Merge tag 'imx7ulp-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
i.MX7ULP device tree for 4.21:
- It includes the initial device tree for i.MX7ULP SoC and EVK board
support.
* tag 'imx7ulp-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx: add imx7ulp evk support
ARM: dts: imx: add common imx7ulp dtsi support
dt-bindings: fsl: add imx7ulp pm related components bindings
dt-bindings: fsl: add compatible for imx7ulp evk
clk: imx: add imx7ulp clk driver
clk: imx: implement new clk_hw based APIs
clk: imx: make mux parent strings const
dt-bindings: clock: add imx7ulp clock binding doc
clk: imx: add imx7ulp composite clk support
clk: imx: add pfdv2 support
clk: imx: add pllv4 support
clk: fractional-divider: add CLK_FRAC_DIVIDER_ZERO_BASED flag support
clk: imx: add gatable clock divider support
Signed-off-by: Olof Johansson <[email protected]>
diff --git a/.mailmap b/.mailmap
index a76be45f..28fecaf 100644
--- a/.mailmap
+++ b/.mailmap
@@ -159,6 +159,7 @@
Peter Oruba <[email protected]>
Pratyush Anand <[email protected]> <[email protected]>
Praveen BP <[email protected]>
+Punit Agrawal <[email protected]> <[email protected]>
Qais Yousef <[email protected]> <[email protected]>
Oleksij Rempel <[email protected]> <[email protected]>
Oleksij Rempel <[email protected]> <[email protected]>
diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-pattern b/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
index fb3d1e0..1e5d172 100644
--- a/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
+++ b/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
@@ -37,8 +37,8 @@
0-| / \/ \/
+---0----1----2----3----4----5----6------------> time (s)
- 2. To make the LED go instantly from one brigntess value to another,
- we should use use zero-time lengths (the brightness must be same as
+ 2. To make the LED go instantly from one brightness value to another,
+ we should use zero-time lengths (the brightness must be same as
the previous tuple's). So the format should be:
"brightness_1 duration_1 brightness_1 0 brightness_2 duration_2
brightness_2 0 ...". For example:
diff --git a/Documentation/devicetree/bindings/arm/amlogic,scpi.txt b/Documentation/devicetree/bindings/arm/amlogic,scpi.txt
index 7b9a861..5ab59da 100644
--- a/Documentation/devicetree/bindings/arm/amlogic,scpi.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic,scpi.txt
@@ -17,4 +17,11 @@
- compatible : should be "amlogic,meson-gxbb-scp-shmem" for SRAM based shared
memory on Amlogic GXBB SoC.
+Sensor bindings for the sensors based on SCPI Message Protocol
+--------------------------------------------------------------
+SCPI provides an API to access the various sensors on the SoC.
+
+Required properties:
+- compatible : should be "amlogic,meson-gxbb-scpi-sensors".
+
[0] Documentation/devicetree/bindings/arm/arm,scpi.txt
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index 4498292..8dbc259 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -91,8 +91,10 @@
- "amlogic,p230" (Meson gxl s905d)
- "amlogic,p231" (Meson gxl s905d)
+ - "phicomm,n1" (Meson gxl s905d)
- "amlogic,p241" (Meson gxl s805x)
+ - "libretech,aml-s805x-ac" (Meson gxl s805x)
- "amlogic,p281" (Meson gxl s905w)
- "oranth,tx3-mini" (Meson gxl s905w)
diff --git a/Documentation/devicetree/bindings/arm/emtrion.txt b/Documentation/devicetree/bindings/arm/emtrion.txt
new file mode 100644
index 0000000..83329ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/emtrion.txt
@@ -0,0 +1,12 @@
+Emtrion Devicetree Bindings
+===========================
+
+emCON Series:
+-------------
+
+Required root node properties
+ - compatible:
+ - "emtrion,emcon-mx6", "fsl,imx6q"; : emCON-MX6D or emCON-MX6Q SoM
+ - "emtrion,emcon-mx6-avari", "fsl,imx6q"; : emCON-MX6D or emCON-MX6Q SoM on Avari Base
+ - "emtrion,emcon-mx6", "fsl,imx6dl"; : emCON-MX6S or emCON-MX6DL SoM
+ - "emtrion,emcon-mx6-avari", "fsl,imx6dl"; : emCON-MX6S or emCON-MX6DL SoM on Avari Base
diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.txt b/Documentation/devicetree/bindings/arm/renesas,prr.txt
new file mode 100644
index 0000000..08e482e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/renesas,prr.txt
@@ -0,0 +1,20 @@
+Renesas Product Register
+
+Most Renesas ARM SoCs have a Product Register or Boundary Scan ID Register that
+allows to retrieve SoC product and revision information. If present, a device
+node for this register should be added.
+
+Required properties:
+ - compatible: Must be one of:
+ "renesas,prr"
+ "renesas,bsid"
+ - reg: Base address and length of the register block.
+
+
+Examples
+--------
+
+ prr: chipid@ff000044 {
+ compatible = "renesas,prr";
+ reg = <0 0xff000044 0 4>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 0cc7123..7ce7382 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -152,6 +152,40 @@
- compatible = "google,veyron-pinky-rev2", "google,veyron-pinky",
"google,veyron", "rockchip,rk3288";
+- Google Scarlet - with display from Kingdisplay
+ Required root node properties:
+ - compatible = "google,scarlet-rev15-sku7", "google,scarlet-rev15",
+ "google,scarlet-rev14-sku7", "google,scarlet-rev14",
+ "google,scarlet-rev13-sku7", "google,scarlet-rev13",
+ "google,scarlet-rev12-sku7", "google,scarlet-rev12",
+ "google,scarlet-rev11-sku7", "google,scarlet-rev11",
+ "google,scarlet-rev10-sku7", "google,scarlet-rev10",
+ "google,scarlet-rev9-sku7", "google,scarlet-rev9",
+ "google,scarlet-rev8-sku7", "google,scarlet-rev8",
+ "google,scarlet-rev7-sku7", "google,scarlet-rev7",
+ "google,scarlet-rev6-sku7", "google,scarlet-rev6",
+ "google,scarlet-rev5-sku7", "google,scarlet-rev5",
+ "google,scarlet-rev4-sku7", "google,scarlet-rev4",
+ "google,scarlet-rev3-sku7", "google,scarlet-rev3",
+ "google,scarlet", "google,gru", "rockchip,rk3399";
+
+- Google Scarlet - with display from Innolux
+ Required root node properties:
+ - compatible = "google,scarlet-rev15-sku6", "google,scarlet-rev15",
+ "google,scarlet-rev14-sku6", "google,scarlet-rev14",
+ "google,scarlet-rev13-sku6", "google,scarlet-rev13",
+ "google,scarlet-rev12-sku6", "google,scarlet-rev12",
+ "google,scarlet-rev11-sku6", "google,scarlet-rev11",
+ "google,scarlet-rev10-sku6", "google,scarlet-rev10",
+ "google,scarlet-rev9-sku6", "google,scarlet-rev9",
+ "google,scarlet-rev8-sku6", "google,scarlet-rev8",
+ "google,scarlet-rev7-sku6", "google,scarlet-rev7",
+ "google,scarlet-rev6-sku6", "google,scarlet-rev6",
+ "google,scarlet-rev5-sku6", "google,scarlet-rev5",
+ "google,scarlet-rev4-sku6", "google,scarlet-rev4",
+ "google,scarlet", "google,gru", "rockchip,rk3399";
+
+
- Google Speedy (Asus C201 Chromebook):
Required root node properties:
- compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8",
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index f5e0f82..7f91c2a 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -27,7 +27,7 @@
compatible = "renesas,r8a77470"
- RZ/G2M (R8A774A1)
compatible = "renesas,r8a774a1"
- - RZ/G2E (RA8774C0)
+ - RZ/G2E (R8A774C0)
compatible = "renesas,r8a774c0"
- R-Car M1A (R8A77781)
compatible = "renesas,r8a7778"
@@ -101,6 +101,10 @@
compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"
- iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven)
compatible = "iwave,g20m", "renesas,r8a7743"
+ - iWave Systems RZ/G1N Qseven Development Platform (iW-RainboW-G20D-Qseven)
+ compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7744"
+ - iWave Systems RZ/G1N Qseven System On Module (iW-RainboW-G20M-Qseven)
+ compatible = "iwave,g20m", "renesas,r8a7744"
- Kingfisher (SBEV-RCAR-KF-M03)
compatible = "shimafuji,kingfisher"
- Koelsch (RTP0RC7791SEB00010S)
@@ -149,21 +153,3 @@
compatible = "renesas,v3msk", "renesas,r8a77970"
- Wheat (RTP0RC7792ASKB0000JE)
compatible = "renesas,wheat", "renesas,r8a7792"
-
-
-Most Renesas ARM SoCs have a Product Register or Boundary Scan ID Register that
-allows to retrieve SoC product and revision information. If present, a device
-node for this register should be added.
-
-Required properties:
- - compatible: Must be "renesas,prr" or "renesas,bsid"
- - reg: Base address and length of the register block.
-
-
-Examples
---------
-
- prr: chipid@ff000044 {
- compatible = "renesas,prr";
- reg = <0 0xff000044 0 4>;
- };
diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt
index e4beec3..94b9c12 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.txt
+++ b/Documentation/devicetree/bindings/arm/sunxi.txt
@@ -14,7 +14,8 @@
allwinner,sun8i-a83t
allwinner,sun8i-h2-plus
allwinner,sun8i-h3
- allwinner-sun8i-r40
+ allwinner,sun8i-r40
+ allwinner,sun8i-t3
allwinner,sun8i-v3s
allwinner,sun9i-a80
allwinner,sun50i-a64
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
index c9fd6d1..2d89cdc 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
@@ -15,6 +15,9 @@
Optional properties:
- nvidia,invert-interrupt: If present, inverts the PMU interrupt signal.
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt source. The value must be 2.
Example:
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
index 63cd911..3f128e4 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
@@ -11,6 +11,7 @@
+ allwinner,sun4i-a10-mali
+ allwinner,sun7i-a20-mali
+ allwinner,sun8i-h3-mali
+ + allwinner,sun50i-a64-mali
+ allwinner,sun50i-h5-mali
+ amlogic,meson-gxbb-mali
+ amlogic,meson-gxl-mali
@@ -73,6 +74,10 @@
Required properties:
* resets: phandle to the reset line for the GPU
+ - allwinner,sun50i-a64-mali
+ Required properties:
+ * resets: phandle to the reset line for the GPU
+
- allwinner,sun50i-h5-mali
Required properties:
* resets: phandle to the reset line for the GPU
diff --git a/Documentation/devicetree/bindings/i2c/i2c-omap.txt b/Documentation/devicetree/bindings/i2c/i2c-omap.txt
index 7e49839..4b90ba9f 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-omap.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-omap.txt
@@ -1,8 +1,12 @@
I2C for OMAP platforms
Required properties :
-- compatible : Must be "ti,omap2420-i2c", "ti,omap2430-i2c", "ti,omap3-i2c"
- or "ti,omap4-i2c"
+- compatible : Must be
+ "ti,omap2420-i2c" for OMAP2420 SoCs
+ "ti,omap2430-i2c" for OMAP2430 SoCs
+ "ti,omap3-i2c" for OMAP3 SoCs
+ "ti,omap4-i2c" for OMAP4+ SoCs
+ "ti,am654-i2c", "ti,omap4-i2c" for AM654 SoCs
- ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
- #address-cells = <1>;
- #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
index b3c86f4..c81993f 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
@@ -140,6 +140,10 @@
Example:
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <linux/irq.h>
+/* ... */
+
/* VADC node */
pmic_vadc: vadc@3100 {
compatible = "qcom,spmi-vadc";
@@ -151,7 +155,7 @@
io-channel-ranges;
/* Channel node */
- usb_id_nopull {
+ adc-chan@VADC_LR_MUX10_USB_ID {
reg = <VADC_LR_MUX10_USB_ID>;
qcom,decimation = <512>;
qcom,ratiometric;
diff --git a/Documentation/devicetree/bindings/media/cedrus.txt b/Documentation/devicetree/bindings/media/cedrus.txt
index a089a0c..33833a4 100644
--- a/Documentation/devicetree/bindings/media/cedrus.txt
+++ b/Documentation/devicetree/bindings/media/cedrus.txt
@@ -31,7 +31,7 @@
ranges;
/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
- cma_pool: cma@4a000000 {
+ cma_pool: default-pool {
compatible = "shared-dma-pool";
size = <0x6000000>;
alloc-ranges = <0x4a000000 0x6000000>;
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt
similarity index 95%
rename from Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt
rename to Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt
index 4c33b29..add95367 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt
@@ -10,6 +10,8 @@
and chosen using the ramcode board selector. If omitted, only one
set of tables can be present and said tables will be used
irrespective of ram-code configuration.
+- interrupts : Should contain EMC General interrupt.
+- clocks : Should contain EMC clock.
Child device nodes describe the memory settings for different configurations and clock rates.
@@ -20,6 +22,8 @@
#size-cells = < 0 >;
compatible = "nvidia,tegra20-emc";
reg = <0x7000f4000 0x200>;
+ interrupts = <0 78 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_EMC>;
}
diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
index 5bb3a18..54c66d0 100644
--- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
+++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
@@ -10,6 +10,7 @@
"allwinner,sun8i-r40-gmac"
"allwinner,sun8i-v3s-emac"
"allwinner,sun50i-a64-emac"
+ "allwinner,sun50i-h6-emac", "allwinner-sun50i-a64-emac"
- reg: address and length of the register for the device.
- interrupts: interrupt for the device
- interrupt-names: must be "macirq"
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index 66df1e81..9b2b8d6 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -13,11 +13,12 @@
Required properties:
- compatible: should contain the platform identifier such as:
- "fsl,ls1021a-pcie", "snps,dw-pcie"
- "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"
+ "fsl,ls1021a-pcie"
+ "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"
"fsl,ls2088a-pcie"
"fsl,ls1088a-pcie"
"fsl,ls1046a-pcie"
+ "fsl,ls1043a-pcie"
"fsl,ls1012a-pcie"
- reg: base addresses and lengths of the PCIe controller register blocks.
- interrupts: A list of interrupt outputs of the controller. Must contain an
@@ -35,7 +36,7 @@
Example:
pcie@3400000 {
- compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
+ compatible = "fsl,ls1021a-pcie";
reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt
index 8dd7b3a..f331316 100644
--- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt
@@ -2,7 +2,8 @@
Required properties:
-- compatible: Should be "brcm,bcm2835-vchiq"
+- compatible: Should be "brcm,bcm2835-vchiq" on BCM2835, otherwise
+ "brcm,bcm2836-vchiq".
- reg: Physical base address and length of the doorbell register pair
- interrupts: The interrupt number
See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt
index 276387d..e17c07b 100644
--- a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt
@@ -15,7 +15,8 @@
- compatible:
Array of strings.
One of:
- - "nvidia,tegra186-bpmp-thermal".
+ - "nvidia,tegra186-bpmp-thermal"
+ - "nvidia,tegra194-bpmp-thermal"
- #thermal-sensor-cells: Cell for sensor index.
Single-cell integer.
Must be <1>.
diff --git a/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt
index a092053..a9da22bd 100644
--- a/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt
+++ b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt
@@ -4,12 +4,19 @@
- compatible : should be "amlogic,meson6-timer"
- reg : Specifies base physical address and size of the registers.
-- interrupts : The interrupt of the first timer
+- interrupts : The four interrupts, one for each timer event
+- clocks : phandles to the pclk (system clock) and XTAL clocks
+- clock-names : must contain "pclk" and "xtal"
Example:
timer@c1109940 {
compatible = "amlogic,meson6-timer";
reg = <0xc1109940 0x14>;
- interrupts = <0 10 1>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>, <&clk81>;
+ clock-names = "xtal", "pclk";
};
diff --git a/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.txt b/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.txt
index 9a6e251..b8f02c6 100644
--- a/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.txt
+++ b/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.txt
@@ -5,9 +5,13 @@
- reg : Address and length of the register set of timer controller.
- interrupts : Should be the interrupt number.
+Optional properties:
+- clocks : Should contain a single entry describing the clock input.
+
Example:
timer0: timer@d4014000 {
compatible = "mrvl,mmp-timer";
reg = <0xd4014000 0x100>;
interrupts = <13>;
+ clocks = <&coreclk 2>;
};
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt
index 3eee9e5..4156c3e1 100644
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt
@@ -59,6 +59,14 @@
- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V.
+- power-domains: A list of PM domain specifiers that reference each power-domain
+ used by the xHCI controller. This list must comprise of a specifier for the
+ XUSBA and XUSBC power-domains. See ../power/power_domain.txt and
+ ../arm/tegra/nvidia,tegra20-pmc.txt for details.
+- power-domain-names: A list of names that represent each of the specifiers in
+ the 'power-domains' property. Must include 'xusb_ss' and 'xusb_host' which
+ represent the power-domains XUSBA and XUSBC, respectively. See
+ ../power/power_domain.txt for details.
Optional properties:
--------------------
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 4b1a2a8..8c413d8 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -296,6 +296,7 @@
parade Parade Technologies Inc.
pericom Pericom Technology Inc.
pervasive Pervasive Displays, Inc.
+phicomm PHICOMM Co., Ltd.
phytec PHYTEC Messtechnik GmbH
picochip Picochip Ltd
pine64 Pine64
diff --git a/Documentation/i2c/busses/i2c-nvidia-gpu b/Documentation/i2c/busses/i2c-nvidia-gpu
new file mode 100644
index 0000000..31884d2
--- /dev/null
+++ b/Documentation/i2c/busses/i2c-nvidia-gpu
@@ -0,0 +1,18 @@
+Kernel driver i2c-nvidia-gpu
+
+Datasheet: not publicly available.
+
+Authors:
+ Ajay Gupta <[email protected]>
+
+Description
+-----------
+
+i2c-nvidia-gpu is a driver for I2C controller included in NVIDIA Turing
+and later GPUs and it is used to communicate with Type-C controller on GPUs.
+
+If your 'lspci -v' listing shows something like the following,
+
+01:00.3 Serial bus controller [0c80]: NVIDIA Corporation Device 1ad9 (rev a1)
+
+then this driver should support the I2C controller of your GPU.
diff --git a/Documentation/x86/x86_64/mm.txt b/Documentation/x86/x86_64/mm.txt
index 73aaaa3..804f942 100644
--- a/Documentation/x86/x86_64/mm.txt
+++ b/Documentation/x86/x86_64/mm.txt
@@ -34,23 +34,24 @@
____________________________________________________________|___________________________________________________________
| | | |
ffff800000000000 | -128 TB | ffff87ffffffffff | 8 TB | ... guard hole, also reserved for hypervisor
- ffff880000000000 | -120 TB | ffffc7ffffffffff | 64 TB | direct mapping of all physical memory (page_offset_base)
- ffffc80000000000 | -56 TB | ffffc8ffffffffff | 1 TB | ... unused hole
+ ffff880000000000 | -120 TB | ffff887fffffffff | 0.5 TB | LDT remap for PTI
+ ffff888000000000 | -119.5 TB | ffffc87fffffffff | 64 TB | direct mapping of all physical memory (page_offset_base)
+ ffffc88000000000 | -55.5 TB | ffffc8ffffffffff | 0.5 TB | ... unused hole
ffffc90000000000 | -55 TB | ffffe8ffffffffff | 32 TB | vmalloc/ioremap space (vmalloc_base)
ffffe90000000000 | -23 TB | ffffe9ffffffffff | 1 TB | ... unused hole
ffffea0000000000 | -22 TB | ffffeaffffffffff | 1 TB | virtual memory map (vmemmap_base)
ffffeb0000000000 | -21 TB | ffffebffffffffff | 1 TB | ... unused hole
ffffec0000000000 | -20 TB | fffffbffffffffff | 16 TB | KASAN shadow memory
+__________________|____________|__________________|_________|____________________________________________________________
+ |
+ | Identical layout to the 56-bit one from here on:
+____________________________________________________________|____________________________________________________________
+ | | | |
fffffc0000000000 | -4 TB | fffffdffffffffff | 2 TB | ... unused hole
| | | | vaddr_end for KASLR
fffffe0000000000 | -2 TB | fffffe7fffffffff | 0.5 TB | cpu_entry_area mapping
- fffffe8000000000 | -1.5 TB | fffffeffffffffff | 0.5 TB | LDT remap for PTI
+ fffffe8000000000 | -1.5 TB | fffffeffffffffff | 0.5 TB | ... unused hole
ffffff0000000000 | -1 TB | ffffff7fffffffff | 0.5 TB | %esp fixup stacks
-__________________|____________|__________________|_________|____________________________________________________________
- |
- | Identical layout to the 47-bit one from here on:
-____________________________________________________________|____________________________________________________________
- | | | |
ffffff8000000000 | -512 GB | ffffffeeffffffff | 444 GB | ... unused hole
ffffffef00000000 | -68 GB | fffffffeffffffff | 64 GB | EFI region mapping space
ffffffff00000000 | -4 GB | ffffffff7fffffff | 2 GB | ... unused hole
@@ -83,7 +84,7 @@
__________________|____________|__________________|_________|___________________________________________________________
| | | |
0000800000000000 | +64 PB | ffff7fffffffffff | ~16K PB | ... huge, still almost 64 bits wide hole of non-canonical
- | | | | virtual memory addresses up to the -128 TB
+ | | | | virtual memory addresses up to the -64 PB
| | | | starting offset of kernel mappings.
