reset register & ID */
-#define CSC_PWRCNT	__REG(CSC_PHYS + 0x04) /* Power control */
-#define CSC_CLKSET	__REG(CSC_PHYS + 0x20) /* Clock speed control */
-#define CSC_USBDRESET	__REG(CSC_PHYS + 0x4c) /* USB Device resets */
-
-#define CSC_PWRCNT_USBH_EN	(1<<28)	/* USB Host power enable */
-#define CSC_PWRCNT_DMAC_M2M1_EN	(1<<27)
-#define CSC_PWRCNT_DMAC_M2M0_EN	(1<<26)
-#define CSC_PWRCNT_DMAC_M2P8_EN	(1<<25)
-#define CSC_PWRCNT_DMAC_M2P9_EN	(1<<24)
-#define CSC_PWRCNT_DMAC_M2P6_EN	(1<<23)
-#define CSC_PWRCNT_DMAC_M2P7_EN	(1<<22)
-#define CSC_PWRCNT_DMAC_M2P4_EN	(1<<21)
-#define CSC_PWRCNT_DMAC_M2P5_EN	(1<<20)
-#define CSC_PWRCNT_DMAC_M2P2_EN	(1<<19)
-#define CSC_PWRCNT_DMAC_M2P3_EN	(1<<18)
-#define CSC_PWRCNT_DMAC_M2P0_EN	(1<<17)
-#define CSC_PWRCNT_DMAC_M2P1_EN	(1<<16)
-
-#define CSC_PWRSR_CHIPMAN_SHIFT	(24)
-#define CSC_PWRSR_CHIPMAN_MASK	(0xff)
-#define CSC_PWRSR_CHIPID_SHIFT	(16)
-#define CSC_PWRSR_CHIPID_MASK	(0xff)
-
-#define CSC_USBDRESET_APBRESETREG	(1<<1)
-#define CSC_USBDRESET_IORESETREG	(1<<0)
-
-	/* Interrupt Controller registers */
-
-#define INTC_INTSR	__REG(INTC_PHYS + 0x00)	/* Status */
-#define INTC_INTRSR	__REG(INTC_PHYS + 0x04)	/* Raw Status */
-#define INTC_INTENS	__REG(INTC_PHYS + 0x08)	/* Enable Set */
-#define INTC_INTENC	__REG(INTC_PHYS + 0x0c)	/* Enable Clear */
-
-
-	/* Vectored Interrupted Controller registers */
-
-#define VIC1_IRQSTATUS	__REG(VIC1_PHYS + 0x00)
-#define VIC1_FIQSTATUS	__REG(VIC1_PHYS + 0x04)
-#define VIC1_RAWINTR	__REG(VIC1_PHYS + 0x08)
-#define VIC1_INTSEL	__REG(VIC1_PHYS + 0x0c)
-#define VIC1_INTEN	__REG(VIC1_PHYS + 0x10)
-#define VIC1_INTENCLR	__REG(VIC1_PHYS + 0x14)
-#define VIC1_SOFTINT	__REG(VIC1_PHYS + 0x18)
-#define VIC1_SOFTINTCLR	__REG(VIC1_PHYS + 0x1c)
-#define VIC1_PROTECT	__REG(VIC1_PHYS + 0x20)
-#define VIC1_VECTADDR	__REG(VIC1_PHYS + 0x30)
-#define VIC1_NVADDR	__REG(VIC1_PHYS + 0x34)
-#define VIC1_VAD0	__REG(VIC1_PHYS + 0x100)
-#define VIC1_VECTCNTL0	__REG(VIC1_PHYS + 0x200)
-#define VIC2_IRQSTATUS	__REG(VIC2_PHYS + 0x00)
-#define VIC2_FIQSTATUS	__REG(VIC2_PHYS + 0x04)
-#define VIC2_RAWINTR	__REG(VIC2_PHYS + 0x08)
-#define VIC2_INTSEL	__REG(VIC2_PHYS + 0x0c)
-#define VIC2_INTEN	__REG(VIC2_PHYS + 0x10)
-#define VIC2_INTENCLR	__REG(VIC2_PHYS + 0x14)
-#define VIC2_SOFTINT	__REG(VIC2_PHYS + 0x18)
-#define VIC2_SOFTINTCLR	__REG(VIC2_PHYS + 0x1c)
-#define VIC2_PROTECT	__REG(VIC2_PHYS + 0x20)
-#define VIC2_VECTADDR	__REG(VIC2_PHYS + 0x30)
-#define VIC2_NVADDR	__REG(VIC2_PHYS + 0x34)
-#define VIC2_VAD0	__REG(VIC2_PHYS + 0x100)
-#define VIC2_VECTCNTL0	__REG(VIC2_PHYS + 0x200)
-
-#define VIC_CNTL_ENABLE	(0x20)
-
-	/* USB Host registers (Open HCI compatible) */
-
-#define USBH_CMDSTATUS	__REG(USBH_PHYS + 0x08)
-
-
-	/* GPIO registers */
-
-#define GPIO_INTTYPE1	__REG(GPIO_PHYS + 0x4c)	/* Interrupt Type 1 (Edge) */
-#define GPIO_INTTYPE2	__REG(GPIO_PHYS + 0x50)	/* Interrupt Type 2 */
-#define GPIO_GPIOFEOI	__REG(GPIO_PHYS + 0x54)	/* GPIO End-of-Interrupt */
-#define GPIO_GPIOINTEN	__REG(GPIO_PHYS + 0x58)	/* GPIO Interrupt Enable */
-#define GPIO_INTSTATUS	__REG(GPIO_PHYS + 0x5c)	/* GPIO Interrupt Status */
-#define GPIO_PINMUX	__REG(GPIO_PHYS + 0x2c)
-#define GPIO_PADD	__REG(GPIO_PHYS + 0x10)
-#define GPIO_PAD	__REG(GPIO_PHYS + 0x00)
-#define GPIO_PCD	__REG(GPIO_PHYS + 0x08)
-#define GPIO_PCDD	__REG(GPIO_PHYS + 0x18)
-#define GPIO_PEDD	__REG(GPIO_PHYS + 0x24)
-#define GPIO_PED	__REG(GPIO_PHYS + 0x20)
-
-
-	/* Static Memory Controller registers */
-
-#define SMC_BCR0	__REG(SMC_PHYS + 0x00)	/* Bank 0 Configuration */
-#define SMC_BCR1	__REG(SMC_PHYS + 0x04)	/* Bank 1 Configuration */
-#define SMC_BCR2	__REG(SMC_PHYS + 0x08)	/* Bank 2 Configuration */
-#define SMC_BCR3	__REG(SMC_PHYS + 0x0C)	/* Bank 3 Configuration */
-#define SMC_BCR6	__REG(SMC_PHYS + 0x18)	/* Bank 6 Configuration */
-#define SMC_BCR7	__REG(SMC_PHYS + 0x1c)	/* Bank 7 Configuration */
-
-
-#ifdef CONFIG_MACH_KEV7A400
-# define CPLD_RD_OPT_DIP_SW	__REG16(CPLD_PHYS + 0x00) /* Read Option SW */
-# define CPLD_WR_IO_BRD_CTL	__REG16(CPLD_PHYS + 0x00) /* Write Control */
-# define CPLD_RD_PB_KEYS	__REG16(CPLD_PHYS + 0x02) /* Read Btn Keys */
-# define CPLD_LATCHED_INTS	__REG16(CPLD_PHYS + 0x04) /* Read INTR stat. */
-# define CPLD_CL_INT		__REG16(CPLD_PHYS + 0x04) /* Clear INTR stat */
-# define CPLD_BOOT_MMC_STATUS	__REG16(CPLD_PHYS + 0x06) /* R/O */
-# define CPLD_RD_KPD_ROW_SENSE	__REG16(CPLD_PHYS + 0x08)
-# define CPLD_WR_PB_INT_MASK	__REG16(CPLD_PHYS + 0x08)
-# define CPLD_RD_BRD_DISP_SW	__REG16(CPLD_PHYS + 0x0a)
-# define CPLD_WR_EXT_INT_MASK	__REG16(CPLD_PHYS + 0x0a)
-# define CPLD_LCD_PWR_CNTL	__REG16(CPLD_PHYS + 0x0c)
-# define CPLD_SEVEN_SEG		__REG16(CPLD_PHYS + 0x0e) /* 7 seg. LED mask */
-
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-
-# define CPLD_CONTROL		__REG16(CPLD02_PHYS)
-# define CPLD_SPI_DATA		__REG16(CPLD06_PHYS)
-# define CPLD_SPI_CONTROL	__REG16(CPLD08_PHYS)
-# define CPLD_SPI_EEPROM	__REG16(CPLD0A_PHYS)
-# define CPLD_INTERRUPTS	__REG16(CPLD0C_PHYS) /* IRQ mask/status */
-# define CPLD_BOOT_MODE		__REG16(CPLD0E_PHYS)
-# define CPLD_FLASH		__REG16(CPLD10_PHYS)
-# define CPLD_POWER_MGMT	__REG16(CPLD12_PHYS)
-# define CPLD_REVISION		__REG16(CPLD14_PHYS)
-# define CPLD_GPIO_EXT		__REG16(CPLD16_PHYS)
-# define CPLD_GPIO_DATA		__REG16(CPLD18_PHYS)
-# define CPLD_GPIO_DIR		__REG16(CPLD1A_PHYS)
-
-#endif
-
-	/* Timer registers */
-
-#define TIMER_LOAD1	__REG(TIMER_PHYS + 0x00) /* Timer 1 initial value */
-#define TIMER_VALUE1	__REG(TIMER_PHYS + 0x04) /* Timer 1 current value */
-#define TIMER_CONTROL1	__REG(TIMER_PHYS + 0x08) /* Timer 1 control word */
-#define TIMER_EOI1	__REG(TIMER_PHYS + 0x0c) /* Timer 1 interrupt clear */
-
-#define TIMER_LOAD2	__REG(TIMER_PHYS + 0x20) /* Timer 2 initial value */
-#define TIMER_VALUE2	__REG(TIMER_PHYS + 0x24) /* Timer 2 current value */
-#define TIMER_CONTROL2	__REG(TIMER_PHYS + 0x28) /* Timer 2 control word */
-#define TIMER_EOI2	__REG(TIMER_PHYS + 0x2c) /* Timer 2 interrupt clear */
-
-#define TIMER_BUZZCON	__REG(TIMER_PHYS + 0x40) /* Buzzer configuration */
-
-#define TIMER_LOAD3	__REG(TIMER_PHYS + 0x80) /* Timer 3 initial value */
-#define TIMER_VALUE3	__REG(TIMER_PHYS + 0x84) /* Timer 3 current value */
-#define TIMER_CONTROL3	__REG(TIMER_PHYS + 0x88) /* Timer 3 control word */
-#define TIMER_EOI3	__REG(TIMER_PHYS + 0x8c) /* Timer 3 interrupt clear */
-
-#define TIMER_C_ENABLE		(1<<7)
-#define TIMER_C_PERIODIC	(1<<6)
-#define TIMER_C_FREERUNNING	(0)
-#define TIMER_C_2KHZ		(0x00)		/* 1.986 kHz */
-#define TIMER_C_508KHZ		(0x08)
-
-	/* GPIO registers */
-
-#define GPIO_PFDD		__REG(GPIO_PHYS + 0x34)	/* PF direction */
-#define GPIO_INTTYPE1		__REG(GPIO_PHYS + 0x4c)	/* IRQ edge or lvl  */
-#define GPIO_INTTYPE2		__REG(GPIO_PHYS + 0x50)	/* IRQ activ hi/lo */
-#define GPIO_GPIOFEOI		__REG(GPIO_PHYS + 0x54)	/* GPIOF end of IRQ */
-#define GPIO_GPIOFINTEN		__REG(GPIO_PHYS + 0x58)	/* GPIOF IRQ enable */
-#define GPIO_INTSTATUS		__REG(GPIO_PHYS + 0x5c)	/* GPIOF IRQ latch */
-#define GPIO_RAWINTSTATUS	__REG(GPIO_PHYS + 0x60)	/* GPIOF IRQ raw */
-
-
-#endif  /* _ASM_ARCH_REGISTERS_H */
diff --git a/include/asm-arm/arch-lh7a40x/system.h b/include/asm-arm/arch-lh7a40x/system.h
deleted file mode 100644
index e1df8aa..0000000
--- a/include/asm-arm/arch-lh7a40x/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/system.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle ();
-}
-
-static inline void arch_reset(char mode)
-{
-	cpu_reset (0);
-}
diff --git a/include/asm-arm/arch-lh7a40x/timex.h b/include/asm-arm/arch-lh7a40x/timex.h
deleted file mode 100644
index fa726b6..0000000
--- a/include/asm-arm/arch-lh7a40x/timex.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/timex.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <asm/arch/constants.h>
-
-#define CLOCK_TICK_RATE		(PLL_CLOCK/6/16)
-
-/*
-#define CLOCK_TICK_RATE		3686400
-*/
diff --git a/include/asm-arm/arch-lh7a40x/uncompress.h b/include/asm-arm/arch-lh7a40x/uncompress.h
deleted file mode 100644
index 3d1ce04..0000000
--- a/include/asm-arm/arch-lh7a40x/uncompress.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/uncompress.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <asm/arch/registers.h>
-
-#ifndef UART_R_DATA
-# define UART_R_DATA	(0x00)
-#endif
-#ifndef UART_R_STATUS
-# define UART_R_STATUS	(0x10)
-#endif
-#define nTxRdy		(0x20)	/* Not TxReady (literally Tx FIFO full) */
-
-	/* Access UART with physical addresses before MMU is setup */
-#define UART_STATUS (*(volatile unsigned long*) (UART2_PHYS + UART_R_STATUS))
-#define UART_DATA   (*(volatile unsigned long*) (UART2_PHYS + UART_R_DATA))
-
-static inline void putc(int ch)
-{
-	while (UART_STATUS & nTxRdy)
-		barrier();
-	UART_DATA = ch;
-}
-
-static inline void flush(void)
-{
-}
-
-	/* NULL functions; we don't presently need them */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-lh7a40x/vmalloc.h b/include/asm-arm/arch-lh7a40x/vmalloc.h
deleted file mode 100644
index 8163e45..0000000
--- a/include/asm-arm/arch-lh7a40x/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/vmalloc.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-#define VMALLOC_END       (0xe8000000)
diff --git a/include/asm-arm/arch-loki/debug-macro.S b/include/asm-arm/arch-loki/debug-macro.S
deleted file mode 100644
index 585502e..0000000
--- a/include/asm-arm/arch-loki/debug-macro.S
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-loki/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/loki.h>
-
-	.macro	addruart,rx
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =LOKI_REGS_PHYS_BASE
-	ldrne	\rx, =LOKI_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-loki/dma.h b/include/asm-arm/arch-loki/dma.h
deleted file mode 100644
index 40a8c178..0000000
--- a/include/asm-arm/arch-loki/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/include/asm-arm/arch-loki/entry-macro.S b/include/asm-arm/arch-loki/entry-macro.S
deleted file mode 100644
index 693257c..0000000
--- a/include/asm-arm/arch-loki/entry-macro.S
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * include/asm-arm/arch-loki/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell Loki (88RC8480) platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/arch/loki.h>
-
-	.macro  disable_fiq
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IRQ_VIRT_BASE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqstat, [\base, #IRQ_CAUSE_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_OFF]
-	mov	\irqnr, #0
-	ands	\irqstat, \irqstat, \tmp
-	clzne	\irqnr, \irqstat
-	rsbne	\irqnr, \irqnr, #31
-	.endm
diff --git a/include/asm-arm/arch-loki/hardware.h b/include/asm-arm/arch-loki/hardware.h
deleted file mode 100644
index f65b01c..0000000
--- a/include/asm-arm/arch-loki/hardware.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * include/asm-arm/arch-loki/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "loki.h"
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/io.h b/include/asm-arm/arch-loki/io.h
deleted file mode 100644
index e7418a9..0000000
--- a/include/asm-arm/arch-loki/io.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-loki/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "loki.h"
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)((addr - LOKI_PCIE0_IO_PHYS_BASE)
-					+ LOKI_PCIE0_IO_VIRT_BASE);
-}
-
-#define __io(a)			__io(a)
-#define __mem_pci(a)		(a)
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/irqs.h b/include/asm-arm/arch-loki/irqs.h
deleted file mode 100644
index 7e49714..0000000
--- a/include/asm-arm/arch-loki/irqs.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * include/asm-arm/arch-loki/irqs.h
- *
- * IRQ definitions for Marvell Loki (88RC8480) SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include "loki.h"	/* need GPIO_MAX */
-
-/*
- * Interrupt Controller
- */
-#define IRQ_LOKI_PCIE_A_CPU_DRBL	0
-#define IRQ_LOKI_CPU_PCIE_A_DRBL	1
-#define IRQ_LOKI_PCIE_B_CPU_DRBL	2
-#define IRQ_LOKI_CPU_PCIE_B_DRBL	3
-#define IRQ_LOKI_COM_A_ERR		6
-#define IRQ_LOKI_COM_A_IN		7
-#define IRQ_LOKI_COM_A_OUT		8
-#define IRQ_LOKI_COM_B_ERR		9
-#define IRQ_LOKI_COM_B_IN		10
-#define IRQ_LOKI_COM_B_OUT		11
-#define IRQ_LOKI_DMA_A			12
-#define IRQ_LOKI_DMA_B			13
-#define IRQ_LOKI_SAS_A			14
-#define IRQ_LOKI_SAS_B			15
-#define IRQ_LOKI_DDR			16
-#define IRQ_LOKI_XOR			17
-#define IRQ_LOKI_BRIDGE			18
-#define IRQ_LOKI_PCIE_A_ERR		20
-#define IRQ_LOKI_PCIE_A_INT		21
-#define IRQ_LOKI_PCIE_B_ERR		22
-#define IRQ_LOKI_PCIE_B_INT		23
-#define IRQ_LOKI_GBE_A_INT		24
-#define IRQ_LOKI_GBE_B_INT		25
-#define IRQ_LOKI_DEV_ERR		26
-#define IRQ_LOKI_UART0			27
-#define IRQ_LOKI_UART1			28
-#define IRQ_LOKI_TWSI			29
-#define IRQ_LOKI_GPIO_23_0		30
-#define IRQ_LOKI_GPIO_25_24		31
-
-/*
- * Loki General Purpose Pins
- */
-#define IRQ_LOKI_GPIO_START	32
-#define NR_GPIO_IRQS		GPIO_MAX
-
-#define NR_IRQS			(IRQ_LOKI_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/loki.h b/include/asm-arm/arch-loki/loki.h
deleted file mode 100644
index 5dd05ee..0000000
--- a/include/asm-arm/arch-loki/loki.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * include/asm-arm/arch-loki/loki.h
- *
- * Generic definitions for Marvell Loki (88RC8480) SoC flavors
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_LOKI_H
-#define __ASM_ARCH_LOKI_H
-
-/*
- * Marvell Loki (88RC8480) address maps.
- *
- * phys
- * d0000000	on-chip peripheral registers
- * e0000000	PCIe 0 Memory space
- * e8000000	PCIe 1 Memory space
- * f0000000	PCIe 0 I/O space
- * f0100000	PCIe 1 I/O space
- *
- * virt		phys		size
- * fed00000	d0000000	1M	on-chip peripheral registers
- * fee00000	f0000000	64K	PCIe 0 I/O space
- * fef00000	f0100000	64K	PCIe 1 I/O space
- */
-
-#define LOKI_REGS_PHYS_BASE		0xd0000000
-#define LOKI_REGS_VIRT_BASE		0xfed00000
-#define LOKI_REGS_SIZE			SZ_1M
-
-#define LOKI_PCIE0_IO_PHYS_BASE		0xf0000000
-#define LOKI_PCIE0_IO_VIRT_BASE		0xfee00000
-#define LOKI_PCIE0_IO_BUS_BASE		0x00000000
-#define LOKI_PCIE0_IO_SIZE		SZ_64K
-
-#define LOKI_PCIE1_IO_PHYS_BASE		0xf0100000
-#define LOKI_PCIE1_IO_VIRT_BASE		0xfef00000
-#define LOKI_PCIE1_IO_BUS_BASE		0x00000000
-#define LOKI_PCIE1_IO_SIZE		SZ_64K
-
-#define LOKI_PCIE0_MEM_PHYS_BASE	0xe0000000
-#define LOKI_PCIE0_MEM_SIZE		SZ_128M
-
-#define LOKI_PCIE1_MEM_PHYS_BASE	0xe8000000
-#define LOKI_PCIE1_MEM_SIZE		SZ_128M
-
-/*
- * Register Map
- */
-#define DEV_BUS_PHYS_BASE	(LOKI_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE	(LOKI_REGS_VIRT_BASE | 0x10000)
-#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
-
-#define BRIDGE_VIRT_BASE	(LOKI_REGS_VIRT_BASE | 0x20000)
-#define  BRIDGE_REG(x)		(BRIDGE_VIRT_BASE | (x))
-#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-#define   SOFT_RESET_OUT_EN	0x00000004
-#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-#define   SOFT_RESET		0x00000001
-#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-#define   BRIDGE_INT_TIMER0	0x0002
-#define   BRIDGE_INT_TIMER1	0x0004
-#define   BRIDGE_INT_TIMER1_CLR	0x0004
-#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-#define   IRQ_CAUSE_OFF		0x0000
-#define   IRQ_MASK_OFF		0x0004
-#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
-
-#define PCIE0_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0x30000)
-
-#define PCIE1_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0x40000)
-
-#define SAS0_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0x80000)
-
-#define SAS1_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0x90000)
-
-#define GE0_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0xa0000)
-#define GE0_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0xa0000)
-
-#define GE1_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0xb0000)
-#define GE1_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0xb0000)
-
-#define DDR_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0xf0000)
-#define DDR_REG(x)		(DDR_VIRT_BASE | (x))
-
-
-#define GPIO_MAX		8
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/memory.h b/include/asm-arm/arch-loki/memory.h
deleted file mode 100644
index 835101e..0000000
--- a/include/asm-arm/arch-loki/memory.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * include/asm-arm/arch-loki/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET		UL(0x00000000)
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/system.h b/include/asm-arm/arch-loki/system.h
deleted file mode 100644
index a3568ac..0000000
--- a/include/asm-arm/arch-loki/system.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-loki/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/loki.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	/*
-	 * Enable soft reset to assert RSTOUTn.
-	 */
-	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
-	/*
-	 * Assert soft reset.
-	 */
-	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
-	while (1)
-		;
-}
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/timex.h b/include/asm-arm/arch-loki/timex.h
deleted file mode 100644
index 940014f..0000000
--- a/include/asm-arm/arch-loki/timex.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * include/asm-arm/arch-loki/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE		(100 * HZ)
-
-#define LOKI_TCLK		180000000
diff --git a/include/asm-arm/arch-loki/uncompress.h b/include/asm-arm/arch-loki/uncompress.h
deleted file mode 100644
index 89a0cf8..0000000
--- a/include/asm-arm/arch-loki/uncompress.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-loki/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/arch/loki.h>
-
-#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
-	unsigned char *base = SERIAL_BASE;
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		if (base[UART_LSR << 2] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
-	unsigned char *base = SERIAL_BASE;
-	unsigned char mask;
-	int i;
-
-	mask = UART_LSR_TEMT | UART_LSR_THRE;
-
-	for (i = 0; i < 0x1000; i++) {
-		if ((base[UART_LSR << 2] & mask) == mask)
-			break;
-		barrier();
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-loki/vmalloc.h b/include/asm-arm/arch-loki/vmalloc.h
deleted file mode 100644
index f5be062..0000000
--- a/include/asm-arm/arch-loki/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-loki/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe800000
diff --git a/include/asm-arm/arch-msm/board.h b/include/asm-arm/arch-msm/board.h
deleted file mode 100644
index 763051f..0000000
--- a/include/asm-arm/arch-msm/board.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* linux/include/asm-arm/arch-msm/board.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_BOARD_H
-#define __ASM_ARCH_MSM_BOARD_H
-
-#include <linux/types.h>
-
-/* platform device data structures */
-
-struct msm_mddi_platform_data
-{
-	void (*panel_power)(int on);
-	unsigned has_vsync_irq:1;
-};
-
-/* common init routines for use by arch/arm/mach-msm/board-*.c */
-
-void __init msm_add_devices(void);
-void __init msm_map_common_io(void);
-void __init msm_init_irq(void);
-void __init msm_init_gpio(void);
-
-#endif
diff --git a/include/asm-arm/arch-msm/debug-macro.S b/include/asm-arm/arch-msm/debug-macro.S
deleted file mode 100644
index e131b44..0000000
--- a/include/asm-arm/arch-msm/debug-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* include/asm-arm/arch-msm7200/debug-macro.S
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/msm_iomap.h>
-
-	.macro	addruart,rx
-	@ see if the MMU is enabled and select appropriate base address
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1
-	ldreq	\rx, =MSM_UART1_PHYS
-	ldrne	\rx, =MSM_UART1_BASE
-	.endm
-
-	.macro	senduart,rd,rx
-	str	\rd, [\rx, #0x0C]
-	.endm
-
-	.macro	waituart,rd,rx
-	@ wait for TX_READY
-1:	ldr	\rd, [\rx, #0x08]
-	tst	\rd, #0x04
-	beq	1b
-	.endm
-
-	.macro	busyuart,rd,rx
-	.endm
diff --git a/include/asm-arm/arch-msm/dma.h b/include/asm-arm/arch-msm/dma.h
deleted file mode 100644
index e4b565b..0000000
--- a/include/asm-arm/arch-msm/dma.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/* linux/include/asm-arm/arch-msm/dma.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_DMA_H
-
-#include <linux/list.h>
-#include <asm/arch/msm_iomap.h>
-
-struct msm_dmov_cmd {
-	struct list_head list;
-	unsigned int cmdptr;
-	void (*complete_func)(struct msm_dmov_cmd *cmd, unsigned int result);
-/*	void (*user_result_func)(struct msm_dmov_cmd *cmd); */
-};
-
-void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
-void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd);
-int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr);
-/* int msm_dmov_exec_cmd_etc(unsigned id, unsigned int cmdptr, int timeout, int interruptible); */
-
-
-
-#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
-#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2))
-#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2))
-#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2))
-
-/* only security domain 3 is available to the ARM11
- * SD0 -> mARM trusted, SD1 -> mARM nontrusted, SD2 -> aDSP, SD3 -> aARM
- */
-
-#define DMOV_CMD_PTR(ch)      DMOV_SD3(0x000, ch)
-#define DMOV_CMD_LIST         (0 << 29) /* does not work */
-#define DMOV_CMD_PTR_LIST     (1 << 29) /* works */
-#define DMOV_CMD_INPUT_CFG    (2 << 29) /* untested */
-#define DMOV_CMD_OUTPUT_CFG   (3 << 29) /* untested */
-#define DMOV_CMD_ADDR(addr)   ((addr) >> 3)
-
-#define DMOV_RSLT(ch)         DMOV_SD3(0x040, ch)
-#define DMOV_RSLT_VALID       (1 << 31) /* 0 == host has empties result fifo */
-#define DMOV_RSLT_ERROR       (1 << 3)
-#define DMOV_RSLT_FLUSH       (1 << 2)
-#define DMOV_RSLT_DONE        (1 << 1)  /* top pointer done */
-#define DMOV_RSLT_USER        (1 << 0)  /* command with FR force result */
-
-#define DMOV_FLUSH0(ch)       DMOV_SD3(0x080, ch)
-#define DMOV_FLUSH1(ch)       DMOV_SD3(0x0C0, ch)
-#define DMOV_FLUSH2(ch)       DMOV_SD3(0x100, ch)
-#define DMOV_FLUSH3(ch)       DMOV_SD3(0x140, ch)
-#define DMOV_FLUSH4(ch)       DMOV_SD3(0x180, ch)
-#define DMOV_FLUSH5(ch)       DMOV_SD3(0x1C0, ch)
-
-#define DMOV_STATUS(ch)       DMOV_SD3(0x200, ch)
-#define DMOV_STATUS_RSLT_COUNT(n)    (((n) >> 29))
-#define DMOV_STATUS_CMD_COUNT(n)     (((n) >> 27) & 3)
-#define DMOV_STATUS_RSLT_VALID       (1 << 1)
-#define DMOV_STATUS_CMD_PTR_RDY      (1 << 0)
-
-#define DMOV_ISR              DMOV_SD3(0x380, 0)
-
-#define DMOV_CONFIG(ch)       DMOV_SD3(0x300, ch)
-#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2)
-#define DMOV_CONFIG_FORCE_FLUSH_RSLT   (1 << 1)
-#define DMOV_CONFIG_IRQ_EN             (1 << 0)
-
-/* channel assignments */
-
-#define DMOV_NAND_CHAN        7
-#define DMOV_NAND_CRCI_CMD    5
-#define DMOV_NAND_CRCI_DATA   4
-
-#define DMOV_SDC1_CHAN        8
-#define DMOV_SDC1_CRCI        6
-
-#define DMOV_SDC2_CHAN        8
-#define DMOV_SDC2_CRCI        7
-
-#define DMOV_TSIF_CHAN        10
-#define DMOV_TSIF_CRCI        10
-
-#define DMOV_USB_CHAN         11
-
-/* no client rate control ifc (eg, ram) */
-#define DMOV_NONE_CRCI        0
-
-
-/* If the CMD_PTR register has CMD_PTR_LIST selected, the data mover
- * is going to walk a list of 32bit pointers as described below.  Each
- * pointer points to a *array* of dmov_s, etc structs.  The last pointer
- * in the list is marked with CMD_PTR_LP.  The last struct in each array
- * is marked with CMD_LC (see below).
- */
-#define CMD_PTR_ADDR(addr)  ((addr) >> 3)
-#define CMD_PTR_LP          (1 << 31) /* last pointer */
-#define CMD_PTR_PT          (3 << 29) /* ? */
-
-/* Single Item Mode */
-typedef struct {
-	unsigned cmd;
-	unsigned src;
-	unsigned dst;
-	unsigned len;
-} dmov_s;
-
-/* Scatter/Gather Mode */
-typedef struct {
-	unsigned cmd;
-	unsigned src_dscr;
-	unsigned dst_dscr;
-	unsigned _reserved;
-} dmov_sg;
-
-/* bits for the cmd field of the above structures */
-
-#define CMD_LC      (1 << 31)  /* last command */
-#define CMD_FR      (1 << 22)  /* force result -- does not work? */
-#define CMD_OCU     (1 << 21)  /* other channel unblock */
-#define CMD_OCB     (1 << 20)  /* other channel block */
-#define CMD_TCB     (1 << 19)  /* ? */
-#define CMD_DAH     (1 << 18)  /* destination address hold -- does not work?*/
-#define CMD_SAH     (1 << 17)  /* source address hold -- does not work? */
-
-#define CMD_MODE_SINGLE     (0 << 0) /* dmov_s structure used */
-#define CMD_MODE_SG         (1 << 0) /* untested */
-#define CMD_MODE_IND_SG     (2 << 0) /* untested */
-#define CMD_MODE_BOX        (3 << 0) /* untested */
-
-#define CMD_DST_SWAP_BYTES  (1 << 14) /* exchange each byte n with byte n+1 */
-#define CMD_DST_SWAP_SHORTS (1 << 15) /* exchange each short n with short n+1 */
-#define CMD_DST_SWAP_WORDS  (1 << 16) /* exchange each word n with word n+1 */
-
-#define CMD_SRC_SWAP_BYTES  (1 << 11) /* exchange each byte n with byte n+1 */
-#define CMD_SRC_SWAP_SHORTS (1 << 12) /* exchange each short n with short n+1 */
-#define CMD_SRC_SWAP_WORDS  (1 << 13) /* exchange each word n with word n+1 */
-
-#define CMD_DST_CRCI(n)     (((n) & 15) << 7)
-#define CMD_SRC_CRCI(n)     (((n) & 15) << 3)
-
-#endif
diff --git a/include/asm-arm/arch-msm/entry-macro.S b/include/asm-arm/arch-msm/entry-macro.S
deleted file mode 100644
index ee24aec..0000000
--- a/include/asm-arm/arch-msm/entry-macro.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* include/asm-arm/arch-msm7200/entry-macro.S
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <asm/arch/msm_iomap.h>
-
- 	.macro	disable_fiq
-	.endm
-
-	.macro	get_irqnr_preamble, base, tmp
-	@ enable imprecise aborts
-	cpsie	a
-	mov	\base, #MSM_VIC_BASE
-	.endm
-
-	.macro	arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ 0xD0 has irq# or old irq# if the irq has been handled
-	@ 0xD4 has irq# or -1 if none pending *but* if you just
-	@ read 0xD4 you never get the first irq for some reason
-	ldr	\irqnr, [\base, #0xD0]
-	ldr	\irqnr, [\base, #0xD4]
-	cmp	\irqnr, #0xffffffff
-	.endm
diff --git a/include/asm-arm/arch-msm/hardware.h b/include/asm-arm/arch-msm/hardware.h
deleted file mode 100644
index 89af2b7..0000000
--- a/include/asm-arm/arch-msm/hardware.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/include/asm-arm/arch-msm/hardware.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_HARDWARE_H
-
-#endif
diff --git a/include/asm-arm/arch-msm/io.h b/include/asm-arm/arch-msm/io.h
deleted file mode 100644
index 4645ae2..0000000
--- a/include/asm-arm/arch-msm/io.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* include/asm-arm/arch-msm/io.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __arch_ioremap __msm_ioremap
-#define __arch_iounmap __iounmap
-
-void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype);
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-#define __io(a)         __io(a)
-#define __mem_pci(a)    (a)
-
-#endif
diff --git a/include/asm-arm/arch-msm/irqs.h b/include/asm-arm/arch-msm/irqs.h
deleted file mode 100644
index e62a108..0000000
--- a/include/asm-arm/arch-msm/irqs.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/* linux/include/asm-arm/arch-msm/irqs.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_H
-#define __ASM_ARCH_MSM_IRQS_H
-
-/* MSM ARM11 Interrupt Numbers */
-/* See 80-VE113-1 A, pp219-221     */
-
-#define INT_A9_M2A_0         0
-#define INT_A9_M2A_1         1
-#define INT_A9_M2A_2         2
-#define INT_A9_M2A_3         3
-#define INT_A9_M2A_4         4
-#define INT_A9_M2A_5         5
-#define INT_A9_M2A_6         6
-#define INT_GP_TIMER_EXP     7
-#define INT_DEBUG_TIMER_EXP  8
-#define INT_UART1            9
-#define INT_UART2            10
-#define INT_UART3            11
-#define INT_UART1_RX         12
-#define INT_UART2_RX         13
-#define INT_UART3_RX         14
-#define INT_USB_OTG          15
-#define INT_MDDI_PRI         16
-#define INT_MDDI_EXT         17
-#define INT_MDDI_CLIENT      18
-#define INT_MDP              19
-#define INT_GRAPHICS         20
-#define INT_ADM_AARM         21
-#define INT_ADSP_A11         22
-#define INT_ADSP_A9_A11      23
-#define INT_SDC1_0           24
-#define INT_SDC1_1           25
-#define INT_SDC2_0           26
-#define INT_SDC2_1           27
-#define INT_KEYSENSE         28
-#define INT_TCHSCRN_SSBI     29
-#define INT_TCHSCRN1         30
-#define INT_TCHSCRN2         31
-
-#define INT_GPIO_GROUP1      (32 + 0)
-#define INT_GPIO_GROUP2      (32 + 1)
-#define INT_PWB_I2C          (32 + 2)
-#define INT_SOFTRESET        (32 + 3)
-#define INT_NAND_WR_ER_DONE  (32 + 4)
-#define INT_NAND_OP_DONE     (32 + 5)
-#define INT_PBUS_ARM11       (32 + 6)
-#define INT_AXI_MPU_SMI      (32 + 7)
-#define INT_AXI_MPU_EBI1     (32 + 8)
-#define INT_AD_HSSD          (32 + 9)
-#define INT_ARM11_PMU        (32 + 10)
-#define INT_ARM11_DMA        (32 + 11)
-#define INT_TSIF_IRQ         (32 + 12)
-#define INT_UART1DM_IRQ      (32 + 13)
-#define INT_UART1DM_RX       (32 + 14)
-#define INT_USB_HS           (32 + 15)
-#define INT_SDC3_0           (32 + 16)
-#define INT_SDC3_1           (32 + 17)
-#define INT_SDC4_0           (32 + 18)
-#define INT_SDC4_1           (32 + 19)
-#define INT_UART2DM_RX       (32 + 20)
-#define INT_UART2DM_IRQ      (32 + 21)
-
-/* 22-31 are reserved */
-
-#define MSM_IRQ_BIT(irq)     (1 << ((irq) & 31))
-
-#define NR_MSM_IRQS 64
-#define NR_GPIO_IRQS 122
-#define NR_BOARD_IRQS 64
-#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS)
-
-#define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n))
-
-#endif
diff --git a/include/asm-arm/arch-msm/memory.h b/include/asm-arm/arch-msm/memory.h
deleted file mode 100644
index b5ce0e9ac..0000000
--- a/include/asm-arm/arch-msm/memory.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/include/asm-arm/arch-msm/memory.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/* physical offset of RAM */
-#define PHYS_OFFSET		UL(0x10000000)
-
-/* bus address and physical addresses are identical */
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-#endif
-
diff --git a/include/asm-arm/arch-msm/msm_iomap.h b/include/asm-arm/arch-msm/msm_iomap.h
deleted file mode 100644
index b8955cc..0000000
--- a/include/asm-arm/arch-msm/msm_iomap.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/* linux/include/asm-arm/arch-msm/msm_iomap.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * The MSM peripherals are spread all over across 768MB of physical
- * space, which makes just having a simple IO_ADDRESS macro to slide
- * them into the right virtual location rough.  Instead, we will
- * provide a master phys->virt mapping for peripherals here.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IOMAP_H
-#define __ASM_ARCH_MSM_IOMAP_H
-
-#include <asm/sizes.h>
-
-/* Physical base address and size of peripherals.
- * Ordered by the virtual base addresses they will be mapped at.
- *
- * MSM_VIC_BASE must be an value that can be loaded via a "mov"
- * instruction, otherwise entry-macro.S will not compile.
- *
- * If you add or remove entries here, you'll want to edit the
- * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
- * changes.
- *
- */
-
-#define MSM_VIC_BASE          0xE0000000
-#define MSM_VIC_PHYS          0xC0000000
-#define MSM_VIC_SIZE          SZ_4K
-
-#define MSM_CSR_BASE          0xE0001000
-#define MSM_CSR_PHYS          0xC0100000
-#define MSM_CSR_SIZE          SZ_4K
-
-#define MSM_GPT_PHYS          MSM_CSR_PHYS
-#define MSM_GPT_BASE          MSM_CSR_BASE
-#define MSM_GPT_SIZE          SZ_4K
-
-#define MSM_DMOV_BASE         0xE0002000
-#define MSM_DMOV_PHYS         0xA9700000
-#define MSM_DMOV_SIZE         SZ_4K
-
-#define MSM_UART1_BASE        0xE0003000
-#define MSM_UART1_PHYS        0xA9A00000
-#define MSM_UART1_SIZE        SZ_4K
-
-#define MSM_UART2_BASE        0xE0004000
-#define MSM_UART2_PHYS        0xA9B00000
-#define MSM_UART2_SIZE        SZ_4K
-
-#define MSM_UART3_BASE        0xE0005000
-#define MSM_UART3_PHYS        0xA9C00000
-#define MSM_UART3_SIZE        SZ_4K
-
-#define MSM_I2C_BASE          0xE0006000
-#define MSM_I2C_PHYS          0xA9900000
-#define MSM_I2C_SIZE          SZ_4K
-
-#define MSM_GPIO1_BASE        0xE0007000
-#define MSM_GPIO1_PHYS        0xA9200000
-#define MSM_GPIO1_SIZE        SZ_4K
-
-#define MSM_GPIO2_BASE        0xE0008000
-#define MSM_GPIO2_PHYS        0xA9300000
-#define MSM_GPIO2_SIZE        SZ_4K
-
-#define MSM_HSUSB_BASE        0xE0009000
-#define MSM_HSUSB_PHYS        0xA0800000
-#define MSM_HSUSB_SIZE        SZ_4K
-
-#define MSM_CLK_CTL_BASE      0xE000A000
-#define MSM_CLK_CTL_PHYS      0xA8600000
-#define MSM_CLK_CTL_SIZE      SZ_4K
-
-#define MSM_PMDH_BASE         0xE000B000
-#define MSM_PMDH_PHYS         0xAA600000
-#define MSM_PMDH_SIZE         SZ_4K
-
-#define MSM_EMDH_BASE         0xE000C000
-#define MSM_EMDH_PHYS         0xAA700000
-#define MSM_EMDH_SIZE         SZ_4K
-
-#define MSM_MDP_BASE          0xE0010000
-#define MSM_MDP_PHYS          0xAA200000
-#define MSM_MDP_SIZE          0x000F0000
-
-#define MSM_SHARED_RAM_BASE   0xE0100000
-#define MSM_SHARED_RAM_PHYS   0x01F00000
-#define MSM_SHARED_RAM_SIZE   SZ_1M
-
-#endif
diff --git a/include/asm-arm/arch-msm/system.h b/include/asm-arm/arch-msm/system.h
deleted file mode 100644
index fb31b3a..0000000
--- a/include/asm-arm/arch-msm/system.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/include/asm-arm/arch-msm/system.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <asm/arch/hardware.h>
-
-void arch_idle(void);
-
-static inline void arch_reset(char mode)
-{
-	for (;;) ;  /* depends on IPC w/ other core */
-}
diff --git a/include/asm-arm/arch-msm/timex.h b/include/asm-arm/arch-msm/timex.h
deleted file mode 100644
index 8724487..0000000
--- a/include/asm-arm/arch-msm/timex.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/include/asm-arm/arch-msm/timex.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_TIMEX_H
-#define __ASM_ARCH_MSM_TIMEX_H
-
-#define CLOCK_TICK_RATE		1000000
-
-#endif
diff --git a/include/asm-arm/arch-msm/uncompress.h b/include/asm-arm/arch-msm/uncompress.h
deleted file mode 100644
index e91ed78..0000000
--- a/include/asm-arm/arch-msm/uncompress.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/include/asm-arm/arch-msm/uncompress.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
-
-#include "hardware.h"
-
-static void putc(int c)
-{
-}
-
-static inline void flush(void)
-{
-}
-
-static inline void arch_decomp_setup(void)
-{
-}
-
-static inline void arch_decomp_wdog(void)
-{
-}
-
-#endif
diff --git a/include/asm-arm/arch-msm/vmalloc.h b/include/asm-arm/arch-msm/vmalloc.h
deleted file mode 100644
index 60f8d91..0000000
--- a/include/asm-arm/arch-msm/vmalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/include/asm-arm/arch-msm/vmalloc.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_VMALLOC_H
-#define __ASM_ARCH_MSM_VMALLOC_H
-
-#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
-
-#endif
-
diff --git a/include/asm-arm/arch-mv78xx0/debug-macro.S b/include/asm-arm/arch-mv78xx0/debug-macro.S
deleted file mode 100644
index d0595bd..0000000
--- a/include/asm-arm/arch-mv78xx0/debug-macro.S
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/mv78xx0.h>
-
-	.macro	addruart,rx
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =MV78XX0_REGS_PHYS_BASE
-	ldrne	\rx, =MV78XX0_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-mv78xx0/dma.h b/include/asm-arm/arch-mv78xx0/dma.h
deleted file mode 100644
index 40a8c178..0000000
--- a/include/asm-arm/arch-mv78xx0/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/include/asm-arm/arch-mv78xx0/entry-macro.S b/include/asm-arm/arch-mv78xx0/entry-macro.S
deleted file mode 100644
index e9a606b..0000000
--- a/include/asm-arm/arch-mv78xx0/entry-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell MV78xx0 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/arch/mv78xx0.h>
-
-	.macro  disable_fiq
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IRQ_VIRT_BASE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ check low interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
-	mov	\irqnr, #31
-	ands	\irqstat, \irqstat, \tmp
-
-	@ if no low interrupts set, check high interrupts
-	ldreq	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
-	ldreq	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
-	moveq	\irqnr, #63
-	andeqs	\irqstat, \irqstat, \tmp
-
-	@ find first active interrupt source
-	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm
diff --git a/include/asm-arm/arch-mv78xx0/hardware.h b/include/asm-arm/arch-mv78xx0/hardware.h
deleted file mode 100644
index 8e179260..0000000
--- a/include/asm-arm/arch-mv78xx0/hardware.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/hardware.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "mv78xx0.h"
-
-#define pcibios_assign_all_busses()	1
-
-#define PCIBIOS_MIN_IO			0x00001000
-#define PCIBIOS_MIN_MEM			0x01000000
-#define PCIMEM_BASE			MV78XX0_PCIE_MEM_PHYS_BASE /* mem base for VGA */
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/io.h b/include/asm-arm/arch-mv78xx0/io.h
deleted file mode 100644
index 415d4c9..0000000
--- a/include/asm-arm/arch-mv78xx0/io.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "mv78xx0.h"
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0))
-					+ MV78XX0_PCIE_IO_VIRT_BASE(0));
-}
-
-#define __io(a)			__io(a)
-#define __mem_pci(a)		(a)
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/irqs.h b/include/asm-arm/arch-mv78xx0/irqs.h
deleted file mode 100644
index 7593045..0000000
--- a/include/asm-arm/arch-mv78xx0/irqs.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/irqs.h
- *
- * IRQ definitions for Marvell MV78xx0 SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include "mv78xx0.h"	/* need GPIO_MAX */
-
-/*
- * MV78xx0 Low Interrupt Controller
- */
-#define IRQ_MV78XX0_ERR		0
-#define IRQ_MV78XX0_SPI		1
-#define IRQ_MV78XX0_I2C_0	2
-#define IRQ_MV78XX0_I2C_1	3
-#define IRQ_MV78XX0_IDMA_0	4
-#define IRQ_MV78XX0_IDMA_1	5
-#define IRQ_MV78XX0_IDMA_2	6
-#define IRQ_MV78XX0_IDMA_3	7
-#define IRQ_MV78XX0_TIMER_0	8
-#define IRQ_MV78XX0_TIMER_1	9
-#define IRQ_MV78XX0_TIMER_2	10
-#define IRQ_MV78XX0_TIMER_3	11
-#define IRQ_MV78XX0_UART_0	12
-#define IRQ_MV78XX0_UART_1	13
-#define IRQ_MV78XX0_UART_2	14
-#define IRQ_MV78XX0_UART_3	15
-#define IRQ_MV78XX0_USB_0	16
-#define IRQ_MV78XX0_USB_1	17
-#define IRQ_MV78XX0_USB_2	18
-#define IRQ_MV78XX0_CRYPTO	19
-#define IRQ_MV78XX0_SDIO_0	20
-#define IRQ_MV78XX0_SDIO_1	21
-#define IRQ_MV78XX0_XOR_0	22
-#define IRQ_MV78XX0_XOR_1	23
-#define IRQ_MV78XX0_I2S_0	24
-#define IRQ_MV78XX0_I2S_1	25
-#define IRQ_MV78XX0_SATA	26
-#define IRQ_MV78XX0_TDMI	27
-
-/*
- * MV78xx0 High Interrupt Controller
- */
-#define IRQ_MV78XX0_PCIE_00	32
-#define IRQ_MV78XX0_PCIE_01	33
-#define IRQ_MV78XX0_PCIE_02	34
-#define IRQ_MV78XX0_PCIE_03	35
-#define IRQ_MV78XX0_PCIE_10	36
-#define IRQ_MV78XX0_PCIE_11	37
-#define IRQ_MV78XX0_PCIE_12	38
-#define IRQ_MV78XX0_PCIE_13	39
-#define IRQ_MV78XX0_GE00_SUM	40
-#define IRQ_MV78XX0_GE00_RX	41
-#define IRQ_MV78XX0_GE00_TX	42
-#define IRQ_MV78XX0_GE00_MISC	43
-#define IRQ_MV78XX0_GE01_SUM	44
-#define IRQ_MV78XX0_GE01_RX	45
-#define IRQ_MV78XX0_GE01_TX	46
-#define IRQ_MV78XX0_GE01_MISC	47
-#define IRQ_MV78XX0_GE10_SUM	48
-#define IRQ_MV78XX0_GE10_RX	49
-#define IRQ_MV78XX0_GE10_TX	50
-#define IRQ_MV78XX0_GE10_MISC	51
-#define IRQ_MV78XX0_GE11_SUM	52
-#define IRQ_MV78XX0_GE11_RX	53
-#define IRQ_MV78XX0_GE11_TX	54
-#define IRQ_MV78XX0_GE11_MISC	55
-#define IRQ_MV78XX0_GPIO_0_7	56
-#define IRQ_MV78XX0_GPIO_8_15	57
-#define IRQ_MV78XX0_GPIO_16_23	58
-#define IRQ_MV78XX0_GPIO_24_31	59
-#define IRQ_MV78XX0_DB_IN	60
-#define IRQ_MV78XX0_DB_OUT	61
-
-/*
- * MV78XX0 General Purpose Pins
- */
-#define IRQ_MV78XX0_GPIO_START	64
-#define NR_GPIO_IRQS		GPIO_MAX
-
-#define NR_IRQS			(IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/memory.h b/include/asm-arm/arch-mv78xx0/memory.h
deleted file mode 100644
index 721a6b1..0000000
--- a/include/asm-arm/arch-mv78xx0/memory.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET		UL(0x00000000)
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/mv78xx0.h b/include/asm-arm/arch-mv78xx0/mv78xx0.h
deleted file mode 100644
index 9f5d83c..0000000
--- a/include/asm-arm/arch-mv78xx0/mv78xx0.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/mv78xx0.h
- *
- * Generic definitions for Marvell MV78xx0 SoC flavors:
- *  MV781x0 and MV782x0.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_MV78XX0_H
-#define __ASM_ARCH_MV78XX0_H
-
-/*
- * Marvell MV78xx0 address maps.
- *
- * phys
- * c0000000	PCIe Memory space
- * f0800000	PCIe #0 I/O space
- * f0900000	PCIe #1 I/O space
- * f0a00000	PCIe #2 I/O space
- * f0b00000	PCIe #3 I/O space
- * f0c00000	PCIe #4 I/O space
- * f0d00000	PCIe #5 I/O space
- * f0e00000	PCIe #6 I/O space
- * f0f00000	PCIe #7 I/O space
- * f1000000	on-chip peripheral registers
- *
- * virt		phys		size
- * fe400000	f102x000	16K	core-specific peripheral registers
- * fe700000	f0800000	1M	PCIe #0 I/O space
- * fe800000	f0900000	1M	PCIe #1 I/O space
- * fe900000	f0a00000	1M	PCIe #2 I/O space
- * fea00000	f0b00000	1M	PCIe #3 I/O space
- * feb00000	f0c00000	1M	PCIe #4 I/O space
- * fec00000	f0d00000	1M	PCIe #5 I/O space
- * fed00000	f0e00000	1M	PCIe #6 I/O space
- * fee00000	f0f00000	1M	PCIe #7 I/O space
- * fef00000	f1000000	1M	on-chip peripheral registers
- */
-#define MV78XX0_CORE0_REGS_PHYS_BASE	0xf1020000
-#define MV78XX0_CORE1_REGS_PHYS_BASE	0xf1024000
-#define MV78XX0_CORE_REGS_VIRT_BASE	0xfe400000
-#define MV78XX0_CORE_REGS_SIZE		SZ_16K
-
-#define MV78XX0_PCIE_IO_PHYS_BASE(i)	(0xf0800000 + ((i) << 20))
-#define MV78XX0_PCIE_IO_VIRT_BASE(i)	(0xfe700000 + ((i) << 20))
-#define MV78XX0_PCIE_IO_SIZE		SZ_1M
-
-#define MV78XX0_REGS_PHYS_BASE		0xf1000000
-#define MV78XX0_REGS_VIRT_BASE		0xfef00000
-#define MV78XX0_REGS_SIZE		SZ_1M
-
-#define MV78XX0_PCIE_MEM_PHYS_BASE	0xc0000000
-#define MV78XX0_PCIE_MEM_SIZE		0x30000000
-
-/*
- * Core-specific peripheral registers.
- */
-#define BRIDGE_VIRT_BASE	(MV78XX0_CORE_REGS_VIRT_BASE)
-#define  CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
-#define   L2_WRITETHROUGH	0x00020000
-#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-#define   SOFT_RESET_OUT_EN	0x00000004
-#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-#define   SOFT_RESET		0x00000001
-#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-#define   BRIDGE_INT_TIMER0	0x0002
-#define   BRIDGE_INT_TIMER1	0x0004
-#define   BRIDGE_INT_TIMER1_CLR	(~0x0004)
-#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-#define   IRQ_CAUSE_LOW_OFF	0x0004
-#define   IRQ_CAUSE_HIGH_OFF	0x0008
-#define   IRQ_MASK_LOW_OFF	0x0010
-#define   IRQ_MASK_HIGH_OFF	0x0014
-#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
-
-/*
- * Register Map
- */
-#define DDR_VIRT_BASE		(MV78XX0_REGS_VIRT_BASE | 0x00000)
-#define  DDR_WINDOW_CPU0_BASE	(DDR_VIRT_BASE | 0x1500)
-#define  DDR_WINDOW_CPU1_BASE	(DDR_VIRT_BASE | 0x1700)
-
-#define DEV_BUS_PHYS_BASE	(MV78XX0_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x10000)
-#define  SAMPLE_AT_RESET_LOW	(DEV_BUS_VIRT_BASE | 0x0030)
-#define  SAMPLE_AT_RESET_HIGH	(DEV_BUS_VIRT_BASE | 0x0034)
-#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
-#define  UART2_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2200)
-#define  UART2_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2200)
-#define  UART3_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2300)
-#define  UART3_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2300)
-
-#define GE10_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x30000)
-#define GE11_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x34000)
-
-#define PCIE00_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x40000)
-#define PCIE01_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x44000)
-#define PCIE02_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x48000)
-#define PCIE03_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x4c000)
-
-#define USB0_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x50000)
-#define USB1_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x51000)
-#define USB2_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x52000)
-
-#define GE00_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x70000)
-#define GE01_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x74000)
-
-#define PCIE10_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x80000)
-#define PCIE11_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x84000)
-#define PCIE12_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x88000)
-#define PCIE13_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x8c000)
-
-#define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0xa0000)
-
-
-#define GPIO_MAX		32
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/system.h b/include/asm-arm/arch-mv78xx0/system.h
deleted file mode 100644
index 7eb47d3..0000000
--- a/include/asm-arm/arch-mv78xx0/system.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/mv78xx0.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	/*
-	 * Enable soft reset to assert RSTOUTn.
-	 */
-	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
-	/*
-	 * Assert soft reset.
-	 */
-	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
-	while (1)
-		;
-}
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/timex.h b/include/asm-arm/arch-mv78xx0/timex.h
deleted file mode 100644
index a854b1cc..0000000
--- a/include/asm-arm/arch-mv78xx0/timex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/include/asm-arm/arch-mv78xx0/uncompress.h b/include/asm-arm/arch-mv78xx0/uncompress.h
deleted file mode 100644
index 3bfe0a2..0000000
--- a/include/asm-arm/arch-mv78xx0/uncompress.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/arch/mv78xx0.h>
-
-#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
-	unsigned char *base = SERIAL_BASE;
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		if (base[UART_LSR << 2] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
-	unsigned char *base = SERIAL_BASE;
-	unsigned char mask;
-	int i;
-
-	mask = UART_LSR_TEMT | UART_LSR_THRE;
-
-	for (i = 0; i < 0x1000; i++) {
-		if ((base[UART_LSR << 2] & mask) == mask)
-			break;
-		barrier();
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-mv78xx0/vmalloc.h b/include/asm-arm/arch-mv78xx0/vmalloc.h
deleted file mode 100644
index f2c5121..0000000
--- a/include/asm-arm/arch-mv78xx0/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe000000
diff --git a/include/asm-arm/arch-mxc/debug-macro.S b/include/asm-arm/arch-mxc/debug-macro.S
deleted file mode 100644
index 575087f..0000000
--- a/include/asm-arm/arch-mxc/debug-macro.S
+++ /dev/null
@@ -1,49 +0,0 @@
-/* linux/include/asm-arm/arch-imx/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <asm/arch/hardware.h>
-
-#ifdef CONFIG_MACH_MX31ADS
-#include <asm/arch/board-mx31ads.h>
-#endif
-#ifdef CONFIG_MACH_PCM037
-#include <asm/arch/board-pcm037.h>
-#endif
-#ifdef CONFIG_MACH_MX31LITE
-#include <asm/arch/board-mx31lite.h>
-#endif
-#ifdef CONFIG_MACH_MX27ADS
-#include <asm/arch/board-mx27ads.h>
-#endif
-#ifdef CONFIG_MACH_PCM038
-#include <asm/arch/board-pcm038.h>
-#endif
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =MXC_LL_UART_PADDR	@ physical
-		ldrne	\rx, =MXC_LL_UART_VADDR	@ virtual
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x40]	@ TXDATA
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #0x98]	@ SR2
-		tst	\rd, #1 << 3		@ TXDC
-		beq	1002b			@ wait until transmit done
-		.endm
diff --git a/include/asm-arm/arch-mxc/gpio.h b/include/asm-arm/arch-mxc/gpio.h
deleted file mode 100644
index 5f13a65..0000000
--- a/include/asm-arm/arch-mxc/gpio.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_GPIO_H__
-#define __ASM_ARCH_MXC_GPIO_H__
-
-#include <asm/arch/hardware.h>
-#include <asm-generic/gpio.h>
-
-/* use gpiolib dispatchers */
-#define gpio_get_value		__gpio_get_value
-#define gpio_set_value		__gpio_set_value
-#define gpio_cansleep		__gpio_cansleep
-
-#define gpio_to_irq(gpio)	(MXC_MAX_INT_LINES + (gpio))
-#define irq_to_gpio(irq)	((irq) - MXC_MAX_INT_LINES)
-
-struct mxc_gpio_port {
-	void __iomem *base;
-	int irq;
-	int virtual_irq_start;
-	struct gpio_chip chip;
-};
-
-int mxc_gpio_init(struct mxc_gpio_port*, int);
-
-#endif
diff --git a/include/asm-arm/arch-mxc/hardware.h b/include/asm-arm/arch-mxc/hardware.h
deleted file mode 100644
index 37cddba..0000000
--- a/include/asm-arm/arch-mxc/hardware.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#define __ASM_ARCH_MXC_HARDWARE_H__
-
-#include <asm/sizes.h>
-
-#ifdef CONFIG_ARCH_MX3
-# include <asm/arch/mx31.h>
-#endif
-
-#ifdef CONFIG_ARCH_MX2
-# ifdef CONFIG_MACH_MX27
-#  include <asm/arch/mx27.h>
-# endif
-#endif
-
-#include <asm/arch/mxc.h>
-
-#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/include/asm-arm/arch-mxc/irqs.h b/include/asm-arm/arch-mxc/irqs.h
deleted file mode 100644
index 21411ef..0000000
--- a/include/asm-arm/arch-mxc/irqs.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_IRQS_H__
-#define __ASM_ARCH_MXC_IRQS_H__
-
-#include <asm/arch/hardware.h>
-
-#endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/include/asm-arm/arch-mxc/memory.h b/include/asm-arm/arch-mxc/memory.h
deleted file mode 100644
index 7e669ee..0000000
--- a/include/asm-arm/arch-mxc/memory.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_MEMORY_H__
-#define __ASM_ARCH_MXC_MEMORY_H__
-
-#include <asm/arch/hardware.h>
-
-/*
- * Virtual view <-> DMA view memory address translations
- * This macro is used to translate the virtual address to an address
- * suitable to be passed to set_dma_addr()
- */
-#define __virt_to_bus(a)	__virt_to_phys(a)
-
-/*
- * Used to convert an address for DMA operations to an address that the
- * kernel can use.
- */
-#define __bus_to_virt(a)	__phys_to_virt(a)
-
-#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/include/asm-arm/arch-mxc/mxc_timer.h b/include/asm-arm/arch-mxc/mxc_timer.h
deleted file mode 100644
index 5439fa6..0000000
--- a/include/asm-arm/arch-mxc/mxc_timer.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * mxc_timer.h
- *
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#ifndef __PLAT_MXC_TIMER_H
-#define __PLAT_MXC_TIMER_H
-
-#include <linux/clk.h>
-#include <asm/arch/hardware.h>
-
-#ifdef CONFIG_ARCH_IMX
-#define TIMER_BASE		IO_ADDRESS(TIM1_BASE_ADDR)
-#define TIMER_INTERRUPT		TIM1_INT
-
-#define TCTL_VAL		TCTL_CLK_PCLK1
-#define TCTL_IRQEN		(1<<4)
-#define TCTL_FRR		(1<<8)
-#define TCTL_CLK_PCLK1		(1<<1)
-#define TCTL_CLK_PCLK1_4	(2<<1)
-#define TCTL_CLK_TIN		(3<<1)
-#define TCTL_CLK_32		(4<<1)
-
-#define MXC_TCTL   0x00
-#define MXC_TPRER  0x04
-#define MXC_TCMP   0x08
-#define MXC_TCR    0x0c
-#define MXC_TCN    0x10
-#define MXC_TSTAT  0x14
-#define TSTAT_CAPT		(1<<1)
-#define TSTAT_COMP		(1<<0)
-
-static inline void gpt_irq_disable(void)
-{
-	unsigned int tmp;
-
-	tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
-	__raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
-	__raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
-				TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
-	__raw_writel(0, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_IMX */
-
-#ifdef CONFIG_ARCH_MX2
-#define TIMER_BASE		IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT		MXC_INT_GPT1
-
-#define MXC_TCTL   0x00
-#define TCTL_VAL		TCTL_CLK_PCLK1
-#define TCTL_CLK_PCLK1		(1<<1)
-#define TCTL_CLK_PCLK1_4	(2<<1)
-#define TCTL_IRQEN		(1<<4)
-#define TCTL_FRR		(1<<8)
-#define MXC_TPRER  0x04
-#define MXC_TCMP   0x08
-#define MXC_TCR    0x0c
-#define MXC_TCN    0x10
-#define MXC_TSTAT  0x14
-#define TSTAT_CAPT		(1<<1)
-#define TSTAT_COMP		(1<<0)
-
-static inline void gpt_irq_disable(void)
-{
-	unsigned int tmp;
-
-	tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
-	__raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
-	__raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
-				TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
-	__raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX2 */
-
-#ifdef CONFIG_ARCH_MX3
-#define TIMER_BASE		IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT		MXC_INT_GPT
-
-#define MXC_TCTL   0x00
-#define TCTL_VAL		(TCTL_CLK_IPG | TCTL_WAITEN)
-#define TCTL_CLK_IPG		(1<<6)
-#define TCTL_FRR		(1<<9)
-#define TCTL_WAITEN		(1<<3)
-
-#define MXC_TPRER  0x04
-#define MXC_TSTAT  0x08
-#define TSTAT_OF1		(1<<0)
-#define TSTAT_OF2		(1<<1)
-#define TSTAT_OF3		(1<<2)
-#define TSTAT_IF1		(1<<3)
-#define TSTAT_IF2		(1<<4)
-#define TSTAT_ROV		(1<<5)
-#define MXC_IR     0x0c
-#define MXC_TCMP   0x10
-#define MXC_TCMP2  0x14
-#define MXC_TCMP3  0x18
-#define MXC_TCR    0x1c
-#define MXC_TCN    0x24
-
-static inline void gpt_irq_disable(void)
-{
-	__raw_writel(0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_enable(void)
-{
-	__raw_writel(1<<0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_acknowledge(void)
-{
-	__raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX3 */
-
-#define TCTL_SWR		(1<<15)
-#define TCTL_CC			(1<<10)
-#define TCTL_OM			(1<<9)
-#define TCTL_CAP_RIS		(1<<6)
-#define TCTL_CAP_FAL		(2<<6)
-#define TCTL_CAP_RIS_FAL	(3<<6)
-#define TCTL_CAP_ENA		(1<<5)
-#define TCTL_TEN		(1<<0)
-
-#endif
diff --git a/include/asm-arm/arch-mxc/timex.h b/include/asm-arm/arch-mxc/timex.h
deleted file mode 100644
index 432e0c8..0000000
--- a/include/asm-arm/arch-mxc/timex.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *  Copyright (C) 1999 ARM Limited
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MXC_TIMEX_H__
-#define __ASM_ARCH_MXC_TIMEX_H__
-
-#include <asm/arch/hardware.h>	/* for CLOCK_TICK_RATE */
-
-#endif				/* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/include/asm-arm/arch-mxc/uncompress.h b/include/asm-arm/arch-mxc/uncompress.h
deleted file mode 100644
index 18f33b0..0000000
--- a/include/asm-arm/arch-mxc/uncompress.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- *  include/asm-arm/arch-mxc/uncompress.h
- *
- *
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__
-#define __ASM_ARCH_MXC_UNCOMPRESS_H__
-
-#define __MXC_BOOT_UNCOMPRESS
-
-#include <asm/arch/hardware.h>
-
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
-
-#define USR2 0x98
-#define USR2_TXFE (1<<14)
-#define TXR  0x40
-#define UCR1 0x80
-#define UCR1_UARTEN 1
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-
-static void putc(int ch)
-{
-	static unsigned long serial_port = 0;
-
-	if (unlikely(serial_port == 0)) {
-		do {
-			serial_port = UART1_BASE_ADDR;
-			if (UART(UCR1) & UCR1_UARTEN)
-				break;
-			serial_port = UART2_BASE_ADDR;
-			if (UART(UCR1) & UCR1_UARTEN)
-				break;
-			return;
-		} while (0);
-	}
-
-	while (!(UART(USR2) & USR2_TXFE))
-		barrier();
-
-	UART(TXR) = ch;
-}
-
-#define flush() do { } while (0)
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
-
-#endif				/* __ASM_ARCH_MXC_UNCOMPRESS_H__ */
diff --git a/include/asm-arm/arch-netx/debug-macro.S b/include/asm-arm/arch-netx/debug-macro.S
deleted file mode 100644
index a940d0e..0000000
--- a/include/asm-arm/arch-netx/debug-macro.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* linux/include/asm-arm/arch-netx/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include "hardware.h"
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x00100000		@ physical
-		movne	\rx, #io_p2v(0x00100000)	@ virtual
-		orr	\rx, \rx, #0x00000a00
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0]
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #0x18]
-		tst	\rd, #(1 << 3)
-		bne	1002b
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #0x18]
-		tst	\rd, #(1 << 3)
-		bne	1001b
-		.endm
diff --git a/include/asm-arm/arch-netx/dma.h b/include/asm-arm/arch-netx/dma.h
deleted file mode 100644
index 4eda5fe..0000000
--- a/include/asm-arm/arch-netx/dma.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-netx/dma.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define MAX_DMA_CHANNELS 0
-#define MAX_DMA_ADDRESS ~0
diff --git a/include/asm-arm/arch-netx/entry-macro.S b/include/asm-arm/arch-netx/entry-macro.S
deleted file mode 100644
index 4115bbd..0000000
--- a/include/asm-arm/arch-netx/entry-macro.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * include/asm-arm/arch-netx/entry-macro.S
- *
- * Low-level IRQ helper macros for Hilscher netX based platforms
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <asm/arch/hardware.h>
-
-		.macro  disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	\base, #io_p2v(0x00100000)
-		add	\base, \base, #0x000ff000
-
-		ldr	\irqstat, [\base, #0]
-		clz	\irqnr, \irqstat
-		rsb     \irqnr, \irqnr, #31
-		cmp	\irqstat, #0
-		.endm
-
diff --git a/include/asm-arm/arch-netx/eth.h b/include/asm-arm/arch-netx/eth.h
deleted file mode 100644
index 643c90e..0000000
--- a/include/asm-arm/arch-netx/eth.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * include/asm-arm/arch-netx/eth.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef ASMARM_ARCH_ETH_H
-#define ASMARM_ARCH_ETH_H
-
-struct netxeth_platform_data {
-	unsigned int xcno;	/* number of xmac/xpec engine this eth uses */
-};
-
-#endif
diff --git a/include/asm-arm/arch-netx/hardware.h b/include/asm-arm/arch-netx/hardware.h
deleted file mode 100644
index 7786c45..0000000
--- a/include/asm-arm/arch-netx/hardware.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-netx/hardware.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define NETX_IO_PHYS	0x00100000
-#define NETX_IO_VIRT	0xe0000000
-#define NETX_IO_SIZE	0x00100000
-
-#define SRAM_INTERNAL_PHYS_0 0x00000
-#define SRAM_INTERNAL_PHYS_1 0x08000
-#define SRAM_INTERNAL_PHYS_2 0x10000
-#define SRAM_INTERNAL_PHYS_3 0x18000
-#define SRAM_INTERNAL_PHYS(no) ((no) * 0x8000)
-
-#define XPEC_MEM_SIZE 0x4000
-#define XMAC_MEM_SIZE 0x1000
-#define SRAM_MEM_SIZE 0x8000
-
-#define io_p2v(x) ((x) - NETX_IO_PHYS + NETX_IO_VIRT)
-#define io_v2p(x) ((x) - NETX_IO_VIRT + NETX_IO_PHYS)
-
-#endif
diff --git a/include/asm-arm/arch-netx/io.h b/include/asm-arm/arch-netx/io.h
deleted file mode 100644
index a7a53f8..0000000
--- a/include/asm-arm/arch-netx/io.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-netx/io.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)         ((void __iomem *)(a))
-#define __mem_pci(a)            (a)
-
-#endif
diff --git a/include/asm-arm/arch-netx/irqs.h b/include/asm-arm/arch-netx/irqs.h
deleted file mode 100644
index a487dc6..0000000
--- a/include/asm-arm/arch-netx/irqs.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * include/asm-arm/arch-netx/irqs.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define NETX_IRQ_VIC_START   0
-#define NETX_IRQ_SOFTINT     0
-#define NETX_IRQ_TIMER0      1
-#define NETX_IRQ_TIMER1      2
-#define NETX_IRQ_TIMER2      3
-#define NETX_IRQ_SYSTIME_NS  4
-#define NETX_IRQ_SYSTIME_S   5
-#define NETX_IRQ_GPIO_15     6
-#define NETX_IRQ_WATCHDOG    7
-#define NETX_IRQ_UART0       8
-#define NETX_IRQ_UART1       9
-#define NETX_IRQ_UART2      10
-#define NETX_IRQ_USB        11
-#define NETX_IRQ_SPI        12
-#define NETX_IRQ_I2C        13
-#define NETX_IRQ_LCD        14
-#define NETX_IRQ_HIF        15
-#define NETX_IRQ_GPIO_0_14  16
-#define NETX_IRQ_XPEC0      17
-#define NETX_IRQ_XPEC1      18
-#define NETX_IRQ_XPEC2      19
-#define NETX_IRQ_XPEC3      20
-#define NETX_IRQ_XPEC(no)   (17 + (no))
-#define NETX_IRQ_MSYNC0     21
-#define NETX_IRQ_MSYNC1     22
-#define NETX_IRQ_MSYNC2     23
-#define NETX_IRQ_MSYNC3     24
-#define NETX_IRQ_IRQ_PHY    25
-#define NETX_IRQ_ISO_AREA   26
-/* int 27 is reserved */
-/* int 28 is reserved */
-#define NETX_IRQ_TIMER3     29
-#define NETX_IRQ_TIMER4     30
-/* int 31 is reserved */
-
-#define NETX_IRQS 32
-
-/* for multiplexed irqs on gpio 0..14 */
-#define NETX_IRQ_GPIO(x) (NETX_IRQS + (x))
-#define NETX_IRQ_GPIO_LAST NETX_IRQ_GPIO(14)
-
-/* Host interface interrupts */
-#define NETX_IRQ_HIF_CHAINED(x)    (NETX_IRQ_GPIO_LAST + 1 + (x))
-#define NETX_IRQ_HIF_PIO35         NETX_IRQ_HIF_CHAINED(0)
-#define NETX_IRQ_HIF_PIO36         NETX_IRQ_HIF_CHAINED(1)
-#define NETX_IRQ_HIF_PIO40         NETX_IRQ_HIF_CHAINED(2)
-#define NETX_IRQ_HIF_PIO47         NETX_IRQ_HIF_CHAINED(3)
-#define NETX_IRQ_HIF_PIO72         NETX_IRQ_HIF_CHAINED(4)
-#define NETX_IRQ_HIF_LAST          NETX_IRQ_HIF_CHAINED(4)
-
-#define NR_IRQS (NETX_IRQ_HIF_LAST + 1)
diff --git a/include/asm-arm/arch-netx/memory.h b/include/asm-arm/arch-netx/memory.h
deleted file mode 100644
index 6d8d2df..0000000
--- a/include/asm-arm/arch-netx/memory.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-netx/memory.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET UL(0x80000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x)         __virt_to_phys(x)
-#define __bus_to_virt(x)         __phys_to_virt(x)
-
-#endif
-
diff --git a/include/asm-arm/arch-netx/netx-regs.h b/include/asm-arm/arch-netx/netx-regs.h
deleted file mode 100644
index fc9aa21..0000000
--- a/include/asm-arm/arch-netx/netx-regs.h
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- * include/asm-arm/arch-netx/netx-regs.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_NETX_REGS_H
-#define __ASM_ARCH_NETX_REGS_H
-
-/* offsets relative to the beginning of the io space */
-#define NETX_OFS_SYSTEM  0x00000
-#define NETX_OFS_MEMCR   0x00100
-#define NETX_OFS_DPMAS   0x03000
-#define NETX_OFS_GPIO    0x00800
-#define NETX_OFS_PIO     0x00900
-#define NETX_OFS_UART0   0x00a00
-#define NETX_OFS_UART1   0x00a40
-#define NETX_OFS_UART2   0x00a80
-#define NETX_OF_MIIMU    0x00b00
-#define NETX_OFS_SPI     0x00c00
-#define NETX_OFS_I2C     0x00d00
-#define NETX_OFS_SYSTIME 0x01100
-#define NETX_OFS_RTC     0x01200
-#define NETX_OFS_EXTBUS  0x03600
-#define NETX_OFS_LCD     0x04000
-#define NETX_OFS_USB     0x20000
-#define NETX_OFS_XMAC0   0x60000
-#define NETX_OFS_XMAC1   0x61000
-#define NETX_OFS_XMAC2   0x62000
-#define NETX_OFS_XMAC3   0x63000
-#define NETX_OFS_XMAC(no) (0x60000 + (no) * 0x1000)
-#define NETX_OFS_PFIFO   0x64000
-#define NETX_OFS_XPEC0   0x70000
-#define NETX_OFS_XPEC1   0x74000
-#define NETX_OFS_XPEC2   0x78000
-#define NETX_OFS_XPEC3   0x7c000
-#define NETX_OFS_XPEC(no) (0x70000 + (no) * 0x4000)
-#define NETX_OFS_VIC     0xff000
-
-/* physical addresses */
-#define NETX_PA_SYSTEM   (NETX_IO_PHYS + NETX_OFS_SYSTEM)
-#define NETX_PA_MEMCR    (NETX_IO_PHYS + NETX_OFS_MEMCR)
-#define NETX_PA_DPMAS    (NETX_IO_PHYS + NETX_OFS_DPMAS)
-#define NETX_PA_GPIO     (NETX_IO_PHYS + NETX_OFS_GPIO)
-#define NETX_PA_PIO      (NETX_IO_PHYS + NETX_OFS_PIO)
-#define NETX_PA_UART0    (NETX_IO_PHYS + NETX_OFS_UART0)
-#define NETX_PA_UART1    (NETX_IO_PHYS + NETX_OFS_UART1)
-#define NETX_PA_UART2    (NETX_IO_PHYS + NETX_OFS_UART2)
-#define NETX_PA_MIIMU    (NETX_IO_PHYS + NETX_OF_MIIMU)
-#define NETX_PA_SPI      (NETX_IO_PHYS + NETX_OFS_SPI)
-#define NETX_PA_I2C      (NETX_IO_PHYS + NETX_OFS_I2C)
-#define NETX_PA_SYSTIME  (NETX_IO_PHYS + NETX_OFS_SYSTIME)
-#define NETX_PA_RTC      (NETX_IO_PHYS + NETX_OFS_RTC)
-#define NETX_PA_EXTBUS   (NETX_IO_PHYS + NETX_OFS_EXTBUS)
-#define NETX_PA_LCD      (NETX_IO_PHYS + NETX_OFS_LCD)
-#define NETX_PA_USB      (NETX_IO_PHYS + NETX_OFS_USB)
-#define NETX_PA_XMAC0    (NETX_IO_PHYS + NETX_OFS_XMAC0)
-#define NETX_PA_XMAC1    (NETX_IO_PHYS + NETX_OFS_XMAC1)
-#define NETX_PA_XMAC2    (NETX_IO_PHYS + NETX_OFS_XMAC2)
-#define NETX_PA_XMAC3    (NETX_IO_PHYS + NETX_OFS_XMAC3)
-#define NETX_PA_XMAC(no) (NETX_IO_PHYS + NETX_OFS_XMAC(no))
-#define NETX_PA_PFIFO    (NETX_IO_PHYS + NETX_OFS_PFIFO)
-#define NETX_PA_XPEC0    (NETX_IO_PHYS + NETX_OFS_XPEC0)
-#define NETX_PA_XPEC1    (NETX_IO_PHYS + NETX_OFS_XPEC1)
-#define NETX_PA_XPEC2    (NETX_IO_PHYS + NETX_OFS_XPEC2)
-#define NETX_PA_XPEC3    (NETX_IO_PHYS + NETX_OFS_XPEC3)
-#define NETX_PA_XPEC(no) (NETX_IO_PHYS + NETX_OFS_XPEC(no))
-#define NETX_PA_VIC      (NETX_IO_PHYS + NETX_OFS_VIC)
-
-/* virual addresses */
-#define NETX_VA_SYSTEM   (NETX_IO_VIRT + NETX_OFS_SYSTEM)
-#define NETX_VA_MEMCR    (NETX_IO_VIRT + NETX_OFS_MEMCR)
-#define NETX_VA_DPMAS    (NETX_IO_VIRT + NETX_OFS_DPMAS)
-#define NETX_VA_GPIO     (NETX_IO_VIRT + NETX_OFS_GPIO)
-#define NETX_VA_PIO      (NETX_IO_VIRT + NETX_OFS_PIO)
-#define NETX_VA_UART0    (NETX_IO_VIRT + NETX_OFS_UART0)
-#define NETX_VA_UART1    (NETX_IO_VIRT + NETX_OFS_UART1)
-#define NETX_VA_UART2    (NETX_IO_VIRT + NETX_OFS_UART2)
-#define NETX_VA_MIIMU    (NETX_IO_VIRT + NETX_OF_MIIMU)
-#define NETX_VA_SPI      (NETX_IO_VIRT + NETX_OFS_SPI)
-#define NETX_VA_I2C      (NETX_IO_VIRT + NETX_OFS_I2C)
-#define NETX_VA_SYSTIME  (NETX_IO_VIRT + NETX_OFS_SYSTIME)
-#define NETX_VA_RTC      (NETX_IO_VIRT + NETX_OFS_RTC)
-#define NETX_VA_EXTBUS   (NETX_IO_VIRT + NETX_OFS_EXTBUS)
-#define NETX_VA_LCD      (NETX_IO_VIRT + NETX_OFS_LCD)
-#define NETX_VA_USB      (NETX_IO_VIRT + NETX_OFS_USB)
-#define NETX_VA_XMAC0    (NETX_IO_VIRT + NETX_OFS_XMAC0)
-#define NETX_VA_XMAC1    (NETX_IO_VIRT + NETX_OFS_XMAC1)
-#define NETX_VA_XMAC2    (NETX_IO_VIRT + NETX_OFS_XMAC2)
-#define NETX_VA_XMAC3    (NETX_IO_VIRT + NETX_OFS_XMAC3)
-#define NETX_VA_XMAC(no) (NETX_IO_VIRT + NETX_OFS_XMAC(no))
-#define NETX_VA_PFIFO    (NETX_IO_VIRT + NETX_OFS_PFIFO)
-#define NETX_VA_XPEC0    (NETX_IO_VIRT + NETX_OFS_XPEC0)
-#define NETX_VA_XPEC1    (NETX_IO_VIRT + NETX_OFS_XPEC1)
-#define NETX_VA_XPEC2    (NETX_IO_VIRT + NETX_OFS_XPEC2)
-#define NETX_VA_XPEC3    (NETX_IO_VIRT + NETX_OFS_XPEC3)
-#define NETX_VA_XPEC(no) (NETX_IO_VIRT + NETX_OFS_XPEC(no))
-#define NETX_VA_VIC      (NETX_IO_VIRT + NETX_OFS_VIC)
-
-/*********************************
- * System functions              *
- *********************************/
-
-/* Registers */
-#define NETX_SYSTEM_REG(ofs)            __io(NETX_VA_SYSTEM + (ofs))
-#define NETX_SYSTEM_BOO_SR          NETX_SYSTEM_REG(0x00)
-#define NETX_SYSTEM_IOC_CR          NETX_SYSTEM_REG(0x04)
-#define NETX_SYSTEM_IOC_MR          NETX_SYSTEM_REG(0x08)
-
-/* FIXME: Docs are not consistent */
-/* #define NETX_SYSTEM_RES_CR          NETX_SYSTEM_REG(0x08) */
-#define NETX_SYSTEM_RES_CR          NETX_SYSTEM_REG(0x0c)
-
-#define NETX_SYSTEM_PHY_CONTROL     NETX_SYSTEM_REG(0x10)
-#define NETX_SYSTEM_REV             NETX_SYSTEM_REG(0x34)
-#define NETX_SYSTEM_IOC_ACCESS_KEY  NETX_SYSTEM_REG(0x70)
-#define NETX_SYSTEM_WDG_TR          NETX_SYSTEM_REG(0x200)
-#define NETX_SYSTEM_WDG_CTR         NETX_SYSTEM_REG(0x204)
-#define NETX_SYSTEM_WDG_IRQ_TIMEOUT NETX_SYSTEM_REG(0x208)
-#define NETX_SYSTEM_WDG_RES_TIMEOUT NETX_SYSTEM_REG(0x20c)
-
-/* Bits */
-#define NETX_SYSTEM_RES_CR_RSTIN         (1<<0)
-#define NETX_SYSTEM_RES_CR_WDG_RES       (1<<1)
-#define NETX_SYSTEM_RES_CR_HOST_RES      (1<<2)
-#define NETX_SYSTEM_RES_CR_FIRMW_RES     (1<<3)
-#define NETX_SYSTEM_RES_CR_XPEC0_RES     (1<<4)
-#define NETX_SYSTEM_RES_CR_XPEC1_RES     (1<<5)
-#define NETX_SYSTEM_RES_CR_XPEC2_RES     (1<<6)
-#define NETX_SYSTEM_RES_CR_XPEC3_RES     (1<<7)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC0_RES (1<<16)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC1_RES (1<<17)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC2_RES (1<<18)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC3_RES (1<<19)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG0    (1<<20)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG1    (1<<21)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG2    (1<<22)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG3    (1<<23)
-#define NETX_SYSTEM_RES_CR_FIRMW_RES_EN  (1<<24)
-#define NETX_SYSTEM_RES_CR_RSTOUT        (1<<25)
-#define NETX_SYSTEM_RES_CR_EN_RSTOUT     (1<<26)
-
-#define PHY_CONTROL_RESET            (1<<31)
-#define PHY_CONTROL_SIM_BYP          (1<<30)
-#define PHY_CONTROL_CLK_XLATIN       (1<<29)
-#define PHY_CONTROL_PHY1_EN          (1<<21)
-#define PHY_CONTROL_PHY1_NP_MSG_CODE
-#define PHY_CONTROL_PHY1_AUTOMDIX    (1<<17)
-#define PHY_CONTROL_PHY1_FIXMODE     (1<<16)
-#define PHY_CONTROL_PHY1_MODE(mode)  (((mode) & 0x7) << 13)
-#define PHY_CONTROL_PHY0_EN          (1<<12)
-#define PHY_CONTROL_PHY0_NP_MSG_CODE
-#define PHY_CONTROL_PHY0_AUTOMDIX    (1<<8)
-#define PHY_CONTROL_PHY0_FIXMODE     (1<<7)
-#define PHY_CONTROL_PHY0_MODE(mode)  (((mode) & 0x7) << 4)
-#define PHY_CONTROL_PHY_ADDRESS(adr) ((adr) & 0xf)
-
-#define PHY_MODE_10BASE_T_HALF      0
-#define PHY_MODE_10BASE_T_FULL      1
-#define PHY_MODE_100BASE_TX_FX_FULL 2
-#define PHY_MODE_100BASE_TX_FX_HALF 3
-#define PHY_MODE_100BASE_TX_HALF    4
-#define PHY_MODE_REPEATER           5
-#define PHY_MODE_POWER_DOWN         6
-#define PHY_MODE_ALL                7
-
-/* Bits */
-#define VECT_CNTL_ENABLE               (1 << 5)
-
-/*******************************
- * GPIO and timer module       *
- *******************************/
-
-/* Registers */
-#define NETX_GPIO_REG(ofs)                     __io(NETX_VA_GPIO + (ofs))
-#define NETX_GPIO_CFG(gpio)                NETX_GPIO_REG(0x0  + ((gpio)<<2))
-#define NETX_GPIO_THRESHOLD_CAPTURE(gpio)  NETX_GPIO_REG(0x40 + ((gpio)<<2))
-#define NETX_GPIO_COUNTER_CTRL(counter)    NETX_GPIO_REG(0x80 + ((counter)<<2))
-#define NETX_GPIO_COUNTER_MAX(counter)     NETX_GPIO_REG(0x94 + ((counter)<<2))
-#define NETX_GPIO_COUNTER_CURRENT(counter) NETX_GPIO_REG(0xa8 + ((counter)<<2))
-#define NETX_GPIO_IRQ_ENABLE               NETX_GPIO_REG(0xbc)
-#define NETX_GPIO_IRQ_DISABLE              NETX_GPIO_REG(0xc0)
-#define NETX_GPIO_SYSTIME_NS_CMP           NETX_GPIO_REG(0xc4)
-#define NETX_GPIO_LINE                     NETX_GPIO_REG(0xc8)
-#define NETX_GPIO_IRQ                      NETX_GPIO_REG(0xd0)
-
-/* Bits */
-#define NETX_GPIO_CFG_IOCFG_GP_INPUT                 (0x0)
-#define NETX_GPIO_CFG_IOCFG_GP_OUTPUT                (0x1)
-#define NETX_GPIO_CFG_IOCFG_GP_UART                  (0x2)
-#define NETX_GPIO_CFG_INV                            (1<<2)
-#define NETX_GPIO_CFG_MODE_INPUT_READ                (0<<3)
-#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_CONT_RISING (1<<3)
-#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_ONCE_RISING (2<<3)
-#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_HIGH_LEVEL  (3<<3)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER0             (0<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER1             (1<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER2             (2<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER3             (3<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER4             (4<<5)
-#define NETX_GPIO_CFG_COUNT_REF_SYSTIME              (7<<5)
-
-#define NETX_GPIO_COUNTER_CTRL_RUN                   (1<<0)
-#define NETX_GPIO_COUNTER_CTRL_SYM                   (1<<1)
-#define NETX_GPIO_COUNTER_CTRL_ONCE                  (1<<2)
-#define NETX_GPIO_COUNTER_CTRL_IRQ_EN                (1<<3)
-#define NETX_GPIO_COUNTER_CTRL_CNT_EVENT             (1<<4)
-#define NETX_GPIO_COUNTER_CTRL_RST_EN                (1<<5)
-#define NETX_GPIO_COUNTER_CTRL_SEL_EVENT             (1<<6)
-#define NETX_GPIO_COUNTER_CTRL_GPIO_REF /* FIXME */
-
-#define GPIO_BIT(gpio)                     (1<<(gpio))
-#define COUNTER_BIT(counter)               ((1<<16)<<(counter))
-
-/*******************************
- * PIO                         *
- *******************************/
-
-/* Registers */
-#define NETX_PIO_REG(ofs)        __io(NETX_VA_PIO + (ofs))
-#define NETX_PIO_INPIO       NETX_PIO_REG(0x0)
-#define NETX_PIO_OUTPIO      NETX_PIO_REG(0x4)
-#define NETX_PIO_OEPIO       NETX_PIO_REG(0x8)
-
-/*******************************
- * MII Unit                    *
- *******************************/
-
-/* Registers */
-#define NETX_MIIMU           __io(NETX_VA_MIIMU)
-
-/* Bits */
-#define MIIMU_SNRDY        (1<<0)
-#define MIIMU_PREAMBLE     (1<<1)
-#define MIIMU_OPMODE_WRITE (1<<2)
-#define MIIMU_MDC_PERIOD   (1<<3)
-#define MIIMU_PHY_NRES     (1<<4)
-#define MIIMU_RTA          (1<<5)
-#define MIIMU_REGADDR(adr) (((adr) & 0x1f) << 6)
-#define MIIMU_PHYADDR(adr) (((adr) & 0x1f) << 11)
-#define MIIMU_DATA(data)   (((data) & 0xffff) << 16)
-
-/*******************************
- * xmac / xpec                 *
- *******************************/
-
-/* XPEC register offsets relative to NETX_VA_XPEC(no) */
-#define NETX_XPEC_R0_OFS           0x00
-#define NETX_XPEC_R1_OFS           0x04
-#define NETX_XPEC_R2_OFS           0x08
-#define NETX_XPEC_R3_OFS           0x0c
-#define NETX_XPEC_R4_OFS           0x10
-#define NETX_XPEC_R5_OFS           0x14
-#define NETX_XPEC_R6_OFS           0x18
-#define NETX_XPEC_R7_OFS           0x1c
-#define NETX_XPEC_RANGE01_OFS      0x20
-#define NETX_XPEC_RANGE23_OFS      0x24
-#define NETX_XPEC_RANGE45_OFS      0x28
-#define NETX_XPEC_RANGE67_OFS      0x2c
-#define NETX_XPEC_PC_OFS           0x48
-#define NETX_XPEC_TIMER_OFS(timer) (0x30 + ((timer)<<2))
-#define NETX_XPEC_IRQ_OFS          0x8c
-#define NETX_XPEC_SYSTIME_NS_OFS   0x90
-#define NETX_XPEC_FIFO_DATA_OFS    0x94
-#define NETX_XPEC_SYSTIME_S_OFS    0x98
-#define NETX_XPEC_ADC_OFS          0x9c
-#define NETX_XPEC_URX_COUNT_OFS    0x40
-#define NETX_XPEC_UTX_COUNT_OFS    0x44
-#define NETX_XPEC_PC_OFS           0x48
-#define NETX_XPEC_ZERO_OFS         0x4c
-#define NETX_XPEC_STATCFG_OFS      0x50
-#define NETX_XPEC_EC_MASKA_OFS     0x54
-#define NETX_XPEC_EC_MASKB_OFS     0x58
-#define NETX_XPEC_EC_MASK0_OFS     0x5c
-#define NETX_XPEC_EC_MASK8_OFS     0x7c
-#define NETX_XPEC_EC_MASK9_OFS     0x80
-#define NETX_XPEC_XPU_HOLD_PC_OFS  0x100
-#define NETX_XPEC_RAM_START_OFS    0x2000
-
-/* Bits */
-#define XPU_HOLD_PC (1<<0)
-
-/* XMAC register offsets relative to NETX_VA_XMAC(no) */
-#define NETX_XMAC_RPU_PROGRAM_START_OFS       0x000
-#define NETX_XMAC_RPU_PROGRAM_END_OFS         0x3ff
-#define NETX_XMAC_TPU_PROGRAM_START_OFS       0x400
-#define NETX_XMAC_TPU_PROGRAM_END_OFS         0x7ff
-#define NETX_XMAC_RPU_HOLD_PC_OFS             0xa00
-#define NETX_XMAC_TPU_HOLD_PC_OFS             0xa04
-#define NETX_XMAC_STATUS_SHARED0_OFS          0x840
-#define NETX_XMAC_CONFIG_SHARED0_OFS          0x844
-#define NETX_XMAC_STATUS_SHARED1_OFS          0x848
-#define NETX_XMAC_CONFIG_SHARED1_OFS          0x84c
-#define NETX_XMAC_STATUS_SHARED2_OFS          0x850
-#define NETX_XMAC_CONFIG_SHARED2_OFS          0x854
-#define NETX_XMAC_STATUS_SHARED3_OFS          0x858
-#define NETX_XMAC_CONFIG_SHARED3_OFS          0x85c
-
-#define RPU_HOLD_PC            (1<<15)
-#define TPU_HOLD_PC            (1<<15)
-
-/*******************************
- * Pointer FIFO                *
- *******************************/
-
-/* Registers */
-#define NETX_PFIFO_REG(ofs)               __io(NETX_VA_PFIFO + (ofs))
-#define NETX_PFIFO_BASE(pfifo)        NETX_PFIFO_REG(0x00 + ((pfifo)<<2))
-#define NETX_PFIFO_BORDER_BASE(pfifo) NETX_PFIFO_REG(0x80 + ((pfifo)<<2))
-#define NETX_PFIFO_RESET              NETX_PFIFO_REG(0x100)
-#define NETX_PFIFO_FULL               NETX_PFIFO_REG(0x104)
-#define NETX_PFIFO_EMPTY              NETX_PFIFO_REG(0x108)
-#define NETX_PFIFO_OVEFLOW            NETX_PFIFO_REG(0x10c)
-#define NETX_PFIFO_UNDERRUN           NETX_PFIFO_REG(0x110)
-#define NETX_PFIFO_FILL_LEVEL(pfifo)  NETX_PFIFO_REG(0x180 + ((pfifo)<<2))
-#define NETX_PFIFO_XPEC_ISR(xpec)     NETX_PFIFO_REG(0x400 + ((xpec) << 2))
-
-/*******************************
- * Dual Port Memory            *
- *******************************/
-
-/* Registers */
-#define NETX_DPMAS_REG(ofs)               __io(NETX_VA_DPMAS + (ofs))
-#define NETX_DPMAS_SYS_STAT           NETX_DPMAS_REG(0x4d8)
-#define NETX_DPMAS_INT_STAT           NETX_DPMAS_REG(0x4e0)
-#define NETX_DPMAS_INT_EN             NETX_DPMAS_REG(0x4f0)
-#define NETX_DPMAS_IF_CONF0           NETX_DPMAS_REG(0x608)
-#define NETX_DPMAS_IF_CONF1           NETX_DPMAS_REG(0x60c)
-#define NETX_DPMAS_EXT_CONFIG(cs)     NETX_DPMAS_REG(0x610 + 4 * (cs))
-#define NETX_DPMAS_IO_MODE0           NETX_DPMAS_REG(0x620) /* I/O 32..63 */
-#define NETX_DPMAS_DRV_EN0            NETX_DPMAS_REG(0x624)
-#define NETX_DPMAS_DATA0              NETX_DPMAS_REG(0x628)
-#define NETX_DPMAS_IO_MODE1           NETX_DPMAS_REG(0x630) /* I/O 64..84 */
-#define NETX_DPMAS_DRV_EN1            NETX_DPMAS_REG(0x634)
-#define NETX_DPMAS_DATA1              NETX_DPMAS_REG(0x638)
-
-/* Bits */
-#define NETX_DPMAS_INT_EN_GLB_EN         (1<<31)
-#define NETX_DPMAS_INT_EN_MEM_LCK        (1<<30)
-#define NETX_DPMAS_INT_EN_WDG            (1<<29)
-#define NETX_DPMAS_INT_EN_PIO72          (1<<28)
-#define NETX_DPMAS_INT_EN_PIO47          (1<<27)
-#define NETX_DPMAS_INT_EN_PIO40          (1<<26)
-#define NETX_DPMAS_INT_EN_PIO36          (1<<25)
-#define NETX_DPMAS_INT_EN_PIO35          (1<<24)
-
-#define NETX_DPMAS_IF_CONF0_HIF_DISABLED (0<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_EXT_BUS  (1<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_UP_8BIT  (2<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_UP_16BIT (3<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_IO       (4<<28)
-#define NETX_DPMAS_IF_CONF0_WAIT_DRV_PP  (1<<14)
-#define NETX_DPMAS_IF_CONF0_WAIT_DRV_OD  (2<<14)
-#define NETX_DPMAS_IF_CONF0_WAIT_DRV_TRI (3<<14)
-
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO35 (1<<26)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO36 (1<<27)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO40 (1<<28)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO47 (1<<29)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO72 (1<<30)
-
-#define NETX_EXT_CONFIG_TALEWIDTH(x) (((x) & 0x7) << 29)
-#define NETX_EXT_CONFIG_TADRHOLD(x)  (((x) & 0x7) << 26)
-#define NETX_EXT_CONFIG_TCSON(x)     (((x) & 0x7) << 23)
-#define NETX_EXT_CONFIG_TRDON(x)     (((x) & 0x7) << 20)
-#define NETX_EXT_CONFIG_TWRON(x)     (((x) & 0x7)  << 17)
-#define NETX_EXT_CONFIG_TWROFF(x)    (((x) & 0x1f) << 12)
-#define NETX_EXT_CONFIG_TRDWRCYC(x)  (((x) & 0x1f) << 7)
-#define NETX_EXT_CONFIG_WAIT_POL     (1<<6)
-#define NETX_EXT_CONFIG_WAIT_EN      (1<<5)
-#define NETX_EXT_CONFIG_NRD_MODE     (1<<4)
-#define NETX_EXT_CONFIG_DS_MODE      (1<<3)
-#define NETX_EXT_CONFIG_NWR_MODE     (1<<2)
-#define NETX_EXT_CONFIG_16BIT        (1<<1)
-#define NETX_EXT_CONFIG_CS_ENABLE    (1<<0)
-
-#define NETX_DPMAS_IO_MODE0_WRL   (1<<13)
-#define NETX_DPMAS_IO_MODE0_WAIT  (1<<14)
-#define NETX_DPMAS_IO_MODE0_READY (1<<15)
-#define NETX_DPMAS_IO_MODE0_CS0   (1<<19)
-#define NETX_DPMAS_IO_MODE0_EXTRD (1<<20)
-
-#define NETX_DPMAS_IO_MODE1_CS2           (1<<15)
-#define NETX_DPMAS_IO_MODE1_CS1           (1<<16)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_NPOR   (0<<30)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_100MHZ (1<<30)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_NPIO36 (2<<30)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_PIO36  (3<<30)
-
-/*******************************
- * I2C                         *
- *******************************/
-#define NETX_I2C_REG(ofs)	__io(NETX_VA_I2C, (ofs))
-#define NETX_I2C_CTRL	NETX_I2C_REG(0x0)
-#define NETX_I2C_DATA	NETX_I2C_REG(0x4)
-
-#endif /* __ASM_ARCH_NETX_REGS_H */
diff --git a/include/asm-arm/arch-netx/param.h b/include/asm-arm/arch-netx/param.h
deleted file mode 100644
index 7a80c26..0000000
--- a/include/asm-arm/arch-netx/param.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-netx/param.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-netx/pfifo.h b/include/asm-arm/arch-netx/pfifo.h
deleted file mode 100644
index 4af2ee4..0000000
--- a/include/asm-arm/arch-netx/pfifo.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * include/asm-arm/arch-netx/pfifo.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-
-#ifndef ASM_ARCH_PFIFO_H
-#define ASM_ARCH_PFIFO_H
-
-static inline int pfifo_push(int no, unsigned int pointer)
-{
-	writel(pointer, NETX_PFIFO_BASE(no));
-	return 0;
-}
-
-static inline unsigned int pfifo_pop(int no)
-{
-	return readl(NETX_PFIFO_BASE(no));
-}
-
-static inline int pfifo_fill_level(int no)
-{
-
-	return readl(NETX_PFIFO_FILL_LEVEL(no));
-}
-
-static inline int pfifo_full(int no)
-{
-	return readl(NETX_PFIFO_FULL) & (1<<no) ? 1 : 0;
-}
-
-static inline int pfifo_empty(int no)
-{
-	return readl(NETX_PFIFO_EMPTY) & (1<<no) ? 1 : 0;
-}
-
-int pfifo_request(unsigned int pfifo_mask);
-void pfifo_free(unsigned int pfifo_mask);
-
-#endif /* ASM_ARCH_PFIFO_H */
diff --git a/include/asm-arm/arch-netx/system.h b/include/asm-arm/arch-netx/system.h
deleted file mode 100644
index 0624d87e..0000000
--- a/include/asm-arm/arch-netx/system.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * include/asm-arm/arch-netx/system.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include "netx-regs.h"
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
-	       NETX_SYSTEM_RES_CR);
-}
-
-#endif
-
diff --git a/include/asm-arm/arch-netx/timex.h b/include/asm-arm/arch-netx/timex.h
deleted file mode 100644
index 7fdb42da..0000000
--- a/include/asm-arm/arch-netx/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-netx/timex.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define CLOCK_TICK_RATE 100000000
diff --git a/include/asm-arm/arch-netx/uncompress.h b/include/asm-arm/arch-netx/uncompress.h
deleted file mode 100644
index f894345..0000000
--- a/include/asm-arm/arch-netx/uncompress.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * include/asm-arm/arch-netx/uncompress.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-
-#define REG(x) (*(volatile unsigned long *)(x))
-
-#define UART1_BASE 0x100a00
-#define UART2_BASE 0x100a80
-
-#define UART_DR 0x0
-
-#define UART_CR 0x14
-#define CR_UART_EN (1<<0)
-
-#define UART_FR 0x18
-#define FR_BUSY (1<<3)
-#define FR_TXFF (1<<5)
-
-static void putc(char c)
-{
-	unsigned long base;
-
-	if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
-		base = UART1_BASE;
-	else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
-		base = UART2_BASE;
-	else
-		return;
-
-	while (REG(base + UART_FR) & FR_TXFF);
-	REG(base + UART_DR) = c;
-}
-
-static inline void flush(void)
-{
-	unsigned long base;
-
-	if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
-		base = UART1_BASE;
-	else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
-		base = UART2_BASE;
-	else
-		return;
-
-	while (REG(base + UART_FR) & FR_BUSY);
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-netx/vmalloc.h b/include/asm-arm/arch-netx/vmalloc.h
deleted file mode 100644
index da2da5a..0000000
--- a/include/asm-arm/arch-netx/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-netx/vmalloc.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-netx/xc.h b/include/asm-arm/arch-netx/xc.h
deleted file mode 100644
index 659af19..0000000
--- a/include/asm-arm/arch-netx/xc.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-netx/xc.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_XC_H
-#define __ASM_ARCH_XC_H
-
-struct xc {
-	int no;
-	unsigned int type;
-	unsigned int version;
-	void __iomem *xpec_base;
-	void __iomem *xmac_base;
-	void __iomem *sram_base;
-	int irq;
-	struct device *dev;
-};
-
-int xc_reset(struct xc *x);
-int xc_stop(struct xc* x);
-int xc_start(struct xc *x);
-int xc_running(struct xc *x);
-int xc_request_firmware(struct xc* x);
-struct xc* request_xc(int xcno, struct device *dev);
-void free_xc(struct xc *x);
-
-#endif /* __ASM_ARCH_XC_H */
diff --git a/include/asm-arm/arch-ns9xxx/board.h b/include/asm-arm/arch-ns9xxx/board.h
deleted file mode 100644
index e57443b..0000000
--- a/include/asm-arm/arch-ns9xxx/board.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/board.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-#include <asm/mach-types.h>
-
-#define board_is_a9m9750dev()	(0			\
-		|| machine_is_cc9p9360dev()		\
-		|| machine_is_cc9p9750dev()		\
-		)
-
-#define board_is_a9mvali()	(0			\
-		|| machine_is_cc9p9360val() 		\
-		|| machine_is_cc9p9750val()		\
-		)
-
-#define board_is_jscc9p9210()	(0			\
-		|| machine_is_cc9p9210js()		\
-		)
-
-#define board_is_jscc9p9215()	(0			\
-		|| machine_is_cc9p9215js()		\
-		)
-
-#define board_is_jscc9p9360()	(0			\
-		|| machine_is_cc9p9360js()		\
-		)
-
-#define board_is_uncbas()	(0			\
-		|| machine_is_cc7ucamry()		\
-		)
-
-#endif /* ifndef __ASM_ARCH_BOARD_H */
diff --git a/include/asm-arm/arch-ns9xxx/debug-macro.S b/include/asm-arm/arch-ns9xxx/debug-macro.S
deleted file mode 100644
index c78908d..0000000
--- a/include/asm-arm/arch-ns9xxx/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/debug-macro.S
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <asm/arch/hardware.h>
-
-#include <asm/arch/regs-board-a9m9750dev.h>
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, =NS9XXX_CSxSTAT_PHYS(0)
-		ldrne	\rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ns9xxx/dma.h b/include/asm-arm/arch-ns9xxx/dma.h
deleted file mode 100644
index a67cbbe..0000000
--- a/include/asm-arm/arch-ns9xxx/dma.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/dma.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#endif /* ifndef __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-ns9xxx/entry-macro.S b/include/asm-arm/arch-ns9xxx/entry-macro.S
deleted file mode 100644
index e9d9449..0000000
--- a/include/asm-arm/arch-ns9xxx/entry-macro.S
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/entry-macro.S
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <asm/arch/hardware.h>
-#include <asm/arch/regs-sys-common.h>
-
-		.macro	get_irqnr_preamble, base, tmp
-		ldr	\base, =SYS_ISRADDR
-		.endm
-
-		.macro	arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)]
-		cmp	\irqstat, #0
-		ldrne	\irqnr, [\base]
-		.endm
-
-		.macro	disable_fiq
-		.endm
diff --git a/include/asm-arm/arch-ns9xxx/gpio.h b/include/asm-arm/arch-ns9xxx/gpio.h
deleted file mode 100644
index adbca08..0000000
--- a/include/asm-arm/arch-ns9xxx/gpio.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/gpio.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
-*/
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <asm/errno.h>
-
-int gpio_request(unsigned gpio, const char *label);
-
-void gpio_free(unsigned gpio);
-
-int ns9xxx_gpio_configure(unsigned gpio, int inv, int func);
-
-int gpio_direction_input(unsigned gpio);
-
-int gpio_direction_output(unsigned gpio, int value);
-
-int gpio_get_value(unsigned gpio);
-
-void gpio_set_value(unsigned gpio, int value);
-
-/*
- * ns9xxx can use gpio pins to trigger an irq, but it's not generic
- * enough to be supported by the gpio_to_irq/irq_to_gpio interface
- */
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return -EINVAL;
-}
-
-/* get the cansleep() stubs */
-#include <asm-generic/gpio.h>
-
-#endif /* ifndef __ASM_ARCH_GPIO_H */
diff --git a/include/asm-arm/arch-ns9xxx/hardware.h b/include/asm-arm/arch-ns9xxx/hardware.h
deleted file mode 100644
index 0dca11c..0000000
--- a/include/asm-arm/arch-ns9xxx/hardware.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/hardware.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/memory.h>
-
-/*
- * NetSilicon NS9xxx internal mapping:
- *
- * physical                <--> virtual
- * 0x90000000 - 0x906fffff <--> 0xf9000000 - 0xf96fffff
- * 0xa0100000 - 0xa0afffff <--> 0xfa100000 - 0xfaafffff
- */
-#define io_p2v(x)	(0xf0000000 \
-			 + (((x) & 0xf0000000) >> 4) \
-			 + ((x) & 0x00ffffff))
-
-#define io_v2p(x)	((((x) & 0x0f000000) << 4) \
-			 + ((x) & 0x00ffffff))
-
-#define __REGSHIFT(mask)	((mask) & (-(mask)))
-
-#define __REGBIT(bit)		((u32)1 << (bit))
-#define __REGBITS(hbit, lbit)	((((u32)1 << ((hbit) - (lbit) + 1)) - 1) << (lbit))
-#define __REGVAL(mask, value)	(((value) * __REGSHIFT(mask)) & (mask))
-
-#ifndef __ASSEMBLY__
-
-#  define __REG(x)	((void __iomem __force *)io_p2v((x)))
-#  define __REG2(x, y)	((void __iomem __force *)(io_p2v((x)) + 4 * (y)))
-
-#  define __REGSET(var, field, value)					\
-	((var) = (((var) & ~((field) & ~(value))) | (value)))
-
-#  define REGSET(var, reg, field, value)				\
-	__REGSET(var, reg ## _ ## field, reg ## _ ## field ## _ ## value)
-
-#  define REGSET_IDX(var, reg, field, idx, value)			\
-	__REGSET(var, reg ## _ ## field((idx)), reg ## _ ## field ## _ ## value((idx)))
-
-#  define REGSETIM(var, reg, field, value)				\
-	__REGSET(var, reg ## _ ## field, __REGVAL(reg ## _ ## field, (value)))
-
-#  define REGSETIM_IDX(var, reg, field, idx, value)			\
-	__REGSET(var, reg ## _ ## field((idx)), __REGVAL(reg ## _ ## field((idx)), (value)))
-
-#  define __REGGET(var, field)						\
-	(((var) & (field)))
-
-#  define REGGET(var, reg, field)					\
-	 __REGGET(var, reg ## _ ## field)
-
-#  define REGGET_IDX(var, reg, field, idx)				\
-	 __REGGET(var, reg ## _ ## field((idx)))
-
-#  define REGGETIM(var, reg, field)					\
-	 __REGGET(var, reg ## _ ## field) / __REGSHIFT(reg ## _ ## field)
-
-#  define REGGETIM_IDX(var, reg, field, idx)				\
-	 __REGGET(var, reg ## _ ## field((idx))) /			\
-	 __REGSHIFT(reg ## _ ## field((idx)))
-
-#else
-
-#  define __REG(x)	io_p2v(x)
-#  define __REG2(x, y)	io_p2v((x) + 4 * (y))
-
-#endif
-
-#endif /* ifndef __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-ns9xxx/io.h b/include/asm-arm/arch-ns9xxx/io.h
deleted file mode 100644
index 6f82d28..0000000
--- a/include/asm-arm/arch-ns9xxx/io.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/io.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT  0xffffffff /* XXX */
-
-#define __io(a)         ((void __iomem *)(a))
-#define __mem_pci(a)    (a)
-#define __mem_isa(a)    (IO_BASE + (a))
-
-#endif /* ifndef __ASM_ARCH_IO_H */
diff --git a/include/asm-arm/arch-ns9xxx/irqs.h b/include/asm-arm/arch-ns9xxx/irqs.h
deleted file mode 100644
index e83d48e..0000000
--- a/include/asm-arm/arch-ns9xxx/irqs.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/irqs.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-/* NetSilicon 9360 */
-#define IRQ_NS9XXX_WATCHDOG	0
-#define IRQ_NS9XXX_AHBBUSERR	1
-#define IRQ_NS9360_BBUSAGG	2
-/* irq 3 is reserved for NS9360 */
-#define IRQ_NS9XXX_ETHRX	4
-#define IRQ_NS9XXX_ETHTX	5
-#define IRQ_NS9XXX_ETHPHY	6
-#define IRQ_NS9360_LCD		7
-#define IRQ_NS9360_SERBRX	8
-#define IRQ_NS9360_SERBTX	9
-#define IRQ_NS9360_SERARX	10
-#define IRQ_NS9360_SERATX	11
-#define IRQ_NS9360_SERCRX	12
-#define IRQ_NS9360_SERCTX	13
-#define IRQ_NS9360_I2C		14
-#define IRQ_NS9360_BBUSDMA	15
-#define IRQ_NS9360_TIMER0	16
-#define IRQ_NS9360_TIMER1	17
-#define IRQ_NS9360_TIMER2	18
-#define IRQ_NS9360_TIMER3	19
-#define IRQ_NS9360_TIMER4	20
-#define IRQ_NS9360_TIMER5	21
-#define IRQ_NS9360_TIMER6	22
-#define IRQ_NS9360_TIMER7	23
-#define IRQ_NS9360_RTC		24
-#define IRQ_NS9360_USBHOST	25
-#define IRQ_NS9360_USBDEVICE	26
-#define IRQ_NS9360_IEEE1284	27
-#define IRQ_NS9XXX_EXT0		28
-#define IRQ_NS9XXX_EXT1		29
-#define IRQ_NS9XXX_EXT2		30
-#define IRQ_NS9XXX_EXT3		31
-
-#define BBUS_IRQ(irq)	(32 + irq)
-
-#define IRQ_BBUS_DMA		BBUS_IRQ(0)
-#define IRQ_BBUS_SERBRX		BBUS_IRQ(2)
-#define IRQ_BBUS_SERBTX		BBUS_IRQ(3)
-#define IRQ_BBUS_SERARX		BBUS_IRQ(4)
-#define IRQ_BBUS_SERATX		BBUS_IRQ(5)
-#define IRQ_BBUS_SERCRX		BBUS_IRQ(6)
-#define IRQ_BBUS_SERCTX		BBUS_IRQ(7)
-#define IRQ_BBUS_SERDRX		BBUS_IRQ(8)
-#define IRQ_BBUS_SERDTX		BBUS_IRQ(9)
-#define IRQ_BBUS_I2C		BBUS_IRQ(10)
-#define IRQ_BBUS_1284		BBUS_IRQ(11)
-#define IRQ_BBUS_UTIL		BBUS_IRQ(12)
-#define IRQ_BBUS_RTC		BBUS_IRQ(13)
-#define IRQ_BBUS_USBHST		BBUS_IRQ(14)
-#define IRQ_BBUS_USBDEV		BBUS_IRQ(15)
-#define IRQ_BBUS_AHBDMA1	BBUS_IRQ(24)
-#define IRQ_BBUS_AHBDMA2	BBUS_IRQ(25)
-
-/*
- * these Interrupts are specific for the a9m9750dev board.
- * They are generated by an FPGA that interrupts the CPU on
- * IRQ_NS9360_EXT2
- */
-#define FPGA_IRQ(irq)	(64 + irq)
-
-#define IRQ_FPGA_UARTA		FPGA_IRQ(0)
-#define IRQ_FPGA_UARTB		FPGA_IRQ(1)
-#define IRQ_FPGA_UARTC		FPGA_IRQ(2)
-#define IRQ_FPGA_UARTD		FPGA_IRQ(3)
-#define IRQ_FPGA_TOUCH		FPGA_IRQ(4)
-#define IRQ_FPGA_CF		FPGA_IRQ(5)
-#define IRQ_FPGA_CAN0		FPGA_IRQ(6)
-#define IRQ_FPGA_CAN1		FPGA_IRQ(7)
-
-#define NR_IRQS	72
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/include/asm-arm/arch-ns9xxx/memory.h b/include/asm-arm/arch-ns9xxx/memory.h
deleted file mode 100644
index ce1343e..0000000
--- a/include/asm-arm/arch-ns9xxx/memory.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/memory.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
-*/
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/* x in [0..3] */
-#define NS9XXX_CSxSTAT_PHYS(x)	UL(((x) + 4) << 28)
-
-#define NS9XXX_CS0STAT_LENGTH	UL(0x1000)
-#define NS9XXX_CS1STAT_LENGTH	UL(0x1000)
-#define NS9XXX_CS2STAT_LENGTH	UL(0x1000)
-#define NS9XXX_CS3STAT_LENGTH	UL(0x1000)
-
-#define PHYS_OFFSET	UL(0x00000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-ns9xxx/module.h b/include/asm-arm/arch-ns9xxx/module.h
deleted file mode 100644
index ac08a31..0000000
--- a/include/asm-arm/arch-ns9xxx/module.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/module.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_MODULE_H
-#define __ASM_ARCH_MODULE_H
-
-#include <asm/mach-types.h>
-
-#define module_is_cc7ucamry()	(0			\
-		|| machine_is_cc7ucamry()		\
-		)
-
-#define module_is_cc9c()	(0			\
-		|| machine_is_cc9c()			\
-		)
-
-#define module_is_cc9p9210()	(0			\
-		|| machine_is_cc9p9210()		\
-		|| machine_is_cc9p9210js()		\
-		)
-
-#define module_is_cc9p9215()	(0			\
-		|| machine_is_cc9p9215()		\
-		|| machine_is_cc9p9215js()		\
-		)
-
-#define module_is_cc9p9360()	(0			\
-		|| machine_is_a9m9360()			\
-		|| machine_is_cc9p9360dev()		\
-		|| machine_is_cc9p9360js()		\
-		|| machine_is_cc9p9360val()		\
-		)
-
-#define module_is_cc9p9750()	(0			\
-		|| machine_is_a9m9750()			\
-		|| machine_is_cc9p9750dev()		\
-		|| machine_is_cc9p9750js()		\
-		|| machine_is_cc9p9750val()		\
-		)
-
-#define module_is_ccw9c()	(0			\
-		|| machine_is_ccw9c()			\
-		)
-
-#define module_is_inc20otter()	(0			\
-		|| machine_is_inc20otter()		\
-		)
-
-#define module_is_otter()	(0			\
-		|| machine_is_otter()			\
-		)
-
-#endif /* ifndef __ASM_ARCH_MODULE_H */
diff --git a/include/asm-arm/arch-ns9xxx/processor-ns9360.h b/include/asm-arm/arch-ns9xxx/processor-ns9360.h
deleted file mode 100644
index f3aa6c5..0000000
--- a/include/asm-arm/arch-ns9xxx/processor-ns9360.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/processor-ns9360.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_PROCESSORNS9360_H
-#define __ASM_ARCH_PROCESSORNS9360_H
-
-#include <linux/init.h>
-
-void ns9360_reset(char mode);
-
-unsigned long ns9360_systemclock(void) __attribute__((const));
-
-static inline unsigned long ns9360_cpuclock(void) __attribute__((const));
-static inline unsigned long ns9360_cpuclock(void)
-{
-	return ns9360_systemclock() / 2;
-}
-
-void __init ns9360_map_io(void);
-
-extern struct sys_timer ns9360_timer;
-
-int ns9360_gpio_configure(unsigned gpio, int inv, int func);
-
-#endif /* ifndef __ASM_ARCH_PROCESSORNS9360_H */
diff --git a/include/asm-arm/arch-ns9xxx/processor.h b/include/asm-arm/arch-ns9xxx/processor.h
deleted file mode 100644
index 3137e5b..0000000
--- a/include/asm-arm/arch-ns9xxx/processor.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/processor.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_PROCESSOR_H
-#define __ASM_ARCH_PROCESSOR_H
-
-#include <asm/arch/module.h>
-
-#define processor_is_ns9210()	(0			\
-		|| module_is_cc7ucamry()		\
-		|| module_is_cc9p9210()			\
-		|| module_is_inc20otter()		\
-		|| module_is_otter()			\
-		)
-
-#define processor_is_ns9215()	(0			\
-		|| module_is_cc9p9215()			\
-		)
-
-#define processor_is_ns9360()	(0			\
-		|| module_is_cc9p9360()			\
-		|| module_is_cc9c()			\
-		|| module_is_ccw9c()			\
-		)
-
-#define processor_is_ns9750()	(0			\
-		|| module_is_cc9p9750()			\
-		)
-
-#define processor_is_ns921x()	(0			\
-		|| processor_is_ns9210()		\
-		|| processor_is_ns9215()		\
-		)
-
-#endif /* ifndef __ASM_ARCH_PROCESSOR_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-bbu.h b/include/asm-arm/arch-ns9xxx/regs-bbu.h
deleted file mode 100644
index b41b31d..0000000
--- a/include/asm-arm/arch-ns9xxx/regs-bbu.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/regs-bbu.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_REGSBBU_H
-#define __ASM_ARCH_REGSBBU_H
-
-#include <asm/arch/hardware.h>
-
-/* BBus Utility */
-
-/* GPIO Configuration Registers block 1 */
-/* NOTE: the HRM starts counting at 1 for the GPIO registers, here the start is
- * at 0 for each block.  That is, BBU_GCONFb1(0) is GPIO Configuration Register
- * #1, BBU_GCONFb2(0) is GPIO Configuration Register #8. */
-#define BBU_GCONFb1(x)	__REG2(0x90600010, (x))
-#define BBU_GCONFb2(x)	__REG2(0x90600100, (x))
-
-#define BBU_GCONFx_DIR(m)	__REGBIT(3 + (((m) & 7) << 2))
-#define BBU_GCONFx_DIR_INPUT(m)	__REGVAL(BBU_GCONFx_DIR(m), 0)
-#define BBU_GCONFx_DIR_OUTPUT(m)	__REGVAL(BBU_GCONFx_DIR(m), 1)
-#define BBU_GCONFx_INV(m)	__REGBIT(2 + (((m) & 7) << 2))
-#define BBU_GCONFx_INV_NO(m)		__REGVAL(BBU_GCONFx_INV(m), 0)
-#define BBU_GCONFx_INV_YES(m)		__REGVAL(BBU_GCONFx_INV(m), 1)
-#define BBU_GCONFx_FUNC(m)	__REGBITS(1 + (((m) & 7) << 2), ((m) & 7) << 2)
-#define BBU_GCONFx_FUNC_0(m)		__REGVAL(BBU_GCONFx_FUNC(m), 0)
-#define BBU_GCONFx_FUNC_1(m)		__REGVAL(BBU_GCONFx_FUNC(m), 1)
-#define BBU_GCONFx_FUNC_2(m)		__REGVAL(BBU_GCONFx_FUNC(m), 2)
-#define BBU_GCONFx_FUNC_3(m)		__REGVAL(BBU_GCONFx_FUNC(m), 3)
-
-#define BBU_GCTRL1	__REG(0x90600030)
-#define BBU_GCTRL2	__REG(0x90600034)
-#define BBU_GCTRL3	__REG(0x90600120)
-
-#define BBU_GSTAT1	__REG(0x90600040)
-#define BBU_GSTAT2	__REG(0x90600044)
-#define BBU_GSTAT3	__REG(0x90600130)
-
-#endif /* ifndef __ASM_ARCH_REGSBBU_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h b/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h
deleted file mode 100644
index 6bf1ed2..0000000
--- a/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_REGSBOARDA9M9750_H
-#define __ASM_ARCH_REGSBOARDA9M9750_H
-
-#include <asm/arch/hardware.h>
-
-#define FPGA_UARTA_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0))
-#define FPGA_UARTB_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x08)
-#define FPGA_UARTC_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x10)
-#define FPGA_UARTD_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x18)
-
-#define FPGA_IER	__REG(NS9XXX_CSxSTAT_PHYS(0) + 0x50)
-#define FPGA_ISR	__REG(NS9XXX_CSxSTAT_PHYS(0) + 0x60)
-
-#endif /* ifndef __ASM_ARCH_REGSBOARDA9M9750_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-mem.h b/include/asm-arm/arch-ns9xxx/regs-mem.h
deleted file mode 100644
index 023f7be..0000000
--- a/include/asm-arm/arch-ns9xxx/regs-mem.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/regs-mem.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_REGSMEM_H
-#define __ASM_ARCH_REGSMEM_H
-
-#include <asm/arch/hardware.h>
-
-/* Memory Module */
-
-/* Control register */
-#define MEM_CTRL	__REG(0xa0700000)
-
-/* Status register */
-#define MEM_STAT	__REG(0xa0700004)
-
-/* Configuration register */
-#define MEM_CONF	__REG(0xa0700008)
-
-/* Dynamic Memory Control register */
-#define MEM_DMCTRL	__REG(0xa0700020)
-
-/* Dynamic Memory Refresh Timer */
-#define MEM_DMRT	__REG(0xa0700024)
-
-/* Dynamic Memory Read Configuration register */
-#define MEM_DMRC	__REG(0xa0700028)
-
-/* Dynamic Memory Precharge Command Period (tRP) */
-#define MEM_DMPCP	__REG(0xa0700030)
-
-/* Dynamic Memory Active to Precharge Command Period (tRAS) */
-#define MEM_DMAPCP	__REG(0xa0700034)
-
-/* Dynamic Memory Self-Refresh Exit Time (tSREX) */
-#define MEM_DMSRET	__REG(0xa0700038)
-
-/* Dynamic Memory Last Data Out to Active Time (tAPR) */
-#define MEM_DMLDOAT	__REG(0xa070003c)
-
-/* Dynamic Memory Data-in to Active Command Time (tDAL or TAPW) */
-#define MEM_DMDIACT	__REG(0xa0700040)
-
-/* Dynamic Memory Write Recovery Time (tWR, tDPL, tRWL, tRDL) */
-#define MEM_DMWRT	__REG(0xa0700044)
-
-/* Dynamic Memory Active to Active Command Period (tRC) */
-#define MEM_DMAACP	__REG(0xa0700048)
-
-/* Dynamic Memory Auto Refresh Period, and Auto Refresh to Active Command Period (tRFC) */
-#define MEM_DMARP	__REG(0xa070004c)
-
-/* Dynamic Memory Exit Self-Refresh to Active Command (tXSR) */
-#define MEM_DMESRAC	__REG(0xa0700050)
-
-/* Dynamic Memory Active Bank A to Active B Time (tRRD) */
-#define MEM_DMABAABT	__REG(0xa0700054)
-
-/* Dynamic Memory Load Mode register to Active Command Time (tMRD) */
-#define MEM_DMLMACT	__REG(0xa0700058)
-
-/* Static Memory Extended Wait */
-#define MEM_SMEW	__REG(0xa0700080)
-
-/* Dynamic Memory Configuration Register x */
-#define MEM_DMCONF(x) 	__REG2(0xa0700100, (x) << 3)
-
-/* Dynamic Memory RAS and CAS Delay x */
-#define MEM_DMRCD(x)	__REG2(0xa0700104, (x) << 3)
-
-/* Static Memory Configuration Register x */
-#define MEM_SMC(x)	__REG2(0xa0700200, (x) << 3)
-
-/* Static Memory Configuration Register x: Write protect */
-#define MEM_SMC_PSMC		__REGBIT(20)
-#define MEM_SMC_PSMC_OFF		__REGVAL(MEM_SMC_PSMC, 0)
-#define MEM_SMC_PSMC_ON			__REGVAL(MEM_SMC_PSMC, 1)
-
-/* Static Memory Configuration Register x: Buffer enable */
-#define MEM_SMC_BSMC		__REGBIT(19)
-#define MEM_SMC_BSMC_OFF		__REGVAL(MEM_SMC_BSMC, 0)
-#define MEM_SMC_BSMC_ON			__REGVAL(MEM_SMC_BSMC, 1)
-
-/* Static Memory Configuration Register x: Extended Wait */
-#define MEM_SMC_EW		__REGBIT(8)
-#define MEM_SMC_EW_OFF			__REGVAL(MEM_SMC_EW, 0)
-#define MEM_SMC_EW_ON			__REGVAL(MEM_SMC_EW, 1)
-
-/* Static Memory Configuration Register x: Byte lane state */
-#define MEM_SMC_PB		__REGBIT(7)
-#define MEM_SMC_PB_0			__REGVAL(MEM_SMC_PB, 0)
-#define MEM_SMC_PB_1			__REGVAL(MEM_SMC_PB, 1)
-
-/* Static Memory Configuration Register x: Chip select polarity */
-#define MEM_SMC_PC		__REGBIT(6)
-#define MEM_SMC_PC_AL			__REGVAL(MEM_SMC_PC, 0)
-#define MEM_SMC_PC_AH			__REGVAL(MEM_SMC_PC, 1)
-
-/* static memory configuration register x: page mode*/
-#define MEM_SMC_PM		__REGBIT(3)
-#define MEM_SMC_PM_DIS			__REGVAL(MEM_SMC_PM, 0)
-#define MEM_SMC_PM_ASYNC		__REGVAL(MEM_SMC_PM, 1)
-
-/* static memory configuration register x: Memory width */
-#define MEM_SMC_MW		__REGBITS(1, 0)
-#define MEM_SMC_MW_8			__REGVAL(MEM_SMC_MW, 0)
-#define MEM_SMC_MW_16			__REGVAL(MEM_SMC_MW, 1)
-#define MEM_SMC_MW_32			__REGVAL(MEM_SMC_MW, 2)
-
-/* Static Memory Write Enable Delay x */
-#define MEM_SMWED(x)	__REG2(0xa0700204, (x) << 3)
-
-/* Static Memory Output Enable Delay x */
-#define MEM_SMOED(x)	__REG2(0xa0700208, (x) << 3)
-
-/* Static Memory Read Delay x */
-#define MEM_SMRD(x)	__REG2(0xa070020c, (x) << 3)
-
-/* Static Memory Page Mode Read Delay 0 */
-#define MEM_SMPMRD(x)	__REG2(0xa0700210, (x) << 3)
-
-/* Static Memory Write Delay */
-#define MEM_SMWD(x)	__REG2(0xa0700214, (x) << 3)
-
-/* Static Memory Turn Round Delay x */
-#define MEM_SWT(x)	__REG2(0xa0700218, (x) << 3)
-
-#endif /* ifndef __ASM_ARCH_REGSMEM_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-sys-common.h b/include/asm-arm/arch-ns9xxx/regs-sys-common.h
deleted file mode 100644
index bc82d5e..0000000
--- a/include/asm-arm/arch-ns9xxx/regs-sys-common.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/regs-sys-common.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_REGSSYSCOMMON_H
-#define __ASM_ARCH_REGSSYSCOMMON_H
-#include <asm/arch/hardware.h>
-
-/* Interrupt Vector Address Register Level x */
-#define SYS_IVA(x)	__REG2(0xa09000c4, (x))
-
-/* Interrupt Configuration registers */
-#define SYS_IC(x)	__REG2(0xa0900144, (x))
-
-/* ISRADDR */
-#define SYS_ISRADDR     __REG(0xa0900164)
-
-/* Interrupt Status Active */
-#define SYS_ISA		__REG(0xa0900168)
-
-/* Interrupt Status Raw */
-#define SYS_ISR		__REG(0xa090016c)
-
-#endif /* ifndef __ASM_ARCH_REGSSYSCOMMON_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h b/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h
deleted file mode 100644
index 821275a..0000000
--- a/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_REGSSYSNS9360_H
-#define __ASM_ARCH_REGSSYSNS9360_H
-
-#include <asm/arch/hardware.h>
-
-/* System Control Module */
-
-/* AHB Arbiter Gen Configuration */
-#define SYS_AHBAGENCONF	__REG(0xa0900000)
-
-/* BRC */
-#define SYS_BRC(x)	__REG2(0xa0900004, (x))
-
-/* Timer x Reload Count register */
-#define SYS_TRC(x)	__REG2(0xa0900044, (x))
-
-/* Timer x Read register */
-#define SYS_TR(x)	__REG2(0xa0900084, (x))
-
-/* Timer Interrupt Status register */
-#define SYS_TIS		__REG(0xa0900170)
-
-/* PLL Configuration register */
-#define SYS_PLL		__REG(0xa0900188)
-
-/* PLL FS status */
-#define SYS_PLL_FS		__REGBITS(24, 23)
-
-/* PLL ND status */
-#define SYS_PLL_ND		__REGBITS(20, 16)
-
-/* PLL Configuration register: PLL SW change */
-#define SYS_PLL_SWC		__REGBIT(15)
-#define SYS_PLL_SWC_NO			__REGVAL(SYS_PLL_SWC, 0)
-#define SYS_PLL_SWC_YES			__REGVAL(SYS_PLL_SWC, 1)
-
-/* Timer x Control register */
-#define SYS_TC(x)	__REG2(0xa0900190, (x))
-
-/* Timer x Control register: Timer enable */
-#define SYS_TCx_TEN		__REGBIT(15)
-#define SYS_TCx_TEN_DIS			__REGVAL(SYS_TCx_TEN, 0)
-#define SYS_TCx_TEN_EN			__REGVAL(SYS_TCx_TEN, 1)
-
-/* Timer x Control register: CPU debug mode */
-#define SYS_TCx_TDBG		__REGBIT(10)
-#define SYS_TCx_TDBG_CONT		__REGVAL(SYS_TCx_TDBG, 0)
-#define SYS_TCx_TDBG_STOP		__REGVAL(SYS_TCx_TDBG, 1)
-
-/* Timer x Control register: Interrupt clear */
-#define SYS_TCx_INTC		__REGBIT(9)
-#define SYS_TCx_INTC_UNSET		__REGVAL(SYS_TCx_INTC, 0)
-#define SYS_TCx_INTC_SET		__REGVAL(SYS_TCx_INTC, 1)
-
-/* Timer x Control register: Timer clock select */
-#define SYS_TCx_TLCS		__REGBITS(8, 6)
-#define SYS_TCx_TLCS_CPU		__REGVAL(SYS_TCx_TLCS, 0)	/* CPU clock */
-#define SYS_TCx_TLCS_DIV2		__REGVAL(SYS_TCx_TLCS, 1)	/* CPU clock / 2 */
-#define SYS_TCx_TLCS_DIV4		__REGVAL(SYS_TCx_TLCS, 2)	/* CPU clock / 4 */
-#define SYS_TCx_TLCS_DIV8		__REGVAL(SYS_TCx_TLCS, 3)	/* CPU clock / 8 */
-#define SYS_TCx_TLCS_DIV16		__REGVAL(SYS_TCx_TLCS, 4)	/* CPU clock / 16 */
-#define SYS_TCx_TLCS_DIV32		__REGVAL(SYS_TCx_TLCS, 5)	/* CPU clock / 32 */
-#define SYS_TCx_TLCS_DIV64		__REGVAL(SYS_TCx_TLCS, 6)	/* CPU clock / 64 */
-#define SYS_TCx_TLCS_EXT		__REGVAL(SYS_TCx_TLCS, 7)
-
-/* Timer x Control register: Timer mode */
-#define SYS_TCx_TM		__REGBITS(5, 4)
-#define SYS_TCx_TM_IEE			__REGVAL(SYS_TCx_TM, 0)		/* Internal timer or external event */
-#define SYS_TCx_TM_ELL			__REGVAL(SYS_TCx_TM, 1)		/* External low-level, gated timer */
-#define SYS_TCx_TM_EHL			__REGVAL(SYS_TCx_TM, 2)		/* External high-level, gated timer */
-#define SYS_TCx_TM_CONCAT		__REGVAL(SYS_TCx_TM, 3)		/* Concatenate the lower timer. */
-
-/* Timer x Control register: Interrupt select */
-#define SYS_TCx_INTS		__REGBIT(3)
-#define SYS_TCx_INTS_DIS		__REGVAL(SYS_TCx_INTS, 0)
-#define SYS_TCx_INTS_EN			__REGVAL(SYS_TCx_INTS, 1)
-
-/* Timer x Control register: Up/down select */
-#define SYS_TCx_UDS		__REGBIT(2)
-#define SYS_TCx_UDS_UP			__REGVAL(SYS_TCx_UDS, 0)
-#define SYS_TCx_UDS_DOWN		__REGVAL(SYS_TCx_UDS, 1)
-
-/* Timer x Control register: 32- or 16-bit timer */
-#define SYS_TCx_TSZ		__REGBIT(1)
-#define SYS_TCx_TSZ_16			__REGVAL(SYS_TCx_TSZ, 0)
-#define SYS_TCx_TSZ_32			__REGVAL(SYS_TCx_TSZ, 1)
-
-/* Timer x Control register: Reload enable */
-#define SYS_TCx_REN		__REGBIT(0)
-#define SYS_TCx_REN_DIS			__REGVAL(SYS_TCx_REN, 0)
-#define SYS_TCx_REN_EN			__REGVAL(SYS_TCx_REN, 1)
-
-/* System Memory Chip Select x Dynamic Memory Base */
-#define SYS_SMCSDMB(x)	__REG2(0xa09001d0, (x) << 1)
-
-/* System Memory Chip Select x Dynamic Memory Mask */
-#define SYS_SMCSDMM(x)	__REG2(0xa09001d4, (x) << 1)
-
-/* System Memory Chip Select x Static Memory Base */
-#define SYS_SMCSSMB(x)	__REG2(0xa09001f0, (x) << 1)
-
-/* System Memory Chip Select x Static Memory Base: Chip select x base */
-#define SYS_SMCSSMB_CSxB	__REGBITS(31, 12)
-
-/* System Memory Chip Select x Static Memory Mask */
-#define SYS_SMCSSMM(x)	__REG2(0xa09001f4, (x) << 1)
-
-/* System Memory Chip Select x Static Memory Mask: Chip select x mask */
-#define SYS_SMCSSMM_CSxM	__REGBITS(31, 12)
-
-/* System Memory Chip Select x Static Memory Mask: Chip select x enable */
-#define SYS_SMCSSMM_CSEx	__REGBIT(0)
-#define SYS_SMCSSMM_CSEx_DIS		__REGVAL(SYS_SMCSSMM_CSEx, 0)
-#define SYS_SMCSSMM_CSEx_EN		__REGVAL(SYS_SMCSSMM_CSEx, 1)
-
-/* General purpose, user-defined ID register */
-#define SYS_GENID	__REG(0xa0900210)
-
-/* External Interrupt x Control register */
-#define SYS_EIC(x)	__REG2(0xa0900214, (x))
-
-/* External Interrupt x Control register: Status */
-#define SYS_EIC_STS		__REGBIT(3)
-
-/* External Interrupt x Control register: Clear */
-#define SYS_EIC_CLR		__REGBIT(2)
-
-/* External Interrupt x Control register: Polarity */
-#define SYS_EIC_PLTY		__REGBIT(1)
-#define SYS_EIC_PLTY_AH			__REGVAL(SYS_EIC_PLTY, 0)
-#define SYS_EIC_PLTY_AL			__REGVAL(SYS_EIC_PLTY, 1)
-
-/* External Interrupt x Control register: Level edge */
-#define SYS_EIC_LVEDG		__REGBIT(0)
-#define SYS_EIC_LVEDG_LEVEL		__REGVAL(SYS_EIC_LVEDG, 0)
-#define SYS_EIC_LVEDG_EDGE		__REGVAL(SYS_EIC_LVEDG, 1)
-
-#endif /* ifndef __ASM_ARCH_REGSSYSNS9360_H */
diff --git a/include/asm-arm/arch-ns9xxx/system.h b/include/asm-arm/arch-ns9xxx/system.h
deleted file mode 100644
index c294168..0000000
--- a/include/asm-arm/arch-ns9xxx/system.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/system.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-#include <asm/arch/processor.h>
-#include <asm/arch/processor-ns9360.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-#ifdef CONFIG_PROCESSOR_NS9360
-	if (processor_is_ns9360())
-		ns9360_reset(mode);
-	else
-#endif
-		BUG();
-
-	BUG();
-}
-
-#endif /* ifndef __ASM_ARCH_SYSTEM_H */
diff --git a/include/asm-arm/arch-ns9xxx/timex.h b/include/asm-arm/arch-ns9xxx/timex.h
deleted file mode 100644
index f776cbd..0000000
--- a/include/asm-arm/arch-ns9xxx/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/timex.h
- *
- * Copyright (C) 2005-2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/*
- * value for CLOCK_TICK_RATE stolen from include/asm-arm/arch-s3c2410/timex.h.
- * See there for an explanation.
- */
-#define CLOCK_TICK_RATE         12000000
-
-#endif /* ifndef __ASM_ARCH_TIMEX_H */
diff --git a/include/asm-arm/arch-ns9xxx/uncompress.h b/include/asm-arm/arch-ns9xxx/uncompress.h
deleted file mode 100644
index 71066bac..0000000
--- a/include/asm-arm/arch-ns9xxx/uncompress.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/uncompress.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/io.h>
-
-#define __REG(x)	((void __iomem __force *)(x))
-
-static void putc_dummy(char c, void __iomem *base)
-{
-	/* nothing */
-}
-
-static void putc_ns9360(char c, void __iomem *base)
-{
-	static int t = 0x10000;
-	do {
-		if (t)
-			--t;
-
-		if (__raw_readl(base + 8) & (1 << 3)) {
-			__raw_writeb(c, base + 16);
-			t = 0x10000;
-			break;
-		}
-	} while (t);
-}
-
-static void putc_a9m9750dev(char c, void __iomem *base)
-{
-	static int t = 0x10000;
-	do {
-		if (t)
-			--t;
-
-		if (__raw_readb(base + 5) & (1 << 5)) {
-			__raw_writeb(c, base);
-			t = 0x10000;
-			break;
-		}
-	} while (t);
-
-}
-
-static void putc_ns921x(char c, void __iomem *base)
-{
-	static int t = 0x10000;
-	do {
-		if (t)
-			--t;
-
-		if (!(__raw_readl(base) & (1 << 11))) {
-			__raw_writeb(c, base + 0x0028);
-			t = 0x10000;
-			break;
-		}
-	} while (t);
-}
-
-#define MSCS __REG(0xA0900184)
-
-#define NS9360_UARTA	__REG(0x90200040)
-#define NS9360_UARTB	__REG(0x90200000)
-#define NS9360_UARTC	__REG(0x90300000)
-#define NS9360_UARTD	__REG(0x90300040)
-
-#define NS9360_UART_ENABLED(base)					\
-		(__raw_readl(NS9360_UARTA) & (1 << 31))
-
-#define A9M9750DEV_UARTA	__REG(0x40000000)
-
-#define NS921XSYS_CLOCK	__REG(0xa090017c)
-#define NS921X_UARTA	__REG(0x90010000)
-#define NS921X_UARTB	__REG(0x90018000)
-#define NS921X_UARTC	__REG(0x90020000)
-#define NS921X_UARTD	__REG(0x90028000)
-
-#define NS921X_UART_ENABLED(base)					\
-		(__raw_readl((base) + 0x1000) & (1 << 29))
-
-static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base)
-{
-	if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) {
-		/* ns9360 or ns9750 */
-		if (NS9360_UART_ENABLED(NS9360_UARTA)) {
-			*putc = putc_ns9360;
-			*base = NS9360_UARTA;
-			return;
-		} else if (NS9360_UART_ENABLED(NS9360_UARTB)) {
-			*putc = putc_ns9360;
-			*base = NS9360_UARTB;
-			return;
-		} else if (NS9360_UART_ENABLED(NS9360_UARTC)) {
-			*putc = putc_ns9360;
-			*base = NS9360_UARTC;
-			return;
-		} else if (NS9360_UART_ENABLED(NS9360_UARTD)) {
-			*putc = putc_ns9360;
-			*base = NS9360_UARTD;
-			return;
-		} else if (__raw_readl(__REG(0xa09001f4)) == 0xfffff001) {
-			*putc = putc_a9m9750dev;
-			*base = A9M9750DEV_UARTA;
-			return;
-		}
-	} else if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x02) {
-		/* ns921x */
-		u32 clock = __raw_readl(NS921XSYS_CLOCK);
-
-		if ((clock & (1 << 1)) &&
-				NS921X_UART_ENABLED(NS921X_UARTA)) {
-			*putc = putc_ns921x;
-			*base = NS921X_UARTA;
-			return;
-		} else if ((clock & (1 << 2)) &&
-				NS921X_UART_ENABLED(NS921X_UARTB)) {
-			*putc = putc_ns921x;
-			*base = NS921X_UARTB;
-			return;
-		} else if ((clock & (1 << 3)) &&
-				NS921X_UART_ENABLED(NS921X_UARTC)) {
-			*putc = putc_ns921x;
-			*base = NS921X_UARTC;
-			return;
-		} else if ((clock & (1 << 4)) &&
-				NS921X_UART_ENABLED(NS921X_UARTD)) {
-			*putc = putc_ns921x;
-			*base = NS921X_UARTD;
-			return;
-		}
-	}
-
-	*putc = putc_dummy;
-}
-
-void (*myputc)(char, void __iomem *);
-void __iomem *base;
-
-static void putc(char c)
-{
-	myputc(c, base);
-}
-
-static void arch_decomp_setup(void)
-{
-	autodetect(&myputc, &base);
-}
-#define arch_decomp_wdog()
-
-static void flush(void)
-{
-	/* nothing */
-}
-
-#endif /* ifndef __ASM_ARCH_UNCOMPRESS_H */
diff --git a/include/asm-arm/arch-ns9xxx/vmalloc.h b/include/asm-arm/arch-ns9xxx/vmalloc.h
deleted file mode 100644
index 2f3cb6f..0000000
--- a/include/asm-arm/arch-ns9xxx/vmalloc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/vmalloc.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END     (0xf0000000)
-
-#endif /* ifndef __ASM_ARCH_VMALLOC_H */
diff --git a/include/asm-arm/arch-omap/aic23.h b/include/asm-arm/arch-omap/aic23.h
deleted file mode 100644
index aec2d65..0000000
--- a/include/asm-arm/arch-omap/aic23.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/aic23.h
- *
- * Hardware definitions for TI TLV320AIC23 audio codec
- *
- * Copyright (C) 2002 RidgeRun, Inc.
- * Author: Steve Johnson
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_AIC23_H
-#define __ASM_ARCH_AIC23_H
-
-// Codec TLV320AIC23
-#define LEFT_LINE_VOLUME_ADDR		0x00
-#define RIGHT_LINE_VOLUME_ADDR		0x01
-#define LEFT_CHANNEL_VOLUME_ADDR	0x02
-#define RIGHT_CHANNEL_VOLUME_ADDR	0x03
-#define ANALOG_AUDIO_CONTROL_ADDR	0x04
-#define DIGITAL_AUDIO_CONTROL_ADDR	0x05
-#define POWER_DOWN_CONTROL_ADDR		0x06
-#define DIGITAL_AUDIO_FORMAT_ADDR	0x07
-#define SAMPLE_RATE_CONTROL_ADDR	0x08
-#define DIGITAL_INTERFACE_ACT_ADDR	0x09
-#define RESET_CONTROL_ADDR		0x0F
-
-// Left (right) line input volume control register
-#define LRS_ENABLED			0x0100
-#define LIM_MUTED			0x0080
-#define LIV_DEFAULT			0x0017
-#define LIV_MAX				0x001f
-#define LIV_MIN				0x0000
-
-// Left (right) channel headphone volume control register
-#define LZC_ON				0x0080
-#define LHV_DEFAULT			0x0079
-#define LHV_MAX				0x007f
-#define LHV_MIN				0x0000
-
-// Analog audio path control register
-#define STA_REG(x)			((x)<<6)
-#define STE_ENABLED			0x0020
-#define DAC_SELECTED			0x0010
-#define BYPASS_ON			0x0008
-#define INSEL_MIC			0x0004
-#define MICM_MUTED			0x0002
-#define MICB_20DB			0x0001
-
-// Digital audio path control register
-#define DACM_MUTE			0x0008
-#define DEEMP_32K			0x0002
-#define DEEMP_44K			0x0004
-#define DEEMP_48K			0x0006
-#define ADCHP_ON			0x0001
-
-// Power control down register
-#define DEVICE_POWER_OFF	  	0x0080
-#define CLK_OFF				0x0040
-#define OSC_OFF				0x0020
-#define OUT_OFF				0x0010
-#define DAC_OFF				0x0008
-#define ADC_OFF				0x0004
-#define MIC_OFF				0x0002
-#define LINE_OFF			0x0001
-
-// Digital audio interface register
-#define MS_MASTER			0x0040
-#define LRSWAP_ON			0x0020
-#define LRP_ON				0x0010
-#define IWL_16				0x0000
-#define IWL_20				0x0004
-#define IWL_24				0x0008
-#define IWL_32				0x000C
-#define FOR_I2S				0x0002
-#define FOR_DSP				0x0003
-
-// Sample rate control register
-#define CLKOUT_HALF			0x0080
-#define CLKIN_HALF			0x0040
-#define BOSR_384fs			0x0002 // BOSR_272fs when in USB mode
-#define USB_CLK_ON			0x0001
-#define SR_MASK                         0xf
-#define CLKOUT_SHIFT                    7
-#define CLKIN_SHIFT                     6
-#define SR_SHIFT                        2
-#define BOSR_SHIFT                      1
-
-// Digital interface register
-#define ACT_ON				0x0001
-
-#define TLV320AIC23ID1                  (0x1a)	// cs low
-#define TLV320AIC23ID2                  (0x1b)	// cs high
-
-void aic23_power_up(void);
-void aic23_power_down(void);
-
-#endif /* __ASM_ARCH_AIC23_H */
diff --git a/include/asm-arm/arch-omap/board-2430sdp.h b/include/asm-arm/arch-omap/board-2430sdp.h
deleted file mode 100644
index c7db900..0000000
--- a/include/asm-arm/arch-omap/board-2430sdp.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-2430sdp.h
- *
- * Hardware definitions for TI OMAP2430 SDP board.
- *
- * Based on board-h4.h by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_2430SDP_H
-#define __ASM_ARCH_OMAP_2430SDP_H
-
-/* Placeholder for 2430SDP specific defines */
-#define OMAP24XX_ETHR_START		 0x08000300
-#define OMAP24XX_ETHR_GPIO_IRQ		149
-#define SDP2430_CS0_BASE		0x04000000
-
-#define TWL4030_IRQNUM			INT_24XX_SYS_NIRQ
-
-#endif /* __ASM_ARCH_OMAP_2430SDP_H */
diff --git a/include/asm-arm/arch-omap/board-ams-delta.h b/include/asm-arm/arch-omap/board-ams-delta.h
deleted file mode 100644
index 9aee15d..0000000
--- a/include/asm-arm/arch-omap/board-ams-delta.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-ams-delta.h
- *
- * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H
-#define __ASM_ARCH_OMAP_AMS_DELTA_H
-
-#if defined (CONFIG_MACH_AMS_DELTA)
-
-#define AMS_DELTA_LATCH1_PHYS		0x01000000
-#define AMS_DELTA_LATCH1_VIRT		0xEA000000
-#define AMS_DELTA_MODEM_PHYS		0x04000000
-#define AMS_DELTA_MODEM_VIRT		0xEB000000
-#define AMS_DELTA_LATCH2_PHYS		0x08000000
-#define AMS_DELTA_LATCH2_VIRT		0xEC000000
-
-#define AMS_DELTA_LATCH1_LED_CAMERA	0x01
-#define AMS_DELTA_LATCH1_LED_ADVERT	0x02
-#define AMS_DELTA_LATCH1_LED_EMAIL	0x04
-#define AMS_DELTA_LATCH1_LED_HANDSFREE	0x08
-#define AMS_DELTA_LATCH1_LED_VOICEMAIL	0x10
-#define AMS_DELTA_LATCH1_LED_VOICE	0x20
-
-#define AMS_DELTA_LATCH2_LCD_VBLEN	0x0001
-#define AMS_DELTA_LATCH2_LCD_NDISP	0x0002
-#define AMS_DELTA_LATCH2_NAND_NCE	0x0004
-#define AMS_DELTA_LATCH2_NAND_NRE	0x0008
-#define AMS_DELTA_LATCH2_NAND_NWP	0x0010
-#define AMS_DELTA_LATCH2_NAND_NWE	0x0020
-#define AMS_DELTA_LATCH2_NAND_ALE	0x0040
-#define AMS_DELTA_LATCH2_NAND_CLE	0x0080
-#define AMD_DELTA_LATCH2_KEYBRD_PWR	0x0100
-#define AMD_DELTA_LATCH2_KEYBRD_DATA	0x0200
-#define AMD_DELTA_LATCH2_SCARD_RSTIN	0x0400
-#define AMD_DELTA_LATCH2_SCARD_CMDVCC	0x0800
-#define AMS_DELTA_LATCH2_MODEM_NRESET	0x1000
-#define AMS_DELTA_LATCH2_MODEM_CODEC	0x2000
-
-#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA	0
-#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK	1
-#define AMS_DELTA_GPIO_PIN_MODEM_IRQ	2
-#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH	4
-#define AMS_DELTA_GPIO_PIN_SCARD_NOFF	6
-#define AMS_DELTA_GPIO_PIN_SCARD_IO	7
-#define AMS_DELTA_GPIO_PIN_CONFIG	11
-#define AMS_DELTA_GPIO_PIN_NAND_RB	12
-
-#ifndef __ASSEMBLY__
-void ams_delta_latch1_write(u8 mask, u8 value);
-void ams_delta_latch2_write(u16 mask, u16 value);
-#endif
-
-#endif /* CONFIG_MACH_AMS_DELTA */
-
-#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */
diff --git a/include/asm-arm/arch-omap/board-apollon.h b/include/asm-arm/arch-omap/board-apollon.h
deleted file mode 100644
index 547125a..0000000
--- a/include/asm-arm/arch-omap/board-apollon.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-apollon.h
- *
- * Hardware definitions for Samsung OMAP24XX Apollon board.
- *
- * Initial creation by Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_APOLLON_H
-#define __ASM_ARCH_OMAP_APOLLON_H
-
-extern void apollon_mmc_init(void);
-
-/* Placeholder for APOLLON specific defines */
-#define APOLLON_ETHR_GPIO_IRQ		74
-
-#endif /*  __ASM_ARCH_OMAP_APOLLON_H */
-
diff --git a/include/asm-arm/arch-omap/board-fsample.h b/include/asm-arm/arch-omap/board-fsample.h
deleted file mode 100644
index 89a1e52..0000000
--- a/include/asm-arm/arch-omap/board-fsample.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-fsample.h
- *
- * Board-specific goodies for TI F-Sample.
- *
- * Copyright (C) 2006 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_FSAMPLE_H
-#define __ASM_ARCH_OMAP_FSAMPLE_H
-
-/* fsample is pretty close to p2-sample */
-#include <asm/arch/board-perseus2.h>
-
-#define fsample_cpld_read(reg) __raw_readb(reg)
-#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
-
-#define FSAMPLE_CPLD_BASE    0xE8100000
-#define FSAMPLE_CPLD_SIZE    SZ_4K
-#define FSAMPLE_CPLD_START   0x05080000
-
-#define FSAMPLE_CPLD_REG_A   (FSAMPLE_CPLD_BASE + 0x00)
-#define FSAMPLE_CPLD_SWITCH  (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_UART    (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_REG_B   (FSAMPLE_CPLD_BASE + 0x04)
-#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
-#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
-
-#define FSAMPLE_CPLD_BIT_BT_RESET         0
-#define FSAMPLE_CPLD_BIT_LCD_RESET        1
-#define FSAMPLE_CPLD_BIT_CAM_PWDN         2
-#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE   3
-#define FSAMPLE_CPLD_BIT_SD_MMC_EN        4
-#define FSAMPLE_CPLD_BIT_aGPS_PWREN       5
-#define FSAMPLE_CPLD_BIT_BACKLIGHT        6
-#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET    7
-#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N    8
-#define FSAMPLE_CPLD_BIT_OTG_RESET        9
-
-#define fsample_cpld_set(bit) \
-    fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
-
-#define fsample_cpld_clear(bit) \
-    fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
-
-#endif
diff --git a/include/asm-arm/arch-omap/board-h2.h b/include/asm-arm/arch-omap/board-h2.h
deleted file mode 100644
index c322796..0000000
--- a/include/asm-arm/arch-omap/board-h2.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-h2.h
- *
- * Hardware definitions for TI OMAP1610 H2 board.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_H2_H
-#define __ASM_ARCH_OMAP_H2_H
-
-/* Placeholder for H2 specific defines */
-
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define OMAP1610_ETHR_START		0x04000300
-
-extern void h2_mmc_init(void);
-extern void h2_mmc_slot_cover_handler(void *arg, int state);
-
-#endif /*  __ASM_ARCH_OMAP_H2_H */
-
diff --git a/include/asm-arm/arch-omap/board-h3.h b/include/asm-arm/arch-omap/board-h3.h
deleted file mode 100644
index c5d0f32..0000000
--- a/include/asm-arm/arch-omap/board-h3.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-h3.h
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_H3_H
-#define __ASM_ARCH_OMAP_H3_H
-
-/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
-#define OMAP1710_ETHR_START		0x04000300
-
-extern void h3_mmc_init(void);
-extern void h3_mmc_slot_cover_handler(void *arg, int state);
-
-#endif /*  __ASM_ARCH_OMAP_H3_H */
diff --git a/include/asm-arm/arch-omap/board-h4.h b/include/asm-arm/arch-omap/board-h4.h
deleted file mode 100644
index 7e0efef..0000000
--- a/include/asm-arm/arch-omap/board-h4.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-h4.h
- *
- * Hardware definitions for TI OMAP1610 H4 board.
- *
- * Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_H4_H
-#define __ASM_ARCH_OMAP_H4_H
-
-/* Placeholder for H4 specific defines */
-#define OMAP24XX_ETHR_GPIO_IRQ		92
-#endif /*  __ASM_ARCH_OMAP_H4_H */
-
diff --git a/include/asm-arm/arch-omap/board-innovator.h b/include/asm-arm/arch-omap/board-innovator.h
deleted file mode 100644
index 9ca03de..0000000
--- a/include/asm-arm/arch-omap/board-innovator.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-innovator.h
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_INNOVATOR_H
-#define __ASM_ARCH_OMAP_INNOVATOR_H
-
-#if defined (CONFIG_ARCH_OMAP15XX)
-
-#ifndef OMAP_SDRAM_DEVICE
-#define OMAP_SDRAM_DEVICE			D256M_1X16_4B
-#endif
-
-#define OMAP1510P1_IMIF_PRI_VALUE		0x00
-#define OMAP1510P1_EMIFS_PRI_VALUE		0x00
-#define OMAP1510P1_EMIFF_PRI_VALUE		0x00
-
-#ifndef __ASSEMBLY__
-void fpga_write(unsigned char val, int reg);
-unsigned char fpga_read(int reg);
-#endif
-
-#endif /* CONFIG_ARCH_OMAP15XX */
-
-#if defined (CONFIG_ARCH_OMAP16XX)
-
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define INNOVATOR1610_ETHR_START	0x04000300
-
-#endif /* CONFIG_ARCH_OMAP1610 */
-#endif /* __ASM_ARCH_OMAP_INNOVATOR_H */
diff --git a/include/asm-arm/arch-omap/board-nokia.h b/include/asm-arm/arch-omap/board-nokia.h
deleted file mode 100644
index 72deea2..0000000
--- a/include/asm-arm/arch-omap/board-nokia.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/board-nokia.h
- *
- *  Information structures for Nokia-specific board config data
- *
- *  Copyright (C) 2005	Nokia Corporation
- */
-
-#ifndef _OMAP_BOARD_NOKIA_H
-#define _OMAP_BOARD_NOKIA_H
-
-#include <linux/types.h>
-
-#define OMAP_TAG_NOKIA_BT	0x4e01
-#define OMAP_TAG_WLAN_CX3110X	0x4e02
-#define OMAP_TAG_CBUS		0x4e03
-#define OMAP_TAG_EM_ASIC_BB5	0x4e04
-
-
-#define BT_CHIP_CSR		1
-#define BT_CHIP_TI		2
-
-#define BT_SYSCLK_12		1
-#define BT_SYSCLK_38_4		2
-
-struct omap_bluetooth_config {
-	u8    chip_type;
-	u8    bt_wakeup_gpio;
-	u8    host_wakeup_gpio;
-	u8    reset_gpio;
-	u8    bt_uart;
-	u8    bd_addr[6];
-	u8    bt_sysclk;
-};
-
-struct omap_wlan_cx3110x_config {
-	u8  chip_type;
-	s16 power_gpio;
-	s16 irq_gpio;
-	s16 spi_cs_gpio;
-};
-
-struct omap_cbus_config {
-	s16 clk_gpio;
-	s16 dat_gpio;
-	s16 sel_gpio;
-};
-
-struct omap_em_asic_bb5_config {
-	s16 retu_irq_gpio;
-	s16 tahvo_irq_gpio;
-};
-
-#endif
diff --git a/include/asm-arm/arch-omap/board-osk.h b/include/asm-arm/arch-omap/board-osk.h
deleted file mode 100644
index 9492609..0000000
--- a/include/asm-arm/arch-omap/board-osk.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-osk.h
- *
- * Hardware definitions for TI OMAP5912 OSK board.
- *
- * Written by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_OSK_H
-#define __ASM_ARCH_OMAP_OSK_H
-
-/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
-#define OMAP_OSK_ETHR_START		0x04800300
-
-/* TPS65010 has four GPIOs.  nPG and LED2 can be treated like GPIOs with
- * alternate pin configurations for hardware-controlled blinking.
- */
-#define OSK_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
-#	define OSK_TPS_GPIO_USB_PWR_EN	(OSK_TPS_GPIO_BASE + 0)
-#	define OSK_TPS_GPIO_LED_D3	(OSK_TPS_GPIO_BASE + 1)
-#	define OSK_TPS_GPIO_LAN_RESET	(OSK_TPS_GPIO_BASE + 2)
-#	define OSK_TPS_GPIO_DSP_PWR_EN	(OSK_TPS_GPIO_BASE + 3)
-#	define OSK_TPS_GPIO_LED_D9	(OSK_TPS_GPIO_BASE + 4)
-#	define OSK_TPS_GPIO_LED_D2	(OSK_TPS_GPIO_BASE + 5)
-
-#endif /*  __ASM_ARCH_OMAP_OSK_H */
-
diff --git a/include/asm-arm/arch-omap/board-palmte.h b/include/asm-arm/arch-omap/board-palmte.h
deleted file mode 100644
index 6fac2c8..0000000
--- a/include/asm-arm/arch-omap/board-palmte.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-palmte.h
- *
- * Hardware definitions for the Palm Tungsten E device.
- *
- * Maintainters :	http://palmtelinux.sf.net
- *			palmtelinux-developpers@lists.sf.net
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_BOARD_PALMTE_H
-#define __OMAP_BOARD_PALMTE_H
-
-#define PALMTE_USBDETECT_GPIO	0
-#define PALMTE_USB_OR_DC_GPIO	1
-#define PALMTE_TSC_GPIO		4
-#define PALMTE_PINTDAV_GPIO	6
-#define PALMTE_MMC_WP_GPIO	8
-#define PALMTE_MMC_POWER_GPIO	9
-#define PALMTE_HDQ_GPIO		11
-#define PALMTE_HEADPHONES_GPIO	14
-#define PALMTE_SPEAKER_GPIO	15
-#define PALMTE_DC_GPIO		OMAP_MPUIO(2)
-#define PALMTE_MMC_SWITCH_GPIO	OMAP_MPUIO(4)
-#define PALMTE_MMC1_GPIO	OMAP_MPUIO(6)
-#define PALMTE_MMC2_GPIO	OMAP_MPUIO(7)
-#define PALMTE_MMC3_GPIO	OMAP_MPUIO(11)
-
-#endif	/* __OMAP_BOARD_PALMTE_H */
diff --git a/include/asm-arm/arch-omap/board-palmtt.h b/include/asm-arm/arch-omap/board-palmtt.h
deleted file mode 100644
index d9590b0..0000000
--- a/include/asm-arm/arch-omap/board-palmtt.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-palmte.h
- *
- * Hardware definitions for the Palm Tungsten|T device.
- *
- * Maintainters :	Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_BOARD_PALMTT_H
-#define __OMAP_BOARD_PALMTT_H
-
-#define PALMTT_USBDETECT_GPIO	0
-#define PALMTT_CABLE_GPIO	1
-#define PALMTT_LED_GPIO		3
-#define PALMTT_PENIRQ_GPIO	6
-#define PALMTT_MMC_WP_GPIO	8
-#define PALMTT_HDQ_GPIO		11
-
-#endif	/* __OMAP_BOARD_PALMTT_H */
diff --git a/include/asm-arm/arch-omap/board-palmz71.h b/include/asm-arm/arch-omap/board-palmz71.h
deleted file mode 100644
index 1252a85..0000000
--- a/include/asm-arm/arch-omap/board-palmz71.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-palmz71.h
- *
- * Hardware definitions for the Palm Zire71 device.
- *
- * Maintainters :	Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_BOARD_PALMZ71_H
-#define __OMAP_BOARD_PALMZ71_H
-
-#define PALMZ71_USBDETECT_GPIO	0
-#define PALMZ71_PENIRQ_GPIO	6
-#define PALMZ71_MMC_WP_GPIO	8
-#define PALMZ71_HDQ_GPIO 	11
-
-#define PALMZ71_HOTSYNC_GPIO	OMAP_MPUIO(1)
-#define PALMZ71_CABLE_GPIO	OMAP_MPUIO(2)
-#define PALMZ71_SLIDER_GPIO	OMAP_MPUIO(3)
-#define PALMZ71_MMC_IN_GPIO	OMAP_MPUIO(4)
-
-#endif	/* __OMAP_BOARD_PALMZ71_H */
diff --git a/include/asm-arm/arch-omap/board-perseus2.h b/include/asm-arm/arch-omap/board-perseus2.h
deleted file mode 100644
index d7429cb..0000000
--- a/include/asm-arm/arch-omap/board-perseus2.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/board-perseus2.h
- *
- *  Copyright 2003 by Texas Instruments Incorporated
- *    OMAP730 / Perseus2 support by Jean Pihet
- *
- * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com)
- * Author: RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_PERSEUS2_H
-#define __ASM_ARCH_OMAP_PERSEUS2_H
-
-#include <asm/arch/fpga.h>
-
-#ifndef OMAP_SDRAM_DEVICE
-#define OMAP_SDRAM_DEVICE		D256M_1X16_4B
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h
deleted file mode 100644
index 99564c7..0000000
--- a/include/asm-arm/arch-omap/board.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/board.h
- *
- *  Information structures for board-specific data
- *
- *  Copyright (C) 2004	Nokia Corporation
- *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
- */
-
-#ifndef _OMAP_BOARD_H
-#define _OMAP_BOARD_H
-
-#include <linux/types.h>
-
-#include <asm/arch/gpio-switch.h>
-
-/* Different peripheral ids */
-#define OMAP_TAG_CLOCK		0x4f01
-#define OMAP_TAG_MMC		0x4f02
-#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
-#define OMAP_TAG_USB		0x4f04
-#define OMAP_TAG_LCD		0x4f05
-#define OMAP_TAG_GPIO_SWITCH	0x4f06
-#define OMAP_TAG_UART		0x4f07
-#define OMAP_TAG_FBMEM		0x4f08
-#define OMAP_TAG_STI_CONSOLE	0x4f09
-#define OMAP_TAG_CAMERA_SENSOR	0x4f0a
-
-#define OMAP_TAG_BOOT_REASON    0x4f80
-#define OMAP_TAG_FLASH_PART	0x4f81
-#define OMAP_TAG_VERSION_STR	0x4f82
-
-struct omap_clock_config {
-	/* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
-	u8 system_clock_type;
-};
-
-struct omap_mmc_conf {
-	unsigned enabled:1;
-	/* nomux means "standard" muxing is wrong on this board, and that
-	 * board-specific code handled it before common init logic.
-	 */
-	unsigned nomux:1;
-	/* switch pin can be for card detect (default) or card cover */
-	unsigned cover:1;
-	/* 4 wire signaling is optional, and is only used for SD/SDIO */
-	unsigned wire4:1;
-	s16 power_pin;
-	s16 switch_pin;
-	s16 wp_pin;
-};
-
-struct omap_mmc_config {
-	struct omap_mmc_conf mmc[2];
-};
-
-struct omap_serial_console_config {
-	u8 console_uart;
-	u32 console_speed;
-};
-
-struct omap_sti_console_config {
-	unsigned enable:1;
-	u8 channel;
-};
-
-struct omap_camera_sensor_config {
-	u16 reset_gpio;
-	int (*power_on)(void * data);
-	int (*power_off)(void * data);
-};
-
-struct omap_usb_config {
-	/* Configure drivers according to the connectors on your board:
-	 *  - "A" connector (rectagular)
-	 *	... for host/OHCI use, set "register_host".
-	 *  - "B" connector (squarish) or "Mini-B"
-	 *	... for device/gadget use, set "register_dev".
-	 *  - "Mini-AB" connector (very similar to Mini-B)
-	 *	... for OTG use as device OR host, initialize "otg"
-	 */
-	unsigned	register_host:1;
-	unsigned	register_dev:1;
-	u8		otg;	/* port number, 1-based:  usb1 == 2 */
-
-	u8		hmc_mode;
-
-	/* implicitly true if otg:  host supports remote wakeup? */
-	u8		rwc;
-
-	/* signaling pins used to talk to transceiver on usbN:
-	 *  0 == usbN unused
-	 *  2 == usb0-only, using internal transceiver
-	 *  3 == 3 wire bidirectional
-	 *  4 == 4 wire bidirectional
-	 *  6 == 6 wire unidirectional (or TLL)
-	 */
-	u8		pins[3];
-};
-
-struct omap_lcd_config {
-	char panel_name[16];
-	char ctrl_name[16];
-	s16  nreset_gpio;
-	u8   data_lines;
-};
-
-struct device;
-struct fb_info;
-struct omap_backlight_config {
-	int default_intensity;
-	int (*set_power)(struct device *dev, int state);
-	int (*check_fb)(struct fb_info *fb);
-};
-
-struct omap_fbmem_config {
-	u32 start;
-	u32 size;
-};
-
-struct omap_pwm_led_platform_data {
-	const char *name;
-	int intensity_timer;
-	int blink_timer;
-	void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
-};
-
-/* See include/asm-arm/arch-omap/gpio-switch.h for definitions */
-struct omap_gpio_switch_config {
-	char name[12];
-	u16 gpio;
-	int flags:4;
-	int type:4;
-	int key_code:24; /* Linux key code */
-};
-
-struct omap_uart_config {
-	/* Bit field of UARTs present; bit 0 --> UART1 */
-	unsigned int enabled_uarts;
-};
-
-
-struct omap_flash_part_config {
-	char part_table[0];
-};
-
-struct omap_boot_reason_config {
-	char reason_str[12];
-};
-
-struct omap_version_config {
-	char component[12];
-	char version[12];
-};
-
-
-#include <asm/arch/board-nokia.h>
-
-struct omap_board_config_entry {
-	u16 tag;
-	u16 len;
-	u8  data[0];
-};
-
-struct omap_board_config_kernel {
-	u16 tag;
-	const void *data;
-};
-
-extern const void *__omap_get_config(u16 tag, size_t len, int nr);
-
-#define omap_get_config(tag, type) \
-	((const type *) __omap_get_config((tag), sizeof(type), 0))
-#define omap_get_nr_config(tag, type, nr) \
-	((const type *) __omap_get_config((tag), sizeof(type), (nr)))
-
-extern const void *omap_get_var_config(u16 tag, size_t *len);
-
-extern struct omap_board_config_kernel *omap_board_config;
-extern int omap_board_config_size;
-
-
-/* for TI reference platforms sharing the same debug card */
-extern int debug_card_init(u32 addr, unsigned gpio);
-
-#endif
diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h
deleted file mode 100644
index 4c7b351..0000000
--- a/include/asm-arm/arch-omap/clock.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/clock.h
- *
- *  Copyright (C) 2004 - 2005 Nokia corporation
- *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_CLOCK_H
-#define __ARCH_ARM_OMAP_CLOCK_H
-
-struct module;
-struct clk;
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-
-struct clksel_rate {
-	u8			div;
-	u32			val;
-	u8			flags;
-};
-
-struct clksel {
-	struct clk		 *parent;
-	const struct clksel_rate *rates;
-};
-
-struct dpll_data {
-	void __iomem		*mult_div1_reg;
-	u32			mult_mask;
-	u32			div1_mask;
-	u16			last_rounded_m;
-	u8			last_rounded_n;
-	unsigned long		last_rounded_rate;
-	unsigned int		rate_tolerance;
-	u16			max_multiplier;
-	u8			max_divider;
-	u32			max_tolerance;
-#  if defined(CONFIG_ARCH_OMAP3)
-	u8			modes;
-	void __iomem		*control_reg;
-	u32			enable_mask;
-	u8			auto_recal_bit;
-	u8			recal_en_bit;
-	u8			recal_st_bit;
-	void __iomem		*autoidle_reg;
-	u32			autoidle_mask;
-	void __iomem		*idlest_reg;
-	u8			idlest_bit;
-#  endif
-};
-
-#endif
-
-struct clk {
-	struct list_head	node;
-	struct module		*owner;
-	const char		*name;
-	int			id;
-	struct clk		*parent;
-	unsigned long		rate;
-	__u32			flags;
-	void __iomem		*enable_reg;
-	__u8			enable_bit;
-	__s8			usecount;
-	void			(*recalc)(struct clk *);
-	int			(*set_rate)(struct clk *, unsigned long);
-	long			(*round_rate)(struct clk *, unsigned long);
-	void			(*init)(struct clk *);
-	int			(*enable)(struct clk *);
-	void			(*disable)(struct clk *);
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	u8			fixed_div;
-	void __iomem		*clksel_reg;
-	u32			clksel_mask;
-	const struct clksel	*clksel;
-	struct dpll_data	*dpll_data;
-#else
-	__u8			rate_offset;
-	__u8			src_offset;
-#endif
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-	struct dentry		*dent;	/* For visible tree hierarchy */
-#endif
-};
-
-struct cpufreq_frequency_table;
-
-struct clk_functions {
-	int		(*clk_enable)(struct clk *clk);
-	void		(*clk_disable)(struct clk *clk);
-	long		(*clk_round_rate)(struct clk *clk, unsigned long rate);
-	int		(*clk_set_rate)(struct clk *clk, unsigned long rate);
-	int		(*clk_set_parent)(struct clk *clk, struct clk *parent);
-	struct clk *	(*clk_get_parent)(struct clk *clk);
-	void		(*clk_allow_idle)(struct clk *clk);
-	void		(*clk_deny_idle)(struct clk *clk);
-	void		(*clk_disable_unused)(struct clk *clk);
-#ifdef CONFIG_CPU_FREQ
-	void		(*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
-#endif
-};
-
-extern unsigned int mpurate;
-
-extern int clk_init(struct clk_functions * custom_clocks);
-extern int clk_register(struct clk *clk);
-extern void clk_unregister(struct clk *clk);
-extern void propagate_rate(struct clk *clk);
-extern void recalculate_root_clocks(void);
-extern void followparent_recalc(struct clk * clk);
-extern void clk_allow_idle(struct clk *clk);
-extern void clk_deny_idle(struct clk *clk);
-extern int clk_get_usecount(struct clk *clk);
-extern void clk_enable_init_clocks(void);
-
-/* Clock flags */
-#define RATE_CKCTL		(1 << 0)	/* Main fixed ratio clocks */
-#define RATE_FIXED		(1 << 1)	/* Fixed clock rate */
-#define RATE_PROPAGATES		(1 << 2)	/* Program children too */
-#define VIRTUAL_CLOCK		(1 << 3)	/* Composite clock from table */
-#define ALWAYS_ENABLED		(1 << 4)	/* Clock cannot be disabled */
-#define ENABLE_REG_32BIT	(1 << 5)	/* Use 32-bit access */
-#define VIRTUAL_IO_ADDRESS	(1 << 6)	/* Clock in virtual address */
-#define CLOCK_IDLE_CONTROL	(1 << 7)
-#define CLOCK_NO_IDLE_PARENT	(1 << 8)
-#define DELAYED_APP		(1 << 9)	/* Delay application of clock */
-#define CONFIG_PARTICIPANT	(1 << 10)	/* Fundamental clock */
-#define ENABLE_ON_INIT		(1 << 11)	/* Enable upon framework init */
-#define INVERT_ENABLE           (1 << 12)       /* 0 enables, 1 disables */
-/* bits 13-20 are currently free */
-#define CLOCK_IN_OMAP310	(1 << 21)
-#define CLOCK_IN_OMAP730	(1 << 22)
-#define CLOCK_IN_OMAP1510	(1 << 23)
-#define CLOCK_IN_OMAP16XX	(1 << 24)
-#define CLOCK_IN_OMAP242X	(1 << 25)
-#define CLOCK_IN_OMAP243X	(1 << 26)
-#define CLOCK_IN_OMAP343X	(1 << 27)	/* clocks common to all 343X */
-#define PARENT_CONTROLS_CLOCK	(1 << 28)
-#define CLOCK_IN_OMAP3430ES1	(1 << 29)	/* 3430ES1 clocks only */
-#define CLOCK_IN_OMAP3430ES2	(1 << 30)	/* 3430ES2 clocks only */
-
-/* Clksel_rate flags */
-#define DEFAULT_RATE		(1 << 0)
-#define RATE_IN_242X		(1 << 1)
-#define RATE_IN_243X		(1 << 2)
-#define RATE_IN_343X		(1 << 3)	/* rates common to all 343X */
-#define RATE_IN_3430ES2		(1 << 4)	/* 3430ES2 rates only */
-
-#define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
-
-
-/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */
-#define CORE_CLK_SRC_32K		0
-#define CORE_CLK_SRC_DPLL		1
-#define CORE_CLK_SRC_DPLL_X2		2
-
-#endif
diff --git a/include/asm-arm/arch-omap/common.h b/include/asm-arm/arch-omap/common.h
deleted file mode 100644
index 8ac0307..0000000
--- a/include/asm-arm/arch-omap/common.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/common.h
- *
- * Header for code common to all OMAP machines.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
-#define __ARCH_ARM_MACH_OMAP_COMMON_H
-
-#include <linux/i2c.h>
-
-struct sys_timer;
-
-extern void omap_map_common_io(void);
-extern struct sys_timer omap_timer;
-extern void omap_serial_init(void);
-#ifdef CONFIG_I2C_OMAP
-extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
-				 struct i2c_board_info const *info,
-				 unsigned len);
-#else
-static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
-				 struct i2c_board_info const *info,
-				 unsigned len)
-{
-	return 0;
-}
-#endif
-
-/* IO bases for various OMAP processors */
-struct omap_globals {
-	void __iomem	*tap;		/* Control module ID code */
-	void __iomem	*sdrc;		/* SDRAM Controller */
-	void __iomem	*sms;		/* SDRAM Memory Scheduler */
-	void __iomem	*ctrl;		/* System Control Module */
-	void __iomem	*prm;		/* Power and Reset Management */
-	void __iomem	*cm;		/* Clock Management */
-};
-
-void omap2_set_globals_242x(void);
-void omap2_set_globals_243x(void);
-void omap2_set_globals_343x(void);
-
-/* These get called from omap2_set_globals_xxxx(), do not call these */
-void omap2_set_globals_memory(struct omap_globals *);
-void omap2_set_globals_control(struct omap_globals *);
-void omap2_set_globals_prcm(struct omap_globals *);
-
-#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/include/asm-arm/arch-omap/control.h b/include/asm-arm/arch-omap/control.h
deleted file mode 100644
index 987553e..0000000
--- a/include/asm-arm/arch-omap/control.h
+++ /dev/null
@@ -1,189 +0,0 @@
-#ifndef __ASM_ARCH_CONTROL_H
-#define __ASM_ARCH_CONTROL_H
-
-/*
- * include/asm-arm/arch-omap/control.h
- *
- * OMAP2/3 System Control Module definitions
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation.
- */
-
-#include <asm/arch/io.h>
-
-#define OMAP242X_CTRL_REGADDR(reg)					\
-	(void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
-#define OMAP243X_CTRL_REGADDR(reg)					\
-	(void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
-#define OMAP343X_CTRL_REGADDR(reg)					\
-	(void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
-
-/*
- * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
- * OMAP24XX and OMAP34XX.
- */
-
-/* Control submodule offsets */
-
-#define OMAP2_CONTROL_INTERFACE		0x000
-#define OMAP2_CONTROL_PADCONFS		0x030
-#define OMAP2_CONTROL_GENERAL		0x270
-#define OMAP343X_CONTROL_MEM_WKUP	0x600
-#define OMAP343X_CONTROL_PADCONFS_WKUP	0xa00
-#define OMAP343X_CONTROL_GENERAL_WKUP	0xa60
-
-/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
-
-#define OMAP2_CONTROL_SYSCONFIG		(OMAP2_CONTROL_INTERFACE + 0x10)
-
-/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */
-#define OMAP2_CONTROL_DEVCONF0		(OMAP2_CONTROL_GENERAL + 0x0004)
-#define OMAP2_CONTROL_MSUSPENDMUX_0	(OMAP2_CONTROL_GENERAL + 0x0020)
-#define OMAP2_CONTROL_MSUSPENDMUX_1	(OMAP2_CONTROL_GENERAL + 0x0024)
-#define OMAP2_CONTROL_MSUSPENDMUX_2	(OMAP2_CONTROL_GENERAL + 0x0028)
-#define OMAP2_CONTROL_MSUSPENDMUX_3	(OMAP2_CONTROL_GENERAL + 0x002c)
-#define OMAP2_CONTROL_MSUSPENDMUX_4	(OMAP2_CONTROL_GENERAL + 0x0030)
-#define OMAP2_CONTROL_MSUSPENDMUX_5	(OMAP2_CONTROL_GENERAL + 0x0034)
-#define OMAP2_CONTROL_SEC_CTRL		(OMAP2_CONTROL_GENERAL + 0x0040)
-#define OMAP2_CONTROL_RPUB_KEY_H_0	(OMAP2_CONTROL_GENERAL + 0x0090)
-#define OMAP2_CONTROL_RPUB_KEY_H_1	(OMAP2_CONTROL_GENERAL + 0x0094)
-#define OMAP2_CONTROL_RPUB_KEY_H_2	(OMAP2_CONTROL_GENERAL + 0x0098)
-#define OMAP2_CONTROL_RPUB_KEY_H_3	(OMAP2_CONTROL_GENERAL + 0x009c)
-
-/* 242x-only CONTROL_GENERAL register offsets */
-#define OMAP242X_CONTROL_DEVCONF	OMAP2_CONTROL_DEVCONF0 /* match TRM */
-#define OMAP242X_CONTROL_OCM_RAM_PERM	(OMAP2_CONTROL_GENERAL + 0x0068)
-
-/* 243x-only CONTROL_GENERAL register offsets */
-/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */
-#define OMAP243X_CONTROL_DEVCONF1	(OMAP2_CONTROL_GENERAL + 0x0078)
-#define OMAP243X_CONTROL_CSIRXFE	(OMAP2_CONTROL_GENERAL + 0x007c)
-#define OMAP243X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
-#define OMAP243X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
-#define OMAP243X_CONTROL_IVA2_GEMCFG	(OMAP2_CONTROL_GENERAL + 0x0198)
-
-/* 24xx-only CONTROL_GENERAL register offsets */
-#define OMAP24XX_CONTROL_DEBOBS		(OMAP2_CONTROL_GENERAL + 0x0000)
-#define OMAP24XX_CONTROL_EMU_SUPPORT	(OMAP2_CONTROL_GENERAL + 0x0008)
-#define OMAP24XX_CONTROL_SEC_TEST	(OMAP2_CONTROL_GENERAL + 0x0044)
-#define OMAP24XX_CONTROL_PSA_CTRL	(OMAP2_CONTROL_GENERAL + 0x0048)
-#define OMAP24XX_CONTROL_PSA_CMD	(OMAP2_CONTROL_GENERAL + 0x004c)
-#define OMAP24XX_CONTROL_PSA_VALUE	(OMAP2_CONTROL_GENERAL + 0x0050)
-#define OMAP24XX_CONTROL_SEC_EMU	(OMAP2_CONTROL_GENERAL + 0x0060)
-#define OMAP24XX_CONTROL_SEC_TAP	(OMAP2_CONTROL_GENERAL + 0x0064)
-#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD	(OMAP2_CONTROL_GENERAL + 0x006c)
-#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD	(OMAP2_CONTROL_GENERAL + 0x0070)
-#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD	(OMAP2_CONTROL_GENERAL + 0x0074)
-#define OMAP24XX_CONTROL_SEC_STATUS		(OMAP2_CONTROL_GENERAL + 0x0080)
-#define OMAP24XX_CONTROL_SEC_ERR_STATUS		(OMAP2_CONTROL_GENERAL + 0x0084)
-#define OMAP24XX_CONTROL_STATUS			(OMAP2_CONTROL_GENERAL + 0x0088)
-#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS	(OMAP2_CONTROL_GENERAL + 0x008c)
-#define OMAP24XX_CONTROL_RAND_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00a0)
-#define OMAP24XX_CONTROL_RAND_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00a4)
-#define OMAP24XX_CONTROL_RAND_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00a8)
-#define OMAP24XX_CONTROL_RAND_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00ac)
-#define OMAP24XX_CONTROL_CUST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00b0)
-#define OMAP24XX_CONTROL_CUST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00b4)
-#define OMAP24XX_CONTROL_TEST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00c0)
-#define OMAP24XX_CONTROL_TEST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00c4)
-#define OMAP24XX_CONTROL_TEST_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00c8)
-#define OMAP24XX_CONTROL_TEST_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00cc)
-#define OMAP24XX_CONTROL_TEST_KEY_4	(OMAP2_CONTROL_GENERAL + 0x00d0)
-#define OMAP24XX_CONTROL_TEST_KEY_5	(OMAP2_CONTROL_GENERAL + 0x00d4)
-#define OMAP24XX_CONTROL_TEST_KEY_6	(OMAP2_CONTROL_GENERAL + 0x00d8)
-#define OMAP24XX_CONTROL_TEST_KEY_7	(OMAP2_CONTROL_GENERAL + 0x00dc)
-#define OMAP24XX_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e0)
-#define OMAP24XX_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00e4)
-
-/* 34xx-only CONTROL_GENERAL register offsets */
-#define OMAP343X_CONTROL_PADCONF_OFF	(OMAP2_CONTROL_GENERAL + 0x0000)
-#define OMAP343X_CONTROL_MEM_DFTRW0	(OMAP2_CONTROL_GENERAL + 0x0008)
-#define OMAP343X_CONTROL_MEM_DFTRW1	(OMAP2_CONTROL_GENERAL + 0x000c)
-#define OMAP343X_CONTROL_DEVCONF1	(OMAP2_CONTROL_GENERAL + 0x0068)
-#define OMAP343X_CONTROL_CSIRXFE		(OMAP2_CONTROL_GENERAL + 0x006c)
-#define OMAP343X_CONTROL_SEC_STATUS		(OMAP2_CONTROL_GENERAL + 0x0070)
-#define OMAP343X_CONTROL_SEC_ERR_STATUS		(OMAP2_CONTROL_GENERAL + 0x0074)
-#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG	(OMAP2_CONTROL_GENERAL + 0x0078)
-#define OMAP343X_CONTROL_STATUS			(OMAP2_CONTROL_GENERAL + 0x0080)
-#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS	(OMAP2_CONTROL_GENERAL + 0x0084)
-#define OMAP343X_CONTROL_RPUB_KEY_H_4	(OMAP2_CONTROL_GENERAL + 0x00a0)
-#define OMAP343X_CONTROL_RAND_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00a8)
-#define OMAP343X_CONTROL_RAND_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00ac)
-#define OMAP343X_CONTROL_RAND_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00b0)
-#define OMAP343X_CONTROL_RAND_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00b4)
-#define OMAP343X_CONTROL_TEST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00c8)
-#define OMAP343X_CONTROL_TEST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00cc)
-#define OMAP343X_CONTROL_TEST_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00d0)
-#define OMAP343X_CONTROL_TEST_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00d4)
-#define OMAP343X_CONTROL_TEST_KEY_4	(OMAP2_CONTROL_GENERAL + 0x00d8)
-#define OMAP343X_CONTROL_TEST_KEY_5	(OMAP2_CONTROL_GENERAL + 0x00dc)
-#define OMAP343X_CONTROL_TEST_KEY_6	(OMAP2_CONTROL_GENERAL + 0x00e0)
-#define OMAP343X_CONTROL_TEST_KEY_7	(OMAP2_CONTROL_GENERAL + 0x00e4)
-#define OMAP343X_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e8)
-#define OMAP343X_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00ec)
-#define OMAP343X_CONTROL_TEST_KEY_10	(OMAP2_CONTROL_GENERAL + 0x00f0)
-#define OMAP343X_CONTROL_TEST_KEY_11	(OMAP2_CONTROL_GENERAL + 0x00f4)
-#define OMAP343X_CONTROL_TEST_KEY_12	(OMAP2_CONTROL_GENERAL + 0x00f8)
-#define OMAP343X_CONTROL_TEST_KEY_13	(OMAP2_CONTROL_GENERAL + 0x00fc)
-#define OMAP343X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
-#define OMAP343X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
-
-/*
- * REVISIT: This list of registers is not comprehensive - there are more
- * that should be added.
- */
-
-/*
- * Control module register bit defines - these should eventually go into
- * their own regbits file.  Some of these will be complicated, depending
- * on the device type (general-purpose, emulator, test, secure, bad, other)
- * and the security mode (secure, non-secure, don't care)
- */
-/* CONTROL_DEVCONF0 bits */
-#define OMAP24XX_USBSTANDBYCTRL		(1 << 15)
-#define OMAP2_MCBSP2_CLKS_MASK		(1 << 6)
-#define OMAP2_MCBSP1_CLKS_MASK		(1 << 2)
-
-/* CONTROL_DEVCONF1 bits */
-#define OMAP2_MCBSP5_CLKS_MASK		(1 << 4) /* > 242x */
-#define OMAP2_MCBSP4_CLKS_MASK		(1 << 2) /* > 242x */
-#define OMAP2_MCBSP3_CLKS_MASK		(1 << 0) /* > 242x */
-
-/* CONTROL_STATUS bits */
-#define OMAP2_DEVICETYPE_MASK		(0x7 << 8)
-#define OMAP2_SYSBOOT_5_MASK		(1 << 5)
-#define OMAP2_SYSBOOT_4_MASK		(1 << 4)
-#define OMAP2_SYSBOOT_3_MASK		(1 << 3)
-#define OMAP2_SYSBOOT_2_MASK		(1 << 2)
-#define OMAP2_SYSBOOT_1_MASK		(1 << 1)
-#define OMAP2_SYSBOOT_0_MASK		(1 << 0)
-
-#ifndef __ASSEMBLY__
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-extern void __iomem *omap_ctrl_base_get(void);
-extern u8 omap_ctrl_readb(u16 offset);
-extern u16 omap_ctrl_readw(u16 offset);
-extern u32 omap_ctrl_readl(u16 offset);
-extern void omap_ctrl_writeb(u8 val, u16 offset);
-extern void omap_ctrl_writew(u16 val, u16 offset);
-extern void omap_ctrl_writel(u32 val, u16 offset);
-#else
-#define omap_ctrl_base_get()		0
-#define omap_ctrl_readb(x)		0
-#define omap_ctrl_readw(x)		0
-#define omap_ctrl_readl(x)		0
-#define omap_ctrl_writeb(x, y)		WARN_ON(1)
-#define omap_ctrl_writew(x, y)		WARN_ON(1)
-#define omap_ctrl_writel(x, y)		WARN_ON(1)
-#endif
-#endif	/* __ASSEMBLY__ */
-
-#endif /* __ASM_ARCH_CONTROL_H */
-
diff --git a/include/asm-arm/arch-omap/cpu.h b/include/asm-arm/arch-omap/cpu.h
deleted file mode 100644
index 52db09f..0000000
--- a/include/asm-arm/arch-omap/cpu.h
+++ /dev/null
@@ -1,402 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/cpu.h
- *
- * OMAP cpu type detection
- *
- * Copyright (C) 2004, 2008 Nokia Corporation
- *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_OMAP_CPU_H
-#define __ASM_ARCH_OMAP_CPU_H
-
-struct omap_chip_id {
-	u8 oc;
-};
-
-#define OMAP_CHIP_INIT(x)	{ .oc = x }
-
-extern unsigned int system_rev;
-
-#define omap2_cpu_rev()		((system_rev >> 12) & 0x0f)
-
-/*
- * Test if multicore OMAP support is needed
- */
-#undef MULTI_OMAP1
-#undef MULTI_OMAP2
-#undef OMAP_NAME
-
-#ifdef CONFIG_ARCH_OMAP730
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap730
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap1510
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap16xx
-# endif
-#endif
-#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX))
-# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
-#  error "OMAP1 and OMAP2 can't be selected at the same time"
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2420
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2420
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2430
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2430
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP3430
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap3430
-# endif
-#endif
-
-/*
- * Macros to group OMAP into cpu classes.
- * These can be used in most places.
- * cpu_is_omap7xx():	True for OMAP730
- * cpu_is_omap15xx():	True for OMAP1510, OMAP5910 and OMAP310
- * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
- * cpu_is_omap24xx():	True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
- * cpu_is_omap242x():	True for OMAP2420, OMAP2422, OMAP2423
- * cpu_is_omap243x():	True for OMAP2430
- * cpu_is_omap343x():	True for OMAP3430
- */
-#define GET_OMAP_CLASS	((system_rev >> 24) & 0xff)
-
-#define IS_OMAP_CLASS(class, id)			\
-static inline int is_omap ##class (void)		\
-{							\
-	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
-}
-
-#define GET_OMAP_SUBCLASS	((system_rev >> 20) & 0x0fff)
-
-#define IS_OMAP_SUBCLASS(subclass, id)			\
-static inline int is_omap ##subclass (void)		\
-{							\
-	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
-}
-
-IS_OMAP_CLASS(7xx, 0x07)
-IS_OMAP_CLASS(15xx, 0x15)
-IS_OMAP_CLASS(16xx, 0x16)
-IS_OMAP_CLASS(24xx, 0x24)
-IS_OMAP_CLASS(34xx, 0x34)
-
-IS_OMAP_SUBCLASS(242x, 0x242)
-IS_OMAP_SUBCLASS(243x, 0x243)
-IS_OMAP_SUBCLASS(343x, 0x343)
-
-#define cpu_is_omap7xx()		0
-#define cpu_is_omap15xx()		0
-#define cpu_is_omap16xx()		0
-#define cpu_is_omap24xx()		0
-#define cpu_is_omap242x()		0
-#define cpu_is_omap243x()		0
-#define cpu_is_omap34xx()		0
-#define cpu_is_omap343x()		0
-
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-#  undef  cpu_is_omap15xx
-#  define cpu_is_omap15xx()		is_omap15xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  undef  cpu_is_omap16xx
-#  define cpu_is_omap16xx()		is_omap16xx()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-#  undef  cpu_is_omap15xx
-#  define cpu_is_omap15xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  undef  cpu_is_omap16xx
-#  define cpu_is_omap16xx()		1
-# endif
-#endif
-
-#if defined(MULTI_OMAP2)
-# if defined(CONFIG_ARCH_OMAP24XX)
-#  undef  cpu_is_omap24xx
-#  undef  cpu_is_omap242x
-#  undef  cpu_is_omap243x
-#  define cpu_is_omap24xx()		is_omap24xx()
-#  define cpu_is_omap242x()		is_omap242x()
-#  define cpu_is_omap243x()		is_omap243x()
-# endif
-# if defined(CONFIG_ARCH_OMAP34XX)
-#  undef  cpu_is_omap34xx
-#  undef  cpu_is_omap343x
-#  define cpu_is_omap34xx()		is_omap34xx()
-#  define cpu_is_omap343x()		is_omap343x()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP24XX)
-#  undef  cpu_is_omap24xx
-#  define cpu_is_omap24xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP2420)
-#  undef  cpu_is_omap242x
-#  define cpu_is_omap242x()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP2430)
-#  undef  cpu_is_omap243x
-#  define cpu_is_omap243x()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP34XX)
-#  undef  cpu_is_omap34xx
-#  define cpu_is_omap34xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP3430)
-#  undef  cpu_is_omap343x
-#  define cpu_is_omap343x()		1
-# endif
-#endif
-
-/*
- * Macros to detect individual cpu types.
- * These are only rarely needed.
- * cpu_is_omap330():	True for OMAP330
- * cpu_is_omap730():	True for OMAP730
- * cpu_is_omap1510():	True for OMAP1510
- * cpu_is_omap1610():	True for OMAP1610
- * cpu_is_omap1611():	True for OMAP1611
- * cpu_is_omap5912():	True for OMAP5912
- * cpu_is_omap1621():	True for OMAP1621
- * cpu_is_omap1710():	True for OMAP1710
- * cpu_is_omap2420():	True for OMAP2420
- * cpu_is_omap2422():	True for OMAP2422
- * cpu_is_omap2423():	True for OMAP2423
- * cpu_is_omap2430():	True for OMAP2430
- * cpu_is_omap3430():	True for OMAP3430
- */
-#define GET_OMAP_TYPE	((system_rev >> 16) & 0xffff)
-
-#define IS_OMAP_TYPE(type, id)				\
-static inline int is_omap ##type (void)			\
-{							\
-	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
-}
-
-IS_OMAP_TYPE(310, 0x0310)
-IS_OMAP_TYPE(730, 0x0730)
-IS_OMAP_TYPE(1510, 0x1510)
-IS_OMAP_TYPE(1610, 0x1610)
-IS_OMAP_TYPE(1611, 0x1611)
-IS_OMAP_TYPE(5912, 0x1611)
-IS_OMAP_TYPE(1621, 0x1621)
-IS_OMAP_TYPE(1710, 0x1710)
-IS_OMAP_TYPE(2420, 0x2420)
-IS_OMAP_TYPE(2422, 0x2422)
-IS_OMAP_TYPE(2423, 0x2423)
-IS_OMAP_TYPE(2430, 0x2430)
-IS_OMAP_TYPE(3430, 0x3430)
-
-#define cpu_is_omap310()		0
-#define cpu_is_omap730()		0
-#define cpu_is_omap1510()		0
-#define cpu_is_omap1610()		0
-#define cpu_is_omap5912()		0
-#define cpu_is_omap1611()		0
-#define cpu_is_omap1621()		0
-#define cpu_is_omap1710()		0
-#define cpu_is_omap2420()		0
-#define cpu_is_omap2422()		0
-#define cpu_is_omap2423()		0
-#define cpu_is_omap2430()		0
-#define cpu_is_omap3430()		0
-
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap730
-#  define cpu_is_omap730()		is_omap730()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap730
-#  define cpu_is_omap730()		1
-# endif
-#endif
-
-/*
- * Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 330 vs. 1510 and 1611B/5912 vs. 1710.
- */
-#if defined(CONFIG_ARCH_OMAP15XX)
-# undef  cpu_is_omap310
-# undef  cpu_is_omap1510
-# define cpu_is_omap310()		is_omap310()
-# define cpu_is_omap1510()		is_omap1510()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-# undef  cpu_is_omap1610
-# undef  cpu_is_omap1611
-# undef  cpu_is_omap5912
-# undef  cpu_is_omap1621
-# undef  cpu_is_omap1710
-# define cpu_is_omap1610()		is_omap1610()
-# define cpu_is_omap1611()		is_omap1611()
-# define cpu_is_omap5912()		is_omap5912()
-# define cpu_is_omap1621()		is_omap1621()
-# define cpu_is_omap1710()		is_omap1710()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP24XX)
-# undef  cpu_is_omap2420
-# undef  cpu_is_omap2422
-# undef  cpu_is_omap2423
-# undef  cpu_is_omap2430
-# define cpu_is_omap2420()		is_omap2420()
-# define cpu_is_omap2422()		is_omap2422()
-# define cpu_is_omap2423()		is_omap2423()
-# define cpu_is_omap2430()		is_omap2430()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP34XX)
-# undef cpu_is_omap3430
-# define cpu_is_omap3430()		is_omap3430()
-#endif
-
-/* Macros to detect if we have OMAP1 or OMAP2 */
-#define cpu_class_is_omap1()	(cpu_is_omap730() || cpu_is_omap15xx() || \
-				cpu_is_omap16xx())
-#define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx())
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-/*
- * Macros to detect silicon revision of OMAP2/3 processors.
- * is_sil_rev_greater_than:	true if passed cpu type & its rev is greater.
- * is_sil_rev_lesser_than:	true if passed cpu type & its rev is lesser.
- * is_sil_rev_equal_to:		true if passed cpu type & its rev is equal.
- * get_sil_rev:			return the silicon rev value.
- */
-#define get_sil_omap_type(rev)	((rev & 0xffff0000) >> 16)
-#define get_sil_revision(rev)	((rev & 0x0000f000) >> 12)
-
-#define is_sil_rev_greater_than(rev) \
-		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
-		(get_sil_revision(system_rev) > get_sil_revision(rev)))
-
-#define is_sil_rev_less_than(rev) \
-		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
-		(get_sil_revision(system_rev) < get_sil_revision(rev)))
-
-#define is_sil_rev_equal_to(rev) \
-		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
-		(get_sil_revision(system_rev) == get_sil_revision(rev)))
-
-#define get_sil_rev() \
-		get_sil_revision(system_rev)
-
-/* Various silicon macros defined here */
-#define OMAP2420_REV_ES1_0	0x24200000
-#define OMAP2420_REV_ES2_0	0x24201000
-#define OMAP2430_REV_ES1_0	0x24300000
-#define OMAP3430_REV_ES1_0	0x34300000
-#define OMAP3430_REV_ES2_0	0x34301000
-#define OMAP3430_REV_ES2_1	0x34302000
-#define OMAP3430_REV_ES2_2	0x34303000
-
-/*
- * omap_chip bits
- *
- * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is
- * valid on all chips of that type.  CHIP_IS_OMAP3430ES{1,2} indicates
- * something that is only valid on that particular ES revision.
- *
- * These bits may be ORed together to indicate structures that are
- * available on multiple chip types.
- *
- * To test whether a particular structure matches the current OMAP chip type,
- * use omap_chip_is().
- *
- */
-#define CHIP_IS_OMAP2420       (1 << 0)
-#define CHIP_IS_OMAP2430       (1 << 1)
-#define CHIP_IS_OMAP3430       (1 << 2)
-#define CHIP_IS_OMAP3430ES1    (1 << 3)
-#define CHIP_IS_OMAP3430ES2    (1 << 4)
-
-#define CHIP_IS_OMAP24XX       (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
-
-int omap_chip_is(struct omap_chip_id oci);
-
-
-/*
- * Macro to detect device type i.e. EMU/HS/TST/GP/BAD
- */
-#define DEVICE_TYPE_TEST	0
-#define DEVICE_TYPE_EMU		1
-#define DEVICE_TYPE_SEC		2
-#define DEVICE_TYPE_GP		3
-#define DEVICE_TYPE_BAD		4
-
-#define get_device_type()	((system_rev & 0x700) >> 8)
-#define is_device_type_test()	(get_device_type() == DEVICE_TYPE_TEST)
-#define is_device_type_emu()	(get_device_type() == DEVICE_TYPE_EMU)
-#define is_device_type_sec()	(get_device_type() == DEVICE_TYPE_SEC)
-#define is_device_type_gp()	(get_device_type() == DEVICE_TYPE_GP)
-#define is_device_type_bad()	(get_device_type() == DEVICE_TYPE_BAD)
-
-void omap2_check_revision(void);
-
-#endif    /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
-
-#endif
diff --git a/include/asm-arm/arch-omap/debug-macro.S b/include/asm-arm/arch-omap/debug-macro.S
deleted file mode 100644
index ca4f577..0000000
--- a/include/asm-arm/arch-omap/debug-macro.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/* linux/include/asm-arm/arch-omap/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-#ifdef CONFIG_ARCH_OMAP1
-		moveq	\rx, #0xff000000	@ physical base address
-		movne	\rx, #0xfe000000	@ virtual base
-		orr	\rx, \rx, #0x00fb0000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-		orr	\rx, \rx, #0x00009000	@ UART 3
-#endif
-#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
-		orr	\rx, \rx, #0x00000800	@ UART 2 & 3
-#endif
-
-#elif  CONFIG_ARCH_OMAP2
-		moveq	\rx, #0x48000000	@ physical base address
-		movne	\rx, #0xd8000000	@ virtual base
-		orr	\rx, \rx, #0x0006a000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART2
-		add	\rx, \rx, #0x00002000	@ UART 2
-#endif
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-		add	\rx, \rx, #0x00004000	@ UART 3
-#endif
-#endif
-		.endm
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx]
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldrb	\rd, [\rx, #(0x5 << 2)]	@ OMAP-1510 and friends
-		and	\rd, \rd, #0x60
-		teq	\rd, #0x60
-		beq	1002f
-		ldrb	\rd, [\rx, #(0x5 << 0)]	@ OMAP-730 only
-		and	\rd, \rd, #0x60
-		teq	\rd, #0x60
-		bne	1001b
-1002:
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h
deleted file mode 100644
index f4dcb95..0000000
--- a/include/asm-arm/arch-omap/dma.h
+++ /dev/null
@@ -1,570 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/dma.h
- *
- *  Copyright (C) 2003 Nokia Corporation
- *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* Hardware registers for omap1 */
-#define OMAP1_DMA_BASE			(0xfffed800)
-
-#define OMAP1_DMA_GCR			0x400
-#define OMAP1_DMA_GSCR			0x404
-#define OMAP1_DMA_GRST			0x408
-#define OMAP1_DMA_HW_ID			0x442
-#define OMAP1_DMA_PCH2_ID		0x444
-#define OMAP1_DMA_PCH0_ID		0x446
-#define OMAP1_DMA_PCH1_ID		0x448
-#define OMAP1_DMA_PCHG_ID		0x44a
-#define OMAP1_DMA_PCHD_ID		0x44c
-#define OMAP1_DMA_CAPS_0_U		0x44e
-#define OMAP1_DMA_CAPS_0_L		0x450
-#define OMAP1_DMA_CAPS_1_U		0x452
-#define OMAP1_DMA_CAPS_1_L		0x454
-#define OMAP1_DMA_CAPS_2		0x456
-#define OMAP1_DMA_CAPS_3		0x458
-#define OMAP1_DMA_CAPS_4		0x45a
-#define OMAP1_DMA_PCH2_SR		0x460
-#define OMAP1_DMA_PCH0_SR		0x480
-#define OMAP1_DMA_PCH1_SR		0x482
-#define OMAP1_DMA_PCHD_SR		0x4c0
-
-/* Hardware registers for omap2 and omap3 */
-#define OMAP24XX_DMA4_BASE		(L4_24XX_BASE + 0x56000)
-#define OMAP34XX_DMA4_BASE		(L4_34XX_BASE + 0x56000)
-
-#define OMAP_DMA4_REVISION		0x00
-#define OMAP_DMA4_GCR			0x78
-#define OMAP_DMA4_IRQSTATUS_L0		0x08
-#define OMAP_DMA4_IRQSTATUS_L1		0x0c
-#define OMAP_DMA4_IRQSTATUS_L2		0x10
-#define OMAP_DMA4_IRQSTATUS_L3		0x14
-#define OMAP_DMA4_IRQENABLE_L0		0x18
-#define OMAP_DMA4_IRQENABLE_L1		0x1c
-#define OMAP_DMA4_IRQENABLE_L2		0x20
-#define OMAP_DMA4_IRQENABLE_L3		0x24
-#define OMAP_DMA4_SYSSTATUS		0x28
-#define OMAP_DMA4_OCP_SYSCONFIG		0x2c
-#define OMAP_DMA4_CAPS_0		0x64
-#define OMAP_DMA4_CAPS_2		0x6c
-#define OMAP_DMA4_CAPS_3		0x70
-#define OMAP_DMA4_CAPS_4		0x74
-
-#define OMAP1_LOGICAL_DMA_CH_COUNT	17
-#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT	32	/* REVISIT: Is this 32 + 2? */
-
-/* Common channel specific registers for omap1 */
-#define OMAP1_DMA_CH_BASE(n)		(0x40 * (n) + 0x00)
-#define OMAP1_DMA_CSDP(n)		(0x40 * (n) + 0x00)
-#define OMAP1_DMA_CCR(n)		(0x40 * (n) + 0x02)
-#define OMAP1_DMA_CICR(n)		(0x40 * (n) + 0x04)
-#define OMAP1_DMA_CSR(n)		(0x40 * (n) + 0x06)
-#define OMAP1_DMA_CEN(n)		(0x40 * (n) + 0x10)
-#define OMAP1_DMA_CFN(n)		(0x40 * (n) + 0x12)
-#define OMAP1_DMA_CSFI(n)		(0x40 * (n) + 0x14)
-#define OMAP1_DMA_CSEI(n)		(0x40 * (n) + 0x16)
-#define OMAP1_DMA_CPC(n)		(0x40 * (n) + 0x18)	/* 15xx only */
-#define OMAP1_DMA_CSAC(n)		(0x40 * (n) + 0x18)
-#define OMAP1_DMA_CDAC(n)		(0x40 * (n) + 0x1a)
-#define OMAP1_DMA_CDEI(n)		(0x40 * (n) + 0x1c)
-#define OMAP1_DMA_CDFI(n)		(0x40 * (n) + 0x1e)
-#define OMAP1_DMA_CLNK_CTRL(n)		(0x40 * (n) + 0x28)
-
-/* Common channel specific registers for omap2 */
-#define OMAP_DMA4_CH_BASE(n)		(0x60 * (n) + 0x80)
-#define OMAP_DMA4_CCR(n)		(0x60 * (n) + 0x80)
-#define OMAP_DMA4_CLNK_CTRL(n)		(0x60 * (n) + 0x84)
-#define OMAP_DMA4_CICR(n)		(0x60 * (n) + 0x88)
-#define OMAP_DMA4_CSR(n)		(0x60 * (n) + 0x8c)
-#define OMAP_DMA4_CSDP(n)		(0x60 * (n) + 0x90)
-#define OMAP_DMA4_CEN(n)		(0x60 * (n) + 0x94)
-#define OMAP_DMA4_CFN(n)		(0x60 * (n) + 0x98)
-#define OMAP_DMA4_CSEI(n)		(0x60 * (n) + 0xa4)
-#define OMAP_DMA4_CSFI(n)		(0x60 * (n) + 0xa8)
-#define OMAP_DMA4_CDEI(n)		(0x60 * (n) + 0xac)
-#define OMAP_DMA4_CDFI(n)		(0x60 * (n) + 0xb0)
-#define OMAP_DMA4_CSAC(n)		(0x60 * (n) + 0xb4)
-#define OMAP_DMA4_CDAC(n)		(0x60 * (n) + 0xb8)
-
-/* Channel specific registers only on omap1 */
-#define OMAP1_DMA_CSSA_L(n)		(0x40 * (n) + 0x08)
-#define OMAP1_DMA_CSSA_U(n)		(0x40 * (n) + 0x0a)
-#define OMAP1_DMA_CDSA_L(n)		(0x40 * (n) + 0x0c)
-#define OMAP1_DMA_CDSA_U(n)		(0x40 * (n) + 0x0e)
-#define OMAP1_DMA_COLOR_L(n)		(0x40 * (n) + 0x20)
-#define OMAP1_DMA_COLOR_U(n)		(0x40 * (n) + 0x22)
-#define OMAP1_DMA_CCR2(n)		(0x40 * (n) + 0x24)
-#define OMAP1_DMA_LCH_CTRL(n)		(0x40 * (n) + 0x2a)	/* not on 15xx */
-#define OMAP1_DMA_CCEN(n)		0
-#define OMAP1_DMA_CCFN(n)		0
-
-/* Channel specific registers only on omap2 */
-#define OMAP_DMA4_CSSA(n)		(0x60 * (n) + 0x9c)
-#define OMAP_DMA4_CDSA(n)		(0x60 * (n) + 0xa0)
-#define OMAP_DMA4_CCEN(n)		(0x60 * (n) + 0xbc)
-#define OMAP_DMA4_CCFN(n)		(0x60 * (n) + 0xc0)
-#define OMAP_DMA4_COLOR(n)		(0x60 * (n) + 0xc4)
-
-/* Dummy defines to keep multi-omap compiles happy */
-#define OMAP1_DMA_REVISION		0
-#define OMAP1_DMA_IRQSTATUS_L0		0
-#define OMAP1_DMA_IRQENABLE_L0		0
-#define OMAP1_DMA_OCP_SYSCONFIG		0
-#define OMAP_DMA4_HW_ID			0
-#define OMAP_DMA4_CAPS_0_L		0
-#define OMAP_DMA4_CAPS_0_U		0
-#define OMAP_DMA4_CAPS_1_L		0
-#define OMAP_DMA4_CAPS_1_U		0
-#define OMAP_DMA4_GSCR			0
-#define OMAP_DMA4_CPC(n)		0
-
-#define OMAP_DMA4_LCH_CTRL(n)		0
-#define OMAP_DMA4_COLOR_L(n)		0
-#define OMAP_DMA4_COLOR_U(n)		0
-#define OMAP_DMA4_CCR2(n)		0
-#define OMAP1_DMA_CSSA(n)		0
-#define OMAP1_DMA_CDSA(n)		0
-#define OMAP_DMA4_CSSA_L(n)		0
-#define OMAP_DMA4_CSSA_U(n)		0
-#define OMAP_DMA4_CDSA_L(n)		0
-#define OMAP_DMA4_CDSA_U(n)		0
-
-/*----------------------------------------------------------------------------*/
-
-/* DMA channels for omap1 */
-#define OMAP_DMA_NO_DEVICE		0
-#define OMAP_DMA_MCSI1_TX		1
-#define OMAP_DMA_MCSI1_RX		2
-#define OMAP_DMA_I2C_RX			3
-#define OMAP_DMA_I2C_TX			4
-#define OMAP_DMA_EXT_NDMA_REQ		5
-#define OMAP_DMA_EXT_NDMA_REQ2		6
-#define OMAP_DMA_UWIRE_TX		7
-#define OMAP_DMA_MCBSP1_TX		8
-#define OMAP_DMA_MCBSP1_RX		9
-#define OMAP_DMA_MCBSP3_TX		10
-#define OMAP_DMA_MCBSP3_RX		11
-#define OMAP_DMA_UART1_TX		12
-#define OMAP_DMA_UART1_RX		13
-#define OMAP_DMA_UART2_TX		14
-#define OMAP_DMA_UART2_RX		15
-#define OMAP_DMA_MCBSP2_TX		16
-#define OMAP_DMA_MCBSP2_RX		17
-#define OMAP_DMA_UART3_TX		18
-#define OMAP_DMA_UART3_RX		19
-#define OMAP_DMA_CAMERA_IF_RX		20
-#define OMAP_DMA_MMC_TX			21
-#define OMAP_DMA_MMC_RX			22
-#define OMAP_DMA_NAND			23
-#define OMAP_DMA_IRQ_LCD_LINE		24
-#define OMAP_DMA_MEMORY_STICK		25
-#define OMAP_DMA_USB_W2FC_RX0		26
-#define OMAP_DMA_USB_W2FC_RX1		27
-#define OMAP_DMA_USB_W2FC_RX2		28
-#define OMAP_DMA_USB_W2FC_TX0		29
-#define OMAP_DMA_USB_W2FC_TX1		30
-#define OMAP_DMA_USB_W2FC_TX2		31
-
-/* These are only for 1610 */
-#define OMAP_DMA_CRYPTO_DES_IN		32
-#define OMAP_DMA_SPI_TX			33
-#define OMAP_DMA_SPI_RX			34
-#define OMAP_DMA_CRYPTO_HASH		35
-#define OMAP_DMA_CCP_ATTN		36
-#define OMAP_DMA_CCP_FIFO_NOT_EMPTY	37
-#define OMAP_DMA_CMT_APE_TX_CHAN_0	38
-#define OMAP_DMA_CMT_APE_RV_CHAN_0	39
-#define OMAP_DMA_CMT_APE_TX_CHAN_1	40
-#define OMAP_DMA_CMT_APE_RV_CHAN_1	41
-#define OMAP_DMA_CMT_APE_TX_CHAN_2	42
-#define OMAP_DMA_CMT_APE_RV_CHAN_2	43
-#define OMAP_DMA_CMT_APE_TX_CHAN_3	44
-#define OMAP_DMA_CMT_APE_RV_CHAN_3	45
-#define OMAP_DMA_CMT_APE_TX_CHAN_4	46
-#define OMAP_DMA_CMT_APE_RV_CHAN_4	47
-#define OMAP_DMA_CMT_APE_TX_CHAN_5	48
-#define OMAP_DMA_CMT_APE_RV_CHAN_5	49
-#define OMAP_DMA_CMT_APE_TX_CHAN_6	50
-#define OMAP_DMA_CMT_APE_RV_CHAN_6	51
-#define OMAP_DMA_CMT_APE_TX_CHAN_7	52
-#define OMAP_DMA_CMT_APE_RV_CHAN_7	53
-#define OMAP_DMA_MMC2_TX		54
-#define OMAP_DMA_MMC2_RX		55
-#define OMAP_DMA_CRYPTO_DES_OUT		56
-
-/* DMA channels for 24xx */
-#define OMAP24XX_DMA_NO_DEVICE		0
-#define OMAP24XX_DMA_XTI_DMA		1	/* S_DMA_0 */
-#define OMAP24XX_DMA_EXT_DMAREQ0	2	/* S_DMA_1 */
-#define OMAP24XX_DMA_EXT_DMAREQ1	3	/* S_DMA_2 */
-#define OMAP24XX_DMA_GPMC		4	/* S_DMA_3 */
-#define OMAP24XX_DMA_GFX		5	/* S_DMA_4 */
-#define OMAP24XX_DMA_DSS		6	/* S_DMA_5 */
-#define OMAP242X_DMA_VLYNQ_TX		7	/* S_DMA_6 */
-#define OMAP24XX_DMA_EXT_DMAREQ2	7	/* S_DMA_6 */
-#define OMAP24XX_DMA_CWT		8	/* S_DMA_7 */
-#define OMAP24XX_DMA_AES_TX		9	/* S_DMA_8 */
-#define OMAP24XX_DMA_AES_RX		10	/* S_DMA_9 */
-#define OMAP24XX_DMA_DES_TX		11	/* S_DMA_10 */
-#define OMAP24XX_DMA_DES_RX		12	/* S_DMA_11 */
-#define OMAP24XX_DMA_SHA1MD5_RX		13	/* S_DMA_12 */
-#define OMAP34XX_DMA_SHA2MD5_RX		13	/* S_DMA_12 */
-#define OMAP242X_DMA_EXT_DMAREQ2	14	/* S_DMA_13 */
-#define OMAP242X_DMA_EXT_DMAREQ3	15	/* S_DMA_14 */
-#define OMAP242X_DMA_EXT_DMAREQ4	16	/* S_DMA_15 */
-#define OMAP242X_DMA_EAC_AC_RD		17	/* S_DMA_16 */
-#define OMAP242X_DMA_EAC_AC_WR		18	/* S_DMA_17 */
-#define OMAP242X_DMA_EAC_MD_UL_RD	19	/* S_DMA_18 */
-#define OMAP242X_DMA_EAC_MD_UL_WR	20	/* S_DMA_19 */
-#define OMAP242X_DMA_EAC_MD_DL_RD	21	/* S_DMA_20 */
-#define OMAP242X_DMA_EAC_MD_DL_WR	22	/* S_DMA_21 */
-#define OMAP242X_DMA_EAC_BT_UL_RD	23	/* S_DMA_22 */
-#define OMAP242X_DMA_EAC_BT_UL_WR	24	/* S_DMA_23 */
-#define OMAP242X_DMA_EAC_BT_DL_RD	25	/* S_DMA_24 */
-#define OMAP242X_DMA_EAC_BT_DL_WR	26	/* S_DMA_25 */
-#define OMAP243X_DMA_EXT_DMAREQ3	14	/* S_DMA_13 */
-#define OMAP24XX_DMA_SPI3_TX0		15	/* S_DMA_14 */
-#define OMAP24XX_DMA_SPI3_RX0		16	/* S_DMA_15 */
-#define OMAP24XX_DMA_MCBSP3_TX		17	/* S_DMA_16 */
-#define OMAP24XX_DMA_MCBSP3_RX		18	/* S_DMA_17 */
-#define OMAP24XX_DMA_MCBSP4_TX		19	/* S_DMA_18 */
-#define OMAP24XX_DMA_MCBSP4_RX		20	/* S_DMA_19 */
-#define OMAP24XX_DMA_MCBSP5_TX		21	/* S_DMA_20 */
-#define OMAP24XX_DMA_MCBSP5_RX		22	/* S_DMA_21 */
-#define OMAP24XX_DMA_SPI3_TX1		23	/* S_DMA_22 */
-#define OMAP24XX_DMA_SPI3_RX1		24	/* S_DMA_23 */
-#define OMAP243X_DMA_EXT_DMAREQ4	25	/* S_DMA_24 */
-#define OMAP243X_DMA_EXT_DMAREQ5	26	/* S_DMA_25 */
-#define OMAP34XX_DMA_I2C3_TX		25	/* S_DMA_24 */
-#define OMAP34XX_DMA_I2C3_RX		26	/* S_DMA_25 */
-#define OMAP24XX_DMA_I2C1_TX		27	/* S_DMA_26 */
-#define OMAP24XX_DMA_I2C1_RX		28	/* S_DMA_27 */
-#define OMAP24XX_DMA_I2C2_TX		29	/* S_DMA_28 */
-#define OMAP24XX_DMA_I2C2_RX		30	/* S_DMA_29 */
-#define OMAP24XX_DMA_MCBSP1_TX		31	/* S_DMA_30 */
-#define OMAP24XX_DMA_MCBSP1_RX		32	/* S_DMA_31 */
-#define OMAP24XX_DMA_MCBSP2_TX		33	/* S_DMA_32 */
-#define OMAP24XX_DMA_MCBSP2_RX		34	/* S_DMA_33 */
-#define OMAP24XX_DMA_SPI1_TX0		35	/* S_DMA_34 */
-#define OMAP24XX_DMA_SPI1_RX0		36	/* S_DMA_35 */
-#define OMAP24XX_DMA_SPI1_TX1		37	/* S_DMA_36 */
-#define OMAP24XX_DMA_SPI1_RX1		38	/* S_DMA_37 */
-#define OMAP24XX_DMA_SPI1_TX2		39	/* S_DMA_38 */
-#define OMAP24XX_DMA_SPI1_RX2		40	/* S_DMA_39 */
-#define OMAP24XX_DMA_SPI1_TX3		41	/* S_DMA_40 */
-#define OMAP24XX_DMA_SPI1_RX3		42	/* S_DMA_41 */
-#define OMAP24XX_DMA_SPI2_TX0		43	/* S_DMA_42 */
-#define OMAP24XX_DMA_SPI2_RX0		44	/* S_DMA_43 */
-#define OMAP24XX_DMA_SPI2_TX1		45	/* S_DMA_44 */
-#define OMAP24XX_DMA_SPI2_RX1		46	/* S_DMA_45 */
-#define OMAP24XX_DMA_MMC2_TX		47	/* S_DMA_46 */
-#define OMAP24XX_DMA_MMC2_RX		48	/* S_DMA_47 */
-#define OMAP24XX_DMA_UART1_TX		49	/* S_DMA_48 */
-#define OMAP24XX_DMA_UART1_RX		50	/* S_DMA_49 */
-#define OMAP24XX_DMA_UART2_TX		51	/* S_DMA_50 */
-#define OMAP24XX_DMA_UART2_RX		52	/* S_DMA_51 */
-#define OMAP24XX_DMA_UART3_TX		53	/* S_DMA_52 */
-#define OMAP24XX_DMA_UART3_RX		54	/* S_DMA_53 */
-#define OMAP24XX_DMA_USB_W2FC_TX0	55	/* S_DMA_54 */
-#define OMAP24XX_DMA_USB_W2FC_RX0	56	/* S_DMA_55 */
-#define OMAP24XX_DMA_USB_W2FC_TX1	57	/* S_DMA_56 */
-#define OMAP24XX_DMA_USB_W2FC_RX1	58	/* S_DMA_57 */
-#define OMAP24XX_DMA_USB_W2FC_TX2	59	/* S_DMA_58 */
-#define OMAP24XX_DMA_USB_W2FC_RX2	60	/* S_DMA_59 */
-#define OMAP24XX_DMA_MMC1_TX		61	/* S_DMA_60 */
-#define OMAP24XX_DMA_MMC1_RX		62	/* S_DMA_61 */
-#define OMAP24XX_DMA_MS			63	/* S_DMA_62 */
-#define OMAP242X_DMA_EXT_DMAREQ5	64	/* S_DMA_63 */
-#define OMAP243X_DMA_EXT_DMAREQ6	64	/* S_DMA_63 */
-#define OMAP34XX_DMA_EXT_DMAREQ3	64	/* S_DMA_63 */
-#define OMAP34XX_DMA_AES2_TX		65	/* S_DMA_64 */
-#define OMAP34XX_DMA_AES2_RX		66	/* S_DMA_65 */
-#define OMAP34XX_DMA_DES2_TX		67	/* S_DMA_66 */
-#define OMAP34XX_DMA_DES2_RX		68	/* S_DMA_67 */
-#define OMAP34XX_DMA_SHA1MD5_RX		69	/* S_DMA_68 */
-#define OMAP34XX_DMA_SPI4_TX0		70	/* S_DMA_69 */
-#define OMAP34XX_DMA_SPI4_RX0		71	/* S_DMA_70 */
-#define OMAP34XX_DSS_DMA0		72	/* S_DMA_71 */
-#define OMAP34XX_DSS_DMA1		73	/* S_DMA_72 */
-#define OMAP34XX_DSS_DMA2		74	/* S_DMA_73 */
-#define OMAP34XX_DSS_DMA3		75	/* S_DMA_74 */
-#define OMAP34XX_DMA_MMC3_TX		77	/* S_DMA_76 */
-#define OMAP34XX_DMA_MMC3_RX		78	/* S_DMA_77 */
-#define OMAP34XX_DMA_USIM_TX		79	/* S_DMA_78 */
-#define OMAP34XX_DMA_USIM_RX		80	/* S_DMA_79 */
-
-/*----------------------------------------------------------------------------*/
-
-/* Hardware registers for LCD DMA */
-#define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
-#define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
-#define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
-#define OMAP1510_DMA_LCD_TOP_F1_U	(OMAP1510_DMA_LCD_BASE + 0x04)
-#define OMAP1510_DMA_LCD_BOT_F1_L	(OMAP1510_DMA_LCD_BASE + 0x06)
-#define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
-
-#define OMAP1610_DMA_LCD_BASE		(0xfffee300)
-#define OMAP1610_DMA_LCD_CSDP		(OMAP1610_DMA_LCD_BASE + 0xc0)
-#define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
-#define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
-#define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
-#define OMAP1610_DMA_LCD_TOP_B1_U	(OMAP1610_DMA_LCD_BASE + 0xca)
-#define OMAP1610_DMA_LCD_BOT_B1_L	(OMAP1610_DMA_LCD_BASE + 0xcc)
-#define OMAP1610_DMA_LCD_BOT_B1_U	(OMAP1610_DMA_LCD_BASE + 0xce)
-#define OMAP1610_DMA_LCD_TOP_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd0)
-#define OMAP1610_DMA_LCD_TOP_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd2)
-#define OMAP1610_DMA_LCD_BOT_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd4)
-#define OMAP1610_DMA_LCD_BOT_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd6)
-#define OMAP1610_DMA_LCD_SRC_EI_B1	(OMAP1610_DMA_LCD_BASE + 0xd8)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_L	(OMAP1610_DMA_LCD_BASE + 0xda)
-#define OMAP1610_DMA_LCD_SRC_EN_B1	(OMAP1610_DMA_LCD_BASE + 0xe0)
-#define OMAP1610_DMA_LCD_SRC_FN_B1	(OMAP1610_DMA_LCD_BASE + 0xe4)
-#define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
-
-#define OMAP1_DMA_TOUT_IRQ		(1 << 0)
-#define OMAP_DMA_DROP_IRQ		(1 << 1)
-#define OMAP_DMA_HALF_IRQ		(1 << 2)
-#define OMAP_DMA_FRAME_IRQ		(1 << 3)
-#define OMAP_DMA_LAST_IRQ		(1 << 4)
-#define OMAP_DMA_BLOCK_IRQ		(1 << 5)
-#define OMAP1_DMA_SYNC_IRQ		(1 << 6)
-#define OMAP2_DMA_PKT_IRQ		(1 << 7)
-#define OMAP2_DMA_TRANS_ERR_IRQ		(1 << 8)
-#define OMAP2_DMA_SECURE_ERR_IRQ	(1 << 9)
-#define OMAP2_DMA_SUPERVISOR_ERR_IRQ	(1 << 10)
-#define OMAP2_DMA_MISALIGNED_ERR_IRQ	(1 << 11)
-
-#define OMAP_DMA_DATA_TYPE_S8		0x00
-#define OMAP_DMA_DATA_TYPE_S16		0x01
-#define OMAP_DMA_DATA_TYPE_S32		0x02
-
-#define OMAP_DMA_SYNC_ELEMENT		0x00
-#define OMAP_DMA_SYNC_FRAME		0x01
-#define OMAP_DMA_SYNC_BLOCK		0x02
-#define OMAP_DMA_SYNC_PACKET		0x03
-
-#define OMAP_DMA_SRC_SYNC		0x01
-#define OMAP_DMA_DST_SYNC		0x00
-
-#define OMAP_DMA_PORT_EMIFF		0x00
-#define OMAP_DMA_PORT_EMIFS		0x01
-#define OMAP_DMA_PORT_OCP_T1		0x02
-#define OMAP_DMA_PORT_TIPB		0x03
-#define OMAP_DMA_PORT_OCP_T2		0x04
-#define OMAP_DMA_PORT_MPUI		0x05
-
-#define OMAP_DMA_AMODE_CONSTANT		0x00
-#define OMAP_DMA_AMODE_POST_INC		0x01
-#define OMAP_DMA_AMODE_SINGLE_IDX	0x02
-#define OMAP_DMA_AMODE_DOUBLE_IDX	0x03
-
-#define DMA_DEFAULT_FIFO_DEPTH		0x10
-#define DMA_DEFAULT_ARB_RATE		0x01
-/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */
-#define DMA_THREAD_RESERVE_NORM		(0x00 << 12) /* Def */
-#define DMA_THREAD_RESERVE_ONET		(0x01 << 12)
-#define DMA_THREAD_RESERVE_TWOT		(0x02 << 12)
-#define DMA_THREAD_RESERVE_THREET	(0x03 << 12)
-#define DMA_THREAD_FIFO_NONE		(0x00 << 14) /* Def */
-#define DMA_THREAD_FIFO_75		(0x01 << 14)
-#define DMA_THREAD_FIFO_25		(0x02 << 14)
-#define DMA_THREAD_FIFO_50		(0x03 << 14)
-
-/* Chaining modes*/
-#ifndef CONFIG_ARCH_OMAP1
-#define OMAP_DMA_STATIC_CHAIN		0x1
-#define OMAP_DMA_DYNAMIC_CHAIN		0x2
-#define OMAP_DMA_CHAIN_ACTIVE		0x1
-#define OMAP_DMA_CHAIN_INACTIVE		0x0
-#endif
-
-#define DMA_CH_PRIO_HIGH		0x1
-#define DMA_CH_PRIO_LOW			0x0 /* Def */
-
-/* LCD DMA block numbers */
-enum {
-	OMAP_LCD_DMA_B1_TOP,
-	OMAP_LCD_DMA_B1_BOTTOM,
-	OMAP_LCD_DMA_B2_TOP,
-	OMAP_LCD_DMA_B2_BOTTOM
-};
-
-enum omap_dma_burst_mode {
-	OMAP_DMA_DATA_BURST_DIS = 0,
-	OMAP_DMA_DATA_BURST_4,
-	OMAP_DMA_DATA_BURST_8,
-	OMAP_DMA_DATA_BURST_16,
-};
-
-enum end_type {
-	OMAP_DMA_LITTLE_ENDIAN = 0,
-	OMAP_DMA_BIG_ENDIAN
-};
-
-enum omap_dma_color_mode {
-	OMAP_DMA_COLOR_DIS = 0,
-	OMAP_DMA_CONSTANT_FILL,
-	OMAP_DMA_TRANSPARENT_COPY
-};
-
-enum omap_dma_write_mode {
-	OMAP_DMA_WRITE_NON_POSTED = 0,
-	OMAP_DMA_WRITE_POSTED,
-	OMAP_DMA_WRITE_LAST_NON_POSTED
-};
-
-enum omap_dma_channel_mode {
-	OMAP_DMA_LCH_2D = 0,
-	OMAP_DMA_LCH_G,
-	OMAP_DMA_LCH_P,
-	OMAP_DMA_LCH_PD
-};
-
-struct omap_dma_channel_params {
-	int data_type;		/* data type 8,16,32 */
-	int elem_count;		/* number of elements in a frame */
-	int frame_count;	/* number of frames in a element */
-
-	int src_port;		/* Only on OMAP1 REVISIT: Is this needed? */
-	int src_amode;		/* constant, post increment, indexed,
-					double indexed */
-	unsigned long src_start;	/* source address : physical */
-	int src_ei;		/* source element index */
-	int src_fi;		/* source frame index */
-
-	int dst_port;		/* Only on OMAP1 REVISIT: Is this needed? */
-	int dst_amode;		/* constant, post increment, indexed,
-					double indexed */
-	unsigned long dst_start;	/* source address : physical */
-	int dst_ei;		/* source element index */
-	int dst_fi;		/* source frame index */
-
-	int trigger;		/* trigger attached if the channel is
-					synchronized */
-	int sync_mode;		/* sycn on element, frame , block or packet */
-	int src_or_dst_synch;	/* source synch(1) or destination synch(0) */
-
-	int ie;			/* interrupt enabled */
-
-	unsigned char read_prio;/* read priority */
-	unsigned char write_prio;/* write priority */
-
-#ifndef CONFIG_ARCH_OMAP1
-	enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */
-#endif
-};
-
-
-extern void omap_set_dma_priority(int lch, int dst_port, int priority);
-extern int omap_request_dma(int dev_id, const char *dev_name,
-			void (*callback)(int lch, u16 ch_status, void *data),
-			void *data, int *dma_ch);
-extern void omap_enable_dma_irq(int ch, u16 irq_bits);
-extern void omap_disable_dma_irq(int ch, u16 irq_bits);
-extern void omap_free_dma(int ch);
-extern void omap_start_dma(int lch);
-extern void omap_stop_dma(int lch);
-extern void omap_set_dma_transfer_params(int lch, int data_type,
-					 int elem_count, int frame_count,
-					 int sync_mode,
-					 int dma_trigger, int src_or_dst_synch);
-extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode,
-				    u32 color);
-extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode);
-extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode);
-
-extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
-				    unsigned long src_start,
-				    int src_ei, int src_fi);
-extern void omap_set_dma_src_index(int lch, int eidx, int fidx);
-extern void omap_set_dma_src_data_pack(int lch, int enable);
-extern void omap_set_dma_src_burst_mode(int lch,
-					enum omap_dma_burst_mode burst_mode);
-
-extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
-				     unsigned long dest_start,
-				     int dst_ei, int dst_fi);
-extern void omap_set_dma_dest_index(int lch, int eidx, int fidx);
-extern void omap_set_dma_dest_data_pack(int lch, int enable);
-extern void omap_set_dma_dest_burst_mode(int lch,
-					 enum omap_dma_burst_mode burst_mode);
-
-extern void omap_set_dma_params(int lch,
-				struct omap_dma_channel_params *params);
-
-extern void omap_dma_link_lch(int lch_head, int lch_queue);
-extern void omap_dma_unlink_lch(int lch_head, int lch_queue);
-
-extern int omap_set_dma_callback(int lch,
-			void (*callback)(int lch, u16 ch_status, void *data),
-			void *data);
-extern dma_addr_t omap_get_dma_src_pos(int lch);
-extern dma_addr_t omap_get_dma_dst_pos(int lch);
-extern void omap_clear_dma(int lch);
-extern int omap_get_dma_active_status(int lch);
-extern int omap_dma_running(void);
-extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth,
-				       int tparams);
-extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio,
-				 unsigned char write_prio);
-extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype);
-extern void omap_set_dma_src_endian_type(int lch, enum end_type etype);
-extern int omap_get_dma_index(int lch, int *ei, int *fi);
-
-/* Chaining APIs */
-#ifndef CONFIG_ARCH_OMAP1
-extern int omap_request_dma_chain(int dev_id, const char *dev_name,
-				  void (*callback) (int chain_id, u16 ch_status,
-						    void *data),
-				  int *chain_id, int no_of_chans,
-				  int chain_mode,
-				  struct omap_dma_channel_params params);
-extern int omap_free_dma_chain(int chain_id);
-extern int omap_dma_chain_a_transfer(int chain_id, int src_start,
-				     int dest_start, int elem_count,
-				     int frame_count, void *callbk_data);
-extern int omap_start_dma_chain_transfers(int chain_id);
-extern int omap_stop_dma_chain_transfers(int chain_id);
-extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi);
-extern int omap_get_dma_chain_dst_pos(int chain_id);
-extern int omap_get_dma_chain_src_pos(int chain_id);
-
-extern int omap_modify_dma_chain_params(int chain_id,
-					struct omap_dma_channel_params params);
-extern int omap_dma_chain_status(int chain_id);
-#endif
-
-/* LCD DMA functions */
-extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
-				void *data);
-extern void omap_free_lcd_dma(void);
-extern void omap_setup_lcd_dma(void);
-extern void omap_enable_lcd_dma(void);
-extern void omap_stop_lcd_dma(void);
-extern void omap_set_lcd_dma_ext_controller(int external);
-extern void omap_set_lcd_dma_single_transfer(int single);
-extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
-				int data_type);
-extern void omap_set_lcd_dma_b1_rotation(int rotate);
-extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
-extern void omap_set_lcd_dma_b1_mirror(int mirror);
-extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-omap/dmtimer.h b/include/asm-arm/arch-omap/dmtimer.h
deleted file mode 100644
index 02b29e8..0000000
--- a/include/asm-arm/arch-omap/dmtimer.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/dmtimer.h
- *
- * OMAP Dual-Mode Timers
- *
- * Copyright (C) 2005 Nokia Corporation
- * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
- * PWM and clock framwork support by Timo Teras.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_DMTIMER_H
-#define __ASM_ARCH_DMTIMER_H
-
-/* clock sources */
-#define OMAP_TIMER_SRC_SYS_CLK			0x00
-#define OMAP_TIMER_SRC_32_KHZ			0x01
-#define OMAP_TIMER_SRC_EXT_CLK			0x02
-
-/* timer interrupt enable bits */
-#define OMAP_TIMER_INT_CAPTURE			(1 << 2)
-#define OMAP_TIMER_INT_OVERFLOW			(1 << 1)
-#define OMAP_TIMER_INT_MATCH			(1 << 0)
-
-/* trigger types */
-#define OMAP_TIMER_TRIGGER_NONE			0x00
-#define OMAP_TIMER_TRIGGER_OVERFLOW		0x01
-#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE	0x02
-
-struct omap_dm_timer;
-struct clk;
-
-int omap_dm_timer_init(void);
-
-struct omap_dm_timer *omap_dm_timer_request(void);
-struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
-void omap_dm_timer_free(struct omap_dm_timer *timer);
-void omap_dm_timer_enable(struct omap_dm_timer *timer);
-void omap_dm_timer_disable(struct omap_dm_timer *timer);
-
-int omap_dm_timer_get_irq(struct omap_dm_timer *timer);
-
-u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
-struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer);
-
-void omap_dm_timer_trigger(struct omap_dm_timer *timer);
-void omap_dm_timer_start(struct omap_dm_timer *timer);
-void omap_dm_timer_stop(struct omap_dm_timer *timer);
-
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
-void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
-void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
-void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
-void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
-void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
-
-void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
-
-unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
-void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
-unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
-void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
-
-int omap_dm_timers_active(void);
-
-
-#endif /* __ASM_ARCH_DMTIMER_H */
diff --git a/include/asm-arm/arch-omap/eac.h b/include/asm-arm/arch-omap/eac.h
deleted file mode 100644
index ccee3b0..0000000
--- a/include/asm-arm/arch-omap/eac.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap2/eac.h
- *
- * Defines for Enhanced Audio Controller
- *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
- *
- * Copyright (C) 2006 Nokia Corporation
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H
-#define __ASM_ARM_ARCH_OMAP2_EAC_H
-
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/irq.h>
-
-#include <sound/core.h>
-
-/* master codec clock source */
-#define EAC_MCLK_EXT_MASK	0x100
-enum eac_mclk_src {
-	EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */
-	EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK,
-	EAC_MCLK_EXT_12288000,
-	EAC_MCLK_EXT_2x11289600,
-	EAC_MCLK_EXT_2x12288000,
-};
-
-/* codec port interface mode */
-enum eac_codec_mode {
-	EAC_CODEC_PCM,
-	EAC_CODEC_AC97,
-	EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */
-	EAC_CODEC_I2S_SLAVE,
-};
-
-/* configuration structure for I2S mode */
-struct eac_i2s_conf {
-	/* if enabled, then first data slot (left channel) is signaled as
-	 * positive level of frame sync EAC.AC_FS */
-	unsigned	polarity_changed_mode:1;
-	/* if enabled, then serial data starts one clock cycle after the
-	 * of EAC.AC_FS for first audio slot */
-	unsigned	sync_delay_enable:1;
-};
-
-/* configuration structure for EAC codec port */
-struct eac_codec {
-	enum eac_mclk_src	mclk_src;
-
-	enum eac_codec_mode	codec_mode;
-	union {
-		struct eac_i2s_conf	i2s;
-	} codec_conf;
-
-	int		default_rate; /* audio sampling rate */
-
-	int		(* set_power)(void *private_data, int dac, int adc);
-	int		(* register_controls)(void *private_data,
-					      struct snd_card *card);
-	const char 	*short_name;
-
-	void		*private_data;
-};
-
-/* structure for passing platform dependent data to the EAC driver */
-struct eac_platform_data {
-        int	(* init)(struct device *eac_dev);
-	void	(* cleanup)(struct device *eac_dev);
-	/* these callbacks are used to configure & control external MCLK
-	 * source. NULL if not used */
-	int	(* enable_ext_clocks)(struct device *eac_dev);
-	void	(* disable_ext_clocks)(struct device *eac_dev);
-};
-
-extern void omap_init_eac(struct eac_platform_data *pdata);
-
-extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec);
-extern void eac_unregister_codec(struct device *eac_dev);
-
-extern int eac_set_mode(struct device *eac_dev, int play, int rec);
-
-#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */
diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S
deleted file mode 100644
index 67ed7839..0000000
--- a/include/asm-arm/arch-omap/entry-macro.S
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * include/asm-arm/arch-omap/entry-macro.S
- *
- * Low-level IRQ helper macros for OMAP-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-#include <asm/arch/io.h>
-#include <asm/arch/irqs.h>
-
-#if defined(CONFIG_ARCH_OMAP1)
-
-#if defined(CONFIG_ARCH_OMAP730) && \
-	(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
-#error "FIXME: OMAP730 doesn't support multiple-OMAP"
-#elif defined(CONFIG_ARCH_OMAP730)
-#define INT_IH2_IRQ		INT_730_IH2_IRQ
-#elif defined(CONFIG_ARCH_OMAP15XX)
-#define INT_IH2_IRQ		INT_1510_IH2_IRQ
-#elif defined(CONFIG_ARCH_OMAP16XX)
-#define INT_IH2_IRQ		INT_1610_IH2_IRQ
-#else
-#warning "IH2 IRQ defaulted"
-#define INT_IH2_IRQ		INT_1510_IH2_IRQ
-#endif
-
- 		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =IO_ADDRESS(OMAP_IH1_BASE)
-		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
-		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
-		mov	\irqstat, #0xffffffff
-		bic	\tmp, \irqstat, \tmp
-		tst	\irqnr, \tmp
-		beq	1510f
-
-		ldr	\irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
-		cmp	\irqnr, #0
-		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		cmpeq	\irqnr, #INT_IH2_IRQ
-		ldreq	\base, =IO_ADDRESS(OMAP_IH2_BASE)
-		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		addeqs	\irqnr, \irqnr, #32
-1510:
-		.endm
-
-#elif defined(CONFIG_ARCH_OMAP24XX)
-
-#include <asm/arch/omap24xx.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =OMAP2_VA_IC_BASE
-		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
-		cmp	\irqnr, #0x0
-		bne	2222f
-		ldr	\irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
-		cmp	\irqnr, #0x0
-		bne	2222f
-		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
-		cmp	\irqnr, #0x0
-2222:
-		ldrne	\irqnr, [\base, #IRQ_SIR_IRQ]
-
-		.endm
-
-		.macro	irq_prio_table
-		.endm
-
-#endif
diff --git a/include/asm-arm/arch-omap/fpga.h b/include/asm-arm/arch-omap/fpga.h
deleted file mode 100644
index f420881..0000000
--- a/include/asm-arm/arch-omap/fpga.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/fpga.h
- *
- * Interrupt handler for OMAP-1510 FPGA
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_FPGA_H
-#define __ASM_ARCH_OMAP_FPGA_H
-
-#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX)
-extern void omap1510_fpga_init_irq(void);
-#else
-#define omap1510_fpga_init_irq()	(0)
-#endif
-
-#define fpga_read(reg)			__raw_readb(reg)
-#define fpga_write(val, reg)		__raw_writeb(val, reg)
-
-/*
- * ---------------------------------------------------------------------------
- *  H2/P2 Debug board FPGA
- * ---------------------------------------------------------------------------
- */
-/* maps in the FPGA registers and the ETHR registers */
-#define H2P2_DBG_FPGA_BASE		0xE8000000	/* VA */
-#define H2P2_DBG_FPGA_SIZE		SZ_4K		/* SIZE */
-#define H2P2_DBG_FPGA_START		0x04000000	/* PA */
-
-#define H2P2_DBG_FPGA_ETHR_START	(H2P2_DBG_FPGA_START + 0x300)
-#define H2P2_DBG_FPGA_FPGA_REV		(H2P2_DBG_FPGA_BASE + 0x10)	/* FPGA Revision */
-#define H2P2_DBG_FPGA_BOARD_REV		(H2P2_DBG_FPGA_BASE + 0x12)	/* Board Revision */
-#define H2P2_DBG_FPGA_GPIO		(H2P2_DBG_FPGA_BASE + 0x14)	/* GPIO outputs */
-#define H2P2_DBG_FPGA_LEDS		(H2P2_DBG_FPGA_BASE + 0x16)	/* LEDs outputs */
-#define H2P2_DBG_FPGA_MISC_INPUTS	(H2P2_DBG_FPGA_BASE + 0x18)	/* Misc inputs */
-#define H2P2_DBG_FPGA_LAN_STATUS	(H2P2_DBG_FPGA_BASE + 0x1A)	/* LAN Status line */
-#define H2P2_DBG_FPGA_LAN_RESET		(H2P2_DBG_FPGA_BASE + 0x1C)	/* LAN Reset line */
-
-/* NOTE:  most boards don't have a static mapping for the FPGA ... */
-struct h2p2_dbg_fpga {
-	/* offset 0x00 */
-	u16		smc91x[8];
-	/* offset 0x10 */
-	u16		fpga_rev;
-	u16		board_rev;
-	u16		gpio_outputs;
-	u16		leds;
-	/* offset 0x18 */
-	u16		misc_inputs;
-	u16		lan_status;
-	u16		lan_reset;
-	u16		reserved0;
-	/* offset 0x20 */
-	u16		ps2_data;
-	u16		ps2_ctrl;
-	/* plus also 4 rs232 ports ... */
-};
-
-/* LEDs definition on debug board (16 LEDs, all physically green) */
-#define H2P2_DBG_FPGA_LED_GREEN		(1 << 15)
-#define H2P2_DBG_FPGA_LED_AMBER		(1 << 14)
-#define H2P2_DBG_FPGA_LED_RED		(1 << 13)
-#define H2P2_DBG_FPGA_LED_BLUE		(1 << 12)
-/*  cpu0 load-meter LEDs */
-#define H2P2_DBG_FPGA_LOAD_METER	(1 << 0)	// A bit of fun on our board ...
-#define H2P2_DBG_FPGA_LOAD_METER_SIZE	11
-#define H2P2_DBG_FPGA_LOAD_METER_MASK	((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
-
-#define H2P2_DBG_FPGA_P2_LED_TIMER		(1 << 0)
-#define H2P2_DBG_FPGA_P2_LED_IDLE		(1 << 1)
-
-/*
- * ---------------------------------------------------------------------------
- *  OMAP-1510 FPGA
- * ---------------------------------------------------------------------------
- */
-#define OMAP1510_FPGA_BASE			0xE8000000	/* Virtual */
-#define OMAP1510_FPGA_SIZE			SZ_4K
-#define OMAP1510_FPGA_START			0x08000000	/* Physical */
-
-/* Revision */
-#define OMAP1510_FPGA_REV_LOW			(OMAP1510_FPGA_BASE + 0x0)
-#define OMAP1510_FPGA_REV_HIGH			(OMAP1510_FPGA_BASE + 0x1)
-
-#define OMAP1510_FPGA_LCD_PANEL_CONTROL		(OMAP1510_FPGA_BASE + 0x2)
-#define OMAP1510_FPGA_LED_DIGIT			(OMAP1510_FPGA_BASE + 0x3)
-#define INNOVATOR_FPGA_HID_SPI			(OMAP1510_FPGA_BASE + 0x4)
-#define OMAP1510_FPGA_POWER			(OMAP1510_FPGA_BASE + 0x5)
-
-/* Interrupt status */
-#define OMAP1510_FPGA_ISR_LO			(OMAP1510_FPGA_BASE + 0x6)
-#define OMAP1510_FPGA_ISR_HI			(OMAP1510_FPGA_BASE + 0x7)
-
-/* Interrupt mask */
-#define OMAP1510_FPGA_IMR_LO			(OMAP1510_FPGA_BASE + 0x8)
-#define OMAP1510_FPGA_IMR_HI			(OMAP1510_FPGA_BASE + 0x9)
-
-/* Reset registers */
-#define OMAP1510_FPGA_HOST_RESET		(OMAP1510_FPGA_BASE + 0xa)
-#define OMAP1510_FPGA_RST			(OMAP1510_FPGA_BASE + 0xb)
-
-#define OMAP1510_FPGA_AUDIO			(OMAP1510_FPGA_BASE + 0xc)
-#define OMAP1510_FPGA_DIP			(OMAP1510_FPGA_BASE + 0xe)
-#define OMAP1510_FPGA_FPGA_IO			(OMAP1510_FPGA_BASE + 0xf)
-#define OMAP1510_FPGA_UART1			(OMAP1510_FPGA_BASE + 0x14)
-#define OMAP1510_FPGA_UART2			(OMAP1510_FPGA_BASE + 0x15)
-#define OMAP1510_FPGA_OMAP1510_STATUS		(OMAP1510_FPGA_BASE + 0x16)
-#define OMAP1510_FPGA_BOARD_REV			(OMAP1510_FPGA_BASE + 0x18)
-#define OMAP1510P1_PPT_DATA			(OMAP1510_FPGA_BASE + 0x100)
-#define OMAP1510P1_PPT_STATUS			(OMAP1510_FPGA_BASE + 0x101)
-#define OMAP1510P1_PPT_CONTROL			(OMAP1510_FPGA_BASE + 0x102)
-
-#define OMAP1510_FPGA_TOUCHSCREEN		(OMAP1510_FPGA_BASE + 0x204)
-
-#define INNOVATOR_FPGA_INFO			(OMAP1510_FPGA_BASE + 0x205)
-#define INNOVATOR_FPGA_LCD_BRIGHT_LO		(OMAP1510_FPGA_BASE + 0x206)
-#define INNOVATOR_FPGA_LCD_BRIGHT_HI		(OMAP1510_FPGA_BASE + 0x207)
-#define INNOVATOR_FPGA_LED_GRN_LO		(OMAP1510_FPGA_BASE + 0x208)
-#define INNOVATOR_FPGA_LED_GRN_HI		(OMAP1510_FPGA_BASE + 0x209)
-#define INNOVATOR_FPGA_LED_RED_LO		(OMAP1510_FPGA_BASE + 0x20a)
-#define INNOVATOR_FPGA_LED_RED_HI		(OMAP1510_FPGA_BASE + 0x20b)
-#define INNOVATOR_FPGA_CAM_USB_CONTROL		(OMAP1510_FPGA_BASE + 0x20c)
-#define INNOVATOR_FPGA_EXP_CONTROL		(OMAP1510_FPGA_BASE + 0x20d)
-#define INNOVATOR_FPGA_ISR2			(OMAP1510_FPGA_BASE + 0x20e)
-#define INNOVATOR_FPGA_IMR2			(OMAP1510_FPGA_BASE + 0x210)
-
-#define OMAP1510_FPGA_ETHR_START		(OMAP1510_FPGA_START + 0x300)
-
-/*
- * Power up Giga UART driver, turn on HID clock.
- * Turn off BT power, since we're not using it and it
- * draws power.
- */
-#define OMAP1510_FPGA_RESET_VALUE		0x42
-
-#define OMAP1510_FPGA_PCR_IF_PD0		(1 << 7)
-#define OMAP1510_FPGA_PCR_COM2_EN		(1 << 6)
-#define OMAP1510_FPGA_PCR_COM1_EN		(1 << 5)
-#define OMAP1510_FPGA_PCR_EXP_PD0		(1 << 4)
-#define OMAP1510_FPGA_PCR_EXP_PD1		(1 << 3)
-#define OMAP1510_FPGA_PCR_48MHZ_CLK		(1 << 2)
-#define OMAP1510_FPGA_PCR_4MHZ_CLK		(1 << 1)
-#define OMAP1510_FPGA_PCR_RSRVD_BIT0		(1 << 0)
-
-/*
- * Innovator/OMAP1510 FPGA HID register bit definitions
- */
-#define OMAP1510_FPGA_HID_SCLK	(1<<0)	/* output */
-#define OMAP1510_FPGA_HID_MOSI	(1<<1)	/* output */
-#define OMAP1510_FPGA_HID_nSS	(1<<2)	/* output 0/1 chip idle/select */
-#define OMAP1510_FPGA_HID_nHSUS	(1<<3)	/* output 0/1 host active/suspended */
-#define OMAP1510_FPGA_HID_MISO	(1<<4)	/* input */
-#define OMAP1510_FPGA_HID_ATN	(1<<5)	/* input  0/1 chip idle/ATN */
-#define OMAP1510_FPGA_HID_rsrvd	(1<<6)
-#define OMAP1510_FPGA_HID_RESETn (1<<7)	/* output - 0/1 USAR reset/run */
-
-/* The FPGA IRQ is cascaded through GPIO_13 */
-#define OMAP1510_INT_FPGA		(IH_GPIO_BASE + 13)
-
-/* IRQ Numbers for interrupts muxed through the FPGA */
-#define OMAP1510_INT_FPGA_ATN		(OMAP_FPGA_IRQ_BASE + 0)
-#define OMAP1510_INT_FPGA_ACK		(OMAP_FPGA_IRQ_BASE + 1)
-#define OMAP1510_INT_FPGA2		(OMAP_FPGA_IRQ_BASE + 2)
-#define OMAP1510_INT_FPGA3		(OMAP_FPGA_IRQ_BASE + 3)
-#define OMAP1510_INT_FPGA4		(OMAP_FPGA_IRQ_BASE + 4)
-#define OMAP1510_INT_FPGA5		(OMAP_FPGA_IRQ_BASE + 5)
-#define OMAP1510_INT_FPGA6		(OMAP_FPGA_IRQ_BASE + 6)
-#define OMAP1510_INT_FPGA7		(OMAP_FPGA_IRQ_BASE + 7)
-#define OMAP1510_INT_FPGA8		(OMAP_FPGA_IRQ_BASE + 8)
-#define OMAP1510_INT_FPGA9		(OMAP_FPGA_IRQ_BASE + 9)
-#define OMAP1510_INT_FPGA10		(OMAP_FPGA_IRQ_BASE + 10)
-#define OMAP1510_INT_FPGA11		(OMAP_FPGA_IRQ_BASE + 11)
-#define OMAP1510_INT_FPGA12		(OMAP_FPGA_IRQ_BASE + 12)
-#define OMAP1510_INT_ETHER		(OMAP_FPGA_IRQ_BASE + 13)
-#define OMAP1510_INT_FPGAUART1		(OMAP_FPGA_IRQ_BASE + 14)
-#define OMAP1510_INT_FPGAUART2		(OMAP_FPGA_IRQ_BASE + 15)
-#define OMAP1510_INT_FPGA_TS		(OMAP_FPGA_IRQ_BASE + 16)
-#define OMAP1510_INT_FPGA17		(OMAP_FPGA_IRQ_BASE + 17)
-#define OMAP1510_INT_FPGA_CAM		(OMAP_FPGA_IRQ_BASE + 18)
-#define OMAP1510_INT_FPGA_RTC_A		(OMAP_FPGA_IRQ_BASE + 19)
-#define OMAP1510_INT_FPGA_RTC_B		(OMAP_FPGA_IRQ_BASE + 20)
-#define OMAP1510_INT_FPGA_CD		(OMAP_FPGA_IRQ_BASE + 21)
-#define OMAP1510_INT_FPGA22		(OMAP_FPGA_IRQ_BASE + 22)
-#define OMAP1510_INT_FPGA23		(OMAP_FPGA_IRQ_BASE + 23)
-
-#endif
diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h
deleted file mode 100644
index 5ee6a49..0000000
--- a/include/asm-arm/arch-omap/gpio.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/gpio.h
- *
- * OMAP GPIO handling defines and functions
- *
- * Copyright (C) 2003-2005 Nokia Corporation
- *
- * Written by Juha Yrjölä <juha.yrjola@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_OMAP_GPIO_H
-#define __ASM_ARCH_OMAP_GPIO_H
-
-#include <asm/arch/irqs.h>
-#include <asm/io.h>
-
-#define OMAP_MPUIO_BASE			(void __iomem *)0xfffb5000
-
-#ifdef CONFIG_ARCH_OMAP730
-#define OMAP_MPUIO_INPUT_LATCH		0x00
-#define OMAP_MPUIO_OUTPUT		0x02
-#define OMAP_MPUIO_IO_CNTL		0x04
-#define OMAP_MPUIO_KBR_LATCH		0x08
-#define OMAP_MPUIO_KBC			0x0a
-#define OMAP_MPUIO_GPIO_EVENT_MODE	0x0c
-#define OMAP_MPUIO_GPIO_INT_EDGE	0x0e
-#define OMAP_MPUIO_KBD_INT		0x10
-#define OMAP_MPUIO_GPIO_INT		0x12
-#define OMAP_MPUIO_KBD_MASKIT		0x14
-#define OMAP_MPUIO_GPIO_MASKIT		0x16
-#define OMAP_MPUIO_GPIO_DEBOUNCING	0x18
-#define OMAP_MPUIO_LATCH		0x1a
-#else
-#define OMAP_MPUIO_INPUT_LATCH		0x00
-#define OMAP_MPUIO_OUTPUT		0x04
-#define OMAP_MPUIO_IO_CNTL		0x08
-#define OMAP_MPUIO_KBR_LATCH		0x10
-#define OMAP_MPUIO_KBC			0x14
-#define OMAP_MPUIO_GPIO_EVENT_MODE	0x18
-#define OMAP_MPUIO_GPIO_INT_EDGE	0x1c
-#define OMAP_MPUIO_KBD_INT		0x20
-#define OMAP_MPUIO_GPIO_INT		0x24
-#define OMAP_MPUIO_KBD_MASKIT		0x28
-#define OMAP_MPUIO_GPIO_MASKIT		0x2c
-#define OMAP_MPUIO_GPIO_DEBOUNCING	0x30
-#define OMAP_MPUIO_LATCH		0x34
-#endif
-
-#define OMAP34XX_NR_GPIOS		6
-
-#define OMAP_MPUIO(nr)		(OMAP_MAX_GPIO_LINES + (nr))
-#define OMAP_GPIO_IS_MPUIO(nr)	((nr) >= OMAP_MAX_GPIO_LINES)
-
-#define OMAP_GPIO_IRQ(nr)	(OMAP_GPIO_IS_MPUIO(nr) ? \
-				 IH_MPUIO_BASE + ((nr) & 0x0f) : \
-				 IH_GPIO_BASE + (nr))
-
-extern int omap_gpio_init(void);	/* Call from board init only */
-extern int omap_request_gpio(int gpio);
-extern void omap_free_gpio(int gpio);
-extern void omap_set_gpio_direction(int gpio, int is_input);
-extern void omap_set_gpio_dataout(int gpio, int enable);
-extern int omap_get_gpio_datain(int gpio);
-extern void omap_set_gpio_debounce(int gpio, int enable);
-extern void omap_set_gpio_debounce_time(int gpio, int enable);
-
-/*-------------------------------------------------------------------------*/
-
-/* Wrappers for "new style" GPIO calls, using the new infrastructure
- * which lets us plug in FPGA, I2C, and other implementations.
- * *
- * The original OMAP-specfic calls should eventually be removed.
- */
-
-#include <linux/errno.h>
-#include <asm-generic/gpio.h>
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	if (gpio < (OMAP_MAX_GPIO_LINES + 16))
-		return OMAP_GPIO_IRQ(gpio);
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16)))
-		return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES;
-	return irq - IH_GPIO_BASE;
-}
-
-#endif
diff --git a/include/asm-arm/arch-omap/gpioexpander.h b/include/asm-arm/arch-omap/gpioexpander.h
deleted file mode 100644
index 4eed1f8..0000000
--- a/include/asm-arm/arch-omap/gpioexpander.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/gpioexpander.h
- *
- *
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H
-#define __ASM_ARCH_OMAP_GPIOEXPANDER_H
-
-/* Function Prototypes for GPIO Expander functions */
-
-#ifdef CONFIG_GPIOEXPANDER_OMAP
-int read_gpio_expa(u8 *, int);
-int write_gpio_expa(u8 , int);
-#else
-static inline int read_gpio_expa(u8 *val, int addr)
-{
-	return 0;
-}
-static inline int write_gpio_expa(u8 val, int addr)
-{
-	return 0;
-}
-#endif
-
-#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */
diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h
deleted file mode 100644
index 45fdfcc..0000000
--- a/include/asm-arm/arch-omap/hardware.h
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/hardware.h
- *
- * Hardware definitions for TI OMAP processors and boards
- *
- * NOTE: Please put device driver specific defines into a separate header
- *	 file for each driver.
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
- *
- * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
- *                          and Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_HARDWARE_H
-#define __ASM_ARCH_OMAP_HARDWARE_H
-
-#include <asm/sizes.h>
-#ifndef __ASSEMBLER__
-#include <asm/types.h>
-#include <asm/arch/cpu.h>
-#endif
-#include <asm/arch/serial.h>
-
-/*
- * ---------------------------------------------------------------------------
- * Common definitions for all OMAP processors
- * NOTE: Put all processor or board specific parts to the special header
- *	 files.
- * ---------------------------------------------------------------------------
- */
-
-/*
- * ----------------------------------------------------------------------------
- * Timers
- * ----------------------------------------------------------------------------
- */
-#define OMAP_MPU_TIMER1_BASE	(0xfffec500)
-#define OMAP_MPU_TIMER2_BASE	(0xfffec600)
-#define OMAP_MPU_TIMER3_BASE	(0xfffec700)
-#define MPU_TIMER_FREE		(1 << 6)
-#define MPU_TIMER_CLOCK_ENABLE	(1 << 5)
-#define MPU_TIMER_AR		(1 << 1)
-#define MPU_TIMER_ST		(1 << 0)
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_BASE		(0xfffece00)
-#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
-#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
-#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
-#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
-#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
-#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
-#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
-#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
-
-#define CK_RATEF		1
-#define CK_IDLEF		2
-#define CK_ENABLEF		4
-#define CK_SELECTF		8
-#define SETARM_IDLE_SHIFT
-
-/* DPLL control registers */
-#define DPLL_CTL		(0xfffecf00)
-
-/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
-#define DSP_CONFIG_REG_BASE     (0xe1008000)
-#define DSP_CKCTL		(DSP_CONFIG_REG_BASE + 0x0)
-#define DSP_IDLECT1		(DSP_CONFIG_REG_BASE + 0x4)
-#define DSP_IDLECT2		(DSP_CONFIG_REG_BASE + 0x8)
-#define DSP_RSTCT2		(DSP_CONFIG_REG_BASE + 0x14)
-
-/*
- * ---------------------------------------------------------------------------
- * UPLD
- * ---------------------------------------------------------------------------
- */
-#define ULPD_REG_BASE		(0xfffe0800)
-#define ULPD_IT_STATUS		(ULPD_REG_BASE + 0x14)
-#define ULPD_SETUP_ANALOG_CELL_3	(ULPD_REG_BASE + 0x24)
-#define ULPD_CLOCK_CTRL		(ULPD_REG_BASE + 0x30)
-#	define DIS_USB_PVCI_CLK		(1 << 5)	/* no USB/FAC synch */
-#	define USB_MCLK_EN		(1 << 4)	/* enable W4_USB_CLKO */
-#define ULPD_SOFT_REQ		(ULPD_REG_BASE + 0x34)
-#	define SOFT_UDC_REQ		(1 << 4)
-#	define SOFT_USB_CLK_REQ		(1 << 3)
-#	define SOFT_DPLL_REQ		(1 << 0)
-#define ULPD_DPLL_CTRL		(ULPD_REG_BASE + 0x3c)
-#define ULPD_STATUS_REQ		(ULPD_REG_BASE + 0x40)
-#define ULPD_APLL_CTRL		(ULPD_REG_BASE + 0x4c)
-#define ULPD_POWER_CTRL		(ULPD_REG_BASE + 0x50)
-#define ULPD_SOFT_DISABLE_REQ_REG	(ULPD_REG_BASE + 0x68)
-#	define DIS_MMC2_DPLL_REQ	(1 << 11)
-#	define DIS_MMC1_DPLL_REQ	(1 << 10)
-#	define DIS_UART3_DPLL_REQ	(1 << 9)
-#	define DIS_UART2_DPLL_REQ	(1 << 8)
-#	define DIS_UART1_DPLL_REQ	(1 << 7)
-#	define DIS_USB_HOST_DPLL_REQ	(1 << 6)
-#define ULPD_SDW_CLK_DIV_CTRL_SEL	(ULPD_REG_BASE + 0x74)
-#define ULPD_CAM_CLK_CTRL	(ULPD_REG_BASE + 0x7c)
-
-/*
- * ---------------------------------------------------------------------------
- * Watchdog timer
- * ---------------------------------------------------------------------------
- */
-
-/* Watchdog timer within the OMAP3.2 gigacell */
-#define OMAP_MPU_WATCHDOG_BASE	(0xfffec800)
-#define OMAP_WDT_TIMER		(OMAP_MPU_WATCHDOG_BASE + 0x0)
-#define OMAP_WDT_LOAD_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
-#define OMAP_WDT_READ_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
-#define OMAP_WDT_TIMER_MODE	(OMAP_MPU_WATCHDOG_BASE + 0x8)
-
-/*
- * ---------------------------------------------------------------------------
- * Interrupts
- * ---------------------------------------------------------------------------
- */
-#ifdef CONFIG_ARCH_OMAP1
-
-/*
- * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
- * or something similar.. -- PFM.
- */
-
-#define OMAP_IH1_BASE		0xfffecb00
-#define OMAP_IH2_BASE		0xfffe0000
-
-#define OMAP_IH1_ITR		(OMAP_IH1_BASE + 0x00)
-#define OMAP_IH1_MIR		(OMAP_IH1_BASE + 0x04)
-#define OMAP_IH1_SIR_IRQ	(OMAP_IH1_BASE + 0x10)
-#define OMAP_IH1_SIR_FIQ	(OMAP_IH1_BASE + 0x14)
-#define OMAP_IH1_CONTROL	(OMAP_IH1_BASE + 0x18)
-#define OMAP_IH1_ILR0		(OMAP_IH1_BASE + 0x1c)
-#define OMAP_IH1_ISR		(OMAP_IH1_BASE + 0x9c)
-
-#define OMAP_IH2_ITR		(OMAP_IH2_BASE + 0x00)
-#define OMAP_IH2_MIR		(OMAP_IH2_BASE + 0x04)
-#define OMAP_IH2_SIR_IRQ	(OMAP_IH2_BASE + 0x10)
-#define OMAP_IH2_SIR_FIQ	(OMAP_IH2_BASE + 0x14)
-#define OMAP_IH2_CONTROL	(OMAP_IH2_BASE + 0x18)
-#define OMAP_IH2_ILR0		(OMAP_IH2_BASE + 0x1c)
-#define OMAP_IH2_ISR		(OMAP_IH2_BASE + 0x9c)
-
-#define IRQ_ITR_REG_OFFSET	0x00
-#define IRQ_MIR_REG_OFFSET	0x04
-#define IRQ_SIR_IRQ_REG_OFFSET	0x10
-#define IRQ_SIR_FIQ_REG_OFFSET	0x14
-#define IRQ_CONTROL_REG_OFFSET	0x18
-#define IRQ_ISR_REG_OFFSET	0x9c
-#define IRQ_ILR0_REG_OFFSET	0x1c
-#define IRQ_GMR_REG_OFFSET	0xa0
-
-#endif
-
-/*
- * ----------------------------------------------------------------------------
- * System control registers
- * ----------------------------------------------------------------------------
- */
-#define MOD_CONF_CTRL_0		0xfffe1080
-#define MOD_CONF_CTRL_1		0xfffe1110
-
-/*
- * ----------------------------------------------------------------------------
- * Pin multiplexing registers
- * ----------------------------------------------------------------------------
- */
-#define FUNC_MUX_CTRL_0		0xfffe1000
-#define FUNC_MUX_CTRL_1		0xfffe1004
-#define FUNC_MUX_CTRL_2		0xfffe1008
-#define COMP_MODE_CTRL_0	0xfffe100c
-#define FUNC_MUX_CTRL_3		0xfffe1010
-#define FUNC_MUX_CTRL_4		0xfffe1014
-#define FUNC_MUX_CTRL_5		0xfffe1018
-#define FUNC_MUX_CTRL_6		0xfffe101C
-#define FUNC_MUX_CTRL_7		0xfffe1020
-#define FUNC_MUX_CTRL_8		0xfffe1024
-#define FUNC_MUX_CTRL_9		0xfffe1028
-#define FUNC_MUX_CTRL_A		0xfffe102C
-#define FUNC_MUX_CTRL_B		0xfffe1030
-#define FUNC_MUX_CTRL_C		0xfffe1034
-#define FUNC_MUX_CTRL_D		0xfffe1038
-#define PULL_DWN_CTRL_0		0xfffe1040
-#define PULL_DWN_CTRL_1		0xfffe1044
-#define PULL_DWN_CTRL_2		0xfffe1048
-#define PULL_DWN_CTRL_3		0xfffe104c
-#define PULL_DWN_CTRL_4		0xfffe10ac
-
-/* OMAP-1610 specific multiplexing registers */
-#define FUNC_MUX_CTRL_E		0xfffe1090
-#define FUNC_MUX_CTRL_F		0xfffe1094
-#define FUNC_MUX_CTRL_10	0xfffe1098
-#define FUNC_MUX_CTRL_11	0xfffe109c
-#define FUNC_MUX_CTRL_12	0xfffe10a0
-#define PU_PD_SEL_0		0xfffe10b4
-#define PU_PD_SEL_1		0xfffe10b8
-#define PU_PD_SEL_2		0xfffe10bc
-#define PU_PD_SEL_3		0xfffe10c0
-#define PU_PD_SEL_4		0xfffe10c4
-
-/* Timer32K for 1610 and 1710*/
-#define OMAP_TIMER32K_BASE	0xFFFBC400
-
-/*
- * ---------------------------------------------------------------------------
- * TIPB bus interface
- * ---------------------------------------------------------------------------
- */
-#define TIPB_PUBLIC_CNTL_BASE		0xfffed300
-#define MPU_PUBLIC_TIPB_CNTL		(TIPB_PUBLIC_CNTL_BASE + 0x8)
-#define TIPB_PRIVATE_CNTL_BASE		0xfffeca00
-#define MPU_PRIVATE_TIPB_CNTL		(TIPB_PRIVATE_CNTL_BASE + 0x8)
-
-/*
- * ----------------------------------------------------------------------------
- * MPUI interface
- * ----------------------------------------------------------------------------
- */
-#define MPUI_BASE			(0xfffec900)
-#define MPUI_CTRL			(MPUI_BASE + 0x0)
-#define MPUI_DEBUG_ADDR			(MPUI_BASE + 0x4)
-#define MPUI_DEBUG_DATA			(MPUI_BASE + 0x8)
-#define MPUI_DEBUG_FLAG			(MPUI_BASE + 0xc)
-#define MPUI_STATUS_REG			(MPUI_BASE + 0x10)
-#define MPUI_DSP_STATUS			(MPUI_BASE + 0x14)
-#define MPUI_DSP_BOOT_CONFIG		(MPUI_BASE + 0x18)
-#define MPUI_DSP_API_CONFIG		(MPUI_BASE + 0x1c)
-
-/*
- * ----------------------------------------------------------------------------
- * LED Pulse Generator
- * ----------------------------------------------------------------------------
- */
-#define OMAP_LPG1_BASE			0xfffbd000
-#define OMAP_LPG2_BASE			0xfffbd800
-#define OMAP_LPG1_LCR			(OMAP_LPG1_BASE + 0x00)
-#define OMAP_LPG1_PMR			(OMAP_LPG1_BASE + 0x04)
-#define OMAP_LPG2_LCR			(OMAP_LPG2_BASE + 0x00)
-#define OMAP_LPG2_PMR			(OMAP_LPG2_BASE + 0x04)
-
-/*
- * ----------------------------------------------------------------------------
- * Pulse-Width Light
- * ----------------------------------------------------------------------------
- */
-#define OMAP_PWL_BASE			0xfffb5800
-#define OMAP_PWL_ENABLE			(OMAP_PWL_BASE + 0x00)
-#define OMAP_PWL_CLK_ENABLE		(OMAP_PWL_BASE + 0x04)
-
-/*
- * ---------------------------------------------------------------------------
- * Processor specific defines
- * ---------------------------------------------------------------------------
- */
-
-#include "omap730.h"
-#include "omap1510.h"
-#include "omap24xx.h"
-#include "omap16xx.h"
-#include "omap34xx.h"
-
-#ifndef __ASSEMBLER__
-
-/*
- * ---------------------------------------------------------------------------
- * Board specific defines
- * ---------------------------------------------------------------------------
- */
-
-#ifdef CONFIG_MACH_OMAP_INNOVATOR
-#include "board-innovator.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_H2
-#include "board-h2.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
-#include "board-perseus2.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_FSAMPLE
-#include "board-fsample.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_H3
-#include "board-h3.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_H4
-#include "board-h4.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_2430SDP
-#include "board-2430sdp.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_APOLLON
-#include "board-apollon.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_OSK
-#include "board-osk.h"
-#endif
-
-#ifdef CONFIG_MACH_VOICEBLUE
-#include "board-voiceblue.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMTE
-#include "board-palmte.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMZ71
-#include "board-palmz71.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMTT
-#include "board-palmtt.h"
-#endif
-
-#ifdef CONFIG_MACH_SX1
-#include "board-sx1.h"
-#endif
-
-#endif /* !__ASSEMBLER__ */
-
-#endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h
deleted file mode 100644
index 449e356..0000000
--- a/include/asm-arm/arch-omap/io.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/io.h
- *
- * IO definitions for TI OMAP processors and boards
- *
- * Copied from linux/include/asm-arm/arch-sa1100/io.h
- * Copyright (C) 1997-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Modifications:
- *  06-12-1997	RMK	Created.
- *  07-04-1999	RMK	Major cleanup
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
-#define __mem_pci(a)		(a)
-
-/*
- * ----------------------------------------------------------------------------
- * I/O mapping
- * ----------------------------------------------------------------------------
- */
-
-#define PCIO_BASE	0
-
-#if defined(CONFIG_ARCH_OMAP1)
-
-#define IO_PHYS		0xFFFB0000
-#define IO_OFFSET	0x01000000	/* Virtual IO = 0xfefb0000 */
-#define IO_SIZE		0x40000
-#define IO_VIRT		(IO_PHYS - IO_OFFSET)
-#define IO_ADDRESS(pa)	((pa) - IO_OFFSET)
-#define OMAP1_IO_ADDRESS(pa)	((pa) - IO_OFFSET)
-#define io_p2v(pa)	((pa) - IO_OFFSET)
-#define io_v2p(va)	((va) + IO_OFFSET)
-
-#elif defined(CONFIG_ARCH_OMAP2)
-
-/* We map both L3 and L4 on OMAP2 */
-#define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 */
-#define L3_24XX_VIRT	0xf8000000
-#define L3_24XX_SIZE	SZ_1M		/* 44kB of 128MB used, want 1MB sect */
-#define L4_24XX_PHYS	L4_24XX_BASE	/* 0x48000000 */
-#define L4_24XX_VIRT	0xd8000000
-#define L4_24XX_SIZE	SZ_1M		/* 1MB of 128MB used, want 1MB sect */
-
-#ifdef CONFIG_ARCH_OMAP2430
-#define L4_WK_243X_PHYS		L4_WK_243X_BASE		/* 0x49000000 */
-#define L4_WK_243X_VIRT		0xd9000000
-#define L4_WK_243X_SIZE		SZ_1M
-#define OMAP243X_GPMC_PHYS	OMAP243X_GPMC_BASE	/* 0x49000000 */
-#define OMAP243X_GPMC_VIRT	0xFE000000
-#define OMAP243X_GPMC_SIZE	SZ_1M
-#define OMAP243X_SDRC_PHYS	OMAP243X_SDRC_BASE
-#define OMAP243X_SDRC_VIRT	0xFD000000
-#define OMAP243X_SDRC_SIZE	SZ_1M
-#define OMAP243X_SMS_PHYS	OMAP243X_SMS_BASE
-#define OMAP243X_SMS_VIRT	0xFC000000
-#define OMAP243X_SMS_SIZE	SZ_1M
-
-#endif
-
-#define IO_OFFSET	0x90000000
-#define IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
-#define OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
-#define io_p2v(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
-#define io_v2p(va)	((va) - IO_OFFSET)	/* Works for L3 and L4 */
-
-/* DSP */
-#define DSP_MEM_24XX_PHYS	OMAP2420_DSP_MEM_BASE	/* 0x58000000 */
-#define DSP_MEM_24XX_VIRT	0xe0000000
-#define DSP_MEM_24XX_SIZE	0x28000
-#define DSP_IPI_24XX_PHYS	OMAP2420_DSP_IPI_BASE	/* 0x59000000 */
-#define DSP_IPI_24XX_VIRT	0xe1000000
-#define DSP_IPI_24XX_SIZE	SZ_4K
-#define DSP_MMU_24XX_PHYS	OMAP2420_DSP_MMU_BASE	/* 0x5a000000 */
-#define DSP_MMU_24XX_VIRT	0xe2000000
-#define DSP_MMU_24XX_SIZE	SZ_4K
-
-#elif defined(CONFIG_ARCH_OMAP3)
-
-/* We map both L3 and L4 on OMAP3 */
-#define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 */
-#define L3_34XX_VIRT		0xf8000000
-#define L3_34XX_SIZE		SZ_1M   /* 44kB of 128MB used, want 1MB sect */
-
-#define L4_34XX_PHYS		L4_34XX_BASE	/* 0x48000000 */
-#define L4_34XX_VIRT		0xd8000000
-#define L4_34XX_SIZE		SZ_4M   /* 1MB of 128MB used, want 1MB sect */
-
-/*
- * Need to look at the Size 4M for L4.
- * VPOM3430 was not working for Int controller
- */
-
-#define L4_WK_34XX_PHYS		L4_WK_34XX_BASE /* 0x48300000 */
-#define L4_WK_34XX_VIRT		0xd8300000
-#define L4_WK_34XX_SIZE		SZ_1M
-
-#define L4_PER_34XX_PHYS	L4_PER_34XX_BASE /* 0x49000000 */
-#define L4_PER_34XX_VIRT	0xd9000000
-#define L4_PER_34XX_SIZE	SZ_1M
-
-#define L4_EMU_34XX_PHYS	L4_EMU_34XX_BASE /* 0x54000000 */
-#define L4_EMU_34XX_VIRT	0xe4000000
-#define L4_EMU_34XX_SIZE	SZ_64M
-
-#define OMAP34XX_GPMC_PHYS	OMAP34XX_GPMC_BASE /* 0x6E000000 */
-#define OMAP34XX_GPMC_VIRT	0xFE000000
-#define OMAP34XX_GPMC_SIZE	SZ_1M
-
-#define OMAP343X_SMS_PHYS	OMAP343X_SMS_BASE /* 0x6C000000 */
-#define OMAP343X_SMS_VIRT	0xFC000000
-#define OMAP343X_SMS_SIZE	SZ_1M
-
-#define OMAP343X_SDRC_PHYS	OMAP343X_SDRC_BASE /* 0x6D000000 */
-#define OMAP343X_SDRC_VIRT	0xFD000000
-#define OMAP343X_SDRC_SIZE	SZ_1M
-
-
-#define IO_OFFSET		0x90000000
-#define IO_ADDRESS(pa)		((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_p2v(pa)		((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_v2p(va)		((va) - IO_OFFSET)/* Works for L3 and L4 */
-
-/* DSP */
-#define DSP_MEM_34XX_PHYS	OMAP34XX_DSP_MEM_BASE	/* 0x58000000 */
-#define DSP_MEM_34XX_VIRT	0xe0000000
-#define DSP_MEM_34XX_SIZE	0x28000
-#define DSP_IPI_34XX_PHYS	OMAP34XX_DSP_IPI_BASE	/* 0x59000000 */
-#define DSP_IPI_34XX_VIRT	0xe1000000
-#define DSP_IPI_34XX_SIZE	SZ_4K
-#define DSP_MMU_34XX_PHYS	OMAP34XX_DSP_MMU_BASE	/* 0x5a000000 */
-#define DSP_MMU_34XX_VIRT	0xe2000000
-#define DSP_MMU_34XX_SIZE	SZ_4K
-
-#endif
-
-#ifndef __ASSEMBLER__
-
-/*
- * Functions to access the OMAP IO region
- *
- * NOTE: - Use omap_read/write[bwl] for physical register addresses
- *	 - Use __raw_read/write[bwl]() for virtual register addresses
- *	 - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
- *	 - DO NOT use hardcoded virtual addresses to allow changing the
- *	   IO address space again if needed
- */
-#define omap_readb(a)		(*(volatile unsigned char  *)IO_ADDRESS(a))
-#define omap_readw(a)		(*(volatile unsigned short *)IO_ADDRESS(a))
-#define omap_readl(a)		(*(volatile unsigned int   *)IO_ADDRESS(a))
-
-#define omap_writeb(v,a)	(*(volatile unsigned char  *)IO_ADDRESS(a) = (v))
-#define omap_writew(v,a)	(*(volatile unsigned short *)IO_ADDRESS(a) = (v))
-#define omap_writel(v,a)	(*(volatile unsigned int   *)IO_ADDRESS(a) = (v))
-
-extern void omap1_map_common_io(void);
-extern void omap1_init_common_hw(void);
-
-extern void omap2_map_common_io(void);
-extern void omap2_init_common_hw(void);
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-omap/irda.h b/include/asm-arm/arch-omap/irda.h
deleted file mode 100644
index 96bb12f..0000000
--- a/include/asm-arm/arch-omap/irda.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/irda.h
- *
- *  Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_ARCH_IRDA_H
-#define ASMARM_ARCH_IRDA_H
-
-/* board specific transceiver capabilities */
-
-#define IR_SEL		1	/* Selects IrDA */
-#define IR_SIRMODE	2
-#define IR_FIRMODE	4
-#define IR_MIRMODE	8
-
-struct omap_irda_config {
-	int transceiver_cap;
-	int (*transceiver_mode)(struct device *dev, int mode);
-	int (*select_irda)(struct device *dev, int state);
-	/* Very specific to the needs of some platforms (h3,h4)
-	 * having calls which can sleep in irda_set_speed.
-	 */
-	struct delayed_work gpio_expa;
-	int rx_channel;
-	int tx_channel;
-	unsigned long dest_start;
-	unsigned long src_start;
-	int tx_trigger;
-	int rx_trigger;
-	int mode;
-};
-
-#endif
diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h
deleted file mode 100644
index afbf1e8..0000000
--- a/include/asm-arm/arch-omap/irqs.h
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/irqs.h
- *
- *  Copyright (C) Greg Lonnon 2001
- *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
- *	 are different.
- */
-
-#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
-#define __ASM_ARCH_OMAP15XX_IRQS_H
-
-/*
- * IRQ numbers for interrupt handler 1
- *
- * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
- *
- */
-#define INT_CAMERA		1
-#define INT_FIQ			3
-#define INT_RTDX		6
-#define INT_DSP_MMU_ABORT	7
-#define INT_HOST		8
-#define INT_ABORT		9
-#define INT_BRIDGE_PRIV		13
-#define INT_GPIO_BANK1		14
-#define INT_UART3		15
-#define INT_TIMER3		16
-#define INT_DMA_CH0_6		19
-#define INT_DMA_CH1_7		20
-#define INT_DMA_CH2_8		21
-#define INT_DMA_CH3		22
-#define INT_DMA_CH4		23
-#define INT_DMA_CH5		24
-#define INT_DMA_LCD		25
-#define INT_TIMER1		26
-#define INT_WD_TIMER		27
-#define INT_BRIDGE_PUB		28
-#define INT_TIMER2		30
-#define INT_LCD_CTRL		31
-
-/*
- * OMAP-1510 specific IRQ numbers for interrupt handler 1
- */
-#define INT_1510_IH2_IRQ	0
-#define INT_1510_RES2		2
-#define INT_1510_SPI_TX		4
-#define INT_1510_SPI_RX		5
-#define INT_1510_DSP_MAILBOX1	10
-#define INT_1510_DSP_MAILBOX2	11
-#define INT_1510_RES12		12
-#define INT_1510_LB_MMU		17
-#define INT_1510_RES18		18
-#define INT_1510_LOCAL_BUS	29
-
-/*
- * OMAP-1610 specific IRQ numbers for interrupt handler 1
- */
-#define INT_1610_IH2_IRQ	0
-#define INT_1610_IH2_FIQ	2
-#define INT_1610_McBSP2_TX	4
-#define INT_1610_McBSP2_RX	5
-#define INT_1610_DSP_MAILBOX1	10
-#define INT_1610_DSP_MAILBOX2	11
-#define INT_1610_LCD_LINE	12
-#define INT_1610_GPTIMER1	17
-#define INT_1610_GPTIMER2	18
-#define INT_1610_SSR_FIFO_0	29
-
-/*
- * OMAP-730 specific IRQ numbers for interrupt handler 1
- */
-#define INT_730_IH2_FIQ		0
-#define INT_730_IH2_IRQ		1
-#define INT_730_USB_NON_ISO	2
-#define INT_730_USB_ISO		3
-#define INT_730_ICR		4
-#define INT_730_EAC		5
-#define INT_730_GPIO_BANK1	6
-#define INT_730_GPIO_BANK2	7
-#define INT_730_GPIO_BANK3	8
-#define INT_730_McBSP2TX	10
-#define INT_730_McBSP2RX	11
-#define INT_730_McBSP2RX_OVF	12
-#define INT_730_LCD_LINE	14
-#define INT_730_GSM_PROTECT	15
-#define INT_730_TIMER3		16
-#define INT_730_GPIO_BANK5	17
-#define INT_730_GPIO_BANK6	18
-#define INT_730_SPGIO_WR	29
-
-/*
- * IRQ numbers for interrupt handler 2
- *
- * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
- */
-#define IH2_BASE		32
-
-#define INT_KEYBOARD		(1 + IH2_BASE)
-#define INT_uWireTX		(2 + IH2_BASE)
-#define INT_uWireRX		(3 + IH2_BASE)
-#define INT_I2C			(4 + IH2_BASE)
-#define INT_MPUIO		(5 + IH2_BASE)
-#define INT_USB_HHC_1		(6 + IH2_BASE)
-#define INT_McBSP3TX		(10 + IH2_BASE)
-#define INT_McBSP3RX		(11 + IH2_BASE)
-#define INT_McBSP1TX		(12 + IH2_BASE)
-#define INT_McBSP1RX		(13 + IH2_BASE)
-#define INT_UART1		(14 + IH2_BASE)
-#define INT_UART2		(15 + IH2_BASE)
-#define INT_BT_MCSI1TX		(16 + IH2_BASE)
-#define INT_BT_MCSI1RX		(17 + IH2_BASE)
-#define INT_USB_W2FC		(20 + IH2_BASE)
-#define INT_1WIRE		(21 + IH2_BASE)
-#define INT_OS_TIMER		(22 + IH2_BASE)
-#define INT_MMC			(23 + IH2_BASE)
-#define INT_GAUGE_32K		(24 + IH2_BASE)
-#define INT_RTC_TIMER		(25 + IH2_BASE)
-#define INT_RTC_ALARM		(26 + IH2_BASE)
-#define INT_MEM_STICK		(27 + IH2_BASE)
-
-/*
- * OMAP-1510 specific IRQ numbers for interrupt handler 2
- */
-#define INT_1510_DSP_MMU	(28 + IH2_BASE)
-#define INT_1510_COM_SPI_RO	(31 + IH2_BASE)
-
-/*
- * OMAP-1610 specific IRQ numbers for interrupt handler 2
- */
-#define INT_1610_FAC		(0 + IH2_BASE)
-#define INT_1610_USB_HHC_2	(7 + IH2_BASE)
-#define INT_1610_USB_OTG	(8 + IH2_BASE)
-#define INT_1610_SoSSI		(9 + IH2_BASE)
-#define INT_1610_SoSSI_MATCH	(19 + IH2_BASE)
-#define INT_1610_DSP_MMU	(28 + IH2_BASE)
-#define INT_1610_McBSP2RX_OF	(31 + IH2_BASE)
-#define INT_1610_STI		(32 + IH2_BASE)
-#define INT_1610_STI_WAKEUP	(33 + IH2_BASE)
-#define INT_1610_GPTIMER3	(34 + IH2_BASE)
-#define INT_1610_GPTIMER4	(35 + IH2_BASE)
-#define INT_1610_GPTIMER5	(36 + IH2_BASE)
-#define INT_1610_GPTIMER6	(37 + IH2_BASE)
-#define INT_1610_GPTIMER7	(38 + IH2_BASE)
-#define INT_1610_GPTIMER8	(39 + IH2_BASE)
-#define INT_1610_GPIO_BANK2	(40 + IH2_BASE)
-#define INT_1610_GPIO_BANK3	(41 + IH2_BASE)
-#define INT_1610_MMC2		(42 + IH2_BASE)
-#define INT_1610_CF		(43 + IH2_BASE)
-#define INT_1610_WAKE_UP_REQ	(46 + IH2_BASE)
-#define INT_1610_GPIO_BANK4	(48 + IH2_BASE)
-#define INT_1610_SPI		(49 + IH2_BASE)
-#define INT_1610_DMA_CH6	(53 + IH2_BASE)
-#define INT_1610_DMA_CH7	(54 + IH2_BASE)
-#define INT_1610_DMA_CH8	(55 + IH2_BASE)
-#define INT_1610_DMA_CH9	(56 + IH2_BASE)
-#define INT_1610_DMA_CH10	(57 + IH2_BASE)
-#define INT_1610_DMA_CH11	(58 + IH2_BASE)
-#define INT_1610_DMA_CH12	(59 + IH2_BASE)
-#define INT_1610_DMA_CH13	(60 + IH2_BASE)
-#define INT_1610_DMA_CH14	(61 + IH2_BASE)
-#define INT_1610_DMA_CH15	(62 + IH2_BASE)
-#define INT_1610_NAND		(63 + IH2_BASE)
-
-/*
- * OMAP-730 specific IRQ numbers for interrupt handler 2
- */
-#define INT_730_HW_ERRORS	(0 + IH2_BASE)
-#define INT_730_NFIQ_PWR_FAIL	(1 + IH2_BASE)
-#define INT_730_CFCD		(2 + IH2_BASE)
-#define INT_730_CFIREQ		(3 + IH2_BASE)
-#define INT_730_I2C		(4 + IH2_BASE)
-#define INT_730_PCC		(5 + IH2_BASE)
-#define INT_730_MPU_EXT_NIRQ	(6 + IH2_BASE)
-#define INT_730_SPI_100K_1	(7 + IH2_BASE)
-#define INT_730_SYREN_SPI	(8 + IH2_BASE)
-#define INT_730_VLYNQ		(9 + IH2_BASE)
-#define INT_730_GPIO_BANK4	(10 + IH2_BASE)
-#define INT_730_McBSP1TX	(11 + IH2_BASE)
-#define INT_730_McBSP1RX	(12 + IH2_BASE)
-#define INT_730_McBSP1RX_OF	(13 + IH2_BASE)
-#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE)
-#define INT_730_UART_MODEM_1	(15 + IH2_BASE)
-#define INT_730_MCSI		(16 + IH2_BASE)
-#define INT_730_uWireTX		(17 + IH2_BASE)
-#define INT_730_uWireRX		(18 + IH2_BASE)
-#define INT_730_SMC_CD		(19 + IH2_BASE)
-#define INT_730_SMC_IREQ	(20 + IH2_BASE)
-#define INT_730_HDQ_1WIRE	(21 + IH2_BASE)
-#define INT_730_TIMER32K	(22 + IH2_BASE)
-#define INT_730_MMC_SDIO	(23 + IH2_BASE)
-#define INT_730_UPLD		(24 + IH2_BASE)
-#define INT_730_USB_HHC_1	(27 + IH2_BASE)
-#define INT_730_USB_HHC_2	(28 + IH2_BASE)
-#define INT_730_USB_GENI	(29 + IH2_BASE)
-#define INT_730_USB_OTG		(30 + IH2_BASE)
-#define INT_730_CAMERA_IF	(31 + IH2_BASE)
-#define INT_730_RNG		(32 + IH2_BASE)
-#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE)
-#define INT_730_DBB_RF_EN	(34 + IH2_BASE)
-#define INT_730_MPUIO_KEYPAD	(35 + IH2_BASE)
-#define INT_730_SHA1_MD5	(36 + IH2_BASE)
-#define INT_730_SPI_100K_2	(37 + IH2_BASE)
-#define INT_730_RNG_IDLE	(38 + IH2_BASE)
-#define INT_730_MPUIO		(39 + IH2_BASE)
-#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
-#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE)
-#define INT_730_LLPC_OE_RISING	(42 + IH2_BASE)
-#define INT_730_LLPC_VSYNC	(43 + IH2_BASE)
-#define INT_730_WAKE_UP_REQ	(46 + IH2_BASE)
-#define INT_730_DMA_CH6		(53 + IH2_BASE)
-#define INT_730_DMA_CH7		(54 + IH2_BASE)
-#define INT_730_DMA_CH8		(55 + IH2_BASE)
-#define INT_730_DMA_CH9		(56 + IH2_BASE)
-#define INT_730_DMA_CH10	(57 + IH2_BASE)
-#define INT_730_DMA_CH11	(58 + IH2_BASE)
-#define INT_730_DMA_CH12	(59 + IH2_BASE)
-#define INT_730_DMA_CH13	(60 + IH2_BASE)
-#define INT_730_DMA_CH14	(61 + IH2_BASE)
-#define INT_730_DMA_CH15	(62 + IH2_BASE)
-#define INT_730_NAND		(63 + IH2_BASE)
-
-#define INT_24XX_SYS_NIRQ	7
-#define INT_24XX_SDMA_IRQ0	12
-#define INT_24XX_SDMA_IRQ1	13
-#define INT_24XX_SDMA_IRQ2	14
-#define INT_24XX_SDMA_IRQ3	15
-#define INT_24XX_CAM_IRQ	24
-#define INT_24XX_DSS_IRQ	25
-#define INT_24XX_MAIL_U0_MPU	26
-#define INT_24XX_DSP_UMA	27
-#define INT_24XX_DSP_MMU	28
-#define INT_24XX_GPIO_BANK1	29
-#define INT_24XX_GPIO_BANK2	30
-#define INT_24XX_GPIO_BANK3	31
-#define INT_24XX_GPIO_BANK4	32
-#define INT_24XX_GPIO_BANK5	33
-#define INT_24XX_MAIL_U3_MPU	34
-#define INT_24XX_GPTIMER1	37
-#define INT_24XX_GPTIMER2	38
-#define INT_24XX_GPTIMER3	39
-#define INT_24XX_GPTIMER4	40
-#define INT_24XX_GPTIMER5	41
-#define INT_24XX_GPTIMER6	42
-#define INT_24XX_GPTIMER7	43
-#define INT_24XX_GPTIMER8	44
-#define INT_24XX_GPTIMER9	45
-#define INT_24XX_GPTIMER10	46
-#define INT_24XX_GPTIMER11	47
-#define INT_24XX_GPTIMER12	48
-#define INT_24XX_I2C1_IRQ	56
-#define INT_24XX_I2C2_IRQ	57
-#define INT_24XX_MCBSP1_IRQ_TX	59
-#define INT_24XX_MCBSP1_IRQ_RX	60
-#define INT_24XX_MCBSP2_IRQ_TX	62
-#define INT_24XX_MCBSP2_IRQ_RX	63
-#define INT_24XX_UART1_IRQ	72
-#define INT_24XX_UART2_IRQ	73
-#define INT_24XX_UART3_IRQ	74
-#define INT_24XX_USB_IRQ_GEN	75
-#define INT_24XX_USB_IRQ_NISO	76
-#define INT_24XX_USB_IRQ_ISO	77
-#define INT_24XX_USB_IRQ_HGEN	78
-#define INT_24XX_USB_IRQ_HSOF	79
-#define INT_24XX_USB_IRQ_OTG	80
-#define INT_24XX_MMC_IRQ	83
-
-/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
- * 16 MPUIO lines */
-#define OMAP_MAX_GPIO_LINES	192
-#define IH_GPIO_BASE		(128 + IH2_BASE)
-#define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
-#define OMAP_IRQ_END		(IH_MPUIO_BASE + 16)
-
-/* External FPGA handles interrupts on Innovator boards */
-#define	OMAP_FPGA_IRQ_BASE	(OMAP_IRQ_END)
-#ifdef	CONFIG_MACH_OMAP_INNOVATOR
-#define OMAP_FPGA_NR_IRQS	24
-#else
-#define OMAP_FPGA_NR_IRQS	0
-#endif
-#define OMAP_FPGA_IRQ_END	(OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
-
-/* External TWL4030 can handle interrupts on 2430 and 34xx boards */
-#define	TWL4030_IRQ_BASE	(OMAP_FPGA_IRQ_END)
-#ifdef	CONFIG_TWL4030_CORE
-#define	TWL4030_BASE_NR_IRQS	8
-#define	TWL4030_PWR_NR_IRQS	8
-#else
-#define	TWL4030_BASE_NR_IRQS	0
-#define	TWL4030_PWR_NR_IRQS	0
-#endif
-#define TWL4030_IRQ_END		(TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS)
-#define TWL4030_PWR_IRQ_BASE	TWL4030_IRQ_END
-#define	TWL4030_PWR_IRQ_END	(TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS)
-
-/* External TWL4030 gpio interrupts are optional */
-#define TWL4030_GPIO_IRQ_BASE	TWL4030_PWR_IRQ_END
-#ifdef	CONFIG_TWL4030_GPIO
-#define TWL4030_GPIO_NR_IRQS	18
-#else
-#define	TWL4030_GPIO_NR_IRQS	0
-#endif
-#define TWL4030_GPIO_IRQ_END	(TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
-
-/* Total number of interrupts depends on the enabled blocks above */
-#define NR_IRQS			TWL4030_GPIO_IRQ_END
-
-#define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
-
-#ifndef __ASSEMBLY__
-extern void omap_init_irq(void);
-#endif
-
-#include <asm/arch/hardware.h>
-
-#endif
diff --git a/include/asm-arm/arch-omap/keypad.h b/include/asm-arm/arch-omap/keypad.h
deleted file mode 100644
index b7f8307..0000000
--- a/include/asm-arm/arch-omap/keypad.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/keypad.h
- *
- *  Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_ARCH_KEYPAD_H
-#define ASMARM_ARCH_KEYPAD_H
-
-struct omap_kp_platform_data {
-	int rows;
-	int cols;
-	int *keymap;
-	unsigned int keymapsize;
-	unsigned int rep:1;
-	unsigned long delay;
-	unsigned int dbounce:1;
-	/* specific to OMAP242x*/
-	unsigned int *row_gpios;
-	unsigned int *col_gpios;
-};
-
-/* Group (0..3) -- when multiple keys are pressed, only the
- * keys pressed in the same group are considered as pressed. This is
- * in order to workaround certain crappy HW designs that produce ghost
- * keypresses. */
-#define GROUP_0		(0 << 16)
-#define GROUP_1		(1 << 16)
-#define GROUP_2		(2 << 16)
-#define GROUP_3		(3 << 16)
-#define GROUP_MASK	GROUP_3
-
-#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
-
-#endif
-
diff --git a/include/asm-arm/arch-omap/led.h b/include/asm-arm/arch-omap/led.h
deleted file mode 100644
index f3acae2..0000000
--- a/include/asm-arm/arch-omap/led.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/led.h
- *
- *  Copyright (C) 2006 Samsung Electronics
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_ARCH_LED_H
-#define ASMARM_ARCH_LED_H
-
-struct omap_led_config {
-	struct led_classdev	cdev;
-	s16			gpio;
-};
-
-struct omap_led_platform_data {
-	s16			nr_leds;
-	struct omap_led_config	*leds;
-};
-
-#endif
diff --git a/include/asm-arm/arch-omap/mcbsp.h b/include/asm-arm/arch-omap/mcbsp.h
deleted file mode 100644
index 3da459a..0000000
--- a/include/asm-arm/arch-omap/mcbsp.h
+++ /dev/null
@@ -1,380 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/mcbsp.h
- *
- * Defines for Multi-Channel Buffered Serial Port
- *
- * Copyright (C) 2002 RidgeRun, Inc.
- * Author: Steve Johnson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#ifndef __ASM_ARCH_OMAP_MCBSP_H
-#define __ASM_ARCH_OMAP_MCBSP_H
-
-#include <linux/completion.h>
-#include <linux/spinlock.h>
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/clock.h>
-
-#define OMAP730_MCBSP1_BASE	0xfffb1000
-#define OMAP730_MCBSP2_BASE	0xfffb1800
-
-#define OMAP1510_MCBSP1_BASE	0xe1011800
-#define OMAP1510_MCBSP2_BASE	0xfffb1000
-#define OMAP1510_MCBSP3_BASE	0xe1017000
-
-#define OMAP1610_MCBSP1_BASE	0xe1011800
-#define OMAP1610_MCBSP2_BASE	0xfffb1000
-#define OMAP1610_MCBSP3_BASE	0xe1017000
-
-#define OMAP24XX_MCBSP1_BASE	0x48074000
-#define OMAP24XX_MCBSP2_BASE	0x48076000
-
-#define OMAP34XX_MCBSP1_BASE	0x48074000
-#define OMAP34XX_MCBSP2_BASE	0x49022000
-
-#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
-
-#define OMAP_MCBSP_REG_DRR2	0x00
-#define OMAP_MCBSP_REG_DRR1	0x02
-#define OMAP_MCBSP_REG_DXR2	0x04
-#define OMAP_MCBSP_REG_DXR1	0x06
-#define OMAP_MCBSP_REG_SPCR2	0x08
-#define OMAP_MCBSP_REG_SPCR1	0x0a
-#define OMAP_MCBSP_REG_RCR2	0x0c
-#define OMAP_MCBSP_REG_RCR1	0x0e
-#define OMAP_MCBSP_REG_XCR2	0x10
-#define OMAP_MCBSP_REG_XCR1	0x12
-#define OMAP_MCBSP_REG_SRGR2	0x14
-#define OMAP_MCBSP_REG_SRGR1	0x16
-#define OMAP_MCBSP_REG_MCR2	0x18
-#define OMAP_MCBSP_REG_MCR1	0x1a
-#define OMAP_MCBSP_REG_RCERA	0x1c
-#define OMAP_MCBSP_REG_RCERB	0x1e
-#define OMAP_MCBSP_REG_XCERA	0x20
-#define OMAP_MCBSP_REG_XCERB	0x22
-#define OMAP_MCBSP_REG_PCR0	0x24
-#define OMAP_MCBSP_REG_RCERC	0x26
-#define OMAP_MCBSP_REG_RCERD	0x28
-#define OMAP_MCBSP_REG_XCERC	0x2A
-#define OMAP_MCBSP_REG_XCERD	0x2C
-#define OMAP_MCBSP_REG_RCERE	0x2E
-#define OMAP_MCBSP_REG_RCERF	0x30
-#define OMAP_MCBSP_REG_XCERE	0x32
-#define OMAP_MCBSP_REG_XCERF	0x34
-#define OMAP_MCBSP_REG_RCERG	0x36
-#define OMAP_MCBSP_REG_RCERH	0x38
-#define OMAP_MCBSP_REG_XCERG	0x3A
-#define OMAP_MCBSP_REG_XCERH	0x3C
-
-#define OMAP_MAX_MCBSP_COUNT	3
-#define MAX_MCBSP_CLOCKS	3
-
-#define AUDIO_MCBSP_DATAWRITE	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
-#define AUDIO_MCBSP_DATAREAD	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
-
-#define AUDIO_MCBSP		OMAP_MCBSP1
-#define AUDIO_DMA_TX		OMAP_DMA_MCBSP1_TX
-#define AUDIO_DMA_RX		OMAP_DMA_MCBSP1_RX
-
-#elif defined(CONFIG_ARCH_OMAP24XX)
-
-#define OMAP_MCBSP_REG_DRR2	0x00
-#define OMAP_MCBSP_REG_DRR1	0x04
-#define OMAP_MCBSP_REG_DXR2	0x08
-#define OMAP_MCBSP_REG_DXR1	0x0C
-#define OMAP_MCBSP_REG_SPCR2	0x10
-#define OMAP_MCBSP_REG_SPCR1	0x14
-#define OMAP_MCBSP_REG_RCR2	0x18
-#define OMAP_MCBSP_REG_RCR1	0x1C
-#define OMAP_MCBSP_REG_XCR2	0x20
-#define OMAP_MCBSP_REG_XCR1	0x24
-#define OMAP_MCBSP_REG_SRGR2	0x28
-#define OMAP_MCBSP_REG_SRGR1	0x2C
-#define OMAP_MCBSP_REG_MCR2	0x30
-#define OMAP_MCBSP_REG_MCR1	0x34
-#define OMAP_MCBSP_REG_RCERA	0x38
-#define OMAP_MCBSP_REG_RCERB	0x3C
-#define OMAP_MCBSP_REG_XCERA	0x40
-#define OMAP_MCBSP_REG_XCERB	0x44
-#define OMAP_MCBSP_REG_PCR0	0x48
-#define OMAP_MCBSP_REG_RCERC	0x4C
-#define OMAP_MCBSP_REG_RCERD	0x50
-#define OMAP_MCBSP_REG_XCERC	0x54
-#define OMAP_MCBSP_REG_XCERD	0x58
-#define OMAP_MCBSP_REG_RCERE	0x5C
-#define OMAP_MCBSP_REG_RCERF	0x60
-#define OMAP_MCBSP_REG_XCERE	0x64
-#define OMAP_MCBSP_REG_XCERF	0x68
-#define OMAP_MCBSP_REG_RCERG	0x6C
-#define OMAP_MCBSP_REG_RCERH	0x70
-#define OMAP_MCBSP_REG_XCERG	0x74
-#define OMAP_MCBSP_REG_XCERH	0x78
-
-#define OMAP_MAX_MCBSP_COUNT	2
-#define MAX_MCBSP_CLOCKS	2
-
-#define AUDIO_MCBSP_DATAWRITE	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
-#define AUDIO_MCBSP_DATAREAD	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
-
-#define AUDIO_MCBSP		OMAP_MCBSP2
-#define AUDIO_DMA_TX		OMAP24XX_DMA_MCBSP2_TX
-#define AUDIO_DMA_RX		OMAP24XX_DMA_MCBSP2_RX
-
-#endif
-
-#define OMAP_MCBSP_READ(base, reg)		__raw_readw((base) + OMAP_MCBSP_REG_##reg)
-#define OMAP_MCBSP_WRITE(base, reg, val)	__raw_writew((val), (base) + OMAP_MCBSP_REG_##reg)
-
-
-/************************** McBSP SPCR1 bit definitions ***********************/
-#define RRST			0x0001
-#define RRDY			0x0002
-#define RFULL			0x0004
-#define RSYNC_ERR		0x0008
-#define RINTM(value)		((value)<<4)	/* bits 4:5 */
-#define ABIS			0x0040
-#define DXENA			0x0080
-#define CLKSTP(value)		((value)<<11)	/* bits 11:12 */
-#define RJUST(value)		((value)<<13)	/* bits 13:14 */
-#define DLB			0x8000
-
-/************************** McBSP SPCR2 bit definitions ***********************/
-#define XRST		0x0001
-#define XRDY		0x0002
-#define XEMPTY		0x0004
-#define XSYNC_ERR	0x0008
-#define XINTM(value)	((value)<<4)		/* bits 4:5 */
-#define GRST		0x0040
-#define FRST		0x0080
-#define SOFT		0x0100
-#define FREE		0x0200
-
-/************************** McBSP PCR bit definitions *************************/
-#define CLKRP		0x0001
-#define CLKXP		0x0002
-#define FSRP		0x0004
-#define FSXP		0x0008
-#define DR_STAT		0x0010
-#define DX_STAT		0x0020
-#define CLKS_STAT	0x0040
-#define SCLKME		0x0080
-#define CLKRM		0x0100
-#define CLKXM		0x0200
-#define FSRM		0x0400
-#define FSXM		0x0800
-#define RIOEN		0x1000
-#define XIOEN		0x2000
-#define IDLE_EN		0x4000
-
-/************************** McBSP RCR1 bit definitions ************************/
-#define RWDLEN1(value)		((value)<<5)	/* Bits 5:7 */
-#define RFRLEN1(value)		((value)<<8)	/* Bits 8:14 */
-
-/************************** McBSP XCR1 bit definitions ************************/
-#define XWDLEN1(value)		((value)<<5)	/* Bits 5:7 */
-#define XFRLEN1(value)		((value)<<8)	/* Bits 8:14 */
-
-/*************************** McBSP RCR2 bit definitions ***********************/
-#define RDATDLY(value)		(value)		/* Bits 0:1 */
-#define RFIG			0x0004
-#define RCOMPAND(value)		((value)<<3)	/* Bits 3:4 */
-#define RWDLEN2(value)		((value)<<5)	/* Bits 5:7 */
-#define RFRLEN2(value)		((value)<<8)	/* Bits 8:14 */
-#define RPHASE			0x8000
-
-/*************************** McBSP XCR2 bit definitions ***********************/
-#define XDATDLY(value)		(value)		/* Bits 0:1 */
-#define XFIG			0x0004
-#define XCOMPAND(value)		((value)<<3)	/* Bits 3:4 */
-#define XWDLEN2(value)		((value)<<5)	/* Bits 5:7 */
-#define XFRLEN2(value)		((value)<<8)	/* Bits 8:14 */
-#define XPHASE			0x8000
-
-/************************* McBSP SRGR1 bit definitions ************************/
-#define CLKGDV(value)		(value)		/* Bits 0:7 */
-#define FWID(value)		((value)<<8)	/* Bits 8:15 */
-
-/************************* McBSP SRGR2 bit definitions ************************/
-#define FPER(value)		(value)		/* Bits 0:11 */
-#define FSGM			0x1000
-#define CLKSM			0x2000
-#define CLKSP			0x4000
-#define GSYNC			0x8000
-
-/************************* McBSP MCR1 bit definitions *************************/
-#define RMCM			0x0001
-#define RCBLK(value)		((value)<<2)	/* Bits 2:4 */
-#define RPABLK(value)		((value)<<5)	/* Bits 5:6 */
-#define RPBBLK(value)		((value)<<7)	/* Bits 7:8 */
-
-/************************* McBSP MCR2 bit definitions *************************/
-#define XMCM(value)		(value)		/* Bits 0:1 */
-#define XCBLK(value)		((value)<<2)	/* Bits 2:4 */
-#define XPABLK(value)		((value)<<5)	/* Bits 5:6 */
-#define XPBBLK(value)		((value)<<7)	/* Bits 7:8 */
-
-
-/* we don't do multichannel for now */
-struct omap_mcbsp_reg_cfg {
-	u16 spcr2;
-	u16 spcr1;
-	u16 rcr2;
-	u16 rcr1;
-	u16 xcr2;
-	u16 xcr1;
-	u16 srgr2;
-	u16 srgr1;
-	u16 mcr2;
-	u16 mcr1;
-	u16 pcr0;
-	u16 rcerc;
-	u16 rcerd;
-	u16 xcerc;
-	u16 xcerd;
-	u16 rcere;
-	u16 rcerf;
-	u16 xcere;
-	u16 xcerf;
-	u16 rcerg;
-	u16 rcerh;
-	u16 xcerg;
-	u16 xcerh;
-};
-
-typedef enum {
-	OMAP_MCBSP1 = 0,
-	OMAP_MCBSP2,
-	OMAP_MCBSP3,
-} omap_mcbsp_id;
-
-typedef int __bitwise omap_mcbsp_io_type_t;
-#define OMAP_MCBSP_IRQ_IO ((__force omap_mcbsp_io_type_t) 1)
-#define OMAP_MCBSP_POLL_IO ((__force omap_mcbsp_io_type_t) 2)
-
-typedef enum {
-	OMAP_MCBSP_WORD_8 = 0,
-	OMAP_MCBSP_WORD_12,
-	OMAP_MCBSP_WORD_16,
-	OMAP_MCBSP_WORD_20,
-	OMAP_MCBSP_WORD_24,
-	OMAP_MCBSP_WORD_32,
-} omap_mcbsp_word_length;
-
-typedef enum {
-	OMAP_MCBSP_CLK_RISING = 0,
-	OMAP_MCBSP_CLK_FALLING,
-} omap_mcbsp_clk_polarity;
-
-typedef enum {
-	OMAP_MCBSP_FS_ACTIVE_HIGH = 0,
-	OMAP_MCBSP_FS_ACTIVE_LOW,
-} omap_mcbsp_fs_polarity;
-
-typedef enum {
-	OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0,
-	OMAP_MCBSP_CLK_STP_MODE_DELAY,
-} omap_mcbsp_clk_stp_mode;
-
-
-/******* SPI specific mode **********/
-typedef enum {
-	OMAP_MCBSP_SPI_MASTER = 0,
-	OMAP_MCBSP_SPI_SLAVE,
-} omap_mcbsp_spi_mode;
-
-struct omap_mcbsp_spi_cfg {
-	omap_mcbsp_spi_mode		spi_mode;
-	omap_mcbsp_clk_polarity		rx_clock_polarity;
-	omap_mcbsp_clk_polarity		tx_clock_polarity;
-	omap_mcbsp_fs_polarity		fsx_polarity;
-	u8				clk_div;
-	omap_mcbsp_clk_stp_mode		clk_stp_mode;
-	omap_mcbsp_word_length		word_length;
-};
-
-/* Platform specific configuration */
-struct omap_mcbsp_ops {
-	void (*request)(unsigned int);
-	void (*free)(unsigned int);
-	int (*check)(unsigned int);
-};
-
-struct omap_mcbsp_platform_data {
-	u32 virt_base;
-	u8 dma_rx_sync, dma_tx_sync;
-	u16 rx_irq, tx_irq;
-	struct omap_mcbsp_ops *ops;
-	char const *clk_name;
-};
-
-struct omap_mcbsp {
-	struct device *dev;
-	u32 io_base;
-	u8 id;
-	u8 free;
-	omap_mcbsp_word_length rx_word_length;
-	omap_mcbsp_word_length tx_word_length;
-
-	omap_mcbsp_io_type_t io_type; /* IRQ or poll */
-	/* IRQ based TX/RX */
-	int rx_irq;
-	int tx_irq;
-
-	/* DMA stuff */
-	u8 dma_rx_sync;
-	short dma_rx_lch;
-	u8 dma_tx_sync;
-	short dma_tx_lch;
-
-	/* Completion queues */
-	struct completion tx_irq_completion;
-	struct completion rx_irq_completion;
-	struct completion tx_dma_completion;
-	struct completion rx_dma_completion;
-
-	/* Protect the field .free, while checking if the mcbsp is in use */
-	spinlock_t lock;
-	struct omap_mcbsp_platform_data *pdata;
-	struct clk *clk;
-};
-
-int omap_mcbsp_init(void);
-void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
-					int size);
-void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
-int omap_mcbsp_request(unsigned int id);
-void omap_mcbsp_free(unsigned int id);
-void omap_mcbsp_start(unsigned int id);
-void omap_mcbsp_stop(unsigned int id);
-void omap_mcbsp_xmit_word(unsigned int id, u32 word);
-u32 omap_mcbsp_recv_word(unsigned int id);
-
-int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
-int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
-int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word);
-int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word);
-
-
-/* SPI specific API */
-void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg);
-
-/* Polled read/write functions */
-int omap_mcbsp_pollread(unsigned int id, u16 * buf);
-int omap_mcbsp_pollwrite(unsigned int id, u16 buf);
-
-#endif
diff --git a/include/asm-arm/arch-omap/memory.h b/include/asm-arm/arch-omap/memory.h
deleted file mode 100644
index 14cba97..0000000
--- a/include/asm-arm/arch-omap/memory.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/memory.h
- *
- * Memory map for OMAP-1510 and 1610
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * This file was derived from linux/include/asm-arm/arch-intergrator/memory.h
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#if defined(CONFIG_ARCH_OMAP1)
-#define PHYS_OFFSET		UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2)
-#define PHYS_OFFSET		UL(0x80000000)
-#endif
-
-/*
- * Conversion between SDRAM and fake PCI bus, used by USB
- * NOTE: Physical address must be converted to Local Bus address
- *	 on OMAP-1510 only
- */
-
-/*
- * Bus address is physical address, except for OMAP-1510 Local Bus.
- */
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-/*
- * OMAP-1510 bus address is translated into a Local Bus address if the
- * OMAP bus type is lbus. We do the address translation based on the
- * device overriding the defaults used in the dma-mapping API.
- * Note that the is_lbus_device() test is not very efficient on 1510
- * because of the strncmp().
- */
-#ifdef CONFIG_ARCH_OMAP15XX
-
-/*
- * OMAP-1510 Local Bus address offset
- */
-#define OMAP1510_LB_OFFSET	UL(0x30000000)
-
-#define virt_to_lbus(x)		((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
-#define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
-#define is_lbus_device(dev)	(cpu_is_omap15xx() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0))
-
-#define __arch_page_to_dma(dev, page)	({is_lbus_device(dev) ? \
-					(dma_addr_t)virt_to_lbus(page_address(page)) : \
-					(dma_addr_t)__virt_to_bus(page_address(page));})
-
-#define __arch_dma_to_virt(dev, addr)	({is_lbus_device(dev) ? \
-					lbus_to_virt(addr) : \
-					__bus_to_virt(addr);})
-
-#define __arch_virt_to_dma(dev, addr)	({is_lbus_device(dev) ? \
-					virt_to_lbus(addr) : \
-					__virt_to_bus(addr);})
-
-#endif	/* CONFIG_ARCH_OMAP15XX */
-
-/* Override the ARM default */
-#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-
-#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0)
-#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2
-#endif
-
-#define CONSISTENT_DMA_SIZE \
-	(((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024)
-
-#endif
-
-#endif
-
diff --git a/include/asm-arm/arch-omap/menelaus.h b/include/asm-arm/arch-omap/menelaus.h
deleted file mode 100644
index 69ed7ee..0000000
--- a/include/asm-arm/arch-omap/menelaus.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/menelaus.h
- *
- * Functions to access Menelaus power management chip
- */
-
-#ifndef __ASM_ARCH_MENELAUS_H
-#define __ASM_ARCH_MENELAUS_H
-
-struct device;
-
-struct menelaus_platform_data {
-	int (* late_init)(struct device *dev);
-};
-
-extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask),
-					  void *data);
-extern void menelaus_unregister_mmc_callback(void);
-extern int menelaus_set_mmc_opendrain(int slot, int enable);
-extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on);
-
-extern int menelaus_set_vmem(unsigned int mV);
-extern int menelaus_set_vio(unsigned int mV);
-extern int menelaus_set_vmmc(unsigned int mV);
-extern int menelaus_set_vaux(unsigned int mV);
-extern int menelaus_set_vdcdc(int dcdc, unsigned int mV);
-extern int menelaus_set_slot_sel(int enable);
-extern int menelaus_get_slot_pin_states(void);
-extern int menelaus_set_vcore_sw(unsigned int mV);
-extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV);
-
-#define EN_VPLL_SLEEP	(1 << 7)
-#define EN_VMMC_SLEEP	(1 << 6)
-#define EN_VAUX_SLEEP	(1 << 5)
-#define EN_VIO_SLEEP	(1 << 4)
-#define EN_VMEM_SLEEP	(1 << 3)
-#define EN_DC3_SLEEP	(1 << 2)
-#define EN_DC2_SLEEP	(1 << 1)
-#define EN_VC_SLEEP	(1 << 0)
-
-extern int menelaus_set_regulator_sleep(int enable, u32 val);
-
-#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS)
-#define omap_has_menelaus()	1
-#else
-#define omap_has_menelaus()	0
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-omap/mmc.h b/include/asm-arm/arch-omap/mmc.h
deleted file mode 100644
index 7cfc5f2..0000000
--- a/include/asm-arm/arch-omap/mmc.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * MMC definitions for OMAP2
- *
- * Copyright (C) 2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP2_MMC_H
-#define __OMAP2_MMC_H
-
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/mmc/host.h>
-
-#include <asm/arch/board.h>
-
-#define OMAP_MMC_MAX_SLOTS	2
-
-struct omap_mmc_platform_data {
-	struct omap_mmc_conf	conf;
-
-	/* number of slots on board */
-	unsigned nr_slots:2;
-
-	/* set if your board has components or wiring that limits the
-	 * maximum frequency on the MMC bus */
-	unsigned int max_freq;
-
-	/* switch the bus to a new slot */
-	int (* switch_slot)(struct device *dev, int slot);
-	/* initialize board-specific MMC functionality, can be NULL if
-	 * not supported */
-	int (* init)(struct device *dev);
-	void (* cleanup)(struct device *dev);
-	void (* shutdown)(struct device *dev);
-
-	/* To handle board related suspend/resume functionality for MMC */
-	int (*suspend)(struct device *dev, int slot);
-	int (*resume)(struct device *dev, int slot);
-
-	struct omap_mmc_slot_data {
-		int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
-		int (* set_power)(struct device *dev, int slot, int power_on, int vdd);
-		int (* get_ro)(struct device *dev, int slot);
-
-		/* return MMC cover switch state, can be NULL if not supported.
-		 *
-		 * possible return values:
-		 *   0 - open
-		 *   1 - closed
-		 */
-		int (* get_cover_state)(struct device *dev, int slot);
-
-		const char *name;
-		u32 ocr_mask;
-
-		/* Card detection IRQs */
-		int card_detect_irq;
-		int (* card_detect)(int irq);
-
-		unsigned int ban_openended:1;
-
-	} slots[OMAP_MMC_MAX_SLOTS];
-};
-
-extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info);
-
-/* called from board-specific card detection service routine */
-extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
-
-#endif
diff --git a/include/asm-arm/arch-omap/mtd-xip.h b/include/asm-arm/arch-omap/mtd-xip.h
deleted file mode 100644
index f4714b5..0000000
--- a/include/asm-arm/arch-omap/mtd-xip.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions.
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- *
- * Author: Vladimir Barinov <vbarinov@ru.mvista.com>
- *
- * (c) 2005 MontaVista Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is
- * licensed "as is" without any warranty of any kind, whether express or
- * implied.
- */
-
-#ifndef __ARCH_OMAP_MTD_XIP_H__
-#define __ARCH_OMAP_MTD_XIP_H__
-
-#include <asm/arch/hardware.h>
-#define OMAP_MPU_TIMER_BASE	(0xfffec500)
-#define OMAP_MPU_TIMER_OFFSET	0x100
-
-typedef struct {
-	u32 cntl;			/* CNTL_TIMER, R/W */
-	u32 load_tim;			/* LOAD_TIM,   W */
-	u32 read_tim;			/* READ_TIM,   R */
-} xip_omap_mpu_timer_regs_t;
-
-#define xip_omap_mpu_timer_base(n)					\
-((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
-	(n)*OMAP_MPU_TIMER_OFFSET))
-
-static inline unsigned long xip_omap_mpu_timer_read(int nr)
-{
-	volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr);
-	return timer->read_tim;
-}
-
-#define xip_irqpending()	\
-	(omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR))
-#define xip_currtime()		(~xip_omap_mpu_timer_read(0))
-
-/*
- * It's permitted to do approxmation for xip_elapsed_since macro
- * (see linux/mtd/xip.h)
- */
-
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
-#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7)
-#else
-#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6)
-#endif
-
-/*
- * xip_cpu_idle() is used when waiting for a delay equal or larger than
- * the system timer tick period.  This should put the CPU into idle mode
- * to save power and to be woken up only when some interrupts are pending.
- * As above, this should not rely upon standard kernel code.
- */
-
-#define xip_cpu_idle()  asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1))
-
-#endif /* __ARCH_OMAP_MTD_XIP_H__ */
diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h
deleted file mode 100644
index ff9a5b5..0000000
--- a/include/asm-arm/arch-omap/mux.h
+++ /dev/null
@@ -1,615 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/mux.h
- *
- * Table of the Omap register configurations for the FUNC_MUX and
- * PULL_DWN combinations.
- *
- * Copyright (C) 2004 - 2008 Texas Instruments Inc.
- * Copyright (C) 2003 - 2008 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * NOTE: Please use the following naming style for new pin entries.
- *	 For example, W8_1610_MMC2_DAT0, where:
- *	 - W8	     = ball
- *	 - 1610	     = 1510 or 1610, none if common for both 1510 and 1610
- *	 - MMC2_DAT0 = function
- */
-
-#ifndef __ASM_ARCH_MUX_H
-#define __ASM_ARCH_MUX_H
-
-#define PU_PD_SEL_NA		0	/* No pu_pd reg available */
-#define PULL_DWN_CTRL_NA	0	/* No pull-down control needed */
-
-#ifdef	CONFIG_OMAP_MUX_DEBUG
-#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
-					.mux_reg = FUNC_MUX_CTRL_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG(reg, bit, status)	.pull_name = "PULL_DWN_CTRL_"#reg, \
-					.pull_reg = PULL_DWN_CTRL_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#define PU_PD_REG(reg, status)		.pu_pd_name = "PU_PD_SEL_"#reg, \
-					.pu_pd_reg = PU_PD_SEL_##reg, \
-					.pu_pd_val = status,
-
-#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
-					.mux_reg = OMAP730_IO_CONF_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG_730(reg, bit, status)	.pull_name = "OMAP730_IO_CONF_"#reg, \
-					.pull_reg = OMAP730_IO_CONF_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#else
-
-#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG(reg, bit, status)	.pull_reg = PULL_DWN_CTRL_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
-					.pu_pd_val = status,
-
-#define MUX_REG_730(reg, mode_offset, mode) \
-					.mux_reg = OMAP730_IO_CONF_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG_730(reg, bit, status)	.pull_reg = OMAP730_IO_CONF_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#endif /* CONFIG_OMAP_MUX_DEBUG */
-
-#define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
-		pull_reg, pull_bit, pull_status,	\
-		pu_pd_reg, pu_pd_status, debug_status)	\
-{							\
-	.name =	 desc,					\
-	.debug = debug_status,				\
-	MUX_REG(mux_reg, mode_offset, mode)		\
-	PULL_REG(pull_reg, pull_bit, pull_status)	\
-	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
-},
-
-
-/*
- * OMAP730 has a slightly different config for the pin mux.
- * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
- *   not the FUNC_MUX_CTRL_x regs from hardware.h
- * - for pull-up/down, only has one enable bit which is is in the same register
- *   as mux config
- */
-#define MUX_CFG_730(desc, mux_reg, mode_offset, mode,	\
-		   pull_bit, pull_status, debug_status)\
-{							\
-	.name =	 desc,					\
-	.debug = debug_status,				\
-	MUX_REG_730(mux_reg, mode_offset, mode)		\
-	PULL_REG_730(mux_reg, pull_bit, pull_status)	\
-	PU_PD_REG(NA, 0)		\
-},
-
-#define MUX_CFG_24XX(desc, reg_offset, mode,			\
-				pull_en, pull_mode, dbg)	\
-{								\
-	.name		= desc,					\
-	.debug		= dbg,					\
-	.mux_reg	= reg_offset,				\
-	.mask		= mode,					\
-	.pull_val	= pull_en,				\
-	.pu_pd_val	= pull_mode,				\
-},
-
-
-#define PULL_DISABLED	0
-#define PULL_ENABLED	1
-
-#define PULL_DOWN	0
-#define PULL_UP		1
-
-struct pin_config {
-	char *name;
-	unsigned char busy;
-	unsigned char debug;
-
-	const char *mux_reg_name;
-	const unsigned int mux_reg;
-	const unsigned char mask_offset;
-	const unsigned char mask;
-
-	const char *pull_name;
-	const unsigned int pull_reg;
-	const unsigned char pull_val;
-	const unsigned char pull_bit;
-
-	const char *pu_pd_name;
-	const unsigned int pu_pd_reg;
-	const unsigned char pu_pd_val;
-};
-
-enum omap730_index {
-	/* OMAP 730 keyboard */
-	E2_730_KBR0,
-	J7_730_KBR1,
-	E1_730_KBR2,
-	F3_730_KBR3,
-	D2_730_KBR4,
-	C2_730_KBC0,
-	D3_730_KBC1,
-	E4_730_KBC2,
-	F4_730_KBC3,
-	E3_730_KBC4,
-
-	/* USB */
-	AA17_730_USB_DM,
-	W16_730_USB_PU_EN,
-	W17_730_USB_VBUSI,
-};
-
-enum omap1xxx_index {
-	/* UART1 (BT_UART_GATING)*/
-	UART1_TX = 0,
-	UART1_RTS,
-
-	/* UART2 (COM_UART_GATING)*/
-	UART2_TX,
-	UART2_RX,
-	UART2_CTS,
-	UART2_RTS,
-
-	/* UART3 (GIGA_UART_GATING) */
-	UART3_TX,
-	UART3_RX,
-	UART3_CTS,
-	UART3_RTS,
-	UART3_CLKREQ,
-	UART3_BCLK,	/* 12MHz clock out */
-	Y15_1610_UART3_RTS,
-
-	/* PWT & PWL */
-	PWT,
-	PWL,
-
-	/* USB master generic */
-	R18_USB_VBUS,
-	R18_1510_USB_GPIO0,
-	W4_USB_PUEN,
-	W4_USB_CLKO,
-	W4_USB_HIGHZ,
-	W4_GPIO58,
-
-	/* USB1 master */
-	USB1_SUSP,
-	USB1_SEO,
-	W13_1610_USB1_SE0,
-	USB1_TXEN,
-	USB1_TXD,
-	USB1_VP,
-	USB1_VM,
-	USB1_RCV,
-	USB1_SPEED,
-	R13_1610_USB1_SPEED,
-	R13_1710_USB1_SE0,
-
-	/* USB2 master */
-	USB2_SUSP,
-	USB2_VP,
-	USB2_TXEN,
-	USB2_VM,
-	USB2_RCV,
-	USB2_SEO,
-	USB2_TXD,
-
-	/* OMAP-1510 GPIO */
-	R18_1510_GPIO0,
-	R19_1510_GPIO1,
-	M14_1510_GPIO2,
-
-	/* OMAP1610 GPIO */
-	P18_1610_GPIO3,
-	Y15_1610_GPIO17,
-
-	/* OMAP-1710 GPIO */
-	R18_1710_GPIO0,
-	V2_1710_GPIO10,
-	N21_1710_GPIO14,
-	W15_1710_GPIO40,
-
-	/* MPUIO */
-	MPUIO2,
-	N15_1610_MPUIO2,
-	MPUIO4,
-	MPUIO5,
-	T20_1610_MPUIO5,
-	W11_1610_MPUIO6,
-	V10_1610_MPUIO7,
-	W11_1610_MPUIO9,
-	V10_1610_MPUIO10,
-	W10_1610_MPUIO11,
-	E20_1610_MPUIO13,
-	U20_1610_MPUIO14,
-	E19_1610_MPUIO15,
-
-	/* MCBSP2 */
-	MCBSP2_CLKR,
-	MCBSP2_CLKX,
-	MCBSP2_DR,
-	MCBSP2_DX,
-	MCBSP2_FSR,
-	MCBSP2_FSX,
-
-	/* MCBSP3 */
-	MCBSP3_CLKX,
-
-	/* Misc ballouts */
-	BALLOUT_V8_ARMIO3,
-	N20_HDQ,
-
-	/* OMAP-1610 MMC2 */
-	W8_1610_MMC2_DAT0,
-	V8_1610_MMC2_DAT1,
-	W15_1610_MMC2_DAT2,
-	R10_1610_MMC2_DAT3,
-	Y10_1610_MMC2_CLK,
-	Y8_1610_MMC2_CMD,
-	V9_1610_MMC2_CMDDIR,
-	V5_1610_MMC2_DATDIR0,
-	W19_1610_MMC2_DATDIR1,
-	R18_1610_MMC2_CLKIN,
-
-	/* OMAP-1610 External Trace Interface */
-	M19_1610_ETM_PSTAT0,
-	L15_1610_ETM_PSTAT1,
-	L18_1610_ETM_PSTAT2,
-	L19_1610_ETM_D0,
-	J19_1610_ETM_D6,
-	J18_1610_ETM_D7,
-
-	/* OMAP16XX GPIO */
-	P20_1610_GPIO4,
-	V9_1610_GPIO7,
-	W8_1610_GPIO9,
-	N20_1610_GPIO11,
-	N19_1610_GPIO13,
-	P10_1610_GPIO22,
-	V5_1610_GPIO24,
-	AA20_1610_GPIO_41,
-	W19_1610_GPIO48,
-	M7_1610_GPIO62,
-	V14_16XX_GPIO37,
-	R9_16XX_GPIO18,
-	L14_16XX_GPIO49,
-
-	/* OMAP-1610 uWire */
-	V19_1610_UWIRE_SCLK,
-	U18_1610_UWIRE_SDI,
-	W21_1610_UWIRE_SDO,
-	N14_1610_UWIRE_CS0,
-	P15_1610_UWIRE_CS3,
-	N15_1610_UWIRE_CS1,
-
-	/* OMAP-1610 SPI */
-	U19_1610_SPIF_SCK,
-	U18_1610_SPIF_DIN,
-	P20_1610_SPIF_DIN,
-	W21_1610_SPIF_DOUT,
-	R18_1610_SPIF_DOUT,
-	N14_1610_SPIF_CS0,
-	N15_1610_SPIF_CS1,
-	T19_1610_SPIF_CS2,
-	P15_1610_SPIF_CS3,
-
-	/* OMAP-1610 Flash */
-	L3_1610_FLASH_CS2B_OE,
-	M8_1610_FLASH_CS2B_WE,
-
-	/* First MMC */
-	MMC_CMD,
-	MMC_DAT1,
-	MMC_DAT2,
-	MMC_DAT0,
-	MMC_CLK,
-	MMC_DAT3,
-
-	/* OMAP-1710 MMC CMDDIR and DATDIR0 */
-	M15_1710_MMC_CLKI,
-	P19_1710_MMC_CMDDIR,
-	P20_1710_MMC_DATDIR0,
-
-	/* OMAP-1610 USB0 alternate pin configuration */
-	W9_USB0_TXEN,
-	AA9_USB0_VP,
-	Y5_USB0_RCV,
-	R9_USB0_VM,
-	V6_USB0_TXD,
-	W5_USB0_SE0,
-	V9_USB0_SPEED,
-	V9_USB0_SUSP,
-
-	/* USB2 */
-	W9_USB2_TXEN,
-	AA9_USB2_VP,
-	Y5_USB2_RCV,
-	R9_USB2_VM,
-	V6_USB2_TXD,
-	W5_USB2_SE0,
-
-	/* 16XX UART */
-	R13_1610_UART1_TX,
-	V14_16XX_UART1_RX,
-	R14_1610_UART1_CTS,
-	AA15_1610_UART1_RTS,
-	R9_16XX_UART2_RX,
-	L14_16XX_UART3_RX,
-
-	/* I2C OMAP-1610 */
-	I2C_SCL,
-	I2C_SDA,
-
-	/* Keypad */
-	F18_1610_KBC0,
-	D20_1610_KBC1,
-	D19_1610_KBC2,
-	E18_1610_KBC3,
-	C21_1610_KBC4,
-	G18_1610_KBR0,
-	F19_1610_KBR1,
-	H14_1610_KBR2,
-	E20_1610_KBR3,
-	E19_1610_KBR4,
-	N19_1610_KBR5,
-
-	/* Power management */
-	T20_1610_LOW_PWR,
-
-	/* MCLK Settings */
-	V5_1710_MCLK_ON,
-	V5_1710_MCLK_OFF,
-	R10_1610_MCLK_ON,
-	R10_1610_MCLK_OFF,
-
-	/* CompactFlash controller */
-	P11_1610_CF_CD2,
-	R11_1610_CF_IOIS16,
-	V10_1610_CF_IREQ,
-	W10_1610_CF_RESET,
-	W11_1610_CF_CD1,
-
-	/* parallel camera */
-	J15_1610_CAM_LCLK,
-	J18_1610_CAM_D7,
-	J19_1610_CAM_D6,
-	J14_1610_CAM_D5,
-	K18_1610_CAM_D4,
-	K19_1610_CAM_D3,
-	K15_1610_CAM_D2,
-	K14_1610_CAM_D1,
-	L19_1610_CAM_D0,
-	L18_1610_CAM_VS,
-	L15_1610_CAM_HS,
-	M19_1610_CAM_RSTZ,
-	Y15_1610_CAM_OUTCLK,
-
-	/* serial camera */
-	H19_1610_CAM_EXCLK,
-	Y12_1610_CCP_CLKP,
-	W13_1610_CCP_CLKM,
-	W14_1610_CCP_DATAP,
-	Y14_1610_CCP_DATAM,
-
-};
-
-enum omap24xx_index {
-	/* 24xx I2C */
-	M19_24XX_I2C1_SCL,
-	L15_24XX_I2C1_SDA,
-	J15_24XX_I2C2_SCL,
-	H19_24XX_I2C2_SDA,
-
-	/* 24xx Menelaus interrupt */
-	W19_24XX_SYS_NIRQ,
-
-	/* 24xx clock */
-	W14_24XX_SYS_CLKOUT,
-
-	/* 24xx GPMC chipselects, wait pin monitoring */
-	E2_GPMC_NCS2,
-	L2_GPMC_NCS7,
-	L3_GPMC_WAIT0,
-	N7_GPMC_WAIT1,
-	M1_GPMC_WAIT2,
-	P1_GPMC_WAIT3,
-
-	/* 242X McBSP */
-	Y15_24XX_MCBSP2_CLKX,
-	R14_24XX_MCBSP2_FSX,
-	W15_24XX_MCBSP2_DR,
-	V15_24XX_MCBSP2_DX,
-
-	/* 24xx GPIO */
-	M21_242X_GPIO11,
-	P21_242X_GPIO12,
-	AA10_242X_GPIO13,
-	AA6_242X_GPIO14,
-	AA4_242X_GPIO15,
-	Y11_242X_GPIO16,
-	AA12_242X_GPIO17,
-	AA8_242X_GPIO58,
-	Y20_24XX_GPIO60,
-	W4__24XX_GPIO74,
-	N15_24XX_GPIO85,
-	M15_24XX_GPIO92,
-	P20_24XX_GPIO93,
-	P18_24XX_GPIO95,
-	M18_24XX_GPIO96,
-	L14_24XX_GPIO97,
-	J15_24XX_GPIO99,
-	V14_24XX_GPIO117,
-	P14_24XX_GPIO125,
-
-	/* 242x DBG GPIO */
-	V4_242X_GPIO49,
-	W2_242X_GPIO50,
-	U4_242X_GPIO51,
-	V3_242X_GPIO52,
-	V2_242X_GPIO53,
-	V6_242X_GPIO53,
-	T4_242X_GPIO54,
-	Y4_242X_GPIO54,
-	T3_242X_GPIO55,
-	U2_242X_GPIO56,
-
-	/* 24xx external DMA requests */
-	AA10_242X_DMAREQ0,
-	AA6_242X_DMAREQ1,
-	E4_242X_DMAREQ2,
-	G4_242X_DMAREQ3,
-	D3_242X_DMAREQ4,
-	E3_242X_DMAREQ5,
-
-	/* UART3 */
-	K15_24XX_UART3_TX,
-	K14_24XX_UART3_RX,
-
-	/* MMC/SDIO */
-	G19_24XX_MMC_CLKO,
-	H18_24XX_MMC_CMD,
-	F20_24XX_MMC_DAT0,
-	H14_24XX_MMC_DAT1,
-	E19_24XX_MMC_DAT2,
-	D19_24XX_MMC_DAT3,
-	F19_24XX_MMC_DAT_DIR0,
-	E20_24XX_MMC_DAT_DIR1,
-	F18_24XX_MMC_DAT_DIR2,
-	E18_24XX_MMC_DAT_DIR3,
-	G18_24XX_MMC_CMD_DIR,
-	H15_24XX_MMC_CLKI,
-
-	/* Full speed USB */
-	J20_24XX_USB0_PUEN,
-	J19_24XX_USB0_VP,
-	K20_24XX_USB0_VM,
-	J18_24XX_USB0_RCV,
-	K19_24XX_USB0_TXEN,
-	J14_24XX_USB0_SE0,
-	K18_24XX_USB0_DAT,
-
-	N14_24XX_USB1_SE0,
-	W12_24XX_USB1_SE0,
-	P15_24XX_USB1_DAT,
-	R13_24XX_USB1_DAT,
-	W20_24XX_USB1_TXEN,
-	P13_24XX_USB1_TXEN,
-	V19_24XX_USB1_RCV,
-	V12_24XX_USB1_RCV,
-
-	AA10_24XX_USB2_SE0,
-	Y11_24XX_USB2_DAT,
-	AA12_24XX_USB2_TXEN,
-	AA6_24XX_USB2_RCV,
-	AA4_24XX_USB2_TLLSE0,
-
-	/* Keypad GPIO*/
-	T19_24XX_KBR0,
-	R19_24XX_KBR1,
-	V18_24XX_KBR2,
-	M21_24XX_KBR3,
-	E5__24XX_KBR4,
-	M18_24XX_KBR5,
-	R20_24XX_KBC0,
-	M14_24XX_KBC1,
-	H19_24XX_KBC2,
-	V17_24XX_KBC3,
-	P21_24XX_KBC4,
-	L14_24XX_KBC5,
-	N19_24XX_KBC6,
-
-	/* 24xx Menelaus Keypad GPIO */
-	B3__24XX_KBR5,
-	AA4_24XX_KBC2,
-	B13_24XX_KBC6,
-
-	/* 2430 USB */
-	AD9_2430_USB0_PUEN,
-	Y11_2430_USB0_VP,
-	AD7_2430_USB0_VM,
-	AE7_2430_USB0_RCV,
-	AD4_2430_USB0_TXEN,
-	AF9_2430_USB0_SE0,
-	AE6_2430_USB0_DAT,
-	AD24_2430_USB1_SE0,
-	AB24_2430_USB1_RCV,
-	Y25_2430_USB1_TXEN,
-	AA26_2430_USB1_DAT,
-
-	/* 2430 HS-USB */
-	AD9_2430_USB0HS_DATA3,
-	Y11_2430_USB0HS_DATA4,
-	AD7_2430_USB0HS_DATA5,
-	AE7_2430_USB0HS_DATA6,
-	AD4_2430_USB0HS_DATA2,
-	AF9_2430_USB0HS_DATA0,
-	AE6_2430_USB0HS_DATA1,
-	AE8_2430_USB0HS_CLK,
-	AD8_2430_USB0HS_DIR,
-	AE5_2430_USB0HS_STP,
-	AE9_2430_USB0HS_NXT,
-	AC7_2430_USB0HS_DATA7,
-
-	/* 2430 McBSP */
-	AC10_2430_MCBSP2_FSX,
-	AD16_2430_MCBSP2_CLX,
-	AE13_2430_MCBSP2_DX,
-	AD13_2430_MCBSP2_DR,
-	AC10_2430_MCBSP2_FSX_OFF,
-	AD16_2430_MCBSP2_CLX_OFF,
-	AE13_2430_MCBSP2_DX_OFF,
-	AD13_2430_MCBSP2_DR_OFF,
-
-};
-
-struct omap_mux_cfg {
-	struct pin_config	*pins;
-	unsigned long		size;
-	int			(*cfg_reg)(const struct pin_config *cfg);
-};
-
-#ifdef	CONFIG_OMAP_MUX
-/* setup pin muxing in Linux */
-extern int omap1_mux_init(void);
-extern int omap2_mux_init(void);
-extern int omap_mux_register(struct omap_mux_cfg *);
-extern int omap_cfg_reg(unsigned long reg_cfg);
-#else
-/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
-static inline int omap1_mux_init(void) { return 0; }
-static inline int omap2_mux_init(void) { return 0; }
-static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-omap/nand.h b/include/asm-arm/arch-omap/nand.h
deleted file mode 100644
index 17ae26e..0000000
--- a/include/asm-arm/arch-omap/nand.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * include/asm-arm/arch-omap/nand.h
- *
- * Copyright (C) 2006 Micron Technology Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/mtd/partitions.h>
-
-struct omap_nand_platform_data {
-	unsigned int		options;
-	int			cs;
-	int			gpio_irq;
-	struct mtd_partition	*parts;
-	int			nr_parts;
-	int			(*nand_setup)(void __iomem *);
-	int			(*dev_ready)(struct omap_nand_platform_data *);
-	int			dma_channel;
-	void __iomem		*gpmc_cs_baseaddr;
-	void __iomem		*gpmc_baseaddr;
-};
diff --git a/include/asm-arm/arch-omap/omap-alsa.h b/include/asm-arm/arch-omap/omap-alsa.h
deleted file mode 100644
index faa0ed2..0000000
--- a/include/asm-arm/arch-omap/omap-alsa.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/omap-alsa.h
- *
- * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards.
- *
- * Copyright (C) 2006 Mika Laitio <lamikr@cc.jyu.fi>
- *
- * Copyright (C) 2005 Instituto Nokia de Tecnologia - INdT - Manaus Brazil
- * Written by Daniel Petrini, David Cohen, Anderson Briglia
- *            {daniel.petrini, david.cohen, anderson.briglia}@indt.org.br
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *  History
- *  -------
- *
- *  2005/07/25 INdT-10LE Kernel Team - 	Alsa driver for omap osk,
- *  					original version based in sa1100 driver
- *  					and omap oss driver.
- */
-
-#ifndef __OMAP_ALSA_H
-#define __OMAP_ALSA_H
-
-#include <asm/arch/dma.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <asm/arch/mcbsp.h>
-#include <linux/platform_device.h>
-
-#define DMA_BUF_SIZE	(1024 * 8)
-
-/*
- * Buffer management for alsa and dma
- */
-struct audio_stream {
-	char *id;		/* identification string */
-	int stream_id;		/* numeric identification */
-	int dma_dev;		/* dma number of that device */
-	int *lch;		/* Chain of channels this stream is linked to */
-	char started;		/* to store if the chain was started or not */
-	int dma_q_head;		/* DMA Channel Q Head */
-	int dma_q_tail;		/* DMA Channel Q Tail */
-	char dma_q_count;	/* DMA Channel Q Count */
-	int active:1;		/* we are using this stream for transfer now */
-	int period;		/* current transfer period */
-	int periods;		/* current count of periods registerd in the DMA engine */
-	spinlock_t dma_lock;	/* for locking in DMA operations */
-	struct snd_pcm_substream *stream;	/* the pcm stream */
-	unsigned linked:1;	/* dma channels linked */
-	int offset;		/* store start position of the last period in the alsa buffer */
-	int (*hw_start)(void);  /* interface to start HW interface, e.g. McBSP */
-	int (*hw_stop)(void);   /* interface to stop HW interface, e.g. McBSP */
-};
-
-/*
- * Alsa card structure for aic23
- */
-struct snd_card_omap_codec {
-	struct snd_card *card;
-	struct snd_pcm *pcm;
-	long samplerate;
-	struct audio_stream s[2];	/* playback & capture */
-};
-
-/* Codec specific information and function pointers.
- * Codec (omap-alsa-aic23.c and omap-alsa-tsc2101.c)
- * are responsible for defining the function pointers.
- */
-struct omap_alsa_codec_config {
-	char 	*name;
-	struct	omap_mcbsp_reg_cfg *mcbsp_regs_alsa;
-	struct	snd_pcm_hw_constraint_list *hw_constraints_rates;
-	struct	snd_pcm_hardware *snd_omap_alsa_playback;
-	struct	snd_pcm_hardware *snd_omap_alsa_capture;
-	void	(*codec_configure_dev)(void);
-	void	(*codec_set_samplerate)(long);
-	void	(*codec_clock_setup)(void);
-	int	(*codec_clock_on)(void);
-	int 	(*codec_clock_off)(void);
-	int	(*get_default_samplerate)(void);
-};
-
-/*********** Mixer function prototypes *************************/
-int snd_omap_mixer(struct snd_card_omap_codec *);
-void snd_omap_init_mixer(void);
-
-#ifdef CONFIG_PM
-void snd_omap_suspend_mixer(void);
-void snd_omap_resume_mixer(void);
-#endif
-
-int snd_omap_alsa_post_probe(struct platform_device *pdev, struct omap_alsa_codec_config *config);
-int snd_omap_alsa_remove(struct platform_device *pdev);
-#ifdef CONFIG_PM
-int snd_omap_alsa_suspend(struct platform_device *pdev, pm_message_t state);
-int snd_omap_alsa_resume(struct platform_device *pdev);
-#else
-#define snd_omap_alsa_suspend	NULL
-#define snd_omap_alsa_resume	NULL
-#endif
-
-void callback_omap_alsa_sound_dma(void *);
-
-#endif
diff --git a/include/asm-arm/arch-omap/omap1510.h b/include/asm-arm/arch-omap/omap1510.h
deleted file mode 100644
index c575d35..0000000
--- a/include/asm-arm/arch-omap/omap1510.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* linux/include/asm-arm/arch-omap/omap1510.h
- *
- * Hardware definitions for TI OMAP1510 processor.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP15XX_H
-#define __ASM_ARCH_OMAP15XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP1510_DSP_BASE	0xE0000000
-#define OMAP1510_DSP_SIZE	0x28000
-#define OMAP1510_DSP_START	0xE0000000
-
-#define OMAP1510_DSPREG_BASE	0xE1000000
-#define OMAP1510_DSPREG_SIZE	SZ_128K
-#define OMAP1510_DSPREG_START	0xE1000000
-
-#endif /*  __ASM_ARCH_OMAP15XX_H */
-
diff --git a/include/asm-arm/arch-omap/omap16xx.h b/include/asm-arm/arch-omap/omap16xx.h
deleted file mode 100644
index f7f5cdf..0000000
--- a/include/asm-arm/arch-omap/omap16xx.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/* linux/include/asm-arm/arch-omap/omap16xx.h
- *
- * Hardware definitions for TI OMAP1610/5912/1710 processors.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP16XX_H
-#define __ASM_ARCH_OMAP16XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP16XX_DSP_BASE	0xE0000000
-#define OMAP16XX_DSP_SIZE	0x28000
-#define OMAP16XX_DSP_START	0xE0000000
-
-#define OMAP16XX_DSPREG_BASE	0xE1000000
-#define OMAP16XX_DSPREG_SIZE	SZ_128K
-#define OMAP16XX_DSPREG_START	0xE1000000
-
-/*
- * ---------------------------------------------------------------------------
- * Interrupts
- * ---------------------------------------------------------------------------
- */
-#define OMAP_IH2_0_BASE		(0xfffe0000)
-#define OMAP_IH2_1_BASE		(0xfffe0100)
-#define OMAP_IH2_2_BASE		(0xfffe0200)
-#define OMAP_IH2_3_BASE		(0xfffe0300)
-
-#define OMAP_IH2_0_ITR		(OMAP_IH2_0_BASE + 0x00)
-#define OMAP_IH2_0_MIR		(OMAP_IH2_0_BASE + 0x04)
-#define OMAP_IH2_0_SIR_IRQ	(OMAP_IH2_0_BASE + 0x10)
-#define OMAP_IH2_0_SIR_FIQ	(OMAP_IH2_0_BASE + 0x14)
-#define OMAP_IH2_0_CONTROL	(OMAP_IH2_0_BASE + 0x18)
-#define OMAP_IH2_0_ILR0		(OMAP_IH2_0_BASE + 0x1c)
-#define OMAP_IH2_0_ISR		(OMAP_IH2_0_BASE + 0x9c)
-
-#define OMAP_IH2_1_ITR		(OMAP_IH2_1_BASE + 0x00)
-#define OMAP_IH2_1_MIR		(OMAP_IH2_1_BASE + 0x04)
-#define OMAP_IH2_1_SIR_IRQ	(OMAP_IH2_1_BASE + 0x10)
-#define OMAP_IH2_1_SIR_FIQ	(OMAP_IH2_1_BASE + 0x14)
-#define OMAP_IH2_1_CONTROL	(OMAP_IH2_1_BASE + 0x18)
-#define OMAP_IH2_1_ILR1		(OMAP_IH2_1_BASE + 0x1c)
-#define OMAP_IH2_1_ISR		(OMAP_IH2_1_BASE + 0x9c)
-
-#define OMAP_IH2_2_ITR		(OMAP_IH2_2_BASE + 0x00)
-#define OMAP_IH2_2_MIR		(OMAP_IH2_2_BASE + 0x04)
-#define OMAP_IH2_2_SIR_IRQ	(OMAP_IH2_2_BASE + 0x10)
-#define OMAP_IH2_2_SIR_FIQ	(OMAP_IH2_2_BASE + 0x14)
-#define OMAP_IH2_2_CONTROL	(OMAP_IH2_2_BASE + 0x18)
-#define OMAP_IH2_2_ILR2		(OMAP_IH2_2_BASE + 0x1c)
-#define OMAP_IH2_2_ISR		(OMAP_IH2_2_BASE + 0x9c)
-
-#define OMAP_IH2_3_ITR		(OMAP_IH2_3_BASE + 0x00)
-#define OMAP_IH2_3_MIR		(OMAP_IH2_3_BASE + 0x04)
-#define OMAP_IH2_3_SIR_IRQ	(OMAP_IH2_3_BASE + 0x10)
-#define OMAP_IH2_3_SIR_FIQ	(OMAP_IH2_3_BASE + 0x14)
-#define OMAP_IH2_3_CONTROL	(OMAP_IH2_3_BASE + 0x18)
-#define OMAP_IH2_3_ILR3		(OMAP_IH2_3_BASE + 0x1c)
-#define OMAP_IH2_3_ISR		(OMAP_IH2_3_BASE + 0x9c)
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define OMAP16XX_ARM_IDLECT3	(CLKGEN_REG_BASE + 0x24)
-
-/*
- * ----------------------------------------------------------------------------
- * Pin configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV6	(1 << 8)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV7	(1 << 9)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV8	(1 << 10)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV9	(1 << 11)
-#define OMAP16XX_SUBLVDS_CONF_VALID	(1 << 13)
-
-/*
- * ----------------------------------------------------------------------------
- * System control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP1610_RESET_CONTROL  0xfffe1140
-
-/*
- * ---------------------------------------------------------------------------
- * TIPB bus interface
- * ---------------------------------------------------------------------------
- */
-#define TIPB_SWITCH_BASE		 (0xfffbc800)
-#define OMAP16XX_MMCSD2_SSW_MPU_CONF	(TIPB_SWITCH_BASE + 0x160)
-
-/* UART3 Registers Maping through MPU bus */
-#define UART3_RHR               (OMAP_UART3_BASE + 0)
-#define UART3_THR               (OMAP_UART3_BASE + 0)
-#define UART3_DLL               (OMAP_UART3_BASE + 0)
-#define UART3_IER               (OMAP_UART3_BASE + 4)
-#define UART3_DLH               (OMAP_UART3_BASE + 4)
-#define UART3_IIR               (OMAP_UART3_BASE + 8)
-#define UART3_FCR               (OMAP_UART3_BASE + 8)
-#define UART3_EFR               (OMAP_UART3_BASE + 8)
-#define UART3_LCR               (OMAP_UART3_BASE + 0x0C)
-#define UART3_MCR               (OMAP_UART3_BASE + 0x10)
-#define UART3_XON1_ADDR1        (OMAP_UART3_BASE + 0x10)
-#define UART3_XON2_ADDR2        (OMAP_UART3_BASE + 0x14)
-#define UART3_LSR               (OMAP_UART3_BASE + 0x14)
-#define UART3_TCR               (OMAP_UART3_BASE + 0x18)
-#define UART3_MSR               (OMAP_UART3_BASE + 0x18)
-#define UART3_XOFF1             (OMAP_UART3_BASE + 0x18)
-#define UART3_XOFF2             (OMAP_UART3_BASE + 0x1C)
-#define UART3_SPR               (OMAP_UART3_BASE + 0x1C)
-#define UART3_TLR               (OMAP_UART3_BASE + 0x1C)
-#define UART3_MDR1              (OMAP_UART3_BASE + 0x20)
-#define UART3_MDR2              (OMAP_UART3_BASE + 0x24)
-#define UART3_SFLSR             (OMAP_UART3_BASE + 0x28)
-#define UART3_TXFLL             (OMAP_UART3_BASE + 0x28)
-#define UART3_RESUME            (OMAP_UART3_BASE + 0x2C)
-#define UART3_TXFLH             (OMAP_UART3_BASE + 0x2C)
-#define UART3_SFREGL            (OMAP_UART3_BASE + 0x30)
-#define UART3_RXFLL             (OMAP_UART3_BASE + 0x30)
-#define UART3_SFREGH            (OMAP_UART3_BASE + 0x34)
-#define UART3_RXFLH             (OMAP_UART3_BASE + 0x34)
-#define UART3_BLR               (OMAP_UART3_BASE + 0x38)
-#define UART3_ACREG             (OMAP_UART3_BASE + 0x3C)
-#define UART3_DIV16             (OMAP_UART3_BASE + 0x3C)
-#define UART3_SCR               (OMAP_UART3_BASE + 0x40)
-#define UART3_SSR               (OMAP_UART3_BASE + 0x44)
-#define UART3_EBLR              (OMAP_UART3_BASE + 0x48)
-#define UART3_OSC_12M_SEL       (OMAP_UART3_BASE + 0x4C)
-#define UART3_MVR               (OMAP_UART3_BASE + 0x50)
-
-/*
- * ---------------------------------------------------------------------------
- * Watchdog timer
- * ---------------------------------------------------------------------------
- */
-
-/* 32-bit Watchdog timer in OMAP 16XX */
-#define OMAP_16XX_WATCHDOG_BASE        (0xfffeb000)
-#define OMAP_16XX_WIDR         (OMAP_16XX_WATCHDOG_BASE + 0x00)
-#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
-#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)
-#define OMAP_16XX_WCLR         (OMAP_16XX_WATCHDOG_BASE + 0x24)
-#define OMAP_16XX_WCRR         (OMAP_16XX_WATCHDOG_BASE + 0x28)
-#define OMAP_16XX_WLDR         (OMAP_16XX_WATCHDOG_BASE + 0x2c)
-#define OMAP_16XX_WTGR         (OMAP_16XX_WATCHDOG_BASE + 0x30)
-#define OMAP_16XX_WWPS         (OMAP_16XX_WATCHDOG_BASE + 0x34)
-#define OMAP_16XX_WSPR         (OMAP_16XX_WATCHDOG_BASE + 0x48)
-
-#define WCLR_PRE_SHIFT         5
-#define WCLR_PTV_SHIFT         2
-
-#define WWPS_W_PEND_WSPR       (1 << 4)
-#define WWPS_W_PEND_WTGR       (1 << 3)
-#define WWPS_W_PEND_WLDR       (1 << 2)
-#define WWPS_W_PEND_WCRR       (1 << 1)
-#define WWPS_W_PEND_WCLR       (1 << 0)
-
-#define WSPR_ENABLE_0          (0x0000bbbb)
-#define WSPR_ENABLE_1          (0x00004444)
-#define WSPR_DISABLE_0         (0x0000aaaa)
-#define WSPR_DISABLE_1         (0x00005555)
-
-/* Mailbox */
-#define OMAP16XX_MAILBOX_BASE	(0xfffcf000)
-
-#endif /*  __ASM_ARCH_OMAP16XX_H */
-
diff --git a/include/asm-arm/arch-omap/omap24xx.h b/include/asm-arm/arch-omap/omap24xx.h
deleted file mode 100644
index b9fcaae..0000000
--- a/include/asm-arm/arch-omap/omap24xx.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * include/asm-arm/arch-omap/omap24xx.h
- *
- * This file contains the processor specific definitions
- * of the TI OMAP24XX.
- *
- * Copyright (C) 2007 Texas Instruments.
- * Copyright (C) 2007 Nokia Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#ifndef __ASM_ARCH_OMAP24XX_H
-#define __ASM_ARCH_OMAP24XX_H
-
-/*
- * Please place only base defines here and put the rest in device
- * specific headers. Note also that some of these defines are needed
- * for omap1 to compile without adding ifdefs.
- */
-
-#define L4_24XX_BASE		0x48000000
-#define L4_WK_243X_BASE		0x49000000
-#define L3_24XX_BASE		0x68000000
-
-/* interrupt controller */
-#define OMAP24XX_IC_BASE	(L4_24XX_BASE + 0xfe000)
-#define OMAP24XX_IVA_INTC_BASE	0x40000000
-#define IRQ_SIR_IRQ		0x0040
-
-#define OMAP2420_CTRL_BASE	L4_24XX_BASE
-#define OMAP2420_32KSYNCT_BASE	(L4_24XX_BASE + 0x4000)
-#define OMAP2420_PRCM_BASE	(L4_24XX_BASE + 0x8000)
-#define OMAP2420_CM_BASE	(L4_24XX_BASE + 0x8000)
-#define OMAP2420_PRM_BASE	OMAP2420_CM_BASE
-#define OMAP2420_SDRC_BASE	(L3_24XX_BASE + 0x9000)
-#define OMAP2420_SMS_BASE	0x68008000
-
-#define OMAP2430_32KSYNCT_BASE	(L4_WK_243X_BASE + 0x20000)
-#define OMAP2430_PRCM_BASE	(L4_WK_243X_BASE + 0x6000)
-#define OMAP2430_CM_BASE	(L4_WK_243X_BASE + 0x6000)
-#define OMAP2430_PRM_BASE	OMAP2430_CM_BASE
-
-#define OMAP243X_SMS_BASE	0x6C000000
-#define OMAP243X_SDRC_BASE	0x6D000000
-#define OMAP243X_GPMC_BASE	0x6E000000
-#define OMAP243X_SCM_BASE	(L4_WK_243X_BASE + 0x2000)
-#define OMAP243X_CTRL_BASE	OMAP243X_SCM_BASE
-#define OMAP243X_HS_BASE	(L4_24XX_BASE + 0x000ac000)
-
-/* DSP SS */
-#define OMAP2420_DSP_BASE	0x58000000
-#define OMAP2420_DSP_MEM_BASE	(OMAP2420_DSP_BASE + 0x0)
-#define OMAP2420_DSP_IPI_BASE	(OMAP2420_DSP_BASE + 0x1000000)
-#define OMAP2420_DSP_MMU_BASE	(OMAP2420_DSP_BASE + 0x2000000)
-
-#define OMAP243X_DSP_BASE	0x5C000000
-#define OMAP243X_DSP_MEM_BASE	(OMAP243X_DSP_BASE + 0x0)
-#define OMAP243X_DSP_MMU_BASE	(OMAP243X_DSP_BASE + 0x1000000)
-
-/* Mailbox */
-#define OMAP24XX_MAILBOX_BASE	(L4_24XX_BASE + 0x94000)
-
-/* Camera */
-#define OMAP24XX_CAMERA_BASE	(L4_24XX_BASE + 0x52000)
-
-/* Security */
-#define OMAP24XX_SEC_BASE	(L4_24XX_BASE + 0xA0000)
-#define OMAP24XX_SEC_RNG_BASE	(OMAP24XX_SEC_BASE + 0x0000)
-#define OMAP24XX_SEC_DES_BASE	(OMAP24XX_SEC_BASE + 0x2000)
-#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000)
-#define OMAP24XX_SEC_AES_BASE	(OMAP24XX_SEC_BASE + 0x6000)
-#define OMAP24XX_SEC_PKA_BASE	(OMAP24XX_SEC_BASE + 0x8000)
-
-#if defined(CONFIG_ARCH_OMAP2420)
-
-#define OMAP2_32KSYNCT_BASE	OMAP2420_32KSYNCT_BASE
-#define OMAP2_PRCM_BASE		OMAP2420_PRCM_BASE
-#define OMAP2_CM_BASE		OMAP2420_CM_BASE
-#define OMAP2_PRM_BASE		OMAP2420_PRM_BASE
-#define OMAP2_VA_IC_BASE	IO_ADDRESS(OMAP24XX_IC_BASE)
-
-#elif defined(CONFIG_ARCH_OMAP2430)
-
-#define OMAP2_32KSYNCT_BASE	OMAP2430_32KSYNCT_BASE
-#define OMAP2_PRCM_BASE		OMAP2430_PRCM_BASE
-#define OMAP2_CM_BASE		OMAP2430_CM_BASE
-#define OMAP2_PRM_BASE		OMAP2430_PRM_BASE
-#define OMAP2_VA_IC_BASE	IO_ADDRESS(OMAP24XX_IC_BASE)
-
-#endif
-
-#endif /* __ASM_ARCH_OMAP24XX_H */
-
diff --git a/include/asm-arm/arch-omap/omap34xx.h b/include/asm-arm/arch-omap/omap34xx.h
deleted file mode 100644
index aa30c6d..0000000
--- a/include/asm-arm/arch-omap/omap34xx.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * include/asm-arm/arch-omap/omap34xx.h
- *
- * This file contains the processor specific definitions of the TI OMAP34XX.
- *
- * Copyright (C) 2007 Texas Instruments.
- * Copyright (C) 2007 Nokia Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_OMAP34XX_H
-#define __ASM_ARCH_OMAP34XX_H
-
-/*
- * Please place only base defines here and put the rest in device
- * specific headers.
- */
-
-#define L4_34XX_BASE		0x48000000
-#define L4_WK_34XX_BASE		0x48300000
-#define L4_WK_OMAP_BASE		L4_WK_34XX_BASE
-#define L4_PER_34XX_BASE	0x49000000
-#define L4_PER_OMAP_BASE	L4_PER_34XX_BASE
-#define L4_EMU_34XX_BASE	0x54000000
-#define L4_EMU_BASE		L4_EMU_34XX_BASE
-#define L3_34XX_BASE		0x68000000
-#define L3_OMAP_BASE		L3_34XX_BASE
-
-#define OMAP3430_32KSYNCT_BASE	0x48320000
-#define OMAP3430_CM_BASE	0x48004800
-#define OMAP3430_PRM_BASE	0x48306800
-#define OMAP343X_SMS_BASE	0x6C000000
-#define OMAP343X_SDRC_BASE	0x6D000000
-#define OMAP34XX_GPMC_BASE	0x6E000000
-#define OMAP343X_SCM_BASE	0x48002000
-#define OMAP343X_CTRL_BASE	OMAP343X_SCM_BASE
-
-#define OMAP34XX_IC_BASE	0x48200000
-#define OMAP34XX_IVA_INTC_BASE	0x40000000
-#define OMAP34XX_HSUSB_OTG_BASE	(L4_34XX_BASE + 0xAB000)
-#define OMAP34XX_HSUSB_HOST_BASE	(L4_34XX_BASE + 0x64000)
-#define OMAP34XX_USBTLL_BASE	(L4_34XX_BASE + 0x62000)
-
-
-#if defined(CONFIG_ARCH_OMAP3430)
-
-#define OMAP2_32KSYNCT_BASE		OMAP3430_32KSYNCT_BASE
-#define OMAP2_CM_BASE			OMAP3430_CM_BASE
-#define OMAP2_PRM_BASE			OMAP3430_PRM_BASE
-#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP34XX_IC_BASE)
-
-#endif
-
-#define OMAP34XX_DSP_BASE	0x58000000
-#define OMAP34XX_DSP_MEM_BASE	(OMAP34XX_DSP_BASE + 0x0)
-#define OMAP34XX_DSP_IPI_BASE	(OMAP34XX_DSP_BASE + 0x1000000)
-#define OMAP34XX_DSP_MMU_BASE	(OMAP34XX_DSP_BASE + 0x2000000)
-#endif /* __ASM_ARCH_OMAP34XX_H */
-
diff --git a/include/asm-arm/arch-omap/omap730.h b/include/asm-arm/arch-omap/omap730.h
deleted file mode 100644
index 755b64c..0000000
--- a/include/asm-arm/arch-omap/omap730.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* linux/include/asm-arm/arch-omap/omap730.h
- *
- * Hardware definitions for TI OMAP730 processor.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP730_H
-#define __ASM_ARCH_OMAP730_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP730_DSP_BASE	0xE0000000
-#define OMAP730_DSP_SIZE	0x50000
-#define OMAP730_DSP_START	0xE0000000
-
-#define OMAP730_DSPREG_BASE	0xE1000000
-#define OMAP730_DSPREG_SIZE	SZ_128K
-#define OMAP730_DSPREG_START	0xE1000000
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 specific configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_CONFIG_BASE	0xfffe1000
-#define OMAP730_IO_CONF_0	0xfffe1070
-#define OMAP730_IO_CONF_1	0xfffe1074
-#define OMAP730_IO_CONF_2	0xfffe1078
-#define OMAP730_IO_CONF_3	0xfffe107c
-#define OMAP730_IO_CONF_4	0xfffe1080
-#define OMAP730_IO_CONF_5	0xfffe1084
-#define OMAP730_IO_CONF_6	0xfffe1088
-#define OMAP730_IO_CONF_7	0xfffe108c
-#define OMAP730_IO_CONF_8	0xfffe1090
-#define OMAP730_IO_CONF_9	0xfffe1094
-#define OMAP730_IO_CONF_10	0xfffe1098
-#define OMAP730_IO_CONF_11	0xfffe109c
-#define OMAP730_IO_CONF_12	0xfffe10a0
-#define OMAP730_IO_CONF_13	0xfffe10a4
-
-#define OMAP730_MODE_1		0xfffe1010
-#define OMAP730_MODE_2		0xfffe1014
-
-/* CSMI specials: in terms of base + offset */
-#define OMAP730_MODE2_OFFSET	0x14
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 traffic controller configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_FLASH_CFG_0	0xfffecc10
-#define OMAP730_FLASH_ACFG_0	0xfffecc50
-#define OMAP730_FLASH_CFG_1	0xfffecc14
-#define OMAP730_FLASH_ACFG_1	0xfffecc54
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 DSP control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_ICR_BASE	0xfffbb800
-#define OMAP730_DSP_M_CTL	0xfffbb804
-#define OMAP730_DSP_MMU_BASE	0xfffed200
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 PCC_UPLD configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_PCC_UPLD_CTRL_BASE	(0xfffe0900)
-#define OMAP730_PCC_UPLD_CTRL		(OMAP730_PCC_UPLD_CTRL_BASE + 0x00)
-
-#endif /*  __ASM_ARCH_OMAP730_H */
-
diff --git a/include/asm-arm/arch-omap/omapfb.h b/include/asm-arm/arch-omap/omapfb.h
deleted file mode 100644
index 46d7a4f..0000000
--- a/include/asm-arm/arch-omap/omapfb.h
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * File: include/asm-arm/arch-omap/omapfb.h
- *
- * Framebuffer driver for TI OMAP boards
- *
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef __OMAPFB_H
-#define __OMAPFB_H
-
-#include <asm/ioctl.h>
-#include <asm/types.h>
-
-/* IOCTL commands. */
-
-#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
-#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
-#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
-#define OMAP_IO(num)		_IO('O', num)
-
-#define OMAPFB_MIRROR		OMAP_IOW(31, int)
-#define OMAPFB_SYNC_GFX		OMAP_IO(37)
-#define OMAPFB_VSYNC		OMAP_IO(38)
-#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
-#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
-#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
-#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
-#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
-#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
-#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
-#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
-#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
-#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
-#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
-#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
-#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
-
-#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
-#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
-#define OMAPFB_CAPS_PANEL_MASK		0xff000000
-
-#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
-#define OMAPFB_CAPS_TEARSYNC		0x00002000
-#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
-#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
-#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
-#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
-#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
-#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
-
-/* Values from DSP must map to lower 16-bits */
-#define OMAPFB_FORMAT_MASK		0x00ff
-#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
-#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
-#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
-#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
-#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
-
-#define OMAPFB_EVENT_READY	1
-#define OMAPFB_EVENT_DISABLED	2
-
-#define OMAPFB_MEMTYPE_SDRAM		0
-#define OMAPFB_MEMTYPE_SRAM		1
-#define OMAPFB_MEMTYPE_MAX		1
-
-enum omapfb_color_format {
-	OMAPFB_COLOR_RGB565 = 0,
-	OMAPFB_COLOR_YUV422,
-	OMAPFB_COLOR_YUV420,
-	OMAPFB_COLOR_CLUT_8BPP,
-	OMAPFB_COLOR_CLUT_4BPP,
-	OMAPFB_COLOR_CLUT_2BPP,
-	OMAPFB_COLOR_CLUT_1BPP,
-	OMAPFB_COLOR_RGB444,
-	OMAPFB_COLOR_YUY422,
-};
-
-struct omapfb_update_window {
-	__u32 x, y;
-	__u32 width, height;
-	__u32 format;
-	__u32 out_x, out_y;
-	__u32 out_width, out_height;
-	__u32 reserved[8];
-};
-
-struct omapfb_update_window_old {
-	__u32 x, y;
-	__u32 width, height;
-	__u32 format;
-};
-
-enum omapfb_plane {
