dt-bindings: Another pass removing cases of 'allOf' containing a '$ref'
Another pass at removing unnecessary use of 'allOf' with a '$ref'.
json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords.
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: Dmitry Torokhov <[email protected]>
Cc: Pavel Machek <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Vignesh Raghavendra <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Kishon Vijay Abraham I <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Acked-by: Mark Brown <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Acked-By: Vinod Koul <[email protected]>
Acked-by: Lee Jones <[email protected]>
Acked-by: Marek Behún <[email protected]>
Acked-by: Miquel Raynal <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Acked-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 7eb8659..0420fa5 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -104,8 +104,7 @@
- "1.5A" and "3.0A", 5V 1.5A and 5V 3.0A respectively, as defined in USB
Type-C Cable and Connector specification, when Power Delivery is not
supported.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/string
+ $ref: /schemas/types.yaml#/definitions/string
enum:
- default
- 1.5A
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
index a1d5a3266..a9d34dd 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
@@ -72,8 +72,7 @@
- const: hpd-removed
ddc:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description: >
Phandle of the I2C controller used for DDC EDID probing
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
index d3dd7a7..f08a01d 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
@@ -76,9 +76,8 @@
adi,input-depth:
description: Number of bits per color component at the input.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 8, 10, 12 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 8, 10, 12 ]
adi,input-colorspace:
description: Input color space.
diff --git a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
index 9be44a6..b00246f 100644
--- a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
@@ -26,9 +26,8 @@
reg-io-width:
description:
Width (in bytes) of the registers specified by the reg property.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [1, 4]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 4]
default: 1
clocks:
diff --git a/Documentation/devicetree/bindings/display/panel/display-timings.yaml b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
index 56903de..6d30575 100644
--- a/Documentation/devicetree/bindings/display/panel/display-timings.yaml
+++ b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
@@ -31,8 +31,7 @@
patternProperties:
"^timing":
type: object
- allOf:
- - $ref: panel-timing.yaml#
+ $ref: panel-timing.yaml#
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/display/ste,mcde.yaml b/Documentation/devicetree/bindings/display/ste,mcde.yaml
index de0c678..564ea845 100644
--- a/Documentation/devicetree/bindings/display/ste,mcde.yaml
+++ b/Documentation/devicetree/bindings/display/ste,mcde.yaml
@@ -58,8 +58,8 @@
"^dsi@[0-9a-f]+$":
description: subnodes for the three DSI host adapters
type: object
- allOf:
- - $ref: dsi-controller.yaml#
+ $ref: dsi-controller.yaml#
+
properties:
compatible:
const: ste,mcde-dsi
diff --git a/Documentation/devicetree/bindings/input/adc-joystick.yaml b/Documentation/devicetree/bindings/input/adc-joystick.yaml
index 721878d..2ee04e03 100644
--- a/Documentation/devicetree/bindings/input/adc-joystick.yaml
+++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml
@@ -61,11 +61,10 @@
description: EV_ABS specific event code generated by the axis.
abs-range:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - items:
- - description: minimum value
- - description: maximum value
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: minimum value
+ - description: maximum value
description: >
Minimum and maximum values produced by the axis.
For an ABS_X axis this will be the left-most and right-most
diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
index c7ed287..9362b1e 100644
--- a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
+++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
@@ -32,8 +32,7 @@
patternProperties:
"^multi-led@[0-9a-b]$":
type: object
- allOf:
- - $ref: leds-class-multicolor.yaml#
+ $ref: leds-class-multicolor.yaml#
description:
This node represents one of the RGB LED devices on Turris Omnia.