__________________|____________|__________________|_________|___________________________________________________________
|
@@ -91,23 +92,24 @@
____________________________________________________________|___________________________________________________________
| | | |
ff00000000000000 | -64 PB | ff0fffffffffffff | 4 PB | ... guard hole, also reserved for hypervisor
- ff10000000000000 | -60 PB | ff8fffffffffffff | 32 PB | direct mapping of all physical memory (page_offset_base)
- ff90000000000000 | -28 PB | ff9fffffffffffff | 4 PB | LDT remap for PTI
+ ff10000000000000 | -60 PB | ff10ffffffffffff | 0.25 PB | LDT remap for PTI
+ ff11000000000000 | -59.75 PB | ff90ffffffffffff | 32 PB | direct mapping of all physical memory (page_offset_base)
+ ff91000000000000 | -27.75 PB | ff9fffffffffffff | 3.75 PB | ... unused hole
ffa0000000000000 | -24 PB | ffd1ffffffffffff | 12.5 PB | vmalloc/ioremap space (vmalloc_base)
ffd2000000000000 | -11.5 PB | ffd3ffffffffffff | 0.5 PB | ... unused hole
ffd4000000000000 | -11 PB | ffd5ffffffffffff | 0.5 PB | virtual memory map (vmemmap_base)
ffd6000000000000 | -10.5 PB | ffdeffffffffffff | 2.25 PB | ... unused hole
ffdf000000000000 | -8.25 PB | fffffdffffffffff | ~8 PB | KASAN shadow memory
- fffffc0000000000 | -4 TB | fffffdffffffffff | 2 TB | ... unused hole
- | | | | vaddr_end for KASLR
- fffffe0000000000 | -2 TB | fffffe7fffffffff | 0.5 TB | cpu_entry_area mapping
- fffffe8000000000 | -1.5 TB | fffffeffffffffff | 0.5 TB | ... unused hole
- ffffff0000000000 | -1 TB | ffffff7fffffffff | 0.5 TB | %esp fixup stacks
__________________|____________|__________________|_________|____________________________________________________________
|
| Identical layout to the 47-bit one from here on:
____________________________________________________________|____________________________________________________________
| | | |
+ fffffc0000000000 | -4 TB | fffffdffffffffff | 2 TB | ... unused hole
+ | | | | vaddr_end for KASLR
+ fffffe0000000000 | -2 TB | fffffe7fffffffff | 0.5 TB | cpu_entry_area mapping
+ fffffe8000000000 | -1.5 TB | fffffeffffffffff | 0.5 TB | ... unused hole
+ ffffff0000000000 | -1 TB | ffffff7fffffffff | 0.5 TB | %esp fixup stacks
ffffff8000000000 | -512 GB | ffffffeeffffffff | 444 GB | ... unused hole
ffffffef00000000 | -68 GB | fffffffeffffffff | 64 GB | EFI region mapping space
ffffffff00000000 | -4 GB | ffffffff7fffffff | 2 GB | ... unused hole
diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt
index 97b7adb..68aed07 100644
--- a/Documentation/x86/zero-page.txt
+++ b/Documentation/x86/zero-page.txt
@@ -25,7 +25,7 @@
0C8/004 ALL ext_cmd_line_ptr cmd_line_ptr high 32bits
140/080 ALL edid_info Video mode setup (struct edid_info)
1C0/020 ALL efi_info EFI 32 information (struct efi_info)
-1E0/004 ALL alk_mem_k Alternative mem check, in KB
+1E0/004 ALL alt_mem_k Alternative mem check, in KB
1E4/004 ALL scratch Scratch field for the kernel setup code
1E8/001 ALL e820_entries Number of entries in e820_table (below)
1E9/001 ALL eddbuf_entries Number of entries in eddbuf (below)
diff --git a/MAINTAINERS b/MAINTAINERS
index f4855974..e3dfefb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6607,9 +6607,9 @@
HID CORE LAYER
M: Jiri Kosina <[email protected]>
-R: Benjamin Tissoires <[email protected]>
+M: Benjamin Tissoires <[email protected]>
L: [email protected]
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git
S: Maintained
F: drivers/hid/
F: include/linux/hid*
@@ -6861,6 +6861,13 @@
S: Maintained
F: drivers/i2c/i2c-core-acpi.c
+I2C CONTROLLER DRIVER FOR NVIDIA GPU
+M: Ajay Gupta <[email protected]>
+L: [email protected]
+S: Maintained
+F: Documentation/i2c/busses/i2c-nvidia-gpu
+F: drivers/i2c/busses/i2c-nvidia-gpu.c
+
I2C MUXES
M: Peter Rosin <[email protected]>
L: [email protected]
@@ -8367,7 +8374,7 @@
LIBATA PATA ARASAN COMPACT FLASH CONTROLLER
M: Viresh Kumar <[email protected]>
L: [email protected]
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
S: Maintained
F: include/linux/pata_arasan_cf_data.h
F: drivers/ata/pata_arasan_cf.c
@@ -8384,7 +8391,7 @@
LIBATA PATA FARADAY FTIDE010 AND GEMINI SATA BRIDGE DRIVERS
M: Linus Walleij <[email protected]>
L: [email protected]
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
S: Maintained
F: drivers/ata/pata_ftide010.c
F: drivers/ata/sata_gemini.c
@@ -8403,7 +8410,7 @@
LIBATA SATA PROMISE TX2/TX4 CONTROLLER DRIVER
M: Mikael Pettersson <[email protected]>
L: [email protected]
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
S: Maintained
F: drivers/ata/sata_promise.*
@@ -10784,6 +10791,14 @@
S: Maintained
F: arch/arm/mach-omap2/omap_hwmod.*
+OMAP I2C DRIVER
+M: Vignesh R <[email protected]>
+L: [email protected]
+L: [email protected]
+S: Maintained
+F: Documentation/devicetree/bindings/i2c/i2c-omap.txt
+F: drivers/i2c/busses/i2c-omap.c
+
OMAP IMAGING SUBSYSTEM (OMAP3 ISP and OMAP4 ISS)
M: Laurent Pinchart <[email protected]>
L: [email protected]
@@ -12359,6 +12374,13 @@
S: Maintained
F: drivers/iommu/qcom_iommu.c
+QUALCOMM TSENS THERMAL DRIVER
+M: Amit Kucheria <[email protected]>
+L: [email protected]
+L: [email protected]
+S: Maintained
+F: drivers/thermal/qcom/
+
QUALCOMM VENUS VIDEO ACCELERATOR DRIVER
M: Stanimir Varbanov <[email protected]>
L: [email protected]
@@ -15436,9 +15458,9 @@
USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
M: Jiri Kosina <[email protected]>
-R: Benjamin Tissoires <[email protected]>
+M: Benjamin Tissoires <[email protected]>
L: [email protected]
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git
S: Maintained
F: Documentation/hid/hiddev.txt
F: drivers/hid/usbhid/
diff --git a/Makefile b/Makefile
index 9fce8b9..2f36db8 100644
--- a/Makefile
+++ b/Makefile
@@ -2,7 +2,7 @@
VERSION = 4
PATCHLEVEL = 20
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
NAME = "People's Front"
# *DOCUMENTATION*
diff --git a/arch/alpha/include/asm/termios.h b/arch/alpha/include/asm/termios.h
index 6a8c53d..b7c77bb 100644
--- a/arch/alpha/include/asm/termios.h
+++ b/arch/alpha/include/asm/termios.h
@@ -73,9 +73,15 @@
})
#define user_termios_to_kernel_termios(k, u) \
- copy_from_user(k, u, sizeof(struct termios))
+ copy_from_user(k, u, sizeof(struct termios2))
#define kernel_termios_to_user_termios(u, k) \
+ copy_to_user(u, k, sizeof(struct termios2))
+
+#define user_termios_to_kernel_termios_1(k, u) \
+ copy_from_user(k, u, sizeof(struct termios))
+
+#define kernel_termios_to_user_termios_1(u, k) \
copy_to_user(u, k, sizeof(struct termios))
#endif /* _ALPHA_TERMIOS_H */
diff --git a/arch/alpha/include/uapi/asm/ioctls.h b/arch/alpha/include/uapi/asm/ioctls.h
index 1e9121c..9713116 100644
--- a/arch/alpha/include/uapi/asm/ioctls.h
+++ b/arch/alpha/include/uapi/asm/ioctls.h
@@ -32,6 +32,11 @@
#define TCXONC _IO('t', 30)
#define TCFLSH _IO('t', 31)
+#define TCGETS2 _IOR('T', 42, struct termios2)
+#define TCSETS2 _IOW('T', 43, struct termios2)
+#define TCSETSW2 _IOW('T', 44, struct termios2)
+#define TCSETSF2 _IOW('T', 45, struct termios2)
+
#define TIOCSWINSZ _IOW('t', 103, struct winsize)
#define TIOCGWINSZ _IOR('t', 104, struct winsize)
#define TIOCSTART _IO('t', 110) /* start output, like ^Q */
diff --git a/arch/alpha/include/uapi/asm/termbits.h b/arch/alpha/include/uapi/asm/termbits.h
index de6c836..4575ba3 100644
--- a/arch/alpha/include/uapi/asm/termbits.h
+++ b/arch/alpha/include/uapi/asm/termbits.h
@@ -26,6 +26,19 @@ struct termios {
speed_t c_ospeed; /* output speed */
};
+/* Alpha has identical termios and termios2 */
+
+struct termios2 {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_cc[NCCS]; /* control characters */
+ cc_t c_line; /* line discipline (== c_cc[19]) */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
/* Alpha has matching termios and ktermios */
struct ktermios {
@@ -152,6 +165,7 @@ struct ktermios {
#define B3000000 00034
#define B3500000 00035
#define B4000000 00036
+#define BOTHER 00037
#define CSIZE 00001400
#define CS5 00000000
@@ -169,6 +183,9 @@ struct ktermios {
#define CMSPAR 010000000000 /* mark or space (stick) parity */
#define CRTSCTS 020000000000 /* flow control */
+#define CIBAUD 07600000
+#define IBSHIFT 16
+
/* c_lflag bits */
#define ISIG 0x00000080
#define ICANON 0x00000100
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index fb21bf5..d75c646 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -89,6 +89,7 @@
bcm4708-asus-rt-ac68u.dtb \
bcm4708-buffalo-wzr-1750dhp.dtb \
bcm4708-linksys-ea6300-v1.dtb \
+ bcm4708-linksys-ea6500-v2.dtb \
bcm4708-luxul-xap-1510.dtb \
bcm4708-luxul-xwc-1000.dtb \
bcm4708-netgear-r6250.dtb \
@@ -396,6 +397,7 @@
imx6dl-cubox-i-emmc-som-v15.dtb \
imx6dl-cubox-i-som-v15.dtb \
imx6dl-dfi-fs700-m60.dtb \
+ imx6dl-emcon-avari.dtb \
imx6dl-gw51xx.dtb \
imx6dl-gw52xx.dtb \
imx6dl-gw53xx.dtb \
@@ -460,6 +462,7 @@
imx6q-display5-tianma-tm070-1280x768.dtb \
imx6q-dmo-edmqmx6.dtb \
imx6q-dms-ba16.dtb \
+ imx6q-emcon-avari.dtb \
imx6q-evi.dtb \
imx6q-gk802.dtb \
imx6q-gw51xx.dtb \
@@ -557,6 +560,7 @@
imx6ul-liteboard.dtb \
imx6ul-opos6uldev.dtb \
imx6ul-pico-hobbit.dtb \
+ imx6ul-pico-pi.dtb \
imx6ul-tx6ul-0010.dtb \
imx6ul-tx6ul-0011.dtb \
imx6ul-tx6ul-mainboard.dtb \
@@ -569,9 +573,11 @@
imx7d-colibri-emmc-eval-v3.dtb \
imx7d-colibri-eval-v3.dtb \
imx7d-nitrogen7.dtb \
+ imx7d-pico-hobbit.dtb \
imx7d-pico-pi.dtb \
imx7d-sbc-imx7.dtb \
imx7d-sdb.dtb \
+ imx7d-sdb-reva.dtb \
imx7d-sdb-sht11.dtb \
imx7s-colibri-eval-v3.dtb \
imx7s-warp.dtb
@@ -583,6 +589,7 @@
ls1021a-twr.dtb
dtb-$(CONFIG_SOC_VF610) += \
vf500-colibri-eval-v3.dtb \
+ vf610-bk4.dtb \
vf610-colibri-eval-v3.dtb \
vf610m4-colibri.dtb \
vf610-cosmic.dtb \
@@ -591,6 +598,7 @@
vf610-zii-cfu1.dtb \
vf610-zii-dev-rev-b.dtb \
vf610-zii-dev-rev-c.dtb \
+ vf610-zii-scu4-aib.dtb \
vf610-zii-ssmb-spu3.dtb
dtb-$(CONFIG_ARCH_MXS) += \
imx23-evk.dtb \
@@ -780,12 +788,18 @@
owl-s500-sparky.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += \
prima2-evb.dtb
+dtb-$(CONFIG_ARCH_PXA) += \
+ pxa300-raumfeld-connector.dtb \
+ pxa300-raumfeld-controller.dtb \
+ pxa300-raumfeld-speaker-l.dtb \
+ pxa300-raumfeld-speaker-m.dtb \
+ pxa300-raumfeld-speaker-one.dtb \
+ pxa300-raumfeld-speaker-s.dtb
dtb-$(CONFIG_ARCH_OXNAS) += \
ox810se-wd-mbwe.dtb \
ox820-cloudengines-pogoplug-series-3.dtb
dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8060-dragonboard.dtb \
- qcom-apq8064-arrow-sd-600eval.dtb \
qcom-apq8064-cm-qs600.dtb \
qcom-apq8064-ifc6410.dtb \
qcom-apq8064-sony-xperia-yuga.dtb \
@@ -831,6 +845,8 @@
r8a7743-iwg20d-q7.dtb \
r8a7743-iwg20d-q7-dbcm-ca.dtb \
r8a7743-sk-rzg1m.dtb \
+ r8a7744-iwg20d-q7.dtb \
+ r8a7744-iwg20d-q7-dbcm-ca.dtb \
r8a7745-iwg22d-sodimm.dtb \
r8a7745-iwg22d-sodimm-dbhd-ca.dtb \
r8a7745-sk-rzg1e.dtb \
@@ -1062,12 +1078,15 @@
sun8i-r16-nintendo-super-nes-classic.dtb \
sun8i-r16-parrot.dtb \
sun8i-r40-bananapi-m2-ultra.dtb \
+ sun8i-t3-cqa3t-bv3.dtb \
sun8i-v3s-licheepi-zero.dtb \
sun8i-v3s-licheepi-zero-dock.dtb \
sun8i-v40-bananapi-m2-berry.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb
+dtb-$(CONFIG_MACH_SUNIV) += \
+ suniv-f1c100s-licheepi-nano.dtb
dtb-$(CONFIG_ARCH_TANGO) += \
tango4-vantage-1172.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
@@ -1214,6 +1233,7 @@
aspeed-ast2500-evb.dtb \
aspeed-bmc-arm-centriq2400-rep.dtb \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
+ aspeed-bmc-facebook-cmm.dtb \
aspeed-bmc-facebook-tiogapass.dtb \
aspeed-bmc-intel-s2600wf.dtb \
aspeed-bmc-opp-lanyang.dtb \
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index d4d33cd..07f5939 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -20,6 +20,10 @@
display0 = &lcd0;
};
+ chosen {
+ stdout-path = &uart3;
+ };
+
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 601bf4d..f4a20ca 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -67,7 +67,13 @@
debounce-delay-ms = <5>;
col-scan-delay-us = <2>;
- row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&matrix_keypad_default>;
+ pinctrl-1 = <&matrix_keypad_sleep>;
+
+ linux,wakeup;
+
+ row-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH /* Bank0, pin3 */
&gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
&gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
@@ -155,16 +161,23 @@
beeper: beeper {
compatible = "gpio-beeper";
pinctrl-names = "default";
- pinctrl-0 = <&beeper_pins>;
+ pinctrl-0 = <&beeper_pins_default>;
+ pinctrl-1 = <&beeper_pins_sleep>;
gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
};
};
&am43xx_pinmux {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&wlan_pins_default>;
+ pinctrl-0 = <&wlan_pins_default &ddr3_vtt_toggle_default &unused_pins &debugss_pins>;
pinctrl-1 = <&wlan_pins_sleep>;
+ ddr3_vtt_toggle_default: ddr_vtt_toggle_default {
+ pinctrl-single,pins = <
+ 0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7) /* spi0_cs0.gpio5_7 */
+ >;
+ };
+
i2c0_pins: i2c0_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
@@ -511,27 +524,121 @@
>;
};
- uart0_pins_default: uart0_pins_default {
- pinctrl-single,pins = <
- AM4372_IOPAD(0x968, PIN_INPUT | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */
- AM4372_IOPAD(0x96C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */
- AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- AM4372_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
- >;
- };
-
- beeper_pins: beeper_pins {
+ beeper_pins_default: beeper_pins_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x9e0, PIN_OUTPUT_PULLUP | MUX_MODE7) /* cam1_field.gpio4_12 */
>;
};
+ beeper_pins_sleep: beeper_pins_sleep {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9e0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* cam1_field.gpio4_12 */
+ >;
+ };
+
+ unused_pins: unused_pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa3c, PIN_INPUT | PULL_DISABLE | MUX_MODE7)
+ AM4372_IOPAD(0xa40, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa44, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa48, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa4c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa50, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa54, PIN_INPUT | PULL_DISABLE | MUX_MODE7)
+ AM4372_IOPAD(0xa58, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa60, PIN_INPUT | PULL_DISABLE | MUX_MODE7)
+ AM4372_IOPAD(0xa68, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa70, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa78, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa7c, PIN_INPUT | PULL_DISABLE)
+ AM4372_IOPAD(0xac8, PIN_INPUT_PULLDOWN)
+ AM4372_IOPAD(0xad4, PIN_INPUT_PULLDOWN)
+ AM4372_IOPAD(0xad8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xadc, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xae0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xae4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xae8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xaec, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xaf0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xaf4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xaf8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xafc, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xb00, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xb04, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xb08, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xb0c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xb10, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xb14, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xb18, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ debugss_pins: pinmux_debugss_pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xa90, PIN_INPUT_PULLDOWN)
+ AM4372_IOPAD(0xa94, PIN_INPUT_PULLDOWN)
+ AM4372_IOPAD(0xa98, PIN_INPUT_PULLDOWN)
+ AM4372_IOPAD(0xa9c, PIN_INPUT_PULLDOWN)
+ AM4372_IOPAD(0xaa0, PIN_INPUT_PULLDOWN)
+ AM4372_IOPAD(0xaa4, PIN_INPUT_PULLDOWN)
+ AM4372_IOPAD(0xaa8, PIN_INPUT_PULLDOWN)
+ >;
+ };
+
+ uart0_pins_default: uart0_pins_default {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */
+ AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */
+ AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM4372_IOPAD(0x974, PIN_INPUT | PULL_DISABLE | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ uart0_pins_sleep: uart0_pins_sleep {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_ctsn.uart0_ctsn */
+ AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_rtsn.uart0_rtsn */
+ AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM4372_IOPAD(0x974, PIN_INPUT_PULLDOWN | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ matrix_keypad_default: matrix_keypad_default {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7)
+ AM4372_IOPAD(0x9a8, PIN_OUTPUT | MUX_MODE7)
+ AM4372_IOPAD(0x9ac, PIN_INPUT | PULL_DISABLE | MUX_MODE9)
+ AM4372_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ matrix_keypad_sleep: matrix_keypad_sleep {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9a4, PULL_UP | MUX_MODE7)
+ AM4372_IOPAD(0x9a8, PULL_UP | MUX_MODE7)
+ AM4372_IOPAD(0x9ac, PIN_INPUT | PULL_DISABLE | MUX_MODE9)
+ AM4372_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
};
&uart0 {
status = "okay";
- pinctrl-names = "default";
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart0_pins_default>;
+ pinctrl-1 = <&uart0_pins_sleep>;
};
&i2c0 {
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
index a567669..916a977 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -44,7 +44,7 @@
};
/* The voltage to the MMC card is hardwired at 3.3V */
- vmmc: fixedregulator@0 {
+ vmmc: regulator-vmmc {
compatible = "regulator-fixed";
regulator-name = "vmmc";
regulator-min-microvolt = <3300000>;
@@ -52,7 +52,7 @@
regulator-boot-on;
};
- veth: fixedregulator@0 {
+ veth: regulator-veth {
compatible = "regulator-fixed";
regulator-name = "veth";
regulator-min-microvolt = <3300000>;
@@ -567,4 +567,3 @@
};
};
};
-
diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts b/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts
index df12276..c2ece0b 100644
--- a/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts
@@ -13,7 +13,7 @@
bootargs = "console=ttyS4,115200 earlyprintk";
};
- memory {
+ memory@80000000 {
reg = <0x80000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
new file mode 100644
index 0000000..9f194b5
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+ model = "Facebook Backpack CMM BMC";
+ compatible = "facebook,cmm-bmc", "aspeed,ast2500";
+
+ aliases {
+ /*
+ * Override the default uart aliases to avoid breaking
+ * the legacy applications.
+ */
+ serial0 = &uart5;
+ serial1 = &uart1;
+ serial2 = &uart3;
+ serial3 = &uart4;
+
+ /*
+ * Hardcode the bus number of i2c switches' channels to
+ * avoid breaking the legacy applications.
+ */
+ i2c16 = &imux16;
+ i2c17 = &imux17;
+ i2c18 = &imux18;
+ i2c19 = &imux19;
+ i2c20 = &imux20;
+ i2c21 = &imux21;
+ i2c22 = &imux22;
+ i2c23 = &imux23;
+ i2c24 = &imux24;
+ i2c25 = &imux25;
+ i2c26 = &imux26;
+ i2c27 = &imux27;
+ i2c28 = &imux28;
+ i2c29 = &imux29;
+ i2c30 = &imux30;
+ i2c31 = &imux31;
+ i2c32 = &imux32;
+ i2c33 = &imux33;
+ i2c34 = &imux34;
+ i2c35 = &imux35;
+ i2c36 = &imux36;
+ i2c37 = &imux37;
+ i2c38 = &imux38;
+ i2c39 = &imux39;
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+/*
+ * Update reset type to "system" (full chip) to fix warm reboot hang issue
+ * when reset type is set to default ("soc", gated by reset mask registers).
+ */
+&wdt1 {
+ status = "okay";
+ aspeed,reset-type = "system";
+};
+
+/*
+ * wdt2 is not used by Backpack CMM.
+ */
+&wdt2 {
+ status = "disabled";
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+#include "facebook-bmc-flash-layout.dtsi"
+ };
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default
+ &pinctrl_ndsr1_default
+ &pinctrl_ndtr1_default
+ &pinctrl_nrts1_default>;
+};
+
+&uart3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd3_default
+ &pinctrl_rxd3_default
+ &pinctrl_ncts3_default
+ &pinctrl_ndcd3_default
+ &pinctrl_nri3_default>;
+};
+
+&uart4 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd4_default
+ &pinctrl_rxd4_default>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac1 {
+ status = "okay";
+ no-hw-checksum;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+/*
+ * I2C bus reserved for communication with COM-E.
+ */
+&i2c0 {
+ status = "okay";
+};
+
+/*
+ * I2C bus to Line Cards and Fabric Cards.
+ */
+&i2c1 {
+ status = "okay";
+
+ i2c-switch@77 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x77>;
+
+ imux16: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux17: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux18: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux19: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux20: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux21: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux22: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux23: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+/*
+ * I2C bus to Power Distribution Board.
+ */
+&i2c2 {
+ status = "okay";
+
+ i2c-switch@71 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+
+ imux24: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux25: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux26: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux27: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux28: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux29: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux30: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux31: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+/*
+ * I2c bus connected with temperature sensors on CMM.
+ */
+&i2c3 {
+ status = "okay";
+};
+
+/*
+ * I2C bus reserved for communication with COM-E.
+ */
+&i2c4 {
+ status = "okay";
+};
+
+/*
+ * I2c bus connected with ADM1278.
+ */
+&i2c5 {
+ status = "okay";
+};
+
+/*
+ * I2c bus connected with I/O Expander.
+ */
+&i2c6 {
+ status = "okay";
+};
+
+/*
+ * I2c bus connected with I/O Expander and EPROMs.
+ */
+&i2c7 {
+ status = "okay";
+};
+
+/*
+ * I2C bus to Fan Control Board.
+ */
+&i2c8 {
+ status = "okay";
+
+ i2c-switch@77 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x77>;
+
+ imux32: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux33: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux34: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux35: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux36: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux37: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux38: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux39: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+/*
+ * I2C bus to CMM CPLD.
+ */
+&i2c13 {
+ status = "okay";
+};
+
+&adc {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
index 7a291de..22dade6 100644
--- a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
@@ -13,7 +13,7 @@
bootargs = "earlyprintk";
};
- memory {
+ memory@80000000 {
reg = <0x80000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
index d598b63..024e52a 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
@@ -14,7 +14,7 @@
bootargs = "console=ttyS4,115200 earlyprintk";
};
- memory {
+ memory@80000000 {
reg = <0x80000000 0x40000000>;
};
@@ -322,4 +322,3 @@
&adc {
status = "okay";
};
-
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index c7084a8..9aa1d44 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -26,6 +26,16 @@
no-map;
reg = <0x5f000000 0x01000000>; /* 16M */
};
+
+ coldfire_memory: codefire_memory@5ee00000 {
+ reg = <0x5ee00000 0x00200000>;
+ no-map;
+ };
+
+ flash_memory: region@98000000 {
+ no-map;
+ reg = <0x98000000 0x01000000>; /* 16MB */
+ };
};
leds {
@@ -44,6 +54,22 @@
};
};
+ fsi: gpio-fsi {
+ compatible = "aspeed,ast2400-cf-fsi-master", "fsi-master";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ memory-region = <&coldfire_memory>;
+ aspeed,sram = <&sram>;
+ aspeed,cvic = <&cvic>;
+
+ clock-gpios = <&gpio ASPEED_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio ASPEED_GPIO(A, 5) GPIO_ACTIVE_HIGH>;
+ mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ trans-gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+ };
+
gpio-keys {
compatible = "gpio-keys";
@@ -169,6 +195,12 @@
status = "okay";
};
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi>;
+};
+
&gpio {
pin_func_mode0 {
gpio-hog;
@@ -303,13 +335,6 @@
line-name = "SYS_PWROK_BMC";
};
- pin_gpio_h6 {
- gpio-hog;
- gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "SCM1_FSI0_DATA_EN";
- };
-
pin_gpio_h7 {
gpio-hog;
gpios = <ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
index 7d28c03..76fe994 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -30,6 +30,11 @@
no-map;
reg = <0x98000000 0x04000000>; /* 64M */
};
+
+ coldfire_memory: codefire_memory@9ef00000 {
+ reg = <0x9ef00000 0x00100000>;
+ no-map;
+ };
};
leds {
@@ -49,11 +54,15 @@
};
fsi: gpio-fsi {
- compatible = "fsi-master-gpio", "fsi-master";
+ compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
#address-cells = <2>;
#size-cells = <0>;
no-gpio-delays;
+ memory-region = <&coldfire_memory>;
+ aspeed,sram = <&sram>;
+ aspeed,cvic = <&cvic>;
+
clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
@@ -76,6 +85,11 @@
linux,code = <ASPEED_GPIO(Q, 7)>;
};
};
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 12>;
+ };
};
&fmc {
@@ -274,3 +288,11 @@
&ibt {
status = "okay";
};
+
+&vhub {
+ status = "okay";
+};
+
+&adc {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
index 6560361..ad54117 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
@@ -56,6 +56,11 @@
};
};
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 12>;
+ };
+
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -583,3 +588,7 @@
&ibt {
status = "okay";
};
+
+&adc {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
index 43ed139..33d7045 100644
--- a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
@@ -17,7 +17,7 @@
bootargs = "console=ttyS4,115200 earlyprintk";
};
- memory {
+ memory@80000000 {
reg = <0x80000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi
index 043c717..bd83962 100644
--- a/arch/arm/boot/dts/axp81x.dtsi
+++ b/arch/arm/boot/dts/axp81x.dtsi
@@ -48,6 +48,11 @@
interrupt-controller;
#interrupt-cells = <1>;
+ ac_power_supply: ac-power-supply {
+ compatible = "x-powers,axp813-ac-power-supply";
+ status = "disabled";
+ };
+
axp_adc: adc {
compatible = "x-powers,axp813-adc";
#io-channel-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 2fd111d..0d2538b 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -41,6 +41,14 @@
model = "Broadcom Northstar Plus SoC";
interrupt-parent = <&gic>;
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ ethernet0 = &amac0;
+ ethernet1 = &amac1;
+ ethernet2 = &amac2;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index b7f79f1..644d907 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2017 Stefan Wahren <[email protected]>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
index 7036240..00323ba 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016 Stefan Wahren <[email protected]>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index cb2d6d7..29f970f 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -30,9 +30,9 @@
#power-domain-cells = <1>;
};
- mailbox@7e00b840 {
+ vchiq: mailbox@7e00b840 {
compatible = "brcm,bcm2835-vchiq";
- reg = <0x7e00b840 0xf>;
+ reg = <0x7e00b840 0x3c>;
interrupts = <0 2>;
};
};
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index 2fef70a..ac4408b 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "bcm2836.dtsi"
-#include "bcm2835-rpi.dtsi"
+#include "bcm2836-rpi.dtsi"
#include "bcm283x-rpi-smsc9514.dtsi"
#include "bcm283x-rpi-usb-host.dtsi"
diff --git a/arch/arm/boot/dts/bcm2836-rpi.dtsi b/arch/arm/boot/dts/bcm2836-rpi.dtsi
new file mode 100644
index 0000000..c4c858b
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2836-rpi.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm2835-rpi.dtsi"
+
+&vchiq {
+ compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq";
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index 4adb85e..eca36e3 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "bcm2837.dtsi"
-#include "bcm2835-rpi.dtsi"
+#include "bcm2836-rpi.dtsi"
#include "bcm283x-rpi-lan7515.dtsi"
#include "bcm283x-rpi-usb-host.dtsi"
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index c318bcb..a0ba0f6 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "bcm2837.dtsi"
-#include "bcm2835-rpi.dtsi"
+#include "bcm2836-rpi.dtsi"
#include "bcm283x-rpi-smsc9514.dtsi"
#include "bcm283x-rpi-usb-host.dtsi"
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
index 7b7ab6a..4a89a18 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "bcm2837.dtsi"
-#include "bcm2835-rpi.dtsi"
+#include "bcm2836-rpi.dtsi"
/ {
memory {
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
new file mode 100644
index 0000000..babcfec
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <[email protected]>
+ * Copyright (C) 2018 Rene Kjellerup <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "linksys,ea6500-v2", "brcm,bcm4708";
+ model = "Linksys EA6500 V2";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&usb3_phy {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/bcm47081.dtsi
index 9829d04..ed13af0 100644
--- a/arch/arm/boot/dts/bcm47081.dtsi
+++ b/arch/arm/boot/dts/bcm47081.dtsi
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for BCM47081 SoC.
