diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index fc8e7c7..e8fb246 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -271,8 +271,6 @@
 	- directory with information on the NetLabel subsystem.
 networking/
 	- directory with info on various aspects of networking with Linux.
-nfsroot.txt
-	- short guide on setting up a diskless box with NFS root filesystem.
 nmi_watchdog.txt
 	- info on NMI watchdog for SMP systems.
 nommu-mmap.txt
@@ -321,8 +319,6 @@
 	- a description of what robust futexes are.
 rocket.txt
 	- info on the Comtrol RocketPort multiport serial driver.
-rpc-cache.txt
-	- introduction to the caching mechanisms in the sunrpc layer.
 rt-mutex-design.txt
 	- description of the RealTime mutex implementation design.
 rt-mutex.txt
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 08a1ed1..1fc4e714 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -328,7 +328,7 @@
 point out some special detail about the sign-off. 
 
 
-13) When to use Acked-by:
+13) When to use Acked-by: and Cc:
 
 The Signed-off-by: tag indicates that the signer was involved in the
 development of the patch, or that he/she was in the patch's delivery path.
@@ -349,11 +349,59 @@
 For example, if a patch affects multiple subsystems and has an Acked-by: from
 one subsystem maintainer then this usually indicates acknowledgement of just
 the part which affects that maintainer's code.  Judgement should be used here.
- When in doubt people should refer to the original discussion in the mailing
+When in doubt people should refer to the original discussion in the mailing
 list archives.
 
+If a person has had the opportunity to comment on a patch, but has not
+provided such comments, you may optionally add a "Cc:" tag to the patch.
+This is the only tag which might be added without an explicit action by the
+person it names.  This tag documents that potentially interested parties
+have been included in the discussion
 
-14) The canonical patch format
+
+14) Using Test-by: and Reviewed-by:
+
+A Tested-by: tag indicates that the patch has been successfully tested (in
+some environment) by the person named.  This tag informs maintainers that
+some testing has been performed, provides a means to locate testers for
+future patches, and ensures credit for the testers.
+
+Reviewed-by:, instead, indicates that the patch has been reviewed and found
+acceptable according to the Reviewer's Statement:
+
+	Reviewer's statement of oversight
+
+	By offering my Reviewed-by: tag, I state that:
+
+ 	 (a) I have carried out a technical review of this patch to
+	     evaluate its appropriateness and readiness for inclusion into
+	     the mainline kernel.
+
+	 (b) Any problems, concerns, or questions relating to the patch
+	     have been communicated back to the submitter.  I am satisfied
+	     with the submitter's response to my comments.
+
+	 (c) While there may be things that could be improved with this
+	     submission, I believe that it is, at this time, (1) a
+	     worthwhile modification to the kernel, and (2) free of known
+	     issues which would argue against its inclusion.
+
+	 (d) While I have reviewed the patch and believe it to be sound, I
+	     do not (unless explicitly stated elsewhere) make any
+	     warranties or guarantees that it will achieve its stated
+	     purpose or function properly in any given situation.
+
+A Reviewed-by tag is a statement of opinion that the patch is an
+appropriate modification of the kernel without any remaining serious
+technical issues.  Any interested reviewer (who has done the work) can
+offer a Reviewed-by tag for a patch.  This tag serves to give credit to
+reviewers and to inform maintainers of the degree of review which has been
+done on the patch.  Reviewed-by: tags, when supplied by reviewers known to
+understand the subject area and to perform thorough reviews, will normally
+increase the liklihood of your patch getting into the kernel.
+
+
+15) The canonical patch format
 
 The canonical patch subject line is:
 
@@ -512,7 +560,7 @@
 limitations, and under gcc they are as cheap as macros.
 
 Macros should only be used for cases where a static inline is clearly
-suboptimal [there a few, isolated cases of this in fast paths],
+suboptimal [there are a few, isolated cases of this in fast paths],
 or where it is impossible to use a static inline function [such as
 string-izing].
 
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index e68021c..52cd611 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -66,6 +66,8 @@
 	- info on the Linux implementation of Sys V mandatory file locking.
 ncpfs.txt
 	- info on Novell Netware(tm) filesystem using NCP protocol.
+nfsroot.txt
+	- short guide on setting up a diskless box with NFS root filesystem.
 ntfs.txt
 	- info and mount options for the NTFS filesystem (Windows NT).
 ocfs2.txt
@@ -82,6 +84,10 @@
 	- info on relay, for efficient streaming from kernel to user space.
 romfs.txt
 	- description of the ROMFS filesystem.
+rpc-cache.txt
+	- introduction to the caching mechanisms in the sunrpc layer.
+seq_file.txt
+	- how to use the seq_file API
 sharedsubtree.txt
 	- a description of shared subtrees for namespaces.
 smbfs.txt
diff --git a/Documentation/nfsroot.txt b/Documentation/filesystems/nfsroot.txt
similarity index 100%
rename from Documentation/nfsroot.txt
rename to Documentation/filesystems/nfsroot.txt
diff --git a/Documentation/rpc-cache.txt b/Documentation/filesystems/rpc-cache.txt
similarity index 100%
rename from Documentation/rpc-cache.txt
rename to Documentation/filesystems/rpc-cache.txt
diff --git a/Documentation/filesystems/seq_file.txt b/Documentation/filesystems/seq_file.txt
new file mode 100644
index 0000000..cc6cdb9
--- /dev/null
+++ b/Documentation/filesystems/seq_file.txt
@@ -0,0 +1,283 @@
+The seq_file interface
+
+	Copyright 2003 Jonathan Corbet <corbet@lwn.net>
+	This file is originally from the LWN.net Driver Porting series at
+	http://lwn.net/Articles/driver-porting/
+
+
+There are numerous ways for a device driver (or other kernel component) to
+provide information to the user or system administrator.  One useful
+technique is the creation of virtual files, in debugfs, /proc or elsewhere.
+Virtual files can provide human-readable output that is easy to get at
+without any special utility programs; they can also make life easier for
+script writers. It is not surprising that the use of virtual files has
+grown over the years.
+
+Creating those files correctly has always been a bit of a challenge,
+however. It is not that hard to make a virtual file which returns a
+string. But life gets trickier if the output is long - anything greater
+than an application is likely to read in a single operation.  Handling
+multiple reads (and seeks) requires careful attention to the reader's
+position within the virtual file - that position is, likely as not, in the
+middle of a line of output. The kernel has traditionally had a number of
+implementations that got this wrong.
+
+The 2.6 kernel contains a set of functions (implemented by Alexander Viro)
+which are designed to make it easy for virtual file creators to get it
+right.
+
+The seq_file interface is available via <linux/seq_file.h>. There are
+three aspects to seq_file:
+
+     * An iterator interface which lets a virtual file implementation
+       step through the objects it is presenting.
+
+     * Some utility functions for formatting objects for output without
+       needing to worry about things like output buffers.
+
+     * A set of canned file_operations which implement most operations on
+       the virtual file.
+
+We'll look at the seq_file interface via an extremely simple example: a
+loadable module which creates a file called /proc/sequence. The file, when
+read, simply produces a set of increasing integer values, one per line. The
+sequence will continue until the user loses patience and finds something
+better to do. The file is seekable, in that one can do something like the
+following:
+
+    dd if=/proc/sequence of=out1 count=1
+    dd if=/proc/sequence skip=1 out=out2 count=1
+
+Then concatenate the output files out1 and out2 and get the right
+result. Yes, it is a thoroughly useless module, but the point is to show
+how the mechanism works without getting lost in other details.  (Those
+wanting to see the full source for this module can find it at
+http://lwn.net/Articles/22359/).
+
+
+The iterator interface
+
+Modules implementing a virtual file with seq_file must implement a simple
+iterator object that allows stepping through the data of interest.
+Iterators must be able to move to a specific position - like the file they
+implement - but the interpretation of that position is up to the iterator
+itself. A seq_file implementation that is formatting firewall rules, for
+example, could interpret position N as the Nth rule in the chain.
+Positioning can thus be done in whatever way makes the most sense for the
+generator of the data, which need not be aware of how a position translates
+to an offset in the virtual file. The one obvious exception is that a
+position of zero should indicate the beginning of the file.
+
+The /proc/sequence iterator just uses the count of the next number it
+will output as its position.
+
+Four functions must be implemented to make the iterator work. The first,
+called start() takes a position as an argument and returns an iterator
+which will start reading at that position. For our simple sequence example,
+the start() function looks like:
+
+	static void *ct_seq_start(struct seq_file *s, loff_t *pos)
+	{
+	        loff_t *spos = kmalloc(sizeof(loff_t), GFP_KERNEL);
+	        if (! spos)
+	                return NULL;
+	        *spos = *pos;
+	        return spos;
+	}
+
+The entire data structure for this iterator is a single loff_t value
+holding the current position. There is no upper bound for the sequence
+iterator, but that will not be the case for most other seq_file
+implementations; in most cases the start() function should check for a
+"past end of file" condition and return NULL if need be.
+
+For more complicated applications, the private field of the seq_file
+structure can be used. There is also a special value whch can be returned
+by the start() function called SEQ_START_TOKEN; it can be used if you wish
+to instruct your show() function (described below) to print a header at the
+top of the output. SEQ_START_TOKEN should only be used if the offset is
+zero, however.
+
+The next function to implement is called, amazingly, next(); its job is to
+move the iterator forward to the next position in the sequence.  The
+example module can simply increment the position by one; more useful
+modules will do what is needed to step through some data structure. The
+next() function returns a new iterator, or NULL if the sequence is
+complete. Here's the example version:
+
+	static void *ct_seq_next(struct seq_file *s, void *v, loff_t *pos)
+	{
+	        loff_t *spos = v;
+	        *pos = ++*spos;
+	        return spos;
+	}
+
+The stop() function is called when iteration is complete; its job, of
+course, is to clean up. If dynamic memory is allocated for the iterator,
+stop() is the place to free it.
+
+	static void ct_seq_stop(struct seq_file *s, void *v)
+	{
+	        kfree(v);
+	}
+
+Finally, the show() function should format the object currently pointed to
+by the iterator for output. It should return zero, or an error code if
+something goes wrong. The example module's show() function is:
+
+	static int ct_seq_show(struct seq_file *s, void *v)
+	{
+	        loff_t *spos = v;
+	        seq_printf(s, "%lld\n", (long long)*spos);
+	        return 0;
+	}
+
+We will look at seq_printf() in a moment. But first, the definition of the
+seq_file iterator is finished by creating a seq_operations structure with
+the four functions we have just defined:
+
+	static const struct seq_operations ct_seq_ops = {
+	        .start = ct_seq_start,
+	        .next  = ct_seq_next,
+	        .stop  = ct_seq_stop,
+	        .show  = ct_seq_show
+	};
+
+This structure will be needed to tie our iterator to the /proc file in
+a little bit.
+
+It's worth noting that the interator value returned by start() and
+manipulated by the other functions is considered to be completely opaque by
+the seq_file code. It can thus be anything that is useful in stepping
+through the data to be output. Counters can be useful, but it could also be
+a direct pointer into an array or linked list. Anything goes, as long as
+the programmer is aware that things can happen between calls to the
+iterator function. However, the seq_file code (by design) will not sleep
+between the calls to start() and stop(), so holding a lock during that time
+is a reasonable thing to do. The seq_file code will also avoid taking any
+other locks while the iterator is active.
+
+
+Formatted output
+
+The seq_file code manages positioning within the output created by the
+iterator and getting it into the user's buffer. But, for that to work, that
+output must be passed to the seq_file code. Some utility functions have
+been defined which make this task easy.
+
+Most code will simply use seq_printf(), which works pretty much like
+printk(), but which requires the seq_file pointer as an argument. It is
+common to ignore the return value from seq_printf(), but a function
+producing complicated output may want to check that value and quit if
+something non-zero is returned; an error return means that the seq_file
+buffer has been filled and further output will be discarded.
+
+For straight character output, the following functions may be used:
+
+	int seq_putc(struct seq_file *m, char c);
+	int seq_puts(struct seq_file *m, const char *s);
+	int seq_escape(struct seq_file *m, const char *s, const char *esc);
+
+The first two output a single character and a string, just like one would
+expect. seq_escape() is like seq_puts(), except that any character in s
+which is in the string esc will be represented in octal form in the output.
+
+There is also a function for printing filenames:
+
+	int seq_path(struct seq_file *m, struct path *path, char *esc);
+
+Here, path indicates the file of interest, and esc is a set of characters
+which should be escaped in the output.
+
+
+Making it all work
+
+So far, we have a nice set of functions which can produce output within the
+seq_file system, but we have not yet turned them into a file that a user
+can see. Creating a file within the kernel requires, of course, the
+creation of a set of file_operations which implement the operations on that
+file. The seq_file interface provides a set of canned operations which do
+most of the work. The virtual file author still must implement the open()
+method, however, to hook everything up. The open function is often a single
+line, as in the example module:
+
+	static int ct_open(struct inode *inode, struct file *file)
+	{
+		return seq_open(file, &ct_seq_ops);
+	}
+
+Here, the call to seq_open() takes the seq_operations structure we created
+before, and gets set up to iterate through the virtual file.
+
+On a successful open, seq_open() stores the struct seq_file pointer in
+file->private_data. If you have an application where the same iterator can
+be used for more than one file, you can store an arbitrary pointer in the
+private field of the seq_file structure; that value can then be retrieved
+by the iterator functions.
+
+The other operations of interest - read(), llseek(), and release() - are
+all implemented by the seq_file code itself. So a virtual file's
+file_operations structure will look like:
+
+	static const struct file_operations ct_file_ops = {
+	        .owner   = THIS_MODULE,
+	        .open    = ct_open,
+	        .read    = seq_read,
+	        .llseek  = seq_lseek,
+	        .release = seq_release
+	};
+
+There is also a seq_release_private() which passes the contents of the
+seq_file private field to kfree() before releasing the structure.
+
+The final step is the creation of the /proc file itself. In the example
+code, that is done in the initialization code in the usual way:
+
+	static int ct_init(void)
+	{
+	        struct proc_dir_entry *entry;
+
+	        entry = create_proc_entry("sequence", 0, NULL);
+	        if (entry)
+	                entry->proc_fops = &ct_file_ops;
+	        return 0;
+	}
+
+	module_init(ct_init);
+
+And that is pretty much it.
+
+
+seq_list
+
+If your file will be iterating through a linked list, you may find these
+routines useful:
+
+	struct list_head *seq_list_start(struct list_head *head,
+	       		 		 loff_t pos);
+	struct list_head *seq_list_start_head(struct list_head *head,
+			 		      loff_t pos);
+	struct list_head *seq_list_next(void *v, struct list_head *head,
+					loff_t *ppos);
+
+These helpers will interpret pos as a position within the list and iterate
+accordingly.  Your start() and next() functions need only invoke the
+seq_list_* helpers with a pointer to the appropriate list_head structure.  
+
+
+The extra-simple version
+
+For extremely simple virtual files, there is an even easier interface.  A
+module can define only the show() function, which should create all the
+output that the virtual file will contain. The file's open() method then
+calls:
+
+	int single_open(struct file *file,
+	                int (*show)(struct seq_file *m, void *p),
+	                void *data);
+
+When output time comes, the show() function will be called once. The data
+value given to single_open() can be found in the private field of the
+seq_file structure. When using single_open(), the programmer should use
+single_release() instead of seq_release() in the file_operations structure
+to avoid a memory leak.
diff --git a/Documentation/hrtimers/highres.txt b/Documentation/hrtimers/highres.txt
index ce0e9a9..a73ecf5 100644
--- a/Documentation/hrtimers/highres.txt
+++ b/Documentation/hrtimers/highres.txt
@@ -98,7 +98,7 @@
 event devices are used to provide local CPU functionality such as process
 accounting, profiling, and high resolution timers.
 
-The management layer assignes one or more of the folliwing functions to a clock
+The management layer assigns one or more of the following functions to a clock
 event device:
       - system global periodic tick (jiffies update)
       - cpu local update_process_times
diff --git a/Documentation/i386/IO-APIC.txt b/Documentation/i386/IO-APIC.txt
index f951666..30b4c71 100644
--- a/Documentation/i386/IO-APIC.txt
+++ b/Documentation/i386/IO-APIC.txt
@@ -70,7 +70,7 @@
 
 These INTA-D PCI IRQs are always 'local to the card', their real meaning
 depends on which slot they are in. If you look at the daisy chaining diagram,
-a card in slot4, issuing INTA IRQ, it will end up as a signal on PIRQ2 of
+a card in slot4, issuing INTA IRQ, it will end up as a signal on PIRQ4 of
 the PCI chipset. Most cards issue INTA, this creates optimal distribution
 between the PIRQ lines. (distributing IRQ sources properly is not a
 necessity, PCI IRQs can be shared at will, but it's a good for performance
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 508e2a2..dafd001 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -170,11 +170,6 @@
 	acpi_irq_isa=	[HW,ACPI] If irq_balance, mark listed IRQs used by ISA
 			Format: <irq>,<irq>...
 
-	acpi_new_pts_ordering [HW,ACPI]
-			Enforce the ACPI 2.0 ordering of the _PTS control
-			method wrt putting devices into low power states
-			default: pre ACPI 2.0 ordering of _PTS
-
 	acpi_no_auto_ssdt	[HW,ACPI] Disable automatic loading of SSDT
 
 	acpi_os_name=	[HW,ACPI] Tell ACPI BIOS the name of the OS
@@ -380,6 +375,10 @@
 	ccw_timeout_log [S390]
 			See Documentation/s390/CommonIO for details.
 
+	cgroup_disable= [KNL] Disable a particular controller
+			Format: {name of the controller(s) to disable}
+				{Currently supported controllers - "memory"}
+
 	checkreqprot	[SELINUX] Set initial checkreqprot flag value.
 			Format: { "0" | "1" }
 			See security/selinux/Kconfig help text.
@@ -845,7 +844,7 @@
 			arch/alpha/kernel/core_marvel.c.
 
 	ip=		[IP_PNP]
-			See Documentation/nfsroot.txt.
+			See Documentation/filesystems/nfsroot.txt.
 
 	ip2=		[HW] Set IO/IRQ pairs for up to 4 IntelliPort boards
 			See comment before ip2_setup() in
@@ -1199,10 +1198,10 @@
 			file if at all.
 
 	nfsaddrs=	[NFS]
-			See Documentation/nfsroot.txt.
+			See Documentation/filesystems/nfsroot.txt.
 
 	nfsroot=	[NFS] nfs root filesystem for disk-less boxes.
-			See Documentation/nfsroot.txt.
+			See Documentation/filesystems/nfsroot.txt.
 
 	nfs.callback_tcpport=
 			[NFS] set the TCP port on which the NFSv4 callback
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index bec5a32e..4c1fc65 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -1,7 +1,7 @@
 /*P:100 This is the Launcher code, a simple program which lays out the
- * "physical" memory for the new Guest by mapping the kernel image and the
- * virtual devices, then reads repeatedly from /dev/lguest to run the Guest.
-:*/
+ * "physical" memory for the new Guest by mapping the kernel image and
+ * the virtual devices, then opens /dev/lguest to tell the kernel
+ * about the Guest and control it. :*/
 #define _LARGEFILE64_SOURCE
 #define _GNU_SOURCE
 #include <stdio.h>
@@ -43,7 +43,7 @@
 #include "linux/virtio_console.h"
 #include "linux/virtio_ring.h"
 #include "asm-x86/bootparam.h"
-/*L:110 We can ignore the 38 include files we need for this program, but I do
+/*L:110 We can ignore the 39 include files we need for this program, but I do
  * want to draw attention to the use of kernel-style types.
  *
  * As Linus said, "C is a Spartan language, and so should your naming be."  I
@@ -320,7 +320,7 @@
 		err(1, "Reading program headers");
 
 	/* Try all the headers: there are usually only three.  A read-only one,
-	 * a read-write one, and a "note" section which isn't loadable. */
+	 * a read-write one, and a "note" section which we don't load. */
 	for (i = 0; i < ehdr->e_phnum; i++) {
 		/* If this isn't a loadable segment, we ignore it */
 		if (phdr[i].p_type != PT_LOAD)
@@ -387,7 +387,7 @@
 	if (memcmp(hdr.e_ident, ELFMAG, SELFMAG) == 0)
 		return map_elf(fd, &hdr);
 
-	/* Otherwise we assume it's a bzImage, and try to unpack it */
+	/* Otherwise we assume it's a bzImage, and try to load it. */
 	return load_bzimage(fd);
 }
 
@@ -433,12 +433,12 @@
 	return len;
 }
 
-/* Once we know how much memory we have, we can construct simple linear page
+/* Once we know how much memory we have we can construct simple linear page
  * tables which set virtual == physical which will get the Guest far enough
  * into the boot to create its own.
  *
  * We lay them out of the way, just below the initrd (which is why we need to
- * know its size). */
+ * know its size here). */
 static unsigned long setup_pagetables(unsigned long mem,
 				      unsigned long initrd_size)
 {
@@ -850,7 +850,8 @@
  *
  * Handling output for network is also simple: we get all the output buffers
  * and write them (ignoring the first element) to this device's file descriptor
- * (stdout). */
+ * (/dev/net/tun).
+ */
 static void handle_net_output(int fd, struct virtqueue *vq)
 {
 	unsigned int head, out, in;
@@ -924,7 +925,7 @@
 	write(waker_fd, &vq->dev->fd, sizeof(vq->dev->fd));
 }
 
-/* Resetting a device is fairly easy. */
+/* When the Guest asks us to reset a device, it's is fairly easy. */
 static void reset_device(struct device *dev)
 {
 	struct virtqueue *vq;
@@ -1003,8 +1004,8 @@
 		if (select(devices.max_infd+1, &fds, NULL, NULL, &poll) == 0)
 			break;
 
-		/* Otherwise, call the device(s) which have readable
-		 * file descriptors and a method of handling them.  */
+		/* Otherwise, call the device(s) which have readable file
+		 * descriptors and a method of handling them.  */
 		for (i = devices.dev; i; i = i->next) {
 			if (i->handle_input && FD_ISSET(i->fd, &fds)) {
 				int dev_fd;
@@ -1015,8 +1016,7 @@
 				 * should no longer service it.  Networking and
 				 * console do this when there's no input
 				 * buffers to deliver into.  Console also uses
-				 * it when it discovers that stdin is
-				 * closed. */
+				 * it when it discovers that stdin is closed. */
 				FD_CLR(i->fd, &devices.infds);
 				/* Tell waker to ignore it too, by sending a
 				 * negative fd number (-1, since 0 is a valid
@@ -1033,7 +1033,8 @@
  *
  * All devices need a descriptor so the Guest knows it exists, and a "struct
  * device" so the Launcher can keep track of it.  We have common helper
- * routines to allocate and manage them. */
+ * routines to allocate and manage them.
+ */
 
 /* The layout of the device page is a "struct lguest_device_desc" followed by a
  * number of virtqueue descriptors, then two sets of feature bits, then an
@@ -1078,7 +1079,7 @@
 	struct virtqueue **i, *vq = malloc(sizeof(*vq));
 	void *p;
 
-	/* First we need some pages for this virtqueue. */
+	/* First we need some memory for this virtqueue. */
 	pages = (vring_size(num_descs, getpagesize()) + getpagesize() - 1)
 		/ getpagesize();
 	p = get_pages(pages);
@@ -1122,7 +1123,7 @@
 }
 
 /* The first half of the feature bitmask is for us to advertise features.  The
- * second half if for the Guest to accept features. */
+ * second half is for the Guest to accept features. */
 static void add_feature(struct device *dev, unsigned bit)
 {
 	u8 *features = get_feature_bits(dev);
@@ -1151,7 +1152,9 @@
 }
 
 /* This routine does all the creation and setup of a new device, including
- * calling new_dev_desc() to allocate the descriptor and device memory. */
+ * calling new_dev_desc() to allocate the descriptor and device memory.
+ *
+ * See what I mean about userspace being boring? */
 static struct device *new_device(const char *name, u16 type, int fd,
 				 bool (*handle_input)(int, struct device *))
 {
@@ -1383,7 +1386,6 @@
 	 * Launcher triggers interrupt to Guest. */
 	int done_fd;
 };
-/*:*/
 
 /*L:210
  * The Disk
@@ -1493,7 +1495,10 @@
 	while (read(vblk->workpipe[0], &c, 1) == 1) {
 		/* We acknowledge each request immediately to reduce latency,
 		 * rather than waiting until we've done them all.  I haven't
-		 * measured to see if it makes any difference. */
+		 * measured to see if it makes any difference.
+		 *
+		 * That would be an interesting test, wouldn't it?  You could
+		 * also try having more than one I/O thread. */
 		while (service_io(dev))
 			write(vblk->done_fd, &c, 1);
 	}
@@ -1501,7 +1506,7 @@
 }
 
 /* Now we've seen the I/O thread, we return to the Launcher to see what happens
- * when the thread tells us it's completed some I/O. */
+ * when that thread tells us it's completed some I/O. */
 static bool handle_io_finish(int fd, struct device *dev)
 {
 	char c;
@@ -1573,11 +1578,12 @@
 	 * more work. */
 	pipe(vblk->workpipe);
 
-	/* Create stack for thread and run it */
+	/* Create stack for thread and run it.  Since stack grows upwards, we
+	 * point the stack pointer to the end of this region. */
 	stack = malloc(32768);
 	/* SIGCHLD - We dont "wait" for our cloned thread, so prevent it from
 	 * becoming a zombie. */
-	if (clone(io_thread, stack + 32768,  CLONE_VM | SIGCHLD, dev) == -1)
+	if (clone(io_thread, stack + 32768, CLONE_VM | SIGCHLD, dev) == -1)
 		err(1, "Creating clone");
 
 	/* We don't need to keep the I/O thread's end of the pipes open. */
@@ -1587,14 +1593,14 @@
 	verbose("device %u: virtblock %llu sectors\n",
 		devices.device_num, le64_to_cpu(conf.capacity));
 }
-/* That's the end of device setup. :*/
+/* That's the end of device setup. */
 
-/* Reboot */
+/*L:230 Reboot is pretty easy: clean up and exec() the Launcher afresh. */
 static void __attribute__((noreturn)) restart_guest(void)
 {
 	unsigned int i;
 
-	/* Closing pipes causes the waker thread and io_threads to die, and
+	/* Closing pipes causes the Waker thread and io_threads to die, and
 	 * closing /dev/lguest cleans up the Guest.  Since we don't track all
 	 * open fds, we simply close everything beyond stderr. */
 	for (i = 3; i < FD_SETSIZE; i++)
@@ -1603,7 +1609,7 @@
 	err(1, "Could not exec %s", main_args[0]);
 }
 
-/*L:220 Finally we reach the core of the Launcher, which runs the Guest, serves
+/*L:220 Finally we reach the core of the Launcher which runs the Guest, serves
  * its input and output, and finally, lays it to rest. */
 static void __attribute__((noreturn)) run_guest(int lguest_fd)
 {
@@ -1644,7 +1650,7 @@
 			err(1, "Resetting break");
 	}
 }
-/*
+/*L:240
  * This is the end of the Launcher.  The good news: we are over halfway
  * through!  The bad news: the most fiendish part of the code still lies ahead
  * of us.
@@ -1691,8 +1697,8 @@
 	 * device receive input from a file descriptor, we keep an fdset
 	 * (infds) and the maximum fd number (max_infd) with the head of the
 	 * list.  We also keep a pointer to the last device.  Finally, we keep
-	 * the next interrupt number to hand out (1: remember that 0 is used by
-	 * the timer). */
+	 * the next interrupt number to use for devices (1: remember that 0 is
+	 * used by the timer). */
 	FD_ZERO(&devices.infds);
 	devices.max_infd = -1;
 	devices.lastdev = NULL;
@@ -1793,8 +1799,8 @@
 	lguest_fd = tell_kernel(pgdir, start);
 
 	/* We fork off a child process, which wakes the Launcher whenever one
-	 * of the input file descriptors needs attention.  Otherwise we would
-	 * run the Guest until it tries to output something. */
+	 * of the input file descriptors needs attention.  We call this the
+	 * Waker, and we'll cover it in a moment. */
 	waker_fd = setup_waker(lguest_fd);
 
 	/* Finally, run the Guest.  This doesn't return. */
diff --git a/Documentation/lguest/lguest.txt b/Documentation/lguest/lguest.txt
index 722d4e7..29510dc 100644
--- a/Documentation/lguest/lguest.txt
+++ b/Documentation/lguest/lguest.txt
@@ -1,6 +1,7 @@
-Rusty's Remarkably Unreliable Guide to Lguest
-	- or, A Young Coder's Illustrated Hypervisor
-http://lguest.ozlabs.org
+      __
+ (___()'`;  Rusty's Remarkably Unreliable Guide to Lguest
+ /,    /`      - or, A Young Coder's Illustrated Hypervisor
+ \\"--\\    http://lguest.ozlabs.org
 
 Lguest is designed to be a minimal hypervisor for the Linux kernel, for
 Linux developers and users to experiment with virtualization with the
@@ -41,12 +42,16 @@
          CONFIG_PHYSICAL_ALIGN=0x100000)
 
   "Device Drivers":
+     "Block devices"
+        "Virtio block driver (EXPERIMENTAL)" = M/Y
      "Network device support"
         "Universal TUN/TAP device driver support" = M/Y
-           (CONFIG_TUN=m)
-     "Virtualization"
-        "Linux hypervisor example code" = M/Y
-           (CONFIG_LGUEST=m)
+        "Virtio network driver (EXPERIMENTAL)" = M/Y
+           (CONFIG_VIRTIO_BLK=m, CONFIG_VIRTIO_NET=m and CONFIG_TUN=m)
+
+  "Virtualization"
+     "Linux hypervisor example code" = M/Y
+        (CONFIG_LGUEST=m)
 
 - A tool called "lguest" is available in this directory: type "make"
   to build it.  If you didn't build your kernel in-tree, use "make
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index 02e56d4..c485ee0 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -84,9 +84,6 @@
 	- IP policy-based routing
 ray_cs.txt
 	- Raylink Wireless LAN card driver info.
-sk98lin.txt
-	- Marvell Yukon Chipset / SysKonnect SK-98xx compliant Gigabit
-	  Ethernet Adapter family driver info
 skfp.txt
 	- SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
 smc9.txt
diff --git a/Documentation/networking/sk98lin.txt b/Documentation/networking/sk98lin.txt
deleted file mode 100644
index 8590a95..0000000
--- a/Documentation/networking/sk98lin.txt
+++ /dev/null
@@ -1,568 +0,0 @@
-(C)Copyright 1999-2004 Marvell(R).
-All rights reserved
-===========================================================================
-
-sk98lin.txt created 13-Feb-2004
-
-Readme File for sk98lin v6.23
-Marvell Yukon/SysKonnect SK-98xx Gigabit Ethernet Adapter family driver for LINUX
-
-This file contains
- 1  Overview
- 2  Required Files
- 3  Installation
-    3.1  Driver Installation
-    3.2  Inclusion of adapter at system start
- 4  Driver Parameters
-    4.1  Per-Port Parameters
-    4.2  Adapter Parameters
- 5  Large Frame Support
- 6  VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad)
- 7  Troubleshooting
-
-===========================================================================
-
-
-1  Overview
-===========
-
-The sk98lin driver supports the Marvell Yukon and SysKonnect 
-SK-98xx/SK-95xx compliant Gigabit Ethernet Adapter on Linux. It has 
-been tested with Linux on Intel/x86 machines.
-***
-
-
-2  Required Files
-=================
-
-The linux kernel source.
-No additional files required.
-***
-
-
-3  Installation
-===============
-
-It is recommended to download the latest version of the driver from the 
-SysKonnect web site www.syskonnect.com. If you have downloaded the latest
-driver, the Linux kernel has to be patched before the driver can be 
-installed. For details on how to patch a Linux kernel, refer to the 
-patch.txt file.
-
-3.1  Driver Installation
-------------------------
-
-The following steps describe the actions that are required to install
-the driver and to start it manually. These steps should be carried
-out for the initial driver setup. Once confirmed to be ok, they can
-be included in the system start.
-
-NOTE 1: To perform the following tasks you need 'root' access.
-
-NOTE 2: In case of problems, please read the section "Troubleshooting" 
-        below.
-
-The driver can either be integrated into the kernel or it can be compiled 
-as a module. Select the appropriate option during the kernel 
-configuration.
-
-Compile/use the driver as a module
-----------------------------------
-To compile the driver, go to the directory /usr/src/linux and
-execute the command "make menuconfig" or "make xconfig" and proceed as 
-follows:
-
-To integrate the driver permanently into the kernel, proceed as follows:
-
-1. Select the menu "Network device support" and then "Ethernet(1000Mbit)"
-2. Mark "Marvell Yukon Chipset / SysKonnect SK-98xx family support" 
-   with (*) 
-3. Build a new kernel when the configuration of the above options is 
-   finished.
-4. Install the new kernel.
-5. Reboot your system.
-
-To use the driver as a module, proceed as follows:
-
-1. Enable 'loadable module support' in the kernel.
-2. For automatic driver start, enable the 'Kernel module loader'.
-3. Select the menu "Network device support" and then "Ethernet(1000Mbit)"
-4. Mark "Marvell Yukon Chipset / SysKonnect SK-98xx family support" 
-   with (M)
-5. Execute the command "make modules".
-6. Execute the command "make modules_install".
-   The appropriate modules will be installed.
-7. Reboot your system.
-
-
-Load the module manually
-------------------------
-To load the module manually, proceed as follows:
-
-1. Enter "modprobe sk98lin".
-2. If a Marvell Yukon or SysKonnect SK-98xx adapter is installed in 
-   your computer and you have a /proc file system, execute the command:
-   "ls /proc/net/sk98lin/" 
-   This should produce an output containing a line with the following 
-   format:
-   eth0   eth1  ...
-   which indicates that your adapter has been found and initialized.
-   
-   NOTE 1: If you have more than one Marvell Yukon or SysKonnect SK-98xx 
-           adapter installed, the adapters will be listed as 'eth0', 
-                   'eth1', 'eth2', etc.
-                   For each adapter, repeat steps 3 and 4 below.
-
-   NOTE 2: If you have other Ethernet adapters installed, your Marvell
-           Yukon or SysKonnect SK-98xx adapter will be mapped to the 
-                   next available number, e.g. 'eth1'. The mapping is executed 
-                   automatically.
-           The module installation message (displayed either in a system
-           log file or on the console) prints a line for each adapter 
-           found containing the corresponding 'ethX'.
-
-3. Select an IP address and assign it to the respective adapter by 
-   entering:
-   ifconfig eth0 <ip-address>
-   With this command, the adapter is connected to the Ethernet. 
-   
-   SK-98xx Gigabit Ethernet Server Adapters: The yellow LED on the adapter 
-   is now active, the link status LED of the primary port is active and 
-   the link status LED of the secondary port (on dual port adapters) is 
-   blinking (if the ports are connected to a switch or hub).
-   SK-98xx V2.0 Gigabit Ethernet Adapters: The link status LED is active.
-   In addition, you will receive a status message on the console stating
-   "ethX: network connection up using port Y" and showing the selected 
-   connection parameters (x stands for the ethernet device number 
-   (0,1,2, etc), y stands for the port name (A or B)).
-
-   NOTE: If you are in doubt about IP addresses, ask your network
-         administrator for assistance.
-  
-4. Your adapter should now be fully operational.
-   Use 'ping <otherstation>' to verify the connection to other computers 
-   on your network.
-5. To check the adapter configuration view /proc/net/sk98lin/[devicename].
-   For example by executing:    
-   "cat /proc/net/sk98lin/eth0" 
-
-Unload the module
------------------
-To stop and unload the driver modules, proceed as follows:
-
-1. Execute the command "ifconfig eth0 down".
-2. Execute the command "rmmod sk98lin".
-
-3.2  Inclusion of adapter at system start
------------------------------------------
-
-Since a large number of different Linux distributions are 
-available, we are unable to describe a general installation procedure
-for the driver module.
-Because the driver is now integrated in the kernel, installation should
-be easy, using the standard mechanism of your distribution.
-Refer to the distribution's manual for installation of ethernet adapters.
-
-***
-
-4  Driver Parameters
-====================
-
-Parameters can be set at the command line after the module has been 
-loaded with the command 'modprobe'.
-In some distributions, the configuration tools are able to pass parameters
-to the driver module.
-
-If you use the kernel module loader, you can set driver parameters
-in the file /etc/modprobe.conf (or /etc/modules.conf in 2.4 or earlier).
-To set the driver parameters in this file, proceed as follows:
-
-1. Insert a line of the form :
-   options sk98lin ...
-   For "...", the same syntax is required as described for the command
-   line parameters of modprobe below.
-2. To activate the new parameters, either reboot your computer
-   or 
-   unload and reload the driver.
-   The syntax of the driver parameters is:
-
-        modprobe sk98lin parameter=value1[,value2[,value3...]]
-
-   where value1 refers to the first adapter, value2 to the second etc.
-
-NOTE: All parameters are case sensitive. Write them exactly as shown 
-      below.
-
-Example:
-Suppose you have two adapters. You want to set auto-negotiation
-on the first adapter to ON and on the second adapter to OFF.
-You also want to set DuplexCapabilities on the first adapter
-to FULL, and on the second adapter to HALF.
-Then, you must enter:
-
-        modprobe sk98lin AutoNeg_A=On,Off DupCap_A=Full,Half
-
-NOTE: The number of adapters that can be configured this way is
-      limited in the driver (file skge.c, constant SK_MAX_CARD_PARAM).
-      The current limit is 16. If you happen to install
-      more adapters, adjust this and recompile.
-
-
-4.1  Per-Port Parameters
-------------------------
-
-These settings are available for each port on the adapter.
-In the following description, '?' stands for the port for
-which you set the parameter (A or B).
-
-Speed
------
-Parameter:    Speed_?
-Values:       10, 100, 1000, Auto
-Default:      Auto
-
-This parameter is used to set the speed capabilities. It is only valid 
-for the SK-98xx V2.0 copper adapters.
-Usually, the speed is negotiated between the two ports during link 
-establishment. If this fails, a port can be forced to a specific setting
-with this parameter.
-
-Auto-Negotiation
-----------------
-Parameter:    AutoNeg_?
-Values:       On, Off, Sense
-Default:      On
-  
-The "Sense"-mode automatically detects whether the link partner supports
-auto-negotiation or not.
-
-Duplex Capabilities
--------------------
-Parameter:    DupCap_?
-Values:       Half, Full, Both
-Default:      Both
-
-This parameters is only relevant if auto-negotiation for this port is 
-not set to "Sense". If auto-negotiation is set to "On", all three values
-are possible. If it is set to "Off", only "Full" and "Half" are allowed.
-This parameter is useful if your link partner does not support all
-possible combinations.
-
-Flow Control
-------------
-Parameter:    FlowCtrl_?
-Values:       Sym, SymOrRem, LocSend, None
-Default:      SymOrRem
-
-This parameter can be used to set the flow control capabilities the 
-port reports during auto-negotiation. It can be set for each port 
-individually.
-Possible modes:
-   -- Sym      = Symmetric: both link partners are allowed to send 
-                  PAUSE frames
-   -- SymOrRem = SymmetricOrRemote: both or only remote partner 
-                  are allowed to send PAUSE frames
-   -- LocSend  = LocalSend: only local link partner is allowed 
-                  to send PAUSE frames
-   -- None     = no link partner is allowed to send PAUSE frames
-  
-NOTE: This parameter is ignored if auto-negotiation is set to "Off".
-
-Role in Master-Slave-Negotiation (1000Base-T only)
---------------------------------------------------
-Parameter:    Role_?
-Values:       Auto, Master, Slave
-Default:      Auto
-
-This parameter is only valid for the SK-9821 and SK-9822 adapters.
-For two 1000Base-T ports to communicate, one must take the role of the
-master (providing timing information), while the other must be the 
-slave. Usually, this is negotiated between the two ports during link 
-establishment. If this fails, a port can be forced to a specific setting
-with this parameter.
-
-
-4.2  Adapter Parameters
------------------------
-
-Connection Type (SK-98xx V2.0 copper adapters only)
----------------
-Parameter:    ConType
-Values:       Auto, 100FD, 100HD, 10FD, 10HD
-Default:      Auto
-
-The parameter 'ConType' is a combination of all five per-port parameters
-within one single parameter. This simplifies the configuration of both ports
-of an adapter card! The different values of this variable reflect the most 
-meaningful combinations of port parameters.
-
-The following table shows the values of 'ConType' and the corresponding
-combinations of the per-port parameters:
-
-    ConType   |  DupCap   AutoNeg   FlowCtrl   Role             Speed
-    ----------+------------------------------------------------------
-    Auto      |  Both     On        SymOrRem   Auto             Auto
-    100FD     |  Full     Off       None       Auto (ignored)   100
-    100HD     |  Half     Off       None       Auto (ignored)   100
-    10FD      |  Full     Off       None       Auto (ignored)   10
-    10HD      |  Half     Off       None       Auto (ignored)   10
-
-Stating any other port parameter together with this 'ConType' variable
-will result in a merged configuration of those settings. This due to 
-the fact, that the per-port parameters (e.g. Speed_? ) have a higher
-priority than the combined variable 'ConType'.
-
-NOTE: This parameter is always used on both ports of the adapter card.
-
-Interrupt Moderation
---------------------
-Parameter:    Moderation
-Values:       None, Static, Dynamic
-Default:      None
-
-Interrupt moderation is employed to limit the maximum number of interrupts
-the driver has to serve. That is, one or more interrupts (which indicate any
-transmit or receive packet to be processed) are queued until the driver 
-processes them. When queued interrupts are to be served, is determined by the
-'IntsPerSec' parameter, which is explained later below.
-
-Possible modes:
-
-   -- None - No interrupt moderation is applied on the adapter card. 
-      Therefore, each transmit or receive interrupt is served immediately
-      as soon as it appears on the interrupt line of the adapter card.
-
-   -- Static - Interrupt moderation is applied on the adapter card. 
-      All transmit and receive interrupts are queued until a complete
-      moderation interval ends. If such a moderation interval ends, all
-      queued interrupts are processed in one big bunch without any delay.
-      The term 'static' reflects the fact, that interrupt moderation is
-      always enabled, regardless how much network load is currently 
-      passing via a particular interface. In addition, the duration of
-      the moderation interval has a fixed length that never changes while
-      the driver is operational.
-
-   -- Dynamic - Interrupt moderation might be applied on the adapter card,
-      depending on the load of the system. If the driver detects that the
-      system load is too high, the driver tries to shield the system against 
-      too much network load by enabling interrupt moderation. If - at a later
-      time - the CPU utilization decreases again (or if the network load is 
-      negligible) the interrupt moderation will automatically be disabled.
-
-Interrupt moderation should be used when the driver has to handle one or more
-interfaces with a high network load, which - as a consequence - leads also to a
-high CPU utilization. When moderation is applied in such high network load 
-situations, CPU load might be reduced by 20-30%.
-
-NOTE: The drawback of using interrupt moderation is an increase of the round-
-trip-time (RTT), due to the queueing and serving of interrupts at dedicated
-moderation times.
-
-Interrupts per second
----------------------
-Parameter:    IntsPerSec
-Values:       30...40000 (interrupts per second)
-Default:      2000
-
-This parameter is only used if either static or dynamic interrupt moderation
-is used on a network adapter card. Using this parameter if no moderation is
-applied will lead to no action performed.
-
-This parameter determines the length of any interrupt moderation interval. 
-Assuming that static interrupt moderation is to be used, an 'IntsPerSec' 
-parameter value of 2000 will lead to an interrupt moderation interval of
-500 microseconds. 
-
-NOTE: The duration of the moderation interval is to be chosen with care.
-At first glance, selecting a very long duration (e.g. only 100 interrupts per 
-second) seems to be meaningful, but the increase of packet-processing delay 
-is tremendous. On the other hand, selecting a very short moderation time might
-compensate the use of any moderation being applied.
-
-
-Preferred Port
---------------
-Parameter:    PrefPort
-Values:       A, B
-Default:      A
-
-This is used to force the preferred port to A or B (on dual-port network 
-adapters). The preferred port is the one that is used if both are detected
-as fully functional.
-
-RLMT Mode (Redundant Link Management Technology)
-------------------------------------------------
-Parameter:    RlmtMode
-Values:       CheckLinkState,CheckLocalPort, CheckSeg, DualNet
-Default:      CheckLinkState
-
-RLMT monitors the status of the port. If the link of the active port 
-fails, RLMT switches immediately to the standby link. The virtual link is 
-maintained as long as at least one 'physical' link is up. 
-
-Possible modes:
-
-   -- CheckLinkState - Check link state only: RLMT uses the link state
-      reported by the adapter hardware for each individual port to 
-      determine whether a port can be used for all network traffic or 
-      not.
-
-   -- CheckLocalPort - In this mode, RLMT monitors the network path 
-      between the two ports of an adapter by regularly exchanging packets
-      between them. This mode requires a network configuration in which 
-      the two ports are able to "see" each other (i.e. there must not be 
-      any router between the ports).
-
-   -- CheckSeg - Check local port and segmentation: This mode supports the
-      same functions as the CheckLocalPort mode and additionally checks 
-      network segmentation between the ports. Therefore, this mode is only
-      to be used if Gigabit Ethernet switches are installed on the network
-      that have been configured to use the Spanning Tree protocol. 
-
-   -- DualNet - In this mode, ports A and B are used as separate devices. 
-      If you have a dual port adapter, port A will be configured as eth0 
-      and port B as eth1. Both ports can be used independently with 
-      distinct IP addresses. The preferred port setting is not used. 
-      RLMT is turned off.
-   
-NOTE: RLMT modes CLP and CLPSS are designed to operate in configurations 
-      where a network path between the ports on one adapter exists. 
-      Moreover, they are not designed to work where adapters are connected
-      back-to-back.
-***
-
-
-5  Large Frame Support
-======================
-
-The driver supports large frames (also called jumbo frames). Using large 
-frames can result in an improved throughput if transferring large amounts 
-of data.
-To enable large frames, set the MTU (maximum transfer unit) of the 
-interface to the desired value (up to 9000), execute the following 
-command:
-      ifconfig eth0 mtu 9000
-This will only work if you have two adapters connected back-to-back
-or if you use a switch that supports large frames. When using a switch, 
-it should be configured to allow large frames and auto-negotiation should  
-be set to OFF. The setting must be configured on all adapters that can be 
-reached by the large frames. If one adapter is not set to receive large 
-frames, it will simply drop them.
-
-You can switch back to the standard ethernet frame size by executing the 
-following command:
-      ifconfig eth0 mtu 1500
-
-To permanently configure this setting, add a script with the 'ifconfig' 
-line to the system startup sequence (named something like "S99sk98lin" 
-in /etc/rc.d/rc2.d).
-***
-
-
-6  VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad)
-==================================================================
-
-The Marvell Yukon/SysKonnect Linux drivers are able to support VLAN and 
-Link Aggregation according to IEEE standards 802.1, 802.1q, and 802.3ad. 
-These features are only available after installation of open source 
-modules available on the Internet:
-For VLAN go to: http://www.candelatech.com/~greear/vlan.html
-For Link Aggregation go to: http://www.st.rim.or.jp/~yumo
-
-NOTE: SysKonnect GmbH does not offer any support for these open source 
-      modules and does not take the responsibility for any kind of 
-      failures or problems arising in connection with these modules.
-
-NOTE: Configuring Link Aggregation on a SysKonnect dual link adapter may 
-      cause problems when unloading the driver.
-
-
-7  Troubleshooting
-==================
-
-If any problems occur during the installation process, check the 
-following list:
-
-
-Problem:  The SK-98xx adapter cannot be found by the driver.
-Solution: In /proc/pci search for the following entry:
-             'Ethernet controller: SysKonnect SK-98xx ...'
-          If this entry exists, the SK-98xx or SK-98xx V2.0 adapter has 
-          been found by the system and should be operational.
-          If this entry does not exist or if the file '/proc/pci' is not 
-          found, there may be a hardware problem or the PCI support may 
-          not be enabled in your kernel.
-          The adapter can be checked using the diagnostics program which 
-          is available on the SysKonnect web site:
-          www.syskonnect.com
-          
-          Some COMPAQ machines have problems dealing with PCI under Linux.
-          This problem is described in the 'PCI howto' document
-          (included in some distributions or available from the
-          web, e.g. at 'www.linux.org'). 
-
-
-Problem:  Programs such as 'ifconfig' or 'route' cannot be found or the 
-          error message 'Operation not permitted' is displayed.
-Reason:   You are not logged in as user 'root'.
-Solution: Logout and login as 'root' or change to 'root' via 'su'.
-
-
-Problem:  Upon use of the command 'ping <address>' the message
-          "ping: sendto: Network is unreachable" is displayed.
-Reason:   Your route is not set correctly.
-Solution: If you are using RedHat, you probably forgot to set up the 
-          route in the 'network configuration'.
-          Check the existing routes with the 'route' command and check 
-          if an entry for 'eth0' exists, and if so, if it is set correctly.
-
-
-Problem:  The driver can be started, the adapter is connected to the 
-          network, but you cannot receive or transmit any packets; 
-          e.g. 'ping' does not work.
-Reason:   There is an incorrect route in your routing table.
-Solution: Check the routing table with the command 'route' and read the 
-          manual help pages dealing with routes (enter 'man route').
-
-NOTE: Although the 2.2.x kernel versions generate the routing entry 
-      automatically, problems of this kind may occur here as well. We've 
-      come across a situation in which the driver started correctly at 
-      system start, but after the driver has been removed and reloaded,
-      the route of the adapter's network pointed to the 'dummy0'device 
-      and had to be corrected manually.
-
-
-Problem:  Your computer should act as a router between multiple 
-          IP subnetworks (using multiple adapters), but computers in 
-          other subnetworks cannot be reached.
-Reason:   Either the router's kernel is not configured for IP forwarding 
-          or the routing table and gateway configuration of at least one 
-          computer is not working.
-
-Problem:  Upon driver start, the following error message is displayed:
-          "eth0: -- ERROR --
-          Class: internal Software error
-          Nr:    0xcc
-          Msg:   SkGeInitPort() cannot init running ports"
-Reason:   You are using a driver compiled for single processor machines 
-          on a multiprocessor machine with SMP (Symmetric MultiProcessor) 
-          kernel.
-Solution: Configure your kernel appropriately and recompile the kernel or
-          the modules.
-
-
-
-If your problem is not listed here, please contact SysKonnect's technical
-support for help (linux@syskonnect.de).
-When contacting our technical support, please ensure that the following 
-information is available:
-- System Manufacturer and HW Informations (CPU, Memory... )
-- PCI-Boards in your system
-- Distribution
-- Kernel version
-- Driver version
-***
-
-
-
-***End of Readme File***
diff --git a/Documentation/nmi_watchdog.txt b/Documentation/nmi_watchdog.txt
index c025a45..757c729 100644
--- a/Documentation/nmi_watchdog.txt
+++ b/Documentation/nmi_watchdog.txt
@@ -23,8 +23,7 @@
 may implicitly disable the NMI watchdog.]
 
 For x86-64, the needed APIC is always compiled in, and the NMI watchdog is
-always enabled with I/O-APIC mode (nmi_watchdog=1). Currently, local APIC
-mode (nmi_watchdog=2) does not work on x86-64.
+always enabled with I/O-APIC mode (nmi_watchdog=1).
 
 Using local APIC (nmi_watchdog=2) needs the first performance register, so
 you can't use it for other purposes (such as high precision performance
diff --git a/Documentation/scheduler/00-INDEX b/Documentation/scheduler/00-INDEX
index b5f5ca0..fc234d0 100644
--- a/Documentation/scheduler/00-INDEX
+++ b/Documentation/scheduler/00-INDEX
@@ -12,5 +12,7 @@
 	- information on scheduling domains.
 sched-nice-design.txt
 	- How and why the scheduler's nice levels are implemented.
+sched-rt-group.txt
+	- real-time group scheduling.
 sched-stats.txt
 	- information on schedstats (Linux Scheduler Statistics).
diff --git a/Documentation/sched-rt-group.txt b/Documentation/scheduler/sched-rt-group.txt
similarity index 100%
rename from Documentation/sched-rt-group.txt
rename to Documentation/scheduler/sched-rt-group.txt
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index 8861e47..6d5f1814 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -116,6 +116,13 @@
 starting low (CPOL=0) and data stabilized for sampling during the
 trailing clock edge (CPHA=1), that's SPI mode 1.
 
+Note that the clock mode is relevant as soon as the chipselect goes
+active.  So the master must set the clock to inactive before selecting
+a slave, and the slave can tell the chosen polarity by sampling the
+clock level when its select line goes active.  That's why many devices
+support for example both modes 0 and 3:  they don't care about polarity,
+and alway clock data in/out on rising clock edges.
+
 
 How do these driver programming interfaces work?
 ------------------------------------------------
@@ -379,8 +386,14 @@
       + when bidirectional reads and writes start ... by how its
         sequence of spi_transfer requests is arranged;
 
+      + which I/O buffers are used ... each spi_transfer wraps a
+        buffer for each transfer direction, supporting full duplex
+        (two pointers, maybe the same one in both cases) and half
+        duplex (one pointer is NULL) transfers;
+
       + optionally defining short delays after transfers ... using
-        the spi_transfer.delay_usecs setting;
+        the spi_transfer.delay_usecs setting (this delay can be the
+        only protocol effect, if the buffer length is zero);
 
       + whether the chipselect becomes inactive after a transfer and
         any delay ... by using the spi_transfer.cs_change flag;
diff --git a/Documentation/spinlocks.txt b/Documentation/spinlocks.txt
index 471e7538..619699d 100644
--- a/Documentation/spinlocks.txt
+++ b/Documentation/spinlocks.txt
@@ -5,6 +5,28 @@
 __SPIN_LOCK_UNLOCKED()/__RW_LOCK_UNLOCKED() as appropriate for static
 initialization.
 
+Most of the time, you can simply turn:
+
+	static spinlock_t xxx_lock = SPIN_LOCK_UNLOCKED;
+
+into:
+
+	static DEFINE_SPINLOCK(xxx_lock);
+
+Static structure member variables go from:
+
+	struct foo bar {
+		.lock	=	SPIN_LOCK_UNLOCKED;
+	};
+
+to:
+
+	struct foo bar {
+		.lock	=	__SPIN_LOCK_UNLOCKED(bar.lock);
+	};
+
+Declaration of static rw_locks undergo a similar transformation.
+
 Dynamic initialization, when necessary, may be performed as
 demonstrated below.
 
diff --git a/Documentation/unaligned-memory-access.txt b/Documentation/unaligned-memory-access.txt
index 6223eac..b0472ac 100644
--- a/Documentation/unaligned-memory-access.txt
+++ b/Documentation/unaligned-memory-access.txt
@@ -57,7 +57,7 @@
    unaligned access to be corrected.
  - Some architectures are not capable of unaligned memory access, but will
    silently perform a different memory access to the one that was requested,
-   resulting a a subtle code bug that is hard to detect!
+   resulting in a subtle code bug that is hard to detect!
 
 It should be obvious from the above that if your code causes unaligned
 memory accesses to happen, your code will not work correctly on certain
@@ -209,7 +209,7 @@
 
 	u32 value = get_unaligned((u32 *) data);
 
-These macros work work for memory accesses of any length (not just 32 bits as
+These macros work for memory accesses of any length (not just 32 bits as
 in the examples above). Be aware that when compared to standard access of
 aligned memory, using these macros to access unaligned memory can be costly in
 terms of performance.
diff --git a/MAINTAINERS b/MAINTAINERS
index d1c7be3..a1d3dc8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -163,6 +163,12 @@
 L:	linux-m68k@lists.linux-m68k.org
 S:	Maintained
 
+AFS FILESYSTEM & AF_RXRPC SOCKET DOMAIN
+P:	David Howells
+M:	dhowells@redhat.com
+L:	linux-afs@lists.infradead.org
+S:	Supported
+
 AIO
 P:	Benjamin LaHaise
 M:	bcrl@kvack.org
@@ -2116,7 +2122,7 @@
 L:	linux-wireless@vger.kernel.org
 L:	ipw3945-devel@lists.sourceforge.net
 W:	http://intellinuxwireless.org
-T:	git git://intellinuxwireless.org/repos/iwlwifi
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rchatre/iwlwifi-2.6.git
 S:	Supported
 
 IOC3 ETHERNET DRIVER
@@ -2320,14 +2326,14 @@
 S:	Maintained
 
 KPROBES
-P:	Prasanna S Panchamukhi
-M:	prasanna@in.ibm.com
 P:	Ananth N Mavinakayanahalli
 M:	ananth@in.ibm.com
 P:	Anil S Keshavamurthy
 M:	anil.s.keshavamurthy@intel.com
 P:	David S. Miller
 M:	davem@davemloft.net
+P:	Masami Hiramatsu
+M:	mhiramat@redhat.com
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
diff --git a/Makefile b/Makefile
index b08a259..21c76f71 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 25
-EXTRAVERSION = -rc7
+EXTRAVERSION = -rc9
 NAME = Funky Weasel is Jiggy wit it
 
 # *DOCUMENTATION*
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index 4e1c086..dd6e334 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -424,11 +424,13 @@
    else DMA_ADDRP is undefined.  */
 
 void *
-pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp)
+__pci_alloc_consistent(struct pci_dev *pdev, size_t size,
+		       dma_addr_t *dma_addrp, gfp_t gfp)
 {
 	void *cpu_addr;
 	long order = get_order(size);
-	gfp_t gfp = GFP_ATOMIC;
+
+	gfp &= ~GFP_DMA;
 
 try_again:
 	cpu_addr = (void *)__get_free_pages(gfp, order);
@@ -458,7 +460,7 @@
 
 	return cpu_addr;
 }
-EXPORT_SYMBOL(pci_alloc_consistent);
+EXPORT_SYMBOL(__pci_alloc_consistent);
 
 /* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
    be values that were returned from pci_alloc_consistent.  SIZE must
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ac1bef1..a34cc03 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -476,6 +476,7 @@
 config ARCH_OMAP
 	bool "TI OMAP"
 	select GENERIC_GPIO
+	select HAVE_GPIO_LIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 5382622..5fe9588 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -120,6 +120,7 @@
 			  time, when they all three were 0. */
 		       bits_pd = __raw_readl(IT8152_INTC_PDCNIRR);
 		       bits_lp = __raw_readl(IT8152_INTC_LPCNIRR);
+		       bits_ld = __raw_readl(IT8152_INTC_LDCNIRR);
 		       if (!(bits_ld | bits_lp | bits_pd))
 			       return;
 	       }
@@ -133,14 +134,14 @@
 
 	       bits_lp &= ((1 << IT8152_LP_IRQ_COUNT) - 1);
 	       while (bits_lp) {
-		       i = __ffs(bits_pd);
+		       i = __ffs(bits_lp);
 		       it8152_irq(IT8152_LP_IRQ(i));
 		       bits_lp &= ~(1 << i);
 	       }
 
 	       bits_ld &= ((1 << IT8152_LD_IRQ_COUNT) - 1);
 	       while (bits_ld) {
-		       i = __ffs(bits_pd);
+		       i = __ffs(bits_ld);
 		       it8152_irq(IT8152_LD_IRQ(i));
 		       bits_ld &= ~(1 << i);
 	       }
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 95f1c12..30a67a5 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -336,7 +336,7 @@
 		CALL(sys_mknodat)
 /* 325 */	CALL(sys_fchownat)
 		CALL(sys_futimesat)
-		CALL(sys_fstatat64)
+		CALL(ABI(sys_fstatat64,  sys_oabi_fstatat64))
 		CALL(sys_unlinkat)
 		CALL(sys_renameat)
 /* 330 */	CALL(sys_linkat)
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index e8b9804..96ab5f5 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -25,6 +25,7 @@
  * sys_stat64:
  * sys_lstat64:
  * sys_fstat64:
+ * sys_fstatat64:
  *
  *   struct stat64 has different sizes and some members are shifted
  *   Compatibility wrappers are needed for them and provided below.
@@ -169,6 +170,29 @@
 	return error;
 }
 
+asmlinkage long sys_oabi_fstatat64(int dfd,
+				   char __user *filename,
+				   struct oldabi_stat64  __user *statbuf,
+				   int flag)
+{
+	struct kstat stat;
+	int error = -EINVAL;
+
+	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
+		goto out;
+
+	if (flag & AT_SYMLINK_NOFOLLOW)
+		error = vfs_lstat_fd(dfd, filename, &stat);
+	else
+		error = vfs_stat_fd(dfd, filename, &stat);
+
+	if (!error)
+	error = cp_oldabi_stat64(&stat, statbuf);
+
+out:
+	return error;
+}
+
 struct oabi_flock64 {
 	short	l_type;
 	short	l_whence;
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 015a66b..c06f525 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -5,7 +5,8 @@
 # Common support
 obj-y := io.o id.o clock.o irq.o mux.o serial.o devices.o
 
-obj-$(CONFIG_OMAP_MPU_TIMER)		+= time.o
+obj-$(CONFIG_OMAP_MPU_TIMER)	+= time.o
+obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
 
 # Power Management
 obj-$(CONFIG_PM) += pm.o sleep.o
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 5279e35..4f9baba 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -32,6 +32,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/i2c.h>
+#include <linux/leds.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -183,11 +184,80 @@
 	&osk5912_mcbsp1_device,
 };
 
+static struct gpio_led tps_leds[] = {
+	/* NOTE:  D9 and D2 have hardware blink support.
+	 * Also, D9 requires non-battery power.
+	 */
+	{ .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9", },
+	{ .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
+	{ .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
+			.default_trigger = "heartbeat", },
+};
+
+static struct gpio_led_platform_data tps_leds_data = {
+	.num_leds	= 3,
+	.leds		= tps_leds,
+};
+
+static struct platform_device osk5912_tps_leds = {
+	.name			= "leds-gpio",
+	.id			= 0,
+	.dev.platform_data	= &tps_leds_data,
+};
+
+static int osk_tps_setup(struct i2c_client *client, void *context)
+{
+	/* Set GPIO 1 HIGH to disable VBUS power supply;
+	 * OHCI driver powers it up/down as needed.
+	 */
+	gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en");
+	gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1);
+
+	/* Set GPIO 2 high so LED D3 is off by default */
+	tps65010_set_gpio_out_value(GPIO2, HIGH);
+
+	/* Set GPIO 3 low to take ethernet out of reset */
+	gpio_request(OSK_TPS_GPIO_LAN_RESET, "smc_reset");
+	gpio_direction_output(OSK_TPS_GPIO_LAN_RESET, 0);
+
+	/* GPIO4 is VDD_DSP */
+	gpio_request(OSK_TPS_GPIO_DSP_PWR_EN, "dsp_power");
+	gpio_direction_output(OSK_TPS_GPIO_DSP_PWR_EN, 1);
+	/* REVISIT if DSP support isn't configured, power it off ... */
+
+	/* Let LED1 (D9) blink; leds-gpio may override it */
+	tps65010_set_led(LED1, BLINK);
+
+	/* Set LED2 off by default */
+	tps65010_set_led(LED2, OFF);
+
+	/* Enable LOW_PWR handshake */
+	tps65010_set_low_pwr(ON);
+
+	/* Switch VLDO2 to 3.0V for AIC23 */
+	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V
+			| TPS_LDO1_ENABLE);
+
+	/* register these three LEDs */
+	osk5912_tps_leds.dev.parent = &client->dev;
+	platform_device_register(&osk5912_tps_leds);
+
+	return 0;
+}
+
+static struct tps65010_board tps_board = {
+	.base		= OSK_TPS_GPIO_BASE,
+	.outmask	= 0x0f,
+	.setup		= osk_tps_setup,
+};
+
 static struct i2c_board_info __initdata osk_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("tps65010", 0x48),
 		.type		= "tps65010",
 		.irq		= OMAP_GPIO_IRQ(OMAP_MPUIO(1)),
+		.platform_data	= &tps_board,
+
 	},
 	/* TODO when driver support is ready:
 	 *  - aic23 audio chip at 0x1a
@@ -198,7 +268,7 @@
 
 static void __init osk_init_smc91x(void)
 {
-	if ((omap_request_gpio(0)) < 0) {
+	if ((gpio_request(0, "smc_irq")) < 0) {
 		printk("Error requesting gpio 0 for smc91x irq\n");
 		return;
 	}
@@ -210,7 +280,7 @@
 static void __init osk_init_cf(void)
 {
 	omap_cfg_reg(M7_1610_GPIO62);
-	if ((omap_request_gpio(62)) < 0) {
+	if ((gpio_request(62, "cf_irq")) < 0) {
 		printk("Error requesting gpio 62 for CF irq\n");
 		return;
 	}
@@ -334,7 +404,7 @@
 
 static int mistral_get_pendown_state(void)
 {
-	return !omap_get_gpio_datain(4);
+	return !gpio_get_value(4);
 }
 
 static const struct ads7846_platform_data mistral_ts_info = {
@@ -396,25 +466,31 @@
 	omap_cfg_reg(W14_1610_CCP_DATAP);
 
 	/* CAM_PWDN */
-	if (omap_request_gpio(11) == 0) {
+	if (gpio_request(11, "cam_pwdn") == 0) {
 		omap_cfg_reg(N20_1610_GPIO11);
-		omap_set_gpio_direction(11, 0 /* out */);
-		omap_set_gpio_dataout(11, 0 /* off */);
+		gpio_direction_output(11, 0);
 	} else
 		pr_debug("OSK+Mistral: CAM_PWDN is awol\n");
 
 
 	/* omap_cfg_reg(P19_1610_GPIO6); */	/* BUSY */
+	gpio_request(6, "ts_busy");
+	gpio_direction_input(6);
+
 	omap_cfg_reg(P20_1610_GPIO4);	/* PENIRQ */
+	gpio_request(4, "ts_int");
+	gpio_direction_input(4);
 	set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING);
+
 	spi_register_board_info(mistral_boardinfo,
 			ARRAY_SIZE(mistral_boardinfo));
 
 	/* the sideways button (SW1) is for use as a "wakeup" button */
 	omap_cfg_reg(N15_1610_MPUIO2);
-	if (omap_request_gpio(OMAP_MPUIO(2)) == 0) {
+	if (gpio_request(OMAP_MPUIO(2), "wakeup") == 0) {
 		int ret = 0;
-		omap_set_gpio_direction(OMAP_MPUIO(2), 1);
+
+		gpio_direction_input(OMAP_MPUIO(2));
 		set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING);
 #ifdef	CONFIG_PM
 		/* share the IRQ in case someone wants to use the
@@ -425,7 +501,7 @@
 				IRQF_SHARED, "mistral_wakeup",
 				&osk_mistral_wake_interrupt);
 		if (ret != 0) {
-			omap_free_gpio(OMAP_MPUIO(2));
+			gpio_free(OMAP_MPUIO(2));
 			printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n",
 				ret);
 		} else
@@ -438,10 +514,8 @@
 	 * board, like the touchscreen, EEPROM, and wakeup (!) switch.
 	 */
 	omap_cfg_reg(PWL);
-	if (omap_request_gpio(2) == 0) {
-		omap_set_gpio_direction(2, 0 /* out */);
-		omap_set_gpio_dataout(2, 1 /* on */);
-	}
+	if (gpio_request(2, "lcd_pwr") == 0)
+		gpio_direction_output(2, 1);
 
 	platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
 }
@@ -484,44 +558,6 @@
 	omap1_map_common_io();
 }
 
-#ifdef CONFIG_TPS65010
-static int __init osk_tps_init(void)
-{
-	if (!machine_is_omap_osk())
-		return 0;
-
-	/* Let LED1 (D9) blink */
-	tps65010_set_led(LED1, BLINK);
-
-	/* Disable LED 2 (D2) */
-	tps65010_set_led(LED2, OFF);
-
-	/* Set GPIO 1 HIGH to disable VBUS power supply;
-	 * OHCI driver powers it up/down as needed.
-	 */
-	tps65010_set_gpio_out_value(GPIO1, HIGH);
-
-	/* Set GPIO 2 low to turn on LED D3 */
-	tps65010_set_gpio_out_value(GPIO2, HIGH);
-
-	/* Set GPIO 3 low to take ethernet out of reset */
-	tps65010_set_gpio_out_value(GPIO3, LOW);
-
-	/* gpio4 for VDD_DSP */
-	/* FIXME send power to DSP iff it's configured */
-
-	/* Enable LOW_PWR */
-	tps65010_set_low_pwr(ON);
-
-	/* Switch VLDO2 to 3.0V for AIC23 */
-	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V
-			| TPS_LDO1_ENABLE);
-
-	return 0;
-}
-fs_initcall(osk_tps_init);
-#endif
-
 MACHINE_START(OMAP_OSK, "TI-OSK")
 	/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
 	.phys_io	= 0xfff00000,
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
index 026685e..754383d 100644
--- a/arch/arm/mach-omap1/leds-osk.c
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -1,11 +1,9 @@
 /*
  * linux/arch/arm/mach-omap1/leds-osk.c
  *
- * LED driver for OSK, and optionally Mistral QVGA, boards
+ * LED driver for OSK with optional Mistral QVGA board
  */
 #include <linux/init.h>
-#include <linux/workqueue.h>
-#include <linux/i2c/tps65010.h>
 
 #include <asm/hardware.h>
 #include <asm/leds.h>
@@ -20,49 +18,11 @@
 #define LED_STATE_CLAIMED	(1 << 1)
 static u8 led_state;
 
-#define	GREEN_LED		(1 << 0)	/* TPS65010 LED1 */
-#define	AMBER_LED		(1 << 1)	/* TPS65010 LED2 */
-#define	RED_LED			(1 << 2)	/* TPS65010 GPIO2 */
 #define	TIMER_LED		(1 << 3)	/* Mistral board */
 #define	IDLE_LED		(1 << 4)	/* Mistral board */
 static u8 hw_led_state;
 
 
-/* TPS65010 leds are changed using i2c -- from a task context.
- * Using one of these for the "idle" LED would be impractical...
- */
-#define	TPS_LEDS	(GREEN_LED | RED_LED | AMBER_LED)
-
-static u8 tps_leds_change;
-
-static void tps_work(struct work_struct *unused)
-{
-	for (;;) {
-		u8	leds;
-
-		local_irq_disable();
-		leds = tps_leds_change;
-		tps_leds_change = 0;
-		local_irq_enable();
-
-		if (!leds)
-			break;
-
-		/* careful:  the set_led() value is on/off/blink */
-		if (leds & GREEN_LED)
-			tps65010_set_led(LED1, !!(hw_led_state & GREEN_LED));
-		if (leds & AMBER_LED)
-			tps65010_set_led(LED2, !!(hw_led_state & AMBER_LED));
-
-		/* the gpio led doesn't have that issue */
-		if (leds & RED_LED)
-			tps65010_set_gpio_out_value(GPIO2,
-					!(hw_led_state & RED_LED));
-	}
-}
-
-static DECLARE_WORK(work, tps_work);
-
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 
 /* For now, all system indicators require the Mistral board, since that
@@ -112,7 +72,6 @@
 	case led_stop:
 		led_state &= ~LED_STATE_ENABLED;
 		hw_led_state = 0;
-		/* NOTE:  work may still be pending!! */
 		break;
 
 	case led_claim:
@@ -145,48 +104,11 @@
 
 #endif	/* CONFIG_OMAP_OSK_MISTRAL */
 
-	/* "green" == tps LED1 (leftmost, normally power-good)
-	 * works only with DC adapter, not on battery power!
-	 */
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= GREEN_LED;
-		break;
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~GREEN_LED;
-		break;
-
-	/* "amber" == tps LED2 (middle) */
-	case led_amber_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= AMBER_LED;
-		break;
-	case led_amber_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~AMBER_LED;
-		break;
-
-	/* "red" == LED on tps gpio3 (rightmost) */
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= RED_LED;
-		break;
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~RED_LED;
-		break;
-
 	default:
 		break;
 	}
 
 	leds ^= hw_led_state;
-	leds &= TPS_LEDS;
-	if (leds && (led_state & LED_STATE_CLAIMED)) {
-		tps_leds_change |= leds;
-		schedule_work(&work);
-	}
 
 done:
 	local_irq_restore(flags);
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 52c70e5..e207bf7 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -3,9 +3,9 @@
  *
  * OMAP1 pin multiplexing configurations
  *
- * Copyright (C) 2003 - 2005 Nokia Corporation
+ * Copyright (C) 2003 - 2008 Nokia Corporation
  *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ * Written by Tony Lindgren
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -32,8 +32,10 @@
 
 #ifdef CONFIG_OMAP_MUX
 
+static struct omap_mux_cfg arch_mux_cfg;
+
 #ifdef CONFIG_ARCH_OMAP730
-struct pin_config __initdata_or_module omap730_pins[] = {
+static struct pin_config __initdata_or_module omap730_pins[] = {
 MUX_CFG_730("E2_730_KBR0",        12,   21,    0,   20,   1, 0)
 MUX_CFG_730("J7_730_KBR1",        12,   25,    0,   24,   1, 0)
 MUX_CFG_730("E1_730_KBR2",        12,   29,    0,   28,   1, 0)
@@ -49,10 +51,14 @@
 MUX_CFG_730("W16_730_USB_PU_EN",   2,   25,    0,   24,   0, 0)
 MUX_CFG_730("W17_730_USB_VBUSI",   2,   29,    0,   28,   0, 0)
 };
-#endif
+#define OMAP730_PINS_SZ		ARRAY_SIZE(omap730_pins)
+#else
+#define omap730_pins		NULL
+#define OMAP730_PINS_SZ		0
+#endif	/* CONFIG_ARCH_OMAP730 */
 
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
-struct pin_config __initdata_or_module omap1xxx_pins[] = {
+static struct pin_config __initdata_or_module omap1xxx_pins[] = {
 /*
  *	 description		mux  mode   mux	 pull pull  pull  pu_pd	 pu  dbg
  *				reg  offset mode reg  bit   ena	  reg
@@ -306,22 +312,136 @@
 MUX_CFG("W13_1610_CCP_CLKM",	 9,    0,    6,   1,  28,   1,    1,     0,  0)
 MUX_CFG("W14_1610_CCP_DATAP",	 9,   24,    6,   2,   4,   1,    2,     0,  0)
 MUX_CFG("Y14_1610_CCP_DATAM",	 9,   21,    6,   2,   3,   1,    2,     0,  0)
-
 };
+#define OMAP1XXX_PINS_SZ	ARRAY_SIZE(omap1xxx_pins)
+#else
+#define omap1xxx_pins		NULL
+#define OMAP1XXX_PINS_SZ	0
 #endif	/* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */
 
+int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
+{
+	static DEFINE_SPINLOCK(mux_spin_lock);
+	unsigned long flags;
+	unsigned int reg_orig = 0, reg = 0, pu_pd_orig = 0, pu_pd = 0,
+		pull_orig = 0, pull = 0;
+	unsigned int mask, warn = 0;
+
+	/* Check the mux register in question */
+	if (cfg->mux_reg) {
+		unsigned	tmp1, tmp2;
+
+		spin_lock_irqsave(&mux_spin_lock, flags);
+		reg_orig = omap_readl(cfg->mux_reg);
+
+		/* The mux registers always seem to be 3 bits long */
+		mask = (0x7 << cfg->mask_offset);
+		tmp1 = reg_orig & mask;
+		reg = reg_orig & ~mask;
+
+		tmp2 = (cfg->mask << cfg->mask_offset);
+		reg |= tmp2;
+
+		if (tmp1 != tmp2)
+			warn = 1;
+
+		omap_writel(reg, cfg->mux_reg);
+		spin_unlock_irqrestore(&mux_spin_lock, flags);
+	}
+
+	/* Check for pull up or pull down selection on 1610 */
+	if (!cpu_is_omap15xx()) {
+		if (cfg->pu_pd_reg && cfg->pull_val) {
+			spin_lock_irqsave(&mux_spin_lock, flags);
+			pu_pd_orig = omap_readl(cfg->pu_pd_reg);
+			mask = 1 << cfg->pull_bit;
+
+			if (cfg->pu_pd_val) {
+				if (!(pu_pd_orig & mask))
+					warn = 1;
+				/* Use pull up */
+				pu_pd = pu_pd_orig | mask;
+			} else {
+				if (pu_pd_orig & mask)
+					warn = 1;
+				/* Use pull down */
+				pu_pd = pu_pd_orig & ~mask;
+			}
+			omap_writel(pu_pd, cfg->pu_pd_reg);
+			spin_unlock_irqrestore(&mux_spin_lock, flags);
+		}
+	}
+
+	/* Check for an associated pull down register */
+	if (cfg->pull_reg) {
+		spin_lock_irqsave(&mux_spin_lock, flags);
+		pull_orig = omap_readl(cfg->pull_reg);
+		mask = 1 << cfg->pull_bit;
+
+		if (cfg->pull_val) {
+			if (pull_orig & mask)
+				warn = 1;
+			/* Low bit = pull enabled */
+			pull = pull_orig & ~mask;
+		} else {
+			if (!(pull_orig & mask))
+				warn = 1;
+			/* High bit = pull disabled */
+			pull = pull_orig | mask;
+		}
+
+		omap_writel(pull, cfg->pull_reg);
+		spin_unlock_irqrestore(&mux_spin_lock, flags);
+	}
+
+	if (warn) {
+#ifdef CONFIG_OMAP_MUX_WARNINGS
+		printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
+#endif
+	}
+
+#ifdef CONFIG_OMAP_MUX_DEBUG
+	if (cfg->debug || warn) {
+		printk("MUX: Setting register %s\n", cfg->name);
+		printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
+		       cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
+
+		if (!cpu_is_omap15xx()) {
+			if (cfg->pu_pd_reg && cfg->pull_val) {
+				printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
+				       cfg->pu_pd_name, cfg->pu_pd_reg,
+				       pu_pd_orig, pu_pd);
+			}
+		}
+
+		if (cfg->pull_reg)
+			printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
+			       cfg->pull_name, cfg->pull_reg, pull_orig, pull);
+	}
+#endif
+
+#ifdef CONFIG_OMAP_MUX_ERRORS
+	return warn ? -ETXTBSY : 0;
+#else
+	return 0;
+#endif
+}
+
 int __init omap1_mux_init(void)
 {
+	if (cpu_is_omap730()) {
+		arch_mux_cfg.pins	= omap730_pins;
+		arch_mux_cfg.size	= OMAP730_PINS_SZ;
+		arch_mux_cfg.cfg_reg	= omap1_cfg_reg;
+	}
 
-#ifdef CONFIG_ARCH_OMAP730
-	omap_mux_register(omap730_pins, ARRAY_SIZE(omap730_pins));
-#endif
+	if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
+		arch_mux_cfg.pins	= omap1xxx_pins;
+		arch_mux_cfg.size	= OMAP1XXX_PINS_SZ;
+		arch_mux_cfg.cfg_reg	= omap1_cfg_reg;
+	}
 
-#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
-	omap_mux_register(omap1xxx_pins, ARRAY_SIZE(omap1xxx_pins));
-#endif
-
-	return 0;
+	return omap_mux_register(&arch_mux_cfg);
 }
 
 #endif
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index a4f8b205..5d2b270 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -56,37 +56,6 @@
 #define OMAP_MPU_TIMER_BASE		OMAP_MPU_TIMER1_BASE
 #define OMAP_MPU_TIMER_OFFSET		0x100
 
-/* cycles to nsec conversions taken from arch/i386/kernel/timers/timer_tsc.c,
- * converted to use kHz by Kevin Hilman */
-/* convert from cycles(64bits) => nanoseconds (64bits)
- *  basic equation:
- *		ns = cycles / (freq / ns_per_sec)
- *		ns = cycles * (ns_per_sec / freq)
- *		ns = cycles * (10^9 / (cpu_khz * 10^3))
- *		ns = cycles * (10^6 / cpu_khz)
- *
- *	Then we use scaling math (suggested by george at mvista.com) to get:
- *		ns = cycles * (10^6 * SC / cpu_khz / SC
- *		ns = cycles * cyc2ns_scale / SC
- *
- *	And since SC is a constant power of two, we can convert the div
- *  into a shift.
- *			-johnstul at us.ibm.com "math is hard, lets go shopping!"
- */
-static unsigned long cyc2ns_scale;
-#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
-
-static inline void set_cyc2ns_scale(unsigned long cpu_khz)
-{
-	cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
-}
-
-static inline unsigned long long cycles_2_ns(unsigned long long cyc)
-{
-	return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
-}
-
-
 typedef struct {
 	u32 cntl;			/* CNTL_TIMER, R/W */
 	u32 load_tim;			/* LOAD_TIM,   W */
@@ -194,8 +163,6 @@
 
 static __init void omap_init_mpu_timer(unsigned long rate)
 {
-	set_cyc2ns_scale(rate / 1000);
-
 	setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
 	omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
 
@@ -260,22 +227,6 @@
 		printk(err, clocksource_mpu.name);
 }
 
-
-/*
- * Scheduler clock - returns current time in nanosec units.
- */
-unsigned long long sched_clock(void)
-{
-	unsigned long ticks = 0 - omap_mpu_timer_read(1);
-	unsigned long long ticks64;
-
-	ticks64 = omap_mpu_timer2_overflows;
-	ticks64 <<= 32;
-	ticks64 |= ticks;
-
-	return cycles_2_ns(ticks64);
-}
-
 /*
  * ---------------------------------------------------------------------------
  * Timer initialization
diff --git a/arch/arm/plat-omap/timer32k.c b/arch/arm/mach-omap1/timer32k.c
similarity index 75%
rename from arch/arm/plat-omap/timer32k.c
rename to arch/arm/mach-omap1/timer32k.c
index ea76f19..fbbdb80 100644
--- a/arch/arm/plat-omap/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/plat-omap/timer32k.c
+ * linux/arch/arm/mach-omap1/timer32k.c
  *
  * OMAP 32K Timer
  *
@@ -70,8 +70,6 @@
 
 #if defined(CONFIG_ARCH_OMAP16XX)
 #define TIMER_32K_SYNCHRONIZED		0xfffbc410
-#elif defined(CONFIG_ARCH_OMAP24XX)
-#define TIMER_32K_SYNCHRONIZED		(OMAP24XX_32KSYNCT_BASE + 0x10)
 #else
 #error OMAP 32KHz timer does not currently work on 15XX!
 #endif
@@ -93,8 +91,6 @@
 #define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate)			\
 				(((nr_jiffies) * (clock_rate)) / HZ)
 
-#if defined(CONFIG_ARCH_OMAP1)
-
 static inline void omap_32k_timer_write(int val, int reg)
 {
 	omap_writew(val, OMAP1_32K_TIMER_BASE + reg);
@@ -120,30 +116,14 @@
 
 #define omap_32k_timer_ack_irq()
 
-#elif defined(CONFIG_ARCH_OMAP2)
-
-static struct omap_dm_timer *gptimer;
-
-static inline void omap_32k_timer_start(unsigned long load_val)
+static int omap_32k_timer_set_next_event(unsigned long delta,
+					 struct clock_event_device *dev)
 {
-	omap_dm_timer_set_load(gptimer, 1, 0xffffffff - load_val);
-	omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
-	omap_dm_timer_start(gptimer);
-}
+	omap_32k_timer_start(delta);
 
-static inline void omap_32k_timer_stop(void)
-{
-	omap_dm_timer_stop(gptimer);
+	return 0;
 }
 
-static inline void omap_32k_timer_ack_irq(void)
-{
-	u32 status = omap_dm_timer_read_status(gptimer);
-	omap_dm_timer_write_status(gptimer, status);
-}
-
-#endif
-
 static void omap_32k_timer_set_mode(enum clock_event_mode mode,
 				    struct clock_event_device *evt)
 {
@@ -164,8 +144,9 @@
 
 static struct clock_event_device clockevent_32k_timer = {
 	.name		= "32k-timer",
-	.features       = CLOCK_EVT_FEAT_PERIODIC,
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.shift		= 32,
+	.set_next_event	= omap_32k_timer_set_next_event,
 	.set_mode	= omap_32k_timer_set_mode,
 };
 
@@ -178,32 +159,6 @@
 	return omap_readl(TIMER_32K_SYNCHRONIZED);
 }
 
-/*
- * Rounds down to nearest usec. Note that this will overflow for larger values.
- */
-static inline unsigned long omap_32k_ticks_to_usecs(unsigned long ticks_32k)
-{
-	return (ticks_32k * 5*5*5*5*5*5) >> 9;
-}
-
-/*
- * Rounds down to nearest nsec.
- */
-static inline unsigned long long
-omap_32k_ticks_to_nsecs(unsigned long ticks_32k)
-{
-	return (unsigned long long) ticks_32k * 1000 * 5*5*5*5*5*5 >> 9;
-}
-
-/*
- * Returns current time from boot in nsecs. It's OK for this to wrap
- * around for now, as it's just a relative time stamp.
- */
-unsigned long long sched_clock(void)
-{
-	return omap_32k_ticks_to_nsecs(omap_32k_sync_timer_read());
-}
-
 static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evt = &clockevent_32k_timer;
@@ -222,22 +177,7 @@
 
 static __init void omap_init_32k_timer(void)
 {
-	if (cpu_class_is_omap1())
-		setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
-
-#ifdef CONFIG_ARCH_OMAP2
-	/* REVISIT: Check 24xx TIOCP_CFG settings after idle works */
-	if (cpu_is_omap24xx()) {
-		gptimer = omap_dm_timer_request_specific(1);
-		BUG_ON(gptimer == NULL);
-
-		omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);
-		setup_irq(omap_dm_timer_get_irq(gptimer), &omap_32k_timer_irq);
-		omap_dm_timer_set_int_enable(gptimer,
-			OMAP_TIMER_INT_CAPTURE | OMAP_TIMER_INT_OVERFLOW |
-			OMAP_TIMER_INT_MATCH);
-	}
-#endif
+	setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
 
 	clockevent_32k_timer.mult = div_sc(OMAP_32K_TICKS_PER_SEC,
 					   NSEC_PER_SEC,
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index b05b738..2feb687 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,13 +3,15 @@
 #
 
 # Common support
-obj-y := irq.o id.o io.o sram-fn.o memory.o prcm.o clock.o mux.o devices.o \
-	 serial.o gpmc.o
-
-obj-$(CONFIG_OMAP_MPU_TIMER)		+= timer-gp.o
+obj-y := irq.o id.o io.o sram-fn.o memory.o control.o prcm.o clock.o mux.o \
+		devices.o serial.o gpmc.o timer-gp.o
 
 # Power Management
-obj-$(CONFIG_PM) += pm.o pm-domain.o sleep.o
+obj-$(CONFIG_PM) += pm.o sleep.o
+
+# Clock framework
+obj-$(CONFIG_ARCH_OMAP2)		+= clock24xx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o
 
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 64235de..1c12d7c 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -33,7 +33,6 @@
 #include <asm/arch/board.h>
 #include <asm/arch/common.h>
 #include <asm/arch/gpmc.h>
-#include "prcm-regs.h"
 
 #include <asm/io.h>
 
@@ -125,15 +124,18 @@
 	int eth_cs;
 	unsigned long cs_mem_base;
 	unsigned int rate;
-	struct clk *l3ck;
+	struct clk *gpmc_fck;
 
 	eth_cs = SDP2430_SMC91X_CS;
 
-	l3ck = clk_get(NULL, "core_l3_ck");
-	if (IS_ERR(l3ck))
-		rate = 100000000;
-	else
-		rate = clk_get_rate(l3ck);
+	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */
+	if (IS_ERR(gpmc_fck)) {
+		WARN_ON(1);
+		return;
+	}
+
+	clk_enable(gpmc_fck);
+	rate = clk_get_rate(gpmc_fck);
 
 	/* Make sure CS1 timings are correct, for 2430 always muxed */
 	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);
@@ -160,7 +162,7 @@
 
 	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
 		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		return;
+		goto out;
 	}
 
 	sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300;
@@ -171,10 +173,13 @@
 		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
 			OMAP24XX_ETHR_GPIO_IRQ);
 		gpmc_cs_free(eth_cs);
-		return;
+		goto out;
 	}
 	omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1);
 
+out:
+	clk_disable(gpmc_fck);
+	clk_put(gpmc_fck);
 }
 
 static void __init omap_2430sdp_init_irq(void)
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 7846551..a1e1e67 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -26,6 +26,8 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
@@ -39,7 +41,7 @@
 #include <asm/arch/board.h>
 #include <asm/arch/common.h>
 #include <asm/arch/gpmc.h>
-#include "prcm-regs.h"
+#include <asm/arch/control.h>
 
 /* LED & Switch macros */
 #define LED0_GPIO13		13
@@ -187,17 +189,47 @@
 {
 	unsigned long base;
 
+	unsigned int rate;
+	struct clk *gpmc_fck;
+	int eth_cs;
+
+	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */
+	if (IS_ERR(gpmc_fck)) {
+		WARN_ON(1);
+		return;
+	}
+
+	clk_enable(gpmc_fck);
+	rate = clk_get_rate(gpmc_fck);
+
+	eth_cs = APOLLON_ETH_CS;
+
 	/* Make sure CS1 timings are correct */
-	GPMC_CONFIG1_1 = 0x00011203;
-	GPMC_CONFIG2_1 = 0x001f1f01;
-	GPMC_CONFIG3_1 = 0x00080803;
-	GPMC_CONFIG4_1 = 0x1c091c09;
-	GPMC_CONFIG5_1 = 0x041f1f1f;
-	GPMC_CONFIG6_1 = 0x000004c4;
+	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);
+
+	if (rate >= 160000000) {
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
+	} else if (rate >= 130000000) {
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
+	} else {/* rate = 100000000 */
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
+	}
 
 	if (gpmc_cs_request(APOLLON_ETH_CS, SZ_16M, &base) < 0) {
 		printk(KERN_ERR "Failed to request GPMC CS for smc91x\n");
-		return;
+		goto out;
 	}
 	apollon_smc91x_resources[0].start = base + 0x300;
 	apollon_smc91x_resources[0].end   = base + 0x30f;
@@ -208,9 +240,13 @@
 		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
 			APOLLON_ETHR_GPIO_IRQ);
 		gpmc_cs_free(APOLLON_ETH_CS);
-		return;
+		goto out;
 	}
 	omap_set_gpio_direction(APOLLON_ETHR_GPIO_IRQ, 1);
+
+out:
+	clk_disable(gpmc_fck);
+	clk_put(gpmc_fck);
 }
 
 static void __init omap_apollon_init_irq(void)
@@ -330,6 +366,8 @@
 
 static void __init omap_apollon_init(void)
 {
+	u32 v;
+
 	apollon_led_init();
 	apollon_sw_init();
 	apollon_flash_init();
@@ -339,7 +377,9 @@
 	omap_cfg_reg(W19_24XX_SYS_NIRQ);
 
 	/* Use Interal loop-back in MMC/SDIO Module Input Clock selection */
-	CONTROL_DEVCONF |= (1 << 24);
+	v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	v |= (1 << 24);
+	omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
 
 	/*
  	 * Make sure the serial ports are muxed on at this point.
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index f125f43..d1915f9 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -19,6 +19,8 @@
 #include <linux/delay.h>
 #include <linux/workqueue.h>
 #include <linux/input.h>
+#include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
@@ -26,6 +28,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
+#include <asm/arch/control.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/gpioexpander.h>
 #include <asm/arch/mux.h>
@@ -36,10 +39,13 @@
 #include <asm/arch/keypad.h>
 #include <asm/arch/menelaus.h>
 #include <asm/arch/dma.h>
-#include "prcm-regs.h"
+#include <asm/arch/gpmc.h>
 
 #include <asm/io.h>
 
+#define H4_FLASH_CS	0
+#define H4_SMC91X_CS	1
+
 static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
 static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
 
@@ -116,8 +122,6 @@
 };
 
 static struct resource h4_flash_resource = {
-	.start		= H4_CS0_BASE,
-	.end		= H4_CS0_BASE + SZ_64M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -253,21 +257,107 @@
 	&h4_lcd_device,
 };
 
+/* 2420 Sysboot setup (2430 is different) */
+static u32 get_sysboot_value(void)
+{
+	return (omap_ctrl_readl(OMAP24XX_CONTROL_STATUS) &
+		(OMAP2_SYSBOOT_5_MASK | OMAP2_SYSBOOT_4_MASK |
+		 OMAP2_SYSBOOT_3_MASK | OMAP2_SYSBOOT_2_MASK |
+		 OMAP2_SYSBOOT_1_MASK | OMAP2_SYSBOOT_0_MASK));
+}
+
+/* H4-2420's always used muxed mode, H4-2422's always use non-muxed
+ *
+ * Note: OMAP-GIT doesn't correctly do is_cpu_omap2422 and is_cpu_omap2423
+ *  correctly.  The macro needs to look at production_id not just hawkeye.
+ */
+static u32 is_gpmc_muxed(void)
+{
+	u32 mux;
+	mux = get_sysboot_value();
+	if ((mux & 0xF) == 0xd)
+		return 1;	/* NAND config (could be either) */
+	if (mux & 0x2)		/* if mux'ed */
+		return 1;
+	else
+		return 0;
+}
+
 static inline void __init h4_init_debug(void)
 {
+	int eth_cs;
+	unsigned long cs_mem_base;
+	unsigned int muxed, rate;
+	struct clk *gpmc_fck;
+
+	eth_cs	= H4_SMC91X_CS;
+
+	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */
+	if (IS_ERR(gpmc_fck)) {
+		WARN_ON(1);
+		return;
+	}
+
+	clk_enable(gpmc_fck);
+	rate = clk_get_rate(gpmc_fck);
+	clk_disable(gpmc_fck);
+	clk_put(gpmc_fck);
+
+	if (is_gpmc_muxed())
+		muxed = 0x200;
+	else
+		muxed = 0;
+
 	/* Make sure CS1 timings are correct */
-	GPMC_CONFIG1_1 = 0x00011200;
-	GPMC_CONFIG2_1 = 0x001f1f01;
-	GPMC_CONFIG3_1 = 0x00080803;
-	GPMC_CONFIG4_1 = 0x1c091c09;
-	GPMC_CONFIG5_1 = 0x041f1f1f;
-	GPMC_CONFIG6_1 = 0x000004c4;
-	GPMC_CONFIG7_1 = 0x00000f40 | (0x08000000 >> 24);
+	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1,
+			  0x00011000 | muxed);
+
+	if (rate >= 160000000) {
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
+	} else if (rate >= 130000000) {
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
+	} else {/* rate = 100000000 */
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
+	}
+
+	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+		goto out;
+	}
+
 	udelay(100);
 
 	omap_cfg_reg(M15_24XX_GPIO92);
 	if (debug_card_init(cs_mem_base, OMAP24XX_ETHR_GPIO_IRQ) < 0)
 		gpmc_cs_free(eth_cs);
+
+out:
+	clk_disable(gpmc_fck);
+	clk_put(gpmc_fck);
+}
+
+static void __init h4_init_flash(void)
+{
+	unsigned long base;
+
+	if (gpmc_cs_request(H4_FLASH_CS, SZ_64M, &base) < 0) {
+		printk("Can't request GPMC CS for flash\n");
+		return;
+	}
+	h4_flash_resource.start	= base;
+	h4_flash_resource.end	= base + SZ_64M - 1;
 }
 
 static void __init omap_h4_init_irq(void)
@@ -275,6 +365,7 @@
 	omap2_init_common_hw();
 	omap_init_irq();
 	omap_gpio_init();
+	h4_init_flash();
 }
 
 static struct omap_uart_config h4_uart_config __initdata = {
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index e6e85b7..b57ffb5 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -1,20 +1,19 @@
 /*
  *  linux/arch/arm/mach-omap2/clock.c
  *
- *  Copyright (C) 2005 Texas Instruments Inc.
+ *  Copyright (C) 2005-2008 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2008 Nokia Corporation
+ *
+ *  Contacts:
  *  Richard Woodruff <r-woodruff2@ti.com>
- *  Created for OMAP2.
- *
- *  Cleaned up and modified to use omap shared clock framework by
- *  Tony Lindgren <tony@atomide.com>
- *
- *  Based on omap1 clock.c, Copyright (C) 2004 - 2005 Nokia corporation
- *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Paul Walmsley
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#undef DEBUG
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
@@ -22,176 +21,227 @@
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
+#include <asm/bitops.h>
 
 #include <asm/io.h>
 
 #include <asm/arch/clock.h>
 #include <asm/arch/sram.h>
+#include <asm/arch/cpu.h>
 #include <asm/div64.h>
 
-#include "prcm-regs.h"
 #include "memory.h"
+#include "sdrc.h"
 #include "clock.h"
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "cm-regbits-34xx.h"
 
-#undef DEBUG
+#define MAX_CLOCK_ENABLE_WAIT		100000
 
-//#define DOWN_VARIABLE_DPLL 1			/* Experimental */
-
-static struct prcm_config *curr_prcm_set;
-static u32 curr_perf_level = PRCM_FULL_SPEED;
-static struct clk *vclk;
-static struct clk *sclk;
+u8 cpu_mask;
 
 /*-------------------------------------------------------------------------
  * Omap2 specific clock functions
  *-------------------------------------------------------------------------*/
 
-/* Recalculate SYST_CLK */
-static void omap2_sys_clk_recalc(struct clk * clk)
+/**
+ * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware
+ * @clk: OMAP clock struct ptr to use
+ *
+ * Given a pointer to a source-selectable struct clk, read the hardware
+ * register and determine what its parent is currently set to.  Update the
+ * clk->parent field with the appropriate clk ptr.
+ */
+void omap2_init_clksel_parent(struct clk *clk)
 {
-	u32 div = PRCM_CLKSRC_CTRL;
-	div &= (1 << 7) | (1 << 6);	/* Test if ext clk divided by 1 or 2 */
-	div >>= clk->rate_offset;
-	clk->rate = (clk->parent->rate / div);
-	propagate_rate(clk);
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
+	u32 r, found = 0;
+
+	if (!clk->clksel)
+		return;
+
+	r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
+	r >>= __ffs(clk->clksel_mask);
+
+	for (clks = clk->clksel; clks->parent && !found; clks++) {
+		for (clkr = clks->rates; clkr->div && !found; clkr++) {
+			if ((clkr->flags & cpu_mask) && (clkr->val == r)) {
+				if (clk->parent != clks->parent) {
+					pr_debug("clock: inited %s parent "
+						 "to %s (was %s)\n",
+						 clk->name, clks->parent->name,
+						 ((clk->parent) ?
+						  clk->parent->name : "NULL"));
+					clk->parent = clks->parent;
+				};
+				found = 1;
+			}
+		}
+	}
+
+	if (!found)
+		printk(KERN_ERR "clock: init parent: could not find "
+		       "regval %0x for clock %s\n", r,  clk->name);
+
+	return;
 }
 
-static u32 omap2_get_dpll_rate(struct clk * tclk)
+/* Returns the DPLL rate */
+u32 omap2_get_dpll_rate(struct clk *clk)
 {
 	long long dpll_clk;
-	int dpll_mult, dpll_div, amult;
+	u32 dpll_mult, dpll_div, dpll;
+	const struct dpll_data *dd;
 
-	dpll_mult = (CM_CLKSEL1_PLL >> 12) & 0x03ff;	/* 10 bits */
-	dpll_div = (CM_CLKSEL1_PLL >> 8) & 0x0f;	/* 4 bits */
-	dpll_clk = (long long)tclk->parent->rate * dpll_mult;
+	dd = clk->dpll_data;
+	/* REVISIT: What do we return on error? */
+	if (!dd)
+		return 0;
+
+	dpll = __raw_readl(dd->mult_div1_reg);
+	dpll_mult = dpll & dd->mult_mask;
+	dpll_mult >>= __ffs(dd->mult_mask);
+	dpll_div = dpll & dd->div1_mask;
+	dpll_div >>= __ffs(dd->div1_mask);
+
+	dpll_clk = (long long)clk->parent->rate * dpll_mult;
 	do_div(dpll_clk, dpll_div + 1);
-	amult = CM_CLKSEL2_PLL & 0x3;
-	dpll_clk *= amult;
 
 	return dpll_clk;
 }
 
-static void omap2_followparent_recalc(struct clk *clk)
+/*
+ * Used for clocks that have the same value as the parent clock,
+ * divided by some factor
+ */
+void omap2_fixed_divisor_recalc(struct clk *clk)
 {
-	followparent_recalc(clk);
+	WARN_ON(!clk->fixed_div);
+
+	clk->rate = clk->parent->rate / clk->fixed_div;
+
+	if (clk->flags & RATE_PROPAGATES)
+		propagate_rate(clk);
 }
 
-static void omap2_propagate_rate(struct clk * clk)
+/**
+ * omap2_wait_clock_ready - wait for clock to enable
+ * @reg: physical address of clock IDLEST register
+ * @mask: value to mask against to determine if the clock is active
+ * @name: name of the clock (for printk)
+ *
+ * Returns 1 if the clock enabled in time, or 0 if it failed to enable
+ * in roughly MAX_CLOCK_ENABLE_WAIT microseconds.
+ */
+int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name)
 {
-	if (!(clk->flags & RATE_FIXED))
-		clk->rate = clk->parent->rate;
+	int i = 0;
+	int ena = 0;
 
-	propagate_rate(clk);
-}
-
-static void omap2_set_osc_ck(int enable)
-{
-	if (enable)
-		PRCM_CLKSRC_CTRL &= ~(0x3 << 3);
-	else
-		PRCM_CLKSRC_CTRL |= 0x3 << 3;
-}
-
-/* Enable an APLL if off */
-static void omap2_clk_fixed_enable(struct clk *clk)
-{
-	u32 cval, i=0;
-
-	if (clk->enable_bit == 0xff)			/* Parent will do it */
-		return;
-
-	cval = CM_CLKEN_PLL;
-
-	if ((cval & (0x3 << clk->enable_bit)) == (0x3 << clk->enable_bit))
-		return;
-
-	cval &= ~(0x3 << clk->enable_bit);
-	cval |= (0x3 << clk->enable_bit);
-	CM_CLKEN_PLL = cval;
-
-	if (clk == &apll96_ck)
-		cval = (1 << 8);
-	else if (clk == &apll54_ck)
-		cval = (1 << 6);
-
-	while (!(CM_IDLEST_CKGEN & cval)) {		/* Wait for lock */
-		++i;
-		udelay(1);
-		if (i == 100000) {
-			printk(KERN_ERR "Clock %s didn't lock\n", clk->name);
-			break;
-		}
+	/*
+	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+	 * 34xx reverses this, just to keep us on our toes
+	 */
+	if (cpu_mask & (RATE_IN_242X | RATE_IN_243X)) {
+		ena = mask;
+	} else if (cpu_mask & RATE_IN_343X) {
+		ena = 0;
 	}
-}
 
+	/* Wait for lock */
+	while (((__raw_readl(reg) & mask) != ena) &&
+	       (i++ < MAX_CLOCK_ENABLE_WAIT)) {
+		udelay(1);
+	}
+
+	if (i < MAX_CLOCK_ENABLE_WAIT)
+		pr_debug("Clock %s stable after %d loops\n", name, i);
+	else
+		printk(KERN_ERR "Clock %s didn't enable in %d tries\n",
+		       name, MAX_CLOCK_ENABLE_WAIT);
+
+
+	return (i < MAX_CLOCK_ENABLE_WAIT) ? 1 : 0;
+};
+
+
+/*
+ * Note: We don't need special code here for INVERT_ENABLE
+ * for the time being since INVERT_ENABLE only applies to clocks enabled by
+ * CM_CLKEN_PLL
+ */
 static void omap2_clk_wait_ready(struct clk *clk)
 {
-	unsigned long reg, other_reg, st_reg;
+	void __iomem *reg, *other_reg, *st_reg;
 	u32 bit;
-	int i;
 
-	reg = (unsigned long) clk->enable_reg;
-	if (reg == (unsigned long) &CM_FCLKEN1_CORE ||
-	    reg == (unsigned long) &CM_FCLKEN2_CORE)
-		other_reg = (reg & ~0xf0) | 0x10;
-	else if (reg == (unsigned long) &CM_ICLKEN1_CORE ||
-		 reg == (unsigned long) &CM_ICLKEN2_CORE)
-		other_reg = (reg & ~0xf0) | 0x00;
+	/*
+	 * REVISIT: This code is pretty ugly.  It would be nice to generalize
+	 * it and pull it into struct clk itself somehow.
+	 */
+	reg = clk->enable_reg;
+	if ((((u32)reg & 0xff) >= CM_FCLKEN1) &&
+	    (((u32)reg & 0xff) <= OMAP24XX_CM_FCLKEN2))
+		other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x10); /* CM_ICLKEN* */
+	else if ((((u32)reg & 0xff) >= CM_ICLKEN1) &&
+		 (((u32)reg & 0xff) <= OMAP24XX_CM_ICLKEN4))
+		other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x00); /* CM_FCLKEN* */
 	else
 		return;
 
+	/* REVISIT: What are the appropriate exclusions for 34XX? */
 	/* No check for DSS or cam clocks */
-	if ((reg & 0x0f) == 0) {
-		if (clk->enable_bit <= 1 || clk->enable_bit == 31)
+	if (cpu_is_omap24xx() && ((u32)reg & 0x0f) == 0) { /* CM_{F,I}CLKEN1 */
+		if (clk->enable_bit == OMAP24XX_EN_DSS2_SHIFT ||
+		    clk->enable_bit == OMAP24XX_EN_DSS1_SHIFT ||
+		    clk->enable_bit == OMAP24XX_EN_CAM_SHIFT)
 			return;
 	}
 
+	/* REVISIT: What are the appropriate exclusions for 34XX? */
+	/* OMAP3: ignore DSS-mod clocks */
+	if (cpu_is_omap34xx() &&
+	    (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0)))
+		return;
+
 	/* Check if both functional and interface clocks
 	 * are running. */
 	bit = 1 << clk->enable_bit;
 	if (!(__raw_readl(other_reg) & bit))
 		return;
-	st_reg = (other_reg & ~0xf0) | 0x20;
-	i = 0;
-	while (!(__raw_readl(st_reg) & bit)) {
-		i++;
-		if (i == 100000) {
-			printk(KERN_ERR "Timeout enabling clock %s\n", clk->name);
-			break;
-		}
-	}
-	if (i)
-		pr_debug("Clock %s stable after %d loops\n", clk->name, i);
+	st_reg = (void __iomem *)(((u32)other_reg & ~0xf0) | 0x20); /* CM_IDLEST* */
+
+	omap2_wait_clock_ready(st_reg, bit, clk->name);
 }
 
 /* Enables clock without considering parent dependencies or use count
  * REVISIT: Maybe change this to use clk->enable like on omap1?
  */
-static int _omap2_clk_enable(struct clk * clk)
+int _omap2_clk_enable(struct clk *clk)
 {
 	u32 regval32;
 
-	if (clk->flags & ALWAYS_ENABLED)
+	if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK))
 		return 0;
 
-	if (unlikely(clk == &osc_ck)) {
-		omap2_set_osc_ck(1);
-		return 0;
-	}
+	if (clk->enable)
+		return clk->enable(clk);
 
 	if (unlikely(clk->enable_reg == 0)) {
 		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
 		       clk->name);
-		return 0;
-	}
-
-	if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) {
-		omap2_clk_fixed_enable(clk);
-		return 0;
+		return 0; /* REVISIT: -EINVAL */
 	}
 
 	regval32 = __raw_readl(clk->enable_reg);
-	regval32 |= (1 << clk->enable_bit);
+	if (clk->flags & INVERT_ENABLE)
+		regval32 &= ~(1 << clk->enable_bit);
+	else
+		regval32 |= (1 << clk->enable_bit);
 	__raw_writel(regval32, clk->enable_reg);
 	wmb();
 
@@ -200,44 +250,48 @@
 	return 0;
 }
 
-/* Stop APLL */
-static void omap2_clk_fixed_disable(struct clk *clk)
-{
-	u32 cval;
-
-	if(clk->enable_bit == 0xff)		/* let parent off do it */
-		return;
-
-	cval = CM_CLKEN_PLL;
-	cval &= ~(0x3 << clk->enable_bit);
-	CM_CLKEN_PLL = cval;
-}
-
 /* Disables clock without considering parent dependencies or use count */
-static void _omap2_clk_disable(struct clk *clk)
+void _omap2_clk_disable(struct clk *clk)
 {
 	u32 regval32;
 
-	if (unlikely(clk == &osc_ck)) {
-		omap2_set_osc_ck(0);
+	if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK))
+		return;
+
+	if (clk->disable) {
+		clk->disable(clk);
 		return;
 	}
 
-	if (clk->enable_reg == 0)
-		return;
-
-	if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) {
-		omap2_clk_fixed_disable(clk);
+	if (clk->enable_reg == 0) {
+		/*
+		 * 'Independent' here refers to a clock which is not
+		 * controlled by its parent.
+		 */
+		printk(KERN_ERR "clock: clk_disable called on independent "
+		       "clock %s which has no enable_reg\n", clk->name);
 		return;
 	}
 
 	regval32 = __raw_readl(clk->enable_reg);
-	regval32 &= ~(1 << clk->enable_bit);
+	if (clk->flags & INVERT_ENABLE)
+		regval32 |= (1 << clk->enable_bit);
+	else
+		regval32 &= ~(1 << clk->enable_bit);
 	__raw_writel(regval32, clk->enable_reg);
 	wmb();
 }
 
-static int omap2_clk_enable(struct clk *clk)
+void omap2_clk_disable(struct clk *clk)
+{
+	if (clk->usecount > 0 && !(--clk->usecount)) {
+		_omap2_clk_disable(clk);
+		if (likely((u32)clk->parent))
+			omap2_clk_disable(clk->parent);
+	}
+}
+
+int omap2_clk_enable(struct clk *clk)
 {
 	int ret = 0;
 
@@ -261,519 +315,314 @@
 	return ret;
 }
 
-static void omap2_clk_disable(struct clk *clk)
-{
-	if (clk->usecount > 0 && !(--clk->usecount)) {
-		_omap2_clk_disable(clk);
-		if (likely((u32)clk->parent))
-			omap2_clk_disable(clk->parent);
-	}
-}
-
-/*
- * Uses the current prcm set to tell if a rate is valid.
- * You can go slower, but not faster within a given rate set.
- */
-static u32 omap2_dpll_round_rate(unsigned long target_rate)
-{
-	u32 high, low;
-
-	if ((CM_CLKSEL2_PLL & 0x3) == 1) {	/* DPLL clockout */
-		high = curr_prcm_set->dpll_speed * 2;
-		low = curr_prcm_set->dpll_speed;
-	} else {				/* DPLL clockout x 2 */
-		high = curr_prcm_set->dpll_speed;
-		low = curr_prcm_set->dpll_speed / 2;
-	}
-
-#ifdef DOWN_VARIABLE_DPLL
-	if (target_rate > high)
-		return high;
-	else
-		return target_rate;
-#else
-	if (target_rate > low)
-		return high;
-	else
-		return low;
-#endif
-
-}
-
 /*
  * Used for clocks that are part of CLKSEL_xyz governed clocks.
  * REVISIT: Maybe change to use clk->enable() functions like on omap1?
  */
-static void omap2_clksel_recalc(struct clk * clk)
+void omap2_clksel_recalc(struct clk *clk)
 {
-	u32 fixed = 0, div = 0;
+	u32 div = 0;
 
-	if (clk == &dpll_ck) {
-		clk->rate = omap2_get_dpll_rate(clk);
-		fixed = 1;
-		div = 0;
-	}
+	pr_debug("clock: recalc'ing clksel clk %s\n", clk->name);
 
-	if (clk == &iva1_mpu_int_ifck) {
-		div = 2;
-		fixed = 1;
-	}
-
-	if ((clk == &dss1_fck) && ((CM_CLKSEL1_CORE & (0x1f << 8)) == 0)) {
-		clk->rate = sys_ck.rate;
+	div = omap2_clksel_get_divisor(clk);
+	if (div == 0)
 		return;
-	}
 
-	if (!fixed) {
-		div = omap2_clksel_get_divisor(clk);
-		if (div == 0)
-			return;
-	}
+	if (unlikely(clk->rate == clk->parent->rate / div))
+		return;
+	clk->rate = clk->parent->rate / div;
 
-	if (div != 0) {
-		if (unlikely(clk->rate == clk->parent->rate / div))
-			return;
-		clk->rate = clk->parent->rate / div;
-	}
+	pr_debug("clock: new clock rate is %ld (div %d)\n", clk->rate, div);
 
 	if (unlikely(clk->flags & RATE_PROPAGATES))
 		propagate_rate(clk);
 }
 
-/*
- * Finds best divider value in an array based on the source and target
- * rates. The divider array must be sorted with smallest divider first.
+/**
+ * omap2_get_clksel_by_parent - return clksel struct for a given clk & parent
+ * @clk: OMAP struct clk ptr to inspect
+ * @src_clk: OMAP struct clk ptr of the parent clk to search for
+ *
+ * Scan the struct clksel array associated with the clock to find
+ * the element associated with the supplied parent clock address.
+ * Returns a pointer to the struct clksel on success or NULL on error.
  */
-static inline u32 omap2_divider_from_table(u32 size, u32 *div_array,
-					   u32 src_rate, u32 tgt_rate)
+const struct clksel *omap2_get_clksel_by_parent(struct clk *clk,
+						struct clk *src_clk)
 {
-	int i, test_rate;
+	const struct clksel *clks;
 
-	if (div_array == NULL)
-		return ~1;
+	if (!clk->clksel)
+		return NULL;
 
-	for (i=0; i < size; i++) {
-		test_rate = src_rate / *div_array;
-		if (test_rate <= tgt_rate)
-			return *div_array;
-		++div_array;
+	for (clks = clk->clksel; clks->parent; clks++) {
+		if (clks->parent == src_clk)
+			break; /* Found the requested parent */
 	}
 
-	return ~0;	/* No acceptable divider */
+	if (!clks->parent) {
+		printk(KERN_ERR "clock: Could not find parent clock %s in "
+		       "clksel array of clock %s\n", src_clk->name,
+		       clk->name);
+		return NULL;
+	}
+
+	return clks;
 }
 
-/*
- * Find divisor for the given clock and target rate.
+/**
+ * omap2_clksel_round_rate_div - find divisor for the given clock and rate
+ * @clk: OMAP struct clk to use
+ * @target_rate: desired clock rate
+ * @new_div: ptr to where we should store the divisor
  *
+ * Finds 'best' divider value in an array based on the source and target
+ * rates.  The divider array must be sorted with smallest divider first.
  * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
  * they are only settable as part of virtual_prcm set.
+ *
+ * Returns the rounded clock rate or returns 0xffffffff on error.
  */
-static u32 omap2_clksel_round_rate(struct clk *tclk, u32 target_rate,
-	u32 *new_div)
+u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
+				u32 *new_div)
 {
-	u32 gfx_div[] = {2, 3, 4};
-	u32 sysclkout_div[] = {1, 2, 4, 8, 16};
-	u32 dss1_div[] = {1, 2, 3, 4, 5, 6, 8, 9, 12, 16};
-	u32 vylnq_div[] = {1, 2, 3, 4, 6, 8, 9, 12, 16, 18};
-	u32 best_div = ~0, asize = 0;
-	u32 *div_array = NULL;
+	unsigned long test_rate;
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
+	u32 last_div = 0;
 
-	switch (tclk->flags & SRC_RATE_SEL_MASK) {
-	case CM_GFX_SEL1:
-		asize = 3;
-		div_array = gfx_div;
-		break;
-	case CM_PLL_SEL1:
-		return omap2_dpll_round_rate(target_rate);
-	case CM_SYSCLKOUT_SEL1:
-		asize = 5;
-		div_array = sysclkout_div;
-		break;
-	case CM_CORE_SEL1:
-		if(tclk == &dss1_fck){
-			if(tclk->parent == &core_ck){
-				asize = 10;
-				div_array = dss1_div;
-			} else {
-				*new_div = 0; /* fixed clk */
-				return(tclk->parent->rate);
-			}
-		} else if((tclk == &vlynq_fck) && cpu_is_omap2420()){
-			if(tclk->parent == &core_ck){
-				asize = 10;
-				div_array = vylnq_div;
-			} else {
-				*new_div = 0; /* fixed clk */
-				return(tclk->parent->rate);
-			}
-		}
-		break;
+	printk(KERN_INFO "clock: clksel_round_rate_div: %s target_rate %ld\n",
+	       clk->name, target_rate);
+
+	*new_div = 1;
+
+	clks = omap2_get_clksel_by_parent(clk, clk->parent);
+	if (clks == NULL)
+		return ~0;
+
+	for (clkr = clks->rates; clkr->div; clkr++) {
+		if (!(clkr->flags & cpu_mask))
+		    continue;
+
+		/* Sanity check */
+		if (clkr->div <= last_div)
+			printk(KERN_ERR "clock: clksel_rate table not sorted "
+			       "for clock %s", clk->name);
+
+		last_div = clkr->div;
+
+		test_rate = clk->parent->rate / clkr->div;
+
+		if (test_rate <= target_rate)
+			break; /* found it */
 	}
 
-	best_div = omap2_divider_from_table(asize, div_array,
-	 tclk->parent->rate, target_rate);
-	if (best_div == ~0){
-		*new_div = 1;
-		return best_div; /* signal error */
+	if (!clkr->div) {
+		printk(KERN_ERR "clock: Could not find divisor for target "
+		       "rate %ld for clock %s parent %s\n", target_rate,
+		       clk->name, clk->parent->name);
+		return ~0;
 	}
 
-	*new_div = best_div;
-	return (tclk->parent->rate / best_div);
+	*new_div = clkr->div;
+
+	printk(KERN_INFO "clock: new_div = %d, new_rate = %ld\n", *new_div,
+	       (clk->parent->rate / clkr->div));
+
+	return (clk->parent->rate / clkr->div);
 }
 
-/* Given a clock and a rate apply a clock specific rounding function */
-static long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
+/**
+ * omap2_clksel_round_rate - find rounded rate for the given clock and rate
+ * @clk: OMAP struct clk to use
+ * @target_rate: desired clock rate
+ *
+ * Compatibility wrapper for OMAP clock framework
+ * Finds best target rate based on the source clock and possible dividers.
+ * rates. The divider array must be sorted with smallest divider first.
+ * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
+ * they are only settable as part of virtual_prcm set.
+ *
+ * Returns the rounded clock rate or returns 0xffffffff on error.
+ */
+long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
 {
-	u32 new_div = 0;
-	int valid_rate;
+	u32 new_div;
 
-	if (clk->flags & RATE_FIXED)
-		return clk->rate;
+	return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
+}
 
-	if (clk->flags & RATE_CKCTL) {
-		valid_rate = omap2_clksel_round_rate(clk, rate, &new_div);
-		return valid_rate;
-	}
 
+/* Given a clock and a rate apply a clock specific rounding function */
+long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
+{
 	if (clk->round_rate != 0)
 		return clk->round_rate(clk, rate);
 
+	if (clk->flags & RATE_FIXED)
+		printk(KERN_ERR "clock: generic omap2_clk_round_rate called "
+		       "on fixed-rate clock %s\n", clk->name);
+
 	return clk->rate;
 }
 
-/*
- * Check the DLL lock state, and return tue if running in unlock mode.
- * This is needed to compensate for the shifted DLL value in unlock mode.
- */
-static u32 omap2_dll_force_needed(void)
-{
-	u32 dll_state = SDRC_DLLA_CTRL;		/* dlla and dllb are a set */
-
-	if ((dll_state & (1 << 2)) == (1 << 2))
-		return 1;
-	else
-		return 0;
-}
-
-static u32 omap2_reprogram_sdrc(u32 level, u32 force)
-{
-	u32 slow_dll_ctrl, fast_dll_ctrl, m_type;
-	u32 prev = curr_perf_level, flags;
-
-	if ((curr_perf_level == level) && !force)
-		return prev;
-
-	m_type = omap2_memory_get_type();
-	slow_dll_ctrl = omap2_memory_get_slow_dll_ctrl();
-	fast_dll_ctrl = omap2_memory_get_fast_dll_ctrl();
-
-	if (level == PRCM_HALF_SPEED) {
-		local_irq_save(flags);
-		PRCM_VOLTSETUP = 0xffff;
-		omap2_sram_reprogram_sdrc(PRCM_HALF_SPEED,
-					  slow_dll_ctrl, m_type);
-		curr_perf_level = PRCM_HALF_SPEED;
-		local_irq_restore(flags);
-	}
-	if (level == PRCM_FULL_SPEED) {
-		local_irq_save(flags);
-		PRCM_VOLTSETUP = 0xffff;
-		omap2_sram_reprogram_sdrc(PRCM_FULL_SPEED,
-					  fast_dll_ctrl, m_type);
-		curr_perf_level = PRCM_FULL_SPEED;
-		local_irq_restore(flags);
-	}
-
-	return prev;
-}
-
-static int omap2_reprogram_dpll(struct clk * clk, unsigned long rate)
-{
-	u32 flags, cur_rate, low, mult, div, valid_rate, done_rate;
-	u32 bypass = 0;
-	struct prcm_config tmpset;
-	int ret = -EINVAL;
-
-	local_irq_save(flags);
-	cur_rate = omap2_get_dpll_rate(&dpll_ck);
-	mult = CM_CLKSEL2_PLL & 0x3;
-
-	if ((rate == (cur_rate / 2)) && (mult == 2)) {
-		omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1);
-	} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
-		omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
-	} else if (rate != cur_rate) {
-		valid_rate = omap2_dpll_round_rate(rate);
-		if (valid_rate != rate)
-			goto dpll_exit;
-
-		if ((CM_CLKSEL2_PLL & 0x3) == 1)
-			low = curr_prcm_set->dpll_speed;
-		else
-			low = curr_prcm_set->dpll_speed / 2;
-
-		tmpset.cm_clksel1_pll = CM_CLKSEL1_PLL;
-		tmpset.cm_clksel1_pll &= ~(0x3FFF << 8);
-		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
-		tmpset.cm_clksel2_pll = CM_CLKSEL2_PLL;
-		tmpset.cm_clksel2_pll &= ~0x3;
-		if (rate > low) {
-			tmpset.cm_clksel2_pll |= 0x2;
-			mult = ((rate / 2) / 1000000);
-			done_rate = PRCM_FULL_SPEED;
-		} else {
-			tmpset.cm_clksel2_pll |= 0x1;
-			mult = (rate / 1000000);
-			done_rate = PRCM_HALF_SPEED;
-		}
-		tmpset.cm_clksel1_pll |= ((div << 8) | (mult << 12));
-
-		/* Worst case */
-		tmpset.base_sdrc_rfr = V24XX_SDRC_RFR_CTRL_BYPASS;
-
-		if (rate == curr_prcm_set->xtal_speed)	/* If asking for 1-1 */
-			bypass = 1;
-
-		omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); /* For init_mem */
-
-		/* Force dll lock mode */
-		omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
-			       bypass);
-
-		/* Errata: ret dll entry state */
-		omap2_init_memory_params(omap2_dll_force_needed());
-		omap2_reprogram_sdrc(done_rate, 0);
-	}
-	omap2_clksel_recalc(&dpll_ck);
-	ret = 0;
-
-dpll_exit:
-	local_irq_restore(flags);
-	return(ret);
-}
-
-/* Just return the MPU speed */
-static void omap2_mpu_recalc(struct clk * clk)
-{
-	clk->rate = curr_prcm_set->mpu_speed;
-}
-
-/*
- * Look for a rate equal or less than the target rate given a configuration set.
+/**
+ * omap2_clksel_to_divisor() - turn clksel field value into integer divider
+ * @clk: OMAP struct clk to use
+ * @field_val: register field value to find
  *
- * What's not entirely clear is "which" field represents the key field.
- * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
- * just uses the ARM rates.
+ * Given a struct clk of a rate-selectable clksel clock, and a register field
+ * value to search for, find the corresponding clock divisor.  The register
+ * field value should be pre-masked and shifted down so the LSB is at bit 0
+ * before calling.  Returns 0 on error
  */
-static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate)
+u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val)
 {
-	struct prcm_config * ptr;
-	long highest_rate;
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
 
-	if (clk != &virt_prcm_set)
-		return -EINVAL;
+	clks = omap2_get_clksel_by_parent(clk, clk->parent);
+	if (clks == NULL)
+		return 0;
 
-	highest_rate = -EINVAL;
-
-	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
-		if (ptr->xtal_speed != sys_ck.rate)
-			continue;
-
-		highest_rate = ptr->mpu_speed;
-
-		/* Can check only after xtal frequency check */
-		if (ptr->mpu_speed <= rate)
+	for (clkr = clks->rates; clkr->div; clkr++) {
+		if ((clkr->flags & cpu_mask) && (clkr->val == field_val))
 			break;
 	}
-	return highest_rate;
-}
 
-/*
- * omap2_convert_field_to_div() - turn field value into integer divider
- */
-static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val)
-{
-	u32 i;
-	u32 clkout_array[] = {1, 2, 4, 8, 16};
-
-	if ((div_sel & SRC_RATE_SEL_MASK) == CM_SYSCLKOUT_SEL1) {
-		for (i = 0; i < 5; i++) {
-			if (field_val == i)
-				return clkout_array[i];
-		}
-		return ~0;
-	} else
-		return field_val;
-}
-
-/*
- * Returns the CLKSEL divider register value
- * REVISIT: This should be cleaned up to work nicely with void __iomem *
- */
-static u32 omap2_get_clksel(u32 *div_sel, u32 *field_mask,
-			    struct clk *clk)
-{
-	int ret = ~0;
-	u32 reg_val, div_off;
-	u32 div_addr = 0;
-	u32 mask = ~0;
-
-	div_off = clk->rate_offset;
-
-	switch ((*div_sel & SRC_RATE_SEL_MASK)) {
-	case CM_MPU_SEL1:
-		div_addr = (u32)&CM_CLKSEL_MPU;
-		mask = 0x1f;
-		break;
-	case CM_DSP_SEL1:
-		div_addr = (u32)&CM_CLKSEL_DSP;
-		if (cpu_is_omap2420()) {
-			if ((div_off == 0) || (div_off == 8))
-				mask = 0x1f;
-			else if (div_off == 5)
-				mask = 0x3;
-		} else if (cpu_is_omap2430()) {
-			if (div_off == 0)
-				mask = 0x1f;
-			else if (div_off == 5)
-				mask = 0x3;
-		}
-		break;
-	case CM_GFX_SEL1:
-		div_addr = (u32)&CM_CLKSEL_GFX;
-		if (div_off == 0)
-			mask = 0x7;
-		break;
-	case CM_MODEM_SEL1:
-		div_addr = (u32)&CM_CLKSEL_MDM;
-		if (div_off == 0)
-			mask = 0xf;
-		break;
-	case CM_SYSCLKOUT_SEL1:
-		div_addr = (u32)&PRCM_CLKOUT_CTRL;
-		if ((div_off == 3) || (div_off == 11))
-			mask= 0x3;
-		break;
-	case CM_CORE_SEL1:
-		div_addr = (u32)&CM_CLKSEL1_CORE;
-		switch (div_off) {
-		case 0:					/* l3 */
-		case 8:					/* dss1 */
-		case 15:				/* vylnc-2420 */
-		case 20:				/* ssi */
-			mask = 0x1f; break;
-		case 5:					/* l4 */
-			mask = 0x3; break;
-		case 13:				/* dss2 */
-			mask = 0x1; break;
-		case 25:				/* usb */
-			mask = 0x7; break;
-		}
+	if (!clkr->div) {
+		printk(KERN_ERR "clock: Could not find fieldval %d for "
+		       "clock %s parent %s\n", field_val, clk->name,
+		       clk->parent->name);
+		return 0;
 	}
 
-	*field_mask = mask;
-
-	if (unlikely(mask == ~0))
-		div_addr = 0;
-
-	*div_sel = div_addr;
-
-	if (unlikely(div_addr == 0))
-		return ret;
-
-	/* Isolate field */
-	reg_val = __raw_readl((void __iomem *)div_addr) & (mask << div_off);
-
-	/* Normalize back to divider value */
-	reg_val >>= div_off;
-
-	return reg_val;
+	return clkr->div;
 }
 
-/*
- * Return divider to be applied to parent clock.
- * Return 0 on error.
+/**
+ * omap2_divisor_to_clksel() - turn clksel integer divisor into a field value
+ * @clk: OMAP struct clk to use
+ * @div: integer divisor to search for
+ *
+ * Given a struct clk of a rate-selectable clksel clock, and a clock divisor,
+ * find the corresponding register field value.  The return register value is
+ * the value before left-shifting.  Returns 0xffffffff on error
  */
-static u32 omap2_clksel_get_divisor(struct clk *clk)
+u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
 {
-	int ret = 0;
-	u32 div, div_sel, div_off, field_mask, field_val;
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
 
-	/* isolate control register */
-	div_sel = (SRC_RATE_SEL_MASK & clk->flags);
+	/* should never happen */
+	WARN_ON(div == 0);
 
-	div_off = clk->rate_offset;
-	field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
-	if (div_sel == 0)
-		return ret;
+	clks = omap2_get_clksel_by_parent(clk, clk->parent);
+	if (clks == NULL)
+		return 0;
 
-	div_sel = (SRC_RATE_SEL_MASK & clk->flags);
-	div = omap2_clksel_to_divisor(div_sel, field_val);
+	for (clkr = clks->rates; clkr->div; clkr++) {
+		if ((clkr->flags & cpu_mask) && (clkr->div == div))
+			break;
+	}
 
-	return div;
+	if (!clkr->div) {
+		printk(KERN_ERR "clock: Could not find divisor %d for "
+		       "clock %s parent %s\n", div, clk->name,
+		       clk->parent->name);
+		return 0;
+	}
+
+	return clkr->val;
 }
 
+/**
+ * omap2_get_clksel - find clksel register addr & field mask for a clk
+ * @clk: struct clk to use
+ * @field_mask: ptr to u32 to store the register field mask
+ *
+ * Returns the address of the clksel register upon success or NULL on error.
+ */
+void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask)
+{
+	if (unlikely((clk->clksel_reg == 0) || (clk->clksel_mask == 0)))
+		return NULL;
+
+	*field_mask = clk->clksel_mask;
+
+	return clk->clksel_reg;
+}
+
+/**
+ * omap2_clksel_get_divisor - get current divider applied to parent clock.
+ * @clk: OMAP struct clk to use.
+ *
+ * Returns the integer divisor upon success or 0 on error.
+ */
+u32 omap2_clksel_get_divisor(struct clk *clk)
+{
+	u32 field_mask, field_val;
+	void __iomem *div_addr;
+
+	div_addr = omap2_get_clksel(clk, &field_mask);
+	if (div_addr == 0)
+		return 0;
+
+	field_val = __raw_readl(div_addr) & field_mask;
+	field_val >>= __ffs(field_mask);
+
+	return omap2_clksel_to_divisor(clk, field_val);
+}
+
+int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 field_mask, field_val, reg_val, validrate, new_div = 0;
+	void __iomem *div_addr;
+
+	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+	if (validrate != rate)
+		return -EINVAL;
+
+	div_addr = omap2_get_clksel(clk, &field_mask);
+	if (div_addr == 0)
+		return -EINVAL;
+
+	field_val = omap2_divisor_to_clksel(clk, new_div);
+	if (field_val == ~0)
+		return -EINVAL;
+
+	reg_val = __raw_readl(div_addr);
+	reg_val &= ~field_mask;
+	reg_val |= (field_val << __ffs(field_mask));
+	__raw_writel(reg_val, div_addr);
+	wmb();
+
+	clk->rate = clk->parent->rate / new_div;
+
+	if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
+		__raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL);
+		wmb();
+	}
+
+	return 0;
+}
+
+
 /* Set the clock rate for a clock source */
-static int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
-
+int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 {
 	int ret = -EINVAL;
-	void __iomem * reg;
-	u32 div_sel, div_off, field_mask, field_val, reg_val, validrate;
-	u32 new_div = 0;
 
-	if (!(clk->flags & CONFIG_PARTICIPANT) && (clk->flags & RATE_CKCTL)) {
-		if (clk == &dpll_ck)
-			return omap2_reprogram_dpll(clk, rate);
+	pr_debug("clock: set_rate for clock %s to rate %ld\n", clk->name, rate);
 
-		/* Isolate control register */
-		div_sel = (SRC_RATE_SEL_MASK & clk->flags);
-		div_off = clk->rate_offset;
+	/* CONFIG_PARTICIPANT clocks are changed only in sets via the
+	   rate table mechanism, driven by mpu_speed  */
+	if (clk->flags & CONFIG_PARTICIPANT)
+		return -EINVAL;
 
-		validrate = omap2_clksel_round_rate(clk, rate, &new_div);
-		if (validrate != rate)
-			return(ret);
-
-		field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
-		if (div_sel == 0)
-			return ret;
-
-		if (clk->flags & CM_SYSCLKOUT_SEL1) {
-			switch (new_div) {
-			case 16:
-				field_val = 4;
-				break;
-			case 8:
-				field_val = 3;
-				break;
-			case 4:
-				field_val = 2;
-				break;
-			case 2:
-				field_val = 1;
-				break;
-			case 1:
-				field_val = 0;
-				break;
-			}
-		} else
-			field_val = new_div;
-
-		reg = (void __iomem *)div_sel;
-
-		reg_val = __raw_readl(reg);
-		reg_val &= ~(field_mask << div_off);
-		reg_val |= (field_val << div_off);
-		__raw_writel(reg_val, reg);
-		wmb();
-		clk->rate = clk->parent->rate / field_val;
-
-		if (clk->flags & DELAYED_APP) {
-			__raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
-			wmb();
-		}
-		ret = 0;
-	} else if (clk->set_rate != 0)
+	/* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */
+	if (clk->set_rate != 0)
 		ret = clk->set_rate(clk, rate);
 
 	if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
@@ -782,242 +631,92 @@
 	return ret;
 }
 
-/* Converts encoded control register address into a full address */
-static u32 omap2_get_src_field(u32 *type_to_addr, u32 reg_offset,
-			       struct clk *src_clk, u32 *field_mask)
+/*
+ * Converts encoded control register address into a full address
+ * On error, *src_addr will be returned as 0.
+ */
+static u32 omap2_clksel_get_src_field(void __iomem **src_addr,
+				      struct clk *src_clk, u32 *field_mask,
+				      struct clk *clk, u32 *parent_div)
 {
-	u32 val = ~0, src_reg_addr = 0, mask = 0;
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
 
-	/* Find target control register.*/
-	switch ((*type_to_addr & SRC_RATE_SEL_MASK)) {
-	case CM_CORE_SEL1:
-		src_reg_addr = (u32)&CM_CLKSEL1_CORE;
-		if (reg_offset == 13) {			/* DSS2_fclk */
-			mask = 0x1;
-			if (src_clk == &sys_ck)
-				val = 0;
-			if (src_clk == &func_48m_ck)
-				val = 1;
-		} else if (reg_offset == 8) {		/* DSS1_fclk */
-			mask = 0x1f;
-			if (src_clk == &sys_ck)
-				val = 0;
-			else if (src_clk == &core_ck)	/* divided clock */
-				val = 0x10;		/* rate needs fixing */
-		} else if ((reg_offset == 15) && cpu_is_omap2420()){ /*vlnyq*/
-			mask = 0x1F;
-			if(src_clk == &func_96m_ck)
-				val = 0;
-			else if (src_clk == &core_ck)
-				val = 0x10;
-		}
-		break;
-	case CM_CORE_SEL2:
-		src_reg_addr = (u32)&CM_CLKSEL2_CORE;
-		mask = 0x3;
-		if (src_clk == &func_32k_ck)
-			val = 0x0;
-		if (src_clk == &sys_ck)
-			val = 0x1;
-		if (src_clk == &alt_ck)
-			val = 0x2;
-		break;
-	case CM_WKUP_SEL1:
-		src_reg_addr = (u32)&CM_CLKSEL_WKUP;
-		mask = 0x3;
-		if (src_clk == &func_32k_ck)
-			val = 0x0;
-		if (src_clk == &sys_ck)
-			val = 0x1;
-		if (src_clk == &alt_ck)
-			val = 0x2;
-		break;
-	case CM_PLL_SEL1:
-		src_reg_addr = (u32)&CM_CLKSEL1_PLL;
-		mask = 0x1;
-		if (reg_offset == 0x3) {
-			if (src_clk == &apll96_ck)
-				val = 0;
-			if (src_clk == &alt_ck)
-				val = 1;
-		}
-		else if (reg_offset == 0x5) {
-			if (src_clk == &apll54_ck)
-				val = 0;
-			if (src_clk == &alt_ck)
-				val = 1;
-		}
-		break;
-	case CM_PLL_SEL2:
-		src_reg_addr = (u32)&CM_CLKSEL2_PLL;
-		mask = 0x3;
-		if (src_clk == &func_32k_ck)
-			val = 0x0;
-		if (src_clk == &dpll_ck)
-			val = 0x2;
-		break;
-	case CM_SYSCLKOUT_SEL1:
-		src_reg_addr = (u32)&PRCM_CLKOUT_CTRL;
-		mask = 0x3;
-		if (src_clk == &dpll_ck)
-			val = 0;
-		if (src_clk == &sys_ck)
-			val = 1;
-		if (src_clk == &func_96m_ck)
-			val = 2;
-		if (src_clk == &func_54m_ck)
-			val = 3;
-		break;
+	*parent_div = 0;
+	*src_addr = 0;
+
+	clks = omap2_get_clksel_by_parent(clk, src_clk);
+	if (clks == NULL)
+		return 0;
+
+	for (clkr = clks->rates; clkr->div; clkr++) {
+		if (clkr->flags & (cpu_mask | DEFAULT_RATE))
+			break; /* Found the default rate for this platform */
 	}
 
-	if (val == ~0)			/* Catch errors in offset */
-		*type_to_addr = 0;
-	else
-		*type_to_addr = src_reg_addr;
-	*field_mask = mask;
+	if (!clkr->div) {
+		printk(KERN_ERR "clock: Could not find default rate for "
+		       "clock %s parent %s\n", clk->name,
+		       src_clk->parent->name);
+		return 0;
+	}
 
-	return val;
+	/* Should never happen.  Add a clksel mask to the struct clk. */
+	WARN_ON(clk->clksel_mask == 0);
+
+	*field_mask = clk->clksel_mask;
+	*src_addr = clk->clksel_reg;
+	*parent_div = clkr->div;
+
+	return clkr->val;
 }
 
-static int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
+int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 {
-	void __iomem * reg;
-	u32 src_sel, src_off, field_val, field_mask, reg_val, rate;
-	int ret = -EINVAL;
+	void __iomem *src_addr;
+	u32 field_val, field_mask, reg_val, parent_div;
 
 	if (unlikely(clk->flags & CONFIG_PARTICIPANT))
-		return ret;
+		return -EINVAL;
 
-	if (clk->flags & SRC_SEL_MASK) {	/* On-chip SEL collection */
-		src_sel = (SRC_RATE_SEL_MASK & clk->flags);
-		src_off = clk->src_offset;
+	if (!clk->clksel)
+		return -EINVAL;
 
-		if (src_sel == 0)
-			goto set_parent_error;
+	field_val = omap2_clksel_get_src_field(&src_addr, new_parent,
+					       &field_mask, clk, &parent_div);
+	if (src_addr == 0)
+		return -EINVAL;
 
-		field_val = omap2_get_src_field(&src_sel, src_off, new_parent,
-						&field_mask);
+	if (clk->usecount > 0)
+		_omap2_clk_disable(clk);
 
-		reg = (void __iomem *)src_sel;
+	/* Set new source value (previous dividers if any in effect) */
+	reg_val = __raw_readl(src_addr) & ~field_mask;
+	reg_val |= (field_val << __ffs(field_mask));
+	__raw_writel(reg_val, src_addr);
+	wmb();
 
-		if (clk->usecount > 0)
-			_omap2_clk_disable(clk);
-
-		/* Set new source value (previous dividers if any in effect) */
-		reg_val = __raw_readl(reg) & ~(field_mask << src_off);
-		reg_val |= (field_val << src_off);
-		__raw_writel(reg_val, reg);
+	if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
+		__raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL);
 		wmb();
-
-		if (clk->flags & DELAYED_APP) {
-			__raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
-			wmb();
-		}
-		if (clk->usecount > 0)
-			_omap2_clk_enable(clk);
-
-		clk->parent = new_parent;
-
-		/* SRC_RATE_SEL_MASK clocks follow their parents rates.*/
-		if ((new_parent == &core_ck) && (clk == &dss1_fck))
-			clk->rate = new_parent->rate / 0x10;
-		else
-			clk->rate = new_parent->rate;
-
-		if (unlikely(clk->flags & RATE_PROPAGATES))
-			propagate_rate(clk);
-
-		return 0;
-	} else {
-		clk->parent = new_parent;
-		rate = new_parent->rate;
-		omap2_clk_set_rate(clk, rate);
-		ret = 0;
 	}
 
- set_parent_error:
-	return ret;
-}
+	if (clk->usecount > 0)
+		_omap2_clk_enable(clk);
 
-/* Sets basic clocks based on the specified rate */
-static int omap2_select_table_rate(struct clk * clk, unsigned long rate)
-{
-	u32 flags, cur_rate, done_rate, bypass = 0;
-	u8 cpu_mask = 0;
-	struct prcm_config *prcm;
-	unsigned long found_speed = 0;
+	clk->parent = new_parent;
 
-	if (clk != &virt_prcm_set)
-		return -EINVAL;
+	/* CLKSEL clocks follow their parents' rates, divided by a divisor */
+	clk->rate = new_parent->rate;
 
-	/* FIXME: Change cpu_is_omap2420() to cpu_is_omap242x() */
-	if (cpu_is_omap2420())
-		cpu_mask = RATE_IN_242X;
-	else if (cpu_is_omap2430())
-		cpu_mask = RATE_IN_243X;
+	if (parent_div > 0)
+		clk->rate /= parent_div;
 
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
+	pr_debug("clock: set parent of %s to %s (new rate %ld)\n",
+		 clk->name, clk->parent->name, clk->rate);
 
-		if (prcm->xtal_speed != sys_ck.rate)
-			continue;
-
-		if (prcm->mpu_speed <= rate) {
-			found_speed = prcm->mpu_speed;
-			break;
-		}
-	}
-
-	if (!found_speed) {
-		printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
-	 rate / 1000000);
-		return -EINVAL;
-	}
-
-	curr_prcm_set = prcm;
-	cur_rate = omap2_get_dpll_rate(&dpll_ck);
-
-	if (prcm->dpll_speed == cur_rate / 2) {
-		omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1);
-	} else if (prcm->dpll_speed == cur_rate * 2) {
-		omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
-	} else if (prcm->dpll_speed != cur_rate) {
-		local_irq_save(flags);
-
-		if (prcm->dpll_speed == prcm->xtal_speed)
-			bypass = 1;
-
-		if ((prcm->cm_clksel2_pll & 0x3) == 2)
-			done_rate = PRCM_FULL_SPEED;
-		else
-			done_rate = PRCM_HALF_SPEED;
-
-		/* MPU divider */
-		CM_CLKSEL_MPU = prcm->cm_clksel_mpu;
-
-		/* dsp + iva1 div(2420), iva2.1(2430) */
-		CM_CLKSEL_DSP = prcm->cm_clksel_dsp;
-
-		CM_CLKSEL_GFX = prcm->cm_clksel_gfx;
-
-		/* Major subsystem dividers */
-		CM_CLKSEL1_CORE = prcm->cm_clksel1_core;
-		if (cpu_is_omap2430())
-			CM_CLKSEL_MDM = prcm->cm_clksel_mdm;
-
-		/* x2 to enter init_mem */
-		omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
-
-		omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
-			       bypass);
-
-		omap2_init_memory_params(omap2_dll_force_needed());
-		omap2_reprogram_sdrc(done_rate, 0);
-
-		local_irq_restore(flags);
-	}
-	omap2_clksel_recalc(&dpll_ck);
+	if (unlikely(clk->flags & RATE_PROPAGATES))
+		propagate_rate(clk);
 
 	return 0;
 }
@@ -1027,150 +726,17 @@
  *-------------------------------------------------------------------------*/
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
-static void __init omap2_clk_disable_unused(struct clk *clk)
+void omap2_clk_disable_unused(struct clk *clk)
 {
-	u32 regval32;
+	u32 regval32, v;
+
+	v = (clk->flags & INVERT_ENABLE) ? (1 << clk->enable_bit) : 0;
 
 	regval32 = __raw_readl(clk->enable_reg);
-	if ((regval32 & (1 << clk->enable_bit)) == 0)
+	if ((regval32 & (1 << clk->enable_bit)) == v)
 		return;
 
 	printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
 	_omap2_clk_disable(clk);
 }
-#else
-#define omap2_clk_disable_unused	NULL
 #endif
-
-static struct clk_functions omap2_clk_functions = {
-	.clk_enable		= omap2_clk_enable,
-	.clk_disable		= omap2_clk_disable,
-	.clk_round_rate		= omap2_clk_round_rate,
-	.clk_set_rate		= omap2_clk_set_rate,
-	.clk_set_parent		= omap2_clk_set_parent,
-	.clk_disable_unused	= omap2_clk_disable_unused,
-};
-
-static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys)
-{
-	u32 div, aplls, sclk = 13000000;
-
-	aplls = CM_CLKSEL1_PLL;
-	aplls &= ((1 << 23) | (1 << 24) | (1 << 25));
-	aplls >>= 23;			/* Isolate field, 0,2,3 */
-
-	if (aplls == 0)
-		sclk = 19200000;
-	else if (aplls == 2)
-		sclk = 13000000;
-	else if (aplls == 3)
-		sclk = 12000000;
-
-	div = PRCM_CLKSRC_CTRL;
-	div &= ((1 << 7) | (1 << 6));
-	div >>= sys->rate_offset;
-
-	osc->rate = sclk * div;
-	sys->rate = sclk;
-}
-
-/*
- * Set clocks for bypass mode for reboot to work.
- */
-void omap2_clk_prepare_for_reboot(void)
-{
-	u32 rate;
-
-	if (vclk == NULL || sclk == NULL)
-		return;
-
-	rate = clk_get_rate(sclk);
-	clk_set_rate(vclk, rate);
-}
-
-/*
- * Switch the MPU rate if specified on cmdline.
- * We cannot do this early until cmdline is parsed.
- */
-static int __init omap2_clk_arch_init(void)
-{
-	if (!mpurate)
-		return -EINVAL;
-
-	if (omap2_select_table_rate(&virt_prcm_set, mpurate))
-		printk(KERN_ERR "Could not find matching MPU rate\n");
-
-	propagate_rate(&osc_ck);		/* update main root fast */
-	propagate_rate(&func_32k_ck);		/* update main root slow */
-
-	printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): "
-	       "%ld.%01ld/%ld/%ld MHz\n",
-	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
-	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
-
-	return 0;
-}
-arch_initcall(omap2_clk_arch_init);
-
-int __init omap2_clk_init(void)
-{
-	struct prcm_config *prcm;
-	struct clk ** clkp;
-	u32 clkrate;
-
-	clk_init(&omap2_clk_functions);
-	omap2_get_crystal_rate(&osc_ck, &sys_ck);
-
-	for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
-	     clkp++) {
-
-		if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) {
-			clk_register(*clkp);
-			continue;
-		}
-
-		if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) {
-			clk_register(*clkp);
-			continue;
-		}
-	}
-
-	/* Check the MPU rate set by bootloader */
-	clkrate = omap2_get_dpll_rate(&dpll_ck);
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (prcm->xtal_speed != sys_ck.rate)
-			continue;
-		if (prcm->dpll_speed <= clkrate)
-			 break;
-	}
-	curr_prcm_set = prcm;
-
-	propagate_rate(&osc_ck);		/* update main root fast */
-	propagate_rate(&func_32k_ck);		/* update main root slow */
-
-	printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
-	       "%ld.%01ld/%ld/%ld MHz\n",
-	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
-	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
-
-	/*
-	 * Only enable those clocks we will need, let the drivers
-	 * enable other clocks as necessary
-	 */
-	clk_enable(&sync_32k_ick);
-	clk_enable(&omapctrl_ick);
-
-	/* Force the APLLs always active. The clocks are idled
-	 * automatically by hardware. */
-	clk_enable(&apll96_ck);
-	clk_enable(&apll54_ck);
-
-	if (cpu_is_omap2430())
-		clk_enable(&sdrc_ick);
-
-	/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
-	vclk = clk_get(NULL, "virt_prcm_set");
-	sclk = clk_get(NULL, "sys_ck");
-
-	return 0;
-}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 4f79186..d5980a9 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -1,13 +1,12 @@
 /*
- *  linux/arch/arm/mach-omap24xx/clock.h
+ *  linux/arch/arm/mach-omap2/clock.h
  *
- *  Copyright (C) 2005 Texas Instruments Inc.
+ *  Copyright (C) 2005-2008 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2008 Nokia Corporation
+ *
+ *  Contacts:
  *  Richard Woodruff <r-woodruff2@ti.com>
- *  Created for OMAP2.
- *
- *  Copyright (C) 2004 Nokia corporation
- *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *  Paul Walmsley
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -17,2095 +16,53 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK_H
 
-static void omap2_sys_clk_recalc(struct clk * clk);
-static void omap2_clksel_recalc(struct clk * clk);
-static void omap2_followparent_recalc(struct clk * clk);
-static void omap2_propagate_rate(struct clk * clk);
-static void omap2_mpu_recalc(struct clk * clk);
-static int omap2_select_table_rate(struct clk * clk, unsigned long rate);
-static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate);
-static void omap2_clk_disable(struct clk *clk);
-static void omap2_sys_clk_recalc(struct clk * clk);
-static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val);
-static u32 omap2_clksel_get_divisor(struct clk *clk);
+#include <asm/arch/clock.h>
 
+int omap2_clk_enable(struct clk *clk);
+void omap2_clk_disable(struct clk *clk);
+long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
+int omap2_clk_set_rate(struct clk *clk, unsigned long rate);
+int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent);
 
-#define RATE_IN_242X	(1 << 0)
-#define RATE_IN_243X	(1 << 1)
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+void omap2_clk_disable_unused(struct clk *clk);
+#else
+#define omap2_clk_disable_unused	NULL
+#endif
 
-/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
- * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
- * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
- */
-struct prcm_config {
-	unsigned long xtal_speed;	/* crystal rate */
-	unsigned long dpll_speed;	/* dpll: out*xtal*M/(N-1)table_recalc */
-	unsigned long mpu_speed;	/* speed of MPU */
-	unsigned long cm_clksel_mpu;	/* mpu divider */
-	unsigned long cm_clksel_dsp;	/* dsp+iva1 div(2420), iva2.1(2430) */
-	unsigned long cm_clksel_gfx;	/* gfx dividers */
-	unsigned long cm_clksel1_core;	/* major subsystem dividers */
-	unsigned long cm_clksel1_pll;	/* m,n */
-	unsigned long cm_clksel2_pll;	/* dpllx1 or x2 out */
-	unsigned long cm_clksel_mdm;	/* modem dividers 2430 only */
-	unsigned long base_sdrc_rfr;	/* base refresh timing for a set */
-	unsigned char flags;
-};
+void omap2_clksel_recalc(struct clk *clk);
+void omap2_init_clksel_parent(struct clk *clk);
+u32 omap2_clksel_get_divisor(struct clk *clk);
+u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
+				u32 *new_div);
+u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val);
+u32 omap2_divisor_to_clksel(struct clk *clk, u32 div);
+void omap2_fixed_divisor_recalc(struct clk *clk);
+long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
+int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
+u32 omap2_get_dpll_rate(struct clk *clk);
+int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
 
-/* Mask for clksel which support parent settign in set_rate */
-#define SRC_SEL_MASK (CM_CORE_SEL1 | CM_CORE_SEL2 | CM_WKUP_SEL1 | \
-			CM_PLL_SEL1 | CM_PLL_SEL2 | CM_SYSCLKOUT_SEL1)
+extern u8 cpu_mask;
 
-/* Mask for clksel regs which support rate operations */
-#define SRC_RATE_SEL_MASK (CM_MPU_SEL1 | CM_DSP_SEL1 | CM_GFX_SEL1 | \
-			CM_MODEM_SEL1 | CM_CORE_SEL1 | CM_CORE_SEL2 | \
-			CM_WKUP_SEL1 | CM_PLL_SEL1 | CM_PLL_SEL2 | \
-			CM_SYSCLKOUT_SEL1)
-
-/*
- * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
- * These configurations are characterized by voltage and speed for clocks.
- * The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
- * respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
- *
- * 2430 differs from 2420 in that there are no more phase synchronizers used.
- * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
- * 2430 (iva2.1, NOdsp, mdm)
- */
-
-/* Core fields for cm_clksel, not ratio governed */
-#define RX_CLKSEL_DSS1			(0x10 << 8)
-#define RX_CLKSEL_DSS2			(0x0 << 13)
-#define RX_CLKSEL_SSI			(0x5 << 20)
-
-/*-------------------------------------------------------------------------
- * Voltage/DPLL ratios
- *-------------------------------------------------------------------------*/
-
-/* 2430 Ratio's, 2430-Ratio Config 1 */
-#define R1_CLKSEL_L3			(4 << 0)
-#define R1_CLKSEL_L4			(2 << 5)
-#define R1_CLKSEL_USB			(4 << 25)
-#define R1_CM_CLKSEL1_CORE_VAL		R1_CLKSEL_USB | RX_CLKSEL_SSI | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					R1_CLKSEL_L4 | R1_CLKSEL_L3
-#define R1_CLKSEL_MPU			(2 << 0)
-#define R1_CM_CLKSEL_MPU_VAL		R1_CLKSEL_MPU
-#define R1_CLKSEL_DSP			(2 << 0)
-#define R1_CLKSEL_DSP_IF		(2 << 5)
-#define R1_CM_CLKSEL_DSP_VAL		R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF
-#define R1_CLKSEL_GFX			(2 << 0)
-#define R1_CM_CLKSEL_GFX_VAL		R1_CLKSEL_GFX
-#define R1_CLKSEL_MDM			(4 << 0)
-#define R1_CM_CLKSEL_MDM_VAL		R1_CLKSEL_MDM
-
-/* 2430-Ratio Config 2 */
-#define R2_CLKSEL_L3			(6 << 0)
-#define R2_CLKSEL_L4			(2 << 5)
-#define R2_CLKSEL_USB			(2 << 25)
-#define R2_CM_CLKSEL1_CORE_VAL		R2_CLKSEL_USB | RX_CLKSEL_SSI | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					R2_CLKSEL_L4 | R2_CLKSEL_L3
-#define R2_CLKSEL_MPU			(2 << 0)
-#define R2_CM_CLKSEL_MPU_VAL		R2_CLKSEL_MPU
-#define R2_CLKSEL_DSP			(2 << 0)
-#define R2_CLKSEL_DSP_IF		(3 << 5)
-#define R2_CM_CLKSEL_DSP_VAL		R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF
-#define R2_CLKSEL_GFX			(2 << 0)
-#define R2_CM_CLKSEL_GFX_VAL		R2_CLKSEL_GFX
-#define R2_CLKSEL_MDM			(6 << 0)
-#define R2_CM_CLKSEL_MDM_VAL		R2_CLKSEL_MDM
-
-/* 2430-Ratio Bootm (BYPASS) */
-#define RB_CLKSEL_L3			(1 << 0)
-#define RB_CLKSEL_L4			(1 << 5)
-#define RB_CLKSEL_USB			(1 << 25)
-#define RB_CM_CLKSEL1_CORE_VAL		RB_CLKSEL_USB | RX_CLKSEL_SSI | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					RB_CLKSEL_L4 | RB_CLKSEL_L3
-#define RB_CLKSEL_MPU			(1 << 0)
-#define RB_CM_CLKSEL_MPU_VAL		RB_CLKSEL_MPU
-#define RB_CLKSEL_DSP			(1 << 0)
-#define RB_CLKSEL_DSP_IF		(1 << 5)
-#define RB_CM_CLKSEL_DSP_VAL		RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF
-#define RB_CLKSEL_GFX			(1 << 0)
-#define RB_CM_CLKSEL_GFX_VAL		RB_CLKSEL_GFX
-#define RB_CLKSEL_MDM			(1 << 0)
-#define RB_CM_CLKSEL_MDM_VAL		RB_CLKSEL_MDM
-
-/* 2420 Ratio Equivalents */
-#define RXX_CLKSEL_VLYNQ		(0x12 << 15)
-#define RXX_CLKSEL_SSI			(0x8 << 20)
-
-/* 2420-PRCM III 532MHz core */
-#define RIII_CLKSEL_L3			(4 << 0)	/* 133MHz */
-#define RIII_CLKSEL_L4			(2 << 5)	/* 66.5MHz */
-#define RIII_CLKSEL_USB			(4 << 25)	/* 33.25MHz */
-#define RIII_CM_CLKSEL1_CORE_VAL	RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
-					RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
-					RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
-					RIII_CLKSEL_L3
-#define RIII_CLKSEL_MPU			(2 << 0)	/* 266MHz */
-#define RIII_CM_CLKSEL_MPU_VAL		RIII_CLKSEL_MPU
-#define RIII_CLKSEL_DSP			(3 << 0)	/* c5x - 177.3MHz */
-#define RIII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 88.67MHz */
-#define RIII_SYNC_DSP			(1 << 7)	/* Enable sync */
-#define RIII_CLKSEL_IVA			(6 << 8)	/* iva1 - 88.67MHz */
-#define RIII_SYNC_IVA			(1 << 13)	/* Enable sync */
-#define RIII_CM_CLKSEL_DSP_VAL		RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
-					RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
-					RIII_CLKSEL_DSP
-#define RIII_CLKSEL_GFX			(2 << 0)	/* 66.5MHz */
-#define RIII_CM_CLKSEL_GFX_VAL		RIII_CLKSEL_GFX
-
-/* 2420-PRCM II 600MHz core */
-#define RII_CLKSEL_L3			(6 << 0)	/* 100MHz */
-#define RII_CLKSEL_L4			(2 << 5)	/* 50MHz */
-#define RII_CLKSEL_USB			(2 << 25)	/* 50MHz */
-#define RII_CM_CLKSEL1_CORE_VAL		RII_CLKSEL_USB | \
-					RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					RII_CLKSEL_L4 | RII_CLKSEL_L3
-#define RII_CLKSEL_MPU			(2 << 0)	/* 300MHz */
-#define RII_CM_CLKSEL_MPU_VAL		RII_CLKSEL_MPU
-#define RII_CLKSEL_DSP			(3 << 0)	/* c5x - 200MHz */
-#define RII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 100MHz */
-#define RII_SYNC_DSP			(0 << 7)	/* Bypass sync */
-#define RII_CLKSEL_IVA			(6 << 8)	/* iva1 - 200MHz */
-#define RII_SYNC_IVA			(0 << 13)	/* Bypass sync */
-#define RII_CM_CLKSEL_DSP_VAL		RII_SYNC_IVA | RII_CLKSEL_IVA | \
-					RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
-					RII_CLKSEL_DSP
-#define RII_CLKSEL_GFX			(2 << 0)	/* 50MHz */
-#define RII_CM_CLKSEL_GFX_VAL		RII_CLKSEL_GFX
-
-/* 2420-PRCM VII (boot) */
-#define RVII_CLKSEL_L3			(1 << 0)
-#define RVII_CLKSEL_L4			(1 << 5)
-#define RVII_CLKSEL_DSS1		(1 << 8)
-#define RVII_CLKSEL_DSS2		(0 << 13)
-#define RVII_CLKSEL_VLYNQ		(1 << 15)
-#define RVII_CLKSEL_SSI			(1 << 20)
-#define RVII_CLKSEL_USB			(1 << 25)
-
-#define RVII_CM_CLKSEL1_CORE_VAL	RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
-					RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \
-					RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3
-
-#define RVII_CLKSEL_MPU			(1 << 0) /* all divide by 1 */
-#define RVII_CM_CLKSEL_MPU_VAL		RVII_CLKSEL_MPU
-
-#define RVII_CLKSEL_DSP			(1 << 0)
-#define RVII_CLKSEL_DSP_IF		(1 << 5)
-#define RVII_SYNC_DSP			(0 << 7)
-#define RVII_CLKSEL_IVA			(1 << 8)
-#define RVII_SYNC_IVA			(0 << 13)
-#define RVII_CM_CLKSEL_DSP_VAL		RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \
-					RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP
-
-#define RVII_CLKSEL_GFX			(1 << 0)
-#define RVII_CM_CLKSEL_GFX_VAL		RVII_CLKSEL_GFX
-
-/*-------------------------------------------------------------------------
- * 2430 Target modes: Along with each configuration the CPU has several
- * modes which goes along with them. Modes mainly are the addition of
- * describe DPLL combinations to go along with a ratio.
- *-------------------------------------------------------------------------*/
-
-/* Hardware governed */
-#define MX_48M_SRC			(0 << 3)
-#define MX_54M_SRC			(0 << 5)
-#define MX_APLLS_CLIKIN_12		(3 << 23)
-#define MX_APLLS_CLIKIN_13		(2 << 23)
-#define MX_APLLS_CLIKIN_19_2		(0 << 23)
-
-/*
- * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
- * #2	(ratio1) baseport-target
- * #5a	(ratio1) baseport-target, target DPLL = 266*2 = 532MHz
- */
-#define M5A_DPLL_MULT_12		(133 << 12)
-#define M5A_DPLL_DIV_12			(5 << 8)
-#define M5A_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define M5A_DPLL_MULT_13		(266 << 12)
-#define M5A_DPLL_DIV_13			(12 << 8)
-#define M5A_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-#define M5A_DPLL_MULT_19		(180 << 12)
-#define M5A_DPLL_DIV_19			(12 << 8)
-#define M5A_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
-					MX_APLLS_CLIKIN_19_2
-/* #5b	(ratio1) target DPLL = 200*2 = 400MHz */
-#define M5B_DPLL_MULT_12		(50 << 12)
-#define M5B_DPLL_DIV_12			(2 << 8)
-#define M5B_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define M5B_DPLL_MULT_13		(200 << 12)
-#define M5B_DPLL_DIV_13			(12 << 8)
-
-#define M5B_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-#define M5B_DPLL_MULT_19		(125 << 12)
-#define M5B_DPLL_DIV_19			(31 << 8)
-#define M5B_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
-					MX_APLLS_CLIKIN_19_2
-/*
- * #4	(ratio2)
- * #3	(ratio2) baseport-target, target DPLL = 330*2 = 660MHz
- */
-#define M3_DPLL_MULT_12			(55 << 12)
-#define M3_DPLL_DIV_12			(1 << 8)
-#define M3_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define M3_DPLL_MULT_13			(330 << 12)
-#define M3_DPLL_DIV_13			(12 << 8)
-#define M3_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-#define M3_DPLL_MULT_19			(275 << 12)
-#define M3_DPLL_DIV_19			(15 << 8)
-#define M3_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
-					MX_APLLS_CLIKIN_19_2
-/* boot (boot) */
-#define MB_DPLL_MULT			(1 << 12)
-#define MB_DPLL_DIV			(0 << 8)
-#define MB_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
-					MB_DPLL_MULT | MX_APLLS_CLIKIN_12
-
-#define MB_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
-					MB_DPLL_MULT | MX_APLLS_CLIKIN_13
-
-#define MB_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
-					MB_DPLL_MULT | MX_APLLS_CLIKIN_19
-
-/*
- * 2430 - chassis (sedna)
- * 165 (ratio1) same as above #2
- * 150 (ratio1)
- * 133 (ratio2) same as above #4
- * 110 (ratio2) same as above #3
- * 104 (ratio2)
- * boot (boot)
- */
-
-/*
- * 2420 Equivalent - mode registers
- * PRCM II , target DPLL = 2*300MHz = 600MHz
- */
-#define MII_DPLL_MULT_12		(50 << 12)
-#define MII_DPLL_DIV_12			(1 << 8)
-#define MII_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define MII_DPLL_MULT_13		(300 << 12)
-#define MII_DPLL_DIV_13			(12 << 8)
-#define MII_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-
-/* PRCM III target DPLL = 2*266 = 532MHz*/
-#define MIII_DPLL_MULT_12		(133 << 12)
-#define MIII_DPLL_DIV_12		(5 << 8)
-#define MIII_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define MIII_DPLL_MULT_13		(266 << 12)
-#define MIII_DPLL_DIV_13		(12 << 8)
-#define MIII_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-
-/* PRCM VII (boot bypass) */
-#define MVII_CM_CLKSEL1_PLL_12_VAL	MB_CM_CLKSEL1_PLL_12_VAL
-#define MVII_CM_CLKSEL1_PLL_13_VAL	MB_CM_CLKSEL1_PLL_13_VAL
-
-/* High and low operation value */
-#define MX_CLKSEL2_PLL_2x_VAL		(2 << 0)
-#define MX_CLKSEL2_PLL_1x_VAL		(1 << 0)
-
-/*
- * These represent optimal values for common parts, it won't work for all.
- * As long as you scale down, most parameters are still work, they just
- * become sub-optimal. The RFR value goes in the opposite direction. If you
- * don't adjust it down as your clock period increases the refresh interval
- * will not be met. Setting all parameters for complete worst case may work,
- * but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration.	A dynamic call is
- * need for that as no single right value exists acorss production samples.
- *
- * Only the FULL speed values are given. Current code is such that rate
- * changes must be made at DPLLoutx2. The actual value adjustment for low
- * frequency operation will be handled by omap_set_performance()
- *
- * By having the boot loader boot up in the fastest L4 speed available likely
- * will result in something which you can switch between.
- */
-#define V24XX_SDRC_RFR_CTRL_133MHz	(0x0003de00 | 1)
-#define V24XX_SDRC_RFR_CTRL_100MHz	(0x0002da01 | 1)
-#define V24XX_SDRC_RFR_CTRL_110MHz	(0x0002da01 | 1) /* Need to calc */
-#define V24XX_SDRC_RFR_CTRL_BYPASS	(0x00005000 | 1) /* Need to calc */
-
-/* MPU speed defines */
-#define S12M	12000000
-#define S13M	13000000
-#define S19M	19200000
-#define S26M	26000000
-#define S100M	100000000
-#define S133M	133000000
-#define S150M	150000000
-#define S165M	165000000
-#define S200M	200000000
-#define S266M	266000000
-#define S300M	300000000
-#define S330M	330000000
-#define S400M	400000000
-#define S532M	532000000
-#define S600M	600000000
-#define S660M	660000000
-
-/*-------------------------------------------------------------------------
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
- * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
- * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
- * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
- *
- * Filling in table based on H4 boards and 2430-SDPs variants available.
- * There are quite a few more rates combinations which could be defined.
- *
- * When multiple values are defined the start up will try and choose the
- * fastest one. If a 'fast' value is defined, then automatically, the /2
- * one should be included as it can be used.	Generally having more that
- * one fast set does not make sense, as static timings need to be changed
- * to change the set.	 The exception is the bypass setting which is
- * availble for low power bypass.
- *
- * Note: This table needs to be sorted, fastest to slowest.
- *-------------------------------------------------------------------------*/
-static struct prcm_config rate_table[] = {
-	/* PRCM II - FAST */
-	{S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	{S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	/* PRCM III - FAST */
-	{S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	{S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	/* PRCM II - SLOW */
-	{S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	{S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	/* PRCM III - SLOW */
-	{S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	{S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	/* PRCM-VII (boot-bypass) */
-	{S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL,		/* 12MHz ARM*/
-		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
-		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_242X},
-
-	/* PRCM-VII (boot-bypass) */
-	{S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL,		/* 13MHz ARM */
-		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
-		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_242X},
-
-	/* PRCM #3 - ratio2 (ES2) - FAST */
-	{S13M, S660M, S330M, R2_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
-		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
-		R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_110MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5a - ratio1 - FAST */
-	{S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5b - ratio1 - FAST */
-	{S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL,		/* 200MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_243X},
-
-	/* PRCM #3 - ratio2 (ES2) - SLOW */
-	{S13M, S330M, S165M, R2_CM_CLKSEL_MPU_VAL,		/* 165MHz ARM */
-		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
-		R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_110MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5a - ratio1 - SLOW */
-	{S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5b - ratio1 - SLOW*/
-	{S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL,		/* 100MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_243X},
-
-	/* PRCM-boot/bypass */
-	{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL,		/* 13Mhz */
-		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
-		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_243X},
-
-	/* PRCM-boot/bypass */
-	{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL,		/* 12Mhz */
-		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
-		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_243X},
-
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+/* clksel_rate data common to 24xx/343x */
+static const struct clksel_rate gpt_32k_rates[] = {
+	 { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+	 { .div = 0 }
 };
 
-/*-------------------------------------------------------------------------
- * 24xx clock tree.
- *
- * NOTE:In many cases here we are assigning a 'default' parent.	In many
- *	cases the parent is selectable.	The get/set parent calls will also
- *	switch sources.
- *
- *	Many some clocks say always_enabled, but they can be auto idled for
- *	power savings. They will always be available upon clock request.
- *
- *	Several sources are given initial rates which may be wrong, this will
- *	be fixed up in the init func.
- *
- *	Things are broadly separated below by clock domains. It is
- *	noteworthy that most periferals have dependencies on multiple clock
- *	domains. Many get their interface clocks from the L4 domain, but get
- *	functional clocks from fixed sources or other core domain derived
- *	clocks.
- *-------------------------------------------------------------------------*/
-
-/* Base external input clocks */
-static struct clk func_32k_ck = {
-	.name		= "func_32k_ck",
-	.rate		= 32000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | ALWAYS_ENABLED,
+static const struct clksel_rate gpt_sys_rates[] = {
+	 { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+	 { .div = 0 }
 };
 
-/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
-static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
-	.name		= "osc_ck",
-	.rate		= 26000000,		/* fixed up in clock init */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-};
-
-/* With out modem likely 12MHz, with modem likely 13MHz */
-static struct clk sys_ck = {		/* (*12, *13, 19.2, 26, 38.4)MHz */
-	.name		= "sys_ck",		/* ~ ref_clk also */
-	.parent		= &osc_ck,
-	.rate		= 13000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
-	.rate_offset	= 6, /* sysclkdiv 1 or 2, already handled or no boot */
-	.recalc		= &omap2_sys_clk_recalc,
-};
-
-static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
-	.name		= "alt_ck",
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
-	.recalc		= &omap2_propagate_rate,
-};
-
-/*
- * Analog domain root source clocks
- */
-
-/* dpll_ck, is broken out in to special cases through clksel */
-static struct clk dpll_ck = {
-	.name		= "dpll_ck",
-	.parent		= &sys_ck,		/* Can be func_32k also */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES | RATE_CKCTL | CM_PLL_SEL1,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk apll96_ck = {
-	.name		= "apll96_ck",
-	.parent		= &sys_ck,
-	.rate		= 96000000,
-	.flags		= CLOCK_IN_OMAP242X |CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0x2,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk apll54_ck = {
-	.name		= "apll54_ck",
-	.parent		= &sys_ck,
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0x6,
-	.recalc		= &omap2_propagate_rate,
-};
-
-/*
- * PRCM digital base sources
- */
-static struct clk func_54m_ck = {
-	.name		= "func_54m_ck",
-	.parent		= &apll54_ck,	/* can also be alt_clk */
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES,
-	.src_offset	= 5,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0xff,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk core_ck = {
-	.name		= "core_ck",
-	.parent		= &dpll_ck,		/* can also be 32k */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				ALWAYS_ENABLED | RATE_PROPAGATES,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk sleep_ck = {		/* sys_clk or 32k */
-	.name		= "sleep_ck",
-	.parent		= &func_32k_ck,
-	.rate		= 32000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk func_96m_ck = {
-	.name		= "func_96m_ck",
-	.parent		= &apll96_ck,
-	.rate		= 96000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0xff,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk func_48m_ck = {
-	.name		= "func_48m_ck",
-	.parent		= &apll96_ck,	 /* 96M or Alt */
-	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES,
-	.src_offset	= 3,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0xff,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk func_12m_ck = {
-	.name		= "func_12m_ck",
-	.parent		= &func_48m_ck,
-	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-	.recalc		= &omap2_propagate_rate,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0xff,
-};
-
-/* Secure timer, only available in secure mode */
-static struct clk wdt1_osc_ck = {
-	.name		= "ck_wdt1_osc",
-	.parent		= &osc_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk sys_clkout = {
-	.name		= "sys_clkout",
-	.parent		= &func_54m_ck,
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_SYSCLKOUT_SEL1 | RATE_CKCTL,
-	.src_offset	= 0,
-	.enable_reg	= (void __iomem *)&PRCM_CLKOUT_CTRL,
-	.enable_bit	= 7,
-	.rate_offset	= 3,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* In 2430, new in 2420 ES2 */
-static struct clk sys_clkout2 = {
-	.name		= "sys_clkout2",
-	.parent		= &func_54m_ck,
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_SYSCLKOUT_SEL1 | RATE_CKCTL,
-	.src_offset	= 8,
-	.enable_reg	= (void __iomem *)&PRCM_CLKOUT_CTRL,
-	.enable_bit	= 15,
-	.rate_offset	= 11,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk emul_ck = {
-	.name		= "emul_ck",
-	.parent		= &func_54m_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&PRCM_CLKEMUL_CTRL,
-	.enable_bit	= 0,
-	.recalc		= &omap2_propagate_rate,
-
-};
-
-/*
- * MPU clock domain
- *	Clocks:
- *		MPU_FCLK, MPU_ICLK
- *		INT_M_FCLK, INT_M_I_CLK
- *
- * - Individual clocks are hardware managed.
- * - Base divider comes from: CM_CLKSEL_MPU
- *
- */
-static struct clk mpu_ck = {	/* Control cpu */
-	.name		= "mpu_ck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL |
-				ALWAYS_ENABLED | CM_MPU_SEL1 | DELAYED_APP |
-				CONFIG_PARTICIPANT | RATE_PROPAGATES,
-	.rate_offset	= 0,	/* bits 0-4 */
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain
- * Clocks:
- *	2430: IVA2.1_FCLK, IVA2.1_ICLK
- *	2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP
- */
-static struct clk iva2_1_fck = {
-	.name		= "iva2_1_fck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 |
-				DELAYED_APP | RATE_PROPAGATES |
-				CONFIG_PARTICIPANT,
-	.rate_offset	= 0,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
-	.enable_bit	= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk iva2_1_ick = {
-	.name		= "iva2_1_ick",
-	.parent		= &iva2_1_fck,
-	.flags		= CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 |
-				DELAYED_APP | CONFIG_PARTICIPANT,
-	.rate_offset	= 5,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * Won't be too specific here. The core clock comes into this block
- * it is divided then tee'ed. One branch goes directly to xyz enable
- * controls. The other branch gets further divided by 2 then possibly
- * routed into a synchronizer and out of clocks abc.
- */
-static struct clk dsp_fck = {
-	.name		= "dsp_fck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 |
-			DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES,
-	.rate_offset	= 0,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
-	.enable_bit	= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk dsp_ick = {
-	.name		= "dsp_ick",	 /* apparently ipi and isp */
-	.parent		= &dsp_fck,
-	.flags		= CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 |
-				DELAYED_APP | CONFIG_PARTICIPANT,
-	.rate_offset = 5,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_DSP,
-	.enable_bit	= 1,		/* for ipi */
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk iva1_ifck = {
-	.name		= "iva1_ifck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CM_DSP_SEL1 | RATE_CKCTL |
-			CONFIG_PARTICIPANT | RATE_PROPAGATES | DELAYED_APP,
-	.rate_offset= 8,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
-	.enable_bit	= 10,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* IVA1 mpu/int/i/f clocks are /2 of parent */
-static struct clk iva1_mpu_int_ifck = {
-	.name		= "iva1_mpu_int_ifck",
-	.parent		= &iva1_ifck,
-	.flags		= CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
-	.enable_bit	= 8,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * L3 clock domain
- * L3 clocks are used for both interface and functional clocks to
- * multiple entities. Some of these clocks are completely managed
- * by hardware, and some others allow software control. Hardware
- * managed ones general are based on directly CLK_REQ signals and
- * various auto idle settings. The functional spec sets many of these
- * as 'tie-high' for their enables.
- *
- * I-CLOCKS:
- *	L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA
- *	CAM, HS-USB.
- * F-CLOCK
- *	SSI.
- *
- * GPMC memories and SDRC have timing and clock sensitive registers which
- * may very well need notification when the clock changes. Currently for low
- * operating points, these are taken care of in sleep.S.
- */
-static struct clk core_l3_ck = {	/* Used for ick and fck, interconnect */
-	.name		= "core_l3_ck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 |
-				DELAYED_APP | CONFIG_PARTICIPANT |
-				RATE_PROPAGATES,
-	.rate_offset	= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk usb_l4_ick = {	/* FS-USB interface clock */
-	.name		= "usb_l4_ick",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP |
-				CONFIG_PARTICIPANT,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 0,
-	.rate_offset = 25,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * SSI is in L3 management domain, its direct parent is core not l3,
- * many core power domain entities are grouped into the L3 clock
- * domain.
- * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_CLIK
- *
- * ssr = core/1/2/3/4/5, sst = 1/2 ssr.
- */
-static struct clk ssi_ssr_sst_fck = {
-	.name		= "ssi_fck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,	/* bit 1 */
-	.enable_bit	= 1,
-	.rate_offset = 20,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * GFX clock domain
- *	Clocks:
- * GFX_FCLK, GFX_ICLK
- * GFX_CG1(2d), GFX_CG2(3d)
- *
- * GFX_FCLK runs from L3, and is divided by (1,2,3,4)
- * The 2d and 3d clocks run at a hardware determined
- * divided value of fclk.
- *
- */
-static struct clk gfx_3d_fck = {
-	.name		= "gfx_3d_fck",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_GFX_SEL1,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_GFX,
-	.enable_bit	= 2,
-	.rate_offset= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gfx_2d_fck = {
-	.name		= "gfx_2d_fck",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_GFX_SEL1,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_GFX,
-	.enable_bit	= 1,
-	.rate_offset= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gfx_ick = {
-	.name		= "gfx_ick",		/* From l3 */
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_GFX,	/* bit 0 */
-	.enable_bit	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-/*
- * Modem clock domain (2430)
- *	CLOCKS:
- *		MDM_OSC_CLK
- *		MDM_ICLK
- */
-static struct clk mdm_ick = {		/* used both as a ick and fck */
-	.name		= "mdm_ick",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP243X | RATE_CKCTL | CM_MODEM_SEL1 |
-				DELAYED_APP | CONFIG_PARTICIPANT,
-	.rate_offset	= 0,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_MDM,
-	.enable_bit	= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mdm_osc_ck = {
-	.name		= "mdm_osc_ck",
-	.rate		= 26000000,
-	.parent		= &osc_ck,
-	.flags		= CLOCK_IN_OMAP243X | RATE_FIXED,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_MDM,
-	.enable_bit	= 1,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-/*
- * L4 clock management domain
- *
- * This domain contains lots of interface clocks from the L4 interface, some
- * functional clocks.	Fixed APLL functional source clocks are managed in
- * this domain.
- */
-static struct clk l4_ck = {		/* used both as an ick and fck */
-	.name		= "l4_ck",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 |
-				DELAYED_APP | RATE_PROPAGATES,
-	.rate_offset	= 5,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk ssi_l4_ick = {
-	.name		= "ssi_l4_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,	/* bit 1 */
-	.enable_bit	= 1,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-/*
- * DSS clock domain
- * CLOCKs:
- * DSS_L4_ICLK, DSS_L3_ICLK,
- * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK
- *
- * DSS is both initiator and target.
- */
-static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
-	.name		= "dss_ick",
-	.parent		= &l4_ck,	/* really both l3 and l4 */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk dss1_fck = {
-	.name		= "dss1_fck",
-	.parent		= &core_ck,		/* Core or sys */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 0,
-	.rate_offset	= 8,
-	.src_offset	= 8,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk dss2_fck = {		/* Alt clk used in power management */
-	.name		= "dss2_fck",
-	.parent		= &sys_ck,		/* fixed at sys_ck or 48MHz */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_CORE_SEL1 | RATE_FIXED |
-				DELAYED_APP,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 1,
-	.src_offset	= 13,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk dss_54m_fck = {	/* Alt clk used in power management */
-	.name		= "dss_54m_fck",	/* 54m tv clk */
-	.parent		= &func_54m_ck,
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 2,
-	.recalc		= &omap2_propagate_rate,
-};
-
-/*
- * CORE power domain ICLK & FCLK defines.
- * Many of the these can have more than one possible parent. Entries
- * here will likely have an L4 interface parent, and may have multiple
- * functional clock parents.
- */
-static struct clk gpt1_ick = {
-	.name		= "gpt1_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,	/* Bit0 */
-	.enable_bit	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt1_fck = {
-	.name		= "gpt1_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_WKUP_SEL1,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_WKUP,	/* Bit0 */
-	.enable_bit	= 0,
-	.src_offset	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt2_ick = {
-	.name		= "gpt2_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	/* Bit4 */
-	.enable_bit	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt2_fck = {
-	.name		= "gpt2_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 4,
-	.src_offset	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt3_ick = {
-	.name		= "gpt3_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	/* Bit5 */
-	.enable_bit	= 5,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt3_fck = {
-	.name		= "gpt3_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 5,
-	.src_offset	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt4_ick = {
-	.name		= "gpt4_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	/* Bit6 */
-	.enable_bit	= 6,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt4_fck = {
-	.name		= "gpt4_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 6,
-	.src_offset	= 6,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt5_ick = {
-	.name		= "gpt5_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* Bit7 */
-	.enable_bit	= 7,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt5_fck = {
-	.name		= "gpt5_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 7,
-	.src_offset	= 8,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt6_ick = {
-	.name		= "gpt6_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_bit	= 8,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit8 */
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt6_fck = {
-	.name		= "gpt6_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 8,
-	.src_offset	= 10,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt7_ick = {
-	.name		= "gpt7_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit9 */
-	.enable_bit	= 9,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt7_fck = {
-	.name		= "gpt7_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 9,
-	.src_offset	= 12,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt8_ick = {
-	.name		= "gpt8_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit10 */
-	.enable_bit	= 10,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt8_fck = {
-	.name		= "gpt8_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 10,
-	.src_offset	= 14,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt9_ick = {
-	.name		= "gpt9_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 11,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt9_fck = {
-	.name		= "gpt9_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-					CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 11,
-	.src_offset	= 16,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt10_ick = {
-	.name		= "gpt10_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 12,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt10_fck = {
-	.name		= "gpt10_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-					CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 12,
-	.src_offset	= 18,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt11_ick = {
-	.name		= "gpt11_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 13,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt11_fck = {
-	.name		= "gpt11_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-					CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 13,
-	.src_offset	= 20,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt12_ick = {
-	.name		= "gpt12_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit14 */
-	.enable_bit	= 14,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt12_fck = {
-	.name		= "gpt12_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-					CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 14,
-	.src_offset	= 22,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp1_ick = {
-	.name		= "mcbsp1_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_bit	= 15,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit16 */
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp1_fck = {
-	.name		= "mcbsp1_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_bit	= 15,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp2_ick = {
-	.name		= "mcbsp2_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_bit	= 16,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp2_fck = {
-	.name		= "mcbsp2_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_bit	= 16,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp3_ick = {
-	.name		= "mcbsp3_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp3_fck = {
-	.name		= "mcbsp3_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp4_ick = {
-	.name		= "mcbsp4_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp4_fck = {
-	.name		= "mcbsp4_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp5_ick = {
-	.name		= "mcbsp5_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 5,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp5_fck = {
-	.name		= "mcbsp5_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 5,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi1_ick = {
-	.name		= "mcspi_ick",
-	.id		= 1,
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 17,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi1_fck = {
-	.name		= "mcspi_fck",
-	.id		= 1,
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 17,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi2_ick = {
-	.name		= "mcspi_ick",
-	.id		= 2,
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 18,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi2_fck = {
-	.name		= "mcspi_fck",
-	.id		= 2,
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 18,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi3_ick = {
-	.name		= "mcspi_ick",
-	.id		= 3,
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 9,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi3_fck = {
-	.name		= "mcspi_fck",
-	.id		= 3,
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 9,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart1_ick = {
-	.name		= "uart1_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 21,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart1_fck = {
-	.name		= "uart1_fck",
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 21,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart2_ick = {
-	.name		= "uart2_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 22,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart2_fck = {
-	.name		= "uart2_fck",
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 22,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart3_ick = {
-	.name		= "uart3_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart3_fck = {
-	.name		= "uart3_fck",
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpios_ick = {
-	.name		= "gpios_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpios_fck = {
-	.name		= "gpios_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_WKUP,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mpu_wdt_ick = {
-	.name		= "mpu_wdt_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mpu_wdt_fck = {
-	.name		= "mpu_wdt_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_WKUP,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk sync_32k_ick = {
-	.name		= "sync_32k_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 1,
-	.recalc		= &omap2_followparent_recalc,
-};
-static struct clk wdt1_ick = {
-	.name		= "wdt1_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-static struct clk omapctrl_ick = {
-	.name		= "omapctrl_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 5,
-	.recalc		= &omap2_followparent_recalc,
-};
-static struct clk icr_ick = {
-	.name		= "icr_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 6,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk cam_ick = {
-	.name		= "cam_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 31,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk cam_fck = {
-	.name		= "cam_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 31,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mailboxes_ick = {
-	.name		= "mailboxes_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 30,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk wdt4_ick = {
-	.name		= "wdt4_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 29,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk wdt4_fck = {
-	.name		= "wdt4_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 29,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk wdt3_ick = {
-	.name		= "wdt3_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 28,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk wdt3_fck = {
-	.name		= "wdt3_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 28,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mspro_ick = {
-	.name		= "mspro_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 27,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mspro_fck = {
-	.name		= "mspro_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 27,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmc_ick = {
-	.name		= "mmc_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 26,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmc_fck = {
-	.name		= "mmc_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 26,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk fac_ick = {
-	.name		= "fac_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 25,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk fac_fck = {
-	.name		= "fac_fck",
-	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 25,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk eac_ick = {
-	.name		= "eac_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 24,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk eac_fck = {
-	.name		= "eac_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 24,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk hdq_ick = {
-	.name		= "hdq_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 23,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk hdq_fck = {
-	.name		= "hdq_fck",
-	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 23,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2c2_ick = {
-	.name		= "i2c_ick",
-	.id		= 2,
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 20,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2c2_fck = {
-	.name		= "i2c_fck",
-	.id		= 2,
-	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 20,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2chs2_fck = {
-	.name		= "i2chs2_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 20,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2c1_ick = {
-	.name		= "i2c_ick",
-	.id		= 1,
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 19,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2c1_fck = {
-	.name		= "i2c_fck",
-	.id		= 1,
-	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 19,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2chs1_fck = {
-	.name		= "i2chs1_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 19,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk vlynq_ick = {
-	.name		= "vlynq_ick",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk vlynq_fck = {
-	.name		= "vlynq_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X  | RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 3,
-	.src_offset	= 15,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk sdrc_ick = {
-	.name		= "sdrc_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN3_CORE,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk des_ick = {
-	.name		= "des_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
-	.enable_bit	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk sha_ick = {
-	.name		= "sha_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
-	.enable_bit	= 1,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk rng_ick = {
-	.name		= "rng_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk aes_ick = {
-	.name		= "aes_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk pka_ick = {
-	.name		= "pka_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
-	.enable_bit	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk usb_fck = {
-	.name		= "usb_fck",
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk usbhs_ick = {
-	.name		= "usbhs_ick",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 6,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmchs1_ick = {
-	.name		= "mmchs1_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 7,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmchs1_fck = {
-	.name		= "mmchs1_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 7,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmchs2_ick = {
-	.name		= "mmchs2_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 8,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmchs2_fck = {
-	.name		= "mmchs2_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 8,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpio5_ick = {
-	.name		= "gpio5_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 10,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpio5_fck = {
-	.name		= "gpio5_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 10,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mdm_intc_ick = {
-	.name		= "mdm_intc_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 11,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmchsdb1_fck = {
-	.name		= "mmchsdb1_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 16,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmchsdb2_fck = {
-	.name		= "mmchsdb2_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 17,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-/*
- * This clock is a composite clock which does entire set changes then
- * forces a rebalance. It keys on the MPU speed, but it really could
- * be any key speed part of a set in the rate table.
- *
- * to really change a set, you need memory table sets which get changed
- * in sram, pre-notifiers & post notifiers, changing the top set, without
- * having low level display recalc's won't work... this is why dpm notifiers
- * work, isr's off, walk a list of clocks already _off_ and not messing with
- * the bus.
- *
- * This clock should have no parent. It embodies the entire upper level
- * active set. A parent will mess up some of the init also.
- */
-static struct clk virt_prcm_set = {
-	.name		= "virt_prcm_set",
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP,
-	.parent		= &mpu_ck,	/* Indexed by mpu speed, no parent */
-	.recalc		= &omap2_mpu_recalc,	/* sets are keyed on mpu rate */
-	.set_rate	= &omap2_select_table_rate,
-	.round_rate	= &omap2_round_to_table_rate,
+static const struct clksel_rate gfx_l3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_343X },
+	{ .div = 0 }
 };
 