-	OMAPFB_PLANE_GFX = 0,
-	OMAPFB_PLANE_VID1,
-	OMAPFB_PLANE_VID2,
-};
-
-enum omapfb_channel_out {
-	OMAPFB_CHANNEL_OUT_LCD = 0,
-	OMAPFB_CHANNEL_OUT_DIGIT,
-};
-
-struct omapfb_plane_info {
-	__u32 pos_x;
-	__u32 pos_y;
-	__u8  enabled;
-	__u8  channel_out;
-	__u8  mirror;
-	__u8  reserved1;
-	__u32 out_width;
-	__u32 out_height;
-	__u32 reserved2[12];
-};
-
-struct omapfb_mem_info {
-	__u32 size;
-	__u8  type;
-	__u8  reserved[3];
-};
-
-struct omapfb_caps {
-	__u32 ctrl;
-	__u32 plane_color;
-	__u32 wnd_color;
-};
-
-enum omapfb_color_key_type {
-	OMAPFB_COLOR_KEY_DISABLED = 0,
-	OMAPFB_COLOR_KEY_GFX_DST,
-	OMAPFB_COLOR_KEY_VID_SRC,
-};
-
-struct omapfb_color_key {
-	__u8  channel_out;
-	__u32 background;
-	__u32 trans_key;
-	__u8  key_type;
-};
-
-enum omapfb_update_mode {
-	OMAPFB_UPDATE_DISABLED = 0,
-	OMAPFB_AUTO_UPDATE,
-	OMAPFB_MANUAL_UPDATE
-};
-
-#ifdef __KERNEL__
-
-#include <linux/completion.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/mutex.h>
-
-#include <asm/arch/board.h>
-
-#define OMAP_LCDC_INV_VSYNC             0x0001
-#define OMAP_LCDC_INV_HSYNC             0x0002
-#define OMAP_LCDC_INV_PIX_CLOCK         0x0004
-#define OMAP_LCDC_INV_OUTPUT_EN         0x0008
-#define OMAP_LCDC_HSVS_RISING_EDGE      0x0010
-#define OMAP_LCDC_HSVS_OPPOSITE         0x0020
-
-#define OMAP_LCDC_SIGNAL_MASK		0x003f
-
-#define OMAP_LCDC_PANEL_TFT		0x0100
-
-#define OMAPFB_PLANE_XRES_MIN		8
-#define OMAPFB_PLANE_YRES_MIN		8
-
-#ifdef CONFIG_ARCH_OMAP1
-#define OMAPFB_PLANE_NUM		1
-#else
-#define OMAPFB_PLANE_NUM		3
-#endif
-
-struct omapfb_device;
-
-struct lcd_panel {
-	const char	*name;
-	int		config;		/* TFT/STN, signal inversion */
-	int		bpp;		/* Pixel format in fb mem */
-	int		data_lines;	/* Lines on LCD HW interface */
-
-	int		x_res, y_res;
-	int		pixel_clock;	/* In kHz */
-	int		hsw;		/* Horizontal synchronization
-					   pulse width */
-	int		hfp;		/* Horizontal front porch */
-	int		hbp;		/* Horizontal back porch */
-	int		vsw;		/* Vertical synchronization
-					   pulse width */
-	int		vfp;		/* Vertical front porch */
-	int		vbp;		/* Vertical back porch */
-	int		acb;		/* ac-bias pin frequency */
-	int		pcd;		/* pixel clock divider.
-					   Obsolete use pixel_clock instead */
-
-	int		(*init)		(struct lcd_panel *panel,
-					 struct omapfb_device *fbdev);
-	void		(*cleanup)	(struct lcd_panel *panel);
-	int		(*enable)	(struct lcd_panel *panel);
-	void		(*disable)	(struct lcd_panel *panel);
-	unsigned long	(*get_caps)	(struct lcd_panel *panel);
-	int		(*set_bklight_level)(struct lcd_panel *panel,
-					     unsigned int level);
-	unsigned int	(*get_bklight_level)(struct lcd_panel *panel);
-	unsigned int	(*get_bklight_max)  (struct lcd_panel *panel);
-	int		(*run_test)	(struct lcd_panel *panel, int test_num);
-};
-
-struct extif_timings {
-	int cs_on_time;
-	int cs_off_time;
-	int we_on_time;
-	int we_off_time;
-	int re_on_time;
-	int re_off_time;
-	int we_cycle_time;
-	int re_cycle_time;
-	int cs_pulse_width;
-	int access_time;
-
-	int clk_div;
-
-	u32 tim[5];		/* set by extif->convert_timings */
-
-	int converted;
-};
-
-struct lcd_ctrl_extif {
-	int  (*init)		(struct omapfb_device *fbdev);
-	void (*cleanup)		(void);
-	void (*get_clk_info)	(u32 *clk_period, u32 *max_clk_div);
-	unsigned long (*get_max_tx_rate)(void);
-	int  (*convert_timings)	(struct extif_timings *timings);
-	void (*set_timings)	(const struct extif_timings *timings);
-	void (*set_bits_per_cycle)(int bpc);
-	void (*write_command)	(const void *buf, unsigned int len);
-	void (*read_data)	(void *buf, unsigned int len);
-	void (*write_data)	(const void *buf, unsigned int len);
-	void (*transfer_area)	(int width, int height,
-				 void (callback)(void * data), void *data);
-	int  (*setup_tearsync)	(unsigned pin_cnt,
-				 unsigned hs_pulse_time, unsigned vs_pulse_time,
-				 int hs_pol_inv, int vs_pol_inv, int div);
-	int  (*enable_tearsync) (int enable, unsigned line);
-
-	unsigned long		max_transmit_size;
-};
-
-struct omapfb_notifier_block {
-	struct notifier_block	nb;
-	void			*data;
-	int			plane_idx;
-};
-
-typedef int (*omapfb_notifier_callback_t)(struct notifier_block *,
-					  unsigned long event,
-					  void *fbi);
-
-struct omapfb_mem_region {
-	dma_addr_t	paddr;
-	void		*vaddr;
-	unsigned long	size;
-	u8		type;		/* OMAPFB_PLANE_MEM_* */
-	unsigned	alloc:1;	/* allocated by the driver */
-	unsigned	map:1;		/* kernel mapped by the driver */
-};
-
-struct omapfb_mem_desc {
-	int				region_cnt;
-	struct omapfb_mem_region	region[OMAPFB_PLANE_NUM];
-};
-
-struct lcd_ctrl {
-	const char	*name;
-	void		*data;
-
-	int		(*init)		  (struct omapfb_device *fbdev,
-					   int ext_mode,
-					   struct omapfb_mem_desc *req_md);
-	void		(*cleanup)	  (void);
-	void		(*bind_client)	  (struct omapfb_notifier_block *nb);
-	void		(*get_caps)	  (int plane, struct omapfb_caps *caps);
-	int		(*set_update_mode)(enum omapfb_update_mode mode);
-	enum omapfb_update_mode (*get_update_mode)(void);
-	int		(*setup_plane)	  (int plane, int channel_out,
-					   unsigned long offset,
-					   int screen_width,
-					   int pos_x, int pos_y, int width,
-					   int height, int color_mode);
-	int		(*setup_mem)	  (int plane, size_t size,
-					   int mem_type, unsigned long *paddr);
-	int		(*mmap)		  (struct fb_info *info,
-					   struct vm_area_struct *vma);
-	int		(*set_scale)	  (int plane,
-					   int orig_width, int orig_height,
-					   int out_width, int out_height);
-	int		(*enable_plane)	  (int plane, int enable);
-	int		(*update_window)  (struct fb_info *fbi,
-					   struct omapfb_update_window *win,
-					   void (*callback)(void *),
-					   void *callback_data);
-	void		(*sync)		  (void);
-	void		(*suspend)	  (void);
-	void		(*resume)	  (void);
-	int		(*run_test)	  (int test_num);
-	int		(*setcolreg)	  (u_int regno, u16 red, u16 green,
-					   u16 blue, u16 transp,
-					   int update_hw_mem);
-	int		(*set_color_key)  (struct omapfb_color_key *ck);
-	int		(*get_color_key)  (struct omapfb_color_key *ck);
-};
-
-enum omapfb_state {
-	OMAPFB_DISABLED	= 0,
-	OMAPFB_SUSPENDED= 99,
-	OMAPFB_ACTIVE	= 100
-};
-
-struct omapfb_plane_struct {
-	int				idx;
-	struct omapfb_plane_info	info;
-	enum omapfb_color_format	color_mode;
-	struct omapfb_device		*fbdev;
-};
-
-struct omapfb_device {
-	int			state;
-	int                     ext_lcdc;               /* Using external
-                                                           LCD controller */
-	struct mutex		rqueue_mutex;
-
-	int			palette_size;
-	u32			pseudo_palette[17];
-
-	struct lcd_panel	*panel;			/* LCD panel */
-	struct lcd_ctrl         *ctrl;			/* LCD controller */
-	struct lcd_ctrl		*int_ctrl;		/* internal LCD ctrl */
-	struct lcd_ctrl_extif	*ext_if;		/* LCD ctrl external
-							   interface */
-	struct device		*dev;
-	struct fb_var_screeninfo	new_var;	/* for mode changes */
-
-	struct omapfb_mem_desc		mem_desc;
-	struct fb_info			*fb_info[OMAPFB_PLANE_NUM];
-};
-
-struct omapfb_platform_data {
-	struct omap_lcd_config		lcd;
-	struct omapfb_mem_desc		mem_desc;
-	void				*ctrl_platform_data;
-};
-
-#ifdef CONFIG_ARCH_OMAP1
-extern struct lcd_ctrl omap1_lcd_ctrl;
-#else
-extern struct lcd_ctrl omap2_disp_ctrl;
-#endif
-
-extern void omapfb_register_panel(struct lcd_panel *panel);
-extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
-extern void omapfb_notify_clients(struct omapfb_device *fbdev,
-				  unsigned long event);
-extern int  omapfb_register_client(struct omapfb_notifier_block *nb,
-				   omapfb_notifier_callback_t callback,
-				   void *callback_data);
-extern int  omapfb_unregister_client(struct omapfb_notifier_block *nb);
-extern int  omapfb_update_window_async(struct fb_info *fbi,
-				       struct omapfb_update_window *win,
-				       void (*callback)(void *),
-				       void *callback_data);
-
-/* in arch/arm/plat-omap/fb.c */
-extern void omapfb_set_ctrl_platform_data(void *pdata);
-
-#endif /* __KERNEL__ */
-
-#endif /* __OMAPFB_H */
diff --git a/include/asm-arm/arch-omap/onenand.h b/include/asm-arm/arch-omap/onenand.h
deleted file mode 100644
index 6c959d0ce..0000000
--- a/include/asm-arm/arch-omap/onenand.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-arm/arch-omap/onenand.h
- *
- * Copyright (C) 2006 Nokia Corporation
- * Author: Juha Yrjola
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/mtd/partitions.h>
-
-struct omap_onenand_platform_data {
-	int			cs;
-	int			gpio_irq;
-	struct mtd_partition	*parts;
-	int			nr_parts;
-	int                     (*onenand_setup)(void __iomem *);
-	int			dma_channel;
-};
diff --git a/include/asm-arm/arch-omap/param.h b/include/asm-arm/arch-omap/param.h
deleted file mode 100644
index face9ad..0000000
--- a/include/asm-arm/arch-omap/param.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/param.h
- *
- */
-
-#ifdef CONFIG_OMAP_32K_TIMER_HZ
-#define HZ	CONFIG_OMAP_32K_TIMER_HZ
-#endif
diff --git a/include/asm-arm/arch-omap/pm.h b/include/asm-arm/arch-omap/pm.h
deleted file mode 100644
index 1458805..0000000
--- a/include/asm-arm/arch-omap/pm.h
+++ /dev/null
@@ -1,356 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/pm.h
- *
- * Header file for OMAP Power Management Routines
- *
- * Author: MontaVista Software, Inc.
- *	   support@mvista.com
- *
- * Copyright 2002 MontaVista Software Inc.
- *
- * Cleanup 2004 for Linux 2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_PM_H
-#define __ASM_ARCH_OMAP_PM_H
-
-/*
- * ----------------------------------------------------------------------------
- * Register and offset definitions to be used in PM assembler code
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_ASM_BASE		io_p2v(0xfffece00)
-#define ARM_IDLECT1_ASM_OFFSET		0x04
-#define ARM_IDLECT2_ASM_OFFSET		0x08
-
-#define TCMIF_ASM_BASE			io_p2v(0xfffecc00)
-#define EMIFS_CONFIG_ASM_OFFSET		0x0c
-#define EMIFF_SDRAM_CONFIG_ASM_OFFSET	0x20
-
-/*
- * ----------------------------------------------------------------------------
- * Power management bitmasks
- * ----------------------------------------------------------------------------
- */
-#define IDLE_WAIT_CYCLES		0x00000fff
-#define PERIPHERAL_ENABLE		0x2
-
-#define SELF_REFRESH_MODE		0x0c000001
-#define IDLE_EMIFS_REQUEST		0xc
-#define MODEM_32K_EN			0x1
-#define PER_EN				0x1
-
-#define CPU_SUSPEND_SIZE		200
-#define ULPD_LOW_PWR_EN			0x0001
-#define ULPD_DEEP_SLEEP_TRANSITION_EN	0x0010
-#define ULPD_SETUP_ANALOG_CELL_3_VAL	0
-#define ULPD_POWER_CTRL_REG_VAL		0x0219
-
-#define DSP_IDLE_DELAY			10
-#define DSP_IDLE			0x0040
-#define DSP_RST				0x0004
-#define DSP_ENABLE			0x0002
-#define SUFFICIENT_DSP_RESET_TIME	1000
-#define DEFAULT_MPUI_CONFIG		0x05cf
-#define ENABLE_XORCLK			0x2
-#define DSP_CLOCK_ENABLE		0x2000
-#define DSP_IDLE_MODE			0x2
-#define TC_IDLE_REQUEST			(0x0000000c)
-
-#define IRQ_LEVEL2			(1<<0)
-#define IRQ_KEYBOARD			(1<<1)
-#define IRQ_UART2			(1<<15)
-
-#define PDE_BIT				0x08
-#define PWD_EN_BIT			0x04
-#define EN_PERCK_BIT			0x04
-
-#define OMAP1510_DEEP_SLEEP_REQUEST	0x0ec7
-#define OMAP1510_BIG_SLEEP_REQUEST	0x0cc5
-#define OMAP1510_IDLE_LOOP_REQUEST	0x0c00
-#define OMAP1510_IDLE_CLOCK_DOMAINS	0x2
-
-/* Both big sleep and deep sleep use same values. Difference is in ULPD. */
-#define OMAP1610_IDLECT1_SLEEP_VAL	0x13c7
-#define OMAP1610_IDLECT2_SLEEP_VAL	0x09c7
-#define OMAP1610_IDLECT3_VAL		0x3f
-#define OMAP1610_IDLECT3_SLEEP_ORMASK	0x2c
-#define OMAP1610_IDLECT3		0xfffece24
-#define OMAP1610_IDLE_LOOP_REQUEST	0x0400
-
-#define OMAP730_IDLECT1_SLEEP_VAL	0x16c7
-#define OMAP730_IDLECT2_SLEEP_VAL	0x09c7
-#define OMAP730_IDLECT3_VAL		0x3f
-#define OMAP730_IDLECT3		0xfffece24
-#define OMAP730_IDLE_LOOP_REQUEST	0x0C00
-
-#if     !defined(CONFIG_ARCH_OMAP730) && \
-	!defined(CONFIG_ARCH_OMAP15XX) && \
-	!defined(CONFIG_ARCH_OMAP16XX) && \
-	!defined(CONFIG_ARCH_OMAP24XX)
-#error "Power management for this processor not implemented yet"
-#endif
-
-#ifndef __ASSEMBLER__
-
-#include <linux/clk.h>
-
-extern void prevent_idle_sleep(void);
-extern void allow_idle_sleep(void);
-
-/**
- * clk_deny_idle - Prevents the clock from being idled during MPU idle
- * @clk: clock signal handle
- */
-void clk_deny_idle(struct clk *clk);
-
-/**
- * clk_allow_idle - Counters previous clk_deny_idle
- * @clk: clock signal handle
- */
-void clk_deny_idle(struct clk *clk);
-
-extern void omap_pm_idle(void);
-extern void omap_pm_suspend(void);
-extern void omap730_cpu_suspend(unsigned short, unsigned short);
-extern void omap1510_cpu_suspend(unsigned short, unsigned short);
-extern void omap1610_cpu_suspend(unsigned short, unsigned short);
-extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision);
-extern void omap730_idle_loop_suspend(void);
-extern void omap1510_idle_loop_suspend(void);
-extern void omap1610_idle_loop_suspend(void);
-extern void omap24xx_idle_loop_suspend(void);
-
-extern unsigned int omap730_cpu_suspend_sz;
-extern unsigned int omap1510_cpu_suspend_sz;
-extern unsigned int omap1610_cpu_suspend_sz;
-extern unsigned int omap24xx_cpu_suspend_sz;
-extern unsigned int omap730_idle_loop_suspend_sz;
-extern unsigned int omap1510_idle_loop_suspend_sz;
-extern unsigned int omap1610_idle_loop_suspend_sz;
-extern unsigned int omap24xx_idle_loop_suspend_sz;
-
-#ifdef CONFIG_OMAP_SERIAL_WAKE
-extern void omap_serial_wake_trigger(int enable);
-#else
-#define omap_serial_wakeup_init()	{}
-#define omap_serial_wake_trigger(x)	{}
-#endif	/* CONFIG_OMAP_SERIAL_WAKE */
-
-#define ARM_SAVE(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] = omap_readl(x)
-#define ARM_RESTORE(x) omap_writel((arm_sleep_save[ARM_SLEEP_SAVE_##x]), (x))
-#define ARM_SHOW(x) arm_sleep_save[ARM_SLEEP_SAVE_##x]
-
-#define DSP_SAVE(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] = __raw_readw(x)
-#define DSP_RESTORE(x) __raw_writew((dsp_sleep_save[DSP_SLEEP_SAVE_##x]), (x))
-#define DSP_SHOW(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x]
-
-#define ULPD_SAVE(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] = omap_readw(x)
-#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
-#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
-
-#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x)
-#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x))
-#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]
-
-#define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
-#define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
-#define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]
-
-#define MPUI1610_SAVE(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] = omap_readl(x)
-#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
-#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
-
-#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x
-#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-
-/*
- * List of global OMAP registers to preserve.
- * More ones like CP and general purpose register values are preserved
- * with the stack pointer in sleep.S.
- */
-
-enum arm_save_state {
-	ARM_SLEEP_SAVE_START = 0,
-	/*
-	 * MPU control registers 32 bits
-	 */
-	ARM_SLEEP_SAVE_ARM_CKCTL,
-	ARM_SLEEP_SAVE_ARM_IDLECT1,
-	ARM_SLEEP_SAVE_ARM_IDLECT2,
-	ARM_SLEEP_SAVE_ARM_IDLECT3,
-	ARM_SLEEP_SAVE_ARM_EWUPCT,
-	ARM_SLEEP_SAVE_ARM_RSTCT1,
-	ARM_SLEEP_SAVE_ARM_RSTCT2,
-	ARM_SLEEP_SAVE_ARM_SYSST,
-	ARM_SLEEP_SAVE_SIZE
-};
-
-enum dsp_save_state {
-	DSP_SLEEP_SAVE_START = 0,
-	/*
-	 * DSP registers 16 bits
-	 */
-	DSP_SLEEP_SAVE_DSP_IDLECT2,
-	DSP_SLEEP_SAVE_SIZE
-};
-
-enum ulpd_save_state {
-	ULPD_SLEEP_SAVE_START = 0,
-	/*
-	 * ULPD registers 16 bits
-	 */
-	ULPD_SLEEP_SAVE_ULPD_IT_STATUS,
-	ULPD_SLEEP_SAVE_ULPD_CLOCK_CTRL,
-	ULPD_SLEEP_SAVE_ULPD_SOFT_REQ,
-	ULPD_SLEEP_SAVE_ULPD_STATUS_REQ,
-	ULPD_SLEEP_SAVE_ULPD_DPLL_CTRL,
-	ULPD_SLEEP_SAVE_ULPD_POWER_CTRL,
-	ULPD_SLEEP_SAVE_SIZE
-};
-
-enum mpui1510_save_state {
-	MPUI1510_SLEEP_SAVE_START = 0,
-	/*
-	 * MPUI registers 32 bits
-	 */
-	MPUI1510_SLEEP_SAVE_MPUI_CTRL,
-	MPUI1510_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
-	MPUI1510_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
-	MPUI1510_SLEEP_SAVE_MPUI_DSP_STATUS,
-	MPUI1510_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
-	MPUI1510_SLEEP_SAVE_EMIFS_CONFIG,
-	MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR,
-	MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR,
-#if defined(CONFIG_ARCH_OMAP15XX)
-	MPUI1510_SLEEP_SAVE_SIZE
-#else
-	MPUI1510_SLEEP_SAVE_SIZE = 0
-#endif
-};
-
-enum mpui730_save_state {
-	MPUI730_SLEEP_SAVE_START = 0,
-	/*
-	 * MPUI registers 32 bits
-	 */
-	MPUI730_SLEEP_SAVE_MPUI_CTRL,
-	MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
-	MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
-	MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS,
-	MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
-	MPUI730_SLEEP_SAVE_EMIFS_CONFIG,
-	MPUI730_SLEEP_SAVE_OMAP_IH1_MIR,
-	MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR,
-	MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR,
-#if defined(CONFIG_ARCH_OMAP730)
-	MPUI730_SLEEP_SAVE_SIZE
-#else
-	MPUI730_SLEEP_SAVE_SIZE = 0
-#endif
-};
-
-enum mpui1610_save_state {
-	MPUI1610_SLEEP_SAVE_START = 0,
-	/*
-	 * MPUI registers 32 bits
-	 */
-	MPUI1610_SLEEP_SAVE_MPUI_CTRL,
-	MPUI1610_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
-	MPUI1610_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
-	MPUI1610_SLEEP_SAVE_MPUI_DSP_STATUS,
-	MPUI1610_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
-	MPUI1610_SLEEP_SAVE_EMIFS_CONFIG,
-	MPUI1610_SLEEP_SAVE_OMAP_IH1_MIR,
-	MPUI1610_SLEEP_SAVE_OMAP_IH2_0_MIR,
-	MPUI1610_SLEEP_SAVE_OMAP_IH2_1_MIR,
-	MPUI1610_SLEEP_SAVE_OMAP_IH2_2_MIR,
-	MPUI1610_SLEEP_SAVE_OMAP_IH2_3_MIR,
-#if defined(CONFIG_ARCH_OMAP16XX)
-	MPUI1610_SLEEP_SAVE_SIZE
-#else
-	MPUI1610_SLEEP_SAVE_SIZE = 0
-#endif
-};
-
-enum omap24xx_save_state {
-	OMAP24XX_SLEEP_SAVE_START = 0,
-	OMAP24XX_SLEEP_SAVE_INTC_MIR0,
-	OMAP24XX_SLEEP_SAVE_INTC_MIR1,
-	OMAP24XX_SLEEP_SAVE_INTC_MIR2,
-
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM,
-
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM,
-
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM,
-
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM,
-
-	OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
-	OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO3_OE,
-	OMAP24XX_SLEEP_SAVE_GPIO4_OE,
-	OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT,
-	OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0,
-	OMAP24XX_SLEEP_SAVE_SIZE
-};
-
-#endif /* ASSEMBLER */
-#endif /* __ASM_ARCH_OMAP_PM_H */
diff --git a/include/asm-arm/arch-omap/prcm.h b/include/asm-arm/arch-omap/prcm.h
deleted file mode 100644
index 7bcaf94..0000000
--- a/include/asm-arm/arch-omap/prcm.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/prcm.h
- *
- * Access definations for use in OMAP24XX clock and power management
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
-#define __ASM_ARM_ARCH_DPM_PRCM_H
-
-u32 omap_prcm_get_reset_sources(void);
-
-#endif
-
-
-
-
-
diff --git a/include/asm-arm/arch-omap/sdrc.h b/include/asm-arm/arch-omap/sdrc.h
deleted file mode 100644
index 673b396..0000000
--- a/include/asm-arm/arch-omap/sdrc.h
+++ /dev/null
@@ -1,75 +0,0 @@
-#ifndef ____ASM_ARCH_SDRC_H
-#define ____ASM_ARCH_SDRC_H
-
-/*
- * OMAP2/3 SDRC/SMS register definitions
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/arch/io.h>
-
-/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
-
-#define SDRC_SYSCONFIG		0x010
-#define SDRC_DLLA_CTRL		0x060
-#define SDRC_DLLA_STATUS	0x064
-#define SDRC_DLLB_CTRL		0x068
-#define SDRC_DLLB_STATUS	0x06C
-#define SDRC_POWER		0x070
-#define SDRC_MR_0		0x084
-#define SDRC_RFR_CTRL_0		0x0a4
-
-/*
- * These values represent the number of memory clock cycles between
- * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
- * rows per device, and include a subtraction of a 50 cycle window in the
- * event that the autorefresh command is delayed due to other SDRC activity.
- * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
- * counter reaches 0.
- *
- * These represent optimal values for common parts, it won't work for all.
- * As long as you scale down, most parameters are still work, they just
- * become sub-optimal. The RFR value goes in the opposite direction. If you
- * don't adjust it down as your clock period increases the refresh interval
- * will not be met. Setting all parameters for complete worst case may work,
- * but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration.	A dynamic call is
- * need for that as no single right value exists acorss production samples.
- *
- * Only the FULL speed values are given. Current code is such that rate
- * changes must be made at DPLLoutx2. The actual value adjustment for low
- * frequency operation will be handled by omap_set_performance()
- *
- * By having the boot loader boot up in the fastest L4 speed available likely
- * will result in something which you can switch between.
- */
-#define SDRC_RFR_CTRL_165MHz	(0x00044c00 | 1)
-#define SDRC_RFR_CTRL_133MHz	(0x0003de00 | 1)
-#define SDRC_RFR_CTRL_100MHz	(0x0002da01 | 1)
-#define SDRC_RFR_CTRL_110MHz	(0x0002da01 | 1) /* Need to calc */
-#define SDRC_RFR_CTRL_BYPASS	(0x00005000 | 1) /* Need to calc */
-
-
-/*
- * SMS register access
- */
-
-
-#define OMAP242X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
-#define OMAP243X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
-#define OMAP343X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
-
-/* SMS register offsets - read/write with sms_{read,write}_reg() */
-
-#define SMS_SYSCONFIG		0x010
-/* REVISIT: fill in other SMS registers here */
-
-#endif
diff --git a/include/asm-arm/arch-omap/serial.h b/include/asm-arm/arch-omap/serial.h
deleted file mode 100644
index 79a5297..0000000
--- a/include/asm-arm/arch-omap/serial.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/serial.h
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-#if defined(CONFIG_ARCH_OMAP1)
-/* OMAP1 serial ports */
-#define OMAP_UART1_BASE		0xfffb0000
-#define OMAP_UART2_BASE		0xfffb0800
-#define OMAP_UART3_BASE		0xfffb9800
-#elif defined(CONFIG_ARCH_OMAP2)
-/* OMAP2 serial ports */
-#define OMAP_UART1_BASE		0x4806a000
-#define OMAP_UART2_BASE		0x4806c000
-#define OMAP_UART3_BASE		0x4806e000
-#endif
-
-#define OMAP_MAX_NR_PORTS	3
-#define OMAP1510_BASE_BAUD	(12000000/16)
-#define OMAP16XX_BASE_BAUD	(48000000/16)
-
-#define is_omap_port(p)	({int __ret = 0;			\
-			if (p == IO_ADDRESS(OMAP_UART1_BASE) ||	\
-			    p == IO_ADDRESS(OMAP_UART2_BASE) ||	\
-			    p == IO_ADDRESS(OMAP_UART3_BASE))	\
-				__ret = 1;			\
-			__ret;					\
-			})
-
-#endif
diff --git a/include/asm-arm/arch-omap/sram.h b/include/asm-arm/arch-omap/sram.h
deleted file mode 100644
index be59f4a9..0000000
--- a/include/asm-arm/arch-omap/sram.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/sram.h
- *
- * Interface for functions that need to be run in internal SRAM
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_SRAM_H
-#define __ARCH_ARM_OMAP_SRAM_H
-
-extern int __init omap_sram_init(void);
-extern void * omap_sram_push(void * start, unsigned long size);
-extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
-
-extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-				u32 base_cs, u32 force_unlock);
-extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-				      u32 mem_type);
-extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-
-/* Do not use these */
-extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap1_sram_reprogram_clock_sz;
-
-extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap24xx_sram_reprogram_clock_sz;
-
-extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-						u32 base_cs, u32 force_unlock);
-extern unsigned long omap242x_sram_ddr_init_sz;
-
-extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
-						int bypass);
-extern unsigned long omap242x_sram_set_prcm_sz;
-
-extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-						u32 mem_type);
-extern unsigned long omap242x_sram_reprogram_sdrc_sz;
-
-
-extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-						u32 base_cs, u32 force_unlock);
-extern unsigned long omap243x_sram_ddr_init_sz;
-
-extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
-						int bypass);
-extern unsigned long omap243x_sram_set_prcm_sz;
-
-extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-						u32 mem_type);
-extern unsigned long omap243x_sram_reprogram_sdrc_sz;
-
-#endif
diff --git a/include/asm-arm/arch-omap/system.h b/include/asm-arm/arch-omap/system.h
deleted file mode 100644
index 176d9d6..0000000
--- a/include/asm-arm/arch-omap/system.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copied from linux/include/asm-arm/arch-sa1100/system.h
- * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <linux/clk.h>
-
-#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
-
-#ifndef CONFIG_MACH_VOICEBLUE
-#define voiceblue_reset()		do {} while (0)
-#endif
-
-extern void omap_prcm_arch_reset(char mode);
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void omap1_arch_reset(char mode)
-{
-	/*
-	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
-	 * "Global Software Reset Affects Traffic Controller Frequency".
-	 */
-	if (cpu_is_omap5912()) {
-		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4),
-				 DPLL_CTL);
-		omap_writew(0x8, ARM_RSTCT1);
-	}
-
-	if (machine_is_voiceblue())
-		voiceblue_reset();
-	else
-		omap_writew(1, ARM_RSTCT1);
-}
-
-static inline void arch_reset(char mode)
-{
-	if (!cpu_is_omap24xx())
-		omap1_arch_reset(mode);
-	else
-		omap_prcm_arch_reset(mode);
-}
-
-#endif
diff --git a/include/asm-arm/arch-omap/tc.h b/include/asm-arm/arch-omap/tc.h
deleted file mode 100644
index 65a9c82..0000000
--- a/include/asm-arm/arch-omap/tc.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/tc.h
- *
- * OMAP Traffic Controller
- *
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef __ASM_ARCH_TC_H
-#define __ASM_ARCH_TC_H
-
-#define TCMIF_BASE		0xfffecc00
-#define OMAP_TC_OCPT1_PRIOR	(TCMIF_BASE + 0x00)
-#define OMAP_TC_EMIFS_PRIOR	(TCMIF_BASE + 0x04)
-#define OMAP_TC_EMIFF_PRIOR	(TCMIF_BASE + 0x08)
-#define EMIFS_CONFIG		(TCMIF_BASE + 0x0c)
-#define EMIFS_CS0_CONFIG	(TCMIF_BASE + 0x10)
-#define EMIFS_CS1_CONFIG	(TCMIF_BASE + 0x14)
-#define EMIFS_CS2_CONFIG	(TCMIF_BASE + 0x18)
-#define EMIFS_CS3_CONFIG	(TCMIF_BASE + 0x1c)
-#define EMIFF_SDRAM_CONFIG	(TCMIF_BASE + 0x20)
-#define EMIFF_MRS		(TCMIF_BASE + 0x24)
-#define TC_TIMEOUT1		(TCMIF_BASE + 0x28)
-#define TC_TIMEOUT2		(TCMIF_BASE + 0x2c)
-#define TC_TIMEOUT3		(TCMIF_BASE + 0x30)
-#define TC_ENDIANISM		(TCMIF_BASE + 0x34)
-#define EMIFF_SDRAM_CONFIG_2	(TCMIF_BASE + 0x3c)
-#define EMIF_CFG_DYNAMIC_WS	(TCMIF_BASE + 0x40)
-#define EMIFS_ACS0		(TCMIF_BASE + 0x50)
-#define EMIFS_ACS1		(TCMIF_BASE + 0x54)
-#define EMIFS_ACS2		(TCMIF_BASE + 0x58)
-#define EMIFS_ACS3		(TCMIF_BASE + 0x5c)
-#define OMAP_TC_OCPT2_PRIOR	(TCMIF_BASE + 0xd0)
-
-/* external EMIFS chipselect regions */
-#define	OMAP_CS0_PHYS		0x00000000
-#define	OMAP_CS0_SIZE		SZ_64M
-
-#define	OMAP_CS1_PHYS		0x04000000
-#define	OMAP_CS1_SIZE		SZ_64M
-
-#define	OMAP_CS1A_PHYS		OMAP_CS1_PHYS
-#define	OMAP_CS1A_SIZE		SZ_32M
-
-#define	OMAP_CS1B_PHYS		(OMAP_CS1A_PHYS + OMAP_CS1A_SIZE)
-#define	OMAP_CS1B_SIZE		SZ_32M
-
-#define	OMAP_CS2_PHYS		0x08000000
-#define	OMAP_CS2_SIZE		SZ_64M
-
-#define	OMAP_CS2A_PHYS		OMAP_CS2_PHYS
-#define	OMAP_CS2A_SIZE		SZ_32M
-
-#define	OMAP_CS2B_PHYS		(OMAP_CS2A_PHYS + OMAP_CS2A_SIZE)
-#define	OMAP_CS2B_SIZE		SZ_32M
-
-#define	OMAP_CS3_PHYS		0x0c000000
-#define	OMAP_CS3_SIZE		SZ_64M
-
-#ifndef	__ASSEMBLER__
-
-/* EMIF Slow Interface Configuration Register */
-#define OMAP_EMIFS_CONFIG_FR		(1 << 4)
-#define OMAP_EMIFS_CONFIG_PDE		(1 << 3)
-#define OMAP_EMIFS_CONFIG_PWD_EN	(1 << 2)
-#define OMAP_EMIFS_CONFIG_BM		(1 << 1)
-#define OMAP_EMIFS_CONFIG_WP		(1 << 0)
-
-#define EMIFS_CCS(n)		(EMIFS_CS0_CONFIG + (4 * (n)))
-#define EMIFS_ACS(n)		(EMIFS_ACS0 + (4 * (n)))
-
-/* Almost all documentation for chip and board memory maps assumes
- * BM is clear.  Most devel boards have a switch to control booting
- * from NOR flash (using external chipselect 3) rather than mask ROM,
- * which uses BM to interchange the physical CS0 and CS3 addresses.
- */
-static inline u32 omap_cs0_phys(void)
-{
-	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
-			?  OMAP_CS3_PHYS : 0;
-}
-
-static inline u32 omap_cs3_phys(void)
-{
-	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
-			? 0 : OMAP_CS3_PHYS;
-}
-
-#endif	/* __ASSEMBLER__ */
-
-#endif	/* __ASM_ARCH_TC_H */
diff --git a/include/asm-arm/arch-omap/timex.h b/include/asm-arm/arch-omap/timex.h
deleted file mode 100644
index 21f2e36..0000000
--- a/include/asm-arm/arch-omap/timex.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/timex.h
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author:  Greg Lonnon <glonnon@ridgerun.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#if !defined(__ASM_ARCH_OMAP_TIMEX_H)
-#define __ASM_ARCH_OMAP_TIMEX_H
-
-/*
- * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer,
- * and that's why the CLOCK_TICK_RATE is not 32768.
- */
-#ifdef CONFIG_OMAP_32K_TIMER
-#define CLOCK_TICK_RATE		(CONFIG_OMAP_32K_TIMER_HZ)
-#else
-#define CLOCK_TICK_RATE		(HZ * 100000UL)
-#endif
-
-#endif /* __ASM_ARCH_OMAP_TIMEX_H */
diff --git a/include/asm-arm/arch-omap/uncompress.h b/include/asm-arm/arch-omap/uncompress.h
deleted file mode 100644
index aca0adf..0000000
--- a/include/asm-arm/arch-omap/uncompress.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/uncompress.h
- *
- * Serial port stubs for kernel decompress status messages
- *
- * Initially based on:
- * linux-2.4.15-rmk1-dsplinux1.6/include/asm-arm/arch-omap1510/uncompress.h
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Rewritten by:
- * Author: <source@mvista.com>
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-#include <asm/arch/serial.h>
-
-unsigned int system_rev;
-
-#define UART_OMAP_MDR1		0x08	/* mode definition register */
-#define OMAP_ID_730		0x355F
-#define ID_MASK			0x7fff
-#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
-#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
-
-static void putc(int c)
-{
-	volatile u8 * uart = 0;
-	int shift = 2;
-
-#ifdef CONFIG_MACH_OMAP_PALMTE
-	return;
-#endif
-
-#ifdef CONFIG_ARCH_OMAP
-#ifdef	CONFIG_OMAP_LL_DEBUG_UART3
-	uart = (volatile u8 *)(OMAP_UART3_BASE);
-#elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
-	uart = (volatile u8 *)(OMAP_UART2_BASE);
-#else
-	uart = (volatile u8 *)(OMAP_UART1_BASE);
-#endif
-
-#ifdef CONFIG_ARCH_OMAP1
-	/* Determine which serial port to use */
-	do {
-		/* MMU is not on, so cpu_is_omapXXXX() won't work here */
-		unsigned int omap_id = omap_get_id();
-
-		if (omap_id == OMAP_ID_730)
-			shift = 0;
-
-		if (check_port(uart, shift))
-			break;
-		/* Silent boot if no serial ports are enabled. */
-		return;
-	} while (0);
-#endif /* CONFIG_ARCH_OMAP1 */
-#endif
-
-	/*
-	 * Now, xmit each character
-	 */
-	while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
-		barrier();
-	uart[UART_TX << shift] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-omap/usb.h b/include/asm-arm/arch-omap/usb.h
deleted file mode 100644
index ddf1861..0000000
--- a/include/asm-arm/arch-omap/usb.h
+++ /dev/null
@@ -1,141 +0,0 @@
-// include/asm-arm/mach-omap/usb.h
-
-#ifndef	__ASM_ARCH_OMAP_USB_H
-#define	__ASM_ARCH_OMAP_USB_H
-
-#include <asm/arch/board.h>
-
-/*-------------------------------------------------------------------------*/
-
-#define OMAP1_OTG_BASE			0xfffb0400
-#define OMAP1_UDC_BASE			0xfffb4000
-#define OMAP1_OHCI_BASE			0xfffba000
-
-#define OMAP2_OHCI_BASE			0x4805e000
-#define OMAP2_UDC_BASE			0x4805e200
-#define OMAP2_OTG_BASE			0x4805e300
-
-#ifdef CONFIG_ARCH_OMAP1
-
-#define OTG_BASE			OMAP1_OTG_BASE
-#define UDC_BASE			OMAP1_UDC_BASE
-#define OMAP_OHCI_BASE			OMAP1_OHCI_BASE
-
-#else
-
-#define OTG_BASE			OMAP2_OTG_BASE
-#define UDC_BASE			OMAP2_UDC_BASE
-#define OMAP_OHCI_BASE			OMAP2_OHCI_BASE
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * OTG and transceiver registers, for OMAPs starting with ARM926
- */
-#define OTG_REV				(OTG_BASE + 0x00)
-#define OTG_SYSCON_1			(OTG_BASE + 0x04)
-#	define	 USB2_TRX_MODE(w)	(((w)>>24)&0x07)
-#	define	 USB1_TRX_MODE(w)	(((w)>>20)&0x07)
-#	define	 USB0_TRX_MODE(w)	(((w)>>16)&0x07)
-#	define	 OTG_IDLE_EN		(1 << 15)
-#	define	 HST_IDLE_EN		(1 << 14)
-#	define	 DEV_IDLE_EN		(1 << 13)
-#	define	 OTG_RESET_DONE		(1 << 2)
-#	define	 OTG_SOFT_RESET		(1 << 1)
-#define OTG_SYSCON_2			(OTG_BASE + 0x08)
-#	define	 OTG_EN			(1 << 31)
-#	define	 USBX_SYNCHRO		(1 << 30)
-#	define	 OTG_MST16		(1 << 29)
-#	define	 SRP_GPDATA		(1 << 28)
-#	define	 SRP_GPDVBUS		(1 << 27)
-#	define	 SRP_GPUVBUS(w)		(((w)>>24)&0x07)
-#	define	 A_WAIT_VRISE(w)	(((w)>>20)&0x07)
-#	define	 B_ASE_BRST(w)		(((w)>>16)&0x07)
-#	define	 SRP_DPW		(1 << 14)
-#	define	 SRP_DATA		(1 << 13)
-#	define	 SRP_VBUS		(1 << 12)
-#	define	 OTG_PADEN		(1 << 10)
-#	define	 HMC_PADEN		(1 << 9)
-#	define	 UHOST_EN		(1 << 8)
-#	define	 HMC_TLLSPEED		(1 << 7)
-#	define	 HMC_TLLATTACH		(1 << 6)
-#	define	 OTG_HMC(w)		(((w)>>0)&0x3f)
-#define OTG_CTRL			(OTG_BASE + 0x0c)
-#	define	 OTG_USB2_EN		(1 << 29)
-#	define	 OTG_USB2_DP		(1 << 28)
-#	define	 OTG_USB2_DM		(1 << 27)
-#	define	 OTG_USB1_EN		(1 << 26)
-#	define	 OTG_USB1_DP		(1 << 25)
-#	define	 OTG_USB1_DM		(1 << 24)
-#	define	 OTG_USB0_EN		(1 << 23)
-#	define	 OTG_USB0_DP		(1 << 22)
-#	define	 OTG_USB0_DM		(1 << 21)
-#	define	 OTG_ASESSVLD		(1 << 20)
-#	define	 OTG_BSESSEND		(1 << 19)
-#	define	 OTG_BSESSVLD		(1 << 18)
-#	define	 OTG_VBUSVLD		(1 << 17)
-#	define	 OTG_ID			(1 << 16)
-#	define	 OTG_DRIVER_SEL		(1 << 15)
-#	define	 OTG_A_SETB_HNPEN	(1 << 12)
-#	define	 OTG_A_BUSREQ		(1 << 11)
-#	define	 OTG_B_HNPEN		(1 << 9)
-#	define	 OTG_B_BUSREQ		(1 << 8)
-#	define	 OTG_BUSDROP		(1 << 7)
-#	define	 OTG_PULLDOWN		(1 << 5)
-#	define	 OTG_PULLUP		(1 << 4)
-#	define	 OTG_DRV_VBUS		(1 << 3)
-#	define	 OTG_PD_VBUS		(1 << 2)
-#	define	 OTG_PU_VBUS		(1 << 1)
-#	define	 OTG_PU_ID		(1 << 0)
-#define OTG_IRQ_EN			(OTG_BASE + 0x10)	/* 16-bit */
-#	define	 DRIVER_SWITCH		(1 << 15)
-#	define	 A_VBUS_ERR		(1 << 13)
-#	define	 A_REQ_TMROUT		(1 << 12)
-#	define	 A_SRP_DETECT		(1 << 11)
-#	define	 B_HNP_FAIL		(1 << 10)
-#	define	 B_SRP_TMROUT		(1 << 9)
-#	define	 B_SRP_DONE		(1 << 8)
-#	define	 B_SRP_STARTED		(1 << 7)
-#	define	 OPRT_CHG		(1 << 0)
-#define OTG_IRQ_SRC			(OTG_BASE + 0x14)	/* 16-bit */
-	// same bits as in IRQ_EN
-#define OTG_OUTCTRL			(OTG_BASE + 0x18)	/* 16-bit */
-#	define	 OTGVPD			(1 << 14)
-#	define	 OTGVPU			(1 << 13)
-#	define	 OTGPUID		(1 << 12)
-#	define	 USB2VDR		(1 << 10)
-#	define	 USB2PDEN		(1 << 9)
-#	define	 USB2PUEN		(1 << 8)
-#	define	 USB1VDR		(1 << 6)
-#	define	 USB1PDEN		(1 << 5)
-#	define	 USB1PUEN		(1 << 4)
-#	define	 USB0VDR		(1 << 2)
-#	define	 USB0PDEN		(1 << 1)
-#	define	 USB0PUEN		(1 << 0)
-#define OTG_TEST			(OTG_BASE + 0x20)	/* 16-bit */
-#define OTG_VENDOR_CODE			(OTG_BASE + 0xfc)	/* 16-bit */
-
-/*-------------------------------------------------------------------------*/
-
-/* OMAP1 */
-#define	USB_TRANSCEIVER_CTRL		(0xfffe1000 + 0x0064)
-#	define	CONF_USB2_UNI_R		(1 << 8)
-#	define	CONF_USB1_UNI_R		(1 << 7)
-#	define	CONF_USB_PORT0_R(x)	(((x)>>4)&0x7)
-#	define	CONF_USB0_ISOLATE_R	(1 << 3)
-#	define	CONF_USB_PWRDN_DM_R	(1 << 2)
-#	define	CONF_USB_PWRDN_DP_R	(1 << 1)
-
-/* OMAP2 */
-#	define	USB_UNIDIR			0x0
-#	define	USB_UNIDIR_TLL			0x1
-#	define	USB_BIDIR			0x2
-#	define	USB_BIDIR_TLL			0x3
-#	define	USBTXWRMODEI(port, x)	((x) << (22 - (port * 2)))
-#	define	USBT2TLL5PI		(1 << 17)
-#	define	USB0PUENACTLOI		(1 << 16)
-#	define	USBSTANDBYCTRL		(1 << 15)
-
-#endif	/* __ASM_ARCH_OMAP_USB_H */
diff --git a/include/asm-arm/arch-omap/vmalloc.h b/include/asm-arm/arch-omap/vmalloc.h
deleted file mode 100644
index 5b8bd8d..0000000
--- a/include/asm-arm/arch-omap/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/vmalloc.h
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
-
diff --git a/include/asm-arm/arch-orion5x/debug-macro.S b/include/asm-arm/arch-orion5x/debug-macro.S
deleted file mode 100644
index 4f98f3b..0000000
--- a/include/asm-arm/arch-orion5x/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/debug-macro.S
- *
- * Debugging macro include header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/orion5x.h>
-
-	.macro  addruart,rx
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =ORION5X_REGS_PHYS_BASE
-	ldrne	\rx, =ORION5X_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-orion5x/dma.h b/include/asm-arm/arch-orion5x/dma.h
deleted file mode 100644
index 40a8c178..0000000
--- a/include/asm-arm/arch-orion5x/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/include/asm-arm/arch-orion5x/entry-macro.S b/include/asm-arm/arch-orion5x/entry-macro.S
deleted file mode 100644
index d8ef54c..0000000
--- a/include/asm-arm/arch-orion5x/entry-macro.S
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/entry-macro.S
- *
- * Low-level IRQ helper macros for Orion platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/arch/orion5x.h>
-
-	.macro  disable_fiq
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =MAIN_IRQ_CAUSE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqstat, [\base, #0]		@ main cause
-	ldr	\tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask
-	mov	\irqnr, #0			@ default irqnr
-	@ find cause bits that are unmasked
-	ands	\irqstat, \irqstat, \tmp	@ clear Z flag if any
-	clzne	\irqnr,	\irqstat		@ calc irqnr
-	rsbne	\irqnr, \irqnr, #31
-	.endm
diff --git a/include/asm-arm/arch-orion5x/gpio.h b/include/asm-arm/arch-orion5x/gpio.h
deleted file mode 100644
index c85e498..0000000
--- a/include/asm-arm/arch-orion5x/gpio.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-extern int gpio_request(unsigned pin, const char *label);
-extern void gpio_free(unsigned pin);
-extern int gpio_direction_input(unsigned pin);
-extern int gpio_direction_output(unsigned pin, int value);
-extern int gpio_get_value(unsigned pin);
-extern void gpio_set_value(unsigned pin, int value);
-extern void orion5x_gpio_set_blink(unsigned pin, int blink);
-extern void gpio_display(void);		/* debug */
-
-static inline int gpio_to_irq(int pin)
-{
-	return pin + IRQ_ORION5X_GPIO_START;
-}
-
-static inline int irq_to_gpio(int irq)
-{
-	return irq - IRQ_ORION5X_GPIO_START;
-}
-
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
diff --git a/include/asm-arm/arch-orion5x/hardware.h b/include/asm-arm/arch-orion5x/hardware.h
deleted file mode 100644
index 5d2d8e0..0000000
--- a/include/asm-arm/arch-orion5x/hardware.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "orion5x.h"
-
-#define pcibios_assign_all_busses()	1
-
-#define PCIBIOS_MIN_IO		0x00001000
-#define PCIBIOS_MIN_MEM		0x01000000
-#define PCIMEM_BASE		ORION5X_PCIE_MEM_PHYS_BASE
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/io.h b/include/asm-arm/arch-orion5x/io.h
deleted file mode 100644
index 59f1bc9..0000000
--- a/include/asm-arm/arch-orion5x/io.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/io.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "orion5x.h"
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-static inline void __iomem *
-__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
-{
-	void __iomem *retval;
-	unsigned long offs = paddr - ORION5X_REGS_PHYS_BASE;
-	if (mtype == MT_DEVICE && size && offs < ORION5X_REGS_SIZE &&
-	    size <= ORION5X_REGS_SIZE && offs + size <= ORION5X_REGS_SIZE) {
-		retval = (void __iomem *)ORION5X_REGS_VIRT_BASE + offs;
-	} else {
-		retval = __arm_ioremap(paddr, size, mtype);
-	}
-
-	return retval;
-}
-
-static inline void
-__arch_iounmap(void __iomem *addr)
-{
-	if (addr < (void __iomem *)ORION5X_REGS_VIRT_BASE ||
-	    addr >= (void __iomem *)(ORION5X_REGS_VIRT_BASE + ORION5X_REGS_SIZE))
-		__iounmap(addr);
-}
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-
-#define __arch_ioremap(p, s, m)	__arch_ioremap(p, s, m)
-#define __arch_iounmap(a)	__arch_iounmap(a)
-#define __io(a)			__io(a)
-#define __mem_pci(a)		(a)
-
-
-/*****************************************************************************
- * Helpers to access Orion registers
- ****************************************************************************/
-/*
- * These are not preempt-safe.  Locks, if needed, must be taken
- * care of by the caller.
- */
-#define orion5x_setbits(r, mask)	writel(readl(r) | (mask), (r))
-#define orion5x_clrbits(r, mask)	writel(readl(r) & ~(mask), (r))
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/irqs.h b/include/asm-arm/arch-orion5x/irqs.h
deleted file mode 100644
index abdd61a..0000000
--- a/include/asm-arm/arch-orion5x/irqs.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/irqs.h
- *
- * IRQ definitions for Orion SoC
- *
- *  Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- *  This file is licensed under the terms of the GNU General Public
- *  License version 2. This program is licensed "as is" without any
- *  warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include "orion5x.h"	/* need GPIO_MAX */
-
-/*
- * Orion Main Interrupt Controller
- */
-#define IRQ_ORION5X_BRIDGE		0
-#define IRQ_ORION5X_DOORBELL_H2C	1
-#define IRQ_ORION5X_DOORBELL_C2H	2
-#define IRQ_ORION5X_UART0		3
-#define IRQ_ORION5X_UART1		4
-#define IRQ_ORION5X_I2C			5
-#define IRQ_ORION5X_GPIO_0_7		6
-#define IRQ_ORION5X_GPIO_8_15		7
-#define IRQ_ORION5X_GPIO_16_23		8
-#define IRQ_ORION5X_GPIO_24_31		9
-#define IRQ_ORION5X_PCIE0_ERR		10
-#define IRQ_ORION5X_PCIE0_INT		11
-#define IRQ_ORION5X_USB1_CTRL		12
-#define IRQ_ORION5X_DEV_BUS_ERR		14
-#define IRQ_ORION5X_PCI_ERR		15
-#define IRQ_ORION5X_USB_BR_ERR		16
-#define IRQ_ORION5X_USB0_CTRL		17
-#define IRQ_ORION5X_ETH_RX		18
-#define IRQ_ORION5X_ETH_TX		19
-#define IRQ_ORION5X_ETH_MISC		20
-#define IRQ_ORION5X_ETH_SUM		21
-#define IRQ_ORION5X_ETH_ERR		22
-#define IRQ_ORION5X_IDMA_ERR		23
-#define IRQ_ORION5X_IDMA_0		24
-#define IRQ_ORION5X_IDMA_1		25
-#define IRQ_ORION5X_IDMA_2		26
-#define IRQ_ORION5X_IDMA_3		27
-#define IRQ_ORION5X_CESA		28
-#define IRQ_ORION5X_SATA		29
-#define IRQ_ORION5X_XOR0		30
-#define IRQ_ORION5X_XOR1		31
-
-/*
- * Orion General Purpose Pins
- */
-#define IRQ_ORION5X_GPIO_START	32
-#define NR_GPIO_IRQS		GPIO_MAX
-
-#define NR_IRQS			(IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/memory.h b/include/asm-arm/arch-orion5x/memory.h
deleted file mode 100644
index 80053a7..0000000
--- a/include/asm-arm/arch-orion5x/memory.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/memory.h
- *
- * Marvell Orion memory definitions
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET	UL(0x00000000)
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/orion5x.h b/include/asm-arm/arch-orion5x/orion5x.h
deleted file mode 100644
index 10257f5..0000000
--- a/include/asm-arm/arch-orion5x/orion5x.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/orion5x.h
- *
- * Generic definitions of Orion SoC flavors:
- *  Orion-1, Orion-VoIP, Orion-NAS, and Orion-2.
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_ORION5X_H
-#define __ASM_ARCH_ORION5X_H
-
-/*****************************************************************************
- * Orion Address Maps
- *
- * phys
- * e0000000	PCIe MEM space
- * e8000000	PCI MEM space
- * f0000000	PCIe WA space (Orion-1/Orion-NAS only)
- * f1000000	on-chip peripheral registers
- * f2000000	PCIe I/O space
- * f2100000	PCI I/O space
- * f4000000	device bus mappings (boot)
- * fa000000	device bus mappings (cs0)
- * fa800000	device bus mappings (cs2)
- * fc000000	device bus mappings (cs0/cs1)
- *
- * virt		phys		size
- * fdd00000	f1000000	1M	on-chip peripheral registers
- * fde00000	f2000000	1M	PCIe I/O space
- * fdf00000	f2100000	1M	PCI I/O space
- * fe000000	f0000000	16M	PCIe WA space (Orion-1/Orion-NAS only)
- ****************************************************************************/
-#define ORION5X_REGS_PHYS_BASE		0xf1000000
-#define ORION5X_REGS_VIRT_BASE		0xfdd00000
-#define ORION5X_REGS_SIZE		SZ_1M
-
-#define ORION5X_PCIE_IO_PHYS_BASE	0xf2000000
-#define ORION5X_PCIE_IO_VIRT_BASE	0xfde00000
-#define ORION5X_PCIE_IO_BUS_BASE	0x00000000
-#define ORION5X_PCIE_IO_SIZE		SZ_1M
-
-#define ORION5X_PCI_IO_PHYS_BASE	0xf2100000
-#define ORION5X_PCI_IO_VIRT_BASE	0xfdf00000
-#define ORION5X_PCI_IO_BUS_BASE		0x00100000
-#define ORION5X_PCI_IO_SIZE		SZ_1M
-
-/* Relevant only for Orion-1/Orion-NAS */
-#define ORION5X_PCIE_WA_PHYS_BASE	0xf0000000
-#define ORION5X_PCIE_WA_VIRT_BASE	0xfe000000
-#define ORION5X_PCIE_WA_SIZE		SZ_16M
-
-#define ORION5X_PCIE_MEM_PHYS_BASE	0xe0000000
-#define ORION5X_PCIE_MEM_SIZE		SZ_128M
-
-#define ORION5X_PCI_MEM_PHYS_BASE	0xe8000000
-#define ORION5X_PCI_MEM_SIZE		SZ_128M
-
-/*******************************************************************************
- * Supported Devices & Revisions
- ******************************************************************************/
-/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
-#define MV88F5181_DEV_ID	0x5181
-#define MV88F5181_REV_B1	3
-#define MV88F5181L_REV_A0	8
-#define MV88F5181L_REV_A1	9
-/* Orion-NAS (88F5182) */
-#define MV88F5182_DEV_ID	0x5182
-#define MV88F5182_REV_A2	2
-/* Orion-2 (88F5281) */
-#define MV88F5281_DEV_ID	0x5281
-#define MV88F5281_REV_D1	5
-#define MV88F5281_REV_D2	6
-
-/*******************************************************************************
- * Orion Registers Map
- ******************************************************************************/
-#define ORION5X_DDR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x00000)
-#define ORION5X_DDR_REG(x)		(ORION5X_DDR_VIRT_BASE | (x))
-
-#define ORION5X_DEV_BUS_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x10000)
-#define ORION5X_DEV_BUS_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x10000)
-#define ORION5X_DEV_BUS_REG(x)		(ORION5X_DEV_BUS_VIRT_BASE | (x))
-#define  I2C_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
-#define  UART0_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
-
-#define ORION5X_BRIDGE_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x20000)
-#define ORION5X_BRIDGE_REG(x)		(ORION5X_BRIDGE_VIRT_BASE | (x))
-#define  TIMER_VIRT_BASE		(ORION5X_BRIDGE_VIRT_BASE | 0x300)
-
-#define ORION5X_PCI_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x30000)
-#define ORION5X_PCI_REG(x)		(ORION5X_PCI_VIRT_BASE | (x))
-
-#define ORION5X_PCIE_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x40000)
-#define ORION5X_PCIE_REG(x)		(ORION5X_PCIE_VIRT_BASE | (x))
-
-#define ORION5X_USB0_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x50000)
-#define ORION5X_USB0_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x50000)
-#define ORION5X_USB0_REG(x)		(ORION5X_USB0_VIRT_BASE | (x))
-
-#define ORION5X_ETH_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x70000)
-#define ORION5X_ETH_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x70000)
-#define ORION5X_ETH_REG(x)		(ORION5X_ETH_VIRT_BASE | (x))
-
-#define ORION5X_SATA_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x80000)
-#define ORION5X_SATA_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x80000)
-#define ORION5X_SATA_REG(x)		(ORION5X_SATA_VIRT_BASE | (x))
-
-#define ORION5X_USB1_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0xa0000)
-#define ORION5X_USB1_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0xa0000)
-#define ORION5X_USB1_REG(x)		(ORION5X_USB1_VIRT_BASE | (x))
-
-/*******************************************************************************
- * Device Bus Registers
- ******************************************************************************/
-#define MPP_0_7_CTRL		ORION5X_DEV_BUS_REG(0x000)
-#define MPP_8_15_CTRL		ORION5X_DEV_BUS_REG(0x004)
-#define MPP_16_19_CTRL		ORION5X_DEV_BUS_REG(0x050)
-#define MPP_DEV_CTRL		ORION5X_DEV_BUS_REG(0x008)
-#define MPP_RESET_SAMPLE	ORION5X_DEV_BUS_REG(0x010)
-#define GPIO_OUT		ORION5X_DEV_BUS_REG(0x100)
-#define GPIO_IO_CONF		ORION5X_DEV_BUS_REG(0x104)
-#define GPIO_BLINK_EN		ORION5X_DEV_BUS_REG(0x108)
-#define GPIO_IN_POL		ORION5X_DEV_BUS_REG(0x10c)
-#define GPIO_DATA_IN		ORION5X_DEV_BUS_REG(0x110)
-#define GPIO_EDGE_CAUSE		ORION5X_DEV_BUS_REG(0x114)
-#define GPIO_EDGE_MASK		ORION5X_DEV_BUS_REG(0x118)
-#define GPIO_LEVEL_MASK		ORION5X_DEV_BUS_REG(0x11c)
-#define DEV_BANK_0_PARAM	ORION5X_DEV_BUS_REG(0x45c)
-#define DEV_BANK_1_PARAM	ORION5X_DEV_BUS_REG(0x460)
-#define DEV_BANK_2_PARAM	ORION5X_DEV_BUS_REG(0x464)
-#define DEV_BANK_BOOT_PARAM	ORION5X_DEV_BUS_REG(0x46c)
-#define DEV_BUS_CTRL		ORION5X_DEV_BUS_REG(0x4c0)
-#define DEV_BUS_INT_CAUSE	ORION5X_DEV_BUS_REG(0x4d0)
-#define DEV_BUS_INT_MASK	ORION5X_DEV_BUS_REG(0x4d4)
-#define GPIO_MAX		32
-
-/***************************************************************************
- * Orion CPU Bridge Registers
- **************************************************************************/
-#define CPU_CONF		ORION5X_BRIDGE_REG(0x100)
-#define CPU_CTRL		ORION5X_BRIDGE_REG(0x104)
-#define CPU_RESET_MASK		ORION5X_BRIDGE_REG(0x108)
-#define CPU_SOFT_RESET		ORION5X_BRIDGE_REG(0x10c)
-#define POWER_MNG_CTRL_REG	ORION5X_BRIDGE_REG(0x11C)
-#define BRIDGE_CAUSE		ORION5X_BRIDGE_REG(0x110)
-#define BRIDGE_MASK		ORION5X_BRIDGE_REG(0x114)
-#define  BRIDGE_INT_TIMER0	0x0002
-#define  BRIDGE_INT_TIMER1	0x0004
-#define  BRIDGE_INT_TIMER1_CLR	(~0x0004)
-#define MAIN_IRQ_CAUSE		ORION5X_BRIDGE_REG(0x200)
-#define MAIN_IRQ_MASK		ORION5X_BRIDGE_REG(0x204)
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/system.h b/include/asm-arm/arch-orion5x/system.h
deleted file mode 100644
index 3f1d1e2..0000000
--- a/include/asm-arm/arch-orion5x/system.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/system.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/orion5x.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	/*
-	 * Enable and issue soft reset
-	 */
-	orion5x_setbits(CPU_RESET_MASK, (1 << 2));
-	orion5x_setbits(CPU_SOFT_RESET, 1);
-}
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/timex.h b/include/asm-arm/arch-orion5x/timex.h
deleted file mode 100644
index 31c568e..0000000
--- a/include/asm-arm/arch-orion5x/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/timex.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE		(100 * HZ)
-
-#define ORION5X_TCLK		166666667
diff --git a/include/asm-arm/arch-orion5x/uncompress.h b/include/asm-arm/arch-orion5x/uncompress.h
deleted file mode 100644
index 7548ced..0000000
--- a/include/asm-arm/arch-orion5x/uncompress.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/uncompress.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/arch/orion5x.h>
-
-#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
-	unsigned char *base = SERIAL_BASE;
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		if (base[UART_LSR << 2] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
-	unsigned char *base = SERIAL_BASE;
-	unsigned char mask;
-	int i;
-
-	mask = UART_LSR_TEMT | UART_LSR_THRE;
-
-	for (i = 0; i < 0x1000; i++) {
-		if ((base[UART_LSR << 2] & mask) == mask)
-			break;
-		barrier();
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-orion5x/vmalloc.h b/include/asm-arm/arch-orion5x/vmalloc.h
deleted file mode 100644
index 2b3061e..0000000
--- a/include/asm-arm/arch-orion5x/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/vmalloc.h
- */
-
-#define VMALLOC_END       0xfd800000
diff --git a/include/asm-arm/arch-pnx4008/clock.h b/include/asm-arm/arch-pnx4008/clock.h
deleted file mode 100644
index ce155e1..0000000
--- a/include/asm-arm/arch-pnx4008/clock.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/clock.h
- *
- * Clock control driver for PNX4008 - header file
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __PNX4008_CLOCK_H__
-#define __PNX4008_CLOCK_H__
-
-struct module;
-struct clk;
-
-#define PWRMAN_VA_BASE		IO_ADDRESS(PNX4008_PWRMAN_BASE)
-#define HCLKDIVCTRL_REG		(PWRMAN_VA_BASE + 0x40)
-#define PWRCTRL_REG		(PWRMAN_VA_BASE + 0x44)
-#define PLLCTRL_REG		(PWRMAN_VA_BASE + 0x48)
-#define OSC13CTRL_REG		(PWRMAN_VA_BASE + 0x4c)
-#define SYSCLKCTRL_REG		(PWRMAN_VA_BASE + 0x50)
-#define HCLKPLLCTRL_REG		(PWRMAN_VA_BASE + 0x58)
-#define USBCTRL_REG		(PWRMAN_VA_BASE + 0x64)
-#define SDRAMCLKCTRL_REG	(PWRMAN_VA_BASE + 0x68)
-#define MSCTRL_REG		(PWRMAN_VA_BASE + 0x80)
-#define BTCLKCTRL		(PWRMAN_VA_BASE + 0x84)
-#define DUMCLKCTRL_REG		(PWRMAN_VA_BASE + 0x90)
-#define I2CCLKCTRL_REG		(PWRMAN_VA_BASE + 0xac)
-#define KEYCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb0)
-#define TSCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb4)
-#define PWMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb8)
-#define TIMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xbc)
-#define SPICTRL_REG		(PWRMAN_VA_BASE + 0xc4)
-#define FLASHCLKCTRL_REG	(PWRMAN_VA_BASE + 0xc8)
-#define UART3CLK_REG		(PWRMAN_VA_BASE + 0xd0)
-#define UARTCLKCTRL_REG		(PWRMAN_VA_BASE + 0xe4)
-#define DMACLKCTRL_REG		(PWRMAN_VA_BASE + 0xe8)
-#define AUTOCLK_CTRL		(PWRMAN_VA_BASE + 0xec)
-#define JPEGCLKCTRL_REG		(PWRMAN_VA_BASE + 0xfc)
-
-#define AUDIOCONFIG_VA_BASE	IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE)
-#define DSPPLLCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x60)
-#define DSPCLKCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x64)
-#define AUDIOCLKCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x68)
-#define AUDIOPLLCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x6C)
-
-#define USB_OTG_CLKCTRL_REG	IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4)
-
-#define VFP9CLKCTRL_REG		IO_ADDRESS(PNX4008_DEBUG_BASE)
-
-#define CLK_RATE_13MHZ 13000
-#define CLK_RATE_1MHZ 1000
-#define CLK_RATE_208MHZ 208000
-#define CLK_RATE_48MHZ 48000
-#define CLK_RATE_32KHZ 32
-
-#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/debug-macro.S b/include/asm-arm/arch-pnx4008/debug-macro.S
deleted file mode 100644
index 67d18a2..0000000
--- a/include/asm-arm/arch-pnx4008/debug-macro.S
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/include/asm-arm/arch-pnx4008/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		mov	\rx, #0x00090000
-		addeq	\rx, \rx, #0x40000000
-		addne	\rx, \rx, #0xf4000000
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-pnx4008/dma.h b/include/asm-arm/arch-pnx4008/dma.h
deleted file mode 100644
index 418f152..0000000
--- a/include/asm-arm/arch-pnx4008/dma.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pnx4008/dma.h
- *
- *  PNX4008 DMA header file
- *
- *  Author:	Vitaly Wool
- *  Copyright:	MontaVista Software Inc. (c) 2005
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include "platform.h"
-
-#define MAX_DMA_ADDRESS		0xffffffff
-
-#define MAX_DMA_CHANNELS	8
-
-#define DMAC_BASE		IO_ADDRESS(PNX4008_DMA_CONFIG_BASE)
-#define DMAC_INT_STAT		(DMAC_BASE + 0x0000)
-#define DMAC_INT_TC_STAT	(DMAC_BASE + 0x0004)
-#define DMAC_INT_TC_CLEAR	(DMAC_BASE + 0x0008)
-#define DMAC_INT_ERR_STAT	(DMAC_BASE + 0x000c)
-#define DMAC_INT_ERR_CLEAR	(DMAC_BASE + 0x0010)
-#define DMAC_SOFT_SREQ		(DMAC_BASE + 0x0024)
-#define DMAC_CONFIG		(DMAC_BASE + 0x0030)
-#define DMAC_Cx_SRC_ADDR(c)	(DMAC_BASE + 0x0100 + (c) * 0x20)
-#define DMAC_Cx_DEST_ADDR(c)	(DMAC_BASE + 0x0104 + (c) * 0x20)
-#define DMAC_Cx_LLI(c)		(DMAC_BASE + 0x0108 + (c) * 0x20)
-#define DMAC_Cx_CONTROL(c)	(DMAC_BASE + 0x010c + (c) * 0x20)
-#define DMAC_Cx_CONFIG(c)	(DMAC_BASE + 0x0110 + (c) * 0x20)
-
-enum {
-	WIDTH_BYTE = 0,
-	WIDTH_HWORD,
-	WIDTH_WORD
-};
-
-enum {
-	FC_MEM2MEM_DMA,
-	FC_MEM2PER_DMA,
-	FC_PER2MEM_DMA,
-	FC_PER2PER_DMA,
-	FC_PER2PER_DPER,
-	FC_MEM2PER_PER,
-	FC_PER2MEM_PER,
-	FC_PER2PER_SPER
-};
-
-enum {
-	DMA_INT_UNKNOWN = 0,
-	DMA_ERR_INT = 1,
-	DMA_TC_INT = 2,
-};
-
-enum {
-	DMA_BUFFER_ALLOCATED = 1,
-	DMA_HAS_LL = 2,
-};
-
-enum {
-	PER_CAM_DMA_1 = 0,
-	PER_NDF_FLASH = 1,
-	PER_MBX_SLAVE_FIFO = 2,
-	PER_SPI2_REC_XMIT = 3,
-	PER_MS_SD_RX_XMIT = 4,
-	PER_HS_UART_1_XMIT = 5,
-	PER_HS_UART_1_RX = 6,
-	PER_HS_UART_2_XMIT = 7,
-	PER_HS_UART_2_RX = 8,
-	PER_HS_UART_7_XMIT = 9,
-	PER_HS_UART_7_RX = 10,
-	PER_SPI1_REC_XMIT = 11,
-	PER_MLC_NDF_SREC = 12,
-	PER_CAM_DMA_2 = 13,
-	PER_PRNG_INFIFO = 14,
-	PER_PRNG_OUTFIFO = 15,
-};
-
-struct pnx4008_dma_ch_ctrl {
-	int tc_mask;
-	int cacheable;
-	int bufferable;
-	int priv_mode;
-	int di;
-	int si;
-	int dest_ahb1;
-	int src_ahb1;
-	int dwidth;
-	int swidth;
-	int dbsize;
-	int sbsize;
-	int tr_size;
-};
-
-struct pnx4008_dma_ch_config {
-	int halt;
-	int active;
-	int lock;
-	int itc;
-	int ie;
-	int flow_cntrl;
-	int dest_per;
-	int src_per;
-};
-
-struct pnx4008_dma_ll {
-	unsigned long src_addr;
-	unsigned long dest_addr;
-	u32 next_dma;
-	unsigned long ch_ctrl;
-	struct pnx4008_dma_ll *next;
-	int flags;
-	void *alloc_data;
-	int (*free) (void *);
-};
-
-struct pnx4008_dma_config {
-	int is_ll;
-	unsigned long src_addr;
-	unsigned long dest_addr;
-	unsigned long ch_ctrl;
-	unsigned long ch_cfg;
-	struct pnx4008_dma_ll *ll;
-	u32 ll_dma;
-	int flags;
-	void *alloc_data;
-	int (*free) (void *);
-};
-
-extern struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t *);
-extern void pnx4008_free_ll_entry(struct pnx4008_dma_ll *, dma_addr_t);
-extern void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll *);
-
-extern int pnx4008_request_channel(char *, int,
-				   void (*)(int, int, void *),
-				   void *);
-extern void pnx4008_free_channel(int);
-extern int pnx4008_config_dma(int, int, int);
-extern int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl *,
-				    unsigned long *);
-extern int pnx4008_dma_parse_control(unsigned long,
-				     struct pnx4008_dma_ch_ctrl *);
-extern int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config *,
-				   unsigned long *);
-extern int pnx4008_dma_parse_config(unsigned long,
-				    struct pnx4008_dma_ch_config *);
-extern int pnx4008_config_channel(int, struct pnx4008_dma_config *);
-extern int pnx4008_channel_get_config(int, struct pnx4008_dma_config *);
-extern int pnx4008_dma_ch_enable(int);
-extern int pnx4008_dma_ch_disable(int);
-extern int pnx4008_dma_ch_enabled(int);
-extern void pnx4008_dma_split_head_entry(struct pnx4008_dma_config *,
-					 struct pnx4008_dma_ch_ctrl *);
-extern void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll *,
-				       struct pnx4008_dma_ch_ctrl *);
-
-#endif				/* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-pnx4008/entry-macro.S b/include/asm-arm/arch-pnx4008/entry-macro.S
deleted file mode 100644
index f117319..0000000
--- a/include/asm-arm/arch-pnx4008/entry-macro.S
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/entry-macro.S
- *
- * Low-level IRQ helper macros for PNX4008-based platforms
- *
- * 2005-2006 (c) MontaVista Software, Inc.
- * Author: Vitaly Wool <vwool@ru.mvista.com>
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "platform.h"
-
-#define IO_BASE         0xF0000000
-#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
-
-#define INTRC_MASK			0x00
-#define INTRC_RAW_STAT			0x04
-#define INTRC_STAT			0x08
-#define INTRC_POLAR			0x0C
-#define INTRC_ACT_TYPE			0x10
-#define INTRC_TYPE			0x14
-
-#define SIC1_BASE_INT   32
-#define SIC2_BASE_INT   64
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-/* decode the MIC interrupt numbers */
-		ldr	\base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
-		ldr	\irqstat, [\base, #INTRC_STAT]
-
-		cmp	\irqstat,#1<<16
-		movhs	\irqnr,#16
-		movlo	\irqnr,#0
-		movhs	\irqstat,\irqstat,lsr#16
-		cmp	\irqstat,#1<<8
-		addhs	\irqnr,\irqnr,#8
-		movhs	\irqstat,\irqstat,lsr#8
-		cmp	\irqstat,#1<<4
-		addhs	\irqnr,\irqnr,#4
-		movhs	\irqstat,\irqstat,lsr#4
-		cmp	\irqstat,#1<<2
-		addhs	\irqnr,\irqnr,#2
-		movhs	\irqstat,\irqstat,lsr#2
-		cmp	\irqstat,#1<<1
-		addhs	\irqnr,\irqnr,#1
-
-/* was there an interrupt ? if not then drop out with EQ status */
-		teq	\irqstat,#0
-		beq	1003f
-
-/* and now check for extended IRQ reasons */
-		cmp	\irqnr,#1
-		bls	1003f
-		cmp	\irqnr,#30
-		blo	1002f
-
-/* IRQ 31,30  : High priority cascade IRQ handle */
-/* read the correct SIC */
-/* decoding status after compare : eq is 30 (SIC1) , ne is 31 (SIC2) */
-/* set the base IRQ number */
-		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-		moveq  \irqnr,#SIC1_BASE_INT
-		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-		movne   \irqnr,#SIC2_BASE_INT
-		ldr	\irqstat, [\base, #INTRC_STAT]
-		ldr	\tmp,	  [\base, #INTRC_TYPE]
-/* and with inverted mask : low priority interrupts  */
-		and	\irqstat,\irqstat,\tmp
-		b	1004f
-
-1003:
-/* IRQ 1,0  : Low priority cascade IRQ handle */
-/* read the correct SIC */
-/* decoding status after compare : eq is 1 (SIC2) , ne is 0 (SIC1)*/
-/* read the correct SIC */
-/* set the base IRQ number  */
-		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-		movne   \irqnr,#SIC1_BASE_INT
-		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-		moveq   \irqnr,#SIC2_BASE_INT
-		ldr	\irqstat, [\base, #INTRC_STAT]
-		ldr	\tmp,	  [\base, #INTRC_TYPE]
-/* and with inverted mask : low priority interrupts  */
-		bic	\irqstat,\irqstat,\tmp
-
-1004:
-
-		cmp	\irqstat,#1<<16
-		addhs	\irqnr,\irqnr,#16
-		movhs	\irqstat,\irqstat,lsr#16
-		cmp	\irqstat,#1<<8
-		addhs	\irqnr,\irqnr,#8
-		movhs	\irqstat,\irqstat,lsr#8
-		cmp	\irqstat,#1<<4
-		addhs	\irqnr,\irqnr,#4
-		movhs	\irqstat,\irqstat,lsr#4
-		cmp	\irqstat,#1<<2
-		addhs	\irqnr,\irqnr,#2
-		movhs	\irqstat,\irqstat,lsr#2
-		cmp	\irqstat,#1<<1
-		addhs	\irqnr,\irqnr,#1
-
-
-/* is irqstat not zero */
-
-1002:
-/* we assert that irqstat is not equal to zero and return ne status if true*/
-		teq	\irqstat,#0
-1003:
-		.endm
-
-
-		.macro	irq_prio_table
-		.endm
-
-
diff --git a/include/asm-arm/arch-pnx4008/gpio.h b/include/asm-arm/arch-pnx4008/gpio.h
deleted file mode 100644
index d01bf83..0000000
--- a/include/asm-arm/arch-pnx4008/gpio.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/gpio.h
- *
- * PNX4008 GPIO driver - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
- * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef _PNX4008_GPIO_H_
-#define _PNX4008_GPIO_H_
-
-
-/* Block numbers */
-#define GPIO_IN		(0)
-#define GPIO_OUT		(0x100)
-#define GPIO_BID		(0x200)
-#define GPIO_RAM		(0x300)
-#define GPIO_MUX		(0x400)
-
-#define GPIO_TYPE_MASK(K) ((K) & 0x700)
-
-/* INPUT GPIOs */
-/* GPI */
-#define GPI_00		(GPIO_IN | 0)
-#define GPI_01		(GPIO_IN | 1)
-#define GPI_02   	(GPIO_IN | 2)
-#define GPI_03 	 	(GPIO_IN | 3)
-#define GPI_04   	(GPIO_IN | 4)
-#define GPI_05   	(GPIO_IN | 5)
-#define GPI_06   	(GPIO_IN | 6)
-#define GPI_07   	(GPIO_IN | 7)
-#define GPI_08   	(GPIO_IN | 8)
-#define GPI_09   	(GPIO_IN | 9)
-#define U1_RX 		(GPIO_IN | 15)
-#define U2_HTCS 	(GPIO_IN | 16)
-#define U2_RX	 	(GPIO_IN | 17)
-#define U3_RX		(GPIO_IN | 18)
-#define U4_RX		(GPIO_IN | 19)
-#define U5_RX		(GPIO_IN | 20)
-#define U6_IRRX 	(GPIO_IN | 21)
-#define U7_HCTS 	(GPIO_IN | 22)
-#define U7_RX		(GPIO_IN | 23)
-/* MISC IN */
-#define SPI1_DATIN	(GPIO_IN | 25)
-#define DISP_SYNC	(GPIO_IN | 26)
-#define SPI2_DATIN	(GPIO_IN | 27)
-#define GPI_11  	(GPIO_IN | 28)
-
-#define GPIO_IN_MASK   0x1eff83ff
-
-/* OUTPUT GPIOs */
-/* GPO */
-#define GPO_00		(GPIO_OUT | 0)
-#define GPO_01   	(GPIO_OUT | 1)
-#define GPO_02   	(GPIO_OUT | 2)
-#define GPO_03 	 	(GPIO_OUT | 3)
-#define GPO_04   	(GPIO_OUT | 4)
-#define GPO_05   	(GPIO_OUT | 5)
-#define GPO_06   	(GPIO_OUT | 6)
-#define GPO_07   	(GPIO_OUT | 7)
-#define GPO_08		(GPIO_OUT | 8)
-#define GPO_09   	(GPIO_OUT | 9)
-#define GPO_10   	(GPIO_OUT | 10)
-#define GPO_11 	 	(GPIO_OUT | 11)
-#define GPO_12   	(GPIO_OUT | 12)
-#define GPO_13   	(GPIO_OUT | 13)
-#define GPO_14   	(GPIO_OUT | 14)
-#define GPO_15   	(GPIO_OUT | 15)
-#define GPO_16  	(GPIO_OUT | 16)
-#define GPO_17 	 	(GPIO_OUT | 17)
-#define GPO_18   	(GPIO_OUT | 18)
-#define GPO_19   	(GPIO_OUT | 19)
-#define GPO_20   	(GPIO_OUT | 20)
-#define GPO_21   	(GPIO_OUT | 21)
-#define GPO_22   	(GPIO_OUT | 22)
-#define GPO_23   	(GPIO_OUT | 23)
-
-#define GPIO_OUT_MASK   0xffffff
-
-/* BIDIRECTIONAL GPIOs */
-/* RAM pins */
-#define RAM_D19		(GPIO_RAM | 0)
-#define RAM_D20  	(GPIO_RAM | 1)
-#define RAM_D21  	(GPIO_RAM | 2)
-#define RAM_D22 	(GPIO_RAM | 3)
-#define RAM_D23  	(GPIO_RAM | 4)
-#define RAM_D24  	(GPIO_RAM | 5)
-#define RAM_D25  	(GPIO_RAM | 6)
-#define RAM_D26  	(GPIO_RAM | 7)
-#define RAM_D27		(GPIO_RAM | 8)
-#define RAM_D28  	(GPIO_RAM | 9)
-#define RAM_D29  	(GPIO_RAM | 10)
-#define RAM_D30 	(GPIO_RAM | 11)
-#define RAM_D31  	(GPIO_RAM | 12)
-
-#define GPIO_RAM_MASK   0x1fff
-
-/* I/O pins */
-#define GPIO_00  	(GPIO_BID | 25)
-#define GPIO_01 	(GPIO_BID | 26)
-#define GPIO_02  	(GPIO_BID | 27)
-#define GPIO_03  	(GPIO_BID | 28)
-#define GPIO_04 	(GPIO_BID | 29)
-#define GPIO_05  	(GPIO_BID | 30)
-
-#define GPIO_BID_MASK   0x7e000000
-
-/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */
-#define GPIO_SDRAM_SEL 	(GPIO_MUX | 3)
-
-#define GPIO_MUX_MASK   0x8
-
-/* Extraction/assembly macros */
-#define GPIO_BIT_MASK(K) ((K) & 0x1F)
-#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K))
-#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK))
-#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK))
-#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK))
-#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK))
-#define GPIO_ISIN(K)  ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK))
-
-/* Start Enable Pin Interrupts - table 58 page 66 */
-
-#define SE_PIN_BASE_INT   32
-
-#define SE_U7_RX_INT            63
-#define SE_U7_HCTS_INT          62
-#define SE_BT_CLKREQ_INT        61
-#define SE_U6_IRRX_INT          60
-/*59 unused*/
-#define SE_U5_RX_INT            58
-#define SE_GPI_11_INT           57
-#define SE_U3_RX_INT            56
-#define SE_U2_HCTS_INT          55
-#define SE_U2_RX_INT            54
-#define SE_U1_RX_INT            53
-#define SE_DISP_SYNC_INT        52
-/*51 unused*/
-#define SE_SDIO_INT_N           50
-#define SE_MSDIO_START_INT      49
-#define SE_GPI_06_INT           48
-#define SE_GPI_05_INT           47
-#define SE_GPI_04_INT           46
-#define SE_GPI_03_INT           45
-#define SE_GPI_02_INT           44
-#define SE_GPI_01_INT           43
-#define SE_GPI_00_INT           42
-#define SE_SYSCLKEN_PIN_INT     41
-#define SE_SPI1_DATAIN_INT      40
-#define SE_GPI_07_INT           39
-#define SE_SPI2_DATAIN_INT      38
-#define SE_GPI_10_INT           37
-#define SE_GPI_09_INT           36
-#define SE_GPI_08_INT           35
-/*34-32 unused*/
-
-/* Start Enable Internal Interrupts - table 57 page 65 */
-
-#define SE_INT_BASE_INT   0
-
-#define SE_TS_IRQ               31
-#define SE_TS_P_INT             30
-#define SE_TS_AUX_INT           29
-/*27-28 unused*/
-#define SE_USB_AHB_NEED_CLK_INT 26
-#define SE_MSTIMER_INT          25
-#define SE_RTC_INT              24
-#define SE_USB_NEED_CLK_INT     23
-#define SE_USB_INT              22
-#define SE_USB_I2C_INT          21
-#define SE_USB_OTG_TIMER_INT    20
-#define SE_USB_OTG_ATX_INT_N    19
-/*18 unused*/
-#define SE_DSP_GPIO4_INT        17
-#define SE_KEY_IRQ              16
-#define SE_DSP_SLAVEPORT_INT    15
-#define SE_DSP_GPIO1_INT        14
-#define SE_DSP_GPIO0_INT        13
-#define SE_DSP_AHB_INT          12
-/*11-6 unused*/
-#define SE_GPIO_05_INT          5
-#define SE_GPIO_04_INT          4
-#define SE_GPIO_03_INT          3
-#define SE_GPIO_02_INT          2
-#define SE_GPIO_01_INT          1
-#define SE_GPIO_00_INT          0
-
-#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
-
-#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
-
-extern int pnx4008_gpio_register_pin(unsigned short pin);
-extern int pnx4008_gpio_unregister_pin(unsigned short pin);
-extern unsigned long pnx4008_gpio_read_pin(unsigned short pin);
-extern int pnx4008_gpio_write_pin(unsigned short pin, int output);
-extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output);
-extern int pnx4008_gpio_read_pin_direction(unsigned short pin);
-extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output);
-extern int pnx4008_gpio_read_pin_mux(unsigned short pin);
-
-static inline void start_int_umask(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) |
-		     START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_mask(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) &
-		     ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_ack(u8 irq)
-{
-	__raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq));
-}
-
-static inline void start_int_set_falling_edge(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) &
-		     ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-static inline void start_int_set_rising_edge(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) |
-		     START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-#endif				/* _PNX4008_GPIO_H_ */
diff --git a/include/asm-arm/arch-pnx4008/hardware.h b/include/asm-arm/arch-pnx4008/hardware.h
deleted file mode 100644
index a441039..0000000
--- a/include/asm-arm/arch-pnx4008/hardware.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pnx4008/hardware.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <asm/arch/platform.h>
-
-/* Start of virtual addresses for IO devices */
-#define IO_BASE         0xF0000000
-
-/* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 */
-#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/io.h b/include/asm-arm/arch-pnx4008/io.h
deleted file mode 100644
index 29ee439..0000000
--- a/include/asm-arm/arch-pnx4008/io.h
+++ /dev/null
@@ -1,21 +0,0 @@
-
-/*
- *  include/asm-arm/arch-pnx4008/io.h
- *
- * Author: Dmitry Chigirev <chigirev@ru.mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/irq.h b/include/asm-arm/arch-pnx4008/irq.h
deleted file mode 100644
index fabff5d..0000000
--- a/include/asm-arm/arch-pnx4008/irq.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/irq.h
- *
- * PNX4008 IRQ controller driver - header file
- * this one is used in entry-arnv.S as well so it cannot contain C code
- *
- * Copyright (c) 2005 Philips Semiconductors
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#ifndef __PNX4008_IRQ_H__
-#define __PNX4008_IRQ_H__
-
-#define MIC_VA_BASE             IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
-#define SIC1_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-#define SIC2_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-
-/* Manual: Chapter 20, page 195 */
-
-#define INTC_BIT(irq) (1<< ((irq) & 0x1F))
-
-#define INTC_ER(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x0 + (((irq)&(0x3<<5))<<9)))
-#define INTC_RSR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x4 + (((irq)&(0x3<<5))<<9)))
-#define INTC_SR(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x8 + (((irq)&(0x3<<5))<<9)))
-#define INTC_APR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0xC + (((irq)&(0x3<<5))<<9)))
-#define INTC_ATR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x10 + (((irq)&(0x3<<5))<<9)))
-#define INTC_ITR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x14 + (((irq)&(0x3<<5))<<9)))
-
-#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
-
-#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
-
-extern void __init pnx4008_init_irq(void);
-
-#endif /* __PNX4008_IRQ_H__ */
diff --git a/include/asm-arm/arch-pnx4008/irqs.h b/include/asm-arm/arch-pnx4008/irqs.h
deleted file mode 100644
index a25d18f..0000000
--- a/include/asm-arm/arch-pnx4008/irqs.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/irqs.h
- *
- * PNX4008 IRQ controller driver - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __PNX4008_IRQS_h__
-#define __PNX4008_IRQS_h__
-
-#define NR_IRQS         96
-
-/*Manual: table 259, page 199*/
-
-/*SUB2 Interrupt Routing (SIC2)*/
-
-#define SIC2_BASE_INT   64
-
-#define CLK_SWITCH_ARM_INT 95	/*manual: Clkswitch ARM  */
-#define CLK_SWITCH_DSP_INT 94	/*manual: ClkSwitch DSP  */
-#define CLK_SWITCH_AUD_INT 93	/*manual: Clkswitch AUD  */
-#define GPI_06_INT         92
-#define GPI_05_INT         91
-#define GPI_04_INT         90
-#define GPI_03_INT         89
-#define GPI_02_INT         88
-#define GPI_01_INT         87
-#define GPI_00_INT         86
-#define BT_CLKREQ_INT      85
-#define SPI1_DATIN_INT     84
-#define U5_RX_INT          83
-#define SDIO_INT_N         82
-#define CAM_HS_INT         81
-#define CAM_VS_INT         80
-#define GPI_07_INT         79
-#define DISP_SYNC_INT      78
-#define DSP_INT8           77
-#define U7_HCTS_INT        76
-#define GPI_10_INT         75
-#define GPI_09_INT         74
-#define GPI_08_INT         73
-#define DSP_INT7           72
-#define U2_HCTS_INT        71
-#define SPI2_DATIN_INT     70
-#define GPIO_05_INT        69
-#define GPIO_04_INT        68
-#define GPIO_03_INT        67
-#define GPIO_02_INT        66
-#define GPIO_01_INT        65
-#define GPIO_00_INT        64
-
-/*Manual: table 258, page 198*/
-
-/*SUB1 Interrupt Routing (SIC1)*/
-
-#define SIC1_BASE_INT   32
-
-#define USB_I2C_INT        63
-#define USB_DEV_HP_INT     62
-#define USB_DEV_LP_INT     61
-#define USB_DEV_DMA_INT    60
-#define USB_HOST_INT       59
-#define USB_OTG_ATX_INT_N  58
-#define USB_OTG_TIMER_INT  57
-#define SW_INT             56
-#define SPI1_INT           55
-#define KEY_IRQ            54
-#define DSP_M_INT          53
-#define RTC_INT            52
-#define I2C_1_INT          51
-#define I2C_2_INT          50
-#define PLL1_LOCK_INT      49
-#define PLL2_LOCK_INT      48
-#define PLL3_LOCK_INT      47
-#define PLL4_LOCK_INT      46
-#define PLL5_LOCK_INT      45
-#define SPI2_INT           44
-#define DSP_INT1           43
-#define DSP_INT2           42
-#define DSP_TDM_INT2       41
-#define TS_AUX_INT         40
-#define TS_IRQ             39
-#define TS_P_INT           38
-#define UOUT1_TO_PAD_INT   37
-#define GPI_11_INT         36
-#define DSP_INT4           35
-#define JTAG_COMM_RX_INT   34
-#define JTAG_COMM_TX_INT   33
-#define DSP_INT3           32
-
-/*Manual: table 257, page 197*/
-
-/*MAIN Interrupt Routing*/
-
-#define MAIN_BASE_INT   0
-
-#define SUB2_FIQ_N         31	/*active low */
-#define SUB1_FIQ_N         30	/*active low */
-#define JPEG_INT           29
-#define DMA_INT            28
-#define MSTIMER_INT        27
-#define IIR1_INT           26
-#define IIR2_INT           25
-#define IIR7_INT           24
-#define DSP_TDM_INT0       23
-#define DSP_TDM_INT1       22
-#define DSP_P_INT          21
-#define DSP_INT0           20
-#define DUM_INT            19
-#define UOUT0_TO_PAD_INT   18
-#define MP4_ENC_INT        17
-#define MP4_DEC_INT        16
-#define SD0_INT            15
-#define MBX_INT            14
-#define SD1_INT            13
-#define MS_INT_N           12
-#define FLASH_INT          11 /*NAND*/
-#define IIR6_INT           10
-#define IIR5_INT           9
-#define IIR4_INT           8
-#define IIR3_INT           7
-#define WATCH_INT          6
-#define HSTIMER_INT        5
-#define ARCH_TIMER_IRQ     HSTIMER_INT
-#define CAM_INT            4
-#define PRNG_INT           3
-#define CRYPTO_INT         2
-#define SUB2_IRQ_N         1	/*active low */
-#define SUB1_IRQ_N         0	/*active low */
-
-#define PNX4008_IRQ_TYPES \
-{                                           /*IRQ #'s: */         \
-IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /*  0, 1, 2, 3 */     \
-IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  4, 5, 6, 7 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  8, 9,10,11 */     \
-IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 28,29,30,31 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */  \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 48,49,50,51 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */     \
-}
-
-/* Start Enable Pin Interrupts - table 58 page 66 */
-
-#define SE_PIN_BASE_INT   32
-
-#define SE_U7_RX_INT            63
-#define SE_U7_HCTS_INT          62
-#define SE_BT_CLKREQ_INT        61
-#define SE_U6_IRRX_INT          60
-/*59 unused*/
-#define SE_U5_RX_INT            58
-#define SE_GPI_11_INT           57
-#define SE_U3_RX_INT            56
-#define SE_U2_HCTS_INT          55
-#define SE_U2_RX_INT            54
-#define SE_U1_RX_INT            53
-#define SE_DISP_SYNC_INT        52
-/*51 unused*/
-#define SE_SDIO_INT_N           50
-#define SE_MSDIO_START_INT      49
-#define SE_GPI_06_INT           48
-#define SE_GPI_05_INT           47
-#define SE_GPI_04_INT           46
-#define SE_GPI_03_INT           45
-#define SE_GPI_02_INT           44
-#define SE_GPI_01_INT           43
-#define SE_GPI_00_INT           42
-#define SE_SYSCLKEN_PIN_INT     41
-#define SE_SPI1_DATAIN_INT      40
-#define SE_GPI_07_INT           39
-#define SE_SPI2_DATAIN_INT      38
-#define SE_GPI_10_INT           37
-#define SE_GPI_09_INT           36
-#define SE_GPI_08_INT           35
-/*34-32 unused*/
-
-/* Start Enable Internal Interrupts - table 57 page 65 */
-
-#define SE_INT_BASE_INT   0
-
-#define SE_TS_IRQ               31
-#define SE_TS_P_INT             30
-#define SE_TS_AUX_INT           29
-/*27-28 unused*/
-#define SE_USB_AHB_NEED_CLK_INT 26
-#define SE_MSTIMER_INT          25
-#define SE_RTC_INT              24
-#define SE_USB_NEED_CLK_INT     23
-#define SE_USB_INT              22
-#define SE_USB_I2C_INT          21
-#define SE_USB_OTG_TIMER_INT    20
-
-#endif /* __PNX4008_IRQS_h__ */
diff --git a/include/asm-arm/arch-pnx4008/memory.h b/include/asm-arm/arch-pnx4008/memory.h
deleted file mode 100644
index 0d8268a..0000000
--- a/include/asm-arm/arch-pnx4008/memory.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pnx4008/memory.h
- *
- * Copyright (c) 2005 Philips Semiconductors
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET     (0x80000000)
-
-#define __virt_to_bus(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
-#define __bus_to_virt(x) ((x) + PAGE_OFFSET - PHYS_OFFSET)
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/param.h b/include/asm-arm/arch-pnx4008/param.h
deleted file mode 100644
index 95d5f54..0000000
--- a/include/asm-arm/arch-pnx4008/param.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pnx4008/param.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define HZ 100
diff --git a/include/asm-arm/arch-pnx4008/platform.h b/include/asm-arm/arch-pnx4008/platform.h
deleted file mode 100644
index 2613c7c..0000000
--- a/include/asm-arm/arch-pnx4008/platform.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/platform.h
- *
- * PNX4008 Base addresses - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code received from Philips:
- * Copyright (C) 2003 Philips Semiconductors
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-
-#ifndef __ASM_ARCH_PLATFORM_H__
-#define __ASM_ARCH_PLATFORM_H__
-
-#define PNX4008_IRAM_BASE		0x08000000
-#define PNX4008_IRAM_SIZE		0x00010000
-#define PNX4008_YUV_SLAVE_BASE		0x10000000
-#define PNX4008_DUM_SLAVE_BASE		0x18000000
-#define PNX4008_NDF_FLASH_BASE		0x20020000
-#define PNX4008_SPI1_BASE		0x20088000
-#define PNX4008_SPI2_BASE		0x20090000
-#define PNX4008_SD_CONFIG_BASE		0x20098000
-#define PNX4008_FLASH_DATA		0x200B0000
-#define PNX4008_MLC_FLASH_BASE		0x200B8000
-#define PNX4008_JPEG_CONFIG_BASE	0x300A0000
-#define PNX4008_DMA_CONFIG_BASE		0x31000000
-#define PNX4008_USB_CONFIG_BASE		0x31020000
-#define PNX4008_SDRAM_CFG_BASE		0x31080000
-#define PNX4008_AHB2FAB_BASE		0x40000000
-#define PNX4008_PWRMAN_BASE		0x40004000
-#define PNX4008_INTCTRLMIC_BASE		0x40008000
-#define PNX4008_INTCTRLSIC1_BASE	0x4000C000
-#define PNX4008_INTCTRLSIC2_BASE	0x40010000
-#define PNX4008_HSUART1_BASE		0x40014000
-#define PNX4008_HSUART2_BASE		0x40018000
-#define PNX4008_HSUART7_BASE		0x4001C000
-#define PNX4008_RTC_BASE		0x40024000
-#define PNX4008_PIO_BASE		0x40028000
-#define PNX4008_MSTIMER_BASE		0x40034000
-#define PNX4008_HSTIMER_BASE		0x40038000
-#define PNX4008_WDOG_BASE		0x4003C000
-#define PNX4008_DEBUG_BASE		0x40040000
-#define PNX4008_TOUCH1_BASE		0x40048000
-#define PNX4008_KEYSCAN_BASE		0x40050000
-#define PNX4008_UARTCTRL_BASE		0x40054000
-#define PNX4008_PWM_BASE		0x4005C000
-#define PNX4008_UART3_BASE		0x40080000
-#define PNX4008_UART4_BASE		0x40088000
-#define PNX4008_UART5_BASE		0x40090000
-#define PNX4008_UART6_BASE		0x40098000
-#define PNX4008_I2C1_BASE		0x400A0000
-#define PNX4008_I2C2_BASE		0x400A8000
-#define PNX4008_MAGICGATE_BASE		0x400B0000
-#define PNX4008_DUMCONF_BASE		0x400B8000
-#define PNX4008_DUM_MAINCFG_BASE       	0x400BC000
-#define PNX4008_DSP_BASE		0x400C0000
-#define PNX4008_PROFCOUNTER_BASE	0x400C8000
-#define PNX4008_CRYPTO_BASE		0x400D0000
-#define PNX4008_CAMIFCONF_BASE		0x400D8000
-#define PNX4008_YUV2RGB_BASE		0x400E0000
-#define PNX4008_AUDIOCONFIG_BASE	0x400E8000
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/pm.h b/include/asm-arm/arch-pnx4008/pm.h
deleted file mode 100644
index bac1634c..0000000
--- a/include/asm-arm/arch-pnx4008/pm.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/pm.h
- *
- * PNX4008 Power Management Routiness - header file
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARCH_PNX4008_PM_H
-#define __ASM_ARCH_PNX4008_PM_H
-
-#ifndef __ASSEMBLER__
-#include "irq.h"
-#include "irqs.h"
-#include "clock.h"
-
-extern void pnx4008_pm_idle(void);
-extern void pnx4008_pm_suspend(void);
-extern unsigned int pnx4008_cpu_suspend_sz;
-extern void pnx4008_cpu_suspend(void);
-extern unsigned int pnx4008_cpu_standby_sz;
-extern void pnx4008_cpu_standby(void);
-
-extern int pnx4008_startup_pll(struct clk *);
-extern int pnx4008_shutdown_pll(struct clk *);
-
-#endif				/* ASSEMBLER */
-#endif				/* __ASM_ARCH_PNX4008_PM_H */
diff --git a/include/asm-arm/arch-pnx4008/system.h b/include/asm-arm/arch-pnx4008/system.h
deleted file mode 100644
index 17f9d7f9..0000000
--- a/include/asm-arm/arch-pnx4008/system.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pnx4008/system.h
- *
- * Copyright (C) 2003 Philips Semiconductors
- * Copyright (C) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-#include <asm/arch/platform.h>
-
-static void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	cpu_reset(0);
-}
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/timex.h b/include/asm-arm/arch-pnx4008/timex.h
deleted file mode 100644
index f22ee24..0000000
--- a/include/asm-arm/arch-pnx4008/timex.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/timex.h
- *
- * PNX4008 timers header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __PNX4008_TIMEX_H
-#define __PNX4008_TIMEX_H
-
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-
-#define CLOCK_TICK_RATE		1000000
-
-#define TICKS2USECS(x)	(x)
-
-/* MilliSecond Timer - Chapter 21 Page 202 */
-
-#define MSTIM_INT     IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0))
-#define MSTIM_CTRL    IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4))
-#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8))
-#define MSTIM_MCTRL   IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14))
-#define MSTIM_MATCH0  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18))
-#define MSTIM_MATCH1  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c))
-
-/* High Speed Timer - Chpater 22, Page 205 */
-
-#define HSTIM_INT     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0))
-#define HSTIM_CTRL    IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4))
-#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8))
-#define HSTIM_PMATCH  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC))
-#define HSTIM_PCOUNT  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10))
-#define HSTIM_MCTRL   IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14))
-#define HSTIM_MATCH0  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18))
-#define HSTIM_MATCH1  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c))
-#define HSTIM_MATCH2  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20))
-#define HSTIM_CCR     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28))
-#define HSTIM_CR0     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C))
-#define HSTIM_CR1     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30))
-
-/* IMPORTANT: both timers are UPCOUNTING */
-
-/* xSTIM_MCTRL bit definitions */
-#define MR0_INT        1
-#define RESET_COUNT0   (1<<1)
-#define STOP_COUNT0    (1<<2)
-#define MR1_INT        (1<<3)
-#define RESET_COUNT1   (1<<4)
-#define STOP_COUNT1    (1<<5)
-#define MR2_INT        (1<<6)
-#define RESET_COUNT2   (1<<7)
-#define STOP_COUNT2    (1<<8)
-
-/* xSTIM_CTRL bit definitions */
-#define COUNT_ENAB     1
-#define RESET_COUNT    (1<<1)
-#define DEBUG_EN       (1<<2)
-
-/* xSTIM_INT bit definitions */
-#define MATCH0_INT     1
-#define MATCH1_INT     (1<<1)
-#define MATCH2_INT     (1<<2)
-#define RTC_TICK0      (1<<4)
-#define RTC_TICK1      (1<<5)
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/uncompress.h b/include/asm-arm/arch-pnx4008/uncompress.h
deleted file mode 100644
index 8fa4d24..0000000
--- a/include/asm-arm/arch-pnx4008/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pnx4008/uncompress.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2006 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define UART5_BASE 0x40090000
-
-#define UART5_DR    (*(volatile unsigned char *) (UART5_BASE))
-#define UART5_FR    (*(volatile unsigned char *) (UART5_BASE + 18))
-
-static __inline__ void putc(char c)
-{
-	while (UART5_FR & (1 << 5))
-		barrier();
-
-	UART5_DR = c;
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-pnx4008/vmalloc.h b/include/asm-arm/arch-pnx4008/vmalloc.h
deleted file mode 100644
index 140d925..0000000
--- a/include/asm-arm/arch-pnx4008/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/vmalloc.h
- *
- * Author: Vitaly Wool <source@mvista.com>
- *
- * 2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts.  That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-pxa/debug-macro.S b/include/asm-arm/arch-pxa/debug-macro.S
deleted file mode 100644
index 9012cbc..0000000
--- a/include/asm-arm/arch-pxa/debug-macro.S
+++ /dev/null
@@ -1,25 +0,0 @@
-/* linux/include/asm-arm/arch-pxa/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include "hardware.h"
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x40000000		@ physical
-		movne	\rx, #io_p2v(0x40000000)	@ virtual
-		orr	\rx, \rx, #0x00100000
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-pxa/dma.h b/include/asm-arm/arch-pxa/dma.h
deleted file mode 100644
index dbe110e..0000000
--- a/include/asm-arm/arch-pxa/dma.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/dma.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/*
- * Descriptor structure for PXA's DMA engine
- * Note: this structure must always be aligned to a 16-byte boundary.
- */
-
-typedef struct pxa_dma_desc {
-	volatile u32 ddadr;	/* Points to the next descriptor + flags */
-	volatile u32 dsadr;	/* DSADR value for the current transfer */
-	volatile u32 dtadr;	/* DTADR value for the current transfer */
-	volatile u32 dcmd;	/* DCMD value for the current transfer */
-} pxa_dma_desc;
-
-typedef enum {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 1,
-	DMA_PRIO_LOW = 2
-} pxa_dma_prio;
-
-#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-#define HAVE_ARCH_PCI_SET_DMA_MASK	1
-#endif
-
-/*
- * DMA registration
- */
-
-int __init pxa_init_dma(int num_ch);
-
-int pxa_request_dma (char *name,
-			 pxa_dma_prio prio,
-			 void (*irq_handler)(int, void *),
-			 void *data);
-
-void pxa_free_dma (int dma_ch);
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-pxa/entry-macro.S b/include/asm-arm/arch-pxa/entry-macro.S
deleted file mode 100644
index 897d164..0000000
--- a/include/asm-arm/arch-pxa/entry-macro.S
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * include/asm-arm/arch-pxa/entry-macro.S
- *
- * Low-level IRQ helper macros for PXA-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-#include <asm/arch/irqs.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mrc	p15, 0, \tmp, c0, c0, 0		@ CPUID
-		mov	\tmp, \tmp, lsr #13
-		and	\tmp, \tmp, #0x7		@ Core G
-		cmp	\tmp, #1
-		bhi	1004f
-
-		mov	\base, #io_p2v(0x40000000)	@ IIR Ctl = 0x40d00000
-		add	\base, \base, #0x00d00000
-		ldr	\irqstat, [\base, #0]		@ ICIP
-		ldr	\irqnr, [\base, #4]		@ ICMR
-		b	1002f
-
-1004:
-		mrc	p6, 0, \irqstat, c6, c0, 0	@ ICIP2
-		mrc	p6, 0, \irqnr, c7, c0, 0	@ ICMR2
-		ands	\irqnr, \irqstat, \irqnr
-		beq	1003f
-		rsb	\irqstat, \irqnr, #0
-		and	\irqstat, \irqstat, \irqnr
-		clz	\irqnr, \irqstat
-		rsb	\irqnr, \irqnr, #31
-		add	\irqnr, \irqnr, #32
-		b	1001f
-1003:
-		mrc	p6, 0, \irqstat, c0, c0, 0	@ ICIP
-		mrc	p6, 0, \irqnr, c1, c0, 0	@ ICMR
-1002:
-		ands	\irqnr, \irqstat, \irqnr
-		beq	1001f
-		rsb	\irqstat, \irqnr, #0
-		and	\irqstat, \irqstat, \irqnr
-		clz	\irqnr, \irqstat
-		rsb	\irqnr, \irqnr, #31
-1001:
-		.endm
diff --git a/include/asm-arm/arch-pxa/gpio.h b/include/asm-arm/arch-pxa/gpio.h
deleted file mode 100644
index 2c1e3d8..0000000
--- a/include/asm-arm/arch-pxa/gpio.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/gpio.h
- *
- * PXA GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_PXA_GPIO_H
-#define __ASM_ARCH_PXA_GPIO_H
-
-#include <asm/arch/pxa-regs.h>
-#include <asm/irq.h>
-#include <asm/arch/hardware.h>
-
-#include <asm-generic/gpio.h>
-
-
-/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
- * Those cases currently cause holes in the GPIO number space.
- */
-#define NR_BUILTIN_GPIO 128
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
-		return GPLR(gpio) & GPIO_bit(gpio);
-	else
-		return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
-		if (value)
-			GPSR(gpio) = GPIO_bit(gpio);
-		else
-			GPCR(gpio) = GPIO_bit(gpio);
-	} else {
-		__gpio_set_value(gpio, value);
-	}
-}
-
-#define gpio_cansleep __gpio_cansleep
-
-#define gpio_to_irq(gpio)	IRQ_GPIO(gpio)
-#define irq_to_gpio(irq)	IRQ_TO_GPIO(irq)
-
-
-#endif
diff --git a/include/asm-arm/arch-pxa/gumstix.h b/include/asm-arm/arch-pxa/gumstix.h
deleted file mode 100644
index 6fa85c4..0000000
--- a/include/asm-arm/arch-pxa/gumstix.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/gumstix.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-/* BTRESET - Reset line to Bluetooth module, active low signal. */
-#define GPIO_GUMSTIX_BTRESET          7
-#define GPIO_GUMSTIX_BTRESET_MD		(GPIO_GUMSTIX_BTRESET | GPIO_OUT)
-
-
-/*
-GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean
-interrupt signal for determining cable presence. On the original gumstix,
-this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F,
-this moves to GPIO17 and GPIO37. */
-
-/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
-has detected a cable insertion; driven low otherwise. */
-
-#ifdef CONFIG_ARCH_GUMSTIX_ORIG
-
-#define GPIO_GUMSTIX_USB_GPIOn		81
-#define GPIO_GUMSTIX_USB_GPIOx		83
-
-#else
-
-#define GPIO_GUMSTIX_USB_GPIOn		35
-#define GPIO_GUMSTIX_USB_GPIOx		41
-
-#endif
-
-/* usb state change */
-#define GUMSTIX_USB_INTR_IRQ		IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
-
-#define GPIO_GUMSTIX_USB_GPIOn_MD	(GPIO_GUMSTIX_USB_GPIOn | GPIO_IN)
-#define GPIO_GUMSTIX_USB_GPIOx_CON_MD	(GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT)
-#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD	(GPIO_GUMSTIX_USB_GPIOx | GPIO_IN)
-
-/*
- * SD/MMC definitions
- */
-#define GUMSTIX_GPIO_nSD_WP		22 /* SD Write Protect */
-#define GUMSTIX_GPIO_nSD_DETECT		11 /* MMC/SD Card Detect */
-#define GUMSTIX_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT)
-
-/*
- * SMC Ethernet definitions
- * ETH_RST provides a hardware reset line to the ethernet chip
- * ETH is the IRQ line in from the ethernet chip to the PXA
- */
-#define GPIO_GUMSTIX_ETH0_RST		80
-#define GPIO_GUMSTIX_ETH0_RST_MD	(GPIO_GUMSTIX_ETH0_RST | GPIO_OUT)
-#define GPIO_GUMSTIX_ETH1_RST		52
-#define GPIO_GUMSTIX_ETH1_RST_MD	(GPIO_GUMSTIX_ETH1_RST | GPIO_OUT)
-
-#define GPIO_GUMSTIX_ETH0		36
-#define GPIO_GUMSTIX_ETH0_MD		(GPIO_GUMSTIX_ETH0 | GPIO_IN)
-#define GUMSTIX_ETH0_IRQ		IRQ_GPIO(GPIO_GUMSTIX_ETH0)
-#define GPIO_GUMSTIX_ETH1		27
-#define GPIO_GUMSTIX_ETH1_MD		(GPIO_GUMSTIX_ETH1 | GPIO_IN)
-#define GUMSTIX_ETH1_IRQ		IRQ_GPIO(GPIO_GUMSTIX_ETH1)
-
-
-/* CF reset line */
-#define GPIO8_RESET			8
-
-/* CF slot 0 */
-#define GPIO4_nBVD1			4
-#define GPIO4_nSTSCHG			GPIO4_nBVD1
-#define GPIO11_nCD			11
-#define GPIO26_PRDY_nBSY		26
-#define GUMSTIX_S0_nSTSCHG_IRQ		IRQ_GPIO(GPIO4_nSTSCHG)
-#define GUMSTIX_S0_nCD_IRQ		IRQ_GPIO(GPIO11_nCD)
-#define GUMSTIX_S0_PRDY_nBSY_IRQ	IRQ_GPIO(GPIO26_PRDY_nBSY)
-
-/* CF slot 1 */
-#define GPIO18_nBVD1			18
-#define GPIO18_nSTSCHG			GPIO18_nBVD1
-#define GPIO36_nCD			36
-#define GPIO27_PRDY_nBSY		27
-#define GUMSTIX_S1_nSTSCHG_IRQ		IRQ_GPIO(GPIO18_nSTSCHG)
-#define GUMSTIX_S1_nCD_IRQ		IRQ_GPIO(GPIO36_nCD)
-#define GUMSTIX_S1_PRDY_nBSY_IRQ	IRQ_GPIO(GPIO27_PRDY_nBSY)
-
-/* CF GPIO line modes */
-#define GPIO4_nSTSCHG_MD		(GPIO4_nSTSCHG | GPIO_IN)
-#define GPIO8_RESET_MD			(GPIO8_RESET | GPIO_OUT)
-#define GPIO11_nCD_MD			(GPIO11_nCD | GPIO_IN)
-#define GPIO18_nSTSCHG_MD		(GPIO18_nSTSCHG | GPIO_IN)
-#define GPIO26_PRDY_nBSY_MD		(GPIO26_PRDY_nBSY | GPIO_IN)
-#define GPIO27_PRDY_nBSY_MD		(GPIO27_PRDY_nBSY | GPIO_IN)
-#define GPIO36_nCD_MD			(GPIO36_nCD | GPIO_IN)
diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h
deleted file mode 100644
index 979a456..0000000
--- a/include/asm-arm/arch-pxa/hardware.h
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/hardware.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*
- * We requires absolute addresses.
- */
-#define PCIO_BASE		0
-
-/*
- * Workarounds for at least 2 errata so far require this.
- * The mapping is set in mach-pxa/generic.c.
- */
-#define UNCACHED_PHYS_0		0xff000000
-#define UNCACHED_ADDR		UNCACHED_PHYS_0
-
-/*
- * Intel PXA2xx internal register mapping:
- *
- * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
- * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
- * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
- * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
- * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
- * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
- * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
- *
- * Note that not all PXA2xx chips implement all those addresses, and the
- * kernel only maps the minimum needed range of this mapping.
- */
-#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
-#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
-
-#ifndef __ASSEMBLY__
-
-# define __REG(x)	(*((volatile u32 *)io_p2v(x)))
-
-/* With indexed regs we don't want to feed the index through io_p2v()
-   especially if it is a variable, otherwise horrible code will result. */
-# define __REG2(x,y)	\
-	(*(volatile u32 *)((u32)&__REG(x) + (y)))
-
-# define __PREG(x)	(io_v2p((u32)&(x)))
-
-#else
-
-# define __REG(x)	io_p2v(x)
-# define __PREG(x)	io_v2p(x)
-
-#endif
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_PXA25x
-#define __cpu_is_pxa21x(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xf3f;	\
-		_id == 0x212;				\
-	})
-
-#define __cpu_is_pxa255(id)                             \
-	({                                              \
-		unsigned int _id = (id) >> 4 & 0xfff;   \
-		_id == 0x2d0;                           \
-	 })
-
-#define __cpu_is_pxa25x(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x2d0 || _id == 0x290;		\
-	})
-#else
-#define __cpu_is_pxa21x(id)	(0)
-#define __cpu_is_pxa255(id)	(0)
-#define __cpu_is_pxa25x(id)	(0)
-#endif
-
-#ifdef CONFIG_PXA27x
-#define __cpu_is_pxa27x(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x411;				\
-	})
-#else
-#define __cpu_is_pxa27x(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA300
-#define __cpu_is_pxa300(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x688;				\
-	 })
-#else
-#define __cpu_is_pxa300(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA310
-#define __cpu_is_pxa310(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x689;				\
-	 })
-#else
-#define __cpu_is_pxa310(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA320
-#define __cpu_is_pxa320(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x603 || _id == 0x682;		\
-	 })
-#else
-#define __cpu_is_pxa320(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA930
-#define __cpu_is_pxa930(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x683;		\
-	 })
-#else
-#define __cpu_is_pxa930(id)	(0)
-#endif
-
-#define cpu_is_pxa21x()					\
-	({						\
-		__cpu_is_pxa21x(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa255()                                 \
-	({                                              \
-		__cpu_is_pxa255(read_cpuid_id());       \
-	})
-
-#define cpu_is_pxa25x()					\
-	({						\
-		__cpu_is_pxa25x(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa27x()					\
-	({						\
-		__cpu_is_pxa27x(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa300()					\
-	({						\
-		__cpu_is_pxa300(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa310()					\
-	({						\
-		__cpu_is_pxa310(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa320()					\
-	({						\
-		__cpu_is_pxa320(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa930()					\
-	({						\
-		unsigned int id = read_cpuid(CPUID_ID);	\
-		__cpu_is_pxa930(id);			\
-	 })
-
-/*
- * CPUID Core Generation Bit
- * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
- * == 0x3 for pxa300/pxa310/pxa320
- */
-#define __cpu_is_pxa2xx(id)				\
-	({						\
-		unsigned int _id = (id) >> 13 & 0x7;	\
-		_id <= 0x2;				\
-	 })
-
-#define __cpu_is_pxa3xx(id)				\
-	({						\
-		unsigned int _id = (id) >> 13 & 0x7;	\
-		_id == 0x3;				\
-	 })
-
-#define cpu_is_pxa2xx()					\
-	({						\
-		__cpu_is_pxa2xx(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa3xx()					\
-	({						\
-		__cpu_is_pxa3xx(read_cpuid_id());	\
-	 })
-
-/*
- * Handy routine to set GPIO alternate functions
- */
-extern int pxa_gpio_mode( int gpio_mode );
-
-/*
- * Return GPIO level, nonzero means high, zero is low
- */
-extern int pxa_gpio_get_value(unsigned gpio);
-
-/*
- * Set output GPIO level
- */
-extern void pxa_gpio_set_value(unsigned gpio, int value);
-
-/*
- * return current memory and LCD clock frequency in units of 10kHz
- */
-extern unsigned int get_memclk_frequency_10khz(void);
-
-/*
- * register GPIO as reset generator
- */
-extern int init_gpio_reset(int gpio);
-
-#endif
-
-#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-#define PCIBIOS_MIN_IO		0
-#define PCIBIOS_MIN_MEM		0
-#define pcibios_assign_all_busses()	1
-#endif
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-pxa/idp.h b/include/asm-arm/arch-pxa/idp.h
deleted file mode 100644
index 21aa8ac..0000000
--- a/include/asm-arm/arch-pxa/idp.h
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/idp.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
- *
- * 2001-09-13: Cliff Brake <cbrake@accelent.com>
- *             Initial code
- *
- * 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
- *             <http://www.vibren.com> <http://bec-systems.com>
- *             Changes for 2.6 kernel.
- */
-
-
-/*
- * Note: this file must be safe to include in assembly files
- *
- * Support for the Vibren PXA255 IDP requires rev04 or later
- * IDP hardware.
- */
-
-
-#define IDP_FLASH_PHYS		(PXA_CS0_PHYS)
-#define IDP_ALT_FLASH_PHYS	(PXA_CS1_PHYS)
-#define IDP_MEDIAQ_PHYS		(PXA_CS3_PHYS)
-#define IDP_IDE_PHYS		(PXA_CS5_PHYS + 0x03000000)
-#define IDP_ETH_PHYS		(PXA_CS5_PHYS + 0x03400000)
-#define IDP_COREVOLT_PHYS	(PXA_CS5_PHYS + 0x03800000)
-#define IDP_CPLD_PHYS		(PXA_CS5_PHYS + 0x03C00000)
-
-
-/*
- * virtual memory map
- */
-
-#define IDP_COREVOLT_VIRT	(0xf0000000)
-#define IDP_COREVOLT_SIZE	(1*1024*1024)
-
-#define IDP_CPLD_VIRT		(IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE)
-#define IDP_CPLD_SIZE		(1*1024*1024)
-
-#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000
-#error Your custom IO space is getting a bit large !!
-#endif
-
-#define CPLD_P2V(x)		((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT)
-#define CPLD_V2P(x)		((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __CPLD_REG(x)		(*((volatile unsigned long *)CPLD_P2V(x)))
-#else
-#  define __CPLD_REG(x)		CPLD_P2V(x)
-#endif
-
-/* board level registers in the CPLD: (offsets from CPLD_VIRT) */
-
-#define _IDP_CPLD_REV			(IDP_CPLD_PHYS + 0x00)
-#define _IDP_CPLD_PERIPH_PWR		(IDP_CPLD_PHYS + 0x04)
-#define _IDP_CPLD_LED_CONTROL		(IDP_CPLD_PHYS + 0x08)
-#define _IDP_CPLD_KB_COL_HIGH		(IDP_CPLD_PHYS + 0x0C)
-#define _IDP_CPLD_KB_COL_LOW		(IDP_CPLD_PHYS + 0x10)
-#define _IDP_CPLD_PCCARD_EN		(IDP_CPLD_PHYS + 0x14)
-#define _IDP_CPLD_GPIOH_DIR		(IDP_CPLD_PHYS + 0x18)
-#define _IDP_CPLD_GPIOH_VALUE		(IDP_CPLD_PHYS + 0x1C)
-#define _IDP_CPLD_GPIOL_DIR		(IDP_CPLD_PHYS + 0x20)
-#define _IDP_CPLD_GPIOL_VALUE		(IDP_CPLD_PHYS + 0x24)
-#define _IDP_CPLD_PCCARD_PWR		(IDP_CPLD_PHYS + 0x28)
-#define _IDP_CPLD_MISC_CTRL		(IDP_CPLD_PHYS + 0x2C)
-#define _IDP_CPLD_LCD			(IDP_CPLD_PHYS + 0x30)
-#define _IDP_CPLD_FLASH_WE		(IDP_CPLD_PHYS + 0x34)
-
-#define _IDP_CPLD_KB_ROW		(IDP_CPLD_PHYS + 0x50)
-#define _IDP_CPLD_PCCARD0_STATUS	(IDP_CPLD_PHYS + 0x54)
-#define _IDP_CPLD_PCCARD1_STATUS	(IDP_CPLD_PHYS + 0x58)
-#define _IDP_CPLD_MISC_STATUS		(IDP_CPLD_PHYS + 0x5C)
-
-/* FPGA register virtual addresses */
-
-#define IDP_CPLD_REV			__CPLD_REG(_IDP_CPLD_REV)
-#define IDP_CPLD_PERIPH_PWR		__CPLD_REG(_IDP_CPLD_PERIPH_PWR)
-#define IDP_CPLD_LED_CONTROL		__CPLD_REG(_IDP_CPLD_LED_CONTROL)
-#define IDP_CPLD_KB_COL_HIGH		__CPLD_REG(_IDP_CPLD_KB_COL_HIGH)
-#define IDP_CPLD_KB_COL_LOW		__CPLD_REG(_IDP_CPLD_KB_COL_LOW)
-#define IDP_CPLD_PCCARD_EN		__CPLD_REG(_IDP_CPLD_PCCARD_EN)
-#define IDP_CPLD_GPIOH_DIR		__CPLD_REG(_IDP_CPLD_GPIOH_DIR)
-#define IDP_CPLD_GPIOH_VALUE		__CPLD_REG(_IDP_CPLD_GPIOH_VALUE)
-#define IDP_CPLD_GPIOL_DIR		__CPLD_REG(_IDP_CPLD_GPIOL_DIR)
-#define IDP_CPLD_GPIOL_VALUE		__CPLD_REG(_IDP_CPLD_GPIOL_VALUE)
-#define IDP_CPLD_PCCARD_PWR		__CPLD_REG(_IDP_CPLD_PCCARD_PWR)
-#define IDP_CPLD_MISC_CTRL		__CPLD_REG(_IDP_CPLD_MISC_CTRL)
-#define IDP_CPLD_LCD			__CPLD_REG(_IDP_CPLD_LCD)
-#define IDP_CPLD_FLASH_WE		__CPLD_REG(_IDP_CPLD_FLASH_WE)
-
-#define IDP_CPLD_KB_ROW		        __CPLD_REG(_IDP_CPLD_KB_ROW)
-#define IDP_CPLD_PCCARD0_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS)
-#define IDP_CPLD_PCCARD1_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS)
-#define IDP_CPLD_MISC_STATUS		__CPLD_REG(_IDP_CPLD_MISC_STATUS)
-
-
-/*
- * Bit masks for various registers
- */
-
-// IDP_CPLD_PCCARD_PWR
-#define PCC0_PWR0	(1 << 0)
-#define PCC0_PWR1	(1 << 1)
-#define PCC0_PWR2	(1 << 2)
-#define PCC0_PWR3	(1 << 3)
-#define PCC1_PWR0	(1 << 4)
-#define PCC1_PWR1	(1 << 5)
-#define PCC1_PWR2	(1 << 6)
-#define PCC1_PWR3	(1 << 7)
-
-// IDP_CPLD_PCCARD_EN
-#define PCC0_RESET	(1 << 6)
-#define PCC1_RESET	(1 << 7)
-#define PCC0_ENABLE	(1 << 0)
-#define PCC1_ENABLE	(1 << 1)
-
-// IDP_CPLD_PCCARDx_STATUS
-#define _PCC_WRPROT	(1 << 7) // 7-4 read as low true
-#define _PCC_RESET	(1 << 6)
-#define _PCC_IRQ	(1 << 5)
-#define _PCC_INPACK	(1 << 4)
-#define PCC_BVD2	(1 << 3)
-#define PCC_BVD1	(1 << 2)
-#define PCC_VS2		(1 << 1)
-#define PCC_VS1		(1 << 0)
-
-#define PCC_DETECT(x)	(GPLR(7 + (x)) & GPIO_bit(7 + (x)))
-
-/* A listing of interrupts used by external hardware devices */
-
-#define TOUCH_PANEL_IRQ			IRQ_GPIO(5)
-#define IDE_IRQ				IRQ_GPIO(21)
-
-#define TOUCH_PANEL_IRQ_EDGE		IRQ_TYPE_EDGE_FALLING
-
-#define ETHERNET_IRQ			IRQ_GPIO(4)
-#define ETHERNET_IRQ_EDGE		IRQ_TYPE_EDGE_RISING
-
-#define IDE_IRQ_EDGE			IRQ_TYPE_EDGE_RISING
-
-#define PCMCIA_S0_CD_VALID		IRQ_GPIO(7)
-#define PCMCIA_S0_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
-
-#define PCMCIA_S1_CD_VALID		IRQ_GPIO(8)
-#define PCMCIA_S1_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
-
-#define PCMCIA_S0_RDYINT		IRQ_GPIO(19)
-#define PCMCIA_S1_RDYINT		IRQ_GPIO(22)
-
-
-/*
- * Macros for LED Driver
- */
-
-/* leds 0 = ON */
-#define IDP_HB_LED	(1<<5)
-#define IDP_BUSY_LED	(1<<6)
-
-#define IDP_LEDS_MASK	(IDP_HB_LED | IDP_BUSY_LED)
-
-/*
- * macros for MTD driver
- */
-
-#define FLASH_WRITE_PROTECT_DISABLE()	((IDP_CPLD_FLASH_WE) &= ~(0x1))
-#define FLASH_WRITE_PROTECT_ENABLE()	((IDP_CPLD_FLASH_WE) |= (0x1))
-
-/*
- * macros for matrix keyboard driver
- */
-
-#define KEYBD_MATRIX_NUMBER_INPUTS	7
-#define KEYBD_MATRIX_NUMBER_OUTPUTS	14
-
-#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC	FALSE
-#define KEYBD_MATRIX_INVERT_INPUT_LOGIC		FALSE
-
-#define KEYBD_MATRIX_SETTLING_TIME_US			100
-#define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT		2
-
-#define KEYBD_MATRIX_SET_OUTPUTS(outputs) \
-{\
-	IDP_CPLD_KB_COL_LOW = outputs;\
-	IDP_CPLD_KB_COL_HIGH = outputs >> 7;\
-}
-
-#define KEYBD_MATRIX_GET_INPUTS(inputs) \
-{\
-	inputs = (IDP_CPLD_KB_ROW & 0x7f);\
-}
-
-
diff --git a/include/asm-arm/arch-pxa/io.h b/include/asm-arm/arch-pxa/io.h
deleted file mode 100644
index af34e0f2..0000000
--- a/include/asm-arm/arch-pxa/io.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/io.h
- *
- * Copied from asm/arch/sa1100/io.h
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h
deleted file mode 100644
index 9413121..0000000
--- a/include/asm-arm/arch-pxa/irqs.h
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/irqs.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-#define PXA_IRQ(x)	(x)
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-#define IRQ_SSP3	PXA_IRQ(0)	/* SSP3 service request */
-#define IRQ_MSL		PXA_IRQ(1)	/* MSL Interface interrupt */
-#define IRQ_USBH2	PXA_IRQ(2)	/* USB Host interrupt 1 (OHCI) */
-#define IRQ_USBH1	PXA_IRQ(3)	/* USB Host interrupt 2 (non-OHCI) */
-#define IRQ_KEYPAD	PXA_IRQ(4)	/* Key pad controller */
-#define IRQ_MEMSTK	PXA_IRQ(5)	/* Memory Stick interrupt */
-#define IRQ_PWRI2C	PXA_IRQ(6)	/* Power I2C interrupt */
-#endif
-
-#define IRQ_HWUART	PXA_IRQ(7)	/* HWUART Transmit/Receive/Error (PXA26x) */
-#define IRQ_OST_4_11	PXA_IRQ(7)	/* OS timer 4-11 matches (PXA27x) */
-#define	IRQ_GPIO0	PXA_IRQ(8)	/* GPIO0 Edge Detect */
-#define	IRQ_GPIO1	PXA_IRQ(9)	/* GPIO1 Edge Detect */
-#define	IRQ_GPIO_2_x	PXA_IRQ(10)	/* GPIO[2-x] Edge Detect */
-#define	IRQ_USB		PXA_IRQ(11)	/* USB Service */
-#define	IRQ_PMU		PXA_IRQ(12)	/* Performance Monitoring Unit */
-#define	IRQ_I2S		PXA_IRQ(13)	/* I2S Interrupt */
-#define	IRQ_AC97	PXA_IRQ(14)	/* AC97 Interrupt */
-#define IRQ_ASSP	PXA_IRQ(15)	/* Audio SSP Service Request (PXA25x) */
-#define IRQ_USIM	PXA_IRQ(15)     /* Smart Card interface interrupt (PXA27x) */
-#define IRQ_NSSP	PXA_IRQ(16)	/* Network SSP Service Request (PXA25x) */
-#define IRQ_SSP2	PXA_IRQ(16)	/* SSP2 interrupt (PXA27x) */
-#define	IRQ_LCD		PXA_IRQ(17)	/* LCD Controller Service Request */
-#define	IRQ_I2C		PXA_IRQ(18)	/* I2C Service Request */
-#define	IRQ_ICP		PXA_IRQ(19)	/* ICP Transmit/Receive/Error */
-#define	IRQ_STUART	PXA_IRQ(20)	/* STUART Transmit/Receive/Error */
-#define	IRQ_BTUART	PXA_IRQ(21)	/* BTUART Transmit/Receive/Error */
-#define	IRQ_FFUART	PXA_IRQ(22)	/* FFUART Transmit/Receive/Error*/
-#define	IRQ_MMC		PXA_IRQ(23)	/* MMC Status/Error Detection */
-#define	IRQ_SSP		PXA_IRQ(24)	/* SSP Service Request */
-#define	IRQ_DMA 	PXA_IRQ(25)	/* DMA Channel Service Request */
-#define	IRQ_OST0 	PXA_IRQ(26)	/* OS Timer match 0 */
-#define	IRQ_OST1 	PXA_IRQ(27)	/* OS Timer match 1 */
-#define	IRQ_OST2 	PXA_IRQ(28)	/* OS Timer match 2 */
-#define	IRQ_OST3 	PXA_IRQ(29)	/* OS Timer match 3 */
-#define	IRQ_RTC1Hz	PXA_IRQ(30)	/* RTC HZ Clock Tick */
-#define	IRQ_RTCAlrm	PXA_IRQ(31)	/* RTC Alarm */
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-#define IRQ_TPM		PXA_IRQ(32)	/* TPM interrupt */
-#define IRQ_CAMERA	PXA_IRQ(33)	/* Camera Interface */
-#endif
-
-#ifdef CONFIG_PXA3xx
-#define IRQ_SSP4	PXA_IRQ(13)	/* SSP4 service request */
-#define IRQ_CIR		PXA_IRQ(34)	/* Consumer IR */
-#define IRQ_TSI		PXA_IRQ(36)	/* Touch Screen Interface (PXA320) */
-#define IRQ_USIM2	PXA_IRQ(38)	/* USIM2 Controller */
-#define IRQ_GRPHICS	PXA_IRQ(39)	/* Graphics Controller */
-#define IRQ_MMC2	PXA_IRQ(41)	/* MMC2 Controller */
-#define IRQ_1WIRE	PXA_IRQ(44)	/* 1-Wire Controller */
-#define IRQ_NAND	PXA_IRQ(45)	/* NAND Controller */
-#define IRQ_USB2	PXA_IRQ(46)	/* USB 2.0 Device Controller */
-#define IRQ_WAKEUP0	PXA_IRQ(49)	/* EXT_WAKEUP0 */
-#define IRQ_WAKEUP1	PXA_IRQ(50)	/* EXT_WAKEUP1 */
-#define IRQ_DMEMC	PXA_IRQ(51)	/* Dynamic Memory Controller */
-#define IRQ_MMC3	PXA_IRQ(55)	/* MMC3 Controller (PXA310) */
-#endif
-
-#define PXA_GPIO_IRQ_BASE	(64)
-#define PXA_GPIO_IRQ_NUM	(128)
-
-#define GPIO_2_x_TO_IRQ(x)	(PXA_GPIO_IRQ_BASE + (x))
-#define IRQ_GPIO(x)	(((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
-
-#define IRQ_TO_GPIO_2_x(i)	((i) - PXA_GPIO_IRQ_BASE)
-#define IRQ_TO_GPIO(i)	(((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
-
-/*
- * The next 16 interrupts are for board specific purposes.  Since
- * the kernel can only run on one machine at a time, we can re-use
- * these.  If you need more, increase IRQ_BOARD_END, but keep it
- * within sensible limits.
- */
-#define IRQ_BOARD_START		(PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
-#define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
-
-#define IRQ_SA1111_START	(IRQ_BOARD_END)
-#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
-#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
-#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
-#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
-#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
-#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
-#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
-#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
-#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
-#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
-#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
-#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
-#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
-#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
-#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
-#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
-#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
-#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
-#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
-#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
-#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
-#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
-#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
-#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
-#define SSPXMTINT		(IRQ_BOARD_END + 24)
-#define SSPRCVINT		(IRQ_BOARD_END + 25)
-#define SSPROR			(IRQ_BOARD_END + 26)
-#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
-#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
-#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
-#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
-#define AUDTFSR			(IRQ_BOARD_END + 36)
-#define AUDRFSR			(IRQ_BOARD_END + 37)
-#define AUDTUR			(IRQ_BOARD_END + 38)
-#define AUDROR			(IRQ_BOARD_END + 39)
-#define AUDDTS			(IRQ_BOARD_END + 40)
-#define AUDRDD			(IRQ_BOARD_END + 41)
-#define AUDSTO			(IRQ_BOARD_END + 42)
-#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
-#define IRQ_HCIM		(IRQ_BOARD_END + 44)
-#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
-#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
-#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
-#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
-#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
-#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
-#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
-#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
-#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
-#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
-
-#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
-#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
-#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
-#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
-#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
-#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
-#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
-#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
-#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
-#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
-#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
-#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
-#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
-#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
-#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
-#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
-#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
-#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
-#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
-#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
-#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_OVRN	(IRQ_BOARD_END + 20)
-#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
-
-/*
- * Figure out the MAX IRQ number.
- *
- * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
- * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
- * Otherwise, we have the standard IRQs only.
- */
-#ifdef CONFIG_SA1111
-#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SHARP_LOCOMO)
-#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
-#elif defined(CONFIG_ARCH_LUBBOCK) || \
-      defined(CONFIG_MACH_LOGICPD_PXA270) || \
-      defined(CONFIG_MACH_TOSA) || \
-      defined(CONFIG_MACH_MAINSTONE) || \
-      defined(CONFIG_MACH_PCM027) || \
-      defined(CONFIG_MACH_MAGICIAN)
-#define NR_IRQS			(IRQ_BOARD_END)
-#elif defined(CONFIG_MACH_ZYLONITE)
-#define NR_IRQS			(IRQ_BOARD_START + 32)
-#else
-#define NR_IRQS			(IRQ_BOARD_START)
-#endif
-
-/*
- * Board specific IRQs.  Define them here.
- * Do not surround them with ifdefs.
- */
-#define LUBBOCK_IRQ(x)		(IRQ_BOARD_START + (x))
-#define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
-#define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
-#define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
-#define LUBBOCK_ETH_IRQ		LUBBOCK_IRQ(3)
-#define LUBBOCK_UCB1400_IRQ	LUBBOCK_IRQ(4)
-#define LUBBOCK_BB_IRQ		LUBBOCK_IRQ(5)
-#define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
-#define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
-
-#define LPD270_IRQ(x)		(IRQ_BOARD_START + (x))
-#define LPD270_USBC_IRQ		LPD270_IRQ(2)
-#define LPD270_ETHERNET_IRQ	LPD270_IRQ(3)
-#define LPD270_AC97_IRQ		LPD270_IRQ(4)
-
-#define MAINSTONE_IRQ(x)	(IRQ_BOARD_START + (x))
-#define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
-#define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
-#define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
-#define MAINSTONE_ETHERNET_IRQ	MAINSTONE_IRQ(3)
-#define MAINSTONE_AC97_IRQ	MAINSTONE_IRQ(4)
-#define MAINSTONE_PEN_IRQ	MAINSTONE_IRQ(5)
-#define MAINSTONE_MSINS_IRQ	MAINSTONE_IRQ(6)
-#define MAINSTONE_EXBRD_IRQ	MAINSTONE_IRQ(7)
-#define MAINSTONE_S0_CD_IRQ	MAINSTONE_IRQ(9)
-#define MAINSTONE_S0_STSCHG_IRQ	MAINSTONE_IRQ(10)
-#define MAINSTONE_S0_IRQ	MAINSTONE_IRQ(11)
-#define MAINSTONE_S1_CD_IRQ	MAINSTONE_IRQ(13)
-#define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
-#define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
-
-/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
-#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
-#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
-#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
-#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
-
-/* phyCORE-PXA270 (PCM027) Interrupts */
-#define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
-#define PCM027_BTDET_IRQ       PCM027_IRQ(0)
-#define PCM027_FF_RI_IRQ       PCM027_IRQ(1)
-#define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
-#define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
-
-/* ITE8152 irqs */
-/* add IT8152 IRQs beyond BOARD_END */
-#ifdef CONFIG_PCI_HOST_ITE8152
-#define IT8152_IRQ(x)   (IRQ_BOARD_END + (x))
-
-/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
-#define IT8152_LD_IRQ_COUNT     9
-#define IT8152_LP_IRQ_COUNT     16
-#define IT8152_PD_IRQ_COUNT     15
-
-/* Priorities: */
-#define IT8152_PD_IRQ(i)        IT8152_IRQ(i)
-#define IT8152_LP_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
-#define IT8152_LD_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
-
-#define IT8152_LAST_IRQ         IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1)
-
-#if NR_IRQS < (IT8152_LAST_IRQ+1)
-#undef NR_IRQS
-#define NR_IRQS (IT8152_LAST_IRQ+1)
-#endif
-
-#endif /* CONFIG_PCI_HOST_ITE8152 */
diff --git a/include/asm-arm/arch-pxa/lpd270.h b/include/asm-arm/arch-pxa/lpd270.h
deleted file mode 100644
index 501d240..0000000
--- a/include/asm-arm/arch-pxa/lpd270.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * include/asm-arm/arch-pxa/lpd270.h
- *
- * Author:	Lennert Buytenhek
- * Created:	Feb 10, 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_LPD270_H
-#define __ASM_ARCH_LPD270_H
-
-#define LPD270_CPLD_PHYS	PXA_CS2_PHYS
-#define LPD270_CPLD_VIRT	0xf0000000
-#define LPD270_CPLD_SIZE	0x00100000
-
-#define LPD270_ETH_PHYS		(PXA_CS2_PHYS + 0x01000000)
-
-/* CPLD registers  */
-#define LPD270_CPLD_REG(x)	((unsigned long)(LPD270_CPLD_VIRT + (x)))
-#define LPD270_CONTROL		LPD270_CPLD_REG(0x00)
-#define LPD270_PERIPHERAL0	LPD270_CPLD_REG(0x04)
-#define LPD270_PERIPHERAL1	LPD270_CPLD_REG(0x08)
-#define LPD270_CPLD_REVISION	LPD270_CPLD_REG(0x14)
-#define LPD270_EEPROM_SPI_ITF	LPD270_CPLD_REG(0x20)
-#define LPD270_MODE_PINS	LPD270_CPLD_REG(0x24)
-#define LPD270_EGPIO		LPD270_CPLD_REG(0x30)
-#define LPD270_INT_MASK		LPD270_CPLD_REG(0x40)
-#define LPD270_INT_STATUS	LPD270_CPLD_REG(0x50)
-
-#define LPD270_INT_AC97		(1 << 4)  /* AC'97 CODEC IRQ */
-#define LPD270_INT_ETHERNET	(1 << 3)  /* Ethernet controller IRQ */
-#define LPD270_INT_USBC		(1 << 2)  /* USB client cable detection IRQ */
-
-
-#endif
diff --git a/include/asm-arm/arch-pxa/lubbock.h b/include/asm-arm/arch-pxa/lubbock.h
deleted file mode 100644
index 11ee735..0000000
--- a/include/asm-arm/arch-pxa/lubbock.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/lubbock.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define LUBBOCK_ETH_PHYS	PXA_CS3_PHYS
-
-#define LUBBOCK_FPGA_PHYS	PXA_CS2_PHYS
-#define LUBBOCK_FPGA_VIRT	(0xf0000000)
-#define LUB_P2V(x)		((x) - LUBBOCK_FPGA_PHYS + LUBBOCK_FPGA_VIRT)
-#define LUB_V2P(x)		((x) - LUBBOCK_FPGA_VIRT + LUBBOCK_FPGA_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __LUB_REG(x)		(*((volatile unsigned long *)LUB_P2V(x)))
-#else
-#  define __LUB_REG(x)		LUB_P2V(x)
-#endif
-
-/* FPGA register virtual addresses */
-#define LUB_WHOAMI		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x000)
-#define LUB_HEXLED		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
-#define LUB_DISC_BLNK_LED	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x040)
-#define LUB_CONF_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x050)
-#define LUB_USER_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x060)
-#define LUB_MISC_WR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
-#define LUB_MISC_RD		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x090)
-#define LUB_IRQ_MASK_EN		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0c0)
-#define LUB_IRQ_SET_CLR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
-#define LUB_GP			__LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
-
-#ifndef __ASSEMBLY__
-extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
-#endif
diff --git a/include/asm-arm/arch-pxa/magician.h b/include/asm-arm/arch-pxa/magician.h
deleted file mode 100644
index 169b374..0000000
--- a/include/asm-arm/arch-pxa/magician.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * GPIO and IRQ definitions for HTC Magician PDA phones
- *
- * Copyright (c) 2007 Philipp Zabel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _MAGICIAN_H_
-#define _MAGICIAN_H_
-
-#include <asm/arch/irqs.h>
-
-/*
- * PXA GPIOs
- */
-
-#define GPIO0_MAGICIAN_KEY_POWER		0
-#define GPIO9_MAGICIAN_UNKNOWN			9
-#define GPIO10_MAGICIAN_GSM_IRQ			10
-#define GPIO11_MAGICIAN_GSM_OUT1		11
-#define GPIO13_MAGICIAN_CPLD_IRQ		13
-#define GPIO18_MAGICIAN_UNKNOWN			18
-#define GPIO22_MAGICIAN_VIBRA_EN		22
-#define GPIO26_MAGICIAN_GSM_POWER		26
-#define GPIO27_MAGICIAN_USBC_PUEN		27
-#define GPIO30_MAGICIAN_nCHARGE_EN		30
-#define GPIO37_MAGICIAN_KEY_HANGUP		37
-#define GPIO38_MAGICIAN_KEY_CONTACTS		38
-#define GPIO40_MAGICIAN_GSM_OUT2		40
-#define GPIO48_MAGICIAN_UNKNOWN			48
-#define GPIO56_MAGICIAN_UNKNOWN			56
-#define GPIO57_MAGICIAN_CAM_RESET		57
-#define GPIO75_MAGICIAN_SAMSUNG_POWER		75
-#define GPIO83_MAGICIAN_nIR_EN			83
-#define GPIO86_MAGICIAN_GSM_RESET		86
-#define GPIO87_MAGICIAN_GSM_SELECT		87
-#define GPIO90_MAGICIAN_KEY_CALENDAR		90
-#define GPIO91_MAGICIAN_KEY_CAMERA		91
-#define GPIO93_MAGICIAN_KEY_UP			93
-#define GPIO94_MAGICIAN_KEY_DOWN		94
-#define GPIO95_MAGICIAN_KEY_LEFT		95
-#define GPIO96_MAGICIAN_KEY_RIGHT		96
-#define GPIO97_MAGICIAN_KEY_ENTER		97
-#define GPIO98_MAGICIAN_KEY_RECORD		98
-#define GPIO99_MAGICIAN_HEADPHONE_IN		99
-#define GPIO100_MAGICIAN_KEY_VOL_UP		100
-#define GPIO101_MAGICIAN_KEY_VOL_DOWN 		101
-#define GPIO102_MAGICIAN_KEY_PHONE		102
-#define GPIO103_MAGICIAN_LED_KP			103
-#define GPIO104_MAGICIAN_LCD_POWER_1 		104
-#define GPIO105_MAGICIAN_LCD_POWER_2		105
-#define GPIO106_MAGICIAN_LCD_POWER_3		106
-#define GPIO107_MAGICIAN_DS1WM_IRQ		107
-#define GPIO108_MAGICIAN_GSM_READY		108
-#define GPIO114_MAGICIAN_UNKNOWN		114
-#define GPIO115_MAGICIAN_nPEN_IRQ		115
-#define GPIO116_MAGICIAN_nCAM_EN		116
-#define GPIO119_MAGICIAN_UNKNOWN		119
-#define GPIO120_MAGICIAN_UNKNOWN		120
-
-/*
- * CPLD IRQs
- */
-
-#define IRQ_MAGICIAN_SD		(IRQ_BOARD_START + 0)
-#define IRQ_MAGICIAN_EP		(IRQ_BOARD_START + 1)
-#define IRQ_MAGICIAN_BT		(IRQ_BOARD_START + 2)
-#define IRQ_MAGICIAN_AC		(IRQ_BOARD_START + 3)
-
-/*
- * CPLD EGPIOs
- */
-
-#define MAGICIAN_EGPIO_BASE			0x80 /* GPIO_BOARD_START */
-#define MAGICIAN_EGPIO(reg,bit) \
-	(MAGICIAN_EGPIO_BASE + 8*reg + bit)
-
-/* output */
-
-#define EGPIO_MAGICIAN_TOPPOLY_POWER		MAGICIAN_EGPIO(0, 2)
-#define EGPIO_MAGICIAN_LED_POWER		MAGICIAN_EGPIO(0, 5)
-#define EGPIO_MAGICIAN_GSM_RESET		MAGICIAN_EGPIO(0, 6)
-#define EGPIO_MAGICIAN_LCD_POWER		MAGICIAN_EGPIO(0, 7)
-#define EGPIO_MAGICIAN_SPK_POWER		MAGICIAN_EGPIO(1, 0)
-#define EGPIO_MAGICIAN_EP_POWER			MAGICIAN_EGPIO(1, 1)
-#define EGPIO_MAGICIAN_IN_SEL0			MAGICIAN_EGPIO(1, 2)
-#define EGPIO_MAGICIAN_IN_SEL1			MAGICIAN_EGPIO(1, 3)
-#define EGPIO_MAGICIAN_MIC_POWER		MAGICIAN_EGPIO(1, 4)
-#define EGPIO_MAGICIAN_CODEC_RESET		MAGICIAN_EGPIO(1, 5)
-#define EGPIO_MAGICIAN_CODEC_POWER		MAGICIAN_EGPIO(1, 6)
-#define EGPIO_MAGICIAN_BL_POWER			MAGICIAN_EGPIO(1, 7)
-#define EGPIO_MAGICIAN_SD_POWER			MAGICIAN_EGPIO(2, 0)
-#define EGPIO_MAGICIAN_CARKIT_MIC		MAGICIAN_EGPIO(2, 1)
-#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL	MAGICIAN_EGPIO(2, 2)
-#define EGPIO_MAGICIAN_FLASH_VPP		MAGICIAN_EGPIO(2, 3)
-#define EGPIO_MAGICIAN_BL_POWER2		MAGICIAN_EGPIO(2, 4)
-#define EGPIO_MAGICIAN_CHARGE_EN		MAGICIAN_EGPIO(2, 5)
-#define EGPIO_MAGICIAN_GSM_POWER		MAGICIAN_EGPIO(2, 7)
-
-/* input */
-
-#define EGPIO_MAGICIAN_CABLE_STATE_AC		MAGICIAN_EGPIO(4, 0)
-#define EGPIO_MAGICIAN_CABLE_STATE_USB		MAGICIAN_EGPIO(4, 1)
-
-#define EGPIO_MAGICIAN_BOARD_ID0		MAGICIAN_EGPIO(5, 0)
-#define EGPIO_MAGICIAN_BOARD_ID1		MAGICIAN_EGPIO(5, 1)
-#define EGPIO_MAGICIAN_BOARD_ID2		MAGICIAN_EGPIO(5, 2)
-#define EGPIO_MAGICIAN_LCD_SELECT		MAGICIAN_EGPIO(5, 3)
-#define EGPIO_MAGICIAN_nSD_READONLY		MAGICIAN_EGPIO(5, 4)
-
-#define EGPIO_MAGICIAN_EP_INSERT		MAGICIAN_EGPIO(6, 1)
-
-#endif /* _MAGICIAN_H_ */
diff --git a/include/asm-arm/arch-pxa/mainstone.h b/include/asm-arm/arch-pxa/mainstone.h
deleted file mode 100644
index 14c862a..0000000
--- a/include/asm-arm/arch-pxa/mainstone.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/mainstone.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Nov 14, 2002
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ASM_ARCH_MAINSTONE_H
-#define ASM_ARCH_MAINSTONE_H
-
-#define MST_ETH_PHYS		PXA_CS4_PHYS
-
-#define MST_FPGA_PHYS		PXA_CS2_PHYS
-#define MST_FPGA_VIRT		(0xf0000000)
-#define MST_P2V(x)		((x) - MST_FPGA_PHYS + MST_FPGA_VIRT)
-#define MST_V2P(x)		((x) - MST_FPGA_VIRT + MST_FPGA_PHYS)
-
-#ifndef __ASSEMBLY__
-# define __MST_REG(x)		(*((volatile unsigned long *)MST_P2V(x)))
-#else
-# define __MST_REG(x)		MST_P2V(x)
-#endif
-
-/* board level registers in the FPGA */
-
-#define MST_LEDDAT1		__MST_REG(0x08000010)
-#define MST_LEDDAT2		__MST_REG(0x08000014)
-#define MST_LEDCTRL		__MST_REG(0x08000040)
-#define MST_GPSWR		__MST_REG(0x08000060)
-#define MST_MSCWR1		__MST_REG(0x08000080)
-#define MST_MSCWR2		__MST_REG(0x08000084)
-#define MST_MSCWR3		__MST_REG(0x08000088)
-#define MST_MSCRD		__MST_REG(0x08000090)
-#define MST_INTMSKENA		__MST_REG(0x080000c0)
-#define MST_INTSETCLR		__MST_REG(0x080000d0)
-#define MST_PCMCIA0		__MST_REG(0x080000e0)
-#define MST_PCMCIA1		__MST_REG(0x080000e4)
-
-#define MST_MSCWR1_CAMERA_ON	(1 << 15)  /* Camera interface power control */
-#define MST_MSCWR1_CAMERA_SEL	(1 << 14)  /* Camera interface mux control */
-#define MST_MSCWR1_LCD_CTL	(1 << 13)  /* General-purpose LCD control */
-#define MST_MSCWR1_MS_ON	(1 << 12)  /* Memory Stick power control */
-#define MST_MSCWR1_MMC_ON	(1 << 11)  /* MultiMediaCard* power control */
-#define MST_MSCWR1_MS_SEL	(1 << 10)  /* SD/MS multiplexer control */
-#define MST_MSCWR1_BB_SEL	(1 << 9)   /* PCMCIA/Baseband multiplexer */
-#define MST_MSCWR1_BT_ON	(1 << 8)   /* Bluetooth UART transceiver */
-#define MST_MSCWR1_BTDTR	(1 << 7)   /* Bluetooth UART DTR */
-
-#define MST_MSCWR1_IRDA_MASK	(3 << 5)   /* IrDA transceiver mode */
-#define MST_MSCWR1_IRDA_FULL	(0 << 5)   /* full distance power */
-#define MST_MSCWR1_IRDA_OFF	(1 << 5)   /* shutdown */
-#define MST_MSCWR1_IRDA_MED	(2 << 5)   /* 2/3 distance power */
-#define MST_MSCWR1_IRDA_LOW	(3 << 5)   /* 1/3 distance power */
-
-#define MST_MSCWR1_IRDA_FIR	(1 << 4)   /* IrDA transceiver SIR/FIR */
-#define MST_MSCWR1_GREENLED	(1 << 3)   /* LED D1 control */
-#define MST_MSCWR1_PDC_CTL	(1 << 2)   /* reserved */
-#define MST_MSCWR1_MTR_ON	(1 << 1)   /* Silent alert motor */
-#define MST_MSCWR1_SYSRESET	(1 << 0)   /* System reset */
-
-#define MST_MSCWR2_USB_OTG_RST	(1 << 6)   /* USB On The Go reset */
-#define MST_MSCWR2_USB_OTG_SEL	(1 << 5)   /* USB On The Go control */
-#define MST_MSCWR2_nUSBC_SC	(1 << 4)   /* USB client soft connect control */
-#define MST_MSCWR2_I2S_SPKROFF	(1 << 3)   /* I2S CODEC amplifier control */
-#define MST_MSCWR2_AC97_SPKROFF	(1 << 2)   /* AC97 CODEC amplifier control */
-#define MST_MSCWR2_RADIO_PWR	(1 << 1)   /* Radio module power control */
-#define MST_MSCWR2_RADIO_WAKE	(1 << 0)   /* Radio module wake-up signal */
-
-#define MST_MSCWR3_GPIO_RESET_EN	(1 << 2) /* Enable GPIO Reset */
-#define MST_MSCWR3_GPIO_RESET		(1 << 1) /* Initiate a GPIO Reset */
-#define MST_MSCWR3_COMMS_SW_RESET	(1 << 0) /* Communications Processor Reset Control */
-
-#define MST_MSCRD_nPENIRQ	(1 << 9)   /* ADI7873* nPENIRQ signal */
-#define MST_MSCRD_nMEMSTK_CD	(1 << 8)   /* Memory Stick detection signal */
-#define MST_MSCRD_nMMC_CD	(1 << 7)   /* SD/MMC card detection signal */
-#define MST_MSCRD_nUSIM_CD	(1 << 6)   /* USIM card detection signal */
-#define MST_MSCRD_USB_CBL	(1 << 5)   /* USB client cable status */
-#define MST_MSCRD_TS_BUSY	(1 << 4)   /* ADI7873 busy */
-#define MST_MSCRD_BTDSR		(1 << 3)   /* Bluetooth UART DSR */
-#define MST_MSCRD_BTRI		(1 << 2)   /* Bluetooth UART Ring Indicator */
-#define MST_MSCRD_BTDCD		(1 << 1)   /* Bluetooth UART DCD */
-#define MST_MSCRD_nMMC_WP	(1 << 0)   /* SD/MMC write-protect status */
-
-#define MST_INT_S1_IRQ		(1 << 15)  /* PCMCIA socket 1 IRQ */
-#define MST_INT_S1_STSCHG	(1 << 14)  /* PCMCIA socket 1 status changed */
-#define MST_INT_S1_CD		(1 << 13)  /* PCMCIA socket 1 card detection */
-#define MST_INT_S0_IRQ		(1 << 11)  /* PCMCIA socket 0 IRQ */
-#define MST_INT_S0_STSCHG	(1 << 10)  /* PCMCIA socket 0 status changed */
-#define MST_INT_S0_CD		(1 << 9)   /* PCMCIA socket 0 card detection */
-#define MST_INT_nEXBRD_INT	(1 << 7)   /* Expansion board IRQ */
-#define MST_INT_MSINS		(1 << 6)   /* Memory Stick* detection */
-#define MST_INT_PENIRQ		(1 << 5)   /* ADI7873* touch-screen IRQ */
-#define MST_INT_AC97		(1 << 4)   /* AC'97 CODEC IRQ */
-#define MST_INT_ETHERNET	(1 << 3)   /* Ethernet controller IRQ */
-#define MST_INT_USBC		(1 << 2)   /* USB client cable detection IRQ */
-#define MST_INT_USIM		(1 << 1)   /* USIM card detection IRQ */
-#define MST_INT_MMC		(1 << 0)   /* MMC/SD card detection IRQ */
-
-#define MST_PCMCIA_nIRQ		(1 << 10)  /* IRQ / ready signal */
-#define MST_PCMCIA_nSPKR_BVD2	(1 << 9)   /* VDD sense / digital speaker */
-#define MST_PCMCIA_nSTSCHG_BVD1	(1 << 8)   /* VDD sense / card status changed */
-#define MST_PCMCIA_nVS2		(1 << 7)   /* VSS voltage sense */
-#define MST_PCMCIA_nVS1		(1 << 6)   /* VSS voltage sense */
-#define MST_PCMCIA_nCD		(1 << 5)   /* Card detection signal */
-#define MST_PCMCIA_RESET	(1 << 4)   /* Card reset signal */
-#define MST_PCMCIA_PWR_MASK	(0x000f)   /* MAX1602 power-supply controls */
-
-#define MST_PCMCIA_PWR_VPP_0    0x0	   /* voltage VPP = 0V */
-#define MST_PCMCIA_PWR_VPP_120  0x2 	   /* voltage VPP = 12V*/
-#define MST_PCMCIA_PWR_VPP_VCC  0x1	   /* voltage VPP = VCC */
-#define MST_PCMCIA_PWR_VCC_0    0x0	   /* voltage VCC = 0V */
-#define MST_PCMCIA_PWR_VCC_33   0x8	   /* voltage VCC = 3.3V */
-#define MST_PCMCIA_PWR_VCC_50   0x4	   /* voltage VCC = 5.0V */
-
-#endif
diff --git a/include/asm-arm/arch-pxa/memory.h b/include/asm-arm/arch-pxa/memory.h
deleted file mode 100644
index bee81d6..0000000
--- a/include/asm-arm/arch-pxa/memory.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/memory.h
- *
- * Author:	Nicolas Pitre
- * Copyright:	(C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0xa0000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	 __virt_to_phys(x)
-#define __bus_to_virt(x)	 __phys_to_virt(x)
-
-/*
- * The nodes are matched with the physical SDRAM banks as follows:
- *
- * 	node 0:  0xa0000000-0xa3ffffff	-->  0xc0000000-0xc3ffffff
- * 	node 1:  0xa4000000-0xa7ffffff	-->  0xc4000000-0xc7ffffff
- * 	node 2:  0xa8000000-0xabffffff	-->  0xc8000000-0xcbffffff
- * 	node 3:  0xac000000-0xafffffff	-->  0xcc000000-0xcfffffff
- *
- * This needs a node mem size of 26 bits.
- */
-#define NODE_MEM_SIZE_BITS	26
-
-#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-void cmx270_pci_adjust_zones(int node, unsigned long *size,
-			     unsigned long *holes);
-
-#define arch_adjust_zones(node, size, holes) \
-	cmx270_pci_adjust_zones(node, size, holes)
-
-#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_64M - 1)
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-pxa/mfp-pxa25x.h b/include/asm-arm/arch-pxa/mfp-pxa25x.h
deleted file mode 100644
index 0499323..0000000
--- a/include/asm-arm/arch-pxa/mfp-pxa25x.h
+++ /dev/null
@@ -1,161 +0,0 @@
-#ifndef __ASM_ARCH_MFP_PXA25X_H
-#define __ASM_ARCH_MFP_PXA25X_H
-
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa2xx.h>
-
-/* GPIO */
-#define GPIO2_GPIO		MFP_CFG_IN(GPIO2, AF0)
-#define GPIO3_GPIO		MFP_CFG_IN(GPIO3, AF0)
-#define GPIO4_GPIO		MFP_CFG_IN(GPIO4, AF0)
-#define GPIO5_GPIO		MFP_CFG_IN(GPIO5, AF0)
-#define GPIO6_GPIO		MFP_CFG_IN(GPIO6, AF0)
-#define GPIO7_GPIO		MFP_CFG_IN(GPIO7, AF0)
-#define GPIO8_GPIO		MFP_CFG_IN(GPIO8, AF0)
-
-#define GPIO1_RST		MFP_CFG_IN(GPIO1, AF1)
-
-/* Crystal and Clock Signals */
-#define GPIO10_RTCCLK		MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
-#define GPIO70_RTC_CLK		MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW)
-#define GPIO7_48MHz		MFP_CFG_OUT(GPIO7,  AF1, DRIVE_LOW)
-#define GPIO11_3_6MHz		MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
-#define GPIO71_3_6MHz		MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW)
-#define GPIO12_32KHz		MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
-#define GPIO72_32kHz		MFP_CFG_OUT(GPIO72, AF1, DRIVE_LOW)
-
-/* SDRAM and Static Memory I/O Signals */
-#define GPIO15_nCS_1		MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
-#define GPIO78_nCS_2		MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
-#define GPIO79_nCS_3		MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
-#define GPIO80_nCS_4		MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
-#define GPIO33_nCS_5		MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
-
-/* Miscellaneous I/O and DMA Signals */
-#define GPIO18_RDY		MFP_CFG_IN(GPIO18, AF1)
-#define GPIO20_DREQ_0		MFP_CFG_IN(GPIO20, AF1)
-#define GPIO19_DREQ_1		MFP_CFG_IN(GPIO19, AF1)
-
-/* Alternate Bus Master Mode I/O Signals */
-#define GPIO13_MBGNT		MFP_CFG_OUT(GPIO13, AF2, DRIVE_LOW)
-#define GPIO73_MBGNT		MFP_CFG_OUT(GPIO73, AF1, DRIVE_LOW)
-#define GPIO14_MBREQ		MFP_CFG_IN(GPIO14, AF1)
-#define GPIO66_MBREQ		MFP_CFG_IN(GPIO66, AF1)
-
-/* PC CARD */
-#define GPIO52_nPCE_1		MFP_CFG_OUT(GPIO52, AF2, DRIVE_HIGH)
-#define GPIO53_nPCE_2		MFP_CFG_OUT(GPIO53, AF2, DRIVE_HIGH)
-#define GPIO55_nPREG		MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
-#define GPIO50_nPIOR		MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
-#define GPIO51_nPIOW		MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
-#define GPIO49_nPWE		MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
-#define GPIO48_nPOE		MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
-#define GPIO57_nIOIS16		MFP_CFG_IN(GPIO57, AF1)
-#define GPIO56_nPWAIT		MFP_CFG_IN(GPIO56, AF1)
-#define GPIO54_nPSKTSEL		MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
-
-/* FFUART */
-#define GPIO34_FFUART_RXD	MFP_CFG_IN(GPIO34, AF1)
-#define GPIO35_FFUART_CTS	MFP_CFG_IN(GPIO35, AF1)
-#define GPIO36_FFUART_DCD	MFP_CFG_IN(GPIO36, AF1)
-#define GPIO37_FFUART_DSR	MFP_CFG_IN(GPIO37, AF1)
-#define GPIO38_FFUART_RI	MFP_CFG_IN(GPIO38, AF1)
-#define GPIO39_FFUART_TXD	MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
-#define GPIO40_FFUART_DTR	MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
-#define GPIO41_FFUART_RTS	MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
-
-/* BTUART */
-#define GPIO42_BTUART_RXD	MFP_CFG_IN(GPIO42, AF1)
-#define GPIO43_BTUART_TXD	MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
-#define GPIO44_BTUART_CTS	MFP_CFG_IN(GPIO44, AF1)
-#define GPIO45_BTUART_RTS	MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
-
-/* STUART */
-#define GPIO46_STUART_RXD	MFP_CFG_IN(GPIO46, AF2)
-#define GPIO47_STUART_TXD	MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
-
-/* HWUART */
-#define GPIO42_HWUART_RXD	MFP_CFG_IN(GPIO42, AF3)
-#define GPIO43_HWUART_TXD	MFP_CFG_OUT(GPIO43, AF3, DRIVE_HIGH)
-#define GPIO44_HWUART_CTS	MFP_CFG_IN(GPIO44, AF3)
-#define GPIO45_HWUART_RTS	MFP_CFG_OUT(GPIO45, AF3, DRIVE_HIGH)
-#define GPIO48_HWUART_TXD	MFP_CFG_OUT(GPIO48, AF1, DRIVE_HIGH)
-#define GPIO49_HWUART_RXD	MFP_CFG_IN(GPIO49, AF1)
-#define GPIO50_HWUART_CTS	MFP_CFG_IN(GPIO50, AF1)
-#define GPIO51_HWUART_RTS	MFP_CFG_OUT(GPIO51, AF1, DRIVE_HIGH)
-
-/* FICP */
-#define GPIO46_FICP_RXD		MFP_CFG_IN(GPIO46, AF1)
-#define GPIO47_FICP_TXD		MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
-
-/* PWM 0/1 */
-#define GPIO16_PWM0_OUT		MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
-#define GPIO17_PWM1_OUT		MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
-
-/* AC97 */
-#define GPIO28_AC97_BITCLK	MFP_CFG_IN(GPIO28, AF1)
-#define GPIO29_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO29, AF1)
-#define GPIO30_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
-#define GPIO31_AC97_SYNC	MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
-#define GPIO32_AC97_SDATA_IN_1	MFP_CFG_IN(GPIO32, AF1)
-
-/* I2S */
-#define GPIO28_I2S_BITCLK_IN	MFP_CFG_IN(GPIO28, AF2)
-#define GPIO28_I2S_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
-#define GPIO29_I2S_SDATA_IN	MFP_CFG_IN(GPIO29, AF2)
-#define GPIO30_I2S_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
-#define GPIO31_I2S_SYNC		MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
-#define GPIO32_I2S_SYSCLK	MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
-
-/* SSP 1 */
-#define GPIO23_SSP1_SCLK	MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
-#define GPIO24_SSP1_SFRM	MFP_CFG_OUT(GPIO24, AF2, DRIVE_LOW)
-#define GPIO25_SSP1_TXD		MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
-#define GPIO26_SSP1_RXD		MFP_CFG_IN(GPIO26, AF1)
-#define GPIO27_SSP1_EXTCLK	MFP_CFG_IN(GPIO27, AF1)
-
-/* SSP 2 - NSSP */
-#define GPIO81_SSP2_CLK_OUT 	MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
-#define GPIO81_SSP2_CLK_IN  	MFP_CFG_IN(GPIO81, AF1)
-#define GPIO82_SSP2_FRM_OUT 	MFP_CFG_OUT(GPIO82, AF1, DRIVE_LOW)
-#define GPIO82_SSP2_FRM_IN  	MFP_CFG_IN(GPIO82, AF1)
-#define GPIO83_SSP2_TXD      	MFP_CFG_OUT(GPIO83, AF1, DRIVE_LOW)
-#define GPIO83_SSP2_RXD      	MFP_CFG_IN(GPIO83, AF2)
-#define GPIO84_SSP2_TXD      	MFP_CFG_OUT(GPIO84, AF1, DRIVE_LOW)
-#define GPIO84_SSP2_RXD      	MFP_CFG_IN(GPIO84, AF2)
-
-/* MMC */
-#define GPIO6_MMC_CLK		MFP_CFG_OUT(GPIO6, AF1, DRIVE_LOW)
-#define GPIO8_MMC_CS0		MFP_CFG_OUT(GPIO8, AF1, DRIVE_LOW)
-#define GPIO9_MMC_CS1		MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW)
-#define GPIO34_MMC_CS0		MFP_CFG_OUT(GPIO34, AF2, DRIVE_LOW)
-#define GPIO39_MMC_CS1		MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
-#define GPIO53_MMC_CLK		MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
-#define GPIO54_MMC_CLK		MFP_CFG_OUT(GPIO54, AF1, DRIVE_LOW)
-#define GPIO69_MMC_CLK		MFP_CFG_OUT(GPIO69, AF1, DRIVE_LOW)
-#define GPIO67_MMC_CS0		MFP_CFG_OUT(GPIO67, AF1, DRIVE_LOW)
-#define GPIO68_MMC_CS1		MFP_CFG_OUT(GPIO68, AF1, DRIVE_LOW)
-
-/* LCD */
-#define GPIO58_LCD_LDD_0	MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
-#define GPIO59_LCD_LDD_1	MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
-#define GPIO60_LCD_LDD_2	MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
-#define GPIO61_LCD_LDD_3	MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
-#define GPIO62_LCD_LDD_4	MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
-#define GPIO63_LCD_LDD_5	MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
-#define GPIO64_LCD_LDD_6	MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
-#define GPIO65_LCD_LDD_7	MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
-#define GPIO66_LCD_LDD_8	MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
-#define GPIO67_LCD_LDD_9	MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
-#define GPIO68_LCD_LDD_10	MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
-#define GPIO69_LCD_LDD_11	MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
-#define GPIO70_LCD_LDD_12	MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
-#define GPIO71_LCD_LDD_13	MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
-#define GPIO72_LCD_LDD_14	MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
-#define GPIO73_LCD_LDD_15	MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
-#define GPIO74_LCD_FCLK		MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
-#define GPIO75_LCD_LCLK		MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
-#define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
-#define GPIO77_LCD_ACBIAS	MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
-
-#endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/include/asm-arm/arch-pxa/mfp-pxa27x.h b/include/asm-arm/arch-pxa/mfp-pxa27x.h
deleted file mode 100644
index bc73ab8..0000000
--- a/include/asm-arm/arch-pxa/mfp-pxa27x.h
+++ /dev/null
@@ -1,433 +0,0 @@
-#ifndef __ASM_ARCH_MFP_PXA27X_H
-#define __ASM_ARCH_MFP_PXA27X_H
-
-/*
- * NOTE:  for those special-function bidirectional GPIOs, as described
- * in the "PXA27x Developer's Manual" Section 24.4.2.1, only its input
- * alternative is preserved, the direction is actually selected by the
- * specific controller, and this should work in most cases.
- */
-
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa2xx.h>
-
-/* GPIO */
-#define GPIO85_GPIO		MFP_CFG_IN(GPIO85, AF0)
-#define GPIO86_GPIO		MFP_CFG_IN(GPIO86, AF0)
-#define GPIO87_GPIO		MFP_CFG_IN(GPIO87, AF0)
-#define GPIO88_GPIO		MFP_CFG_IN(GPIO88, AF0)
-#define GPIO89_GPIO		MFP_CFG_IN(GPIO89, AF0)
-#define GPIO90_GPIO		MFP_CFG_IN(GPIO90, AF0)
-#define GPIO91_GPIO		MFP_CFG_IN(GPIO91, AF0)
-#define GPIO92_GPIO		MFP_CFG_IN(GPIO92, AF0)
-#define GPIO93_GPIO		MFP_CFG_IN(GPIO93, AF0)
-#define GPIO94_GPIO		MFP_CFG_IN(GPIO94, AF0)
-#define GPIO95_GPIO		MFP_CFG_IN(GPIO95, AF0)
-#define GPIO96_GPIO		MFP_CFG_IN(GPIO96, AF0)
-#define GPIO97_GPIO		MFP_CFG_IN(GPIO97, AF0)
-#define GPIO98_GPIO		MFP_CFG_IN(GPIO98, AF0)
-#define GPIO99_GPIO		MFP_CFG_IN(GPIO99, AF0)
-#define GPIO100_GPIO		MFP_CFG_IN(GPIO100, AF0)
-#define GPIO101_GPIO		MFP_CFG_IN(GPIO101, AF0)
-#define GPIO102_GPIO		MFP_CFG_IN(GPIO102, AF0)
-#define GPIO103_GPIO		MFP_CFG_IN(GPIO103, AF0)
-#define GPIO104_GPIO		MFP_CFG_IN(GPIO104, AF0)
-#define GPIO105_GPIO		MFP_CFG_IN(GPIO105, AF0)
-#define GPIO106_GPIO		MFP_CFG_IN(GPIO106, AF0)
-#define GPIO107_GPIO		MFP_CFG_IN(GPIO107, AF0)
-#define GPIO108_GPIO		MFP_CFG_IN(GPIO108, AF0)
-#define GPIO109_GPIO		MFP_CFG_IN(GPIO109, AF0)
-#define GPIO110_GPIO		MFP_CFG_IN(GPIO110, AF0)
-#define GPIO111_GPIO		MFP_CFG_IN(GPIO111, AF0)
-#define GPIO112_GPIO		MFP_CFG_IN(GPIO112, AF0)
-#define GPIO113_GPIO		MFP_CFG_IN(GPIO113, AF0)
-#define GPIO114_GPIO		MFP_CFG_IN(GPIO114, AF0)
-#define GPIO115_GPIO		MFP_CFG_IN(GPIO115, AF0)
-#define GPIO116_GPIO		MFP_CFG_IN(GPIO116, AF0)
-#define GPIO117_GPIO		MFP_CFG_IN(GPIO117, AF0)
-#define GPIO118_GPIO		MFP_CFG_IN(GPIO118, AF0)
-#define GPIO119_GPIO		MFP_CFG_IN(GPIO119, AF0)
-#define GPIO120_GPIO		MFP_CFG_IN(GPIO120, AF0)
-
-/* Crystal and Clock Signals */
-#define GPIO9_HZ_CLK		MFP_CFG_OUT(GPIO9,  AF1, DRIVE_LOW)
-#define GPIO10_HZ_CLK		MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
-#define GPIO11_48_MHz		MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW)
-#define GPIO12_48_MHz		MFP_CFG_OUT(GPIO12, AF3, DRIVE_LOW)
-#define GPIO13_CLK_EXT		MFP_CFG_IN(GPIO13, AF1)
-
-/* OS Timer Signals */
-#define GPIO11_EXT_SYNC_0	MFP_CFG_IN(GPIO11, AF1)
-#define GPIO12_EXT_SYNC_1	MFP_CFG_IN(GPIO12, AF1)
-#define GPIO9_CHOUT_0		MFP_CFG_OUT(GPIO9,  AF3, DRIVE_LOW)
-#define GPIO10_CHOUT_1		MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW)
-#define GPIO11_CHOUT_0		MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
-#define GPIO12_CHOUT_1		MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
-
-/* SDRAM and Static Memory I/O Signals */
-#define GPIO20_nSDCS_2		MFP_CFG_OUT(GPIO20, AF1, DRIVE_HIGH)
-#define GPIO21_nSDCS_3		MFP_CFG_OUT(GPIO21, AF1, DRIVE_HIGH)
-#define GPIO15_nCS_1		MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
-#define GPIO78_nCS_2		MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
-#define GPIO79_nCS_3		MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
-#define GPIO80_nCS_4		MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