*
* Copyright © 2014 Rafał Miłecki <[email protected]>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
*/
#include "bcm5301x.dtsi"
diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/bcm4709.dtsi
index c645fea..e1bb866 100644
--- a/arch/arm/boot/dts/bcm4709.dtsi
+++ b/arch/arm/boot/dts/bcm4709.dtsi
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2016 Rafał Miłecki <[email protected]>
- *
- * Licensed under the ISC license.
*/
#include "bcm4708.dtsi"
diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
index f7c3e27..cdc5ff5 100644
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2016 Rafał Miłecki <[email protected]>
- *
- * Licensed under the ISC license.
*/
#include "bcm4708.dtsi"
diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
index 19e61b5..e15e2a1 100644
--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2016 Rafał Miłecki <[email protected]>
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 7a5c188c..fd7af94 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -37,6 +37,8 @@
reg = <0x0400 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_uart1>;
status = "disabled";
};
};
@@ -391,6 +393,48 @@
status = "disabled";
};
+ dmu@1800c000 {
+ compatible = "simple-bus";
+ ranges = <0 0x1800c000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cru@100 {
+ compatible = "simple-bus";
+ reg = <0x100 0x1a4>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pin-controller@1c0 {
+ compatible = "brcm,bcm4708-pinmux";
+ reg = <0x1c0 0x24>;
+ reg-names = "cru_gpio_control";
+
+ spi-pins {
+ groups = "spi_grp";
+ function = "spi";
+ };
+
+ i2c {
+ groups = "i2c_grp";
+ function = "i2c";
+ };
+
+ pwm {
+ groups = "pwm0_grp", "pwm1_grp",
+ "pwm2_grp", "pwm3_grp";
+ function = "pwm";
+ };
+
+ pinmux_uart1: uart1 {
+ groups = "uart1_grp";
+ function = "uart1";
+ };
+ };
+ };
+ };
+
lcpll0: lcpll0@1800c100 {
#clock-cells = <1>;
compatible = "brcm,nsp-lcpll0";
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
index 453a2a3..5054fa9 100644
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2016 Rafał Miłecki <[email protected]>
- *
- * Licensed under the ISC license.
*/
#include <dt-bindings/gpio/gpio.h>
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
index 6df6151..f597640 100644
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -143,6 +143,37 @@
reg = <0x4800e0 0x10>;
#reset-cells = <2>;
};
+
+ ahci: sata@8000 {
+ compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci";
+ reg-names = "ahci", "top-ctrl";
+ reg = <0xa000 0x9ac>, <0x8040 0x24>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&pmb0 3 1>;
+ reset-names = "ahci";
+ status = "disabled";
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata_phy0>;
+ };
+ };
+
+ sata_phy: sata-phy@8100 {
+ compatible = "brcm,bcm63138-sata-phy", "brcm,phy-sata3";
+ reg = <0x8100 0x1e00>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+ };
};
/* Legacy UBUS base */
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
index f9dd342..21479b4 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -39,10 +39,6 @@
model = "NorthStar Plus SVK (BCM958522ER)";
compatible = "brcm,bcm58522", "brcm,nsp";
- aliases {
- serial0 = &uart0;
- };
-
chosen {
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
index 374508a..cda3d79 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -39,10 +39,6 @@
model = "NorthStar Plus SVK (BCM958525ER)";
compatible = "brcm,bcm58525", "brcm,nsp";
- aliases {
- serial0 = &uart0;
- };
-
chosen {
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index 403250c5..f866498 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -39,10 +39,6 @@
model = "NorthStar Plus XMC (BCM958525xmc)";
compatible = "brcm,bcm58525", "brcm,nsp";
- aliases {
- serial0 = &uart0;
- };
-
chosen {
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
index ecd05e2..df60602 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -39,10 +39,6 @@
model = "NorthStar Plus SVK (BCM958622HR)";
compatible = "brcm,bcm58622", "brcm,nsp";
- aliases {
- serial0 = &uart0;
- };
-
chosen {
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index f5e85b3..3893e7a 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -39,10 +39,6 @@
model = "NorthStar Plus SVK (BCM958623HR)";
compatible = "brcm,bcm58623", "brcm,nsp";
- aliases {
- serial0 = &uart0;
- };
-
chosen {
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index a53a2f6..cf226b0 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -39,10 +39,6 @@
model = "NorthStar Plus SVK (BCM958625HR)";
compatible = "brcm,bcm58625", "brcm,nsp";
- aliases {
- serial0 = &uart0;
- };
-
chosen {
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 3ea5f73..10b3d512 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -38,11 +38,6 @@
model = "NorthStar Plus SVK (BCM958625K)";
compatible = "brcm,bcm58625", "brcm,nsp";
- aliases {
- serial0 = &uart0;
- serial1 = &uart1;
- };
-
chosen {
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts
index c616736..8dca97e 100644
--- a/arch/arm/boot/dts/bcm963138dvt.dts
+++ b/arch/arm/boot/dts/bcm963138dvt.dts
@@ -41,3 +41,11 @@
brcm,nand-oob-sectors-size = <16>;
};
};
+
+&ahci {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
index ea9a080..e39db14 100644
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -39,10 +39,6 @@
model = "NorthStar Plus SVK (BCM988312HR)";
compatible = "brcm,bcm88312", "brcm,nsp";
- aliases {
- serial0 = &uart0;
- };
-
chosen {
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index 373ea87..67d8601 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the EMEV2 SoC
+ * Device Tree Source for the Emma Mobile EV2 SoC
*
* Copyright (C) 2012 Renesas Solutions Corp.
*/
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 7c22cbf..ace50e1 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -36,11 +36,13 @@
cooling-maps {
map0 {
/* Corresponds to 500MHz */
- cooling-device = <&cpu0 5 5>;
+ cooling-device = <&cpu0 5 5>,
+ <&cpu1 5 5>;
};
map1 {
/* Corresponds to 200MHz */
- cooling-device = <&cpu0 8 8>;
+ cooling-device = <&cpu0 8 8>,
+ <&cpu1 8 8>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 6ffedf4..e257655 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -121,11 +121,13 @@
cooling-maps {
map0 {
/* Correspond to 500MHz at freq_table */
- cooling-device = <&cpu0 5 5>;
+ cooling-device = <&cpu0 5 5>,
+ <&cpu1 5 5>;
};
map1 {
/* Correspond to 200MHz at freq_table */
- cooling-device = <&cpu0 8 8>;
+ cooling-device = <&cpu0 8 8>,
+ <&cpu1 8 8>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 2a6b828c..7479993 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -116,11 +116,13 @@
cooling-maps {
map0 {
/* Corresponds to 500MHz */
- cooling-device = <&cpu0 5 5>;
+ cooling-device = <&cpu0 5 5>,
+ <&cpu1 5 5>;
};
map1 {
/* Corresponds to 200MHz */
- cooling-device = <&cpu0 8 8>;
+ cooling-device = <&cpu0 8 8>,
+ <&cpu1 8 8>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 27a1ee2..608d174 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -357,7 +357,7 @@
};
hsotg: hsotg@12480000 {
- compatible = "snps,dwc2";
+ compatible = "samsung,s3c6400-hsotg", "snps,dwc2";
reg = <0x12480000 0x20000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_USBOTG>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index f9bbc63..8dbc47d 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -138,11 +138,11 @@
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
- cooling-device = <&cpu0 2 2>;
+ cooling-device = <&cpu0 2 2>, <&cpu1 2 2>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
- cooling-device = <&cpu0 4 4>;
+ cooling-device = <&cpu0 4 4>, <&cpu1 4 4>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index b6091c2..b491c34 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -51,7 +51,7 @@
#cooling-cells = <2>; /* min followed by max */
};
- cpu@901 {
+ cpu1: cpu@901 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x901>;
@@ -298,6 +298,7 @@
opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1150000>;
+ opp-suspend;
};
};
@@ -367,6 +368,7 @@
};
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
+ opp-suspend;
};
};
};
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
index ab7affa..0038465 100644
--- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -45,11 +45,15 @@
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
- cooling-device = <&cpu0 7 7>;
+ cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+ <&cpu2 7 7>, <&cpu3 7 7>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
- cooling-device = <&cpu0 13 13>;
+ cooling-device = <&cpu0 13 13>,
+ <&cpu1 13 13>,
+ <&cpu2 13 13>,
+ <&cpu3 13 13>;
};
};
};
@@ -446,6 +450,7 @@
};
s5m8767_osc: clocks {
+ compatible = "samsung,s5m8767-clk";
#clock-cells = <1>;
clock-output-names = "s5m8767_ap",
"s5m8767_cp", "s5m8767_bt";
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index aed2f2e..4c15cb6 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -267,11 +267,15 @@
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
- cooling-device = <&cpu0 7 7>;
+ cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+ <&cpu2 7 7>, <&cpu3 7 7>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
- cooling-device = <&cpu0 13 13>;
+ cooling-device = <&cpu0 13 13>,
+ <&cpu1 13 13>,
+ <&cpu2 13 13>,
+ <&cpu3 13 13>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 2caa313..3a9eb1e 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -72,11 +72,15 @@
cooling-maps {
cooling_map0: map0 {
/* Corresponds to 800MHz at freq_table */
- cooling-device = <&cpu0 7 7>;
+ cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+ <&cpu2 7 7>, <&cpu3 7 7>;
};
cooling_map1: map1 {
/* Corresponds to 200MHz at freq_table */
- cooling-device = <&cpu0 13 13>;
+ cooling-device = <&cpu0 13 13>,
+ <&cpu1 13 13>,
+ <&cpu2 13 13>,
+ <&cpu3 13 13>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index 459919b..2bdf899 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -45,24 +45,22 @@
cooling-maps {
map0 {
trip = <&cpu_alert1>;
- cooling-device = <&cpu0 9 9>;
+ cooling-device = <&cpu0 9 9>, <&cpu1 9 9>,
+ <&cpu2 9 9>, <&cpu3 9 9>,
+ <&fan0 1 2>;
};
map1 {
trip = <&cpu_alert2>;
- cooling-device = <&cpu0 15 15>;
+ cooling-device = <&cpu0 15 15>,
+ <&cpu1 15 15>,
+ <&cpu2 15 15>,
+ <&cpu3 15 15>,
+ <&fan0 2 3>;
};
map2 {
trip = <&cpu_alert0>;
cooling-device = <&fan0 0 1>;
};
- map3 {
- trip = <&cpu_alert1>;
- cooling-device = <&fan0 1 2>;
- };
- map4 {
- trip = <&cpu_alert2>;
- cooling-device = <&fan0 2 3>;
- };
};
};
};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 51f72f0..26ad6ab 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -45,7 +45,7 @@
#cooling-cells = <2>; /* min followed by max */
};
- cpu@a01 {
+ cpu1: cpu@a01 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA01>;
@@ -55,7 +55,7 @@
#cooling-cells = <2>; /* min followed by max */
};
- cpu@a02 {
+ cpu2: cpu@a02 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA02>;
@@ -65,7 +65,7 @@
#cooling-cells = <2>; /* min followed by max */
};
- cpu@a03 {
+ cpu3: cpu@a03 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA03>;
@@ -432,6 +432,7 @@
opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1050000>;
+ opp-suspend;
};
};
@@ -520,6 +521,7 @@
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <1000000>;
+ opp-suspend;
};
};
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 7d1f2dc..2ca9319 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -10,6 +10,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
#include "exynos5250.dtsi"
/ {
@@ -180,31 +181,6 @@
};
};
-&dp {
- status = "okay";
- samsung,color-space = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <4>;
-
- display-timings {
- native-mode = <&timing0>;
-
- timing0: timing {
- /* 2560x1600 DP panel */
- clock-frequency = <50000>;
- hactive = <2560>;
- vactive = <1600>;
- hfront-porch = <48>;
- hback-porch = <80>;
- hsync-len = <32>;
- vback-porch = <16>;
- vfront-porch = <8>;
- vsync-len = <6>;
- };
- };
-};
-
&fimd {
status = "okay";
};
@@ -264,6 +240,12 @@
<&gpx2 4 GPIO_ACTIVE_HIGH>,
<&gpx2 5 GPIO_ACTIVE_HIGH>;
+ s5m8767_osc: clocks {
+ compatible = "samsung,s5m8767-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s5m8767_ap", "unused1", "unused2";
+ };
+
regulators {
ldo1_reg: LDO1 {
regulator-name = "VDD_ALIVE_1.0V";
@@ -601,6 +583,8 @@
};
&rtc {
+ clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 5044f75..80986b9 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -59,7 +59,7 @@
operating-points-v2 = <&cpu0_opp_table>;
#cooling-cells = <2>; /* min followed by max */
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <1>;
@@ -1087,11 +1087,12 @@
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
- cooling-device = <&cpu0 9 9>;
+ cooling-device = <&cpu0 9 9>, <&cpu1 9 9>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
- cooling-device = <&cpu0 15 15>;
+ cooling-device = <&cpu0 15 15>,
+ <&cpu1 15 15>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index cdda614..3447160 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -89,6 +89,7 @@
pinctrl-0 = <&s2mps11_irq>;
s2mps11_osc: clocks {
+ compatible = "samsung,s2mps11-clk";
#clock-cells = <1>;
clock-output-names = "s2mps11_ap",
"s2mps11_cp", "s2mps11_bt";
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index dda8ca2..b82af7c 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -289,6 +289,13 @@
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
+
+ sd2_wp: sd2-wp {
+ samsung,pins = "gpc4-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+ };
};
&pinctrl_2 {
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 831c7336..3cf9050 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -141,6 +141,7 @@
reg = <0x66>;
s2mps11_osc: clocks {
+ compatible = "samsung,s2mps11-clk";
#clock-cells = <1>;
clock-output-names = "s2mps11_ap",
"s2mps11_cp", "s2mps11_bt";
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 2fac4ba..bf09eab 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Hardkernel Odroid XU3/XU4/HC1 boards core device tree source
+ * Hardkernel Odroid XU3/XU3-Lite/XU4/HC1 boards core device tree source
*
* Copyright (c) 2017 Marek Szyprowski
* Copyright (c) 2013-2017 Samsung Electronics Co., Ltd.
@@ -141,6 +141,7 @@
pinctrl-0 = <&s2mps11_irq>;
s2mps11_osc: clocks {
+ compatible = "samsung,s2mps11-clk";
#clock-cells = <1>;
clock-output-names = "s2mps11_ap",
"s2mps11_cp", "s2mps11_bt";
@@ -231,7 +232,7 @@
ldo13_reg: LDO13 {
regulator-name = "vddq_mmc2";
- regulator-min-microvolt = <2800000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2800000>;
};
@@ -498,11 +499,15 @@
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_wp &sd2_bus1 &sd2_bus4>;
bus-width = <4>;
cap-sd-highspeed;
+ max-frequency = <200000000>;
vmmc-supply = <&ldo19_reg>;
vqmmc-supply = <&ldo13_reg>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ sd-uhs-ddr50;
};
&nocp_mem0_0 {
diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index 8f332be..d271e75 100644
--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -56,24 +56,30 @@
*/
map0 {
trip = <&cpu0_alert0>;
- cooling-device = <&cpu0 0 2>;
- };
- map1 {
- trip = <&cpu0_alert0>;
- cooling-device = <&cpu4 0 2>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
};
/*
* When reaching cpu0_alert1, reduce CPU
* further, down to 600 MHz (12 steps for big,
* 7 steps for LITTLE).
*/
- map2 {
+ map1 {
trip = <&cpu0_alert1>;
- cooling-device = <&cpu0 3 7>;
- };
- map3 {
- trip = <&cpu0_alert1>;
- cooling-device = <&cpu4 3 12>;
+ cooling-device = <&cpu0 3 7>,
+ <&cpu1 3 7>,
+ <&cpu2 3 7>,
+ <&cpu3 3 7>,
+ <&cpu4 3 12>,
+ <&cpu5 3 12>,
+ <&cpu6 3 12>,
+ <&cpu7 3 12>;
};
};
};
@@ -99,19 +105,25 @@
cooling-maps {
map0 {
trip = <&cpu1_alert0>;
- cooling-device = <&cpu0 0 2>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
};
map1 {
- trip = <&cpu1_alert0>;
- cooling-device = <&cpu4 0 2>;
- };
- map2 {
trip = <&cpu1_alert1>;
- cooling-device = <&cpu0 3 7>;
- };
- map3 {
- trip = <&cpu1_alert1>;
- cooling-device = <&cpu4 3 12>;
+ cooling-device = <&cpu0 3 7>,
+ <&cpu1 3 7>,
+ <&cpu2 3 7>,
+ <&cpu3 3 7>,
+ <&cpu4 3 12>,
+ <&cpu5 3 12>,
+ <&cpu6 3 12>,
+ <&cpu7 3 12>;
};
};
};
@@ -137,19 +149,25 @@
cooling-maps {
map0 {
trip = <&cpu2_alert0>;
- cooling-device = <&cpu0 0 2>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
};
map1 {
- trip = <&cpu2_alert0>;
- cooling-device = <&cpu4 0 2>;
- };
- map2 {
trip = <&cpu2_alert1>;
- cooling-device = <&cpu0 3 7>;
- };
- map3 {
- trip = <&cpu2_alert1>;
- cooling-device = <&cpu4 3 12>;
+ cooling-device = <&cpu0 3 7>,
+ <&cpu1 3 7>,
+ <&cpu2 3 7>,
+ <&cpu3 3 7>,
+ <&cpu4 3 12>,
+ <&cpu5 3 12>,
+ <&cpu6 3 12>,
+ <&cpu7 3 12>;
};
};
};
@@ -175,19 +193,25 @@
cooling-maps {
map0 {
trip = <&cpu3_alert0>;
- cooling-device = <&cpu0 0 2>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
};
map1 {
- trip = <&cpu3_alert0>;
- cooling-device = <&cpu4 0 2>;
- };
- map2 {
trip = <&cpu3_alert1>;
- cooling-device = <&cpu0 3 7>;
- };
- map3 {
- trip = <&cpu3_alert1>;
- cooling-device = <&cpu4 3 12>;
+ cooling-device = <&cpu0 3 7>,
+ <&cpu1 3 7>,
+ <&cpu2 3 7>,
+ <&cpu3 3 7>,
+ <&cpu4 3 12>,
+ <&cpu5 3 12>,
+ <&cpu6 3 12>,
+ <&cpu7 3 12>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index e522edb..b299e54 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Hardkernel Odroid XU3 board device tree source
+ * Hardkernel Odroid XU3/XU3-Lite/XU4 boards common device tree source
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
@@ -113,24 +113,30 @@
*/
map3 {
trip = <&cpu0_alert3>;
- cooling-device = <&cpu0 0 2>;
- };
- map4 {
- trip = <&cpu0_alert3>;
- cooling-device = <&cpu4 0 2>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
};
/*
* When reaching cpu0_alert4, reduce CPU
* further, down to 600 MHz (12 steps for big,
* 7 steps for LITTLE).
*/
- map5 {
+ map4 {
trip = <&cpu0_alert4>;
- cooling-device = <&cpu0 3 7>;
- };
- map6 {
- trip = <&cpu0_alert4>;
- cooling-device = <&cpu4 3 12>;
+ cooling-device = <&cpu0 3 7>,
+ <&cpu1 3 7>,
+ <&cpu2 3 7>,
+ <&cpu3 3 7>,
+ <&cpu4 3 12>,
+ <&cpu5 3 12>,
+ <&cpu6 3 12>,
+ <&cpu7 3 12>;
};
};
};
@@ -185,19 +191,25 @@
};
map3 {
trip = <&cpu1_alert3>;
- cooling-device = <&cpu0 0 2>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
};
map4 {
- trip = <&cpu1_alert3>;
- cooling-device = <&cpu4 0 2>;
- };
- map5 {
trip = <&cpu1_alert4>;
- cooling-device = <&cpu0 3 7>;
- };
- map6 {
- trip = <&cpu1_alert4>;
- cooling-device = <&cpu4 3 12>;
+ cooling-device = <&cpu0 3 7>,
+ <&cpu1 3 7>,
+ <&cpu2 3 7>,
+ <&cpu3 3 7>,
+ <&cpu4 3 12>,
+ <&cpu5 3 12>,
+ <&cpu6 3 12>,
+ <&cpu7 3 12>;
};
};
};
@@ -252,19 +264,25 @@
};
map3 {
trip = <&cpu2_alert3>;
- cooling-device = <&cpu0 0 2>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
};
map4 {
- trip = <&cpu2_alert3>;
- cooling-device = <&cpu4 0 2>;
- };
- map5 {
trip = <&cpu2_alert4>;
- cooling-device = <&cpu0 3 7>;
- };
- map6 {
- trip = <&cpu2_alert4>;
- cooling-device = <&cpu4 3 12>;
+ cooling-device = <&cpu0 3 7>,
+ <&cpu1 3 7>,
+ <&cpu2 3 7>,
+ <&cpu3 3 7>,
+ <&cpu4 3 12>,
+ <&cpu5 3 12>,
+ <&cpu6 3 12>,
+ <&cpu7 3 12>;
};
};
};
@@ -319,19 +337,25 @@
};
map3 {
trip = <&cpu3_alert3>;
- cooling-device = <&cpu0 0 2>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
};
map4 {
- trip = <&cpu3_alert3>;
- cooling-device = <&cpu4 0 2>;
- };
- map5 {
trip = <&cpu3_alert4>;
- cooling-device = <&cpu0 3 7>;
- };
- map6 {
- trip = <&cpu3_alert4>;
- cooling-device = <&cpu4 3 12>;
+ cooling-device = <&cpu0 3 7>,
+ <&cpu1 3 7>,
+ <&cpu2 3 7>,
+ <&cpu3 3 7>,
+ <&cpu4 3 12>,
+ <&cpu5 3 12>,
+ <&cpu6 3 12>,
+ <&cpu7 3 12>;
};
};
};
@@ -392,6 +416,7 @@
cap-mmc-highspeed;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
+ max-frequency = <200000000>;
vmmc-supply = <&ldo18_reg>;
vqmmc-supply = <&ldo3_reg>;
};
diff --git a/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi b/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi
new file mode 100644
index 0000000..87bb8b5
--- /dev/null
+++ b/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+
+partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u-boot@0 {
+ reg = <0x0 0x60000>;
+ label = "u-boot";
+ };
+
+ u-boot-env@60000 {
+ reg = <0x60000 0x20000>;
+ label = "env";
+ };
+
+ fit@80000 {
+ reg = <0x80000 0x1b80000>;
+ label = "fit";
+ };
+
+ /*
+ * "data0" partition is used by several Facebook BMC platforms
+ * as persistent data store.