-static struct clk *onchip_clks[] = {
-	/* external root sources */
-	&func_32k_ck,
-	&osc_ck,
-	&sys_ck,
-	&alt_ck,
-	/* internal analog sources */
-	&dpll_ck,
-	&apll96_ck,
-	&apll54_ck,
-	/* internal prcm root sources */
-	&func_54m_ck,
-	&core_ck,
-	&sleep_ck,
-	&func_96m_ck,
-	&func_48m_ck,
-	&func_12m_ck,
-	&wdt1_osc_ck,
-	&sys_clkout,
-	&sys_clkout2,
-	&emul_ck,
-	/* mpu domain clocks */
-	&mpu_ck,
-	/* dsp domain clocks */
-	&iva2_1_fck,		/* 2430 */
-	&iva2_1_ick,
-	&dsp_ick,		/* 2420 */
-	&dsp_fck,
-	&iva1_ifck,
-	&iva1_mpu_int_ifck,
-	/* GFX domain clocks */
-	&gfx_3d_fck,
-	&gfx_2d_fck,
-	&gfx_ick,
-	/* Modem domain clocks */
-	&mdm_ick,
-	&mdm_osc_ck,
-	/* DSS domain clocks */
-	&dss_ick,
-	&dss1_fck,
-	&dss2_fck,
-	&dss_54m_fck,
-	/* L3 domain clocks */
-	&core_l3_ck,
-	&ssi_ssr_sst_fck,
-	&usb_l4_ick,
-	/* L4 domain clocks */
-	&l4_ck,			/* used as both core_l4 and wu_l4 */
-	&ssi_l4_ick,
-	/* virtual meta-group clock */
-	&virt_prcm_set,
-	/* general l4 interface ck, multi-parent functional clk */
-	&gpt1_ick,
-	&gpt1_fck,
-	&gpt2_ick,
-	&gpt2_fck,
-	&gpt3_ick,
-	&gpt3_fck,
-	&gpt4_ick,
-	&gpt4_fck,
-	&gpt5_ick,
-	&gpt5_fck,
-	&gpt6_ick,
-	&gpt6_fck,
-	&gpt7_ick,
-	&gpt7_fck,
-	&gpt8_ick,
-	&gpt8_fck,
-	&gpt9_ick,
-	&gpt9_fck,
-	&gpt10_ick,
-	&gpt10_fck,
-	&gpt11_ick,
-	&gpt11_fck,
-	&gpt12_ick,
-	&gpt12_fck,
-	&mcbsp1_ick,
-	&mcbsp1_fck,
-	&mcbsp2_ick,
-	&mcbsp2_fck,
-	&mcbsp3_ick,
-	&mcbsp3_fck,
-	&mcbsp4_ick,
-	&mcbsp4_fck,
-	&mcbsp5_ick,
-	&mcbsp5_fck,
-	&mcspi1_ick,
-	&mcspi1_fck,
-	&mcspi2_ick,
-	&mcspi2_fck,
-	&mcspi3_ick,
-	&mcspi3_fck,
-	&uart1_ick,
-	&uart1_fck,
-	&uart2_ick,
-	&uart2_fck,
-	&uart3_ick,
-	&uart3_fck,
-	&gpios_ick,
-	&gpios_fck,
-	&mpu_wdt_ick,
-	&mpu_wdt_fck,
-	&sync_32k_ick,
-	&wdt1_ick,
-	&omapctrl_ick,
-	&icr_ick,
-	&cam_fck,
-	&cam_ick,
-	&mailboxes_ick,
-	&wdt4_ick,
-	&wdt4_fck,
-	&wdt3_ick,
-	&wdt3_fck,
-	&mspro_ick,
-	&mspro_fck,
-	&mmc_ick,
-	&mmc_fck,
-	&fac_ick,
-	&fac_fck,
-	&eac_ick,
-	&eac_fck,
-	&hdq_ick,
-	&hdq_fck,
-	&i2c1_ick,
-	&i2c1_fck,
-	&i2chs1_fck,
-	&i2c2_ick,
-	&i2c2_fck,
-	&i2chs2_fck,
-	&vlynq_ick,
-	&vlynq_fck,
-	&sdrc_ick,
-	&des_ick,
-	&sha_ick,
-	&rng_ick,
-	&aes_ick,
-	&pka_ick,
-	&usb_fck,
-	&usbhs_ick,
-	&mmchs1_ick,
-	&mmchs1_fck,
-	&mmchs2_ick,
-	&mmchs2_fck,
-	&gpio5_ick,
-	&gpio5_fck,
-	&mdm_intc_ick,
-	&mmchsdb1_fck,
-	&mmchsdb2_fck,
-};
 
 #endif
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
new file mode 100644
index 0000000..ece32d8
--- /dev/null
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -0,0 +1,539 @@
+/*
+ *  linux/arch/arm/mach-omap2/clock.c
+ *
+ *  Copyright (C) 2005-2008 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2008 Nokia Corporation
+ *
+ *  Contacts:
+ *  Richard Woodruff <r-woodruff2@ti.com>
+ *  Paul Walmsley
+ *
+ *  Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ *  Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+
+#include <linux/io.h>
+#include <linux/cpufreq.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/sram.h>
+#include <asm/div64.h>
+#include <asm/bitops.h>
+
+#include "memory.h"
+#include "clock.h"
+#include "clock24xx.h"
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+
+/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
+#define EN_APLL_STOPPED			0
+#define EN_APLL_LOCKED			3
+
+/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */
+#define APLLS_CLKIN_19_2MHZ		0
+#define APLLS_CLKIN_13MHZ		2
+#define APLLS_CLKIN_12MHZ		3
+
+/* #define DOWN_VARIABLE_DPLL 1 */		/* Experimental */
+
+static struct prcm_config *curr_prcm_set;
+static struct clk *vclk;
+static struct clk *sclk;
+
+/*-------------------------------------------------------------------------
+ * Omap24xx specific clock functions
+ *-------------------------------------------------------------------------*/
+
+/* This actually returns the rate of core_ck, not dpll_ck. */
+static u32 omap2_get_dpll_rate_24xx(struct clk *tclk)
+{
+	long long dpll_clk;
+	u8 amult;
+
+	dpll_clk = omap2_get_dpll_rate(tclk);
+
+	amult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	amult &= OMAP24XX_CORE_CLK_SRC_MASK;
+	dpll_clk *= amult;
+
+	return dpll_clk;
+}
+
+static int omap2_enable_osc_ck(struct clk *clk)
+{
+	u32 pcc;
+
+	pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+
+	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK,
+		      OMAP24XX_PRCM_CLKSRC_CTRL);
+
+	return 0;
+}
+
+static void omap2_disable_osc_ck(struct clk *clk)
+{
+	u32 pcc;
+
+	pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+
+	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK,
+		      OMAP24XX_PRCM_CLKSRC_CTRL);
+}
+
+#ifdef OLD_CK
+/* Recalculate SYST_CLK */
+static void omap2_sys_clk_recalc(struct clk * clk)
+{
+	u32 div = PRCM_CLKSRC_CTRL;
+	div &= (1 << 7) | (1 << 6);	/* Test if ext clk divided by 1 or 2 */
+	div >>= clk->rate_offset;
+	clk->rate = (clk->parent->rate / div);
+	propagate_rate(clk);
+}
+#endif	/* OLD_CK */
+
+/* Enable an APLL if off */
+static int omap2_clk_fixed_enable(struct clk *clk)
+{
+	u32 cval, apll_mask;
+
+	apll_mask = EN_APLL_LOCKED << clk->enable_bit;
+
+	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+
+	if ((cval & apll_mask) == apll_mask)
+		return 0;   /* apll already enabled */
+
+	cval &= ~apll_mask;
+	cval |= apll_mask;
+	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
+
+	if (clk == &apll96_ck)
+		cval = OMAP24XX_ST_96M_APLL;
+	else if (clk == &apll54_ck)
+		cval = OMAP24XX_ST_54M_APLL;
+
+	omap2_wait_clock_ready(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval,
+			    clk->name);
+
+	/*
+	 * REVISIT: Should we return an error code if omap2_wait_clock_ready()
+	 * fails?
+	 */
+	return 0;
+}
+
+/* Stop APLL */
+static void omap2_clk_fixed_disable(struct clk *clk)
+{
+	u32 cval;
+
+	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
+	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
+}
+
+/*
+ * Uses the current prcm set to tell if a rate is valid.
+ * You can go slower, but not faster within a given rate set.
+ */
+static u32 omap2_dpll_round_rate(unsigned long target_rate)
+{
+	u32 high, low, core_clk_src;
+
+	core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	if (core_clk_src == CORE_CLK_SRC_DPLL) {	/* DPLL clockout */
+		high = curr_prcm_set->dpll_speed * 2;
+		low = curr_prcm_set->dpll_speed;
+	} else {				/* DPLL clockout x 2 */
+		high = curr_prcm_set->dpll_speed;
+		low = curr_prcm_set->dpll_speed / 2;
+	}
+
+#ifdef DOWN_VARIABLE_DPLL
+	if (target_rate > high)
+		return high;
+	else
+		return target_rate;
+#else
+	if (target_rate > low)
+		return high;
+	else
+		return low;
+#endif
+
+}
+
+static void omap2_dpll_recalc(struct clk *clk)
+{
+	clk->rate = omap2_get_dpll_rate_24xx(clk);
+
+	propagate_rate(clk);
+}
+
+static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate)
+{
+	u32 cur_rate, low, mult, div, valid_rate, done_rate;
+	u32 bypass = 0;
+	struct prcm_config tmpset;
+	const struct dpll_data *dd;
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	local_irq_save(flags);
+	cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
+	mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	mult &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	if ((rate == (cur_rate / 2)) && (mult == 2)) {
+		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1);
+	} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
+		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+	} else if (rate != cur_rate) {
+		valid_rate = omap2_dpll_round_rate(rate);
+		if (valid_rate != rate)
+			goto dpll_exit;
+
+		if (mult == 1)
+			low = curr_prcm_set->dpll_speed;
+		else
+			low = curr_prcm_set->dpll_speed / 2;
+
+		dd = clk->dpll_data;
+		if (!dd)
+			goto dpll_exit;
+
+		tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
+		tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
+					   dd->div1_mask);
+		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
+		tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+		tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
+		if (rate > low) {
+			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
+			mult = ((rate / 2) / 1000000);
+			done_rate = CORE_CLK_SRC_DPLL_X2;
+		} else {
+			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
+			mult = (rate / 1000000);
+			done_rate = CORE_CLK_SRC_DPLL;
+		}
+		tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
+		tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
+
+		/* Worst case */
+		tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
+
+		if (rate == curr_prcm_set->xtal_speed)	/* If asking for 1-1 */
+			bypass = 1;
+
+		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1); /* For init_mem */
+
+		/* Force dll lock mode */
+		omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
+			       bypass);
+
+		/* Errata: ret dll entry state */
+		omap2_init_memory_params(omap2_dll_force_needed());
+		omap2_reprogram_sdrc(done_rate, 0);
+	}
+	omap2_dpll_recalc(&dpll_ck);
+	ret = 0;
+
+dpll_exit:
+	local_irq_restore(flags);
+	return(ret);
+}
+
+/**
+ * omap2_table_mpu_recalc - just return the MPU speed
+ * @clk: virt_prcm_set struct clk
+ *
+ * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
+ */
+static void omap2_table_mpu_recalc(struct clk *clk)
+{
+	clk->rate = curr_prcm_set->mpu_speed;
+}
+
+/*
+ * Look for a rate equal or less than the target rate given a configuration set.
+ *
+ * What's not entirely clear is "which" field represents the key field.
+ * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
+ * just uses the ARM rates.
+ */
+static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
+{
+	struct prcm_config *ptr;
+	long highest_rate;
+
+	if (clk != &virt_prcm_set)
+		return -EINVAL;
+
+	highest_rate = -EINVAL;
+
+	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
+		if (!(ptr->flags & cpu_mask))
+			continue;
+		if (ptr->xtal_speed != sys_ck.rate)
+			continue;
+
+		highest_rate = ptr->mpu_speed;
+
+		/* Can check only after xtal frequency check */
+		if (ptr->mpu_speed <= rate)
+			break;
+	}
+	return highest_rate;
+}
+
+/* Sets basic clocks based on the specified rate */
+static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
+{
+	u32 cur_rate, done_rate, bypass = 0, tmp;
+	struct prcm_config *prcm;
+	unsigned long found_speed = 0;
+	unsigned long flags;
+
+	if (clk != &virt_prcm_set)
+		return -EINVAL;
+
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+
+		if (prcm->mpu_speed <= rate) {
+			found_speed = prcm->mpu_speed;
+			break;
+		}
+	}
+
+	if (!found_speed) {
+		printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
+		       rate / 1000000);
+		return -EINVAL;
+	}
+
+	curr_prcm_set = prcm;
+	cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
+
+	if (prcm->dpll_speed == cur_rate / 2) {
+		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1);
+	} else if (prcm->dpll_speed == cur_rate * 2) {
+		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+	} else if (prcm->dpll_speed != cur_rate) {
+		local_irq_save(flags);
+
+		if (prcm->dpll_speed == prcm->xtal_speed)
+			bypass = 1;
+
+		if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) ==
+		    CORE_CLK_SRC_DPLL_X2)
+			done_rate = CORE_CLK_SRC_DPLL_X2;
+		else
+			done_rate = CORE_CLK_SRC_DPLL;
+
+		/* MPU divider */
+		cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
+
+		/* dsp + iva1 div(2420), iva2.1(2430) */
+		cm_write_mod_reg(prcm->cm_clksel_dsp,
+				 OMAP24XX_DSP_MOD, CM_CLKSEL);
+
+		cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
+
+		/* Major subsystem dividers */
+		tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
+		cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, CM_CLKSEL1);
+		if (cpu_is_omap2430())
+			cm_write_mod_reg(prcm->cm_clksel_mdm,
+					 OMAP2430_MDM_MOD, CM_CLKSEL);
+
+		/* x2 to enter init_mem */
+		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+
+		omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
+			       bypass);
+
+		omap2_init_memory_params(omap2_dll_force_needed());
+		omap2_reprogram_sdrc(done_rate, 0);
+
+		local_irq_restore(flags);
+	}
+	omap2_dpll_recalc(&dpll_ck);
+
+	return 0;
+}
+
+static struct clk_functions omap2_clk_functions = {
+	.clk_enable		= omap2_clk_enable,
+	.clk_disable		= omap2_clk_disable,
+	.clk_round_rate		= omap2_clk_round_rate,
+	.clk_set_rate		= omap2_clk_set_rate,
+	.clk_set_parent		= omap2_clk_set_parent,
+	.clk_disable_unused	= omap2_clk_disable_unused,
+};
+
+static u32 omap2_get_apll_clkin(void)
+{
+	u32 aplls, sclk = 0;
+
+	aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
+	aplls &= OMAP24XX_APLLS_CLKIN_MASK;
+	aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
+
+	if (aplls == APLLS_CLKIN_19_2MHZ)
+		sclk = 19200000;
+	else if (aplls == APLLS_CLKIN_13MHZ)
+		sclk = 13000000;
+	else if (aplls == APLLS_CLKIN_12MHZ)
+		sclk = 12000000;
+
+	return sclk;
+}
+
+static u32 omap2_get_sysclkdiv(void)
+{
+	u32 div;
+
+	div = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+	div &= OMAP_SYSCLKDIV_MASK;
+	div >>= OMAP_SYSCLKDIV_SHIFT;
+
+	return div;
+}
+
+static void omap2_osc_clk_recalc(struct clk *clk)
+{
+	clk->rate = omap2_get_apll_clkin() * omap2_get_sysclkdiv();
+	propagate_rate(clk);
+}
+
+static void omap2_sys_clk_recalc(struct clk *clk)
+{
+	clk->rate = clk->parent->rate / omap2_get_sysclkdiv();
+	propagate_rate(clk);
+}
+
+/*
+ * Set clocks for bypass mode for reboot to work.
+ */
+void omap2_clk_prepare_for_reboot(void)
+{
+	u32 rate;
+
+	if (vclk == NULL || sclk == NULL)
+		return;
+
+	rate = clk_get_rate(sclk);
+	clk_set_rate(vclk, rate);
+}
+
+/*
+ * Switch the MPU rate if specified on cmdline.
+ * We cannot do this early until cmdline is parsed.
+ */
+static int __init omap2_clk_arch_init(void)
+{
+	if (!mpurate)
+		return -EINVAL;
+
+	if (omap2_select_table_rate(&virt_prcm_set, mpurate))
+		printk(KERN_ERR "Could not find matching MPU rate\n");
+
+	recalculate_root_clocks();
+
+	printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): "
+	       "%ld.%01ld/%ld/%ld MHz\n",
+	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
+	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
+
+	return 0;
+}
+arch_initcall(omap2_clk_arch_init);
+
+int __init omap2_clk_init(void)
+{
+	struct prcm_config *prcm;
+	struct clk **clkp;
+	u32 clkrate;
+
+	if (cpu_is_omap242x())
+		cpu_mask = RATE_IN_242X;
+	else if (cpu_is_omap2430())
+		cpu_mask = RATE_IN_243X;
+
+	clk_init(&omap2_clk_functions);
+
+	omap2_osc_clk_recalc(&osc_ck);
+	omap2_sys_clk_recalc(&sys_ck);
+
+	for (clkp = onchip_24xx_clks;
+	     clkp < onchip_24xx_clks + ARRAY_SIZE(onchip_24xx_clks);
+	     clkp++) {
+
+		if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) {
+			clk_register(*clkp);
+			continue;
+		}
+
+		if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) {
+			clk_register(*clkp);
+			continue;
+		}
+	}
+
+	/* Check the MPU rate set by bootloader */
+	clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+		if (prcm->dpll_speed <= clkrate)
+			 break;
+	}
+	curr_prcm_set = prcm;
+
+	recalculate_root_clocks();
+
+	printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
+	       "%ld.%01ld/%ld/%ld MHz\n",
+	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
+	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_enable_init_clocks();
+
+	/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
+	vclk = clk_get(NULL, "virt_prcm_set");
+	sclk = clk_get(NULL, "sys_ck");
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
new file mode 100644
index 0000000..88081ed
--- /dev/null
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -0,0 +1,2643 @@
+/*
+ *  linux/arch/arm/mach-omap2/clock24xx.h
+ *
+ *  Copyright (C) 2005-2008 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2008 Nokia Corporation
+ *
+ *  Contacts:
+ *  Richard Woodruff <r-woodruff2@ti.com>
+ *  Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H
+
+#include "clock.h"
+
+#include "prm.h"
+#include "cm.h"
+#include "prm-regbits-24xx.h"
+#include "cm-regbits-24xx.h"
+#include "sdrc.h"
+
+static void omap2_table_mpu_recalc(struct clk *clk);
+static int omap2_select_table_rate(struct clk *clk, unsigned long rate);
+static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
+static void omap2_sys_clk_recalc(struct clk *clk);
+static void omap2_osc_clk_recalc(struct clk *clk);
+static void omap2_sys_clk_recalc(struct clk *clk);
+static void omap2_dpll_recalc(struct clk *clk);
+static int omap2_clk_fixed_enable(struct clk *clk);
+static void omap2_clk_fixed_disable(struct clk *clk);
+static int omap2_enable_osc_ck(struct clk *clk);
+static void omap2_disable_osc_ck(struct clk *clk);
+static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate);
+
+/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
+ * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ */
+struct prcm_config {
+	unsigned long xtal_speed;	/* crystal rate */
+	unsigned long dpll_speed;	/* dpll: out*xtal*M/(N-1)table_recalc */
+	unsigned long mpu_speed;	/* speed of MPU */
+	unsigned long cm_clksel_mpu;	/* mpu divider */
+	unsigned long cm_clksel_dsp;	/* dsp+iva1 div(2420), iva2.1(2430) */
+	unsigned long cm_clksel_gfx;	/* gfx dividers */
+	unsigned long cm_clksel1_core;	/* major subsystem dividers */
+	unsigned long cm_clksel1_pll;	/* m,n */
+	unsigned long cm_clksel2_pll;	/* dpllx1 or x2 out */
+	unsigned long cm_clksel_mdm;	/* modem dividers 2430 only */
+	unsigned long base_sdrc_rfr;	/* base refresh timing for a set */
+	unsigned char flags;
+};
+
+/*
+ * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
+ * These configurations are characterized by voltage and speed for clocks.
+ * The device is only validated for certain combinations. One way to express
+ * these combinations is via the 'ratio's' which the clocks operate with
+ * respect to each other. These ratio sets are for a given voltage/DPLL
+ * setting. All configurations can be described by a DPLL setting and a ratio
+ * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
+ *
+ * 2430 differs from 2420 in that there are no more phase synchronizers used.
+ * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
+ * 2430 (iva2.1, NOdsp, mdm)
+ */
+
+/* Core fields for cm_clksel, not ratio governed */
+#define RX_CLKSEL_DSS1			(0x10 << 8)
+#define RX_CLKSEL_DSS2			(0x0 << 13)
+#define RX_CLKSEL_SSI			(0x5 << 20)
+
+/*-------------------------------------------------------------------------
+ * Voltage/DPLL ratios
+ *-------------------------------------------------------------------------*/
+
+/* 2430 Ratio's, 2430-Ratio Config 1 */
+#define R1_CLKSEL_L3			(4 << 0)
+#define R1_CLKSEL_L4			(2 << 5)
+#define R1_CLKSEL_USB			(4 << 25)
+#define R1_CM_CLKSEL1_CORE_VAL		R1_CLKSEL_USB | RX_CLKSEL_SSI | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					R1_CLKSEL_L4 | R1_CLKSEL_L3
+#define R1_CLKSEL_MPU			(2 << 0)
+#define R1_CM_CLKSEL_MPU_VAL		R1_CLKSEL_MPU
+#define R1_CLKSEL_DSP			(2 << 0)
+#define R1_CLKSEL_DSP_IF		(2 << 5)
+#define R1_CM_CLKSEL_DSP_VAL		R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF
+#define R1_CLKSEL_GFX			(2 << 0)
+#define R1_CM_CLKSEL_GFX_VAL		R1_CLKSEL_GFX
+#define R1_CLKSEL_MDM			(4 << 0)
+#define R1_CM_CLKSEL_MDM_VAL		R1_CLKSEL_MDM
+
+/* 2430-Ratio Config 2 */
+#define R2_CLKSEL_L3			(6 << 0)
+#define R2_CLKSEL_L4			(2 << 5)
+#define R2_CLKSEL_USB			(2 << 25)
+#define R2_CM_CLKSEL1_CORE_VAL		R2_CLKSEL_USB | RX_CLKSEL_SSI | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					R2_CLKSEL_L4 | R2_CLKSEL_L3
+#define R2_CLKSEL_MPU			(2 << 0)
+#define R2_CM_CLKSEL_MPU_VAL		R2_CLKSEL_MPU
+#define R2_CLKSEL_DSP			(2 << 0)
+#define R2_CLKSEL_DSP_IF		(3 << 5)
+#define R2_CM_CLKSEL_DSP_VAL		R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF
+#define R2_CLKSEL_GFX			(2 << 0)
+#define R2_CM_CLKSEL_GFX_VAL		R2_CLKSEL_GFX
+#define R2_CLKSEL_MDM			(6 << 0)
+#define R2_CM_CLKSEL_MDM_VAL		R2_CLKSEL_MDM
+
+/* 2430-Ratio Bootm (BYPASS) */
+#define RB_CLKSEL_L3			(1 << 0)
+#define RB_CLKSEL_L4			(1 << 5)
+#define RB_CLKSEL_USB			(1 << 25)
+#define RB_CM_CLKSEL1_CORE_VAL		RB_CLKSEL_USB | RX_CLKSEL_SSI | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					RB_CLKSEL_L4 | RB_CLKSEL_L3
+#define RB_CLKSEL_MPU			(1 << 0)
+#define RB_CM_CLKSEL_MPU_VAL		RB_CLKSEL_MPU
+#define RB_CLKSEL_DSP			(1 << 0)
+#define RB_CLKSEL_DSP_IF		(1 << 5)
+#define RB_CM_CLKSEL_DSP_VAL		RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF
+#define RB_CLKSEL_GFX			(1 << 0)
+#define RB_CM_CLKSEL_GFX_VAL		RB_CLKSEL_GFX
+#define RB_CLKSEL_MDM			(1 << 0)
+#define RB_CM_CLKSEL_MDM_VAL		RB_CLKSEL_MDM
+
+/* 2420 Ratio Equivalents */
+#define RXX_CLKSEL_VLYNQ		(0x12 << 15)
+#define RXX_CLKSEL_SSI			(0x8 << 20)
+
+/* 2420-PRCM III 532MHz core */
+#define RIII_CLKSEL_L3			(4 << 0)	/* 133MHz */
+#define RIII_CLKSEL_L4			(2 << 5)	/* 66.5MHz */
+#define RIII_CLKSEL_USB			(4 << 25)	/* 33.25MHz */
+#define RIII_CM_CLKSEL1_CORE_VAL	RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
+					RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
+					RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
+					RIII_CLKSEL_L3
+#define RIII_CLKSEL_MPU			(2 << 0)	/* 266MHz */
+#define RIII_CM_CLKSEL_MPU_VAL		RIII_CLKSEL_MPU
+#define RIII_CLKSEL_DSP			(3 << 0)	/* c5x - 177.3MHz */
+#define RIII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 88.67MHz */
+#define RIII_SYNC_DSP			(1 << 7)	/* Enable sync */
+#define RIII_CLKSEL_IVA			(6 << 8)	/* iva1 - 88.67MHz */
+#define RIII_SYNC_IVA			(1 << 13)	/* Enable sync */
+#define RIII_CM_CLKSEL_DSP_VAL		RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
+					RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
+					RIII_CLKSEL_DSP
+#define RIII_CLKSEL_GFX			(2 << 0)	/* 66.5MHz */
+#define RIII_CM_CLKSEL_GFX_VAL		RIII_CLKSEL_GFX
+
+/* 2420-PRCM II 600MHz core */
+#define RII_CLKSEL_L3			(6 << 0)	/* 100MHz */
+#define RII_CLKSEL_L4			(2 << 5)	/* 50MHz */
+#define RII_CLKSEL_USB			(2 << 25)	/* 50MHz */
+#define RII_CM_CLKSEL1_CORE_VAL		RII_CLKSEL_USB | \
+					RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					RII_CLKSEL_L4 | RII_CLKSEL_L3
+#define RII_CLKSEL_MPU			(2 << 0)	/* 300MHz */
+#define RII_CM_CLKSEL_MPU_VAL		RII_CLKSEL_MPU
+#define RII_CLKSEL_DSP			(3 << 0)	/* c5x - 200MHz */
+#define RII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 100MHz */
+#define RII_SYNC_DSP			(0 << 7)	/* Bypass sync */
+#define RII_CLKSEL_IVA			(3 << 8)	/* iva1 - 200MHz */
+#define RII_SYNC_IVA			(0 << 13)	/* Bypass sync */
+#define RII_CM_CLKSEL_DSP_VAL		RII_SYNC_IVA | RII_CLKSEL_IVA | \
+					RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
+					RII_CLKSEL_DSP
+#define RII_CLKSEL_GFX			(2 << 0)	/* 50MHz */
+#define RII_CM_CLKSEL_GFX_VAL		RII_CLKSEL_GFX
+
+/* 2420-PRCM I 660MHz core */
+#define RI_CLKSEL_L3			(4 << 0)	/* 165MHz */
+#define RI_CLKSEL_L4			(2 << 5)	/* 82.5MHz */
+#define RI_CLKSEL_USB			(4 << 25)	/* 41.25MHz */
+#define RI_CM_CLKSEL1_CORE_VAL		RI_CLKSEL_USB | \
+					RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					RI_CLKSEL_L4 | RI_CLKSEL_L3
+#define RI_CLKSEL_MPU			(2 << 0)	/* 330MHz */
+#define RI_CM_CLKSEL_MPU_VAL		RI_CLKSEL_MPU
+#define RI_CLKSEL_DSP			(3 << 0)	/* c5x - 220MHz */
+#define RI_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 110MHz */
+#define RI_SYNC_DSP			(1 << 7)	/* Activate sync */
+#define RI_CLKSEL_IVA			(4 << 8)	/* iva1 - 165MHz */
+#define RI_SYNC_IVA			(0 << 13)	/* Bypass sync */
+#define RI_CM_CLKSEL_DSP_VAL		RI_SYNC_IVA | RI_CLKSEL_IVA | \
+					RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \
+					RI_CLKSEL_DSP
+#define RI_CLKSEL_GFX			(1 << 0)	/* 165MHz */
+#define RI_CM_CLKSEL_GFX_VAL		RI_CLKSEL_GFX
+
+/* 2420-PRCM VII (boot) */
+#define RVII_CLKSEL_L3			(1 << 0)
+#define RVII_CLKSEL_L4			(1 << 5)
+#define RVII_CLKSEL_DSS1		(1 << 8)
+#define RVII_CLKSEL_DSS2		(0 << 13)
+#define RVII_CLKSEL_VLYNQ		(1 << 15)
+#define RVII_CLKSEL_SSI			(1 << 20)
+#define RVII_CLKSEL_USB			(1 << 25)
+
+#define RVII_CM_CLKSEL1_CORE_VAL	RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
+					RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \
+					RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3
+
+#define RVII_CLKSEL_MPU			(1 << 0) /* all divide by 1 */
+#define RVII_CM_CLKSEL_MPU_VAL		RVII_CLKSEL_MPU
+
+#define RVII_CLKSEL_DSP			(1 << 0)
+#define RVII_CLKSEL_DSP_IF		(1 << 5)
+#define RVII_SYNC_DSP			(0 << 7)
+#define RVII_CLKSEL_IVA			(1 << 8)
+#define RVII_SYNC_IVA			(0 << 13)
+#define RVII_CM_CLKSEL_DSP_VAL		RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \
+					RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP
+
+#define RVII_CLKSEL_GFX			(1 << 0)
+#define RVII_CM_CLKSEL_GFX_VAL		RVII_CLKSEL_GFX
+
+/*-------------------------------------------------------------------------
+ * 2430 Target modes: Along with each configuration the CPU has several
+ * modes which goes along with them. Modes mainly are the addition of
+ * describe DPLL combinations to go along with a ratio.
+ *-------------------------------------------------------------------------*/
+
+/* Hardware governed */
+#define MX_48M_SRC			(0 << 3)
+#define MX_54M_SRC			(0 << 5)
+#define MX_APLLS_CLIKIN_12		(3 << 23)
+#define MX_APLLS_CLIKIN_13		(2 << 23)
+#define MX_APLLS_CLIKIN_19_2		(0 << 23)
+
+/*
+ * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
+ * #5a	(ratio1) baseport-target, target DPLL = 266*2 = 532MHz
+ */
+#define M5A_DPLL_MULT_12		(133 << 12)
+#define M5A_DPLL_DIV_12			(5 << 8)
+#define M5A_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define M5A_DPLL_MULT_13		(61 << 12)
+#define M5A_DPLL_DIV_13			(2 << 8)
+#define M5A_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+#define M5A_DPLL_MULT_19		(55 << 12)
+#define M5A_DPLL_DIV_19			(3 << 8)
+#define M5A_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
+					MX_APLLS_CLIKIN_19_2
+/* #5b	(ratio1) target DPLL = 200*2 = 400MHz */
+#define M5B_DPLL_MULT_12		(50 << 12)
+#define M5B_DPLL_DIV_12			(2 << 8)
+#define M5B_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define M5B_DPLL_MULT_13		(200 << 12)
+#define M5B_DPLL_DIV_13			(12 << 8)
+
+#define M5B_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+#define M5B_DPLL_MULT_19		(125 << 12)
+#define M5B_DPLL_DIV_19			(31 << 8)
+#define M5B_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
+					MX_APLLS_CLIKIN_19_2
+/*
+ * #4	(ratio2), DPLL = 399*2 = 798MHz, L3=133MHz
+ */
+#define M4_DPLL_MULT_12			(133 << 12)
+#define M4_DPLL_DIV_12			(3 << 8)
+#define M4_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+
+#define M4_DPLL_MULT_13			(399 << 12)
+#define M4_DPLL_DIV_13			(12 << 8)
+#define M4_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+
+#define M4_DPLL_MULT_19			(145 << 12)
+#define M4_DPLL_DIV_19			(6 << 8)
+#define M4_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \
+					MX_APLLS_CLIKIN_19_2
+
+/*
+ * #3	(ratio2) baseport-target, target DPLL = 330*2 = 660MHz
+ */
+#define M3_DPLL_MULT_12			(55 << 12)
+#define M3_DPLL_DIV_12			(1 << 8)
+#define M3_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define M3_DPLL_MULT_13			(76 << 12)
+#define M3_DPLL_DIV_13			(2 << 8)
+#define M3_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+#define M3_DPLL_MULT_19			(17 << 12)
+#define M3_DPLL_DIV_19			(0 << 8)
+#define M3_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
+					MX_APLLS_CLIKIN_19_2
+
+/*
+ * #2   (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz
+ */
+#define M2_DPLL_MULT_12		        (55 << 12)
+#define M2_DPLL_DIV_12		        (1 << 8)
+#define M2_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+
+/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2,
+ * relock time issue */
+/* Core frequency changed from 330/165 to 329/164 MHz*/
+#define M2_DPLL_MULT_13		        (76 << 12)
+#define M2_DPLL_DIV_13		        (2 << 8)
+#define M2_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+
+#define M2_DPLL_MULT_19		        (17 << 12)
+#define M2_DPLL_DIV_19		        (0 << 8)
+#define M2_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \
+					MX_APLLS_CLIKIN_19_2
+
+/* boot (boot) */
+#define MB_DPLL_MULT			(1 << 12)
+#define MB_DPLL_DIV			(0 << 8)
+#define MB_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
+					MB_DPLL_MULT | MX_APLLS_CLIKIN_12
+
+#define MB_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
+					MB_DPLL_MULT | MX_APLLS_CLIKIN_13
+
+#define MB_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
+					MB_DPLL_MULT | MX_APLLS_CLIKIN_19
+
+/*
+ * 2430 - chassis (sedna)
+ * 165 (ratio1) same as above #2
+ * 150 (ratio1)
+ * 133 (ratio2) same as above #4
+ * 110 (ratio2) same as above #3
+ * 104 (ratio2)
+ * boot (boot)
+ */
+
+/* PRCM I target DPLL = 2*330MHz = 660MHz */
+#define MI_DPLL_MULT_12			(55 << 12)
+#define MI_DPLL_DIV_12			(1 << 8)
+#define MI_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+
+/*
+ * 2420 Equivalent - mode registers
+ * PRCM II , target DPLL = 2*300MHz = 600MHz
+ */
+#define MII_DPLL_MULT_12		(50 << 12)
+#define MII_DPLL_DIV_12			(1 << 8)
+#define MII_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define MII_DPLL_MULT_13		(300 << 12)
+#define MII_DPLL_DIV_13			(12 << 8)
+#define MII_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+
+/* PRCM III target DPLL = 2*266 = 532MHz*/
+#define MIII_DPLL_MULT_12		(133 << 12)
+#define MIII_DPLL_DIV_12		(5 << 8)
+#define MIII_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define MIII_DPLL_MULT_13		(266 << 12)
+#define MIII_DPLL_DIV_13		(12 << 8)
+#define MIII_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+
+/* PRCM VII (boot bypass) */
+#define MVII_CM_CLKSEL1_PLL_12_VAL	MB_CM_CLKSEL1_PLL_12_VAL
+#define MVII_CM_CLKSEL1_PLL_13_VAL	MB_CM_CLKSEL1_PLL_13_VAL
+
+/* High and low operation value */
+#define MX_CLKSEL2_PLL_2x_VAL		(2 << 0)
+#define MX_CLKSEL2_PLL_1x_VAL		(1 << 0)
+
+/* MPU speed defines */
+#define S12M	12000000
+#define S13M	13000000
+#define S19M	19200000
+#define S26M	26000000
+#define S100M	100000000
+#define S133M	133000000
+#define S150M	150000000
+#define S164M	164000000
+#define S165M	165000000
+#define S199M	199000000
+#define S200M	200000000
+#define S266M	266000000
+#define S300M	300000000
+#define S329M	329000000
+#define S330M	330000000
+#define S399M	399000000
+#define S400M	400000000
+#define S532M	532000000
+#define S600M	600000000
+#define S658M	658000000
+#define S660M	660000000
+#define S798M	798000000
+
+/*-------------------------------------------------------------------------
+ * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
+ * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
+ * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ *
+ * Filling in table based on H4 boards and 2430-SDPs variants available.
+ * There are quite a few more rates combinations which could be defined.
+ *
+ * When multiple values are defined the start up will try and choose the
+ * fastest one. If a 'fast' value is defined, then automatically, the /2
+ * one should be included as it can be used.	Generally having more that
+ * one fast set does not make sense, as static timings need to be changed
+ * to change the set.	 The exception is the bypass setting which is
+ * availble for low power bypass.
+ *
+ * Note: This table needs to be sorted, fastest to slowest.
+ *-------------------------------------------------------------------------*/
+static struct prcm_config rate_table[] = {
+	/* PRCM I - FAST */
+	{S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
+		RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL,
+		RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz,
+		RATE_IN_242X},
+
+	/* PRCM II - FAST */
+	{S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	{S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	/* PRCM III - FAST */
+	{S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	{S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	/* PRCM II - SLOW */
+	{S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	{S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	/* PRCM III - SLOW */
+	{S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	{S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	/* PRCM-VII (boot-bypass) */
+	{S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL,		/* 12MHz ARM*/
+		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
+		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_242X},
+
+	/* PRCM-VII (boot-bypass) */
+	{S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL,		/* 13MHz ARM */
+		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
+		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_242X},
+
+	/* PRCM #4 - ratio2 (ES2.1) - FAST */
+	{S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL,		/* 399MHz ARM */
+		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
+		R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #2 - ratio1 (ES2) - FAST */
+	{S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_165MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5a - ratio1 - FAST */
+	{S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5b - ratio1 - FAST */
+	{S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL,		/* 200MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_100MHz,
+		RATE_IN_243X},
+
+	/* PRCM #4 - ratio1 (ES2.1) - SLOW */
+	{S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL,		/* 200MHz ARM */
+		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
+		R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #2 - ratio1 (ES2) - SLOW */
+	{S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL,		/* 165MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_165MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5a - ratio1 - SLOW */
+	{S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5b - ratio1 - SLOW*/
+	{S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL,		/* 100MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_100MHz,
+		RATE_IN_243X},
+
+	/* PRCM-boot/bypass */
+	{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL,		/* 13Mhz */
+		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
+		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_243X},
+
+	/* PRCM-boot/bypass */
+	{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL,		/* 12Mhz */
+		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
+		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_243X},
+
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+};
+
+/*-------------------------------------------------------------------------
+ * 24xx clock tree.
+ *
+ * NOTE:In many cases here we are assigning a 'default' parent.	In many
+ *	cases the parent is selectable.	The get/set parent calls will also
+ *	switch sources.
+ *
+ *	Many some clocks say always_enabled, but they can be auto idled for
+ *	power savings. They will always be available upon clock request.
+ *
+ *	Several sources are given initial rates which may be wrong, this will
+ *	be fixed up in the init func.
+ *
+ *	Things are broadly separated below by clock domains. It is
+ *	noteworthy that most periferals have dependencies on multiple clock
+ *	domains. Many get their interface clocks from the L4 domain, but get
+ *	functional clocks from fixed sources or other core domain derived
+ *	clocks.
+ *-------------------------------------------------------------------------*/
+
+/* Base external input clocks */
+static struct clk func_32k_ck = {
+	.name		= "func_32k_ck",
+	.rate		= 32000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+	.recalc		= &propagate_rate,
+};
+
+/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
+static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
+	.name		= "osc_ck",
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES,
+	.enable		= &omap2_enable_osc_ck,
+	.disable	= &omap2_disable_osc_ck,
+	.recalc		= &omap2_osc_clk_recalc,
+};
+
+/* With out modem likely 12MHz, with modem likely 13MHz */
+static struct clk sys_ck = {		/* (*12, *13, 19.2, 26, 38.4)MHz */
+	.name		= "sys_ck",		/* ~ ref_clk also */
+	.parent		= &osc_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				ALWAYS_ENABLED | RATE_PROPAGATES,
+	.recalc		= &omap2_sys_clk_recalc,
+};
+
+static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
+	.name		= "alt_ck",
+	.rate		= 54000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+	.recalc		= &propagate_rate,
+};
+
+/*
+ * Analog domain root source clocks
+ */
+
+/* dpll_ck, is broken out in to special cases through clksel */
+/* REVISIT: Rate changes on dpll_ck trigger a full set change.	...
+ * deal with this
+ */
+
+static const struct dpll_data dpll_dd = {
+	.mult_div1_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.mult_mask		= OMAP24XX_DPLL_MULT_MASK,
+	.div1_mask		= OMAP24XX_DPLL_DIV_MASK,
+};
+
+static struct clk dpll_ck = {
+	.name		= "dpll_ck",
+	.parent		= &sys_ck,		/* Can be func_32k also */
+	.dpll_data	= &dpll_dd,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap2_dpll_recalc,
+	.set_rate	= &omap2_reprogram_dpll,
+};
+
+static struct clk apll96_ck = {
+	.name		= "apll96_ck",
+	.parent		= &sys_ck,
+	.rate		= 96000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP24XX_EN_96M_PLL_SHIFT,
+	.enable		= &omap2_clk_fixed_enable,
+	.disable	= &omap2_clk_fixed_disable,
+	.recalc		= &propagate_rate,
+};
+
+static struct clk apll54_ck = {
+	.name		= "apll54_ck",
+	.parent		= &sys_ck,
+	.rate		= 54000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP24XX_EN_54M_PLL_SHIFT,
+	.enable		= &omap2_clk_fixed_enable,
+	.disable	= &omap2_clk_fixed_disable,
+	.recalc		= &propagate_rate,
+};
+
+/*
+ * PRCM digital base sources
+ */
+
+/* func_54m_ck */
+
+static const struct clksel_rate func_54m_apll54_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate func_54m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel func_54m_clksel[] = {
+	{ .parent = &apll54_ck, .rates = func_54m_apll54_rates, },
+	{ .parent = &alt_ck,	.rates = func_54m_alt_rates, },
+	{ .parent = NULL },
+};
+
+static struct clk func_54m_ck = {
+	.name		= "func_54m_ck",
+	.parent		= &apll54_ck,	/* can also be alt_clk */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_54M_SOURCE,
+	.clksel		= func_54m_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk core_ck = {
+	.name		= "core_ck",
+	.parent		= &dpll_ck,		/* can also be 32k */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				ALWAYS_ENABLED | RATE_PROPAGATES,
+	.recalc		= &followparent_recalc,
+};
+
+/* func_96m_ck */
+static const struct clksel_rate func_96m_apll96_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate func_96m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_243X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel func_96m_clksel[] = {
+	{ .parent = &apll96_ck,	.rates = func_96m_apll96_rates },
+	{ .parent = &alt_ck,	.rates = func_96m_alt_rates },
+	{ .parent = NULL }
+};
+
+/* The parent of this clock is not selectable on 2420. */
+static struct clk func_96m_ck = {
+	.name		= "func_96m_ck",
+	.parent		= &apll96_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP2430_96M_SOURCE,
+	.clksel		= func_96m_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/* func_48m_ck */
+
+static const struct clksel_rate func_48m_apll96_rates[] = {
+	{ .div = 2, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate func_48m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel func_48m_clksel[] = {
+	{ .parent = &apll96_ck,	.rates = func_48m_apll96_rates },
+	{ .parent = &alt_ck, .rates = func_48m_alt_rates },
+	{ .parent = NULL }
+};
+
+static struct clk func_48m_ck = {
+	.name		= "func_48m_ck",
+	.parent		= &apll96_ck,	 /* 96M or Alt */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_48M_SOURCE,
+	.clksel		= func_48m_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk func_12m_ck = {
+	.name		= "func_12m_ck",
+	.parent		= &func_48m_ck,
+	.fixed_div	= 4,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_fixed_divisor_recalc,
+};
+
+/* Secure timer, only available in secure mode */
+static struct clk wdt1_osc_ck = {
+	.name		= "ck_wdt1_osc",
+	.parent		= &osc_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * The common_clkout* clksel_rate structs are common to
+ * sys_clkout, sys_clkout_src, sys_clkout2, and sys_clkout2_src.
+ * sys_clkout2_* are 2420-only, so the
+ * clksel_rate flags fields are inaccurate for those clocks. This is
+ * harmless since access to those clocks are gated by the struct clk
+ * flags fields, which mark them as 2420-only.
+ */
+static const struct clksel_rate common_clkout_src_core_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_clkout_src_sys_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_clkout_src_96m_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_clkout_src_54m_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel common_clkout_src_clksel[] = {
+	{ .parent = &core_ck,	  .rates = common_clkout_src_core_rates },
+	{ .parent = &sys_ck,	  .rates = common_clkout_src_sys_rates },
+	{ .parent = &func_96m_ck, .rates = common_clkout_src_96m_rates },
+	{ .parent = &func_54m_ck, .rates = common_clkout_src_54m_rates },
+	{ .parent = NULL }
+};
+
+static struct clk sys_clkout_src = {
+	.name		= "sys_clkout_src",
+	.parent		= &func_54m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES,
+	.enable_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
+	.enable_bit	= OMAP24XX_CLKOUT_EN_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP24XX_CLKOUT_SOURCE_MASK,
+	.clksel		= common_clkout_src_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static const struct clksel_rate common_clkout_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 8, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 16, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 0 },
+};
+
+static const struct clksel sys_clkout_clksel[] = {
+	{ .parent = &sys_clkout_src, .rates = common_clkout_rates },
+	{ .parent = NULL }
+};
+
+static struct clk sys_clkout = {
+	.name		= "sys_clkout",
+	.parent		= &sys_clkout_src,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				PARENT_CONTROLS_CLOCK,
+	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP24XX_CLKOUT_DIV_MASK,
+	.clksel		= sys_clkout_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/* In 2430, new in 2420 ES2 */
+static struct clk sys_clkout2_src = {
+	.name		= "sys_clkout2_src",
+	.parent		= &func_54m_ck,
+	.flags		= CLOCK_IN_OMAP242X | RATE_PROPAGATES,
+	.enable_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
+	.enable_bit	= OMAP2420_CLKOUT2_EN_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP2420_CLKOUT2_SOURCE_MASK,
+	.clksel		= common_clkout_src_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static const struct clksel sys_clkout2_clksel[] = {
+	{ .parent = &sys_clkout2_src, .rates = common_clkout_rates },
+	{ .parent = NULL }
+};
+
+/* In 2430, new in 2420 ES2 */
+static struct clk sys_clkout2 = {
+	.name		= "sys_clkout2",
+	.parent		= &sys_clkout2_src,
+	.flags		= CLOCK_IN_OMAP242X | PARENT_CONTROLS_CLOCK,
+	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP2420_CLKOUT2_DIV_MASK,
+	.clksel		= sys_clkout2_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk emul_ck = {
+	.name		= "emul_ck",
+	.parent		= &func_54m_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP24XX_PRCM_CLKEMUL_CTRL,
+	.enable_bit	= OMAP24XX_EMULATION_EN_SHIFT,
+	.recalc		= &followparent_recalc,
+
+};
+
+/*
+ * MPU clock domain
+ *	Clocks:
+ *		MPU_FCLK, MPU_ICLK
+ *		INT_M_FCLK, INT_M_I_CLK
+ *
+ * - Individual clocks are hardware managed.
+ * - Base divider comes from: CM_CLKSEL_MPU
+ *
+ */
+static const struct clksel_rate mpu_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_242X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 0 },
+};
+
+static const struct clksel mpu_clksel[] = {
+	{ .parent = &core_ck, .rates = mpu_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mpu_ck = {	/* Control cpu */
+	.name		= "mpu_ck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				ALWAYS_ENABLED | DELAYED_APP |
+				CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP24XX_CLKSEL_MPU_MASK,
+	.clksel		= mpu_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate     = &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/*
+ * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain
+ * Clocks:
+ *	2430: IVA2.1_FCLK (really just DSP_FCLK), IVA2.1_ICLK
+ *	2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP
+ *
+ * Won't be too specific here. The core clock comes into this block
+ * it is divided then tee'ed. One branch goes directly to xyz enable
+ * controls. The other branch gets further divided by 2 then possibly
+ * routed into a synchronizer and out of clocks abc.
+ */
+static const struct clksel_rate dsp_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
+	{ .div = 0 },
+};
+
+static const struct clksel dsp_fck_clksel[] = {
+	{ .parent = &core_ck, .rates = dsp_fck_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dsp_fck = {
+	.name		= "dsp_fck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP |
+				CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSP_MASK,
+	.clksel		= dsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/* DSP interface clock */
+static const struct clksel_rate dsp_irate_ick_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_243X },
+	{ .div = 0 },
+};
+
+static const struct clksel dsp_irate_ick_clksel[] = {
+	{ .parent = &dsp_fck, .rates = dsp_irate_ick_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * This clock does not exist as such in the TRM, but is added to
+ * separate source selection from  XXX
+ */
+static struct clk dsp_irate_ick = {
+	.name		= "dsp_irate_ick",
+	.parent		= &dsp_fck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP |
+				CONFIG_PARTICIPANT | PARENT_CONTROLS_CLOCK,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSP_IF_MASK,
+	.clksel		= dsp_irate_ick_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	      = &omap2_clksel_set_rate
+};
+
+/* 2420 only */
+static struct clk dsp_ick = {
+	.name		= "dsp_ick",	 /* apparently ipi and isp */
+	.parent		= &dsp_irate_ick,
+	.flags		= CLOCK_IN_OMAP242X | DELAYED_APP | CONFIG_PARTICIPANT,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP2420_EN_DSP_IPI_SHIFT,	      /* for ipi */
+};
+
+/* 2430 only - EN_DSP controls both dsp fclk and iclk on 2430 */
+static struct clk iva2_1_ick = {
+	.name		= "iva2_1_ick",
+	.parent		= &dsp_irate_ick,
+	.flags		= CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
+};
+
+static struct clk iva1_ifck = {
+	.name		= "iva1_ifck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CONFIG_PARTICIPANT |
+				RATE_PROPAGATES | DELAYED_APP,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP2420_EN_IVA_COP_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP2420_CLKSEL_IVA_MASK,
+	.clksel		= dsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/* IVA1 mpu/int/i/f clocks are /2 of parent */
+static struct clk iva1_mpu_int_ifck = {
+	.name		= "iva1_mpu_int_ifck",
+	.parent		= &iva1_ifck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP2420_EN_IVA_MPU_SHIFT,
+	.fixed_div	= 2,
+	.recalc		= &omap2_fixed_divisor_recalc,
+};
+
+/*
+ * L3 clock domain
+ * L3 clocks are used for both interface and functional clocks to
+ * multiple entities. Some of these clocks are completely managed
+ * by hardware, and some others allow software control. Hardware
+ * managed ones general are based on directly CLK_REQ signals and
+ * various auto idle settings. The functional spec sets many of these
+ * as 'tie-high' for their enables.
+ *
+ * I-CLOCKS:
+ *	L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA
+ *	CAM, HS-USB.
+ * F-CLOCK
+ *	SSI.
+ *
+ * GPMC memories and SDRC have timing and clock sensitive registers which
+ * may very well need notification when the clock changes. Currently for low
+ * operating points, these are taken care of in sleep.S.
+ */
+static const struct clksel_rate core_l3_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_242X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
+	{ .div = 16, .val = 16, .flags = RATE_IN_242X },
+	{ .div = 0 }
+};
+
+static const struct clksel core_l3_clksel[] = {
+	{ .parent = &core_ck, .rates = core_l3_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk core_l3_ck = {	/* Used for ick and fck, interconnect */
+	.name		= "core_l3_ck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				ALWAYS_ENABLED | DELAYED_APP |
+				CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_L3_MASK,
+	.clksel		= core_l3_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/* usb_l4_ick */
+static const struct clksel_rate usb_l4_ick_core_l3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel usb_l4_ick_clksel[] = {
+	{ .parent = &core_l3_ck, .rates = usb_l4_ick_core_l3_rates },
+	{ .parent = NULL },
+};
+
+static struct clk usb_l4_ick = {	/* FS-USB interface clock */
+	.name		= "usb_l4_ick",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				DELAYED_APP | CONFIG_PARTICIPANT,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_USB_MASK,
+	.clksel		= usb_l4_ick_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/*
+ * SSI is in L3 management domain, its direct parent is core not l3,
+ * many core power domain entities are grouped into the L3 clock
+ * domain.
+ * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_CLIK
+ *
+ * ssr = core/1/2/3/4/5, sst = 1/2 ssr.
+ */
+static const struct clksel_rate ssi_ssr_sst_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 5, .val = 5, .flags = RATE_IN_243X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 0 }
+};
+
+static const struct clksel ssi_ssr_sst_fck_clksel[] = {
+	{ .parent = &core_ck, .rates = ssi_ssr_sst_fck_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk ssi_ssr_sst_fck = {
+	.name		= "ssi_fck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				DELAYED_APP,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_SSI_MASK,
+	.clksel		= ssi_ssr_sst_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/*
+ * GFX clock domain
+ *	Clocks:
+ * GFX_FCLK, GFX_ICLK
+ * GFX_CG1(2d), GFX_CG2(3d)
+ *
+ * GFX_FCLK runs from L3, and is divided by (1,2,3,4)
+ * The 2d and 3d clocks run at a hardware determined
+ * divided value of fclk.
+ *
+ */
+/* XXX REVISIT: GFX clock is part of CONFIG_PARTICIPANT, no? doublecheck. */
+
+/* This clksel struct is shared between gfx_3d_fck and gfx_2d_fck */
+static const struct clksel gfx_fck_clksel[] = {
+	{ .parent = &core_l3_ck, .rates = gfx_l3_rates },
+	{ .parent = NULL },
+};
+
+static struct clk gfx_3d_fck = {
+	.name		= "gfx_3d_fck",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_3D_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
+	.clksel		= gfx_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk gfx_2d_fck = {
+	.name		= "gfx_2d_fck",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_2D_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
+	.clksel		= gfx_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk gfx_ick = {
+	.name		= "gfx_ick",		/* From l3 */
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP_EN_GFX_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * Modem clock domain (2430)
+ *	CLOCKS:
+ *		MDM_OSC_CLK
+ *		MDM_ICLK
+ * These clocks are usable in chassis mode only.
+ */
+static const struct clksel_rate mdm_ick_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_243X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_243X | DEFAULT_RATE },
+	{ .div = 6, .val = 6, .flags = RATE_IN_243X },
+	{ .div = 9, .val = 9, .flags = RATE_IN_243X },
+	{ .div = 0 }
+};
+
+static const struct clksel mdm_ick_clksel[] = {
+	{ .parent = &core_ck, .rates = mdm_ick_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mdm_ick = {		/* used both as a ick and fck */
+	.name		= "mdm_ick",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP2430_CLKSEL_MDM_MASK,
+	.clksel		= mdm_ick_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk mdm_osc_ck = {
+	.name		= "mdm_osc_ck",
+	.parent		= &osc_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP2430_EN_OSC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * L4 clock management domain
+ *
+ * This domain contains lots of interface clocks from the L4 interface, some
+ * functional clocks.	Fixed APLL functional source clocks are managed in
+ * this domain.
+ */
+static const struct clksel_rate l4_core_l3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel l4_clksel[] = {
+	{ .parent = &core_l3_ck, .rates = l4_core_l3_rates },
+	{ .parent = NULL }
+};
+
+static struct clk l4_ck = {		/* used both as an ick and fck */
+	.name		= "l4_ck",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				ALWAYS_ENABLED | DELAYED_APP | RATE_PROPAGATES,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_L4_MASK,
+	.clksel		= l4_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk ssi_l4_ick = {
+	.name		= "ssi_l4_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * DSS clock domain
+ * CLOCKs:
+ * DSS_L4_ICLK, DSS_L3_ICLK,
+ * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK
+ *
+ * DSS is both initiator and target.
+ */
+/* XXX Add RATE_NOT_VALIDATED */
+
+static const struct clksel_rate dss1_fck_sys_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate dss1_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 5, .val = 5, .flags = RATE_IN_24XX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
+	{ .div = 8, .val = 8, .flags = RATE_IN_24XX },
+	{ .div = 9, .val = 9, .flags = RATE_IN_24XX },
+	{ .div = 12, .val = 12, .flags = RATE_IN_24XX },
+	{ .div = 16, .val = 16, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel dss1_fck_clksel[] = {
+	{ .parent = &sys_ck,  .rates = dss1_fck_sys_rates },
+	{ .parent = &core_ck, .rates = dss1_fck_core_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
+	.name		= "dss_ick",
+	.parent		= &l4_ck,	/* really both l3 and l4 */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss1_fck = {
+	.name		= "dss1_fck",
+	.parent		= &core_ck,		/* Core or sys */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				DELAYED_APP,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSS1_MASK,
+	.clksel		= dss1_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static const struct clksel_rate dss2_fck_sys_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate dss2_fck_48m_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel dss2_fck_clksel[] = {
+	{ .parent = &sys_ck,	  .rates = dss2_fck_sys_rates },
+	{ .parent = &func_48m_ck, .rates = dss2_fck_48m_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dss2_fck = {		/* Alt clk used in power management */
+	.name		= "dss2_fck",
+	.parent		= &sys_ck,		/* fixed at sys_ck or 48MHz */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				DELAYED_APP,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_DSS2_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSS2_MASK,
+	.clksel		= dss2_fck_clksel,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_54m_fck = {	/* Alt clk used in power management */
+	.name		= "dss_54m_fck",	/* 54m tv clk */
+	.parent		= &func_54m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_TV_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * CORE power domain ICLK & FCLK defines.
+ * Many of the these can have more than one possible parent. Entries
+ * here will likely have an L4 interface parent, and may have multiple
+ * functional clock parents.
+ */
+static const struct clksel_rate gpt_alt_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel omap24xx_gpt_clksel[] = {
+	{ .parent = &func_32k_ck, .rates = gpt_32k_rates },
+	{ .parent = &sys_ck,	  .rates = gpt_sys_rates },
+	{ .parent = &alt_ck,	  .rates = gpt_alt_rates },
+	{ .parent = NULL },
+};
+
+static struct clk gpt1_ick = {
+	.name		= "gpt1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt1_fck = {
+	.name		= "gpt1_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT1_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk gpt2_ick = {
+	.name		= "gpt2_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt2_fck = {
+	.name		= "gpt2_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT2_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt3_ick = {
+	.name		= "gpt3_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt3_fck = {
+	.name		= "gpt3_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT3_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt4_ick = {
+	.name		= "gpt4_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt4_fck = {
+	.name		= "gpt4_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT4_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt5_ick = {
+	.name		= "gpt5_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt5_fck = {
+	.name		= "gpt5_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT5_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt6_ick = {
+	.name		= "gpt6_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt6_fck = {
+	.name		= "gpt6_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT6_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt7_ick = {
+	.name		= "gpt7_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt7_fck = {
+	.name		= "gpt7_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT7_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt8_ick = {
+	.name		= "gpt8_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt8_fck = {
+	.name		= "gpt8_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT8_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt9_ick = {
+	.name		= "gpt9_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt9_fck = {
+	.name		= "gpt9_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT9_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt10_ick = {
+	.name		= "gpt10_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt10_fck = {
+	.name		= "gpt10_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT10_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt11_ick = {
+	.name		= "gpt11_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt11_fck = {
+	.name		= "gpt11_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT11_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt12_ick = {
+	.name		= "gpt12_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt12_fck = {
+	.name		= "gpt12_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT12_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp1_ick = {
+	.name		= "mcbsp1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp1_fck = {
+	.name		= "mcbsp1_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp2_ick = {
+	.name		= "mcbsp2_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp2_fck = {
+	.name		= "mcbsp2_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp3_ick = {
+	.name		= "mcbsp3_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp3_fck = {
+	.name		= "mcbsp3_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp4_ick = {
+	.name		= "mcbsp4_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp4_fck = {
+	.name		= "mcbsp4_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp5_ick = {
+	.name		= "mcbsp5_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP5_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp5_fck = {
+	.name		= "mcbsp5_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP5_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_ick = {
+	.name		= "mcspi_ick",
+	.id		= 1,
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_fck = {
+	.name		= "mcspi_fck",
+	.id		= 1,
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_ick = {
+	.name		= "mcspi_ick",
+	.id		= 2,
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_fck = {
+	.name		= "mcspi_fck",
+	.id		= 2,
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi3_ick = {
+	.name		= "mcspi_ick",
+	.id		= 3,
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MCSPI3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi3_fck = {
+	.name		= "mcspi_fck",
+	.id		= 3,
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MCSPI3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_ick = {
+	.name		= "uart1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_fck = {
+	.name		= "uart1_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_ick = {
+	.name		= "uart2_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_fck = {
+	.name		= "uart2_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_ick = {
+	.name		= "uart3_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_fck = {
+	.name		= "uart3_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpios_ick = {
+	.name		= "gpios_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpios_fck = {
+	.name		= "gpios_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mpu_wdt_ick = {
+	.name		= "mpu_wdt_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mpu_wdt_fck = {
+	.name		= "mpu_wdt_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sync_32k_ick = {
+	.name		= "sync_32k_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_32KSYNC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+static struct clk wdt1_ick = {
+	.name		= "wdt1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_WDT1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+static struct clk omapctrl_ick = {
+	.name		= "omapctrl_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_OMAPCTRL_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+static struct clk icr_ick = {
+	.name		= "icr_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP2430_EN_ICR_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk cam_ick = {
+	.name		= "cam_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk cam_fck = {
+	.name		= "cam_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mailboxes_ick = {
+	.name		= "mailboxes_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MAILBOXES_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt4_ick = {
+	.name		= "wdt4_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt4_fck = {
+	.name		= "wdt4_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_ick = {
+	.name		= "wdt3_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_WDT3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_fck = {
+	.name		= "wdt3_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_WDT3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_ick = {
+	.name		= "mspro_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_fck = {
+	.name		= "mspro_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmc_ick = {
+	.name		= "mmc_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_MMC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmc_fck = {
+	.name		= "mmc_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_MMC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fac_ick = {
+	.name		= "fac_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fac_fck = {
+	.name		= "fac_fck",
+	.parent		= &func_12m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk eac_ick = {
+	.name		= "eac_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_EAC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk eac_fck = {
+	.name		= "eac_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_EAC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_ick = {
+	.name		= "hdq_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_fck = {
+	.name		= "hdq_fck",
+	.parent		= &func_12m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_ick = {
+	.name		= "i2c_ick",
+	.id		= 2,
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_I2C2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_fck = {
+	.name		= "i2c_fck",
+	.id		= 2,
+	.parent		= &func_12m_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_I2C2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2chs2_fck = {
+	.name		= "i2chs_fck",
+	.id		= 2,
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_I2CHS2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c1_ick = {
+	.name		= "i2c_ick",
+	.id		= 1,
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_I2C1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c1_fck = {
+	.name		= "i2c_fck",
+	.id		= 1,
+	.parent		= &func_12m_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_I2C1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2chs1_fck = {
+	.name		= "i2chs_fck",
+	.id		= 1,
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_I2CHS1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpmc_fck = {
+	.name		= "gpmc_fck",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sdma_fck = {
+	.name		= "sdma_fck",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sdma_ick = {
+	.name		= "sdma_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk vlynq_ick = {
+	.name		= "vlynq_ick",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_VLYNQ_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel_rate vlynq_fck_96m_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_242X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate vlynq_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_242X },
+	{ .div = 2, .val = 2, .flags = RATE_IN_242X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_242X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_242X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 9, .val = 9, .flags = RATE_IN_242X },
+	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
+	{ .div = 16, .val = 16, .flags = RATE_IN_242X | DEFAULT_RATE },
+	{ .div = 18, .val = 18, .flags = RATE_IN_242X },
+	{ .div = 0 }
+};
+
+static const struct clksel vlynq_fck_clksel[] = {
+	{ .parent = &func_96m_ck, .rates = vlynq_fck_96m_rates },
+	{ .parent = &core_ck,	  .rates = vlynq_fck_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk vlynq_fck = {
+	.name		= "vlynq_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | DELAYED_APP,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_VLYNQ_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP2420_CLKSEL_VLYNQ_MASK,
+	.clksel		= vlynq_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk sdrc_ick = {
+	.name		= "sdrc_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
+	.enable_bit	= OMAP2430_EN_SDRC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk des_ick = {
+	.name		= "des_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_DES_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sha_ick = {
+	.name		= "sha_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_SHA_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk rng_ick = {
+	.name		= "rng_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_RNG_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk aes_ick = {
+	.name		= "aes_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_AES_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk pka_ick = {
+	.name		= "pka_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_PKA_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usb_fck = {
+	.name		= "usb_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbhs_ick = {
+	.name		= "usbhs_ick",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_USBHS_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs1_ick = {
+	.name		= "mmchs_ick",
+	.id		= 1,
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHS1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs1_fck = {
+	.name		= "mmchs_fck",
+	.id		= 1,
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHS1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs2_ick = {
+	.name		= "mmchs_ick",
+	.id		= 2,
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHS2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs2_fck = {
+	.name		= "mmchs_fck",
+	.id		= 2,
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHS2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio5_ick = {
+	.name		= "gpio5_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_GPIO5_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio5_fck = {
+	.name		= "gpio5_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_GPIO5_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mdm_intc_ick = {
+	.name		= "mdm_intc_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MDM_INTC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchsdb1_fck = {
+	.name		= "mmchsdb_fck",
+	.id		= 1,
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHSDB1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchsdb2_fck = {
+	.name		= "mmchsdb_fck",
+	.id		= 2,
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHSDB2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * This clock is a composite clock which does entire set changes then
+ * forces a rebalance. It keys on the MPU speed, but it really could
+ * be any key speed part of a set in the rate table.
+ *
+ * to really change a set, you need memory table sets which get changed
+ * in sram, pre-notifiers & post notifiers, changing the top set, without
+ * having low level display recalc's won't work... this is why dpm notifiers
+ * work, isr's off, walk a list of clocks already _off_ and not messing with
+ * the bus.
+ *
+ * This clock should have no parent. It embodies the entire upper level
+ * active set. A parent will mess up some of the init also.
+ */
+static struct clk virt_prcm_set = {
+	.name		= "virt_prcm_set",
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP,
+	.parent		= &mpu_ck,	/* Indexed by mpu speed, no parent */
+	.recalc		= &omap2_table_mpu_recalc,	/* sets are keyed on mpu rate */
+	.set_rate	= &omap2_select_table_rate,
+	.round_rate	= &omap2_round_to_table_rate,
+};
+
+static struct clk *onchip_24xx_clks[] __initdata = {
+	/* external root sources */
+	&func_32k_ck,
+	&osc_ck,
+	&sys_ck,
+	&alt_ck,
+	/* internal analog sources */
+	&dpll_ck,
+	&apll96_ck,
+	&apll54_ck,
+	/* internal prcm root sources */
+	&func_54m_ck,
+	&core_ck,
+	&func_96m_ck,
+	&func_48m_ck,
+	&func_12m_ck,
+	&wdt1_osc_ck,
+	&sys_clkout_src,
+	&sys_clkout,
+	&sys_clkout2_src,
+	&sys_clkout2,
+	&emul_ck,
+	/* mpu domain clocks */
+	&mpu_ck,
+	/* dsp domain clocks */
+	&dsp_fck,
+	&dsp_irate_ick,
+	&dsp_ick,		/* 242x */
+	&iva2_1_ick,		/* 243x */
+	&iva1_ifck,		/* 242x */
+	&iva1_mpu_int_ifck,	/* 242x */
+	/* GFX domain clocks */
+	&gfx_3d_fck,
+	&gfx_2d_fck,
+	&gfx_ick,
+	/* Modem domain clocks */
+	&mdm_ick,
+	&mdm_osc_ck,
+	/* DSS domain clocks */
+	&dss_ick,
+	&dss1_fck,
+	&dss2_fck,
+	&dss_54m_fck,
+	/* L3 domain clocks */
+	&core_l3_ck,
+	&ssi_ssr_sst_fck,
+	&usb_l4_ick,
+	/* L4 domain clocks */
+	&l4_ck,			/* used as both core_l4 and wu_l4 */
+	&ssi_l4_ick,
+	/* virtual meta-group clock */
+	&virt_prcm_set,
+	/* general l4 interface ck, multi-parent functional clk */
+	&gpt1_ick,
+	&gpt1_fck,
+	&gpt2_ick,
+	&gpt2_fck,
+	&gpt3_ick,
+	&gpt3_fck,
+	&gpt4_ick,
+	&gpt4_fck,
+	&gpt5_ick,
+	&gpt5_fck,
+	&gpt6_ick,
+	&gpt6_fck,
+	&gpt7_ick,
+	&gpt7_fck,
+	&gpt8_ick,
+	&gpt8_fck,
+	&gpt9_ick,
+	&gpt9_fck,
+	&gpt10_ick,
+	&gpt10_fck,
+	&gpt11_ick,
+	&gpt11_fck,
+	&gpt12_ick,
+	&gpt12_fck,
+	&mcbsp1_ick,
+	&mcbsp1_fck,
+	&mcbsp2_ick,
+	&mcbsp2_fck,
+	&mcbsp3_ick,
+	&mcbsp3_fck,
+	&mcbsp4_ick,
+	&mcbsp4_fck,
+	&mcbsp5_ick,
+	&mcbsp5_fck,
+	&mcspi1_ick,
+	&mcspi1_fck,
+	&mcspi2_ick,
+	&mcspi2_fck,
+	&mcspi3_ick,
+	&mcspi3_fck,
+	&uart1_ick,
+	&uart1_fck,
+	&uart2_ick,
+	&uart2_fck,
+	&uart3_ick,
+	&uart3_fck,
+	&gpios_ick,
+	&gpios_fck,
+	&mpu_wdt_ick,
+	&mpu_wdt_fck,
+	&sync_32k_ick,
+	&wdt1_ick,
+	&omapctrl_ick,
+	&icr_ick,
+	&cam_fck,
+	&cam_ick,
+	&mailboxes_ick,
+	&wdt4_ick,
+	&wdt4_fck,
+	&wdt3_ick,
+	&wdt3_fck,
+	&mspro_ick,
+	&mspro_fck,
+	&mmc_ick,
+	&mmc_fck,
+	&fac_ick,
+	&fac_fck,
+	&eac_ick,
+	&eac_fck,
+	&hdq_ick,
+	&hdq_fck,
+	&i2c1_ick,
+	&i2c1_fck,
+	&i2chs1_fck,
+	&i2c2_ick,
+	&i2c2_fck,
+	&i2chs2_fck,
+	&gpmc_fck,
+	&sdma_fck,
+	&sdma_ick,
+	&vlynq_ick,
+	&vlynq_fck,
+	&sdrc_ick,
+	&des_ick,
+	&sha_ick,
+	&rng_ick,
+	&aes_ick,
+	&pka_ick,
+	&usb_fck,
+	&usbhs_ick,
+	&mmchs1_ick,
+	&mmchs1_fck,
+	&mmchs2_ick,
+	&mmchs2_fck,
+	&gpio5_ick,
+	&gpio5_fck,
+	&mdm_intc_ick,
+	&mmchsdb1_fck,
+	&mmchsdb2_fck,
+};
+
+#endif
+
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
new file mode 100644
index 0000000..b42bdd6
--- /dev/null
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -0,0 +1,235 @@
+/*
+ * OMAP3-specific clock framework functions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/sram.h>
+#include <asm/div64.h>
+#include <asm/bitops.h>
+
+#include "memory.h"
+#include "clock.h"
+#include "clock34xx.h"
+#include "prm.h"
+#include "prm-regbits-34xx.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+
+/* CM_CLKEN_PLL*.EN* bit values */
+#define DPLL_LOCKED		0x7
+
+/**
+ * omap3_dpll_recalc - recalculate DPLL rate
+ * @clk: DPLL struct clk
+ *
+ * Recalculate and propagate the DPLL rate.
+ */
+static void omap3_dpll_recalc(struct clk *clk)
+{
+	clk->rate = omap2_get_dpll_rate(clk);
+
+	propagate_rate(clk);
+}
+
+/**
+ * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
+ * @clk: DPLL output struct clk
+ *
+ * Using parent clock DPLL data, look up DPLL state.  If locked, set our
+ * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
+ */
+static void omap3_clkoutx2_recalc(struct clk *clk)
+{
+	const struct dpll_data *dd;
+	u32 v;
+	struct clk *pclk;
+
+	/* Walk up the parents of clk, looking for a DPLL */
+	pclk = clk->parent;
+	while (pclk && !pclk->dpll_data)
+		pclk = pclk->parent;
+
+	/* clk does not have a DPLL as a parent? */
+	WARN_ON(!pclk);
+
+	dd = pclk->dpll_data;
+
+	WARN_ON(!dd->control_reg || !dd->enable_mask);
+
+	v = __raw_readl(dd->control_reg) & dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+	if (v != DPLL_LOCKED)
+		clk->rate = clk->parent->rate;
+	else
+		clk->rate = clk->parent->rate * 2;
+
+	if (clk->flags & RATE_PROPAGATES)
+		propagate_rate(clk);
+}
+
+/*
+ * As it is structured now, this will prevent an OMAP2/3 multiboot
+ * kernel from compiling.  This will need further attention.
+ */
+#if defined(CONFIG_ARCH_OMAP3)
+
+static struct clk_functions omap2_clk_functions = {
+	.clk_enable		= omap2_clk_enable,
+	.clk_disable		= omap2_clk_disable,
+	.clk_round_rate		= omap2_clk_round_rate,
+	.clk_set_rate		= omap2_clk_set_rate,
+	.clk_set_parent		= omap2_clk_set_parent,
+	.clk_disable_unused	= omap2_clk_disable_unused,
+};
+
+/*
+ * Set clocks for bypass mode for reboot to work.
+ */
+void omap2_clk_prepare_for_reboot(void)
+{
+	/* REVISIT: Not ready for 343x */
+#if 0
+	u32 rate;
+
+	if (vclk == NULL || sclk == NULL)
+		return;
+
+	rate = clk_get_rate(sclk);
+	clk_set_rate(vclk, rate);
+#endif
+}
+
+/* REVISIT: Move this init stuff out into clock.c */
+
+/*
+ * Switch the MPU rate if specified on cmdline.
+ * We cannot do this early until cmdline is parsed.
+ */
+static int __init omap2_clk_arch_init(void)
+{
+	if (!mpurate)
+		return -EINVAL;
+
+	/* REVISIT: not yet ready for 343x */
+#if 0
+	if (omap2_select_table_rate(&virt_prcm_set, mpurate))
+		printk(KERN_ERR "Could not find matching MPU rate\n");
+#endif
+
+	recalculate_root_clocks();
+
+	printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL3/MPU): "
+	       "%ld.%01ld/%ld/%ld MHz\n",
+	       (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
+	       (core_ck.rate / 1000000), (dpll1_fck.rate / 1000000)) ;
+
+	return 0;
+}
+arch_initcall(omap2_clk_arch_init);
+
+int __init omap2_clk_init(void)
+{
+	/* struct prcm_config *prcm; */
+	struct clk **clkp;
+	/* u32 clkrate; */
+	u32 cpu_clkflg;
+
+	/* REVISIT: Ultimately this will be used for multiboot */
+#if 0
+	if (cpu_is_omap242x()) {
+		cpu_mask = RATE_IN_242X;
+		cpu_clkflg = CLOCK_IN_OMAP242X;
+		clkp = onchip_24xx_clks;
+	} else if (cpu_is_omap2430()) {
+		cpu_mask = RATE_IN_243X;
+		cpu_clkflg = CLOCK_IN_OMAP243X;
+		clkp = onchip_24xx_clks;
+	}
+#endif
+	if (cpu_is_omap34xx()) {
+		cpu_mask = RATE_IN_343X;
+		cpu_clkflg = CLOCK_IN_OMAP343X;
+		clkp = onchip_34xx_clks;
+
+		/*
+		 * Update this if there are further clock changes between ES2
+		 * and production parts
+		 */
+		if (is_sil_rev_equal_to(OMAP3430_REV_ES1_0)) {
+			/* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */
+			cpu_clkflg |= CLOCK_IN_OMAP3430ES1;
+		} else {
+			cpu_mask |= RATE_IN_3430ES2;
+			cpu_clkflg |= CLOCK_IN_OMAP3430ES2;
+		}
+	}
+
+	clk_init(&omap2_clk_functions);
+
+	for (clkp = onchip_34xx_clks;
+	     clkp < onchip_34xx_clks + ARRAY_SIZE(onchip_34xx_clks);
+	     clkp++) {
+		if ((*clkp)->flags & cpu_clkflg)
+			clk_register(*clkp);
+	}
+
+	/* REVISIT: Not yet ready for OMAP3 */
+#if 0
+	/* Check the MPU rate set by bootloader */
+	clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+		if (prcm->dpll_speed <= clkrate)
+			 break;
+	}
+	curr_prcm_set = prcm;
+#endif
+
+	recalculate_root_clocks();
+
+	printk(KERN_INFO "Clocking rate (Crystal/DPLL/ARM core): "
+	       "%ld.%01ld/%ld/%ld MHz\n",
+	       (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
+	       (core_ck.rate / 1000000), (arm_fck.rate / 1000000));
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_enable_init_clocks();
+
+	/* Avoid sleeping during omap2_clk_prepare_for_reboot() */
+	/* REVISIT: not yet ready for 343x */
+#if 0
+	vclk = clk_get(NULL, "virt_prcm_set");
+	sclk = clk_get(NULL, "sys_ck");
+#endif
+	return 0;
+}
+
+#endif
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
new file mode 100644
index 0000000..cf4644a
--- /dev/null
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -0,0 +1,3009 @@
+/*
+ * OMAP3 clock framework
+ *
+ * Virtual clocks are introduced as a convenient tools.
+ * They are sources for other clocks and not supposed
+ * to be requested from drivers directly.
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
+
+#include <asm/arch/control.h>
+
+#include "clock.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+#include "prm.h"
+#include "prm-regbits-34xx.h"
+
+static void omap3_dpll_recalc(struct clk *clk);
+static void omap3_clkoutx2_recalc(struct clk *clk);
+
+/*
+ * DPLL1 supplies clock to the MPU.
+ * DPLL2 supplies clock to the IVA2.
+ * DPLL3 supplies CORE domain clocks.
+ * DPLL4 supplies peripheral clocks.
+ * DPLL5 supplies other peripheral clocks (USBHOST, USIM).
+ */
+
+/* PRM CLOCKS */
+
+/* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */
+static struct clk omap_32k_fck = {
+	.name		= "omap_32k_fck",
+	.rate		= 32768,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+static struct clk secure_32k_fck = {
+	.name		= "secure_32k_fck",
+	.rate		= 32768,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+/* Virtual source clocks for osc_sys_ck */
+static struct clk virt_12m_ck = {
+	.name		= "virt_12m_ck",
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+static struct clk virt_13m_ck = {
+	.name		= "virt_13m_ck",
+	.rate		= 13000000,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+static struct clk virt_16_8m_ck = {
+	.name		= "virt_16_8m_ck",
+	.rate		= 16800000,
+	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+static struct clk virt_19_2m_ck = {
+	.name		= "virt_19_2m_ck",
+	.rate		= 19200000,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+static struct clk virt_26m_ck = {
+	.name		= "virt_26m_ck",
+	.rate		= 26000000,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+static struct clk virt_38_4m_ck = {
+	.name		= "virt_38_4m_ck",
+	.rate		= 38400000,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+static const struct clksel_rate osc_sys_12m_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_13m_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_16_8m_rates[] = {
+	{ .div = 1, .val = 5, .flags = RATE_IN_3430ES2 | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_19_2m_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_26m_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_38_4m_rates[] = {
+	{ .div = 1, .val = 4, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel osc_sys_clksel[] = {
+	{ .parent = &virt_12m_ck,   .rates = osc_sys_12m_rates },
+	{ .parent = &virt_13m_ck,   .rates = osc_sys_13m_rates },
+	{ .parent = &virt_16_8m_ck, .rates = osc_sys_16_8m_rates },
+	{ .parent = &virt_19_2m_ck, .rates = osc_sys_19_2m_rates },
+	{ .parent = &virt_26m_ck,   .rates = osc_sys_26m_rates },
+	{ .parent = &virt_38_4m_ck, .rates = osc_sys_38_4m_rates },
+	{ .parent = NULL },
+};
+
+/* Oscillator clock */
+/* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */
+static struct clk osc_sys_ck = {
+	.name		= "osc_sys_ck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP3430_PRM_CLKSEL,
+	.clksel_mask	= OMAP3430_SYS_CLKIN_SEL_MASK,
+	.clksel		= osc_sys_clksel,
+	/* REVISIT: deal with autoextclkmode? */
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate div2_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 0 }
+};
+
+static const struct clksel sys_clksel[] = {
+	{ .parent = &osc_sys_ck, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+/* Latency: this clock is only enabled after PRM_CLKSETUP.SETUP_TIME */
+/* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */
+static struct clk sys_ck = {
+	.name		= "sys_ck",
+	.parent		= &osc_sys_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP3430_PRM_CLKSRC_CTRL,
+	.clksel_mask	= OMAP_SYSCLKDIV_MASK,
+	.clksel		= sys_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk sys_altclk = {
+	.name		= "sys_altclk",
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+/* Optional external clock input for some McBSPs */
+static struct clk mcbsp_clks = {
+	.name		= "mcbsp_clks",
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+/* PRM EXTERNAL CLOCK OUTPUT */
+
+static struct clk sys_clkout1 = {
+	.name		= "sys_clkout1",
+	.parent		= &osc_sys_ck,
+	.enable_reg	= OMAP3430_PRM_CLKOUT_CTRL,
+	.enable_bit	= OMAP3430_CLKOUT_EN_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLLS */
+
+/* CM CLOCKS */
+
+static const struct clksel_rate dpll_bypass_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate dpll_locked_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate div16_dpll_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 5, .val = 5, .flags = RATE_IN_343X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
+	{ .div = 7, .val = 7, .flags = RATE_IN_343X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_343X },
+	{ .div = 9, .val = 9, .flags = RATE_IN_343X },
+	{ .div = 10, .val = 10, .flags = RATE_IN_343X },
+	{ .div = 11, .val = 11, .flags = RATE_IN_343X },
+	{ .div = 12, .val = 12, .flags = RATE_IN_343X },
+	{ .div = 13, .val = 13, .flags = RATE_IN_343X },
+	{ .div = 14, .val = 14, .flags = RATE_IN_343X },
+	{ .div = 15, .val = 15, .flags = RATE_IN_343X },
+	{ .div = 16, .val = 16, .flags = RATE_IN_343X },
+	{ .div = 0 }
+};
+
+/* DPLL1 */
+/* MPU clock source */
+/* Type: DPLL */
+static const struct dpll_data dpll1_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.mult_mask	= OMAP3430_MPU_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_MPU_DPLL_DIV_MASK,
+	.control_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
+	.enable_mask	= OMAP3430_EN_MPU_DPLL_MASK,
+	.auto_recal_bit	= OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_MPU_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_MPU_DPLL_ST_SHIFT,
+};
+
+static struct clk dpll1_ck = {
+	.name		= "dpll1_ck",
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll1_dd,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap3_dpll_recalc,
+};
+
+/*
+ * This virtual clock provides the CLKOUTX2 output from the DPLL if the
+ * DPLL isn't bypassed.
+ */
+static struct clk dpll1_x2_ck = {
+	.name		= "dpll1_x2_ck",
+	.parent		= &dpll1_ck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/* On DPLL1, unlike other DPLLs, the divider is downstream from CLKOUTX2 */
+static const struct clksel div16_dpll1_x2m2_clksel[] = {
+	{ .parent = &dpll1_x2_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * Does not exist in the TRM - needed to separate the M2 divider from
+ * bypass selection in mpu_ck
+ */
+static struct clk dpll1_x2m2_ck = {
+	.name		= "dpll1_x2m2_ck",
+	.parent		= &dpll1_x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL),
+	.clksel_mask	= OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK,
+	.clksel		= div16_dpll1_x2m2_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* DPLL2 */
+/* IVA2 clock source */
+/* Type: DPLL */
+
+static const struct dpll_data dpll2_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.mult_mask	= OMAP3430_IVA2_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_IVA2_DPLL_DIV_MASK,
+	.control_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
+	.enable_mask	= OMAP3430_EN_IVA2_DPLL_MASK,
+	.auto_recal_bit	= OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT,
+};
+
+static struct clk dpll2_ck = {
+	.name		= "dpll2_ck",
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll2_dd,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap3_dpll_recalc,
+};
+
+static const struct clksel div16_dpll2_m2x2_clksel[] = {
+	{ .parent = &dpll2_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * The TRM is conflicted on whether IVA2 clock comes from DPLL2 CLKOUT
+ * or CLKOUTX2. CLKOUT seems most plausible.
+ */
+static struct clk dpll2_m2_ck = {
+	.name		= "dpll2_m2_ck",
+	.parent		= &dpll2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
+					  OMAP3430_CM_CLKSEL2_PLL),
+	.clksel_mask	= OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK,
+	.clksel		= div16_dpll2_m2x2_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* DPLL3 */
+/* Source clock for all interfaces and for some device fclks */
+/* Type: DPLL */
+static const struct dpll_data dpll3_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.mult_mask	= OMAP3430_CORE_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_CORE_DPLL_DIV_MASK,
+	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_mask	= OMAP3430_EN_CORE_DPLL_MASK,
+	.auto_recal_bit	= OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_CORE_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_CORE_DPLL_ST_SHIFT,
+};
+
+static struct clk dpll3_ck = {
+	.name		= "dpll3_ck",
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll3_dd,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap3_dpll_recalc,
+};
+
+/*
+ * This virtual clock provides the CLKOUTX2 output from the DPLL if the
+ * DPLL isn't bypassed
+ */
+static struct clk dpll3_x2_ck = {
+	.name		= "dpll3_x2_ck",
+	.parent		= &dpll3_ck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel_rate div31_dpll3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_3430ES2 },
+	{ .div = 4, .val = 4, .flags = RATE_IN_3430ES2 },
+	{ .div = 5, .val = 5, .flags = RATE_IN_3430ES2 },
+	{ .div = 6, .val = 6, .flags = RATE_IN_3430ES2 },
+	{ .div = 7, .val = 7, .flags = RATE_IN_3430ES2 },
+	{ .div = 8, .val = 8, .flags = RATE_IN_3430ES2 },
+	{ .div = 9, .val = 9, .flags = RATE_IN_3430ES2 },
+	{ .div = 10, .val = 10, .flags = RATE_IN_3430ES2 },
+	{ .div = 11, .val = 11, .flags = RATE_IN_3430ES2 },
+	{ .div = 12, .val = 12, .flags = RATE_IN_3430ES2 },
+	{ .div = 13, .val = 13, .flags = RATE_IN_3430ES2 },
+	{ .div = 14, .val = 14, .flags = RATE_IN_3430ES2 },
+	{ .div = 15, .val = 15, .flags = RATE_IN_3430ES2 },
+	{ .div = 16, .val = 16, .flags = RATE_IN_3430ES2 },
+	{ .div = 17, .val = 17, .flags = RATE_IN_3430ES2 },
+	{ .div = 18, .val = 18, .flags = RATE_IN_3430ES2 },
+	{ .div = 19, .val = 19, .flags = RATE_IN_3430ES2 },
+	{ .div = 20, .val = 20, .flags = RATE_IN_3430ES2 },
+	{ .div = 21, .val = 21, .flags = RATE_IN_3430ES2 },
+	{ .div = 22, .val = 22, .flags = RATE_IN_3430ES2 },
+	{ .div = 23, .val = 23, .flags = RATE_IN_3430ES2 },
+	{ .div = 24, .val = 24, .flags = RATE_IN_3430ES2 },
+	{ .div = 25, .val = 25, .flags = RATE_IN_3430ES2 },
+	{ .div = 26, .val = 26, .flags = RATE_IN_3430ES2 },
+	{ .div = 27, .val = 27, .flags = RATE_IN_3430ES2 },
+	{ .div = 28, .val = 28, .flags = RATE_IN_3430ES2 },
+	{ .div = 29, .val = 29, .flags = RATE_IN_3430ES2 },
+	{ .div = 30, .val = 30, .flags = RATE_IN_3430ES2 },
+	{ .div = 31, .val = 31, .flags = RATE_IN_3430ES2 },
+	{ .div = 0 },
+};
+
+static const struct clksel div31_dpll3m2_clksel[] = {
+	{ .parent = &dpll3_ck, .rates = div31_dpll3_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * DPLL3 output M2
+ * REVISIT: This DPLL output divider must be changed in SRAM, so until
+ * that code is ready, this should remain a 'read-only' clksel clock.
+ */
+static struct clk dpll3_m2_ck = {
+	.name		= "dpll3_m2_ck",
+	.parent		= &dpll3_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK,
+	.clksel		= div31_dpll3m2_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel core_ck_clksel[] = {
+	{ .parent = &sys_ck,      .rates = dpll_bypass_rates },
+	{ .parent = &dpll3_m2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk core_ck = {
+	.name		= "core_ck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_CORE_CLK,
+	.clksel		= core_ck_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel dpll3_m2x2_ck_clksel[] = {
+	{ .parent = &sys_ck,      .rates = dpll_bypass_rates },
+	{ .parent = &dpll3_x2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dpll3_m2x2_ck = {
+	.name		= "dpll3_m2x2_ck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_CORE_CLK,
+	.clksel		= dpll3_m2x2_ck_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static const struct clksel div16_dpll3_clksel[] = {
+	{ .parent = &dpll3_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/* This virtual clock is the source for dpll3_m3x2_ck */
+static struct clk dpll3_m3_ck = {
+	.name		= "dpll3_m3_ck",
+	.parent		= &dpll3_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_DIV_DPLL3_MASK,
+	.clksel		= div16_dpll3_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll3_m3x2_ck = {
+	.name		= "dpll3_m3x2_ck",
+	.parent		= &dpll3_m3_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_EMU_CORE_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel emu_core_alwon_ck_clksel[] = {
+	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &dpll3_m3x2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk emu_core_alwon_ck = {
+	.name		= "emu_core_alwon_ck",
+	.parent		= &dpll3_m3x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_CORE_CLK,
+	.clksel		= emu_core_alwon_ck_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* DPLL4 */
+/* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */
+/* Type: DPLL */
+static const struct dpll_data dpll4_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
+	.mult_mask	= OMAP3430_PERIPH_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_PERIPH_DPLL_DIV_MASK,
+	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_mask	= OMAP3430_EN_PERIPH_DPLL_MASK,
+	.auto_recal_bit	= OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_PERIPH_DPLL_ST_SHIFT,
+};
+
+static struct clk dpll4_ck = {
+	.name		= "dpll4_ck",
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll4_dd,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap3_dpll_recalc,
+};
+
+/*
+ * This virtual clock provides the CLKOUTX2 output from the DPLL if the
+ * DPLL isn't bypassed --
+ * XXX does this serve any downstream clocks?
+ */
+static struct clk dpll4_x2_ck = {
+	.name		= "dpll4_x2_ck",
+	.parent		= &dpll4_ck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel div16_dpll4_clksel[] = {
+	{ .parent = &dpll4_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/* This virtual clock is the source for dpll4_m2x2_ck */
+static struct clk dpll4_m2_ck = {
+	.name		= "dpll4_m2_ck",
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3),
+	.clksel_mask	= OMAP3430_DIV_96M_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m2x2_ck = {
+	.name		= "dpll4_m2x2_ck",
+	.parent		= &dpll4_m2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_96M_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel omap_96m_alwon_fck_clksel[] = {
+	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk omap_96m_alwon_fck = {
+	.name		= "omap_96m_alwon_fck",
+	.parent		= &dpll4_m2x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel		= omap_96m_alwon_fck_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				 PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk omap_96m_fck = {
+	.name		= "omap_96m_fck",
+	.parent		= &omap_96m_alwon_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel cm_96m_fck_clksel[] = {
+	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk cm_96m_fck = {
+	.name		= "cm_96m_fck",
+	.parent		= &dpll4_m2x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel		= cm_96m_fck_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* This virtual clock is the source for dpll4_m3x2_ck */
+static struct clk dpll4_m3_ck = {
+	.name		= "dpll4_m3_ck",
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_TV_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m3x2_ck = {
+	.name		= "dpll4_m3x2_ck",
+	.parent		= &dpll4_m3_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_TV_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel virt_omap_54m_fck_clksel[] = {
+	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &dpll4_m3x2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk virt_omap_54m_fck = {
+	.name		= "virt_omap_54m_fck",
+	.parent		= &dpll4_m3x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel		= virt_omap_54m_fck_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate omap_54m_d4m3x2_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate omap_54m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel omap_54m_clksel[] = {
+	{ .parent = &virt_omap_54m_fck, .rates = omap_54m_d4m3x2_rates },
+	{ .parent = &sys_altclk,    .rates = omap_54m_alt_rates },
+	{ .parent = NULL }
+};
+
+static struct clk omap_54m_fck = {
+	.name		= "omap_54m_fck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_SOURCE_54M,
+	.clksel		= omap_54m_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate omap_48m_96md2_rates[] = {
+	{ .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate omap_48m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel omap_48m_clksel[] = {
+	{ .parent = &cm_96m_fck, .rates = omap_48m_96md2_rates },
+	{ .parent = &sys_altclk, .rates = omap_48m_alt_rates },
+	{ .parent = NULL }
+};
+
+static struct clk omap_48m_fck = {
+	.name		= "omap_48m_fck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_SOURCE_48M,
+	.clksel		= omap_48m_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk omap_12m_fck = {
+	.name		= "omap_12m_fck",
+	.parent		= &omap_48m_fck,
+	.fixed_div	= 4,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_fixed_divisor_recalc,
+};
+
+/* This virstual clock is the source for dpll4_m4x2_ck */
+static struct clk dpll4_m4_ck = {
+	.name		= "dpll4_m4_ck",
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_DSS1_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m4x2_ck = {
+	.name		= "dpll4_m4x2_ck",
+	.parent		= &dpll4_m4_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/* This virtual clock is the source for dpll4_m5x2_ck */
+static struct clk dpll4_m5_ck = {
+	.name		= "dpll4_m5_ck",
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_CAM_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m5x2_ck = {
+	.name		= "dpll4_m5x2_ck",
+	.parent		= &dpll4_m5_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/* This virtual clock is the source for dpll4_m6x2_ck */
+static struct clk dpll4_m6_ck = {
+	.name		= "dpll4_m6_ck",
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_DIV_DPLL4_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m6x2_ck = {
+	.name		= "dpll4_m6x2_ck",
+	.parent		= &dpll4_m6_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static struct clk emu_per_alwon_ck = {
+	.name		= "emu_per_alwon_ck",
+	.parent		= &dpll4_m6x2_ck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLL5 */
+/* Supplies 120MHz clock, USIM source clock */
+/* Type: DPLL */
+/* 3430ES2 only */
+static const struct dpll_data dpll5_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
+	.mult_mask	= OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
+	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
+	.enable_mask	= OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
+	.auto_recal_bit	= OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT,
+};
+
+static struct clk dpll5_ck = {
+	.name		= "dpll5_ck",
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll5_dd,
+	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &omap3_dpll_recalc,
+};
+
+static const struct clksel div16_dpll5_clksel[] = {
+	{ .parent = &dpll5_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dpll5_m2_ck = {
+	.name		= "dpll5_m2_ck",
+	.parent		= &dpll5_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
+	.clksel_mask	= OMAP3430ES2_DIV_120M_MASK,
+	.clksel		= div16_dpll5_clksel,
+	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel omap_120m_fck_clksel[] = {
+	{ .parent = &sys_ck,      .rates = dpll_bypass_rates },
+	{ .parent = &dpll5_m2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk omap_120m_fck = {
+	.name		= "omap_120m_fck",
+	.parent		= &dpll5_m2_ck,
+	.init           = &omap2_init_clksel_parent,
+	.clksel_reg     = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
+	.clksel_mask    = OMAP3430ES2_ST_PERIPH2_CLK_MASK,
+	.clksel         = omap_120m_fck_clksel,
+	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc         = &omap2_clksel_recalc,
+};
+
+/* CM EXTERNAL CLOCK OUTPUTS */
+
+static const struct clksel_rate clkout2_src_core_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate clkout2_src_sys_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate clkout2_src_96m_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate clkout2_src_54m_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel clkout2_src_clksel[] = {
+	{ .parent = &core_ck,		  .rates = clkout2_src_core_rates },
+	{ .parent = &sys_ck,		  .rates = clkout2_src_sys_rates },
+	{ .parent = &omap_96m_alwon_fck,  .rates = clkout2_src_96m_rates },
+	{ .parent = &omap_54m_fck,	  .rates = clkout2_src_54m_rates },
+	{ .parent = NULL }
+};
+
+static struct clk clkout2_src_ck = {
+	.name		= "clkout2_src_ck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP3430_CM_CLKOUT_CTRL,
+	.enable_bit	= OMAP3430_CLKOUT2_EN_SHIFT,
+	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP3430_CLKOUT2SOURCE_MASK,
+	.clksel		= clkout2_src_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate sys_clkout2_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 1, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 8, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 16, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel sys_clkout2_clksel[] = {
+	{ .parent = &clkout2_src_ck, .rates = sys_clkout2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk sys_clkout2 = {
+	.name		= "sys_clkout2",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP3430_CLKOUT2_DIV_MASK,
+	.clksel		= sys_clkout2_clksel,
+	.flags		= CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* CM OUTPUT CLOCKS */
+
+static struct clk corex2_fck = {
+	.name		= "corex2_fck",
+	.parent		= &dpll3_m2x2_ck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLL power domain clock controls */
+
+static const struct clksel div2_core_clksel[] = {
+	{ .parent = &core_ck, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * REVISIT: Are these in DPLL power domain or CM power domain? docs
+ * may be inconsistent here?
+ */
+static struct clk dpll1_fck = {
+	.name		= "dpll1_fck",
+	.parent		= &core_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.clksel_mask	= OMAP3430_MPU_CLK_SRC_MASK,
+	.clksel		= div2_core_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * MPU clksel:
+ * If DPLL1 is locked, mpu_ck derives from DPLL1; otherwise, mpu_ck
+ * derives from the high-frequency bypass clock originating from DPLL3,
+ * called 'dpll1_fck'
+ */
+static const struct clksel mpu_clksel[] = {
+	{ .parent = &dpll1_fck,     .rates = dpll_bypass_rates },
+	{ .parent = &dpll1_x2m2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mpu_ck = {
+	.name		= "mpu_ck",
+	.parent		= &dpll1_x2m2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
+	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
+	.clksel		= mpu_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */
+static const struct clksel_rate arm_fck_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 1, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel arm_fck_clksel[] = {
+	{ .parent = &mpu_ck, .rates = arm_fck_rates },
+	{ .parent = NULL }
+};
+
+static struct clk arm_fck = {
+	.name		= "arm_fck",
+	.parent		= &mpu_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
+	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
+	.clksel		= arm_fck_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * REVISIT: This clock is never specifically defined in the 3430 TRM,
+ * although it is referenced - so this is a guess
+ */
+static struct clk emu_mpu_alwon_ck = {
+	.name		= "emu_mpu_alwon_ck",
+	.parent		= &mpu_ck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dpll2_fck = {
+	.name		= "dpll2_fck",
+	.parent		= &core_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.clksel_mask	= OMAP3430_IVA2_CLK_SRC_MASK,
+	.clksel		= div2_core_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * IVA2 clksel:
+ * If DPLL2 is locked, iva2_ck derives from DPLL2; otherwise, iva2_ck
+ * derives from the high-frequency bypass clock originating from DPLL3,
+ * called 'dpll2_fck'
+ */
+
+static const struct clksel iva2_clksel[] = {
+	{ .parent = &dpll2_fck,   .rates = dpll_bypass_rates },
+	{ .parent = &dpll2_m2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk iva2_ck = {
+	.name		= "iva2_ck",
+	.parent		= &dpll2_m2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
+					  OMAP3430_CM_IDLEST_PLL),
+	.clksel_mask	= OMAP3430_ST_IVA2_CLK_MASK,
+	.clksel		= iva2_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* Common interface clocks */
+
+static struct clk l3_ick = {
+	.name		= "l3_ick",
+	.parent		= &core_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_L3_MASK,
+	.clksel		= div2_core_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel div2_l3_clksel[] = {
+	{ .parent = &l3_ick, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+static struct clk l4_ick = {
+	.name		= "l4_ick",
+	.parent		= &l3_ick,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_L4_MASK,
+	.clksel		= div2_l3_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+
+};
+
+static const struct clksel div2_l4_clksel[] = {
+	{ .parent = &l4_ick, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+static struct clk rm_ick = {
+	.name		= "rm_ick",
+	.parent		= &l4_ick,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_RM_MASK,
+	.clksel		= div2_l4_clksel,
+	.flags		= CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* GFX power domain */
+
+/* GFX clocks are in 3430ES1 only. 3430ES2 and later uses the SGX instead */
+
+static const struct clksel gfx_l3_clksel[] = {
+	{ .parent = &l3_ick, .rates = gfx_l3_rates },
+	{ .parent = NULL }
+};
+
+static struct clk gfx_l3_fck = {
+	.name		= "gfx_l3_fck",
+	.parent		= &l3_ick,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP_EN_GFX_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
+	.clksel		= gfx_l3_clksel,
+	.flags		= CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gfx_l3_ick = {
+	.name		= "gfx_l3_ick",
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP_EN_GFX_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES1,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gfx_cg1_ck = {
+	.name		= "gfx_cg1_ck",
+	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES1_EN_2D_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES1,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gfx_cg2_ck = {
+	.name		= "gfx_cg2_ck",
+	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES1_EN_3D_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES1,
+	.recalc		= &followparent_recalc,
+};
+
+/* SGX power domain - 3430ES2 only */
+
+static const struct clksel_rate sgx_core_rates[] = {
+	{ .div = 3, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 4, .val = 1, .flags = RATE_IN_343X },
+	{ .div = 6, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate sgx_96m_rates[] = {
+	{ .div = 1,  .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel sgx_clksel[] = {
+	{ .parent = &core_ck,	 .rates = sgx_core_rates },
+	{ .parent = &cm_96m_fck, .rates = sgx_96m_rates },
+	{ .parent = NULL },
+};
+
+static struct clk sgx_fck = {
+	.name		= "sgx_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_EN_SGX_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430ES2_CLKSEL_SGX_MASK,
+	.clksel		= sgx_clksel,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk sgx_ick = {
+	.name		= "sgx_ick",
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430ES2_EN_SGX_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE power domain */
+
+static struct clk d2d_26m_fck = {
+	.name		= "d2d_26m_fck",
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_D2D_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES1,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel omap343x_gpt_clksel[] = {
+	{ .parent = &omap_32k_fck, .rates = gpt_32k_rates },
+	{ .parent = &sys_ck,	   .rates = gpt_sys_rates },
+	{ .parent = NULL}
+};
+
+static struct clk gpt10_fck = {
+	.name		= "gpt10_fck",
+	.parent		= &sys_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT10_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt11_fck = {
+	.name		= "gpt11_fck",
+	.parent		= &sys_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT11_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk cpefuse_fck = {
+	.name		= "cpefuse_fck",
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_CPEFUSE_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk ts_fck = {
+	.name		= "ts_fck",
+	.parent		= &omap_32k_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_TS_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbtll_fck = {
+	.name		= "usbtll_fck",
+	.parent		= &omap_120m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE 96M FCLK-derived clocks */
+
+static struct clk core_96m_fck = {
+	.name		= "core_96m_fck",
+	.parent		= &omap_96m_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs3_fck = {
+	.name		= "mmchs_fck",
+	.id		= 3,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs2_fck = {
+	.name		= "mmchs_fck",
+	.id		= 2,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_fck = {
+	.name		= "mspro_fck",
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs1_fck = {
+	.name		= "mmchs_fck",
+	.id		= 1,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c3_fck = {
+	.name		= "i2c_fck",
+	.id		= 3,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_fck = {
+	.name		= "i2c_fck",
+	.id 		= 2,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c1_fck = {
+	.name		= "i2c_fck",
+	.id		= 1,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * MCBSP 1 & 5 get their 96MHz clock from core_96m_fck;
+ * MCBSP 2, 3, 4 get their 96MHz clock from per_96m_fck.
+ */
+static const struct clksel_rate common_mcbsp_96m_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_mcbsp_mcbsp_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel mcbsp_15_clksel[] = {
+	{ .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
+	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mcbsp5_fck = {
+	.name		= "mcbsp5_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP5_CLKS_MASK,
+	.clksel		= mcbsp_15_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp1_fck = {
+	.name		= "mcbsp1_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
+	.clksel_mask	= OMAP2_MCBSP1_CLKS_MASK,
+	.clksel		= mcbsp_15_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* CORE_48M_FCK-derived clocks */
+
+static struct clk core_48m_fck = {
+	.name		= "core_48m_fck",
+	.parent		= &omap_48m_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi4_fck = {
+	.name		= "mcspi_fck",
+	.id		= 4,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi3_fck = {
+	.name		= "mcspi_fck",
+	.id		= 3,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_fck = {
+	.name		= "mcspi_fck",
+	.id		= 2,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_fck = {
+	.name		= "mcspi_fck",
+	.id		= 1,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_fck = {
+	.name		= "uart2_fck",
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_fck = {
+	.name		= "uart1_fck",
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fshostusb_fck = {
+	.name		= "fshostusb_fck",
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES1,
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE_12M_FCK based clocks */
+
+static struct clk core_12m_fck = {
+	.name		= "core_12m_fck",
+	.parent		= &omap_12m_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_fck = {
+	.name		= "hdq_fck",
+	.parent		= &core_12m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLL3-derived clock */
+
+static const struct clksel_rate ssi_ssr_corex2_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_343X },
+	{ .div = 0 }
+};
+
+static const struct clksel ssi_ssr_clksel[] = {
+	{ .parent = &corex2_fck, .rates = ssi_ssr_corex2_rates },
+	{ .parent = NULL }
+};
+
+static struct clk ssi_ssr_fck = {
+	.name		= "ssi_ssr_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
+	.clksel		= ssi_ssr_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk ssi_sst_fck = {
+	.name		= "ssi_sst_fck",
+	.parent		= &ssi_ssr_fck,
+	.fixed_div	= 2,
+	.flags		= CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_fixed_divisor_recalc,
+};
+
+
+
+/* CORE_L3_ICK based clocks */
+
+static struct clk core_l3_ick = {
+	.name		= "core_l3_ick",
+	.parent		= &l3_ick,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hsotgusb_ick = {
+	.name		= "hsotgusb_ick",
+	.parent		= &core_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sdrc_ick = {
+	.name		= "sdrc_ick",
+	.parent		= &core_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SDRC_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | ENABLE_ON_INIT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpmc_fck = {
+	.name		= "gpmc_fck",
+	.parent		= &core_l3_ick,
+	.flags		= CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK |
+				ENABLE_ON_INIT,
+	.recalc		= &followparent_recalc,
+};
+
+/* SECURITY_L3_ICK based clocks */
+
+static struct clk security_l3_ick = {
+	.name		= "security_l3_ick",
+	.parent		= &l3_ick,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk pka_ick = {
+	.name		= "pka_ick",
+	.parent		= &security_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_PKA_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE_L4_ICK based clocks */
+
+static struct clk core_l4_ick = {
+	.name		= "core_l4_ick",
+	.parent		= &l4_ick,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbtll_ick = {
+	.name		= "usbtll_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs3_ick = {
+	.name		= "mmchs_ick",
+	.id		= 3,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+/* Intersystem Communication Registers - chassis mode only */
+static struct clk icr_ick = {
+	.name		= "icr_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_ICR_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk aes2_ick = {
+	.name		= "aes2_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_AES2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sha12_ick = {
+	.name		= "sha12_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SHA12_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk des2_ick = {
+	.name		= "des2_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_DES2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs2_ick = {
+	.name		= "mmchs_ick",
+	.id		= 2,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs1_ick = {
+	.name		= "mmchs_ick",
+	.id		= 1,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_ick = {
+	.name		= "mspro_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_ick = {
+	.name		= "hdq_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi4_ick = {
+	.name		= "mcspi_ick",
+	.id		= 4,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi3_ick = {
+	.name		= "mcspi_ick",
+	.id		= 3,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_ick = {
+	.name		= "mcspi_ick",
+	.id		= 2,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_ick = {
+	.name		= "mcspi_ick",
+	.id		= 1,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c3_ick = {
+	.name		= "i2c_ick",
+	.id		= 3,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_ick = {
+	.name		= "i2c_ick",
+	.id		= 2,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c1_ick = {
+	.name		= "i2c_ick",
+	.id		= 1,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_ick = {
+	.name		= "uart2_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_ick = {
+	.name		= "uart1_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt11_ick = {
+	.name		= "gpt11_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt10_ick = {
+	.name		= "gpt10_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp5_ick = {
+	.name		= "mcbsp5_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp1_ick = {
+	.name		= "mcbsp1_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fac_ick = {
+	.name		= "fac_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_FAC_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES1,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mailboxes_ick = {
+	.name		= "mailboxes_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MAILBOXES_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk omapctrl_ick = {
+	.name		= "omapctrl_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_OMAPCTRL_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | ENABLE_ON_INIT,
+	.recalc		= &followparent_recalc,
+};
+
+/* SSI_L4_ICK based clocks */
+
+static struct clk ssi_l4_ick = {
+	.name		= "ssi_l4_ick",
+	.parent		= &l4_ick,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk ssi_ick = {
+	.name		= "ssi_ick",
+	.parent		= &ssi_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* REVISIT: Technically the TRM claims that this is CORE_CLK based,
+ * but l4_ick makes more sense to me */
+
+static const struct clksel usb_l4_clksel[] = {
+	{ .parent = &l4_ick, .rates = div2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk usb_l4_ick = {
+	.name		= "usb_l4_ick",
+	.parent		= &l4_ick,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK,
+	.clksel		= usb_l4_clksel,
+	.flags		= CLOCK_IN_OMAP3430ES1,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* XXX MDM_INTC_ICK, SAD2D_ICK ?? */
+
+/* SECURITY_L4_ICK2 based clocks */
+
+static struct clk security_l4_ick2 = {
+	.name		= "security_l4_ick2",
+	.parent		= &l4_ick,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk aes1_ick = {
+	.name		= "aes1_ick",
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_AES1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk rng_ick = {
+	.name		= "rng_ick",
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_RNG_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sha11_ick = {
+	.name		= "sha11_ick",
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_SHA11_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk des1_ick = {
+	.name		= "des1_ick",
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_DES1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* DSS */
+static const struct clksel dss1_alwon_fck_clksel[] = {
+	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &dpll4_m4x2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dss1_alwon_fck = {
+	.name		= "dss1_alwon_fck",
+	.parent		= &dpll4_m4x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel		= dss1_alwon_fck_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk dss_tv_fck = {
+	.name		= "dss_tv_fck",
+	.parent		= &omap_54m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_TV_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_96m_fck = {
+	.name		= "dss_96m_fck",
+	.parent		= &omap_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_TV_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss2_alwon_fck = {
+	.name		= "dss2_alwon_fck",
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_DSS2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_ick = {
+	/* Handles both L3 and L4 clocks */
+	.name		= "dss_ick",
+	.parent		= &l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* CAM */
+
+static const struct clksel cam_mclk_clksel[] = {
+	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &dpll4_m5x2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk cam_mclk = {
+	.name		= "cam_mclk",
+	.parent		= &dpll4_m5x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel		= cam_mclk_clksel,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk cam_l3_ick = {
+	.name		= "cam_l3_ick",
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk cam_l4_ick = {
+	.name		= "cam_l4_ick",
+	.parent		= &l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* USBHOST - 3430ES2 only */
+
+static struct clk usbhost_120m_fck = {
+	.name		= "usbhost_120m_fck",
+	.parent		= &omap_120m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USBHOST2_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbhost_48m_fck = {
+	.name		= "usbhost_48m_fck",
+	.parent		= &omap_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USBHOST1_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbhost_l3_ick = {
+	.name		= "usbhost_l3_ick",
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USBHOST_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbhost_l4_ick = {
+	.name		= "usbhost_l4_ick",
+	.parent		= &l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USBHOST_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbhost_sar_fck = {
+	.name		= "usbhost_sar_fck",
+	.parent		= &osc_sys_ck,
+	.enable_reg	= OMAP_PRM_REGADDR(OMAP3430ES2_USBHOST_MOD, PM_PWSTCTRL),
+	.enable_bit	= OMAP3430ES2_SAVEANDRESTORE_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+/* WKUP */
+
+static const struct clksel_rate usim_96m_rates[] = {
+	{ .div = 2,  .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 4,  .val = 4, .flags = RATE_IN_343X },
+	{ .div = 8,  .val = 5, .flags = RATE_IN_343X },
+	{ .div = 10, .val = 6, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate usim_120m_rates[] = {
+	{ .div = 4,  .val = 7,	.flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 8,  .val = 8,	.flags = RATE_IN_343X },
+	{ .div = 16, .val = 9,	.flags = RATE_IN_343X },
+	{ .div = 20, .val = 10, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel usim_clksel[] = {
+	{ .parent = &omap_96m_fck,	.rates = usim_96m_rates },
+	{ .parent = &omap_120m_fck,	.rates = usim_120m_rates },
+	{ .parent = &sys_ck,		.rates = div2_rates },
+	{ .parent = NULL },
+};
+
+/* 3430ES2 only */
+static struct clk usim_fck = {
+	.name		= "usim_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430ES2_CLKSEL_USIMOCP_MASK,
+	.clksel		= usim_clksel,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt1_fck = {
+	.name		= "gpt1_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT1_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk wkup_32k_fck = {
+	.name		= "wkup_32k_fck",
+	.parent		= &omap_32k_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio1_fck = {
+	.name		= "gpio1_fck",
+	.parent		= &wkup_32k_fck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt2_fck = {
+	.name		= "wdt2_fck",
+	.parent		= &wkup_32k_fck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wkup_l4_ick = {
+	.name		= "wkup_l4_ick",
+	.parent		= &sys_ck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+};
+
+/* 3430ES2 only */
+/* Never specifically named in the TRM, so we have to infer a likely name */
+static struct clk usim_ick = {
+	.name		= "usim_ick",
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt2_ick = {
+	.name		= "wdt2_ick",
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt1_ick = {
+	.name		= "wdt1_ick",
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_WDT1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio1_ick = {
+	.name		= "gpio1_ick",
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk omap_32ksync_ick = {
+	.name		= "omap_32ksync_ick",
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_32KSYNC_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt12_ick = {
+	.name		= "gpt12_ick",
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT12_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt1_ick = {
+	.name		= "gpt1_ick",
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+
+
+/* PER clock domain */
+
+static struct clk per_96m_fck = {
+	.name		= "per_96m_fck",
+	.parent		= &omap_96m_alwon_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk per_48m_fck = {
+	.name		= "per_48m_fck",
+	.parent		= &omap_48m_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_fck = {
+	.name		= "uart3_fck",
+	.parent		= &per_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt2_fck = {
+	.name		= "gpt2_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT2_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt3_fck = {
+	.name		= "gpt3_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT3_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt4_fck = {
+	.name		= "gpt4_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT4_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt5_fck = {
+	.name		= "gpt5_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT5_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt6_fck = {
+	.name		= "gpt6_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT6_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt7_fck = {
+	.name		= "gpt7_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT7_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt8_fck = {
+	.name		= "gpt8_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT8_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt9_fck = {
+	.name		= "gpt9_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT9_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk per_32k_alwon_fck = {
+	.name		= "per_32k_alwon_fck",
+	.parent		= &omap_32k_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio6_fck = {
+	.name		= "gpio6_fck",
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio5_fck = {
+	.name		= "gpio5_fck",
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio4_fck = {
+	.name		= "gpio4_fck",
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio3_fck = {
+	.name		= "gpio3_fck",
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio2_fck = {
+	.name		= "gpio2_fck",
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_fck = {
+	.name		= "wdt3_fck",
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk per_l4_ick = {
+	.name		= "per_l4_ick",
+	.parent		= &l4_ick,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio6_ick = {
+	.name		= "gpio6_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio5_ick = {
+	.name		= "gpio5_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio4_ick = {
+	.name		= "gpio4_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio3_ick = {
+	.name		= "gpio3_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio2_ick = {
+	.name		= "gpio2_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_ick = {
+	.name		= "wdt3_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_ick = {
+	.name		= "uart3_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt9_ick = {
+	.name		= "gpt9_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt8_ick = {
+	.name		= "gpt8_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt7_ick = {
+	.name		= "gpt7_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt6_ick = {
+	.name		= "gpt6_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt5_ick = {
+	.name		= "gpt5_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt4_ick = {
+	.name		= "gpt4_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt3_ick = {
+	.name		= "gpt3_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt2_ick = {
+	.name		= "gpt2_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp2_ick = {
+	.name		= "mcbsp2_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp3_ick = {
+	.name		= "mcbsp3_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp4_ick = {
+	.name		= "mcbsp4_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel mcbsp_234_clksel[] = {
+	{ .parent = &per_96m_fck, .rates = common_mcbsp_96m_rates },
+	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mcbsp2_fck = {
+	.name		= "mcbsp2_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
+	.clksel_mask	= OMAP2_MCBSP2_CLKS_MASK,
+	.clksel		= mcbsp_234_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp3_fck = {
+	.name		= "mcbsp3_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP3_CLKS_MASK,
+	.clksel		= mcbsp_234_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp4_fck = {
+	.name		= "mcbsp4_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP4_CLKS_MASK,
+	.clksel		= mcbsp_234_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* EMU clocks */
+
+/* More information: ARM Cortex-A8 Technical Reference Manual, sect 10.1 */
+
+static const struct clksel_rate emu_src_sys_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate emu_src_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate emu_src_per_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate emu_src_mpu_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel emu_src_clksel[] = {
+	{ .parent = &sys_ck,		.rates = emu_src_sys_rates },
+	{ .parent = &emu_core_alwon_ck, .rates = emu_src_core_rates },
+	{ .parent = &emu_per_alwon_ck,	.rates = emu_src_per_rates },
+	{ .parent = &emu_mpu_alwon_ck,	.rates = emu_src_mpu_rates },
+	{ .parent = NULL },
+};
+
+/*
+ * Like the clkout_src clocks, emu_src_clk is a virtual clock, existing only
+ * to switch the source of some of the EMU clocks.
+ * XXX Are there CLKEN bits for these EMU clks?
+ */
+static struct clk emu_src_ck = {
+	.name		= "emu_src_ck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_MUX_CTRL_MASK,
+	.clksel		= emu_src_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate pclk_emu_rates[] = {
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel pclk_emu_clksel[] = {
+	{ .parent = &emu_src_ck, .rates = pclk_emu_rates },
+	{ .parent = NULL },
+};
+
+static struct clk pclk_fck = {
+	.name		= "pclk_fck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_PCLK_MASK,
+	.clksel		= pclk_emu_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate pclkx2_emu_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel pclkx2_emu_clksel[] = {
+	{ .parent = &emu_src_ck, .rates = pclkx2_emu_rates },
+	{ .parent = NULL },
+};
+
+static struct clk pclkx2_fck = {
+	.name		= "pclkx2_fck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_PCLKX2_MASK,
+	.clksel		= pclkx2_emu_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel atclk_emu_clksel[] = {
+	{ .parent = &emu_src_ck, .rates = div2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk atclk_fck = {
+	.name		= "atclk_fck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_ATCLK_MASK,
+	.clksel		= atclk_emu_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk traceclk_src_fck = {
+	.name		= "traceclk_src_fck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_TRACE_MUX_CTRL_MASK,
+	.clksel		= emu_src_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate traceclk_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel traceclk_clksel[] = {
+	{ .parent = &traceclk_src_fck, .rates = traceclk_rates },
+	{ .parent = NULL },
+};
+
+static struct clk traceclk_fck = {
+	.name		= "traceclk_fck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_TRACECLK_MASK,
+	.clksel		= traceclk_clksel,
+	.flags		= CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* SR clocks */
+
+/* SmartReflex fclk (VDD1) */
+static struct clk sr1_fck = {
+	.name		= "sr1_fck",
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_SR1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.recalc		= &followparent_recalc,
+};
+
+/* SmartReflex fclk (VDD2) */
+static struct clk sr2_fck = {
+	.name		= "sr2_fck",
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_SR2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sr_l4_ick = {
+	.name		= "sr_l4_ick",
+	.parent		= &l4_ick,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* SECURE_32K_FCK clocks */
+
+static struct clk gpt12_fck = {
+	.name		= "gpt12_fck",
+	.parent		= &secure_32k_fck,
+	.flags		= CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt1_fck = {
+	.name		= "wdt1_fck",
+	.parent		= &secure_32k_fck,
+	.flags		= CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk *onchip_34xx_clks[] __initdata = {
+	&omap_32k_fck,
+	&virt_12m_ck,
+	&virt_13m_ck,
+	&virt_16_8m_ck,
+	&virt_19_2m_ck,
+	&virt_26m_ck,
+	&virt_38_4m_ck,
+	&osc_sys_ck,
+	&sys_ck,
+	&sys_altclk,
+	&mcbsp_clks,
+	&sys_clkout1,
+	&dpll1_ck,
+	&dpll1_x2_ck,
+	&dpll1_x2m2_ck,
+	&dpll2_ck,
+	&dpll2_m2_ck,
+	&dpll3_ck,
+	&core_ck,
+	&dpll3_x2_ck,
+	&dpll3_m2_ck,
+	&dpll3_m2x2_ck,
+	&dpll3_m3_ck,
+	&dpll3_m3x2_ck,
+	&emu_core_alwon_ck,
+	&dpll4_ck,
+	&dpll4_x2_ck,
+	&omap_96m_alwon_fck,
+	&omap_96m_fck,
+	&cm_96m_fck,
+	&virt_omap_54m_fck,
+	&omap_54m_fck,
+	&omap_48m_fck,
+	&omap_12m_fck,
+	&dpll4_m2_ck,
+	&dpll4_m2x2_ck,
+	&dpll4_m3_ck,
+	&dpll4_m3x2_ck,
+	&dpll4_m4_ck,
+	&dpll4_m4x2_ck,
+	&dpll4_m5_ck,
+	&dpll4_m5x2_ck,
+	&dpll4_m6_ck,
+	&dpll4_m6x2_ck,
+	&emu_per_alwon_ck,
+	&dpll5_ck,
+	&dpll5_m2_ck,
+	&omap_120m_fck,
+	&clkout2_src_ck,
+	&sys_clkout2,
+	&corex2_fck,
+	&dpll1_fck,
+	&mpu_ck,
+	&arm_fck,
+	&emu_mpu_alwon_ck,
+	&dpll2_fck,
+	&iva2_ck,
+	&l3_ick,
+	&l4_ick,
+	&rm_ick,
+	&gfx_l3_fck,
+	&gfx_l3_ick,
+	&gfx_cg1_ck,
+	&gfx_cg2_ck,
+	&sgx_fck,
+	&sgx_ick,
+	&d2d_26m_fck,
+	&gpt10_fck,
+	&gpt11_fck,
+	&cpefuse_fck,
+	&ts_fck,
+	&usbtll_fck,
+	&core_96m_fck,
+	&mmchs3_fck,
+	&mmchs2_fck,
+	&mspro_fck,
+	&mmchs1_fck,
+	&i2c3_fck,
+	&i2c2_fck,
+	&i2c1_fck,
+	&mcbsp5_fck,
+	&mcbsp1_fck,
+	&core_48m_fck,
+	&mcspi4_fck,
+	&mcspi3_fck,
+	&mcspi2_fck,
+	&mcspi1_fck,
+	&uart2_fck,
+	&uart1_fck,
+	&fshostusb_fck,
+	&core_12m_fck,
+	&hdq_fck,
+	&ssi_ssr_fck,
+	&ssi_sst_fck,
+	&core_l3_ick,
+	&hsotgusb_ick,
+	&sdrc_ick,
+	&gpmc_fck,
+	&security_l3_ick,
+	&pka_ick,
+	&core_l4_ick,
+	&usbtll_ick,
+	&mmchs3_ick,
+	&icr_ick,
+	&aes2_ick,
+	&sha12_ick,
+	&des2_ick,
+	&mmchs2_ick,
+	&mmchs1_ick,
+	&mspro_ick,
+	&hdq_ick,
+	&mcspi4_ick,
+	&mcspi3_ick,
+	&mcspi2_ick,
+	&mcspi1_ick,
+	&i2c3_ick,
+	&i2c2_ick,
+	&i2c1_ick,
+	&uart2_ick,
+	&uart1_ick,
+	&gpt11_ick,
+	&gpt10_ick,
+	&mcbsp5_ick,
+	&mcbsp1_ick,
+	&fac_ick,
+	&mailboxes_ick,
+	&omapctrl_ick,
+	&ssi_l4_ick,
+	&ssi_ick,
+	&usb_l4_ick,
+	&security_l4_ick2,
+	&aes1_ick,
+	&rng_ick,
+	&sha11_ick,
+	&des1_ick,
+	&dss1_alwon_fck,
+	&dss_tv_fck,
+	&dss_96m_fck,
+	&dss2_alwon_fck,
+	&dss_ick,
+	&cam_mclk,
+	&cam_l3_ick,
+	&cam_l4_ick,
+	&usbhost_120m_fck,
+	&usbhost_48m_fck,
+	&usbhost_l3_ick,
+	&usbhost_l4_ick,
+	&usbhost_sar_fck,
+	&usim_fck,
+	&gpt1_fck,
+	&wkup_32k_fck,
+	&gpio1_fck,
+	&wdt2_fck,
+	&wkup_l4_ick,
+	&usim_ick,
+	&wdt2_ick,
+	&wdt1_ick,
+	&gpio1_ick,
+	&omap_32ksync_ick,
+	&gpt12_ick,
+	&gpt1_ick,
+	&per_96m_fck,
+	&per_48m_fck,
+	&uart3_fck,
+	&gpt2_fck,
+	&gpt3_fck,
+	&gpt4_fck,
+	&gpt5_fck,
+	&gpt6_fck,
+	&gpt7_fck,
+	&gpt8_fck,
+	&gpt9_fck,
+	&per_32k_alwon_fck,
+	&gpio6_fck,
+	&gpio5_fck,
+	&gpio4_fck,
+	&gpio3_fck,
+	&gpio2_fck,
+	&wdt3_fck,
+	&per_l4_ick,
+	&gpio6_ick,
+	&gpio5_ick,
+	&gpio4_ick,
+	&gpio3_ick,
+	&gpio2_ick,
+	&wdt3_ick,
+	&uart3_ick,
+	&gpt9_ick,
+	&gpt8_ick,
+	&gpt7_ick,
+	&gpt6_ick,
+	&gpt5_ick,
+	&gpt4_ick,
+	&gpt3_ick,
+	&gpt2_ick,
+	&mcbsp2_ick,
+	&mcbsp3_ick,
+	&mcbsp4_ick,
+	&mcbsp2_fck,
+	&mcbsp3_fck,
+	&mcbsp4_fck,
+	&emu_src_ck,
+	&pclk_fck,
+	&pclkx2_fck,
+	&atclk_fck,
+	&traceclk_src_fck,
+	&traceclk_fck,
+	&sr1_fck,
+	&sr2_fck,
+	&sr_l4_ick,
+	&secure_32k_fck,
+	&gpt12_fck,
+	&wdt1_fck,
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h
new file mode 100644
index 0000000..20ac381
--- /dev/null
+++ b/arch/arm/mach-omap2/cm-regbits-24xx.h
@@ -0,0 +1,401 @@
+#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_24XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_24XX_H
+
+/*
+ * OMAP24XX Clock Management register bits
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "cm.h"
+
+/* Bits shared between registers */
+
+/* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
+#define OMAP24XX_EN_CAM_SHIFT				31
+#define OMAP24XX_EN_CAM					(1 << 31)
+#define OMAP24XX_EN_WDT4_SHIFT				29
+#define OMAP24XX_EN_WDT4				(1 << 29)
+#define OMAP2420_EN_WDT3_SHIFT				28
+#define OMAP2420_EN_WDT3				(1 << 28)
+#define OMAP24XX_EN_MSPRO_SHIFT				27
+#define OMAP24XX_EN_MSPRO				(1 << 27)
+#define OMAP24XX_EN_FAC_SHIFT				25
+#define OMAP24XX_EN_FAC					(1 << 25)
+#define OMAP2420_EN_EAC_SHIFT				24
+#define OMAP2420_EN_EAC					(1 << 24)
+#define OMAP24XX_EN_HDQ_SHIFT				23
+#define OMAP24XX_EN_HDQ					(1 << 23)
+#define OMAP2420_EN_I2C2_SHIFT				20
+#define OMAP2420_EN_I2C2				(1 << 20)
+#define OMAP2420_EN_I2C1_SHIFT				19
+#define OMAP2420_EN_I2C1				(1 << 19)
+
+/* CM_FCLKEN2_CORE and CM_ICLKEN2_CORE shared bits */
+#define OMAP2430_EN_MCBSP5_SHIFT			5
+#define OMAP2430_EN_MCBSP5				(1 << 5)
+#define OMAP2430_EN_MCBSP4_SHIFT			4
+#define OMAP2430_EN_MCBSP4				(1 << 4)
+#define OMAP2430_EN_MCBSP3_SHIFT			3
+#define OMAP2430_EN_MCBSP3				(1 << 3)
+#define OMAP24XX_EN_SSI_SHIFT				1
+#define OMAP24XX_EN_SSI					(1 << 1)
+
+/* CM_FCLKEN_WKUP and CM_ICLKEN_WKUP shared bits */
+#define OMAP24XX_EN_MPU_WDT_SHIFT			3
+#define OMAP24XX_EN_MPU_WDT				(1 << 3)
+
+/* Bits specific to each register */
+
+/* CM_IDLEST_MPU */
+/* 2430 only */
+#define OMAP2430_ST_MPU					(1 << 0)
+
+/* CM_CLKSEL_MPU */
+#define OMAP24XX_CLKSEL_MPU_SHIFT			0
+#define OMAP24XX_CLKSEL_MPU_MASK			(0x1f << 0)
+
+/* CM_CLKSTCTRL_MPU */
+#define OMAP24XX_AUTOSTATE_MPU				(1 << 0)
+
+/* CM_FCLKEN1_CORE specific bits*/
+#define OMAP24XX_EN_TV_SHIFT				2
+#define OMAP24XX_EN_TV					(1 << 2)
+#define OMAP24XX_EN_DSS2_SHIFT				1
+#define OMAP24XX_EN_DSS2				(1 << 1)
+#define OMAP24XX_EN_DSS1_SHIFT				0
+#define OMAP24XX_EN_DSS1				(1 << 0)
+
+/* CM_FCLKEN2_CORE specific bits */
+#define OMAP2430_EN_I2CHS2_SHIFT			20
+#define OMAP2430_EN_I2CHS2				(1 << 20)
+#define OMAP2430_EN_I2CHS1_SHIFT			19
+#define OMAP2430_EN_I2CHS1				(1 << 19)
+#define OMAP2430_EN_MMCHSDB2_SHIFT			17
+#define OMAP2430_EN_MMCHSDB2				(1 << 17)
+#define OMAP2430_EN_MMCHSDB1_SHIFT			16
+#define OMAP2430_EN_MMCHSDB1				(1 << 16)
+
+/* CM_ICLKEN1_CORE specific bits */
+#define OMAP24XX_EN_MAILBOXES_SHIFT			30
+#define OMAP24XX_EN_MAILBOXES				(1 << 30)
+#define OMAP24XX_EN_DSS_SHIFT				0
+#define OMAP24XX_EN_DSS					(1 << 0)
+
+/* CM_ICLKEN2_CORE specific bits */
+
+/* CM_ICLKEN3_CORE */
+/* 2430 only */
+#define OMAP2430_EN_SDRC_SHIFT				2
+#define OMAP2430_EN_SDRC				(1 << 2)
+
+/* CM_ICLKEN4_CORE */
+#define OMAP24XX_EN_PKA_SHIFT				4
+#define OMAP24XX_EN_PKA					(1 << 4)
+#define OMAP24XX_EN_AES_SHIFT				3
+#define OMAP24XX_EN_AES					(1 << 3)
+#define OMAP24XX_EN_RNG_SHIFT				2
+#define OMAP24XX_EN_RNG					(1 << 2)
+#define OMAP24XX_EN_SHA_SHIFT				1
+#define OMAP24XX_EN_SHA					(1 << 1)
+#define OMAP24XX_EN_DES_SHIFT				0
+#define OMAP24XX_EN_DES					(1 << 0)
+
+/* CM_IDLEST1_CORE specific bits */
+#define OMAP24XX_ST_MAILBOXES				(1 << 30)
+#define OMAP24XX_ST_WDT4				(1 << 29)
+#define OMAP2420_ST_WDT3				(1 << 28)
+#define OMAP24XX_ST_MSPRO				(1 << 27)
+#define OMAP24XX_ST_FAC					(1 << 25)
+#define OMAP2420_ST_EAC					(1 << 24)
+#define OMAP24XX_ST_HDQ					(1 << 23)
+#define OMAP24XX_ST_I2C2				(1 << 20)
+#define OMAP24XX_ST_I2C1				(1 << 19)
+#define OMAP24XX_ST_MCBSP2				(1 << 16)
+#define OMAP24XX_ST_MCBSP1				(1 << 15)
+#define OMAP24XX_ST_DSS					(1 << 0)
+
+/* CM_IDLEST2_CORE */
+#define OMAP2430_ST_MCBSP5				(1 << 5)
+#define OMAP2430_ST_MCBSP4				(1 << 4)
+#define OMAP2430_ST_MCBSP3				(1 << 3)
+#define OMAP24XX_ST_SSI					(1 << 1)
+
+/* CM_IDLEST3_CORE */
+/* 2430 only */
+#define OMAP2430_ST_SDRC				(1 << 2)
+
+/* CM_IDLEST4_CORE */
+#define OMAP24XX_ST_PKA					(1 << 4)
+#define OMAP24XX_ST_AES					(1 << 3)
+#define OMAP24XX_ST_RNG					(1 << 2)
+#define OMAP24XX_ST_SHA					(1 << 1)
+#define OMAP24XX_ST_DES					(1 << 0)
+
+/* CM_AUTOIDLE1_CORE */
+#define OMAP24XX_AUTO_CAM				(1 << 31)
+#define OMAP24XX_AUTO_MAILBOXES				(1 << 30)
+#define OMAP24XX_AUTO_WDT4				(1 << 29)
+#define OMAP2420_AUTO_WDT3				(1 << 28)
+#define OMAP24XX_AUTO_MSPRO				(1 << 27)
+#define OMAP2420_AUTO_MMC				(1 << 26)
+#define OMAP24XX_AUTO_FAC				(1 << 25)
+#define OMAP2420_AUTO_EAC				(1 << 24)
+#define OMAP24XX_AUTO_HDQ				(1 << 23)
+#define OMAP24XX_AUTO_UART2				(1 << 22)
+#define OMAP24XX_AUTO_UART1				(1 << 21)
+#define OMAP24XX_AUTO_I2C2				(1 << 20)
+#define OMAP24XX_AUTO_I2C1				(1 << 19)
+#define OMAP24XX_AUTO_MCSPI2				(1 << 18)
+#define OMAP24XX_AUTO_MCSPI1				(1 << 17)
+#define OMAP24XX_AUTO_MCBSP2				(1 << 16)
+#define OMAP24XX_AUTO_MCBSP1				(1 << 15)
+#define OMAP24XX_AUTO_GPT12				(1 << 14)
+#define OMAP24XX_AUTO_GPT11				(1 << 13)
+#define OMAP24XX_AUTO_GPT10				(1 << 12)
+#define OMAP24XX_AUTO_GPT9				(1 << 11)
+#define OMAP24XX_AUTO_GPT8				(1 << 10)
+#define OMAP24XX_AUTO_GPT7				(1 << 9)
+#define OMAP24XX_AUTO_GPT6				(1 << 8)
+#define OMAP24XX_AUTO_GPT5				(1 << 7)
+#define OMAP24XX_AUTO_GPT4				(1 << 6)
+#define OMAP24XX_AUTO_GPT3				(1 << 5)
+#define OMAP24XX_AUTO_GPT2				(1 << 4)
+#define OMAP2420_AUTO_VLYNQ				(1 << 3)
+#define OMAP24XX_AUTO_DSS				(1 << 0)
+
+/* CM_AUTOIDLE2_CORE */
+#define OMAP2430_AUTO_MDM_INTC				(1 << 11)
+#define OMAP2430_AUTO_GPIO5				(1 << 10)
+#define OMAP2430_AUTO_MCSPI3				(1 << 9)
+#define OMAP2430_AUTO_MMCHS2				(1 << 8)
+#define OMAP2430_AUTO_MMCHS1				(1 << 7)
+#define OMAP2430_AUTO_USBHS				(1 << 6)
+#define OMAP2430_AUTO_MCBSP5				(1 << 5)
+#define OMAP2430_AUTO_MCBSP4				(1 << 4)
+#define OMAP2430_AUTO_MCBSP3				(1 << 3)
+#define OMAP24XX_AUTO_UART3				(1 << 2)
+#define OMAP24XX_AUTO_SSI				(1 << 1)
+#define OMAP24XX_AUTO_USB				(1 << 0)
+
+/* CM_AUTOIDLE3_CORE */
+#define OMAP24XX_AUTO_SDRC				(1 << 2)
+#define OMAP24XX_AUTO_GPMC				(1 << 1)
+#define OMAP24XX_AUTO_SDMA				(1 << 0)
+
+/* CM_AUTOIDLE4_CORE */
+#define OMAP24XX_AUTO_PKA				(1 << 4)
+#define OMAP24XX_AUTO_AES				(1 << 3)
+#define OMAP24XX_AUTO_RNG				(1 << 2)
+#define OMAP24XX_AUTO_SHA				(1 << 1)
+#define OMAP24XX_AUTO_DES				(1 << 0)
+
+/* CM_CLKSEL1_CORE */
+#define OMAP24XX_CLKSEL_USB_SHIFT			25
+#define OMAP24XX_CLKSEL_USB_MASK			(0x7 << 25)
+#define OMAP24XX_CLKSEL_SSI_SHIFT			20
+#define OMAP24XX_CLKSEL_SSI_MASK			(0x1f << 20)
+#define OMAP2420_CLKSEL_VLYNQ_SHIFT			15
+#define OMAP2420_CLKSEL_VLYNQ_MASK			(0x1f << 15)
+#define OMAP24XX_CLKSEL_DSS2_SHIFT			13
+#define OMAP24XX_CLKSEL_DSS2_MASK			(0x1 << 13)
+#define OMAP24XX_CLKSEL_DSS1_SHIFT			8
+#define OMAP24XX_CLKSEL_DSS1_MASK			(0x1f << 8)
+#define OMAP24XX_CLKSEL_L4_SHIFT			5
+#define OMAP24XX_CLKSEL_L4_MASK				(0x3 << 5)
+#define OMAP24XX_CLKSEL_L3_SHIFT			0
+#define OMAP24XX_CLKSEL_L3_MASK				(0x1f << 0)
+
+/* CM_CLKSEL2_CORE */
+#define OMAP24XX_CLKSEL_GPT12_SHIFT			22
+#define OMAP24XX_CLKSEL_GPT12_MASK			(0x3 << 22)
+#define OMAP24XX_CLKSEL_GPT11_SHIFT			20
+#define OMAP24XX_CLKSEL_GPT11_MASK			(0x3 << 20)
+#define OMAP24XX_CLKSEL_GPT10_SHIFT			18
+#define OMAP24XX_CLKSEL_GPT10_MASK			(0x3 << 18)
+#define OMAP24XX_CLKSEL_GPT9_SHIFT			16
+#define OMAP24XX_CLKSEL_GPT9_MASK			(0x3 << 16)
+#define OMAP24XX_CLKSEL_GPT8_SHIFT			14
+#define OMAP24XX_CLKSEL_GPT8_MASK			(0x3 << 14)
+#define OMAP24XX_CLKSEL_GPT7_SHIFT			12
+#define OMAP24XX_CLKSEL_GPT7_MASK			(0x3 << 12)
+#define OMAP24XX_CLKSEL_GPT6_SHIFT			10
+#define OMAP24XX_CLKSEL_GPT6_MASK			(0x3 << 10)
+#define OMAP24XX_CLKSEL_GPT5_SHIFT			8
+#define OMAP24XX_CLKSEL_GPT5_MASK			(0x3 << 8)
+#define OMAP24XX_CLKSEL_GPT4_SHIFT			6
+#define OMAP24XX_CLKSEL_GPT4_MASK			(0x3 << 6)
+#define OMAP24XX_CLKSEL_GPT3_SHIFT			4
+#define OMAP24XX_CLKSEL_GPT3_MASK			(0x3 << 4)
+#define OMAP24XX_CLKSEL_GPT2_SHIFT			2
+#define OMAP24XX_CLKSEL_GPT2_MASK			(0x3 << 2)
+
+/* CM_CLKSTCTRL_CORE */
+#define OMAP24XX_AUTOSTATE_DSS				(1 << 2)
+#define OMAP24XX_AUTOSTATE_L4				(1 << 1)
+#define OMAP24XX_AUTOSTATE_L3				(1 << 0)
+
+/* CM_FCLKEN_GFX */
+#define OMAP24XX_EN_3D_SHIFT				2
+#define OMAP24XX_EN_3D					(1 << 2)
+#define OMAP24XX_EN_2D_SHIFT				1
+#define OMAP24XX_EN_2D					(1 << 1)
+
+/* CM_ICLKEN_GFX specific bits */
+
+/* CM_IDLEST_GFX specific bits */
+
+/* CM_CLKSEL_GFX specific bits */
+
+/* CM_CLKSTCTRL_GFX */
+#define OMAP24XX_AUTOSTATE_GFX				(1 << 0)
+
+/* CM_FCLKEN_WKUP specific bits */
+
+/* CM_ICLKEN_WKUP specific bits */
+#define OMAP2430_EN_ICR_SHIFT				6
+#define OMAP2430_EN_ICR					(1 << 6)
+#define OMAP24XX_EN_OMAPCTRL_SHIFT			5
+#define OMAP24XX_EN_OMAPCTRL				(1 << 5)
+#define OMAP24XX_EN_WDT1_SHIFT				4
+#define OMAP24XX_EN_WDT1				(1 << 4)
+#define OMAP24XX_EN_32KSYNC_SHIFT			1
+#define OMAP24XX_EN_32KSYNC				(1 << 1)
+
+/* CM_IDLEST_WKUP specific bits */
+#define OMAP2430_ST_ICR					(1 << 6)
+#define OMAP24XX_ST_OMAPCTRL				(1 << 5)
+#define OMAP24XX_ST_WDT1				(1 << 4)
+#define OMAP24XX_ST_MPU_WDT				(1 << 3)
+#define OMAP24XX_ST_32KSYNC				(1 << 1)
+
+/* CM_AUTOIDLE_WKUP */
+#define OMAP24XX_AUTO_OMAPCTRL				(1 << 5)
+#define OMAP24XX_AUTO_WDT1				(1 << 4)
+#define OMAP24XX_AUTO_MPU_WDT				(1 << 3)
+#define OMAP24XX_AUTO_GPIOS				(1 << 2)
+#define OMAP24XX_AUTO_32KSYNC				(1 << 1)
+#define OMAP24XX_AUTO_GPT1				(1 << 0)
+
+/* CM_CLKSEL_WKUP */
+#define OMAP24XX_CLKSEL_GPT1_SHIFT			0
+#define OMAP24XX_CLKSEL_GPT1_MASK			(0x3 << 0)
+
+/* CM_CLKEN_PLL */
+#define OMAP24XX_EN_54M_PLL_SHIFT			6
+#define OMAP24XX_EN_54M_PLL_MASK			(0x3 << 6)
+#define OMAP24XX_EN_96M_PLL_SHIFT			2
+#define OMAP24XX_EN_96M_PLL_MASK			(0x3 << 2)
+#define OMAP24XX_EN_DPLL_SHIFT				0
+#define OMAP24XX_EN_DPLL_MASK				(0x3 << 0)
+
+/* CM_IDLEST_CKGEN */
+#define OMAP24XX_ST_54M_APLL				(1 << 9)
+#define OMAP24XX_ST_96M_APLL				(1 << 8)
+#define OMAP24XX_ST_54M_CLK				(1 << 6)
+#define OMAP24XX_ST_12M_CLK				(1 << 5)
+#define OMAP24XX_ST_48M_CLK				(1 << 4)
+#define OMAP24XX_ST_96M_CLK				(1 << 2)
+#define OMAP24XX_ST_CORE_CLK_SHIFT			0
+#define OMAP24XX_ST_CORE_CLK_MASK			(0x3 << 0)
+
+/* CM_AUTOIDLE_PLL */
+#define OMAP24XX_AUTO_54M_SHIFT				6
+#define OMAP24XX_AUTO_54M_MASK				(0x3 << 6)
+#define OMAP24XX_AUTO_96M_SHIFT				2
+#define OMAP24XX_AUTO_96M_MASK				(0x3 << 2)
+#define OMAP24XX_AUTO_DPLL_SHIFT			0
+#define OMAP24XX_AUTO_DPLL_MASK				(0x3 << 0)
+
+/* CM_CLKSEL1_PLL */
+#define OMAP2430_MAXDPLLFASTLOCK_SHIFT			28
+#define OMAP2430_MAXDPLLFASTLOCK_MASK			(0x7 << 28)
+#define OMAP24XX_APLLS_CLKIN_SHIFT			23
+#define OMAP24XX_APLLS_CLKIN_MASK			(0x7 << 23)
+#define OMAP24XX_DPLL_MULT_SHIFT			12
+#define OMAP24XX_DPLL_MULT_MASK				(0x3ff << 12)
+#define OMAP24XX_DPLL_DIV_SHIFT				8
+#define OMAP24XX_DPLL_DIV_MASK				(0xf << 8)
+#define OMAP24XX_54M_SOURCE_SHIFT			5
+#define OMAP24XX_54M_SOURCE				(1 << 5)
+#define OMAP2430_96M_SOURCE_SHIFT			4
+#define OMAP2430_96M_SOURCE				(1 << 4)
+#define OMAP24XX_48M_SOURCE_SHIFT			3
+#define OMAP24XX_48M_SOURCE				(1 << 3)
+#define OMAP2430_ALTCLK_SOURCE_SHIFT			0
+#define OMAP2430_ALTCLK_SOURCE_MASK			(0x7 << 0)
+
+/* CM_CLKSEL2_PLL */
+#define OMAP24XX_CORE_CLK_SRC_SHIFT			0
+#define OMAP24XX_CORE_CLK_SRC_MASK			(0x3 << 0)
+
+/* CM_FCLKEN_DSP */
+#define OMAP2420_EN_IVA_COP_SHIFT			10
+#define OMAP2420_EN_IVA_COP				(1 << 10)
+#define OMAP2420_EN_IVA_MPU_SHIFT			8
+#define OMAP2420_EN_IVA_MPU				(1 << 8)
+#define OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT		0
+#define OMAP24XX_CM_FCLKEN_DSP_EN_DSP			(1 << 0)
+
+/* CM_ICLKEN_DSP */
+#define OMAP2420_EN_DSP_IPI_SHIFT			1
+#define OMAP2420_EN_DSP_IPI				(1 << 1)
+
+/* CM_IDLEST_DSP */
+#define OMAP2420_ST_IVA					(1 << 8)
+#define OMAP2420_ST_IPI					(1 << 1)
+#define OMAP24XX_ST_DSP					(1 << 0)
+
+/* CM_AUTOIDLE_DSP */
+#define OMAP2420_AUTO_DSP_IPI				(1 << 1)
+
+/* CM_CLKSEL_DSP */
+#define OMAP2420_SYNC_IVA				(1 << 13)
+#define OMAP2420_CLKSEL_IVA_SHIFT			8
+#define OMAP2420_CLKSEL_IVA_MASK			(0x1f << 8)
+#define OMAP24XX_SYNC_DSP				(1 << 7)
+#define OMAP24XX_CLKSEL_DSP_IF_SHIFT			5
+#define OMAP24XX_CLKSEL_DSP_IF_MASK			(0x3 << 5)
+#define OMAP24XX_CLKSEL_DSP_SHIFT			0
+#define OMAP24XX_CLKSEL_DSP_MASK			(0x1f << 0)
+
+/* CM_CLKSTCTRL_DSP */
+#define OMAP2420_AUTOSTATE_IVA				(1 << 8)
+#define OMAP24XX_AUTOSTATE_DSP				(1 << 0)
+
+/* CM_FCLKEN_MDM */
+/* 2430 only */
+#define OMAP2430_EN_OSC_SHIFT				1
+#define OMAP2430_EN_OSC					(1 << 1)
+
+/* CM_ICLKEN_MDM */
+/* 2430 only */
+#define OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT		0
+#define OMAP2430_CM_ICLKEN_MDM_EN_MDM			(1 << 0)
+
+/* CM_IDLEST_MDM specific bits */
+/* 2430 only */
+
+/* CM_AUTOIDLE_MDM */
+/* 2430 only */
+#define OMAP2430_AUTO_OSC				(1 << 1)
+#define OMAP2430_AUTO_MDM				(1 << 0)
+
+/* CM_CLKSEL_MDM */
+/* 2430 only */
+#define OMAP2430_SYNC_MDM				(1 << 4)
+#define OMAP2430_CLKSEL_MDM_SHIFT			0
+#define OMAP2430_CLKSEL_MDM_MASK			(0xf << 0)
+
+/* CM_CLKSTCTRL_MDM */
+/* 2430 only */
+#define OMAP2430_AUTOSTATE_MDM				(1 << 0)
+
+#endif
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
new file mode 100644
index 0000000..9249129
--- /dev/null
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -0,0 +1,673 @@
+#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_34XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_34XX_H
+
+/*
+ * OMAP3430 Clock Management register bits
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "cm.h"
+
+/* Bits shared between registers */
+
+/* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
+#define OMAP3430ES2_EN_MMC3_MASK			(1 << 30)
+#define OMAP3430ES2_EN_MMC3_SHIFT			30
+#define OMAP3430_EN_MSPRO				(1 << 23)
+#define OMAP3430_EN_MSPRO_SHIFT				23
+#define OMAP3430_EN_HDQ					(1 << 22)
+#define OMAP3430_EN_HDQ_SHIFT				22
+#define OMAP3430ES1_EN_FSHOSTUSB			(1 << 5)
+#define OMAP3430ES1_EN_FSHOSTUSB_SHIFT			5
+#define OMAP3430ES1_EN_D2D				(1 << 3)
+#define OMAP3430ES1_EN_D2D_SHIFT			3
+#define OMAP3430_EN_SSI					(1 << 0)
+#define OMAP3430_EN_SSI_SHIFT				0
+
+/* CM_FCLKEN3_CORE and CM_ICLKEN3_CORE shared bits */
+#define OMAP3430ES2_EN_USBTLL_SHIFT			2
+#define OMAP3430ES2_EN_USBTLL_MASK			(1 << 2)
+
+/* CM_FCLKEN_WKUP and CM_ICLKEN_WKUP shared bits */
+#define OMAP3430_EN_WDT2				(1 << 5)
+#define OMAP3430_EN_WDT2_SHIFT				5
+
+/* CM_ICLKEN_CAM, CM_FCLKEN_CAM shared bits */
+#define OMAP3430_EN_CAM					(1 << 0)
+#define OMAP3430_EN_CAM_SHIFT				0
+
+/* CM_FCLKEN_PER, CM_ICLKEN_PER shared bits */
+#define OMAP3430_EN_WDT3				(1 << 12)
+#define OMAP3430_EN_WDT3_SHIFT				12
+
+/* CM_CLKSEL2_EMU, CM_CLKSEL3_EMU shared bits */
+#define OMAP3430_OVERRIDE_ENABLE			(1 << 19)
+
+
+/* Bits specific to each register */
+
+/* CM_FCLKEN_IVA2 */
+#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2			(1 << 0)
+
+/* CM_CLKEN_PLL_IVA2 */
+#define OMAP3430_IVA2_DPLL_RAMPTIME_SHIFT		8
+#define OMAP3430_IVA2_DPLL_RAMPTIME_MASK		(0x3 << 8)
+#define OMAP3430_IVA2_DPLL_FREQSEL_SHIFT		4
+#define OMAP3430_IVA2_DPLL_FREQSEL_MASK			(0xf << 4)
+#define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT		3
+#define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_MASK		(1 << 3)
+#define OMAP3430_EN_IVA2_DPLL_SHIFT			0
+#define OMAP3430_EN_IVA2_DPLL_MASK			(0x7 << 0)
+
+/* CM_IDLEST_IVA2 */
+#define OMAP3430_ST_IVA2				(1 << 0)
+
+/* CM_IDLEST_PLL_IVA2 */
+#define OMAP3430_ST_IVA2_CLK				(1 << 0)
+
+/* CM_AUTOIDLE_PLL_IVA2 */
+#define OMAP3430_AUTO_IVA2_DPLL_SHIFT			0
+#define OMAP3430_AUTO_IVA2_DPLL_MASK			(0x7 << 0)
+
+/* CM_CLKSEL1_PLL_IVA2 */
+#define OMAP3430_IVA2_CLK_SRC_SHIFT			19
+#define OMAP3430_IVA2_CLK_SRC_MASK			(0x3 << 19)
+#define OMAP3430_IVA2_DPLL_MULT_SHIFT			8
+#define OMAP3430_IVA2_DPLL_MULT_MASK			(0x7ff << 8)
+#define OMAP3430_IVA2_DPLL_DIV_SHIFT			0
+#define OMAP3430_IVA2_DPLL_DIV_MASK			(0x7f << 0)
+
+/* CM_CLKSEL2_PLL_IVA2 */
+#define OMAP3430_IVA2_DPLL_CLKOUT_DIV_SHIFT		0
+#define OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK		(0x1f << 0)
+
+/* CM_CLKSTCTRL_IVA2 */
+#define OMAP3430_CLKTRCTRL_IVA2_SHIFT			0
+#define OMAP3430_CLKTRCTRL_IVA2_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_IVA2 */
+#define OMAP3430_CLKACTIVITY_IVA2			(1 << 0)
+
+/* CM_REVISION specific bits */
+
+/* CM_SYSCONFIG specific bits */
+
+/* CM_CLKEN_PLL_MPU */
+#define OMAP3430_MPU_DPLL_RAMPTIME_SHIFT		8
+#define OMAP3430_MPU_DPLL_RAMPTIME_MASK			(0x3 << 8)
+#define OMAP3430_MPU_DPLL_FREQSEL_SHIFT			4
+#define OMAP3430_MPU_DPLL_FREQSEL_MASK			(0xf << 4)
+#define OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT		3
+#define OMAP3430_EN_MPU_DPLL_DRIFTGUARD_MASK		(1 << 3)
+#define OMAP3430_EN_MPU_DPLL_SHIFT			0
+#define OMAP3430_EN_MPU_DPLL_MASK			(0x7 << 0)
+
+/* CM_IDLEST_MPU */
+#define OMAP3430_ST_MPU					(1 << 0)
+
+/* CM_IDLEST_PLL_MPU */
+#define OMAP3430_ST_MPU_CLK				(1 << 0)
+#define OMAP3430_ST_IVA2_CLK_MASK			(1 << 0)
+
+/* CM_IDLEST_PLL_MPU */
+#define OMAP3430_ST_MPU_CLK_MASK			(1 << 0)
+
+/* CM_AUTOIDLE_PLL_MPU */
+#define OMAP3430_AUTO_MPU_DPLL_SHIFT			0
+#define OMAP3430_AUTO_MPU_DPLL_MASK			(0x7 << 0)
+
+/* CM_CLKSEL1_PLL_MPU */
+#define OMAP3430_MPU_CLK_SRC_SHIFT			19
+#define OMAP3430_MPU_CLK_SRC_MASK			(0x3 << 19)
+#define OMAP3430_MPU_DPLL_MULT_SHIFT			8
+#define OMAP3430_MPU_DPLL_MULT_MASK			(0x7ff << 8)
+#define OMAP3430_MPU_DPLL_DIV_SHIFT			0
+#define OMAP3430_MPU_DPLL_DIV_MASK			(0x7f << 0)
+
+/* CM_CLKSEL2_PLL_MPU */
+#define OMAP3430_MPU_DPLL_CLKOUT_DIV_SHIFT		0
+#define OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK		(0x1f << 0)
+
+/* CM_CLKSTCTRL_MPU */
+#define OMAP3430_CLKTRCTRL_MPU_SHIFT			0
+#define OMAP3430_CLKTRCTRL_MPU_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_MPU */
+#define OMAP3430_CLKACTIVITY_MPU			(1 << 0)
+
+/* CM_FCLKEN1_CORE specific bits */
+
+/* CM_ICLKEN1_CORE specific bits */
+#define OMAP3430_EN_ICR					(1 << 29)
+#define OMAP3430_EN_ICR_SHIFT				29
+#define OMAP3430_EN_AES2				(1 << 28)
+#define OMAP3430_EN_AES2_SHIFT				28
+#define OMAP3430_EN_SHA12				(1 << 27)
+#define OMAP3430_EN_SHA12_SHIFT				27
+#define OMAP3430_EN_DES2				(1 << 26)
+#define OMAP3430_EN_DES2_SHIFT				26
+#define OMAP3430ES1_EN_FAC				(1 << 8)
+#define OMAP3430ES1_EN_FAC_SHIFT			8
+#define OMAP3430_EN_MAILBOXES				(1 << 7)
+#define OMAP3430_EN_MAILBOXES_SHIFT			7
+#define OMAP3430_EN_OMAPCTRL				(1 << 6)
+#define OMAP3430_EN_OMAPCTRL_SHIFT			6
+#define OMAP3430_EN_SDRC				(1 << 1)
+#define OMAP3430_EN_SDRC_SHIFT				1
+
+/* CM_ICLKEN2_CORE */
+#define OMAP3430_EN_PKA					(1 << 4)
+#define OMAP3430_EN_PKA_SHIFT				4
+#define OMAP3430_EN_AES1				(1 << 3)
+#define OMAP3430_EN_AES1_SHIFT				3
+#define OMAP3430_EN_RNG					(1 << 2)
+#define OMAP3430_EN_RNG_SHIFT				2
+#define OMAP3430_EN_SHA11				(1 << 1)
+#define OMAP3430_EN_SHA11_SHIFT				1
+#define OMAP3430_EN_DES1				(1 << 0)
+#define OMAP3430_EN_DES1_SHIFT				0
+
+/* CM_FCLKEN3_CORE specific bits */
+#define OMAP3430ES2_EN_TS_SHIFT				1
+#define OMAP3430ES2_EN_TS_MASK				(1 << 1)
+#define OMAP3430ES2_EN_CPEFUSE_SHIFT			0
+#define OMAP3430ES2_EN_CPEFUSE_MASK			(1 << 0)
+
+/* CM_IDLEST1_CORE specific bits */
+#define OMAP3430_ST_ICR					(1 << 29)
+#define OMAP3430_ST_AES2				(1 << 28)
+#define OMAP3430_ST_SHA12				(1 << 27)
+#define OMAP3430_ST_DES2				(1 << 26)
+#define OMAP3430_ST_MSPRO				(1 << 23)
+#define OMAP3430_ST_HDQ					(1 << 22)
+#define OMAP3430ES1_ST_FAC				(1 << 8)
+#define OMAP3430ES1_ST_MAILBOXES			(1 << 7)
+#define OMAP3430_ST_OMAPCTRL				(1 << 6)
+#define OMAP3430_ST_SDMA				(1 << 2)
+#define OMAP3430_ST_SDRC				(1 << 1)
+#define OMAP3430_ST_SSI					(1 << 0)
+
+/* CM_IDLEST2_CORE */
+#define OMAP3430_ST_PKA					(1 << 4)
+#define OMAP3430_ST_AES1				(1 << 3)
+#define OMAP3430_ST_RNG					(1 << 2)
+#define OMAP3430_ST_SHA11				(1 << 1)
+#define OMAP3430_ST_DES1				(1 << 0)
+
+/* CM_IDLEST3_CORE */
+#define OMAP3430ES2_ST_USBTLL_SHIFT			2
+#define OMAP3430ES2_ST_USBTLL_MASK			(1 << 2)
+
+/* CM_AUTOIDLE1_CORE */
+#define OMAP3430_AUTO_AES2				(1 << 28)
+#define OMAP3430_AUTO_AES2_SHIFT			28
+#define OMAP3430_AUTO_SHA12				(1 << 27)
+#define OMAP3430_AUTO_SHA12_SHIFT			27
+#define OMAP3430_AUTO_DES2				(1 << 26)
+#define OMAP3430_AUTO_DES2_SHIFT			26
+#define OMAP3430_AUTO_MMC2				(1 << 25)
+#define OMAP3430_AUTO_MMC2_SHIFT			25
+#define OMAP3430_AUTO_MMC1				(1 << 24)
+#define OMAP3430_AUTO_MMC1_SHIFT			24
+#define OMAP3430_AUTO_MSPRO				(1 << 23)
+#define OMAP3430_AUTO_MSPRO_SHIFT			23
+#define OMAP3430_AUTO_HDQ				(1 << 22)
+#define OMAP3430_AUTO_HDQ_SHIFT				22
+#define OMAP3430_AUTO_MCSPI4				(1 << 21)
+#define OMAP3430_AUTO_MCSPI4_SHIFT			21
+#define OMAP3430_AUTO_MCSPI3				(1 << 20)
+#define OMAP3430_AUTO_MCSPI3_SHIFT			20
+#define OMAP3430_AUTO_MCSPI2				(1 << 19)
+#define OMAP3430_AUTO_MCSPI2_SHIFT			19
+#define OMAP3430_AUTO_MCSPI1				(1 << 18)
+#define OMAP3430_AUTO_MCSPI1_SHIFT			18
+#define OMAP3430_AUTO_I2C3				(1 << 17)
+#define OMAP3430_AUTO_I2C3_SHIFT			17
+#define OMAP3430_AUTO_I2C2				(1 << 16)
+#define OMAP3430_AUTO_I2C2_SHIFT			16
+#define OMAP3430_AUTO_I2C1				(1 << 15)
+#define OMAP3430_AUTO_I2C1_SHIFT			15
+#define OMAP3430_AUTO_UART2				(1 << 14)
+#define OMAP3430_AUTO_UART2_SHIFT			14
+#define OMAP3430_AUTO_UART1				(1 << 13)
+#define OMAP3430_AUTO_UART1_SHIFT			13
+#define OMAP3430_AUTO_GPT11				(1 << 12)
+#define OMAP3430_AUTO_GPT11_SHIFT			12
+#define OMAP3430_AUTO_GPT10				(1 << 11)
+#define OMAP3430_AUTO_GPT10_SHIFT			11
+#define OMAP3430_AUTO_MCBSP5				(1 << 10)
+#define OMAP3430_AUTO_MCBSP5_SHIFT			10
+#define OMAP3430_AUTO_MCBSP1				(1 << 9)
+#define OMAP3430_AUTO_MCBSP1_SHIFT			9
+#define OMAP3430ES1_AUTO_FAC				(1 << 8)
+#define OMAP3430ES1_AUTO_FAC_SHIFT			8
+#define OMAP3430_AUTO_MAILBOXES				(1 << 7)
+#define OMAP3430_AUTO_MAILBOXES_SHIFT			7
+#define OMAP3430_AUTO_OMAPCTRL				(1 << 6)
+#define OMAP3430_AUTO_OMAPCTRL_SHIFT			6
+#define OMAP3430ES1_AUTO_FSHOSTUSB			(1 << 5)
+#define OMAP3430ES1_AUTO_FSHOSTUSB_SHIFT		5
+#define OMAP3430_AUTO_HSOTGUSB				(1 << 4)
+#define OMAP3430_AUTO_HSOTGUSB_SHIFT			4
+#define OMAP3430ES1_AUTO_D2D				(1 << 3)
+#define OMAP3430ES1_AUTO_D2D_SHIFT			3
+#define OMAP3430_AUTO_SSI				(1 << 0)
+#define OMAP3430_AUTO_SSI_SHIFT				0
+
+/* CM_AUTOIDLE2_CORE */
+#define OMAP3430_AUTO_PKA				(1 << 4)
+#define OMAP3430_AUTO_PKA_SHIFT				4
+#define OMAP3430_AUTO_AES1				(1 << 3)
+#define OMAP3430_AUTO_AES1_SHIFT			3
+#define OMAP3430_AUTO_RNG				(1 << 2)
+#define OMAP3430_AUTO_RNG_SHIFT				2
+#define OMAP3430_AUTO_SHA11				(1 << 1)
+#define OMAP3430_AUTO_SHA11_SHIFT			1
+#define OMAP3430_AUTO_DES1				(1 << 0)
+#define OMAP3430_AUTO_DES1_SHIFT			0
+
+/* CM_AUTOIDLE3_CORE */
+#define OMAP3430ES2_AUTO_USBTLL_SHIFT			2
+#define OMAP3430ES2_AUTO_USBTLL_MASK			(1 << 2)
+
+/* CM_CLKSEL_CORE */
+#define OMAP3430_CLKSEL_SSI_SHIFT			8
+#define OMAP3430_CLKSEL_SSI_MASK			(0xf << 8)
+#define OMAP3430_CLKSEL_GPT11_MASK			(1 << 7)
+#define OMAP3430_CLKSEL_GPT11_SHIFT			7
+#define OMAP3430_CLKSEL_GPT10_MASK			(1 << 6)
+#define OMAP3430_CLKSEL_GPT10_SHIFT			6
+#define OMAP3430ES1_CLKSEL_FSHOSTUSB_SHIFT		4
+#define OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK		(0x3 << 4)
+#define OMAP3430_CLKSEL_L4_SHIFT			2
+#define OMAP3430_CLKSEL_L4_MASK				(0x3 << 2)
+#define OMAP3430_CLKSEL_L3_SHIFT			0
+#define OMAP3430_CLKSEL_L3_MASK				(0x3 << 0)
+
+/* CM_CLKSTCTRL_CORE */
+#define OMAP3430ES1_CLKTRCTRL_D2D_SHIFT			4
+#define OMAP3430ES1_CLKTRCTRL_D2D_MASK			(0x3 << 4)
+#define OMAP3430_CLKTRCTRL_L4_SHIFT			2
+#define OMAP3430_CLKTRCTRL_L4_MASK			(0x3 << 2)
+#define OMAP3430_CLKTRCTRL_L3_SHIFT			0
+#define OMAP3430_CLKTRCTRL_L3_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_CORE */
+#define OMAP3430ES1_CLKACTIVITY_D2D			(1 << 2)
+#define OMAP3430_CLKACTIVITY_L4				(1 << 1)
+#define OMAP3430_CLKACTIVITY_L3				(1 << 0)
+
+/* CM_FCLKEN_GFX */
+#define OMAP3430ES1_EN_3D				(1 << 2)
+#define OMAP3430ES1_EN_3D_SHIFT				2
+#define OMAP3430ES1_EN_2D				(1 << 1)
+#define OMAP3430ES1_EN_2D_SHIFT				1
+
+/* CM_ICLKEN_GFX specific bits */
+
+/* CM_IDLEST_GFX specific bits */
+
+/* CM_CLKSEL_GFX specific bits */
+
+/* CM_SLEEPDEP_GFX specific bits */
+
+/* CM_CLKSTCTRL_GFX */
+#define OMAP3430ES1_CLKTRCTRL_GFX_SHIFT			0
+#define OMAP3430ES1_CLKTRCTRL_GFX_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_GFX */
+#define OMAP3430ES1_CLKACTIVITY_GFX			(1 << 0)
+
+/* CM_FCLKEN_SGX */
+#define OMAP3430ES2_EN_SGX_SHIFT			1
+#define OMAP3430ES2_EN_SGX_MASK				(1 << 1)
+
+/* CM_CLKSEL_SGX */
+#define OMAP3430ES2_CLKSEL_SGX_SHIFT			0
+#define OMAP3430ES2_CLKSEL_SGX_MASK			(0x7 << 0)
+
+/* CM_FCLKEN_WKUP specific bits */
+#define OMAP3430ES2_EN_USIMOCP_SHIFT			9
+
+/* CM_ICLKEN_WKUP specific bits */
+#define OMAP3430_EN_WDT1				(1 << 4)
+#define OMAP3430_EN_WDT1_SHIFT				4
+#define OMAP3430_EN_32KSYNC				(1 << 2)
+#define OMAP3430_EN_32KSYNC_SHIFT			2
+
+/* CM_IDLEST_WKUP specific bits */
+#define OMAP3430_ST_WDT2				(1 << 5)
+#define OMAP3430_ST_WDT1				(1 << 4)
+#define OMAP3430_ST_32KSYNC				(1 << 2)
+
+/* CM_AUTOIDLE_WKUP */
+#define OMAP3430_AUTO_WDT2				(1 << 5)
+#define OMAP3430_AUTO_WDT2_SHIFT			5
+#define OMAP3430_AUTO_WDT1				(1 << 4)
+#define OMAP3430_AUTO_WDT1_SHIFT			4
+#define OMAP3430_AUTO_GPIO1				(1 << 3)
+#define OMAP3430_AUTO_GPIO1_SHIFT			3
+#define OMAP3430_AUTO_32KSYNC				(1 << 2)
+#define OMAP3430_AUTO_32KSYNC_SHIFT			2
+#define OMAP3430_AUTO_GPT12				(1 << 1)
+#define OMAP3430_AUTO_GPT12_SHIFT			1
+#define OMAP3430_AUTO_GPT1				(1 << 0)
+#define OMAP3430_AUTO_GPT1_SHIFT			0
+
+/* CM_CLKSEL_WKUP */
+#define OMAP3430ES2_CLKSEL_USIMOCP_MASK			(0xf << 3)
+#define OMAP3430_CLKSEL_RM_SHIFT			1
+#define OMAP3430_CLKSEL_RM_MASK				(0x3 << 1)
+#define OMAP3430_CLKSEL_GPT1_SHIFT			0
+#define OMAP3430_CLKSEL_GPT1_MASK			(1 << 0)
+
+/* CM_CLKEN_PLL */
+#define OMAP3430_PWRDN_EMU_PERIPH_SHIFT			31
+#define OMAP3430_PWRDN_CAM_SHIFT			30
+#define OMAP3430_PWRDN_DSS1_SHIFT			29
+#define OMAP3430_PWRDN_TV_SHIFT				28
+#define OMAP3430_PWRDN_96M_SHIFT			27
+#define OMAP3430_PERIPH_DPLL_RAMPTIME_SHIFT		24
+#define OMAP3430_PERIPH_DPLL_RAMPTIME_MASK		(0x3 << 24)
+#define OMAP3430_PERIPH_DPLL_FREQSEL_SHIFT		20
+#define OMAP3430_PERIPH_DPLL_FREQSEL_MASK		(0xf << 20)
+#define OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT	19
+#define OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_MASK		(1 << 19)
+#define OMAP3430_EN_PERIPH_DPLL_SHIFT			16
+#define OMAP3430_EN_PERIPH_DPLL_MASK			(0x7 << 16)
+#define OMAP3430_PWRDN_EMU_CORE_SHIFT			12
+#define OMAP3430_CORE_DPLL_RAMPTIME_SHIFT		8
+#define OMAP3430_CORE_DPLL_RAMPTIME_MASK		(0x3 << 8)
+#define OMAP3430_CORE_DPLL_FREQSEL_SHIFT		4
+#define OMAP3430_CORE_DPLL_FREQSEL_MASK			(0xf << 4)
+#define OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT		3
+#define OMAP3430_EN_CORE_DPLL_DRIFTGUARD_MASK		(1 << 3)
+#define OMAP3430_EN_CORE_DPLL_SHIFT			0
+#define OMAP3430_EN_CORE_DPLL_MASK			(0x7 << 0)
+
+/* CM_CLKEN2_PLL */
+#define OMAP3430ES2_EN_PERIPH2_DPLL_LPMODE_SHIFT		10
+#define OMAP3430ES2_PERIPH2_DPLL_RAMPTIME_MASK		(0x3 << 8)
+#define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_SHIFT		4
+#define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK		(0xf << 4)
+#define OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT	3
+#define OMAP3430ES2_EN_PERIPH2_DPLL_SHIFT		0
+#define OMAP3430ES2_EN_PERIPH2_DPLL_MASK		(0x7 << 0)
+
+/* CM_IDLEST_CKGEN */
+#define OMAP3430_ST_54M_CLK				(1 << 5)
+#define OMAP3430_ST_12M_CLK				(1 << 4)
+#define OMAP3430_ST_48M_CLK				(1 << 3)
+#define OMAP3430_ST_96M_CLK				(1 << 2)
+#define OMAP3430_ST_PERIPH_CLK				(1 << 1)
+#define OMAP3430_ST_CORE_CLK				(1 << 0)
+
+/* CM_IDLEST2_CKGEN */
+#define OMAP3430ES2_ST_120M_CLK_SHIFT			1
+#define OMAP3430ES2_ST_120M_CLK_MASK			(1 << 1)
+#define OMAP3430ES2_ST_PERIPH2_CLK_SHIFT		0
+#define OMAP3430ES2_ST_PERIPH2_CLK_MASK			(1 << 0)
+
+/* CM_AUTOIDLE_PLL */
+#define OMAP3430_AUTO_PERIPH_DPLL_SHIFT			3
+#define OMAP3430_AUTO_PERIPH_DPLL_MASK			(0x7 << 3)
+#define OMAP3430_AUTO_CORE_DPLL_SHIFT			0
+#define OMAP3430_AUTO_CORE_DPLL_MASK			(0x7 << 0)
+
+/* CM_CLKSEL1_PLL */
+/* Note that OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK was (0x3 << 27) on 3430ES1 */
+#define OMAP3430_CORE_DPLL_CLKOUT_DIV_SHIFT		27
+#define OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK		(0x1f << 27)
+#define OMAP3430_CORE_DPLL_MULT_SHIFT			16
+#define OMAP3430_CORE_DPLL_MULT_MASK			(0x7ff << 16)
+#define OMAP3430_CORE_DPLL_DIV_SHIFT			8
+#define OMAP3430_CORE_DPLL_DIV_MASK			(0x7f << 8)
+#define OMAP3430_SOURCE_54M				(1 << 5)
+#define OMAP3430_SOURCE_48M				(1 << 3)
+
+/* CM_CLKSEL2_PLL */
+#define OMAP3430_PERIPH_DPLL_MULT_SHIFT			8
+#define OMAP3430_PERIPH_DPLL_MULT_MASK			(0x7ff << 8)
+#define OMAP3430_PERIPH_DPLL_DIV_SHIFT			0
+#define OMAP3430_PERIPH_DPLL_DIV_MASK			(0x7f << 0)
+
+/* CM_CLKSEL3_PLL */
+#define OMAP3430_DIV_96M_SHIFT				0
+#define OMAP3430_DIV_96M_MASK				(0x1f << 0)
+
+/* CM_CLKSEL4_PLL */
+#define OMAP3430ES2_PERIPH2_DPLL_MULT_SHIFT		8
+#define OMAP3430ES2_PERIPH2_DPLL_MULT_MASK		(0x7ff << 8)
+#define OMAP3430ES2_PERIPH2_DPLL_DIV_SHIFT		0
+#define OMAP3430ES2_PERIPH2_DPLL_DIV_MASK		(0x7f << 0)
+
+/* CM_CLKSEL5_PLL */
+#define OMAP3430ES2_DIV_120M_SHIFT			0
+#define OMAP3430ES2_DIV_120M_MASK			(0x1f << 0)
+
+/* CM_CLKOUT_CTRL */
+#define OMAP3430_CLKOUT2_EN_SHIFT			7
+#define OMAP3430_CLKOUT2_EN				(1 << 7)
+#define OMAP3430_CLKOUT2_DIV_SHIFT			3
+#define OMAP3430_CLKOUT2_DIV_MASK			(0x7 << 3)
+#define OMAP3430_CLKOUT2SOURCE_SHIFT			0
+#define OMAP3430_CLKOUT2SOURCE_MASK			(0x3 << 0)
+
+/* CM_FCLKEN_DSS */
+#define OMAP3430_EN_TV					(1 << 2)
+#define OMAP3430_EN_TV_SHIFT				2
+#define OMAP3430_EN_DSS2				(1 << 1)
+#define OMAP3430_EN_DSS2_SHIFT				1
+#define OMAP3430_EN_DSS1				(1 << 0)
+#define OMAP3430_EN_DSS1_SHIFT				0
+
+/* CM_ICLKEN_DSS */
+#define OMAP3430_CM_ICLKEN_DSS_EN_DSS			(1 << 0)
+#define OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT		0
+
+/* CM_IDLEST_DSS */
+#define OMAP3430_ST_DSS					(1 << 0)
+
+/* CM_AUTOIDLE_DSS */
+#define OMAP3430_AUTO_DSS				(1 << 0)
+#define OMAP3430_AUTO_DSS_SHIFT				0
+
+/* CM_CLKSEL_DSS */
+#define OMAP3430_CLKSEL_TV_SHIFT			8
+#define OMAP3430_CLKSEL_TV_MASK				(0x1f << 8)
+#define OMAP3430_CLKSEL_DSS1_SHIFT			0
+#define OMAP3430_CLKSEL_DSS1_MASK			(0x1f << 0)
+
+/* CM_SLEEPDEP_DSS specific bits */
+
+/* CM_CLKSTCTRL_DSS */
+#define OMAP3430_CLKTRCTRL_DSS_SHIFT			0
+#define OMAP3430_CLKTRCTRL_DSS_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_DSS */
+#define OMAP3430_CLKACTIVITY_DSS			(1 << 0)
+
+/* CM_FCLKEN_CAM specific bits */
+
+/* CM_ICLKEN_CAM specific bits */
+
+/* CM_IDLEST_CAM */
+#define OMAP3430_ST_CAM					(1 << 0)
+
+/* CM_AUTOIDLE_CAM */
+#define OMAP3430_AUTO_CAM				(1 << 0)
+#define OMAP3430_AUTO_CAM_SHIFT				0
+
+/* CM_CLKSEL_CAM */
+#define OMAP3430_CLKSEL_CAM_SHIFT			0
+#define OMAP3430_CLKSEL_CAM_MASK			(0x1f << 0)
+
+/* CM_SLEEPDEP_CAM specific bits */
+
+/* CM_CLKSTCTRL_CAM */
+#define OMAP3430_CLKTRCTRL_CAM_SHIFT			0
+#define OMAP3430_CLKTRCTRL_CAM_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_CAM */
+#define OMAP3430_CLKACTIVITY_CAM			(1 << 0)
+
+/* CM_FCLKEN_PER specific bits */
+
+/* CM_ICLKEN_PER specific bits */
+
+/* CM_IDLEST_PER */
+#define OMAP3430_ST_WDT3				(1 << 12)
+#define OMAP3430_ST_MCBSP4				(1 << 2)
+#define OMAP3430_ST_MCBSP3				(1 << 1)
+#define OMAP3430_ST_MCBSP2				(1 << 0)
+
+/* CM_AUTOIDLE_PER */
+#define OMAP3430_AUTO_GPIO6				(1 << 17)
+#define OMAP3430_AUTO_GPIO6_SHIFT			17
+#define OMAP3430_AUTO_GPIO5				(1 << 16)
+#define OMAP3430_AUTO_GPIO5_SHIFT			16
+#define OMAP3430_AUTO_GPIO4				(1 << 15)
+#define OMAP3430_AUTO_GPIO4_SHIFT			15
+#define OMAP3430_AUTO_GPIO3				(1 << 14)
+#define OMAP3430_AUTO_GPIO3_SHIFT			14
+#define OMAP3430_AUTO_GPIO2				(1 << 13)
+#define OMAP3430_AUTO_GPIO2_SHIFT			13
+#define OMAP3430_AUTO_WDT3				(1 << 12)
+#define OMAP3430_AUTO_WDT3_SHIFT			12
+#define OMAP3430_AUTO_UART3				(1 << 11)
+#define OMAP3430_AUTO_UART3_SHIFT			11
+#define OMAP3430_AUTO_GPT9				(1 << 10)
+#define OMAP3430_AUTO_GPT9_SHIFT			10
+#define OMAP3430_AUTO_GPT8				(1 << 9)
+#define OMAP3430_AUTO_GPT8_SHIFT			9
+#define OMAP3430_AUTO_GPT7				(1 << 8)
+#define OMAP3430_AUTO_GPT7_SHIFT			8
+#define OMAP3430_AUTO_GPT6				(1 << 7)
+#define OMAP3430_AUTO_GPT6_SHIFT			7
+#define OMAP3430_AUTO_GPT5				(1 << 6)
+#define OMAP3430_AUTO_GPT5_SHIFT			6
+#define OMAP3430_AUTO_GPT4				(1 << 5)
+#define OMAP3430_AUTO_GPT4_SHIFT			5
+#define OMAP3430_AUTO_GPT3				(1 << 4)
+#define OMAP3430_AUTO_GPT3_SHIFT			4
+#define OMAP3430_AUTO_GPT2				(1 << 3)
+#define OMAP3430_AUTO_GPT2_SHIFT			3
+#define OMAP3430_AUTO_MCBSP4				(1 << 2)
+#define OMAP3430_AUTO_MCBSP4_SHIFT			2
+#define OMAP3430_AUTO_MCBSP3				(1 << 1)
+#define OMAP3430_AUTO_MCBSP3_SHIFT			1
+#define OMAP3430_AUTO_MCBSP2				(1 << 0)
+#define OMAP3430_AUTO_MCBSP2_SHIFT			0
+
+/* CM_CLKSEL_PER */
+#define OMAP3430_CLKSEL_GPT9_MASK			(1 << 7)
+#define OMAP3430_CLKSEL_GPT9_SHIFT			7
+#define OMAP3430_CLKSEL_GPT8_MASK			(1 << 6)
+#define OMAP3430_CLKSEL_GPT8_SHIFT			6
+#define OMAP3430_CLKSEL_GPT7_MASK			(1 << 5)
+#define OMAP3430_CLKSEL_GPT7_SHIFT			5
+#define OMAP3430_CLKSEL_GPT6_MASK			(1 << 4)
+#define OMAP3430_CLKSEL_GPT6_SHIFT			4
+#define OMAP3430_CLKSEL_GPT5_MASK			(1 << 3)
+#define OMAP3430_CLKSEL_GPT5_SHIFT			3
+#define OMAP3430_CLKSEL_GPT4_MASK			(1 << 2)
+#define OMAP3430_CLKSEL_GPT4_SHIFT			2
+#define OMAP3430_CLKSEL_GPT3_MASK			(1 << 1)
+#define OMAP3430_CLKSEL_GPT3_SHIFT			1
+#define OMAP3430_CLKSEL_GPT2_MASK			(1 << 0)
+#define OMAP3430_CLKSEL_GPT2_SHIFT			0
+
+/* CM_SLEEPDEP_PER specific bits */
+#define OMAP3430_CM_SLEEPDEP_PER_EN_IVA2		(1 << 2)
+
+/* CM_CLKSTCTRL_PER */
+#define OMAP3430_CLKTRCTRL_PER_SHIFT			0
+#define OMAP3430_CLKTRCTRL_PER_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_PER */
+#define OMAP3430_CLKACTIVITY_PER			(1 << 0)
+
+/* CM_CLKSEL1_EMU */
+#define OMAP3430_DIV_DPLL4_SHIFT			24
+#define OMAP3430_DIV_DPLL4_MASK				(0x1f << 24)
+#define OMAP3430_DIV_DPLL3_SHIFT			16
+#define OMAP3430_DIV_DPLL3_MASK				(0x1f << 16)
+#define OMAP3430_CLKSEL_TRACECLK_SHIFT			11
+#define OMAP3430_CLKSEL_TRACECLK_MASK			(0x7 << 11)
+#define OMAP3430_CLKSEL_PCLK_SHIFT			8
+#define OMAP3430_CLKSEL_PCLK_MASK			(0x7 << 8)
+#define OMAP3430_CLKSEL_PCLKX2_SHIFT			6
+#define OMAP3430_CLKSEL_PCLKX2_MASK			(0x3 << 6)
+#define OMAP3430_CLKSEL_ATCLK_SHIFT			4
+#define OMAP3430_CLKSEL_ATCLK_MASK			(0x3 << 4)
+#define OMAP3430_TRACE_MUX_CTRL_SHIFT			2
+#define OMAP3430_TRACE_MUX_CTRL_MASK			(0x3 << 2)
+#define OMAP3430_MUX_CTRL_SHIFT				0
+#define OMAP3430_MUX_CTRL_MASK				(0x3 << 0)
+
+/* CM_CLKSTCTRL_EMU */
+#define OMAP3430_CLKTRCTRL_EMU_SHIFT			0
+#define OMAP3430_CLKTRCTRL_EMU_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_EMU */
+#define OMAP3430_CLKACTIVITY_EMU			(1 << 0)
+
+/* CM_CLKSEL2_EMU specific bits */
+#define OMAP3430_CORE_DPLL_EMU_MULT_SHIFT		8
+#define OMAP3430_CORE_DPLL_EMU_MULT_MASK		(0x7ff << 8)
+#define OMAP3430_CORE_DPLL_EMU_DIV_SHIFT		0
+#define OMAP3430_CORE_DPLL_EMU_DIV_MASK			(0x7f << 0)
+
+/* CM_CLKSEL3_EMU specific bits */
+#define OMAP3430_PERIPH_DPLL_EMU_MULT_SHIFT		8
+#define OMAP3430_PERIPH_DPLL_EMU_MULT_MASK		(0x7ff << 8)
+#define OMAP3430_PERIPH_DPLL_EMU_DIV_SHIFT		0
+#define OMAP3430_PERIPH_DPLL_EMU_DIV_MASK		(0x7f << 0)
+
+/* CM_POLCTRL */
+#define OMAP3430_CLKOUT2_POL				(1 << 0)
+
+/* CM_IDLEST_NEON */
+#define OMAP3430_ST_NEON				(1 << 0)
+
+/* CM_CLKSTCTRL_NEON */
+#define OMAP3430_CLKTRCTRL_NEON_SHIFT			0
+#define OMAP3430_CLKTRCTRL_NEON_MASK			(0x3 << 0)
+
+/* CM_FCLKEN_USBHOST */
+#define OMAP3430ES2_EN_USBHOST2_SHIFT			1
+#define OMAP3430ES2_EN_USBHOST2_MASK			(1 << 1)
+#define OMAP3430ES2_EN_USBHOST1_SHIFT			0
+#define OMAP3430ES2_EN_USBHOST1_MASK			(1 << 0)
+
+/* CM_ICLKEN_USBHOST */
+#define OMAP3430ES2_EN_USBHOST_SHIFT			0
+#define OMAP3430ES2_EN_USBHOST_MASK			(1 << 0)
+
+/* CM_IDLEST_USBHOST */
+
+/* CM_AUTOIDLE_USBHOST */
+#define OMAP3430ES2_AUTO_USBHOST_SHIFT			0
+#define OMAP3430ES2_AUTO_USBHOST_MASK			(1 << 0)
+
+/* CM_SLEEPDEP_USBHOST */
+#define OMAP3430ES2_EN_MPU_SHIFT			1
+#define OMAP3430ES2_EN_MPU_MASK				(1 << 1)
+#define OMAP3430ES2_EN_IVA2_SHIFT			2
+#define OMAP3430ES2_EN_IVA2_MASK			(1 << 2)
+
+/* CM_CLKSTCTRL_USBHOST */
+#define OMAP3430ES2_CLKTRCTRL_USBHOST_SHIFT		0
+#define OMAP3430ES2_CLKTRCTRL_USBHOST_MASK		(3 << 0)
+
+
+
+#endif
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
new file mode 100644
index 0000000..8489f302
--- /dev/null
+++ b/arch/arm/mach-omap2/cm.h
@@ -0,0 +1,124 @@
+#ifndef __ARCH_ASM_MACH_OMAP2_CM_H
+#define __ARCH_ASM_MACH_OMAP2_CM_H
+
+/*
+ * OMAP2/3 Clock Management (CM) register definitions
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "prcm-common.h"
+
+#ifndef __ASSEMBLER__
+#define OMAP_CM_REGADDR(module, reg)					\
+	(void __iomem *)IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
+#else
+#define OMAP2420_CM_REGADDR(module, reg)				\
+			IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
+#define OMAP2430_CM_REGADDR(module, reg)				\
+			IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
+#define OMAP34XX_CM_REGADDR(module, reg)				\
+			IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
+#endif
+
+/*
+ * Architecture-specific global CM registers
+ * Use cm_{read,write}_reg() with these registers.
+ * These registers appear once per CM module.
+ */
+
+#define OMAP3430_CM_REVISION		OMAP_CM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP3430_CM_SYSCONFIG		OMAP_CM_REGADDR(OCP_MOD, 0x0010)
+#define OMAP3430_CM_POLCTRL		OMAP_CM_REGADDR(OCP_MOD, 0x009c)
+
+#define OMAP3430_CM_CLKOUT_CTRL		OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+
+/*
+ * Module specific CM registers from CM_BASE + domain offset
+ * Use cm_{read,write}_mod_reg() with these registers.
+ * These register offsets generally appear in more than one PRCM submodule.
+ */
+
+/* Common between 24xx and 34xx */
+
+#define CM_FCLKEN					0x0000
+#define CM_FCLKEN1					CM_FCLKEN
+#define CM_CLKEN					CM_FCLKEN
+#define CM_ICLKEN					0x0010
+#define CM_ICLKEN1					CM_ICLKEN
+#define CM_ICLKEN2					0x0014
+#define CM_ICLKEN3					0x0018
+#define CM_IDLEST					0x0020
+#define CM_IDLEST1					CM_IDLEST
+#define CM_IDLEST2					0x0024
+#define CM_AUTOIDLE					0x0030
+#define CM_AUTOIDLE1					CM_AUTOIDLE
+#define CM_AUTOIDLE2					0x0034
+#define CM_AUTOIDLE3					0x0038
+#define CM_CLKSEL					0x0040
+#define CM_CLKSEL1					CM_CLKSEL
+#define CM_CLKSEL2					0x0044
+#define CM_CLKSTCTRL					0x0048
+
+
+/* Architecture-specific registers */
+
+#define OMAP24XX_CM_FCLKEN2				0x0004
+#define OMAP24XX_CM_ICLKEN4				0x001c
+#define OMAP24XX_CM_AUTOIDLE4				0x003c
+
+#define OMAP2430_CM_IDLEST3				0x0028
+
+#define OMAP3430_CM_CLKEN_PLL				0x0004
+#define OMAP3430ES2_CM_CLKEN2				0x0004
+#define OMAP3430ES2_CM_FCLKEN3				0x0008
+#define OMAP3430_CM_IDLEST_PLL				CM_IDLEST2
+#define OMAP3430_CM_AUTOIDLE_PLL			CM_AUTOIDLE2
+#define OMAP3430_CM_CLKSEL1				CM_CLKSEL
+#define OMAP3430_CM_CLKSEL1_PLL				CM_CLKSEL
+#define OMAP3430_CM_CLKSEL2_PLL				CM_CLKSEL2
+#define OMAP3430_CM_SLEEPDEP				CM_CLKSEL2
+#define OMAP3430_CM_CLKSEL3				CM_CLKSTCTRL
+#define OMAP3430_CM_CLKSTST				0x004c
+#define OMAP3430ES2_CM_CLKSEL4				0x004c
+#define OMAP3430ES2_CM_CLKSEL5				0x0050
+#define OMAP3430_CM_CLKSEL2_EMU				0x0050
+#define OMAP3430_CM_CLKSEL3_EMU				0x0054
+
+
+/* Clock management domain register get/set */
+
+#ifndef __ASSEMBLER__
+static inline void cm_write_mod_reg(u32 val, s16 module, s16 idx)
+{
+	__raw_writel(val, OMAP_CM_REGADDR(module, idx));
+}
+
+static inline u32 cm_read_mod_reg(s16 module, s16 idx)
+{
+	return __raw_readl(OMAP_CM_REGADDR(module, idx));
+}
+#endif
+
+/* CM register bits shared between 24XX and 3430 */
+
+/* CM_CLKSEL_GFX */
+#define OMAP_CLKSEL_GFX_SHIFT				0
+#define OMAP_CLKSEL_GFX_MASK				(0x7 << 0)
+
+/* CM_ICLKEN_GFX */
+#define OMAP_EN_GFX_SHIFT				0
+#define OMAP_EN_GFX					(1 << 0)
+
+/* CM_IDLEST_GFX */
+#define OMAP_ST_GFX					(1 << 0)
+
+
+#endif
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
new file mode 100644
index 0000000..a5d86a4
--- /dev/null
+++ b/arch/arm/mach-omap2/control.c
@@ -0,0 +1,74 @@
+/*
+ * OMAP2/3 System Control Module register access
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/control.h>
+
+static u32 omap2_ctrl_base;
+
+#define OMAP_CTRL_REGADDR(reg)	(void __iomem *)IO_ADDRESS(omap2_ctrl_base \
+								+ (reg))
+
+void omap_ctrl_base_set(u32 base)
+{
+	omap2_ctrl_base = base;
+}
+
+u32 omap_ctrl_base_get(void)
+{
+	return omap2_ctrl_base;
+}
+
+u8 omap_ctrl_readb(u16 offset)
+{
+	return __raw_readb(OMAP_CTRL_REGADDR(offset));
+}
+
+u16 omap_ctrl_readw(u16 offset)
+{
+	return __raw_readw(OMAP_CTRL_REGADDR(offset));
+}
+
+u32 omap_ctrl_readl(u16 offset)
+{
+	return __raw_readl(OMAP_CTRL_REGADDR(offset));
+}
+
+void omap_ctrl_writeb(u8 val, u16 offset)
+{
+	pr_debug("omap_ctrl_writeb: writing 0x%0x to 0x%0x\n", val,
+		 (u32)OMAP_CTRL_REGADDR(offset));
+
+	__raw_writeb(val, OMAP_CTRL_REGADDR(offset));
+}
+
+void omap_ctrl_writew(u16 val, u16 offset)
+{
+	pr_debug("omap_ctrl_writew: writing 0x%0x to 0x%0x\n", val,
+		 (u32)OMAP_CTRL_REGADDR(offset));
+
+	__raw_writew(val, OMAP_CTRL_REGADDR(offset));
+}
+
+void omap_ctrl_writel(u32 val, u16 offset)
+{
+	pr_debug("omap_ctrl_writel: writing 0x%0x to 0x%0x\n", val,
+		 (u32)OMAP_CTRL_REGADDR(offset));
+
+	__raw_writel(val, OMAP_CTRL_REGADDR(offset));
+}
+
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 5a4cc20..02cede2 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -69,7 +69,7 @@
 static void __iomem *gpmc_cs_base =
 	(void __iomem *) IO_ADDRESS(GPMC_BASE) + GPMC_CS0;
 