-#define GPIO33_nCS_5		MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
-
-/* Miscellaneous I/O and DMA Signals */
-#define GPIO21_DVAL_0		MFP_CFG_OUT(GPIO21, AF2, DRIVE_HIGH)
-#define GPIO116_DVAL_0		MFP_CFG_OUT(GPIO116, AF1, DRIVE_HIGH)
-#define GPIO33_DVAL_1		MFP_CFG_OUT(GPIO33, AF1, DRIVE_HIGH)
-#define GPIO96_DVAL_1		MFP_CFG_OUT(GPIO96, AF2, DRIVE_HIGH)
-#define GPIO18_RDY		MFP_CFG_IN(GPIO18, AF1)
-#define GPIO20_DREQ_0		MFP_CFG_IN(GPIO20, AF1)
-#define GPIO115_DREQ_0		MFP_CFG_IN(GPIO115, AF1)
-#define GPIO80_DREQ_1		MFP_CFG_IN(GPIO80, AF1)
-#define GPIO97_DREQ_1		MFP_CFG_IN(GPIO97, AF2)
-#define GPIO85_DREQ_2		MFP_CFG_IN(GPIO85, AF2)
-#define GPIO100_DREQ_2		MFP_CFG_IN(GPIO100, AF2)
-
-/* Alternate Bus Master Mode I/O Signals */
-#define GPIO20_MBREQ		MFP_CFG_IN(GPIO20, AF2)
-#define GPIO80_MBREQ		MFP_CFG_IN(GPIO80, AF2)
-#define GPIO96_MBREQ		MFP_CFG_IN(GPIO96, AF2)
-#define GPIO115_MBREQ		MFP_CFG_IN(GPIO115, AF3)
-#define GPIO21_MBGNT		MFP_CFG_OUT(GPIO21, AF3, DRIVE_LOW)
-#define GPIO33_MBGNT		MFP_CFG_OUT(GPIO33, AF3, DRIVE_LOW)
-#define GPIO97_MBGNT		MFP_CFG_OUT(GPIO97, AF2, DRIVE_LOW)
-#define GPIO116_MBGNT		MFP_CFG_OUT(GPIO116, AF3, DRIVE_LOW)
-
-/* PC CARD */
-#define GPIO15_nPCE_1		MFP_CFG_OUT(GPIO15, AF1, DRIVE_HIGH)
-#define GPIO85_nPCE_1		MFP_CFG_OUT(GPIO85, AF1, DRIVE_HIGH)
-#define GPIO86_nPCE_1		MFP_CFG_OUT(GPIO86, AF1, DRIVE_HIGH)
-#define GPIO102_nPCE_1		MFP_CFG_OUT(GPIO102, AF1, DRIVE_HIGH)
-#define GPIO54_nPCE_2		MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
-#define GPIO78_nPCE_2		MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH)
-#define GPIO87_nPCE_2		MFP_CFG_IN(GPIO87, AF1)
-#define GPIO55_nPREG		MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
-#define GPIO50_nPIOR		MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
-#define GPIO51_nPIOW		MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
-#define GPIO49_nPWE		MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
-#define GPIO48_nPOE		MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
-#define GPIO57_nIOIS16		MFP_CFG_IN(GPIO57, AF1)
-#define GPIO56_nPWAIT		MFP_CFG_IN(GPIO56, AF1)
-#define GPIO79_PSKTSEL		MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH)
-#define GPIO104_PSKTSEL		MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH)
-
-/* I2C */
-#define GPIO117_I2C_SCL		MFP_CFG_IN(GPIO117, AF1)
-#define GPIO118_I2C_SDA		MFP_CFG_IN(GPIO118, AF1)
-
-/* FFUART */
-#define GPIO9_FFUART_CTS	MFP_CFG_IN(GPIO9, AF3)
-#define GPIO26_FFUART_CTS	MFP_CFG_IN(GPIO26, AF3)
-#define GPIO35_FFUART_CTS	MFP_CFG_IN(GPIO35, AF1)
-#define GPIO100_FFUART_CTS	MFP_CFG_IN(GPIO100, AF3)
-#define GPIO10_FFUART_DCD	MFP_CFG_IN(GPIO10, AF1)
-#define GPIO36_FFUART_DCD	MFP_CFG_IN(GPIO36, AF1)
-#define GPIO33_FFUART_DSR	MFP_CFG_IN(GPIO33, AF2)
-#define GPIO37_FFUART_DSR	MFP_CFG_IN(GPIO37, AF1)
-#define GPIO38_FFUART_RI	MFP_CFG_IN(GPIO38, AF1)
-#define GPIO89_FFUART_RI	MFP_CFG_IN(GPIO89, AF3)
-#define GPIO19_FFUART_RXD	MFP_CFG_IN(GPIO19, AF3)
-#define GPIO33_FFUART_RXD	MFP_CFG_IN(GPIO33, AF1)
-#define GPIO34_FFUART_RXD	MFP_CFG_IN(GPIO34, AF1)
-#define GPIO41_FFUART_RXD	MFP_CFG_IN(GPIO41, AF1)
-#define GPIO53_FFUART_RXD	MFP_CFG_IN(GPIO53, AF1)
-#define GPIO85_FFUART_RXD	MFP_CFG_IN(GPIO85, AF1)
-#define GPIO96_FFUART_RXD	MFP_CFG_IN(GPIO96, AF3)
-#define GPIO102_FFUART_RXD	MFP_CFG_IN(GPIO102, AF3)
-#define GPIO16_FFUART_TXD	MFP_CFG_OUT(GPIO16, AF3, DRIVE_HIGH)
-#define GPIO37_FFUART_TXD	MFP_CFG_OUT(GPIO37, AF3, DRIVE_HIGH)
-#define GPIO39_FFUART_TXD	MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
-#define GPIO83_FFUART_TXD	MFP_CFG_OUT(GPIO83, AF2, DRIVE_HIGH)
-#define GPIO99_FFUART_TXD	MFP_CFG_OUT(GPIO99, AF3, DRIVE_HIGH)
-#define GPIO27_FFUART_RTS	MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH)
-#define GPIO41_FFUART_RTS	MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
-#define GPIO83_FFUART_RTS	MFP_CFG_OUT(GPIO83, AF3, DRIVE_HIGH)
-#define GPIO98_FFUART_RTS	MFP_CFG_OUT(GPIO98, AF3, DRIVE_HIGH)
-#define GPIO40_FFUART_DTR	MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
-#define GPIO82_FFUART_DTR	MFP_CFG_OUT(GPIO82, AF3, DRIVE_HIGH)
-
-/* BTUART */
-#define GPIO44_BTUART_CTS	MFP_CFG_IN(GPIO44, AF1)
-#define GPIO42_BTUART_RXD	MFP_CFG_IN(GPIO42, AF1)
-#define GPIO45_BTUART_RTS	MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
-#define GPIO43_BTUART_TXD	MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
-
-/* STUART */
-#define GPIO46_STUART_RXD	MFP_CFG_IN(GPIO46, AF2)
-#define GPIO47_STUART_TXD	MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
-
-/* FICP */
-#define GPIO42_FICP_RXD		MFP_CFG_IN(GPIO42, AF2)
-#define GPIO46_FICP_RXD		MFP_CFG_IN(GPIO46, AF1)
-#define GPIO43_FICP_TXD		MFP_CFG_OUT(GPIO43, AF1, DRIVE_HIGH)
-#define GPIO47_FICP_TXD		MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
-
-/* PWM 0/1/2/3 */
-#define GPIO11_PWM2_OUT		MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW)
-#define GPIO12_PWM3_OUT		MFP_CFG_OUT(GPIO12, AF2, DRIVE_LOW)
-#define GPIO16_PWM0_OUT		MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
-#define GPIO17_PWM1_OUT		MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
-#define GPIO38_PWM1_OUT		MFP_CFG_OUT(GPIO38, AF3, DRIVE_LOW)
-#define GPIO46_PWM2_OUT		MFP_CFG_OUT(GPIO46, AF2, DRIVE_LOW)
-#define GPIO47_PWM3_OUT		MFP_CFG_OUT(GPIO47, AF3, DRIVE_LOW)
-#define GPIO79_PWM2_OUT		MFP_CFG_OUT(GPIO79, AF3, DRIVE_LOW)
-#define GPIO80_PWM3_OUT		MFP_CFG_OUT(GPIO80, AF3, DRIVE_LOW)
-#define GPIO115_PWM1_OUT	MFP_CFG_OUT(GPIO115, AF3, DRIVE_LOW)
-
-/* AC97 */
-#define GPIO31_AC97_SYNC	MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
-#define GPIO94_AC97_SYNC	MFP_CFG_OUT(GPIO94, AF1, DRIVE_LOW)
-#define GPIO30_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
-#define GPIO93_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO93, AF1, DRIVE_LOW)
-#define GPIO45_AC97_SYSCLK	MFP_CFG_OUT(GPIO45, AF1, DRIVE_LOW)
-#define GPIO89_AC97_SYSCLK	MFP_CFG_OUT(GPIO89, AF1, DRIVE_LOW)
-#define GPIO98_AC97_SYSCLK	MFP_CFG_OUT(GPIO98, AF1, DRIVE_LOW)
-#define GPIO95_AC97_nRESET	MFP_CFG_OUT(GPIO95, AF1, DRIVE_LOW)
-#define GPIO113_AC97_nRESET	MFP_CFG_OUT(GPIO113, AF2, DRIVE_LOW)
-#define GPIO28_AC97_BITCLK	MFP_CFG_IN(GPIO28, AF1)
-#define GPIO29_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO29, AF1)
-#define GPIO116_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO116, AF2)
-#define GPIO99_AC97_SDATA_IN_1	MFP_CFG_IN(GPIO99, AF2)
-
-/* I2S */
-#define GPIO28_I2S_BITCLK_IN	MFP_CFG_IN(GPIO28, AF2)
-#define GPIO28_I2S_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
-#define GPIO29_I2S_SDATA_IN	MFP_CFG_IN(GPIO29, AF2)
-#define GPIO30_I2S_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
-#define GPIO31_I2S_SYNC		MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
-#define GPIO113_I2S_SYSCLK	MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW)
-
-/* SSP 1 */
-#define GPIO23_SSP1_SCLK	MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
-#define GPIO29_SSP1_SCLK	MFP_CFG_IN(GPIO29, AF3)
-#define GPIO27_SSP1_SYSCLK	MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW)
-#define GPIO53_SSP1_SYSCLK	MFP_CFG_OUT(GPIO53, AF3, DRIVE_LOW)
-#define GPIO24_SSP1_SFRM	MFP_CFG_IN(GPIO24, AF2)
-#define GPIO28_SSP1_SFRM	MFP_CFG_IN(GPIO28, AF3)
-#define GPIO25_SSP1_TXD		MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
-#define GPIO57_SSP1_TXD		MFP_CFG_OUT(GPIO57, AF3, DRIVE_LOW)
-#define GPIO26_SSP1_RXD		MFP_CFG_IN(GPIO26, AF1)
-#define GPIO27_SSP1_SCLKEN	MFP_CFG_IN(GPIO27, AF2)
-
-/* SSP 2 */
-#define GPIO19_SSP2_SCLK	MFP_CFG_IN(GPIO19, AF1)
-#define GPIO22_SSP2_SCLK	MFP_CFG_IN(GPIO22, AF3)
-#define GPIO29_SSP2_SCLK	MFP_CFG_OUT(GPIO29, AF3, DRIVE_LOW)
-#define GPIO36_SSP2_SCLK	MFP_CFG_IN(GPIO36, AF2)
-#define GPIO50_SSP2_SCLK	MFP_CFG_IN(GPIO50, AF3)
-#define GPIO22_SSP2_SYSCLK	MFP_CFG_OUT(GPIO22, AF2, DRIVE_LOW)
-#define GPIO14_SSP2_SFRM	MFP_CFG_IN(GPIO14, AF2)
-#define GPIO37_SSP2_SFRM	MFP_CFG_IN(GPIO37, AF2)
-#define GPIO87_SSP2_SFRM	MFP_CFG_OUT(GPIO87, AF3, DRIVE_LOW)
-#define GPIO88_SSP2_SFRM	MFP_CFG_IN(GPIO88, AF3)
-#define GPIO13_SSP2_TXD		MFP_CFG_OUT(GPIO13, AF1, DRIVE_LOW)
-#define GPIO38_SSP2_TXD		MFP_CFG_OUT(GPIO38, AF2, DRIVE_LOW)
-#define GPIO87_SSP2_TXD		MFP_CFG_OUT(GPIO87, AF1, DRIVE_LOW)
-#define GPIO89_SSP2_TXD		MFP_CFG_OUT(GPIO89, AF3, DRIVE_LOW)
-#define GPIO11_SSP2_RXD		MFP_CFG_IN(GPIO11, AF2)
-#define GPIO29_SSP2_RXD		MFP_CFG_OUT(GPIO29, AF1, DRIVE_LOW)
-#define GPIO40_SSP2_RXD		MFP_CFG_IN(GPIO40, AF1)
-#define GPIO86_SSP2_RXD		MFP_CFG_IN(GPIO86, AF1)
-#define GPIO88_SSP2_RXD		MFP_CFG_IN(GPIO88, AF2)
-#define GPIO22_SSP2_EXTCLK	MFP_CFG_IN(GPIO22, AF1)
-#define GPIO27_SSP2_EXTCLK	MFP_CFG_IN(GPIO27, AF1)
-#define GPIO22_SSP2_SCLKEN	MFP_CFG_IN(GPIO22, AF2)
-#define GPIO23_SSP2_SCLKEN	MFP_CFG_IN(GPIO23, AF2)
-
-/* SSP 3 */
-#define GPIO34_SSP3_SCLK	MFP_CFG_IN(GPIO34, AF3)
-#define GPIO40_SSP3_SCLK	MFP_CFG_OUT(GPIO40, AF3, DRIVE_LOW)
-#define GPIO52_SSP3_SCLK	MFP_CFG_IN(GPIO52, AF2)
-#define GPIO84_SSP3_SCLK	MFP_CFG_IN(GPIO84, AF1)
-#define GPIO45_SSP3_SYSCLK	MFP_CFG_OUT(GPIO45, AF3, DRIVE_LOW)
-#define GPIO35_SSP3_SFRM	MFP_CFG_IN(GPIO35, AF3)
-#define GPIO39_SSP3_SFRM	MFP_CFG_IN(GPIO39, AF3)
-#define GPIO83_SSP3_SFRM	MFP_CFG_IN(GPIO83, AF1)
-#define GPIO35_SSP3_TXD		MFP_CFG_OUT(GPIO35, AF3, DRIVE_LOW)
-#define GPIO38_SSP3_TXD		MFP_CFG_OUT(GPIO38, AF1, DRIVE_LOW)
-#define GPIO81_SSP3_TXD		MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
-#define GPIO41_SSP3_RXD		MFP_CFG_IN(GPIO41, AF3)
-#define GPIO82_SSP3_RXD		MFP_CFG_IN(GPIO82, AF1)
-#define GPIO89_SSP3_RXD		MFP_CFG_IN(GPIO89, AF1)
-
-/* MMC */
-#define GPIO32_MMC_CLK		MFP_CFG_OUT(GPIO32, AF2, DRIVE_LOW)
-#define GPIO92_MMC_DAT_0	MFP_CFG_IN(GPIO92, AF1)
-#define GPIO109_MMC_DAT_1	MFP_CFG_IN(GPIO109, AF1)
-#define GPIO110_MMC_DAT_2	MFP_CFG_IN(GPIO110, AF1)
-#define GPIO111_MMC_DAT_3	MFP_CFG_IN(GPIO111, AF1)
-#define GPIO112_MMC_CMD		MFP_CFG_IN(GPIO112, AF1)
-
-/* LCD */
-#define GPIO58_LCD_LDD_0	MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
-#define GPIO59_LCD_LDD_1	MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
-#define GPIO60_LCD_LDD_2	MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
-#define GPIO61_LCD_LDD_3	MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
-#define GPIO62_LCD_LDD_4	MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
-#define GPIO63_LCD_LDD_5	MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
-#define GPIO64_LCD_LDD_6	MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
-#define GPIO65_LCD_LDD_7	MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
-#define GPIO66_LCD_LDD_8	MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
-#define GPIO67_LCD_LDD_9	MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
-#define GPIO68_LCD_LDD_10	MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
-#define GPIO69_LCD_LDD_11	MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
-#define GPIO70_LCD_LDD_12	MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
-#define GPIO71_LCD_LDD_13	MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
-#define GPIO72_LCD_LDD_14	MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
-#define GPIO73_LCD_LDD_15	MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
-#define GPIO86_LCD_LDD_16	MFP_CFG_OUT(GPIO86, AF2, DRIVE_LOW)
-#define GPIO87_LCD_LDD_17	MFP_CFG_OUT(GPIO87, AF2, DRIVE_LOW)
-#define GPIO74_LCD_FCLK		MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
-#define GPIO75_LCD_LCLK		MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
-#define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
-#define GPIO77_LCD_BIAS		MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
-#define GPIO14_LCD_VSYNC	MFP_CFG_IN(GPIO14, AF1)
-#define GPIO19_LCD_CS		MFP_CFG_OUT(GPIO19, AF2, DRIVE_LOW)
-
-/* Keypad */
-#define GPIO93_KP_DKIN_0	MFP_CFG_IN(GPIO93, AF1)
-#define GPIO94_KP_DKIN_1	MFP_CFG_IN(GPIO94, AF1)
-#define GPIO95_KP_DKIN_2	MFP_CFG_IN(GPIO95, AF1)
-#define GPIO96_KP_DKIN_3	MFP_CFG_IN(GPIO96, AF1)
-#define GPIO97_KP_DKIN_4	MFP_CFG_IN(GPIO97, AF1)
-#define GPIO98_KP_DKIN_5	MFP_CFG_IN(GPIO98, AF1)
-#define GPIO99_KP_DKIN_6	MFP_CFG_IN(GPIO99, AF1)
-#define GPIO13_KP_KDIN_7	MFP_CFG_IN(GPIO13, AF2)
-#define GPIO100_KP_MKIN_0	MFP_CFG_IN(GPIO100, AF1)
-#define GPIO101_KP_MKIN_1	MFP_CFG_IN(GPIO101, AF1)
-#define GPIO102_KP_MKIN_2	MFP_CFG_IN(GPIO102, AF1)
-#define GPIO34_KP_MKIN_3	MFP_CFG_IN(GPIO34, AF2)
-#define GPIO37_KP_MKIN_3	MFP_CFG_IN(GPIO37, AF3)
-#define GPIO97_KP_MKIN_3	MFP_CFG_IN(GPIO97, AF3)
-#define GPIO98_KP_MKIN_4	MFP_CFG_IN(GPIO98, AF3)
-#define GPIO38_KP_MKIN_4	MFP_CFG_IN(GPIO38, AF2)
-#define GPIO39_KP_MKIN_4	MFP_CFG_IN(GPIO39, AF1)
-#define GPIO16_KP_MKIN_5	MFP_CFG_IN(GPIO16, AF1)
-#define GPIO90_KP_MKIN_5	MFP_CFG_IN(GPIO90, AF1)
-#define GPIO99_KP_MKIN_5	MFP_CFG_IN(GPIO99, AF3)
-#define GPIO17_KP_MKIN_6	MFP_CFG_IN(GPIO17, AF1)
-#define GPIO91_KP_MKIN_6	MFP_CFG_IN(GPIO91, AF1)
-#define GPIO95_KP_MKIN_6	MFP_CFG_IN(GPIO95, AF3)
-#define GPIO13_KP_MKIN_7	MFP_CFG_IN(GPIO13, AF3)
-#define GPIO36_KP_MKIN_7	MFP_CFG_IN(GPIO36, AF3)
-#define GPIO103_KP_MKOUT_0	MFP_CFG_OUT(GPIO103, AF2, DRIVE_HIGH)
-#define GPIO104_KP_MKOUT_1	MFP_CFG_OUT(GPIO104, AF2, DRIVE_HIGH)
-#define GPIO105_KP_MKOUT_2	MFP_CFG_OUT(GPIO105, AF2, DRIVE_HIGH)
-#define GPIO106_KP_MKOUT_3	MFP_CFG_OUT(GPIO106, AF2, DRIVE_HIGH)
-#define GPIO107_KP_MKOUT_4	MFP_CFG_OUT(GPIO107, AF2, DRIVE_HIGH)
-#define GPIO108_KP_MKOUT_5	MFP_CFG_OUT(GPIO108, AF2, DRIVE_HIGH)
-#define GPIO35_KP_MKOUT_6	MFP_CFG_OUT(GPIO35, AF2, DRIVE_HIGH)
-#define GPIO22_KP_MKOUT_7	MFP_CFG_OUT(GPIO22, AF1, DRIVE_HIGH)
-#define GPIO40_KP_MKOUT_6	MFP_CFG_OUT(GPIO40, AF1, DRIVE_HIGH)
-#define GPIO41_KP_MKOUT_7	MFP_CFG_OUT(GPIO41, AF1, DRIVE_HIGH)
-#define GPIO96_KP_MKOUT_6	MFP_CFG_OUT(GPIO96, AF3, DRIVE_HIGH)
-
-/* USB P3 */
-#define GPIO10_USB_P3_5		MFP_CFG_IN(GPIO10, AF3)
-#define GPIO11_USB_P3_1		MFP_CFG_IN(GPIO11, AF3)
-#define GPIO30_USB_P3_2		MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
-#define GPIO31_USB_P3_6		MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
-#define GPIO56_USB_P3_4		MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
-#define GPIO86_USB_P3_5		MFP_CFG_IN(GPIO86, AF3)
-#define GPIO87_USB_P3_1		MFP_CFG_IN(GPIO87, AF3)
-#define GPIO90_USB_P3_5		MFP_CFG_IN(GPIO90, AF2)
-#define GPIO91_USB_P3_1		MFP_CFG_IN(GPIO91, AF2)
-#define GPIO113_USB_P3_3	MFP_CFG_IN(GPIO113, AF3)
-
-/* USB P2 */
-#define GPIO34_USB_P2_2		MFP_CFG_OUT(GPIO34, AF1, DRIVE_LOW)
-#define GPIO35_USB_P2_1		MFP_CFG_IN(GPIO35, AF2)
-#define GPIO36_USB_P2_4		MFP_CFG_OUT(GPIO36, AF1, DRIVE_LOW)
-#define GPIO37_USB_P2_8		MFP_CFG_OUT(GPIO37, AF1, DRIVE_LOW)
-#define GPIO38_USB_P2_3		MFP_CFG_IN(GPIO38, AF3)
-#define GPIO39_USB_P2_6		MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
-#define GPIO40_USB_P2_5		MFP_CFG_IN(GPIO40, AF3)
-#define GPIO41_USB_P2_7		MFP_CFG_IN(GPIO41, AF2)
-#define GPIO53_USB_P2_3		MFP_CFG_IN(GPIO53, AF2)
-
-/* USB Host Port 1/2 */
-#define GPIO88_USBH1_PWR	MFP_CFG_IN(GPIO88, AF1)
-#define GPIO89_USBH1_PEN	MFP_CFG_OUT(GPIO89, AF2, DRIVE_LOW)
-#define GPIO119_USBH2_PWR	MFP_CFG_IN(GPIO119, AF1)
-#define GPIO120_USBH2_PEN	MFP_CFG_OUT(GPIO120, AF2, DRIVE_LOW)
-
-/* QCI - default to Master Mode: CIF_FV/CIF_LV Direction In */
-#define GPIO115_CIF_DD_3	MFP_CFG_IN(GPIO115, AF2)
-#define GPIO116_CIF_DD_2	MFP_CFG_IN(GPIO116, AF1)
-#define GPIO12_CIF_DD_7		MFP_CFG_IN(GPIO12, AF2)
-#define GPIO17_CIF_DD_6		MFP_CFG_IN(GPIO17, AF2)
-#define GPIO23_CIF_MCLK		MFP_CFG_OUT(GPIO23, AF1, DRIVE_LOW)
-#define GPIO24_CIF_FV		MFP_CFG_IN(GPIO24, AF1)
-#define GPIO25_CIF_LV		MFP_CFG_IN(GPIO25, AF1)
-#define GPIO26_CIF_PCLK		MFP_CFG_IN(GPIO26, AF2)
-#define GPIO27_CIF_DD_0		MFP_CFG_IN(GPIO27, AF3)
-#define GPIO42_CIF_MCLK		MFP_CFG_OUT(GPIO42, AF3, DRIVE_LOW)
-#define GPIO43_CIF_FV		MFP_CFG_IN(GPIO43, AF3)
-#define GPIO44_CIF_LV		MFP_CFG_IN(GPIO44, AF3)
-#define GPIO45_CIF_PCLK		MFP_CFG_IN(GPIO45, AF3)
-#define GPIO47_CIF_DD_0		MFP_CFG_IN(GPIO47, AF1)
-#define GPIO48_CIF_DD_5		MFP_CFG_IN(GPIO48, AF1)
-#define GPIO50_CIF_DD_3		MFP_CFG_IN(GPIO50, AF1)
-#define GPIO51_CIF_DD_2		MFP_CFG_IN(GPIO51, AF1)
-#define GPIO52_CIF_DD_4		MFP_CFG_IN(GPIO52, AF1)
-#define GPIO53_CIF_MCLK		MFP_CFG_OUT(GPIO53, AF2, DRIVE_LOW)
-#define GPIO54_CIF_PCLK		MFP_CFG_IN(GPIO54, AF3)
-#define GPIO55_CIF_DD_1		MFP_CFG_IN(GPIO55, AF1)
-#define GPIO81_CIF_DD_0		MFP_CFG_IN(GPIO81, AF2)
-#define GPIO82_CIF_DD_5		MFP_CFG_IN(GPIO82, AF3)
-#define GPIO83_CIF_DD_4		MFP_CFG_IN(GPIO83, AF3)
-#define GPIO84_CIF_FV		MFP_CFG_IN(GPIO84, AF3)
-#define GPIO85_CIF_LV		MFP_CFG_IN(GPIO85, AF3)
-#define GPIO90_CIF_DD_4		MFP_CFG_IN(GPIO90, AF3)
-#define GPIO91_CIF_DD_5		MFP_CFG_IN(GPIO91, AF3)
-#define GPIO93_CIF_DD_6		MFP_CFG_IN(GPIO93, AF2)
-#define GPIO94_CIF_DD_5		MFP_CFG_IN(GPIO94, AF2)
-#define GPIO95_CIF_DD_4		MFP_CFG_IN(GPIO95, AF2)
-#define GPIO98_CIF_DD_0		MFP_CFG_IN(GPIO98, AF2)
-#define GPIO103_CIF_DD_3	MFP_CFG_IN(GPIO103, AF1)
-#define GPIO104_CIF_DD_2	MFP_CFG_IN(GPIO104, AF1)
-#define GPIO105_CIF_DD_1	MFP_CFG_IN(GPIO105, AF1)
-#define GPIO106_CIF_DD_9	MFP_CFG_IN(GPIO106, AF1)
-#define GPIO107_CIF_DD_8	MFP_CFG_IN(GPIO107, AF1)
-#define GPIO108_CIF_DD_7	MFP_CFG_IN(GPIO108, AF1)
-#define GPIO114_CIF_DD_1	MFP_CFG_IN(GPIO114, AF1)
-
-/* Universal Subscriber ID Interface */
-#define GPIO114_UVS0		MFP_CFG_OUT(GPIO114, AF2, DRIVE_LOW)
-#define GPIO115_nUVS1		MFP_CFG_OUT(GPIO115, AF2, DRIVE_LOW)
-#define GPIO116_nUVS2		MFP_CFG_OUT(GPIO116, AF2, DRIVE_LOW)
-#define GPIO14_UCLK		MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW)
-#define GPIO91_UCLK		MFP_CFG_OUT(GPIO91, AF2, DRIVE_LOW)
-#define GPIO19_nURST		MFP_CFG_OUT(GPIO19, AF3, DRIVE_LOW)
-#define GPIO90_nURST		MFP_CFG_OUT(GPIO90, AF2, DRIVE_LOW)
-#define GPIO116_UDET		MFP_CFG_IN(GPIO116, AF3)
-#define GPIO114_UEN		MFP_CFG_OUT(GPIO114, AF1, DRIVE_LOW)
-#define GPIO115_UEN		MFP_CFG_OUT(GPIO115, AF1, DRIVE_LOW)
-
-/* Mobile Scalable Link (MSL) Interface */
-#define GPIO81_BB_OB_DAT_0	MFP_CFG_OUT(GPIO81, AF2, DRIVE_LOW)
-#define GPIO48_BB_OB_DAT_1	MFP_CFG_OUT(GPIO48, AF1, DRIVE_LOW)
-#define GPIO50_BB_OB_DAT_2	MFP_CFG_OUT(GPIO50, AF1, DRIVE_LOW)
-#define GPIO51_BB_OB_DAT_3	MFP_CFG_OUT(GPIO51, AF1, DRIVE_LOW)
-#define GPIO52_BB_OB_CLK	MFP_CFG_OUT(GPIO52, AF1, DRIVE_LOW)
-#define GPIO53_BB_OB_STB	MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
-#define GPIO54_BB_OB_WAIT	MFP_CFG_IN(GPIO54, AF2)
-#define GPIO82_BB_IB_DAT_0	MFP_CFG_IN(GPIO82, AF2)
-#define GPIO55_BB_IB_DAT_1	MFP_CFG_IN(GPIO55, AF2)
-#define GPIO56_BB_IB_DAT_2	MFP_CFG_IN(GPIO56, AF2)
-#define GPIO57_BB_IB_DAT_3	MFP_CFG_IN(GPIO57, AF2)
-#define GPIO83_BB_IB_CLK	MFP_CFG_IN(GPIO83, AF2)
-#define GPIO84_BB_IB_STB	MFP_CFG_IN(GPIO84, AF2)
-#define GPIO85_BB_IB_WAIT	MFP_CFG_OUT(GPIO85, AF2, DRIVE_LOW)
-
-/* Memory Stick Host Controller */
-#define GPIO92_MSBS		MFP_CFG_OUT(GPIO92, AF2, DRIVE_LOW)
-#define GPIO109_MSSDIO		MFP_CFG_IN(GPIO109, AF2)
-#define GPIO112_nMSINS		MFP_CFG_IN(GPIO112, AF2)
-#define GPIO32_MSSCLK		MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
-
-extern int keypad_set_wake(unsigned int on);
-#endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/include/asm-arm/arch-pxa/mfp-pxa2xx.h b/include/asm-arm/arch-pxa/mfp-pxa2xx.h
deleted file mode 100644
index 8de1c0d..0000000
--- a/include/asm-arm/arch-pxa/mfp-pxa2xx.h
+++ /dev/null
@@ -1,133 +0,0 @@
-#ifndef __ASM_ARCH_MFP_PXA2XX_H
-#define __ASM_ARCH_MFP_PXA2XX_H
-
-#include <asm/arch/mfp.h>
-
-/*
- * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
- *
- *  MFP_PIN(x)
- *  MFP_AFx
- *  MFP_LPM_DRIVE_{LOW, HIGH}
- *  MFP_LPM_EDGE_x
- *
- * other MFP_x bit definitions will be ignored
- *
- * and adds the below two bits specifically for pxa2xx:
- *
- * bit     23 - Input/Output (PXA2xx specific)
- * bit     24 - Wakeup Enable(PXA2xx specific)
- */
-
-#define MFP_DIR_IN		(0x0 << 23)
-#define MFP_DIR_OUT		(0x1 << 23)
-#define MFP_DIR_MASK		(0x1 << 23)
-#define MFP_DIR(x)		(((x) >> 23) & 0x1)
-
-#define MFP_LPM_CAN_WAKEUP	(0x1 << 24)
-#define WAKEUP_ON_EDGE_RISE	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
-#define WAKEUP_ON_EDGE_FALL	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL)
-#define WAKEUP_ON_EDGE_BOTH	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH)
-
-/* specifically for enabling wakeup on keypad GPIOs */
-#define WAKEUP_ON_LEVEL_HIGH	(MFP_LPM_CAN_WAKEUP)
-
-#define MFP_CFG_IN(pin, af)		\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_IN))
-
-/* NOTE:  pins configured as output _must_ provide a low power state,
- * and this state should help to minimize the power dissipation.
- */
-#define MFP_CFG_OUT(pin, af, state)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
-
-/* Common configurations for pxa25x and pxa27x
- *
- * Note: pins configured as GPIO are always initialized to input
- * so not to cause any side effect
- */
-#define GPIO0_GPIO	MFP_CFG_IN(GPIO0, AF0)
-#define GPIO1_GPIO	MFP_CFG_IN(GPIO1, AF0)
-#define GPIO9_GPIO	MFP_CFG_IN(GPIO9, AF0)
-#define GPIO10_GPIO	MFP_CFG_IN(GPIO10, AF0)
-#define GPIO11_GPIO	MFP_CFG_IN(GPIO11, AF0)
-#define GPIO12_GPIO	MFP_CFG_IN(GPIO12, AF0)
-#define GPIO13_GPIO	MFP_CFG_IN(GPIO13, AF0)
-#define GPIO14_GPIO	MFP_CFG_IN(GPIO14, AF0)
-#define GPIO15_GPIO	MFP_CFG_IN(GPIO15, AF0)
-#define GPIO16_GPIO	MFP_CFG_IN(GPIO16, AF0)
-#define GPIO17_GPIO	MFP_CFG_IN(GPIO17, AF0)
-#define GPIO18_GPIO	MFP_CFG_IN(GPIO18, AF0)
-#define GPIO19_GPIO	MFP_CFG_IN(GPIO19, AF0)
-#define GPIO20_GPIO	MFP_CFG_IN(GPIO20, AF0)
-#define GPIO21_GPIO	MFP_CFG_IN(GPIO21, AF0)
-#define GPIO22_GPIO	MFP_CFG_IN(GPIO22, AF0)
-#define GPIO23_GPIO	MFP_CFG_IN(GPIO23, AF0)
-#define GPIO24_GPIO	MFP_CFG_IN(GPIO24, AF0)
-#define GPIO25_GPIO	MFP_CFG_IN(GPIO25, AF0)
-#define GPIO26_GPIO	MFP_CFG_IN(GPIO26, AF0)
-#define GPIO27_GPIO	MFP_CFG_IN(GPIO27, AF0)
-#define GPIO28_GPIO	MFP_CFG_IN(GPIO28, AF0)
-#define GPIO29_GPIO	MFP_CFG_IN(GPIO29, AF0)
-#define GPIO30_GPIO	MFP_CFG_IN(GPIO30, AF0)
-#define GPIO31_GPIO	MFP_CFG_IN(GPIO31, AF0)
-#define GPIO32_GPIO	MFP_CFG_IN(GPIO32, AF0)
-#define GPIO33_GPIO	MFP_CFG_IN(GPIO33, AF0)
-#define GPIO34_GPIO	MFP_CFG_IN(GPIO34, AF0)
-#define GPIO35_GPIO	MFP_CFG_IN(GPIO35, AF0)
-#define GPIO36_GPIO	MFP_CFG_IN(GPIO36, AF0)
-#define GPIO37_GPIO	MFP_CFG_IN(GPIO37, AF0)
-#define GPIO38_GPIO	MFP_CFG_IN(GPIO38, AF0)
-#define GPIO39_GPIO	MFP_CFG_IN(GPIO39, AF0)
-#define GPIO40_GPIO	MFP_CFG_IN(GPIO40, AF0)
-#define GPIO41_GPIO	MFP_CFG_IN(GPIO41, AF0)
-#define GPIO42_GPIO	MFP_CFG_IN(GPIO42, AF0)
-#define GPIO43_GPIO	MFP_CFG_IN(GPIO43, AF0)
-#define GPIO44_GPIO	MFP_CFG_IN(GPIO44, AF0)
-#define GPIO45_GPIO	MFP_CFG_IN(GPIO45, AF0)
-#define GPIO46_GPIO	MFP_CFG_IN(GPIO46, AF0)
-#define GPIO47_GPIO	MFP_CFG_IN(GPIO47, AF0)
-#define GPIO48_GPIO	MFP_CFG_IN(GPIO48, AF0)
-#define GPIO49_GPIO	MFP_CFG_IN(GPIO49, AF0)
-#define GPIO50_GPIO	MFP_CFG_IN(GPIO50, AF0)
-#define GPIO51_GPIO	MFP_CFG_IN(GPIO51, AF0)
-#define GPIO52_GPIO	MFP_CFG_IN(GPIO52, AF0)
-#define GPIO53_GPIO	MFP_CFG_IN(GPIO53, AF0)
-#define GPIO54_GPIO	MFP_CFG_IN(GPIO54, AF0)
-#define GPIO55_GPIO	MFP_CFG_IN(GPIO55, AF0)
-#define GPIO56_GPIO	MFP_CFG_IN(GPIO56, AF0)
-#define GPIO57_GPIO	MFP_CFG_IN(GPIO57, AF0)
-#define GPIO58_GPIO	MFP_CFG_IN(GPIO58, AF0)
-#define GPIO59_GPIO	MFP_CFG_IN(GPIO59, AF0)
-#define GPIO60_GPIO	MFP_CFG_IN(GPIO60, AF0)
-#define GPIO61_GPIO	MFP_CFG_IN(GPIO61, AF0)
-#define GPIO62_GPIO	MFP_CFG_IN(GPIO62, AF0)
-#define GPIO63_GPIO	MFP_CFG_IN(GPIO63, AF0)
-#define GPIO64_GPIO	MFP_CFG_IN(GPIO64, AF0)
-#define GPIO65_GPIO	MFP_CFG_IN(GPIO65, AF0)
-#define GPIO66_GPIO	MFP_CFG_IN(GPIO66, AF0)
-#define GPIO67_GPIO	MFP_CFG_IN(GPIO67, AF0)
-#define GPIO68_GPIO	MFP_CFG_IN(GPIO68, AF0)
-#define GPIO69_GPIO	MFP_CFG_IN(GPIO69, AF0)
-#define GPIO70_GPIO	MFP_CFG_IN(GPIO70, AF0)
-#define GPIO71_GPIO	MFP_CFG_IN(GPIO71, AF0)
-#define GPIO72_GPIO	MFP_CFG_IN(GPIO72, AF0)
-#define GPIO73_GPIO	MFP_CFG_IN(GPIO73, AF0)
-#define GPIO74_GPIO	MFP_CFG_IN(GPIO74, AF0)
-#define GPIO75_GPIO	MFP_CFG_IN(GPIO75, AF0)
-#define GPIO76_GPIO	MFP_CFG_IN(GPIO76, AF0)
-#define GPIO77_GPIO	MFP_CFG_IN(GPIO77, AF0)
-#define GPIO78_GPIO	MFP_CFG_IN(GPIO78, AF0)
-#define GPIO79_GPIO	MFP_CFG_IN(GPIO79, AF0)
-#define GPIO80_GPIO	MFP_CFG_IN(GPIO80, AF0)
-#define GPIO81_GPIO	MFP_CFG_IN(GPIO81, AF0)
-#define GPIO82_GPIO	MFP_CFG_IN(GPIO82, AF0)
-#define GPIO83_GPIO	MFP_CFG_IN(GPIO83, AF0)
-#define GPIO84_GPIO	MFP_CFG_IN(GPIO84, AF0)
-
-extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num);
-extern void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm);
-extern int gpio_set_wake(unsigned int gpio, unsigned int on);
-#endif /* __ASM_ARCH_MFP_PXA2XX_H */
diff --git a/include/asm-arm/arch-pxa/mfp-pxa300.h b/include/asm-arm/arch-pxa/mfp-pxa300.h
deleted file mode 100644
index bb41031..0000000
--- a/include/asm-arm/arch-pxa/mfp-pxa300.h
+++ /dev/null
@@ -1,575 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/mfp-pxa300.h
- *
- * PXA300/PXA310 specific MFP configuration definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MFP_PXA300_H
-#define __ASM_ARCH_MFP_PXA300_H
-
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa3xx.h>
-
-/* GPIO */
-#define GPIO46_GPIO		MFP_CFG(GPIO46, AF1)
-#define GPIO49_GPIO		MFP_CFG(GPIO49, AF3)
-#define GPIO50_GPIO		MFP_CFG(GPIO50, AF2)
-#define GPIO51_GPIO		MFP_CFG(GPIO51, AF3)
-#define GPIO52_GPIO		MFP_CFG(GPIO52, AF3)
-#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
-#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
-
-#ifdef CONFIG_CPU_PXA310
-#define GPIO7_2_GPIO		MFP_CFG(GPIO7_2, AF0)
-#define GPIO8_2_GPIO		MFP_CFG(GPIO8_2, AF0)
-#define GPIO9_2_GPIO		MFP_CFG(GPIO9_2, AF0)
-#define GPIO10_2_GPIO		MFP_CFG(GPIO10_2, AF0)
-#define GPIO11_2_GPIO		MFP_CFG(GPIO11_2, AF0)
-#define GPIO12_2_GPIO		MFP_CFG(GPIO12_2, AF0)
-#endif
-
-/* Chip Select */
-#define GPIO2_nCS3		MFP_CFG(GPIO2,  AF1)
-
-/* AC97 */
-#define GPIO23_AC97_nACRESET	MFP_CFG(GPIO23, AF1)
-#define GPIO24_AC97_SYSCLK	MFP_CFG(GPIO24, AF1)
-#define GPIO29_AC97_BITCLK	MFP_CFG(GPIO29, AF1)
-#define GPIO25_AC97_SDATA_IN_0	MFP_CFG(GPIO25, AF1)
-#define GPIO26_AC97_SDATA_IN_1	MFP_CFG(GPIO26, AF1)
-#define GPIO17_AC97_SDATA_IN_2	MFP_CFG(GPIO17, AF3)
-#define GPIO21_AC97_SDATA_IN_2	MFP_CFG(GPIO21, AF2)
-#define GPIO18_AC97_SDATA_IN_3	MFP_CFG(GPIO18, AF3)
-#define GPIO22_AC97_SDATA_IN_3	MFP_CFG(GPIO22, AF2)
-#define GPIO27_AC97_SDATA_OUT	MFP_CFG(GPIO27, AF1)
-#define GPIO28_AC97_SYNC	MFP_CFG(GPIO28, AF1)
-
-/* I2C */
-#define GPIO21_I2C_SCL		MFP_CFG_LPM(GPIO21, AF1, PULL_HIGH)
-#define GPIO22_I2C_SDA		MFP_CFG_LPM(GPIO22, AF1, PULL_HIGH)
-
-/* QCI */
-#define GPIO39_CI_DD_0		MFP_CFG_DRV(GPIO39, AF1, DS04X)
-#define GPIO40_CI_DD_1		MFP_CFG_DRV(GPIO40, AF1, DS04X)
-#define GPIO41_CI_DD_2		MFP_CFG_DRV(GPIO41, AF1, DS04X)
-#define GPIO42_CI_DD_3		MFP_CFG_DRV(GPIO42, AF1, DS04X)
-#define GPIO43_CI_DD_4		MFP_CFG_DRV(GPIO43, AF1, DS04X)
-#define GPIO44_CI_DD_5		MFP_CFG_DRV(GPIO44, AF1, DS04X)
-#define GPIO45_CI_DD_6		MFP_CFG_DRV(GPIO45, AF1, DS04X)
-#define GPIO46_CI_DD_7		MFP_CFG_DRV(GPIO46, AF0, DS04X)
-#define GPIO47_CI_DD_8		MFP_CFG_DRV(GPIO47, AF1, DS04X)
-#define GPIO48_CI_DD_9		MFP_CFG_DRV(GPIO48, AF1, DS04X)
-#define GPIO52_CI_HSYNC		MFP_CFG_DRV(GPIO52, AF0, DS04X)
-#define GPIO51_CI_VSYNC		MFP_CFG_DRV(GPIO51, AF0, DS04X)
-#define GPIO49_CI_MCLK		MFP_CFG_DRV(GPIO49, AF0, DS04X)
-#define GPIO50_CI_PCLK		MFP_CFG_DRV(GPIO50, AF0, DS04X)
-
-/* KEYPAD */
-#define GPIO3_KP_DKIN_6		MFP_CFG_LPM(GPIO3,   AF2, FLOAT)
-#define GPIO4_KP_DKIN_7		MFP_CFG_LPM(GPIO4,   AF2, FLOAT)
-#define GPIO16_KP_DKIN_6	MFP_CFG_LPM(GPIO16,  AF6, FLOAT)
-#define GPIO83_KP_DKIN_2	MFP_CFG_LPM(GPIO83,  AF5, FLOAT)
-#define GPIO84_KP_DKIN_1	MFP_CFG_LPM(GPIO84,  AF5, FLOAT)
-#define GPIO85_KP_DKIN_0	MFP_CFG_LPM(GPIO85,  AF3, FLOAT)
-#define GPIO86_KP_DKIN_1	MFP_CFG_LPM(GPIO86,  AF3, FLOAT)
-#define GPIO87_KP_DKIN_2	MFP_CFG_LPM(GPIO87,  AF3, FLOAT)
-#define GPIO88_KP_DKIN_3	MFP_CFG_LPM(GPIO88,  AF3, FLOAT)
-#define GPIO89_KP_DKIN_3	MFP_CFG_LPM(GPIO89,  AF3, FLOAT)
-#define GPIO107_KP_DKIN_0	MFP_CFG_LPM(GPIO107, AF2, FLOAT)
-#define GPIO108_KP_DKIN_1	MFP_CFG_LPM(GPIO108, AF2, FLOAT)
-#define GPIO109_KP_DKIN_2	MFP_CFG_LPM(GPIO109, AF2, FLOAT)
-#define GPIO110_KP_DKIN_3	MFP_CFG_LPM(GPIO110, AF2, FLOAT)
-#define GPIO111_KP_DKIN_4	MFP_CFG_LPM(GPIO111, AF2, FLOAT)
-#define GPIO112_KP_DKIN_5	MFP_CFG_LPM(GPIO112, AF2, FLOAT)
-#define GPIO113_KP_DKIN_6	MFP_CFG_LPM(GPIO113, AF2, FLOAT)
-#define GPIO114_KP_DKIN_7	MFP_CFG_LPM(GPIO114, AF2, FLOAT)
-#define GPIO115_KP_DKIN_0	MFP_CFG_LPM(GPIO115, AF2, FLOAT)
-#define GPIO116_KP_DKIN_1	MFP_CFG_LPM(GPIO116, AF2, FLOAT)
-#define GPIO117_KP_DKIN_2	MFP_CFG_LPM(GPIO117, AF2, FLOAT)
-#define GPIO118_KP_DKIN_3	MFP_CFG_LPM(GPIO118, AF2, FLOAT)
-#define GPIO119_KP_DKIN_4	MFP_CFG_LPM(GPIO119, AF2, FLOAT)
-#define GPIO120_KP_DKIN_5	MFP_CFG_LPM(GPIO120, AF2, FLOAT)
-#define GPIO121_KP_DKIN_6	MFP_CFG_LPM(GPIO121, AF2, FLOAT)
-#define GPIO122_KP_DKIN_5	MFP_CFG_LPM(GPIO122, AF2, FLOAT)
-#define GPIO123_KP_DKIN_4	MFP_CFG_LPM(GPIO123, AF2, FLOAT)
-#define GPIO124_KP_DKIN_3	MFP_CFG_LPM(GPIO124, AF2, FLOAT)
-#define GPIO127_KP_DKIN_0	MFP_CFG_LPM(GPIO127, AF5, FLOAT)
-#define GPIO0_2_KP_DKIN_0	MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
-#define GPIO1_2_KP_DKIN_1	MFP_CFG_LPM(GPIO1_2, AF2, FLOAT)
-#define GPIO2_2_KP_DKIN_6	MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
-#define GPIO3_2_KP_DKIN_7	MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
-#define GPIO4_2_KP_DKIN_1	MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
-#define GPIO5_2_KP_DKIN_0	MFP_CFG_LPM(GPIO5_2, AF2, FLOAT)
-
-#define GPIO5_KP_MKIN_0		MFP_CFG_LPM(GPIO5,   AF2, FLOAT)
-#define GPIO6_KP_MKIN_1		MFP_CFG_LPM(GPIO6,   AF2, FLOAT)
-#define GPIO9_KP_MKIN_6		MFP_CFG_LPM(GPIO9,   AF3, FLOAT)
-#define GPIO10_KP_MKIN_7	MFP_CFG_LPM(GPIO10,  AF3, FLOAT)
-#define GPIO70_KP_MKIN_6	MFP_CFG_LPM(GPIO70,  AF3, FLOAT)
-#define GPIO71_KP_MKIN_7	MFP_CFG_LPM(GPIO71,  AF3, FLOAT)
-#define GPIO100_KP_MKIN_6	MFP_CFG_LPM(GPIO100, AF7, FLOAT)
-#define GPIO101_KP_MKIN_7	MFP_CFG_LPM(GPIO101, AF7, FLOAT)
-#define GPIO112_KP_MKIN_6	MFP_CFG_LPM(GPIO112, AF4, FLOAT)
-#define GPIO113_KP_MKIN_7	MFP_CFG_LPM(GPIO113, AF4, FLOAT)
-#define GPIO115_KP_MKIN_0	MFP_CFG_LPM(GPIO115, AF1, FLOAT)
-#define GPIO116_KP_MKIN_1	MFP_CFG_LPM(GPIO116, AF1, FLOAT)
-#define GPIO117_KP_MKIN_2	MFP_CFG_LPM(GPIO117, AF1, FLOAT)
-#define GPIO118_KP_MKIN_3	MFP_CFG_LPM(GPIO118, AF1, FLOAT)
-#define GPIO119_KP_MKIN_4	MFP_CFG_LPM(GPIO119, AF1, FLOAT)
-#define GPIO120_KP_MKIN_5	MFP_CFG_LPM(GPIO120, AF1, FLOAT)
-#define GPIO125_KP_MKIN_2	MFP_CFG_LPM(GPIO125, AF2, FLOAT)
-#define GPIO2_2_KP_MKIN_6	MFP_CFG_LPM(GPIO2_2, AF1, FLOAT)
-#define GPIO3_2_KP_MKIN_7	MFP_CFG_LPM(GPIO3_2, AF1, FLOAT)
-
-#define GPIO7_KP_MKOUT_5	MFP_CFG_LPM(GPIO7,   AF1, DRIVE_HIGH)
-#define GPIO11_KP_MKOUT_5	MFP_CFG_LPM(GPIO11,  AF3, DRIVE_HIGH)
-#define GPIO12_KP_MKOUT_6	MFP_CFG_LPM(GPIO12,  AF3, DRIVE_HIGH)
-#define GPIO13_KP_MKOUT_7	MFP_CFG_LPM(GPIO13,  AF3, DRIVE_HIGH)
-#define GPIO19_KP_MKOUT_4	MFP_CFG_LPM(GPIO19,  AF3, DRIVE_HIGH)
-#define GPIO20_KP_MKOUT_5	MFP_CFG_LPM(GPIO20,  AF3, DRIVE_HIGH)
-#define GPIO38_KP_MKOUT_5	MFP_CFG_LPM(GPIO38,  AF5, DRIVE_HIGH)
-#define GPIO53_KP_MKOUT_6	MFP_CFG_LPM(GPIO53,  AF5, DRIVE_HIGH)
-#define GPIO78_KP_MKOUT_7	MFP_CFG_LPM(GPIO78,  AF5, DRIVE_HIGH)
-#define GPIO85_KP_MKOUT_0	MFP_CFG_LPM(GPIO85,  AF2, DRIVE_HIGH)
-#define GPIO86_KP_MKOUT_1	MFP_CFG_LPM(GPIO86,  AF2, DRIVE_HIGH)
-#define GPIO87_KP_MKOUT_2	MFP_CFG_LPM(GPIO87,  AF2, DRIVE_HIGH)
-#define GPIO88_KP_MKOUT_3	MFP_CFG_LPM(GPIO88,  AF2, DRIVE_HIGH)
-#define GPIO104_KP_MKOUT_6	MFP_CFG_LPM(GPIO104, AF5, DRIVE_HIGH)
-#define GPIO105_KP_MKOUT_7	MFP_CFG_LPM(GPIO105, AF5, DRIVE_HIGH)
-#define GPIO121_KP_MKOUT_0	MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
-#define GPIO122_KP_MKOUT_1	MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
-#define GPIO123_KP_MKOUT_2	MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
-#define GPIO124_KP_MKOUT_3	MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
-#define GPIO125_KP_MKOUT_4	MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
-#define GPIO126_KP_MKOUT_7	MFP_CFG_LPM(GPIO126, AF4, DRIVE_HIGH)
-#define GPIO5_2_KP_MKOUT_6	MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
-#define GPIO4_2_KP_MKOUT_5	MFP_CFG_LPM(GPIO4_2, AF1, DRIVE_HIGH)
-#define GPIO6_2_KP_MKOUT_7	MFP_CFG_LPM(GPIO6_2, AF1, DRIVE_HIGH)
-
-/* LCD */
-#define GPIO54_LCD_LDD_0	MFP_CFG_DRV(GPIO54, AF1, DS01X)
-#define GPIO55_LCD_LDD_1	MFP_CFG_DRV(GPIO55, AF1, DS01X)
-#define GPIO56_LCD_LDD_2	MFP_CFG_DRV(GPIO56, AF1, DS01X)
-#define GPIO57_LCD_LDD_3	MFP_CFG_DRV(GPIO57, AF1, DS01X)
-#define GPIO58_LCD_LDD_4	MFP_CFG_DRV(GPIO58, AF1, DS01X)
-#define GPIO59_LCD_LDD_5	MFP_CFG_DRV(GPIO59, AF1, DS01X)
-#define GPIO60_LCD_LDD_6	MFP_CFG_DRV(GPIO60, AF1, DS01X)
-#define GPIO61_LCD_LDD_7	MFP_CFG_DRV(GPIO61, AF1, DS01X)
-#define GPIO62_LCD_LDD_8	MFP_CFG_DRV(GPIO62, AF1, DS01X)
-#define GPIO63_LCD_LDD_9	MFP_CFG_DRV(GPIO63, AF1, DS01X)
-#define GPIO64_LCD_LDD_10	MFP_CFG_DRV(GPIO64, AF1, DS01X)
-#define GPIO65_LCD_LDD_11	MFP_CFG_DRV(GPIO65, AF1, DS01X)
-#define GPIO66_LCD_LDD_12	MFP_CFG_DRV(GPIO66, AF1, DS01X)
-#define GPIO67_LCD_LDD_13	MFP_CFG_DRV(GPIO67, AF1, DS01X)
-#define GPIO68_LCD_LDD_14	MFP_CFG_DRV(GPIO68, AF1, DS01X)
-#define GPIO69_LCD_LDD_15	MFP_CFG_DRV(GPIO69, AF1, DS01X)
-#define GPIO70_LCD_LDD_16	MFP_CFG_DRV(GPIO70, AF1, DS01X)
-#define GPIO71_LCD_LDD_17	MFP_CFG_DRV(GPIO71, AF1, DS01X)
-#define GPIO62_LCD_CS_N		MFP_CFG_DRV(GPIO62, AF2, DS01X)
-#define GPIO72_LCD_FCLK		MFP_CFG_DRV(GPIO72, AF1, DS01X)
-#define GPIO73_LCD_LCLK		MFP_CFG_DRV(GPIO73, AF1, DS01X)
-#define GPIO74_LCD_PCLK		MFP_CFG_DRV(GPIO74, AF1, DS02X)
-#define GPIO75_LCD_BIAS		MFP_CFG_DRV(GPIO75, AF1, DS01X)
-#define GPIO76_LCD_VSYNC	MFP_CFG_DRV(GPIO76, AF2, DS01X)
-
-#define GPIO15_LCD_CS_N		MFP_CFG_DRV(GPIO15,  AF2, DS01X)
-#define GPIO127_LCD_CS_N	MFP_CFG_DRV(GPIO127, AF1, DS01X)
-#define GPIO63_LCD_VSYNC	MFP_CFG_DRV(GPIO63,  AF2, DS01X)
-
-/* Mini-LCD */
-#define GPIO72_MLCD_FCLK	MFP_CFG_DRV(GPIO72, AF7, DS08X)
-#define GPIO73_MLCD_LCLK	MFP_CFG_DRV(GPIO73, AF7, DS08X)
-#define GPIO54_MLCD_LDD_0	MFP_CFG_DRV(GPIO54, AF7, DS08X)
-#define GPIO55_MLCD_LDD_1	MFP_CFG_DRV(GPIO55, AF7, DS08X)
-#define GPIO56_MLCD_LDD_2	MFP_CFG_DRV(GPIO56, AF7, DS08X)
-#define GPIO57_MLCD_LDD_3	MFP_CFG_DRV(GPIO57, AF7, DS08X)
-#define GPIO58_MLCD_LDD_4	MFP_CFG_DRV(GPIO58, AF7, DS08X)
-#define GPIO59_MLCD_LDD_5	MFP_CFG_DRV(GPIO59, AF7, DS08X)
-#define GPIO60_MLCD_LDD_6	MFP_CFG_DRV(GPIO60, AF7, DS08X)
-#define GPIO61_MLCD_LDD_7	MFP_CFG_DRV(GPIO61, AF7, DS08X)
-#define GPIO62_MLCD_LDD_8	MFP_CFG_DRV(GPIO62, AF7, DS08X)
-#define GPIO63_MLCD_LDD_9	MFP_CFG_DRV(GPIO63, AF7, DS08X)
-#define GPIO64_MLCD_LDD_10	MFP_CFG_DRV(GPIO64, AF7, DS08X)
-#define GPIO65_MLCD_LDD_11	MFP_CFG_DRV(GPIO65, AF7, DS08X)
-#define GPIO66_MLCD_LDD_12	MFP_CFG_DRV(GPIO66, AF7, DS08X)
-#define GPIO67_MLCD_LDD_13	MFP_CFG_DRV(GPIO67, AF7, DS08X)
-#define GPIO68_MLCD_LDD_14	MFP_CFG_DRV(GPIO68, AF7, DS08X)
-#define GPIO69_MLCD_LDD_15	MFP_CFG_DRV(GPIO69, AF7, DS08X)
-#define GPIO74_MLCD_PCLK	MFP_CFG_DRV(GPIO74, AF7, DS08X)
-#define GPIO75_MLCD_BIAS	MFP_CFG_DRV(GPIO75, AF2, DS08X)
-
-/* MMC1 */
-#define GPIO7_MMC1_CLK		MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
-#define GPIO8_MMC1_CMD		MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
-#define GPIO14_MMC1_CMD		MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH)
-#define GPIO15_MMC1_CMD		MFP_CFG_LPM(GPIO15, AF5, DRIVE_HIGH)
-#define GPIO3_MMC1_DAT0		MFP_CFG_LPM(GPIO3,  AF4, DRIVE_HIGH)
-#define GPIO4_MMC1_DAT1		MFP_CFG_LPM(GPIO4,  AF4, DRIVE_HIGH)
-#define GPIO5_MMC1_DAT2		MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
-#define GPIO6_MMC1_DAT3		MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
-
-/* MMC2 */
-#define GPIO9_MMC2_DAT0		MFP_CFG_LPM(GPIO9,  AF4, PULL_HIGH)
-#define GPIO10_MMC2_DAT1	MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH)
-#define GPIO11_MMC2_DAT2	MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH)
-#define GPIO12_MMC2_DAT3	MFP_CFG_LPM(GPIO12, AF4, PULL_HIGH)
-#define GPIO13_MMC2_CLK		MFP_CFG_LPM(GPIO13, AF4, PULL_HIGH)
-#define GPIO14_MMC2_CMD		MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH)
-#define GPIO77_MMC2_DAT0	MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
-#define GPIO78_MMC2_DAT1	MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
-#define GPIO79_MMC2_DAT2	MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
-#define GPIO80_MMC2_DAT3	MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
-#define GPIO81_MMC2_CLK		MFP_CFG_LPM(GPIO81, AF4, PULL_HIGH)
-#define GPIO82_MMC2_CMD		MFP_CFG_LPM(GPIO82, AF4, PULL_HIGH)
-
-/* SSP1 */
-#define GPIO89_SSP1_EXTCLK	MFP_CFG(GPIO89, AF1)
-#define GPIO90_SSP1_SYSCLK	MFP_CFG(GPIO90, AF1)
-#define GPIO15_SSP1_SCLK	MFP_CFG(GPIO15, AF6)
-#define GPIO16_SSP1_FRM		MFP_CFG(GPIO16, AF2)
-#define GPIO33_SSP1_SCLK	MFP_CFG(GPIO33, AF5)
-#define GPIO34_SSP1_FRM		MFP_CFG(GPIO34, AF5)
-#define GPIO85_SSP1_SCLK	MFP_CFG(GPIO85, AF1)
-#define GPIO86_SSP1_FRM		MFP_CFG(GPIO86, AF1)
-#define GPIO18_SSP1_TXD		MFP_CFG(GPIO18, AF7)
-#define GPIO18_SSP1_RXD		MFP_CFG(GPIO18, AF2)
-#define GPIO20_SSP1_TXD		MFP_CFG(GPIO20, AF2)
-#define GPIO20_SSP1_RXD		MFP_CFG(GPIO20, AF7)
-#define GPIO35_SSP1_TXD		MFP_CFG(GPIO35, AF5)
-#define GPIO35_SSP1_RXD		MFP_CFG(GPIO35, AF4)
-#define GPIO36_SSP1_TXD		MFP_CFG(GPIO36, AF5)
-#define GPIO36_SSP1_RXD		MFP_CFG(GPIO36, AF6)
-#define GPIO87_SSP1_TXD		MFP_CFG(GPIO87, AF1)
-#define GPIO87_SSP1_RXD		MFP_CFG(GPIO87, AF6)
-#define GPIO88_SSP1_TXD		MFP_CFG(GPIO88, AF6)
-#define GPIO88_SSP1_RXD		MFP_CFG(GPIO88, AF1)
-
-/* SSP2 */
-#define GPIO29_SSP2_EXTCLK	MFP_CFG(GPIO29, AF2)
-#define GPIO23_SSP2_SCLK	MFP_CFG(GPIO23, AF2)
-#define GPIO17_SSP2_FRM		MFP_CFG(GPIO17, AF2)
-#define GPIO25_SSP2_SCLK	MFP_CFG(GPIO25, AF2)
-#define GPIO26_SSP2_FRM		MFP_CFG(GPIO26, AF2)
-#define GPIO33_SSP2_SCLK	MFP_CFG(GPIO33, AF6)
-#define GPIO34_SSP2_FRM		MFP_CFG(GPIO34, AF6)
-#define GPIO64_SSP2_SCLK	MFP_CFG(GPIO64, AF2)
-#define GPIO65_SSP2_FRM		MFP_CFG(GPIO65, AF2)
-#define GPIO19_SSP2_TXD		MFP_CFG(GPIO19, AF2)
-#define GPIO19_SSP2_RXD		MFP_CFG(GPIO19, AF7)
-#define GPIO24_SSP2_TXD		MFP_CFG(GPIO24, AF5)
-#define GPIO24_SSP2_RXD		MFP_CFG(GPIO24, AF4)
-#define GPIO27_SSP2_TXD		MFP_CFG(GPIO27, AF2)
-#define GPIO27_SSP2_RXD		MFP_CFG(GPIO27, AF5)
-#define GPIO28_SSP2_TXD		MFP_CFG(GPIO28, AF5)
-#define GPIO28_SSP2_RXD		MFP_CFG(GPIO28, AF2)
-#define GPIO35_SSP2_TXD		MFP_CFG(GPIO35, AF7)
-#define GPIO35_SSP2_RXD		MFP_CFG(GPIO35, AF6)
-#define GPIO66_SSP2_TXD		MFP_CFG(GPIO66, AF4)
-#define GPIO66_SSP2_RXD		MFP_CFG(GPIO66, AF2)
-#define GPIO67_SSP2_TXD		MFP_CFG(GPIO67, AF2)
-#define GPIO67_SSP2_RXD		MFP_CFG(GPIO67, AF4)
-#define GPIO36_SSP2_TXD		MFP_CFG(GPIO36, AF7)
-
-/* SSP3 */
-#define GPIO69_SSP3_FRM		MFP_CFG_X(GPIO69, AF2, DS08X, DRIVE_LOW)
-#define GPIO68_SSP3_SCLK	MFP_CFG_X(GPIO68, AF2, DS08X, FLOAT)
-#define GPIO92_SSP3_FRM		MFP_CFG_X(GPIO92, AF1, DS08X, DRIVE_LOW)
-#define GPIO91_SSP3_SCLK	MFP_CFG_X(GPIO91, AF1, DS08X, FLOAT)
-#define GPIO70_SSP3_TXD		MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
-#define GPIO70_SSP3_RXD		MFP_CFG_X(GPIO70, AF5, DS08X, FLOAT)
-#define GPIO71_SSP3_TXD		MFP_CFG_X(GPIO71, AF5, DS08X, DRIVE_LOW)
-#define GPIO71_SSP3_RXD		MFP_CFG_X(GPIO71, AF2, DS08X, FLOAT)
-#define GPIO93_SSP3_TXD		MFP_CFG_X(GPIO93, AF1, DS08X, DRIVE_LOW)
-#define GPIO93_SSP3_RXD		MFP_CFG_X(GPIO93, AF5, DS08X, FLOAT)
-#define GPIO94_SSP3_TXD		MFP_CFG_X(GPIO94, AF5, DS08X, DRIVE_LOW)
-#define GPIO94_SSP3_RXD		MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT)
-
-/* SSP4 */
-#define GPIO95_SSP4_SCLK	MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
-#define GPIO96_SSP4_FRM		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
-#define GPIO97_SSP4_TXD		MFP_CFG_LPM(GPIO97, AF1, PULL_HIGH)
-#define GPIO97_SSP4_RXD		MFP_CFG_LPM(GPIO97, AF5, PULL_HIGH)
-#define GPIO98_SSP4_TXD		MFP_CFG_LPM(GPIO98, AF5, PULL_HIGH)
-#define GPIO98_SSP4_RXD		MFP_CFG_LPM(GPIO98, AF1, PULL_HIGH)
-
-/* UART1 */
-#define GPIO32_UART1_CTS	MFP_CFG_LPM(GPIO32,  AF2, FLOAT)
-#define GPIO37_UART1_CTS	MFP_CFG_LPM(GPIO37,  AF4, FLOAT)
-#define GPIO79_UART1_CTS	MFP_CFG_LPM(GPIO79,  AF1, FLOAT)
-#define GPIO84_UART1_CTS	MFP_CFG_LPM(GPIO84,  AF3, FLOAT)
-#define GPIO101_UART1_CTS	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
-#define GPIO106_UART1_CTS	MFP_CFG_LPM(GPIO106, AF6, FLOAT)
-
-#define GPIO32_UART1_RTS	MFP_CFG_LPM(GPIO32,  AF4, FLOAT)
-#define GPIO37_UART1_RTS	MFP_CFG_LPM(GPIO37,  AF2, FLOAT)
-#define GPIO79_UART1_RTS	MFP_CFG_LPM(GPIO79,  AF3, FLOAT)
-#define GPIO84_UART1_RTS	MFP_CFG_LPM(GPIO84,  AF1, FLOAT)
-#define GPIO101_UART1_RTS	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
-#define GPIO106_UART1_RTS	MFP_CFG_LPM(GPIO106, AF1, FLOAT)
-
-#define GPIO34_UART1_DSR	MFP_CFG_LPM(GPIO34,  AF2, FLOAT)
-#define GPIO36_UART1_DSR	MFP_CFG_LPM(GPIO36,  AF4, FLOAT)
-#define GPIO81_UART1_DSR	MFP_CFG_LPM(GPIO81,  AF1, FLOAT)
-#define GPIO83_UART1_DSR	MFP_CFG_LPM(GPIO83,  AF3, FLOAT)
-#define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
-#define GPIO105_UART1_DSR	MFP_CFG_LPM(GPIO105, AF6, FLOAT)
-
-#define GPIO34_UART1_DTR	MFP_CFG_LPM(GPIO34,  AF4, FLOAT)
-#define GPIO36_UART1_DTR	MFP_CFG_LPM(GPIO36,  AF2, FLOAT)
-#define GPIO81_UART1_DTR	MFP_CFG_LPM(GPIO81,  AF3, FLOAT)
-#define GPIO83_UART1_DTR	MFP_CFG_LPM(GPIO83,  AF1, FLOAT)
-#define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
-#define GPIO105_UART1_DTR	MFP_CFG_LPM(GPIO105, AF1, FLOAT)
-
-#define GPIO35_UART1_RI		MFP_CFG_LPM(GPIO35,  AF2, FLOAT)
-#define GPIO82_UART1_RI		MFP_CFG_LPM(GPIO82,  AF1, FLOAT)
-#define GPIO104_UART1_RI	MFP_CFG_LPM(GPIO104, AF1, FLOAT)
-
-#define GPIO33_UART1_DCD	MFP_CFG_LPM(GPIO33,  AF2, FLOAT)
-#define GPIO80_UART1_DCD	MFP_CFG_LPM(GPIO80,  AF1, FLOAT)
-#define GPIO102_UART1_DCD	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
-
-#define GPIO30_UART1_RXD	MFP_CFG_LPM(GPIO30,  AF2, FLOAT)
-#define GPIO31_UART1_RXD	MFP_CFG_LPM(GPIO31,  AF4, FLOAT)
-#define GPIO77_UART1_RXD	MFP_CFG_LPM(GPIO77,  AF1, FLOAT)
-#define GPIO78_UART1_RXD	MFP_CFG_LPM(GPIO78,  AF3, FLOAT)
-#define GPIO99_UART1_RXD	MFP_CFG_LPM(GPIO99,  AF1, FLOAT)
-#define GPIO100_UART1_RXD	MFP_CFG_LPM(GPIO100, AF6, FLOAT)
-#define GPIO102_UART1_RXD	MFP_CFG_LPM(GPIO102, AF6, FLOAT)
-#define GPIO104_UART1_RXD	MFP_CFG_LPM(GPIO104, AF4, FLOAT)
-
-#define GPIO30_UART1_TXD	MFP_CFG_LPM(GPIO30,  AF4, FLOAT)
-#define GPIO31_UART1_TXD	MFP_CFG_LPM(GPIO31,  AF2, FLOAT)
-#define GPIO77_UART1_TXD	MFP_CFG_LPM(GPIO77,  AF3, FLOAT)
-#define GPIO78_UART1_TXD	MFP_CFG_LPM(GPIO78,  AF1, FLOAT)
-#define GPIO99_UART1_TXD	MFP_CFG_LPM(GPIO99,  AF6, FLOAT)
-#define GPIO100_UART1_TXD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
-#define GPIO102_UART1_TXD	MFP_CFG_LPM(GPIO102, AF4, FLOAT)
-
-/* UART2 */
-#define GPIO15_UART2_CTS	MFP_CFG_LPM(GPIO15,  AF3, FLOAT)
-#define GPIO16_UART2_CTS	MFP_CFG_LPM(GPIO16,  AF5, FLOAT)
-#define GPIO111_UART2_CTS	MFP_CFG_LPM(GPIO111, AF3, FLOAT)
-#define GPIO114_UART2_CTS	MFP_CFG_LPM(GPIO114, AF1, FLOAT)
-
-#define GPIO15_UART2_RTS	MFP_CFG_LPM(GPIO15,  AF4, FLOAT)
-#define GPIO16_UART2_RTS	MFP_CFG_LPM(GPIO16,  AF4, FLOAT)
-#define GPIO114_UART2_RTS	MFP_CFG_LPM(GPIO114, AF3, FLOAT)
-#define GPIO111_UART2_RTS	MFP_CFG_LPM(GPIO111, AF1, FLOAT)
-
-#define GPIO18_UART2_RXD	MFP_CFG_LPM(GPIO18,  AF5, FLOAT)
-#define GPIO19_UART2_RXD	MFP_CFG_LPM(GPIO19,  AF4, FLOAT)
-#define GPIO112_UART2_RXD	MFP_CFG_LPM(GPIO112, AF1, FLOAT)
-#define GPIO113_UART2_RXD	MFP_CFG_LPM(GPIO113, AF3, FLOAT)
-
-#define GPIO18_UART2_TXD	MFP_CFG_LPM(GPIO18,  AF4, FLOAT)
-#define GPIO19_UART2_TXD	MFP_CFG_LPM(GPIO19,  AF5, FLOAT)
-#define GPIO112_UART2_TXD	MFP_CFG_LPM(GPIO112, AF3, FLOAT)
-#define GPIO113_UART2_TXD	MFP_CFG_LPM(GPIO113, AF1, FLOAT)
-
-/* UART3 */
-#define GPIO91_UART3_CTS	MFP_CFG_LPM(GPIO91,  AF2, FLOAT)
-#define GPIO92_UART3_CTS	MFP_CFG_LPM(GPIO92,  AF4, FLOAT)
-#define GPIO107_UART3_CTS	MFP_CFG_LPM(GPIO107, AF1, FLOAT)
-#define GPIO108_UART3_CTS	MFP_CFG_LPM(GPIO108, AF3, FLOAT)
-
-#define GPIO91_UART3_RTS	MFP_CFG_LPM(GPIO91,  AF4, FLOAT)
-#define GPIO92_UART3_RTS	MFP_CFG_LPM(GPIO92,  AF2, FLOAT)
-#define GPIO107_UART3_RTS	MFP_CFG_LPM(GPIO107, AF3, FLOAT)
-#define GPIO108_UART3_RTS	MFP_CFG_LPM(GPIO108, AF1, FLOAT)
-
-#define GPIO7_UART3_RXD		MFP_CFG_LPM(GPIO7,   AF2, FLOAT)
-#define GPIO8_UART3_RXD		MFP_CFG_LPM(GPIO8,   AF6, FLOAT)
-#define GPIO93_UART3_RXD	MFP_CFG_LPM(GPIO93,  AF4, FLOAT)
-#define GPIO94_UART3_RXD	MFP_CFG_LPM(GPIO94,  AF2, FLOAT)
-#define GPIO109_UART3_RXD	MFP_CFG_LPM(GPIO109, AF3, FLOAT)
-#define GPIO110_UART3_RXD	MFP_CFG_LPM(GPIO110, AF1, FLOAT)
-
-#define GPIO7_UART3_TXD		MFP_CFG_LPM(GPIO7,   AF6, FLOAT)
-#define GPIO8_UART3_TXD		MFP_CFG_LPM(GPIO8,   AF2, FLOAT)
-#define GPIO93_UART3_TXD	MFP_CFG_LPM(GPIO93,  AF2, FLOAT)
-#define GPIO94_UART3_TXD	MFP_CFG_LPM(GPIO94,  AF4, FLOAT)
-#define GPIO109_UART3_TXD	MFP_CFG_LPM(GPIO109, AF1, FLOAT)
-#define GPIO110_UART3_TXD	MFP_CFG_LPM(GPIO110, AF3, FLOAT)
-
-/* USB Host */
-#define GPIO0_2_USBH_PEN	MFP_CFG(GPIO0_2, AF1)
-#define GPIO1_2_USBH_PWR	MFP_CFG(GPIO1_2, AF1)
-
-/* USB P3 */
-#define GPIO77_USB_P3_1		MFP_CFG(GPIO77,  AF2)
-#define GPIO78_USB_P3_2		MFP_CFG(GPIO78,  AF2)
-#define GPIO79_USB_P3_3		MFP_CFG(GPIO79,  AF2)
-#define GPIO80_USB_P3_4		MFP_CFG(GPIO80,  AF2)
-#define GPIO81_USB_P3_5		MFP_CFG(GPIO81,  AF2)
-#define GPIO82_USB_P3_6		MFP_CFG(GPIO82,  AF2)
-
-/* PWM */
-#define GPIO17_PWM0_OUT		MFP_CFG(GPIO17, AF1)
-#define GPIO18_PWM1_OUT		MFP_CFG(GPIO18, AF1)
-#define GPIO19_PWM2_OUT		MFP_CFG(GPIO19, AF1)
-#define GPIO20_PWM3_OUT		MFP_CFG(GPIO20, AF1)
-
-/* CIR */
-#define GPIO8_CIR_OUT		MFP_CFG(GPIO8, AF5)
-#define GPIO16_CIR_OUT		MFP_CFG(GPIO16, AF3)
-
-#define GPIO20_OW_DQ_IN		MFP_CFG(GPIO20, AF5)
-#define GPIO126_OW_DQ		MFP_CFG(GPIO126, AF2)
-
-#define GPIO0_DF_RDY		MFP_CFG(GPIO0, AF1)
-#define GPIO7_CLK_BYPASS_XSC	MFP_CFG(GPIO7, AF7)
-#define GPIO17_EXT_SYNC_MVT_0	MFP_CFG(GPIO17, AF6)
-#define GPIO18_EXT_SYNC_MVT_1	MFP_CFG(GPIO18, AF6)
-#define GPIO19_OST_CHOUT_MVT_0	MFP_CFG(GPIO19, AF6)
-#define GPIO20_OST_CHOUT_MVT_1	MFP_CFG(GPIO20, AF6)
-#define GPIO49_48M_CLK		MFP_CFG(GPIO49, AF2)
-#define GPIO126_EXT_CLK		MFP_CFG(GPIO126, AF3)
-#define GPIO127_CLK_BYPASS_GB	MFP_CFG(GPIO127, AF7)
-#define GPIO71_EXT_MATCH_MVT	MFP_CFG(GPIO71, AF6)
-
-#define GPIO3_uIO_IN		MFP_CFG(GPIO3, AF1)
-
-#define GPIO4_uSIM_CARD_STATE	MFP_CFG(GPIO4, AF1)
-#define GPIO5_uSIM_uCLK		MFP_CFG(GPIO5, AF1)
-#define GPIO6_uSIM_uRST		MFP_CFG(GPIO6, AF1)
-#define GPIO16_uSIM_UVS_0	MFP_CFG(GPIO16, AF1)
-
-#define GPIO9_SCIO		MFP_CFG(GPIO9, AF1)
-#define GPIO20_RTC_MVT		MFP_CFG(GPIO20, AF4)
-#define GPIO126_RTC_MVT		MFP_CFG(GPIO126, AF1)
-
-/*
- * PXA300 specific MFP configurations
- */
-#ifdef CONFIG_CPU_PXA300
-#define GPIO99_USB_P2_2		MFP_CFG(GPIO99, AF2)
-#define GPIO99_USB_P2_5		MFP_CFG(GPIO99, AF3)
-#define GPIO99_USB_P2_6		MFP_CFG(GPIO99, AF4)
-#define GPIO100_USB_P2_2	MFP_CFG(GPIO100, AF4)
-#define GPIO100_USB_P2_5	MFP_CFG(GPIO100, AF5)
-#define GPIO101_USB_P2_1	MFP_CFG(GPIO101, AF2)
-#define GPIO102_USB_P2_4	MFP_CFG(GPIO102, AF2)
-#define GPIO104_USB_P2_3	MFP_CFG(GPIO104, AF2)
-#define GPIO105_USB_P2_5	MFP_CFG(GPIO105, AF2)
-#define GPIO100_USB_P2_6	MFP_CFG(GPIO100, AF2)
-#define GPIO106_USB_P2_7	MFP_CFG(GPIO106, AF2)
-#define GPIO103_USB_P2_8	MFP_CFG(GPIO103, AF2)
-
-/* U2D UTMI */
-#define GPIO38_UTM_CLK		MFP_CFG(GPIO38,  AF1)
-#define GPIO26_U2D_RXERROR	MFP_CFG(GPIO26,  AF3)
-#define GPIO50_U2D_RXERROR	MFP_CFG(GPIO50,  AF1)
-#define GPIO89_U2D_RXERROR	MFP_CFG(GPIO89,  AF5)
-#define GPIO24_UTM_RXVALID	MFP_CFG(GPIO24,  AF3)
-#define GPIO48_UTM_RXVALID	MFP_CFG(GPIO48,  AF2)
-#define GPIO87_UTM_RXVALID	MFP_CFG(GPIO87,  AF5)
-#define GPIO25_UTM_RXACTIVE	MFP_CFG(GPIO25,  AF3)
-#define GPIO47_UTM_RXACTIVE	MFP_CFG(GPIO47,  AF2)
-#define GPIO49_UTM_RXACTIVE	MFP_CFG(GPIO49,  AF1)
-#define GPIO88_UTM_RXACTIVE	MFP_CFG(GPIO88,  AF5)
-#define GPIO53_UTM_TXREADY	MFP_CFG(GPIO53,  AF1)
-#define GPIO67_UTM_LINESTATE_0	MFP_CFG(GPIO67,  AF3)
-#define GPIO92_UTM_LINESTATE_0	MFP_CFG(GPIO92,  AF3)
-#define GPIO104_UTM_LINESTATE_0	MFP_CFG(GPIO104, AF3)
-#define GPIO109_UTM_LINESTATE_0	MFP_CFG(GPIO109, AF4)
-#define GPIO68_UTM_LINESTATE_1	MFP_CFG(GPIO68,  AF3)
-#define GPIO93_UTM_LINESTATE_1	MFP_CFG(GPIO93,  AF3)
-#define GPIO105_UTM_LINESTATE_1	MFP_CFG(GPIO105, AF3)
-#define GPIO27_U2D_OPMODE_0	MFP_CFG(GPIO27,  AF4)
-#define GPIO51_U2D_OPMODE_0	MFP_CFG(GPIO51,  AF2)
-#define GPIO90_U2D_OPMODE_0	MFP_CFG(GPIO90,  AF7)
-#define GPIO28_U2D_OPMODE_1	MFP_CFG(GPIO28,  AF4)
-#define GPIO52_U2D_OPMODE_1	MFP_CFG(GPIO52,  AF2)
-#define GPIO106_U2D_OPMODE_1	MFP_CFG(GPIO106, AF3)
-#define GPIO110_U2D_OPMODE_1	MFP_CFG(GPIO110, AF5)
-#define GPIO76_U2D_RESET	MFP_CFG(GPIO76,  AF1)
-#define GPIO95_U2D_RESET	MFP_CFG(GPIO95,  AF2)
-#define GPIO100_U2D_RESET	MFP_CFG(GPIO100, AF3)
-#define GPIO66_U2D_SUSPEND	MFP_CFG(GPIO66,  AF3)
-#define GPIO98_U2D_SUSPEND	MFP_CFG(GPIO98,  AF2)
-#define GPIO103_U2D_SUSPEND	MFP_CFG(GPIO103, AF3)
-#define GPIO65_U2D_TERM_SEL	MFP_CFG(GPIO65,  AF5)
-#define GPIO97_U2D_TERM_SEL	MFP_CFG(GPIO97,  AF3)
-#define GPIO102_U2D_TERM_SEL	MFP_CFG(GPIO102, AF5)
-#define GPIO29_U2D_TXVALID	MFP_CFG(GPIO29,  AF3)
-#define GPIO52_U2D_TXVALID	MFP_CFG(GPIO52,  AF4)
-#define GPIO69_U2D_TXVALID	MFP_CFG(GPIO69,  AF3)
-#define GPIO85_U2D_TXVALID	MFP_CFG(GPIO85,  AF7)
-#define GPIO64_U2D_XCVR_SEL	MFP_CFG(GPIO64,  AF5)
-#define GPIO96_U2D_XCVR_SEL	MFP_CFG(GPIO96,  AF3)
-#define GPIO101_U2D_XCVR_SEL	MFP_CFG(GPIO101, AF5)
-#define GPIO30_UTM_PHYDATA_0	MFP_CFG(GPIO30,  AF3)
-#define GPIO31_UTM_PHYDATA_1	MFP_CFG(GPIO31,  AF3)
-#define GPIO32_UTM_PHYDATA_2	MFP_CFG(GPIO32,  AF3)
-#define GPIO33_UTM_PHYDATA_3	MFP_CFG(GPIO33,  AF3)
-#define GPIO34_UTM_PHYDATA_4	MFP_CFG(GPIO34,  AF3)
-#define GPIO35_UTM_PHYDATA_5	MFP_CFG(GPIO35,  AF3)
-#define GPIO36_UTM_PHYDATA_6	MFP_CFG(GPIO36,  AF3)
-#define GPIO37_UTM_PHYDATA_7	MFP_CFG(GPIO37,  AF3)
-#define GPIO39_UTM_PHYDATA_0	MFP_CFG(GPIO39,  AF3)
-#define GPIO40_UTM_PHYDATA_1	MFP_CFG(GPIO40,  AF3)
-#define GPIO41_UTM_PHYDATA_2	MFP_CFG(GPIO41,  AF3)
-#define GPIO42_UTM_PHYDATA_3	MFP_CFG(GPIO42,  AF3)
-#define GPIO43_UTM_PHYDATA_4	MFP_CFG(GPIO43,  AF3)
-#define GPIO44_UTM_PHYDATA_5	MFP_CFG(GPIO44,  AF3)
-#define GPIO45_UTM_PHYDATA_6	MFP_CFG(GPIO45,  AF3)
-#define GPIO46_UTM_PHYDATA_7	MFP_CFG(GPIO46,  AF3)
-#endif /* CONFIG_CPU_PXA300 */
-
-/*
- * PXA310 specific MFP configurations
- */
-#ifdef CONFIG_CPU_PXA310
-/* USB P2 */
-#define GPIO36_USB_P2_1		MFP_CFG(GPIO36, AF1)
-#define GPIO30_USB_P2_2		MFP_CFG(GPIO30, AF1)
-#define GPIO35_USB_P2_3		MFP_CFG(GPIO35, AF1)
-#define GPIO32_USB_P2_4		MFP_CFG(GPIO32, AF1)
-#define GPIO34_USB_P2_5		MFP_CFG(GPIO34, AF1)
-#define GPIO31_USB_P2_6		MFP_CFG(GPIO31, AF1)
-
-/* MMC1 */
-#define GPIO24_MMC1_CMD		MFP_CFG(GPIO24, AF3)
-#define GPIO29_MMC1_DAT0	MFP_CFG(GPIO29, AF3)
-
-/* MMC3 */
-#define GPIO103_MMC3_CLK	MFP_CFG(GPIO103, AF2)
-#define GPIO105_MMC3_CMD	MFP_CFG(GPIO105, AF2)
-#define GPIO11_2_MMC3_CLK	MFP_CFG(GPIO11_2, AF1)
-#define GPIO12_2_MMC3_CMD	MFP_CFG(GPIO12_2, AF1)
-#define GPIO7_2_MMC3_DAT0	MFP_CFG(GPIO7_2, AF1)
-#define GPIO8_2_MMC3_DAT1	MFP_CFG(GPIO8_2, AF1)
-#define GPIO9_2_MMC3_DAT2	MFP_CFG(GPIO9_2, AF1)
-#define GPIO10_2_MMC3_DAT3	MFP_CFG(GPIO10_2, AF1)
-
-/* ULPI */
-#define GPIO38_ULPI_CLK		MFP_CFG(GPIO38, AF1)
-#define GPIO30_ULPI_DATA_OUT_0	MFP_CFG(GPIO30, AF3)
-#define GPIO31_ULPI_DATA_OUT_1	MFP_CFG(GPIO31, AF3)
-#define GPIO32_ULPI_DATA_OUT_2	MFP_CFG(GPIO32, AF3)
-#define GPIO33_ULPI_DATA_OUT_3	MFP_CFG(GPIO33, AF3)
-#define GPIO34_ULPI_DATA_OUT_4	MFP_CFG(GPIO34, AF3)
-#define GPIO35_ULPI_DATA_OUT_5	MFP_CFG(GPIO35, AF3)
-#define GPIO36_ULPI_DATA_OUT_6	MFP_CFG(GPIO36, AF3)
-#define GPIO37_ULPI_DATA_OUT_7	MFP_CFG(GPIO37, AF3)
-#define GPIO33_ULPI_OTG_INTR	MFP_CFG(GPIO33, AF1)
-
-#define ULPI_DIR	MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X)
-#define ULPI_NXT	MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X)
-#define ULPI_STP	MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X)
-#endif /* CONFIG_CPU_PXA310 */
-
-#endif /* __ASM_ARCH_MFP_PXA300_H */
diff --git a/include/asm-arm/arch-pxa/mfp-pxa320.h b/include/asm-arm/arch-pxa/mfp-pxa320.h
deleted file mode 100644
index 576aa46..0000000
--- a/include/asm-arm/arch-pxa/mfp-pxa320.h
+++ /dev/null
@@ -1,447 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/mfp-pxa320.h
- *
- * PXA320 specific MFP configuration definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MFP_PXA320_H
-#define __ASM_ARCH_MFP_PXA320_H
-
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa3xx.h>
-
-/* GPIO */
-#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
-#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
-
-#define GPIO7_2_GPIO		MFP_CFG(GPIO7_2, AF0)
-#define GPIO8_2_GPIO		MFP_CFG(GPIO8_2, AF0)
-#define GPIO9_2_GPIO		MFP_CFG(GPIO9_2, AF0)
-#define GPIO10_2_GPIO		MFP_CFG(GPIO10_2, AF0)
-#define GPIO11_2_GPIO		MFP_CFG(GPIO11_2, AF0)
-#define GPIO12_2_GPIO		MFP_CFG(GPIO12_2, AF0)
-#define GPIO13_2_GPIO		MFP_CFG(GPIO13_2, AF0)
-#define GPIO14_2_GPIO		MFP_CFG(GPIO14_2, AF0)
-#define GPIO15_2_GPIO		MFP_CFG(GPIO15_2, AF0)
-#define GPIO16_2_GPIO		MFP_CFG(GPIO16_2, AF0)
-#define GPIO17_2_GPIO		MFP_CFG(GPIO17_2, AF0)
-
-/* Chip Select */
-#define GPIO4_nCS3		MFP_CFG(GPIO4, AF1)
-
-/* AC97 */
-#define GPIO34_AC97_SYSCLK	MFP_CFG(GPIO34, AF1)
-#define GPIO39_AC97_BITCLK	MFP_CFG(GPIO39, AF1)
-#define GPIO40_AC97_nACRESET	MFP_CFG(GPIO40, AF1)
-#define GPIO35_AC97_SDATA_IN_0	MFP_CFG(GPIO35, AF1)
-#define GPIO36_AC97_SDATA_IN_1	MFP_CFG(GPIO36, AF1)
-#define GPIO32_AC97_SDATA_IN_2	MFP_CFG(GPIO32, AF2)
-#define GPIO33_AC97_SDATA_IN_3	MFP_CFG(GPIO33, AF2)
-#define GPIO11_AC97_SDATA_IN_2	MFP_CFG(GPIO11, AF3)
-#define GPIO12_AC97_SDATA_IN_3	MFP_CFG(GPIO12, AF3)
-#define GPIO37_AC97_SDATA_OUT	MFP_CFG(GPIO37, AF1)
-#define GPIO38_AC97_SYNC	MFP_CFG(GPIO38, AF1)
-
-/* I2C */
-#define GPIO32_I2C_SCL		MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH)
-#define GPIO33_I2C_SDA		MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH)
-
-/* QCI */
-#define GPIO49_CI_DD_0		MFP_CFG_DRV(GPIO49, AF1, DS04X)
-#define GPIO50_CI_DD_1		MFP_CFG_DRV(GPIO50, AF1, DS04X)
-#define GPIO51_CI_DD_2		MFP_CFG_DRV(GPIO51, AF1, DS04X)
-#define GPIO52_CI_DD_3		MFP_CFG_DRV(GPIO52, AF1, DS04X)
-#define GPIO53_CI_DD_4		MFP_CFG_DRV(GPIO53, AF1, DS04X)
-#define GPIO54_CI_DD_5		MFP_CFG_DRV(GPIO54, AF1, DS04X)
-#define GPIO55_CI_DD_6		MFP_CFG_DRV(GPIO55, AF1, DS04X)
-#define GPIO56_CI_DD_7		MFP_CFG_DRV(GPIO56, AF0, DS04X)
-#define GPIO57_CI_DD_8		MFP_CFG_DRV(GPIO57, AF1, DS04X)
-#define GPIO58_CI_DD_9		MFP_CFG_DRV(GPIO58, AF1, DS04X)
-#define GPIO59_CI_MCLK		MFP_CFG_DRV(GPIO59, AF0, DS04X)
-#define GPIO60_CI_PCLK		MFP_CFG_DRV(GPIO60, AF0, DS04X)
-#define GPIO61_CI_HSYNC		MFP_CFG_DRV(GPIO61, AF0, DS04X)
-#define GPIO62_CI_VSYNC		MFP_CFG_DRV(GPIO62, AF0, DS04X)
-
-#define GPIO31_CIR_OUT		MFP_CFG(GPIO31, AF5)
-
-#define GPIO0_2_CLK_EXT		MFP_CFG(GPIO0_2, AF3)
-#define GPIO0_DRQ		MFP_CFG(GPIO0, AF2)
-#define GPIO11_EXT_SYNC0	MFP_CFG(GPIO11, AF5)
-#define GPIO12_EXT_SYNC1	MFP_CFG(GPIO12, AF6)
-#define GPIO0_2_HZ_CLK		MFP_CFG(GPIO0_2, AF1)
-#define GPIO14_HZ_CLK		MFP_CFG(GPIO14, AF4)
-#define GPIO30_ICP_RXD		MFP_CFG(GPIO30, AF1)
-#define GPIO31_ICP_TXD		MFP_CFG(GPIO31, AF1)
-
-#define GPIO83_KP_DKIN_0	MFP_CFG_LPM(GPIO83, AF3, FLOAT)
-#define GPIO84_KP_DKIN_1	MFP_CFG_LPM(GPIO84, AF3, FLOAT)
-#define GPIO85_KP_DKIN_2	MFP_CFG_LPM(GPIO85, AF3, FLOAT)
-#define GPIO86_KP_DKIN_3	MFP_CFG_LPM(GPIO86, AF3, FLOAT)
-
-#define GPIO105_KP_DKIN_0	MFP_CFG_LPM(GPIO105, AF2, FLOAT)
-#define GPIO106_KP_DKIN_1	MFP_CFG_LPM(GPIO106, AF2, FLOAT)
-#define GPIO107_KP_DKIN_2	MFP_CFG_LPM(GPIO107, AF2, FLOAT)
-#define GPIO108_KP_DKIN_3	MFP_CFG_LPM(GPIO108, AF2, FLOAT)
-#define GPIO109_KP_DKIN_4	MFP_CFG_LPM(GPIO109, AF2, FLOAT)
-#define GPIO110_KP_DKIN_5	MFP_CFG_LPM(GPIO110, AF2, FLOAT)
-#define GPIO111_KP_DKIN_6	MFP_CFG_LPM(GPIO111, AF2, FLOAT)
-#define GPIO112_KP_DKIN_7	MFP_CFG_LPM(GPIO112, AF2, FLOAT)
-
-#define GPIO113_KP_DKIN_0	MFP_CFG_LPM(GPIO113, AF2, FLOAT)
-#define GPIO114_KP_DKIN_1	MFP_CFG_LPM(GPIO114, AF2, FLOAT)
-#define GPIO115_KP_DKIN_2	MFP_CFG_LPM(GPIO115, AF2, FLOAT)
-#define GPIO116_KP_DKIN_3	MFP_CFG_LPM(GPIO116, AF2, FLOAT)
-#define GPIO117_KP_DKIN_4	MFP_CFG_LPM(GPIO117, AF2, FLOAT)
-#define GPIO118_KP_DKIN_5	MFP_CFG_LPM(GPIO118, AF2, FLOAT)
-#define GPIO119_KP_DKIN_6	MFP_CFG_LPM(GPIO119, AF2, FLOAT)
-#define GPIO120_KP_DKIN_7	MFP_CFG_LPM(GPIO120, AF2, FLOAT)
-
-#define GPIO127_KP_DKIN_0	MFP_CFG_LPM(GPIO127, AF2, FLOAT)
-#define GPIO126_KP_DKIN_1	MFP_CFG_LPM(GPIO126, AF2, FLOAT)
-
-#define GPIO2_2_KP_DKIN_0	MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
-#define GPIO3_2_KP_DKIN_1	MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
-#define GPIO125_KP_DKIN_2	MFP_CFG_LPM(GPIO125, AF2, FLOAT)
-#define GPIO124_KP_DKIN_3	MFP_CFG_LPM(GPIO124, AF2, FLOAT)
-#define GPIO123_KP_DKIN_4	MFP_CFG_LPM(GPIO123, AF2, FLOAT)
-#define GPIO122_KP_DKIN_5	MFP_CFG_LPM(GPIO122, AF2, FLOAT)
-#define GPIO121_KP_DKIN_6	MFP_CFG_LPM(GPIO121, AF2, FLOAT)
-#define GPIO4_2_KP_DKIN_7	MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
-
-#define GPIO113_KP_MKIN_0	MFP_CFG_LPM(GPIO113, AF1, FLOAT)
-#define GPIO114_KP_MKIN_1	MFP_CFG_LPM(GPIO114, AF1, FLOAT)
-#define GPIO115_KP_MKIN_2	MFP_CFG_LPM(GPIO115, AF1, FLOAT)
-#define GPIO116_KP_MKIN_3	MFP_CFG_LPM(GPIO116, AF1, FLOAT)
-#define GPIO117_KP_MKIN_4	MFP_CFG_LPM(GPIO117, AF1, FLOAT)
-#define GPIO118_KP_MKIN_5	MFP_CFG_LPM(GPIO118, AF1, FLOAT)
-#define GPIO119_KP_MKIN_6	MFP_CFG_LPM(GPIO119, AF1, FLOAT)
-#define GPIO120_KP_MKIN_7	MFP_CFG_LPM(GPIO120, AF1, FLOAT)
-
-#define GPIO83_KP_MKOUT_0	MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH)
-#define GPIO84_KP_MKOUT_1	MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH)
-#define GPIO85_KP_MKOUT_2	MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH)
-#define GPIO86_KP_MKOUT_3	MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH)
-#define GPIO13_KP_MKOUT_4	MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH)
-#define GPIO14_KP_MKOUT_5	MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH)
-
-#define GPIO121_KP_MKOUT_0	MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
-#define GPIO122_KP_MKOUT_1	MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
-#define GPIO123_KP_MKOUT_2	MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
-#define GPIO124_KP_MKOUT_3	MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
-#define GPIO125_KP_MKOUT_4	MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
-#define GPIO126_KP_MKOUT_5	MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH)
-#define GPIO127_KP_MKOUT_6	MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH)
-#define GPIO5_2_KP_MKOUT_7	MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
-
-/* LCD */
-#define GPIO6_2_LCD_LDD_0	MFP_CFG_DRV(GPIO6_2, AF1, DS01X)
-#define GPIO7_2_LCD_LDD_1	MFP_CFG_DRV(GPIO7_2, AF1, DS01X)
-#define GPIO8_2_LCD_LDD_2	MFP_CFG_DRV(GPIO8_2, AF1, DS01X)
-#define GPIO9_2_LCD_LDD_3	MFP_CFG_DRV(GPIO9_2, AF1, DS01X)
-#define GPIO10_2_LCD_LDD_4	MFP_CFG_DRV(GPIO10_2, AF1, DS01X)
-#define GPIO11_2_LCD_LDD_5	MFP_CFG_DRV(GPIO11_2, AF1, DS01X)
-#define GPIO12_2_LCD_LDD_6	MFP_CFG_DRV(GPIO12_2, AF1, DS01X)
-#define GPIO13_2_LCD_LDD_7	MFP_CFG_DRV(GPIO13_2, AF1, DS01X)
-#define GPIO63_LCD_LDD_8	MFP_CFG_DRV(GPIO63, AF1, DS01X)
-#define GPIO64_LCD_LDD_9	MFP_CFG_DRV(GPIO64, AF1, DS01X)
-#define GPIO65_LCD_LDD_10	MFP_CFG_DRV(GPIO65, AF1, DS01X)
-#define GPIO66_LCD_LDD_11	MFP_CFG_DRV(GPIO66, AF1, DS01X)
-#define GPIO67_LCD_LDD_12	MFP_CFG_DRV(GPIO67, AF1, DS01X)
-#define GPIO68_LCD_LDD_13	MFP_CFG_DRV(GPIO68, AF1, DS01X)
-#define GPIO69_LCD_LDD_14	MFP_CFG_DRV(GPIO69, AF1, DS01X)
-#define GPIO70_LCD_LDD_15	MFP_CFG_DRV(GPIO70, AF1, DS01X)
-#define GPIO71_LCD_LDD_16	MFP_CFG_DRV(GPIO71, AF1, DS01X)
-#define GPIO72_LCD_LDD_17	MFP_CFG_DRV(GPIO72, AF1, DS01X)
-#define GPIO73_LCD_CS_N		MFP_CFG_DRV(GPIO73, AF2, DS01X)
-#define GPIO74_LCD_VSYNC	MFP_CFG_DRV(GPIO74, AF2, DS01X)
-#define GPIO14_2_LCD_FCLK	MFP_CFG_DRV(GPIO14_2, AF1, DS01X)
-#define GPIO15_2_LCD_LCLK	MFP_CFG_DRV(GPIO15_2, AF1, DS01X)
-#define GPIO16_2_LCD_PCLK	MFP_CFG_DRV(GPIO16_2, AF1, DS01X)
-#define GPIO17_2_LCD_BIAS	MFP_CFG_DRV(GPIO17_2, AF1, DS01X)
-#define GPIO64_LCD_VSYNC	MFP_CFG_DRV(GPIO64, AF2, DS01X)
-#define GPIO63_LCD_CS_N		MFP_CFG_DRV(GPIO63, AF2, DS01X)
-
-#define GPIO6_2_MLCD_DD_0	MFP_CFG_DRV(GPIO6_2, AF7, DS08X)
-#define GPIO7_2_MLCD_DD_1	MFP_CFG_DRV(GPIO7_2, AF7, DS08X)
-#define GPIO8_2_MLCD_DD_2	MFP_CFG_DRV(GPIO8_2, AF7, DS08X)
-#define GPIO9_2_MLCD_DD_3	MFP_CFG_DRV(GPIO9_2, AF7, DS08X)
-#define GPIO10_2_MLCD_DD_4	MFP_CFG_DRV(GPIO10_2, AF7, DS08X)
-#define GPIO11_2_MLCD_DD_5	MFP_CFG_DRV(GPIO11_2, AF7, DS08X)
-#define GPIO12_2_MLCD_DD_6	MFP_CFG_DRV(GPIO12_2, AF7, DS08X)
-#define GPIO13_2_MLCD_DD_7	MFP_CFG_DRV(GPIO13_2, AF7, DS08X)
-#define GPIO63_MLCD_DD_8	MFP_CFG_DRV(GPIO63, AF7, DS08X)
-#define GPIO64_MLCD_DD_9	MFP_CFG_DRV(GPIO64, AF7, DS08X)
-#define GPIO65_MLCD_DD_10	MFP_CFG_DRV(GPIO65, AF7, DS08X)
-#define GPIO66_MLCD_DD_11	MFP_CFG_DRV(GPIO66, AF7, DS08X)
-#define GPIO67_MLCD_DD_12	MFP_CFG_DRV(GPIO67, AF7, DS08X)
-#define GPIO68_MLCD_DD_13	MFP_CFG_DRV(GPIO68, AF7, DS08X)
-#define GPIO69_MLCD_DD_14	MFP_CFG_DRV(GPIO69, AF7, DS08X)
-#define GPIO70_MLCD_DD_15	MFP_CFG_DRV(GPIO70, AF7, DS08X)
-#define GPIO71_MLCD_DD_16	MFP_CFG_DRV(GPIO71, AF7, DS08X)
-#define GPIO72_MLCD_DD_17	MFP_CFG_DRV(GPIO72, AF7, DS08X)
-#define GPIO73_MLCD_CS		MFP_CFG_DRV(GPIO73, AF7, DS08X)
-#define GPIO74_MLCD_VSYNC	MFP_CFG_DRV(GPIO74, AF7, DS08X)
-#define GPIO14_2_MLCD_FCLK	MFP_CFG_DRV(GPIO14_2, AF7, DS08X)
-#define GPIO15_2_MLCD_LCLK	MFP_CFG_DRV(GPIO15_2, AF7, DS08X)
-#define GPIO16_2_MLCD_PCLK	MFP_CFG_DRV(GPIO16_2, AF7, DS08X)
-#define GPIO17_2_MLCD_BIAS	MFP_CFG_DRV(GPIO17_2, AF7, DS08X)
-
-/* MMC1 */
-#define GPIO9_MMC1_CMD		MFP_CFG_LPM(GPIO9,  AF4, DRIVE_HIGH)
-#define GPIO22_MMC1_CLK		MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH)
-#define GPIO23_MMC1_CMD		MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH)
-#define GPIO30_MMC1_CLK		MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH)
-#define GPIO31_MMC1_CMD		MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH)
-#define GPIO5_MMC1_DAT0		MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
-#define GPIO6_MMC1_DAT1		MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
-#define GPIO7_MMC1_DAT2		MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
-#define GPIO8_MMC1_DAT3		MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
-#define GPIO18_MMC1_DAT0	MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH)
-#define GPIO19_MMC1_DAT1	MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH)
-#define GPIO20_MMC1_DAT2	MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH)
-#define GPIO21_MMC1_DAT3	MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH)
-
-#define GPIO28_MMC2_CLK		MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH)
-#define GPIO29_MMC2_CMD		MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH)
-#define GPIO30_MMC2_CLK		MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH)
-#define GPIO31_MMC2_CMD		MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH)
-#define GPIO79_MMC2_CLK		MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
-#define GPIO80_MMC2_CMD		MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
-
-#define GPIO5_MMC2_DAT0		MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH)
-#define GPIO6_MMC2_DAT1		MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH)
-#define GPIO7_MMC2_DAT2		MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH)
-#define GPIO8_MMC2_DAT3		MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH)
-#define GPIO24_MMC2_DAT0	MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH)
-#define GPIO75_MMC2_DAT0	MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH)
-#define GPIO25_MMC2_DAT1	MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH)
-#define GPIO76_MMC2_DAT1	MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH)
-#define GPIO26_MMC2_DAT2	MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH)
-#define GPIO77_MMC2_DAT2	MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
-#define GPIO27_MMC2_DAT3	MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH)
-#define GPIO78_MMC2_DAT3	MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
-
-/* 1-Wire */
-#define GPIO14_ONE_WIRE		MFP_CFG_LPM(GPIO14,  AF5, FLOAT)
-#define GPIO0_2_ONE_WIRE	MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
-
-/* SSP1 */
-#define GPIO87_SSP1_EXTCLK	MFP_CFG(GPIO87, AF1)
-#define GPIO88_SSP1_SYSCLK	MFP_CFG(GPIO88, AF1)
-#define GPIO83_SSP1_SCLK	MFP_CFG(GPIO83, AF1)
-#define GPIO84_SSP1_SFRM	MFP_CFG(GPIO84, AF1)
-#define GPIO85_SSP1_RXD		MFP_CFG(GPIO85, AF6)
-#define GPIO85_SSP1_TXD		MFP_CFG(GPIO85, AF1)
-#define GPIO86_SSP1_RXD		MFP_CFG(GPIO86, AF1)
-#define GPIO86_SSP1_TXD		MFP_CFG(GPIO86, AF6)
-
-/* SSP2 */
-#define GPIO39_SSP2_EXTCLK	MFP_CFG(GPIO39, AF2)
-#define GPIO40_SSP2_SYSCLK	MFP_CFG(GPIO40, AF2)
-#define GPIO12_SSP2_SCLK	MFP_CFG(GPIO12, AF2)
-#define GPIO35_SSP2_SCLK	MFP_CFG(GPIO35, AF2)
-#define GPIO36_SSP2_SFRM	MFP_CFG(GPIO36, AF2)
-#define GPIO37_SSP2_RXD		MFP_CFG(GPIO37, AF5)
-#define GPIO37_SSP2_TXD		MFP_CFG(GPIO37, AF2)
-#define GPIO38_SSP2_RXD		MFP_CFG(GPIO38, AF2)
-#define GPIO38_SSP2_TXD		MFP_CFG(GPIO38, AF5)
-
-#define GPIO69_SSP3_SCLK	MFP_CFG(GPIO69, AF2, DS08X, FLOAT)
-#define GPIO70_SSP3_FRM		MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW)
-#define GPIO89_SSP3_SCLK	MFP_CFG(GPIO89, AF1, DS08X, FLOAT)
-#define GPIO90_SSP3_FRM		MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW)
-#define GPIO71_SSP3_RXD		MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT)
-#define GPIO71_SSP3_TXD		MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW)
-#define GPIO72_SSP3_RXD		MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT)
-#define GPIO72_SSP3_TXD		MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW)
-#define GPIO91_SSP3_RXD		MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT)
-#define GPIO91_SSP3_TXD		MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW)
-#define GPIO92_SSP3_RXD		MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT)
-#define GPIO92_SSP3_TXD		MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW)
-
-#define GPIO93_SSP4_SCLK	MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH)
-#define GPIO94_SSP4_FRM		MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH)
-#define GPIO94_SSP4_RXD		MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH)
-#define GPIO95_SSP4_RXD		MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH)
-#define GPIO95_SSP4_TXD		MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
-#define GPIO96_SSP4_RXD		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
-#define GPIO96_SSP4_TXD		MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH)
-
-/* UART1 */
-#define GPIO41_UART1_RXD	MFP_CFG_LPM(GPIO41, AF2, FLOAT)
-#define GPIO41_UART1_TXD	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
-#define GPIO42_UART1_RXD	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
-#define GPIO42_UART1_TXD	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
-#define GPIO97_UART1_RXD	MFP_CFG_LPM(GPIO97, AF1, FLOAT)
-#define GPIO97_UART1_TXD	MFP_CFG_LPM(GPIO97, AF6, FLOAT)
-#define GPIO98_UART1_RXD	MFP_CFG_LPM(GPIO98, AF6, FLOAT)
-#define GPIO98_UART1_TXD	MFP_CFG_LPM(GPIO98, AF1, FLOAT)
-#define GPIO43_UART1_CTS	MFP_CFG_LPM(GPIO43, AF2, FLOAT)
-#define GPIO43_UART1_RTS	MFP_CFG_LPM(GPIO43, AF4, FLOAT)
-#define GPIO48_UART1_CTS	MFP_CFG_LPM(GPIO48, AF4, FLOAT)
-#define GPIO48_UART1_RTS	MFP_CFG_LPM(GPIO48, AF2, FLOAT)
-#define GPIO99_UART1_CTS	MFP_CFG_LPM(GPIO99, AF1, FLOAT)
-#define GPIO99_UART1_RTS	MFP_CFG_LPM(GPIO99, AF6, FLOAT)
-#define GPIO104_UART1_CTS	MFP_CFG_LPM(GPIO104, AF6, FLOAT)
-#define GPIO104_UART1_RTS	MFP_CFG_LPM(GPIO104, AF1, FLOAT)
-#define GPIO45_UART1_DTR	MFP_CFG_LPM(GPIO45, AF4, FLOAT)
-#define GPIO45_UART1_DSR	MFP_CFG_LPM(GPIO45, AF2, FLOAT)
-#define GPIO47_UART1_DTR	MFP_CFG_LPM(GPIO47, AF2, FLOAT)
-#define GPIO47_UART1_DSR	MFP_CFG_LPM(GPIO47, AF4, FLOAT)
-#define GPIO101_UART1_DTR	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
-#define GPIO101_UART1_DSR	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
-#define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
-#define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
-#define GPIO44_UART1_DCD	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
-#define GPIO100_UART1_DCD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
-#define GPIO46_UART1_RI		MFP_CFG_LPM(GPIO46, AF2, FLOAT)
-#define GPIO102_UART1_RI	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
-
-/* UART2 */
-#define GPIO109_UART2_CTS	MFP_CFG_LPM(GPIO109, AF3, FLOAT)
-#define GPIO109_UART2_RTS	MFP_CFG_LPM(GPIO109, AF1, FLOAT)
-#define GPIO112_UART2_CTS	MFP_CFG_LPM(GPIO112, AF1, FLOAT)
-#define GPIO112_UART2_RTS	MFP_CFG_LPM(GPIO112, AF3, FLOAT)
-#define GPIO110_UART2_RXD	MFP_CFG_LPM(GPIO110, AF1, FLOAT)
-#define GPIO110_UART2_TXD	MFP_CFG_LPM(GPIO110, AF3, FLOAT)
-#define GPIO111_UART2_RXD	MFP_CFG_LPM(GPIO111, AF3, FLOAT)
-#define GPIO111_UART2_TXD	MFP_CFG_LPM(GPIO111, AF1, FLOAT)
-
-/* UART3 */
-#define GPIO89_UART3_CTS	MFP_CFG_LPM(GPIO89, AF2, FLOAT)
-#define GPIO89_UART3_RTS	MFP_CFG_LPM(GPIO89, AF4, FLOAT)
-#define GPIO90_UART3_CTS	MFP_CFG_LPM(GPIO90, AF4, FLOAT)
-#define GPIO90_UART3_RTS	MFP_CFG_LPM(GPIO90, AF2, FLOAT)
-#define GPIO105_UART3_CTS	MFP_CFG_LPM(GPIO105, AF1, FLOAT)
-#define GPIO105_UART3_RTS	MFP_CFG_LPM(GPIO105, AF3, FLOAT)
-#define GPIO106_UART3_CTS	MFP_CFG_LPM(GPIO106, AF3, FLOAT)
-#define GPIO106_UART3_RTS	MFP_CFG_LPM(GPIO106, AF1, FLOAT)
-#define GPIO30_UART3_RXD	MFP_CFG_LPM(GPIO30, AF2, FLOAT)
-#define GPIO30_UART3_TXD	MFP_CFG_LPM(GPIO30, AF6, FLOAT)
-#define GPIO31_UART3_RXD	MFP_CFG_LPM(GPIO31, AF6, FLOAT)
-#define GPIO31_UART3_TXD	MFP_CFG_LPM(GPIO31, AF2, FLOAT)
-#define GPIO91_UART3_RXD	MFP_CFG_LPM(GPIO91, AF4, FLOAT)
-#define GPIO91_UART3_TXD	MFP_CFG_LPM(GPIO91, AF2, FLOAT)
-#define GPIO92_UART3_RXD	MFP_CFG_LPM(GPIO92, AF2, FLOAT)
-#define GPIO92_UART3_TXD	MFP_CFG_LPM(GPIO92, AF4, FLOAT)
-#define GPIO107_UART3_RXD	MFP_CFG_LPM(GPIO107, AF3, FLOAT)
-#define GPIO107_UART3_TXD	MFP_CFG_LPM(GPIO107, AF1, FLOAT)
-#define GPIO108_UART3_RXD	MFP_CFG_LPM(GPIO108, AF1, FLOAT)
-#define GPIO108_UART3_TXD	MFP_CFG_LPM(GPIO108, AF3, FLOAT)
-
-
-/* USB 2.0 UTMI */
-#define GPIO10_UTM_CLK		MFP_CFG(GPIO10, AF1)
-#define GPIO36_U2D_RXERROR	MFP_CFG(GPIO36, AF3)
-#define GPIO60_U2D_RXERROR	MFP_CFG(GPIO60, AF1)
-#define GPIO87_U2D_RXERROR	MFP_CFG(GPIO87, AF5)
-#define GPIO34_UTM_RXVALID	MFP_CFG(GPIO34, AF3)
-#define GPIO58_UTM_RXVALID	MFP_CFG(GPIO58, AF2)
-#define GPIO85_UTM_RXVALID	MFP_CFG(GPIO85, AF5)
-#define GPIO35_UTM_RXACTIVE	MFP_CFG(GPIO35, AF3)
-#define GPIO59_UTM_RXACTIVE	MFP_CFG(GPIO59, AF1)
-#define GPIO86_UTM_RXACTIVE	MFP_CFG(GPIO86, AF5)
-#define GPIO73_UTM_TXREADY	MFP_CFG(GPIO73, AF1)
-#define GPIO68_UTM_LINESTATE_0	MFP_CFG(GPIO68, AF3)
-#define GPIO90_UTM_LINESTATE_0	MFP_CFG(GPIO90, AF3)
-#define GPIO102_UTM_LINESTATE_0	MFP_CFG(GPIO102, AF3)
-#define GPIO107_UTM_LINESTATE_0	MFP_CFG(GPIO107, AF4)
-#define GPIO69_UTM_LINESTATE_1	MFP_CFG(GPIO69, AF3)
-#define GPIO91_UTM_LINESTATE_1	MFP_CFG(GPIO91, AF3)
-#define GPIO103_UTM_LINESTATE_1	MFP_CFG(GPIO103, AF3)
-
-#define GPIO41_U2D_PHYDATA_0	MFP_CFG(GPIO41, AF3)
-#define GPIO42_U2D_PHYDATA_1	MFP_CFG(GPIO42, AF3)
-#define GPIO43_U2D_PHYDATA_2	MFP_CFG(GPIO43, AF3)
-#define GPIO44_U2D_PHYDATA_3	MFP_CFG(GPIO44, AF3)
-#define GPIO45_U2D_PHYDATA_4	MFP_CFG(GPIO45, AF3)
-#define GPIO46_U2D_PHYDATA_5	MFP_CFG(GPIO46, AF3)
-#define GPIO47_U2D_PHYDATA_6	MFP_CFG(GPIO47, AF3)
-#define GPIO48_U2D_PHYDATA_7	MFP_CFG(GPIO48, AF3)
-
-#define GPIO49_U2D_PHYDATA_0	MFP_CFG(GPIO49, AF3)
-#define GPIO50_U2D_PHYDATA_1	MFP_CFG(GPIO50, AF3)
-#define GPIO51_U2D_PHYDATA_2	MFP_CFG(GPIO51, AF3)
-#define GPIO52_U2D_PHYDATA_3	MFP_CFG(GPIO52, AF3)
-#define GPIO53_U2D_PHYDATA_4	MFP_CFG(GPIO53, AF3)
-#define GPIO54_U2D_PHYDATA_5	MFP_CFG(GPIO54, AF3)
-#define GPIO55_U2D_PHYDATA_6	MFP_CFG(GPIO55, AF3)
-#define GPIO56_U2D_PHYDATA_7	MFP_CFG(GPIO56, AF3)
-
-#define GPIO37_U2D_OPMODE0	MFP_CFG(GPIO37, AF4)
-#define GPIO61_U2D_OPMODE0	MFP_CFG(GPIO61, AF2)
-#define GPIO88_U2D_OPMODE0	MFP_CFG(GPIO88, AF7)
-
-#define GPIO38_U2D_OPMODE1	MFP_CFG(GPIO38, AF4)
-#define GPIO62_U2D_OPMODE1	MFP_CFG(GPIO62, AF2)
-#define GPIO104_U2D_OPMODE1	MFP_CFG(GPIO104, AF4)
-#define GPIO108_U2D_OPMODE1	MFP_CFG(GPIO108, AF5)
-
-#define GPIO74_U2D_RESET	MFP_CFG(GPIO74, AF1)
-#define GPIO93_U2D_RESET	MFP_CFG(GPIO93, AF2)
-#define GPIO98_U2D_RESET	MFP_CFG(GPIO98, AF3)
-
-#define GPIO67_U2D_SUSPEND	MFP_CFG(GPIO67, AF3)
-#define GPIO96_U2D_SUSPEND	MFP_CFG(GPIO96, AF2)
-#define GPIO101_U2D_SUSPEND	MFP_CFG(GPIO101, AF3)
-
-#define GPIO66_U2D_TERM_SEL	MFP_CFG(GPIO66, AF5)
-#define GPIO95_U2D_TERM_SEL	MFP_CFG(GPIO95, AF3)
-#define GPIO97_U2D_TERM_SEL	MFP_CFG(GPIO97, AF7)
-#define GPIO100_U2D_TERM_SEL	MFP_CFG(GPIO100, AF5)
-
-#define GPIO39_U2D_TXVALID	MFP_CFG(GPIO39, AF4)
-#define GPIO70_U2D_TXVALID	MFP_CFG(GPIO70, AF5)
-#define GPIO83_U2D_TXVALID	MFP_CFG(GPIO83, AF7)
-
-#define GPIO65_U2D_XCVR_SEL	MFP_CFG(GPIO65, AF5)
-#define GPIO94_U2D_XCVR_SEL	MFP_CFG(GPIO94, AF3)
-#define GPIO99_U2D_XCVR_SEL	MFP_CFG(GPIO99, AF5)
-
-/* USB Host 1.1 */
-#define GPIO2_2_USBH_PEN	MFP_CFG(GPIO2_2, AF1)
-#define GPIO3_2_USBH_PWR	MFP_CFG(GPIO3_2, AF1)
-
-/* USB P2 */
-#define GPIO97_USB_P2_2		MFP_CFG(GPIO97, AF2)
-#define GPIO97_USB_P2_6		MFP_CFG(GPIO97, AF4)
-#define GPIO98_USB_P2_2		MFP_CFG(GPIO98, AF4)
-#define GPIO98_USB_P2_6		MFP_CFG(GPIO98, AF2)
-#define GPIO99_USB_P2_1		MFP_CFG(GPIO99, AF2)
-#define GPIO100_USB_P2_4	MFP_CFG(GPIO100, AF2)
-#define GPIO101_USB_P2_8	MFP_CFG(GPIO101, AF2)
-#define GPIO102_USB_P2_3	MFP_CFG(GPIO102, AF2)
-#define GPIO103_USB_P2_5	MFP_CFG(GPIO103, AF2)
-#define GPIO104_USB_P2_7	MFP_CFG(GPIO104, AF2)
-
-/* USB P3 */
-#define GPIO75_USB_P3_1		MFP_CFG(GPIO75, AF2)
-#define GPIO76_USB_P3_2		MFP_CFG(GPIO76, AF2)
-#define GPIO77_USB_P3_3		MFP_CFG(GPIO77, AF2)
-#define GPIO78_USB_P3_4		MFP_CFG(GPIO78, AF2)
-#define GPIO79_USB_P3_5		MFP_CFG(GPIO79, AF2)
-#define GPIO80_USB_P3_6		MFP_CFG(GPIO80, AF2)
-
-#define GPIO13_CHOUT0		MFP_CFG(GPIO13, AF6)
-#define GPIO14_CHOUT1		MFP_CFG(GPIO14, AF6)
-
-#define GPIO2_RDY		MFP_CFG(GPIO2, AF1)
-#define GPIO5_NPIOR		MFP_CFG(GPIO5, AF3)
-
-#define GPIO11_PWM0_OUT		MFP_CFG(GPIO11, AF1)
-#define GPIO12_PWM1_OUT		MFP_CFG(GPIO12, AF1)
-#define GPIO13_PWM2_OUT		MFP_CFG(GPIO13, AF1)
-#define GPIO14_PWM3_OUT		MFP_CFG(GPIO14, AF1)
-
-#endif /* __ASM_ARCH_MFP_PXA320_H */
diff --git a/include/asm-arm/arch-pxa/mfp-pxa930.h b/include/asm-arm/arch-pxa/mfp-pxa930.h
deleted file mode 100644
index c4e945a..0000000
--- a/include/asm-arm/arch-pxa/mfp-pxa930.h
+++ /dev/null
@@ -1,491 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/mfp-pxa930.h
- *
- * PXA930 specific MFP configuration definitions
- *
- * Copyright (C) 2007-2008 Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MFP_PXA9xx_H
-#define __ASM_ARCH_MFP_PXA9xx_H
-
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa3xx.h>
-
-/* GPIO */
-#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
-#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
-#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
-#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
-
-#define GSIM_UCLK_GPIO_79	MFP_CFG(GSIM_UCLK, AF0)
-#define GSIM_UIO_GPIO_80	MFP_CFG(GSIM_UIO, AF0)
-#define GSIM_nURST_GPIO_81	MFP_CFG(GSIM_nURST, AF0)
-#define GSIM_UDET_GPIO_82	MFP_CFG(GSIM_UDET, AF0)
-
-#define DF_IO15_GPIO_28		MFP_CFG(DF_IO15, AF0)
-#define DF_IO14_GPIO_29		MFP_CFG(DF_IO14, AF0)
-#define DF_IO13_GPIO_30		MFP_CFG(DF_IO13, AF0)
-#define DF_IO12_GPIO_31		MFP_CFG(DF_IO12, AF0)
-#define DF_IO11_GPIO_32		MFP_CFG(DF_IO11, AF0)
-#define DF_IO10_GPIO_33		MFP_CFG(DF_IO10, AF0)
-#define DF_IO9_GPIO_34		MFP_CFG(DF_IO9, AF0)
-#define DF_IO8_GPIO_35		MFP_CFG(DF_IO8, AF0)
-#define DF_IO7_GPIO_36		MFP_CFG(DF_IO7, AF0)
-#define DF_IO6_GPIO_37		MFP_CFG(DF_IO6, AF0)
-#define DF_IO5_GPIO_38		MFP_CFG(DF_IO5, AF0)
-#define DF_IO4_GPIO_39		MFP_CFG(DF_IO4, AF0)
-#define DF_IO3_GPIO_40		MFP_CFG(DF_IO3, AF0)
-#define DF_IO2_GPIO_41		MFP_CFG(DF_IO2, AF0)
-#define DF_IO1_GPIO_42		MFP_CFG(DF_IO1, AF0)
-#define DF_IO0_GPIO_43		MFP_CFG(DF_IO0, AF0)
-#define DF_nCS0_GPIO_44		MFP_CFG(DF_nCS0, AF0)
-#define DF_nCS1_GPIO_45		MFP_CFG(DF_nCS1, AF0)
-#define DF_nWE_GPIO_46		MFP_CFG(DF_nWE, AF0)
-#define DF_nRE_nOE_GPIO_47	MFP_CFG(DF_nRE_nOE, AF0)
-#define DF_CLE_nOE_GPIO_48	MFP_CFG(DF_CLE_nOE, AF0)
-#define DF_nADV1_ALE_GPIO_49	MFP_CFG(DF_nADV1_ALE, AF0)
-#define DF_nADV2_ALE_GPIO_50	MFP_CFG(DF_nADV2_ALE, AF0)
-#define DF_INT_RnB_GPIO_51	MFP_CFG(DF_INT_RnB, AF0)
-#define DF_SCLK_E_GPIO_52	MFP_CFG(DF_SCLK_E, AF0)
-
-#define DF_ADDR0_GPIO_53	MFP_CFG(DF_ADDR0, AF0)
-#define DF_ADDR1_GPIO_54	MFP_CFG(DF_ADDR1, AF0)
-#define DF_ADDR2_GPIO_55	MFP_CFG(DF_ADDR2, AF0)
-#define DF_ADDR3_GPIO_56	MFP_CFG(DF_ADDR3, AF0)
-#define nXCVREN_GPIO_57		MFP_CFG(nXCVREN, AF0)
-#define nLUA_GPIO_58		MFP_CFG(nLUA, AF0)
-#define nLLA_GPIO_59		MFP_CFG(nLLA, AF0)
-#define nBE0_GPIO_60		MFP_CFG(nBE0, AF0)
-#define nBE1_GPIO_61		MFP_CFG(nBE1, AF0)
-#define RDY_GPIO_62		MFP_CFG(RDY, AF0)
-
-/* Chip Select */
-#define DF_nCS0_nCS2		MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH)
-#define DF_nCS1_nCS3		MFP_CFG_LPM(DF_nCS1, AF3, PULL_HIGH)
-
-/* AC97 */
-#define GPIO83_BAC97_SYSCLK	MFP_CFG(GPIO83, AF3)
-#define GPIO84_BAC97_SDATA_IN0	MFP_CFG(GPIO84, AF3)
-#define GPIO85_BAC97_BITCLK	MFP_CFG(GPIO85, AF3)
-#define GPIO86_BAC97_nRESET	MFP_CFG(GPIO86, AF3)
-#define GPIO87_BAC97_SYNC	MFP_CFG(GPIO87, AF3)
-#define GPIO88_BAC97_SDATA_OUT	MFP_CFG(GPIO88, AF3)
-
-/* I2C */
-#define GPIO39_CI2C_SCL		MFP_CFG_LPM(GPIO39, AF3, PULL_HIGH)
-#define GPIO40_CI2C_SDA		MFP_CFG_LPM(GPIO40, AF3, PULL_HIGH)
-
-#define GPIO51_CI2C_SCL		MFP_CFG_LPM(GPIO51, AF3, PULL_HIGH)
-#define GPIO52_CI2C_SDA		MFP_CFG_LPM(GPIO52, AF3, PULL_HIGH)
-
-#define GPIO63_CI2C_SCL		MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH)
-#define GPIO64_CI2C_SDA		MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH)
-
-#define GPIO77_CI2C_SCL		MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH)
-#define GPIO78_CI2C_SDA		MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH)
-
-#define GPIO89_CI2C_SCL		MFP_CFG_LPM(GPIO89, AF1, PULL_HIGH)
-#define GPIO90_CI2C_SDA		MFP_CFG_LPM(GPIO90, AF1, PULL_HIGH)
-
-#define GPIO95_CI2C_SCL		MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
-#define GPIO96_CI2C_SDA		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
-
-#define GPIO97_CI2C_SCL		MFP_CFG_LPM(GPIO97, AF3, PULL_HIGH)
-#define GPIO98_CI2C_SDA		MFP_CFG_LPM(GPIO98, AF3, PULL_HIGH)
-
-/* QCI */
-#define GPIO63_CI_DD_9		MFP_CFG_LPM(GPIO63, AF1, PULL_LOW)
-#define GPIO64_CI_DD_8		MFP_CFG_LPM(GPIO64, AF1, PULL_LOW)
-#define GPIO65_CI_DD_7		MFP_CFG_LPM(GPIO65, AF1, PULL_LOW)
-#define GPIO66_CI_DD_6		MFP_CFG_LPM(GPIO66, AF1, PULL_LOW)
-#define GPIO67_CI_DD_5		MFP_CFG_LPM(GPIO67, AF1, PULL_LOW)
-#define GPIO68_CI_DD_4		MFP_CFG_LPM(GPIO68, AF1, PULL_LOW)
-#define GPIO69_CI_DD_3		MFP_CFG_LPM(GPIO69, AF1, PULL_LOW)
-#define GPIO70_CI_DD_2		MFP_CFG_LPM(GPIO70, AF1, PULL_LOW)
-#define GPIO71_CI_DD_1		MFP_CFG_LPM(GPIO71, AF1, PULL_LOW)
-#define GPIO72_CI_DD_0		MFP_CFG_LPM(GPIO72, AF1, PULL_LOW)
-#define GPIO73_CI_HSYNC		MFP_CFG_LPM(GPIO73, AF1, PULL_LOW)
-#define GPIO74_CI_VSYNC		MFP_CFG_LPM(GPIO74, AF1, PULL_LOW)
-#define GPIO75_CI_MCLK		MFP_CFG_LPM(GPIO75, AF1, PULL_LOW)
-#define GPIO76_CI_PCLK		MFP_CFG_LPM(GPIO76, AF1, PULL_LOW)
-
-/* KEYPAD */
-#define GPIO4_KP_DKIN_4		MFP_CFG_LPM(GPIO4, AF3, FLOAT)
-#define GPIO5_KP_DKIN_5		MFP_CFG_LPM(GPIO5, AF3, FLOAT)
-#define GPIO6_KP_DKIN_6		MFP_CFG_LPM(GPIO6, AF3, FLOAT)
-#define GPIO7_KP_DKIN_7		MFP_CFG_LPM(GPIO7, AF3, FLOAT)
-#define GPIO8_KP_DKIN_4		MFP_CFG_LPM(GPIO8, AF3, FLOAT)
-#define GPIO9_KP_DKIN_5		MFP_CFG_LPM(GPIO9, AF3, FLOAT)
-#define GPIO10_KP_DKIN_6	MFP_CFG_LPM(GPIO10, AF3, FLOAT)
-#define GPIO11_KP_DKIN_7	MFP_CFG_LPM(GPIO11, AF3, FLOAT)
-
-#define GPIO12_KP_DKIN_0	MFP_CFG_LPM(GPIO12, AF2, FLOAT)
-#define GPIO13_KP_DKIN_1	MFP_CFG_LPM(GPIO13, AF2, FLOAT)
-#define GPIO14_KP_DKIN_2	MFP_CFG_LPM(GPIO14, AF2, FLOAT)
-#define GPIO15_KP_DKIN_3	MFP_CFG_LPM(GPIO15, AF2, FLOAT)
-
-#define GPIO41_KP_DKIN_0	MFP_CFG_LPM(GPIO41, AF2, FLOAT)
-#define GPIO42_KP_DKIN_1	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
-#define GPIO43_KP_DKIN_2	MFP_CFG_LPM(GPIO43, AF2, FLOAT)
-#define GPIO44_KP_DKIN_3	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
-#define GPIO41_KP_DKIN_4	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
-#define GPIO42_KP_DKIN_5	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
-
-#define GPIO0_KP_MKIN_0		MFP_CFG_LPM(GPIO0, AF1, FLOAT)
-#define GPIO2_KP_MKIN_1		MFP_CFG_LPM(GPIO2, AF1, FLOAT)
-#define GPIO4_KP_MKIN_2		MFP_CFG_LPM(GPIO4, AF1, FLOAT)
-#define GPIO6_KP_MKIN_3		MFP_CFG_LPM(GPIO6, AF1, FLOAT)
-#define GPIO8_KP_MKIN_4		MFP_CFG_LPM(GPIO8, AF1, FLOAT)
-#define GPIO10_KP_MKIN_5	MFP_CFG_LPM(GPIO10, AF1, FLOAT)
-#define GPIO12_KP_MKIN_6	MFP_CFG_LPM(GPIO12, AF1, FLOAT)
-#define GPIO14_KP_MKIN_7	MFP_CFG(GPIO14, AF1)
-#define GPIO35_KP_MKIN_5	MFP_CFG(GPIO35, AF4)
-
-#define GPIO1_KP_MKOUT_0	MFP_CFG_LPM(GPIO1, AF1, DRIVE_HIGH)
-#define GPIO3_KP_MKOUT_1	MFP_CFG_LPM(GPIO3, AF1, DRIVE_HIGH)
-#define GPIO5_KP_MKOUT_2	MFP_CFG_LPM(GPIO5, AF1, DRIVE_HIGH)
-#define GPIO7_KP_MKOUT_3	MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH)
-#define GPIO9_KP_MKOUT_4	MFP_CFG_LPM(GPIO9, AF1, DRIVE_HIGH)
-#define GPIO11_KP_MKOUT_5	MFP_CFG_LPM(GPIO11, AF1, DRIVE_HIGH)
-#define GPIO13_KP_MKOUT_6	MFP_CFG_LPM(GPIO13, AF1, DRIVE_HIGH)
-#define GPIO15_KP_MKOUT_7	MFP_CFG_LPM(GPIO15, AF1, DRIVE_HIGH)
-#define GPIO36_KP_MKOUT_5	MFP_CFG_LPM(GPIO36, AF4, DRIVE_HIGH)
-
-/* LCD */
-#define GPIO17_LCD_FCLK_RD	MFP_CFG(GPIO17, AF1)
-#define GPIO18_LCD_LCLK_A0	MFP_CFG(GPIO18, AF1)
-#define GPIO19_LCD_PCLK_WR	MFP_CFG(GPIO19, AF1)
-#define GPIO20_LCD_BIAS		MFP_CFG(GPIO20, AF1)
-#define GPIO21_LCD_CS		MFP_CFG(GPIO21, AF1)
-#define GPIO22_LCD_CS2		MFP_CFG(GPIO22, AF2)
-#define GPIO22_LCD_VSYNC	MFP_CFG(GPIO22, AF1)
-#define GPIO23_LCD_DD0		MFP_CFG(GPIO23, AF1)
-#define GPIO24_LCD_DD1		MFP_CFG(GPIO24, AF1)
-#define GPIO25_LCD_DD2		MFP_CFG(GPIO25, AF1)
-#define GPIO26_LCD_DD3		MFP_CFG(GPIO26, AF1)
-#define GPIO27_LCD_DD4		MFP_CFG(GPIO27, AF1)
-#define GPIO28_LCD_DD5		MFP_CFG(GPIO28, AF1)
-#define GPIO29_LCD_DD6		MFP_CFG(GPIO29, AF1)
-#define GPIO30_LCD_DD7		MFP_CFG(GPIO30, AF1)
-#define GPIO31_LCD_DD8		MFP_CFG(GPIO31, AF1)
-#define GPIO32_LCD_DD9		MFP_CFG(GPIO32, AF1)
-#define GPIO33_LCD_DD10		MFP_CFG(GPIO33, AF1)
-#define GPIO34_LCD_DD11		MFP_CFG(GPIO34, AF1)
-#define GPIO35_LCD_DD12		MFP_CFG(GPIO35, AF1)
-#define GPIO36_LCD_DD13		MFP_CFG(GPIO36, AF1)
-#define GPIO37_LCD_DD14		MFP_CFG(GPIO37, AF1)
-#define GPIO38_LCD_DD15		MFP_CFG(GPIO38, AF1)
-#define GPIO39_LCD_DD16		MFP_CFG(GPIO39, AF1)
-#define GPIO40_LCD_DD17		MFP_CFG(GPIO40, AF1)
-#define GPIO41_LCD_CS2		MFP_CFG(GPIO41, AF3)
-#define GPIO42_LCD_VSYNC2	MFP_CFG(GPIO42, AF3)
-#define GPIO44_LCD_DD7		MFP_CFG(GPIO44, AF1)
-
-/* Mini-LCD */
-#define GPIO17_MLCD_FCLK	MFP_CFG(GPIO17, AF3)
-#define GPIO18_MLCD_LCLK	MFP_CFG(GPIO18, AF3)
-#define GPIO19_MLCD_PCLK	MFP_CFG(GPIO19, AF3)
-#define GPIO20_MLCD_BIAS	MFP_CFG(GPIO20, AF3)
-#define GPIO23_MLCD_DD0		MFP_CFG(GPIO23, AF3)
-#define GPIO24_MLCD_DD1		MFP_CFG(GPIO24, AF3)
-#define GPIO25_MLCD_DD2		MFP_CFG(GPIO25, AF3)
-#define GPIO26_MLCD_DD3		MFP_CFG(GPIO26, AF3)
-#define GPIO27_MLCD_DD4		MFP_CFG(GPIO27, AF3)
-#define GPIO28_MLCD_DD5		MFP_CFG(GPIO28, AF3)
-#define GPIO29_MLCD_DD6		MFP_CFG(GPIO29, AF3)
-#define GPIO30_MLCD_DD7		MFP_CFG(GPIO30, AF3)
-#define GPIO31_MLCD_DD8		MFP_CFG(GPIO31, AF3)
-#define GPIO32_MLCD_DD9		MFP_CFG(GPIO32, AF3)
-#define GPIO33_MLCD_DD10	MFP_CFG(GPIO33, AF3)
-#define GPIO34_MLCD_DD11	MFP_CFG(GPIO34, AF3)
-#define GPIO35_MLCD_DD12	MFP_CFG(GPIO35, AF3)
-#define GPIO36_MLCD_DD13	MFP_CFG(GPIO36, AF3)
-#define GPIO37_MLCD_DD14	MFP_CFG(GPIO37, AF3)
-#define GPIO38_MLCD_DD15	MFP_CFG(GPIO38, AF3)
-#define GPIO44_MLCD_DD7		MFP_CFG(GPIO44, AF5)
-
-/* MMC1 */
-#define GPIO10_MMC1_DAT3	MFP_CFG(GPIO10, AF4)
-#define GPIO11_MMC1_DAT2	MFP_CFG(GPIO11, AF4)
-#define GPIO12_MMC1_DAT1	MFP_CFG(GPIO12, AF4)
-#define GPIO13_MMC1_DAT0	MFP_CFG(GPIO13, AF4)
-#define GPIO14_MMC1_CMD		MFP_CFG(GPIO14, AF4)
-#define GPIO15_MMC1_CLK		MFP_CFG(GPIO15, AF4)
-#define GPIO55_MMC1_CMD		MFP_CFG(GPIO55, AF3)
-#define GPIO56_MMC1_CLK		MFP_CFG(GPIO56, AF3)
-#define GPIO57_MMC1_DAT0	MFP_CFG(GPIO57, AF3)
-#define GPIO58_MMC1_DAT1	MFP_CFG(GPIO58, AF3)
-#define GPIO59_MMC1_DAT2	MFP_CFG(GPIO59, AF3)
-#define GPIO60_MMC1_DAT3	MFP_CFG(GPIO60, AF3)
-
-#define DF_ADDR0_MMC1_CLK	MFP_CFG(DF_ADDR0, AF2)
-#define DF_ADDR1_MMC1_CMD	MFP_CFG(DF_ADDR1, AF2)
-#define DF_ADDR2_MMC1_DAT0	MFP_CFG(DF_ADDR2, AF2)
-#define DF_ADDR3_MMC1_DAT1	MFP_CFG(DF_ADDR3, AF3)
-#define nXCVREN_MMC1_DAT2	MFP_CFG(nXCVREN, AF2)
-
-/* MMC2 */
-#define GPIO31_MMC2_CMD		MFP_CFG(GPIO31, AF7)
-#define GPIO32_MMC2_CLK		MFP_CFG(GPIO32, AF7)
-#define GPIO33_MMC2_DAT0	MFP_CFG(GPIO33, AF7)
-#define GPIO34_MMC2_DAT1	MFP_CFG(GPIO34, AF7)
-#define GPIO35_MMC2_DAT2	MFP_CFG(GPIO35, AF7)
-#define GPIO36_MMC2_DAT3	MFP_CFG(GPIO36, AF7)
-
-#define GPIO101_MMC2_DAT3	MFP_CFG(GPIO101, AF1)
-#define GPIO102_MMC2_DAT2	MFP_CFG(GPIO102, AF1)
-#define GPIO103_MMC2_DAT1	MFP_CFG(GPIO103, AF1)
-#define GPIO104_MMC2_DAT0	MFP_CFG(GPIO104, AF1)
-#define GPIO105_MMC2_CMD	MFP_CFG(GPIO105, AF1)
-#define GPIO106_MMC2_CLK	MFP_CFG(GPIO106, AF1)
-
-#define DF_IO10_MMC2_DAT3	MFP_CFG(DF_IO10, AF3)
-#define DF_IO11_MMC2_DAT2	MFP_CFG(DF_IO11, AF3)
-#define DF_IO12_MMC2_DAT1	MFP_CFG(DF_IO12, AF3)
-#define DF_IO13_MMC2_DAT0	MFP_CFG(DF_IO13, AF3)
-#define DF_IO14_MMC2_CLK	MFP_CFG(DF_IO14, AF3)
-#define DF_IO15_MMC2_CMD	MFP_CFG(DF_IO15, AF3)
-
-/* BSSP1 */
-#define GPIO12_BSSP1_CLK	MFP_CFG(GPIO12, AF3)
-#define GPIO13_BSSP1_FRM	MFP_CFG(GPIO13, AF3)
-#define GPIO14_BSSP1_RXD	MFP_CFG(GPIO14, AF3)
-#define GPIO15_BSSP1_TXD	MFP_CFG(GPIO15, AF3)
-#define GPIO97_BSSP1_CLK	MFP_CFG(GPIO97, AF5)
-#define GPIO98_BSSP1_FRM	MFP_CFG(GPIO98, AF5)
-
-/* BSSP2 */
-#define GPIO84_BSSP2_SDATA_IN	MFP_CFG(GPIO84, AF1)
-#define GPIO85_BSSP2_BITCLK	MFP_CFG(GPIO85, AF1)
-#define GPIO86_BSSP2_SYSCLK	MFP_CFG(GPIO86, AF1)
-#define GPIO87_BSSP2_SYNC	MFP_CFG(GPIO87, AF1)
-#define GPIO88_BSSP2_DATA_OUT	MFP_CFG(GPIO88, AF1)
-#define GPIO86_BSSP2_SDATA_IN	MFP_CFG(GPIO86, AF4)
-
-/* BSSP3 */
-#define GPIO79_BSSP3_CLK	MFP_CFG(GPIO79, AF1)
-#define GPIO80_BSSP3_FRM	MFP_CFG(GPIO80, AF1)
-#define GPIO81_BSSP3_TXD	MFP_CFG(GPIO81, AF1)
-#define GPIO82_BSSP3_RXD	MFP_CFG(GPIO82, AF1)
-#define GPIO83_BSSP3_SYSCLK	MFP_CFG(GPIO83, AF1)
-
-/* BSSP4 */
-#define GPIO43_BSSP4_CLK	MFP_CFG(GPIO43, AF4)
-#define GPIO44_BSSP4_FRM	MFP_CFG(GPIO44, AF4)
-#define GPIO45_BSSP4_TXD	MFP_CFG(GPIO45, AF4)
-#define GPIO46_BSSP4_RXD	MFP_CFG(GPIO46, AF4)
-
-#define GPIO51_BSSP4_CLK	MFP_CFG(GPIO51, AF4)
-#define GPIO52_BSSP4_FRM	MFP_CFG(GPIO52, AF4)
-#define GPIO53_BSSP4_TXD	MFP_CFG(GPIO53, AF4)
-#define GPIO54_BSSP4_RXD	MFP_CFG(GPIO54, AF4)
-
-/* GSSP1 */
-#define GPIO79_GSSP1_CLK	MFP_CFG(GPIO79, AF2)
-#define GPIO80_GSSP1_FRM	MFP_CFG(GPIO80, AF2)
-#define GPIO81_GSSP1_TXD	MFP_CFG(GPIO81, AF2)
-#define GPIO82_GSSP1_RXD	MFP_CFG(GPIO82, AF2)
-#define GPIO83_GSSP1_SYSCLK	MFP_CFG(GPIO83, AF2)
-
-#define GPIO93_GSSP1_CLK	MFP_CFG(GPIO93, AF4)
-#define GPIO94_GSSP1_FRM	MFP_CFG(GPIO94, AF4)
-#define GPIO95_GSSP1_TXD	MFP_CFG(GPIO95, AF4)
-#define GPIO96_GSSP1_RXD	MFP_CFG(GPIO96, AF4)
-
-/* GSSP2 */
-#define GPIO47_GSSP2_CLK	MFP_CFG(GPIO47, AF4)
-#define GPIO48_GSSP2_FRM	MFP_CFG(GPIO48, AF4)
-#define GPIO49_GSSP2_RXD	MFP_CFG(GPIO49, AF4)
-#define GPIO50_GSSP2_TXD	MFP_CFG(GPIO50, AF4)
-
-#define GPIO69_GSSP2_CLK	MFP_CFG(GPIO69, AF4)
-#define GPIO70_GSSP2_FRM	MFP_CFG(GPIO70, AF4)
-#define GPIO71_GSSP2_RXD	MFP_CFG(GPIO71, AF4)
-#define GPIO72_GSSP2_TXD	MFP_CFG(GPIO72, AF4)
-
-#define GPIO84_GSSP2_RXD	MFP_CFG(GPIO84, AF2)
-#define GPIO85_GSSP2_CLK	MFP_CFG(GPIO85, AF2)
-#define GPIO86_GSSP2_SYSCLK	MFP_CFG(GPIO86, AF2)
-#define GPIO87_GSSP2_FRM	MFP_CFG(GPIO87, AF2)
-#define GPIO88_GSSP2_TXD	MFP_CFG(GPIO88, AF2)
-#define GPIO86_GSSP2_RXD	MFP_CFG(GPIO86, AF5)
-
-#define GPIO103_GSSP2_CLK	MFP_CFG(GPIO103, AF2)
-#define GPIO104_GSSP2_FRM	MFP_CFG(GPIO104, AF2)
-#define GPIO105_GSSP2_RXD	MFP_CFG(GPIO105, AF2)
-#define GPIO106_GSSP2_TXD	MFP_CFG(GPIO106, AF2)
-
-/* UART1 - FFUART */
-#define GPIO47_UART1_DSR_N	MFP_CFG(GPIO47, AF1)
-#define GPIO48_UART1_DTR_N	MFP_CFG(GPIO48, AF1)
-#define GPIO49_UART1_RI		MFP_CFG(GPIO49, AF1)
-#define GPIO50_UART1_DCD	MFP_CFG(GPIO50, AF1)
-#define GPIO51_UART1_CTS	MFP_CFG(GPIO51, AF1)
-#define GPIO52_UART1_RTS	MFP_CFG(GPIO52, AF1)
-#define GPIO53_UART1_RXD	MFP_CFG(GPIO53, AF1)
-#define GPIO54_UART1_TXD	MFP_CFG(GPIO54, AF1)
-
-#define GPIO63_UART1_TXD	MFP_CFG(GPIO63, AF2)
-#define GPIO64_UART1_RXD	MFP_CFG(GPIO64, AF2)
-#define GPIO65_UART1_DSR	MFP_CFG(GPIO65, AF2)
-#define GPIO66_UART1_DTR	MFP_CFG(GPIO66, AF2)
-#define GPIO67_UART1_RI		MFP_CFG(GPIO67, AF2)
-#define GPIO68_UART1_DCD	MFP_CFG(GPIO68, AF2)
-#define GPIO69_UART1_CTS	MFP_CFG(GPIO69, AF2)
-#define GPIO70_UART1_RTS	MFP_CFG(GPIO70, AF2)
-
-/* UART2 - BTUART */
-#define GPIO91_UART2_RXD	MFP_CFG(GPIO91, AF1)
-#define GPIO92_UART2_TXD	MFP_CFG(GPIO92, AF1)
-#define GPIO93_UART2_CTS	MFP_CFG(GPIO93, AF1)
-#define GPIO94_UART2_RTS	MFP_CFG(GPIO94, AF1)
-
-/* UART3 - STUART */
-#define GPIO43_UART3_RTS	MFP_CFG(GPIO43, AF3)
-#define GPIO44_UART3_CTS	MFP_CFG(GPIO44, AF3)
-#define GPIO45_UART3_RXD	MFP_CFG(GPIO45, AF3)
-#define GPIO46_UART3_TXD	MFP_CFG(GPIO46, AF3)
-
-#define GPIO75_UART3_RTS	MFP_CFG(GPIO75, AF5)
-#define GPIO76_UART3_CTS	MFP_CFG(GPIO76, AF5)
-#define GPIO77_UART3_TXD	MFP_CFG(GPIO77, AF5)
-#define GPIO78_UART3_RXD	MFP_CFG(GPIO78, AF5)
-
-/* DFI */
-#define DF_IO0_DF_IO0		MFP_CFG(DF_IO0, AF2)
-#define DF_IO1_DF_IO1		MFP_CFG(DF_IO1, AF2)
-#define DF_IO2_DF_IO2		MFP_CFG(DF_IO2, AF2)
-#define DF_IO3_DF_IO3		MFP_CFG(DF_IO3, AF2)
-#define DF_IO4_DF_IO4		MFP_CFG(DF_IO4, AF2)
-#define DF_IO5_DF_IO5		MFP_CFG(DF_IO5, AF2)
-#define DF_IO6_DF_IO6		MFP_CFG(DF_IO6, AF2)
-#define DF_IO7_DF_IO7		MFP_CFG(DF_IO7, AF2)
-#define DF_IO8_DF_IO8		MFP_CFG(DF_IO8, AF2)
-#define DF_IO9_DF_IO9		MFP_CFG(DF_IO9, AF2)
-#define DF_IO10_DF_IO10		MFP_CFG(DF_IO10, AF2)
-#define DF_IO11_DF_IO11		MFP_CFG(DF_IO11, AF2)
-#define DF_IO12_DF_IO12		MFP_CFG(DF_IO12, AF2)
-#define DF_IO13_DF_IO13		MFP_CFG(DF_IO13, AF2)
-#define DF_IO14_DF_IO14		MFP_CFG(DF_IO14, AF2)
-#define DF_IO15_DF_IO15		MFP_CFG(DF_IO15, AF2)
-#define DF_nADV1_ALE_DF_nADV1	MFP_CFG(DF_nADV1_ALE, AF2)
-#define DF_nADV2_ALE_DF_nADV2	MFP_CFG(DF_nADV2_ALE, AF2)
-#define DF_nCS0_DF_nCS0		MFP_CFG(DF_nCS0, AF2)
-#define DF_nCS1_DF_nCS1		MFP_CFG(DF_nCS1, AF2)
-#define DF_nRE_nOE_DF_nOE	MFP_CFG(DF_nRE_nOE, AF2)
-#define DF_nWE_DF_nWE		MFP_CFG(DF_nWE, AF2)
-
-/* DFI - NAND */
-#define DF_CLE_nOE_ND_CLE	MFP_CFG_LPM(DF_CLE_nOE, AF1, PULL_HIGH)
-#define DF_INT_RnB_ND_INT_RnB	MFP_CFG_LPM(DF_INT_RnB, AF1, PULL_LOW)
-#define DF_IO0_ND_IO0		MFP_CFG_LPM(DF_IO0, AF1, PULL_LOW)
-#define DF_IO1_ND_IO1		MFP_CFG_LPM(DF_IO1, AF1, PULL_LOW)
-#define DF_IO2_ND_IO2		MFP_CFG_LPM(DF_IO2, AF1, PULL_LOW)
-#define DF_IO3_ND_IO3		MFP_CFG_LPM(DF_IO3, AF1, PULL_LOW)
-#define DF_IO4_ND_IO4		MFP_CFG_LPM(DF_IO4, AF1, PULL_LOW)
-#define DF_IO5_ND_IO5		MFP_CFG_LPM(DF_IO5, AF1, PULL_LOW)
-#define DF_IO6_ND_IO6		MFP_CFG_LPM(DF_IO6, AF1, PULL_LOW)
-#define DF_IO7_ND_IO7		MFP_CFG_LPM(DF_IO7, AF1, PULL_LOW)
-#define DF_IO8_ND_IO8		MFP_CFG_LPM(DF_IO8, AF1, PULL_LOW)
-#define DF_IO9_ND_IO9		MFP_CFG_LPM(DF_IO9, AF1, PULL_LOW)
-#define DF_IO10_ND_IO10		MFP_CFG_LPM(DF_IO10, AF1, PULL_LOW)
-#define DF_IO11_ND_IO11		MFP_CFG_LPM(DF_IO11, AF1, PULL_LOW)
-#define DF_IO12_ND_IO12		MFP_CFG_LPM(DF_IO12, AF1, PULL_LOW)
-#define DF_IO13_ND_IO13		MFP_CFG_LPM(DF_IO13, AF1, PULL_LOW)
-#define DF_IO14_ND_IO14		MFP_CFG_LPM(DF_IO14, AF1, PULL_LOW)
-#define DF_IO15_ND_IO15		MFP_CFG_LPM(DF_IO15, AF1, PULL_LOW)
-#define DF_nADV1_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV1_ALE, AF1, PULL_HIGH)
-#define DF_nADV2_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV2_ALE, AF1, PULL_HIGH)
-#define	DF_nADV2_ALE_nCS3	MFP_CFG_LPM(DF_nADV2_ALE, AF3, PULL_HIGH)
-#define DF_nCS0_ND_nCS0		MFP_CFG_LPM(DF_nCS0, AF1, PULL_HIGH)
-#define DF_nCS1_ND_nCS1		MFP_CFG_LPM(DF_nCS1, AF1, PULL_HIGH)
-#define DF_nRE_nOE_ND_nRE	MFP_CFG_LPM(DF_nRE_nOE, AF1, PULL_HIGH)
-#define DF_nWE_ND_nWE		MFP_CFG_LPM(DF_nWE, AF1, PULL_HIGH)
-
-/* PWM */
-#define GPIO41_PWM0		MFP_CFG_LPM(GPIO41, AF1, PULL_LOW)
-#define GPIO42_PWM1		MFP_CFG_LPM(GPIO42, AF1, PULL_LOW)
-#define GPIO43_PWM3		MFP_CFG_LPM(GPIO43, AF1, PULL_LOW)
-#define GPIO20_PWM0		MFP_CFG_LPM(GPIO20, AF2, PULL_LOW)
-#define GPIO21_PWM2		MFP_CFG_LPM(GPIO21, AF3, PULL_LOW)
-#define GPIO22_PWM3		MFP_CFG_LPM(GPIO22, AF3, PULL_LOW)
-
-/* CIR */
-#define GPIO46_CIR_OUT		MFP_CFG(GPIO46, AF1)
-#define GPIO77_CIR_OUT		MFP_CFG(GPIO77, AF3)
-
-/* USB P2 */
-#define GPIO0_USB_P2_7		MFP_CFG(GPIO0, AF3)
-#define GPIO15_USB_P2_7		MFP_CFG(GPIO15, AF5)
-#define GPIO16_USB_P2_7		MFP_CFG(GPIO16, AF2)
-#define GPIO48_USB_P2_7		MFP_CFG(GPIO48, AF7)
-#define GPIO49_USB_P2_7		MFP_CFG(GPIO49, AF6)
-#define DF_IO9_USB_P2_7		MFP_CFG(DF_IO9, AF3)
-
-#define GPIO48_USB_P2_8		MFP_CFG(GPIO48, AF2)
-#define GPIO50_USB_P2_7		MFP_CFG_X(GPIO50, AF2, DS02X, FLOAT)
-#define GPIO51_USB_P2_5		MFP_CFG(GPIO51, AF2)
-#define GPIO47_USB_P2_4		MFP_CFG(GPIO47, AF2)
-#define GPIO53_USB_P2_3		MFP_CFG(GPIO53, AF2)
-#define GPIO54_USB_P2_6		MFP_CFG(GPIO54, AF2)
-#define GPIO49_USB_P2_2		MFP_CFG(GPIO49, AF2)
-#define GPIO52_USB_P2_1		MFP_CFG(GPIO52, AF2)
-
-#define GPIO63_USB_P2_8		MFP_CFG(GPIO63, AF3)
-#define GPIO64_USB_P2_7		MFP_CFG(GPIO64, AF3)
-#define GPIO65_USB_P2_6		MFP_CFG(GPIO65, AF3)
-#define GPIO66_USG_P2_5		MFP_CFG(GPIO66, AF3)
-#define GPIO67_USB_P2_4		MFP_CFG(GPIO67, AF3)
-#define GPIO68_USB_P2_3		MFP_CFG(GPIO68, AF3)
-#define GPIO69_USB_P2_2		MFP_CFG(GPIO69, AF3)
-#define GPIO70_USB_P2_1		MFP_CFG(GPIO70, AF3)
-
-/* ULPI */
-#define GPIO31_USB_ULPI_D0	MFP_CFG(GPIO31, AF4)
-#define GPIO30_USB_ULPI_D1	MFP_CFG(GPIO30, AF7)
-#define GPIO33_USB_ULPI_D2	MFP_CFG(GPIO33, AF5)
-#define GPIO34_USB_ULPI_D3	MFP_CFG(GPIO34, AF5)
-#define GPIO35_USB_ULPI_D4	MFP_CFG(GPIO35, AF5)
-#define GPIO36_USB_ULPI_D5	MFP_CFG(GPIO36, AF5)
-#define GPIO41_USB_ULPI_D6	MFP_CFG(GPIO41, AF5)
-#define GPIO42_USB_ULPI_D7	MFP_CFG(GPIO42, AF5)
-#define GPIO37_USB_ULPI_DIR	MFP_CFG(GPIO37, AF4)
-#define GPIO38_USB_ULPI_CLK	MFP_CFG(GPIO38, AF4)
-#define GPIO39_USB_ULPI_STP	MFP_CFG(GPIO39, AF4)
-#define GPIO40_USB_ULPI_NXT	MFP_CFG(GPIO40, AF4)
-
-#define GPIO3_CLK26MOUTDMD	MFP_CFG(GPIO3, AF3)
-#define GPIO40_CLK26MOUTDMD	MFP_CFG(GPIO40, AF7)
-#define GPIO94_CLK26MOUTDMD	MFP_CFG(GPIO94, AF5)
-#define GPIO104_CLK26MOUTDMD	MFP_CFG(GPIO104, AF4)
-#define DF_ADDR1_CLK26MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
-#define DF_ADDR3_CLK26MOUTDMD	MFP_CFG(DF_ADDR3, AF3)
-
-#define GPIO14_CLK26MOUT	MFP_CFG(GPIO14, AF5)
-#define GPIO38_CLK26MOUT	MFP_CFG(GPIO38, AF7)
-#define GPIO92_CLK26MOUT	MFP_CFG(GPIO92, AF5)
-#define GPIO105_CLK26MOUT	MFP_CFG(GPIO105, AF4)
-
-#define GPIO2_CLK13MOUTDMD	MFP_CFG(GPIO2, AF3)
-#define GPIO39_CLK13MOUTDMD	MFP_CFG(GPIO39, AF7)
-#define GPIO50_CLK13MOUTDMD	MFP_CFG(GPIO50, AF3)
-#define GPIO93_CLK13MOUTDMD	MFP_CFG(GPIO93, AF5)
-#define GPIO103_CLK13MOUTDMD	MFP_CFG(GPIO103, AF4)
-#define DF_ADDR2_CLK13MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
-
-/* 1 wire */
-#define GPIO95_OW_DQ_IN		MFP_CFG(GPIO95, AF5)
-
-#endif /* __ASM_ARCH_MFP_PXA9xx_H */
diff --git a/include/asm-arm/arch-pxa/mfp.h b/include/asm-arm/arch-pxa/mfp.h
deleted file mode 100644
index e7d5879..0000000
--- a/include/asm-arm/arch-pxa/mfp.h
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/mfp.h
- *
- * Multi-Function Pin Definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- *
- * 2007-8-21: eric miao <eric.miao@marvell.com>
- *            initial version
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MFP_H
-#define __ASM_ARCH_MFP_H
-
-#define mfp_to_gpio(m)	((m) % 128)
-
-/* list of all the configurable MFP pins */
-enum {
-	MFP_PIN_INVALID = -1,
-
-	MFP_PIN_GPIO0 = 0,
-	MFP_PIN_GPIO1,
-	MFP_PIN_GPIO2,
-	MFP_PIN_GPIO3,
-	MFP_PIN_GPIO4,
-	MFP_PIN_GPIO5,
-	MFP_PIN_GPIO6,
-	MFP_PIN_GPIO7,
-	MFP_PIN_GPIO8,
-	MFP_PIN_GPIO9,
-	MFP_PIN_GPIO10,
-	MFP_PIN_GPIO11,
-	MFP_PIN_GPIO12,
-	MFP_PIN_GPIO13,
-	MFP_PIN_GPIO14,
-	MFP_PIN_GPIO15,
-	MFP_PIN_GPIO16,
-	MFP_PIN_GPIO17,
-	MFP_PIN_GPIO18,
-	MFP_PIN_GPIO19,
-	MFP_PIN_GPIO20,
-	MFP_PIN_GPIO21,
-	MFP_PIN_GPIO22,
-	MFP_PIN_GPIO23,
-	MFP_PIN_GPIO24,
-	MFP_PIN_GPIO25,
-	MFP_PIN_GPIO26,
-	MFP_PIN_GPIO27,
-	MFP_PIN_GPIO28,
-	MFP_PIN_GPIO29,
-	MFP_PIN_GPIO30,
-	MFP_PIN_GPIO31,
-	MFP_PIN_GPIO32,
-	MFP_PIN_GPIO33,
-	MFP_PIN_GPIO34,
-	MFP_PIN_GPIO35,
-	MFP_PIN_GPIO36,
-	MFP_PIN_GPIO37,
-	MFP_PIN_GPIO38,
-	MFP_PIN_GPIO39,
-	MFP_PIN_GPIO40,
-	MFP_PIN_GPIO41,
-	MFP_PIN_GPIO42,
-	MFP_PIN_GPIO43,
-	MFP_PIN_GPIO44,
-	MFP_PIN_GPIO45,
-	MFP_PIN_GPIO46,
-	MFP_PIN_GPIO47,
-	MFP_PIN_GPIO48,
-	MFP_PIN_GPIO49,
-	MFP_PIN_GPIO50,
-	MFP_PIN_GPIO51,
-	MFP_PIN_GPIO52,
-	MFP_PIN_GPIO53,
-	MFP_PIN_GPIO54,
-	MFP_PIN_GPIO55,
-	MFP_PIN_GPIO56,
-	MFP_PIN_GPIO57,
-	MFP_PIN_GPIO58,
-	MFP_PIN_GPIO59,
-	MFP_PIN_GPIO60,
-	MFP_PIN_GPIO61,
-	MFP_PIN_GPIO62,
-	MFP_PIN_GPIO63,
-	MFP_PIN_GPIO64,
-	MFP_PIN_GPIO65,
-	MFP_PIN_GPIO66,
-	MFP_PIN_GPIO67,
-	MFP_PIN_GPIO68,
-	MFP_PIN_GPIO69,
-	MFP_PIN_GPIO70,
-	MFP_PIN_GPIO71,
-	MFP_PIN_GPIO72,
-	MFP_PIN_GPIO73,
-	MFP_PIN_GPIO74,
-	MFP_PIN_GPIO75,
-	MFP_PIN_GPIO76,
-	MFP_PIN_GPIO77,
-	MFP_PIN_GPIO78,
-	MFP_PIN_GPIO79,
-	MFP_PIN_GPIO80,
-	MFP_PIN_GPIO81,
-	MFP_PIN_GPIO82,
-	MFP_PIN_GPIO83,
-	MFP_PIN_GPIO84,
-	MFP_PIN_GPIO85,
-	MFP_PIN_GPIO86,
-	MFP_PIN_GPIO87,
-	MFP_PIN_GPIO88,
-	MFP_PIN_GPIO89,
-	MFP_PIN_GPIO90,
-	MFP_PIN_GPIO91,
-	MFP_PIN_GPIO92,
-	MFP_PIN_GPIO93,
-	MFP_PIN_GPIO94,
-	MFP_PIN_GPIO95,
-	MFP_PIN_GPIO96,
-	MFP_PIN_GPIO97,
-	MFP_PIN_GPIO98,
-	MFP_PIN_GPIO99,
-	MFP_PIN_GPIO100,
-	MFP_PIN_GPIO101,
-	MFP_PIN_GPIO102,
-	MFP_PIN_GPIO103,
-	MFP_PIN_GPIO104,
-	MFP_PIN_GPIO105,
-	MFP_PIN_GPIO106,
-	MFP_PIN_GPIO107,
-	MFP_PIN_GPIO108,
-	MFP_PIN_GPIO109,
-	MFP_PIN_GPIO110,
-	MFP_PIN_GPIO111,
-	MFP_PIN_GPIO112,
-	MFP_PIN_GPIO113,
-	MFP_PIN_GPIO114,
-	MFP_PIN_GPIO115,
-	MFP_PIN_GPIO116,
-	MFP_PIN_GPIO117,
-	MFP_PIN_GPIO118,
-	MFP_PIN_GPIO119,
-	MFP_PIN_GPIO120,
-	MFP_PIN_GPIO121,
-	MFP_PIN_GPIO122,
-	MFP_PIN_GPIO123,
-	MFP_PIN_GPIO124,
-	MFP_PIN_GPIO125,
-	MFP_PIN_GPIO126,
-	MFP_PIN_GPIO127,
-	MFP_PIN_GPIO0_2,
-	MFP_PIN_GPIO1_2,
-	MFP_PIN_GPIO2_2,
-	MFP_PIN_GPIO3_2,
-	MFP_PIN_GPIO4_2,
-	MFP_PIN_GPIO5_2,
-	MFP_PIN_GPIO6_2,
-	MFP_PIN_GPIO7_2,
-	MFP_PIN_GPIO8_2,
-	MFP_PIN_GPIO9_2,
-	MFP_PIN_GPIO10_2,
-	MFP_PIN_GPIO11_2,
-	MFP_PIN_GPIO12_2,
-	MFP_PIN_GPIO13_2,
-	MFP_PIN_GPIO14_2,
-	MFP_PIN_GPIO15_2,
-	MFP_PIN_GPIO16_2,
-	MFP_PIN_GPIO17_2,
-
-	MFP_PIN_ULPI_STP,
-	MFP_PIN_ULPI_NXT,
-	MFP_PIN_ULPI_DIR,
-
-	MFP_PIN_nXCVREN,
-	MFP_PIN_DF_CLE_nOE,
-	MFP_PIN_DF_nADV1_ALE,
-	MFP_PIN_DF_SCLK_E,
-	MFP_PIN_DF_SCLK_S,
-	MFP_PIN_nBE0,
-	MFP_PIN_nBE1,
-	MFP_PIN_DF_nADV2_ALE,
-	MFP_PIN_DF_INT_RnB,
-	MFP_PIN_DF_nCS0,
-	MFP_PIN_DF_nCS1,
-	MFP_PIN_nLUA,
-	MFP_PIN_nLLA,
-	MFP_PIN_DF_nWE,
-	MFP_PIN_DF_ALE_nWE,
-	MFP_PIN_DF_nRE_nOE,
-	MFP_PIN_DF_ADDR0,
-	MFP_PIN_DF_ADDR1,
-	MFP_PIN_DF_ADDR2,
-	MFP_PIN_DF_ADDR3,
-	MFP_PIN_DF_IO0,
-	MFP_PIN_DF_IO1,
-	MFP_PIN_DF_IO2,
-	MFP_PIN_DF_IO3,
-	MFP_PIN_DF_IO4,
-	MFP_PIN_DF_IO5,
-	MFP_PIN_DF_IO6,
-	MFP_PIN_DF_IO7,
-	MFP_PIN_DF_IO8,
-	MFP_PIN_DF_IO9,
-	MFP_PIN_DF_IO10,
-	MFP_PIN_DF_IO11,
-	MFP_PIN_DF_IO12,
-	MFP_PIN_DF_IO13,
-	MFP_PIN_DF_IO14,
-	MFP_PIN_DF_IO15,
-
-	/* additional pins on PXA930 */
-	MFP_PIN_GSIM_UIO,
-	MFP_PIN_GSIM_UCLK,
-	MFP_PIN_GSIM_UDET,
-	MFP_PIN_GSIM_nURST,
-	MFP_PIN_PMIC_INT,
-	MFP_PIN_RDY,
-
-	MFP_PIN_MAX,
-};
-
-/*
- * a possible MFP configuration is represented by a 32-bit integer
- *
- * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
- * bit 10..12 - Alternate Function Selection
- * bit 13..15 - Drive Strength
- * bit 16..18 - Low Power Mode State
- * bit 19..20 - Low Power Mode Edge Detection
- * bit 21..22 - Run Mode Pull State
- *
- * to facilitate the definition, the following macros are provided
- *
- * MFP_CFG_DEFAULT - default MFP configuration value, with
- * 		  alternate function = 0,
- * 		  drive strength = fast 3mA (MFP_DS03X)
- * 		  low power mode = default
- * 		  edge detection = none
- *
- * MFP_CFG	- default MFPR value with alternate function
- * MFP_CFG_DRV	- default MFPR value with alternate function and
- * 		  pin drive strength
- * MFP_CFG_LPM	- default MFPR value with alternate function and
- * 		  low power mode
- * MFP_CFG_X	- default MFPR value with alternate function,
- * 		  pin drive strength and low power mode
- */
-
-typedef unsigned long mfp_cfg_t;
-
-#define MFP_PIN(x)		((x) & 0x3ff)
-
-#define MFP_AF0			(0x0 << 10)
-#define MFP_AF1			(0x1 << 10)
-#define MFP_AF2			(0x2 << 10)
-#define MFP_AF3			(0x3 << 10)
-#define MFP_AF4			(0x4 << 10)
-#define MFP_AF5			(0x5 << 10)
-#define MFP_AF6			(0x6 << 10)
-#define MFP_AF7			(0x7 << 10)
-#define MFP_AF_MASK		(0x7 << 10)
-#define MFP_AF(x)		(((x) >> 10) & 0x7)
-
-#define MFP_DS01X		(0x0 << 13)
-#define MFP_DS02X		(0x1 << 13)
-#define MFP_DS03X		(0x2 << 13)
-#define MFP_DS04X		(0x3 << 13)
-#define MFP_DS06X		(0x4 << 13)
-#define MFP_DS08X		(0x5 << 13)
-#define MFP_DS10X		(0x6 << 13)
-#define MFP_DS13X		(0x7 << 13)
-#define MFP_DS_MASK		(0x7 << 13)
-#define MFP_DS(x)		(((x) >> 13) & 0x7)
-
-#define MFP_LPM_INPUT		(0x0 << 16)
-#define MFP_LPM_DRIVE_LOW	(0x1 << 16)
-#define MFP_LPM_DRIVE_HIGH	(0x2 << 16)
-#define MFP_LPM_PULL_LOW	(0x3 << 16)
-#define MFP_LPM_PULL_HIGH	(0x4 << 16)
-#define MFP_LPM_FLOAT		(0x5 << 16)
-#define MFP_LPM_STATE_MASK	(0x7 << 16)
-#define MFP_LPM_STATE(x)	(((x) >> 16) & 0x7)
-
-#define MFP_LPM_EDGE_NONE	(0x0 << 19)
-#define MFP_LPM_EDGE_RISE	(0x1 << 19)
-#define MFP_LPM_EDGE_FALL	(0x2 << 19)
-#define MFP_LPM_EDGE_BOTH	(0x3 << 19)
-#define MFP_LPM_EDGE_MASK	(0x3 << 19)
-#define MFP_LPM_EDGE(x)		(((x) >> 19) & 0x3)
-
-#define MFP_PULL_NONE		(0x0 << 21)
-#define MFP_PULL_LOW		(0x1 << 21)
-#define MFP_PULL_HIGH		(0x2 << 21)
-#define MFP_PULL_BOTH		(0x3 << 21)
-#define MFP_PULL_MASK		(0x3 << 21)
-#define MFP_PULL(x)		(((x) >> 21) & 0x3)
-
-#define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_INPUT |\
-				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
-
-#define MFP_CFG(pin, af)		\
-	((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
-
-#define MFP_CFG_DRV(pin, af, drv)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
-
-#define MFP_CFG_LPM(pin, af, lpm)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
-
-#define MFP_CFG_X(pin, af, drv, lpm)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
-
-#endif /* __ASM_ARCH_MFP_H */
diff --git a/include/asm-arm/arch-pxa/mtd-xip.h b/include/asm-arm/arch-pxa/mtd-xip.h
deleted file mode 100644
index 8704dbc..0000000
--- a/include/asm-arm/arch-pxa/mtd-xip.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- * 
- * Author:	Nicolas Pitre
- * Created:	Nov 2, 2004
- * Copyright:	(C) 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
- */
-
-#ifndef __ARCH_PXA_MTD_XIP_H__
-#define __ARCH_PXA_MTD_XIP_H__
-
-#include <asm/arch/pxa-regs.h>
-
-#define xip_irqpending()	(ICIP & ICMR)
-
-/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
-#define xip_currtime()		(OSCR)
-#define xip_elapsed_since(x)	(signed)((OSCR - (x)) / 4)
-
-/*
- * xip_cpu_idle() is used when waiting for a delay equal or larger than
- * the system timer tick period.  This should put the CPU into idle mode
- * to save power and to be woken up only when some interrupts are pending.
- * As above, this should not rely upon standard kernel code.
- */
-
-#define xip_cpu_idle()  asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1))
-
-#endif /* __ARCH_PXA_MTD_XIP_H__ */
diff --git a/include/asm-arm/arch-pxa/pcm027.h b/include/asm-arm/arch-pxa/pcm027.h
deleted file mode 100644
index 7beae1472..0000000
--- a/include/asm-arm/arch-pxa/pcm027.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/pcm027.h
- *
- * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
- * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * Definitions of CPU card resources only
- */
-
-/* I2C RTC */
-#define PCM027_RTC_IRQ_GPIO	0
-#define PCM027_RTC_IRQ		IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
-#define PCM027_RTC_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-#define ADR_PCM027_RTC		0x51	/* I2C address */
-
-/* I2C EEPROM */
-#define ADR_PCM027_EEPROM	0x54	/* I2C address */
-
-/* Ethernet chip (SMSC91C111) */
-#define PCM027_ETH_IRQ_GPIO	52
-#define PCM027_ETH_IRQ		IRQ_GPIO(PCM027_ETH_IRQ_GPIO)
-#define PCM027_ETH_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-#define PCM027_ETH_PHYS		PXA_CS5_PHYS
-#define PCM027_ETH_SIZE		(1*1024*1024)
-
-/* CAN controller SJA1000 (unsupported yet) */
-#define PCM027_CAN_IRQ_GPIO	114
-#define PCM027_CAN_IRQ		IRQ_GPIO(PCM027_CAN_IRQ_GPIO)
-#define PCM027_CAN_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-#define PCM027_CAN_PHYS		0x22000000
-#define PCM027_CAN_SIZE		0x100
-
-/* SPI GPIO expander (unsupported yet) */
-#define PCM027_EGPIO_IRQ_GPIO	27
-#define PCM027_EGPIO_IRQ	IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO)
-#define PCM027_EGPIO_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-#define PCM027_EGPIO_CS		24
-/*
- * TODO: Switch this pin from dedicated usage to GPIO if
- * more than the MAX7301 device is connected to this SPI bus
- */
-#define PCM027_EGPIO_CS_MODE	GPIO24_SFRM_MD
-
-/* Flash memory */
-#define PCM027_FLASH_PHYS	0x00000000
-#define PCM027_FLASH_SIZE	0x02000000
-
-/* onboard LEDs connected to GPIO */
-#define PCM027_LED_CPU		90
-#define PCM027_LED_HEARD_BEAT	91
-
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
- * TODO: Add your own basebaord init function and call it from
- * inside pcm027_init(). This example here is for the developmen board.
- * Refer pcm990-baseboard.c
- */
-extern void pcm990_baseboard_init(void);
diff --git a/include/asm-arm/arch-pxa/pcm990_baseboard.h b/include/asm-arm/arch-pxa/pcm990_baseboard.h
deleted file mode 100644
index 2e20131..0000000
--- a/include/asm-arm/arch-pxa/pcm990_baseboard.h
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- * include/asm-arm/arch-pxa/pcm990_baseboard.h
- *
- * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
- * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <asm/arch/pcm027.h>
-
-/*
- * definitions relevant only when the PCM-990
- * development base board is in use
- */
-
-/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
-#define PCM990_CTRL_INT_IRQ_GPIO	9
-#define PCM990_CTRL_INT_IRQ		IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO)
-#define PCM990_CTRL_INT_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-#define PCM990_CTRL_PHYS		PXA_CS1_PHYS	/* 16-Bit */
-#define PCM990_CTRL_BASE		0xea000000
-#define PCM990_CTRL_SIZE		(1*1024*1024)
-
-#define PCM990_CTRL_PWR_IRQ_GPIO	14
-#define PCM990_CTRL_PWR_IRQ		IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO)
-#define PCM990_CTRL_PWR_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-
-/* visible CPLD (U7) registers */
-#define PCM990_CTRL_REG0	0x0000	/* RESET REGISTER */
-#define PCM990_CTRL_SYSRES	0x0001	/* System RESET REGISTER */
-#define PCM990_CTRL_RESOUT	0x0002	/* RESETOUT Enable REGISTER */
-#define PCM990_CTRL_RESGPIO	0x0004	/* RESETGPIO Enable REGISTER */
-
-#define PCM990_CTRL_REG1	0x0002	/* Power REGISTER */
-#define PCM990_CTRL_5VOFF	0x0001	/* Disable  5V Regulators */
-#define PCM990_CTRL_CANPWR	0x0004	/* Enable CANPWR ADUM */
-#define PCM990_CTRL_PM_5V	0x0008	/* Read 5V OK */
-
-#define PCM990_CTRL_REG2	0x0004	/* LED REGISTER */
-#define PCM990_CTRL_LEDPWR	0x0001	/* POWER LED enable */
-#define PCM990_CTRL_LEDBAS	0x0002	/* BASIS LED enable */
-#define PCM990_CTRL_LEDUSR	0x0004	/* USER LED enable */
-
-#define PCM990_CTRL_REG3	0x0006	/* LCD CTRL REGISTER 3 */
-#define PCM990_CTRL_LCDPWR	0x0001	/* RW LCD Power on */
-#define PCM990_CTRL_LCDON	0x0002	/* RW LCD Latch on */
-#define PCM990_CTRL_LCDPOS1	0x0004	/* RW POS 1 */
-#define PCM990_CTRL_LCDPOS2	0x0008	/* RW POS 2 */
-
-#define PCM990_CTRL_REG4	0x0008	/* MMC1 CTRL REGISTER 4 */
-#define PCM990_CTRL_MMC1PWR	0x0001 /* RW MMC1 Power on */
-
-#define PCM990_CTRL_REG5	0x000A	/* MMC2 CTRL REGISTER 5 */
-#define PCM990_CTRL_MMC2PWR	0x0001	/* RW MMC2 Power on */
-#define PCM990_CTRL_MMC2LED	0x0002	/* RW MMC2 LED */
-#define PCM990_CTRL_MMC2DE	0x0004	/* R MMC2 Card detect */
-#define PCM990_CTRL_MMC2WP	0x0008	/* R MMC2 Card write protect */
-
-#define PCM990_CTRL_REG6	0x000C	/* Interrupt Clear REGISTER */
-#define PCM990_CTRL_INTC0	0x0001	/* Clear Reg BT Detect */
-#define PCM990_CTRL_INTC1	0x0002	/* Clear Reg FR RI */
-#define PCM990_CTRL_INTC2	0x0004	/* Clear Reg MMC1 Detect */
-#define PCM990_CTRL_INTC3	0x0008	/* Clear Reg PM_5V off */
-
-#define PCM990_CTRL_REG7	0x000E	/* Interrupt Enable REGISTER */
-#define PCM990_CTRL_ENAINT0	0x0001	/* Enable Int BT Detect */
-#define PCM990_CTRL_ENAINT1	0x0002	/* Enable Int FR RI */
-#define PCM990_CTRL_ENAINT2	0x0004	/* Enable Int MMC1 Detect */
-#define PCM990_CTRL_ENAINT3	0x0008	/* Enable Int PM_5V off */
-
-#define PCM990_CTRL_REG8	0x0014	/* Uart REGISTER */
-#define PCM990_CTRL_FFSD	0x0001	/* BT Uart Enable */
-#define PCM990_CTRL_BTSD	0x0002	/* FF Uart Enable */
-#define PCM990_CTRL_FFRI	0x0004	/* FF Uart RI detect */
-#define PCM990_CTRL_BTRX	0x0008	/* BT Uart Rx detect */
-
-#define PCM990_CTRL_REG9	0x0010	/* AC97 Flash REGISTER */
-#define PCM990_CTRL_FLWP	0x0001	/* pC Flash Write Protect */
-#define PCM990_CTRL_FLDIS	0x0002	/* pC Flash Disable */
-#define PCM990_CTRL_AC97ENA	0x0004	/* Enable AC97 Expansion */
-
-#define PCM990_CTRL_REG10	0x0012	/* GPS-REGISTER */
-#define PCM990_CTRL_GPSPWR	0x0004	/* GPS-Modul Power on */
-#define PCM990_CTRL_GPSENA	0x0008	/* GPS-Modul Enable */
-
-#define PCM990_CTRL_REG11	0x0014	/* Accu REGISTER */
-#define PCM990_CTRL_ACENA	0x0001	/* Charge Enable */
-#define PCM990_CTRL_ACSEL	0x0002	/* Charge Akku -> DC Enable */
-#define PCM990_CTRL_ACPRES	0x0004	/* DC Present */
-#define PCM990_CTRL_ACALARM	0x0008	/* Error Akku */
-
-#define PCM990_CTRL_P2V(x)	((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE)
-#define PCM990_CTRL_V2P(x)	((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __PCM990_CTRL_REG(x) \
-		(*((volatile unsigned char *)PCM990_CTRL_P2V(x)))
-#else
-#  define __PCM990_CTRL_REG(x)	PCM990_CTRL_P2V(x)
-#endif
-
-#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
-#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
-#define PCM990_CTRL0	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0)
-#define PCM990_CTRL1	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1)
-#define PCM990_CTRL2	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2)
-#define PCM990_CTRL3	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3)
-#define PCM990_CTRL4	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4)
-#define PCM990_CTRL5	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5)
-#define PCM990_CTRL6	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
-#define PCM990_CTRL7	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
-#define PCM990_CTRL8	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8)
-#define PCM990_CTRL9	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9)
-#define PCM990_CTRL10	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10)
-#define PCM990_CTRL11	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11)
-
-
-/*
- * IDE
- */
-#define PCM990_IDE_IRQ_GPIO	13
-#define PCM990_IDE_IRQ		IRQ_GPIO(PCM990_IDE_IRQ_GPIO)
-#define PCM990_IDE_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-#define PCM990_IDE_PLD_PHYS	0x20000000	/* 16 bit wide */
-#define PCM990_IDE_PLD_BASE	0xee000000
-#define PCM990_IDE_PLD_SIZE	(1*1024*1024)
-
-/* visible CPLD (U6) registers */
-#define PCM990_IDE_PLD_REG0	0x1000	/* OFFSET IDE REGISTER 0 */
-#define PCM990_IDE_PM5V		0x0004	/* R System VCC_5V */
-#define PCM990_IDE_STBY		0x0008	/* R System StandBy */
-
-#define PCM990_IDE_PLD_REG1	0x1002	/* OFFSET IDE REGISTER 1 */
-#define PCM990_IDE_IDEMODE	0x0001	/* R TrueIDE Mode */
-#define PCM990_IDE_DMAENA	0x0004	/* RW DMA Enable */
-#define PCM990_IDE_DMA1_0	0x0008	/* RW 1=DREQ1 0=DREQ0 */
-
-#define PCM990_IDE_PLD_REG2	0x1004	/* OFFSET IDE REGISTER 2 */
-#define PCM990_IDE_RESENA	0x0001	/* RW IDE Reset Bit enable */
-#define PCM990_IDE_RES		0x0002	/* RW IDE Reset Bit */
-#define PCM990_IDE_RDY		0x0008	/* RDY */
-
-#define PCM990_IDE_PLD_REG3	0x1006	/* OFFSET IDE REGISTER 3 */
-#define PCM990_IDE_IDEOE	0x0001	/* RW Latch on Databus */
-#define PCM990_IDE_IDEON	0x0002	/* RW Latch on Control Address */
-#define PCM990_IDE_IDEIN	0x0004	/* RW Latch on Interrupt usw. */
-
-#define PCM990_IDE_PLD_REG4	0x1008	/* OFFSET IDE REGISTER 4 */
-#define PCM990_IDE_PWRENA	0x0001	/* RW IDE Power enable */
-#define PCM990_IDE_5V		0x0002	/* R IDE Power 5V */
-#define PCM990_IDE_PWG		0x0008	/* R IDE Power is on */
-
-#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE)
-#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS)
-
-#ifndef __ASSEMBLY__
-# define  __PCM990_IDE_PLD_REG(x) \
-	(*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x)))
-#else
-# define  __PCM990_IDE_PLD_REG(x)	PCM990_IDE_PLD_P2V(x)
-#endif
-
-#define PCM990_IDE0 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0)
-#define PCM990_IDE1 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1)
-#define PCM990_IDE2 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2)
-#define PCM990_IDE3 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3)
-#define PCM990_IDE4 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4)
-
-/*
- * Compact Flash
- */
-#define PCM990_CF_IRQ_GPIO	11
-#define PCM990_CF_IRQ		IRQ_GPIO(PCM990_CF_IRQ_GPIO)
-#define PCM990_CF_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-
-#define PCM990_CF_CD_GPIO	12
-#define PCM990_CF_CD		IRQ_GPIO(PCM990_CF_CD_GPIO)
-#define PCM990_CF_CD_EDGE	IRQ_TYPE_EDGE_RISING
-
-#define PCM990_CF_PLD_PHYS	0x30000000	/* 16 bit wide */
-#define PCM990_CF_PLD_BASE	0xef000000
-#define PCM990_CF_PLD_SIZE	(1*1024*1024)
-#define PCM990_CF_PLD_P2V(x)	((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE)
-#define PCM990_CF_PLD_V2P(x)	((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS)
-
-/* visible CPLD (U6) registers */
-#define PCM990_CF_PLD_REG0	0x1000	/* OFFSET CF REGISTER 0 */
-#define PCM990_CF_REG0_LED	0x0001	/* RW LED on */
-#define PCM990_CF_REG0_BLK	0x0002	/* RW LED flash when access */
-#define PCM990_CF_REG0_PM5V	0x0004	/* R System VCC_5V enable */
-#define PCM990_CF_REG0_STBY	0x0008	/* R System StandBy */
-
-#define PCM990_CF_PLD_REG1	0x1002	/* OFFSET CF REGISTER 1 */
-#define PCM990_CF_REG1_IDEMODE	0x0001	/* RW CF card run as TrueIDE */
-#define PCM990_CF_REG1_CF0	0x0002	/* RW CF card at ADDR 0x28000000 */
-
-#define PCM990_CF_PLD_REG2	0x1004	/* OFFSET CF REGISTER 2 */
-#define PCM990_CF_REG2_RES	0x0002	/* RW CF RESET BIT */
-#define PCM990_CF_REG2_RDYENA	0x0004	/* RW Enable CF_RDY */
-#define PCM990_CF_REG2_RDY	0x0008	/* R CF_RDY auf PWAIT */
-
-#define PCM990_CF_PLD_REG3	0x1006	/* OFFSET CF REGISTER 3 */
-#define PCM990_CF_REG3_CFOE	0x0001	/* RW Latch on Databus */
-#define PCM990_CF_REG3_CFON	0x0002	/* RW Latch on Control Address */
-#define PCM990_CF_REG3_CFIN	0x0004	/* RW Latch on Interrupt usw. */
-#define PCM990_CF_REG3_CFCD	0x0008	/* RW Latch on CD1/2 VS1/2 usw */
-
-#define PCM990_CF_PLD_REG4	0x1008	/* OFFSET CF REGISTER 4 */
-#define PCM990_CF_REG4_PWRENA	0x0001	/* RW CF Power on (CD1/2 = "00") */
-#define PCM990_CF_REG4_5_3V	0x0002	/* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */
-#define PCM990_CF_REG4_3B	0x0004	/* RW 3.0V Backup from VCC (5_3V=0) */
-#define PCM990_CF_REG4_PWG	0x0008	/* R CF-Power is on */
-
-#define PCM990_CF_PLD_REG5	0x100A	/* OFFSET CF REGISTER 5 */
-#define PCM990_CF_REG5_BVD1	0x0001	/* R CF /BVD1 */
-#define PCM990_CF_REG5_BVD2	0x0002	/* R CF /BVD2 */
-#define PCM990_CF_REG5_VS1	0x0004	/* R CF /VS1 */
-#define PCM990_CF_REG5_VS2	0x0008	/* R CF /VS2 */
-
-#define PCM990_CF_PLD_REG6	0x100C	/* OFFSET CF REGISTER 6 */
-#define PCM990_CF_REG6_CD1	0x0001	/* R CF Card_Detect1 */
-#define PCM990_CF_REG6_CD2	0x0002	/* R CF Card_Detect2 */
-
-#ifndef __ASSEMBLY__
-#  define  __PCM990_CF_PLD_REG(x) \
-	(*((volatile unsigned char *)PCM990_CF_PLD_P2V(x)))
-#else
-#  define  __PCM990_CF_PLD_REG(x)	PCM990_CF_PLD_P2V(x)
-#endif
-
-#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0)
-#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1)
-#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2)
-#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3)
-#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4)
-#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5)
-#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6)
-
-/*
- * Wolfson AC97 Touch
- */
-#define PCM990_AC97_IRQ_GPIO	10
-#define PCM990_AC97_IRQ		IRQ_GPIO(PCM990_AC97_IRQ_GPIO)
-#define PCM990_AC97_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-
-/*
- * MMC phyCORE
- */
-#define PCM990_MMC0_IRQ_GPIO	9
-#define PCM990_MMC0_IRQ		IRQ_GPIO(PCM990_MMC0_IRQ_GPIO)
-#define PCM990_MMC0_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-
-/*
- * USB phyCore
- */
-#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN)
-#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT)
diff --git a/include/asm-arm/arch-pxa/poodle.h b/include/asm-arm/arch-pxa/poodle.h
deleted file mode 100644
index 4d6a403..0000000
--- a/include/asm-arm/arch-pxa/poodle.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/poodle.h
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Based on:
- *   linux/include/asm-arm/arch-sa1100/collie.h
- *
- * ChangeLog:
- *   04-06-2001 Lineo Japan, Inc.
- *   04-16-2001 SHARP Corporation
- *   Update to 2.6 John Lenz
- */
-#ifndef __ASM_ARCH_POODLE_H
-#define __ASM_ARCH_POODLE_H  1
-
-/*
- * GPIOs
- */
-/* PXA GPIOs */
-#define POODLE_GPIO_ON_KEY		(0)
-#define POODLE_GPIO_AC_IN		(1)
-#define POODLE_GPIO_CO			16
-#define POODLE_GPIO_TP_INT		(5)
-#define POODLE_GPIO_WAKEUP		(11)	/* change battery */
-#define POODLE_GPIO_GA_INT		(10)
-#define POODLE_GPIO_IR_ON		(22)
-#define POODLE_GPIO_HP_IN		(4)
-#define POODLE_GPIO_CF_IRQ		(17)
-#define POODLE_GPIO_CF_CD		(14)
-#define POODLE_GPIO_CF_STSCHG		(14)
-#define POODLE_GPIO_SD_PWR		(33)
-#define POODLE_GPIO_SD_PWR1		(3)
-#define POODLE_GPIO_nSD_CLK		(6)
-#define POODLE_GPIO_nSD_WP		(7)
-#define POODLE_GPIO_nSD_INT		(8)
-#define POODLE_GPIO_nSD_DETECT		(9)
-#define POODLE_GPIO_MAIN_BAT_LOW	(13)
-#define POODLE_GPIO_BAT_COVER		(13)
-#define POODLE_GPIO_USB_PULLUP		(20)
-#define POODLE_GPIO_ADC_TEMP_ON		(21)
-#define POODLE_GPIO_BYPASS_ON		(36)
-#define POODLE_GPIO_CHRG_ON		(38)
-#define POODLE_GPIO_CHRG_FULL		(16)
-#define POODLE_GPIO_DISCHARGE_ON        (42) /* Enable battery discharge */
-
-/* PXA GPIOs */
-#define POODLE_IRQ_GPIO_ON_KEY		IRQ_GPIO(0)
-#define POODLE_IRQ_GPIO_AC_IN		IRQ_GPIO(1)
-#define POODLE_IRQ_GPIO_HP_IN		IRQ_GPIO(4)
-#define POODLE_IRQ_GPIO_CO		IRQ_GPIO(16)
-#define POODLE_IRQ_GPIO_TP_INT		IRQ_GPIO(5)
-#define POODLE_IRQ_GPIO_WAKEUP		IRQ_GPIO(11)
-#define POODLE_IRQ_GPIO_GA_INT		IRQ_GPIO(10)
-#define POODLE_IRQ_GPIO_CF_IRQ		IRQ_GPIO(17)
-#define POODLE_IRQ_GPIO_CF_CD		IRQ_GPIO(14)
-#define POODLE_IRQ_GPIO_nSD_INT		IRQ_GPIO(8)
-#define POODLE_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(9)
-#define POODLE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO(13)
-
-/* SCOOP GPIOs */
-#define POODLE_SCOOP_CHARGE_ON	SCOOP_GPCR_PA11
-#define POODLE_SCOOP_CP401	SCOOP_GPCR_PA13
-#define POODLE_SCOOP_VPEN	SCOOP_GPCR_PA18
-#define POODLE_SCOOP_L_PCLK	SCOOP_GPCR_PA20
-#define POODLE_SCOOP_L_LCLK	SCOOP_GPCR_PA21
-#define POODLE_SCOOP_HS_OUT	SCOOP_GPCR_PA22
-
-#define POODLE_SCOOP_IO_DIR	( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
-#define POODLE_SCOOP_IO_OUT	( 0 )
-
-extern struct platform_device poodle_locomo_device;
-
-#endif /* __ASM_ARCH_POODLE_H  */
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
deleted file mode 100644
index dce9308..0000000
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ /dev/null
@@ -1,1070 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/pxa-regs.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PXA_REGS_H
-#define __PXA_REGS_H
-
-
-/*
- * PXA Chip selects
- */
-
-#define PXA_CS0_PHYS	0x00000000
-#define PXA_CS1_PHYS	0x04000000
-#define PXA_CS2_PHYS	0x08000000
-#define PXA_CS3_PHYS	0x0C000000
-#define PXA_CS4_PHYS	0x10000000
-#define PXA_CS5_PHYS	0x14000000
-
-
-/*
- * Personal Computer Memory Card International Association (PCMCIA) sockets
- */
-
-#define PCMCIAPrtSp	0x04000000	/* PCMCIA Partition Space [byte]   */
-#define PCMCIASp	(4*PCMCIAPrtSp)	/* PCMCIA Space [byte]             */
-#define PCMCIAIOSp	PCMCIAPrtSp	/* PCMCIA I/O Space [byte]         */
-#define PCMCIAAttrSp	PCMCIAPrtSp	/* PCMCIA Attribute Space [byte]   */
-#define PCMCIAMemSp	PCMCIAPrtSp	/* PCMCIA Memory Space [byte]      */
-
-#define PCMCIA0Sp	PCMCIASp	/* PCMCIA 0 Space [byte]           */
-#define PCMCIA0IOSp	PCMCIAIOSp	/* PCMCIA 0 I/O Space [byte]       */
-#define PCMCIA0AttrSp	PCMCIAAttrSp	/* PCMCIA 0 Attribute Space [byte] */
-#define PCMCIA0MemSp	PCMCIAMemSp	/* PCMCIA 0 Memory Space [byte]    */
-
-#define PCMCIA1Sp	PCMCIASp	/* PCMCIA 1 Space [byte]           */
-#define PCMCIA1IOSp	PCMCIAIOSp	/* PCMCIA 1 I/O Space [byte]       */
-#define PCMCIA1AttrSp	PCMCIAAttrSp	/* PCMCIA 1 Attribute Space [byte] */
-#define PCMCIA1MemSp	PCMCIAMemSp	/* PCMCIA 1 Memory Space [byte]    */
-
-#define _PCMCIA(Nb)	        	/* PCMCIA [0..1]                   */ \
-                	(0x20000000 + (Nb)*PCMCIASp)
-#define _PCMCIAIO(Nb)	_PCMCIA (Nb)	/* PCMCIA I/O [0..1]               */
-#define _PCMCIAAttr(Nb)	        	/* PCMCIA Attribute [0..1]         */ \
-                	(_PCMCIA (Nb) + 2*PCMCIAPrtSp)
-#define _PCMCIAMem(Nb)	        	/* PCMCIA Memory [0..1]            */ \
-                	(_PCMCIA (Nb) + 3*PCMCIAPrtSp)
-
-#define _PCMCIA0	_PCMCIA (0)	/* PCMCIA 0                        */
-#define _PCMCIA0IO	_PCMCIAIO (0)	/* PCMCIA 0 I/O                    */
-#define _PCMCIA0Attr	_PCMCIAAttr (0)	/* PCMCIA 0 Attribute              */
-#define _PCMCIA0Mem	_PCMCIAMem (0)	/* PCMCIA 0 Memory                 */
-
-#define _PCMCIA1	_PCMCIA (1)	/* PCMCIA 1                        */
-#define _PCMCIA1IO	_PCMCIAIO (1)	/* PCMCIA 1 I/O                    */
-#define _PCMCIA1Attr	_PCMCIAAttr (1)	/* PCMCIA 1 Attribute              */
-#define _PCMCIA1Mem	_PCMCIAMem (1)	/* PCMCIA 1 Memory                 */
-
-
-
-/*
- * DMA Controller
- */
-
-#define DCSR0		__REG(0x40000000)  /* DMA Control / Status Register for Channel 0 */
-#define DCSR1		__REG(0x40000004)  /* DMA Control / Status Register for Channel 1 */
-#define DCSR2		__REG(0x40000008)  /* DMA Control / Status Register for Channel 2 */
-#define DCSR3		__REG(0x4000000c)  /* DMA Control / Status Register for Channel 3 */
-#define DCSR4		__REG(0x40000010)  /* DMA Control / Status Register for Channel 4 */
-#define DCSR5		__REG(0x40000014)  /* DMA Control / Status Register for Channel 5 */
-#define DCSR6		__REG(0x40000018)  /* DMA Control / Status Register for Channel 6 */
-#define DCSR7		__REG(0x4000001c)  /* DMA Control / Status Register for Channel 7 */
-#define DCSR8		__REG(0x40000020)  /* DMA Control / Status Register for Channel 8 */
-#define DCSR9		__REG(0x40000024)  /* DMA Control / Status Register for Channel 9 */
-#define DCSR10		__REG(0x40000028)  /* DMA Control / Status Register for Channel 10 */
-#define DCSR11		__REG(0x4000002c)  /* DMA Control / Status Register for Channel 11 */
-#define DCSR12		__REG(0x40000030)  /* DMA Control / Status Register for Channel 12 */
-#define DCSR13		__REG(0x40000034)  /* DMA Control / Status Register for Channel 13 */
-#define DCSR14		__REG(0x40000038)  /* DMA Control / Status Register for Channel 14 */
-#define DCSR15		__REG(0x4000003c)  /* DMA Control / Status Register for Channel 15 */
-
-#define DCSR(x)		__REG2(0x40000000, (x) << 2)
-
-#define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
-#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
-#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
-#ifdef CONFIG_PXA27x
-#define DCSR_EORIRQEN	(1 << 28)       /* End of Receive Interrupt Enable (R/W) */
-#define DCSR_EORJMPEN	(1 << 27)       /* Jump to next descriptor on EOR */
-#define DCSR_EORSTOPEN	(1 << 26)       /* STOP on an EOR */
-#define DCSR_SETCMPST	(1 << 25)       /* Set Descriptor Compare Status */
-#define DCSR_CLRCMPST	(1 << 24)       /* Clear Descriptor Compare Status */
-#define DCSR_CMPST	(1 << 10)       /* The Descriptor Compare Status */
-#define DCSR_EORINTR	(1 << 9)        /* The end of Receive */
-#endif
-#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
-#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
-#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
-#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
-#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
-
-#define DALGN		__REG(0x400000a0)  /* DMA Alignment Register */
-#define DINT		__REG(0x400000f0)  /* DMA Interrupt Register */
-
-#define DRCMR(n)	(*(((n) < 64) ? \
-			&__REG2(0x40000100, ((n) & 0x3f) << 2) : \
-			&__REG2(0x40001100, ((n) & 0x3f) << 2)))
-
-#define DRCMR0		__REG(0x40000100)  /* Request to Channel Map Register for DREQ 0 */
-#define DRCMR1		__REG(0x40000104)  /* Request to Channel Map Register for DREQ 1 */
-#define DRCMR2		__REG(0x40000108)  /* Request to Channel Map Register for I2S receive Request */
-#define DRCMR3		__REG(0x4000010c)  /* Request to Channel Map Register for I2S transmit Request */
-#define DRCMR4		__REG(0x40000110)  /* Request to Channel Map Register for BTUART receive Request */
-#define DRCMR5		__REG(0x40000114)  /* Request to Channel Map Register for BTUART transmit Request. */
-#define DRCMR6		__REG(0x40000118)  /* Request to Channel Map Register for FFUART receive Request */
-#define DRCMR7		__REG(0x4000011c)  /* Request to Channel Map Register for FFUART transmit Request */
-#define DRCMR8		__REG(0x40000120)  /* Request to Channel Map Register for AC97 microphone Request */
-#define DRCMR9		__REG(0x40000124)  /* Request to Channel Map Register for AC97 modem receive Request */
-#define DRCMR10		__REG(0x40000128)  /* Request to Channel Map Register for AC97 modem transmit Request */
-#define DRCMR11		__REG(0x4000012c)  /* Request to Channel Map Register for AC97 audio receive Request */
-#define DRCMR12		__REG(0x40000130)  /* Request to Channel Map Register for AC97 audio transmit Request */
-#define DRCMR13		__REG(0x40000134)  /* Request to Channel Map Register for SSP receive Request */
-#define DRCMR14		__REG(0x40000138)  /* Request to Channel Map Register for SSP transmit Request */
-#define DRCMR15		__REG(0x4000013c)  /* Request to Channel Map Register for SSP2 receive Request */
-#define DRCMR16		__REG(0x40000140)  /* Request to Channel Map Register for SSP2 transmit Request */
-#define DRCMR17		__REG(0x40000144)  /* Request to Channel Map Register for ICP receive Request */
-#define DRCMR18		__REG(0x40000148)  /* Request to Channel Map Register for ICP transmit Request */
-#define DRCMR19		__REG(0x4000014c)  /* Request to Channel Map Register for STUART receive Request */
-#define DRCMR20		__REG(0x40000150)  /* Request to Channel Map Register for STUART transmit Request */
-#define DRCMR21		__REG(0x40000154)  /* Request to Channel Map Register for MMC receive Request */
-#define DRCMR22		__REG(0x40000158)  /* Request to Channel Map Register for MMC transmit Request */
-#define DRCMR23		__REG(0x4000015c)  /* Reserved */
-#define DRCMR24		__REG(0x40000160)  /* Reserved */
-#define DRCMR25		__REG(0x40000164)  /* Request to Channel Map Register for USB endpoint 1 Request */
-#define DRCMR26		__REG(0x40000168)  /* Request to Channel Map Register for USB endpoint 2 Request */
-#define DRCMR27		__REG(0x4000016C)  /* Request to Channel Map Register for USB endpoint 3 Request */
-#define DRCMR28		__REG(0x40000170)  /* Request to Channel Map Register for USB endpoint 4 Request */
-#define DRCMR29		__REG(0x40000174)  /* Reserved */
-#define DRCMR30		__REG(0x40000178)  /* Request to Channel Map Register for USB endpoint 6 Request */
-#define DRCMR31		__REG(0x4000017C)  /* Request to Channel Map Register for USB endpoint 7 Request */
-#define DRCMR32		__REG(0x40000180)  /* Request to Channel Map Register for USB endpoint 8 Request */
-#define DRCMR33		__REG(0x40000184)  /* Request to Channel Map Register for USB endpoint 9 Request */
-#define DRCMR34		__REG(0x40000188)  /* Reserved */
-#define DRCMR35		__REG(0x4000018C)  /* Request to Channel Map Register for USB endpoint 11 Request */
-#define DRCMR36		__REG(0x40000190)  /* Request to Channel Map Register for USB endpoint 12 Request */
-#define DRCMR37		__REG(0x40000194)  /* Request to Channel Map Register for USB endpoint 13 Request */
-#define DRCMR38		__REG(0x40000198)  /* Request to Channel Map Register for USB endpoint 14 Request */
-#define DRCMR39		__REG(0x4000019C)  /* Reserved */
-#define DRCMR66		__REG(0x40001108)  /* Request to Channel Map Register for SSP3 receive Request */
-#define DRCMR67		__REG(0x4000110C)  /* Request to Channel Map Register for SSP3 transmit Request */
-#define DRCMR68		__REG(0x40001110)  /* Request to Channel Map Register for Camera FIFO 0 Request */
-#define DRCMR69		__REG(0x40001114)  /* Request to Channel Map Register for Camera FIFO 1 Request */
-#define DRCMR70		__REG(0x40001118)  /* Request to Channel Map Register for Camera FIFO 2 Request */
-
-#define DRCMRRXSADR	DRCMR2
-#define DRCMRTXSADR	DRCMR3
-#define DRCMRRXBTRBR	DRCMR4
-#define DRCMRTXBTTHR	DRCMR5
-#define DRCMRRXFFRBR	DRCMR6
-#define DRCMRTXFFTHR	DRCMR7
-#define DRCMRRXMCDR	DRCMR8
-#define DRCMRRXMODR	DRCMR9
-#define DRCMRTXMODR	DRCMR10
-#define DRCMRRXPCDR	DRCMR11
-#define DRCMRTXPCDR	DRCMR12
-#define DRCMRRXSSDR	DRCMR13
-#define DRCMRTXSSDR	DRCMR14
-#define DRCMRRXSS2DR   DRCMR15
-#define DRCMRTXSS2DR   DRCMR16
-#define DRCMRRXICDR	DRCMR17
-#define DRCMRTXICDR	DRCMR18
-#define DRCMRRXSTRBR	DRCMR19
-#define DRCMRTXSTTHR	DRCMR20
-#define DRCMRRXMMC	DRCMR21
-#define DRCMRTXMMC	DRCMR22
-#define DRCMRRXSS3DR   DRCMR66
-#define DRCMRTXSS3DR   DRCMR67
-#define DRCMRUDC(x)	DRCMR((x) + 24)
-
-#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
-#define DRCMR_CHLNUM	0x1f		/* mask for Channel Number (read / write) */
-
-#define DDADR0		__REG(0x40000200)  /* DMA Descriptor Address Register Channel 0 */
-#define DSADR0		__REG(0x40000204)  /* DMA Source Address Register Channel 0 */
-#define DTADR0		__REG(0x40000208)  /* DMA Target Address Register Channel 0 */
-#define DCMD0		__REG(0x4000020c)  /* DMA Command Address Register Channel 0 */
-#define DDADR1		__REG(0x40000210)  /* DMA Descriptor Address Register Channel 1 */
-#define DSADR1		__REG(0x40000214)  /* DMA Source Address Register Channel 1 */
-#define DTADR1		__REG(0x40000218)  /* DMA Target Address Register Channel 1 */
-#define DCMD1		__REG(0x4000021c)  /* DMA Command Address Register Channel 1 */
-#define DDADR2		__REG(0x40000220)  /* DMA Descriptor Address Register Channel 2 */
-#define DSADR2		__REG(0x40000224)  /* DMA Source Address Register Channel 2 */
-#define DTADR2		__REG(0x40000228)  /* DMA Target Address Register Channel 2 */
-#define DCMD2		__REG(0x4000022c)  /* DMA Command Address Register Channel 2 */
-#define DDADR3		__REG(0x40000230)  /* DMA Descriptor Address Register Channel 3 */
-#define DSADR3		__REG(0x40000234)  /* DMA Source Address Register Channel 3 */
-#define DTADR3		__REG(0x40000238)  /* DMA Target Address Register Channel 3 */
-#define DCMD3		__REG(0x4000023c)  /* DMA Command Address Register Channel 3 */
-#define DDADR4		__REG(0x40000240)  /* DMA Descriptor Address Register Channel 4 */
-#define DSADR4		__REG(0x40000244)  /* DMA Source Address Register Channel 4 */
-#define DTADR4		__REG(0x40000248)  /* DMA Target Address Register Channel 4 */
-#define DCMD4		__REG(0x4000024c)  /* DMA Command Address Register Channel 4 */
-#define DDADR5		__REG(0x40000250)  /* DMA Descriptor Address Register Channel 5 */
-#define DSADR5		__REG(0x40000254)  /* DMA Source Address Register Channel 5 */
-#define DTADR5		__REG(0x40000258)  /* DMA Target Address Register Channel 5 */
-#define DCMD5		__REG(0x4000025c)  /* DMA Command Address Register Channel 5 */
-#define DDADR6		__REG(0x40000260)  /* DMA Descriptor Address Register Channel 6 */
-#define DSADR6		__REG(0x40000264)  /* DMA Source Address Register Channel 6 */
-#define DTADR6		__REG(0x40000268)  /* DMA Target Address Register Channel 6 */
-#define DCMD6		__REG(0x4000026c)  /* DMA Command Address Register Channel 6 */
-#define DDADR7		__REG(0x40000270)  /* DMA Descriptor Address Register Channel 7 */
-#define DSADR7		__REG(0x40000274)  /* DMA Source Address Register Channel 7 */
-#define DTADR7		__REG(0x40000278)  /* DMA Target Address Register Channel 7 */
-#define DCMD7		__REG(0x4000027c)  /* DMA Command Address Register Channel 7 */
-#define DDADR8		__REG(0x40000280)  /* DMA Descriptor Address Register Channel 8 */
-#define DSADR8		__REG(0x40000284)  /* DMA Source Address Register Channel 8 */
-#define DTADR8		__REG(0x40000288)  /* DMA Target Address Register Channel 8 */
-#define DCMD8		__REG(0x4000028c)  /* DMA Command Address Register Channel 8 */
-#define DDADR9		__REG(0x40000290)  /* DMA Descriptor Address Register Channel 9 */
-#define DSADR9		__REG(0x40000294)  /* DMA Source Address Register Channel 9 */
-#define DTADR9		__REG(0x40000298)  /* DMA Target Address Register Channel 9 */
-#define DCMD9		__REG(0x4000029c)  /* DMA Command Address Register Channel 9 */
-#define DDADR10		__REG(0x400002a0)  /* DMA Descriptor Address Register Channel 10 */
-#define DSADR10		__REG(0x400002a4)  /* DMA Source Address Register Channel 10 */
-#define DTADR10		__REG(0x400002a8)  /* DMA Target Address Register Channel 10 */
-#define DCMD10		__REG(0x400002ac)  /* DMA Command Address Register Channel 10 */
-#define DDADR11		__REG(0x400002b0)  /* DMA Descriptor Address Register Channel 11 */
-#define DSADR11		__REG(0x400002b4)  /* DMA Source Address Register Channel 11 */
-#define DTADR11		__REG(0x400002b8)  /* DMA Target Address Register Channel 11 */
-#define DCMD11		__REG(0x400002bc)  /* DMA Command Address Register Channel 11 */
-#define DDADR12		__REG(0x400002c0)  /* DMA Descriptor Address Register Channel 12 */
-#define DSADR12		__REG(0x400002c4)  /* DMA Source Address Register Channel 12 */
-#define DTADR12		__REG(0x400002c8)  /* DMA Target Address Register Channel 12 */
-#define DCMD12		__REG(0x400002cc)  /* DMA Command Address Register Channel 12 */
-#define DDADR13		__REG(0x400002d0)  /* DMA Descriptor Address Register Channel 13 */
-#define DSADR13		__REG(0x400002d4)  /* DMA Source Address Register Channel 13 */
-#define DTADR13		__REG(0x400002d8)  /* DMA Target Address Register Channel 13 */
-#define DCMD13		__REG(0x400002dc)  /* DMA Command Address Register Channel 13 */
-#define DDADR14		__REG(0x400002e0)  /* DMA Descriptor Address Register Channel 14 */
-#define DSADR14		__REG(0x400002e4)  /* DMA Source Address Register Channel 14 */
-#define DTADR14		__REG(0x400002e8)  /* DMA Target Address Register Channel 14 */
-#define DCMD14		__REG(0x400002ec)  /* DMA Command Address Register Channel 14 */
-#define DDADR15		__REG(0x400002f0)  /* DMA Descriptor Address Register Channel 15 */
-#define DSADR15		__REG(0x400002f4)  /* DMA Source Address Register Channel 15 */
-#define DTADR15		__REG(0x400002f8)  /* DMA Target Address Register Channel 15 */
-#define DCMD15		__REG(0x400002fc)  /* DMA Command Address Register Channel 15 */
-
-#define DDADR(x)	__REG2(0x40000200, (x) << 4)
-#define DSADR(x)	__REG2(0x40000204, (x) << 4)
-#define DTADR(x)	__REG2(0x40000208, (x) << 4)
-#define DCMD(x)		__REG2(0x4000020c, (x) << 4)
-
-#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor (mask) */
-#define DDADR_STOP	(1 << 0)	/* Stop (read / write) */
-
-#define DCMD_INCSRCADDR	(1 << 31)	/* Source Address Increment Setting. */
-#define DCMD_INCTRGADDR	(1 << 30)	/* Target Address Increment Setting. */
-#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
-#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
-#define DCMD_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
-#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
-#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
-#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
-#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
-#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
-#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
-#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
-#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
-#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
-
-
-/*
- * UARTs
- */
-
-/* Full Function UART (FFUART) */
-#define FFUART		FFRBR
-#define FFRBR		__REG(0x40100000)  /* Receive Buffer Register (read only) */
-#define FFTHR		__REG(0x40100000)  /* Transmit Holding Register (write only) */
-#define FFIER		__REG(0x40100004)  /* Interrupt Enable Register (read/write) */
-#define FFIIR		__REG(0x40100008)  /* Interrupt ID Register (read only) */
-#define FFFCR		__REG(0x40100008)  /* FIFO Control Register (write only) */
-#define FFLCR		__REG(0x4010000C)  /* Line Control Register (read/write) */
-#define FFMCR		__REG(0x40100010)  /* Modem Control Register (read/write) */
-#define FFLSR		__REG(0x40100014)  /* Line Status Register (read only) */
-#define FFMSR		__REG(0x40100018)  /* Modem Status Register (read only) */
-#define FFSPR		__REG(0x4010001C)  /* Scratch Pad Register (read/write) */
-#define FFISR		__REG(0x40100020)  /* Infrared Selection Register (read/write) */
-#define FFDLL		__REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define FFDLH		__REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Bluetooth UART (BTUART) */
-#define BTUART		BTRBR
-#define BTRBR		__REG(0x40200000)  /* Receive Buffer Register (read only) */
-#define BTTHR		__REG(0x40200000)  /* Transmit Holding Register (write only) */
-#define BTIER		__REG(0x40200004)  /* Interrupt Enable Register (read/write) */
-#define BTIIR		__REG(0x40200008)  /* Interrupt ID Register (read only) */
-#define BTFCR		__REG(0x40200008)  /* FIFO Control Register (write only) */
-#define BTLCR		__REG(0x4020000C)  /* Line Control Register (read/write) */
-#define BTMCR		__REG(0x40200010)  /* Modem Control Register (read/write) */
-#define BTLSR		__REG(0x40200014)  /* Line Status Register (read only) */
-#define BTMSR		__REG(0x40200018)  /* Modem Status Register (read only) */
-#define BTSPR		__REG(0x4020001C)  /* Scratch Pad Register (read/write) */
-#define BTISR		__REG(0x40200020)  /* Infrared Selection Register (read/write) */
-#define BTDLL		__REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define BTDLH		__REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Standard UART (STUART) */
-#define STUART		STRBR
-#define STRBR		__REG(0x40700000)  /* Receive Buffer Register (read only) */
-#define STTHR		__REG(0x40700000)  /* Transmit Holding Register (write only) */
-#define STIER		__REG(0x40700004)  /* Interrupt Enable Register (read/write) */
-#define STIIR		__REG(0x40700008)  /* Interrupt ID Register (read only) */
-#define STFCR		__REG(0x40700008)  /* FIFO Control Register (write only) */
-#define STLCR		__REG(0x4070000C)  /* Line Control Register (read/write) */
-#define STMCR		__REG(0x40700010)  /* Modem Control Register (read/write) */
-#define STLSR		__REG(0x40700014)  /* Line Status Register (read only) */
-#define STMSR		__REG(0x40700018)  /* Reserved */
-#define STSPR		__REG(0x4070001C)  /* Scratch Pad Register (read/write) */
-#define STISR		__REG(0x40700020)  /* Infrared Selection Register (read/write) */
-#define STDLL		__REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define STDLH		__REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Hardware UART (HWUART) */
-#define HWUART		HWRBR
-#define HWRBR		__REG(0x41600000)  /* Receive Buffer Register (read only) */
-#define HWTHR		__REG(0x41600000)  /* Transmit Holding Register (write only) */
-#define HWIER		__REG(0x41600004)  /* Interrupt Enable Register (read/write) */
-#define HWIIR		__REG(0x41600008)  /* Interrupt ID Register (read only) */
-#define HWFCR		__REG(0x41600008)  /* FIFO Control Register (write only) */
-#define HWLCR		__REG(0x4160000C)  /* Line Control Register (read/write) */
-#define HWMCR		__REG(0x41600010)  /* Modem Control Register (read/write) */
-#define HWLSR		__REG(0x41600014)  /* Line Status Register (read only) */
-#define HWMSR		__REG(0x41600018)  /* Modem Status Register (read only) */
-#define HWSPR		__REG(0x4160001C)  /* Scratch Pad Register (read/write) */
-#define HWISR		__REG(0x41600020)  /* Infrared Selection Register (read/write) */
-#define HWFOR		__REG(0x41600024)  /* Receive FIFO Occupancy Register (read only) */
-#define HWABR		__REG(0x41600028)  /* Auto-Baud Control Register (read/write) */
-#define HWACR		__REG(0x4160002C)  /* Auto-Baud Count Register (read only) */
-#define HWDLL		__REG(0x41600000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define HWDLH		__REG(0x41600004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-#define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
-#define IER_UUE		(1 << 6)	/* UART Unit Enable */
-#define IER_NRZE	(1 << 5)	/* NRZ coding Enable */
-#define IER_RTIOE	(1 << 4)	/* Receiver Time Out Interrupt Enable */
-#define IER_MIE		(1 << 3)	/* Modem Interrupt Enable */
-#define IER_RLSE	(1 << 2)	/* Receiver Line Status Interrupt Enable */
-#define IER_TIE		(1 << 1)	/* Transmit Data request Interrupt Enable */
-#define IER_RAVIE	(1 << 0)	/* Receiver Data Available Interrupt Enable */
-
-#define IIR_FIFOES1	(1 << 7)	/* FIFO Mode Enable Status */
-#define IIR_FIFOES0	(1 << 6)	/* FIFO Mode Enable Status */
-#define IIR_TOD		(1 << 3)	/* Time Out Detected */
-#define IIR_IID2	(1 << 2)	/* Interrupt Source Encoded */
-#define IIR_IID1	(1 << 1)	/* Interrupt Source Encoded */
-#define IIR_IP		(1 << 0)	/* Interrupt Pending (active low) */
-
-#define FCR_ITL2	(1 << 7)	/* Interrupt Trigger Level */
-#define FCR_ITL1	(1 << 6)	/* Interrupt Trigger Level */
-#define FCR_RESETTF	(1 << 2)	/* Reset Transmitter FIFO */
-#define FCR_RESETRF	(1 << 1)	/* Reset Receiver FIFO */
-#define FCR_TRFIFOE	(1 << 0)	/* Transmit and Receive FIFO Enable */
-#define FCR_ITL_1	(0)
-#define FCR_ITL_8	(FCR_ITL1)
-#define FCR_ITL_16	(FCR_ITL2)
-#define FCR_ITL_32	(FCR_ITL2|FCR_ITL1)
-
-#define LCR_DLAB	(1 << 7)	/* Divisor Latch Access Bit */
-#define LCR_SB		(1 << 6)	/* Set Break */
-#define LCR_STKYP	(1 << 5)	/* Sticky Parity */
-#define LCR_EPS		(1 << 4)	/* Even Parity Select */
-#define LCR_PEN		(1 << 3)	/* Parity Enable */
-#define LCR_STB		(1 << 2)	/* Stop Bit */
-#define LCR_WLS1	(1 << 1)	/* Word Length Select */
-#define LCR_WLS0	(1 << 0)	/* Word Length Select */