+ */
+ data0@1c00000 {
+ reg = <0x1c00000 0x400000>;
+ label = "data0";
+ };
+
+ /*
+ * Although the master partition can be created by enabling
+ * MTD_PARTITIONED_MASTER option, below "flash0" partition is
+ * explicitly created to avoid breaking legacy applications.
+ */
+ flash0@0 {
+ reg = <0x0 0x2000000>;
+ label = "flash0";
+ };
+};
diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts
index a1d81ba..119b19b 100644
--- a/arch/arm/boot/dts/imx1-ads.dts
+++ b/arch/arm/boot/dts/imx1-ads.dts
@@ -21,6 +21,7 @@
};
memory@8000000 {
+ device_type = "memory";
reg = <0x08000000 0x04000000>;
};
};
diff --git a/arch/arm/boot/dts/imx1-apf9328.dts b/arch/arm/boot/dts/imx1-apf9328.dts
index 11515c0..ee4b1b1 100644
--- a/arch/arm/boot/dts/imx1-apf9328.dts
+++ b/arch/arm/boot/dts/imx1-apf9328.dts
@@ -21,6 +21,7 @@
};
memory@8000000 {
+ device_type = "memory";
reg = <0x08000000 0x00800000>;
};
};
diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi
index b00ece1..b30448c 100644
--- a/arch/arm/boot/dts/imx1.dtsi
+++ b/arch/arm/boot/dts/imx1.dtsi
@@ -15,10 +15,8 @@
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
- * Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; };
aliases {
gpio0 = &gpio1;
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index 98efe1a..0b2701c 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -10,6 +10,7 @@
compatible = "fsl,imx23-evk", "fsl,imx23";
memory@40000000 {
+ device_type = "memory";
reg = <0x40000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index 31b1e35..e2bac4d 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -20,6 +20,7 @@
compatible = "olimex,imx23-olinuxino", "fsl,imx23";
memory@40000000 {
+ device_type = "memory";
reg = <0x40000000 0x04000000>;
};
diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/imx23-sansa.dts
index faf701b..46057d9 100644
--- a/arch/arm/boot/dts/imx23-sansa.dts
+++ b/arch/arm/boot/dts/imx23-sansa.dts
@@ -50,6 +50,7 @@
compatible = "sandisk,sansa_fuze_plus", "fsl,imx23";
memory@40000000 {
+ device_type = "memory";
reg = <0x40000000 0x04000000>;
};
diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
index 2ff6cdf..df2a9e64 100644
--- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts
+++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
@@ -17,6 +17,7 @@
compatible = "fsl,stmp378x-devb", "fsl,imx23";
memory@40000000 {
+ device_type = "memory";
reg = <0x40000000 0x04000000>;
};
diff --git a/arch/arm/boot/dts/imx23-xfi3.dts b/arch/arm/boot/dts/imx23-xfi3.dts
index db53089..a6213c5 100644
--- a/arch/arm/boot/dts/imx23-xfi3.dts
+++ b/arch/arm/boot/dts/imx23-xfi3.dts
@@ -49,6 +49,7 @@
compatible = "creative,x-fi3", "fsl,imx23";
memory@40000000 {
+ device_type = "memory";
reg = <0x40000000 0x04000000>;
};
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index ea25992..8257630 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -13,10 +13,8 @@
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
- * Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; };
aliases {
gpio0 = &gpio0;
diff --git a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
index e316fe0..e4d7da2 100644
--- a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
+++ b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
@@ -18,6 +18,7 @@
compatible = "eukrea,cpuimx25", "fsl,imx25";
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x4000000>; /* 64M */
};
};
diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts
index 5cb69678..f37e9a7 100644
--- a/arch/arm/boot/dts/imx25-karo-tx25.dts
+++ b/arch/arm/boot/dts/imx25-karo-tx25.dts
@@ -37,6 +37,7 @@
};
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
};
};
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
index a5626b4..f8544a9 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -12,6 +12,7 @@
compatible = "fsl,imx25-pdk", "fsl,imx25";
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x4000000>;
};
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index b25309d2..9a097ef 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -12,10 +12,8 @@
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
- * Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; };
aliases {
ethernet0 = &fec;
@@ -388,12 +386,16 @@
epit1: timer@53f94000 {
compatible = "fsl,imx25-epit";
reg = <0x53f94000 0x4000>;
+ clocks = <&clks 83>, <&clks 43>;
+ clock-names = "ipg", "per";
interrupts = <28>;
};
epit2: timer@53f98000 {
compatible = "fsl,imx25-epit";
reg = <0x53f98000 0x4000>;
+ clocks = <&clks 84>, <&clks 43>;
+ clock-names = "ipg", "per";
interrupts = <27>;
};
diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts
index 3eddd80..f635d5c 100644
--- a/arch/arm/boot/dts/imx27-apf27.dts
+++ b/arch/arm/boot/dts/imx27-apf27.dts
@@ -20,6 +20,7 @@
compatible = "armadeus,imx27-apf27", "fsl,imx27";
memory@a0000000 {
+ device_type = "memory";
reg = <0xa0000000 0x04000000>;
};
};
diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
index 9c455dc..c85f9d0 100644
--- a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
+++ b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
@@ -17,6 +17,7 @@
compatible = "eukrea,cpuimx27", "fsl,imx27";
memory@a0000000 {
+ device_type = "memory";
reg = <0xa0000000 0x04000000>;
};
diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts
index f9a882d..35123b7 100644
--- a/arch/arm/boot/dts/imx27-pdk.dts
+++ b/arch/arm/boot/dts/imx27-pdk.dts
@@ -10,6 +10,7 @@
compatible = "fsl,imx27-pdk", "fsl,imx27";
memory@a0000000 {
+ device_type = "memory";
reg = <0xa0000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
index cbad7c88..b0b4f7c 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
@@ -18,6 +18,7 @@
compatible = "phytec,imx27-pca100", "fsl,imx27";
memory@a0000000 {
+ device_type = "memory";
reg = <0xa0000000 0x08000000>; /* 128MB */
};
};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
index ec466b4..0935e14 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
@@ -17,6 +17,7 @@
compatible = "phytec,imx27-pcm038", "fsl,imx27";
memory@a0000000 {
+ device_type = "memory";
reg = <0xa0000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 151b0eb..26ff5d4 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -16,10 +16,8 @@
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
- * Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; };
aliases {
ethernet0 = &fec;
diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts
index bab78346..b6976fb 100644
--- a/arch/arm/boot/dts/imx28-apf28.dts
+++ b/arch/arm/boot/dts/imx28-apf28.dts
@@ -17,6 +17,7 @@
compatible = "armadeus,imx28-apf28", "fsl,imx28";
memory@40000000 {
+ device_type = "memory";
reg = <0x40000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index 6c9b498..3a184d1 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -7,6 +7,7 @@
compatible = "bluegiga,apx4devkit", "fsl,imx28";
memory@40000000 {
+ device_type = "memory";
reg = <0x40000000 0x04000000>;
};
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index 8337ca2..d3e3622 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -17,6 +17,7 @@
compatible = "crystalfontz,cfa10036", "fsl,imx28";
memory@40000000 {
+ device_type = "memory";
reg = <0x40000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts
index f4f2b3d..19957c2 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2-485.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2-485.dts
@@ -20,6 +20,7 @@
compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28";
memory@40000000 {
+ device_type = "memory";
reg = <0x40000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
index 71d0fcb..49821313 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
@@ -21,6 +21,7 @@
compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28";
memory@40000000 {
+ device_type = "memory";
reg = <0x40000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
index 6580ec6..d38d35b 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
@@ -24,6 +24,7 @@
};
memory@40000000 {
+ device_type = "memory";
reg = <0x40000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts
index 693634ed..38160fb 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2.dts
@@ -20,6 +20,7 @@
compatible = "i2se,duckbill-2", "fsl,imx28";
memory@40000000 {
+ device_type = "memory";
reg = <0x40000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts
index 16f5244..7139c07 100644
--- a/arch/arm/boot/dts/imx28-duckbill.dts
+++ b/arch/arm/boot/dts/imx28-duckbill.dts
@@ -19,6 +19,7 @@
compatible = "i2se,duckbill", "fsl,imx28";
memory@40000000 {
+ device_type = "memory";
reg = <0x40000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
index b70f3349..28dab6d 100644
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
@@ -24,6 +24,7 @@
compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
memory@40000000 {
+ device_type = "memory";
reg = <0x40000000 0x04000000>;
};
};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
index 65efb78..7c3d552 100644
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
@@ -23,6 +23,7 @@
compatible = "eukrea,mbmx287lc", "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
memory@40000000 {
+ device_type = "memory";
reg = <0x40000000 0x08000000>;
};
};
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 5778300..96c1d10 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -10,6 +10,7 @@
compatible = "fsl,imx28-evk", "fsl,imx28";
memory@40000000 {
+ device_type = "memory";
reg = <0x40000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi
index 0ec415e..298ad28 100644
--- a/arch/arm/boot/dts/imx28-m28.dtsi
+++ b/arch/arm/boot/dts/imx28-m28.dtsi
@@ -16,6 +16,7 @@
compatible = "aries,m28", "denx,m28", "fsl,imx28";
memory@40000000 {
+ device_type = "memory";
reg = <0x40000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
index 8883d36..ece3310 100644
--- a/arch/arm/boot/dts/imx28-m28cu3.dts
+++ b/arch/arm/boot/dts/imx28-m28cu3.dts
@@ -17,6 +17,7 @@
compatible = "msr,m28cu3", "fsl,imx28";
memory@40000000 {
+ device_type = "memory";
reg = <0x40000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 893886d..7d64301 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -1,4 +1,5 @@
/*
+
* Copyright (C) 2012 Marek Vasut <[email protected]>
*
* The code contained herein is licensed under the GNU General Public
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
index ea9212f..42c88a6 100644
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -17,6 +17,7 @@
compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
memory@40000000 {
+ device_type = "memory";
reg = <0x40000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts
index dccdd6b..e3fd411 100644
--- a/arch/arm/boot/dts/imx28-ts4600.dts
+++ b/arch/arm/boot/dts/imx28-ts4600.dts
@@ -20,6 +20,7 @@
compatible = "technologic,imx28-ts4600", "fsl,imx28";
memory@40000000 {
+ device_type = "memory";
reg = <0x40000000 0x10000000>; /* 256MB */
};
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index b8f4643..164254c 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -66,6 +66,7 @@
};
memory@40000000 {
+ device_type = "memory";
reg = <0x40000000 0>; /* will be filled in by U-Boot */
};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 2b7efb6..e14d8ef 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -14,10 +14,8 @@
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
- * Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; };
aliases {
ethernet0 = &mac0;
diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts
index 6ee4ff8..9eb960c 100644
--- a/arch/arm/boot/dts/imx31-bug.dts
+++ b/arch/arm/boot/dts/imx31-bug.dts
@@ -17,6 +17,7 @@
compatible = "buglabs,imx31-bug", "fsl,imx31";
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x8000000>; /* 128M */
};
};
diff --git a/arch/arm/boot/dts/imx31-lite.dts b/arch/arm/boot/dts/imx31-lite.dts
index db52ddc..d17abdfb 100644
--- a/arch/arm/boot/dts/imx31-lite.dts
+++ b/arch/arm/boot/dts/imx31-lite.dts
@@ -18,6 +18,7 @@
};
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x8000000>;
};
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
index af7afcc..d7f6fb7 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -10,10 +10,8 @@
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
- * Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; };
aliases {
gpio0 = &gpio1;
diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
index ba39d93..5f8a47a 100644
--- a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
+++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
@@ -18,6 +18,7 @@
compatible = "eukrea,cpuimx35", "fsl,imx35";
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x8000000>; /* 128M */
};
};
diff --git a/arch/arm/boot/dts/imx35-pdk.dts b/arch/arm/boot/dts/imx35-pdk.dts
index df613e8..ddce0a8 100644
--- a/arch/arm/boot/dts/imx35-pdk.dts
+++ b/arch/arm/boot/dts/imx35-pdk.dts
@@ -11,6 +11,7 @@
compatible = "fsl,imx35-pdk", "fsl,imx35";
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x8000000>,
<0x90000000 0x8000000>;
};
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index a1c3d28..59cadee 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -13,10 +13,8 @@
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
- * Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; };
aliases {
ethernet0 = &fec;
diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts
index 682a997..a25da41 100644
--- a/arch/arm/boot/dts/imx50-evk.dts
+++ b/arch/arm/boot/dts/imx50-evk.dts
@@ -12,6 +12,7 @@
compatible = "fsl,imx50-evk", "fsl,imx50";
memory@70000000 {
+ device_type = "memory";
reg = <0x70000000 0x80000000>;
};
};
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index 95b7fba..ee1e3e8 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -1,15 +1,8 @@
-/*
- * Copyright 2013 Greg Ungerer <[email protected]>
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013 Greg Ungerer <[email protected]>
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
#include "imx50-pinfunc.h"
#include <dt-bindings/gpio/gpio.h>
@@ -22,10 +15,8 @@
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
- * Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; };
aliases {
ethernet0 = &fec;
diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts
index 79d8003..1eddf29 100644
--- a/arch/arm/boot/dts/imx51-apf51.dts
+++ b/arch/arm/boot/dts/imx51-apf51.dts
@@ -22,6 +22,7 @@
compatible = "armadeus,imx51-apf51", "fsl,imx51";
memory@90000000 {
+ device_type = "memory";
reg = <0x90000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 35ee1b4..ed6a3ce 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -15,6 +15,7 @@
};
memory@90000000 {
+ device_type = "memory";
reg = <0x90000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
index 5761a66..82d8df0 100644
--- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
+++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
@@ -17,6 +17,7 @@
compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51";
memory@90000000 {
+ device_type = "memory";
reg = <0x90000000 0x08000000>;
};
};
diff --git a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
index f8902a3..2e31253 100644
--- a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
+++ b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
@@ -23,6 +23,7 @@
compatible = "eukrea,cpuimx51", "fsl,imx51";
memory@90000000 {
+ device_type = "memory";
reg = <0x90000000 0x10000000>; /* 256M */
};
};
diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts
index 39eb067..4344632 100644
--- a/arch/arm/boot/dts/imx51-ts4800.dts
+++ b/arch/arm/boot/dts/imx51-ts4800.dts
@@ -18,6 +18,7 @@
};
memory@90000000 {
+ device_type = "memory";
reg = <0x90000000 0x10000000>;
};
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
index e45a15c..a8220f0 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -53,6 +53,7 @@
/* Will be filled by the bootloader */
memory@90000000 {
+ device_type = "memory";
reg = <0x90000000 0>;
};
@@ -477,6 +478,15 @@
};
&gpio1 {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "", "hp-amp-shutdown-b", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
+
unused-sd3-wp-gpio {
/*
* See pinctrl_esdhc1 below for more details on this
@@ -492,18 +502,9 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- eeprom@50 {
- compatible = "atmel,24c04";
- pagesize = <16>;
- reg = <0x50>;
- };
-
hpa1: amp@60 {
compatible = "ti,tpa6130a2";
reg = <0x60>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ampgpio>;
- power-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
Vdd-supply = <®_3p3v>;
};
@@ -677,7 +678,10 @@
};
&iomuxc {
- pinctrl_ampgpio: ampgpiogrp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
fsl,pins = <
MX51_PAD_GPIO1_9__GPIO1_9 0x5e
>;
diff --git a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
index 243d1c8..aa91e5d 100644
--- a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
+++ b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
@@ -18,6 +18,7 @@
/* Will be filled by the bootloader */
memory@90000000 {
+ device_type = "memory";
reg = <0x90000000 0>;
};
diff --git a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
index 14b2077..875b10a 100644
--- a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
+++ b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
@@ -18,6 +18,7 @@
/* Will be filled by the bootloader */
memory@90000000 {
+ device_type = "memory";
reg = <0x90000000 0>;
};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 67d4627..a5ee25ce 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -16,10 +16,8 @@
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
- * Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; };
aliases {
ethernet0 = &fec;
@@ -123,6 +121,16 @@
reg = <0x1ffe0000 0x20000>;
};
+ gpu: gpu@30000000 {
+ compatible = "amd,imageon-200.1", "amd,imageon";
+ reg = <0x30000000 0x20000>;
+ reg-names = "kgsl_3d0_reg_memory";
+ interrupts = <12>;
+ interrupt-names = "kgsl_3d0_irq";
+ clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>;
+ clock-names = "core_clk", "mem_iface_clk";
+ };
+
ipu: ipu@40000000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index 117bd00..7d5a482 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -19,6 +19,7 @@
compatible = "fsl,imx53-ard", "fsl,imx53";
memory@70000000 {
+ device_type = "memory";
reg = <0x70000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx53-cx9020.dts b/arch/arm/boot/dts/imx53-cx9020.dts
index cf70ebc..c875e23 100644
--- a/arch/arm/boot/dts/imx53-cx9020.dts
+++ b/arch/arm/boot/dts/imx53-cx9020.dts
@@ -22,6 +22,7 @@
};
memory@70000000 {
+ device_type = "memory";
reg = <0x70000000 0x20000000>,
<0xb0000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi
index ce45f08..db2e5bc 100644
--- a/arch/arm/boot/dts/imx53-m53.dtsi
+++ b/arch/arm/boot/dts/imx53-m53.dtsi
@@ -16,6 +16,7 @@
compatible = "aries,imx53-m53", "denx,imx53-m53", "fsl,imx53";
memory@70000000 {
+ device_type = "memory";
reg = <0x70000000 0x20000000>,
<0xb0000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts
index b560ff8..5ff9a17 100644
--- a/arch/arm/boot/dts/imx53-ppd.dts
+++ b/arch/arm/boot/dts/imx53-ppd.dts
@@ -55,7 +55,7 @@
};
chosen {
- stdout-path = "&uart1:115200n8";
+ stdout-path = "serial0:115200n8";
};
memory@70000000 {
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index 50dde84..f00dda3 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -11,6 +11,7 @@
};
memory@70000000 {
+ device_type = "memory";
reg = <0x70000000 0x20000000>,
<0xb0000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index 462071c..09071ca 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -12,6 +12,7 @@
compatible = "fsl,imx53-smd", "fsl,imx53";
memory@70000000 {
+ device_type = "memory";
reg = <0x70000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index a72b898..c77d58f 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -17,6 +17,7 @@
compatible = "tq,tqma53", "fsl,imx53";
memory@70000000 {
+ device_type = "memory";
reg = <0x70000000 0x40000000>; /* Up to 1GiB */
};
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 54cf3e6..4ab1359 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -51,6 +51,7 @@
/* Will be filled by the bootloader */
memory@70000000 {
+ device_type = "memory";
reg = <0x70000000 0>;
};
diff --git a/arch/arm/boot/dts/imx53-usbarmory.dts b/arch/arm/boot/dts/imx53-usbarmory.dts
index f6268d0..ee6263d 100644
--- a/arch/arm/boot/dts/imx53-usbarmory.dts
+++ b/arch/arm/boot/dts/imx53-usbarmory.dts
@@ -58,6 +58,7 @@
};
memory@70000000 {
+ device_type = "memory";
reg = <0x70000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
index f83a8c6..d595034 100644
--- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
+++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
@@ -17,12 +17,8 @@
memory@70000000 {
device_type = "memory";
- reg = <0x70000000 0x20000000>;
- };
-
- memory@b0000000 {
- device_type = "memory";
- reg = <0xb0000000 0x20000000>;
+ reg = <0x70000000 0x20000000>,
+ <0xb0000000 0x20000000>;
};
regulators {
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 207eb55..b330030 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -1,14 +1,7 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
#include "imx53-pinfunc.h"
#include <dt-bindings/clock/imx5-clock.h>
@@ -23,10 +16,8 @@
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
- * Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; };
aliases {
ethernet0 = &fec;
@@ -209,6 +200,16 @@
};
};
+ gpu: gpu@30000000 {
+ compatible = "amd,imageon-200.0", "amd,imageon";
+ reg = <0x30000000 0x20000>;
+ reg-names = "kgsl_3d0_reg_memory";
+ interrupts = <12>;
+ interrupt-names = "kgsl_3d0_irq";
+ clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>;
+ clock-names = "core_clk", "mem_iface_clk";
+ };
+
aips@50000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6dl-apf6dev.dts b/arch/arm/boot/dts/imx6dl-apf6dev.dts
index 4a7f86d..6632e99 100644
--- a/arch/arm/boot/dts/imx6dl-apf6dev.dts
+++ b/arch/arm/boot/dts/imx6dl-apf6dev.dts
@@ -55,6 +55,7 @@
compatible = "armadeus,imx6dl-apf6dev", "armadeus,imx6dl-apf6", "fsl,imx6dl";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x20000000>;
};
};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
index 29940ba..b16603f 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
+++ b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
@@ -49,6 +49,7 @@
compatible = "fsl,imx6dl";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts
index 240f366..abb2a1b 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts
+++ b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts
@@ -49,6 +49,7 @@
compatible = "fsl,imx6dl";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
index ad77336..b87a85c 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
+++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
@@ -28,6 +28,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
index 64ed84e..e71ad90 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
+++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
@@ -17,6 +17,7 @@
compatible = "fsl,imx6dl";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
index d08e040..d5f7a17 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -55,6 +55,7 @@
/* Will be filled by the bootloader */
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0>;
};
diff --git a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts b/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts
index 89384cb..588286a 100644
--- a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts
+++ b/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts
@@ -23,6 +23,7 @@
/* Will be filled by the bootloader */
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0>;
};
};
diff --git a/arch/arm/boot/dts/imx6dl-emcon-avari.dts b/arch/arm/boot/dts/imx6dl-emcon-avari.dts
new file mode 100644
index 0000000..407ad8d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-emcon-avari.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (C) 2018 emtrion GmbH
+//
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-emcon.dtsi"
+#include "imx6qdl-emcon-avari.dtsi"
+
+/ {
+ model = "emtrion SoM emCON-MX6 Solo/Dual-Lite Avari";
+ compatible = "emtrion,emcon-mx6-avari", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts
index df8607f..385ce7b 100644
--- a/arch/arm/boot/dts/imx6dl-mamoj.dts
+++ b/arch/arm/boot/dts/imx6dl-mamoj.dts
@@ -13,6 +13,12 @@
model = "BTicino i.MX6DL Mamoj board";
compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl";
+ /* Will be filled by the bootloader */
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0>;
+ };
+
backlight_lcd: backlight-lcd {
compatible = "pwm-backlight";
pwms = <&pwm3 0 25000>; /* 25000ns -> 40kHz */
diff --git a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi
index 7d98889..d7e7299 100644
--- a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi
@@ -17,6 +17,7 @@
compatible = "phytec,imx6dl-pfla02", "fsl,imx6dl";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x20000000>;
};
};
diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts
index 3fb7f4e..853e58d 100644
--- a/arch/arm/boot/dts/imx6dl-rex-basic.dts
+++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts
@@ -17,6 +17,7 @@
compatible = "rex,imx6dl-rex-basic", "fsl,imx6dl";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x20000000>;
};
};
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 8e51491..65c184b 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -16,6 +16,7 @@
compatible = "riot,imx6s-riotboard", "fsl,imx6dl";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6dl-ts4900.dts b/arch/arm/boot/dts/imx6dl-ts4900.dts
index cc01a7a..3d60cc7 100644
--- a/arch/arm/boot/dts/imx6dl-ts4900.dts
+++ b/arch/arm/boot/dts/imx6dl-ts4900.dts
@@ -49,6 +49,7 @@
/* Will be filled by the bootloader */
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0>;
};
};
diff --git a/arch/arm/boot/dts/imx6dl-ts7970.dts b/arch/arm/boot/dts/imx6dl-ts7970.dts
index 82435d5..5da6feb 100644
--- a/arch/arm/boot/dts/imx6dl-ts7970.dts
+++ b/arch/arm/boot/dts/imx6dl-ts7970.dts
@@ -50,6 +50,7 @@
/* Will be filled by the bootloader */
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0>;
};
};
diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
index 738db4f..c2946fb 100644
--- a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
+++ b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
@@ -13,6 +13,7 @@
compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
};
diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts
index 51de6b4..6d1d863 100644
--- a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts
+++ b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts
@@ -13,6 +13,7 @@
compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
};
diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dts b/arch/arm/boot/dts/imx6dl-wandboard.dts
index b43454d..4a08d5a 100644
--- a/arch/arm/boot/dts/imx6dl-wandboard.dts
+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
@@ -13,6 +13,7 @@
compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
};
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index f0607eb..2ed1031 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -15,7 +15,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6q-apf6dev.dts b/arch/arm/boot/dts/imx6q-apf6dev.dts
index 5e72f81..07a36bb 100644
--- a/arch/arm/boot/dts/imx6q-apf6dev.dts