-static struct clk *gpmc_l3_clk;
+static struct clk *gpmc_fck;
 
 static void gpmc_write_reg(int idx, u32 val)
 {
@@ -94,11 +94,10 @@
 	return __raw_readl(gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx);
 }
 
-/* TODO: Add support for gpmc_fck to clock framework and use it */
 unsigned long gpmc_get_fclk_period(void)
 {
 	/* In picoseconds */
-	return 1000000000 / ((clk_get_rate(gpmc_l3_clk)) / 1000);
+	return 1000000000 / ((clk_get_rate(gpmc_fck)) / 1000);
 }
 
 unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
@@ -398,8 +397,11 @@
 {
 	u32 l;
 
-	gpmc_l3_clk = clk_get(NULL, "core_l3_ck");
-	BUG_ON(IS_ERR(gpmc_l3_clk));
+	gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */
+	if (IS_ERR(gpmc_fck))
+		WARN_ON(1);
+	else
+		clk_enable(gpmc_fck);
 
 	l = gpmc_read_reg(GPMC_REVISION);
 	printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index 3e5d8cd..1247908 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -27,11 +27,16 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/sram.h>
 
-#include "prcm-regs.h"
-#include "memory.h"
+#include "prm.h"
 
+#include "memory.h"
+#include "sdrc.h"
+
+unsigned long omap2_sdrc_base;
+unsigned long omap2_sms_base;
 
 static struct memory_timings mem_timings;
+static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2;
 
 u32 omap2_memory_get_slow_dll_ctrl(void)
 {
@@ -48,12 +53,60 @@
 	return mem_timings.m_type;
 }
 
+/*
+ * Check the DLL lock state, and return tue if running in unlock mode.
+ * This is needed to compensate for the shifted DLL value in unlock mode.
+ */
+u32 omap2_dll_force_needed(void)
+{
+	/* dlla and dllb are a set */
+	u32 dll_state = sdrc_read_reg(SDRC_DLLA_CTRL);
+
+	if ((dll_state & (1 << 2)) == (1 << 2))
+		return 1;
+	else
+		return 0;
+}
+
+/*
+ * 'level' is the value to store to CM_CLKSEL2_PLL.CORE_CLK_SRC.
+ * Practical values are CORE_CLK_SRC_DPLL (for CORE_CLK = DPLL_CLK) or
+ * CORE_CLK_SRC_DPLL_X2 (for CORE_CLK = * DPLL_CLK * 2)
+ */
+u32 omap2_reprogram_sdrc(u32 level, u32 force)
+{
+	u32 dll_ctrl, m_type;
+	u32 prev = curr_perf_level;
+	unsigned long flags;
+
+	if ((curr_perf_level == level) && !force)
+		return prev;
+
+	if (level == CORE_CLK_SRC_DPLL) {
+		dll_ctrl = omap2_memory_get_slow_dll_ctrl();
+	} else if (level == CORE_CLK_SRC_DPLL_X2) {
+		dll_ctrl = omap2_memory_get_fast_dll_ctrl();
+	} else {
+		return prev;
+	}
+
+	m_type = omap2_memory_get_type();
+
+	local_irq_save(flags);
+	__raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP);
+	omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
+	curr_perf_level = level;
+	local_irq_restore(flags);
+
+	return prev;
+}
+
 void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
 {
 	unsigned long dll_cnt;
 	u32 fast_dll = 0;
 
-	mem_timings.m_type = !((SDRC_MR_0 & 0x3) == 0x1); /* DDR = 1, SDR = 0 */
+	mem_timings.m_type = !((sdrc_read_reg(SDRC_MR_0) & 0x3) == 0x1); /* DDR = 1, SDR = 0 */
 
 	/* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others.
 	 * In the case of 2422, its ok to use CS1 instead of CS0.
@@ -73,11 +126,11 @@
 		mem_timings.dll_mode = M_LOCK;
 
 	if (mem_timings.base_cs == 0) {
-		fast_dll = SDRC_DLLA_CTRL;
-		dll_cnt = SDRC_DLLA_STATUS & 0xff00;
+		fast_dll = sdrc_read_reg(SDRC_DLLA_CTRL);
+		dll_cnt = sdrc_read_reg(SDRC_DLLA_STATUS) & 0xff00;
 	} else {
-		fast_dll = SDRC_DLLB_CTRL;
-		dll_cnt = SDRC_DLLB_STATUS & 0xff00;
+		fast_dll = sdrc_read_reg(SDRC_DLLB_CTRL);
+		dll_cnt = sdrc_read_reg(SDRC_DLLB_STATUS) & 0xff00;
 	}
 	if (force_lock_to_unlock_mode) {
 		fast_dll &= ~0xff00;
@@ -106,14 +159,13 @@
 {
 	u32 l;
 
-	l = SMS_SYSCONFIG;
+	l = sms_read_reg(SMS_SYSCONFIG);
 	l &= ~(0x3 << 3);
 	l |= (0x2 << 3);
-	SMS_SYSCONFIG = l;
+	sms_write_reg(l, SMS_SYSCONFIG);
 
-	l = SDRC_SYSCONFIG;
+	l = sdrc_read_reg(SDRC_SYSCONFIG);
 	l &= ~(0x3 << 3);
 	l |= (0x2 << 3);
-	SDRC_SYSCONFIG = l;
-
+	sdrc_write_reg(l, SDRC_SYSCONFIG);
 }
diff --git a/arch/arm/mach-omap2/memory.h b/arch/arm/mach-omap2/memory.h
index d212eea..9a280b5 100644
--- a/arch/arm/mach-omap2/memory.h
+++ b/arch/arm/mach-omap2/memory.h
@@ -32,3 +32,5 @@
 extern u32 omap2_memory_get_slow_dll_ctrl(void);
 extern u32 omap2_memory_get_fast_dll_ctrl(void);
 extern u32 omap2_memory_get_type(void);
+u32 omap2_dll_force_needed(void);
+u32 omap2_reprogram_sdrc(u32 level, u32 force);
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 0575097..9307700 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -1,11 +1,12 @@
 /*
  * linux/arch/arm/mach-omap2/mux.c
  *
- * OMAP1 pin multiplexing configurations
+ * OMAP2 pin multiplexing configurations
  *
- * Copyright (C) 2003 - 2005 Nokia Corporation
+ * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2003 - 2008 Nokia Corporation
  *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ * Written by Tony Lindgren
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -28,13 +29,17 @@
 #include <asm/io.h>
 #include <linux/spinlock.h>
 
+#include <asm/arch/control.h>
 #include <asm/arch/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
+static struct omap_mux_cfg arch_mux_cfg;
+
 /* NOTE: See mux.h for the enumeration */
 
-struct pin_config __initdata_or_module omap24xx_pins[] = {
+#ifdef CONFIG_ARCH_OMAP24XX
+static struct pin_config __initdata_or_module omap24xx_pins[] = {
 /*
  *	description			mux	mux	pull	pull	debug
  *					offset	mode	ena	type
@@ -77,7 +82,12 @@
 MUX_CFG_24XX("AA8_242X_GPIO58",		0x0ea,	3,	0,	0,	1)
 MUX_CFG_24XX("Y20_24XX_GPIO60",		0x12c,	3,	0,	0,	1)
 MUX_CFG_24XX("W4__24XX_GPIO74",		0x0f2,	3,	0,	0,	1)
+MUX_CFG_24XX("N15_24XX_GPIO85",		0x103,	3,	0,	0,	1)
 MUX_CFG_24XX("M15_24XX_GPIO92",		0x10a,	3,	0,	0,	1)
+MUX_CFG_24XX("P20_24XX_GPIO93",		0x10b,	3,	0,	0,	1)
+MUX_CFG_24XX("P18_24XX_GPIO95",		0x10d,	3,	0,	0,	1)
+MUX_CFG_24XX("M18_24XX_GPIO96",		0x10e,	3,	0,	0,	1)
+MUX_CFG_24XX("L14_24XX_GPIO97",		0x10f,	3,	0,	0,	1)
 MUX_CFG_24XX("J15_24XX_GPIO99",		0x113,	3,	1,	1,	1)
 MUX_CFG_24XX("V14_24XX_GPIO117",	0x128,	3,	1,	0,	1)
 MUX_CFG_24XX("P14_24XX_GPIO125",	0x140,	3,	1,	1,	1)
@@ -102,9 +112,6 @@
 MUX_CFG_24XX("D3_242X_DMAREQ4",		0x072,	2,	0,	0,	1)
 MUX_CFG_24XX("E3_242X_DMAREQ5",		0x071,	2,	0,	0,	1)
 
-/* TSC IRQ */
-MUX_CFG_24XX("P20_24XX_TSC_IRQ",	0x108,	0,	0,	0,	1)
-
 /* UART3 */
 MUX_CFG_24XX("K15_24XX_UART3_TX",	0x118,	0,	0,	0,	1)
 MUX_CFG_24XX("K14_24XX_UART3_RX",	0x119,	0,	0,	0,	1)
@@ -167,12 +174,108 @@
 MUX_CFG_24XX("AA4_24XX_KBC2",		0xe7,	3,	0,	0,	1)
 MUX_CFG_24XX("B13_24XX_KBC6",		0x110,	3,	0,	0,	1)
 
+/* 2430 USB */
+MUX_CFG_24XX("AD9_2430_USB0_PUEN",	0x133,	4,	0,	0,	1)
+MUX_CFG_24XX("Y11_2430_USB0_VP",	0x134,	4,	0,	0,	1)
+MUX_CFG_24XX("AD7_2430_USB0_VM",	0x135,	4,	0,	0,	1)
+MUX_CFG_24XX("AE7_2430_USB0_RCV",	0x136,	4,	0,	0,	1)
+MUX_CFG_24XX("AD4_2430_USB0_TXEN",	0x137,	4,	0,	0,	1)
+MUX_CFG_24XX("AF9_2430_USB0_SE0",	0x138,	4,	0,	0,	1)
+MUX_CFG_24XX("AE6_2430_USB0_DAT",	0x139,	4,	0,	0,	1)
+MUX_CFG_24XX("AD24_2430_USB1_SE0",	0x107,	2,	0,	0,	1)
+MUX_CFG_24XX("AB24_2430_USB1_RCV",	0x108,	2,	0,	0,	1)
+MUX_CFG_24XX("Y25_2430_USB1_TXEN",	0x109,	2,	0,	0,	1)
+MUX_CFG_24XX("AA26_2430_USB1_DAT",	0x10A,	2,	0,	0,	1)
+
+/* 2430 HS-USB */
+MUX_CFG_24XX("AD9_2430_USB0HS_DATA3",	0x133,	0,	0,	0,	1)
+MUX_CFG_24XX("Y11_2430_USB0HS_DATA4",	0x134,	0,	0,	0,	1)
+MUX_CFG_24XX("AD7_2430_USB0HS_DATA5",	0x135,	0,	0,	0,	1)
+MUX_CFG_24XX("AE7_2430_USB0HS_DATA6",	0x136,	0,	0,	0,	1)
+MUX_CFG_24XX("AD4_2430_USB0HS_DATA2",	0x137,	0,	0,	0,	1)
+MUX_CFG_24XX("AF9_2430_USB0HS_DATA0",	0x138,	0,	0,	0,	1)
+MUX_CFG_24XX("AE6_2430_USB0HS_DATA1",	0x139,	0,	0,	0,	1)
+MUX_CFG_24XX("AE8_2430_USB0HS_CLK",	0x13A,	0,	0,	0,	1)
+MUX_CFG_24XX("AD8_2430_USB0HS_DIR",	0x13B,	0,	0,	0,	1)
+MUX_CFG_24XX("AE5_2430_USB0HS_STP",	0x13c,	0,	1,	1,	1)
+MUX_CFG_24XX("AE9_2430_USB0HS_NXT",	0x13D,	0,	0,	0,	1)
+MUX_CFG_24XX("AC7_2430_USB0HS_DATA7",	0x13E,	0,	0,	0,	1)
+
+/* 2430 McBSP */
+MUX_CFG_24XX("AC10_2430_MCBSP2_FSX",	0x012E,	1,	0,	0,	1)
+MUX_CFG_24XX("AD16_2430_MCBSP2_CLX",	0x012F,	1,	0,	0,	1)
+MUX_CFG_24XX("AE13_2430_MCBSP2_DX",	0x0130,	1,	0,	0,	1)
+MUX_CFG_24XX("AD13_2430_MCBSP2_DR",	0x0131,	1,	0,	0,	1)
+MUX_CFG_24XX("AC10_2430_MCBSP2_FSX_OFF",0x012E,	0,	0,	0,	1)
+MUX_CFG_24XX("AD16_2430_MCBSP2_CLX_OFF",0x012F,	0,	0,	0,	1)
+MUX_CFG_24XX("AE13_2430_MCBSP2_DX_OFF",	0x0130,	0,	0,	0,	1)
+MUX_CFG_24XX("AD13_2430_MCBSP2_DR_OFF",	0x0131,	0,	0,	0,	1)
 };
 
+#define OMAP24XX_PINS_SZ	ARRAY_SIZE(omap24xx_pins)
+
+#else
+#define omap24xx_pins		NULL
+#define OMAP24XX_PINS_SZ	0
+#endif	/* CONFIG_ARCH_OMAP24XX */
+
+#define OMAP24XX_PULL_ENA	(1 << 3)
+#define OMAP24XX_PULL_UP	(1 << 4)
+
+#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u8 reg)
+{
+	u16 orig;
+	u8 warn = 0, debug = 0;
+
+	orig = omap_ctrl_readb(cfg->mux_reg);
+
+#ifdef	CONFIG_OMAP_MUX_DEBUG
+	debug = cfg->debug;
+#endif
+	warn = (orig != reg);
+	if (debug || warn)
+		printk(KERN_WARNING
+			"MUX: setup %s (0x%08x): 0x%02x -> 0x%02x\n",
+			cfg->name, omap_ctrl_base_get() + cfg->mux_reg,
+			orig, reg);
+}
+#else
+#define omap2_cfg_debug(x, y)	do {} while (0)
+#endif
+
+#ifdef CONFIG_ARCH_OMAP24XX
+int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
+{
+	static DEFINE_SPINLOCK(mux_spin_lock);
+	unsigned long flags;
+	u8 reg = 0;
+
+	spin_lock_irqsave(&mux_spin_lock, flags);
+	reg |= cfg->mask & 0x7;
+	if (cfg->pull_val)
+		reg |= OMAP24XX_PULL_ENA;
+	if (cfg->pu_pd_val)
+		reg |= OMAP24XX_PULL_UP;
+	omap2_cfg_debug(cfg, reg);
+	omap_ctrl_writeb(reg, cfg->mux_reg);
+	spin_unlock_irqrestore(&mux_spin_lock, flags);
+
+	return 0;
+}
+#else
+#define omap24xx_cfg_reg	0
+#endif
+
 int __init omap2_mux_init(void)
 {
-	omap_mux_register(omap24xx_pins, ARRAY_SIZE(omap24xx_pins));
-	return 0;
+	if (cpu_is_omap24xx()) {
+		arch_mux_cfg.pins	= omap24xx_pins;
+		arch_mux_cfg.size	= OMAP24XX_PINS_SZ;
+		arch_mux_cfg.cfg_reg	= omap24xx_cfg_reg;
+	}
+
+	return omap_mux_register(&arch_mux_cfg);
 }
 
 #endif
diff --git a/arch/arm/mach-omap2/pm-domain.c b/arch/arm/mach-omap2/pm-domain.c
deleted file mode 100644
index 2494091..0000000
--- a/arch/arm/mach-omap2/pm-domain.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/pm-domain.c
- *
- * Power domain functions for OMAP2
- *
- * Copyright (C) 2006 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- *
- * Some code based on earlier OMAP2 sample PM code
- * Copyright (C) 2005 Texas Instruments, Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-
-#include <asm/io.h>
-
-#include "prcm-regs.h"
-
-/* Power domain offsets */
-#define PM_MPU_OFFSET			0x100
-#define PM_CORE_OFFSET			0x200
-#define PM_GFX_OFFSET			0x300
-#define PM_WKUP_OFFSET			0x400		/* Autoidle only */
-#define PM_PLL_OFFSET			0x500		/* Autoidle only */
-#define PM_DSP_OFFSET			0x800
-#define PM_MDM_OFFSET			0xc00
-
-/* Power domain wake-up dependency control register */
-#define PM_WKDEP_OFFSET			0xc8
-#define		EN_MDM			(1 << 5)
-#define		EN_WKUP			(1 << 4)
-#define		EN_GFX			(1 << 3)
-#define		EN_DSP			(1 << 2)
-#define		EN_MPU			(1 << 1)
-#define		EN_CORE			(1 << 0)
-
-/* Core power domain state transition control register */
-#define PM_PWSTCTRL_OFFSET		0xe0
-#define		FORCESTATE		(1 << 18)	/* Only for DSP & GFX */
-#define		MEM4RETSTATE		(1 << 6)
-#define		MEM3RETSTATE		(1 << 5)
-#define		MEM2RETSTATE		(1 << 4)
-#define		MEM1RETSTATE		(1 << 3)
-#define		LOGICRETSTATE		(1 << 2)	/* Logic is retained */
-#define		POWERSTATE_OFF		0x3
-#define		POWERSTATE_RETENTION	0x1
-#define		POWERSTATE_ON		0x0
-
-/* Power domain state register */
-#define PM_PWSTST_OFFSET		0xe4
-
-/* Hardware supervised state transition control register */
-#define CM_CLKSTCTRL_OFFSET		0x48
-#define		AUTOSTAT_MPU		(1 << 0)	/* MPU */
-#define		AUTOSTAT_DSS		(1 << 2)	/* Core */
-#define		AUTOSTAT_L4		(1 << 1)	/* Core */
-#define		AUTOSTAT_L3		(1 << 0)	/* Core */
-#define		AUTOSTAT_GFX		(1 << 0)	/* GFX */
-#define		AUTOSTAT_IVA		(1 << 8)	/* 2420 IVA in DSP domain */
-#define		AUTOSTAT_DSP		(1 << 0)	/* DSP */
-#define		AUTOSTAT_MDM		(1 << 0)	/* MDM */
-
-/* Automatic control of interface clock idling */
-#define CM_AUTOIDLE1_OFFSET		0x30
-#define CM_AUTOIDLE2_OFFSET		0x34		/* Core only */
-#define CM_AUTOIDLE3_OFFSET		0x38		/* Core only */
-#define CM_AUTOIDLE4_OFFSET		0x3c		/* Core only */
-#define		AUTO_54M(x)		(((x) & 0x3) << 6)
-#define		AUTO_96M(x)		(((x) & 0x3) << 2)
-#define		AUTO_DPLL(x)		(((x) & 0x3) << 0)
-#define		AUTO_STOPPED		0x3
-#define		AUTO_BYPASS_FAST	0x2		/* DPLL only */
-#define		AUTO_BYPASS_LOW_POWER	0x1		/* DPLL only */
-#define		AUTO_DISABLED		0x0
-
-/* Voltage control PRCM_VOLTCTRL bits */
-#define		AUTO_EXTVOLT		(1 << 15)
-#define		FORCE_EXTVOLT		(1 << 14)
-#define		SETOFF_LEVEL(x)		(((x) & 0x3) << 12)
-#define		MEMRETCTRL		(1 << 8)
-#define		SETRET_LEVEL(x)		(((x) & 0x3) << 6)
-#define		VOLT_LEVEL(x)		(((x) & 0x3) << 0)
-
-#define OMAP24XX_PRCM_VBASE	IO_ADDRESS(OMAP24XX_PRCM_BASE)
-#define prcm_readl(r)		__raw_readl(OMAP24XX_PRCM_VBASE + (r))
-#define prcm_writel(v, r)	__raw_writel((v), OMAP24XX_PRCM_VBASE + (r))
-
-static u32 pmdomain_get_wakeup_dependencies(int domain_offset)
-{
-	return prcm_readl(domain_offset + PM_WKDEP_OFFSET);
-}
-
-static void pmdomain_set_wakeup_dependencies(u32 state, int domain_offset)
-{
-	prcm_writel(state, domain_offset + PM_WKDEP_OFFSET);
-}
-
-static u32 pmdomain_get_powerstate(int domain_offset)
-{
-	return prcm_readl(domain_offset + PM_PWSTCTRL_OFFSET);
-}
-
-static void pmdomain_set_powerstate(u32 state, int domain_offset)
-{
-	prcm_writel(state, domain_offset + PM_PWSTCTRL_OFFSET);
-}
-
-static u32 pmdomain_get_clock_autocontrol(int domain_offset)
-{
-	return prcm_readl(domain_offset + CM_CLKSTCTRL_OFFSET);
-}
-
-static void pmdomain_set_clock_autocontrol(u32 state, int domain_offset)
-{
-	prcm_writel(state, domain_offset + CM_CLKSTCTRL_OFFSET);
-}
-
-static u32 pmdomain_get_clock_autoidle1(int domain_offset)
-{
-	return prcm_readl(domain_offset + CM_AUTOIDLE1_OFFSET);
-}
-
-/* Core domain only */
-static u32 pmdomain_get_clock_autoidle2(int domain_offset)
-{
-	return prcm_readl(domain_offset + CM_AUTOIDLE2_OFFSET);
-}
-
-/* Core domain only */
-static u32 pmdomain_get_clock_autoidle3(int domain_offset)
-{
-	return prcm_readl(domain_offset + CM_AUTOIDLE3_OFFSET);
-}
-
-/* Core domain only */
-static u32 pmdomain_get_clock_autoidle4(int domain_offset)
-{
-	return prcm_readl(domain_offset + CM_AUTOIDLE4_OFFSET);
-}
-
-static void pmdomain_set_clock_autoidle1(u32 state, int domain_offset)
-{
-	prcm_writel(state, CM_AUTOIDLE1_OFFSET + domain_offset);
-}
-
-/* Core domain only */
-static void pmdomain_set_clock_autoidle2(u32 state, int domain_offset)
-{
-	prcm_writel(state, CM_AUTOIDLE2_OFFSET + domain_offset);
-}
-
-/* Core domain only */
-static void pmdomain_set_clock_autoidle3(u32 state, int domain_offset)
-{
-	prcm_writel(state, CM_AUTOIDLE3_OFFSET + domain_offset);
-}
-
-/* Core domain only */
-static void pmdomain_set_clock_autoidle4(u32 state, int domain_offset)
-{
-	prcm_writel(state, CM_AUTOIDLE4_OFFSET + domain_offset);
-}
-
-/*
- * Configures power management domains to idle clocks automatically.
- */
-void pmdomain_set_autoidle(void)
-{
-	u32 val;
-
-	/* Set PLL auto stop for 54M, 96M & DPLL */
-	pmdomain_set_clock_autoidle1(AUTO_54M(AUTO_STOPPED) |
-				     AUTO_96M(AUTO_STOPPED) |
-				     AUTO_DPLL(AUTO_STOPPED), PM_PLL_OFFSET);
-
-	/* External clock input control
-	 * REVISIT: Should this be in clock framework?
-	 */
-	PRCM_CLKSRC_CTRL |= (0x3 << 3);
-
-	/* Configure number of 32KHz clock cycles for sys_clk */
-	PRCM_CLKSSETUP = 0x00ff;
-
-	/* Configure automatic voltage transition */
-	PRCM_VOLTSETUP = 0;
-	val = PRCM_VOLTCTRL;
-	val &= ~(SETOFF_LEVEL(0x3) | VOLT_LEVEL(0x3));
-	val |= SETOFF_LEVEL(1) | VOLT_LEVEL(1) | AUTO_EXTVOLT;
-	PRCM_VOLTCTRL = val;
-
-	/* Disable emulation tools functional clock */
-	PRCM_CLKEMUL_CTRL = 0x0;
-
-	/* Set core memory retention state */
-	val = pmdomain_get_powerstate(PM_CORE_OFFSET);
-	if (cpu_is_omap2420()) {
-		val &= ~(0x7 << 3);
-		val |= (MEM3RETSTATE | MEM2RETSTATE | MEM1RETSTATE);
-	} else {
-		val &= ~(0xf << 3);
-		val |= (MEM4RETSTATE | MEM3RETSTATE | MEM2RETSTATE |
-			MEM1RETSTATE);
-	}
-	pmdomain_set_powerstate(val, PM_CORE_OFFSET);
-
-	/* OCP interface smart idle. REVISIT: Enable autoidle bit0 ? */
-	val = SMS_SYSCONFIG;
-	val &= ~(0x3 << 3);
-	val |= (0x2 << 3) | (1 << 0);
-	SMS_SYSCONFIG |= val;
-
-	val = SDRC_SYSCONFIG;
-	val &= ~(0x3 << 3);
-	val |= (0x2 << 3);
-	SDRC_SYSCONFIG = val;
-
-	/* Configure L3 interface for smart idle.
-	 * REVISIT: Enable autoidle bit0 ?
-	 */
-	val = GPMC_SYSCONFIG;
-	val &= ~(0x3 << 3);
-	val |= (0x2 << 3) | (1 << 0);
-	GPMC_SYSCONFIG = val;
-
-	pmdomain_set_powerstate(LOGICRETSTATE | POWERSTATE_RETENTION,
-				PM_MPU_OFFSET);
-	pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_CORE_OFFSET);
-	if (!cpu_is_omap2420())
-		pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_MDM_OFFSET);
-
-	/* Assume suspend function has saved the state for DSP and GFX */
-	pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_DSP_OFFSET);
-	pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_GFX_OFFSET);
-
-#if 0
-	/* REVISIT: Internal USB needs special handling */
-	force_standby_usb();
-	if (cpu_is_omap2430())
-		force_hsmmc();
-	sdram_self_refresh_on_idle_req(1);
-#endif
-
-	/* Enable clock auto control for all domains.
-	 * Note that CORE domain includes also DSS, L4 & L3.
-	 */
-	pmdomain_set_clock_autocontrol(AUTOSTAT_MPU, PM_MPU_OFFSET);
-	pmdomain_set_clock_autocontrol(AUTOSTAT_GFX, PM_GFX_OFFSET);
-	pmdomain_set_clock_autocontrol(AUTOSTAT_DSS | AUTOSTAT_L4 | AUTOSTAT_L3,
-				       PM_CORE_OFFSET);
-	if (cpu_is_omap2420())
-		pmdomain_set_clock_autocontrol(AUTOSTAT_IVA | AUTOSTAT_DSP,
-					       PM_DSP_OFFSET);
-	else {
-		pmdomain_set_clock_autocontrol(AUTOSTAT_DSP, PM_DSP_OFFSET);
-		pmdomain_set_clock_autocontrol(AUTOSTAT_MDM, PM_MDM_OFFSET);
-	}
-
-	/* Enable clock autoidle for all domains */
-	pmdomain_set_clock_autoidle1(0x2, PM_DSP_OFFSET);
-	if (cpu_is_omap2420()) {
-		pmdomain_set_clock_autoidle1(0xfffffff9, PM_CORE_OFFSET);
-		pmdomain_set_clock_autoidle2(0x7, PM_CORE_OFFSET);
-		pmdomain_set_clock_autoidle1(0x3f, PM_WKUP_OFFSET);
-	} else {
-		pmdomain_set_clock_autoidle1(0xeafffff1, PM_CORE_OFFSET);
-		pmdomain_set_clock_autoidle2(0xfff, PM_CORE_OFFSET);
-		pmdomain_set_clock_autoidle1(0x7f, PM_WKUP_OFFSET);
-		pmdomain_set_clock_autoidle1(0x3, PM_MDM_OFFSET);
-	}
-	pmdomain_set_clock_autoidle3(0x7, PM_CORE_OFFSET);
-	pmdomain_set_clock_autoidle4(0x1f, PM_CORE_OFFSET);
-}
-
-/*
- * Initializes power domains by removing wake-up dependencies and powering
- * down DSP and GFX. Gets called from PM init. Note that DSP and IVA code
- * must re-enable DSP and GFX when used.
- */
-void __init pmdomain_init(void)
-{
-	/* Remove all domain wakeup dependencies */
-	pmdomain_set_wakeup_dependencies(EN_WKUP | EN_CORE, PM_MPU_OFFSET);
-	pmdomain_set_wakeup_dependencies(0, PM_DSP_OFFSET);
-	pmdomain_set_wakeup_dependencies(0, PM_GFX_OFFSET);
-	pmdomain_set_wakeup_dependencies(EN_WKUP | EN_MPU, PM_CORE_OFFSET);
-	if (cpu_is_omap2430())
-		pmdomain_set_wakeup_dependencies(0, PM_MDM_OFFSET);
-
-	/* Power down DSP and GFX */
-	pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_DSP_OFFSET);
-	pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_GFX_OFFSET);
-}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index baf7d82..aad781d 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -23,6 +23,7 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -36,8 +37,6 @@
 #include <asm/arch/sram.h>
 #include <asm/arch/pm.h>
 
-#include "prcm-regs.h"
-
 static struct clk *vclk;
 static void (*omap2_sram_idle)(void);
 static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
@@ -78,251 +77,8 @@
 	return 0;
 }
 
-#define INT0_WAKE_MASK	(OMAP_IRQ_BIT(INT_24XX_GPIO_BANK1) |	\
-			OMAP_IRQ_BIT(INT_24XX_GPIO_BANK2) |	\
-			OMAP_IRQ_BIT(INT_24XX_GPIO_BANK3))
-
-#define INT1_WAKE_MASK	(OMAP_IRQ_BIT(INT_24XX_GPIO_BANK4))
-
-#define INT2_WAKE_MASK	(OMAP_IRQ_BIT(INT_24XX_UART1_IRQ) |	\
-			OMAP_IRQ_BIT(INT_24XX_UART2_IRQ) |	\
-			OMAP_IRQ_BIT(INT_24XX_UART3_IRQ))
-
-#define preg(reg)	printk("%s\t(0x%p):\t0x%08x\n", #reg, &reg, reg);
-
-static void omap2_pm_debug(char * desc)
-{
-	printk("%s:\n", desc);
-
-	preg(CM_CLKSTCTRL_MPU);
-	preg(CM_CLKSTCTRL_CORE);
-	preg(CM_CLKSTCTRL_GFX);
-	preg(CM_CLKSTCTRL_DSP);
-	preg(CM_CLKSTCTRL_MDM);
-
-	preg(PM_PWSTCTRL_MPU);
-	preg(PM_PWSTCTRL_CORE);
-	preg(PM_PWSTCTRL_GFX);
-	preg(PM_PWSTCTRL_DSP);
-	preg(PM_PWSTCTRL_MDM);
-
-	preg(PM_PWSTST_MPU);
-	preg(PM_PWSTST_CORE);
-	preg(PM_PWSTST_GFX);
-	preg(PM_PWSTST_DSP);
-	preg(PM_PWSTST_MDM);
-
-	preg(CM_AUTOIDLE1_CORE);
-	preg(CM_AUTOIDLE2_CORE);
-	preg(CM_AUTOIDLE3_CORE);
-	preg(CM_AUTOIDLE4_CORE);
-	preg(CM_AUTOIDLE_WKUP);
-	preg(CM_AUTOIDLE_PLL);
-	preg(CM_AUTOIDLE_DSP);
-	preg(CM_AUTOIDLE_MDM);
-
-	preg(CM_ICLKEN1_CORE);
-	preg(CM_ICLKEN2_CORE);
-	preg(CM_ICLKEN3_CORE);
-	preg(CM_ICLKEN4_CORE);
-	preg(CM_ICLKEN_GFX);
-	preg(CM_ICLKEN_WKUP);
-	preg(CM_ICLKEN_DSP);
-	preg(CM_ICLKEN_MDM);
-
-	preg(CM_IDLEST1_CORE);
-	preg(CM_IDLEST2_CORE);
-	preg(CM_IDLEST3_CORE);
-	preg(CM_IDLEST4_CORE);
-	preg(CM_IDLEST_GFX);
-	preg(CM_IDLEST_WKUP);
-	preg(CM_IDLEST_CKGEN);
-	preg(CM_IDLEST_DSP);
-	preg(CM_IDLEST_MDM);
-
-	preg(RM_RSTST_MPU);
-	preg(RM_RSTST_GFX);
-	preg(RM_RSTST_WKUP);
-	preg(RM_RSTST_DSP);
-	preg(RM_RSTST_MDM);
-
-	preg(PM_WKDEP_MPU);
-	preg(PM_WKDEP_CORE);
-	preg(PM_WKDEP_GFX);
-	preg(PM_WKDEP_DSP);
-	preg(PM_WKDEP_MDM);
-
-	preg(CM_FCLKEN_WKUP);
-	preg(CM_ICLKEN_WKUP);
-	preg(CM_IDLEST_WKUP);
-	preg(CM_AUTOIDLE_WKUP);
-	preg(CM_CLKSEL_WKUP);
-
-	preg(PM_WKEN_WKUP);
-	preg(PM_WKST_WKUP);
-}
-
-static inline void omap2_pm_save_registers(void)
-{
-	/* Save interrupt registers */
-	OMAP24XX_SAVE(INTC_MIR0);
-	OMAP24XX_SAVE(INTC_MIR1);
-	OMAP24XX_SAVE(INTC_MIR2);
-
-	/* Save power control registers */
-	OMAP24XX_SAVE(CM_CLKSTCTRL_MPU);
-	OMAP24XX_SAVE(CM_CLKSTCTRL_CORE);
-	OMAP24XX_SAVE(CM_CLKSTCTRL_GFX);
-	OMAP24XX_SAVE(CM_CLKSTCTRL_DSP);
-	OMAP24XX_SAVE(CM_CLKSTCTRL_MDM);
-
-	/* Save power state registers */
-	OMAP24XX_SAVE(PM_PWSTCTRL_MPU);
-	OMAP24XX_SAVE(PM_PWSTCTRL_CORE);
-	OMAP24XX_SAVE(PM_PWSTCTRL_GFX);
-	OMAP24XX_SAVE(PM_PWSTCTRL_DSP);
-	OMAP24XX_SAVE(PM_PWSTCTRL_MDM);
-
-	/* Save autoidle registers */
-	OMAP24XX_SAVE(CM_AUTOIDLE1_CORE);
-	OMAP24XX_SAVE(CM_AUTOIDLE2_CORE);
-	OMAP24XX_SAVE(CM_AUTOIDLE3_CORE);
-	OMAP24XX_SAVE(CM_AUTOIDLE4_CORE);
-	OMAP24XX_SAVE(CM_AUTOIDLE_WKUP);
-	OMAP24XX_SAVE(CM_AUTOIDLE_PLL);
-	OMAP24XX_SAVE(CM_AUTOIDLE_DSP);
-	OMAP24XX_SAVE(CM_AUTOIDLE_MDM);
-
-	/* Save idle state registers */
-	OMAP24XX_SAVE(CM_IDLEST1_CORE);
-	OMAP24XX_SAVE(CM_IDLEST2_CORE);
-	OMAP24XX_SAVE(CM_IDLEST3_CORE);
-	OMAP24XX_SAVE(CM_IDLEST4_CORE);
-	OMAP24XX_SAVE(CM_IDLEST_GFX);
-	OMAP24XX_SAVE(CM_IDLEST_WKUP);
-	OMAP24XX_SAVE(CM_IDLEST_CKGEN);
-	OMAP24XX_SAVE(CM_IDLEST_DSP);
-	OMAP24XX_SAVE(CM_IDLEST_MDM);
-
-	/* Save clock registers */
-	OMAP24XX_SAVE(CM_FCLKEN1_CORE);
-	OMAP24XX_SAVE(CM_FCLKEN2_CORE);
-	OMAP24XX_SAVE(CM_ICLKEN1_CORE);
-	OMAP24XX_SAVE(CM_ICLKEN2_CORE);
-	OMAP24XX_SAVE(CM_ICLKEN3_CORE);
-	OMAP24XX_SAVE(CM_ICLKEN4_CORE);
-}
-
-static inline void omap2_pm_restore_registers(void)
-{
-	/* Restore clock state registers */
-	OMAP24XX_RESTORE(CM_CLKSTCTRL_MPU);
-	OMAP24XX_RESTORE(CM_CLKSTCTRL_CORE);
-	OMAP24XX_RESTORE(CM_CLKSTCTRL_GFX);
-	OMAP24XX_RESTORE(CM_CLKSTCTRL_DSP);
-	OMAP24XX_RESTORE(CM_CLKSTCTRL_MDM);
-
-	/* Restore power state registers */
-	OMAP24XX_RESTORE(PM_PWSTCTRL_MPU);
-	OMAP24XX_RESTORE(PM_PWSTCTRL_CORE);
-	OMAP24XX_RESTORE(PM_PWSTCTRL_GFX);
-	OMAP24XX_RESTORE(PM_PWSTCTRL_DSP);
-	OMAP24XX_RESTORE(PM_PWSTCTRL_MDM);
-
-	/* Restore idle state registers */
-	OMAP24XX_RESTORE(CM_IDLEST1_CORE);
-	OMAP24XX_RESTORE(CM_IDLEST2_CORE);
-	OMAP24XX_RESTORE(CM_IDLEST3_CORE);
-	OMAP24XX_RESTORE(CM_IDLEST4_CORE);
-	OMAP24XX_RESTORE(CM_IDLEST_GFX);
-	OMAP24XX_RESTORE(CM_IDLEST_WKUP);
-	OMAP24XX_RESTORE(CM_IDLEST_CKGEN);
-	OMAP24XX_RESTORE(CM_IDLEST_DSP);
-	OMAP24XX_RESTORE(CM_IDLEST_MDM);
-
-	/* Restore autoidle registers */
-	OMAP24XX_RESTORE(CM_AUTOIDLE1_CORE);
-	OMAP24XX_RESTORE(CM_AUTOIDLE2_CORE);
-	OMAP24XX_RESTORE(CM_AUTOIDLE3_CORE);
-	OMAP24XX_RESTORE(CM_AUTOIDLE4_CORE);
-	OMAP24XX_RESTORE(CM_AUTOIDLE_WKUP);
-	OMAP24XX_RESTORE(CM_AUTOIDLE_PLL);
-	OMAP24XX_RESTORE(CM_AUTOIDLE_DSP);
-	OMAP24XX_RESTORE(CM_AUTOIDLE_MDM);
-
-	/* Restore clock registers */
-	OMAP24XX_RESTORE(CM_FCLKEN1_CORE);
-	OMAP24XX_RESTORE(CM_FCLKEN2_CORE);
-	OMAP24XX_RESTORE(CM_ICLKEN1_CORE);
-	OMAP24XX_RESTORE(CM_ICLKEN2_CORE);
-	OMAP24XX_RESTORE(CM_ICLKEN3_CORE);
-	OMAP24XX_RESTORE(CM_ICLKEN4_CORE);
-
-	/* REVISIT: Clear interrupts here */
-
-	/* Restore interrupt registers */
-	OMAP24XX_RESTORE(INTC_MIR0);
-	OMAP24XX_RESTORE(INTC_MIR1);
-	OMAP24XX_RESTORE(INTC_MIR2);
-}
-
 static int omap2_pm_suspend(void)
 {
-	int processor_type = 0;
-
-	/* REVISIT: 0x21 or 0x26? */
-	if (cpu_is_omap2420())
-		processor_type = 0x21;
-
-	if (!processor_type)
-		return -ENOTSUPP;
-
-	local_irq_disable();
-	local_fiq_disable();
-
-	omap2_pm_save_registers();
-
-	/* Disable interrupts except for the wake events */
-	INTC_MIR_SET0 = 0xffffffff & ~INT0_WAKE_MASK;
-	INTC_MIR_SET1 = 0xffffffff & ~INT1_WAKE_MASK;
-	INTC_MIR_SET2 = 0xffffffff & ~INT2_WAKE_MASK;
-
-	pmdomain_set_autoidle();
-
-	/* Clear old wake-up events */
-	PM_WKST1_CORE = 0;
-	PM_WKST2_CORE = 0;
-	PM_WKST_WKUP = 0;
-
-	/* Enable wake-up events */
-	PM_WKEN1_CORE = (1 << 22) | (1 << 21);	/* UART1 & 2 */
-	PM_WKEN2_CORE = (1 << 2);		/* UART3 */
-	PM_WKEN_WKUP = (1 << 2) | (1 << 0);	/* GPIO & GPT1 */
-
-	/* Disable clocks except for CM_ICLKEN2_CORE. It gets disabled
-	 * in the SRAM suspend code */
-	CM_FCLKEN1_CORE = 0;
-	CM_FCLKEN2_CORE = 0;
-	CM_ICLKEN1_CORE = 0;
-	CM_ICLKEN3_CORE = 0;
-	CM_ICLKEN4_CORE = 0;
-
-	omap2_pm_debug("Status before suspend");
-
-	/* Must wait for serial buffers to clear */
-	mdelay(200);
-
-	/* Jump to SRAM suspend code
-	 * REVISIT: When is this SDRC_DLLB_CTRL?
-	 */
-	omap2_sram_suspend(SDRC_DLLA_CTRL, processor_type);
-
-	/* Back from sleep */
-	omap2_pm_restore_registers();
-
-	local_fiq_enable();
-	local_irq_enable();
-
 	return 0;
 }
 
@@ -357,30 +113,6 @@
 
 int __init omap2_pm_init(void)
 {
-	printk("Power Management for TI OMAP.\n");
-
-	vclk = clk_get(NULL, "virt_prcm_set");
-	if (IS_ERR(vclk)) {
-		printk(KERN_ERR "Could not get PM vclk\n");
-		return -ENODEV;
-	}
-
-	/*
-	 * We copy the assembler sleep/wakeup routines to SRAM.
-	 * These routines need to be in SRAM as that's the only
-	 * memory the MPU can see when it wakes up.
-	 */
-	omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
-					 omap24xx_idle_loop_suspend_sz);
-
-	omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
-					    omap24xx_cpu_suspend_sz);
-
-	suspend_set_ops(&omap_pm_ops);
-	pm_idle = omap2_pm_idle;
-
-	pmdomain_init();
-
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
new file mode 100644
index 0000000..cacb340
--- /dev/null
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -0,0 +1,317 @@
+#ifndef __ARCH_ASM_MACH_OMAP2_PRCM_COMMON_H
+#define __ARCH_ASM_MACH_OMAP2_PRCM_COMMON_H
+
+/*
+ * OMAP2/3 PRCM base and module definitions
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+/* Module offsets from both CM_BASE & PRM_BASE */
+
+/*
+ * Offsets that are the same on 24xx and 34xx
+ *
+ * Technically, in terms of the TRM, OCP_MOD is 34xx only; PLL_MOD is
+ * CCR_MOD on 3430; and GFX_MOD only exists < 3430ES2.
+ */
+#define OCP_MOD						0x000
+#define MPU_MOD						0x100
+#define CORE_MOD					0x200
+#define GFX_MOD						0x300
+#define WKUP_MOD					0x400
+#define PLL_MOD						0x500
+
+
+/* Chip-specific module offsets */
+#define OMAP24XX_DSP_MOD				0x800
+
+#define OMAP2430_MDM_MOD				0xc00
+
+/* IVA2 module is < base on 3430 */
+#define OMAP3430_IVA2_MOD				-0x800
+#define OMAP3430ES2_SGX_MOD				GFX_MOD
+#define OMAP3430_CCR_MOD				PLL_MOD
+#define OMAP3430_DSS_MOD				0x600
+#define OMAP3430_CAM_MOD				0x700
+#define OMAP3430_PER_MOD				0x800
+#define OMAP3430_EMU_MOD				0x900
+#define OMAP3430_GR_MOD					0xa00
+#define OMAP3430_NEON_MOD				0xb00
+#define OMAP3430ES2_USBHOST_MOD				0xc00
+
+
+/* 24XX register bits shared between CM & PRM registers */
+
+/* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
+#define OMAP2420_EN_MMC_SHIFT				26
+#define OMAP2420_EN_MMC					(1 << 26)
+#define OMAP24XX_EN_UART2_SHIFT				22
+#define OMAP24XX_EN_UART2				(1 << 22)
+#define OMAP24XX_EN_UART1_SHIFT				21
+#define OMAP24XX_EN_UART1				(1 << 21)
+#define OMAP24XX_EN_MCSPI2_SHIFT			18
+#define OMAP24XX_EN_MCSPI2				(1 << 18)
+#define OMAP24XX_EN_MCSPI1_SHIFT			17
+#define OMAP24XX_EN_MCSPI1				(1 << 17)
+#define OMAP24XX_EN_MCBSP2_SHIFT			16
+#define OMAP24XX_EN_MCBSP2				(1 << 16)
+#define OMAP24XX_EN_MCBSP1_SHIFT			15
+#define OMAP24XX_EN_MCBSP1				(1 << 15)
+#define OMAP24XX_EN_GPT12_SHIFT				14
+#define OMAP24XX_EN_GPT12				(1 << 14)
+#define OMAP24XX_EN_GPT11_SHIFT				13
+#define OMAP24XX_EN_GPT11				(1 << 13)
+#define OMAP24XX_EN_GPT10_SHIFT				12
+#define OMAP24XX_EN_GPT10				(1 << 12)
+#define OMAP24XX_EN_GPT9_SHIFT				11
+#define OMAP24XX_EN_GPT9				(1 << 11)
+#define OMAP24XX_EN_GPT8_SHIFT				10
+#define OMAP24XX_EN_GPT8				(1 << 10)
+#define OMAP24XX_EN_GPT7_SHIFT				9
+#define OMAP24XX_EN_GPT7				(1 << 9)
+#define OMAP24XX_EN_GPT6_SHIFT				8
+#define OMAP24XX_EN_GPT6				(1 << 8)
+#define OMAP24XX_EN_GPT5_SHIFT				7
+#define OMAP24XX_EN_GPT5				(1 << 7)
+#define OMAP24XX_EN_GPT4_SHIFT				6
+#define OMAP24XX_EN_GPT4				(1 << 6)
+#define OMAP24XX_EN_GPT3_SHIFT				5
+#define OMAP24XX_EN_GPT3				(1 << 5)
+#define OMAP24XX_EN_GPT2_SHIFT				4
+#define OMAP24XX_EN_GPT2				(1 << 4)
+#define OMAP2420_EN_VLYNQ_SHIFT				3
+#define OMAP2420_EN_VLYNQ				(1 << 3)
+
+/* CM_FCLKEN2_CORE, CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */
+#define OMAP2430_EN_GPIO5_SHIFT				10
+#define OMAP2430_EN_GPIO5				(1 << 10)
+#define OMAP2430_EN_MCSPI3_SHIFT			9
+#define OMAP2430_EN_MCSPI3				(1 << 9)
+#define OMAP2430_EN_MMCHS2_SHIFT			8
+#define OMAP2430_EN_MMCHS2				(1 << 8)
+#define OMAP2430_EN_MMCHS1_SHIFT			7
+#define OMAP2430_EN_MMCHS1				(1 << 7)
+#define OMAP24XX_EN_UART3_SHIFT				2
+#define OMAP24XX_EN_UART3				(1 << 2)
+#define OMAP24XX_EN_USB_SHIFT				0
+#define OMAP24XX_EN_USB					(1 << 0)
+
+/* CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */
+#define OMAP2430_EN_MDM_INTC_SHIFT			11
+#define OMAP2430_EN_MDM_INTC				(1 << 11)
+#define OMAP2430_EN_USBHS_SHIFT				6
+#define OMAP2430_EN_USBHS				(1 << 6)
+
+/* CM_IDLEST1_CORE, PM_WKST1_CORE shared bits */
+#define OMAP2420_ST_MMC					(1 << 26)
+#define OMAP24XX_ST_UART2				(1 << 22)
+#define OMAP24XX_ST_UART1				(1 << 21)
+#define OMAP24XX_ST_MCSPI2				(1 << 18)
+#define OMAP24XX_ST_MCSPI1				(1 << 17)
+#define OMAP24XX_ST_GPT12				(1 << 14)
+#define OMAP24XX_ST_GPT11				(1 << 13)
+#define OMAP24XX_ST_GPT10				(1 << 12)
+#define OMAP24XX_ST_GPT9				(1 << 11)
+#define OMAP24XX_ST_GPT8				(1 << 10)
+#define OMAP24XX_ST_GPT7				(1 << 9)
+#define OMAP24XX_ST_GPT6				(1 << 8)
+#define OMAP24XX_ST_GPT5				(1 << 7)
+#define OMAP24XX_ST_GPT4				(1 << 6)
+#define OMAP24XX_ST_GPT3				(1 << 5)
+#define OMAP24XX_ST_GPT2				(1 << 4)
+#define OMAP2420_ST_VLYNQ				(1 << 3)
+
+/* CM_IDLEST2_CORE, PM_WKST2_CORE shared bits */
+#define OMAP2430_ST_MDM_INTC				(1 << 11)
+#define OMAP2430_ST_GPIO5				(1 << 10)
+#define OMAP2430_ST_MCSPI3				(1 << 9)
+#define OMAP2430_ST_MMCHS2				(1 << 8)
+#define OMAP2430_ST_MMCHS1				(1 << 7)
+#define OMAP2430_ST_USBHS				(1 << 6)
+#define OMAP24XX_ST_UART3				(1 << 2)
+#define OMAP24XX_ST_USB					(1 << 0)
+
+/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
+#define OMAP24XX_EN_GPIOS_SHIFT				2
+#define OMAP24XX_EN_GPIOS				(1 << 2)
+#define OMAP24XX_EN_GPT1_SHIFT				0
+#define OMAP24XX_EN_GPT1				(1 << 0)
+
+/* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
+#define OMAP24XX_ST_GPIOS				(1 << 2)
+#define OMAP24XX_ST_GPT1				(1 << 0)
+
+/* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
+#define OMAP2430_ST_MDM					(1 << 0)
+
+
+/* 3430 register bits shared between CM & PRM registers */
+
+/* CM_REVISION, PRM_REVISION shared bits */
+#define OMAP3430_REV_SHIFT				0
+#define OMAP3430_REV_MASK				(0xff << 0)
+
+/* CM_SYSCONFIG, PRM_SYSCONFIG shared bits */
+#define OMAP3430_AUTOIDLE				(1 << 0)
+
+/* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
+#define OMAP3430_EN_MMC2				(1 << 25)
+#define OMAP3430_EN_MMC2_SHIFT				25
+#define OMAP3430_EN_MMC1				(1 << 24)
+#define OMAP3430_EN_MMC1_SHIFT				24
+#define OMAP3430_EN_MCSPI4				(1 << 21)
+#define OMAP3430_EN_MCSPI4_SHIFT			21
+#define OMAP3430_EN_MCSPI3				(1 << 20)
+#define OMAP3430_EN_MCSPI3_SHIFT			20
+#define OMAP3430_EN_MCSPI2				(1 << 19)
+#define OMAP3430_EN_MCSPI2_SHIFT			19
+#define OMAP3430_EN_MCSPI1				(1 << 18)
+#define OMAP3430_EN_MCSPI1_SHIFT			18
+#define OMAP3430_EN_I2C3				(1 << 17)
+#define OMAP3430_EN_I2C3_SHIFT				17
+#define OMAP3430_EN_I2C2				(1 << 16)
+#define OMAP3430_EN_I2C2_SHIFT				16
+#define OMAP3430_EN_I2C1				(1 << 15)
+#define OMAP3430_EN_I2C1_SHIFT				15
+#define OMAP3430_EN_UART2				(1 << 14)
+#define OMAP3430_EN_UART2_SHIFT				14
+#define OMAP3430_EN_UART1				(1 << 13)
+#define OMAP3430_EN_UART1_SHIFT				13
+#define OMAP3430_EN_GPT11				(1 << 12)
+#define OMAP3430_EN_GPT11_SHIFT				12
+#define OMAP3430_EN_GPT10				(1 << 11)
+#define OMAP3430_EN_GPT10_SHIFT				11
+#define OMAP3430_EN_MCBSP5				(1 << 10)
+#define OMAP3430_EN_MCBSP5_SHIFT			10
+#define OMAP3430_EN_MCBSP1				(1 << 9)
+#define OMAP3430_EN_MCBSP1_SHIFT			9
+#define OMAP3430_EN_FSHOSTUSB				(1 << 5)
+#define OMAP3430_EN_FSHOSTUSB_SHIFT			5
+#define OMAP3430_EN_D2D					(1 << 3)
+#define OMAP3430_EN_D2D_SHIFT				3
+
+/* CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
+#define OMAP3430_EN_HSOTGUSB				(1 << 4)
+#define OMAP3430_EN_HSOTGUSB_SHIFT				4
+
+/* PM_WKST1_CORE, CM_IDLEST1_CORE shared bits */
+#define OMAP3430_ST_MMC2				(1 << 25)
+#define OMAP3430_ST_MMC1				(1 << 24)
+#define OMAP3430_ST_MCSPI4				(1 << 21)
+#define OMAP3430_ST_MCSPI3				(1 << 20)
+#define OMAP3430_ST_MCSPI2				(1 << 19)
+#define OMAP3430_ST_MCSPI1				(1 << 18)
+#define OMAP3430_ST_I2C3				(1 << 17)
+#define OMAP3430_ST_I2C2				(1 << 16)
+#define OMAP3430_ST_I2C1				(1 << 15)
+#define OMAP3430_ST_UART2				(1 << 14)
+#define OMAP3430_ST_UART1				(1 << 13)
+#define OMAP3430_ST_GPT11				(1 << 12)
+#define OMAP3430_ST_GPT10				(1 << 11)
+#define OMAP3430_ST_MCBSP5				(1 << 10)
+#define OMAP3430_ST_MCBSP1				(1 << 9)
+#define OMAP3430_ST_FSHOSTUSB				(1 << 5)
+#define OMAP3430_ST_HSOTGUSB				(1 << 4)
+#define OMAP3430_ST_D2D					(1 << 3)
+
+/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
+#define OMAP3430_EN_GPIO1				(1 << 3)
+#define OMAP3430_EN_GPIO1_SHIFT				3
+#define OMAP3430_EN_GPT1				(1 << 0)
+#define OMAP3430_EN_GPT1_SHIFT				0
+
+/* CM_FCLKEN_WKUP, PM_WKEN_WKUP shared bits */
+#define OMAP3430_EN_SR2					(1 << 7)
+#define OMAP3430_EN_SR2_SHIFT				7
+#define OMAP3430_EN_SR1					(1 << 6)
+#define OMAP3430_EN_SR1_SHIFT				6
+
+/* CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
+#define OMAP3430_EN_GPT12				(1 << 1)
+#define OMAP3430_EN_GPT12_SHIFT				1
+
+/* CM_IDLEST_WKUP, PM_WKST_WKUP shared bits */
+#define OMAP3430_ST_SR2					(1 << 7)
+#define OMAP3430_ST_SR1					(1 << 6)
+#define OMAP3430_ST_GPIO1				(1 << 3)
+#define OMAP3430_ST_GPT12				(1 << 1)
+#define OMAP3430_ST_GPT1				(1 << 0)
+
+/*
+ * CM_SLEEPDEP_GFX, CM_SLEEPDEP_DSS, CM_SLEEPDEP_CAM,
+ * CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_GFX,
+ * PM_WKDEP_DSS, PM_WKDEP_CAM, PM_WKDEP_PER, PM_WKDEP_NEON shared bits
+ */
+#define OMAP3430_EN_MPU					(1 << 1)
+#define OMAP3430_EN_MPU_SHIFT				1
+
+/* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER shared bits */
+#define OMAP3430_EN_GPIO6				(1 << 17)
+#define OMAP3430_EN_GPIO6_SHIFT				17
+#define OMAP3430_EN_GPIO5				(1 << 16)
+#define OMAP3430_EN_GPIO5_SHIFT				16
+#define OMAP3430_EN_GPIO4				(1 << 15)
+#define OMAP3430_EN_GPIO4_SHIFT				15
+#define OMAP3430_EN_GPIO3				(1 << 14)
+#define OMAP3430_EN_GPIO3_SHIFT				14
+#define OMAP3430_EN_GPIO2				(1 << 13)
+#define OMAP3430_EN_GPIO2_SHIFT				13
+#define OMAP3430_EN_UART3				(1 << 11)
+#define OMAP3430_EN_UART3_SHIFT				11
+#define OMAP3430_EN_GPT9				(1 << 10)
+#define OMAP3430_EN_GPT9_SHIFT				10
+#define OMAP3430_EN_GPT8				(1 << 9)
+#define OMAP3430_EN_GPT8_SHIFT				9
+#define OMAP3430_EN_GPT7				(1 << 8)
+#define OMAP3430_EN_GPT7_SHIFT				8
+#define OMAP3430_EN_GPT6				(1 << 7)
+#define OMAP3430_EN_GPT6_SHIFT				7
+#define OMAP3430_EN_GPT5				(1 << 6)
+#define OMAP3430_EN_GPT5_SHIFT				6
+#define OMAP3430_EN_GPT4				(1 << 5)
+#define OMAP3430_EN_GPT4_SHIFT				5
+#define OMAP3430_EN_GPT3				(1 << 4)
+#define OMAP3430_EN_GPT3_SHIFT				4
+#define OMAP3430_EN_GPT2				(1 << 3)
+#define OMAP3430_EN_GPT2_SHIFT				3
+
+/* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER, PM_WKST_PER shared bits */
+/* XXX Possible TI documentation bug: should the PM_WKST_PER EN_* bits
+ * be ST_* bits instead? */
+#define OMAP3430_EN_MCBSP4				(1 << 2)
+#define OMAP3430_EN_MCBSP4_SHIFT			2
+#define OMAP3430_EN_MCBSP3				(1 << 1)
+#define OMAP3430_EN_MCBSP3_SHIFT			1
+#define OMAP3430_EN_MCBSP2				(1 << 0)
+#define OMAP3430_EN_MCBSP2_SHIFT			0
+
+/* CM_IDLEST_PER, PM_WKST_PER shared bits */
+#define OMAP3430_ST_GPIO6				(1 << 17)
+#define OMAP3430_ST_GPIO5				(1 << 16)
+#define OMAP3430_ST_GPIO4				(1 << 15)
+#define OMAP3430_ST_GPIO3				(1 << 14)
+#define OMAP3430_ST_GPIO2				(1 << 13)
+#define OMAP3430_ST_UART3				(1 << 11)
+#define OMAP3430_ST_GPT9				(1 << 10)
+#define OMAP3430_ST_GPT8				(1 << 9)
+#define OMAP3430_ST_GPT7				(1 << 8)
+#define OMAP3430_ST_GPT6				(1 << 7)
+#define OMAP3430_ST_GPT5				(1 << 6)
+#define OMAP3430_ST_GPT4				(1 << 5)
+#define OMAP3430_ST_GPT3				(1 << 4)
+#define OMAP3430_ST_GPT2				(1 << 3)
+
+/* CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_MPU, PM_WKDEP_PER shared bits */
+#define OMAP3430_EN_CORE				(1 << 0)
+
+#endif
+
diff --git a/arch/arm/mach-omap2/prcm-regs.h b/arch/arm/mach-omap2/prcm-regs.h
deleted file mode 100644
index 5e1c4b5..0000000
--- a/arch/arm/mach-omap2/prcm-regs.h
+++ /dev/null
@@ -1,483 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/prcm-regs.h
- *
- * OMAP24XX Power Reset and Clock Management (PRCM) registers
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_PRCM_H
-#define __ARCH_ARM_MACH_OMAP2_PRCM_H
-
-/* SET_PERFORMANCE_LEVEL PARAMETERS */
-#define PRCM_HALF_SPEED 1
-#define PRCM_FULL_SPEED 2
-
-#ifndef __ASSEMBLER__
-
-#define PRCM_REG32(offset)	__REG32(OMAP24XX_PRCM_BASE + (offset))
-
-#define PRCM_REVISION		PRCM_REG32(0x000)
-#define PRCM_SYSCONFIG		PRCM_REG32(0x010)
-#define PRCM_IRQSTATUS_MPU	PRCM_REG32(0x018)
-#define PRCM_IRQENABLE_MPU	PRCM_REG32(0x01C)
-#define PRCM_VOLTCTRL		PRCM_REG32(0x050)
-#define PRCM_VOLTST		PRCM_REG32(0x054)
-#define PRCM_CLKSRC_CTRL	PRCM_REG32(0x060)
-#define PRCM_CLKOUT_CTRL	PRCM_REG32(0x070)
-#define PRCM_CLKEMUL_CTRL	PRCM_REG32(0x078)
-#define PRCM_CLKCFG_CTRL	PRCM_REG32(0x080)
-#define PRCM_CLKCFG_STATUS	PRCM_REG32(0x084)
-#define PRCM_VOLTSETUP		PRCM_REG32(0x090)
-#define PRCM_CLKSSETUP		PRCM_REG32(0x094)
-#define PRCM_POLCTRL		PRCM_REG32(0x098)
-
-/* GENERAL PURPOSE */
-#define GENERAL_PURPOSE1	PRCM_REG32(0x0B0)
-#define GENERAL_PURPOSE2	PRCM_REG32(0x0B4)
-#define GENERAL_PURPOSE3	PRCM_REG32(0x0B8)
-#define GENERAL_PURPOSE4	PRCM_REG32(0x0BC)
-#define GENERAL_PURPOSE5	PRCM_REG32(0x0C0)
-#define GENERAL_PURPOSE6	PRCM_REG32(0x0C4)
-#define GENERAL_PURPOSE7	PRCM_REG32(0x0C8)
-#define GENERAL_PURPOSE8	PRCM_REG32(0x0CC)
-#define GENERAL_PURPOSE9	PRCM_REG32(0x0D0)
-#define GENERAL_PURPOSE10	PRCM_REG32(0x0D4)
-#define GENERAL_PURPOSE11	PRCM_REG32(0x0D8)
-#define GENERAL_PURPOSE12	PRCM_REG32(0x0DC)
-#define GENERAL_PURPOSE13	PRCM_REG32(0x0E0)
-#define GENERAL_PURPOSE14	PRCM_REG32(0x0E4)
-#define GENERAL_PURPOSE15	PRCM_REG32(0x0E8)
-#define GENERAL_PURPOSE16	PRCM_REG32(0x0EC)
-#define GENERAL_PURPOSE17	PRCM_REG32(0x0F0)
-#define GENERAL_PURPOSE18	PRCM_REG32(0x0F4)
-#define GENERAL_PURPOSE19	PRCM_REG32(0x0F8)
-#define GENERAL_PURPOSE20	PRCM_REG32(0x0FC)
-
-/* MPU */
-#define CM_CLKSEL_MPU		PRCM_REG32(0x140)
-#define CM_CLKSTCTRL_MPU	PRCM_REG32(0x148)
-#define RM_RSTST_MPU		PRCM_REG32(0x158)
-#define PM_WKDEP_MPU		PRCM_REG32(0x1C8)
-#define PM_EVGENCTRL_MPU	PRCM_REG32(0x1D4)
-#define PM_EVEGENONTIM_MPU	PRCM_REG32(0x1D8)
-#define PM_EVEGENOFFTIM_MPU	PRCM_REG32(0x1DC)
-#define PM_PWSTCTRL_MPU		PRCM_REG32(0x1E0)
-#define PM_PWSTST_MPU		PRCM_REG32(0x1E4)
-
-/* CORE */
-#define CM_FCLKEN1_CORE		PRCM_REG32(0x200)
-#define CM_FCLKEN2_CORE		PRCM_REG32(0x204)
-#define CM_FCLKEN3_CORE		PRCM_REG32(0x208)
-#define CM_ICLKEN1_CORE		PRCM_REG32(0x210)
-#define CM_ICLKEN2_CORE		PRCM_REG32(0x214)
-#define CM_ICLKEN3_CORE		PRCM_REG32(0x218)
-#define CM_ICLKEN4_CORE		PRCM_REG32(0x21C)
-#define CM_IDLEST1_CORE		PRCM_REG32(0x220)
-#define CM_IDLEST2_CORE		PRCM_REG32(0x224)
-#define CM_IDLEST3_CORE		PRCM_REG32(0x228)
-#define CM_IDLEST4_CORE		PRCM_REG32(0x22C)
-#define CM_AUTOIDLE1_CORE	PRCM_REG32(0x230)
-#define CM_AUTOIDLE2_CORE	PRCM_REG32(0x234)
-#define CM_AUTOIDLE3_CORE	PRCM_REG32(0x238)
-#define CM_AUTOIDLE4_CORE	PRCM_REG32(0x23C)
-#define CM_CLKSEL1_CORE		PRCM_REG32(0x240)
-#define CM_CLKSEL2_CORE		PRCM_REG32(0x244)
-#define CM_CLKSTCTRL_CORE	PRCM_REG32(0x248)
-#define PM_WKEN1_CORE		PRCM_REG32(0x2A0)
-#define PM_WKEN2_CORE		PRCM_REG32(0x2A4)
-#define PM_WKST1_CORE		PRCM_REG32(0x2B0)
-#define PM_WKST2_CORE		PRCM_REG32(0x2B4)
-#define PM_WKDEP_CORE		PRCM_REG32(0x2C8)
-#define PM_PWSTCTRL_CORE	PRCM_REG32(0x2E0)
-#define PM_PWSTST_CORE		PRCM_REG32(0x2E4)
-
-/* GFX */
-#define CM_FCLKEN_GFX		PRCM_REG32(0x300)
-#define CM_ICLKEN_GFX		PRCM_REG32(0x310)
-#define CM_IDLEST_GFX		PRCM_REG32(0x320)
-#define CM_CLKSEL_GFX		PRCM_REG32(0x340)
-#define CM_CLKSTCTRL_GFX	PRCM_REG32(0x348)
-#define RM_RSTCTRL_GFX		PRCM_REG32(0x350)
-#define RM_RSTST_GFX		PRCM_REG32(0x358)
-#define PM_WKDEP_GFX		PRCM_REG32(0x3C8)
-#define PM_PWSTCTRL_GFX		PRCM_REG32(0x3E0)
-#define PM_PWSTST_GFX		PRCM_REG32(0x3E4)
-
-/* WAKE-UP */
-#define CM_FCLKEN_WKUP		PRCM_REG32(0x400)
-#define CM_ICLKEN_WKUP		PRCM_REG32(0x410)
-#define CM_IDLEST_WKUP		PRCM_REG32(0x420)
-#define CM_AUTOIDLE_WKUP	PRCM_REG32(0x430)
-#define CM_CLKSEL_WKUP		PRCM_REG32(0x440)
-#define RM_RSTCTRL_WKUP		PRCM_REG32(0x450)
-#define RM_RSTTIME_WKUP		PRCM_REG32(0x454)
-#define RM_RSTST_WKUP		PRCM_REG32(0x458)
-#define PM_WKEN_WKUP		PRCM_REG32(0x4A0)
-#define PM_WKST_WKUP		PRCM_REG32(0x4B0)
-
-/* CLOCKS */
-#define CM_CLKEN_PLL		PRCM_REG32(0x500)
-#define CM_IDLEST_CKGEN		PRCM_REG32(0x520)
-#define CM_AUTOIDLE_PLL		PRCM_REG32(0x530)
-#define CM_CLKSEL1_PLL		PRCM_REG32(0x540)
-#define CM_CLKSEL2_PLL		PRCM_REG32(0x544)
-
-/* DSP */
-#define CM_FCLKEN_DSP		PRCM_REG32(0x800)
-#define CM_ICLKEN_DSP		PRCM_REG32(0x810)
-#define CM_IDLEST_DSP		PRCM_REG32(0x820)
-#define CM_AUTOIDLE_DSP		PRCM_REG32(0x830)
-#define CM_CLKSEL_DSP		PRCM_REG32(0x840)
-#define CM_CLKSTCTRL_DSP	PRCM_REG32(0x848)
-#define RM_RSTCTRL_DSP		PRCM_REG32(0x850)
-#define RM_RSTST_DSP		PRCM_REG32(0x858)
-#define PM_WKEN_DSP		PRCM_REG32(0x8A0)
-#define PM_WKDEP_DSP		PRCM_REG32(0x8C8)
-#define PM_PWSTCTRL_DSP		PRCM_REG32(0x8E0)
-#define PM_PWSTST_DSP		PRCM_REG32(0x8E4)
-#define PRCM_IRQSTATUS_DSP	PRCM_REG32(0x8F0)
-#define PRCM_IRQENABLE_DSP	PRCM_REG32(0x8F4)
-
-/* IVA */
-#define PRCM_IRQSTATUS_IVA	PRCM_REG32(0x8F8)
-#define PRCM_IRQENABLE_IVA	PRCM_REG32(0x8FC)
-
-/* Modem on 2430 */
-#define CM_FCLKEN_MDM		PRCM_REG32(0xC00)
-#define CM_ICLKEN_MDM		PRCM_REG32(0xC10)
-#define CM_IDLEST_MDM		PRCM_REG32(0xC20)
-#define CM_AUTOIDLE_MDM		PRCM_REG32(0xC30)
-#define CM_CLKSEL_MDM		PRCM_REG32(0xC40)
-#define CM_CLKSTCTRL_MDM	PRCM_REG32(0xC48)
-#define RM_RSTCTRL_MDM		PRCM_REG32(0xC50)
-#define RM_RSTST_MDM		PRCM_REG32(0xC58)
-#define PM_WKEN_MDM		PRCM_REG32(0xCA0)
-#define PM_WKST_MDM		PRCM_REG32(0xCB0)
-#define PM_WKDEP_MDM		PRCM_REG32(0xCC8)
-#define PM_PWSTCTRL_MDM		PRCM_REG32(0xCE0)
-#define PM_PWSTST_MDM		PRCM_REG32(0xCE4)
-
-#define OMAP24XX_L4_IO_BASE	0x48000000
-
-#define DISP_BASE		(OMAP24XX_L4_IO_BASE + 0x50000)
-#define DISP_REG32(offset)	__REG32(DISP_BASE + (offset))
-
-#define OMAP24XX_GPMC_BASE	(L3_24XX_BASE + 0xa000)
-#define GPMC_REG32(offset)	__REG32(OMAP24XX_GPMC_BASE + (offset))
-
-/* FIXME: Move these to timer code */
-#define GPT1_BASE		(0x48028000)
-#define GPT1_REG32(offset)	__REG32(GPT1_BASE + (offset))
-
-/* Misc sysconfig */
-#define DISPC_SYSCONFIG		DISP_REG32(0x410)
-#define SPI_BASE		(OMAP24XX_L4_IO_BASE + 0x98000)
-#define MCSPI1_SYSCONFIG	__REG32(SPI_BASE + 0x10)
-#define MCSPI2_SYSCONFIG	__REG32(SPI_BASE + 0x2000 + 0x10)
-#define MCSPI3_SYSCONFIG	__REG32(OMAP24XX_L4_IO_BASE + 0xb8010)
-
-#define CAMERA_MMU_SYSCONFIG	__REG32(DISP_BASE + 0x2C10)
-#define CAMERA_DMA_SYSCONFIG	__REG32(DISP_BASE + 0x282C)
-#define SYSTEM_DMA_SYSCONFIG	__REG32(DISP_BASE + 0x602C)
-#define GPMC_SYSCONFIG		GPMC_REG32(0x010)
-#define MAILBOXES_SYSCONFIG	__REG32(OMAP24XX_L4_IO_BASE + 0x94010)
-#define UART1_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE + 0x6A054)
-#define UART2_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE + 0x6C054)
-#define UART3_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE + 0x6E054)
-#define SDRC_SYSCONFIG		__REG32(OMAP24XX_SDRC_BASE + 0x10)
-#define OMAP24XX_SMS_BASE	(L3_24XX_BASE + 0x8000)
-#define SMS_SYSCONFIG		__REG32(OMAP24XX_SMS_BASE + 0x10)
-#define SSI_SYSCONFIG		__REG32(DISP_BASE + 0x8010)
-
-/* rkw - good cannidates for PM_ to start what nm was trying */
-#define OMAP24XX_GPT2		(OMAP24XX_L4_IO_BASE + 0x2A000)
-#define OMAP24XX_GPT3		(OMAP24XX_L4_IO_BASE + 0x78000)
-#define OMAP24XX_GPT4		(OMAP24XX_L4_IO_BASE + 0x7A000)
-#define OMAP24XX_GPT5		(OMAP24XX_L4_IO_BASE + 0x7C000)
-#define OMAP24XX_GPT6		(OMAP24XX_L4_IO_BASE + 0x7E000)
-#define OMAP24XX_GPT7		(OMAP24XX_L4_IO_BASE + 0x80000)
-#define OMAP24XX_GPT8		(OMAP24XX_L4_IO_BASE + 0x82000)
-#define OMAP24XX_GPT9		(OMAP24XX_L4_IO_BASE + 0x84000)
-#define OMAP24XX_GPT10		(OMAP24XX_L4_IO_BASE + 0x86000)
-#define OMAP24XX_GPT11		(OMAP24XX_L4_IO_BASE + 0x88000)
-#define OMAP24XX_GPT12		(OMAP24XX_L4_IO_BASE + 0x8A000)
-
-/* FIXME: Move these to timer code */
-#define GPTIMER1_SYSCONFIG	GPT1_REG32(0x010)
-#define GPTIMER2_SYSCONFIG	__REG32(OMAP24XX_GPT2 + 0x10)
-#define GPTIMER3_SYSCONFIG	__REG32(OMAP24XX_GPT3 + 0x10)
-#define GPTIMER4_SYSCONFIG	__REG32(OMAP24XX_GPT4 + 0x10)
-#define GPTIMER5_SYSCONFIG	__REG32(OMAP24XX_GPT5 + 0x10)
-#define GPTIMER6_SYSCONFIG	__REG32(OMAP24XX_GPT6 + 0x10)
-#define GPTIMER7_SYSCONFIG	__REG32(OMAP24XX_GPT7 + 0x10)
-#define GPTIMER8_SYSCONFIG	__REG32(OMAP24XX_GPT8 + 0x10)
-#define GPTIMER9_SYSCONFIG	__REG32(OMAP24XX_GPT9 + 0x10)
-#define GPTIMER10_SYSCONFIG	__REG32(OMAP24XX_GPT10 + 0x10)
-#define GPTIMER11_SYSCONFIG	__REG32(OMAP24XX_GPT11 + 0x10)
-#define GPTIMER12_SYSCONFIG	__REG32(OMAP24XX_GPT12 + 0x10)
-
-/* FIXME: Move these to gpio code */
-#define OMAP24XX_GPIO_BASE	0x48018000
-#define GPIOX_BASE(X)		(OMAP24XX_GPIO_BASE + (0x2000 * ((X) - 1)))
-
-#define GPIO1_SYSCONFIG		__REG32((GPIOX_BASE(1) + 0x10))
-#define GPIO2_SYSCONFIG		__REG32((GPIOX_BASE(2) + 0x10))
-#define GPIO3_SYSCONFIG		__REG32((GPIOX_BASE(3) + 0x10))
-#define GPIO4_SYSCONFIG		__REG32((GPIOX_BASE(4) + 0x10))
-
-#if defined(CONFIG_ARCH_OMAP243X)
-#define GPIO5_SYSCONFIG		__REG32((OMAP24XX_GPIO5_BASE + 0x10))
-#endif
-
-/* GP TIMER 1 */
-#define GPTIMER1_TISTAT		GPT1_REG32(0x014)
-#define GPTIMER1_TISR		GPT1_REG32(0x018)
-#define GPTIMER1_TIER		GPT1_REG32(0x01C)
-#define GPTIMER1_TWER		GPT1_REG32(0x020)
-#define GPTIMER1_TCLR		GPT1_REG32(0x024)
-#define GPTIMER1_TCRR		GPT1_REG32(0x028)
-#define GPTIMER1_TLDR		GPT1_REG32(0x02C)
-#define GPTIMER1_TTGR		GPT1_REG32(0x030)
-#define GPTIMER1_TWPS		GPT1_REG32(0x034)
-#define GPTIMER1_TMAR		GPT1_REG32(0x038)
-#define GPTIMER1_TCAR1		GPT1_REG32(0x03C)
-#define GPTIMER1_TSICR		GPT1_REG32(0x040)
-#define GPTIMER1_TCAR2		GPT1_REG32(0x044)
-
-/* rkw -- base fix up please... */
-#define GPTIMER3_TISR		__REG32(OMAP24XX_L4_IO_BASE + 0x78018)
-
-/* SDRC */
-#define SDRC_DLLA_CTRL		__REG32(OMAP24XX_SDRC_BASE + 0x060)
-#define SDRC_DLLA_STATUS	__REG32(OMAP24XX_SDRC_BASE + 0x064)
-#define SDRC_DLLB_CTRL		__REG32(OMAP24XX_SDRC_BASE + 0x068)
-#define SDRC_DLLB_STATUS	__REG32(OMAP24XX_SDRC_BASE + 0x06C)
-#define SDRC_POWER		__REG32(OMAP24XX_SDRC_BASE + 0x070)
-#define SDRC_MR_0		__REG32(OMAP24XX_SDRC_BASE + 0x084)
-
-/* GPIO 1 */
-#define GPIO1_BASE		GPIOX_BASE(1)
-#define GPIO1_REG32(offset)	__REG32(GPIO1_BASE + (offset))
-#define GPIO1_IRQENABLE1	GPIO1_REG32(0x01C)
-#define GPIO1_IRQSTATUS1	GPIO1_REG32(0x018)
-#define GPIO1_IRQENABLE2	GPIO1_REG32(0x02C)
-#define GPIO1_IRQSTATUS2	GPIO1_REG32(0x028)
-#define GPIO1_WAKEUPENABLE	GPIO1_REG32(0x020)
-#define GPIO1_RISINGDETECT	GPIO1_REG32(0x048)
-#define GPIO1_DATAIN		GPIO1_REG32(0x038)
-#define GPIO1_OE		GPIO1_REG32(0x034)
-#define GPIO1_DATAOUT		GPIO1_REG32(0x03C)
-
-/* GPIO2 */
-#define GPIO2_BASE		GPIOX_BASE(2)
-#define GPIO2_REG32(offset)	__REG32(GPIO2_BASE + (offset))
-#define GPIO2_IRQENABLE1	GPIO2_REG32(0x01C)
-#define GPIO2_IRQSTATUS1	GPIO2_REG32(0x018)
-#define GPIO2_IRQENABLE2	GPIO2_REG32(0x02C)
-#define GPIO2_IRQSTATUS2	GPIO2_REG32(0x028)
-#define GPIO2_WAKEUPENABLE	GPIO2_REG32(0x020)
-#define GPIO2_RISINGDETECT	GPIO2_REG32(0x048)
-#define GPIO2_DATAIN		GPIO2_REG32(0x038)
-#define GPIO2_OE		GPIO2_REG32(0x034)
-#define GPIO2_DATAOUT		GPIO2_REG32(0x03C)
-#define GPIO2_DEBOUNCENABLE	GPIO2_REG32(0x050)
-#define GPIO2_DEBOUNCINGTIME	GPIO2_REG32(0x054)
-
-/* GPIO 3 */
-#define GPIO3_BASE		GPIOX_BASE(3)
-#define GPIO3_REG32(offset)	__REG32(GPIO3_BASE + (offset))
-#define GPIO3_IRQENABLE1	GPIO3_REG32(0x01C)
-#define GPIO3_IRQSTATUS1	GPIO3_REG32(0x018)
-#define GPIO3_IRQENABLE2	GPIO3_REG32(0x02C)
-#define GPIO3_IRQSTATUS2	GPIO3_REG32(0x028)
-#define GPIO3_WAKEUPENABLE	GPIO3_REG32(0x020)
-#define GPIO3_RISINGDETECT	GPIO3_REG32(0x048)
-#define GPIO3_FALLINGDETECT	GPIO3_REG32(0x04C)
-#define GPIO3_DATAIN		GPIO3_REG32(0x038)
-#define GPIO3_OE		GPIO3_REG32(0x034)
-#define GPIO3_DATAOUT		GPIO3_REG32(0x03C)
-#define GPIO3_DEBOUNCENABLE	GPIO3_REG32(0x050)
-#define GPIO3_DEBOUNCINGTIME	GPIO3_REG32(0x054)
-#define GPIO3_DEBOUNCENABLE	GPIO3_REG32(0x050)
-#define GPIO3_DEBOUNCINGTIME	GPIO3_REG32(0x054)
-
-/* GPIO 4 */
-#define GPIO4_BASE		GPIOX_BASE(4)
-#define GPIO4_REG32(offset)	__REG32(GPIO4_BASE + (offset))
-#define GPIO4_IRQENABLE1	GPIO4_REG32(0x01C)
-#define GPIO4_IRQSTATUS1	GPIO4_REG32(0x018)
-#define GPIO4_IRQENABLE2	GPIO4_REG32(0x02C)
-#define GPIO4_IRQSTATUS2	GPIO4_REG32(0x028)
-#define GPIO4_WAKEUPENABLE	GPIO4_REG32(0x020)
-#define GPIO4_RISINGDETECT	GPIO4_REG32(0x048)
-#define GPIO4_FALLINGDETECT	GPIO4_REG32(0x04C)
-#define GPIO4_DATAIN		GPIO4_REG32(0x038)
-#define GPIO4_OE		GPIO4_REG32(0x034)
-#define GPIO4_DATAOUT		GPIO4_REG32(0x03C)
-#define GPIO4_DEBOUNCENABLE	GPIO4_REG32(0x050)
-#define GPIO4_DEBOUNCINGTIME	GPIO4_REG32(0x054)
-
-#if defined(CONFIG_ARCH_OMAP243X)
-/* GPIO 5 */
-#define GPIO5_REG32(offset)	__REG32((OMAP24XX_GPIO5_BASE + (offset)))
-#define GPIO5_IRQENABLE1	GPIO5_REG32(0x01C)
-#define GPIO5_IRQSTATUS1	GPIO5_REG32(0x018)
-#define GPIO5_IRQENABLE2	GPIO5_REG32(0x02C)
-#define GPIO5_IRQSTATUS2	GPIO5_REG32(0x028)
-#define GPIO5_WAKEUPENABLE	GPIO5_REG32(0x020)
-#define GPIO5_RISINGDETECT	GPIO5_REG32(0x048)
-#define GPIO5_FALLINGDETECT	GPIO5_REG32(0x04C)
-#define GPIO5_DATAIN		GPIO5_REG32(0x038)
-#define GPIO5_OE		GPIO5_REG32(0x034)
-#define GPIO5_DATAOUT		GPIO5_REG32(0x03C)
-#define GPIO5_DEBOUNCENABLE	GPIO5_REG32(0x050)
-#define GPIO5_DEBOUNCINGTIME	GPIO5_REG32(0x054)
-#endif
-
-/* IO CONFIG */
-#define OMAP24XX_CTRL_BASE		(L4_24XX_BASE)
-#define CONTROL_REG32(offset)		__REG32(OMAP24XX_CTRL_BASE + (offset))
-
-#define CONTROL_PADCONF_SPI1_NCS2	CONTROL_REG32(0x104)
-#define CONTROL_PADCONF_SYS_XTALOUT	CONTROL_REG32(0x134)
-#define CONTROL_PADCONF_UART1_RX	CONTROL_REG32(0x0C8)
-#define CONTROL_PADCONF_MCBSP1_DX	CONTROL_REG32(0x10C)
-#define CONTROL_PADCONF_GPMC_NCS4	CONTROL_REG32(0x090)
-#define CONTROL_PADCONF_DSS_D5		CONTROL_REG32(0x0B8)
-#define CONTROL_PADCONF_DSS_D9		CONTROL_REG32(0x0BC)	/* 2420 */
-#define CONTROL_PADCONF_DSS_D13		CONTROL_REG32(0x0C0)
-#define CONTROL_PADCONF_DSS_VSYNC	CONTROL_REG32(0x0CC)
-#define CONTROL_PADCONF_SYS_NIRQW0	CONTROL_REG32(0x0BC)	/* 2430 */
-#define CONTROL_PADCONF_SSI1_FLAG_TX	CONTROL_REG32(0x108)	/* 2430 */
-
-/* CONTROL */
-#define CONTROL_DEVCONF		CONTROL_REG32(0x274)
-#define CONTROL_DEVCONF1	CONTROL_REG32(0x2E8)
-
-/* INTERRUPT CONTROLLER */
-#define INTC_BASE		((L4_24XX_BASE) + 0xfe000)
-#define INTC_REG32(offset)	__REG32(INTC_BASE + (offset))
-
-#define INTC1_U_BASE		INTC_REG32(0x000)
-#define INTC_MIR0		INTC_REG32(0x084)
-#define INTC_MIR_SET0		INTC_REG32(0x08C)
-#define INTC_MIR_CLEAR0		INTC_REG32(0x088)
-#define INTC_ISR_CLEAR0		INTC_REG32(0x094)
-#define INTC_MIR1		INTC_REG32(0x0A4)
-#define INTC_MIR_SET1		INTC_REG32(0x0AC)
-#define INTC_MIR_CLEAR1		INTC_REG32(0x0A8)
-#define INTC_ISR_CLEAR1		INTC_REG32(0x0B4)
-#define INTC_MIR2		INTC_REG32(0x0C4)
-#define INTC_MIR_SET2		INTC_REG32(0x0CC)
-#define INTC_MIR_CLEAR2		INTC_REG32(0x0C8)
-#define INTC_ISR_CLEAR2		INTC_REG32(0x0D4)
-#define INTC_SIR_IRQ		INTC_REG32(0x040)
-#define INTC_CONTROL		INTC_REG32(0x048)
-#define INTC_ILR11		INTC_REG32(0x12C)	/* PRCM on MPU PIC */
-#define INTC_ILR30		INTC_REG32(0x178)
-#define INTC_ILR31		INTC_REG32(0x17C)
-#define INTC_ILR32		INTC_REG32(0x180)
-#define INTC_ILR37		INTC_REG32(0x194)	/* GPIO4 on MPU PIC */
-#define INTC_SYSCONFIG		INTC_REG32(0x010)	/* GPT1 on MPU PIC */
-
-/* RAM FIREWALL */
-#define RAMFW_BASE		(0x68005000)
-#define RAMFW_REG32(offset)	__REG32(RAMFW_BASE + (offset))
-
-#define RAMFW_REQINFOPERM0	RAMFW_REG32(0x048)
-#define RAMFW_READPERM0		RAMFW_REG32(0x050)
-#define RAMFW_WRITEPERM0	RAMFW_REG32(0x058)
-
-/* GPMC CS1 FPGA ON USER INTERFACE MODULE */
-//#define DEBUG_BOARD_LED_REGISTER 0x04000014
-
-/* GPMC CS0 */
-#define GPMC_CONFIG1_0		GPMC_REG32(0x060)
-#define GPMC_CONFIG2_0		GPMC_REG32(0x064)
-#define GPMC_CONFIG3_0		GPMC_REG32(0x068)
-#define GPMC_CONFIG4_0		GPMC_REG32(0x06C)
-#define GPMC_CONFIG5_0		GPMC_REG32(0x070)
-#define GPMC_CONFIG6_0		GPMC_REG32(0x074)
-#define GPMC_CONFIG7_0		GPMC_REG32(0x078)
-
-/* GPMC CS1 */
-#define GPMC_CONFIG1_1		GPMC_REG32(0x090)
-#define GPMC_CONFIG2_1		GPMC_REG32(0x094)
-#define GPMC_CONFIG3_1		GPMC_REG32(0x098)
-#define GPMC_CONFIG4_1		GPMC_REG32(0x09C)
-#define GPMC_CONFIG5_1		GPMC_REG32(0x0a0)
-#define GPMC_CONFIG6_1		GPMC_REG32(0x0a4)
-#define GPMC_CONFIG7_1		GPMC_REG32(0x0a8)
-
-/* GPMC CS3 */
-#define GPMC_CONFIG1_3		GPMC_REG32(0x0F0)
-#define GPMC_CONFIG2_3		GPMC_REG32(0x0F4)
-#define GPMC_CONFIG3_3		GPMC_REG32(0x0F8)
-#define GPMC_CONFIG4_3		GPMC_REG32(0x0FC)
-#define GPMC_CONFIG5_3		GPMC_REG32(0x100)
-#define GPMC_CONFIG6_3		GPMC_REG32(0x104)
-#define GPMC_CONFIG7_3		GPMC_REG32(0x108)
-
-/* DSS */
-#define DSS_CONTROL		DISP_REG32(0x040)
-#define DISPC_CONTROL		DISP_REG32(0x440)
-#define DISPC_SYSSTATUS		DISP_REG32(0x414)
-#define DISPC_IRQSTATUS		DISP_REG32(0x418)
-#define DISPC_IRQENABLE		DISP_REG32(0x41C)
-#define DISPC_CONFIG		DISP_REG32(0x444)
-#define DISPC_DEFAULT_COLOR0	DISP_REG32(0x44C)
-#define DISPC_DEFAULT_COLOR1	DISP_REG32(0x450)
-#define DISPC_TRANS_COLOR0	DISP_REG32(0x454)
-#define DISPC_TRANS_COLOR1	DISP_REG32(0x458)
-#define DISPC_LINE_NUMBER	DISP_REG32(0x460)
-#define DISPC_TIMING_H		DISP_REG32(0x464)
-#define DISPC_TIMING_V		DISP_REG32(0x468)
-#define DISPC_POL_FREQ		DISP_REG32(0x46C)
-#define DISPC_DIVISOR		DISP_REG32(0x470)
-#define DISPC_SIZE_DIG		DISP_REG32(0x478)
-#define DISPC_SIZE_LCD		DISP_REG32(0x47C)
-#define DISPC_GFX_BA0		DISP_REG32(0x480)
-#define DISPC_GFX_BA1		DISP_REG32(0x484)
-#define DISPC_GFX_POSITION	DISP_REG32(0x488)
-#define DISPC_GFX_SIZE		DISP_REG32(0x48C)
-#define DISPC_GFX_ATTRIBUTES	DISP_REG32(0x4A0)
-#define DISPC_GFX_FIFO_THRESHOLD	DISP_REG32(0x4A4)
-#define DISPC_GFX_ROW_INC	DISP_REG32(0x4AC)
-#define DISPC_GFX_PIXEL_INC	DISP_REG32(0x4B0)
-#define DISPC_GFX_WINDOW_SKIP	DISP_REG32(0x4B4)
-#define DISPC_GFX_TABLE_BA	DISP_REG32(0x4B8)
-#define DISPC_DATA_CYCLE1	DISP_REG32(0x5D4)
-#define DISPC_DATA_CYCLE2	DISP_REG32(0x5D8)
-#define DISPC_DATA_CYCLE3	DISP_REG32(0x5DC)
-
-/* HSUSB Suspend */
-#define HSUSB_CTRL		__REG8(0x480AC001)
-#define USBOTG_POWER		__REG32(0x480AC000)
-
-/* HS MMC */
-#define MMCHS1_SYSCONFIG	__REG32(0x4809C010)
-#define MMCHS2_SYSCONFIG	__REG32(0x480b4010)
-
-#endif	/* __ASSEMBLER__ */
-
-#endif
-
-
-
-
-
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 90f5305..b12f423b 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -17,19 +17,27 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 
-#include "prcm-regs.h"
+#include <asm/io.h>
+
+#include "prm.h"
+#include "prm-regbits-24xx.h"
 
 extern void omap2_clk_prepare_for_reboot(void);
 
 u32 omap_prcm_get_reset_sources(void)
 {
-	return RM_RSTST_WKUP & 0x7f;
+	return prm_read_mod_reg(WKUP_MOD, RM_RSTST) & 0x7f;
 }
 EXPORT_SYMBOL(omap_prcm_get_reset_sources);
 
 /* Resets clock rates and reboots the system. Only called from system.h */
 void omap_prcm_arch_reset(char mode)
 {
+	u32 wkup;
 	omap2_clk_prepare_for_reboot();
-	RM_RSTCTRL_WKUP |= 2;
+
+	if (cpu_is_omap24xx()) {
+		wkup = prm_read_mod_reg(WKUP_MOD, RM_RSTCTRL) | OMAP_RST_DPLL3;
+		prm_write_mod_reg(wkup, WKUP_MOD, RM_RSTCTRL);
+	}
 }
diff --git a/arch/arm/mach-omap2/prm-regbits-24xx.h b/arch/arm/mach-omap2/prm-regbits-24xx.h
new file mode 100644
index 0000000..c6d17a3
--- /dev/null
+++ b/arch/arm/mach-omap2/prm-regbits-24xx.h
@@ -0,0 +1,279 @@
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_24XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_24XX_H
+
+/*
+ * OMAP24XX Power/Reset Management register bits
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "prm.h"
+
+/* Bits shared between registers */
+
+/* PRCM_IRQSTATUS_MPU, PM_IRQSTATUS_DSP, PRCM_IRQSTATUS_IVA shared bits */
+#define OMAP24XX_VOLTTRANS_ST				(1 << 2)
+#define OMAP24XX_WKUP2_ST				(1 << 1)
+#define OMAP24XX_WKUP1_ST				(1 << 0)
+
+/* PRCM_IRQENABLE_MPU, PM_IRQENABLE_DSP, PRCM_IRQENABLE_IVA shared bits */
+#define OMAP24XX_VOLTTRANS_EN				(1 << 2)
+#define OMAP24XX_WKUP2_EN				(1 << 1)
+#define OMAP24XX_WKUP1_EN				(1 << 0)
+
+/* PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_DSP, PM_WKDEP_MDM shared bits */
+#define OMAP24XX_EN_MPU					(1 << 1)
+#define OMAP24XX_EN_CORE				(1 << 0)
+
+/*
+ * PM_PWSTCTRL_MPU, PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSP, PM_PWSTCTRL_MDM
+ * shared bits
+ */
+#define OMAP24XX_MEMONSTATE_SHIFT			10
+#define OMAP24XX_MEMONSTATE_MASK			(0x3 << 10)
+#define OMAP24XX_MEMRETSTATE				(1 << 3)
+
+/* PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSP, PM_PWSTCTRL_MDM shared bits */
+#define OMAP24XX_FORCESTATE				(1 << 18)
+
+/*
+ * PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP,
+ * PM_PWSTST_MDM shared bits
+ */
+#define OMAP24XX_CLKACTIVITY				(1 << 19)
+
+/* PM_PWSTST_MPU, PM_PWSTST_CORE, PM_PWSTST_DSP shared bits */
+#define OMAP24XX_LASTSTATEENTERED_SHIFT			4
+#define OMAP24XX_LASTSTATEENTERED_MASK			(0x3 << 4)
+
+/* PM_PWSTST_MPU and PM_PWSTST_DSP shared bits */
+#define OMAP2430_MEMSTATEST_SHIFT			10
+#define OMAP2430_MEMSTATEST_MASK			(0x3 << 10)
+
+/* PM_PWSTST_GFX, PM_PWSTST_DSP, PM_PWSTST_MDM shared bits */
+#define OMAP24XX_POWERSTATEST_SHIFT			0
+#define OMAP24XX_POWERSTATEST_MASK			(0x3 << 0)
+
+
+/* Bits specific to each register */
+
+/* PRCM_REVISION */
+#define OMAP24XX_REV_SHIFT				0
+#define OMAP24XX_REV_MASK				(0xff << 0)
+
+/* PRCM_SYSCONFIG */
+#define OMAP24XX_AUTOIDLE				(1 << 0)
+
+/* PRCM_IRQSTATUS_MPU specific bits */
+#define OMAP2430_DPLL_RECAL_ST				(1 << 6)
+#define OMAP24XX_TRANSITION_ST				(1 << 5)
+#define OMAP24XX_EVGENOFF_ST				(1 << 4)
+#define OMAP24XX_EVGENON_ST				(1 << 3)
+
+/* PRCM_IRQENABLE_MPU specific bits */
+#define OMAP2430_DPLL_RECAL_EN				(1 << 6)
+#define OMAP24XX_TRANSITION_EN				(1 << 5)
+#define OMAP24XX_EVGENOFF_EN				(1 << 4)
+#define OMAP24XX_EVGENON_EN				(1 << 3)
+
+/* PRCM_VOLTCTRL */
+#define OMAP24XX_AUTO_EXTVOLT				(1 << 15)
+#define OMAP24XX_FORCE_EXTVOLT				(1 << 14)
+#define OMAP24XX_SETOFF_LEVEL_SHIFT			12
+#define OMAP24XX_SETOFF_LEVEL_MASK			(0x3 << 12)
+#define OMAP24XX_MEMRETCTRL				(1 << 8)
+#define OMAP24XX_SETRET_LEVEL_SHIFT			6
+#define OMAP24XX_SETRET_LEVEL_MASK			(0x3 << 6)
+#define OMAP24XX_VOLT_LEVEL_SHIFT			0
+#define OMAP24XX_VOLT_LEVEL_MASK			(0x3 << 0)
+
+/* PRCM_VOLTST */
+#define OMAP24XX_ST_VOLTLEVEL_SHIFT			0
+#define OMAP24XX_ST_VOLTLEVEL_MASK			(0x3 << 0)
+
+/* PRCM_CLKSRC_CTRL specific bits */
+
+/* PRCM_CLKOUT_CTRL */
+#define OMAP2420_CLKOUT2_EN_SHIFT			15
+#define OMAP2420_CLKOUT2_EN				(1 << 15)
+#define OMAP2420_CLKOUT2_DIV_SHIFT			11
+#define OMAP2420_CLKOUT2_DIV_MASK			(0x7 << 11)
+#define OMAP2420_CLKOUT2_SOURCE_SHIFT			8
+#define OMAP2420_CLKOUT2_SOURCE_MASK			(0x3 << 8)
+#define OMAP24XX_CLKOUT_EN_SHIFT			7
+#define OMAP24XX_CLKOUT_EN				(1 << 7)
+#define OMAP24XX_CLKOUT_DIV_SHIFT			3
+#define OMAP24XX_CLKOUT_DIV_MASK			(0x7 << 3)
+#define OMAP24XX_CLKOUT_SOURCE_SHIFT			0
+#define OMAP24XX_CLKOUT_SOURCE_MASK			(0x3 << 0)
+
+/* PRCM_CLKEMUL_CTRL */
+#define OMAP24XX_EMULATION_EN_SHIFT			0
+#define OMAP24XX_EMULATION_EN				(1 << 0)
+
+/* PRCM_CLKCFG_CTRL */
+#define OMAP24XX_VALID_CONFIG				(1 << 0)
+
+/* PRCM_CLKCFG_STATUS */
+#define OMAP24XX_CONFIG_STATUS				(1 << 0)
+
+/* PRCM_VOLTSETUP specific bits */
+
+/* PRCM_CLKSSETUP specific bits */
+
+/* PRCM_POLCTRL */
+#define OMAP2420_CLKOUT2_POL				(1 << 10)
+#define OMAP24XX_CLKOUT_POL				(1 << 9)
+#define OMAP24XX_CLKREQ_POL				(1 << 8)
+#define OMAP2430_USE_POWEROK				(1 << 2)
+#define OMAP2430_POWEROK_POL				(1 << 1)
+#define OMAP24XX_EXTVOL_POL				(1 << 0)
+
+/* RM_RSTST_MPU specific bits */
+/* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" instead */
+
+/* PM_WKDEP_MPU specific bits */
+#define OMAP2430_PM_WKDEP_MPU_EN_MDM			(1 << 5)
+#define OMAP24XX_PM_WKDEP_MPU_EN_DSP			(1 << 2)
+
+/* PM_EVGENCTRL_MPU specific bits */
+
+/* PM_EVEGENONTIM_MPU specific bits */
+
+/* PM_EVEGENOFFTIM_MPU specific bits */
+
+/* PM_PWSTCTRL_MPU specific bits */
+#define OMAP2430_FORCESTATE				(1 << 18)
+
+/* PM_PWSTST_MPU specific bits */
+/* INTRANSITION, CLKACTIVITY, POWERSTATE, MEMSTATEST are 2430 only */
+
+/* PM_WKEN1_CORE specific bits */
+
+/* PM_WKEN2_CORE specific bits */
+
+/* PM_WKST1_CORE specific bits*/
+
+/* PM_WKST2_CORE specific bits */
+
+/* PM_WKDEP_CORE specific bits*/
+#define OMAP2430_PM_WKDEP_CORE_EN_MDM			(1 << 5)
+#define OMAP24XX_PM_WKDEP_CORE_EN_GFX			(1 << 3)
+#define OMAP24XX_PM_WKDEP_CORE_EN_DSP			(1 << 2)
+
+/* PM_PWSTCTRL_CORE specific bits */
+#define OMAP24XX_MEMORYCHANGE				(1 << 20)
+#define OMAP24XX_MEM3ONSTATE_SHIFT			14
+#define OMAP24XX_MEM3ONSTATE_MASK			(0x3 << 14)
+#define OMAP24XX_MEM2ONSTATE_SHIFT			12
+#define OMAP24XX_MEM2ONSTATE_MASK			(0x3 << 12)
+#define OMAP24XX_MEM1ONSTATE_SHIFT			10
+#define OMAP24XX_MEM1ONSTATE_MASK			(0x3 << 10)
+#define OMAP24XX_MEM3RETSTATE				(1 << 5)
+#define OMAP24XX_MEM2RETSTATE				(1 << 4)
+#define OMAP24XX_MEM1RETSTATE				(1 << 3)
+
+/* PM_PWSTST_CORE specific bits */
+#define OMAP24XX_MEM3STATEST_SHIFT			14
+#define OMAP24XX_MEM3STATEST_MASK			(0x3 << 14)
+#define OMAP24XX_MEM2STATEST_SHIFT			12
+#define OMAP24XX_MEM2STATEST_MASK			(0x3 << 12)
+#define OMAP24XX_MEM1STATEST_SHIFT			10
+#define OMAP24XX_MEM1STATEST_MASK			(0x3 << 10)
+
+/* RM_RSTCTRL_GFX */
+#define OMAP24XX_GFX_RST				(1 << 0)
+
+/* RM_RSTST_GFX specific bits */
+#define OMAP24XX_GFX_SW_RST				(1 << 4)
+
+/* PM_PWSTCTRL_GFX specific bits */
+
+/* PM_WKDEP_GFX specific bits */
+/* 2430 often calls EN_WAKEUP "EN_WKUP" */
+
+/* RM_RSTCTRL_WKUP specific bits */
+
+/* RM_RSTTIME_WKUP specific bits */
+
+/* RM_RSTST_WKUP specific bits */
+/* 2430 calls EXTWMPU_RST "EXTWARM_RST" and GLOBALWMPU_RST "GLOBALWARM_RST" */
+#define OMAP24XX_EXTWMPU_RST				(1 << 6)
+#define OMAP24XX_SECU_WD_RST				(1 << 5)
+#define OMAP24XX_MPU_WD_RST				(1 << 4)
+#define OMAP24XX_SECU_VIOL_RST				(1 << 3)
+
+/* PM_WKEN_WKUP specific bits */
+
+/* PM_WKST_WKUP specific bits */
+
+/* RM_RSTCTRL_DSP */
+#define OMAP2420_RST_IVA				(1 << 8)
+#define OMAP24XX_RST2_DSP				(1 << 1)
+#define OMAP24XX_RST1_DSP				(1 << 0)
+
+/* RM_RSTST_DSP specific bits */
+/* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" */
+#define OMAP2420_IVA_SW_RST				(1 << 8)
+#define OMAP24XX_DSP_SW_RST2				(1 << 5)
+#define OMAP24XX_DSP_SW_RST1				(1 << 4)
+
+/* PM_WKDEP_DSP specific bits */
+
+/* PM_PWSTCTRL_DSP specific bits */
+/* 2430 only: MEMONSTATE, MEMRETSTATE */
+#define OMAP2420_MEMIONSTATE_SHIFT			12
+#define OMAP2420_MEMIONSTATE_MASK			(0x3 << 12)
+#define OMAP2420_MEMIRETSTATE				(1 << 4)
+
+/* PM_PWSTST_DSP specific bits */
+/* MEMSTATEST is 2430 only */
+#define OMAP2420_MEMISTATEST_SHIFT			12
+#define OMAP2420_MEMISTATEST_MASK			(0x3 << 12)
+
+/* PRCM_IRQSTATUS_DSP specific bits */
+
+/* PRCM_IRQENABLE_DSP specific bits */
+
+/* RM_RSTCTRL_MDM */
+/* 2430 only */
+#define OMAP2430_PWRON1_MDM				(1 << 1)
+#define OMAP2430_RST1_MDM				(1 << 0)
+
+/* RM_RSTST_MDM specific bits */
+/* 2430 only */
+#define OMAP2430_MDM_SECU_VIOL				(1 << 6)
+#define OMAP2430_MDM_SW_PWRON1				(1 << 5)
+#define OMAP2430_MDM_SW_RST1				(1 << 4)
+
+/* PM_WKEN_MDM */
+/* 2430 only */
+#define OMAP2430_PM_WKEN_MDM_EN_MDM			(1 << 0)
+
+/* PM_WKST_MDM specific bits */
+/* 2430 only */
+
+/* PM_WKDEP_MDM specific bits */
+/* 2430 only */
+
+/* PM_PWSTCTRL_MDM specific bits */
+/* 2430 only */
+#define OMAP2430_KILLDOMAINWKUP				(1 << 19)
+
+/* PM_PWSTST_MDM specific bits */
+/* 2430 only */
+
+/* PRCM_IRQSTATUS_IVA */
+/* 2420 only */
+
+/* PRCM_IRQENABLE_IVA */
+/* 2420 only */
+
+#endif
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
new file mode 100644
index 0000000..b4686bc
--- /dev/null
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -0,0 +1,582 @@
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
+
+/*
+ * OMAP3430 Power/Reset Management register bits
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "prm.h"
+
+/* Shared register bits */
+
+/* PRM_VC_CMD_VAL_0, PRM_VC_CMD_VAL_1 shared bits */
+#define OMAP3430_ON_SHIFT				24
+#define OMAP3430_ON_MASK				(0xff << 24)
+#define OMAP3430_ONLP_SHIFT				16
+#define OMAP3430_ONLP_MASK				(0xff << 16)
+#define OMAP3430_RET_SHIFT				8
+#define OMAP3430_RET_MASK				(0xff << 8)
+#define OMAP3430_OFF_SHIFT				0
+#define OMAP3430_OFF_MASK				(0xff << 0)
+
+/* PRM_VP1_CONFIG, PRM_VP2_CONFIG shared bits */
+#define OMAP3430_ERROROFFSET_SHIFT			24
+#define OMAP3430_ERROROFFSET_MASK			(0xff << 24)
+#define OMAP3430_ERRORGAIN_SHIFT			16
+#define OMAP3430_ERRORGAIN_MASK				(0xff << 16)
+#define OMAP3430_INITVOLTAGE_SHIFT			8
+#define OMAP3430_INITVOLTAGE_MASK			(0xff << 8)
+#define OMAP3430_TIMEOUTEN				(1 << 3)
+#define OMAP3430_INITVDD				(1 << 2)
+#define OMAP3430_FORCEUPDATE				(1 << 1)
+#define OMAP3430_VPENABLE				(1 << 0)
+
+/* PRM_VP1_VSTEPMIN, PRM_VP2_VSTEPMIN shared bits */
+#define OMAP3430_SMPSWAITTIMEMIN_SHIFT			8
+#define OMAP3430_SMPSWAITTIMEMIN_MASK			(0xffff << 8)
+#define OMAP3430_VSTEPMIN_SHIFT				0
+#define OMAP3430_VSTEPMIN_MASK				(0xff << 0)
+
+/* PRM_VP1_VSTEPMAX, PRM_VP2_VSTEPMAX shared bits */
+#define OMAP3430_SMPSWAITTIMEMAX_SHIFT			8
+#define OMAP3430_SMPSWAITTIMEMAX_MASK			(0xffff << 8)
+#define OMAP3430_VSTEPMAX_SHIFT				0
+#define OMAP3430_VSTEPMAX_MASK				(0xff << 0)
+
+/* PRM_VP1_VLIMITTO, PRM_VP2_VLIMITTO shared bits */
+#define OMAP3430_VDDMAX_SHIFT				24
+#define OMAP3430_VDDMAX_MASK				(0xff << 24)
+#define OMAP3430_VDDMIN_SHIFT				16
+#define OMAP3430_VDDMIN_MASK				(0xff << 16)
+#define OMAP3430_TIMEOUT_SHIFT				0
+#define OMAP3430_TIMEOUT_MASK				(0xffff << 0)
+
+/* PRM_VP1_VOLTAGE, PRM_VP2_VOLTAGE shared bits */
+#define OMAP3430_VPVOLTAGE_SHIFT			0
+#define OMAP3430_VPVOLTAGE_MASK				(0xff << 0)
+
+/* PRM_VP1_STATUS, PRM_VP2_STATUS shared bits */
+#define OMAP3430_VPINIDLE				(1 << 0)
+
+/* PM_WKDEP_IVA2, PM_WKDEP_MPU shared bits */
+#define OMAP3430_EN_PER					(1 << 7)
+
+/* PM_PWSTCTRL_IVA2, PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE shared bits */
+#define OMAP3430_MEMORYCHANGE				(1 << 3)
+
+/* PM_PWSTST_IVA2, PM_PWSTST_CORE shared bits */
+#define OMAP3430_LOGICSTATEST				(1 << 2)
+
+/* PM_PREPWSTST_IVA2, PM_PREPWSTST_CORE shared bits */
+#define OMAP3430_LASTLOGICSTATEENTERED				(1 << 2)
+
+/*
+ * PM_PREPWSTST_IVA2, PM_PREPWSTST_MPU, PM_PREPWSTST_CORE,
+ * PM_PREPWSTST_GFX, PM_PREPWSTST_DSS, PM_PREPWSTST_CAM,
+ * PM_PREPWSTST_PER, PM_PREPWSTST_NEON shared bits
+ */
+#define OMAP3430_LASTPOWERSTATEENTERED_SHIFT			0
+#define OMAP3430_LASTPOWERSTATEENTERED_MASK			(0x3 << 0)
+
+/* PRM_IRQSTATUS_IVA2, PRM_IRQSTATUS_MPU shared bits */
+#define OMAP3430_WKUP_ST				(1 << 0)
+
+/* PRM_IRQENABLE_IVA2, PRM_IRQENABLE_MPU shared bits */
+#define OMAP3430_WKUP_EN					(1 << 0)
+
+/* PM_MPUGRPSEL1_CORE, PM_IVA2GRPSEL1_CORE shared bits */
+#define OMAP3430_GRPSEL_MMC2				(1 << 25)
+#define OMAP3430_GRPSEL_MMC1				(1 << 24)
+#define OMAP3430_GRPSEL_MCSPI4				(1 << 21)
+#define OMAP3430_GRPSEL_MCSPI3				(1 << 20)
+#define OMAP3430_GRPSEL_MCSPI2				(1 << 19)
+#define OMAP3430_GRPSEL_MCSPI1				(1 << 18)
+#define OMAP3430_GRPSEL_I2C3				(1 << 17)
+#define OMAP3430_GRPSEL_I2C2				(1 << 16)
+#define OMAP3430_GRPSEL_I2C1				(1 << 15)
+#define OMAP3430_GRPSEL_UART2				(1 << 14)
+#define OMAP3430_GRPSEL_UART1				(1 << 13)
+#define OMAP3430_GRPSEL_GPT11				(1 << 12)
+#define OMAP3430_GRPSEL_GPT10				(1 << 11)
+#define OMAP3430_GRPSEL_MCBSP5				(1 << 10)
+#define OMAP3430_GRPSEL_MCBSP1				(1 << 9)
+#define OMAP3430_GRPSEL_HSOTGUSB			(1 << 4)
+#define OMAP3430_GRPSEL_D2D				(1 << 3)
+
+/*
+ * PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM,
+ * PM_PWSTCTRL_PER shared bits
+ */
+#define OMAP3430_MEMONSTATE_SHIFT			16
+#define OMAP3430_MEMONSTATE_MASK			(0x3 << 16)
+#define OMAP3430_MEMRETSTATE				(1 << 8)
+
+/* PM_MPUGRPSEL_PER, PM_IVA2GRPSEL_PER shared bits */
+#define OMAP3430_GRPSEL_GPIO6				(1 << 17)
+#define OMAP3430_GRPSEL_GPIO5				(1 << 16)
+#define OMAP3430_GRPSEL_GPIO4				(1 << 15)
+#define OMAP3430_GRPSEL_GPIO3				(1 << 14)
+#define OMAP3430_GRPSEL_GPIO2				(1 << 13)
+#define OMAP3430_GRPSEL_UART3				(1 << 11)
+#define OMAP3430_GRPSEL_GPT9				(1 << 10)
+#define OMAP3430_GRPSEL_GPT8				(1 << 9)
+#define OMAP3430_GRPSEL_GPT7				(1 << 8)
+#define OMAP3430_GRPSEL_GPT6				(1 << 7)
+#define OMAP3430_GRPSEL_GPT5				(1 << 6)
+#define OMAP3430_GRPSEL_GPT4				(1 << 5)
+#define OMAP3430_GRPSEL_GPT3				(1 << 4)
+#define OMAP3430_GRPSEL_GPT2				(1 << 3)
+#define OMAP3430_GRPSEL_MCBSP4				(1 << 2)
+#define OMAP3430_GRPSEL_MCBSP3				(1 << 1)
+#define OMAP3430_GRPSEL_MCBSP2				(1 << 0)
+
+/* PM_MPUGRPSEL_WKUP, PM_IVA2GRPSEL_WKUP shared bits */
+#define OMAP3430_GRPSEL_IO				(1 << 8)
+#define OMAP3430_GRPSEL_SR2				(1 << 7)
+#define OMAP3430_GRPSEL_SR1				(1 << 6)
+#define OMAP3430_GRPSEL_GPIO1				(1 << 3)
+#define OMAP3430_GRPSEL_GPT12				(1 << 1)
+#define OMAP3430_GRPSEL_GPT1				(1 << 0)
+
+/* Bits specific to each register */
+
+/* RM_RSTCTRL_IVA2 */
+#define OMAP3430_RST3_IVA2				(1 << 2)
+#define OMAP3430_RST2_IVA2				(1 << 1)
+#define OMAP3430_RST1_IVA2				(1 << 0)
+
+/* RM_RSTST_IVA2 specific bits */
+#define OMAP3430_EMULATION_VSEQ_RST			(1 << 13)
+#define OMAP3430_EMULATION_VHWA_RST			(1 << 12)
+#define OMAP3430_EMULATION_IVA2_RST			(1 << 11)
+#define OMAP3430_IVA2_SW_RST3				(1 << 10)
+#define OMAP3430_IVA2_SW_RST2				(1 << 9)
+#define OMAP3430_IVA2_SW_RST1				(1 << 8)
+
+/* PM_WKDEP_IVA2 specific bits */
+
+/* PM_PWSTCTRL_IVA2 specific bits */
+#define OMAP3430_L2FLATMEMONSTATE_SHIFT			22
+#define OMAP3430_L2FLATMEMONSTATE_MASK			(0x3 << 22)
+#define OMAP3430_SHAREDL2CACHEFLATONSTATE_SHIFT		20
+#define OMAP3430_SHAREDL2CACHEFLATONSTATE_MASK		(0x3 << 20)
+#define OMAP3430_L1FLATMEMONSTATE_SHIFT			18
+#define OMAP3430_L1FLATMEMONSTATE_MASK			(0x3 << 18)
+#define OMAP3430_SHAREDL1CACHEFLATONSTATE_SHIFT		16
+#define OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK		(0x3 << 16)
+#define OMAP3430_L2FLATMEMRETSTATE			(1 << 11)
+#define OMAP3430_SHAREDL2CACHEFLATRETSTATE		(1 << 10)
+#define OMAP3430_L1FLATMEMRETSTATE			(1 << 9)
+#define OMAP3430_SHAREDL1CACHEFLATRETSTATE		(1 << 8)
+
+/* PM_PWSTST_IVA2 specific bits */
+#define OMAP3430_L2FLATMEMSTATEST_SHIFT			10
+#define OMAP3430_L2FLATMEMSTATEST_MASK			(0x3 << 10)
+#define OMAP3430_SHAREDL2CACHEFLATSTATEST_SHIFT		8
+#define OMAP3430_SHAREDL2CACHEFLATSTATEST_MASK		(0x3 << 8)
+#define OMAP3430_L1FLATMEMSTATEST_SHIFT			6
+#define OMAP3430_L1FLATMEMSTATEST_MASK			(0x3 << 6)
+#define OMAP3430_SHAREDL1CACHEFLATSTATEST_SHIFT		4
+#define OMAP3430_SHAREDL1CACHEFLATSTATEST_MASK		(0x3 << 4)
+
+/* PM_PREPWSTST_IVA2 specific bits */
+#define OMAP3430_LASTL2FLATMEMSTATEENTERED_SHIFT		10
+#define OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK			(0x3 << 10)
+#define OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_SHIFT	8
+#define OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK		(0x3 << 8)
+#define OMAP3430_LASTL1FLATMEMSTATEENTERED_SHIFT		6
+#define OMAP3430_LASTL1FLATMEMSTATEENTERED_MASK			(0x3 << 6)
+#define OMAP3430_LASTSHAREDL1CACHEFLATSTATEENTERED_SHIFT	4
+#define OMAP3430_LASTSHAREDL1CACHEFLATSTATEENTERED_MASK		(0x3 << 4)
+
+/* PRM_IRQSTATUS_IVA2 specific bits */
+#define OMAP3430_PRM_IRQSTATUS_IVA2_IVA2_DPLL_ST	(1 << 2)
+#define OMAP3430_FORCEWKUP_ST				(1 << 1)
+
+/* PRM_IRQENABLE_IVA2 specific bits */
+#define OMAP3430_PRM_IRQENABLE_IVA2_IVA2_DPLL_RECAL_EN		(1 << 2)
+#define OMAP3430_FORCEWKUP_EN					(1 << 1)
+
+/* PRM_REVISION specific bits */
+
+/* PRM_SYSCONFIG specific bits */
+
+/* PRM_IRQSTATUS_MPU specific bits */
+#define OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT		25
+#define OMAP3430ES2_SND_PERIPH_DPLL_ST			(1 << 25)
+#define OMAP3430_VC_TIMEOUTERR_ST			(1 << 24)
+#define OMAP3430_VC_RAERR_ST				(1 << 23)
+#define OMAP3430_VC_SAERR_ST				(1 << 22)
+#define OMAP3430_VP2_TRANXDONE_ST			(1 << 21)
+#define OMAP3430_VP2_EQVALUE_ST				(1 << 20)
+#define OMAP3430_VP2_NOSMPSACK_ST			(1 << 19)
+#define OMAP3430_VP2_MAXVDD_ST				(1 << 18)
+#define OMAP3430_VP2_MINVDD_ST				(1 << 17)
+#define OMAP3430_VP2_OPPCHANGEDONE_ST			(1 << 16)
+#define OMAP3430_VP1_TRANXDONE_ST			(1 << 15)
+#define OMAP3430_VP1_EQVALUE_ST				(1 << 14)
+#define OMAP3430_VP1_NOSMPSACK_ST			(1 << 13)
+#define OMAP3430_VP1_MAXVDD_ST				(1 << 12)
+#define OMAP3430_VP1_MINVDD_ST				(1 << 11)
+#define OMAP3430_VP1_OPPCHANGEDONE_ST			(1 << 10)
+#define OMAP3430_IO_ST					(1 << 9)
+#define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST		(1 << 8)
+#define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT	8
+#define OMAP3430_MPU_DPLL_ST				(1 << 7)
+#define OMAP3430_MPU_DPLL_ST_SHIFT			7
+#define OMAP3430_PERIPH_DPLL_ST				(1 << 6)
+#define OMAP3430_PERIPH_DPLL_ST_SHIFT			6
+#define OMAP3430_CORE_DPLL_ST				(1 << 5)
+#define OMAP3430_CORE_DPLL_ST_SHIFT			5
+#define OMAP3430_TRANSITION_ST				(1 << 4)
+#define OMAP3430_EVGENOFF_ST				(1 << 3)
+#define OMAP3430_EVGENON_ST				(1 << 2)
+#define OMAP3430_FS_USB_WKUP_ST				(1 << 1)
+
+/* PRM_IRQENABLE_MPU specific bits */
+#define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT		25
+#define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN			(1 << 25)
+#define OMAP3430_VC_TIMEOUTERR_EN				(1 << 24)
+#define OMAP3430_VC_RAERR_EN					(1 << 23)
+#define OMAP3430_VC_SAERR_EN					(1 << 22)
+#define OMAP3430_VP2_TRANXDONE_EN				(1 << 21)
+#define OMAP3430_VP2_EQVALUE_EN					(1 << 20)
+#define OMAP3430_VP2_NOSMPSACK_EN				(1 << 19)
+#define OMAP3430_VP2_MAXVDD_EN					(1 << 18)
+#define OMAP3430_VP2_MINVDD_EN					(1 << 17)
+#define OMAP3430_VP2_OPPCHANGEDONE_EN				(1 << 16)
+#define OMAP3430_VP1_TRANXDONE_EN				(1 << 15)
+#define OMAP3430_VP1_EQVALUE_EN					(1 << 14)
+#define OMAP3430_VP1_NOSMPSACK_EN				(1 << 13)
+#define OMAP3430_VP1_MAXVDD_EN					(1 << 12)
+#define OMAP3430_VP1_MINVDD_EN					(1 << 11)
+#define OMAP3430_VP1_OPPCHANGEDONE_EN				(1 << 10)
+#define OMAP3430_IO_EN						(1 << 9)
+#define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN		(1 << 8)
+#define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT	8
+#define OMAP3430_MPU_DPLL_RECAL_EN				(1 << 7)
+#define OMAP3430_MPU_DPLL_RECAL_EN_SHIFT			7
+#define OMAP3430_PERIPH_DPLL_RECAL_EN				(1 << 6)
+#define OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT			6
+#define OMAP3430_CORE_DPLL_RECAL_EN				(1 << 5)
+#define OMAP3430_CORE_DPLL_RECAL_EN_SHIFT			5
+#define OMAP3430_TRANSITION_EN					(1 << 4)
+#define OMAP3430_EVGENOFF_EN					(1 << 3)
+#define OMAP3430_EVGENON_EN					(1 << 2)
+#define OMAP3430_FS_USB_WKUP_EN					(1 << 1)
+
+/* RM_RSTST_MPU specific bits */
+#define OMAP3430_EMULATION_MPU_RST			(1 << 11)
+
+/* PM_WKDEP_MPU specific bits */
+#define OMAP3430_PM_WKDEP_MPU_EN_DSS			(1 << 5)
+#define OMAP3430_PM_WKDEP_MPU_EN_IVA2			(1 << 2)
+
+/* PM_EVGENCTRL_MPU */
+#define OMAP3430_OFFLOADMODE_SHIFT			3
+#define OMAP3430_OFFLOADMODE_MASK			(0x3 << 3)
+#define OMAP3430_ONLOADMODE_SHIFT			1
+#define OMAP3430_ONLOADMODE_MASK			(0x3 << 1)
+#define OMAP3430_ENABLE					(1 << 0)
+
+/* PM_EVGENONTIM_MPU */
+#define OMAP3430_ONTIMEVAL_SHIFT			0
+#define OMAP3430_ONTIMEVAL_MASK				(0xffffffff << 0)
+
+/* PM_EVGENOFFTIM_MPU */
+#define OMAP3430_OFFTIMEVAL_SHIFT			0
+#define OMAP3430_OFFTIMEVAL_MASK			(0xffffffff << 0)
+
+/* PM_PWSTCTRL_MPU specific bits */
+#define OMAP3430_L2CACHEONSTATE_SHIFT			16
+#define OMAP3430_L2CACHEONSTATE_MASK			(0x3 << 16)
+#define OMAP3430_L2CACHERETSTATE			(1 << 8)
+#define OMAP3430_LOGICL1CACHERETSTATE			(1 << 2)
+
+/* PM_PWSTST_MPU specific bits */
+#define OMAP3430_L2CACHESTATEST_SHIFT			6
+#define OMAP3430_L2CACHESTATEST_MASK			(0x3 << 6)
+#define OMAP3430_LOGICL1CACHESTATEST			(1 << 2)
+
+/* PM_PREPWSTST_MPU specific bits */
+#define OMAP3430_LASTL2CACHESTATEENTERED_SHIFT		6
+#define OMAP3430_LASTL2CACHESTATEENTERED_MASK		(0x3 << 6)
+#define OMAP3430_LASTLOGICL1CACHESTATEENTERED		(1 << 2)
+
+/* RM_RSTCTRL_CORE */
+#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON		(1 << 1)
+#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST			(1 << 0)
+
+/* RM_RSTST_CORE specific bits */
+#define OMAP3430_MODEM_SECURITY_VIOL_RST		(1 << 10)
+#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RSTPWRON	(1 << 9)
+#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RST		(1 << 8)
+
+/* PM_WKEN1_CORE specific bits */
+
+/* PM_MPUGRPSEL1_CORE specific bits */
+#define OMAP3430_GRPSEL_FSHOSTUSB			(1 << 5)
+
+/* PM_IVA2GRPSEL1_CORE specific bits */
+
+/* PM_WKST1_CORE specific bits */
+
+/* PM_PWSTCTRL_CORE specific bits */
+#define OMAP3430_MEM2ONSTATE_SHIFT			18
+#define OMAP3430_MEM2ONSTATE_MASK			(0x3 << 18)
+#define OMAP3430_MEM1ONSTATE_SHIFT			16
+#define OMAP3430_MEM1ONSTATE_MASK			(0x3 << 16)
+#define OMAP3430_MEM2RETSTATE				(1 << 9)
+#define OMAP3430_MEM1RETSTATE				(1 << 8)
+
+/* PM_PWSTST_CORE specific bits */
+#define OMAP3430_MEM2STATEST_SHIFT			6
+#define OMAP3430_MEM2STATEST_MASK			(0x3 << 6)
+#define OMAP3430_MEM1STATEST_SHIFT			4
+#define OMAP3430_MEM1STATEST_MASK			(0x3 << 4)
+
+/* PM_PREPWSTST_CORE specific bits */
+#define OMAP3430_LASTMEM2STATEENTERED_SHIFT		6
+#define OMAP3430_LASTMEM2STATEENTERED_MASK		(0x3 << 6)
+#define OMAP3430_LASTMEM1STATEENTERED_SHIFT		4
+#define OMAP3430_LASTMEM1STATEENTERED_MASK		(0x3 << 4)
+
+/* RM_RSTST_GFX specific bits */
+
+/* PM_WKDEP_GFX specific bits */
+#define OMAP3430_PM_WKDEP_GFX_EN_IVA2			(1 << 2)
+
+/* PM_PWSTCTRL_GFX specific bits */
+
+/* PM_PWSTST_GFX specific bits */
+
+/* PM_PREPWSTST_GFX specific bits */
+
+/* PM_WKEN_WKUP specific bits */
+#define OMAP3430_EN_IO					(1 << 8)
+
+/* PM_MPUGRPSEL_WKUP specific bits */
+
+/* PM_IVA2GRPSEL_WKUP specific bits */
+
+/* PM_WKST_WKUP specific bits */
+#define OMAP3430_ST_IO					(1 << 8)
+
+/* PRM_CLKSEL */
+#define OMAP3430_SYS_CLKIN_SEL_SHIFT			0
+#define OMAP3430_SYS_CLKIN_SEL_MASK			(0x7 << 0)
+
+/* PRM_CLKOUT_CTRL */
+#define OMAP3430_CLKOUT_EN				(1 << 7)
+#define OMAP3430_CLKOUT_EN_SHIFT			7
+
+/* RM_RSTST_DSS specific bits */
+
+/* PM_WKEN_DSS */
+#define OMAP3430_PM_WKEN_DSS_EN_DSS			(1 << 0)
+
+/* PM_WKDEP_DSS specific bits */
+#define OMAP3430_PM_WKDEP_DSS_EN_IVA2			(1 << 2)
+
+/* PM_PWSTCTRL_DSS specific bits */
+
+/* PM_PWSTST_DSS specific bits */
+
+/* PM_PREPWSTST_DSS specific bits */
+
+/* RM_RSTST_CAM specific bits */
+
+/* PM_WKDEP_CAM specific bits */
+#define OMAP3430_PM_WKDEP_CAM_EN_IVA2			(1 << 2)
+
+/* PM_PWSTCTRL_CAM specific bits */
+
+/* PM_PWSTST_CAM specific bits */
+
+/* PM_PREPWSTST_CAM specific bits */
+
+/* PM_PWSTCTRL_USBHOST specific bits */
+#define OMAP3430ES2_SAVEANDRESTORE_SHIFT		(1 << 4)
+
+/* RM_RSTST_PER specific bits */
+
+/* PM_WKEN_PER specific bits */
+
+/* PM_MPUGRPSEL_PER specific bits */
+
+/* PM_IVA2GRPSEL_PER specific bits */
+
+/* PM_WKST_PER specific bits */
+
+/* PM_WKDEP_PER specific bits */
+#define OMAP3430_PM_WKDEP_PER_EN_IVA2			(1 << 2)
+
+/* PM_PWSTCTRL_PER specific bits */
+
+/* PM_PWSTST_PER specific bits */
+
+/* PM_PREPWSTST_PER specific bits */
+
+/* RM_RSTST_EMU specific bits */
+
+/* PM_PWSTST_EMU specific bits */
+
+/* PRM_VC_SMPS_SA */
+#define OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT		16
+#define OMAP3430_PRM_VC_SMPS_SA_SA1_MASK		(0x7f << 16)
+#define OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT		0
+#define OMAP3430_PRM_VC_SMPS_SA_SA0_MASK		(0x7f << 0)
+
+/* PRM_VC_SMPS_VOL_RA */
+#define OMAP3430_VOLRA1_SHIFT				16
+#define OMAP3430_VOLRA1_MASK				(0xff << 16)
+#define OMAP3430_VOLRA0_SHIFT				0
+#define OMAP3430_VOLRA0_MASK				(0xff << 0)
+
+/* PRM_VC_SMPS_CMD_RA */
+#define OMAP3430_CMDRA1_SHIFT				16
+#define OMAP3430_CMDRA1_MASK				(0xff << 16)
+#define OMAP3430_CMDRA0_SHIFT				0
+#define OMAP3430_CMDRA0_MASK				(0xff << 0)
+
+/* PRM_VC_CMD_VAL_0 specific bits */
+
+/* PRM_VC_CMD_VAL_1 specific bits */
+
+/* PRM_VC_CH_CONF */
+#define OMAP3430_CMD1					(1 << 20)
+#define OMAP3430_RACEN1					(1 << 19)
+#define OMAP3430_RAC1					(1 << 18)
+#define OMAP3430_RAV1					(1 << 17)
+#define OMAP3430_PRM_VC_CH_CONF_SA1			(1 << 16)
+#define OMAP3430_CMD0					(1 << 4)
+#define OMAP3430_RACEN0					(1 << 3)
+#define OMAP3430_RAC0					(1 << 2)
+#define OMAP3430_RAV0					(1 << 1)
+#define OMAP3430_PRM_VC_CH_CONF_SA0			(1 << 0)
+
+/* PRM_VC_I2C_CFG */
+#define OMAP3430_HSMASTER				(1 << 5)
+#define OMAP3430_SREN					(1 << 4)
+#define OMAP3430_HSEN					(1 << 3)
+#define OMAP3430_MCODE_SHIFT				0
+#define OMAP3430_MCODE_MASK				(0x7 << 0)
+
+/* PRM_VC_BYPASS_VAL */
+#define OMAP3430_VALID					(1 << 24)
+#define OMAP3430_DATA_SHIFT				16
+#define OMAP3430_DATA_MASK				(0xff << 16)
+#define OMAP3430_REGADDR_SHIFT				8
+#define OMAP3430_REGADDR_MASK				(0xff << 8)
+#define OMAP3430_SLAVEADDR_SHIFT			0
+#define OMAP3430_SLAVEADDR_MASK				(0x7f << 0)
+
+/* PRM_RSTCTRL */
+#define OMAP3430_RST_DPLL3				(1 << 2)
+#define OMAP3430_RST_GS					(1 << 1)
+
+/* PRM_RSTTIME */
+#define OMAP3430_RSTTIME2_SHIFT				8
+#define OMAP3430_RSTTIME2_MASK				(0x1f << 8)
+#define OMAP3430_RSTTIME1_SHIFT				0
+#define OMAP3430_RSTTIME1_MASK				(0xff << 0)
+
+/* PRM_RSTST */
+#define OMAP3430_ICECRUSHER_RST				(1 << 10)
+#define OMAP3430_ICEPICK_RST				(1 << 9)
+#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST		(1 << 8)
+#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST		(1 << 7)
+#define OMAP3430_EXTERNAL_WARM_RST			(1 << 6)
+#define OMAP3430_SECURE_WD_RST				(1 << 5)
+#define OMAP3430_MPU_WD_RST				(1 << 4)
+#define OMAP3430_SECURITY_VIOL_RST			(1 << 3)
+#define OMAP3430_GLOBAL_SW_RST				(1 << 1)
+#define OMAP3430_GLOBAL_COLD_RST			(1 << 0)
+
+/* PRM_VOLTCTRL */
+#define OMAP3430_SEL_VMODE				(1 << 4)
+#define OMAP3430_SEL_OFF				(1 << 3)
+#define OMAP3430_AUTO_OFF				(1 << 2)
+#define OMAP3430_AUTO_RET				(1 << 1)
+#define OMAP3430_AUTO_SLEEP				(1 << 0)
+
+/* PRM_SRAM_PCHARGE */
+#define OMAP3430_PCHARGE_TIME_SHIFT			0
+#define OMAP3430_PCHARGE_TIME_MASK			(0xff << 0)
+
+/* PRM_CLKSRC_CTRL */
+#define OMAP3430_SYSCLKDIV_SHIFT			6
+#define OMAP3430_SYSCLKDIV_MASK				(0x3 << 6)
+#define OMAP3430_AUTOEXTCLKMODE_SHIFT			3
+#define OMAP3430_AUTOEXTCLKMODE_MASK			(0x3 << 3)
+#define OMAP3430_SYSCLKSEL_SHIFT			0
+#define OMAP3430_SYSCLKSEL_MASK				(0x3 << 0)
+
+/* PRM_VOLTSETUP1 */
+#define OMAP3430_SETUP_TIME2_SHIFT			16
+#define OMAP3430_SETUP_TIME2_MASK			(0xffff << 16)
+#define OMAP3430_SETUP_TIME1_SHIFT			0
+#define OMAP3430_SETUP_TIME1_MASK			(0xffff << 0)
+
+/* PRM_VOLTOFFSET */
+#define OMAP3430_OFFSET_TIME_SHIFT			0
+#define OMAP3430_OFFSET_TIME_MASK			(0xffff << 0)
+
+/* PRM_CLKSETUP */
+#define OMAP3430_SETUP_TIME_SHIFT			0
+#define OMAP3430_SETUP_TIME_MASK			(0xffff << 0)
+
+/* PRM_POLCTRL */
+#define OMAP3430_OFFMODE_POL				(1 << 3)
+#define OMAP3430_CLKOUT_POL				(1 << 2)
+#define OMAP3430_CLKREQ_POL				(1 << 1)
+#define OMAP3430_EXTVOL_POL				(1 << 0)
+
+/* PRM_VOLTSETUP2 */
+#define OMAP3430_OFFMODESETUPTIME_SHIFT			0
+#define OMAP3430_OFFMODESETUPTIME_MASK			(0xffff << 0)
+
+/* PRM_VP1_CONFIG specific bits */
+
+/* PRM_VP1_VSTEPMIN specific bits */
+
+/* PRM_VP1_VSTEPMAX specific bits */
+
+/* PRM_VP1_VLIMITTO specific bits */
+
+/* PRM_VP1_VOLTAGE specific bits */
+
+/* PRM_VP1_STATUS specific bits */
+
+/* PRM_VP2_CONFIG specific bits */
+
+/* PRM_VP2_VSTEPMIN specific bits */
+
+/* PRM_VP2_VSTEPMAX specific bits */
+
+/* PRM_VP2_VLIMITTO specific bits */
+
+/* PRM_VP2_VOLTAGE specific bits */
+
+/* PRM_VP2_STATUS specific bits */
+
+/* RM_RSTST_NEON specific bits */
+
+/* PM_WKDEP_NEON specific bits */
+
+/* PM_PWSTCTRL_NEON specific bits */
+
+/* PM_PWSTST_NEON specific bits */
+
+/* PM_PREPWSTST_NEON specific bits */
+
+#endif
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
new file mode 100644
index 0000000..ab7649af
--- /dev/null
+++ b/arch/arm/mach-omap2/prm.h
@@ -0,0 +1,316 @@
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM_H
+#define __ARCH_ARM_MACH_OMAP2_PRM_H
+
+/*
+ * OMAP2/3 Power/Reset Management (PRM) register definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "prcm-common.h"
+
+#ifndef __ASSEMBLER__
+#define OMAP_PRM_REGADDR(module, reg)					\
+	(void __iomem *)IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg))
+#else
+#define OMAP2420_PRM_REGADDR(module, reg)				\
+			IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
+#define OMAP2430_PRM_REGADDR(module, reg)				\
+			IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
+#define OMAP34XX_PRM_REGADDR(module, reg)				\
+			IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
+#endif
+
+/*
+ * Architecture-specific global PRM registers
+ * Use prm_{read,write}_reg() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * PRCM_* on 24xx, and PRM_* on 34xx.  (The exceptions are the
+ * IRQSTATUS and IRQENABLE bits.)
+ *
+ */
+
+#define OMAP24XX_PRCM_REVISION		OMAP_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP24XX_PRCM_SYSCONFIG		OMAP_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP24XX_PRCM_IRQSTATUS_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP24XX_PRCM_IRQENABLE_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP24XX_PRCM_VOLTCTRL		OMAP_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP24XX_PRCM_VOLTST		OMAP_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP24XX_PRCM_CLKSRC_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP24XX_PRCM_CLKCFG_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP24XX_PRCM_CLKCFG_STATUS	OMAP_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP24XX_PRCM_VOLTSETUP		OMAP_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP24XX_PRCM_CLKSSETUP		OMAP_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP24XX_PRCM_POLCTRL		OMAP_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP3430_PRM_REVISION		OMAP_PRM_REGADDR(OCP_MOD, 0x0004)
+#define OMAP3430_PRM_SYSCONFIG		OMAP_PRM_REGADDR(OCP_MOD, 0x0014)
+
+#define OMAP3430_PRM_IRQSTATUS_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP3430_PRM_IRQENABLE_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
+
+
+#define OMAP3430_PRM_VC_SMPS_SA		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
+#define OMAP3430_PRM_VC_SMPS_VOL_RA	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
+#define OMAP3430_PRM_VC_SMPS_CMD_RA	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
+#define OMAP3430_PRM_VC_CMD_VAL_0	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
+#define OMAP3430_PRM_VC_CMD_VAL_1	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
+#define OMAP3430_PRM_VC_CH_CONF		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
+#define OMAP3430_PRM_VC_I2C_CFG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
+#define OMAP3430_PRM_VC_BYPASS_VAL	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
+#define OMAP3430_PRM_RSTCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
+#define OMAP3430_PRM_RSTTIME		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
+#define OMAP3430_PRM_RSTST		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
+#define OMAP3430_PRM_VOLTCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
+#define OMAP3430_PRM_SRAM_PCHARGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
+#define OMAP3430_PRM_CLKSRC_CTRL	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
+#define OMAP3430_PRM_VOLTSETUP1		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
+#define OMAP3430_PRM_VOLTOFFSET		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
+#define OMAP3430_PRM_CLKSETUP		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
+#define OMAP3430_PRM_POLCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
+#define OMAP3430_PRM_VOLTSETUP2		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
+#define OMAP3430_PRM_VP1_CONFIG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
+#define OMAP3430_PRM_VP1_VSTEPMIN	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
+#define OMAP3430_PRM_VP1_VSTEPMAX	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
+#define OMAP3430_PRM_VP1_VLIMITTO	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
+#define OMAP3430_PRM_VP1_VOLTAGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
+#define OMAP3430_PRM_VP1_STATUS		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
+#define OMAP3430_PRM_VP2_CONFIG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
+#define OMAP3430_PRM_VP2_VSTEPMIN	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
+#define OMAP3430_PRM_VP2_VSTEPMAX	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
+#define OMAP3430_PRM_VP2_VLIMITTO	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
+#define OMAP3430_PRM_VP2_VOLTAGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
+#define OMAP3430_PRM_VP2_STATUS		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
+
+#define OMAP3430_PRM_CLKSEL		OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
+#define OMAP3430_PRM_CLKOUT_CTRL	OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+
+/*
+ * Module specific PRM registers from PRM_BASE + domain offset
+ *
+ * Use prm_{read,write}_mod_reg() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * {PM,RM}_* on both architectures.  (The exceptions are the IRQSTATUS
+ * and IRQENABLE bits.)
+ *
+ */
+
+/* Registers appearing on both 24xx and 34xx */
+
+#define RM_RSTCTRL					0x0050
+#define RM_RSTTIME					0x0054
+#define RM_RSTST					0x0058
+
+#define PM_WKEN						0x00a0
+#define PM_WKEN1					PM_WKEN
+#define PM_WKST						0x00b0
+#define PM_WKST1					PM_WKST
+#define PM_WKDEP					0x00c8
+#define PM_EVGENCTRL					0x00d4
+#define PM_EVGENONTIM					0x00d8
+#define PM_EVGENOFFTIM					0x00dc
+#define PM_PWSTCTRL					0x00e0
+#define PM_PWSTST					0x00e4
+
+#define OMAP3430_PM_MPUGRPSEL				0x00a4
+#define OMAP3430_PM_MPUGRPSEL1				OMAP3430_PM_MPUGRPSEL
+
+#define OMAP3430_PM_IVAGRPSEL				0x00a8
+#define OMAP3430_PM_IVAGRPSEL1				OMAP3430_PM_IVAGRPSEL
+
+#define OMAP3430_PM_PREPWSTST				0x00e8
+
+#define OMAP3430_PRM_IRQSTATUS_IVA2			0x00f8
+#define OMAP3430_PRM_IRQENABLE_IVA2			0x00fc
+
+
+/* Architecture-specific registers */
+
+#define OMAP24XX_PM_WKEN2				0x00a4
+#define OMAP24XX_PM_WKST2				0x00b4
+
+#define OMAP24XX_PRCM_IRQSTATUS_DSP			0x00f0	/* IVA mod */
+#define OMAP24XX_PRCM_IRQENABLE_DSP			0x00f4	/* IVA mod */
+#define OMAP24XX_PRCM_IRQSTATUS_IVA			0x00f8
+#define OMAP24XX_PRCM_IRQENABLE_IVA			0x00fc
+
+#ifndef __ASSEMBLER__
+
+/* Power/reset management domain register get/set */
+
+static inline void prm_write_mod_reg(u32 val, s16 module, s16 idx)
+{
+	__raw_writel(val, OMAP_PRM_REGADDR(module, idx));
+}
+
+static inline u32 prm_read_mod_reg(s16 module, s16 idx)
+{
+	return __raw_readl(OMAP_PRM_REGADDR(module, idx));
+}
+
+#endif
+
+/*
+ * Bits common to specific registers
+ *
+ * The 3430 register and bit names are generally used,
+ * since they tend to make more sense
+ */
+
+/* PM_EVGENONTIM_MPU */
+/* Named PM_EVEGENONTIM_MPU on the 24XX */
+#define OMAP_ONTIMEVAL_SHIFT				0
+#define OMAP_ONTIMEVAL_MASK				(0xffffffff << 0)
+
+/* PM_EVGENOFFTIM_MPU */
+/* Named PM_EVEGENOFFTIM_MPU on the 24XX */
+#define OMAP_OFFTIMEVAL_SHIFT				0
+#define OMAP_OFFTIMEVAL_MASK				(0xffffffff << 0)
+
+/* PRM_CLKSETUP and PRCM_VOLTSETUP */
+/* Named PRCM_CLKSSETUP on the 24XX */
+#define OMAP_SETUP_TIME_SHIFT				0
+#define OMAP_SETUP_TIME_MASK				(0xffff << 0)
+
+/* PRM_CLKSRC_CTRL */
+/* Named PRCM_CLKSRC_CTRL on the 24XX */
+#define OMAP_SYSCLKDIV_SHIFT				6
+#define OMAP_SYSCLKDIV_MASK				(0x3 << 6)
+#define OMAP_AUTOEXTCLKMODE_SHIFT			3
+#define OMAP_AUTOEXTCLKMODE_MASK			(0x3 << 3)
+#define OMAP_SYSCLKSEL_SHIFT				0
+#define OMAP_SYSCLKSEL_MASK				(0x3 << 0)
+
+/* PM_EVGENCTRL_MPU */
+#define OMAP_OFFLOADMODE_SHIFT				3
+#define OMAP_OFFLOADMODE_MASK				(0x3 << 3)
+#define OMAP_ONLOADMODE_SHIFT				1
+#define OMAP_ONLOADMODE_MASK				(0x3 << 1)
+#define OMAP_ENABLE					(1 << 0)
+
+/* PRM_RSTTIME */
+/* Named RM_RSTTIME_WKUP on the 24xx */
+#define OMAP_RSTTIME2_SHIFT				8
+#define OMAP_RSTTIME2_MASK				(0x1f << 8)
+#define OMAP_RSTTIME1_SHIFT				0
+#define OMAP_RSTTIME1_MASK				(0xff << 0)
+
+
+/* PRM_RSTCTRL */
+/* Named RM_RSTCTRL_WKUP on the 24xx */
+/* 2420 calls RST_DPLL3 'RST_DPLL' */
+#define OMAP_RST_DPLL3					(1 << 2)
+#define OMAP_RST_GS					(1 << 1)
+
+
+/*
+ * Bits common to module-shared registers
+ *
+ * Not all registers of a particular type support all of these bits -
+ * check TRM if you are unsure
+ */
+
+/*
+ * 24XX: PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP
+ *
+ * 2430: PM_PWSTST_MDM
+ *
+ * 3430: PM_PWSTST_IVA2, PM_PWSTST_MPU, PM_PWSTST_CORE, PM_PWSTST_GFX,
+ *	 PM_PWSTST_DSS, PM_PWSTST_CAM, PM_PWSTST_PER, PM_PWSTST_EMU,
+ *	 PM_PWSTST_NEON
+ */
+#define OMAP_INTRANSITION				(1 << 20)
+
+
+/*
+ * 24XX: PM_PWSTST_GFX, PM_PWSTST_DSP
+ *
+ * 2430: PM_PWSTST_MDM
+ *
+ * 3430: PM_PWSTST_IVA2, PM_PWSTST_MPU, PM_PWSTST_CORE, PM_PWSTST_GFX,
+ *	 PM_PWSTST_DSS, PM_PWSTST_CAM, PM_PWSTST_PER, PM_PWSTST_EMU,
+ *	 PM_PWSTST_NEON
+ */
+#define OMAP_POWERSTATEST_SHIFT				0
+#define OMAP_POWERSTATEST_MASK				(0x3 << 0)
+
+/*
+ * 24XX: RM_RSTST_MPU and RM_RSTST_DSP - on 24XX, 'COREDOMAINWKUP_RST' is
+ *	 called 'COREWKUP_RST'
+ *
+ * 3430: RM_RSTST_IVA2, RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSS,
+ *	 RM_RSTST_CAM, RM_RSTST_PER, RM_RSTST_NEON
+ */
+#define OMAP_COREDOMAINWKUP_RST				(1 << 3)
+
+/*
+ * 24XX: RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSP
+ *
+ * 2430: RM_RSTST_MDM
+ *
+ * 3430: RM_RSTST_CORE, RM_RSTST_EMU
+ */
+#define OMAP_DOMAINWKUP_RST				(1 << 2)
+
+/*
+ * 24XX: RM_RSTST_MPU, RM_RSTST_WKUP, RM_RSTST_DSP
+ *	 On 24XX, 'GLOBALWARM_RST' is called 'GLOBALWMPU_RST'.
+ *
+ * 2430: RM_RSTST_MDM
+ *
+ * 3430: RM_RSTST_CORE, RM_RSTST_EMU
+ */
+#define OMAP_GLOBALWARM_RST				(1 << 1)
+#define OMAP_GLOBALCOLD_RST				(1 << 0)
+
+/*
+ * 24XX: PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_CORE, PM_WKDEP_DSP
+ *	 2420 TRM sometimes uses "EN_WAKEUP" instead of "EN_WKUP"
+ *
+ * 2430: PM_WKDEP_MDM
+ *
+ * 3430: PM_WKDEP_IVA2, PM_WKDEP_GFX, PM_WKDEP_DSS, PM_WKDEP_CAM,
+ *	 PM_WKDEP_PER
+ */
+#define OMAP_EN_WKUP					(1 << 4)
+
+/*
+ * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
+ *	 PM_PWSTCTRL_DSP
+ *
+ * 2430: PM_PWSTCTRL_MDM
+ *
+ * 3430: PM_PWSTCTRL_IVA2, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
+ *	 PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER,
+ *	 PM_PWSTCTRL_NEON
+ */
+#define OMAP_LOGICRETSTATE				(1 << 2)
+
+/*
+ * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
+ *       PM_PWSTCTRL_DSP, PM_PWSTST_MPU
+ *
+ * 2430: PM_PWSTCTRL_MDM shared bits
+ *
+ * 3430: PM_PWSTCTRL_IVA2, PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE,
+ *	 PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER,
+ *	 PM_PWSTCTRL_NEON shared bits
+ */
+#define OMAP_POWERSTATE_SHIFT				0
+#define OMAP_POWERSTATE_MASK				(0x3 << 0)
+
+
+#endif
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
new file mode 100644
index 0000000..d7f23bc
--- /dev/null
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -0,0 +1,58 @@
+#ifndef __ARCH_ARM_MACH_OMAP2_SDRC_H
+#define __ARCH_ARM_MACH_OMAP2_SDRC_H
+
+/*
+ * OMAP2 SDRC register definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <asm/arch/sdrc.h>
+
+#ifndef __ASSEMBLER__
+extern unsigned long omap2_sdrc_base;
+extern unsigned long omap2_sms_base;
+
+#define OMAP_SDRC_REGADDR(reg)						\
+		(void __iomem *)IO_ADDRESS(omap2_sdrc_base + (reg))
+#define OMAP_SMS_REGADDR(reg)						\
+		(void __iomem *)IO_ADDRESS(omap2_sms_base + (reg))
+
+/* SDRC global register get/set */
+
+static inline void sdrc_write_reg(u32 val, u16 reg)
+{
+	__raw_writel(val, OMAP_SDRC_REGADDR(reg));
+}
+
+static inline u32 sdrc_read_reg(u16 reg)
+{
+	return __raw_readl(OMAP_SDRC_REGADDR(reg));
+}
+
+/* SMS global register get/set */
+
+static inline void sms_write_reg(u32 val, u16 reg)
+{
+	__raw_writel(val, OMAP_SMS_REGADDR(reg));
+}
+
+static inline u32 sms_read_reg(u16 reg)
+{
+	return __raw_readl(OMAP_SMS_REGADDR(reg));
+}
+#else
+#define OMAP242X_SDRC_REGADDR(reg)	IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
+#define OMAP243X_SDRC_REGADDR(reg)	IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
+#define OMAP34XX_SDRC_REGADDR(reg)	IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
+#endif	/* __ASSEMBLER__ */
+
+#endif
diff --git a/arch/arm/mach-omap2/sleep.S b/arch/arm/mach-omap2/sleep.S
index 16247d5..46ccb9b 100644
--- a/arch/arm/mach-omap2/sleep.S
+++ b/arch/arm/mach-omap2/sleep.S
@@ -26,19 +26,10 @@
 #include <asm/arch/io.h>
 #include <asm/arch/pm.h>
 
-#define A_32KSYNC_CR_V		IO_ADDRESS(OMAP_TIMER32K_BASE+0x10)
-#define A_PRCM_VOLTCTRL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE+0x50)
-#define A_PRCM_CLKCFG_CTRL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE+0x80)
-#define A_CM_CLKEN_PLL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE+0x500)
-#define A_CM_IDLEST_CKGEN_V	IO_ADDRESS(OMAP24XX_PRCM_BASE+0x520)
-#define A_CM_CLKSEL1_PLL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE+0x540)
-#define A_CM_CLKSEL2_PLL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE+0x544)
+#include "sdrc.h"
 
-#define A_SDRC_DLLA_CTRL_V	IO_ADDRESS(OMAP24XX_SDRC_BASE+0x60)
-#define	A_SDRC_POWER_V		IO_ADDRESS(OMAP24XX_SDRC_BASE+0x70)
-#define A_SDRC_RFR_CTRL_V	IO_ADDRESS(OMAP24XX_SDRC_BASE+0xA4)
+/* First address of reserved address space?  apparently valid for OMAP2 & 3 */
 #define A_SDRC0_V		(0xC0000000)
-#define A_SDRC_MANUAL_V		IO_ADDRESS(OMAP24XX_SDRC_BASE+0xA8)
 
 	.text
 
@@ -126,17 +117,11 @@
 	ldmfd	sp!, {r0 - r12, pc}	@ restore regs and return
 
 A_SDRC_POWER:
-	.word A_SDRC_POWER_V
+	.word OMAP242X_SDRC_REGADDR(SDRC_POWER)
 A_SDRC0:
 	.word A_SDRC0_V
-A_CM_CLKSEL2_PLL_S:
-	.word A_CM_CLKSEL2_PLL_V
-A_CM_CLKEN_PLL:
-	.word A_CM_CLKEN_PLL_V
 A_SDRC_DLLA_CTRL_S:
-	.word A_SDRC_DLLA_CTRL_V
-A_SDRC_MANUAL_S:
-	.word A_SDRC_MANUAL_V
+	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 
 ENTRY(omap24xx_cpu_suspend_sz)
 	.word	. - omap24xx_cpu_suspend
diff --git a/arch/arm/mach-omap2/sram-fn.S b/arch/arm/mach-omap2/sram-fn.S
index b275766..4a9e491 100644
--- a/arch/arm/mach-omap2/sram-fn.S
+++ b/arch/arm/mach-omap2/sram-fn.S
@@ -27,19 +27,11 @@
 #include <asm/arch/io.h>
 #include <asm/hardware.h>
 
-#include "prcm-regs.h"
+#include "sdrc.h"
+#include "prm.h"
+#include "cm.h"
 
-#define TIMER_32KSYNCT_CR_V	IO_ADDRESS(OMAP24XX_32KSYNCT_BASE + 0x010)
-
-#define CM_CLKSEL2_PLL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x544)
-#define PRCM_VOLTCTRL_V		IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x050)
-#define PRCM_CLKCFG_CTRL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x080)
-#define CM_CLKEN_PLL_V		IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x500)
-#define CM_IDLEST_CKGEN_V	IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x520)
-#define CM_CLKSEL1_PLL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x540)
-
-#define SDRC_DLLA_CTRL_V	IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x060)
-#define SDRC_RFR_CTRL_V		IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x0a4)
+#define TIMER_32KSYNCT_CR_V	IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 
 	.text
 
@@ -131,11 +123,11 @@
 
 /* relative load constants */
 cm_clksel2_pll:
-	.word CM_CLKSEL2_PLL_V
+	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
 sdrc_dlla_ctrl:
-	.word SDRC_DLLA_CTRL_V
+	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 prcm_voltctrl:
-	.word PRCM_VOLTCTRL_V
+	.word OMAP2420_PRM_REGADDR(OCP_MOD, 0x50)
 prcm_mask_val:
 	.word 0xFFFF3FFC
 timer_32ksynct_cr:
@@ -225,13 +217,13 @@
 	mov	pc, lr			@ back to caller
 
 ddr_cm_clksel2_pll:
-	.word CM_CLKSEL2_PLL_V
+	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
 ddr_sdrc_dlla_ctrl:
-	.word SDRC_DLLA_CTRL_V
+	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 ddr_sdrc_rfr_ctrl:
-	.word SDRC_RFR_CTRL_V
+	.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
 ddr_prcm_voltctrl:
-	.word PRCM_VOLTCTRL_V
+	.word OMAP2420_PRM_REGADDR(OCP_MOD, 0x50)
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 ddr_timer_32ksynct:
@@ -316,17 +308,17 @@
 	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
 
 set_config:
-	.word PRCM_CLKCFG_CTRL_V
+	.word OMAP2420_PRM_REGADDR(OCP_MOD, 0x80)
 pll_ctl:
-	.word CM_CLKEN_PLL_V
+	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_FCLKEN1)
 pll_stat:
-	.word CM_IDLEST_CKGEN_V
+	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_IDLEST1)
 pll_div:
-	.word CM_CLKSEL1_PLL_V
+	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL)
 sdrc_rfr:
-	.word SDRC_RFR_CTRL_V
+	.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
 dlla_ctrl:
-	.word SDRC_DLLA_CTRL_V
+	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 
 ENTRY(sram_set_prcm_sz)
 	.word	. - sram_set_prcm
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 3234dee..78d05f2 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -3,6 +3,11 @@
  *
  * OMAP2 GP timer support.
  *
+ * Update to use new clocksource/clockevent layers
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * Original driver:
  * Copyright (C) 2005 Nokia Corporation
  * Author: Paul Mundt <paul.mundt@nokia.com>
  *         Juha Yrjölä <juha.yrjola@nokia.com>
@@ -25,24 +30,23 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/mach/time.h>
 #include <asm/arch/dmtimer.h>
 
 static struct omap_dm_timer *gptimer;
-
-static inline void omap2_gp_timer_start(unsigned long load_val)
-{
-	omap_dm_timer_set_load(gptimer, 1, 0xffffffff - load_val);
-	omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
-	omap_dm_timer_start(gptimer);
-}
+static struct clock_event_device clockevent_gpt;
 
 static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
 {
-	omap_dm_timer_write_status(gptimer, OMAP_TIMER_INT_OVERFLOW);
-	timer_tick();
+	struct omap_dm_timer *gpt = (struct omap_dm_timer *)dev_id;
+	struct clock_event_device *evt = &clockevent_gpt;
 
+	omap_dm_timer_write_status(gpt, OMAP_TIMER_INT_OVERFLOW);
+
+	evt->event_handler(evt);
 	return IRQ_HANDLED;
 }
 
@@ -52,20 +56,138 @@
 	.handler	= omap2_gp_timer_interrupt,
 };
 
-static void __init omap2_gp_timer_init(void)
+static int omap2_gp_timer_set_next_event(unsigned long cycles,
+					 struct clock_event_device *evt)
 {
-	u32 tick_period;
+	omap_dm_timer_set_load(gptimer, 0, 0xffffffff - cycles);
+	omap_dm_timer_start(gptimer);
 
-	omap_dm_timer_init();
+	return 0;
+}
+
+static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
+				    struct clock_event_device *evt)
+{
+	u32 period;
+
+	omap_dm_timer_stop(gptimer);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
+		period -= 1;
+
+		omap_dm_timer_set_load(gptimer, 1, 0xffffffff - period);
+		omap_dm_timer_start(gptimer);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static struct clock_event_device clockevent_gpt = {
+	.name		= "gp timer",
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.set_next_event	= omap2_gp_timer_set_next_event,
+	.set_mode	= omap2_gp_timer_set_mode,
+};
+
+static void __init omap2_gp_clockevent_init(void)
+{
+	u32 tick_rate;
+
 	gptimer = omap_dm_timer_request_specific(1);
 	BUG_ON(gptimer == NULL);
 
+#if defined(CONFIG_OMAP_32K_TIMER)
+	omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);
+#else
 	omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK);
-	tick_period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
-	tick_period -= 1;
+#endif
+	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
 
+	omap2_gp_timer_irq.dev_id = (void *)gptimer;
 	setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq);
-	omap2_gp_timer_start(tick_period);
+	omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
+
+	clockevent_gpt.mult = div_sc(tick_rate, NSEC_PER_SEC,
+				     clockevent_gpt.shift);
+	clockevent_gpt.max_delta_ns =
+		clockevent_delta2ns(0xffffffff, &clockevent_gpt);
+	clockevent_gpt.min_delta_ns =
+		clockevent_delta2ns(1, &clockevent_gpt);
+
+	clockevent_gpt.cpumask = cpumask_of_cpu(0);
+	clockevents_register_device(&clockevent_gpt);
+}
+
+#ifdef CONFIG_OMAP_32K_TIMER
+/* 
+ * When 32k-timer is enabled, don't use GPTimer for clocksource
+ * instead, just leave default clocksource which uses the 32k
+ * sync counter.  See clocksource setup in see plat-omap/common.c. 
+ */
+
+static inline void __init omap2_gp_clocksource_init(void) {}
+#else
+/*
+ * clocksource
+ */
+static struct omap_dm_timer *gpt_clocksource;
+static cycle_t clocksource_read_cycles(void)
+{
+	return (cycle_t)omap_dm_timer_read_counter(gpt_clocksource);
+}
+
+static struct clocksource clocksource_gpt = {
+	.name		= "gp timer",
+	.rating		= 300,
+	.read		= clocksource_read_cycles,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 24,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/* Setup free-running counter for clocksource */
+static void __init omap2_gp_clocksource_init(void)
+{
+	static struct omap_dm_timer *gpt;
+	u32 tick_rate, tick_period;
+	static char err1[] __initdata = KERN_ERR
+		"%s: failed to request dm-timer\n";
+	static char err2[] __initdata = KERN_ERR
+		"%s: can't register clocksource!\n";
+
+	gpt = omap_dm_timer_request();
+	if (!gpt)
+		printk(err1, clocksource_gpt.name);
+	gpt_clocksource = gpt;
+
+	omap_dm_timer_set_source(gpt, OMAP_TIMER_SRC_SYS_CLK);
+	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gpt));
+	tick_period = (tick_rate / HZ) - 1;
+
+	omap_dm_timer_set_load(gpt, 1, 0);
+	omap_dm_timer_start(gpt);
+
+	clocksource_gpt.mult =
+		clocksource_khz2mult(tick_rate/1000, clocksource_gpt.shift);
+	if (clocksource_register(&clocksource_gpt))
+		printk(err2, clocksource_gpt.name);
+}
+#endif
+
+static void __init omap2_gp_timer_init(void)
+{
+	omap_dm_timer_init();
+
+	omap2_gp_clockevent_init();
+	omap2_gp_clocksource_init();
 }
 
 struct sys_timer omap_timer = {
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 8f56c25..bc639a3 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -9,8 +9,6 @@
 obj-n :=
 obj-  :=
 
-obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
-
 # OCPI interconnect support for 1710, 1610 and 5912
 obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
 
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 0a60324..32a533b 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -304,6 +304,23 @@
 	}
 }
 
+/**
+ * recalculate_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ * Called at init.
+ */
+void recalculate_root_clocks(void)
+{
+	struct clk *clkp;
+
+	list_for_each_entry(clkp, &clocks, node) {
+		if (unlikely(!clkp->parent) && likely((u32)clkp->recalc))
+			clkp->recalc(clkp);
+	}
+}
+
 int clk_register(struct clk *clk)
 {
 	if (clk == NULL || IS_ERR(clk))
@@ -358,6 +375,30 @@
 }
 EXPORT_SYMBOL(clk_allow_idle);
 
+void clk_enable_init_clocks(void)
+{
+	struct clk *clkp;
+
+	list_for_each_entry(clkp, &clocks, node) {
+		if (clkp->flags & ENABLE_ON_INIT)
+			clk_enable(clkp);
+	}
+}
+EXPORT_SYMBOL(clk_enable_init_clocks);
+
+#ifdef CONFIG_CPU_FREQ
+void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (arch_clock->clk_init_cpufreq_table)
+		arch_clock->clk_init_cpufreq_table(table);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+}
+EXPORT_SYMBOL(clk_init_cpufreq_table);
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
@@ -396,3 +437,4 @@
 
 	return 0;
 }
+
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 4f0f9c4e..bd1cef2c 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -27,11 +27,16 @@
 #include <asm/setup.h>
 
 #include <asm/arch/board.h>
+#include <asm/arch/control.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/fpga.h>
 
 #include <asm/arch/clock.h>
 
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+# include "../mach-omap2/sdrc.h"
+#endif
+
 #define NO_LENGTH_CHECK 0xffffffff
 
 unsigned char omap_bootloader_tag[512];
@@ -171,8 +176,8 @@
 
 #if defined(CONFIG_ARCH_OMAP16XX)
 #define TIMER_32K_SYNCHRONIZED		0xfffbc410
-#elif defined(CONFIG_ARCH_OMAP24XX)
-#define TIMER_32K_SYNCHRONIZED		(OMAP24XX_32KSYNCT_BASE + 0x10)
+#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#define TIMER_32K_SYNCHRONIZED		(OMAP2_32KSYNCT_BASE + 0x10)
 #endif
 
 #ifdef	TIMER_32K_SYNCHRONIZED
@@ -193,12 +198,35 @@
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+/*
+ * Rounds down to nearest nsec.
+ */
+unsigned long long omap_32k_ticks_to_nsecs(unsigned long ticks_32k)
+{
+	return cyc2ns(&clocksource_32k, ticks_32k);
+}
+
+/*
+ * Returns current time from boot in nsecs. It's OK for this to wrap
+ * around for now, as it's just a relative time stamp.
+ */
+unsigned long long sched_clock(void)
+{
+	return omap_32k_ticks_to_nsecs(omap_32k_read());
+}
+
 static int __init omap_init_clocksource_32k(void)
 {
 	static char err[] __initdata = KERN_ERR
 			"%s: can't register clocksource!\n";
 
-	if (cpu_is_omap16xx() || cpu_is_omap24xx()) {
+	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
+		struct clk *sync_32k_ick;
+
+		sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
+		if (sync_32k_ick)
+			clk_enable(sync_32k_ick);
+
 		clocksource_32k.mult = clocksource_hz2mult(32768,
 					    clocksource_32k.shift);
 
@@ -210,3 +238,33 @@
 arch_initcall(omap_init_clocksource_32k);
 
 #endif	/* TIMER_32K_SYNCHRONIZED */
+
+/* Global address base setup code */
+
+#if defined(CONFIG_ARCH_OMAP2420)
+void __init omap2_set_globals_242x(void)
+{
+	omap2_sdrc_base = OMAP2420_SDRC_BASE;
+	omap2_sms_base = OMAP2420_SMS_BASE;
+	omap_ctrl_base_set(OMAP2420_CTRL_BASE);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2430)
+void __init omap2_set_globals_243x(void)
+{
+	omap2_sdrc_base = OMAP243X_SDRC_BASE;
+	omap2_sms_base = OMAP243X_SMS_BASE;
+	omap_ctrl_base_set(OMAP243X_CTRL_BASE);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3430)
+void __init omap2_set_globals_343x(void)
+{
+	omap2_sdrc_base = OMAP343X_SDRC_BASE;
+	omap2_sms_base = OMAP343X_SMS_BASE;
+	omap_ctrl_base_set(OMAP343X_CTRL_BASE);
+}
+#endif
+
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 8c78e4e..1903a34 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -136,7 +136,6 @@
 	u16 irq;
 	u16 virtual_irq_start;
 	int method;
-	u32 reserved_map;
 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	u32 suspend_wakeup;
 	u32 saved_wakeup;
@@ -149,7 +148,9 @@
 	u32 saved_fallingdetect;
 	u32 saved_risingdetect;
 #endif
+	u32 level_mask;
 	spinlock_t lock;
+	struct gpio_chip chip;
 };
 
 #define METHOD_MPUIO		0
@@ -538,10 +539,9 @@
 			bank->enabled_non_wakeup_gpios &= ~gpio_bit;
 	}
 
-	/*
-	 * FIXME: Possibly do 'set_irq_handler(j, handle_level_irq)' if only
-	 * level triggering requested.
-	 */
+	bank->level_mask =
+		__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
+		__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 }
 #endif
 
@@ -652,6 +652,12 @@
 		irq_desc[irq].status |= type;
 	}
 	spin_unlock_irqrestore(&bank->lock, flags);
+
+	if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+		__set_irq_handler_unlocked(irq, handle_level_irq);
+	else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		__set_irq_handler_unlocked(irq, handle_edge_irq);
+
 	return retval;
 }
 
@@ -903,19 +909,17 @@
 {
 	struct gpio_bank *bank;
 	unsigned long flags;
+	int status;
 
 	if (check_gpio(gpio) < 0)
 		return -EINVAL;
 
+	status = gpio_request(gpio, NULL);
+	if (status < 0)
+		return status;
+
 	bank = get_gpio_bank(gpio);
 	spin_lock_irqsave(&bank->lock, flags);
-	if (unlikely(bank->reserved_map & (1 << get_gpio_index(gpio)))) {
-		printk(KERN_ERR "omap-gpio: GPIO %d is already reserved!\n", gpio);
-		dump_stack();
-		spin_unlock_irqrestore(&bank->lock, flags);
-		return -1;
-	}
-	bank->reserved_map |= (1 << get_gpio_index(gpio));
 
 	/* Set trigger to none. You need to enable the desired trigger with
 	 * request_irq() or set_irq_type().
@@ -945,10 +949,11 @@
 		return;
 	bank = get_gpio_bank(gpio);
 	spin_lock_irqsave(&bank->lock, flags);
-	if (unlikely(!(bank->reserved_map & (1 << get_gpio_index(gpio))))) {
+	if (unlikely(!gpiochip_is_requested(&bank->chip,
+				get_gpio_index(gpio)))) {
+		spin_unlock_irqrestore(&bank->lock, flags);
 		printk(KERN_ERR "omap-gpio: GPIO %d wasn't reserved!\n", gpio);
 		dump_stack();
-		spin_unlock_irqrestore(&bank->lock, flags);
 		return;
 	}
 #ifdef CONFIG_ARCH_OMAP16XX
@@ -965,9 +970,9 @@
 		__raw_writel(1 << get_gpio_index(gpio), reg);
 	}
 #endif
-	bank->reserved_map &= ~(1 << get_gpio_index(gpio));
 	_reset_gpio(bank, gpio);
 	spin_unlock_irqrestore(&bank->lock, flags);
+	gpio_free(gpio);
 }
 
 /*
@@ -1022,12 +1027,7 @@
 			isr &= 0x0000ffff;
 
 		if (cpu_class_is_omap2()) {
-			level_mask =
-				__raw_readl(bank->base +
-					OMAP24XX_GPIO_LEVELDETECT0) |
-				__raw_readl(bank->base +
-					OMAP24XX_GPIO_LEVELDETECT1);
-			level_mask &= enabled;
+			level_mask = bank->level_mask & enabled;
 		}
 
 		/* clear edge sensitive interrupts before handler(s) are
@@ -1052,51 +1052,13 @@
 		gpio_irq = bank->virtual_irq_start;
 		for (; isr != 0; isr >>= 1, gpio_irq++) {
 			struct irq_desc *d;
-			int irq_mask;
+
 			if (!(isr & 1))
 				continue;
 			d = irq_desc + gpio_irq;
-			/* Don't run the handler if it's already running
-			 * or was disabled lazely.
-			 */
-			if (unlikely((d->depth ||
-				      (d->status & IRQ_INPROGRESS)))) {
-				irq_mask = 1 <<
-					(gpio_irq - bank->virtual_irq_start);
-				/* The unmasking will be done by
-				 * enable_irq in case it is disabled or
-				 * after returning from the handler if
-				 * it's already running.
-				 */
-				_enable_gpio_irqbank(bank, irq_mask, 0);
-				if (!d->depth) {
-					/* Level triggered interrupts
-					 * won't ever be reentered
-					 */
-					BUG_ON(level_mask & irq_mask);
-					d->status |= IRQ_PENDING;
-				}
-				continue;
-			}
 
 			desc_handle_irq(gpio_irq, d);
-
-			if (unlikely((d->status & IRQ_PENDING) && !d->depth)) {
-				irq_mask = 1 <<
-					(gpio_irq - bank->virtual_irq_start);
-				d->status &= ~IRQ_PENDING;
-				_enable_gpio_irqbank(bank, irq_mask, 1);
-				retrigger |= irq_mask;
-			}
 		}
-
-		if (cpu_class_is_omap2()) {
-			/* clear level sensitive interrupts after handler(s) */
-			_enable_gpio_irqbank(bank, isr_saved & level_mask, 0);
-			_clear_gpio_irqbank(bank, isr_saved & level_mask);
-			_enable_gpio_irqbank(bank, isr_saved & level_mask, 1);
-		}
-
 	}
 	/* if bank has any level sensitive GPIO pin interrupt
 	configured, we must unmask the bank interrupt only after
@@ -1135,6 +1097,14 @@
 {
 	unsigned int gpio = irq - IH_GPIO_BASE;
 	struct gpio_bank *bank = get_irq_chip_data(irq);
+	unsigned int irq_mask = 1 << get_gpio_index(gpio);
+
+	/* For level-triggered GPIOs, the clearing must be done after
+	 * the HW source is cleared, thus after the handler has run */
+	if (bank->level_mask & irq_mask) {
+		_set_gpio_irqenable(bank, gpio, 0);
+		_clear_gpio_irqstatus(bank, gpio);
+	}
 
 	_set_gpio_irqenable(bank, gpio, 1);
 }
@@ -1266,6 +1236,53 @@
 
 /*---------------------------------------------------------------------*/
 
+/* REVISIT these are stupid implementations!  replace by ones that
+ * don't switch on METHOD_* and which mostly avoid spinlocks
+ */
+
+static int gpio_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	spin_lock_irqsave(&bank->lock, flags);
+	_set_gpio_direction(bank, offset, 1);
+	spin_unlock_irqrestore(&bank->lock, flags);
+	return 0;
+}
+
+static int gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	return omap_get_gpio_datain(chip->base + offset);
+}
+
+static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	spin_lock_irqsave(&bank->lock, flags);
+	_set_gpio_dataout(bank, offset, value);
+	_set_gpio_direction(bank, offset, 0);
+	spin_unlock_irqrestore(&bank->lock, flags);
+	return 0;
+}
+
+static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	spin_lock_irqsave(&bank->lock, flags);
+	_set_gpio_dataout(bank, offset, value);
+	spin_unlock_irqrestore(&bank->lock, flags);
+}
+
+/*---------------------------------------------------------------------*/
+
 static int initialized;
 #if !defined(CONFIG_ARCH_OMAP3)
 static struct clk * gpio_ick;
@@ -1293,6 +1310,7 @@
 static int __init _omap_gpio_init(void)
 {
 	int i;
+	int gpio = 0;
 	struct gpio_bank *bank;
 #if defined(CONFIG_ARCH_OMAP3)
 	char clk_name[11];
@@ -1423,7 +1441,6 @@
 		int j, gpio_count = 16;
 
 		bank = &gpio_bank[i];
-		bank->reserved_map = 0;
 		bank->base = IO_ADDRESS(bank->base);
 		spin_lock_init(&bank->lock);
 		if (bank_is_mpuio(bank))
@@ -1461,6 +1478,26 @@
 			gpio_count = 32;
 		}
 #endif
+
+		/* REVISIT eventually switch from OMAP-specific gpio structs
+		 * over to the generic ones
+		 */
+		bank->chip.direction_input = gpio_input;
+		bank->chip.get = gpio_get;
+		bank->chip.direction_output = gpio_output;
+		bank->chip.set = gpio_set;
+		if (bank_is_mpuio(bank)) {
+			bank->chip.label = "mpuio";
+			bank->chip.base = OMAP_MPUIO(0);
+		} else {
+			bank->chip.label = "gpio";
+			bank->chip.base = gpio;
+			gpio += gpio_count;
+		}
+		bank->chip.ngpio = gpio_count;
+
+		gpiochip_add(&bank->chip);
+
 		for (j = bank->virtual_irq_start;
 		     j < bank->virtual_irq_start + gpio_count; j++) {
 			lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class);
@@ -1757,8 +1794,10 @@
 
 		for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {
 			unsigned	irq, value, is_in, irqstat;
+			const char	*label;
 
-			if (!(bank->reserved_map & mask))
+			label = gpiochip_is_requested(&bank->chip, j);
+			if (!label)
 				continue;
 
 			irq = bank->virtual_irq_start + j;
@@ -1766,13 +1805,16 @@
 			is_in = gpio_is_input(bank, mask);
 
 			if (bank_is_mpuio(bank))
-				seq_printf(s, "MPUIO %2d: ", j);
+				seq_printf(s, "MPUIO %2d ", j);
 			else
-				seq_printf(s, "GPIO %3d: ", gpio);
-			seq_printf(s, "%s %s",
+				seq_printf(s, "GPIO %3d ", gpio);
+			seq_printf(s, "(%10s): %s %s",
+					label,
 					is_in ? "in " : "out",
 					value ? "hi"  : "lo");
 
+/* FIXME for at least omap2, show pullup/pulldown state */
+
 			irqstat = irq_desc[irq].status;
 			if (is_in && ((bank->suspend_wakeup & mask)
 					|| irqstat & IRQ_TYPE_SENSE_MASK)) {
@@ -1795,10 +1837,10 @@
 					trigger = "high";
 					break;
 				case IRQ_TYPE_NONE:
-					trigger = "(unspecified)";
+					trigger = "(?)";
 					break;
 				}
-				seq_printf(s, ", irq-%d %s%s",
+				seq_printf(s, ", irq-%d %-8s%s",
 						irq, trigger,
 						(bank->suspend_wakeup & mask)
 							? " wakeup" : "");
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 75211f2..6f3f459 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -3,9 +3,9 @@
  *
  * Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h
  *
- * Copyright (C) 2003 - 2005 Nokia Corporation
+ * Copyright (C) 2003 - 2008 Nokia Corporation
  *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ * Written by Tony Lindgren
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -32,21 +32,17 @@
 
 #ifdef CONFIG_OMAP_MUX
 
-#define OMAP24XX_L4_BASE	0x48000000
-#define OMAP24XX_PULL_ENA	(1 << 3)
-#define OMAP24XX_PULL_UP	(1 << 4)
+static struct omap_mux_cfg *mux_cfg;
 
-static struct pin_config * pin_table;
-static unsigned long pin_table_sz;
-
-extern struct pin_config * omap730_pins;
-extern struct pin_config * omap1xxx_pins;
-extern struct pin_config * omap24xx_pins;
-
-int __init omap_mux_register(struct pin_config * pins, unsigned long size)
+int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg)
 {
-	pin_table = pins;
-	pin_table_sz = size;
+	if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size == 0
+			|| !arch_mux_cfg->cfg_reg) {
+		printk(KERN_ERR "Invalid pin table\n");
+		return -EINVAL;
+	}
+
+	mux_cfg = arch_mux_cfg;
 
 	return 0;
 }
@@ -56,152 +52,26 @@
  */
 int __init_or_module omap_cfg_reg(const unsigned long index)
 {
-	static DEFINE_SPINLOCK(mux_spin_lock);
+	struct pin_config *reg;
 
-	unsigned long flags;
-	struct pin_config *cfg;
-	unsigned int reg_orig = 0, reg = 0, pu_pd_orig = 0, pu_pd = 0,
-		pull_orig = 0, pull = 0;
-	unsigned int mask, warn = 0;
+	if (mux_cfg == NULL) {
+		printk(KERN_ERR "Pin mux table not initialized\n");
+		return -ENODEV;
+	}
 
-	if (!pin_table)
-		BUG();
-
-	if (index >= pin_table_sz) {
+	if (index >= mux_cfg->size) {
 		printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
-		       index, pin_table_sz);
+		       index, mux_cfg->size);
 		dump_stack();
 		return -ENODEV;
 	}
 
-	cfg = (struct pin_config *)&pin_table[index];
-	if (cpu_is_omap24xx()) {
-		u8 reg = 0;
+	reg = (struct pin_config *)&mux_cfg->pins[index];
 
-		reg |= cfg->mask & 0x7;
-		if (cfg->pull_val)
-			reg |= OMAP24XX_PULL_ENA;
-		if(cfg->pu_pd_val)
-			reg |= OMAP24XX_PULL_UP;
-#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
-		{
-			u8 orig = omap_readb(OMAP24XX_L4_BASE + cfg->mux_reg);
-			u8 debug = 0;
+	if (!mux_cfg->cfg_reg)
+		return -ENODEV;
 
-#ifdef	CONFIG_OMAP_MUX_DEBUG
-			debug = cfg->debug;
-#endif
-			warn = (orig != reg);
-			if (debug || warn)
-				printk("MUX: setup %s (0x%08x): 0x%02x -> 0x%02x\n",
-						cfg->name,
-						OMAP24XX_L4_BASE + cfg->mux_reg,
-						orig, reg);
-		}
-#endif
-		omap_writeb(reg, OMAP24XX_L4_BASE + cfg->mux_reg);
-
-		return 0;
-	}
-
-	/* Check the mux register in question */
-	if (cfg->mux_reg) {
-		unsigned	tmp1, tmp2;
-
-		spin_lock_irqsave(&mux_spin_lock, flags);
-		reg_orig = omap_readl(cfg->mux_reg);
-
-		/* The mux registers always seem to be 3 bits long */
-		mask = (0x7 << cfg->mask_offset);
-		tmp1 = reg_orig & mask;
-		reg = reg_orig & ~mask;
-
-		tmp2 = (cfg->mask << cfg->mask_offset);
-		reg |= tmp2;
-
-		if (tmp1 != tmp2)
-			warn = 1;
-
-		omap_writel(reg, cfg->mux_reg);
-		spin_unlock_irqrestore(&mux_spin_lock, flags);
-	}
-
-	/* Check for pull up or pull down selection on 1610 */
-	if (!cpu_is_omap15xx()) {
-		if (cfg->pu_pd_reg && cfg->pull_val) {
-			spin_lock_irqsave(&mux_spin_lock, flags);
-			pu_pd_orig = omap_readl(cfg->pu_pd_reg);
-			mask = 1 << cfg->pull_bit;
-
-			if (cfg->pu_pd_val) {
-				if (!(pu_pd_orig & mask))
-					warn = 1;
-				/* Use pull up */
-				pu_pd = pu_pd_orig | mask;
-			} else {
-				if (pu_pd_orig & mask)
-					warn = 1;
-				/* Use pull down */
-				pu_pd = pu_pd_orig & ~mask;
-			}
-			omap_writel(pu_pd, cfg->pu_pd_reg);
-			spin_unlock_irqrestore(&mux_spin_lock, flags);
-		}
-	}
-
-	/* Check for an associated pull down register */
-	if (cfg->pull_reg) {
-		spin_lock_irqsave(&mux_spin_lock, flags);
-		pull_orig = omap_readl(cfg->pull_reg);
-		mask = 1 << cfg->pull_bit;
-
-		if (cfg->pull_val) {
-			if (pull_orig & mask)
-				warn = 1;
-			/* Low bit = pull enabled */
-			pull = pull_orig & ~mask;
-		} else {
-			if (!(pull_orig & mask))
-				warn = 1;
-			/* High bit = pull disabled */
-			pull = pull_orig | mask;
-		}
-
-		omap_writel(pull, cfg->pull_reg);
-		spin_unlock_irqrestore(&mux_spin_lock, flags);
-	}
-
-	if (warn) {
-#ifdef CONFIG_OMAP_MUX_WARNINGS
-		printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
-#endif
-	}
-
-#ifdef CONFIG_OMAP_MUX_DEBUG
-	if (cfg->debug || warn) {
-		printk("MUX: Setting register %s\n", cfg->name);
-		printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
-		       cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
-
-		if (!cpu_is_omap15xx()) {
-			if (cfg->pu_pd_reg && cfg->pull_val) {
-				printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
-				       cfg->pu_pd_name, cfg->pu_pd_reg,
-				       pu_pd_orig, pu_pd);
-			}
-		}
-
-		if (cfg->pull_reg)
-			printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
-			       cfg->pull_name, cfg->pull_reg, pull_orig, pull);
-	}
-#endif
-
-#ifdef CONFIG_OMAP_MUX_ERRORS
-	return warn ? -ETXTBSY : 0;
-#else
-	return 0;
-#endif
+	return mux_cfg->cfg_reg(reg);
 }
 EXPORT_SYMBOL(omap_cfg_reg);
 #else
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index a5aedf9..a619475 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -33,6 +33,7 @@
 #include <asm/system.h>
 #include <asm/hardware.h>
 
+#include <asm/arch/control.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/usb.h>
 #include <asm/arch/board.h>
@@ -76,7 +77,7 @@
 
 /*-------------------------------------------------------------------------*/
 
-#ifdef	CONFIG_ARCH_OMAP_OTG
+#if	defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_USB_MUSB_OTG)
 
 static struct otg_transceiver *xceiv;
 
@@ -110,12 +111,48 @@
 
 #if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP15XX)
 
+static void omap2_usb_devconf_clear(u8 port, u32 mask)
+{
+	u32 r;
+
+	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	r &= ~USBTXWRMODEI(port, mask);
+	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
+}
+
+static void omap2_usb_devconf_set(u8 port, u32 mask)
+{
+	u32 r;
+
+	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	r |= USBTXWRMODEI(port, mask);
+	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
+}
+
+static void omap2_usb2_disable_5pinbitll(void)
+{
+	u32 r;
+
+	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	r &= ~(USBTXWRMODEI(2, USB_BIDIR_TLL) | USBT2TLL5PI);
+	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
+}
+
+static void omap2_usb2_enable_5pinunitll(void)
+{
+	u32 r;
+
+	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	r |= USBTXWRMODEI(2, USB_UNIDIR_TLL) | USBT2TLL5PI;
+	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
+}
+
 static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 {
 	u32	syscon1 = 0;
 
 	if (cpu_is_omap24xx())
-		CONTROL_DEVCONF_REG &= ~USBT0WRMODEI(USB_BIDIR_TLL);
+		omap2_usb_devconf_clear(0, USB_BIDIR_TLL);
 
 	if (nwires == 0) {
 		if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
@@ -187,19 +224,19 @@
 	case 3:
 		syscon1 = 2;
 		if (cpu_is_omap24xx())
-			CONTROL_DEVCONF_REG |= USBT0WRMODEI(USB_BIDIR);
+			omap2_usb_devconf_set(0, USB_BIDIR);
 		break;
 	case 4:
 		syscon1 = 1;
 		if (cpu_is_omap24xx())
-			CONTROL_DEVCONF_REG |= USBT0WRMODEI(USB_BIDIR);
+			omap2_usb_devconf_set(0, USB_BIDIR);
 		break;
 	case 6:
 		syscon1 = 3;
 		if (cpu_is_omap24xx()) {
 			omap_cfg_reg(J19_24XX_USB0_VP);
 			omap_cfg_reg(K20_24XX_USB0_VM);
-			CONTROL_DEVCONF_REG |= USBT0WRMODEI(USB_UNIDIR);
+			omap2_usb_devconf_set(0, USB_UNIDIR);
 		} else {
 			omap_cfg_reg(AA9_USB0_VP);
 			omap_cfg_reg(R9_USB0_VM);
@@ -220,7 +257,7 @@
 	if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6)
 		USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB1_UNI_R;
 	if (cpu_is_omap24xx())
-		CONTROL_DEVCONF_REG &= ~USBT1WRMODEI(USB_BIDIR_TLL);
+		omap2_usb_devconf_clear(1, USB_BIDIR_TLL);
 
 	if (nwires == 0)
 		return 0;
@@ -261,17 +298,17 @@
 		 * this TLL link is not using DP/DM
 		 */
 		syscon1 = 1;
-		CONTROL_DEVCONF_REG |= USBT1WRMODEI(USB_BIDIR_TLL);
+		omap2_usb_devconf_set(1, USB_BIDIR_TLL);
 		break;
 	case 3:
 		syscon1 = 2;
 		if (cpu_is_omap24xx())
-			CONTROL_DEVCONF_REG |= USBT1WRMODEI(USB_BIDIR);
+			omap2_usb_devconf_set(1, USB_BIDIR);
 		break;
 	case 4:
 		syscon1 = 1;
 		if (cpu_is_omap24xx())
-			CONTROL_DEVCONF_REG |= USBT1WRMODEI(USB_BIDIR);
+			omap2_usb_devconf_set(1, USB_BIDIR);
 		break;
 	case 6:
 		if (cpu_is_omap24xx())
@@ -295,8 +332,7 @@
 	u32	syscon1 = 0;
 
 	if (cpu_is_omap24xx()) {
-		CONTROL_DEVCONF_REG &= ~(USBT2WRMODEI(USB_BIDIR_TLL)
-					| USBT2TLL5PI);
+		omap2_usb2_disable_5pinbitll();
 		alt_pingroup = 0;
 	}
 