-
-#define LSR_FIFOE	(1 << 7)	/* FIFO Error Status */
-#define LSR_TEMT	(1 << 6)	/* Transmitter Empty */
-#define LSR_TDRQ	(1 << 5)	/* Transmit Data Request */
-#define LSR_BI		(1 << 4)	/* Break Interrupt */
-#define LSR_FE		(1 << 3)	/* Framing Error */
-#define LSR_PE		(1 << 2)	/* Parity Error */
-#define LSR_OE		(1 << 1)	/* Overrun Error */
-#define LSR_DR		(1 << 0)	/* Data Ready */
-
-#define MCR_LOOP	(1 << 4)
-#define MCR_OUT2	(1 << 3)	/* force MSR_DCD in loopback mode */
-#define MCR_OUT1	(1 << 2)	/* force MSR_RI in loopback mode */
-#define MCR_RTS		(1 << 1)	/* Request to Send */
-#define MCR_DTR		(1 << 0)	/* Data Terminal Ready */
-
-#define MSR_DCD		(1 << 7)	/* Data Carrier Detect */
-#define MSR_RI		(1 << 6)	/* Ring Indicator */
-#define MSR_DSR		(1 << 5)	/* Data Set Ready */
-#define MSR_CTS		(1 << 4)	/* Clear To Send */
-#define MSR_DDCD	(1 << 3)	/* Delta Data Carrier Detect */
-#define MSR_TERI	(1 << 2)	/* Trailing Edge Ring Indicator */
-#define MSR_DDSR	(1 << 1)	/* Delta Data Set Ready */
-#define MSR_DCTS	(1 << 0)	/* Delta Clear To Send */
-
-/*
- * IrSR (Infrared Selection Register)
- */
-#define STISR_RXPL      (1 << 4)        /* Receive Data Polarity */
-#define STISR_TXPL      (1 << 3)        /* Transmit Data Polarity */
-#define STISR_XMODE     (1 << 2)        /* Transmit Pulse Width Select */
-#define STISR_RCVEIR    (1 << 1)        /* Receiver SIR Enable */
-#define STISR_XMITIR    (1 << 0)        /* Transmitter SIR Enable */
-
-
-/*
- * I2C registers
- */
-
-#define IBMR		__REG(0x40301680)  /* I2C Bus Monitor Register - IBMR */
-#define IDBR		__REG(0x40301688)  /* I2C Data Buffer Register - IDBR */
-#define ICR		__REG(0x40301690)  /* I2C Control Register - ICR */
-#define ISR		__REG(0x40301698)  /* I2C Status Register - ISR */
-#define ISAR		__REG(0x403016A0)  /* I2C Slave Address Register - ISAR */
-
-#define PWRIBMR    __REG(0x40f00180)  /* Power I2C Bus Monitor Register-IBMR */
-#define PWRIDBR    __REG(0x40f00188)  /* Power I2C Data Buffer Register-IDBR */
-#define PWRICR __REG(0x40f00190)  /* Power I2C Control Register - ICR */
-#define PWRISR __REG(0x40f00198)  /* Power I2C Status Register - ISR */
-#define PWRISAR    __REG(0x40f001A0)  /*Power I2C Slave Address Register-ISAR */
-
-#define ICR_START	(1 << 0)	   /* start bit */
-#define ICR_STOP	(1 << 1)	   /* stop bit */
-#define ICR_ACKNAK	(1 << 2)	   /* send ACK(0) or NAK(1) */
-#define ICR_TB		(1 << 3)	   /* transfer byte bit */
-#define ICR_MA		(1 << 4)	   /* master abort */
-#define ICR_SCLE	(1 << 5)	   /* master clock enable */
-#define ICR_IUE		(1 << 6)	   /* unit enable */
-#define ICR_GCD		(1 << 7)	   /* general call disable */
-#define ICR_ITEIE	(1 << 8)	   /* enable tx interrupts */
-#define ICR_IRFIE	(1 << 9)	   /* enable rx interrupts */
-#define ICR_BEIE	(1 << 10)	   /* enable bus error ints */
-#define ICR_SSDIE	(1 << 11)	   /* slave STOP detected int enable */
-#define ICR_ALDIE	(1 << 12)	   /* enable arbitration interrupt */
-#define ICR_SADIE	(1 << 13)	   /* slave address detected int enable */
-#define ICR_UR		(1 << 14)	   /* unit reset */
-
-#define ISR_RWM		(1 << 0)	   /* read/write mode */
-#define ISR_ACKNAK	(1 << 1)	   /* ack/nak status */
-#define ISR_UB		(1 << 2)	   /* unit busy */
-#define ISR_IBB		(1 << 3)	   /* bus busy */
-#define ISR_SSD		(1 << 4)	   /* slave stop detected */
-#define ISR_ALD		(1 << 5)	   /* arbitration loss detected */
-#define ISR_ITE		(1 << 6)	   /* tx buffer empty */
-#define ISR_IRF		(1 << 7)	   /* rx buffer full */
-#define ISR_GCAD	(1 << 8)	   /* general call address detected */
-#define ISR_SAD		(1 << 9)	   /* slave address detected */
-#define ISR_BED		(1 << 10)	   /* bus error no ACK/NAK */
-
-
-/*
- * Serial Audio Controller
- */
-
-#define SACR0		__REG(0x40400000)  /* Global Control Register */
-#define SACR1		__REG(0x40400004)  /* Serial Audio I 2 S/MSB-Justified Control Register */
-#define SASR0		__REG(0x4040000C)  /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
-#define SAIMR		__REG(0x40400014)  /* Serial Audio Interrupt Mask Register */
-#define SAICR		__REG(0x40400018)  /* Serial Audio Interrupt Clear Register */
-#define SADIV		__REG(0x40400060)  /* Audio Clock Divider Register. */
-#define SADR		__REG(0x40400080)  /* Serial Audio Data Register (TX and RX FIFO access Register). */
-
-#define SACR0_RFTH(x)	((x) << 12)	/* Rx FIFO Interrupt or DMA Trigger Threshold */
-#define SACR0_TFTH(x)	((x) << 8)	/* Tx FIFO Interrupt or DMA Trigger Threshold */
-#define SACR0_STRF	(1 << 5)	/* FIFO Select for EFWR Special Function */
-#define SACR0_EFWR	(1 << 4)	/* Enable EFWR Function  */
-#define SACR0_RST	(1 << 3)	/* FIFO, i2s Register Reset */
-#define SACR0_BCKD	(1 << 2) 	/* Bit Clock Direction */
-#define SACR0_ENB	(1 << 0)	/* Enable I2S Link */
-#define SACR1_ENLBF	(1 << 5)	/* Enable Loopback */
-#define SACR1_DRPL	(1 << 4) 	/* Disable Replaying Function */
-#define SACR1_DREC	(1 << 3)	/* Disable Recording Function */
-#define SACR1_AMSL	(1 << 0)	/* Specify Alternate Mode */
-
-#define SASR0_I2SOFF	(1 << 7)	/* Controller Status */
-#define SASR0_ROR	(1 << 6)	/* Rx FIFO Overrun */
-#define SASR0_TUR	(1 << 5)	/* Tx FIFO Underrun */
-#define SASR0_RFS	(1 << 4)	/* Rx FIFO Service Request */
-#define SASR0_TFS	(1 << 3)	/* Tx FIFO Service Request */
-#define SASR0_BSY	(1 << 2)	/* I2S Busy */
-#define SASR0_RNE	(1 << 1)	/* Rx FIFO Not Empty */
-#define SASR0_TNF	(1 << 0) 	/* Tx FIFO Not Empty */
-
-#define SAICR_ROR	(1 << 6)	/* Clear Rx FIFO Overrun Interrupt */
-#define SAICR_TUR	(1 << 5)	/* Clear Tx FIFO Underrun Interrupt */
-
-#define SAIMR_ROR	(1 << 6)	/* Enable Rx FIFO Overrun Condition Interrupt */
-#define SAIMR_TUR	(1 << 5)	/* Enable Tx FIFO Underrun Condition Interrupt */
-#define SAIMR_RFS	(1 << 4)	/* Enable Rx FIFO Service Interrupt */
-#define SAIMR_TFS	(1 << 3)	/* Enable Tx FIFO Service Interrupt */
-
-/*
- * AC97 Controller registers
- */
-
-#define POCR		__REG(0x40500000)  /* PCM Out Control Register */
-#define POCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define POCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define PICR		__REG(0x40500004)  /* PCM In Control Register */
-#define PICR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define PICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MCCR		__REG(0x40500008)  /* Mic In Control Register */
-#define MCCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define MCCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define GCR		__REG(0x4050000C)  /* Global Control Register */
-#ifdef CONFIG_PXA3xx
-#define GCR_CLKBPB	(1 << 31)	/* Internal clock enable */
-#endif
-#define GCR_nDMAEN	(1 << 24)	/* non DMA Enable */
-#define GCR_CDONE_IE	(1 << 19)	/* Command Done Interrupt Enable */
-#define GCR_SDONE_IE	(1 << 18)	/* Status Done Interrupt Enable */
-#define GCR_SECRDY_IEN	(1 << 9)	/* Secondary Ready Interrupt Enable */
-#define GCR_PRIRDY_IEN	(1 << 8)	/* Primary Ready Interrupt Enable */
-#define GCR_SECRES_IEN	(1 << 5)	/* Secondary Resume Interrupt Enable */
-#define GCR_PRIRES_IEN	(1 << 4)	/* Primary Resume Interrupt Enable */
-#define GCR_ACLINK_OFF	(1 << 3)	/* AC-link Shut Off */
-#define GCR_WARM_RST	(1 << 2)	/* AC97 Warm Reset */
-#define GCR_COLD_RST	(1 << 1)	/* AC'97 Cold Reset (0 = active) */
-#define GCR_GIE		(1 << 0)	/* Codec GPI Interrupt Enable */
-
-#define POSR		__REG(0x40500010)  /* PCM Out Status Register */
-#define POSR_FIFOE	(1 << 4)	/* FIFO error */
-#define POSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define PISR		__REG(0x40500014)  /* PCM In Status Register */
-#define PISR_FIFOE	(1 << 4)	/* FIFO error */
-#define PISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define PISR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MCSR		__REG(0x40500018)  /* Mic In Status Register */
-#define MCSR_FIFOE	(1 << 4)	/* FIFO error */
-#define MCSR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define MCSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define GSR		__REG(0x4050001C)  /* Global Status Register */
-#define GSR_CDONE	(1 << 19)	/* Command Done */
-#define GSR_SDONE	(1 << 18)	/* Status Done */
-#define GSR_RDCS	(1 << 15)	/* Read Completion Status */
-#define GSR_BIT3SLT12	(1 << 14)	/* Bit 3 of slot 12 */
-#define GSR_BIT2SLT12	(1 << 13)	/* Bit 2 of slot 12 */
-#define GSR_BIT1SLT12	(1 << 12)	/* Bit 1 of slot 12 */
-#define GSR_SECRES	(1 << 11)	/* Secondary Resume Interrupt */
-#define GSR_PRIRES	(1 << 10)	/* Primary Resume Interrupt */
-#define GSR_SCR		(1 << 9)	/* Secondary Codec Ready */
-#define GSR_PCR		(1 << 8)	/*  Primary Codec Ready */
-#define GSR_MCINT	(1 << 7)	/* Mic In Interrupt */
-#define GSR_POINT	(1 << 6)	/* PCM Out Interrupt */
-#define GSR_PIINT	(1 << 5)	/* PCM In Interrupt */
-#define GSR_ACOFFD	(1 << 3)	/* AC-link Shut Off Done */
-#define GSR_MOINT	(1 << 2)	/* Modem Out Interrupt */
-#define GSR_MIINT	(1 << 1)	/* Modem In Interrupt */
-#define GSR_GSCI	(1 << 0)	/* Codec GPI Status Change Interrupt */
-
-#define CAR		__REG(0x40500020)  /* CODEC Access Register */
-#define CAR_CAIP	(1 << 0)	/* Codec Access In Progress */
-
-#define PCDR		__REG(0x40500040)  /* PCM FIFO Data Register */
-#define MCDR		__REG(0x40500060)  /* Mic-in FIFO Data Register */
-
-#define MOCR		__REG(0x40500100)  /* Modem Out Control Register */
-#define MOCR_FEIE	(1 << 3)	/* FIFO Error */
-#define MOCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MICR		__REG(0x40500108)  /* Modem In Control Register */
-#define MICR_FEIE	(1 << 3)	/* FIFO Error */
-#define MICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MOSR		__REG(0x40500110)  /* Modem Out Status Register */
-#define MOSR_FIFOE	(1 << 4)	/* FIFO error */
-#define MOSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MISR		__REG(0x40500118)  /* Modem In Status Register */
-#define MISR_FIFOE	(1 << 4)	/* FIFO error */
-#define MISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define MISR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MODR		__REG(0x40500140)  /* Modem FIFO Data Register */
-
-#define PAC_REG_BASE	__REG(0x40500200)  /* Primary Audio Codec */
-#define SAC_REG_BASE	__REG(0x40500300)  /* Secondary Audio Codec */
-#define PMC_REG_BASE	__REG(0x40500400)  /* Primary Modem Codec */
-#define SMC_REG_BASE	__REG(0x40500500)  /* Secondary Modem Codec */
-
-
-/*
- * Fast Infrared Communication Port
- */
-
-#define FICP		__REG(0x40800000)  /* Start of FICP area */
-#define ICCR0		__REG(0x40800000)  /* ICP Control Register 0 */
-#define ICCR1		__REG(0x40800004)  /* ICP Control Register 1 */
-#define ICCR2		__REG(0x40800008)  /* ICP Control Register 2 */
-#define ICDR		__REG(0x4080000c)  /* ICP Data Register */
-#define ICSR0		__REG(0x40800014)  /* ICP Status Register 0 */
-#define ICSR1		__REG(0x40800018)  /* ICP Status Register 1 */
-
-#define ICCR0_AME	(1 << 7)	/* Address match enable */
-#define ICCR0_TIE	(1 << 6)	/* Transmit FIFO interrupt enable */
-#define ICCR0_RIE	(1 << 5)	/* Recieve FIFO interrupt enable */
-#define ICCR0_RXE	(1 << 4)	/* Receive enable */
-#define ICCR0_TXE	(1 << 3)	/* Transmit enable */
-#define ICCR0_TUS	(1 << 2)	/* Transmit FIFO underrun select */
-#define ICCR0_LBM	(1 << 1)	/* Loopback mode */
-#define ICCR0_ITR	(1 << 0)	/* IrDA transmission */
-
-#define ICCR2_RXP       (1 << 3)	/* Receive Pin Polarity select */
-#define ICCR2_TXP       (1 << 2)	/* Transmit Pin Polarity select */
-#define ICCR2_TRIG	(3 << 0)	/* Receive FIFO Trigger threshold */
-#define ICCR2_TRIG_8    (0 << 0)	/* 	>= 8 bytes */
-#define ICCR2_TRIG_16   (1 << 0)	/*	>= 16 bytes */
-#define ICCR2_TRIG_32   (2 << 0)	/*	>= 32 bytes */
-
-#ifdef CONFIG_PXA27x
-#define ICSR0_EOC	(1 << 6)	/* DMA End of Descriptor Chain */
-#endif
-#define ICSR0_FRE	(1 << 5)	/* Framing error */
-#define ICSR0_RFS	(1 << 4)	/* Receive FIFO service request */
-#define ICSR0_TFS	(1 << 3)	/* Transnit FIFO service request */
-#define ICSR0_RAB	(1 << 2)	/* Receiver abort */
-#define ICSR0_TUR	(1 << 1)	/* Trunsmit FIFO underun */
-#define ICSR0_EIF	(1 << 0)	/* End/Error in FIFO */
-
-#define ICSR1_ROR	(1 << 6)	/* Receiver FIFO underrun  */
-#define ICSR1_CRE	(1 << 5)	/* CRC error */
-#define ICSR1_EOF	(1 << 4)	/* End of frame */
-#define ICSR1_TNF	(1 << 3)	/* Transmit FIFO not full */
-#define ICSR1_RNE	(1 << 2)	/* Receive FIFO not empty */
-#define ICSR1_TBY	(1 << 1)	/* Tramsmiter busy flag */
-#define ICSR1_RSY	(1 << 0)	/* Recevier synchronized flag */
-
-
-/*
- * Real Time Clock
- */
-
-#define RCNR		__REG(0x40900000)  /* RTC Count Register */
-#define RTAR		__REG(0x40900004)  /* RTC Alarm Register */
-#define RTSR		__REG(0x40900008)  /* RTC Status Register */
-#define RTTR		__REG(0x4090000C)  /* RTC Timer Trim Register */
-#define PIAR		__REG(0x40900038)  /* Periodic Interrupt Alarm Register */
-
-#define RTSR_PICE	(1 << 15)	/* Periodic interrupt count enable */
-#define RTSR_PIALE	(1 << 14)	/* Periodic interrupt Alarm enable */
-#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
-#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
-#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
-#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
-
-
-/*
- * OS Timer & Match Registers
- */
-
-#define OSMR0		__REG(0x40A00000)  /* */
-#define OSMR1		__REG(0x40A00004)  /* */
-#define OSMR2		__REG(0x40A00008)  /* */
-#define OSMR3		__REG(0x40A0000C)  /* */
-#define OSMR4		__REG(0x40A00080)  /* */
-#define OSCR		__REG(0x40A00010)  /* OS Timer Counter Register */
-#define OSCR4		__REG(0x40A00040)  /* OS Timer Counter Register */
-#define OMCR4		__REG(0x40A000C0)  /* */
-#define OSSR		__REG(0x40A00014)  /* OS Timer Status Register */
-#define OWER		__REG(0x40A00018)  /* OS Timer Watchdog Enable Register */
-#define OIER		__REG(0x40A0001C)  /* OS Timer Interrupt Enable Register */
-
-#define OSSR_M3		(1 << 3)	/* Match status channel 3 */
-#define OSSR_M2		(1 << 2)	/* Match status channel 2 */
-#define OSSR_M1		(1 << 1)	/* Match status channel 1 */
-#define OSSR_M0		(1 << 0)	/* Match status channel 0 */
-
-#define OWER_WME	(1 << 0)	/* Watchdog Match Enable */
-
-#define OIER_E3		(1 << 3)	/* Interrupt enable channel 3 */
-#define OIER_E2		(1 << 2)	/* Interrupt enable channel 2 */
-#define OIER_E1		(1 << 1)	/* Interrupt enable channel 1 */
-#define OIER_E0		(1 << 0)	/* Interrupt enable channel 0 */
-
-
-/*
- * Pulse Width Modulator
- */
-
-#define PWM_CTRL0	__REG(0x40B00000)  /* PWM 0 Control Register */
-#define PWM_PWDUTY0	__REG(0x40B00004)  /* PWM 0 Duty Cycle Register */
-#define PWM_PERVAL0	__REG(0x40B00008)  /* PWM 0 Period Control Register */
-
-#define PWM_CTRL1	__REG(0x40C00000)  /* PWM 1Control Register */
-#define PWM_PWDUTY1	__REG(0x40C00004)  /* PWM 1 Duty Cycle Register */
-#define PWM_PERVAL1	__REG(0x40C00008)  /* PWM 1 Period Control Register */
-
-
-/*
- * Interrupt Controller
- */
-
-#define ICIP		__REG(0x40D00000)  /* Interrupt Controller IRQ Pending Register */
-#define ICMR		__REG(0x40D00004)  /* Interrupt Controller Mask Register */
-#define ICLR		__REG(0x40D00008)  /* Interrupt Controller Level Register */
-#define ICFP		__REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
-#define ICPR		__REG(0x40D00010)  /* Interrupt Controller Pending Register */
-#define ICCR		__REG(0x40D00014)  /* Interrupt Controller Control Register */
-
-#define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
-#define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
-#define ICLR2		__REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
-#define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
-#define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
-
-/*
- * General Purpose I/O
- */
-
-#define GPIO0_BASE	((void __iomem *)io_p2v(0x40E00000))
-#define GPIO1_BASE	((void __iomem *)io_p2v(0x40E00004))
-#define GPIO2_BASE	((void __iomem *)io_p2v(0x40E00008))
-#define GPIO3_BASE	((void __iomem *)io_p2v(0x40E00100))
-
-#define GPLR_OFFSET	0x00
-#define GPDR_OFFSET	0x0C
-#define GPSR_OFFSET	0x18
-#define GPCR_OFFSET	0x24
-#define GRER_OFFSET	0x30
-#define GFER_OFFSET	0x3C
-#define GEDR_OFFSET	0x48
-
-#define GPLR0		__REG(0x40E00000)  /* GPIO Pin-Level Register GPIO<31:0> */
-#define GPLR1		__REG(0x40E00004)  /* GPIO Pin-Level Register GPIO<63:32> */
-#define GPLR2		__REG(0x40E00008)  /* GPIO Pin-Level Register GPIO<80:64> */
-
-#define GPDR0		__REG(0x40E0000C)  /* GPIO Pin Direction Register GPIO<31:0> */
-#define GPDR1		__REG(0x40E00010)  /* GPIO Pin Direction Register GPIO<63:32> */
-#define GPDR2		__REG(0x40E00014)  /* GPIO Pin Direction Register GPIO<80:64> */
-
-#define GPSR0		__REG(0x40E00018)  /* GPIO Pin Output Set Register GPIO<31:0> */
-#define GPSR1		__REG(0x40E0001C)  /* GPIO Pin Output Set Register GPIO<63:32> */
-#define GPSR2		__REG(0x40E00020)  /* GPIO Pin Output Set Register GPIO<80:64> */
-
-#define GPCR0		__REG(0x40E00024)  /* GPIO Pin Output Clear Register GPIO<31:0> */
-#define GPCR1		__REG(0x40E00028)  /* GPIO Pin Output Clear Register GPIO <63:32> */
-#define GPCR2		__REG(0x40E0002C)  /* GPIO Pin Output Clear Register GPIO <80:64> */
-
-#define GRER0		__REG(0x40E00030)  /* GPIO Rising-Edge Detect Register GPIO<31:0> */
-#define GRER1		__REG(0x40E00034)  /* GPIO Rising-Edge Detect Register GPIO<63:32> */
-#define GRER2		__REG(0x40E00038)  /* GPIO Rising-Edge Detect Register GPIO<80:64> */
-
-#define GFER0		__REG(0x40E0003C)  /* GPIO Falling-Edge Detect Register GPIO<31:0> */
-#define GFER1		__REG(0x40E00040)  /* GPIO Falling-Edge Detect Register GPIO<63:32> */
-#define GFER2		__REG(0x40E00044)  /* GPIO Falling-Edge Detect Register GPIO<80:64> */
-
-#define GEDR0		__REG(0x40E00048)  /* GPIO Edge Detect Status Register GPIO<31:0> */
-#define GEDR1		__REG(0x40E0004C)  /* GPIO Edge Detect Status Register GPIO<63:32> */
-#define GEDR2		__REG(0x40E00050)  /* GPIO Edge Detect Status Register GPIO<80:64> */
-
-#define GAFR0_L		__REG(0x40E00054)  /* GPIO Alternate Function Select Register GPIO<15:0> */
-#define GAFR0_U		__REG(0x40E00058)  /* GPIO Alternate Function Select Register GPIO<31:16> */
-#define GAFR1_L		__REG(0x40E0005C)  /* GPIO Alternate Function Select Register GPIO<47:32> */
-#define GAFR1_U		__REG(0x40E00060)  /* GPIO Alternate Function Select Register GPIO<63:48> */
-#define GAFR2_L		__REG(0x40E00064)  /* GPIO Alternate Function Select Register GPIO<79:64> */
-#define GAFR2_U		__REG(0x40E00068)  /* GPIO Alternate Function Select Register GPIO<95-80> */
-#define GAFR3_L		__REG(0x40E0006C)  /* GPIO Alternate Function Select Register GPIO<111:96> */
-#define GAFR3_U		__REG(0x40E00070)  /* GPIO Alternate Function Select Register GPIO<127:112> */
-
-#define GPLR3		__REG(0x40E00100)  /* GPIO Pin-Level Register GPIO<127:96> */
-#define GPDR3		__REG(0x40E0010C)  /* GPIO Pin Direction Register GPIO<127:96> */
-#define GPSR3		__REG(0x40E00118)  /* GPIO Pin Output Set Register GPIO<127:96> */
-#define GPCR3		__REG(0x40E00124)  /* GPIO Pin Output Clear Register GPIO<127:96> */
-#define GRER3		__REG(0x40E00130)  /* GPIO Rising-Edge Detect Register GPIO<127:96> */
-#define GFER3		__REG(0x40E0013C)  /* GPIO Falling-Edge Detect Register GPIO<127:96> */
-#define GEDR3		__REG(0x40E00148)  /* GPIO Edge Detect Status Register GPIO<127:96> */
-
-/* More handy macros.  The argument is a literal GPIO number. */
-
-#define GPIO_bit(x)	(1 << ((x) & 0x1f))
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-
-/* Interrupt Controller */
-
-#define _GPLR(x)	__REG2(0x40E00000, ((x) & 0x60) >> 3)
-#define _GPDR(x)	__REG2(0x40E0000C, ((x) & 0x60) >> 3)
-#define _GPSR(x)	__REG2(0x40E00018, ((x) & 0x60) >> 3)
-#define _GPCR(x)	__REG2(0x40E00024, ((x) & 0x60) >> 3)
-#define _GRER(x)	__REG2(0x40E00030, ((x) & 0x60) >> 3)
-#define _GFER(x)	__REG2(0x40E0003C, ((x) & 0x60) >> 3)
-#define _GEDR(x)	__REG2(0x40E00048, ((x) & 0x60) >> 3)
-#define _GAFR(x)	__REG2(0x40E00054, ((x) & 0x70) >> 2)
-
-#define GPLR(x) 	(*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
-#define GPDR(x)		(*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
-#define GPSR(x)		(*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
-#define GPCR(x)		(*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
-#define GRER(x)		(*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
-#define GFER(x)		(*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
-#define GEDR(x)		(*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
-#define GAFR(x)		(*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
-			 ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
-#else
-
-#define GPLR(x)		__REG2(0x40E00000, ((x) & 0x60) >> 3)
-#define GPDR(x)		__REG2(0x40E0000C, ((x) & 0x60) >> 3)
-#define GPSR(x)		__REG2(0x40E00018, ((x) & 0x60) >> 3)
-#define GPCR(x)		__REG2(0x40E00024, ((x) & 0x60) >> 3)
-#define GRER(x)		__REG2(0x40E00030, ((x) & 0x60) >> 3)
-#define GFER(x)		__REG2(0x40E0003C, ((x) & 0x60) >> 3)
-#define GEDR(x)		__REG2(0x40E00048, ((x) & 0x60) >> 3)
-#define GAFR(x)		__REG2(0x40E00054, ((x) & 0x70) >> 2)
-
-#endif
-
-/*
- * Power Manager - see pxa2xx-regs.h
- */
-
-/*
- * SSP Serial Port Registers - see include/asm-arm/arch-pxa/regs-ssp.h
- */
-
-/*
- * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h
- */
-
-/*
- * Core Clock - see include/asm-arm/arch-pxa/pxa2xx-regs.h
- */
-
-#ifdef CONFIG_PXA27x
-
-/* Camera Interface */
-#define CICR0		__REG(0x50000000)
-#define CICR1		__REG(0x50000004)
-#define CICR2		__REG(0x50000008)
-#define CICR3		__REG(0x5000000C)
-#define CICR4		__REG(0x50000010)
-#define CISR		__REG(0x50000014)
-#define CIFR		__REG(0x50000018)
-#define CITOR		__REG(0x5000001C)
-#define CIBR0		__REG(0x50000028)
-#define CIBR1		__REG(0x50000030)
-#define CIBR2		__REG(0x50000038)
-
-#define CICR0_DMAEN	(1 << 31)	/* DMA request enable */
-#define CICR0_PAR_EN	(1 << 30)	/* Parity enable */
-#define CICR0_SL_CAP_EN	(1 << 29)	/* Capture enable for slave mode */
-#define CICR0_ENB	(1 << 28)	/* Camera interface enable */
-#define CICR0_DIS	(1 << 27)	/* Camera interface disable */
-#define CICR0_SIM	(0x7 << 24)	/* Sensor interface mode mask */
-#define CICR0_TOM	(1 << 9)	/* Time-out mask */
-#define CICR0_RDAVM	(1 << 8)	/* Receive-data-available mask */
-#define CICR0_FEM	(1 << 7)	/* FIFO-empty mask */
-#define CICR0_EOLM	(1 << 6)	/* End-of-line mask */
-#define CICR0_PERRM	(1 << 5)	/* Parity-error mask */
-#define CICR0_QDM	(1 << 4)	/* Quick-disable mask */
-#define CICR0_CDM	(1 << 3)	/* Disable-done mask */
-#define CICR0_SOFM	(1 << 2)	/* Start-of-frame mask */
-#define CICR0_EOFM	(1 << 1)	/* End-of-frame mask */
-#define CICR0_FOM	(1 << 0)	/* FIFO-overrun mask */
-
-#define CICR1_TBIT	(1 << 31)	/* Transparency bit */
-#define CICR1_RGBT_CONV	(0x3 << 29)	/* RGBT conversion mask */
-#define CICR1_PPL	(0x7ff << 15)	/* Pixels per line mask */
-#define CICR1_RGB_CONV	(0x7 << 12)	/* RGB conversion mask */
-#define CICR1_RGB_F	(1 << 11)	/* RGB format */
-#define CICR1_YCBCR_F	(1 << 10)	/* YCbCr format */
-#define CICR1_RGB_BPP	(0x7 << 7)	/* RGB bis per pixel mask */
-#define CICR1_RAW_BPP	(0x3 << 5)	/* Raw bis per pixel mask */
-#define CICR1_COLOR_SP	(0x3 << 3)	/* Color space mask */
-#define CICR1_DW	(0x7 << 0)	/* Data width mask */
-
-#define CICR2_BLW	(0xff << 24)	/* Beginning-of-line pixel clock
-					   wait count mask */
-#define CICR2_ELW	(0xff << 16)	/* End-of-line pixel clock
-					   wait count mask */
-#define CICR2_HSW	(0x3f << 10)	/* Horizontal sync pulse width mask */
-#define CICR2_BFPW	(0x3f << 3)	/* Beginning-of-frame pixel clock
-					   wait count mask */
-#define CICR2_FSW	(0x7 << 0)	/* Frame stabilization
-					   wait count mask */
-
-#define CICR3_BFW	(0xff << 24)	/* Beginning-of-frame line clock
-					   wait count mask */
-#define CICR3_EFW	(0xff << 16)	/* End-of-frame line clock
-					   wait count mask */
-#define CICR3_VSW	(0x3f << 10)	/* Vertical sync pulse width mask */
-#define CICR3_BFPW	(0x3f << 3)	/* Beginning-of-frame pixel clock
-					   wait count mask */
-#define CICR3_LPF	(0x7ff << 0)	/* Lines per frame mask */
-
-#define CICR4_MCLK_DLY	(0x3 << 24)	/* MCLK Data Capture Delay mask */
-#define CICR4_PCLK_EN	(1 << 23)	/* Pixel clock enable */
-#define CICR4_PCP	(1 << 22)	/* Pixel clock polarity */
-#define CICR4_HSP	(1 << 21)	/* Horizontal sync polarity */
-#define CICR4_VSP	(1 << 20)	/* Vertical sync polarity */
-#define CICR4_MCLK_EN	(1 << 19)	/* MCLK enable */
-#define CICR4_FR_RATE	(0x7 << 8)	/* Frame rate mask */
-#define CICR4_DIV	(0xff << 0)	/* Clock divisor mask */
-
-#define CISR_FTO	(1 << 15)	/* FIFO time-out */
-#define CISR_RDAV_2	(1 << 14)	/* Channel 2 receive data available */
-#define CISR_RDAV_1	(1 << 13)	/* Channel 1 receive data available */
-#define CISR_RDAV_0	(1 << 12)	/* Channel 0 receive data available */
-#define CISR_FEMPTY_2	(1 << 11)	/* Channel 2 FIFO empty */
-#define CISR_FEMPTY_1	(1 << 10)	/* Channel 1 FIFO empty */
-#define CISR_FEMPTY_0	(1 << 9)	/* Channel 0 FIFO empty */
-#define CISR_EOL	(1 << 8)	/* End of line */
-#define CISR_PAR_ERR	(1 << 7)	/* Parity error */
-#define CISR_CQD	(1 << 6)	/* Camera interface quick disable */
-#define CISR_CDD	(1 << 5)	/* Camera interface disable done */
-#define CISR_SOF	(1 << 4)	/* Start of frame */
-#define CISR_EOF	(1 << 3)	/* End of frame */
-#define CISR_IFO_2	(1 << 2)	/* FIFO overrun for Channel 2 */
-#define CISR_IFO_1	(1 << 1)	/* FIFO overrun for Channel 1 */
-#define CISR_IFO_0	(1 << 0)	/* FIFO overrun for Channel 0 */
-
-#define CIFR_FLVL2	(0x7f << 23)	/* FIFO 2 level mask */
-#define CIFR_FLVL1	(0x7f << 16)	/* FIFO 1 level mask */
-#define CIFR_FLVL0	(0xff << 8)	/* FIFO 0 level mask */
-#define CIFR_THL_0	(0x3 << 4)	/* Threshold Level for Channel 0 FIFO */
-#define CIFR_RESET_F	(1 << 3)	/* Reset input FIFOs */
-#define CIFR_FEN2	(1 << 2)	/* FIFO enable for channel 2 */
-#define CIFR_FEN1	(1 << 1)	/* FIFO enable for channel 1 */
-#define CIFR_FEN0	(1 << 0)	/* FIFO enable for channel 0 */
-
-#define SRAM_SIZE		0x40000 /* 4x64K  */
-
-#define SRAM_MEM_PHYS		0x5C000000
-
-#define IMPMCR		__REG(0x58000000) /* IM Power Management Control Reg */
-#define IMPMSR		__REG(0x58000008) /* IM Power Management Status Reg */
-
-#define IMPMCR_PC3		(0x3 << 22) /* Bank 3 Power Control */
-#define IMPMCR_PC3_RUN_MODE	(0x0 << 22) /*   Run mode */
-#define IMPMCR_PC3_STANDBY_MODE	(0x1 << 22) /*   Standby mode */
-#define IMPMCR_PC3_AUTO_MODE	(0x3 << 22) /*   Automatically controlled */
-
-#define IMPMCR_PC2		(0x3 << 20) /* Bank 2 Power Control */
-#define IMPMCR_PC2_RUN_MODE	(0x0 << 20) /*   Run mode */
-#define IMPMCR_PC2_STANDBY_MODE	(0x1 << 20) /*   Standby mode */
-#define IMPMCR_PC2_AUTO_MODE	(0x3 << 20) /*   Automatically controlled */
-
-#define IMPMCR_PC1		(0x3 << 18) /* Bank 1 Power Control */
-#define IMPMCR_PC1_RUN_MODE	(0x0 << 18) /*   Run mode */
-#define IMPMCR_PC1_STANDBY_MODE	(0x1 << 18) /*   Standby mode */
-#define IMPMCR_PC1_AUTO_MODE	(0x3 << 18) /*   Automatically controlled */
-
-#define IMPMCR_PC0		(0x3 << 16) /* Bank 0 Power Control */
-#define IMPMCR_PC0_RUN_MODE	(0x0 << 16) /*   Run mode */
-#define IMPMCR_PC0_STANDBY_MODE	(0x1 << 16) /*   Standby mode */
-#define IMPMCR_PC0_AUTO_MODE	(0x3 << 16) /*   Automatically controlled */
-
-#define IMPMCR_AW3		(1 << 11) /* Bank 3 Automatic Wake-up enable */
-#define IMPMCR_AW2		(1 << 10) /* Bank 2 Automatic Wake-up enable */
-#define IMPMCR_AW1		(1 << 9)  /* Bank 1 Automatic Wake-up enable */
-#define IMPMCR_AW0		(1 << 8)  /* Bank 0 Automatic Wake-up enable */
-
-#define IMPMCR_DST		(0xFF << 0) /* Delay Standby Time, ms */
-
-#define IMPMSR_PS3		(0x3 << 6) /* Bank 3 Power Status: */
-#define IMPMSR_PS3_RUN_MODE	(0x0 << 6) /*    Run mode */
-#define IMPMSR_PS3_STANDBY_MODE	(0x1 << 6) /*    Standby mode */
-
-#define IMPMSR_PS2		(0x3 << 4) /* Bank 2 Power Status: */
-#define IMPMSR_PS2_RUN_MODE	(0x0 << 4) /*    Run mode */
-#define IMPMSR_PS2_STANDBY_MODE	(0x1 << 4) /*    Standby mode */
-
-#define IMPMSR_PS1		(0x3 << 2) /* Bank 1 Power Status: */
-#define IMPMSR_PS1_RUN_MODE	(0x0 << 2) /*    Run mode */
-#define IMPMSR_PS1_STANDBY_MODE	(0x1 << 2) /*    Standby mode */
-
-#define IMPMSR_PS0		(0x3 << 0) /* Bank 0 Power Status: */
-#define IMPMSR_PS0_RUN_MODE	(0x0 << 0) /*    Run mode */
-#define IMPMSR_PS0_STANDBY_MODE	(0x1 << 0) /*    Standby mode */
-
-#endif
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-/*
- * UHC: USB Host Controller (OHCI-like) register definitions
- */
-#define UHC_BASE_PHYS	(0x4C000000)
-#define UHCREV		__REG(0x4C000000) /* UHC HCI Spec Revision */
-#define UHCHCON		__REG(0x4C000004) /* UHC Host Control Register */
-#define UHCCOMS		__REG(0x4C000008) /* UHC Command Status Register */
-#define UHCINTS		__REG(0x4C00000C) /* UHC Interrupt Status Register */
-#define UHCINTE		__REG(0x4C000010) /* UHC Interrupt Enable */
-#define UHCINTD		__REG(0x4C000014) /* UHC Interrupt Disable */
-#define UHCHCCA		__REG(0x4C000018) /* UHC Host Controller Comm. Area */
-#define UHCPCED		__REG(0x4C00001C) /* UHC Period Current Endpt Descr */
-#define UHCCHED		__REG(0x4C000020) /* UHC Control Head Endpt Descr */
-#define UHCCCED		__REG(0x4C000024) /* UHC Control Current Endpt Descr */
-#define UHCBHED		__REG(0x4C000028) /* UHC Bulk Head Endpt Descr */
-#define UHCBCED		__REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */
-#define UHCDHEAD	__REG(0x4C000030) /* UHC Done Head */
-#define UHCFMI		__REG(0x4C000034) /* UHC Frame Interval */
-#define UHCFMR		__REG(0x4C000038) /* UHC Frame Remaining */
-#define UHCFMN		__REG(0x4C00003C) /* UHC Frame Number */
-#define UHCPERS		__REG(0x4C000040) /* UHC Periodic Start */
-#define UHCLS		__REG(0x4C000044) /* UHC Low Speed Threshold */
-
-#define UHCRHDA		__REG(0x4C000048) /* UHC Root Hub Descriptor A */
-#define UHCRHDA_NOCP	(1 << 12)	/* No over current protection */
-
-#define UHCRHDB		__REG(0x4C00004C) /* UHC Root Hub Descriptor B */
-#define UHCRHS		__REG(0x4C000050) /* UHC Root Hub Status */
-#define UHCRHPS1	__REG(0x4C000054) /* UHC Root Hub Port 1 Status */
-#define UHCRHPS2	__REG(0x4C000058) /* UHC Root Hub Port 2 Status */
-#define UHCRHPS3	__REG(0x4C00005C) /* UHC Root Hub Port 3 Status */
-
-#define UHCSTAT		__REG(0x4C000060) /* UHC Status Register */
-#define UHCSTAT_UPS3	(1 << 16)	/* USB Power Sense Port3 */
-#define UHCSTAT_SBMAI	(1 << 15)	/* System Bus Master Abort Interrupt*/
-#define UHCSTAT_SBTAI	(1 << 14)	/* System Bus Target Abort Interrupt*/
-#define UHCSTAT_UPRI	(1 << 13)	/* USB Port Resume Interrupt */
-#define UHCSTAT_UPS2	(1 << 12)	/* USB Power Sense Port 2 */
-#define UHCSTAT_UPS1	(1 << 11)	/* USB Power Sense Port 1 */
-#define UHCSTAT_HTA	(1 << 10)	/* HCI Target Abort */
-#define UHCSTAT_HBA	(1 << 8)	/* HCI Buffer Active */
-#define UHCSTAT_RWUE	(1 << 7)	/* HCI Remote Wake Up Event */
-
-#define UHCHR           __REG(0x4C000064) /* UHC Reset Register */
-#define UHCHR_SSEP3	(1 << 11)	/* Sleep Standby Enable for Port3 */
-#define UHCHR_SSEP2	(1 << 10)	/* Sleep Standby Enable for Port2 */
-#define UHCHR_SSEP1	(1 << 9)	/* Sleep Standby Enable for Port1 */
-#define UHCHR_PCPL	(1 << 7)	/* Power control polarity low */
-#define UHCHR_PSPL	(1 << 6)	/* Power sense polarity low */
-#define UHCHR_SSE	(1 << 5)	/* Sleep Standby Enable */
-#define UHCHR_UIT	(1 << 4)	/* USB Interrupt Test */
-#define UHCHR_SSDC	(1 << 3)	/* Simulation Scale Down Clock */
-#define UHCHR_CGR	(1 << 2)	/* Clock Generation Reset */
-#define UHCHR_FHR	(1 << 1)	/* Force Host Controller Reset */
-#define UHCHR_FSBIR	(1 << 0)	/* Force System Bus Iface Reset */
-
-#define UHCHIE          __REG(0x4C000068) /* UHC Interrupt Enable Register*/
-#define UHCHIE_UPS3IE	(1 << 14)	/* Power Sense Port3 IntEn */
-#define UHCHIE_UPRIE	(1 << 13)	/* Port Resume IntEn */
-#define UHCHIE_UPS2IE	(1 << 12)	/* Power Sense Port2 IntEn */
-#define UHCHIE_UPS1IE	(1 << 11)	/* Power Sense Port1 IntEn */
-#define UHCHIE_TAIE	(1 << 10)	/* HCI Interface Transfer Abort
-					   Interrupt Enable*/
-#define UHCHIE_HBAIE	(1 << 8)	/* HCI Buffer Active IntEn */
-#define UHCHIE_RWIE	(1 << 7)	/* Remote Wake-up IntEn */
-
-#define UHCHIT          __REG(0x4C00006C) /* UHC Interrupt Test register */
-
-#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
-
-/* PWRMODE register M field values */
-
-#define PWRMODE_IDLE		0x1
-#define PWRMODE_STANDBY		0x2
-#define PWRMODE_SLEEP		0x3
-#define PWRMODE_DEEPSLEEP	0x7
-
-#endif
diff --git a/include/asm-arm/arch-pxa/pxa2xx-regs.h b/include/asm-arm/arch-pxa/pxa2xx-regs.h
deleted file mode 100644
index 73e0a32..0000000
--- a/include/asm-arm/arch-pxa/pxa2xx-regs.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/pxa2xx-regs.h
- *
- *  Taken from pxa-regs.h by Russell King
- *
- *  Author:	Nicolas Pitre
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PXA2XX_REGS_H
-#define __PXA2XX_REGS_H
-
-/*
- * Memory controller
- */
-
-#define MDCNFG		__REG(0x48000000)  /* SDRAM Configuration Register 0 */
-#define MDREFR		__REG(0x48000004)  /* SDRAM Refresh Control Register */
-#define MSC0		__REG(0x48000008)  /* Static Memory Control Register 0 */
-#define MSC1		__REG(0x4800000C)  /* Static Memory Control Register 1 */
-#define MSC2		__REG(0x48000010)  /* Static Memory Control Register 2 */
-#define MECR		__REG(0x48000014)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
-#define SXLCR		__REG(0x48000018)  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
-#define SXCNFG		__REG(0x4800001C)  /* Synchronous Static Memory Control Register */
-#define SXMRS		__REG(0x48000024)  /* MRS value to be written to Synchronous Flash or SMROM */
-#define MCMEM0		__REG(0x48000028)  /* Card interface Common Memory Space Socket 0 Timing */
-#define MCMEM1		__REG(0x4800002C)  /* Card interface Common Memory Space Socket 1 Timing */
-#define MCATT0		__REG(0x48000030)  /* Card interface Attribute Space Socket 0 Timing Configuration */
-#define MCATT1		__REG(0x48000034)  /* Card interface Attribute Space Socket 1 Timing Configuration */
-#define MCIO0		__REG(0x48000038)  /* Card interface I/O Space Socket 0 Timing Configuration */
-#define MCIO1		__REG(0x4800003C)  /* Card interface I/O Space Socket 1 Timing Configuration */
-#define MDMRS		__REG(0x48000040)  /* MRS value to be written to SDRAM */
-#define BOOT_DEF	__REG(0x48000044)  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
-
-/*
- * More handy macros for PCMCIA
- *
- * Arg is socket number
- */
-#define MCMEM(s)	__REG2(0x48000028, (s)<<2 )  /* Card interface Common Memory Space Socket s Timing */
-#define MCATT(s)	__REG2(0x48000030, (s)<<2 )  /* Card interface Attribute Space Socket s Timing Configuration */
-#define MCIO(s)		__REG2(0x48000038, (s)<<2 )  /* Card interface I/O Space Socket s Timing Configuration */
-
-/* MECR register defines */
-#define MECR_NOS	(1 << 0)	/* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
-#define MECR_CIT	(1 << 1)	/* Card Is There: 0 -> no card, 1 -> card inserted */
-
-#define MDREFR_K0DB4	(1 << 29)	/* SDCLK0 Divide by 4 Control/Status */
-#define MDREFR_K2FREE	(1 << 25)	/* SDRAM Free-Running Control */
-#define MDREFR_K1FREE	(1 << 24)	/* SDRAM Free-Running Control */
-#define MDREFR_K0FREE	(1 << 23)	/* SDRAM Free-Running Control */
-#define MDREFR_SLFRSH	(1 << 22)	/* SDRAM Self-Refresh Control/Status */
-#define MDREFR_APD	(1 << 20)	/* SDRAM/SSRAM Auto-Power-Down Enable */
-#define MDREFR_K2DB2	(1 << 19)	/* SDCLK2 Divide by 2 Control/Status */
-#define MDREFR_K2RUN	(1 << 18)	/* SDCLK2 Run Control/Status */
-#define MDREFR_K1DB2	(1 << 17)	/* SDCLK1 Divide by 2 Control/Status */
-#define MDREFR_K1RUN	(1 << 16)	/* SDCLK1 Run Control/Status */
-#define MDREFR_E1PIN	(1 << 15)	/* SDCKE1 Level Control/Status */
-#define MDREFR_K0DB2	(1 << 14)	/* SDCLK0 Divide by 2 Control/Status */
-#define MDREFR_K0RUN	(1 << 13)	/* SDCLK0 Run Control/Status */
-#define MDREFR_E0PIN	(1 << 12)	/* SDCKE0 Level Control/Status */
-
-
-#ifdef CONFIG_PXA27x
-
-#define ARB_CNTRL	__REG(0x48000048)  /* Arbiter Control Register */
-
-#define ARB_DMA_SLV_PARK	(1<<31)	   /* Be parked with DMA slave when idle */
-#define ARB_CI_PARK		(1<<30)	   /* Be parked with Camera Interface when idle */
-#define ARB_EX_MEM_PARK 	(1<<29)	   /* Be parked with external MEMC when idle */
-#define ARB_INT_MEM_PARK	(1<<28)	   /* Be parked with internal MEMC when idle */
-#define ARB_USB_PARK		(1<<27)	   /* Be parked with USB when idle */
-#define ARB_LCD_PARK		(1<<26)	   /* Be parked with LCD when idle */
-#define ARB_DMA_PARK		(1<<25)	   /* Be parked with DMA when idle */
-#define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
-#define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
-
-#endif
-
-
-/*
- * Power Manager
- */
-
-#define PMCR		__REG(0x40F00000)  /* Power Manager Control Register */
-#define PSSR		__REG(0x40F00004)  /* Power Manager Sleep Status Register */
-#define PSPR		__REG(0x40F00008)  /* Power Manager Scratch Pad Register */
-#define PWER		__REG(0x40F0000C)  /* Power Manager Wake-up Enable Register */
-#define PRER		__REG(0x40F00010)  /* Power Manager GPIO Rising-Edge Detect Enable Register */
-#define PFER		__REG(0x40F00014)  /* Power Manager GPIO Falling-Edge Detect Enable Register */
-#define PEDR		__REG(0x40F00018)  /* Power Manager GPIO Edge Detect Status Register */
-#define PCFR		__REG(0x40F0001C)  /* Power Manager General Configuration Register */
-#define PGSR0		__REG(0x40F00020)  /* Power Manager GPIO Sleep State Register for GP[31-0] */
-#define PGSR1		__REG(0x40F00024)  /* Power Manager GPIO Sleep State Register for GP[63-32] */
-#define PGSR2		__REG(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
-#define PGSR3		__REG(0x40F0002C)  /* Power Manager GPIO Sleep State Register for GP[118-96] */
-#define RCSR		__REG(0x40F00030)  /* Reset Controller Status Register */
-
-#define PSLR		__REG(0x40F00034)	/* Power Manager Sleep Config Register */
-#define PSTR		__REG(0x40F00038)	/* Power Manager Standby Config Register */
-#define PSNR		__REG(0x40F0003C)	/* Power Manager Sense Config Register */
-#define PVCR		__REG(0x40F00040)	/* Power Manager VoltageControl Register */
-#define PKWR		__REG(0x40F00050)	/* Power Manager KB Wake-up Enable Reg */
-#define PKSR		__REG(0x40F00054)	/* Power Manager KB Level-Detect Register */
-#define PCMD(x)	__REG2(0x40F00080, (x)<<2)
-#define PCMD0	__REG(0x40F00080 + 0 * 4)
-#define PCMD1	__REG(0x40F00080 + 1 * 4)
-#define PCMD2	__REG(0x40F00080 + 2 * 4)
-#define PCMD3	__REG(0x40F00080 + 3 * 4)
-#define PCMD4	__REG(0x40F00080 + 4 * 4)
-#define PCMD5	__REG(0x40F00080 + 5 * 4)
-#define PCMD6	__REG(0x40F00080 + 6 * 4)
-#define PCMD7	__REG(0x40F00080 + 7 * 4)
-#define PCMD8	__REG(0x40F00080 + 8 * 4)
-#define PCMD9	__REG(0x40F00080 + 9 * 4)
-#define PCMD10	__REG(0x40F00080 + 10 * 4)
-#define PCMD11	__REG(0x40F00080 + 11 * 4)
-#define PCMD12	__REG(0x40F00080 + 12 * 4)
-#define PCMD13	__REG(0x40F00080 + 13 * 4)
-#define PCMD14	__REG(0x40F00080 + 14 * 4)
-#define PCMD15	__REG(0x40F00080 + 15 * 4)
-#define PCMD16	__REG(0x40F00080 + 16 * 4)
-#define PCMD17	__REG(0x40F00080 + 17 * 4)
-#define PCMD18	__REG(0x40F00080 + 18 * 4)
-#define PCMD19	__REG(0x40F00080 + 19 * 4)
-#define PCMD20	__REG(0x40F00080 + 20 * 4)
-#define PCMD21	__REG(0x40F00080 + 21 * 4)
-#define PCMD22	__REG(0x40F00080 + 22 * 4)
-#define PCMD23	__REG(0x40F00080 + 23 * 4)
-#define PCMD24	__REG(0x40F00080 + 24 * 4)
-#define PCMD25	__REG(0x40F00080 + 25 * 4)
-#define PCMD26	__REG(0x40F00080 + 26 * 4)
-#define PCMD27	__REG(0x40F00080 + 27 * 4)
-#define PCMD28	__REG(0x40F00080 + 28 * 4)
-#define PCMD29	__REG(0x40F00080 + 29 * 4)
-#define PCMD30	__REG(0x40F00080 + 30 * 4)
-#define PCMD31	__REG(0x40F00080 + 31 * 4)
-
-#define PCMD_MBC	(1<<12)
-#define PCMD_DCE	(1<<11)
-#define PCMD_LC	(1<<10)
-/* FIXME:  PCMD_SQC need be checked.   */
-#define PCMD_SQC	(3<<8)	/* currently only bit 8 is changeable,
-				   bit 9 should be 0 all day. */
-#define PVCR_VCSA	(0x1<<14)
-#define PVCR_CommandDelay (0xf80)
-#define PCFR_PI2C_EN	(0x1 << 6)
-
-#define PSSR_OTGPH	(1 << 6)	/* OTG Peripheral control Hold */
-#define PSSR_RDH	(1 << 5)	/* Read Disable Hold */
-#define PSSR_PH		(1 << 4)	/* Peripheral Control Hold */
-#define PSSR_STS	(1 << 3)	/* Standby Mode Status */
-#define PSSR_VFS	(1 << 2)	/* VDD Fault Status */
-#define PSSR_BFS	(1 << 1)	/* Battery Fault Status */
-#define PSSR_SSS	(1 << 0)	/* Software Sleep Status */
-
-#define PSLR_SL_ROD	(1 << 20)	/* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
-
-#define PCFR_RO		(1 << 15)	/* RDH Override */
-#define PCFR_PO		(1 << 14)	/* PH Override */
-#define PCFR_GPROD	(1 << 12)	/* GPIO nRESET_OUT Disable */
-#define PCFR_L1_EN	(1 << 11)	/* Sleep Mode L1 converter Enable */
-#define PCFR_FVC	(1 << 10)	/* Frequency/Voltage Change */
-#define PCFR_DC_EN	(1 << 7)	/* Sleep/deep-sleep DC-DC Converter Enable */
-#define PCFR_PI2CEN	(1 << 6)	/* Enable PI2C controller */
-#define PCFR_GPR_EN	(1 << 4)	/* nRESET_GPIO Pin Enable */
-#define PCFR_DS		(1 << 3)	/* Deep Sleep Mode */
-#define PCFR_FS		(1 << 2)	/* Float Static Chip Selects */
-#define PCFR_FP		(1 << 1)	/* Float PCMCIA controls */
-#define PCFR_OPDE	(1 << 0)	/* 3.6864 MHz oscillator power-down enable */
-
-#define RCSR_GPR	(1 << 3)	/* GPIO Reset */
-#define RCSR_SMR	(1 << 2)	/* Sleep Mode */
-#define RCSR_WDR	(1 << 1)	/* Watchdog Reset */
-#define RCSR_HWR	(1 << 0)	/* Hardware Reset */
-
-#define PWER_GPIO(Nb)	(1 << Nb)	/* GPIO [0..15] wake-up enable     */
-#define PWER_GPIO0	PWER_GPIO (0)	/* GPIO  [0] wake-up enable        */
-#define PWER_GPIO1	PWER_GPIO (1)	/* GPIO  [1] wake-up enable        */
-#define PWER_GPIO2	PWER_GPIO (2)	/* GPIO  [2] wake-up enable        */
-#define PWER_GPIO3	PWER_GPIO (3)	/* GPIO  [3] wake-up enable        */
-#define PWER_GPIO4	PWER_GPIO (4)	/* GPIO  [4] wake-up enable        */
-#define PWER_GPIO5	PWER_GPIO (5)	/* GPIO  [5] wake-up enable        */
-#define PWER_GPIO6	PWER_GPIO (6)	/* GPIO  [6] wake-up enable        */
-#define PWER_GPIO7	PWER_GPIO (7)	/* GPIO  [7] wake-up enable        */
-#define PWER_GPIO8	PWER_GPIO (8)	/* GPIO  [8] wake-up enable        */
-#define PWER_GPIO9	PWER_GPIO (9)	/* GPIO  [9] wake-up enable        */
-#define PWER_GPIO10	PWER_GPIO (10)	/* GPIO [10] wake-up enable        */
-#define PWER_GPIO11	PWER_GPIO (11)	/* GPIO [11] wake-up enable        */
-#define PWER_GPIO12	PWER_GPIO (12)	/* GPIO [12] wake-up enable        */
-#define PWER_GPIO13	PWER_GPIO (13)	/* GPIO [13] wake-up enable        */
-#define PWER_GPIO14	PWER_GPIO (14)	/* GPIO [14] wake-up enable        */
-#define PWER_GPIO15	PWER_GPIO (15)	/* GPIO [15] wake-up enable        */
-#define PWER_RTC	0x80000000	/* RTC alarm wake-up enable        */
-
-/*
- * PXA2xx specific Core clock definitions
- */
-#define CCCR		__REG(0x41300000)  /* Core Clock Configuration Register */
-#define CCSR		__REG(0x4130000C)  /* Core Clock Status Register */
-#define CKEN		__REG(0x41300004)  /* Clock Enable Register */
-#define OSCC		__REG(0x41300008)  /* Oscillator Configuration Register */
-
-#define CCCR_N_MASK	0x0380	/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
-#define CCCR_M_MASK	0x0060	/* Memory Frequency to Run Mode Frequency Multiplier */
-#define CCCR_L_MASK	0x001f	/* Crystal Frequency to Memory Frequency Multiplier */
-
-#define CKEN_AC97CONF   (31)    /* AC97 Controller Configuration */
-#define CKEN_CAMERA	(24)	/* Camera Interface Clock Enable */
-#define CKEN_SSP1	(23)	/* SSP1 Unit Clock Enable */
-#define CKEN_MEMC	(22)	/* Memory Controller Clock Enable */
-#define CKEN_MEMSTK	(21)	/* Memory Stick Host Controller */
-#define CKEN_IM		(20)	/* Internal Memory Clock Enable */
-#define CKEN_KEYPAD	(19)	/* Keypad Interface Clock Enable */
-#define CKEN_USIM	(18)	/* USIM Unit Clock Enable */
-#define CKEN_MSL	(17)	/* MSL Unit Clock Enable */
-#define CKEN_LCD	(16)	/* LCD Unit Clock Enable */
-#define CKEN_PWRI2C	(15)	/* PWR I2C Unit Clock Enable */
-#define CKEN_I2C	(14)	/* I2C Unit Clock Enable */
-#define CKEN_FICP	(13)	/* FICP Unit Clock Enable */
-#define CKEN_MMC	(12)	/* MMC Unit Clock Enable */
-#define CKEN_USB	(11)	/* USB Unit Clock Enable */
-#define CKEN_ASSP	(10)	/* ASSP (SSP3) Clock Enable */
-#define CKEN_USBHOST	(10)	/* USB Host Unit Clock Enable */
-#define CKEN_OSTIMER	(9)	/* OS Timer Unit Clock Enable */
-#define CKEN_NSSP	(9)	/* NSSP (SSP2) Clock Enable */
-#define CKEN_I2S	(8)	/* I2S Unit Clock Enable */
-#define CKEN_BTUART	(7)	/* BTUART Unit Clock Enable */
-#define CKEN_FFUART	(6)	/* FFUART Unit Clock Enable */
-#define CKEN_STUART	(5)	/* STUART Unit Clock Enable */
-#define CKEN_HWUART	(4)	/* HWUART Unit Clock Enable */
-#define CKEN_SSP3	(4)	/* SSP3 Unit Clock Enable */
-#define CKEN_SSP	(3)	/* SSP Unit Clock Enable */
-#define CKEN_SSP2	(3)	/* SSP2 Unit Clock Enable */
-#define CKEN_AC97	(2)	/* AC97 Unit Clock Enable */
-#define CKEN_PWM1	(1)	/* PWM1 Clock Enable */
-#define CKEN_PWM0	(0)	/* PWM0 Clock Enable */
-
-#define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
-#define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */
-
-#endif
diff --git a/include/asm-arm/arch-pxa/pxa3xx-regs.h b/include/asm-arm/arch-pxa/pxa3xx-regs.h
deleted file mode 100644
index fe9364c..0000000
--- a/include/asm-arm/arch-pxa/pxa3xx-regs.h
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/pxa3xx-regs.h
- *
- * PXA3xx specific register definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_PXA3XX_REGS_H
-#define __ASM_ARCH_PXA3XX_REGS_H
-
-/*
- * Oscillator Configuration Register (OSCC)
- */
-#define OSCC           __REG(0x41350000)  /* Oscillator Configuration Register */
-
-#define OSCC_PEN       (1 << 11)       /* 13MHz POUT */
-
-
-/*
- * Service Power Management Unit (MPMU)
- */
-#define PMCR		__REG(0x40F50000)	/* Power Manager Control Register */
-#define PSR		__REG(0x40F50004)	/* Power Manager S2 Status Register */
-#define PSPR		__REG(0x40F50008)	/* Power Manager Scratch Pad Register */
-#define PCFR		__REG(0x40F5000C)	/* Power Manager General Configuration Register */
-#define PWER		__REG(0x40F50010)	/* Power Manager Wake-up Enable Register */
-#define PWSR		__REG(0x40F50014)	/* Power Manager Wake-up Status Register */
-#define PECR		__REG(0x40F50018)	/* Power Manager EXT_WAKEUP[1:0] Control Register */
-#define DCDCSR		__REG(0x40F50080)	/* DC-DC Controller Status Register */
-#define PVCR		__REG(0x40F50100)	/* Power Manager Voltage Change Control Register */
-#define PCMD(x)		__REG(0x40F50110 + ((x) << 2))
-
-/*
- * Slave Power Managment Unit
- */
-#define ASCR		__REG(0x40f40000)	/* Application Subsystem Power Status/Configuration */
-#define ARSR		__REG(0x40f40004)	/* Application Subsystem Reset Status */
-#define AD3ER		__REG(0x40f40008)	/* Application Subsystem Wake-Up from D3 Enable */
-#define AD3SR		__REG(0x40f4000c)	/* Application Subsystem Wake-Up from D3 Status */
-#define AD2D0ER		__REG(0x40f40010)	/* Application Subsystem Wake-Up from D2 to D0 Enable */
-#define AD2D0SR		__REG(0x40f40014)	/* Application Subsystem Wake-Up from D2 to D0 Status */
-#define AD2D1ER		__REG(0x40f40018)	/* Application Subsystem Wake-Up from D2 to D1 Enable */
-#define AD2D1SR		__REG(0x40f4001c)	/* Application Subsystem Wake-Up from D2 to D1 Status */
-#define AD1D0ER		__REG(0x40f40020)	/* Application Subsystem Wake-Up from D1 to D0 Enable */
-#define AD1D0SR		__REG(0x40f40024)	/* Application Subsystem Wake-Up from D1 to D0 Status */
-#define AGENP		__REG(0x40f4002c)	/* Application Subsystem General Purpose */
-#define AD3R		__REG(0x40f40030)	/* Application Subsystem D3 Configuration */
-#define AD2R		__REG(0x40f40034)	/* Application Subsystem D2 Configuration */
-#define AD1R		__REG(0x40f40038)	/* Application Subsystem D1 Configuration */
-
-/*
- * Application Subsystem Configuration bits.
- */
-#define ASCR_RDH		(1 << 31)
-#define ASCR_D1S		(1 << 2)
-#define ASCR_D2S		(1 << 1)
-#define ASCR_D3S		(1 << 0)
-
-/*
- * Application Reset Status bits.
- */
-#define ARSR_GPR		(1 << 3)
-#define ARSR_LPMR		(1 << 2)
-#define ARSR_WDT		(1 << 1)
-#define ARSR_HWR		(1 << 0)
-
-/*
- * Application Subsystem Wake-Up bits.
- */
-#define ADXER_WRTC		(1 << 31)	/* RTC */
-#define ADXER_WOST		(1 << 30)	/* OS Timer */
-#define ADXER_WTSI		(1 << 29)	/* Touchscreen */
-#define ADXER_WUSBH		(1 << 28)	/* USB host */
-#define ADXER_WUSB2		(1 << 26)	/* USB client 2.0 */
-#define ADXER_WMSL0		(1 << 24)	/* MSL port 0*/
-#define ADXER_WDMUX3		(1 << 23)	/* USB EDMUX3 */
-#define ADXER_WDMUX2		(1 << 22)	/* USB EDMUX2 */
-#define ADXER_WKP		(1 << 21)	/* Keypad */
-#define ADXER_WUSIM1		(1 << 20)	/* USIM Port 1 */
-#define ADXER_WUSIM0		(1 << 19)	/* USIM Port 0 */
-#define ADXER_WOTG		(1 << 16)	/* USBOTG input */
-#define ADXER_MFP_WFLASH	(1 << 15)	/* MFP: Data flash busy */
-#define ADXER_MFP_GEN12		(1 << 14)	/* MFP: MMC3/GPIO/OST inputs */
-#define ADXER_MFP_WMMC2		(1 << 13)	/* MFP: MMC2 */
-#define ADXER_MFP_WMMC1		(1 << 12)	/* MFP: MMC1 */
-#define ADXER_MFP_WI2C		(1 << 11)	/* MFP: I2C */
-#define ADXER_MFP_WSSP4		(1 << 10)	/* MFP: SSP4 */
-#define ADXER_MFP_WSSP3		(1 << 9)	/* MFP: SSP3 */
-#define ADXER_MFP_WMAXTRIX	(1 << 8)	/* MFP: matrix keypad */
-#define ADXER_MFP_WUART3	(1 << 7)	/* MFP: UART3 */
-#define ADXER_MFP_WUART2	(1 << 6)	/* MFP: UART2 */
-#define ADXER_MFP_WUART1	(1 << 5)	/* MFP: UART1 */
-#define ADXER_MFP_WSSP2		(1 << 4)	/* MFP: SSP2 */
-#define ADXER_MFP_WSSP1		(1 << 3)	/* MFP: SSP1 */
-#define ADXER_MFP_WAC97		(1 << 2)	/* MFP: AC97 */
-#define ADXER_WEXTWAKE1		(1 << 1)	/* External Wake 1 */
-#define ADXER_WEXTWAKE0		(1 << 0)	/* External Wake 0 */
-
-/*
- * AD3R/AD2R/AD1R bits.  R2-R5 are only defined for PXA320.
- */
-#define ADXR_L2			(1 << 8)
-#define ADXR_R5			(1 << 5)
-#define ADXR_R4			(1 << 4)
-#define ADXR_R3			(1 << 3)
-#define ADXR_R2			(1 << 2)
-#define ADXR_R1			(1 << 1)
-#define ADXR_R0			(1 << 0)
-
-/*
- * Values for PWRMODE CP15 register
- */
-#define PXA3xx_PM_S3D4C4	0x07	/* aka deep sleep */
-#define PXA3xx_PM_S2D3C4	0x06	/* aka sleep */
-#define PXA3xx_PM_S0D2C2	0x03	/* aka standby */
-#define PXA3xx_PM_S0D1C2	0x02	/* aka LCD refresh */
-#define PXA3xx_PM_S0D0C1	0x01
-
-/*
- * Application Subsystem Clock
- */
-#define ACCR		__REG(0x41340000)	/* Application Subsystem Clock Configuration Register */
-#define ACSR		__REG(0x41340004)	/* Application Subsystem Clock Status Register */
-#define AICSR		__REG(0x41340008)	/* Application Subsystem Interrupt Control/Status Register */
-#define CKENA		__REG(0x4134000C)	/* A Clock Enable Register */
-#define CKENB		__REG(0x41340010)	/* B Clock Enable Register */
-#define AC97_DIV	__REG(0x41340014)	/* AC97 clock divisor value register */
-
-/*
- * Clock Enable Bit
- */
-#define CKEN_LCD	1	/* < LCD Clock Enable */
-#define CKEN_USBH	2	/* < USB host clock enable */
-#define CKEN_CAMERA	3	/* < Camera interface clock enable */
-#define CKEN_NAND	4	/* < NAND Flash Controller Clock Enable */
-#define CKEN_USB2	6	/* < USB 2.0 client clock enable. */
-#define CKEN_DMC	8	/* < Dynamic Memory Controller clock enable */
-#define CKEN_SMC	9	/* < Static Memory Controller clock enable */
-#define CKEN_ISC	10	/* < Internal SRAM Controller clock enable */
-#define CKEN_BOOT	11	/* < Boot rom clock enable */
-#define CKEN_MMC1	12	/* < MMC1 Clock enable */
-#define CKEN_MMC2	13	/* < MMC2 clock enable */
-#define CKEN_KEYPAD	14	/* < Keypand Controller Clock Enable */
-#define CKEN_CIR	15	/* < Consumer IR Clock Enable */
-#define CKEN_USIM0	17	/* < USIM[0] Clock Enable */
-#define CKEN_USIM1	18	/* < USIM[1] Clock Enable */
-#define CKEN_TPM	19	/* < TPM clock enable */
-#define CKEN_UDC	20	/* < UDC clock enable */
-#define CKEN_BTUART	21	/* < BTUART clock enable */
-#define CKEN_FFUART	22	/* < FFUART clock enable */
-#define CKEN_STUART	23	/* < STUART clock enable */
-#define CKEN_AC97	24	/* < AC97 clock enable */
-#define CKEN_TOUCH	25	/* < Touch screen Interface Clock Enable */
-#define CKEN_SSP1	26	/* < SSP1 clock enable */
-#define CKEN_SSP2	27	/* < SSP2 clock enable */
-#define CKEN_SSP3	28	/* < SSP3 clock enable */
-#define CKEN_SSP4	29	/* < SSP4 clock enable */
-#define CKEN_MSL0	30	/* < MSL0 clock enable */
-#define CKEN_PWM0	32	/* < PWM[0] clock enable */
-#define CKEN_PWM1	33	/* < PWM[1] clock enable */
-#define CKEN_I2C	36	/* < I2C clock enable */
-#define CKEN_INTC	38	/* < Interrupt controller clock enable */
-#define CKEN_GPIO	39	/* < GPIO clock enable */
-#define CKEN_1WIRE	40	/* < 1-wire clock enable */
-#define CKEN_HSIO2	41	/* < HSIO2 clock enable */
-#define CKEN_MINI_IM	48	/* < Mini-IM */
-#define CKEN_MINI_LCD	49	/* < Mini LCD */
-
-#if defined(CONFIG_CPU_PXA310)
-#define CKEN_MMC3	5	/* < MMC3 Clock Enable */
-#define CKEN_MVED	43	/* < MVED clock enable */
-#endif
-
-/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
-#define PXA300_CKEN_GRAPHICS	42	/* Graphics controller clock enable */
-#define PXA320_CKEN_GRAPHICS	7	/* Graphics controller clock enable */
-
-#endif /* __ASM_ARCH_PXA3XX_REGS_H */
diff --git a/include/asm-arm/arch-pxa/pxafb.h b/include/asm-arm/arch-pxa/pxafb.h
deleted file mode 100644
index daf018d..0000000
--- a/include/asm-arm/arch-pxa/pxafb.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/pxafb.h
- *
- *  Support for the xscale frame buffer.
- *
- *  Author:     Jean-Frederic Clere
- *  Created:    Sep 22, 2003
- *  Copyright:  jfclere@sinix.net
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/fb.h>
-#include <asm/arch/regs-lcd.h>
-
-/*
- * Supported LCD connections
- *
- * bits 0 - 3: for LCD panel type:
- *
- *   STN  - for passive matrix
- *   DSTN - for dual scan passive matrix
- *   TFT  - for active matrix
- *
- * bits 4 - 9 : for bus width
- * bits 10-17 : for AC Bias Pin Frequency
- * bit     18 : for output enable polarity
- * bit     19 : for pixel clock edge
- */
-#define LCD_CONN_TYPE(_x)	((_x) & 0x0f)
-#define LCD_CONN_WIDTH(_x)	(((_x) >> 4) & 0x1f)
-
-#define LCD_TYPE_UNKNOWN	0
-#define LCD_TYPE_MONO_STN	1
-#define LCD_TYPE_MONO_DSTN	2
-#define LCD_TYPE_COLOR_STN	3
-#define LCD_TYPE_COLOR_DSTN	4
-#define LCD_TYPE_COLOR_TFT	5
-#define LCD_TYPE_SMART_PANEL	6
-#define LCD_TYPE_MAX		7
-
-#define LCD_MONO_STN_4BPP	((4  << 4) | LCD_TYPE_MONO_STN)
-#define LCD_MONO_STN_8BPP	((8  << 4) | LCD_TYPE_MONO_STN)
-#define LCD_MONO_DSTN_8BPP	((8  << 4) | LCD_TYPE_MONO_DSTN)
-#define LCD_COLOR_STN_8BPP	((8  << 4) | LCD_TYPE_COLOR_STN)
-#define LCD_COLOR_DSTN_16BPP	((16 << 4) | LCD_TYPE_COLOR_DSTN)
-#define LCD_COLOR_TFT_16BPP	((16 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_COLOR_TFT_18BPP	((18 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_SMART_PANEL_8BPP	((8  << 4) | LCD_TYPE_SMART_PANEL)
-#define LCD_SMART_PANEL_16BPP	((16 << 4) | LCD_TYPE_SMART_PANEL)
-#define LCD_SMART_PANEL_18BPP	((18 << 4) | LCD_TYPE_SMART_PANEL)
-
-#define LCD_AC_BIAS_FREQ(x)	(((x) & 0xff) << 10)
-#define LCD_BIAS_ACTIVE_HIGH	(0 << 17)
-#define LCD_BIAS_ACTIVE_LOW	(1 << 17)
-#define LCD_PCLK_EDGE_RISE	(0 << 18)
-#define LCD_PCLK_EDGE_FALL	(1 << 18)
-
-/*
- * This structure describes the machine which we are running on.
- * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
- * of linux/drivers/video/pxafb.c
- */
-struct pxafb_mode_info {
-	u_long		pixclock;
-
-	u_short		xres;
-	u_short		yres;
-
-	u_char		bpp;
-	u_int		cmap_greyscale:1,
-			depth:8,
-			unused:23;
-
-	/* Parallel Mode Timing */
-	u_char		hsync_len;
-	u_char		left_margin;
-	u_char		right_margin;
-
-	u_char		vsync_len;
-	u_char		upper_margin;
-	u_char		lower_margin;
-	u_char		sync;
-
-	/* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
-	 * Note:
-	 * 1. all parameters in nanosecond (ns)
-	 * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
-	 *    in pxa27x and pxa3xx, initialize them to the same value or
-	 *    the larger one will be used
-	 * 3. same to {rd,wr}_pulse_width
-	 */
-	unsigned	a0csrd_set_hld;	/* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
-	unsigned	a0cswr_set_hld;	/* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
-	unsigned	wr_pulse_width;	/* L_PCLK_WR pulse width */
-	unsigned	rd_pulse_width;	/* L_FCLK_RD pulse width */
-	unsigned	cmd_inh_time;	/* Command Inhibit time between two writes */
-	unsigned	op_hold_time;	/* Output Hold time from L_FCLK_RD negation */
-};
-
-struct pxafb_mach_info {
-	struct pxafb_mode_info *modes;
-	unsigned int num_modes;
-
-	unsigned int	lcd_conn;
-
-	u_int		fixed_modes:1,
-			cmap_inverse:1,
-			cmap_static:1,
-			unused:29;
-
-	/* The following should be defined in LCCR0
-	 *      LCCR0_Act or LCCR0_Pas          Active or Passive
-	 *      LCCR0_Sngl or LCCR0_Dual        Single/Dual panel
-	 *      LCCR0_Mono or LCCR0_Color       Mono/Color
-	 *      LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
-	 *      LCCR0_DMADel(Tcpu) (optional)   DMA request delay
-	 *
-	 * The following should not be defined in LCCR0:
-	 *      LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
-	 *      LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
-	 */
-	u_int		lccr0;
-	/* The following should be defined in LCCR3
-	 *      LCCR3_OutEnH or LCCR3_OutEnL    Output enable polarity
-	 *      LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
-	 *      LCCR3_Acb(X)                    AB Bias pin frequency
-	 *      LCCR3_DPC (optional)            Double Pixel Clock mode (untested)
-	 *
-	 * The following should not be defined in LCCR3
-	 *      LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
-	 */
-	u_int		lccr3;
-	/* The following should be defined in LCCR4
-	 *	LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2
-	 *
-	 * All other bits in LCCR4 should be left alone.
-	 */
-	u_int		lccr4;
-	void (*pxafb_backlight_power)(int);
-	void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
-	void (*smart_update)(struct fb_info *);
-};
-void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
-void set_pxa_fb_parent(struct device *parent_dev);
-unsigned long pxafb_get_hsync_time(struct device *dev);
-
-extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
-extern int pxafb_smart_flush(struct fb_info *info);
diff --git a/include/asm-arm/arch-pxa/regs-lcd.h b/include/asm-arm/arch-pxa/regs-lcd.h
deleted file mode 100644
index 820a189..0000000
--- a/include/asm-arm/arch-pxa/regs-lcd.h
+++ /dev/null
@@ -1,180 +0,0 @@
-#ifndef __ASM_ARCH_REGS_LCD_H
-#define __ASM_ARCH_REGS_LCD_H
-
-#include <asm/arch/bitfield.h>
-
-/*
- * LCD Controller Registers and Bits Definitions
- */
-#define LCCR0		(0x000)	/* LCD Controller Control Register 0 */
-#define LCCR1		(0x004)	/* LCD Controller Control Register 1 */
-#define LCCR2		(0x008)	/* LCD Controller Control Register 2 */
-#define LCCR3		(0x00C)	/* LCD Controller Control Register 3 */
-#define LCCR4		(0x010)	/* LCD Controller Control Register 4 */
-#define LCCR5		(0x014)	/* LCD Controller Control Register 5 */
-#define DFBR0		(0x020)	/* DMA Channel 0 Frame Branch Register */
-#define DFBR1		(0x024)	/* DMA Channel 1 Frame Branch Register */
-#define LCSR		(0x038)	/* LCD Controller Status Register */
-#define LIIDR		(0x03C)	/* LCD Controller Interrupt ID Register */
-#define TMEDRGBR	(0x040)	/* TMED RGB Seed Register */
-#define TMEDCR		(0x044)	/* TMED Control Register */
-
-#define CMDCR		(0x100)	/* Command Control Register */
-#define PRSR		(0x104)	/* Panel Read Status Register */
-
-#define LCCR3_1BPP	(0 << 24)
-#define LCCR3_2BPP	(1 << 24)
-#define LCCR3_4BPP	(2 << 24)
-#define LCCR3_8BPP	(3 << 24)
-#define LCCR3_16BPP	(4 << 24)
-#define LCCR3_18BPP	(5 << 24)
-#define LCCR3_18BPP_P	(6 << 24)
-#define LCCR3_19BPP	(7 << 24)
-#define LCCR3_19BPP_P	(1 << 29)
-#define LCCR3_24BPP	((1 << 29) | (1 << 24))
-#define LCCR3_25BPP	((1 << 29) | (2 << 24))
-
-#define LCCR3_PDFOR_0	(0 << 30)
-#define LCCR3_PDFOR_1	(1 << 30)
-#define LCCR3_PDFOR_2	(2 << 30)
-#define LCCR3_PDFOR_3	(3 << 30)
-
-#define LCCR4_PAL_FOR_0	(0 << 15)
-#define LCCR4_PAL_FOR_1	(1 << 15)
-#define LCCR4_PAL_FOR_2	(2 << 15)
-#define LCCR4_PAL_FOR_MASK	(3 << 15)
-
-#define FDADR0		(0x200)	/* DMA Channel 0 Frame Descriptor Address Register */
-#define FSADR0		(0x204)	/* DMA Channel 0 Frame Source Address Register */
-#define FIDR0		(0x208)	/* DMA Channel 0 Frame ID Register */
-#define LDCMD0		(0x20C)	/* DMA Channel 0 Command Register */
-#define FDADR1		(0x210)	/* DMA Channel 1 Frame Descriptor Address Register */
-#define FSADR1		(0x214)	/* DMA Channel 1 Frame Source Address Register */
-#define FIDR1		(0x218)	/* DMA Channel 1 Frame ID Register */
-#define LDCMD1		(0x21C)	/* DMA Channel 1 Command Register */
-#define FDADR6		(0x260) /* DMA Channel 6 Frame Descriptor Address Register */
-#define FSADR6		(0x264) /* DMA Channel 6 Frame Source Address Register */
-#define FIDR6		(0x268) /* DMA Channel 6 Frame ID Register */
-
-#define LCCR0_ENB	(1 << 0)	/* LCD Controller enable */
-#define LCCR0_CMS	(1 << 1)	/* Color/Monochrome Display Select */
-#define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display */
-#define LCCR0_Mono	(LCCR0_CMS*1)	/*  Monochrome display */
-#define LCCR0_SDS	(1 << 2)	/* Single/Dual Panel Display Select */
-#define LCCR0_Sngl	(LCCR0_SDS*0)	/*  Single panel display */
-#define LCCR0_Dual	(LCCR0_SDS*1)	/*  Dual panel display */
-
-#define LCCR0_LDM	(1 << 3)	/* LCD Disable Done Mask */
-#define LCCR0_SFM	(1 << 4)	/* Start of frame mask */
-#define LCCR0_IUM	(1 << 5)	/* Input FIFO underrun mask */
-#define LCCR0_EFM	(1 << 6)	/* End of Frame mask */
-#define LCCR0_PAS	(1 << 7)	/* Passive/Active display Select */
-#define LCCR0_Pas	(LCCR0_PAS*0)	/*  Passive display (STN) */
-#define LCCR0_Act	(LCCR0_PAS*1)	/*  Active display (TFT) */
-#define LCCR0_DPD	(1 << 9)	/* Double Pixel Data (monochrome) */
-#define LCCR0_4PixMono	(LCCR0_DPD*0)	/*  4-Pixel/clock Monochrome display */
-#define LCCR0_8PixMono	(LCCR0_DPD*1)	/*  8-Pixel/clock Monochrome display */
-#define LCCR0_DIS	(1 << 10)	/* LCD Disable */
-#define LCCR0_QDM	(1 << 11)	/* LCD Quick Disable mask */
-#define LCCR0_PDD	(0xff << 12)	/* Palette DMA request delay */
-#define LCCR0_PDD_S	12
-#define LCCR0_BM	(1 << 20)	/* Branch mask */
-#define LCCR0_OUM	(1 << 21)	/* Output FIFO underrun mask */
-#define LCCR0_LCDT	(1 << 22)	/* LCD panel type */
-#define LCCR0_RDSTM	(1 << 23)	/* Read status interrupt mask */
-#define LCCR0_CMDIM	(1 << 24)	/* Command interrupt mask */
-#define LCCR0_OUC	(1 << 25)	/* Overlay Underlay control bit */
-#define LCCR0_LDDALT	(1 << 26)	/* LDD alternate mapping control */
-
-#define LCCR1_PPL	Fld (10, 0)	/* Pixels Per Line - 1 */
-#define LCCR1_DisWdth(Pixel)	(((Pixel) - 1) << FShft (LCCR1_PPL))
-
-#define LCCR1_HSW	Fld (6, 10)	/* Horizontal Synchronization */
-#define LCCR1_HorSnchWdth(Tpix)	(((Tpix) - 1) << FShft (LCCR1_HSW))
-
-#define LCCR1_ELW	Fld (8, 16)	/* End-of-Line pixel clock Wait - 1 */
-#define LCCR1_EndLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_ELW))
-
-#define LCCR1_BLW	Fld (8, 24)	/* Beginning-of-Line pixel clock */
-#define LCCR1_BegLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_BLW))
-
-#define LCCR2_LPP	Fld (10, 0)	/* Line Per Panel - 1 */
-#define LCCR2_DisHght(Line)	(((Line) - 1) << FShft (LCCR2_LPP))
-
-#define LCCR2_VSW	Fld (6, 10)	/* Vertical Synchronization pulse - 1 */
-#define LCCR2_VrtSnchWdth(Tln)	(((Tln) - 1) << FShft (LCCR2_VSW))
-
-#define LCCR2_EFW	Fld (8, 16)	/* End-of-Frame line clock Wait */
-#define LCCR2_EndFrmDel(Tln)	((Tln) << FShft (LCCR2_EFW))
-
-#define LCCR2_BFW	Fld (8, 24)	/* Beginning-of-Frame line clock */
-#define LCCR2_BegFrmDel(Tln)	((Tln) << FShft (LCCR2_BFW))
-
-#define LCCR3_API	(0xf << 16)	/* AC Bias pin trasitions per interrupt */
-#define LCCR3_API_S	16
-#define LCCR3_VSP	(1 << 20)	/* vertical sync polarity */
-#define LCCR3_HSP	(1 << 21)	/* horizontal sync polarity */
-#define LCCR3_PCP	(1 << 22)	/* Pixel Clock Polarity (L_PCLK) */
-#define LCCR3_PixRsEdg	(LCCR3_PCP*0)	/*  Pixel clock Rising-Edge */
-#define LCCR3_PixFlEdg	(LCCR3_PCP*1)	/*  Pixel clock Falling-Edge */
-
-#define LCCR3_OEP	(1 << 23)	/* Output Enable Polarity */
-#define LCCR3_OutEnH	(LCCR3_OEP*0)	/*  Output Enable active High */
-#define LCCR3_OutEnL	(LCCR3_OEP*1)	/*  Output Enable active Low */
-
-#define LCCR3_DPC	(1 << 27)	/* double pixel clock mode */
-#define LCCR3_PCD	Fld (8, 0)	/* Pixel Clock Divisor */
-#define LCCR3_PixClkDiv(Div)	(((Div) << FShft (LCCR3_PCD)))
-
-#define LCCR3_BPP	Fld (3, 24)	/* Bit Per Pixel */
-#define LCCR3_Bpp(Bpp)	(((Bpp) << FShft (LCCR3_BPP)))
-
-#define LCCR3_ACB	Fld (8, 8)	/* AC Bias */
-#define LCCR3_Acb(Acb)	(((Acb) << FShft (LCCR3_ACB)))
-
-#define LCCR3_HorSnchH	(LCCR3_HSP*0)	/*  HSP Active High */
-#define LCCR3_HorSnchL	(LCCR3_HSP*1)	/*  HSP Active Low */
-
-#define LCCR3_VrtSnchH	(LCCR3_VSP*0)	/*  VSP Active High */
-#define LCCR3_VrtSnchL	(LCCR3_VSP*1)	/*  VSP Active Low */
-
-#define LCCR5_IUM(x)	(1 << ((x) + 23)) /* input underrun mask */
-#define LCCR5_BSM(x)	(1 << ((x) + 15)) /* branch mask */
-#define LCCR5_EOFM(x)	(1 << ((x) + 7))  /* end of frame mask */
-#define LCCR5_SOFM(x)	(1 << ((x) + 0))  /* start of frame mask */
-
-#define LCSR_LDD	(1 << 0)	/* LCD Disable Done */
-#define LCSR_SOF	(1 << 1)	/* Start of frame */
-#define LCSR_BER	(1 << 2)	/* Bus error */
-#define LCSR_ABC	(1 << 3)	/* AC Bias count */
-#define LCSR_IUL	(1 << 4)	/* input FIFO underrun Lower panel */
-#define LCSR_IUU	(1 << 5)	/* input FIFO underrun Upper panel */
-#define LCSR_OU		(1 << 6)	/* output FIFO underrun */
-#define LCSR_QD		(1 << 7)	/* quick disable */
-#define LCSR_EOF	(1 << 8)	/* end of frame */
-#define LCSR_BS		(1 << 9)	/* branch status */
-#define LCSR_SINT	(1 << 10)	/* subsequent interrupt */
-#define LCSR_RD_ST	(1 << 11)	/* read status */
-#define LCSR_CMD_INT	(1 << 12)	/* command interrupt */
-
-#define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
-
-/* smartpanel related */
-#define PRSR_DATA(x)	((x) & 0xff)	/* Panel Data */
-#define PRSR_A0		(1 << 8)	/* Read Data Source */
-#define PRSR_ST_OK	(1 << 9)	/* Status OK */
-#define PRSR_CON_NT	(1 << 10)	/* Continue to Next Command */
-
-#define SMART_CMD_A0			 (0x1 << 8)
-#define SMART_CMD_READ_STATUS_REG	 (0x0 << 9)
-#define SMART_CMD_READ_FRAME_BUFFER	((0x0 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WRITE_COMMAND		 (0x1 << 9)
-#define SMART_CMD_WRITE_DATA		((0x1 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WRITE_FRAME		((0x2 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WAIT_FOR_VSYNC	 (0x3 << 9)
-#define SMART_CMD_NOOP			 (0x4 << 9)
-#define SMART_CMD_INTERRUPT		 (0x5 << 9)
-
-#define SMART_CMD(x)	(SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
-#define SMART_DAT(x)	(SMART_CMD_WRITE_DATA | ((x) & 0xff))
-#endif /* __ASM_ARCH_REGS_LCD_H */
diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h
deleted file mode 100644
index 6956fc5..0000000
--- a/include/asm-arm/arch-pxa/system.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/system.h
- *
- * Author:	Nicolas Pitre
- * Created:	Jun 15, 2001
- * Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/proc-fns.h>
-#include "hardware.h"
-#include "pxa2xx-regs.h"
-#include "pxa-regs.h"
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-
-void arch_reset(char mode);
diff --git a/include/asm-arm/arch-pxa/timex.h b/include/asm-arm/arch-pxa/timex.h
deleted file mode 100644
index 8d882f0..0000000
--- a/include/asm-arm/arch-pxa/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/timex.h
- *
- * Author:	Nicolas Pitre
- * Created:	Jun 15, 2001
- * Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-#if defined(CONFIG_PXA25x)
-/* PXA250/210 timer base */
-#define CLOCK_TICK_RATE 3686400
-#elif defined(CONFIG_PXA27x)
-/* PXA27x timer base */
-#ifdef CONFIG_MACH_MAINSTONE
-#define CLOCK_TICK_RATE 3249600
-#else
-#define CLOCK_TICK_RATE 3250000
-#endif
-#else
-#define CLOCK_TICK_RATE 3250000
-#endif
diff --git a/include/asm-arm/arch-pxa/udc.h b/include/asm-arm/arch-pxa/udc.h
deleted file mode 100644
index 27aa3a91..0000000
--- a/include/asm-arm/arch-pxa/udc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/udc.h
- *
- */
-#include <asm/mach/udc_pxa2xx.h>
-
-extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info);
-
diff --git a/include/asm-arm/arch-pxa/uncompress.h b/include/asm-arm/arch-pxa/uncompress.h
deleted file mode 100644
index f455126..0000000
--- a/include/asm-arm/arch-pxa/uncompress.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/uncompress.h
- *
- * Author:	Nicolas Pitre
- * Copyright:	(C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/mach-types.h>
-
-#define __REG(x)       ((volatile unsigned long *)x)
-
-static volatile unsigned long *UART = FFUART;
-
-static inline void putc(char c)
-{
-	if (!(UART[UART_IER] & IER_UUE))
-		return;
-	while (!(UART[UART_LSR] & LSR_TDRQ))
-		barrier();
-	UART[UART_TX] = c;
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-static inline void arch_decomp_setup(void)
-{
-	if (machine_is_littleton())
-		UART = STUART;
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-pxa/vmalloc.h b/include/asm-arm/arch-pxa/vmalloc.h
deleted file mode 100644
index 5bb450c..0000000
--- a/include/asm-arm/arch-pxa/vmalloc.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/vmalloc.h
- *
- * Author:	Nicolas Pitre
- * Copyright:	(C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END       (0xe8000000)
diff --git a/include/asm-arm/arch-realview/board-eb.h b/include/asm-arm/arch-realview/board-eb.h
deleted file mode 100644
index 206f7a7..0000000
--- a/include/asm-arm/arch-realview/board-eb.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * include/asm-arm/arch-realview/board-eb.h
- *
- * Copyright (C) 2007 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_EB_H
-#define __ASM_ARCH_BOARD_EB_H
-
-#include <asm/arch/platform.h>
-
-/*
- * RealView EB + ARM11MPCore peripheral addresses
- */
-#define REALVIEW_EB_UART0_BASE		0x10009000	/* UART 0 */
-#define REALVIEW_EB_UART1_BASE		0x1000A000	/* UART 1 */
-#define REALVIEW_EB_UART2_BASE		0x1000B000	/* UART 2 */
-#define REALVIEW_EB_UART3_BASE		0x1000C000	/* UART 3 */
-#define REALVIEW_EB_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_EB_WATCHDOG_BASE	0x10010000	/* watchdog interface */
-#define REALVIEW_EB_TIMER0_1_BASE	0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_EB_TIMER2_3_BASE	0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_EB_GPIO0_BASE		0x10013000	/* GPIO port 0 */
-#define REALVIEW_EB_RTC_BASE		0x10017000	/* Real Time Clock */
-#define REALVIEW_EB_CLCD_BASE		0x10020000	/* CLCD */
-#define REALVIEW_EB_GIC_CPU_BASE	0x10040000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB_GIC_DIST_BASE	0x10041000	/* Generic interrupt controller distributor */
-#define REALVIEW_EB_SMC_BASE		0x10080000	/* Static memory controller */
-
-#define REALVIEW_EB_FLASH_BASE		0x40000000
-#define REALVIEW_EB_FLASH_SIZE		SZ_64M
-#define REALVIEW_EB_ETH_BASE		0x4E000000	/* Ethernet */
-#define REALVIEW_EB_USB_BASE		0x4F000000	/* USB */
-
-#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
-#define REALVIEW_EB11MP_SCU_BASE	0x10100000	/* SCU registers */
-#define REALVIEW_EB11MP_GIC_CPU_BASE	0x10100100	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE	0x10100700
-#define REALVIEW_EB11MP_TWD_SIZE	0x00000100
-#define REALVIEW_EB11MP_GIC_DIST_BASE	0x10101000	/* Generic interrupt controller distributor */
-#define REALVIEW_EB11MP_L220_BASE	0x10102000	/* L220 registers */
-#define REALVIEW_EB11MP_SYS_PLD_CTRL1	0xD8		/* Register offset for MPCore sysctl */
-#else
-#define REALVIEW_EB11MP_SCU_BASE	0x1F000000	/* SCU registers */
-#define REALVIEW_EB11MP_GIC_CPU_BASE	0x1F000100	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE	0x1F000700
-#define REALVIEW_EB11MP_TWD_SIZE	0x00000100
-#define REALVIEW_EB11MP_GIC_DIST_BASE	0x1F001000	/* Generic interrupt controller distributor */
-#define REALVIEW_EB11MP_L220_BASE	0x1F002000	/* L220 registers */
-#define REALVIEW_EB11MP_SYS_PLD_CTRL1	0x74		/* Register offset for MPCore sysctl */
-#endif
-
-#define IRQ_EB_GIC_START	32
-
-/*
- * RealView EB interrupt sources
- */
-#define IRQ_EB_WDOG		(IRQ_EB_GIC_START + 0)		/* Watchdog timer */
-#define IRQ_EB_SOFT		(IRQ_EB_GIC_START + 1)		/* Software interrupt */
-#define IRQ_EB_COMMRx		(IRQ_EB_GIC_START + 2)		/* Debug Comm Rx interrupt */
-#define IRQ_EB_COMMTx		(IRQ_EB_GIC_START + 3)		/* Debug Comm Tx interrupt */
-#define IRQ_EB_TIMER0_1		(IRQ_EB_GIC_START + 4)		/* Timer 0 and 1 */
-#define IRQ_EB_TIMER2_3		(IRQ_EB_GIC_START + 5)		/* Timer 2 and 3 */
-#define IRQ_EB_GPIO0		(IRQ_EB_GIC_START + 6)		/* GPIO 0 */
-#define IRQ_EB_GPIO1		(IRQ_EB_GIC_START + 7)		/* GPIO 1 */
-#define IRQ_EB_GPIO2		(IRQ_EB_GIC_START + 8)		/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_EB_RTC		(IRQ_EB_GIC_START + 10)		/* Real Time Clock */
-#define IRQ_EB_SSP		(IRQ_EB_GIC_START + 11)		/* Synchronous Serial Port */
-#define IRQ_EB_UART0		(IRQ_EB_GIC_START + 12)		/* UART 0 on development chip */
-#define IRQ_EB_UART1		(IRQ_EB_GIC_START + 13)		/* UART 1 on development chip */
-#define IRQ_EB_UART2		(IRQ_EB_GIC_START + 14)		/* UART 2 on development chip */
-#define IRQ_EB_UART3		(IRQ_EB_GIC_START + 15)		/* UART 3 on development chip */
-#define IRQ_EB_SCI		(IRQ_EB_GIC_START + 16)		/* Smart Card Interface */
-#define IRQ_EB_MMCI0A		(IRQ_EB_GIC_START + 17)		/* Multimedia Card 0A */
-#define IRQ_EB_MMCI0B		(IRQ_EB_GIC_START + 18)		/* Multimedia Card 0B */
-#define IRQ_EB_AACI		(IRQ_EB_GIC_START + 19)		/* Audio Codec */
-#define IRQ_EB_KMI0		(IRQ_EB_GIC_START + 20)		/* Keyboard/Mouse port 0 */
-#define IRQ_EB_KMI1		(IRQ_EB_GIC_START + 21)		/* Keyboard/Mouse port 1 */
-#define IRQ_EB_CHARLCD		(IRQ_EB_GIC_START + 22)		/* Character LCD */
-#define IRQ_EB_CLCD		(IRQ_EB_GIC_START + 23)		/* CLCD controller */
-#define IRQ_EB_DMA		(IRQ_EB_GIC_START + 24)		/* DMA controller */
-#define IRQ_EB_PWRFAIL		(IRQ_EB_GIC_START + 25)		/* Power failure */
-#define IRQ_EB_PISMO		(IRQ_EB_GIC_START + 26)		/* PISMO interface */
-#define IRQ_EB_DoC		(IRQ_EB_GIC_START + 27)		/* Disk on Chip memory controller */
-#define IRQ_EB_ETH		(IRQ_EB_GIC_START + 28)		/* Ethernet controller */
-#define IRQ_EB_USB		(IRQ_EB_GIC_START + 29)		/* USB controller */
-#define IRQ_EB_TSPEN		(IRQ_EB_GIC_START + 30)		/* Touchscreen pen */
-#define IRQ_EB_TSKPAD		(IRQ_EB_GIC_START + 31)		/* Touchscreen keypad */
-
-/*
- * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
- */
-#define IRQ_EB11MP_AACI		(IRQ_EB_GIC_START + 0)
-#define IRQ_EB11MP_TIMER0_1	(IRQ_EB_GIC_START + 1)
-#define IRQ_EB11MP_TIMER2_3	(IRQ_EB_GIC_START + 2)
-#define IRQ_EB11MP_USB		(IRQ_EB_GIC_START + 3)
-#define IRQ_EB11MP_UART0	(IRQ_EB_GIC_START + 4)
-#define IRQ_EB11MP_UART1	(IRQ_EB_GIC_START + 5)
-#define IRQ_EB11MP_RTC		(IRQ_EB_GIC_START + 6)
-#define IRQ_EB11MP_KMI0		(IRQ_EB_GIC_START + 7)
-#define IRQ_EB11MP_KMI1		(IRQ_EB_GIC_START + 8)
-#define IRQ_EB11MP_ETH		(IRQ_EB_GIC_START + 9)
-#define IRQ_EB11MP_EB_IRQ1	(IRQ_EB_GIC_START + 10)		/* main GIC */
-#define IRQ_EB11MP_EB_IRQ2	(IRQ_EB_GIC_START + 11)		/* tile GIC */
-#define IRQ_EB11MP_EB_FIQ1	(IRQ_EB_GIC_START + 12)		/* main GIC */
-#define IRQ_EB11MP_EB_FIQ2	(IRQ_EB_GIC_START + 13)		/* tile GIC */
-#define IRQ_EB11MP_MMCI0A	(IRQ_EB_GIC_START + 14)
-#define IRQ_EB11MP_MMCI0B	(IRQ_EB_GIC_START + 15)
-
-#define IRQ_EB11MP_PMU_CPU0	(IRQ_EB_GIC_START + 17)
-#define IRQ_EB11MP_PMU_CPU1	(IRQ_EB_GIC_START + 18)
-#define IRQ_EB11MP_PMU_CPU2	(IRQ_EB_GIC_START + 19)
-#define IRQ_EB11MP_PMU_CPU3	(IRQ_EB_GIC_START + 20)
-#define IRQ_EB11MP_PMU_SCU0	(IRQ_EB_GIC_START + 21)
-#define IRQ_EB11MP_PMU_SCU1	(IRQ_EB_GIC_START + 22)
-#define IRQ_EB11MP_PMU_SCU2	(IRQ_EB_GIC_START + 23)
-#define IRQ_EB11MP_PMU_SCU3	(IRQ_EB_GIC_START + 24)
-#define IRQ_EB11MP_PMU_SCU4	(IRQ_EB_GIC_START + 25)
-#define IRQ_EB11MP_PMU_SCU5	(IRQ_EB_GIC_START + 26)
-#define IRQ_EB11MP_PMU_SCU6	(IRQ_EB_GIC_START + 27)
-#define IRQ_EB11MP_PMU_SCU7	(IRQ_EB_GIC_START + 28)
-
-#define IRQ_EB11MP_L220_EVENT	(IRQ_EB_GIC_START + 29)
-#define IRQ_EB11MP_L220_SLAVE	(IRQ_EB_GIC_START + 30)
-#define IRQ_EB11MP_L220_DECODE	(IRQ_EB_GIC_START + 31)
-
-#define IRQ_EB11MP_UART2	-1
-#define IRQ_EB11MP_UART3	-1
-#define IRQ_EB11MP_CLCD		-1
-#define IRQ_EB11MP_DMA		-1
-#define IRQ_EB11MP_WDOG		-1
-#define IRQ_EB11MP_GPIO0	-1
-#define IRQ_EB11MP_GPIO1	-1
-#define IRQ_EB11MP_GPIO2	-1
-#define IRQ_EB11MP_SCI		-1
-#define IRQ_EB11MP_SSP		-1
-
-#define NR_GIC_EB11MP		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_EB
- */
-#define NR_IRQS_EB		(IRQ_EB_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_EB) \
-	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_EB
-#endif
-
-#if defined(CONFIG_REALVIEW_EB_ARM11MP) \
-	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_EB11MP
-#endif
-
-/*
- * Core tile identification (REALVIEW_SYS_PROCID)
- */
-#define REALVIEW_EB_PROC_MASK		0xFF000000
-#define REALVIEW_EB_PROC_ARM7TDMI	0x00000000
-#define REALVIEW_EB_PROC_ARM9		0x02000000
-#define REALVIEW_EB_PROC_ARM11		0x04000000
-#define REALVIEW_EB_PROC_ARM11MP	0x06000000
-
-#define check_eb_proc(proc_type)						\
-	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK)	\
-	 == proc_type)
-
-#ifdef CONFIG_REALVIEW_EB_ARM11MP
-#define core_tile_eb11mp()	check_eb_proc(REALVIEW_EB_PROC_ARM11MP)
-#else
-#define core_tile_eb11mp()	0
-#endif
-
-#endif	/* __ASM_ARCH_BOARD_EB_H */
diff --git a/include/asm-arm/arch-realview/board-pb1176.h b/include/asm-arm/arch-realview/board-pb1176.h
deleted file mode 100644
index 48ce9c8..0000000
--- a/include/asm-arm/arch-realview/board-pb1176.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * include/asm-arm/arch-realview/board-pb1176.h
- *
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_PB1176_H
-#define __ASM_ARCH_BOARD_PB1176_H
-
-#include <asm/arch/platform.h>
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PB1176_SCTL_BASE		0x10100000 /* System controller */
-#define REALVIEW_PB1176_SMC_BASE		0x10111000 /* SMC */
-#define REALVIEW_PB1176_DMC_BASE		0x10109000 /* DMC configuration */
-#define REALVIEW_PB1176_SDRAM67_BASE		0x70000000 /* SDRAM banks 6 and 7 */
-#define REALVIEW_PB1176_FLASH_BASE		0x30000000
-#define REALVIEW_PB1176_FLASH_SIZE		SZ_64M
-
-#define REALVIEW_PB1176_TIMER0_1_BASE		0x10104000 /* Timer 0 and 1 */
-#define REALVIEW_PB1176_TIMER2_3_BASE		0x10105000 /* Timer 2 and 3 */
-#define REALVIEW_PB1176_TIMER4_5_BASE		0x10106000 /* Timer 4 and 5 */
-#define REALVIEW_PB1176_WATCHDOG_BASE		0x10107000 /* watchdog interface */
-#define REALVIEW_PB1176_RTC_BASE		0x10108000 /* Real Time Clock */
-#define REALVIEW_PB1176_GPIO0_BASE		0x1010A000 /* GPIO port 0 */
-#define REALVIEW_PB1176_SSP_BASE		0x1010B000 /* Synchronous Serial Port */
-#define REALVIEW_PB1176_UART0_BASE		0x1010C000 /* UART 0 */
-#define REALVIEW_PB1176_UART1_BASE		0x1010D000 /* UART 1 */
-#define REALVIEW_PB1176_UART2_BASE		0x1010E000 /* UART 2 */
-#define REALVIEW_PB1176_UART3_BASE		0x1010F000 /* UART 3 */
-#define REALVIEW_PB1176_CLCD_BASE		0x10112000 /* CLCD */
-#define REALVIEW_PB1176_ETH_BASE		0x3A000000 /* Ethernet */
-#define REALVIEW_PB1176_USB_BASE		0x3B000000 /* USB */
-
-/*
- * PCI regions
- */
-#define REALVIEW_PB1176_PCI_BASE		0x60000000 /* PCI self config */
-#define REALVIEW_PB1176_PCI_CFG_BASE		0x61000000 /* PCI config */
-#define REALVIEW_PB1176_PCI_IO_BASE0		0x62000000 /* PCI IO region */
-#define REALVIEW_PB1176_PCI_MEM_BASE0		0x63000000 /* Memory region 1 */
-#define REALVIEW_PB1176_PCI_MEM_BASE1		0x64000000 /* Memory region 2 */
-#define REALVIEW_PB1176_PCI_MEM_BASE2		0x68000000 /* Memory region 3 */
-
-#define REALVIEW_PB1176_PCI_BASE_SIZE		0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE	0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE	0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE	0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE	0x04000000 /* 64MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE	0x08000000 /* 128MB */
-
-#define REALVIEW_DC1176_GIC_CPU_BASE		0x10120000 /* GIC CPU interface, on devchip */
-#define REALVIEW_DC1176_GIC_DIST_BASE		0x10121000 /* GIC distributor, on devchip */
-#define REALVIEW_PB1176_GIC_CPU_BASE		0x10040000 /* GIC CPU interface, on FPGA */
-#define REALVIEW_PB1176_GIC_DIST_BASE		0x10041000 /* GIC distributor, on FPGA */
-#define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
-
-/*
- * Irqs
- */
-#define IRQ_DC1176_GIC_START			32
-#define IRQ_PB1176_GIC_START			64
-
-/*
- * ARM1176 DevChip interrupt sources (primary GIC)
- */
-#define IRQ_DC1176_WATCHDOG	(IRQ_DC1176_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
-#define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
-#define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
-#define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
-#define IRQ_DC1176_APC		(IRQ_DC1176_GIC_START + 11)
-#define IRQ_DC1176_IEC		(IRQ_DC1176_GIC_START + 12)
-#define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
-#define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
-#define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
-#define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
-#define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
-#define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
-#define IRQ_DC1176_UART3	(IRQ_DC1176_GIC_START + 21)	/* UART 3 on development chip */
-
-#define IRQ_DC1176_PB_IRQ2	(IRQ_DC1176_GIC_START + 30)	/* tile GIC */
-#define IRQ_DC1176_PB_IRQ1	(IRQ_DC1176_GIC_START + 31)	/* main GIC */
-
-/*
- * RealView PB1176 interrupt sources (secondary GIC)
- */
-#define IRQ_PB1176_MMCI0A	(IRQ_PB1176_GIC_START + 1)	/* Multimedia Card 0A */
-#define IRQ_PB1176_MMCI0B	(IRQ_PB1176_GIC_START + 2)	/* Multimedia Card 0A */
-#define IRQ_PB1176_KMI0		(IRQ_PB1176_GIC_START + 3)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB1176_KMI1		(IRQ_PB1176_GIC_START + 4)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB1176_SCI		(IRQ_PB1176_GIC_START + 5)
-#define IRQ_PB1176_UART4	(IRQ_PB1176_GIC_START + 6)	/* UART 4 on baseboard */
-#define IRQ_PB1176_CHARLCD	(IRQ_PB1176_GIC_START + 7)	/* Character LCD */
-#define IRQ_PB1176_GPIO1	(IRQ_PB1176_GIC_START + 8)
-#define IRQ_PB1176_GPIO2	(IRQ_PB1176_GIC_START + 9)
-#define IRQ_PB1176_ETH		(IRQ_PB1176_GIC_START + 10)	/* Ethernet controller */
-#define IRQ_PB1176_USB		(IRQ_PB1176_GIC_START + 11)	/* USB controller */
-
-#define IRQ_PB1176_PISMO	(IRQ_PB1176_GIC_START + 16)
-
-#define IRQ_PB1176_AACI		(IRQ_PB1176_GIC_START + 19)	/* Audio Codec */
-
-#define IRQ_PB1176_TIMER0_1	(IRQ_PB1176_GIC_START + 22)
-#define IRQ_PB1176_TIMER2_3	(IRQ_PB1176_GIC_START + 23)
-#define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
-
-#define IRQ_PB1176_GPIO0	-1
-#define IRQ_PB1176_SSP		-1
-#define IRQ_PB1176_SCTL		-1
-
-#define NR_GIC_PB1176		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB1176
- */
-#define NR_IRQS_PB1176		(IRQ_DC1176_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB1176)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB1176
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB1176
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB1176 */
-
-#endif	/* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/include/asm-arm/arch-realview/board-pb11mp.h b/include/asm-arm/arch-realview/board-pb11mp.h
deleted file mode 100644
index a1294d9..0000000
--- a/include/asm-arm/arch-realview/board-pb11mp.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * include/asm-arm/arch-realview/board-pb11mp.h
- *
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_PB11MP_H
-#define __ASM_ARCH_BOARD_PB11MP_H
-
-#include <asm/arch/platform.h>
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PB11MP_UART0_BASE		0x10009000	/* UART 0 */
-#define REALVIEW_PB11MP_UART1_BASE		0x1000A000	/* UART 1 */
-#define REALVIEW_PB11MP_UART2_BASE		0x1000B000	/* UART 2 */
-#define REALVIEW_PB11MP_UART3_BASE		0x1000C000	/* UART 3 */
-#define REALVIEW_PB11MP_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_PB11MP_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
-#define REALVIEW_PB11MP_WATCHDOG_BASE		0x10010000	/* watchdog interface */
-#define REALVIEW_PB11MP_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_PB11MP_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_PB11MP_GPIO0_BASE		0x10013000	/* GPIO port 0 */
-#define REALVIEW_PB11MP_RTC_BASE		0x10017000	/* Real Time Clock */
-#define REALVIEW_PB11MP_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
-#define REALVIEW_PB11MP_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
-#define REALVIEW_PB11MP_SCTL_BASE		0x1001A000	/* System Controller */
-#define REALVIEW_PB11MP_CLCD_BASE		0x10020000	/* CLCD */
-#define REALVIEW_PB11MP_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
-#define REALVIEW_PB11MP_DMC_BASE		0x100E0000	/* DMC configuration */
-#define REALVIEW_PB11MP_SMC_BASE		0x100E1000	/* SMC configuration */
-#define REALVIEW_PB11MP_CAN_BASE		0x100E2000	/* CAN bus */
-#define REALVIEW_PB11MP_CF_BASE			0x18000000	/* Compact flash */
-#define REALVIEW_PB11MP_CF_MEM_BASE		0x18003000	/* SMC for Compact flash */
-#define REALVIEW_PB11MP_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_PB11MP_FLASH0_BASE		0x40000000
-#define REALVIEW_PB11MP_FLASH0_SIZE		SZ_64M
-#define REALVIEW_PB11MP_FLASH1_BASE		0x44000000
-#define REALVIEW_PB11MP_FLASH1_SIZE		SZ_64M
-#define REALVIEW_PB11MP_ETH_BASE		0x4E000000	/* Ethernet */
-#define REALVIEW_PB11MP_USB_BASE		0x4F000000	/* USB */
-#define REALVIEW_PB11MP_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
-#define REALVIEW_PB11MP_LT_BASE			0xC0000000	/* Logic Tile expansion */
-#define REALVIEW_PB11MP_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
-#define REALVIEW_PB11MP_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
-
-#define REALVIEW_PB11MP_SYS_PLD_CTRL1		0x74
-
-/*
- * PB11MPCore PCI regions
- */
-#define REALVIEW_PB11MP_PCI_BASE		0x90040000	/* PCI-X Unit base */
-#define REALVIEW_PB11MP_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
-#define REALVIEW_PB11MP_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
-
-#define REALVIEW_PB11MP_PCI_BASE_SIZE		0x10000		/* 16 Kb */
-#define REALVIEW_PB11MP_PCI_IO_SIZE		0x1000		/* 4 Kb */
-#define REALVIEW_PB11MP_PCI_MEM_SIZE		0x20000000	/* 512 MB */
-
-/*
- * Testchip peripheral and fpga gic regions
- */
-#define REALVIEW_TC11MP_SCU_BASE		0x1F000000	/* IRQ, Test chip */
-#define REALVIEW_TC11MP_GIC_CPU_BASE		0x1F000100	/* Test chip interrupt controller CPU interface */
-#define REALVIEW_TC11MP_TWD_BASE		0x1F000700
-#define REALVIEW_TC11MP_TWD_SIZE		0x00000100
-#define REALVIEW_TC11MP_GIC_DIST_BASE		0x1F001000	/* Test chip interrupt controller distributor */
-#define REALVIEW_TC11MP_L220_BASE		0x1F002000	/* L220 registers */
-
-/*
- * Irqs
- */
-#define IRQ_TC11MP_GIC_START			32
-#define IRQ_PB11MP_GIC_START			64
-
-/*
- * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
- */
-#define IRQ_TC11MP_AACI		(IRQ_TC11MP_GIC_START + 0)
-#define IRQ_TC11MP_TIMER0_1	(IRQ_TC11MP_GIC_START + 1)
-#define IRQ_TC11MP_TIMER2_3	(IRQ_TC11MP_GIC_START + 2)
-#define IRQ_TC11MP_USB		(IRQ_TC11MP_GIC_START + 3)
-#define IRQ_TC11MP_UART0	(IRQ_TC11MP_GIC_START + 4)
-#define IRQ_TC11MP_UART1	(IRQ_TC11MP_GIC_START + 5)
-#define IRQ_TC11MP_RTC		(IRQ_TC11MP_GIC_START + 6)
-#define IRQ_TC11MP_KMI0		(IRQ_TC11MP_GIC_START + 7)
-#define IRQ_TC11MP_KMI1		(IRQ_TC11MP_GIC_START + 8)
-#define IRQ_TC11MP_ETH		(IRQ_TC11MP_GIC_START + 9)
-#define IRQ_TC11MP_PB_IRQ1	(IRQ_TC11MP_GIC_START + 10)		/* main GIC */
-#define IRQ_TC11MP_PB_IRQ2	(IRQ_TC11MP_GIC_START + 11)		/* tile GIC */
-#define IRQ_TC11MP_PB_FIQ1	(IRQ_TC11MP_GIC_START + 12)		/* main GIC */
-#define IRQ_TC11MP_PB_FIQ2	(IRQ_TC11MP_GIC_START + 13)		/* tile GIC */
-#define IRQ_TC11MP_MMCI0A	(IRQ_TC11MP_GIC_START + 14)
-#define IRQ_TC11MP_MMCI0B	(IRQ_TC11MP_GIC_START + 15)
-
-#define IRQ_TC11MP_PMU_CPU0	(IRQ_TC11MP_GIC_START + 17)
-#define IRQ_TC11MP_PMU_CPU1	(IRQ_TC11MP_GIC_START + 18)
-#define IRQ_TC11MP_PMU_CPU2	(IRQ_TC11MP_GIC_START + 19)
-#define IRQ_TC11MP_PMU_CPU3	(IRQ_TC11MP_GIC_START + 20)
-#define IRQ_TC11MP_PMU_SCU0	(IRQ_TC11MP_GIC_START + 21)
-#define IRQ_TC11MP_PMU_SCU1	(IRQ_TC11MP_GIC_START + 22)
-#define IRQ_TC11MP_PMU_SCU2	(IRQ_TC11MP_GIC_START + 23)
-#define IRQ_TC11MP_PMU_SCU3	(IRQ_TC11MP_GIC_START + 24)
-#define IRQ_TC11MP_PMU_SCU4	(IRQ_TC11MP_GIC_START + 25)
-#define IRQ_TC11MP_PMU_SCU5	(IRQ_TC11MP_GIC_START + 26)
-#define IRQ_TC11MP_PMU_SCU6	(IRQ_TC11MP_GIC_START + 27)
-#define IRQ_TC11MP_PMU_SCU7	(IRQ_TC11MP_GIC_START + 28)
-
-#define IRQ_TC11MP_L220_EVENT	(IRQ_TC11MP_GIC_START + 29)
-#define IRQ_TC11MP_L220_SLAVE	(IRQ_TC11MP_GIC_START + 30)
-#define IRQ_TC11MP_L220_DECODE	(IRQ_TC11MP_GIC_START + 31)
-
-/*
- * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
- */
-#define IRQ_PB11MP_WATCHDOG	(IRQ_PB11MP_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PB11MP_SOFT		(IRQ_PB11MP_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PB11MP_COMMRx	(IRQ_PB11MP_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PB11MP_COMMTx	(IRQ_PB11MP_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PB11MP_GPIO0	(IRQ_PB11MP_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PB11MP_GPIO1	(IRQ_PB11MP_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PB11MP_GPIO2	(IRQ_PB11MP_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PB11MP_RTC_GIC1	(IRQ_PB11MP_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PB11MP_SSP		(IRQ_PB11MP_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PB11MP_UART0_GIC1	(IRQ_PB11MP_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PB11MP_UART1_GIC1	(IRQ_PB11MP_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PB11MP_UART2	(IRQ_PB11MP_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PB11MP_UART3	(IRQ_PB11MP_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PB11MP_SCI		(IRQ_PB11MP_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PB11MP_MMCI0A_GIC1	(IRQ_PB11MP_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PB11MP_MMCI0B_GIC1	(IRQ_PB11MP_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PB11MP_AACI_GIC1	(IRQ_PB11MP_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PB11MP_KMI0_GIC1	(IRQ_PB11MP_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB11MP_KMI1_GIC1	(IRQ_PB11MP_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB11MP_CHARLCD	(IRQ_PB11MP_GIC_START + 22)	/* Character LCD */
-#define IRQ_PB11MP_CLCD		(IRQ_PB11MP_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PB11MP_DMAC		(IRQ_PB11MP_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB11MP_PWRFAIL	(IRQ_PB11MP_GIC_START + 25)	/* Power failure */
-#define IRQ_PB11MP_PISMO	(IRQ_PB11MP_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PB11MP_DoC		(IRQ_PB11MP_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PB11MP_ETH_GIC1	(IRQ_PB11MP_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PB11MP_USB_GIC1	(IRQ_PB11MP_GIC_START + 29)	/* USB controller */
-#define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
-
-#define IRQ_PB11MP_SMC		-1
-#define IRQ_PB11MP_SCTL		-1
-
-#define NR_GIC_PB11MP		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB11MP
- */
-#define NR_IRQS_PB11MP		(IRQ_TC11MP_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB11MP)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB11MP
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB11MP
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB11MP */
-
-#endif	/* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/include/asm-arm/arch-realview/debug-macro.S b/include/asm-arm/arch-realview/debug-macro.S
deleted file mode 100644
index c8c860c..0000000
--- a/include/asm-arm/arch-realview/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/include/asm-arm/arch-realview/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx,      #0x10000000
-		movne	\rx,      #0xf0000000	@ virtual base
-		orr	\rx, \rx, #0x00009000
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/include/asm-arm/arch-realview/dma.h b/include/asm-arm/arch-realview/dma.h
deleted file mode 100644
index 8342e3f..0000000
--- a/include/asm-arm/arch-realview/dma.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/dma.h
- *
- *  Copyright (C) 2003 ARM Limited.
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-realview/entry-macro.S b/include/asm-arm/arch-realview/entry-macro.S
deleted file mode 100644
index 31a39a7..0000000
--- a/include/asm-arm/arch-realview/entry-macro.S
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * include/asm-arm/arch-realview/entry-macro.S
- *
- * Low-level IRQ helper macros for RealView platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-#include <asm/hardware/gic.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =gic_cpu_base_addr
-		ldr	\base, [\base]
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		/*
-		 * The interrupt numbering scheme is defined in the
-		 * interrupt controller spec.  To wit:
-		 *
-		 * Interrupts 0-15 are IPI
-		 * 16-28 are reserved
-		 * 29-31 are local.  We allow 30 to be used for the watchdog.
-		 * 32-1020 are global
-		 * 1021-1022 are reserved
-		 * 1023 is "spurious" (no interrupt)
-		 *
-		 * For now, we ignore all local interrupts so only return an interrupt if it's
-		 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
-		 *
-		 * A simple read from the controller will tell us the number of the highest
-                 * priority enabled interrupt.  We then just need to check whether it is in the
-		 * valid range for an IRQ (30-1020 inclusive).
-		 */
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
-
-		ldr	\tmp, =1021
-
-		bic     \irqnr, \irqstat, #0x1c00
-
-		cmp     \irqnr, #29
-		cmpcc	\irqnr, \irqnr
-		cmpne	\irqnr, \tmp
-		cmpcs	\irqnr, \irqnr
-
-		.endm
-
-		/* We assume that irqstat (the raw value of the IRQ acknowledge
-		 * register) is preserved from the macro above.
-		 * If there is an IPI, we immediately signal end of interrupt on the
-		 * controller, since this requires the original irqstat value which
-		 * we won't easily be able to recreate later.
-		 */
-
-		.macro test_for_ipi, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		cmp	\irqnr, #16
-		strcc	\irqstat, [\base, #GIC_CPU_EOI]
-		cmpcs	\irqnr, \irqnr
-		.endm
-
-		/* As above, this assumes that irqstat and base are preserved.. */
-
-		.macro test_for_ltirq, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		mov 	\tmp, #0
-		cmp	\irqnr, #29
-		moveq	\tmp, #1
-		streq	\irqstat, [\base, #GIC_CPU_EOI]
-		cmp	\tmp, #0
-		.endm
diff --git a/include/asm-arm/arch-realview/hardware.h b/include/asm-arm/arch-realview/hardware.h
deleted file mode 100644
index 1ee8313..0000000
--- a/include/asm-arm/arch-realview/hardware.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/hardware.h
- *
- *  This file contains the hardware definitions of the RealView boards.
- *
- *  Copyright (C) 2003 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + 0xf0000000)
-#define __io_address(n)		__io(IO_ADDRESS(n))
-
-#endif
diff --git a/include/asm-arm/arch-realview/io.h b/include/asm-arm/arch-realview/io.h
deleted file mode 100644
index c70f1df..0000000
--- a/include/asm-arm/arch-realview/io.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/io.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-
-#define __io(a)			__io(a)
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-realview/irqs.h b/include/asm-arm/arch-realview/irqs.h
deleted file mode 100644
index ccbac59..0000000
--- a/include/asm-arm/arch-realview/irqs.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/irqs.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include <asm/arch/board-eb.h>
-#include <asm/arch/board-pb11mp.h>
-#include <asm/arch/board-pb1176.h>
-
-#define IRQ_LOCALTIMER		29
-#define IRQ_LOCALWDOG		30
-
-#define IRQ_GIC_START		32
-
-#ifndef NR_IRQS
-#error "NR_IRQS not defined by the board-specific files"
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-realview/memory.h b/include/asm-arm/arch-realview/memory.h
deleted file mode 100644
index ed370ab..0000000
--- a/include/asm-arm/arch-realview/memory.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/memory.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET		UL(0x00000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
-#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
-
-#endif
diff --git a/include/asm-arm/arch-realview/platform.h b/include/asm-arm/arch-realview/platform.h
deleted file mode 100644
index 424c0aa..0000000
--- a/include/asm-arm/arch-realview/platform.h
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * linux/include/asm-arm/arch-realview/platform.h
- *
- * Copyright (c) ARM Limited 2003.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_PLATFORM_H
-#define __ASM_ARCH_PLATFORM_H
-
-/*
- * Memory definitions
- */
-#define REALVIEW_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
-#define REALVIEW_BOOT_ROM_HI          0x30000000
-#define REALVIEW_BOOT_ROM_BASE        REALVIEW_BOOT_ROM_HI	 /*  Normal position */
-#define REALVIEW_BOOT_ROM_SIZE        SZ_64M
-
-#define REALVIEW_SSRAM_BASE           /* REALVIEW_SSMC_BASE ? */
-#define REALVIEW_SSRAM_SIZE           SZ_2M
-
-/* 
- *  SDRAM
- */
-#define REALVIEW_SDRAM_BASE           0x00000000
-
-/* 
- *  Logic expansion modules
- * 
- */
-
-
-/* ------------------------------------------------------------------------
- *  RealView Registers
- * ------------------------------------------------------------------------
- * 
- */
-#define REALVIEW_SYS_ID_OFFSET               0x00
-#define REALVIEW_SYS_SW_OFFSET               0x04
-#define REALVIEW_SYS_LED_OFFSET              0x08
-#define REALVIEW_SYS_OSC0_OFFSET             0x0C
-
-#define REALVIEW_SYS_OSC1_OFFSET             0x10
-#define REALVIEW_SYS_OSC2_OFFSET             0x14
-#define REALVIEW_SYS_OSC3_OFFSET             0x18
-#define REALVIEW_SYS_OSC4_OFFSET             0x1C	/* OSC1 for RealView/AB */
-
-#define REALVIEW_SYS_LOCK_OFFSET             0x20
-#define REALVIEW_SYS_100HZ_OFFSET            0x24
-#define REALVIEW_SYS_CFGDATA1_OFFSET         0x28
-#define REALVIEW_SYS_CFGDATA2_OFFSET         0x2C
-#define REALVIEW_SYS_FLAGS_OFFSET            0x30
-#define REALVIEW_SYS_FLAGSSET_OFFSET         0x30
-#define REALVIEW_SYS_FLAGSCLR_OFFSET         0x34
-#define REALVIEW_SYS_NVFLAGS_OFFSET          0x38
-#define REALVIEW_SYS_NVFLAGSSET_OFFSET       0x38
-#define REALVIEW_SYS_NVFLAGSCLR_OFFSET       0x3C
-#define REALVIEW_SYS_RESETCTL_OFFSET         0x40
-#define REALVIEW_SYS_PCICTL_OFFSET           0x44
-#define REALVIEW_SYS_MCI_OFFSET              0x48
-#define REALVIEW_SYS_FLASH_OFFSET            0x4C
-#define REALVIEW_SYS_CLCD_OFFSET             0x50
-#define REALVIEW_SYS_CLCDSER_OFFSET          0x54
-#define REALVIEW_SYS_BOOTCS_OFFSET           0x58
-#define REALVIEW_SYS_24MHz_OFFSET            0x5C
-#define REALVIEW_SYS_MISC_OFFSET             0x60
-#define REALVIEW_SYS_IOSEL_OFFSET            0x70
-#define REALVIEW_SYS_PROCID_OFFSET           0x84
-#define REALVIEW_SYS_TEST_OSC0_OFFSET        0xC0
-#define REALVIEW_SYS_TEST_OSC1_OFFSET        0xC4
-#define REALVIEW_SYS_TEST_OSC2_OFFSET        0xC8
-#define REALVIEW_SYS_TEST_OSC3_OFFSET        0xCC
-#define REALVIEW_SYS_TEST_OSC4_OFFSET        0xD0
-
-#define REALVIEW_SYS_BASE                    0x10000000
-#define REALVIEW_SYS_ID                      (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET)
-#define REALVIEW_SYS_SW                      (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET)
-#define REALVIEW_SYS_LED                     (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET)
-#define REALVIEW_SYS_OSC0                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET)
-#define REALVIEW_SYS_OSC1                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET)
-
-#define REALVIEW_SYS_LOCK                    (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET)
-#define REALVIEW_SYS_100HZ                   (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET)
-#define REALVIEW_SYS_CFGDATA1                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET)
-#define REALVIEW_SYS_CFGDATA2                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET)
-#define REALVIEW_SYS_FLAGS                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET)
-#define REALVIEW_SYS_FLAGSSET                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET)
-#define REALVIEW_SYS_FLAGSCLR                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET)
-#define REALVIEW_SYS_NVFLAGS                 (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET)
-#define REALVIEW_SYS_NVFLAGSSET              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET)
-#define REALVIEW_SYS_NVFLAGSCLR              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET)
-#define REALVIEW_SYS_RESETCTL                (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET)
-#define REALVIEW_SYS_PCICTL                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET)
-#define REALVIEW_SYS_MCI                     (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET)
-#define REALVIEW_SYS_FLASH                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET)
-#define REALVIEW_SYS_CLCD                    (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET)
-#define REALVIEW_SYS_CLCDSER                 (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET)
-#define REALVIEW_SYS_BOOTCS                  (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET)
-#define REALVIEW_SYS_24MHz                   (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET)
-#define REALVIEW_SYS_MISC                    (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET)
-#define REALVIEW_SYS_IOSEL                   (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET)
-#define REALVIEW_SYS_PROCID                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PROCID_OFFSET)
-#define REALVIEW_SYS_TEST_OSC0               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET)
-#define REALVIEW_SYS_TEST_OSC1               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET)
-#define REALVIEW_SYS_TEST_OSC2               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET)
-#define REALVIEW_SYS_TEST_OSC3               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
-#define REALVIEW_SYS_TEST_OSC4               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
-
-/* 
- * Values for REALVIEW_SYS_RESET_CTRL
- */
-#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR    0x01
-#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT   0x02
-#define REALVIEW_SYS_CTRL_RESET_DLLRESET     0x03
-#define REALVIEW_SYS_CTRL_RESET_PLLRESET     0x04
-#define REALVIEW_SYS_CTRL_RESET_POR          0x05
-#define REALVIEW_SYS_CTRL_RESET_DoC          0x06
-
-#define REALVIEW_SYS_CTRL_LED         (1 << 0)
-
-
-/* ------------------------------------------------------------------------
- *  RealView control registers
- * ------------------------------------------------------------------------
- */
-
-/* 
- * REALVIEW_IDFIELD
- *
- * 31:24 = manufacturer (0x41 = ARM)
- * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
- * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
- * 11:4  = build value
- * 3:0   = revision number (0x1 = rev B (AHB))
- */
-
-/*
- * REALVIEW_SYS_LOCK
- *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
- *     SYS_CLD, SYS_BOOTCS
- */
-#define REALVIEW_SYS_LOCK_LOCKED    (1 << 16)
-#define REALVIEW_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
-
-/*
- * REALVIEW_SYS_FLASH
- */
-#define REALVIEW_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
-
-/*
- * REALVIEW_INTREG
- *     - used to acknowledge and control MMCI and UART interrupts 
- */
-#define REALVIEW_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
-#define REALVIEW_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
-#define REALVIEW_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
-                                                /* write 1 to acknowledge and clear               */
-#define REALVIEW_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
-#define REALVIEW_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
-
-/*
- * RealView common peripheral addresses
- */
-#define REALVIEW_SCTL_BASE            0x10001000	/* System controller */
-#define REALVIEW_I2C_BASE             0x10002000	/* I2C control */
-#define REALVIEW_AACI_BASE            0x10004000	/* Audio */
-#define REALVIEW_MMCI0_BASE           0x10005000	/* MMC interface */
-#define REALVIEW_KMI0_BASE            0x10006000	/* KMI interface */
-#define REALVIEW_KMI1_BASE            0x10007000	/* KMI 2nd interface */
-#define REALVIEW_CHAR_LCD_BASE        0x10008000	/* Character LCD */
-#define REALVIEW_SCI_BASE             0x1000E000	/* Smart card controller */
-#define REALVIEW_GPIO1_BASE           0x10014000	/* GPIO port 1 */
-#define REALVIEW_GPIO2_BASE           0x10015000	/* GPIO port 2 */
-#define REALVIEW_DMC_BASE             0x10018000	/* DMC configuration */
-#define REALVIEW_DMAC_BASE            0x10030000	/* DMA controller */
-
-/* PCI space */
-#define REALVIEW_PCI_BASE             0x41000000	/* PCI Interface */
-#define REALVIEW_PCI_CFG_BASE	      0x42000000
-#define REALVIEW_PCI_MEM_BASE0        0x44000000
-#define REALVIEW_PCI_MEM_BASE1        0x50000000
-#define REALVIEW_PCI_MEM_BASE2        0x60000000
-/* Sizes of above maps */
-#define REALVIEW_PCI_BASE_SIZE	       0x01000000
-#define REALVIEW_PCI_CFG_BASE_SIZE    0x02000000
-#define REALVIEW_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
-#define REALVIEW_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
-#define REALVIEW_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
-
-#define REALVIEW_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
-#define REALVIEW_LT_BASE              0x80000000	/* Logic Tile expansion */
-
-/*
- * Disk on Chip
- */
-#define REALVIEW_DOC_BASE             0x2C000000
-#define REALVIEW_DOC_SIZE             (16 << 20)
-#define REALVIEW_DOC_PAGE_SIZE        512
-#define REALVIEW_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
-
-#define ERASE_UNIT_PAGES    32
-#define START_PAGE          0x80
-
-/* 
- *  LED settings, bits [7:0]
- */
-#define REALVIEW_SYS_LED0             (1 << 0)
-#define REALVIEW_SYS_LED1             (1 << 1)
-#define REALVIEW_SYS_LED2             (1 << 2)
-#define REALVIEW_SYS_LED3             (1 << 3)
-#define REALVIEW_SYS_LED4             (1 << 4)
-#define REALVIEW_SYS_LED5             (1 << 5)
-#define REALVIEW_SYS_LED6             (1 << 6)
-#define REALVIEW_SYS_LED7             (1 << 7)
-
-#define ALL_LEDS                  0xFF
-
-#define LED_BANK                  REALVIEW_SYS_LED
-
-/* 
- * Control registers
- */
-#define REALVIEW_IDFIELD_OFFSET	0x0	/* RealView build information */
-#define REALVIEW_FLASHPROG_OFFSET	0x4	/* Flash devices */
-#define REALVIEW_INTREG_OFFSET		0x8	/* Interrupt control */
-#define REALVIEW_DECODE_OFFSET		0xC	/* Fitted logic modules */
-
-/* 
- *  Application Flash
- * 
- */
-#define FLASH_BASE                      REALVIEW_FLASH_BASE
-#define FLASH_SIZE                      REALVIEW_FLASH_SIZE
-#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
-#define FLASH_BLOCK_SIZE                SZ_128K
-
-/* 
- *  Boot Flash
- * 
- */
-#define EPROM_BASE                      REALVIEW_BOOT_ROM_HI
-#define EPROM_SIZE                      REALVIEW_BOOT_ROM_SIZE
-#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
-
-/* 
- *  Clean base - dummy
- * 
- */
-#define CLEAN_BASE                      EPROM_BASE
-
-/*
- * System controller bit assignment
- */
-#define REALVIEW_REFCLK	0
-#define REALVIEW_TIMCLK	1
-
-#define REALVIEW_TIMER1_EnSel	15
-#define REALVIEW_TIMER2_EnSel	17
-#define REALVIEW_TIMER3_EnSel	19
-#define REALVIEW_TIMER4_EnSel	21
-
-
-#define MAX_TIMER                       2
-#define MAX_PERIOD                      699050
-#define TICKS_PER_uSEC                  1
-
-/* 
- *  These are useconds NOT ticks.  
- * 
- */
-#define mSEC_1                          1000
-#define mSEC_5                          (mSEC_1 * 5)
-#define mSEC_10                         (mSEC_1 * 10)
-#define mSEC_25                         (mSEC_1 * 25)
-#define SEC_1                           (mSEC_1 * 1000)
-
-#define REALVIEW_CSR_BASE             0x10000000
-#define REALVIEW_CSR_SIZE             0x10000000
-
-#endif	/* __ASM_ARCH_PLATFORM_H */
diff --git a/include/asm-arm/arch-realview/system.h b/include/asm-arm/arch-realview/system.h
deleted file mode 100644
index bff3d3f..0000000
--- a/include/asm-arm/arch-realview/system.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/system.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-#include <asm/arch/platform.h>
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET;
-	unsigned int val;
-
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	val = __raw_readl(hdr_ctrl);
-	val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR;
-	__raw_writel(val, hdr_ctrl);
-}
-
-#endif
diff --git a/include/asm-arm/arch-realview/timex.h b/include/asm-arm/arch-realview/timex.h
deleted file mode 100644
index 5b9d82d..0000000
--- a/include/asm-arm/arch-realview/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/timex.h
- *
- *  RealView architecture timex specifications
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/include/asm-arm/arch-realview/uncompress.h b/include/asm-arm/arch-realview/uncompress.h
deleted file mode 100644
index 3f7ae2e..0000000
--- a/include/asm-arm/arch-realview/uncompress.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/uncompress.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <asm/arch/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/board-eb.h>
-#include <asm/arch/board-pb11mp.h>
-#include <asm/arch/board-pb1176.h>
-
-#define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
-#define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
-#define AMBA_UART_CR(base)	(*(volatile unsigned char *)((base) + 0x30))
-#define AMBA_UART_FR(base)	(*(volatile unsigned char *)((base) + 0x18))
-
-/*
- * Return the UART base address
- */
-static inline unsigned long get_uart_base(void)
-{
-	if (machine_is_realview_eb())
-		return REALVIEW_EB_UART0_BASE;
-	else if (machine_is_realview_pb11mp())
-		return REALVIEW_PB11MP_UART0_BASE;
-	else if (machine_is_realview_pb1176())
-		return REALVIEW_PB1176_UART0_BASE;
-	else
-		return 0;
-}
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	unsigned long base = get_uart_base();
-
-	while (AMBA_UART_FR(base) & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR(base) = c;
-}
-
-static inline void flush(void)
-{
-	unsigned long base = get_uart_base();
-
-	while (AMBA_UART_FR(base) & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-realview/vmalloc.h b/include/asm-arm/arch-realview/vmalloc.h
deleted file mode 100644
index 0ad49af..0000000
--- a/include/asm-arm/arch-realview/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/vmalloc.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END		(PAGE_OFFSET + 0x18000000)
diff --git a/include/asm-arm/arch-rpc/acornfb.h b/include/asm-arm/arch-rpc/acornfb.h
deleted file mode 100644
index ecb7733..0000000
--- a/include/asm-arm/arch-rpc/acornfb.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/acornfb.h
- *
- *  Copyright (C) 1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  AcornFB architecture specific code
- */
-
-#define acornfb_bandwidth(var) ((var)->pixclock * 8 / (var)->bits_per_pixel)
-
-static inline int
-acornfb_valid_pixrate(struct fb_var_screeninfo *var)
-{
-	u_long limit;
-
-	if (!var->pixclock)
-		return 0;
-
-	/*
-	 * Limits below are taken from RISC OS bandwidthlimit file
-	 */
-	if (current_par.using_vram) {
-		if (current_par.vram_half_sam == 2048)
-			limit = 6578;
-		else
-			limit = 13157;
-	} else {
-		limit = 26315;
-	}
-
-	return acornfb_bandwidth(var) >= limit;
-}
-
-/*
- * Try to find the best PLL parameters for the pixel clock.
- * This algorithm seems to give best predictable results,
- * and produces the same values as detailed in the VIDC20
- * data sheet.
- */
-static inline u_int
-acornfb_vidc20_find_pll(u_int pixclk)
-{
-	u_int r, best_r = 2, best_v = 2;
-	int best_d = 0x7fffffff;
-
-	for (r = 2; r <= 32; r++) {
-		u_int rr, v, p;
-		int d;
-
-		rr = 41667 * r;
-
-		v = (rr + pixclk / 2) / pixclk;
-
-		if (v > 32 || v < 2)
-			continue;
-
-		p = (rr + v / 2) / v;
-
-		d = pixclk - p;
-
-		if (d < 0)
-			d = -d;
-
-		if (d < best_d) {
-			best_d = d;
-			best_v = v - 1;
-			best_r = r - 1;
-		}
-
-		if (d == 0)
-			break;
-	}
-
-	return best_v << 8 | best_r;
-}
-
-static inline void
-acornfb_vidc20_find_rates(struct vidc_timing *vidc,
-			  struct fb_var_screeninfo *var)
-{
-	u_int div;
-
-	/* Select pixel-clock divisor to keep PLL in range */
-	div = var->pixclock / 9090; /*9921*/
-
-	/* Limit divisor */
-	if (div == 0)
-		div = 1;
-	if (div > 8)
-		div = 8;
-
-	/* Encode divisor to VIDC20 setting */
-	switch (div) {
-	case 1:	vidc->control |= VIDC20_CTRL_PIX_CK;  break;
-	case 2:	vidc->control |= VIDC20_CTRL_PIX_CK2; break;
-	case 3:	vidc->control |= VIDC20_CTRL_PIX_CK3; break;
-	case 4:	vidc->control |= VIDC20_CTRL_PIX_CK4; break;
-	case 5:	vidc->control |= VIDC20_CTRL_PIX_CK5; break;
-	case 6:	vidc->control |= VIDC20_CTRL_PIX_CK6; break;
-	case 7:	vidc->control |= VIDC20_CTRL_PIX_CK7; break;
-	case 8: vidc->control |= VIDC20_CTRL_PIX_CK8; break;
-	}
-
-	/*
-	 * With VRAM, the FIFO can be set to the highest possible setting
-	 * because there are no latency considerations for other memory
-	 * accesses. However, in 64 bit bus mode the FIFO preload value
-	 * must not be set to VIDC20_CTRL_FIFO_28 because this will let
-	 * the FIFO overflow. See VIDC20 manual page 33 (6.0 Setting the
-	 * FIFO preload value).
-	 */
-	if (current_par.using_vram) {
-		if (current_par.vram_half_sam == 2048)
-			vidc->control |= VIDC20_CTRL_FIFO_24;
-		else
-			vidc->control |= VIDC20_CTRL_FIFO_28;
-	} else {
-		unsigned long bandwidth = acornfb_bandwidth(var);
-
-		/* Encode bandwidth as VIDC20 setting */
-		if (bandwidth > 33334)		/* < 30.0MB/s */
-			vidc->control |= VIDC20_CTRL_FIFO_16;
-		else if (bandwidth > 26666)	/* < 37.5MB/s */
-			vidc->control |= VIDC20_CTRL_FIFO_20;
-		else if (bandwidth > 22222)	/* < 45.0MB/s */
-			vidc->control |= VIDC20_CTRL_FIFO_24;
-		else				/* > 45.0MB/s */
-			vidc->control |= VIDC20_CTRL_FIFO_28;
-	}
-
-	/* Find the PLL values */
-	vidc->pll_ctl = acornfb_vidc20_find_pll(var->pixclock / div);
-}
-
-#define acornfb_default_control()	(VIDC20_CTRL_PIX_VCLK)
-#define acornfb_default_econtrol()	(VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3))
diff --git a/include/asm-arm/arch-rpc/debug-macro.S b/include/asm-arm/arch-rpc/debug-macro.S
deleted file mode 100644
index c634c8d..0000000
--- a/include/asm-arm/arch-rpc/debug-macro.S
+++ /dev/null
@@ -1,25 +0,0 @@
-/* linux/include/asm-arm/arch-rpc/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x03000000
-		movne	\rx, #0xe0000000
-		orr	\rx, \rx, #0x00010000
-		orr	\rx, \rx, #0x00000fe0
-		.endm
-
-#define UART_SHIFT	2
-#define FLOW_CONTROL
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-rpc/dma.h b/include/asm-arm/arch-rpc/dma.h
deleted file mode 100644
index d24a27e3..0000000
--- a/include/asm-arm/arch-rpc/dma.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/dma.h
- *
- *  Copyright (C) 1997 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS		0xd0000000
-#define MAX_DMA_CHANNELS	8
-
-#define DMA_0			0
-#define DMA_1			1
-#define DMA_2			2
-#define DMA_3			3
-#define DMA_S0			4
-#define DMA_S1			5
-#define DMA_VIRTUAL_FLOPPY	6
-#define DMA_VIRTUAL_SOUND	7
-
-#define DMA_FLOPPY		DMA_VIRTUAL_FLOPPY
-
-#endif /* _ASM_ARCH_DMA_H */
-
diff --git a/include/asm-arm/arch-rpc/entry-macro.S b/include/asm-arm/arch-rpc/entry-macro.S
deleted file mode 100644
index 5bd5555..0000000
--- a/include/asm-arm/arch-rpc/entry-macro.S
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <asm/arch/hardware.h>
-#include <asm/hardware/entry-macro-iomd.S>
-
-	.equ	ioc_base_high, IOC_BASE & 0xff000000
-	.equ	ioc_base_low, IOC_BASE & 0x00ff0000
-
-	.macro  get_irqnr_preamble, base, tmp
-	mov	\base, #ioc_base_high		@ point at IOC
-	.if	ioc_base_low
-	orr	\base, \base, #ioc_base_low
-	.endif
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
diff --git a/include/asm-arm/arch-rpc/hardware.h b/include/asm-arm/arch-rpc/hardware.h
deleted file mode 100644
index 7480f4e..0000000
--- a/include/asm-arm/arch-rpc/hardware.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/hardware.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file contains the hardware definitions of the RiscPC series machines.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/arch/memory.h>
-
-#ifndef __ASSEMBLY__
-#define IOMEM(x) ((void __iomem *)(unsigned long)(x))
-#else
-#define IOMEM(x) x
-#endif /* __ASSEMBLY__ */
-
-/*
- * What hardware must be present
- */
-#define HAS_IOMD
-#define HAS_VIDC20
-
-/* Hardware addresses of major areas.
- *  *_START is the physical address
- *  *_SIZE  is the size of the region
- *  *_BASE  is the virtual address
- */
-#define RAM_SIZE		0x10000000
-#define RAM_START		0x10000000
-
-#define EASI_SIZE		0x08000000	/* EASI I/O */
-#define EASI_START		0x08000000
-#define EASI_BASE		0xe5000000
-
-#define IO_START		0x03000000	/* I/O */
-#define IO_SIZE			0x01000000
-#define IO_BASE			IOMEM(0xe0000000)
-
-#define SCREEN_START		0x02000000	/* VRAM */
-#define SCREEN_END		0xdfc00000
-#define SCREEN_BASE		0xdf800000
-
-#define UNCACHEABLE_ADDR	0xdf010000
-
-/*
- * IO Addresses
- */
-#define VIDC_BASE		IOMEM(0xe0400000)
-#define EXPMASK_BASE		0xe0360000
-#define IOMD_BASE		IOMEM(0xe0200000)
-#define IOC_BASE		IOMEM(0xe0200000)
-#define PCIO_BASE		IOMEM(0xe0010000)
-#define FLOPPYDMA_BASE		IOMEM(0xe002a000)
-
-#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
-
-#define IO_EC_EASI_BASE		0x81400000
-#define IO_EC_IOC4_BASE		0x8009c000
-#define IO_EC_IOC_BASE		0x80090000
-#define IO_EC_MEMC8_BASE	0x8000ac00
-#define IO_EC_MEMC_BASE		0x80000000
-
-#define NETSLOT_BASE		0x0302b000
-#define NETSLOT_SIZE		0x00001000
-
-#define PODSLOT_IOC0_BASE	0x03240000
-#define PODSLOT_IOC4_BASE	0x03270000
-#define PODSLOT_IOC_SIZE	(1 << 14)
-#define PODSLOT_MEMC_BASE	0x03000000
-#define PODSLOT_MEMC_SIZE	(1 << 14)
-#define PODSLOT_EASI_BASE	0x08000000
-#define PODSLOT_EASI_SIZE	(1 << 24)
-
-#define	EXPMASK_STATUS		(EXPMASK_BASE + 0x00)
-#define EXPMASK_ENABLE		(EXPMASK_BASE + 0x04)
-
-#endif
diff --git a/include/asm-arm/arch-rpc/io.h b/include/asm-arm/arch-rpc/io.h
deleted file mode 100644
index 0d10d459..0000000
--- a/include/asm-arm/arch-rpc/io.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/io.h
- *
- *  Copyright (C) 1997 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *  06-Dec-1997	RMK	Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * GCC is totally crap at loading/storing data.  We try to persuade it
- * to do the right thing by using these whereever possible instead of
- * the above.
- */
-#define __arch_base_getb(b,o)			\
- ({						\
-	unsigned int __v, __r = (b);		\
-	__asm__ __volatile__(			\
-		"ldrb	%0, [%1, %2]"		\
-		: "=r" (__v)			\
-		: "r" (__r), "Ir" (o));		\
-	__v;					\
- })
-
-#define __arch_base_getl(b,o)			\
- ({						\
-	unsigned int __v, __r = (b);		\
-	__asm__ __volatile__(			\
-		"ldr	%0, [%1, %2]"		\
-		: "=r" (__v)			\
-		: "r" (__r), "Ir" (o));		\
-	__v;					\
- })
-
-#define __arch_base_putb(v,b,o)			\
- ({						\
-	unsigned int __r = (b);			\
-	__asm__ __volatile__(			\
-		"strb	%0, [%1, %2]"		\
-		:				\
-		: "r" (v), "r" (__r), "Ir" (o));\
- })
-
-#define __arch_base_putl(v,b,o)			\
- ({						\
-	unsigned int __r = (b);			\
-	__asm__ __volatile__(			\
-		"str	%0, [%1, %2]"		\
-		:				\
-		: "r" (v), "r" (__r), "Ir" (o));\
- })
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses.  PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
- * and are translated to the start of IO.  Note that all addresses are
- * shifted left!
- */
-#define __PORT_PCIO(x)	(!((x) & 0x80000000))
-
-/*
- * Dynamic IO functions.
- */
-static inline void __outb (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"strb	%1, [%0, %2, lsl #2]	@ outb"
-	: "=&r" (temp)
-	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-static inline void __outw (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"str	%1, [%0, %2, lsl #2]	@ outw"
-	: "=&r" (temp)
-	: "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-static inline void __outl (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"str	%1, [%0, %2, lsl #2]	@ outl"
-	: "=&r" (temp)
-	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-#define DECLARE_DYN_IN(sz,fnsuffix,instr)					\
-static inline unsigned sz __in##fnsuffix (unsigned int port)		\
-{										\
-	unsigned long temp, value;						\
-	__asm__ __volatile__(							\
-	"tst	%2, #0x80000000\n\t"						\
-	"mov	%0, %4\n\t"							\
-	"addeq	%0, %0, %3\n\t"							\
-	"ldr" instr "	%1, [%0, %2, lsl #2]	@ in" #fnsuffix			\
-	: "=&r" (temp), "=r" (value)						\
-	: "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)		\
-	: "cc");								\
-	return (unsigned sz)value;						\
-}
-
-static inline void __iomem *__deprecated __ioaddr(unsigned int port)
-{
-	void __iomem *ret;
-	if (__PORT_PCIO(port))
-		ret = PCIO_BASE;
-	else
-		ret = IO_BASE;
-	return ret + (port << 2);
-}
-
-#define DECLARE_IO(sz,fnsuffix,instr)	\
-	DECLARE_DYN_IN(sz,fnsuffix,instr)
-
-DECLARE_IO(char,b,"b")
-DECLARE_IO(short,w,"")
-DECLARE_IO(int,l,"")
-
-#undef DECLARE_IO
-#undef DECLARE_DYN_IN
-
-/*
- * Constant address IO functions
- *
- * These have to be macros for the 'J' constraint to work -
- * +/-4096 immediate operand.
- */
-#define __outbc(value,port)							\
-({										\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"strb	%0, [%1, %2]	@ outbc"				\
-		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"strb	%0, [%1, %2]	@ outbc"				\
-		: : "r" (value), "r" (IO_BASE), "r" ((port) << 2));		\
-})
-
-#define __inbc(port)								\
-({										\
-	unsigned char result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldrb	%0, [%1, %2]	@ inbc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldrb	%0, [%1, %2]	@ inbc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result;									\
-})
-
-#define __outwc(value,port)							\
-({										\
-	unsigned long __v = value;						\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outwc"				\
-		: : "r" (__v|__v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2));	\
-	else									\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outwc"				\
-		: : "r" (__v|__v<<16), "r" (IO_BASE), "r" ((port) << 2));		\
-})
-
-#define __inwc(port)								\
-({										\
-	unsigned short result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inwc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inwc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result & 0xffff;							\
-})
-
-#define __outlc(value,port)							\
-({										\
-	unsigned long __v = value;						\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outlc"				\
-		: : "r" (__v), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outlc"				\
-		: : "r" (__v), "r" (IO_BASE), "r" ((port) << 2));		\
-})
-
-#define __inlc(port)								\
-({										\
-	unsigned long result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inlc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inlc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result;									\
-})
-
-#define __ioaddrc(port)		__ioaddr(port)
-
-#define inb(p)	 	(__builtin_constant_p((p)) ? __inbc(p)    : __inb(p))
-#define inw(p)	 	(__builtin_constant_p((p)) ? __inwc(p)    : __inw(p))
-#define inl(p)	 	(__builtin_constant_p((p)) ? __inlc(p)    : __inl(p))
-#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
-#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
-#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
-#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
-/* the following macro is deprecated */
-#define ioaddr(port)	((unsigned long)__ioaddr((port)))
-
-#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
-#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
-
-#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
-#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
-
-/*
- * 1:1 mapping for ioremapped regions.
- */
-#define __mem_pci(x)	(x)
-
-#endif
diff --git a/include/asm-arm/arch-rpc/irqs.h b/include/asm-arm/arch-rpc/irqs.h
deleted file mode 100644
index 27c35b0..0000000
--- a/include/asm-arm/arch-rpc/irqs.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/irqs.h
- *
- *  Copyright (C) 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define IRQ_PRINTER		0
-#define IRQ_BATLOW		1
-#define IRQ_FLOPPYINDEX		2
-#define IRQ_VSYNCPULSE		3
-#define IRQ_POWERON		4
-#define IRQ_TIMER0		5
-#define IRQ_TIMER1		6
-#define IRQ_IMMEDIATE		7
-#define IRQ_EXPCARDFIQ		8
-#define IRQ_HARDDISK		9
-#define IRQ_SERIALPORT		10
-#define IRQ_FLOPPYDISK		12
-#define IRQ_EXPANSIONCARD	13
-#define IRQ_KEYBOARDTX		14
-#define IRQ_KEYBOARDRX		15
-
-#define IRQ_DMA0		16
-#define IRQ_DMA1		17
-#define IRQ_DMA2		18
-#define IRQ_DMA3		19
-#define IRQ_DMAS0		20
-#define IRQ_DMAS1		21
-
-#define FIQ_FLOPPYDATA		0
-#define FIQ_ECONET		2
-#define FIQ_SERIALPORT		4
-#define FIQ_EXPANSIONCARD	6
-#define FIQ_FORCE		7
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START		64
-
-#define IRQ_TIMER		IRQ_TIMER0
-
diff --git a/include/asm-arm/arch-rpc/memory.h b/include/asm-arm/arch-rpc/memory.h
deleted file mode 100644
index 303c424..0000000
--- a/include/asm-arm/arch-rpc/memory.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/memory.h
- *
- *  Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   20-Oct-1996 RMK	Created
- *   31-Dec-1997 RMK	Fixed definitions to reduce warnings
- *   11-Jan-1998 RMK	Uninlined to reduce hits on cache
- *   08-Feb-1998 RMK	Added __virt_to_bus and __bus_to_virt
- *   21-Mar-1999 RMK	Renamed to memory.h
- *		 RMK	Added TASK_SIZE and PAGE_OFFSET
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x10000000)
-
-/*
- * These are exactly the same on the RiscPC as the
- * physical memory view.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
- * Cache flushing area - ROM
- */
-#define FLUSH_BASE_PHYS		0x00000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/include/asm-arm/arch-rpc/system.h b/include/asm-arm/arch-rpc/system.h
deleted file mode 100644
index ca3277d..0000000
--- a/include/asm-arm/arch-rpc/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/system.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/arch/hardware.h>
-#include <asm/hardware/iomd.h>
-#include <asm/io.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	iomd_writeb(0, IOMD_ROMCR0);
-
-	/*
-	 * Jump into the ROM
-	 */
-	cpu_reset(0);
-}
diff --git a/include/asm-arm/arch-rpc/timex.h b/include/asm-arm/arch-rpc/timex.h
deleted file mode 100644
index ed7df64..0000000
--- a/include/asm-arm/arch-rpc/timex.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/timex.h
- *
- *  Copyright (C) 1997, 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  RiscPC architecture timex specifications
- */
-
-/*
- * On the RiscPC, the clock ticks at 2MHz.
- */
-#define CLOCK_TICK_RATE		2000000
-
diff --git a/include/asm-arm/arch-rpc/uncompress.h b/include/asm-arm/arch-rpc/uncompress.h
deleted file mode 100644
index 844e4d4..0000000
--- a/include/asm-arm/arch-rpc/uncompress.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/uncompress.h
- *
- *  Copyright (C) 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VIDMEM ((char *)SCREEN_START)
- 
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-
-int video_size_row;
-unsigned char bytes_per_char_h;
-extern unsigned long con_charconvtable[256];
-
-struct param_struct {
-	unsigned long page_size;
-	unsigned long nr_pages;
-	unsigned long ramdisk_size;
-	unsigned long mountrootrdonly;
-	unsigned long rootdev;
-	unsigned long video_num_cols;
-	unsigned long video_num_rows;
-	unsigned long video_x;
-	unsigned long video_y;
-	unsigned long memc_control_reg;
-	unsigned char sounddefault;
-	unsigned char adfsdrives;
-	unsigned char bytes_per_char_h;
-	unsigned char bytes_per_char_v;
-	unsigned long unused[256/4-11];
-};
-
-static const unsigned long palette_4[16] = {
-	0x00000000,
-	0x000000cc,
-	0x0000cc00,             /* Green   */
-	0x0000cccc,             /* Yellow  */
-	0x00cc0000,             /* Blue    */
-	0x00cc00cc,             /* Magenta */
-	0x00cccc00,             /* Cyan    */
-	0x00cccccc,             /* White   */
-	0x00000000,
-	0x000000ff,
-	0x0000ff00,
-	0x0000ffff,
-	0x00ff0000,
-	0x00ff00ff,
-	0x00ffff00,
-	0x00ffffff
-};
-
-#define palette_setpixel(p)	*(unsigned long *)(IO_START+0x00400000) = 0x10000000|((p) & 255)
-#define palette_write(v)	*(unsigned long *)(IO_START+0x00400000) = 0x00000000|((v) & 0x00ffffff)
-
-/*
- * params_phys is a linker defined symbol - see
- * arch/arm/boot/compressed/Makefile
- */
-extern __attribute__((pure)) struct param_struct *params(void);
-#define params (params())
-
-#ifndef STANDALONE_DEBUG 
-static unsigned long video_num_cols;
-static unsigned long video_num_rows;
-static unsigned long video_x;
-static unsigned long video_y;
-static unsigned char bytes_per_char_v;
-static int white;
-
-/*
- * This does not append a newline
- */
-static void putc(int c)
-{
-	extern void ll_write_char(char *, char c, char white);
-	int x,y;
-	char *ptr;
-
-	x = video_x;
-	y = video_y;
-
-	if (c == '\n') {
-		if (++y >= video_num_rows)
-			y--;
-	} else if (c == '\r') {
-		x = 0;
-	} else {
-		ptr = VIDMEM + ((y*video_num_cols*bytes_per_char_v+x)*bytes_per_char_h);
-		ll_write_char(ptr, c, white);
-		if (++x >= video_num_cols) {
-			x = 0;
-			if ( ++y >= video_num_rows ) {
-				y--;
-			}
-		}
-	}
-
-	video_x = x;
-	video_y = y;
-}
-
-static inline void flush(void)
-{
-}
-
-static void error(char *x);
-
-/*
- * Setup for decompression
- */
-static void arch_decomp_setup(void)
-{
-	int i;
-	struct tag *t = (struct tag *)params;
-	unsigned int nr_pages = 0, page_size = PAGE_SIZE;
-
-	if (t->hdr.tag == ATAG_CORE)
-	{
-		for (; t->hdr.size; t = tag_next(t))
-		{
-			if (t->hdr.tag == ATAG_VIDEOTEXT)
-			{
-				video_num_rows = t->u.videotext.video_lines;
-				video_num_cols = t->u.videotext.video_cols;
-				bytes_per_char_h = t->u.videotext.video_points;
-				bytes_per_char_v = t->u.videotext.video_points;
-				video_x = t->u.videotext.x;
-				video_y = t->u.videotext.y;
-			}
-
-			if (t->hdr.tag == ATAG_MEM)
-			{
-				page_size = PAGE_SIZE;
-				nr_pages += (t->u.mem.size / PAGE_SIZE);
-			}
-		}
-	}
-	else
-	{
-		nr_pages = params->nr_pages;
-		page_size = params->page_size;
-		video_num_rows = params->video_num_rows;
-		video_num_cols = params->video_num_cols;
-		video_x = params->video_x;
-		video_y = params->video_y;
-		bytes_per_char_h = params->bytes_per_char_h;
-		bytes_per_char_v = params->bytes_per_char_v;
-	}
-
-	video_size_row = video_num_cols * bytes_per_char_h;
-	
-	if (bytes_per_char_h == 4)
-		for (i = 0; i < 256; i++)
-			con_charconvtable[i] =
-				(i & 128 ? 1 << 0  : 0) |
-				(i & 64  ? 1 << 4  : 0) |
-				(i & 32  ? 1 << 8  : 0) |
-				(i & 16  ? 1 << 12 : 0) |
-				(i & 8   ? 1 << 16 : 0) |
-				(i & 4   ? 1 << 20 : 0) |
-				(i & 2   ? 1 << 24 : 0) |
-				(i & 1   ? 1 << 28 : 0);
-	else
-		for (i = 0; i < 16; i++)
-			con_charconvtable[i] =
-				(i & 8   ? 1 << 0  : 0) |
-				(i & 4   ? 1 << 8  : 0) |
-				(i & 2   ? 1 << 16 : 0) |
-				(i & 1   ? 1 << 24 : 0);
-
-
-	palette_setpixel(0);
-	if (bytes_per_char_h == 1) {
-		palette_write (0);
-		palette_write (0x00ffffff);
-		for (i = 2; i < 256; i++)
-			palette_write (0);
-		white = 1;
-	} else {
-		for (i = 0; i < 256; i++)
-			palette_write (i < 16 ? palette_4[i] : 0);
-		white = 7;
-	}
-
-	if (nr_pages * page_size < 4096*1024) error("<4M of mem\n");
-}
-#endif
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-rpc/vmalloc.h b/include/asm-arm/arch-rpc/vmalloc.h
deleted file mode 100644
index 077046bb..0000000
--- a/include/asm-arm/arch-rpc/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/vmalloc.h
- *
- *  Copyright (C) 1997 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x1c000000)
diff --git a/include/asm-arm/arch-s3c2400/map.h b/include/asm-arm/arch-s3c2400/map.h
deleted file mode 100644
index 1184d90..0000000
--- a/include/asm-arm/arch-s3c2400/map.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2400/map.h
- *
- * Copyright 2003,2007  Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Copyright 2003, Lucas Correia Villa Real
- *
- * S3C2400 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C2400_PA_MEMCTRL	(0x14000000)
-#define S3C2400_PA_USBHOST	(0x14200000)
-#define S3C2400_PA_IRQ		(0x14400000)
-#define S3C2400_PA_DMA		(0x14600000)
-#define S3C2400_PA_CLKPWR	(0x14800000)
-#define S3C2400_PA_LCD		(0x14A00000)
-#define S3C2400_PA_UART		(0x15000000)
-#define S3C2400_PA_TIMER	(0x15100000)
-#define S3C2400_PA_USBDEV	(0x15200140)
-#define S3C2400_PA_WATCHDOG	(0x15300000)
-#define S3C2400_PA_IIC		(0x15400000)
-#define S3C2400_PA_IIS		(0x15508000)
-#define S3C2400_PA_GPIO		(0x15600000)
-#define S3C2400_PA_RTC		(0x15700040)
-#define S3C2400_PA_ADC		(0x15800000)
-#define S3C2400_PA_SPI		(0x15900000)
-
-#define S3C2400_PA_MMC		(0x15A00000)
-#define S3C2400_SZ_MMC		SZ_1M
-
-/* physical addresses of all the chip-select areas */
-
-#define S3C2400_CS0	(0x00000000)
-#define S3C2400_CS1	(0x02000000)
-#define S3C2400_CS2	(0x04000000)
-#define S3C2400_CS3	(0x06000000)
-#define S3C2400_CS4	(0x08000000)
-#define S3C2400_CS5	(0x0A000000)
-#define S3C2400_CS6	(0x0C000000)
-#define S3C2400_CS7	(0x0E000000)
-
-#define S3C2400_SDRAM_PA    (S3C2400_CS6)
-
-/* Use a single interface for common resources between S3C24XX cpus */
-
-#define S3C24XX_PA_IRQ		S3C2400_PA_IRQ
-#define S3C24XX_PA_MEMCTRL	S3C2400_PA_MEMCTRL
-#define S3C24XX_PA_USBHOST	S3C2400_PA_USBHOST
-#define S3C24XX_PA_DMA		S3C2400_PA_DMA
-#define S3C24XX_PA_CLKPWR	S3C2400_PA_CLKPWR
-#define S3C24XX_PA_LCD		S3C2400_PA_LCD
-#define S3C24XX_PA_UART		S3C2400_PA_UART
-#define S3C24XX_PA_TIMER	S3C2400_PA_TIMER
-#define S3C24XX_PA_USBDEV	S3C2400_PA_USBDEV
-#define S3C24XX_PA_WATCHDOG	S3C2400_PA_WATCHDOG
-#define S3C24XX_PA_IIC		S3C2400_PA_IIC
-#define S3C24XX_PA_IIS		S3C2400_PA_IIS
-#define S3C24XX_PA_GPIO		S3C2400_PA_GPIO
-#define S3C24XX_PA_RTC		S3C2400_PA_RTC
-#define S3C24XX_PA_ADC		S3C2400_PA_ADC
-#define S3C24XX_PA_SPI		S3C2400_PA_SPI
diff --git a/include/asm-arm/arch-s3c2400/memory.h b/include/asm-arm/arch-s3c2400/memory.h
deleted file mode 100644
index fb0381d..0000000
--- a/include/asm-arm/arch-s3c2400/memory.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2400/memory.h
- *  from linux/include/asm-arm/arch-rpc/memory.h
- *
- *  Copyright 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- *  Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET	UL(0x0C000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-s3c2410/anubis-cpld.h b/include/asm-arm/arch-s3c2410/anubis-cpld.h
deleted file mode 100644
index 168b93f..0000000
--- a/include/asm-arm/arch-s3c2410/anubis-cpld.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/anubis-cpld.h
- *
- * Copyright (c) 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ANUBISCPLD_H
-#define __ASM_ARCH_ANUBISCPLD_H
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define ANUBIS_CTRL1_NANDSEL		(0x3)
-
-/* IDREG - revision */
-
-#define ANUBIS_IDREG_REVMASK		(0x7)
-
-#endif /* __ASM_ARCH_ANUBISCPLD_H */
diff --git a/include/asm-arm/arch-s3c2410/anubis-irq.h b/include/asm-arm/arch-s3c2410/anubis-irq.h
deleted file mode 100644
index cd77a70..0000000
--- a/include/asm-arm/arch-s3c2410/anubis-irq.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/anubis-irq.h
- *
- * Copyright (c) 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- *  ANUBIS - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ANUBISIRQ_H
-#define __ASM_ARCH_ANUBISIRQ_H
-
-#define IRQ_IDE0       IRQ_EINT2
-#define IRQ_IDE1       IRQ_EINT3
-#define IRQ_ASIX       IRQ_EINT1
-
-#endif /* __ASM_ARCH_ANUBISIRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/anubis-map.h b/include/asm-arm/arch-s3c2410/anubis-map.h
deleted file mode 100644
index 830d114..0000000
--- a/include/asm-arm/arch-s3c2410/anubis-map.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/anubis-map.h
- *
- * Copyright (c) 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-#ifndef __ASM_ARCH_ANUBISMAP_H
-#define __ASM_ARCH_ANUBISMAP_H
-
-/* start peripherals off after the S3C2410 */
-
-#define ANUBIS_IOADDR(x)	(S3C2410_ADDR((x) + 0x01800000))
-
-#define ANUBIS_PA_CPLD		(S3C2410_CS1 | (1<<26))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define ANUBIS_VA_CTRL1	    ANUBIS_IOADDR(0x00000000)	 /* 0x01800000 */
-#define ANUBIS_PA_CTRL1	    (ANUBIS_PA_CPLD)
-
-#define ANUBIS_VA_IDREG	    ANUBIS_IOADDR(0x00300000)	 /* 0x01B00000 */
-#define ANUBIS_PA_IDREG	    (ANUBIS_PA_CPLD + (3<<23))
-
-#define ANUBIS_IDEPRI	    ANUBIS_IOADDR(0x01000000)
-#define ANUBIS_IDEPRIAUX    ANUBIS_IOADDR(0x01100000)
-#define ANUBIS_IDESEC	    ANUBIS_IOADDR(0x01200000)
-#define ANUBIS_IDESECAUX    ANUBIS_IOADDR(0x01300000)
-
-#endif /* __ASM_ARCH_ANUBISMAP_H */
diff --git a/include/asm-arm/arch-s3c2410/audio.h b/include/asm-arm/arch-s3c2410/audio.h
deleted file mode 100644
index 0a6977f..0000000
--- a/include/asm-arm/arch-s3c2410/audio.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/audio.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - Audio platfrom_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_AUDIO_H
-#define __ASM_ARCH_AUDIO_H __FILE__
-
-/* struct s3c24xx_iis_ops
- *
- * called from the s3c24xx audio core to deal with the architecture
- * or the codec's setup and control.
- *
- * the pointer to itself is passed through in case the caller wants to
- * embed this in an larger structure for easy reference to it's context.
-*/
-
-struct s3c24xx_iis_ops {
-	struct module *owner;
-
-	int	(*startup)(struct s3c24xx_iis_ops *me);
-	void	(*shutdown)(struct s3c24xx_iis_ops *me);
-	int	(*suspend)(struct s3c24xx_iis_ops *me);
-	int	(*resume)(struct s3c24xx_iis_ops *me);
-
-	int	(*open)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
-	int	(*close)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
-	int	(*prepare)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm, struct snd_pcm_runtime *rt);
-};
-
-struct s3c24xx_platdata_iis {
-	const char		*codec_clk;
-	struct s3c24xx_iis_ops	*ops;
-	int			(*match_dev)(struct device *dev);
-};
-
-#endif /* __ASM_ARCH_AUDIO_H */
diff --git a/include/asm-arm/arch-s3c2410/bast-cpld.h b/include/asm-arm/arch-s3c2410/bast-cpld.h
deleted file mode 100644
index 034d2c5..0000000
--- a/include/asm-arm/arch-s3c2410/bast-cpld.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/bast-cpld.h
- *
- * Copyright (c) 2003,2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * BAST - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTCPLD_H
-#define __ASM_ARCH_BASTCPLD_H
-
-/* CTRL1 - Audio LR routing */
-
-#define BAST_CPLD_CTRL1_LRCOFF	    (0x00)
-#define BAST_CPLD_CTRL1_LRCADC	    (0x01)
-#define BAST_CPLD_CTRL1_LRCDAC	    (0x02)
-#define BAST_CPLD_CTRL1_LRCARM	    (0x03)
-#define BAST_CPLD_CTRL1_LRMASK	    (0x03)
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define BAST_CPLD_CTRL2_WNAND       (0x04)
-#define BAST_CPLD_CTLR2_IDERST      (0x08)
-
-/* CTRL3 - rom write control, CPLD identity */
-
-#define BAST_CPLD_CTRL3_IDMASK      (0x0e)
-#define BAST_CPLD_CTRL3_ROMWEN      (0x01)
-
-/* CTRL4 - 8bit LCD interface control/status */
-
-#define BAST_CPLD_CTRL4_LLAT	    (0x01)
-#define BAST_CPLD_CTRL4_LCDRW	    (0x02)
-#define BAST_CPLD_CTRL4_LCDCMD	    (0x04)
-#define BAST_CPLD_CTRL4_LCDE2	    (0x01)
-
-/* CTRL5 - DMA routing */
-
-#define BAST_CPLD_DMA0_PRIIDE      (0<<0)
-#define BAST_CPLD_DMA0_SECIDE      (1<<0)
-#define BAST_CPLD_DMA0_ISA15       (2<<0)
-#define BAST_CPLD_DMA0_ISA36       (3<<0)
-
-#define BAST_CPLD_DMA1_PRIIDE      (0<<2)
-#define BAST_CPLD_DMA1_SECIDE      (1<<2)
-#define BAST_CPLD_DMA1_ISA15       (2<<2)
-#define BAST_CPLD_DMA1_ISA36       (3<<2)
-
-#endif /* __ASM_ARCH_BASTCPLD_H */
diff --git a/include/asm-arm/arch-s3c2410/bast-irq.h b/include/asm-arm/arch-s3c2410/bast-irq.h
deleted file mode 100644
index 726c046..0000000
--- a/include/asm-arm/arch-s3c2410/bast-irq.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/bast-irq.h
- *
- * Copyright (c) 2003,2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Machine BAST - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTIRQ_H
-#define __ASM_ARCH_BASTIRQ_H
-
-/* irq numbers to onboard peripherals */
-
-#define IRQ_USBOC      IRQ_EINT18
-#define IRQ_IDE0       IRQ_EINT16
-#define IRQ_IDE1       IRQ_EINT17
-#define IRQ_PCSERIAL1  IRQ_EINT15
-#define IRQ_PCSERIAL2  IRQ_EINT14
-#define IRQ_PCPARALLEL IRQ_EINT13
-#define IRQ_ASIX       IRQ_EINT11
-#define IRQ_DM9000     IRQ_EINT10
-#define IRQ_ISA	       IRQ_EINT9
-#define IRQ_SMALERT    IRQ_EINT8
-
-#endif /* __ASM_ARCH_BASTIRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/bast-map.h b/include/asm-arm/arch-s3c2410/bast-map.h
deleted file mode 100644
index 86ac1c1..0000000
--- a/include/asm-arm/arch-s3c2410/bast-map.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/bast-map.h
- *
- * Copyright (c) 2003,2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Machine BAST - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x13000000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space. We also have the board's CPLD to find register space
- * for.
- */
-
-#ifndef __ASM_ARCH_BASTMAP_H
-#define __ASM_ARCH_BASTMAP_H
-
-#define BAST_IOADDR(x)	   (S3C2410_ADDR((x) + 0x01300000))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define BAST_VA_CTRL1	    BAST_IOADDR(0x00000000)	 /* 0x01300000 */
-#define BAST_PA_CTRL1	    (S3C2410_CS5 | 0x7800000)
-
-#define BAST_VA_CTRL2	    BAST_IOADDR(0x00100000)	 /* 0x01400000 */
-#define BAST_PA_CTRL2	    (S3C2410_CS1 | 0x6000000)
-
-#define BAST_VA_CTRL3	    BAST_IOADDR(0x00200000)	 /* 0x01500000 */
-#define BAST_PA_CTRL3	    (S3C2410_CS1 | 0x6800000)
-
-#define BAST_VA_CTRL4	    BAST_IOADDR(0x00300000)	 /* 0x01600000 */
-#define BAST_PA_CTRL4	    (S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define BAST_PA_PC104_IRQREQ  (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
-#define BAST_VA_PC104_IRQREQ  BAST_IOADDR(0x00400000)
-
-#define BAST_PA_PC104_IRQRAW  (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
-#define BAST_VA_PC104_IRQRAW  BAST_IOADDR(0x00500000)
-
-#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
-#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000)
-
-#define BAST_PA_LCD_RCMD1     (0x8800000)
-#define BAST_VA_LCD_RCMD1     BAST_IOADDR(0x00700000)
-
-#define BAST_PA_LCD_WCMD1     (0x8000000)
-#define BAST_VA_LCD_WCMD1     BAST_IOADDR(0x00800000)
-
-#define BAST_PA_LCD_RDATA1    (0x9800000)
-#define BAST_VA_LCD_RDATA1    BAST_IOADDR(0x00900000)
-
-#define BAST_PA_LCD_WDATA1    (0x9000000)
-#define BAST_VA_LCD_WDATA1    BAST_IOADDR(0x00A00000)
-
-#define BAST_PA_LCD_RCMD2     (0xA800000)
-#define BAST_VA_LCD_RCMD2     BAST_IOADDR(0x00B00000)
-
-#define BAST_PA_LCD_WCMD2     (0xA000000)
-#define BAST_VA_LCD_WCMD2     BAST_IOADDR(0x00C00000)
-
-#define BAST_PA_LCD_RDATA2    (0xB800000)
-#define BAST_VA_LCD_RDATA2    BAST_IOADDR(0x00D00000)
-
-#define BAST_PA_LCD_WDATA2    (0xB000000)
-#define BAST_VA_LCD_WDATA2    BAST_IOADDR(0x00E00000)
