cpufreq: move freq change notifications to cpufreq core
Most of the drivers do following in their ->target_index() routines:
struct cpufreq_freqs freqs;
freqs.old = old freq...
freqs.new = new freq...
cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
/* Change rate here */
cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
This is replicated over all cpufreq drivers today and there doesn't exists a
good enough reason why this shouldn't be moved to cpufreq core instead.
There are few special cases though, like exynos5440, which doesn't do everything
on the call to ->target_index() routine and call some kind of bottom halves for
doing this work, work/tasklet/etc..
They may continue doing notification from their own code as flag:
CPUFREQ_ASYNC_NOTIFICATION is already set for them.
All drivers are also modified in this patch to avoid breaking 'git bisect', as
double notification would happen otherwise.
Acked-by: Hans-Christian Egtvedt <[email protected]>
Acked-by: Jesper Nilsson <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Acked-by: Russell King <[email protected]>
Acked-by: Stephen Warren <[email protected]>
Tested-by: Andrew Lunn <[email protected]>
Tested-by: Nicolas Pitre <[email protected]>
Reviewed-by: Lan Tianyu <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c
index 8bdcf32..67e302e 100644
--- a/drivers/cpufreq/s3c64xx-cpufreq.c
+++ b/drivers/cpufreq/s3c64xx-cpufreq.c
@@ -65,54 +65,46 @@
static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
unsigned int index)
{
- int ret;
- struct cpufreq_freqs freqs;
struct s3c64xx_dvfs *dvfs;
+ unsigned int old_freq, new_freq;
+ int ret;
- freqs.old = clk_get_rate(armclk) / 1000;
- freqs.new = s3c64xx_freq_table[index].frequency;
- freqs.flags = 0;
+ old_freq = clk_get_rate(armclk) / 1000;
+ new_freq = s3c64xx_freq_table[index].frequency;
dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[index].driver_data];
- pr_debug("Transition %d-%dkHz\n", freqs.old, freqs.new);
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
#ifdef CONFIG_REGULATOR
- if (vddarm && freqs.new > freqs.old) {
+ if (vddarm && new_freq > old_freq) {
ret = regulator_set_voltage(vddarm,
dvfs->vddarm_min,
dvfs->vddarm_max);
if (ret != 0) {
pr_err("Failed to set VDDARM for %dkHz: %d\n",
- freqs.new, ret);
- freqs.new = freqs.old;
- goto post_notify;
+ new_freq, ret);
+ return ret;
}
}
#endif
- ret = clk_set_rate(armclk, freqs.new * 1000);
+ ret = clk_set_rate(armclk, new_freq * 1000);
if (ret < 0) {
pr_err("Failed to set rate %dkHz: %d\n",
- freqs.new, ret);
- freqs.new = freqs.old;
+ new_freq, ret);
+ return ret;
}
-post_notify:
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
- if (ret)
- goto err;
-
#ifdef CONFIG_REGULATOR
- if (vddarm && freqs.new < freqs.old) {
+ if (vddarm && new_freq < old_freq) {
ret = regulator_set_voltage(vddarm,
dvfs->vddarm_min,
dvfs->vddarm_max);
if (ret != 0) {
pr_err("Failed to set VDDARM for %dkHz: %d\n",
- freqs.new, ret);
- goto err_clk;
+ new_freq, ret);
+ if (clk_set_rate(armclk, old_freq * 1000) < 0)
+ pr_err("Failed to restore original clock rate\n");
+
+ return ret;
}
}
#endif
@@ -121,14 +113,6 @@
clk_get_rate(armclk) / 1000);
return 0;
-
-err_clk:
- if (clk_set_rate(armclk, freqs.old * 1000) < 0)
- pr_err("Failed to restore original clock rate\n");
-err:
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
- return ret;
}
#ifdef CONFIG_REGULATOR