@@ -343,17 +379,17 @@
 		 * this TLL link is not using DP/DM
 		 */
 		syscon1 = 1;
-		CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_BIDIR_TLL);
+		omap2_usb_devconf_set(2, USB_BIDIR_TLL);
 		break;
 	case 3:
 		syscon1 = 2;
 		if (cpu_is_omap24xx())
-			CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_BIDIR);
+			omap2_usb_devconf_set(2, USB_BIDIR);
 		break;
 	case 4:
 		syscon1 = 1;
 		if (cpu_is_omap24xx())
-			CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_BIDIR);
+			omap2_usb_devconf_set(2, USB_BIDIR);
 		break;
 	case 5:
 		if (!cpu_is_omap24xx())
@@ -364,8 +400,7 @@
 		 * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED}
 		 */
 		syscon1 = 3;
-		CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_UNIDIR_TLL)
-					| USBT2TLL5PI;
+		omap2_usb2_enable_5pinunitll();
 		break;
 	case 6:
 		if (cpu_is_omap24xx())
diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
index e66a07a..2687b73 100644
--- a/arch/avr32/kernel/setup.c
+++ b/arch/avr32/kernel/setup.c
@@ -163,6 +163,7 @@
 	new->start = start;
 	new->end = end;
 	new->name = name;
+	new->sibling = next;
 	new->flags = IORESOURCE_MEM;
 
 	*pprev = new;
diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
index cf6f686..b835c4c 100644
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@@ -178,6 +178,7 @@
 	return 0;
 }
 
+#ifdef CONFIG_BUG
 int is_valid_bugaddr(unsigned long pc)
 {
 	unsigned short opcode;
@@ -189,6 +190,7 @@
 
 	return opcode == AVR32_BUG_OPCODE;
 }
+#endif
 
 asmlinkage void do_illegal_opcode(unsigned long ecr, struct pt_regs *regs)
 {
@@ -197,6 +199,7 @@
 	void __user *pc;
 	long code;
 
+#ifdef CONFIG_BUG
 	if (!user_mode(regs) && (ecr == ECR_ILLEGAL_OPCODE)) {
 		enum bug_trap_type type;
 
@@ -211,6 +214,7 @@
 			die("Kernel BUG", regs, SIGKILL);
 		}
 	}
+#endif
 
 	local_irq_enable();
 
diff --git a/arch/frv/kernel/entry-table.S b/arch/frv/kernel/entry-table.S
index d3b9253..bf35f33 100644
--- a/arch/frv/kernel/entry-table.S
+++ b/arch/frv/kernel/entry-table.S
@@ -316,8 +316,14 @@
 	.section	.trap.vector
 	.org		TBR_TT_TRAP0 >> 2
 	.long		system_call
-	.rept		126
+	.rept		119
 	.long		__entry_unsupported_trap
 	.endr
+
+	# userspace atomic op emulation, traps 120-126
+	.rept		7
+	.long		__entry_atomic_op
+	.endr
+	
 	.org		TBR_TT_BREAK >> 2
 	.long		__entry_debug_exception
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index f36d7f4..b8a4b94 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -656,6 +656,26 @@
 
 ###############################################################################
 #
+# handle atomic operation emulation for userspace
+#
+###############################################################################
+	.globl		__entry_atomic_op
+__entry_atomic_op:
+	LEDS		0x6012
+	sethi.p		%hi(atomic_operation),gr5
+	setlo		%lo(atomic_operation),gr5
+	movsg		esfr1,gr8
+	movsg		epcr0,gr9
+	movsg		esr0,gr10
+
+	# now that we've accessed the exception regs, we can enable exceptions
+	movsg		psr,gr4
+	ori		gr4,#PSR_ET,gr4
+	movgs		gr4,psr
+	jmpl		@(gr5,gr0)	; call atomic_operation(esfr1,epcr0,esr0)
+
+###############################################################################
+#
 # handle media exception
 #
 ###############################################################################
diff --git a/arch/frv/kernel/head.inc b/arch/frv/kernel/head.inc
index d424cd2..bff6662 100644
--- a/arch/frv/kernel/head.inc
+++ b/arch/frv/kernel/head.inc
@@ -46,5 +46,5 @@
 #ifdef CONFIG_MMU
 __sdram_base = 0x00000000		/* base address to which SDRAM relocated */
 #else
-__sdram_base = 0xc0000000		/* base address to which SDRAM relocated */
+__sdram_base = __page_offset		/* base address to which SDRAM relocated */
 #endif
diff --git a/arch/frv/kernel/switch_to.S b/arch/frv/kernel/switch_to.S
index b5275fa..b066686 100644
--- a/arch/frv/kernel/switch_to.S
+++ b/arch/frv/kernel/switch_to.S
@@ -102,13 +102,6 @@
 	movgs		gr14,lr
 	bar
 
-	srli		gr15,#28,gr5
-	subicc		gr5,#0xc,gr0,icc0
-	beq		icc0,#0,111f
-	break
-	nop
-111:
-
 	# jump to __switch_back or ret_from_fork as appropriate
 	# - move prev to GR8
 	movgs		gr4,psr
diff --git a/arch/frv/kernel/traps.c b/arch/frv/kernel/traps.c
index 2e6098c..2f7e668 100644
--- a/arch/frv/kernel/traps.c
+++ b/arch/frv/kernel/traps.c
@@ -102,6 +102,233 @@
 
 /*****************************************************************************/
 /*
+ * handle atomic operations with errors
+ * - arguments in gr8, gr9, gr10
+ * - original memory value placed in gr5
+ * - replacement memory value placed in gr9
+ */
+asmlinkage void atomic_operation(unsigned long esfr1, unsigned long epcr0,
+				 unsigned long esr0)
+{
+	static DEFINE_SPINLOCK(atomic_op_lock);
+	unsigned long x, y, z, *p;
+	mm_segment_t oldfs;
+	siginfo_t info;
+	int ret;
+
+	y = 0;
+	z = 0;
+
+	oldfs = get_fs();
+	if (!user_mode(__frame))
+		set_fs(KERNEL_DS);
+
+	switch (__frame->tbr & TBR_TT) {
+		/* TIRA gr0,#120
+		 * u32 __atomic_user_cmpxchg32(u32 *ptr, u32 test, u32 new)
+		 */
+	case TBR_TT_ATOMIC_CMPXCHG32:
+		p = (unsigned long *) __frame->gr8;
+		x = __frame->gr9;
+		y = __frame->gr10;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			if (z != x)
+				goto done;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				if (z != x)
+					goto done2;
+
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#121
+		 * u32 __atomic_kernel_xchg32(void *v, u32 new)
+		 */
+	case TBR_TT_ATOMIC_XCHG32:
+		p = (unsigned long *) __frame->gr8;
+		y = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#122
+		 * ulong __atomic_kernel_XOR_return(ulong i, ulong *v)
+		 */
+	case TBR_TT_ATOMIC_XOR:
+		p = (unsigned long *) __frame->gr8;
+		x = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				y = x ^ z;
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#123
+		 * ulong __atomic_kernel_OR_return(ulong i, ulong *v)
+		 */
+	case TBR_TT_ATOMIC_OR:
+		p = (unsigned long *) __frame->gr8;
+		x = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				y = x ^ z;
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#124
+		 * ulong __atomic_kernel_AND_return(ulong i, ulong *v)
+		 */
+	case TBR_TT_ATOMIC_AND:
+		p = (unsigned long *) __frame->gr8;
+		x = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				y = x & z;
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#125
+		 * int __atomic_user_sub_return(atomic_t *v, int i)
+		 */
+	case TBR_TT_ATOMIC_SUB:
+		p = (unsigned long *) __frame->gr8;
+		x = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				y = z - x;
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#126
+		 * int __atomic_user_add_return(atomic_t *v, int i)
+		 */
+	case TBR_TT_ATOMIC_ADD:
+		p = (unsigned long *) __frame->gr8;
+		x = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				y = z + x;
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+	default:
+		BUG();
+	}
+
+done2:
+	spin_unlock_irq(&atomic_op_lock);
+done:
+	if (!user_mode(__frame))
+		set_fs(oldfs);
+	__frame->gr5 = z;
+	__frame->gr9 = y;
+	return;
+
+error2:
+	spin_unlock_irq(&atomic_op_lock);
+error:
+	if (!user_mode(__frame))
+		set_fs(oldfs);
+	__frame->pc -= 4;
+
+	die_if_kernel("-- Atomic Op Error --\n");
+
+	info.si_signo	= SIGSEGV;
+	info.si_code	= SEGV_ACCERR;
+	info.si_errno	= 0;
+	info.si_addr	= (void *) __frame->pc;
+
+	force_sig_info(info.si_signo, &info, current);
+}
+
+/*****************************************************************************/
+/*
  *
  */
 asmlinkage void media_exception(unsigned long msr0, unsigned long msr1)
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index 2cba605..b15173f 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -13,6 +13,8 @@
 # Copyright (C) 1994 by Hamish Macdonald
 #
 
+KBUILD_DEFCONFIG := amiga_defconfig
+
 # override top level makefile
 AS += -m68020
 LDFLAGS := -m m68kelf
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index 5649fba..e419583 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:23 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:06 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-amiga"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -80,10 +128,24 @@
 CONFIG_M68040=y
 CONFIG_M68060=y
 CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -97,47 +159,288 @@
 CONFIG_PROC_HARDWARE=y
 CONFIG_ISA=y
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_ZORRO_NAMES=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+CONFIG_ATALK=m
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
 # Device Drivers
 #
 
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 CONFIG_PARPORT=m
 # CONFIG_PARPORT_PC is not set
-CONFIG_PARPORT_NOT_PC=y
 CONFIG_PARPORT_AMIGA=m
 CONFIG_PARPORT_MFC3=m
 # CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
 CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
+CONFIG_PARPORT_NOT_PC=y
 # CONFIG_PNP is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 CONFIG_AMIGA_FLOPPY=y
 CONFIG_AMIGA_Z2RAM=y
-# CONFIG_PARIDE is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
@@ -145,56 +448,66 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
 CONFIG_BLK_DEV_IDEFLOPPY=m
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_GAYLE=y
 CONFIG_BLK_DEV_IDEDOUBLER=y
 CONFIG_BLK_DEV_BUDDHA=y
-# CONFIG_IDE_CHIPSETS is not set
+
+#
+# Other IDE chipsets support
+#
+
+#
+# Note: most of these also require special kernel boot parameters
+#
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -206,6 +519,7 @@
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -213,30 +527,34 @@
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
 # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
 # CONFIG_SCSI_NCR53C406A is not set
+CONFIG_53C700_BE_BUS=y
 # CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
@@ -244,243 +562,42 @@
 CONFIG_A3000_SCSI=y
 CONFIG_A2091_SCSI=y
 CONFIG_GVP11_SCSI=y
-CONFIG_CYBERSTORM_SCSI=y
-CONFIG_CYBERSTORMII_SCSI=y
-CONFIG_BLZ2060_SCSI=y
-CONFIG_BLZ1230_SCSI=y
-CONFIG_FASTLANE_SCSI=y
-CONFIG_OKTAGON_SCSI=y
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+CONFIG_SCSI_A4000T=y
+CONFIG_SCSI_ZORRO7XX=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_MULTIPATH=m
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+CONFIG_VETH=m
 # CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
 CONFIG_ARIADNE=m
 CONFIG_A2065=m
 CONFIG_HYDRA=m
@@ -493,32 +610,24 @@
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
 # CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
-CONFIG_PLIP=m
+# CONFIG_PLIP is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
 CONFIG_PPP_FILTER=y
@@ -526,28 +635,28 @@
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -557,7 +666,6 @@
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -570,6 +678,7 @@
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_AMIGA=y
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
@@ -577,7 +686,7 @@
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
-CONFIG_MOUSE_AMIGA=y
+CONFIG_MOUSE_AMIGA=m
 # CONFIG_MOUSE_VSXXXAA is not set
 CONFIG_INPUT_JOYSTICK=y
 # CONFIG_JOYSTICK_ANALOG is not set
@@ -603,16 +712,16 @@
 # CONFIG_JOYSTICK_TURBOGRAFX is not set
 CONFIG_JOYSTICK_AMIGA=m
 # CONFIG_JOYSTICK_JOYDUMP is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
+# CONFIG_INPUT_UINPUT is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -621,6 +730,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 CONFIG_A2232=m
 
@@ -638,94 +748,102 @@
 CONFIG_PRINTER=m
 # CONFIG_LP_CONSOLE is not set
 # CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_CIRRUS=m
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=y
 CONFIG_FB_AMIGA=y
 CONFIG_FB_AMIGA_OCS=y
 CONFIG_FB_AMIGA_ECS=y
 CONFIG_FB_AMIGA_AGA=y
 CONFIG_FB_FM2=y
+# CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_FONT_PEARL_8x8=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -733,27 +851,21 @@
 CONFIG_SOUND=m
 CONFIG_DMASOUND_PAULA=m
 CONFIG_DMASOUND=m
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_AUXDISPLAY is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -768,10 +880,11 @@
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -782,25 +895,29 @@
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -808,7 +925,6 @@
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -827,19 +943,18 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
-CONFIG_AFFS_FS=y
+CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
 # CONFIG_BEFS_FS is not set
@@ -847,43 +962,39 @@
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -894,10 +1005,6 @@
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_AMIGA_PARTITION=y
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -938,35 +1045,42 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
@@ -975,9 +1089,21 @@
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -986,20 +1112,35 @@
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index 63024b0..e61196cd 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:27 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:07 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-apollo"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -80,10 +128,24 @@
 CONFIG_M68040=y
 CONFIG_M68060=y
 CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -93,134 +155,11 @@
 CONFIG_BINFMT_MISC=m
 CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -230,10 +169,17 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -245,145 +191,199 @@
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -391,46 +391,154 @@
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 # CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
 CONFIG_APOLLO_ELPLUS=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Ethernet (1000 Mbit)
+# Wireless LAN
 #
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -439,28 +547,28 @@
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -470,7 +578,6 @@
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -483,11 +590,19 @@
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -495,7 +610,7 @@
 # Hardware I/O ports
 #
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -506,6 +621,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -519,90 +635,114 @@
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_FB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+# CONFIG_FB_CFB_COPYAREA is not set
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_APOLLO=y
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -615,10 +755,11 @@
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -629,25 +770,29 @@
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -655,7 +800,6 @@
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -674,13 +818,12 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -694,44 +837,40 @@
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -741,10 +880,6 @@
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -785,35 +920,42 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -822,9 +964,21 @@
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -833,20 +987,35 @@
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 6433da2..ba7f971 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:32 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:09 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-atari"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -80,10 +128,24 @@
 CONFIG_M68040=y
 CONFIG_M68060=y
 CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -94,166 +156,11 @@
 CONFIG_STRAM_PROC=y
 CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARPORT_NOT_PC=y
-CONFIG_PARPORT_ATARI=m
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-CONFIG_ATARI_FLOPPY=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_FALCON_IDE=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -263,10 +170,17 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 # CONFIG_IP_PNP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
@@ -275,145 +189,199 @@
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -421,46 +389,189 @@
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
 
 #
-# Ethernet (10 or 100Mbit)
+# Wireless
 #
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+CONFIG_PARPORT=m
+CONFIG_PARPORT_ATARI=m
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_BLK_DEV=y
+CONFIG_ATARI_FLOPPY=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_FALCON_IDE=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_ATARI_SCSI=y
+# CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
+# CONFIG_ATARI_SCSI_RESET_BOOT is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 CONFIG_ATARILANCE=m
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NET_POCKET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Ethernet (1000 Mbit)
+# Wireless LAN
 #
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 # CONFIG_PLIP is not set
 CONFIG_PPP=m
@@ -470,28 +581,28 @@
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -501,7 +612,6 @@
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -509,26 +619,37 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_ATARI_KBD_CORE=y
+CONFIG_KEYBOARD_ATARI=y
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
+CONFIG_MOUSE_ATARI=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_M68K_BEEP=m
-CONFIG_INPUT_UINPUT=m
+# CONFIG_INPUT_UINPUT is not set
 
 #
 # Hardware I/O ports
 #
 CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_SERPORT is not set
 # CONFIG_SERIO_PARKBD is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
@@ -540,6 +661,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -556,86 +678,97 @@
 CONFIG_PRINTER=m
 # CONFIG_LP_CONSOLE is not set
 # CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
+CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_ATY is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_ATARI=y
+# CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_ATY is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
 
 #
 # Sound
@@ -643,27 +776,21 @@
 CONFIG_SOUND=m
 CONFIG_DMASOUND_ATARI=m
 CONFIG_DMASOUND=m
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_AUXDISPLAY is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -680,38 +807,44 @@
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
-CONFIG_REISERFS_PROC_INFO=y
+# CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_REISERFS_FS_XATTR is not set
 CONFIG_JFS_FS=m
 # CONFIG_JFS_POSIX_ACL is not set
 # CONFIG_JFS_SECURITY is not set
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
-
-#
-# XFS support
-#
+CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -719,7 +852,6 @@
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -738,13 +870,12 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -758,42 +889,38 @@
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
+CONFIG_SUNRPC_BIND34=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -804,10 +931,6 @@
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_ATARI_PARTITION=y
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -848,35 +971,42 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
@@ -885,9 +1015,21 @@
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -896,20 +1038,35 @@
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index da2a23a..ed98eff 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:37 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:10 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-bvme6000"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -85,6 +133,22 @@
 CONFIG_MMU_MOTOROLA=y
 # CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -93,134 +157,11 @@
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -230,10 +171,17 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -245,126 +193,186 @@
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -376,13 +384,8 @@
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -390,76 +393,186 @@
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_53C700_BE_BUS=y
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_BVME6000_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 # CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
 CONFIG_BVME6000_NET=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Ethernet (1000 Mbit)
+# Wireless LAN
 #
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -469,7 +582,6 @@
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -482,11 +594,19 @@
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -494,7 +614,7 @@
 # Hardware I/O ports
 #
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -505,6 +625,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -518,59 +639,56 @@
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -581,27 +699,20 @@
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -614,10 +725,11 @@
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -628,25 +740,29 @@
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -654,7 +770,6 @@
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -673,13 +788,12 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -693,44 +807,40 @@
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -740,10 +850,7 @@
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
+CONFIG_SYSV68_PARTITION=y
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -784,35 +891,42 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -821,9 +935,21 @@
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -832,20 +958,35 @@
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=m
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=m
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 5125188..38b68c7 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:41 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:12 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-hp300"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -81,10 +129,24 @@
 CONFIG_M68040=y
 CONFIG_M68060=y
 CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -94,134 +156,11 @@
 CONFIG_BINFMT_MISC=m
 CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -231,10 +170,17 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -246,145 +192,199 @@
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -392,46 +392,154 @@
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 # CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
 CONFIG_HPLANCE=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Ethernet (1000 Mbit)
+# Wireless LAN
 #
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -440,28 +548,28 @@
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -471,7 +579,6 @@
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -484,19 +591,35 @@
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_HIL_OLD=y
+CONFIG_KEYBOARD_HIL=y
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MOUSE_HIL=m
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_M68K_BEEP is not set
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_HP_SDC_RTC=m
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_HP_SDC=y
+CONFIG_HIL_MLC=y
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -507,6 +630,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -520,90 +644,114 @@
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_FB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+# CONFIG_FB_CFB_COPYAREA is not set
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_HP300=y
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -614,10 +762,11 @@
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -628,25 +777,29 @@
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -654,7 +807,6 @@
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -673,13 +825,12 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -693,44 +844,40 @@
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -740,10 +887,6 @@
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -784,35 +927,42 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -821,9 +971,21 @@
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -832,20 +994,35 @@
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index ff9dffa..738bca69 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:45 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:14 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-mac"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -82,10 +130,24 @@
 CONFIG_M68040=y
 # CONFIG_M68060 is not set
 CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -95,6 +157,263 @@
 CONFIG_BINFMT_MISC=m
 # CONFIG_HEARTBEAT is not set
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -103,28 +422,15 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
@@ -132,53 +438,50 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
 CONFIG_BLK_DEV_IDEFLOPPY=m
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_MAC_IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -190,6 +493,7 @@
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -197,58 +501,48 @@
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MAC_SCSI=y
-CONFIG_SCSI_MAC_ESP=y
-
-#
-# Multi-device support (RAID and LVM)
-#
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_MULTIPATH=m
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_ADB=y
 CONFIG_ADB_MACII=y
 CONFIG_ADB_MACIISI=y
@@ -257,253 +551,65 @@
 CONFIG_ADB_CUDA=y
 CONFIG_INPUT_ADBHID=y
 CONFIG_MAC_EMUMOUSEBTN=y
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 # CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 CONFIG_MAC8390=y
-CONFIG_MAC89x0=y
-CONFIG_MACSONIC=y
+CONFIG_MAC89x0=m
+CONFIG_MACSONIC=m
 CONFIG_MACMACE=y
 # CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Ethernet (1000 Mbit)
+# Wireless LAN
 #
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
 CONFIG_PPP_FILTER=y
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -513,7 +619,6 @@
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -526,19 +631,29 @@
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
+# CONFIG_INPUT_UINPUT is not set
 
 #
 # Hardware I/O ports
 #
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -549,6 +664,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -562,116 +678,117 @@
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 CONFIG_FB_MACMODES=y
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 CONFIG_FB_VALKYRIE=y
 CONFIG_FB_MAC=y
+# CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_FONT_6x11=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_MAC_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -685,10 +802,11 @@
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -699,25 +817,29 @@
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -725,7 +847,6 @@
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -744,13 +865,12 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -764,43 +884,39 @@
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -808,27 +924,9 @@
 #
 # Partition Types
 #
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-CONFIG_AMIGA_PARTITION=y
-CONFIG_ATARI_PARTITION=y
+# CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MAC_PARTITION=y
 CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_LDM_DEBUG=y
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-CONFIG_SUN_PARTITION=y
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -869,46 +967,65 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -917,20 +1034,35 @@
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index f0d5534..f40b1724 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:50 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:17 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-mvme147"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -85,6 +133,22 @@
 CONFIG_MMU_MOTOROLA=y
 # CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -93,135 +157,11 @@
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_MVME147_SCSI=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -231,10 +171,17 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -246,145 +193,199 @@
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -392,46 +393,155 @@
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MVME147_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 # CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
 CONFIG_MVME147_NET=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Ethernet (1000 Mbit)
+# Wireless LAN
 #
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -440,28 +550,28 @@
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -471,7 +581,6 @@
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -484,11 +593,19 @@
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -496,7 +613,7 @@
 # Hardware I/O ports
 #
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -507,6 +624,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -520,112 +638,80 @@
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -638,10 +724,11 @@
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -652,25 +739,29 @@
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -678,7 +769,6 @@
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -697,15 +787,12 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -719,44 +806,40 @@
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -766,10 +849,7 @@
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
+CONFIG_SYSV68_PARTITION=y
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -810,35 +890,42 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -847,9 +934,21 @@
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -858,20 +957,35 @@
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index 1d5c46f..e9ccc77 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:53 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:19 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-mvme16x"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -85,6 +133,22 @@
 CONFIG_MMU_MOTOROLA=y
 # CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -93,134 +157,11 @@
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -230,10 +171,17 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -245,145 +193,199 @@
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -391,46 +393,156 @@
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_53C700_BE_BUS=y
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MVME16x_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 # CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
 CONFIG_MVME16x_NET=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Ethernet (1000 Mbit)
+# Wireless LAN
 #
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -439,28 +551,28 @@
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -470,7 +582,6 @@
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -483,11 +594,19 @@
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -495,7 +614,7 @@
 # Hardware I/O ports
 #
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -506,6 +625,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -519,116 +639,85 @@
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
 #
+CONFIG_SERIAL167=y
 CONFIG_MVME162_SCC=y
 CONFIG_SERIAL_CONSOLE=y
 
@@ -637,10 +726,11 @@
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -651,25 +741,29 @@
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -677,7 +771,6 @@
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -696,15 +789,12 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -718,44 +808,40 @@
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -765,10 +851,7 @@
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
+CONFIG_SYSV68_PARTITION=y
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -809,35 +892,42 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -846,9 +936,21 @@
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -857,20 +959,35 @@
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index 8562386..165658f 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -1,63 +1,112 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:58 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:20 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-q40"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -80,10 +129,24 @@
 CONFIG_M68040=y
 CONFIG_M68060=y
 CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -91,182 +154,15 @@
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-# CONFIG_HEARTBEAT is not set
+CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ISA=y
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_Q40IDE=y
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -276,14 +172,18 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
 # CONFIG_ARPD is not set
@@ -291,145 +191,199 @@
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -437,29 +391,195 @@
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_Q40IDE=y
+
+#
+# Other IDE chipsets support
+#
+
+#
+# Note: most of these also require special kernel boot parameters
+#
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+CONFIG_VETH=m
 # CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
@@ -468,30 +588,21 @@
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
 CONFIG_NE2000=m
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -500,28 +611,28 @@
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -531,7 +642,6 @@
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -544,22 +654,32 @@
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
+# CONFIG_INPUT_UINPUT is not set
 
 #
 # Hardware I/O ports
 #
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_Q40KBD=m
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
@@ -571,6 +691,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -584,115 +705,117 @@
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 CONFIG_FB_Q40=y
+# CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
-CONFIG_SOUND=y
-CONFIG_DMASOUND_Q40=y
-CONFIG_DMASOUND=y
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_SOUND=m
+CONFIG_DMASOUND_Q40=m
+CONFIG_DMASOUND=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -703,10 +826,11 @@
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -717,25 +841,29 @@
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -743,7 +871,6 @@
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -762,13 +889,12 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -782,44 +908,39 @@
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -829,10 +950,6 @@
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -873,35 +990,42 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -910,9 +1034,21 @@
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -921,20 +1057,35 @@
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index af903b5..bd2b9c4 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:35:02 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:22 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+CONFIG_NO_DMA=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-sun3"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -69,10 +117,24 @@
 #
 CONFIG_M68020=y
 CONFIG_MMU_SUN3=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_SINGLE_MEMORY_CHUNK=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -81,134 +143,11 @@
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -218,10 +157,17 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -233,145 +179,199 @@
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -379,47 +379,156 @@
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SUN3_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 # CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
 CONFIG_SUN3LANCE=y
 CONFIG_SUN3_82586=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Ethernet (1000 Mbit)
+# Wireless LAN
 #
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -428,28 +537,28 @@
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -459,7 +568,6 @@
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -472,11 +580,19 @@
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -484,7 +600,7 @@
 # Hardware I/O ports
 #
 CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -495,6 +611,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -508,112 +625,113 @@
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -624,10 +742,11 @@
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -638,25 +757,29 @@
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -664,7 +787,6 @@
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -683,15 +805,12 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -705,44 +824,40 @@
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -753,10 +868,6 @@
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
 CONFIG_SUN_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -797,35 +908,42 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -834,9 +952,21 @@
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -845,20 +975,34 @@
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index 997143b..f18154f 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:35:06 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:23 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-sun3x"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -80,10 +128,24 @@
 # CONFIG_M68040 is not set
 # CONFIG_M68060 is not set
 CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -92,135 +154,11 @@
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_SUN3X_ESP=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -230,10 +168,17 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -245,145 +190,199 @@
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -391,46 +390,155 @@
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SUN3X_ESP=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 # CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
 CONFIG_SUN3LANCE=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Ethernet (1000 Mbit)
+# Wireless LAN
 #
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -439,28 +547,28 @@
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -470,7 +578,6 @@
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -483,11 +590,19 @@
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -495,7 +610,7 @@
 # Hardware I/O ports
 #
 CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -506,6 +621,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -519,112 +635,113 @@
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -635,10 +752,11 @@
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -649,25 +767,29 @@
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -675,7 +797,6 @@
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -694,15 +815,12 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -716,44 +834,40 @@
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -764,10 +878,6 @@
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
 CONFIG_SUN_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -808,35 +918,42 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -845,9 +962,21 @@
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -856,20 +985,35 @@
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/defconfig b/arch/m68k/defconfig
deleted file mode 100644
index 7d935e4..0000000
--- a/arch/m68k/defconfig
+++ /dev/null
@@ -1,657 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:17 2005
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Platform dependent setup
-#
-# CONFIG_SUN3 is not set
-CONFIG_AMIGA=y
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
-# CONFIG_VME is not set
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
-CONFIG_M68020=y
-CONFIG_M68030=y
-CONFIG_M68040=y
-# CONFIG_M68060 is not set
-CONFIG_MMU_MOTOROLA=y
-# CONFIG_M68KFPU_EMU is not set
-# CONFIG_ADVANCED is not set
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_ZORRO=y
-# CONFIG_AMIGA_PCMCIA is not set
-# CONFIG_HEARTBEAT is not set
-CONFIG_PROC_HARDWARE=y
-# CONFIG_ZORRO_NAMES is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-CONFIG_AMIGA_FLOPPY=y
-# CONFIG_AMIGA_Z2RAM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_A3000_SCSI=y
-CONFIG_A2091_SCSI=y
-CONFIG_GVP11_SCSI=y
-# CONFIG_CYBERSTORM_SCSI is not set
-# CONFIG_CYBERSTORMII_SCSI is not set
-# CONFIG_BLZ2060_SCSI is not set
-# CONFIG_BLZ1230_SCSI is not set
-# CONFIG_FASTLANE_SCSI is not set
-# CONFIG_OKTAGON_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_AMIGA is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_AMIGA is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_A2232 is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-CONFIG_FB_AMIGA=y
-CONFIG_FB_AMIGA_OCS=y
-CONFIG_FB_AMIGA_ECS=y
-CONFIG_FB_AMIGA_AGA=y
-# CONFIG_FB_FM2 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# Character devices
-#
-CONFIG_AMIGA_BUILTIN_SERIAL=y
-# CONFIG_MULTIFACE_III_TTY is not set
-# CONFIG_GVPIOEXT is not set
-# CONFIG_SERIAL_CONSOLE is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_AMIGA_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 72097daca..1c62381f 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -482,10 +482,13 @@
 # be 16kb aligned or the handling of the current variable will break.
 # Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys
 #
-#core-$(CONFIG_SGI_IP28)		+= arch/mips/sgi-ip22/ arch/mips/arc/arc_con.o
+ifdef CONFIG_SGI_IP28
+  ifeq ($(call cc-option-yn,-mr10k-cache-barrier=1), n)
+      $(error gcc doesn't support needed option -mr10k-cache-barrier=1)
+  endif
+endif
 core-$(CONFIG_SGI_IP28)		+= arch/mips/sgi-ip22/
 cflags-$(CONFIG_SGI_IP28)	+= -mr10k-cache-barrier=1 -Iinclude/asm-mips/mach-ip28
-#cflags-$(CONFIG_SGI_IP28)	+= -Iinclude/asm-mips/mach-ip28
 load-$(CONFIG_SGI_IP28)		+= 0xa800000020004000
 
 #
diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/au1000/common/cputable.c
index d8df5fd..5c0d35d 100644
--- a/arch/mips/au1000/common/cputable.c
+++ b/arch/mips/au1000/common/cputable.c
@@ -22,24 +22,24 @@
 /* With some thought, we can probably use the mask to reduce the
  * size of the table.
  */
-struct cpu_spec	cpu_specs[] = {
-    { 0xffffffff, 0x00030100, "Au1000 DA", 1, 0 },
-    { 0xffffffff, 0x00030201, "Au1000 HA", 1, 0 },
-    { 0xffffffff, 0x00030202, "Au1000 HB", 1, 0 },
-    { 0xffffffff, 0x00030203, "Au1000 HC", 1, 1 },
-    { 0xffffffff, 0x00030204, "Au1000 HD", 1, 1 },
-    { 0xffffffff, 0x01030200, "Au1500 AB", 1, 1 },
-    { 0xffffffff, 0x01030201, "Au1500 AC", 0, 1 },
-    { 0xffffffff, 0x01030202, "Au1500 AD", 0, 1 },
-    { 0xffffffff, 0x02030200, "Au1100 AB", 1, 1 },
-    { 0xffffffff, 0x02030201, "Au1100 BA", 1, 1 },
-    { 0xffffffff, 0x02030202, "Au1100 BC", 1, 1 },
-    { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1 },
-    { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 },
-    { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 },
-    { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 },
-    { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0 },
-    { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 },
+struct cpu_spec cpu_specs[] = {
+	{ 0xffffffff, 0x00030100, "Au1000 DA", 1, 0, 1 },
+	{ 0xffffffff, 0x00030201, "Au1000 HA", 1, 0, 1 },
+	{ 0xffffffff, 0x00030202, "Au1000 HB", 1, 0, 1 },
+	{ 0xffffffff, 0x00030203, "Au1000 HC", 1, 1, 0 },
+	{ 0xffffffff, 0x00030204, "Au1000 HD", 1, 1, 0 },
+	{ 0xffffffff, 0x01030200, "Au1500 AB", 1, 1, 0 },
+	{ 0xffffffff, 0x01030201, "Au1500 AC", 0, 1, 0 },
+	{ 0xffffffff, 0x01030202, "Au1500 AD", 0, 1, 0 },
+	{ 0xffffffff, 0x02030200, "Au1100 AB", 1, 1, 0 },
+	{ 0xffffffff, 0x02030201, "Au1100 BA", 1, 1, 0 },
+	{ 0xffffffff, 0x02030202, "Au1100 BC", 1, 1, 0 },
+	{ 0xffffffff, 0x02030203, "Au1100 BD", 0, 1, 0 },
+	{ 0xffffffff, 0x02030204, "Au1100 BE", 0, 1, 0 },
+	{ 0xffffffff, 0x03030200, "Au1550 AA", 0, 1, 0 },
+	{ 0xffffffff, 0x04030200, "Au1200 AB", 0, 0, 0 },
+	{ 0xffffffff, 0x04030201, "Au1200 AC", 1, 0, 0 },
+	{ 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 }
 };
 
 void
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
index d885e38..9e4ab80 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/au1000/common/setup.c
@@ -57,7 +57,7 @@
 {
 	struct	cpu_spec *sp;
 	char *argptr;
-	unsigned long prid, cpupll, bclk = 1;
+	unsigned long prid, cpufreq, bclk = 1;
 
 	set_cpuspec();
 	sp = cur_cpu_spec[0];
@@ -65,8 +65,15 @@
 	board_setup();  /* board specific setup */
 
 	prid = read_c0_prid();
-	cpupll = (au_readl(0xB1900060) & 0x3F) * 12;
-	printk("(PRId %08lx) @ %ldMHZ\n", prid, cpupll);
+	if (sp->cpu_pll_wo)
+#ifdef CONFIG_SOC_AU1000_FREQUENCY
+		cpufreq = CONFIG_SOC_AU1000_FREQUENCY / 1000000;
+#else
+		cpufreq = 396;
+#endif
+	else
+		cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12;
+	printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq);
 
 	bclk = sp->cpu_bclk;
 	if (bclk)
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index f113b51..e122bbc 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -209,18 +209,22 @@
 		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
 		au_writel(0, SYS_TOYWRITE);
 		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
-
-		cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) *
-			AU1000_SRC_CLK;
-	}
-	else {
-		/* The 32KHz oscillator isn't running, so assume there
-		 * isn't one and grab the processor speed from the PLL.
-		 * NOTE: some old silicon doesn't allow reading the PLL.
-		 */
-		cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
+	} else
 		no_au1xxx_32khz = 1;
-	}
+
+	/*
+	 * On early Au1000, sys_cpupll was write-only. Since these
+	 * silicon versions of Au1000 are not sold by AMD, we don't bend
+	 * over backwards trying to determine the frequency.
+	 */
+	if (cur_cpu_spec[0]->cpu_pll_wo)
+#ifdef CONFIG_SOC_AU1000_FREQUENCY
+		cpu_speed = CONFIG_SOC_AU1000_FREQUENCY;
+#else
+		cpu_speed = 396000000;
+#endif
+	else
+		cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
 	mips_hpt_frequency = cpu_speed;
 	// Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16)
 	set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
diff --git a/arch/mips/au1000/xxs1500/board_setup.c b/arch/mips/au1000/xxs1500/board_setup.c
index a9237f4..b2e413e 100644
--- a/arch/mips/au1000/xxs1500/board_setup.c
+++ b/arch/mips/au1000/xxs1500/board_setup.c
@@ -33,11 +33,10 @@
 #include <asm/cpu.h>
 #include <asm/bootinfo.h>
 #include <asm/irq.h>
-#include <asm/keyboard.h>
 #include <asm/mipsregs.h>
 #include <asm/reboot.h>
 #include <asm/pgtable.h>
-#include <asm/au1000.h>
+#include <asm/mach-au1x00/au1000.h>
 
 void board_reset(void)
 {
diff --git a/arch/mips/au1000/xxs1500/irqmap.c b/arch/mips/au1000/xxs1500/irqmap.c
index 38934929..a343da1 100644
--- a/arch/mips/au1000/xxs1500/irqmap.c
+++ b/arch/mips/au1000/xxs1500/irqmap.c
@@ -45,7 +45,7 @@
 #include <asm/io.h>
 #include <asm/mipsregs.h>
 #include <asm/system.h>
-#include <asm/au1000.h>
+#include <asm/mach-au1x00/au1000.h>
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
 	{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index abf70d7..3b42cea 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -1,58 +1,48 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:22 2007
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 08:11:19 2008
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
-CONFIG_SIBYTE_BIGSUR=y
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+CONFIG_SIBYTE_BIGSUR=y
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
 CONFIG_SIBYTE_BCM1x80=y
 CONFIG_SIBYTE_SB1xxx_SOC=y
 # CONFIG_CPU_SB1_PASS_1 is not set
@@ -68,9 +58,11 @@
 # CONFIG_SIBYTE_CFE_CONSOLE is not set
 # CONFIG_SIBYTE_BUS_WATCHER is not set
 # CONFIG_SIBYTE_TBPROF is not set
+CONFIG_SIBYTE_HAS_ZBUS_PROFILING=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -81,11 +73,17 @@
 # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_CEVT_BCM1480=y
 CONFIG_CSRC_BCM1480=y
+CONFIG_CFE=y
 CONFIG_DMA_COHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_BOOT_ELF32=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -93,10 +91,6 @@
 #
 # CPU selection
 #
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_CPU_LOONGSON2 is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
@@ -137,14 +131,15 @@
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -152,13 +147,19 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 CONFIG_SMP=y
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_NR_CPUS_DEFAULT_4=y
 CONFIG_NR_CPUS=4
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -171,38 +172,45 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
 # CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -211,24 +219,33 @@
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
@@ -236,12 +253,10 @@
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLOCK_COMPAT=y
 
 #
 # IO Schedulers
@@ -255,6 +270,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -262,23 +278,19 @@
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_PCI_DEBUG=y
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
+CONFIG_ZONE_DMA32=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_SYSVIPC_COMPAT=y
@@ -292,7 +304,6 @@
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
 
 #
 # Networking
@@ -302,7 +313,6 @@
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -310,10 +320,11 @@
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
@@ -322,41 +333,141 @@
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
 # CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
 CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_ADVANCED is not set
 
 #
-# DCCP Configuration (EXPERIMENTAL)
+# Core Netfilter Configuration
 #
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -369,10 +480,6 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -380,9 +487,21 @@
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -391,85 +510,70 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_SGI_IOC4=m
 # CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 CONFIG_BLK_DEV_IDETAPE=y
 CONFIG_BLK_DEV_IDEFLOPPY=y
+# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
 CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
+CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
@@ -495,87 +599,196 @@
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 CONFIG_BLK_DEV_TC86C001=m
 # CONFIG_BLK_DEV_IDE_SWARM is not set
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
+# SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_ATA is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
 
 #
-# Multi-device support (RAID and LVM)
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+CONFIG_SATA_SIL24=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+CONFIG_PATA_SIL680=y
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
 
 #
-# PHY device support
+# MII PHY device drivers
 #
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -585,52 +798,53 @@
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3=m
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_NET_FC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -660,17 +874,16 @@
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
-CONFIG_MOXA_SMARTIO_NEW=m
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
 # CONFIG_RIO is not set
 # CONFIG_STALDRV is not set
-CONFIG_SERIAL_SB1250_DUART=y
-CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -680,39 +893,24 @@
 #
 # Non-8250 serial port support
 #
+CONFIG_SERIAL_SB1250_DUART=y
+CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
@@ -736,29 +934,30 @@
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PASEMI is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 CONFIG_I2C_SIBYTE=y
+# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-CONFIG_SENSORS_DS1337=y
-CONFIG_SENSORS_DS1374=y
+# CONFIG_DS1682 is not set
 CONFIG_SENSORS_EEPROM=y
 CONFIG_SENSORS_PCF8574=y
-CONFIG_SENSORS_PCA9539=y
+# CONFIG_PCF8575 is not set
 CONFIG_SENSORS_PCF8591=y
+# CONFIG_TPS65010 is not set
 CONFIG_SENSORS_MAX6875=y
+# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
@@ -769,43 +968,49 @@
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Hardware Monitoring support
+# Sonics Silicon Backplane
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
@@ -814,104 +1019,73 @@
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 
 #
-# DMA Engine support
+# Userspace I/O
 #
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
+# CONFIG_UIO is not set
 
 #
 # File systems
 #
-CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS=m
 CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
 #
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
 
 #
 # DOS/FAT/NT Filesystems
 #
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
 
 #
 # Pseudo filesystems
@@ -923,7 +1097,6 @@
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=m
 
 #
@@ -939,14 +1112,13 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -958,6 +1130,7 @@
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -965,37 +1138,61 @@
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
 CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
 # CONFIG_DLM_DEBUG is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1003,8 +1200,8 @@
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
 CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
@@ -1014,15 +1211,19 @@
 CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_SB1XXX_CORELIS is not set
@@ -1034,23 +1235,22 @@
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_GF128MUL=m
@@ -1058,39 +1258,50 @@
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 # CONFIG_CRYPTO_CRC32C is not set
 CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c
index 3191afa..25f4eab 100644
--- a/arch/mips/kernel/gdb-stub.c
+++ b/arch/mips/kernel/gdb-stub.c
@@ -139,7 +139,6 @@
 #include <asm/system.h>
 #include <asm/gdb-stub.h>
 #include <asm/inst.h>
-#include <asm/smp.h>
 
 /*
  * external low-level support routines
@@ -656,6 +655,7 @@
 	*epc = (unsigned long)async_breakpoint;
 }
 
+#ifdef CONFIG_SMP
 static void kgdb_wait(void *arg)
 {
 	unsigned flags;
@@ -668,6 +668,7 @@
 
 	local_irq_restore(flags);
 }
+#endif
 
 /*
  * GDB stub needs to call kgdb_wait on all processor with interrupts
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index fc4aa07..38fa1a1 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -15,6 +15,7 @@
 #include <asm/time.h>
 
 DEFINE_SPINLOCK(i8253_lock);
+EXPORT_SYMBOL(i8253_lock);
 
 /*
  * Initialize the PIT timer.
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 9f85d4c..b45a709 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -157,6 +157,6 @@
 {
 	plat_time_init();
 
-	if (mips_clockevent_init() || !cpu_has_mfc0_count_bug())
+	if (!mips_clockevent_init() || !cpu_has_mfc0_count_bug())
 		init_mips_clocksource();
 }
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index eed2dc4..39804c5 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -262,13 +262,21 @@
 /* Find some VPE program space  */
 static void *alloc_progmem(unsigned long len)
 {
+	void *addr;
+
 #ifdef CONFIG_MIPS_VPE_LOADER_TOM
-	/* this means you must tell linux to use less memory than you physically have */
-	return pfn_to_kaddr(max_pfn);
+	/*
+	 * This means you must tell Linux to use less memory than you
+	 * physically have, for example by passing a mem= boot argument.
+	 */
+	addr = pfn_to_kaddr(max_pfn);
+	memset(addr, 0, len);
 #else
-	// simple grab some mem for now
-	return kmalloc(len, GFP_KERNEL);
+	/* simple grab some mem for now */
+	addr = kzalloc(len, GFP_KERNEL);
 #endif
+
+	return addr;
 }
 
 static void release_progmem(void *ptr)
@@ -884,9 +892,10 @@
 	}
 
 	v->load_addr = alloc_progmem(mod.core_size);
-	memset(v->load_addr, 0, mod.core_size);
+	if (!v->load_addr)
+		return -ENOMEM;
 
-	printk("VPE loader: loading to %p\n", v->load_addr);
+	pr_info("VPE loader: loading to %p\n", v->load_addr);
 
 	if (relocate) {
 		for (i = 0; i < hdr->e_shnum; i++) {
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 6496925..77aefb4 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -361,6 +361,16 @@
 #endif
 }
 
+static void r4k__flush_cache_vmap(void)
+{
+	r4k_blast_dcache();
+}
+
+static void r4k__flush_cache_vunmap(void)
+{
+	r4k_blast_dcache();
+}
+
 static inline void local_r4k_flush_cache_range(void * args)
 {
 	struct vm_area_struct *vma = args;
@@ -1281,6 +1291,10 @@
 					PAGE_SIZE - 1);
 	else
 		shm_align_mask = PAGE_SIZE-1;
+
+	__flush_cache_vmap	= r4k__flush_cache_vmap;
+	__flush_cache_vunmap	= r4k__flush_cache_vunmap;
+
 	flush_cache_all		= cache_noop;
 	__flush_cache_all	= r4k___flush_cache_all;
 	flush_cache_mm		= r4k_flush_cache_mm;
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index b09d569..a9f7f1f 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -122,6 +122,16 @@
 	local_irq_restore(flags);
 }
 
+static void tx39__flush_cache_vmap(void)
+{
+	tx39_blast_dcache();
+}
+
+static void tx39__flush_cache_vunmap(void)
+{
+	tx39_blast_dcache();
+}
+
 static inline void tx39_flush_cache_all(void)
 {
 	if (!cpu_has_dc_aliases)
@@ -344,6 +354,8 @@
 	switch (current_cpu_type()) {
 	case CPU_TX3912:
 		/* TX39/H core (writethru direct-map cache) */
+		__flush_cache_vmap	= tx39__flush_cache_vmap;
+		__flush_cache_vunmap	= tx39__flush_cache_vunmap;
 		flush_cache_all	= tx39h_flush_icache_all;
 		__flush_cache_all	= tx39h_flush_icache_all;
 		flush_cache_mm		= (void *) tx39h_flush_icache_all;
@@ -369,6 +381,9 @@
 		write_c0_wired(0);	/* set 8 on reset... */
 		/* board-dependent init code may set WBON */
 
+		__flush_cache_vmap	= tx39__flush_cache_vmap;
+		__flush_cache_vunmap	= tx39__flush_cache_vunmap;
+
 		flush_cache_all = tx39_flush_cache_all;
 		__flush_cache_all = tx39___flush_cache_all;
 		flush_cache_mm = tx39_flush_cache_mm;
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 51ab1fa..f590367 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -30,6 +30,9 @@
 	unsigned long pfn);
 void (*flush_icache_range)(unsigned long start, unsigned long end);
 
+void (*__flush_cache_vmap)(void);
+void (*__flush_cache_vunmap)(void);
+
 /* MIPS specific cache operations */
 void (*flush_cache_sigtramp)(unsigned long addr);
 void (*local_flush_data_cache_page)(void * addr);
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 3a93d4c..382738c 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -307,6 +307,7 @@
 	case CPU_R12000:
 	case CPU_R14000:
 	case CPU_4KC:
+	case CPU_4KEC:
 	case CPU_SB1:
 	case CPU_SB1A:
 	case CPU_4KSC:
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
index ab68c43..87e2c8f 100644
--- a/arch/mips/pci/pci-bcm1480.c
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -185,8 +185,8 @@
 
 static struct resource bcm1480_io_resource = {
 	.name	= "BCM1480 PCI I/O",
-	.start	= 0x2c000000UL,
-	.end	= 0x2dffffffUL,
+	.start	= A_BCM1480_PHYS_PCI_IO_MATCH_BYTES,
+	.end	= A_BCM1480_PHYS_PCI_IO_MATCH_BYTES + 0x1ffffffUL,
 	.flags	= IORESOURCE_IO,
 };
 
@@ -194,6 +194,7 @@
 	.pci_ops	= &bcm1480_pci_ops,
 	.mem_resource	= &bcm1480_mem_resource,
 	.io_resource	= &bcm1480_io_resource,
+	.io_offset      = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES,
 };
 
 
@@ -251,6 +252,7 @@
 
 	bcm1480_controller.io_map_base = (unsigned long)
 		ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536);
+	bcm1480_controller.io_map_base -= bcm1480_controller.io_offset;
 	set_io_port_base(bcm1480_controller.io_map_base);
 	isa_slot_offset = (unsigned long)
 		ioremap(A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, 1024*1024);
diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c
index 005e7fe..f54f454 100644
--- a/arch/mips/pci/pci-bcm1480ht.c
+++ b/arch/mips/pci/pci-bcm1480ht.c
@@ -180,8 +180,8 @@
 
 static struct resource bcm1480ht_io_resource = {
 	.name	= "BCM1480 HT I/O",
-	.start	= 0x00000000UL,
-	.end	= 0x01ffffffUL,
+	.start	= A_BCM1480_PHYS_HT_IO_MATCH_BYTES,
+	.end	= A_BCM1480_PHYS_HT_IO_MATCH_BYTES + 0x01ffffffUL,
 	.flags	= IORESOURCE_IO,
 };
 
@@ -191,29 +191,22 @@
 	.io_resource	= &bcm1480ht_io_resource,
 	.index		= 1,
 	.get_busno	= bcm1480ht_pcibios_get_busno,
+	.io_offset      = A_BCM1480_PHYS_HT_IO_MATCH_BYTES,
 };
 
 static int __init bcm1480ht_pcibios_init(void)
 {
-	uint32_t cmdreg;
-
 	ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024);
 
-	/*
-	 * See if the PCI bus has been configured by the firmware.
-	 */
-	cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
-				     PCI_COMMAND));
-	if (!(cmdreg & PCI_COMMAND_MASTER)) {
-		printk("HT: Skipping HT probe. Bus is not initialized.\n");
-		iounmap(ht_cfg_space);
-		return 1; /* XXX */
-	}
+	/* CFE doesn't always init all HT paths, so we always scan */
 	bcm1480ht_bus_status |= PCI_BUS_ENABLED;
 
 	ht_eoi_space = (unsigned long)
 		ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES,
 			4 * 1024 * 1024);
+	bcm1480ht_controller.io_map_base = (unsigned long)
+		ioremap(A_BCM1480_PHYS_HT_IO_MATCH_BYTES, 65536);
+	bcm1480ht_controller.io_map_base -= bcm1480ht_controller.io_offset;
 
 	register_pci_controller(&bcm1480ht_controller);
 
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
index 30737ea..c6ca631 100644
--- a/arch/powerpc/boot/dts/cm5200.dts
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -212,13 +212,30 @@
 		ethernet@3000 {
 			device_type = "network";
 			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <3000 800>;
+			reg = <3000 400>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <2 5 0>;
 			interrupt-parent = <&mpc5200_pic>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <3000 400>;       // fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+			interrupt-parent = <&mpc5200_pic>;
+
+			phy0: ethernet-phy@0 {
+				device_type = "ethernet-phy";
+				reg = <0>;
+			};
 		};
 
 		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <3d40 40>;
 			interrupts = <2 10 0>;
@@ -231,4 +248,22 @@
 			reg = <8000 4000>;
 		};
 	};
+
+	lpb {
+		model = "fsl,lpb";
+		compatible = "fsl,lpb";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 fc000000 2000000>;
+
+		// 16-bit flash device at LocalPlus Bus CS0
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 2000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 0d701c1..09b4e16 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -258,6 +258,21 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <2 5 0>;
 			interrupt-parent = <&mpc5200_pic>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-mdio";
+			reg = <3000 400>;	// fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
+			interrupt-parent = <&mpc5200_pic>;
+
+			phy0:ethernet-phy@1 {
+				device_type = "ethernet-phy";
+				reg = <1>;
+			};
 		};
 
 		ata@3a00 {
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index 76951ab..2b0dde0 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -148,7 +148,6 @@
 			interrupt-parent = <&mpc5200_pic>;
 		};
 
-
 		spi@f00 {
 			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
 			reg = <f00 20>;
@@ -209,10 +208,25 @@
 		ethernet@3000 {
 			device_type = "network";
 			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <3000 800>;
+			reg = <3000 400>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <2 5 0>;
 			interrupt-parent = <&mpc5200_pic>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <3000 400>;       // fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+			interrupt-parent = <&mpc5200_pic>;
+
+			phy0: ethernet-phy@2 {
+				device_type = "ethernet-phy";
+				reg = <2>;
+			};
 		};
 
 		ata@3a00 {
@@ -223,11 +237,19 @@
 		};
 
 		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <3d40 40>;
 			interrupts = <2 10 0>;
 			interrupt-parent = <&mpc5200_pic>;
 			fsl5200-clocking;
+
+			rtc@68 {
+				device_type = "rtc";
+				compatible = "dallas,ds1339";
+				reg = <68>;
+			};
 		};
 
 		sram@8000 {
@@ -240,7 +262,8 @@
 		compatible = "fsl,lpb";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		ranges = <1 0 50000000 00010000
+		ranges = <0 0 ff000000 01000000
+			  1 0 50000000 00010000
 			  2 0 50010000 00010000
 			  3 0 50020000 00010000>;
 
@@ -271,31 +294,15 @@
 			compatible = "promess,pro_module_dio";
 			reg = <3 800 2>;
 		};
-	};
 
-	pci@f0000d00 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
-		reg = <f0000d00 100>;
-		interrupt-map-mask = <f800 0 0 7>;
-		interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
-				 c000 0 0 2 &mpc5200_pic 1 1 3
-				 c000 0 0 3 &mpc5200_pic 1 2 3
-				 c000 0 0 4 &mpc5200_pic 1 3 3
-
-				 c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
-				 c800 0 0 2 &mpc5200_pic 1 2 3
-				 c800 0 0 3 &mpc5200_pic 1 3 3
-				 c800 0 0 4 &mpc5200_pic 0 0 3>;
-		clock-frequency = <0>; // From boot loader
-		interrupts = <2 8 0 2 9 0 2 a 0>;
-		interrupt-parent = <&mpc5200_pic>;
-		bus-range = <0 0>;
-		ranges = <42000000 0 80000000 80000000 0 20000000
-			  02000000 0 a0000000 a0000000 0 10000000
-			  01000000 0 00000000 b0000000 0 01000000>;
+		// 16-bit flash device at LocalPlus Bus CS0
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 01000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 49c05e9..eac8e1b 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -255,14 +255,14 @@
 		};
 
 		sata@18000 {
-			compatible = "fsl,mpc8379-sata";
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 			reg = <0x18000 0x1000>;
 			interrupts = <44 0x8>;
 			interrupt-parent = <&ipic>;
 		};
 
 		sata@19000 {
-			compatible = "fsl,mpc8379-sata";
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 			reg = <0x19000 0x1000>;
 			interrupts = <45 0x8>;
 			interrupt-parent = <&ipic>;
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 440aa4d..5bc09ad 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -143,7 +143,6 @@
 			mode = "cpu";
 		};
 
-		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -151,7 +150,7 @@
 			#size-cells = <0>;
 			interrupt-parent = <&ipic>;
 			interrupts = <38 0x8>;
-			phy_type = "utmi";
+			phy_type = "ulpi";
 		};
 
 		mdio@24520 {
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 9271153..711f9a3 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -143,7 +143,6 @@
 			mode = "cpu";
 		};
 
-		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -151,7 +150,7 @@
 			#size-cells = <0>;
 			interrupt-parent = <&ipic>;
 			interrupts = <38 0x8>;
-			phy_type = "utmi";
+			phy_type = "ulpi";
 		};
 
 		mdio@24520 {
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index fdb4a92..6f78a9f 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -255,28 +255,28 @@
 		};
 
 		sata@18000 {
-			compatible = "fsl,mpc8379-sata";
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 			reg = <0x18000 0x1000>;
 			interrupts = <44 0x8>;
 			interrupt-parent = <&ipic>;
 		};
 
 		sata@19000 {
-			compatible = "fsl,mpc8379-sata";
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 			reg = <0x19000 0x1000>;
 			interrupts = <45 0x8>;
 			interrupt-parent = <&ipic>;
 		};
 
 		sata@1a000 {
-			compatible = "fsl,mpc8379-sata";
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 			reg = <0x1a000 0x1000>;
 			interrupts = <46 0x8>;
 			interrupt-parent = <&ipic>;
 		};
 
 		sata@1b000 {
-			compatible = "fsl,mpc8379-sata";
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 			reg = <0x1b000 0x1000>;
 			interrupts = <47 0x8>;
 			interrupt-parent = <&ipic>;
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 0dda2fc..c11ceb7 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -143,7 +143,6 @@
 			mode = "cpu";
 		};
 
-		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -151,7 +150,7 @@
 			#size-cells = <0>;
 			interrupt-parent = <&ipic>;
 			interrupts = <38 0x8>;
-			phy_type = "utmi";
+			phy_type = "ulpi";
 		};
 
 		mdio@24520 {
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index c86464f..65bcea6 100644
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -127,10 +127,25 @@
 		ethernet@3000 {
 			device_type = "network";
 			compatible = "fsl,mpc5200-fec";
-			reg = <3000 800>;
+			reg = <3000 400>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <2 5 0>;
 			interrupt-parent = <&mpc5200_pic>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <3000 400>;       // fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+			interrupt-parent = <&mpc5200_pic>;
+
+			phy0: ethernet-phy@0 {
+				device_type = "ethernet-phy";
+				reg = <0>;
+			};
 		};
 
 		ata@3a00 {
@@ -141,11 +156,19 @@
 		};
 
 		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "fsl,mpc5200-i2c","fsl-i2c";
 			reg = <3d40 40>;
 			interrupts = <2 10 0>;
 			interrupt-parent = <&mpc5200_pic>;
 			fsl5200-clocking;
+
+			 rtc@68 {
+				device_type = "rtc";
+				compatible = "dallas,ds1307";
+				reg = <68>;
+			};
 		};
 
 		sram@8000 {
@@ -154,6 +177,23 @@
 		};
 	};
 
+	lpb {
+		model = "fsl,lpb";
+		compatible = "fsl,lpb";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 fc000000 02000000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 02000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+	};
+
 	pci@f0000d00 {
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
diff --git a/arch/powerpc/configs/mpc832x_mds_defconfig b/arch/powerpc/configs/mpc832x_mds_defconfig
index 79d228f..50cceda 100644
--- a/arch/powerpc/configs/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:16 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:36:51 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -628,8 +628,7 @@
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -824,10 +823,6 @@
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc834x_mds_defconfig b/arch/powerpc/configs/mpc834x_mds_defconfig
index 9360144..b4e82c0 100644
--- a/arch/powerpc/configs/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:20 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:36:56 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -571,8 +571,7 @@
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -767,10 +766,6 @@
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc836x_mds_defconfig b/arch/powerpc/configs/mpc836x_mds_defconfig
index 7c8b060..d50a96e 100644
--- a/arch/powerpc/configs/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:21 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:36:57 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -626,8 +626,7 @@
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -822,10 +821,6 @@
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc837x_rdb_defconfig b/arch/powerpc/configs/mpc837x_rdb_defconfig
index 44093a0..a633176 100644
--- a/arch/powerpc/configs/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/mpc837x_rdb_defconfig
@@ -684,7 +684,29 @@
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 1f6cf68..029d2da 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -690,7 +690,29 @@
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
diff --git a/arch/powerpc/configs/mpc8544_ds_defconfig b/arch/powerpc/configs/mpc8544_ds_defconfig
index c75b6ae..418bcdb 100644
--- a/arch/powerpc/configs/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/mpc8544_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:26 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:03 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -742,8 +742,7 @@
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -1209,10 +1208,6 @@
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc8568mds_defconfig b/arch/powerpc/configs/mpc8568mds_defconfig
index e7da4b9..2b866b3 100644
--- a/arch/powerpc/configs/mpc8568mds_defconfig
+++ b/arch/powerpc/configs/mpc8568mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:28 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:05 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -629,8 +629,7 @@
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -825,10 +824,6 @@
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc8572_ds_defconfig b/arch/powerpc/configs/mpc8572_ds_defconfig
index 460afe9..53aa6f3 100644
--- a/arch/powerpc/configs/mpc8572_ds_defconfig
+++ b/arch/powerpc/configs/mpc8572_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:29 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:06 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -742,8 +742,7 @@
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -1209,10 +1208,6 @@
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 615e4c1..2075722 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:31 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:08 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -750,8 +750,7 @@
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -1217,10 +1216,6 @@
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig
index 994e768..d01dcdb 100644
--- a/arch/powerpc/configs/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:34 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:11 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -736,8 +736,7 @@
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -1203,10 +1202,6 @@
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 797f0df..09f3062 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Tue Jan 15 10:26:10 2008
+# Linux kernel version: 2.6.25-rc6
+# Tue Mar 25 10:25:48 2008
 #
 CONFIG_PPC64=y
 
@@ -27,6 +27,7 @@
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,17 +68,19 @@
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -91,11 +94,13 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -103,6 +108,15 @@
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -130,6 +144,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -140,8 +155,8 @@
 # CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 CONFIG_PPC_PASEMI=y
@@ -159,6 +174,7 @@
 # CONFIG_PPC_IBM_CELL_BLADE is not set
 # CONFIG_PQ2ADS is not set
 CONFIG_PPC_NATIVE=y
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -189,7 +205,6 @@
 # CPU Frequency drivers
 #
 CONFIG_PPC_PASEMI_CPUFREQ=y
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -204,16 +219,20 @@
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
 CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_FORCE_MAX_ZONEORDER=9
 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 CONFIG_IOMMU_VMERGE=y
+CONFIG_IOMMU_HELPER=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_IRQ_ALL_CPUS is not set
@@ -236,12 +255,12 @@
 CONFIG_BOUNCE=y
 CONFIG_PPC_HAS_HASH_64K=y
 CONFIG_PPC_64K_PAGES=y
+# CONFIG_PPC_SUBPAGE_PROT is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-# CONFIG_WANT_DEVICE_TREE is not set
 CONFIG_ISA_DMA_API=y
 
 #
@@ -290,6 +309,7 @@
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -346,6 +366,7 @@
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -441,8 +462,10 @@
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_CAFE is not set
+CONFIG_MTD_NAND_PASEMI=y
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -465,7 +488,7 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -473,11 +496,13 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
@@ -485,6 +510,7 @@
 # CONFIG_BLK_DEV_IDECS is not set
 # CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 CONFIG_BLK_DEV_IDESCSI=y
@@ -500,7 +526,6 @@
 #
 # PCI IDE chipsets support
 #
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
 # CONFIG_BLK_DEV_GENERIC is not set
 # CONFIG_BLK_DEV_OPTI621 is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
@@ -528,7 +553,6 @@
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -593,6 +617,7 @@
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -646,6 +671,7 @@
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -699,7 +725,6 @@
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
@@ -715,6 +740,7 @@
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -742,6 +768,7 @@
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -754,6 +781,9 @@
 CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -779,6 +809,7 @@
 CONFIG_PASEMI_MAC=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -802,7 +833,6 @@
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -861,6 +891,7 @@
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -886,8 +917,7 @@
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_PASEMI=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 
@@ -897,6 +927,7 @@
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
 # CONFIG_HANGCHECK_TIMER is not set
@@ -944,13 +975,12 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -975,6 +1005,7 @@
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1004,6 +1035,7 @@
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -1013,9 +1045,11 @@
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1183,6 +1217,7 @@
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
@@ -1208,6 +1243,7 @@
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
@@ -1225,6 +1261,7 @@
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
 
@@ -1259,6 +1296,10 @@
 #
 
 #
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
@@ -1280,6 +1321,7 @@
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1293,17 +1335,14 @@
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 CONFIG_USB_SL811_HCD=y
@@ -1348,10 +1387,6 @@
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1377,16 +1412,9 @@
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_EDAC=y
@@ -1425,6 +1453,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
@@ -1434,9 +1463,10 @@
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -1444,6 +1474,7 @@
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -1471,12 +1502,10 @@
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -1536,8 +1565,10 @@
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1629,7 +1660,6 @@
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1647,11 +1677,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1670,6 +1695,7 @@
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1682,9 +1708,9 @@
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-# CONFIG_FORCED_INLINING is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1710,7 +1736,9 @@
 CONFIG_ASYNC_XOR=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
@@ -1729,6 +1757,9 @@
 # CONFIG_CRYPTO_PCBC is not set
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1743,11 +1774,14 @@
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index f53d55b..f912168 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:37 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:15 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -855,8 +855,7 @@
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -1129,10 +1128,6 @@
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index 8fc8574..fdbfd39 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:41 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:19 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -717,8 +717,7 @@
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
 CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -931,10 +930,6 @@
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 11b4f6d..d3aee08 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -1387,12 +1387,14 @@
 #ifdef CONFIG_PPC_ISERIES
 BEGIN_FW_FTR_SECTION
 	ori	r4,r4,MSR_EE
+	li	r8,1
+	stb	r8,PACAHARDIRQEN(r13)
 END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
 #endif
 BEGIN_FW_FTR_SECTION
-	stb	r7,PACASOFTIRQEN(r13)
 	stb	r7,PACAHARDIRQEN(r13)
 END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
+	stb	r7,PACASOFTIRQEN(r13)
 
 	mtspr	SPRN_SRR0,r3
 	mtspr	SPRN_SRR1,r4
@@ -1520,15 +1522,14 @@
 #ifdef CONFIG_PPC_ISERIES
 BEGIN_FW_FTR_SECTION
 	mfmsr	r5
-	ori	r5,r5,MSR_EE		/* Hard Enabled */
+	ori	r5,r5,MSR_EE		/* Hard Enabled on iSeries*/
 	mtmsrd	r5
+	li	r5,1
 END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
 #endif
-BEGIN_FW_FTR_SECTION
-	stb	r5,PACAHARDIRQEN(r13)
-END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
+	stb	r5,PACAHARDIRQEN(r13)	/* Hard Disabled on others */
 
-	bl .start_kernel
+	bl	.start_kernel
 
 	/* Not reached */
 	BUG_OPCODE
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index b0e5deb..292163f 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -143,7 +143,6 @@
 		 */
 		if (local_paca->lppaca_ptr->int_dword.any_int)
 			iseries_handle_interrupts();
-		return;
 	}
 
 	/*
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 59311ec..4ec6055 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -241,8 +241,12 @@
 }
 #endif /* CONFIG_SMP */
 
+static DEFINE_PER_CPU(unsigned long, current_dabr);
+
 int set_dabr(unsigned long dabr)
 {
+	__get_cpu_var(current_dabr) = dabr;
+
 #ifdef CONFIG_PPC_MERGE		/* XXX for now */
 	if (ppc_md.set_dabr)
 		return ppc_md.set_dabr(dabr);
@@ -259,8 +263,6 @@
 DEFINE_PER_CPU(struct cpu_usage, cpu_usage_array);
 #endif
 
-static DEFINE_PER_CPU(unsigned long, current_dabr);
-
 struct task_struct *__switch_to(struct task_struct *prev,
 	struct task_struct *new)
 {
@@ -325,10 +327,8 @@
 
 #endif /* CONFIG_SMP */
 
-	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) {
+	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
 		set_dabr(new->thread.dabr);
-		__get_cpu_var(current_dabr) = new->thread.dabr;
-	}
 
 	new_thread = &new->thread;
 	old_thread = &current->thread;
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index f227659..538baf4 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -356,7 +356,7 @@
 
 	/* Enforce exclusive open with use count of PDE */
 	spin_lock(&flash_file_open_lock);
-	if (atomic_read(&dp->count) > 1) {
+	if (atomic_read(&dp->count) > 2) {
 		spin_unlock(&flash_file_open_lock);
 		return -EBUSY;
 	}
diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
index 7f830a4..e10d76a 100644
--- a/arch/powerpc/mm/hash_low_32.S
+++ b/arch/powerpc/mm/hash_low_32.S
@@ -44,6 +44,9 @@
 #ifdef CONFIG_SMP
 	.text
 _GLOBAL(hash_page_sync)
+	mfmsr   r10
+	rlwinm  r0,r10,0,17,15          /* clear bit 16 (MSR_EE) */
+	mtmsr   r0
 	lis	r8,mmu_hash_lock@h
 	ori	r8,r8,mmu_hash_lock@l
 	lis	r0,0x0fff
@@ -60,8 +63,9 @@
 	eieio
 	li	r0,0
 	stw	r0,0(r8)
-	blr	
-#endif
+	mtmsr	r10
+	blr
+#endif /* CONFIG_SMP */
 
 /*
  * Load a PTE into the hash table, if possible.
diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c
index 76ec1d1..9a93217 100644
--- a/arch/powerpc/oprofile/cell/vma_map.c
+++ b/arch/powerpc/oprofile/cell/vma_map.c
@@ -92,7 +92,7 @@
  * A pointer to the first vma_map in the generated list
  * of vma_maps is returned.  */
 struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
-					     unsigned long spu_elf_start)
+					     unsigned long __spu_elf_start)
 {
 	static const unsigned char expected[EI_PAD] = {
 		[EI_MAG0] = ELFMAG0,
@@ -107,9 +107,11 @@
 
 	int grd_val;
 	struct vma_to_fileoffset_map *map = NULL;
+	void __user *spu_elf_start = (void __user *)__spu_elf_start;
 	struct spu_overlay_info ovly;
 	unsigned int overlay_tbl_offset = -1;
-	unsigned long phdr_start, shdr_start;
+	Elf32_Phdr __user *phdr_start;
+	Elf32_Shdr __user *shdr_start;
 	Elf32_Ehdr ehdr;
 	Elf32_Phdr phdr;
 	Elf32_Shdr shdr, shdr_str;
@@ -121,12 +123,12 @@
 	unsigned int ovly_buf_table_sym = 0;
 	unsigned int ovly_table_end_sym = 0;
 	unsigned int ovly_buf_table_end_sym = 0;
-	unsigned long ovly_table;
+	struct spu_overlay_info __user *ovly_table;
 	unsigned int n_ovlys;
 
 	/* Get and validate ELF header.	 */
 
-	if (copy_from_user(&ehdr, (void *) spu_elf_start, sizeof (ehdr)))
+	if (copy_from_user(&ehdr, spu_elf_start, sizeof (ehdr)))
 		goto fail;
 
 	if (memcmp(ehdr.e_ident, expected, EI_PAD) != 0) {
@@ -152,9 +154,7 @@
 
 	/* Traverse program headers.  */
 	for (i = 0; i < ehdr.e_phnum; i++) {
-		if (copy_from_user(&phdr,
-				   (void *) (phdr_start + i * sizeof(phdr)),
-				   sizeof(phdr)))
+		if (copy_from_user(&phdr, phdr_start + i, sizeof(phdr)))
 			goto fail;
 
 		if (phdr.p_type != PT_LOAD)
@@ -171,9 +171,7 @@
 	pr_debug("SPU_PROF: Created non-overlay maps\n");
 	/* Traverse section table and search for overlay-related symbols.  */
 	for (i = 0; i < ehdr.e_shnum; i++) {
-		if (copy_from_user(&shdr,
-				   (void *) (shdr_start + i * sizeof(shdr)),
-				   sizeof(shdr)))
+		if (copy_from_user(&shdr, shdr_start + i, sizeof(shdr)))
 			goto fail;
 
 		if (shdr.sh_type != SHT_SYMTAB)
@@ -182,8 +180,7 @@
 			continue;
 
 		if (copy_from_user(&shdr_str,
-				   (void *) (shdr_start + shdr.sh_link *
-					     sizeof(shdr)),
+				   shdr_start + shdr.sh_link,
 				   sizeof(shdr)))
 			goto fail;
 
@@ -191,15 +188,15 @@
 			goto fail;;
 
 		for (j = 0; j < shdr.sh_size / sizeof (sym); j++) {
-			if (copy_from_user(&sym, (void *) (spu_elf_start +
-						       shdr.sh_offset + j *
-							   sizeof (sym)),
+			if (copy_from_user(&sym, spu_elf_start +
+						 shdr.sh_offset +
+						 j * sizeof (sym),
 					   sizeof (sym)))
 				goto fail;
 
-			if (copy_from_user(name, (void *)
-					   (spu_elf_start + shdr_str.sh_offset +
-					    sym.st_name),
+			if (copy_from_user(name, 
+					   spu_elf_start + shdr_str.sh_offset +
+					   sym.st_name,
 					   20))
 				goto fail;
 
@@ -245,9 +242,7 @@
 
 	/* Traverse overlay table.  */
 	for (i = 0; i < n_ovlys; i++) {
-		if (copy_from_user(&ovly, (void *)
-				   (ovly_table + i * sizeof (ovly)),
-				   sizeof (ovly)))
+		if (copy_from_user(&ovly, ovly_table + i, sizeof (ovly)))
 			goto fail;
 
 		/* The ovly.vma/size/offset arguments are analogous to the same
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index ca52b58..a977f20 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -763,7 +763,7 @@
 }
 #endif /* CONFIG_SMP */
 
-void xics_teardown_cpu()
+void xics_teardown_cpu(void)
 {
 	int cpu = smp_processor_id();
 
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index 7be7112..dd066bb 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -240,6 +240,7 @@
 	case CPM_CLK_SCC1:
 		reg = &im_cpmux->cmx_scr;
 		shift = 24;
+		break;
 	case CPM_CLK_SCC2:
 		reg = &im_cpmux->cmx_scr;
 		shift = 16;
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 1272048..8d2cd1d 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -72,9 +72,6 @@
 config SYS_SUPPORTS_PCI
 	bool
 
-config ARCH_MAY_HAVE_PC_FDC
-	bool
-
 config STACKTRACE_SUPPORT
 	def_bool y
 
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index 3dda24da..89b4086 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -44,7 +44,7 @@
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \
-		   -C none -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \
+		   -C gzip -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \
 		   -n 'Linux-$(KERNELRELEASE)' -d $< $@
 
 $(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE
diff --git a/arch/sh/kernel/cpu/sh2a/fpu.c b/arch/sh/kernel/cpu/sh2a/fpu.c
index ff99562..5627c0b 100644
--- a/arch/sh/kernel/cpu/sh2a/fpu.c
+++ b/arch/sh/kernel/cpu/sh2a/fpu.c
@@ -13,6 +13,7 @@
 #include <linux/signal.h>
 #include <asm/processor.h>
 #include <asm/io.h>
+#include <asm/fpu.h>
 
 /* The PR (precision) bit in the FP Status Register must be clear when
  * an frchg instruction is executed, otherwise the instruction is undefined.
diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c
index 817f993..8020796 100644
--- a/arch/sh/kernel/cpu/sh4/fpu.c
+++ b/arch/sh/kernel/cpu/sh4/fpu.c
@@ -16,6 +16,7 @@
 #include <asm/cpu/fpu.h>
 #include <asm/processor.h>
 #include <asm/system.h>
+#include <asm/fpu.h>
 
 /* The PR (precision) bit in the FP Status Register must be clear when
  * an frchg instruction is executed, otherwise the instruction is undefined.
diff --git a/arch/sh/kernel/cpu/sh5/fpu.c b/arch/sh/kernel/cpu/sh5/fpu.c
index 30b76a9..dd4f51f 100644
--- a/arch/sh/kernel/cpu/sh5/fpu.c
+++ b/arch/sh/kernel/cpu/sh5/fpu.c
@@ -17,6 +17,7 @@
 #include <asm/processor.h>
 #include <asm/user.h>
 #include <asm/io.h>
+#include <asm/fpu.h>
 
 /*
  * Initially load the FPU with signalling NANS.  This bit pattern
diff --git a/arch/sh/kernel/dump_task.c b/arch/sh/kernel/dump_task.c
index 4a8a4083..1db7ce0 100644
--- a/arch/sh/kernel/dump_task.c
+++ b/arch/sh/kernel/dump_task.c
@@ -1,5 +1,6 @@
 #include <linux/elfcore.h>
 #include <linux/sched.h>
+#include <asm/fpu.h>
 
 /*
  * Capture the user space registers if the task is not running (in user space)
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index 9ab1926..b98e37a 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -25,6 +25,7 @@
 #include <asm/pgalloc.h>
 #include <asm/system.h>
 #include <asm/ubc.h>
+#include <asm/fpu.h>
 
 static int hlt_counter;
 int ubc_usercnt = 0;
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index f6b5fbf..f311551 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -29,6 +29,7 @@
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/cacheflush.h>
+#include <asm/fpu.h>
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
diff --git a/arch/sparc/kernel/ptrace.c b/arch/sparc/kernel/ptrace.c
index 5b54f11..7f44ae6 100644
--- a/arch/sparc/kernel/ptrace.c
+++ b/arch/sparc/kernel/ptrace.c
@@ -325,7 +325,7 @@
 	const struct user_regset_view *view;
 	int ret;
 
-	view = task_user_regset_view(child);
+	view = task_user_regset_view(current);
 
 	switch(request) {
 	case PTRACE_GETREGS: {
diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig
index 250958d..9d4bd22 100644
--- a/arch/sparc64/defconfig
+++ b/arch/sparc64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc1
-# Sun Feb 17 22:44:12 2008
+# Linux kernel version: 2.6.25-rc3
+# Wed Mar 26 04:33:35 2008
 #
 CONFIG_SPARC=y
 CONFIG_SPARC64=y
@@ -55,9 +55,11 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=18
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -482,6 +484,7 @@
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -810,6 +813,7 @@
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
diff --git a/arch/sparc64/kernel/cpu.c b/arch/sparc64/kernel/cpu.c
index dd5d28e..0097c08 100644
--- a/arch/sparc64/kernel/cpu.c
+++ b/arch/sparc64/kernel/cpu.c
@@ -15,6 +15,8 @@
 #include <asm/spitfire.h>
 #include <asm/oplib.h>
 
+#include "entry.h"
+
 DEFINE_PER_CPU(cpuinfo_sparc, __cpu_data) = { 0 };
 
 struct cpu_iu_info {
@@ -65,8 +67,6 @@
 char *sparc_cpu_type;
 char *sparc_fpu_type;
 
-unsigned int fsr_storage;
-
 static void __init sun4v_cpu_probe(void)
 {
 	switch (sun4v_chip_type) {
@@ -94,8 +94,10 @@
 	unsigned long ver, fpu_vers, manuf, impl, fprs;
 	int i;
 	
-	if (tlb_type == hypervisor)
-		return sun4v_cpu_probe();
+	if (tlb_type == hypervisor) {
+		sun4v_cpu_probe();
+		return;
+	}
 
 	fprs = fprs_read();
 	fprs_write(FPRS_FEF);
diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S
index 6be4d2d..49eca4b 100644
--- a/arch/sparc64/kernel/entry.S
+++ b/arch/sparc64/kernel/entry.S
@@ -1705,6 +1705,36 @@
 2:	retl
 	 nop
 
+	/* Flush %fp and %i7 to the stack for all register
+	 * windows active inside of the cpu.  This allows
+	 * show_stack_trace() to avoid using an expensive
+	 * 'flushw'.
+	 */
+	.globl		stack_trace_flush
+	.type		stack_trace_flush,#function
+stack_trace_flush:
+	rdpr		%pstate, %o0
+	wrpr		%o0, PSTATE_IE, %pstate
+
+	rdpr		%cwp, %g1
+	rdpr		%canrestore, %g2
+	sub		%g1, 1, %g3
+
+1:	brz,pn		%g2, 2f
+	 sub		%g2, 1, %g2
+	wrpr		%g3, %cwp
+	stx		%fp, [%sp + STACK_BIAS + RW_V9_I6]
+	stx		%i7, [%sp + STACK_BIAS + RW_V9_I7]
+	ba,pt		%xcc, 1b
+	 sub		%g3, 1, %g3
+
+2:	wrpr		%g1, %cwp
+	wrpr		%o0, %pstate
+
+	retl
+	 nop
+	.size		stack_trace_flush,.-stack_trace_flush
+
 #ifdef CONFIG_SMP
 	.globl		hard_smp_processor_id
 hard_smp_processor_id:
diff --git a/arch/sparc64/kernel/entry.h b/arch/sparc64/kernel/entry.h
new file mode 100644
index 0000000..4a91e9c
--- /dev/null
+++ b/arch/sparc64/kernel/entry.h
@@ -0,0 +1,196 @@
+#ifndef _ENTRY_H
+#define _ENTRY_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+extern char *sparc_cpu_type;
+extern char *sparc_fpu_type;
+
+extern void __init per_cpu_patch(void);
+extern void __init sun4v_patch(void);
+extern void __init boot_cpu_id_too_large(int cpu);
+extern unsigned int dcache_parity_tl1_occurred;
+extern unsigned int icache_parity_tl1_occurred;
+
+extern asmlinkage void update_perfctrs(void);
+extern asmlinkage void sparc_breakpoint(struct pt_regs *regs);
+extern void timer_interrupt(int irq, struct pt_regs *regs);
+
+extern void do_notify_resume(struct pt_regs *regs,
+			     unsigned long orig_i0,
+			     int restart_syscall,
+			     unsigned long thread_info_flags);
+
+extern asmlinkage void syscall_trace(struct pt_regs *regs,
+				     int syscall_exit_p);
+
+extern void bad_trap_tl1(struct pt_regs *regs, long lvl);
+
+extern void do_fpe_common(struct pt_regs *regs);
+extern void do_fpieee(struct pt_regs *regs);
+extern void do_fpother(struct pt_regs *regs);
+extern void do_tof(struct pt_regs *regs);
+extern void do_div0(struct pt_regs *regs);
+extern void do_illegal_instruction(struct pt_regs *regs);
+extern void mem_address_unaligned(struct pt_regs *regs,
+				  unsigned long sfar,
+				  unsigned long sfsr);
+extern void sun4v_do_mna(struct pt_regs *regs,
+			 unsigned long addr,
+			 unsigned long type_ctx);
+extern void do_privop(struct pt_regs *regs);
+extern void do_privact(struct pt_regs *regs);
+extern void do_cee(struct pt_regs *regs);
+extern void do_cee_tl1(struct pt_regs *regs);
+extern void do_dae_tl1(struct pt_regs *regs);
+extern void do_iae_tl1(struct pt_regs *regs);
+extern void do_div0_tl1(struct pt_regs *regs);
+extern void do_fpdis_tl1(struct pt_regs *regs);
+extern void do_fpieee_tl1(struct pt_regs *regs);
+extern void do_fpother_tl1(struct pt_regs *regs);
+extern void do_ill_tl1(struct pt_regs *regs);
+extern void do_irq_tl1(struct pt_regs *regs);
+extern void do_lddfmna_tl1(struct pt_regs *regs);
+extern void do_stdfmna_tl1(struct pt_regs *regs);
+extern void do_paw(struct pt_regs *regs);
+extern void do_paw_tl1(struct pt_regs *regs);
+extern void do_vaw(struct pt_regs *regs);
+extern void do_vaw_tl1(struct pt_regs *regs);
+extern void do_tof_tl1(struct pt_regs *regs);
+extern void do_getpsr(struct pt_regs *regs);
+
+extern void spitfire_insn_access_exception(struct pt_regs *regs,
+					   unsigned long sfsr,
+					   unsigned long sfar);
+extern void spitfire_insn_access_exception_tl1(struct pt_regs *regs,
+					       unsigned long sfsr,
+					       unsigned long sfar);
+extern void spitfire_data_access_exception(struct pt_regs *regs,
+					   unsigned long sfsr,
+					   unsigned long sfar);
+extern void spitfire_data_access_exception_tl1(struct pt_regs *regs,
+					       unsigned long sfsr,
+					       unsigned long sfar);
+extern void spitfire_access_error(struct pt_regs *regs,
+				  unsigned long status_encoded,
+				  unsigned long afar);
+
+extern void cheetah_fecc_handler(struct pt_regs *regs,
+				 unsigned long afsr,
+				 unsigned long afar);
+extern void cheetah_cee_handler(struct pt_regs *regs,
+				unsigned long afsr,
+				unsigned long afar);
+extern void cheetah_deferred_handler(struct pt_regs *regs,
+				     unsigned long afsr,
+				     unsigned long afar);
+extern void cheetah_plus_parity_error(int type, struct pt_regs *regs);
+
+extern void sun4v_insn_access_exception(struct pt_regs *regs,
+					unsigned long addr,
+					unsigned long type_ctx);
+extern void sun4v_insn_access_exception_tl1(struct pt_regs *regs,
+					    unsigned long addr,
+					    unsigned long type_ctx);
+extern void sun4v_data_access_exception(struct pt_regs *regs,
+					unsigned long addr,
+					unsigned long type_ctx);
+extern void sun4v_data_access_exception_tl1(struct pt_regs *regs,
+					    unsigned long addr,
+					    unsigned long type_ctx);
+extern void sun4v_resum_error(struct pt_regs *regs,
+			      unsigned long offset);
+extern void sun4v_resum_overflow(struct pt_regs *regs);
+extern void sun4v_nonresum_error(struct pt_regs *regs,
+				 unsigned long offset);
+extern void sun4v_nonresum_overflow(struct pt_regs *regs);
+
+extern unsigned long sun4v_err_itlb_vaddr;
+extern unsigned long sun4v_err_itlb_ctx;
+extern unsigned long sun4v_err_itlb_pte;
+extern unsigned long sun4v_err_itlb_error;
+
+extern void sun4v_itlb_error_report(struct pt_regs *regs, int tl);
+
+extern unsigned long sun4v_err_dtlb_vaddr;
+extern unsigned long sun4v_err_dtlb_ctx;
+extern unsigned long sun4v_err_dtlb_pte;
+extern unsigned long sun4v_err_dtlb_error;
+
+extern void sun4v_dtlb_error_report(struct pt_regs *regs, int tl);
+extern void hypervisor_tlbop_error(unsigned long err,
+				   unsigned long op);
+extern void hypervisor_tlbop_error_xcall(unsigned long err,
+					 unsigned long op);
+
+/* WARNING: The error trap handlers in assembly know the precise
+ *	    layout of the following structure.
+ *
+ * C-level handlers in traps.c use this information to log the
+ * error and then determine how to recover (if possible).
+ */
+struct cheetah_err_info {
+/*0x00*/u64 afsr;
+/*0x08*/u64 afar;
+
+	/* D-cache state */
+/*0x10*/u64 dcache_data[4];	/* The actual data	*/
+/*0x30*/u64 dcache_index;	/* D-cache index	*/
+/*0x38*/u64 dcache_tag;		/* D-cache tag/valid	*/
+/*0x40*/u64 dcache_utag;	/* D-cache microtag	*/
+/*0x48*/u64 dcache_stag;	/* D-cache snooptag	*/
+
+	/* I-cache state */
+/*0x50*/u64 icache_data[8];	/* The actual insns + predecode	*/
+/*0x90*/u64 icache_index;	/* I-cache index	*/
+/*0x98*/u64 icache_tag;		/* I-cache phys tag	*/
+/*0xa0*/u64 icache_utag;	/* I-cache microtag	*/
+/*0xa8*/u64 icache_stag;	/* I-cache snooptag	*/
+/*0xb0*/u64 icache_upper;	/* I-cache upper-tag	*/
+/*0xb8*/u64 icache_lower;	/* I-cache lower-tag	*/
+
+	/* E-cache state */
+/*0xc0*/u64 ecache_data[4];	/* 32 bytes from staging registers */
+/*0xe0*/u64 ecache_index;	/* E-cache index	*/
+/*0xe8*/u64 ecache_tag;		/* E-cache tag/state	*/
+
+/*0xf0*/u64 __pad[32 - 30];
+};
+#define CHAFSR_INVALID		((u64)-1L)
+
+/* This is allocated at boot time based upon the largest hardware
+ * cpu ID in the system.  We allocate two entries per cpu, one for
+ * TL==0 logging and one for TL >= 1 logging.
+ */
+extern struct cheetah_err_info *cheetah_error_log;
+
+/* UPA nodes send interrupt packet to UltraSparc with first data reg
+ * value low 5 (7 on Starfire) bits holding the IRQ identifier being
+ * delivered.  We must translate this into a non-vector IRQ so we can
+ * set the softint on this cpu.
+ *
+ * To make processing these packets efficient and race free we use
+ * an array of irq buckets below.  The interrupt vector handler in
+ * entry.S feeds incoming packets into per-cpu pil-indexed lists.
+ *
+ * If you make changes to ino_bucket, please update hand coded assembler
+ * of the vectored interrupt trap handler(s) in entry.S and sun4v_ivec.S
+ */
+struct ino_bucket {
+/*0x00*/unsigned long __irq_chain_pa;
+
+	/* Virtual interrupt number assigned to this INO.  */
+/*0x08*/unsigned int __virt_irq;
+/*0x0c*/unsigned int __pad;
+};
+
+extern struct ino_bucket *ivector_table;
+extern unsigned long ivector_table_pa;
+
+extern void handler_irq(int irq, struct pt_regs *regs);
+extern void init_irqwork_curcpu(void);
+extern void __cpuinit sun4v_register_mondo_queues(int this_cpu);
+
+#endif /* _ENTRY_H */
diff --git a/arch/sparc64/kernel/iommu.c b/arch/sparc64/kernel/iommu.c
index fbaab34..756fa24 100644
--- a/arch/sparc64/kernel/iommu.c
+++ b/arch/sparc64/kernel/iommu.c
@@ -516,9 +516,11 @@
 	unsigned long flags, handle, prot, ctx;
 	dma_addr_t dma_next = 0, dma_addr;
 	unsigned int max_seg_size;
+	unsigned long seg_boundary_size;
 	int outcount, incount, i;
 	struct strbuf *strbuf;
 	struct iommu *iommu;
+	unsigned long base_shift;
 
 	BUG_ON(direction == DMA_NONE);
 
@@ -549,8 +551,11 @@
 	outs->dma_length = 0;
 
 	max_seg_size = dma_get_max_seg_size(dev);
+	seg_boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1,
+				  IO_PAGE_SIZE) >> IO_PAGE_SHIFT;
+	base_shift = iommu->page_table_map_base >> IO_PAGE_SHIFT;
 	for_each_sg(sglist, s, nelems, i) {
-		unsigned long paddr, npages, entry, slen;
+		unsigned long paddr, npages, entry, out_entry = 0, slen;
 		iopte_t *base;
 
 		slen = s->length;
@@ -593,7 +598,9 @@
 			 * - allocated dma_addr isn't contiguous to previous allocation
 			 */
 			if ((dma_addr != dma_next) ||
-			    (outs->dma_length + s->length > max_seg_size)) {
+			    (outs->dma_length + s->length > max_seg_size) ||
+			    (is_span_boundary(out_entry, base_shift,
+					      seg_boundary_size, outs, s))) {
 				/* Can't merge: create a new segment */
 				segstart = s;
 				outcount++;
@@ -607,6 +614,7 @@
 			/* This is a new segment, fill entries */
 			outs->dma_address = dma_addr;
 			outs->dma_length = slen;
+			out_entry = entry;
 		}
 
 		/* Calculate next page pointer for contiguous check */
@@ -626,7 +634,7 @@
 iommu_map_failed:
 	for_each_sg(sglist, s, nelems, i) {
 		if (s->dma_length != 0) {
-			unsigned long vaddr, npages, entry, i;
+			unsigned long vaddr, npages, entry, j;
 			iopte_t *base;
 
 			vaddr = s->dma_address & IO_PAGE_MASK;
@@ -637,8 +645,8 @@
 				>> IO_PAGE_SHIFT;
 			base = iommu->page_table + entry;
 
-			for (i = 0; i < npages; i++)
-				iopte_make_dummy(iommu, base + i);
+			for (j = 0; j < npages; j++)
+				iopte_make_dummy(iommu, base + j);
 
 			s->dma_address = DMA_ERROR_CODE;
 			s->dma_length = 0;
@@ -803,7 +811,7 @@
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
-const struct dma_ops sun4u_dma_ops = {
+static const struct dma_ops sun4u_dma_ops = {
 	.alloc_coherent		= dma_4u_alloc_coherent,
 	.free_coherent		= dma_4u_free_coherent,
 	.map_single		= dma_4u_map_single,
diff --git a/arch/sparc64/kernel/iommu_common.h b/arch/sparc64/kernel/iommu_common.h
index 0713bd5..f3575a6 100644
--- a/arch/sparc64/kernel/iommu_common.h
+++ b/arch/sparc64/kernel/iommu_common.h
@@ -12,6 +12,7 @@
 #include <linux/mm.h>
 #include <linux/scatterlist.h>
 #include <linux/device.h>
+#include <linux/iommu-helper.h>
 
 #include <asm/iommu.h>
 #include <asm/scatterlist.h>
@@ -45,17 +46,16 @@
 	return npages;
 }
 
-static inline unsigned long calc_npages(struct scatterlist *sglist, int nelems)
+static inline int is_span_boundary(unsigned long entry,
+				   unsigned long shift,
+				   unsigned long boundary_size,
+				   struct scatterlist *outs,
+				   struct scatterlist *sg)
 {
-	unsigned long i, npages = 0;
-	struct scatterlist *sg;
+	unsigned long paddr = SG_ENT_PHYS_ADDRESS(outs);
+	int nr = iommu_num_pages(paddr, outs->dma_length + sg->length);
 
-	for_each_sg(sglist, sg, nelems, i) {
-		unsigned long paddr = SG_ENT_PHYS_ADDRESS(sg);
-		npages += iommu_num_pages(paddr, sg->length);
-	}
-
-	return npages;
+	return iommu_is_span_boundary(entry, nr, shift, boundary_size);
 }
 
 extern unsigned long iommu_range_alloc(struct device *dev,
diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c
index 5ec06c8..eb88bd6 100644
--- a/arch/sparc64/kernel/irq.c
+++ b/arch/sparc64/kernel/irq.c
@@ -44,27 +44,10 @@
 #include <asm/hypervisor.h>
 #include <asm/cacheflush.h>
 
-/* UPA nodes send interrupt packet to UltraSparc with first data reg
- * value low 5 (7 on Starfire) bits holding the IRQ identifier being
- * delivered.  We must translate this into a non-vector IRQ so we can
- * set the softint on this cpu.
- *
- * To make processing these packets efficient and race free we use
- * an array of irq buckets below.  The interrupt vector handler in
- * entry.S feeds incoming packets into per-cpu pil-indexed lists.
- *
- * If you make changes to ino_bucket, please update hand coded assembler
- * of the vectored interrupt trap handler(s) in entry.S and sun4v_ivec.S
- */
-struct ino_bucket {
-/*0x00*/unsigned long __irq_chain_pa;
-
-	/* Virtual interrupt number assigned to this INO.  */
-/*0x08*/unsigned int __virt_irq;
-/*0x0c*/unsigned int __pad;
-};
+#include "entry.h"
 
 #define NUM_IVECS	(IMAP_INR + 1)
+
 struct ino_bucket *ivector_table;
 unsigned long ivector_table_pa;
 
diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c
index ddca6c6..0183970 100644
--- a/arch/sparc64/kernel/pci_sun4v.c
+++ b/arch/sparc64/kernel/pci_sun4v.c
@@ -335,8 +335,10 @@
 	unsigned long flags, handle, prot;
 	dma_addr_t dma_next = 0, dma_addr;
 	unsigned int max_seg_size;
+	unsigned long seg_boundary_size;
 	int outcount, incount, i;
 	struct iommu *iommu;
+	unsigned long base_shift;
 	long err;
 
 	BUG_ON(direction == DMA_NONE);
@@ -362,8 +364,11 @@
 	iommu_batch_start(dev, prot, ~0UL);
 
 	max_seg_size = dma_get_max_seg_size(dev);
+	seg_boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1,
+				  IO_PAGE_SIZE) >> IO_PAGE_SHIFT;
+	base_shift = iommu->page_table_map_base >> IO_PAGE_SHIFT;
 	for_each_sg(sglist, s, nelems, i) {
-		unsigned long paddr, npages, entry, slen;
+		unsigned long paddr, npages, entry, out_entry = 0, slen;
 
 		slen = s->length;
 		/* Sanity check */
@@ -406,7 +411,9 @@
 			 * - allocated dma_addr isn't contiguous to previous allocation
 			 */
 			if ((dma_addr != dma_next) ||
-			    (outs->dma_length + s->length > max_seg_size)) {
+			    (outs->dma_length + s->length > max_seg_size) ||
+			    (is_span_boundary(out_entry, base_shift,
+					      seg_boundary_size, outs, s))) {
 				/* Can't merge: create a new segment */
 				segstart = s;
 				outcount++;
@@ -420,6 +427,7 @@
 			/* This is a new segment, fill entries */
 			outs->dma_address = dma_addr;
 			outs->dma_length = slen;
+			out_entry = entry;
 		}
 
 		/* Calculate next page pointer for contiguous check */
diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c
index 9a1ba1f..e9fc0aa 100644
--- a/arch/sparc64/kernel/ptrace.c
+++ b/arch/sparc64/kernel/ptrace.c
@@ -35,6 +35,9 @@
 #include <asm/spitfire.h>
 #include <asm/page.h>
 #include <asm/cpudata.h>
+#include <asm/cacheflush.h>
+
+#include "entry.h"
 
 /* #define ALLOW_INIT_TRACING */
 
@@ -67,6 +70,8 @@
 	if (tlb_type == hypervisor)
 		return;
 
+	preempt_disable();
+
 #ifdef DCACHE_ALIASING_POSSIBLE
 	/* If bit 13 of the kernel address we used to access the
 	 * user page is the same as the virtual address that page
@@ -105,6 +110,87 @@
 		for (; start < end; start += icache_line_size)
 			flushi(start);
 	}
+
+	preempt_enable();
+}
+
+static int get_from_target(struct task_struct *target, unsigned long uaddr,
+			   void *kbuf, int len)
+{
+	if (target == current) {
+		if (copy_from_user(kbuf, (void __user *) uaddr, len))
+			return -EFAULT;
+	} else {
+		int len2 = access_process_vm(target, uaddr, kbuf, len, 0);
+		if (len2 != len)
+			return -EFAULT;
+	}
+	return 0;
+}
+
+static int set_to_target(struct task_struct *target, unsigned long uaddr,
+			 void *kbuf, int len)
+{
+	if (target == current) {
+		if (copy_to_user((void __user *) uaddr, kbuf, len))
+			return -EFAULT;
+	} else {
+		int len2 = access_process_vm(target, uaddr, kbuf, len, 1);
+		if (len2 != len)
+			return -EFAULT;
+	}
+	return 0;
+}
+
+static int regwindow64_get(struct task_struct *target,
+			   const struct pt_regs *regs,
+			   struct reg_window *wbuf)
+{
+	unsigned long rw_addr = regs->u_regs[UREG_I6];
+
+	if (test_tsk_thread_flag(current, TIF_32BIT)) {
+		struct reg_window32 win32;
+		int i;
+
+		if (get_from_target(target, rw_addr, &win32, sizeof(win32)))
+			return -EFAULT;
+		for (i = 0; i < 8; i++)
+			wbuf->locals[i] = win32.locals[i];
+		for (i = 0; i < 8; i++)
+			wbuf->ins[i] = win32.ins[i];
+	} else {
+		rw_addr += STACK_BIAS;
+		if (get_from_target(target, rw_addr, wbuf, sizeof(*wbuf)))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int regwindow64_set(struct task_struct *target,
+			   const struct pt_regs *regs,
+			   struct reg_window *wbuf)
+{
+	unsigned long rw_addr = regs->u_regs[UREG_I6];
+
+	if (test_tsk_thread_flag(current, TIF_32BIT)) {
+		struct reg_window32 win32;
+		int i;
+
+		for (i = 0; i < 8; i++)
+			win32.locals[i] = wbuf->locals[i];
+		for (i = 0; i < 8; i++)
+			win32.ins[i] = wbuf->ins[i];
+
+		if (set_to_target(target, rw_addr, &win32, sizeof(win32)))
+			return -EFAULT;
+	} else {
+		rw_addr += STACK_BIAS;
+		if (set_to_target(target, rw_addr, wbuf, sizeof(*wbuf)))
+			return -EFAULT;
+	}
+
+	return 0;
 }
 
 enum sparc_regset {
@@ -126,16 +212,13 @@
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				  regs->u_regs,
 				  0, 16 * sizeof(u64));
-	if (!ret) {
-		unsigned long __user *reg_window = (unsigned long __user *)
-			(regs->u_regs[UREG_I6] + STACK_BIAS);
-		unsigned long window[16];
+	if (!ret && count && pos < (32 * sizeof(u64))) {
+		struct reg_window window;
 
-		if (copy_from_user(window, reg_window, sizeof(window)))
+		if (regwindow64_get(target, regs, &window))
 			return -EFAULT;
-
 		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-					  window,
+					  &window,
 					  16 * sizeof(u64),
 					  32 * sizeof(u64));
 	}
@@ -157,10 +240,11 @@
 					  36 * sizeof(u64));
 	}
 
-	if (!ret)
+	if (!ret) {
 		ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
 					       36 * sizeof(u64), -1);
 
+	}
 	return ret;
 }
 
@@ -178,20 +262,19 @@
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 regs->u_regs,
 				 0, 16 * sizeof(u64));
-	if (!ret && count > 0) {
-		unsigned long __user *reg_window = (unsigned long __user *)
-			(regs->u_regs[UREG_I6] + STACK_BIAS);
-		unsigned long window[16];
+	if (!ret && count && pos < (32 * sizeof(u64))) {
+		struct reg_window window;
 
-		if (copy_from_user(window, reg_window, sizeof(window)))
+		if (regwindow64_get(target, regs, &window))
 			return -EFAULT;
 
 		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-					 window,
+					 &window,
 					 16 * sizeof(u64),
 					 32 * sizeof(u64));
+
 		if (!ret &&
-		    copy_to_user(reg_window, window, sizeof(window)))
+		    regwindow64_set(target, regs, &window))
 			return -EFAULT;
 	}
 
@@ -382,6 +465,7 @@
 	.regsets = sparc64_regsets, .n = ARRAY_SIZE(sparc64_regsets)
 };
 
+#ifdef CONFIG_COMPAT
 static int genregs32_get(struct task_struct *target,
 			 const struct user_regset *regset,
 			 unsigned int pos, unsigned int count,
@@ -404,9 +488,22 @@
 			*k++ = regs->u_regs[pos++];
 
 		reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
-		for (; count > 0 && pos < 32; count--) {
-			if (get_user(*k++, &reg_window[pos++]))
-				return -EFAULT;
+		if (target == current) {
+			for (; count > 0 && pos < 32; count--) {
+				if (get_user(*k++, &reg_window[pos++]))
+					return -EFAULT;
+			}
+		} else {
+			for (; count > 0 && pos < 32; count--) {
+				if (access_process_vm(target,
+						      (unsigned long)
+						      &reg_window[pos],
+						      k, sizeof(*k), 0)
+				    != sizeof(*k))
+					return -EFAULT;
+				k++;
+				pos++;
+			}
 		}
 	} else {
 		for (; count > 0 && pos < 16; count--) {
@@ -415,10 +512,28 @@
 		}
 
 		reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
-		for (; count > 0 && pos < 32; count--) {
-			if (get_user(reg, &reg_window[pos++]) ||
-			    put_user(reg, u++))
-				return -EFAULT;
+		if (target == current) {
+			for (; count > 0 && pos < 32; count--) {
+				if (get_user(reg, &reg_window[pos++]) ||
+				    put_user(reg, u++))
+					return -EFAULT;
+			}
+		} else {
+			for (; count > 0 && pos < 32; count--) {
+				if (access_process_vm(target,
+						      (unsigned long)
+						      &reg_window[pos],
+						      &reg, sizeof(reg), 0)
+				    != sizeof(reg))
+					return -EFAULT;
+				if (access_process_vm(target,
+						      (unsigned long) u,
+						      &reg, sizeof(reg), 1)
+				    != sizeof(reg))
+					return -EFAULT;
+				pos++;
+				u++;
+			}
 		}
 	}
 	while (count > 0) {
@@ -480,9 +595,23 @@
 			regs->u_regs[pos++] = *k++;
 
 		reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
-		for (; count > 0 && pos < 32; count--) {
-			if (put_user(*k++, &reg_window[pos++]))
-				return -EFAULT;
+		if (target == current) {
+			for (; count > 0 && pos < 32; count--) {
+				if (put_user(*k++, &reg_window[pos++]))
+					return -EFAULT;
+			}
+		} else {
+			for (; count > 0 && pos < 32; count--) {
+				if (access_process_vm(target,
+						      (unsigned long)
+						      &reg_window[pos],
+						      (void *) k,
+						      sizeof(*k), 1)
+				    != sizeof(*k))
+					return -EFAULT;
+				k++;
+				pos++;
+			}
 		}
 	} else {
 		for (; count > 0 && pos < 16; count--) {
@@ -492,10 +621,29 @@
 		}
 
 		reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
-		for (; count > 0 && pos < 32; count--) {
-			if (get_user(reg, u++) ||
-			    put_user(reg, &reg_window[pos++]))
-				return -EFAULT;
+		if (target == current) {
+			for (; count > 0 && pos < 32; count--) {
+				if (get_user(reg, u++) ||
+				    put_user(reg, &reg_window[pos++]))
+					return -EFAULT;
+			}
+		} else {
+			for (; count > 0 && pos < 32; count--) {
+				if (access_process_vm(target,
+						      (unsigned long)
+						      u,
+						      &reg, sizeof(reg), 0)
+				    != sizeof(reg))
+					return -EFAULT;
+				if (access_process_vm(target,
+						      (unsigned long)
+						      &reg_window[pos],
+						      &reg, sizeof(reg), 1)
+				    != sizeof(reg))
+					return -EFAULT;
+				pos++;
+				u++;
+			}
 		}
 	}
 	while (count > 0) {
@@ -676,14 +824,18 @@
 	.name = "sparc", .e_machine = EM_SPARC,
 	.regsets = sparc32_regsets, .n = ARRAY_SIZE(sparc32_regsets)
 };
+#endif /* CONFIG_COMPAT */
 
 const struct user_regset_view *task_user_regset_view(struct task_struct *task)
 {
+#ifdef CONFIG_COMPAT
 	if (test_tsk_thread_flag(task, TIF_32BIT))
 		return &user_sparc32_view;
+#endif
 	return &user_sparc64_view;
 }
 
+#ifdef CONFIG_COMPAT
 struct compat_fps {
 	unsigned int regs[32];
 	unsigned int fsr;
@@ -699,7 +851,7 @@
 long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			compat_ulong_t caddr, compat_ulong_t cdata)
 {
-	const struct user_regset_view *view = task_user_regset_view(child);
+	const struct user_regset_view *view = task_user_regset_view(current);
 	compat_ulong_t caddr2 = task_pt_regs(current)->u_regs[UREG_I4];
 	struct pt_regs32 __user *pregs;
 	struct compat_fps __user *fps;
@@ -798,6 +950,7 @@
 
 	return ret;
 }
+#endif /* CONFIG_COMPAT */
 
 struct fps {
 	unsigned int regs[64];
@@ -806,12 +959,15 @@
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
-	const struct user_regset_view *view = task_user_regset_view(child);
-	struct pt_regs __user *pregs = (struct pt_regs __user *) addr;
+	const struct user_regset_view *view = task_user_regset_view(current);
 	unsigned long addr2 = task_pt_regs(current)->u_regs[UREG_I4];
-	struct fps __user *fps = (struct fps __user *) addr;
+	struct pt_regs __user *pregs;
+	struct fps __user *fps;
 	int ret;
 
+	pregs = (struct pt_regs __user *) (unsigned long) addr;
+	fps = (struct fps __user *) (unsigned long) addr;
+
 	switch (request) {
 	case PTRACE_PEEKUSR:
 		ret = (addr != 0) ? -EIO : 0;
diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c
index d036dbe..6acb4c5 100644
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@@ -51,6 +51,8 @@
 #include <net/ipconfig.h>
 #endif
 
+#include "entry.h"
+
 /* Used to synchronize accesses to NatSemi SUPER I/O chip configure
  * operations in asm/ns87303.h
  */
@@ -335,9 +337,6 @@
 
 /* BUFFER is PAGE_SIZE bytes long. */
 
-extern char *sparc_cpu_type;
-extern char *sparc_fpu_type;
-
 extern void smp_info(struct seq_file *);
 extern void smp_bogo(struct seq_file *);
 extern void mmu_info(struct seq_file *);
diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c
index fb13775..9d51956 100644
--- a/arch/sparc64/kernel/signal.c
+++ b/arch/sparc64/kernel/signal.c
@@ -32,6 +32,9 @@
 #include <asm/siginfo.h>
 #include <asm/visasm.h>
 
+#include "entry.h"
+#include "systbls.h"
+
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
 /* {set, get}context() needed for 64-bit SparcLinux userland. */
@@ -354,7 +357,7 @@
 static inline int
 save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
 {
-	unsigned long *fpregs = (unsigned long *)(regs+1);
+	unsigned long *fpregs = current_thread_info()->fpregs;
 	unsigned long fprs;
 	int err = 0;
 	
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index 5a1126b..59f020d 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -1,6 +1,6 @@
 /* smp.c: Sparc64 SMP support.
  *
- * Copyright (C) 1997, 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1997, 2007, 2008 David S. Miller (davem@davemloft.net)
  */
 
 #include <linux/module.h>
@@ -30,6 +30,7 @@
 #include <asm/cpudata.h>
 #include <asm/hvtramp.h>
 #include <asm/io.h>
+#include <asm/timer.h>
 
 #include <asm/irq.h>
 #include <asm/irq_regs.h>
diff --git a/arch/sparc64/kernel/stacktrace.c b/arch/sparc64/kernel/stacktrace.c
index 47f92a5..84d39e8 100644
--- a/arch/sparc64/kernel/stacktrace.c
+++ b/arch/sparc64/kernel/stacktrace.c
@@ -2,13 +2,15 @@
 #include <linux/stacktrace.h>
 #include <linux/thread_info.h>
 #include <asm/ptrace.h>
+#include <asm/stacktrace.h>
 
 void save_stack_trace(struct stack_trace *trace)
 {
 	unsigned long ksp, fp, thread_base;
 	struct thread_info *tp = task_thread_info(current);
 
-	flushw_all();
+	stack_trace_flush();
+
 	__asm__ __volatile__(
 		"mov	%%fp, %0"
 		: "=r" (ksp)
diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c
index 134d801..f952745 100644
--- a/arch/sparc64/kernel/sys_sparc.c
+++ b/arch/sparc64/kernel/sys_sparc.c
@@ -1,5 +1,4 @@
-/* $Id: sys_sparc.c,v 1.57 2002/02/09 19:49:30 davem Exp $
- * linux/arch/sparc64/kernel/sys_sparc.c
+/* linux/arch/sparc64/kernel/sys_sparc.c
  *
  * This file contains various random system calls that
  * have a non-standard calling sequence on the Linux/sparc
@@ -30,6 +29,9 @@
 #include <asm/perfctr.h>
 #include <asm/unistd.h>
 
+#include "entry.h"
+#include "systbls.h"
+
 /* #define DEBUG_UNIMP_SYSCALL */
 
 asmlinkage unsigned long sys_getpagesize(void)
@@ -445,7 +447,8 @@
 			goto out;
 		case SEMTIMEDOP:
 			err = sys_semtimedop(first, ptr, (unsigned)second,
-				(const struct timespec __user *) fifth);
+				(const struct timespec __user *)
+					     (unsigned long) fifth);
 			goto out;
 		case SEMGET:
 			err = sys_semget(first, (int)second, (int)third);
@@ -788,7 +791,7 @@
 	} else {
 		if ((utrap_handler_t)current_thread_info()->utraps[type] != new_p &&
 		    current_thread_info()->utraps[0] > 1) {
-			long *p = current_thread_info()->utraps;
+			unsigned long *p = current_thread_info()->utraps;
 
 			current_thread_info()->utraps =
 				kmalloc((UT_TRAP_INSTRUCTION_31+1)*sizeof(long),
@@ -816,7 +819,8 @@
 	return 0;
 }
 
-long sparc_memory_ordering(unsigned long model, struct pt_regs *regs)
+asmlinkage long sparc_memory_ordering(unsigned long model,
+				      struct pt_regs *regs)
 {
 	if (model >= 3)
 		return -EINVAL;
diff --git a/arch/sparc64/kernel/systbls.h b/arch/sparc64/kernel/systbls.h
new file mode 100644
index 0000000..8a0d20a
--- /dev/null
+++ b/arch/sparc64/kernel/systbls.h
@@ -0,0 +1,53 @@
+#ifndef _SYSTBLS_H
+#define _SYSTBLS_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/utsname.h>
+#include <asm/utrap.h>
+#include <asm/signal.h>
+
+extern asmlinkage unsigned long sys_getpagesize(void);
+extern asmlinkage unsigned long sparc_brk(unsigned long brk);
+extern asmlinkage long sparc_pipe(struct pt_regs *regs);
+extern asmlinkage long sys_ipc(unsigned int call, int first,
+			       unsigned long second,
+			       unsigned long third,
+			       void __user *ptr, long fifth);
+extern asmlinkage long sparc64_newuname(struct new_utsname __user *name);
+extern asmlinkage long sparc64_personality(unsigned long personality);
+extern asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
+					 unsigned long prot, unsigned long flags,
+					 unsigned long fd, unsigned long off);
+extern asmlinkage long sys64_munmap(unsigned long addr, size_t len);
+extern asmlinkage unsigned long sys64_mremap(unsigned long addr,
+					     unsigned long old_len,
+					     unsigned long new_len,
+					     unsigned long flags,
+					     unsigned long new_addr);
+extern asmlinkage unsigned long c_sys_nis_syscall(struct pt_regs *regs);
+extern asmlinkage long sys_getdomainname(char __user *name, int len);
+extern asmlinkage long solaris_syscall(struct pt_regs *regs);
+extern asmlinkage long sunos_syscall(struct pt_regs *regs);
+extern asmlinkage long sys_utrap_install(utrap_entry_t type,
+					 utrap_handler_t new_p,
+					 utrap_handler_t new_d,
+					 utrap_handler_t __user *old_p,
+					 utrap_handler_t __user *old_d);
+extern asmlinkage long sparc_memory_ordering(unsigned long model,
+					     struct pt_regs *regs);
+extern asmlinkage long sys_rt_sigaction(int sig,
+					const struct sigaction __user *act,
+					struct sigaction __user *oact,
+					void __user *restorer,
+					size_t sigsetsize);
+extern asmlinkage long sys_perfctr(int opcode, unsigned long arg0,
+				   unsigned long arg1, unsigned long arg2);
+
+extern asmlinkage void sparc64_set_context(struct pt_regs *regs);
+extern asmlinkage void sparc64_get_context(struct pt_regs *regs);
+extern asmlinkage long sys_sigpause(unsigned int set);
+extern asmlinkage long sys_sigsuspend(old_sigset_t set);
+extern void do_rt_sigreturn(struct pt_regs *regs);
+
+#endif /* _SYSTBLS_H */
diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c
index d204f1a..e5d2389 100644
--- a/arch/sparc64/kernel/time.c
+++ b/arch/sparc64/kernel/time.c
@@ -1,7 +1,6 @@
-/* $Id: time.c,v 1.42 2002/01/23 14:33:55 davem Exp $
- * time.c: UltraSparc timer and TOD clock support.
+/* time.c: UltraSparc timer and TOD clock support.
  *
- * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1997, 2008 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1998 Eddie C. Dost   (ecd@skynet.be)
  *
  * Based largely on code which is:
@@ -48,6 +47,8 @@
 #include <asm/uaccess.h>
 #include <asm/irq_regs.h>
 
+#include "entry.h"
+
 DEFINE_SPINLOCK(mostek_lock);
 DEFINE_SPINLOCK(rtc_lock);
 void __iomem *mstk48t02_regs = NULL;
@@ -508,6 +509,37 @@
 	return (data1 == data2);	/* Was the write blocked? */
 }
 
+static void __init mostek_set_system_time(void __iomem *mregs)
+{
+	unsigned int year, mon, day, hour, min, sec;
+	u8 tmp;
+
+	spin_lock_irq(&mostek_lock);
+
+	/* Traditional Mostek chip. */
+	tmp = mostek_read(mregs + MOSTEK_CREG);
+	tmp |= MSTK_CREG_READ;
+	mostek_write(mregs + MOSTEK_CREG, tmp);
+
+	sec = MSTK_REG_SEC(mregs);
+	min = MSTK_REG_MIN(mregs);
+	hour = MSTK_REG_HOUR(mregs);
+	day = MSTK_REG_DOM(mregs);
+	mon = MSTK_REG_MONTH(mregs);
+	year = MSTK_CVT_YEAR( MSTK_REG_YEAR(mregs) );
+
+	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
+	xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
+	set_normalized_timespec(&wall_to_monotonic,
+ 	                        -xtime.tv_sec, -xtime.tv_nsec);
+
+	tmp = mostek_read(mregs + MOSTEK_CREG);
+	tmp &= ~MSTK_CREG_READ;
+	mostek_write(mregs + MOSTEK_CREG, tmp);
+
+	spin_unlock_irq(&mostek_lock);
+}
+
 /* Probe for the real time clock chip. */
 static void __init set_system_time(void)
 {
@@ -520,7 +552,6 @@
 	unsigned long dregs = 0UL;
 	void __iomem *bregs = 0UL;
 #endif
-	u8 tmp;
 
 	if (!mregs && !dregs && !bregs) {
 		prom_printf("Something wrong, clock regs not mapped yet.\n");
@@ -528,20 +559,11 @@
 	}		
 
 	if (mregs) {
-		spin_lock_irq(&mostek_lock);
+		mostek_set_system_time(mregs);
+		return;
+	}
 
-		/* Traditional Mostek chip. */
-		tmp = mostek_read(mregs + MOSTEK_CREG);
-		tmp |= MSTK_CREG_READ;
-		mostek_write(mregs + MOSTEK_CREG, tmp);
-
-		sec = MSTK_REG_SEC(mregs);
-		min = MSTK_REG_MIN(mregs);
-		hour = MSTK_REG_HOUR(mregs);
-		day = MSTK_REG_DOM(mregs);
-		mon = MSTK_REG_MONTH(mregs);
-		year = MSTK_CVT_YEAR( MSTK_REG_YEAR(mregs) );
-	} else if (bregs) {
+	if (bregs) {
 		unsigned char val = readb(bregs + 0x0e);
 		unsigned int century;
 
@@ -596,14 +618,6 @@
 	xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
 	set_normalized_timespec(&wall_to_monotonic,
  	                        -xtime.tv_sec, -xtime.tv_nsec);
-
-	if (mregs) {
-		tmp = mostek_read(mregs + MOSTEK_CREG);
-		tmp &= ~MSTK_CREG_READ;
-		mostek_write(mregs + MOSTEK_CREG, tmp);
-
-		spin_unlock_irq(&mostek_lock);
-	}
 }
 
 /* davem suggests we keep this within the 4M locked kernel image */
@@ -1027,7 +1041,7 @@
 	setup_clockevent_multiplier(clock);
 
 	sparc64_clockevent.max_delta_ns =
-		clockevent_delta2ns(0x7fffffffffffffff, &sparc64_clockevent);
+		clockevent_delta2ns(0x7fffffffffffffffUL, &sparc64_clockevent);
 	sparc64_clockevent.min_delta_ns =
 		clockevent_delta2ns(0xF, &sparc64_clockevent);
 
diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c
index 007f531..96da847 100644
--- a/arch/sparc64/kernel/traps.c
+++ b/arch/sparc64/kernel/traps.c
@@ -42,6 +42,7 @@
 #endif
 #include <asm/prom.h>
 
+#include "entry.h"
 
 /* When an irrecoverable trap occurs at tl > 0, the trap entry
  * code logs the trap state registers at every level in the trap
@@ -77,11 +78,6 @@
 	}
 }
 
-void do_call_debug(struct pt_regs *regs) 
-{ 
-	notify_die(DIE_CALL, "debug call", regs, 0, 255, SIGINT); 
-}
-
 void bad_trap(struct pt_regs *regs, long lvl)
 {
 	char buffer[32];
@@ -550,41 +546,6 @@
 static unsigned long ecache_flush_linesize;
 static unsigned long ecache_flush_size;
 
-/* WARNING: The error trap handlers in assembly know the precise
- *	    layout of the following structure.
- *
- * C-level handlers below use this information to log the error
- * and then determine how to recover (if possible).
- */
-struct cheetah_err_info {
-/*0x00*/u64 afsr;
-/*0x08*/u64 afar;
-
-	/* D-cache state */
-/*0x10*/u64 dcache_data[4];	/* The actual data	*/
-/*0x30*/u64 dcache_index;	/* D-cache index	*/
-/*0x38*/u64 dcache_tag;		/* D-cache tag/valid	*/
-/*0x40*/u64 dcache_utag;	/* D-cache microtag	*/
-/*0x48*/u64 dcache_stag;	/* D-cache snooptag	*/
-
-	/* I-cache state */
-/*0x50*/u64 icache_data[8];	/* The actual insns + predecode	*/
-/*0x90*/u64 icache_index;	/* I-cache index	*/
-/*0x98*/u64 icache_tag;		/* I-cache phys tag	*/
-/*0xa0*/u64 icache_utag;	/* I-cache microtag	*/
-/*0xa8*/u64 icache_stag;	/* I-cache snooptag	*/
-/*0xb0*/u64 icache_upper;	/* I-cache upper-tag	*/
-/*0xb8*/u64 icache_lower;	/* I-cache lower-tag	*/
-
-	/* E-cache state */
-/*0xc0*/u64 ecache_data[4];	/* 32 bytes from staging registers */
-/*0xe0*/u64 ecache_index;	/* E-cache index	*/
-/*0xe8*/u64 ecache_tag;		/* E-cache tag/state	*/
-
-/*0xf0*/u64 __pad[32 - 30];
-};
-#define CHAFSR_INVALID		((u64)-1L)
-
 /* This table is ordered in priority of errors and matches the
  * AFAR overwrite policy as well.
  */
@@ -758,10 +719,6 @@
 static struct afsr_error_table *cheetah_error_table;
 static unsigned long cheetah_afsr_errors;
 
-/* This is allocated at boot time based upon the largest hardware
- * cpu ID in the system.  We allocate two entries per cpu, one for
- * TL==0 logging and one for TL >= 1 logging.
- */
 struct cheetah_err_info *cheetah_error_log;
 
 static inline struct cheetah_err_info *cheetah_get_error_log(unsigned long afsr)
@@ -2102,7 +2059,7 @@
 	force_sig_info(SIGFPE, &info, current);
 }
 
-void instruction_dump (unsigned int *pc)
+static void instruction_dump(unsigned int *pc)
 {
 	int i;
 
@@ -2115,7 +2072,7 @@
 	printk("\n");
 }
 
-static void user_instruction_dump (unsigned int __user *pc)
+static void user_instruction_dump(unsigned int __user *pc)
 {
 	int i;
 	unsigned int buf[9];
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index 466fd6c..f37078d 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -46,6 +46,7 @@
 #include <asm/prom.h>
 #include <asm/sstate.h>
 #include <asm/mdesc.h>
+#include <asm/cpudata.h>
 
 #define MAX_PHYS_ADDRESS	(1UL << 42UL)
 #define KPTE_BITMAP_CHUNK_SZ	(256UL * 1024UL * 1024UL)
@@ -1273,10 +1274,6 @@
 
 /* paging_init() sets up the page tables */
 
-extern void cheetah_ecache_flush_init(void);
-extern void sun4v_patch_tlb_handlers(void);
-
-extern void cpu_probe(void);
 extern void central_probe(void);
 
 static unsigned long last_valid_pfn;
diff --git a/arch/sparc64/mm/tlb.c b/arch/sparc64/mm/tlb.c
index 3f10fc9..ae24919 100644
--- a/arch/sparc64/mm/tlb.c
+++ b/arch/sparc64/mm/tlb.c
@@ -23,9 +23,7 @@
 
 void flush_tlb_pending(void)
 {
-	struct mmu_gather *mp = &__get_cpu_var(mmu_gathers);
-
-	preempt_disable();
+	struct mmu_gather *mp = &get_cpu_var(mmu_gathers);
 
 	if (mp->tlb_nr) {
 		flush_tsb_user(mp);
@@ -42,7 +40,7 @@
 		mp->tlb_nr = 0;
 	}
 
-	preempt_enable();
+	put_cpu_var(mmu_gathers);
 }
 
 void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t orig)
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 1e8f41a..1d43bdf 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -256,11 +256,7 @@
 
 static void uml_net_set_multicast_list(struct net_device *dev)
 {
-	if (dev->flags & IFF_PROMISC)
-		return;
-	else if (dev->mc_count)
-		dev->flags |= IFF_ALLMULTI;
-	else dev->flags &= ~IFF_ALLMULTI;
+	return;
 }
 
 static void uml_net_tx_timeout(struct net_device *dev)
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 45d79ea..5fed98c 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -65,7 +65,8 @@
    get them easily into strings. */
 asm("\t.section .rodata, \"a\"\nintelnops: "
 	GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6
-	GENERIC_NOP7 GENERIC_NOP8);
+	GENERIC_NOP7 GENERIC_NOP8
+    "\t.previous");
 extern const unsigned char intelnops[];
 static const unsigned char *const intel_nops[ASM_NOP_MAX+1] = {
 	NULL,
@@ -83,7 +84,8 @@
 #ifdef K8_NOP1
 asm("\t.section .rodata, \"a\"\nk8nops: "
 	K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6
-	K8_NOP7 K8_NOP8);
+	K8_NOP7 K8_NOP8
+    "\t.previous");
 extern const unsigned char k8nops[];
 static const unsigned char *const k8_nops[ASM_NOP_MAX+1] = {
 	NULL,
@@ -101,7 +103,8 @@
 #ifdef K7_NOP1
 asm("\t.section .rodata, \"a\"\nk7nops: "
 	K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6
-	K7_NOP7 K7_NOP8);
+	K7_NOP7 K7_NOP8
+    "\t.previous");
 extern const unsigned char k7nops[];
 static const unsigned char *const k7_nops[ASM_NOP_MAX+1] = {
 	NULL,
@@ -119,7 +122,8 @@
 #ifdef P6_NOP1
 asm("\t.section .rodata, \"a\"\np6nops: "
 	P6_NOP1 P6_NOP2 P6_NOP3 P6_NOP4 P6_NOP5 P6_NOP6
-	P6_NOP7 P6_NOP8);
+	P6_NOP7 P6_NOP8
+    "\t.previous");
 extern const unsigned char p6nops[];
 static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = {
 	NULL,
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 027e5c0..170d2f5 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -143,14 +143,6 @@
 #endif
 
 /*
- * If we configured ourselves for a TSC, we'd better have one!
- */
-#ifdef CONFIG_X86_TSC
-	if (!cpu_has_tsc)
-		panic("Kernel compiled for Pentium+, requires TSC feature!");
-#endif
-
-/*
  * If we were told we had a good local APIC, check for buggy Pentia,
  * i.e. all B steppings and the C2 stepping of P54C when using their
  * integrated APIC (see 11AP erratum in "Pentium Processor
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
index f2b5a621d..8a85c93 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
@@ -63,7 +63,7 @@
  */
 static int speedstep_smi_ownership (void)
 {
-	u32 command, result, magic;
+	u32 command, result, magic, dummy;
 	u32 function = GET_SPEEDSTEP_OWNER;
 	unsigned char magic_data[] = "Copyright (c) 1999 Intel Corporation";
 
@@ -73,8 +73,11 @@
 	dprintk("trying to obtain ownership with command %x at port %x\n", command, smi_port);
 
 	__asm__ __volatile__(
+		"push %%ebp\n"
 		"out %%al, (%%dx)\n"
-		: "=D" (result)
+		"pop %%ebp\n"
+		: "=D" (result), "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy),
+			"=S" (dummy)
 		: "a" (command), "b" (function), "c" (0), "d" (smi_port),
 			"D" (0), "S" (magic)
 		: "memory"
@@ -96,7 +99,7 @@
  */
 static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
 {
-	u32 command, result = 0, edi, high_mhz, low_mhz;
+	u32 command, result = 0, edi, high_mhz, low_mhz, dummy;
 	u32 state=0;
 	u32 function = GET_SPEEDSTEP_FREQS;
 
@@ -109,10 +112,12 @@
 
 	dprintk("trying to determine frequencies with command %x at port %x\n", command, smi_port);
 
-	__asm__ __volatile__("movl $0, %%edi\n"
+	__asm__ __volatile__(
+		"push %%ebp\n"
 		"out %%al, (%%dx)\n"
-		: "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi)
-		: "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0)
+		"pop %%ebp"
+		: "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi), "=S" (dummy)
+		: "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0)
 	);
 
 	dprintk("result %x, low_freq %u, high_freq %u\n", result, low_mhz, high_mhz);
@@ -135,16 +140,18 @@
 static int speedstep_get_state (void)
 {
 	u32 function=GET_SPEEDSTEP_STATE;
-	u32 result, state, edi, command;
+	u32 result, state, edi, command, dummy;
 
 	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
 
 	dprintk("trying to determine current setting with command %x at port %x\n", command, smi_port);
 
-	__asm__ __volatile__("movl $0, %%edi\n"
+	__asm__ __volatile__(
+		"push %%ebp\n"
 		"out %%al, (%%dx)\n"
-		: "=a" (result), "=b" (state), "=D" (edi)
-		: "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0)
+		"pop %%ebp\n"
+		: "=a" (result), "=b" (state), "=D" (edi), "=c" (dummy), "=d" (dummy), "=S" (dummy)
+		: "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0), "D" (0)
 	);
 
 	dprintk("state is %x, result is %x\n", state, result);
@@ -160,7 +167,7 @@
  */
 static void speedstep_set_state (unsigned int state)
 {
-	unsigned int result = 0, command, new_state;
+	unsigned int result = 0, command, new_state, dummy;
 	unsigned long flags;
 	unsigned int function=SET_SPEEDSTEP_STATE;
 	unsigned int retry = 0;
@@ -182,10 +189,12 @@
 		}
 		retry++;
 		__asm__ __volatile__(
-			"movl $0, %%edi\n"
+			"push %%ebp\n"
 			"out %%al, (%%dx)\n"
-			: "=b" (new_state), "=D" (result)
-			: "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0)
+			"pop %%ebp"
+			: "=b" (new_state), "=D" (result), "=c" (dummy), "=a" (dummy),
+				"=d" (dummy), "=S" (dummy)
+			: "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0)
 			);
 	} while ((new_state != state) && (retry <= SMI_TRIES));
 
@@ -195,7 +204,7 @@
 	if (new_state == state) {
 		dprintk("change to %u MHz succeeded after %u tries with result %u\n", (speedstep_freqs[new_state].frequency / 1000), retry, result);
 	} else {
-		printk(KERN_ERR "cpufreq: change failed with new_state %u and result %u\n", new_state, result);
+		printk(KERN_ERR "cpufreq: change to state %u failed with new_state %u and result %u\n", state, new_state, result);
 	}
 
 	return;
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 103d61a..3e18db4 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -176,12 +176,13 @@
 }
 
 /**
- * Checks and updates an fixed-range MTRR if it differs from the value it
- * should have. If K8 extentions are wanted, update the K8 SYSCFG MSR also.
- * see AMD publication no. 24593, chapter 7.8.1, page 233 for more information
- * \param msr MSR address of the MTTR which should be checked and updated
- * \param changed pointer which indicates whether the MTRR needed to be changed
- * \param msrwords pointer to the MSR values which the MSR should have
+ * set_fixed_range - checks & updates a fixed-range MTRR if it differs from the value it should have
+ * @msr: MSR address of the MTTR which should be checked and updated
+ * @changed: pointer which indicates whether the MTRR needed to be changed
+ * @msrwords: pointer to the MSR values which the MSR should have
+ *
+ * If K8 extentions are wanted, update the K8 SYSCFG MSR also.
+ * See AMD publication no. 24593, chapter 7.8.1, page 233 for more information.
  */
 static void set_fixed_range(int msr, bool *changed, unsigned int *msrwords)
 {
@@ -199,12 +200,15 @@
 	}
 }
 
+/**
+ * generic_get_free_region - Get a free MTRR.
+ * @base: The starting (base) address of the region.
+ * @size: The size (in bytes) of the region.
+ * @replace_reg: mtrr index to be replaced; set to invalid value if none.
+ *
+ * Returns: The index of the region on success, else negative on error.
+ */
 int generic_get_free_region(unsigned long base, unsigned long size, int replace_reg)
-/*  [SUMMARY] Get a free MTRR.
-    <base> The starting (base) address of the region.
-    <size> The size (in bytes) of the region.
-    [RETURNS] The index of the region on success, else -1 on error.
-*/
 {
 	int i, max;
 	mtrr_type ltype;
@@ -249,8 +253,8 @@
 }
 
 /**
- * Checks and updates the fixed-range MTRRs if they differ from the saved set
- * \param frs pointer to fixed-range MTRR values, saved by get_fixed_ranges()
+ * set_fixed_ranges - checks & updates the fixed-range MTRRs if they differ from the saved set
+ * @frs: pointer to fixed-range MTRR values, saved by get_fixed_ranges()
  */
 static int set_fixed_ranges(mtrr_type * frs)
 {
@@ -294,13 +298,13 @@
 
 static u32 deftype_lo, deftype_hi;
 
+/**
+ * set_mtrr_state - Set the MTRR state for this CPU.
+ *
+ * NOTE: The CPU must already be in a safe state for MTRR changes.
+ * RETURNS: 0 if no changes made, else a mask indicating what was changed.
+ */
 static unsigned long set_mtrr_state(void)
-/*  [SUMMARY] Set the MTRR state for this CPU.
-    <state> The MTRR state information to read.
-    <ctxt> Some relevant CPU context.
-    [NOTE] The CPU must already be in a safe state for MTRR changes.
-    [RETURNS] 0 if no changes made, else a mask indication what was changed.
-*/
 {
 	unsigned int i;
 	unsigned long change_mask = 0;
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 9b83832..b943e10 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -652,9 +652,6 @@
 			wd_ops = &p6_wd_ops;
 			break;
 		case 15:
-			if (boot_cpu_data.x86_model > 0x4)
-				return;
-
 			wd_ops = &p4_wd_ops;
 			break;
 		default:
@@ -670,8 +667,10 @@
 {
 	if (!wd_ops) {
 		probe_nmi_watchdog();
-		if (!wd_ops)
+		if (!wd_ops) {
+			printk(KERN_INFO "NMI watchdog: CPU not supported\n");
 			return -1;
+		}
 
 		if (!wd_ops->reserve()) {
 			printk(KERN_ERR
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 235fd6c..36652ea 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -133,13 +133,16 @@
 #ifdef CONFIG_HPET_EMULATE_RTC
 	hpet_reserve_timer(&hd, 1);
 #endif
+
 	hd.hd_irq[0] = HPET_LEGACY_8254;
 	hd.hd_irq[1] = HPET_LEGACY_RTC;
 
-       for (i = 2; i < nrtimers; timer++, i++)
-	       hd.hd_irq[i] = (timer->hpet_config & Tn_INT_ROUTE_CNF_MASK) >>
-		       Tn_INT_ROUTE_CNF_SHIFT;
+	for (i = 2; i < nrtimers; timer++, i++)
+		hd.hd_irq[i] = (timer->hpet_config & Tn_INT_ROUTE_CNF_MASK) >>
+			Tn_INT_ROUTE_CNF_SHIFT;
+
 	hpet_alloc(&hd);
+
 }
 #else
 static void hpet_reserve_platform_timers(unsigned long id) { }
diff --git a/arch/x86/kernel/io_delay.c b/arch/x86/kernel/io_delay.c
index c706a30..5921e5f 100644
--- a/arch/x86/kernel/io_delay.c
+++ b/arch/x86/kernel/io_delay.c
@@ -78,6 +78,14 @@
 	},
 	{
 		.callback	= dmi_io_delay_0xed_port,
+		.ident		= "HP Pavilion dv6000",
+		.matches	= {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"),
+			DMI_MATCH(DMI_BOARD_NAME, "30B8")
+		}
+	},
+	{
+		.callback	= dmi_io_delay_0xed_port,
 		.ident		= "HP Pavilion tx1000",
 		.matches	= {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"),
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 236d2f8..576a03db 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -233,6 +233,7 @@
 
 void arch_crash_save_vmcoreinfo(void)
 {
+	VMCOREINFO_SYMBOL(phys_base);
 	VMCOREINFO_SYMBOL(init_level4_pgt);
 
 #ifdef CONFIG_NUMA
diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c
index 027fc06..b402c0f 100644
--- a/arch/x86/kernel/mfgpt_32.c
+++ b/arch/x86/kernel/mfgpt_32.c
@@ -30,6 +30,7 @@
 
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <asm/geode.h>
 
 static struct mfgpt_timer_t {
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index faf3229..700e464 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -615,8 +615,8 @@
 
  nommu:
 	/* Should not happen anymore */
-	printk(KERN_ERR "PCI-DMA: More than 4GB of RAM and no IOMMU\n"
-	       KERN_ERR "PCI-DMA: 32bit PCI IO may malfunction.\n");
+	printk(KERN_WARNING "PCI-DMA: More than 4GB of RAM and no IOMMU\n"
+	       KERN_WARNING "falling back to iommu=soft.\n");
 	return -1;
 }
 
@@ -692,9 +692,9 @@
 	    !gart_iommu_aperture ||
 	    (no_agp && init_k8_gatt(&info) < 0)) {
 		if (end_pfn > MAX_DMA32_PFN) {
-			printk(KERN_ERR "WARNING more than 4GB of memory "
-					"but GART IOMMU not available.\n"
-			       KERN_ERR "WARNING 32bit PCI may malfunction.\n");
+			printk(KERN_WARNING "More than 4GB of memory "
+			       	          "but GART IOMMU not available.\n"
+			       KERN_WARNING "falling back to iommu=soft.\n");
 		}
 		return;
 	}
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index be3c7a2..43930e7 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -82,7 +82,6 @@
  */
 void (*pm_idle)(void);
 EXPORT_SYMBOL(pm_idle);
-static DEFINE_PER_CPU(unsigned int, cpu_idle_state);
 
 void disable_hlt(void)
 {
@@ -190,9 +189,6 @@
 		while (!need_resched()) {
 			void (*idle)(void);
 
-			if (__get_cpu_var(cpu_idle_state))
-				__get_cpu_var(cpu_idle_state) = 0;
-
 			check_pgt_cache();
 			rmb();
 			idle = pm_idle;
@@ -220,40 +216,19 @@
 {
 }
 
+/*
+ * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
+ * pm_idle and update to new pm_idle value. Required while changing pm_idle
+ * handler on SMP systems.
+ *
+ * Caller must have changed pm_idle to the new value before the call. Old
+ * pm_idle value will not be used by any CPU after the return of this function.
+ */
 void cpu_idle_wait(void)
 {
-	unsigned int cpu, this_cpu = get_cpu();
-	cpumask_t map, tmp = current->cpus_allowed;
-
-	set_cpus_allowed(current, cpumask_of_cpu(this_cpu));
-	put_cpu();
-
-	cpus_clear(map);
-	for_each_online_cpu(cpu) {
-		per_cpu(cpu_idle_state, cpu) = 1;
-		cpu_set(cpu, map);
-	}
-
-	__get_cpu_var(cpu_idle_state) = 0;
-
-	wmb();
-	do {
-		ssleep(1);
-		for_each_online_cpu(cpu) {
-			if (cpu_isset(cpu, map) && !per_cpu(cpu_idle_state, cpu))
-				cpu_clear(cpu, map);
-		}
-		cpus_and(map, map, cpu_online_map);
-		/*
-		 * We waited 1 sec, if a CPU still did not call idle
-		 * it may be because it is in idle and not waking up
-		 * because it has nothing to do.
-		 * Give all the remaining CPUS a kick.
-		 */
-		smp_call_function_mask(map, do_nothing, NULL, 0);
-	} while (!cpus_empty(map));
-
-	set_cpus_allowed(current, tmp);
+	smp_mb();
+	/* kick all the CPUs so that they exit out of pm_idle */
+	smp_call_function(do_nothing, NULL, 0, 1);
 }
 EXPORT_SYMBOL_GPL(cpu_idle_wait);
 
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 3baf9b9..46c4c54 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -63,7 +63,6 @@
  */
 void (*pm_idle)(void);
 EXPORT_SYMBOL(pm_idle);
-static DEFINE_PER_CPU(unsigned int, cpu_idle_state);
 
 static ATOMIC_NOTIFIER_HEAD(idle_notifier);
 
@@ -173,9 +172,6 @@
 		while (!need_resched()) {
 			void (*idle)(void);
 
-			if (__get_cpu_var(cpu_idle_state))
-				__get_cpu_var(cpu_idle_state) = 0;
-
 			rmb();
 			idle = pm_idle;
 			if (!idle)
@@ -207,40 +203,19 @@
 {
 }
 
+/*
+ * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
+ * pm_idle and update to new pm_idle value. Required while changing pm_idle
+ * handler on SMP systems.
+ *
+ * Caller must have changed pm_idle to the new value before the call. Old
+ * pm_idle value will not be used by any CPU after the return of this function.
+ */
 void cpu_idle_wait(void)
 {
-	unsigned int cpu, this_cpu = get_cpu();
-	cpumask_t map, tmp = current->cpus_allowed;
-
-	set_cpus_allowed(current, cpumask_of_cpu(this_cpu));
-	put_cpu();
-
-	cpus_clear(map);
-	for_each_online_cpu(cpu) {
-		per_cpu(cpu_idle_state, cpu) = 1;
-		cpu_set(cpu, map);
-	}
-
-	__get_cpu_var(cpu_idle_state) = 0;
-
-	wmb();
-	do {
-		ssleep(1);
-		for_each_online_cpu(cpu) {
-			if (cpu_isset(cpu, map) && !per_cpu(cpu_idle_state, cpu))
-				cpu_clear(cpu, map);
-		}
-		cpus_and(map, map, cpu_online_map);
-		/*
-		 * We waited 1 sec, if a CPU still did not call idle
-		 * it may be because it is in idle and not waking up
-		 * because it has nothing to do.
-		 * Give all the remaining CPUS a kick.
-		 */
-		smp_call_function_mask(map, do_nothing, 0, 0);
-	} while (!cpus_empty(map));
-
-	set_cpus_allowed(current, tmp);
+	smp_mb();
+	/* kick all the CPUs so that they exit out of pm_idle */
+	smp_call_function(do_nothing, NULL, 0, 1);
 }
 EXPORT_SYMBOL_GPL(cpu_idle_wait);
 
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index d5904ee..eb92ccb 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -600,21 +600,6 @@
 	return sizeof(ret);
 }
 
-static int ptrace_bts_write_record(struct task_struct *child,
-				   const struct bts_struct *in)
-{
-	int retval;
-
-	if (!child->thread.ds_area_msr)
-		return -ENXIO;
-
-	retval = ds_write_bts((void *)child->thread.ds_area_msr, in);
-	if (retval)
-		return retval;
-
-	return sizeof(*in);
-}
-
 static int ptrace_bts_clear(struct task_struct *child)
 {
 	if (!child->thread.ds_area_msr)
@@ -657,75 +642,6 @@
 	return end;
 }
 
-static int ptrace_bts_realloc(struct task_struct *child,
-			      int size, int reduce_size)
-{
-	unsigned long rlim, vm;
-	int ret, old_size;
-
-	if (size < 0)
-		return -EINVAL;
-
-	old_size = ds_get_bts_size((void *)child->thread.ds_area_msr);
-	if (old_size < 0)
-		return old_size;
-
-	ret = ds_free((void **)&child->thread.ds_area_msr);
-	if (ret < 0)
-		goto out;
-
-	size >>= PAGE_SHIFT;
-	old_size >>= PAGE_SHIFT;
-
-	current->mm->total_vm  -= old_size;
-	current->mm->locked_vm -= old_size;
-
-	if (size == 0)
-		goto out;
-
-	rlim = current->signal->rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT;
-	vm = current->mm->total_vm  + size;
-	if (rlim < vm) {
-		ret = -ENOMEM;
-
-		if (!reduce_size)
-			goto out;
-
-		size = rlim - current->mm->total_vm;
-		if (size <= 0)
-			goto out;
-	}
-
-	rlim = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT;
-	vm = current->mm->locked_vm  + size;
-	if (rlim < vm) {
-		ret = -ENOMEM;
-
-		if (!reduce_size)
-			goto out;
-
-		size = rlim - current->mm->locked_vm;
-		if (size <= 0)
-			goto out;
-	}
-
-	ret = ds_allocate((void **)&child->thread.ds_area_msr,
-			  size << PAGE_SHIFT);
-	if (ret < 0)
-		goto out;
-
-	current->mm->total_vm  += size;
-	current->mm->locked_vm += size;
-
-out:
-	if (child->thread.ds_area_msr)
-		set_tsk_thread_flag(child, TIF_DS_AREA_MSR);
-	else
-		clear_tsk_thread_flag(child, TIF_DS_AREA_MSR);
-
-	return ret;
-}
-
 static int ptrace_bts_config(struct task_struct *child,
 			     long cfg_size,
 			     const struct ptrace_bts_config __user *ucfg)
@@ -828,6 +744,91 @@
 	return sizeof(cfg);
 }
 
+
+static int ptrace_bts_write_record(struct task_struct *child,
+				   const struct bts_struct *in)
+{
+	int retval;
+
+	if (!child->thread.ds_area_msr)
+		return -ENXIO;
+
+	retval = ds_write_bts((void *)child->thread.ds_area_msr, in);
+	if (retval)
+		return retval;
+
+	return sizeof(*in);
+}
+
+static int ptrace_bts_realloc(struct task_struct *child,
+			      int size, int reduce_size)
+{
+	unsigned long rlim, vm;
+	int ret, old_size;
+
+	if (size < 0)
+		return -EINVAL;
+
+	old_size = ds_get_bts_size((void *)child->thread.ds_area_msr);
+	if (old_size < 0)
+		return old_size;
+
+	ret = ds_free((void **)&child->thread.ds_area_msr);
+	if (ret < 0)
+		goto out;
+
+	size >>= PAGE_SHIFT;
+	old_size >>= PAGE_SHIFT;
+
+	current->mm->total_vm  -= old_size;
+	current->mm->locked_vm -= old_size;
+
+	if (size == 0)
+		goto out;
+
+	rlim = current->signal->rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT;
+	vm = current->mm->total_vm  + size;
+	if (rlim < vm) {
+		ret = -ENOMEM;
+
+		if (!reduce_size)
+			goto out;
+
+		size = rlim - current->mm->total_vm;
+		if (size <= 0)
+			goto out;
+	}
+
+	rlim = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT;
+	vm = current->mm->locked_vm  + size;
+	if (rlim < vm) {
+		ret = -ENOMEM;
+
+		if (!reduce_size)
+			goto out;
+
+		size = rlim - current->mm->locked_vm;
+		if (size <= 0)
+			goto out;
+	}
+
+	ret = ds_allocate((void **)&child->thread.ds_area_msr,
+			  size << PAGE_SHIFT);
+	if (ret < 0)
+		goto out;
+
+	current->mm->total_vm  += size;
+	current->mm->locked_vm += size;
+
+out:
+	if (child->thread.ds_area_msr)
+		set_tsk_thread_flag(child, TIF_DS_AREA_MSR);
+	else
+		clear_tsk_thread_flag(child, TIF_DS_AREA_MSR);
+
+	return ret;
+}
+
 void ptrace_bts_take_timestamp(struct task_struct *tsk,
 			       enum bts_qualifier qualifier)
 {
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
index a1d7071..2b3e5d4 100644
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -406,8 +406,6 @@
 	 */
 	min_low_pfn = PFN_UP(init_pg_tables_end);
 
-	find_max_pfn();
-
 	max_low_pfn = find_max_low_pfn();
 
 #ifdef CONFIG_HIGHMEM
@@ -764,12 +762,13 @@
 	if (efi_enabled)
 		efi_init();
 
-	max_low_pfn = setup_memory();
-
 	/* update e820 for memory not covered by WB MTRRs */
+	find_max_pfn();
 	mtrr_bp_init();
 	if (mtrr_trim_uncached_memory(max_pfn))
-		max_low_pfn = setup_memory();
+		find_max_pfn();
+
+	max_low_pfn = setup_memory();
 
 #ifdef CONFIG_VMI
 	/*
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index 7637dc9..f4f7ecf 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -801,7 +801,7 @@
 	/* Don't do the funky fallback heuristics the AMD version employs
 	   for now. */
 	node = apicid_to_node[apicid];
-	if (node == NUMA_NO_NODE)
+	if (node == NUMA_NO_NODE || !node_online(node))
 		node = first_node(node_online_map);
 	numa_set_node(cpu, node);
 
diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c
index 9d406cd..071ff47 100644
--- a/arch/x86/kernel/step.c
+++ b/arch/x86/kernel/step.c
@@ -140,6 +140,9 @@
  */
 static void write_debugctlmsr(struct task_struct *child, unsigned long val)
 {
+	if (child->thread.debugctlmsr == val)
+		return;
+
 	child->thread.debugctlmsr = val;
 
 	if (child != current)
@@ -165,11 +168,11 @@
 		write_debugctlmsr(child,
 				  child->thread.debugctlmsr | DEBUGCTLMSR_BTF);
 	} else {
-	    write_debugctlmsr(child,
-			      child->thread.debugctlmsr & ~DEBUGCTLMSR_BTF);
+		write_debugctlmsr(child,
+				  child->thread.debugctlmsr & ~DEBUGCTLMSR_BTF);
 
-	    if (!child->thread.debugctlmsr)
-		    clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
+		if (!child->thread.debugctlmsr)
+			clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
 	}
 }
 
diff --git a/arch/x86/kernel/tls.c b/arch/x86/kernel/tls.c
index 022bcaa..ab6bf37 100644
--- a/arch/x86/kernel/tls.c
+++ b/arch/x86/kernel/tls.c
@@ -92,7 +92,7 @@
 asmlinkage int sys_set_thread_area(struct user_desc __user *u_info)
 {
 	int ret = do_set_thread_area(current, -1, u_info, 1);
-	prevent_tail_call(ret);
+	asmlinkage_protect(1, ret, u_info);
 	return ret;
 }
 
@@ -142,7 +142,7 @@
 asmlinkage int sys_get_thread_area(struct user_desc __user *u_info)
 {
 	int ret = do_get_thread_area(current, -1, u_info);
-	prevent_tail_call(ret);
+	asmlinkage_protect(1, ret, u_info);
 	return ret;
 }
 
diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c
index f14cfd9..c2241e0 100644
--- a/arch/x86/kernel/tsc_32.c
+++ b/arch/x86/kernel/tsc_32.c
@@ -256,9 +256,7 @@
 						ref_freq, freq->new);
 			if (!(freq->flags & CPUFREQ_CONST_LOOPS)) {
 				tsc_khz = cpu_khz;
-				preempt_disable();
-				set_cyc2ns_scale(cpu_khz, smp_processor_id());
-				preempt_enable();
+				set_cyc2ns_scale(cpu_khz, freq->cpu);
 				/*
 				 * TSC based sched_clock turns
 				 * to junk w/ cpufreq
diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c
index 947554d..d3bebaa 100644
--- a/arch/x86/kernel/tsc_64.c
+++ b/arch/x86/kernel/tsc_64.c
@@ -148,9 +148,7 @@
 			mark_tsc_unstable("cpufreq changes");
 	}
 
-	preempt_disable();
-	set_cyc2ns_scale(tsc_khz_ref, smp_processor_id());
-	preempt_enable();
+	set_cyc2ns_scale(tsc_khz_ref, freq->cpu);
 
 	return 0;
 }
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index a104c53..3335b45 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -10,21 +10,19 @@
  * (such as the example in Documentation/lguest/lguest.c) is called the
  * Launcher.
  *
- * Secondly, we only run specially modified Guests, not normal kernels.  When
- * you set CONFIG_LGUEST to 'y' or 'm', this automatically sets
- * CONFIG_LGUEST_GUEST=y, which compiles this file into the kernel so it knows
- * how to be a Guest.  This means that you can use the same kernel you boot
- * normally (ie. as a Host) as a Guest.
+ * Secondly, we only run specially modified Guests, not normal kernels: setting
+ * CONFIG_LGUEST_GUEST to "y" compiles this file into the kernel so it knows
+ * how to be a Guest at boot time.  This means that you can use the same kernel
+ * you boot normally (ie. as a Host) as a Guest.
  *
  * These Guests know that they cannot do privileged operations, such as disable
  * interrupts, and that they have to ask the Host to do such things explicitly.
  * This file consists of all the replacements for such low-level native
  * hardware operations: these special Guest versions call the Host.
  *
- * So how does the kernel know it's a Guest?  The Guest starts at a special
- * entry point marked with a magic string, which sets up a few things then
- * calls here.  We replace the native functions various "paravirt" structures
- * with our Guest versions, then boot like normal. :*/
+ * So how does the kernel know it's a Guest?  We'll see that later, but let's
+ * just say that we end up here where we replace the native functions various
+ * "paravirt" structures with our Guest versions, then boot like normal. :*/
 
 /*
  * Copyright (C) 2006, Rusty Russell <rusty@rustcorp.com.au> IBM Corporation.
@@ -134,7 +132,7 @@
  * lguest_leave_lazy_mode().
  *
  * So, when we're in lazy mode, we call async_hcall() to store the call for
- * future processing. */
+ * future processing: */
 static void lazy_hcall(unsigned long call,
 		       unsigned long arg1,
 		       unsigned long arg2,
@@ -147,7 +145,7 @@
 }
 
 /* When lazy mode is turned off reset the per-cpu lazy mode variable and then
- * issue a hypercall to flush any stored calls. */
+ * issue the do-nothing hypercall to flush any stored calls. */
 static void lguest_leave_lazy_mode(void)
 {
 	paravirt_leave_lazy(paravirt_get_lazy_mode());
@@ -164,7 +162,7 @@
  *
  * So instead we keep an "irq_enabled" field inside our "struct lguest_data",
  * which the Guest can update with a single instruction.  The Host knows to
- * check there when it wants to deliver an interrupt.
+ * check there before it tries to deliver an interrupt.
  */
 
 /* save_flags() is expected to return the processor state (ie. "flags").  The
@@ -196,10 +194,15 @@
 /*M:003 Note that we don't check for outstanding interrupts when we re-enable
  * them (or when we unmask an interrupt).  This seems to work for the moment,
  * since interrupts are rare and we'll just get the interrupt on the next timer
- * tick, but when we turn on CONFIG_NO_HZ, we should revisit this.  One way
+ * tick, but now we can run with CONFIG_NO_HZ, we should revisit this.  One way
  * would be to put the "irq_enabled" field in a page by itself, and have the
  * Host write-protect it when an interrupt comes in when irqs are disabled.
- * There will then be a page fault as soon as interrupts are re-enabled. :*/
+ * There will then be a page fault as soon as interrupts are re-enabled.
+ *
+ * A better method is to implement soft interrupt disable generally for x86:
+ * instead of disabling interrupts, we set a flag.  If an interrupt does come
+ * in, we then disable them for real.  This is uncommon, so we could simply use
+ * a hypercall for interrupt control and not worry about efficiency. :*/
 
 /*G:034
  * The Interrupt Descriptor Table (IDT).
@@ -212,6 +215,10 @@
 static void lguest_write_idt_entry(gate_desc *dt,
 				   int entrynum, const gate_desc *g)
 {
+	/* The gate_desc structure is 8 bytes long: we hand it to the Host in
+	 * two 32-bit chunks.  The whole 32-bit kernel used to hand descriptors
+	 * around like this; typesafety wasn't a big concern in Linux's early
+	 * years. */
 	u32 *desc = (u32 *)g;
 	/* Keep the local copy up to date. */
 	native_write_idt_entry(dt, entrynum, g);
@@ -243,7 +250,8 @@
  *
  * This is the opposite of the IDT code where we have a LOAD_IDT_ENTRY
  * hypercall and use that repeatedly to load a new IDT.  I don't think it
- * really matters, but wouldn't it be nice if they were the same?
+ * really matters, but wouldn't it be nice if they were the same?  Wouldn't
+ * it be even better if you were the one to send the patch to fix it?
  */
 static void lguest_load_gdt(const struct desc_ptr *desc)
 {
@@ -298,9 +306,9 @@
 
 /* The "cpuid" instruction is a way of querying both the CPU identity
  * (manufacturer, model, etc) and its features.  It was introduced before the
- * Pentium in 1993 and keeps getting extended by both Intel and AMD.  As you
- * might imagine, after a decade and a half this treatment, it is now a giant
- * ball of hair.  Its entry in the current Intel manual runs to 28 pages.
+ * Pentium in 1993 and keeps getting extended by both Intel, AMD and others.
+ * As you might imagine, after a decade and a half this treatment, it is now a
+ * giant ball of hair.  Its entry in the current Intel manual runs to 28 pages.
  *
  * This instruction even it has its own Wikipedia entry.  The Wikipedia entry
  * has been translated into 4 languages.  I am not making this up!
@@ -594,17 +602,17 @@
 	return lguest_data.time.tv_sec;
 }
 
-/* The TSC is a Time Stamp Counter.  The Host tells us what speed it runs at,
- * or 0 if it's unusable as a reliable clock source.  This matches what we want
- * here: if we return 0 from this function, the x86 TSC clock will not register
- * itself. */
+/* The TSC is an Intel thing called the Time Stamp Counter.  The Host tells us
+ * what speed it runs at, or 0 if it's unusable as a reliable clock source.
+ * This matches what we want here: if we return 0 from this function, the x86
+ * TSC clock will give up and not register itself. */
 static unsigned long lguest_cpu_khz(void)
 {
 	return lguest_data.tsc_khz;
 }
 
-/* If we can't use the TSC, the kernel falls back to our "lguest_clock", where
- * we read the time value given to us by the Host. */
+/* If we can't use the TSC, the kernel falls back to our lower-priority
+ * "lguest_clock", where we read the time value given to us by the Host. */
 static cycle_t lguest_clock_read(void)
 {
 	unsigned long sec, nsec;
@@ -648,12 +656,16 @@
 static int lguest_clockevent_set_next_event(unsigned long delta,
                                            struct clock_event_device *evt)
 {
+	/* FIXME: I don't think this can ever happen, but James tells me he had
+	 * to put this code in.  Maybe we should remove it now.  Anyone? */
 	if (delta < LG_CLOCK_MIN_DELTA) {
 		if (printk_ratelimit())
 			printk(KERN_DEBUG "%s: small delta %lu ns\n",
 			       __FUNCTION__, delta);
 		return -ETIME;
 	}
+
+	/* Please wake us this far in the future. */
 	hcall(LHCALL_SET_CLOCKEVENT, delta, 0, 0);
 	return 0;
 }
@@ -738,7 +750,7 @@
  * will not tolerate us trying to use that), the stack pointer, and the number
  * of pages in the stack. */
 static void lguest_load_sp0(struct tss_struct *tss,
-				     struct thread_struct *thread)
+			    struct thread_struct *thread)
 {
 	lazy_hcall(LHCALL_SET_STACK, __KERNEL_DS|0x1, thread->sp0,
 		   THREAD_SIZE/PAGE_SIZE);
@@ -786,9 +798,8 @@
 	hcall(LHCALL_HALT, 0, 0, 0);
 }
 
-/* Perhaps CRASH isn't the best name for this hypercall, but we use it to get a
- * message out when we're crashing as well as elegant termination like powering
- * off.
+/* The SHUTDOWN hypercall takes a string to describe what's happening, and
+ * an argument which says whether this to restart (reboot) the Guest or not.
  *
  * Note that the Host always prefers that the Guest speak in physical addresses
  * rather than virtual addresses, so we use __pa() here. */
@@ -816,8 +827,9 @@
 /* Setting up memory is fairly easy. */
 static __init char *lguest_memory_setup(void)
 {
-	/* We do this here and not earlier because lockcheck barfs if we do it
-	 * before start_kernel() */
+	/* We do this here and not earlier because lockcheck used to barf if we
+	 * did it before start_kernel().  I think we fixed that, so it'd be
+	 * nice to move it back to lguest_init.  Patch welcome... */
 	atomic_notifier_chain_register(&panic_notifier_list, &paniced);
 
 	/* The Linux bootloader header contains an "e820" memory map: the
@@ -850,12 +862,19 @@
 	return len;
 }
 
+/* Rebooting also tells the Host we're finished, but the RESTART flag tells the
+ * Launcher to reboot us. */
+static void lguest_restart(char *reason)
+{
+	hcall(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART, 0);
+}
+
 /*G:050
  * Patching (Powerfully Placating Performance Pedants)
  *
- * We have already seen that pv_ops structures let us replace simple
- * native instructions with calls to the appropriate back end all throughout
- * the kernel.  This allows the same kernel to run as a Guest and as a native
+ * We have already seen that pv_ops structures let us replace simple native
+ * instructions with calls to the appropriate back end all throughout the
+ * kernel.  This allows the same kernel to run as a Guest and as a native
  * kernel, but it's slow because of all the indirect branches.
  *
  * Remember that David Wheeler quote about "Any problem in computer science can
@@ -908,14 +927,9 @@
 	return insn_len;
 }
 
-static void lguest_restart(char *reason)
-{
-	hcall(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART, 0);
-}
-
-/*G:030 Once we get to lguest_init(), we know we're a Guest.  The pv_ops
- * structures in the kernel provide points for (almost) every routine we have
- * to override to avoid privileged instructions. */
+/*G:030 Once we get to lguest_init(), we know we're a Guest.  The various
+ * pv_ops structures in the kernel provide points for (almost) every routine we
+ * have to override to avoid privileged instructions. */
 __init void lguest_init(void)
 {
 	/* We're under lguest, paravirt is enabled, and we're running at
@@ -1003,9 +1017,9 @@
 	 * the normal data segment to get through booting. */
 	asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_DS) : "memory");
 
-	/* The Host uses the top of the Guest's virtual address space for the
-	 * Host<->Guest Switcher, and it tells us how big that is in
-	 * lguest_data.reserve_mem, set up on the LGUEST_INIT hypercall. */
+	/* The Host<->Guest Switcher lives at the top of our address space, and
+	 * the Host told us how big it is when we made LGUEST_INIT hypercall:
+	 * it put the answer in lguest_data.reserve_mem  */
 	reserve_top_address(lguest_data.reserve_mem);
 
 	/* If we don't initialize the lock dependency checker now, it crashes
@@ -1027,6 +1041,7 @@
 	/* Math is always hard! */
 	new_cpu_data.hard_math = 1;
 
+	/* We don't have features.  We have puppies!  Puppies! */
 #ifdef CONFIG_X86_MCE
 	mce_disabled = 1;
 #endif
@@ -1044,10 +1059,11 @@
 	virtio_cons_early_init(early_put_chars);
 
 	/* Last of all, we set the power management poweroff hook to point to
-	 * the Guest routine to power off. */
+	 * the Guest routine to power off, and the reboot hook to our restart
+	 * routine. */
 	pm_power_off = lguest_power_off;
-
 	machine_ops.restart = lguest_restart;
+
 	/* Now we're set up, call start_kernel() in init/main.c and we proceed
 	 * to boot as normal.  It never returns. */
 	start_kernel();
diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S
index 95b6fbcd..5c7cef3 100644
--- a/arch/x86/lguest/i386_head.S
+++ b/arch/x86/lguest/i386_head.S
@@ -5,13 +5,20 @@
 #include <asm/thread_info.h>
 #include <asm/processor-flags.h>
 
-/*G:020 This is where we begin: head.S notes that the boot header's platform
- * type field is "1" (lguest), so calls us here.
+/*G:020 Our story starts with the kernel booting into startup_32 in
+ * arch/x86/kernel/head_32.S.  It expects a boot header, which is created by
+ * the bootloader (the Launcher in our case).
+ *
+ * The startup_32 function does very little: it clears the uninitialized global
+ * C variables which we expect to be zero (ie. BSS) and then copies the boot
+ * header and kernel command line somewhere safe.  Finally it checks the
+ * 'hardware_subarch' field.  This was introduced in 2.6.24 for lguest and Xen:
+ * if it's set to '1' (lguest's assigned number), then it calls us here.
  *
  * WARNING: be very careful here!  We're running at addresses equal to physical
  * addesses (around 0), not above PAGE_OFFSET as most code expectes
  * (eg. 0xC0000000).  Jumps are relative, so they're OK, but we can't touch any
- * data.
+ * data without remembering to subtract __PAGE_OFFSET!
  *
  * The .section line puts this code in .init.text so it will be discarded after
  * boot. */
@@ -24,7 +31,7 @@
 	int $LGUEST_TRAP_ENTRY
 
 	/* The Host put the toplevel pagetable in lguest_data.pgdir.  The movsl
-	 * instruction uses %esi implicitly as the source for the copy we'
+	 * instruction uses %esi implicitly as the source for the copy we're
 	 * about to do. */
 	movl lguest_data - __PAGE_OFFSET + LGUEST_DATA_pgdir, %esi
 
diff --git a/arch/x86/mach-rdc321x/gpio.c b/arch/x86/mach-rdc321x/gpio.c
index 0312691..247f33d 100644
--- a/arch/x86/mach-rdc321x/gpio.c
+++ b/arch/x86/mach-rdc321x/gpio.c
@@ -1,91 +1,194 @@
 /*
- *  Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
- *  	RDC321x architecture specific GPIO support
+ *  GPIO support for RDC SoC R3210/R8610
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
+ *  Copyright (C) 2007, Florian Fainelli <florian@openwrt.org>
+ *  Copyright (C) 2008, Volker Weiss <dev@tintuc.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
  */
 
-#include <linux/autoconf.h>
-#include <linux/init.h>
+
+#include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/types.h>
 #include <linux/module.h>
-#include <linux/delay.h>
 
+#include <asm/gpio.h>
 #include <asm/mach-rdc321x/rdc321x_defs.h>
 
-static inline int rdc_gpio_is_valid(unsigned gpio)
+
+/* spin lock to protect our private copy of GPIO data register plus
+   the access to PCI conf registers. */
+static DEFINE_SPINLOCK(gpio_lock);
+
+/* copy of GPIO data registers */
+static u32 gpio_data_reg1;
+static u32 gpio_data_reg2;
+
+static u32 gpio_request_data[2];
+
+
+static inline void rdc321x_conf_write(unsigned addr, u32 value)
 {
-	return (gpio <= RDC_MAX_GPIO);
+	outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR);
+	outl(value, RDC3210_CFGREG_DATA);
 }
 
-static unsigned int rdc_gpio_read(unsigned gpio)
+static inline void rdc321x_conf_or(unsigned addr, u32 value)
 {
-	unsigned int val;
-
-	val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x84:0x48));
-	outl(val, RDC3210_CFGREG_ADDR);
-	udelay(10);
-	val = inl(RDC3210_CFGREG_DATA);
-	val |= (0x1 << (gpio & 0x1F));
-	outl(val, RDC3210_CFGREG_DATA);
-	udelay(10);
-	val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x88:0x4C));
-	outl(val, RDC3210_CFGREG_ADDR);
-	udelay(10);
-	val = inl(RDC3210_CFGREG_DATA);
-
-	return val;
+	outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR);
+	value |= inl(RDC3210_CFGREG_DATA);
+	outl(value, RDC3210_CFGREG_DATA);
 }
 
-static void rdc_gpio_write(unsigned int val)
+static inline u32 rdc321x_conf_read(unsigned addr)
 {
-	if (val) {
-		outl(val, RDC3210_CFGREG_DATA);
-		udelay(10);
-	}
+	outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR);
+
+	return inl(RDC3210_CFGREG_DATA);
 }
 
+/* configure pin as GPIO */
+static void rdc321x_configure_gpio(unsigned gpio)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	rdc321x_conf_or(gpio < 32
+		? RDC321X_GPIO_CTRL_REG1 : RDC321X_GPIO_CTRL_REG2,
+		1 << (gpio & 0x1f));
+	spin_unlock_irqrestore(&gpio_lock, flags);
+}
+
+/* initially setup the 2 copies of the gpio data registers.
+   This function must be called by the platform setup code. */
+void __init rdc321x_gpio_setup()
+{
+	/* this might not be, what others (BIOS, bootloader, etc.)
+	   wrote to these registers before, but it's a good guess. Still
+	   better than just using 0xffffffff. */
+
+	gpio_data_reg1 = rdc321x_conf_read(RDC321X_GPIO_DATA_REG1);
+	gpio_data_reg2 = rdc321x_conf_read(RDC321X_GPIO_DATA_REG2);
+}
+
+/* determine, if gpio number is valid */
+static inline int rdc321x_is_gpio(unsigned gpio)
+{
+	return gpio <= RDC321X_MAX_GPIO;
+}
+
+/* request GPIO */
+int rdc_gpio_request(unsigned gpio, const char *label)
+{
+	unsigned long flags;
+
+	if (!rdc321x_is_gpio(gpio))
+		return -EINVAL;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	if (gpio_request_data[(gpio & 0x20) ? 1 : 0] & (1 << (gpio & 0x1f)))
+		goto inuse;
+	gpio_request_data[(gpio & 0x20) ? 1 : 0] |= (1 << (gpio & 0x1f));
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return 0;
+inuse:
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	return -EINVAL;
+}
+EXPORT_SYMBOL(rdc_gpio_request);
+
+/* release previously-claimed GPIO */
+void rdc_gpio_free(unsigned gpio)
+{
+	unsigned long flags;
+
+	if (!rdc321x_is_gpio(gpio))
+		return;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	gpio_request_data[(gpio & 0x20) ? 1 : 0] &= ~(1 << (gpio & 0x1f));
+	spin_unlock_irqrestore(&gpio_lock, flags);
+}
+EXPORT_SYMBOL(rdc_gpio_free);
+
+/* read GPIO pin */
 int rdc_gpio_get_value(unsigned gpio)
 {
-	if (rdc_gpio_is_valid(gpio))
-		return (int)rdc_gpio_read(gpio);
-	else
-		return -EINVAL;
+	u32 reg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	reg = rdc321x_conf_read(gpio < 32
+		? RDC321X_GPIO_DATA_REG1 : RDC321X_GPIO_DATA_REG2);
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return (1 << (gpio & 0x1f)) & reg ? 1 : 0;
 }
 EXPORT_SYMBOL(rdc_gpio_get_value);
 
+/* set GPIO pin to value */
 void rdc_gpio_set_value(unsigned gpio, int value)
 {
-	unsigned int val;
+	unsigned long flags;
+	u32 reg;
 
-	if (!rdc_gpio_is_valid(gpio))
-		return;
-
-	val = rdc_gpio_read(gpio);
-
-	if (value)
-		val &= ~(0x1 << (gpio & 0x1F));
-	else
-		val |= (0x1 << (gpio & 0x1F));
-
-	rdc_gpio_write(val);
+	reg = 1 << (gpio & 0x1f);
+	if (gpio < 32) {
+		spin_lock_irqsave(&gpio_lock, flags);
+		if (value)
+			gpio_data_reg1 |= reg;
+		else
+			gpio_data_reg1 &= ~reg;
+		rdc321x_conf_write(RDC321X_GPIO_DATA_REG1, gpio_data_reg1);
+		spin_unlock_irqrestore(&gpio_lock, flags);
+	} else {
+		spin_lock_irqsave(&gpio_lock, flags);
+		if (value)
+			gpio_data_reg2 |= reg;
+		else
+			gpio_data_reg2 &= ~reg;
+		rdc321x_conf_write(RDC321X_GPIO_DATA_REG2, gpio_data_reg2);
+		spin_unlock_irqrestore(&gpio_lock, flags);
+	}
 }
 EXPORT_SYMBOL(rdc_gpio_set_value);
 
+/* configure GPIO pin as input */
 int rdc_gpio_direction_input(unsigned gpio)
 {
+	if (!rdc321x_is_gpio(gpio))
+		return -EINVAL;
+
+	rdc321x_configure_gpio(gpio);
+
 	return 0;
 }
 EXPORT_SYMBOL(rdc_gpio_direction_input);
 
+/* configure GPIO pin as output and set value */
 int rdc_gpio_direction_output(unsigned gpio, int value)
 {
+	if (!rdc321x_is_gpio(gpio))
+		return -EINVAL;
+
+	gpio_set_value(gpio, value);
+	rdc321x_configure_gpio(gpio);
+
 	return 0;
 }
 EXPORT_SYMBOL(rdc_gpio_direction_output);
-
-
diff --git a/arch/x86/mach-rdc321x/platform.c b/arch/x86/mach-rdc321x/platform.c
index dda6024a..a037041 100644
--- a/arch/x86/mach-rdc321x/platform.c
+++ b/arch/x86/mach-rdc321x/platform.c
@@ -62,6 +62,8 @@
 
 static int __init rdc_board_setup(void)
 {
+	rdc321x_gpio_setup();
+
 	return platform_add_devices(rdc321x_devs, ARRAY_SIZE(rdc321x_devs));
 }
 
diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c
index c394ca0..8e25e06 100644
--- a/arch/x86/mm/discontig_32.c
+++ b/arch/x86/mm/discontig_32.c
@@ -324,7 +324,6 @@
 	 * this space and use it to adjust the boundary between ZONE_NORMAL
 	 * and ZONE_HIGHMEM.
 	 */
-	find_max_pfn();
 	get_memcfg_numa();
 
 	kva_pages = calculate_numa_remap_pages();
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index fdc6674..ec08d83 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -91,12 +91,10 @@
 	int prefetch = 0;
 	unsigned char *max_instr;
 
-#ifdef CONFIG_X86_32
-	if (!(__supported_pte_mask & _PAGE_NX))
-		return 0;
-#endif
-
-	/* If it was a exec fault on NX page, ignore */
+	/*
+	 * If it was a exec (instruction fetch) fault on NX page, then
+	 * do not ignore the fault:
+	 */
 	if (error_code & PF_INSTR)
 		return 0;
 
diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index 3d936f2..9cf33d3 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -73,15 +73,15 @@
 {
 	enum fixed_addresses idx;
 	unsigned long vaddr;
+
 	/* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
-
-	debug_kmap_atomic_prot(type);
-
 	pagefault_disable();
 
 	if (!PageHighMem(page))
 		return page_address(page);
 
+	debug_kmap_atomic_prot(type);
+
 	idx = type + KM_TYPE_NR*smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
 	BUG_ON(!pte_none(*(kmap_pte-idx)));
diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index 4fbafb4..0b3d567 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -178,7 +178,7 @@
 
 	page = &pte_page(*pte)[vpfn % (HPAGE_SIZE/PAGE_SIZE)];
 
-	WARN_ON(!PageCompound(page));
+	WARN_ON(!PageHead(page));
 
 	return page;
 }
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 4afaba0..794895c 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -137,7 +137,11 @@
 	switch (mode) {
 	case IOR_MODE_UNCACHED:
 	default:
-		prot = PAGE_KERNEL_NOCACHE;
+		/*
+		 * FIXME: we will use UC MINUS for now, as video fb drivers
+		 * depend on it. Upcoming ioremap_wc() will fix this behavior.
+		 */
+		prot = PAGE_KERNEL_UC_MINUS;
 		break;
 	case IOR_MODE_CACHED:
 		prot = PAGE_KERNEL;
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 14e48b5..7b79f6b 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -771,7 +771,7 @@
 int set_memory_uc(unsigned long addr, int numpages)
 {
 	return change_page_attr_set(addr, numpages,
-				    __pgprot(_PAGE_PCD | _PAGE_PWT));
+				    __pgprot(_PAGE_PCD));
 }
 EXPORT_SYMBOL(set_memory_uc);
 
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 8b9ee27..27ee26a 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -95,7 +95,7 @@
  *
  * 0: not available, 1: available
  */
-static int have_vcpu_info_placement = 0;
+static int have_vcpu_info_placement = 1;
 
 static void __init xen_vcpu_setup(int cpu)
 {
@@ -103,6 +103,7 @@
 	int err;
 	struct vcpu_info *vcpup;
 
+	BUG_ON(HYPERVISOR_shared_info == &dummy_shared_info);
 	per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
 
 	if (!have_vcpu_info_placement)
@@ -666,10 +667,10 @@
 	make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
 }
 
-static void pin_pagetable_pfn(unsigned level, unsigned long pfn)
+static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn)
 {
 	struct mmuext_op op;
-	op.cmd = level;
+	op.cmd = cmd;
 	op.arg1.mfn = pfn_to_mfn(pfn);
 	if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF))
 		BUG();
@@ -686,7 +687,8 @@
 
 		if (!PageHighMem(page)) {
 			make_lowmem_page_readonly(__va(PFN_PHYS(pfn)));
-			pin_pagetable_pfn(level, pfn);
+			if (level == PT_PTE)
+				pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn);
 		} else
 			/* make sure there are no stray mappings of
 			   this page */
@@ -696,27 +698,39 @@
 
 static void xen_alloc_pt(struct mm_struct *mm, u32 pfn)
 {
-	xen_alloc_ptpage(mm, pfn, MMUEXT_PIN_L1_TABLE);
+	xen_alloc_ptpage(mm, pfn, PT_PTE);
 }
 
 static void xen_alloc_pd(struct mm_struct *mm, u32 pfn)
 {
-	xen_alloc_ptpage(mm, pfn, MMUEXT_PIN_L2_TABLE);
+	xen_alloc_ptpage(mm, pfn, PT_PMD);
 }
 
 /* This should never happen until we're OK to use struct page */
-static void xen_release_pt(u32 pfn)
+static void xen_release_ptpage(u32 pfn, unsigned level)
 {
 	struct page *page = pfn_to_page(pfn);
 
 	if (PagePinned(page)) {
 		if (!PageHighMem(page)) {
-			pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
+			if (level == PT_PTE)
+				pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
 			make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
 		}
+		ClearPagePinned(page);
 	}
 }
 
+static void xen_release_pt(u32 pfn)
+{
+	xen_release_ptpage(pfn, PT_PTE);
+}
+
+static void xen_release_pd(u32 pfn)
+{
+	xen_release_ptpage(pfn, PT_PMD);
+}
+
 #ifdef CONFIG_HIGHPTE
 static void *xen_kmap_atomic_pte(struct page *page, enum km_type type)
 {
@@ -805,6 +819,31 @@
 			  PFN_DOWN(__pa(xen_start_info->pt_base)));
 }
 
+static __init void setup_shared_info(void)
+{
+	if (!xen_feature(XENFEAT_auto_translated_physmap)) {
+		unsigned long addr = fix_to_virt(FIX_PARAVIRT_BOOTMAP);
+
+		/*
+		 * Create a mapping for the shared info page.
+		 * Should be set_fixmap(), but shared_info is a machine
+		 * address with no corresponding pseudo-phys address.
+		 */
+		set_pte_mfn(addr,
+			    PFN_DOWN(xen_start_info->shared_info),
+			    PAGE_KERNEL);
+
+		HYPERVISOR_shared_info = (struct shared_info *)addr;
+	} else
+		HYPERVISOR_shared_info =
+			(struct shared_info *)__va(xen_start_info->shared_info);
+
+#ifndef CONFIG_SMP
+	/* In UP this is as good a place as any to set up shared info */
+	xen_setup_vcpu_info_placement();
+#endif
+}
+
 static __init void xen_pagetable_setup_done(pgd_t *base)
 {
 	/* This will work as long as patching hasn't happened yet
@@ -812,25 +851,10 @@
 	pv_mmu_ops.alloc_pt = xen_alloc_pt;
 	pv_mmu_ops.alloc_pd = xen_alloc_pd;
 	pv_mmu_ops.release_pt = xen_release_pt;
-	pv_mmu_ops.release_pd = xen_release_pt;
+	pv_mmu_ops.release_pd = xen_release_pd;
 	pv_mmu_ops.set_pte = xen_set_pte;
 
-	if (!xen_feature(XENFEAT_auto_translated_physmap)) {
-		/*
-		 * Create a mapping for the shared info page.
-		 * Should be set_fixmap(), but shared_info is a machine
-		 * address with no corresponding pseudo-phys address.
-		 */
-		set_pte_mfn(fix_to_virt(FIX_PARAVIRT_BOOTMAP),
-			    PFN_DOWN(xen_start_info->shared_info),
-			    PAGE_KERNEL);
-
-		HYPERVISOR_shared_info =
-			(struct shared_info *)fix_to_virt(FIX_PARAVIRT_BOOTMAP);
-
-	} else
-		HYPERVISOR_shared_info =
-			(struct shared_info *)__va(xen_start_info->shared_info);
+	setup_shared_info();
 
 	/* Actually pin the pagetable down, but we can't set PG_pinned
 	   yet because the page structures don't exist yet. */
@@ -1182,15 +1206,9 @@
 	x86_write_percpu(xen_cr3, __pa(pgd));
 	x86_write_percpu(xen_current_cr3, __pa(pgd));
 
-#ifdef CONFIG_SMP
 	/* Don't do the full vcpu_info placement stuff until we have a
-	   possible map. */
+	   possible map and a non-dummy shared_info. */
 	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
-#else
-	/* May as well do it now, since there's no good time to call
-	   it later on UP. */
-	xen_setup_vcpu_info_placement();
-#endif
 
 	pv_info.kernel_rpl = 1;
 	if (xen_feature(XENFEAT_supervisor_mode_kernel))
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 0144395..2a054ef 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -310,13 +310,6 @@
 }
 #endif	/* CONFIG_X86_PAE */
 
-enum pt_level {
-	PT_PGD,
-	PT_PUD,
-	PT_PMD,
-	PT_PTE
-};
-
 /*
   (Yet another) pagetable walker.  This one is intended for pinning a
   pagetable.  This means that it walks a pagetable and calls the
diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h
index c9ff27f..b5e189b1 100644
--- a/arch/x86/xen/mmu.h
+++ b/arch/x86/xen/mmu.h
@@ -3,6 +3,13 @@
 #include <linux/linkage.h>
 #include <asm/page.h>
 
+enum pt_level {
+	PT_PGD,
+	PT_PUD,
+	PT_PMD,
+	PT_PTE
+};
+
 /*
  * Page-directory addresses above 4GB do not fit into architectural %cr3.
  * When accessing %cr3, or equivalent field in vcpu_guest_context, guests
diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S
index 1a43b60..6b71904 100644
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm.S
@@ -33,12 +33,17 @@
 	events, then enter the hypervisor to get them handled.
  */
 ENTRY(xen_irq_enable_direct)
-	/* Clear mask and test pending */
-	andw $0x00ff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
+	/* Unmask events */
+	movb $0, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
+
 	/* Preempt here doesn't matter because that will deal with
 	   any pending interrupts.  The pending check may end up being
 	   run on the wrong CPU, but that doesn't hurt. */
+
+	/* Test for pending */
+	testb $0xff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
 	jz 1f
+
 2:	call check_events
 1:
 ENDPATCH(xen_irq_enable_direct)
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 1344a0ea5..5713f7e 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -140,7 +140,7 @@
 	/* Assume anything <= 4GB can be handled by IOMMU.
 	   Actually some IOMMUs can handle everything, but I don't
 	   know of a way to test this here. */
-	if (b_pfn <= (min_t(u64, 0xffffffff, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
+	if (b_pfn < (min_t(u64, 0x100000000UL, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
 		dma = 1;
 	q->bounce_pfn = max_low_pfn;
 #else
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 0f962ec..f4e1006 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -1143,24 +1143,37 @@
 }
 
 /*
- * Call func for each cic attached to this ioc. Returns number of cic's seen.
+ * Call func for each cic attached to this ioc.
  */
-static unsigned int
+static void
 call_for_each_cic(struct io_context *ioc,
 		  void (*func)(struct io_context *, struct cfq_io_context *))
 {
 	struct cfq_io_context *cic;
 	struct hlist_node *n;
-	int called = 0;
 
 	rcu_read_lock();
-	hlist_for_each_entry_rcu(cic, n, &ioc->cic_list, cic_list) {
+	hlist_for_each_entry_rcu(cic, n, &ioc->cic_list, cic_list)
 		func(ioc, cic);
-		called++;
-	}
 	rcu_read_unlock();
+}
 
-	return called;
+static void cfq_cic_free_rcu(struct rcu_head *head)
+{
+	struct cfq_io_context *cic;
+
+	cic = container_of(head, struct cfq_io_context, rcu_head);
+
+	kmem_cache_free(cfq_ioc_pool, cic);
+	elv_ioc_count_dec(ioc_count);
+
+	if (ioc_gone && !elv_ioc_count_read(ioc_count))
+		complete(ioc_gone);
+}
+
+static void cfq_cic_free(struct cfq_io_context *cic)
+{
+	call_rcu(&cic->rcu_head, cfq_cic_free_rcu);
 }
 
 static void cic_free_func(struct io_context *ioc, struct cfq_io_context *cic)
@@ -1174,24 +1187,18 @@
 	hlist_del_rcu(&cic->cic_list);
 	spin_unlock_irqrestore(&ioc->lock, flags);
 
-	kmem_cache_free(cfq_ioc_pool, cic);
+	cfq_cic_free(cic);
 }
 
 static void cfq_free_io_context(struct io_context *ioc)
 {
-	int freed;
-
 	/*
-	 * ioc->refcount is zero here, so no more cic's are allowed to be
-	 * linked into this ioc. So it should be ok to iterate over the known
-	 * list, we will see all cic's since no new ones are added.
+	 * ioc->refcount is zero here, or we are called from elv_unregister(),
+	 * so no more cic's are allowed to be linked into this ioc.  So it
+	 * should be ok to iterate over the known list, we will see all cic's
+	 * since no new ones are added.
 	 */
-	freed = call_for_each_cic(ioc, cic_free_func);
-
-	elv_ioc_count_mod(ioc_count, -freed);
-
-	if (ioc_gone && !elv_ioc_count_read(ioc_count))
-		complete(ioc_gone);
+	call_for_each_cic(ioc, cic_free_func);
 }
 
 static void cfq_exit_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq)
@@ -1207,6 +1214,8 @@
 static void __cfq_exit_single_io_context(struct cfq_data *cfqd,
 					 struct cfq_io_context *cic)
 {
+	struct io_context *ioc = cic->ioc;
+
 	list_del_init(&cic->queue_list);
 
 	/*
@@ -1216,6 +1225,9 @@
 	cic->dead_key = (unsigned long) cic->key;
 	cic->key = NULL;
 
+	if (ioc->ioc_data == cic)
+		rcu_assign_pointer(ioc->ioc_data, NULL);
+
 	if (cic->cfqq[ASYNC]) {
 		cfq_exit_cfqq(cfqd, cic->cfqq[ASYNC]);
 		cic->cfqq[ASYNC] = NULL;
@@ -1248,7 +1260,6 @@
  */
 static void cfq_exit_io_context(struct io_context *ioc)
 {
-	rcu_assign_pointer(ioc->ioc_data, NULL);
 	call_for_each_cic(ioc, cfq_exit_single_io_context);
 }
 
@@ -1458,15 +1469,6 @@
 	return cfqq;
 }
 
-static void cfq_cic_free(struct cfq_io_context *cic)
-{
-	kmem_cache_free(cfq_ioc_pool, cic);
-	elv_ioc_count_dec(ioc_count);
-
-	if (ioc_gone && !elv_ioc_count_read(ioc_count))
-		complete(ioc_gone);
-}
-
 /*
  * We drop cfq io contexts lazily, so we may find a dead one.
  */
@@ -1480,8 +1482,7 @@
 
 	spin_lock_irqsave(&ioc->lock, flags);
 
-	if (ioc->ioc_data == cic)
-		rcu_assign_pointer(ioc->ioc_data, NULL);
+	BUG_ON(ioc->ioc_data == cic);
 
 	radix_tree_delete(&ioc->radix_root, (unsigned long) cfqd);
 	hlist_del_rcu(&cic->cic_list);
@@ -2138,7 +2139,7 @@
 	if (!cfq_pool)
 		goto fail;
 
-	cfq_ioc_pool = KMEM_CACHE(cfq_io_context, SLAB_DESTROY_BY_RCU);
+	cfq_ioc_pool = KMEM_CACHE(cfq_io_context, 0);
 	if (!cfq_ioc_pool)
 		goto fail;
 
@@ -2286,7 +2287,6 @@
 	smp_wmb();
 	if (elv_ioc_count_read(ioc_count))
 		wait_for_completion(ioc_gone);
-	synchronize_rcu();
 	cfq_slab_kill();
 }
 
diff --git a/crypto/xcbc.c b/crypto/xcbc.c
index 2feb0f23..b63b633 100644
--- a/crypto/xcbc.c
+++ b/crypto/xcbc.c
@@ -116,13 +116,11 @@
 	struct crypto_xcbc_ctx *ctx = crypto_hash_ctx_aligned(parent);
 	struct crypto_cipher *tfm = ctx->child;
 	int bs = crypto_hash_blocksize(parent);
-	unsigned int i = 0;
 