-
-
-/* 0xE0000000 contains the IO space that is split by speed and
- * wether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000  8bit,  slow
- * 0x04000000 to 0x08000000  16bit, slow
- * 0x08000000 to 0x0C000000  16bit, net
- * 0x0C000000 to 0x10000000  16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x00000000 to 0x01000000 16MB ISA IO space
- * 0x01000000 to 0x02000000 16MB ISA memory space
- * 0x02000000 to 0x02100000 1MB  IDE primary channel
- * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB  IDE secondary channel
- * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
- * 0x02400000 to 0x02500000 1MB  ASIX ethernet controller
- * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controller
- * 0x02600000 to 0x02700000 1MB  PC SuperIO controller
- *
- * the phyiscal layout of the zones are:
- *  nGCS2 - 8bit, slow
- *  nGCS3 - 16bit, slow
- *  nGCS4 - 16bit, net
- *  nGCS5 - 16bit, fast
- */
-
-#define BAST_VA_MULTISPACE (0xE0000000)
-
-#define BAST_VA_ISAIO	   (BAST_VA_MULTISPACE + 0x00000000)
-#define BAST_VA_ISAMEM	   (BAST_VA_MULTISPACE + 0x01000000)
-#define BAST_VA_IDEPRI	   (BAST_VA_MULTISPACE + 0x02000000)
-#define BAST_VA_IDEPRIAUX  (BAST_VA_MULTISPACE + 0x02100000)
-#define BAST_VA_IDESEC	   (BAST_VA_MULTISPACE + 0x02200000)
-#define BAST_VA_IDESECAUX  (BAST_VA_MULTISPACE + 0x02300000)
-#define BAST_VA_ASIXNET	   (BAST_VA_MULTISPACE + 0x02400000)
-#define BAST_VA_DM9000	   (BAST_VA_MULTISPACE + 0x02500000)
-#define BAST_VA_SUPERIO	   (BAST_VA_MULTISPACE + 0x02600000)
-
-#define BAST_VA_MULTISPACE (0xE0000000)
-
-#define BAST_VAM_CS2 (0x00000000)
-#define BAST_VAM_CS3 (0x04000000)
-#define BAST_VAM_CS4 (0x08000000)
-#define BAST_VAM_CS5 (0x0C000000)
-
-/* physical offset addresses for the peripherals */
-
-#define BAST_PA_ISAIO	  (0x00000000)
-#define BAST_PA_ASIXNET	  (0x01000000)
-#define BAST_PA_SUPERIO	  (0x01800000)
-#define BAST_PA_IDEPRI	  (0x02000000)
-#define BAST_PA_IDEPRIAUX (0x02800000)
-#define BAST_PA_IDESEC	  (0x03000000)
-#define BAST_PA_IDESECAUX (0x03800000)
-#define BAST_PA_ISAMEM	  (0x04000000)
-#define BAST_PA_DM9000	  (0x05000000)
-
-/* some configurations for the peripherals */
-
-#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2)
-/*  */
-
-#define BAST_ASIXNET_CS  BAST_VAM_CS5
-#define BAST_IDE_CS	 BAST_VAM_CS5
-#define BAST_DM9000_CS	 BAST_VAM_CS4
-
-#endif /* __ASM_ARCH_BASTMAP_H */
diff --git a/include/asm-arm/arch-s3c2410/bast-pmu.h b/include/asm-arm/arch-s3c2410/bast-pmu.h
deleted file mode 100644
index 37a11fe5..0000000
--- a/include/asm-arm/arch-s3c2410/bast-pmu.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/bast-pmu.h
- *
- * Copyright (c) 2003,2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	Vincent Sanders <vince@simtec.co.uk>
- *
- * Machine BAST - Power Management chip
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTPMU_H
-#define __ASM_ARCH_BASTPMU_H "08_OCT_2004"
-
-#define BASTPMU_REG_IDENT	(0x00)
-#define BASTPMU_REG_VERSION	(0x01)
-#define BASTPMU_REG_DDCCTRL	(0x02)
-#define BASTPMU_REG_POWER	(0x03)
-#define BASTPMU_REG_RESET	(0x04)
-#define BASTPMU_REG_GWO		(0x05)
-#define BASTPMU_REG_WOL		(0x06)
-#define BASTPMU_REG_WOR		(0x07)
-#define BASTPMU_REG_UID		(0x09)
-
-#define BASTPMU_EEPROM		(0xC0)
-
-#define BASTPMU_EEP_UID		(BASTPMU_EEPROM + 0)
-#define BASTPMU_EEP_WOL		(BASTPMU_EEPROM + 8)
-#define BASTPMU_EEP_WOR		(BASTPMU_EEPROM + 9)
-
-#define BASTPMU_IDENT_0		0x53
-#define BASTPMU_IDENT_1		0x42
-#define BASTPMU_IDENT_2		0x50
-#define BASTPMU_IDENT_3		0x4d
-
-#define BASTPMU_RESET_GUARD	(0x55)
-
-#endif /* __ASM_ARCH_BASTPMU_H */
diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S
deleted file mode 100644
index 89076c3..0000000
--- a/include/asm-arm/arch-s3c2410/debug-macro.S
+++ /dev/null
@@ -1,102 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Copyright (C) 2005 Simtec Electronics
- *
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/map.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/plat-s3c/regs-serial.h>
-
-#define S3C2410_UART1_OFF (0x4000)
-#define SHIFT_2440TXF (14-9)
-
-	.macro addruart, rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C24XX_PA_UART
-		ldrne	\rx, = S3C24XX_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-	.macro fifo_full_s3c24xx rd, rx
-		@ check for arm920 vs arm926. currently assume all arm926
-		@ devices have an 64 byte FIFO identical to the s3c2440
-		mrc	p15, 0, \rd, c0, c0
-		and	\rd, \rd, #0xff0
-		teq	\rd, #0x260
-		beq	1004f
-		mrc	p15, 0, \rd, c1, c0
-		tst	\rd, #1
-		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
-		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
-		bic	\rd, \rd, #0xff000
-		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
-		and	\rd, \rd, #0x00ff0000
-		teq	\rd, #0x00440000		@ is it 2440?
-1004:
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		moveq	\rd, \rd, lsr #SHIFT_2440TXF
-		tst	\rd, #S3C2410_UFSTAT_TXFULL
-	.endm
-
-	.macro  fifo_full_s3c2410 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		tst	\rd, #S3C2410_UFSTAT_TXFULL
-	.endm
-
-/* fifo level reading */
-
-	.macro fifo_level_s3c24xx rd, rx
-		@ check for arm920 vs arm926. currently assume all arm926
-		@ devices have an 64 byte FIFO identical to the s3c2440
-		mrc	p15, 0, \rd, c0, c0
-		and	\rd, \rd, #0xff0
-		teq	\rd, #0x260
-		beq	10000f
-		mrc	p15, 0, \rd, c1, c0
-		tst	\rd, #1
-		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
-		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
-		bic	\rd, \rd, #0xff000
-		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
-		and	\rd, \rd, #0x00ff0000
-		teq	\rd, #0x00440000		@ is it 2440?
-
-10000:
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		andne	\rd, \rd, #S3C2410_UFSTAT_TXMASK
-		andeq	\rd, \rd, #S3C2440_UFSTAT_TXMASK
-	.endm
-
-	.macro fifo_level_s3c2410 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
-	.endm
-
-/* Select the correct implementation depending on the configuration. The
- * S3C2440 will get selected by default, as these are the most widely
- * used variants of these
-*/
-
-#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY)
-#define fifo_full  fifo_full_s3c2410
-#define fifo_level fifo_level_s3c2410
-#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY)
-#define fifo_full  fifo_full_s3c24xx
-#define fifo_level fifo_level_s3c24xx
-#endif
-
-/* include the reset of the code which will do the work */
-
-#include <asm/plat-s3c/debug-macro.S>
diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h
deleted file mode 100644
index 86eaa0c..0000000
--- a/include/asm-arm/arch-s3c2410/dma.h
+++ /dev/null
@@ -1,453 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/dma.h
- *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C241XX DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H __FILE__
-
-#include <linux/sysdev.h>
-#include <asm/arch/hardware.h>
-
-/*
- * This is the maximum DMA address(physical address) that can be DMAd to.
- *
- */
-#define MAX_DMA_ADDRESS		0x40000000
-#define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
-
-/* We use `virtual` dma channels to hide the fact we have only a limited
- * number of DMA channels, and not of all of them (dependant on the device)
- * can be attached to any DMA source. We therefore let the DMA core handle
- * the allocation of hardware channels to clients.
-*/
-
-enum dma_ch {
-	DMACH_XD0,
-	DMACH_XD1,
-	DMACH_SDI,
-	DMACH_SPI0,
-	DMACH_SPI1,
-	DMACH_UART0,
-	DMACH_UART1,
-	DMACH_UART2,
-	DMACH_TIMER,
-	DMACH_I2S_IN,
-	DMACH_I2S_OUT,
-	DMACH_PCM_IN,
-	DMACH_PCM_OUT,
-	DMACH_MIC_IN,
-	DMACH_USB_EP1,
-	DMACH_USB_EP2,
-	DMACH_USB_EP3,
-	DMACH_USB_EP4,
-	DMACH_UART0_SRC2,	/* s3c2412 second uart sources */
-	DMACH_UART1_SRC2,
-	DMACH_UART2_SRC2,
-	DMACH_UART3,		/* s3c2443 has extra uart */
-	DMACH_UART3_SRC2,
-	DMACH_MAX,		/* the end entry */
-};
-
-#define DMACH_LOW_LEVEL	(1<<28)	/* use this to specifiy hardware ch no */
-
-/* we have 4 dma channels */
-#ifndef CONFIG_CPU_S3C2443
-#define S3C2410_DMA_CHANNELS		(4)
-#else
-#define S3C2410_DMA_CHANNELS		(6)
-#endif
-
-/* types */
-
-enum s3c2410_dma_state {
-	S3C2410_DMA_IDLE,
-	S3C2410_DMA_RUNNING,
-	S3C2410_DMA_PAUSED
-};
-
-
-/* enum s3c2410_dma_loadst
- *
- * This represents the state of the DMA engine, wrt to the loaded / running
- * transfers. Since we don't have any way of knowing exactly the state of
- * the DMA transfers, we need to know the state to make decisions on wether
- * we can
- *
- * S3C2410_DMA_NONE
- *
- * There are no buffers loaded (the channel should be inactive)
- *
- * S3C2410_DMA_1LOADED
- *
- * There is one buffer loaded, however it has not been confirmed to be
- * loaded by the DMA engine. This may be because the channel is not
- * yet running, or the DMA driver decided that it was too costly to
- * sit and wait for it to happen.
- *
- * S3C2410_DMA_1RUNNING
- *
- * The buffer has been confirmed running, and not finisged
- *
- * S3C2410_DMA_1LOADED_1RUNNING
- *
- * There is a buffer waiting to be loaded by the DMA engine, and one
- * currently running.
-*/
-
-enum s3c2410_dma_loadst {
-	S3C2410_DMALOAD_NONE,
-	S3C2410_DMALOAD_1LOADED,
-	S3C2410_DMALOAD_1RUNNING,
-	S3C2410_DMALOAD_1LOADED_1RUNNING,
-};
-
-enum s3c2410_dma_buffresult {
-	S3C2410_RES_OK,
-	S3C2410_RES_ERR,
-	S3C2410_RES_ABORT
-};
-
-enum s3c2410_dmasrc {
-	S3C2410_DMASRC_HW,		/* source is memory */
-	S3C2410_DMASRC_MEM		/* source is hardware */
-};
-
-/* enum s3c2410_chan_op
- *
- * operation codes passed to the DMA code by the user, and also used
- * to inform the current channel owner of any changes to the system state
-*/
-
-enum s3c2410_chan_op {
-	S3C2410_DMAOP_START,
-	S3C2410_DMAOP_STOP,
-	S3C2410_DMAOP_PAUSE,
-	S3C2410_DMAOP_RESUME,
-	S3C2410_DMAOP_FLUSH,
-	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
-	S3C2410_DMAOP_STARTED,		/* indicate channel started */
-};
-
-/* flags */
-
-#define S3C2410_DMAF_SLOW         (1<<0)   /* slow, so don't worry about
-					    * waiting for reloads */
-#define S3C2410_DMAF_AUTOSTART    (1<<1)   /* auto-start if buffer queued */
-
-/* dma buffer */
-
-struct s3c2410_dma_client {
-	char                *name;
-};
-
-/* s3c2410_dma_buf_s
- *
- * internally used buffer structure to describe a queued or running
- * buffer.
-*/
-
-struct s3c2410_dma_buf;
-struct s3c2410_dma_buf {
-	struct s3c2410_dma_buf	*next;
-	int			 magic;		/* magic */
-	int			 size;		/* buffer size in bytes */
-	dma_addr_t		 data;		/* start of DMA data */
-	dma_addr_t		 ptr;		/* where the DMA got to [1] */
-	void			*id;		/* client's id */
-};
-
-/* [1] is this updated for both recv/send modes? */
-
-struct s3c2410_dma_chan;
-
-/* s3c2410_dma_cbfn_t
- *
- * buffer callback routine type
-*/
-
-typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
-				   void *buf, int size,
-				   enum s3c2410_dma_buffresult result);
-
-typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
-				   enum s3c2410_chan_op );
-
-struct s3c2410_dma_stats {
-	unsigned long		loads;
-	unsigned long		timeout_longest;
-	unsigned long		timeout_shortest;
-	unsigned long		timeout_avg;
-	unsigned long		timeout_failed;
-};
-
-struct s3c2410_dma_map;
-
-/* struct s3c2410_dma_chan
- *
- * full state information for each DMA channel
-*/
-
-struct s3c2410_dma_chan {
-	/* channel state flags and information */
-	unsigned char		 number;      /* number of this dma channel */
-	unsigned char		 in_use;      /* channel allocated */
-	unsigned char		 irq_claimed; /* irq claimed for channel */
-	unsigned char		 irq_enabled; /* irq enabled for channel */
-	unsigned char		 xfer_unit;   /* size of an transfer */
-
-	/* channel state */
-
-	enum s3c2410_dma_state	 state;
-	enum s3c2410_dma_loadst	 load_state;
-	struct s3c2410_dma_client *client;
-
-	/* channel configuration */
-	enum s3c2410_dmasrc	 source;
-	unsigned long		 dev_addr;
-	unsigned long		 load_timeout;
-	unsigned int		 flags;		/* channel flags */
-	unsigned int		 hw_cfg;	/* last hw config */
-
-	struct s3c24xx_dma_map	*map;		/* channel hw maps */
-
-	/* channel's hardware position and configuration */
-	void __iomem		*regs;		/* channels registers */
-	void __iomem		*addr_reg;	/* data address register */
-	unsigned int		 irq;		/* channel irq */
-	unsigned long		 dcon;		/* default value of DCON */
-
-	/* driver handles */
-	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
-	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
-
-	/* stats gathering */
-	struct s3c2410_dma_stats *stats;
-	struct s3c2410_dma_stats  stats_store;
-
-	/* buffer list and information */
-	struct s3c2410_dma_buf	*curr;		/* current dma buffer */
-	struct s3c2410_dma_buf	*next;		/* next buffer to load */
-	struct s3c2410_dma_buf	*end;		/* end of queue */
-
-	/* system device */
-	struct sys_device	dev;
-};
-
-/* the currently allocated channel information */
-extern struct s3c2410_dma_chan s3c2410_chans[];
-
-/* note, we don't really use dma_device_t at the moment */
-typedef unsigned long dma_device_t;
-
-/* functions --------------------------------------------------------------- */
-
-/* s3c2410_dma_request
- *
- * request a dma channel exclusivley
-*/
-
-extern int s3c2410_dma_request(dmach_t channel,
-			       struct s3c2410_dma_client *, void *dev);
-
-
-/* s3c2410_dma_ctrl
- *
- * change the state of the dma channel
-*/
-
-extern int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op);
-
-/* s3c2410_dma_setflags
- *
- * set the channel's flags to a given state
-*/
-
-extern int s3c2410_dma_setflags(dmach_t channel,
-				unsigned int flags);
-
-/* s3c2410_dma_free
- *
- * free the dma channel (will also abort any outstanding operations)
-*/
-
-extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *);
-
-/* s3c2410_dma_enqueue
- *
- * place the given buffer onto the queue of operations for the channel.
- * The buffer must be allocated from dma coherent memory, or the Dcache/WB
- * drained before the buffer is given to the DMA system.
-*/
-
-extern int s3c2410_dma_enqueue(dmach_t channel, void *id,
-			       dma_addr_t data, int size);
-
-/* s3c2410_dma_config
- *
- * configure the dma channel
-*/
-
-extern int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon);
-
-/* s3c2410_dma_devconfig
- *
- * configure the device we're talking to
-*/
-
-extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
-				 int hwcfg, unsigned long devaddr);
-
-/* s3c2410_dma_getposition
- *
- * get the position that the dma transfer is currently at
-*/
-
-extern int s3c2410_dma_getposition(dmach_t channel,
-				   dma_addr_t *src, dma_addr_t *dest);
-
-extern int s3c2410_dma_set_opfn(dmach_t, s3c2410_dma_opfn_t rtn);
-extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn);
-
-/* DMA Register definitions */
-
-#define S3C2410_DMA_DISRC       (0x00)
-#define S3C2410_DMA_DISRCC      (0x04)
-#define S3C2410_DMA_DIDST       (0x08)
-#define S3C2410_DMA_DIDSTC      (0x0C)
-#define S3C2410_DMA_DCON        (0x10)
-#define S3C2410_DMA_DSTAT       (0x14)
-#define S3C2410_DMA_DCSRC       (0x18)
-#define S3C2410_DMA_DCDST       (0x1C)
-#define S3C2410_DMA_DMASKTRIG   (0x20)
-#define S3C2412_DMA_DMAREQSEL	(0x24)
-#define S3C2443_DMA_DMAREQSEL	(0x24)
-
-#define S3C2410_DISRCC_INC	(1<<0)
-#define S3C2410_DISRCC_APB	(1<<1)
-
-#define S3C2410_DMASKTRIG_STOP   (1<<2)
-#define S3C2410_DMASKTRIG_ON     (1<<1)
-#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
-
-#define S3C2410_DCON_DEMAND     (0<<31)
-#define S3C2410_DCON_HANDSHAKE  (1<<31)
-#define S3C2410_DCON_SYNC_PCLK  (0<<30)
-#define S3C2410_DCON_SYNC_HCLK  (1<<30)
-
-#define S3C2410_DCON_INTREQ     (1<<29)
-
-#define S3C2410_DCON_CH0_XDREQ0	(0<<24)
-#define S3C2410_DCON_CH0_UART0	(1<<24)
-#define S3C2410_DCON_CH0_SDI	(2<<24)
-#define S3C2410_DCON_CH0_TIMER	(3<<24)
-#define S3C2410_DCON_CH0_USBEP1	(4<<24)
-
-#define S3C2410_DCON_CH1_XDREQ1	(0<<24)
-#define S3C2410_DCON_CH1_UART1	(1<<24)
-#define S3C2410_DCON_CH1_I2SSDI	(2<<24)
-#define S3C2410_DCON_CH1_SPI	(3<<24)
-#define S3C2410_DCON_CH1_USBEP2	(4<<24)
-
-#define S3C2410_DCON_CH2_I2SSDO	(0<<24)
-#define S3C2410_DCON_CH2_I2SSDI	(1<<24)
-#define S3C2410_DCON_CH2_SDI	(2<<24)
-#define S3C2410_DCON_CH2_TIMER	(3<<24)
-#define S3C2410_DCON_CH2_USBEP3	(4<<24)
-
-#define S3C2410_DCON_CH3_UART2	(0<<24)
-#define S3C2410_DCON_CH3_SDI	(1<<24)
-#define S3C2410_DCON_CH3_SPI	(2<<24)
-#define S3C2410_DCON_CH3_TIMER	(3<<24)
-#define S3C2410_DCON_CH3_USBEP4	(4<<24)
-
-#define S3C2410_DCON_SRCSHIFT   (24)
-#define S3C2410_DCON_SRCMASK	(7<<24)
-
-#define S3C2410_DCON_BYTE       (0<<20)
-#define S3C2410_DCON_HALFWORD   (1<<20)
-#define S3C2410_DCON_WORD       (2<<20)
-
-#define S3C2410_DCON_AUTORELOAD (0<<22)
-#define S3C2410_DCON_NORELOAD   (1<<22)
-#define S3C2410_DCON_HWTRIG     (1<<23)
-
-#ifdef CONFIG_CPU_S3C2440
-#define S3C2440_DIDSTC_CHKINT	(1<<2)
-
-#define S3C2440_DCON_CH0_I2SSDO	(5<<24)
-#define S3C2440_DCON_CH0_PCMIN	(6<<24)
-
-#define S3C2440_DCON_CH1_PCMOUT	(5<<24)
-#define S3C2440_DCON_CH1_SDI	(6<<24)
-
-#define S3C2440_DCON_CH2_PCMIN	(5<<24)
-#define S3C2440_DCON_CH2_MICIN	(6<<24)
-
-#define S3C2440_DCON_CH3_MICIN	(5<<24)
-#define S3C2440_DCON_CH3_PCMOUT	(6<<24)
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-
-#define S3C2412_DMAREQSEL_SRC(x)	((x)<<1)
-
-#define S3C2412_DMAREQSEL_HW		(1)
-
-#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
-#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
-#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
-#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
-#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
-#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
-#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
-#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
-#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
-#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
-#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
-#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
-#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
-#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
-#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
-#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
-#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
-#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
-#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
-#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
-
-#endif
-
-#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
-
-#define S3C2443_DMAREQSEL_HW		(1)
-
-#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
-#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
-#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
-#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
-#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
-#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
-#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
-#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
-#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
-#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
-#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
-#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
-#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
-#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
-#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
-#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
-#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
-#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
-#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
-#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
-#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-s3c2410/entry-macro.S b/include/asm-arm/arch-s3c2410/entry-macro.S
deleted file mode 100644
index f70d051..0000000
--- a/include/asm-arm/arch-s3c2410/entry-macro.S
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * include/asm-arm/arch-s3c2410/entry-macro.S
- *
- * Low-level IRQ helper macros for S3C2410-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-/* We have a problem that the INTOFFSET register does not always
- * show one interrupt. Occasionally we get two interrupts through
- * the prioritiser, and this causes the INTOFFSET register to show
- * what looks like the logical-or of the two interrupt numbers.
- *
- * Thanks to Klaus, Shannon, et al for helping to debug this problem
-*/
-
-#define INTPND		(0x10)
-#define INTOFFSET	(0x14)
-
-#include <asm/arch/hardware.h>
-#include <asm/irq.h>
-
-	.macro  get_irqnr_preamble, base, tmp
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		mov	\base, #S3C24XX_VA_IRQ
-
-		@@ try the interrupt offset register, since it is there
-
-		ldr	\irqstat, [ \base, #INTPND ]
-		teq	\irqstat, #0
-		beq	1002f
-		ldr	\irqnr, [ \base, #INTOFFSET ]
-		mov	\tmp, #1
-		tst	\irqstat, \tmp, lsl \irqnr
-		bne	1001f
-
-		@@ the number specified is not a valid irq, so try
-		@@ and work it out for ourselves
-
-		mov	\irqnr, #0		@@ start here
-
-		@@ work out which irq (if any) we got
-
-		movs	\tmp, \irqstat, lsl#16
-		addeq	\irqnr, \irqnr, #16
-		moveq	\irqstat, \irqstat, lsr#16
-		tst	\irqstat, #0xff
-		addeq	\irqnr, \irqnr, #8
-		moveq	\irqstat, \irqstat, lsr#8
-		tst	\irqstat, #0xf
-		addeq	\irqnr, \irqnr, #4
-		moveq	\irqstat, \irqstat, lsr#4
-		tst	\irqstat, #0x3
-		addeq	\irqnr, \irqnr, #2
-		moveq	\irqstat, \irqstat, lsr#2
-		tst	\irqstat, #0x1
-		addeq	\irqnr, \irqnr, #1
-
-		@@ we have the value
-1001:
-		adds	\irqnr, \irqnr, #IRQ_EINT0
-1002:
-		@@ exit here, Z flag unset if IRQ
-
-	.endm
-
-		/* currently don't need an disable_fiq macro */
-
-		.macro	disable_fiq
-		.endm
diff --git a/include/asm-arm/arch-s3c2410/fb.h b/include/asm-arm/arch-s3c2410/fb.h
deleted file mode 100644
index 5d026260..0000000
--- a/include/asm-arm/arch-s3c2410/fb.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/fb.h
- *
- * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * Inspired by pxafb.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_FB_H
-#define __ASM_ARM_FB_H
-
-#include <asm/arch/regs-lcd.h>
-
-struct s3c2410fb_hw {
-	unsigned long	lcdcon1;
-	unsigned long	lcdcon2;
-	unsigned long	lcdcon3;
-	unsigned long	lcdcon4;
-	unsigned long	lcdcon5;
-};
-
-/* LCD description */
-struct s3c2410fb_display {
-	/* LCD type */
-	unsigned type;
-
-	/* Screen size */
-	unsigned short width;
-	unsigned short height;
-
-	/* Screen info */
-	unsigned short xres;
-	unsigned short yres;
-	unsigned short bpp;
-
-	unsigned pixclock;		/* pixclock in picoseconds */
-	unsigned short left_margin;  /* value in pixels (TFT) or HCLKs (STN) */
-	unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
-	unsigned short hsync_len;    /* value in pixels (TFT) or HCLKs (STN) */
-	unsigned short upper_margin;	/* value in lines (TFT) or 0 (STN) */
-	unsigned short lower_margin;	/* value in lines (TFT) or 0 (STN) */
-	unsigned short vsync_len;	/* value in lines (TFT) or 0 (STN) */
-
-	/* lcd configuration registers */
-	unsigned long	lcdcon5;
-};
-
-struct s3c2410fb_mach_info {
-
-	struct s3c2410fb_display *displays;	/* attached diplays info */
-	unsigned num_displays;			/* number of defined displays */
-	unsigned default_display;
-
-	/* GPIOs */
-
-	unsigned long	gpcup;
-	unsigned long	gpcup_mask;
-	unsigned long	gpccon;
-	unsigned long	gpccon_mask;
-	unsigned long	gpdup;
-	unsigned long	gpdup_mask;
-	unsigned long	gpdcon;
-	unsigned long	gpdcon_mask;
-
-	/* lpc3600 control register */
-	unsigned long	lpcsel;
-};
-
-extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
-
-#endif /* __ASM_ARM_FB_H */
diff --git a/include/asm-arm/arch-s3c2410/gpio.h b/include/asm-arm/arch-s3c2410/gpio.h
deleted file mode 100644
index 18e10d2..0000000
--- a/include/asm-arm/arch-s3c2410/gpio.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/gpio.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-
-#include <asm-generic/gpio.h>
diff --git a/include/asm-arm/arch-s3c2410/h1940-latch.h b/include/asm-arm/arch-s3c2410/h1940-latch.h
deleted file mode 100644
index c3de5ab..0000000
--- a/include/asm-arm/arch-s3c2410/h1940-latch.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/h1940-latch.h
- *
- * Copyright (c) 2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- *  iPAQ H1940 series - latch definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_H1940_LATCH_H
-#define __ASM_ARCH_H1940_LATCH_H
-
-
-#ifndef __ASSEMBLY__
-#define H1940_LATCH		((void __force __iomem *)0xF8000000)
-#else
-#define H1940_LATCH		0xF8000000
-#endif
-
-#define H1940_PA_LATCH		(S3C2410_CS2)
-
-/* SD layer latch */
-
-#define H1940_LATCH_SDQ1		(1<<16)
-#define H1940_LATCH_LCD_P1		(1<<17)
-#define H1940_LATCH_LCD_P2		(1<<18)
-#define H1940_LATCH_LCD_P3		(1<<19)
-#define H1940_LATCH_MAX1698_nSHUTDOWN	(1<<20)		/* LCD backlight */
-#define H1940_LATCH_LED_RED		(1<<21)
-#define H1940_LATCH_SDQ7		(1<<22)
-#define H1940_LATCH_USB_DP		(1<<23)
-
-/* CPU layer latch */
-
-#define H1940_LATCH_UDA_POWER		(1<<24)
-#define H1940_LATCH_AUDIO_POWER		(1<<25)
-#define H1940_LATCH_SM803_ENABLE	(1<<26)
-#define H1940_LATCH_LCD_P4		(1<<27)
-#define H1940_LATCH_CPUQ5		(1<<28)		/* untraced */
-#define H1940_LATCH_BLUETOOTH_POWER	(1<<29)		/* active high */
-#define H1940_LATCH_LED_GREEN		(1<<30)
-#define H1940_LATCH_LED_FLASH		(1<<31)
-
-/* default settings */
-
-#define H1940_LATCH_DEFAULT		\
-	H1940_LATCH_LCD_P4		| \
-	H1940_LATCH_SM803_ENABLE	| \
-	H1940_LATCH_SDQ1		| \
-	H1940_LATCH_LCD_P1		| \
-	H1940_LATCH_LCD_P2		| \
-	H1940_LATCH_LCD_P3		| \
-	H1940_LATCH_MAX1698_nSHUTDOWN   | \
-	H1940_LATCH_CPUQ5
-
-/* control functions */
-
-extern void h1940_latch_control(unsigned int clear, unsigned int set);
-
-#endif /* __ASM_ARCH_H1940_LATCH_H */
diff --git a/include/asm-arm/arch-s3c2410/h1940.h b/include/asm-arm/arch-s3c2410/h1940.h
deleted file mode 100644
index 6135592..0000000
--- a/include/asm-arm/arch-s3c2410/h1940.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/h1940.h
- *
- * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
- *
- * H1940 definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_H1940_H
-#define __ASM_ARCH_H1940_H
-
-#define H1940_SUSPEND_CHECKSUM		(0x30003ff8)
-#define H1940_SUSPEND_RESUMEAT		(0x30081000)
-#define H1940_SUSPEND_CHECK		(0x30080000)
-
-extern void h1940_pm_return(void);
-
-#endif /* __ASM_ARCH_H1940_H */
diff --git a/include/asm-arm/arch-s3c2410/hardware.h b/include/asm-arm/arch-s3c2410/hardware.h
deleted file mode 100644
index 6dd10be..0000000
--- a/include/asm-arm/arch-s3c2410/hardware.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/hardware.h
- *
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - hardware
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#ifndef __ASSEMBLY__
-
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-/* s3c2410_gpio_cfgpin
- *
- * set the configuration of the given pin to the value passed.
- *
- * eg:
- *    s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
- *    s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
-*/
-
-extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- *	< 0 = no interrupt for this pin
- *	>=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irq2pin
- *
- * turn the given irq number into the corresponding GPIO number
- *
- * returns:
- *	< 0 = no pin
- *	>=0 = gpio pin number
-*/
-
-extern int s3c2410_gpio_irq2pin(unsigned int irq);
-
-#ifdef CONFIG_CPU_S3C2400
-
-extern int s3c2400_gpio_getirq(unsigned int pin);
-
-#endif /* CONFIG_CPU_S3C2400 */
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- *      1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- *          width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
-				  unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- *      0 => enable the pull-up
- *
- * eg;
- *
- *   s3c2410_gpio_pullup(S3C2410_GPB0, 0);
- *   s3c2410_gpio_pullup(S3C2410_GPE8, 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-/* s3c2410_gpio_getpull
- *
- * Read the state of the pull-up on a given pin
- *
- * return:
- *	< 0 => error code
- *	  0 => enabled
- *	  1 => disabled
-*/
-
-extern int s3c2410_gpio_getpull(unsigned int pin);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
-extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
-
-#ifdef CONFIG_CPU_S3C2440
-
-extern int s3c2440_set_dsc(unsigned int pin, unsigned int value);
-
-#endif /* CONFIG_CPU_S3C2440 */
-
-#ifdef CONFIG_CPU_S3C2412
-
-extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
-
-#endif /* CONFIG_CPU_S3C2412 */
-
-#endif /* __ASSEMBLY__ */
-
-#include <asm/sizes.h>
-#include <asm/arch/map.h>
-
-/* machine specific hardware definitions should go after this */
-
-/* currently here until moved into config (todo) */
-#define CONFIG_NO_MULTIWORD_IO
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-s3c2410/idle.h b/include/asm-arm/arch-s3c2410/idle.h
deleted file mode 100644
index eed4506..0000000
--- a/include/asm-arm/arch-s3c2410/idle.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/idle.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 CPU Idle controls
-*/
-
-#ifndef __ASM_ARCH_IDLE_H
-#define __ASM_ARCH_IDLE_H __FILE__
-
-/* This allows the over-ride of the default idle code, in case there
- * is any other things to be done over idle (like DVS)
-*/
-
-extern void (*s3c24xx_idle)(void);
-
-extern void s3c24xx_default_idle(void);
-
-#endif /* __ASM_ARCH_IDLE_H */
diff --git a/include/asm-arm/arch-s3c2410/io.h b/include/asm-arm/arch-s3c2410/io.h
deleted file mode 100644
index 3756c99..0000000
--- a/include/asm-arm/arch-s3c2410/io.h
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * linux/include/asm-arm/arch-s3c2410/io.h
- *  from linux/include/asm-arm/arch-rpc/io.h
- *
- * Copyright (C) 1997 Russell King
- *	     (C) 2003 Simtec Electronics
-*/
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses.  PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1.  ARM addresses are above A28
- * and are translated to the start of IO.  Note that all addresses are
- * not shifted left!
- */
-
-#define __PORT_PCIO(x)	((x) < (1<<28))
-
-#define PCIO_BASE	 (S3C24XX_VA_ISA_WORD)
-#define PCIO_BASE_b	 (S3C24XX_VA_ISA_BYTE)
-#define PCIO_BASE_w	 (S3C24XX_VA_ISA_WORD)
-#define PCIO_BASE_l	 (S3C24XX_VA_ISA_WORD)
-/*
- * Dynamic IO functions - let the compiler
- * optimize the expressions
- */
-
-#define DECLARE_DYN_OUT(sz,fnsuffix,instr) \
-static inline void __out##fnsuffix (unsigned int val, unsigned int port) \
-{ \
-	unsigned long temp;				      \
-	__asm__ __volatile__(				      \
-	"cmp	%2, #(1<<28)\n\t"			      \
-	"mov	%0, %2\n\t"				      \
-	"addcc	%0, %0, %3\n\t"				      \
-	"str" instr " %1, [%0, #0 ]	@ out" #fnsuffix      \
-	: "=&r" (temp)					      \
-	: "r" (val), "r" (port), "Ir" (PCIO_BASE_##fnsuffix)  \
-	: "cc");					      \
-}
-
-
-#define DECLARE_DYN_IN(sz,fnsuffix,instr)				\
-static inline unsigned sz __in##fnsuffix (unsigned int port)		\
-{									\
-	unsigned long temp, value;					\
-	__asm__ __volatile__(						\
-	"cmp	%2, #(1<<28)\n\t"					\
-	"mov	%0, %2\n\t"						\
-	"addcc	%0, %0, %3\n\t"						\
-	"ldr" instr "	%1, [%0, #0 ]	@ in" #fnsuffix		\
-	: "=&r" (temp), "=r" (value)					\
-	: "r" (port), "Ir" (PCIO_BASE_##fnsuffix)	\
-	: "cc");							\
-	return (unsigned sz)value;					\
-}
-
-static inline void __iomem *__ioaddr (unsigned long port)
-{
-	return __PORT_PCIO(port) ? (PCIO_BASE + port) : (void __iomem *)port;
-}
-
-#define DECLARE_IO(sz,fnsuffix,instr)	\
-	DECLARE_DYN_IN(sz,fnsuffix,instr) \
-	DECLARE_DYN_OUT(sz,fnsuffix,instr)
-
-DECLARE_IO(char,b,"b")
-DECLARE_IO(short,w,"h")
-DECLARE_IO(int,l,"")
-
-#undef DECLARE_IO
-#undef DECLARE_DYN_IN
-
-/*
- * Constant address IO functions
- *
- * These have to be macros for the 'J' constraint to work -
- * +/-4096 immediate operand.
- */
-#define __outbc(value,port)						\
-({									\
-	if (__PORT_PCIO((port)))					\
-		__asm__ __volatile__(					\
-		"strb	%0, [%1, %2]	@ outbc"			\
-		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port)));	\
-	else								\
-		__asm__ __volatile__(					\
-		"strb	%0, [%1, #0]	@ outbc"			\
-		: : "r" (value), "r" ((port)));				\
-})
-
-#define __inbc(port)							\
-({									\
-	unsigned char result;						\
-	if (__PORT_PCIO((port)))					\
-		__asm__ __volatile__(					\
-		"ldrb	%0, [%1, %2]	@ inbc"				\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port)));	\
-	else								\
-		__asm__ __volatile__(					\
-		"ldrb	%0, [%1, #0]	@ inbc"				\
-		: "=r" (result) : "r" ((port)));			\
-	result;								\
-})
-
-#define __outwc(value,port)						\
-({									\
-	unsigned long v = value;					\
-	if (__PORT_PCIO((port))) {					\
-		if ((port) < 256 && (port) > -256)			\
-			__asm__ __volatile__(				\
-			"strh	%0, [%1, %2]	@ outwc"		\
-			: : "r" (v), "r" (PCIO_BASE), "Jr" ((port)));	\
-		else if ((port) > 0)					\
-			__asm__ __volatile__(				\
-			"strh	%0, [%1, %2]	@ outwc"		\
-			: : "r" (v),					\
-			    "r" (PCIO_BASE + ((port) & ~0xff)),		\
-			     "Jr" (((port) & 0xff)));			\
-		else							\
-			__asm__ __volatile__(				\
-			"strh	%0, [%1, #0]	@ outwc"		\
-			: : "r" (v),					\
-			    "r" (PCIO_BASE + (port)));			\
-	} else								\
-		__asm__ __volatile__(					\
-		"strh	%0, [%1, #0]	@ outwc"			\
-		: : "r" (v), "r" ((port)));				\
-})
-
-#define __inwc(port)							\
-({									\
-	unsigned short result;						\
-	if (__PORT_PCIO((port))) {					\
-		if ((port) < 256 && (port) > -256 )			\
-			__asm__ __volatile__(				\
-			"ldrh	%0, [%1, %2]	@ inwc"			\
-			: "=r" (result)					\
-			: "r" (PCIO_BASE),				\
-			  "Jr" ((port)));				\
-		else if ((port) > 0)					\
-			__asm__ __volatile__(				\
-			"ldrh	%0, [%1, %2]	@ inwc"			\
-			: "=r" (result)					\
-			: "r" (PCIO_BASE + ((port) & ~0xff)),		\
-			  "Jr" (((port) & 0xff)));			\
-		else							\
-			__asm__ __volatile__(				\
-			"ldrh	%0, [%1, #0]	@ inwc"			\
-			: "=r" (result)					\
-			: "r" (PCIO_BASE + ((port))));			\
-	} else								\
-		__asm__ __volatile__(					\
-		"ldrh	%0, [%1, #0]	@ inwc"				\
-		: "=r" (result) : "r" ((port)));			\
-	result;								\
-})
-
-#define __outlc(value,port)						\
-({									\
-	unsigned long v = value;					\
-	if (__PORT_PCIO((port)))					\
-		__asm__ __volatile__(					\
-		"str	%0, [%1, %2]	@ outlc"			\
-		: : "r" (v), "r" (PCIO_BASE), "Jr" ((port)));	\
-	else								\
-		__asm__ __volatile__(					\
-		"str	%0, [%1, #0]	@ outlc"			\
-		: : "r" (v), "r" ((port)));		\
-})
-
-#define __inlc(port)							\
-({									\
-	unsigned long result;						\
-	if (__PORT_PCIO((port)))					\
-		__asm__ __volatile__(					\
-		"ldr	%0, [%1, %2]	@ inlc"				\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port)));	\
-	else								\
-		__asm__ __volatile__(					\
-		"ldr	%0, [%1, #0]	@ inlc"				\
-		: "=r" (result) : "r" ((port)));		\
-	result;								\
-})
-
-#define __ioaddrc(port)	((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port)))
-
-#define inb(p)		(__builtin_constant_p((p)) ? __inbc(p)	   : __inb(p))
-#define inw(p)		(__builtin_constant_p((p)) ? __inwc(p)	   : __inw(p))
-#define inl(p)		(__builtin_constant_p((p)) ? __inlc(p)	   : __inl(p))
-#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
-#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
-#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
-#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
-/* the following macro is deprecated */
-#define ioaddr(port)	__ioaddr((port))
-
-#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
-#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
-#define insl(p,d,l)	__raw_readsl(__ioaddr(p),d,l)
-
-#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
-#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
-#define outsl(p,d,l)	__raw_writesl(__ioaddr(p),d,l)
-
-/*
- * 1:1 mapping for ioremapped regions.
- */
-#define __mem_pci(x)	(x)
-
-#endif
diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h
deleted file mode 100644
index f5435d8..0000000
--- a/include/asm-arm/arch-s3c2410/irqs.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/irqs.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#ifndef __ASM_ARM_IRQ_H
-#error "Do not include this directly, instead #include <asm/irq.h>"
-#endif
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- */
-
-#define S3C2410_CPUIRQ_OFFSET	 (16)
-
-#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET)
-
-/* main cpu interrupts */
-#define IRQ_EINT0      S3C2410_IRQ(0)	    /* 16 */
-#define IRQ_EINT1      S3C2410_IRQ(1)
-#define IRQ_EINT2      S3C2410_IRQ(2)
-#define IRQ_EINT3      S3C2410_IRQ(3)
-#define IRQ_EINT4t7    S3C2410_IRQ(4)	    /* 20 */
-#define IRQ_EINT8t23   S3C2410_IRQ(5)
-#define IRQ_RESERVED6  S3C2410_IRQ(6)	    /* for s3c2410 */
-#define IRQ_CAM        S3C2410_IRQ(6)	    /* for s3c2440,s3c2443 */
-#define IRQ_BATT_FLT   S3C2410_IRQ(7)
-#define IRQ_TICK       S3C2410_IRQ(8)	    /* 24 */
-#define IRQ_WDT	       S3C2410_IRQ(9)	    /* WDT/AC97 for s3c2443 */
-#define IRQ_TIMER0     S3C2410_IRQ(10)
-#define IRQ_TIMER1     S3C2410_IRQ(11)
-#define IRQ_TIMER2     S3C2410_IRQ(12)
-#define IRQ_TIMER3     S3C2410_IRQ(13)
-#define IRQ_TIMER4     S3C2410_IRQ(14)
-#define IRQ_UART2      S3C2410_IRQ(15)
-#define IRQ_LCD	       S3C2410_IRQ(16)	    /* 32 */
-#define IRQ_DMA0       S3C2410_IRQ(17)	    /* IRQ_DMA for s3c2443 */
-#define IRQ_DMA1       S3C2410_IRQ(18)
-#define IRQ_DMA2       S3C2410_IRQ(19)
-#define IRQ_DMA3       S3C2410_IRQ(20)
-#define IRQ_SDI	       S3C2410_IRQ(21)
-#define IRQ_SPI0       S3C2410_IRQ(22)
-#define IRQ_UART1      S3C2410_IRQ(23)
-#define IRQ_RESERVED24 S3C2410_IRQ(24)	    /* 40 */
-#define IRQ_NFCON      S3C2410_IRQ(24)	    /* for s3c2440 */
-#define IRQ_USBD       S3C2410_IRQ(25)
-#define IRQ_USBH       S3C2410_IRQ(26)
-#define IRQ_IIC	       S3C2410_IRQ(27)
-#define IRQ_UART0      S3C2410_IRQ(28)	    /* 44 */
-#define IRQ_SPI1       S3C2410_IRQ(29)
-#define IRQ_RTC	       S3C2410_IRQ(30)
-#define IRQ_ADCPARENT  S3C2410_IRQ(31)
-
-/* interrupts generated from the external interrupts sources */
-#define IRQ_EINT4      S3C2410_IRQ(32)	   /* 48 */
-#define IRQ_EINT5      S3C2410_IRQ(33)
-#define IRQ_EINT6      S3C2410_IRQ(34)
-#define IRQ_EINT7      S3C2410_IRQ(35)
-#define IRQ_EINT8      S3C2410_IRQ(36)
-#define IRQ_EINT9      S3C2410_IRQ(37)
-#define IRQ_EINT10     S3C2410_IRQ(38)
-#define IRQ_EINT11     S3C2410_IRQ(39)
-#define IRQ_EINT12     S3C2410_IRQ(40)
-#define IRQ_EINT13     S3C2410_IRQ(41)
-#define IRQ_EINT14     S3C2410_IRQ(42)
-#define IRQ_EINT15     S3C2410_IRQ(43)
-#define IRQ_EINT16     S3C2410_IRQ(44)
-#define IRQ_EINT17     S3C2410_IRQ(45)
-#define IRQ_EINT18     S3C2410_IRQ(46)
-#define IRQ_EINT19     S3C2410_IRQ(47)
-#define IRQ_EINT20     S3C2410_IRQ(48)	   /* 64 */
-#define IRQ_EINT21     S3C2410_IRQ(49)
-#define IRQ_EINT22     S3C2410_IRQ(50)
-#define IRQ_EINT23     S3C2410_IRQ(51)
-
-
-#define IRQ_EINT(x)    (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
-
-#define IRQ_LCD_FIFO   S3C2410_IRQ(52)
-#define IRQ_LCD_FRAME  S3C2410_IRQ(53)
-
-/* IRQs for the interal UARTs, and ADC
- * these need to be ordered in number of appearance in the
- * SUBSRC mask register
-*/
-
-#define S3C2410_IRQSUB(x)	S3C2410_IRQ((x)+54)
-
-#define IRQ_S3CUART_RX0		S3C2410_IRQSUB(0)	/* 70 */
-#define IRQ_S3CUART_TX0		S3C2410_IRQSUB(1)
-#define IRQ_S3CUART_ERR0	S3C2410_IRQSUB(2)
-
-#define IRQ_S3CUART_RX1		S3C2410_IRQSUB(3)	/* 73 */
-#define IRQ_S3CUART_TX1		S3C2410_IRQSUB(4)
-#define IRQ_S3CUART_ERR1	S3C2410_IRQSUB(5)
-
-#define IRQ_S3CUART_RX2		S3C2410_IRQSUB(6)	/* 76 */
-#define IRQ_S3CUART_TX2		S3C2410_IRQSUB(7)
-#define IRQ_S3CUART_ERR2	S3C2410_IRQSUB(8)
-
-#define IRQ_TC			S3C2410_IRQSUB(9)
-#define IRQ_ADC			S3C2410_IRQSUB(10)
-
-/* extra irqs for s3c2412 */
-
-#define IRQ_S3C2412_CFSDI	S3C2410_IRQ(21)
-
-#define IRQ_S3C2412_SDI		S3C2410_IRQSUB(13)
-#define IRQ_S3C2412_CF		S3C2410_IRQSUB(14)
-
-/* extra irqs for s3c2440 */
-
-#define IRQ_S3C2440_CAM_C	S3C2410_IRQSUB(11)	/* S3C2443 too */
-#define IRQ_S3C2440_CAM_P	S3C2410_IRQSUB(12)	/* S3C2443 too */
-#define IRQ_S3C2440_WDT		S3C2410_IRQSUB(13)
-#define IRQ_S3C2440_AC97	S3C2410_IRQSUB(14)
-
-/* irqs for s3c2443 */
-
-#define IRQ_S3C2443_DMA		S3C2410_IRQ(17)		/* IRQ_DMA1 */
-#define IRQ_S3C2443_UART3	S3C2410_IRQ(18)		/* IRQ_DMA2 */
-#define IRQ_S3C2443_CFCON	S3C2410_IRQ(19)		/* IRQ_DMA3 */
-#define IRQ_S3C2443_HSMMC	S3C2410_IRQ(20)		/* IRQ_SDI */
-#define IRQ_S3C2443_NAND	S3C2410_IRQ(24)		/* reserved */
-
-#define IRQ_S3C2443_LCD1	S3C2410_IRQSUB(14)
-#define IRQ_S3C2443_LCD2	S3C2410_IRQSUB(15)
-#define IRQ_S3C2443_LCD3	S3C2410_IRQSUB(16)
-#define IRQ_S3C2443_LCD4	S3C2410_IRQSUB(17)
-
-#define IRQ_S3C2443_DMA0	S3C2410_IRQSUB(18)
-#define IRQ_S3C2443_DMA1	S3C2410_IRQSUB(19)
-#define IRQ_S3C2443_DMA2	S3C2410_IRQSUB(20)
-#define IRQ_S3C2443_DMA3	S3C2410_IRQSUB(21)
-#define IRQ_S3C2443_DMA4	S3C2410_IRQSUB(22)
-#define IRQ_S3C2443_DMA5	S3C2410_IRQSUB(23)
-
-/* UART3 */
-#define IRQ_S3C2443_RX3		S3C2410_IRQSUB(24)
-#define IRQ_S3C2443_TX3		S3C2410_IRQSUB(25)
-#define IRQ_S3C2443_ERR3	S3C2410_IRQSUB(26)
-
-#define IRQ_S3C2443_WDT		S3C2410_IRQSUB(27)
-#define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
-
-#ifdef CONFIG_CPU_S3C2443
-#define NR_IRQS (IRQ_S3C2443_AC97+1)
-#else
-#define NR_IRQS (IRQ_S3C2440_AC97+1)
-#endif
-
-/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
-#define FIQ_START		IRQ_EINT0
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/leds-gpio.h b/include/asm-arm/arch-s3c2410/leds-gpio.h
deleted file mode 100644
index 800846e..0000000
--- a/include/asm-arm/arch-s3c2410/leds-gpio.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/leds-gpio.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - LEDs GPIO connector
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_LEDSGPIO_H
-#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h"
-
-#define S3C24XX_LEDF_ACTLOW	(1<<0)		/* LED is on when GPIO low */
-#define S3C24XX_LEDF_TRISTATE	(1<<1)		/* tristate to turn off */
-
-struct s3c24xx_led_platdata {
-	unsigned int		 gpio;
-	unsigned int		 flags;
-
-	char			*name;
-	char			*def_trigger;
-};
-
-#endif /* __ASM_ARCH_LEDSGPIO_H */
diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h
deleted file mode 100644
index b33ed3b..0000000
--- a/include/asm-arm/arch-s3c2410/map.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/map.h
- *
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H
-
-#include <asm/plat-s3c/map.h>
-
-#define S3C2410_ADDR(x)		S3C_ADDR(x)
-
-/* interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define S3C24XX_VA_IRQ	   S3C_VA_IRQ
-#define S3C2410_PA_IRQ	   (0x4A000000)
-#define S3C24XX_SZ_IRQ	   SZ_1M
-
-/* memory controller registers */
-#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
-#define S3C2410_PA_MEMCTRL (0x48000000)
-#define S3C24XX_SZ_MEMCTRL SZ_1M
-
-/* USB host controller */
-#define S3C2410_PA_USBHOST (0x49000000)
-#define S3C24XX_SZ_USBHOST SZ_1M
-
-/* DMA controller */
-#define S3C2410_PA_DMA	   (0x4B000000)
-#define S3C24XX_SZ_DMA	   SZ_1M
-
-/* Clock and Power management */
-#define S3C24XX_VA_CLKPWR  S3C_VA_SYS
-#define S3C2410_PA_CLKPWR  (0x4C000000)
-#define S3C24XX_SZ_CLKPWR  SZ_1M
-
-/* LCD controller */
-#define S3C2410_PA_LCD	   (0x4D000000)
-#define S3C24XX_SZ_LCD	   SZ_1M
-
-/* NAND flash controller */
-#define S3C2410_PA_NAND	   (0x4E000000)
-#define S3C24XX_SZ_NAND	   SZ_1M
-
-/* UARTs */
-#define S3C24XX_VA_UART	   S3C_VA_UART
-#define S3C2410_PA_UART	   (0x50000000)
-#define S3C24XX_SZ_UART	   SZ_1M
-
-/* Timers */
-#define S3C24XX_VA_TIMER   S3C_VA_TIMER
-#define S3C2410_PA_TIMER   (0x51000000)
-#define S3C24XX_SZ_TIMER   SZ_1M
-
-/* USB Device port */
-#define S3C2410_PA_USBDEV  (0x52000000)
-#define S3C24XX_SZ_USBDEV  SZ_1M
-
-/* Watchdog */
-#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
-#define S3C2410_PA_WATCHDOG (0x53000000)
-#define S3C24XX_SZ_WATCHDOG SZ_1M
-
-/* IIC hardware controller */
-#define S3C2410_PA_IIC	   (0x54000000)
-#define S3C24XX_SZ_IIC	   SZ_1M
-
-/* IIS controller */
-#define S3C2410_PA_IIS	   (0x55000000)
-#define S3C24XX_SZ_IIS	   SZ_1M
-
-/* GPIO ports */
-
-/* the calculation for the VA of this must ensure that
- * it is the same distance apart from the UART in the
- * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 maping. This puts it (currently) at
- * 0xFA800000, which is not in the way of any current mapping
- * by the base system.
-*/
-
-#define S3C2410_PA_GPIO	   (0x56000000)
-#define S3C24XX_VA_GPIO	   ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
-#define S3C24XX_SZ_GPIO	   SZ_1M
-
-/* RTC */
-#define S3C2410_PA_RTC	   (0x57000000)
-#define S3C24XX_SZ_RTC	   SZ_1M
-
-/* ADC */
-#define S3C2410_PA_ADC	   (0x58000000)
-#define S3C24XX_SZ_ADC	   SZ_1M
-
-/* SPI */
-#define S3C2410_PA_SPI	   (0x59000000)
-#define S3C24XX_SZ_SPI	   SZ_1M
-
-/* SDI */
-#define S3C2410_PA_SDI	   (0x5A000000)
-#define S3C24XX_SZ_SDI	   SZ_1M
-
-/* CAMIF */
-#define S3C2440_PA_CAMIF   (0x4F000000)
-#define S3C2440_SZ_CAMIF   SZ_1M
-
-/* AC97 */
-
-#define S3C2440_PA_AC97	   (0x5B000000)
-#define S3C2440_SZ_AC97	   SZ_1M
-
-/* S3C2443 High-speed SD/MMC */
-#define S3C2443_PA_HSMMC   (0x4A800000)
-#define S3C2443_SZ_HSMMC   (256)
-
-/* ISA style IO, for each machine to sort out mappings for, if it
- * implements it. We reserve two 16M regions for ISA.
- */
-
-#define S3C24XX_VA_ISA_WORD  S3C2410_ADDR(0x02000000)
-#define S3C24XX_VA_ISA_BYTE  S3C2410_ADDR(0x03000000)
-
-/* physical addresses of all the chip-select areas */
-
-#define S3C2410_CS0 (0x00000000)
-#define S3C2410_CS1 (0x08000000)
-#define S3C2410_CS2 (0x10000000)
-#define S3C2410_CS3 (0x18000000)
-#define S3C2410_CS4 (0x20000000)
-#define S3C2410_CS5 (0x28000000)
-#define S3C2410_CS6 (0x30000000)
-#define S3C2410_CS7 (0x38000000)
-
-#define S3C2410_SDRAM_PA    (S3C2410_CS6)
-
-/* Use a single interface for common resources between S3C24XX cpus */
-
-#define S3C24XX_PA_IRQ      S3C2410_PA_IRQ
-#define S3C24XX_PA_MEMCTRL  S3C2410_PA_MEMCTRL
-#define S3C24XX_PA_USBHOST  S3C2410_PA_USBHOST
-#define S3C24XX_PA_DMA      S3C2410_PA_DMA
-#define S3C24XX_PA_CLKPWR   S3C2410_PA_CLKPWR
-#define S3C24XX_PA_LCD      S3C2410_PA_LCD
-#define S3C24XX_PA_UART     S3C2410_PA_UART
-#define S3C24XX_PA_TIMER    S3C2410_PA_TIMER
-#define S3C24XX_PA_USBDEV   S3C2410_PA_USBDEV
-#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
-#define S3C24XX_PA_IIC      S3C2410_PA_IIC
-#define S3C24XX_PA_IIS      S3C2410_PA_IIS
-#define S3C24XX_PA_GPIO     S3C2410_PA_GPIO
-#define S3C24XX_PA_RTC      S3C2410_PA_RTC
-#define S3C24XX_PA_ADC      S3C2410_PA_ADC
-#define S3C24XX_PA_SPI      S3C2410_PA_SPI
-
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/include/asm-arm/arch-s3c2410/memory.h b/include/asm-arm/arch-s3c2410/memory.h
deleted file mode 100644
index 533e243..0000000
--- a/include/asm-arm/arch-s3c2410/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/memory.h
- *  from linux/include/asm-arm/arch-rpc/memory.h
- *
- *  Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET	UL(0x30000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-s3c2410/osiris-cpld.h b/include/asm-arm/arch-s3c2410/osiris-cpld.h
deleted file mode 100644
index 229ab23..0000000
--- a/include/asm-arm/arch-s3c2410/osiris-cpld.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/osiris-cpld.h
- *
- * Copyright 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * OSIRIS - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_OSIRISCPLD_H
-#define __ASM_ARCH_OSIRISCPLD_H
-
-/* CTRL0 - NAND WP control */
-
-#define OSIRIS_CTRL0_NANDSEL		(0x3)
-#define OSIRIS_CTRL0_BOOT_INT		(1<<3)
-#define OSIRIS_CTRL0_PCMCIA		(1<<4)
-#define OSIRIS_CTRL0_FIX8		(1<<5)
-#define OSIRIS_CTRL0_PCMCIA_nWAIT	(1<<6)
-#define OSIRIS_CTRL0_PCMCIA_nIOIS16	(1<<7)
-
-#define OSIRIS_CTRL1_FIX8		(1<<0)
-
-#define OSIRIS_ID_REVMASK		(0x7)
-
-#endif /* __ASM_ARCH_OSIRISCPLD_H */
diff --git a/include/asm-arm/arch-s3c2410/osiris-map.h b/include/asm-arm/arch-s3c2410/osiris-map.h
deleted file mode 100644
index b5c74d2..0000000
--- a/include/asm-arm/arch-s3c2410/osiris-map.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/osiris-map.h
- *
- * (c) 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * OSIRIS - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-#ifndef __ASM_ARCH_OSIRISMAP_H
-#define __ASM_ARCH_OSIRISMAP_H
-
-/* start peripherals off after the S3C2410 */
-
-#define OSIRIS_IOADDR(x)	(S3C2410_ADDR((x) + 0x04000000))
-
-#define OSIRIS_PA_CPLD		(S3C2410_CS1 | (1<<26))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define OSIRIS_VA_CTRL0		OSIRIS_IOADDR(0x00000000)
-#define OSIRIS_PA_CTRL0		(OSIRIS_PA_CPLD)
-
-#define OSIRIS_VA_CTRL1		OSIRIS_IOADDR(0x00100000)
-#define OSIRIS_PA_CTRL1		(OSIRIS_PA_CPLD + (1<<23))
-
-#define OSIRIS_VA_CTRL2		OSIRIS_IOADDR(0x00200000)
-#define OSIRIS_PA_CTRL2		(OSIRIS_PA_CPLD + (2<<23))
-
-#define OSIRIS_VA_CTRL3		OSIRIS_IOADDR(0x00300000)
-#define OSIRIS_PA_CTRL3		(OSIRIS_PA_CPLD + (2<<23))
-
-#define OSIRIS_VA_IDREG		OSIRIS_IOADDR(0x00700000)
-#define OSIRIS_PA_IDREG		(OSIRIS_PA_CPLD + (7<<23))
-
-#endif /* __ASM_ARCH_OSIRISMAP_H */
diff --git a/include/asm-arm/arch-s3c2410/otom-map.h b/include/asm-arm/arch-s3c2410/otom-map.h
deleted file mode 100644
index e40c934..0000000
--- a/include/asm-arm/arch-s3c2410/otom-map.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/otom-map.h
- *
- * (c) 2005 Guillaume GOURAT / NexVision
- *          guillaume.gourat@nexvision.fr
- *
- * NexVision OTOM board memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x01300000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space.
- */
-
-#ifndef __ASM_ARCH_OTOMMAP_H
-#define __ASM_ARCH_OTOMMAP_H
-
-#define OTOM_PA_CS8900A_BASE       (S3C2410_CS3 + 0x01000000)	/* nGCS3 +0x01000000 */
-#define OTOM_VA_CS8900A_BASE       S3C2410_ADDR(0x04000000)		/* 0xF4000000 */
-
-/* physical offset addresses for the peripherals */
-
-#define OTOM_PA_FLASH0_BASE        (S3C2410_CS0)				/* Bank 0 */
-
-#endif /* __ASM_ARCH_OTOMMAP_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h
deleted file mode 100644
index 3766135..0000000
--- a/include/asm-arm/arch-s3c2410/regs-clock.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-clock.h
- *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- *		      http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 clock register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_CLOCK
-#define __ASM_ARM_REGS_CLOCK "$Id: clock.h,v 1.4 2003/04/30 14:50:51 ben Exp $"
-
-#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s)))
-
-#define S3C2410_LOCKTIME    S3C2410_CLKREG(0x00)
-#define S3C2410_MPLLCON	    S3C2410_CLKREG(0x04)
-#define S3C2410_UPLLCON	    S3C2410_CLKREG(0x08)
-#define S3C2410_CLKCON	    S3C2410_CLKREG(0x0C)
-#define S3C2410_CLKSLOW	    S3C2410_CLKREG(0x10)
-#define S3C2410_CLKDIVN	    S3C2410_CLKREG(0x14)
-
-#define S3C2410_CLKCON_IDLE	     (1<<2)
-#define S3C2410_CLKCON_POWER	     (1<<3)
-#define S3C2410_CLKCON_NAND	     (1<<4)
-#define S3C2410_CLKCON_LCDC	     (1<<5)
-#define S3C2410_CLKCON_USBH	     (1<<6)
-#define S3C2410_CLKCON_USBD	     (1<<7)
-#define S3C2410_CLKCON_PWMT	     (1<<8)
-#define S3C2410_CLKCON_SDI	     (1<<9)
-#define S3C2410_CLKCON_UART0	     (1<<10)
-#define S3C2410_CLKCON_UART1	     (1<<11)
-#define S3C2410_CLKCON_UART2	     (1<<12)
-#define S3C2410_CLKCON_GPIO	     (1<<13)
-#define S3C2410_CLKCON_RTC	     (1<<14)
-#define S3C2410_CLKCON_ADC	     (1<<15)
-#define S3C2410_CLKCON_IIC	     (1<<16)
-#define S3C2410_CLKCON_IIS	     (1<<17)
-#define S3C2410_CLKCON_SPI	     (1<<18)
-
-#define S3C2410_PLLCON_MDIVSHIFT     12
-#define S3C2410_PLLCON_PDIVSHIFT     4
-#define S3C2410_PLLCON_SDIVSHIFT     0
-#define S3C2410_PLLCON_MDIVMASK	     ((1<<(1+(19-12)))-1)
-#define S3C2410_PLLCON_PDIVMASK	     ((1<<5)-1)
-#define S3C2410_PLLCON_SDIVMASK	     3
-
-/* DCLKCON register addresses in gpio.h */
-
-#define S3C2410_DCLKCON_DCLK0EN	     (1<<0)
-#define S3C2410_DCLKCON_DCLK0_PCLK   (0<<1)
-#define S3C2410_DCLKCON_DCLK0_UCLK   (1<<1)
-#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8)
-#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8)
-
-#define S3C2410_DCLKCON_DCLK1EN	     (1<<16)
-#define S3C2410_DCLKCON_DCLK1_PCLK   (0<<17)
-#define S3C2410_DCLKCON_DCLK1_UCLK   (1<<17)
-#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24)
-#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24)
-
-#define S3C2410_CLKDIVN_PDIVN	     (1<<0)
-#define S3C2410_CLKDIVN_HDIVN	     (1<<1)
-
-#define S3C2410_CLKSLOW_UCLK_OFF	(1<<7)
-#define S3C2410_CLKSLOW_MPLL_OFF	(1<<5)
-#define S3C2410_CLKSLOW_SLOW		(1<<4)
-#define S3C2410_CLKSLOW_SLOWVAL(x)	(x)
-#define S3C2410_CLKSLOW_GET_SLOWVAL(x)	((x) & 7)
-
-#ifndef __ASSEMBLY__
-
-#include <asm/div64.h>
-
-static inline unsigned int
-s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT;
-	pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT;
-	sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT;
-
-	mdiv &= S3C2410_PLLCON_MDIVMASK;
-	pdiv &= S3C2410_PLLCON_PDIVMASK;
-	sdiv &= S3C2410_PLLCON_SDIVMASK;
-
-	fvco = (uint64_t)baseclk * (mdiv + 8);
-	do_div(fvco, (pdiv + 2) << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-#endif /* __ASSEMBLY__ */
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-
-/* extra registers */
-#define S3C2440_CAMDIVN	    S3C2410_CLKREG(0x18)
-
-#define S3C2440_CLKCON_CAMERA        (1<<19)
-#define S3C2440_CLKCON_AC97          (1<<20)
-
-#define S3C2440_CLKDIVN_PDIVN	     (1<<0)
-#define S3C2440_CLKDIVN_HDIVN_MASK   (3<<1)
-#define S3C2440_CLKDIVN_HDIVN_1      (0<<1)
-#define S3C2440_CLKDIVN_HDIVN_2      (1<<1)
-#define S3C2440_CLKDIVN_HDIVN_4_8    (2<<1)
-#define S3C2440_CLKDIVN_HDIVN_3_6    (3<<1)
-#define S3C2440_CLKDIVN_UCLK         (1<<3)
-
-#define S3C2440_CAMDIVN_CAMCLK_MASK  (0xf<<0)
-#define S3C2440_CAMDIVN_CAMCLK_SEL   (1<<4)
-#define S3C2440_CAMDIVN_HCLK3_HALF   (1<<8)
-#define S3C2440_CAMDIVN_HCLK4_HALF   (1<<9)
-#define S3C2440_CAMDIVN_DVSEN        (1<<12)
-
-#define S3C2442_CAMDIVN_CAMCLK_DIV3  (1<<5)
-
-#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-
-#define S3C2412_OSCSET		S3C2410_CLKREG(0x18)
-#define S3C2412_CLKSRC		S3C2410_CLKREG(0x1C)
-
-#define S3C2412_PLLCON_OFF		(1<<20)
-
-#define S3C2412_CLKDIVN_PDIVN		(1<<2)
-#define S3C2412_CLKDIVN_HDIVN_MASK	(3<<0)
-#define S3C2412_CLKDIVN_ARMDIVN		(1<<3)
-#define S3C2412_CLKDIVN_DVSEN		(1<<4)
-#define S3C2412_CLKDIVN_HALFHCLK	(1<<5)
-#define S3C2412_CLKDIVN_USB48DIV	(1<<6)
-#define S3C2412_CLKDIVN_UARTDIV_MASK	(15<<8)
-#define S3C2412_CLKDIVN_UARTDIV_SHIFT	(8)
-#define S3C2412_CLKDIVN_I2SDIV_MASK	(15<<12)
-#define S3C2412_CLKDIVN_I2SDIV_SHIFT	(12)
-#define S3C2412_CLKDIVN_CAMDIV_MASK	(15<<16)
-#define S3C2412_CLKDIVN_CAMDIV_SHIFT	(16)
-
-#define S3C2412_CLKCON_WDT		(1<<28)
-#define S3C2412_CLKCON_SPI		(1<<27)
-#define S3C2412_CLKCON_IIS		(1<<26)
-#define S3C2412_CLKCON_IIC		(1<<25)
-#define S3C2412_CLKCON_ADC		(1<<24)
-#define S3C2412_CLKCON_RTC		(1<<23)
-#define S3C2412_CLKCON_GPIO		(1<<22)
-#define S3C2412_CLKCON_UART2		(1<<21)
-#define S3C2412_CLKCON_UART1		(1<<20)
-#define S3C2412_CLKCON_UART0		(1<<19)
-#define S3C2412_CLKCON_SDI		(1<<18)
-#define S3C2412_CLKCON_PWMT		(1<<17)
-#define S3C2412_CLKCON_USBD		(1<<16)
-#define S3C2412_CLKCON_CAMCLK		(1<<15)
-#define S3C2412_CLKCON_UARTCLK		(1<<14)
-/* missing 13 */
-#define S3C2412_CLKCON_USB_HOST48	(1<<12)
-#define S3C2412_CLKCON_USB_DEV48	(1<<11)
-#define S3C2412_CLKCON_HCLKdiv2		(1<<10)
-#define S3C2412_CLKCON_HCLKx2		(1<<9)
-#define S3C2412_CLKCON_SDRAM		(1<<8)
-/* missing 7 */
-#define S3C2412_CLKCON_USBH		S3C2410_CLKCON_USBH
-#define S3C2412_CLKCON_LCDC		S3C2410_CLKCON_LCDC
-#define S3C2412_CLKCON_NAND		S3C2410_CLKCON_NAND
-#define S3C2412_CLKCON_DMA3		(1<<3)
-#define S3C2412_CLKCON_DMA2		(1<<2)
-#define S3C2412_CLKCON_DMA1		(1<<1)
-#define S3C2412_CLKCON_DMA0		(1<<0)
-
-/* clock sourec controls */
-
-#define S3C2412_CLKSRC_EXTCLKDIV_MASK		(7 << 0)
-#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT		(0)
-#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV	(1<<3)
-#define S3C2412_CLKSRC_MSYSCLK_MPLL		(1<<4)
-#define S3C2412_CLKSRC_USYSCLK_UPLL		(1<<5)
-#define S3C2412_CLKSRC_UARTCLK_MPLL		(1<<8)
-#define S3C2412_CLKSRC_I2SCLK_MPLL		(1<<9)
-#define S3C2412_CLKSRC_USBCLK_HCLK		(1<<10)
-#define S3C2412_CLKSRC_CAMCLK_HCLK		(1<<11)
-#define S3C2412_CLKSRC_UREFCLK_EXTCLK	(1<<12)
-#define S3C2412_CLKSRC_EREFCLK_EXTCLK	(1<<14)
-
-#endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */
-
-#endif /* __ASM_ARM_REGS_CLOCK */
diff --git a/include/asm-arm/arch-s3c2410/regs-dsc.h b/include/asm-arm/arch-s3c2410/regs-dsc.h
deleted file mode 100644
index 1235df7..0000000
--- a/include/asm-arm/arch-s3c2410/regs-dsc.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-dsc.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2440/S3C2412 Signal Drive Strength Control
-*/
-
-
-#ifndef __ASM_ARCH_REGS_DSC_H
-#define __ASM_ARCH_REGS_DSC_H "2440-dsc"
-
-#if defined(CONFIG_CPU_S3C2412)
-#define S3C2412_DSC0	   S3C2410_GPIOREG(0xdc)
-#define S3C2412_DSC1	   S3C2410_GPIOREG(0xe0)
-#endif
-
-#if defined(CONFIG_CPU_S3C244X)
-
-#define S3C2440_DSC0	   S3C2410_GPIOREG(0xc4)
-#define S3C2440_DSC1	   S3C2410_GPIOREG(0xc8)
-
-#define S3C2440_SELECT_DSC0 (0)
-#define S3C2440_SELECT_DSC1 (1<<31)
-
-#define S3C2440_DSC_GETSHIFT(x) ((x) & 31)
-
-#define S3C2440_DSC0_DISABLE	(1<<31)
-
-#define S3C2440_DSC0_ADDR       (S3C2440_SELECT_DSC0 | 8)
-#define S3C2440_DSC0_ADDR_12mA  (0<<8)
-#define S3C2440_DSC0_ADDR_10mA  (1<<8)
-#define S3C2440_DSC0_ADDR_8mA   (2<<8)
-#define S3C2440_DSC0_ADDR_6mA   (3<<8)
-#define S3C2440_DSC0_ADDR_MASK  (3<<8)
-
-/* D24..D31 */
-#define S3C2440_DSC0_DATA3      (S3C2440_SELECT_DSC0 | 6)
-#define S3C2440_DSC0_DATA3_12mA (0<<6)
-#define S3C2440_DSC0_DATA3_10mA (1<<6)
-#define S3C2440_DSC0_DATA3_8mA  (2<<6)
-#define S3C2440_DSC0_DATA3_6mA  (3<<6)
-#define S3C2440_DSC0_DATA3_MASK (3<<6)
-
-/* D16..D23 */
-#define S3C2440_DSC0_DATA2      (S3C2440_SELECT_DSC0 | 4)
-#define S3C2440_DSC0_DATA2_12mA (0<<4)
-#define S3C2440_DSC0_DATA2_10mA (1<<4)
-#define S3C2440_DSC0_DATA2_8mA  (2<<4)
-#define S3C2440_DSC0_DATA2_6mA  (3<<4)
-#define S3C2440_DSC0_DATA2_MASK (3<<4)
-
-/* D8..D15 */
-#define S3C2440_DSC0_DATA1      (S3C2440_SELECT_DSC0 | 2)
-#define S3C2440_DSC0_DATA1_12mA (0<<2)
-#define S3C2440_DSC0_DATA1_10mA (1<<2)
-#define S3C2440_DSC0_DATA1_8mA  (2<<2)
-#define S3C2440_DSC0_DATA1_6mA  (3<<2)
-#define S3C2440_DSC0_DATA1_MASK (3<<2)
-
-/* D0..D7 */
-#define S3C2440_DSC0_DATA0      (S3C2440_SELECT_DSC0 | 0)
-#define S3C2440_DSC0_DATA0_12mA (0<<0)
-#define S3C2440_DSC0_DATA0_10mA (1<<0)
-#define S3C2440_DSC0_DATA0_8mA  (2<<0)
-#define S3C2440_DSC0_DATA0_6mA  (3<<0)
-#define S3C2440_DSC0_DATA0_MASK (3<<0)
-
-#define S3C2440_DSC1_SCK1       (S3C2440_SELECT_DSC1 | 28)
-#define S3C2440_DSC1_SCK1_12mA  (0<<28)
-#define S3C2440_DSC1_SCK1_10mA  (1<<28)
-#define S3C2440_DSC1_SCK1_8mA   (2<<28)
-#define S3C2440_DSC1_SCK1_6mA   (3<<28)
-#define S3C2440_DSC1_SCK1_MASK  (3<<28)
-
-#define S3C2440_DSC1_SCK0       (S3C2440_SELECT_DSC1 | 26)
-#define S3C2440_DSC1_SCK0_12mA  (0<<26)
-#define S3C2440_DSC1_SCK0_10mA  (1<<26)
-#define S3C2440_DSC1_SCK0_8mA   (2<<26)
-#define S3C2440_DSC1_SCK0_6mA   (3<<26)
-#define S3C2440_DSC1_SCK0_MASK  (3<<26)
-
-#define S3C2440_DSC1_SCKE       (S3C2440_SELECT_DSC1 | 24)
-#define S3C2440_DSC1_SCKE_10mA  (0<<24)
-#define S3C2440_DSC1_SCKE_8mA   (1<<24)
-#define S3C2440_DSC1_SCKE_6mA   (2<<24)
-#define S3C2440_DSC1_SCKE_4mA   (3<<24)
-#define S3C2440_DSC1_SCKE_MASK  (3<<24)
-
-/* SDRAM nRAS/nCAS */
-#define S3C2440_DSC1_SDR        (S3C2440_SELECT_DSC1 | 22)
-#define S3C2440_DSC1_SDR_10mA   (0<<22)
-#define S3C2440_DSC1_SDR_8mA    (1<<22)
-#define S3C2440_DSC1_SDR_6mA    (2<<22)
-#define S3C2440_DSC1_SDR_4mA    (3<<22)
-#define S3C2440_DSC1_SDR_MASK   (3<<22)
-
-/* NAND Flash Controller */
-#define S3C2440_DSC1_NFC        (S3C2440_SELECT_DSC1 | 20)
-#define S3C2440_DSC1_NFC_10mA   (0<<20)
-#define S3C2440_DSC1_NFC_8mA    (1<<20)
-#define S3C2440_DSC1_NFC_6mA    (2<<20)
-#define S3C2440_DSC1_NFC_4mA    (3<<20)
-#define S3C2440_DSC1_NFC_MASK   (3<<20)
-
-/* nBE[0..3] */
-#define S3C2440_DSC1_nBE        (S3C2440_SELECT_DSC1 | 18)
-#define S3C2440_DSC1_nBE_10mA   (0<<18)
-#define S3C2440_DSC1_nBE_8mA    (1<<18)
-#define S3C2440_DSC1_nBE_6mA    (2<<18)
-#define S3C2440_DSC1_nBE_4mA    (3<<18)
-#define S3C2440_DSC1_nBE_MASK   (3<<18)
-
-#define S3C2440_DSC1_WOE        (S3C2440_SELECT_DSC1 | 16)
-#define S3C2440_DSC1_WOE_10mA   (0<<16)
-#define S3C2440_DSC1_WOE_8mA    (1<<16)
-#define S3C2440_DSC1_WOE_6mA    (2<<16)
-#define S3C2440_DSC1_WOE_4mA    (3<<16)
-#define S3C2440_DSC1_WOE_MASK   (3<<16)
-
-#define S3C2440_DSC1_CS7        (S3C2440_SELECT_DSC1 | 14)
-#define S3C2440_DSC1_CS7_10mA   (0<<14)
-#define S3C2440_DSC1_CS7_8mA    (1<<14)
-#define S3C2440_DSC1_CS7_6mA    (2<<14)
-#define S3C2440_DSC1_CS7_4mA    (3<<14)
-#define S3C2440_DSC1_CS7_MASK   (3<<14)
-
-#define S3C2440_DSC1_CS6        (S3C2440_SELECT_DSC1 | 12)
-#define S3C2440_DSC1_CS6_10mA   (0<<12)
-#define S3C2440_DSC1_CS6_8mA    (1<<12)
-#define S3C2440_DSC1_CS6_6mA    (2<<12)
-#define S3C2440_DSC1_CS6_4mA    (3<<12)
-#define S3C2440_DSC1_CS6_MASK   (3<<12)
-
-#define S3C2440_DSC1_CS5        (S3C2440_SELECT_DSC1 | 10)
-#define S3C2440_DSC1_CS5_10mA   (0<<10)
-#define S3C2440_DSC1_CS5_8mA    (1<<10)
-#define S3C2440_DSC1_CS5_6mA    (2<<10)
-#define S3C2440_DSC1_CS5_4mA    (3<<10)
-#define S3C2440_DSC1_CS5_MASK   (3<<10)
-
-#define S3C2440_DSC1_CS4        (S3C2440_SELECT_DSC1 | 8)
-#define S3C2440_DSC1_CS4_10mA   (0<<8)
-#define S3C2440_DSC1_CS4_8mA    (1<<8)
-#define S3C2440_DSC1_CS4_6mA    (2<<8)
-#define S3C2440_DSC1_CS4_4mA    (3<<8)
-#define S3C2440_DSC1_CS4_MASK   (3<<8)
-
-#define S3C2440_DSC1_CS3        (S3C2440_SELECT_DSC1 | 6)
-#define S3C2440_DSC1_CS3_10mA   (0<<6)
-#define S3C2440_DSC1_CS3_8mA    (1<<6)
-#define S3C2440_DSC1_CS3_6mA    (2<<6)
-#define S3C2440_DSC1_CS3_4mA    (3<<6)
-#define S3C2440_DSC1_CS3_MASK   (3<<6)
-
-#define S3C2440_DSC1_CS2        (S3C2440_SELECT_DSC1 | 4)
-#define S3C2440_DSC1_CS2_10mA   (0<<4)
-#define S3C2440_DSC1_CS2_8mA    (1<<4)
-#define S3C2440_DSC1_CS2_6mA    (2<<4)
-#define S3C2440_DSC1_CS2_4mA    (3<<4)
-#define S3C2440_DSC1_CS2_MASK   (3<<4)
-
-#define S3C2440_DSC1_CS1        (S3C2440_SELECT_DSC1 | 2)
-#define S3C2440_DSC1_CS1_10mA   (0<<2)
-#define S3C2440_DSC1_CS1_8mA    (1<<2)
-#define S3C2440_DSC1_CS1_6mA    (2<<2)
-#define S3C2440_DSC1_CS1_4mA    (3<<2)
-#define S3C2440_DSC1_CS1_MASK   (3<<2)
-
-#define S3C2440_DSC1_CS0        (S3C2440_SELECT_DSC1 | 0)
-#define S3C2440_DSC1_CS0_10mA   (0<<0)
-#define S3C2440_DSC1_CS0_8mA    (1<<0)
-#define S3C2440_DSC1_CS0_6mA    (2<<0)
-#define S3C2440_DSC1_CS0_4mA    (3<<0)
-#define S3C2440_DSC1_CS0_MASK   (3<<0)
-
-#endif /* CONFIG_CPU_S3C2440 */
-
-#endif	/* __ASM_ARCH_REGS_DSC_H */
-
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
deleted file mode 100644
index 497dd06..0000000
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ /dev/null
@@ -1,1163 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-gpio.h
- *
- * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
- *		           http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 GPIO register definitions
-*/
-
-
-#ifndef __ASM_ARCH_REGS_GPIO_H
-#define __ASM_ARCH_REGS_GPIO_H "$Id: gpio.h,v 1.5 2003/05/19 12:51:08 ben Exp $"
-
-#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
-
-#define S3C2410_GPIO_BANKA   (32*0)
-#define S3C2410_GPIO_BANKB   (32*1)
-#define S3C2410_GPIO_BANKC   (32*2)
-#define S3C2410_GPIO_BANKD   (32*3)
-#define S3C2410_GPIO_BANKE   (32*4)
-#define S3C2410_GPIO_BANKF   (32*5)
-#define S3C2410_GPIO_BANKG   (32*6)
-#define S3C2410_GPIO_BANKH   (32*7)
-
-#ifdef CONFIG_CPU_S3C2400
-#define S3C24XX_GPIO_BASE(x)  S3C2400_GPIO_BASE(x)
-#define S3C24XX_MISCCR        S3C2400_MISCCR
-#else
-#define S3C24XX_GPIO_BASE(x)  S3C2410_GPIO_BASE(x)
-#define S3C24XX_MISCCR	      S3C24XX_GPIOREG2(0x80)
-#endif /* CONFIG_CPU_S3C2400 */
-
-
-/* S3C2400 doesn't have a 1:1 mapping to S3C2410 gpio base pins */
-
-#define S3C2400_BANKNUM(pin)     (((pin) & ~31) / 32)
-#define S3C2400_BASEA2B(pin)     ((((pin) & ~31) >> 2))
-#define S3C2400_BASEC2H(pin)     ((S3C2400_BANKNUM(pin) * 10) + \
-                                 (2 * (S3C2400_BANKNUM(pin)-2)))
-
-#define S3C2400_GPIO_BASE(pin)   (pin < S3C2410_GPIO_BANKC ? \
-                                 S3C2400_BASEA2B(pin)+S3C24XX_VA_GPIO : \
-                                 S3C2400_BASEC2H(pin)+S3C24XX_VA_GPIO)
-
-
-#define S3C2410_GPIO_BASE(pin)   ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO)
-#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31)
-
-/* general configuration options */
-
-#define S3C2410_GPIO_LEAVE   (0xFFFFFFFF)
-#define S3C2410_GPIO_INPUT   (0xFFFFFFF0)	/* not available on A */
-#define S3C2410_GPIO_OUTPUT  (0xFFFFFFF1)
-#define S3C2410_GPIO_IRQ     (0xFFFFFFF2)	/* not available for all */
-#define S3C2410_GPIO_SFN2    (0xFFFFFFF2)	/* bank A => addr/cs/nand */
-#define S3C2410_GPIO_SFN3    (0xFFFFFFF3)	/* not available on A */
-
-/* register address for the GPIO registers.
- * S3C24XX_GPIOREG2 is for the second set of registers in the
- * GPIO which move between s3c2410 and s3c2412 type systems */
-
-#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
-#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2)
-
-
-/* configure GPIO ports A..G */
-
-/* port A - S3C2410: 22bits, zero in bit X makes pin X output
- *          S3C2400: 18bits, zero in bit X makes pin X output
- * 1 makes port special function, this is default
-*/
-#define S3C2410_GPACON	   S3C2410_GPIOREG(0x00)
-#define S3C2410_GPADAT	   S3C2410_GPIOREG(0x04)
-
-#define S3C2400_GPACON	   S3C2410_GPIOREG(0x00)
-#define S3C2400_GPADAT	   S3C2410_GPIOREG(0x04)
-
-#define S3C2410_GPA0         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
-#define S3C2410_GPA0_OUT     (0<<0)
-#define S3C2410_GPA0_ADDR0   (1<<0)
-
-#define S3C2410_GPA1         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
-#define S3C2410_GPA1_OUT     (0<<1)
-#define S3C2410_GPA1_ADDR16  (1<<1)
-
-#define S3C2410_GPA2         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
-#define S3C2410_GPA2_OUT     (0<<2)
-#define S3C2410_GPA2_ADDR17  (1<<2)
-
-#define S3C2410_GPA3         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
-#define S3C2410_GPA3_OUT     (0<<3)
-#define S3C2410_GPA3_ADDR18  (1<<3)
-
-#define S3C2410_GPA4         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
-#define S3C2410_GPA4_OUT     (0<<4)
-#define S3C2410_GPA4_ADDR19  (1<<4)
-
-#define S3C2410_GPA5         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
-#define S3C2410_GPA5_OUT     (0<<5)
-#define S3C2410_GPA5_ADDR20  (1<<5)
-
-#define S3C2410_GPA6         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
-#define S3C2410_GPA6_OUT     (0<<6)
-#define S3C2410_GPA6_ADDR21  (1<<6)
-
-#define S3C2410_GPA7         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
-#define S3C2410_GPA7_OUT     (0<<7)
-#define S3C2410_GPA7_ADDR22  (1<<7)
-
-#define S3C2410_GPA8         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
-#define S3C2410_GPA8_OUT     (0<<8)
-#define S3C2410_GPA8_ADDR23  (1<<8)
-
-#define S3C2410_GPA9         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
-#define S3C2410_GPA9_OUT     (0<<9)
-#define S3C2410_GPA9_ADDR24  (1<<9)
-
-#define S3C2410_GPA10        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
-#define S3C2410_GPA10_OUT    (0<<10)
-#define S3C2410_GPA10_ADDR25 (1<<10)
-#define S3C2400_GPA10_SCKE   (1<<10)
-
-#define S3C2410_GPA11        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
-#define S3C2410_GPA11_OUT    (0<<11)
-#define S3C2410_GPA11_ADDR26 (1<<11)
-#define S3C2400_GPA11_nCAS0  (1<<11)
-
-#define S3C2410_GPA12        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
-#define S3C2410_GPA12_OUT    (0<<12)
-#define S3C2410_GPA12_nGCS1  (1<<12)
-#define S3C2400_GPA12_nCAS1  (1<<12)
-
-#define S3C2410_GPA13        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
-#define S3C2410_GPA13_OUT    (0<<13)
-#define S3C2410_GPA13_nGCS2  (1<<13)
-#define S3C2400_GPA13_nGCS1  (1<<13)
-
-#define S3C2410_GPA14        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
-#define S3C2410_GPA14_OUT    (0<<14)
-#define S3C2410_GPA14_nGCS3  (1<<14)
-#define S3C2400_GPA14_nGCS2  (1<<14)
-
-#define S3C2410_GPA15        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
-#define S3C2410_GPA15_OUT    (0<<15)
-#define S3C2410_GPA15_nGCS4  (1<<15)
-#define S3C2400_GPA15_nGCS3  (1<<15)
-
-#define S3C2410_GPA16        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
-#define S3C2410_GPA16_OUT    (0<<16)
-#define S3C2410_GPA16_nGCS5  (1<<16)
-#define S3C2400_GPA16_nGCS4  (1<<16)
-
-#define S3C2410_GPA17        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
-#define S3C2410_GPA17_OUT    (0<<17)
-#define S3C2410_GPA17_CLE    (1<<17)
-#define S3C2400_GPA17_nGCS5  (1<<17)
-
-#define S3C2410_GPA18        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
-#define S3C2410_GPA18_OUT    (0<<18)
-#define S3C2410_GPA18_ALE    (1<<18)
-
-#define S3C2410_GPA19        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
-#define S3C2410_GPA19_OUT    (0<<19)
-#define S3C2410_GPA19_nFWE   (1<<19)
-
-#define S3C2410_GPA20        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
-#define S3C2410_GPA20_OUT    (0<<20)
-#define S3C2410_GPA20_nFRE   (1<<20)
-
-#define S3C2410_GPA21        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
-#define S3C2410_GPA21_OUT    (0<<21)
-#define S3C2410_GPA21_nRSTOUT (1<<21)
-
-#define S3C2410_GPA22        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
-#define S3C2410_GPA22_OUT    (0<<22)
-#define S3C2410_GPA22_nFCE   (1<<22)
-
-/* 0x08 and 0x0c are reserved on S3C2410 */
-
-/* S3C2410:
- * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
- *   00 = input, 01 = output, 10=special function, 11=reserved
-
- * S3C2400:
- * GPB is 16 IO pins, each configured by 2 bits each in GPBCON.
- *   00 = input, 01 = output, 10=data, 11=special function
-
- * bit 0,1 = pin 0, 2,3= pin 1...
- *
- * CPBUP = pull up resistor control, 1=disabled, 0=enabled
-*/
-
-#define S3C2410_GPBCON	   S3C2410_GPIOREG(0x10)
-#define S3C2410_GPBDAT	   S3C2410_GPIOREG(0x14)
-#define S3C2410_GPBUP	   S3C2410_GPIOREG(0x18)
-
-#define S3C2400_GPBCON	   S3C2410_GPIOREG(0x08)
-#define S3C2400_GPBDAT	   S3C2410_GPIOREG(0x0C)
-#define S3C2400_GPBUP	   S3C2410_GPIOREG(0x10)
-
-/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
-
-#define S3C2410_GPB0         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
-#define S3C2410_GPB0_INP     (0x00 << 0)
-#define S3C2410_GPB0_OUTP    (0x01 << 0)
-#define S3C2410_GPB0_TOUT0   (0x02 << 0)
-#define S3C2400_GPB0_DATA16  (0x02 << 0)
-
-#define S3C2410_GPB1         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
-#define S3C2410_GPB1_INP     (0x00 << 2)
-#define S3C2410_GPB1_OUTP    (0x01 << 2)
-#define S3C2410_GPB1_TOUT1   (0x02 << 2)
-#define S3C2400_GPB1_DATA17  (0x02 << 2)
-
-#define S3C2410_GPB2         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
-#define S3C2410_GPB2_INP     (0x00 << 4)
-#define S3C2410_GPB2_OUTP    (0x01 << 4)
-#define S3C2410_GPB2_TOUT2   (0x02 << 4)
-#define S3C2400_GPB2_DATA18  (0x02 << 4)
-#define S3C2400_GPB2_TCLK1   (0x03 << 4)
-
-#define S3C2410_GPB3         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
-#define S3C2410_GPB3_INP     (0x00 << 6)
-#define S3C2410_GPB3_OUTP    (0x01 << 6)
-#define S3C2410_GPB3_TOUT3   (0x02 << 6)
-#define S3C2400_GPB3_DATA19  (0x02 << 6)
-#define S3C2400_GPB3_TXD1    (0x03 << 6)
-
-#define S3C2410_GPB4         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
-#define S3C2410_GPB4_INP     (0x00 << 8)
-#define S3C2410_GPB4_OUTP    (0x01 << 8)
-#define S3C2410_GPB4_TCLK0   (0x02 << 8)
-#define S3C2400_GPB4_DATA20  (0x02 << 8)
-#define S3C2410_GPB4_MASK    (0x03 << 8)
-#define S3C2400_GPB4_RXD1    (0x03 << 8)
-#define S3C2400_GPB4_MASK    (0x03 << 8)
-
-#define S3C2410_GPB5         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
-#define S3C2410_GPB5_INP     (0x00 << 10)
-#define S3C2410_GPB5_OUTP    (0x01 << 10)
-#define S3C2410_GPB5_nXBACK  (0x02 << 10)
-#define S3C2443_GPB5_XBACK   (0x03 << 10)
-#define S3C2400_GPB5_DATA21  (0x02 << 10)
-#define S3C2400_GPB5_nCTS1   (0x03 << 10)
-
-#define S3C2410_GPB6         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
-#define S3C2410_GPB6_INP     (0x00 << 12)
-#define S3C2410_GPB6_OUTP    (0x01 << 12)
-#define S3C2410_GPB6_nXBREQ  (0x02 << 12)
-#define S3C2443_GPB6_XBREQ   (0x03 << 12)
-#define S3C2400_GPB6_DATA22  (0x02 << 12)
-#define S3C2400_GPB6_nRTS1   (0x03 << 12)
-
-#define S3C2410_GPB7         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
-#define S3C2410_GPB7_INP     (0x00 << 14)
-#define S3C2410_GPB7_OUTP    (0x01 << 14)
-#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
-#define S3C2443_GPB7_XDACK1  (0x03 << 14)
-#define S3C2400_GPB7_DATA23  (0x02 << 14)
-
-#define S3C2410_GPB8         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
-#define S3C2410_GPB8_INP     (0x00 << 16)
-#define S3C2410_GPB8_OUTP    (0x01 << 16)
-#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
-#define S3C2400_GPB8_DATA24  (0x02 << 16)
-
-#define S3C2410_GPB9         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
-#define S3C2410_GPB9_INP     (0x00 << 18)
-#define S3C2410_GPB9_OUTP    (0x01 << 18)
-#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
-#define S3C2443_GPB9_XDACK0  (0x03 << 18)
-#define S3C2400_GPB9_DATA25  (0x02 << 18)
-#define S3C2400_GPB9_I2SSDI  (0x03 << 18)
-
-#define S3C2410_GPB10        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
-#define S3C2410_GPB10_INP    (0x00 << 20)
-#define S3C2410_GPB10_OUTP   (0x01 << 20)
-#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
-#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
-#define S3C2400_GPB10_DATA26 (0x02 << 20)
-#define S3C2400_GPB10_nSS    (0x03 << 20)
-
-#define S3C2400_GPB11        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
-#define S3C2400_GPB11_INP    (0x00 << 22)
-#define S3C2400_GPB11_OUTP   (0x01 << 22)
-#define S3C2400_GPB11_DATA27 (0x02 << 22)
-
-#define S3C2400_GPB12        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
-#define S3C2400_GPB12_INP    (0x00 << 24)
-#define S3C2400_GPB12_OUTP   (0x01 << 24)
-#define S3C2400_GPB12_DATA28 (0x02 << 24)
-
-#define S3C2400_GPB13        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
-#define S3C2400_GPB13_INP    (0x00 << 26)
-#define S3C2400_GPB13_OUTP   (0x01 << 26)
-#define S3C2400_GPB13_DATA29 (0x02 << 26)
-
-#define S3C2400_GPB14        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
-#define S3C2400_GPB14_INP    (0x00 << 28)
-#define S3C2400_GPB14_OUTP   (0x01 << 28)
-#define S3C2400_GPB14_DATA30 (0x02 << 28)
-
-#define S3C2400_GPB15        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
-#define S3C2400_GPB15_INP    (0x00 << 30)
-#define S3C2400_GPB15_OUTP   (0x01 << 30)
-#define S3C2400_GPB15_DATA31 (0x02 << 30)
-
-#define S3C2410_GPB_PUPDIS(x)  (1<<(x))
-
-/* Port C consits of 16 GPIO/Special function
- *
- * almost identical setup to port b, but the special functions are mostly
- * to do with the video system's sync/etc.
-*/
-
-#define S3C2410_GPCCON	   S3C2410_GPIOREG(0x20)
-#define S3C2410_GPCDAT	   S3C2410_GPIOREG(0x24)
-#define S3C2410_GPCUP	   S3C2410_GPIOREG(0x28)
-
-#define S3C2400_GPCCON	   S3C2410_GPIOREG(0x14)
-#define S3C2400_GPCDAT	   S3C2410_GPIOREG(0x18)
-#define S3C2400_GPCUP	   S3C2410_GPIOREG(0x1C)
-
-#define S3C2410_GPC0            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
-#define S3C2410_GPC0_INP	(0x00 << 0)
-#define S3C2410_GPC0_OUTP	(0x01 << 0)
-#define S3C2410_GPC0_LEND	(0x02 << 0)
-#define S3C2400_GPC0_VD0 	(0x02 << 0)
-
-#define S3C2410_GPC1            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
-#define S3C2410_GPC1_INP	(0x00 << 2)
-#define S3C2410_GPC1_OUTP	(0x01 << 2)
-#define S3C2410_GPC1_VCLK	(0x02 << 2)
-#define S3C2400_GPC1_VD1 	(0x02 << 2)
-
-#define S3C2410_GPC2            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
-#define S3C2410_GPC2_INP	(0x00 << 4)
-#define S3C2410_GPC2_OUTP	(0x01 << 4)
-#define S3C2410_GPC2_VLINE	(0x02 << 4)
-#define S3C2400_GPC2_VD2  	(0x02 << 4)
-
-#define S3C2410_GPC3            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
-#define S3C2410_GPC3_INP	(0x00 << 6)
-#define S3C2410_GPC3_OUTP	(0x01 << 6)
-#define S3C2410_GPC3_VFRAME	(0x02 << 6)
-#define S3C2400_GPC3_VD3   	(0x02 << 6)
-
-#define S3C2410_GPC4            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
-#define S3C2410_GPC4_INP	(0x00 << 8)
-#define S3C2410_GPC4_OUTP	(0x01 << 8)
-#define S3C2410_GPC4_VM		(0x02 << 8)
-#define S3C2400_GPC4_VD4	(0x02 << 8)
-
-#define S3C2410_GPC5            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
-#define S3C2410_GPC5_INP	(0x00 << 10)
-#define S3C2410_GPC5_OUTP	(0x01 << 10)
-#define S3C2410_GPC5_LCDVF0	(0x02 << 10)
-#define S3C2400_GPC5_VD5   	(0x02 << 10)
-
-#define S3C2410_GPC6            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
-#define S3C2410_GPC6_INP	(0x00 << 12)
-#define S3C2410_GPC6_OUTP	(0x01 << 12)
-#define S3C2410_GPC6_LCDVF1	(0x02 << 12)
-#define S3C2400_GPC6_VD6   	(0x02 << 12)
-
-#define S3C2410_GPC7            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
-#define S3C2410_GPC7_INP	(0x00 << 14)
-#define S3C2410_GPC7_OUTP	(0x01 << 14)
-#define S3C2410_GPC7_LCDVF2	(0x02 << 14)
-#define S3C2400_GPC7_VD7   	(0x02 << 14)
-
-#define S3C2410_GPC8            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
-#define S3C2410_GPC8_INP	(0x00 << 16)
-#define S3C2410_GPC8_OUTP	(0x01 << 16)
-#define S3C2410_GPC8_VD0	(0x02 << 16)
-#define S3C2400_GPC8_VD8	(0x02 << 16)
-
-#define S3C2410_GPC9            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
-#define S3C2410_GPC9_INP	(0x00 << 18)
-#define S3C2410_GPC9_OUTP	(0x01 << 18)
-#define S3C2410_GPC9_VD1	(0x02 << 18)
-#define S3C2400_GPC9_VD9	(0x02 << 18)
-
-#define S3C2410_GPC10           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
-#define S3C2410_GPC10_INP	(0x00 << 20)
-#define S3C2410_GPC10_OUTP	(0x01 << 20)
-#define S3C2410_GPC10_VD2	(0x02 << 20)
-#define S3C2400_GPC10_VD10	(0x02 << 20)
-
-#define S3C2410_GPC11           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
-#define S3C2410_GPC11_INP	(0x00 << 22)
-#define S3C2410_GPC11_OUTP	(0x01 << 22)
-#define S3C2410_GPC11_VD3	(0x02 << 22)
-#define S3C2400_GPC11_VD11	(0x02 << 22)
-
-#define S3C2410_GPC12           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
-#define S3C2410_GPC12_INP	(0x00 << 24)
-#define S3C2410_GPC12_OUTP	(0x01 << 24)
-#define S3C2410_GPC12_VD4	(0x02 << 24)
-#define S3C2400_GPC12_VD12	(0x02 << 24)
-
-#define S3C2410_GPC13           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
-#define S3C2410_GPC13_INP	(0x00 << 26)
-#define S3C2410_GPC13_OUTP	(0x01 << 26)
-#define S3C2410_GPC13_VD5	(0x02 << 26)
-#define S3C2400_GPC13_VD13	(0x02 << 26)
-
-#define S3C2410_GPC14           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
-#define S3C2410_GPC14_INP	(0x00 << 28)
-#define S3C2410_GPC14_OUTP	(0x01 << 28)
-#define S3C2410_GPC14_VD6	(0x02 << 28)
-#define S3C2400_GPC14_VD14	(0x02 << 28)
-
-#define S3C2410_GPC15           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
-#define S3C2410_GPC15_INP	(0x00 << 30)
-#define S3C2410_GPC15_OUTP	(0x01 << 30)
-#define S3C2410_GPC15_VD7	(0x02 << 30)
-#define S3C2400_GPC15_VD15	(0x02 << 30)
-
-#define S3C2410_GPC_PUPDIS(x)  (1<<(x))
-
-/*
- * S3C2410: Port D consists of 16 GPIO/Special function
- *
- * almost identical setup to port b, but the special functions are mostly
- * to do with the video system's data.
- *
- * S3C2400: Port D consists of 11 GPIO/Special function
- *
- * almost identical setup to port c
-*/
-
-#define S3C2410_GPDCON	   S3C2410_GPIOREG(0x30)
-#define S3C2410_GPDDAT	   S3C2410_GPIOREG(0x34)
-#define S3C2410_GPDUP	   S3C2410_GPIOREG(0x38)
-
-#define S3C2400_GPDCON	   S3C2410_GPIOREG(0x20)
-#define S3C2400_GPDDAT	   S3C2410_GPIOREG(0x24)
-#define S3C2400_GPDUP	   S3C2410_GPIOREG(0x28)
-
-#define S3C2410_GPD0            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
-#define S3C2410_GPD0_INP	(0x00 << 0)
-#define S3C2410_GPD0_OUTP	(0x01 << 0)
-#define S3C2410_GPD0_VD8	(0x02 << 0)
-#define S3C2400_GPD0_VFRAME	(0x02 << 0)
-#define S3C2442_GPD0_nSPICS1	(0x03 << 0)
-
-#define S3C2410_GPD1            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
-#define S3C2410_GPD1_INP	(0x00 << 2)
-#define S3C2410_GPD1_OUTP	(0x01 << 2)
-#define S3C2410_GPD1_VD9	(0x02 << 2)
-#define S3C2400_GPD1_VM		(0x02 << 2)
-#define S3C2442_GPD1_SPICLK1	(0x03 << 2)
-
-#define S3C2410_GPD2            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
-#define S3C2410_GPD2_INP	(0x00 << 4)
-#define S3C2410_GPD2_OUTP	(0x01 << 4)
-#define S3C2410_GPD2_VD10	(0x02 << 4)
-#define S3C2400_GPD2_VLINE	(0x02 << 4)
-
-#define S3C2410_GPD3            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
-#define S3C2410_GPD3_INP	(0x00 << 6)
-#define S3C2410_GPD3_OUTP	(0x01 << 6)
-#define S3C2410_GPD3_VD11	(0x02 << 6)
-#define S3C2400_GPD3_VCLK	(0x02 << 6)
-
-#define S3C2410_GPD4            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
-#define S3C2410_GPD4_INP	(0x00 << 8)
-#define S3C2410_GPD4_OUTP	(0x01 << 8)
-#define S3C2410_GPD4_VD12	(0x02 << 8)
-#define S3C2400_GPD4_LEND	(0x02 << 8)
-
-#define S3C2410_GPD5            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
-#define S3C2410_GPD5_INP	(0x00 << 10)
-#define S3C2410_GPD5_OUTP	(0x01 << 10)
-#define S3C2410_GPD5_VD13	(0x02 << 10)
-#define S3C2400_GPD5_TOUT0	(0x02 << 10)
-
-#define S3C2410_GPD6            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
-#define S3C2410_GPD6_INP	(0x00 << 12)
-#define S3C2410_GPD6_OUTP	(0x01 << 12)
-#define S3C2410_GPD6_VD14	(0x02 << 12)
-#define S3C2400_GPD6_TOUT1	(0x02 << 12)
-
-#define S3C2410_GPD7            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
-#define S3C2410_GPD7_INP	(0x00 << 14)
-#define S3C2410_GPD7_OUTP	(0x01 << 14)
-#define S3C2410_GPD7_VD15	(0x02 << 14)
-#define S3C2400_GPD7_TOUT2	(0x02 << 14)
-
-#define S3C2410_GPD8            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
-#define S3C2410_GPD8_INP	(0x00 << 16)
-#define S3C2410_GPD8_OUTP	(0x01 << 16)
-#define S3C2410_GPD8_VD16	(0x02 << 16)
-#define S3C2400_GPD8_TOUT3	(0x02 << 16)
-
-#define S3C2410_GPD9            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
-#define S3C2410_GPD9_INP	(0x00 << 18)
-#define S3C2410_GPD9_OUTP	(0x01 << 18)
-#define S3C2410_GPD9_VD17	(0x02 << 18)
-#define S3C2400_GPD9_TCLK0	(0x02 << 18)
-#define S3C2410_GPD9_MASK       (0x03 << 18)
-
-#define S3C2410_GPD10           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
-#define S3C2410_GPD10_INP	(0x00 << 20)
-#define S3C2410_GPD10_OUTP	(0x01 << 20)
-#define S3C2410_GPD10_VD18	(0x02 << 20)
-#define S3C2400_GPD10_nWAIT	(0x02 << 20)
-
-#define S3C2410_GPD11           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
-#define S3C2410_GPD11_INP	(0x00 << 22)
-#define S3C2410_GPD11_OUTP	(0x01 << 22)
-#define S3C2410_GPD11_VD19	(0x02 << 22)
-
-#define S3C2410_GPD12           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
-#define S3C2410_GPD12_INP	(0x00 << 24)
-#define S3C2410_GPD12_OUTP	(0x01 << 24)
-#define S3C2410_GPD12_VD20	(0x02 << 24)
-
-#define S3C2410_GPD13           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
-#define S3C2410_GPD13_INP	(0x00 << 26)
-#define S3C2410_GPD13_OUTP	(0x01 << 26)
-#define S3C2410_GPD13_VD21	(0x02 << 26)
-
-#define S3C2410_GPD14           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
-#define S3C2410_GPD14_INP	(0x00 << 28)
-#define S3C2410_GPD14_OUTP	(0x01 << 28)
-#define S3C2410_GPD14_VD22	(0x02 << 28)
-#define S3C2410_GPD14_nSS1	(0x03 << 28)
-
-#define S3C2410_GPD15           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
-#define S3C2410_GPD15_INP	(0x00 << 30)
-#define S3C2410_GPD15_OUTP	(0x01 << 30)
-#define S3C2410_GPD15_VD23	(0x02 << 30)
-#define S3C2410_GPD15_nSS0	(0x03 << 30)
-
-#define S3C2410_GPD_PUPDIS(x)  (1<<(x))
-
-/* S3C2410:
- * Port E consists of 16 GPIO/Special function
- *
- * again, the same as port B, but dealing with I2S, SDI, and
- * more miscellaneous functions
- *
- * S3C2400:
- * Port E consists of 12 GPIO/Special function
- *
- * GPIO / interrupt inputs
-*/
-
-#define S3C2410_GPECON	   S3C2410_GPIOREG(0x40)
-#define S3C2410_GPEDAT	   S3C2410_GPIOREG(0x44)
-#define S3C2410_GPEUP	   S3C2410_GPIOREG(0x48)
-
-#define S3C2400_GPECON	   S3C2410_GPIOREG(0x2C)
-#define S3C2400_GPEDAT	   S3C2410_GPIOREG(0x30)
-#define S3C2400_GPEUP	   S3C2410_GPIOREG(0x34)
-
-#define S3C2410_GPE0           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
-#define S3C2410_GPE0_INP       (0x00 << 0)
-#define S3C2410_GPE0_OUTP      (0x01 << 0)
-#define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
-#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
-#define S3C2400_GPE0_EINT0     (0x02 << 0)
-#define S3C2410_GPE0_MASK      (0x03 << 0)
-
-#define S3C2410_GPE1           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
-#define S3C2410_GPE1_INP       (0x00 << 2)
-#define S3C2410_GPE1_OUTP      (0x01 << 2)
-#define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
-#define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
-#define S3C2400_GPE1_EINT1     (0x02 << 2)
-#define S3C2400_GPE1_nSS       (0x03 << 2)
-#define S3C2410_GPE1_MASK      (0x03 << 2)
-
-#define S3C2410_GPE2           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
-#define S3C2410_GPE2_INP       (0x00 << 4)
-#define S3C2410_GPE2_OUTP      (0x01 << 4)
-#define S3C2410_GPE2_CDCLK     (0x02 << 4)
-#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
-#define S3C2400_GPE2_EINT2     (0x02 << 4)
-#define S3C2400_GPE2_I2SSDI    (0x03 << 4)
-
-#define S3C2410_GPE3           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
-#define S3C2410_GPE3_INP       (0x00 << 6)
-#define S3C2410_GPE3_OUTP      (0x01 << 6)
-#define S3C2410_GPE3_I2SSDI    (0x02 << 6)
-#define S3C2443_GPE3_AC_SDI    (0x03 << 6)
-#define S3C2400_GPE3_EINT3     (0x02 << 6)
-#define S3C2400_GPE3_nCTS1     (0x03 << 6)
-#define S3C2410_GPE3_nSS0      (0x03 << 6)
-#define S3C2410_GPE3_MASK      (0x03 << 6)
-
-#define S3C2410_GPE4           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
-#define S3C2410_GPE4_INP       (0x00 << 8)
-#define S3C2410_GPE4_OUTP      (0x01 << 8)
-#define S3C2410_GPE4_I2SSDO    (0x02 << 8)
-#define S3C2443_GPE4_AC_SDO    (0x03 << 8)
-#define S3C2400_GPE4_EINT4     (0x02 << 8)
-#define S3C2400_GPE4_nRTS1     (0x03 << 8)
-#define S3C2410_GPE4_I2SSDI    (0x03 << 8)
-#define S3C2410_GPE4_MASK      (0x03 << 8)
-
-#define S3C2410_GPE5           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
-#define S3C2410_GPE5_INP       (0x00 << 10)
-#define S3C2410_GPE5_OUTP      (0x01 << 10)
-#define S3C2410_GPE5_SDCLK     (0x02 << 10)
-#define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
-#define S3C2400_GPE5_EINT5     (0x02 << 10)
-#define S3C2400_GPE5_TCLK1     (0x03 << 10)
-
-#define S3C2410_GPE6           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
-#define S3C2410_GPE6_INP       (0x00 << 12)
-#define S3C2410_GPE6_OUTP      (0x01 << 12)
-#define S3C2410_GPE6_SDCMD     (0x02 << 12)
-#define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
-#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
-#define S3C2400_GPE6_EINT6     (0x02 << 12)
-
-#define S3C2410_GPE7           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
-#define S3C2410_GPE7_INP       (0x00 << 14)
-#define S3C2410_GPE7_OUTP      (0x01 << 14)
-#define S3C2410_GPE7_SDDAT0    (0x02 << 14)
-#define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
-#define S3C2443_GPE7_AC_SDI    (0x03 << 14)
-#define S3C2400_GPE7_EINT7     (0x02 << 14)
-
-#define S3C2410_GPE8           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
-#define S3C2410_GPE8_INP       (0x00 << 16)
-#define S3C2410_GPE8_OUTP      (0x01 << 16)
-#define S3C2410_GPE8_SDDAT1    (0x02 << 16)
-#define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
-#define S3C2443_GPE8_AC_SDO    (0x03 << 16)
-#define S3C2400_GPE8_nXDACK0   (0x02 << 16)
-
-#define S3C2410_GPE9           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
-#define S3C2410_GPE9_INP       (0x00 << 18)
-#define S3C2410_GPE9_OUTP      (0x01 << 18)
-#define S3C2410_GPE9_SDDAT2    (0x02 << 18)
-#define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
-#define S3C2443_GPE9_AC_SYNC   (0x03 << 18)
-#define S3C2400_GPE9_nXDACK1   (0x02 << 18)
-#define S3C2400_GPE9_nXBACK    (0x03 << 18)
-
-#define S3C2410_GPE10          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
-#define S3C2410_GPE10_INP      (0x00 << 20)
-#define S3C2410_GPE10_OUTP     (0x01 << 20)
-#define S3C2410_GPE10_SDDAT3   (0x02 << 20)
-#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
-#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
-#define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
-
-#define S3C2410_GPE11          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
-#define S3C2410_GPE11_INP      (0x00 << 22)
-#define S3C2410_GPE11_OUTP     (0x01 << 22)
-#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
-#define S3C2400_GPE11_nXDREQ1  (0x02 << 22)
-#define S3C2400_GPE11_nXBREQ   (0x03 << 22)
-
-#define S3C2410_GPE12          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
-#define S3C2410_GPE12_INP      (0x00 << 24)
-#define S3C2410_GPE12_OUTP     (0x01 << 24)
-#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
-
-#define S3C2410_GPE13          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
-#define S3C2410_GPE13_INP      (0x00 << 26)
-#define S3C2410_GPE13_OUTP     (0x01 << 26)
-#define S3C2410_GPE13_SPICLK0  (0x02 << 26)
-
-#define S3C2410_GPE14          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
-#define S3C2410_GPE14_INP      (0x00 << 28)
-#define S3C2410_GPE14_OUTP     (0x01 << 28)
-#define S3C2410_GPE14_IICSCL   (0x02 << 28)
-#define S3C2410_GPE14_MASK     (0x03 << 28)
-
-#define S3C2410_GPE15          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
-#define S3C2410_GPE15_INP      (0x00 << 30)
-#define S3C2410_GPE15_OUTP     (0x01 << 30)
-#define S3C2410_GPE15_IICSDA   (0x02 << 30)
-#define S3C2410_GPE15_MASK     (0x03 << 30)
-
-#define S3C2440_GPE0_ACSYNC    (0x03 << 0)
-#define S3C2440_GPE1_ACBITCLK  (0x03 << 2)
-#define S3C2440_GPE2_ACRESET   (0x03 << 4)
-#define S3C2440_GPE3_ACIN      (0x03 << 6)
-#define S3C2440_GPE4_ACOUT     (0x03 << 8)
-
-#define S3C2410_GPE_PUPDIS(x)  (1<<(x))
-
-/* S3C2410:
- * Port F consists of 8 GPIO/Special function
- *
- * GPIO / interrupt inputs
- *
- * GPFCON has 2 bits for each of the input pins on port F
- *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
- *
- * pull up works like all other ports.
- *
- * S3C2400:
- * Port F consists of 7 GPIO/Special function
- *
- * GPIO/serial/misc pins
-*/
-
-#define S3C2410_GPFCON	   S3C2410_GPIOREG(0x50)
-#define S3C2410_GPFDAT	   S3C2410_GPIOREG(0x54)
-#define S3C2410_GPFUP	   S3C2410_GPIOREG(0x58)
-
-#define S3C2400_GPFCON	   S3C2410_GPIOREG(0x38)
-#define S3C2400_GPFDAT	   S3C2410_GPIOREG(0x3C)
-#define S3C2400_GPFUP	   S3C2410_GPIOREG(0x40)
-
-#define S3C2410_GPF0        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
-#define S3C2410_GPF0_INP    (0x00 << 0)
-#define S3C2410_GPF0_OUTP   (0x01 << 0)
-#define S3C2410_GPF0_EINT0  (0x02 << 0)
-#define S3C2400_GPF0_RXD0   (0x02 << 0)
-
-#define S3C2410_GPF1        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
-#define S3C2410_GPF1_INP    (0x00 << 2)
-#define S3C2410_GPF1_OUTP   (0x01 << 2)
-#define S3C2410_GPF1_EINT1  (0x02 << 2)
-#define S3C2400_GPF1_RXD1   (0x02 << 2)
-#define S3C2400_GPF1_IICSDA (0x03 << 2)
-
-#define S3C2410_GPF2        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
-#define S3C2410_GPF2_INP    (0x00 << 4)
-#define S3C2410_GPF2_OUTP   (0x01 << 4)
-#define S3C2410_GPF2_EINT2  (0x02 << 4)
-#define S3C2400_GPF2_TXD0   (0x02 << 4)
-
-#define S3C2410_GPF3        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
-#define S3C2410_GPF3_INP    (0x00 << 6)
-#define S3C2410_GPF3_OUTP   (0x01 << 6)
-#define S3C2410_GPF3_EINT3  (0x02 << 6)
-#define S3C2400_GPF3_TXD1   (0x02 << 6)
-#define S3C2400_GPF3_IICSCL (0x03 << 6)
-
-#define S3C2410_GPF4        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
-#define S3C2410_GPF4_INP    (0x00 << 8)
-#define S3C2410_GPF4_OUTP   (0x01 << 8)
-#define S3C2410_GPF4_EINT4  (0x02 << 8)
-#define S3C2400_GPF4_nRTS0  (0x02 << 8)
-#define S3C2400_GPF4_nXBACK (0x03 << 8)
-
-#define S3C2410_GPF5        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
-#define S3C2410_GPF5_INP    (0x00 << 10)
-#define S3C2410_GPF5_OUTP   (0x01 << 10)
-#define S3C2410_GPF5_EINT5  (0x02 << 10)
-#define S3C2400_GPF5_nCTS0  (0x02 << 10)
-#define S3C2400_GPF5_nXBREQ (0x03 << 10)
-
-#define S3C2410_GPF6        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
-#define S3C2410_GPF6_INP    (0x00 << 12)
-#define S3C2410_GPF6_OUTP   (0x01 << 12)
-#define S3C2410_GPF6_EINT6  (0x02 << 12)
-#define S3C2400_GPF6_CLKOUT (0x02 << 12)
-
-#define S3C2410_GPF7        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
-#define S3C2410_GPF7_INP    (0x00 << 14)
-#define S3C2410_GPF7_OUTP   (0x01 << 14)
-#define S3C2410_GPF7_EINT7  (0x02 << 14)
-
-#define S3C2410_GPF_PUPDIS(x)  (1<<(x))
-
-/* S3C2410:
- * Port G consists of 8 GPIO/IRQ/Special function
- *
- * GPGCON has 2 bits for each of the input pins on port F
- *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
- *
- * pull up works like all other ports.
- *
- * S3C2400:
- * Port G consists of 10 GPIO/Special function
-*/
-
-#define S3C2410_GPGCON	   S3C2410_GPIOREG(0x60)
-#define S3C2410_GPGDAT	   S3C2410_GPIOREG(0x64)
-#define S3C2410_GPGUP	   S3C2410_GPIOREG(0x68)
-
-#define S3C2400_GPGCON	   S3C2410_GPIOREG(0x44)
-#define S3C2400_GPGDAT	   S3C2410_GPIOREG(0x48)
-#define S3C2400_GPGUP	   S3C2410_GPIOREG(0x4C)
-
-#define S3C2410_GPG0          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
-#define S3C2410_GPG0_INP      (0x00 << 0)
-#define S3C2410_GPG0_OUTP     (0x01 << 0)
-#define S3C2410_GPG0_EINT8    (0x02 << 0)
-#define S3C2400_GPG0_I2SLRCK  (0x02 << 0)
-
-#define S3C2410_GPG1          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
-#define S3C2410_GPG1_INP      (0x00 << 2)
-#define S3C2410_GPG1_OUTP     (0x01 << 2)
-#define S3C2410_GPG1_EINT9    (0x02 << 2)
-#define S3C2400_GPG1_I2SSCLK  (0x02 << 2)
-
-#define S3C2410_GPG2          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
-#define S3C2410_GPG2_INP      (0x00 << 4)
-#define S3C2410_GPG2_OUTP     (0x01 << 4)
-#define S3C2410_GPG2_EINT10   (0x02 << 4)
-#define S3C2410_GPG2_nSS0     (0x03 << 4)
-#define S3C2400_GPG2_CDCLK    (0x02 << 4)
-
-#define S3C2410_GPG3          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
-#define S3C2410_GPG3_INP      (0x00 << 6)
-#define S3C2410_GPG3_OUTP     (0x01 << 6)
-#define S3C2410_GPG3_EINT11   (0x02 << 6)
-#define S3C2410_GPG3_nSS1     (0x03 << 6)
-#define S3C2400_GPG3_I2SSDO   (0x02 << 6)
-#define S3C2400_GPG3_I2SSDI   (0x03 << 6)
-
-#define S3C2410_GPG4          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
-#define S3C2410_GPG4_INP      (0x00 << 8)
-#define S3C2410_GPG4_OUTP     (0x01 << 8)
-#define S3C2410_GPG4_EINT12   (0x02 << 8)
-#define S3C2400_GPG4_MMCCLK   (0x02 << 8)
-#define S3C2400_GPG4_I2SSDI   (0x03 << 8)
-#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
-#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
-
-#define S3C2410_GPG5          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
-#define S3C2410_GPG5_INP      (0x00 << 10)
-#define S3C2410_GPG5_OUTP     (0x01 << 10)
-#define S3C2410_GPG5_EINT13   (0x02 << 10)
-#define S3C2400_GPG5_MMCCMD   (0x02 << 10)
-#define S3C2400_GPG5_IICSDA   (0x03 << 10)
-#define S3C2410_GPG5_SPIMISO1 (0x03 << 10)	/* not s3c2443 */
-
-#define S3C2410_GPG6          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
-#define S3C2410_GPG6_INP      (0x00 << 12)
-#define S3C2410_GPG6_OUTP     (0x01 << 12)
-#define S3C2410_GPG6_EINT14   (0x02 << 12)
-#define S3C2400_GPG6_MMCDAT   (0x02 << 12)
-#define S3C2400_GPG6_IICSCL   (0x03 << 12)
-#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
-
-#define S3C2410_GPG7          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
-#define S3C2410_GPG7_INP      (0x00 << 14)
-#define S3C2410_GPG7_OUTP     (0x01 << 14)
-#define S3C2410_GPG7_EINT15   (0x02 << 14)
-#define S3C2410_GPG7_SPICLK1  (0x03 << 14)
-#define S3C2400_GPG7_SPIMISO  (0x02 << 14)
-#define S3C2400_GPG7_IICSDA   (0x03 << 14)
-
-#define S3C2410_GPG8          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
-#define S3C2410_GPG8_INP      (0x00 << 16)
-#define S3C2410_GPG8_OUTP     (0x01 << 16)
-#define S3C2410_GPG8_EINT16   (0x02 << 16)
-#define S3C2400_GPG8_SPIMOSI  (0x02 << 16)
-#define S3C2400_GPG8_IICSCL   (0x03 << 16)
-
-#define S3C2410_GPG9          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
-#define S3C2410_GPG9_INP      (0x00 << 18)
-#define S3C2410_GPG9_OUTP     (0x01 << 18)
-#define S3C2410_GPG9_EINT17   (0x02 << 18)
-#define S3C2400_GPG9_SPICLK   (0x02 << 18)
-#define S3C2400_GPG9_MMCCLK   (0x03 << 18)
-
-#define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
-#define S3C2410_GPG10_INP     (0x00 << 20)
-#define S3C2410_GPG10_OUTP    (0x01 << 20)
-#define S3C2410_GPG10_EINT18  (0x02 << 20)
-
-#define S3C2410_GPG11         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
-#define S3C2410_GPG11_INP     (0x00 << 22)
-#define S3C2410_GPG11_OUTP    (0x01 << 22)
-#define S3C2410_GPG11_EINT19  (0x02 << 22)
-#define S3C2410_GPG11_TCLK1   (0x03 << 22)
-#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
-
-#define S3C2410_GPG12         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
-#define S3C2410_GPG12_INP     (0x00 << 24)
-#define S3C2410_GPG12_OUTP    (0x01 << 24)
-#define S3C2410_GPG12_EINT20  (0x02 << 24)
-#define S3C2410_GPG12_XMON    (0x03 << 24)
-#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
-#define S3C2443_GPG12_nINPACK (0x03 << 24)
-
-#define S3C2410_GPG13         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
-#define S3C2410_GPG13_INP     (0x00 << 26)
-#define S3C2410_GPG13_OUTP    (0x01 << 26)
-#define S3C2410_GPG13_EINT21  (0x02 << 26)
-#define S3C2410_GPG13_nXPON   (0x03 << 26)
-#define S3C2443_GPG13_CF_nREG (0x03 << 26)
-
-#define S3C2410_GPG14         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
-#define S3C2410_GPG14_INP     (0x00 << 28)
-#define S3C2410_GPG14_OUTP    (0x01 << 28)
-#define S3C2410_GPG14_EINT22  (0x02 << 28)
-#define S3C2410_GPG14_YMON    (0x03 << 28)
-#define S3C2443_GPG14_CF_RESET (0x03 << 28)
-
-#define S3C2410_GPG15         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
-#define S3C2410_GPG15_INP     (0x00 << 30)
-#define S3C2410_GPG15_OUTP    (0x01 << 30)
-#define S3C2410_GPG15_EINT23  (0x02 << 30)
-#define S3C2410_GPG15_nYPON   (0x03 << 30)
-#define S3C2443_GPG15_CF_PWR  (0x03 << 30)
-
-#define S3C2410_GPG_PUPDIS(x)  (1<<(x))
-
-/* Port H consists of11 GPIO/serial/Misc pins
- *
- * GPGCON has 2 bits for each of the input pins on port F
- *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
- *
- * pull up works like all other ports.
-*/
-
-#define S3C2410_GPHCON	   S3C2410_GPIOREG(0x70)
-#define S3C2410_GPHDAT	   S3C2410_GPIOREG(0x74)
-#define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
-
-#define S3C2410_GPH0        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
-#define S3C2410_GPH0_INP    (0x00 << 0)
-#define S3C2410_GPH0_OUTP   (0x01 << 0)
-#define S3C2410_GPH0_nCTS0  (0x02 << 0)
-
-#define S3C2410_GPH1        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
-#define S3C2410_GPH1_INP    (0x00 << 2)
-#define S3C2410_GPH1_OUTP   (0x01 << 2)
-#define S3C2410_GPH1_nRTS0  (0x02 << 2)
-
-#define S3C2410_GPH2        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
-#define S3C2410_GPH2_INP    (0x00 << 4)
-#define S3C2410_GPH2_OUTP   (0x01 << 4)
-#define S3C2410_GPH2_TXD0   (0x02 << 4)
-
-#define S3C2410_GPH3        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
-#define S3C2410_GPH3_INP    (0x00 << 6)
-#define S3C2410_GPH3_OUTP   (0x01 << 6)
-#define S3C2410_GPH3_RXD0   (0x02 << 6)
-
-#define S3C2410_GPH4        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
-#define S3C2410_GPH4_INP    (0x00 << 8)
-#define S3C2410_GPH4_OUTP   (0x01 << 8)
-#define S3C2410_GPH4_TXD1   (0x02 << 8)
-
-#define S3C2410_GPH5        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
-#define S3C2410_GPH5_INP    (0x00 << 10)
-#define S3C2410_GPH5_OUTP   (0x01 << 10)
-#define S3C2410_GPH5_RXD1   (0x02 << 10)
-
-#define S3C2410_GPH6        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
-#define S3C2410_GPH6_INP    (0x00 << 12)
-#define S3C2410_GPH6_OUTP   (0x01 << 12)
-#define S3C2410_GPH6_TXD2   (0x02 << 12)
-#define S3C2410_GPH6_nRTS1  (0x03 << 12)
-
-#define S3C2410_GPH7        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
-#define S3C2410_GPH7_INP    (0x00 << 14)
-#define S3C2410_GPH7_OUTP   (0x01 << 14)
-#define S3C2410_GPH7_RXD2   (0x02 << 14)
-#define S3C2410_GPH7_nCTS1  (0x03 << 14)
-
-#define S3C2410_GPH8        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
-#define S3C2410_GPH8_INP    (0x00 << 16)
-#define S3C2410_GPH8_OUTP   (0x01 << 16)
-#define S3C2410_GPH8_UCLK   (0x02 << 16)
-
-#define S3C2410_GPH9          S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
-#define S3C2410_GPH9_INP      (0x00 << 18)
-#define S3C2410_GPH9_OUTP     (0x01 << 18)
-#define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
-#define S3C2442_GPH9_nSPICS0  (0x03 << 18)
-
-#define S3C2410_GPH10         S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
-#define S3C2410_GPH10_INP     (0x00 << 20)
-#define S3C2410_GPH10_OUTP    (0x01 << 20)
-#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
-
-/* The S3C2412 and S3C2413 move the GPJ register set to after
- * GPH, which means all registers after 0x80 are now offset by 0x10
- * for the 2412/2413 from the 2410/2440/2442
-*/
-
-/* miscellaneous control */
-#define S3C2400_MISCCR	   S3C2410_GPIOREG(0x54)
-#define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
-#define S3C2410_DCLKCON	   S3C2410_GPIOREG(0x84)
-
-#define S3C24XX_DCLKCON	   S3C24XX_GPIOREG2(0x84)
-
-/* see clock.h for dclk definitions */
-
-/* pullup control on databus */
-#define S3C2410_MISCCR_SPUCR_HEN    (0<<0)
-#define S3C2410_MISCCR_SPUCR_HDIS   (1<<0)
-#define S3C2410_MISCCR_SPUCR_LEN    (0<<1)
-#define S3C2410_MISCCR_SPUCR_LDIS   (1<<1)
-
-#define S3C2400_MISCCR_SPUCR_LEN    (0<<0)
-#define S3C2400_MISCCR_SPUCR_LDIS   (1<<0)
-#define S3C2400_MISCCR_SPUCR_HEN    (0<<1)
-#define S3C2400_MISCCR_SPUCR_HDIS   (1<<1)
-
-#define S3C2400_MISCCR_HZ_STOPEN    (0<<2)
-#define S3C2400_MISCCR_HZ_STOPPREV  (1<<2)
-
-#define S3C2410_MISCCR_USBDEV	    (0<<3)
-#define S3C2410_MISCCR_USBHOST	    (1<<3)
-
-#define S3C2410_MISCCR_CLK0_MPLL    (0<<4)
-#define S3C2410_MISCCR_CLK0_UPLL    (1<<4)
-#define S3C2410_MISCCR_CLK0_FCLK    (2<<4)
-#define S3C2410_MISCCR_CLK0_HCLK    (3<<4)
-#define S3C2410_MISCCR_CLK0_PCLK    (4<<4)
-#define S3C2410_MISCCR_CLK0_DCLK0   (5<<4)
-#define S3C2410_MISCCR_CLK0_MASK    (7<<4)
-
-#define S3C2412_MISCCR_CLK0_RTC	    (2<<4)
-
-#define S3C2410_MISCCR_CLK1_MPLL    (0<<8)
-#define S3C2410_MISCCR_CLK1_UPLL    (1<<8)
-#define S3C2410_MISCCR_CLK1_FCLK    (2<<8)
-#define S3C2410_MISCCR_CLK1_HCLK    (3<<8)
-#define S3C2410_MISCCR_CLK1_PCLK    (4<<8)
-#define S3C2410_MISCCR_CLK1_DCLK1   (5<<8)
-#define S3C2410_MISCCR_CLK1_MASK    (7<<8)
-
-#define S3C2412_MISCCR_CLK1_CLKsrc  (0<<8)
-
-#define S3C2410_MISCCR_USBSUSPND0   (1<<12)
-#define S3C2410_MISCCR_USBSUSPND1   (1<<13)
-
-#define S3C2410_MISCCR_nRSTCON	    (1<<16)
-
-#define S3C2410_MISCCR_nEN_SCLK0    (1<<17)
-#define S3C2410_MISCCR_nEN_SCLK1    (1<<18)
-#define S3C2410_MISCCR_nEN_SCLKE    (1<<19)	/* not 2412 */
-#define S3C2410_MISCCR_SDSLEEP	    (7<<17)
-
-/* external interrupt control... */
-/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
- * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
- * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23
- *
- * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23
- *
- * Samsung datasheet p9-25
-*/
-#define S3C2400_EXTINT0    S3C2410_GPIOREG(0x58)
-#define S3C2410_EXTINT0	   S3C2410_GPIOREG(0x88)
-#define S3C2410_EXTINT1	   S3C2410_GPIOREG(0x8C)
-#define S3C2410_EXTINT2	   S3C2410_GPIOREG(0x90)
-
-#define S3C24XX_EXTINT0	   S3C24XX_GPIOREG2(0x88)
-#define S3C24XX_EXTINT1	   S3C24XX_GPIOREG2(0x8C)
-#define S3C24XX_EXTINT2	   S3C24XX_GPIOREG2(0x90)
-
-/* values for S3C2410_EXTINT0/1/2 */
-#define S3C2410_EXTINT_LOWLEV	 (0x00)
-#define S3C2410_EXTINT_HILEV	 (0x01)
-#define S3C2410_EXTINT_FALLEDGE	 (0x02)
-#define S3C2410_EXTINT_RISEEDGE	 (0x04)
-#define S3C2410_EXTINT_BOTHEDGE	 (0x06)
-
-/* interrupt filtering conrrol for EINT16..EINT23 */
-#define S3C2410_EINFLT0	   S3C2410_GPIOREG(0x94)
-#define S3C2410_EINFLT1	   S3C2410_GPIOREG(0x98)
-#define S3C2410_EINFLT2	   S3C2410_GPIOREG(0x9C)
-#define S3C2410_EINFLT3	   S3C2410_GPIOREG(0xA0)
-
-#define S3C24XX_EINFLT0	   S3C24XX_GPIOREG2(0x94)
-#define S3C24XX_EINFLT1	   S3C24XX_GPIOREG2(0x98)
-#define S3C24XX_EINFLT2	   S3C24XX_GPIOREG2(0x9C)
-#define S3C24XX_EINFLT3	   S3C24XX_GPIOREG2(0xA0)
-
-/* values for interrupt filtering */
-#define S3C2410_EINTFLT_PCLK		(0x00)
-#define S3C2410_EINTFLT_EXTCLK		(1<<7)
-#define S3C2410_EINTFLT_WIDTHMSK(x)	((x) & 0x3f)
-
-/* removed EINTxxxx defs from here, not meant for this */
-
-/* GSTATUS have miscellaneous information in them
- *
- * These move between s3c2410 and s3c2412 style systems.
- */
-
-#define S3C2410_GSTATUS0   S3C2410_GPIOREG(0x0AC)
-#define S3C2410_GSTATUS1   S3C2410_GPIOREG(0x0B0)
-#define S3C2410_GSTATUS2   S3C2410_GPIOREG(0x0B4)
-#define S3C2410_GSTATUS3   S3C2410_GPIOREG(0x0B8)
-#define S3C2410_GSTATUS4   S3C2410_GPIOREG(0x0BC)
-
-#define S3C2412_GSTATUS0   S3C2410_GPIOREG(0x0BC)
-#define S3C2412_GSTATUS1   S3C2410_GPIOREG(0x0C0)
-#define S3C2412_GSTATUS2   S3C2410_GPIOREG(0x0C4)
-#define S3C2412_GSTATUS3   S3C2410_GPIOREG(0x0C8)
-#define S3C2412_GSTATUS4   S3C2410_GPIOREG(0x0CC)
-
-#define S3C24XX_GSTATUS0   S3C24XX_GPIOREG2(0x0AC)
-#define S3C24XX_GSTATUS1   S3C24XX_GPIOREG2(0x0B0)
-#define S3C24XX_GSTATUS2   S3C24XX_GPIOREG2(0x0B4)
-#define S3C24XX_GSTATUS3   S3C24XX_GPIOREG2(0x0B8)
-#define S3C24XX_GSTATUS4   S3C24XX_GPIOREG2(0x0BC)
-
-#define S3C2410_GSTATUS0_nWAIT	   (1<<3)
-#define S3C2410_GSTATUS0_NCON	   (1<<2)
-#define S3C2410_GSTATUS0_RnB	   (1<<1)
-#define S3C2410_GSTATUS0_nBATTFLT  (1<<0)
-
-#define S3C2410_GSTATUS1_IDMASK	   (0xffff0000)
-#define S3C2410_GSTATUS1_2410	   (0x32410000)
-#define S3C2410_GSTATUS1_2412	   (0x32412001)
-#define S3C2410_GSTATUS1_2440	   (0x32440000)
-#define S3C2410_GSTATUS1_2442	   (0x32440aaa)
-
-#define S3C2410_GSTATUS2_WTRESET   (1<<2)
-#define S3C2410_GSTATUS2_OFFRESET  (1<<1)
-#define S3C2410_GSTATUS2_PONRESET  (1<<0)
-
-/* open drain control register */
-#define S3C2400_OPENCR     S3C2410_GPIOREG(0x50)
-
-#define S3C2400_OPENCR_OPC_RXD1DIS  (0<<0)
-#define S3C2400_OPENCR_OPC_RXD1EN   (1<<0)
-#define S3C2400_OPENCR_OPC_TXD1DIS  (0<<1)
-#define S3C2400_OPENCR_OPC_TXD1EN   (1<<1)
-#define S3C2400_OPENCR_OPC_CMDDIS   (0<<2)
-#define S3C2400_OPENCR_OPC_CMDEN    (1<<2)
-#define S3C2400_OPENCR_OPC_DATDIS   (0<<3)
-#define S3C2400_OPENCR_OPC_DATEN    (1<<3)
-#define S3C2400_OPENCR_OPC_MISODIS  (0<<4)
-#define S3C2400_OPENCR_OPC_MISOEN   (1<<4)
-#define S3C2400_OPENCR_OPC_MOSIDIS  (0<<5)
-#define S3C2400_OPENCR_OPC_MOSIEN   (1<<5)
-
-/* 2412/2413 sleep configuration registers */
-
-#define S3C2412_GPBSLPCON	S3C2410_GPIOREG(0x1C)
-#define S3C2412_GPCSLPCON	S3C2410_GPIOREG(0x2C)
-#define S3C2412_GPDSLPCON	S3C2410_GPIOREG(0x3C)
-#define S3C2412_GPFSLPCON	S3C2410_GPIOREG(0x5C)
-#define S3C2412_GPGSLPCON	S3C2410_GPIOREG(0x6C)
-#define S3C2412_GPHSLPCON	S3C2410_GPIOREG(0x7C)
-
-/* definitions for each pin bit */
-#define S3C2412_GPIO_SLPCON_LOW	 ( 0x00 )
-#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 )
-#define S3C2412_GPIO_SLPCON_IN   ( 0x02 )
-#define S3C2412_GPIO_SLPCON_PULL ( 0x03 )
-
-#define S3C2412_SLPCON_LOW(x)	( 0x00 << ((x) * 2))
-#define S3C2412_SLPCON_HIGH(x)	( 0x01 << ((x) * 2))
-#define S3C2412_SLPCON_IN(x)	( 0x02 << ((x) * 2))
-#define S3C2412_SLPCON_PULL(x)	( 0x03 << ((x) * 2))
-#define S3C2412_SLPCON_EINT(x)	( 0x02 << ((x) * 2))  /* only IRQ pins */
-#define S3C2412_SLPCON_MASK(x)	( 0x03 << ((x) * 2))
-
-#define S3C2412_SLPCON_ALL_LOW	(0x0)
-#define S3C2412_SLPCON_ALL_HIGH	(0x11111111 | 0x44444444)
-#define S3C2412_SLPCON_ALL_IN  	(0x22222222 | 0x88888888)
-#define S3C2412_SLPCON_ALL_PULL	(0x33333333)
-
-#endif	/* __ASM_ARCH_REGS_GPIO_H */
-
diff --git a/include/asm-arm/arch-s3c2410/regs-gpioj.h b/include/asm-arm/arch-s3c2410/regs-gpioj.h
deleted file mode 100644
index 0362332..0000000
--- a/include/asm-arm/arch-s3c2410/regs-gpioj.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-gpioj.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2440 GPIO J register definitions
-*/
-
-
-#ifndef __ASM_ARCH_REGS_GPIOJ_H
-#define __ASM_ARCH_REGS_GPIOJ_H "gpioj"
-
-/* Port J consists of 13 GPIO/Camera pins
- *
- * GPJCON has 2 bits for each of the input pins on port F
- *   00 = 0 input, 1 output, 2 Camera
- *
- * pull up works like all other ports.
-*/
-
-#define S3C2440_GPIO_BANKJ  (416)
-
-#define S3C2440_GPJCON	    S3C2410_GPIOREG(0xd0)
-#define S3C2440_GPJDAT	    S3C2410_GPIOREG(0xd4)
-#define S3C2440_GPJUP	    S3C2410_GPIOREG(0xd8)
-
-#define S3C2413_GPJCON		S3C2410_GPIOREG(0x80)
-#define S3C2413_GPJDAT		S3C2410_GPIOREG(0x84)
-#define S3C2413_GPJUP		S3C2410_GPIOREG(0x88)
-#define S3C2413_GPJSLPCON	S3C2410_GPIOREG(0x8C)
-
-#define S3C2440_GPJ0            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0)
-#define S3C2440_GPJ0_INP        (0x00 << 0)
-#define S3C2440_GPJ0_OUTP       (0x01 << 0)
-#define S3C2440_GPJ0_CAMDATA0   (0x02 << 0)
-
-#define S3C2440_GPJ1            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 1)
-#define S3C2440_GPJ1_INP        (0x00 << 2)
-#define S3C2440_GPJ1_OUTP       (0x01 << 2)
-#define S3C2440_GPJ1_CAMDATA1   (0x02 << 2)
-
-#define S3C2440_GPJ2            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 2)
-#define S3C2440_GPJ2_INP        (0x00 << 4)
-#define S3C2440_GPJ2_OUTP       (0x01 << 4)
-#define S3C2440_GPJ2_CAMDATA2   (0x02 << 4)
-
-#define S3C2440_GPJ3            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 3)
-#define S3C2440_GPJ3_INP        (0x00 << 6)
-#define S3C2440_GPJ3_OUTP       (0x01 << 6)
-#define S3C2440_GPJ3_CAMDATA3   (0x02 << 6)
-
-#define S3C2440_GPJ4            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 4)
-#define S3C2440_GPJ4_INP        (0x00 << 8)
-#define S3C2440_GPJ4_OUTP       (0x01 << 8)
-#define S3C2440_GPJ4_CAMDATA4   (0x02 << 8)
-
-#define S3C2440_GPJ5            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 5)
-#define S3C2440_GPJ5_INP        (0x00 << 10)
-#define S3C2440_GPJ5_OUTP       (0x01 << 10)
-#define S3C2440_GPJ5_CAMDATA5   (0x02 << 10)
-
-#define S3C2440_GPJ6            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 6)
-#define S3C2440_GPJ6_INP        (0x00 << 12)
-#define S3C2440_GPJ6_OUTP       (0x01 << 12)
-#define S3C2440_GPJ6_CAMDATA6   (0x02 << 12)
-
-#define S3C2440_GPJ7            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 7)
-#define S3C2440_GPJ7_INP        (0x00 << 14)
-#define S3C2440_GPJ7_OUTP       (0x01 << 14)
-#define S3C2440_GPJ7_CAMDATA7   (0x02 << 14)
-
-#define S3C2440_GPJ8            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 8)
-#define S3C2440_GPJ8_INP        (0x00 << 16)
-#define S3C2440_GPJ8_OUTP       (0x01 << 16)
-#define S3C2440_GPJ8_CAMPCLK    (0x02 << 16)
-
-#define S3C2440_GPJ9            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 9)
-#define S3C2440_GPJ9_INP        (0x00 << 18)
-#define S3C2440_GPJ9_OUTP       (0x01 << 18)
-#define S3C2440_GPJ9_CAMVSYNC   (0x02 << 18)
-
-#define S3C2440_GPJ10           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 10)
-#define S3C2440_GPJ10_INP       (0x00 << 20)
-#define S3C2440_GPJ10_OUTP      (0x01 << 20)
-#define S3C2440_GPJ10_CAMHREF   (0x02 << 20)
-
-#define S3C2440_GPJ11           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 11)
-#define S3C2440_GPJ11_INP       (0x00 << 22)
-#define S3C2440_GPJ11_OUTP      (0x01 << 22)
-#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22)
-
-#define S3C2440_GPJ12           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 12)
-#define S3C2440_GPJ12_INP       (0x00 << 24)
-#define S3C2440_GPJ12_OUTP      (0x01 << 24)
-#define S3C2440_GPJ12_CAMRESET  (0x02 << 24)
-
-#define S3C2443_GPJ13		S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 13)
-#define S3C2443_GPJ14		S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 14)
-#define S3C2443_GPJ15		S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 15)
-
-#endif	/* __ASM_ARCH_REGS_GPIOJ_H */
-
diff --git a/include/asm-arm/arch-s3c2410/regs-irq.h b/include/asm-arm/arch-s3c2410/regs-irq.h
deleted file mode 100644
index 498184c..0000000
--- a/include/asm-arm/arch-s3c2410/regs-irq.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-irq.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-
-#ifndef ___ASM_ARCH_REGS_IRQ_H
-#define ___ASM_ARCH_REGS_IRQ_H "$Id: irq.h,v 1.3 2003/03/25 21:29:06 ben Exp $"
-
-/* interrupt controller */
-
-#define S3C2410_IRQREG(x)   ((x) + S3C24XX_VA_IRQ)
-#define S3C2410_EINTREG(x)  ((x) + S3C24XX_VA_GPIO)
-#define S3C24XX_EINTREG(x)  ((x) + S3C24XX_VA_GPIO2)
-
-#define S3C2410_SRCPND	       S3C2410_IRQREG(0x000)
-#define S3C2410_INTMOD	       S3C2410_IRQREG(0x004)
-#define S3C2410_INTMSK	       S3C2410_IRQREG(0x008)
-#define S3C2410_PRIORITY       S3C2410_IRQREG(0x00C)
-#define S3C2410_INTPND	       S3C2410_IRQREG(0x010)
-#define S3C2410_INTOFFSET      S3C2410_IRQREG(0x014)
-#define S3C2410_SUBSRCPND      S3C2410_IRQREG(0x018)
-#define S3C2410_INTSUBMSK      S3C2410_IRQREG(0x01C)
-
-/* mask: 0=enable, 1=disable
- * 1 bit EINT, 4=EINT4, 23=EINT23
- * EINT0,1,2,3 are not handled here.
-*/
-
-#define S3C2410_EINTMASK       S3C2410_EINTREG(0x0A4)
-#define S3C2410_EINTPEND       S3C2410_EINTREG(0X0A8)
-#define S3C2412_EINTMASK       S3C2410_EINTREG(0x0B4)
-#define S3C2412_EINTPEND       S3C2410_EINTREG(0X0B8)
-
-#define S3C24XX_EINTMASK       S3C24XX_EINTREG(0x0A4)
-#define S3C24XX_EINTPEND       S3C24XX_EINTREG(0X0A8)
-
-#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-lcd.h b/include/asm-arm/arch-s3c2410/regs-lcd.h
deleted file mode 100644
index bd85484..0000000
--- a/include/asm-arm/arch-s3c2410/regs-lcd.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-lcd.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-
-#ifndef ___ASM_ARCH_REGS_LCD_H
-#define ___ASM_ARCH_REGS_LCD_H "$Id: lcd.h,v 1.3 2003/06/26 13:25:06 ben Exp $"
-
-#define S3C2410_LCDREG(x)	(x)
-
-/* LCD control registers */
-#define S3C2410_LCDCON1	    S3C2410_LCDREG(0x00)
-#define S3C2410_LCDCON2	    S3C2410_LCDREG(0x04)
-#define S3C2410_LCDCON3	    S3C2410_LCDREG(0x08)
-#define S3C2410_LCDCON4	    S3C2410_LCDREG(0x0C)
-#define S3C2410_LCDCON5	    S3C2410_LCDREG(0x10)
-
-#define S3C2410_LCDCON1_CLKVAL(x)  ((x) << 8)
-#define S3C2410_LCDCON1_MMODE	   (1<<7)
-#define S3C2410_LCDCON1_DSCAN4	   (0<<5)
-#define S3C2410_LCDCON1_STN4	   (1<<5)
-#define S3C2410_LCDCON1_STN8	   (2<<5)
-#define S3C2410_LCDCON1_TFT	   (3<<5)
-
-#define S3C2410_LCDCON1_STN1BPP	   (0<<1)
-#define S3C2410_LCDCON1_STN2GREY   (1<<1)
-#define S3C2410_LCDCON1_STN4GREY   (2<<1)
-#define S3C2410_LCDCON1_STN8BPP	   (3<<1)
-#define S3C2410_LCDCON1_STN12BPP   (4<<1)
-
-#define S3C2410_LCDCON1_TFT1BPP	   (8<<1)
-#define S3C2410_LCDCON1_TFT2BPP	   (9<<1)
-#define S3C2410_LCDCON1_TFT4BPP	   (10<<1)
-#define S3C2410_LCDCON1_TFT8BPP	   (11<<1)
-#define S3C2410_LCDCON1_TFT16BPP   (12<<1)
-#define S3C2410_LCDCON1_TFT24BPP   (13<<1)
-
-#define S3C2410_LCDCON1_ENVID	   (1)
-
-#define S3C2410_LCDCON1_MODEMASK    0x1E
-
-#define S3C2410_LCDCON2_VBPD(x)	    ((x) << 24)
-#define S3C2410_LCDCON2_LINEVAL(x)  ((x) << 14)
-#define S3C2410_LCDCON2_VFPD(x)	    ((x) << 6)
-#define S3C2410_LCDCON2_VSPW(x)	    ((x) << 0)
-
-#define S3C2410_LCDCON2_GET_VBPD(x) ( ((x) >> 24) & 0xFF)
-#define S3C2410_LCDCON2_GET_VFPD(x) ( ((x) >>  6) & 0xFF)
-#define S3C2410_LCDCON2_GET_VSPW(x) ( ((x) >>  0) & 0x3F)
-
-#define S3C2410_LCDCON3_HBPD(x)	    ((x) << 19)
-#define S3C2410_LCDCON3_WDLY(x)	    ((x) << 19)
-#define S3C2410_LCDCON3_HOZVAL(x)   ((x) << 8)
-#define S3C2410_LCDCON3_HFPD(x)	    ((x) << 0)
-#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0)
-
-#define S3C2410_LCDCON3_GET_HBPD(x) ( ((x) >> 19) & 0x7F)
-#define S3C2410_LCDCON3_GET_HFPD(x) ( ((x) >>  0) & 0xFF)
-
-/* LDCCON4 changes for STN mode on the S3C2412 */
-
-#define S3C2410_LCDCON4_MVAL(x)	    ((x) << 8)
-#define S3C2410_LCDCON4_HSPW(x)	    ((x) << 0)
-#define S3C2410_LCDCON4_WLH(x)	    ((x) << 0)
-
-#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >>  0) & 0xFF)
-
-#define S3C2410_LCDCON5_BPP24BL	    (1<<12)
-#define S3C2410_LCDCON5_FRM565	    (1<<11)
-#define S3C2410_LCDCON5_INVVCLK	    (1<<10)
-#define S3C2410_LCDCON5_INVVLINE    (1<<9)
-#define S3C2410_LCDCON5_INVVFRAME   (1<<8)
-#define S3C2410_LCDCON5_INVVD	    (1<<7)
-#define S3C2410_LCDCON5_INVVDEN	    (1<<6)
-#define S3C2410_LCDCON5_INVPWREN    (1<<5)
-#define S3C2410_LCDCON5_INVLEND	    (1<<4)
-#define S3C2410_LCDCON5_PWREN	    (1<<3)
-#define S3C2410_LCDCON5_ENLEND	    (1<<2)
-#define S3C2410_LCDCON5_BSWP	    (1<<1)
-#define S3C2410_LCDCON5_HWSWP	    (1<<0)
-
-/* framebuffer start addressed */
-#define S3C2410_LCDSADDR1   S3C2410_LCDREG(0x14)
-#define S3C2410_LCDSADDR2   S3C2410_LCDREG(0x18)
-#define S3C2410_LCDSADDR3   S3C2410_LCDREG(0x1C)
-
-#define S3C2410_LCDBANK(x)	((x) << 21)
-#define S3C2410_LCDBASEU(x)	(x)
-
-#define S3C2410_OFFSIZE(x)	((x) << 11)
-#define S3C2410_PAGEWIDTH(x)	(x)
-
-/* colour lookup and miscellaneous controls */
-
-#define S3C2410_REDLUT	   S3C2410_LCDREG(0x20)
-#define S3C2410_GREENLUT   S3C2410_LCDREG(0x24)
-#define S3C2410_BLUELUT	   S3C2410_LCDREG(0x28)
-
-#define S3C2410_DITHMODE   S3C2410_LCDREG(0x4C)
-#define S3C2410_TPAL	   S3C2410_LCDREG(0x50)
-
-#define S3C2410_TPAL_EN		(1<<24)
-
-/* interrupt info */
-#define S3C2410_LCDINTPND  S3C2410_LCDREG(0x54)
-#define S3C2410_LCDSRCPND  S3C2410_LCDREG(0x58)
-#define S3C2410_LCDINTMSK  S3C2410_LCDREG(0x5C)
-#define S3C2410_LCDINT_FIWSEL	(1<<2)
-#define	S3C2410_LCDINT_FRSYNC	(1<<1)
-#define S3C2410_LCDINT_FICNT	(1<<0)
-
-/* s3c2442 extra stn registers */
-
-#define S3C2442_REDLUT		S3C2410_LCDREG(0x20)
-#define S3C2442_GREENLUT	S3C2410_LCDREG(0x24)
-#define S3C2442_BLUELUT		S3C2410_LCDREG(0x28)
-#define S3C2442_DITHMODE	S3C2410_LCDREG(0x20)
-
-#define S3C2410_LPCSEL	   S3C2410_LCDREG(0x60)
-
-#define S3C2410_TFTPAL(x)  S3C2410_LCDREG((0x400 + (x)*4))
-
-/* S3C2412 registers */
-
-#define S3C2412_TPAL		S3C2410_LCDREG(0x20)
-
-#define S3C2412_LCDINTPND	S3C2410_LCDREG(0x24)
-#define S3C2412_LCDSRCPND	S3C2410_LCDREG(0x28)
-#define S3C2412_LCDINTMSK	S3C2410_LCDREG(0x2C)
-
-#define S3C2412_TCONSEL		S3C2410_LCDREG(0x30)
-
-#define S3C2412_LCDCON6		S3C2410_LCDREG(0x34)
-#define S3C2412_LCDCON7		S3C2410_LCDREG(0x38)
-#define S3C2412_LCDCON8		S3C2410_LCDREG(0x3C)
-#define S3C2412_LCDCON9		S3C2410_LCDREG(0x40)
-
-#define S3C2412_REDLUT(x)	S3C2410_LCDREG(0x44 + ((x)*4))
-#define S3C2412_GREENLUT(x)	S3C2410_LCDREG(0x60 + ((x)*4))
-#define S3C2412_BLUELUT(x)	S3C2410_LCDREG(0x98 + ((x)*4))
-
-#define S3C2412_FRCPAT(x)	S3C2410_LCDREG(0xB4 + ((x)*4))
-
-/* general registers */
-
-/* base of the LCD registers, where INTPND, INTSRC and then INTMSK
- * are available. */
-
-#define S3C2410_LCDINTBASE	S3C2410_LCDREG(0x54)
-#define S3C2412_LCDINTBASE	S3C2410_LCDREG(0x24)
-
-#define S3C24XX_LCDINTPND	(0x00)
-#define S3C24XX_LCDSRCPND	(0x04)
-#define S3C24XX_LCDINTMSK	(0x08)
-
-#endif /* ___ASM_ARCH_REGS_LCD_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-mem.h b/include/asm-arm/arch-s3c2410/regs-mem.h
deleted file mode 100644
index 312ff93..0000000
--- a/include/asm-arm/arch-s3c2410/regs-mem.h
+++ /dev/null
@@ -1,220 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-mem.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Memory Control register definitions
-*/
-
-#ifndef __ASM_ARM_MEMREGS_H
-#define __ASM_ARM_MEMREGS_H "$Id: regs.h,v 1.8 2003/05/01 15:55:41 ben Exp $"
-
-#ifndef S3C2410_MEMREG
-#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
-
-/* bus width, and wait state control */
-#define S3C2410_BWSCON			S3C2410_MEMREG(0x0000)
-
-/* bank zero config - note, pinstrapped from OM pins! */
-#define S3C2410_BWSCON_DW0_16		(1<<1)
-#define S3C2410_BWSCON_DW0_32		(2<<1)
-
-/* bank one configs */
-#define S3C2410_BWSCON_DW1_8		(0<<4)
-#define S3C2410_BWSCON_DW1_16		(1<<4)
-#define S3C2410_BWSCON_DW1_32		(2<<4)
-#define S3C2410_BWSCON_WS1		(1<<6)
-#define S3C2410_BWSCON_ST1		(1<<7)
-
-/* bank 2 configurations */
-#define S3C2410_BWSCON_DW2_8		(0<<8)
-#define S3C2410_BWSCON_DW2_16		(1<<8)
-#define S3C2410_BWSCON_DW2_32		(2<<8)
-#define S3C2410_BWSCON_WS2		(1<<10)
-#define S3C2410_BWSCON_ST2		(1<<11)
-
-/* bank 3 configurations */
-#define S3C2410_BWSCON_DW3_8		(0<<12)
-#define S3C2410_BWSCON_DW3_16		(1<<12)
-#define S3C2410_BWSCON_DW3_32		(2<<12)
-#define S3C2410_BWSCON_WS3		(1<<14)
-#define S3C2410_BWSCON_ST3		(1<<15)
-
-/* bank 4 configurations */
-#define S3C2410_BWSCON_DW4_8		(0<<16)
-#define S3C2410_BWSCON_DW4_16		(1<<16)
-#define S3C2410_BWSCON_DW4_32		(2<<16)
-#define S3C2410_BWSCON_WS4		(1<<18)
-#define S3C2410_BWSCON_ST4		(1<<19)
-
-/* bank 5 configurations */
-#define S3C2410_BWSCON_DW5_8		(0<<20)
-#define S3C2410_BWSCON_DW5_16		(1<<20)
-#define S3C2410_BWSCON_DW5_32		(2<<20)
-#define S3C2410_BWSCON_WS5		(1<<22)
-#define S3C2410_BWSCON_ST5		(1<<23)
-
-/* bank 6 configurations */
-#define S3C2410_BWSCON_DW6_8		(0<<24)
-#define S3C2410_BWSCON_DW6_16		(1<<24)
-#define S3C2410_BWSCON_DW6_32		(2<<24)
-#define S3C2410_BWSCON_WS6		(1<<26)
-#define S3C2410_BWSCON_ST6		(1<<27)
-
-/* bank 7 configurations */
-#define S3C2410_BWSCON_DW7_8		(0<<28)
-#define S3C2410_BWSCON_DW7_16		(1<<28)
-#define S3C2410_BWSCON_DW7_32		(2<<28)
-#define S3C2410_BWSCON_WS7		(1<<30)
-#define S3C2410_BWSCON_ST7		(1<<31)
-
-/* memory set (rom, ram) */
-#define S3C2410_BANKCON0		S3C2410_MEMREG(0x0004)
-#define S3C2410_BANKCON1		S3C2410_MEMREG(0x0008)
-#define S3C2410_BANKCON2		S3C2410_MEMREG(0x000C)
-#define S3C2410_BANKCON3		S3C2410_MEMREG(0x0010)
-#define S3C2410_BANKCON4		S3C2410_MEMREG(0x0014)
-#define S3C2410_BANKCON5		S3C2410_MEMREG(0x0018)
-#define S3C2410_BANKCON6		S3C2410_MEMREG(0x001C)
-#define S3C2410_BANKCON7		S3C2410_MEMREG(0x0020)
-
-/* bank configuration registers */
-
-#define S3C2410_BANKCON_PMCnorm		(0x00)
-#define S3C2410_BANKCON_PMC4		(0x01)
-#define S3C2410_BANKCON_PMC8		(0x02)
-#define S3C2410_BANKCON_PMC16		(0x03)
-
-/* bank configurations for banks 0..7, note banks
- * 6 and 7 have differnt configurations depending on
- * the memory type bits */
-
-#define S3C2410_BANKCON_Tacp2		(0x0 << 2)
-#define S3C2410_BANKCON_Tacp3		(0x1 << 2)
-#define S3C2410_BANKCON_Tacp4		(0x2 << 2)
-#define S3C2410_BANKCON_Tacp6		(0x3 << 2)
-#define S3C2410_BANKCON_Tacp_SHIFT	(2)
-
-#define S3C2410_BANKCON_Tcah0		(0x0 << 4)
-#define S3C2410_BANKCON_Tcah1		(0x1 << 4)
-#define S3C2410_BANKCON_Tcah2		(0x2 << 4)
-#define S3C2410_BANKCON_Tcah4		(0x3 << 4)
-#define S3C2410_BANKCON_Tcah_SHIFT	(4)
-
-#define S3C2410_BANKCON_Tcoh0		(0x0 << 6)
-#define S3C2410_BANKCON_Tcoh1		(0x1 << 6)
-#define S3C2410_BANKCON_Tcoh2		(0x2 << 6)
-#define S3C2410_BANKCON_Tcoh4		(0x3 << 6)
-#define S3C2410_BANKCON_Tcoh_SHIFT	(6)
-
-#define S3C2410_BANKCON_Tacc1		(0x0 << 8)
-#define S3C2410_BANKCON_Tacc2		(0x1 << 8)
-#define S3C2410_BANKCON_Tacc3		(0x2 << 8)
-#define S3C2410_BANKCON_Tacc4		(0x3 << 8)
-#define S3C2410_BANKCON_Tacc6		(0x4 << 8)
-#define S3C2410_BANKCON_Tacc8		(0x5 << 8)
-#define S3C2410_BANKCON_Tacc10		(0x6 << 8)
-#define S3C2410_BANKCON_Tacc14		(0x7 << 8)
-#define S3C2410_BANKCON_Tacc_SHIFT	(8)
-
-#define S3C2410_BANKCON_Tcos0		(0x0 << 11)
-#define S3C2410_BANKCON_Tcos1		(0x1 << 11)
-#define S3C2410_BANKCON_Tcos2		(0x2 << 11)
-#define S3C2410_BANKCON_Tcos4		(0x3 << 11)
-#define S3C2410_BANKCON_Tcos_SHIFT	(11)
-
-#define S3C2410_BANKCON_Tacs0		(0x0 << 13)
-#define S3C2410_BANKCON_Tacs1		(0x1 << 13)
-#define S3C2410_BANKCON_Tacs2		(0x2 << 13)
-#define S3C2410_BANKCON_Tacs4		(0x3 << 13)
-#define S3C2410_BANKCON_Tacs_SHIFT	(13)
-
-#define S3C2410_BANKCON_SRAM		(0x0 << 15)
-#define S3C2400_BANKCON_EDODRAM		(0x2 << 15)
-#define S3C2410_BANKCON_SDRAM		(0x3 << 15)
-
-/* next bits only for EDO DRAM in 6,7 */
-#define S3C2400_BANKCON_EDO_Trcd1      (0x00 << 4)
-#define S3C2400_BANKCON_EDO_Trcd2      (0x01 << 4)
-#define S3C2400_BANKCON_EDO_Trcd3      (0x02 << 4)
-#define S3C2400_BANKCON_EDO_Trcd4      (0x03 << 4)
-
-/* CAS pulse width */
-#define S3C2400_BANKCON_EDO_PULSE1     (0x00 << 3)
-#define S3C2400_BANKCON_EDO_PULSE2     (0x01 << 3)
-
-/* CAS pre-charge */
-#define S3C2400_BANKCON_EDO_TCP1       (0x00 << 2)
-#define S3C2400_BANKCON_EDO_TCP2       (0x01 << 2)
-
-/* control column address select */
-#define S3C2400_BANKCON_EDO_SCANb8     (0x00 << 0)
-#define S3C2400_BANKCON_EDO_SCANb9     (0x01 << 0)
-#define S3C2400_BANKCON_EDO_SCANb10    (0x02 << 0)
-#define S3C2400_BANKCON_EDO_SCANb11    (0x03 << 0)
-
-/* next bits only for SDRAM in 6,7 */
-#define S3C2410_BANKCON_Trcd2		(0x00 << 2)
-#define S3C2410_BANKCON_Trcd3		(0x01 << 2)
-#define S3C2410_BANKCON_Trcd4		(0x02 << 2)
-
-/* control column address select */
-#define S3C2410_BANKCON_SCANb8		(0x00 << 0)
-#define S3C2410_BANKCON_SCANb9		(0x01 << 0)
-#define S3C2410_BANKCON_SCANb10		(0x02 << 0)
-
-#define S3C2410_REFRESH			S3C2410_MEMREG(0x0024)
-#define S3C2410_BANKSIZE		S3C2410_MEMREG(0x0028)
-#define S3C2410_MRSRB6			S3C2410_MEMREG(0x002C)
-#define S3C2410_MRSRB7			S3C2410_MEMREG(0x0030)
-
-/* refresh control */
-
-#define S3C2410_REFRESH_REFEN		(1<<23)
-#define S3C2410_REFRESH_SELF		(1<<22)
-#define S3C2410_REFRESH_REFCOUNTER	((1<<11)-1)
-
-#define S3C2410_REFRESH_TRP_MASK	(3<<20)
-#define S3C2410_REFRESH_TRP_2clk	(0<<20)
-#define S3C2410_REFRESH_TRP_3clk	(1<<20)
-#define S3C2410_REFRESH_TRP_4clk	(2<<20)
-
-#define S3C2400_REFRESH_DRAM_TRP_MASK   (3<<20)
-#define S3C2400_REFRESH_DRAM_TRP_1_5clk (0<<20)
-#define S3C2400_REFRESH_DRAM_TRP_2_5clk (1<<20)
-#define S3C2400_REFRESH_DRAM_TRP_3_5clk (2<<20)
-#define S3C2400_REFRESH_DRAM_TRP_4_5clk (3<<20)
-
-#define S3C2410_REFRESH_TSRC_MASK	(3<<18)
-#define S3C2410_REFRESH_TSRC_4clk	(0<<18)
-#define S3C2410_REFRESH_TSRC_5clk	(1<<18)
-#define S3C2410_REFRESH_TSRC_6clk	(2<<18)
-#define S3C2410_REFRESH_TSRC_7clk	(3<<18)
-
-
-/* mode select register(s) */
-
-#define  S3C2410_MRSRB_CL1		(0x00 << 4)
-#define  S3C2410_MRSRB_CL2		(0x02 << 4)
-#define  S3C2410_MRSRB_CL3		(0x03 << 4)
-
-/* bank size register */
-#define S3C2410_BANKSIZE_128M		(0x2 << 0)
-#define S3C2410_BANKSIZE_64M		(0x1 << 0)
-#define S3C2410_BANKSIZE_32M		(0x0 << 0)
-#define S3C2410_BANKSIZE_16M		(0x7 << 0)
-#define S3C2410_BANKSIZE_8M		(0x6 << 0)
-#define S3C2410_BANKSIZE_4M		(0x5 << 0)
-#define S3C2410_BANKSIZE_2M		(0x4 << 0)
-#define S3C2410_BANKSIZE_MASK		(0x7 << 0)
-#define S3C2400_BANKSIZE_MASK           (0x4 << 0)
-#define S3C2410_BANKSIZE_SCLK_EN	(1<<4)
-#define S3C2410_BANKSIZE_SCKE_EN	(1<<5)
-#define S3C2410_BANKSIZE_BURST		(1<<7)
-
-#endif /* __ASM_ARM_MEMREGS_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-power.h b/include/asm-arm/arch-s3c2410/regs-power.h
deleted file mode 100644
index 13d13b7..0000000
--- a/include/asm-arm/arch-s3c2410/regs-power.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-power.h
- *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- *		      http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C24XX power control register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_PWR
-#define __ASM_ARM_REGS_PWR __FILE__
-
-#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2412_PWRMODECON	S3C24XX_PWRREG(0x20)
-#define S3C2412_PWRCFG		S3C24XX_PWRREG(0x24)
-
-#define S3C2412_INFORM0		S3C24XX_PWRREG(0x70)
-#define S3C2412_INFORM1		S3C24XX_PWRREG(0x74)
-#define S3C2412_INFORM2		S3C24XX_PWRREG(0x78)
-#define S3C2412_INFORM3		S3C24XX_PWRREG(0x7C)
-
-#define S3C2412_PWRCFG_BATF_IRQ			(1<<0)
-#define S3C2412_PWRCFG_BATF_IGNORE		(2<<0)
-#define S3C2412_PWRCFG_BATF_SLEEP		(3<<0)
-#define S3C2412_PWRCFG_BATF_MASK		(3<<0)
-
-#define S3C2412_PWRCFG_STANDBYWFI_IGNORE	(0<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_IDLE		(1<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_STOP		(2<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_SLEEP		(3<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_MASK		(3<<6)
-
-#define S3C2412_PWRCFG_RTC_MASKIRQ		(1<<8)
-#define S3C2412_PWRCFG_NAND_NORST		(1<<9)
-
-#endif /* __ASM_ARM_REGS_PWR */
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h b/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h
deleted file mode 100644
index c8c793e..0000000
--- a/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2412 memory register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_S3C2412_MEM
-#define __ASM_ARM_REGS_S3C2412_MEM
-
-#ifndef S3C2412_MEMREG
-#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
-
-#define S3C2412_BANKCFG			S3C2412_MEMREG(0x00)
-#define S3C2412_BANKCON1		S3C2412_MEMREG(0x04)
-#define S3C2412_BANKCON2		S3C2412_MEMREG(0x08)
-#define S3C2412_BANKCON3		S3C2412_MEMREG(0x0C)
-
-#define S3C2412_REFRESH			S3C2412_MEMREG(0x10)
-#define S3C2412_TIMEOUT			S3C2412_MEMREG(0x14)
-
-#endif /*  __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412.h b/include/asm-arm/arch-s3c2410/regs-s3c2412.h
deleted file mode 100644
index 783b18f..0000000
--- a/include/asm-arm/arch-s3c2410/regs-s3c2412.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412.h
- *
- * Copyright 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2412 specific register definitions
-*/
-
-#ifndef __ASM_ARCH_REGS_S3C2412_H
-#define __ASM_ARCH_REGS_S3C2412_H "s3c2412"
-
-#define S3C2412_SWRST		(S3C24XX_VA_CLKPWR + 0x30)
-#define S3C2412_SWRST_RESET	(0x533C2412)
-
-/* see regs-power.h for the other registers in the power block. */
-
-#endif	/* __ASM_ARCH_REGS_S3C2412_H */
-
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h b/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
deleted file mode 100644
index c141465..0000000
--- a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
- *
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2443 clock register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_S3C2443_CLOCK
-#define __ASM_ARM_REGS_S3C2443_CLOCK
-
-#define S3C2443_CLKREG(x)		((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2443_PLLCON_MDIVSHIFT	16
-#define S3C2443_PLLCON_PDIVSHIFT	8
-#define S3C2443_PLLCON_SDIVSHIFT	0
-#define S3C2443_PLLCON_MDIVMASK		((1<<(1+(23-16)))-1)
-#define S3C2443_PLLCON_PDIVMASK		((1<<(1+(9-8)))-1)
-#define S3C2443_PLLCON_SDIVMASK		(3)
-
-#define S3C2443_MPLLCON			S3C2443_CLKREG(0x10)
-#define S3C2443_EPLLCON			S3C2443_CLKREG(0x18)
-#define S3C2443_CLKSRC			S3C2443_CLKREG(0x20)
-#define S3C2443_CLKDIV0			S3C2443_CLKREG(0x24)
-#define S3C2443_CLKDIV1			S3C2443_CLKREG(0x28)
-#define S3C2443_HCLKCON			S3C2443_CLKREG(0x30)
-#define S3C2443_PCLKCON			S3C2443_CLKREG(0x34)
-#define S3C2443_SCLKCON			S3C2443_CLKREG(0x38)
-#define S3C2443_PWRMODE			S3C2443_CLKREG(0x40)
-#define S3C2443_SWRST			S3C2443_CLKREG(0x44)
-#define S3C2443_BUSPRI0			S3C2443_CLKREG(0x50)
-#define S3C2443_SYSID			S3C2443_CLKREG(0x5C)
-#define S3C2443_PWRCFG			S3C2443_CLKREG(0x60)
-#define S3C2443_RSTCON			S3C2443_CLKREG(0x64)
-
-#define S3C2443_SWRST_RESET		(0x533c2443)
-
-#define S3C2443_PLLCON_OFF		(1<<24)
-
-#define S3C2443_CLKSRC_I2S_EXT		(1<<14)
-#define S3C2443_CLKSRC_I2S_EPLLDIV	(0<<14)
-#define S3C2443_CLKSRC_I2S_EPLLREF	(2<<14)
-#define S3C2443_CLKSRC_I2S_EPLLREF3	(3<<14)
-#define S3C2443_CLKSRC_I2S_MASK		(3<<14)
-
-#define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<8)
-#define S3C2443_CLKSRC_EPLLREF_EXTCLK	(3<<8)
-#define S3C2443_CLKSRC_EPLLREF_MPLLREF	(0<<8)
-#define S3C2443_CLKSRC_EPLLREF_MPLLREF2	(1<<8)
-#define S3C2443_CLKSRC_EPLLREF_MASK	(3<<8)
-
-#define S3C2443_CLKSRC_ESYSCLK_EPLL	(1<<6)
-#define S3C2443_CLKSRC_MSYSCLK_MPLL	(1<<4)
-#define S3C2443_CLKSRC_EXTCLK_DIV	(1<<3)
-
-#define S3C2443_CLKDIV0_DVS		(1<<13)
-#define S3C2443_CLKDIV0_HALF_HCLK	(1<<3)
-#define S3C2443_CLKDIV0_HALF_PCLK	(1<<2)
-
-#define S3C2443_CLKDIV0_HCLKDIV_MASK	(3<<0)
-
-#define S3C2443_CLKDIV0_EXTDIV_MASK	(3<<6)
-#define S3C2443_CLKDIV0_EXTDIV_SHIFT	(6)
-
-#define S3C2443_CLKDIV0_PREDIV_MASK	(3<<4)
-#define S3C2443_CLKDIV0_PREDIV_SHIFT	(4)
-
-#define S3C2443_CLKDIV0_ARMDIV_MASK	(15<<9)
-#define S3C2443_CLKDIV0_ARMDIV_SHIFT	(9)
-#define S3C2443_CLKDIV0_ARMDIV_1	(0<<9)
-#define S3C2443_CLKDIV0_ARMDIV_2	(8<<9)
-#define S3C2443_CLKDIV0_ARMDIV_3	(2<<9)
-#define S3C2443_CLKDIV0_ARMDIV_4	(9<<9)
-#define S3C2443_CLKDIV0_ARMDIV_6	(10<<9)
-#define S3C2443_CLKDIV0_ARMDIV_8	(11<<9)
-#define S3C2443_CLKDIV0_ARMDIV_12	(13<<9)
-#define S3C2443_CLKDIV0_ARMDIV_16	(15<<9)
-
-/* S3C2443_CLKDIV1 */
-
-#define S3C2443_CLKDIV1_CAMDIV_MASK	(15<<26)
-#define S3C2443_CLKDIV1_CAMDIV_SHIFT	(26)
-
-#define S3C2443_CLKDIV1_HSSPIDIV_MASK	(3<<24)
-#define S3C2443_CLKDIV1_HSSPIDIV_SHIFT	(24)
-
-#define S3C2443_CLKDIV1_DISPDIV_MASK	(0xff<<16)
-#define S3C2443_CLKDIV1_DISPDIV_SHIFT	(16)
-
-#define S3C2443_CLKDIV1_I2SDIV_MASK	(15<<12)
-#define S3C2443_CLKDIV1_I2SDIV_SHIFT	(12)
-
-#define S3C2443_CLKDIV1_UARTDIV_MASK	(15<<8)
-#define S3C2443_CLKDIV1_UARTDIV_SHIFT	(8)
-
-#define S3C2443_CLKDIV1_HSMMCDIV_MASK	(3<<6)
-#define S3C2443_CLKDIV1_HSMMCDIV_SHIFT	(6)
-
-#define S3C2443_CLKDIV1_USBHOSTDIV_MASK	(3<<4)
-#define S3C2443_CLKDIV1_USBHOSTDIV_SHIFT (4)
-
-#define S3C2443_CLKCON_NAND
-
-#define S3C2443_HCLKCON_DMA0		(1<<0)
-#define S3C2443_HCLKCON_DMA1		(1<<1)
-#define S3C2443_HCLKCON_DMA2		(1<<2)
-#define S3C2443_HCLKCON_DMA3		(1<<3)
-#define S3C2443_HCLKCON_DMA4		(1<<4)
-#define S3C2443_HCLKCON_DMA5		(1<<5)
-#define S3C2443_HCLKCON_CAMIF		(1<<8)
-#define S3C2443_HCLKCON_DISP		(1<<9)
-#define S3C2443_HCLKCON_LCDC		(1<<10)
-#define S3C2443_HCLKCON_USBH		(1<<11)
-#define S3C2443_HCLKCON_USBD		(1<<12)
-#define S3C2443_HCLKCON_HSMMC		(1<<16)
-#define S3C2443_HCLKCON_CFC		(1<<17)
-#define S3C2443_HCLKCON_SSMC		(1<<18)
-#define S3C2443_HCLKCON_DRAMC		(1<<19)
-
-#define S3C2443_PCLKCON_UART0		(1<<0)
-#define S3C2443_PCLKCON_UART1		(1<<1)
-#define S3C2443_PCLKCON_UART2		(1<<2)
-#define S3C2443_PCLKCON_UART3		(1<<3)
-#define S3C2443_PCLKCON_IIC		(1<<4)
-#define S3C2443_PCLKCON_SDI		(1<<5)
-#define S3C2443_PCLKCON_ADC		(1<<7)
-#define S3C2443_PCLKCON_AC97		(1<<8)
-#define S3C2443_PCLKCON_IIS		(1<<9)
-#define S3C2443_PCLKCON_PWMT		(1<<10)
-#define S3C2443_PCLKCON_WDT		(1<<11)
-#define S3C2443_PCLKCON_RTC		(1<<12)
-#define S3C2443_PCLKCON_GPIO		(1<<13)
-#define S3C2443_PCLKCON_SPI0		(1<<14)
-#define S3C2443_PCLKCON_SPI1		(1<<15)
-
-#define S3C2443_SCLKCON_DDRCLK		(1<<16)
-#define S3C2443_SCLKCON_SSMCCLK		(1<<15)
-#define S3C2443_SCLKCON_HSSPICLK	(1<<14)
-#define S3C2443_SCLKCON_HSMMCCLK_EXT	(1<<13)
-#define S3C2443_SCLKCON_HSMMCCLK_EPLL	(1<<12)
-#define S3C2443_SCLKCON_CAMCLK		(1<<11)
-#define S3C2443_SCLKCON_DISPCLK		(1<<10)
-#define S3C2443_SCLKCON_I2SCLK		(1<<9)
-#define S3C2443_SCLKCON_UARTCLK		(1<<8)
-#define S3C2443_SCLKCON_USBHOST		(1<<1)
-
-#include <asm/div64.h>
-
-static inline unsigned int
-s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
-	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
-	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
-
-	mdiv &= S3C2443_PLLCON_MDIVMASK;
-	pdiv &= S3C2443_PLLCON_PDIVMASK;
-	sdiv &= S3C2443_PLLCON_SDIVMASK;
-
-	fvco = (uint64_t)baseclk * (2 * (mdiv + 8));
-	do_div(fvco, pdiv << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-static inline unsigned int
-s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
-	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
-	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
-
-	mdiv &= S3C2443_PLLCON_MDIVMASK;
-	pdiv &= S3C2443_PLLCON_PDIVMASK;
-	sdiv &= S3C2443_PLLCON_SDIVMASK;
-
-	fvco = (uint64_t)baseclk * (mdiv + 8);
-	do_div(fvco, (pdiv + 2) << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-#endif /*  __ASM_ARM_REGS_S3C2443_CLOCK */
-
diff --git a/include/asm-arm/arch-s3c2410/regs-sdi.h b/include/asm-arm/arch-s3c2410/regs-sdi.h
deleted file mode 100644
index bfb222f..0000000
--- a/include/asm-arm/arch-s3c2410/regs-sdi.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-sdi.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 MMC/SDIO register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_SDI
-#define __ASM_ARM_REGS_SDI "regs-sdi.h"
-
-#define S3C2410_SDICON                (0x00)
-#define S3C2410_SDIPRE                (0x04)
-#define S3C2410_SDICMDARG             (0x08)
-#define S3C2410_SDICMDCON             (0x0C)
-#define S3C2410_SDICMDSTAT            (0x10)
-#define S3C2410_SDIRSP0               (0x14)
-#define S3C2410_SDIRSP1               (0x18)
-#define S3C2410_SDIRSP2               (0x1C)
-#define S3C2410_SDIRSP3               (0x20)
-#define S3C2410_SDITIMER              (0x24)
-#define S3C2410_SDIBSIZE              (0x28)
-#define S3C2410_SDIDCON               (0x2C)
-#define S3C2410_SDIDCNT               (0x30)
-#define S3C2410_SDIDSTA               (0x34)
-#define S3C2410_SDIFSTA               (0x38)
-
-#define S3C2410_SDIDATA               (0x3C)
-#define S3C2410_SDIIMSK               (0x40)
-
-#define S3C2440_SDIDATA               (0x40)
-#define S3C2440_SDIIMSK               (0x3C)
-
-#define S3C2440_SDICON_SDRESET        (1<<8)
-#define S3C2440_SDICON_MMCCLOCK       (1<<5)
-#define S3C2410_SDICON_BYTEORDER      (1<<4)
-#define S3C2410_SDICON_SDIOIRQ        (1<<3)
-#define S3C2410_SDICON_RWAITEN        (1<<2)
-#define S3C2410_SDICON_FIFORESET      (1<<1)
-#define S3C2410_SDICON_CLOCKTYPE      (1<<0)
-
-#define S3C2410_SDICMDCON_ABORT       (1<<12)
-#define S3C2410_SDICMDCON_WITHDATA    (1<<11)
-#define S3C2410_SDICMDCON_LONGRSP     (1<<10)
-#define S3C2410_SDICMDCON_WAITRSP     (1<<9)
-#define S3C2410_SDICMDCON_CMDSTART    (1<<8)
-#define S3C2410_SDICMDCON_SENDERHOST  (1<<6)
-#define S3C2410_SDICMDCON_INDEX       (0x3f)
-
-#define S3C2410_SDICMDSTAT_CRCFAIL    (1<<12)
-#define S3C2410_SDICMDSTAT_CMDSENT    (1<<11)
-#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10)
-#define S3C2410_SDICMDSTAT_RSPFIN     (1<<9)
-#define S3C2410_SDICMDSTAT_XFERING    (1<<8)
-#define S3C2410_SDICMDSTAT_INDEX      (0xff)
-
-#define S3C2440_SDIDCON_DS_BYTE       (0<<22)
-#define S3C2440_SDIDCON_DS_HALFWORD   (1<<22)
-#define S3C2440_SDIDCON_DS_WORD       (2<<22)
-#define S3C2410_SDIDCON_IRQPERIOD     (1<<21)
-#define S3C2410_SDIDCON_TXAFTERRESP   (1<<20)
-#define S3C2410_SDIDCON_RXAFTERCMD    (1<<19)
-#define S3C2410_SDIDCON_BUSYAFTERCMD  (1<<18)
-#define S3C2410_SDIDCON_BLOCKMODE     (1<<17)
-#define S3C2410_SDIDCON_WIDEBUS       (1<<16)
-#define S3C2410_SDIDCON_DMAEN         (1<<15)
-#define S3C2410_SDIDCON_STOP          (1<<14)
-#define S3C2440_SDIDCON_DATSTART      (1<<14)
-#define S3C2410_SDIDCON_DATMODE	      (3<<12)
-#define S3C2410_SDIDCON_BLKNUM        (0x7ff)
-
-/* constants for S3C2410_SDIDCON_DATMODE */
-#define S3C2410_SDIDCON_XFER_READY    (0<<12)
-#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12)
-#define S3C2410_SDIDCON_XFER_RXSTART  (2<<12)
-#define S3C2410_SDIDCON_XFER_TXSTART  (3<<12)
-
-#define S3C2410_SDIDCON_BLKNUM_MASK   (0xFFF)
-#define S3C2410_SDIDCNT_BLKNUM_SHIFT  (12)
-
-#define S3C2410_SDIDSTA_RDYWAITREQ    (1<<10)
-#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9)
-#define S3C2410_SDIDSTA_FIFOFAIL      (1<<8)	/* reserved on 2440 */
-#define S3C2410_SDIDSTA_CRCFAIL       (1<<7)
-#define S3C2410_SDIDSTA_RXCRCFAIL     (1<<6)
-#define S3C2410_SDIDSTA_DATATIMEOUT   (1<<5)
-#define S3C2410_SDIDSTA_XFERFINISH    (1<<4)
-#define S3C2410_SDIDSTA_BUSYFINISH    (1<<3)
-#define S3C2410_SDIDSTA_SBITERR       (1<<2)	/* reserved on 2410a/2440 */
-#define S3C2410_SDIDSTA_TXDATAON      (1<<1)
-#define S3C2410_SDIDSTA_RXDATAON      (1<<0)
-
-#define S3C2440_SDIFSTA_FIFORESET      (1<<16)
-#define S3C2440_SDIFSTA_FIFOFAIL       (3<<14)  /* 3 is correct (2 bits) */
-#define S3C2410_SDIFSTA_TFDET          (1<<13)
-#define S3C2410_SDIFSTA_RFDET          (1<<12)
-#define S3C2410_SDIFSTA_TFHALF         (1<<11)
-#define S3C2410_SDIFSTA_TFEMPTY        (1<<10)
-#define S3C2410_SDIFSTA_RFLAST         (1<<9)
-#define S3C2410_SDIFSTA_RFFULL         (1<<8)
-#define S3C2410_SDIFSTA_RFHALF         (1<<7)
-#define S3C2410_SDIFSTA_COUNTMASK      (0x7f)
-
-#define S3C2410_SDIIMSK_RESPONSECRC    (1<<17)
-#define S3C2410_SDIIMSK_CMDSENT        (1<<16)
-#define S3C2410_SDIIMSK_CMDTIMEOUT     (1<<15)
-#define S3C2410_SDIIMSK_RESPONSEND     (1<<14)
-#define S3C2410_SDIIMSK_READWAIT       (1<<13)
-#define S3C2410_SDIIMSK_SDIOIRQ        (1<<12)
-#define S3C2410_SDIIMSK_FIFOFAIL       (1<<11)
-#define S3C2410_SDIIMSK_CRCSTATUS      (1<<10)
-#define S3C2410_SDIIMSK_DATACRC        (1<<9)
-#define S3C2410_SDIIMSK_DATATIMEOUT    (1<<8)
-#define S3C2410_SDIIMSK_DATAFINISH     (1<<7)
-#define S3C2410_SDIIMSK_BUSYFINISH     (1<<6)
-#define S3C2410_SDIIMSK_SBITERR        (1<<5)	/* reserved 2440/2410a */
-#define S3C2410_SDIIMSK_TXFIFOHALF     (1<<4)
-#define S3C2410_SDIIMSK_TXFIFOEMPTY    (1<<3)
-#define S3C2410_SDIIMSK_RXFIFOLAST     (1<<2)
-#define S3C2410_SDIIMSK_RXFIFOFULL     (1<<1)
-#define S3C2410_SDIIMSK_RXFIFOHALF     (1<<0)
-
-#endif /* __ASM_ARM_REGS_SDI */
diff --git a/include/asm-arm/arch-s3c2410/reset.h b/include/asm-arm/arch-s3c2410/reset.h
deleted file mode 100644
index 4f866cd..0000000
--- a/include/asm-arm/arch-s3c2410/reset.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/reset.h
- *
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 CPU reset controls
-*/
-
-#ifndef __ASM_ARCH_RESET_H
-#define __ASM_ARCH_RESET_H __FILE__
-
-/* This allows the over-ride of the default reset code
-*/
-
-extern void (*s3c24xx_reset_hook)(void);
-
-#endif /* __ASM_ARCH_RESET_H */
diff --git a/include/asm-arm/arch-s3c2410/spi-gpio.h b/include/asm-arm/arch-s3c2410/spi-gpio.h
deleted file mode 100644
index 7380373..0000000
--- a/include/asm-arm/arch-s3c2410/spi-gpio.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/spi-gpio.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - SPI Controller platfrom_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SPIGPIO_H
-#define __ASM_ARCH_SPIGPIO_H __FILE__
-
-struct s3c2410_spigpio_info {
-	unsigned long		 pin_clk;
-	unsigned long		 pin_mosi;
-	unsigned long		 pin_miso;
-
-	int			 bus_num;
-
-	void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
-};
-
-
-#endif /* __ASM_ARCH_SPIGPIO_H */
diff --git a/include/asm-arm/arch-s3c2410/spi.h b/include/asm-arm/arch-s3c2410/spi.h
deleted file mode 100644
index 4421698..0000000
--- a/include/asm-arm/arch-s3c2410/spi.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/spi.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - SPI Controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SPI_H
-#define __ASM_ARCH_SPI_H __FILE__
-
-struct s3c2410_spi_info {
-	unsigned long		 pin_cs;	/* simple gpio cs */
-	unsigned int		 num_cs;	/* total chipselects */
-	int			 bus_num;       /* bus number to use. */
-
-	void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
-};
-
-
-#endif /* __ASM_ARCH_SPI_H */
diff --git a/include/asm-arm/arch-s3c2410/system-reset.h b/include/asm-arm/arch-s3c2410/system-reset.h
deleted file mode 100644
index beeec77..0000000
--- a/include/asm-arm/arch-s3c2410/system-reset.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/system-reset.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System define for arch_reset() function
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-
-#include <asm/plat-s3c/regs-watchdog.h>
-#include <asm/arch/regs-clock.h>
-
-#include <linux/clk.h>
-#include <linux/err.h>
-
-extern void (*s3c24xx_reset_hook)(void);
-
-static void
-arch_reset(char mode)
-{
-	struct clk *wdtclk;
-
-	if (mode == 's') {
-		cpu_reset(0);
-	}
-
-	if (s3c24xx_reset_hook)
-		s3c24xx_reset_hook();
-
-	printk("arch_reset: attempting watchdog reset\n");
-
-	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
-
-	wdtclk = clk_get(NULL, "watchdog");
-	if (!IS_ERR(wdtclk)) {
-		clk_enable(wdtclk);
-	} else
-		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
-
-	/* put initial values into count and data */
-	__raw_writel(0x80, S3C2410_WTCNT);
-	__raw_writel(0x80, S3C2410_WTDAT);
-
-	/* set the watchdog to go and reset... */
-	__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
-		     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
-
-	/* wait for reset to assert... */
-	mdelay(500);
-
-	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
-
-	/* delay to allow the serial port to show the message */
-	mdelay(50);
-
-	/* we'll take a jump through zero as a poor second */
-	cpu_reset(0);
-}
diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h
deleted file mode 100644
index 98f690e..0000000
--- a/include/asm-arm/arch-s3c2410/system.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/system.h
- *
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-
-#include <asm/arch/map.h>
-#include <asm/arch/idle.h>
-#include <asm/arch/reset.h>
-
-#include <asm/arch/regs-clock.h>
-
-void (*s3c24xx_idle)(void);
-void (*s3c24xx_reset_hook)(void);
-
-void s3c24xx_default_idle(void)
-{
-	unsigned long tmp;
-	int i;
-
-	/* idle the system by using the idle mode which will wait for an
-	 * interrupt to happen before restarting the system.
-	 */
-
-	/* Warning: going into idle state upsets jtag scanning */
-
-	__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
-		     S3C2410_CLKCON);
-
-	/* the samsung port seems to do a loop and then unset idle.. */
-	for (i = 0; i < 50; i++) {
-		tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
-	}
-
-	/* this bit is not cleared on re-start... */
-
-	__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
-		     S3C2410_CLKCON);
-}
-
-static void arch_idle(void)
-{
-	if (s3c24xx_idle != NULL)
-		(s3c24xx_idle)();
-	else
-		s3c24xx_default_idle();
-}
-
-#include <asm/arch/system-reset.h>
diff --git a/include/asm-arm/arch-s3c2410/timex.h b/include/asm-arm/arch-s3c2410/timex.h
deleted file mode 100644
index c16a99c..0000000
--- a/include/asm-arm/arch-s3c2410/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/timex.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-
-#define CLOCK_TICK_RATE 12000000
-
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h
deleted file mode 100644
index 48a5731..0000000
--- a/include/asm-arm/arch-s3c2410/uncompress.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/uncompress.h
- *
- * Copyright (c) 2003, 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/map.h>
-
-/* working in physical space... */
-#undef S3C2410_GPIOREG
-#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x)))
-
-#include <asm/plat-s3c/uncompress.h>
-
-static inline int is_arm926(void)
-{
-	unsigned int cpuid;
-
-	asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (cpuid));
-
-	return ((cpuid & 0xff0) == 0x260);
-}
-
-static void arch_detect_cpu(void)
-{
-	unsigned int cpuid;
-
-	cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
-	cpuid &= S3C2410_GSTATUS1_IDMASK;
-
-	if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 ||
-	    cpuid == S3C2410_GSTATUS1_2442) {
-		fifo_mask = S3C2440_UFSTAT_TXMASK;
-		fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
-	} else {
-		fifo_mask = S3C2410_UFSTAT_TXMASK;
-		fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT;
-	}
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/include/asm-arm/arch-s3c2410/usb-control.h b/include/asm-arm/arch-s3c2410/usb-control.h
deleted file mode 100644
index 5bfa376..0000000
--- a/include/asm-arm/arch-s3c2410/usb-control.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/usb-control.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - usb port information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_USBCONTROL_H
-#define __ASM_ARCH_USBCONTROL_H "include/asm-arm/arch-s3c2410/usb-control.h"
-
-#define S3C_HCDFLG_USED	(1)
-
-struct s3c2410_hcd_port {
-	unsigned char	flags;
-	unsigned char	power;
-	unsigned char	oc_status;
-	unsigned char	oc_changed;
-};
-
-struct s3c2410_hcd_info {
-	struct usb_hcd		*hcd;
-	struct s3c2410_hcd_port	port[2];
-
-	void		(*power_control)(int port, int to);
-	void		(*enable_oc)(struct s3c2410_hcd_info *, int on);
-	void		(*report_oc)(struct s3c2410_hcd_info *, int ports);
-};
-
-static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
-{
-	if (info->report_oc != NULL) {
-		(info->report_oc)(info, ports);
-	}
-}
-
-#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/include/asm-arm/arch-s3c2410/vmalloc.h b/include/asm-arm/arch-s3c2410/vmalloc.h
deleted file mode 100644
index 0ae3bdb..0000000
--- a/include/asm-arm/arch-s3c2410/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/vmalloc.h
- *
- * from linux/include/asm-arm/arch-iop3xx/vmalloc.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END	  (0xE0000000)
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/include/asm-arm/arch-s3c2410/vr1000-cpld.h b/include/asm-arm/arch-s3c2410/vr1000-cpld.h
deleted file mode 100644
index 0557b0a..0000000
--- a/include/asm-arm/arch-s3c2410/vr1000-cpld.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/vr1000-cpld.h
- *
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * VR1000 - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_VR1000CPLD_H
-#define __ASM_ARCH_VR1000CPLD_H
-
-#define VR1000_CPLD_CTRL2_RAMWEN     (0x04)   /* SRAM Write Enable */
-
-#endif /* __ASM_ARCH_VR1000CPLD_H */
diff --git a/include/asm-arm/arch-s3c2410/vr1000-irq.h b/include/asm-arm/arch-s3c2410/vr1000-irq.h
deleted file mode 100644
index 8909370..0000000
--- a/include/asm-arm/arch-s3c2410/vr1000-irq.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/vr1000-irq.h
- *
- * Copyright (c) 2003,2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Machine VR1000 - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_VR1000IRQ_H
-#define __ASM_ARCH_VR1000IRQ_H
-
-/* irq numbers to onboard peripherals */
-
-#define IRQ_USBOC	     IRQ_EINT19
-#define IRQ_IDE0	     IRQ_EINT16
-#define IRQ_IDE1	     IRQ_EINT17
-#define IRQ_VR1000_SERIAL    IRQ_EINT12
-#define IRQ_VR1000_DM9000A   IRQ_EINT10
-#define IRQ_VR1000_DM9000N   IRQ_EINT9
-#define IRQ_SMALERT	     IRQ_EINT8
-
-#endif /* __ASM_ARCH_VR1000IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/vr1000-map.h b/include/asm-arm/arch-s3c2410/vr1000-map.h
deleted file mode 100644
index 92a56a7..0000000
--- a/include/asm-arm/arch-s3c2410/vr1000-map.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/vr1000-map.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Machine VR1000 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x13000000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space. We also have the board's CPLD to find register space
- * for.
- */
-
-#ifndef __ASM_ARCH_VR1000MAP_H
-#define __ASM_ARCH_VR1000MAP_H
-
-#include <asm/arch/bast-map.h>
-
-#define VR1000_IOADDR(x) BAST_IOADDR(x)
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define VR1000_VA_CTRL1	    VR1000_IOADDR(0x00000000)	 /* 0x01300000 */
-#define VR1000_PA_CTRL1	    (S3C2410_CS5 | 0x7800000)
-
-#define VR1000_VA_CTRL2	    VR1000_IOADDR(0x00100000)	 /* 0x01400000 */
-#define VR1000_PA_CTRL2	    (S3C2410_CS1 | 0x6000000)
-
-#define VR1000_VA_CTRL3	    VR1000_IOADDR(0x00200000)	 /* 0x01500000 */
-#define VR1000_PA_CTRL3	    (S3C2410_CS1 | 0x6800000)
-
-#define VR1000_VA_CTRL4	    VR1000_IOADDR(0x00300000)	 /* 0x01600000 */
-#define VR1000_PA_CTRL4	    (S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define VR1000_PA_PC104_IRQREQ  (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
-#define VR1000_VA_PC104_IRQREQ  VR1000_IOADDR(0x00400000)
-
-#define VR1000_PA_PC104_IRQRAW  (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
-#define VR1000_VA_PC104_IRQRAW  VR1000_IOADDR(0x00500000)
-
-#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
-#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
-
-/* 0xE0000000 contains the IO space that is split by speed and
- * wether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000  8bit,  slow
- * 0x04000000 to 0x08000000  16bit, slow
- * 0x08000000 to 0x0C000000  16bit, net
- * 0x0C000000 to 0x10000000  16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x02000000 to 0x02100000 1MB  IDE primary channel
- * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB  IDE secondary channel
- * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
- * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controllers
- * 0x02600000 to 0x02700000 1MB
- *
- * the phyiscal layout of the zones are:
- *  nGCS2 - 8bit, slow
- *  nGCS3 - 16bit, slow
- *  nGCS4 - 16bit, net
- *  nGCS5 - 16bit, fast
- */
-
-#define VR1000_VA_MULTISPACE (0xE0000000)
-
-#define VR1000_VA_ISAIO		   (VR1000_VA_MULTISPACE + 0x00000000)
-#define VR1000_VA_ISAMEM	   (VR1000_VA_MULTISPACE + 0x01000000)
-#define VR1000_VA_IDEPRI	   (VR1000_VA_MULTISPACE + 0x02000000)
-#define VR1000_VA_IDEPRIAUX	   (VR1000_VA_MULTISPACE + 0x02100000)
-#define VR1000_VA_IDESEC	   (VR1000_VA_MULTISPACE + 0x02200000)
-#define VR1000_VA_IDESECAUX	   (VR1000_VA_MULTISPACE + 0x02300000)
-#define VR1000_VA_ASIXNET	   (VR1000_VA_MULTISPACE + 0x02400000)
-#define VR1000_VA_DM9000	   (VR1000_VA_MULTISPACE + 0x02500000)
-#define VR1000_VA_SUPERIO	   (VR1000_VA_MULTISPACE + 0x02600000)
-
-/* physical offset addresses for the peripherals */
-
-#define VR1000_PA_IDEPRI	   (0x02000000)
-#define VR1000_PA_IDEPRIAUX	   (0x02800000)
-#define VR1000_PA_IDESEC	   (0x03000000)
-#define VR1000_PA_IDESECAUX	   (0x03800000)
-#define VR1000_PA_DM9000	   (0x05000000)
-
-#define VR1000_PA_SERIAL	   (0x11800000)
-#define VR1000_VA_SERIAL	   (VR1000_IOADDR(0x00700000))
-
-/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
-#define VR1000_PA_SRAM		   (S3C2410_CS1 | 0x05000000)
-
-/* some configurations for the peripherals */
-
-#define VR1000_DM9000_CS	 VR1000_VAM_CS4
-
-#endif /* __ASM_ARCH_VR1000MAP_H */
diff --git a/include/asm-arm/arch-sa1100/SA-1101.h b/include/asm-arm/arch-sa1100/SA-1101.h
deleted file mode 100644
index 65ca8c7..0000000
--- a/include/asm-arm/arch-sa1100/SA-1101.h
+++ /dev/null
@@ -1,925 +0,0 @@
-/*
- * SA-1101.h
- *
- * Copyright (c) Peter Danielsson 1999
- *
- * Definition of constants related to the sa1101
- * support chip for the sa1100
- *
- */
-
-
-/* Be sure that virtual mapping is defined right */
-#ifndef __ASM_ARCH_HARDWARE_H
-#error You must include hardware.h not SA-1101.h
-#endif
-
-#ifndef SA1101_BASE
-#error You must define SA-1101 physical base address
-#endif
-
-#ifndef LANGUAGE
-# ifdef __ASSEMBLY__
-#  define LANGUAGE Assembly
-# else
-#  define LANGUAGE C
-# endif
-#endif
-
-/*
- * We have mapped the sa1101 depending on the value of SA1101_BASE.
- * It then appears from 0xf4000000.
- */
-
-#define SA1101_p2v( x )         ((x) - SA1101_BASE + 0xf4000000)
-#define SA1101_v2p( x )         ((x) - 0xf4000000  + SA1101_BASE)
-
-#ifndef SA1101_p2v
-#define SA1101_p2v(PhAdd)  (PhAdd)
-#endif
-
-#include <asm/arch/bitfield.h>
-
-#define C               0
-#define Assembly        1
-
-
-/*
- * Memory map
- */
-
-#define __SHMEM_CONTROL0	0x00000000
-#define __SYSTEM_CONTROL1	0x00000400
-#define __ARBITER		0x00020000
-#define __SYSTEM_CONTROL2	0x00040000
-#define __SYSTEM_CONTROL3	0x00060000
-#define __PARALLEL_PORT		0x00080000
-#define __VIDMEM_CONTROL	0x00100000
-#define __UPDATE_FIFO		0x00120000
-#define __SHMEM_CONTROL1	0x00140000
-#define __INTERRUPT_CONTROL	0x00160000
-#define __USB_CONTROL		0x00180000
-#define __TRACK_INTERFACE	0x001a0000
-#define __MOUSE_INTERFACE	0x001b0000
-#define __KEYPAD_INTERFACE	0x001c0000
-#define __PCMCIA_INTERFACE	0x001e0000
-#define	__VGA_CONTROL		0x00200000
-#define __GPIO_INTERFACE	0x00300000
-
-/*
- * Macro that calculates real address for registers in the SA-1101
- */
-
-#define _SA1101( x )    ((x) + SA1101_BASE)
-
-/*
- * Interface and shared memory controller registers
- *
- * Registers
- *	SKCR		SA-1101 control register (read/write)
- *	SMCR		Shared Memory Controller Register
- *	SNPR		Snoop Register
- */
-
-#define _SKCR		_SA1101( 0x00000000 ) /* SA-1101 Control Reg. */
-#define _SMCR		_SA1101( 0x00140000 ) /* Shared Mem. Control Reg. */
-#define _SNPR		_SA1101( 0x00140400 ) /* Snoop Reg. */
-
-#if LANGUAGE == C
-#define SKCR		(*((volatile Word *) SA1101_p2v (_SKCR)))
-#define SMCR		(*((volatile Word *) SA1101_p2v (_SMCR)))
-#define SNPR		(*((volatile Word *) SA1101_p2v (_SNPR)))
-
-#define SKCR_PLLEn	  0x0001	  /* Enable On-Chip PLL */
-#define SKCR_BCLKEn	  0x0002	  /* Enables BCLK */
-#define SKCR_Sleep	  0x0004	  /* Sleep Mode */
-#define SKCR_IRefEn	  0x0008	  /* DAC Iref input enable */
-#define SKCR_VCOON	  0x0010	  /* VCO bias */
-#define SKCR_ScanTestEn	  0x0020	  /* Enables scan test */
-#define SKCR_ClockTestEn  0x0040	  /* Enables clock test */
-
-#define SMCR_DCAC	  Fld(2,0)	  /* Number of column address bits */
-#define SMCR_DRAC	  Fld(2,2)	  /* Number of row address bits */
-#define SMCR_ArbiterBias  0x0008	  /* favor video or USB */
-#define SMCR_TopVidMem	  Fld(4,5)	  /* Top 4 bits of vidmem addr. */
-
-#define SMCR_ColAdrBits( x )		  /* col. addr bits 8..11 */ \
-	(( (x) - 8 ) << FShft (SMCR_DCAC))
-#define SMCR_RowAdrBits( x )		  /* row addr bits 9..12 */\
-	(( (x) - 9 ) << FShft (SMCR_DRAC))
-
-#define SNPR_VFBstart	  Fld(12,0)	/* Video frame buffer addr */
-#define SNPR_VFBsize	  Fld(11,12)	/* Video frame buffer size */
-#define SNPR_WholeBank	  (1 << 23)	/* Whole bank bit */
-#define SNPR_BankSelect	  Fld(2,27)	/* Bank select */
-#define SNPR_SnoopEn	  (1 << 31)	/* Enable snoop operation */
-
-#define SNPR_Set_VFBsize( x )   /* set frame buffer size (in kb) */ \
-	( (x) << FShft (SNPR_VFBsize))
-#define SNPR_Select_Bank(x)     /* select bank 0 or 1 */  \
-	(( (x) + 1 ) << FShft (SNPR_BankSelect ))
-
-#endif /* LANGUAGE == C */
-
-/*
- * Video Memory Controller
- *
- * Registers
- *    VMCCR	Configuration register
- *    VMCAR	VMC address register
- *    VMCDR	VMC data register
- *
- */
-
-#define _VMCCR		_SA1101( 0x00100000 )	/* Configuration register */
-#define _VMCAR		_SA1101( 0x00101000 )	/* VMC address register */
-#define _VMCDR		_SA1101( 0x00101400 )	/* VMC data register */
-
-#if LANGUAGE == C
-#define VMCCR		(*((volatile Word *) SA1101_p2v (_VMCCR)))
-#define VMCAR		(*((volatile Word *) SA1101_p2v (_VMCAR)))
-#define VMCDR		(*((volatile Word *) SA1101_p2v (_VMCDR)))
-
-#define VMCCR_RefreshEn	    0x0000	  /* Enable memory refresh */
-#define VMCCR_Config	    0x0001	  /* DRAM size */
-#define VMCCR_RefPeriod	    Fld(2,3)	  /* Refresh period */
-#define VMCCR_StaleDataWait Fld(4,5)	  /* Stale FIFO data timeout counter */
-#define VMCCR_SleepState    (1<<9)	  /* State of interface pins in sleep*/
-#define VMCCR_RefTest	    (1<<10)	  /* refresh test */
-#define VMCCR_RefLow	    Fld(6,11)	  /* refresh low counter */
-#define VMCCR_RefHigh	    Fld(7,17)	  /* refresh high counter */
-#define VMCCR_SDTCTest	    Fld(7,24)	  /* stale data timeout counter */
-#define VMCCR_ForceSelfRef  (1<<31)	  /* Force self refresh */
-
-#endif LANGUAGE == C
-
-
-/* Update FIFO
- *
- * Registers
- *    UFCR	Update FIFO Control Register
- *    UFSR	Update FIFO Status Register
- *    UFLVLR	update FIFO level register
- *    UFDR	update FIFO data register
- */
-
-#define _UFCR	_SA1101(0x00120000)   /* Update FIFO Control Reg. */
-#define _UFSR	_SA1101(0x00120400)   /* Update FIFO Status Reg. */	
-#define _UFLVLR	_SA1101(0x00120800)   /* Update FIFO level reg. */
-#define _UFDR	_SA1101(0x00120c00)   /* Update FIFO data reg. */
-
-#if LANGUAGE == C
-
-#define UFCR 	(*((volatile Word *) SA1101_p2v (_UFCR)))
-#define UFSR	(*((volatile Word *) SA1101_p2v (_UFSR)))
-#define UFLVLR	(*((volatile Word *) SA1101_p2v (_UFLVLR))) 
-#define UFDR	(*((volatile Word *) SA1101_p2v (_UFDR)))
-
-
-#define UFCR_FifoThreshhold	Fld(7,0)	/* Level for FifoGTn flag */
-
-#define UFSR_FifoGTnFlag	0x01		/* FifoGTn flag */#define UFSR_FifoEmpty		0x80		/* FIFO is empty */
-
-#endif /* LANGUAGE == C */
-
-/* System Controller
- *
- * Registers
- *    SKPCR	Power Control Register
- *    SKCDR	Clock Divider Register
- *    DACDR1	DAC1 Data register
- *    DACDR2	DAC2 Data register
- */
-
-#define _SKPCR		_SA1101(0x00000400)
-#define _SKCDR		_SA1101(0x00040000)
-#define _DACDR1		_SA1101(0x00060000)
-#define _DACDR2		_SA1101(0x00060400)
-
-#if LANGUAGE == C
-#define SKPCR 	(*((volatile Word *) SA1101_p2v (_SKPCR)))
-#define SKCDR	(*((volatile Word *) SA1101_p2v (_SKCDR)))
-#define DACDR1	(*((volatile Word *) SA1101_p2v (_DACDR1)))
-#define DACDR2	(*((volatile Word *) SA1101_p2v (_DACDR2)))
-
-#define SKPCR_UCLKEn	     0x01    /* USB Enable */
-#define SKPCR_PCLKEn	     0x02    /* PS/2 Enable */
-#define SKPCR_ICLKEn	     0x04    /* Interrupt Controller Enable */
-#define SKPCR_VCLKEn	     0x08    /* Video Controller Enable */
-#define SKPCR_PICLKEn	     0x10    /* parallel port Enable */
-#define SKPCR_DCLKEn	     0x20    /* DACs Enable */
-#define SKPCR_nKPADEn	     0x40    /* Multiplexer */
-
-#define SKCDR_PLLMul	     Fld(7,0)	/* PLL Multiplier */
-#define SKCDR_VCLKEn	     Fld(2,7)	/* Video controller clock divider */
-#define SKDCR_BCLKEn	     (1<<9)	/* BCLK Divider */
-#define SKDCR_UTESTCLKEn     (1<<10)	/* Route USB clock during test mode */
-#define SKDCR_DivRValue	     Fld(6,11)	/* Input clock divider for PLL */
-#define SKDCR_DivNValue	     Fld(5,17)	/* Output clock divider for PLL */
-#define SKDCR_PLLRSH	     Fld(3,22)	/* PLL bandwidth control */
-#define SKDCR_ChargePump     (1<<25)	/* Charge pump control */
-#define SKDCR_ClkTestMode    (1<<26)	/* Clock output test mode */
-#define SKDCR_ClkTestEn	     (1<<27)	/* Test clock generator */
-#define SKDCR_ClkJitterCntl  Fld(3,28)	/* video clock jitter compensation */
-
-#define DACDR_DACCount	     Fld(8,0)	/* Count value */
-#define DACDR1_DACCount	     DACDR_DACCount
-#define DACDR2_DACCount	     DACDR_DACCount
-
-#endif /* LANGUAGE == C */
-
-/*
- * Parallel Port Interface
- *
- * Registers
- *    IEEE_Config	IEEE mode selection and programmable attributes
- *    IEEE_Control	Controls the states of IEEE port control outputs
- *    IEEE_Data		Forward transfer data register
- *    IEEE_Addr		Forward transfer address register
- *    IEEE_Status	Port IO signal status register
- *    IEEE_IntStatus	Port interrupts status register
- *    IEEE_FifoLevels   Rx and Tx FIFO interrupt generation levels
- *    IEEE_InitTime	Forward timeout counter initial value
- *    IEEE_TimerStatus	Forward timeout counter current value
- *    IEEE_FifoReset	Reset forward transfer FIFO
- *    IEEE_ReloadValue	Counter reload value
- *    IEEE_TestControl	Control testmode
- *    IEEE_TestDataIn	Test data register
- *    IEEE_TestDataInEn	Enable test data
- *    IEEE_TestCtrlIn	Test control signals
- *    IEEE_TestCtrlInEn	Enable test control signals
- *    IEEE_TestDataStat	Current data bus value
- *
- */
-
-/*
- * The control registers are defined as offsets from a base address 
- */
- 
-#define _IEEE( x ) _SA1101( (x) + __PARALLEL_PORT )
-
-#define _IEEE_Config	    _IEEE( 0x0000 )
-#define _IEEE_Control	    _IEEE( 0x0400 )
-#define _IEEE_Data	    _IEEE( 0x4000 )
-#define _IEEE_Addr	    _IEEE( 0x0800 )
-#define _IEEE_Status	    _IEEE( 0x0c00 )
-#define _IEEE_IntStatus	    _IEEE( 0x1000 )
-#define _IEEE_FifoLevels    _IEEE( 0x1400 )
-#define _IEEE_InitTime	    _IEEE( 0x1800 )
-#define _IEEE_TimerStatus   _IEEE( 0x1c00 )
-#define _IEEE_FifoReset	    _IEEE( 0x2000 )
-#define _IEEE_ReloadValue   _IEEE( 0x3c00 )
-#define _IEEE_TestControl   _IEEE( 0x2400 )
-#define _IEEE_TestDataIn    _IEEE( 0x2800 )
-#define _IEEE_TestDataInEn  _IEEE( 0x2c00 )
-#define _IEEE_TestCtrlIn    _IEEE( 0x3000 )
-#define _IEEE_TestCtrlInEn  _IEEE( 0x3400 )
-#define _IEEE_TestDataStat  _IEEE( 0x3800 )
- 
-
-#if LANGUAGE == C
-#define IEEE_Config	    (*((volatile Word *) SA1101_p2v (_IEEE_Config)))
-#define IEEE_Control	    (*((volatile Word *) SA1101_p2v (_IEEE_Control)))
-#define IEEE_Data	    (*((volatile Word *) SA1101_p2v (_IEEE_Data)))
-#define IEEE_Addr	    (*((volatile Word *) SA1101_p2v (_IEEE_Addr)))
-#define IEEE_Status	    (*((volatile Word *) SA1101_p2v (_IEEE_Status)))
-#define IEEE_IntStatus	    (*((volatile Word *) SA1101_p2v (_IEEE_IntStatus)))
-#define IEEE_FifoLevels	    (*((volatile Word *) SA1101_p2v (_IEEE_FifoLevels)))
-#define IEEE_InitTime	    (*((volatile Word *) SA1101_p2v (_IEEE_InitTime)))
-#define IEEE_TimerStatus    (*((volatile Word *) SA1101_p2v (_IEEE_TimerStatus)))
-#define IEEE_FifoReset	    (*((volatile Word *) SA1101_p2v (_IEEE_FifoReset)))
-#define IEEE_ReloadValue    (*((volatile Word *) SA1101_p2v (_IEEE_ReloadValue)))
-#define IEEE_TestControl    (*((volatile Word *) SA1101_p2v (_IEEE_TestControl)))
-#define IEEE_TestDataIn     (*((volatile Word *) SA1101_p2v (_IEEE_TestDataIn)))
-#define IEEE_TestDataInEn   (*((volatile Word *) SA1101_p2v (_IEEE_TestDataInEn)))
-#define IEEE_TestCtrlIn     (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlIn)))
-#define IEEE_TestCtrlInEn   (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlInEn)))
-#define IEEE_TestDataStat   (*((volatile Word *) SA1101_p2v (_IEEE_TestDataStat)))
-
-
-#define IEEE_Config_M	    Fld(3,0)	 /* Mode select */
-#define IEEE_Config_D	    0x04	 /* FIFO access enable */
-#define IEEE_Config_B	    0x08	 /* 9-bit word enable */
-#define IEEE_Config_T	    0x10	 /* Data transfer enable */
-#define IEEE_Config_A	    0x20	 /* Data transfer direction */
-#define IEEE_Config_E	    0x40	 /* Timer enable */
-#define IEEE_Control_A	    0x08	 /* AutoFd output */
-#define IEEE_Control_E	    0x04	 /* Selectin output */
-#define IEEE_Control_T	    0x02	 /* Strobe output */
-#define IEEE_Control_I	    0x01	 /* Port init output */
-#define IEEE_Data_C	    (1<<31)	 /* Byte count */
-#define IEEE_Data_Db	    Fld(9,16)	 /* Data byte 2 */
-#define IEEE_Data_Da	    Fld(9,0)	 /* Data byte 1 */
-#define IEEE_Addr_A	    Fld(8,0)	 /* forward address transfer byte */
-#define IEEE_Status_A	    0x0100	 /* nAutoFd port output status */
-#define IEEE_Status_E	    0x0080	 /* nSelectIn port output status */
-#define IEEE_Status_T	    0x0040	 /* nStrobe port output status */
-#define IEEE_Status_I	    0x0020	 /* nInit port output status */
-#define IEEE_Status_B	    0x0010	 /* Busy port inout status */
-#define IEEE_Status_S	    0x0008	 /* Select port input status */
-#define IEEE_Status_K	    0x0004	 /* nAck port input status */
-#define IEEE_Status_F	    0x0002	 /* nFault port input status */
-#define IEEE_Status_R	    0x0001	 /* pError port input status */
-
-#define IEEE_IntStatus_IntReqDat	 0x0100
-#define IEEE_IntStatus_IntReqEmp	 0x0080
-#define IEEE_IntStatus_IntReqInt	 0x0040
-#define IEEE_IntStatus_IntReqRav	 0x0020
-#define IEEE_IntStatus_IntReqTim	 0x0010
-#define IEEE_IntStatus_RevAddrComp	 0x0008
-#define IEEE_IntStatus_RevDataComp	 0x0004
-#define IEEE_IntStatus_FwdAddrComp	 0x0002
-#define IEEE_IntStatus_FwdDataComp	 0x0001
-#define IEEE_FifoLevels_RevFifoLevel	 2
-#define IEEE_FifoLevels_FwdFifoLevel	 1
-#define IEEE_InitTime_TimValInit	 Fld(22,0)
-#define IEEE_TimerStatus_TimValStat	 Fld(22,0)
-#define IEEE_ReloadValue_Reload		 Fld(4,0)
-
-#define IEEE_TestControl_RegClk		 0x04
-#define IEEE_TestControl_ClockSelect	 Fld(2,1)
-#define IEEE_TestControl_TimerTestModeEn 0x01
-#define IEEE_TestCtrlIn_PError		 0x10
-#define IEEE_TestCtrlIn_nFault		 0x08
-#define IEEE_TestCtrlIn_nAck		 0x04
-#define IEEE_TestCtrlIn_PSel		 0x02
-#define IEEE_TestCtrlIn_Busy		 0x01
-
-#endif /* LANGUAGE == C */
-
-/*
- * VGA Controller
- *
- * Registers
- *    VideoControl	Video Control Register
- *    VgaTiming0	VGA Timing Register 0
- *    VgaTiming1	VGA Timing Register 1
- *    VgaTiming2	VGA Timing Register 2
- *    VgaTiming3	VGA Timing Register 3
- *    VgaBorder		VGA Border Color Register
- *    VgaDBAR		VGADMA Base Address Register
- *    VgaDCAR		VGADMA Channel Current Address Register
- *    VgaStatus		VGA Status Register
- *    VgaInterruptMask	VGA Interrupt Mask Register
- *    VgaPalette	VGA Palette Registers
- *    DacControl	DAC Control Register
- *    VgaTest		VGA Controller Test Register
- */
-
-#define _VGA( x )	_SA1101( ( x ) + __VGA_CONTROL )
-
-#define _VideoControl	    _VGA( 0x0000 )
-#define _VgaTiming0	    _VGA( 0x0400 )
-#define _VgaTiming1	    _VGA( 0x0800 )
-#define _VgaTiming2	    _VGA( 0x0c00 )
-#define _VgaTiming3	    _VGA( 0x1000 )
-#define _VgaBorder	    _VGA( 0x1400 )
-#define _VgaDBAR	    _VGA( 0x1800 )
-#define _VgaDCAR	    _VGA( 0x1c00 )
-#define _VgaStatus	    _VGA( 0x2000 )
-#define _VgaInterruptMask   _VGA( 0x2400 )
-#define _VgaPalette	    _VGA( 0x40000 )
-#define _DacControl	    _VGA( 0x3000 )
-#define _VgaTest	    _VGA( 0x2c00 )
-
-#if (LANGUAGE == C)
-#define VideoControl   (*((volatile Word *) SA1101_p2v (_VideoControl)))
-#define VgaTiming0     (*((volatile Word *) SA1101_p2v (_VgaTiming0)))
-#define VgaTiming1     (*((volatile Word *) SA1101_p2v (_VgaTiming1)))
-#define VgaTiming2     (*((volatile Word *) SA1101_p2v (_VgaTiming2)))
-#define VgaTiming3     (*((volatile Word *) SA1101_p2v (_VgaTiming3)))
-#define VgaBorder      (*((volatile Word *) SA1101_p2v (_VgaBorder)))
-#define VgaDBAR	       (*((volatile Word *) SA1101_p2v (_VgaDBAR)))
-#define VgaDCAR	       (*((volatile Word *) SA1101_p2v (_VgaDCAR)))
-#define VgaStatus      (*((volatile Word *) SA1101_p2v (_VgaStatus)))
-#define VgaInterruptMask (*((volatile Word *) SA1101_p2v (_VgaInterruptMask)))
-#define VgaPalette     (*((volatile Word *) SA1101_p2v (_VgaPalette)))
-#define DacControl     (*((volatile Word *) SA1101_p2v (_DacControl)))
-#define VgaTest        (*((volatile Word *) SA1101_p2v (_VgaTest)))
-
-#define VideoControl_VgaEn    0x00000000
-#define VideoControl_BGR      0x00000001
-#define VideoControl_VCompVal Fld(2,2)
-#define VideoControl_VgaReq   Fld(4,4)
-#define VideoControl_VBurstL  Fld(4,8)
-#define VideoControl_VMode    (1<<12)
-#define VideoControl_PalRead  (1<<13)
-
-#define VgaTiming0_PPL	      Fld(6,2)
-#define VgaTiming0_HSW	      Fld(8,8)
-#define VgaTiming0_HFP	      Fld(8,16)
-#define VgaTiming0_HBP	      Fld(8,24)
-
-#define VgaTiming1_LPS	      Fld(10,0)
-#define VgaTiming1_VSW	      Fld(6,10)
-#define VgaTiming1_VFP	      Fld(8,16)
-#define VgaTiming1_VBP	      Fld(8,24)
-
-#define VgaTiming2_IVS	      0x01
-#define VgaTiming2_IHS	      0x02
-#define VgaTiming2_CVS	      0x04
-#define VgaTiming2_CHS	      0x08
-
-#define VgaTiming3_HBS	      Fld(8,0)
-#define VgaTiming3_HBE	      Fld(8,8)
-#define VgaTiming3_VBS	      Fld(8,16)
-#define VgaTiming3_VBE	      Fld(8,24)
-
-#define VgaBorder_BCOL	      Fld(24,0)
-
-#define VgaStatus_VFUF	      0x01
-#define VgaStatus_VNext	      0x02
-#define VgaStatus_VComp	      0x04
-
-#define VgaInterruptMask_VFUFMask   0x00
-#define VgaInterruptMask_VNextMask  0x01
-#define VgaInterruptMask_VCompMask  0x02
-
-#define VgaPalette_R	      Fld(8,0)
-#define VgaPalette_G	      Fld(8,8)
-#define VgaPalette_B	      Fld(8,16)
-
-#define DacControl_DACON      0x0001
-#define DacControl_COMPON     0x0002
-#define DacControl_PEDON      0x0004
-#define DacControl_RTrim      Fld(5,4)
-#define DacControl_GTrim      Fld(5,9)
-#define DacControl_BTrim      Fld(5,14)
-
-#define VgaTest_TDAC	      0x00
-#define VgaTest_Datatest      Fld(4,1)
-#define VgaTest_DACTESTDAC    0x10
-#define VgaTest_DACTESTOUT    Fld(3,5)
-
-#endif /* LANGUAGE == C */
-
-/*
- * USB Host Interface Controller
- *
- * Registers
- *    Revision
- *    Control
- *    CommandStatus
- *    InterruptStatus
- *    InterruptEnable
- *    HCCA
- *    PeriodCurrentED
- *    ControlHeadED
- *    BulkHeadED
- *    BulkCurrentED
- *    DoneHead
- *    FmInterval
- *    FmRemaining
- *    FmNumber
- *    PeriodicStart
- *    LSThreshold
- *    RhDescriptorA
- *    RhDescriptorB
- *    RhStatus
- *    RhPortStatus
- *    USBStatus
- *    USBReset
- *    USTAR
- *    USWER
- *    USRFR
- *    USNFR
- *    USTCSR
- *    USSR
- *    
- */
-
-#define _USB( x )	_SA1101( ( x ) + __USB_CONTROL )
-
-
-#define _Revision	  _USB( 0x0000 )
-#define _Control	  _USB( 0x0888 )
-#define _CommandStatus	  _USB( 0x0c00 )
-#define _InterruptStatus  _USB( 0x1000 )
-#define _InterruptEnable  _USB( 0x1400 )
-#define _HCCA		  _USB( 0x1800 )
-#define _PeriodCurrentED  _USB( 0x1c00 )
-#define _ControlHeadED	  _USB( 0x2000 )
-#define _BulkHeadED	  _USB( 0x2800 )
-#define _BulkCurrentED	  _USB( 0x2c00 )
-#define _DoneHead	  _USB( 0x3000 )
-#define _FmInterval	  _USB( 0x3400 )
-#define _FmRemaining	  _USB( 0x3800 )
-#define _FmNumber	  _USB( 0x3c00 )
-#define _PeriodicStart	  _USB( 0x4000 )
-#define _LSThreshold	  _USB( 0x4400 )
-#define _RhDescriptorA	  _USB( 0x4800 )
-#define _RhDescriptorB	  _USB( 0x4c00 )
-#define _RhStatus	  _USB( 0x5000 )
-#define _RhPortStatus	  _USB( 0x5400 )
-#define _USBStatus	  _USB( 0x11800 )
-#define _USBReset	  _USB( 0x11c00 )
-
-#define _USTAR		  _USB( 0x10400 )
-#define _USWER		  _USB( 0x10800 )
-#define _USRFR		  _USB( 0x10c00 )
-#define _USNFR		  _USB( 0x11000 )
-#define _USTCSR		  _USB( 0x11400 )
-#define _USSR		  _USB( 0x11800 )
-
-
-#if (LANGUAGE == C)
-
-#define Revision	(*((volatile Word *) SA1101_p2v (_Revision)))
-#define Control		(*((volatile Word *) SA1101_p2v (_Control)))
-#define CommandStatus	(*((volatile Word *) SA1101_p2v (_CommandStatus)))
-#define InterruptStatus	(*((volatile Word *) SA1101_p2v (_InterruptStatus)))
-#define InterruptEnable	(*((volatile Word *) SA1101_p2v (_InterruptEnable)))
-#define HCCA		(*((volatile Word *) SA1101_p2v (_HCCA)))
-#define PeriodCurrentED	(*((volatile Word *) SA1101_p2v (_PeriodCurrentED)))
-#define ControlHeadED	(*((volatile Word *) SA1101_p2v (_ControlHeadED)))
-#define BulkHeadED	(*((volatile Word *) SA1101_p2v (_BulkHeadED)))
-#define BulkCurrentED	(*((volatile Word *) SA1101_p2v (_BulkCurrentED)))
-#define DoneHead	(*((volatile Word *) SA1101_p2v (_DoneHead)))
-#define FmInterval	(*((volatile Word *) SA1101_p2v (_FmInterval)))
-#define FmRemaining	(*((volatile Word *) SA1101_p2v (_FmRemaining)))
-#define FmNumber	(*((volatile Word *) SA1101_p2v (_FmNumber)))
-#define PeriodicStart	(*((volatile Word *) SA1101_p2v (_PeriodicStart)))
-#define LSThreshold	(*((volatile Word *) SA1101_p2v (_LSThreshold)))
-#define RhDescriptorA	(*((volatile Word *) SA1101_p2v (_RhDescriptorA)))
-#define RhDescriptorB	(*((volatile Word *) SA1101_p2v (_RhDescriptorB)))
-#define RhStatus	(*((volatile Word *) SA1101_p2v (_RhStatus)))
-#define RhPortStatus	(*((volatile Word *) SA1101_p2v (_RhPortStatus)))
-#define USBStatus	(*((volatile Word *) SA1101_p2v (_USBStatus)))
-#define USBReset	(*((volatile Word *) SA1101_p2v (_USBReset)))
-#define USTAR		(*((volatile Word *) SA1101_p2v (_USTAR)))
-#define USWER		(*((volatile Word *) SA1101_p2v (_USWER)))
-#define USRFR		(*((volatile Word *) SA1101_p2v (_USRFR)))
-#define USNFR		(*((volatile Word *) SA1101_p2v (_USNFR)))
-#define USTCSR		(*((volatile Word *) SA1101_p2v (_USTCSR)))
-#define USSR		(*((volatile Word *) SA1101_p2v (_USSR)))
-
-
-#define USBStatus_IrqHciRmtWkp	     (1<<7)
-#define USBStatus_IrqHciBuffAcc	     (1<<8)
-#define USBStatus_nIrqHciM	     (1<<9)
-#define USBStatus_nHciMFClr	     (1<<10)
-
-#define USBReset_ForceIfReset	     0x01
-#define USBReset_ForceHcReset	     0x02
-#define USBReset_ClkGenReset	     0x04
-
-#define USTCR_RdBstCntrl	     Fld(3,0)
-#define USTCR_ByteEnable	     Fld(4,3)
-#define USTCR_WriteEn		     (1<<7)
-#define USTCR_FifoCir		     (1<<8)
-#define USTCR_TestXferSel	     (1<<9)
-#define USTCR_FifoCirAtEnd	     (1<<10)
-#define USTCR_nSimScaleDownClk	     (1<<11)
-
-#define USSR_nAppMDEmpty	     0x01
-#define USSR_nAppMDFirst	     0x02
-#define USSR_nAppMDLast		     0x04
-#define USSR_nAppMDFull		     0x08
-#define USSR_nAppMAFull		     0x10
-#define USSR_XferReq		     0x20
-#define USSR_XferEnd		     0x40
-
-#endif /* LANGUAGE == C */
-
-
-/*
- * Interrupt Controller
- *
- * Registers
- *    INTTEST0		Test register 0
- *    INTTEST1		Test register 1
- *    INTENABLE0	Interrupt Enable register 0
- *    INTENABLE1	Interrupt Enable register 1
- *    INTPOL0		Interrupt Polarity selection 0
- *    INTPOL1		Interrupt Polarity selection 1
- *    INTTSTSEL		Interrupt source selection
- *    INTSTATCLR0	Interrupt Status 0
- *    INTSTATCLR1	Interrupt Status 1
- *    INTSET0		Interrupt Set 0
- *    INTSET1		Interrupt Set 1
- */
-
-#define _INT( x )	_SA1101( ( x ) + __INTERRUPT_CONTROL)
-
-#define _INTTEST0	_INT( 0x1000 )
-#define _INTTEST1	_INT( 0x1400 )
-#define _INTENABLE0	_INT( 0x2000 )
-#define _INTENABLE1	_INT( 0x2400 )
-#define _INTPOL0	_INT( 0x3000 )
-#define _INTPOL1	_INT( 0x3400 )
-#define _INTTSTSEL     	_INT( 0x5000 )
-#define _INTSTATCLR0	_INT( 0x6000 )
-#define _INTSTATCLR1	_INT( 0x6400 )
-#define _INTSET0	_INT( 0x7000 )
-#define _INTSET1	_INT( 0x7400 )
-
-#if ( LANGUAGE == C )
-#define INTTEST0	(*((volatile Word *) SA1101_p2v (_INTTEST0)))
-#define INTTEST1	(*((volatile Word *) SA1101_p2v (_INTTEST1)))
-#define INTENABLE0	(*((volatile Word *) SA1101_p2v (_INTENABLE0)))
-#define INTENABLE1	(*((volatile Word *) SA1101_p2v (_INTENABLE1)))
-#define INTPOL0		(*((volatile Word *) SA1101_p2v (_INTPOL0)))
-#define INTPOL1		(*((volatile Word *) SA1101_p2v (_INTPOL1)))
-#define INTTSTSEL	(*((volatile Word *) SA1101_p2v (_INTTSTSEL)))
-#define INTSTATCLR0	(*((volatile Word *) SA1101_p2v (_INTSTATCLR0)))
-#define INTSTATCLR1	(*((volatile Word *) SA1101_p2v (_INTSTATCLR1)))
-#define INTSET0		(*((volatile Word *) SA1101_p2v (_INTSET0)))
-#define INTSET1		(*((volatile Word *) SA1101_p2v (_INTSET1)))
-
-#endif /* LANGUAGE == C */
-
-/*
- * PS/2 Trackpad and Mouse Interfaces
- *
- * Registers   (prefix kbd applies to trackpad interface, mse to mouse)
- *    KBDCR		Control Register
- *    KBDSTAT		Status Register
- *    KBDDATA		Transmit/Receive Data register
- *    KBDCLKDIV		Clock Division Register
- *    KBDPRECNT		Clock Precount Register
- *    KBDTEST1		Test register 1
- *    KBDTEST2		Test register 2
- *    KBDTEST3		Test register 3
- *    KBDTEST4		Test register 4
- *    MSECR	
- *    MSESTAT
- *    MSEDATA
- *    MSECLKDIV
- *    MSEPRECNT
- *    MSETEST1
- *    MSETEST2
- *    MSETEST3
- *    MSETEST4
- *     
- */
-
-#define _KBD( x )	_SA1101( ( x ) + __TRACK_INTERFACE )
-#define _MSE( x )	_SA1101( ( x ) + __MOUSE_INTERFACE )
-
-#define _KBDCR		_KBD( 0x0000 )
-#define _KBDSTAT	_KBD( 0x0400 )
-#define _KBDDATA	_KBD( 0x0800 )
-#define _KBDCLKDIV	_KBD( 0x0c00 )
-#define _KBDPRECNT	_KBD( 0x1000 )
-#define	_KBDTEST1	_KBD( 0x2000 )
-#define _KBDTEST2	_KBD( 0x2400 )
-#define _KBDTEST3	_KBD( 0x2800 )
-#define _KBDTEST4	_KBD( 0x2c00 )
-#define _MSECR		_MSE( 0x0000 )
-#define _MSESTAT	_MSE( 0x0400 )
-#define _MSEDATA	_MSE( 0x0800 )
-#define _MSECLKDIV	_MSE( 0x0c00 )
-#define _MSEPRECNT	_MSE( 0x1000 )
-#define	_MSETEST1	_MSE( 0x2000 )
-#define _MSETEST2	_MSE( 0x2400 )
-#define _MSETEST3	_MSE( 0x2800 )
-#define _MSETEST4	_MSE( 0x2c00 )
-
-#if ( LANGUAGE == C )
-
-#define KBDCR	    (*((volatile Word *) SA1101_p2v (_KBDCR)))
-#define KBDSTAT	    (*((volatile Word *) SA1101_p2v (_KBDSTAT)))
-#define KBDDATA	    (*((volatile Word *) SA1101_p2v (_KBDDATA)))
-#define KBDCLKDIV   (*((volatile Word *) SA1101_p2v (_KBDCLKDIV)))
-#define KBDPRECNT   (*((volatile Word *) SA1101_p2v (_KBDPRECNT)))
-#define KBDTEST1    (*((volatile Word *) SA1101_p2v (_KBDTEST1)))
-#define KBDTEST2    (*((volatile Word *) SA1101_p2v (_KBDTEST2)))
-#define KBDTEST3    (*((volatile Word *) SA1101_p2v (_KBDTEST3)))
-#define KBDTEST4    (*((volatile Word *) SA1101_p2v (_KBDTEST4)))
-#define MSECR	    (*((volatile Word *) SA1101_p2v (_MSECR)))
-#define MSESTAT	    (*((volatile Word *) SA1101_p2v (_MSESTAT)))
-#define MSEDATA	    (*((volatile Word *) SA1101_p2v (_MSEDATA)))
-#define MSECLKDIV   (*((volatile Word *) SA1101_p2v (_MSECLKDIV)))
-#define MSEPRECNT   (*((volatile Word *) SA1101_p2v (_MSEPRECNT)))
-#define MSETEST1    (*((volatile Word *) SA1101_p2v (_MSETEST1)))
-#define MSETEST2    (*((volatile Word *) SA1101_p2v (_MSETEST2)))
-#define MSETEST3    (*((volatile Word *) SA1101_p2v (_MSETEST3)))
-#define MSETEST4    (*((volatile Word *) SA1101_p2v (_MSETEST4)))
-
-
-#define KBDCR_ENA		 0x08
-#define KBDCR_FKD		 0x02
-#define KBDCR_FKC		 0x01
-
-#define KBDSTAT_TXE		 0x80
-#define KBDSTAT_TXB		 0x40
-#define KBDSTAT_RXF		 0x20
-#define KBDSTAT_RXB		 0x10
-#define KBDSTAT_ENA		 0x08
-#define KBDSTAT_RXP		 0x04
-#define KBDSTAT_KBD		 0x02
-#define KBDSTAT_KBC		 0x01
-
-#define KBDCLKDIV_DivVal	 Fld(4,0)
-
-#define MSECR_ENA		 0x08
-#define MSECR_FKD		 0x02
-#define MSECR_FKC		 0x01
-
-#define MSESTAT_TXE		 0x80
-#define MSESTAT_TXB		 0x40
-#define MSESTAT_RXF		 0x20
-#define MSESTAT_RXB		 0x10
-#define MSESTAT_ENA		 0x08
-#define MSESTAT_RXP		 0x04	
-#define MSESTAT_MSD		 0x02
-#define MSESTAT_MSC		 0x01
-
-#define MSECLKDIV_DivVal	 Fld(4,0)
-
-#define KBDTEST1_CD		 0x80
-#define KBDTEST1_RC1		 0x40
-#define KBDTEST1_MC		 0x20
-#define KBDTEST1_C		 Fld(2,3)
-#define KBDTEST1_T2		 0x40
-#define KBDTEST1_T1		 0x20
-#define KBDTEST1_T0		 0x10
-#define KBDTEST2_TICBnRES	 0x08
-#define KBDTEST2_RKC		 0x04
-#define KBDTEST2_RKD		 0x02
-#define KBDTEST2_SEL		 0x01
-#define KBDTEST3_ms_16		 0x80
-#define KBDTEST3_us_64		 0x40
-#define KBDTEST3_us_16		 0x20
-#define KBDTEST3_DIV8		 0x10
-#define KBDTEST3_DIn		 0x08
-#define KBDTEST3_CIn		 0x04
-#define KBDTEST3_KD		 0x02
-#define KBDTEST3_KC		 0x01
-#define KBDTEST4_BC12		 0x80
-#define KBDTEST4_BC11		 0x40
-#define KBDTEST4_TRES		 0x20
-#define KBDTEST4_CLKOE		 0x10
-#define KBDTEST4_CRES		 0x08
-#define KBDTEST4_RXB		 0x04
-#define KBDTEST4_TXB		 0x02
-#define KBDTEST4_SRX		 0x01
-
-#define MSETEST1_CD		 0x80
-#define MSETEST1_RC1		 0x40
-#define MSETEST1_MC		 0x20
-#define MSETEST1_C		 Fld(2,3)
-#define MSETEST1_T2		 0x40
-#define MSETEST1_T1		 0x20
-#define MSETEST1_T0		 0x10
-#define MSETEST2_TICBnRES	 0x08
-#define MSETEST2_RKC		 0x04
-#define MSETEST2_RKD		 0x02
-#define MSETEST2_SEL		 0x01
-#define MSETEST3_ms_16		 0x80
-#define MSETEST3_us_64		 0x40
-#define MSETEST3_us_16		 0x20
-#define MSETEST3_DIV8		 0x10
-#define MSETEST3_DIn		 0x08
-#define MSETEST3_CIn		 0x04
-#define MSETEST3_KD		 0x02
-#define MSETEST3_KC		 0x01
-#define MSETEST4_BC12		 0x80
-#define MSETEST4_BC11		 0x40
-#define MSETEST4_TRES		 0x20
-#define MSETEST4_CLKOE		 0x10
-#define MSETEST4_CRES		 0x08
-#define MSETEST4_RXB		 0x04
-#define MSETEST4_TXB		 0x02
-#define MSETEST4_SRX		 0x01
-
-#endif  /* LANGUAGE == C */
-
-
-/*
- * General-Purpose I/O Interface
- *
- * Registers
- *    PADWR	Port A Data Write Register
- *    PBDWR	Port B Data Write Register
- *    PADRR	Port A Data Read Register
- *    PBDRR	Port B Data Read Register
- *    PADDR	Port A Data Direction Register
- *    PBDDR	Port B Data Direction Register
- *    PASSR	Port A Sleep State Register
- *    PBSSR	Port B Sleep State Register
- *
- */
-
-#define _PIO( x )      _SA1101( ( x ) + __GPIO_INTERFACE )
-
-#define _PADWR	       _PIO( 0x0000 )
-#define _PBDWR	       _PIO( 0x0400 )
-#define _PADRR	       _PIO( 0x0000 )
-#define _PBDRR	       _PIO( 0x0400 )
-#define _PADDR	       _PIO( 0x0800 )
-#define _PBDDR	       _PIO( 0x0c00 )
-#define _PASSR	       _PIO( 0x1000 )
-#define _PBSSR	       _PIO( 0x1400 )
-
-
-#if ( LANGUAGE == C )
-
-
-#define PADWR	    (*((volatile Word *) SA1101_p2v (_PADWR)))
-#define PBDWR	    (*((volatile Word *) SA1101_p2v (_PBDWR)))
-#define PADRR	    (*((volatile Word *) SA1101_p2v (_PADRR)))
-#define PBDRR	    (*((volatile Word *) SA1101_p2v (_PBDRR)))
-#define PADDR	    (*((volatile Word *) SA1101_p2v (_PADDR)))
-#define PBDDR	    (*((volatile Word *) SA1101_p2v (_PBDDR)))
-#define PASSR	    (*((volatile Word *) SA1101_p2v (_PASSR)))
-#define PBSSR	    (*((volatile Word *) SA1101_p2v (_PBSSR)))
-
-#endif
-
-
-
-/*
- * Keypad Interface
- *
- * Registers
- *    PXDWR
- *    PXDRR
- *    PYDWR
- *    PYDRR
- *
- */
-
-#define _KEYPAD( x )	_SA1101( ( x ) + __KEYPAD_INTERFACE ) 
-
-#define _PXDWR	   _KEYPAD( 0x0000 )
-#define _PXDRR	   _KEYPAD( 0x0000 )
-#define _PYDWR	   _KEYPAD( 0x0400 )
-#define _PYDRR	   _KEYPAD( 0x0400 )
-
-#if ( LANGUAGE == C )
-
-
-#define PXDWR	    (*((volatile Word *) SA1101_p2v (_PXDWR)))
-#define PXDRR	    (*((volatile Word *) SA1101_p2v (_PXDRR)))
-#define PYDWR	    (*((volatile Word *) SA1101_p2v (_PYDWR)))
-#define PYDRR	    (*((volatile Word *) SA1101_p2v (_PYDRR)))
-
-#endif
-
-
-
-/*
- * PCMCIA Interface
- *
- * Registers
- *    PCSR	Status Register
- *    PCCR	Control Register
- *    PCSSR	Sleep State Register
- *
- */
-
-#define _CARD( x )	_SA1101( ( x ) + __PCMCIA_INTERFACE )
-
-#define _PCSR	   _CARD( 0x0000 )
-#define _PCCR	   _CARD( 0x0400 )
-#define _PCSSR	   _CARD( 0x0800 )
-
-#if ( LANGUAGE == C )
-#define PCSR    (*((volatile Word *) SA1101_p2v (_PCSR)))
-#define PCCR	(*((volatile Word *) SA1101_p2v (_PCCR)))
-#define PCSSR	(*((volatile Word *) SA1101_p2v (_PCSSR)))
-
-#define PCSR_S0_ready		0x0001
-#define PCSR_S1_ready		0x0002
-#define PCSR_S0_detected	0x0004
-#define PCSR_S1_detected	0x0008
-#define PCSR_S0_VS1		0x0010
-#define PCSR_S0_VS2		0x0020
-#define PCSR_S1_VS1		0x0040
-#define PCSR_S1_VS2		0x0080
-#define PCSR_S0_WP		0x0100
-#define PCSR_S1_WP		0x0200
-#define PCSR_S0_BVD1_nSTSCHG	0x0400
-#define PCSR_S0_BVD2_nSPKR	0x0800
-#define PCSR_S1_BVD1_nSTSCHG	0x1000
-#define PCSR_S1_BVD2_nSPKR	0x2000
-
-#define PCCR_S0_VPP0		0x0001
-#define PCCR_S0_VPP1		0x0002
-#define PCCR_S0_VCC0		0x0004
-#define PCCR_S0_VCC1		0x0008
-#define PCCR_S1_VPP0		0x0010
-#define PCCR_S1_VPP1		0x0020
-#define PCCR_S1_VCC0		0x0040
-#define PCCR_S1_VCC1		0x0080
-#define PCCR_S0_reset		0x0100
-#define PCCR_S1_reset		0x0200
-#define PCCR_S0_float		0x0400
-#define PCCR_S1_float		0x0800
-
-#define PCSSR_S0_VCC0		0x0001
-#define PCSSR_S0_VCC1		0x0002
-#define PCSSR_S0_VPP0		0x0004
-#define PCSSR_S0_VPP1		0x0008
-#define PCSSR_S0_control	0x0010
-#define PCSSR_S1_VCC0		0x0020
-#define PCSSR_S1_VCC1		0x0040
-#define PCSSR_S1_VPP0		0x0080
-#define PCSSR_S1_VPP1		0x0100
-#define PCSSR_S1_control	0x0200
-
-#endif
-
-#undef C
-#undef Assembly
diff --git a/include/asm-arm/arch-sa1100/assabet.h b/include/asm-arm/arch-sa1100/assabet.h
deleted file mode 100644
index d6a1bb5..0000000
--- a/include/asm-arm/arch-sa1100/assabet.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/assabet.h
- *
- * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
- *
- * This file contains the hardware specific definitions for Assabet
- * Only include this file from SA1100-specific files.
- *
- * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
- *      Definitions for Neponset added.
- */
-#ifndef __ASM_ARCH_ASSABET_H
-#define __ASM_ARCH_ASSABET_H
-
-
-/* System Configuration Register flags */
-
-#define ASSABET_SCR_SDRAM_LOW	(1<<2)	/* SDRAM size (low bit) */
-#define ASSABET_SCR_SDRAM_HIGH	(1<<3)	/* SDRAM size (high bit) */
-#define ASSABET_SCR_FLASH_LOW	(1<<4)	/* Flash size (low bit) */
-#define ASSABET_SCR_FLASH_HIGH	(1<<5)	/* Flash size (high bit) */
-#define ASSABET_SCR_GFX		(1<<8)	/* Graphics Accelerator (0 = present) */
-#define ASSABET_SCR_SA1111	(1<<9)	/* Neponset (0 = present) */
-
-#define ASSABET_SCR_INIT	-1
-
-extern unsigned long SCR_value;
-
-#ifdef CONFIG_ASSABET_NEPONSET
-#define machine_has_neponset()  ((SCR_value & ASSABET_SCR_SA1111) == 0)
-#else
-#define machine_has_neponset()	(0)
-#endif
-
-/* Board Control Register */
-
-#define ASSABET_BCR_BASE  0xf1000000
-#define ASSABET_BCR (*(volatile unsigned int *)(ASSABET_BCR_BASE))
-
-#define ASSABET_BCR_CF_PWR	(1<<0)	/* Compact Flash Power (1 = 3.3v, 0 = off) */
-#define ASSABET_BCR_CF_RST	(1<<1)	/* Compact Flash Reset (1 = power up reset) */
-#define ASSABET_BCR_GFX_RST	(1<<1)	/* Graphics Accelerator Reset (0 = hold reset) */
-#define ASSABET_BCR_CODEC_RST	(1<<2)	/* 0 = Holds UCB1300, ADI7171, and UDA1341 in reset */
-#define ASSABET_BCR_IRDA_FSEL	(1<<3)	/* IRDA Frequency select (0 = SIR, 1 = MIR/ FIR) */
-#define ASSABET_BCR_IRDA_MD0	(1<<4)	/* Range/Power select */
-#define ASSABET_BCR_IRDA_MD1	(1<<5)	/* Range/Power select */
-#define ASSABET_BCR_STEREO_LB	(1<<6)	/* Stereo Loopback */
-#define ASSABET_BCR_CF_BUS_OFF	(1<<7)	/* Compact Flash bus (0 = on, 1 = off (float)) */
-#define ASSABET_BCR_AUDIO_ON	(1<<8)	/* Audio power on */
-#define ASSABET_BCR_LIGHT_ON	(1<<9)	/* Backlight */
-#define ASSABET_BCR_LCD_12RGB	(1<<10)	/* 0 = 16RGB, 1 = 12RGB */
-#define ASSABET_BCR_LCD_ON	(1<<11)	/* LCD power on */
-#define ASSABET_BCR_RS232EN	(1<<12)	/* RS232 transceiver enable */
-#define ASSABET_BCR_LED_RED	(1<<13)	/* D9 (0 = on, 1 = off) */
-#define ASSABET_BCR_LED_GREEN	(1<<14)	/* D8 (0 = on, 1 = off) */
-#define ASSABET_BCR_VIB_ON	(1<<15)	/* Vibration motor (quiet alert) */
-#define ASSABET_BCR_COM_DTR	(1<<16)	/* COMport Data Terminal Ready */
-#define ASSABET_BCR_COM_RTS	(1<<17)	/* COMport Request To Send */
-#define ASSABET_BCR_RAD_WU	(1<<18)	/* Radio wake up interrupt */
-#define ASSABET_BCR_SMB_EN	(1<<19)	/* System management bus enable */
-#define ASSABET_BCR_TV_IR_DEC	(1<<20)	/* TV IR Decode Enable (not implemented) */
-#define ASSABET_BCR_QMUTE	(1<<21)	/* Quick Mute */
-#define ASSABET_BCR_RAD_ON	(1<<22)	/* Radio Power On */
-#define ASSABET_BCR_SPK_OFF	(1<<23)	/* 1 = Speaker amplifier power off */
-
-#ifdef CONFIG_SA1100_ASSABET
-extern void ASSABET_BCR_frob(unsigned int mask, unsigned int set);
-#else
-#define ASSABET_BCR_frob(x,y)	do { } while (0)
-#endif
-
-#define ASSABET_BCR_set(x)	ASSABET_BCR_frob((x), (x))
-#define ASSABET_BCR_clear(x)	ASSABET_BCR_frob((x), 0)
-
-#define ASSABET_BSR_BASE	0xf1000000
-#define ASSABET_BSR (*(volatile unsigned int*)(ASSABET_BSR_BASE))
-
-#define ASSABET_BSR_RS232_VALID	(1 << 24)
-#define ASSABET_BSR_COM_DCD	(1 << 25)
-#define ASSABET_BSR_COM_CTS	(1 << 26)
-#define ASSABET_BSR_COM_DSR	(1 << 27)
-#define ASSABET_BSR_RAD_CTS	(1 << 28)
-#define ASSABET_BSR_RAD_DSR	(1 << 29)
-#define ASSABET_BSR_RAD_DCD	(1 << 30)
-#define ASSABET_BSR_RAD_RI	(1 << 31)
-
-
-/* GPIOs for which the generic definition doesn't say much */
-#define ASSABET_GPIO_RADIO_IRQ		GPIO_GPIO (14)	/* Radio interrupt request  */
-#define ASSABET_GPIO_PS_MODE_SYNC	GPIO_GPIO (16)	/* Power supply mode/sync   */
-#define ASSABET_GPIO_STEREO_64FS_CLK	GPIO_GPIO (19)	/* SSP UDA1341 clock input  */
-#define ASSABET_GPIO_CF_IRQ		GPIO_GPIO (21)	/* CF IRQ   */
-#define ASSABET_GPIO_CF_CD		GPIO_GPIO (22)	/* CF CD */
-#define ASSABET_GPIO_CF_BVD2		GPIO_GPIO (24)	/* CF BVD */
-#define ASSABET_GPIO_GFX_IRQ		GPIO_GPIO (24)	/* Graphics IRQ */
-#define ASSABET_GPIO_CF_BVD1		GPIO_GPIO (25)	/* CF BVD */
-#define ASSABET_GPIO_BATT_LOW		GPIO_GPIO (26)	/* Low battery */
-#define ASSABET_GPIO_RCLK		GPIO_GPIO (26)	/* CCLK/2  */
-
-#define ASSABET_IRQ_GPIO_CF_IRQ		IRQ_GPIO21
-#define ASSABET_IRQ_GPIO_CF_CD		IRQ_GPIO22
-#define ASSABET_IRQ_GPIO_CF_BVD2	IRQ_GPIO24
-#define ASSABET_IRQ_GPIO_CF_BVD1	IRQ_GPIO25
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/badge4.h b/include/asm-arm/arch-sa1100/badge4.h
deleted file mode 100644
index d93a9a8..0000000
--- a/include/asm-arm/arch-sa1100/badge4.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/badge4.h
- *
- *   Tim Connors <connors@hpl.hp.com>
- *   Christopher Hoover <ch@hpl.hp.com>
- *
- * Copyright (C) 2002 Hewlett-Packard Company
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#error "include <asm/arch/hardware.h> instead"
-#endif
-
-#define BADGE4_SA1111_BASE		(0x48000000)
-
-/* GPIOs on the BadgePAD 4 */
-#define BADGE4_GPIO_INT_1111		GPIO_GPIO0   /* SA-1111 IRQ */
-
-#define BADGE4_GPIO_INT_VID		GPIO_GPIO1   /* Video expansion */
-#define BADGE4_GPIO_LGP2		GPIO_GPIO2   /* GPIO_LDD8 */
-#define BADGE4_GPIO_LGP3		GPIO_GPIO3   /* GPIO_LDD9 */
-#define BADGE4_GPIO_LGP4		GPIO_GPIO4   /* GPIO_LDD10 */
-#define BADGE4_GPIO_LGP5		GPIO_GPIO5   /* GPIO_LDD11 */
-#define BADGE4_GPIO_LGP6		GPIO_GPIO6   /* GPIO_LDD12 */
-#define BADGE4_GPIO_LGP7		GPIO_GPIO7   /* GPIO_LDD13 */
-#define BADGE4_GPIO_LGP8		GPIO_GPIO8   /* GPIO_LDD14 */
-#define BADGE4_GPIO_LGP9		GPIO_GPIO9   /* GPIO_LDD15 */
-#define BADGE4_GPIO_GPA_VID		GPIO_GPIO10  /* Video expansion */
-#define BADGE4_GPIO_GPB_VID		GPIO_GPIO11  /* Video expansion */
-#define BADGE4_GPIO_GPC_VID		GPIO_GPIO12  /* Video expansion */
-
-#define BADGE4_GPIO_UART_HS1		GPIO_GPIO13
-#define BADGE4_GPIO_UART_HS2		GPIO_GPIO14
-
-#define BADGE4_GPIO_MUXSEL0		GPIO_GPIO15
-#define BADGE4_GPIO_TESTPT_J7		GPIO_GPIO16
-
-#define BADGE4_GPIO_SDSDA		GPIO_GPIO17  /* SDRAM SPD Data */
-#define BADGE4_GPIO_SDSCL		GPIO_GPIO18  /* SDRAM SPD Clock */
-#define BADGE4_GPIO_SDTYP0		GPIO_GPIO19  /* SDRAM Type Control */
-#define BADGE4_GPIO_SDTYP1		GPIO_GPIO20  /* SDRAM Type Control */
-
-#define BADGE4_GPIO_BGNT_1111		GPIO_GPIO21  /* GPIO_MBGNT */
-#define BADGE4_GPIO_BREQ_1111		GPIO_GPIO22  /* GPIO_TREQA */
-
-#define BADGE4_GPIO_TESTPT_J6		GPIO_GPIO23
-
-#define BADGE4_GPIO_PCMEN5V		GPIO_GPIO24  /* 5V power */
-
-#define BADGE4_GPIO_SA1111_NRST		GPIO_GPIO25  /* SA-1111 nRESET */
-
-#define BADGE4_GPIO_TESTPT_J5		GPIO_GPIO26
-
-#define BADGE4_GPIO_CLK_1111		GPIO_GPIO27  /* GPIO_32_768kHz */
-
-/* Interrupts on the BadgePAD 4 */
-#define BADGE4_IRQ_GPIO_SA1111		IRQ_GPIO0    /* SA-1111 interrupt */
-
-
-/* PCM5ENV Usage tracking */
-
-#define BADGE4_5V_PCMCIA_SOCK0		(1<<0)
-#define BADGE4_5V_PCMCIA_SOCK1		(1<<1)
-#define BADGE4_5V_PCMCIA_SOCK(n)	(1<<(n))
-#define BADGE4_5V_USB			(1<<2)
-#define BADGE4_5V_INITIALLY		(1<<3)
-
-#ifndef __ASSEMBLY__
-extern void badge4_set_5V(unsigned subsystem, int on);
-#endif
diff --git a/include/asm-arm/arch-sa1100/bitfield.h b/include/asm-arm/arch-sa1100/bitfield.h
deleted file mode 100644
index f1f0e338..0000000
--- a/include/asm-arm/arch-sa1100/bitfield.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- *	FILE    	bitfield.h
- *
- *	Version 	1.1
- *	Author  	Copyright (c) Marc A. Viredaz, 1998
- *	        	DEC Western Research Laboratory, Palo Alto, CA
- *	Date    	April 1998 (April 1997)
- *	System  	Advanced RISC Machine (ARM)
- *	Language	C or ARM Assembly
- *	Purpose 	Definition of macros to operate on bit fields.
- */
-
-
-
-#ifndef __BITFIELD_H
-#define __BITFIELD_H
-
-#ifndef __ASSEMBLY__
-#define UData(Data)	((unsigned long) (Data))
-#else
-#define UData(Data)	(Data)
-#endif
-
-
-/*
- * MACRO: Fld
- *
- * Purpose
- *    The macro "Fld" encodes a bit field, given its size and its shift value
- *    with respect to bit 0.
- *
- * Note
- *    A more intuitive way to encode bit fields would have been to use their
- *    mask. However, extracting size and shift value information from a bit
- *    field's mask is cumbersome and might break the assembler (255-character
- *    line-size limit).
- *
- * Input
- *    Size      	Size of the bit field, in number of bits.
- *    Shft      	Shift value of the bit field with respect to bit 0.
- *
- * Output
- *    Fld       	Encoded bit field.
- */
-
-#define Fld(Size, Shft)	(((Size) << 16) + (Shft))
-
-
-/*
- * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
- *
- * Purpose
- *    The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
- *    the size, shift value, mask, aligned mask, and first bit of a
- *    bit field.
- *
- * Input
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FSize     	Size of the bit field, in number of bits.
- *    FShft     	Shift value of the bit field with respect to bit 0.
- *    FMsk      	Mask for the bit field.
- *    FAlnMsk   	Mask for the bit field, aligned on bit 0.
- *    F1stBit   	First bit of the bit field.
- */
-
-#define FSize(Field)	((Field) >> 16)
-#define FShft(Field)	((Field) & 0x0000FFFF)
-#define FMsk(Field)	(((UData (1) << FSize (Field)) - 1) << FShft (Field))
-#define FAlnMsk(Field)	((UData (1) << FSize (Field)) - 1)
-#define F1stBit(Field)	(UData (1) << FShft (Field))
-
-
-/*
- * MACRO: FInsrt
- *
- * Purpose
- *    The macro "FInsrt" inserts a value into a bit field by shifting the
- *    former appropriately.
- *
- * Input
- *    Value     	Bit-field value.
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FInsrt    	Bit-field value positioned appropriately.
- */
-
-#define FInsrt(Value, Field) \
-                	(UData (Value) << FShft (Field))
-
-
-/*
- * MACRO: FExtr
- *
- * Purpose
- *    The macro "FExtr" extracts the value of a bit field by masking and
- *    shifting it appropriately.
- *
- * Input
- *    Data      	Data containing the bit-field to be extracted.
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FExtr     	Bit-field value.
- */
-
-#define FExtr(Data, Field) \
-                	((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
-
-
-#endif /* __BITFIELD_H */
diff --git a/include/asm-arm/arch-sa1100/cerf.h b/include/asm-arm/arch-sa1100/cerf.h
deleted file mode 100644
index 9a19c3d0..0000000
--- a/include/asm-arm/arch-sa1100/cerf.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * include/asm-arm/arch-sa1100/cerf.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Apr-2003 : Removed some old PDA crud [FB]
- */
-#ifndef _INCLUDE_CERF_H_
-#define _INCLUDE_CERF_H_
-
-
-#define CERF_ETH_IO			0xf0000000
-#define CERF_ETH_IRQ IRQ_GPIO26
-
-#define CERF_GPIO_CF_BVD2		GPIO_GPIO (19)
-#define CERF_GPIO_CF_BVD1		GPIO_GPIO (20)
-#define CERF_GPIO_CF_RESET		GPIO_GPIO (21)
-#define CERF_GPIO_CF_IRQ		GPIO_GPIO (22)
-#define CERF_GPIO_CF_CD			GPIO_GPIO (23)
-
-#define CERF_IRQ_GPIO_CF_BVD2		IRQ_GPIO19
-#define CERF_IRQ_GPIO_CF_BVD1		IRQ_GPIO20
-#define CERF_IRQ_GPIO_CF_IRQ		IRQ_GPIO22
-#define CERF_IRQ_GPIO_CF_CD		IRQ_GPIO23
-
-#endif // _INCLUDE_CERF_H_
diff --git a/include/asm-arm/arch-sa1100/collie.h b/include/asm-arm/arch-sa1100/collie.h
deleted file mode 100644
index 762eba53..0000000
--- a/include/asm-arm/arch-sa1100/collie.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/collie.h
- *
- * This file contains the hardware specific definitions for Assabet
- * Only include this file from SA1100-specific files.
- *
- * ChangeLog:
- *   04-06-2001 Lineo Japan, Inc.
- *   04-16-2001 SHARP Corporation
- *   07-07-2002 Chris Larson <clarson@digi.com>
- *
- */
-#ifndef __ASM_ARCH_COLLIE_H
-#define __ASM_ARCH_COLLIE_H
-
-
-#define COLLIE_SCP_CHARGE_ON	SCOOP_GPCR_PA11
-#define COLLIE_SCP_DIAG_BOOT1	SCOOP_GPCR_PA12
-#define COLLIE_SCP_DIAG_BOOT2	SCOOP_GPCR_PA13
-#define COLLIE_SCP_MUTE_L	SCOOP_GPCR_PA14
-#define COLLIE_SCP_MUTE_R	SCOOP_GPCR_PA15
-#define COLLIE_SCP_5VON		SCOOP_GPCR_PA16
-#define COLLIE_SCP_AMP_ON	SCOOP_GPCR_PA17
-#define COLLIE_SCP_VPEN		SCOOP_GPCR_PA18
-#define COLLIE_SCP_LB_VOL_CHG	SCOOP_GPCR_PA19
-
-#define COLLIE_SCOOP_IO_DIR	( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
-				COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | COLLIE_SCP_VPEN | \
-				COLLIE_SCP_LB_VOL_CHG )
-#define COLLIE_SCOOP_IO_OUT	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | COLLIE_SCP_VPEN | \
-				COLLIE_SCP_CHARGE_ON )
-
-/* GPIOs for which the generic definition doesn't say much */
-
-#define COLLIE_GPIO_ON_KEY		GPIO_GPIO (0)
-#define COLLIE_GPIO_AC_IN		GPIO_GPIO (1)
-#define COLLIE_GPIO_SDIO_INT		GPIO_GPIO (11)
-#define COLLIE_GPIO_CF_IRQ		GPIO_GPIO (14)
-#define COLLIE_GPIO_nREMOCON_INT	GPIO_GPIO (15)
-#define COLLIE_GPIO_UCB1x00_RESET	GPIO_GPIO (16)
-#define COLLIE_GPIO_nMIC_ON		GPIO_GPIO (17)
-#define COLLIE_GPIO_nREMOCON_ON		GPIO_GPIO (18)
-#define COLLIE_GPIO_CO			GPIO_GPIO (20)
-#define COLLIE_GPIO_MCP_CLK		GPIO_GPIO (21)
-#define COLLIE_GPIO_CF_CD		GPIO_GPIO (22)
-#define COLLIE_GPIO_UCB1x00_IRQ		GPIO_GPIO (23)
-#define COLLIE_GPIO_WAKEUP		GPIO_GPIO (24)
-#define COLLIE_GPIO_GA_INT		GPIO_GPIO (25)
-#define COLLIE_GPIO_MAIN_BAT_LOW	GPIO_GPIO (26)
-
-/* Interrupts */
-
-#define COLLIE_IRQ_GPIO_ON_KEY		IRQ_GPIO0
-#define COLLIE_IRQ_GPIO_AC_IN		IRQ_GPIO1
-#define COLLIE_IRQ_GPIO_SDIO_IRQ	IRQ_GPIO11
-#define COLLIE_IRQ_GPIO_CF_IRQ		IRQ_GPIO14
-#define COLLIE_IRQ_GPIO_nREMOCON_INT	IRQ_GPIO15
-#define COLLIE_IRQ_GPIO_CO		IRQ_GPIO20
-#define COLLIE_IRQ_GPIO_CF_CD		IRQ_GPIO22
-#define COLLIE_IRQ_GPIO_UCB1x00_IRQ	IRQ_GPIO23
-#define COLLIE_IRQ_GPIO_WAKEUP		IRQ_GPIO24
-#define COLLIE_IRQ_GPIO_GA_INT		IRQ_GPIO25
-#define COLLIE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO26
-
-#define COLLIE_LCM_IRQ_GPIO_RTS		IRQ_LOCOMO_GPIO0
-#define COLLIE_LCM_IRQ_GPIO_CTS		IRQ_LOCOMO_GPIO1
-#define COLLIE_LCM_IRQ_GPIO_DSR		IRQ_LOCOMO_GPIO2
-#define COLLIE_LCM_IRQ_GPIO_DTR		IRQ_LOCOMO_GPIO3
-#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT	IRQ_LOCOMO_GPIO13
-#define COLLIE_LCM_IRQ_GPIO_nSD_WP	IRQ_LOCOMO_GPIO14
-
-/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
-#define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0	/* GPIO0=Version                 */
-#define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1	/* GPIO1=TBL_CHK                 */
-#define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2	/* GPIO2=VPNE_ON                 */
-#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3	/* GPIO3=IR_ON                   */
-#define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4	/* GPIO4=AMP_ON                  */
-#define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5	/* GPIO5=Version                 */
-#define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5	/* GPIO5=fs 8k LPF               */
-#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6	/* GPIO6=BUZZER BIAS             */
-#define COLLIE_TC35143_GPIO_MBAT_ON     UCB_IO_7	/* GPIO7=MBAT_ON                 */
-#define COLLIE_TC35143_GPIO_BBAT_ON     UCB_IO_8	/* GPIO8=BBAT_ON                 */
-#define COLLIE_TC35143_GPIO_TMP_ON      UCB_IO_9	/* GPIO9=TMP_ON                  */
-#define COLLIE_TC35143_GPIO_IN		( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 )
-#define COLLIE_TC35143_GPIO_OUT		( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \
-					UCB_IO_7 | UCB_IO_8 | UCB_IO_9 )
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/debug-macro.S b/include/asm-arm/arch-sa1100/debug-macro.S
deleted file mode 100644
index 1b77536..0000000
--- a/include/asm-arm/arch-sa1100/debug-macro.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/* linux/include/asm-arm/arch-sa1100/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-#include <asm/arch/hardware.h>
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x80000000	@ physical base address
-		movne	\rx, #0xf8000000	@ virtual address
-
-		@ We probe for the active serial port here, coherently with
-		@ the comment in include/asm-arm/arch-sa1100/uncompress.h.
-		@ We assume r1 can be clobbered.
-
-		@ see if Ser3 is active
-		add	\rx, \rx, #0x00050000
-		ldr	r1, [\rx, #UTCR3]
-		tst	r1, #UTCR3_TXE
-
-		@ if Ser3 is inactive, then try Ser1
-		addeq	\rx, \rx, #(0x00010000 - 0x00050000)
-		ldreq	r1, [\rx, #UTCR3]
-		tsteq	r1, #UTCR3_TXE
-
-		@ if Ser1 is inactive, then try Ser2
-		addeq	\rx, \rx, #(0x00030000 - 0x00010000)
-		ldreq	r1, [\rx, #UTCR3]
-		tsteq	r1, #UTCR3_TXE
-
-		@ if all ports are inactive, then there is nothing we can do
-		moveq	pc, lr
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #UTDR]
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #UTSR1]
-		tst	\rd, #UTSR1_TNF
-		beq	1001b
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldr	\rd, [\rx, #UTSR1]
-		tst	\rd, #UTSR1_TBY
-		bne	1001b
-		.endm
diff --git a/include/asm-arm/arch-sa1100/dma.h b/include/asm-arm/arch-sa1100/dma.h
deleted file mode 100644
index 6b7917a..0000000
--- a/include/asm-arm/arch-sa1100/dma.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/dma.h
- *
- * Generic SA1100 DMA support
- *
- * Copyright (C) 2000 Nicolas Pitre
- *
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include "hardware.h"
-
-
-/*
- * The SA1100 has six internal DMA channels.
- */
-#define SA1100_DMA_CHANNELS	6
-
-/*
- * Maximum physical DMA buffer size
- */
-#define MAX_DMA_SIZE		0x1fff
-#define CUT_DMA_SIZE		0x1000
-
-/*
- * All possible SA1100 devices a DMA channel can be attached to.
- */
-typedef enum {
-	DMA_Ser0UDCWr  = DDAR_Ser0UDCWr,   /* Ser. port 0 UDC Write */
-	DMA_Ser0UDCRd  = DDAR_Ser0UDCRd,   /* Ser. port 0 UDC Read */
-	DMA_Ser1UARTWr = DDAR_Ser1UARTWr,  /* Ser. port 1 UART Write */
-	DMA_Ser1UARTRd = DDAR_Ser1UARTRd,  /* Ser. port 1 UART Read */
-	DMA_Ser1SDLCWr = DDAR_Ser1SDLCWr,  /* Ser. port 1 SDLC Write */
-	DMA_Ser1SDLCRd = DDAR_Ser1SDLCRd,  /* Ser. port 1 SDLC Read */
-	DMA_Ser2UARTWr = DDAR_Ser2UARTWr,  /* Ser. port 2 UART Write */
-	DMA_Ser2UARTRd = DDAR_Ser2UARTRd,  /* Ser. port 2 UART Read */
-	DMA_Ser2HSSPWr = DDAR_Ser2HSSPWr,  /* Ser. port 2 HSSP Write */
-	DMA_Ser2HSSPRd = DDAR_Ser2HSSPRd,  /* Ser. port 2 HSSP Read */
-	DMA_Ser3UARTWr = DDAR_Ser3UARTWr,  /* Ser. port 3 UART Write */
-	DMA_Ser3UARTRd = DDAR_Ser3UARTRd,  /* Ser. port 3 UART Read */
-	DMA_Ser4MCP0Wr = DDAR_Ser4MCP0Wr,  /* Ser. port 4 MCP 0 Write (audio) */
-	DMA_Ser4MCP0Rd = DDAR_Ser4MCP0Rd,  /* Ser. port 4 MCP 0 Read (audio) */
-	DMA_Ser4MCP1Wr = DDAR_Ser4MCP1Wr,  /* Ser. port 4 MCP 1 Write */
-	DMA_Ser4MCP1Rd = DDAR_Ser4MCP1Rd,  /* Ser. port 4 MCP 1 Read */
-	DMA_Ser4SSPWr  = DDAR_Ser4SSPWr,   /* Ser. port 4 SSP Write (16 bits) */
-	DMA_Ser4SSPRd  = DDAR_Ser4SSPRd    /* Ser. port 4 SSP Read (16 bits) */
-} dma_device_t;
-
-typedef struct {
-	volatile u_long DDAR;
-	volatile u_long SetDCSR;
-	volatile u_long ClrDCSR;
-	volatile u_long RdDCSR;
-	volatile dma_addr_t DBSA;
-	volatile u_long DBTA;
-	volatile dma_addr_t DBSB;
-	volatile u_long DBTB;
-} dma_regs_t;
-
-typedef void (*dma_callback_t)(void *data);
-
-/*
- * DMA function prototypes
- */
-
-extern int sa1100_request_dma( dma_device_t device, const char *device_id,
-			       dma_callback_t callback, void *data,
-			       dma_regs_t **regs );
-extern void sa1100_free_dma( dma_regs_t *regs );
-extern int sa1100_start_dma( dma_regs_t *regs, dma_addr_t dma_ptr, u_int size );
-extern dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs);
-extern void sa1100_reset_dma(dma_regs_t *regs);
-
-/**
- * 	sa1100_stop_dma - stop DMA in progress
- * 	@regs: identifier for the channel to use
- *
- * 	This stops DMA without clearing buffer pointers. Unlike
- * 	sa1100_clear_dma() this allows subsequent use of sa1100_resume_dma()
- * 	or sa1100_get_dma_pos().
- *
- * 	The @regs identifier is provided by a successful call to
- * 	sa1100_request_dma().
- **/
-
-#define sa1100_stop_dma(regs)	((regs)->ClrDCSR = DCSR_IE|DCSR_RUN)
-
-/**
- * 	sa1100_resume_dma - resume DMA on a stopped channel
- * 	@regs: identifier for the channel to use
- *
- * 	This resumes DMA on a channel previously stopped with
- * 	sa1100_stop_dma().
- *
- * 	The @regs identifier is provided by a successful call to
- * 	sa1100_request_dma().
- **/
-
-#define sa1100_resume_dma(regs)	((regs)->SetDCSR = DCSR_IE|DCSR_RUN)
-
-/**
- * 	sa1100_clear_dma - clear DMA pointers
- * 	@regs: identifier for the channel to use
- *
- * 	This clear any DMA state so the DMA engine is ready to restart
- * 	with new buffers through sa1100_start_dma(). Any buffers in flight
- * 	are discarded.
- *
- * 	The @regs identifier is provided by a successful call to
- * 	sa1100_request_dma().
- **/
-
-#define sa1100_clear_dma(regs)	((regs)->ClrDCSR = DCSR_IE|DCSR_RUN|DCSR_STRTA|DCSR_STRTB)
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-sa1100/entry-macro.S b/include/asm-arm/arch-sa1100/entry-macro.S
deleted file mode 100644
index 127db4a..0000000
--- a/include/asm-arm/arch-sa1100/entry-macro.S
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-sa1100/entry-macro.S
- *
- * Low-level IRQ helper macros for SA1100-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
- 		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		mov	\base, #0xfa000000		@ ICIP = 0xfa050000
-		add	\base, \base, #0x00050000
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base]		@ get irqs
-		ldr	\irqnr, [\base, #4]		@ ICMR = 0xfa050004
-		ands	\irqstat, \irqstat, \irqnr
-		mov	\irqnr, #0
-		beq	1001f
-		tst	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tsteq	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tsteq	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tst	\irqstat, #0x0f
-		moveq	\irqstat, \irqstat, lsr #4
-		addeq	\irqnr, \irqnr, #4
-		tst	\irqstat, #0x03
-		moveq	\irqstat, \irqstat, lsr #2
-		addeq	\irqnr, \irqnr, #2
-		tst	\irqstat, #0x01
-		addeqs	\irqnr, \irqnr, #1
-1001:
-		.endm
-
diff --git a/include/asm-arm/arch-sa1100/gpio.h b/include/asm-arm/arch-sa1100/gpio.h
deleted file mode 100644
index e66ecf7..0000000
--- a/include/asm-arm/arch-sa1100/gpio.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/gpio.h
- *
- * SA1100 GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_SA1100_GPIO_H
-#define __ASM_ARCH_SA1100_GPIO_H
-
-#include <asm/arch/hardware.h>
-#include <asm/irq.h>
-#include <asm-generic/gpio.h>
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
-		return GPLR & GPIO_GPIO(gpio);
-	else
-		return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
-		if (value)
-			GPSR = GPIO_GPIO(gpio);
-		else
-			GPCR = GPIO_GPIO(gpio);
-	else
-		__gpio_set_value(gpio, value);
-}
-
-#define gpio_cansleep	__gpio_cansleep
-
-static inline unsigned gpio_to_irq(unsigned gpio)
-{
-	if (gpio < 11)
-		return IRQ_GPIO0 + gpio;
-	else
-		return IRQ_GPIO11 - 11 + gpio;
-}
-
-static inline unsigned irq_to_gpio(unsigned irq)
-{
-	if (irq < IRQ_GPIO11_27)
-		return irq - IRQ_GPIO0;
-	else
-		return irq - IRQ_GPIO11 + 11;
-}
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/hardware.h b/include/asm-arm/arch-sa1100/hardware.h
deleted file mode 100644
index 1abd7cf..0000000
--- a/include/asm-arm/arch-sa1100/hardware.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/hardware.h
- *
- * Copyright (C) 1998 Nicolas Pitre <nico@cam.org>
- *
- * This file contains the hardware definitions for SA1100 architecture
- *
- * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
- *      Definitions for SA1111 added.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-
-#define UNCACHEABLE_ADDR	0xfa050000
-
-
-/*
- * SA1100 internal I/O mappings
- *
- * We have the following mapping:
- *      phys            virt
- *      80000000        f8000000
- *      90000000        fa000000
- *      a0000000        fc000000
- *      b0000000        fe000000
- */
-
-#define VIO_BASE        0xf8000000	/* virtual start of IO space */
-#define VIO_SHIFT       3		/* x = IO space shrink power */
-#define PIO_START       0x80000000	/* physical start of IO space */
-
-#define io_p2v( x )             \
-   ( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE )
-#define io_v2p( x )             \
-   ( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))<<VIO_SHIFT)) + PIO_START )
-
-#ifndef __ASSEMBLY__
-
-# define __REG(x)	(*((volatile unsigned long *)io_p2v(x)))
-# define __PREG(x)	(io_v2p((unsigned long)&(x)))
-
-#else
-
-# define __REG(x)	io_p2v(x)
-# define __PREG(x)	io_v2p(x)
-
-#endif
-
-#include "SA-1100.h"
-
-#ifdef CONFIG_SA1101
-#include "SA-1101.h"
-#endif
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-sa1100/ide.h b/include/asm-arm/arch-sa1100/ide.h
deleted file mode 100644
index 24972f3..0000000
--- a/include/asm-arm/arch-sa1100/ide.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/ide.h
- *
- * Copyright (c) 1998 Hugo Fiennes & Nicolas Pitre
- *
- * 18-aug-2000: Cleanup by Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
- *              Get rid of the special ide_init_hwif_ports() functions
- *              and make a generalised function that can be used by all
- *              architectures.
- */
-
-#include <asm/irq.h>
-#include <asm/arch/hardware.h>
-#include <asm/mach-types.h>
-
-#error "This code is broken and needs update to match with current ide support"
-
-
-/*
- * Set up a hw structure for a specified data port, control port and IRQ.
- * This should follow whatever the default interface uses.
- */
-static inline void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
-				       unsigned long ctrl_port, int *irq)
-{
-	unsigned long reg = data_port;
-	int i;
-	int regincr = 1;
-
-	/* The Empeg board has the first two address lines unused */
-	if (machine_is_empeg())
-		regincr = 1 << 2;
-
-	/* The LART doesn't use A0 for IDE */
-	if (machine_is_lart())
-		regincr = 1 << 1;
-
-	memset(hw, 0, sizeof(*hw));
-
-	for (i = 0; i <= 7; i++) {
-		hw->io_ports_array[i] = reg;
-		reg += regincr;
-	}
-
-	hw->io_ports.ctl_addr = ctrl_port;
-
-	if (irq)
-		*irq = 0;
-}
-
-/*
- * This registers the standard ports for this architecture with the IDE
- * driver.
- */
-static __inline__ void
-ide_init_default_hwifs(void)
-{
-    if (machine_is_lart()) {
-#ifdef CONFIG_SA1100_LART
-        hw_regs_t hw;
-
-        /* Enable GPIO as interrupt line */
-        GPDR &= ~LART_GPIO_IDE;
-	set_irq_type(LART_IRQ_IDE, IRQ_TYPE_EDGE_RISING);
-
-        /* set PCMCIA interface timing */
-        MECR = 0x00060006;
-
-        /* init the interface */
-	ide_init_hwif_ports(&hw, PCMCIA_IO_0_BASE + 0x0000, PCMCIA_IO_0_BASE + 0x1000, NULL);
-        hw.irq = LART_IRQ_IDE;
-        ide_register_hw(&hw);
-#endif
-    }
-}
diff --git a/include/asm-arm/arch-sa1100/io.h b/include/asm-arm/arch-sa1100/io.h
deleted file mode 100644
index 0756269..0000000
--- a/include/asm-arm/arch-sa1100/io.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/io.h
- *
- * Copyright (C) 1997-1999 Russell King
- *
- * Modifications:
- *  06-12-1997	RMK	Created.
- *  07-04-1999	RMK	Major cleanup
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many 
- * drivers out there that might just work if we fake them...
- */
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-#define __io(a)			__io(a)
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/irqs.h b/include/asm-arm/arch-sa1100/irqs.h
deleted file mode 100644
index 7bf8048..0000000
--- a/include/asm-arm/arch-sa1100/irqs.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/irqs.h
- *
- * Copyright (C) 1996 Russell King
- * Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus).
- * Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation)
- *
- * 2001/11/14	RMK	Cleaned up and standardised a lot of the IRQs.
- */
-
-#define	IRQ_GPIO0		0
-#define	IRQ_GPIO1		1
-#define	IRQ_GPIO2		2
-#define	IRQ_GPIO3		3
-#define	IRQ_GPIO4		4
-#define	IRQ_GPIO5		5
-#define	IRQ_GPIO6		6
-#define	IRQ_GPIO7		7
-#define	IRQ_GPIO8		8
-#define	IRQ_GPIO9		9
-#define	IRQ_GPIO10		10
-#define	IRQ_GPIO11_27		11
-#define	IRQ_LCD  		12	/* LCD controller           */
-#define	IRQ_Ser0UDC		13	/* Ser. port 0 UDC          */
-#define	IRQ_Ser1SDLC		14	/* Ser. port 1 SDLC         */
-#define	IRQ_Ser1UART		15	/* Ser. port 1 UART         */
-#define	IRQ_Ser2ICP		16	/* Ser. port 2 ICP          */
-#define	IRQ_Ser3UART		17	/* Ser. port 3 UART         */
-#define	IRQ_Ser4MCP		18	/* Ser. port 4 MCP          */
-#define	IRQ_Ser4SSP		19	/* Ser. port 4 SSP          */
-#define	IRQ_DMA0 		20	/* DMA controller channel 0 */
-#define	IRQ_DMA1 		21	/* DMA controller channel 1 */
-#define	IRQ_DMA2 		22	/* DMA controller channel 2 */
-#define	IRQ_DMA3 		23	/* DMA controller channel 3 */
-#define	IRQ_DMA4 		24	/* DMA controller channel 4 */
-#define	IRQ_DMA5 		25	/* DMA controller channel 5 */
-#define	IRQ_OST0 		26	/* OS Timer match 0         */
-#define	IRQ_OST1 		27	/* OS Timer match 1         */
-#define	IRQ_OST2 		28	/* OS Timer match 2         */
-#define	IRQ_OST3 		29	/* OS Timer match 3         */
-#define	IRQ_RTC1Hz		30	/* RTC 1 Hz clock           */
-#define	IRQ_RTCAlrm		31	/* RTC Alarm                */
-
-#define	IRQ_GPIO11		32
-#define	IRQ_GPIO12		33
-#define	IRQ_GPIO13		34
-#define	IRQ_GPIO14		35
-#define	IRQ_GPIO15		36
-#define	IRQ_GPIO16		37
-#define	IRQ_GPIO17		38
-#define	IRQ_GPIO18		39
-#define	IRQ_GPIO19		40
-#define	IRQ_GPIO20		41
-#define	IRQ_GPIO21		42
-#define	IRQ_GPIO22		43
-#define	IRQ_GPIO23		44
-#define	IRQ_GPIO24		45
-#define	IRQ_GPIO25		46
-#define	IRQ_GPIO26		47
-#define	IRQ_GPIO27		48
-
-/*
- * The next 16 interrupts are for board specific purposes.  Since
- * the kernel can only run on one machine at a time, we can re-use
- * these.  If you need more, increase IRQ_BOARD_END, but keep it
- * within sensible limits.  IRQs 49 to 64 are available.
- */
-#define IRQ_BOARD_START		49
-#define IRQ_BOARD_END		65
-
-#define IRQ_SA1111_START	(IRQ_BOARD_END)
-#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
-#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
-#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
-#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
-#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
-#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
-#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
-#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
-#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
-#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
-#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
-#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
-#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
-#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
-#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
-#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
-#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
-#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
-#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
-#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
-#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
-#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
-#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
-#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
-#define SSPXMTINT		(IRQ_BOARD_END + 24)
-#define SSPRCVINT		(IRQ_BOARD_END + 25)
-#define SSPROR			(IRQ_BOARD_END + 26)
-#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
-#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
-#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
-#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
-#define AUDTFSR			(IRQ_BOARD_END + 36)
-#define AUDRFSR			(IRQ_BOARD_END + 37)
-#define AUDTUR			(IRQ_BOARD_END + 38)
-#define AUDROR			(IRQ_BOARD_END + 39)
-#define AUDDTS			(IRQ_BOARD_END + 40)
-#define AUDRDD			(IRQ_BOARD_END + 41)
-#define AUDSTO			(IRQ_BOARD_END + 42)
-#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
-#define IRQ_HCIM		(IRQ_BOARD_END + 44)
-#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
-#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
-#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
-#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
-#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
-#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
-#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
-#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
-#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
-#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
-
-#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
-#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
-#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
-#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
-#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
-#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
-#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
-#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
-#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
-#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
-#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
-#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
-#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
-#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
-#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
-#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
-#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
-#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
-#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
-#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
-#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_REND	(IRQ_BOARD_END + 20)
-#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
-
-/*
- * Figure out the MAX IRQ number.
- *
- * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
- * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
- * Otherwise, we have the standard IRQs only.
- */
-#ifdef CONFIG_SA1111
-#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SA1100_H3800)
-#define NR_IRQS			(IRQ_BOARD_END)
-#elif defined(CONFIG_SHARP_LOCOMO)
-#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
-#else
-#define NR_IRQS			(IRQ_BOARD_START)
-#endif
-
-/*
- * Board specific IRQs.  Define them here.
- * Do not surround them with ifdefs.
- */
-#define IRQ_NEPONSET_SMC9196	(IRQ_BOARD_START + 0)
-#define IRQ_NEPONSET_USAR	(IRQ_BOARD_START + 1)
-#define IRQ_NEPONSET_SA1111	(IRQ_BOARD_START + 2)
-
-/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
-#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
-#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
-#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
-#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
-
-/* H3800-specific IRQs (CONFIG_SA1100_H3800) */
-#define H3800_KPIO_IRQ_START    (IRQ_BOARD_START)
-#define IRQ_H3800_KEY           (IRQ_BOARD_START + 0)
-#define IRQ_H3800_SPI           (IRQ_BOARD_START + 1)
-#define IRQ_H3800_OWM           (IRQ_BOARD_START + 2)
-#define IRQ_H3800_ADC           (IRQ_BOARD_START + 3)
-#define IRQ_H3800_UART_0        (IRQ_BOARD_START + 4)
-#define IRQ_H3800_UART_1        (IRQ_BOARD_START + 5)
-#define IRQ_H3800_TIMER_0       (IRQ_BOARD_START + 6)
-#define IRQ_H3800_TIMER_1       (IRQ_BOARD_START + 7)
-#define IRQ_H3800_TIMER_2       (IRQ_BOARD_START + 8)
-#define H3800_KPIO_IRQ_COUNT    9
-
-#define H3800_GPIO_IRQ_START    (IRQ_BOARD_START + 9)
-#define IRQ_H3800_PEN           (IRQ_BOARD_START + 9)
-#define IRQ_H3800_SD_DETECT     (IRQ_BOARD_START + 10)
-#define IRQ_H3800_EAR_IN        (IRQ_BOARD_START + 11)
-#define IRQ_H3800_USB_DETECT    (IRQ_BOARD_START + 12)
-#define IRQ_H3800_SD_CON_SLT    (IRQ_BOARD_START + 13)
-#define H3800_GPIO_IRQ_COUNT    5
diff --git a/include/asm-arm/arch-sa1100/jornada720.h b/include/asm-arm/arch-sa1100/jornada720.h
deleted file mode 100644
index 45d2bb5..0000000
--- a/include/asm-arm/arch-sa1100/jornada720.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * include/asm-arm/arch-sa1100/jornada720.h
- *
- * This file contains SSP/MCU communication definitions for HP Jornada 710/720/728
- *
- * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
- *  Copyright (C) 2000 John Ankcorn <jca@lcs.mit.edu>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
- /* HP Jornada 7xx microprocessor commands */
-#define GETBATTERYDATA		0xc0
-#define GETSCANKEYCODE		0x90
-#define GETTOUCHSAMPLES		0xa0
-#define GETCONTRAST		0xD0
-#define SETCONTRAST		0xD1
-#define GETBRIGHTNESS		0xD2
-#define SETBRIGHTNESS		0xD3
-#define CONTRASTOFF		0xD8
-#define BRIGHTNESSOFF		0xD9
-#define PWMOFF			0xDF
-#define TXDUMMY			0x11
-#define ERRORCODE		0x00
diff --git a/include/asm-arm/arch-sa1100/mcp.h b/include/asm-arm/arch-sa1100/mcp.h
deleted file mode 100644
index f58a227..0000000
--- a/include/asm-arm/arch-sa1100/mcp.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-sa1100/mcp.h
- *
- *  Copyright (C) 2005 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_ARCH_MCP_H
-#define __ASM_ARM_ARCH_MCP_H
-
-#include <linux/types.h>
-
-struct mcp_plat_data {
-	u32 mccr0;
-	u32 mccr1;
-	unsigned int sclk_rate;
-};
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/memory.h b/include/asm-arm/arch-sa1100/memory.h
deleted file mode 100644
index 0e907fc..0000000
--- a/include/asm-arm/arch-sa1100/memory.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/memory.h
- *
- * Copyright (C) 1999-2000 Nicolas Pitre <nico@cam.org>
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset is 0xc0000000 on the SA1100
- */
-#define PHYS_OFFSET	UL(0xc0000000)
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_SA1111
-void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes);
-
-#define arch_adjust_zones(node, size, holes) \
-	sa1111_adjust_zones(node, size, holes)
-
-#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_1M - 1)
-
-#endif
-#endif
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- *
- * On the SA1100, bus addresses are equivalent to physical addresses.
- */
-#define __virt_to_bus(x)	 __virt_to_phys(x)
-#define __bus_to_virt(x)	 __phys_to_virt(x)
-
-/*
- * Because of the wide memory address space between physical RAM banks on the 
- * SA1100, it's much convenient to use Linux's NUMA support to implement our 
- * memory map representation.  Assuming all memory nodes have equal access 
- * characteristics, we then have generic discontiguous memory support.
- *
- * Of course, all this isn't mandatory for SA1100 implementations with only
- * one used memory bank.  For those, simply undefine CONFIG_DISCONTIGMEM.
- *
- * The nodes are matched with the physical memory bank addresses which are 
- * incidentally the same as virtual addresses.
- * 
- * 	node 0:  0xc0000000 - 0xc7ffffff
- * 	node 1:  0xc8000000 - 0xcfffffff
- * 	node 2:  0xd0000000 - 0xd7ffffff
- * 	node 3:  0xd8000000 - 0xdfffffff
- */
-#define NODE_MEM_SIZE_BITS	27
-
-/*
- * Cache flushing area - SA1100 zero bank
- */
-#define FLUSH_BASE_PHYS		0xe0000000
-#define FLUSH_BASE		0xf5000000
-#define FLUSH_BASE_MINICACHE	0xf5100000
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/neponset.h b/include/asm-arm/arch-sa1100/neponset.h
deleted file mode 100644
index 09ec9e2b..0000000
--- a/include/asm-arm/arch-sa1100/neponset.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/neponset.h
- *
- * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
- *
- * This file contains the hardware specific definitions for Assabet
- * Only include this file from SA1100-specific files.
- *
- * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
- *      Definitions for Neponset added.
- */
-#ifndef __ASM_ARCH_NEPONSET_H
-#define __ASM_ARCH_NEPONSET_H
-
-/*
- * Neponset definitions: 
- */
-
-#define NEPONSET_CPLD_BASE      (0x10000000)
-#define Nep_p2v( x )            ((x) - NEPONSET_CPLD_BASE + 0xf3000000)
-#define Nep_v2p( x )            ((x) - 0xf3000000 + NEPONSET_CPLD_BASE)
-
-#define _IRR                    0x10000024      /* Interrupt Reason Register */
-#define _AUD_CTL                0x100000c0      /* Audio controls (RW)       */
-#define _MDM_CTL_0              0x100000b0      /* Modem control 0 (RW)      */
-#define _MDM_CTL_1              0x100000b4      /* Modem control 1 (RW)      */
-#define _NCR_0	                0x100000a0      /* Control Register (RW)     */
-#define _KP_X_OUT               0x10000090      /* Keypad row write (RW)     */
-#define _KP_Y_IN                0x10000080      /* Keypad column read (RO)   */
-#define _SWPK                   0x10000020      /* Switch pack (RO)          */
-#define _WHOAMI                 0x10000000      /* System ID Register (RO)   */
-
-#define _LEDS                   0x10000010      /* LEDs [31:0] (WO)          */
-
-#define IRR                     (*((volatile u_char *) Nep_p2v(_IRR)))
-#define AUD_CTL                 (*((volatile u_char *) Nep_p2v(_AUD_CTL)))
-#define MDM_CTL_0               (*((volatile u_char *) Nep_p2v(_MDM_CTL_0)))
-#define MDM_CTL_1               (*((volatile u_char *) Nep_p2v(_MDM_CTL_1)))
-#define NCR_0			(*((volatile u_char *) Nep_p2v(_NCR_0)))
-#define KP_X_OUT                (*((volatile u_char *) Nep_p2v(_KP_X_OUT)))
-#define KP_Y_IN                 (*((volatile u_char *) Nep_p2v(_KP_Y_IN)))
-#define SWPK                    (*((volatile u_char *) Nep_p2v(_SWPK)))
-#define WHOAMI                  (*((volatile u_char *) Nep_p2v(_WHOAMI)))
-
-#define LEDS                    (*((volatile Word   *) Nep_p2v(_LEDS)))
-
-#define IRR_ETHERNET		(1<<0)
-#define IRR_USAR		(1<<1)
-#define IRR_SA1111		(1<<2)
-
-#define AUD_SEL_1341            (1<<0)
-#define AUD_MUTE_1341           (1<<1)
-
-#define MDM_CTL0_RTS1		(1 << 0)
-#define MDM_CTL0_DTR1		(1 << 1)
-#define MDM_CTL0_RTS2		(1 << 2)
-#define MDM_CTL0_DTR2		(1 << 3)
-
-#define MDM_CTL1_CTS1		(1 << 0)
-#define MDM_CTL1_DSR1		(1 << 1)
-#define MDM_CTL1_DCD1		(1 << 2)
-#define MDM_CTL1_CTS2		(1 << 3)
-#define MDM_CTL1_DSR2		(1 << 4)
-#define MDM_CTL1_DCD2		(1 << 5)
-
-#define NCR_GP01_OFF		(1<<0)
-#define NCR_TP_PWR_EN		(1<<1)
-#define NCR_MS_PWR_EN		(1<<2)
-#define NCR_ENET_OSC_EN		(1<<3)
-#define NCR_SPI_KB_WK_UP	(1<<4)
-#define NCR_A0VPP		(1<<5)
-#define NCR_A1VPP		(1<<6)
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/simpad.h b/include/asm-arm/arch-sa1100/simpad.h
deleted file mode 100644
index 034301d..0000000
--- a/include/asm-arm/arch-sa1100/simpad.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/simpad.h
- *
- * based of assabet.h same as HUW_Webpanel
- *
- * This file contains the hardware specific definitions for SIMpad
- *
- * 2001/05/14 Juergen Messerer <juergen.messerer@freesurf.ch>
- */
-
-#ifndef __ASM_ARCH_SIMPAD_H
-#define __ASM_ARCH_SIMPAD_H
-
-
-#define GPIO_UART1_RTS	GPIO_GPIO14
-#define GPIO_UART1_DTR	GPIO_GPIO7
-#define GPIO_UART1_CTS	GPIO_GPIO8
-#define GPIO_UART1_DCD	GPIO_GPIO23
-#define GPIO_UART1_DSR	GPIO_GPIO6
-
-#define GPIO_UART3_RTS	GPIO_GPIO12
-#define GPIO_UART3_DTR	GPIO_GPIO16
-#define GPIO_UART3_CTS	GPIO_GPIO13
-#define GPIO_UART3_DCD	GPIO_GPIO18
-#define GPIO_UART3_DSR	GPIO_GPIO17
-
-#define GPIO_POWER_BUTTON	GPIO_GPIO0
-#define GPIO_UCB1300_IRQ	GPIO_GPIO22	/* UCB GPIO and touchscreen */
-
-#define IRQ_UART1_CTS	IRQ_GPIO15
-#define IRQ_UART1_DCD	GPIO_GPIO23
-#define IRQ_UART1_DSR	GPIO_GPIO6
-#define IRQ_UART3_CTS	GPIO_GPIO13
-#define IRQ_UART3_DCD	GPIO_GPIO18
-#define IRQ_UART3_DSR	GPIO_GPIO17
-
-#define IRQ_GPIO_UCB1300_IRQ IRQ_GPIO22
-#define IRQ_GPIO_POWER_BUTTON IRQ_GPIO0
-
-
-/*---  PCMCIA  ---*/
-#define GPIO_CF_CD              GPIO_GPIO24
-#define GPIO_CF_IRQ             GPIO_GPIO1
-#define IRQ_GPIO_CF_IRQ         IRQ_GPIO1
-#define IRQ_GPIO_CF_CD          IRQ_GPIO24
-
-/*--- SmartCard ---*/
-#define GPIO_SMART_CARD		GPIO_GPIO10
-#define IRQ_GPIO_SMARD_CARD	IRQ_GPIO10
-
-// CS3 Latch is write only, a shadow is necessary
-
-#define CS3BUSTYPE unsigned volatile long
-#define CS3_BASE        0xf1000000
-
-#define VCC_5V_EN       0x0001 // For 5V PCMCIA
-#define VCC_3V_EN       0x0002 // FOR 3.3V PCMCIA
-#define EN1             0x0004 // This is only for EPROM's
-#define EN0             0x0008 // Both should be enable for 3.3V or 5V
-#define DISPLAY_ON      0x0010
-#define PCMCIA_BUFF_DIS 0x0020
-#define MQ_RESET        0x0040
-#define PCMCIA_RESET    0x0080
-#define DECT_POWER_ON   0x0100
-#define IRDA_SD         0x0200 // Shutdown for powersave
-#define RS232_ON        0x0400
-#define SD_MEDIAQ       0x0800 // Shutdown for powersave
-#define LED2_ON         0x1000
-#define IRDA_MODE       0x2000 // Fast/Slow IrDA mode
-#define ENABLE_5V       0x4000 // Enable 5V circuit
-#define RESET_SIMCARD   0x8000
-
-#define RS232_ENABLE    0x0440
-#define PCMCIAMASK      0x402f
-
-
-struct simpad_battery {
-	unsigned char ac_status;	/* line connected yes/no */
-	unsigned char status;		/* battery loading yes/no */
-	unsigned char percentage;	/* percentage loaded */
-	unsigned short life;		/* life till empty */
-};
-
-/* These should match the apm_bios.h definitions */
-#define SIMPAD_AC_STATUS_AC_OFFLINE      0x00
-#define SIMPAD_AC_STATUS_AC_ONLINE       0x01
-#define SIMPAD_AC_STATUS_AC_BACKUP       0x02   /* What does this mean? */
-#define SIMPAD_AC_STATUS_AC_UNKNOWN      0xff
-
-/* These bitfields are rarely "or'd" together */
-#define SIMPAD_BATT_STATUS_HIGH          0x01
-#define SIMPAD_BATT_STATUS_LOW           0x02
-#define SIMPAD_BATT_STATUS_CRITICAL      0x04
-#define SIMPAD_BATT_STATUS_CHARGING      0x08
-#define SIMPAD_BATT_STATUS_CHARGE_MAIN   0x10
-#define SIMPAD_BATT_STATUS_DEAD          0x20   /* Battery will not charge */
-#define SIMPAD_BATT_NOT_INSTALLED        0x20   /* For expansion pack batteries */
-#define SIMPAD_BATT_STATUS_FULL          0x40   /* Battery fully charged (and connected to AC) */
-#define SIMPAD_BATT_STATUS_NOBATT        0x80
-#define SIMPAD_BATT_STATUS_UNKNOWN       0xff
-
-extern int simpad_get_battery(struct simpad_battery* );
-
-#endif // __ASM_ARCH_SIMPAD_H
-
-
-
-
-
-
-
-
diff --git a/include/asm-arm/arch-sa1100/system.h b/include/asm-arm/arch-sa1100/system.h
deleted file mode 100644
index 63375a0..0000000
--- a/include/asm-arm/arch-sa1100/system.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/system.h
- *
- * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
- */
-#include <asm/arch/hardware.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	if (mode == 's') {
-		/* Jump into ROM at address 0 */
-		cpu_reset(0);
-	} else {
-		/* Use on-chip reset capability */
-		RSRR = RSRR_SWR;
-	}
-}
diff --git a/include/asm-arm/arch-sa1100/timex.h b/include/asm-arm/arch-sa1100/timex.h
deleted file mode 100644
index 837be9b..0000000
--- a/include/asm-arm/arch-sa1100/timex.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/timex.h
- *
- * SA1100 architecture timex specifications
- *
- * Copyright (C) 1998 
- */
-
-/*
- * SA1100 timer
- */
-#define CLOCK_TICK_RATE		3686400
diff --git a/include/asm-arm/arch-sa1100/uncompress.h b/include/asm-arm/arch-sa1100/uncompress.h
deleted file mode 100644
index 17e64d2..0000000
--- a/include/asm-arm/arch-sa1100/uncompress.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/uncompress.h
- *
- * (C) 1999 Nicolas Pitre <nico@cam.org>
- *
- * Reorganised to be machine independent.
- */
-
-#include "hardware.h"
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- */
-
-#define UART(x)		(*(volatile unsigned long *)(serial_port + (x)))
-
-static void putc(int c)
-{
-	unsigned long serial_port;
-
-	do {
-		serial_port = _Ser3UTCR0;
-		if (UART(UTCR3) & UTCR3_TXE) break;
-		serial_port = _Ser1UTCR0;
-		if (UART(UTCR3) & UTCR3_TXE) break;
-		serial_port = _Ser2UTCR0;
-		if (UART(UTCR3) & UTCR3_TXE) break;
-		return;
-	} while (0);
-
-	/* wait for space in the UART's transmitter */
-	while (!(UART(UTSR1) & UTSR1_TNF))
-		barrier();
-
-	/* send the character out. */
-	UART(UTDR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * Nothing to do for these
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-sa1100/vmalloc.h b/include/asm-arm/arch-sa1100/vmalloc.h
deleted file mode 100644
index 2fb1c6f..0000000
--- a/include/asm-arm/arch-sa1100/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/vmalloc.h
- */
-#define VMALLOC_END       (0xe8000000)
diff --git a/include/asm-arm/arch-shark/debug-macro.S b/include/asm-arm/arch-shark/debug-macro.S
deleted file mode 100644
index 7cb37f7..0000000
--- a/include/asm-arm/arch-shark/debug-macro.S
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/include/asm-arm/arch-shark/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mov	\rx, #0xe0000000
-		orr	\rx, \rx, #0x000003f8
-		.endm
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx]
-		.endm
-
-		.macro	busyuart,rd,rx
-		mov	\rd, #0
-1001:		add	\rd, \rd, #1
-		teq	\rd, #0x10000
-		bne	1001b
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
diff --git a/include/asm-arm/arch-shark/dma.h b/include/asm-arm/arch-shark/dma.h
deleted file mode 100644
index fc985d5..0000000
--- a/include/asm-arm/arch-shark/dma.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/dma.h
- *
- * by Alexander Schulz
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* Use only the lowest 4MB, nothing else works.
- * The rest is not DMAable. See dev /  .properties
- * in OpenFirmware.
- */
-#define MAX_DMA_ADDRESS		0xC0400000
-#define MAX_DMA_CHANNELS	8
-#define DMA_ISA_CASCADE         4
-
-#endif /* _ASM_ARCH_DMA_H */
-
diff --git a/include/asm-arm/arch-shark/entry-macro.S b/include/asm-arm/arch-shark/entry-macro.S
deleted file mode 100644
index 82463f3..0000000
--- a/include/asm-arm/arch-shark/entry-macro.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * include/asm-arm/arch-shark/entry-macro.S
- *
- * Low-level IRQ helper macros for Shark platform
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	r4, #0xe0000000
-
-		mov	\irqstat, #0x0C
-		strb	\irqstat, [r4, #0x20]		@outb(0x0C, 0x20) /* Poll command */
-		ldrb	\irqnr, [r4, #0x20]		@irq = inb(0x20) & 7
-		and	\irqstat, \irqnr, #0x80
-		teq	\irqstat, #0
-		beq	43f
-		and	\irqnr, \irqnr, #7
-		teq	\irqnr, #2
-		bne	44f
-43:		mov	\irqstat, #0x0C
-		strb	\irqstat, [r4, #0xa0]		@outb(0x0C, 0xA0) /* Poll command */
-		ldrb	\irqnr, [r4, #0xa0]		@irq = (inb(0xA0) & 7) + 8
-		and	\irqstat, \irqnr, #0x80
-		teq	\irqstat, #0
-		beq	44f
-		and	\irqnr, \irqnr, #7
-		add	\irqnr, \irqnr, #8
-44:		teq	\irqstat, #0
-		.endm
-
diff --git a/include/asm-arm/arch-shark/hardware.h b/include/asm-arm/arch-shark/hardware.h
deleted file mode 100644
index ecba452..0000000
--- a/include/asm-arm/arch-shark/hardware.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/hardware.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * linux/include/asm-arm/arch-ebsa110/hardware.h
- * Copyright (C) 1996-1999 Russell King.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#ifndef __ASSEMBLY__
-
-/*
- * Mapping areas
- */
-#define IO_BASE			0xe0000000
-
-#else
-
-#define IO_BASE			0
-
-#endif
-
-#define IO_SIZE			0x08000000
-#define IO_START		0x40000000
-#define ROMCARD_SIZE		0x08000000
-#define ROMCARD_START		0x10000000
-
-#define PCIO_BASE		0xe0000000
-
-
-/* defines for the Framebuffer */
-#define FB_START		0x06000000
-#define FB_SIZE			0x01000000
-
-#define UNCACHEABLE_ADDR        0xdf010000
-
-#define SEQUOIA_LED_GREEN       (1<<6)
-#define SEQUOIA_LED_AMBER       (1<<5)
-#define SEQUOIA_LED_BACK        (1<<7)
-
-#define pcibios_assign_all_busses()     1
-
-#define PCIBIOS_MIN_IO          0x6000
-#define PCIBIOS_MIN_MEM         0x50000000
-#define PCIMEM_BASE		0xe8000000
-
-#endif
-
diff --git a/include/asm-arm/arch-shark/io.h b/include/asm-arm/arch-shark/io.h
deleted file mode 100644
index b11d786..0000000
--- a/include/asm-arm/arch-shark/io.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/io.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * linux/include/asm-arm/arch-ebsa110/io.h
- * Copyright (C) 1997,1998 Russell King
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses.  PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
- * and are translated to the start of IO.
- */
-#define __PORT_PCIO(x)	(!((x) & 0x80000000))
-
-#define __io(a)                 ((void __iomem *)(PCIO_BASE + (a)))
-
-
-static inline unsigned int __ioaddr (unsigned int port)			\
-{										\
-	if (__PORT_PCIO(port))							\
-		return (unsigned int)(PCIO_BASE + (port));			\
-	else									\
-		return (unsigned int)(IO_BASE + (port));			\
-}
-
-#define __mem_pci(addr) (addr)
-
-/*
- * Translated address IO functions
- *
- * IO address has already been translated to a virtual address
- */
-#define outb_t(v,p)								\
-	(*(volatile unsigned char *)(p) = (v))
-
-#define inb_t(p)								\
-	(*(volatile unsigned char *)(p))
-
-#define outl_t(v,p)								\
-	(*(volatile unsigned long *)(p) = (v))
-
-#define inl_t(p)								\
-	(*(volatile unsigned long *)(p))
-
-#endif
diff --git a/include/asm-arm/arch-shark/irqs.h b/include/asm-arm/arch-shark/irqs.h
deleted file mode 100644
index b36cc975..0000000
--- a/include/asm-arm/arch-shark/irqs.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/irqs.h
- *
- * by Alexander Schulz
- */
-
-#define NR_IRQS			16
-
-#define IRQ_ISA_KEYBOARD	 1
-#define RTC_IRQ			 8
-#define I8042_KBD_IRQ		 1
-#define I8042_AUX_IRQ		12
-#define IRQ_HARDDISK            14
diff --git a/include/asm-arm/arch-shark/memory.h b/include/asm-arm/arch-shark/memory.h
deleted file mode 100644
index 6968d610..0000000
--- a/include/asm-arm/arch-shark/memory.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/memory.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * linux/include/asm-arm/arch-ebsa110/memory.h
- * Copyright (c) 1996-1999 Russell King.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET     UL(0x08000000)
-
-#ifndef __ASSEMBLY__
-
-static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsigned long *zhole_size) 
-{
-  if (node != 0) return;
-  /* Only the first 4 MB (=1024 Pages) are usable for DMA */
-  zone_size[1] = zone_size[0] - 1024;
-  zone_size[0] = 1024;
-  zhole_size[1] = zhole_size[0];
-  zhole_size[0] = 0;
-}
-
-#define arch_adjust_zones(node, size, holes) \
-	__arch_adjust_zones(node, size, holes)
-
-#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_4M - 1)
-
-#endif
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-/*
- * Cache flushing area
- */
-#define FLUSH_BASE_PHYS		0x80000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/include/asm-arm/arch-shark/system.h b/include/asm-arm/arch-shark/system.h
deleted file mode 100644
index f12d771..0000000
--- a/include/asm-arm/arch-shark/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/system.h
- *
- * by Alexander Schulz
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/io.h>
-
-static void arch_reset(char mode)
-{
-	short temp;
-	local_irq_disable();
-	/* Reset the Machine via pc[3] of the sequoia chipset */
-	outw(0x09,0x24);
-	temp=inw(0x26);
-	temp = temp | (1<<3) | (1<<10);
-	outw(0x09,0x24);
-	outw(temp,0x26);
-
-}
-
-static inline void arch_idle(void)
-{
-}
-
-#endif
diff --git a/include/asm-arm/arch-shark/timex.h b/include/asm-arm/arch-shark/timex.h
deleted file mode 100644
index 0d02d25..0000000
--- a/include/asm-arm/arch-shark/timex.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/timex.h
- *
- * by Alexander Schulz
- */
-
-#define CLOCK_TICK_RATE 1193180
diff --git a/include/asm-arm/arch-shark/uncompress.h b/include/asm-arm/arch-shark/uncompress.h
deleted file mode 100644
index 7eca653..0000000
--- a/include/asm-arm/arch-shark/uncompress.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/uncompress.h
- * by Alexander Schulz
- *
- * derived from:
- * linux/include/asm-arm/arch-ebsa285/uncompress.h
- * Copyright (C) 1996,1997,1998 Russell King
- */
-
-#define SERIAL_BASE ((volatile unsigned char *)0x400003f8)
-
-static inline void putc(int c)
-{
-	int t;
-
-	SERIAL_BASE[0] = c;
-	t=0x10000;
-	while (t--);
-}
-
-static inline void flush(void)
-{
-}
-
-#ifdef DEBUG
-static void putn(unsigned long z)
-{
-	int i;
-	char x;
-
-	putc('0');
-	putc('x');
-	for (i=0;i<8;i++) {
-		x='0'+((z>>((7-i)*4))&0xf);
-		if (x>'9') x=x-'0'+'A'-10;
-		putc(x);
-	}
-}
-
-static void putr()
-{
-	putc('\n');
-	putc('\r');
-}
-#endif
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-shark/vmalloc.h b/include/asm-arm/arch-shark/vmalloc.h
deleted file mode 100644
index fac37c63..0000000
--- a/include/asm-arm/arch-shark/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/vmalloc.h
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-versatile/debug-macro.S b/include/asm-arm/arch-versatile/debug-macro.S
deleted file mode 100644
index fe106d1..0000000
--- a/include/asm-arm/arch-versatile/debug-macro.S
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/include/asm-arm/arch-versatile/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx,      #0x10000000
-		movne	\rx,      #0xf1000000	@ virtual base
-		orr	\rx, \rx, #0x001F0000
-		orr	\rx, \rx, #0x00001000
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/include/asm-arm/arch-versatile/dma.h b/include/asm-arm/arch-versatile/dma.h
deleted file mode 100644
index 64257734..0000000
--- a/include/asm-arm/arch-versatile/dma.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/dma.h
- *
- *  Copyright (C) 2003 ARM Limited.
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-versatile/entry-macro.S b/include/asm-arm/arch-versatile/entry-macro.S
deleted file mode 100644
index cd11416..0000000
--- a/include/asm-arm/arch-versatile/entry-macro.S
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-arm/arch-versatile/entry-macro.S
- *
- * Low-level IRQ helper macros for Versatile platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-#include <asm/hardware/vic.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =IO_ADDRESS(VERSATILE_VIC_BASE)
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base, #VIC_IRQ_STATUS]	@ get masked status
-		mov	\irqnr, #0
-		teq	\irqstat, #0
-		beq	1003f
-
-1001:		tst	\irqstat, #15
-		bne	1002f
-		add	\irqnr, \irqnr, #4
-		movs	\irqstat, \irqstat, lsr #4
-		bne	1001b
-1002:		tst	\irqstat, #1
-		bne	1003f
-		add	\irqnr, \irqnr, #1
-		movs	\irqstat, \irqstat, lsr #1
-		bne	1002b
-1003:		/* EQ will be set if no irqs pending */
-
-@		clz	\irqnr, \irqstat
-@1003:		/* EQ will be set if we reach MAXIRQNUM */
-		.endm
-
diff --git a/include/asm-arm/arch-versatile/hardware.h b/include/asm-arm/arch-versatile/hardware.h
deleted file mode 100644
index edc0659..0000000
--- a/include/asm-arm/arch-versatile/hardware.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/hardware.h
- *
- *  This file contains the hardware definitions of the Versatile boards.
- *
- *  Copyright (C) 2003 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <asm/arch/platform.h>
-
-/*
- * PCI space virtual addresses
- */
-#define VERSATILE_PCI_VIRT_BASE		(void __iomem *)0xe8000000ul
-#define VERSATILE_PCI_CFG_VIRT_BASE	(void __iomem *)0xe9000000ul
-
-#if 0
-#define VERSATILE_PCI_VIRT_MEM_BASE0	0xf4000000
-#define VERSATILE_PCI_VIRT_MEM_BASE1	0xf5000000
-#define VERSATILE_PCI_VIRT_MEM_BASE2	0xf6000000
-
-#define PCIO_BASE			VERSATILE_PCI_VIRT_MEM_BASE0
-#define PCIMEM_BASE			VERSATILE_PCI_VIRT_MEM_BASE1
-#endif
-
-/* CIK guesswork */
-#define PCIBIOS_MIN_IO			0x44000000
-#define PCIBIOS_MIN_MEM			0x50000000
-
-#define pcibios_assign_all_busses()     1
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
-
-#endif
diff --git a/include/asm-arm/arch-versatile/io.h b/include/asm-arm/arch-versatile/io.h
deleted file mode 100644
index c4d0194..0000000
--- a/include/asm-arm/arch-versatile/io.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/io.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-#define __io(a)	__io(a)
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-versatile/irqs.h b/include/asm-arm/arch-versatile/irqs.h
deleted file mode 100644
index f7263b9..0000000
--- a/include/asm-arm/arch-versatile/irqs.h
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/irqs.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <asm/arch/platform.h>
-
-/* 
- *  IRQ interrupts definitions are the same as the INT definitions
- *  held within platform.h
- */
-#define IRQ_VIC_START		0
-#define IRQ_WDOGINT		(IRQ_VIC_START + INT_WDOGINT)
-#define IRQ_SOFTINT		(IRQ_VIC_START + INT_SOFTINT)
-#define IRQ_COMMRx		(IRQ_VIC_START + INT_COMMRx)
-#define IRQ_COMMTx		(IRQ_VIC_START + INT_COMMTx)
-#define IRQ_TIMERINT0_1		(IRQ_VIC_START + INT_TIMERINT0_1)
-#define IRQ_TIMERINT2_3		(IRQ_VIC_START + INT_TIMERINT2_3)
-#define IRQ_GPIOINT0		(IRQ_VIC_START + INT_GPIOINT0)
-#define IRQ_GPIOINT1		(IRQ_VIC_START + INT_GPIOINT1)
-#define IRQ_GPIOINT2		(IRQ_VIC_START + INT_GPIOINT2)
-#define IRQ_GPIOINT3		(IRQ_VIC_START + INT_GPIOINT3)
-#define IRQ_RTCINT		(IRQ_VIC_START + INT_RTCINT)
-#define IRQ_SSPINT		(IRQ_VIC_START + INT_SSPINT)
-#define IRQ_UARTINT0		(IRQ_VIC_START + INT_UARTINT0)
-#define IRQ_UARTINT1		(IRQ_VIC_START + INT_UARTINT1)
-#define IRQ_UARTINT2		(IRQ_VIC_START + INT_UARTINT2)
-#define IRQ_SCIINT		(IRQ_VIC_START + INT_SCIINT)
-#define IRQ_CLCDINT		(IRQ_VIC_START + INT_CLCDINT)
-#define IRQ_DMAINT		(IRQ_VIC_START + INT_DMAINT)
-#define IRQ_PWRFAILINT 		(IRQ_VIC_START + INT_PWRFAILINT)
-#define IRQ_MBXINT		(IRQ_VIC_START + INT_MBXINT)
-#define IRQ_GNDINT		(IRQ_VIC_START + INT_GNDINT)
-#define IRQ_VICSOURCE21		(IRQ_VIC_START + INT_VICSOURCE21)
-#define IRQ_VICSOURCE22		(IRQ_VIC_START + INT_VICSOURCE22)
-#define IRQ_VICSOURCE23		(IRQ_VIC_START + INT_VICSOURCE23)
-#define IRQ_VICSOURCE24		(IRQ_VIC_START + INT_VICSOURCE24)
-#define IRQ_VICSOURCE25		(IRQ_VIC_START + INT_VICSOURCE25)
-#define IRQ_VICSOURCE26		(IRQ_VIC_START + INT_VICSOURCE26)
-#define IRQ_VICSOURCE27		(IRQ_VIC_START + INT_VICSOURCE27)
-#define IRQ_VICSOURCE28		(IRQ_VIC_START + INT_VICSOURCE28)
-#define IRQ_VICSOURCE29		(IRQ_VIC_START + INT_VICSOURCE29)
-#define IRQ_VICSOURCE30		(IRQ_VIC_START + INT_VICSOURCE30)
-#define IRQ_VICSOURCE31		(IRQ_VIC_START + INT_VICSOURCE31)
-#define IRQ_VIC_END		(IRQ_VIC_START + 31)
-
-#define IRQMASK_WDOGINT		INTMASK_WDOGINT
-#define IRQMASK_SOFTINT		INTMASK_SOFTINT
-#define IRQMASK_COMMRx 		INTMASK_COMMRx
-#define IRQMASK_COMMTx 		INTMASK_COMMTx
-#define IRQMASK_TIMERINT0_1	INTMASK_TIMERINT0_1
-#define IRQMASK_TIMERINT2_3	INTMASK_TIMERINT2_3
-#define IRQMASK_GPIOINT0	INTMASK_GPIOINT0
-#define IRQMASK_GPIOINT1	INTMASK_GPIOINT1
-#define IRQMASK_GPIOINT2	INTMASK_GPIOINT2
-#define IRQMASK_GPIOINT3	INTMASK_GPIOINT3
-#define IRQMASK_RTCINT 		INTMASK_RTCINT
-#define IRQMASK_SSPINT 		INTMASK_SSPINT
-#define IRQMASK_UARTINT0	INTMASK_UARTINT0
-#define IRQMASK_UARTINT1	INTMASK_UARTINT1
-#define IRQMASK_UARTINT2	INTMASK_UARTINT2
-#define IRQMASK_SCIINT 		INTMASK_SCIINT
-#define IRQMASK_CLCDINT		INTMASK_CLCDINT
-#define IRQMASK_DMAINT 		INTMASK_DMAINT
-#define IRQMASK_PWRFAILINT	INTMASK_PWRFAILINT
-#define IRQMASK_MBXINT 		INTMASK_MBXINT
-#define IRQMASK_GNDINT 		INTMASK_GNDINT
-#define IRQMASK_VICSOURCE21	INTMASK_VICSOURCE21
-#define IRQMASK_VICSOURCE22	INTMASK_VICSOURCE22
-#define IRQMASK_VICSOURCE23	INTMASK_VICSOURCE23
-#define IRQMASK_VICSOURCE24	INTMASK_VICSOURCE24
-#define IRQMASK_VICSOURCE25	INTMASK_VICSOURCE25
-#define IRQMASK_VICSOURCE26	INTMASK_VICSOURCE26
-#define IRQMASK_VICSOURCE27	INTMASK_VICSOURCE27
-#define IRQMASK_VICSOURCE28	INTMASK_VICSOURCE28
-#define IRQMASK_VICSOURCE29	INTMASK_VICSOURCE29
-#define IRQMASK_VICSOURCE30	INTMASK_VICSOURCE30
-#define IRQMASK_VICSOURCE31	INTMASK_VICSOURCE31
-
-/* 
- *  FIQ interrupts definitions are the same as the INT definitions.
- */
-#define FIQ_WDOGINT		INT_WDOGINT
-#define FIQ_SOFTINT		INT_SOFTINT
-#define FIQ_COMMRx		INT_COMMRx
-#define FIQ_COMMTx		INT_COMMTx
-#define FIQ_TIMERINT0_1		INT_TIMERINT0_1
-#define FIQ_TIMERINT2_3		INT_TIMERINT2_3
-#define FIQ_GPIOINT0		INT_GPIOINT0
-#define FIQ_GPIOINT1		INT_GPIOINT1
-#define FIQ_GPIOINT2		INT_GPIOINT2
-#define FIQ_GPIOINT3		INT_GPIOINT3
-#define FIQ_RTCINT		INT_RTCINT
-#define FIQ_SSPINT		INT_SSPINT
-#define FIQ_UARTINT0		INT_UARTINT0
-#define FIQ_UARTINT1		INT_UARTINT1
-#define FIQ_UARTINT2		INT_UARTINT2
-#define FIQ_SCIINT		INT_SCIINT
-#define FIQ_CLCDINT		INT_CLCDINT
-#define FIQ_DMAINT		INT_DMAINT
-#define FIQ_PWRFAILINT 		INT_PWRFAILINT
-#define FIQ_MBXINT		INT_MBXINT
-#define FIQ_GNDINT		INT_GNDINT
-#define FIQ_VICSOURCE21		INT_VICSOURCE21
-#define FIQ_VICSOURCE22		INT_VICSOURCE22
-#define FIQ_VICSOURCE23		INT_VICSOURCE23
-#define FIQ_VICSOURCE24		INT_VICSOURCE24
-#define FIQ_VICSOURCE25		INT_VICSOURCE25
-#define FIQ_VICSOURCE26		INT_VICSOURCE26
-#define FIQ_VICSOURCE27		INT_VICSOURCE27
-#define FIQ_VICSOURCE28		INT_VICSOURCE28
-#define FIQ_VICSOURCE29		INT_VICSOURCE29
-#define FIQ_VICSOURCE30		INT_VICSOURCE30
-#define FIQ_VICSOURCE31		INT_VICSOURCE31
-
-
-#define FIQMASK_WDOGINT		INTMASK_WDOGINT
-#define FIQMASK_SOFTINT		INTMASK_SOFTINT
-#define FIQMASK_COMMRx 		INTMASK_COMMRx
-#define FIQMASK_COMMTx 		INTMASK_COMMTx
-#define FIQMASK_TIMERINT0_1	INTMASK_TIMERINT0_1
-#define FIQMASK_TIMERINT2_3	INTMASK_TIMERINT2_3
-#define FIQMASK_GPIOINT0	INTMASK_GPIOINT0
-#define FIQMASK_GPIOINT1	INTMASK_GPIOINT1
-#define FIQMASK_GPIOINT2	INTMASK_GPIOINT2
-#define FIQMASK_GPIOINT3	INTMASK_GPIOINT3
-#define FIQMASK_RTCINT 		INTMASK_RTCINT
-#define FIQMASK_SSPINT 		INTMASK_SSPINT
-#define FIQMASK_UARTINT0	INTMASK_UARTINT0
-#define FIQMASK_UARTINT1	INTMASK_UARTINT1
-#define FIQMASK_UARTINT2	INTMASK_UARTINT2
-#define FIQMASK_SCIINT 		INTMASK_SCIINT
-#define FIQMASK_CLCDINT		INTMASK_CLCDINT
-#define FIQMASK_DMAINT 		INTMASK_DMAINT
-#define FIQMASK_PWRFAILINT	INTMASK_PWRFAILINT
-#define FIQMASK_MBXINT 		INTMASK_MBXINT
-#define FIQMASK_GNDINT 		INTMASK_GNDINT
-#define FIQMASK_VICSOURCE21	INTMASK_VICSOURCE21
-#define FIQMASK_VICSOURCE22	INTMASK_VICSOURCE22
-#define FIQMASK_VICSOURCE23	INTMASK_VICSOURCE23
-#define FIQMASK_VICSOURCE24	INTMASK_VICSOURCE24
-#define FIQMASK_VICSOURCE25	INTMASK_VICSOURCE25
-#define FIQMASK_VICSOURCE26	INTMASK_VICSOURCE26
-#define FIQMASK_VICSOURCE27	INTMASK_VICSOURCE27
-#define FIQMASK_VICSOURCE28	INTMASK_VICSOURCE28
-#define FIQMASK_VICSOURCE29	INTMASK_VICSOURCE29
-#define FIQMASK_VICSOURCE30	INTMASK_VICSOURCE30
-#define FIQMASK_VICSOURCE31	INTMASK_VICSOURCE31
-
-/*
- * Secondary interrupt controller
- */
-#define IRQ_SIC_START		32
-#define IRQ_SIC_MMCI0B 		(IRQ_SIC_START + SIC_INT_MMCI0B)
-#define IRQ_SIC_MMCI1B 		(IRQ_SIC_START + SIC_INT_MMCI1B)
-#define IRQ_SIC_KMI0		(IRQ_SIC_START + SIC_INT_KMI0)
-#define IRQ_SIC_KMI1		(IRQ_SIC_START + SIC_INT_KMI1)
-#define IRQ_SIC_SCI3		(IRQ_SIC_START + SIC_INT_SCI3)
-#define IRQ_SIC_UART3		(IRQ_SIC_START + SIC_INT_UART3)
-#define IRQ_SIC_CLCD		(IRQ_SIC_START + SIC_INT_CLCD)
-#define IRQ_SIC_TOUCH		(IRQ_SIC_START + SIC_INT_TOUCH)
-#define IRQ_SIC_KEYPAD 		(IRQ_SIC_START + SIC_INT_KEYPAD)
-#define IRQ_SIC_DoC		(IRQ_SIC_START + SIC_INT_DoC)
-#define IRQ_SIC_MMCI0A 		(IRQ_SIC_START + SIC_INT_MMCI0A)
-#define IRQ_SIC_MMCI1A 		(IRQ_SIC_START + SIC_INT_MMCI1A)
-#define IRQ_SIC_AACI		(IRQ_SIC_START + SIC_INT_AACI)
-#define IRQ_SIC_ETH		(IRQ_SIC_START + SIC_INT_ETH)
-#define IRQ_SIC_USB		(IRQ_SIC_START + SIC_INT_USB)
-#define IRQ_SIC_PCI0		(IRQ_SIC_START + SIC_INT_PCI0)
-#define IRQ_SIC_PCI1		(IRQ_SIC_START + SIC_INT_PCI1)
-#define IRQ_SIC_PCI2		(IRQ_SIC_START + SIC_INT_PCI2)
-#define IRQ_SIC_PCI3		(IRQ_SIC_START + SIC_INT_PCI3)
-#define IRQ_SIC_END		63
-
-#define SIC_IRQMASK_MMCI0B	SIC_INTMASK_MMCI0B
-#define SIC_IRQMASK_MMCI1B	SIC_INTMASK_MMCI1B
-#define SIC_IRQMASK_KMI0	SIC_INTMASK_KMI0
-#define SIC_IRQMASK_KMI1	SIC_INTMASK_KMI1
-#define SIC_IRQMASK_SCI3	SIC_INTMASK_SCI3
-#define SIC_IRQMASK_UART3	SIC_INTMASK_UART3
-#define SIC_IRQMASK_CLCD	SIC_INTMASK_CLCD
-#define SIC_IRQMASK_TOUCH	SIC_INTMASK_TOUCH
-#define SIC_IRQMASK_KEYPAD	SIC_INTMASK_KEYPAD
-#define SIC_IRQMASK_DoC		SIC_INTMASK_DoC
-#define SIC_IRQMASK_MMCI0A	SIC_INTMASK_MMCI0A
-#define SIC_IRQMASK_MMCI1A	SIC_INTMASK_MMCI1A
-#define SIC_IRQMASK_AACI	SIC_INTMASK_AACI
-#define SIC_IRQMASK_ETH		SIC_INTMASK_ETH
-#define SIC_IRQMASK_USB		SIC_INTMASK_USB
-#define SIC_IRQMASK_PCI0	SIC_INTMASK_PCI0
-#define SIC_IRQMASK_PCI1	SIC_INTMASK_PCI1
-#define SIC_IRQMASK_PCI2	SIC_INTMASK_PCI2
-#define SIC_IRQMASK_PCI3	SIC_INTMASK_PCI3
-
-#define NR_IRQS			64
diff --git a/include/asm-arm/arch-versatile/memory.h b/include/asm-arm/arch-versatile/memory.h
deleted file mode 100644
index a937097..0000000
--- a/include/asm-arm/arch-versatile/memory.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/memory.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x00000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
-#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
-
-#endif
diff --git a/include/asm-arm/arch-versatile/platform.h b/include/asm-arm/arch-versatile/platform.h
deleted file mode 100644
index 2af9d7c..0000000
--- a/include/asm-arm/arch-versatile/platform.h
+++ /dev/null
@@ -1,510 +0,0 @@
-/*
- * linux/include/asm-arm/arch-versatile/platform.h
- *
- * Copyright (c) ARM Limited 2003.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __address_h
-#define __address_h                     1
-
-/*
- * Memory definitions
- */
-#define VERSATILE_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
-#define VERSATILE_BOOT_ROM_HI          0x30000000
-#define VERSATILE_BOOT_ROM_BASE        VERSATILE_BOOT_ROM_HI	 /*  Normal position */
-#define VERSATILE_BOOT_ROM_SIZE        SZ_64M
-
-#define VERSATILE_SSRAM_BASE           /* VERSATILE_SSMC_BASE ? */
-#define VERSATILE_SSRAM_SIZE           SZ_2M
-
-#define VERSATILE_FLASH_BASE           0x34000000
-#define VERSATILE_FLASH_SIZE           SZ_64M
-
-/* 
- *  SDRAM
- */
-#define VERSATILE_SDRAM_BASE           0x00000000
-
-/* 
- *  Logic expansion modules
- * 
- */
-
-
-/* ------------------------------------------------------------------------
- *  Versatile Registers
- * ------------------------------------------------------------------------
- * 
- */
-#define VERSATILE_SYS_ID_OFFSET               0x00
-#define VERSATILE_SYS_SW_OFFSET               0x04
-#define VERSATILE_SYS_LED_OFFSET              0x08
-#define VERSATILE_SYS_OSC0_OFFSET             0x0C
-
-#if defined(CONFIG_ARCH_VERSATILE_PB)
-#define VERSATILE_SYS_OSC1_OFFSET             0x10
-#define VERSATILE_SYS_OSC2_OFFSET             0x14
-#define VERSATILE_SYS_OSC3_OFFSET             0x18
-#define VERSATILE_SYS_OSC4_OFFSET             0x1C
-#elif defined(CONFIG_MACH_VERSATILE_AB)
-#define VERSATILE_SYS_OSC1_OFFSET             0x1C
-#endif
-
-#define VERSATILE_SYS_OSCCLCD_OFFSET          0x1c
-
-#define VERSATILE_SYS_LOCK_OFFSET             0x20
-#define VERSATILE_SYS_100HZ_OFFSET            0x24
-#define VERSATILE_SYS_CFGDATA1_OFFSET         0x28
-#define VERSATILE_SYS_CFGDATA2_OFFSET         0x2C
-#define VERSATILE_SYS_FLAGS_OFFSET            0x30
-#define VERSATILE_SYS_FLAGSSET_OFFSET         0x30
-#define VERSATILE_SYS_FLAGSCLR_OFFSET         0x34
-#define VERSATILE_SYS_NVFLAGS_OFFSET          0x38
-#define VERSATILE_SYS_NVFLAGSSET_OFFSET       0x38
-#define VERSATILE_SYS_NVFLAGSCLR_OFFSET       0x3C
-#define VERSATILE_SYS_RESETCTL_OFFSET         0x40
-#define VERSATILE_SYS_PCICTL_OFFSET           0x44
-#define VERSATILE_SYS_MCI_OFFSET              0x48
-#define VERSATILE_SYS_FLASH_OFFSET            0x4C
-#define VERSATILE_SYS_CLCD_OFFSET             0x50
-#define VERSATILE_SYS_CLCDSER_OFFSET          0x54
-#define VERSATILE_SYS_BOOTCS_OFFSET           0x58
-#define VERSATILE_SYS_24MHz_OFFSET            0x5C
-#define VERSATILE_SYS_MISC_OFFSET             0x60
-#define VERSATILE_SYS_TEST_OSC0_OFFSET        0x80
-#define VERSATILE_SYS_TEST_OSC1_OFFSET        0x84
-#define VERSATILE_SYS_TEST_OSC2_OFFSET        0x88
-#define VERSATILE_SYS_TEST_OSC3_OFFSET        0x8C
-#define VERSATILE_SYS_TEST_OSC4_OFFSET        0x90
-
-#define VERSATILE_SYS_BASE                    0x10000000
-#define VERSATILE_SYS_ID                      (VERSATILE_SYS_BASE + VERSATILE_SYS_ID_OFFSET)
-#define VERSATILE_SYS_SW                      (VERSATILE_SYS_BASE + VERSATILE_SYS_SW_OFFSET)
-#define VERSATILE_SYS_LED                     (VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET)
-#define VERSATILE_SYS_OSC0                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC0_OFFSET)
-#define VERSATILE_SYS_OSC1                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC1_OFFSET)
-
-#if defined(CONFIG_ARCH_VERSATILE_PB)
-#define VERSATILE_SYS_OSC2                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC2_OFFSET)
-#define VERSATILE_SYS_OSC3                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC3_OFFSET)
-#define VERSATILE_SYS_OSC4                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC4_OFFSET)
-#endif
-
-#define VERSATILE_SYS_LOCK                    (VERSATILE_SYS_BASE + VERSATILE_SYS_LOCK_OFFSET)
-#define VERSATILE_SYS_100HZ                   (VERSATILE_SYS_BASE + VERSATILE_SYS_100HZ_OFFSET)
-#define VERSATILE_SYS_CFGDATA1                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA1_OFFSET)
-#define VERSATILE_SYS_CFGDATA2                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA2_OFFSET)
-#define VERSATILE_SYS_FLAGS                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGS_OFFSET)
-#define VERSATILE_SYS_FLAGSSET                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSSET_OFFSET)
-#define VERSATILE_SYS_FLAGSCLR                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSCLR_OFFSET)
-#define VERSATILE_SYS_NVFLAGS                 (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGS_OFFSET)
-#define VERSATILE_SYS_NVFLAGSSET              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSSET_OFFSET)
-#define VERSATILE_SYS_NVFLAGSCLR              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSCLR_OFFSET)
-#define VERSATILE_SYS_RESETCTL                (VERSATILE_SYS_BASE + VERSATILE_SYS_RESETCTL_OFFSET)
-#define VERSATILE_SYS_PCICTL                  (VERSATILE_SYS_BASE + VERSATILE_SYS_PCICTL_OFFSET)
-#define VERSATILE_SYS_MCI                     (VERSATILE_SYS_BASE + VERSATILE_SYS_MCI_OFFSET)
-#define VERSATILE_SYS_FLASH                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET)
-#define VERSATILE_SYS_CLCD                    (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCD_OFFSET)
-#define VERSATILE_SYS_CLCDSER                 (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCDSER_OFFSET)
-#define VERSATILE_SYS_BOOTCS                  (VERSATILE_SYS_BASE + VERSATILE_SYS_BOOTCS_OFFSET)
-#define VERSATILE_SYS_24MHz                   (VERSATILE_SYS_BASE + VERSATILE_SYS_24MHz_OFFSET)
-#define VERSATILE_SYS_MISC                    (VERSATILE_SYS_BASE + VERSATILE_SYS_MISC_OFFSET)
-#define VERSATILE_SYS_TEST_OSC0               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC0_OFFSET)
-#define VERSATILE_SYS_TEST_OSC1               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC1_OFFSET)
-#define VERSATILE_SYS_TEST_OSC2               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC2_OFFSET)
-#define VERSATILE_SYS_TEST_OSC3               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC3_OFFSET)
-#define VERSATILE_SYS_TEST_OSC4               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC4_OFFSET)
-
-/* 
- * Values for VERSATILE_SYS_RESET_CTRL
- */
-#define VERSATILE_SYS_CTRL_RESET_CONFIGCLR    0x01
-#define VERSATILE_SYS_CTRL_RESET_CONFIGINIT   0x02
-#define VERSATILE_SYS_CTRL_RESET_DLLRESET     0x03
-#define VERSATILE_SYS_CTRL_RESET_PLLRESET     0x04
-#define VERSATILE_SYS_CTRL_RESET_POR          0x05
-#define VERSATILE_SYS_CTRL_RESET_DoC          0x06
-
-#define VERSATILE_SYS_CTRL_LED         (1 << 0)
-
-
-/* ------------------------------------------------------------------------
- *  Versatile control registers
- * ------------------------------------------------------------------------
- */
-
-/* 
- * VERSATILE_IDFIELD
- *
- * 31:24 = manufacturer (0x41 = ARM)
- * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
- * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
- * 11:4  = build value
- * 3:0   = revision number (0x1 = rev B (AHB))
- */
-
-/*
- * VERSATILE_SYS_LOCK
- *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
- *     SYS_CLD, SYS_BOOTCS
- */
-#define VERSATILE_SYS_LOCK_LOCKED    (1 << 16)
-#define VERSATILE_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
-
-/*
- * VERSATILE_SYS_FLASH
- */
-#define VERSATILE_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
-
-/*
- * VERSATILE_INTREG
- *     - used to acknowledge and control MMCI and UART interrupts 
- */
-#define VERSATILE_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
-#define VERSATILE_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
-#define VERSATILE_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
-                                                /* write 1 to acknowledge and clear               */
-#define VERSATILE_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
-#define VERSATILE_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
-
-/*
- * VERSATILE peripheral addresses
- */
-#define VERSATILE_PCI_CORE_BASE        0x10001000	/* PCI core control */
-#define VERSATILE_I2C_BASE             0x10002000	/* I2C control */
-#define VERSATILE_SIC_BASE             0x10003000	/* Secondary interrupt controller */
-#define VERSATILE_AACI_BASE            0x10004000	/* Audio */
-#define VERSATILE_MMCI0_BASE           0x10005000	/* MMC interface */
-#define VERSATILE_KMI0_BASE            0x10006000	/* KMI interface */
-#define VERSATILE_KMI1_BASE            0x10007000	/* KMI 2nd interface */
-#define VERSATILE_CHAR_LCD_BASE        0x10008000	/* Character LCD */
-#define VERSATILE_UART3_BASE           0x10009000	/* UART 3 */
-#define VERSATILE_SCI1_BASE            0x1000A000
-#define VERSATILE_MMCI1_BASE           0x1000B000    /* MMC Interface */
-	/* 0x1000C000 - 0x1000CFFF = reserved */
-#define VERSATILE_ETH_BASE             0x10010000	/* Ethernet */
-#define VERSATILE_USB_BASE             0x10020000	/* USB */
-	/* 0x10030000 - 0x100FFFFF = reserved */
-#define VERSATILE_SMC_BASE             0x10100000	/* SMC */
-#define VERSATILE_MPMC_BASE            0x10110000	/* MPMC */
-#define VERSATILE_CLCD_BASE            0x10120000	/* CLCD */
-#define VERSATILE_DMAC_BASE            0x10130000	/* DMA controller */
-#define VERSATILE_VIC_BASE             0x10140000	/* Vectored interrupt controller */
-#define VERSATILE_PERIPH_BASE          0x10150000    /* off-chip peripherals alias from */
-                                                /* 0x10000000 - 0x100FFFFF */
-#define VERSATILE_AHBM_BASE            0x101D0000	/* AHB monitor */
-#define VERSATILE_SCTL_BASE            0x101E0000	/* System controller */
-#define VERSATILE_WATCHDOG_BASE        0x101E1000	/* Watchdog */
-#define VERSATILE_TIMER0_1_BASE        0x101E2000	/* Timer 0 and 1 */
-#define VERSATILE_TIMER2_3_BASE        0x101E3000	/* Timer 2 and 3 */
-#define VERSATILE_GPIO0_BASE           0x101E4000	/* GPIO port 0 */
-#define VERSATILE_GPIO1_BASE           0x101E5000    /* GPIO port 1 */
-#define VERSATILE_GPIO2_BASE           0x101E6000	/* GPIO port 2 */
-#define VERSATILE_GPIO3_BASE           0x101E7000	/* GPIO port 3 */
-#define VERSATILE_RTC_BASE             0x101E8000	/* Real Time Clock */
-	/* 0x101E9000 - reserved */
-#define VERSATILE_SCI_BASE             0x101F0000	/* Smart card controller */
-#define VERSATILE_UART0_BASE           0x101F1000	/* Uart 0 */
-#define VERSATILE_UART1_BASE           0x101F2000	/* Uart 1 */
-#define VERSATILE_UART2_BASE           0x101F3000	/* Uart 2 */
-#define VERSATILE_SSP_BASE             0x101F4000	/* Synchronous Serial Port */
-
-#define VERSATILE_SSMC_BASE            0x20000000	/* SSMC */
-#define VERSATILE_IB2_BASE             0x24000000	/* IB2 module */
-#define VERSATILE_MBX_BASE             0x40000000	/* MBX */
-
-/* PCI space */
-#define VERSATILE_PCI_BASE             0x41000000	/* PCI Interface */
-#define VERSATILE_PCI_CFG_BASE	       0x42000000
-#define VERSATILE_PCI_MEM_BASE0        0x44000000
-#define VERSATILE_PCI_MEM_BASE1        0x50000000
-#define VERSATILE_PCI_MEM_BASE2        0x60000000
-/* Sizes of above maps */
-#define VERSATILE_PCI_BASE_SIZE	       0x01000000
-#define VERSATILE_PCI_CFG_BASE_SIZE    0x02000000
-#define VERSATILE_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
-#define VERSATILE_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
-#define VERSATILE_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
-
-#define VERSATILE_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
-#define VERSATILE_LT_BASE              0x80000000	/* Logic Tile expansion */
-
-/*
- * Disk on Chip
- */
-#define VERSATILE_DOC_BASE             0x2C000000
-#define VERSATILE_DOC_SIZE             (16 << 20)
-#define VERSATILE_DOC_PAGE_SIZE        512
-#define VERSATILE_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
-
-#define ERASE_UNIT_PAGES    32
-#define START_PAGE          0x80
-
-/* 
- *  LED settings, bits [7:0]
- */
-#define VERSATILE_SYS_LED0             (1 << 0)
-#define VERSATILE_SYS_LED1             (1 << 1)
-#define VERSATILE_SYS_LED2             (1 << 2)
-#define VERSATILE_SYS_LED3             (1 << 3)
-#define VERSATILE_SYS_LED4             (1 << 4)
-#define VERSATILE_SYS_LED5             (1 << 5)
-#define VERSATILE_SYS_LED6             (1 << 6)
-#define VERSATILE_SYS_LED7             (1 << 7)
-
-#define ALL_LEDS                  0xFF
-
-#define LED_BANK                  VERSATILE_SYS_LED
-
-/* 
- * Control registers
- */
-#define VERSATILE_IDFIELD_OFFSET	0x0	/* Versatile build information */
-#define VERSATILE_FLASHPROG_OFFSET	0x4	/* Flash devices */
-#define VERSATILE_INTREG_OFFSET		0x8	/* Interrupt control */
-#define VERSATILE_DECODE_OFFSET		0xC	/* Fitted logic modules */
-
-
-/* ------------------------------------------------------------------------
- *  Versatile Interrupt Controller - control registers
- * ------------------------------------------------------------------------
- * 
- *  Offsets from interrupt controller base 
- * 
- *  System Controller interrupt controller base is
- * 
- * 	VERSATILE_IC_BASE
- * 
- *  Core Module interrupt controller base is
- * 
- * 	VERSATILE_SYS_IC 
- * 
- */
-/* VIC definitions in include/asm-arm/hardware/vic.h */
-
-#define SIC_IRQ_STATUS                  0
-#define SIC_IRQ_RAW_STATUS              0x04
-#define SIC_IRQ_ENABLE                  0x08
-#define SIC_IRQ_ENABLE_SET              0x08
-#define SIC_IRQ_ENABLE_CLEAR            0x0C
-#define SIC_INT_SOFT_SET                0x10
-#define SIC_INT_SOFT_CLEAR              0x14
-#define SIC_INT_PIC_ENABLE              0x20	/* read status of pass through mask */
-#define SIC_INT_PIC_ENABLES             0x20	/* set interrupt pass through bits */
-#define SIC_INT_PIC_ENABLEC             0x24	/* Clear interrupt pass through bits */
-
-/* ------------------------------------------------------------------------
- *  Interrupts - bit assignment (primary)
- * ------------------------------------------------------------------------
- */
-
-#define INT_WDOGINT                     0	/* Watchdog timer */
-#define INT_SOFTINT                     1	/* Software interrupt */
-#define INT_COMMRx                      2	/* Debug Comm Rx interrupt */
-#define INT_COMMTx                      3	/* Debug Comm Tx interrupt */
-#define INT_TIMERINT0_1                 4	/* Timer 0 and 1 */
-#define INT_TIMERINT2_3                 5	/* Timer 2 and 3 */
-#define INT_GPIOINT0                    6	/* GPIO 0 */
-#define INT_GPIOINT1                    7	/* GPIO 1 */
-#define INT_GPIOINT2                    8	/* GPIO 2 */
-#define INT_GPIOINT3                    9	/* GPIO 3 */
-#define INT_RTCINT                      10	/* Real Time Clock */
-#define INT_SSPINT                      11	/* Synchronous Serial Port */
-#define INT_UARTINT0                    12	/* UART 0 on development chip */
-#define INT_UARTINT1                    13	/* UART 1 on development chip */
-#define INT_UARTINT2                    14	/* UART 2 on development chip */
-#define INT_SCIINT                      15	/* Smart Card Interface */
-#define INT_CLCDINT                     16	/* CLCD controller */
-#define INT_DMAINT                      17	/* DMA controller */
-#define INT_PWRFAILINT                  18	/* Power failure */
-#define INT_MBXINT                      19	/* Graphics processor */
-#define INT_GNDINT                      20	/* Reserved */
-	/* External interrupt signals from logic tiles or secondary controller */
-#define INT_VICSOURCE21                 21	/* Disk on Chip */
-#define INT_VICSOURCE22                 22	/* MCI0A */
-#define INT_VICSOURCE23                 23	/* MCI1A */
-#define INT_VICSOURCE24                 24	/* AACI */
-#define INT_VICSOURCE25                 25	/* Ethernet */
-#define INT_VICSOURCE26                 26	/* USB */
-#define INT_VICSOURCE27                 27	/* PCI 0 */
-#define INT_VICSOURCE28                 28	/* PCI 1 */
-#define INT_VICSOURCE29                 29	/* PCI 2 */
-#define INT_VICSOURCE30                 30	/* PCI 3 */
-#define INT_VICSOURCE31                 31	/* SIC source */
-
-/* 
- *  Interrupt bit positions
- * 
- */
-#define INTMASK_WDOGINT                 (1 << INT_WDOGINT)
-#define INTMASK_SOFTINT                 (1 << INT_SOFTINT)
-#define INTMASK_COMMRx                  (1 << INT_COMMRx)
-#define INTMASK_COMMTx                  (1 << INT_COMMTx)
-#define INTMASK_TIMERINT0_1             (1 << INT_TIMERINT0_1)
-#define INTMASK_TIMERINT2_3             (1 << INT_TIMERINT2_3)
-#define INTMASK_GPIOINT0                (1 << INT_GPIOINT0)
-#define INTMASK_GPIOINT1                (1 << INT_GPIOINT1)
-#define INTMASK_GPIOINT2                (1 << INT_GPIOINT2)
-#define INTMASK_GPIOINT3                (1 << INT_GPIOINT3)
-#define INTMASK_RTCINT                  (1 << INT_RTCINT)
-#define INTMASK_SSPINT                  (1 << INT_SSPINT)
-#define INTMASK_UARTINT0                (1 << INT_UARTINT0)
-#define INTMASK_UARTINT1                (1 << INT_UARTINT1)
-#define INTMASK_UARTINT2                (1 << INT_UARTINT2)
-#define INTMASK_SCIINT                  (1 << INT_SCIINT)
-#define INTMASK_CLCDINT                 (1 << INT_CLCDINT)
-#define INTMASK_DMAINT                  (1 << INT_DMAINT)
-#define INTMASK_PWRFAILINT              (1 << INT_PWRFAILINT)
-#define INTMASK_MBXINT                  (1 << INT_MBXINT)
-#define INTMASK_GNDINT                  (1 << INT_GNDINT)
-#define INTMASK_VICSOURCE21             (1 << INT_VICSOURCE21)
-#define INTMASK_VICSOURCE22             (1 << INT_VICSOURCE22)
-#define INTMASK_VICSOURCE23             (1 << INT_VICSOURCE23)
-#define INTMASK_VICSOURCE24             (1 << INT_VICSOURCE24)
-#define INTMASK_VICSOURCE25             (1 << INT_VICSOURCE25)
-#define INTMASK_VICSOURCE26             (1 << INT_VICSOURCE26)
-#define INTMASK_VICSOURCE27             (1 << INT_VICSOURCE27)
-#define INTMASK_VICSOURCE28             (1 << INT_VICSOURCE28)
-#define INTMASK_VICSOURCE29             (1 << INT_VICSOURCE29)
-#define INTMASK_VICSOURCE30             (1 << INT_VICSOURCE30)
-#define INTMASK_VICSOURCE31             (1 << INT_VICSOURCE31)
-
-
-#define VERSATILE_SC_VALID_INT               0x003FFFFF
-
-#define MAXIRQNUM                       31
-#define MAXFIQNUM                       31
-#define MAXSWINUM                       31
-
-/* ------------------------------------------------------------------------
- *  Interrupts - bit assignment (secondary)
- * ------------------------------------------------------------------------
- */
-#define SIC_INT_MMCI0B                  1	/* Multimedia Card 0B */
-#define SIC_INT_MMCI1B                  2	/* Multimedia Card 1B */
-#define SIC_INT_KMI0                    3	/* Keyboard/Mouse port 0 */
-#define SIC_INT_KMI1                    4	/* Keyboard/Mouse port 1 */
-#define SIC_INT_SCI3                    5	/* Smart Card interface */
-#define SIC_INT_UART3                   6	/* UART 3 empty or data available */
-#define SIC_INT_CLCD                    7	/* Character LCD */
-#define SIC_INT_TOUCH                   8	/* Touchscreen */
-#define SIC_INT_KEYPAD                  9	/* Key pressed on display keypad */
-	/* 10:20 - reserved */
-#define SIC_INT_DoC                     21	/* Disk on Chip memory controller */
-#define SIC_INT_MMCI0A                  22	/* MMC 0A */
-#define SIC_INT_MMCI1A                  23	/* MMC 1A */
-#define SIC_INT_AACI                    24	/* Audio Codec */
-#define SIC_INT_ETH                     25	/* Ethernet controller */
-#define SIC_INT_USB                     26	/* USB controller */
-#define SIC_INT_PCI0                    27
-#define SIC_INT_PCI1                    28
-#define SIC_INT_PCI2                    29
-#define SIC_INT_PCI3                    30
-
-
-#define SIC_INTMASK_MMCI0B              (1 << SIC_INT_MMCI0B)
-#define SIC_INTMASK_MMCI1B              (1 << SIC_INT_MMCI1B)
-#define SIC_INTMASK_KMI0                (1 << SIC_INT_KMI0)
-#define SIC_INTMASK_KMI1                (1 << SIC_INT_KMI1)
-#define SIC_INTMASK_SCI3                (1 << SIC_INT_SCI3)
-#define SIC_INTMASK_UART3               (1 << SIC_INT_UART3)
-#define SIC_INTMASK_CLCD                (1 << SIC_INT_CLCD)
-#define SIC_INTMASK_TOUCH               (1 << SIC_INT_TOUCH)
-#define SIC_INTMASK_KEYPAD              (1 << SIC_INT_KEYPAD)
-#define SIC_INTMASK_DoC                 (1 << SIC_INT_DoC)
-#define SIC_INTMASK_MMCI0A              (1 << SIC_INT_MMCI0A)
-#define SIC_INTMASK_MMCI1A              (1 << SIC_INT_MMCI1A)
-#define SIC_INTMASK_AACI                (1 << SIC_INT_AACI)
-#define SIC_INTMASK_ETH                 (1 << SIC_INT_ETH)
-#define SIC_INTMASK_USB                 (1 << SIC_INT_USB)
-#define SIC_INTMASK_PCI0                (1 << SIC_INT_PCI0)
-#define SIC_INTMASK_PCI1                (1 << SIC_INT_PCI1)
-#define SIC_INTMASK_PCI2                (1 << SIC_INT_PCI2)
-#define SIC_INTMASK_PCI3                (1 << SIC_INT_PCI3)
-/* 
- *  Application Flash
- * 
- */
-#define FLASH_BASE                      VERSATILE_FLASH_BASE
-#define FLASH_SIZE                      VERSATILE_FLASH_SIZE
-#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
-#define FLASH_BLOCK_SIZE                SZ_128K
-
-/* 
- *  Boot Flash
- * 
- */
-#define EPROM_BASE                      VERSATILE_BOOT_ROM_HI
-#define EPROM_SIZE                      VERSATILE_BOOT_ROM_SIZE
-#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
-
-/* 
- *  Clean base - dummy
- * 
- */
-#define CLEAN_BASE                      EPROM_BASE
-
-/*
- * System controller bit assignment
- */
-#define VERSATILE_REFCLK	0
-#define VERSATILE_TIMCLK	1
-
-#define VERSATILE_TIMER1_EnSel	15
-#define VERSATILE_TIMER2_EnSel	17
-#define VERSATILE_TIMER3_EnSel	19
-#define VERSATILE_TIMER4_EnSel	21
-
-
-#define MAX_TIMER                       2
-#define MAX_PERIOD                      699050
-#define TICKS_PER_uSEC                  1
-
-/* 
- *  These are useconds NOT ticks.  
- * 
- */
-#define mSEC_1                          1000
-#define mSEC_5                          (mSEC_1 * 5)
-#define mSEC_10                         (mSEC_1 * 10)
-#define mSEC_25                         (mSEC_1 * 25)
-#define SEC_1                           (mSEC_1 * 1000)
-
-#define VERSATILE_CSR_BASE             0x10000000
-#define VERSATILE_CSR_SIZE             0x10000000
-
-#ifdef CONFIG_MACH_VERSATILE_AB
-/*
- * IB2 Versatile/AB expansion board definitions
- */
-#define VERSATILE_IB2_CAMERA_BANK	VERSATILE_IB2_BASE
-#define VERSATILE_IB2_KBD_DATAREG	(VERSATILE_IB2_BASE + 0x01000000)
-
-/* VICINTSOURCE27 */
-#define VERSATILE_IB2_INT_BASE		(VERSATILE_IB2_BASE + 0x02000000)
-#define VERSATILE_IB2_IER		(VERSATILE_IB2_INT_BASE + 0)
-#define VERSATILE_IB2_ISR		(VERSATILE_IB2_INT_BASE + 4)
-
-#define VERSATILE_IB2_CTL_BASE		(VERSATILE_IB2_BASE + 0x03000000)
-#define VERSATILE_IB2_CTRL		(VERSATILE_IB2_CTL_BASE + 0)
-#define VERSATILE_IB2_STAT		(VERSATILE_IB2_CTL_BASE + 4)
-#endif
-
-#endif
-
-/* 	END */
diff --git a/include/asm-arm/arch-versatile/system.h b/include/asm-arm/arch-versatile/system.h
deleted file mode 100644
index 3ea4e07..0000000
--- a/include/asm-arm/arch-versatile/system.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/system.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-#include <asm/arch/platform.h>
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	u32 val;
-
-	val = __raw_readl(IO_ADDRESS(VERSATILE_SYS_RESETCTL)) & ~0x7;
-	val |= 0x105;
-
-	__raw_writel(0xa05f, IO_ADDRESS(VERSATILE_SYS_LOCK));
-	__raw_writel(val, IO_ADDRESS(VERSATILE_SYS_RESETCTL));
-	__raw_writel(0, IO_ADDRESS(VERSATILE_SYS_LOCK));
-}
-
-#endif
diff --git a/include/asm-arm/arch-versatile/timex.h b/include/asm-arm/arch-versatile/timex.h
deleted file mode 100644
index 38fd04f..0000000
--- a/include/asm-arm/arch-versatile/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/timex.h
- *
- *  Versatile architecture timex specifications
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/include/asm-arm/arch-versatile/uncompress.h b/include/asm-arm/arch-versatile/uncompress.h
deleted file mode 100644
index 7215133..0000000
--- a/include/asm-arm/arch-versatile/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/uncompress.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define AMBA_UART_DR	(*(volatile unsigned char *)0x101F1000)
-#define AMBA_UART_LCRH	(*(volatile unsigned char *)0x101F102C)
-#define AMBA_UART_CR	(*(volatile unsigned char *)0x101F1030)
-#define AMBA_UART_FR	(*(volatile unsigned char *)0x101F1018)
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	while (AMBA_UART_FR & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR = c;
-}
-
-static inline void flush(void)
-{
-	while (AMBA_UART_FR & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-versatile/vmalloc.h b/include/asm-arm/arch-versatile/vmalloc.h
deleted file mode 100644
index ac780df6..0000000
--- a/include/asm-arm/arch-versatile/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/vmalloc.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END		(PAGE_OFFSET + 0x18000000)
diff --git a/include/asm-arm/plat-s3c/iic.h b/include/asm-arm/plat-s3c/iic.h
index d08a1f2..5106aca 100644
--- a/include/asm-arm/plat-s3c/iic.h
+++ b/include/asm-arm/plat-s3c/iic.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/iic.h
+/* arch/arm/mach-s3c2410/include/mach/iic.h
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/plat-s3c/nand.h b/include/asm-arm/plat-s3c/nand.h
index ad6bbe90..f4dcd14 100644
--- a/include/asm-arm/plat-s3c/nand.h
+++ b/include/asm-arm/plat-s3c/nand.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/nand.h
+/* arch/arm/mach-s3c2410/include/mach/nand.h
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/plat-s3c/regs-ac97.h b/include/asm-arm/plat-s3c/regs-ac97.h
index b004dee..c3878f7 100644
--- a/include/asm-arm/plat-s3c/regs-ac97.h
+++ b/include/asm-arm/plat-s3c/regs-ac97.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-ac97.h
+/* arch/arm/mach-s3c2410/include/mach/regs-ac97.h
  *
  * Copyright (c) 2006 Simtec Electronics <linux@simtec.co.uk>
  *		http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c/regs-adc.h b/include/asm-arm/plat-s3c/regs-adc.h
index c7f2319..4323ccc 100644
--- a/include/asm-arm/plat-s3c/regs-adc.h
+++ b/include/asm-arm/plat-s3c/regs-adc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-adc.h
+/* arch/arm/mach-s3c2410/include/mach/regs-adc.h
  *
  * Copyright (c) 2004 Shannon Holland <holland@loser.net>
  *
diff --git a/include/asm-arm/plat-s3c/regs-iic.h b/include/asm-arm/plat-s3c/regs-iic.h
index 2ae2952..2f7c17d 100644
--- a/include/asm-arm/plat-s3c/regs-iic.h
+++ b/include/asm-arm/plat-s3c/regs-iic.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-iic.h
+/* arch/arm/mach-s3c2410/include/mach/regs-iic.h
  *
  * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
  *		http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c/regs-nand.h b/include/asm-arm/plat-s3c/regs-nand.h
index d742205..09f0b55 100644
--- a/include/asm-arm/plat-s3c/regs-nand.h
+++ b/include/asm-arm/plat-s3c/regs-nand.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-nand.h
+/* arch/arm/mach-s3c2410/include/mach/regs-nand.h
  *
  * Copyright (c) 2004,2005 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c/regs-rtc.h b/include/asm-arm/plat-s3c/regs-rtc.h
index 93b03c4..d5837cf 100644
--- a/include/asm-arm/plat-s3c/regs-rtc.h
+++ b/include/asm-arm/plat-s3c/regs-rtc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-rtc.h
+/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h
  *
  * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c/regs-serial.h b/include/asm-arm/plat-s3c/regs-serial.h
index 923e114..a0daa64 100644
--- a/include/asm-arm/plat-s3c/regs-serial.h
+++ b/include/asm-arm/plat-s3c/regs-serial.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-serial.h
+/* arch/arm/mach-s3c2410/include/mach/regs-serial.h
  *
  *  From linux/include/asm-arm/hardware/serial_s3c2410.h
  *
diff --git a/include/asm-arm/plat-s3c/regs-timer.h b/include/asm-arm/plat-s3c/regs-timer.h
index b5bc692..b4366ea3 100644
--- a/include/asm-arm/plat-s3c/regs-timer.h
+++ b/include/asm-arm/plat-s3c/regs-timer.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-timer.h
+/* arch/arm/mach-s3c2410/include/mach/regs-timer.h
  *
  * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c/regs-watchdog.h b/include/asm-arm/plat-s3c/regs-watchdog.h
index 56c4193b..1229f07 100644
--- a/include/asm-arm/plat-s3c/regs-watchdog.h
+++ b/include/asm-arm/plat-s3c/regs-watchdog.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-watchdog.h
+/* arch/arm/mach-s3c2410/include/mach/regs-watchdog.h
  *
  * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c24xx/regs-iis.h b/include/asm-arm/plat-s3c24xx/regs-iis.h
index eaf77916..a6f1d5d 100644
--- a/include/asm-arm/plat-s3c24xx/regs-iis.h
+++ b/include/asm-arm/plat-s3c24xx/regs-iis.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-iis.h
+/* arch/arm/mach-s3c2410/include/mach/regs-iis.h
  *
  * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c24xx/regs-spi.h b/include/asm-arm/plat-s3c24xx/regs-spi.h
index ea565b0..2b35479 100644
--- a/include/asm-arm/plat-s3c24xx/regs-spi.h
+++ b/include/asm-arm/plat-s3c24xx/regs-spi.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-spi.h
+/* arch/arm/mach-s3c2410/include/mach/regs-spi.h
  *
  * Copyright (c) 2004 Fetron GmbH
  *
diff --git a/include/asm-arm/plat-s3c24xx/regs-udc.h b/include/asm-arm/plat-s3c24xx/regs-udc.h
index e1e9805d..f0dd4a41 100644
--- a/include/asm-arm/plat-s3c24xx/regs-udc.h
+++ b/include/asm-arm/plat-s3c24xx/regs-udc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-udc.h
+/* arch/arm/mach-s3c2410/include/mach/regs-udc.h
  *
  * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
  *
diff --git a/include/asm-arm/plat-s3c24xx/udc.h b/include/asm-arm/plat-s3c24xx/udc.h
index b8aa6cb..546bb40 100644
--- a/include/asm-arm/plat-s3c24xx/udc.h
+++ b/include/asm-arm/plat-s3c24xx/udc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/udc.h
+/* arch/arm/mach-s3c2410/include/mach/udc.h
  *
  * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
  *
diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index 158f7b50..199cca3 100644
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -26,10 +26,10 @@
 