+++ b/arch/arm/boot/dts/imx6q-apf6dev.dts
@@ -55,6 +55,7 @@
compatible = "armadeus,imx6q-apf6dev", "armadeus,imx6q-apf6", "fsl,imx6q";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
};
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index 953a5b5..baadcb7 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -19,6 +19,7 @@
compatible = "fsl,imx6q-arm2", "fsl,imx6q";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x80000000>;
};
diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts
index 3ec5850..95b8f2d 100644
--- a/arch/arm/boot/dts/imx6q-b450v3.dts
+++ b/arch/arm/boot/dts/imx6q-b450v3.dts
@@ -98,13 +98,6 @@
line-name = "PCA9539-P04";
};
- P05 {
- gpio-hog;
- gpios = <5 0>;
- output-low;
- line-name = "PCA9539-P05";
- };
-
P07 {
gpio-hog;
gpios = <7 0>;
diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts
index 5650a9b1..611cb7a 100644
--- a/arch/arm/boot/dts/imx6q-b650v3.dts
+++ b/arch/arm/boot/dts/imx6q-b650v3.dts
@@ -91,13 +91,6 @@
};
&pca9539 {
- P05 {
- gpio-hog;
- gpios = <5 0>;
- output-low;
- line-name = "PCA9539-P05";
- };
-
P07 {
gpio-hog;
gpios = <7 0>;
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
index 044a5be..e4cb118f 100644
--- a/arch/arm/boot/dts/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/imx6q-b850v3.dts
@@ -209,6 +209,22 @@
};
};
+&pca9539 {
+ P10 {
+ gpio-hog;
+ gpios = <8 0>;
+ output-low;
+ line-name = "PCA9539-P10";
+ };
+
+ P11 {
+ gpio-hog;
+ gpios = <9 0>;
+ output-low;
+ line-name = "PCA9539-P11";
+ };
+};
+
&pci_root {
/* PLX Technology, Inc. PEX 8605 PCI Express 4-port Gen2 Switch */
bridge@1,0 {
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
index e903c48..adc9455 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -47,6 +47,7 @@
/ {
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index d3cba09..fa27dcd 100644
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -233,20 +233,6 @@
interrupt-parent = <&gpio2>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
- P10 {
- gpio-hog;
- gpios = <8 0>;
- output-low;
- line-name = "PCA9539-P10";
- };
-
- P11 {
- gpio-hog;
- gpios = <9 0>;
- output-low;
- line-name = "PCA9539-P11";
- };
-
P12 {
gpio-hog;
gpios = <10 0>;
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
index 18ae4f3..cab9e925 100644
--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -51,6 +51,7 @@
compatible = "compulab,cm-fx6", "fsl,imx6q";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x80000000>;
};
diff --git a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts b/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts
index ad12d76..e13acbb 100644
--- a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts
+++ b/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts
@@ -23,6 +23,7 @@
/* Will be filled by the bootloader */
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0>;
};
};
diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
index bbba067..387801d 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
@@ -19,6 +19,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi
index 85232c7..83524bb 100644
--- a/arch/arm/boot/dts/imx6q-display5.dtsi
+++ b/arch/arm/boot/dts/imx6q-display5.dtsi
@@ -48,6 +48,7 @@
compatible = "lwn,display5", "fsl,imx6q";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index b3c6a4a..ee8c38e 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -30,6 +30,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x80000000>;
};
diff --git a/arch/arm/boot/dts/imx6q-emcon-avari.dts b/arch/arm/boot/dts/imx6q-emcon-avari.dts
new file mode 100644
index 0000000..0f582a9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-emcon-avari.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (C) 2018 emtrion GmbH
+//
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-emcon.dtsi"
+#include "imx6qdl-emcon-avari.dtsi"
+
+/ {
+ model = "emtrion SoM emCON-MX6 Dual/Quad on Avari";
+ compatible = "emtrion,emcon-mx6-avari", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
index fcd257b..c63f371 100644
--- a/arch/arm/boot/dts/imx6q-evi.dts
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@@ -51,6 +51,7 @@
compatible = "uniwest,imx6q-evi", "fsl,imx6q";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
index 84d3540..ccc2487d 100644
--- a/arch/arm/boot/dts/imx6q-gk802.dts
+++ b/arch/arm/boot/dts/imx6q-gk802.dts
@@ -20,6 +20,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index a8f70b4..4038170 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -61,6 +61,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts
index 714e09e0..b8feadb 100644
--- a/arch/arm/boot/dts/imx6q-h100.dts
+++ b/arch/arm/boot/dts/imx6q-h100.dts
@@ -51,6 +51,7 @@
/* Will be filled by the bootloader */
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0>;
};
diff --git a/arch/arm/boot/dts/imx6q-kp-tpc.dts b/arch/arm/boot/dts/imx6q-kp-tpc.dts
index 302d8d0..50fbf46d 100644
--- a/arch/arm/boot/dts/imx6q-kp-tpc.dts
+++ b/arch/arm/boot/dts/imx6q-kp-tpc.dts
@@ -13,6 +13,7 @@
compatible = "kiebackpeter,imx6q-tpc", "fsl,imx6q";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
};
diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts
index dd763f20..d8ccb53 100644
--- a/arch/arm/boot/dts/imx6q-marsboard.dts
+++ b/arch/arm/boot/dts/imx6q-marsboard.dts
@@ -48,6 +48,7 @@
compatible = "embest,imx6q-marsboard", "fsl,imx6q";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts
index b7e9f38..74d9824 100644
--- a/arch/arm/boot/dts/imx6q-mccmon6.dts
+++ b/arch/arm/boot/dts/imx6q-mccmon6.dts
@@ -20,6 +20,7 @@
compatible = "lwn,mccmon6", "fsl,imx6q";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x80000000>;
};
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
index fcd824d..61347a5 100644
--- a/arch/arm/boot/dts/imx6q-novena.dts
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -57,6 +57,7 @@
/* Will be filled by the bootloader */
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0>;
};
diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
index fad858c..097f2c5 100644
--- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
@@ -17,6 +17,7 @@
compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x80000000>;
};
};
diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts
index a31e83c..5edf858 100644
--- a/arch/arm/boot/dts/imx6q-pistachio.dts
+++ b/arch/arm/boot/dts/imx6q-pistachio.dts
@@ -57,6 +57,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x80000000>;
};
diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts
index d6cae73..aa3004e 100644
--- a/arch/arm/boot/dts/imx6q-rex-pro.dts
+++ b/arch/arm/boot/dts/imx6q-rex-pro.dts
@@ -17,6 +17,7 @@
compatible = "rex,imx6q-rex-pro", "fsl,imx6q";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x80000000>;
};
};
diff --git a/arch/arm/boot/dts/imx6q-sbc6x.dts b/arch/arm/boot/dts/imx6q-sbc6x.dts
index b7aa2f0..3129f72 100644
--- a/arch/arm/boot/dts/imx6q-sbc6x.dts
+++ b/arch/arm/boot/dts/imx6q-sbc6x.dts
@@ -13,6 +13,7 @@
compatible = "microsys,sbc6x", "fsl,imx6q";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x80000000>;
};
};
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index 505cba7..279b15e9 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -60,6 +60,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x80000000>;
};
diff --git a/arch/arm/boot/dts/imx6q-ts4900.dts b/arch/arm/boot/dts/imx6q-ts4900.dts
index e655107..dce1e86 100644
--- a/arch/arm/boot/dts/imx6q-ts4900.dts
+++ b/arch/arm/boot/dts/imx6q-ts4900.dts
@@ -49,6 +49,7 @@
/* Will be filled by the bootloader */
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0>;
};
};
diff --git a/arch/arm/boot/dts/imx6q-ts7970.dts b/arch/arm/boot/dts/imx6q-ts7970.dts
index c615ac4f..570bd3c 100644
--- a/arch/arm/boot/dts/imx6q-ts7970.dts
+++ b/arch/arm/boot/dts/imx6q-ts7970.dts
@@ -50,6 +50,7 @@
/* Will be filled by the bootloader */
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0>;
};
};
diff --git a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
index be85b98..f6ccbec 100644
--- a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
+++ b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
@@ -13,6 +13,7 @@
compatible = "wand,imx6q-wandboard", "fsl,imx6q";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x80000000>;
};
};
diff --git a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts
index fcfba28..5533102 100644
--- a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts
+++ b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts
@@ -13,6 +13,7 @@
compatible = "wand,imx6q-wandboard", "fsl,imx6q";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x80000000>;
};
};
diff --git a/arch/arm/boot/dts/imx6q-wandboard.dts b/arch/arm/boot/dts/imx6q-wandboard.dts
index fa36fe18..0be548b 100644
--- a/arch/arm/boot/dts/imx6q-wandboard.dts
+++ b/arch/arm/boot/dts/imx6q-wandboard.dts
@@ -13,6 +13,7 @@
compatible = "wand,imx6q-wandboard", "fsl,imx6q";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x80000000>;
};
};
diff --git a/arch/arm/boot/dts/imx6q-zii-rdu2.dts b/arch/arm/boot/dts/imx6q-zii-rdu2.dts
index 7da6dde..0f0743d 100644
--- a/arch/arm/boot/dts/imx6q-zii-rdu2.dts
+++ b/arch/arm/boot/dts/imx6q-zii-rdu2.dts
@@ -50,6 +50,7 @@
/* Will be filled by the bootloader */
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0>;
};
};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 8381d24e..d038f41 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -202,6 +202,7 @@
<&clks IMX6QDL_CLK_GPU2D_CORE>;
clock-names = "bus", "core";
power-domains = <&pd_pu>;
+ #cooling-cells = <2>;
};
ipu2: ipu@2800000 {
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 3dc99dd..8380f1b 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -49,6 +49,7 @@
/* Will be filled by the bootloader */
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index 9332a31..e3be453 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -44,6 +44,7 @@
/ {
/* Will be filled by the bootloader */
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
new file mode 100644
index 0000000..828cf3e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (C) 2018 emtrion GmbH
+//
+
+/ {
+ aliases {
+ boardid = &boardid;
+ mmc0 = &usdhc3;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc1;
+ mmc3 = &usdhc4;
+ };
+
+ reg_wall_5p0: reg-wall5p0 {
+ compatible = "regulator-fixed";
+ regulator-name = "Main-Supply";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_base3p3: reg-base3p3 {
+ compatible = "regulator-fixed";
+ vin-supply = <®_wall_5p0>;
+ regulator-name = "3V3-avari";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_base1p5: reg-base1p5 {
+ compatible = "regulator-fixed";
+ vin-supply = <®_base3p3>;
+ regulator-name = "1V5-avari";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_usb_otg: reg-otgvbus {
+ compatible = "regulator-fixed";
+ vin-supply = <®_wall_5p0>;
+ regulator-name = "OTG_VBUS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ regulator-always-on;
+ };
+
+ clk_codec: clock-codec {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "emCON-avari-sgtl5000";
+ ssi-controller = <&ssi2>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <2>;
+ mux-ext-port = <3>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+&can2 {
+ status = "okay";
+};
+
+&ecspi2 {
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ sgtl5000: audio-codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ #sound-dai-cells = <0>;
+ clocks = <&clk_codec>;
+ VDDA-supply = <®_base3p3>;
+ VDDIO-supply = <®_base3p3>;
+ };
+
+ captouch: touchscreen@38 {
+ compatible = "edt,edt-ft5406";
+ reg = <0x38>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_irq_touch2 &pinctrl_emcon_gpio4>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+ wake-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ wakeup-source;
+ };
+
+ boardid: gpio@3a {
+ compatible = "nxp,pca8574";
+ reg = <0x3a>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&rgb_encoder {
+ status = "okay";
+};
+
+&rgb_panel {
+ compatible = "edt,etm0700g0bdh6";
+ status = "okay";
+};
+
+&ssi2 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+ uart-has-rtscts;
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbotg {
+ status = "okay";
+};
+
+&usdhc1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
new file mode 100644
index 0000000..397e205
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
@@ -0,0 +1,833 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (C) 2018 emtrion GmbH
+//
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+
+ model = "emtrion SoM emCON-MX6";
+ compatible = "emtrion,emcon-mx6";
+
+ aliases {
+ mmc0 = &usdhc3;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc1;
+ rtc0 = &ds1307;
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x40000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emcon_wake>;
+
+ wake {
+ label = "Wake";
+ linux,code = <KEY_WAKEUP>;
+ gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+ };
+
+ som_leds: leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_som_leds>;
+
+ green {
+ label = "som:green";
+ gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+
+ red {
+ label = "som:red";
+ gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ };
+
+ lvds_backlight: lvds-backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lvds_bl>;
+ enable-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
+ pwms = <&pwm1 0 50000>;
+ brightness-levels = <
+ 0 4 8 16 32 64 80 96 112
+ 128 144 160 176 250
+ >;
+ default-brightness-level = <13>;
+ status = "okay";
+ };
+
+ pwm_fan: pwm-fan {
+ compatible = "pwm-fan";
+ cooling-min-state = <0>;
+ cooling-max-state = <4>;
+ #cooling-cells = <2>;
+ pwms = <&pwm4 0 50000>;
+ cooling-levels = <0 64 127 191 255>;
+ status = "disabled";
+ };
+
+
+ rgb_encoder: display {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgb24_display>;
+ status = "disabled";
+
+ port@0 {
+ reg = <0>;
+
+ rgb_encoder_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ rgb_encoder_out: endpoint {
+ remote-endpoint = <&rgb_panel_in>;
+ };
+ };
+ };
+
+ rgb_panel: lcd {
+ backlight = <&rgb_backlight>;
+ power-supply = <®_parallel_disp>;
+
+ port {
+ rgb_panel_in: endpoint {
+ remote-endpoint = <&rgb_encoder_out>;
+ };
+ };
+ };
+
+ reg_parallel_disp: reg-parallel-display {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgb_bl_en>;
+ regulator-name = "LCD-Supply";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_lvds_disp: reg-lvds-display {
+ compatible = "regulator-fixed";
+ regulator-name = "LVDS-Supply";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ rgb_backlight: rgb-backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgb_bl>;
+ enable-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+ pwms = <&pwm3 0 5000000>;
+ brightness-levels = <
+ 250 176 160 144 128 112
+ 96 80 64 48 32 16 8 1
+ >;
+ default-brightness-level = <13>;
+ status = "okay";
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2>;
+};
+
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>,
+ <&gpio2 27 GPIO_ACTIVE_HIGH>;
+};
+
+&ecspi4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nor_flash>;
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <50>;
+ phy-supply = <&vdd_1V8_reg>;
+ phy-handle = <&ksz9031>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ksz9031: phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+ rxdv-skew-ps = <480>;
+ txen-skew-ps = <480>;
+ rxd0-skew-ps = <480>;
+ rxd1-skew-ps = <480>;
+ rxd2-skew-ps = <480>;
+ rxd3-skew-ps = <480>;
+ txd0-skew-ps = <420>;
+ txd1-skew-ps = <420>;
+ txd2-skew-ps = <360>;
+ txd3-skew-ps = <360>;
+ txc-skew-ps = <1020>;
+ rxc-skew-ps = <960>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ da9063: pmic@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ onkey {
+ compatible = "dlg,da9063-onkey";
+ wakeup-source;
+ };
+
+ watchdog {
+ compatible = "dlg,da9063-watchdog";
+ timeout-sec = <0>;
+ };
+
+ regulators {
+ vddcore_reg: bcore1 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <2>;
+ regulator-name = "DA9063_CORE";
+ regulator-always-on;
+ };
+
+ vddsoc_reg: bcore2 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <2>;
+ regulator-name = "DA9063_SOC";
+ regulator-always-on;
+ };
+
+ vdd_ddr3_reg: bpro {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <2>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_reg: bperi {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <2>;
+ regulator-always-on;
+ };
+
+ vdd_sata_reg: ldo3 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+ vdd_mipi_reg: ldo4 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ vdd_mx6_snvs_reg: ldo5 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_hdmi_reg: ldo6 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_pcie_reg: ldo7 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ vdd_1V8_reg: ldo8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vdd_3V3_sdc_reg: ldo9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_1V2_reg: ldo10 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ ds1307: rtc@68 {
+ compatible = "dallas,ds1307";
+ reg = <0x68>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+};
+
+&iomuxc {
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b060
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x130B0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b060
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_can2: can2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b1
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_cpi1: csi0grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1
+ MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b1
+ MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b1
+ >;
+ };
+
+ /*camera2-pinctrl is in imx6q-emcon.dtsi or imx6dl-emcon.dtsi*/
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+ MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+ MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+ MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x100b1
+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1
+ >;
+ };
+
+ pinctrl_emcon_gpio1: emcongpio1 {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x0b0b1
+ >;
+ };
+
+ pinctrl_emcon_gpio2: emcongpio2 {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0b0b1
+ >;
+ };
+
+ pinctrl_emcon_gpio3: emcongpio3 {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x0b0b1
+ >;
+ };
+
+ pinctrl_emcon_gpio4: emcongpio4 {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x0b0b1
+ >;
+ };
+
+ pinctrl_emcon_gpio5: emcongpio5 {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x0b0b1
+ >;
+ };
+
+ pinctrl_emcon_gpio6: emcongpio6 {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x0b0b1
+ >;
+ };
+
+ pinctrl_emcon_gpio7: emcongpio7 {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x0b0b1
+ >;
+ };
+
+ pinctrl_emcon_gpio8: emcongpio8 {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x0b0b1
+ >;
+ };
+
+ pinctrl_emcon_irq_a: emconirqa {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x0b0b1
+ >;
+ };
+
+ pinctrl_emcon_irq_b: emconirqb {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x0b0b1
+ >;
+ };
+
+ pinctrl_emcon_irq_c: emconirqc {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x0b0b1
+ >;
+ };
+
+ pinctrl_emcon_irq_pwr: emconirqpwr {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x0b0b1
+ >;
+ };
+
+ pinctrl_emcon_wake: emconwake {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b030
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b030
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x4001a0b1
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b058
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4000b070
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b870
+ >;
+ };
+
+ pinctrl_irq_touch1: irqtouch1 {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x0b0b1
+ >;
+ };
+
+ pinctrl_irq_touch2: irqtouch2 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x0b0b1
+ >;
+ };
+
+ pinctrl_lvds_bl: lvdsbacklightgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x0b0b1
+ MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b1
+ >;
+ };
+
+ pinctrl_lvds_reg: lvdsreggrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x0b0b1
+ >;
+ };
+
+
+ pinctrl_nor_flash: norflashgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b1
+ MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1
+ >;
+ };
+
+ pinctrl_pcie_ctrl: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b1
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b1
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x0b0b1
+ >;
+ };
+
+ pinctrl_pwm_fan: pwmfan {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x0b0b1
+ >;
+ };
+
+ pinctrl_rgb_bl: rgbbacklightgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x0b0b1
+ MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0b0b1
+ >;
+ };
+
+ pinctrl_rgb_bl_en: rgbenable {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x0b0b1
+ >;
+ };
+
+ pinctrl_rgb24_display: rgbgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
+ pinctrl_secure: securegrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b1
+ >;
+ };
+
+ pinctrl_som_leds: somledgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x0b0b1
+ MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x0b0b1
+ >;
+ };
+
+ pinctrl_spdif_in: spdifin {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0
+ >;
+ };
+
+ pinctrl_spdif_out: spdifout {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x13091
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1
+ MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usb_host1: usbhgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D31__USB_H1_PWR 0x1B058
+ MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1B058
+ >;
+ };
+
+ pinctrl_usb_otg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+ MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x17059
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+ MX6QDL_PAD_GPIO_1__SD1_CD_B 0x1b0b1
+ MX6QDL_PAD_DI0_PIN4__SD1_WP 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6QDL_PAD_GPIO_4__SD2_CD_B 0x1b0b1
+ MX6QDL_PAD_GPIO_2__SD2_WP 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1
+ >;
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&rgb_encoder_in>;
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie_ctrl>;
+ reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+ disable-gpio = <&gpio2 22 GPIO_ACTIVE_LOW>;
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&pwm4 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+};
+
+&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_host1>;
+};
+
+&usbotg {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg>;
+ vbus-supply = <®_usb_otg>;
+ dr_mode = "peripheral";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ fsl,wp-controller;
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ fsl,wp-controller;
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ non-removable;
+ bus-width = <8>;
+ status = "okay";
+};
+
+/******device power Management*********/
+
+&cpu0 {
+ voltage-tolerance = <2>;
+};
+
+®_arm {
+ vin-supply = <&vddcore_reg>;
+};
+
+®_soc {
+ vin-supply = <&vddsoc_reg>;
+};
+
+®_pu {
+ vin-supply = <&vddsoc_reg>;
+};
+
+/*******Disabled HW following***********/
+
+&snvs_rtc {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 17a7b9c..d360996 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -45,6 +45,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index b804468..2ff377d 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -60,6 +60,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 629908f..68ab543 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -60,6 +60,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index a1a6fb5..81b2fcf 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -60,6 +60,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index 4e21b38..8e46a80 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -75,6 +75,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index 81dae5b..dacc2a14 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -52,6 +52,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
index c5d95e8..a106689 100644
--- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -81,6 +81,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
index b5986ef..e8e36df 100644
--- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
@@ -114,6 +114,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
index 3681322..9cb9a74 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
@@ -84,6 +84,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
index 3c52bdb..6d21cc6 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
@@ -94,6 +94,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
index 0e64016..2ffb21d 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -43,6 +43,7 @@
/ {
/* Will be filled by the bootloader */
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
index c413f9c..e423133 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
@@ -43,6 +43,7 @@
/ {
/* Will be filled by the bootloader */
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
index ba93026..1d1b4bd 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -10,6 +10,7 @@
/ {
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x80000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 84d03c6..7814f1e 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -10,9 +10,14 @@
/ {
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x80000000>;
};
+ chosen {
+ stdout-path = &uart4;
+ };
+
backlight_lvds: backlight-lvds {
compatible = "pwm-backlight";
pwms = <&pwm3 0 100000>;
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index 29baf25..7a85116 100644
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -11,6 +11,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index 39200e5d..c3415aa 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -11,6 +11,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0xF0000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
index 572abd7..ed53f07 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -11,6 +11,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 98384a6..8b0e432 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -13,6 +13,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index ed1aafd..1b50b01e 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -16,6 +16,7 @@
compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x80000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index a6dc5c4..1280de5 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -12,6 +12,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x80000000>;
};
@@ -75,39 +76,49 @@
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ reg_audio: regulator-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "cs42888_supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- reg_audio: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "cs42888_supply";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ reg_usb_h1_vbus: regulator-usb-h1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- reg_usb_h1_vbus: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "usb_h1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- reg_usb_otg_vbus: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ reg_can_en: regulator-can-en {