-	do {
-
-		struct page *pg = sg_page(&sg[i]);
-		unsigned int offset = sg[i].offset;
-		unsigned int slen = sg[i].length;
+	for (;;) {
+		struct page *pg = sg_page(sg);
+		unsigned int offset = sg->offset;
+		unsigned int slen = sg->length;
 
 		if (unlikely(slen > nbytes))
 			slen = nbytes;
@@ -182,8 +180,11 @@
 			offset = 0;
 			pg++;
 		}
-		i++;
-	} while (nbytes>0);
+
+		if (!nbytes)
+			break;
+		sg = scatterwalk_sg_next(sg);
+	}
 
 	return 0;
 }
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 36a68fa..a825b43 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -822,7 +822,7 @@
 	}
 
 	processors[pr->id] = NULL;
-
+	processor_device_array[pr->id] = NULL;
 	kfree(pr);
 
 	return 0;
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index e8e2d88..788da97 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -1487,7 +1487,6 @@
 		return 0;
 	}
 
-	acpi_unlazy_tlb(smp_processor_id());
 	/*
 	 * Must be done before busmaster disable as we might need to
 	 * access HPET !
@@ -1577,6 +1576,8 @@
 		return 0;
 	}
 
+	acpi_unlazy_tlb(smp_processor_id());
+
 	/* Tell the scheduler that we are going deep-idle: */
 	sched_clock_idle_sleep_event();
 	/*
@@ -1692,7 +1693,9 @@
 		switch (cx->type) {
 			case ACPI_STATE_C1:
 			state->flags |= CPUIDLE_FLAG_SHALLOW;
-			state->flags |= CPUIDLE_FLAG_TIME_VALID;
+			if (cx->entry_method == ACPI_CSTATE_FFH)
+				state->flags |= CPUIDLE_FLAG_TIME_VALID;
+
 			state->enter = acpi_idle_enter_c1;
 			dev->safe_state = state;
 			break;
diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c
index a2cf300..bcf2c70 100644
--- a/drivers/acpi/sbshc.c
+++ b/drivers/acpi/sbshc.c
@@ -130,7 +130,6 @@
 		goto end;
 	}
 	smb_hc_write(hc, ACPI_SMB_COMMAND, command);
-	smb_hc_write(hc, ACPI_SMB_COMMAND, command);
 	if (!(protocol & 0x01)) {
 		smb_hc_write(hc, ACPI_SMB_BLOCK_COUNT, length);
 		for (i = 0; i < length; ++i)
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 57570ac..e6ce262 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -39,20 +39,26 @@
 			   int size)
 {
 	int len;
+	int count;
 
-	if (!acpi_dev->flags.hardware_id)
+	if (!acpi_dev->flags.hardware_id && !acpi_dev->flags.compatible_ids)
 		return -ENODEV;
 
-	len = snprintf(modalias, size, "acpi:%s:",
-		       acpi_dev->pnp.hardware_id);
-	if (len < 0 || len >= size)
-		return -EINVAL;
+	len = snprintf(modalias, size, "acpi:");
 	size -= len;
 
+	if (acpi_dev->flags.hardware_id) {
+		count = snprintf(&modalias[len], size, "%s:",
+				 acpi_dev->pnp.hardware_id);
+		if (count < 0 || count >= size)
+			return -EINVAL;
+		len += count;
+		size -= count;
+	}
+
 	if (acpi_dev->flags.compatible_ids) {
 		struct acpi_compatible_id_list *cid_list;
 		int i;
-		int count;
 
 		cid_list = acpi_dev->pnp.cid_list;
 		for (i = 0; i < cid_list->count; i++) {
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index d2f71a5..71183ee 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -26,21 +26,6 @@
 
 #ifdef CONFIG_PM_SLEEP
 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
-static bool acpi_sleep_finish_wake_up;
-
-/*
- * ACPI 2.0 and later want us to execute _PTS after suspending devices, so we
- * allow the user to request that behavior by using the 'acpi_new_pts_ordering'
- * kernel command line option that causes the following variable to be set.
- */
-static bool new_pts_ordering;
-
-static int __init acpi_new_pts_ordering(char *str)
-{
-	new_pts_ordering = true;
-	return 1;
-}
-__setup("acpi_new_pts_ordering", acpi_new_pts_ordering);
 #endif
 
 static int acpi_sleep_prepare(u32 acpi_state)
@@ -91,14 +76,6 @@
 
 	if (sleep_states[acpi_state]) {
 		acpi_target_sleep_state = acpi_state;
-		if (new_pts_ordering)
-			return 0;
-
-		error = acpi_sleep_prepare(acpi_state);
-		if (error)
-			acpi_target_sleep_state = ACPI_STATE_S0;
-		else
-			acpi_sleep_finish_wake_up = true;
 	} else {
 		printk(KERN_ERR "ACPI does not support this state: %d\n",
 			pm_state);
@@ -116,14 +93,11 @@
 
 static int acpi_pm_prepare(void)
 {
-	if (new_pts_ordering) {
-		int error = acpi_sleep_prepare(acpi_target_sleep_state);
+	int error = acpi_sleep_prepare(acpi_target_sleep_state);
 
-		if (error) {
-			acpi_target_sleep_state = ACPI_STATE_S0;
-			return error;
-		}
-		acpi_sleep_finish_wake_up = true;
+	if (error) {
+		acpi_target_sleep_state = ACPI_STATE_S0;
+		return error;
 	}
 
 	return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
@@ -212,7 +186,6 @@
 	acpi_set_firmware_waking_vector((acpi_physical_address) 0);
 
 	acpi_target_sleep_state = ACPI_STATE_S0;
-	acpi_sleep_finish_wake_up = false;
 
 #ifdef CONFIG_X86
 	if (init_8259A_after_S1) {
@@ -229,11 +202,10 @@
 static void acpi_pm_end(void)
 {
 	/*
-	 * This is necessary in case acpi_pm_finish() is not called directly
-	 * during a failing transition to a sleep state.
+	 * This is necessary in case acpi_pm_finish() is not called during a
+	 * failing transition to a sleep state.
 	 */
-	if (acpi_sleep_finish_wake_up)
-		acpi_pm_finish();
+	acpi_target_sleep_state = ACPI_STATE_S0;
 }
 
 static int acpi_pm_state_valid(suspend_state_t pm_state)
@@ -285,31 +257,18 @@
 #ifdef CONFIG_HIBERNATION
 static int acpi_hibernation_begin(void)
 {
-	int error;
-
 	acpi_target_sleep_state = ACPI_STATE_S4;
-	if (new_pts_ordering)
-		return 0;
 
-	error = acpi_sleep_prepare(ACPI_STATE_S4);
-	if (error)
-		acpi_target_sleep_state = ACPI_STATE_S0;
-	else
-		acpi_sleep_finish_wake_up = true;
-
-	return error;
+	return 0;
 }
 
 static int acpi_hibernation_prepare(void)
 {
-	if (new_pts_ordering) {
-		int error = acpi_sleep_prepare(ACPI_STATE_S4);
+	int error = acpi_sleep_prepare(ACPI_STATE_S4);
 
-		if (error) {
-			acpi_target_sleep_state = ACPI_STATE_S0;
-			return error;
-		}
-		acpi_sleep_finish_wake_up = true;
+	if (error) {
+		acpi_target_sleep_state = ACPI_STATE_S0;
+		return error;
 	}
 
 	return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
@@ -353,17 +312,15 @@
 	acpi_set_firmware_waking_vector((acpi_physical_address) 0);
 
 	acpi_target_sleep_state = ACPI_STATE_S0;
-	acpi_sleep_finish_wake_up = false;
 }
 
 static void acpi_hibernation_end(void)
 {
 	/*
 	 * This is necessary in case acpi_hibernation_finish() is not called
-	 * directly during a failing transition to the sleep state.
+	 * during a failing transition to the sleep state.
 	 */
-	if (acpi_sleep_finish_wake_up)
-		acpi_hibernation_finish();
+	acpi_target_sleep_state = ACPI_STATE_S0;
 }
 
 static int acpi_hibernation_pre_restore(void)
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index c4e00ac..1bcecc7 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -1125,7 +1125,7 @@
 			tz->trips.active[i].flags.valid; i++, trips++);
 	tz->thermal_zone = thermal_zone_device_register("ACPI thermal zone",
 					trips, tz, &acpi_thermal_zone_ops);
-	if (!tz->thermal_zone)
+	if (IS_ERR(tz->thermal_zone))
 		return -ENODEV;
 
 	result = sysfs_create_link(&tz->device->dev.kobj,
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 12fb44f..980a741 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -713,7 +713,7 @@
 
 	kfree(obj);
 
-	if (device->cap._BCL && device->cap._BCM && max_level > 0) {
+	if (device->cap._BCL && device->cap._BCM && device->cap._BQC && max_level > 0){
 		int result;
 		static int count = 0;
 		char *name;
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c4248b3..be95fdb 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -326,6 +326,44 @@
 }
 
 /**
+ *	atapi_cmd_type - Determine ATAPI command type from SCSI opcode
+ *	@opcode: SCSI opcode
+ *
+ *	Determine ATAPI command type from @opcode.
+ *
+ *	LOCKING:
+ *	None.
+ *
+ *	RETURNS:
+ *	ATAPI_{READ|WRITE|READ_CD|PASS_THRU|MISC}
+ */
+int atapi_cmd_type(u8 opcode)
+{
+	switch (opcode) {
+	case GPCMD_READ_10:
+	case GPCMD_READ_12:
+		return ATAPI_READ;
+
+	case GPCMD_WRITE_10:
+	case GPCMD_WRITE_12:
+	case GPCMD_WRITE_AND_VERIFY_10:
+		return ATAPI_WRITE;
+
+	case GPCMD_READ_CD:
+	case GPCMD_READ_CD_MSF:
+		return ATAPI_READ_CD;
+
+	case ATA_16:
+	case ATA_12:
+		if (atapi_passthru16)
+			return ATAPI_PASS_THRU;
+		/* fall thru */
+	default:
+		return ATAPI_MISC;
+	}
+}
+
+/**
  *	ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
  *	@tf: Taskfile to convert
  *	@pmp: Port multiplier port
@@ -972,7 +1010,7 @@
 void ata_lpm_schedule(struct ata_port *ap, enum link_pm policy)
 {
 	ap->pm_policy = policy;
-	ap->link.eh_info.action |= ATA_EHI_LPM;
+	ap->link.eh_info.action |= ATA_EH_LPM;
 	ap->link.eh_info.flags |= ATA_EHI_NO_AUTOPSY;
 	ata_port_schedule_eh(ap);
 }
@@ -2660,7 +2698,7 @@
 	   specific sequence bass-ackwards so that PDIAG- is released by
 	   the slave device */
 
-	ata_link_for_each_dev(dev, &ap->link) {
+	ata_link_for_each_dev_reverse(dev, &ap->link) {
 		if (tries[dev->devno])
 			dev->class = classes[dev->devno];
 
@@ -7774,6 +7812,7 @@
 EXPORT_SYMBOL_GPL(ata_noop_dev_select);
 EXPORT_SYMBOL_GPL(ata_std_dev_select);
 EXPORT_SYMBOL_GPL(sata_print_link_status);
+EXPORT_SYMBOL_GPL(atapi_cmd_type);
 EXPORT_SYMBOL_GPL(ata_tf_to_fis);
 EXPORT_SYMBOL_GPL(ata_tf_from_fis);
 EXPORT_SYMBOL_GPL(ata_pack_xfermask);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 681252f..a583032 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2748,7 +2748,7 @@
 			ehc->i.flags &= ~ATA_EHI_SETMODE;
 		}
 
-		if (ehc->i.action & ATA_EHI_LPM)
+		if (ehc->i.action & ATA_EH_LPM)
 			ata_link_for_each_dev(dev, link)
 				ata_dev_enable_pm(dev, ap->pm_policy);
 
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 8786455..ce830fe 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -36,6 +36,10 @@
 #define DRV_NAME "pata_ali"
 #define DRV_VERSION "0.7.5"
 
+int ali_atapi_dma = 0;
+module_param_named(atapi_dma, ali_atapi_dma, int, 0644);
+MODULE_PARM_DESC(atapi_dma, "Enable ATAPI DMA (0=disable, 1=enable)");
+
 /*
  *	Cable special cases
  */
@@ -270,6 +274,27 @@
 }
 
 /**
+ *	ali_warn_atapi_dma	-	Warn about ATAPI DMA disablement
+ *	@adev: Device
+ *
+ *	Whine about ATAPI DMA disablement if @adev is an ATAPI device.
+ *	Can be used as ->dev_config.
+ */
+
+static void ali_warn_atapi_dma(struct ata_device *adev)
+{
+	struct ata_eh_context *ehc = &adev->link->eh_context;
+	int print_info = ehc->i.flags & ATA_EHI_PRINTINFO;
+
+	if (print_info && adev->class == ATA_DEV_ATAPI && !ali_atapi_dma) {
+		ata_dev_printk(adev, KERN_WARNING,
+			       "WARNING: ATAPI DMA disabled for reliablity issues.  It can be enabled\n");
+		ata_dev_printk(adev, KERN_WARNING,
+			       "WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.\n");
+	}
+}
+
+/**
  *	ali_lock_sectors	-	Keep older devices to 255 sector mode
  *	@adev: Device
  *
@@ -283,6 +308,7 @@
 static void ali_lock_sectors(struct ata_device *adev)
 {
 	adev->max_sectors = 255;
+	ali_warn_atapi_dma(adev);
 }
 
 /**
@@ -294,6 +320,18 @@
 
 static int ali_check_atapi_dma(struct ata_queued_cmd *qc)
 {
+	if (!ali_atapi_dma) {
+		/* FIXME: pata_ali can't do ATAPI DMA reliably but the
+		 * IDE alim15x3 driver can.  I tried lots of things
+		 * but couldn't find what the actual difference was.
+		 * If you got an idea, please write it to
+		 * linux-ide@vger.kernel.org and cc htejun@gmail.com.
+		 *
+		 * Disable ATAPI DMA for now.
+		 */
+		return -EOPNOTSUPP;
+	}
+
 	/* If its not a media command, its not worth it */
 	if (atapi_cmd_type(qc->cdb[0]) == ATAPI_MISC)
 		return -EOPNOTSUPP;
@@ -359,6 +397,7 @@
 
 	.tf_load	= ata_tf_load,
 	.tf_read	= ata_tf_read,
+	.check_atapi_dma = ali_check_atapi_dma,
 	.check_status 	= ata_check_status,
 	.exec_command	= ata_exec_command,
 	.dev_select 	= ata_std_dev_select,
@@ -438,6 +477,7 @@
 	.check_status 	= ata_check_status,
 	.exec_command	= ata_exec_command,
 	.dev_select 	= ata_std_dev_select,
+	.dev_config	= ali_warn_atapi_dma,
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 503245a..7c5b2dd9 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -269,7 +269,11 @@
 	dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n",
 		tmpbyte & 1, tmpbyte & 0x30);
 
-	*try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
+	*try_mmio = 0;
+#ifdef CONFIG_PPC_MERGE
+	if (machine_is(cell))
+		*try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
+#endif
 
 	switch(tmpbyte & 0x30) {
 		case 0x00:
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 07791a7..9d1e3ca 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1256,7 +1256,6 @@
 	void __iomem *ssr_base = NULL;
 	void __iomem *csr_base = NULL;
 	struct sata_fsl_host_priv *host_priv = NULL;
-	struct resource *r;
 	int irq;
 	struct ata_host *host;
 
@@ -1266,8 +1265,6 @@
 	dev_printk(KERN_INFO, &ofdev->dev,
 		   "Sata FSL Platform/CSB Driver init\n");
 
-	r = kmalloc(sizeof(struct resource), GFP_KERNEL);
-
 	hcr_base = of_iomap(ofdev->node, 0);
 	if (!hcr_base)
 		goto error_exit_with_cleanup;
@@ -1348,10 +1345,7 @@
 
 static struct of_device_id fsl_sata_match[] = {
 	{
-		.compatible = "fsl,mpc8315-sata",
-	},
-	{
-		.compatible = "fsl,mpc8379-sata",
+		.compatible = "fsl,pq-sata",
 	},
 	{},
 };
diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c
index 47c57a4..98099f5 100644
--- a/drivers/atm/firestream.c
+++ b/drivers/atm/firestream.c
@@ -978,6 +978,7 @@
 		/* Docs are vague about this atm_hdr field. By the way, the FS
 		 * chip makes odd errors if lower bits are set.... -- REW */
 		tc->atm_hdr =  (vpi << 20) | (vci << 4); 
+		tmc0 = 0;
 		{
 			int pcr = atm_pcr_goal (txtp);
 
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index 2e3395b..ffc4a5a 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -3000,8 +3000,7 @@
 
 /* eeprom routines  -- see 4.7 */
 
-u8
-read_prom_byte(struct he_dev *he_dev, int addr)
+static u8 read_prom_byte(struct he_dev *he_dev, int addr)
 {
 	u32 val = 0, tmp_read = 0;
 	int i, j = 0;
diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index b967919..28d77b5 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -2016,8 +2016,7 @@
 	return 0;
 }
 
-int
-idt77252_send(struct atm_vcc *vcc, struct sk_buff *skb)
+static int idt77252_send(struct atm_vcc *vcc, struct sk_buff *skb)
 {
 	return idt77252_send_skb(vcc, skb, 0);
 }
@@ -3072,8 +3071,7 @@
 	return 0;
 }
 
-void
-idt77252_dev_close(struct atm_dev *dev)
+static void idt77252_dev_close(struct atm_dev *dev)
 {
 	struct idt77252_dev *card = dev->dev_data;
 	u32 conf;
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index ef524526..670c093 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -958,6 +958,7 @@
 
 /***************************** IA_LIB END *****************************/
     
+#ifdef CONFIG_ATM_IA_DEBUG
 static int tcnter = 0;
 static void xdump( u_char*  cp, int  length, char*  prefix )
 {
@@ -992,6 +993,7 @@
     }
 
 }  /* close xdump(... */
+#endif /* CONFIG_ATM_IA_DEBUG */
 
   
 static struct atm_dev *ia_boards = NULL;  
diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index bf31a01..9a6537f 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -133,6 +133,7 @@
 {
 	va_list args;
 	char *name;
+	int ret;
 
 	va_start(args, fmt);
 	name = kvasprintf(GFP_KERNEL, fmt, args);
@@ -141,7 +142,9 @@
 	if (!name)
 		return -ENOMEM;
 
-	return kobject_add(kobj, &drv->p->kobj, "%s", name);
+	ret = kobject_add(kobj, &drv->p->kobj, "%s", name);
+	kfree(name);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(driver_add_kobj);
 
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 55bd35c..9c9627e 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -50,6 +50,7 @@
 #include <scsi/sg.h>
 #include <scsi/scsi_ioctl.h>
 #include <linux/cdrom.h>
+#include <linux/scatterlist.h>
 
 #define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
 #define DRIVER_NAME "HP CISS Driver (v 3.6.14)"
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index b53fdb0..60cc543 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -153,6 +153,12 @@
 	struct kvec iov;
 	sigset_t blocked, oldset;
 
+	if (unlikely(!sock)) {
+		printk(KERN_ERR "%s: Attempted %s on closed socket in sock_xmit\n",
+		       lo->disk->disk_name, (send ? "send" : "recv"));
+		return -EINVAL;
+	}
+
 	/* Allow interception of SIGKILL only
 	 * Don't allow other signals to interrupt the transmission */
 	siginitsetinv(&blocked, sigmask(SIGKILL));
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index c452e2d..27bfe72 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -8,6 +8,7 @@
  * and is not licensed separately. See file COPYING for details.
  *
  * TODO (sorted by decreasing priority)
+ *  -- Return sense now that rq allows it (we always auto-sense anyway).
  *  -- set readonly flag for CDs, set removable flag for CF readers
  *  -- do inquiry and verify we got a disk and not a tape (for LUN mismatch)
  *  -- verify the 13 conditions and do bulk resets
@@ -359,7 +360,8 @@
 static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
     struct ub_scsi_cmd *cmd, struct ub_request *urq);
 static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static void ub_end_rq(struct request *rq, unsigned int status);
+static void ub_end_rq(struct request *rq, unsigned int status,
+    unsigned int cmd_len);
 static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun,
     struct ub_request *urq, struct ub_scsi_cmd *cmd);
 static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
@@ -642,13 +644,13 @@
 
 	if (atomic_read(&sc->poison)) {
 		blkdev_dequeue_request(rq);
-		ub_end_rq(rq, DID_NO_CONNECT << 16);
+		ub_end_rq(rq, DID_NO_CONNECT << 16, blk_rq_bytes(rq));
 		return 0;
 	}
 
 	if (lun->changed && !blk_pc_request(rq)) {
 		blkdev_dequeue_request(rq);
-		ub_end_rq(rq, SAM_STAT_CHECK_CONDITION);
+		ub_end_rq(rq, SAM_STAT_CHECK_CONDITION, blk_rq_bytes(rq));
 		return 0;
 	}
 
@@ -701,7 +703,7 @@
 
 drop:
 	ub_put_cmd(lun, cmd);
-	ub_end_rq(rq, DID_ERROR << 16);
+	ub_end_rq(rq, DID_ERROR << 16, blk_rq_bytes(rq));
 	return 0;
 }
 
@@ -770,6 +772,7 @@
 	struct ub_request *urq = cmd->back;
 	struct request *rq;
 	unsigned int scsi_status;
+	unsigned int cmd_len;
 
 	rq = urq->rq;
 
@@ -779,8 +782,18 @@
 				rq->data_len = 0;
 			else
 				rq->data_len -= cmd->act_len;
+			scsi_status = 0;
+		} else {
+			if (cmd->act_len != cmd->len) {
+				if ((cmd->key == MEDIUM_ERROR ||
+				     cmd->key == UNIT_ATTENTION) &&
+				    ub_rw_cmd_retry(sc, lun, urq, cmd) == 0)
+					return;
+				scsi_status = SAM_STAT_CHECK_CONDITION;
+			} else {
+				scsi_status = 0;
+			}
 		}
-		scsi_status = 0;
 	} else {
 		if (blk_pc_request(rq)) {
 			/* UB_SENSE_SIZE is smaller than SCSI_SENSE_BUFFERSIZE */
@@ -801,14 +814,17 @@
 
 	urq->rq = NULL;
 
+	cmd_len = cmd->len;
 	ub_put_cmd(lun, cmd);
-	ub_end_rq(rq, scsi_status);
+	ub_end_rq(rq, scsi_status, cmd_len);
 	blk_start_queue(lun->disk->queue);
 }
 
-static void ub_end_rq(struct request *rq, unsigned int scsi_status)
+static void ub_end_rq(struct request *rq, unsigned int scsi_status,
+    unsigned int cmd_len)
 {
 	int error;
+	long rqlen;
 
 	if (scsi_status == 0) {
 		error = 0;
@@ -816,8 +832,12 @@
 		error = -EIO;
 		rq->errors = scsi_status;
 	}
-	if (__blk_end_request(rq, error, blk_rq_bytes(rq)))
-		BUG();
+	rqlen = blk_rq_bytes(rq);    /* Oddly enough, this is the residue. */
+	if (__blk_end_request(rq, error, cmd_len)) {
+		printk(KERN_WARNING DRV_NAME
+		    ": __blk_end_request blew, %s-cmd total %u rqlen %ld\n",
+		    blk_pc_request(rq)? "pc": "fs", cmd_len, rqlen);
+	}
 }
 
 static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun,
diff --git a/drivers/char/drm/ati_pcigart.c b/drivers/char/drm/ati_pcigart.c
index e5a0e97..141f4df 100644
--- a/drivers/char/drm/ati_pcigart.c
+++ b/drivers/char/drm/ati_pcigart.c
@@ -122,8 +122,9 @@
 	} else {
 		address = gart_info->addr;
 		bus_address = gart_info->bus_addr;
-		DRM_DEBUG("PCI: Gart Table: VRAM %08X mapped at %08lX\n",
-			  bus_address, (unsigned long)address);
+		DRM_DEBUG("PCI: Gart Table: VRAM %08LX mapped at %08lX\n",
+			  (unsigned long long)bus_address,
+			  (unsigned long)address);
 	}
 
 	pci_gart = (u32 *) address;
@@ -167,6 +168,12 @@
 		}
 	}
 
+	if (gart_info->gart_table_location == DRM_ATI_GART_MAIN)
+		dma_sync_single_for_device(&dev->pdev->dev,
+					   bus_address,
+					   max_pages * sizeof(u32),
+					   PCI_DMA_TODEVICE);
+
 	ret = 1;
 
 #if defined(__i386__) || defined(__x86_64__)
diff --git a/drivers/char/drm/drm_scatter.c b/drivers/char/drm/drm_scatter.c
index 26d8f67..b2b0f3d 100644
--- a/drivers/char/drm/drm_scatter.c
+++ b/drivers/char/drm/drm_scatter.c
@@ -36,6 +36,15 @@
 
 #define DEBUG_SCATTER 0
 
+static inline void *drm_vmalloc_dma(unsigned long size)
+{
+#if defined(__powerpc__) && defined(CONFIG_NOT_COHERENT_CACHE)
+	return __vmalloc(size, GFP_KERNEL, PAGE_KERNEL | _PAGE_NO_CACHE);
+#else
+	return vmalloc_32(size);
+#endif
+}
+
 void drm_sg_cleanup(struct drm_sg_mem * entry)
 {
 	struct page *page;
@@ -104,7 +113,7 @@
 	}
 	memset((void *)entry->busaddr, 0, pages * sizeof(*entry->busaddr));
 
-	entry->virtual = vmalloc_32(pages << PAGE_SHIFT);
+	entry->virtual = drm_vmalloc_dma(pages << PAGE_SHIFT);
 	if (!entry->virtual) {
 		drm_free(entry->busaddr,
 			 entry->pages * sizeof(*entry->busaddr), DRM_MEM_PAGES);
diff --git a/drivers/char/drm/drm_vm.c b/drivers/char/drm/drm_vm.c
index 3d65c4d..945df72 100644
--- a/drivers/char/drm/drm_vm.c
+++ b/drivers/char/drm/drm_vm.c
@@ -54,13 +54,24 @@
 	pgprot_val(tmp) |= _PAGE_NO_CACHE;
 	if (map_type == _DRM_REGISTERS)
 		pgprot_val(tmp) |= _PAGE_GUARDED;
-#endif
-#if defined(__ia64__)
+#elif defined(__ia64__)
 	if (efi_range_is_wc(vma->vm_start, vma->vm_end -
 				    vma->vm_start))
 		tmp = pgprot_writecombine(tmp);
 	else
 		tmp = pgprot_noncached(tmp);
+#elif defined(__sparc__)
+	tmp = pgprot_noncached(tmp);
+#endif
+	return tmp;
+}
+
+static pgprot_t drm_dma_prot(uint32_t map_type, struct vm_area_struct *vma)
+{
+	pgprot_t tmp = vm_get_page_prot(vma->vm_flags);
+
+#if defined(__powerpc__) && defined(CONFIG_NOT_COHERENT_CACHE)
+	tmp |= _PAGE_NO_CACHE;
 #endif
 	return tmp;
 }
@@ -603,9 +614,6 @@
 		offset = dev->driver->get_reg_ofs(dev);
 		vma->vm_flags |= VM_IO;	/* not in core dump */
 		vma->vm_page_prot = drm_io_prot(map->type, vma);
-#ifdef __sparc__
-		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-#endif
 		if (io_remap_pfn_range(vma, vma->vm_start,
 				       (map->offset + offset) >> PAGE_SHIFT,
 				       vma->vm_end - vma->vm_start,
@@ -624,6 +632,7 @@
 		    page_to_pfn(virt_to_page(map->handle)),
 		    vma->vm_end - vma->vm_start, vma->vm_page_prot))
 			return -EAGAIN;
+		vma->vm_page_prot = drm_dma_prot(map->type, vma);
 	/* fall through to _DRM_SHM */
 	case _DRM_SHM:
 		vma->vm_ops = &drm_vm_shm_ops;
@@ -631,6 +640,7 @@
 		/* Don't let this area swap.  Change when
 		   DRM_KERNEL advisory is supported. */
 		vma->vm_flags |= VM_RESERVED;
+		vma->vm_page_prot = drm_dma_prot(map->type, vma);
 		break;
 	case _DRM_SCATTER_GATHER:
 		vma->vm_ops = &drm_vm_sg_ops;
diff --git a/drivers/char/drm/i915_dma.c b/drivers/char/drm/i915_dma.c
index e9d6663..a043bb1 100644
--- a/drivers/char/drm/i915_dma.c
+++ b/drivers/char/drm/i915_dma.c
@@ -804,6 +804,9 @@
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 
+	if (!dev_priv)
+		return;
+
 	if (dev_priv->agp_heap)
 		i915_mem_takedown(&(dev_priv->agp_heap));
 
diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h
index c10d128..675d88b 100644
--- a/drivers/char/drm/i915_drv.h
+++ b/drivers/char/drm/i915_drv.h
@@ -1092,8 +1092,8 @@
 #define IS_I915G(dev) ((dev)->pci_device == 0x2582 || (dev)->pci_device == 0x258a)
 #define IS_I915GM(dev) ((dev)->pci_device == 0x2592)
 #define IS_I945G(dev) ((dev)->pci_device == 0x2772)
-#define IS_I945GM(dev) ((dev)->pci_device == 0x27A2)
-
+#define IS_I945GM(dev) ((dev)->pci_device == 0x27A2 ||\
+		        (dev)->pci_device == 0x27AE)
 #define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \
 		       (dev)->pci_device == 0x2982 || \
 		       (dev)->pci_device == 0x2992 || \
diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c
index 0f4afc4..f535812 100644
--- a/drivers/char/drm/r300_cmdbuf.c
+++ b/drivers/char/drm/r300_cmdbuf.c
@@ -729,6 +729,47 @@
 	buf->used = 0;
 }
 
+static void r300_cmd_wait(drm_radeon_private_t * dev_priv,
+			  drm_r300_cmd_header_t header)
+{
+	u32 wait_until;
+	RING_LOCALS;
+
+	if (!header.wait.flags)
+		return;
+
+	wait_until = 0;
+
+	switch(header.wait.flags) {
+	case R300_WAIT_2D:
+		wait_until = RADEON_WAIT_2D_IDLE;
+		break;
+	case R300_WAIT_3D:
+		wait_until = RADEON_WAIT_3D_IDLE;
+		break;
+	case R300_NEW_WAIT_2D_3D:
+		wait_until = RADEON_WAIT_2D_IDLE|RADEON_WAIT_3D_IDLE;
+		break;
+	case R300_NEW_WAIT_2D_2D_CLEAN:
+		wait_until = RADEON_WAIT_2D_IDLE|RADEON_WAIT_2D_IDLECLEAN;
+		break;
+	case R300_NEW_WAIT_3D_3D_CLEAN:
+		wait_until = RADEON_WAIT_3D_IDLE|RADEON_WAIT_3D_IDLECLEAN;
+		break;
+	case R300_NEW_WAIT_2D_2D_CLEAN_3D_3D_CLEAN:
+		wait_until = RADEON_WAIT_2D_IDLE|RADEON_WAIT_2D_IDLECLEAN;
+		wait_until |= RADEON_WAIT_3D_IDLE|RADEON_WAIT_3D_IDLECLEAN;
+		break;
+	default:
+		return;
+	}
+
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+	OUT_RING(wait_until);
+	ADVANCE_RING();
+}
+
 static int r300_scratch(drm_radeon_private_t *dev_priv,
 			drm_radeon_kcmd_buffer_t *cmdbuf,
 			drm_r300_cmd_header_t header)
@@ -909,19 +950,8 @@
 			break;
 
 		case R300_CMD_WAIT:
-			/* simple enough, we can do it here */
 			DRM_DEBUG("R300_CMD_WAIT\n");
-			if (header.wait.flags == 0)
-				break;	/* nothing to do */
-
-			{
-				RING_LOCALS;
-
-				BEGIN_RING(2);
-				OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
-				OUT_RING((header.wait.flags & 0xf) << 14);
-				ADVANCE_RING();
-			}
+			r300_cmd_wait(dev_priv, header);
 			break;
 
 		case R300_CMD_SCRATCH:
diff --git a/drivers/char/drm/radeon_drm.h b/drivers/char/drm/radeon_drm.h
index 71e5b21..aab82e1 100644
--- a/drivers/char/drm/radeon_drm.h
+++ b/drivers/char/drm/radeon_drm.h
@@ -225,8 +225,20 @@
 #define R300_CMD_WAIT			7
 #	define R300_WAIT_2D		0x1
 #	define R300_WAIT_3D		0x2
+/* these two defines are DOING IT WRONG - however
+ * we have userspace which relies on using these.
+ * The wait interface is backwards compat new 
+ * code should use the NEW_WAIT defines below
+ * THESE ARE NOT BIT FIELDS
+ */
 #	define R300_WAIT_2D_CLEAN	0x3
 #	define R300_WAIT_3D_CLEAN	0x4
+
+#	define R300_NEW_WAIT_2D_3D	0x3
+#	define R300_NEW_WAIT_2D_2D_CLEAN	0x4
+#	define R300_NEW_WAIT_3D_3D_CLEAN	0x6
+#	define R300_NEW_WAIT_2D_2D_CLEAN_3D_3D_CLEAN	0x8
+
 #define R300_CMD_SCRATCH		8
 
 typedef union {
diff --git a/drivers/char/drm/radeon_mem.c b/drivers/char/drm/radeon_mem.c
index 78b34fa..4af5286 100644
--- a/drivers/char/drm/radeon_mem.c
+++ b/drivers/char/drm/radeon_mem.c
@@ -88,7 +88,7 @@
 
 	list_for_each(p, heap) {
 		int start = (p->start + mask) & ~mask;
-		if (p->file_priv == 0 && start + size <= p->start + p->size)
+		if (p->file_priv == NULL && start + size <= p->start + p->size)
 			return split_block(p, start, size, file_priv);
 	}
 
@@ -113,7 +113,7 @@
 	/* Assumes a single contiguous range.  Needs a special file_priv in
 	 * 'heap' to stop it being subsumed.
 	 */
-	if (p->next->file_priv == 0) {
+	if (p->next->file_priv == NULL) {
 		struct mem_block *q = p->next;
 		p->size += q->size;
 		p->next = q->next;
@@ -121,7 +121,7 @@
 		drm_free(q, sizeof(*q), DRM_MEM_BUFS);
 	}
 
-	if (p->prev->file_priv == 0) {
+	if (p->prev->file_priv == NULL) {
 		struct mem_block *q = p->prev;
 		q->size += p->size;
 		q->next = p->next;
@@ -174,7 +174,7 @@
 	 * 'heap' to stop it being subsumed.
 	 */
 	list_for_each(p, heap) {
-		while (p->file_priv == 0 && p->next->file_priv == 0) {
+		while (p->file_priv == NULL && p->next->file_priv == NULL) {
 			struct mem_block *q = p->next;
 			p->size += q->size;
 			p->next = q->next;
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 465ad35..1399971 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -731,14 +731,14 @@
 
 int hpet_alloc(struct hpet_data *hdp)
 {
-	u64 cap, mcfg, hpet_config;
+	u64 cap, mcfg;
 	struct hpet_dev *devp;
-	u32 i, ntimer, irq;
+	u32 i, ntimer;
 	struct hpets *hpetp;
 	size_t siz;
 	struct hpet __iomem *hpet;
 	static struct hpets *last = NULL;
-	unsigned long period, irq_bitmap;
+	unsigned long period;
 	unsigned long long temp;
 
 	/*
@@ -765,48 +765,12 @@
 	hpetp->hp_hpet_phys = hdp->hd_phys_address;
 
 	hpetp->hp_ntimer = hdp->hd_nirqs;
+
+	for (i = 0; i < hdp->hd_nirqs; i++)
+		hpetp->hp_dev[i].hd_hdwirq = hdp->hd_irq[i];
+
 	hpet = hpetp->hp_hpet;
 
-	/* Assign IRQs statically for legacy devices */
-	hpetp->hp_dev[0].hd_hdwirq = hdp->hd_irq[0];
-	hpetp->hp_dev[1].hd_hdwirq = hdp->hd_irq[1];
-
-	/* Assign IRQs dynamically for the others */
-	for (i = 2, devp = &hpetp->hp_dev[2]; i < hdp->hd_nirqs; i++, devp++) {
-		struct hpet_timer __iomem *timer;
-
-		timer = &hpet->hpet_timers[devp - hpetp->hp_dev];
-
-		/* Check if there's already an IRQ assigned to the timer */
-		if (hdp->hd_irq[i]) {
-			hpetp->hp_dev[i].hd_hdwirq = hdp->hd_irq[i];
-			continue;
-		}
-
-		hpet_config = readq(&timer->hpet_config);
-		irq_bitmap = (hpet_config & Tn_INT_ROUTE_CAP_MASK)
-			>> Tn_INT_ROUTE_CAP_SHIFT;
-		if (!irq_bitmap)
-			irq = 0;        /* No valid IRQ Assignable */
-		else {
-			irq = find_first_bit(&irq_bitmap, 32);
-			do {
-				hpet_config |= irq << Tn_INT_ROUTE_CNF_SHIFT;
-				writeq(hpet_config, &timer->hpet_config);
-
-				/*
-				 * Verify whether we have written a valid
-				 * IRQ number by reading it back again
-				 */
-				hpet_config = readq(&timer->hpet_config);
-				if (irq == (hpet_config & Tn_INT_ROUTE_CNF_MASK)
-						>> Tn_INT_ROUTE_CNF_SHIFT)
-					break;  /* Success */
-			} while ((irq = (find_next_bit(&irq_bitmap, 32, irq))));
-		}
-		hpetp->hp_dev[i].hd_hdwirq = irq;
-	}
-
 	cap = readq(&hpet->hpet_cap);
 
 	ntimer = ((cap & HPET_NUM_TIM_CAP_MASK) >> HPET_NUM_TIM_CAP_SHIFT) + 1;
@@ -836,8 +800,7 @@
 		hpetp->hp_which, hdp->hd_phys_address,
 		hpetp->hp_ntimer > 1 ? "s" : "");
 	for (i = 0; i < hpetp->hp_ntimer; i++)
-		printk("%s %d", i > 0 ? "," : "",
-				hpetp->hp_dev[i].hd_hdwirq);
+		printk("%s %d", i > 0 ? "," : "", hdp->hd_irq[i]);
 	printk("\n");
 
 	printk(KERN_INFO "hpet%u: %u %d-bit timers, %Lu Hz\n",
diff --git a/drivers/char/ip2/i2lib.c b/drivers/char/ip2/i2lib.c
index d6567b3..9c25320 100644
--- a/drivers/char/ip2/i2lib.c
+++ b/drivers/char/ip2/i2lib.c
@@ -644,12 +644,12 @@
 				// Normal Expected path - We still hold LOCK
 				break; /* from for()- Enough room: goto proceed */
 			}
-		}
+			ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize);
+			WRITE_UNLOCK_IRQRESTORE(lock_var_p, flags);
+		} else
+			ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize);
 
-		ip2trace (CHANN, ITRC_QUEUE, 3, 1, totalsize );
-
-		// Prepare to wait for buffers to empty
-		WRITE_UNLOCK_IRQRESTORE(lock_var_p,flags); 
+		/* Prepare to wait for buffers to empty */
 		serviceOutgoingFifo(pB);	// Dump what we got
 
 		if (timeout == 0) {
@@ -1830,6 +1830,8 @@
 		default: // Neither packet? should be impossible
 			ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 5, 1,
 				PTYPE_OF(pB->i2eLeadoffWord) );
+			WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,
+					bflags);
 
 			break;
 		}  // End of switch on type of packets
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index 46b2a1c..0c09409 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -1183,7 +1183,7 @@
 	return retval;
 }
 
-extern ssize_t redirected_tty_write(struct file *, const char *,
+extern ssize_t redirected_tty_write(struct file *, const char __user *,
 							size_t, loff_t *);
 
 /**
diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index 6d0dc5f..6a6843a 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -438,7 +438,7 @@
 			u32 size_bytes)
 {
 	u32 i = 0;
-	const u32 *ptr = (__force u32 *) mem_addr_start;
+	const u32 __iomem *ptr = mem_addr_start;
 	u16 *buf16;
 
 	if (unlikely(!ptr || !buf))
@@ -448,11 +448,11 @@
 	switch (size_bytes) {
 	case 2:	/* 2 bytes */
 		buf16 = (u16 *) buf;
-		*buf16 = __le16_to_cpu(readw((void __iomem *)ptr));
+		*buf16 = __le16_to_cpu(readw(ptr));
 		goto out;
 		break;
 	case 4:	/* 4 bytes */
-		*(buf) = __le32_to_cpu(readl((void __iomem *)ptr));
+		*(buf) = __le32_to_cpu(readl(ptr));
 		goto out;
 		break;
 	}
@@ -461,11 +461,11 @@
 		if (size_bytes - i == 2) {
 			/* Handle 2 bytes in the end */
 			buf16 = (u16 *) buf;
-			*(buf16) = __le16_to_cpu(readw((void __iomem *)ptr));
+			*(buf16) = __le16_to_cpu(readw(ptr));
 			i += 2;
 		} else {
 			/* Read 4 bytes */
-			*(buf) = __le32_to_cpu(readl((void __iomem *)ptr));
+			*(buf) = __le32_to_cpu(readl(ptr));
 			i += 4;
 		}
 		buf++;
@@ -484,7 +484,7 @@
 			u32 size_bytes)
 {
 	u32 i = 0;
-	u32 *ptr = (__force u32 *) mem_addr_start;
+	u32 __iomem *ptr = mem_addr_start;
 	const u16 *buf16;
 
 	if (unlikely(!ptr || !buf))
@@ -494,7 +494,7 @@
 	switch (size_bytes) {
 	case 2:	/* 2 bytes */
 		buf16 = (const u16 *)buf;
-		writew(__cpu_to_le16(*buf16), (void __iomem *)ptr);
+		writew(__cpu_to_le16(*buf16), ptr);
 		return 2;
 		break;
 	case 1: /*
@@ -502,7 +502,7 @@
 		 * so falling through..
 		 */
 	case 4: /* 4 bytes */
-		writel(__cpu_to_le32(*buf), (void __iomem *)ptr);
+		writel(__cpu_to_le32(*buf), ptr);
 		return 4;
 		break;
 	}
@@ -511,11 +511,11 @@
 		if (size_bytes - i == 2) {
 			/* 2 bytes */
 			buf16 = (const u16 *)buf;
-			writew(__cpu_to_le16(*buf16), (void __iomem *)ptr);
+			writew(__cpu_to_le16(*buf16), ptr);
 			i += 2;
 		} else {
 			/* 4 bytes */
-			writel(__cpu_to_le32(*buf), (void __iomem *)ptr);
+			writel(__cpu_to_le32(*buf), ptr);
 			i += 4;
 		}
 		buf++;
diff --git a/drivers/char/rio/riotable.c b/drivers/char/rio/riotable.c
index 991119c..9b52892 100644
--- a/drivers/char/rio/riotable.c
+++ b/drivers/char/rio/riotable.c
@@ -425,8 +425,10 @@
 
 		MapP = &p->RIOConnectTable[Next++];
 		MapP->HostUniqueNum = HostP->UniqueNum;
-		if ((HostP->Flags & RUN_STATE) != RC_RUNNING)
+		if ((HostP->Flags & RUN_STATE) != RC_RUNNING) {
+			rio_spin_unlock_irqrestore(&HostP->HostLock, flags);
 			continue;
+		}
 		MapP->RtaUniqueNum = 0;
 		MapP->ID = 0;
 		MapP->Flags = SLOT_IN_USE;
diff --git a/drivers/char/rio/riotty.c b/drivers/char/rio/riotty.c
index a4f0b1e..cfa5436 100644
--- a/drivers/char/rio/riotty.c
+++ b/drivers/char/rio/riotty.c
@@ -319,6 +319,7 @@
 			PortP->State |= RIO_WOPEN;
 			rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 			if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) {
+				rio_spin_lock_irqsave(&PortP->portSem, flags);
 				/*
 				 ** ACTION: verify that this is a good thing
 				 ** to do here. -- ???
@@ -334,6 +335,7 @@
 				func_exit();
 				return -EINTR;
 			}
+			rio_spin_lock_irqsave(&PortP->portSem, flags);
 		}
 		PortP->State &= ~RIO_WOPEN;
 	}
@@ -493,6 +495,7 @@
 
 	if (RIOShortCommand(p, PortP, CLOSE, 1, 0) == RIO_FAIL) {
 		RIOPreemptiveCmd(p, PortP, FCLOSE);
+		rio_spin_lock_irqsave(&PortP->portSem, flags);
 		goto close_end;
 	}
 
@@ -508,6 +511,7 @@
 
 			if (p->RIOHalted) {
 				RIOClearUp(PortP);
+				rio_spin_lock_irqsave(&PortP->portSem, flags);
 				goto close_end;
 			}
 			if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) {
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index d73663a..fc555a9 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -67,7 +67,7 @@
 	/* enter the state and update stats */
 	dev->last_residency = target_state->enter(dev, target_state);
 	dev->last_state = target_state;
-	target_state->time += dev->last_residency;
+	target_state->time += (unsigned long long)dev->last_residency;
 	target_state->usage++;
 
 	/* give the governor an opportunity to reflect on the outcome */
@@ -224,7 +224,7 @@
 	state->exit_latency = 0;
 	state->target_residency = 0;
 	state->power_usage = -1;
-	state->flags = CPUIDLE_FLAG_POLL | CPUIDLE_FLAG_TIME_VALID;
+	state->flags = CPUIDLE_FLAG_POLL;
 	state->enter = poll_idle;
 }
 #else
diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index 69102ca..e949618 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -218,6 +218,12 @@
 	return sprintf(buf, "%u\n", state->_name);\
 }
 
+#define define_show_state_ull_function(_name) \
+static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \
+{ \
+	return sprintf(buf, "%llu\n", state->_name);\
+}
+
 #define define_show_state_str_function(_name) \
 static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \
 { \
@@ -228,8 +234,8 @@
 
 define_show_state_function(exit_latency)
 define_show_state_function(power_usage)
-define_show_state_function(usage)
-define_show_state_function(time)
+define_show_state_ull_function(usage)
+define_show_state_ull_function(time)
 define_show_state_str_function(name)
 define_show_state_str_function(desc)
 
diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c
index 3110bf7..81f3f95 100644
--- a/drivers/crypto/hifn_795x.c
+++ b/drivers/crypto/hifn_795x.c
@@ -392,8 +392,8 @@
 
 struct hifn_desc
 {
-	volatile u32		l;
-	volatile u32		p;
+	volatile __le32		l;
+	volatile __le32		p;
 };
 
 struct hifn_dma {
@@ -481,10 +481,10 @@
 
 struct hifn_base_command
 {
-	volatile u16		masks;
-	volatile u16		session_num;
-	volatile u16		total_source_count;
-	volatile u16		total_dest_count;
+	volatile __le16		masks;
+	volatile __le16		session_num;
+	volatile __le16		total_source_count;
+	volatile __le16		total_dest_count;
 };
 
 #define	HIFN_BASE_CMD_COMP		0x0100	/* enable compression engine */
@@ -504,10 +504,10 @@
  */
 struct hifn_crypt_command
 {
-	volatile u16 		masks;
-	volatile u16 		header_skip;
-	volatile u16 		source_count;
-	volatile u16 		reserved;
+	volatile __le16 		masks;
+	volatile __le16 		header_skip;
+	volatile __le16 		source_count;
+	volatile __le16 		reserved;
 };
 
 #define	HIFN_CRYPT_CMD_ALG_MASK		0x0003		/* algorithm: */
@@ -670,7 +670,7 @@
 {
 	u32 ret;
 
-	ret = readl((char *)(dev->bar[0]) + reg);
+	ret = readl(dev->bar[0] + reg);
 
 	return ret;
 }
@@ -679,19 +679,19 @@
 {
 	u32 ret;
 
-	ret = readl((char *)(dev->bar[1]) + reg);
+	ret = readl(dev->bar[1] + reg);
 
 	return ret;
 }
 
 static inline void hifn_write_0(struct hifn_device *dev, u32 reg, u32 val)
 {
-	writel(val, (char *)(dev->bar[0]) + reg);
+	writel(val, dev->bar[0] + reg);
 }
 
 static inline void hifn_write_1(struct hifn_device *dev, u32 reg, u32 val)
 {
-	writel(val, (char *)(dev->bar[1]) + reg);
+	writel(val, dev->bar[1] + reg);
 }
 
 static void hifn_wait_puc(struct hifn_device *dev)
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index 7269230..df16368 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -1021,11 +1021,11 @@
 
 static struct of_device_id of_fsl_dma_chan_ids[] = {
 	{
-		.compatible = "fsl,mpc8540-dma-channel",
+		.compatible = "fsl,eloplus-dma-channel",
 		.data = (void *)&mpc8540_dma_ip_feature,
 	},
 	{
-		.compatible = "fsl,mpc8349-dma-channel",
+		.compatible = "fsl,elo-dma-channel",
 		.data = (void *)&mpc8349_dma_ip_feature,
 	},
 	{}
@@ -1107,8 +1107,8 @@
 }
 
 static struct of_device_id of_fsl_dma_ids[] = {
-	{ .compatible = "fsl,mpc8540-dma", },
-	{ .compatible = "fsl,mpc8349-dma", },
+	{ .compatible = "fsl,eloplus-dma", },
+	{ .compatible = "fsl,elo-dma", },
 	{}
 };
 
diff --git a/drivers/dma/fsldma.h b/drivers/dma/fsldma.h
index fddd6ae..6faf07b 100644
--- a/drivers/dma/fsldma.h
+++ b/drivers/dma/fsldma.h
@@ -75,12 +75,15 @@
 #define FSL_DMA_DGSR_EOSI	0x02
 #define FSL_DMA_DGSR_EOLSI	0x01
 
+typedef u64 __bitwise v64;
+typedef u32 __bitwise v32;
+
 struct fsl_dma_ld_hw {
-	u64 __bitwise	src_addr;
-	u64 __bitwise	dst_addr;
-	u64 __bitwise	next_ln_addr;
-	u32 __bitwise	count;
-	u32 __bitwise	reserve;
+	v64 src_addr;
+	v64 dst_addr;
+	v64 next_ln_addr;
+	v32 count;
+	v32 reserve;
 } __attribute__((aligned(32)));
 
 struct fsl_desc_sw {
@@ -92,13 +95,13 @@
 } __attribute__((aligned(32)));
 
 struct fsl_dma_chan_regs {
-	u32 __bitwise	mr;	/* 0x00 - Mode Register */
-	u32 __bitwise	sr;	/* 0x04 - Status Register */
-	u64 __bitwise	cdar;	/* 0x08 - Current descriptor address register */
-	u64 __bitwise	sar;	/* 0x10 - Source Address Register */
-	u64 __bitwise	dar;	/* 0x18 - Destination Address Register */
-	u32 __bitwise	bcr;	/* 0x20 - Byte Count Register */
-	u64 __bitwise	ndar;	/* 0x24 - Next Descriptor Address Register */
+	u32 mr;	/* 0x00 - Mode Register */
+	u32 sr;	/* 0x04 - Status Register */
+	u64 cdar;	/* 0x08 - Current descriptor address register */
+	u64 sar;	/* 0x10 - Source Address Register */
+	u64 dar;	/* 0x18 - Destination Address Register */
+	u32 bcr;	/* 0x20 - Byte Count Register */
+	u64 ndar;	/* 0x24 - Next Descriptor Address Register */
 };
 
 struct fsl_dma_chan;
@@ -151,25 +154,27 @@
 #ifndef __powerpc64__
 static u64 in_be64(const u64 __iomem *addr)
 {
-	return ((u64)in_be32((u32 *)addr) << 32) | (in_be32((u32 *)addr + 1));
+	return ((u64)in_be32((u32 __iomem *)addr) << 32) |
+		(in_be32((u32 __iomem *)addr + 1));
 }
 
 static void out_be64(u64 __iomem *addr, u64 val)
 {
-	out_be32((u32 *)addr, val >> 32);
-	out_be32((u32 *)addr + 1, (u32)val);
+	out_be32((u32 __iomem *)addr, val >> 32);
+	out_be32((u32 __iomem *)addr + 1, (u32)val);
 }
 
 /* There is no asm instructions for 64 bits reverse loads and stores */
 static u64 in_le64(const u64 __iomem *addr)
 {
-	return ((u64)in_le32((u32 *)addr + 1) << 32) | (in_le32((u32 *)addr));
+	return ((u64)in_le32((u32 __iomem *)addr + 1) << 32) |
+		(in_le32((u32 __iomem *)addr));
 }
 
 static void out_le64(u64 __iomem *addr, u64 val)
 {
-	out_le32((u32 *)addr + 1, val >> 32);
-	out_le32((u32 *)addr, (u32)val);
+	out_le32((u32 __iomem *)addr + 1, val >> 32);
+	out_le32((u32 __iomem *)addr, (u32)val);
 }
 #endif
 
@@ -182,9 +187,11 @@
 
 #define DMA_TO_CPU(fsl_chan, d, width)					\
 		(((fsl_chan)->feature & FSL_DMA_BIG_ENDIAN) ?		\
-			be##width##_to_cpu(d) :	le##width##_to_cpu(d))
+			be##width##_to_cpu((__force __be##width)(v##width)d) : \
+			le##width##_to_cpu((__force __le##width)(v##width)d))
 #define CPU_TO_DMA(fsl_chan, c, width)					\
 		(((fsl_chan)->feature & FSL_DMA_BIG_ENDIAN) ?		\
-			cpu_to_be##width(c) : cpu_to_le##width(c))
+			(__force v##width)cpu_to_be##width(c) :		\
+			(__force v##width)cpu_to_le##width(c))
 
 #endif	/* __DMA_FSLDMA_H */
diff --git a/drivers/dma/ioat_dca.c b/drivers/dma/ioat_dca.c
index 0fa8a98..9e92276 100644
--- a/drivers/dma/ioat_dca.c
+++ b/drivers/dma/ioat_dca.c
@@ -98,7 +98,7 @@
 
 struct ioat_dca_priv {
 	void __iomem		*iobase;
-	void			*dca_base;
+	void __iomem		*dca_base;
 	int			 max_requesters;
 	int			 requester_count;
 	u8			 tag_map[IOAT_TAG_MAP_LEN];
@@ -338,7 +338,7 @@
 	.get_tag		= ioat2_dca_get_tag,
 };
 
-static int ioat2_dca_count_dca_slots(void *iobase, u16 dca_offset)
+static int ioat2_dca_count_dca_slots(void __iomem *iobase, u16 dca_offset)
 {
 	int slots = 0;
 	u32 req;
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index 996d61f..ca6d51e 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -401,7 +401,8 @@
 
 	if (d->res_count == 0) {
 		size_t size, rest, offset;
-		dma_addr_t buffer_bus;
+		dma_addr_t start_bus;
+		void *start;
 
 		/*
 		 * This descriptor is finished and we may have a
@@ -410,9 +411,9 @@
 		 */
 
 		offset = offsetof(struct ar_buffer, data);
-		buffer_bus = le32_to_cpu(ab->descriptor.data_address) - offset;
+		start = buffer = ab;
+		start_bus = le32_to_cpu(ab->descriptor.data_address) - offset;
 
-		buffer = ab;
 		ab = ab->next;
 		d = &ab->descriptor;
 		size = buffer + PAGE_SIZE - ctx->pointer;
@@ -427,7 +428,7 @@
 			buffer = handle_ar_packet(ctx, buffer);
 
 		dma_free_coherent(ohci->card.device, PAGE_SIZE,
-				  buffer, buffer_bus);
+				  start, start_bus);
 		ar_context_add_page(ctx);
 	} else {
 		buffer = ctx->pointer;
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index 4072449..c5e3ed7 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -266,7 +266,7 @@
 	dev->name = "IPMI controller";
 	dev->device_data = data;
 
-	list_add(&dev->list, &dmi_devices);
+	list_add_tail(&dev->list, &dmi_devices);
 }
 
 static void __init dmi_save_extended_devices(const struct dmi_header *dm)
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index 5c85670..f942ecd 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1367,7 +1367,8 @@
 
 	/* Reserve the ISA region */
 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
-	if (!request_region(res->start, W83781D_EXTENT, "w83781d")) {
+	if (!request_region(res->start + W83781D_ADDR_REG_OFFSET, 2,
+			    "w83781d")) {
 		err = -EBUSY;
 		goto exit;
 	}
@@ -1415,7 +1416,7 @@
 	device_remove_file(&pdev->dev, &dev_attr_name);
 	kfree(data);
  exit_release_region:
-	release_region(res->start, W83781D_EXTENT);
+	release_region(res->start + W83781D_ADDR_REG_OFFSET, 2);
  exit:
 	return err;
 }
@@ -1429,7 +1430,7 @@
 	sysfs_remove_group(&pdev->dev.kobj, &w83781d_group);
 	sysfs_remove_group(&pdev->dev.kobj, &w83781d_group_opt);
 	device_remove_file(&pdev->dev, &dev_attr_name);
-	release_region(data->client.addr, W83781D_EXTENT);
+	release_region(data->client.addr + W83781D_ADDR_REG_OFFSET, 2);
 	kfree(data);
 
 	return 0;
@@ -1797,8 +1798,17 @@
 {
 	int val, save, found = 0;
 
-	if (!request_region(address, W83781D_EXTENT, "w83781d"))
+	/* We have to request the region in two parts because some
+	   boards declare base+4 to base+7 as a PNP device */
+	if (!request_region(address, 4, "w83781d")) {
+		pr_debug("w83781d: Failed to request low part of region\n");
 		return 0;
+	}
+	if (!request_region(address + 4, 4, "w83781d")) {
+		pr_debug("w83781d: Failed to request high part of region\n");
+		release_region(address, 4);
+		return 0;
+	}
 
 #define REALLY_SLOW_IO
 	/* We need the timeouts for at least some W83781D-like
@@ -1871,7 +1881,8 @@
 			val == 0x30 ? "W83782D" : "W83781D", (int)address);
 
  release:
-	release_region(address, W83781D_EXTENT);
+	release_region(address + 4, 4);
+	release_region(address, 4);
 	return found;
 }
 
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index cce5a61..fde2634 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -382,9 +382,8 @@
 			break;
 
 		case DAVINCI_I2C_IVR_ARDY:
-			w = davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG);
-			MOD_REG_BIT(w, DAVINCI_I2C_STR_ARDY, 1);
-			davinci_i2c_write_reg(dev, DAVINCI_I2C_STR_REG, w);
+			davinci_i2c_write_reg(dev,
+				DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_ARDY);
 			complete(&dev->cmd_complete);
 			break;
 
@@ -397,12 +396,9 @@
 				if (dev->buf_len)
 					continue;
 
-				w = davinci_i2c_read_reg(dev,
-							 DAVINCI_I2C_STR_REG);
-				MOD_REG_BIT(w, DAVINCI_I2C_IMR_RRDY, 0);
 				davinci_i2c_write_reg(dev,
-						      DAVINCI_I2C_STR_REG,
-						      w);
+					DAVINCI_I2C_STR_REG,
+					DAVINCI_I2C_IMR_RRDY);
 			} else
 				dev_err(dev->dev, "RDR IRQ while no "
 					"data requested\n");
@@ -428,9 +424,8 @@
 			break;
 
 		case DAVINCI_I2C_IVR_SCD:
-			w = davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG);
-			MOD_REG_BIT(w, DAVINCI_I2C_STR_SCD, 1);
-			davinci_i2c_write_reg(dev, DAVINCI_I2C_STR_REG, w);
+			davinci_i2c_write_reg(dev,
+				DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_SCD);
 			complete(&dev->cmd_complete);
 			break;
 
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 7c7eb0c..22bb247 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -55,7 +55,7 @@
 
 static int iic_force_fast;
 module_param(iic_force_fast, bool, 0);
-MODULE_PARM_DESC(iic_fast_poll, "Force fast mode (400 kHz)");
+MODULE_PARM_DESC(iic_force_fast, "Force fast mode (400 kHz)");
 
 #define DBG_LEVEL 0
 
diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c
index cb9abe75..b1c050f 100644
--- a/drivers/i2c/busses/i2c-tiny-usb.c
+++ b/drivers/i2c/busses/i2c-tiny-usb.c
@@ -131,11 +131,15 @@
 
 /* ----- begin of usb layer ---------------------------------------------- */
 
-/* The usb i2c interface uses a vid/pid pair donated by */
-/* Future Technology Devices International Ltd. */
+/*
+ * Initially the usb i2c interface uses a vid/pid pair donated by
+ * Future Technology Devices International Ltd., later a pair was
+ * bought from EZPrototypes
+ */
 static struct usb_device_id i2c_tiny_usb_table [] = {
-	{ USB_DEVICE(0x0403, 0xc631) },
-	{ }			/* Terminating entry */
+	{ USB_DEVICE(0x0403, 0xc631) },   /* FTDI */
+	{ USB_DEVICE(0x1c40, 0x0534) },   /* EZPrototypes */
+	{ }                               /* Terminating entry */
 };
 
 MODULE_DEVICE_TABLE(usb, i2c_tiny_usb_table);
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index b21593f..2da2edf 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -93,6 +93,7 @@
 
 config TPS65010
 	tristate "TPS6501x Power Management chips"
+	depends on HAVE_GPIO_LIB
 	default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
 	help
 	  If you say yes here you get support for the TPS6501x series of
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index 4154a91..b67f69c 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -30,9 +30,13 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/mutex.h>
+#include <linux/platform_device.h>
 
 #include <linux/i2c/tps65010.h>
 
+#include <asm/gpio.h>
+
+
 /*-------------------------------------------------------------------------*/
 
 #define	DRIVER_VERSION	"2 May 2005"
@@ -84,7 +88,9 @@
 	u8			chgstatus, regstatus, chgconf;
 	u8			nmask1, nmask2;
 
-	/* not currently tracking GPIO state */
+	u8			outmask;
+	struct gpio_chip	chip;
+	struct platform_device	*leds;
 };
 
 #define	POWER_POLL_DELAY	msecs_to_jiffies(5000)
@@ -449,12 +455,72 @@
 
 /*-------------------------------------------------------------------------*/
 
+/* offsets 0..3 == GPIO1..GPIO4
+ * offsets 4..5 == LED1/nPG, LED2 (we set one of the non-BLINK modes)
+ */
+static void
+tps65010_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	if (offset < 4)
+		tps65010_set_gpio_out_value(offset + 1, value);
+	else
+		tps65010_set_led(offset - 3, value ? ON : OFF);
+}
+
+static int
+tps65010_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+	/* GPIOs may be input-only */
+	if (offset < 4) {
+		struct tps65010		*tps;
+
+		tps = container_of(chip, struct tps65010, chip);
+		if (!(tps->outmask & (1 << offset)))
+			return -EINVAL;
+		tps65010_set_gpio_out_value(offset + 1, value);
+	} else
+		tps65010_set_led(offset - 3, value ? ON : OFF);
+
+	return 0;
+}
+
+static int tps65010_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	int			value;
+	struct tps65010		*tps;
+
+	tps = container_of(chip, struct tps65010, chip);
+
+	if (offset < 4) {
+		value = i2c_smbus_read_byte_data(tps->client, TPS_DEFGPIO);
+		if (value < 0)
+			return 0;
+		if (value & (1 << (offset + 4)))	/* output */
+			return !(value & (1 << offset));
+		else					/* input */
+			return (value & (1 << offset));
+	}
+
+	/* REVISIT we *could* report LED1/nPG and LED2 state ... */
+	return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
 static struct tps65010 *the_tps;
 
 static int __exit tps65010_remove(struct i2c_client *client)
 {
 	struct tps65010		*tps = i2c_get_clientdata(client);
+	struct tps65010_board	*board = client->dev.platform_data;
 
+	if (board && board->teardown) {
+		int status = board->teardown(client, board->context);
+		if (status < 0)
+			dev_dbg(&client->dev, "board %s %s err %d\n",
+				"teardown", client->name, status);
+	}
 	if (client->irq > 0)
 		free_irq(client->irq, tps);
 	cancel_delayed_work(&tps->work);
@@ -469,6 +535,7 @@
 {
 	struct tps65010		*tps;
 	int			status;
+	struct tps65010_board	*board = client->dev.platform_data;
 
 	if (the_tps) {
 		dev_dbg(&client->dev, "only one tps6501x chip allowed\n");
@@ -577,6 +644,38 @@
 
 	tps->file = debugfs_create_file(DRIVER_NAME, S_IRUGO, NULL,
 				tps, DEBUG_FOPS);
+
+	/* optionally register GPIOs */
+	if (board && board->base > 0) {
+		tps->outmask = board->outmask;
+
+		tps->chip.label = client->name;
+
+		tps->chip.set = tps65010_gpio_set;
+		tps->chip.direction_output = tps65010_output;
+
+		/* NOTE:  only partial support for inputs; nyet IRQs */
+		tps->chip.get = tps65010_gpio_get;
+
+		tps->chip.base = board->base;
+		tps->chip.ngpio = 6;
+		tps->chip.can_sleep = 1;
+
+		status = gpiochip_add(&tps->chip);
+		if (status < 0)
+			dev_err(&client->dev, "can't add gpiochip, err %d\n",
+					status);
+		else if (board->setup) {
+			status = board->setup(client, board->context);
+			if (status < 0) {
+				dev_dbg(&client->dev,
+					"board %s %s err %d\n",
+					"setup", client->name, status);
+				status = 0;
+			}
+		}
+	}
+
 	return 0;
 fail1:
 	kfree(tps);
diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c
index 43a70e9..be9ff73 100644
--- a/drivers/ide/arm/ide_arm.c
+++ b/drivers/ide/arm/ide_arm.c
@@ -46,3 +46,5 @@
 }
 
 module_init(ide_arm_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index e79bf8f..c8ffbaf 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -1067,3 +1067,5 @@
 }
 
 module_init(init_e100_ide);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c
index 520aec0..4108ec4 100644
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -110,6 +110,7 @@
 	ide_init_port_data(hwif, index);
 	ide_init_port_hw(hwif, &hw);
 	hwif_setup(hwif);
+	hwif->host_flags = IDE_HFLAG_NO_IO_32BIT;
 	printk(KERN_INFO "ide%d: H8/300 generic IDE interface\n", index);
 
 	idx[0] = index;
@@ -125,3 +126,5 @@
 }
 
 module_init(h8300_ide_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index c419266..e77cee0 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -595,6 +595,7 @@
 
 	/*
 	 * FIXME:
+	 * - change master/slave IDENTIFY order
 	 * - force bit13 (80c cable present) check also for !ivb devices
 	 *   (unless the slave device is pre-ATA3)
 	 */
@@ -657,7 +658,7 @@
 		local_irq_restore(flags);
 		return 0;
 	}
-	ata_input_data(drive, id, SECTOR_WORDS);
+	hwif->ata_input_data(drive, id, SECTOR_WORDS);
 	(void)ide_read_status(drive);	/* clear drive IRQ */
 	local_irq_enable();
 	local_irq_restore(flags);
diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c
index b163b2e..c14bb53 100644
--- a/drivers/ide/ide-pnp.c
+++ b/drivers/ide/ide-pnp.c
@@ -86,3 +86,5 @@
 
 module_init(pnpide_init);
 module_exit(pnpide_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 194ecb0..47a1149 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -774,9 +774,10 @@
 		printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name);
 
 	/*
-	 * Need to probe slave device first to make it release PDIAG-.
+	 * Second drive should only exist if first drive was found,
+	 * but a lot of cdrom drives are configured as single slaves.
 	 */
-	for (unit = MAX_DRIVES - 1; unit >= 0; unit--) {
+	for (unit = 0; unit < MAX_DRIVES; ++unit) {
 		ide_drive_t *drive = &hwif->drives[unit];
 		drive->dn = (hwif->channel ? 2 : 0) + unit;
 		(void) probe_for_drive(drive);
diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c
index 50ffa87..fdd3791 100644
--- a/drivers/ide/legacy/buddha.c
+++ b/drivers/ide/legacy/buddha.c
@@ -241,3 +241,5 @@
 }
 
 module_init(buddha_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c
index 8949ce7..e950afa 100644
--- a/drivers/ide/legacy/falconide.c
+++ b/drivers/ide/legacy/falconide.c
@@ -93,3 +93,5 @@
 }
 
 module_init(falconide_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c
index b7d81090..e3b4638 100644
--- a/drivers/ide/legacy/gayle.c
+++ b/drivers/ide/legacy/gayle.c
@@ -195,3 +195,5 @@
 }
 
 module_init(gayle_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c
index 9a79098..eaf5dbe 100644
--- a/drivers/ide/legacy/macide.c
+++ b/drivers/ide/legacy/macide.c
@@ -137,3 +137,5 @@
 }
 
 module_init(macide_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c
index 1381b91..2da2875 100644
--- a/drivers/ide/legacy/q40ide.c
+++ b/drivers/ide/legacy/q40ide.c
@@ -153,3 +153,5 @@
 }
 
 module_init(q40ide_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index ec66798..29fbc5e 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -881,3 +881,5 @@
 MODULE_PARM_DESC(probe_vlb, "probe for VLB version of CMD640 chipset");
 
 module_init(cmd640x_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index cc4be96..8d624af 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -492,7 +492,7 @@
  
 static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name)
 {
-	unsigned long bar5	= pci_resource_start(dev, 5);
+	resource_size_t bar5	= pci_resource_start(dev, 5);
 	unsigned long barsize	= pci_resource_len(dev, 5);
 	u8 tmpbyte	= 0;
 	void __iomem *ioaddr;
diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c
index 38fbfb8..ebaba01 100644
--- a/drivers/ide/ppc/mpc8xx.c
+++ b/drivers/ide/ppc/mpc8xx.c
@@ -853,3 +853,5 @@
 }
 
 module_init(mpc8xx_ide_probe);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 78c9eeb..d9ca52e 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1771,3 +1771,5 @@
 #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
 
 module_init(pmac_ide_probe);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c
index a58ad8a..781ea59 100644
--- a/drivers/infiniband/core/addr.c
+++ b/drivers/infiniband/core/addr.c
@@ -154,7 +154,7 @@
 {
 	struct rtable *rt;
 	struct flowi fl;
-	u32 dst_ip = dst_in->sin_addr.s_addr;
+	__be32 dst_ip = dst_in->sin_addr.s_addr;
 
 	memset(&fl, 0, sizeof fl);
 	fl.nl_u.ip4_u.daddr = dst_ip;
@@ -169,8 +169,8 @@
 			       struct sockaddr_in *dst_in,
 			       struct rdma_dev_addr *addr)
 {
-	u32 src_ip = src_in->sin_addr.s_addr;
-	u32 dst_ip = dst_in->sin_addr.s_addr;
+	__be32 src_ip = src_in->sin_addr.s_addr;
+	__be32 dst_ip = dst_in->sin_addr.s_addr;
 	struct flowi fl;
 	struct rtable *rt;
 	struct neighbour *neigh;
@@ -257,7 +257,7 @@
 			      struct rdma_dev_addr *addr)
 {
 	struct net_device *dev;
-	u32 src_ip = src_in->sin_addr.s_addr;
+	__be32 src_ip = src_in->sin_addr.s_addr;
 	__be32 dst_ip = dst_in->sin_addr.s_addr;
 	int ret;
 
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 4df4051..faa7ce3 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -393,7 +393,7 @@
 		spin_unlock_irqrestore(&cm.lock, flags);
 	} while( (ret == -EAGAIN) && idr_pre_get(&cm.local_id_table, GFP_KERNEL) );
 
-	cm_id_priv->id.local_id = (__force __be32) (id ^ cm.random_id_operand);
+	cm_id_priv->id.local_id = (__force __be32)id ^ cm.random_id_operand;
 	return ret;
 }
 
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 34507da..d81c156 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -168,15 +168,15 @@
 union cma_ip_addr {
 	struct in6_addr ip6;
 	struct {
-		__u32 pad[3];
-		__u32 addr;
+		__be32 pad[3];
+		__be32 addr;
 	} ip4;
 };
 
 struct cma_hdr {
 	u8 cma_version;
 	u8 ip_version;	/* IP version: 7:4 */
-	__u16 port;
+	__be16 port;
 	union cma_ip_addr src_addr;
 	union cma_ip_addr dst_addr;
 };
@@ -186,8 +186,8 @@
 	u8 sdp_version; /* Major version: 7:4 */
 	u8 ip_version;	/* IP version: 7:4 */
 	u8 sdp_specific1[10];
-	__u16 port;
-	__u16 sdp_specific2;
+	__be16 port;
+	__be16 sdp_specific2;
 	union cma_ip_addr src_addr;
 	union cma_ip_addr dst_addr;
 };
@@ -663,7 +663,7 @@
 }
 
 static int cma_get_net_info(void *hdr, enum rdma_port_space ps,
-			    u8 *ip_ver, __u16 *port,
+			    u8 *ip_ver, __be16 *port,
 			    union cma_ip_addr **src, union cma_ip_addr **dst)
 {
 	switch (ps) {
@@ -695,7 +695,7 @@
 
 static void cma_save_net_info(struct rdma_addr *addr,
 			      struct rdma_addr *listen_addr,
-			      u8 ip_ver, __u16 port,
+			      u8 ip_ver, __be16 port,
 			      union cma_ip_addr *src, union cma_ip_addr *dst)
 {
 	struct sockaddr_in *listen4, *ip4;
@@ -996,7 +996,7 @@
 	struct rdma_cm_id *id;
 	struct rdma_route *rt;
 	union cma_ip_addr *src, *dst;
-	__u16 port;
+	__be16 port;
 	u8 ip_ver;
 
 	if (cma_get_net_info(ib_event->private_data, listen_id->ps,
@@ -1043,7 +1043,7 @@
 	struct rdma_id_private *id_priv;
 	struct rdma_cm_id *id;
 	union cma_ip_addr *src, *dst;
-	__u16 port;
+	__be16 port;
 	u8 ip_ver;
 	int ret;
 
@@ -1165,7 +1165,7 @@
 {
 	struct cma_hdr *cma_data, *cma_mask;
 	struct sdp_hh *sdp_data, *sdp_mask;
-	__u32 ip4_addr;
+	__be32 ip4_addr;
 	struct in6_addr ip6_addr;
 
 	memset(compare, 0, sizeof *compare);
@@ -1181,12 +1181,12 @@
 			sdp_set_ip_ver(sdp_data, 4);
 			sdp_set_ip_ver(sdp_mask, 0xF);
 			sdp_data->dst_addr.ip4.addr = ip4_addr;
-			sdp_mask->dst_addr.ip4.addr = ~0;
+			sdp_mask->dst_addr.ip4.addr = htonl(~0);
 		} else {
 			cma_set_ip_ver(cma_data, 4);
 			cma_set_ip_ver(cma_mask, 0xF);
 			cma_data->dst_addr.ip4.addr = ip4_addr;
-			cma_mask->dst_addr.ip4.addr = ~0;
+			cma_mask->dst_addr.ip4.addr = htonl(~0);
 		}
 		break;
 	case AF_INET6:
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c
index 320f2b6..99f2f2a 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c
@@ -1745,7 +1745,7 @@
 
 	/* bind QP to EP and move to RTS */
 	attrs.mpa_attr = ep->mpa_attr;
-	attrs.max_ird = ep->ord;
+	attrs.max_ird = ep->ird;
 	attrs.max_ord = ep->ord;
 	attrs.llp_stream_handle = ep;
 	attrs.next_state = IWCH_QP_STATE_RTS;
diff --git a/drivers/input/apm-power.c b/drivers/input/apm-power.c
index c36d110b..7d61a96 100644
--- a/drivers/input/apm-power.c
+++ b/drivers/input/apm-power.c
@@ -63,8 +63,6 @@
 	handle->handler = handler;
 	handle->name = "apm-power";
 
-	handler->private = handle;
-
 	error = input_register_handle(handle);
 	if (error) {
 		printk(KERN_ERR
@@ -87,11 +85,10 @@
 	return 0;
 }
 
-static void apmpower_disconnect(struct input_handle *handler)
+static void apmpower_disconnect(struct input_handle *handle)
 {
-	struct input_handle *handle = handler->private;
-
 	input_close_device(handle);
+	input_unregister_handle(handle);
 	kfree(handle);
 }
 
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 0727b0a..b32984b 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -124,6 +124,7 @@
 {
 	struct evdev *evdev = container_of(dev, struct evdev, dev);
 
+	input_put_device(evdev->handle.dev);
 	kfree(evdev);
 }
 
@@ -893,7 +894,7 @@
 	evdev->exist = 1;
 	evdev->minor = minor;
 
-	evdev->handle.dev = dev;
+	evdev->handle.dev = input_get_device(dev);
 	evdev->handle.name = evdev->name;
 	evdev->handle.handler = handler;
 	evdev->handle.private = evdev;
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 22b2789..65d7077 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -171,6 +171,7 @@
 {
 	struct joydev *joydev = container_of(dev, struct joydev, dev);
 
+	input_put_device(joydev->handle.dev);
 	kfree(joydev);
 }
 
@@ -750,7 +751,7 @@
 	joydev->minor = minor;
 
 	joydev->exist = 1;
-	joydev->handle.dev = dev;
+	joydev->handle.dev = input_get_device(dev);
 	joydev->handle.name = joydev->name;
 	joydev->handle.handler = handler;
 	joydev->handle.private = joydev;
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 6224c2f..4e651c1 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -50,9 +50,9 @@
 #define KPKDI           0x0048
 
 /* bit definitions */
-#define KPC_MKRN(n)	((((n) & 0x7) - 1) << 26) /* matrix key row number */
-#define KPC_MKCN(n)	((((n) & 0x7) - 1) << 23) /* matrix key column number */
-#define KPC_DKN(n)	((((n) & 0x7) - 1) << 6)  /* direct key number */
+#define KPC_MKRN(n)	((((n) - 1) & 0x7) << 26) /* matrix key row number */
+#define KPC_MKCN(n)	((((n) - 1) & 0x7) << 23) /* matrix key column number */
+#define KPC_DKN(n)	((((n) - 1) & 0x7) << 6)  /* direct key number */
 
 #define KPC_AS          (0x1 << 30)  /* Automatic Scan bit */
 #define KPC_ASACT       (0x1 << 29)  /* Automatic Scan on Activity */
diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c
index d2ade74..798d84c 100644
--- a/drivers/input/misc/ixp4xx-beeper.c
+++ b/drivers/input/misc/ixp4xx-beeper.c
@@ -25,6 +25,7 @@
 MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
 MODULE_DESCRIPTION("ixp4xx beeper driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ixp4xx-beeper");
 
 static DEFINE_SPINLOCK(beep_lock);
 
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index b4423a4..8dd3942 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -62,6 +62,10 @@
 #define GEYSER4_ISO_PRODUCT_ID	0x021B
 #define GEYSER4_JIS_PRODUCT_ID	0x021C
 
+#define GEYSER4_HF_ANSI_PRODUCT_ID	0x0229
+#define GEYSER4_HF_ISO_PRODUCT_ID	0x022A
+#define GEYSER4_HF_JIS_PRODUCT_ID	0x022B
+
 #define ATP_DEVICE(prod)					\
 	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |		\
 		       USB_DEVICE_ID_MATCH_INT_CLASS |		\
@@ -93,6 +97,10 @@
 	{ ATP_DEVICE(GEYSER4_ISO_PRODUCT_ID) },
 	{ ATP_DEVICE(GEYSER4_JIS_PRODUCT_ID) },
 
+	{ ATP_DEVICE(GEYSER4_HF_ANSI_PRODUCT_ID) },
+	{ ATP_DEVICE(GEYSER4_HF_ISO_PRODUCT_ID) },
+	{ ATP_DEVICE(GEYSER4_HF_JIS_PRODUCT_ID) },
+
 	/* Terminating entry */
 	{ }
 };
@@ -217,7 +225,10 @@
 		(productId == GEYSER3_JIS_PRODUCT_ID) ||
 		(productId == GEYSER4_ANSI_PRODUCT_ID) ||
 		(productId == GEYSER4_ISO_PRODUCT_ID) ||
-		(productId == GEYSER4_JIS_PRODUCT_ID);
+		(productId == GEYSER4_JIS_PRODUCT_ID) ||
+		(productId == GEYSER4_HF_ANSI_PRODUCT_ID) ||
+		(productId == GEYSER4_HF_ISO_PRODUCT_ID) ||
+		(productId == GEYSER4_HF_JIS_PRODUCT_ID);
 }
 
 /*
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index bbbe5e8..b989748 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -414,6 +414,7 @@
 {
 	struct mousedev *mousedev = container_of(dev, struct mousedev, dev);
 
+	input_put_device(mousedev->handle.dev);
 	kfree(mousedev);
 }
 
@@ -865,7 +866,7 @@
 
 	mousedev->minor = minor;
 	mousedev->exist = 1;
-	mousedev->handle.dev = dev;
+	mousedev->handle.dev = input_get_device(dev);
 	mousedev->handle.name = mousedev->name;
 	mousedev->handle.handler = handler;
 	mousedev->handle.private = mousedev;
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 57a1c28..39573b9 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -28,13 +28,6 @@
 #include <linux/spi/ads7846.h>
 #include <asm/irq.h>
 
-#ifdef	CONFIG_ARM
-#include <asm/mach-types.h>
-#ifdef	CONFIG_ARCH_OMAP
-#include <asm/arch/gpio.h>
-#endif
-#endif
-
 
 /*
  * This code has been heavily tested on a Nokia 770, and lightly
@@ -1174,31 +1167,6 @@
 
 static int __init ads7846_init(void)
 {
-	/* grr, board-specific init should stay out of drivers!! */
-
-#ifdef	CONFIG_ARCH_OMAP
-	if (machine_is_omap_osk()) {
-		/* GPIO4 = PENIRQ; GPIO6 = BUSY */
-		omap_request_gpio(4);
-		omap_set_gpio_direction(4, 1);
-		omap_request_gpio(6);
-		omap_set_gpio_direction(6, 1);
-	}
-	// also TI 1510 Innovator, bitbanging through FPGA
-	// also Nokia 770
-	// also Palm Tungsten T2
-#endif
-
-	// PXA:
-	// also Dell Axim X50
-	// also HP iPaq H191x/H192x/H415x/H435x
-	// also Intel Lubbock (additional to UCB1400; as temperature sensor)
-	// also Sharp Zaurus C7xx, C8xx (corgi/sheperd/husky)
-
-	// Atmel at91sam9261-EK uses ads7843
-
-	// also various AMD Au1x00 devel boards
-
 	return spi_register_driver(&ads7846_driver);
 }
 module_init(ads7846_init);
@@ -1206,14 +1174,6 @@
 static void __exit ads7846_exit(void)
 {
 	spi_unregister_driver(&ads7846_driver);
-
-#ifdef	CONFIG_ARCH_OMAP
-	if (machine_is_omap_osk()) {
-		omap_free_gpio(4);
-		omap_free_gpio(6);
-	}
-#endif
-
 }
 module_exit(ads7846_exit);
 
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index 6c0a9c4..4c0b058 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -49,13 +49,13 @@
 	if (led_dat->active_low)
 		level = !level;
 
-	/* setting GPIOs with I2C/etc requires a preemptible task context */
+	/* Setting GPIOs with I2C/etc requires a task context, and we don't
+	 * seem to have a reliable way to know if we're already in one; so
+	 * let's just assume the worst.
+	 */
 	if (led_dat->can_sleep) {
-		if (preempt_count()) {
-			led_dat->new_level = level;
-			schedule_work(&led_dat->work);
-		} else
-			gpio_set_value_cansleep(led_dat->gpio, level);
+		led_dat->new_level = level;
+		schedule_work(&led_dat->work);
 	} else
 		gpio_set_value(led_dat->gpio, level);
 }
@@ -79,6 +79,10 @@
 		cur_led = &pdata->leds[i];
 		led_dat = &leds_data[i];
 
+		ret = gpio_request(cur_led->gpio, cur_led->name);
+		if (ret < 0)
+			goto err;
+
 		led_dat->cdev.name = cur_led->name;
 		led_dat->cdev.default_trigger = cur_led->default_trigger;
 		led_dat->gpio = cur_led->gpio;
@@ -87,10 +91,6 @@
 		led_dat->cdev.brightness_set = gpio_led_set;
 		led_dat->cdev.brightness = LED_OFF;
 
-		ret = gpio_request(led_dat->gpio, led_dat->cdev.name);
-		if (ret < 0)
-			goto err;
-
 		gpio_direction_output(led_dat->gpio, led_dat->active_low);
 
 		INIT_WORK(&led_dat->work, gpio_led_work);
diff --git a/drivers/lguest/Makefile b/drivers/lguest/Makefile
index 5e8272d2..7d463c2 100644
--- a/drivers/lguest/Makefile
+++ b/drivers/lguest/Makefile
@@ -19,3 +19,11 @@
 	@for f in Preparation Guest Drivers Launcher Host Switcher Mastery; do echo "{==- $$f -==}"; make -s $$f; done; echo "{==-==}"
 Preparation Preparation! Guest Drivers Launcher Host Switcher Mastery:
 	@sh ../../Documentation/lguest/extract $(PREFIX) `find ../../* -name '*.[chS]' -wholename '*lguest*'`
+Puppy:
+	@clear
+	@printf "      __  \n (___()'\`;\n /,    /\`\n \\\\\\\"--\\\\\\   \n"
+	@sleep 2; clear; printf "\n\n   Sit!\n\n"; sleep 1; clear
+	@printf "    __    \n   ()'\`;  \n   /\\|\` \n  /  |  \n(/_)_|_   \n"
+	@sleep 2; clear; printf "\n\n  Stand!\n\n"; sleep 1; clear
+	@printf "    __    \n   ()'\`;  \n   /\\|\` \n  /._.= \n /| /     \n(_\_)_    \n"
+	@sleep 2; clear; printf "\n\n  Good puppy!\n\n"; sleep 1; clear
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index c632c08c..5eea435 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -1,8 +1,6 @@
 /*P:400 This contains run_guest() which actually calls into the Host<->Guest
  * Switcher and analyzes the return, such as determining if the Guest wants the
- * Host to do something.  This file also contains useful helper routines, and a
- * couple of non-obvious setup and teardown pieces which were implemented after
- * days of debugging pain. :*/
+ * Host to do something.  This file also contains useful helper routines. :*/
 #include <linux/module.h>
 #include <linux/stringify.h>
 #include <linux/stddef.h>
@@ -49,8 +47,8 @@
 	 * easy.
 	 */
 
-	/* We allocate an array of "struct page"s.  map_vm_area() wants the
-	 * pages in this form, rather than just an array of pointers. */
+	/* We allocate an array of struct page pointers.  map_vm_area() wants
+	 * this, rather than just an array of pages. */
 	switcher_page = kmalloc(sizeof(switcher_page[0])*TOTAL_SWITCHER_PAGES,
 				GFP_KERNEL);
 	if (!switcher_page) {
@@ -172,7 +170,7 @@
 	}
 }
 
-/* This is the write (copy into guest) version. */
+/* This is the write (copy into Guest) version. */
 void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b,
 	       unsigned bytes)
 {
@@ -209,9 +207,9 @@
 		if (cpu->break_out)
 			return -EAGAIN;
 
-		/* Check if there are any interrupts which can be delivered
-		 * now: if so, this sets up the hander to be executed when we
-		 * next run the Guest. */
+		/* Check if there are any interrupts which can be delivered now:
+		 * if so, this sets up the hander to be executed when we next
+		 * run the Guest. */
 		maybe_do_interrupt(cpu);
 
 		/* All long-lived kernel loops need to check with this horrible
@@ -246,8 +244,10 @@
 		lguest_arch_handle_trap(cpu);
 	}
 
+	/* Special case: Guest is 'dead' but wants a reboot. */
 	if (cpu->lg->dead == ERR_PTR(-ERESTART))
 		return -ERESTART;
+
 	/* The Guest is dead => "No such file or directory" */
 	return -ENOENT;
 }
diff --git a/drivers/lguest/hypercalls.c b/drivers/lguest/hypercalls.c
index 0f2cb4f..54d66f0 100644
--- a/drivers/lguest/hypercalls.c
+++ b/drivers/lguest/hypercalls.c
@@ -29,7 +29,7 @@
 #include "lg.h"
 
 /*H:120 This is the core hypercall routine: where the Guest gets what it wants.
- * Or gets killed.  Or, in the case of LHCALL_CRASH, both. */
+ * Or gets killed.  Or, in the case of LHCALL_SHUTDOWN, both. */
 static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
 {
 	switch (args->arg0) {
@@ -190,6 +190,13 @@
 	 * pagetable. */
 	guest_pagetable_clear_all(cpu);
 }
+/*:*/
+
+/*M:013 If a Guest reads from a page (so creates a mapping) that it has never
+ * written to, and then the Launcher writes to it (ie. the output of a virtual
+ * device), the Guest will still see the old page.  In practice, this never
+ * happens: why would the Guest read a page which it has never written to?  But
+ * a similar scenario might one day bite us, so it's worth mentioning. :*/
 
 /*H:100
  * Hypercalls
@@ -227,7 +234,7 @@
 		 * However, if we are signalled or the Guest sends I/O to the
 		 * Launcher, the run_guest() loop will exit without running the
 		 * Guest.  When it comes back it would try to re-run the
-		 * hypercall. */
+		 * hypercall.  Finding that bug sucked. */
 		cpu->hcall = NULL;
 	}
 }
diff --git a/drivers/lguest/interrupts_and_traps.c b/drivers/lguest/interrupts_and_traps.c
index 32e97c1..0414ddf 100644
--- a/drivers/lguest/interrupts_and_traps.c
+++ b/drivers/lguest/interrupts_and_traps.c
@@ -144,7 +144,6 @@
 	if (copy_from_user(&blk, cpu->lg->lguest_data->blocked_interrupts,
 			   sizeof(blk)))
 		return;
-
 	bitmap_andnot(blk, cpu->irqs_pending, blk, LGUEST_IRQS);
 
 	/* Find the first interrupt. */
@@ -237,9 +236,9 @@
 		clear_bit(syscall_vector, used_vectors);
 }
 
-/*H:220 Now we've got the routines to deliver interrupts, delivering traps
- * like page fault is easy.  The only trick is that Intel decided that some
- * traps should have error codes: */
+/*H:220 Now we've got the routines to deliver interrupts, delivering traps like
+ * page fault is easy.  The only trick is that Intel decided that some traps
+ * should have error codes: */
 static int has_err(unsigned int trap)
 {
 	return (trap == 8 || (trap >= 10 && trap <= 14) || trap == 17);
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index 1b2ec0b..2bc9bf7 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -1,10 +1,10 @@
 /*P:050 Lguest guests use a very simple method to describe devices.  It's a
- * series of device descriptors contained just above the top of normal
+ * series of device descriptors contained just above the top of normal Guest
  * memory.
  *
  * We use the standard "virtio" device infrastructure, which provides us with a
  * console, a network and a block driver.  Each one expects some configuration
- * information and a "virtqueue" mechanism to send and receive data. :*/
+ * information and a "virtqueue" or two to send and receive data. :*/
 #include <linux/init.h>
 #include <linux/bootmem.h>
 #include <linux/lguest_launcher.h>
@@ -53,7 +53,7 @@
  * Device configurations
  *
  * The configuration information for a device consists of one or more
- * virtqueues, a feature bitmaks, and some configuration bytes.  The
+ * virtqueues, a feature bitmap, and some configuration bytes.  The
  * configuration bytes don't really matter to us: the Launcher sets them up, and
  * the driver will look at them during setup.
  *
@@ -179,7 +179,7 @@
 };
 
 /* When the virtio_ring code wants to prod the Host, it calls us here and we
- * make a hypercall.  We hand the page number of the virtqueue so the Host
+ * make a hypercall.  We hand the physical address of the virtqueue so the Host
  * knows which virtqueue we're talking about. */
 static void lg_notify(struct virtqueue *vq)
 {
@@ -199,7 +199,8 @@
  * allocate its own pages and tell the Host where they are, but for lguest it's
  * simpler for the Host to simply tell us where the pages are.
  *
- * So we provide devices with a "find virtqueue and set it up" function. */
+ * So we provide drivers with a "find the Nth virtqueue and set it up"
+ * function. */
 static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
 				    unsigned index,
 				    void (*callback)(struct virtqueue *vq))
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index 2221485..645e6e0 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -73,7 +73,7 @@
 	if (current != cpu->tsk)
 		return -EPERM;
 
-	/* If the guest is already dead, we indicate why */
+	/* If the Guest is already dead, we indicate why */
 	if (lg->dead) {
 		size_t len;
 
@@ -88,7 +88,7 @@
 		return len;
 	}
 
-	/* If we returned from read() last time because the Guest notified,
+	/* If we returned from read() last time because the Guest sent I/O,
 	 * clear the flag. */
 	if (cpu->pending_notify)
 		cpu->pending_notify = 0;
@@ -97,14 +97,20 @@
 	return run_guest(cpu, (unsigned long __user *)user);
 }
 
+/*L:025 This actually initializes a CPU.  For the moment, a Guest is only
+ * uniprocessor, so "id" is always 0. */
 static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
 {
+	/* We have a limited number the number of CPUs in the lguest struct. */
 	if (id >= NR_CPUS)
 		return -EINVAL;
 
+	/* Set up this CPU's id, and pointer back to the lguest struct. */
 	cpu->id = id;
 	cpu->lg = container_of((cpu - id), struct lguest, cpus[0]);
 	cpu->lg->nr_cpus++;
+
+	/* Each CPU has a timer it can set. */
 	init_clockdev(cpu);
 
 	/* We need a complete page for the Guest registers: they are accessible
@@ -120,11 +126,11 @@
 	 * address. */
 	lguest_arch_setup_regs(cpu, start_ip);
 
-	/* Initialize the queue for the waker to wait on */
+	/* Initialize the queue for the Waker to wait on */
 	init_waitqueue_head(&cpu->break_wq);
 
 	/* We keep a pointer to the Launcher task (ie. current task) for when
-	 * other Guests want to wake this one (inter-Guest I/O). */
+	 * other Guests want to wake this one (eg. console input). */
 	cpu->tsk = current;
 
 	/* We need to keep a pointer to the Launcher's memory map, because if
@@ -136,6 +142,7 @@
 	 * when the same Guest runs on the same CPU twice. */
 	cpu->last_pages = NULL;
 
+	/* No error == success. */
 	return 0;
 }
 
@@ -182,17 +189,16 @@
 	}
 
 	/* Populate the easy fields of our "struct lguest" */
-	lg->mem_base = (void __user *)(long)args[0];
+	lg->mem_base = (void __user *)args[0];
 	lg->pfn_limit = args[1];
 
-	/* This is the first cpu */
+	/* This is the first cpu (cpu 0) and it will start booting at args[3] */
 	err = lg_cpu_start(&lg->cpus[0], 0, args[3]);
 	if (err)
 		goto release_guest;
 
 	/* Initialize the Guest's shadow page tables, using the toplevel
-	 * address the Launcher gave us.  This allocates memory, so can
-	 * fail. */
+	 * address the Launcher gave us.  This allocates memory, so can fail. */
 	err = init_guest_pagetable(lg, args[2]);
 	if (err)
 		goto free_regs;
@@ -218,11 +224,16 @@
 /*L:010 The first operation the Launcher does must be a write.  All writes
  * start with an unsigned long number: for the first write this must be
  * LHREQ_INITIALIZE to set up the Guest.  After that the Launcher can use
- * writes of other values to send interrupts. */
+ * writes of other values to send interrupts.
+ *
+ * Note that we overload the "offset" in the /dev/lguest file to indicate what
+ * CPU number we're dealing with.  Currently this is always 0, since we only
+ * support uniprocessor Guests, but you can see the beginnings of SMP support
+ * here. */
 static ssize_t write(struct file *file, const char __user *in,
 		     size_t size, loff_t *off)
 {
-	/* Once the guest is initialized, we hold the "struct lguest" in the
+	/* Once the Guest is initialized, we hold the "struct lguest" in the
 	 * file private data. */
 	struct lguest *lg = file->private_data;
 	const unsigned long __user *input = (const unsigned long __user *)in;
@@ -230,6 +241,7 @@
 	struct lg_cpu *uninitialized_var(cpu);
 	unsigned int cpu_id = *off;
 
+	/* The first value tells us what this request is. */
 	if (get_user(req, input) != 0)
 		return -EFAULT;
 	input++;
diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c
index a7f64a9..d93500f 100644
--- a/drivers/lguest/page_tables.c
+++ b/drivers/lguest/page_tables.c
@@ -2,8 +2,8 @@
  * previous encounters.  It's functional, and as neat as it can be in the
  * circumstances, but be wary, for these things are subtle and break easily.
  * The Guest provides a virtual to physical mapping, but we can neither trust
- * it nor use it: we verify and convert it here to point the hardware to the
- * actual Guest pages when running the Guest. :*/
+ * it nor use it: we verify and convert it here then point the CPU to the
+ * converted Guest pages when running the Guest. :*/
 
 /* Copyright (C) Rusty Russell IBM Corporation 2006.
  * GPL v2 and any later version */
@@ -106,6 +106,11 @@
 	BUG_ON(!(pgd_flags(gpgd) & _PAGE_PRESENT));
 	return gpage + ((vaddr>>PAGE_SHIFT) % PTRS_PER_PTE) * sizeof(pte_t);
 }
+/*:*/
+
+/*M:014 get_pfn is slow; it takes the mmap sem and calls get_user_pages.  We
+ * could probably try to grab batches of pages here as an optimization
+ * (ie. pre-faulting). :*/
 
 /*H:350 This routine takes a page number given by the Guest and converts it to
  * an actual, physical page number.  It can fail for several reasons: the
@@ -113,8 +118,8 @@
  * and the page is read-only, or the write flag was set and the page was
  * shared so had to be copied, but we ran out of memory.
  *
- * This holds a reference to the page, so release_pte() is careful to
- * put that back. */
+ * This holds a reference to the page, so release_pte() is careful to put that
+ * back. */
 static unsigned long get_pfn(unsigned long virtpfn, int write)
 {
 	struct page *page;
@@ -532,13 +537,13 @@
  * all processes.  So when the page table above that address changes, we update
  * all the page tables, not just the current one.  This is rare.
  *
- * The benefit is that when we have to track a new page table, we can copy keep
- * all the kernel mappings.  This speeds up context switch immensely. */
+ * The benefit is that when we have to track a new page table, we can keep all
+ * the kernel mappings.  This speeds up context switch immensely. */
 void guest_set_pte(struct lg_cpu *cpu,
 		   unsigned long gpgdir, unsigned long vaddr, pte_t gpte)
 {
-	/* Kernel mappings must be changed on all top levels.  Slow, but
-	 * doesn't happen often. */
+	/* Kernel mappings must be changed on all top levels.  Slow, but doesn't
+	 * happen often. */
 	if (vaddr >= cpu->lg->kernel_address) {
 		unsigned int i;
 		for (i = 0; i < ARRAY_SIZE(cpu->lg->pgdirs); i++)
@@ -704,12 +709,11 @@
 /* We've made it through the page table code.  Perhaps our tired brains are
  * still processing the details, or perhaps we're simply glad it's over.
  *
- * If nothing else, note that all this complexity in juggling shadow page
- * tables in sync with the Guest's page tables is for one reason: for most
- * Guests this page table dance determines how bad performance will be.  This
- * is why Xen uses exotic direct Guest pagetable manipulation, and why both
- * Intel and AMD have implemented shadow page table support directly into
- * hardware.
+ * If nothing else, note that all this complexity in juggling shadow page tables
+ * in sync with the Guest's page tables is for one reason: for most Guests this
+ * page table dance determines how bad performance will be.  This is why Xen
+ * uses exotic direct Guest pagetable manipulation, and why both Intel and AMD
+ * have implemented shadow page table support directly into hardware.
  *
  * There is just one file remaining in the Host. */
 
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
index 6351878..5126d5d 100644
--- a/drivers/lguest/x86/core.c
+++ b/drivers/lguest/x86/core.c
@@ -17,6 +17,13 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
+/*P:450 This file contains the x86-specific lguest code.  It used to be all
+ * mixed in with drivers/lguest/core.c but several foolhardy code slashers
+ * wrestled most of the dependencies out to here in preparation for porting
+ * lguest to other architectures (see what I mean by foolhardy?).
+ *
+ * This also contains a couple of non-obvious setup and teardown pieces which
+ * were implemented after days of debugging pain. :*/
 #include <linux/kernel.h>
 #include <linux/start_kernel.h>
 #include <linux/string.h>
@@ -157,6 +164,8 @@
  * also simplify copy_in_guest_info().  Note that we'd still need to restore
  * things when we exit to Launcher userspace, but that's fairly easy.
  *
+ * We could also try using this hooks for PGE, but that might be too expensive.
+ *
  * The hooks were designed for KVM, but we can also put them to good use. :*/
 
 /*H:040 This is the i386-specific code to setup and run the Guest.  Interrupts
@@ -182,7 +191,7 @@
 	 * was doing. */
 	run_guest_once(cpu, lguest_pages(raw_smp_processor_id()));
 
-	/* Note that the "regs" pointer contains two extra entries which are
+	/* Note that the "regs" structure contains two extra entries which are
 	 * not really registers: a trap number which says what interrupt or
 	 * trap made the switcher code come back, and an error code which some
 	 * traps set.  */
@@ -293,11 +302,10 @@
 		break;
 	case 14: /* We've intercepted a Page Fault. */
 		/* The Guest accessed a virtual address that wasn't mapped.
-		 * This happens a lot: we don't actually set up most of the
-		 * page tables for the Guest at all when we start: as it runs
-		 * it asks for more and more, and we set them up as
-		 * required. In this case, we don't even tell the Guest that
-		 * the fault happened.
+		 * This happens a lot: we don't actually set up most of the page
+		 * tables for the Guest at all when we start: as it runs it asks
+		 * for more and more, and we set them up as required. In this
+		 * case, we don't even tell the Guest that the fault happened.
 		 *
 		 * The errcode tells whether this was a read or a write, and
 		 * whether kernel or userspace code. */
@@ -342,7 +350,7 @@
 	if (!deliver_trap(cpu, cpu->regs->trapnum))
 		/* If the Guest doesn't have a handler (either it hasn't
 		 * registered any yet, or it's one of the faults we don't let
-		 * it handle), it dies with a cryptic error message. */
+		 * it handle), it dies with this cryptic error message. */
 		kill_guest(cpu, "unhandled trap %li at %#lx (%#lx)",
 			   cpu->regs->trapnum, cpu->regs->eip,
 			   cpu->regs->trapnum == 14 ? cpu->arch.last_pagefault
@@ -375,8 +383,8 @@
 	 * The only exception is the interrupt handlers in switcher.S: their
 	 * addresses are placed in a table (default_idt_entries), so we need to
 	 * update the table with the new addresses.  switcher_offset() is a
-	 * convenience function which returns the distance between the builtin
-	 * switcher code and the high-mapped copy we just made. */
+	 * convenience function which returns the distance between the
+	 * compiled-in switcher code and the high-mapped copy we just made. */
 	for (i = 0; i < IDT_ENTRIES; i++)
 		default_idt_entries[i] += switcher_offset();
 
@@ -416,7 +424,7 @@
 		state->guest_gdt_desc.address = (long)&state->guest_gdt;
 
 		/* We know where we want the stack to be when the Guest enters
-		 * the switcher: in pages->regs.  The stack grows upwards, so
+		 * the Switcher: in pages->regs.  The stack grows upwards, so
 		 * we start it at the end of that structure. */
 		state->guest_tss.sp0 = (long)(&pages->regs + 1);
 		/* And this is the GDT entry to use for the stack: we keep a
@@ -513,8 +521,8 @@
 {
 	u32 tsc_speed;
 
-	/* The pointer to the Guest's "struct lguest_data" is the only
-	 * argument.  We check that address now. */
+	/* The pointer to the Guest's "struct lguest_data" is the only argument.
+	 * We check that address now. */
 	if (!lguest_address_ok(cpu->lg, cpu->hcall->arg1,
 			       sizeof(*cpu->lg->lguest_data)))
 		return -EFAULT;
@@ -546,6 +554,7 @@
 
 	return 0;
 }
+/*:*/
 
 /*L:030 lguest_arch_setup_regs()
  *
diff --git a/drivers/lguest/x86/switcher_32.S b/drivers/lguest/x86/switcher_32.S
index 0af8baa..3fc1531 100644
--- a/drivers/lguest/x86/switcher_32.S
+++ b/drivers/lguest/x86/switcher_32.S
@@ -1,6 +1,6 @@
-/*P:900 This is the Switcher: code which sits at 0xFFC00000 to do the low-level
- * Guest<->Host switch.  It is as simple as it can be made, but it's naturally
- * very specific to x86.
+/*P:900 This is the Switcher: code which sits at 0xFFC00000 astride both the
+ * Host and Guest to do the low-level Guest<->Host switch.  It is as simple as
+ * it can be made, but it's naturally very specific to x86.
  *
  * You have now completed Preparation.  If this has whet your appetite; if you
  * are feeling invigorated and refreshed then the next, more challenging stage
@@ -189,7 +189,7 @@
 	// Interrupts are turned back on: we are Guest.
 	iret
 
-// We treat two paths to switch back to the Host
+// We tread two paths to switch back to the Host
 // Yet both must save Guest state and restore Host
 // So we put the routine in a macro.
 #define SWITCH_TO_HOST							\
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index b04f98d..835def1 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -1,7 +1,7 @@
 /*
  * Copyright (C) 2003 Christophe Saout <christophe@saout.de>
  * Copyright (C) 2004 Clemens Fruhwirth <clemens@endorphin.org>
- * Copyright (C) 2006-2007 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2006-2008 Red Hat, Inc. All rights reserved.
  *
  * This file is released under the GPL.
  */
@@ -93,6 +93,8 @@
 
 	struct workqueue_struct *io_queue;
 	struct workqueue_struct *crypt_queue;
+	wait_queue_head_t writeq;
+
 	/*
 	 * crypto related data
 	 */
@@ -331,14 +333,7 @@
 	ctx->idx_out = bio_out ? bio_out->bi_idx : 0;
 	ctx->sector = sector + cc->iv_offset;
 	init_completion(&ctx->restart);
-	/*
-	 * Crypto operation can be asynchronous,
-	 * ctx->pending is increased after request submission.
-	 * We need to ensure that we don't call the crypt finish
-	 * operation before pending got incremented
-	 * (dependent on crypt submission return code).
-	 */
-	atomic_set(&ctx->pending, 2);
+	atomic_set(&ctx->pending, 1);
 }
 
 static int crypt_convert_block(struct crypt_config *cc,
@@ -411,43 +406,42 @@
 static int crypt_convert(struct crypt_config *cc,
 			 struct convert_context *ctx)
 {
-	int r = 0;
+	int r;
 
 	while(ctx->idx_in < ctx->bio_in->bi_vcnt &&
 	      ctx->idx_out < ctx->bio_out->bi_vcnt) {
 
 		crypt_alloc_req(cc, ctx);
 
+		atomic_inc(&ctx->pending);
+
 		r = crypt_convert_block(cc, ctx, cc->req);
 
 		switch (r) {
+		/* async */
 		case -EBUSY:
 			wait_for_completion(&ctx->restart);
 			INIT_COMPLETION(ctx->restart);
 			/* fall through*/
 		case -EINPROGRESS:
-			atomic_inc(&ctx->pending);
 			cc->req = NULL;
-			r = 0;
-			/* fall through*/
-		case 0:
 			ctx->sector++;
 			continue;
-		}
 
-		break;
+		/* sync */
+		case 0:
+			atomic_dec(&ctx->pending);
+			ctx->sector++;
+			continue;
+
+		/* error */
+		default:
+			atomic_dec(&ctx->pending);
+			return r;
+		}
 	}
 
-	/*
-	 * If there are pending crypto operation run async
-	 * code. Otherwise process return code synchronously.
-	 * The step of 2 ensures that async finish doesn't
-	 * call crypto finish too early.
-	 */
-	if (atomic_sub_return(2, &ctx->pending))
-		return -EINPROGRESS;
-
-	return r;
+	return 0;
 }
 
 static void dm_crypt_bio_destructor(struct bio *bio)
@@ -624,8 +618,10 @@
 static void kcryptd_io_write(struct dm_crypt_io *io)
 {
 	struct bio *clone = io->ctx.bio_out;
+	struct crypt_config *cc = io->target->private;
 
 	generic_make_request(clone);
+	wake_up(&cc->writeq);
 }
 
 static void kcryptd_io(struct work_struct *work)
@@ -698,7 +694,8 @@
 
 		r = crypt_convert(cc, &io->ctx);
 
-		if (r != -EINPROGRESS) {
+		if (atomic_dec_and_test(&io->ctx.pending)) {
+			/* processed, no running async crypto  */
 			kcryptd_crypt_write_io_submit(io, r, 0);
 			if (unlikely(r < 0))
 				return;
@@ -706,8 +703,12 @@
 			atomic_inc(&io->pending);
 
 		/* out of memory -> run queues */
-		if (unlikely(remaining))
+		if (unlikely(remaining)) {
+			/* wait for async crypto then reinitialize pending */
+			wait_event(cc->writeq, !atomic_read(&io->ctx.pending));
+			atomic_set(&io->ctx.pending, 1);
 			congestion_wait(WRITE, HZ/100);
+		}
 	}
 }
 
@@ -746,7 +747,7 @@
 
 	r = crypt_convert(cc, &io->ctx);
 
-	if (r != -EINPROGRESS)
+	if (atomic_dec_and_test(&io->ctx.pending))
 		kcryptd_crypt_read_done(io, r);
 
 	crypt_dec_pending(io);
@@ -1047,6 +1048,7 @@
 		goto bad_crypt_queue;
 	}
 
+	init_waitqueue_head(&cc->writeq);
 	ti->private = cc;
 	return 0;
 
diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c
index b8e342f..8f25f62 100644
--- a/drivers/md/dm-io.c
+++ b/drivers/md/dm-io.c
@@ -114,7 +114,7 @@
 			wake_up_process(io->sleeper);
 
 		else {
-			int r = io->error;
+			unsigned long r = io->error;
 			io_notify_fn fn = io->callback;
 			void *context = io->context;
 
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index 5160587..762cb08 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -753,7 +753,7 @@
  * are in the no-sync state.  We have to recover these by
  * recopying from the default mirror to all the others.
  *---------------------------------------------------------------*/
-static void recovery_complete(int read_err, unsigned int write_err,
+static void recovery_complete(int read_err, unsigned long write_err,
 			      void *context)
 {
 	struct region *reg = (struct region *)context;
@@ -767,7 +767,7 @@
 	}
 
 	if (write_err) {
-		DMERR_LIMIT("Write error during recovery (error = 0x%x)",
+		DMERR_LIMIT("Write error during recovery (error = 0x%lx)",
 			    write_err);
 		/*
 		 * Bits correspond to devices (excluding default mirror).
diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c
index ae24eab..4dc8a43c 100644
--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -804,7 +804,7 @@
  * Called when the copy I/O has finished.  kcopyd actually runs
  * this code so don't block.
  */
-static void copy_callback(int read_err, unsigned int write_err, void *context)
+static void copy_callback(int read_err, unsigned long write_err, void *context)
 {
 	struct dm_snap_pending_exception *pe = context;
 	struct dm_snapshot *s = pe->snap;
diff --git a/drivers/md/kcopyd.c b/drivers/md/kcopyd.c
index f3831f3..e76b52a 100644
--- a/drivers/md/kcopyd.c
+++ b/drivers/md/kcopyd.c
@@ -169,7 +169,7 @@
 	 * Error state of the job.
 	 */
 	int read_err;
-	unsigned int write_err;
+	unsigned long write_err;
 
 	/*
 	 * Either READ or WRITE
@@ -293,7 +293,7 @@
 {
 	void *context = job->context;
 	int read_err = job->read_err;
-	unsigned int write_err = job->write_err;
+	unsigned long write_err = job->write_err;
 	kcopyd_notify_fn fn = job->fn;
 	struct kcopyd_client *kc = job->kc;
 
@@ -396,7 +396,7 @@
 		if (r < 0) {
 			/* error this rogue job */
 			if (job->rw == WRITE)
-				job->write_err = (unsigned int) -1;
+				job->write_err = (unsigned long) -1L;
 			else
 				job->read_err = 1;
 			push(&_complete_jobs, job);
@@ -448,8 +448,8 @@
 }
 
 #define SUB_JOB_SIZE 128
-static void segment_complete(int read_err,
-			     unsigned int write_err, void *context)
+static void segment_complete(int read_err, unsigned long write_err,
+			     void *context)
 {
 	/* FIXME: tidy this function */
 	sector_t progress = 0;
diff --git a/drivers/md/kcopyd.h b/drivers/md/kcopyd.h
index 4621ea0..4845f2a 100644
--- a/drivers/md/kcopyd.h
+++ b/drivers/md/kcopyd.h
@@ -32,8 +32,8 @@
  * read_err is a boolean,
  * write_err is a bitset, with 1 bit for each destination region
  */
-typedef void (*kcopyd_notify_fn)(int read_err,
-				 unsigned int write_err, void *context);
+typedef void (*kcopyd_notify_fn)(int read_err, unsigned long write_err,
+				 void *context);
 
 int kcopyd_copy(struct kcopyd_client *kc, struct io_region *from,
 		unsigned int num_dests, struct io_region *dests,
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index c574cf5e..b162b83 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2348,25 +2348,15 @@
 static void handle_parity_checks5(raid5_conf_t *conf, struct stripe_head *sh,
 				struct stripe_head_state *s, int disks)
 {
-	set_bit(STRIPE_HANDLE, &sh->state);
-	/* Take one of the following actions:
-	 * 1/ start a check parity operation if (uptodate == disks)
-	 * 2/ finish a check parity operation and act on the result
-	 * 3/ skip to the writeback section if we previously
-	 *    initiated a recovery operation
-	 */
-	if (s->failed == 0 &&
-	    !test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) {
-		if (!test_and_set_bit(STRIPE_OP_CHECK, &sh->ops.pending)) {
-			BUG_ON(s->uptodate != disks);
-			clear_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags);
-			sh->ops.count++;
-			s->uptodate--;
-		} else if (
-		       test_and_clear_bit(STRIPE_OP_CHECK, &sh->ops.complete)) {
-			clear_bit(STRIPE_OP_CHECK, &sh->ops.ack);
-			clear_bit(STRIPE_OP_CHECK, &sh->ops.pending);
+	int canceled_check = 0;
 
+	set_bit(STRIPE_HANDLE, &sh->state);
+
+	/* complete a check operation */
+	if (test_and_clear_bit(STRIPE_OP_CHECK, &sh->ops.complete)) {
+	    clear_bit(STRIPE_OP_CHECK, &sh->ops.ack);
+	    clear_bit(STRIPE_OP_CHECK, &sh->ops.pending);
+		if (s->failed == 0) {
 			if (sh->ops.zero_sum_result == 0)
 				/* parity is correct (on disc,
 				 * not in buffer any more)
@@ -2391,7 +2381,8 @@
 					s->uptodate++;
 				}
 			}
-		}
+		} else
+			canceled_check = 1; /* STRIPE_INSYNC is not set */
 	}
 
 	/* check if we can clear a parity disk reconstruct */
@@ -2404,12 +2395,28 @@
 		clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending);
 	}
 
-	/* Wait for check parity and compute block operations to complete
-	 * before write-back
+	/* start a new check operation if there are no failures, the stripe is
+	 * not insync, and a repair is not in flight
 	 */
-	if (!test_bit(STRIPE_INSYNC, &sh->state) &&
-		!test_bit(STRIPE_OP_CHECK, &sh->ops.pending) &&
-		!test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending)) {
+	if (s->failed == 0 &&
+	    !test_bit(STRIPE_INSYNC, &sh->state) &&
+	    !test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) {
+		if (!test_and_set_bit(STRIPE_OP_CHECK, &sh->ops.pending)) {
+			BUG_ON(s->uptodate != disks);
+			clear_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags);
+			sh->ops.count++;
+			s->uptodate--;
+		}
+	}
+
+	/* Wait for check parity and compute block operations to complete
+	 * before write-back.  If a failure occurred while the check operation
+	 * was in flight we need to cycle this stripe through handle_stripe
+	 * since the parity block may not be uptodate
+	 */
+	if (!canceled_check && !test_bit(STRIPE_INSYNC, &sh->state) &&
+	    !test_bit(STRIPE_OP_CHECK, &sh->ops.pending) &&
+	    !test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending)) {
 		struct r5dev *dev;
 		/* either failed parity check, or recovery is happening */
 		if (s->failed == 0)
diff --git a/drivers/media/Makefile b/drivers/media/Makefile
index 8cf9135..7b8bb69 100644
--- a/drivers/media/Makefile
+++ b/drivers/media/Makefile
@@ -6,3 +6,6 @@
 obj-y += video/
 obj-$(CONFIG_VIDEO_DEV) += radio/
 obj-$(CONFIG_DVB_CORE)  += dvb/
+ifeq ($(CONFIG_DVB_CORE),)
+  obj-$(CONFIG_VIDEO_TUNER)  += dvb/frontends/
+endif
diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c
index 168a8d3..7707b8c 100644
--- a/drivers/media/common/saa7146_core.c
+++ b/drivers/media/common/saa7146_core.c
@@ -306,25 +306,22 @@
 		return IRQ_NONE;
 	}
 
-	if( 0 != (dev->ext)) {
-		if( 0 != (dev->ext->irq_mask & isr )) {
-			if( 0 != dev->ext->irq_func ) {
+	if (dev->ext) {
+		if (dev->ext->irq_mask & isr) {
+			if (dev->ext->irq_func)
 				dev->ext->irq_func(dev, &isr);
-			}
 			isr &= ~dev->ext->irq_mask;
 		}
 	}
 	if (0 != (isr & (MASK_27))) {
 		DEB_INT(("irq: RPS0 (0x%08x).\n",isr));
-		if( 0 != dev->vv_data && 0 != dev->vv_callback) {
+		if (dev->vv_data && dev->vv_callback)
 			dev->vv_callback(dev,isr);
-		}
 		isr &= ~MASK_27;
 	}
 	if (0 != (isr & (MASK_28))) {
-		if( 0 != dev->vv_data && 0 != dev->vv_callback) {
+		if (dev->vv_data && dev->vv_callback)
 			dev->vv_callback(dev,isr);
-		}
 		isr &= ~MASK_28;
 	}
 	if (0 != (isr & (MASK_16|MASK_17))) {
diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c
index f0703d8..171afe7 100644
--- a/drivers/media/common/saa7146_fops.c
+++ b/drivers/media/common/saa7146_fops.c
@@ -272,7 +272,7 @@
 
 	result = 0;
 out:
-	if( fh != 0 && result != 0 ) {
+	if (fh && result != 0) {
 		kfree(fh);
 		file->private_data = NULL;
 	}
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index ed3f826..4c8b62e2c 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -784,8 +784,8 @@
 {
 	struct net_device *dev = feed->priv;
 
-	if (buffer2 != 0)
-		printk(KERN_WARNING "buffer2 not 0: %p.\n", buffer2);
+	if (buffer2)
+		printk(KERN_WARNING "buffer2 not NULL: %p.\n", buffer2);
 	if (buffer1_len > 32768)
 		printk(KERN_WARNING "length > 32k: %zu.\n", buffer1_len);
 	/* printk("TS callback: %u bytes, %u TS cells @ %p.\n",
diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c
index 8194334..1a4d831 100644
--- a/drivers/media/dvb/frontends/s5h1409.c
+++ b/drivers/media/dvb/frontends/s5h1409.c
@@ -445,7 +445,7 @@
 			s5h1409_readreg(state, 0xe3) | 0x1100);
 	else
 		return s5h1409_writereg(state, 0xe3,
-			s5h1409_readreg(state, 0xe3) & 0xeeff);
+			s5h1409_readreg(state, 0xe3) & 0xfeff);
 }
 
 static int s5h1409_sleep(struct dvb_frontend* fe, int enable)
diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c
index 34e317c..57b9e3a 100644
--- a/drivers/media/radio/radio-cadet.c
+++ b/drivers/media/radio/radio-cadet.c
@@ -587,6 +587,8 @@
 	.vidioc_s_input     = vidioc_s_input,
 };
 
+#ifdef CONFIG_PNP
+
 static struct pnp_device_id cadet_pnp_devices[] = {
 	/* ADS Cadet AM/FM Radio Card */
 	{.id = "MSM0c24", .driver_data = 0},
@@ -621,6 +623,10 @@
 	.remove		= NULL,
 };
 
+#else
+static struct pnp_driver cadet_pnp_driver;
+#endif
+
 static int cadet_probe(void)
 {
 	static int iovals[8]={0x330,0x332,0x334,0x336,0x338,0x33a,0x33c,0x33e};
diff --git a/drivers/media/video/adv7170.c b/drivers/media/video/adv7170.c
index cbab53f..fea2e72 100644
--- a/drivers/media/video/adv7170.c
+++ b/drivers/media/video/adv7170.c
@@ -408,7 +408,7 @@
 		return 0;
 
 	client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == 0)
+	if (!client)
 		return -ENOMEM;
 	client->addr = address;
 	client->adapter = adapter;
diff --git a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c
index 0d0c554..10d4d89 100644
--- a/drivers/media/video/adv7175.c
+++ b/drivers/media/video/adv7175.c
@@ -426,7 +426,7 @@
 		return 0;
 
 	client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == 0)
+	if (!client)
 		return -ENOMEM;
 	client->addr = address;
 	client->adapter = adapter;
diff --git a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c
index 12d1b92..e663cc0 100644
--- a/drivers/media/video/bt819.c
+++ b/drivers/media/video/bt819.c
@@ -524,7 +524,7 @@
 		return 0;
 
 	client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == 0)
+	if (!client)
 		return -ENOMEM;
 	client->addr = address;
 	client->adapter = adapter;
diff --git a/drivers/media/video/bt856.c b/drivers/media/video/bt856.c
index e1028a7..7dee2e3 100644
--- a/drivers/media/video/bt856.c
+++ b/drivers/media/video/bt856.c
@@ -311,7 +311,7 @@
 		return 0;
 
 	client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == 0)
+	if (!client)
 		return -ENOMEM;
 	client->addr = address;
 	client->adapter = adapter;
diff --git a/drivers/media/video/bt8xx/bt832.c b/drivers/media/video/bt8xx/bt832.c
index a518761..f92f06d 100644
--- a/drivers/media/video/bt8xx/bt832.c
+++ b/drivers/media/video/bt8xx/bt832.c
@@ -97,6 +97,11 @@
 	int rc;
 
 	buf=kmalloc(65,GFP_KERNEL);
+	if (!buf) {
+		v4l_err(&t->client,
+			"Unable to allocate memory. Detaching.\n");
+		return 0;
+	}
 	bt832_hexdump(i2c_client_s,buf);
 
 	if(buf[0x40] != 0x31) {
@@ -211,7 +216,12 @@
 	switch (cmd) {
 		case BT832_HEXDUMP: {
 			unsigned char *buf;
-			buf=kmalloc(65,GFP_KERNEL);
+			buf = kmalloc(65, GFP_KERNEL);
+			if (!buf) {
+				v4l_err(&t->client,
+					"Unable to allocate memory\n");
+				break;
+			}
 			bt832_hexdump(&t->client,buf);
 			kfree(buf);
 		}
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index a080c14..fcf8f2d 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -1990,7 +1990,7 @@
 	if (0 != err)
 		return err;
 
-	f->type = V4L2_TUNER_ANALOG_TV;
+	f->type = btv->radio_user ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
 	f->frequency = btv->freq;
 
 	return 0;
@@ -2009,7 +2009,8 @@
 
 	if (unlikely(f->tuner != 0))
 		return -EINVAL;
-	if (unlikely(f->type != V4L2_TUNER_ANALOG_TV))
+	if (unlikely(f->type != (btv->radio_user
+		? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV)))
 		return -EINVAL;
 	mutex_lock(&btv->lock);
 	btv->freq = f->frequency;
@@ -3415,6 +3416,7 @@
 {
 	int minor = iminor(inode);
 	struct bttv *btv = NULL;
+	struct bttv_fh *fh;
 	unsigned int i;
 
 	dprintk("bttv: open minor=%d\n",minor);
@@ -3429,12 +3431,19 @@
 		return -ENODEV;
 
 	dprintk("bttv%d: open called (radio)\n",btv->c.nr);
+
+	/* allocate per filehandle data */
+	fh = kmalloc(sizeof(*fh), GFP_KERNEL);
+	if (NULL == fh)
+		return -ENOMEM;
+	file->private_data = fh;
+	*fh = btv->init;
+	v4l2_prio_open(&btv->prio, &fh->prio);
+
 	mutex_lock(&btv->lock);
 
 	btv->radio_user++;
 
-	file->private_data = btv;
-
 	bttv_call_i2c_clients(btv,AUDC_SET_RADIO,NULL);
 	audio_input(btv,TVAUDIO_INPUT_RADIO);
 
@@ -3444,7 +3453,8 @@
 
 static int radio_release(struct inode *inode, struct file *file)
 {
-	struct bttv *btv = file->private_data;
+	struct bttv_fh *fh = file->private_data;
+	struct bttv *btv = fh->btv;
 	struct rds_command cmd;
 
 	btv->radio_user--;
@@ -3508,8 +3518,12 @@
 static int radio_g_audio(struct file *file, void *priv,
 					struct v4l2_audio *a)
 {
+	if (a->index != 0)
+		return -EINVAL;
+
 	memset(a, 0, sizeof(*a));
 	strcpy(a->name, "Radio");
+
 	return 0;
 }
 
@@ -3569,7 +3583,8 @@
 static ssize_t radio_read(struct file *file, char __user *data,
 			 size_t count, loff_t *ppos)
 {
-	struct bttv    *btv = file->private_data;
+	struct bttv_fh *fh = file->private_data;
+	struct bttv *btv = fh->btv;
 	struct rds_command cmd;
 	cmd.block_count = count/3;
 	cmd.buffer = data;
@@ -3583,7 +3598,8 @@
 
 static unsigned int radio_poll(struct file *file, poll_table *wait)
 {
-	struct bttv    *btv = file->private_data;
+	struct bttv_fh *fh = file->private_data;
+	struct bttv *btv = fh->btv;
 	struct rds_command cmd;
 	cmd.instance = file;
 	cmd.event_list = wait;
@@ -3599,6 +3615,7 @@
 	.open	  = radio_open,
 	.read     = radio_read,
 	.release  = radio_release,
+	.compat_ioctl	= v4l_compat_ioctl32,
 	.ioctl	  = video_ioctl2,
 	.llseek	  = no_llseek,
 	.poll     = radio_poll,
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 2d414da..dfa2698 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -232,6 +232,7 @@
 	case 78631: /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
 	case 79001: /* WinTV-HVR1250 (PCIe, Retail, IR, full height, ATSC and Basic analog */
 	case 79101: /* WinTV-HVR1250 (PCIe, Retail, IR, half height, ATSC and Basic analog */
+	case 79561: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
 	case 79571: /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, ATSC and Basic analog */
 	case 79671: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
 		break;
@@ -347,10 +348,13 @@
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+		if (dev->i2c_bus[0].i2c_rc == 0)
+			hauppauge_eeprom(dev, eeprom+0x80);
+		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1800:
 	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
 		if (dev->i2c_bus[0].i2c_rc == 0)
-			hauppauge_eeprom(dev, eeprom+0x80);
+			hauppauge_eeprom(dev, eeprom+0xc0);
 		break;
 	}
 
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index 8e40c7b..7f10b273 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -56,137 +56,6 @@
 
 #define NO_SYNC_LINE (-1U)
 
-/*
- * CX23885 Assumptions
- * 1 line = 16 bytes of CDT
- * cmds size = 80
- * cdt size = 16 * linesize
- * iqsize = 64
- * maxlines = 6
- *
- * Address Space:
- * 0x00000000 0x00008fff FIFO clusters
- * 0x00010000 0x000104af Channel Management Data Structures
- * 0x000104b0 0x000104ff Free
- * 0x00010500 0x000108bf 15 channels * iqsize
- * 0x000108c0 0x000108ff Free
- * 0x00010900 0x00010e9f IQ's + Cluster Descriptor Tables
- *                       15 channels * (iqsize + (maxlines * linesize))
- * 0x00010ea0 0x00010xxx Free
- */
-
-static struct sram_channel cx23885_sram_channels[] = {
-	[SRAM_CH01] = {
-		.name		= "VID A",
-		.cmds_start	= 0x10000,
-		.ctrl_start	= 0x105b0,
-		.cdt		= 0x107b0,
-		.fifo_start	= 0x40,
-		.fifo_size	= 0x2800,
-		.ptr1_reg	= DMA1_PTR1,
-		.ptr2_reg	= DMA1_PTR2,
-		.cnt1_reg	= DMA1_CNT1,
-		.cnt2_reg	= DMA1_CNT2,
-		.jumponly	= 1,
-	},
-	[SRAM_CH02] = {
-		.name		= "ch2",
-		.cmds_start	= 0x0,
-		.ctrl_start	= 0x0,
-		.cdt		= 0x0,
-		.fifo_start	= 0x0,
-		.fifo_size	= 0x0,
-		.ptr1_reg	= DMA2_PTR1,
-		.ptr2_reg	= DMA2_PTR2,
-		.cnt1_reg	= DMA2_CNT1,
-		.cnt2_reg	= DMA2_CNT2,
-	},
-	[SRAM_CH03] = {
-		.name		= "TS1 B",
-		.cmds_start	= 0x100A0,
-		.ctrl_start	= 0x10630,
-		.cdt		= 0x10870,
-		.fifo_start	= 0x5000,
-		.fifo_size	= 0x1000,
-		.ptr1_reg	= DMA3_PTR1,
-		.ptr2_reg	= DMA3_PTR2,
-		.cnt1_reg	= DMA3_CNT1,
-		.cnt2_reg	= DMA3_CNT2,
-	},
-	[SRAM_CH04] = {
-		.name		= "ch4",
-		.cmds_start	= 0x0,
-		.ctrl_start	= 0x0,
-		.cdt		= 0x0,
-		.fifo_start	= 0x0,
-		.fifo_size	= 0x0,
-		.ptr1_reg	= DMA4_PTR1,
-		.ptr2_reg	= DMA4_PTR2,
-		.cnt1_reg	= DMA4_CNT1,
-		.cnt2_reg	= DMA4_CNT2,
-	},
-	[SRAM_CH05] = {
-		.name		= "ch5",
-		.cmds_start	= 0x0,
-		.ctrl_start	= 0x0,
-		.cdt		= 0x0,
-		.fifo_start	= 0x0,
-		.fifo_size	= 0x0,
-		.ptr1_reg	= DMA5_PTR1,
-		.ptr2_reg	= DMA5_PTR2,
-		.cnt1_reg	= DMA5_CNT1,
-		.cnt2_reg	= DMA5_CNT2,
-	},
-	[SRAM_CH06] = {
-		.name		= "TS2 C",
-		.cmds_start	= 0x10140,
-		.ctrl_start	= 0x10680,
-		.cdt		= 0x108d0,
-		.fifo_start	= 0x6000,
-		.fifo_size	= 0x1000,
-		.ptr1_reg	= DMA5_PTR1,
-		.ptr2_reg	= DMA5_PTR2,
-		.cnt1_reg	= DMA5_CNT1,
-		.cnt2_reg	= DMA5_CNT2,
-	},
-	[SRAM_CH07] = {
-		.name		= "ch7",
-		.cmds_start	= 0x0,
-		.ctrl_start	= 0x0,
-		.cdt		= 0x0,
-		.fifo_start	= 0x0,
-		.fifo_size	= 0x0,
-		.ptr1_reg	= DMA6_PTR1,
-		.ptr2_reg	= DMA6_PTR2,
-		.cnt1_reg	= DMA6_CNT1,
-		.cnt2_reg	= DMA6_CNT2,
-	},
-	[SRAM_CH08] = {
-		.name		= "ch8",
-		.cmds_start	= 0x0,
-		.ctrl_start	= 0x0,
-		.cdt		= 0x0,
-		.fifo_start	= 0x0,
-		.fifo_size	= 0x0,
-		.ptr1_reg	= DMA7_PTR1,
-		.ptr2_reg	= DMA7_PTR2,
-		.cnt1_reg	= DMA7_CNT1,
-		.cnt2_reg	= DMA7_CNT2,
-	},
-	[SRAM_CH09] = {
-		.name		= "ch9",
-		.cmds_start	= 0x0,
-		.ctrl_start	= 0x0,
-		.cdt		= 0x0,
-		.fifo_start	= 0x0,
-		.fifo_size	= 0x0,
-		.ptr1_reg	= DMA8_PTR1,
-		.ptr2_reg	= DMA8_PTR2,
-		.cnt1_reg	= DMA8_CNT1,
-		.cnt2_reg	= DMA8_CNT2,
-	},
-};
-
 /* FIXME, these allocations will change when
  * analog arrives. The be reviewed.
  * CX23887 Assumptions
@@ -754,6 +623,7 @@
 	atomic_inc(&dev->refcount);
 
 	dev->nr = cx23885_devcount++;
+	dev->sram_channels = cx23887_sram_channels;
 	sprintf(dev->name, "cx23885[%d]", dev->nr);
 
 	mutex_lock(&devlist);
@@ -763,13 +633,11 @@
 	/* Configure the internal memory */
 	if(dev->pci->device == 0x8880) {
 		dev->bridge = CX23885_BRIDGE_887;
-		dev->sram_channels = cx23887_sram_channels;
 		/* Apply a sensible clock frequency for the PCIe bridge */
 		dev->clk_freq = 25000000;
 	} else
 	if(dev->pci->device == 0x8852) {
 		dev->bridge = CX23885_BRIDGE_885;
-		dev->sram_channels = cx23885_sram_channels;
 		/* Apply a sensible clock frequency for the PCIe bridge */
 		dev->clk_freq = 28000000;
 	} else
diff --git a/drivers/media/video/dpc7146.c b/drivers/media/video/dpc7146.c
index 566e479..9ceb6b2 100644
--- a/drivers/media/video/dpc7146.c
+++ b/drivers/media/video/dpc7146.c
@@ -131,7 +131,7 @@
 	device_for_each_child(&dpc->i2c_adapter.dev, dpc, dpc_check_clients);
 
 	/* check if all devices are present */
-	if( 0 == dpc->saa7111a ) {
+	if (!dpc->saa7111a) {
 		DEB_D(("dpc_v4l2.o: dpc_attach failed for this device.\n"));
 		i2c_del_adapter(&dpc->i2c_adapter);
 		kfree(dpc);
diff --git a/drivers/media/video/mt20xx.c b/drivers/media/video/mt20xx.c
index 58bab65..74fd6a0 100644
--- a/drivers/media/video/mt20xx.c
+++ b/drivers/media/video/mt20xx.c
@@ -647,7 +647,7 @@
 	default:
 		tuner_info("microtune %s found, not (yet?) supported, sorry :-/\n",
 			   name);
-		return 0;
+		return NULL;
 	}
 
 	strlcpy(fe->ops.tuner_ops.info.name, name,
diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
index add6d0d..cb5a510 100644
--- a/drivers/media/video/mxb.c
+++ b/drivers/media/video/mxb.c
@@ -221,9 +221,8 @@
 	device_for_each_child(&mxb->i2c_adapter.dev, mxb, mxb_check_clients);
 
 	/* check if all devices are present */
-	if(    0 == mxb->tea6420_1	|| 0 == mxb->tea6420_2	|| 0 == mxb->tea6415c
-	    || 0 == mxb->tda9840	|| 0 == mxb->saa7111a	|| 0 == mxb->tuner ) {
-
+	if (!mxb->tea6420_1 || !mxb->tea6420_2 || !mxb->tea6415c ||
+	    !mxb->tda9840 || !mxb->saa7111a || !mxb->tuner) {
 		printk("mxb: did not find all i2c devices. aborting\n");
 		i2c_del_adapter(&mxb->i2c_adapter);
 		kfree(mxb);
diff --git a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
index 46f156fb..5a3e8d2 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
@@ -60,7 +60,7 @@
 	int ret = 0;
 	if (!cptr) return -EINVAL;
 	LOCK_TAKE(cptr->hdw->big_lock); do {
-		if (cptr->info->set_value != 0) {
+		if (cptr->info->set_value) {
 			if (cptr->info->type == pvr2_ctl_bitmask) {
 				mask &= cptr->info->def.type_bitmask.valid_bits;
 			} else if (cptr->info->type == pvr2_ctl_int) {
@@ -265,7 +265,7 @@
 int pvr2_ctrl_is_writable(struct pvr2_ctrl *cptr)
 {
 	if (!cptr) return 0;
-	return cptr->info->set_value != 0;
+	return cptr->info->set_value != NULL;
 }
 
 
diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
index 4df6d6d..fe9991c 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
@@ -155,6 +155,41 @@
 
 
 /*------------------------------------------------------------------------*/
+/* Hauppauge PVR-USB2 Model 73xxx */
+
+static const char *pvr2_client_73xxx[] = {
+	"cx25840",
+	"tuner",
+};
+
+static const char *pvr2_fw1_names_73xxx[] = {
+		"v4l-pvrusb2-73xxx-01.fw",
+};
+
+static const struct pvr2_device_desc pvr2_device_73xxx = {
+		.description = "WinTV PVR USB2 Model Category 73xxxx",
+		.shortname = "73xxx",
+		.client_modules.lst = pvr2_client_73xxx,
+		.client_modules.cnt = ARRAY_SIZE(pvr2_client_73xxx),
+		.fx2_firmware.lst = pvr2_fw1_names_73xxx,
+		.fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_73xxx),
+		.flag_has_cx25840 = !0,
+		.flag_has_hauppauge_rom = !0,
+#if 0
+		.flag_has_analogtuner = !0,
+		.flag_has_composite = !0,
+		.flag_has_svideo = !0,
+		.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
+		.digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
+		.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
+#else
+		.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
+#endif
+};
+
+
+
+/*------------------------------------------------------------------------*/
 /* Hauppauge PVR-USB2 Model 75xxx */
 
 static const char *pvr2_client_75xxx[] = {
@@ -198,8 +233,12 @@
 	{ USB_DEVICE(0x11ba, 0x1001),
 	  .driver_info = (kernel_ulong_t)&pvr2_device_onair_usb2},
 #endif
+	{ USB_DEVICE(0x2040, 0x7300),
+	  .driver_info = (kernel_ulong_t)&pvr2_device_73xxx},
 	{ USB_DEVICE(0x2040, 0x7500),
 	  .driver_info = (kernel_ulong_t)&pvr2_device_75xxx},
+	{ USB_DEVICE(0x2040, 0x7501),
+	  .driver_info = (kernel_ulong_t)&pvr2_device_75xxx},
 	{ }
 };
 
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index 41ae980..d6955fa3 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -2291,7 +2291,7 @@
 
 	for (idx = 0; idx < hdw->control_cnt; idx++) {
 		cptr = hdw->controls + idx;
-		if (cptr->info->is_dirty == 0) continue;
+		if (!cptr->info->is_dirty) continue;
 		if (!cptr->info->is_dirty(cptr)) continue;
 		commit_flag = !0;
 
@@ -2646,7 +2646,7 @@
 	u16 address;
 	unsigned int pipe;
 	LOCK_TAKE(hdw->big_lock); do {
-		if ((hdw->fw_buffer == 0) == !enable_flag) break;
+		if ((hdw->fw_buffer == NULL) == !enable_flag) break;
 
 		if (!enable_flag) {
 			pvr2_trace(PVR2_TRACE_FIRMWARE,
@@ -2715,7 +2715,7 @@
 /* Return true if we're in a mode for retrieval CPU firmware */
 int pvr2_hdw_cpufw_get_enabled(struct pvr2_hdw *hdw)
 {
-	return hdw->fw_buffer != 0;
+	return hdw->fw_buffer != NULL;
 }
 
 
diff --git a/drivers/media/video/pvrusb2/pvrusb2-io.c b/drivers/media/video/pvrusb2/pvrusb2-io.c
index ce3c898..a9889ff9 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-io.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-io.c
@@ -563,7 +563,7 @@
 	struct pvr2_buffer *bp;
 	mutex_lock(&sp->mutex); do {
 		pvr2_stream_internal_flush(sp);
-		while ((bp = pvr2_stream_get_ready_buffer(sp)) != 0) {
+		while ((bp = pvr2_stream_get_ready_buffer(sp)) != NULL) {
 			pvr2_buffer_set_idle(bp);
 		}
 		if (sp->buffer_total_count != sp->buffer_target_count) {
diff --git a/drivers/media/video/pvrusb2/pvrusb2-ioread.c b/drivers/media/video/pvrusb2/pvrusb2-ioread.c
index f782418..c572212 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-ioread.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-ioread.c
@@ -165,7 +165,7 @@
 	if (!(cp->stream)) return 0;
 	pvr2_trace(PVR2_TRACE_START_STOP,
 		   "/*---TRACE_READ---*/ pvr2_ioread_start id=%p",cp);
-	while ((bp = pvr2_stream_get_idle_buffer(cp->stream)) != 0) {
+	while ((bp = pvr2_stream_get_idle_buffer(cp->stream)) != NULL) {
 		stat = pvr2_buffer_queue(bp);
 		if (stat < 0) {
 			pvr2_trace(PVR2_TRACE_DATA_FLOW,
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index f991d72..e0a453a 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -915,7 +915,7 @@
 		struct urb *urb;
 
 		urb = pdev->sbuf[i].urb;
-		if (urb != 0) {
+		if (urb) {
 			PWC_DEBUG_MEMORY("Unlinking URB %p\n", urb);
 			usb_kill_urb(urb);
 		}
@@ -931,7 +931,7 @@
 		struct urb *urb;
 
 		urb = pdev->sbuf[i].urb;
-		if (urb != 0) {
+		if (urb) {
 			PWC_DEBUG_MEMORY("Freeing URB\n");
 			usb_free_urb(urb);
 			pdev->sbuf[i].urb = NULL;
@@ -1759,8 +1759,7 @@
 
 	/* Allocate video_device structure */
 	pdev->vdev = video_device_alloc();
-	if (pdev->vdev == 0)
-	{
+	if (!pdev->vdev) {
 		PWC_ERROR("Err, cannot allocate video_device struture. Failing probe.");
 		kfree(pdev);
 		return -ENOMEM;
diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c
index 061134a..1df2602 100644
--- a/drivers/media/video/saa7110.c
+++ b/drivers/media/video/saa7110.c
@@ -488,7 +488,7 @@
 		return 0;
 
 	client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == 0)
+	if (!client)
 		return -ENOMEM;
 	client->addr = address;
 	client->adapter = adapter;
@@ -496,7 +496,7 @@
 	strlcpy(I2C_NAME(client), "saa7110", sizeof(I2C_NAME(client)));
 
 	decoder = kzalloc(sizeof(struct saa7110), GFP_KERNEL);
-	if (decoder == 0) {
+	if (!decoder) {
 		kfree(client);
 		return -ENOMEM;
 	}
diff --git a/drivers/media/video/saa7111.c b/drivers/media/video/saa7111.c
index 7ae2d646..a0772c5 100644
--- a/drivers/media/video/saa7111.c
+++ b/drivers/media/video/saa7111.c
@@ -502,7 +502,7 @@
 		return 0;
 
 	client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == 0)
+	if (!client)
 		return -ENOMEM;
 	client->addr = address;
 	client->adapter = adapter;
diff --git a/drivers/media/video/saa7114.c b/drivers/media/video/saa7114.c
index 677df51..bf91a4f 100644
--- a/drivers/media/video/saa7114.c
+++ b/drivers/media/video/saa7114.c
@@ -841,7 +841,7 @@
 		return 0;
 
 	client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == 0)
+	if (!client)
 		return -ENOMEM;
 	client->addr = address;
 	client->adapter = adapter;
diff --git a/drivers/media/video/saa7185.c b/drivers/media/video/saa7185.c
index 66cc92c..41f7044 100644
--- a/drivers/media/video/saa7185.c
+++ b/drivers/media/video/saa7185.c
@@ -403,7 +403,7 @@
 		return 0;
 
 	client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == 0)
+	if (!client)
 		return -ENOMEM;
 	client->addr = address;
 	client->adapter = adapter;
diff --git a/drivers/media/video/tda9840.c b/drivers/media/video/tda9840.c
index ef494fe..bdca5d2 100644
--- a/drivers/media/video/tda9840.c
+++ b/drivers/media/video/tda9840.c
@@ -172,7 +172,7 @@
 
 	/* allocate memory for client structure */
 	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (0 == client) {
+	if (!client) {
 		printk("not enough kernel memory\n");
 		return -ENOMEM;
 	}
diff --git a/drivers/media/video/tea6415c.c b/drivers/media/video/tea6415c.c
index 523df0b..df2fad9 100644
--- a/drivers/media/video/tea6415c.c
+++ b/drivers/media/video/tea6415c.c
@@ -64,7 +64,7 @@
 
 	/* allocate memory for client structure */
 	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (0 == client) {
+	if (!client) {
 		return -ENOMEM;
 	}
 
diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c
index ca05cd6..4ff6c63 100644
--- a/drivers/media/video/tea6420.c
+++ b/drivers/media/video/tea6420.c
@@ -101,7 +101,7 @@
 
 	/* allocate memory for client structure */
 	client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (0 == client) {
+	if (!client) {
 		return -ENOMEM;
 	}
 
diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c
index d28318c..b6e24e7 100644
--- a/drivers/media/video/tvp5150.c
+++ b/drivers/media/video/tvp5150.c
@@ -1072,12 +1072,12 @@
 		return 0;
 
 	c = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (c == 0)
+	if (!c)
 		return -ENOMEM;
 	memcpy(c, &client_template, sizeof(struct i2c_client));
 
 	core = kzalloc(sizeof(struct tvp5150), GFP_KERNEL);
-	if (core == 0) {
+	if (!core) {
 		kfree(c);
 		return -ENOMEM;
 	}
diff --git a/drivers/media/video/v4l2-int-device.c b/drivers/media/video/v4l2-int-device.c
index a545dca..0e45499 100644
--- a/drivers/media/video/v4l2-int-device.c
+++ b/drivers/media/video/v4l2-int-device.c
@@ -156,3 +156,5 @@
 		find_ioctl(d->u.slave, cmd,
 			   (v4l2_int_ioctl_func *)no_such_ioctl_1))(d, arg);
 }
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c
index dd3d7d2..fea4946 100644
--- a/drivers/media/video/zoran_driver.c
+++ b/drivers/media/video/zoran_driver.c
@@ -339,7 +339,7 @@
 			/* Use kmalloc */
 
 			mem = kmalloc(fh->v4l_buffers.buffer_size, GFP_KERNEL);
-			if (mem == 0) {
+			if (!mem) {
 				dprintk(1,
 					KERN_ERR
 					"%s: v4l_fbuffer_alloc() - kmalloc for V4L buf %d failed\n",
diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c
index 1b44784..04949c8 100644
--- a/drivers/media/video/zr364xx.c
+++ b/drivers/media/video/zr364xx.c
@@ -390,7 +390,7 @@
 }
 
 
-static ssize_t zr364xx_read(struct file *file, char *buf, size_t cnt,
+static ssize_t zr364xx_read(struct file *file, char __user *buf, size_t cnt,
 			    loff_t * ppos)
 {
 	unsigned long count = cnt;
diff --git a/drivers/memstick/host/tifm_ms.c b/drivers/memstick/host/tifm_ms.c
index eb150df..8577de4 100644
--- a/drivers/memstick/host/tifm_ms.c
+++ b/drivers/memstick/host/tifm_ms.c
@@ -182,7 +182,7 @@
 	struct tifm_dev *sock = host->dev;
 	unsigned int length;
 	unsigned int off;
-	unsigned int t_size, p_off, p_cnt;
+	unsigned int t_size, p_cnt;
 	unsigned char *buf;
 	struct page *pg;
 	unsigned long flags = 0;
@@ -198,6 +198,8 @@
 		host->block_pos);
 
 	while (length) {
+		unsigned int uninitialized_var(p_off);
+
 		if (host->req->long_data) {
 			pg = nth_page(sg_page(&host->req->sg),
 				      off >> PAGE_SHIFT);
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index 63fb1ff3..f6f2d96 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -28,14 +28,14 @@
 static inline void asic3_write_register(struct asic3 *asic,
 				 unsigned int reg, u32 value)
 {
-	iowrite16(value, (unsigned long)asic->mapping +
+	iowrite16(value, asic->mapping +
 		  (reg >> asic->bus_shift));
 }
 
 static inline u32 asic3_read_register(struct asic3 *asic,
 			       unsigned int reg)
 {
-	return ioread16((unsigned long)asic->mapping +
+	return ioread16(asic->mapping +
 			(reg >> asic->bus_shift));
 }
 
diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c
index 1cfd7f3..e2e7c05 100644
--- a/drivers/misc/fujitsu-laptop.c
+++ b/drivers/misc/fujitsu-laptop.c
@@ -231,7 +231,7 @@
 
 	if (!device || !acpi_driver_data(device))
 		return -EINVAL;
-	fujitsu->acpi_handle = 0;
+	fujitsu->acpi_handle = NULL;
 
 	return 0;
 }
diff --git a/drivers/misc/ibmasm/module.c b/drivers/misc/ibmasm/module.c
index 4f9d4a9..b5f6add 100644
--- a/drivers/misc/ibmasm/module.c
+++ b/drivers/misc/ibmasm/module.c
@@ -106,7 +106,7 @@
 	sp->irq = pdev->irq;
 	sp->base_address = ioremap(pci_resource_start(pdev, 0),
 					pci_resource_len(pdev, 0));
-	if (sp->base_address == 0) {
+	if (!sp->base_address) {
 		dev_err(sp->dev, "Failed to ioremap pci memory\n");
 		result =  -ENODEV;
 		goto error_ioremap;
diff --git a/drivers/misc/lkdtm.c b/drivers/misc/lkdtm.c
index c884730..1bfe5d1 100644
--- a/drivers/misc/lkdtm.c
+++ b/drivers/misc/lkdtm.c
@@ -197,7 +197,7 @@
 {
 	int i;
 
-	if (cpoint_name == INVALID || cpoint_type == NONE ||
+	if (cpoint_name == NULL || cpoint_type == NULL ||
 					cpoint_count < 1 || recur_count < 1)
 		return -EINVAL;
 
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 47794d23..0080452 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -718,7 +718,7 @@
 			/* Someone else might have been playing with it. */
 			return -EAGAIN;
 		}
-
+		/* Fall through */
 	case FL_READY:
 	case FL_CFI_QUERY:
 	case FL_JEDEC_QUERY:
@@ -778,14 +778,14 @@
 		chip->state = FL_READY;
 		return 0;
 
+	case FL_SHUTDOWN:
+		/* The machine is rebooting now,so no one can get chip anymore */
+		return -EIO;
 	case FL_POINT:
 		/* Only if there's no operation suspended... */
 		if (mode == FL_READY && chip->oldstate == FL_READY)
 			return 0;
-
-	case FL_SHUTDOWN:
-		/* The machine is rebooting now,so no one can get chip anymore */
-		return -EIO;
+		/* Fall through */
 	default:
 	sleep:
 		set_current_state(TASK_UNINTERRUPTIBLE);
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index d072e87..458d477 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1763,6 +1763,7 @@
 
 		default:
 			/* Not an idle state */
+			set_current_state(TASK_UNINTERRUPTIBLE);
 			add_wait_queue(&chip->wq, &wait);
 
 			spin_unlock(chip->mutex);
diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c
index b344ff8..492e2ab 100644
--- a/drivers/mtd/chips/cfi_cmdset_0020.c
+++ b/drivers/mtd/chips/cfi_cmdset_0020.c
@@ -1015,6 +1015,7 @@
 
 		default:
 			/* Not an idle state */
+			set_current_state(TASK_UNINTERRUPTIBLE);
 			add_wait_queue(&chip->wq, &wait);
 
 			spin_unlock_bh(chip->mutex);
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index f00e04e..bc4649a1 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -202,9 +202,8 @@
 	int ret = 0;
 	int i;
 
-	if (info)
-		for (i = 0; i < MAX_RESOURCES; i++)
-			ret |= info->mtd[i]->suspend(info->mtd[i]);
+	for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
+		ret |= info->mtd[i]->suspend(info->mtd[i]);
 
 	return ret;
 }
@@ -214,9 +213,9 @@
 	struct physmap_flash_info *info = platform_get_drvdata(dev);
 	int i;
 
-	if (info)
-		for (i = 0; i < MAX_RESOURCES; i++)
-			info->mtd[i]->resume(info->mtd[i]);
+	for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
+		info->mtd[i]->resume(info->mtd[i]);
+
 	return 0;
 }
 
@@ -225,8 +224,8 @@
 	struct physmap_flash_info *info = platform_get_drvdata(dev);
 	int i;
 
-	for (i = 0; i < MAX_RESOURCES; i++)
-		if (info && info->mtd[i]->suspend(info->mtd[i]) == 0)
+	for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
+		if (info->mtd[i]->suspend(info->mtd[i]) == 0)
 			info->mtd[i]->resume(info->mtd[i]);
 }
 #else
diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c
index 9189ec8..0f6ac25 100644
--- a/drivers/mtd/nand/rtc_from4.c
+++ b/drivers/mtd/nand/rtc_from4.c
@@ -460,7 +460,7 @@
 			er_stat |= 1 << 1;
 		kfree(buf);
 	}
-
+out:
 	rtn = status;
 	if (er_stat == 0) {	/* if ECC is available   */
 		rtn = (status & ~NAND_STATUS_FAIL);	/*   clear the error bit */
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 124d29f..0b44daa3 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2635,7 +2635,7 @@
 
 config PASEMI_MAC
 	tristate "PA Semi 1/10Gbit MAC"
-	depends on PPC64 && PCI
+	depends on PPC_PASEMI && PCI
 	select PHYLIB
 	select INET_LRO
 	help
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index ea2a2b5..25f1337 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -2082,6 +2082,11 @@
 		addr = sdev->bus->sprom.et0mac;
 		bp->phy_addr = sdev->bus->sprom.et0phyaddr;
 	}
+	/* Some ROMs have buggy PHY addresses with the high
+	 * bits set (sign extension?). Truncate them to a
+	 * valid PHY address. */
+	bp->phy_addr &= 0x1F;
+
 	memcpy(bp->dev->dev_addr, addr, 6);
 
 	if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index c993a32..26b2dd5 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -575,7 +575,6 @@
 static int bf537mac_hard_start_xmit(struct sk_buff *skb,
 				struct net_device *dev)
 {
-	struct bf537mac_local *lp = netdev_priv(dev);
 	unsigned int data;
 
 	current_tx_ptr->skb = skb;
@@ -634,7 +633,6 @@
 static void bf537mac_rx(struct net_device *dev)
 {
 	struct sk_buff *skb, *new_skb;
-	struct bf537mac_local *lp = netdev_priv(dev);
 	unsigned short len;
 
 	/* allocate a new skb for next time receive */
diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c
index de32b3f..7bdb5af 100644
--- a/drivers/net/bnx2x.c
+++ b/drivers/net/bnx2x.c
@@ -63,8 +63,8 @@
 #include "bnx2x.h"
 #include "bnx2x_init.h"
 
-#define DRV_MODULE_VERSION      "1.42.3"
-#define DRV_MODULE_RELDATE      "2008/3/9"
+#define DRV_MODULE_VERSION      "1.42.4"
+#define DRV_MODULE_RELDATE      "2008/4/9"
 #define BNX2X_BC_VER    	0x040200
 
 /* Time in jiffies before concluding the transmitter is hung. */
@@ -6153,7 +6153,7 @@
 		   func, mode);
 		REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
 		       0xffffffff);
-		REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
+		REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
 		       0xfffc);
 		bnx2x_init_block(bp, MISC_COMMON_START, MISC_COMMON_END);
 
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index cb3c6fa..d16e0e1 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -310,7 +310,7 @@
  */
 static inline void __get_rx_machine_lock(struct port *port)
 {
-	spin_lock(&(SLAVE_AD_INFO(port->slave).rx_machine_lock));
+	spin_lock_bh(&(SLAVE_AD_INFO(port->slave).rx_machine_lock));
 }
 
 /**
@@ -320,7 +320,7 @@
  */
 static inline void __release_rx_machine_lock(struct port *port)
 {
-	spin_unlock(&(SLAVE_AD_INFO(port->slave).rx_machine_lock));
+	spin_unlock_bh(&(SLAVE_AD_INFO(port->slave).rx_machine_lock));
 }
 
 /**
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index b57bc94..3f58c3d 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -678,12 +678,8 @@
 		}
 
 		if (!list_empty(&bond->vlan_list)) {
-			unsigned short vlan_id;
-			int res = vlan_get_tag(skb, &vlan_id);
-			if (!res) {
+			if (!vlan_get_tag(skb, &client_info->vlan_id))
 				client_info->tag = 1;
-				client_info->vlan_id = vlan_id;
-			}
 		}
 
 		if (!client_info->assigned) {
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 0942d82..0f067531 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -383,7 +383,7 @@
  */
 int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_device *slave_dev)
 {
-	unsigned short vlan_id;
+	unsigned short uninitialized_var(vlan_id);
 
 	if (!list_empty(&bond->vlan_list) &&
 	    !(slave_dev->features & NETIF_F_HW_VLAN_TX) &&
@@ -4528,8 +4528,7 @@
 		netif_tx_unlock_bh(bond_dev);
 		/* Release the bonded slaves */
 		bond_release_all(bond_dev);
-		bond_deinit(bond_dev);
-		unregister_netdevice(bond_dev);
+		bond_destroy(bond);
 	}
 
 #ifdef CONFIG_PROC_FS
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 90a1f31..979c2d0 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -341,6 +341,7 @@
 
 	if (command[0] == '-') {
 		dev = NULL;
+		original_mtu = 0;
 		bond_for_each_slave(bond, slave, i)
 			if (strnicmp(slave->dev->name, ifname, IFNAMSIZ) == 0) {
 				dev = slave->dev;
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 67ccad6..a3c74e2 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -22,8 +22,8 @@
 #include "bond_3ad.h"
 #include "bond_alb.h"
 
-#define DRV_VERSION	"3.2.4"
-#define DRV_RELDATE	"January 28, 2008"
+#define DRV_VERSION	"3.2.5"
+#define DRV_RELDATE	"March 21, 2008"
 #define DRV_NAME	"bonding"
 #define DRV_DESCRIPTION	"Ethernet Channel Bonding Driver"
 
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index db58687..98a6bbd 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -557,9 +557,9 @@
 
 	for (i = 0; i < SGE_RXQ_PER_SET; ++i)
 		if (q->fl[i].desc) {
-			spin_lock(&adapter->sge.reg_lock);
+			spin_lock_irq(&adapter->sge.reg_lock);
 			t3_sge_disable_fl(adapter, q->fl[i].cntxt_id);
-			spin_unlock(&adapter->sge.reg_lock);
+			spin_unlock_irq(&adapter->sge.reg_lock);
 			free_rx_bufs(pdev, &q->fl[i]);
 			kfree(q->fl[i].sdesc);
 			dma_free_coherent(&pdev->dev,
@@ -570,9 +570,9 @@
 
 	for (i = 0; i < SGE_TXQ_PER_SET; ++i)
 		if (q->txq[i].desc) {
-			spin_lock(&adapter->sge.reg_lock);
+			spin_lock_irq(&adapter->sge.reg_lock);
 			t3_sge_enable_ecntxt(adapter, q->txq[i].cntxt_id, 0);
-			spin_unlock(&adapter->sge.reg_lock);
+			spin_unlock_irq(&adapter->sge.reg_lock);
 			if (q->txq[i].sdesc) {
 				free_tx_desc(adapter, &q->txq[i],
 					     q->txq[i].in_use);
@@ -586,9 +586,9 @@
 		}
 
 	if (q->rspq.desc) {
-		spin_lock(&adapter->sge.reg_lock);
+		spin_lock_irq(&adapter->sge.reg_lock);
 		t3_sge_disable_rspcntxt(adapter, q->rspq.cntxt_id);
-		spin_unlock(&adapter->sge.reg_lock);
+		spin_unlock_irq(&adapter->sge.reg_lock);
 		dma_free_coherent(&pdev->dev,
 				  q->rspq.size * sizeof(struct rsp_desc),
 				  q->rspq.desc, q->rspq.phys_addr);
@@ -2667,7 +2667,7 @@
 		(16 * 1024) - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) :
 		MAX_FRAME_SIZE + 2 + sizeof(struct cpl_rx_pkt);
 
-	spin_lock(&adapter->sge.reg_lock);
+	spin_lock_irq(&adapter->sge.reg_lock);
 
 	/* FL threshold comparison uses < */
 	ret = t3_sge_init_rspcntxt(adapter, q->rspq.cntxt_id, irq_vec_idx,
@@ -2711,7 +2711,7 @@
 			goto err_unlock;
 	}
 
-	spin_unlock(&adapter->sge.reg_lock);
+	spin_unlock_irq(&adapter->sge.reg_lock);
 
 	q->adap = adapter;
 	q->netdev = dev;
@@ -2728,7 +2728,7 @@
 	return 0;
 
       err_unlock:
-	spin_unlock(&adapter->sge.reg_lock);
+	spin_unlock_irq(&adapter->sge.reg_lock);
       err:
 	t3_free_qset(adapter, q);
 	return ret;
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 1fe305c..d63cc93 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -798,8 +798,6 @@
 	/* Set address filter table */
 	dm9000_hash_table(dev);
 
-	/* Activate DM9000 */
-	iow(db, DM9000_RCR, RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN);
 	/* Enable TX/RX interrupt mask */
 	iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM);
 
@@ -970,7 +968,7 @@
 struct dm9000_rxhdr {
 	u8	RxPktReady;
 	u8	RxStatus;
-	u16	RxLen;
+	__le16	RxLen;
 } __attribute__((__packed__));
 
 /*
@@ -1197,6 +1195,7 @@
 	int i, oft;
 	u32 hash_val;
 	u16 hash_table[4];
+	u8 rcr = RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN;
 	unsigned long flags;
 
 	dm9000_dbg(db, 1, "entering %s\n", __func__);
@@ -1213,6 +1212,12 @@
 	/* broadcast address */
 	hash_table[3] = 0x8000;
 
+	if (dev->flags & IFF_PROMISC)
+		rcr |= RCR_PRMSC;
+
+	if (dev->flags & IFF_ALLMULTI)
+		rcr |= RCR_ALL;
+
 	/* the multicast address in Hash Table : 64 bits */
 	for (i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
 		hash_val = ether_crc_le(6, mcptr->dmi_addr) & 0x3f;
@@ -1225,6 +1230,7 @@
 		iow(db, oft++, hash_table[i] >> 8);
 	}
 
+	iow(db, DM9000_RCR, rcr);
 	spin_unlock_irqrestore(&db->lock, flags);
 }
 
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index cdf3090..2d139ec 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -960,7 +960,7 @@
 
 	/* Template for a freshly allocated RFD */
 	nic->blank_rfd.command = 0;
-	nic->blank_rfd.rbd = 0xFFFFFFFF;
+	nic->blank_rfd.rbd = cpu_to_le32(0xFFFFFFFF);
 	nic->blank_rfd.size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
 
 	/* MII setup */
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 7c4ead3..93b7fb2 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -40,7 +40,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"ehea"
-#define DRV_VERSION	"EHEA_0087"
+#define DRV_VERSION	"EHEA_0089"
 
 /* eHEA capability flags */
 #define DLPAR_PORT_ADD_REM 1
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 21af674..07c742d 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -3108,7 +3108,7 @@
 	dev->vlan_rx_add_vid = ehea_vlan_rx_add_vid;
 	dev->vlan_rx_kill_vid = ehea_vlan_rx_kill_vid;
 	dev->features = NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_TSO
-		      | NETIF_F_HIGHDMA | NETIF_F_HW_CSUM | NETIF_F_HW_VLAN_TX
+		      | NETIF_F_HIGHDMA | NETIF_F_IP_CSUM | NETIF_F_HW_VLAN_TX
 		      | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER
 		      | NETIF_F_LLTX;
 	dev->tx_timeout = &ehea_tx_watchdog;
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index 58b71e6..fe59c27 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -1057,6 +1057,7 @@
 #endif
 
 static struct of_device_id mpc52xx_fec_match[] = {
+	{ .type = "network", .compatible = "fsl,mpc5200b-fec", },
 	{ .type = "network", .compatible = "fsl,mpc5200-fec", },
 	{ .type = "network", .compatible = "mpc5200-fec", },
 	{ }
diff --git a/drivers/net/fec_mpc52xx_phy.c b/drivers/net/fec_mpc52xx_phy.c
index 6a3ac4e..1d0cd1d 100644
--- a/drivers/net/fec_mpc52xx_phy.c
+++ b/drivers/net/fec_mpc52xx_phy.c
@@ -179,6 +179,7 @@
 
 static struct of_device_id mpc52xx_fec_mdio_match[] = {
 	{ .compatible = "fsl,mpc5200b-mdio", },
+	{ .compatible = "fsl,mpc5200-mdio", },
 	{ .compatible = "mpc5200b-fec-phy", },
 	{}
 };
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 6f7e3fd..419f533 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -1854,6 +1854,7 @@
 	struct ring_desc* start_tx;
 	struct ring_desc* prev_tx;
 	struct nv_skb_map* prev_tx_ctx;
+	unsigned long flags;
 
 	/* add fragments to entries count */
 	for (i = 0; i < fragments; i++) {
@@ -1863,10 +1864,10 @@
 
 	empty_slots = nv_get_empty_tx_slots(np);
 	if (unlikely(empty_slots <= entries)) {
-		spin_lock_irq(&np->lock);
+		spin_lock_irqsave(&np->lock, flags);
 		netif_stop_queue(dev);
 		np->tx_stop = 1;
-		spin_unlock_irq(&np->lock);
+		spin_unlock_irqrestore(&np->lock, flags);
 		return NETDEV_TX_BUSY;
 	}
 
@@ -1929,13 +1930,13 @@
 		tx_flags_extra = skb->ip_summed == CHECKSUM_PARTIAL ?
 			 NV_TX2_CHECKSUM_L3 | NV_TX2_CHECKSUM_L4 : 0;
 
-	spin_lock_irq(&np->lock);
+	spin_lock_irqsave(&np->lock, flags);
 
 	/* set tx flags */
 	start_tx->flaglen |= cpu_to_le32(tx_flags | tx_flags_extra);
 	np->put_tx.orig = put_tx;
 
-	spin_unlock_irq(&np->lock);
+	spin_unlock_irqrestore(&np->lock, flags);
 
 	dprintk(KERN_DEBUG "%s: nv_start_xmit: entries %d queued for transmission. tx_flags_extra: %x\n",
 		dev->name, entries, tx_flags_extra);
@@ -1971,6 +1972,7 @@
 	struct ring_desc_ex* prev_tx;
 	struct nv_skb_map* prev_tx_ctx;
 	struct nv_skb_map* start_tx_ctx;
+	unsigned long flags;
 
 	/* add fragments to entries count */
 	for (i = 0; i < fragments; i++) {
@@ -1980,10 +1982,10 @@
 
 	empty_slots = nv_get_empty_tx_slots(np);
 	if (unlikely(empty_slots <= entries)) {
-		spin_lock_irq(&np->lock);
+		spin_lock_irqsave(&np->lock, flags);
 		netif_stop_queue(dev);
 		np->tx_stop = 1;
-		spin_unlock_irq(&np->lock);
+		spin_unlock_irqrestore(&np->lock, flags);
 		return NETDEV_TX_BUSY;
 	}
 
@@ -2059,7 +2061,7 @@
 			start_tx->txvlan = 0;
 	}
 
-	spin_lock_irq(&np->lock);
+	spin_lock_irqsave(&np->lock, flags);
 
 	if (np->tx_limit) {
 		/* Limit the number of outstanding tx. Setup all fragments, but
@@ -2085,7 +2087,7 @@
 	start_tx->flaglen |= cpu_to_le32(tx_flags | tx_flags_extra);
 	np->put_tx.ex = put_tx;
 
-	spin_unlock_irq(&np->lock);
+	spin_unlock_irqrestore(&np->lock, flags);
 
 	dprintk(KERN_DEBUG "%s: nv_start_xmit_optimized: entries %d queued for transmission. tx_flags_extra: %x\n",
 		dev->name, entries, tx_flags_extra);
@@ -2110,9 +2112,8 @@
 
 	np->tx_pkts_in_progress--;
 	if (np->tx_change_owner) {
-		__le32 flaglen = le32_to_cpu(np->tx_change_owner->first_tx_desc->flaglen);
-		flaglen |= NV_TX2_VALID;
-		np->tx_change_owner->first_tx_desc->flaglen = cpu_to_le32(flaglen);
+		np->tx_change_owner->first_tx_desc->flaglen |=
+			cpu_to_le32(NV_TX2_VALID);
 		np->tx_pkts_in_progress++;
 
 		np->tx_change_owner = np->tx_change_owner->next_tx_ctx;
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 0789802..378a239 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -1242,8 +1242,8 @@
 static inline u16 emac_tx_csum(struct emac_instance *dev,
 			       struct sk_buff *skb)
 {
-	if (emac_has_feature(dev, EMAC_FTR_HAS_TAH &&
-			     skb->ip_summed == CHECKSUM_PARTIAL)) {
+	if (emac_has_feature(dev, EMAC_FTR_HAS_TAH) &&
+		(skb->ip_summed == CHECKSUM_PARTIAL)) {
 		++dev->stats.tx_packets_csum;
 		return EMAC_TX_CTRL_TAH_CSUM;
 	}
diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h
index 6604d96..76ea846 100644
--- a/drivers/net/igb/e1000_82575.h
+++ b/drivers/net/igb/e1000_82575.h
@@ -61,28 +61,28 @@
 /* Receive Descriptor - Advanced */
 union e1000_adv_rx_desc {
 	struct {
-		u64 pkt_addr;             /* Packet buffer address */
-		u64 hdr_addr;             /* Header buffer address */
+		__le64 pkt_addr;             /* Packet buffer address */
+		__le64 hdr_addr;             /* Header buffer address */
 	} read;
 	struct {
 		struct {
 			struct {
-				u16 pkt_info;   /* RSS type, Packet type */
-				u16 hdr_info;   /* Split Header,
-						 * header buffer length */
+				__le16 pkt_info;   /* RSS type, Packet type */
+				__le16 hdr_info;   /* Split Header,
+						    * header buffer length */
 			} lo_dword;
 			union {
-				u32 rss;          /* RSS Hash */
+				__le32 rss;          /* RSS Hash */
 				struct {
-					u16 ip_id;    /* IP id */
-					u16 csum;     /* Packet Checksum */
+					__le16 ip_id;    /* IP id */
+					__le16 csum;     /* Packet Checksum */
 				} csum_ip;
 			} hi_dword;
 		} lower;
 		struct {
-			u32 status_error;     /* ext status/error */
-			u16 length;           /* Packet length */
-			u16 vlan;             /* VLAN tag */
+			__le32 status_error;     /* ext status/error */
+			__le16 length;           /* Packet length */
+			__le16 vlan;             /* VLAN tag */
 		} upper;
 	} wb;  /* writeback */
 };
@@ -97,14 +97,14 @@
 /* Transmit Descriptor - Advanced */
 union e1000_adv_tx_desc {
 	struct {
-		u64 buffer_addr;    /* Address of descriptor's data buf */
-		u32 cmd_type_len;
-		u32 olinfo_status;
+		__le64 buffer_addr;    /* Address of descriptor's data buf */
+		__le32 cmd_type_len;
+		__le32 olinfo_status;
 	} read;
 	struct {
-		u64 rsvd;       /* Reserved */
-		u32 nxtseq_seed;
-		u32 status;
+		__le64 rsvd;       /* Reserved */
+		__le32 nxtseq_seed;
+		__le32 status;
 	} wb;
 };
 
@@ -119,10 +119,10 @@
 
 /* Context descriptors */
 struct e1000_adv_tx_context_desc {
-	u32 vlan_macip_lens;
-	u32 seqnum_seed;
-	u32 type_tucmd_mlhl;
-	u32 mss_l4len_idx;
+	__le32 vlan_macip_lens;
+	__le32 seqnum_seed;
+	__le32 type_tucmd_mlhl;
+	__le32 mss_l4len_idx;
 };
 
 #define E1000_ADVTXD_MACLEN_SHIFT    9  /* Adv ctxt desc mac len shift */
diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h
index 161fb68..7b2c70a 100644
--- a/drivers/net/igb/e1000_hw.h
+++ b/drivers/net/igb/e1000_hw.h
@@ -143,35 +143,35 @@
 
 /* Receive Descriptor */
 struct e1000_rx_desc {
-	u64 buffer_addr; /* Address of the descriptor's data buffer */
-	u16 length;      /* Length of data DMAed into data buffer */
-	u16 csum;        /* Packet checksum */
+	__le64 buffer_addr; /* Address of the descriptor's data buffer */
+	__le16 length;      /* Length of data DMAed into data buffer */
+	__le16 csum;        /* Packet checksum */
 	u8  status;      /* Descriptor status */
 	u8  errors;      /* Descriptor Errors */
-	u16 special;
+	__le16 special;
 };
 
 /* Receive Descriptor - Extended */
 union e1000_rx_desc_extended {
 	struct {
-		u64 buffer_addr;
-		u64 reserved;
+		__le64 buffer_addr;
+		__le64 reserved;
 	} read;
 	struct {
 		struct {
-			u32 mrq;              /* Multiple Rx Queues */
+			__le32 mrq;              /* Multiple Rx Queues */
 			union {
-				u32 rss;            /* RSS Hash */
+				__le32 rss;            /* RSS Hash */
 				struct {
-					u16 ip_id;  /* IP id */
-					u16 csum;   /* Packet Checksum */
+					__le16 ip_id;  /* IP id */
+					__le16 csum;   /* Packet Checksum */
 				} csum_ip;
 			} hi_dword;
 		} lower;
 		struct {
-			u32 status_error;     /* ext status/error */
-			u16 length;
-			u16 vlan;             /* VLAN tag */
+			__le32 status_error;     /* ext status/error */
+			__le16 length;
+			__le16 vlan;             /* VLAN tag */
 		} upper;
 	} wb;  /* writeback */
 };
@@ -181,49 +181,49 @@
 union e1000_rx_desc_packet_split {
 	struct {
 		/* one buffer for protocol header(s), three data buffers */
-		u64 buffer_addr[MAX_PS_BUFFERS];
+		__le64 buffer_addr[MAX_PS_BUFFERS];
 	} read;
 	struct {
 		struct {
-			u32 mrq;              /* Multiple Rx Queues */
+			__le32 mrq;              /* Multiple Rx Queues */
 			union {
-				u32 rss;              /* RSS Hash */
+				__le32 rss;              /* RSS Hash */
 				struct {
-					u16 ip_id;    /* IP id */
-					u16 csum;     /* Packet Checksum */
+					__le16 ip_id;    /* IP id */
+					__le16 csum;     /* Packet Checksum */
 				} csum_ip;
 			} hi_dword;
 		} lower;
 		struct {
-			u32 status_error;     /* ext status/error */
-			u16 length0;          /* length of buffer 0 */
-			u16 vlan;             /* VLAN tag */
+			__le32 status_error;     /* ext status/error */
+			__le16 length0;          /* length of buffer 0 */
+			__le16 vlan;             /* VLAN tag */
 		} middle;
 		struct {
-			u16 header_status;
-			u16 length[3];        /* length of buffers 1-3 */
+			__le16 header_status;
+			__le16 length[3];        /* length of buffers 1-3 */
 		} upper;
-		u64 reserved;
+		__le64 reserved;
 	} wb; /* writeback */
 };
 
 /* Transmit Descriptor */
 struct e1000_tx_desc {
-	u64 buffer_addr;      /* Address of the descriptor's data buffer */
+	__le64 buffer_addr;      /* Address of the descriptor's data buffer */
 	union {
-		u32 data;
+		__le32 data;
 		struct {
-			u16 length;    /* Data buffer length */
+			__le16 length;    /* Data buffer length */
 			u8 cso;        /* Checksum offset */
 			u8 cmd;        /* Descriptor control */
 		} flags;
 	} lower;
 	union {
-		u32 data;
+		__le32 data;
 		struct {
 			u8 status;     /* Descriptor status */
 			u8 css;        /* Checksum start */
-			u16 special;
+			__le16 special;
 		} fields;
 	} upper;
 };
@@ -231,49 +231,49 @@
 /* Offload Context Descriptor */
 struct e1000_context_desc {
 	union {
-		u32 ip_config;
+		__le32 ip_config;
 		struct {
 			u8 ipcss;      /* IP checksum start */
 			u8 ipcso;      /* IP checksum offset */
-			u16 ipcse;     /* IP checksum end */
+			__le16 ipcse;     /* IP checksum end */
 		} ip_fields;
 	} lower_setup;
 	union {
-		u32 tcp_config;
+		__le32 tcp_config;
 		struct {
 			u8 tucss;      /* TCP checksum start */
 			u8 tucso;      /* TCP checksum offset */
-			u16 tucse;     /* TCP checksum end */
+			__le16 tucse;     /* TCP checksum end */
 		} tcp_fields;
 	} upper_setup;
-	u32 cmd_and_length;
+	__le32 cmd_and_length;
 	union {
-		u32 data;
+		__le32 data;
 		struct {
 			u8 status;     /* Descriptor status */
 			u8 hdr_len;    /* Header length */
-			u16 mss;       /* Maximum segment size */
+			__le16 mss;       /* Maximum segment size */
 		} fields;
 	} tcp_seg_setup;
 };
 
 /* Offload data descriptor */
 struct e1000_data_desc {
-	u64 buffer_addr;   /* Address of the descriptor's buffer address */
+	__le64 buffer_addr;   /* Address of the descriptor's buffer address */
 	union {
-		u32 data;
+		__le32 data;
 		struct {
-			u16 length;    /* Data buffer length */
+			__le16 length;    /* Data buffer length */
 			u8 typ_len_ext;
 			u8 cmd;
 		} flags;
 	} lower;
 	union {
-		u32 data;
+		__le32 data;
 		struct {
 			u8 status;     /* Descriptor status */
 			u8 popts;      /* Packet Options */
-			u16 special;
+			__le16 special;
 		} fields;
 	} upper;
 };
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 928ce82..aaee02e 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -3254,6 +3254,13 @@
 
 	return 1;
 }
+
+static inline u32 get_head(struct igb_ring *tx_ring)
+{
+	void *end = (struct e1000_tx_desc *)tx_ring->desc + tx_ring->count;
+	return le32_to_cpu(*(volatile __le32 *)end);
+}
+
 /**
  * igb_clean_tx_irq - Reclaim resources after transmit completes
  * @adapter: board private structure
@@ -3275,9 +3282,7 @@
 	unsigned int total_bytes = 0, total_packets = 0;
 
 	rmb();
-	head = *(volatile u32 *)((struct e1000_tx_desc *)tx_ring->desc
-				 + tx_ring->count);
-	head = le32_to_cpu(head);
+	head = get_head(tx_ring);
 	i = tx_ring->next_to_clean;
 	while (1) {
 		while (i != head) {
@@ -3312,9 +3317,7 @@
 		}
 		oldhead = head;
 		rmb();
-		head = *(volatile u32 *)((struct e1000_tx_desc *)tx_ring->desc
-					 + tx_ring->count);
-		head = le32_to_cpu(head);
+		head = get_head(tx_ring);
 		if (head == oldhead)
 			goto done_cleaning;
 	}  /* while (1) */
@@ -3388,7 +3391,7 @@
  * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
  * @skb: pointer to sk_buff to be indicated to stack
  **/
-static void igb_receive_skb(struct igb_adapter *adapter, u8 status, u16 vlan,
+static void igb_receive_skb(struct igb_adapter *adapter, u8 status, __le16 vlan,
 			    struct sk_buff *skb)
 {
 	if (adapter->vlgrp && (status & E1000_RXD_STAT_VP))
@@ -3452,8 +3455,8 @@
 		 * that case, it fills the header buffer and spills the rest
 		 * into the page.
 		 */
-		hlen = le16_to_cpu((rx_desc->wb.lower.lo_dword.hdr_info &
-		  E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT);
+		hlen = (le16_to_cpu(rx_desc->wb.lower.lo_dword.hdr_info) &
+		  E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT;
 		if (hlen > adapter->rx_ps_hdr_size)
 			hlen = adapter->rx_ps_hdr_size;
 
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index 269e6f8..6738b4d 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -2088,14 +2088,12 @@
 	struct ixgb_buffer *buffer_info;
 	struct sk_buff *skb;
 	unsigned int i;
-	int num_group_tail_writes;
 	long cleancount;
 
 	i = rx_ring->next_to_use;
 	buffer_info = &rx_ring->buffer_info[i];
 	cleancount = IXGB_DESC_UNUSED(rx_ring);
 
-	num_group_tail_writes = IXGB_RX_BUFFER_WRITE;
 
 	/* leave three descriptors unused */
 	while(--cleancount > 2) {
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 2bc5eaae..7f20a03 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -85,7 +85,7 @@
 	(sizeof(struct netxen_cmd_buffer) * adapter->max_tx_desc_count)
 #define RCV_BUFFSIZE	\
 	(sizeof(struct netxen_rx_buffer) * rcv_desc->max_rx_desc_count)
-#define find_diff_among(a,b,range) ((a)<=(b)?((b)-(a)):((b)+(range)-(a)))
+#define find_diff_among(a,b,range) ((a)<(b)?((b)-(a)):((b)+(range)-(a)))
 
 #define NETXEN_NETDEV_STATUS		0x1
 #define NETXEN_RCV_PRODUCER_OFFSET	0
@@ -204,7 +204,7 @@
 			? RCV_DESC_LRO :	\
 			(RCV_DESC_NORMAL)))
 
-#define MAX_CMD_DESCRIPTORS		1024
+#define MAX_CMD_DESCRIPTORS		4096
 #define MAX_RCV_DESCRIPTORS		16384
 #define MAX_CMD_DESCRIPTORS_HOST	(MAX_CMD_DESCRIPTORS / 4)
 #define MAX_RCV_DESCRIPTORS_1G		(MAX_RCV_DESCRIPTORS / 4)
@@ -818,15 +818,8 @@
 	u64  badskblen;
 	u64  nocmddescriptor;
 	u64  polled;
-	u64  uphappy;
-	u64  updropped;
-	u64  uplcong;
-	u64  uphcong;
-	u64  upmcong;
-	u64  updunno;
-	u64  skbfreed;
+	u64  rxdropped;
 	u64  txdropped;
-	u64  txnullskb;
 	u64  csummed;
 	u64  no_rcv;
 	u64  rxbytes;
@@ -842,7 +835,6 @@
 	u32 flags;
 	u32 producer;
 	u32 rcv_pending;	/* Num of bufs posted in phantom */
-	u32 rcv_free;		/* Num of bufs in free list */
 	dma_addr_t phys_addr;
 	struct pci_dev *phys_pdev;
 	struct rcv_desc *desc_head;	/* address of rx ring in Phantom */
@@ -889,8 +881,6 @@
 	int mtu;
 	int portnum;
 
-	spinlock_t tx_lock;
-	spinlock_t lock;
 	struct work_struct watchdog_task;
 	struct timer_list watchdog_timer;
 	struct work_struct  tx_timeout_task;
@@ -899,16 +889,12 @@
 
 	u32 cmd_producer;
 	__le32 *cmd_consumer;
-
 	u32 last_cmd_consumer;
+
 	u32 max_tx_desc_count;
 	u32 max_rx_desc_count;
 	u32 max_jumbo_rx_desc_count;
 	u32 max_lro_rx_desc_count;
-	/* Num of instances active on cmd buffer ring */
-	u32 proc_cmd_buf_counter;
-
-	u32 num_threads, total_threads;	/*Use to keep track of xmit threads */
 
 	u32 flags;
 	u32 irq;
@@ -942,6 +928,7 @@
 	struct pci_dev *ctx_desc_pdev;
 	dma_addr_t ctx_desc_phys_addr;
 	int intr_scheme;
+	int msi_mode;
 	int (*enable_phy_interrupts) (struct netxen_adapter *);
 	int (*disable_phy_interrupts) (struct netxen_adapter *);
 	void (*handle_phy_intr) (struct netxen_adapter *);
@@ -1075,12 +1062,10 @@
 		      struct cmd_desc_type0 *desc, struct sk_buff *skb);
 int netxen_nic_hw_resources(struct netxen_adapter *adapter);
 void netxen_nic_clear_stats(struct netxen_adapter *adapter);
-int netxen_nic_rx_has_work(struct netxen_adapter *adapter);
-int netxen_nic_tx_has_work(struct netxen_adapter *adapter);
 void netxen_watchdog_task(struct work_struct *work);
 void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx,
 			    u32 ringid);
-int netxen_process_cmd_ring(unsigned long data);
+int netxen_process_cmd_ring(struct netxen_adapter *adapter);
 u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctx, int max);
 void netxen_nic_set_multi(struct net_device *netdev);
 int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu);
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index 7a876f4..6e98d83 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -64,15 +64,7 @@
 	{"bad_skb_len", NETXEN_NIC_STAT(stats.badskblen)},
 	{"no_cmd_desc", NETXEN_NIC_STAT(stats.nocmddescriptor)},
 	{"polled", NETXEN_NIC_STAT(stats.polled)},
-	{"uphappy", NETXEN_NIC_STAT(stats.uphappy)},
-	{"updropped", NETXEN_NIC_STAT(stats.updropped)},
-	{"uplcong", NETXEN_NIC_STAT(stats.uplcong)},
-	{"uphcong", NETXEN_NIC_STAT(stats.uphcong)},
-	{"upmcong", NETXEN_NIC_STAT(stats.upmcong)},
-	{"updunno", NETXEN_NIC_STAT(stats.updunno)},
-	{"skb_freed", NETXEN_NIC_STAT(stats.skbfreed)},
 	{"tx_dropped", NETXEN_NIC_STAT(stats.txdropped)},
-	{"tx_null_skb", NETXEN_NIC_STAT(stats.txnullskb)},
 	{"csummed", NETXEN_NIC_STAT(stats.csummed)},
 	{"no_rcv", NETXEN_NIC_STAT(stats.no_rcv)},
 	{"rx_bytes", NETXEN_NIC_STAT(stats.rxbytes)},
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index d72f8f8..160f605 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -456,6 +456,12 @@
 #define ISR_INT_MASK_SLOW	(NETXEN_PCIX_PS_REG(PCIX_INT_MASK))
 #define ISR_INT_TARGET_STATUS	(NETXEN_PCIX_PS_REG(PCIX_TARGET_STATUS))
 #define ISR_INT_TARGET_MASK	(NETXEN_PCIX_PS_REG(PCIX_TARGET_MASK))
+#define ISR_INT_TARGET_STATUS_F1   (NETXEN_PCIX_PS_REG(PCIX_TARGET_STATUS_F1))
+#define ISR_INT_TARGET_MASK_F1     (NETXEN_PCIX_PS_REG(PCIX_TARGET_MASK_F1))
+#define ISR_INT_TARGET_STATUS_F2   (NETXEN_PCIX_PS_REG(PCIX_TARGET_STATUS_F2))
+#define ISR_INT_TARGET_MASK_F2     (NETXEN_PCIX_PS_REG(PCIX_TARGET_MASK_F2))
+#define ISR_INT_TARGET_STATUS_F3   (NETXEN_PCIX_PS_REG(PCIX_TARGET_STATUS_F3))
+#define ISR_INT_TARGET_MASK_F3     (NETXEN_PCIX_PS_REG(PCIX_TARGET_MASK_F3))
 
 #define NETXEN_PCI_MAPSIZE	128
 #define NETXEN_PCI_DDR_NET	(0x00000000UL)
@@ -662,6 +668,12 @@
 
 #define PCIX_TARGET_STATUS	(0x10118)
 #define PCIX_TARGET_MASK	(0x10128)
+#define PCIX_TARGET_STATUS_F1 (0x10160)
+#define PCIX_TARGET_MASK_F1   (0x10170)
+#define PCIX_TARGET_STATUS_F2 (0x10164)
+#define PCIX_TARGET_MASK_F2   (0x10174)
+#define PCIX_TARGET_STATUS_F3 (0x10168)
+#define PCIX_TARGET_MASK_F3   (0x10178)
 
 #define PCIX_MSI_F0		(0x13000)
 #define PCIX_MSI_F1		(0x13004)
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 0135570..05748ca 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -398,6 +398,8 @@
 		NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_CAPABILITIES_FW));
 	printk(KERN_NOTICE "%s: FW capabilities:0x%x\n", netxen_nic_driver_name,
 			adapter->intr_scheme);
+	adapter->msi_mode = readl(
+		NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_MSI_MODE_FW));
 	DPRINTK(INFO, "Receive Peg ready too. starting stuff\n");
 
 	addr = netxen_alloc(adapter->ahw.pdev,
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 9e38bcb..45fa33e 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -145,6 +145,8 @@
 	/* Window 1 call */
 	writel(INTR_SCHEME_PERPORT,
 	       NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_CAPABILITIES_HOST));
+	writel(MSI_MODE_MULTIFUNC,
+	       NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_MSI_MODE_HOST));
 	writel(MPORT_MULTI_FUNCTION_MODE,
 	       NETXEN_CRB_NORMALIZE(adapter, CRB_MPORT_MODE));
 	writel(PHAN_INITIALIZE_ACK,
@@ -183,7 +185,6 @@
 		for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) {
 			struct netxen_rx_buffer *rx_buf;
 			rcv_desc = &adapter->recv_ctx[ctxid].rcv_desc[ring];
-			rcv_desc->rcv_free = rcv_desc->max_rx_desc_count;
 			rcv_desc->begin_alloc = 0;
 			rx_buf = rcv_desc->rx_buf_arr;
 			num_rx_bufs = rcv_desc->max_rx_desc_count;
@@ -974,28 +975,6 @@
 	return 0;
 }
 
-int netxen_nic_rx_has_work(struct netxen_adapter *adapter)
-{
-	int ctx;
-
-	for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) {
-		struct netxen_recv_context *recv_ctx =
-		    &(adapter->recv_ctx[ctx]);
-		u32 consumer;
-		struct status_desc *desc_head;
-		struct status_desc *desc;
-
-		consumer = recv_ctx->status_rx_consumer;
-		desc_head = recv_ctx->rcv_status_desc_head;
-		desc = &desc_head[consumer];
-
-		if (netxen_get_sts_owner(desc) & STATUS_OWNER_HOST)
-			return 1;
-	}
-
-	return 0;
-}
-
 static int netxen_nic_check_temp(struct netxen_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
@@ -1038,7 +1017,6 @@
 
 void netxen_watchdog_task(struct work_struct *work)
 {
-	struct net_device *netdev;
 	struct netxen_adapter *adapter =
 		container_of(work, struct netxen_adapter, watchdog_task);
 