 #include <asm/irq.h>
 #include <linux/mutex.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/audio.h>
 
 #include "pxa2xx-pcm.h"
 
diff --git a/sound/arm/pxa2xx-pcm.c b/sound/arm/pxa2xx-pcm.c
index 9a104e2..381094a 100644
--- a/sound/arm/pxa2xx-pcm.c
+++ b/sound/arm/pxa2xx-pcm.c
@@ -21,8 +21,8 @@
 #include <sound/pcm_params.h>
 
 #include <asm/dma.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
 
 #include "pxa2xx-pcm.h"
 
diff --git a/sound/arm/sa11xx-uda1341.c b/sound/arm/sa11xx-uda1341.c
index 40c213e7..b9c51bf 100644
--- a/sound/arm/sa11xx-uda1341.c
+++ b/sound/arm/sa11xx-uda1341.c
@@ -71,8 +71,8 @@
 #include <linux/pm.h>
 #endif
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/h3600.h>
+#include <mach/hardware.h>
+#include <mach/h3600.h>
 #include <asm/mach-types.h>
 #include <asm/dma.h>
 
diff --git a/sound/oss/vidc.c b/sound/oss/vidc.c
index 41cd4f2..725fef0 100644
--- a/sound/oss/vidc.c
+++ b/sound/oss/vidc.c
@@ -22,7 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 #include <asm/io.h>
 #include <asm/hardware/iomd.h>
diff --git a/sound/oss/vidc_fill.S b/sound/oss/vidc_fill.S
index d2cb210..bed3492 100644
--- a/sound/oss/vidc_fill.S
+++ b/sound/oss/vidc_fill.S
@@ -11,7 +11,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iomd.h>
 
 		.text
diff --git a/sound/oss/waveartist.c b/sound/oss/waveartist.c
index d84c497..c47842f 100644
--- a/sound/oss/waveartist.c
+++ b/sound/oss/waveartist.c
@@ -47,7 +47,7 @@
 #include "waveartist.h"
 
 #ifdef CONFIG_ARM
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #endif
 
diff --git a/sound/soc/at32/playpaq_wm8510.c b/sound/soc/at32/playpaq_wm8510.c
index fee5f8e..3f32621 100644
--- a/sound/soc/at32/playpaq_wm8510.c
+++ b/sound/soc/at32/playpaq_wm8510.c
@@ -36,8 +36,8 @@
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/portmux.h>
 
 #include "../codecs/wm8510.h"
 #include "at32-pcm.h"
diff --git a/sound/soc/at91/at91-pcm.c b/sound/soc/at91/at91-pcm.c
index d47492b..7ab48bd 100644
--- a/sound/soc/at91/at91-pcm.c
+++ b/sound/soc/at91/at91-pcm.c
@@ -28,8 +28,8 @@
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_ssc.h>
+#include <mach/hardware.h>
+#include <mach/at91_ssc.h>
 
 #include "at91-pcm.h"
 
diff --git a/sound/soc/at91/at91-pcm.h b/sound/soc/at91/at91-pcm.h
index 58d0f00..e5aada2 100644
--- a/sound/soc/at91/at91-pcm.h
+++ b/sound/soc/at91/at91-pcm.h
@@ -19,7 +19,7 @@
 #ifndef _AT91_PCM_H
 #define _AT91_PCM_H
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 struct at91_ssc_periph {
 	void __iomem	*base;
diff --git a/sound/soc/at91/at91-ssc.c b/sound/soc/at91/at91-ssc.c
index 090e607..5d44515 100644
--- a/sound/soc/at91/at91-ssc.c
+++ b/sound/soc/at91/at91-ssc.c
@@ -28,9 +28,9 @@
 #include <sound/initval.h>
 #include <sound/soc.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_ssc.h>
+#include <mach/hardware.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_ssc.h>
 
 #include "at91-pcm.h"
 #include "at91-ssc.h"
diff --git a/sound/soc/at91/eti_b1_wm8731.c b/sound/soc/at91/eti_b1_wm8731.c
index d61a453..b081e83 100644
--- a/sound/soc/at91/eti_b1_wm8731.c
+++ b/sound/soc/at91/eti_b1_wm8731.c
@@ -33,8 +33,8 @@
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
 
 #include "../codecs/wm8731.h"
 #include "at91-pcm.h"
diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c
index 0722eeb..65fdbd8 100644
--- a/sound/soc/davinci/davinci-evm.c
+++ b/sound/soc/davinci/davinci-evm.c
@@ -20,7 +20,7 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/dma.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include "../codecs/tlv320aic3x.h"
 #include "davinci-pcm.h"
diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c
index 02cec968..7694621 100644
--- a/sound/soc/omap/n810.c
+++ b/sound/soc/omap/n810.c
@@ -29,9 +29,9 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <linux/gpio.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/mcbsp.h>
 
 #include "omap-mcbsp.h"
 #include "omap-pcm.h"
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 00b0c9d..35310e1 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -30,9 +30,9 @@
 #include <sound/initval.h>
 #include <sound/soc.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/control.h>
+#include <mach/dma.h>
+#include <mach/mcbsp.h>
 #include "omap-mcbsp.h"
 #include "omap-pcm.h"
 
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index e092f3d..690bfeae 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -27,7 +27,7 @@
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
 
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 #include "omap-pcm.h"
 
 static const struct snd_pcm_hardware omap_pcm_hardware = {
diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index c029446..0a53f72 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -25,10 +25,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/hardware/scoop.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/audio.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/corgi.h>
+#include <mach/audio.h>
 
 #include "../codecs/wm8731.h"
 #include "pxa2xx-pcm.h"
diff --git a/sound/soc/pxa/e800_wm9712.c b/sound/soc/pxa/e800_wm9712.c
index 06e8afb..6781c5b 100644
--- a/sound/soc/pxa/e800_wm9712.c
+++ b/sound/soc/pxa/e800_wm9712.c
@@ -21,9 +21,9 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/audio.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
 
 #include "../codecs/wm9712.h"
 #include "pxa2xx-pcm.h"
diff --git a/sound/soc/pxa/em-x270.c b/sound/soc/pxa/em-x270.c
index 02dcac3..d9c3f7b 100644
--- a/sound/soc/pxa/em-x270.c
+++ b/sound/soc/pxa/em-x270.c
@@ -30,9 +30,9 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/audio.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
 
 #include "../codecs/wm9712.h"
 #include "pxa2xx-pcm.h"
diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c
index d968cf7..a4697f7 100644
--- a/sound/soc/pxa/poodle.c
+++ b/sound/soc/pxa/poodle.c
@@ -26,10 +26,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/hardware/locomo.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/poodle.h>
-#include <asm/arch/audio.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/poodle.h>
+#include <mach/audio.h>
 
 #include "../codecs/wm8731.h"
 #include "pxa2xx-pcm.h"
diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index b45a4f1..d94a495 100644
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -26,10 +26,10 @@
 
 #include <asm/irq.h>
 #include <linux/mutex.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/audio.h>
 
 #include "pxa2xx-pcm.h"
 #include "pxa2xx-ac97.h"
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index f69870f..8548818 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -21,10 +21,10 @@
 #include <sound/initval.h>
 #include <sound/soc.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/audio.h>
 
 #include "pxa2xx-pcm.h"
 #include "pxa2xx-i2s.h"
diff --git a/sound/soc/pxa/pxa2xx-pcm.c b/sound/soc/pxa/pxa2xx-pcm.c
index 77708f8..4345f38 100644
--- a/sound/soc/pxa/pxa2xx-pcm.c
+++ b/sound/soc/pxa/pxa2xx-pcm.c
@@ -22,9 +22,9 @@
 #include <sound/soc.h>
 
 #include <asm/dma.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
 
 #include "pxa2xx-pcm.h"
 
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index 6438579..eefc25b 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -26,10 +26,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/hardware/scoop.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/akita.h>
-#include <asm/arch/spitz.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/akita.h>
+#include <mach/spitz.h>
 #include "../codecs/wm8750.h"
 #include "pxa2xx-pcm.h"
 #include "pxa2xx-i2s.h"
diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c
index 22971a0..2baaa75 100644
--- a/sound/soc/pxa/tosa.c
+++ b/sound/soc/pxa/tosa.c
@@ -29,10 +29,10 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/tosa.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/audio.h>
+#include <mach/tosa.h>
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
 
 #include "../codecs/wm9712.h"
 #include "pxa2xx-pcm.h"
diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c
index 47bf9a0..8089f8e 100644
--- a/sound/soc/s3c24xx/neo1973_wm8753.c
+++ b/sound/soc/s3c24xx/neo1973_wm8753.c
@@ -25,12 +25,12 @@
 #include <sound/tlv.h>
 
 #include <asm/hardware/scoop.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/audio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
 #include <linux/io.h>
-#include <asm/arch/spi-gpio.h>
+#include <mach/spi-gpio.h>
 
 #include <asm/plat-s3c24xx/regs-iis.h>
 
diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c
index 59c3d53..ded7d995 100644
--- a/sound/soc/s3c24xx/s3c2412-i2s.c
+++ b/sound/soc/s3c24xx/s3c2412-i2s.c
@@ -28,16 +28,16 @@
 #include <sound/pcm_params.h>
 #include <sound/initval.h>
 #include <sound/soc.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #include <linux/io.h>
 #include <asm/dma.h>
 
 #include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/dma.h>
+#include <mach/regs-gpio.h>
+#include <mach/audio.h>
+#include <mach/dma.h>
 
 #include "s3c24xx-pcm.h"
 #include "s3c2412-i2s.h"
diff --git a/sound/soc/s3c24xx/s3c2443-ac97.c b/sound/soc/s3c24xx/s3c2443-ac97.c
index a371673..19c5c3c 100644
--- a/sound/soc/s3c24xx/s3c2443-ac97.c
+++ b/sound/soc/s3c24xx/s3c2443-ac97.c
@@ -27,13 +27,13 @@
 #include <sound/initval.h>
 #include <sound/soc.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/audio.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/audio.h>
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 #include "s3c24xx-pcm.h"
 #include "s3c24xx-ac97.h"
diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c
index ff614d6..ba4476b 100644
--- a/sound/soc/s3c24xx/s3c24xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c24xx-i2s.c
@@ -27,12 +27,12 @@
 #include <sound/initval.h>
 #include <sound/soc.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/audio.h>
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 #include <asm/plat-s3c24xx/regs-iis.h>
 
diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c
index fadd33e..e13e614 100644
--- a/sound/soc/s3c24xx/s3c24xx-pcm.c
+++ b/sound/soc/s3c24xx/s3c24xx-pcm.c
@@ -27,9 +27,9 @@
 #include <sound/soc.h>
 
 #include <asm/dma.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/audio.h>
+#include <mach/hardware.h>
+#include <mach/dma.h>
+#include <mach/audio.h>
 
 #include "s3c24xx-pcm.h"