+ compatible = "regulator-fixed";
+ regulator-name = "can-en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&max7310_b 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_can_stby: regulator-can-stby {
+ compatible = "regulator-fixed";
+ regulator-name = "can-stby";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_can_en>;
};
sound-cs42888 {
@@ -288,6 +299,20 @@
status = "okay";
};
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can_stby>;
+ status = "disabled"; /* pin conflict with fec */
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can_stby>;
+ status = "okay";
+};
+
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
@@ -503,6 +528,20 @@
>;
};
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x17059
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x17059
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x17059
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x17059
+ >;
+ };
+
pinctrl_gpio_keys: gpiokeysgrp {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0
@@ -758,6 +797,10 @@
status = "okay";
};
+&pcie {
+ status = "okay";
+};
+
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spdif>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 654cf2c..8468216 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -50,6 +50,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 6e46a19..8930aec 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -13,55 +13,58 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&swbst_reg>;
+ };
- reg_usb_otg_vbus: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 0>;
- enable-active-high;
- vin-supply = <&swbst_reg>;
- };
+ reg_usb_h1_vbus: regulator-usb-h1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&swbst_reg>;
+ };
- reg_usb_h1_vbus: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "usb_h1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 29 0>;
- enable-active-high;
- vin-supply = <&swbst_reg>;
- };
+ reg_audio: regulator-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "wm8962-supply";
+ gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- reg_audio: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "wm8962-supply";
- gpio = <&gpio4 10 0>;
- enable-active-high;
- };
+ reg_pcie: regulator-pcie {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie_reg>;
+ regulator-name = "MPCIE_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- reg_pcie: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pcie_reg>;
- regulator-name = "MPCIE_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 19 0>;
- enable-active-high;
- };
+ reg_sensors: regulator-sensors {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sensors_reg>;
+ regulator-name = "sensors-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
};
gpio-keys {
@@ -240,6 +243,15 @@
>;
};
+ accelerometer@1c {
+ compatible = "fsl,mma8451";
+ reg = <0x1c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_mma8451_int>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+ };
+
ov5642: camera@3c {
compatible = "ovti,ov5642";
pinctrl-names = "default";
@@ -272,6 +284,16 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
+ touchscreen@4 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_egalax_int>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+ };
+
ov5640: camera@3c {
compatible = "ovti,ov5640";
pinctrl-names = "default";
@@ -410,6 +432,24 @@
interrupts = <7 2>;
wakeup-gpios = <&gpio6 7 0>;
};
+
+ magnetometer@e {
+ compatible = "fsl,mag3110";
+ reg = <0x0e>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_mag3110_int>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ light-sensor@44 {
+ compatible = "isil,isl29023";
+ reg = <0x44>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_isl29023_int>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ };
};
&iomuxc {
@@ -491,6 +531,12 @@
>;
};
+ pinctrl_i2c1_mma8451_int: i2c1mma8451intgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0xb0b1
+ >;
+ };
+
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
@@ -498,6 +544,12 @@
>;
};
+ pinctrl_i2c2_egalax_int: i2c2egalaxintgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0
+ >;
+ };
+
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
@@ -505,6 +557,18 @@
>;
};
+ pinctrl_i2c3_isl29023_int: i2c3isl29023intgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0xb0b1
+ >;
+ };
+
+ pinctrl_i2c3_mag3110_int: i2c3mag3110intgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D16__GPIO3_IO16 0xb0b1
+ >;
+ };
+
pinctrl_ipu1_csi0: ipu1csi0grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
@@ -553,6 +617,12 @@
>;
};
+ pinctrl_sensors_reg: sensorsreggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b0
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index a98fb25..c68cb90 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -62,6 +62,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0>; /* will be filled by U-Boot */
};
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index 4f27861..776bfc7 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -32,6 +32,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
@@ -195,6 +196,13 @@
>;
};
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
pinctrl_usbh: usbhgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
@@ -265,6 +273,12 @@
status = "okay";
};
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
&usbh1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh>;
diff --git a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi
index 38080c1..8752a49 100644
--- a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi
@@ -11,6 +11,7 @@
/ {
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
index 855dc6f..e781a45 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
@@ -1,13 +1,8 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <[email protected]>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+//
+// Author: Fabio Estevam <[email protected]>
#include "imx6qdl-wandboard.dtsi"
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
index 49a0a55..3874e74 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
@@ -1,13 +1,8 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <[email protected]>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+//
+// Author: Fabio Estevam <[email protected]>
#include "imx6qdl-wandboard.dtsi"
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
index 69d9c86..9390979 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
@@ -1,13 +1,8 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <[email protected]>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+//
+// Author: Fabio Estevam <[email protected]>
#include "imx6qdl-wandboard.dtsi"
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 85e79a3..69942c7f 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -609,13 +609,14 @@
};
touchscreen@2a {
- compatible = "eeti,egalax_ts";
+ compatible = "eeti,exc3000";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ts>;
reg = <0x2a>;
interrupt-parent = <&gpio1>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
- wakeup-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ touchscreen-inverted-x;
+ touchscreen-swapped-x-y;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index e4daf15..fe17a34 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -13,10 +13,8 @@
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
- * Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; };
aliases {
ethernet0 = &fec;
@@ -77,6 +75,7 @@
fsl,tempmon = <&anatop>;
fsl,tempmon-data = <&ocotp>;
clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+ #thermal-sensor-cells = <0>;
};
ldb: ldb {
@@ -139,6 +138,16 @@
interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
};
+ usbphynop1: usbphynop1 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+
+ usbphynop2: usbphynop2 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -216,6 +225,7 @@
<&clks IMX6QDL_CLK_GPU3D_SHADER>;
clock-names = "bus", "core", "shader";
power-domains = <&pd_pu>;
+ #cooling-cells = <2>;
};
gpu_2d: gpu@134000 {
@@ -226,6 +236,7 @@
<&clks IMX6QDL_CLK_GPU2D_CORE>;
clock-names = "bus", "core";
power-domains = <&pd_pu>;
+ #cooling-cells = <2>;
};
timer@a00600 {
@@ -548,6 +559,7 @@
clocks = <&clks IMX6QDL_CLK_CAN1_IPG>,
<&clks IMX6QDL_CLK_CAN1_SERIAL>;
clock-names = "ipg", "per";
+ fsl,stop-mode = <&gpr 0x34 28 0x10 17>;
status = "disabled";
};
@@ -558,6 +570,7 @@
clocks = <&clks IMX6QDL_CLK_CAN2_IPG>,
<&clks IMX6QDL_CLK_CAN2_SERIAL>;
clock-names = "ipg", "per";
+ fsl,stop-mode = <&gpr 0x34 29 0x10 18>;
status = "disabled";
};
@@ -981,6 +994,8 @@
reg = <0x02184400 0x200>;
interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_USBOH3>;
+ fsl,usbphy = <&usbphynop1>;
+ phy_type = "hsic";
fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host";
ahb-burst-config = <0x0>;
@@ -994,6 +1009,8 @@
reg = <0x02184600 0x200>;
interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_USBOH3>;
+ fsl,usbphy = <&usbphynop2>;
+ phy_type = "hsic";
fsl,usbmisc = <&usbmisc 3>;
dr_mode = "host";
ahb-burst-config = <0x0>;
@@ -1115,6 +1132,7 @@
mmdc0: mmdc@21b0000 { /* MMDC0 */
compatible = "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
+ clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>;
};
mmdc1: mmdc@21b4000 { /* MMDC1 */
diff --git a/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts b/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts
index bcca5ac..08d8b78 100644
--- a/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts
+++ b/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts
@@ -13,6 +13,7 @@
compatible = "wand,imx6qp-wandboard", "fsl,imx6qp";
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x80000000>;
};
};
diff --git a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts
index 8c293e9..98bf7a6 100644
--- a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts
+++ b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts
@@ -50,6 +50,7 @@
/* Will be filled by the bootloader */
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0>;
};
};
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 679b448..f7a48e4 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -17,6 +17,7 @@
};
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts
index 404e602..408da70 100644
--- a/arch/arm/boot/dts/imx6sl-warp.dts
+++ b/arch/arm/boot/dts/imx6sl-warp.dts
@@ -55,6 +55,7 @@
compatible = "warp,imx6sl-warp", "fsl,imx6sl";
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 7a3ae71..e7524e7 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -13,10 +13,8 @@
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
- * Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; };
aliases {
ethernet0 = &fec;
@@ -110,6 +108,11 @@
interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
};
+ usbphynop1: usbphynop1 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -588,7 +591,6 @@
regulator-name = "vddpu";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
- regulator-always-on;
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <9>;
anatop-vol-bit-width = <5>;
@@ -815,6 +817,8 @@
reg = <0x02184400 0x200>;
interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USBOH3>;
+ fsl,usbphy = <&usbphynop1>;
+ phy_type = "hsic";
fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host";
ahb-burst-config = <0x0>;
@@ -921,6 +925,7 @@
mmdc: mmdc@21b0000 {
compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
+ clocks = <&clks IMX6SL_CLK_MMDC_P0_IPG>;
};
rngb: rngb@21b4000 {
diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
index c8e1155..d816370 100644
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -20,6 +20,7 @@
};
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x80000000>;
};
@@ -31,6 +32,18 @@
status = "okay";
};
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led>;
+
+ user {
+ label = "debug";
+ gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
reg_usb_otg1_vbus: regulator-otg1-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
@@ -301,6 +314,12 @@
status = "okay";
};
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog1>;
+ fsl,ext-reset-output;
+};
+
&iomuxc {
pinctrl_reg_sd3_vmmc: sd3vmmcgrp {
fsl,pins = <
@@ -455,9 +474,21 @@
>;
};
+ pinctrl_led: ledgrp {
+ fsl,pins = <
+ MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04 0x17059
+ >;
+ };
+
pinctrl_pwm1: pmw1grp {
fsl,pins = <
MX6SLL_PAD_PWM1__PWM1_OUT 0x110b0
>;
};
+
+ pinctrl_wdog1: wdog1grp {
+ fsl,pins = <
+ MX6SLL_PAD_WDOG_B__WDOG1_B 0x170b0
+ >;
+ };
};
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index ed9a980..62847c68 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -593,7 +593,6 @@
#interrupt-cells = <3>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&intc>;
- fsl,mf-mix-wakeup-irq = <0x7c00000 0x7d00 0x0 0x1400640>;
};
iomuxc: pinctrl@20e0000 {
@@ -740,7 +739,7 @@
i2c1: i2c@21a0000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c";
+ compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
reg = <0x021a0000 0x4000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_I2C1>;
@@ -770,6 +769,7 @@
mmdc: memory-controller@21b0000 {
compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
+ clocks = <&clks IMX6SLL_CLK_MMDC_P0_IPG>;
};
ocotp: ocotp-ctrl@21bc000 {
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
index adb5cc7..832b5c5 100644
--- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -12,6 +12,7 @@
compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx";
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index 841a27f..b0ee324 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -11,6 +11,7 @@
compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx";
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x80000000>;
};
@@ -36,6 +37,35 @@
gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ reg_can_wake: regulator-can-wake {
+ compatible = "regulator-fixed";
+ regulator-name = "can-wake";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_can_en: regulator-can-en {
+ compatible = "regulator-fixed";
+ regulator-name = "can-en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_can_wake>;
+ };
+
+ reg_can_stby: regulator-can-stby {
+ compatible = "regulator-fixed";
+ regulator-name = "can-stby";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&max7310_b 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_can_en>;
+ };
};
&anaclk2 {
@@ -75,6 +105,20 @@
status = "okay";
};
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can_stby>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can_stby>;
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
@@ -149,6 +193,20 @@
>;
};
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b020
+ MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b020
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020
+ MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b020
+ >;
+ };
+
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index 9cc6ff2..53241ae 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -1,10 +1,6 @@
-/*
- * Copyright (C) 2015 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
#include "imx6sx-sdb.dtsi"
@@ -142,3 +138,15 @@
spi-max-frequency = <66000000>;
};
};
+
+®_can_en {
+ /* Transceiver EN/STBY is active high on RevA board */
+ gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+};
+
+®_can_stby {
+ gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_can_en>;
+};
diff --git a/arch/arm/boot/dts/imx6sx-sdb-sai.dts b/arch/arm/boot/dts/imx6sx-sdb-sai.dts
index 2ac865b..1c4eacd 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-sai.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-sai.dts
@@ -1,43 +1,6 @@
-/*
- * Copyright (C) 2016 NXP Semiconductors
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2016 Freescale Semiconductor, Inc.
#include "imx6sx-sdb.dts"
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index 6dd9beb..b1b33ad 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -1,10 +1,6 @@
-/*
- * Copyright (C) 2015 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
#include "imx6sx-sdb.dtsi"
@@ -136,3 +132,8 @@
®_soc {
vin-supply = <&sw1a_reg>;
};
+
+®_can_stby {
+ /* Transceiver EN/STBY is active low on RevB board */
+ gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index 53b3408..08ede56 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -1,10 +1,6 @@
-/*
- * Copyright (C) 2014 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2014 Freescale Semiconductor, Inc.
/dts-v1/;
@@ -21,6 +17,7 @@
};
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x40000000>;
};
@@ -117,7 +114,9 @@
regulator-name = "enet_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+ regulator-boot-on;
+ regulator-always-on;
};
reg_pcie_gpio: regulator-pcie-gpio {
@@ -138,6 +137,20 @@
regulator-max-microvolt = <5000000>;
};
+ reg_can_en: regulator-can-en {
+ compatible = "regulator-fixed";
+ regulator-name = "can-en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_can_stby: regulator-can-stby {
+ compatible = "regulator-fixed";
+ regulator-name = "can-stby";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
sound {
compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
model = "wm8962-audio";
@@ -180,6 +193,7 @@
phy-supply = <®_enet_3v3>;
phy-mode = "rgmii";
phy-handle = <ðphy1>;
+ phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
status = "okay";
mdio {
@@ -204,6 +218,20 @@
status = "okay";
};
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can_stby>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can_stby>;
+ status = "okay";
+};
+
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -373,6 +401,8 @@
MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91
+ /* phy reset */
+ MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0x10b0
>;
};
@@ -399,6 +429,20 @@
>;
};
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b020
+ MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b020
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020
+ MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b020
+ >;
+ };
+
pinctrl_gpio_keys: gpio_keysgrp {
fsl,pins = <
MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
index 252175b..2bc5162 100644
--- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
+++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
@@ -21,6 +21,7 @@
};
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
index 40ccdf4..db0feb9 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
@@ -49,6 +49,7 @@
compatible = "udoo,neobasic", "fsl,imx6sx";
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x20000000>;
};
};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
index 42bfc8f..5c7a2bb 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
@@ -49,6 +49,7 @@
compatible = "udoo,neoextended", "fsl,imx6sx";
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x40000000>;
};
};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
index c84c877..13dfe2a 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
@@ -49,6 +49,7 @@
compatible = "udoo,neofull", "fsl,imx6sx";
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x40000000>;
};
};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 95a3c1c..272ff61 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -15,10 +15,8 @@
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
- * Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; };
aliases {
can0 = &flexcan1;
@@ -159,6 +157,11 @@
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
};
+ usbphynop1: usbphynop1 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -448,6 +451,7 @@
clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
<&clks IMX6SX_CLK_CAN1_SERIAL>;
clock-names = "ipg", "per";
+ fsl,stop-mode = <&gpr 0x10 1 0x10 17>;
status = "disabled";
};
@@ -458,6 +462,7 @@
clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
<&clks IMX6SX_CLK_CAN2_SERIAL>;
clock-names = "ipg", "per";
+ fsl,stop-mode = <&gpr 0x10 2 0x10 18>;
status = "disabled";
};
@@ -558,7 +563,7 @@
compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SX_CLK_DUMMY>;
+ clocks = <&clks IMX6SX_CLK_IPG>;
status = "disabled";
};
@@ -566,14 +571,14 @@
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SX_CLK_DUMMY>;
+ clocks = <&clks IMX6SX_CLK_IPG>;
};
wdog2: wdog@20c0000 {
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SX_CLK_DUMMY>;
+ clocks = <&clks IMX6SX_CLK_IPG>;
status = "disabled";
};
@@ -877,6 +882,7 @@
reg = <0x02184400 0x200>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_USBOH3>;
+ fsl,usbphy = <&usbphynop1>;
fsl,usbmisc = <&usbmisc 2>;
phy_type = "hsic";
fsl,anatop = <&anatop>;
@@ -1002,6 +1008,7 @@
mmdc: mmdc@21b0000 {
compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
+ clocks = <&clks IMX6SX_CLK_MMDC_P0_IPG>;
};
fec2: ethernet@21b4000 {
@@ -1193,11 +1200,11 @@
};
pxp: pxp@2218000 {
+ compatible = "fsl,imx6sx-pxp", "fsl,imx6ull-pxp";
reg = <0x02218000 0x4000>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SX_CLK_PXP_AXI>,
- <&clks IMX6SX_CLK_DISPLAY_AXI>;
- clock-names = "pxp-axi", "disp-axi";
+ clocks = <&clks IMX6SX_CLK_PXP_AXI>;
+ clock-names = "axi";
status = "disabled";
};
@@ -1269,7 +1276,7 @@
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
reg = <0x02288000 0x4000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SX_CLK_DUMMY>;
+ clocks = <&clks IMX6SX_CLK_IPG>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index 32a0723..5223ada 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -1,10 +1,6 @@
-/*
- * Copyright (C) 2015 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
/ {
chosen {
@@ -12,6 +8,7 @@
};
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x20000000>;
};
@@ -33,6 +30,14 @@
enable-active-high;
};
+ reg_can_3v3: regulator-can-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "can-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "mx6ul-wm8960";
@@ -67,6 +72,28 @@
};
};
+ spi4 {
+ compatible = "spi-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi4>;
+ status = "okay";
+ gpio-sck = <&gpio5 11 0>;
+ gpio-mosi = <&gpio5 10 0>;
+ cs-gpios = <&gpio5 7 0>;
+ num-chipselects = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio_spi: gpio@0 {
+ compatible = "fairchild,74hc595";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0>;
+ registers-number = <1>;
+ spi-max-frequency = <100000>;
+ };
+ };
+
panel {
compatible = "innolux,at043tn24";
backlight = <&backlight_display>;
@@ -133,6 +160,20 @@
};
};
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can_3v3>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can_3v3>;
+ status = "okay";
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -418,6 +459,15 @@
>;
};
+ pinctrl_spi4: spi4grp {
+ fsl,pins = <
+ MX6UL_PAD_BOOT_MODE0__GPIO5_IO10 0x70a1
+ MX6UL_PAD_BOOT_MODE1__GPIO5_IO11 0x70a1
+ MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x70a1
+ MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x80000000
+ >;
+ };
+
pinctrl_tsc: tscgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
index 11966d1..3749fdd 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
@@ -24,6 +24,18 @@
status = "okay";
};
+ panel {
+ compatible = "auo,g101evn010", "simple-panel";
+ power-supply = <&ldo4_ext>;
+ backlight = <&lcd_backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+
reg_usb_otg1_vbus: regulator-usb-otg1 {
compatible = "regulator-fixed";
regulator-name = "usb_otg1_vbus";
@@ -105,6 +117,19 @@
};
};
+&i2c1 {
+ touchscreen@14 {
+ compatible = "goodix,gt911";
+ reg = <0x14>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_goodix_touch>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+ irq-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+};
+
&lcdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdif_dat0_17
@@ -112,6 +137,12 @@
&pinctrl_lcdif_hvsync>;
lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */
status = "okay";
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
};
&ldo4_ext {
@@ -272,6 +303,12 @@
>;
};
+ pinctrl_goodix_touch: goodixgrp{
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1020
+ >;
+ };
+
pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 {
fsl,pins = <
MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
index c71a84d..b5781c3 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
@@ -7,6 +7,11 @@
*/
/ {
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0>; /* will be filled by U-Boot */
+ };
+
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
@@ -161,6 +166,25 @@
};
};
+/* UART1 (Bluetooth) */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+/* USDHC1 (Wireless) */
+&usdhc1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_wifibt_ctrl>;
+ pinctrl-1 = <&pinctrl_usdhc1_sleep &pinctrl_wifibt_ctrl_sleep>;
+ non-removable;
+ no-1-8-v;
+ bus-width = <4>;
+ status = "okay";
+};
+
&iomuxc {
pinctrl_gpmi_nand: gpmigrp {
fsl,pins = <
@@ -179,15 +203,60 @@
MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1
MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1
MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb0b1
- >;
- };
+ >;
+ };
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
- >;
- };
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS 0x1b0b1
+ MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17051
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1_sleep: usdhc1grp-sleep {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__GPIO2_IO16 0x3000
+ MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x3000
+ MX6UL_PAD_SD1_DATA0__GPIO2_IO18 0x3000
+ MX6UL_PAD_SD1_DATA1__GPIO2_IO19 0x3000
+ MX6UL_PAD_SD1_DATA2__GPIO2_IO20 0x3000
+ MX6UL_PAD_SD1_DATA3__GPIO2_IO21 0x3000
+ >;
+ };
+
+ pinctrl_wifibt_ctrl: wifibt-ctrl-grp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x08a0
+ MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x08a0
+ >;
+ };
+
+ pinctrl_wifibt_ctrl_sleep: wifibt-ctrl-grp-sleep {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x3000
+ MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x3000
+ >;
+ };
};
®_arm {
diff --git a/arch/arm/boot/dts/imx6ul-geam.dts b/arch/arm/boot/dts/imx6ul-geam.dts
index e22ec5b..bc77f26 100644
--- a/arch/arm/boot/dts/imx6ul-geam.dts
+++ b/arch/arm/boot/dts/imx6ul-geam.dts
@@ -15,6 +15,7 @@
compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi
index b1fa3f0..213e802 100644
--- a/arch/arm/boot/dts/imx6ul-isiot.dtsi
+++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi
@@ -10,6 +10,7 @@
/ {
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/imx6ul-litesom.dtsi b/arch/arm/boot/dts/imx6ul-litesom.dtsi
index 8f775f6..8d68932 100644
--- a/arch/arm/boot/dts/imx6ul-litesom.dtsi
+++ b/arch/arm/boot/dts/imx6ul-litesom.dtsi
@@ -48,6 +48,7 @@
compatible = "grinn,imx6ul-litesom", "fsl,imx6ul";
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x20000000>;
};
};
diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi
index a031bee..cf7faf4 100644
--- a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi
@@ -49,6 +49,7 @@
/ {
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0>; /* will be filled by U-Boot */
};
diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
index 0c09420f..39eeedd 100644
--- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
+++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
@@ -1,123 +1,33 @@
-/*
- * Copyright 2015 Technexion Ltd.