@@ -1048,20 +1026,6 @@
 	if (adapter->handle_phy_intr)
 		adapter->handle_phy_intr(adapter);
 
-	netdev = adapter->netdev;
-	if ((netif_running(netdev)) && !netif_carrier_ok(netdev) &&
-			netxen_nic_link_ok(adapter) ) {
-		printk(KERN_INFO "%s %s (port %d), Link is up\n",
-			       netxen_nic_driver_name, netdev->name, adapter->portnum);
-		netif_carrier_on(netdev);
-		netif_wake_queue(netdev);
-	} else if(!(netif_running(netdev)) && netif_carrier_ok(netdev)) {
-		printk(KERN_ERR "%s %s Link is Down\n",
-				netxen_nic_driver_name, netdev->name);
-		netif_carrier_off(netdev);
-		netif_stop_queue(netdev);
-	}
-
 	mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
 }
 
@@ -1125,7 +1089,7 @@
 	skb = (struct sk_buff *)buffer->skb;
 
 	if (likely(adapter->rx_csum &&
-				netxen_get_sts_status(sts_data) == STATUS_CKSUM_OK)) {
+			netxen_get_sts_status(sts_data) == STATUS_CKSUM_OK)) {
 		adapter->stats.csummed++;
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 	} else
@@ -1142,40 +1106,8 @@
 	skb->protocol = eth_type_trans(skb, netdev);
 
 	ret = netif_receive_skb(skb);
-
-	/*
-	 * RH: Do we need these stats on a regular basis. Can we get it from
-	 * Linux stats.
-	 */
-	switch (ret) {
-	case NET_RX_SUCCESS:
-		adapter->stats.uphappy++;
-		break;
-
-	case NET_RX_CN_LOW:
-		adapter->stats.uplcong++;
-		break;
-
-	case NET_RX_CN_MOD:
-		adapter->stats.upmcong++;
-		break;
-
-	case NET_RX_CN_HIGH:
-		adapter->stats.uphcong++;
-		break;
-
-	case NET_RX_DROP:
-		adapter->stats.updropped++;
-		break;
-
-	default:
-		adapter->stats.updunno++;
-		break;
-	}
-
 	netdev->last_rx = jiffies;
 
-	rcv_desc->rcv_free++;
 	rcv_desc->rcv_pending--;
 
 	/*
@@ -1200,13 +1132,6 @@
 	u32 producer = 0;
 	int count = 0, ring;
 
-	DPRINTK(INFO, "procesing receive\n");
-	/*
-	 * we assume in this case that there is only one port and that is
-	 * port #1...changes need to be done in firmware to indicate port
-	 * number as part of the descriptor. This way we will be able to get
-	 * the netdev which is associated with that device.
-	 */
 	while (count < max) {
 		desc = &desc_head[consumer];
 		if (!(netxen_get_sts_owner(desc) & STATUS_OWNER_HOST)) {
@@ -1219,11 +1144,8 @@
 		consumer = (consumer + 1) & (adapter->max_rx_desc_count - 1);
 		count++;
 	}
-	if (count) {
-		for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) {
-			netxen_post_rx_buffers_nodb(adapter, ctxid, ring);
-		}
-	}
+	for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++)
+		netxen_post_rx_buffers_nodb(adapter, ctxid, ring);
 
 	/* update the consumer index in phantom */
 	if (count) {
@@ -1233,108 +1155,60 @@
 		/* Window = 1 */
 		writel(consumer,
 		       NETXEN_CRB_NORMALIZE(adapter,
-					    recv_crb_registers[adapter->portnum].
+				    recv_crb_registers[adapter->portnum].
 					    crb_rcv_status_consumer));
-		wmb();
 	}
 
 	return count;
 }
 
 /* Process Command status ring */
-int netxen_process_cmd_ring(unsigned long data)
+int netxen_process_cmd_ring(struct netxen_adapter *adapter)
 {
-	u32 last_consumer;
-	u32 consumer;
-	struct netxen_adapter *adapter = (struct netxen_adapter *)data;
-	int count1 = 0;
-	int count2 = 0;
+	u32 last_consumer, consumer;
+	int count = 0, i;
 	struct netxen_cmd_buffer *buffer;
-	struct pci_dev *pdev;
+	struct pci_dev *pdev = adapter->pdev;
+	struct net_device *netdev = adapter->netdev;
 	struct netxen_skb_frag *frag;
-	u32 i;
-	int done;
+	int done = 0;
 
-	spin_lock(&adapter->tx_lock);
 	last_consumer = adapter->last_cmd_consumer;
-	DPRINTK(INFO, "procesing xmit complete\n");
-	/* we assume in this case that there is only one port and that is
-	 * port #1...changes need to be done in firmware to indicate port
-	 * number as part of the descriptor. This way we will be able to get
-	 * the netdev which is associated with that device.
-	 */
-
 	consumer = le32_to_cpu(*(adapter->cmd_consumer));
-	if (last_consumer == consumer) {	/* Ring is empty    */
-		DPRINTK(INFO, "last_consumer %d == consumer %d\n",
-			last_consumer, consumer);
-		spin_unlock(&adapter->tx_lock);
-		return 1;
-	}
 
-	adapter->proc_cmd_buf_counter++;
-	/*
-	 * Not needed - does not seem to be used anywhere.
-	 * adapter->cmd_consumer = consumer;
-	 */
-	spin_unlock(&adapter->tx_lock);
-
-	while ((last_consumer != consumer) && (count1 < MAX_STATUS_HANDLE)) {
+	while (last_consumer != consumer) {
 		buffer = &adapter->cmd_buf_arr[last_consumer];
-		pdev = adapter->pdev;
 		if (buffer->skb) {
 			frag = &buffer->frag_array[0];
 			pci_unmap_single(pdev, frag->dma, frag->length,
 					 PCI_DMA_TODEVICE);
 			frag->dma = 0ULL;
 			for (i = 1; i < buffer->frag_count; i++) {
-				DPRINTK(INFO, "getting fragment no %d\n", i);
 				frag++;	/* Get the next frag */
 				pci_unmap_page(pdev, frag->dma, frag->length,
 					       PCI_DMA_TODEVICE);
 				frag->dma = 0ULL;
 			}
 
-			adapter->stats.skbfreed++;
+			adapter->stats.xmitfinished++;
 			dev_kfree_skb_any(buffer->skb);
 			buffer->skb = NULL;
-		} else if (adapter->proc_cmd_buf_counter == 1) {
-			adapter->stats.txnullskb++;
-		}
-		if (unlikely(netif_queue_stopped(adapter->netdev)
-			     && netif_carrier_ok(adapter->netdev))
-		    && ((jiffies - adapter->netdev->trans_start) >
-			adapter->netdev->watchdog_timeo)) {
-			SCHEDULE_WORK(&adapter->tx_timeout_task);
 		}
 
 		last_consumer = get_next_index(last_consumer,
 					       adapter->max_tx_desc_count);
-		count1++;
+		if (++count >= MAX_STATUS_HANDLE)
+			break;
 	}
 
-	count2 = 0;
-	spin_lock(&adapter->tx_lock);
-	if ((--adapter->proc_cmd_buf_counter) == 0) {
+	if (count) {
 		adapter->last_cmd_consumer = last_consumer;
-		while ((adapter->last_cmd_consumer != consumer)
-		       && (count2 < MAX_STATUS_HANDLE)) {
-			buffer =
-			    &adapter->cmd_buf_arr[adapter->last_cmd_consumer];
-			count2++;
-			if (buffer->skb)
-				break;
-			else
-				adapter->last_cmd_consumer =
-				    get_next_index(adapter->last_cmd_consumer,
-						   adapter->max_tx_desc_count);
-		}
-	}
-	if (count1 || count2) {
-		if (netif_queue_stopped(adapter->netdev)
-		    && (adapter->flags & NETXEN_NETDEV_STATUS)) {
-			netif_wake_queue(adapter->netdev);
-			adapter->flags &= ~NETXEN_NETDEV_STATUS;
+		smp_mb();
+		if (netif_queue_stopped(netdev) && netif_running(netdev)) {
+			netif_tx_lock(netdev);
+			netif_wake_queue(netdev);
+			smp_mb();
+			netif_tx_unlock(netdev);
 		}
 	}
 	/*
@@ -1350,16 +1224,9 @@
 	 * There is still a possible race condition and the host could miss an
 	 * interrupt. The card has to take care of this.
 	 */
-	if (adapter->last_cmd_consumer == consumer &&
-	    (((adapter->cmd_producer + 1) %
-	      adapter->max_tx_desc_count) == adapter->last_cmd_consumer)) {
-		consumer = le32_to_cpu(*(adapter->cmd_consumer));
-	}
-	done = (adapter->last_cmd_consumer == consumer);
+	consumer = le32_to_cpu(*(adapter->cmd_consumer));
+	done = (last_consumer == consumer);
 
-	spin_unlock(&adapter->tx_lock);
-	DPRINTK(INFO, "last consumer is %d in %s\n", last_consumer,
-		__FUNCTION__);
 	return (done);
 }
 
@@ -1433,8 +1300,6 @@
 		rcv_desc->begin_alloc = index;
 		rcv_desc->rcv_pending += count;
 		rcv_desc->producer = producer;
-		if (rcv_desc->rcv_free >= 32) {
-			rcv_desc->rcv_free = 0;
 			/* Window = 1 */
 			writel((producer - 1) &
 			       (rcv_desc->max_rx_desc_count - 1),
@@ -1458,8 +1323,6 @@
 			writel(msg,
 			       DB_NORMALIZE(adapter,
 					    NETXEN_RCV_PRODUCER_OFFSET));
-			wmb();
-		}
 	}
 }
 
@@ -1523,8 +1386,6 @@
 		rcv_desc->begin_alloc = index;
 		rcv_desc->rcv_pending += count;
 		rcv_desc->producer = producer;
-		if (rcv_desc->rcv_free >= 32) {
-			rcv_desc->rcv_free = 0;
 			/* Window = 1 */
 			writel((producer - 1) &
 			       (rcv_desc->max_rx_desc_count - 1),
@@ -1534,21 +1395,9 @@
 						    rcv_desc_crb[ringid].
 						    crb_rcv_producer_offset));
 			wmb();
-		}
 	}
 }
 
-int netxen_nic_tx_has_work(struct netxen_adapter *adapter)
-{
-	if (find_diff_among(adapter->last_cmd_consumer,
-			    adapter->cmd_producer,
-			    adapter->max_tx_desc_count) > 0)
-		return 1;
-
-	return 0;
-}
-
-
 void netxen_nic_clear_stats(struct netxen_adapter *adapter)
 {
 	memset(&adapter->stats, 0, sizeof(adapter->stats));
diff --git a/drivers/net/netxen/netxen_nic_isr.c b/drivers/net/netxen/netxen_nic_isr.c
index 48a404a..c81313b 100644
--- a/drivers/net/netxen/netxen_nic_isr.c
+++ b/drivers/net/netxen/netxen_nic_isr.c
@@ -59,7 +59,7 @@
 	/* packet transmit problems */
 	stats->tx_errors = adapter->stats.nocmddescriptor;
 	/* no space in linux buffers    */
-	stats->rx_dropped = adapter->stats.updropped;
+	stats->rx_dropped = adapter->stats.rxdropped;
 	/* no space available in linux  */
 	stats->tx_dropped = adapter->stats.txdropped;
 
@@ -193,14 +193,14 @@
 void netxen_nic_xgbe_handle_phy_intr(struct netxen_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
-	u32 val, val1;
+	u32 val;
 
 	/* WINDOW = 1 */
 	val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_XG_STATE));
 	val >>= (physical_port[adapter->portnum] * 8);
-	val1 = val & 0xff;
+	val &= 0xff;
 
-	if (adapter->ahw.xg_linkup == 1 && val1 != XG_LINK_UP) {
+	if (adapter->ahw.xg_linkup == 1 && val != XG_LINK_UP) {
 		printk(KERN_INFO "%s: %s NIC Link is down\n",
 		       netxen_nic_driver_name, netdev->name);
 		adapter->ahw.xg_linkup = 0;
@@ -208,16 +208,7 @@
 			netif_carrier_off(netdev);
 			netif_stop_queue(netdev);
 		}
-		/* read twice to clear sticky bits */
-		/* WINDOW = 0 */
-		netxen_nic_read_w0(adapter, NETXEN_NIU_XG_STATUS, &val1);
-		netxen_nic_read_w0(adapter, NETXEN_NIU_XG_STATUS, &val1);
-
-		if ((val & 0xffb) != 0xffb) {
-			printk(KERN_INFO "%s ISR: Sync/Align BAD: 0x%08x\n",
-			       netxen_nic_driver_name, val1);
-		}
-	} else if (adapter->ahw.xg_linkup == 0 && val1 == XG_LINK_UP) {
+	} else if (adapter->ahw.xg_linkup == 0 && val == XG_LINK_UP) {
 		printk(KERN_INFO "%s: %s NIC Link is up\n",
 		       netxen_nic_driver_name, netdev->name);
 		adapter->ahw.xg_linkup = 1;
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 9737eae..a8fb439 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -63,12 +63,12 @@
 static void netxen_tx_timeout(struct net_device *netdev);
 static void netxen_tx_timeout_task(struct work_struct *work);
 static void netxen_watchdog(unsigned long);
-static int netxen_handle_int(struct netxen_adapter *, struct net_device *);
 static int netxen_nic_poll(struct napi_struct *napi, int budget);
 #ifdef CONFIG_NET_POLL_CONTROLLER
 static void netxen_nic_poll_controller(struct net_device *netdev);
 #endif
 static irqreturn_t netxen_intr(int irq, void *data);
+static irqreturn_t netxen_msi_intr(int irq, void *data);
 
 int physical_port[] = {0, 1, 2, 3};
 
@@ -149,33 +149,30 @@
 
 #define	ADAPTER_LIST_SIZE 12
 
+static uint32_t msi_tgt_status[4] = {
+	ISR_INT_TARGET_STATUS, ISR_INT_TARGET_STATUS_F1,
+	ISR_INT_TARGET_STATUS_F2, ISR_INT_TARGET_STATUS_F3
+};
+
+static uint32_t sw_int_mask[4] = {
+	CRB_SW_INT_MASK_0, CRB_SW_INT_MASK_1,
+	CRB_SW_INT_MASK_2, CRB_SW_INT_MASK_3
+};
+
 static void netxen_nic_disable_int(struct netxen_adapter *adapter)
 {
-	uint32_t	mask = 0x7ff;
+	u32 mask = 0x7ff;
 	int retries = 32;
+	int port = adapter->portnum;
+	int pci_fn = adapter->ahw.pci_func;
 
-	DPRINTK(1, INFO, "Entered ISR Disable \n");
-
-	switch (adapter->portnum) {
-	case 0:
-		writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
-		break;
-	case 1:
-		writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
-		break;
-	case 2:
-		writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
-		break;
-	case 3:
-		writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
-		break;
-	}
+	if (adapter->msi_mode != MSI_MODE_MULTIFUNC)
+		writel(0x0, NETXEN_CRB_NORMALIZE(adapter, sw_int_mask[port]));
 
 	if (adapter->intr_scheme != -1 &&
 	    adapter->intr_scheme != INTR_SCHEME_PERPORT)
 		writel(mask,PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK));
 
-	/* Window = 0 or 1 */
 	if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
 		do {
 			writel(0xffffffff,
@@ -190,14 +187,18 @@
 			printk(KERN_NOTICE "%s: Failed to disable interrupt completely\n",
 					netxen_nic_driver_name);
 		}
+	} else {
+		if (adapter->msi_mode == MSI_MODE_MULTIFUNC) {
+			writel(0xffffffff, PCI_OFFSET_SECOND_RANGE(adapter,
+						msi_tgt_status[pci_fn]));
+		}
 	}
-
-	DPRINTK(1, INFO, "Done with Disable Int\n");
 }
 
 static void netxen_nic_enable_int(struct netxen_adapter *adapter)
 {
 	u32 mask;
+	int port = adapter->portnum;
 
 	DPRINTK(1, INFO, "Entered ISR Enable \n");
 
@@ -218,20 +219,7 @@
 		writel(mask, PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK));
 	}
 
-	switch (adapter->portnum) {
-	case 0:
-		writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
-		break;
-	case 1:
-		writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
-		break;
-	case 2:
-		writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
-		break;
-	case 3:
-		writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
-		break;
-	}
+	writel(0x1, NETXEN_CRB_NORMALIZE(adapter, sw_int_mask[port]));
 
 	if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
 		mask = 0xbff;
@@ -328,7 +316,6 @@
 
 	adapter->ahw.pdev = pdev;
 	adapter->ahw.pci_func  = pci_func_id;
-	spin_lock_init(&adapter->tx_lock);
 
 	/* remap phys address */
 	mem_base = pci_resource_start(pdev, 0);	/* 0 is for BAR 0 */
@@ -401,6 +388,7 @@
 
 	/* this will be read from FW later */
 	adapter->intr_scheme = -1;
+	adapter->msi_mode = -1;
 
 	/* This will be reset for mezz cards  */
 	adapter->portnum = pci_func_id;
@@ -415,7 +403,7 @@
 	netdev->set_mac_address    = netxen_nic_set_mac;
 	netdev->change_mtu	   = netxen_nic_change_mtu;
 	netdev->tx_timeout	   = netxen_tx_timeout;
-	netdev->watchdog_timeo     = HZ;
+	netdev->watchdog_timeo     = 2*HZ;
 
 	netxen_nic_change_mtu(netdev, netdev->mtu);
 
@@ -543,7 +531,6 @@
 	adapter->watchdog_timer.data = (unsigned long)adapter;
 	INIT_WORK(&adapter->watchdog_task, netxen_watchdog_task);
 	adapter->ahw.pdev = pdev;
-	adapter->proc_cmd_buf_counter = 0;
 	adapter->ahw.revision_id = pdev->revision;
 
 	/* make sure Window == 1 */
@@ -833,6 +820,8 @@
 	struct netxen_adapter *adapter = (struct netxen_adapter *)netdev->priv;
 	int err = 0;
 	int ctx, ring;
+	irq_handler_t handler;
+	unsigned long flags = IRQF_SAMPLE_RANDOM;
 
 	if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC) {
 		err = netxen_init_firmware(adapter);
@@ -856,9 +845,14 @@
 				netxen_post_rx_buffers(adapter, ctx, ring);
 		}
 		adapter->irq = adapter->ahw.pdev->irq;
-		err = request_irq(adapter->ahw.pdev->irq, netxen_intr,
-				  IRQF_SHARED|IRQF_SAMPLE_RANDOM, netdev->name,
-				  adapter);
+		if (adapter->flags & NETXEN_NIC_MSI_ENABLED)
+			handler = netxen_msi_intr;
+		else {
+			flags |= IRQF_SHARED;
+			handler = netxen_intr;
+		}
+		err = request_irq(adapter->irq, handler,
+				  flags, netdev->name, adapter);
 		if (err) {
 			printk(KERN_ERR "request_irq failed with: %d\n", err);
 			netxen_free_hw_resources(adapter);
@@ -867,21 +861,12 @@
 
 		adapter->is_up = NETXEN_ADAPTER_UP_MAGIC;
 	}
-	if (!adapter->driver_mismatch)
-		mod_timer(&adapter->watchdog_timer, jiffies);
-
-	napi_enable(&adapter->napi);
-
-	netxen_nic_enable_int(adapter);
-
 	/* Done here again so that even if phantom sw overwrote it,
 	 * we set it */
 	if (adapter->init_port
 	    && adapter->init_port(adapter, adapter->portnum) != 0) {
-	    del_timer_sync(&adapter->watchdog_timer);
 		printk(KERN_ERR "%s: Failed to initialize port %d\n",
 				netxen_nic_driver_name, adapter->portnum);
-		napi_disable(&adapter->napi);
 		return -EIO;
 	}
 	if (adapter->macaddr_set)
@@ -894,6 +879,12 @@
 		adapter->set_mtu(adapter, netdev->mtu);
 
 	if (!adapter->driver_mismatch)
+		mod_timer(&adapter->watchdog_timer, jiffies);
+
+	napi_enable(&adapter->napi);
+	netxen_nic_enable_int(adapter);
+
+	if (!adapter->driver_mismatch)
 		netif_start_queue(netdev);
 
 	return 0;
@@ -958,41 +949,17 @@
 	struct netxen_skb_frag *buffrag;
 	unsigned int i;
 
-	u32 producer = 0;
+	u32 producer, consumer;
 	u32 saved_producer = 0;
 	struct cmd_desc_type0 *hwdesc;
 	int k;
 	struct netxen_cmd_buffer *pbuf = NULL;
-	static int dropped_packet = 0;
 	int frag_count;
-	u32 local_producer = 0;
-	u32 max_tx_desc_count = 0;
-	u32 last_cmd_consumer = 0;
 	int no_of_desc;
+	u32 num_txd = adapter->max_tx_desc_count;
 
-	adapter->stats.xmitcalled++;
 	frag_count = skb_shinfo(skb)->nr_frags + 1;
 
-	if (unlikely(skb->len <= 0)) {
-		dev_kfree_skb_any(skb);
-		adapter->stats.badskblen++;
-		return NETDEV_TX_OK;
-	}
-
-	if (frag_count > MAX_BUFFERS_PER_CMD) {
-		printk("%s: %s netxen_nic_xmit_frame: frag_count (%d) "
-		       "too large, can handle only %d frags\n",
-		       netxen_nic_driver_name, netdev->name,
-		       frag_count, MAX_BUFFERS_PER_CMD);
-		adapter->stats.txdropped++;
-		if ((++dropped_packet & 0xff) == 0xff)
-			printk("%s: %s droppped packets = %d\n",
-			       netxen_nic_driver_name, netdev->name,
-			       dropped_packet);
-
-		return NETDEV_TX_OK;
-	}
-
 	/* There 4 fragments per descriptor */
 	no_of_desc = (frag_count + 3) >> 2;
 	if (netdev->features & NETIF_F_TSO) {
@@ -1007,27 +974,16 @@
 		}
 	}
 
-	spin_lock_bh(&adapter->tx_lock);
-	if (adapter->total_threads >= MAX_XMIT_PRODUCERS) {
-		goto out_requeue;
+	producer = adapter->cmd_producer;
+	smp_mb();
+	consumer = adapter->last_cmd_consumer;
+	if ((no_of_desc+2) > find_diff_among(producer, consumer, num_txd)) {
+		netif_stop_queue(netdev);
+		smp_mb();
+		return NETDEV_TX_BUSY;
 	}
-	local_producer = adapter->cmd_producer;
-	k = adapter->cmd_producer;
-	max_tx_desc_count = adapter->max_tx_desc_count;
-	last_cmd_consumer = adapter->last_cmd_consumer;
-	if ((k + no_of_desc) >=
-	    ((last_cmd_consumer <= k) ? last_cmd_consumer + max_tx_desc_count :
-	     last_cmd_consumer)) {
-		goto out_requeue;
-	}
-	k = get_index_range(k, max_tx_desc_count, no_of_desc);
-	adapter->cmd_producer = k;
-	adapter->total_threads++;
-	adapter->num_threads++;
 
-	spin_unlock_bh(&adapter->tx_lock);
 	/* Copy the descriptors into the hardware    */
-	producer = local_producer;
 	saved_producer = producer;
 	hwdesc = &hw->cmd_desc_head[producer];
 	memset(hwdesc, 0, sizeof(struct cmd_desc_type0));
@@ -1067,8 +1023,7 @@
 		/* move to next desc. if there is a need */
 		if ((i & 0x3) == 0) {
 			k = 0;
-			producer = get_next_index(producer,
-						  adapter->max_tx_desc_count);
+			producer = get_next_index(producer, num_txd);
 			hwdesc = &hw->cmd_desc_head[producer];
 			memset(hwdesc, 0, sizeof(struct cmd_desc_type0));
 			pbuf = &adapter->cmd_buf_arr[producer];
@@ -1086,7 +1041,6 @@
 		buffrag->dma = temp_dma;
 		buffrag->length = temp_len;
 
-		DPRINTK(INFO, "for loop. i=%d k=%d\n", i, k);
 		switch (k) {
 		case 0:
 			hwdesc->buffer1_length = cpu_to_le16(temp_len);
@@ -1107,7 +1061,7 @@
 		}
 		frag++;
 	}
-	producer = get_next_index(producer, adapter->max_tx_desc_count);
+	producer = get_next_index(producer, num_txd);
 
 	/* might change opcode to TX_TCP_LSO */
 	netxen_tso_check(adapter, &hw->cmd_desc_head[saved_producer], skb);
@@ -1134,7 +1088,7 @@
 		/* copy the first 64 bytes */
 		memcpy(((void *)hwdesc) + 2,
 		       (void *)(skb->data), first_hdr_len);
-		producer = get_next_index(producer, max_tx_desc_count);
+		producer = get_next_index(producer, num_txd);
 
 		if (more_hdr) {
 			hwdesc = &hw->cmd_desc_head[producer];
@@ -1147,35 +1101,19 @@
 							 hwdesc,
 							 (hdr_len -
 							  first_hdr_len));
-			producer = get_next_index(producer, max_tx_desc_count);
+			producer = get_next_index(producer, num_txd);
 		}
 	}
 
-	spin_lock_bh(&adapter->tx_lock);
+	adapter->cmd_producer = producer;
 	adapter->stats.txbytes += skb->len;
 
-	/* Code to update the adapter considering how many producer threads
-	   are currently working */
-	if ((--adapter->num_threads) == 0) {
-		/* This is the last thread */
-		u32 crb_producer = adapter->cmd_producer;
-		netxen_nic_update_cmd_producer(adapter, crb_producer);
-		wmb();
-		adapter->total_threads = 0;
-	}
+	netxen_nic_update_cmd_producer(adapter, adapter->cmd_producer);
 
-	adapter->stats.xmitfinished++;
+	adapter->stats.xmitcalled++;
 	netdev->trans_start = jiffies;
 
-	spin_unlock_bh(&adapter->tx_lock);
 	return NETDEV_TX_OK;
-
-out_requeue:
-	netif_stop_queue(netdev);
-	adapter->flags |= NETXEN_NETDEV_STATUS;
-
-	spin_unlock_bh(&adapter->tx_lock);
-	return NETDEV_TX_BUSY;
 }
 
 static void netxen_watchdog(unsigned long v)
@@ -1200,87 +1138,60 @@
 	printk(KERN_ERR "%s %s: transmit timeout, resetting.\n",
 	       netxen_nic_driver_name, adapter->netdev->name);
 
-	netxen_nic_close(adapter->netdev);
-	netxen_nic_open(adapter->netdev);
+	netxen_nic_disable_int(adapter);
+	napi_disable(&adapter->napi);
+
 	adapter->netdev->trans_start = jiffies;
+
+	napi_enable(&adapter->napi);
+	netxen_nic_enable_int(adapter);
 	netif_wake_queue(adapter->netdev);
 }
 
-static int
-netxen_handle_int(struct netxen_adapter *adapter, struct net_device *netdev)
+static inline void
+netxen_handle_int(struct netxen_adapter *adapter)
 {
-	u32 ret = 0;
-
-	DPRINTK(INFO, "Entered handle ISR\n");
-	adapter->stats.ints++;
-
 	netxen_nic_disable_int(adapter);
-
-	if (netxen_nic_rx_has_work(adapter) || netxen_nic_tx_has_work(adapter)) {
-		if (netif_rx_schedule_prep(netdev, &adapter->napi)) {
-			/*
-			 * Interrupts are already disabled.
-			 */
-			__netif_rx_schedule(netdev, &adapter->napi);
-		} else {
-			static unsigned int intcount = 0;
-			if ((++intcount & 0xfff) == 0xfff)
-				DPRINTK(KERN_ERR
-				       "%s: %s interrupt %d while in poll\n",
-				       netxen_nic_driver_name, netdev->name,
-				       intcount);
-		}
-		ret = 1;
-	}
-
-	if (ret == 0) {
-		netxen_nic_enable_int(adapter);
-	}
-
-	return ret;
+	napi_schedule(&adapter->napi);
 }
 
-/*
- * netxen_intr - Interrupt Handler
- * @irq: interrupt number
- * data points to adapter stucture (which may be handling more than 1 port
- */
 irqreturn_t netxen_intr(int irq, void *data)
 {
 	struct netxen_adapter *adapter = data;
-	struct net_device *netdev = adapter->netdev;
 	u32 our_int = 0;
 
-	if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
-		our_int = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR));
-		/* not our interrupt */
-		if ((our_int & (0x80 << adapter->portnum)) == 0)
-			return IRQ_NONE;
-	}
+	our_int = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR));
+	/* not our interrupt */
+	if ((our_int & (0x80 << adapter->portnum)) == 0)
+		return IRQ_NONE;
 
 	if (adapter->intr_scheme == INTR_SCHEME_PERPORT) {
 		/* claim interrupt */
-		if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
-			writel(our_int & ~((u32)(0x80 << adapter->portnum)),
+		writel(our_int & ~((u32)(0x80 << adapter->portnum)),
 			NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR));
-		}
 	}
 
-	if (netif_running(netdev))
-		netxen_handle_int(adapter, netdev);
+	netxen_handle_int(adapter);
 
 	return IRQ_HANDLED;
 }
 
+irqreturn_t netxen_msi_intr(int irq, void *data)
+{
+	struct netxen_adapter *adapter = data;
+
+	netxen_handle_int(adapter);
+	return IRQ_HANDLED;
+}
+
 static int netxen_nic_poll(struct napi_struct *napi, int budget)
 {
 	struct netxen_adapter *adapter = container_of(napi, struct netxen_adapter, napi);
-	struct net_device *netdev = adapter->netdev;
-	int done = 1;
+	int tx_complete;
 	int ctx;
 	int work_done;
 
-	DPRINTK(INFO, "polling for %d descriptors\n", *budget);
+	tx_complete = netxen_process_cmd_ring(adapter);
 
 	work_done = 0;
 	for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) {
@@ -1300,16 +1211,8 @@
 						     budget / MAX_RCV_CTX);
 	}
 
-	if (work_done >= budget)
-		done = 0;
-
-	if (netxen_process_cmd_ring((unsigned long)adapter) == 0)
-		done = 0;
-
-	DPRINTK(INFO, "new work_done: %d work_to_do: %d\n",
-		work_done, work_to_do);
-	if (done) {
-		netif_rx_complete(netdev, napi);
+	if ((work_done < budget) && tx_complete) {
+		netif_rx_complete(adapter->netdev, &adapter->napi);
 		netxen_nic_enable_int(adapter);
 	}
 
diff --git a/drivers/net/netxen/netxen_nic_phan_reg.h b/drivers/net/netxen/netxen_nic_phan_reg.h
index ffa3b72..a566b50 100644
--- a/drivers/net/netxen/netxen_nic_phan_reg.h
+++ b/drivers/net/netxen/netxen_nic_phan_reg.h
@@ -126,8 +126,11 @@
  */
 #define CRB_NIC_CAPABILITIES_HOST	NETXEN_NIC_REG(0x1a8)
 #define CRB_NIC_CAPABILITIES_FW	  	NETXEN_NIC_REG(0x1dc)
+#define CRB_NIC_MSI_MODE_HOST		NETXEN_NIC_REG(0x270)
+#define CRB_NIC_MSI_MODE_FW	  		NETXEN_NIC_REG(0x274)
 
 #define INTR_SCHEME_PERPORT	      	0x1
+#define MSI_MODE_MULTIFUNC	      	0x1
 
 /* used for ethtool tests */
 #define CRB_SCRATCHPAD_TEST	    NETXEN_NIC_REG(0x280)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index f057407..32a8503a 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -58,9 +58,25 @@
 #define MII_M1111_RX_DELAY		0x80
 #define MII_M1111_TX_DELAY		0x2
 #define MII_M1111_PHY_EXT_SR		0x1b
-#define MII_M1111_HWCFG_MODE_MASK	0xf
-#define MII_M1111_HWCFG_MODE_RGMII	0xb
+
+#define MII_M1111_HWCFG_MODE_MASK		0xf
+#define MII_M1111_HWCFG_MODE_COPPER_RGMII	0xb
+#define MII_M1111_HWCFG_MODE_FIBER_RGMII	0x3
 #define MII_M1111_HWCFG_MODE_SGMII_NO_CLK	0x4
+#define MII_M1111_HWCFG_FIBER_COPPER_AUTO	0x8000
+#define MII_M1111_HWCFG_FIBER_COPPER_RES	0x2000
+
+#define MII_M1111_COPPER		0
+#define MII_M1111_FIBER			1
+
+#define MII_M1011_PHY_STATUS		0x11
+#define MII_M1011_PHY_STATUS_1000	0x8000
+#define MII_M1011_PHY_STATUS_100	0x4000
+#define MII_M1011_PHY_STATUS_SPD_MASK	0xc000
+#define MII_M1011_PHY_STATUS_FULLDUPLEX	0x2000
+#define MII_M1011_PHY_STATUS_RESOLVED	0x0800
+#define MII_M1011_PHY_STATUS_LINK	0x0400
+
 
 MODULE_DESCRIPTION("Marvell PHY driver");
 MODULE_AUTHOR("Andy Fleming");
@@ -141,12 +157,22 @@
 static int m88e1111_config_init(struct phy_device *phydev)
 {
 	int err;
+	int temp;
+	int mode;
+
+	/* Enable Fiber/Copper auto selection */
+	temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+	temp |= MII_M1111_HWCFG_FIBER_COPPER_AUTO;
+	phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+
+	temp = phy_read(phydev, MII_BMCR);
+	temp |= BMCR_RESET;
+	phy_write(phydev, MII_BMCR, temp);
 
 	if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
 	    (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) ||
 	    (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
 	    (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) {
-		int temp;
 
 		temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
 		if (temp < 0)
@@ -171,7 +197,13 @@
 			return temp;
 
 		temp &= ~(MII_M1111_HWCFG_MODE_MASK);
-		temp |= MII_M1111_HWCFG_MODE_RGMII;
+
+		mode = phy_read(phydev, MII_M1111_PHY_EXT_CR);
+
+		if (mode & MII_M1111_HWCFG_FIBER_COPPER_RES)
+			temp |= MII_M1111_HWCFG_MODE_FIBER_RGMII;
+		else
+			temp |= MII_M1111_HWCFG_MODE_COPPER_RGMII;
 
 		err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
 		if (err < 0)
@@ -179,8 +211,6 @@
 	}
 
 	if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
-		int temp;
-
 		temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
 		if (temp < 0)
 			return temp;
@@ -262,6 +292,93 @@
 	return 0;
 }
 
+/* marvell_read_status
+ *
+ * Generic status code does not detect Fiber correctly!
+ * Description:
+ *   Check the link, then figure out the current state
+ *   by comparing what we advertise with what the link partner
+ *   advertises.  Start by checking the gigabit possibilities,
+ *   then move on to 10/100.
+ */
+static int marvell_read_status(struct phy_device *phydev)
+{
+	int adv;
+	int err;
+	int lpa;
+	int status = 0;
+
+	/* Update the link, but return if there
+	 * was an error */
+	err = genphy_update_link(phydev);
+	if (err)
+		return err;
+
+	if (AUTONEG_ENABLE == phydev->autoneg) {
+		status = phy_read(phydev, MII_M1011_PHY_STATUS);
+		if (status < 0)
+			return status;
+
+		lpa = phy_read(phydev, MII_LPA);
+		if (lpa < 0)
+			return lpa;
+
+		adv = phy_read(phydev, MII_ADVERTISE);
+		if (adv < 0)
+			return adv;
+
+		lpa &= adv;
+
+		if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
+			phydev->duplex = DUPLEX_FULL;
+		else
+			phydev->duplex = DUPLEX_HALF;
+
+		status = status & MII_M1011_PHY_STATUS_SPD_MASK;
+		phydev->pause = phydev->asym_pause = 0;
+
+		switch (status) {
+		case MII_M1011_PHY_STATUS_1000:
+			phydev->speed = SPEED_1000;
+			break;
+
+		case MII_M1011_PHY_STATUS_100:
+			phydev->speed = SPEED_100;
+			break;
+
+		default:
+			phydev->speed = SPEED_10;
+			break;
+		}
+
+		if (phydev->duplex == DUPLEX_FULL) {
+			phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
+			phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
+		}
+	} else {
+		int bmcr = phy_read(phydev, MII_BMCR);
+
+		if (bmcr < 0)
+			return bmcr;
+
+		if (bmcr & BMCR_FULLDPLX)
+			phydev->duplex = DUPLEX_FULL;
+		else
+			phydev->duplex = DUPLEX_HALF;
+
+		if (bmcr & BMCR_SPEED1000)
+			phydev->speed = SPEED_1000;
+		else if (bmcr & BMCR_SPEED100)
+			phydev->speed = SPEED_100;
+		else
+			phydev->speed = SPEED_10;
+
+		phydev->pause = phydev->asym_pause = 0;
+	}
+
+	return 0;
+}
+
 static struct phy_driver marvell_drivers[] = {
 	{
 		.phy_id = 0x01410c60,
@@ -296,7 +413,7 @@
 		.flags = PHY_HAS_INTERRUPT,
 		.config_init = &m88e1111_config_init,
 		.config_aneg = &marvell_config_aneg,
-		.read_status = &genphy_read_status,
+		.read_status = &marvell_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
 		.config_intr = &marvell_config_intr,
 		.driver = { .owner = THIS_MODULE },
diff --git a/drivers/net/plip.c b/drivers/net/plip.c
index fee3d7b..1e96542 100644
--- a/drivers/net/plip.c
+++ b/drivers/net/plip.c
@@ -903,17 +903,18 @@
 	struct net_local *nl;
 	struct plip_local *rcv;
 	unsigned char c0;
+	unsigned long flags;
 
 	nl = netdev_priv(dev);
 	rcv = &nl->rcv_data;
 
-	spin_lock_irq (&nl->lock);
+	spin_lock_irqsave (&nl->lock, flags);
 
 	c0 = read_status(dev);
 	if ((c0 & 0xf8) != 0xc0) {
 		if ((dev->irq != -1) && (net_debug > 1))
 			printk(KERN_DEBUG "%s: spurious interrupt\n", dev->name);
-		spin_unlock_irq (&nl->lock);
+		spin_unlock_irqrestore (&nl->lock, flags);
 		return;
 	}
 
@@ -942,7 +943,7 @@
 		break;
 	}
 
-	spin_unlock_irq(&nl->lock);
+	spin_unlock_irqrestore(&nl->lock, flags);
 }
 
 static int
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index c72787a..c082cf0 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -84,7 +84,7 @@
 #include "s2io.h"
 #include "s2io-regs.h"
 
-#define DRV_VERSION "2.0.26.15-2"
+#define DRV_VERSION "2.0.26.20"
 
 /* S2io Driver name & version. */
 static char s2io_driver_name[] = "Neterion";
@@ -4172,6 +4172,9 @@
 	dev->trans_start = jiffies;
 	spin_unlock_irqrestore(&fifo->tx_lock, flags);
 
+	if (sp->config.intr_type == MSI_X)
+		tx_intr_handler(fifo);
+
 	return 0;
 pci_map_failed:
 	stats->pci_map_fail_cnt++;
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 186eb8e..2e26dce 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -3199,12 +3199,14 @@
 	skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR), CSR_START);
 
 	if (work_done < to_do) {
-		spin_lock_irq(&hw->hw_lock);
+		unsigned long flags;
+
+		spin_lock_irqsave(&hw->hw_lock, flags);
 		__netif_rx_complete(dev, napi);
 		hw->intr_mask |= napimask[skge->port];
 		skge_write32(hw, B0_IMSK, hw->intr_mask);
 		skge_read32(hw, B0_IMSK);
-		spin_unlock_irq(&hw->hw_lock);
+		spin_unlock_irqrestore(&hw->hw_lock, flags);
 	}
 
 	return work_done;
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 54c6626..853bce0 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -4329,10 +4329,14 @@
 	if (!hw)
 		return 0;
 
+	del_timer_sync(&hw->watchdog_timer);
+	cancel_work_sync(&hw->restart_work);
+
 	for (i = 0; i < hw->ports; i++) {
 		struct net_device *dev = hw->dev[i];
 		struct sky2_port *sky2 = netdev_priv(dev);
 
+		netif_device_detach(dev);
 		if (netif_running(dev))
 			sky2_down(dev);
 
@@ -4383,6 +4387,8 @@
 
 	for (i = 0; i < hw->ports; i++) {
 		struct net_device *dev = hw->dev[i];
+
+		netif_device_attach(dev);
 		if (netif_running(dev)) {
 			err = sky2_up(dev);
 			if (err) {
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index c49214f..7b7b1717 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -1472,13 +1472,12 @@
 #ifndef final_version			/* Remove after testing. */
 		/* You will want this info for the initial debug. */
 		if (debug > 5) {
-			DECLARE_MAC_BUF(mac);
-			DECLARE_MAC_BUF(mac2);
-
-			printk(KERN_DEBUG "  Rx data %s %s"
+			printk(KERN_DEBUG "  Rx data " MAC_FMT " " MAC_FMT
 			       " %2.2x%2.2x.\n",
-			       print_mac(mac, &skb->data[0]),
-			       print_mac(mac2, &skb->data[6]),
+			       skb->data[0], skb->data[1], skb->data[2],
+			       skb->data[3], skb->data[4], skb->data[5],
+			       skb->data[6], skb->data[7], skb->data[8],
+			       skb->data[9], skb->data[10], skb->data[11],
 			       skb->data[12], skb->data[13]);
 		}
 #endif
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index f9ef8bd..d4655b2 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -64,8 +64,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.88"
-#define DRV_MODULE_RELDATE	"March 20, 2008"
+#define DRV_MODULE_VERSION	"3.89"
+#define DRV_MODULE_RELDATE	"April 03, 2008"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -804,6 +804,12 @@
 	return ret;
 }
 
+static void tg3_phydsp_write(struct tg3 *tp, u32 reg, u32 val)
+{
+	tg3_writephy(tp, MII_TG3_DSP_ADDRESS, reg);
+	tg3_writephy(tp, MII_TG3_DSP_RW_PORT, val);
+}
+
 static void tg3_phy_toggle_automdix(struct tg3 *tp, int enable)
 {
 	u32 phy;
@@ -886,6 +892,49 @@
 	return 0;
 }
 
+static void tg3_phy_apply_otp(struct tg3 *tp)
+{
+	u32 otp, phy;
+
+	if (!tp->phy_otp)
+		return;
+
+	otp = tp->phy_otp;
+
+	/* Enable SM_DSP clock and tx 6dB coding. */
+	phy = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
+	      MII_TG3_AUXCTL_ACTL_SMDSP_ENA |
+	      MII_TG3_AUXCTL_ACTL_TX_6DB;
+	tg3_writephy(tp, MII_TG3_AUX_CTRL, phy);
+
+	phy = ((otp & TG3_OTP_AGCTGT_MASK) >> TG3_OTP_AGCTGT_SHIFT);
+	phy |= MII_TG3_DSP_TAP1_AGCTGT_DFLT;
+	tg3_phydsp_write(tp, MII_TG3_DSP_TAP1, phy);
+
+	phy = ((otp & TG3_OTP_HPFFLTR_MASK) >> TG3_OTP_HPFFLTR_SHIFT) |
+	      ((otp & TG3_OTP_HPFOVER_MASK) >> TG3_OTP_HPFOVER_SHIFT);
+	tg3_phydsp_write(tp, MII_TG3_DSP_AADJ1CH0, phy);
+
+	phy = ((otp & TG3_OTP_LPFDIS_MASK) >> TG3_OTP_LPFDIS_SHIFT);
+	phy |= MII_TG3_DSP_AADJ1CH3_ADCCKADJ;
+	tg3_phydsp_write(tp, MII_TG3_DSP_AADJ1CH3, phy);
+
+	phy = ((otp & TG3_OTP_VDAC_MASK) >> TG3_OTP_VDAC_SHIFT);
+	tg3_phydsp_write(tp, MII_TG3_DSP_EXP75, phy);
+
+	phy = ((otp & TG3_OTP_10BTAMP_MASK) >> TG3_OTP_10BTAMP_SHIFT);
+	tg3_phydsp_write(tp, MII_TG3_DSP_EXP96, phy);
+
+	phy = ((otp & TG3_OTP_ROFF_MASK) >> TG3_OTP_ROFF_SHIFT) |
+	      ((otp & TG3_OTP_RCOFF_MASK) >> TG3_OTP_RCOFF_SHIFT);
+	tg3_phydsp_write(tp, MII_TG3_DSP_EXP97, phy);
+
+	/* Turn off SM_DSP clock. */
+	phy = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
+	      MII_TG3_AUXCTL_ACTL_TX_6DB;
+	tg3_writephy(tp, MII_TG3_AUX_CTRL, phy);
+}
+
 static int tg3_wait_macro_done(struct tg3 *tp)
 {
 	int limit = 100;
@@ -1073,6 +1122,7 @@
  */
 static int tg3_phy_reset(struct tg3 *tp)
 {
+	u32 cpmuctrl;
 	u32 phy_status;
 	int err;
 
@@ -1102,10 +1152,28 @@
 		goto out;
 	}
 
+	cpmuctrl = 0;
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
+	    GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) {
+		cpmuctrl = tr32(TG3_CPMU_CTRL);
+		if (cpmuctrl & CPMU_CTRL_GPHY_10MB_RXONLY)
+			tw32(TG3_CPMU_CTRL,
+			     cpmuctrl & ~CPMU_CTRL_GPHY_10MB_RXONLY);
+	}
+
 	err = tg3_bmcr_reset(tp);
 	if (err)
 		return err;
 
+	if (cpmuctrl & CPMU_CTRL_GPHY_10MB_RXONLY) {
+		u32 phy;
+
+		phy = MII_TG3_DSP_EXP8_AEDW | MII_TG3_DSP_EXP8_REJ2MHz;
+		tg3_phydsp_write(tp, MII_TG3_DSP_EXP8, phy);
+
+		tw32(TG3_CPMU_CTRL, cpmuctrl);
+	}
+
 	if (tp->tg3_flags3 & TG3_FLG3_5761_5784_AX_FIXES) {
 		u32 val;
 
@@ -1124,6 +1192,8 @@
 			     MII_TG3_MISC_SHDW_APD_WKTM_84MS);
 	}
 
+	tg3_phy_apply_otp(tp);
+
 out:
 	if (tp->tg3_flags2 & TG3_FLG2_PHY_ADC_BUG) {
 		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
@@ -9464,7 +9534,8 @@
 	if (err)
 		return TG3_LOOPBACK_FAILED;
 
-	if (tp->tg3_flags3 & TG3_FLG3_5761_5784_AX_FIXES) {
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761) {
 		int i;
 		u32 status;
 
@@ -9481,17 +9552,23 @@
 		if (status != CPMU_MUTEX_GNT_DRIVER)
 			return TG3_LOOPBACK_FAILED;
 
-		/* Turn off power management based on link speed. */
+		/* Turn off link-based power management. */
 		cpmuctrl = tr32(TG3_CPMU_CTRL);
-		tw32(TG3_CPMU_CTRL,
-		     cpmuctrl & ~(CPMU_CTRL_LINK_SPEED_MODE |
-				  CPMU_CTRL_LINK_AWARE_MODE));
+		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
+		    GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5761_AX)
+			tw32(TG3_CPMU_CTRL,
+			     cpmuctrl & ~(CPMU_CTRL_LINK_SPEED_MODE |
+					  CPMU_CTRL_LINK_AWARE_MODE));
+		else
+			tw32(TG3_CPMU_CTRL,
+			     cpmuctrl & ~CPMU_CTRL_LINK_AWARE_MODE);
 	}
 
 	if (tg3_run_loopback(tp, TG3_MAC_LOOPBACK))
 		err |= TG3_MAC_LOOPBACK_FAILED;
 
-	if (tp->tg3_flags3 & TG3_FLG3_5761_5784_AX_FIXES) {
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761) {
 		tw32(TG3_CPMU_CTRL, cpmuctrl);
 
 		/* Release the mutex */
@@ -10724,9 +10801,8 @@
 		    tp->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL)
 			tp->led_ctrl = LED_CTRL_MODE_PHY_2;
 
-		if (tp->pci_chip_rev_id == CHIPREV_ID_5784_A0 ||
-		    tp->pci_chip_rev_id == CHIPREV_ID_5784_A1)
-			tp->led_ctrl = LED_CTRL_MODE_MAC;
+		if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX)
+			tp->led_ctrl = LED_CTRL_MODE_PHY_1;
 
 		if (nic_cfg & NIC_SRAM_DATA_CFG_EEPROM_WP) {
 			tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT;
@@ -10773,6 +10849,55 @@
 	}
 }
 
+static int __devinit tg3_issue_otp_command(struct tg3 *tp, u32 cmd)
+{
+	int i;
+	u32 val;
+
+	tw32(OTP_CTRL, cmd | OTP_CTRL_OTP_CMD_START);
+	tw32(OTP_CTRL, cmd);
+
+	/* Wait for up to 1 ms for command to execute. */
+	for (i = 0; i < 100; i++) {
+		val = tr32(OTP_STATUS);
+		if (val & OTP_STATUS_CMD_DONE)
+			break;
+		udelay(10);
+	}
+
+	return (val & OTP_STATUS_CMD_DONE) ? 0 : -EBUSY;
+}
+
+/* Read the gphy configuration from the OTP region of the chip.  The gphy
+ * configuration is a 32-bit value that straddles the alignment boundary.
+ * We do two 32-bit reads and then shift and merge the results.
+ */
+static u32 __devinit tg3_read_otp_phycfg(struct tg3 *tp)
+{
+	u32 bhalf_otp, thalf_otp;
+
+	tw32(OTP_MODE, OTP_MODE_OTP_THRU_GRC);
+
+	if (tg3_issue_otp_command(tp, OTP_CTRL_OTP_CMD_INIT))
+		return 0;
+
+	tw32(OTP_ADDRESS, OTP_ADDRESS_MAGIC1);
+
+	if (tg3_issue_otp_command(tp, OTP_CTRL_OTP_CMD_READ))
+		return 0;
+
+	thalf_otp = tr32(OTP_READ_DATA);
+
+	tw32(OTP_ADDRESS, OTP_ADDRESS_MAGIC2);
+
+	if (tg3_issue_otp_command(tp, OTP_CTRL_OTP_CMD_READ))
+		return 0;
+
+	bhalf_otp = tr32(OTP_READ_DATA);
+
+	return ((thalf_otp & 0x0000ffff) << 16) | (bhalf_otp >> 16);
+}
+
 static int __devinit tg3_phy_probe(struct tg3 *tp)
 {
 	u32 hw_phy_id_1, hw_phy_id_2;
@@ -11586,6 +11711,13 @@
 			tp->tg3_flags2 |= TG3_FLG2_PHY_BER_BUG;
 	}
 
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
+	    GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) {
+		tp->phy_otp = tg3_read_otp_phycfg(tp);
+		if (tp->phy_otp == 0)
+			tp->phy_otp = TG3_OTP_DEFAULT;
+	}
+
 	tp->coalesce_mode = 0;
 	if (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_AX &&
 	    GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_BX)
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 3938eb3..c1075a7 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -138,6 +138,8 @@
 #define   CHIPREV_5704_BX		 0x21
 #define   CHIPREV_5750_AX		 0x40
 #define   CHIPREV_5750_BX		 0x41
+#define   CHIPREV_5784_AX		 0x57840
+#define   CHIPREV_5761_AX		 0x57610
 #define  GET_METAL_REV(CHIP_REV_ID)	((CHIP_REV_ID) & 0xff)
 #define   METAL_REV_A0			 0x00
 #define   METAL_REV_A1			 0x01
@@ -866,6 +868,7 @@
 #define  CPMU_CTRL_LINK_IDLE_MODE	 0x00000200
 #define  CPMU_CTRL_LINK_AWARE_MODE	 0x00000400
 #define  CPMU_CTRL_LINK_SPEED_MODE	 0x00004000
+#define  CPMU_CTRL_GPHY_10MB_RXONLY	 0x00010000
 #define TG3_CPMU_LSPD_10MB_CLK		0x00003604
 #define  CPMU_LSPD_10MB_MACCLK_MASK	 0x001f0000
 #define  CPMU_LSPD_10MB_MACCLK_6_25	 0x00130000
@@ -1559,7 +1562,24 @@
 /* 0x702c unused */
 
 #define NVRAM_ADDR_LOCKOUT		0x00007030
-/* 0x7034 --> 0x7c00 unused */
+/* 0x7034 --> 0x7500 unused */
+
+#define OTP_MODE			0x00007500
+#define OTP_MODE_OTP_THRU_GRC		 0x00000001
+#define OTP_CTRL			0x00007504
+#define OTP_CTRL_OTP_PROG_ENABLE	 0x00200000
+#define OTP_CTRL_OTP_CMD_READ		 0x00000000
+#define OTP_CTRL_OTP_CMD_INIT		 0x00000008
+#define OTP_CTRL_OTP_CMD_START		 0x00000001
+#define OTP_STATUS			0x00007508
+#define OTP_STATUS_CMD_DONE		 0x00000001
+#define OTP_ADDRESS			0x0000750c
+#define OTP_ADDRESS_MAGIC1		 0x000000a0
+#define OTP_ADDRESS_MAGIC2		 0x00000080
+/* 0x7510 unused */
+
+#define OTP_READ_DATA			0x00007514
+/* 0x7518 --> 0x7c04 unused */
 
 #define PCIE_TRANSACTION_CFG		0x00007c04
 #define PCIE_TRANS_CFG_1SHOT_MSI	 0x20000000
@@ -1568,6 +1588,28 @@
 #define PCIE_PWR_MGMT_THRESH		0x00007d28
 #define PCIE_PWR_MGMT_L1_THRESH_MSK	 0x0000ff00
 
+
+/* OTP bit definitions */
+#define TG3_OTP_AGCTGT_MASK		0x000000e0
+#define TG3_OTP_AGCTGT_SHIFT		1
+#define TG3_OTP_HPFFLTR_MASK		0x00000300
+#define TG3_OTP_HPFFLTR_SHIFT		1
+#define TG3_OTP_HPFOVER_MASK		0x00000400
+#define TG3_OTP_HPFOVER_SHIFT		1
+#define TG3_OTP_LPFDIS_MASK		0x00000800
+#define TG3_OTP_LPFDIS_SHIFT		11
+#define TG3_OTP_VDAC_MASK		0xff000000
+#define TG3_OTP_VDAC_SHIFT		24
+#define TG3_OTP_10BTAMP_MASK		0x0000f000
+#define TG3_OTP_10BTAMP_SHIFT		8
+#define TG3_OTP_ROFF_MASK		0x00e00000
+#define TG3_OTP_ROFF_SHIFT		11
+#define TG3_OTP_RCOFF_MASK		0x001c0000
+#define TG3_OTP_RCOFF_SHIFT		16
+
+#define TG3_OTP_DEFAULT			0x286c1640
+
+
 #define TG3_EEPROM_MAGIC		0x669955aa
 #define TG3_EEPROM_MAGIC_FW		0xa5000000
 #define TG3_EEPROM_MAGIC_FW_MSK		0xff000000
@@ -1705,15 +1747,31 @@
 
 #define MII_TG3_DSP_RW_PORT		0x15 /* DSP coefficient read/write port */
 
-#define MII_TG3_DSP_ADDRESS		0x17 /* DSP address register */
 #define MII_TG3_EPHY_PTEST		0x17 /* 5906 PHY register */
+#define MII_TG3_DSP_ADDRESS		0x17 /* DSP address register */
+
+#define MII_TG3_DSP_TAP1		0x0001
+#define  MII_TG3_DSP_TAP1_AGCTGT_DFLT	0x0007
+#define MII_TG3_DSP_AADJ1CH0		0x001f
+#define MII_TG3_DSP_AADJ1CH3		0x601f
+#define  MII_TG3_DSP_AADJ1CH3_ADCCKADJ	0x0002
+#define MII_TG3_DSP_EXP8		0x0708
+#define  MII_TG3_DSP_EXP8_REJ2MHz	0x0001
+#define  MII_TG3_DSP_EXP8_AEDW		0x0200
+#define MII_TG3_DSP_EXP75		0x0f75
+#define MII_TG3_DSP_EXP96		0x0f96
+#define MII_TG3_DSP_EXP97		0x0f97
 
 #define MII_TG3_AUX_CTRL		0x18 /* auxilliary control register */
 
 #define MII_TG3_AUXCTL_MISC_WREN	0x8000
 #define MII_TG3_AUXCTL_MISC_FORCE_AMDIX	0x0200
 #define MII_TG3_AUXCTL_MISC_RDSEL_MISC	0x7000
-#define MII_TG3_AUXCTL_SHDWSEL_MISC		0x0007
+#define MII_TG3_AUXCTL_SHDWSEL_MISC	0x0007
+
+#define MII_TG3_AUXCTL_ACTL_SMDSP_ENA	0x0800
+#define MII_TG3_AUXCTL_ACTL_TX_6DB	0x0400
+#define MII_TG3_AUXCTL_SHDWSEL_AUXCTL	0x0000
 
 #define MII_TG3_AUX_STAT		0x19 /* auxilliary status register */
 #define MII_TG3_AUX_STAT_LPASS		0x0004
@@ -1743,6 +1801,20 @@
 #define MII_TG3_INT_DUPLEXCHG		0x0008
 #define MII_TG3_INT_ANEG_PAGE_RX	0x0400
 
+#define MII_TG3_MISC_SHDW		0x1c
+#define MII_TG3_MISC_SHDW_WREN		0x8000
+#define MII_TG3_MISC_SHDW_SCR5_SEL	0x1400
+#define MII_TG3_MISC_SHDW_APD_SEL	0x2800
+
+#define MII_TG3_MISC_SHDW_SCR5_C125OE	0x0001
+#define MII_TG3_MISC_SHDW_SCR5_DLLAPD	0x0002
+#define MII_TG3_MISC_SHDW_SCR5_SDTL	0x0004
+#define MII_TG3_MISC_SHDW_SCR5_DLPTLM	0x0008
+#define MII_TG3_MISC_SHDW_SCR5_LPED	0x0010
+
+#define MII_TG3_MISC_SHDW_APD_WKTM_84MS	0x0001
+#define MII_TG3_MISC_SHDW_APD_ENABLE	0x0020
+
 #define MII_TG3_EPHY_TEST		0x1f /* 5906 PHY register */
 #define MII_TG3_EPHY_SHADOW_EN		0x80
 
@@ -2473,6 +2545,7 @@
 #define PHY_REV_BCM5411_X0		0x1 /* Found on Netgear GA302T */
 
 	u32				led_ctrl;
+	u32				phy_otp;
 	u16				pci_cmd;
 
 	char				board_part_number[24];
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index 433c994..0ab51a0 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -117,7 +117,7 @@
  * Official releases will only have an a.b.c version number format. 
  */
 
-static char version[] __devinitdata = 
+static char version[] =
 "Olympic.c v1.0.5 6/04/02 - Peter De Schrijver & Mike Phillips" ; 
 
 static char *open_maj_error[]  = {"No error", "Lobe Media Test", "Physical Insertion",
@@ -290,7 +290,7 @@
 	return i;
 }
 
-static int __devinit olympic_init(struct net_device *dev)
+static int olympic_init(struct net_device *dev)
 {
     	struct olympic_private *olympic_priv;
 	u8 __iomem *olympic_mmio, *init_srb,*adapter_addr;
@@ -434,7 +434,7 @@
 
 }
 
-static int __devinit olympic_open(struct net_device *dev) 
+static int olympic_open(struct net_device *dev)
 {
 	struct olympic_private *olympic_priv=netdev_priv(dev);
 	u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio,*init_srb;
@@ -1438,13 +1438,18 @@
 
 		if (olympic_priv->olympic_network_monitor) { 
 			struct trh_hdr *mac_hdr;
-			DECLARE_MAC_BUF(mac);
 			printk(KERN_WARNING "%s: Received MAC Frame, details: \n",dev->name);
 			mac_hdr = tr_hdr(mac_frame);
-			printk(KERN_WARNING "%s: MAC Frame Dest. Addr: %s\n",
-			       dev->name, print_mac(mac, mac_hdr->daddr));
-			printk(KERN_WARNING "%s: MAC Frame Srce. Addr: %s\n",
-			       dev->name, print_mac(mac, mac_hdr->saddr));
+			printk(KERN_WARNING "%s: MAC Frame Dest. Addr: "
+			       MAC_FMT " \n", dev->name,
+			       mac_hdr->daddr[0], mac_hdr->daddr[1],
+			       mac_hdr->daddr[2], mac_hdr->daddr[3],
+			       mac_hdr->daddr[4], mac_hdr->daddr[5]);
+			printk(KERN_WARNING "%s: MAC Frame Srce. Addr: "
+			       MAC_FMT " \n", dev->name,
+			       mac_hdr->saddr[0], mac_hdr->saddr[1],
+			       mac_hdr->saddr[2], mac_hdr->saddr[3],
+			       mac_hdr->saddr[4], mac_hdr->saddr[5]);
 		}
 		netif_rx(mac_frame);
 		dev->last_rx = jiffies;
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index 8909050..5f1c507 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -3413,7 +3413,7 @@
         tsv->svi = TRANSMIT_STATUS_CODE;
         tsv->svl = S_TRANSMIT_STATUS_CODE;
 
-        tsv->svv[0] = ((tx_fstatus & 0x0100 >> 6) || IBM_PASS_SOURCE_ADDR);
+	tsv->svv[0] = ((tx_fstatus & 0x0100 >> 6) | IBM_PASS_SOURCE_ADDR);
 
         /* Stripped frame status of Transmitted Frame */
         tsv->svv[1] = tx_fstatus & 0xff;
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index 206918b..da2206f6 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -343,6 +343,12 @@
 	void __iomem *ee_addr = tp->base_addr + CSR9;
 	int read_cmd = location | (EE_READ_CMD << addr_len);
 
+	/* If location is past the end of what we can address, don't
+	 * read some other location (ie truncate). Just return zero.
+	 */
+	if (location > (1 << addr_len) - 1)
+		return 0;
+
 	iowrite32(EE_ENB & ~EE_CS, ee_addr);
 	iowrite32(EE_ENB, ee_addr);
 
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index ed600bf..82f404b 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -1437,6 +1437,7 @@
 	   EEPROM.
 	   */
 	ee_data = tp->eeprom;
+	memset(ee_data, 0, sizeof(tp->eeprom));
 	sum = 0;
 	if (chip_idx == LC82C168) {
 		for (i = 0; i < 3; i++) {
@@ -1458,8 +1459,12 @@
 		/* A serial EEPROM interface, we read now and sort it out later. */
 		int sa_offset = 0;
 		int ee_addr_size = tulip_read_eeprom(dev, 0xff, 8) & 0x40000 ? 8 : 6;
+		int ee_max_addr = ((1 << ee_addr_size) - 1) * sizeof(u16);
 
-		for (i = 0; i < sizeof(tp->eeprom); i+=2) {
+		if (ee_max_addr > sizeof(tp->eeprom))
+			ee_max_addr = sizeof(tp->eeprom);
+
+		for (i = 0; i < ee_max_addr ; i += sizeof(u16)) {
 			u16 data = tulip_read_eeprom(dev, i/2, ee_addr_size);
 			ee_data[i] = data & 0xff;
 			ee_data[i + 1] = data >> 8;
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index a12c9c4..0604f3f 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -129,7 +129,7 @@
 
 config USB_NET_AX8817X
 	tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
-	depends on USB_USBNET && NET_ETHERNET
+	depends on USB_USBNET
 	select CRC32
 	default y
 	help
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 4b131a6..01660f6 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -341,7 +341,7 @@
 	/* We use the 20 byte dev->data for our 8 byte filter buffer
 	 * to avoid allocating memory that is tricky to free later */
 	u8 *hashes = (u8 *) & dev->data;
-	u8 rx_ctl = 0x01;
+	u8 rx_ctl = 0x31;
 
 	memset(hashes, 0x00, DM_MCAST_SIZE);
 	hashes[DM_MCAST_SIZE - 1] |= 0x80;	/* broadcast address */
@@ -354,7 +354,7 @@
 		struct dev_mc_list *mc_list = net->mc_list;
 		int i;
 
-		for (i = 0; i < net->mc_count; i++) {
+		for (i = 0; i < net->mc_count; i++, mc_list = mc_list->next) {
 			u32 crc = ether_crc(ETH_ALEN, mc_list->dmi_addr) >> 26;
 			hashes[crc >> 3] |= 1 << (crc & 0x7);
 		}
@@ -562,6 +562,10 @@
 	 USB_DEVICE(0x0a46, 0x8515),	/* ADMtek ADM8515 USB NIC */
 	 .driver_info = (unsigned long)&dm9601_info,
 	 },
+	{
+	USB_DEVICE(0x0a47, 0x9601),	/* Hirose USB-100 */
+	.driver_info = (unsigned long)&dm9601_info,
+	 },
 	{},			// END
 };
 
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index d1ed68a..b588c89 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -1128,12 +1128,8 @@
 {
 	pegasus_t *pegasus;
 
-	if (in_atomic())
-		return 0;
-
 	pegasus = netdev_priv(dev);
 	mii_ethtool_gset(&pegasus->mii, ecmd);
-
 	return 0;
 }
 
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 727547a..369c731 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -283,7 +283,7 @@
 		struct rndis_set_c	*set_c;
 		struct rndis_halt	*halt;
 	} u;
-	u32			tmp, *phym;
+	u32			tmp, phym_unspec, *phym;
 	int			reply_len;
 	unsigned char		*bp;
 
@@ -363,12 +363,15 @@
 		goto halt_fail_and_release;
 
 	/* Check physical medium */
+	phym = NULL;
 	reply_len = sizeof *phym;
 	retval = rndis_query(dev, intf, u.buf, OID_GEN_PHYSICAL_MEDIUM,
 			0, (void **) &phym, &reply_len);
-	if (retval != 0)
+	if (retval != 0 || !phym) {
 		/* OID is optional so don't fail here. */
-		*phym = RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED;
+		phym_unspec = RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED;
+		phym = &phym_unspec;
+	}
 	if ((flags & FLAG_RNDIS_PHYM_WIRELESS) &&
 			*phym != RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN) {
 		if (netif_msg_probe(dev))
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index b58472c..555b70c 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -234,11 +234,12 @@
 	struct scatterlist sg[1+MAX_SKB_FRAGS];
 	struct virtio_net_hdr *hdr;
 	const unsigned char *dest = ((struct ethhdr *)skb->data)->h_dest;
-	DECLARE_MAC_BUF(mac);
 
 	sg_init_table(sg, 1+MAX_SKB_FRAGS);
 
-	pr_debug("%s: xmit %p %s\n", dev->name, skb, print_mac(mac, dest));
+	pr_debug("%s: xmit %p " MAC_FMT "\n", dev->name, skb,
+		 dest[0], dest[1], dest[2],
+		 dest[3], dest[4], dest[5]);
 
 	/* Encode metadata header at front. */
 	hdr = skb_vnet_hdr(skb);
@@ -284,7 +285,6 @@
 		/* Activate callback for using skbs: if this returns false it
 		 * means some were used in the meantime. */
 		if (unlikely(!vi->svq->vq_ops->enable_cb(vi->svq))) {
-			printk("Unlikely: restart svq race\n");
 			vi->svq->vq_ops->disable_cb(vi->svq);
 			netif_start_queue(dev);
 			goto again;
diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index fb37b80..824df3b 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -58,7 +58,7 @@
 	struct net_device_stats stats;		/* some statistics */
 };
 
-static struct list_head lapbeth_devices = LIST_HEAD_INIT(lapbeth_devices);
+static LIST_HEAD(lapbeth_devices);
 
 /* ------------------------------------------------------------------------ */
 
diff --git a/drivers/net/wireless/arlan-proc.c b/drivers/net/wireless/arlan-proc.c
index c6e70db..2ab1d59 100644
--- a/drivers/net/wireless/arlan-proc.c
+++ b/drivers/net/wireless/arlan-proc.c
@@ -1202,13 +1202,6 @@
 	{ .ctl_name = 0 }
 };
 #endif
-#else
-
-static ctl_table arlan_table[MAX_ARLANS + 1] =
-{
-	{ .ctl_name = 0 }
-};
-#endif
 
 
 // static int mmtu = 1234;
@@ -1233,7 +1226,6 @@
 //};
 
 
-#ifdef CONFIG_PROC_FS
 static struct ctl_table_header *arlan_device_sysctl_header;
 
 int __init init_arlan_proc(void)
diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c
index e38ed0f..7fca2ebc 100644
--- a/drivers/net/wireless/b43/debugfs.c
+++ b/drivers/net/wireless/b43/debugfs.c
@@ -618,6 +618,7 @@
 	kfree(e);
 }
 
+/* Called with IRQs disabled. */
 void b43_debugfs_log_txstat(struct b43_wldev *dev,
 			    const struct b43_txstatus *status)
 {
@@ -629,8 +630,7 @@
 	if (!e)
 		return;
 	log = &e->txstatlog;
-	B43_WARN_ON(!irqs_disabled());
-	spin_lock(&log->lock);
+	spin_lock(&log->lock); /* IRQs are already disabled. */
 	i = log->end + 1;
 	if (i == B43_NR_LOGGED_TXSTATUS)
 		i = 0;
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 3dfb28a..948eb1f 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -560,7 +560,7 @@
 /* Check if a DMA mapping address is invalid. */
 static bool b43_dma_mapping_error(struct b43_dmaring *ring,
 				  dma_addr_t addr,
-				  size_t buffersize)
+				  size_t buffersize, bool dma_to_device)
 {
 	if (unlikely(dma_mapping_error(addr)))
 		return 1;
@@ -568,11 +568,11 @@
 	switch (ring->type) {
 	case B43_DMA_30BIT:
 		if ((u64)addr + buffersize > (1ULL << 30))
-			return 1;
+			goto address_error;
 		break;
 	case B43_DMA_32BIT:
 		if ((u64)addr + buffersize > (1ULL << 32))
-			return 1;
+			goto address_error;
 		break;
 	case B43_DMA_64BIT:
 		/* Currently we can't have addresses beyond
@@ -582,6 +582,12 @@
 
 	/* The address is OK. */
 	return 0;
+
+address_error:
+	/* We can't support this address. Unmap it again. */
+	unmap_descbuffer(ring, addr, buffersize, dma_to_device);
+
+	return 1;
 }
 
 static int setup_rx_descbuffer(struct b43_dmaring *ring,
@@ -599,7 +605,7 @@
 	if (unlikely(!skb))
 		return -ENOMEM;
 	dmaaddr = map_descbuffer(ring, skb->data, ring->rx_buffersize, 0);
-	if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize)) {
+	if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) {
 		/* ugh. try to realloc in zone_dma */
 		gfp_flags |= GFP_DMA;
 
@@ -612,7 +618,8 @@
 					 ring->rx_buffersize, 0);
 	}
 
-	if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize)) {
+	if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) {
+		b43err(ring->dev->wl, "RX DMA buffer allocation failed\n");
 		dev_kfree_skb_any(skb);
 		return -EIO;
 	}
@@ -852,7 +859,8 @@
 					  b43_txhdr_size(dev),
 					  DMA_TO_DEVICE);
 
-		if (b43_dma_mapping_error(ring, dma_test, b43_txhdr_size(dev))) {
+		if (b43_dma_mapping_error(ring, dma_test,
+					  b43_txhdr_size(dev), 1)) {
 			/* ugh realloc */
 			kfree(ring->txhdr_cache);
 			ring->txhdr_cache = kcalloc(nr_slots,
@@ -867,8 +875,12 @@
 						  DMA_TO_DEVICE);
 
 			if (b43_dma_mapping_error(ring, dma_test,
-						  b43_txhdr_size(dev)))
+						  b43_txhdr_size(dev), 1)) {
+
+				b43err(dev->wl,
+				       "TXHDR DMA allocation failed\n");
 				goto err_kfree_txhdr_cache;
+			}
 		}
 
 		dma_unmap_single(dev->dev->dev,
@@ -1189,7 +1201,7 @@
 
 	meta_hdr->dmaaddr = map_descbuffer(ring, (unsigned char *)header,
 					   hdrsize, 1);
-	if (b43_dma_mapping_error(ring, meta_hdr->dmaaddr, hdrsize)) {
+	if (b43_dma_mapping_error(ring, meta_hdr->dmaaddr, hdrsize, 1)) {
 		ring->current_slot = old_top_slot;
 		ring->used_slots = old_used_slots;
 		return -EIO;
@@ -1208,7 +1220,7 @@
 
 	meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
 	/* create a bounce buffer in zone_dma on mapping failure. */
-	if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len)) {
+	if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) {
 		bounce_skb = __dev_alloc_skb(skb->len, GFP_ATOMIC | GFP_DMA);
 		if (!bounce_skb) {
 			ring->current_slot = old_top_slot;
@@ -1222,7 +1234,7 @@
 		skb = bounce_skb;
 		meta->skb = skb;
 		meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
-		if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len)) {
+		if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) {
 			ring->current_slot = old_top_slot;
 			ring->used_slots = old_used_slots;
 			err = -EIO;
@@ -1337,6 +1349,7 @@
 	return err;
 }
 
+/* Called with IRQs disabled. */
 void b43_dma_handle_txstatus(struct b43_wldev *dev,
 			     const struct b43_txstatus *status)
 {
@@ -1349,8 +1362,8 @@
 	ring = parse_cookie(dev, status->cookie, &slot);
 	if (unlikely(!ring))
 		return;
-	B43_WARN_ON(!irqs_disabled());
-	spin_lock(&ring->lock);
+
+	spin_lock(&ring->lock); /* IRQs are already disabled. */
 
 	B43_WARN_ON(!ring->tx);
 	ops = ring->ops;
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 51dfce1..c73a75b2 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2049,7 +2049,6 @@
 {
 	dev->mac_suspended--;
 	B43_WARN_ON(dev->mac_suspended < 0);
-	B43_WARN_ON(irqs_disabled());
 	if (dev->mac_suspended == 0) {
 		b43_write32(dev, B43_MMIO_MACCTL,
 			    b43_read32(dev, B43_MMIO_MACCTL)
@@ -2075,7 +2074,6 @@
 	u32 tmp;
 
 	might_sleep();
-	B43_WARN_ON(irqs_disabled());
 	B43_WARN_ON(dev->mac_suspended < 0);
 
 	if (dev->mac_suspended == 0) {
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index b79a6bd..371e4a11 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -91,6 +91,8 @@
 
 	dev->conf.ConfigBase = parse.config.base;
 	dev->conf.Present = parse.config.rmask[0];
+	dev->conf.Attributes = CONF_ENABLE_IRQ;
+	dev->conf.IntType = INT_MEMORY_AND_IO;
 
 	dev->io.BasePort2 = 0;
 	dev->io.NumPorts2 = 0;
@@ -112,8 +114,8 @@
 	if (res != CS_SUCCESS)
 		goto err_disable;
 
-	dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_FIRST_SHARED;
-	dev->irq.IRQInfo1 = IRQ_LEVEL_ID | IRQ_SHARE_ID;
+	dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
+	dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	dev->irq.Handler = NULL; /* The handler is registered later. */
 	dev->irq.Instance = NULL;
 	res = pcmcia_request_irq(dev, &dev->irq);
diff --git a/drivers/net/wireless/hostap/hostap_80211_rx.c b/drivers/net/wireless/hostap/hostap_80211_rx.c
index 49978bd..4fd7380 100644
--- a/drivers/net/wireless/hostap/hostap_80211_rx.c
+++ b/drivers/net/wireless/hostap/hostap_80211_rx.c
@@ -635,7 +635,6 @@
 {
 	struct ieee80211_hdr_4addr *hdr;
 	int res, hdrlen;
-	DECLARE_MAC_BUF(mac);
 
 	if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL)
 		return 0;
@@ -647,8 +646,10 @@
 	    strcmp(crypt->ops->name, "TKIP") == 0) {
 		if (net_ratelimit()) {
 			printk(KERN_DEBUG "%s: TKIP countermeasures: dropped "
-			       "received packet from %s\n",
-			       local->dev->name, print_mac(mac, hdr->addr2));
+			       "received packet from " MAC_FMT "\n",
+			       local->dev->name,
+			       hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+			       hdr->addr2[3], hdr->addr2[4], hdr->addr2[5]);
 		}
 		return -1;
 	}
@@ -657,9 +658,12 @@
 	res = crypt->ops->decrypt_mpdu(skb, hdrlen, crypt->priv);
 	atomic_dec(&crypt->refcnt);
 	if (res < 0) {
-		printk(KERN_DEBUG "%s: decryption failed (SA=%s"
+		printk(KERN_DEBUG "%s: decryption failed (SA=" MAC_FMT
 		       ") res=%d\n",
-		       local->dev->name, print_mac(mac, hdr->addr2), res);
+		       local->dev->name,
+		       hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+		       hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+		       res);
 		local->comm_tallies.rx_discards_wep_undecryptable++;
 		return -1;
 	}
@@ -721,7 +725,6 @@
 	struct ieee80211_crypt_data *crypt = NULL;
 	void *sta = NULL;
 	int keyidx = 0;
-	DECLARE_MAC_BUF(mac);
 
 	iface = netdev_priv(dev);
 	local = iface->local;
@@ -798,8 +801,10 @@
 			 * frames silently instead of filling system log with
 			 * these reports. */
 			printk(KERN_DEBUG "%s: WEP decryption failed (not set)"
-			       " (SA=%s)\n",
-			       local->dev->name, print_mac(mac, hdr->addr2));
+			       " (SA=" MAC_FMT ")\n",
+			       local->dev->name,
+			       hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+			       hdr->addr2[3], hdr->addr2[4], hdr->addr2[5]);
 #endif
 			local->comm_tallies.rx_discards_wep_undecryptable++;
 			goto rx_dropped;
@@ -813,8 +818,9 @@
 		    (keyidx = hostap_rx_frame_decrypt(local, skb, crypt)) < 0)
 		{
 			printk(KERN_DEBUG "%s: failed to decrypt mgmt::auth "
-			       "from %s\n", dev->name,
-			       print_mac(mac, hdr->addr2));
+			       "from " MAC_FMT "\n", dev->name,
+			       hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+			       hdr->addr2[3], hdr->addr2[4], hdr->addr2[5]);
 			/* TODO: could inform hostapd about this so that it
 			 * could send auth failure report */
 			goto rx_dropped;
@@ -982,8 +988,10 @@
 			       "unencrypted EAPOL frame\n", local->dev->name);
 		} else {
 			printk(KERN_DEBUG "%s: encryption configured, but RX "
-			       "frame not encrypted (SA=%s)\n",
-			       local->dev->name, print_mac(mac, hdr->addr2));
+			       "frame not encrypted (SA=" MAC_FMT ")\n",
+			       local->dev->name,
+			       hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+			       hdr->addr2[3], hdr->addr2[4], hdr->addr2[5]);
 			goto rx_dropped;
 		}
 	}
@@ -992,9 +1000,10 @@
 	    !hostap_is_eapol_frame(local, skb)) {
 		if (net_ratelimit()) {
 			printk(KERN_DEBUG "%s: dropped unencrypted RX data "
-			       "frame from %s"
-			       " (drop_unencrypted=1)\n",
-			       dev->name, print_mac(mac, hdr->addr2));
+			       "frame from " MAC_FMT " (drop_unencrypted=1)\n",
+			       dev->name,
+			       hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+			       hdr->addr2[3], hdr->addr2[4], hdr->addr2[5]);
 		}
 		goto rx_dropped;
 	}
diff --git a/drivers/net/wireless/hostap/hostap_80211_tx.c b/drivers/net/wireless/hostap/hostap_80211_tx.c
index e7afc3e..921c984 100644
--- a/drivers/net/wireless/hostap/hostap_80211_tx.c
+++ b/drivers/net/wireless/hostap/hostap_80211_tx.c
@@ -314,7 +314,6 @@
 	struct ieee80211_hdr_4addr *hdr;
 	u16 fc;
 	int prefix_len, postfix_len, hdr_len, res;
-	DECLARE_MAC_BUF(mac);
 
 	iface = netdev_priv(skb->dev);
 	local = iface->local;
@@ -329,8 +328,10 @@
 		hdr = (struct ieee80211_hdr_4addr *) skb->data;
 		if (net_ratelimit()) {
 			printk(KERN_DEBUG "%s: TKIP countermeasures: dropped "
-			       "TX packet to %s\n",
-			       local->dev->name, print_mac(mac, hdr->addr1));
+			       "TX packet to " MAC_FMT "\n",
+			       local->dev->name,
+			       hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+			       hdr->addr1[3], hdr->addr1[4], hdr->addr1[5]);
 		}
 		kfree_skb(skb);
 		return NULL;
diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c
index ad040a3..0acd958 100644
--- a/drivers/net/wireless/hostap/hostap_ap.c
+++ b/drivers/net/wireless/hostap/hostap_ap.c
@@ -632,7 +632,6 @@
 	__le16 *pos;
 	struct sta_info *sta = NULL;
 	char *txt = NULL;
-	DECLARE_MAC_BUF(mac);
 
 	if (ap->local->hostapd) {
 		dev_kfree_skb(skb);
@@ -684,10 +683,12 @@
 	if (sta)
 		atomic_dec(&sta->users);
 	if (txt) {
-		PDEBUG(DEBUG_AP, "%s: %s auth_cb - alg=%d "
+		PDEBUG(DEBUG_AP, "%s: " MAC_FMT " auth_cb - alg=%d "
 		       "trans#=%d status=%d - %s\n",
-		       dev->name, print_mac(mac, hdr->addr1), auth_alg,
-		       auth_transaction, status, txt);
+		       dev->name,
+		       hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+		       hdr->addr1[3], hdr->addr1[4], hdr->addr1[5],
+		       auth_alg, auth_transaction, status, txt);
 	}
 	dev_kfree_skb(skb);
 }
@@ -703,7 +704,6 @@
 	__le16 *pos;
 	struct sta_info *sta = NULL;
 	char *txt = NULL;
-	DECLARE_MAC_BUF(mac);
 
 	if (ap->local->hostapd) {
 		dev_kfree_skb(skb);
@@ -754,8 +754,11 @@
 	if (sta)
 		atomic_dec(&sta->users);
 	if (txt) {
-		PDEBUG(DEBUG_AP, "%s: %s assoc_cb - %s\n",
-		       dev->name, print_mac(mac, hdr->addr1), txt);
+		PDEBUG(DEBUG_AP, "%s: " MAC_FMT " assoc_cb - %s\n",
+		       dev->name,
+		       hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+		       hdr->addr1[3], hdr->addr1[4], hdr->addr1[5],
+		       txt);
 	}
 	dev_kfree_skb(skb);
 }
@@ -767,7 +770,6 @@
 	struct ap_data *ap = data;
 	struct ieee80211_hdr_4addr *hdr;
 	struct sta_info *sta;
-	DECLARE_MAC_BUF(mac);
 
 	if (skb->len < 24)
 		goto fail;
@@ -779,9 +781,11 @@
 			sta->flags &= ~WLAN_STA_PENDING_POLL;
 		spin_unlock(&ap->sta_table_lock);
 	} else {
-		PDEBUG(DEBUG_AP, "%s: STA %s"
+		PDEBUG(DEBUG_AP, "%s: STA " MAC_FMT
 		       " did not ACK activity poll frame\n",
-		       ap->local->dev->name, print_mac(mac, hdr->addr1));
+		       ap->local->dev->name,
+		       hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+		       hdr->addr1[3], hdr->addr1[4], hdr->addr1[5]);
 	}
 
  fail:
@@ -1306,7 +1310,6 @@
 	struct sta_info *sta = NULL;
 	struct ieee80211_crypt_data *crypt;
 	char *txt = "";
-	DECLARE_MAC_BUF(mac);
 
 	len = skb->len - IEEE80211_MGMT_HDR_LEN;
 
@@ -1315,8 +1318,9 @@
 
 	if (len < 6) {
 		PDEBUG(DEBUG_AP, "%s: handle_authen - too short payload "
-		       "(len=%d) from %s\n", dev->name, len,
-		       print_mac(mac, hdr->addr2));
+		       "(len=%d) from " MAC_FMT "\n", dev->name, len,
+		       hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+		       hdr->addr2[3], hdr->addr2[4], hdr->addr2[5]);
 		return;
 	}
 
@@ -1381,8 +1385,10 @@
 		if (time_after(jiffies, sta->u.ap.last_beacon +
 			       (10 * sta->listen_interval * HZ) / 1024)) {
 			PDEBUG(DEBUG_AP, "%s: no beacons received for a while,"
-			       " assuming AP %s is now STA\n",
-			       dev->name, print_mac(mac, sta->addr));
+			       " assuming AP " MAC_FMT " is now STA\n",
+			       dev->name,
+			       sta->addr[0], sta->addr[1], sta->addr[2],
+			       sta->addr[3], sta->addr[4], sta->addr[5]);
 			sta->ap = 0;
 			sta->flags = 0;
 			sta->u.sta.challenge = NULL;
@@ -1497,10 +1503,13 @@
 	}
 
 	if (resp) {
-		PDEBUG(DEBUG_AP, "%s: %s auth (alg=%d "
+		PDEBUG(DEBUG_AP, "%s: " MAC_FMT " auth (alg=%d "
 		       "trans#=%d stat=%d len=%d fc=%04x) ==> %d (%s)\n",
-		       dev->name, print_mac(mac, hdr->addr2), auth_alg,
-		       auth_transaction, status_code, len, fc, resp, txt);
+		       dev->name,
+		       hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+		       hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+		       auth_alg, auth_transaction, status_code, len,
+		       fc, resp, txt);
 	}
 }
 
@@ -1519,14 +1528,15 @@
 	int send_deauth = 0;
 	char *txt = "";
 	u8 prev_ap[ETH_ALEN];
-	DECLARE_MAC_BUF(mac);
 
 	left = len = skb->len - IEEE80211_MGMT_HDR_LEN;
 
 	if (len < (reassoc ? 10 : 4)) {
 		PDEBUG(DEBUG_AP, "%s: handle_assoc - too short payload "
-		       "(len=%d, reassoc=%d) from %s\n",
-		       dev->name, len, reassoc, print_mac(mac, hdr->addr2));
+		       "(len=%d, reassoc=%d) from " MAC_FMT "\n",
+		       dev->name, len, reassoc,
+		       hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+		       hdr->addr2[3], hdr->addr2[4], hdr->addr2[5]);
 		return;
 	}
 
@@ -1603,9 +1613,12 @@
 		}
 
 		if (left > 0) {
-			PDEBUG(DEBUG_AP, "%s: assoc from %s"
+			PDEBUG(DEBUG_AP, "%s: assoc from " MAC_FMT
 			       " with extra data (%d bytes) [",
-			       dev->name, print_mac(mac, hdr->addr2), left);
+			       dev->name,
+			       hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+			       hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+			       left);
 			while (left > 0) {
 				PDEBUG2(DEBUG_AP, "<%02x>", *u);
 				u++; left--;
@@ -1704,10 +1717,15 @@
 	}
 
 #if 0
-	PDEBUG(DEBUG_AP, "%s: %s %sassoc (len=%d "
-	       "prev_ap=%s) => %d(%d) (%s)\n",
-	       dev->name, print_mac(mac, hdr->addr2), reassoc ? "re" : "", len,
-	       print_mac(mac, prev_ap), resp, send_deauth, txt);
+	PDEBUG(DEBUG_AP, "%s: " MAC_FMT" %sassoc (len=%d "
+	       "prev_ap=" MAC_FMT") => %d(%d) (%s)\n",
+	       dev->name,
+	       hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+	       hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+	       reassoc ? "re" : "", len,
+	       prev_ap[0], prev_ap[1], prev_ap[2],
+	       prev_ap[3], prev_ap[4], prev_ap[5],
+	       resp, send_deauth, txt);
 #endif
 }
 
@@ -1735,9 +1753,11 @@
 	pos = (__le16 *) body;
 	reason_code = le16_to_cpu(*pos);
 
-	PDEBUG(DEBUG_AP, "%s: deauthentication: %s len=%d, "
-	       "reason_code=%d\n", dev->name, print_mac(mac, hdr->addr2), len,
-	       reason_code);
+	PDEBUG(DEBUG_AP, "%s: deauthentication: " MAC_FMT " len=%d, "
+	       "reason_code=%d\n", dev->name,
+	       hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+	       hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+	       len, reason_code);
 
 	spin_lock_bh(&local->ap->sta_table_lock);
 	sta = ap_get_sta(local->ap, hdr->addr2);
@@ -1748,9 +1768,11 @@
 	}
 	spin_unlock_bh(&local->ap->sta_table_lock);
 	if (sta == NULL) {
-		printk("%s: deauthentication from %s, "
+		printk("%s: deauthentication from " MAC_FMT ", "
 	       "reason_code=%d, but STA not authenticated\n", dev->name,
-		       print_mac(mac, hdr->addr2), reason_code);
+		       hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+		       hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+		       reason_code);
 	}
 }
 
@@ -1766,7 +1788,6 @@
 	u16 reason_code;
 	__le16 *pos;
 	struct sta_info *sta = NULL;
-	DECLARE_MAC_BUF(mac);
 
 	len = skb->len - IEEE80211_MGMT_HDR_LEN;
 
@@ -1778,9 +1799,11 @@
 	pos = (__le16 *) body;
 	reason_code = le16_to_cpu(*pos);
 
-	PDEBUG(DEBUG_AP, "%s: disassociation: %s len=%d, "
-	       "reason_code=%d\n", dev->name, print_mac(mac, hdr->addr2), len,
-	       reason_code);
+	PDEBUG(DEBUG_AP, "%s: disassociation: " MAC_FMT " len=%d, "
+	       "reason_code=%d\n", dev->name,
+	       hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+	       hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+	       len, reason_code);
 
 	spin_lock_bh(&local->ap->sta_table_lock);
 	sta = ap_get_sta(local->ap, hdr->addr2);
@@ -1791,9 +1814,12 @@
 	}
 	spin_unlock_bh(&local->ap->sta_table_lock);
 	if (sta == NULL) {
-		printk("%s: disassociation from %s, "
+		printk("%s: disassociation from " MAC_FMT ", "
 		       "reason_code=%d, but STA not authenticated\n",
-		       dev->name, print_mac(mac, hdr->addr2), reason_code);
+		       dev->name,
+		       hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+		       hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+		       reason_code);
 	}
 }
 
@@ -1882,16 +1908,20 @@
 	struct sta_info *sta;
 	u16 aid;
 	struct sk_buff *skb;
-	DECLARE_MAC_BUF(mac);
 
-	PDEBUG(DEBUG_PS2, "handle_pspoll: BSSID=%s"
-	       ", TA=%s PWRMGT=%d\n",
-	       print_mac(mac, hdr->addr1), print_mac(mac, hdr->addr2),
+	PDEBUG(DEBUG_PS2, "handle_pspoll: BSSID=" MAC_FMT
+	       ", TA=" MAC_FMT " PWRMGT=%d\n",
+	       hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+	       hdr->addr1[3], hdr->addr1[4], hdr->addr1[5],
+	       hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+	       hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
 	       !!(le16_to_cpu(hdr->frame_ctl) & IEEE80211_FCTL_PM));
 
 	if (memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN)) {
-		PDEBUG(DEBUG_AP, "handle_pspoll - addr1(BSSID)=%s"
-		       " not own MAC\n", print_mac(mac, hdr->addr1));
+		PDEBUG(DEBUG_AP, "handle_pspoll - addr1(BSSID)=" MAC_FMT
+		       " not own MAC\n",
+		       hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+		       hdr->addr1[3], hdr->addr1[4], hdr->addr1[5]);
 		return;
 	}
 
@@ -1969,7 +1999,6 @@
 					  wds_oper_queue);
 	local_info_t *local = ap->local;
 	struct wds_oper_data *entry, *prev;
-	DECLARE_MAC_BUF(mac);
 
 	spin_lock_bh(&local->lock);
 	entry = local->ap->wds_oper_entries;
@@ -1978,10 +2007,11 @@
 
 	while (entry) {
 		PDEBUG(DEBUG_AP, "%s: %s automatic WDS connection "
-		       "to AP %s\n",
+		       "to AP " MAC_FMT "\n",
 		       local->dev->name,
 		       entry->type == WDS_ADD ? "adding" : "removing",
-		       print_mac(mac, entry->addr));
+		       entry->addr[0], entry->addr[1], entry->addr[2],
+		       entry->addr[3], entry->addr[4], entry->addr[5]);
 		if (entry->type == WDS_ADD)
 			prism2_wds_add(local, entry->addr, 0);
 		else if (entry->type == WDS_DEL)
@@ -2158,7 +2188,6 @@
 #endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
 	u16 fc, type, stype;
 	struct ieee80211_hdr_4addr *hdr;
-	DECLARE_MAC_BUF(mac);
 
 	/* FIX: should give skb->len to handler functions and check that the
 	 * buffer is long enough */
@@ -2187,8 +2216,9 @@
 
 		if (memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN)) {
 			PDEBUG(DEBUG_AP, "handle_ap_item - addr1(BSSID)="
-			       "%s not own MAC\n",
-			       print_mac(mac, hdr->addr1));
+			       MAC_FMT " not own MAC\n",
+			       hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+			       hdr->addr1[3], hdr->addr1[4], hdr->addr1[5]);
 			goto done;
 		}
 
@@ -2224,14 +2254,18 @@
 	}
 
 	if (memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN)) {
-		PDEBUG(DEBUG_AP, "handle_ap_item - addr1(DA)=%s"
-		       " not own MAC\n", print_mac(mac, hdr->addr1));
+		PDEBUG(DEBUG_AP, "handle_ap_item - addr1(DA)=" MAC_FMT
+		       " not own MAC\n",
+		       hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+		       hdr->addr1[3], hdr->addr1[4], hdr->addr1[5]);
 		goto done;
 	}
 
 	if (memcmp(hdr->addr3, dev->dev_addr, ETH_ALEN)) {
-		PDEBUG(DEBUG_AP, "handle_ap_item - addr3(BSSID)=%s"
-		       " not own MAC\n", print_mac(mac, hdr->addr3));
+		PDEBUG(DEBUG_AP, "handle_ap_item - addr3(BSSID)=" MAC_FMT
+		       " not own MAC\n",
+		       hdr->addr3[0], hdr->addr3[1], hdr->addr3[2],
+		       hdr->addr3[3], hdr->addr3[4], hdr->addr3[5]);
 		goto done;
 	}
 
@@ -2312,7 +2346,6 @@
 	struct sk_buff *skb;
 	struct ieee80211_hdr_4addr *hdr;
 	struct hostap_80211_rx_status rx_stats;
-	DECLARE_MAC_BUF(mac);
 
 	if (skb_queue_empty(&sta->tx_buf))
 		return;
@@ -2334,7 +2367,9 @@
 	hdr->duration_id = cpu_to_le16(sta->aid | BIT(15) | BIT(14));
 
 	PDEBUG(DEBUG_PS2, "%s: Scheduling buffered packet delivery for STA "
-	       "%s\n", local->dev->name, print_mac(mac, sta->addr));
+	       MAC_FMT "\n", local->dev->name,
+	       sta->addr[0], sta->addr[1], sta->addr[2],
+	       sta->addr[3], sta->addr[4], sta->addr[5]);
 
 	skb->dev = local->dev;
 
@@ -2661,7 +2696,6 @@
 	int ret = sta->tx_rate;
 	struct hostap_interface *iface;
 	local_info_t *local;
-	DECLARE_MAC_BUF(mac);
 
 	iface = netdev_priv(dev);
 	local = iface->local;
@@ -2689,9 +2723,12 @@
 			case 3: sta->tx_rate = 110; break;
 			default: sta->tx_rate = 0; break;
 			}
-			PDEBUG(DEBUG_AP, "%s: STA %s"
+			PDEBUG(DEBUG_AP, "%s: STA " MAC_FMT
 			       " TX rate raised to %d\n",
-			       dev->name, print_mac(mac, sta->addr), sta->tx_rate);
+			       dev->name,
+			       sta->addr[0], sta->addr[1], sta->addr[2],
+			       sta->addr[3], sta->addr[4], sta->addr[5],
+			       sta->tx_rate);
 		}
 		sta->tx_since_last_failure = 0;
 	}
@@ -2709,7 +2746,6 @@
 	int set_tim, ret;
 	struct ieee80211_hdr_4addr *hdr;
 	struct hostap_skb_tx_data *meta;
-	DECLARE_MAC_BUF(mac);
 
 	meta = (struct hostap_skb_tx_data *) skb->cb;
 	ret = AP_TX_CONTINUE;
@@ -2745,8 +2781,9 @@
 		 * print out any errors here. */
 		if (net_ratelimit()) {
 			printk(KERN_DEBUG "AP: drop packet to non-associated "
-			       "STA %s\n",
-			       print_mac(mac, hdr->addr1));
+			       "STA " MAC_FMT "\n",
+			       hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+			       hdr->addr1[3], hdr->addr1[4], hdr->addr1[5]);
 		}
 #endif
 		local->ap->tx_drop_nonassoc++;
@@ -2784,9 +2821,11 @@
 	}
 
 	if (skb_queue_len(&sta->tx_buf) >= STA_MAX_TX_BUFFER) {
-		PDEBUG(DEBUG_PS, "%s: No more space in STA (%s"
+		PDEBUG(DEBUG_PS, "%s: No more space in STA (" MAC_FMT
 		       ")'s PS mode buffer\n",
-		       local->dev->name, print_mac(mac, sta->addr));
+		       local->dev->name,
+		       sta->addr[0], sta->addr[1], sta->addr[2],
+		       sta->addr[3], sta->addr[4], sta->addr[5]);
 		/* Make sure that TIM is set for the station (it might not be
 		 * after AP wlan hw reset). */
 		/* FIX: should fix hw reset to restore bits based on STA
@@ -2850,7 +2889,6 @@
 	struct sta_info *sta;
 	struct ieee80211_hdr_4addr *hdr;
 	struct hostap_skb_tx_data *meta;
-	DECLARE_MAC_BUF(mac);
 
 	hdr = (struct ieee80211_hdr_4addr *) skb->data;
 	meta = (struct hostap_skb_tx_data *) skb->cb;
@@ -2859,9 +2897,12 @@
 	sta = ap_get_sta(local->ap, hdr->addr1);
 	if (!sta) {
 		spin_unlock(&local->ap->sta_table_lock);
-		PDEBUG(DEBUG_AP, "%s: Could not find STA %s"
+		PDEBUG(DEBUG_AP, "%s: Could not find STA " MAC_FMT
 		       " for this TX error (@%lu)\n",
-		       local->dev->name, print_mac(mac, hdr->addr1), jiffies);
+		       local->dev->name,
+		       hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+		       hdr->addr1[3], hdr->addr1[4], hdr->addr1[5],
+		       jiffies);
 		return;
 	}
 
@@ -2888,9 +2929,11 @@
 			case 3: sta->tx_rate = 110; break;
 			default: sta->tx_rate = 0; break;
 			}
-			PDEBUG(DEBUG_AP, "%s: STA %s"
+			PDEBUG(DEBUG_AP, "%s: STA " MAC_FMT
 			       " TX rate lowered to %d\n",
-			       local->dev->name, print_mac(mac, sta->addr),
+			       local->dev->name,
+			       sta->addr[0], sta->addr[1], sta->addr[2],
+			       sta->addr[3], sta->addr[4], sta->addr[5],
 			       sta->tx_rate);
 		}
 		sta->tx_consecutive_exc = 0;
@@ -2956,7 +2999,6 @@
 	struct sta_info *sta;
 	u16 fc, type, stype;
 	struct ieee80211_hdr_4addr *hdr;
-	DECLARE_MAC_BUF(mac);
 
 	if (local->ap == NULL)
 		return AP_RX_CONTINUE;
@@ -2988,9 +3030,12 @@
 			} else {
 				printk(KERN_DEBUG "%s: dropped received packet"
 				       " from non-associated STA "
-				       "%s"
+				       MAC_FMT
 				       " (type=0x%02x, subtype=0x%02x)\n",
-				       dev->name, print_mac(mac, hdr->addr2),
+				       dev->name,
+				       hdr->addr2[0], hdr->addr2[1],
+				       hdr->addr2[2], hdr->addr2[3],
+				       hdr->addr2[4], hdr->addr2[5],
 				       type >> 2, stype >> 4);
 				hostap_rx(dev, skb, rx_stats);
 #endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
@@ -3025,8 +3070,11 @@
 			 * being associated. */
 			printk(KERN_DEBUG "%s: rejected received nullfunc "
 			       "frame without ToDS from not associated STA "
-			       "%s\n",
-			       dev->name, print_mac(mac, hdr->addr2));
+			       MAC_FMT "\n",
+			       dev->name,
+			       hdr->addr2[0], hdr->addr2[1],
+			       hdr->addr2[2], hdr->addr2[3],
+			       hdr->addr2[4], hdr->addr2[5]);
 			hostap_rx(dev, skb, rx_stats);
 #endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
 		}
@@ -3043,9 +3091,12 @@
 		 * If BSSID is own, report the dropping of this frame. */
 		if (memcmp(hdr->addr3, dev->dev_addr, ETH_ALEN) == 0) {
 			printk(KERN_DEBUG "%s: dropped received packet from "
-			       "%s with no ToDS flag "
+			       MAC_FMT " with no ToDS flag "
 			       "(type=0x%02x, subtype=0x%02x)\n", dev->name,
-			       print_mac(mac, hdr->addr2), type >> 2, stype >> 4);
+			       hdr->addr2[0], hdr->addr2[1],
+			       hdr->addr2[2], hdr->addr2[3],
+			       hdr->addr2[4], hdr->addr2[5],
+			       type >> 2, stype >> 4);
 			hostap_dump_rx_80211(dev->name, skb, rx_stats);
 		}
 		ret = AP_RX_DROP;
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index a56d9fc..98d6ff6 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -10192,7 +10192,6 @@
 	u8 id, hdr_len, unicast;
 	u16 remaining_bytes;
 	int fc;
-	DECLARE_MAC_BUF(mac);
 
 	hdr_len = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
 	switch (priv->ieee->iw_mode) {
@@ -10203,8 +10202,10 @@
 			id = ipw_add_station(priv, hdr->addr1);
 			if (id == IPW_INVALID_STATION) {
 				IPW_WARNING("Attempt to send data to "
-					    "invalid cell: %s\n",
-					    print_mac(mac, hdr->addr1));
+					    "invalid cell: " MAC_FMT "\n",
+					    hdr->addr1[0], hdr->addr1[1],
+					    hdr->addr1[2], hdr->addr1[3],
+					    hdr->addr1[4], hdr->addr1[5]);
 				goto drop;
 			}
 		}
@@ -11576,6 +11577,7 @@
 	priv->prom_priv->priv = priv;
 
 	strcpy(priv->prom_net_dev->name, "rtap%d");
+	memcpy(priv->prom_net_dev->dev_addr, priv->mac_addr, ETH_ALEN);
 
 	priv->prom_net_dev->type = ARPHRD_IEEE80211_RADIOTAP;
 	priv->prom_net_dev->open = ipw_prom_open;
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index d1af938..b54ff71 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -20,7 +20,7 @@
 	  runs.
 
 	  If you want to compile the driver as a module ( = code which can be
-	  inserted in and remvoed from the running kernel whenever you want),
+	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
 	  module will be called iwl4965.ko.
 
@@ -35,7 +35,6 @@
 	bool "Enable 802.11n HT features in iwl4965 driver"
 	depends on EXPERIMENTAL
 	depends on IWL4965 && IWL4965_QOS
-	depends on n
 	---help---
 	  This option enables IEEE 802.11n High Throughput features
 	  for the iwl4965 driver.
@@ -101,7 +100,7 @@
 	  runs.
 
 	  If you want to compile the driver as a module ( = code which can be
-	  inserted in and remvoed from the running kernel whenever you want),
+	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
 	  module will be called iwl3945.ko.
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index d727de8..6576757 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -4589,7 +4589,7 @@
 
 	if (sta_ht_inf) {
 		if ((!sta_ht_inf->ht_supported) ||
-		   (!sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH))
+		   (!(sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH)))
 			return 0;
 	}
 
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 40b71bc..cbaeaf18 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -6206,11 +6206,11 @@
 
 	/* At this point, the NIC is initialized and operational */
 	priv->notif_missed_beacons = 0;
-	set_bit(STATUS_READY, &priv->status);
 
 	iwl3945_reg_txpower_periodic(priv);
 
 	IWL_DEBUG_INFO("ALIVE processing complete.\n");
+	set_bit(STATUS_READY, &priv->status);
 	wake_up_interruptible(&priv->wait_command_queue);
 
 	if (priv->error_recovering)
@@ -8706,7 +8706,7 @@
 	return err;
 }
 
-static void iwl3945_pci_remove(struct pci_dev *pdev)
+static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
 {
 	struct iwl3945_priv *priv = pci_get_drvdata(pdev);
 	struct list_head *p, *q;
diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
index a23d479..60ec29e 100644
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c
@@ -6628,11 +6628,11 @@
 
 	/* At this point, the NIC is initialized and operational */
 	priv->notif_missed_beacons = 0;
-	set_bit(STATUS_READY, &priv->status);
 
 	iwl4965_rf_kill_ct_config(priv);
 
 	IWL_DEBUG_INFO("ALIVE processing complete.\n");
+	set_bit(STATUS_READY, &priv->status);
 	wake_up_interruptible(&priv->wait_command_queue);
 
 	if (priv->error_recovering)
@@ -9282,7 +9282,7 @@
 	return err;
 }
 
-static void iwl4965_pci_remove(struct pci_dev *pdev)
+static void __devexit iwl4965_pci_remove(struct pci_dev *pdev)
 {
 	struct iwl4965_priv *priv = pci_get_drvdata(pdev);
 	struct list_head *p, *q;
diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c
index 87e145f..6a24ed60 100644
--- a/drivers/net/wireless/libertas/assoc.c
+++ b/drivers/net/wireless/libertas/assoc.c
@@ -541,7 +541,7 @@
 	}
 
 	if (find_any_ssid) {
-		u8 new_mode;
+		u8 new_mode = assoc_req->mode;
 
 		ret = lbs_find_best_network_ssid(priv, assoc_req->ssid,
 				&assoc_req->ssid_len, assoc_req->mode, &new_mode);
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 5a9cadb..038c66a 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -677,9 +677,7 @@
 
 	/* Card has a command result for us */
 	if (*ireg & IF_CS_C_S_CMD_UPLD_RDY) {
-		spin_lock(&priv->driver_lock);
 		ret = if_cs_receive_cmdres(priv, priv->upld_buf, &priv->upld_len);
-		spin_unlock(&priv->driver_lock);
 		if (ret < 0)
 			lbs_pr_err("could not receive cmd from card\n");
 	}
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index bd305f7..e873a39f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1393,11 +1393,20 @@
 
 exit:
 	/*
-	 * Set device mode to sleep for power management.
+	 * Set device mode to sleep for power management,
+	 * on some hardware this call seems to consistently fail.
+	 * From the specifications it is hard to tell why it fails,
+	 * and if this is a "bad thing".
+	 * Overall it is safe to just ignore the failure and
+	 * continue suspending. The only downside is that the
+	 * device will not be in optimal power save mode, but with
+	 * the radio and the other components already disabled the
+	 * device is as good as disabled.
 	 */
 	retval = rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP);
 	if (retval)
-		return retval;
+		WARNING(rt2x00dev, "Device failed to enter sleep state, "
+			"continue suspending.\n");
 
 	return 0;
 }
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 93ea212..ad2e7d5 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2399,10 +2399,8 @@
 	 * beacon frame.
 	 */
 	if (skb_headroom(skb) < TXD_DESC_SIZE) {
-		if (pskb_expand_head(skb, TXD_DESC_SIZE, 0, GFP_ATOMIC)) {
-			dev_kfree_skb(skb);
+		if (pskb_expand_head(skb, TXD_DESC_SIZE, 0, GFP_ATOMIC))
 			return -ENOMEM;
-		}
 	}
 
 	/*
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 8103d41..3909cf4 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2095,6 +2095,8 @@
 	{ USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Conceptronic */
 	{ USB_DEVICE(0x14b2, 0x3c22), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* Corega */
+	{ USB_DEVICE(0x07aa, 0x002e), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* D-Link */
 	{ USB_DEVICE(0x07d1, 0x3c03), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) },
diff --git a/drivers/net/wireless/wavelan_cs.h b/drivers/net/wireless/wavelan_cs.h
index fabc63e..2e4bfe4 100644
--- a/drivers/net/wireless/wavelan_cs.h
+++ b/drivers/net/wireless/wavelan_cs.h
@@ -309,7 +309,7 @@
 #define	MMW_EXT_ANT_INTERNAL	0x00	/* Internal antenna */
 #define	MMW_EXT_ANT_EXTERNAL	0x03	/* External antenna */
 #define	MMW_EXT_ANT_IQ_TEST	0x1C	/* IQ test pattern (set to 0) */
-};
+} __attribute__((packed));
 
 /* Size for structure checking (if padding is correct) */
 #define	MMW_SIZE	37
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index d76d37b..a858089 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -1568,9 +1568,8 @@
 		outb(r | 8, 0x2F);
 		outb(0x02, 0x2E);	/* Lock */
 		outb(0x02, 0x2F);
-
-		release_region(0x2e, 1);
 	}
+	release_region(0x2e, 1);
 }
 #endif /* CONFIG_PARPORT_PC_SUPERIO */
 
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index e9a333d98..e887aa4 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -951,6 +951,12 @@
  * accesses to the SMBus registers, with potentially bad effects. Thus you
  * should be very careful when adding new entries: if SMM is accessing the
  * Intel SMBus, this is a very good reason to leave it hidden.
+ *
+ * Likewise, many recent laptops use ACPI for thermal management. If the
+ * ACPI DSDT code accesses the SMBus, then Linux should not access it
+ * natively, and keeping the SMBus hidden is the right thing to do. If you
+ * are about to add an entry in the table below, please first disassemble
+ * the DSDT and double-check that there is no code accessing the SMBus.
  */
 static int asus_hides_smbus;
 
@@ -1028,11 +1034,6 @@
 			case 0x12bf: /* HP xw4100 */
 				asus_hides_smbus = 1;
 			}
-		else if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB)
-			switch (dev->subsystem_device) {
-			case 0x099c: /* HP Compaq nx6110 */
-				asus_hides_smbus = 1;
-			}
        } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) {
                if (dev->device ==  PCI_DEVICE_ID_INTEL_82855PM_HB)
                        switch(dev->subsystem_device) {
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index 6aa231e..2dcd196 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -85,7 +85,7 @@
 	       i < PNP_MAX_IRQ)
 		i++;
 	if (i >= PNP_MAX_IRQ && !warned) {
-		printk(KERN_ERR "pnpacpi: exceeded the max number of IRQ "
+		printk(KERN_WARNING "pnpacpi: exceeded the max number of IRQ "
 				"resources: %d \n", PNP_MAX_IRQ);
 		warned = 1;
 		return;
@@ -187,7 +187,7 @@
 		res->dma_resource[i].start = dma;
 		res->dma_resource[i].end = dma;
 	} else if (!warned) {
-		printk(KERN_ERR "pnpacpi: exceeded the max number of DMA "
+		printk(KERN_WARNING "pnpacpi: exceeded the max number of DMA "
 				"resources: %d \n", PNP_MAX_DMA);
 		warned = 1;
 	}
@@ -213,7 +213,7 @@
 		res->port_resource[i].start = io;
 		res->port_resource[i].end = io + len - 1;
 	} else if (!warned) {
-		printk(KERN_ERR "pnpacpi: exceeded the max number of IO "
+		printk(KERN_WARNING "pnpacpi: exceeded the max number of IO "
 				"resources: %d \n", PNP_MAX_PORT);
 		warned = 1;
 	}
@@ -241,7 +241,7 @@
 		res->mem_resource[i].start = mem;
 		res->mem_resource[i].end = mem + len - 1;
 	} else if (!warned) {
-		printk(KERN_ERR "pnpacpi: exceeded the max number of mem "
+		printk(KERN_WARNING "pnpacpi: exceeded the max number of mem "
 				"resources: %d\n", PNP_MAX_MEM);
 		warned = 1;
 	}
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 9e7de63..02a4c8c 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -252,6 +252,7 @@
 
 config RTC_DRV_S35390A
 	tristate "Seiko Instruments S-35390A"
+	select BITREVERSE
 	help
 	  If you say yes here you will get support for the Seiko
 	  Instruments S-35390A.
diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c
index d3b9b14..42244f1 100644
--- a/drivers/rtc/rtc-at32ap700x.c
+++ b/drivers/rtc/rtc-at32ap700x.c
@@ -290,7 +290,7 @@
 	return 0;
 }
 
-MODULE_ALIAS("at32ap700x_rtc");
+MODULE_ALIAS("platform:at32ap700x_rtc");
 
 static struct platform_driver at32_rtc_driver = {
 	.remove		= __exit_p(at32_rtc_remove),
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index 33795e5..52abffc8 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -407,3 +407,4 @@
 MODULE_AUTHOR("Rick Bronson");
 MODULE_DESCRIPTION("RTC driver for Atmel AT91RM9200");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at91_rtc");
diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c
index d90ba86..4f28045 100644
--- a/drivers/rtc/rtc-bfin.c
+++ b/drivers/rtc/rtc-bfin.c
@@ -470,3 +470,4 @@
 MODULE_DESCRIPTION("Blackfin On-Chip Real Time Clock Driver");
 MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rtc-bfin");
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index f3ee2ad..b485170 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -943,6 +943,9 @@
 	cmos_do_shutdown();
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:rtc_cmos");
+
 static struct platform_driver cmos_platform_driver = {
 	.remove		= __exit_p(cmos_platform_remove),
 	.shutdown	= cmos_platform_shutdown,
diff --git a/drivers/rtc/rtc-ds1216.c b/drivers/rtc/rtc-ds1216.c
index 83efb88..0b17770b 100644
--- a/drivers/rtc/rtc-ds1216.c
+++ b/drivers/rtc/rtc-ds1216.c
@@ -221,6 +221,7 @@
 MODULE_DESCRIPTION("DS1216 RTC driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:rtc-ds1216");
 
 module_init(ds1216_rtc_init);
 module_exit(ds1216_rtc_exit);
diff --git a/drivers/rtc/rtc-ds1511.c b/drivers/rtc/rtc-ds1511.c
index d74b8086..d08912f 100644
--- a/drivers/rtc/rtc-ds1511.c
+++ b/drivers/rtc/rtc-ds1511.c
@@ -626,6 +626,9 @@
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:ds1511");
+
 static struct platform_driver ds1511_rtc_driver = {
 	.probe		= ds1511_rtc_probe,
 	.remove		= __devexit_p(ds1511_rtc_remove),
diff --git a/drivers/rtc/rtc-ds1553.c b/drivers/rtc/rtc-ds1553.c
index d9e848d..a19f114 100644
--- a/drivers/rtc/rtc-ds1553.c
+++ b/drivers/rtc/rtc-ds1553.c
@@ -391,6 +391,9 @@
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:rtc-ds1553");
+
 static struct platform_driver ds1553_rtc_driver = {
 	.probe		= ds1553_rtc_probe,
 	.remove		= __devexit_p(ds1553_rtc_remove),
diff --git a/drivers/rtc/rtc-ds1742.c b/drivers/rtc/rtc-ds1742.c
index 2e73f0b..24d35ede 100644
--- a/drivers/rtc/rtc-ds1742.c
+++ b/drivers/rtc/rtc-ds1742.c
@@ -276,3 +276,4 @@
 MODULE_DESCRIPTION("Dallas DS1742 RTC driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:rtc-ds1742");
diff --git a/drivers/rtc/rtc-ep93xx.c b/drivers/rtc/rtc-ep93xx.c
index ef4f147..1e99325 100644
--- a/drivers/rtc/rtc-ep93xx.c
+++ b/drivers/rtc/rtc-ep93xx.c
@@ -132,6 +132,9 @@
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:ep93xx-rtc");
+
 static struct platform_driver ep93xx_rtc_platform_driver = {
 	.driver		= {
 		.name	= "ep93xx-rtc",
diff --git a/drivers/rtc/rtc-m48t59.c b/drivers/rtc/rtc-m48t59.c
index cd0bbc0..013e6c1 100644
--- a/drivers/rtc/rtc-m48t59.c
+++ b/drivers/rtc/rtc-m48t59.c
@@ -465,6 +465,9 @@
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:rtc-m48t59");
+
 static struct platform_driver m48t59_rtc_driver = {
 	.driver		= {
 		.name	= "rtc-m48t59",
diff --git a/drivers/rtc/rtc-m48t86.c b/drivers/rtc/rtc-m48t86.c
index 8ff4a12..3f7f99a 100644
--- a/drivers/rtc/rtc-m48t86.c
+++ b/drivers/rtc/rtc-m48t86.c
@@ -199,6 +199,7 @@
 MODULE_DESCRIPTION("M48T86 RTC driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:rtc-m48t86");
 
 module_init(m48t86_rtc_init);
 module_exit(m48t86_rtc_exit);
diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
index a2f84f1..58f81c7 100644
--- a/drivers/rtc/rtc-omap.c
+++ b/drivers/rtc/rtc-omap.c
@@ -497,7 +497,7 @@
 	rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
 }
 
-MODULE_ALIAS("omap_rtc");
+MODULE_ALIAS("platform:omap_rtc");
 static struct platform_driver omap_rtc_driver = {
 	.probe		= omap_rtc_probe,
 	.remove		= __devexit_p(omap_rtc_remove),
diff --git a/drivers/rtc/rtc-rs5c313.c b/drivers/rtc/rtc-rs5c313.c
index 66eb133..664e89a 100644
--- a/drivers/rtc/rtc-rs5c313.c
+++ b/drivers/rtc/rtc-rs5c313.c
@@ -421,3 +421,4 @@
 MODULE_AUTHOR("kogiidena , Nobuhiro Iwamatsu <iwamatsu@nigauri.org>");
 MODULE_DESCRIPTION("Ricoh RS5C313 RTC device driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 86766f1..9f4d512 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -592,3 +592,4 @@
 MODULE_DESCRIPTION("Samsung S3C RTC Driver");
 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c2410-rtc");
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index ee253cc..82f62d2 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -399,3 +399,4 @@
 MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
 MODULE_DESCRIPTION("SA11x0/PXA2xx Realtime Clock Driver (RTC)");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sa1100-rtc");
diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index c1d6a18..9e9caa5 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -664,3 +664,4 @@
 MODULE_VERSION(DRV_VERSION);
 MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>, Jamie Lenehan <lenehan@twibble.org>");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/rtc/rtc-stk17ta8.c b/drivers/rtc/rtc-stk17ta8.c
index a265da7..31d3c8c 100644
--- a/drivers/rtc/rtc-stk17ta8.c
+++ b/drivers/rtc/rtc-stk17ta8.c
@@ -394,6 +394,9 @@
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:stk17ta8");
+
 static struct platform_driver stk17ta8_rtc_driver = {
 	.probe		= stk17ta8_rtc_probe,
 	.remove		= __devexit_p(stk17ta8_rtc_remove),
diff --git a/drivers/rtc/rtc-v3020.c b/drivers/rtc/rtc-v3020.c
index a6b5729..24203a0 100644
--- a/drivers/rtc/rtc-v3020.c
+++ b/drivers/rtc/rtc-v3020.c
@@ -264,3 +264,4 @@
 MODULE_DESCRIPTION("V3020 RTC");
 MODULE_AUTHOR("Raphael Assenat");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:v3020");
diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c
index ce2f78d..be9c70d 100644
--- a/drivers/rtc/rtc-vr41xx.c
+++ b/drivers/rtc/rtc-vr41xx.c
@@ -422,6 +422,9 @@
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:RTC");
+
 static struct platform_driver rtc_platform_driver = {
 	.probe		= rtc_probe,
 	.remove		= __devexit_p(rtc_remove),
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 880c78b..ed7e0a1f 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -218,18 +218,24 @@
 
 	get_device(&shost->shost_gendev);
 
-	if (shost->transportt->host_size &&
-	    (shost->shost_data = kzalloc(shost->transportt->host_size,
-					 GFP_KERNEL)) == NULL)
-		goto out_del_classdev;
+	if (shost->transportt->host_size) {
+		shost->shost_data = kzalloc(shost->transportt->host_size,
+					 GFP_KERNEL);
+		if (shost->shost_data == NULL) {
+			error = -ENOMEM;
+			goto out_del_classdev;
+		}
+	}
 
 	if (shost->transportt->create_work_queue) {
 		snprintf(shost->work_q_name, KOBJ_NAME_LEN, "scsi_wq_%d",
 			shost->host_no);
 		shost->work_q = create_singlethread_workqueue(
 					shost->work_q_name);
-		if (!shost->work_q)
+		if (!shost->work_q) {
+			error = -EINVAL;
 			goto out_free_shost_data;
+		}
 	}
 
 	error = scsi_sysfs_add_host(shost);
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index 31b9af2..709a6f7 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -295,11 +295,14 @@
 	case FANOUT_DEV:
 		error = sas_discover_root_expander(dev);
 		break;
-#ifdef CONFIG_SCSI_SAS_ATA
 	case SATA_DEV:
 	case SATA_PM:
+#ifdef CONFIG_SCSI_SAS_ATA
 		error = sas_discover_sata(dev);
 		break;
+#else
+		SAS_DPRINTK("ATA device seen but CONFIG_SCSI_SAS_ATA=N so cannot attach\n");
+		/* Fall through */
 #endif
 	default:
 		error = -ENXIO;
diff --git a/drivers/scsi/mvsas.c b/drivers/scsi/mvsas.c
index 5ec0665..e55b903 100644
--- a/drivers/scsi/mvsas.c
+++ b/drivers/scsi/mvsas.c
@@ -37,11 +37,13 @@
 #include <linux/dma-mapping.h>
 #include <linux/ctype.h>
 #include <scsi/libsas.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/sas_ata.h>
 #include <asm/io.h>
 
 #define DRV_NAME	"mvsas"
-#define DRV_VERSION	"0.5.1"
-#define _MV_DUMP 0
+#define DRV_VERSION	"0.5.2"
+#define _MV_DUMP	0
 #define MVS_DISABLE_NVRAM
 #define MVS_DISABLE_MSI
 
@@ -52,7 +54,7 @@
 	readl(regs + MVS_##reg);		\
 	} while (0)
 
-#define MVS_ID_NOT_MAPPED	0xff
+#define MVS_ID_NOT_MAPPED	0x7f
 #define MVS_CHIP_SLOT_SZ	(1U << mvi->chip->slot_width)
 
 /* offset for D2H FIS in the Received FIS List Structure */
@@ -84,6 +86,7 @@
 	MVS_RX_FIS_COUNT	= 17,	/* Optional rx'd FISs (max 17) */
 
 	MVS_QUEUE_SIZE		= 30,	/* Support Queue depth */
+	MVS_CAN_QUEUE		= MVS_SLOTS - 1,	/* SCSI Queue depth */
 };
 
 /* unchangeable hardware details */
@@ -358,7 +361,20 @@
 
 	/* VSR */
 	/* PHYMODE 6 (CDB) */
-	PHY_MODE6_DTL_SPEED	= (1U << 27),
+	PHY_MODE6_LATECLK	= (1U << 29),	/* Lock Clock */
+	PHY_MODE6_DTL_SPEED	= (1U << 27),	/* Digital Loop Speed */
+	PHY_MODE6_FC_ORDER	= (1U << 26),	/* Fibre Channel Mode Order*/
+	PHY_MODE6_MUCNT_EN	= (1U << 24),	/* u Count Enable */
+	PHY_MODE6_SEL_MUCNT_LEN	= (1U << 22),	/* Training Length Select */
+	PHY_MODE6_SELMUPI	= (1U << 20),	/* Phase Multi Select (init) */
+	PHY_MODE6_SELMUPF	= (1U << 18),	/* Phase Multi Select (final) */
+	PHY_MODE6_SELMUFF	= (1U << 16),	/* Freq Loop Multi Sel(final) */
+	PHY_MODE6_SELMUFI	= (1U << 14),	/* Freq Loop Multi Sel(init) */
+	PHY_MODE6_FREEZE_LOOP	= (1U << 12),	/* Freeze Rx CDR Loop */
+	PHY_MODE6_INT_RXFOFFS	= (1U << 3),	/* Rx CDR Freq Loop Enable */
+	PHY_MODE6_FRC_RXFOFFS	= (1U << 2),	/* Initial Rx CDR Offset */
+	PHY_MODE6_STAU_0D8	= (1U << 1),	/* Rx CDR Freq Loop Saturate */
+	PHY_MODE6_RXSAT_DIS	= (1U << 0),	/* Saturate Ctl */
 };
 
 enum mvs_info_flags {
@@ -511,7 +527,43 @@
 };
 
 enum error_info_rec {
-	CMD_ISS_STPD	=  (1U << 31),	/* Cmd Issue Stopped */
+	CMD_ISS_STPD	= (1U << 31),	/* Cmd Issue Stopped */
+	CMD_PI_ERR	= (1U << 30),	/* Protection info error.  see flags2 */
+	RSP_OVER	= (1U << 29),	/* rsp buffer overflow */
+	RETRY_LIM	= (1U << 28),	/* FIS/frame retry limit exceeded */
+	UNK_FIS 	= (1U << 27),	/* unknown FIS */
+	DMA_TERM	= (1U << 26),	/* DMA terminate primitive rx'd */
+	SYNC_ERR	= (1U << 25),	/* SYNC rx'd during frame xmit */
+	TFILE_ERR	= (1U << 24),	/* SATA taskfile Error bit set */
+	R_ERR		= (1U << 23),	/* SATA returned R_ERR prim */
+	RD_OFS		= (1U << 20),	/* Read DATA frame invalid offset */
+	XFER_RDY_OFS	= (1U << 19),	/* XFER_RDY offset error */
+	UNEXP_XFER_RDY	= (1U << 18),	/* unexpected XFER_RDY error */
+	DATA_OVER_UNDER = (1U << 16),	/* data overflow/underflow */
+	INTERLOCK	= (1U << 15),	/* interlock error */
+	NAK		= (1U << 14),	/* NAK rx'd */
+	ACK_NAK_TO	= (1U << 13),	/* ACK/NAK timeout */
+	CXN_CLOSED	= (1U << 12),	/* cxn closed w/out ack/nak */
+	OPEN_TO 	= (1U << 11),	/* I_T nexus lost, open cxn timeout */
+	PATH_BLOCKED	= (1U << 10),	/* I_T nexus lost, pathway blocked */
+	NO_DEST 	= (1U << 9),	/* I_T nexus lost, no destination */
+	STP_RES_BSY	= (1U << 8),	/* STP resources busy */
+	BREAK		= (1U << 7),	/* break received */
+	BAD_DEST	= (1U << 6),	/* bad destination */
+	BAD_PROTO	= (1U << 5),	/* protocol not supported */
+	BAD_RATE	= (1U << 4),	/* cxn rate not supported */
+	WRONG_DEST	= (1U << 3),	/* wrong destination error */
+	CREDIT_TO	= (1U << 2),	/* credit timeout */
+	WDOG_TO 	= (1U << 1),	/* watchdog timeout */
+	BUF_PAR 	= (1U << 0),	/* buffer parity error */
+};
+
+enum error_info_rec_2 {
+	SLOT_BSY_ERR	= (1U << 31),	/* Slot Busy Error */
+	GRD_CHK_ERR	= (1U << 14),	/* Guard Check Error */
+	APP_CHK_ERR	= (1U << 13),	/* Application Check error */
+	REF_CHK_ERR	= (1U << 12),	/* Reference Check Error */
+	USR_BLK_NM	= (1U << 0),	/* User Block Number */
 };
 
 struct mvs_chip_info {
@@ -543,28 +595,12 @@
 	__le32			reserved[4];
 };
 
-struct mvs_slot_info {
-	struct sas_task		*task;
-	u32			n_elem;
-	u32			tx;
-
-	/* DMA buffer for storing cmd tbl, open addr frame, status buffer,
-	 * and PRD table
-	 */
-	void			*buf;
-	dma_addr_t		buf_dma;
-#if _MV_DUMP
-	u32			cmd_size;
-#endif
-
-	void			*response;
-};
-
 struct mvs_port {
 	struct asd_sas_port	sas_port;
 	u8			port_attached;
 	u8			taskfileset;
 	u8			wide_port_phymap;
+	struct list_head	list;
 };
 
 struct mvs_phy {
@@ -582,6 +618,27 @@
 	u32		frame_rcvd_size;
 	u8		frame_rcvd[32];
 	u8		phy_attached;
+	enum sas_linkrate	minimum_linkrate;
+	enum sas_linkrate	maximum_linkrate;
+};
+
+struct mvs_slot_info {
+	struct list_head	list;
+	struct sas_task		*task;
+	u32			n_elem;
+	u32			tx;
+
+	/* DMA buffer for storing cmd tbl, open addr frame, status buffer,
+	 * and PRD table
+	 */
+	void			*buf;
+	dma_addr_t		buf_dma;
+#if _MV_DUMP
+	u32			cmd_size;
+#endif
+
+	void			*response;
+	struct mvs_port		*port;
 };
 
 struct mvs_info {
@@ -612,21 +669,14 @@
 
 	const struct mvs_chip_info *chip;
 
-	unsigned long		tags[MVS_SLOTS];
+	u8			tags[MVS_SLOTS];
 	struct mvs_slot_info	slot_info[MVS_SLOTS];
 				/* further per-slot information */
 	struct mvs_phy		phy[MVS_MAX_PHYS];
 	struct mvs_port		port[MVS_MAX_PHYS];
-
-	u32			can_queue;	/* per adapter */
-	u32			tag_out;	/*Get*/
-	u32			tag_in;		/*Give*/
-};
-
-struct mvs_queue_task {
-	struct list_head list;
-
-	void   *uldd_task;
+#ifdef MVS_USE_TASKLET
+	struct tasklet_struct	tasklet;
+#endif
 };
 
 static int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
@@ -641,10 +691,11 @@
 static u32 mvs_is_phy_ready(struct mvs_info *mvi, int i);
 static void mvs_detect_porttype(struct mvs_info *mvi, int i);
 static void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st);
+static void mvs_release_task(struct mvs_info *mvi, int phy_no);
 
 static int mvs_scan_finished(struct Scsi_Host *, unsigned long);
 static void mvs_scan_start(struct Scsi_Host *);
-static int mvs_sas_slave_alloc(struct scsi_device *scsi_dev);
+static int mvs_slave_configure(struct scsi_device *sdev);
 
 static struct scsi_transport_template *mvs_stt;
 
@@ -659,7 +710,7 @@
 	.name			= DRV_NAME,
 	.queuecommand		= sas_queuecommand,
 	.target_alloc		= sas_target_alloc,
-	.slave_configure	= sas_slave_configure,
+	.slave_configure	= mvs_slave_configure,
 	.slave_destroy		= sas_slave_destroy,
 	.scan_finished		= mvs_scan_finished,
 	.scan_start		= mvs_scan_start,
@@ -674,7 +725,7 @@
 	.use_clustering		= ENABLE_CLUSTERING,
 	.eh_device_reset_handler	= sas_eh_device_reset_handler,
 	.eh_bus_reset_handler	= sas_eh_bus_reset_handler,
-	.slave_alloc		= mvs_sas_slave_alloc,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 };
@@ -709,10 +760,10 @@
 	printk("\n");
 }
 
+#if _MV_DUMP
 static void mvs_hba_sb_dump(struct mvs_info *mvi, u32 tag,
 				   enum sas_protocol proto)
 {
-#if _MV_DUMP
 	u32 offset;
 	struct pci_dev *pdev = mvi->pdev;
 	struct mvs_slot_info *slot = &mvi->slot_info[tag];
@@ -723,14 +774,14 @@
 			tag);
 	mvs_hexdump(32, (u8 *) slot->response,
 		    (u32) slot->buf_dma + offset);
-#endif
 }
+#endif
 
 static void mvs_hba_memory_dump(struct mvs_info *mvi, u32 tag,
 				enum sas_protocol proto)
 {
 #if _MV_DUMP
-	u32 sz, w_ptr, r_ptr;
+	u32 sz, w_ptr;
 	u64 addr;
 	void __iomem *regs = mvi->regs;
 	struct pci_dev *pdev = mvi->pdev;
@@ -738,12 +789,10 @@
 
 	/*Delivery Queue */
 	sz = mr32(TX_CFG) & TX_RING_SZ_MASK;
-	w_ptr = mr32(TX_PROD_IDX) & TX_RING_SZ_MASK;
-	r_ptr = mr32(TX_CONS_IDX) & TX_RING_SZ_MASK;
+	w_ptr = slot->tx;
 	addr = mr32(TX_HI) << 16 << 16 | mr32(TX_LO);
 	dev_printk(KERN_DEBUG, &pdev->dev,
-		"Delivery Queue Size=%04d , WRT_PTR=%04X , RD_PTR=%04X\n",
-		sz, w_ptr, r_ptr);
+		"Delivery Queue Size=%04d , WRT_PTR=%04X\n", sz, w_ptr);
 	dev_printk(KERN_DEBUG, &pdev->dev,
 		"Delivery Queue Base Address=0x%llX (PA)"
 		"(tx_dma=0x%llX), Entry=%04d\n",
@@ -751,11 +800,11 @@
 	mvs_hexdump(sizeof(u32), (u8 *)(&mvi->tx[mvi->tx_prod]),
 			(u32) mvi->tx_dma + sizeof(u32) * w_ptr);
 	/*Command List */
-	addr = mr32(CMD_LIST_HI) << 16 << 16 | mr32(CMD_LIST_LO);
+	addr = mvi->slot_dma;
 	dev_printk(KERN_DEBUG, &pdev->dev,
 		"Command List Base Address=0x%llX (PA)"
 		"(slot_dma=0x%llX), Header=%03d\n",
-		addr, mvi->slot_dma, tag);
+		addr, slot->buf_dma, tag);
 	dev_printk(KERN_DEBUG, &pdev->dev, "Command Header[%03d]:\n", tag);
 	/*mvs_cmd_hdr */
 	mvs_hexdump(sizeof(struct mvs_cmd_hdr), (u8 *)(&mvi->slot[tag]),
@@ -779,7 +828,7 @@
 
 static void mvs_hba_cq_dump(struct mvs_info *mvi)
 {
-#if _MV_DUMP
+#if (_MV_DUMP > 2)
 	u64 addr;
 	void __iomem *regs = mvi->regs;
 	struct pci_dev *pdev = mvi->pdev;
@@ -788,8 +837,8 @@
 
 	/*Completion Queue */
 	addr = mr32(RX_HI) << 16 << 16 | mr32(RX_LO);
-	dev_printk(KERN_DEBUG, &pdev->dev, "Completion Task = 0x%08X\n",
-		   (u32) mvi->slot_info[rx_desc & RXQ_SLOT_MASK].task);
+	dev_printk(KERN_DEBUG, &pdev->dev, "Completion Task = 0x%p\n",
+		   mvi->slot_info[rx_desc & RXQ_SLOT_MASK].task);
 	dev_printk(KERN_DEBUG, &pdev->dev,
 		"Completion List Base Address=0x%llX (PA), "
 		"CQ_Entry=%04d, CQ_WP=0x%08X\n",
@@ -854,34 +903,53 @@
 	return rc;
 }
 
+static int mvs_find_tag(struct mvs_info *mvi, struct sas_task *task, u32 *tag)
+{
+	if (task->lldd_task) {
+		struct mvs_slot_info *slot;
+		slot = (struct mvs_slot_info *) task->lldd_task;
+		*tag = slot - mvi->slot_info;
+		return 1;
+	}
+	return 0;
+}
+
 static void mvs_tag_clear(struct mvs_info *mvi, u32 tag)
 {
-	mvi->tag_in = (mvi->tag_in + 1) & (MVS_SLOTS - 1);
-	mvi->tags[mvi->tag_in] = tag;
+	void *bitmap = (void *) &mvi->tags;
+	clear_bit(tag, bitmap);
 }
 
 static void mvs_tag_free(struct mvs_info *mvi, u32 tag)
 {
-	mvi->tag_out = (mvi->tag_out - 1) & (MVS_SLOTS - 1);
+	mvs_tag_clear(mvi, tag);
+}
+
+static void mvs_tag_set(struct mvs_info *mvi, unsigned int tag)
+{
+	void *bitmap = (void *) &mvi->tags;
+	set_bit(tag, bitmap);
 }
 
 static int mvs_tag_alloc(struct mvs_info *mvi, u32 *tag_out)
 {
-	if (mvi->tag_out != mvi->tag_in) {
-		*tag_out = mvi->tags[mvi->tag_out];
-		mvi->tag_out = (mvi->tag_out + 1) & (MVS_SLOTS - 1);
-		return 0;
-	}
-	return -EBUSY;
+	unsigned int index, tag;
+	void *bitmap = (void *) &mvi->tags;
+
+	index = find_first_zero_bit(bitmap, MVS_SLOTS);
+	tag = index;
+	if (tag >= MVS_SLOTS)
+		return -SAS_QUEUE_FULL;
+	mvs_tag_set(mvi, tag);
+	*tag_out = tag;
+	return 0;
 }
 
 static void mvs_tag_init(struct mvs_info *mvi)
 {
 	int i;
 	for (i = 0; i < MVS_SLOTS; ++i)
-		mvi->tags[i] = i;
-	mvi->tag_out = 0;
-	mvi->tag_in = MVS_SLOTS - 1;
+		mvs_tag_clear(mvi, i);
 }
 
 #ifndef MVS_DISABLE_NVRAM
@@ -1013,10 +1081,21 @@
 static void mvs_bytes_dmaed(struct mvs_info *mvi, int i)
 {
 	struct mvs_phy *phy = &mvi->phy[i];
+	struct asd_sas_phy *sas_phy = mvi->sas.sas_phy[i];
 
 	if (!phy->phy_attached)
 		return;
 
+	if (sas_phy->phy) {
+		struct sas_phy *sphy = sas_phy->phy;
+
+		sphy->negotiated_linkrate = sas_phy->linkrate;
+		sphy->minimum_linkrate = phy->minimum_linkrate;
+		sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+		sphy->maximum_linkrate = phy->maximum_linkrate;
+		sphy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
+	}
+
 	if (phy->phy_type & PORT_TYPE_SAS) {
 		struct sas_identify_frame *id;
 
@@ -1053,80 +1132,149 @@
 	}
 }
 
-static int mvs_sas_slave_alloc(struct scsi_device *scsi_dev)
+static int mvs_slave_configure(struct scsi_device *sdev)
 {
-	int rc;
+	struct domain_device *dev = sdev_to_domain_dev(sdev);
+	int ret = sas_slave_configure(sdev);
 
-	rc = sas_slave_alloc(scsi_dev);
+	if (ret)
+		return ret;
 
-	return rc;
+	if (dev_is_sata(dev)) {
+		/* struct ata_port *ap = dev->sata_dev.ap; */
+		/* struct ata_device *adev = ap->link.device; */
+
+		/* clamp at no NCQ for the time being */
+		/* adev->flags |= ATA_DFLAG_NCQ_OFF; */
+		scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, 1);
+	}
+	return 0;
 }
 
-static void mvs_int_port(struct mvs_info *mvi, int port_no, u32 events)
+static void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events)
 {
 	struct pci_dev *pdev = mvi->pdev;
 	struct sas_ha_struct *sas_ha = &mvi->sas;
-	struct mvs_phy *phy = &mvi->phy[port_no];
+	struct mvs_phy *phy = &mvi->phy[phy_no];
 	struct asd_sas_phy *sas_phy = &phy->sas_phy;
 
-	phy->irq_status = mvs_read_port_irq_stat(mvi, port_no);
+	phy->irq_status = mvs_read_port_irq_stat(mvi, phy_no);
 	/*
 	* events is port event now ,
 	* we need check the interrupt status which belongs to per port.
 	*/
 	dev_printk(KERN_DEBUG, &pdev->dev,
 		"Port %d Event = %X\n",
-		port_no, phy->irq_status);
+		phy_no, phy->irq_status);
 
 	if (phy->irq_status & (PHYEV_POOF | PHYEV_DEC_ERR)) {
-		if (!mvs_is_phy_ready(mvi, port_no)) {
+		mvs_release_task(mvi, phy_no);
+		if (!mvs_is_phy_ready(mvi, phy_no)) {
 			sas_phy_disconnected(sas_phy);
 			sas_ha->notify_phy_event(sas_phy, PHYE_LOSS_OF_SIGNAL);
+			dev_printk(KERN_INFO, &pdev->dev,
+				"Port %d Unplug Notice\n", phy_no);
+
 		} else
 			mvs_phy_control(sas_phy, PHY_FUNC_LINK_RESET, NULL);
 	}
 	if (!(phy->irq_status & PHYEV_DEC_ERR)) {
 		if (phy->irq_status & PHYEV_COMWAKE) {
-			u32 tmp = mvs_read_port_irq_mask(mvi, port_no);
-			mvs_write_port_irq_mask(mvi, port_no,
+			u32 tmp = mvs_read_port_irq_mask(mvi, phy_no);
+			mvs_write_port_irq_mask(mvi, phy_no,
 						tmp | PHYEV_SIG_FIS);
 		}
 		if (phy->irq_status & (PHYEV_SIG_FIS | PHYEV_ID_DONE)) {
-			phy->phy_status = mvs_is_phy_ready(mvi, port_no);
+			phy->phy_status = mvs_is_phy_ready(mvi, phy_no);
 			if (phy->phy_status) {
-				mvs_detect_porttype(mvi, port_no);
+				mvs_detect_porttype(mvi, phy_no);
 
 				if (phy->phy_type & PORT_TYPE_SATA) {
 					u32 tmp = mvs_read_port_irq_mask(mvi,
-								port_no);
+								phy_no);
 					tmp &= ~PHYEV_SIG_FIS;
 					mvs_write_port_irq_mask(mvi,
-								port_no, tmp);
+								phy_no, tmp);
 				}
 
-				mvs_update_phyinfo(mvi, port_no, 0);
+				mvs_update_phyinfo(mvi, phy_no, 0);
 				sas_ha->notify_phy_event(sas_phy,
 							PHYE_OOB_DONE);
-				mvs_bytes_dmaed(mvi, port_no);
+				mvs_bytes_dmaed(mvi, phy_no);
 			} else {
 				dev_printk(KERN_DEBUG, &pdev->dev,
 					"plugin interrupt but phy is gone\n");
 				mvs_phy_control(sas_phy, PHY_FUNC_LINK_RESET,
 							NULL);
 			}
-		} else if (phy->irq_status & PHYEV_BROAD_CH)
+		} else if (phy->irq_status & PHYEV_BROAD_CH) {
+			mvs_release_task(mvi, phy_no);
 			sas_ha->notify_port_event(sas_phy,
 						PORTE_BROADCAST_RCVD);
+		}
 	}
-	mvs_write_port_irq_stat(mvi, port_no, phy->irq_status);
+	mvs_write_port_irq_stat(mvi, phy_no, phy->irq_status);
 }
 
 static void mvs_int_sata(struct mvs_info *mvi)
 {
-	/* FIXME */
+	u32 tmp;
+	void __iomem *regs = mvi->regs;
+	tmp = mr32(INT_STAT_SRS);
+	mw32(INT_STAT_SRS, tmp & 0xFFFF);
 }
 
-static void mvs_slot_free(struct mvs_info *mvi, struct sas_task *task,
+static void mvs_slot_reset(struct mvs_info *mvi, struct sas_task *task,
+				u32 slot_idx)
+{
+	void __iomem *regs = mvi->regs;
+	struct domain_device *dev = task->dev;
+	struct asd_sas_port *sas_port = dev->port;
+	struct mvs_port *port = mvi->slot_info[slot_idx].port;
+	u32 reg_set, phy_mask;
+
+	if (!sas_protocol_ata(task->task_proto)) {
+		reg_set = 0;
+		phy_mask = (port->wide_port_phymap) ? port->wide_port_phymap :
+				sas_port->phy_mask;
+	} else {
+		reg_set = port->taskfileset;
+		phy_mask = sas_port->phy_mask;
+	}
+	mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | slot_idx |
+					(TXQ_CMD_SLOT_RESET << TXQ_CMD_SHIFT) |
+					(phy_mask << TXQ_PHY_SHIFT) |
+					(reg_set << TXQ_SRS_SHIFT));
+
+	mw32(TX_PROD_IDX, mvi->tx_prod);
+	mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
+}
+
+static int mvs_sata_done(struct mvs_info *mvi, struct sas_task *task,
+			u32 slot_idx, int err)
+{
+	struct mvs_port *port = mvi->slot_info[slot_idx].port;
+	struct task_status_struct *tstat = &task->task_status;
+	struct ata_task_resp *resp = (struct ata_task_resp *)tstat->buf;
+	int stat = SAM_GOOD;
+
+	resp->frame_len = sizeof(struct dev_to_host_fis);
+	memcpy(&resp->ending_fis[0],
+	       SATA_RECEIVED_D2H_FIS(port->taskfileset),
+	       sizeof(struct dev_to_host_fis));
+	tstat->buf_valid_size = sizeof(*resp);
+	if (unlikely(err))
+		stat = SAS_PROTO_RESPONSE;
+	return stat;
+}
+
+static void mvs_slot_free(struct mvs_info *mvi, u32 rx_desc)
+{
+	u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
+	mvs_tag_clear(mvi, slot_idx);
+}
+
+static void mvs_slot_task_free(struct mvs_info *mvi, struct sas_task *task,
 			  struct mvs_slot_info *slot, u32 slot_idx)
 {
 	if (!sas_protocol_ata(task->task_proto))
@@ -1149,38 +1297,58 @@
 		/* do nothing */
 		break;
 	}
-
+	list_del(&slot->list);
+	task->lldd_task = NULL;
 	slot->task = NULL;
-	mvs_tag_clear(mvi, slot_idx);
+	slot->port = NULL;
 }
 
-static void mvs_slot_err(struct mvs_info *mvi, struct sas_task *task,
+static int mvs_slot_err(struct mvs_info *mvi, struct sas_task *task,
 			 u32 slot_idx)
 {
 	struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
-	u64 err_dw0 = *(u32 *) slot->response;
-	void __iomem *regs = mvi->regs;
-	u32 tmp;
+	u32 err_dw0 = le32_to_cpu(*(u32 *) (slot->response));
+	u32 err_dw1 = le32_to_cpu(*(u32 *) (slot->response + 4));
+	int stat = SAM_CHECK_COND;
 
-	if (err_dw0 & CMD_ISS_STPD)
-		if (sas_protocol_ata(task->task_proto)) {
-			tmp = mr32(INT_STAT_SRS);
-			mw32(INT_STAT_SRS, tmp & 0xFFFF);
-		}
+	if (err_dw1 & SLOT_BSY_ERR) {
+		stat = SAS_QUEUE_FULL;
+		mvs_slot_reset(mvi, task, slot_idx);
+	}
+	switch (task->task_proto) {
+	case SAS_PROTOCOL_SSP:
+		break;
+	case SAS_PROTOCOL_SMP:
+		break;
+	case SAS_PROTOCOL_SATA:
+	case SAS_PROTOCOL_STP:
+	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+		if (err_dw0 & TFILE_ERR)
+			stat = mvs_sata_done(mvi, task, slot_idx, 1);
+		break;
+	default:
+		break;
+	}
 
-	mvs_hba_sb_dump(mvi, slot_idx, task->task_proto);
+	mvs_hexdump(16, (u8 *) slot->response, 0);
+	return stat;
 }
 
-static int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc)
+static int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags)
 {
 	u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
 	struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
 	struct sas_task *task = slot->task;
-	struct task_status_struct *tstat = &task->task_status;
-	struct mvs_port *port = &mvi->port[task->dev->port->id];
+	struct task_status_struct *tstat;
+	struct mvs_port *port;
 	bool aborted;
 	void *to;
 
+	if (unlikely(!task || !task->lldd_task))
+		return -1;
+
+	mvs_hba_cq_dump(mvi);
+
 	spin_lock(&task->task_state_lock);
 	aborted = task->task_state_flags & SAS_TASK_STATE_ABORTED;
 	if (!aborted) {
@@ -1190,22 +1358,27 @@
 	}
 	spin_unlock(&task->task_state_lock);
 
-	if (aborted)
+	if (aborted) {
+		mvs_slot_task_free(mvi, task, slot, slot_idx);
+		mvs_slot_free(mvi, rx_desc);
 		return -1;
+	}
 
+	port = slot->port;
+	tstat = &task->task_status;
 	memset(tstat, 0, sizeof(*tstat));
 	tstat->resp = SAS_TASK_COMPLETE;
 
-
-	if (unlikely(!port->port_attached)) {
-		tstat->stat = SAS_PHY_DOWN;
+	if (unlikely(!port->port_attached || flags)) {
+		mvs_slot_err(mvi, task, slot_idx);
+		if (!sas_protocol_ata(task->task_proto))
+			tstat->stat = SAS_PHY_DOWN;
 		goto out;
 	}
 
 	/* error info record present */
-	if ((rx_desc & RXQ_ERR) && (*(u64 *) slot->response)) {
-		tstat->stat = SAM_CHECK_COND;
-		mvs_slot_err(mvi, task, slot_idx);
+	if (unlikely((rx_desc & RXQ_ERR) && (*(u64 *) slot->response))) {
+		tstat->stat = mvs_slot_err(mvi, task, slot_idx);
 		goto out;
 	}
 
@@ -1242,21 +1415,7 @@
 	case SAS_PROTOCOL_SATA:
 	case SAS_PROTOCOL_STP:
 	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: {
-			struct ata_task_resp *resp =
-			    (struct ata_task_resp *)tstat->buf;
-
-			if ((rx_desc & (RXQ_DONE | RXQ_ERR | RXQ_ATTN)) ==
-			    RXQ_DONE)
-				tstat->stat = SAM_GOOD;
-			else
-				tstat->stat = SAM_CHECK_COND;
-
-			resp->frame_len = sizeof(struct dev_to_host_fis);
-			memcpy(&resp->ending_fis[0],
-			       SATA_RECEIVED_D2H_FIS(port->taskfileset),
-			       sizeof(struct dev_to_host_fis));
-			if (resp->ending_fis[2] & ATA_ERR)
-				mvs_hexdump(16, resp->ending_fis, 0);
+			tstat->stat = mvs_sata_done(mvi, task, slot_idx, 0);
 			break;
 		}
 
@@ -1266,11 +1425,34 @@
 	}
 
 out:
-	mvs_slot_free(mvi, task, slot, slot_idx);
+	mvs_slot_task_free(mvi, task, slot, slot_idx);
+	if (unlikely(tstat->stat != SAS_QUEUE_FULL))
+		mvs_slot_free(mvi, rx_desc);
+
+	spin_unlock(&mvi->lock);
 	task->task_done(task);
+	spin_lock(&mvi->lock);
 	return tstat->stat;
 }
 
+static void mvs_release_task(struct mvs_info *mvi, int phy_no)
+{
+	struct list_head *pos, *n;
+	struct mvs_slot_info *slot;
+	struct mvs_phy *phy = &mvi->phy[phy_no];
+	struct mvs_port *port = phy->port;
+	u32 rx_desc;
+
+	if (!port)
+		return;
+
+	list_for_each_safe(pos, n, &port->list) {
+		slot = container_of(pos, struct mvs_slot_info, list);
+		rx_desc = (u32) (slot - mvi->slot_info);
+		mvs_slot_complete(mvi, rx_desc, 1);
+	}
+}
+
 static void mvs_int_full(struct mvs_info *mvi)
 {
 	void __iomem *regs = mvi->regs;
@@ -1305,40 +1487,43 @@
 	 * we don't have to stall the CPU reading that register.
 	 * The actual RX ring is offset by one dword, due to this.
 	 */
-	rx_prod_idx = mr32(RX_CONS_IDX) & RX_RING_SZ_MASK;
-	if (rx_prod_idx == 0xfff) {	/* h/w hasn't touched RX ring yet */
-		mvi->rx_cons = 0xfff;
+	rx_prod_idx = mvi->rx_cons;
+	mvi->rx_cons = le32_to_cpu(mvi->rx[0]);
+	if (mvi->rx_cons == 0xfff)	/* h/w hasn't touched RX ring yet */
 		return 0;
-	}
 
 	/* The CMPL_Q may come late, read from register and try again
 	* note: if coalescing is enabled,
 	* it will need to read from register every time for sure
 	*/
 	if (mvi->rx_cons == rx_prod_idx)
-		return 0;
+		mvi->rx_cons = mr32(RX_CONS_IDX) & RX_RING_SZ_MASK;
 
-	if (mvi->rx_cons == 0xfff)
-		mvi->rx_cons = MVS_RX_RING_SZ - 1;
+	if (mvi->rx_cons == rx_prod_idx)
+		return 0;
 
 	while (mvi->rx_cons != rx_prod_idx) {
 
 		/* increment our internal RX consumer pointer */
-		mvi->rx_cons = (mvi->rx_cons + 1) & (MVS_RX_RING_SZ - 1);
+		rx_prod_idx = (rx_prod_idx + 1) & (MVS_RX_RING_SZ - 1);
 
-		rx_desc = le32_to_cpu(mvi->rx[mvi->rx_cons + 1]);
-
-		mvs_hba_cq_dump(mvi);
+		rx_desc = le32_to_cpu(mvi->rx[rx_prod_idx + 1]);
 
 		if (likely(rx_desc & RXQ_DONE))
-			mvs_slot_complete(mvi, rx_desc);
+			mvs_slot_complete(mvi, rx_desc, 0);
 		if (rx_desc & RXQ_ATTN) {
 			attn = true;
 			dev_printk(KERN_DEBUG, &pdev->dev, "ATTN %X\n",
 				rx_desc);
 		} else if (rx_desc & RXQ_ERR) {
+			if (!(rx_desc & RXQ_DONE))
+				mvs_slot_complete(mvi, rx_desc, 0);
 			dev_printk(KERN_DEBUG, &pdev->dev, "RXQ_ERR %X\n",
 				rx_desc);
+		} else if (rx_desc & RXQ_SLOT_RESET) {
+			dev_printk(KERN_DEBUG, &pdev->dev, "Slot reset[%X]\n",
+				rx_desc);
+			mvs_slot_free(mvi, rx_desc);
 		}
 	}
 
@@ -1348,6 +1533,23 @@
 	return 0;
 }
 
+#ifdef MVS_USE_TASKLET
+static void mvs_tasklet(unsigned long data)
+{
+	struct mvs_info *mvi = (struct mvs_info *) data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mvi->lock, flags);
+
+#ifdef MVS_DISABLE_MSI
+	mvs_int_full(mvi);
+#else
+	mvs_int_rx(mvi, true);
+#endif
+	spin_unlock_irqrestore(&mvi->lock, flags);
+}
+#endif
+
 static irqreturn_t mvs_interrupt(int irq, void *opaque)
 {
 	struct mvs_info *mvi = opaque;
@@ -1356,18 +1558,21 @@
 
 	stat = mr32(GBL_INT_STAT);
 
-	/* clear CMD_CMPLT ASAP */
-	mw32_f(INT_STAT, CINT_DONE);
-
 	if (stat == 0 || stat == 0xffffffff)
 		return IRQ_NONE;
 
+	/* clear CMD_CMPLT ASAP */
+	mw32_f(INT_STAT, CINT_DONE);
+
+#ifndef MVS_USE_TASKLET
 	spin_lock(&mvi->lock);
 
 	mvs_int_full(mvi);
 
 	spin_unlock(&mvi->lock);
-
+#else
+	tasklet_schedule(&mvi->tasklet);
+#endif
 	return IRQ_HANDLED;
 }
 
@@ -1376,12 +1581,15 @@
 {
 	struct mvs_info *mvi = opaque;
 
+#ifndef MVS_USE_TASKLET
 	spin_lock(&mvi->lock);
 
 	mvs_int_rx(mvi, true);
 
 	spin_unlock(&mvi->lock);
-
+#else
+	tasklet_schedule(&mvi->tasklet);
+#endif
 	return IRQ_HANDLED;
 }
 #endif
@@ -1576,15 +1784,19 @@
 	return MVS_ID_NOT_MAPPED;
 }
 
-static u32 mvs_get_ncq_tag(struct sas_task *task)
+static u32 mvs_get_ncq_tag(struct sas_task *task, u32 *tag)
 {
-	u32 tag = 0;
 	struct ata_queued_cmd *qc = task->uldd_task;
 
-	if (qc)
-		tag = qc->tag;
+	if (qc) {
+		if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
+			qc->tf.command == ATA_CMD_FPDMA_READ) {
+			*tag = qc->tag;
+			return 1;
+		}
+	}
 
-	return tag;
+	return 0;
 }
 
 static int mvs_task_prep_ata(struct mvs_info *mvi,
@@ -1628,11 +1840,9 @@
 	hdr->flags = cpu_to_le32(flags);
 
 	/* FIXME: the low order order 5 bits for the TAG if enable NCQ */
-	if (task->ata_task.use_ncq) {
-		hdr->tags = cpu_to_le32(mvs_get_ncq_tag(task));
-		/*Fill in task file */
-		task->ata_task.fis.sector_count = hdr->tags << 3;
-	} else
+	if (task->ata_task.use_ncq && mvs_get_ncq_tag(task, &hdr->tags))
+		task->ata_task.fis.sector_count |= hdr->tags << 3;
+	else
 		hdr->tags = cpu_to_le32(tag);
 	hdr->data_len = cpu_to_le32(task->total_xfer_len);
 
@@ -1725,13 +1935,16 @@
 	u32 flags;
 	u32 resp_len, req_len, i, tag = tei->tag;
 	const u32 max_resp_len = SB_RFB_MAX;
+	u8 phy_mask;
 
 	slot = &mvi->slot_info[tag];
 
+	phy_mask = (port->wide_port_phymap) ? port->wide_port_phymap :
+		task->dev->port->phy_mask;
 	slot->tx = mvi->tx_prod;
 	mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | tag |
 				(TXQ_CMD_SSP << TXQ_CMD_SHIFT) |
-				(port->wide_port_phymap << TXQ_PHY_SHIFT));
+				(phy_mask << TXQ_PHY_SHIFT));
 
 	flags = MCH_RETRY;
 	if (task->ssp_task.enable_first_burst) {
@@ -1832,22 +2045,32 @@
 	void __iomem *regs = mvi->regs;
 	struct mvs_task_exec_info tei;
 	struct sas_task *t = task;
+	struct mvs_slot_info *slot;
 	u32 tag = 0xdeadbeef, rc, n_elem = 0;
 	unsigned long flags;
 	u32 n = num, pass = 0;
 
 	spin_lock_irqsave(&mvi->lock, flags);
-
 	do {
+		dev = t->dev;
 		tei.port = &mvi->port[dev->port->id];
 
 		if (!tei.port->port_attached) {
-			struct task_status_struct *ts = &t->task_status;
-			ts->stat = SAS_PHY_DOWN;
-			t->task_done(t);
-			rc = 0;
-			goto exec_exit;
+			if (sas_protocol_ata(t->task_proto)) {
+				rc = SAS_PHY_DOWN;
+				goto out_done;
+			} else {
+				struct task_status_struct *ts = &t->task_status;
+				ts->resp = SAS_TASK_UNDELIVERED;
+				ts->stat = SAS_PHY_DOWN;
+				t->task_done(t);
+				if (n > 1)
+					t = list_entry(t->list.next,
+							struct sas_task, list);
+				continue;
+			}
 		}
+
 		if (!sas_protocol_ata(t->task_proto)) {
 			if (t->num_scatter) {
 				n_elem = pci_map_sg(mvi->pdev, t->scatter,
@@ -1866,9 +2089,10 @@
 		if (rc)
 			goto err_out;
 
-		mvi->slot_info[tag].task = t;
-		mvi->slot_info[tag].n_elem = n_elem;
-		memset(mvi->slot_info[tag].buf, 0, MVS_SLOT_BUF_SZ);
+		slot = &mvi->slot_info[tag];
+		t->lldd_task = NULL;
+		slot->n_elem = n_elem;
+		memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
 		tei.task = t;
 		tei.hdr = &mvi->slot[tag];
 		tei.tag = tag;
@@ -1897,28 +2121,26 @@
 		if (rc)
 			goto err_out_tag;
 
+		slot->task = t;
+		slot->port = tei.port;
+		t->lldd_task = (void *) slot;
+		list_add_tail(&slot->list, &slot->port->list);
 		/* TODO: select normal or high priority */
 
 		spin_lock(&t->task_state_lock);
 		t->task_state_flags |= SAS_TASK_AT_INITIATOR;
 		spin_unlock(&t->task_state_lock);
 
-		if (n == 1) {
-			spin_unlock_irqrestore(&mvi->lock, flags);
-			mw32(TX_PROD_IDX, mvi->tx_prod);
-		}
 		mvs_hba_memory_dump(mvi, tag, t->task_proto);
 
 		++pass;
 		mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
-
-		if (n == 1)
-			break;
-
-		t = list_entry(t->list.next, struct sas_task, list);
+		if (n > 1)
+			t = list_entry(t->list.next, struct sas_task, list);
 	} while (--n);
 
-	return 0;
+	rc = 0;
+	goto out_done;
 
 err_out_tag:
 	mvs_tag_free(mvi, tag);
@@ -1928,7 +2150,7 @@
 		if (n_elem)
 			pci_unmap_sg(mvi->pdev, t->scatter, n_elem,
 				     t->data_dir);
-exec_exit:
+out_done:
 	if (pass)
 		mw32(TX_PROD_IDX, (mvi->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1));
 	spin_unlock_irqrestore(&mvi->lock, flags);
@@ -1937,42 +2159,59 @@
 
 static int mvs_task_abort(struct sas_task *task)
 {
-	int rc = 1;
+	int rc;
 	unsigned long flags;
 	struct mvs_info *mvi = task->dev->port->ha->lldd_ha;
 	struct pci_dev *pdev = mvi->pdev;
+	int tag;
 
 	spin_lock_irqsave(&task->task_state_lock, flags);
 	if (task->task_state_flags & SAS_TASK_STATE_DONE) {
 		rc = TMF_RESP_FUNC_COMPLETE;
+		spin_unlock_irqrestore(&task->task_state_lock, flags);
 		goto out_done;
 	}
 	spin_unlock_irqrestore(&task->task_state_lock, flags);
 
-	/*FIXME*/
-	rc = TMF_RESP_FUNC_COMPLETE;
-
 	switch (task->task_proto) {
 	case SAS_PROTOCOL_SMP:
-		dev_printk(KERN_DEBUG, &pdev->dev, "SMP Abort! ");
+		dev_printk(KERN_DEBUG, &pdev->dev, "SMP Abort! \n");
 		break;
 	case SAS_PROTOCOL_SSP:
-		dev_printk(KERN_DEBUG, &pdev->dev, "SSP Abort! ");
+		dev_printk(KERN_DEBUG, &pdev->dev, "SSP Abort! \n");
 		break;
 	case SAS_PROTOCOL_SATA:
 	case SAS_PROTOCOL_STP:
 	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:{
-		dev_printk(KERN_DEBUG, &pdev->dev, "STP Abort! "
-			"Dump D2H FIS: \n");
+		dev_printk(KERN_DEBUG, &pdev->dev, "STP Abort! \n");
+#if _MV_DUMP
+		dev_printk(KERN_DEBUG, &pdev->dev, "Dump D2H FIS: \n");
 		mvs_hexdump(sizeof(struct host_to_dev_fis),
 				(void *)&task->ata_task.fis, 0);
 		dev_printk(KERN_DEBUG, &pdev->dev, "Dump ATAPI Cmd : \n");
 		mvs_hexdump(16, task->ata_task.atapi_packet, 0);
+#endif
+		spin_lock_irqsave(&task->task_state_lock, flags);
+		if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) {
+			/* TODO */
+			;
+		}
+		spin_unlock_irqrestore(&task->task_state_lock, flags);
 		break;
 	}
 	default:
 		break;
 	}
+
+	if (mvs_find_tag(mvi, task, &tag)) {
+		spin_lock_irqsave(&mvi->lock, flags);
+		mvs_slot_task_free(mvi, task, &mvi->slot_info[tag], tag);
+		spin_unlock_irqrestore(&mvi->lock, flags);
+	}
+	if (!mvs_task_exec(task, 1, GFP_ATOMIC))
+		rc = TMF_RESP_FUNC_COMPLETE;
+	else
+		rc = TMF_RESP_FUNC_FAILED;
 out_done:
 	return rc;
 }
@@ -2001,7 +2240,7 @@
 				  mvi->rx_fis, mvi->rx_fis_dma);
 	if (mvi->rx)
 		dma_free_coherent(&mvi->pdev->dev,
-				  sizeof(*mvi->rx) * MVS_RX_RING_SZ,
+				  sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
 				  mvi->rx, mvi->rx_dma);
 	if (mvi->slot)
 		dma_free_coherent(&mvi->pdev->dev,
@@ -2109,6 +2348,9 @@
 		return NULL;
 
 	spin_lock_init(&mvi->lock);
+#ifdef MVS_USE_TASKLET
+	tasklet_init(&mvi->tasklet, mvs_tasklet, (unsigned long)mvi);
+#endif
 	mvi->pdev = pdev;
 	mvi->chip = chip;
 
@@ -2132,6 +2374,10 @@
 		mvs_phy_init(mvi, i);
 		arr_phy[i] = &mvi->phy[i].sas_phy;
 		arr_port[i] = &mvi->port[i].sas_port;
+		mvi->port[i].taskfileset = MVS_ID_NOT_MAPPED;
+		mvi->port[i].wide_port_phymap = 0;
+		mvi->port[i].port_attached = 0;
+		INIT_LIST_HEAD(&mvi->port[i].list);
 	}
 
 	SHOST_TO_SAS_HA(mvi->shost) = &mvi->sas;
@@ -2148,9 +2394,10 @@
 	mvi->sas.sas_phy = arr_phy;
 	mvi->sas.sas_port = arr_port;
 	mvi->sas.num_phys = chip->n_phy;
-	mvi->sas.lldd_max_execute_num = MVS_CHIP_SLOT_SZ - 1;
+	mvi->sas.lldd_max_execute_num = 1;
 	mvi->sas.lldd_queue_size = MVS_QUEUE_SIZE;
-	mvi->can_queue = (MVS_CHIP_SLOT_SZ >> 1) - 1;
+	mvi->shost->can_queue = MVS_CAN_QUEUE;
+	mvi->shost->cmd_per_lun = MVS_SLOTS / mvi->sas.num_phys;
 	mvi->sas.lldd_ha = mvi;
 	mvi->sas.core.shost = mvi->shost;
 
@@ -2203,11 +2450,11 @@
 	memset(mvi->rx_fis, 0, MVS_RX_FISL_SZ);
 
 	mvi->rx = dma_alloc_coherent(&pdev->dev,
-				     sizeof(*mvi->rx) * MVS_RX_RING_SZ,
+				     sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
 				     &mvi->rx_dma, GFP_KERNEL);
 	if (!mvi->rx)
 		goto err_out;
-	memset(mvi->rx, 0, sizeof(*mvi->rx) * MVS_RX_RING_SZ);
+	memset(mvi->rx, 0, sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1));
 
 	mvi->rx[0] = cpu_to_le32(0xfff);
 	mvi->rx_cons = 0xfff;
@@ -2357,7 +2604,7 @@
 	mvs_cw32(regs, CMD_SAS_CTL0, tmp);
 
 	/* workaround for WDTIMEOUT , set to 550 ms */
-	mvs_cw32(regs, CMD_WD_TIMER, 0xffffff);
+	mvs_cw32(regs, CMD_WD_TIMER, 0x86470);
 
 	/* not to halt for different port op during wideport link change */
 	mvs_cw32(regs, CMD_APP_ERR_CONFIG, 0xffefbf7d);
@@ -2465,17 +2712,16 @@
 {
 	u32 tmp;
 	struct mvs_phy *phy = &mvi->phy[i];
-	struct mvs_port *port;
+	struct mvs_port *port = phy->port;;
 
 	tmp = mvs_read_phy_ctl(mvi, i);
 
 	if ((tmp & PHY_READY_MASK) && !(phy->irq_status & PHYEV_POOF)) {
-		if (!phy->port)
+		if (!port)
 			phy->phy_attached = 1;
 		return tmp;
 	}
 
-	port = phy->port;
 	if (port) {
 		if (phy->phy_type & PORT_TYPE_SAS) {
 			port->wide_port_phymap &= ~(1U << i);
@@ -2497,7 +2743,7 @@
 {
 	struct mvs_phy *phy = &mvi->phy[i];
 	struct pci_dev *pdev = mvi->pdev;
-	u32 tmp, j;
+	u32 tmp;
 	u64 tmp64;
 
 	mvs_write_port_cfg_addr(mvi, i, PHYR_IDENTIFY);
@@ -2524,46 +2770,20 @@
 		sas_phy->linkrate =
 			(phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
 				PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET;
-
-		/* Updated attached_sas_addr */
-		mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_HI);
-		phy->att_dev_sas_addr =
-				(u64) mvs_read_port_cfg_data(mvi, i) << 32;
-
-		mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_LO);
-		phy->att_dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
-
-		dev_printk(KERN_DEBUG, &pdev->dev,
-			"phy[%d] Get Attached Address 0x%llX ,"
-			" SAS Address 0x%llX\n",
-			i, phy->att_dev_sas_addr, phy->dev_sas_addr);
-		dev_printk(KERN_DEBUG, &pdev->dev,
-			"Rate = %x , type = %d\n",
-			sas_phy->linkrate, phy->phy_type);
-
-#if 1
-		/*
-		* If the device is capable of supporting a wide port
-		* on its phys, it may configure the phys as a wide port.
-		*/
-		if (phy->phy_type & PORT_TYPE_SAS)
-			for (j = 0; j < mvi->chip->n_phy && j != i; ++j) {
-				if ((mvi->phy[j].phy_attached) &&
-					(mvi->phy[j].phy_type & PORT_TYPE_SAS))
-					if (phy->att_dev_sas_addr ==
-					mvi->phy[j].att_dev_sas_addr - 1) {
-						phy->att_dev_sas_addr =
-						mvi->phy[j].att_dev_sas_addr;
-						break;
-					}
-			}
-
-#endif
-
-		tmp64 = cpu_to_be64(phy->att_dev_sas_addr);
-		memcpy(sas_phy->attached_sas_addr, &tmp64, SAS_ADDR_SIZE);
+		phy->minimum_linkrate =
+			(phy->phy_status &
+				PHY_MIN_SPP_PHYS_LINK_RATE_MASK) >> 8;
+		phy->maximum_linkrate =
+			(phy->phy_status &
+				PHY_MAX_SPP_PHYS_LINK_RATE_MASK) >> 12;
 
 		if (phy->phy_type & PORT_TYPE_SAS) {
+			/* Updated attached_sas_addr */
+			mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_HI);
+			phy->att_dev_sas_addr =
+				(u64) mvs_read_port_cfg_data(mvi, i) << 32;
+			mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_LO);
+			phy->att_dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
 			mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_DEV_INFO);
 			phy->att_dev_info = mvs_read_port_cfg_data(mvi, i);
 			phy->identify.device_type =
@@ -2582,6 +2802,7 @@
 		} else if (phy->phy_type & PORT_TYPE_SATA) {
 			phy->identify.target_port_protocols = SAS_PROTOCOL_STP;
 			if (mvs_is_sig_fis_received(phy->irq_status)) {
+				phy->att_dev_sas_addr = i;	/* temp */
 				if (phy_st & PHY_OOB_DTCTD)
 					sas_phy->oob_mode = SATA_OOB_MODE;
 				phy->frame_rcvd_size =
@@ -2591,20 +2812,34 @@
 			} else {
 				dev_printk(KERN_DEBUG, &pdev->dev,
 					"No sig fis\n");
+				phy->phy_type &= ~(PORT_TYPE_SATA);
+				goto out_done;
 			}
 		}
+		tmp64 = cpu_to_be64(phy->att_dev_sas_addr);
+		memcpy(sas_phy->attached_sas_addr, &tmp64, SAS_ADDR_SIZE);
+
+		dev_printk(KERN_DEBUG, &pdev->dev,
+			"phy[%d] Get Attached Address 0x%llX ,"
+			" SAS Address 0x%llX\n",
+			i, phy->att_dev_sas_addr, phy->dev_sas_addr);
+		dev_printk(KERN_DEBUG, &pdev->dev,
+			"Rate = %x , type = %d\n",
+			sas_phy->linkrate, phy->phy_type);
+
 		/* workaround for HW phy decoding error on 1.5g disk drive */
 		mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE6);
 		tmp = mvs_read_port_vsr_data(mvi, i);
 		if (((phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
 		     PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET) ==
 			SAS_LINK_RATE_1_5_GBPS)
-			tmp &= ~PHY_MODE6_DTL_SPEED;
+			tmp &= ~PHY_MODE6_LATECLK;
 		else
-			tmp |= PHY_MODE6_DTL_SPEED;
+			tmp |= PHY_MODE6_LATECLK;
 		mvs_write_port_vsr_data(mvi, i, tmp);
 
 	}
+out_done:
 	if (get_st)
 		mvs_write_port_irq_stat(mvi, i, phy->irq_status);
 }
@@ -2629,6 +2864,11 @@
 	spin_unlock_irqrestore(&mvi->lock, flags);
 }
 
+static int mvs_I_T_nexus_reset(struct domain_device *dev)
+{
+	return TMF_RESP_FUNC_FAILED;
+}
+
 static int __devinit mvs_hw_init(struct mvs_info *mvi)
 {
 	void __iomem *regs = mvi->regs;
@@ -2790,13 +3030,12 @@
 	/* enable CMD/CMPL_Q/RESP mode */
 	mw32(PCS, PCS_SATA_RETRY | PCS_FIS_RX_EN | PCS_CMD_EN);
 
-	/* re-enable interrupts globally */
-	mvs_hba_interrupt_enable(mvi);
-
 	/* enable completion queue interrupt */
-	tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM);
+	tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM | CINT_SRS);
 	mw32(INT_MASK, tmp);
 
+	/* Enable SRS interrupt */
+	mw32(INT_MASK_SRS, 0xFF);
 	return 0;
 }
 
@@ -2870,6 +3109,8 @@
 
 	mvs_print_info(mvi);
 
+	mvs_hba_interrupt_enable(mvi);
+
 	scsi_scan_host(mvi->shost);
 
 	return 0;
@@ -2915,12 +3156,22 @@
 	.lldd_execute_task	= mvs_task_exec,
 	.lldd_control_phy	= mvs_phy_control,
 	.lldd_abort_task	= mvs_task_abort,
-	.lldd_port_formed	= mvs_port_formed
+	.lldd_port_formed	= mvs_port_formed,
+	.lldd_I_T_nexus_reset	= mvs_I_T_nexus_reset,
 };
 
 static struct pci_device_id __devinitdata mvs_pci_table[] = {
 	{ PCI_VDEVICE(MARVELL, 0x6320), chip_6320 },
 	{ PCI_VDEVICE(MARVELL, 0x6340), chip_6440 },
+	{
+		.vendor 	= PCI_VENDOR_ID_MARVELL,
+		.device 	= 0x6440,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= 0x6480,
+		.class		= 0,
+		.class_mask	= 0,
+		.driver_data	= chip_6480,
+	},
 	{ PCI_VDEVICE(MARVELL, 0x6440), chip_6440 },
 	{ PCI_VDEVICE(MARVELL, 0x6480), chip_6480 },
 
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index e5c6f6a..c78b836 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -181,6 +181,18 @@
 	cmd = kmem_cache_alloc(shost->cmd_pool->cmd_slab,
 			       gfp_mask | shost->cmd_pool->gfp_mask);
 
+	if (likely(cmd)) {
+		buf = kmem_cache_alloc(shost->cmd_pool->sense_slab,
+				       gfp_mask | shost->cmd_pool->gfp_mask);
+		if (likely(buf)) {
+			memset(cmd, 0, sizeof(*cmd));
+			cmd->sense_buffer = buf;
+		} else {
+			kmem_cache_free(shost->cmd_pool->cmd_slab, cmd);
+			cmd = NULL;
+		}
+	}
+
 	if (unlikely(!cmd)) {
 		unsigned long flags;
 
@@ -197,16 +209,6 @@
 			memset(cmd, 0, sizeof(*cmd));
 			cmd->sense_buffer = buf;
 		}
-	} else {
-		buf = kmem_cache_alloc(shost->cmd_pool->sense_slab,
-				       gfp_mask | shost->cmd_pool->gfp_mask);
-		if (likely(buf)) {
-			memset(cmd, 0, sizeof(*cmd));
-			cmd->sense_buffer = buf;
-		} else {
-			kmem_cache_free(shost->cmd_pool->cmd_slab, cmd);
-			cmd = NULL;
-		}
 	}
 
 	return cmd;
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index b9b09a7..ed83cdb 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -294,7 +294,6 @@
 	}
 
 	if (sdev->request_queue) {
-		bsg_unregister_queue(sdev->request_queue);
 		sdev->request_queue->queuedata = NULL;
 		/* user context needed to free queue */
 		scsi_free_queue(sdev->request_queue);
@@ -858,6 +857,7 @@
 	if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
 		return;
 
+	bsg_unregister_queue(sdev->request_queue);
 	class_device_unregister(&sdev->sdev_classdev);
 	transport_remove_device(dev);
 	device_del(dev);
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index a8bec49..f97224c 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -1214,13 +1214,6 @@
 		.base_baud	= 115200,
 		.uart_offset	= 8,
 	},
-	[pbn_b0_8_115200] = {
-		.flags		= FL_BASE0,
-		.num_ports	= 8,
-		.base_baud	= 115200,
-		.uart_offset	= 8,
-	},
-
 	[pbn_b0_1_921600] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 1,
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index d57bf3e..430997e 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -96,6 +96,7 @@
 
  /* PDC registers */
 #define UART_PUT_PTCR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
+#define UART_GET_TCR(port)      __raw_readl((port)->membase + ATMEL_PDC_TCR)
 #define UART_GET_PTSR(port)	__raw_readl((port)->membase + ATMEL_PDC_PTSR)
 
 #define UART_PUT_RPR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_RPR)
@@ -106,6 +107,7 @@
 
 #define UART_PUT_TPR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_TPR)
 #define UART_PUT_TCR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
+#define UART_GET_TCR(port)	__raw_readl((port)->membase + ATMEL_PDC_TCR)
 
 static int (*atmel_open_hook)(struct uart_port *);
 static void (*atmel_close_hook)(struct uart_port *);
@@ -562,17 +564,22 @@
 	struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
 	int count;
 
+	/* nothing left to transmit? */
+	if (UART_GET_TCR(port))
+		return;
+
 	xmit->tail += pdc->ofs;
 	xmit->tail &= UART_XMIT_SIZE - 1;
 
 	port->icount.tx += pdc->ofs;
 	pdc->ofs = 0;
 
-	if (!uart_circ_empty(xmit)) {
-		/* more to transmit - setup next transfer */
+	/* more to transmit - setup next transfer */
 
-		/* disable PDC transmit */
-		UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+	/* disable PDC transmit */
+	UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+
+	if (!uart_circ_empty(xmit)) {
 		dma_sync_single_for_device(port->dev,
 					   pdc->dma_addr,
 					   pdc->dma_size,
@@ -586,11 +593,6 @@
 		/* re-enable PDC transmit and interrupts */
 		UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
 		UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
-	} else {
-		/* nothing left to transmit - disable the transmitter */
-
-		/* disable PDC transmit */
-		UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
 	}
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -1274,6 +1276,7 @@
 {
 	struct uart_port *port = &atmel_ports[co->index].uart;
 	unsigned int status, imr;
+	unsigned int pdc_tx;
 
 	/*
 	 * First, save IMR and then disable interrupts
@@ -1281,6 +1284,10 @@
 	imr = UART_GET_IMR(port);
 	UART_PUT_IDR(port, ATMEL_US_RXRDY | ATMEL_US_TXRDY);
 
+	/* Store PDC transmit status and disable it */
+	pdc_tx = UART_GET_PTSR(port) & ATMEL_PDC_TXTEN;
+	UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+
 	uart_console_write(port, s, count, atmel_console_putchar);
 
 	/*
@@ -1290,6 +1297,11 @@
 	do {
 		status = UART_GET_CSR(port);
 	} while (!(status & ATMEL_US_TXRDY));
+
+	/* Restore PDC transmit status */
+	if (pdc_tx)
+		UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
+
 	/* set interrupts back the way they were */
 	UART_PUT_IER(port, imr);
 }
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 85687aa..1749a27 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -863,3 +863,4 @@
 MODULE_DESCRIPTION("Atmel AT32/AT91 SPI Controller driver");
 MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:atmel_spi");
diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c
index 41a3d00..072c4a5 100644
--- a/drivers/spi/au1550_spi.c
+++ b/drivers/spi/au1550_spi.c
@@ -958,6 +958,9 @@
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:au1550-spi");
+
 static struct platform_driver au1550_spi_drv = {
 	.remove = __exit_p(au1550_spi_remove),
 	.driver = {
diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
index a86315a..90729469 100644
--- a/drivers/spi/mpc52xx_psc_spi.c
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -500,6 +500,9 @@
 	return mpc52xx_psc_spi_do_remove(&dev->dev);
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:mpc52xx-psc-spi");
+
 static struct platform_driver mpc52xx_psc_spi_platform_driver = {
 	.remove = __exit_p(mpc52xx_psc_spi_remove),
 	.driver = {
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index a6ba11a..b1cc148 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -1084,6 +1084,9 @@
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:omap2_mcspi");
+
 static struct platform_driver omap2_mcspi_driver = {
 	.driver = {
 		.name =		"omap2_mcspi",
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
index 8245b51..5f00bd6 100644
--- a/drivers/spi/omap_uwire.c
+++ b/drivers/spi/omap_uwire.c
@@ -537,10 +537,12 @@
 	return status;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:omap_uwire");
+
 static struct platform_driver uwire_driver = {
 	.driver = {
 		.name		= "omap_uwire",
-		.bus		= &platform_bus_type,
 		.owner		= THIS_MODULE,
 	},
 	.remove		= __exit_p(uwire_remove),
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 59deed7..147e26a 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -44,6 +44,7 @@
 MODULE_AUTHOR("Stephen Street");
 MODULE_DESCRIPTION("PXA2xx SSP SPI Controller");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa2xx-spi");
 
 #define MAX_BUSES 3
 
@@ -1581,7 +1582,6 @@
 static struct platform_driver driver = {
 	.driver = {
 		.name = "pxa2xx-spi",
-		.bus = &platform_bus_type,
 		.owner = THIS_MODULE,
 	},
 	.remove = pxa2xx_spi_remove,
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index d853fceb..a9ac1fd 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -713,8 +713,8 @@
 	} else {
 		drv_data->len = transfer->len;
 	}
-	dev_dbg(&drv_data->pdev->dev, "transfer: ",
-		"drv_data->write is %p, chip->write is %p, null_wr is %p\n",
+	dev_dbg(&drv_data->pdev->dev,
+		"transfer: drv_data->write is %p, chip->write is %p, null_wr is %p\n",
 		drv_data->write, chip->write, null_writer);
 
 	/* speed and width has been set on per message */
@@ -1294,6 +1294,12 @@
 		goto out_error_queue_alloc;
 	}
 
+	status = peripheral_request_list(drv_data->pin_req, DRV_NAME);
+	if (status != 0) {
+		dev_err(&pdev->dev, ": Requesting Peripherals failed\n");
+		goto out_error_queue_alloc;
+	}
+
 	/* Register with the SPI framework */
 	platform_set_drvdata(pdev, drv_data);
 	status = spi_register_master(master);
@@ -1302,12 +1308,6 @@
 		goto out_error_queue_alloc;
 	}
 
-	status = peripheral_request_list(drv_data->pin_req, DRV_NAME);
-	if (status != 0) {
-		dev_err(&pdev->dev, ": Requesting Peripherals failed\n");
-		goto out_error;
-	}
-
 	dev_info(dev, "%s, Version %s, regs_base@%p, dma channel@%d\n",
 		DRV_DESC, DRV_VERSION, drv_data->regs_base,
 		drv_data->dma_channel);
@@ -1319,7 +1319,6 @@
 	iounmap((void *) drv_data->regs_base);
 out_error_ioremap:
 out_error_get_res:
-out_error:
 	spi_master_put(master);
 
 	return status;
@@ -1397,7 +1396,7 @@
 #define bfin5xx_spi_resume NULL
 #endif				/* CONFIG_PM */
 
-MODULE_ALIAS("bfin-spi-master");	/* for platform bus hotplug */
+MODULE_ALIAS("platform:bfin-spi");
 static struct platform_driver bfin5xx_spi_driver = {
 	.driver	= {
 		.name	= DRV_NAME,
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 1b06471..d4ba640 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -1722,10 +1722,12 @@
 #define spi_imx_resume NULL
 #endif /* CONFIG_PM */
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:spi_imx");
+
 static struct platform_driver driver = {
 	.driver = {
 		.name = "spi_imx",
-		.bus = &platform_bus_type,
 		.owner = THIS_MODULE,
 	},
 	.remove = __exit_p(spi_imx_remove),
diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
index 04f7cd9..be15a62 100644
--- a/drivers/spi/spi_mpc83xx.c
+++ b/drivers/spi/spi_mpc83xx.c
@@ -523,11 +523,12 @@
 	return 0;
 }
 
-MODULE_ALIAS("mpc83xx_spi");			/* for platform bus hotplug */
+MODULE_ALIAS("platform:mpc83xx_spi");
 static struct platform_driver mpc83xx_spi_driver = {
 	.remove = __exit_p(mpc83xx_spi_remove),
 	.driver = {
-		   .name = "mpc83xx_spi",
+		.name = "mpc83xx_spi",
+		.owner = THIS_MODULE,
 	},
 };
 
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index 6e834b8b..e75103a 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -415,7 +415,7 @@
 #define s3c24xx_spi_resume  NULL
 #endif
 
-MODULE_ALIAS("s3c2410_spi");			/* for platform bus hotplug */
+MODULE_ALIAS("platform:s3c2410-spi");
 static struct platform_driver s3c24xx_spidrv = {
 	.remove		= __exit_p(s3c24xx_spi_remove),
 	.suspend	= s3c24xx_spi_suspend,
diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c
index 82ae7d7..e33f6145 100644
--- a/drivers/spi/spi_s3c24xx_gpio.c
+++ b/drivers/spi/spi_s3c24xx_gpio.c
@@ -168,6 +168,8 @@
 #define s3c2410_spigpio_suspend NULL
 #define s3c2410_spigpio_resume NULL
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:spi_s3c24xx_gpio");
 
 static struct platform_driver s3c2410_spigpio_drv = {
 	.probe		= s3c2410_spigpio_probe,
diff --git a/drivers/spi/spi_sh_sci.c b/drivers/spi/spi_sh_sci.c
index 3dbe71b..7d36720 100644
--- a/drivers/spi/spi_sh_sci.c
+++ b/drivers/spi/spi_sh_sci.c
@@ -203,3 +203,4 @@
 MODULE_DESCRIPTION("SH SCI SPI Driver");
 MODULE_AUTHOR("Magnus Damm <damm@opensource.se>");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:spi_sh_sci");
diff --git a/drivers/spi/spi_txx9.c b/drivers/spi/spi_txx9.c
index 363ac8e..2296f37 100644
--- a/drivers/spi/spi_txx9.c
+++ b/drivers/spi/spi_txx9.c
@@ -450,6 +450,9 @@
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:spi_txx9");
+
 static struct platform_driver txx9spi_driver = {
 	.remove = __exit_p(txx9spi_remove),
 	.driver = {
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 5d04f52..cf6aef3 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -408,6 +408,9 @@
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:" XILINX_SPI_NAME);
+
 static struct platform_driver xilinx_spi_driver = {
 	.probe	= xilinx_spi_probe,
 	.remove	= __devexit_p(xilinx_spi_remove),
diff --git a/drivers/ssb/driver_mipscore.c b/drivers/ssb/driver_mipscore.c
index 3d3dd32..a9e7eb4 100644
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -109,12 +109,13 @@
 		clear_irq(bus, oldirq);
 
 	/* assign the new one */
-	if (irq == 0)
-		ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)));
-
-	irqflag <<= ipsflag_irq_shift[irq];
-	irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]);
-	ssb_write32(mdev, SSB_IPSFLAG, irqflag);
+	if (irq == 0) {
+		ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC)));
+	} else {
+		irqflag <<= ipsflag_irq_shift[irq];
+		irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]);
+		ssb_write32(mdev, SSB_IPSFLAG, irqflag);
+	}
 }
 
 static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 74b9a8a..5d777f2 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -551,7 +551,7 @@
 		} else {
 			tmp = ssb_read32(dev, SSB_TPSFLAG);
 			tmp &= SSB_TPSFLAG_BPFLAG;
-			intvec |= tmp;
+			intvec |= (1 << tmp);
 		}
 		ssb_write32(pdev, SSB_INTVEC, intvec);
 	}
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index bedb2b4..72017bf 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -1044,6 +1044,12 @@
 		goto out;
 
 	cc = &bus->chipco;
+
+	if (!cc->dev)
+		goto out;
+	if (cc->dev->id.revision < 5)
+		goto out;
+
 	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
 	err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
 	if (err)
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index a83e8b7..fd15ced 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1884,3 +1884,4 @@
 MODULE_DESCRIPTION("AT91 udc driver");
 MODULE_AUTHOR("Thomas Rathbone, David Brownell");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at91_udc");
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index af8b2a3..b0db4c3 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -2054,6 +2054,7 @@
 	.remove		= __exit_p(usba_udc_remove),
 	.driver		= {
 		.name		= "atmel_usba_udc",
+		.owner		= THIS_MODULE,
 	},
 };
 
@@ -2072,3 +2073,4 @@
 MODULE_DESCRIPTION("Atmel USBA UDC driver");
 MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:atmel_usba_udc");
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index 63e8fa3..254012a 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -2475,3 +2475,4 @@
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:fsl-usb2-udc");
diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c
index 37243ef..078f724 100644
--- a/drivers/usb/gadget/lh7a40x_udc.c
+++ b/drivers/usb/gadget/lh7a40x_udc.c
@@ -2146,3 +2146,4 @@
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR("Mikko Lahteenmaki, Bo Henriksen");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lh7a40x_udc");
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 835948f..ee6b35f 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -35,6 +35,7 @@
 MODULE_DESCRIPTION("M66592 USB gadget driver");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Yoshihiro Shimoda");
+MODULE_ALIAS("platform:m66592_udc");
 
 #define DRIVER_VERSION	"18 Oct 2007"
 
@@ -1671,6 +1672,7 @@
 	.remove =	__exit_p(m66592_remove),
 	.driver		= {
 		.name =	(char *) udc_name,
+		.owner	= THIS_MODULE,
 	},
 };
 
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index e6d68bd..ee1e9a3 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -3109,4 +3109,4 @@
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
-
+MODULE_ALIAS("platform:omap_udc");
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index 096c41cc..c00cd8b 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -2380,4 +2380,4 @@
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell");
 MODULE_LICENSE("GPL");
-
+MODULE_ALIAS("platform:pxa2xx-udc");
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index aadc420..6b1ef48 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -2047,3 +2047,5 @@
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c2410-usbgadget");
+MODULE_ALIAS("platform:s3c2440-usbgadget");
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 40e8240..4e065e5 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -135,8 +135,6 @@
 		hcd->state = HC_STATE_QUIESCING;
 	}
 	ehci->command = ehci_readl(ehci, &ehci->regs->command);
-	if (ehci->reclaim)
-		end_unlink_async(ehci);
 	ehci_work(ehci);
 
 	/* Unlike other USB host controller types, EHCI doesn't have
@@ -180,6 +178,9 @@
 	ehci_halt (ehci);
 	hcd->state = HC_STATE_SUSPENDED;
 
+	if (ehci->reclaim)
+		end_unlink_async(ehci);
+
 	/* allow remote wakeup */
 	mask = INTR_MASK;
 	if (!device_may_wakeup(&hcd->self.root_hub->dev))
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index d7071c8..203a335 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -1684,14 +1684,18 @@
 
 #endif
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:isp116x-hcd");
+
 static struct platform_driver isp116x_driver = {
 	.probe = isp116x_probe,
 	.remove = isp116x_remove,
 	.suspend = isp116x_suspend,
 	.resume = isp116x_resume,
 	.driver = {
-		   .name = (char *)hcd_name,
-		   },
+		.name = (char *)hcd_name,
+		.owner	= THIS_MODULE,
+	},
 };
 
 /*-----------------------------------------------------------------*/
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 126fcbd..d72dc07 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -355,7 +355,7 @@
 #define ohci_hcd_at91_drv_resume  NULL
 #endif
 
-MODULE_ALIAS("at91_ohci");
+MODULE_ALIAS("platform:at91_ohci");
 
 static struct platform_driver ohci_hcd_at91_driver = {
 	.probe		= ohci_hcd_at91_drv_probe,
@@ -368,4 +368,3 @@
 		.owner	= THIS_MODULE,
 	},
 };
-
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 663a060..f90fe0c 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -345,3 +345,4 @@
 	},
 };
 
+MODULE_ALIAS("platform:au1xxx-ohci");
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index a68ce9d..156e93a 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -211,6 +211,8 @@
 #endif
 	.driver		= {
 		.name	= "ep93xx-ohci",
+		.owner	= THIS_MODULE,
 	},
 };
 
+MODULE_ALIAS("platform:ep93xx-ohci");
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index dd4798e..33f1c1c 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -467,7 +467,7 @@
 out:
 	kfree(seen);
 	if (ohci->eds_scheduled)
-		mod_timer(&ohci->unlink_watchdog, round_jiffies_relative(HZ));
+		mod_timer(&ohci->unlink_watchdog, round_jiffies(jiffies + HZ));
 done:
 	spin_unlock_irqrestore(&ohci->lock, flags);
 }
diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c
index 4a043ab..13c12ed 100644
--- a/drivers/usb/host/ohci-lh7a404.c
+++ b/drivers/usb/host/ohci-lh7a404.c
@@ -251,3 +251,4 @@
 	},
 };
 
+MODULE_ALIAS("platform:lh7a404-ohci");
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 74e1f4b..7bfca1e 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -544,3 +544,4 @@
 	},
 };
 
+MODULE_ALIAS("platform:ohci");
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index 6c52c66..28b458f2 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -456,9 +456,13 @@
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:usb-ohci");
+
 static struct platform_driver usb_hcd_pnx4008_driver = {
 	.driver = {
 		.name = "usb-ohci",
+		.owner	= THIS_MODULE,
 	},
 	.probe = usb_hcd_pnx4008_probe,
 	.remove = usb_hcd_pnx4008_remove,
diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c
index 85fdfd2..605d59c 100644
--- a/drivers/usb/host/ohci-pnx8550.c
+++ b/drivers/usb/host/ohci-pnx8550.c
@@ -230,11 +230,12 @@
 	return 0;
 }
 
-MODULE_ALIAS("pnx8550-ohci");
+MODULE_ALIAS("platform:pnx8550-ohci");
 
 static struct platform_driver ohci_hcd_pnx8550_driver = {
 	.driver = {
-		.name		= "pnx8550-ohci",
+		.name	= "pnx8550-ohci",
+		.owner	= THIS_MODULE,
 	},
 	.probe		= ohci_hcd_pnx8550_drv_probe,
 	.remove		= ohci_hcd_pnx8550_drv_remove,
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index f95be189..523c301 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -213,3 +213,4 @@
 	},
 };
 
+MODULE_ALIAS("platform:ppc-soc-ohci");
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index ff9a798..8ad9b3b 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -364,6 +364,8 @@
 }
 #endif
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:pxa27x-ohci");
 
 static struct platform_driver ohci_hcd_pxa27x_driver = {
 	.probe		= ohci_hcd_pxa27x_drv_probe,
@@ -375,6 +377,7 @@
 #endif
 	.driver		= {
 		.name	= "pxa27x-ohci",
+		.owner	= THIS_MODULE,
 	},
 };
 
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 5181732..9c9f3b5 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -169,7 +169,7 @@
 	if (quirk_zfmicro(ohci)
 			&& (ed->type == PIPE_INTERRUPT)
 			&& !(ohci->eds_scheduled++))
-		mod_timer(&ohci->unlink_watchdog, round_jiffies_relative(HZ));
+		mod_timer(&ohci->unlink_watchdog, round_jiffies(jiffies + HZ));
 	wmb ();
 
 	/* we care about rm_list when setting CLE/BLE in case the HC was at
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 44b79e8..ead4772 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -501,3 +501,4 @@
 	},
 };
 
+MODULE_ALIAS("platform:s3c2410-ohci");
diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c
index 5309ac0..e7ee607 100644
--- a/drivers/usb/host/ohci-sh.c
+++ b/drivers/usb/host/ohci-sh.c
@@ -141,3 +141,4 @@
 	},
 };
 
+MODULE_ALIAS("platform:sh_ohci");
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c
index a970701..4ea92762 100644
--- a/drivers/usb/host/ohci-sm501.c
+++ b/drivers/usb/host/ohci-sm501.c
@@ -262,3 +262,4 @@
 		.name	= "sm501-usb",
 	},
 };
+MODULE_ALIAS("platform:sm501-usb");
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 0ce2fc5..9f80e52 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -44,6 +44,7 @@
 MODULE_DESCRIPTION("R8A66597 USB Host Controller Driver");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Yoshihiro Shimoda");
+MODULE_ALIAS("platform:r8a66597_hcd");
 
 #define DRIVER_VERSION	"29 May 2007"
 
@@ -2219,6 +2220,7 @@
 	.resume =	r8a66597_resume,
 	.driver		= {
 		.name = (char *) hcd_name,
+		.owner	= THIS_MODULE,
 	},
 };
 
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 59be276..629bca0 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -58,6 +58,7 @@
 
 MODULE_DESCRIPTION("SL811HS USB Host Controller Driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sl811-hcd");
 
 #define DRIVER_VERSION	"19 May 2005"
 
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 3033d69..8e117a7 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -3316,3 +3316,4 @@
 
 module_exit(u132_hcd_exit);
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:u132_hcd");
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index da922df..b6b5b2a 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -378,6 +378,7 @@
 	sg = kmalloc (nents * sizeof *sg, GFP_KERNEL);
 	if (!sg)
 		return NULL;
+	sg_init_table(sg, nents);
 
 	for (i = 0; i < nents; i++) {
 		char		*buf;
@@ -390,7 +391,7 @@
 		}
 
 		/* kmalloc pages are always physically contiguous! */
-		sg_init_one(&sg[i], buf, size);
+		sg_set_buf(&sg[i], buf, size);
 
 		switch (pattern) {
 		case 0:
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index f3ca660..324bb61 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -75,6 +75,7 @@
 	{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
 	{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
 	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
+	{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 8a0d174..74ce8bc 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -637,6 +637,7 @@
 	.description		= "Keyspan - (without firmware)",
 	.id_table		= keyspan_pre_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
+	.num_interrupt_out	= NUM_DONT_CARE,
 	.num_bulk_in		= NUM_DONT_CARE,
 	.num_bulk_out		= NUM_DONT_CARE,
 	.num_ports		= 1,
@@ -651,6 +652,7 @@
 	.description		= "Keyspan 1 port adapter",
 	.id_table		= keyspan_1port_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
+	.num_interrupt_out	= NUM_DONT_CARE,
 	.num_bulk_in		= NUM_DONT_CARE,
 	.num_bulk_out		= NUM_DONT_CARE,
 	.num_ports		= 1,
@@ -678,6 +680,7 @@
 	.description		= "Keyspan 2 port adapter",
 	.id_table		= keyspan_2port_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
+	.num_interrupt_out	= NUM_DONT_CARE,
 	.num_bulk_in		= NUM_DONT_CARE,
 	.num_bulk_out		= NUM_DONT_CARE,
 	.num_ports		= 2,
@@ -705,6 +708,7 @@
 	.description		= "Keyspan 4 port adapter",
 	.id_table		= keyspan_4port_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
+	.num_interrupt_out	= NUM_DONT_CARE,
 	.num_bulk_in		= NUM_DONT_CARE,
 	.num_bulk_out		= NUM_DONT_CARE,
 	.num_ports		= 4,
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index b517f93..e3d241f 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -265,8 +265,8 @@
 	.description		= "TI USB 3410 1 port adapter",
 	.usb_driver		= &ti_usb_driver,
 	.id_table		= ti_id_table_3410,
-	.num_interrupt_in	= 1,
-	.num_bulk_in		= 1,
+	.num_interrupt_in	= NUM_DONT_CARE,
+	.num_bulk_in		= NUM_DONT_CARE,
 	.num_bulk_out		= 1,
 	.num_ports		= 1,
 	.attach			= ti_startup,
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 22b3f78..c2b01f7 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -191,7 +191,7 @@
 	.id_table =		id_table,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		2,
-	.num_bulk_out =		2,
+	.num_bulk_out =		NUM_DONT_CARE,
 	.num_ports =		2,
 	.open =			visor_open,
 	.close =		visor_close,
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index 986a550..eefba3d 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -384,7 +384,7 @@
 	 *   Other flags can be set, and are documented in
 	 *   include/linux/mm.h
 	 */
-	vma->vm_flags |= VM_MAYSHARE;
+	vma->vm_flags |=  VM_MAYSHARE | VM_SHARED;
 
 	return 0;
 }
diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c
index a2bb2de..135d6dd 100644
--- a/drivers/video/bfin-t350mcqb-fb.c
+++ b/drivers/video/bfin-t350mcqb-fb.c
@@ -91,6 +91,7 @@
 	int lq043_open_cnt;
 	int irq;
 	spinlock_t lock;	/* lock */
+	u32 pseudo_pal[16];
 };
 
 static int nocursor;
@@ -182,13 +183,13 @@
 
 }
 
-static int bfin_t350mcqb_request_ports(int action)
-{
-	u16 ppi0_req_8[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+static	u16 ppi0_req_8[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
 			    P_PPI0_D0, P_PPI0_D1, P_PPI0_D2,
 			    P_PPI0_D3, P_PPI0_D4, P_PPI0_D5,
 			    P_PPI0_D6, P_PPI0_D7, 0};
 
+static int bfin_t350mcqb_request_ports(int action)
+{
 	if (action) {
 		if (peripheral_request_list(ppi0_req_8, DRIVER_NAME)) {
 			printk(KERN_ERR "Requesting Peripherals faild\n");
@@ -301,7 +302,7 @@
 	 *   Other flags can be set, and are documented in
 	 *   include/linux/mm.h
 	 */
-	vma->vm_flags |= VM_MAYSHARE;
+	vma->vm_flags |= VM_MAYSHARE | VM_SHARED;
 
 	return 0;
 }
@@ -520,16 +521,7 @@
 
 	fbinfo->fbops = &bfin_t350mcqb_fb_ops;
 
-	fbinfo->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL);
-	if (!fbinfo->pseudo_palette) {
-		printk(KERN_ERR DRIVER_NAME
-		       "Fail to allocate pseudo_palette\n");
-
-		ret = -ENOMEM;
-		goto out4;
-	}
-
-	memset(fbinfo->pseudo_palette, 0, sizeof(u32) * 16);
+	fbinfo->pseudo_palette = &info->pseudo_pal;
 
 	if (fb_alloc_cmap(&fbinfo->cmap, BFIN_LCD_NBR_PALETTE_ENTRIES, 0)
 	    < 0) {
@@ -537,7 +529,7 @@
 		       "Fail to allocate colormap (%d entries)\n",
 		       BFIN_LCD_NBR_PALETTE_ENTRIES);
 		ret = -EFAULT;
-		goto out5;
+		goto out4;
 	}
 
 	if (bfin_t350mcqb_request_ports(1)) {
@@ -552,11 +544,11 @@
 		goto out7;
 	}
 
-	if (request_irq(info->irq, (void *)bfin_t350mcqb_irq_error, IRQF_DISABLED,
-			"PPI ERROR", info) < 0) {
+	ret = request_irq(info->irq, bfin_t350mcqb_irq_error, IRQF_DISABLED,
+			"PPI ERROR", info);
+	if (ret < 0) {
 		printk(KERN_ERR DRIVER_NAME
 		       ": unable to request PPI ERROR IRQ\n");
-		ret = -EFAULT;
 		goto out7;
 	}
 
@@ -584,8 +576,6 @@
 	bfin_t350mcqb_request_ports(0);
 out6:
 	fb_dealloc_cmap(&fbinfo->cmap);
-out5:
-	kfree(fbinfo->pseudo_palette);
 out4:
 	dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer,
 			  info->dma_handle);
@@ -605,6 +595,8 @@
 	struct fb_info *fbinfo = platform_get_drvdata(pdev);
 	struct bfin_t350mcqbfb_info *info = fbinfo->par;
 
+	unregister_framebuffer(fbinfo);
+
 	free_dma(CH_PPI);
 	free_irq(info->irq, info);
 
@@ -612,7 +604,6 @@
 		dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer,
 				  info->dma_handle);
 
-	kfree(fbinfo->pseudo_palette);
 	fb_dealloc_cmap(&fbinfo->cmap);
 
 #ifndef NO_BL_SUPPORT
@@ -620,10 +611,11 @@
 	backlight_device_unregister(bl_dev);
 #endif
 
-	unregister_framebuffer(fbinfo);
-
 	bfin_t350mcqb_request_ports(0);
 
+	platform_set_drvdata(pdev, NULL);
+	framebuffer_release(fbinfo);
+
 	printk(KERN_INFO DRIVER_NAME ": Unregister LCD driver.\n");
 
 	return 0;
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 59a8f73..c0df924 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -37,7 +37,7 @@
 	struct pci_dev *pci_dev;
 
 	/* the IO mapping for the PCI config space */
-	void *ioaddr;
+	void __iomem *ioaddr;
 
 	/* a list of queues so we can dispatch IRQs */
 	spinlock_t lock;
@@ -111,7 +111,7 @@
 		   void *buf, unsigned len)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
-	void *ioaddr = vp_dev->ioaddr + VIRTIO_PCI_CONFIG + offset;
+	void __iomem *ioaddr = vp_dev->ioaddr + VIRTIO_PCI_CONFIG + offset;
 	u8 *ptr = buf;
 	int i;
 
@@ -125,7 +125,7 @@
 		   const void *buf, unsigned len)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
-	void *ioaddr = vp_dev->ioaddr + VIRTIO_PCI_CONFIG + offset;
+	void __iomem *ioaddr = vp_dev->ioaddr + VIRTIO_PCI_CONFIG + offset;
 	const u8 *ptr = buf;
 	int i;
 
@@ -388,6 +388,7 @@
 {
 	struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
 
+	unregister_virtio_device(&vp_dev->vdev);
 	free_irq(pci_dev->irq, vp_dev);
 	pci_set_drvdata(pci_dev, NULL);
 	pci_iounmap(pci_dev, vp_dev->ioaddr);
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index aa71402..c2fa5c6 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -214,10 +214,7 @@
 {
 	struct vring_virtqueue *vq = to_vvq(_vq);
 
-	START_USE(vq);
-	BUG_ON(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT);
 	vq->vring.avail->flags |= VRING_AVAIL_F_NO_INTERRUPT;
-	END_USE(vq);
 }
 
 static bool vring_enable_cb(struct virtqueue *_vq)
diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c
index fb5ed64..ae0fca5 100644
--- a/drivers/watchdog/at32ap700x_wdt.c
+++ b/drivers/watchdog/at32ap700x_wdt.c
@@ -418,6 +418,9 @@
 #define at32_wdt_resume NULL
 #endif
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:at32_wdt");
+
 static struct platform_driver at32_wdt_driver = {
 	.remove		= __exit_p(at32_wdt_remove),
 	.suspend	= at32_wdt_suspend,
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index a684b1e..9ff9a95 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -286,3 +286,4 @@
 MODULE_DESCRIPTION("Watchdog driver for Atmel AT91RM9200");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:at91_wdt");
diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
index a61cbd4..1782c79 100644
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c
@@ -248,6 +248,7 @@
 static struct platform_driver platform_wdt_driver = {
 	.driver = {
 		.name = "watchdog",
+		.owner	= THIS_MODULE,
 	},
 	.probe = davinci_wdt_probe,
 	.remove = davinci_wdt_remove,
@@ -277,3 +278,4 @@
 
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:watchdog");
diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c
index 1efcad3..445b7e8 100644
--- a/drivers/watchdog/it8712f_wdt.c
+++ b/drivers/watchdog/it8712f_wdt.c
@@ -111,15 +111,6 @@
 	return val;
 }
 
-static void
-superio_outw(int val, int reg)
-{
-	outb(reg++, REG);
-	outb((val >> 8) & 0xff, VAL);
-	outb(reg, REG);
-	outb(val & 0xff, VAL);
-}
-
 static inline void
 superio_select(int ldn)
 {
@@ -170,9 +161,8 @@
 	superio_outb(config, WDT_CONFIG);
 
 	if (revision >= 0x08)
-		superio_outw(units, WDT_TIMEOUT);
-	else
-		superio_outb(units, WDT_TIMEOUT);
+		superio_outb(units >> 8, WDT_TIMEOUT + 1);
+	superio_outb(units, WDT_TIMEOUT);
 }
 
 static int
@@ -210,6 +200,8 @@
 
 	superio_outb(0, WDT_CONFIG);
 	superio_outb(0, WDT_CONTROL);
+	if (revision >= 0x08)
+		superio_outb(0, WDT_TIMEOUT + 1);
 	superio_outb(0, WDT_TIMEOUT);
 
 	superio_exit();
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
index e3a29c3..df5a6b8 100644
--- a/drivers/watchdog/ks8695_wdt.c
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -306,3 +306,4 @@
 MODULE_DESCRIPTION("Watchdog driver for KS8695");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:ks8695_wdt");
diff --git a/drivers/watchdog/mpc83xx_wdt.c b/drivers/watchdog/mpc83xx_wdt.c
index 6369f56..b16c5cd 100644
--- a/drivers/watchdog/mpc83xx_wdt.c
+++ b/drivers/watchdog/mpc83xx_wdt.c
@@ -206,6 +206,7 @@
 	.remove		= __devexit_p(mpc83xx_wdt_remove),
 	.driver		= {
 		.name	= "mpc83xx_wdt",
+		.owner	= THIS_MODULE,
 	},
 };
 
@@ -226,3 +227,4 @@
 MODULE_DESCRIPTION("Driver for watchdog timer in MPC83xx uProcessor");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:mpc83xx_wdt");
diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c
index 0d2b277..009573b 100644
--- a/drivers/watchdog/mpcore_wdt.c
+++ b/drivers/watchdog/mpcore_wdt.c
@@ -392,6 +392,9 @@
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:mpcore_wdt");
+
 static struct platform_driver mpcore_wdt_driver = {
 	.probe		= mpcore_wdt_probe,
 	.remove		= __devexit_p(mpcore_wdt_remove),
diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c
index 10b89f2..a8e6738 100644
--- a/drivers/watchdog/mtx-1_wdt.c
+++ b/drivers/watchdog/mtx-1_wdt.c
@@ -243,6 +243,7 @@
 	.probe = mtx1_wdt_probe,
 	.remove = mtx1_wdt_remove,
 	.driver.name = "mtx1-wdt",
+	.driver.owner = THIS_MODULE,
 };
 
 static int __init mtx1_wdt_init(void)
@@ -262,3 +263,4 @@
 MODULE_DESCRIPTION("Driver for the MTX-1 watchdog");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:mtx1-wdt");
diff --git a/drivers/watchdog/mv64x60_wdt.c b/drivers/watchdog/mv64x60_wdt.c
index 0365c317..b59ca32 100644
--- a/drivers/watchdog/mv64x60_wdt.c
+++ b/drivers/watchdog/mv64x60_wdt.c
@@ -324,3 +324,4 @@
 MODULE_DESCRIPTION("MV64x60 watchdog driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:" MV64x60_WDT_NAME);
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index 635ca45..74bc39a 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -387,3 +387,4 @@
 MODULE_AUTHOR("George G. Davis");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:omap_wdt");
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index b04aa09..6b8483d 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -321,6 +321,7 @@
 static struct platform_driver platform_wdt_driver = {
 	.driver = {
 		.name = "watchdog",
+		.owner	= THIS_MODULE,
 	},
 	.probe = pnx4008_wdt_probe,
 	.remove = pnx4008_wdt_remove,
@@ -354,3 +355,4 @@
 
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:watchdog");
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 7645e88..98532c0e 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -561,3 +561,4 @@
 MODULE_DESCRIPTION("S3C2410 Watchdog Device Driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:s3c2410-wdt");
diff --git a/drivers/watchdog/txx9wdt.c b/drivers/watchdog/txx9wdt.c
index 328b3c7..57cefef 100644
--- a/drivers/watchdog/txx9wdt.c
+++ b/drivers/watchdog/txx9wdt.c
@@ -274,3 +274,4 @@
 MODULE_DESCRIPTION("TXx9 Watchdog Driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:txx9wdt");
diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c
index ea94dba..d85dc6d 100644
--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -381,11 +381,15 @@
 static int grow_gnttab_list(unsigned int more_frames)
 {
 	unsigned int new_nr_grant_frames, extra_entries, i;
+	unsigned int nr_glist_frames, new_nr_glist_frames;
 
 	new_nr_grant_frames = nr_grant_frames + more_frames;
 	extra_entries       = more_frames * GREFS_PER_GRANT_FRAME;
 
-	for (i = nr_grant_frames; i < new_nr_grant_frames; i++) {
+	nr_glist_frames = (nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP;
+	new_nr_glist_frames =
+		(new_nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP;
+	for (i = nr_glist_frames; i < new_nr_glist_frames; i++) {
 		gnttab_list[i] = (grant_ref_t *)__get_free_page(GFP_ATOMIC);
 		if (!gnttab_list[i])
 			goto grow_nomem;
@@ -407,7 +411,7 @@
 	return 0;
 
 grow_nomem:
-	for ( ; i >= nr_grant_frames; i--)
+	for ( ; i >= nr_glist_frames; i--)
 		free_page((unsigned long) gnttab_list[i]);
 	return -ENOMEM;
 }
@@ -530,7 +534,7 @@
 static int __devinit gnttab_init(void)
 {
 	int i;
-	unsigned int max_nr_glist_frames;
+	unsigned int max_nr_glist_frames, nr_glist_frames;
 	unsigned int nr_init_grefs;
 
 	if (!is_running_on_xen())
@@ -543,15 +547,15 @@
 	 * grant reference free list on the current hypervisor.
 	 */
 	max_nr_glist_frames = (boot_max_nr_grant_frames *
-			       GREFS_PER_GRANT_FRAME /
-			       (PAGE_SIZE / sizeof(grant_ref_t)));
+			       GREFS_PER_GRANT_FRAME / RPP);
 
 	gnttab_list = kmalloc(max_nr_glist_frames * sizeof(grant_ref_t *),
 			      GFP_KERNEL);
 	if (gnttab_list == NULL)
 		return -ENOMEM;
 
-	for (i = 0; i < nr_grant_frames; i++) {
+	nr_glist_frames = (nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP;
+	for (i = 0; i < nr_glist_frames; i++) {
 		gnttab_list[i] = (grant_ref_t *)__get_free_page(GFP_KERNEL);
 		if (gnttab_list[i] == NULL)
 			goto ini_nomem;
diff --git a/fs/Kconfig b/fs/Kconfig
index d731282..c509123 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -1744,10 +1744,10 @@
 	  If you want your Linux box to mount its whole root file system (the
 	  one containing the directory /) from some other computer over the
 	  net via NFS (presumably because your box doesn't have a hard disk),
-	  say Y. Read <file:Documentation/nfsroot.txt> for details. It is
-	  likely that in this case, you also want to say Y to "Kernel level IP
-	  autoconfiguration" so that your box can discover its network address
-	  at boot time.
+	  say Y. Read <file:Documentation/filesystems/nfsroot.txt> for
+	  details. It is likely that in this case, you also want to say Y to
+	  "Kernel level IP autoconfiguration" so that your box can discover
+	  its network address at boot time.
 