No subnodes need to be added for subchannels since this controller only
diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
index c192b5f..f12fe5b 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
@@ -55,8 +55,7 @@
patternProperties:
'^multi-led@[0-9a-f]$':
type: object
- allOf:
- - $ref: leds-class-multicolor.yaml#
+ $ref: leds-class-multicolor.yaml#
properties:
reg:
minItems: 1
diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
index d1f53bd..a52f3a8 100644
--- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
@@ -38,18 +38,14 @@
description:
This property specifies the delay in usecs between the
assertion of the CS and the first clock pulse.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - default: 0
- - minimum: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
google,cros-ec-spi-msg-delay:
description:
This property specifies the delay in usecs between messages.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - default: 0
- - minimum: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
google,has-vbc-nvram:
description:
diff --git a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
index 0922536..d681a46 100644
--- a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
@@ -96,8 +96,7 @@
rockchip,boot-ecc-strength:
enum: [16, 24, 40, 60, 70]
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
If specified it indicates that a different BCH/ECC setting is
supported by the boot ROM.
diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
index 07a00f5..31bf825 100644
--- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@@ -88,8 +88,7 @@
type: object
description: CPSW external ports
- allOf:
- - $ref: ethernet-controller.yaml#
+ $ref: ethernet-controller.yaml#
properties:
reg:
diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
index 267b695..dc287d4 100644
--- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
@@ -76,8 +76,7 @@
connector:
type: object
- allOf:
- - $ref: ../connector/usb-connector.yaml
+ $ref: /schemas/connector/usb-connector.yaml
properties:
vbus-supply: true
diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
index 72e8f27..99f506d 100644
--- a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
+++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
@@ -46,9 +46,7 @@
patternProperties:
"^i2c@[1-4]$":
type: object
-
- allOf:
- - $ref: /schemas/i2c/i2c-controller.yaml#
+ $ref: /schemas/i2c/i2c-controller.yaml#
examples:
- |
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
index 0868154..fb9605f 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
@@ -95,8 +95,7 @@
addresses. Cache and memory access settings are provided through a
Memory Protection Unit (MPU), programmable only from the R5Fs.
- allOf:
- - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+ $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
index 9d128b9..64461d4 100644
--- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
+++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
@@ -281,10 +281,7 @@
PRUSS INTC Node. Each PRUSS has a single interrupt controller instance
that is common to all the PRU cores. This should be represented as an
interrupt-controller node.
-
- allOf:
- - $ref: /schemas/interrupt-controller/ti,pruss-intc.yaml#
-
+ $ref: /schemas/interrupt-controller/ti,pruss-intc.yaml#
type: object
mdio@[a-f0-9]+$:
@@ -292,10 +289,7 @@
MDIO Node. Each PRUSS has an MDIO module that can be used to control
external PHYs. The MDIO module used within the PRU-ICSS is an instance of
the MDIO Controller used in TI Davinci SoCs.
-
- allOf:
- - $ref: /schemas/net/ti,davinci-mdio.yaml#
-
+ $ref: /schemas/net/ti,davinci-mdio.yaml#
type: object
"^(pru|rtu|txpru)@[0-9a-f]+$":
@@ -305,10 +299,7 @@
inactive by using the standard DT string property, "status". The ICSSG IP
present on K3 SoCs have additional auxiliary PRU cores with slightly
different IP integration.
-
- allOf:
- - $ref: /schemas/remoteproc/ti,pru-rproc.yaml#
-
+ $ref: /schemas/remoteproc/ti,pru-rproc.yaml#
type: object
required:
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
index d4fc8fd..b3dbcba 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
@@ -115,8 +115,7 @@
By default, custom protocol is assumed, meaning that protocol is
configured according to protocol defined in related DAI link node,
such as i2s, left justified, right justified, dsp and pdm protocols.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
"#clock-cells":
description: Configure the SAI device as master clock provider.
diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
index d77c828..2ad17b3 100644
--- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
+++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
@@ -176,13 +176,12 @@
4 - Drive weak low and active high
5 - Drive Hi-Z and active high
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 2
- maxItems: 2
- items:
- maximum: 15
- default: [2, 2]
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
+ items:
+ maximum: 15
+ default: [2, 2]
required:
- compatible
diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
index 36b7251..6d0511a 100644
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -93,9 +93,7 @@
patternProperties:
"^.*@[0-9a-f]+$":
type: object
-
- allOf:
- - $ref: spi-peripheral-props.yaml
+ $ref: spi-peripheral-props.yaml
required:
- compatible
diff --git a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
index ead1571..b5a8c98 100644
--- a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
+++ b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
@@ -32,9 +32,7 @@
connector:
type: object
-
- allOf:
- - $ref: ../connector/usb-connector.yaml
+ $ref: /schemas/connector/usb-connector.yaml#
properties:
compatible:
