regulator: core: Provide standard enable operations for regmap users
Since the enable(), disable() and is_enabled() operations for most regmap
based regulators come down to reading and updating a single register bit
we can factor out the code and allow these drivers to just define which
bit to update using the enable_reg and enable_mask fields in their desc
and then use operations provided by the core.
As well as the code saving this opens the door to future optimisation of
the bulk operations - if the core can realise that we are updating a
single register for multiple regulators then it should be able to combine
these updates into a single physical operation.
Signed-off-by: Mark Brown <[email protected]>
Acked-by: Liam Girdwood <[email protected]>
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 02d2e15..9fafa00 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1725,6 +1725,61 @@
}
EXPORT_SYMBOL_GPL(regulator_disable_deferred);
+/**
+ * regulator_is_enabled_regmap - standard is_enabled() for regmap users
+ *
+ * @rdev: regulator to operate on
+ *
+ * Regulators that use regmap for their register I/O can set the
+ * enable_reg and enable_mask fields in their descriptor and then use
+ * this as their is_enabled operation, saving some code.
+ */
+int regulator_is_enabled_regmap(struct regulator_dev *rdev)
+{
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
+ if (ret != 0)
+ return ret;
+
+ return (val & rdev->desc->enable_mask) != 0;
+}
+EXPORT_SYMBOL_GPL(regulator_is_enabled_regmap);
+
+/**
+ * regulator_enable_regmap - standard enable() for regmap users
+ *
+ * @rdev: regulator to operate on
+ *
+ * Regulators that use regmap for their register I/O can set the
+ * enable_reg and enable_mask fields in their descriptor and then use
+ * this as their enable() operation, saving some code.
+ */
+int regulator_enable_regmap(struct regulator_dev *rdev)
+{
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ rdev->desc->enable_mask,
+ rdev->desc->enable_mask);
+}
+EXPORT_SYMBOL_GPL(regulator_enable_regmap);
+
+/**
+ * regulator_disable_regmap - standard disable() for regmap users
+ *
+ * @rdev: regulator to operate on
+ *
+ * Regulators that use regmap for their register I/O can set the
+ * enable_reg and enable_mask fields in their descriptor and then use
+ * this as their disable() operation, saving some code.
+ */
+int regulator_disable_regmap(struct regulator_dev *rdev)
+{
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ rdev->desc->enable_mask, 0);
+}
+EXPORT_SYMBOL_GPL(regulator_disable_regmap);
+
static int _regulator_is_enabled(struct regulator_dev *rdev)
{
/* If we don't know then assume that the regulator is always on */
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index d1c2389..8160bc8 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -167,6 +167,8 @@
* @vsel_reg: Register for selector when using regulator_regmap_X_voltage_
* @vsel_mask: Mask for register bitfield used for selector
+ * @enable_reg: Register for control when using regmap enable/disable ops
+ * @enable_mask: Mask for control when using regmap enable/disable ops
*/
struct regulator_desc {
const char *name;
@@ -180,6 +182,8 @@
unsigned int vsel_reg;
unsigned int vsel_mask;
+ unsigned int enable_reg;
+ unsigned int enable_mask;
};
/**
@@ -258,6 +262,9 @@
int regulator_get_voltage_sel_regmap(struct regulator_dev *rdev);
int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel);
+int regulator_is_enabled_regmap(struct regulator_dev *rdev);
+int regulator_enable_regmap(struct regulator_dev *rdev);
+int regulator_disable_regmap(struct regulator_dev *rdev);
void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