 	  Most people say N here.
 
diff --git a/fs/afs/cell.c b/fs/afs/cell.c
index 970d38f3..584bb0f 100644
--- a/fs/afs/cell.c
+++ b/fs/afs/cell.c
@@ -127,14 +127,21 @@
 
 	_enter("%s,%s", name, vllist);
 
+	down_write(&afs_cells_sem);
+	read_lock(&afs_cells_lock);
+	list_for_each_entry(cell, &afs_cells, link) {
+		if (strcasecmp(cell->name, name) == 0)
+			goto duplicate_name;
+	}
+	read_unlock(&afs_cells_lock);
+
 	cell = afs_cell_alloc(name, vllist);
 	if (IS_ERR(cell)) {
 		_leave(" = %ld", PTR_ERR(cell));
+		up_write(&afs_cells_sem);
 		return cell;
 	}
 
-	down_write(&afs_cells_sem);
-
 	/* add a proc directory for this cell */
 	ret = afs_proc_cell_setup(cell);
 	if (ret < 0)
@@ -167,6 +174,11 @@
 	kfree(cell);
 	_leave(" = %d", ret);
 	return ERR_PTR(ret);
+
+duplicate_name:
+	read_unlock(&afs_cells_lock);
+	up_write(&afs_cells_sem);
+	return ERR_PTR(-EEXIST);
 }
 
 /*
diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index 5ca3625..eec41c7 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -573,7 +573,6 @@
 
 extern int afs_mntpt_check_symlink(struct afs_vnode *, struct key *);
 extern void afs_mntpt_kill_timer(void);
-extern void afs_umount_begin(struct vfsmount *, int);
 
 /*
  * proc.c
@@ -750,7 +749,7 @@
 extern unsigned afs_debug;
 
 #define dbgprintk(FMT,...) \
-	printk("[%x%-6.6s] "FMT"\n", smp_processor_id(), current->comm ,##__VA_ARGS__)
+	printk("[%-6.6s] "FMT"\n", current->comm ,##__VA_ARGS__)
 
 /* make sure we maintain the format strings, even when debugging is disabled */
 static inline __attribute__((format(printf,1,2)))
diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c
index a3510b8..2f55039 100644
--- a/fs/afs/mntpt.c
+++ b/fs/afs/mntpt.c
@@ -283,11 +283,3 @@
 	cancel_delayed_work(&afs_mntpt_expiry_timer);
 	flush_scheduled_work();
 }
-
-/*
- * begin unmount by attempting to remove all automounted mountpoints we added
- */
-void afs_umount_begin(struct vfsmount *vfsmnt, int flags)
-{
-	shrink_submounts(vfsmnt, &afs_vfsmounts);
-}
diff --git a/fs/afs/super.c b/fs/afs/super.c
index 36bbce4..4b572b8 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -50,7 +50,6 @@
 	.write_inode	= afs_write_inode,
 	.destroy_inode	= afs_destroy_inode,
 	.clear_inode	= afs_clear_inode,
-	.umount_begin	= afs_umount_begin,
 	.put_super	= afs_put_super,
 	.show_options	= generic_show_options,
 };
diff --git a/fs/aio.c b/fs/aio.c
index 6af9219..2283686 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -936,14 +936,6 @@
 		return 1;
 	}
 
-	/*
-	 * Check if the user asked us to deliver the result through an
-	 * eventfd. The eventfd_signal() function is safe to be called
-	 * from IRQ context.
-	 */
-	if (!IS_ERR(iocb->ki_eventfd))
-		eventfd_signal(iocb->ki_eventfd, 1);
-
 	info = &ctx->ring_info;
 
 	/* add a completion event to the ring buffer.
@@ -992,6 +984,15 @@
 	kunmap_atomic(ring, KM_IRQ1);
 
 	pr_debug("added to ring %p at [%lu]\n", iocb, tail);
+
+	/*
+	 * Check if the user asked us to deliver the result through an
+	 * eventfd. The eventfd_signal() function is safe to be called
+	 * from IRQ context.
+	 */
+	if (!IS_ERR(iocb->ki_eventfd))
+		eventfd_signal(iocb->ki_eventfd, 1);
+
 put_rq:
 	/* everything turned out well, dispose of the aiocb. */
 	ret = __aio_put_req(ctx, iocb);
@@ -1790,6 +1791,7 @@
 		put_ioctx(ioctx);
 	}
 
+	asmlinkage_protect(5, ret, ctx_id, min_nr, nr, events, timeout);
 	return ret;
 }
 
diff --git a/fs/buffer.c b/fs/buffer.c
index 7ba5838..39ff144 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -1181,7 +1181,20 @@
 void mark_buffer_dirty(struct buffer_head *bh)
 {
 	WARN_ON_ONCE(!buffer_uptodate(bh));
-	if (!buffer_dirty(bh) && !test_set_buffer_dirty(bh))
+
+	/*
+	 * Very *carefully* optimize the it-is-already-dirty case.
+	 *
+	 * Don't let the final "is it dirty" escape to before we
+	 * perhaps modified the buffer.
+	 */
+	if (buffer_dirty(bh)) {
+		smp_mb();
+		if (buffer_dirty(bh))
+			return;
+	}
+
+	if (!test_set_buffer_dirty(bh))
 		__set_page_dirty(bh->b_page, page_mapping(bh->b_page), 0);
 }
 
@@ -2564,14 +2577,13 @@
 	struct inode *inode = page->mapping->host;
 	struct buffer_head *head = fsdata;
 	struct buffer_head *bh;
+	BUG_ON(fsdata != NULL && page_has_buffers(page));
 
-	if (!PageMappedToDisk(page)) {
-		if (unlikely(copied < len) && !page_has_buffers(page))
-			attach_nobh_buffers(page, head);
-		if (page_has_buffers(page))
-			return generic_write_end(file, mapping, pos, len,
-						copied, page, fsdata);
-	}
+	if (unlikely(copied < len) && !page_has_buffers(page))
+		attach_nobh_buffers(page, head);
+	if (page_has_buffers(page))
+		return generic_write_end(file, mapping, pos, len,
+					copied, page, fsdata);
 
 	SetPageUptodate(page);
 	set_page_dirty(page);
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index a1a95b0..56c9240 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -33,7 +33,6 @@
 {
 	mark_mounts_for_expiry(&cifs_dfs_automount_list);
 	mark_mounts_for_expiry(&cifs_dfs_automount_list);
-	shrink_submounts(vfsmnt, &cifs_dfs_automount_list);
 }
 
 /**
diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index 1f5a428..1cb5b0a 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -261,7 +261,7 @@
 	return;
 }
 
-static __le16 fill_ace_for_sid(struct cifs_ace *pntace,
+static __u16 fill_ace_for_sid(struct cifs_ace *pntace,
 			const struct cifs_sid *psid, __u64 nmode, umode_t bits)
 {
 	int i;
@@ -411,7 +411,7 @@
 static int set_chmod_dacl(struct cifs_acl *pndacl, struct cifs_sid *pownersid,
 			struct cifs_sid *pgrpsid, __u64 nmode)
 {
-	__le16 size = 0;
+	u16 size = 0;
 	struct cifs_acl *pnndacl;
 
 	pnndacl = (struct cifs_acl *)((char *)pndacl + sizeof(struct cifs_acl));
diff --git a/fs/efs/inode.c b/fs/efs/inode.c
index 79e19e5..a8e7797 100644
--- a/fs/efs/inode.c
+++ b/fs/efs/inode.c
@@ -140,7 +140,7 @@
 	brelse(bh);
    
 #ifdef DEBUG
-	printk(KERN_DEBUG "EFS: read_inode(): inode %lu, extents %d, mode %o\n",
+	printk(KERN_DEBUG "EFS: efs_iget(): inode %lu, extents %d, mode %o\n",
 		inode->i_ino, in->numextents, inode->i_mode);
 #endif
 
diff --git a/fs/hfsplus/dir.c b/fs/hfsplus/dir.c
index 2968364..5f40236 100644
--- a/fs/hfsplus/dir.c
+++ b/fs/hfsplus/dir.c
@@ -340,16 +340,23 @@
 
 	if (inode->i_nlink > 0)
 		drop_nlink(inode);
-	hfsplus_delete_inode(inode);
-	if (inode->i_ino != cnid && !inode->i_nlink) {
-		if (!atomic_read(&HFSPLUS_I(inode).opencnt)) {
-			res = hfsplus_delete_cat(inode->i_ino, HFSPLUS_SB(sb).hidden_dir, NULL);
-			if (!res)
-				hfsplus_delete_inode(inode);
-		} else
-			inode->i_flags |= S_DEAD;
-	} else
+	if (inode->i_ino == cnid)
 		clear_nlink(inode);
+	if (!inode->i_nlink) {
+		if (inode->i_ino != cnid) {
+			HFSPLUS_SB(sb).file_count--;
+			if (!atomic_read(&HFSPLUS_I(inode).opencnt)) {
+				res = hfsplus_delete_cat(inode->i_ino,
+							 HFSPLUS_SB(sb).hidden_dir,
+							 NULL);
+				if (!res)
+					hfsplus_delete_inode(inode);
+			} else
+				inode->i_flags |= S_DEAD;
+		} else
+			hfsplus_delete_inode(inode);
+	} else
+		HFSPLUS_SB(sb).file_count--;
 	inode->i_ctime = CURRENT_TIME_SEC;
 	mark_inode_dirty(inode);
 
diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c
index 9816293..0e081d5 100644
--- a/fs/jbd/journal.c
+++ b/fs/jbd/journal.c
@@ -1620,14 +1620,14 @@
 {
 	int retval;
 
-	J_ASSERT(journal_head_cache == 0);
+	J_ASSERT(journal_head_cache == NULL);
 	journal_head_cache = kmem_cache_create("journal_head",
 				sizeof(struct journal_head),
 				0,		/* offset */
 				SLAB_TEMPORARY,	/* flags */
 				NULL);		/* ctor */
 	retval = 0;
-	if (journal_head_cache == 0) {
+	if (!journal_head_cache) {
 		retval = -ENOMEM;
 		printk(KERN_EMERG "JBD: no memory for journal_head cache\n");
 	}
diff --git a/fs/jbd/revoke.c b/fs/jbd/revoke.c
index ad2eacf..d5f8eee 100644
--- a/fs/jbd/revoke.c
+++ b/fs/jbd/revoke.c
@@ -173,13 +173,13 @@
 					   0,
 					   SLAB_HWCACHE_ALIGN|SLAB_TEMPORARY,
 					   NULL);
-	if (revoke_record_cache == 0)
+	if (!revoke_record_cache)
 		return -ENOMEM;
 
 	revoke_table_cache = kmem_cache_create("revoke_table",
 					   sizeof(struct jbd_revoke_table_s),
 					   0, SLAB_TEMPORARY, NULL);
-	if (revoke_table_cache == 0) {
+	if (!revoke_table_cache) {
 		kmem_cache_destroy(revoke_record_cache);
 		revoke_record_cache = NULL;
 		return -ENOMEM;
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 96ba846..954cff0 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -219,7 +219,7 @@
 	if (IS_ERR(t))
 		return PTR_ERR(t);
 
-	wait_event(journal->j_wait_done_commit, journal->j_task != 0);
+	wait_event(journal->j_wait_done_commit, journal->j_task != NULL);
 	return 0;
 }
 
@@ -231,7 +231,7 @@
 	while (journal->j_task) {
 		wake_up(&journal->j_wait_commit);
 		spin_unlock(&journal->j_state_lock);
-		wait_event(journal->j_wait_done_commit, journal->j_task == 0);
+		wait_event(journal->j_wait_done_commit, journal->j_task == NULL);
 		spin_lock(&journal->j_state_lock);
 	}
 	spin_unlock(&journal->j_state_lock);
@@ -1969,14 +1969,14 @@
 {
 	int retval;
 
-	J_ASSERT(jbd2_journal_head_cache == 0);
+	J_ASSERT(jbd2_journal_head_cache == NULL);
 	jbd2_journal_head_cache = kmem_cache_create("jbd2_journal_head",
 				sizeof(struct journal_head),
 				0,		/* offset */
 				SLAB_TEMPORARY,	/* flags */
 				NULL);		/* ctor */
 	retval = 0;
-	if (jbd2_journal_head_cache == 0) {
+	if (!jbd2_journal_head_cache) {
 		retval = -ENOMEM;
 		printk(KERN_EMERG "JBD: no memory for journal_head cache\n");
 	}
@@ -2002,14 +2002,14 @@
 	atomic_inc(&nr_journal_heads);
 #endif
 	ret = kmem_cache_alloc(jbd2_journal_head_cache, GFP_NOFS);
-	if (ret == 0) {
+	if (!ret) {
 		jbd_debug(1, "out of memory for journal_head\n");
 		if (time_after(jiffies, last_warning + 5*HZ)) {
 			printk(KERN_NOTICE "ENOMEM in %s, retrying.\n",
 			       __FUNCTION__);
 			last_warning = jiffies;
 		}
-		while (ret == 0) {
+		while (!ret) {
 			yield();
 			ret = kmem_cache_alloc(jbd2_journal_head_cache, GFP_NOFS);
 		}
diff --git a/fs/jbd2/revoke.c b/fs/jbd2/revoke.c
index df36f42..2e1453a 100644
--- a/fs/jbd2/revoke.c
+++ b/fs/jbd2/revoke.c
@@ -174,13 +174,13 @@
 					   0,
 					   SLAB_HWCACHE_ALIGN|SLAB_TEMPORARY,
 					   NULL);
-	if (jbd2_revoke_record_cache == 0)
+	if (!jbd2_revoke_record_cache)
 		return -ENOMEM;
 
 	jbd2_revoke_table_cache = kmem_cache_create("jbd2_revoke_table",
 					   sizeof(struct jbd2_revoke_table_s),
 					   0, SLAB_TEMPORARY, NULL);
-	if (jbd2_revoke_table_cache == 0) {
+	if (!jbd2_revoke_table_cache) {
 		kmem_cache_destroy(jbd2_revoke_record_cache);
 		jbd2_revoke_record_cache = NULL;
 		return -ENOMEM;
diff --git a/fs/namespace.c b/fs/namespace.c
index 7953c96..94f026e 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -155,15 +155,15 @@
 	}
 }
 
-static void detach_mnt(struct vfsmount *mnt, struct nameidata *old_nd)
+static void detach_mnt(struct vfsmount *mnt, struct path *old_path)
 {
-	old_nd->path.dentry = mnt->mnt_mountpoint;
-	old_nd->path.mnt = mnt->mnt_parent;
+	old_path->dentry = mnt->mnt_mountpoint;
+	old_path->mnt = mnt->mnt_parent;
 	mnt->mnt_parent = mnt;
 	mnt->mnt_mountpoint = mnt->mnt_root;
 	list_del_init(&mnt->mnt_child);
 	list_del_init(&mnt->mnt_hash);
-	old_nd->path.dentry->d_mounted--;
+	old_path->dentry->d_mounted--;
 }
 
 void mnt_set_mountpoint(struct vfsmount *mnt, struct dentry *dentry,
@@ -174,12 +174,12 @@
 	dentry->d_mounted++;
 }
 
-static void attach_mnt(struct vfsmount *mnt, struct nameidata *nd)
+static void attach_mnt(struct vfsmount *mnt, struct path *path)
 {
-	mnt_set_mountpoint(nd->path.mnt, nd->path.dentry, mnt);
+	mnt_set_mountpoint(path->mnt, path->dentry, mnt);
 	list_add_tail(&mnt->mnt_hash, mount_hashtable +
-			hash(nd->path.mnt, nd->path.dentry));
-	list_add_tail(&mnt->mnt_child, &nd->path.mnt->mnt_mounts);
+			hash(path->mnt, path->dentry));
+	list_add_tail(&mnt->mnt_child, &path->mnt->mnt_mounts);
 }
 
 /*
@@ -262,10 +262,8 @@
 		/* stick the duplicate mount on the same expiry list
 		 * as the original if that was on one */
 		if (flag & CL_EXPIRE) {
-			spin_lock(&vfsmount_lock);
 			if (!list_empty(&old->mnt_expire))
 				list_add(&mnt->mnt_expire, &old->mnt_expire);
-			spin_unlock(&vfsmount_lock);
 		}
 	}
 	return mnt;
@@ -548,6 +546,7 @@
 			m = mnt->mnt_parent;
 			mnt->mnt_mountpoint = mnt->mnt_root;
 			mnt->mnt_parent = mnt;
+			m->mnt_ghosts--;
 			spin_unlock(&vfsmount_lock);
 			dput(dentry);
 			mntput(m);
@@ -572,12 +571,16 @@
 		__touch_mnt_namespace(p->mnt_ns);
 		p->mnt_ns = NULL;
 		list_del_init(&p->mnt_child);
-		if (p->mnt_parent != p)
+		if (p->mnt_parent != p) {
+			p->mnt_parent->mnt_ghosts++;
 			p->mnt_mountpoint->d_mounted--;
+		}
 		change_mnt_propagation(p, MS_PRIVATE);
 	}
 }
 
+static void shrink_submounts(struct vfsmount *mnt, struct list_head *umounts);
+
 static int do_umount(struct vfsmount *mnt, int flags)
 {
 	struct super_block *sb = mnt->mnt_sb;
@@ -650,6 +653,9 @@
 	spin_lock(&vfsmount_lock);
 	event++;
 
+	if (!(flags & MNT_DETACH))
+		shrink_submounts(mnt, &umount_list);
+
 	retval = -EBUSY;
 	if (flags & MNT_DETACH || !propagate_mount_busy(mnt, 2)) {
 		if (!list_empty(&mnt->mnt_list))
@@ -744,7 +750,7 @@
 					int flag)
 {
 	struct vfsmount *res, *p, *q, *r, *s;
-	struct nameidata nd;
+	struct path path;
 
 	if (!(flag & CL_COPY_ALL) && IS_MNT_UNBINDABLE(mnt))
 		return NULL;
@@ -769,14 +775,14 @@
 				q = q->mnt_parent;
 			}
 			p = s;
-			nd.path.mnt = q;
-			nd.path.dentry = p->mnt_mountpoint;
+			path.mnt = q;
+			path.dentry = p->mnt_mountpoint;
 			q = clone_mnt(p, p->mnt_root, flag);
 			if (!q)
 				goto Enomem;
 			spin_lock(&vfsmount_lock);
 			list_add_tail(&q->mnt_list, &res->mnt_list);
-			attach_mnt(q, &nd);
+			attach_mnt(q, &path);
 			spin_unlock(&vfsmount_lock);
 		}
 	}
@@ -876,11 +882,11 @@
  * in allocations.
  */
 static int attach_recursive_mnt(struct vfsmount *source_mnt,
-			struct nameidata *nd, struct nameidata *parent_nd)
+			struct path *path, struct path *parent_path)
 {
 	LIST_HEAD(tree_list);
-	struct vfsmount *dest_mnt = nd->path.mnt;
-	struct dentry *dest_dentry = nd->path.dentry;
+	struct vfsmount *dest_mnt = path->mnt;
+	struct dentry *dest_dentry = path->dentry;
 	struct vfsmount *child, *p;
 
 	if (propagate_mnt(dest_mnt, dest_dentry, source_mnt, &tree_list))
@@ -892,9 +898,9 @@
 	}
 
 	spin_lock(&vfsmount_lock);
-	if (parent_nd) {
-		detach_mnt(source_mnt, parent_nd);
-		attach_mnt(source_mnt, nd);
+	if (parent_path) {
+		detach_mnt(source_mnt, parent_path);
+		attach_mnt(source_mnt, path);
 		touch_mnt_namespace(current->nsproxy->mnt_ns);
 	} else {
 		mnt_set_mountpoint(dest_mnt, dest_dentry, source_mnt);
@@ -930,7 +936,7 @@
 
 	err = -ENOENT;
 	if (IS_ROOT(nd->path.dentry) || !d_unhashed(nd->path.dentry))
-		err = attach_recursive_mnt(mnt, nd, NULL);
+		err = attach_recursive_mnt(mnt, &nd->path, NULL);
 out_unlock:
 	mutex_unlock(&nd->path.dentry->d_inode->i_mutex);
 	if (!err)
@@ -1059,7 +1065,8 @@
  */
 static noinline int do_move_mount(struct nameidata *nd, char *old_name)
 {
-	struct nameidata old_nd, parent_nd;
+	struct nameidata old_nd;
+	struct path parent_path;
 	struct vfsmount *p;
 	int err = 0;
 	if (!capable(CAP_SYS_ADMIN))
@@ -1114,21 +1121,19 @@
 		if (p == old_nd.path.mnt)
 			goto out1;
 
-	err = attach_recursive_mnt(old_nd.path.mnt, nd, &parent_nd);
+	err = attach_recursive_mnt(old_nd.path.mnt, &nd->path, &parent_path);
 	if (err)
 		goto out1;
 
-	spin_lock(&vfsmount_lock);
 	/* if the mount is moved, it should no longer be expire
 	 * automatically */
 	list_del_init(&old_nd.path.mnt->mnt_expire);
-	spin_unlock(&vfsmount_lock);
 out1:
 	mutex_unlock(&nd->path.dentry->d_inode->i_mutex);
 out:
 	up_write(&namespace_sem);
 	if (!err)
-		path_put(&parent_nd.path);
+		path_put(&parent_path);
 	path_put(&old_nd.path);
 	return err;
 }
@@ -1189,12 +1194,9 @@
 	if ((err = graft_tree(newmnt, nd)))
 		goto unlock;
 
-	if (fslist) {
-		/* add to the specified expiration list */
-		spin_lock(&vfsmount_lock);
+	if (fslist) /* add to the specified expiration list */
 		list_add_tail(&newmnt->mnt_expire, fslist);
-		spin_unlock(&vfsmount_lock);
-	}
+
 	up_write(&namespace_sem);
 	return 0;
 
@@ -1206,75 +1208,6 @@
 
 EXPORT_SYMBOL_GPL(do_add_mount);
 
-static void expire_mount(struct vfsmount *mnt, struct list_head *mounts,
-				struct list_head *umounts)
-{
-	spin_lock(&vfsmount_lock);
-
-	/*
-	 * Check if mount is still attached, if not, let whoever holds it deal
-	 * with the sucker
-	 */
-	if (mnt->mnt_parent == mnt) {
-		spin_unlock(&vfsmount_lock);
-		return;
-	}
-
-	/*
-	 * Check that it is still dead: the count should now be 2 - as
-	 * contributed by the vfsmount parent and the mntget above
-	 */
-	if (!propagate_mount_busy(mnt, 2)) {
-		/* delete from the namespace */
-		touch_mnt_namespace(mnt->mnt_ns);
-		list_del_init(&mnt->mnt_list);
-		mnt->mnt_ns = NULL;
-		umount_tree(mnt, 1, umounts);
-		spin_unlock(&vfsmount_lock);
-	} else {
-		/*
-		 * Someone brought it back to life whilst we didn't have any
-		 * locks held so return it to the expiration list
-		 */
-		list_add_tail(&mnt->mnt_expire, mounts);
-		spin_unlock(&vfsmount_lock);
-	}
-}
-
-/*
- * go through the vfsmounts we've just consigned to the graveyard to
- * - check that they're still dead
- * - delete the vfsmount from the appropriate namespace under lock
- * - dispose of the corpse
- */
-static void expire_mount_list(struct list_head *graveyard, struct list_head *mounts)
-{
-	struct mnt_namespace *ns;
-	struct vfsmount *mnt;
-
-	while (!list_empty(graveyard)) {
-		LIST_HEAD(umounts);
-		mnt = list_first_entry(graveyard, struct vfsmount, mnt_expire);
-		list_del_init(&mnt->mnt_expire);
-
-		/* don't do anything if the namespace is dead - all the
-		 * vfsmounts from it are going away anyway */
-		ns = mnt->mnt_ns;
-		if (!ns || !ns->root)
-			continue;
-		get_mnt_ns(ns);
-
-		spin_unlock(&vfsmount_lock);
-		down_write(&namespace_sem);
-		expire_mount(mnt, mounts, &umounts);
-		up_write(&namespace_sem);
-		release_mounts(&umounts);
-		mntput(mnt);
-		put_mnt_ns(ns);
-		spin_lock(&vfsmount_lock);
-	}
-}
-
 /*
  * process a list of expirable mountpoints with the intent of discarding any
  * mountpoints that aren't in use and haven't been touched since last we came
@@ -1284,10 +1217,12 @@
 {
 	struct vfsmount *mnt, *next;
 	LIST_HEAD(graveyard);
+	LIST_HEAD(umounts);
 
 	if (list_empty(mounts))
 		return;
 
+	down_write(&namespace_sem);
 	spin_lock(&vfsmount_lock);
 
 	/* extract from the expiration list every vfsmount that matches the
@@ -1298,16 +1233,19 @@
 	 */
 	list_for_each_entry_safe(mnt, next, mounts, mnt_expire) {
 		if (!xchg(&mnt->mnt_expiry_mark, 1) ||
-		    atomic_read(&mnt->mnt_count) != 1)
+			propagate_mount_busy(mnt, 1))
 			continue;
-
-		mntget(mnt);
 		list_move(&mnt->mnt_expire, &graveyard);
 	}
-
-	expire_mount_list(&graveyard, mounts);
-
+	while (!list_empty(&graveyard)) {
+		mnt = list_first_entry(&graveyard, struct vfsmount, mnt_expire);
+		touch_mnt_namespace(mnt->mnt_ns);
+		umount_tree(mnt, 1, &umounts);
+	}
 	spin_unlock(&vfsmount_lock);
+	up_write(&namespace_sem);
+
+	release_mounts(&umounts);
 }
 
 EXPORT_SYMBOL_GPL(mark_mounts_for_expiry);
@@ -1343,7 +1281,6 @@
 		}
 
 		if (!propagate_mount_busy(mnt, 1)) {
-			mntget(mnt);
 			list_move_tail(&mnt->mnt_expire, graveyard);
 			found++;
 		}
@@ -1363,22 +1300,22 @@
  * process a list of expirable mountpoints with the intent of discarding any
  * submounts of a specific parent mountpoint
  */
-void shrink_submounts(struct vfsmount *mountpoint, struct list_head *mounts)
+static void shrink_submounts(struct vfsmount *mnt, struct list_head *umounts)
 {
 	LIST_HEAD(graveyard);
-	int found;
-
-	spin_lock(&vfsmount_lock);
+	struct vfsmount *m;
 
 	/* extract submounts of 'mountpoint' from the expiration list */
-	while ((found = select_submounts(mountpoint, &graveyard)) != 0)
-		expire_mount_list(&graveyard, mounts);
-
-	spin_unlock(&vfsmount_lock);
+	while (select_submounts(mnt, &graveyard)) {
+		while (!list_empty(&graveyard)) {
+			m = list_first_entry(&graveyard, struct vfsmount,
+						mnt_expire);
+			touch_mnt_namespace(mnt->mnt_ns);
+			umount_tree(mnt, 1, umounts);
+		}
+	}
 }
 
-EXPORT_SYMBOL_GPL(shrink_submounts);
-
 /*
  * Some copy_from_user() implementations do not return the exact number of
  * bytes remaining to copy on a fault.  But copy_mount_options() requires that.
@@ -1683,7 +1620,7 @@
 		path_put(&old_pwd);
 }
 
-static void chroot_fs_refs(struct nameidata *old_nd, struct nameidata *new_nd)
+static void chroot_fs_refs(struct path *old_root, struct path *new_root)
 {
 	struct task_struct *g, *p;
 	struct fs_struct *fs;
@@ -1695,12 +1632,12 @@
 		if (fs) {
 			atomic_inc(&fs->count);
 			task_unlock(p);
-			if (fs->root.dentry == old_nd->path.dentry
-			    && fs->root.mnt == old_nd->path.mnt)
-				set_fs_root(fs, &new_nd->path);
-			if (fs->pwd.dentry == old_nd->path.dentry
-			    && fs->pwd.mnt == old_nd->path.mnt)
-				set_fs_pwd(fs, &new_nd->path);
+			if (fs->root.dentry == old_root->dentry
+			    && fs->root.mnt == old_root->mnt)
+				set_fs_root(fs, new_root);
+			if (fs->pwd.dentry == old_root->dentry
+			    && fs->pwd.mnt == old_root->mnt)
+				set_fs_pwd(fs, new_root);
 			put_fs_struct(fs);
 		} else
 			task_unlock(p);
@@ -1737,7 +1674,8 @@
 			       const char __user * put_old)
 {
 	struct vfsmount *tmp;
-	struct nameidata new_nd, old_nd, parent_nd, root_parent, user_nd;
+	struct nameidata new_nd, old_nd, user_nd;
+	struct path parent_path, root_parent;
 	int error;
 
 	if (!capable(CAP_SYS_ADMIN))
@@ -1811,19 +1749,19 @@
 			goto out3;
 	} else if (!is_subdir(old_nd.path.dentry, new_nd.path.dentry))
 		goto out3;
-	detach_mnt(new_nd.path.mnt, &parent_nd);
+	detach_mnt(new_nd.path.mnt, &parent_path);
 	detach_mnt(user_nd.path.mnt, &root_parent);
 	/* mount old root on put_old */
-	attach_mnt(user_nd.path.mnt, &old_nd);
+	attach_mnt(user_nd.path.mnt, &old_nd.path);
 	/* mount new_root on / */
 	attach_mnt(new_nd.path.mnt, &root_parent);
 	touch_mnt_namespace(current->nsproxy->mnt_ns);
 	spin_unlock(&vfsmount_lock);
-	chroot_fs_refs(&user_nd, &new_nd);
+	chroot_fs_refs(&user_nd.path, &new_nd.path);
 	security_sb_post_pivotroot(&user_nd, &new_nd);
 	error = 0;
-	path_put(&root_parent.path);
-	path_put(&parent_nd.path);
+	path_put(&root_parent);
+	path_put(&parent_path);
 out2:
 	mutex_unlock(&old_nd.path.dentry->d_inode->i_mutex);
 	up_write(&namespace_sem);
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index ef57a5a..5d2e9d9 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -64,7 +64,11 @@
 	.write		= do_sync_write,
 	.aio_read	= nfs_file_read,
 	.aio_write	= nfs_file_write,
+#ifdef CONFIG_MMU
 	.mmap		= nfs_file_mmap,
+#else
+	.mmap		= generic_file_mmap,
+#endif
 	.open		= nfs_file_open,
 	.flush		= nfs_file_flush,
 	.release	= nfs_file_release,
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index a4c7cf2..6f88d7c 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -506,6 +506,7 @@
 		ctx->cred = get_rpccred(cred);
 		ctx->state = NULL;
 		ctx->lockowner = current->files;
+		ctx->flags = 0;
 		ctx->error = 0;
 		ctx->dir_cookie = 0;
 		atomic_set(&ctx->count, 1);
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index dd4dfcd..f921902 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -589,8 +589,6 @@
 	struct nfs_server *server = NFS_SB(vfsmnt->mnt_sb);
 	struct rpc_clnt *rpc;
 
-	shrink_submounts(vfsmnt, &nfs_automount_list);
-
 	if (!(flags & MNT_FORCE))
 		return;
 	/* -EIO all pending I/O */
diff --git a/fs/open.c b/fs/open.c
index a4b1202..3fa4e4f 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -335,7 +335,7 @@
 {
 	long ret = do_sys_ftruncate(fd, length, 1);
 	/* avoid REGPARM breakage on x86: */
-	prevent_tail_call(ret);
+	asmlinkage_protect(2, ret, fd, length);
 	return ret;
 }
 
@@ -350,7 +350,7 @@
 {
 	long ret = do_sys_ftruncate(fd, length, 0);
 	/* avoid REGPARM breakage on x86: */
-	prevent_tail_call(ret);
+	asmlinkage_protect(2, ret, fd, length);
 	return ret;
 }
 #endif
@@ -1067,7 +1067,7 @@
 
 	ret = do_sys_open(AT_FDCWD, filename, flags, mode);
 	/* avoid REGPARM breakage on x86: */
-	prevent_tail_call(ret);
+	asmlinkage_protect(3, ret, filename, flags, mode);
 	return ret;
 }
 
@@ -1081,7 +1081,7 @@
 
 	ret = do_sys_open(dfd, filename, flags, mode);
 	/* avoid REGPARM breakage on x86: */
-	prevent_tail_call(ret);
+	asmlinkage_protect(4, ret, dfd, filename, flags, mode);
 	return ret;
 }
 
diff --git a/fs/pnode.c b/fs/pnode.c
index 05ba692..1d8f544 100644
--- a/fs/pnode.c
+++ b/fs/pnode.c
@@ -225,7 +225,7 @@
  */
 static inline int do_refcount_check(struct vfsmount *mnt, int count)
 {
-	int mycount = atomic_read(&mnt->mnt_count);
+	int mycount = atomic_read(&mnt->mnt_count) - mnt->mnt_ghosts;
 	return (mycount > count);
 }
 
diff --git a/fs/reiserfs/do_balan.c b/fs/reiserfs/do_balan.c
index f85c5cf..7ee4208 100644
--- a/fs/reiserfs/do_balan.c
+++ b/fs/reiserfs/do_balan.c
@@ -283,7 +283,7 @@
 		return balance_leaf_when_delete(tb, flag);
 
 	zeros_num = 0;
-	if (flag == M_INSERT && body == 0)
+	if (flag == M_INSERT && !body)
 		zeros_num = ih_item_len(ih);
 
 	pos_in_item = tb->tb_path->pos_in_item;
@@ -1728,7 +1728,7 @@
 	struct buffer_info bi;
 
 	for (i = 0; i < MAX_FEB_SIZE; i++)
-		if (tb->FEB[i] != 0)
+		if (tb->FEB[i] != NULL)
 			break;
 
 	if (i == MAX_FEB_SIZE)
@@ -1827,7 +1827,7 @@
 {
 	int Sh_position = PATH_H_POSITION(tb->tb_path, h + 1);
 
-	RFALSE(PATH_H_PPARENT(tb->tb_path, h) == 0 || tb->FL[h] == 0,
+	RFALSE(PATH_H_PPARENT(tb->tb_path, h) == NULL || tb->FL[h] == NULL,
 	       "vs-12325: FL[%d](%p) or F[%d](%p) does not exist",
 	       h, tb->FL[h], h, PATH_H_PPARENT(tb->tb_path, h));
 
@@ -1841,7 +1841,7 @@
 {
 	int Sh_position = PATH_H_POSITION(tb->tb_path, h + 1);
 
-	RFALSE(PATH_H_PPARENT(tb->tb_path, h) == 0 || tb->FR[h] == 0,
+	RFALSE(PATH_H_PPARENT(tb->tb_path, h) == NULL || tb->FR[h] == NULL,
 	       "vs-12330: F[%d](%p) or FR[%d](%p) does not exist",
 	       h, PATH_H_PPARENT(tb->tb_path, h), h, tb->FR[h]);
 
diff --git a/fs/reiserfs/fix_node.c b/fs/reiserfs/fix_node.c
index 0ee35c6..07d05e0 100644
--- a/fs/reiserfs/fix_node.c
+++ b/fs/reiserfs/fix_node.c
@@ -153,7 +153,7 @@
 	if (vn->vn_mode == M_INSERT) {
 		struct virtual_item *vi = vn->vn_vi + vn->vn_affected_item_num;
 
-		RFALSE(vn->vn_ins_ih == 0,
+		RFALSE(vn->vn_ins_ih == NULL,
 		       "vs-8040: item header of inserted item is not specified");
 		vi->vi_item_len = tb->insert_size[0];
 		vi->vi_ih = vn->vn_ins_ih;
@@ -857,7 +857,8 @@
 	struct buffer_head *l, *f;
 	int order;
 
-	if ((f = PATH_H_PPARENT(tb->tb_path, h)) == 0 || (l = tb->FL[h]) == 0)
+	if ((f = PATH_H_PPARENT(tb->tb_path, h)) == NULL ||
+	    (l = tb->FL[h]) == NULL)
 		return 0;
 
 	if (f == l)
@@ -878,7 +879,8 @@
 	struct buffer_head *r, *f;
 	int order;
 
-	if ((f = PATH_H_PPARENT(tb->tb_path, h)) == 0 || (r = tb->FR[h]) == 0)
+	if ((f = PATH_H_PPARENT(tb->tb_path, h)) == NULL ||
+	    (r = tb->FR[h]) == NULL)
 		return 0;
 
 	if (f == r)
diff --git a/fs/reiserfs/lbalance.c b/fs/reiserfs/lbalance.c
index 281f806..6de060a 100644
--- a/fs/reiserfs/lbalance.c
+++ b/fs/reiserfs/lbalance.c
@@ -626,7 +626,7 @@
 			       "vs-10250: leaf_define_dest_src_infos: shift type is unknown (%d)",
 			       shift_mode);
 	}
-	RFALSE(src_bi->bi_bh == 0 || dest_bi->bi_bh == 0,
+	RFALSE(!src_bi->bi_bh || !dest_bi->bi_bh,
 	       "vs-10260: mode==%d, source (%p) or dest (%p) buffer is initialized incorrectly",
 	       shift_mode, src_bi->bi_bh, dest_bi->bi_bh);
 }
diff --git a/fs/reiserfs/namei.c b/fs/reiserfs/namei.c
index b378eea..8867533 100644
--- a/fs/reiserfs/namei.c
+++ b/fs/reiserfs/namei.c
@@ -452,7 +452,7 @@
 	buflen = DEH_SIZE + ROUND_UP(namelen);
 	if (buflen > sizeof(small_buf)) {
 		buffer = kmalloc(buflen, GFP_NOFS);
-		if (buffer == 0)
+		if (!buffer)
 			return -ENOMEM;
 	} else
 		buffer = small_buf;
diff --git a/fs/signalfd.c b/fs/signalfd.c
index cb2b63a..8ead0db 100644
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -111,9 +111,14 @@
 		err |= __put_user(kinfo->si_uid, &uinfo->ssi_uid);
 		err |= __put_user((long) kinfo->si_ptr, &uinfo->ssi_ptr);
 		break;
-	default: /* this is just in case for now ... */
+	default:
+		/*
+		 * This case catches also the signals queued by sigqueue().
+		 */
 		err |= __put_user(kinfo->si_pid, &uinfo->ssi_pid);
 		err |= __put_user(kinfo->si_uid, &uinfo->ssi_uid);
+		err |= __put_user((long) kinfo->si_ptr, &uinfo->ssi_ptr);
+		err |= __put_user(kinfo->si_int, &uinfo->ssi_int);
 		break;
 	}
 
diff --git a/fs/smbfs/smbiod.c b/fs/smbfs/smbiod.c
index fae8e85a..6bd9b69 100644
--- a/fs/smbfs/smbiod.c
+++ b/fs/smbfs/smbiod.c
@@ -206,7 +206,7 @@
 
 	smb_close_socket(server);
 
-	if (pid == 0) {
+	if (!pid) {
 		/* FIXME: this is fatal, umount? */
 		printk(KERN_ERR "smb_retry: no connection process\n");
 		server->state = CONN_RETRIED;
diff --git a/fs/splice.c b/fs/splice.c
index 0670c91..eeb1a86 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -320,7 +320,7 @@
 				break;
 
 			error = add_to_page_cache_lru(page, mapping, index,
-					      GFP_KERNEL);
+						mapping_gfp_mask(mapping));
 			if (unlikely(error)) {
 				page_cache_release(page);
 				if (error == -EEXIST)
@@ -370,8 +370,10 @@
 			 * for an in-flight io page
 			 */
 			if (flags & SPLICE_F_NONBLOCK) {
-				if (TestSetPageLocked(page))
+				if (TestSetPageLocked(page)) {
+					error = -EAGAIN;
 					break;
+				}
 			} else
 				lock_page(page);
 
@@ -479,9 +481,8 @@
 				 struct pipe_inode_info *pipe, size_t len,
 				 unsigned int flags)
 {
-	ssize_t spliced;
-	int ret;
 	loff_t isize, left;
+	int ret;
 
 	isize = i_size_read(in->f_mapping->host);
 	if (unlikely(*ppos >= isize))
@@ -491,29 +492,9 @@
 	if (unlikely(left < len))
 		len = left;
 
-	ret = 0;
-	spliced = 0;
-	while (len && !spliced) {
-		ret = __generic_file_splice_read(in, ppos, pipe, len, flags);
-
-		if (ret < 0)
-			break;
-		else if (!ret) {
-			if (spliced)
-				break;
-			if (flags & SPLICE_F_NONBLOCK) {
-				ret = -EAGAIN;
-				break;
-			}
-		}
-
+	ret = __generic_file_splice_read(in, ppos, pipe, len, flags);
+	if (ret > 0)
 		*ppos += ret;
-		len -= ret;
-		spliced += ret;
-	}
-
-	if (spliced)
-		return spliced;
 
 	return ret;
 }
diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c
index a9952e4..f34bd01 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl.c
@@ -732,7 +732,7 @@
 		 * Only allow the sys admin to reserve space unless
 		 * unwritten extents are enabled.
 		 */
-		if (!XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb) &&
+		if (!xfs_sb_version_hasextflgbit(&mp->m_sb) &&
 		    !capable(CAP_SYS_ADMIN))
 			return -EPERM;
 
diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c
index 1f3da5b..8e9c5ae 100644
--- a/fs/xfs/quota/xfs_qm.c
+++ b/fs/xfs/quota/xfs_qm.c
@@ -1405,13 +1405,13 @@
 #if defined(DEBUG) && defined(XFS_LOUD_RECOVERY)
 		unsigned oldv = mp->m_sb.sb_versionnum;
 #endif
-		ASSERT(!XFS_SB_VERSION_HASQUOTA(&mp->m_sb));
+		ASSERT(!xfs_sb_version_hasquota(&mp->m_sb));
 		ASSERT((sbfields & (XFS_SB_VERSIONNUM | XFS_SB_UQUOTINO |
 				   XFS_SB_GQUOTINO | XFS_SB_QFLAGS)) ==
 		       (XFS_SB_VERSIONNUM | XFS_SB_UQUOTINO |
 			XFS_SB_GQUOTINO | XFS_SB_QFLAGS));
 
-		XFS_SB_VERSION_ADDQUOTA(&mp->m_sb);
+		xfs_sb_version_addquota(&mp->m_sb);
 		mp->m_sb.sb_uquotino = NULLFSINO;
 		mp->m_sb.sb_gquotino = NULLFSINO;
 
@@ -1954,7 +1954,7 @@
 	/*
 	 * Get the uquota and gquota inodes
 	 */
-	if (XFS_SB_VERSION_HASQUOTA(&mp->m_sb)) {
+	if (xfs_sb_version_hasquota(&mp->m_sb)) {
 		if (XFS_IS_UQUOTA_ON(mp) &&
 		    mp->m_sb.sb_uquotino != NULLFSINO) {
 			ASSERT(mp->m_sb.sb_uquotino > 0);
diff --git a/fs/xfs/quota/xfs_qm_bhv.c b/fs/xfs/quota/xfs_qm_bhv.c
index 97bb329..f4f6c4c 100644
--- a/fs/xfs/quota/xfs_qm_bhv.c
+++ b/fs/xfs/quota/xfs_qm_bhv.c
@@ -118,7 +118,7 @@
 	*quotaflags = 0;
 	*needquotamount = B_FALSE;
 
-	quotaondisk = XFS_SB_VERSION_HASQUOTA(&mp->m_sb) &&
+	quotaondisk = xfs_sb_version_hasquota(&mp->m_sb) &&
 				(mp->m_sb.sb_qflags & XFS_ALL_QUOTA_ACCT);
 
 	if (quotaondisk) {
diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c
index 2cc5886..d2b8be7 100644
--- a/fs/xfs/quota/xfs_qm_syscalls.c
+++ b/fs/xfs/quota/xfs_qm_syscalls.c
@@ -377,7 +377,7 @@
 	if (!capable(CAP_SYS_ADMIN))
 		return XFS_ERROR(EPERM);
 	error = 0;
-	if (!XFS_SB_VERSION_HASQUOTA(&mp->m_sb) || flags == 0) {
+	if (!xfs_sb_version_hasquota(&mp->m_sb) || flags == 0) {
 		qdprintk("qtrunc flags=%x m_qflags=%x\n", flags, mp->m_qflags);
 		return XFS_ERROR(EINVAL);
 	}
@@ -522,7 +522,7 @@
 	memset(out, 0, sizeof(fs_quota_stat_t));
 
 	out->qs_version = FS_QSTAT_VERSION;
-	if (! XFS_SB_VERSION_HASQUOTA(&mp->m_sb)) {
+	if (!xfs_sb_version_hasquota(&mp->m_sb)) {
 		out->qs_uquota.qfs_ino = NULLFSINO;
 		out->qs_gquota.qfs_ino = NULLFSINO;
 		return (0);
diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c
index b08e2a2..96ba6aa 100644
--- a/fs/xfs/xfs_attr_leaf.c
+++ b/fs/xfs/xfs_attr_leaf.c
@@ -227,10 +227,10 @@
 xfs_sbversion_add_attr2(xfs_mount_t *mp, xfs_trans_t *tp)
 {
 	if ((mp->m_flags & XFS_MOUNT_ATTR2) &&
-	    !(XFS_SB_VERSION_HASATTR2(&mp->m_sb))) {
+	    !(xfs_sb_version_hasattr2(&mp->m_sb))) {
 		spin_lock(&mp->m_sb_lock);
-		if (!XFS_SB_VERSION_HASATTR2(&mp->m_sb)) {
-			XFS_SB_VERSION_ADDATTR2(&mp->m_sb);
+		if (!xfs_sb_version_hasattr2(&mp->m_sb)) {
+			xfs_sb_version_addattr2(&mp->m_sb);
 			spin_unlock(&mp->m_sb_lock);
 			xfs_mod_sb(tp, XFS_SB_VERSIONNUM | XFS_SB_FEATURES2);
 		} else
diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index 1c0a5a5..2def273 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -4047,17 +4047,17 @@
 		xfs_trans_log_inode(tp, ip, logflags);
 	if (error)
 		goto error2;
-	if (!XFS_SB_VERSION_HASATTR(&mp->m_sb) ||
-	   (!XFS_SB_VERSION_HASATTR2(&mp->m_sb) && version == 2)) {
+	if (!xfs_sb_version_hasattr(&mp->m_sb) ||
+	   (!xfs_sb_version_hasattr2(&mp->m_sb) && version == 2)) {
 		__int64_t sbfields = 0;
 
 		spin_lock(&mp->m_sb_lock);
-		if (!XFS_SB_VERSION_HASATTR(&mp->m_sb)) {
-			XFS_SB_VERSION_ADDATTR(&mp->m_sb);
+		if (!xfs_sb_version_hasattr(&mp->m_sb)) {
+			xfs_sb_version_addattr(&mp->m_sb);
 			sbfields |= XFS_SB_VERSIONNUM;
 		}
-		if (!XFS_SB_VERSION_HASATTR2(&mp->m_sb) && version == 2) {
-			XFS_SB_VERSION_ADDATTR2(&mp->m_sb);
+		if (!xfs_sb_version_hasattr2(&mp->m_sb) && version == 2) {
+			xfs_sb_version_addattr2(&mp->m_sb);
 			sbfields |= (XFS_SB_VERSIONNUM | XFS_SB_FEATURES2);
 		}
 		if (sbfields) {
@@ -5043,7 +5043,7 @@
 			 * A wasdelay extent has been initialized, so
 			 * shouldn't be flagged as unwritten.
 			 */
-			if (wr && XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb)) {
+			if (wr && xfs_sb_version_hasextflgbit(&mp->m_sb)) {
 				if (!wasdelay && (flags & XFS_BMAPI_PREALLOC))
 					got.br_state = XFS_EXT_UNWRITTEN;
 			}
@@ -5483,7 +5483,7 @@
 			 * get rid of part of a realtime extent.
 			 */
 			if (del.br_state == XFS_EXT_UNWRITTEN ||
-			    !XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb)) {
+			    !xfs_sb_version_hasextflgbit(&mp->m_sb)) {
 				/*
 				 * This piece is unwritten, or we're not
 				 * using unwritten extents.  Skip over it.
@@ -5535,7 +5535,7 @@
 			} else if ((del.br_startoff == start &&
 				    (del.br_state == XFS_EXT_UNWRITTEN ||
 				     xfs_trans_get_block_res(tp) == 0)) ||
-				   !XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb)) {
+				   !xfs_sb_version_hasextflgbit(&mp->m_sb)) {
 				/*
 				 * Can't make it unwritten.  There isn't
 				 * a full extent here so just skip it.
diff --git a/fs/xfs/xfs_bmap_btree.h b/fs/xfs/xfs_bmap_btree.h
index 2d950e9..cd0d4b4 100644
--- a/fs/xfs/xfs_bmap_btree.h
+++ b/fs/xfs/xfs_bmap_btree.h
@@ -120,7 +120,7 @@
  * Extent state and extent format macros.
  */
 #define XFS_EXTFMT_INODE(x)	\
-	(XFS_SB_VERSION_HASEXTFLGBIT(&((x)->i_mount->m_sb)) ? \
+	(xfs_sb_version_hasextflgbit(&((x)->i_mount->m_sb)) ? \
 		XFS_EXTFMT_HASSTATE : XFS_EXTFMT_NOSTATE)
 #define ISUNWRITTEN(x)	((x)->br_state == XFS_EXT_UNWRITTEN)
 
diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c
index be7c425..e92e73f 100644
--- a/fs/xfs/xfs_dir2.c
+++ b/fs/xfs/xfs_dir2.c
@@ -49,7 +49,7 @@
 xfs_dir_mount(
 	xfs_mount_t	*mp)
 {
-	ASSERT(XFS_SB_VERSION_HASDIRV2(&mp->m_sb));
+	ASSERT(xfs_sb_version_hasdirv2(&mp->m_sb));
 	ASSERT((1 << (mp->m_sb.sb_blocklog + mp->m_sb.sb_dirblklog)) <=
 	       XFS_MAX_BLOCKSIZE);
 	mp->m_dirblksize = 1 << (mp->m_sb.sb_blocklog + mp->m_sb.sb_dirblklog);
diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c
index eadc159..d3a0f53 100644
--- a/fs/xfs/xfs_fsops.c
+++ b/fs/xfs/xfs_fsops.c
@@ -77,36 +77,36 @@
 	if (new_version >= 3) {
 		geo->version = XFS_FSOP_GEOM_VERSION;
 		geo->flags =
-			(XFS_SB_VERSION_HASATTR(&mp->m_sb) ?
+			(xfs_sb_version_hasattr(&mp->m_sb) ?
 				XFS_FSOP_GEOM_FLAGS_ATTR : 0) |
-			(XFS_SB_VERSION_HASNLINK(&mp->m_sb) ?
+			(xfs_sb_version_hasnlink(&mp->m_sb) ?
 				XFS_FSOP_GEOM_FLAGS_NLINK : 0) |
-			(XFS_SB_VERSION_HASQUOTA(&mp->m_sb) ?
+			(xfs_sb_version_hasquota(&mp->m_sb) ?
 				XFS_FSOP_GEOM_FLAGS_QUOTA : 0) |
-			(XFS_SB_VERSION_HASALIGN(&mp->m_sb) ?
+			(xfs_sb_version_hasalign(&mp->m_sb) ?
 				XFS_FSOP_GEOM_FLAGS_IALIGN : 0) |
-			(XFS_SB_VERSION_HASDALIGN(&mp->m_sb) ?
+			(xfs_sb_version_hasdalign(&mp->m_sb) ?
 				XFS_FSOP_GEOM_FLAGS_DALIGN : 0) |
-			(XFS_SB_VERSION_HASSHARED(&mp->m_sb) ?
+			(xfs_sb_version_hasshared(&mp->m_sb) ?
 				XFS_FSOP_GEOM_FLAGS_SHARED : 0) |
-			(XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb) ?
+			(xfs_sb_version_hasextflgbit(&mp->m_sb) ?
 				XFS_FSOP_GEOM_FLAGS_EXTFLG : 0) |
-			(XFS_SB_VERSION_HASDIRV2(&mp->m_sb) ?
+			(xfs_sb_version_hasdirv2(&mp->m_sb) ?
 				XFS_FSOP_GEOM_FLAGS_DIRV2 : 0) |
-			(XFS_SB_VERSION_HASSECTOR(&mp->m_sb) ?
+			(xfs_sb_version_hassector(&mp->m_sb) ?
 				XFS_FSOP_GEOM_FLAGS_SECTOR : 0) |
 			(xfs_sb_version_haslazysbcount(&mp->m_sb) ?
 				XFS_FSOP_GEOM_FLAGS_LAZYSB : 0) |
-			(XFS_SB_VERSION_HASATTR2(&mp->m_sb) ?
+			(xfs_sb_version_hasattr2(&mp->m_sb) ?
 				XFS_FSOP_GEOM_FLAGS_ATTR2 : 0);
-		geo->logsectsize = XFS_SB_VERSION_HASSECTOR(&mp->m_sb) ?
+		geo->logsectsize = xfs_sb_version_hassector(&mp->m_sb) ?
 				mp->m_sb.sb_logsectsize : BBSIZE;
 		geo->rtsectsize = mp->m_sb.sb_blocksize;
 		geo->dirblocksize = mp->m_dirblksize;
 	}
 	if (new_version >= 4) {
 		geo->flags |=
-			(XFS_SB_VERSION_HASLOGV2(&mp->m_sb) ?
+			(xfs_sb_version_haslogv2(&mp->m_sb) ?
 				XFS_FSOP_GEOM_FLAGS_LOGV2 : 0);
 		geo->logsunit = mp->m_sb.sb_logsunit;
 	}
diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c
index db9d5fa..5a146cb 100644
--- a/fs/xfs/xfs_ialloc.c
+++ b/fs/xfs/xfs_ialloc.c
@@ -191,7 +191,7 @@
 			ASSERT(!(args.mp->m_flags & XFS_MOUNT_NOALIGN));
 			args.alignment = args.mp->m_dalign;
 			isaligned = 1;
-		} else if (XFS_SB_VERSION_HASALIGN(&args.mp->m_sb) &&
+		} else if (xfs_sb_version_hasalign(&args.mp->m_sb) &&
 			   args.mp->m_sb.sb_inoalignmt >=
 			   XFS_B_TO_FSBT(args.mp,
 			  	XFS_INODE_CLUSTER_SIZE(args.mp)))
@@ -230,7 +230,7 @@
 		args.agbno = be32_to_cpu(agi->agi_root);
 		args.fsbno = XFS_AGB_TO_FSB(args.mp,
 				be32_to_cpu(agi->agi_seqno), args.agbno);
-		if (XFS_SB_VERSION_HASALIGN(&args.mp->m_sb) &&
+		if (xfs_sb_version_hasalign(&args.mp->m_sb) &&
 			args.mp->m_sb.sb_inoalignmt >=
 			XFS_B_TO_FSBT(args.mp, XFS_INODE_CLUSTER_SIZE(args.mp)))
 				args.alignment = args.mp->m_sb.sb_inoalignmt;
@@ -271,7 +271,7 @@
 	 * use the old version so that old kernels will continue to be
 	 * able to use the file system.
 	 */
-	if (XFS_SB_VERSION_HASNLINK(&args.mp->m_sb))
+	if (xfs_sb_version_hasnlink(&args.mp->m_sb))
 		version = XFS_DINODE_VERSION_2;
 	else
 		version = XFS_DINODE_VERSION_1;
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index a550546a..f43a6e0 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -1147,7 +1147,7 @@
 	 * the inode version number now.  This way we only do the conversion
 	 * here rather than here and in the flush/logging code.
 	 */
-	if (XFS_SB_VERSION_HASNLINK(&tp->t_mountp->m_sb) &&
+	if (xfs_sb_version_hasnlink(&tp->t_mountp->m_sb) &&
 	    ip->i_d.di_version == XFS_DINODE_VERSION_1) {
 		ip->i_d.di_version = XFS_DINODE_VERSION_2;
 		/*
@@ -3434,9 +3434,9 @@
 	 * has been updated, then make the conversion permanent.
 	 */
 	ASSERT(ip->i_d.di_version == XFS_DINODE_VERSION_1 ||
-	       XFS_SB_VERSION_HASNLINK(&mp->m_sb));
+	       xfs_sb_version_hasnlink(&mp->m_sb));
 	if (ip->i_d.di_version == XFS_DINODE_VERSION_1) {
-		if (!XFS_SB_VERSION_HASNLINK(&mp->m_sb)) {
+		if (!xfs_sb_version_hasnlink(&mp->m_sb)) {
 			/*
 			 * Convert it back.
 			 */
diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
index 034ca72..2c775b4 100644
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -296,9 +296,9 @@
 	 */
 	mp = ip->i_mount;
 	ASSERT(ip->i_d.di_version == XFS_DINODE_VERSION_1 ||
-	       XFS_SB_VERSION_HASNLINK(&mp->m_sb));
+	       xfs_sb_version_hasnlink(&mp->m_sb));
 	if (ip->i_d.di_version == XFS_DINODE_VERSION_1) {
-		if (!XFS_SB_VERSION_HASNLINK(&mp->m_sb)) {
+		if (!xfs_sb_version_hasnlink(&mp->m_sb)) {
 			/*
 			 * Convert it back.
 			 */
diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c
index 658aab6..f615e04 100644
--- a/fs/xfs/xfs_itable.c
+++ b/fs/xfs/xfs_itable.c
@@ -45,7 +45,7 @@
 	xfs_ino_t	ino)
 {
 	return (ino == mp->m_sb.sb_rbmino || ino == mp->m_sb.sb_rsumino ||
-		(XFS_SB_VERSION_HASQUOTA(&mp->m_sb) &&
+		(xfs_sb_version_hasquota(&mp->m_sb) &&
 		 (ino == mp->m_sb.sb_uquotino || ino == mp->m_sb.sb_gquotino)));
 }
 
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index a75edca..31f2b04 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -1090,7 +1090,7 @@
 			size >>= 1;
 		}
 
-		if (XFS_SB_VERSION_HASLOGV2(&mp->m_sb)) {
+		if (xfs_sb_version_haslogv2(&mp->m_sb)) {
 			/* # headers = size / 32K
 			 * one header holds cycles from 32K of data
 			 */
@@ -1186,13 +1186,13 @@
 	log->l_grant_reserve_cycle = 1;
 	log->l_grant_write_cycle = 1;
 
-	if (XFS_SB_VERSION_HASSECTOR(&mp->m_sb)) {
+	if (xfs_sb_version_hassector(&mp->m_sb)) {
 		log->l_sectbb_log = mp->m_sb.sb_logsectlog - BBSHIFT;
 		ASSERT(log->l_sectbb_log <= mp->m_sectbb_log);
 		/* for larger sector sizes, must have v2 or external log */
 		ASSERT(log->l_sectbb_log == 0 ||
 			log->l_logBBstart == 0 ||
-			XFS_SB_VERSION_HASLOGV2(&mp->m_sb));
+			xfs_sb_version_haslogv2(&mp->m_sb));
 		ASSERT(mp->m_sb.sb_logsectlog >= BBSHIFT);
 	}
 	log->l_sectbb_mask = (1 << log->l_sectbb_log) - 1;
@@ -1247,7 +1247,7 @@
 		memset(head, 0, sizeof(xlog_rec_header_t));
 		head->h_magicno = cpu_to_be32(XLOG_HEADER_MAGIC_NUM);
 		head->h_version = cpu_to_be32(
-			XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) ? 2 : 1);
+			xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? 2 : 1);
 		head->h_size = cpu_to_be32(log->l_iclog_size);
 		/* new fields */
 		head->h_fmt = cpu_to_be32(XLOG_FMT);
@@ -1402,7 +1402,7 @@
 	int		roundoff;       /* roundoff to BB or stripe */
 	int		split = 0;	/* split write into two regions */
 	int		error;
-	int		v2 = XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb);
+	int		v2 = xfs_sb_version_haslogv2(&log->l_mp->m_sb);
 
 	XFS_STATS_INC(xs_log_writes);
 	ASSERT(iclog->ic_refcnt == 0);
@@ -2881,7 +2881,7 @@
 	log->l_curr_block += BTOBB(eventual_size)+BTOBB(log->l_iclog_hsize);
 
 	/* Round up to next log-sunit */
-	if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) &&
+	if (xfs_sb_version_haslogv2(&log->l_mp->m_sb) &&
 	    log->l_mp->m_sb.sb_logsunit > 1) {
 		__uint32_t sunit_bb = BTOBB(log->l_mp->m_sb.sb_logsunit);
 		log->l_curr_block = roundup(log->l_curr_block, sunit_bb);
@@ -3334,7 +3334,7 @@
 	unit_bytes += sizeof(xlog_op_header_t) * num_headers;
 
 	/* for roundoff padding for transaction data and one for commit record */
-	if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) &&
+	if (xfs_sb_version_haslogv2(&log->l_mp->m_sb) &&
 	    log->l_mp->m_sb.sb_logsunit > 1) {
 		/* log su roundoff */
 		unit_bytes += 2*log->l_mp->m_sb.sb_logsunit;
diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h
index e008233..c6244cc 100644
--- a/fs/xfs/xfs_log_priv.h
+++ b/fs/xfs/xfs_log_priv.h
@@ -49,10 +49,10 @@
 #define XLOG_HEADER_SIZE	512
 
 #define XLOG_REC_SHIFT(log) \
-	BTOBB(1 << (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) ? \
+	BTOBB(1 << (xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? \
 	 XLOG_MAX_RECORD_BSHIFT : XLOG_BIG_RECORD_BSHIFT))
 #define XLOG_TOTAL_REC_SHIFT(log) \
-	BTOBB(XLOG_MAX_ICLOGS << (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) ? \
+	BTOBB(XLOG_MAX_ICLOGS << (xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? \
 	 XLOG_MAX_RECORD_BSHIFT : XLOG_BIG_RECORD_BSHIFT))
 
 
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index b82d5d4..b2b70eb 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -478,7 +478,7 @@
 	 * reset last_blk.  Only when last_blk points in the middle of a log
 	 * record do we update last_blk.
 	 */
-	if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) {
+	if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
 		uint	h_size = be32_to_cpu(head->h_size);
 
 		xhdrs = h_size / XLOG_HEADER_CYCLE_SIZE;
@@ -888,7 +888,7 @@
 	 * unmount record if there is one, so we pass the lsn of the
 	 * unmount record rather than the block after it.
 	 */
-	if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) {
+	if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
 		int	h_size = be32_to_cpu(rhead->h_size);
 		int	h_version = be32_to_cpu(rhead->h_version);
 
@@ -1101,7 +1101,7 @@
 	recp->h_magicno = cpu_to_be32(XLOG_HEADER_MAGIC_NUM);
 	recp->h_cycle = cpu_to_be32(cycle);
 	recp->h_version = cpu_to_be32(
-			XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) ? 2 : 1);
+			xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? 2 : 1);
 	recp->h_lsn = cpu_to_be64(xlog_assign_lsn(cycle, block));
 	recp->h_tail_lsn = cpu_to_be64(xlog_assign_lsn(tail_cycle, tail_block));
 	recp->h_fmt = cpu_to_be32(XLOG_FMT);
@@ -3348,7 +3348,7 @@
 		dp += BBSIZE;
 	}
 
-	if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) {
+	if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
 		xhdr = (xlog_in_core_2_t *)&iclog->ic_header;
 		for ( ; i < BTOBB(size); i++) {
 			j = i / (XLOG_HEADER_CYCLE_SIZE / BBSIZE);
@@ -3388,7 +3388,7 @@
 			    be32_to_cpu(rhead->h_chksum), chksum);
 		    cmn_err(CE_DEBUG,
 "XFS: Disregard message if filesystem was created with non-DEBUG kernel");
-		    if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) {
+		    if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
 			    cmn_err(CE_DEBUG,
 				"XFS: LogR this is a LogV2 filesystem\n");
 		    }
@@ -3415,7 +3415,7 @@
 		dp += BBSIZE;
 	}
 
-	if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) {
+	if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
 		xhdr = (xlog_in_core_2_t *)rhead;
 		for ( ; i < BTOBB(be32_to_cpu(rhead->h_len)); i++) {
 			j = i / (XLOG_HEADER_CYCLE_SIZE / BBSIZE);
@@ -3494,7 +3494,7 @@
 	 * Read the header of the tail block and get the iclog buffer size from
 	 * h_size.  Use this to tell how many sectors make up the log header.
 	 */
-	if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) {
+	if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
 		/*
 		 * When using variable length iclogs, read first sector of
 		 * iclog header and extract the header size from it.  Get a
@@ -3838,7 +3838,7 @@
 	sbp = &log->l_mp->m_sb;
 	xfs_sb_from_disk(sbp, XFS_BUF_TO_SBP(bp));
 	ASSERT(sbp->sb_magicnum == XFS_SB_MAGIC);
-	ASSERT(XFS_SB_GOOD_VERSION(sbp));
+	ASSERT(xfs_sb_good_version(sbp));
 	xfs_buf_relse(bp);
 
 	/* We've re-read the superblock so re-initialize per-cpu counters */
diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index 6409b37..8ed164e 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -44,7 +44,7 @@
 #include "xfs_quota.h"
 #include "xfs_fsops.h"
 
-STATIC void	xfs_mount_log_sbunit(xfs_mount_t *, __int64_t);
+STATIC void	xfs_mount_log_sb(xfs_mount_t *, __int64_t);
 STATIC int	xfs_uuid_mount(xfs_mount_t *);
 STATIC void	xfs_uuid_unmount(xfs_mount_t *mp);
 STATIC void	xfs_unmountfs_wait(xfs_mount_t *);
@@ -119,6 +119,7 @@
     { offsetof(xfs_sb_t, sb_logsectsize),0 },
     { offsetof(xfs_sb_t, sb_logsunit),	 0 },
     { offsetof(xfs_sb_t, sb_features2),	 0 },
+    { offsetof(xfs_sb_t, sb_bad_features2), 0 },
     { sizeof(xfs_sb_t),			 0 }
 };
 
@@ -225,7 +226,7 @@
 		return XFS_ERROR(EWRONGFS);
 	}
 
-	if (!XFS_SB_GOOD_VERSION(sbp)) {
+	if (!xfs_sb_good_version(sbp)) {
 		xfs_fs_mount_cmn_err(flags, "bad version");
 		return XFS_ERROR(EWRONGFS);
 	}
@@ -300,7 +301,7 @@
 	/*
 	 * Version 1 directory format has never worked on Linux.
 	 */
-	if (unlikely(!XFS_SB_VERSION_HASDIRV2(sbp))) {
+	if (unlikely(!xfs_sb_version_hasdirv2(sbp))) {
 		xfs_fs_mount_cmn_err(flags,
 			"file system using version 1 directory format");
 		return XFS_ERROR(ENOSYS);
@@ -449,6 +450,7 @@
 	to->sb_logsectsize = be16_to_cpu(from->sb_logsectsize);
 	to->sb_logsunit = be32_to_cpu(from->sb_logsunit);
 	to->sb_features2 = be32_to_cpu(from->sb_features2);
+	to->sb_bad_features2 = be32_to_cpu(from->sb_bad_features2);
 }
 
 /*
@@ -781,7 +783,7 @@
 		 * Update superblock with new values
 		 * and log changes
 		 */
-		if (XFS_SB_VERSION_HASDALIGN(sbp)) {
+		if (xfs_sb_version_hasdalign(sbp)) {
 			if (sbp->sb_unit != mp->m_dalign) {
 				sbp->sb_unit = mp->m_dalign;
 				*update_flags |= XFS_SB_UNIT;
@@ -792,7 +794,7 @@
 			}
 		}
 	} else if ((mp->m_flags & XFS_MOUNT_NOALIGN) != XFS_MOUNT_NOALIGN &&
-		    XFS_SB_VERSION_HASDALIGN(&mp->m_sb)) {
+		    xfs_sb_version_hasdalign(&mp->m_sb)) {
 			mp->m_dalign = sbp->sb_unit;
 			mp->m_swidth = sbp->sb_width;
 	}
@@ -869,7 +871,7 @@
 STATIC void
 xfs_set_inoalignment(xfs_mount_t *mp)
 {
-	if (XFS_SB_VERSION_HASALIGN(&mp->m_sb) &&
+	if (xfs_sb_version_hasalign(&mp->m_sb) &&
 	    mp->m_sb.sb_inoalignmt >=
 	    XFS_B_TO_FSBT(mp, mp->m_inode_cluster_size))
 		mp->m_inoalign_mask = mp->m_sb.sb_inoalignmt - 1;
@@ -970,6 +972,38 @@
 	xfs_mount_common(mp, sbp);
 
 	/*
+	 * Check for a mismatched features2 values.  Older kernels
+	 * read & wrote into the wrong sb offset for sb_features2
+	 * on some platforms due to xfs_sb_t not being 64bit size aligned
+	 * when sb_features2 was added, which made older superblock
+	 * reading/writing routines swap it as a 64-bit value.
+	 *
+	 * For backwards compatibility, we make both slots equal.
+	 *
+	 * If we detect a mismatched field, we OR the set bits into the
+	 * existing features2 field in case it has already been modified; we
+	 * don't want to lose any features.  We then update the bad location
+	 * with the ORed value so that older kernels will see any features2
+	 * flags, and mark the two fields as needing updates once the
+	 * transaction subsystem is online.
+	 */
+	if (xfs_sb_has_mismatched_features2(sbp)) {
+		cmn_err(CE_WARN,
+			"XFS: correcting sb_features alignment problem");
+		sbp->sb_features2 |= sbp->sb_bad_features2;
+		sbp->sb_bad_features2 = sbp->sb_features2;
+		update_flags |= XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2;
+
+		/*
+		 * Re-check for ATTR2 in case it was found in bad_features2
+		 * slot.
+		 */
+		if (xfs_sb_version_hasattr2(&mp->m_sb))
+			mp->m_flags |= XFS_MOUNT_ATTR2;
+
+	}
+
+	/*
 	 * Check if sb_agblocks is aligned at stripe boundary
 	 * If sb_agblocks is NOT aligned turn off m_dalign since
 	 * allocator alignment is within an ag, therefore ag has
@@ -1159,11 +1193,10 @@
 	}
 
 	/*
-	 * If fs is not mounted readonly, then update the superblock
-	 * unit and width changes.
+	 * If fs is not mounted readonly, then update the superblock changes.
 	 */
 	if (update_flags && !(mp->m_flags & XFS_MOUNT_RDONLY))
-		xfs_mount_log_sbunit(mp, update_flags);
+		xfs_mount_log_sb(mp, update_flags);
 
 	/*
 	 * Initialise the XFS quota management subsystem for this mount
@@ -1875,16 +1908,18 @@
 
 /*
  * Used to log changes to the superblock unit and width fields which could
- * be altered by the mount options. Only the first superblock is updated.
+ * be altered by the mount options, as well as any potential sb_features2
+ * fixup. Only the first superblock is updated.
  */
 STATIC void
-xfs_mount_log_sbunit(
+xfs_mount_log_sb(
 	xfs_mount_t	*mp,
 	__int64_t	fields)
 {
 	xfs_trans_t	*tp;
 
-	ASSERT(fields & (XFS_SB_UNIT|XFS_SB_WIDTH|XFS_SB_UUID));
+	ASSERT(fields & (XFS_SB_UNIT | XFS_SB_WIDTH | XFS_SB_UUID |
+			 XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2));
 
 	tp = xfs_trans_alloc(mp, XFS_TRANS_SB_UNIT);
 	if (xfs_trans_reserve(tp, 0, mp->m_sb.sb_sectsize + 128, 0, 0,
diff --git a/fs/xfs/xfs_sb.h b/fs/xfs/xfs_sb.h
index 94660b1..d904efe 100644
--- a/fs/xfs/xfs_sb.h
+++ b/fs/xfs/xfs_sb.h
@@ -89,6 +89,7 @@
 
 /*
  * Superblock - in core version.  Must match the ondisk version below.
+ * Must be padded to 64 bit alignment.
  */
 typedef struct xfs_sb {
 	__uint32_t	sb_magicnum;	/* magic number == XFS_SB_MAGIC */
@@ -145,10 +146,21 @@
 	__uint16_t	sb_logsectsize;	/* sector size for the log, bytes */
 	__uint32_t	sb_logsunit;	/* stripe unit size for the log */
 	__uint32_t	sb_features2;	/* additional feature bits */
+
+	/*
+	 * bad features2 field as a result of failing to pad the sb
+	 * structure to 64 bits. Some machines will be using this field
+	 * for features2 bits. Easiest just to mark it bad and not use
+	 * it for anything else.
+	 */
+	__uint32_t	sb_bad_features2;
+
+	/* must be padded to 64 bit alignment */
 } xfs_sb_t;
 
 /*
- * Superblock - on disk version.  Must match the in core version below.
+ * Superblock - on disk version.  Must match the in core version above.
+ * Must be padded to 64 bit alignment.
  */
 typedef struct xfs_dsb {
 	__be32		sb_magicnum;	/* magic number == XFS_SB_MAGIC */
@@ -205,6 +217,15 @@
 	__be16		sb_logsectsize;	/* sector size for the log, bytes */
 	__be32		sb_logsunit;	/* stripe unit size for the log */
 	__be32		sb_features2;	/* additional feature bits */
+	/*
+	 * bad features2 field as a result of failing to pad the sb
+	 * structure to 64 bits. Some machines will be using this field
+	 * for features2 bits. Easiest just to mark it bad and not use
+	 * it for anything else.
+	 */
+	__be32	sb_bad_features2;
+
+	/* must be padded to 64 bit alignment */
 } xfs_dsb_t;
 
 /*
@@ -223,7 +244,7 @@
 	XFS_SBS_GQUOTINO, XFS_SBS_QFLAGS, XFS_SBS_FLAGS, XFS_SBS_SHARED_VN,
 	XFS_SBS_INOALIGNMT, XFS_SBS_UNIT, XFS_SBS_WIDTH, XFS_SBS_DIRBLKLOG,
 	XFS_SBS_LOGSECTLOG, XFS_SBS_LOGSECTSIZE, XFS_SBS_LOGSUNIT,
-	XFS_SBS_FEATURES2,
+	XFS_SBS_FEATURES2, XFS_SBS_BAD_FEATURES2,
 	XFS_SBS_FIELDCOUNT
 } xfs_sb_field_t;
 
@@ -248,13 +269,15 @@
 #define XFS_SB_IFREE		XFS_SB_MVAL(IFREE)
 #define XFS_SB_FDBLOCKS		XFS_SB_MVAL(FDBLOCKS)
 #define XFS_SB_FEATURES2	XFS_SB_MVAL(FEATURES2)
+#define XFS_SB_BAD_FEATURES2	XFS_SB_MVAL(BAD_FEATURES2)
 #define	XFS_SB_NUM_BITS		((int)XFS_SBS_FIELDCOUNT)
 #define	XFS_SB_ALL_BITS		((1LL << XFS_SB_NUM_BITS) - 1)
 #define	XFS_SB_MOD_BITS		\
 	(XFS_SB_UUID | XFS_SB_ROOTINO | XFS_SB_RBMINO | XFS_SB_RSUMINO | \
 	 XFS_SB_VERSIONNUM | XFS_SB_UQUOTINO | XFS_SB_GQUOTINO | \
 	 XFS_SB_QFLAGS | XFS_SB_SHARED_VN | XFS_SB_UNIT | XFS_SB_WIDTH | \
-	 XFS_SB_ICOUNT | XFS_SB_IFREE | XFS_SB_FDBLOCKS | XFS_SB_FEATURES2)
+	 XFS_SB_ICOUNT | XFS_SB_IFREE | XFS_SB_FDBLOCKS | XFS_SB_FEATURES2 | \
+	 XFS_SB_BAD_FEATURES2)
 
 
 /*
@@ -271,7 +294,6 @@
 
 #define	XFS_SB_VERSION_NUM(sbp)	((sbp)->sb_versionnum & XFS_SB_VERSION_NUMBITS)
 
-#define	XFS_SB_GOOD_VERSION(sbp)	xfs_sb_good_version(sbp)
 #ifdef __KERNEL__
 static inline int xfs_sb_good_version(xfs_sb_t *sbp)
 {
@@ -297,7 +319,15 @@
 }
 #endif /* __KERNEL__ */
 
-#define	XFS_SB_VERSION_TONEW(v)	xfs_sb_version_tonew(v)
+/*
+ * Detect a mismatched features2 field.  Older kernels read/wrote
+ * this into the wrong slot, so to be safe we keep them in sync.
+ */
+static inline int xfs_sb_has_mismatched_features2(xfs_sb_t *sbp)
+{
+	return (sbp->sb_bad_features2 != sbp->sb_features2);
+}
+
 static inline unsigned xfs_sb_version_tonew(unsigned v)
 {
 	return ((((v) == XFS_SB_VERSION_1) ? \
@@ -308,7 +338,6 @@
 		XFS_SB_VERSION_4);
 }
 
-#define	XFS_SB_VERSION_TOOLD(v)	xfs_sb_version_toold(v)
 static inline unsigned xfs_sb_version_toold(unsigned v)
 {
 	return (((v) & (XFS_SB_VERSION_QUOTABIT | XFS_SB_VERSION_ALIGNBIT)) ? \
@@ -320,7 +349,6 @@
 				XFS_SB_VERSION_1)));
 }
 
-#define	XFS_SB_VERSION_HASATTR(sbp)	xfs_sb_version_hasattr(sbp)
 static inline int xfs_sb_version_hasattr(xfs_sb_t *sbp)
 {
 	return ((sbp)->sb_versionnum == XFS_SB_VERSION_2) || \
@@ -329,7 +357,6 @@
 		  ((sbp)->sb_versionnum & XFS_SB_VERSION_ATTRBIT));
 }
 
-#define	XFS_SB_VERSION_ADDATTR(sbp)	xfs_sb_version_addattr(sbp)
 static inline void xfs_sb_version_addattr(xfs_sb_t *sbp)
 {
 	(sbp)->sb_versionnum = (((sbp)->sb_versionnum == XFS_SB_VERSION_1) ? \
@@ -339,7 +366,6 @@
 			(XFS_SB_VERSION_4 | XFS_SB_VERSION_ATTRBIT)));
 }
 
-#define	XFS_SB_VERSION_HASNLINK(sbp)	xfs_sb_version_hasnlink(sbp)
 static inline int xfs_sb_version_hasnlink(xfs_sb_t *sbp)
 {
 	return ((sbp)->sb_versionnum == XFS_SB_VERSION_3) || \
@@ -347,7 +373,6 @@
 		  ((sbp)->sb_versionnum & XFS_SB_VERSION_NLINKBIT));
 }
 
-#define	XFS_SB_VERSION_ADDNLINK(sbp)	xfs_sb_version_addnlink(sbp)
 static inline void xfs_sb_version_addnlink(xfs_sb_t *sbp)
 {
 	(sbp)->sb_versionnum = ((sbp)->sb_versionnum <= XFS_SB_VERSION_2 ? \
@@ -355,115 +380,63 @@
 		((sbp)->sb_versionnum | XFS_SB_VERSION_NLINKBIT));
 }
 
-#define	XFS_SB_VERSION_HASQUOTA(sbp)	xfs_sb_version_hasquota(sbp)
 static inline int xfs_sb_version_hasquota(xfs_sb_t *sbp)
 {
 	return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
 		((sbp)->sb_versionnum & XFS_SB_VERSION_QUOTABIT);
 }
 
-#define	XFS_SB_VERSION_ADDQUOTA(sbp)	xfs_sb_version_addquota(sbp)
 static inline void xfs_sb_version_addquota(xfs_sb_t *sbp)
 {
 	(sbp)->sb_versionnum = \
 		 (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4 ? \
 			((sbp)->sb_versionnum | XFS_SB_VERSION_QUOTABIT) : \
-			(XFS_SB_VERSION_TONEW((sbp)->sb_versionnum) | \
+			(xfs_sb_version_tonew((sbp)->sb_versionnum) | \
 			 XFS_SB_VERSION_QUOTABIT));
 }
 
-#define	XFS_SB_VERSION_HASALIGN(sbp)	xfs_sb_version_hasalign(sbp)
 static inline int xfs_sb_version_hasalign(xfs_sb_t *sbp)
 {
 	return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
 		((sbp)->sb_versionnum & XFS_SB_VERSION_ALIGNBIT);
 }
 
-#define	XFS_SB_VERSION_SUBALIGN(sbp)	xfs_sb_version_subalign(sbp)
-static inline void xfs_sb_version_subalign(xfs_sb_t *sbp)
-{
-	(sbp)->sb_versionnum = \
-	 XFS_SB_VERSION_TOOLD((sbp)->sb_versionnum & ~XFS_SB_VERSION_ALIGNBIT);
-}
-
-#define XFS_SB_VERSION_HASDALIGN(sbp)	xfs_sb_version_hasdalign(sbp)
 static inline int xfs_sb_version_hasdalign(xfs_sb_t *sbp)
 {
 	return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
 		((sbp)->sb_versionnum & XFS_SB_VERSION_DALIGNBIT);
 }
 
-#define XFS_SB_VERSION_ADDDALIGN(sbp)	xfs_sb_version_adddalign(sbp)
-static inline int xfs_sb_version_adddalign(xfs_sb_t *sbp)
-{
-	return (sbp)->sb_versionnum = \
-		((sbp)->sb_versionnum | XFS_SB_VERSION_DALIGNBIT);
-}
-
-#define XFS_SB_VERSION_HASSHARED(sbp)	xfs_sb_version_hasshared(sbp)
 static inline int xfs_sb_version_hasshared(xfs_sb_t *sbp)
 {
 	return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
 		((sbp)->sb_versionnum & XFS_SB_VERSION_SHAREDBIT);
 }
 
-#define XFS_SB_VERSION_ADDSHARED(sbp)	xfs_sb_version_addshared(sbp)
-static inline int xfs_sb_version_addshared(xfs_sb_t *sbp)
-{
-	return (sbp)->sb_versionnum = \
-		((sbp)->sb_versionnum | XFS_SB_VERSION_SHAREDBIT);
-}
-
-#define XFS_SB_VERSION_SUBSHARED(sbp)	xfs_sb_version_subshared(sbp)
-static inline int xfs_sb_version_subshared(xfs_sb_t *sbp)
-{
-	return (sbp)->sb_versionnum = \
-		((sbp)->sb_versionnum & ~XFS_SB_VERSION_SHAREDBIT);
-}
-
-#define XFS_SB_VERSION_HASDIRV2(sbp)	xfs_sb_version_hasdirv2(sbp)
 static inline int xfs_sb_version_hasdirv2(xfs_sb_t *sbp)
 {
 	return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
 		((sbp)->sb_versionnum & XFS_SB_VERSION_DIRV2BIT);
 }
 
-#define XFS_SB_VERSION_HASLOGV2(sbp)   xfs_sb_version_haslogv2(sbp)
 static inline int xfs_sb_version_haslogv2(xfs_sb_t *sbp)
 {
 	return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
 		((sbp)->sb_versionnum & XFS_SB_VERSION_LOGV2BIT);
 }
 
-#define XFS_SB_VERSION_HASEXTFLGBIT(sbp)	xfs_sb_version_hasextflgbit(sbp)
 static inline int xfs_sb_version_hasextflgbit(xfs_sb_t *sbp)
 {
 	return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
 		((sbp)->sb_versionnum & XFS_SB_VERSION_EXTFLGBIT);
 }
 
-#define XFS_SB_VERSION_ADDEXTFLGBIT(sbp)	xfs_sb_version_addextflgbit(sbp)
-static inline int xfs_sb_version_addextflgbit(xfs_sb_t *sbp)
-{
-	return (sbp)->sb_versionnum = \
-		((sbp)->sb_versionnum | XFS_SB_VERSION_EXTFLGBIT);
-}
-
-#define XFS_SB_VERSION_SUBEXTFLGBIT(sbp)	xfs_sb_version_subextflgbit(sbp)
-static inline int xfs_sb_version_subextflgbit(xfs_sb_t *sbp)
-{
-	return (sbp)->sb_versionnum = \
-		((sbp)->sb_versionnum & ~XFS_SB_VERSION_EXTFLGBIT);
-}
-
-#define XFS_SB_VERSION_HASSECTOR(sbp)   xfs_sb_version_hassector(sbp)
 static inline int xfs_sb_version_hassector(xfs_sb_t *sbp)
 {
 	return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
 		((sbp)->sb_versionnum & XFS_SB_VERSION_SECTORBIT);
 }
 
-#define XFS_SB_VERSION_HASMOREBITS(sbp)	xfs_sb_version_hasmorebits(sbp)
 static inline int xfs_sb_version_hasmorebits(xfs_sb_t *sbp)
 {
 	return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
@@ -476,24 +449,22 @@
  * For example, for a bit defined as XFS_SB_VERSION2_FUNBIT, has a macro:
  *
  * SB_VERSION_HASFUNBIT(xfs_sb_t *sbp)
- *	((XFS_SB_VERSION_HASMOREBITS(sbp) &&
+ *	((xfs_sb_version_hasmorebits(sbp) &&
  *	 ((sbp)->sb_features2 & XFS_SB_VERSION2_FUNBIT)
  */
 
 static inline int xfs_sb_version_haslazysbcount(xfs_sb_t *sbp)
 {
-	return (XFS_SB_VERSION_HASMOREBITS(sbp) &&	\
+	return (xfs_sb_version_hasmorebits(sbp) &&	\
 		((sbp)->sb_features2 & XFS_SB_VERSION2_LAZYSBCOUNTBIT));
 }
 
-#define XFS_SB_VERSION_HASATTR2(sbp)	xfs_sb_version_hasattr2(sbp)
 static inline int xfs_sb_version_hasattr2(xfs_sb_t *sbp)
 {
-	return (XFS_SB_VERSION_HASMOREBITS(sbp)) &&	\
+	return (xfs_sb_version_hasmorebits(sbp)) &&	\
 		((sbp)->sb_features2 & XFS_SB_VERSION2_ATTR2BIT);
 }
 
-#define XFS_SB_VERSION_ADDATTR2(sbp)	xfs_sb_version_addattr2(sbp)
 static inline void xfs_sb_version_addattr2(xfs_sb_t *sbp)
 {
 	((sbp)->sb_versionnum =	\
diff --git a/fs/xfs/xfs_utils.c b/fs/xfs/xfs_utils.c
index 45d740df5..18a85e7 100644
--- a/fs/xfs/xfs_utils.c
+++ b/fs/xfs/xfs_utils.c
@@ -339,10 +339,10 @@
 	ip->i_d.di_onlink = 0;
 	memset(&(ip->i_d.di_pad[0]), 0, sizeof(ip->i_d.di_pad));
 	mp = tp->t_mountp;
-	if (!XFS_SB_VERSION_HASNLINK(&mp->m_sb)) {
+	if (!xfs_sb_version_hasnlink(&mp->m_sb)) {
 		spin_lock(&mp->m_sb_lock);
-		if (!XFS_SB_VERSION_HASNLINK(&mp->m_sb)) {
-			XFS_SB_VERSION_ADDNLINK(&mp->m_sb);
+		if (!xfs_sb_version_hasnlink(&mp->m_sb)) {
+			xfs_sb_version_addnlink(&mp->m_sb);
 			spin_unlock(&mp->m_sb_lock);
 			xfs_mod_sb(tp, XFS_SB_VERSIONNUM);
 		} else {
diff --git a/fs/xfs/xfs_vfsops.c b/fs/xfs/xfs_vfsops.c
index 7321304..7094caf 100644
--- a/fs/xfs/xfs_vfsops.c
+++ b/fs/xfs/xfs_vfsops.c
@@ -330,7 +330,7 @@
 	int			ronly = (mp->m_flags & XFS_MOUNT_RDONLY);
 
 	/* Fail a mount where the logbuf is smaller then the log stripe */
-	if (XFS_SB_VERSION_HASLOGV2(&mp->m_sb)) {
+	if (xfs_sb_version_haslogv2(&mp->m_sb)) {
 		if ((ap->logbufsize <= 0) &&
 		    (mp->m_sb.sb_logsunit > XLOG_BIG_RECORD_BSIZE)) {
 			mp->m_logbsize = mp->m_sb.sb_logsunit;
@@ -349,9 +349,8 @@
 		}
 	}
 
-	if (XFS_SB_VERSION_HASATTR2(&mp->m_sb)) {
+	if (xfs_sb_version_hasattr2(&mp->m_sb))
 		mp->m_flags |= XFS_MOUNT_ATTR2;
-	}
 
 	/*
 	 * prohibit r/w mounts of read-only filesystems
@@ -366,7 +365,7 @@
 	 * check for shared mount.
 	 */
 	if (ap->flags & XFSMNT_SHARED) {
-		if (!XFS_SB_VERSION_HASSHARED(&mp->m_sb))
+		if (!xfs_sb_version_hasshared(&mp->m_sb))
 			return XFS_ERROR(EINVAL);
 
 		/*
@@ -512,7 +511,7 @@
 	if (!error && logdev && logdev != ddev) {
 		unsigned int	log_sector_size = BBSIZE;
 
-		if (XFS_SB_VERSION_HASSECTOR(&mp->m_sb))
+		if (xfs_sb_version_hassector(&mp->m_sb))
 			log_sector_size = mp->m_sb.sb_logsectsize;
 		error = xfs_setsize_buftarg(mp->m_logdev_targp,
 					    mp->m_sb.sb_blocksize,
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 5130524..64c5953 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -4132,7 +4132,7 @@
 	 * actually need to zero the extent edges.  Otherwise xfs_bunmapi
 	 * will take care of it for us.
 	 */
-	if (rt && !XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb)) {
+	if (rt && !xfs_sb_version_hasextflgbit(&mp->m_sb)) {
 		nimap = 1;
 		error = xfs_bmapi(NULL, ip, startoffset_fsb,
 			1, 0, NULL, 0, &imap, &nimap, NULL, NULL);
diff --git a/include/asm-alpha/current.h b/include/asm-alpha/current.h
index 8d88a13..094d285 100644
--- a/include/asm-alpha/current.h
+++ b/include/asm-alpha/current.h
@@ -3,7 +3,7 @@
 
 #include <linux/thread_info.h>
 
-#define get_current()	(current_thread_info()->task + 0)
+#define get_current()	(current_thread_info()->task)
 #define current		get_current()
 
 #endif /* _ALPHA_CURRENT_H */
diff --git a/include/asm-alpha/dma-mapping.h b/include/asm-alpha/dma-mapping.h
index 75a1aff..db351d1 100644
--- a/include/asm-alpha/dma-mapping.h
+++ b/include/asm-alpha/dma-mapping.h
@@ -11,7 +11,7 @@
 #define dma_unmap_single(dev, addr, size, dir)		\
 		pci_unmap_single(alpha_gendev_to_pci(dev), addr, size, dir)
 #define dma_alloc_coherent(dev, size, addr, gfp)	\
-		pci_alloc_consistent(alpha_gendev_to_pci(dev), size, addr)
+	      __pci_alloc_consistent(alpha_gendev_to_pci(dev), size, addr, gfp)
 #define dma_free_coherent(dev, size, va, addr)		\
 		pci_free_consistent(alpha_gendev_to_pci(dev), size, va, addr)
 #define dma_map_page(dev, page, off, size, dir)		\
diff --git a/include/asm-alpha/kvm.h b/include/asm-alpha/kvm.h
new file mode 100644
index 0000000..b9daec4
--- /dev/null
+++ b/include/asm-alpha/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_ALPHA_H
+#define __LINUX_KVM_ALPHA_H
+
+/* alpha does not support KVM */
+
+#endif
diff --git a/include/asm-alpha/pci.h b/include/asm-alpha/pci.h
index d5b10ef..d31fd49 100644
--- a/include/asm-alpha/pci.h
+++ b/include/asm-alpha/pci.h
@@ -76,7 +76,13 @@
    successful and sets *DMA_ADDRP to the pci side dma address as well,
    else DMA_ADDRP is undefined.  */
 
-extern void *pci_alloc_consistent(struct pci_dev *, size_t, dma_addr_t *);
+extern void *__pci_alloc_consistent(struct pci_dev *, size_t,
+				    dma_addr_t *, gfp_t);
+static inline void *
+pci_alloc_consistent(struct pci_dev *dev, size_t size, dma_addr_t *dma)
+{
+	return __pci_alloc_consistent(dev, size, dma, GFP_ATOMIC);
+}
 
 /* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
    be values that were returned from pci_alloc_consistent.  SIZE must
diff --git a/include/asm-arm/arch-omap/board-osk.h b/include/asm-arm/arch-omap/board-osk.h
index 2b1a8a4..9492609 100644
--- a/include/asm-arm/arch-omap/board-osk.h
+++ b/include/asm-arm/arch-omap/board-osk.h
@@ -32,5 +32,16 @@
 /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
 #define OMAP_OSK_ETHR_START		0x04800300
 
+/* TPS65010 has four GPIOs.  nPG and LED2 can be treated like GPIOs with
+ * alternate pin configurations for hardware-controlled blinking.
+ */
+#define OSK_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+#	define OSK_TPS_GPIO_USB_PWR_EN	(OSK_TPS_GPIO_BASE + 0)
+#	define OSK_TPS_GPIO_LED_D3	(OSK_TPS_GPIO_BASE + 1)
+#	define OSK_TPS_GPIO_LAN_RESET	(OSK_TPS_GPIO_BASE + 2)
+#	define OSK_TPS_GPIO_DSP_PWR_EN	(OSK_TPS_GPIO_BASE + 3)
+#	define OSK_TPS_GPIO_LED_D9	(OSK_TPS_GPIO_BASE + 4)
+#	define OSK_TPS_GPIO_LED_D2	(OSK_TPS_GPIO_BASE + 5)
+
 #endif /*  __ASM_ARCH_OMAP_OSK_H */
 
diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h
index fa68810..57523bd 100644
--- a/include/asm-arm/arch-omap/clock.h
+++ b/include/asm-arm/arch-omap/clock.h
@@ -14,6 +14,35 @@
 #define __ARCH_ARM_OMAP_CLOCK_H
 
 struct module;
+struct clk;
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+
+struct clksel_rate {
+	u8			div;
+	u32			val;
+	u8			flags;
+};
+
+struct clksel {
+	struct clk		 *parent;
+	const struct clksel_rate *rates;
+};
+
+struct dpll_data {
+	void __iomem		*mult_div1_reg;
+	u32			mult_mask;
+	u32			div1_mask;
+#  if defined(CONFIG_ARCH_OMAP3)
+	void __iomem		*control_reg;
+	u32			enable_mask;
+	u8			auto_recal_bit;
+	u8			recal_en_bit;
+	u8			recal_st_bit;
+#  endif
+};
+
+#endif
 
 struct clk {
 	struct list_head	node;
@@ -25,8 +54,6 @@
 	__u32			flags;
 	void __iomem		*enable_reg;
 	__u8			enable_bit;
-	__u8			rate_offset;
-	__u8			src_offset;
 	__s8			usecount;
 	void			(*recalc)(struct clk *);
 	int			(*set_rate)(struct clk *, unsigned long);
@@ -34,6 +61,16 @@
 	void			(*init)(struct clk *);
 	int			(*enable)(struct clk *);
 	void			(*disable)(struct clk *);
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	u8			fixed_div;
+	void __iomem		*clksel_reg;
+	u32			clksel_mask;
+	const struct clksel	*clksel;
+	const struct dpll_data	*dpll_data;
+#else
+	__u8			rate_offset;
+	__u8			src_offset;
+#endif
 };
 
 struct clk_functions {
@@ -54,10 +91,12 @@
 extern int clk_register(struct clk *clk);
 extern void clk_unregister(struct clk *clk);
 extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
 extern void followparent_recalc(struct clk * clk);
 extern void clk_allow_idle(struct clk *clk);
 extern void clk_deny_idle(struct clk *clk);
 extern int clk_get_usecount(struct clk *clk);
+extern void clk_enable_init_clocks(void);
 
 /* Clock flags */
 #define RATE_CKCTL		(1 << 0)	/* Main fixed ratio clocks */
@@ -71,21 +110,33 @@
 #define CLOCK_NO_IDLE_PARENT	(1 << 8)
 #define DELAYED_APP		(1 << 9)	/* Delay application of clock */
 #define CONFIG_PARTICIPANT	(1 << 10)	/* Fundamental clock */
-#define CM_MPU_SEL1		(1 << 11)	/* Domain divider/source */
-#define CM_DSP_SEL1		(1 << 12)
-#define CM_GFX_SEL1		(1 << 13)
-#define CM_MODEM_SEL1		(1 << 14)
-#define CM_CORE_SEL1		(1 << 15)	/* Sets divider for many */
-#define CM_CORE_SEL2		(1 << 16)	/* sets parent for GPT */
-#define CM_WKUP_SEL1		(1 << 17)
-#define CM_PLL_SEL1		(1 << 18)
-#define CM_PLL_SEL2		(1 << 19)
-#define CM_SYSCLKOUT_SEL1	(1 << 20)
+#define ENABLE_ON_INIT		(1 << 11)	/* Enable upon framework init */
+#define INVERT_ENABLE           (1 << 12)       /* 0 enables, 1 disables */
+/* bits 13-20 are currently free */
 #define CLOCK_IN_OMAP310	(1 << 21)
 #define CLOCK_IN_OMAP730	(1 << 22)
 #define CLOCK_IN_OMAP1510	(1 << 23)
 #define CLOCK_IN_OMAP16XX	(1 << 24)
 #define CLOCK_IN_OMAP242X	(1 << 25)
 #define CLOCK_IN_OMAP243X	(1 << 26)
+#define CLOCK_IN_OMAP343X	(1 << 27)	/* clocks common to all 343X */
+#define PARENT_CONTROLS_CLOCK	(1 << 28)
+#define CLOCK_IN_OMAP3430ES1	(1 << 29)	/* 3430ES1 clocks only */
+#define CLOCK_IN_OMAP3430ES2	(1 << 30)	/* 3430ES2 clocks only */
+
+/* Clksel_rate flags */
+#define DEFAULT_RATE		(1 << 0)
+#define RATE_IN_242X		(1 << 1)
+#define RATE_IN_243X		(1 << 2)
+#define RATE_IN_343X		(1 << 3)	/* rates common to all 343X */
+#define RATE_IN_3430ES2		(1 << 4)	/* 3430ES2 rates only */
+
+#define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
+
+
+/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */
+#define CORE_CLK_SRC_32K		0
+#define CORE_CLK_SRC_DPLL		1
+#define CORE_CLK_SRC_DPLL_X2		2
 
 #endif
diff --git a/include/asm-arm/arch-omap/control.h b/include/asm-arm/arch-omap/control.h
new file mode 100644
index 0000000..9944bb5
--- /dev/null
+++ b/include/asm-arm/arch-omap/control.h
@@ -0,0 +1,191 @@
+#ifndef __ASM_ARCH_CONTROL_H
+#define __ASM_ARCH_CONTROL_H
+
+/*
+ * include/asm-arm/arch-omap/control.h
+ *
+ * OMAP2/3 System Control Module definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+
+#include <asm/arch/io.h>
+
+#define OMAP242X_CTRL_REGADDR(reg)					\
+	(void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg)					\
+	(void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg)					\
+	(void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+
+/*
+ * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
+ * OMAP24XX and OMAP34XX.
+ */
+
+/* Control submodule offsets */
+
+#define OMAP2_CONTROL_INTERFACE		0x000
+#define OMAP2_CONTROL_PADCONFS		0x030
+#define OMAP2_CONTROL_GENERAL		0x270
+#define OMAP343X_CONTROL_MEM_WKUP	0x600
+#define OMAP343X_CONTROL_PADCONFS_WKUP	0xa00
+#define OMAP343X_CONTROL_GENERAL_WKUP	0xa60
+
+/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
+
+#define OMAP2_CONTROL_SYSCONFIG		(OMAP2_CONTROL_INTERFACE + 0x10)
+
+/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */
+#define OMAP2_CONTROL_DEVCONF0		(OMAP2_CONTROL_GENERAL + 0x0004)
+#define OMAP2_CONTROL_MSUSPENDMUX_0	(OMAP2_CONTROL_GENERAL + 0x0020)
+#define OMAP2_CONTROL_MSUSPENDMUX_1	(OMAP2_CONTROL_GENERAL + 0x0024)
+#define OMAP2_CONTROL_MSUSPENDMUX_2	(OMAP2_CONTROL_GENERAL + 0x0028)
+#define OMAP2_CONTROL_MSUSPENDMUX_3	(OMAP2_CONTROL_GENERAL + 0x002c)
+#define OMAP2_CONTROL_MSUSPENDMUX_4	(OMAP2_CONTROL_GENERAL + 0x0030)
+#define OMAP2_CONTROL_MSUSPENDMUX_5	(OMAP2_CONTROL_GENERAL + 0x0034)
+#define OMAP2_CONTROL_SEC_CTRL		(OMAP2_CONTROL_GENERAL + 0x0040)
+#define OMAP2_CONTROL_RPUB_KEY_H_0	(OMAP2_CONTROL_GENERAL + 0x0090)
+#define OMAP2_CONTROL_RPUB_KEY_H_1	(OMAP2_CONTROL_GENERAL + 0x0094)
+#define OMAP2_CONTROL_RPUB_KEY_H_2	(OMAP2_CONTROL_GENERAL + 0x0098)
+#define OMAP2_CONTROL_RPUB_KEY_H_3	(OMAP2_CONTROL_GENERAL + 0x009c)
+
+/* 242x-only CONTROL_GENERAL register offsets */
+#define OMAP242X_CONTROL_DEVCONF	OMAP2_CONTROL_DEVCONF0 /* match TRM */
+#define OMAP242X_CONTROL_OCM_RAM_PERM	(OMAP2_CONTROL_GENERAL + 0x0068)
+
+/* 243x-only CONTROL_GENERAL register offsets */
+/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */
+#define OMAP243X_CONTROL_DEVCONF1	(OMAP2_CONTROL_GENERAL + 0x0078)
+#define OMAP243X_CONTROL_CSIRXFE	(OMAP2_CONTROL_GENERAL + 0x007c)
+#define OMAP243X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
+#define OMAP243X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP243X_CONTROL_IVA2_GEMCFG	(OMAP2_CONTROL_GENERAL + 0x0198)
+
+/* 24xx-only CONTROL_GENERAL register offsets */
+#define OMAP24XX_CONTROL_DEBOBS		(OMAP2_CONTROL_GENERAL + 0x0000)
+#define OMAP24XX_CONTROL_EMU_SUPPORT	(OMAP2_CONTROL_GENERAL + 0x0008)
+#define OMAP24XX_CONTROL_SEC_TEST	(OMAP2_CONTROL_GENERAL + 0x0044)
+#define OMAP24XX_CONTROL_PSA_CTRL	(OMAP2_CONTROL_GENERAL + 0x0048)
+#define OMAP24XX_CONTROL_PSA_CMD	(OMAP2_CONTROL_GENERAL + 0x004c)
+#define OMAP24XX_CONTROL_PSA_VALUE	(OMAP2_CONTROL_GENERAL + 0x0050)
+#define OMAP24XX_CONTROL_SEC_EMU	(OMAP2_CONTROL_GENERAL + 0x0060)
+#define OMAP24XX_CONTROL_SEC_TAP	(OMAP2_CONTROL_GENERAL + 0x0064)
+#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD	(OMAP2_CONTROL_GENERAL + 0x006c)
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD	(OMAP2_CONTROL_GENERAL + 0x0070)
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD	(OMAP2_CONTROL_GENERAL + 0x0074
+#define OMAP24XX_CONTROL_SEC_STATUS		(OMAP2_CONTROL_GENERAL + 0x0080)
+#define OMAP24XX_CONTROL_SEC_ERR_STATUS		(OMAP2_CONTROL_GENERAL + 0x0084)
+#define OMAP24XX_CONTROL_STATUS			(OMAP2_CONTROL_GENERAL + 0x0088)
+#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS	(OMAP2_CONTROL_GENERAL + 0x008c)
+#define OMAP24XX_CONTROL_RAND_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00a0)
+#define OMAP24XX_CONTROL_RAND_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00a4)
+#define OMAP24XX_CONTROL_RAND_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00a8)
+#define OMAP24XX_CONTROL_RAND_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00ac)
+#define OMAP24XX_CONTROL_CUST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00b0)
+#define OMAP24XX_CONTROL_CUST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00b4)
+#define OMAP24XX_CONTROL_TEST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00c0)
+#define OMAP24XX_CONTROL_TEST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00c4)
+#define OMAP24XX_CONTROL_TEST_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00c8)
+#define OMAP24XX_CONTROL_TEST_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00cc)
+#define OMAP24XX_CONTROL_TEST_KEY_4	(OMAP2_CONTROL_GENERAL + 0x00d0)
+#define OMAP24XX_CONTROL_TEST_KEY_5	(OMAP2_CONTROL_GENERAL + 0x00d4)
+#define OMAP24XX_CONTROL_TEST_KEY_6	(OMAP2_CONTROL_GENERAL + 0x00d8)
+#define OMAP24XX_CONTROL_TEST_KEY_7	(OMAP2_CONTROL_GENERAL + 0x00dc)
+#define OMAP24XX_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e0)
+#define OMAP24XX_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00e4)
+
+/* 34xx-only CONTROL_GENERAL register offsets */
+#define OMAP343X_CONTROL_PADCONF_OFF	(OMAP2_CONTROL_GENERAL + 0x0000)
+#define OMAP343X_CONTROL_MEM_DFTRW0	(OMAP2_CONTROL_GENERAL + 0x0008)
+#define OMAP343X_CONTROL_MEM_DFTRW1	(OMAP2_CONTROL_GENERAL + 0x000c)
+#define OMAP343X_CONTROL_DEVCONF1	(OMAP2_CONTROL_GENERAL + 0x0068)
+#define OMAP343X_CONTROL_CSIRXFE		(OMAP2_CONTROL_GENERAL + 0x006c)
+#define OMAP343X_CONTROL_SEC_STATUS		(OMAP2_CONTROL_GENERAL + 0x0070)
+#define OMAP343X_CONTROL_SEC_ERR_STATUS		(OMAP2_CONTROL_GENERAL + 0x0074)
+#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG	(OMAP2_CONTROL_GENERAL + 0x0078)
+#define OMAP343X_CONTROL_STATUS			(OMAP2_CONTROL_GENERAL + 0x0080)
+#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS	(OMAP2_CONTROL_GENERAL + 0x0084)
+#define OMAP343X_CONTROL_RPUB_KEY_H_4	(OMAP2_CONTROL_GENERAL + 0x00a0)
+#define OMAP343X_CONTROL_RAND_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00a8)
+#define OMAP343X_CONTROL_RAND_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00ac)
+#define OMAP343X_CONTROL_RAND_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00b0)
+#define OMAP343X_CONTROL_RAND_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00b4)
+#define OMAP343X_CONTROL_TEST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00c8)
+#define OMAP343X_CONTROL_TEST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00cc)
+#define OMAP343X_CONTROL_TEST_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00d0)
+#define OMAP343X_CONTROL_TEST_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00d4)
+#define OMAP343X_CONTROL_TEST_KEY_4	(OMAP2_CONTROL_GENERAL + 0x00d8)
+#define OMAP343X_CONTROL_TEST_KEY_5	(OMAP2_CONTROL_GENERAL + 0x00dc)
+#define OMAP343X_CONTROL_TEST_KEY_6	(OMAP2_CONTROL_GENERAL + 0x00e0)
+#define OMAP343X_CONTROL_TEST_KEY_7	(OMAP2_CONTROL_GENERAL + 0x00e4)
+#define OMAP343X_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e8)
+#define OMAP343X_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00ec)
+#define OMAP343X_CONTROL_TEST_KEY_10	(OMAP2_CONTROL_GENERAL + 0x00f0)
+#define OMAP343X_CONTROL_TEST_KEY_11	(OMAP2_CONTROL_GENERAL + 0x00f4)
+#define OMAP343X_CONTROL_TEST_KEY_12	(OMAP2_CONTROL_GENERAL + 0x00f8)
+#define OMAP343X_CONTROL_TEST_KEY_13	(OMAP2_CONTROL_GENERAL + 0x00fc)
+#define OMAP343X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
+#define OMAP343X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
+
+/*
+ * REVISIT: This list of registers is not comprehensive - there are more
+ * that should be added.
+ */
+
+/*
+ * Control module register bit defines - these should eventually go into
+ * their own regbits file.  Some of these will be complicated, depending
+ * on the device type (general-purpose, emulator, test, secure, bad, other)
+ * and the security mode (secure, non-secure, don't care)
+ */
+/* CONTROL_DEVCONF0 bits */
+#define OMAP24XX_USBSTANDBYCTRL		(1 << 15)
+#define OMAP2_MCBSP2_CLKS_MASK		(1 << 6)
+#define OMAP2_MCBSP1_CLKS_MASK		(1 << 2)
+
+/* CONTROL_DEVCONF1 bits */
+#define OMAP2_MCBSP5_CLKS_MASK		(1 << 4) /* > 242x */
+#define OMAP2_MCBSP4_CLKS_MASK		(1 << 2) /* > 242x */
+#define OMAP2_MCBSP3_CLKS_MASK		(1 << 0) /* > 242x */
+
+/* CONTROL_STATUS bits */
+#define OMAP2_DEVICETYPE_MASK		(0x7 << 8)
+#define OMAP2_SYSBOOT_5_MASK		(1 << 5)
+#define OMAP2_SYSBOOT_4_MASK		(1 << 4)
+#define OMAP2_SYSBOOT_3_MASK		(1 << 3)
+#define OMAP2_SYSBOOT_2_MASK		(1 << 2)
+#define OMAP2_SYSBOOT_1_MASK		(1 << 1)
+#define OMAP2_SYSBOOT_0_MASK		(1 << 0)
+
+#ifndef __ASSEMBLY__
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+extern void omap_ctrl_base_set(u32 base);
+extern u32 omap_ctrl_base_get(void);
+extern u8 omap_ctrl_readb(u16 offset);
+extern u16 omap_ctrl_readw(u16 offset);
+extern u32 omap_ctrl_readl(u16 offset);
+extern void omap_ctrl_writeb(u8 val, u16 offset);
+extern void omap_ctrl_writew(u16 val, u16 offset);
+extern void omap_ctrl_writel(u32 val, u16 offset);
+#else
+#define omap_ctrl_base_set(x)		WARN_ON(1)
+#define omap_ctrl_base_get()		0
+#define omap_ctrl_readb(x)		0
+#define omap_ctrl_readw(x)		0
+#define omap_ctrl_readl(x)		0
+#define omap_ctrl_writeb(x, y)		WARN_ON(1)
+#define omap_ctrl_writew(x, y)		WARN_ON(1)
+#define omap_ctrl_writel(x, y)		WARN_ON(1)
+#endif
+#endif	/* __ASSEMBLY__ */
+
+#endif /* __ASM_ARCH_CONTROL_H */
+
diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S
index f6967c8..74cd572 100644
--- a/include/asm-arm/arch-omap/entry-macro.S
+++ b/include/asm-arm/arch-omap/entry-macro.S
@@ -68,7 +68,7 @@
 		.endm
 
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =VA_IC_BASE
+		ldr	\base, =OMAP2_VA_IC_BASE
 		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
 		cmp	\irqnr, #0x0
 		bne	2222f
diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h
index 164da09..86621a0 100644
--- a/include/asm-arm/arch-omap/gpio.h
+++ b/include/asm-arm/arch-omap/gpio.h
@@ -82,62 +82,35 @@
 
 /*-------------------------------------------------------------------------*/
 
-/* wrappers for "new style" GPIO calls. the old OMAP-specfic ones should
- * eventually be removed (along with this errno.h inclusion), and maybe
- * gpios should put MPUIOs last too.
+/* Wrappers for "new style" GPIO calls, using the new infrastructure
+ * which lets us plug in FPGA, I2C, and other implementations.
+ * *
+ * The original OMAP-specfic calls should eventually be removed.
  */
 
-#include <asm/errno.h>
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return omap_request_gpio(gpio);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-	omap_free_gpio(gpio);
-}
-
-static inline int __gpio_set_direction(unsigned gpio, int is_input)
-{
-	if (cpu_class_is_omap2()) {
-		if (gpio > OMAP_MAX_GPIO_LINES)
-			return -EINVAL;
-	} else {
-		if (gpio > (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */))
-			return -EINVAL;
-	}
-	omap_set_gpio_direction(gpio, is_input);
-	return 0;
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
-	return __gpio_set_direction(gpio, 1);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-	omap_set_gpio_dataout(gpio, value);
-	return __gpio_set_direction(gpio, 0);
-}
+#include <linux/errno.h>
+#include <asm-generic/gpio.h>
 
 static inline int gpio_get_value(unsigned gpio)
 {
-	return omap_get_gpio_datain(gpio);
+	return __gpio_get_value(gpio);
 }
 
 static inline void gpio_set_value(unsigned gpio, int value)
 {
-	omap_set_gpio_dataout(gpio, value);
+	__gpio_set_value(gpio, value);
 }
 
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
+static inline int gpio_cansleep(unsigned gpio)
+{
+	return __gpio_cansleep(gpio);
+}
 
 static inline int gpio_to_irq(unsigned gpio)
 {
-	return OMAP_GPIO_IRQ(gpio);
+	if (gpio < (OMAP_MAX_GPIO_LINES + 16))
+		return OMAP_GPIO_IRQ(gpio);
+	return -EINVAL;
 }
 
 static inline int irq_to_gpio(unsigned irq)
diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h
index 289082d..160578e 100644
--- a/include/asm-arm/arch-omap/io.h
+++ b/include/asm-arm/arch-omap/io.h
@@ -80,6 +80,13 @@
 #define OMAP243X_GPMC_PHYS	OMAP243X_GPMC_BASE	/* 0x49000000 */
 #define OMAP243X_GPMC_VIRT	0xFE000000
 #define OMAP243X_GPMC_SIZE	SZ_1M
+#define OMAP243X_SDRC_PHYS	OMAP243X_SDRC_BASE
+#define OMAP243X_SDRC_VIRT	0xFD000000
+#define OMAP243X_SDRC_SIZE	SZ_1M
+#define OMAP243X_SMS_PHYS	OMAP243X_SMS_BASE
+#define OMAP243X_SMS_VIRT	0xFC000000
+#define OMAP243X_SMS_SIZE	SZ_1M
+
 #endif
 
 #define IO_OFFSET	0x90000000
@@ -88,16 +95,73 @@
 #define io_v2p(va)	((va) - IO_OFFSET)	/* Works for L3 and L4 */
 
 /* DSP */
-#define DSP_MEM_24XX_PHYS	OMAP24XX_DSP_MEM_BASE	/* 0x58000000 */
+#define DSP_MEM_24XX_PHYS	OMAP2420_DSP_MEM_BASE	/* 0x58000000 */
 #define DSP_MEM_24XX_VIRT	0xe0000000
 #define DSP_MEM_24XX_SIZE	0x28000
-#define DSP_IPI_24XX_PHYS	OMAP24XX_DSP_IPI_BASE	/* 0x59000000 */
+#define DSP_IPI_24XX_PHYS	OMAP2420_DSP_IPI_BASE	/* 0x59000000 */
 #define DSP_IPI_24XX_VIRT	0xe1000000
 #define DSP_IPI_24XX_SIZE	SZ_4K
-#define DSP_MMU_24XX_PHYS	OMAP24XX_DSP_MMU_BASE	/* 0x5a000000 */
+#define DSP_MMU_24XX_PHYS	OMAP2420_DSP_MMU_BASE	/* 0x5a000000 */
 #define DSP_MMU_24XX_VIRT	0xe2000000
 #define DSP_MMU_24XX_SIZE	SZ_4K
 
+#elif defined(CONFIG_ARCH_OMAP3)
+
+/* We map both L3 and L4 on OMAP3 */
+#define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 */
+#define L3_34XX_VIRT		0xf8000000
+#define L3_34XX_SIZE		SZ_1M   /* 44kB of 128MB used, want 1MB sect */
+
+#define L4_34XX_PHYS		L4_34XX_BASE	/* 0x48000000 */
+#define L4_34XX_VIRT		0xd8000000
+#define L4_34XX_SIZE		SZ_4M   /* 1MB of 128MB used, want 1MB sect */
+
+/*
+ * Need to look at the Size 4M for L4.
+ * VPOM3430 was not working for Int controller
+ */
+
+#define L4_WK_34XX_PHYS		L4_WK_34XX_BASE /* 0x48300000 */
+#define L4_WK_34XX_VIRT		0xd8300000
+#define L4_WK_34XX_SIZE		SZ_1M
+
+#define L4_PER_34XX_PHYS	L4_PER_34XX_BASE /* 0x49000000 */
+#define L4_PER_34XX_VIRT	0xd9000000
+#define L4_PER_34XX_SIZE	SZ_1M
+
+#define L4_EMU_34XX_PHYS	L4_EMU_34XX_BASE /* 0x54000000 */
+#define L4_EMU_34XX_VIRT	0xe4000000
+#define L4_EMU_34XX_SIZE	SZ_64M
+
+#define OMAP34XX_GPMC_PHYS	OMAP34XX_GPMC_BASE /* 0x6E000000 */
+#define OMAP34XX_GPMC_VIRT	0xFE000000
+#define OMAP34XX_GPMC_SIZE	SZ_1M
+
+#define OMAP343X_SMS_PHYS	OMAP343X_SMS_BASE /* 0x6C000000 */
+#define OMAP343X_SMS_VIRT	0xFC000000
+#define OMAP343X_SMS_SIZE	SZ_1M
+
+#define OMAP343X_SDRC_PHYS	OMAP343X_SDRC_BASE /* 0x6D000000 */
+#define OMAP343X_SDRC_VIRT	0xFD000000
+#define OMAP343X_SDRC_SIZE	SZ_1M
+
+
+#define IO_OFFSET		0x90000000
+#define IO_ADDRESS(pa)		((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_p2v(pa)		((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_v2p(va)		((va) - IO_OFFSET)/* Works for L3 and L4 */
+
+/* DSP */
+#define DSP_MEM_34XX_PHYS	OMAP34XX_DSP_MEM_BASE	/* 0x58000000 */
+#define DSP_MEM_34XX_VIRT	0xe0000000
+#define DSP_MEM_34XX_SIZE	0x28000
+#define DSP_IPI_34XX_PHYS	OMAP34XX_DSP_IPI_BASE	/* 0x59000000 */
+#define DSP_IPI_34XX_VIRT	0xe1000000
+#define DSP_IPI_34XX_SIZE	SZ_4K
+#define DSP_MMU_34XX_PHYS	OMAP34XX_DSP_MMU_BASE	/* 0x5a000000 */
+#define DSP_MMU_34XX_VIRT	0xe2000000
+#define DSP_MMU_34XX_SIZE	SZ_4K
+
 #endif
 
 #ifndef __ASSEMBLER__
diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h
index b8fff50..ff9a5b5 100644
--- a/include/asm-arm/arch-omap/mux.h
+++ b/include/asm-arm/arch-omap/mux.h
@@ -4,9 +4,10 @@
  * Table of the Omap register configurations for the FUNC_MUX and
  * PULL_DWN combinations.
  *
- * Copyright (C) 2003 - 2005 Nokia Corporation
+ * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2003 - 2008 Nokia Corporation
  *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ * Written by Tony Lindgren
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -27,14 +28,6 @@
  *	 - W8	     = ball
  *	 - 1610	     = 1510 or 1610, none if common for both 1510 and 1610
  *	 - MMC2_DAT0 = function
- *
- * Change log:
- *   Added entry for the I2C interface. (02Feb 2004)
- *   Copyright (C) 2004 Texas Instruments
- *
- *   Added entry for the keypad and uwire CS1. (09Mar 2004)
- *   Copyright (C) 2004 Texas Instruments
- *
  */
 
 #ifndef __ASM_ARCH_MUX_H
@@ -469,7 +462,12 @@
 	AA8_242X_GPIO58,
 	Y20_24XX_GPIO60,
 	W4__24XX_GPIO74,
+	N15_24XX_GPIO85,
 	M15_24XX_GPIO92,
+	P20_24XX_GPIO93,
+	P18_24XX_GPIO95,
+	M18_24XX_GPIO96,
+	L14_24XX_GPIO97,
 	J15_24XX_GPIO99,
 	V14_24XX_GPIO117,
 	P14_24XX_GPIO125,
@@ -494,8 +492,6 @@
 	D3_242X_DMAREQ4,
 	E3_242X_DMAREQ5,
 
-	P20_24XX_TSC_IRQ,
-
 	/* UART3 */
 	K15_24XX_UART3_TX,
 	K14_24XX_UART3_RX,
@@ -557,13 +553,57 @@
 	B3__24XX_KBR5,
 	AA4_24XX_KBC2,
 	B13_24XX_KBC6,
+
+	/* 2430 USB */
+	AD9_2430_USB0_PUEN,
+	Y11_2430_USB0_VP,
+	AD7_2430_USB0_VM,
+	AE7_2430_USB0_RCV,
+	AD4_2430_USB0_TXEN,
+	AF9_2430_USB0_SE0,
+	AE6_2430_USB0_DAT,
+	AD24_2430_USB1_SE0,
+	AB24_2430_USB1_RCV,
+	Y25_2430_USB1_TXEN,
+	AA26_2430_USB1_DAT,
+
+	/* 2430 HS-USB */
+	AD9_2430_USB0HS_DATA3,
+	Y11_2430_USB0HS_DATA4,
+	AD7_2430_USB0HS_DATA5,
+	AE7_2430_USB0HS_DATA6,
+	AD4_2430_USB0HS_DATA2,
+	AF9_2430_USB0HS_DATA0,
+	AE6_2430_USB0HS_DATA1,
+	AE8_2430_USB0HS_CLK,
+	AD8_2430_USB0HS_DIR,
+	AE5_2430_USB0HS_STP,
+	AE9_2430_USB0HS_NXT,
+	AC7_2430_USB0HS_DATA7,
+
+	/* 2430 McBSP */
+	AC10_2430_MCBSP2_FSX,
+	AD16_2430_MCBSP2_CLX,
+	AE13_2430_MCBSP2_DX,
+	AD13_2430_MCBSP2_DR,
+	AC10_2430_MCBSP2_FSX_OFF,
+	AD16_2430_MCBSP2_CLX_OFF,
+	AE13_2430_MCBSP2_DX_OFF,
+	AD13_2430_MCBSP2_DR_OFF,
+
+};
+
+struct omap_mux_cfg {
+	struct pin_config	*pins;
+	unsigned long		size;
+	int			(*cfg_reg)(const struct pin_config *cfg);
 };
 
 #ifdef	CONFIG_OMAP_MUX
 /* setup pin muxing in Linux */
 extern int omap1_mux_init(void);
 extern int omap2_mux_init(void);
-extern int omap_mux_register(struct pin_config * pins, unsigned long size);
+extern int omap_mux_register(struct omap_mux_cfg *);
 extern int omap_cfg_reg(unsigned long reg_cfg);
 #else
 /* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
diff --git a/include/asm-arm/arch-omap/omap24xx.h b/include/asm-arm/arch-omap/omap24xx.h
index 14c0f94..b9fcaae 100644
--- a/include/asm-arm/arch-omap/omap24xx.h
+++ b/include/asm-arm/arch-omap/omap24xx.h
@@ -1,3 +1,28 @@
+/*
+ * include/asm-arm/arch-omap/omap24xx.h
+ *
+ * This file contains the processor specific definitions
+ * of the TI OMAP24XX.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
 #ifndef __ASM_ARCH_OMAP24XX_H
 #define __ASM_ARCH_OMAP24XX_H
 
@@ -13,33 +38,70 @@
 
 /* interrupt controller */
 #define OMAP24XX_IC_BASE	(L4_24XX_BASE + 0xfe000)
-#define VA_IC_BASE		IO_ADDRESS(OMAP24XX_IC_BASE)
 #define OMAP24XX_IVA_INTC_BASE	0x40000000
 #define IRQ_SIR_IRQ		0x0040
 
-#ifdef CONFIG_ARCH_OMAP2420
-#define OMAP24XX_32KSYNCT_BASE	(L4_24XX_BASE + 0x4000)
-#define OMAP24XX_PRCM_BASE	(L4_24XX_BASE + 0x8000)
-#define OMAP24XX_SDRC_BASE	(L3_24XX_BASE + 0x9000)
-#define OMAP242X_CONTROL_STATUS	(L4_24XX_BASE + 0x2f8)
-#endif
+#define OMAP2420_CTRL_BASE	L4_24XX_BASE
+#define OMAP2420_32KSYNCT_BASE	(L4_24XX_BASE + 0x4000)
+#define OMAP2420_PRCM_BASE	(L4_24XX_BASE + 0x8000)
+#define OMAP2420_CM_BASE	(L4_24XX_BASE + 0x8000)
+#define OMAP2420_PRM_BASE	OMAP2420_CM_BASE
+#define OMAP2420_SDRC_BASE	(L3_24XX_BASE + 0x9000)
+#define OMAP2420_SMS_BASE	0x68008000
 
-#ifdef CONFIG_ARCH_OMAP2430
-#define OMAP24XX_32KSYNCT_BASE	(L4_WK_243X_BASE + 0x20000)
-#define OMAP24XX_PRCM_BASE	(L4_WK_243X_BASE + 0x6000)
-#define OMAP24XX_SDRC_BASE	(0x6D000000)
-#define OMAP242X_CONTROL_STATUS	(L4_24XX_BASE + 0x2f8)
+#define OMAP2430_32KSYNCT_BASE	(L4_WK_243X_BASE + 0x20000)
+#define OMAP2430_PRCM_BASE	(L4_WK_243X_BASE + 0x6000)
+#define OMAP2430_CM_BASE	(L4_WK_243X_BASE + 0x6000)
+#define OMAP2430_PRM_BASE	OMAP2430_CM_BASE
+
+#define OMAP243X_SMS_BASE	0x6C000000
+#define OMAP243X_SDRC_BASE	0x6D000000
 #define OMAP243X_GPMC_BASE	0x6E000000
-#endif
+#define OMAP243X_SCM_BASE	(L4_WK_243X_BASE + 0x2000)
+#define OMAP243X_CTRL_BASE	OMAP243X_SCM_BASE
+#define OMAP243X_HS_BASE	(L4_24XX_BASE + 0x000ac000)
 
 /* DSP SS */
-#define OMAP24XX_DSP_BASE	0x58000000
-#define OMAP24XX_DSP_MEM_BASE	(OMAP24XX_DSP_BASE + 0x0)
-#define OMAP24XX_DSP_IPI_BASE	(OMAP24XX_DSP_BASE + 0x1000000)
-#define OMAP24XX_DSP_MMU_BASE	(OMAP24XX_DSP_BASE + 0x2000000)
+#define OMAP2420_DSP_BASE	0x58000000
+#define OMAP2420_DSP_MEM_BASE	(OMAP2420_DSP_BASE + 0x0)
+#define OMAP2420_DSP_IPI_BASE	(OMAP2420_DSP_BASE + 0x1000000)
+#define OMAP2420_DSP_MMU_BASE	(OMAP2420_DSP_BASE + 0x2000000)
+
+#define OMAP243X_DSP_BASE	0x5C000000
+#define OMAP243X_DSP_MEM_BASE	(OMAP243X_DSP_BASE + 0x0)
+#define OMAP243X_DSP_MMU_BASE	(OMAP243X_DSP_BASE + 0x1000000)
 
 /* Mailbox */
 #define OMAP24XX_MAILBOX_BASE	(L4_24XX_BASE + 0x94000)
 
+/* Camera */
+#define OMAP24XX_CAMERA_BASE	(L4_24XX_BASE + 0x52000)
+
+/* Security */
+#define OMAP24XX_SEC_BASE	(L4_24XX_BASE + 0xA0000)
+#define OMAP24XX_SEC_RNG_BASE	(OMAP24XX_SEC_BASE + 0x0000)
+#define OMAP24XX_SEC_DES_BASE	(OMAP24XX_SEC_BASE + 0x2000)
+#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000)
+#define OMAP24XX_SEC_AES_BASE	(OMAP24XX_SEC_BASE + 0x6000)
+#define OMAP24XX_SEC_PKA_BASE	(OMAP24XX_SEC_BASE + 0x8000)
+
+#if defined(CONFIG_ARCH_OMAP2420)
+
+#define OMAP2_32KSYNCT_BASE	OMAP2420_32KSYNCT_BASE
+#define OMAP2_PRCM_BASE		OMAP2420_PRCM_BASE
+#define OMAP2_CM_BASE		OMAP2420_CM_BASE
+#define OMAP2_PRM_BASE		OMAP2420_PRM_BASE
+#define OMAP2_VA_IC_BASE	IO_ADDRESS(OMAP24XX_IC_BASE)
+
+#elif defined(CONFIG_ARCH_OMAP2430)
+
+#define OMAP2_32KSYNCT_BASE	OMAP2430_32KSYNCT_BASE
+#define OMAP2_PRCM_BASE		OMAP2430_PRCM_BASE
+#define OMAP2_CM_BASE		OMAP2430_CM_BASE
+#define OMAP2_PRM_BASE		OMAP2430_PRM_BASE
+#define OMAP2_VA_IC_BASE	IO_ADDRESS(OMAP24XX_IC_BASE)
+
+#endif
+
 #endif /* __ASM_ARCH_OMAP24XX_H */
 
diff --git a/include/asm-arm/arch-omap/sdrc.h b/include/asm-arm/arch-omap/sdrc.h
new file mode 100644
index 0000000..673b396
--- /dev/null
+++ b/include/asm-arm/arch-omap/sdrc.h
@@ -0,0 +1,75 @@
+#ifndef ____ASM_ARCH_SDRC_H
+#define ____ASM_ARCH_SDRC_H
+
+/*
+ * OMAP2/3 SDRC/SMS register definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/arch/io.h>
+
+/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
+
+#define SDRC_SYSCONFIG		0x010
+#define SDRC_DLLA_CTRL		0x060
+#define SDRC_DLLA_STATUS	0x064
+#define SDRC_DLLB_CTRL		0x068
+#define SDRC_DLLB_STATUS	0x06C
+#define SDRC_POWER		0x070
+#define SDRC_MR_0		0x084
+#define SDRC_RFR_CTRL_0		0x0a4
+
+/*
+ * These values represent the number of memory clock cycles between
+ * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
+ * rows per device, and include a subtraction of a 50 cycle window in the
+ * event that the autorefresh command is delayed due to other SDRC activity.
+ * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
+ * counter reaches 0.
+ *
+ * These represent optimal values for common parts, it won't work for all.
+ * As long as you scale down, most parameters are still work, they just
+ * become sub-optimal. The RFR value goes in the opposite direction. If you
+ * don't adjust it down as your clock period increases the refresh interval
+ * will not be met. Setting all parameters for complete worst case may work,
+ * but may cut memory performance by 2x. Due to errata the DLLs need to be
+ * unlocked and their value needs run time calibration.	A dynamic call is
+ * need for that as no single right value exists acorss production samples.
+ *
+ * Only the FULL speed values are given. Current code is such that rate
+ * changes must be made at DPLLoutx2. The actual value adjustment for low
+ * frequency operation will be handled by omap_set_performance()
+ *
+ * By having the boot loader boot up in the fastest L4 speed available likely
+ * will result in something which you can switch between.
+ */
+#define SDRC_RFR_CTRL_165MHz	(0x00044c00 | 1)
+#define SDRC_RFR_CTRL_133MHz	(0x0003de00 | 1)
+#define SDRC_RFR_CTRL_100MHz	(0x0002da01 | 1)
+#define SDRC_RFR_CTRL_110MHz	(0x0002da01 | 1) /* Need to calc */
+#define SDRC_RFR_CTRL_BYPASS	(0x00005000 | 1) /* Need to calc */
+
+
+/*
+ * SMS register access
+ */
+
+
+#define OMAP242X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+
+/* SMS register offsets - read/write with sms_{read,write}_reg() */
+
+#define SMS_SYSCONFIG		0x010
+/* REVISIT: fill in other SMS registers here */
+
+#endif
diff --git a/include/asm-arm/arch-omap/usb.h b/include/asm-arm/arch-omap/usb.h
index 99ae9ea..2147d18 100644
--- a/include/asm-arm/arch-omap/usb.h
+++ b/include/asm-arm/arch-omap/usb.h
@@ -132,14 +132,11 @@
 #	define	CONF_USB_PWRDN_DP_R	(1 << 1)
 
 /* OMAP2 */
-#define	CONTROL_DEVCONF_REG		__REG32(L4_24XX_BASE + 0x0274)
 #	define	USB_UNIDIR			0x0
 #	define	USB_UNIDIR_TLL			0x1
 #	define	USB_BIDIR			0x2
 #	define	USB_BIDIR_TLL			0x3
-#	define	USBT0WRMODEI(x)		((x) << 22)
-#	define	USBT1WRMODEI(x)		((x) << 20)
-#	define	USBT2WRMODEI(x)		((x) << 18)
+#	define	USBTXWRMODEI(port, x)	((x) << (22 - (port * 2)))
 #	define	USBT2TLL5PI		(1 << 17)
 #	define	USB0PUENACTLOI		(1 << 16)
 #	define	USBSTANDBYCTRL		(1 << 15)
diff --git a/include/asm-arm/kvm.h b/include/asm-arm/kvm.h
new file mode 100644
index 0000000..cb3c08c
--- /dev/null
+++ b/include/asm-arm/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_ARM_H
+#define __LINUX_KVM_ARM_H
+
+/* arm does not support KVM */
+
+#endif
diff --git a/include/asm-avr32/byteorder.h b/include/asm-avr32/byteorder.h
index 402ff41..d77b48b 100644
--- a/include/asm-avr32/byteorder.h
+++ b/include/asm-avr32/byteorder.h
@@ -12,8 +12,14 @@
 extern unsigned short __builtin_bswap_16(unsigned short x);
 #endif
 
+/*
+ * avr32-linux-gcc versions earlier than 4.2 improperly sign-extends
+ * the result.
+ */
+#if !(__GNUC__ == 4 && __GNUC_MINOR__ < 2)
 #define __arch__swab32(x) __builtin_bswap_32(x)
 #define __arch__swab16(x) __builtin_bswap_16(x)
+#endif
 
 #if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
 # define __BYTEORDER_HAS_U64__
diff --git a/include/asm-avr32/kvm.h b/include/asm-avr32/kvm.h
new file mode 100644
index 0000000..8c57770
--- /dev/null
+++ b/include/asm-avr32/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_AVR32_H
+#define __LINUX_KVM_AVR32_H
+
+/* avr32 does not support KVM */
+
+#endif
diff --git a/include/asm-blackfin/kvm.h b/include/asm-blackfin/kvm.h
new file mode 100644
index 0000000..e3477d7
--- /dev/null
+++ b/include/asm-blackfin/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_BLACKFIN_H
+#define __LINUX_KVM_BLACKFIN_H
+
+/* blackfin does not support KVM */
+
+#endif
diff --git a/include/asm-cris/kvm.h b/include/asm-cris/kvm.h
new file mode 100644
index 0000000..c860f51
--- /dev/null
+++ b/include/asm-cris/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_CRIS_H
+#define __LINUX_KVM_CRIS_H
+
+/* cris does not support KVM */
+
+#endif
diff --git a/include/asm-frv/kvm.h b/include/asm-frv/kvm.h
new file mode 100644
index 0000000..9c8a4f0
--- /dev/null
+++ b/include/asm-frv/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_FRV_H
+#define __LINUX_KVM_FRV_H
+
+/* frv does not support KVM */
+
+#endif
diff --git a/include/asm-frv/mem-layout.h b/include/asm-frv/mem-layout.h
index 8353225..734a1d0 100644
--- a/include/asm-frv/mem-layout.h
+++ b/include/asm-frv/mem-layout.h
@@ -60,7 +60,7 @@
  */
 #define BRK_BASE			__UL(2 * 1024 * 1024 + PAGE_SIZE)
 #define STACK_TOP			__UL(2 * 1024 * 1024)
-#define STACK_TOP_MAX	STACK_TOP
+#define STACK_TOP_MAX			__UL(0xc0000000)
 
 /* userspace process size */
 #ifdef CONFIG_MMU
diff --git a/include/asm-frv/pgtable.h b/include/asm-frv/pgtable.h
index 6c0682e..4e21904 100644
--- a/include/asm-frv/pgtable.h
+++ b/include/asm-frv/pgtable.h
@@ -507,13 +507,22 @@
  */
 static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 {
+	struct mm_struct *mm;
 	unsigned long ampr;
-	pgd_t *pge = pgd_offset(current->mm, address);
-	pud_t *pue = pud_offset(pge, address);
-	pmd_t *pme = pmd_offset(pue, address);
 
-	ampr = pme->ste[0] & 0xffffff00;
-	ampr |= xAMPRx_L | xAMPRx_SS_16Kb | xAMPRx_S | xAMPRx_C | xAMPRx_V;
+	mm = current->mm;
+	if (mm) {
+		pgd_t *pge = pgd_offset(mm, address);
+		pud_t *pue = pud_offset(pge, address);
+		pmd_t *pme = pmd_offset(pue, address);
+
+		ampr = pme->ste[0] & 0xffffff00;
+		ampr |= xAMPRx_L | xAMPRx_SS_16Kb | xAMPRx_S | xAMPRx_C |
+			xAMPRx_V;
+	} else {
+		address = ULONG_MAX;
+		ampr = 0;
+	}
 
 	asm volatile("movgs %0,scr0\n"
 		     "movgs %0,scr1\n"
diff --git a/include/asm-frv/spr-regs.h b/include/asm-frv/spr-regs.h
index c2a541e..01e6af5 100644
--- a/include/asm-frv/spr-regs.h
+++ b/include/asm-frv/spr-regs.h
@@ -99,9 +99,23 @@
 #define TBR_TT_TRAP1		(0x81 << 4)
 #define TBR_TT_TRAP2		(0x82 << 4)
 #define TBR_TT_TRAP3		(0x83 << 4)
+#define TBR_TT_TRAP120		(0xf8 << 4)
+#define TBR_TT_TRAP121		(0xf9 << 4)
+#define TBR_TT_TRAP122		(0xfa << 4)
+#define TBR_TT_TRAP123		(0xfb << 4)
+#define TBR_TT_TRAP124		(0xfc << 4)
+#define TBR_TT_TRAP125		(0xfd << 4)
 #define TBR_TT_TRAP126		(0xfe << 4)
 #define TBR_TT_BREAK		(0xff << 4)
 
+#define TBR_TT_ATOMIC_CMPXCHG32	TBR_TT_TRAP120
+#define TBR_TT_ATOMIC_XCHG32	TBR_TT_TRAP121
+#define TBR_TT_ATOMIC_XOR	TBR_TT_TRAP122
+#define TBR_TT_ATOMIC_OR	TBR_TT_TRAP123
+#define TBR_TT_ATOMIC_AND	TBR_TT_TRAP124
+#define TBR_TT_ATOMIC_SUB	TBR_TT_TRAP125
+#define TBR_TT_ATOMIC_ADD	TBR_TT_TRAP126
+
 #define __get_TBR()	({ unsigned long x; asm volatile("movsg tbr,%0" : "=r"(x)); x; })
 
 /*
diff --git a/include/asm-frv/system.h b/include/asm-frv/system.h
index b400cea..30a67a9 100644
--- a/include/asm-frv/system.h
+++ b/include/asm-frv/system.h
@@ -179,14 +179,23 @@
 #define mb()			asm volatile ("membar" : : :"memory")
 #define rmb()			asm volatile ("membar" : : :"memory")
 #define wmb()			asm volatile ("membar" : : :"memory")
-#define set_mb(var, value)	do { var = value; mb(); } while (0)
+#define read_barrier_depends()	barrier()
 
-#define smp_mb()		mb()
-#define smp_rmb()		rmb()
-#define smp_wmb()		wmb()
-
-#define read_barrier_depends()		do {} while(0)
+#ifdef CONFIG_SMP
+#define smp_mb()			mb()
+#define smp_rmb()			rmb()
+#define smp_wmb()			wmb()
 #define smp_read_barrier_depends()	read_barrier_depends()
+#define set_mb(var, value) \
+	do { xchg(&var, (value)); } while (0)
+#else
+#define smp_mb()			barrier()
+#define smp_rmb()			barrier()
+#define smp_wmb()			barrier()
+#define smp_read_barrier_depends()	do {} while(0)
+#define set_mb(var, value) \
+	do { var = (value); barrier(); } while (0)
+#endif
 
 #define HARD_RESET_NOW()			\
 do {						\
@@ -234,7 +243,7 @@
 		break;								\
 										\
 	default:								\
-		__xg_orig = 0;							\
+		__xg_orig = (__typeof__(__xg_orig))0;				\
 		asm volatile("break");						\
 		break;								\
 	}									\
@@ -259,7 +268,7 @@
 					 (__force uint32_t)__xg_test,		\
 					 (__force uint32_t)__xg_new); break;	\
 	default:								\
-		__xg_orig = 0;							\
+		__xg_orig = (__typeof__(__xg_orig))0;				\
 		asm volatile("break");						\
 		break;								\
 	}									\
diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm
index fd9dcfd..92a6d91 100644
--- a/include/asm-generic/Kbuild.asm
+++ b/include/asm-generic/Kbuild.asm
@@ -1,3 +1,5 @@
+header-y  += kvm.h
+
 ifeq ($(wildcard include/asm-$(SRCARCH)/a.out.h),include/asm-$(SRCARCH)/a.out.h)
 unifdef-y += a.out.h
 endif
diff --git a/include/asm-h8300/kvm.h b/include/asm-h8300/kvm.h
new file mode 100644
index 0000000..bdbed7b
--- /dev/null
+++ b/include/asm-h8300/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_H8300_H
+#define __LINUX_KVM_H8300_H
+
+/* h8300 does not support KVM */
+
+#endif
diff --git a/include/asm-ia64/kvm.h b/include/asm-ia64/kvm.h
new file mode 100644
index 0000000..030d29b
--- /dev/null
+++ b/include/asm-ia64/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_IA64_H
+#define __LINUX_KVM_IA64_H
+
+/* ia64 does not support KVM */
+
+#endif
diff --git a/include/asm-m32r/kvm.h b/include/asm-m32r/kvm.h
new file mode 100644
index 0000000..99a40515
--- /dev/null
+++ b/include/asm-m32r/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_M32R_H
+#define __LINUX_KVM_M32R_H
+
+/* m32r does not support KVM */
+
+#endif
diff --git a/include/asm-m68k/kvm.h b/include/asm-m68k/kvm.h
new file mode 100644
index 0000000..7ed27fc
--- /dev/null
+++ b/include/asm-m68k/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_M68K_H
+#define __LINUX_KVM_M68K_H
+
+/* m68k does not support KVM */
+
+#endif
diff --git a/include/asm-m68knommu/kvm.h b/include/asm-m68knommu/kvm.h
new file mode 100644
index 0000000..b49d425
--- /dev/null
+++ b/include/asm-m68knommu/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_M68KNOMMU_H
+#define __LINUX_KVM_M68KNOMMU_H
+
+/* m68knommu does not support KVM */
+
+#endif
diff --git a/include/asm-mips/cacheflush.h b/include/asm-mips/cacheflush.h
index 01e7eadc..d5c0f2f 100644
--- a/include/asm-mips/cacheflush.h
+++ b/include/asm-mips/cacheflush.h
@@ -63,8 +63,22 @@
 }
 
 extern void (*flush_icache_range)(unsigned long start, unsigned long end);
-#define flush_cache_vmap(start, end)		flush_cache_all()
-#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+extern void (*__flush_cache_vmap)(void);
+
+static inline void flush_cache_vmap(unsigned long start, unsigned long end)
+{
+	if (cpu_has_dc_aliases)
+		__flush_cache_vmap();
+}
+
+extern void (*__flush_cache_vunmap)(void);
+
+static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
+{
+	if (cpu_has_dc_aliases)
+		__flush_cache_vunmap();
+}
 
 extern void copy_to_user_page(struct vm_area_struct *vma,
 	struct page *page, unsigned long vaddr, void *dst, const void *src,
diff --git a/include/asm-mips/kvm.h b/include/asm-mips/kvm.h
new file mode 100644
index 0000000..093a5b7
--- /dev/null
+++ b/include/asm-mips/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_MIPS_H
+#define __LINUX_KVM_MIPS_H
+
+/* mips does not support KVM */
+
+#endif
diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h
index cb18af9..5bb57bf2 100644
--- a/include/asm-mips/mach-au1x00/au1000.h
+++ b/include/asm-mips/mach-au1x00/au1000.h
@@ -1786,6 +1786,7 @@
 	char		*cpu_name;
 	unsigned char	cpu_od;		/* Set Config[OD] */
 	unsigned char	cpu_bclk;	/* Enable BCLK switching */
+	unsigned char	cpu_pll_wo;	/* sys_cpupll reg. write-only */
 };
 
 extern struct cpu_spec		cpu_specs[];
diff --git a/include/asm-mips/mach-pb1x00/pb1200.h b/include/asm-mips/mach-pb1x00/pb1200.h
index ed5fd73..72213e3 100644
--- a/include/asm-mips/mach-pb1x00/pb1200.h
+++ b/include/asm-mips/mach-pb1x00/pb1200.h
@@ -245,7 +245,7 @@
 	PB1200_SD1_INSERT_INT,
 	PB1200_SD1_EJECT_INT,
 
-	PB1200_INT_END			(PB1200_INT_BEGIN + 15)
+	PB1200_INT_END		= PB1200_INT_BEGIN + 15
 };
 
 /* For drivers/pcmcia/au1000_db1x00.c */
diff --git a/include/asm-mn10300/kvm.h b/include/asm-mn10300/kvm.h
new file mode 100644
index 0000000..f6b609f
--- /dev/null
+++ b/include/asm-mn10300/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_MN10300_H
+#define __LINUX_KVM_MN10300_H
+
+/* mn10300 does not support KVM */
+
+#endif
diff --git a/include/asm-parisc/kvm.h b/include/asm-parisc/kvm.h
new file mode 100644
index 0000000..00cc458
--- /dev/null
+++ b/include/asm-parisc/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_PARISC_H
+#define __LINUX_KVM_PARISC_H
+
+/* parisc does not support KVM */
+
+#endif
diff --git a/include/asm-powerpc/kvm.h b/include/asm-powerpc/kvm.h
new file mode 100644
index 0000000..d1b530f
--- /dev/null
+++ b/include/asm-powerpc/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_POWERPC_H
+#define __LINUX_KVM_POWERPC_H
+
+/* powerpc does not support KVM */
+
+#endif
diff --git a/include/asm-s390/kvm.h b/include/asm-s390/kvm.h
new file mode 100644
index 0000000..573f2a3
--- /dev/null
+++ b/include/asm-s390/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_S390_H
+#define __LINUX_KVM_S390_H
+
+/* s390 does not support KVM */
+
+#endif
diff --git a/include/asm-sh/floppy.h b/include/asm-sh/floppy.h
deleted file mode 100644
index 59fbfdc..0000000
--- a/include/asm-sh/floppy.h
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * Architecture specific parts of the Floppy driver
- *   include/asm-i386/floppy.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995
- */
-#ifndef __ASM_SH_FLOPPY_H
-#define __ASM_SH_FLOPPY_H
-
-#include <linux/vmalloc.h>
-
-
-/*
- * The DMA channel used by the floppy controller cannot access data at
- * addresses >= 16MB
- *
- * Went back to the 1MB limit, as some people had problems with the floppy
- * driver otherwise. It doesn't matter much for performance anyway, as most
- * floppy accesses go through the track buffer.
- */
-#define _CROSS_64KB(a,s,vdma) \
-(!vdma && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
-
-#define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1)
-
-
-#define SW fd_routine[use_virtual_dma&1]
-#define CSW fd_routine[can_use_virtual_dma & 1]
-
-
-#define fd_inb(port)			inb_p(port)
-#define fd_outb(value,port)		outb_p(value,port)
-
-#define fd_request_dma()        CSW._request_dma(FLOPPY_DMA,"floppy")
-#define fd_free_dma()           CSW._free_dma(FLOPPY_DMA)
-#define fd_enable_irq()         enable_irq(FLOPPY_IRQ)
-#define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
-#define fd_free_irq()		free_irq(FLOPPY_IRQ, NULL)
-#define fd_get_dma_residue()    SW._get_dma_residue(FLOPPY_DMA)
-#define fd_dma_mem_alloc(size)	SW._dma_mem_alloc(size)
-#define fd_dma_setup(addr, size, mode, io) SW._dma_setup(addr, size, mode, io)
-
-#define FLOPPY_CAN_FALLBACK_ON_NODMA
-
-static int virtual_dma_count;
-static int virtual_dma_residue;
-static char *virtual_dma_addr;
-static int virtual_dma_mode;
-static int doing_pdma;
-
-static void floppy_hardint(int irq, void *dev_id, struct pt_regs * regs)
-{
-	register unsigned char st;
-
-#undef TRACE_FLPY_INT
-
-#ifdef TRACE_FLPY_INT
-	static int calls=0;
-	static int bytes=0;
-	static int dma_wait=0;
-#endif
-	if(!doing_pdma) {
-		floppy_interrupt(irq, dev_id, regs);
-		return;
-	}
-
-#ifdef TRACE_FLPY_INT
-	if(!calls)
-		bytes = virtual_dma_count;
-#endif
-
-	{
-		register int lcount;
-		register char *lptr;
-
-		st = 1;
-		for(lcount=virtual_dma_count, lptr=virtual_dma_addr; 
-		    lcount; lcount--, lptr++) {
-			st=inb(virtual_dma_port+4) & 0xa0 ;
-			if(st != 0xa0) 
-				break;
-			if(virtual_dma_mode)
-				outb_p(*lptr, virtual_dma_port+5);
-			else
-				*lptr = inb_p(virtual_dma_port+5);
-		}
-		virtual_dma_count = lcount;
-		virtual_dma_addr = lptr;
-		st = inb(virtual_dma_port+4);
-	}
-
-#ifdef TRACE_FLPY_INT
-	calls++;
-#endif
-	if(st == 0x20)
-		return;
-	if(!(st & 0x20)) {
-		virtual_dma_residue += virtual_dma_count;
-		virtual_dma_count=0;
-#ifdef TRACE_FLPY_INT
-		printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n", 
-		       virtual_dma_count, virtual_dma_residue, calls, bytes,
-		       dma_wait);
-		calls = 0;
-		dma_wait=0;
-#endif
-		doing_pdma = 0;
-		floppy_interrupt(irq, dev_id, regs);
-		return;
-	}
-#ifdef TRACE_FLPY_INT
-	if(!virtual_dma_count)
-		dma_wait++;
-#endif
-}
-
-static void fd_disable_dma(void)
-{
-	if(! (can_use_virtual_dma & 1))
-		disable_dma(FLOPPY_DMA);
-	doing_pdma = 0;
-	virtual_dma_residue += virtual_dma_count;
-	virtual_dma_count=0;
-}
-
-static int vdma_request_dma(unsigned int dmanr, const char * device_id)
-{
-	return 0;
-}
-
-static void vdma_nop(unsigned int dummy)
-{
-}
-
-
-static int vdma_get_dma_residue(unsigned int dummy)
-{
-	return virtual_dma_count + virtual_dma_residue;
-}
-
-
-static int fd_request_irq(void)
-{
-	if(can_use_virtual_dma)
-		return request_irq(FLOPPY_IRQ, floppy_hardint,
-				   IRQF_DISABLED, "floppy", NULL);
-	else
-		return request_irq(FLOPPY_IRQ, floppy_interrupt,
-				   IRQF_DISABLED, "floppy", NULL);
-}
-
-static unsigned long dma_mem_alloc(unsigned long size)
-{
-	return __get_dma_pages(GFP_KERNEL,get_order(size));
-}
-
-
-static unsigned long vdma_mem_alloc(unsigned long size)
-{
-	return (unsigned long) vmalloc(size);
-
-}
-
-#define nodma_mem_alloc(size) vdma_mem_alloc(size)
-
-static void _fd_dma_mem_free(unsigned long addr, unsigned long size)
-{
-	if((unsigned int) addr >= (unsigned int) high_memory)
-		return vfree((void *)addr);
-	else
-		free_pages(addr, get_order(size));		
-}
-
-#define fd_dma_mem_free(addr, size)  _fd_dma_mem_free(addr, size) 
-
-static void _fd_chose_dma_mode(char *addr, unsigned long size)
-{
-	if(can_use_virtual_dma == 2) {
-		if((unsigned int) addr >= (unsigned int) high_memory ||
-		   virt_to_phys(addr) >= 0x10000000)
-			use_virtual_dma = 1;
-		else
-			use_virtual_dma = 0;
-	} else {
-		use_virtual_dma = can_use_virtual_dma & 1;
-	}
-}
-
-#define fd_chose_dma_mode(addr, size) _fd_chose_dma_mode(addr, size)
-
-
-static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
-	doing_pdma = 1;
-	virtual_dma_port = io;
-	virtual_dma_mode = (mode  == DMA_MODE_WRITE);
-	virtual_dma_addr = addr;
-	virtual_dma_count = size;
-	virtual_dma_residue = 0;
-	return 0;
-}
-
-static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
-#ifdef FLOPPY_SANITY_CHECK
-	if (CROSS_64KB(addr, size)) {
-		printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
-		return -1;
-	}
-#endif
-
-	__flush_purge_region(addr, size);
-
-	/* actual, physical DMA */
-	doing_pdma = 0;
-	clear_dma_ff(FLOPPY_DMA);
-	set_dma_mode(FLOPPY_DMA,mode);
-	set_dma_addr(FLOPPY_DMA,virt_to_phys(addr));
-	set_dma_count(FLOPPY_DMA,size);
-	enable_dma(FLOPPY_DMA);
-	return 0;
-}
-
-static struct fd_routine_l {
-	int (*_request_dma)(unsigned int dmanr, const char * device_id);
-	void (*_free_dma)(unsigned int dmanr);
-	int (*_get_dma_residue)(unsigned int dummy);
-	unsigned long (*_dma_mem_alloc) (unsigned long size);
-	int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
-} fd_routine[] = {
-	{
-		request_dma,
-		free_dma,
-		get_dma_residue,
-		dma_mem_alloc,
-		hard_dma_setup
-	},
-	{
-		vdma_request_dma,
-		vdma_nop,
-		vdma_get_dma_residue,
-		vdma_mem_alloc,
-		vdma_dma_setup
-	}
-};
-
-
-static int FDC1 = 0x3f0;
-static int FDC2 = -1;
-
-/*
- * Floppy types are stored in the rtc's CMOS RAM and so rtc_lock
- * is needed to prevent corrupted CMOS RAM in case "insmod floppy"
- * coincides with another rtc CMOS user.		Paul G.
- */
-#define FLOPPY0_TYPE	(4)
-#define FLOPPY1_TYPE	(0)
-
-#define N_FDC 2
-#define N_DRIVE 8
-
-#define EXTRA_FLOPPY_PARAMS
-
-#endif /* __ASM_SH_FLOPPY_H */
diff --git a/include/asm-sh/fpu.h b/include/asm-sh/fpu.h
index f842988..91462fe 100644
--- a/include/asm-sh/fpu.h
+++ b/include/asm-sh/fpu.h
@@ -1,9 +1,8 @@
 #ifndef __ASM_SH_FPU_H
 #define __ASM_SH_FPU_H
 
-#define SR_FD    0x00008000
-
 #ifndef __ASSEMBLY__
+#include <linux/preempt.h>
 #include <asm/ptrace.h>
 
 #ifdef CONFIG_SH_FPU
@@ -21,25 +20,35 @@
 
 extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs);
 #else
+
 #define release_fpu(regs)	do { } while (0)
 #define grab_fpu(regs)		do { } while (0)
-#define save_fpu(tsk, regs)	do { } while (0)
+
+static inline void save_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+	clear_tsk_thread_flag(tsk, TIF_USEDFPU);
+}
 #endif
 
 extern int do_fpu_inst(unsigned short, struct pt_regs *);
 
-#define unlazy_fpu(tsk, regs) do {			\
-	if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) {	\
-		save_fpu(tsk, regs);			\
-	}						\
-} while (0)
+static inline void unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+	preempt_disable();
+	if (test_tsk_thread_flag(tsk, TIF_USEDFPU))
+		save_fpu(tsk, regs);
+	preempt_enable();
+}
 
-#define clear_fpu(tsk, regs) do {				\
-	if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) {		\
-		clear_tsk_thread_flag(tsk, TIF_USEDFPU);	\
-		release_fpu(regs);				\
-	}							\
-} while (0)
+static inline void clear_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+	preempt_disable();
+	if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) {
+		clear_tsk_thread_flag(tsk, TIF_USEDFPU);
+		release_fpu(regs);
+	}
+	preempt_enable();
+}
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/include/asm-sh/kvm.h b/include/asm-sh/kvm.h
new file mode 100644
index 0000000..6af51db
--- /dev/null
+++ b/include/asm-sh/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_SH_H
+#define __LINUX_KVM_SH_H
+
+/* sh does not support KVM */
+
+#endif
diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h
index 19fe47c..ec707b9 100644
--- a/include/asm-sh/processor.h
+++ b/include/asm-sh/processor.h
@@ -2,7 +2,6 @@
 #define __ASM_SH_PROCESSOR_H
 
 #include <asm/cpu-features.h>
-#include <asm/fpu.h>
 
 #ifndef __ASSEMBLY__
 /*
diff --git a/include/asm-sh/processor_32.h b/include/asm-sh/processor_32.h
index df2d5b0..c09305d 100644
--- a/include/asm-sh/processor_32.h
+++ b/include/asm-sh/processor_32.h
@@ -70,6 +70,7 @@
  */
 #define SR_DSP		0x00001000
 #define SR_IMASK	0x000000f0
+#define SR_FD		0x00008000
 
 /*
  * FPU structure and data
diff --git a/include/asm-sh/processor_64.h b/include/asm-sh/processor_64.h
index eda4bef..88a2edf8 100644
--- a/include/asm-sh/processor_64.h
+++ b/include/asm-sh/processor_64.h
@@ -112,6 +112,7 @@
 #endif
 
 #define SR_IMASK 0x000000f0
+#define SR_FD    0x00008000
 #define SR_SSTEP 0x08000000
 
 #ifndef __ASSEMBLY__
diff --git a/include/asm-sparc/kvm.h b/include/asm-sparc/kvm.h
new file mode 100644
index 0000000..2e5478da
--- /dev/null
+++ b/include/asm-sparc/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_SPARC_H
+#define __LINUX_KVM_SPARC_H
+
+/* sparc does not support KVM */
+
+#endif
diff --git a/include/asm-sparc64/cpudata.h b/include/asm-sparc64/cpudata.h
index 5424214..532975e 100644
--- a/include/asm-sparc64/cpudata.h
+++ b/include/asm-sparc64/cpudata.h
@@ -86,6 +86,8 @@
 extern void init_cur_cpu_trap(struct thread_info *);
 extern void setup_tba(void);
 extern int ncpus_probed;
+extern void __init cpu_probe(void);
+extern const struct seq_operations cpuinfo_op;
 
 extern unsigned long real_hard_smp_processor_id(void);
 
diff --git a/include/asm-sparc64/dcu.h b/include/asm-sparc64/dcu.h
index ecbed2a..0f704e10 100644
--- a/include/asm-sparc64/dcu.h
+++ b/include/asm-sparc64/dcu.h
@@ -1,26 +1,27 @@
-/* $Id: dcu.h,v 1.2 2001/03/01 23:23:33 davem Exp $ */
 #ifndef _SPARC64_DCU_H
 #define _SPARC64_DCU_H
 
+#include <linux/const.h>
+
 /* UltraSparc-III Data Cache Unit Control Register */
-#define DCU_CP		0x0002000000000000 /* Physical Cache Enable w/o mmu*/
-#define DCU_CV		0x0001000000000000 /* Virtual Cache Enable	w/o mmu	*/
-#define DCU_ME		0x0000800000000000 /* NC-store Merging Enable	*/
-#define DCU_RE		0x0000400000000000 /* RAW bypass Enable		*/
-#define DCU_PE		0x0000200000000000 /* PCache Enable		*/
-#define DCU_HPE		0x0000100000000000 /* HW prefetch Enable		*/
-#define DCU_SPE		0x0000080000000000 /* SW prefetch Enable		*/
-#define DCU_SL		0x0000040000000000 /* Secondary load steering Enab	*/
-#define DCU_WE		0x0000020000000000 /* WCache enable		*/
-#define DCU_PM		0x000001fe00000000 /* PA Watchpoint Byte Mask	*/
-#define DCU_VM		0x00000001fe000000 /* VA Watchpoint Byte Mask	*/
-#define DCU_PR		0x0000000001000000 /* PA Watchpoint Read Enable	*/
-#define DCU_PW		0x0000000000800000 /* PA Watchpoint Write Enable	*/
-#define DCU_VR		0x0000000000400000 /* VA Watchpoint Read Enable	*/
-#define DCU_VW		0x0000000000200000 /* VA Watchpoint Write Enable	*/
-#define DCU_DM		0x0000000000000008 /* DMMU Enable			*/
-#define DCU_IM		0x0000000000000004 /* IMMU Enable			*/
-#define DCU_DC		0x0000000000000002 /* Data Cache Enable		*/
-#define DCU_IC		0x0000000000000001 /* Instruction Cache Enable	*/
+#define DCU_CP	_AC(0x0002000000000000,UL) /* Phys Cache Enable w/o mmu	*/
+#define DCU_CV	_AC(0x0001000000000000,UL) /* Virt Cache Enable w/o mmu	*/
+#define DCU_ME	_AC(0x0000800000000000,UL) /* NC-store Merging Enable	*/
+#define DCU_RE	_AC(0x0000400000000000,UL) /* RAW bypass Enable		*/
+#define DCU_PE	_AC(0x0000200000000000,UL) /* PCache Enable		*/
+#define DCU_HPE	_AC(0x0000100000000000,UL) /* HW prefetch Enable	*/
+#define DCU_SPE	_AC(0x0000080000000000,UL) /* SW prefetch Enable	*/
+#define DCU_SL	_AC(0x0000040000000000,UL) /* Secondary ld-steering Enab*/
+#define DCU_WE	_AC(0x0000020000000000,UL) /* WCache enable		*/
+#define DCU_PM	_AC(0x000001fe00000000,UL) /* PA Watchpoint Byte Mask	*/
+#define DCU_VM	_AC(0x00000001fe000000,UL) /* VA Watchpoint Byte Mask	*/
+#define DCU_PR	_AC(0x0000000001000000,UL) /* PA Watchpoint Read Enable	*/
+#define DCU_PW	_AC(0x0000000000800000,UL) /* PA Watchpoint Write Enable*/
+#define DCU_VR	_AC(0x0000000000400000,UL) /* VA Watchpoint Read Enable	*/
+#define DCU_VW	_AC(0x0000000000200000,UL) /* VA Watchpoint Write Enable*/
+#define DCU_DM	_AC(0x0000000000000008,UL) /* DMMU Enable		*/
+#define DCU_IM	_AC(0x0000000000000004,UL) /* IMMU Enable		*/
+#define DCU_DC	_AC(0x0000000000000002,UL) /* Data Cache Enable		*/
+#define DCU_IC	_AC(0x0000000000000001,UL) /* Instruction Cache Enable	*/
 
 #endif /* _SPARC64_DCU_H */
diff --git a/include/asm-sparc64/irq.h b/include/asm-sparc64/irq.h
index 30cb76b..0bb9bf5 100644
--- a/include/asm-sparc64/irq.h
+++ b/include/asm-sparc64/irq.h
@@ -64,6 +64,7 @@
 extern void virt_irq_free(unsigned int virt_irq);
 #endif
 
+extern void __init init_IRQ(void);
 extern void fixup_irqs(void);
 
 static inline void set_softint(unsigned long bits)
diff --git a/include/asm-sparc64/kvm.h b/include/asm-sparc64/kvm.h
new file mode 100644
index 0000000..380537a
--- /dev/null
+++ b/include/asm-sparc64/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_SPARC64_H
+#define __LINUX_KVM_SPARC64_H
+
+/* sparc64 does not support KVM */
+
+#endif
diff --git a/include/asm-sparc64/pgtable.h b/include/asm-sparc64/pgtable.h
index 3167ccf..549e452 100644
--- a/include/asm-sparc64/pgtable.h
+++ b/include/asm-sparc64/pgtable.h
@@ -23,9 +23,9 @@
 #include <asm/page.h>
 #include <asm/processor.h>
 
-/* The kernel image occupies 0x4000000 to 0x1000000 (4MB --> 32MB).
- * The page copy blockops can use 0x2000000 to 0x4000000.
- * The TSB is mapped in the 0x4000000 to 0x6000000 range.
+/* The kernel image occupies 0x4000000 to 0x6000000 (4MB --> 96MB).
+ * The page copy blockops can use 0x6000000 to 0x8000000.
+ * The TSB is mapped in the 0x8000000 to 0xa000000 range.
  * The PROM resides in an area spanning 0xf0000000 to 0x100000000.
  * The vmalloc area spans 0x100000000 to 0x200000000.
  * Since modules need to be in the lowest 32-bits of the address space,
@@ -33,8 +33,8 @@
  * There is a single static kernel PMD which maps from 0x0 to address
  * 0x400000000.
  */
-#define	TLBTEMP_BASE		_AC(0x0000000002000000,UL)
-#define	TSBMAP_BASE		_AC(0x0000000004000000,UL)
+#define	TLBTEMP_BASE		_AC(0x0000000006000000,UL)
+#define	TSBMAP_BASE		_AC(0x0000000008000000,UL)
 #define MODULES_VADDR		_AC(0x0000000010000000,UL)
 #define MODULES_LEN		_AC(0x00000000e0000000,UL)
 #define MODULES_END		_AC(0x00000000f0000000,UL)
@@ -761,6 +761,8 @@
 extern void pgtable_cache_init(void);
 extern void sun4v_register_fault_status(void);
 extern void sun4v_ktsb_register(void);
+extern void __init cheetah_ecache_flush_init(void);
+extern void sun4v_patch_tlb_handlers(void);
 
 extern unsigned long cmdline_memory_size;
 
diff --git a/include/asm-sparc64/processor.h b/include/asm-sparc64/processor.h
index 8da484c..885b6a1 100644
--- a/include/asm-sparc64/processor.h
+++ b/include/asm-sparc64/processor.h
@@ -37,6 +37,9 @@
 #endif
 
 #define TASK_SIZE	((unsigned long)-VPTE_SIZE)
+#define TASK_SIZE_OF(tsk) \
+	(test_tsk_thread_flag(tsk,TIF_32BIT) ? \
+	 (1UL << 32UL) : TASK_SIZE)
 #ifdef __KERNEL__
 
 #define STACK_TOP32	((1UL << 32UL) - PAGE_SIZE)
diff --git a/include/asm-sparc64/stacktrace.h b/include/asm-sparc64/stacktrace.h
new file mode 100644
index 0000000..6cee39a
--- /dev/null
+++ b/include/asm-sparc64/stacktrace.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC64_STACKTRACE_H
+#define _SPARC64_STACKTRACE_H
+
+extern void stack_trace_flush(void);
+
+#endif /* _SPARC64_STACKTRACE_H */
diff --git a/include/asm-sparc64/timer.h b/include/asm-sparc64/timer.h
index ccbd694..5b779fd 100644
--- a/include/asm-sparc64/timer.h
+++ b/include/asm-sparc64/timer.h
@@ -1,14 +1,13 @@
-/* $Id: timer.h,v 1.3 2000/05/09 17:40:15 davem Exp $
- * timer.h: System timer definitions for sun5.
+/* timer.h: System timer definitions for sun5.
  *
- * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1997, 2008 David S. Miller (davem@davemloft.net)
  */
 
 #ifndef _SPARC64_TIMER_H
 #define _SPARC64_TIMER_H
 
 #include <linux/types.h>
-
+#include <linux/init.h>
 
 struct sparc64_tick_ops {
 	unsigned long (*get_tick)(void);
@@ -25,5 +24,7 @@
 extern struct sparc64_tick_ops *tick_ops;
 
 extern unsigned long sparc64_get_clock_tick(unsigned int cpu);
+extern void __devinit setup_sparc64_timer(void);
+extern void __init time_init(void);
 
 #endif /* _SPARC64_TIMER_H */
diff --git a/include/asm-um/kvm.h b/include/asm-um/kvm.h
new file mode 100644
index 0000000..66aa7709
--- /dev/null
+++ b/include/asm-um/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_UM_H
+#define __LINUX_KVM_UM_H
+
+/* um does not support KVM */
+
+#endif
diff --git a/include/asm-v850/kvm.h b/include/asm-v850/kvm.h
new file mode 100644
index 0000000..3f729b7
--- /dev/null
+++ b/include/asm-v850/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_V850_H
+#define __LINUX_KVM_V850_H
+
+/* v850 does not support KVM */
+
+#endif
diff --git a/include/asm-x86/irqflags.h b/include/asm-x86/irqflags.h
index 92021c1..0e22924 100644
--- a/include/asm-x86/irqflags.h
+++ b/include/asm-x86/irqflags.h
@@ -70,6 +70,26 @@
 	native_restore_fl(flags);
 }
 
+#ifdef CONFIG_X86_VSMP
+
+/*
+ * Interrupt control for the VSMP architecture:
+ */
+
+static inline void raw_local_irq_disable(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+	raw_local_irq_restore((flags & ~X86_EFLAGS_IF) | X86_EFLAGS_AC);
+}
+
+static inline void raw_local_irq_enable(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+	raw_local_irq_restore((flags | X86_EFLAGS_IF) & (~X86_EFLAGS_AC));
+}
+
+#else
+
 static inline void raw_local_irq_disable(void)
 {
 	native_irq_disable();
@@ -80,6 +100,8 @@
 	native_irq_enable();
 }
 
+#endif
+
 /*
  * Used in the idle loop; sti takes one instruction cycle
  * to complete:
@@ -137,10 +159,17 @@
 #define raw_local_irq_save(flags) \
 		do { (flags) = __raw_local_irq_save(); } while (0)
 
+#ifdef CONFIG_X86_VSMP
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+	return !(flags & X86_EFLAGS_IF) || (flags & X86_EFLAGS_AC);
+}
+#else
 static inline int raw_irqs_disabled_flags(unsigned long flags)
 {
 	return !(flags & X86_EFLAGS_IF);
 }
+#endif
 
 static inline int raw_irqs_disabled(void)
 {
diff --git a/include/asm-x86/lguest_hcall.h b/include/asm-x86/lguest_hcall.h
index 758b9a5..f239e70 100644
--- a/include/asm-x86/lguest_hcall.h
+++ b/include/asm-x86/lguest_hcall.h
@@ -27,7 +27,7 @@
 #ifndef __ASSEMBLY__
 #include <asm/hw_irq.h>
 
-/*G:031 First, how does our Guest contact the Host to ask for privileged
+/*G:031 But first, how does our Guest contact the Host to ask for privileged
  * operations?  There are two ways: the direct way is to make a "hypercall",
  * to make requests of the Host Itself.
  *
diff --git a/include/asm-x86/linkage.h b/include/asm-x86/linkage.h
index 31739c7d..c048353 100644
--- a/include/asm-x86/linkage.h
+++ b/include/asm-x86/linkage.h
@@ -8,12 +8,45 @@
 
 #ifdef CONFIG_X86_32
 #define asmlinkage CPP_ASMLINKAGE __attribute__((regparm(0)))
-#define prevent_tail_call(ret) __asm__ ("" : "=r" (ret) : "0" (ret))
 /*
  * For 32-bit UML - mark functions implemented in assembly that use
  * regparm input parameters:
  */
 #define asmregparm __attribute__((regparm(3)))
+
+/*
+ * Make sure the compiler doesn't do anything stupid with the
+ * arguments on the stack - they are owned by the *caller*, not
+ * the callee. This just fools gcc into not spilling into them,
+ * and keeps it from doing tailcall recursion and/or using the
+ * stack slots for temporaries, since they are live and "used"
+ * all the way to the end of the function.
+ *
+ * NOTE! On x86-64, all the arguments are in registers, so this
+ * only matters on a 32-bit kernel.
+ */
+#define asmlinkage_protect(n, ret, args...) \
+	__asmlinkage_protect##n(ret, ##args)
+#define __asmlinkage_protect_n(ret, args...) \
+	__asm__ __volatile__ ("" : "=r" (ret) : "0" (ret), ##args)
+#define __asmlinkage_protect0(ret) \
+	__asmlinkage_protect_n(ret)
+#define __asmlinkage_protect1(ret, arg1) \
+	__asmlinkage_protect_n(ret, "g" (arg1))
+#define __asmlinkage_protect2(ret, arg1, arg2) \
+	__asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2))
+#define __asmlinkage_protect3(ret, arg1, arg2, arg3) \
+	__asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3))
+#define __asmlinkage_protect4(ret, arg1, arg2, arg3, arg4) \
+	__asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \
+			      "g" (arg4))
+#define __asmlinkage_protect5(ret, arg1, arg2, arg3, arg4, arg5) \
+	__asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \
+			      "g" (arg4), "g" (arg5))
+#define __asmlinkage_protect6(ret, arg1, arg2, arg3, arg4, arg5, arg6) \
+	__asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \
+			      "g" (arg4), "g" (arg5), "g" (arg6))
+
 #endif
 
 #ifdef CONFIG_X86_ALIGNMENT_16
diff --git a/include/asm-x86/mach-rdc321x/gpio.h b/include/asm-x86/mach-rdc321x/gpio.h
index db31b92..acce0b7 100644
--- a/include/asm-x86/mach-rdc321x/gpio.h
+++ b/include/asm-x86/mach-rdc321x/gpio.h
@@ -5,19 +5,20 @@
 extern void rdc_gpio_set_value(unsigned gpio, int value);
 extern int rdc_gpio_direction_input(unsigned gpio);
 extern int rdc_gpio_direction_output(unsigned gpio, int value);
-
+extern int rdc_gpio_request(unsigned gpio, const char *label);
+extern void rdc_gpio_free(unsigned gpio);
+extern void __init rdc321x_gpio_setup(void);
 
 /* Wrappers for the arch-neutral GPIO API */
 
 static inline int gpio_request(unsigned gpio, const char *label)
 {
-	/* Not yet implemented */
-	return 0;
+	return rdc_gpio_request(gpio, label);
 }
 
 static inline void gpio_free(unsigned gpio)
 {
-	/* Not yet implemented */
+	rdc_gpio_free(gpio);
 }
 
 static inline int gpio_direction_input(unsigned gpio)
diff --git a/include/asm-x86/mach-rdc321x/rdc321x_defs.h b/include/asm-x86/mach-rdc321x/rdc321x_defs.h
index 838ba8f..c8e9c8b 100644
--- a/include/asm-x86/mach-rdc321x/rdc321x_defs.h
+++ b/include/asm-x86/mach-rdc321x/rdc321x_defs.h
@@ -3,4 +3,10 @@
 /* General purpose configuration and data registers */
 #define RDC3210_CFGREG_ADDR     0x0CF8
 #define RDC3210_CFGREG_DATA     0x0CFC
-#define RDC_MAX_GPIO		0x3A
+
+#define RDC321X_GPIO_CTRL_REG1	0x48
+#define RDC321X_GPIO_CTRL_REG2	0x84
+#define RDC321X_GPIO_DATA_REG1	0x4c
+#define RDC321X_GPIO_DATA_REG2	0x88
+
+#define RDC321X_MAX_GPIO	58
diff --git a/include/asm-x86/nops.h b/include/asm-x86/nops.h
index e3b2bce0..b3930ae 100644
--- a/include/asm-x86/nops.h
+++ b/include/asm-x86/nops.h
@@ -73,16 +73,7 @@
 #define P6_NOP7	".byte 0x0f,0x1f,0x80,0,0,0,0\n"
 #define P6_NOP8	".byte 0x0f,0x1f,0x84,0x00,0,0,0,0\n"
 
-#if defined(CONFIG_MK8)
-#define ASM_NOP1 K8_NOP1
-#define ASM_NOP2 K8_NOP2
-#define ASM_NOP3 K8_NOP3
-#define ASM_NOP4 K8_NOP4
-#define ASM_NOP5 K8_NOP5
-#define ASM_NOP6 K8_NOP6
-#define ASM_NOP7 K8_NOP7
-#define ASM_NOP8 K8_NOP8
-#elif defined(CONFIG_MK7)
+#if defined(CONFIG_MK7)
 #define ASM_NOP1 K7_NOP1
 #define ASM_NOP2 K7_NOP2
 #define ASM_NOP3 K7_NOP3
@@ -100,6 +91,15 @@
 #define ASM_NOP6 P6_NOP6
 #define ASM_NOP7 P6_NOP7
 #define ASM_NOP8 P6_NOP8
+#elif defined(CONFIG_X86_64)
+#define ASM_NOP1 K8_NOP1
+#define ASM_NOP2 K8_NOP2
+#define ASM_NOP3 K8_NOP3
+#define ASM_NOP4 K8_NOP4
+#define ASM_NOP5 K8_NOP5
+#define ASM_NOP6 K8_NOP6
+#define ASM_NOP7 K8_NOP7
+#define ASM_NOP8 K8_NOP8
 #else
 #define ASM_NOP1 GENERIC_NOP1
 #define ASM_NOP2 GENERIC_NOP2
diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h
index 174b877..9cf472a 100644
--- a/include/asm-x86/pgtable.h
+++ b/include/asm-x86/pgtable.h
@@ -85,6 +85,7 @@
 #define __PAGE_KERNEL_RX		(__PAGE_KERNEL_EXEC & ~_PAGE_RW)
 #define __PAGE_KERNEL_EXEC_NOCACHE	(__PAGE_KERNEL_EXEC | _PAGE_PCD | _PAGE_PWT)
 #define __PAGE_KERNEL_NOCACHE		(__PAGE_KERNEL | _PAGE_PCD | _PAGE_PWT)
+#define __PAGE_KERNEL_UC_MINUS		(__PAGE_KERNEL | _PAGE_PCD)
 #define __PAGE_KERNEL_VSYSCALL		(__PAGE_KERNEL_RX | _PAGE_USER)
 #define __PAGE_KERNEL_VSYSCALL_NOCACHE	(__PAGE_KERNEL_VSYSCALL | _PAGE_PCD | _PAGE_PWT)
 #define __PAGE_KERNEL_LARGE		(__PAGE_KERNEL | _PAGE_PSE)
@@ -101,6 +102,7 @@
 #define PAGE_KERNEL_EXEC		MAKE_GLOBAL(__PAGE_KERNEL_EXEC)
 #define PAGE_KERNEL_RX			MAKE_GLOBAL(__PAGE_KERNEL_RX)
 #define PAGE_KERNEL_NOCACHE		MAKE_GLOBAL(__PAGE_KERNEL_NOCACHE)
+#define PAGE_KERNEL_UC_MINUS		MAKE_GLOBAL(__PAGE_KERNEL_UC_MINUS)
 #define PAGE_KERNEL_EXEC_NOCACHE	MAKE_GLOBAL(__PAGE_KERNEL_EXEC_NOCACHE)
 #define PAGE_KERNEL_LARGE		MAKE_GLOBAL(__PAGE_KERNEL_LARGE)
 #define PAGE_KERNEL_LARGE_EXEC		MAKE_GLOBAL(__PAGE_KERNEL_LARGE_EXEC)
diff --git a/include/asm-xtensa/kvm.h b/include/asm-xtensa/kvm.h
new file mode 100644
index 0000000..bda4e33
--- /dev/null
+++ b/include/asm-xtensa/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_XTENSA_H
+#define __LINUX_KVM_XTENSA_H
+
+/* xtensa does not support KVM */
+
+#endif
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 4108b38..9cdd12a 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -195,7 +195,6 @@
 unifdef-y += eventpoll.h
 unifdef-y += signalfd.h
 unifdef-y += ext2_fs.h
-unifdef-y += ext3_fs.h
 unifdef-y += fb.h
 unifdef-y += fcntl.h
 unifdef-y += filter.h
@@ -248,14 +247,13 @@
 unifdef-y += isdnif.h
 unifdef-y += isdn_divertif.h
 unifdef-y += isdn_ppp.h
-unifdef-y += jbd.h
 unifdef-y += joystick.h
 unifdef-y += kdev_t.h
 unifdef-y += kd.h
 unifdef-y += kernelcapi.h
 unifdef-y += kernel.h
 unifdef-y += keyboard.h
-unifdef-$(CONFIG_HAVE_KVM) += kvm.h
+unifdef-y += kvm.h
 unifdef-y += llc.h
 unifdef-y += loop.h
 unifdef-y += lp.h
diff --git a/include/linux/bitops.h b/include/linux/bitops.h
index 69c1edb..40d5473 100644
--- a/include/linux/bitops.h
+++ b/include/linux/bitops.h
@@ -65,6 +65,46 @@
 	return (word >> shift) | (word << (32 - shift));
 }
 
+/**
+ * rol16 - rotate a 16-bit value left
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u16 rol16(__u16 word, unsigned int shift)
+{
+	return (word << shift) | (word >> (16 - shift));
+}
+
+/**
+ * ror16 - rotate a 16-bit value right
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u16 ror16(__u16 word, unsigned int shift)
+{
+	return (word >> shift) | (word << (16 - shift));
+}
+
+/**
+ * rol8 - rotate an 8-bit value left
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u8 rol8(__u8 word, unsigned int shift)
+{
+	return (word << shift) | (word >> (8 - shift));
+}
+
+/**
+ * ror8 - rotate an 8-bit value right
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u8 ror8(__u8 word, unsigned int shift)
+{
+	return (word >> shift) | (word << (8 - shift));
+}
+
 static inline unsigned fls_long(unsigned long l)
 {
 	if (sizeof(l) == 4)
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index 028ba3b..a6a6035 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -256,6 +256,7 @@
 	void (*bind)(struct cgroup_subsys *ss, struct cgroup *root);
 	int subsys_id;
 	int active;
+	int disabled;
 	int early_init;
 #define MAX_CGROUP_TYPE_NAMELEN 32
 	const char *name;
diff --git a/include/linux/compat.h b/include/linux/compat.h
index a671dbf..8fa7857 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -192,8 +192,8 @@
 		struct compat_timeval __user *tvp);
 
 asmlinkage long compat_sys_wait4(compat_pid_t pid,
-				 compat_uint_t *stat_addr, int options,
-				 struct compat_rusage *ru);
+				 compat_uint_t __user *stat_addr, int options,
+				 struct compat_rusage __user *ru);
 
 #define BITS_PER_COMPAT_LONG    (8*sizeof(compat_long_t))
 
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index 6b72a45..51e6b1e 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -38,8 +38,8 @@
 	unsigned int	power_usage; /* in mW */
 	unsigned int	target_residency; /* in US */
 
-	unsigned int	usage;
-	unsigned int	time; /* in US */
+	unsigned long long	usage;
+	unsigned long long	time; /* in US */
 
 	int (*enter)	(struct cpuidle_device *dev,
 			 struct cpuidle_state *state);
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 261e43a4..34d4406 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -423,7 +423,7 @@
 /* --- Helper iov-locking functions --- */
 
 struct dma_page_list {
-	char *base_address;
+	char __user *base_address;
 	int nr_pages;
 	struct page **pages;
 };
diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index 4982998..897f723 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -72,6 +72,13 @@
 #define in_softirq()		(softirq_count())
 #define in_interrupt()		(irq_count())
 
+/*
+ * Are we running in atomic context?  WARNING: this macro cannot
+ * always detect atomic context; in particular, it cannot know about
+ * held spinlocks in non-preemptible kernels.  Thus it should not be
+ * used in the general case to determine whether sleeping is possible.
+ * Do not use in_atomic() in driver code.
+ */
 #define in_atomic()		((preempt_count() & ~PREEMPT_ACTIVE) != 0)
 
 #ifdef CONFIG_PREEMPT
diff --git a/include/linux/hpet.h b/include/linux/hpet.h
index 9cd94bf..2dc29ce 100644
--- a/include/linux/hpet.h
+++ b/include/linux/hpet.h
@@ -64,7 +64,7 @@
  */
 
 #define	Tn_INT_ROUTE_CAP_MASK		(0xffffffff00000000ULL)
-#define	Tn_INT_ROUTE_CAP_SHIFT		(32UL)
+#define	Tn_INI_ROUTE_CAP_SHIFT		(32UL)
 #define	Tn_FSB_INT_DELCAP_MASK		(0x8000UL)
 #define	Tn_FSB_INT_DELCAP_SHIFT		(15)
 #define	Tn_FSB_EN_CNF_MASK		(0x4000UL)
diff --git a/include/linux/i2c/tps65010.h b/include/linux/i2c/tps65010.h
index 7021635..918c535 100644
--- a/include/linux/i2c/tps65010.h
+++ b/include/linux/i2c/tps65010.h
@@ -152,5 +152,35 @@
  */
 extern int tps65013_set_low_pwr(unsigned mode);
 
+
+struct i2c_client;
+
+/**
+ * struct tps65010_board - packages GPIO and LED lines
+ * @base: the GPIO number to assign to GPIO-1
+ * @outmask: bit (N-1) is set to allow GPIO-N to be used as an
+ *	(open drain) output
+ * @setup: optional callback issued once the GPIOs are valid
+ * @teardown: optional callback issued before the GPIOs are invalidated
+ * @context: optional parameter passed to setup() and teardown()
+ *
+ * Board data may be used to package the GPIO (and LED) lines for use
+ * in by the generic GPIO and LED frameworks.  The first four GPIOs
+ * starting at gpio_base are GPIO1..GPIO4.  The next two are LED1/nPG
+ * and LED2 (with hardware blinking capability, not currently exposed).
+ *
+ * The @setup callback may be used with the kind of board-specific glue
+ * which hands the (now-valid) GPIOs to other drivers, or which puts
+ * devices in their initial states using these GPIOs.
+ */
+struct tps65010_board {
+	int				base;
+	unsigned			outmask;
+
+	int		(*setup)(struct i2c_client *client, void *context);
+	int		(*teardown)(struct i2c_client *client, void *context);
+	void		*context;
+};
+
 #endif /*  __LINUX_I2C_TPS65010_H */
 
diff --git a/include/linux/ide.h b/include/linux/ide.h
index a3b69c1..bc26b2f 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -26,7 +26,7 @@
 #include <asm/semaphore.h>
 #include <asm/mutex.h>
 
-#if defined(CRIS) || defined(FRV)
+#if defined(CONFIG_CRIS) || defined(CONFIG_FRV)
 # define SUPPORT_VLB_SYNC 0
 #else
 # define SUPPORT_VLB_SYNC 1
diff --git a/include/linux/input.h b/include/linux/input.h
index 1bdc39a..cae2c35d 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -1227,12 +1227,13 @@
 
 static inline struct input_dev *input_get_device(struct input_dev *dev)
 {
-	return to_input_dev(get_device(&dev->dev));
+	return dev ? to_input_dev(get_device(&dev->dev)) : NULL;
 }
 
 static inline void input_put_device(struct input_dev *dev)
 {
-	put_device(&dev->dev);
+	if (dev)
+		put_device(&dev->dev);
 }
 
 static inline void *input_get_drvdata(struct input_dev *dev)
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index 1b4ccf2..cac4b36 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -2,6 +2,7 @@
 #define IOCONTEXT_H
 
 #include <linux/radix-tree.h>
+#include <linux/rcupdate.h>
 
 /*
  * This is the per-process anticipatory I/O scheduler state.
@@ -54,6 +55,8 @@
 
 	void (*dtor)(struct io_context *); /* destructor */
 	void (*exit)(struct io_context *); /* called on task exit */
+
+	struct rcu_head rcu_head;
 };
 
 /*
diff --git a/include/linux/lguest_launcher.h b/include/linux/lguest_launcher.h
index 589be3e..e7217dc 100644
--- a/include/linux/lguest_launcher.h
+++ b/include/linux/lguest_launcher.h
@@ -16,6 +16,10 @@
  * a new device, we simply need to write a new virtio driver and create support
  * for it in the Launcher: this code won't need to change.
  *
+ * Virtio devices are also used by kvm, so we can simply reuse their optimized
+ * device drivers.  And one day when everyone uses virtio, my plan will be
+ * complete.  Bwahahahah!
+ *
  * Devices are described by a simplified ID, a status byte, and some "config"
  * bytes which describe this device's configuration.  This is placed by the
  * Launcher just above the top of physical memory:
@@ -26,7 +30,7 @@
 	/* The number of virtqueues (first in config array) */
 	__u8 num_vq;
 	/* The number of bytes of feature bits.  Multiply by 2: one for host
-	 * features and one for guest acknowledgements. */
+	 * features and one for Guest acknowledgements. */
 	__u8 feature_len;
 	/* The number of bytes of the config array after virtqueues. */
 	__u8 config_len;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 269cdba..37ee881 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -295,6 +295,7 @@
 	ATA_EH_SOFTRESET	= (1 << 1),
 	ATA_EH_HARDRESET	= (1 << 2),
 	ATA_EH_ENABLE_LINK	= (1 << 3),
+	ATA_EH_LPM		= (1 << 4),  /* link power management action */
 
 	ATA_EH_RESET_MASK	= ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
 	ATA_EH_PERDEV_MASK	= ATA_EH_REVALIDATE,
@@ -304,7 +305,6 @@
 	ATA_EHI_RESUME_LINK	= (1 << 1),  /* resume link (reset modifier) */
 	ATA_EHI_NO_AUTOPSY	= (1 << 2),  /* no autopsy */
 	ATA_EHI_QUIET		= (1 << 3),  /* be quiet */
-	ATA_EHI_LPM		= (1 << 4),  /* link power management action */
 
 	ATA_EHI_DID_SOFTRESET	= (1 << 16), /* already soft-reset this port */
 	ATA_EHI_DID_HARDRESET	= (1 << 17), /* already soft-reset this port */
@@ -350,7 +350,8 @@
 	ATAPI_READ		= 0,		/* READs */
 	ATAPI_WRITE		= 1,		/* WRITEs */
 	ATAPI_READ_CD		= 2,		/* READ CD [MSF] */
-	ATAPI_MISC		= 3,		/* the rest */
+	ATAPI_PASS_THRU		= 3,		/* SAT pass-thru */
+	ATAPI_MISC		= 4,		/* the rest */
 };
 
 enum ata_xfer_mask {
@@ -849,6 +850,7 @@
  */
 extern void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf);
 extern void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
+extern int atapi_cmd_type(u8 opcode);
 extern void ata_tf_to_fis(const struct ata_taskfile *tf,
 			  u8 pmp, int is_cmd, u8 *fis);
 extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf);
@@ -1379,27 +1381,6 @@
 	       ata_id_has_flush_ext(dev->id);
 }
 
-static inline int atapi_cmd_type(u8 opcode)
-{
-	switch (opcode) {
-	case GPCMD_READ_10:
-	case GPCMD_READ_12:
-		return ATAPI_READ;
-
-	case GPCMD_WRITE_10:
-	case GPCMD_WRITE_12:
-	case GPCMD_WRITE_AND_VERIFY_10:
-		return ATAPI_WRITE;
-
-	case GPCMD_READ_CD:
-	case GPCMD_READ_CD_MSF:
-		return ATAPI_READ_CD;
-
-	default:
-		return ATAPI_MISC;
-	}
-}
-
 static inline unsigned int ac_err_mask(u8 status)
 {
 	if (status & (ATA_BUSY | ATA_DRQ))
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
index 0592936..2119610 100644
--- a/include/linux/linkage.h
+++ b/include/linux/linkage.h
@@ -17,8 +17,24 @@
 # define asmregparm
 #endif
 
-#ifndef prevent_tail_call
-# define prevent_tail_call(ret) do { } while (0)
+/*
+ * This is used by architectures to keep arguments on the stack
+ * untouched by the compiler by keeping them live until the end.
+ * The argument stack may be owned by the assembly-language
+ * caller, not the callee, and gcc doesn't always understand
+ * that.
+ *
+ * We have the return value, and a maximum of six arguments.
+ *
+ * This should always be followed by a "return ret" for the
+ * protection to work (ie no more work that the compiler might
+ * end up needing stack temporaries for).
+ */
+/* Assembly files may be compiled with -traditional .. */
+#ifndef __ASSEMBLY__
+#ifndef asmlinkage_protect
+# define asmlinkage_protect(n, ret, args...)	do { } while (0)
+#endif
 #endif
 
 #ifndef __ALIGN
diff --git a/include/linux/mount.h b/include/linux/mount.h
index 6d3047d..5ee2df2 100644
--- a/include/linux/mount.h
+++ b/include/linux/mount.h
@@ -61,6 +61,7 @@
 	atomic_t mnt_count;
 	int mnt_expiry_mark;		/* true if marked for expiry */
 	int mnt_pinned;
+	int mnt_ghosts;
 };
 
 static inline struct vfsmount *mntget(struct vfsmount *mnt)
@@ -98,7 +99,6 @@
 			int mnt_flags, struct list_head *fslist);
 
 extern void mark_mounts_for_expiry(struct list_head *mounts);
-extern void shrink_submounts(struct vfsmount *mountpoint, struct list_head *mounts);
 
 extern spinlock_t vfsmount_lock;
 extern dev_t name_to_dev_t(char *name);
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index a2f0032..ee81906 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -383,9 +383,11 @@
 
 static inline void napi_complete(struct napi_struct *n)
 {
-	local_irq_disable();
+	unsigned long flags;
+
+	local_irq_save(flags);
 	__napi_complete(n);
-	local_irq_enable();
+	local_irq_restore(flags);
 }
 
 /**
@@ -1072,12 +1074,14 @@
 }
 
 /* Use this variant when it is known for sure that it
- * is executing from interrupt context.
+ * is executing from hardware interrupt context or with hardware interrupts
+ * disabled.
  */
 extern void dev_kfree_skb_irq(struct sk_buff *skb);
 
 /* Use this variant in places where it could be invoked
- * either from interrupt or non-interrupt context.
+ * from either hardware interrupt or other context, with hardware interrupts
+ * either disabled or enabled.
  */
 extern void dev_kfree_skb_any(struct sk_buff *skb);
 
diff --git a/include/linux/pnp.h b/include/linux/pnp.h
index 29dd558..b2f05c2 100644
--- a/include/linux/pnp.h
+++ b/include/linux/pnp.h
@@ -175,7 +175,7 @@
 struct pnp_dev {
 	struct device dev;		/* Driver Model device interface */
 	u64 dma_mask;
-	unsigned char number;		/* used as an index, must be unique */
+	unsigned int number;		/* used as an index, must be unique */
 	int status;
 
 	struct list_head global_list;	/* node in global list of devices */
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index 576a5f7..1129ee0 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -341,6 +341,9 @@
  * atomic_dec_and_lock - lock on reaching reference count zero
  * @atomic: the atomic counter
  * @lock: the spinlock in question
+ *
+ * Decrements @atomic by 1.  If the result is 0, returns true and locks
+ * @lock.  Returns false for all other cases.
  */
 extern int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock);
 #define atomic_dec_and_lock(atomic, lock) \
diff --git a/include/linux/virtio.h b/include/linux/virtio.h
index 12c18ac..e7d1084 100644
--- a/include/linux/virtio.h
+++ b/include/linux/virtio.h
@@ -41,6 +41,8 @@
  *	Returns NULL or the "data" token handed to add_buf.
  * @disable_cb: disable callbacks
  *	vq: the struct virtqueue we're talking about.
+ *	Note that this is not necessarily synchronous, hence unreliable and only
+ *	useful as an optimization.
  * @enable_cb: restart callbacks after disable_cb.
  *	vq: the struct virtqueue we're talking about.
  *	This re-enables callbacks; it returns "false" if there are pending
@@ -48,7 +50,8 @@
  *	checking for more work, and enabling callbacks.
  *
  * Locking rules are straightforward: the driver is responsible for
- * locking.  No two operations may be invoked simultaneously.
+ * locking.  No two operations may be invoked simultaneously, with the exception
+ * of @disable_cb.
  *
  * All operations can be called in any context.
  */
diff --git a/include/net/llc.h b/include/net/llc.h
index f502458..7940da1 100644
--- a/include/net/llc.h
+++ b/include/net/llc.h
@@ -65,7 +65,6 @@
 
 extern struct list_head llc_sap_list;
 extern rwlock_t llc_sap_list_lock;
-extern unsigned char llc_station_mac_sa[ETH_ALEN];
 
 extern int llc_rcv(struct sk_buff *skb, struct net_device *dev,
 		   struct packet_type *pt, struct net_device *orig_dev);
diff --git a/include/net/llc_pdu.h b/include/net/llc_pdu.h
index 4a8f58b..75b8e296 100644
--- a/include/net/llc_pdu.h
+++ b/include/net/llc_pdu.h
@@ -381,7 +381,7 @@
 	xid_info->fmt_id = LLC_XID_FMT_ID;	/* 0x81 */
 	xid_info->type	 = svcs_supported;
 	xid_info->rw	 = rx_window << 1;	/* size of receive window */
-	skb_put(skb, 3);
+	skb_put(skb, sizeof(struct llc_xid_info));
 }
 
 /**
@@ -406,7 +406,7 @@
 	xid_info->fmt_id = LLC_XID_FMT_ID;
 	xid_info->type	 = svcs_supported;
 	xid_info->rw	 = rx_window << 1;
-	skb_put(skb, 3);
+	skb_put(skb, sizeof(struct llc_xid_info));
 }
 
 /* LLC Type 2 FRMR response information field format */
diff --git a/include/net/llc_sap.h b/include/net/llc_sap.h
index 2c56dbe..ed25bec 100644
--- a/include/net/llc_sap.h
+++ b/include/net/llc_sap.h
@@ -1,5 +1,8 @@
 #ifndef LLC_SAP_H
 #define LLC_SAP_H
+
+#include <asm/types.h>
+
 /*
  * Copyright (c) 1997 by Procom Technology,Inc.
  * 		 2001-2003 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
@@ -19,8 +22,8 @@
 extern void llc_sap_rtn_pdu(struct llc_sap *sap, struct sk_buff *skb);
 extern void llc_save_primitive(struct sock *sk, struct sk_buff* skb,
 			       unsigned char prim);
-extern struct sk_buff *llc_alloc_frame(struct sock *sk,
-				       struct net_device *dev);
+extern struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev,
+				       u8 type, u32 data_size);
 
 extern void llc_build_and_send_test_pkt(struct llc_sap *sap,
 				        struct sk_buff *skb,
diff --git a/include/net/neighbour.h b/include/net/neighbour.h
index ebbfb50..64a5f01 100644
--- a/include/net/neighbour.h
+++ b/include/net/neighbour.h
@@ -218,6 +218,10 @@
 extern void			pneigh_enqueue(struct neigh_table *tbl, struct neigh_parms *p,
 					       struct sk_buff *skb);
 extern struct pneigh_entry	*pneigh_lookup(struct neigh_table *tbl, struct net *net, const void *key, struct net_device *dev, int creat);
+extern struct pneigh_entry	*__pneigh_lookup(struct neigh_table *tbl,
+						 struct net *net,
+						 const void *key,
+						 struct net_device *dev);
 extern int			pneigh_delete(struct neigh_table *tbl, struct net *net, const void *key, struct net_device *dev);
 
 extern void neigh_app_ns(struct neighbour *n);
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 7de4ea3..4fd3eb2 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -752,6 +752,8 @@
 	return tp->packets_out - tcp_left_out(tp) + tp->retrans_out;
 }
 
+extern int tcp_limit_reno_sacked(struct tcp_sock *tp);
+
 /* If cwnd > ssthresh, we may raise ssthresh to be half-way to cwnd.
  * The exception is rate halving phase, when cwnd is decreasing towards
  * ssthresh.
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 619c53b..0d255ae 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -204,6 +204,7 @@
 	 * transformer. */
 	const struct xfrm_type	*type;
 	struct xfrm_mode	*inner_mode;
+	struct xfrm_mode	*inner_mode_iaf;
 	struct xfrm_mode	*outer_mode;
 
 	/* Security context */
@@ -387,6 +388,27 @@
 extern int xfrm_register_mode(struct xfrm_mode *mode, int family);
 extern int xfrm_unregister_mode(struct xfrm_mode *mode, int family);
 
+static inline int xfrm_af2proto(unsigned int family)
+{
+	switch(family) {
+	case AF_INET:
+		return IPPROTO_IPIP;
+	case AF_INET6:
+		return IPPROTO_IPV6;
+	default:
+		return 0;
+	}
+}
+
+static inline struct xfrm_mode *xfrm_ip2inner_mode(struct xfrm_state *x, int ipproto)
+{
+	if ((ipproto == IPPROTO_IPIP && x->props.family == AF_INET) ||
+	    (ipproto == IPPROTO_IPV6 && x->props.family == AF_INET6))
+		return x->inner_mode;
+	else
+		return x->inner_mode_iaf;
+}
+
 struct xfrm_tmpl
 {
 /* id in template is interpreted as:
@@ -530,6 +552,9 @@
 	__be16 id;
 	__be16 frag_off;
 
+	/* IP header length (excluding options or extension headers). */
+	u8 ihl;
+
 	/* TOS for IPv4, class for IPv6. */
 	u8 tos;
 
@@ -539,6 +564,9 @@
 	/* Protocol for IPv4, NH for IPv6. */
 	u8 protocol;
 
+	/* Option length for IPv4, zero for IPv6. */
+	u8 optlen;
+
 	/* Used by IPv6 only, zero for IPv4. */
 	u8 flow_lbl[3];
 };
@@ -1253,6 +1281,7 @@
 extern int xfrm_input_resume(struct sk_buff *skb, int nexthdr);
 extern int xfrm_output_resume(struct sk_buff *skb, int err);
 extern int xfrm_output(struct sk_buff *skb);
+extern int xfrm_inner_extract_output(struct xfrm_state *x, struct sk_buff *skb);
 extern int xfrm4_extract_header(struct sk_buff *skb);
 extern int xfrm4_extract_input(struct xfrm_state *x, struct sk_buff *skb);
 extern int xfrm4_rcv_encap(struct sk_buff *skb, int nexthdr, __be32 spi,
diff --git a/kernel/audit.c b/kernel/audit.c
index be55cb5..b782b04 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -1269,8 +1269,8 @@
 
 /**
  * audit_string_contains_control - does a string need to be logged in hex
- * @string - string to be checked
- * @len - max length of the string to check
+ * @string: string to be checked
+ * @len: max length of the string to check
  */
 int audit_string_contains_control(const char *string, size_t len)
 {
@@ -1285,7 +1285,7 @@
 /**
  * audit_log_n_untrustedstring - log a string that may contain random characters
  * @ab: audit_buffer
- * @len: lenth of string (not including trailing null)
+ * @len: length of string (not including trailing null)
  * @string: string to be logged
  *
  * This code will escape a string that is passed to it if the string
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index e9c2fb0..2727f92 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -782,7 +782,14 @@
 		if (!*token)
 			return -EINVAL;
 		if (!strcmp(token, "all")) {
-			opts->subsys_bits = (1 << CGROUP_SUBSYS_COUNT) - 1;
+			/* Add all non-disabled subsystems */
+			int i;
+			opts->subsys_bits = 0;
+			for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
+				struct cgroup_subsys *ss = subsys[i];
+				if (!ss->disabled)
+					opts->subsys_bits |= 1ul << i;
+			}
 		} else if (!strcmp(token, "noprefix")) {
 			set_bit(ROOT_NOPREFIX, &opts->flags);
 		} else if (!strncmp(token, "release_agent=", 14)) {
@@ -800,7 +807,8 @@
 			for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
 				ss = subsys[i];
 				if (!strcmp(token, ss->name)) {
-					set_bit(i, &opts->subsys_bits);
+					if (!ss->disabled)
+						set_bit(i, &opts->subsys_bits);
 					break;
 				}
 			}
@@ -2082,7 +2090,7 @@
 
 		kfree(pidarray);
 	} else {
-		ctr->buf = 0;
+		ctr->buf = NULL;
 		ctr->bufsz = 0;
 	}
 	file->private_data = ctr;
@@ -2561,6 +2569,7 @@
 		/* Skip this hierarchy if it has no active subsystems */
 		if (!root->actual_subsys_bits)
 			continue;
+		seq_printf(m, "%lu:", root->subsys_bits);
 		for_each_subsys(root, ss)
 			seq_printf(m, "%s%s", count++ ? "," : "", ss->name);
 		seq_putc(m, ':');
@@ -2600,13 +2609,13 @@
 {
 	int i;
 
-	seq_puts(m, "#subsys_name\thierarchy\tnum_cgroups\n");
+	seq_puts(m, "#subsys_name\thierarchy\tnum_cgroups\tenabled\n");
 	mutex_lock(&cgroup_mutex);
 	for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
 		struct cgroup_subsys *ss = subsys[i];
-		seq_printf(m, "%s\t%lu\t%d\n",
+		seq_printf(m, "%s\t%lu\t%d\t%d\n",
 			   ss->name, ss->root->subsys_bits,
-			   ss->root->number_of_cgroups);
+			   ss->root->number_of_cgroups, !ss->disabled);
 	}
 	mutex_unlock(&cgroup_mutex);
 	return 0;
@@ -2614,7 +2623,7 @@
 
 static int cgroupstats_open(struct inode *inode, struct file *file)
 {
-	return single_open(file, proc_cgroupstats_show, 0);
+	return single_open(file, proc_cgroupstats_show, NULL);
 }
 
 static struct file_operations proc_cgroupstats_operations = {
@@ -3010,3 +3019,27 @@
 	spin_unlock(&release_list_lock);
 	mutex_unlock(&cgroup_mutex);
 }
+
+static int __init cgroup_disable(char *str)
+{
+	int i;
+	char *token;
+
+	while ((token = strsep(&str, ",")) != NULL) {
+		if (!*token)
+			continue;
+
+		for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
+			struct cgroup_subsys *ss = subsys[i];
+
+			if (!strcmp(token, ss->name)) {
+				ss->disabled = 1;
+				printk(KERN_INFO "Disabling %s control group"
+					" subsystem\n", ss->name);
+				break;
+			}
+		}
+	}
+	return 1;
+}
+__setup("cgroup_disable=", cgroup_disable);
diff --git a/kernel/exit.c b/kernel/exit.c
index 53872bf..073005b 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -1608,7 +1608,7 @@
 	put_pid(pid);
 
 	/* avoid REGPARM breakage on x86: */
-	prevent_tail_call(ret);
+	asmlinkage_protect(5, ret, which, upid, infop, options, ru);
 	return ret;
 }
 
@@ -1640,7 +1640,7 @@
 	put_pid(pid);
 
 	/* avoid REGPARM breakage on x86: */
-	prevent_tail_call(ret);
+	asmlinkage_protect(4, ret, upid, stat_addr, options, ru);
 	return ret;
 }
 
diff --git a/kernel/fork.c b/kernel/fork.c
index dd249c3..9c042f9 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -394,7 +394,6 @@
 {
 	BUG_ON(mm == &init_mm);
 	mm_free_pgd(mm);
-	mm_free_cgroup(mm);
 	destroy_context(mm);
 	free_mm(mm);
 }
@@ -416,6 +415,7 @@
 			spin_unlock(&mmlist_lock);
 		}
 		put_swap_token(mm);
+		mm_free_cgroup(mm);
 		mmdrop(mm);
 	}
 }
diff --git a/kernel/futex.c b/kernel/futex.c
index 06968cd..e43945e 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -281,7 +281,7 @@
  */
 static void get_futex_key_refs(union futex_key *key)
 {
-	if (key->both.ptr == 0)
+	if (key->both.ptr == NULL)
 		return;
 	switch (key->both.offset & (FUT_OFF_INODE|FUT_OFF_MMSHARED)) {
 		case FUT_OFF_INODE:
@@ -2158,7 +2158,7 @@
 	.kill_sb	= kill_anon_super,
 };
 
-static int __init init(void)
+static int __init futex_init(void)
 {
 	u32 curval;
 	int i;
@@ -2194,4 +2194,4 @@
 
 	return 0;
 }
-__initcall(init);
+__initcall(futex_init);
diff --git a/kernel/futex_compat.c b/kernel/futex_compat.c
index ff90f04..04ac3a9 100644
--- a/kernel/futex_compat.c
+++ b/kernel/futex_compat.c
@@ -30,7 +30,7 @@
 	return 0;
 }
 
-static void __user *futex_uaddr(struct robust_list *entry,
+static void __user *futex_uaddr(struct robust_list __user *entry,
 				compat_long_t futex_offset)
 {
 	compat_uptr_t base = ptr_to_compat(entry);
diff --git a/kernel/marker.c b/kernel/marker.c
index 041c33e..005b959 100644
--- a/kernel/marker.c
+++ b/kernel/marker.c
@@ -671,6 +671,9 @@
 	entry->rcu_pending = 1;
 	/* write rcu_pending before calling the RCU callback */
 	smp_wmb();
+#ifdef CONFIG_PREEMPT_RCU
+	synchronize_sched();	/* Until we have the call_rcu_sched() */
+#endif
 	call_rcu(&entry->rcu, free_old_closure);
 end:
 	mutex_unlock(&markers_mutex);
@@ -714,6 +717,9 @@
 	entry->rcu_pending = 1;
 	/* write rcu_pending before calling the RCU callback */
 	smp_wmb();
+#ifdef CONFIG_PREEMPT_RCU
+	synchronize_sched();	/* Until we have the call_rcu_sched() */
+#endif
 	call_rcu(&entry->rcu, free_old_closure);
 	remove_marker(name);	/* Ignore busy error message */
 	ret = 0;
@@ -792,6 +798,9 @@
 	entry->rcu_pending = 1;
 	/* write rcu_pending before calling the RCU callback */
 	smp_wmb();
+#ifdef CONFIG_PREEMPT_RCU
+	synchronize_sched();	/* Until we have the call_rcu_sched() */
+#endif
 	call_rcu(&entry->rcu, free_old_closure);
 	remove_marker(entry->name);	/* Ignore busy error message */
 end:
diff --git a/kernel/uid16.c b/kernel/uid16.c
index dd308ba..3e41c16 100644
--- a/kernel/uid16.c
+++ b/kernel/uid16.c
@@ -21,7 +21,7 @@
 {
 	long ret = sys_chown(filename, low2highuid(user), low2highgid(group));
 	/* avoid REGPARM breakage on x86: */
-	prevent_tail_call(ret);
+	asmlinkage_protect(3, ret, filename, user, group);
 	return ret;
 }
 
@@ -29,7 +29,7 @@
 {
 	long ret = sys_lchown(filename, low2highuid(user), low2highgid(group));
 	/* avoid REGPARM breakage on x86: */
-	prevent_tail_call(ret);
+	asmlinkage_protect(3, ret, filename, user, group);
 	return ret;
 }
 
@@ -37,7 +37,7 @@
 {
 	long ret = sys_fchown(fd, low2highuid(user), low2highgid(group));
 	/* avoid REGPARM breakage on x86: */
-	prevent_tail_call(ret);
+	asmlinkage_protect(3, ret, fd, user, group);
 	return ret;
 }
 
@@ -45,7 +45,7 @@
 {
 	long ret = sys_setregid(low2highgid(rgid), low2highgid(egid));
 	/* avoid REGPARM breakage on x86: */
-	prevent_tail_call(ret);
+	asmlinkage_protect(2, ret, rgid, egid);
 	return ret;
 }
 
@@ -53,7 +53,7 @@
 {
 	long ret = sys_setgid(low2highgid(gid));
 	/* avoid REGPARM breakage on x86: */
-	prevent_tail_call(ret);
+	asmlinkage_protect(1, ret, gid);
 	return ret;
 }
 
@@ -61,7 +61,7 @@
 {
 	long ret = sys_setreuid(low2highuid(ruid), low2highuid(euid));
 	/* avoid REGPARM breakage on x86: */
-	prevent_tail_call(ret);
+	asmlinkage_protect(2, ret, ruid, euid);
 	return ret;
 }
 
@@ -69,7 +69,7 @@
 {
 	long ret = sys_setuid(low2highuid(uid));
 	/* avoid REGPARM breakage on x86: */
-	prevent_tail_call(ret);
+	asmlinkage_protect(1, ret, uid);
 	return ret;
 }
 
@@ -78,7 +78,7 @@
 	long ret = sys_setresuid(low2highuid(ruid), low2highuid(euid),
 				 low2highuid(suid));
 	/* avoid REGPARM breakage on x86: */
-	prevent_tail_call(ret);
+	asmlinkage_protect(3, ret, ruid, euid, suid);
 	return ret;
 }
 
@@ -98,7 +98,7 @@
 	long ret = sys_setresgid(low2highgid(rgid), low2highgid(egid),
 				 low2highgid(sgid));
 	/* avoid REGPARM breakage on x86: */
-	prevent_tail_call(ret);
+	asmlinkage_protect(3, ret, rgid, egid, sgid);
 	return ret;
 }
 
@@ -117,7 +117,7 @@
 {
 	long ret = sys_setfsuid(low2highuid(uid));
 	/* avoid REGPARM breakage on x86: */
-	prevent_tail_call(ret);
+	asmlinkage_protect(1, ret, uid);
 	return ret;
 }
 
@@ -125,7 +125,7 @@
 {
 	long ret = sys_setfsgid(low2highgid(gid));
 	/* avoid REGPARM breakage on x86: */
-	prevent_tail_call(ret);
+	asmlinkage_protect(1, ret, gid);
 	return ret;
 }
 
diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index 5a402e2..5b6d7f6 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -55,7 +55,7 @@
 	enum kobject_action action;
 	int ret = -EINVAL;
 
-	if (count && buf[count-1] == '\n')
+	if (count && (buf[count-1] == '\n' || buf[count-1] == '\0'))
 		count--;
 
 	if (!count)
diff --git a/lib/lzo/lzo1x_decompress.c b/lib/lzo/lzo1x_decompress.c
index 9dc7056..77f0f9b 100644
--- a/lib/lzo/lzo1x_decompress.c
+++ b/lib/lzo/lzo1x_decompress.c
@@ -158,7 +158,7 @@
 					t += 7 + *ip++;
 				}
 				m_pos -= le16_to_cpu(get_unaligned(
-					(const unsigned short *)ip) >> 2);
+					(const unsigned short *)ip)) >> 2;
 				ip += 2;
 				if (m_pos == op)
 					goto eof_found;
diff --git a/lib/random32.c b/lib/random32.c
index ec7f81d..ca87d86 100644
--- a/lib/random32.c
+++ b/lib/random32.c
@@ -97,13 +97,18 @@
  *	@seed: seed value
  *
  *	Add some additional seeding to the random32() pool.
- *	Note: this pool is per cpu so it only affects current CPU.
  */
 void srandom32(u32 entropy)
 {
-	struct rnd_state *state = &get_cpu_var(net_rand_state);
-	__set_random32(state, state->s1 ^ entropy);
-	put_cpu_var(state);
+	int i;
+	/*
+	 * No locking on the CPUs, but then somewhat random results are, well,
+	 * expected.
+	 */
+	for_each_possible_cpu (i) {
+		struct rnd_state *state = &per_cpu(net_rand_state, i);
+		__set_random32(state, state->s1 ^ entropy);
+	}
 }
 EXPORT_SYMBOL(srandom32);
 
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 74c1b6b..51c9e2c 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -401,12 +401,20 @@
 	struct page *page;
 	unsigned long nr_pages;
 
+	/*
+	 * We want to release as many surplus pages as possible, spread
+	 * evenly across all nodes. Iterate across all nodes until we
+	 * can no longer free unreserved surplus pages. This occurs when
+	 * the nodes with surplus pages have no free pages.
+	 */
+	unsigned long remaining_iterations = num_online_nodes();
+
 	/* Uncommit the reservation */
 	resv_huge_pages -= unused_resv_pages;
 
 	nr_pages = min(unused_resv_pages, surplus_huge_pages);
 
-	while (nr_pages) {
+	while (remaining_iterations-- && nr_pages) {
 		nid = next_node(nid, node_online_map);
 		if (nid == MAX_NUMNODES)
 			nid = first_node(node_online_map);
@@ -424,6 +432,7 @@
 			surplus_huge_pages--;
 			surplus_huge_pages_node[nid]--;
 			nr_pages--;
+			remaining_iterations = num_online_nodes();
 		}
 	}
 }
@@ -671,9 +680,11 @@
 {
 	return sprintf(buf,
 		"Node %d HugePages_Total: %5u\n"
-		"Node %d HugePages_Free:  %5u\n",
+		"Node %d HugePages_Free:  %5u\n"
+		"Node %d HugePages_Surp:  %5u\n",
 		nid, nr_huge_pages_node[nid],
-		nid, free_huge_pages_node[nid]);
+		nid, free_huge_pages_node[nid],
+		nid, surplus_huge_pages_node[nid]);
 }
 
 /* Return the number pages of memory we physically have, in PAGE_SIZE units. */
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 9b648bd..2e0bfc9 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -533,6 +533,9 @@
 	unsigned long nr_retries = MEM_CGROUP_RECLAIM_RETRIES;
 	struct mem_cgroup_per_zone *mz;
 
+	if (mem_cgroup_subsys.disabled)
+		return 0;
+
 	/*
 	 * Should page_cgroup's go to their own slab?
 	 * One could optimize the performance of the charging routine
@@ -665,6 +668,9 @@
 	struct mem_cgroup_per_zone *mz;
 	unsigned long flags;
 
+	if (mem_cgroup_subsys.disabled)
+		return;
+
 	/*
 	 * Check if our page_cgroup is valid
 	 */
@@ -705,6 +711,9 @@
 {
 	struct page_cgroup *pc;
 
+	if (mem_cgroup_subsys.disabled)
+		return 0;
+
 	lock_page_cgroup(page);
 	pc = page_get_page_cgroup(page);
 	if (pc)
@@ -803,6 +812,9 @@
 	int ret = -EBUSY;
 	int node, zid;
 
+	if (mem_cgroup_subsys.disabled)
+		return 0;
+
 	css_get(&mem->css);
 	/*
 	 * page reclaim code (kswapd etc..) will move pages between
@@ -966,7 +978,7 @@
 {
 	struct mem_cgroup_per_node *pn;
 	struct mem_cgroup_per_zone *mz;
-	int zone;
+	int zone, tmp = node;
 	/*
 	 * This routine is called against possible nodes.
 	 * But it's BUG to call kmalloc() against offline node.
@@ -975,10 +987,9 @@
 	 *       never be onlined. It's better to use memory hotplug callback
 	 *       function.
 	 */
-	if (node_state(node, N_HIGH_MEMORY))
-		pn = kmalloc_node(sizeof(*pn), GFP_KERNEL, node);
-	else
-		pn = kmalloc(sizeof(*pn), GFP_KERNEL);
+	if (!node_state(node, N_NORMAL_MEMORY))
+		tmp = -1;
+	pn = kmalloc_node(sizeof(*pn), GFP_KERNEL, tmp);
 	if (!pn)
 		return 1;
 
@@ -1053,6 +1064,8 @@
 static int mem_cgroup_populate(struct cgroup_subsys *ss,
 				struct cgroup *cont)
 {
+	if (mem_cgroup_subsys.disabled)
+		return 0;
 	return cgroup_add_files(cont, ss, mem_cgroup_files,
 					ARRAY_SIZE(mem_cgroup_files));
 }
@@ -1065,6 +1078,9 @@
 	struct mm_struct *mm;
 	struct mem_cgroup *mem, *old_mem;
 
+	if (mem_cgroup_subsys.disabled)
+		return;
+
 	mm = get_task_mm(p);
 	if (mm == NULL)
 		return;
diff --git a/mm/slub.c b/mm/slub.c
index b72bc98..acc975f 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1470,6 +1470,9 @@
 	void **object;
 	struct page *new;
 
+	/* We handle __GFP_ZERO in the caller */
+	gfpflags &= ~__GFP_ZERO;
+
 	if (!c->page)
 		goto new_slab;
 
@@ -2685,7 +2688,7 @@
 }
 EXPORT_SYMBOL(kfree);
 
-#if defined(SLUB_DEBUG) || defined(CONFIG_SLABINFO)
+#if defined(CONFIG_SLUB_DEBUG) || defined(CONFIG_SLABINFO)
 static unsigned long count_partial(struct kmem_cache_node *n)
 {
 	unsigned long flags;
diff --git a/mm/sparse-vmemmap.c b/mm/sparse-vmemmap.c
index cd75b21..99c4f36 100644
--- a/mm/sparse-vmemmap.c
+++ b/mm/sparse-vmemmap.c
@@ -76,7 +76,7 @@
 		pte_t entry;
 		void *p = vmemmap_alloc_block(PAGE_SIZE, node);
 		if (!p)
-			return 0;
+			return NULL;
 		entry = pfn_pte(__pa(p) >> PAGE_SHIFT, PAGE_KERNEL);
 		set_pte_at(&init_mm, addr, pte, entry);
 	}
@@ -89,7 +89,7 @@
 	if (pmd_none(*pmd)) {
 		void *p = vmemmap_alloc_block(PAGE_SIZE, node);
 		if (!p)
-			return 0;
+			return NULL;
 		pmd_populate_kernel(&init_mm, pmd, p);
 	}
 	return pmd;
@@ -101,7 +101,7 @@
 	if (pud_none(*pud)) {
 		void *p = vmemmap_alloc_block(PAGE_SIZE, node);
 		if (!p)
-			return 0;
+			return NULL;
 		pud_populate(&init_mm, pud, p);
 	}
 	return pud;
@@ -113,7 +113,7 @@
 	if (pgd_none(*pgd)) {
 		void *p = vmemmap_alloc_block(PAGE_SIZE, node);
 		if (!p)
-			return 0;
+			return NULL;
 		pgd_populate(&init_mm, pgd, p);
 	}
 	return pgd;
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index dbc81b9..b33410a 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -374,17 +374,35 @@
 	memcpy(vlan->real_dev_addr, dev->dev_addr, ETH_ALEN);
 }
 
+static void __vlan_device_event(struct net_device *dev, unsigned long event)
+{
+	switch (event) {
+	case NETDEV_CHANGENAME:
+		vlan_proc_rem_dev(dev);
+		if (vlan_proc_add_dev(dev) < 0)
+			pr_warning("8021q: failed to change proc name for %s\n",
+					dev->name);
+		break;
+	}
+}
+
 static int vlan_device_event(struct notifier_block *unused, unsigned long event,
 			     void *ptr)
 {
 	struct net_device *dev = ptr;
-	struct vlan_group *grp = __vlan_find_group(dev->ifindex);
+	struct vlan_group *grp;
 	int i, flgs;
 	struct net_device *vlandev;
 
 	if (dev->nd_net != &init_net)
 		return NOTIFY_DONE;
 
+	if (is_vlan_dev(dev)) {
+		__vlan_device_event(dev, event);
+		goto out;
+	}
+
+	grp = __vlan_find_group(dev->ifindex);
 	if (!grp)
 		goto out;
 
diff --git a/net/8021q/vlan.h b/net/8021q/vlan.h
index 73efcc71..51271ae 100644
--- a/net/8021q/vlan.h
+++ b/net/8021q/vlan.h
@@ -45,4 +45,9 @@
 
 extern struct rtnl_link_ops vlan_link_ops;
 
+static inline int is_vlan_dev(struct net_device *dev)
+{
+	return dev->priv_flags & IFF_802_1Q_VLAN;
+}
+
 #endif /* !(__BEN_VLAN_802_1Q_INC__) */
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index 8fbcefe..41a76a0 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -660,7 +660,7 @@
 	int subclass = 0;
 
 	/* IFF_BROADCAST|IFF_MULTICAST; ??? */
-	dev->flags  = real_dev->flags & ~IFF_UP;
+	dev->flags  = real_dev->flags & ~(IFF_UP | IFF_PROMISC | IFF_ALLMULTI);
 	dev->iflink = real_dev->ifindex;
 	dev->state  = (real_dev->state & ((1<<__LINK_STATE_NOCARRIER) |
 					  (1<<__LINK_STATE_DORMANT))) |
@@ -692,6 +692,20 @@
 	return 0;
 }
 
+static void vlan_dev_uninit(struct net_device *dev)
+{
+	struct vlan_priority_tci_mapping *pm;
+	struct vlan_dev_info *vlan = vlan_dev_info(dev);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(vlan->egress_priority_map); i++) {
+		while ((pm = vlan->egress_priority_map[i]) != NULL) {
+			vlan->egress_priority_map[i] = pm->next;
+			kfree(pm);
+		}
+	}
+}
+
 void vlan_setup(struct net_device *dev)
 {
 	ether_setup(dev);
@@ -701,6 +715,7 @@
 
 	dev->change_mtu		= vlan_dev_change_mtu;
 	dev->init		= vlan_dev_init;
+	dev->uninit		= vlan_dev_uninit;
 	dev->open		= vlan_dev_open;
 	dev->stop		= vlan_dev_stop;
 	dev->set_mac_address	= vlan_dev_set_mac_address;
diff --git a/net/8021q/vlanproc.c b/net/8021q/vlanproc.c
index 146cfb0..9671aa5 100644
--- a/net/8021q/vlanproc.c
+++ b/net/8021q/vlanproc.c
@@ -210,11 +210,6 @@
  * The following few functions build the content of /proc/net/vlan/config
  */
 
-static inline int is_vlan_dev(struct net_device *dev)
-{
-	return dev->priv_flags & IFF_802_1Q_VLAN;
-}
-
 /* start read of /proc/net/vlan/config */
 static void *vlan_seq_start(struct seq_file *seq, loff_t *pos)
 	__acquires(dev_base_lock)
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index 4e8d4e7..f624dff 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -1520,7 +1520,7 @@
 	v9fs_register_trans(&p9_unix_trans);
 	v9fs_register_trans(&p9_fd_trans);
 
-	return 1;
+	return 0;
 }
 
 module_init(p9_trans_fd_init);
diff --git a/net/atm/lec.c b/net/atm/lec.c
index a2efa7ff..3235c57 100644
--- a/net/atm/lec.c
+++ b/net/atm/lec.c
@@ -266,7 +266,6 @@
 	char buf[300];
 	int i = 0;
 #endif /* DUMP_PACKETS >0 */
-	DECLARE_MAC_BUF(mac);
 
 	pr_debug("lec_start_xmit called\n");
 	if (!priv->lecd) {
@@ -374,15 +373,19 @@
 		if (entry && (entry->tx_wait.qlen < LEC_UNRES_QUE_LEN)) {
 			pr_debug("%s:lec_start_xmit: queuing packet, ",
 				dev->name);
-			pr_debug("MAC address %s\n",
-				 print_mac(mac, lec_h->h_dest));
+			pr_debug("MAC address " MAC_FMT "\n",
+				 lec_h->h_dest[0], lec_h->h_dest[1],
+				 lec_h->h_dest[2], lec_h->h_dest[3],
+				 lec_h->h_dest[4], lec_h->h_dest[5]);
 			skb_queue_tail(&entry->tx_wait, skb);
 		} else {
 			pr_debug
 			    ("%s:lec_start_xmit: tx queue full or no arp entry, dropping, ",
 			     dev->name);
-			pr_debug("MAC address %s\n",
-				 print_mac(mac, lec_h->h_dest));
+			pr_debug("MAC address " MAC_FMT "\n",
+				 lec_h->h_dest[0], lec_h->h_dest[1],
+				 lec_h->h_dest[2], lec_h->h_dest[3],
+				 lec_h->h_dest[4], lec_h->h_dest[5]);
 			priv->stats.tx_dropped++;
 			dev_kfree_skb(skb);
 		}
@@ -394,8 +397,10 @@
 
 	while (entry && (skb2 = skb_dequeue(&entry->tx_wait))) {
 		pr_debug("lec.c: emptying tx queue, ");
-		pr_debug("MAC address %s\n",
-			 print_mac(mac, lec_h->h_dest));
+		pr_debug("MAC address " MAC_FMT "\n",
+			 lec_h->h_dest[0], lec_h->h_dest[1],
+			 lec_h->h_dest[2], lec_h->h_dest[3],
+			 lec_h->h_dest[4], lec_h->h_dest[5]);
 		lec_send(vcc, skb2, priv);
 	}
 
@@ -449,7 +454,6 @@
 	struct lec_arp_table *entry;
 	int i;
 	char *tmp;		/* FIXME */
-	DECLARE_MAC_BUF(mac);
 
 	atomic_sub(skb->truesize, &sk_atm(vcc)->sk_wmem_alloc);
 	mesg = (struct atmlec_msg *)skb->data;
@@ -536,9 +540,14 @@
 			struct net_bridge_fdb_entry *f;
 
 			pr_debug
-			    ("%s: bridge zeppelin asks about %s\n",
+			    ("%s: bridge zeppelin asks about " MAC_FMT "\n",
 			     dev->name,
-			     print_mac(mac, mesg->content.proxy.mac_addr));
+			     mesg->content.proxy.mac_addr[0],
+			     mesg->content.proxy.mac_addr[1],
+			     mesg->content.proxy.mac_addr[2],
+			     mesg->content.proxy.mac_addr[3],
+			     mesg->content.proxy.mac_addr[4],
+			     mesg->content.proxy.mac_addr[5]);
 
 			if (br_fdb_get_hook == NULL || dev->br_port == NULL)
 				break;
diff --git a/net/ax25/TODO b/net/ax25/TODO
index 4089c49..69fb4e3 100644
--- a/net/ax25/TODO
+++ b/net/ax25/TODO
@@ -9,10 +9,6 @@
 Routes to a device being taken down might be deleted by ax25_rt_device_down
 but added by somebody else before the device has been deleted fully.
 
-Massive amounts of lock_kernel / unlock_kernel are just a temporary solution to
-get around the removal of SOCKOPS_WRAP.  A serious locking strategy has to be
-implemented.
-
 The ax25_rt_find_route synopsys is pervert but I somehow had to deal with
 the race caused by the static variable in it's previous implementation.
 
diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c
index 1220d8a..d366423 100644
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -53,6 +53,30 @@
 /* Bluetooth sockets */
 #define BT_MAX_PROTO	8
 static struct net_proto_family *bt_proto[BT_MAX_PROTO];
+
+static struct lock_class_key bt_slock_key[BT_MAX_PROTO];
+static struct lock_class_key bt_lock_key[BT_MAX_PROTO];
+static const char *bt_key_strings[BT_MAX_PROTO] = {
+	"sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP",
+	"sk_lock-AF_BLUETOOTH-BTPROTO_HCI",
+	"sk_lock-AF_BLUETOOTH-BTPROTO_SCO",
+	"sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM",
+	"sk_lock-AF_BLUETOOTH-BTPROTO_BNEP",
+	"sk_lock-AF_BLUETOOTH-BTPROTO_CMTP",
+	"sk_lock-AF_BLUETOOTH-BTPROTO_HIDP",
+	"sk_lock-AF_BLUETOOTH-BTPROTO_AVDTP",
+};
+
+static const char *bt_slock_key_strings[BT_MAX_PROTO] = {
+	"slock-AF_BLUETOOTH-BTPROTO_L2CAP",
+	"slock-AF_BLUETOOTH-BTPROTO_HCI",
+	"slock-AF_BLUETOOTH-BTPROTO_SCO",
+	"slock-AF_BLUETOOTH-BTPROTO_RFCOMM",
+	"slock-AF_BLUETOOTH-BTPROTO_BNEP",
+	"slock-AF_BLUETOOTH-BTPROTO_CMTP",
+	"slock-AF_BLUETOOTH-BTPROTO_HIDP",
+	"slock-AF_BLUETOOTH-BTPROTO_AVDTP",
+};
 static DEFINE_RWLOCK(bt_proto_lock);
 
 int bt_sock_register(int proto, struct net_proto_family *ops)
@@ -95,6 +119,21 @@
 }
 EXPORT_SYMBOL(bt_sock_unregister);
 
+static void bt_reclassify_sock_lock(struct socket *sock, int proto)
+{
+	struct sock *sk = sock->sk;
+
+	if (!sk)
+		return;
+	BUG_ON(sock_owned_by_user(sk));
+
+	sock_lock_init_class_and_name(sk,
+			bt_slock_key_strings[proto],
+			&bt_slock_key[proto],
+			bt_key_strings[proto],
+			&bt_lock_key[proto]);
+}
+
 static int bt_sock_create(struct net *net, struct socket *sock, int proto)
 {
 	int err;
@@ -117,6 +156,7 @@
 
 	if (bt_proto[proto] && try_module_get(bt_proto[proto]->owner)) {
 		err = bt_proto[proto]->create(net, sock, proto);
+		bt_reclassify_sock_lock(sock, proto);
 		module_put(bt_proto[proto]->owner);
 	}
 
diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index b5d4019..1d36c09 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -84,7 +84,7 @@
 };
 
 static struct bt_sock_list hci_sk_list = {
-	.lock = RW_LOCK_UNLOCKED
+	.lock = __RW_LOCK_UNLOCKED(hci_sk_list.lock)
 };
 
 /* Send frame to RAW socket */
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 34f8bf9..2957df4 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -62,7 +62,7 @@
 static const struct proto_ops l2cap_sock_ops;
 
 static struct bt_sock_list l2cap_sk_list = {
-	.lock = RW_LOCK_UNLOCKED
+	.lock = __RW_LOCK_UNLOCKED(l2cap_sk_list.lock)
 };
 
 static void __l2cap_sock_close(struct sock *sk, int reason);
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 0c2c937..eb62558 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -423,8 +423,8 @@
 
 		rfcomm_dlc_lock(d);
 		d->state = BT_CLOSED;
-		d->state_change(d, err);
 		rfcomm_dlc_unlock(d);
+		d->state_change(d, err);
 
 		skb_queue_purge(&d->tx_queue);
 		rfcomm_dlc_unlink(d);
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index c46d510..af4e393 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -60,7 +60,7 @@
 static const struct proto_ops rfcomm_sock_ops;
 
 static struct bt_sock_list rfcomm_sk_list = {
-	.lock = RW_LOCK_UNLOCKED
+	.lock = __RW_LOCK_UNLOCKED(rfcomm_sk_list.lock)
 };
 
 static void rfcomm_sock_close(struct sock *sk);
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index e4c779b..c3f749a 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -570,12 +570,7 @@
 					return;
 
 				rfcomm_dev_del(dev);
-				/* We have to drop DLC lock here, otherwise
-				   rfcomm_dev_put() will dead lock if it's
-				   the last reference. */
-				rfcomm_dlc_unlock(dlc);
 				rfcomm_dev_put(dev);
-				rfcomm_dlc_lock(dlc);
 			}
 		} else
 			tty_hangup(dev->tty);
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index b91d3c8..cd887cd 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -58,7 +58,7 @@
 static const struct proto_ops sco_sock_ops;
 
 static struct bt_sock_list sco_sk_list = {
-	.lock = RW_LOCK_UNLOCKED
+	.lock = __RW_LOCK_UNLOCKED(sco_sk_list.lock)
 };
 
 static void __sco_chan_add(struct sco_conn *conn, struct sock *sk, struct sock *parent);
diff --git a/net/core/dev.c b/net/core/dev.c
index fcdf03c..460e7f9 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3329,7 +3329,7 @@
 			return -EOPNOTSUPP;
 
 		case SIOCADDMULTI:
-			if (!dev->set_multicast_list ||
+			if ((!dev->set_multicast_list && !dev->set_rx_mode) ||
 			    ifr->ifr_hwaddr.sa_family != AF_UNSPEC)
 				return -EINVAL;
 			if (!netif_device_present(dev))
@@ -3338,7 +3338,7 @@
 					  dev->addr_len, 1);
 
 		case SIOCDELMULTI:
-			if (!dev->set_multicast_list ||
+			if ((!dev->set_multicast_list && !dev->set_rx_mode) ||
 			    ifr->ifr_hwaddr.sa_family != AF_UNSPEC)
 				return -EINVAL;
 			if (!netif_device_present(dev))
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index d9a02b2..19b8e00 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -466,6 +466,28 @@
 	goto out;
 }
 
+struct pneigh_entry *__pneigh_lookup(struct neigh_table *tbl,
+		struct net *net, const void *pkey, struct net_device *dev)
+{
+	struct pneigh_entry *n;
+	int key_len = tbl->key_len;
+	u32 hash_val = *(u32 *)(pkey + key_len - 4);
+
+	hash_val ^= (hash_val >> 16);
+	hash_val ^= hash_val >> 8;
+	hash_val ^= hash_val >> 4;
+	hash_val &= PNEIGH_HASHMASK;
+
+	for (n = tbl->phash_buckets[hash_val]; n; n = n->next) {
+		if (!memcmp(n->key, pkey, key_len) &&
+		    (n->net == net) &&
+		    (n->dev == dev || !n->dev))
+			break;
+	}
+
+	return n;
+}
+
 struct pneigh_entry * pneigh_lookup(struct neigh_table *tbl,
 				    struct net *net, const void *pkey,
 				    struct net_device *dev, int creat)
@@ -2803,6 +2825,7 @@
 EXPORT_SYMBOL(neigh_update);
 EXPORT_SYMBOL(pneigh_enqueue);
 EXPORT_SYMBOL(pneigh_lookup);
+EXPORT_SYMBOL_GPL(__pneigh_lookup);
 
 #ifdef CONFIG_ARPD
 EXPORT_SYMBOL(neigh_app_ns);
diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c
index 1e3f87c..200ee1e 100644
--- a/net/ieee80211/ieee80211_rx.c
+++ b/net/ieee80211/ieee80211_rx.c
@@ -271,7 +271,6 @@
 {
 	struct ieee80211_hdr_3addr *hdr;
 	int res, hdrlen;
-	DECLARE_MAC_BUF(mac);
 
 	if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL)
 		return 0;
@@ -283,8 +282,12 @@
 	res = crypt->ops->decrypt_mpdu(skb, hdrlen, crypt->priv);
 	atomic_dec(&crypt->refcnt);
 	if (res < 0) {
-		IEEE80211_DEBUG_DROP("decryption failed (SA=%s"
-				     ") res=%d\n", print_mac(mac, hdr->addr2), res);
+		IEEE80211_DEBUG_DROP("decryption failed (SA=" MAC_FMT
+				     ") res=%d\n",
+				     hdr->addr2[0], hdr->addr2[1],
+				     hdr->addr2[2], hdr->addr2[3],
+				     hdr->addr2[4], hdr->addr2[5],
+				     res);
 		if (res == -2)
 			IEEE80211_DEBUG_DROP("Decryption failed ICV "
 					     "mismatch (key %d)\n",
@@ -304,7 +307,6 @@
 {
 	struct ieee80211_hdr_3addr *hdr;
 	int res, hdrlen;
-	DECLARE_MAC_BUF(mac);
 
 	if (crypt == NULL || crypt->ops->decrypt_msdu == NULL)
 		return 0;
@@ -317,8 +319,12 @@
 	atomic_dec(&crypt->refcnt);
 	if (res < 0) {
 		printk(KERN_DEBUG "%s: MSDU decryption/MIC verification failed"
-		       " (SA=%s keyidx=%d)\n",
-		       ieee->dev->name, print_mac(mac, hdr->addr2), keyidx);
+		       " (SA=" MAC_FMT " keyidx=%d)\n",
+		       ieee->dev->name,
+		       hdr->addr2[0], hdr->addr2[1],
+		       hdr->addr2[2], hdr->addr2[3],
+		       hdr->addr2[4], hdr->addr2[5],
+		       keyidx);
 		return -1;
 	}
 
@@ -462,8 +468,10 @@
 			 * frames silently instead of filling system log with
 			 * these reports. */
 			IEEE80211_DEBUG_DROP("Decryption failed (not set)"
-					     " (SA=%s)\n",
-					     print_mac(mac, hdr->addr2));
+					     " (SA=" MAC_FMT ")\n",
+					     hdr->addr2[0], hdr->addr2[1],
+					     hdr->addr2[2], hdr->addr2[3],
+					     hdr->addr2[4], hdr->addr2[5]);
 			ieee->ieee_stats.rx_discards_undecryptable++;
 			goto rx_dropped;
 		}
@@ -474,8 +482,10 @@
 		    fc & IEEE80211_FCTL_PROTECTED && ieee->host_decrypt &&
 		    (keyidx = hostap_rx_frame_decrypt(ieee, skb, crypt)) < 0) {
 			printk(KERN_DEBUG "%s: failed to decrypt mgmt::auth "
-			       "from %s\n", dev->name,
-			       print_mac(mac, hdr->addr2));
+			       "from " MAC_FMT "\n", dev->name,
+			       hdr->addr2[0], hdr->addr2[1],
+			       hdr->addr2[2], hdr->addr2[3],
+			       hdr->addr2[4], hdr->addr2[5]);
 			/* TODO: could inform hostapd about this so that it
 			 * could send auth failure report */
 			goto rx_dropped;
@@ -653,8 +663,11 @@
 			 * configured */
 		} else {
 			IEEE80211_DEBUG_DROP("encryption configured, but RX "
-					     "frame not encrypted (SA=%s"
-					     ")\n", print_mac(mac, hdr->addr2));
+					     "frame not encrypted (SA="
+					     MAC_FMT ")\n",
+					     hdr->addr2[0], hdr->addr2[1],
+					     hdr->addr2[2], hdr->addr2[3],
+					     hdr->addr2[4], hdr->addr2[5]);
 			goto rx_dropped;
 		}
 	}
@@ -662,9 +675,11 @@
 	if (crypt && !(fc & IEEE80211_FCTL_PROTECTED) && !ieee->open_wep &&
 	    !ieee80211_is_eapol_frame(ieee, skb)) {
 		IEEE80211_DEBUG_DROP("dropped unencrypted RX data "
-				     "frame from %s"
+				     "frame from " MAC_FMT
 				     " (drop_unencrypted=1)\n",
-				     print_mac(mac, hdr->addr2));
+				     hdr->addr2[0], hdr->addr2[1],
+				     hdr->addr2[2], hdr->addr2[3],
+				     hdr->addr2[4], hdr->addr2[5]);
 		goto rx_dropped;
 	}
 
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 9c7e5ff..4670683 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -160,7 +160,7 @@
 
 	  If unsure, say Y. Note that if you want to use DHCP, a DHCP server
 	  must be operating on your network.  Read
-	  <file:Documentation/nfsroot.txt> for details.
+	  <file:Documentation/filesystems/nfsroot.txt> for details.
 
 config IP_PNP_BOOTP
 	bool "IP: BOOTP support"
@@ -175,7 +175,7 @@
 	  does BOOTP itself, providing all necessary information on the kernel
 	  command line, you can say N here. If unsure, say Y. Note that if you
 	  want to use BOOTP, a BOOTP server must be operating on your network.
-	  Read <file:Documentation/nfsroot.txt> for details.
+	  Read <file:Documentation/filesystems/nfsroot.txt> for details.
 
 config IP_PNP_RARP
 	bool "IP: RARP support"
@@ -187,8 +187,8 @@
 	  discovered automatically at boot time using the RARP protocol (an
 	  older protocol which is being obsoleted by BOOTP and DHCP), say Y
 	  here. Note that if you want to use RARP, a RARP server must be
-	  operating on your network. Read <file:Documentation/nfsroot.txt> for
-	  details.
+	  operating on your network. Read
+	  <file:Documentation/filesystems/nfsroot.txt> for details.
 
 # not yet ready..
 #   bool '    IP: ARP support' CONFIG_IP_PNP_ARP		
diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c
index f3ceca3..4e73e57 100644
--- a/net/ipv4/esp4.c
+++ b/net/ipv4/esp4.c
@@ -336,7 +336,7 @@
 	struct scatterlist *asg;
 	int err = -EINVAL;
 
-	if (!pskb_may_pull(skb, sizeof(*esph)))
+	if (!pskb_may_pull(skb, sizeof(*esph) + crypto_aead_ivsize(aead)))
 		goto out;
 
 	if (elen <= 0)
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index a13c074..40508ba 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -591,7 +591,7 @@
 		}
 
 		if (xfrm_decode_session_reverse(skb_in, &fl, AF_INET))
-			goto out_unlock;
+			goto relookup_failed;
 
 		if (inet_addr_type(net, fl.fl4_src) == RTN_LOCAL)
 			err = __ip_route_output_key(net, &rt2, &fl);
@@ -601,7 +601,7 @@
 
 			fl2.fl4_dst = fl.fl4_src;
 			if (ip_route_output_key(net, &rt2, &fl2))
-				goto out_unlock;
+				goto relookup_failed;
 
 			/* Ugh! */
 			odst = skb_in->dst;
@@ -614,21 +614,23 @@
 		}
 
 		if (err)
-			goto out_unlock;
+			goto relookup_failed;
 
 		err = xfrm_lookup((struct dst_entry **)&rt2, &fl, NULL,
 				  XFRM_LOOKUP_ICMP);
-		if (err == -ENOENT) {
+		switch (err) {
+		case 0:
+			dst_release(&rt->u.dst);
+			rt = rt2;
+			break;
+		case -EPERM:
+			goto ende;
+		default:
+relookup_failed:
 			if (!rt)
 				goto out_unlock;
-			goto route_done;
+			break;
 		}
-
-		dst_release(&rt->u.dst);
-		rt = rt2;
-
-		if (err)
-			goto out_unlock;
 	}
 
 route_done:
diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c
index 724d69a..a0a3c78 100644
--- a/net/ipv4/inet_fragment.c
+++ b/net/ipv4/inet_fragment.c
@@ -86,7 +86,10 @@
 void inet_frags_exit_net(struct netns_frags *nf, struct inet_frags *f)
 {
 	nf->low_thresh = 0;
+
+	local_bh_disable();
 	inet_frag_evictor(nf, f);
+	local_bh_enable();
 }
 EXPORT_SYMBOL(inet_frags_exit_net);
 
diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c
index 876169f..717c411 100644
--- a/net/ipv4/inet_timewait_sock.c
+++ b/net/ipv4/inet_timewait_sock.c
@@ -124,6 +124,7 @@
 		tw->tw_hash	    = sk->sk_hash;
 		tw->tw_ipv6only	    = 0;
 		tw->tw_prot	    = sk->sk_prot_creator;
+		tw->tw_net          = sk->sk_net;
 		atomic_set(&tw->tw_refcnt, 1);
 		inet_twsk_dead_node_init(tw);
 		__module_get(tw->tw_prot->owner);
diff --git a/net/ipv4/ip_forward.c b/net/ipv4/ip_forward.c
index 0b3b328..a4506c8 100644
--- a/net/ipv4/ip_forward.c
+++ b/net/ipv4/ip_forward.c
@@ -85,7 +85,7 @@
 	if (opt->is_strictroute && rt->rt_dst != rt->rt_gateway)
 		goto sr_failed;
 
-	if (unlikely(skb->len > dst_mtu(&rt->u.dst) &&
+	if (unlikely(skb->len > dst_mtu(&rt->u.dst) && !skb_is_gso(skb) &&
 		     (ip_hdr(skb)->frag_off & htons(IP_DF))) && !skb->local_df) {
 		IP_INC_STATS(IPSTATS_MIB_FRAGFAILS);
 		icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED,
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index f72457b..c2921d0 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -1132,7 +1132,7 @@
 	}
 	release_sock(sk);
 
-	if (len < sizeof(int) && len > 0 && val>=0 && val<255) {
+	if (len < sizeof(int) && len > 0 && val>=0 && val<=255) {
 		unsigned char ucval = (unsigned char)val;
 		len = 1;
 		if (put_user(len, optlen))
diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index 7c992fb..4824fe8 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -1411,7 +1411,7 @@
 
 /*
  *  Decode any IP configuration options in the "ip=" or "nfsaddrs=" kernel
- *  command line parameter.  See Documentation/nfsroot.txt.
+ *  command line parameter.  See Documentation/filesystems/nfsroot.txt.
  */
 static int __init ic_proto_name(char *name)
 {
diff --git a/net/ipv4/netfilter/ip_queue.c b/net/ipv4/netfilter/ip_queue.c
index fe05da4..4dc1628 100644
--- a/net/ipv4/netfilter/ip_queue.c
+++ b/net/ipv4/netfilter/ip_queue.c
@@ -588,11 +588,9 @@
 	}
 
 #ifdef CONFIG_PROC_FS
-	proc = create_proc_entry(IPQ_PROC_FS_NAME, 0, init_net.proc_net);
-	if (proc) {
-		proc->owner = THIS_MODULE;
-		proc->proc_fops = &ip_queue_proc_fops;
-	} else {
+	proc = proc_create(IPQ_PROC_FS_NAME, 0, init_net.proc_net,
+			   &ip_queue_proc_fops);
+	if (!proc) {
 		printk(KERN_ERR "ip_queue: failed to create proc entry\n");
 		goto cleanup_ipqnl;
 	}
diff --git a/net/ipv4/netfilter/ipt_CLUSTERIP.c b/net/ipv4/netfilter/ipt_CLUSTERIP.c
index c6cf84c..52926c8 100644
--- a/net/ipv4/netfilter/ipt_CLUSTERIP.c
+++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c
@@ -167,14 +167,13 @@
 
 		/* create proc dir entry */
 		sprintf(buffer, "%u.%u.%u.%u", NIPQUAD(ip));
-		c->pde = create_proc_entry(buffer, S_IWUSR|S_IRUSR,
-					   clusterip_procdir);
+		c->pde = proc_create(buffer, S_IWUSR|S_IRUSR,
+				     clusterip_procdir, &clusterip_proc_fops);
 		if (!c->pde) {
 			kfree(c);
 			return NULL;
 		}
 	}
-	c->pde->proc_fops = &clusterip_proc_fops;
 	c->pde->data = c;
 #endif
 
diff --git a/net/ipv4/netfilter/ipt_recent.c b/net/ipv4/netfilter/ipt_recent.c
index 8e8f042..50e0669 100644
--- a/net/ipv4/netfilter/ipt_recent.c
+++ b/net/ipv4/netfilter/ipt_recent.c
@@ -276,12 +276,11 @@
 	for (i = 0; i < ip_list_hash_size; i++)
 		INIT_LIST_HEAD(&t->iphash[i]);
 #ifdef CONFIG_PROC_FS
-	t->proc = create_proc_entry(t->name, ip_list_perms, proc_dir);
+	t->proc = proc_create(t->name, ip_list_perms, proc_dir, &recent_fops);
 	if (t->proc == NULL) {
 		kfree(t);
 		goto out;
 	}
-	t->proc->proc_fops = &recent_fops;
 	t->proc->uid       = ip_list_uid;
 	t->proc->gid       = ip_list_gid;
 	t->proc->data      = t;
diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c
index 089252e..f500b0f 100644
--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c
+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c
@@ -395,13 +395,10 @@
 	if (!proc_exp)
 		goto err2;
 
-	proc_stat = create_proc_entry("ip_conntrack", S_IRUGO, init_net.proc_net_stat);
+	proc_stat = proc_create("ip_conntrack", S_IRUGO,
+				init_net.proc_net_stat, &ct_cpu_seq_fops);
 	if (!proc_stat)
 		goto err3;
-
-	proc_stat->proc_fops = &ct_cpu_seq_fops;
-	proc_stat->owner = THIS_MODULE;
-
 	return 0;
 
 err3:
diff --git a/net/ipv4/netfilter/nf_nat_core.c b/net/ipv4/netfilter/nf_nat_core.c
index 0d5fa3a..36b4e3b 100644
--- a/net/ipv4/netfilter/nf_nat_core.c
+++ b/net/ipv4/netfilter/nf_nat_core.c
@@ -629,6 +629,8 @@
 	size_t i;
 	int ret;
 
+	need_ipv4_conntrack();
+
 	ret = nf_ct_extend_register(&nat_extend);
 	if (ret < 0) {
 		printk(KERN_ERR "nf_nat_core: Unable to register extension\n");
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 7facdb0..5119856 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1625,13 +1625,11 @@
 	return flag;
 }
 
-/* If we receive more dupacks than we expected counting segments
- * in assumption of absent reordering, interpret this as reordering.
- * The only another reason could be bug in receiver TCP.
+/* Limits sacked_out so that sum with lost_out isn't ever larger than
+ * packets_out. Returns zero if sacked_out adjustement wasn't necessary.
  */
-static void tcp_check_reno_reordering(struct sock *sk, const int addend)
+int tcp_limit_reno_sacked(struct tcp_sock *tp)
 {
-	struct tcp_sock *tp = tcp_sk(sk);
 	u32 holes;
 
 	holes = max(tp->lost_out, 1U);
@@ -1639,8 +1637,20 @@
 
 	if ((tp->sacked_out + holes) > tp->packets_out) {
 		tp->sacked_out = tp->packets_out - holes;
-		tcp_update_reordering(sk, tp->packets_out + addend, 0);
+		return 1;
 	}
+	return 0;
+}
+
+/* If we receive more dupacks than we expected counting segments
+ * in assumption of absent reordering, interpret this as reordering.
+ * The only another reason could be bug in receiver TCP.
+ */
+static void tcp_check_reno_reordering(struct sock *sk, const int addend)
+{
+	struct tcp_sock *tp = tcp_sk(sk);
+	if (tcp_limit_reno_sacked(tp))
+		tcp_update_reordering(sk, tp->packets_out + addend, 0);
 }
 
 /* Emulate SACKs for SACKless connection: account for a new dupack. */
@@ -1681,11 +1691,16 @@
 int tcp_use_frto(struct sock *sk)
 {
 	const struct tcp_sock *tp = tcp_sk(sk);
+	const struct inet_connection_sock *icsk = inet_csk(sk);
 	struct sk_buff *skb;
 
 	if (!sysctl_tcp_frto)
 		return 0;
 
+	/* MTU probe and F-RTO won't really play nicely along currently */
+	if (icsk->icsk_mtup.probe_size)
+		return 0;
+
 	if (IsSackFrto())
 		return 1;
 
@@ -2134,11 +2149,13 @@
 /* Mark head of queue up as lost. With RFC3517 SACK, the packets is
  * is against sacked "cnt", otherwise it's against facked "cnt"
  */
-static void tcp_mark_head_lost(struct sock *sk, int packets, int fast_rexmit)
+static void tcp_mark_head_lost(struct sock *sk, int packets)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 	struct sk_buff *skb;
-	int cnt;
+	int cnt, oldcnt;
+	int err;
+	unsigned int mss;
 
 	BUG_TRAP(packets <= tp->packets_out);
 	if (tp->lost_skb_hint) {
@@ -2157,13 +2174,25 @@
 		tp->lost_skb_hint = skb;
 		tp->lost_cnt_hint = cnt;
 
+		if (after(TCP_SKB_CB(skb)->end_seq, tp->high_seq))
+			break;
+
+		oldcnt = cnt;
 		if (tcp_is_fack(tp) || tcp_is_reno(tp) ||
 		    (TCP_SKB_CB(skb)->sacked & TCPCB_SACKED_ACKED))
 			cnt += tcp_skb_pcount(skb);
 
-		if (((!fast_rexmit || (tp->lost_out > 0)) && (cnt > packets)) ||
-		    after(TCP_SKB_CB(skb)->end_seq, tp->high_seq))
-			break;
+		if (cnt > packets) {
+			if (tcp_is_sack(tp) || (oldcnt >= packets))
+				break;
+
+			mss = skb_shinfo(skb)->gso_size;
+			err = tcp_fragment(sk, skb, (packets - oldcnt) * mss, mss);
+			if (err < 0)
+				break;
+			cnt = packets;
+		}
+
 		if (!(TCP_SKB_CB(skb)->sacked & (TCPCB_SACKED_ACKED|TCPCB_LOST))) {
 			TCP_SKB_CB(skb)->sacked |= TCPCB_LOST;
 			tp->lost_out += tcp_skb_pcount(skb);
@@ -2180,17 +2209,17 @@
 	struct tcp_sock *tp = tcp_sk(sk);
 
 	if (tcp_is_reno(tp)) {
-		tcp_mark_head_lost(sk, 1, fast_rexmit);
+		tcp_mark_head_lost(sk, 1);
 	} else if (tcp_is_fack(tp)) {
 		int lost = tp->fackets_out - tp->reordering;
 		if (lost <= 0)
 			lost = 1;
-		tcp_mark_head_lost(sk, lost, fast_rexmit);
+		tcp_mark_head_lost(sk, lost);
 	} else {
 		int sacked_upto = tp->sacked_out - tp->reordering;
-		if (sacked_upto < 0)
-			sacked_upto = 0;
-		tcp_mark_head_lost(sk, sacked_upto, fast_rexmit);
+		if (sacked_upto < fast_rexmit)
+			sacked_upto = fast_rexmit;
+		tcp_mark_head_lost(sk, sacked_upto);
 	}
 
 	/* New heuristics: it is possible only after we switched
@@ -2524,7 +2553,7 @@
 	    before(tp->snd_una, tp->high_seq) &&
 	    icsk->icsk_ca_state != TCP_CA_Open &&
 	    tp->fackets_out > tp->reordering) {
-		tcp_mark_head_lost(sk, tp->fackets_out - tp->reordering, 0);
+		tcp_mark_head_lost(sk, tp->fackets_out - tp->reordering);
 		NET_INC_STATS_BH(LINUX_MIB_TCPLOSS);
 	}
 
@@ -2586,6 +2615,8 @@
 	case TCP_CA_Loss:
 		if (flag & FLAG_DATA_ACKED)
 			icsk->icsk_retransmits = 0;
+		if (tcp_is_reno(tp) && flag & FLAG_SND_UNA_ADVANCED)
+			tcp_reset_reno_sack(tp);
 		if (!tcp_try_undo_loss(sk)) {
 			tcp_moderate_cwnd(tp);
 			tcp_xmit_retransmit_queue(sk);
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 72b9350..d29ef79 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1808,6 +1808,9 @@
 	if (!lost)
 		return;
 
+	if (tcp_is_reno(tp))
+		tcp_limit_reno_sacked(tp);
+
 	tcp_verify_left_out(tp);
 
 	/* Don't muck with the congestion window here.
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 7ea1b67..1704c14 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1556,14 +1556,14 @@
 	__acquires(udp_hash_lock)
 {
 	read_lock(&udp_hash_lock);
-	return *pos ? udp_get_idx(seq, *pos-1) : (void *)1;
+	return *pos ? udp_get_idx(seq, *pos-1) : SEQ_START_TOKEN;
 }
 
 static void *udp_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 {
 	struct sock *sk;
 
-	if (v == (void *)1)
+	if (v == SEQ_START_TOKEN)
 		sk = udp_get_idx(seq, 0);
 	else
 		sk = udp_get_next(seq, v);
diff --git a/net/ipv4/xfrm4_mode_beet.c b/net/ipv4/xfrm4_mode_beet.c
index b47030b..9c798ab 100644
--- a/net/ipv4/xfrm4_mode_beet.c
+++ b/net/ipv4/xfrm4_mode_beet.c
@@ -39,13 +39,11 @@
 static int xfrm4_beet_output(struct xfrm_state *x, struct sk_buff *skb)
 {
 	struct ip_beet_phdr *ph;
-	struct iphdr *iph, *top_iph;
+	struct iphdr *top_iph;
 	int hdrlen, optlen;
 
-	iph = ip_hdr(skb);
-
 	hdrlen = 0;
-	optlen = iph->ihl * 4 - sizeof(*iph);
+	optlen = XFRM_MODE_SKB_CB(skb)->optlen;
 	if (unlikely(optlen))
 		hdrlen += IPV4_BEET_PHMAXLEN - (optlen & 4);
 
@@ -53,11 +51,12 @@
 				    hdrlen);
 	skb->mac_header = skb->network_header +
 			  offsetof(struct iphdr, protocol);
-	skb->transport_header = skb->network_header + sizeof(*iph);
+	skb->transport_header = skb->network_header + sizeof(*top_iph);
 
 	xfrm4_beet_make_header(skb);
 
-	ph = (struct ip_beet_phdr *)__skb_pull(skb, sizeof(*iph) - hdrlen);
+	ph = (struct ip_beet_phdr *)
+		__skb_pull(skb, XFRM_MODE_SKB_CB(skb)->ihl - hdrlen);
 
 	top_iph = ip_hdr(skb);
 
diff --git a/net/ipv4/xfrm4_mode_tunnel.c b/net/ipv4/xfrm4_mode_tunnel.c
index 8dee617..584e6d7 100644
--- a/net/ipv4/xfrm4_mode_tunnel.c
+++ b/net/ipv4/xfrm4_mode_tunnel.c
@@ -41,7 +41,7 @@
 	top_iph->ihl = 5;
 	top_iph->version = 4;
 
-	top_iph->protocol = x->inner_mode->afinfo->proto;
+	top_iph->protocol = xfrm_af2proto(skb->dst->ops->family);
 
 	/* DS disclosed */
 	top_iph->tos = INET_ECN_encapsulate(XFRM_MODE_SKB_CB(skb)->tos,
diff --git a/net/ipv4/xfrm4_output.c b/net/ipv4/xfrm4_output.c
index d5a58a8..8c3180a 100644
--- a/net/ipv4/xfrm4_output.c
+++ b/net/ipv4/xfrm4_output.c
@@ -56,7 +56,7 @@
 {
 	int err;
 
-	err = x->inner_mode->afinfo->extract_output(x, skb);
+	err = xfrm_inner_extract_output(x, skb);
 	if (err)
 		return err;
 
diff --git a/net/ipv4/xfrm4_state.c b/net/ipv4/xfrm4_state.c
index fdeebe6..07735ed 100644
--- a/net/ipv4/xfrm4_state.c
+++ b/net/ipv4/xfrm4_state.c
@@ -52,10 +52,12 @@
 {
 	struct iphdr *iph = ip_hdr(skb);
 
+	XFRM_MODE_SKB_CB(skb)->ihl = sizeof(*iph);
 	XFRM_MODE_SKB_CB(skb)->id = iph->id;
 	XFRM_MODE_SKB_CB(skb)->frag_off = iph->frag_off;
 	XFRM_MODE_SKB_CB(skb)->tos = iph->tos;
 	XFRM_MODE_SKB_CB(skb)->ttl = iph->ttl;
+	XFRM_MODE_SKB_CB(skb)->optlen = iph->ihl * 4 - sizeof(*iph);
 	memset(XFRM_MODE_SKB_CB(skb)->flow_lbl, 0,
 	       sizeof(XFRM_MODE_SKB_CB(skb)->flow_lbl));
 
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 101e0e70b..a65935a 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -776,6 +776,7 @@
 	struct inet6_dev *idev = ifp->idev;
 	struct in6_addr addr, *tmpaddr;
 	unsigned long tmp_prefered_lft, tmp_valid_lft, tmp_cstamp, tmp_tstamp;
+	unsigned long regen_advance;
 	int tmp_plen;
 	int ret = 0;
 	int max_addresses;
@@ -836,8 +837,23 @@
 	tmp_tstamp = ifp->tstamp;
 	spin_unlock_bh(&ifp->lock);
 
+	regen_advance = idev->cnf.regen_max_retry *
+	                idev->cnf.dad_transmits *
+	                idev->nd_parms->retrans_time / HZ;
 	write_unlock(&idev->lock);
 
+	/* A temporary address is created only if this calculated Preferred
+	 * Lifetime is greater than REGEN_ADVANCE time units.  In particular,
+	 * an implementation must not create a temporary address with a zero
+	 * Preferred Lifetime.
+	 */
+	if (tmp_prefered_lft <= regen_advance) {
+		in6_ifa_put(ifp);
+		in6_dev_put(idev);
+		ret = -1;
+		goto out;
+	}
+
 	addr_flags = IFA_F_TEMPORARY;
 	/* set in addrconf_prefix_rcv() */
 	if (ifp->flags & IFA_F_OPTIMISTIC)
@@ -1831,6 +1847,9 @@
 				 * lifetimes of an existing temporary address
 				 * when processing a Prefix Information Option.
 				 */
+				if (ifp != ift->ifpub)
+					continue;
+
 				spin_lock(&ift->lock);
 				flags = ift->flags;
 				if (ift->valid_lft > valid_lft &&
@@ -2437,7 +2456,7 @@
 
 	ASSERT_RTNL();
 
-	if (dev == init_net.loopback_dev && how == 1)
+	if ((dev->flags & IFF_LOOPBACK) && how == 1)
 		how = 0;
 
 	rt6_ifdown(dev);
@@ -2450,7 +2469,7 @@
 	/* Step 1: remove reference to ipv6 device from parent device.
 		   Do not dev_put!
 	 */
-	if (how == 1) {
+	if (how) {
 		idev->dead = 1;
 
 		/* protected by rtnl_lock */
@@ -2482,12 +2501,12 @@
 	write_lock_bh(&idev->lock);
 
 	/* Step 3: clear flags for stateless addrconf */
-	if (how != 1)
+	if (!how)
 		idev->if_flags &= ~(IF_RS_SENT|IF_RA_RCVD|IF_READY);
 
 	/* Step 4: clear address list */
 #ifdef CONFIG_IPV6_PRIVACY
-	if (how == 1 && del_timer(&idev->regen_timer))
+	if (how && del_timer(&idev->regen_timer))
 		in6_dev_put(idev);
 
 	/* clear tempaddr list */
@@ -2524,7 +2543,7 @@
 
 	/* Step 5: Discard multicast list */
 
-	if (how == 1)
+	if (how)
 		ipv6_mc_destroy_dev(idev);
 	else
 		ipv6_mc_down(idev);
@@ -2533,7 +2552,7 @@
 
 	/* Shot the device (if unregistered) */
 
-	if (how == 1) {
+	if (how) {
 		addrconf_sysctl_unregister(idev);
 		neigh_parms_release(&nd_tbl, idev->nd_parms);
 		neigh_ifdown(&nd_tbl, dev);
diff --git a/net/ipv6/anycast.c b/net/ipv6/anycast.c
index 9c7f83f..e5f56c9 100644
--- a/net/ipv6/anycast.c
+++ b/net/ipv6/anycast.c
@@ -334,9 +334,7 @@
 	idev->ac_list = aca;
 	write_unlock_bh(&idev->lock);
 
-	dst_hold(&rt->u.dst);
-	if (ip6_ins_rt(rt))
-		dst_release(&rt->u.dst);
+	ip6_ins_rt(rt);
 
 	addrconf_join_solict(dev, &aca->aca_addr);
 
@@ -378,10 +376,7 @@
 	addrconf_leave_solict(idev, &aca->aca_addr);
 
 	dst_hold(&aca->aca_rt->u.dst);
-	if (ip6_del_rt(aca->aca_rt))
-		dst_free(&aca->aca_rt->u.dst);
-	else
-		dst_release(&aca->aca_rt->u.dst);
+	ip6_del_rt(aca->aca_rt);
 
 	aca_put(aca);
 	return 0;
diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c
index 0ec1402..c6bb4c6 100644
--- a/net/ipv6/esp6.c
+++ b/net/ipv6/esp6.c
@@ -282,7 +282,7 @@
 	struct scatterlist *sg;
 	struct scatterlist *asg;
 
-	if (!pskb_may_pull(skb, sizeof(*esph))) {
+	if (!pskb_may_pull(skb, sizeof(*esph) + crypto_aead_ivsize(aead))) {
 		ret = -EINVAL;
 		goto out;
 	}
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index 121d517..893287ec 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -436,24 +436,26 @@
 	}
 
 	if (xfrm_decode_session_reverse(skb, &fl2, AF_INET6))
-		goto out;
+		goto relookup_failed;
 
 	if (ip6_dst_lookup(sk, &dst2, &fl))
-		goto out;
+		goto relookup_failed;
 
 	err = xfrm_lookup(&dst2, &fl, sk, XFRM_LOOKUP_ICMP);
-	if (err == -ENOENT) {
+	switch (err) {
+	case 0:
+		dst_release(dst);
+		dst = dst2;
+		break;
+	case -EPERM:
+		goto out_dst_release;
+	default:
+relookup_failed:
 		if (!dst)
 			goto out;
-		goto route_done;
+		break;
 	}
 
-	dst_release(dst);
-	dst = dst2;
-
-	if (err)
-		goto out;
-
 route_done:
 	if (ipv6_addr_is_multicast(&fl.fl6_dst))
 		hlimit = np->mcast_hops;
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index 178aebc..98ab4f4 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -239,8 +239,7 @@
 	IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_INMCASTPKTS);
 
 	hdr = ipv6_hdr(skb);
-	deliver = unlikely(skb->dev->flags & (IFF_PROMISC|IFF_ALLMULTI)) ||
-	    ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL);
+	deliver = ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL);
 
 	/*
 	 *	IPv6 multicast router mode isnt currently supported.
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 51557c2..452a2ac 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -676,6 +676,20 @@
 	}
 }
 
+static struct pneigh_entry *pndisc_check_router(struct net_device *dev,
+		struct in6_addr *addr, int *is_router)
+{
+	struct pneigh_entry *n;
+
+	read_lock_bh(&nd_tbl.lock);
+	n = __pneigh_lookup(&nd_tbl, &init_net, addr, dev);
+	if (n != NULL)
+		*is_router = (n->flags & NTF_ROUTER);
+	read_unlock_bh(&nd_tbl.lock);
+
+	return n;
+}
+
 static void ndisc_recv_ns(struct sk_buff *skb)
 {
 	struct nd_msg *msg = (struct nd_msg *)skb_transport_header(skb);
@@ -692,7 +706,7 @@
 	struct pneigh_entry *pneigh = NULL;
 	int dad = ipv6_addr_any(saddr);
 	int inc;
-	int is_router;
+	int is_router = 0;
 
 	if (ipv6_addr_is_multicast(&msg->target)) {
 		ND_PRINTK2(KERN_WARNING
@@ -790,8 +804,8 @@
 		if (ipv6_chk_acast_addr(dev, &msg->target) ||
 		    (idev->cnf.forwarding &&
 		     (ipv6_devconf.proxy_ndp || idev->cnf.proxy_ndp) &&
-		     (pneigh = pneigh_lookup(&nd_tbl, &init_net,
-					     &msg->target, dev, 0)) != NULL)) {
+		     (pneigh = pndisc_check_router(dev, &msg->target,
+						  &is_router)) != NULL)) {
 			if (!(NEIGH_CB(skb)->flags & LOCALLY_ENQUEUED) &&
 			    skb->pkt_type != PACKET_HOST &&
 			    inc != 0 &&
@@ -812,7 +826,7 @@
 			goto out;
 	}
 
-	is_router = !!(pneigh ? pneigh->flags & NTF_ROUTER : idev->cnf.forwarding);
+	is_router = !!(pneigh ? is_router : idev->cnf.forwarding);
 
 	if (dad) {
 		struct in6_addr maddr;
diff --git a/net/ipv6/netfilter/ip6_queue.c b/net/ipv6/netfilter/ip6_queue.c
index cc2f9af..8d366f7 100644
--- a/net/ipv6/netfilter/ip6_queue.c
+++ b/net/ipv6/netfilter/ip6_queue.c
@@ -591,11 +591,9 @@
 	}
 
 #ifdef CONFIG_PROC_FS
-	proc = create_proc_entry(IPQ_PROC_FS_NAME, 0, init_net.proc_net);
-	if (proc) {
-		proc->owner = THIS_MODULE;
-		proc->proc_fops = &ip6_queue_proc_fops;
-	} else {
+	proc = proc_create(IPQ_PROC_FS_NAME, 0, init_net.proc_net,
+			   &ip6_queue_proc_fops);
+	if (!proc) {
 		printk(KERN_ERR "ip6_queue: failed to create proc entry\n");
 		goto cleanup_ipqnl;
 	}
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index 2a0d698..24c0d03 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -171,7 +171,9 @@
 
 static void nf_ct_frag6_evictor(void)
 {
+	local_bh_disable();
 	inet_frag_evictor(&nf_init_frags, &nf_frags);
+	local_bh_enable();
 }
 
 static void nf_ct_frag6_expire(unsigned long data)
diff --git a/net/ipv6/xfrm6_mode_beet.c b/net/ipv6/xfrm6_mode_beet.c
index 0527d11..d6ce400 100644
--- a/net/ipv6/xfrm6_mode_beet.c
+++ b/net/ipv6/xfrm6_mode_beet.c
@@ -45,6 +45,7 @@
 	skb->mac_header = skb->network_header +
 			  offsetof(struct ipv6hdr, nexthdr);
 	skb->transport_header = skb->network_header + sizeof(*top_iph);
+	__skb_pull(skb, XFRM_MODE_SKB_CB(skb)->ihl);
 
 	xfrm6_beet_make_header(skb);
 
diff --git a/net/ipv6/xfrm6_mode_tunnel.c b/net/ipv6/xfrm6_mode_tunnel.c
index 0c742faa..e20529b 100644
--- a/net/ipv6/xfrm6_mode_tunnel.c
+++ b/net/ipv6/xfrm6_mode_tunnel.c
@@ -45,7 +45,7 @@
 
 	memcpy(top_iph->flow_lbl, XFRM_MODE_SKB_CB(skb)->flow_lbl,
 	       sizeof(top_iph->flow_lbl));
-	top_iph->nexthdr = x->inner_mode->afinfo->proto;
+	top_iph->nexthdr = xfrm_af2proto(skb->dst->ops->family);
 
 	dsfield = XFRM_MODE_SKB_CB(skb)->tos;
 	dsfield = INET_ECN_encapsulate(dsfield, dsfield);
diff --git a/net/ipv6/xfrm6_output.c b/net/ipv6/xfrm6_output.c
index 79ccfb0..0af823cf 100644
--- a/net/ipv6/xfrm6_output.c
+++ b/net/ipv6/xfrm6_output.c
@@ -62,7 +62,7 @@
 {
 	int err;
 
-	err = x->inner_mode->afinfo->extract_output(x, skb);
+	err = xfrm_inner_extract_output(x, skb);
 	if (err)
 		return err;
 
diff --git a/net/ipv6/xfrm6_state.c b/net/ipv6/xfrm6_state.c
index dc817e0..ff1e1db 100644
--- a/net/ipv6/xfrm6_state.c
+++ b/net/ipv6/xfrm6_state.c
@@ -174,10 +174,12 @@
 {
 	struct ipv6hdr *iph = ipv6_hdr(skb);
 
+	XFRM_MODE_SKB_CB(skb)->ihl = sizeof(*iph);
 	XFRM_MODE_SKB_CB(skb)->id = 0;
 	XFRM_MODE_SKB_CB(skb)->frag_off = htons(IP_DF);
 	XFRM_MODE_SKB_CB(skb)->tos = ipv6_get_dsfield(iph);
 	XFRM_MODE_SKB_CB(skb)->ttl = iph->hop_limit;
+	XFRM_MODE_SKB_CB(skb)->optlen = 0;
 	memcpy(XFRM_MODE_SKB_CB(skb)->flow_lbl, iph->flow_lbl,
 	       sizeof(XFRM_MODE_SKB_CB(skb)->flow_lbl));
 
diff --git a/net/irda/irnet/irnet.h b/net/irda/irnet/irnet.h
index bc2e15c..7873c392 100644
--- a/net/irda/irnet/irnet.h
+++ b/net/irda/irnet/irnet.h
@@ -405,7 +405,7 @@
   /* "pppd" interact directly with us on a /dev/ file */
   struct file *		file;		/* File descriptor of this instance */
   /* TTY stuff - to keep "pppd" happy */
-  struct termios	termios;	/* Various tty flags */
+  struct ktermios	termios;	/* Various tty flags */
   /* Stuff for the control channel */
   int			event_index;	/* Last read in the event log */
 
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 8b5f486..e9ef9af 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -1219,7 +1219,7 @@
 		x->sel.prefixlen_s = addr->sadb_address_prefixlen;
 	}
 
-	if (!x->sel.family)
+	if (x->props.mode == XFRM_MODE_TRANSPORT)
 		x->sel.family = x->props.family;
 
 	if (ext_hdrs[SADB_X_EXT_NAT_T_TYPE-1]) {
diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index 46cf962..8c50eb4 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -155,6 +155,9 @@
 	struct sock *sk;
 	int rc = -ESOCKTNOSUPPORT;
 
+	if (!capable(CAP_NET_RAW))
+		return -EPERM;
+
 	if (net != &init_net)
 		return -EAFNOSUPPORT;
 
diff --git a/net/llc/llc_c_ac.c b/net/llc/llc_c_ac.c
index 860140c..71a0022 100644
--- a/net/llc/llc_c_ac.c
+++ b/net/llc/llc_c_ac.c
@@ -198,7 +198,7 @@
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -223,7 +223,7 @@
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -249,7 +249,7 @@
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -282,7 +282,8 @@
 		llc_pdu_decode_pf_bit(skb, &f_bit);
 	else
 		f_bit = 0;
-	nskb = llc_alloc_frame(sk, llc->dev);
+	nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U,
+			       sizeof(struct llc_frmr_info));
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
 
@@ -306,7 +307,8 @@
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U,
+					       sizeof(struct llc_frmr_info));
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -336,7 +338,8 @@
 	struct llc_sock *llc = llc_sk(sk);
 
 	llc_pdu_decode_pf_bit(skb, &f_bit);
-	nskb = llc_alloc_frame(sk, llc->dev);
+	nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U,
+			       sizeof(struct llc_frmr_info));
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
 		struct llc_pdu_sn *pdu = llc_pdu_sn_hdr(skb);
@@ -424,7 +427,7 @@
 	struct llc_pdu_sn *pdu = llc_pdu_sn_hdr(skb);
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -459,7 +462,7 @@
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -483,7 +486,7 @@
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -507,7 +510,7 @@
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -531,7 +534,7 @@
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -555,7 +558,7 @@
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -579,7 +582,7 @@
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -615,7 +618,7 @@
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -639,7 +642,7 @@
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -663,7 +666,7 @@
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -688,7 +691,7 @@
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -712,7 +715,7 @@
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -736,7 +739,7 @@
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -770,7 +773,7 @@
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -799,7 +802,7 @@
 	u8 f_bit;
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
 
 	llc_pdu_decode_pf_bit(skb, &f_bit);
 	if (nskb) {
@@ -956,7 +959,7 @@
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
diff --git a/net/llc/llc_core.c b/net/llc/llc_core.c
index 248b590..50d5b10 100644
--- a/net/llc/llc_core.c
+++ b/net/llc/llc_core.c
@@ -25,8 +25,6 @@
 LIST_HEAD(llc_sap_list);
 DEFINE_RWLOCK(llc_sap_list_lock);
 
-unsigned char llc_station_mac_sa[ETH_ALEN];
-
 /**
  *	llc_sap_alloc - allocates and initializes sap.
  *
@@ -37,8 +35,8 @@
 	struct llc_sap *sap = kzalloc(sizeof(*sap), GFP_ATOMIC);
 
 	if (sap) {
+		/* sap->laddr.mac - leave as a null, it's filled by bind */
 		sap->state = LLC_SAP_STATE_ACTIVE;
-		memcpy(sap->laddr.mac, llc_station_mac_sa, ETH_ALEN);
 		rwlock_init(&sap->sk_list.lock);
 		atomic_set(&sap->refcnt, 1);
 	}
@@ -167,10 +165,6 @@
 	if (dev != NULL)
 		dev = next_net_device(dev);
 
-	if (dev != NULL)
-		memcpy(llc_station_mac_sa, dev->dev_addr, ETH_ALEN);
-	else
-		memset(llc_station_mac_sa, 0, ETH_ALEN);
 	dev_add_pack(&llc_packet_type);
 	dev_add_pack(&llc_tr_packet_type);
 	return 0;
@@ -185,7 +179,6 @@
 module_init(llc_init);
 module_exit(llc_exit);
 
-EXPORT_SYMBOL(llc_station_mac_sa);
 EXPORT_SYMBOL(llc_sap_list);
 EXPORT_SYMBOL(llc_sap_list_lock);
 EXPORT_SYMBOL(llc_sap_find);
diff --git a/net/llc/llc_input.c b/net/llc/llc_input.c
index c40c9b2..bfd2567 100644
--- a/net/llc/llc_input.c
+++ b/net/llc/llc_input.c
@@ -117,8 +117,12 @@
 	skb_pull(skb, llc_len);
 	if (skb->protocol == htons(ETH_P_802_2)) {
 		__be16 pdulen = eth_hdr(skb)->h_proto;
-		u16 data_size = ntohs(pdulen) - llc_len;
+		s32 data_size = ntohs(pdulen) - llc_len;
 
+		if (data_size < 0 ||
+		    ((skb_tail_pointer(skb) -
+		      (u8 *)pdu) - llc_len) < data_size)
+			return 0;
 		if (unlikely(pskb_trim_rcsum(skb, data_size)))
 			return 0;
 	}
diff --git a/net/llc/llc_pdu.c b/net/llc/llc_pdu.c
index fa83243..2e6cb79 100644
--- a/net/llc/llc_pdu.c
+++ b/net/llc/llc_pdu.c
@@ -241,7 +241,7 @@
 	FRMR_INFO_SET_PDU_INFO_2LONG_IND(frmr_info, vzyxw);
 	FRMR_INFO_SET_PDU_INVALID_Nr_IND(frmr_info, vzyxw);
 	FRMR_INFO_SET_PDU_INVALID_Ns_IND(frmr_info, vzyxw);
-	skb_put(skb, 5);
+	skb_put(skb, sizeof(struct llc_frmr_info));
 }
 
 /**
diff --git a/net/llc/llc_s_ac.c b/net/llc/llc_s_ac.c
index ac3d93b..a94bd56 100644
--- a/net/llc/llc_s_ac.c
+++ b/net/llc/llc_s_ac.c
@@ -103,7 +103,8 @@
 	llc_pdu_decode_sa(skb, mac_da);
 	llc_pdu_decode_da(skb, mac_sa);
 	llc_pdu_decode_ssap(skb, &dsap);
-	nskb = llc_alloc_frame(NULL, skb->dev);
+	nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U,
+			       sizeof(struct llc_xid_info));
 	if (!nskb)
 		goto out;
 	llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, sap->laddr.lsap, dsap,
@@ -144,11 +145,15 @@
 	u8 mac_da[ETH_ALEN], mac_sa[ETH_ALEN], dsap;
 	struct sk_buff *nskb;
 	int rc = 1;
+	u32 data_size;
 
 	llc_pdu_decode_sa(skb, mac_da);
 	llc_pdu_decode_da(skb, mac_sa);
 	llc_pdu_decode_ssap(skb, &dsap);
-	nskb = llc_alloc_frame(NULL, skb->dev);
+
+	/* The test request command is type U (llc_len = 3) */
+	data_size = ntohs(eth_hdr(skb)->h_proto) - 3;
+	nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U, data_size);
 	if (!nskb)
 		goto out;
 	llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, sap->laddr.lsap, dsap,
diff --git a/net/llc/llc_sap.c b/net/llc/llc_sap.c
index 2525165..e2ddde7 100644
--- a/net/llc/llc_sap.c
+++ b/net/llc/llc_sap.c
@@ -24,20 +24,41 @@
 #include <net/tcp_states.h>
 #include <linux/llc.h>
 
+static int llc_mac_header_len(unsigned short devtype)
+{
+	switch (devtype) {
+	case ARPHRD_ETHER:
+	case ARPHRD_LOOPBACK:
+		return sizeof(struct ethhdr);
+#ifdef CONFIG_TR
+	case ARPHRD_IEEE802_TR:
+		return sizeof(struct trh_hdr);
+#endif
+	}
+	return 0;
+}
+
 /**
  *	llc_alloc_frame - allocates sk_buff for frame
  *	@dev: network device this skb will be sent over
+ *	@type: pdu type to allocate
+ *	@data_size: data size to allocate
  *
  *	Allocates an sk_buff for frame and initializes sk_buff fields.
  *	Returns allocated skb or %NULL when out of memory.
  */
-struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev)
+struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev,
+				u8 type, u32 data_size)
 {
-	struct sk_buff *skb = alloc_skb(128, GFP_ATOMIC);
+	int hlen = type == LLC_PDU_TYPE_U ? 3 : 4;
+	struct sk_buff *skb;
+
+	hlen += llc_mac_header_len(dev->type);
+	skb = alloc_skb(hlen + data_size, GFP_ATOMIC);
 
 	if (skb) {
 		skb_reset_mac_header(skb);
-		skb_reserve(skb, 50);
+		skb_reserve(skb, hlen);
 		skb_reset_network_header(skb);
 		skb_reset_transport_header(skb);
 		skb->protocol = htons(ETH_P_802_2);
diff --git a/net/llc/llc_station.c b/net/llc/llc_station.c
index 6f2ea20..83da133 100644
--- a/net/llc/llc_station.c
+++ b/net/llc/llc_station.c
@@ -253,13 +253,14 @@
 static int llc_station_ac_send_null_dsap_xid_c(struct sk_buff *skb)
 {
 	int rc = 1;
-	struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev);
+	struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U,
+					       sizeof(struct llc_xid_info));
 
 	if (!nskb)
 		goto out;
 	llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, 0, LLC_PDU_CMD);
 	llc_pdu_init_as_xid_cmd(nskb, LLC_XID_NULL_CLASS_2, 127);
-	rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, llc_station_mac_sa);
+	rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, skb->dev->dev_addr);
 	if (unlikely(rc))
 		goto free;
 	llc_station_send_pdu(nskb);
@@ -274,7 +275,8 @@
 {
 	u8 mac_da[ETH_ALEN], dsap;
 	int rc = 1;
-	struct sk_buff* nskb = llc_alloc_frame(NULL, skb->dev);
+	struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U,
+					       sizeof(struct llc_xid_info));
 
 	if (!nskb)
 		goto out;
@@ -283,7 +285,7 @@
 	llc_pdu_decode_ssap(skb, &dsap);
 	llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, dsap, LLC_PDU_RSP);
 	llc_pdu_init_as_xid_rsp(nskb, LLC_XID_NULL_CLASS_2, 127);
-	rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, mac_da);
+	rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, mac_da);
 	if (unlikely(rc))
 		goto free;
 	llc_station_send_pdu(nskb);
@@ -298,7 +300,12 @@
 {
 	u8 mac_da[ETH_ALEN], dsap;
 	int rc = 1;
-	struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev);
+	u32 data_size;
+	struct sk_buff *nskb;
+
+	/* The test request command is type U (llc_len = 3) */
+	data_size = ntohs(eth_hdr(skb)->h_proto) - 3;
+	nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U, data_size);
 
 	if (!nskb)
 		goto out;
@@ -307,7 +314,7 @@
 	llc_pdu_decode_ssap(skb, &dsap);
 	llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, dsap, LLC_PDU_RSP);
 	llc_pdu_init_as_test_rsp(nskb, skb);
-	rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, mac_da);
+	rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, mac_da);
 	if (unlikely(rc))
 		goto free;
 	llc_station_send_pdu(nskb);
diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c
index 28bcdf9..8e58639 100644
--- a/net/mac80211/ieee80211.c
+++ b/net/mac80211/ieee80211.c
@@ -286,6 +286,18 @@
 	if (need_hw_reconfig)
 		ieee80211_hw_config(local);
 
+	/*
+	 * ieee80211_sta_work is disabled while network interface
+	 * is down. Therefore, some configuration changes may not
+	 * yet be effective. Trigger execution of ieee80211_sta_work
+	 * to fix this.
+	 */
+	if(sdata->vif.type == IEEE80211_IF_TYPE_STA ||
+	   sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
+		struct ieee80211_if_sta *ifsta = &sdata->u.sta;
+		queue_work(local->hw.workqueue, &ifsta->work);
+	}
+
 	netif_start_queue(dev);
 
 	return 0;
diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c
index 9aeed53..c170685 100644
--- a/net/mac80211/ieee80211_sta.c
+++ b/net/mac80211/ieee80211_sta.c
@@ -312,14 +312,12 @@
 	}
 }
 
-
-static u32 ieee80211_handle_erp_ie(struct ieee80211_sub_if_data *sdata,
-				   u8 erp_value)
+static u32 ieee80211_handle_protect_preamb(struct ieee80211_sub_if_data *sdata,
+					   bool use_protection,
+					   bool use_short_preamble)
 {
 	struct ieee80211_bss_conf *bss_conf = &sdata->bss_conf;
 	struct ieee80211_if_sta *ifsta = &sdata->u.sta;
-	bool use_protection = (erp_value & WLAN_ERP_USE_PROTECTION) != 0;
-	bool preamble_mode = (erp_value & WLAN_ERP_BARKER_PREAMBLE) != 0;
 	DECLARE_MAC_BUF(mac);
 	u32 changed = 0;
 
@@ -335,22 +333,47 @@
 		changed |= BSS_CHANGED_ERP_CTS_PROT;
 	}
 
-	if (preamble_mode != bss_conf->use_short_preamble) {
+	if (use_short_preamble != bss_conf->use_short_preamble) {
 		if (net_ratelimit()) {
 			printk(KERN_DEBUG "%s: switched to %s barker preamble"
 			       " (BSSID=%s)\n",
 			       sdata->dev->name,
-			       (preamble_mode == WLAN_ERP_PREAMBLE_SHORT) ?
-					"short" : "long",
+			       use_short_preamble ? "short" : "long",
 			       print_mac(mac, ifsta->bssid));
 		}
-		bss_conf->use_short_preamble = preamble_mode;
+		bss_conf->use_short_preamble = use_short_preamble;
 		changed |= BSS_CHANGED_ERP_PREAMBLE;
 	}
 
 	return changed;
 }
 
+static u32 ieee80211_handle_erp_ie(struct ieee80211_sub_if_data *sdata,
+				   u8 erp_value)
+{
+	bool use_protection = (erp_value & WLAN_ERP_USE_PROTECTION) != 0;
+	bool use_short_preamble = (erp_value & WLAN_ERP_BARKER_PREAMBLE) == 0;
+
+	return ieee80211_handle_protect_preamb(sdata,
+			use_protection, use_short_preamble);
+}
+
+static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
+					   struct ieee80211_sta_bss *bss)
+{
+	u32 changed = 0;
+
+	if (bss->has_erp_value)
+		changed |= ieee80211_handle_erp_ie(sdata, bss->erp_value);
+	else {
+		u16 capab = bss->capability;
+		changed |= ieee80211_handle_protect_preamb(sdata, false,
+				(capab & WLAN_CAPABILITY_SHORT_PREAMBLE) != 0);
+	}
+
+	return changed;
+}
+
 int ieee80211_ht_cap_ie_to_ht_info(struct ieee80211_ht_cap *ht_cap_ie,
 				   struct ieee80211_ht_info *ht_info)
 {
@@ -469,9 +492,7 @@
 					   local->hw.conf.channel,
 					   ifsta->ssid, ifsta->ssid_len);
 		if (bss) {
-			if (bss->has_erp_value)
-				changed |= ieee80211_handle_erp_ie(
-						sdata, bss->erp_value);
+			changed |= ieee80211_handle_bss_capability(sdata, bss);
 			ieee80211_rx_bss_put(dev, bss);
 		}
 
@@ -2117,6 +2138,11 @@
 
 	if (elems.erp_info && elems.erp_info_len >= 1)
 		changed |= ieee80211_handle_erp_ie(sdata, elems.erp_info[0]);
+	else {
+		u16 capab = le16_to_cpu(mgmt->u.beacon.capab_info);
+		changed |= ieee80211_handle_protect_preamb(sdata, false,
+				(capab & WLAN_CAPABILITY_SHORT_PREAMBLE) != 0);
+	}
 
 	if (elems.ht_cap_elem && elems.ht_info_elem &&
 	    elems.wmm_param && local->ops->conf_ht &&
diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c
index e88e96a..8599068 100644
--- a/net/netfilter/nf_conntrack_standalone.c
+++ b/net/netfilter/nf_conntrack_standalone.c
@@ -395,7 +395,7 @@
 static int __init nf_conntrack_standalone_init(void)
 {
 #ifdef CONFIG_PROC_FS
-	struct proc_dir_entry *proc, *proc_stat;
+	struct proc_dir_entry *proc;
 #endif
 	int ret = 0;
 
@@ -407,12 +407,9 @@
 	proc = proc_net_fops_create(&init_net, "nf_conntrack", 0440, &ct_file_ops);
 	if (!proc) goto cleanup_init;
 
-	proc_stat = create_proc_entry("nf_conntrack", S_IRUGO, init_net.proc_net_stat);
-	if (!proc_stat)
+	if (!proc_create("nf_conntrack", S_IRUGO,
+			 init_net.proc_net_stat, &ct_cpu_seq_fops))
 		goto cleanup_proc;
-
-	proc_stat->proc_fops = &ct_cpu_seq_fops;
-	proc_stat->owner = THIS_MODULE;
 #endif
 #ifdef CONFIG_SYSCTL
 	nf_ct_sysctl_header = register_sysctl_paths(nf_ct_path,
diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c
index cec9976..bc11d70 100644
--- a/net/netfilter/nf_log.c
+++ b/net/netfilter/nf_log.c
@@ -168,13 +168,9 @@
 int __init netfilter_log_init(void)
 {
 #ifdef CONFIG_PROC_FS
-	struct proc_dir_entry *pde;
-
-	pde = create_proc_entry("nf_log", S_IRUGO, proc_net_netfilter);
-	if (!pde)
+	if (!proc_create("nf_log", S_IRUGO,
+			 proc_net_netfilter, &nflog_file_ops))
 		return -1;
-
-	pde->proc_fops = &nflog_file_ops;
 #endif
 	return 0;
 }
diff --git a/net/netfilter/nf_queue.c b/net/netfilter/nf_queue.c
index ddc80ea..bbd2689 100644
--- a/net/netfilter/nf_queue.c
+++ b/net/netfilter/nf_queue.c
@@ -348,12 +348,9 @@
 int __init netfilter_queue_init(void)
 {
 #ifdef CONFIG_PROC_FS
-	struct proc_dir_entry *pde;
-
-	pde = create_proc_entry("nf_queue", S_IRUGO, proc_net_netfilter);
-	if (!pde)
+	if (!proc_create("nf_queue", S_IRUGO,
+			 proc_net_netfilter, &nfqueue_file_ops))
 		return -1;
-	pde->proc_fops = &nfqueue_file_ops;
 #endif
 	return 0;
 }
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index bf3f19b..b8173af 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -923,9 +923,6 @@
 static int __init nfnetlink_log_init(void)
 {
 	int i, status = -ENOMEM;
-#ifdef CONFIG_PROC_FS
-	struct proc_dir_entry *proc_nful;
-#endif
 
 	for (i = 0; i < INSTANCE_BUCKETS; i++)
 		INIT_HLIST_HEAD(&instance_table[i]);
@@ -943,11 +940,9 @@
 	}
 
 #ifdef CONFIG_PROC_FS
-	proc_nful = create_proc_entry("nfnetlink_log", 0440,
-				      proc_net_netfilter);
-	if (!proc_nful)
+	if (!proc_create("nfnetlink_log", 0440,
+			 proc_net_netfilter, &nful_file_ops))
 		goto cleanup_subsys;
-	proc_nful->proc_fops = &nful_file_ops;
 #endif
 	return status;
 
diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c
index 012cb69..10522c0 100644
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -896,9 +896,6 @@
 static int __init nfnetlink_queue_init(void)
 {
 	int i, status = -ENOMEM;
-#ifdef CONFIG_PROC_FS
-	struct proc_dir_entry *proc_nfqueue;
-#endif
 
 	for (i = 0; i < INSTANCE_BUCKETS; i++)
 		INIT_HLIST_HEAD(&instance_table[i]);
@@ -911,11 +908,9 @@
 	}
 
 #ifdef CONFIG_PROC_FS
-	proc_nfqueue = create_proc_entry("nfnetlink_queue", 0440,
-					 proc_net_netfilter);
-	if (!proc_nfqueue)
+	if (!proc_create("nfnetlink_queue", 0440,
+			 proc_net_netfilter, &nfqnl_file_ops))
 		goto cleanup_subsys;
-	proc_nfqueue->proc_fops = &nfqnl_file_ops;
 #endif
 
 	register_netdevice_notifier(&nfqnl_dev_notifier);
diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c
index 5418ce5..40d344b 100644
--- a/net/netfilter/xt_hashlimit.c
+++ b/net/netfilter/xt_hashlimit.c
@@ -237,14 +237,14 @@
 	hinfo->family = family;
 	hinfo->rnd_initialized = 0;
 	spin_lock_init(&hinfo->lock);
-	hinfo->pde = create_proc_entry(minfo->name, 0,
-				       family == AF_INET ? hashlimit_procdir4 :
-							   hashlimit_procdir6);
+	hinfo->pde = proc_create(minfo->name, 0,
+				 family == AF_INET ? hashlimit_procdir4 :
+						     hashlimit_procdir6,
+				 &dl_file_ops);
 	if (!hinfo->pde) {
 		vfree(hinfo);
 		return -1;
 	}
-	hinfo->pde->proc_fops = &dl_file_ops;
 	hinfo->pde->data = hinfo;
 
 	setup_timer(&hinfo->timer, htable_gc, (unsigned long )hinfo);
@@ -301,14 +301,14 @@
 	hinfo->rnd_initialized = 0;
 	spin_lock_init(&hinfo->lock);
 
-	hinfo->pde = create_proc_entry(minfo->name, 0,
-				       family == AF_INET ? hashlimit_procdir4 :
-							   hashlimit_procdir6);
+	hinfo->pde = proc_create(minfo->name, 0,
+				 family == AF_INET ? hashlimit_procdir4 :
+						     hashlimit_procdir6,
+				 &dl_file_ops);
 	if (hinfo->pde == NULL) {
 		vfree(hinfo);
 		return -1;
 	}
-	hinfo->pde->proc_fops = &dl_file_ops;
 	hinfo->pde->data = hinfo;
 
 	setup_timer(&hinfo->timer, htable_gc, (unsigned long)hinfo);
@@ -466,38 +466,25 @@
 
 static inline __be32 maskl(__be32 a, unsigned int l)
 {
-	return htonl(ntohl(a) & ~(~(u_int32_t)0 >> l));
+	return l ? htonl(ntohl(a) & ~0 << (32 - l)) : 0;
 }
 
 #if defined(CONFIG_IP6_NF_IPTABLES) || defined(CONFIG_IP6_NF_IPTABLES_MODULE)
 static void hashlimit_ipv6_mask(__be32 *i, unsigned int p)
 {
 	switch (p) {
-	case 0:
-		i[0] = i[1] = 0;
-		i[2] = i[3] = 0;
-		break;
-	case 1 ... 31:
+	case 0 ... 31:
 		i[0] = maskl(i[0], p);
 		i[1] = i[2] = i[3] = 0;
 		break;
-	case 32:
-		i[1] = i[2] = i[3] = 0;
-		break;
-	case 33 ... 63:
+	case 32 ... 63:
 		i[1] = maskl(i[1], p - 32);
 		i[2] = i[3] = 0;
 		break;
-	case 64:
-		i[2] = i[3] = 0;
-		break;
-	case 65 ... 95:
+	case 64 ... 95:
 		i[2] = maskl(i[2], p - 64);
 		i[3] = 0;
-	case 96:
-		i[3] = 0;
-		break;
-	case 97 ... 127:
+	case 96 ... 127:
 		i[3] = maskl(i[3], p - 96);
 		break;
 	case 128:
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index 4a31a81..063cbc5 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -598,17 +598,24 @@
 
 	if (sk == NULL) return 0;
 
+	sock_hold(sk);
+	sock_orphan(sk);
+	lock_sock(sk);
 	rose = rose_sk(sk);
 
 	switch (rose->state) {
 	case ROSE_STATE_0:
+		release_sock(sk);
 		rose_disconnect(sk, 0, -1, -1);
+		lock_sock(sk);
 		rose_destroy_socket(sk);
 		break;
 
 	case ROSE_STATE_2:
 		rose->neighbour->use--;
+		release_sock(sk);
 		rose_disconnect(sk, 0, -1, -1);
+		lock_sock(sk);
 		rose_destroy_socket(sk);
 		break;
 
@@ -633,6 +640,8 @@
 	}
 
 	sock->sk = NULL;
+	release_sock(sk);
+	sock_put(sk);
 
 	return 0;
 }
diff --git a/net/rxrpc/ar-internal.h b/net/rxrpc/ar-internal.h
index 1aaa2e8..53fe94c 100644
--- a/net/rxrpc/ar-internal.h
+++ b/net/rxrpc/ar-internal.h
@@ -23,7 +23,7 @@
 struct rxrpc_crypt {
 	union {
 		u8	x[FCRYPT_BSIZE];
-		u32	n[2];
+		__be32	n[2];
 	};
 } __attribute__((aligned(8)));
 
@@ -611,7 +611,7 @@
 extern unsigned rxrpc_debug;
 
 #define dbgprintk(FMT,...) \
-	printk("[%x%-6.6s] "FMT"\n", smp_processor_id(), current->comm ,##__VA_ARGS__)
+	printk("[%-6.6s] "FMT"\n", current->comm ,##__VA_ARGS__)
 
 /* make sure we maintain the format strings, even when debugging is disabled */
 static inline __attribute__((format(printf,1,2)))
diff --git a/net/rxrpc/rxkad.c b/net/rxrpc/rxkad.c
index f48434a..d1c296f 100644
--- a/net/rxrpc/rxkad.c
+++ b/net/rxrpc/rxkad.c
@@ -261,6 +261,7 @@
 		__be32 x[2];
 	} tmpbuf __attribute__((aligned(8))); /* must all be in same page */
 	__be32 x;
+	u32 y;
 	int ret;
 
 	sp = rxrpc_skb(skb);
@@ -292,11 +293,11 @@
 	sg_init_one(&sg[1], &tmpbuf, sizeof(tmpbuf));
 	crypto_blkcipher_encrypt_iv(&desc, &sg[0], &sg[1], sizeof(tmpbuf));
 
-	x = ntohl(tmpbuf.x[1]);
-	x = (x >> 16) & 0xffff;
-	if (x == 0)
-		x = 1; /* zero checksums are not permitted */
-	sp->hdr.cksum = htons(x);
+	y = ntohl(tmpbuf.x[1]);
+	y = (y >> 16) & 0xffff;
+	if (y == 0)
+		y = 1; /* zero checksums are not permitted */
+	sp->hdr.cksum = htons(y);
 
 	switch (call->conn->security_level) {
 	case RXRPC_SECURITY_PLAIN:
@@ -314,7 +315,7 @@
 		break;
 	}
 
-	_leave(" = %d [set %hx]", ret, x);
+	_leave(" = %d [set %hx]", ret, y);
 	return ret;
 }
 
@@ -492,6 +493,7 @@
 		__be32 x[2];
 	} tmpbuf __attribute__((aligned(8))); /* must all be in same page */
 	__be32 x;
+	u16 y;
 	__be16 cksum;
 	int ret;
 
@@ -526,12 +528,12 @@
 	sg_init_one(&sg[1], &tmpbuf, sizeof(tmpbuf));
 	crypto_blkcipher_encrypt_iv(&desc, &sg[0], &sg[1], sizeof(tmpbuf));
 
-	x = ntohl(tmpbuf.x[1]);
-	x = (x >> 16) & 0xffff;
-	if (x == 0)
-		x = 1; /* zero checksums are not permitted */
+	y = ntohl(tmpbuf.x[1]);
+	y = (y >> 16) & 0xffff;
+	if (y == 0)
+		y = 1; /* zero checksums are not permitted */
 
-	cksum = htons(x);
+	cksum = htons(y);
 	if (sp->hdr.cksum != cksum) {
 		*_abort_code = RXKADSEALEDINCON;
 		_leave(" = -EPROTO [csum failed]");
@@ -1001,7 +1003,8 @@
 	struct rxrpc_crypt session_key;
 	time_t expiry;
 	void *ticket;
-	u32 abort_code, version, kvno, ticket_len, csum, level;
+	u32 abort_code, version, kvno, ticket_len, level;
+	__be32 csum;
 	int ret;
 
 	_enter("{%d,%x}", conn->debug_id, key_serial(conn->server_key));
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 10b5c08..b741618 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -184,10 +184,22 @@
 
 void __qdisc_run(struct net_device *dev)
 {
-	do {
-		if (!qdisc_restart(dev))
+	unsigned long start_time = jiffies;
+
+	while (qdisc_restart(dev)) {
+		if (netif_queue_stopped(dev))
 			break;
-	} while (!netif_queue_stopped(dev));
+
+		/*
+		 * Postpone processing if
+		 * 1. another process needs the CPU;
+		 * 2. we've been doing it for too long.
+		 */
+		if (need_resched() || jiffies != start_time) {
+			netif_schedule(dev);
+			break;
+		}
+	}
 
 	clear_bit(__LINK_STATE_QDISC_RUNNING, &dev->state);
 }
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 8c6a7f1..8834d68 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -261,10 +261,6 @@
 	};
 	char servername[48];
 
-	xprt = xprt_create_transport(&xprtargs);
-	if (IS_ERR(xprt))
-		return (struct rpc_clnt *)xprt;
-
 	/*
 	 * If the caller chooses not to specify a hostname, whip
 	 * up a string representation of the passed-in address.
diff --git a/net/sunrpc/xdr.c b/net/sunrpc/xdr.c
index 995c3fd..79a55d5 100644
--- a/net/sunrpc/xdr.c
+++ b/net/sunrpc/xdr.c
@@ -244,7 +244,7 @@
 	pgto = pages + (pgbase >> PAGE_CACHE_SHIFT);
 	pgbase &= ~PAGE_CACHE_MASK;
 
-	do {
+	for (;;) {
 		copy = PAGE_CACHE_SIZE - pgbase;
 		if (copy > len)
 			copy = len;
@@ -253,6 +253,10 @@
 		memcpy(vto + pgbase, p, copy);
 		kunmap_atomic(vto, KM_USER0);
 
+		len -= copy;
+		if (len == 0)
+			break;
+
 		pgbase += copy;
 		if (pgbase == PAGE_CACHE_SIZE) {
 			flush_dcache_page(*pgto);
@@ -260,8 +264,7 @@
 			pgto++;
 		}
 		p += copy;
-
-	} while ((len -= copy) != 0);
+	}
 	flush_dcache_page(*pgto);
 }
 
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index e3a214f..f68a5c8 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -945,7 +945,7 @@
 		nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES]);
 	params.listen_interval =
 		nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]);
-	params.listen_interval = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
+	params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
 
 	if (parse_station_flags(info->attrs[NL80211_ATTR_STA_FLAGS],
 				&params.station_flags))
diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c
index 62188c6..7527940 100644
--- a/net/xfrm/xfrm_input.c
+++ b/net/xfrm/xfrm_input.c
@@ -84,14 +84,21 @@
 
 int xfrm_prepare_input(struct xfrm_state *x, struct sk_buff *skb)
 {
+	struct xfrm_mode *inner_mode = x->inner_mode;
 	int err;
 
 	err = x->outer_mode->afinfo->extract_input(x, skb);
 	if (err)
 		return err;
 
-	skb->protocol = x->inner_mode->afinfo->eth_proto;
-	return x->inner_mode->input2(x, skb);
+	if (x->sel.family == AF_UNSPEC) {
+		inner_mode = xfrm_ip2inner_mode(x, XFRM_MODE_SKB_CB(skb)->protocol);
+		if (inner_mode == NULL)
+			return -EAFNOSUPPORT;
+	}
+
+	skb->protocol = inner_mode->afinfo->eth_proto;
+	return inner_mode->input2(x, skb);
 }
 EXPORT_SYMBOL(xfrm_prepare_input);
 
@@ -101,6 +108,7 @@
 	__be32 seq;
 	struct xfrm_state *x;
 	xfrm_address_t *daddr;
+	struct xfrm_mode *inner_mode;
 	unsigned int family;
 	int decaps = 0;
 	int async = 0;
@@ -207,7 +215,15 @@
 
 		XFRM_MODE_SKB_CB(skb)->protocol = nexthdr;
 
-		if (x->inner_mode->input(x, skb)) {
+		inner_mode = x->inner_mode;
+
+		if (x->sel.family == AF_UNSPEC) {
+			inner_mode = xfrm_ip2inner_mode(x, XFRM_MODE_SKB_CB(skb)->protocol);
+			if (inner_mode == NULL)
+				goto drop;
+		}
+
+		if (inner_mode->input(x, skb)) {
 			XFRM_INC_STATS(LINUX_MIB_XFRMINSTATEMODEERROR);
 			goto drop;
 		}
diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c
index 569d377..2519129 100644
--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -124,7 +124,7 @@
 		if (!x)
 			return dst_output(skb);
 
-		err = nf_hook(x->inner_mode->afinfo->family,
+		err = nf_hook(skb->dst->ops->family,
 			      NF_INET_POST_ROUTING, skb,
 			      NULL, skb->dst->dev, xfrm_output2);
 		if (unlikely(err != 1))
@@ -193,4 +193,20 @@
 
 	return xfrm_output2(skb);
 }
+
+int xfrm_inner_extract_output(struct xfrm_state *x, struct sk_buff *skb)
+{
+	struct xfrm_mode *inner_mode;
+	if (x->sel.family == AF_UNSPEC)
+		inner_mode = xfrm_ip2inner_mode(x,
+				xfrm_af2proto(skb->dst->ops->family));
+	else
+		inner_mode = x->inner_mode;
+
+	if (inner_mode == NULL)
+		return -EAFNOSUPPORT;
+	return inner_mode->afinfo->extract_output(x, skb);
+}
+
 EXPORT_SYMBOL_GPL(xfrm_output);
+EXPORT_SYMBOL_GPL(xfrm_inner_extract_output);
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index 7ba65e8..58f1f93 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -388,6 +388,8 @@
 	kfree(x->coaddr);
 	if (x->inner_mode)
 		xfrm_put_mode(x->inner_mode);
+	if (x->inner_mode_iaf)
+		xfrm_put_mode(x->inner_mode_iaf);
 	if (x->outer_mode)
 		xfrm_put_mode(x->outer_mode);
 	if (x->type) {
@@ -523,6 +525,8 @@
 		x->lft.hard_packet_limit = XFRM_INF;
 		x->replay_maxage = 0;
 		x->replay_maxdiff = 0;
+		x->inner_mode = NULL;
+		x->inner_mode_iaf = NULL;
 		spin_lock_init(&x->lock);
 	}
 	return x;
@@ -796,7 +800,7 @@
 			      selector.
 			 */
 			if (x->km.state == XFRM_STATE_VALID) {
-				if (!xfrm_selector_match(&x->sel, fl, x->sel.family) ||
+				if ((x->sel.family && !xfrm_selector_match(&x->sel, fl, x->sel.family)) ||
 				    !security_xfrm_state_pol_flow_match(x, pol, fl))
 					continue;
 				if (!best ||
@@ -1944,6 +1948,7 @@
 int xfrm_init_state(struct xfrm_state *x)
 {
 	struct xfrm_state_afinfo *afinfo;
+	struct xfrm_mode *inner_mode;
 	int family = x->props.family;
 	int err;
 
@@ -1962,13 +1967,48 @@
 		goto error;
 
 	err = -EPROTONOSUPPORT;
-	x->inner_mode = xfrm_get_mode(x->props.mode, x->sel.family);
-	if (x->inner_mode == NULL)
-		goto error;
 
-	if (!(x->inner_mode->flags & XFRM_MODE_FLAG_TUNNEL) &&
-	    family != x->sel.family)
-		goto error;
+	if (x->sel.family != AF_UNSPEC) {
+		inner_mode = xfrm_get_mode(x->props.mode, x->sel.family);
+		if (inner_mode == NULL)
+			goto error;
+
+		if (!(inner_mode->flags & XFRM_MODE_FLAG_TUNNEL) &&
+		    family != x->sel.family) {
+			xfrm_put_mode(inner_mode);
+			goto error;
+		}
+
+		x->inner_mode = inner_mode;
+	} else {
+		struct xfrm_mode *inner_mode_iaf;
+
+		inner_mode = xfrm_get_mode(x->props.mode, AF_INET);
+		if (inner_mode == NULL)
+			goto error;
+
+		if (!(inner_mode->flags & XFRM_MODE_FLAG_TUNNEL)) {
+			xfrm_put_mode(inner_mode);
+			goto error;
+		}
+
+		inner_mode_iaf = xfrm_get_mode(x->props.mode, AF_INET6);
+		if (inner_mode_iaf == NULL)
+			goto error;
+
+		if (!(inner_mode_iaf->flags & XFRM_MODE_FLAG_TUNNEL)) {
+			xfrm_put_mode(inner_mode_iaf);
+			goto error;
+		}
+
+		if (x->props.family == AF_INET) {
+			x->inner_mode = inner_mode;
+			x->inner_mode_iaf = inner_mode_iaf;
+		} else {
+			x->inner_mode = inner_mode_iaf;
+			x->inner_mode_iaf = inner_mode;
+		}
+	}
 
 	x->type = xfrm_get_type(x->id.proto, family);
 	if (x->type == NULL)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index f971ca5..019d21d 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -288,12 +288,9 @@
 	memcpy(&x->props.saddr, &p->saddr, sizeof(x->props.saddr));
 	x->props.flags = p->flags;
 
-	/*
-	 * Set inner address family if the KM left it as zero.
-	 * See comment in validate_tmpl.
-	 */
 	if (!x->sel.family)
 		x->sel.family = p->family;
+
 }
 
 /*
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 2a7cef9..58a9494 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -9,7 +9,7 @@
 my $P = $0;
 $P =~ s@.*/@@g;
 
-my $V = '0.15';
+my $V = '0.16';
 
 use Getopt::Long qw(:config no_auto_abbrev);
 
@@ -18,6 +18,7 @@
 my $chk_signoff = 1;
 my $chk_patch = 1;
 my $tst_type = 0;
+my $tst_only;
 my $emacs = 0;
 my $terse = 0;
 my $file = 0;
@@ -44,6 +45,7 @@
 
 	'debug=s'	=> \%debug,
 	'test-type!'	=> \$tst_type,
+	'test-only=s'	=> \$tst_only,
 ) or exit;
 
 my $exit = 0;
@@ -263,17 +265,7 @@
 	return $res;
 }
 sub copy_spacing {
-	my ($str) = @_;
-
-	my $res = '';
-	for my $c (split(//, $str)) {
-		if ($c eq "\t") {
-			$res .= $c;
-		} else {
-			$res .= ' ';
-		}
-	}
-
+	(my $res = shift) =~ tr/\t/ /c;
 	return $res;
 }
 
@@ -290,53 +282,76 @@
 	return (length($line), length($white));
 }
 
+my $sanitise_quote = '';
+
+sub sanitise_line_reset {
+	my ($in_comment) = @_;
+
+	if ($in_comment) {
+		$sanitise_quote = '*/';
+	} else {
+		$sanitise_quote = '';
+	}
+}
 sub sanitise_line {
 	my ($line) = @_;
 
 	my $res = '';
 	my $l = '';
 
-	my $quote = '';
 	my $qlen = 0;
+	my $off = 0;
+	my $c;
 
-	foreach my $c (split(//, $line)) {
-		# The second backslash of a pair is not a "quote".
-		if ($l eq "\\" && $c eq "\\") {
-			$c = 'X';
+	# Always copy over the diff marker.
+	$res = substr($line, 0, 1);
+
+	for ($off = 1; $off < length($line); $off++) {
+		$c = substr($line, $off, 1);
+
+		# Comments we are wacking completly including the begin
+		# and end, all to $;.
+		if ($sanitise_quote eq '' && substr($line, $off, 2) eq '/*') {
+			$sanitise_quote = '*/';
+
+			substr($res, $off, 2, "$;$;");
+			$off++;
+			next;
 		}
-		if ($l ne "\\" && ($c eq "'" || $c eq '"')) {
-			if ($quote eq '') {
-				$quote = $c;
-				$res .= $c;
-				$l = $c;
-				$qlen = 0;
+		if (substr($line, $off, 2) eq $sanitise_quote) {
+			$sanitise_quote = '';
+			substr($res, $off, 2, "$;$;");
+			$off++;
+			next;
+		}
+
+		# A \ in a string means ignore the next character.
+		if (($sanitise_quote eq "'" || $sanitise_quote eq '"') &&
+		    $c eq "\\") {
+			substr($res, $off, 2, 'XX');
+			$off++;
+			next;
+		}
+		# Regular quotes.
+		if ($c eq "'" || $c eq '"') {
+			if ($sanitise_quote eq '') {
+				$sanitise_quote = $c;
+
+				substr($res, $off, 1, $c);
 				next;
-			} elsif ($quote eq $c) {
-				$quote = '';
+			} elsif ($sanitise_quote eq $c) {
+				$sanitise_quote = '';
 			}
 		}
-		if ($quote eq "'" && $qlen > 1) {
-			$quote = '';
-		}
-		if ($quote && $c ne "\t") {
-			$res .= "X";
-			$qlen++;
+
+		#print "SQ:$sanitise_quote\n";
+		if ($off != 0 && $sanitise_quote eq '*/' && $c ne "\t") {
+			substr($res, $off, 1, $;);
+		} elsif ($off != 0 && $sanitise_quote && $c ne "\t") {
+			substr($res, $off, 1, 'X');
 		} else {
-			$res .= $c;
+			substr($res, $off, 1, $c);
 		}
-
-		$l = $c;
-	}
-
-	# Clear out the comments.
-	while ($res =~ m@(/\*.*?\*/)@g) {
-		substr($res, $-[1], $+[1] - $-[1]) = $; x ($+[1] - $-[1]);
-	}
-	if ($res =~ m@(/\*.*)@) {
-		substr($res, $-[1], $+[1] - $-[1]) = $; x ($+[1] - $-[1]);
-	}
-	if ($res =~ m@^.(.*\*/)@) {
-		substr($res, $-[1], $+[1] - $-[1]) = $; x ($+[1] - $-[1]);
 	}
 
 	# The pathname on a #include may be surrounded by '<' and '>'.
@@ -359,6 +374,7 @@
 	my $blk = '';
 	my $soff = $off;
 	my $coff = $off - 1;
+	my $coff_set = 0;
 
 	my $loff = 0;
 
@@ -370,7 +386,7 @@
 
 	my $remainder;
 	while (1) {
-		#warn "CSB: blk<$blk>\n";
+		#warn "CSB: blk<$blk> remain<$remain>\n";
 		# If we are about to drop off the end, pull in more
 		# context.
 		if ($off >= $len) {
@@ -393,7 +409,7 @@
 		$c = substr($blk, $off, 1);
 		$remainder = substr($blk, $off);
 
-		#warn "CSB: c<$c> type<$type> level<$level>\n";
+		#warn "CSB: c<$c> type<$type> level<$level> remainder<$remainder> coff_set<$coff_set>\n";
 		# Statement ends at the ';' or a close '}' at the
 		# outermost level.
 		if ($level == 0 && $c eq ';') {
@@ -401,10 +417,14 @@
 		}
 
 		# An else is really a conditional as long as its not else if
-		if ($level == 0 && (!defined($p) || $p =~ /(?:\s|\})/) &&
-				$remainder =~ /(else)(?:\s|{)/ &&
-				$remainder !~ /else\s+if\b/) {
-			$coff = $off + length($1);
+		if ($level == 0 && $coff_set == 0 &&
+				(!defined($p) || $p =~ /(?:\s|\}|\+)/) &&
+				$remainder =~ /^(else)(?:\s|{)/ &&
+				$remainder !~ /^else\s+if\b/) {
+			$coff = $off + length($1) - 1;
+			$coff_set = 1;
+			#warn "CSB: mark coff<$coff> soff<$soff> 1<$1>\n";
+			#warn "[" . substr($blk, $soff, $coff - $soff + 1) . "]\n";
 		}
 
 		if (($type eq '' || $type eq '(') && $c eq '(') {
@@ -417,6 +437,8 @@
 
 			if ($level == 0 && $coff < $soff) {
 				$coff = $off;
+				$coff_set = 1;
+				#warn "CSB: mark coff<$coff>\n";
 			}
 		}
 		if (($type eq '' || $type eq '{') && $c eq '{') {
@@ -444,7 +466,7 @@
 	#warn "STATEMENT<$statement>\n";
 	#warn "CONDITION<$condition>\n";
 
-	#print "off<$off> loff<$loff>\n";
+	#print "coff<$coff> soff<$off> loff<$loff>\n";
 
 	return ($statement, $condition,
 			$line, $remain + 1, $off - $loff + 1, $level);
@@ -502,7 +524,7 @@
 	# Grab the first conditional/block pair.
 	($statement, $condition, $linenr, $remain, $off, $level) =
 				ctx_statement_block($linenr, $remain, $off);
-	#print "F: c<$condition> s<$statement>\n";
+	#print "F: c<$condition> s<$statement> remain<$remain>\n";
 	push(@chunks, [ $condition, $statement ]);
 	if (!($remain > 0 && $condition =~ /^\s*(?:\n[+-])?\s*(?:if|else|do)\b/s)) {
 		return ($level, $linenr, @chunks);
@@ -514,7 +536,7 @@
 		($statement, $condition, $linenr, $remain, $off, $level) =
 				ctx_statement_block($linenr, $remain, $off);
 		#print "C: c<$condition> s<$statement> remain<$remain>\n";
-		last if (!($remain > 0 && $condition =~ /^\s*(?:\n[+-])?\s*(?:else|do)\b/s));
+		last if (!($remain > 0 && $condition =~ /^(?:\s*\n[+-])*\s*(?:else|do)\b/s));
 		#print "C: push\n";
 		push(@chunks, [ $condition, $statement ]);
 	}
@@ -668,6 +690,7 @@
 	print "$stream\n" if ($dbg_values > 1);
 
 	while (length($cur)) {
+		@av_paren_type = ('E') if ($#av_paren_type < 0);
 		print " <" . join('', @av_paren_type) .
 					"> <$type> " if ($dbg_values > 1);
 		if ($cur =~ /^(\s+)/o) {
@@ -804,28 +827,34 @@
 my $prefix = '';
 
 sub report {
+	if (defined $tst_only && $_[0] !~ /\Q$tst_only\E/) {
+		return 0;
+	}
 	my $line = $prefix . $_[0];
 
 	$line = (split('\n', $line))[0] . "\n" if ($terse);
 
 	push(our @report, $line);
+
+	return 1;
 }
 sub report_dump {
 	our @report;
 }
 sub ERROR {
-	report("ERROR: $_[0]\n");
-	our $clean = 0;
-	our $cnt_error++;
+	if (report("ERROR: $_[0]\n")) {
+		our $clean = 0;
+		our $cnt_error++;
+	}
 }
 sub WARN {
-	report("WARNING: $_[0]\n");
-	our $clean = 0;
-	our $cnt_warn++;
+	if (report("WARNING: $_[0]\n")) {
+		our $clean = 0;
+		our $cnt_warn++;
+	}
 }
 sub CHK {
-	if ($check) {
-		report("CHECK: $_[0]\n");
+	if ($check && report("CHECK: $_[0]\n")) {
 		our $clean = 0;
 		our $cnt_chk++;
 	}
@@ -867,30 +896,76 @@
 	my $prev_values = 'E';
 
 	# suppression flags
-	my $suppress_ifbraces = 0;
+	my %suppress_ifbraces;
 
 	# Pre-scan the patch sanitizing the lines.
 	# Pre-scan the patch looking for any __setup documentation.
 	#
 	my @setup_docs = ();
 	my $setup_docs = 0;
+
+	sanitise_line_reset();
 	my $line;
 	foreach my $rawline (@rawlines) {
-		# Standardise the strings and chars within the input to
-		# simplify matching.
-		$line = sanitise_line($rawline);
-		push(@lines, $line);
+		$linenr++;
+		$line = $rawline;
 
-		##print "==>$rawline\n";
-		##print "-->$line\n";
-
-		if ($line=~/^\+\+\+\s+(\S+)/) {
+		if ($rawline=~/^\+\+\+\s+(\S+)/) {
 			$setup_docs = 0;
 			if ($1 =~ m@Documentation/kernel-parameters.txt$@) {
 				$setup_docs = 1;
 			}
-			next;
+			#next;
 		}
+		if ($rawline=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) {
+			$realline=$1-1;
+			if (defined $2) {
+				$realcnt=$3+1;
+			} else {
+				$realcnt=1+1;
+			}
+
+			# Guestimate if this is a continuing comment.  Run
+			# the context looking for a comment "edge".  If this
+			# edge is a close comment then we must be in a comment
+			# at context start.
+			my $edge;
+			for (my $ln = $linenr; $ln < ($linenr + $realcnt); $ln++) {
+				next if ($line =~ /^-/);
+				($edge) = ($rawlines[$ln - 1] =~ m@(/\*|\*/)@);
+				last if (defined $edge);
+			}
+			if (defined $edge && $edge eq '*/') {
+				$in_comment = 1;
+			}
+
+			# Guestimate if this is a continuing comment.  If this
+			# is the start of a diff block and this line starts
+			# ' *' then it is very likely a comment.
+			if (!defined $edge &&
+			    $rawlines[$linenr] =~ m@^.\s* \*(?:\s|$)@)
+			{
+				$in_comment = 1;
+			}
+
+			##print "COMMENT:$in_comment edge<$edge> $rawline\n";
+			sanitise_line_reset($in_comment);
+
+		} elsif ($realcnt) {
+			# Standardise the strings and chars within the input to
+			# simplify matching.
+			$line = sanitise_line($rawline);
+		}
+		push(@lines, $line);
+
+		if ($realcnt > 1) {
+			$realcnt-- if ($line =~ /^(?:\+| |$)/);
+		} else {
+			$realcnt = 0;
+		}
+
+		#print "==>$rawline\n";
+		#print "-->$line\n";
 
 		if ($setup_docs && $line =~ /^\+/) {
 			push(@setup_docs, $line);
@@ -899,23 +974,17 @@
 
 	$prefix = '';
 
+	$realcnt = 0;
+	$linenr = 0;
 	foreach my $line (@lines) {
 		$linenr++;
 
 		my $rawline = $rawlines[$linenr - 1];
 
-#extract the filename as it passes
-		if ($line=~/^\+\+\+\s+(\S+)/) {
-			$realfile=$1;
-			$realfile =~ s@^[^/]*/@@;
-			$in_comment = 0;
-			next;
-		}
 #extract the line range in the file after the patch is applied
 		if ($line=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) {
 			$is_patch = 1;
 			$first_line = $linenr + 1;
-			$in_comment = 0;
 			$realline=$1-1;
 			if (defined $2) {
 				$realcnt=$3+1;
@@ -925,50 +994,16 @@
 			annotate_reset();
 			$prev_values = 'E';
 
-			$suppress_ifbraces = $linenr - 1;
+			%suppress_ifbraces = ();
 			next;
-		}
 
 # track the line number as we move through the hunk, note that
 # new versions of GNU diff omit the leading space on completely
 # blank context lines so we need to count that too.
-		if ($line =~ /^( |\+|$)/) {
+		} elsif ($line =~ /^( |\+|$)/) {
 			$realline++;
 			$realcnt-- if ($realcnt != 0);
 
-			# Guestimate if this is a continuing comment.  Run
-			# the context looking for a comment "edge".  If this
-			# edge is a close comment then we must be in a comment
-			# at context start.
-			if ($linenr == $first_line) {
-				my $edge;
-				for (my $ln = $first_line; $ln < ($linenr + $realcnt); $ln++) {
-					($edge) = ($rawlines[$ln - 1] =~ m@(/\*|\*/)@);
-					last if (defined $edge);
-				}
-				if (defined $edge && $edge eq '*/') {
-					$in_comment = 1;
-				}
-			}
-
-			# Guestimate if this is a continuing comment.  If this
-			# is the start of a diff block and this line starts
-			# ' *' then it is very likely a comment.
-			if ($linenr == $first_line and $rawline =~ m@^.\s* \*(?:\s|$)@) {
-				$in_comment = 1;
-			}
-
-			# Find the last comment edge on _this_ line.
-			$comment_edge = 0;
-			while (($rawline =~ m@(/\*|\*/)@g)) {
-				if ($1 eq '/*') {
-					$in_comment = 1;
-				} else {
-					$in_comment = 0;
-				}
-				$comment_edge = 1;
-			}
-
 			# Measure the line length and indent.
 			($length, $indent) = line_stats($rawline);
 
@@ -977,23 +1012,36 @@
 			($previndent, $stashindent) = ($stashindent, $indent);
 			($prevrawline, $stashrawline) = ($stashrawline, $rawline);
 
-			#warn "ic<$in_comment> ce<$comment_edge> line<$line>\n";
+			#warn "line<$line>\n";
 
 		} elsif ($realcnt == 1) {
 			$realcnt--;
 		}
 
 #make up the handle for any error we report on this line
+		$prefix = "$filename:$realline: " if ($emacs && $file);
+		$prefix = "$filename:$linenr: " if ($emacs && !$file);
+
 		$here = "#$linenr: " if (!$file);
 		$here = "#$realline: " if ($file);
+
+		# extract the filename as it passes
+		if ($line=~/^\+\+\+\s+(\S+)/) {
+			$realfile = $1;
+			$realfile =~ s@^[^/]*/@@;
+
+			if ($realfile =~ m@include/asm/@) {
+				ERROR("do not modify files in include/asm, change architecture specific files in include/asm-<architecture>\n" . "$here$rawline\n");
+			}
+			next;
+		}
+
 		$here .= "FILE: $realfile:$realline:" if ($realcnt != 0);
 
 		my $hereline = "$here\n$rawline\n";
 		my $herecurr = "$here\n$rawline\n";
 		my $hereprev = "$here\n$prevrawline\n$rawline\n";
 
-		$prefix = "$filename:$realline: " if ($emacs && $file);
-		$prefix = "$filename:$linenr: " if ($emacs && !$file);
 		$cnt_lines++ if ($realcnt != 0);
 
 #check the patch for a signoff:
@@ -1005,7 +1053,7 @@
 					$herecurr);
 			}
 			if ($line =~ /^\s*signed-off-by:\S/i) {
-				WARN("need space after Signed-off-by:\n" .
+				WARN("space required after Signed-off-by:\n" .
 					$herecurr);
 			}
 		}
@@ -1072,11 +1120,6 @@
 			WARN("CVS style keyword markers, these will _not_ be updated\n". $herecurr);
 		}
 
-# The rest of our checks refer specifically to C style
-# only apply those _outside_ comments.  Only skip
-# lines in the middle of comments.
-		next if (!$comment_edge && $in_comment);
-
 # Check for potential 'bare' types
 		if ($realcnt) {
 			my ($s, $c) = ctx_statement_block($linenr, $realcnt, 0);
@@ -1110,7 +1153,7 @@
 				my ($name_len) = length($1);
 
 				my $ctx = $s;
-				substr($ctx, 0, $name_len + 1) = '';
+				substr($ctx, 0, $name_len + 1, '');
 				$ctx =~ s/\)[^\)]*$//;
 
 				for my $arg (split(/\s*,\s*/, $ctx)) {
@@ -1151,27 +1194,33 @@
 
 # if/while/etc brace do not go on next line, unless defining a do while loop,
 # or if that brace on the next line is for something else
-		if ($line =~ /\b(?:(if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.#/) {
+		if ($line =~ /(.*)\b((?:if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.#/) {
+			my $pre_ctx = "$1$2";
+
 			my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, 0);
 			my $ctx_ln = $linenr + $#ctx + 1;
 			my $ctx_cnt = $realcnt - $#ctx - 1;
 			my $ctx = join("\n", @ctx);
 
-			# Skip over any removed lines in the context following statement.
-			while ($ctx_cnt > 0 && $lines[$ctx_ln - 1] =~ /^-/) {
-				$ctx_ln++;
-				$ctx_cnt--;
-			}
-			##warn "line<$line>\nctx<$ctx>\nnext<$lines[$ctx_ln - 1]>";
+			##warn "realcnt<$realcnt> ctx_cnt<$ctx_cnt>\n";
 
-			if ($ctx !~ /{\s*/ && $ctx_cnt > 0 && $lines[$ctx_ln - 1] =~ /^\+\s*{/) {
-				ERROR("That open brace { should be on the previous line\n" .
+			# Skip over any removed lines in the context following statement.
+			while (defined($lines[$ctx_ln - 1]) && $lines[$ctx_ln - 1] =~ /^-/) {
+				$ctx_ln++;
+			}
+			##warn "pre<$pre_ctx>\nline<$line>\nctx<$ctx>\nnext<$lines[$ctx_ln - 1]>\n";
+
+			if ($ctx !~ /{\s*/ && defined($lines[$ctx_ln -1]) && $lines[$ctx_ln - 1] =~ /^\+\s*{/) {
+				ERROR("that open brace { should be on the previous line\n" .
 					"$here\n$ctx\n$lines[$ctx_ln - 1]");
 			}
-			if ($level == 0 && $ctx =~ /\)\s*\;\s*$/ && defined $lines[$ctx_ln - 1]) {
+			if ($level == 0 && $pre_ctx !~ /}\s*while\s*\($/ &&
+			    $ctx =~ /\)\s*\;\s*$/ &&
+			    defined $lines[$ctx_ln - 1])
+			{
 				my ($nlength, $nindent) = line_stats($lines[$ctx_ln - 1]);
 				if ($nindent > $indent) {
-					WARN("Trailing semicolon indicates no statements, indent implies otherwise\n" .
+					WARN("trailing semicolon indicates no statements, indent implies otherwise\n" .
 						"$here\n$ctx\n$lines[$ctx_ln - 1]");
 				}
 			}
@@ -1200,7 +1249,7 @@
 # check for initialisation to aggregates open brace on the next line
 		if ($prevline =~ /$Declare\s*$Ident\s*=\s*$/ &&
 		    $line =~ /^.\s*{/) {
-			ERROR("That open brace { should be on the previous line\n" . $hereprev);
+			ERROR("that open brace { should be on the previous line\n" . $hereprev);
 		}
 
 #
@@ -1325,22 +1374,31 @@
 # check for spaces between functions and their parentheses.
 		while ($line =~ /($Ident)\s+\(/g) {
 			my $name = $1;
-			my $ctx = substr($line, 0, $-[1]);
+			my $ctx_before = substr($line, 0, $-[1]);
+			my $ctx = "$ctx_before$name";
 
 			# Ignore those directives where spaces _are_ permitted.
-			if ($name =~ /^(?:if|for|while|switch|return|volatile|__volatile__|__attribute__|format|__extension__|Copyright|case|__asm__)$/) {
+			if ($name =~ /^(?:
+				if|for|while|switch|return|case|
+				volatile|__volatile__|
+				__attribute__|format|__extension__|
+				asm|__asm__)$/x)
+			{
 
 			# cpp #define statements have non-optional spaces, ie
 			# if there is a space between the name and the open
 			# parenthesis it is simply not a parameter group.
-			} elsif ($ctx =~ /^.\#\s*define\s*$/) {
+			} elsif ($ctx_before =~ /^.\#\s*define\s*$/) {
+
+			# cpp #elif statement condition may start with a (
+			} elsif ($ctx =~ /^.\#\s*elif\s*$/) {
 
 			# If this whole things ends with a type its most
 			# likely a typedef for a function.
-			} elsif ("$ctx$name" =~ /$Type$/) {
+			} elsif ($ctx =~ /$Type$/) {
 
 			} else {
-				WARN("no space between function name and open parenthesis '('\n" . $herecurr);
+				WARN("space prohibited between function name and open parenthesis '('\n" . $herecurr);
 			}
 		}
 # Check operator spacing.
@@ -1359,13 +1417,21 @@
 			for (my $n = 0; $n < $#elements; $n += 2) {
 				$off += length($elements[$n]);
 
+				# Pick up the preceeding and succeeding characters.
+				my $ca = substr($opline, 0, $off);
+				my $cc = '';
+				if (length($opline) >= ($off + length($elements[$n + 1]))) {
+					$cc = substr($opline, $off + length($elements[$n + 1]));
+				}
+				my $cb = "$ca$;$cc";
+
 				my $a = '';
 				$a = 'V' if ($elements[$n] ne '');
 				$a = 'W' if ($elements[$n] =~ /\s$/);
 				$a = 'C' if ($elements[$n] =~ /$;$/);
 				$a = 'B' if ($elements[$n] =~ /(\[|\()$/);
 				$a = 'O' if ($elements[$n] eq '');
-				$a = 'E' if ($elements[$n] eq '' && $n == 0);
+				$a = 'E' if ($ca =~ /^\s*$/);
 
 				my $op = $elements[$n + 1];
 
@@ -1381,14 +1447,6 @@
 					$c = 'E';
 				}
 
-				# Pick up the preceeding and succeeding characters.
-				my $ca = substr($opline, 0, $off);
-				my $cc = '';
-				if (length($opline) >= ($off + length($elements[$n + 1]))) {
-					$cc = substr($opline, $off + length($elements[$n + 1]));
-				}
-				my $cb = "$ca$;$cc";
-
 				my $ctx = "${a}x${c}";
 
 				my $at = "(ctx:$ctx)";
@@ -1424,7 +1482,7 @@
 				} elsif ($op eq ';') {
 					if ($ctx !~ /.x[WEBC]/ &&
 					    $cc !~ /^\\/ && $cc !~ /^;/) {
-						ERROR("need space after that '$op' $at\n" . $hereptr);
+						ERROR("space required after that '$op' $at\n" . $hereptr);
 					}
 
 				# // is a comment
@@ -1433,13 +1491,13 @@
 				# -> should have no spaces
 				} elsif ($op eq '->') {
 					if ($ctx =~ /Wx.|.xW/) {
-						ERROR("no spaces around that '$op' $at\n" . $hereptr);
+						ERROR("spaces prohibited around that '$op' $at\n" . $hereptr);
 					}
 
 				# , must have a space on the right.
 				} elsif ($op eq ',') {
 					if ($ctx !~ /.x[WEC]/ && $cc !~ /^}/) {
-						ERROR("need space after that '$op' $at\n" . $hereptr);
+						ERROR("space required after that '$op' $at\n" . $hereptr);
 					}
 
 				# '*' as part of a type definition -- reported already.
@@ -1452,20 +1510,25 @@
 				} elsif ($op eq '!' || $op eq '~' ||
 				         ($is_unary && ($op eq '*' || $op eq '-' || $op eq '&'))) {
 					if ($ctx !~ /[WEBC]x./ && $ca !~ /(?:\)|!|~|\*|-|\&|\||\+\+|\-\-|\{)$/) {
-						ERROR("need space before that '$op' $at\n" . $hereptr);
+						ERROR("space required before that '$op' $at\n" . $hereptr);
 					}
 					if ($ctx =~ /.xW/) {
-						ERROR("no space after that '$op' $at\n" . $hereptr);
+						ERROR("space prohibited after that '$op' $at\n" . $hereptr);
 					}
 
 				# unary ++ and unary -- are allowed no space on one side.
 				} elsif ($op eq '++' or $op eq '--') {
-					if ($ctx !~ /[WOBC]x[^W]/ && $ctx !~ /[^W]x[WOBEC]/) {
-						ERROR("need space one side of that '$op' $at\n" . $hereptr);
+					if ($ctx !~ /[WEOBC]x[^W]/ && $ctx !~ /[^W]x[WOBEC]/) {
+						ERROR("space required one side of that '$op' $at\n" . $hereptr);
 					}
-					if ($ctx =~ /WxB/ || ($ctx =~ /Wx./ && $cc =~ /^;/)) {
-						ERROR("no space before that '$op' $at\n" . $hereptr);
+					if ($ctx =~ /Wx[BE]/ ||
+					    ($ctx =~ /Wx./ && $cc =~ /^;/)) {
+						ERROR("space prohibited before that '$op' $at\n" . $hereptr);
 					}
+					if ($ctx =~ /ExW/) {
+						ERROR("space prohibited after that '$op' $at\n" . $hereptr);
+					}
+
 
 				# << and >> may either have or not have spaces both sides
 				} elsif ($op eq '<<' or $op eq '>>' or
@@ -1474,7 +1537,7 @@
 					 $op eq '*' or $op eq '/' or
 					 $op eq '%')
 				{
-					if ($ctx !~ /VxV|WxW|VxE|WxE|VxO|Cx.|.xC/) {
+					if ($ctx =~ /Wx[^WCE]|[^WCE]xW/) {
 						ERROR("need consistent spacing around '$op' $at\n" .
 							$hereptr);
 					}
@@ -1484,7 +1547,7 @@
 					# Ignore email addresses <foo@bar>
 					if (!($op eq '<' && $cb =~ /$;\S+\@\S+>/) &&
 					    !($op eq '>' && $cb =~ /<\S+\@\S+$;/)) {
-						ERROR("need spaces around that '$op' $at\n" . $hereptr);
+						ERROR("spaces required around that '$op' $at\n" . $hereptr);
 					}
 				}
 				$off += length($elements[$n + 1]);
@@ -1514,31 +1577,31 @@
 #need space before brace following if, while, etc
 		if (($line =~ /\(.*\){/ && $line !~ /\($Type\){/) ||
 		    $line =~ /do{/) {
-			ERROR("need a space before the open brace '{'\n" . $herecurr);
+			ERROR("space required before the open brace '{'\n" . $herecurr);
 		}
 
 # closing brace should have a space following it when it has anything
 # on the line
 		if ($line =~ /}(?!(?:,|;|\)))\S/) {
-			ERROR("need a space after that close brace '}'\n" . $herecurr);
+			ERROR("space required after that close brace '}'\n" . $herecurr);
 		}
 
 # check spacing on square brackets
 		if ($line =~ /\[\s/ && $line !~ /\[\s*$/) {
-			ERROR("no space after that open square bracket '['\n" . $herecurr);
+			ERROR("space prohibited after that open square bracket '['\n" . $herecurr);
 		}
 		if ($line =~ /\s\]/) {
-			ERROR("no space before that close square bracket ']'\n" . $herecurr);
+			ERROR("space prohibited before that close square bracket ']'\n" . $herecurr);
 		}
 
 # check spacing on paretheses
 		if ($line =~ /\(\s/ && $line !~ /\(\s*(?:\\)?$/ &&
 		    $line !~ /for\s*\(\s+;/) {
-			ERROR("no space after that open parenthesis '('\n" . $herecurr);
+			ERROR("space prohibited after that open parenthesis '('\n" . $herecurr);
 		}
 		if ($line =~ /(\s+)\)/ && $line !~ /^.\s*\)/ &&
 		    $line !~ /for\s*\(.*;\s+\)/) {
-			ERROR("no space before that close parenthesis ')'\n" . $herecurr);
+			ERROR("space prohibited before that close parenthesis ')'\n" . $herecurr);
 		}
 
 #goto labels aren't indented, allow a single space however
@@ -1549,7 +1612,7 @@
 
 # Need a space before open parenthesis after if, while etc
 		if ($line=~/\b(if|while|for|switch)\(/) {
-			ERROR("need a space before the open parenthesis '('\n" . $herecurr);
+			ERROR("space required before the open parenthesis '('\n" . $herecurr);
 		}
 
 # Check for illegal assignment in if conditional.
@@ -1562,10 +1625,12 @@
 
 			# Find out what is on the end of the line after the
 			# conditional.
-			substr($s, 0, length($c)) = '';
+			substr($s, 0, length($c), '');
 			$s =~ s/\n.*//g;
 			$s =~ s/$;//g; 	# Remove any comments
-			if (length($c) && $s !~ /^\s*({|;|)\s*\\*\s*$/) {
+			if (length($c) && $s !~ /^\s*({|;|)\s*\\*\s*$/ &&
+			    $c !~ /^.\#\s*if/)
+			{
 				ERROR("trailing statements should be on next line\n" . $herecurr);
 			}
 		}
@@ -1607,7 +1672,7 @@
 
 			# Find out what is on the end of the line after the
 			# conditional.
-			substr($s, 0, length($c)) = '';
+			substr($s, 0, length($c), '');
 			$s =~ s/\n.*//g;
 
 			if ($s =~ /^\s*;/) {
@@ -1631,7 +1696,7 @@
 		if ($tree && $rawline =~ m{^.\#\s*include\s*\<asm\/(.*)\.h\>}) {
 			my $checkfile = "$root/include/linux/$1.h";
 			if (-f $checkfile && $1 ne 'irq.h') {
-				CHK("Use #include <linux/$1.h> instead of <asm/$1.h>\n" .
+				WARN("Use #include <linux/$1.h> instead of <asm/$1.h>\n" .
 					$herecurr);
 			}
 		}
@@ -1692,15 +1757,24 @@
 			if ($#chunks > 0 && $level == 0) {
 				my $allowed = 0;
 				my $seen = 0;
-				my $herectx = $here . "\n";;
+				my $herectx = $here . "\n";
 				my $ln = $linenr - 1;
 				for my $chunk (@chunks) {
 					my ($cond, $block) = @{$chunk};
 
-					$herectx .= "$rawlines[$ln]\n[...]\n";
+					# If the condition carries leading newlines, then count those as offsets.
+					my ($whitespace) = ($cond =~ /^((?:\s*\n[+-])*\s*)/s);
+					my $offset = statement_rawlines($whitespace) - 1;
+
+					#print "COND<$cond> whitespace<$whitespace> offset<$offset>\n";
+
+					# We have looked at and allowed this specific line.
+					$suppress_ifbraces{$ln + $offset} = 1;
+
+					$herectx .= "$rawlines[$ln + $offset]\n[...]\n";
 					$ln += statement_rawlines($block) - 1;
 
-					substr($block, 0, length($cond)) = '';
+					substr($block, 0, length($cond), '');
 
 					$seen++ if ($block =~ /^\s*{/);
 
@@ -1721,16 +1795,10 @@
 				if ($seen && !$allowed) {
 					WARN("braces {} are not necessary for any arm of this statement\n" . $herectx);
 				}
-				# Either way we have looked over this whole
-				# statement and said what needs to be said.
-				$suppress_ifbraces = $endln;
 			}
 		}
-		if ($linenr > $suppress_ifbraces &&
+		if (!defined $suppress_ifbraces{$linenr - 1} &&
 					$line =~ /\b(if|while|for|else)\b/) {
-			my ($level, $endln, @chunks) =
-				ctx_statement_full($linenr, $realcnt, $-[0]);
-
 			my $allowed = 0;
 
 			# Check the pre-context.
@@ -1738,10 +1806,15 @@
 				#print "APW: ALLOWED: pre<$1>\n";
 				$allowed = 1;
 			}
+
+			my ($level, $endln, @chunks) =
+				ctx_statement_full($linenr, $realcnt, $-[0]);
+
 			# Check the condition.
 			my ($cond, $block) = @{$chunks[0]};
+			#print "CHECKING<$linenr> cond<$cond> block<$block>\n";
 			if (defined $cond) {
-				substr($block, 0, length($cond)) = '';
+				substr($block, 0, length($cond), '');
 			}
 			if (statement_lines($cond) > 1) {
 				#print "APW: ALLOWED: cond<$cond>\n";
@@ -1759,7 +1832,7 @@
 			if (defined $chunks[1]) {
 				my ($cond, $block) = @{$chunks[1]};
 				if (defined $cond) {
-					substr($block, 0, length($cond)) = '';
+					substr($block, 0, length($cond), '');
 				}
 				if ($block =~ /^\s*\{/) {
 					#print "APW: ALLOWED: chunk-1 block<$block>\n";
@@ -1882,6 +1955,28 @@
 		if ($line =~ /__FUNCTION__/) {
 			WARN("__func__ should be used instead of gcc specific __FUNCTION__\n"  . $herecurr);
 		}
+
+# check for semaphores used as mutexes
+		if ($line =~ /\b(DECLARE_MUTEX|init_MUTEX)\s*\(/) {
+			WARN("mutexes are preferred for single holder semaphores\n" . $herecurr);
+		}
+# check for semaphores used as mutexes
+		if ($line =~ /\binit_MUTEX_LOCKED\s*\(/) {
+			WARN("consider using a completion\n" . $herecurr);
+		}
+# recommend strict_strto* over simple_strto*
+		if ($line =~ /\bsimple_(strto.*?)\s*\(/) {
+			WARN("consider using strict_$1 in preference to simple_$1\n" . $herecurr);
+		}
+
+# use of NR_CPUS is usually wrong
+# ignore definitions of NR_CPUS and usage to define arrays as likely right
+		if ($line =~ /\bNR_CPUS\b/ &&
+		    $line !~ /^.#\s*define\s+NR_CPUS\s+/ &&
+		    $line !~ /^.\s*$Declare\s.*\[[^\]]*NR_CPUS[^\]]*\]/)
+		{
+			WARN("usage of NR_CPUS is often wrong - consider using cpu_possible(), num_possible_cpus(), for_each_possible_cpu(), etc\n" . $herecurr);
+		}
 	}
 
 	# If we have no input at all, then there is nothing to report on
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 41a049f..d39b59c 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -180,7 +180,7 @@
 	struct task_security_struct *tsec = current->security;
 	struct inode_security_struct *isec;
 
-	isec = kmem_cache_zalloc(sel_inode_cache, GFP_KERNEL);
+	isec = kmem_cache_zalloc(sel_inode_cache, GFP_NOFS);
 	if (!isec)
 		return -ENOMEM;
 
@@ -760,13 +760,13 @@
 	 * this early in the boot process. */
 	BUG_ON(!ss_initialized);
 
-	/* this might go away sometime down the line if there is a new user
-	 * of clone, but for now, nfs better not get here... */
-	BUG_ON(newsbsec->initialized);
-
 	/* how can we clone if the old one wasn't set up?? */
 	BUG_ON(!oldsbsec->initialized);
 
+	/* if fs is reusing a sb, just let its options stand... */
+	if (newsbsec->initialized)
+		return;
+
 	mutex_lock(&newsbsec->lock);
 
 	newsbsec->flags = oldsbsec->flags;
@@ -1143,7 +1143,7 @@
 		}
 
 		len = INITCONTEXTLEN;
-		context = kmalloc(len, GFP_KERNEL);
+		context = kmalloc(len, GFP_NOFS);
 		if (!context) {
 			rc = -ENOMEM;
 			dput(dentry);
@@ -1161,7 +1161,7 @@
 			}
 			kfree(context);
 			len = rc;
-			context = kmalloc(len, GFP_KERNEL);
+			context = kmalloc(len, GFP_NOFS);
 			if (!context) {
 				rc = -ENOMEM;
 				dput(dentry);
@@ -1185,7 +1185,8 @@
 			rc = 0;
 		} else {
 			rc = security_context_to_sid_default(context, rc, &sid,
-			                                     sbsec->def_sid);
+							     sbsec->def_sid,
+							     GFP_NOFS);
 			if (rc) {
 				printk(KERN_WARNING "%s:  context_to_sid(%s) "
 				       "returned %d for dev=%s ino=%ld\n",
@@ -1630,6 +1631,12 @@
 		else
 			av |= FILE__WRITE;
 	}
+	if (!av) {
+		/*
+		 * Special file opened with flags 3 for ioctl-only use.
+		 */
+		av = FILE__IOCTL;
+	}
 
 	return av;
 }
@@ -2423,7 +2430,7 @@
 		return -EOPNOTSUPP;
 
 	if (name) {
-		namep = kstrdup(XATTR_SELINUX_SUFFIX, GFP_KERNEL);
+		namep = kstrdup(XATTR_SELINUX_SUFFIX, GFP_NOFS);
 		if (!namep)
 			return -ENOMEM;
 		*name = namep;
diff --git a/security/selinux/include/security.h b/security/selinux/include/security.h
index f7d2f03..44e12ec 100644
--- a/security/selinux/include/security.h
+++ b/security/selinux/include/security.h
@@ -86,7 +86,8 @@
 int security_context_to_sid(char *scontext, u32 scontext_len,
 	u32 *out_sid);
 
-int security_context_to_sid_default(char *scontext, u32 scontext_len, u32 *out_sid, u32 def_sid);
+int security_context_to_sid_default(char *scontext, u32 scontext_len,
+				    u32 *out_sid, u32 def_sid, gfp_t gfp_flags);
 
 int security_get_user_sids(u32 callsid, char *username,
 			   u32 **sids, u32 *nel);
diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index f374186..3f2bad2 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -680,7 +680,8 @@
 
 }
 
-static int security_context_to_sid_core(char *scontext, u32 scontext_len, u32 *sid, u32 def_sid)
+static int security_context_to_sid_core(char *scontext, u32 scontext_len,
+					u32 *sid, u32 def_sid, gfp_t gfp_flags)
 {
 	char *scontext2;
 	struct context context;
@@ -709,7 +710,7 @@
 	   null suffix to the copy to avoid problems with the existing
 	   attr package, which doesn't view the null terminator as part
 	   of the attribute value. */
-	scontext2 = kmalloc(scontext_len+1,GFP_KERNEL);
+	scontext2 = kmalloc(scontext_len+1, gfp_flags);
 	if (!scontext2) {
 		rc = -ENOMEM;
 		goto out;
@@ -809,7 +810,7 @@
 int security_context_to_sid(char *scontext, u32 scontext_len, u32 *sid)
 {
 	return security_context_to_sid_core(scontext, scontext_len,
-	                                    sid, SECSID_NULL);
+					    sid, SECSID_NULL, GFP_KERNEL);
 }
 
 /**
@@ -829,10 +830,11 @@
  * Returns -%EINVAL if the context is invalid, -%ENOMEM if insufficient
  * memory is available, or 0 on success.
  */
-int security_context_to_sid_default(char *scontext, u32 scontext_len, u32 *sid, u32 def_sid)
+int security_context_to_sid_default(char *scontext, u32 scontext_len, u32 *sid,
+				    u32 def_sid, gfp_t gfp_flags)
 {
 	return security_context_to_sid_core(scontext, scontext_len,
-	                                    sid, def_sid);
+					    sid, def_sid, gfp_flags);
 }
 
 static int compute_sid_handle_invalid_context(
diff --git a/sound/oss/ac97_codec.c b/sound/oss/ac97_codec.c
index 87a6726..b63839e 100644
--- a/sound/oss/ac97_codec.c
+++ b/sound/oss/ac97_codec.c
@@ -1202,3 +1202,5 @@
 
 EXPORT_SYMBOL(ac97_probe_codec);
 
+MODULE_LICENSE("GPL");
+
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index 25ccfce..7d911a18 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -617,6 +617,18 @@
 	return 1; /* timeout */
 }
 
+static int snd_es1968_ac97_wait_poll(struct es1968 *chip)
+{
+	int timeout = 100000;
+
+	while (timeout-- > 0) {
+		if (!(inb(chip->io_port + ESM_AC97_INDEX) & 1))
+			return 0;
+	}
+	snd_printd("es1968: ac97 timeout\n");
+	return 1; /* timeout */
+}
+
 static void snd_es1968_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short val)
 {
 	struct es1968 *chip = ac97->private_data;
@@ -645,7 +657,7 @@
 	outb(reg | 0x80, chip->io_port + ESM_AC97_INDEX);
 	/*msleep(1);*/
 
-	if (! snd_es1968_ac97_wait(chip)) {
+	if (!snd_es1968_ac97_wait_poll(chip)) {
 		data = inw(chip->io_port + ESM_AC97_DATA);
 		/*msleep(1);*/
 	}