- *
- * Author: Wig Cheng <[email protected]>
- * Richard Hu <[email protected]>
- * Tapani Utriainen <[email protected]>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng <[email protected]>
+// Richard Hu <[email protected]>
+// Tapani Utriainen <[email protected]>
/dts-v1/;
-#include "imx6ul.dtsi"
-
+#include "imx6ul-pico.dtsi"
/ {
- model = "Technexion Pico i.MX6UL Board";
+ model = "TechNexion PICO-IMX6UL and HOBBIT baseboard";
compatible = "technexion,imx6ul-pico-hobbit", "fsl,imx6ul";
- /* Will be filled by the bootloader */
- memory@80000000 {
- reg = <0x80000000 0>;
- };
-
- chosen {
- stdout-path = &uart6;
- };
-
- backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm3 0 5000000>;
- brightness-levels = <0 4 8 16 32 64 128 255>;
- default-brightness-level = <6>;
- status = "okay";
- };
-
- reg_2p5v: regulator-2p5v {
- compatible = "regulator-fixed";
- regulator-name = "2P5V";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- };
-
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- reg_sd1_vmmc: regulator-sd1-vmmc {
- compatible = "regulator-fixed";
- regulator-name = "VSD_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_usb_otg_vbus: regulator-usb-otg-vbus {
- compatible = "regulator-fixed";
+ leds {
+ compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb_otg1>;
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 6 0>;
- };
+ pinctrl-0 = <&pinctrl_gpio_leds>;
- reg_brcm: regulator-brcm {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_brcm_reg>;
- regulator-name = "brcm_reg";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <200000>;
+ led {
+ label = "gpio-led";
+ gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+ };
};
sound {
compatible = "fsl,imx-audio-sgtl5000";
model = "imx6ul-sgtl5000";
audio-cpu = <&sai1>;
- audio-codec = <&codec>;
+ audio-codec = <&sgtl5000>;
audio-routing =
"LINE_IN", "Line In Jack",
"MIC_IN", "Mic Jack",
@@ -130,92 +40,6 @@
#clock-cells = <0>;
clock-frequency = <24576000>;
};
-
- leds {
- compatible = "gpio-leds";
-
- hobbitled {
- label = "hobbitled";
- gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&can1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan1>;
- status = "okay";
-};
-
-&can2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan2>;
- status = "okay";
-};
-
-&clks {
- assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
- assigned-clock-rates = <786432000>;
-};
-
-&fec2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet2>;
- phy-mode = "rmii";
- phy-handle = <ðphy1>;
- status = "okay";
- phy-reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <1>;
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy1: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- max-speed = <100>;
- interrupt-parent = <&gpio5>;
- interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
- };
- };
-};
-
-&i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- status = "okay";
-
- pmic: pfuze3000@8 {
- compatible = "fsl,pfuze3000";
- reg = <0x08>;
-
- regulators {
- /* VDD_ARM_SOC_IN*/
- sw1b_reg: sw1b {
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1475000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <6250>;
- };
-
- /* DRAM */
- sw3a_reg: sw3 {
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1650000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- /* DRAM */
- vref_reg: vrefddr {
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
};
&i2c2 {
@@ -224,7 +48,7 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- codec: sgtl5000@a {
+ sgtl5000: codec@a {
reg = <0x0a>;
compatible = "fsl,sgtl5000";
clocks = <&sys_mclk>;
@@ -234,317 +58,43 @@
};
&i2c3 {
- clock_frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- status = "okay";
-};
-
-&lcdif {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
- display = <&display0>;
status = "okay";
- display0: display0 {
- bits-per-pixel = <32>;
- bus-width = <24>;
-
- display-timings {
- native-mode = <&timing0>;
-
- timing0: timing0 {
- clock-frequency = <33200000>;
- hactive = <800>;
- vactive = <480>;
- hfront-porch = <210>;
- hback-porch = <46>;
- hsync-len = <1>;
- vback-porch = <22>;
- vfront-porch = <23>;
- vsync-len = <1>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
+ polytouch: touchscreen@38 {
+ compatible = "edt,edt-ft5x06";
+ reg = <0x38>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
};
-};
-&pwm3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm3>;
- status = "okay";
-};
-
-&pwm7 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm7>;
- status = "okay";
-};
-
-&pwm8 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm8>;
- status = "okay";
-};
-
-&sai1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sai1>;
- status = "okay";
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- uart-has-rtscts;
- status = "okay";
-};
-
-&uart6 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart6>;
- status = "okay";
-};
-
-&usbotg1 {
- vbus-supply = <®_usb_otg_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb_otg1_id>;
- dr_mode = "otg";
- disable-over-current;
- status = "okay";
-};
-
-&usbotg2 {
- dr_mode = "host";
- disable-over-current;
- status = "okay";
-};
-
-&usdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1>;
- bus-width = <8>;
- no-1-8-v;
- non-removable;
- keep-power-in-suspend;
- status = "okay";
-};
-
-&usdhc2 { /* Wifi SDIO */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- no-1-8-v;
- non-removable;
- keep-power-in-suspend;
- wakeup-source;
- vmmc-supply = <®_brcm>;
- status = "okay";
-};
-
-&wdog1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_wdog>;
- fsl,ext-reset-output;
+ adc081c: adc@50 {
+ compatible = "ti,adc081c";
+ reg = <0x50>;
+ vref-supply = <®_3p3v>;
+ };
};
&iomuxc {
- pinctrl_brcm_reg: brcmreggrp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
fsl,pins = <
- MX6UL_PAD_NAND_DATA06__GPIO4_IO08 0x10b0 /* WL_REG_ON */
- MX6UL_PAD_NAND_DATA04__GPIO4_IO06 0x10b0 /* WL_HOST_WAKE */
+ MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x10b0
+ MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x10b0
+ MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x10b0
+ MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x10b0
+ MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x10b0
+ MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x10b0
>;
};
- pinctrl_enet2: enet2grp {
+ pinctrl_gpio_leds: gpioledsgrp {
fsl,pins = <
- MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO 0x1b0b0
- MX6UL_PAD_ENET1_TX_EN__ENET2_MDC 0x1b0b0
- MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
- MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
- MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
- MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
- MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
- MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
- MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
- MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
- MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x800
- MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x79
- >;
- };
-
- pinctrl_flexcan1: flexcan1grp {
- fsl,pins = <
- MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x1b020
- MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x1b020
- >;
- };
-
- pinctrl_flexcan2: flexcan2grp {
- fsl,pins = <
- MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x1b020
- MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x1b020
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x4001b8b0
- MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x4001b8b0
- >;
- };
-
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
- MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
- >;
- };
-
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX6UL_PAD_UART1_TX_DATA__I2C3_SCL 0x4001b8b0
- MX6UL_PAD_UART1_RX_DATA__I2C3_SDA 0x4001b8b0
- >;
- };
-
- pinctrl_lcdif_dat: lcdifdatgrp {
- fsl,pins = <
- MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
- MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
- MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
- MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
- MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
- MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
- MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
- MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
- MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
- MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
- MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
- MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
- MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
- MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
- MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
- MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
- MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
- MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
- MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
- MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
- MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
- MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
- MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
- MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
- >;
- };
-
- pinctrl_lcdif_ctrl: lcdifctrlgrp {
- fsl,pins = <
- MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
- MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
- MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
- MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
- /* LCD reset */
- MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79
- >;
- };
-
- pinctrl_pwm3: pwm3grp {
- fsl,pins = <
- MX6UL_PAD_NAND_ALE__PWM3_OUT 0x110b0
- >;
- };
-
- pinctrl_pwm7: pwm7grp {
- fsl,pins = <
- MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x110b0
- >;
- };
-
- pinctrl_pwm8: pwm8grp {
- fsl,pins = <
- MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0
- >;
- };
-
- pinctrl_sai1: sai1grp {
- fsl,pins = <
- MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x1b0b0
- MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x1b0b0
- MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x110b0
- MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x1f0b8
- >;
- };
-
- pinctrl_uart3: uart3grp {
- fsl,pins = <
- MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b0
- MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b0
- MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b0
- MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b0
- >;
- };
-
- pinctrl_uart5: uart5grp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX 0x1b0b1
- MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX 0x1b0b1
- MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1
- MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1
- >;
- };
-
- pinctrl_uart6: uart6grp {
- fsl,pins = <
- MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x1b0b1
- MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x1b0b1
- >;
- };
-
- pinctrl_usb_otg1: usbotg1grp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x10b0
- >;
- };
-
- pinctrl_usb_otg1_id: usbotg1idgrp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059
- >;
- };
-
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071
- MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
- MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
- MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
- MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
- MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B 0x03029
- MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059
- MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059
- MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059
- MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
- MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059
- MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
- MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
- MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
- MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
- >;
- };
-
- pinctrl_wdog: wdoggrp {
- fsl,pins = <
- MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0
+ MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x10b0
>;
};
};
diff --git a/arch/arm/boot/dts/imx6ul-pico-pi.dts b/arch/arm/boot/dts/imx6ul-pico-pi.dts
new file mode 100644
index 0000000..de07357
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-pico-pi.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng <[email protected]>
+// Richard Hu <[email protected]>
+// Tapani Utriainen <[email protected]>
+/dts-v1/;
+
+#include "imx6ul-pico.dtsi"
+/ {
+ model = "TechNexion PICO-IMX6UL and PI baseboard";
+ compatible = "technexion,imx6ul-pico-pi", "fsl,imx6ul";
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led {
+ label = "gpio-led";
+ gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "imx6ul-sgtl5000";
+ audio-cpu = <&sai1>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "LINE_IN", "Line In Jack",
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ };
+
+ sys_mclk: clock-sys-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+};
+
+&i2c2 {
+ clock_frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ sgtl5000: codec@a {
+ reg = <0x0a>;
+ compatible = "fsl,sgtl5000";
+ clocks = <&sys_mclk>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+};
+
+&i2c3 {
+ clock_frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ polytouch: touchscreen@38 {
+ compatible = "edt,edt-ft5x06";
+ reg = <0x38>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x10b0
+ MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x10b0
+ MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x10b0
+ MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x10b0
+ MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x10b0
+ MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x10b0
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x10b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ul-pico.dtsi b/arch/arm/boot/dts/imx6ul-pico.dtsi
new file mode 100644
index 0000000..de9f8318
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-pico.dtsi
@@ -0,0 +1,461 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng <[email protected]>
+// Richard Hu <[email protected]>
+// Tapani Utriainen <[email protected]>
+/dts-v1/;
+
+#include "imx6ul.dtsi"
+
+/ {
+ /* Will be filled by the bootloader */
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0>;
+ };
+
+ chosen {
+ stdout-path = &uart6;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm3 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+ };
+
+ reg_2p5v: regulator-2p5v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_sd1_vmmc: regulator-sd1-vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 6 0>;
+ };
+
+ reg_brcm: regulator-brcm {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_brcm_reg>;
+ regulator-name = "brcm_reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <200000>;
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+ assigned-clock-rates = <786432000>;
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy1>;
+ status = "okay";
+ phy-reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <1>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ max-speed = <100>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: pfuze3000@8 {
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+
+ regulators {
+ /* VDD_ARM_SOC_IN*/
+ sw1b_reg: sw1b {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ /* DRAM */
+ sw3a_reg: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* DRAM */
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: display0 {
+ bits-per-pixel = <32>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+
+ timing0: timing0 {
+ clock-frequency = <33200000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <210>;
+ hback-porch = <46>;
+ hsync-len = <1>;
+ vback-porch = <22>;
+ vfront-porch = <23>;
+ vsync-len = <1>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm7>;
+ status = "okay";
+};
+
+&pwm8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm8>;
+ status = "okay";
+};
+
+&sai1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai1>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1_id>;
+ dr_mode = "otg";
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ bus-width = <8>;
+ no-1-8-v;
+ non-removable;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&usdhc2 { /* Wifi SDIO */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ no-1-8-v;
+ non-removable;
+ keep-power-in-suspend;
+ wakeup-source;
+ vmmc-supply = <®_brcm>;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+};
+
+&iomuxc {
+ pinctrl_brcm_reg: brcmreggrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_DATA06__GPIO4_IO08 0x10b0 /* WL_REG_ON */
+ MX6UL_PAD_NAND_DATA04__GPIO4_IO06 0x10b0 /* WL_HOST_WAKE */
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET2_MDC 0x1b0b0
+ MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
+ MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x800
+ MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x79
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x1b020
+ MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x1b020
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x1b020
+ MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x1b020
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x4001b8b0
+ MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+ MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__I2C3_SCL 0x4001b8b0
+ MX6UL_PAD_UART1_RX_DATA__I2C3_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
+ MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
+ MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
+ MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
+ MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
+ MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
+ MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
+ >;
+ };
+
+ pinctrl_lcdif_ctrl: lcdifctrlgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
+ /* LCD reset */
+ MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_ALE__PWM3_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_pwm7: pwm7grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_pwm8: pwm8grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x1b0b0
+ MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x1b0b0
+ MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x110b0
+ MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x1f0b8
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b0
+ MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b0
+ MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b0
+ MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX 0x1b0b1
+ MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX 0x1b0b1
+ MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1
+ MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x1b0b1
+ MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usb_otg1: usbotg1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x10b0
+ >;
+ };
+
+ pinctrl_usb_otg1_id: usbotg1idgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B 0x03029
+ MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059
+ MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059
+ MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059
+ MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
index 02b5ba4..bb6dbfd 100644
--- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
@@ -71,6 +71,7 @@
};
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0>; /* will be filled by U-Boot */
};
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 083d344..62ed30c 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -15,10 +15,8 @@
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
- * Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; };
aliases {
ethernet0 = &fec1;
@@ -96,7 +94,7 @@
intc: interrupt-controller@a01000 {
compatible = "arm,gic-400", "arm,cortex-a7-gic";
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
#interrupt-cells = <3>;
interrupt-controller;
interrupt-parent = <&intc>;
@@ -108,10 +106,10 @@
timer {
compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
interrupt-parent = <&intc>;
status = "disabled";
};
@@ -185,7 +183,7 @@
clocks = <&clks IMX6UL_CLK_APBHDMA>;
};
- gpmi: gpmi-nand@1806000 {
+ gpmi: gpmi-nand@1806000 {
compatible = "fsl,imx6q-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
@@ -408,6 +406,7 @@
clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
<&clks IMX6UL_CLK_CAN1_SERIAL>;
clock-names = "ipg", "per";
+ fsl,stop-mode = <&gpr 0x10 1 0x10 17>;
status = "disabled";
};
@@ -418,6 +417,7 @@
clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
<&clks IMX6UL_CLK_CAN2_SERIAL>;
clock-names = "ipg", "per";
+ fsl,stop-mode = <&gpr 0x10 2 0x10 18>;
status = "disabled";
};
@@ -917,6 +917,7 @@
mmdc: mmdc@21b0000 {
compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
+ clocks = <&clks IMX6UL_CLK_MMDC_P0_IPG>;
};
weim: weim@21b8000 {
diff --git a/arch/arm/boot/dts/imx6ull-14x14-evk.dts b/arch/arm/boot/dts/imx6ull-14x14-evk.dts
index 0ba6454..74aaa8a 100644
--- a/arch/arm/boot/dts/imx6ull-14x14-evk.dts
+++ b/arch/arm/boot/dts/imx6ull-14x14-evk.dts
@@ -1,43 +1,6 @@
-/*
- * Copyright (C) 2016 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2016 Freescale Semiconductor, Inc.
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
index 10ab469..fb213be 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
@@ -7,6 +7,7 @@
/ {
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x10000000>;
};
};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
index 183193e..038d8c90 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
@@ -7,6 +7,7 @@
/ {
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index 796ed35..f3668fe 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -39,6 +39,16 @@
reg = <0x02200000 0x100000>;
ranges;
+ dcp: crypto@2280000 {
+ compatible = "fsl,imx6ull-dcp", "fsl,imx28-dcp";
+ reg = <0x02280000 0x4000>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6ULL_CLK_DCP_CLK>;
+ clock-names = "dcp";
+ };
+
iomuxc_snvs: iomuxc-snvs@2290000 {
compatible = "fsl,imx6ull-iomuxc-snvs";
reg = <0x02290000 0x4000>;
diff --git a/arch/arm/boot/dts/imx6ulz-14x14-evk.dts b/arch/arm/boot/dts/imx6ulz-14x14-evk.dts
index 6f1af24..483d973 100644
--- a/arch/arm/boot/dts/imx6ulz-14x14-evk.dts
+++ b/arch/arm/boot/dts/imx6ulz-14x14-evk.dts
@@ -9,6 +9,8 @@
/delete-node/ &fec1;
/delete-node/ &fec2;
+/delete-node/ &can1;
+/delete-node/ &can2;
/delete-node/ &lcdif;
/delete-node/ &tsc;
diff --git a/arch/arm/boot/dts/imx6ulz.dtsi b/arch/arm/boot/dts/imx6ulz.dtsi
index ae6d7e5..0b5f1a7 100644
--- a/arch/arm/boot/dts/imx6ulz.dtsi
+++ b/arch/arm/boot/dts/imx6ulz.dtsi
@@ -20,8 +20,6 @@
};
/delete-node/ &adc1;
-/delete-node/ &can1;
-/delete-node/ &can2;
/delete-node/ &ecspi3;
/delete-node/ &ecspi4;
/delete-node/ &epit2;
diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
index 8bf365d..e615674 100644
--- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
+++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
@@ -19,6 +19,7 @@
compatible = "compulab,cl-som-imx7", "fsl,imx7d";
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */
};
@@ -284,4 +285,4 @@
MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */
>;
};
-};
\ No newline at end of file
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
index 04d24ee..898f4b8 100644
--- a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
+++ b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
@@ -8,6 +8,7 @@
/ {
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x40000000>;
};
};
diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi
index d9f8fb6..e2e327f 100644
--- a/arch/arm/boot/dts/imx7d-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7d-colibri.dtsi
@@ -45,6 +45,7 @@
/ {
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x20000000>;
};
};
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index d8aac4a..6b4acea 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -12,6 +12,7 @@
compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d";
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x40000000>;
};
@@ -86,13 +87,17 @@
compatible = "regulator-fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
- clock-names = "slow";
regulator-name = "reg_wlan";
startup-delay-us = <70000>;
gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ usdhc2_pwrseq: usdhc2_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+ clock-names = "ext_clock";
+ };
};
&adc1 {
@@ -375,6 +380,7 @@
bus-width = <4>;
non-removable;
vmmc-supply = <®_wlan>;
+ mmc-pwrseq = <&usdhc2_pwrseq>;
cap-power-off-card;
keep-power-in-suspend;
status = "okay";
diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
new file mode 100644
index 0000000..7b2198a
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2017 NXP
+
+#include "imx7d-pico.dtsi"
+
+/ {
+ model = "TechNexion PICO-IMX7D Board using Hobbit baseboard";
+ compatible = "technexion,imx7d-pico-hobbit", "fsl,imx7d";
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led {
+ label = "gpio-led";
+ gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "imx7-sgtl5000";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,frame-master = <&dailink_master>;
+ simple-audio-card,cpu {
+ sound-dai = <&sai1>;
+ };
+
+ dailink_master: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ };
+ };
+};
+
+&i2c1 {
+ sgtl5000: codec@a {
+ #sound-dai-cells = <0>;
+ reg = <0x0a>;
+ compatible = "fsl,sgtl5000";
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_vref_1v8>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ adc081c: adc@50 {
+ compatible = "ti,adc081c";
+ reg = <0x50>;
+ vref-supply = <®_3p3v>;
+ };
+};
+
+&ecspi3 {
+ ads7846@0 {
+ reg = <0>;
+ compatible = "ti,ads7846";
+ interrupt-parent = <&gpio2>;
+ interrupts = <7 0>;
+ spi-max-frequency = <1000000>;
+ pendown-gpio = <&gpio2 7 0>;
+ vcc-supply = <®_3p3v>;
+ ti,x-min = /bits/ 16 <0>;
+ ti,x-max = /bits/ 16 <4095>;
+ ti,y-min = /bits/ 16 <0>;
+ ti,y-max = /bits/ 16 <4095>;
+ ti,pressure-max = /bits/ 16 <1024>;
+ ti,x-plate-ohms = /bits/ 16 <90>;
+ ti,y-plate-ohms = /bits/ 16 <90>;
+ ti,debounce-max = /bits/ 16 <70>;
+ ti,debounce-tol = /bits/ 16 <3>;
+ ti,debounce-rep = /bits/ 16 <2>;
+ ti,settle-delay-usec = /bits/ 16 <150>;
+ wakeup-source;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14
+ MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14
+ MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14
+ MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x14
+ MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x14
+ MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x14
+ MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x14
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx7d-pico-pi.dts b/arch/arm/boot/dts/imx7d-pico-pi.dts
index ee02d93..70bea95 100644
--- a/arch/arm/boot/dts/imx7d-pico-pi.dts
+++ b/arch/arm/boot/dts/imx7d-pico-pi.dts
@@ -1,48 +1,24 @@
-/*
- * Copyright 2017 NXP
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2017 NXP
#include "imx7d-pico.dtsi"
/ {
+ model = "TechNexion PICO-IMX7D Board and PI baseboard";
+ compatible = "technexion,imx7d-pico-pi", "fsl,imx7d";
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led {
+ label = "gpio-led";
+ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "imx7-sgtl5000";
@@ -54,43 +30,14 @@
};
dailink_master: simple-audio-card,codec {
- sound-dai = <&codec>;
+ sound-dai = <&sgtl5000>;
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
};
};
};
-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet1>;
- assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
- <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
- assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
- assigned-clock-rates = <0>, <100000000>;
- phy-mode = "rgmii";
- phy-handle = <ðphy0>;
- fsl,magic-packet;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- status = "okay";
- };
- };
-};
-
&i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- status = "okay";
-
- codec: sgtl5000@a {
+ sgtl5000: codec@a {
#sound-dai-cells = <0>;
reg = <0x0a>;
compatible = "fsl,sgtl5000";
@@ -100,82 +47,47 @@
};
};
-
-&sai1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sai1>;
- assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
- <&clks IMX7D_SAI1_ROOT_CLK>;
- assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
- assigned-clock-rates = <0>, <24576000>;
- status = "okay";
-};
-
-&uart5 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart5>;
- assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
- assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
- status = "okay";
-};
-
-&usbotg1 {
- vbus-supply = <®_usb_otg1_vbus>;
- status = "okay";
-};
-
-&usbotg2 {
- vbus-supply = <®_usb_otg2_vbus>;
- dr_mode = "host";
- status = "okay";
+&i2c4 {
+ polytouch: touchscreen@38 {
+ compatible = "edt,edt-ft5x06";
+ reg = <0x38>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touchscreen>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
+ };
};
&iomuxc {
- pinctrl_enet1: enet1grp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
fsl,pins = <
- MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3
- MX7D_PAD_SD2_WP__ENET1_MDC 0x3
- MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1
- MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1
- MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1
- MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1
- MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1
- MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1
- MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1
- MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1
- MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
- MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
- MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
- MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
+ MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14
+ MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14
+ MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14
+ MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x14
+ MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x14
+ MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x14
+ MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x14
>;
};
- pinctrl_i2c1: i2c1grp {
+ pinctrl_gpio_leds: gpioledsgrp {
fsl,pins = <
- MX7D_PAD_UART1_TX_DATA__I2C1_SDA 0x4000007f
- MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x4000007f
+ MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x14
>;
};
- pinctrl_sai1: sai1grp {
+ pinctrl_touchscreen: touchscreengrp {
fsl,pins = <
- MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f
- MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f
- MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30
- MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f
+ MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x14
+ MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14
>;
};
- pinctrl_uart5: uart5grp {
- fsl,pins = <
- MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x79
- MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x79
- >;
- };
-
- pinctrl_usbotg1_pwr: usbotg_pwr {
- fsl,pins = <
- MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x14
- >;
- };
};
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
index 21973eb..3fd595a 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -1,62 +1,23 @@
-/*
- * Copyright 2017 NXP
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2017 NXP
/dts-v1/;
#include "imx7d.dtsi"
/ {
- model = "Technexion Pico i.MX7D Board";
- compatible = "technexion,imx7d-pico", "fsl,imx7d";
-
+ /* Will be filled by the bootloader */
memory@80000000 {
- reg = <0x80000000 0x80000000>;
+ device_type = "memory";
+ reg = <0x80000000 0>;
};
- reg_ap6212: regulator-ap6212 {
+ reg_wlreg_on: regulator-wlreg_on {
compatible = "regulator-fixed";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_reg_ap6212>;
- regulator-name = "AP6212";
+ pinctrl-0 = <&pinctrl_reg_wlreg_on>;
+ regulator-name = "wlreg_on";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
@@ -80,6 +41,8 @@
};
reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1_pwr>;
compatible = "regulator-fixed";
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
@@ -100,6 +63,76 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
+ usdhc2_pwrseq: usdhc2_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+ clock-names = "ext_clock";
+ };
+};
+
+&clks {
+ assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
+ <&clks IMX7D_CLKO2_ROOT_DIV>;
+ assigned-clock-parents = <&clks IMX7D_CKIL>;
+ assigned-clock-rates = <0>, <32768>;
+};
+
+&ecspi3 {
+ cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+ <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+ assigned-clock-rates = <0>, <100000000>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ phy-reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ status = "okay";
+ };
+ };
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
};
&i2c4 {
@@ -197,14 +230,100 @@
};
};
+&sai1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai1>;
+ assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+ <&clks IMX7D_SAI1_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+ assigned-clock-rates = <0>, <24576000>;
+ status = "okay";
+};
+
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm4 { /* Backlight */
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+ status = "okay";
+};
+
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart7 { /* Bluetooth */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart7>;
+ assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <®_usb_otg2_vbus>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ tuning-step = <2>;
+ vmmc-supply = <®_3p3v>;
+ wakeup-source;
+ no-1-8-v;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
&usdhc2 { /* Wifi SDIO */
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_wifi_clk>;
no-1-8-v;
non-removable;
keep-power-in-suspend;
wakeup-source;
- vmmc-supply = <®_ap6212>;
+ vmmc-supply = <®_wlreg_on>;
+ mmc-pwrseq = <&usdhc2_pwrseq>;
status = "okay";
};
@@ -230,6 +349,63 @@
};
&iomuxc {
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SCL__ECSPI3_MISO 0x2
+ MX7D_PAD_I2C1_SDA__ECSPI3_MOSI 0x2
+ MX7D_PAD_I2C2_SCL__ECSPI3_SCLK 0x2
+ MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x14
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX7D_PAD_UART1_TX_DATA__I2C1_SDA 0x4000007f
+ MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX7D_PAD_UART2_TX_DATA__I2C2_SDA 0x4000007f
+ MX7D_PAD_UART2_RX_DATA__I2C2_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3
+ MX7D_PAD_SD2_WP__ENET1_MDC 0x3
+ MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1
+ MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1
+ MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1
+ MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1
+ MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1
+ MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1
+ MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1
+ MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1
+ MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
+ MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
+ MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
+ MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
+ MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x1 /* Ethernet reset */
+ >;
+ };
+
+ pinctrl_can1: can1frp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX 0x59
+ MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX 0x59
+ >;
+ };
+
+ pinctrl_can2: can2frp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX 0x59
+ MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX 0x59
+ >;
+ };
+
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f
@@ -237,12 +413,106 @@
>;
};
- pinctrl_reg_ap6212: regap6212grp {
+ pinctrl_pwm1: pwm1 {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f
+ >;
+ };
+
+ pinctrl_pwm2: pwm2 {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7f
+ >;
+ };
+
+ pinctrl_pwm3: pwm3 {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x7f
+ >;
+ };
+
+ pinctrl_reg_wlreg_on: regregongrp {
fsl,pins = <
MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x59
>;
};
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f
+ MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f
+ MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30
+ MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x79
+ MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x79
+ >;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x79
+ MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x79
+ MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS 0x79
+ MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS 0x79
+ >;
+ };
+
+ pinctrl_uart7: uart7grp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI2_MOSI__UART7_DCE_TX 0x79
+ MX7D_PAD_ECSPI2_SCLK__UART7_DCE_RX 0x79
+ MX7D_PAD_ECSPI2_SS0__UART7_DCE_CTS 0x79
+ MX7D_PAD_ECSPI2_MISO__UART7_DCE_RTS 0x79
+ >;
+ };
+
+ pinctrl_usbotg1_pwr: usbotg_pwr {
+ fsl,pins = <
+ MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x14
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x59
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x19
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x15
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x5a
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x1a
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x15
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x5b
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x1b
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x15
+ >;
+ };
+
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX7D_PAD_SD2_CMD__SD2_CMD 0x59
@@ -301,6 +571,12 @@
};
&iomuxc_lpsr {
+ pinctrl_wifi_clk: wificlkgrp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2 0x7d
+ >;
+ };
+
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74
diff --git a/arch/arm/boot/dts/imx7d-sdb-reva.dts b/arch/arm/boot/dts/imx7d-sdb-reva.dts
new file mode 100644
index 0000000..7ce9d8c
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-sdb-reva.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx7d-sdb.dts"
+
+/ {
+ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+ pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg_reva>;
+ gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&fec2 {
+ /delete-property/phy-supply;
+};
+
+&iomuxc {
+ imx7d-sdb {
+ pinctrl_tsc2046_pendown: tsc2046_pendown {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x59
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */
+ >;
+ };
+
+ pinctrl_usb_otg2_vbus_reg_reva: usbotg2vbusregrevagrp {
+ fsl,pins = <
+ MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14
+ >;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index f1bafda..202922e 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -15,6 +15,7 @@
};
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x80000000>;
};
@@ -71,9 +72,11 @@
reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg2_vbus";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg>;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -114,6 +117,16 @@
gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
};
+ reg_fec2_3v3: regulator-fec2-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "fec2-3v3";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2_reg>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ };
+
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000 0>;
@@ -210,6 +223,7 @@
assigned-clock-rates = <0>, <100000000>;
phy-mode = "rgmii";
phy-handle = <ðphy1>;
+ phy-supply = <®_fec2_3v3>;
fsl,magic-packet;
status = "okay";
};
@@ -491,6 +505,12 @@
>;
};
+ pinctrl_enet2_reg: enet2reggrp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x14
+ >;
+ };
+
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59
@@ -513,7 +533,6 @@
pinctrl_hog: hoggrp {
fsl,pins = <
- MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14
MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */
>;
};
@@ -735,4 +754,10 @@
MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x30
>;
};
+
+ pinctrl_usb_otg2_vbus_reg: usbotg2vbusreggrp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14
+ >;
+ };
};
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 826224b..6b298e3 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -24,6 +24,15 @@
};
};
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
cpu0_opp_table: opp-table {
compatible = "operating-points-v2";
opp-shared;
@@ -72,6 +81,18 @@
};
};
};
+
+ intc: interrupt-controller@31001000 {
+ compatible = "arm,cortex-a7-gic";
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupt-parent = <&intc>;
+ reg = <0x31001000 0x1000>,
+ <0x31002000 0x2000>,
+ <0x31004000 0x2000>,
+ <0x31006000 0x2000>;
+ };
};
};
diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi
index fe8344c..1fb1ec5 100644
--- a/arch/arm/boot/dts/imx7s-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7s-colibri.dtsi
@@ -45,6 +45,7 @@
/ {
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x10000000>;
};
};
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
index f7ba2c0..23431fae 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -14,6 +14,7 @@
compatible = "warp,imx7s-warp", "fsl,imx7s";
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index aa8df7d..e88f53a 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -17,10 +17,8 @@
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
- * Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; };
aliases {
gpio0 = &gpio1;
@@ -162,10 +160,10 @@
timer {
compatible = "arm,armv7-timer";
interrupt-parent = <&intc>;
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
};
soc {
@@ -307,7 +305,7 @@
intc: interrupt-controller@31001000 {
compatible = "arm,cortex-a7-gic";
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
#interrupt-cells = <3>;
interrupt-controller;
interrupt-parent = <&intc>;
@@ -875,6 +873,7 @@
clocks = <&clks IMX7D_CLK_DUMMY>,
<&clks IMX7D_CAN1_ROOT_CLK>;
clock-names = "ipg", "per";
+ fsl,stop-mode = <&gpr 0x10 1 0x10 17>;
status = "disabled";
};
@@ -885,6 +884,7 @@
clocks = <&clks IMX7D_CLK_DUMMY>,
<&clks IMX7D_CAN2_ROOT_CLK>;
clock-names = "ipg", "per";
+ fsl,stop-mode = <&gpr 0x10 2 0x10 18>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index ca9154dd..e2b1ab9b56 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -116,6 +116,10 @@
status = "okay";
};
+&cmt0 {
+ status = "okay";
+};
+
&hsusb {
status = "okay";
pinctrl-0 = <&usb0_pins>;
@@ -230,6 +234,11 @@
};
};
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
&scif0 {
pinctrl-0 = <&scif0_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index bdd6e66..ed09412 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -324,6 +324,8 @@
trip = <&cpu_alert>;
cooling-device =
<&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT
THERMAL_NO_LIMIT>;
};
};
@@ -525,6 +527,102 @@
status = "disabled";
};
+ pwm0: pwm@29d0000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x29d0000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
+ pwm1: pwm@29e0000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x29e0000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
+ pwm2: pwm@29f0000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x29f0000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
+ pwm3: pwm@2a00000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2a00000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
+ pwm4: pwm@2a10000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2a10000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
+ pwm5: pwm@2a20000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2a20000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
+ pwm6: pwm@2a30000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2a30000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
+ pwm7: pwm@2a40000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2a40000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
wdog0: watchdog@2ad0000 {
compatible = "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
@@ -716,7 +814,7 @@
};
pcie@3400000 {
- compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
+ compatible = "fsl,ls1021a-pcie";
reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
@@ -736,10 +834,11 @@
<0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
pcie@3500000 {
- compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
+ compatible = "fsl,ls1021a-pcie";
reg = <0x00 0x03500000 0x0 0x00010000 /* controller registers */
0x48 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
@@ -759,6 +858,7 @@
<0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
can0: can@2a70000 {
@@ -812,5 +912,25 @@
#size-cells = <1>;
ranges = <0x0 0x0 0x10010000 0x10000>;
};
+
+ qdma: dma-controller@8390000 {
+ compatible = "fsl,ls1021a-qdma";
+ reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
+ <0x0 0x8389000 0x0 0x1000>, /* Status regs */
+ <0x0 0x838a000 0x0 0x2000>; /* Block regs */
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "qdma-error",
+ "qdma-queue0", "qdma-queue1";
+ dma-channels = <8>;
+ block-number = <1>;
+ block-offset = <0x1000>;
+ fsl,dma-queues = <2>;
+ status-sizes = <64>;
+ queue-sizes = <64 64>;
+ big-endian;
+ };
+
};
};
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 0d9faf1..0839da0 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -197,10 +197,13 @@
interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
};
- timer@9940 {
+ timer_abcde: timer@9940 {
compatible = "amlogic,meson6-timer";
reg = <0x9940 0x18>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
};
};
diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts
index 9444b0d..fc48cff7 100644
--- a/arch/arm/boot/dts/meson6-atv1200.dts
+++ b/arch/arm/boot/dts/meson6-atv1200.dts
@@ -56,6 +56,10 @@
serial0 = &uart_AO;
};
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
memory {
reg = <0x40000000 0x80000000>;
};
diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi
index 9b46321..ca978ab 100644
--- a/arch/arm/boot/dts/meson6.dtsi
+++ b/arch/arm/boot/dts/meson6.dtsi
@@ -88,6 +88,11 @@
status = "disabled";
};
+&timer_abcde {
+ clocks = <&xtal>, <&clk81>;
+ clock-names = "xtal", "pclk";
+};
+
&uart_AO {
clocks = <&xtal>, <&clk81>, <&clk81>;
clock-names = "xtal", "pclk", "baud";
diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
index 8bceb8d..55fb090 100644
--- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts
+++ b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
@@ -52,6 +52,10 @@
serial0 = &uart_AO;
};
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
memory {
reg = <0x40000000 0x80000000>;
};
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 7162e0c..3be5fbd 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -163,6 +163,7 @@
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
+ bias-disable;
};
};
@@ -170,6 +171,7 @@
mux {
groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
function = "i2c_mst_ao";
+ bias-disable;
};
};
@@ -177,6 +179,7 @@
mux {
groups = "remote_input";
function = "remote";
+ bias-disable;
};
};
@@ -184,6 +187,7 @@
mux {
groups = "pwm_f_ao";
function = "pwm_f_ao";
+ bias-disable;
};
};
};
@@ -238,6 +242,7 @@
groups = "sd_d0_a", "sd_d1_a", "sd_d2_a",
"sd_d3_a", "sd_clk_a", "sd_cmd_a";
function = "sd_a";
+ bias-disable;
};
};
@@ -246,6 +251,7 @@
groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
"sd_d3_b", "sd_clk_b", "sd_cmd_b";
function = "sd_b";
+ bias-disable;
};
};
@@ -254,6 +260,7 @@
groups = "sd_d0_c", "sd_d1_c", "sd_d2_c",
"sd_d3_c", "sd_clk_c", "sd_cmd_c";
function = "sd_c";
+ bias-disable;
};
};
@@ -261,6 +268,7 @@
mux {
groups = "nor_d", "nor_q", "nor_c", "nor_cs";
function = "nor";
+ bias-disable;
};
};
@@ -272,6 +280,7 @@
"eth_rxd1", "eth_rxd0", "eth_mdio",
"eth_mdc";
function = "ethernet";
+ bias-disable;
};
};
@@ -279,6 +288,7 @@
mux {
groups = "pwm_e";
function = "pwm_e";
+ bias-disable;
};
};
@@ -287,6 +297,7 @@
groups = "uart_tx_a1",
"uart_rx_a1";
function = "uart_a";
+ bias-disable;
};
};
@@ -295,6 +306,7 @@
groups = "uart_cts_a1",
"uart_rts_a1";
function = "uart_a";
+ bias-disable;
};
};
};
@@ -375,6 +387,11 @@
clocks = <&clkc CLKID_CLK81>;
};
+&timer_abcde {
+ clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "pclk";
+};
+
&uart_AO {
compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts
index c7fdaea..5c9b76a 100644
--- a/arch/arm/boot/dts/meson8b-mxq.dts
+++ b/arch/arm/boot/dts/meson8b-mxq.dts
@@ -55,6 +55,10 @@
serial0 = &uart_AO;
};
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
memory {
reg = <0x40000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index cd1ca9d..587a855f 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -146,6 +146,7 @@
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
+ bias-disable;
};
};
@@ -153,6 +154,7 @@
mux {
groups = "remote_input";
function = "remote";
+ bias-disable;
};
};
};
@@ -220,6 +222,7 @@
"eth_txd2",
"eth_txd3";
function = "ethernet";
+ bias-disable;
};
};
@@ -235,6 +238,7 @@
"eth_mdio_en",
"eth_mdc";
function = "ethernet";
+ bias-disable;
};
};
@@ -242,6 +246,7 @@
mux {
groups = "i2c_sda_a", "i2c_sck_a";
function = "i2c_a";
+ bias-disable;
};
};
@@ -250,6 +255,7 @@
groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
"sd_d3_b", "sd_clk_b", "sd_cmd_b";
function = "sd_b";
+ bias-disable;
};
};
@@ -257,6 +263,7 @@
mux {
groups = "pwm_c1";
function = "pwm_c";
+ bias-disable;
};
};
@@ -265,6 +272,7 @@
groups = "uart_tx_b0",
"uart_rx_b0";
function = "uart_b";
+ bias-disable;
};
};
@@ -273,6 +281,7 @@
groups = "uart_cts_b0",
"uart_rts_b0";
function = "uart_b";
+ bias-disable;
};
};
};
@@ -361,6 +370,11 @@
clock-names = "core", "clkin";
};
+&timer_abcde {
+ clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "pclk";
+};
+
&uart_AO {
compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
diff --git a/arch/arm/boot/dts/meson8m2.dtsi b/arch/arm/boot/dts/meson8m2.dtsi
index 3e1f922..d1a28c2 100644
--- a/arch/arm/boot/dts/meson8m2.dtsi
+++ b/arch/arm/boot/dts/meson8m2.dtsi
@@ -45,6 +45,7 @@
"eth_rxd1", "eth_rxd0",
"eth_mdio", "eth_mdc";
function = "ethernet";
+ bias-disable;
};
};
};
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 766bbb8..ee03e08 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -117,6 +117,60 @@
reg-names = "mux status", "mux mask";
mrvl,intc-nr-irqs = <2>;
};
+
+ usb_otg_phy0: usb-otg-phy@d4207000 {
+ compatible = "marvell,mmp2-usb-phy";
+ reg = <0xd4207000 0x40>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usb_otg0: usb-otg@d4208000 {
+ compatible = "marvell,pxau2o-ehci";
+ reg = <0xd4208000 0x200>;
+ interrupts = <44>;
+ clocks = <&soc_clocks MMP2_CLK_USB>;
+ clock-names = "USBCLK";
+ phys = <&usb_otg_phy0>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ mmc1: mmc@d4280000 {
+ compatible = "mrvl,pxav3-mmc";
+ reg = <0xd4280000 0x120>;
+ clocks = <&soc_clocks MMP2_CLK_SDH0>;
+ clock-names = "io";
+ interrupts = <39>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@d4280800 {
+ compatible = "mrvl,pxav3-mmc";
+ reg = <0xd4280800 0x120>;
+ clocks = <&soc_clocks MMP2_CLK_SDH1>;
+ clock-names = "io";
+ interrupts = <52>;
+ status = "disabled";
+ };
+
+ mmc3: mmc@d4281000 {
+ compatible = "mrvl,pxav3-mmc";
+ reg = <0xd4281000 0x120>;
+ clocks = <&soc_clocks MMP2_CLK_SDH2>;
+ clock-names = "io";
+ interrupts = <53>;
+ status = "disabled";
+ };
+
+ mmc4: mmc@d4281800 {
+ compatible = "mrvl,pxav3-mmc";
+ reg = <0xd4281800 0x120>;
+ clocks = <&soc_clocks MMP2_CLK_SDH3>;
+ clock-names = "io";
+ interrupts = <54>;
+ status = "disabled";
+ };
};
apb@d4000000 { /* APB */
@@ -130,6 +184,7 @@
compatible = "mrvl,mmp-timer";
reg = <0xd4014000 0x100>;
interrupts = <13>;
+ clocks = <&soc_clocks MMP2_CLK_TIMER>;
};
uart1: uart@d4030000 {
@@ -168,7 +223,7 @@
status = "disabled";
};
- gpio@d4019000 {
+ gpio: gpio@d4019000 {
compatible = "marvell,mmp2-gpio";
#address-cells = <1>;
#size-cells = <1>;
@@ -180,7 +235,7 @@
clocks = <&soc_clocks MMP2_CLK_GPIO>;
resets = <&soc_clocks MMP2_CLK_GPIO>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
ranges;
gcb0: gpio@d4019000 {
@@ -220,12 +275,64 @@
status = "disabled";
};
- twsi2: i2c@d4025000 {
+ twsi2: i2c@d4031000 {
compatible = "mrvl,mmp-twsi";
- reg = <0xd4025000 0x1000>;
- interrupts = <58>;
+ reg = <0xd4031000 0x1000>;
+ interrupt-parent = <&intcmux17>;
+ interrupts = <0>;
clocks = <&soc_clocks MMP2_CLK_TWSI1>;
resets = <&soc_clocks MMP2_CLK_TWSI1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ twsi3: i2c@d4032000 {
+ compatible = "mrvl,mmp-twsi";
+ reg = <0xd4032000 0x1000>;
+ interrupt-parent = <&intcmux17>;
+ interrupts = <1>;
+ clocks = <&soc_clocks MMP2_CLK_TWSI2>;
+ resets = <&soc_clocks MMP2_CLK_TWSI2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ twsi4: i2c@d4033000 {
+ compatible = "mrvl,mmp-twsi";
+ reg = <0xd4033000 0x1000>;
+ interrupt-parent = <&intcmux17>;
+ interrupts = <2>;
+ clocks = <&soc_clocks MMP2_CLK_TWSI3>;
+ resets = <&soc_clocks MMP2_CLK_TWSI3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+
+ twsi5: i2c@d4033800 {
+ compatible = "mrvl,mmp-twsi";
+ reg = <0xd4033800 0x1000>;
+ interrupt-parent = <&intcmux17>;
+ interrupts = <3>;
+ clocks = <&soc_clocks MMP2_CLK_TWSI4>;
+ resets = <&soc_clocks MMP2_CLK_TWSI4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ twsi6: i2c@d4034000 {
+ compatible = "mrvl,mmp-twsi";
+ reg = <0xd4034000 0x1000>;
+ interrupt-parent = <&intcmux17>;
+ interrupts = <4>;
+ clocks = <&soc_clocks MMP2_CLK_TWSI5>;
+ resets = <&soc_clocks MMP2_CLK_TWSI5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -239,6 +346,38 @@
resets = <&soc_clocks MMP2_CLK_RTC>;
status = "disabled";
};
+
+ ssp1: ssp@d4035000 {
+ compatible = "marvell,mmp2-ssp";
+ reg = <0xd4035000 0x1000>;
+ clocks = <&soc_clocks MMP2_CLK_SSP0>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ ssp2: ssp@d4036000 {
+ compatible = "marvell,mmp2-ssp";
+ reg = <0xd4036000 0x1000>;
+ clocks = <&soc_clocks MMP2_CLK_SSP1>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ ssp3: ssp@d4037000 {
+ compatible = "marvell,mmp2-ssp";
+ reg = <0xd4037000 0x1000>;
+ clocks = <&soc_clocks MMP2_CLK_SSP2>;
+ interrupts = <20>;
+ status = "disabled";
+ };
+
+ ssp4: ssp@d4039000 {
+ compatible = "marvell,mmp2-ssp";
+ reg = <0xd4039000 0x1000>;
+ clocks = <&soc_clocks MMP2_CLK_SSP3>;
+ interrupts = <21>;
+ status = "disabled";
+ };
};
soc_clocks: clocks{
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index d5fe553..e53d326 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -382,7 +382,7 @@
OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */
OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */
/* mcbsp_clks is used as PENIRQ */
- /* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp_clks */
+ /* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0) mcbsp_clks.mcbsp_clks */
OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp1_fsx */
OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0) /* mcbsp1_clkx.mcbsp1_clkx */
>;
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
index 3228ad5..ccbecad 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -35,7 +35,7 @@
clocks = <&clks CLK_NONE>;
};
- pxa27x_ohci: usb@4c000000 {
+ usb0: usb@4c000000 {
compatible = "marvell,pxa-ohci";
reg = <0x4c000000 0x10000>;
interrupts = <3>;
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi
index 080d5c51..e83879d 100644
--- a/arch/arm/boot/dts/pxa2xx.dtsi
+++ b/arch/arm/boot/dts/pxa2xx.dtsi
@@ -43,8 +43,6 @@
};
cpus {
- #address-cells = <0>;
- #size-cells = <0>;
cpu {
compatible = "marvell,xscale";
device_type = "cpu";
@@ -119,9 +117,9 @@
status = "disabled";
};
- hwuart: serial@41100000 {
+ hwuart: serial@41600000 {
compatible = "mrvl,pxa-uart";
- reg = <0x41100000 0x30>;
+ reg = <0x41600000 0x30>;
interrupts = <7>;
status = "disabled";
};
@@ -136,13 +134,6 @@
status = "disabled";
};
- usb0: ohci@4c000000 {
- compatible = "marvell,pxa-ohci";
- reg = <0x4c000000 0x10000>;
- interrupts = <3>;
- status = "disabled";
- };
-
mmc0: mmc@41100000 {
compatible = "marvell,pxa-mmc";
reg = <0x41100000 0x1000>;
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi
new file mode 100644
index 0000000..8ac24e3
--- /dev/null
+++ b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi
@@ -0,0 +1,405 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "pxa3xx.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ /* Will be overridden by bootloader */
+ hw-revision = <0>;
+
+ chosen {
+ bootargs = "root=ubi0:RootFS rootfstype=ubifs rw ubi.mtd=3";
+ stdout-path = &ffuart;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0xa0000000 0x8000000>; /* 128 MB */
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3-fixed-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8-fixed-supply";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_va_5v0: regulator-va-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "va-5v0-fixed-supply";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 124 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ ssp_dai0: ssp-dai0 {
+ compatible = "mrvl,pxa-ssp-dai";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ssp0_dai_pins>;
+ port = <&ssp1>;
+ #sound-dai-cells = <0>;
+ dmas = <&pdma 13 3
+ &pdma 14 3>;
+ dma-names = "rx", "tx";
+ clock-names = "extclk";
+ };
+
+ ssp_dai1: ssp-dai1 {
+ compatible = "mrvl,pxa-ssp-dai";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ssp1_dai_pins>;
+ port = <&ssp2>;
+ #sound-dai-cells = <0>;
+ dmas = <&pdma 15 3
+ &pdma 16 3>;
+ dma-names = "rx", "tx";
+ clock-names = "extclk";
+ };
+
+ spi: spi {
+ compatible = "spi-gpio";
+ #address-cells = <0x1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins>;
+ gpio-sck = <&gpio 95 GPIO_ACTIVE_HIGH>;
+ gpio-miso = <&gpio 98 GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&gpio 97 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <
+ &gpio 34 GPIO_ACTIVE_HIGH
+ &gpio 125 GPIO_ACTIVE_HIGH
+ &gpio 96 GPIO_ACTIVE_HIGH
+ >;
+ num-chipselects = <3>;
+
+ dac: dac@2 {
+ compatible = "ti,dac7512";
+ reg = <2>;
+ spi-max-frequency = <1000000>;
+ vcc-supply = <®_3v3>;
+ };
+ };
+
+ keys: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pins>;
+
+ on-off {
+ label = "on_off button";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_F6>;
+ };
+
+ rescue-boot {
+ label = "rescue boot button";
+ gpios = <&gpio 115 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_F4>;
+ };
+
+ setup {
+ label = "setup";
+ gpios = <&gpio 119 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_F3>;
+ };
+ };
+
+ rotary: rotary-encoder {
+ compatible = "rotary-encoder";
+ gpios = <
+ &gpio 19 GPIO_ACTIVE_LOW
+ &gpio 20 GPIO_ACTIVE_HIGH
+ >;
+ linux,axis = <REL_X>;
+ rotary-encoder,relative-axis;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_a &led_pins_b>;
+
+ left {
+ label = "raumfeld:1";
+ gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+ };
+
+ right {
+ label = "raumfeld:2";
+ gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-names = "default";
+ pinctrl-0 = <&poweroff_pins>;
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ mmc0_pwrseq: mmc-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pwrseq_pins>;
+ reset-gpios = <
+ &gpio 113 GPIO_ACTIVE_LOW /* W2W_RESET */
+ &gpio 114 GPIO_ACTIVE_LOW /* W2W_PDN */
+ >;
+ };
+
+ ethernet: ethernet@10000000 {
+ compatible = "smsc,lan9115";
+ pinctrl-names = "default";
+ pinctrl-0 = <&smsc_pins &smsc_bus_pins>;
+ reg = <0x10000000 0x100000>;
+ phy-mode = "mii";
+ interrupt-parent = <&gpio>;
+ interrupts = <40 IRQ_TYPE_EDGE_FALLING>;
+ vdd33a-supply = <®_3v3>;
+ vddvario-supply = <®_1v8>;
+ reset-gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+ reg-io-width = <4>;
+ smsc,save-mac-address;
+ smsc,irq-push-pull;
+ };
+};
+
+&ffuart {
+ status = "okay";
+};
+
+&pwri2c {
+ status = "okay";
+
+ max8660: regulator@34 {
+ compatible = "maxim,max8660";
+ reg = <0x34>;
+
+ regulators {
+ regulator-v3 {
+ regulator-compatible= "V3(DCDC)";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator-v4 {
+ regulator-compatible= "V4(DCDC)";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator-v5 {
+ regulator-compatible= "V5(LDO)";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ reg_vcc_sdio: regulator-v6 {
+ regulator-compatible= "V6(LDO)";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator-v7 {
+ regulator-compatible= "V7(LDO)";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+};
+
+&pxai2c1 {
+ status = "okay";
+ mrvl,i2c-fast-mode;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pxai2c1_pins>;
+};
+
+&ssp1 {
+ status = "okay";
+};
+
+&ssp2 {
+ status = "okay";
+};
+
+&nand_controller {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ nand-rb = <0>;
+ nand-ecc-mode = "hw";
+ marvell,nand-keep-config;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Bootloader";
+ reg = <0x0000000 0xa0000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "BootloaderEnvironment";
+ reg = <0x0a0000 0x20000>;
+ };
+
+ partition@c0000 {
+ label = "BootloaderSplashScreen";
+ reg = <0x0c0000 0x60000>;
+ };
+
+ partition@120000 {
+ label = "UBI";
+ reg = <0x120000 0x7ee0000>;
+ };
+ };
+ };
+};
+
+&usb0 {
+ status = "okay";
+ marvell,enable-port1;
+ marvell,port-mode = <2>; /* PMM_GLOBAL_MODE */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pxa3xx_ohci_pins>;
+};
+
+&mmc0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ pxa-mmc,detect-delay-ms = <200>;
+ vmmc-supply = <®_vcc_sdio>;
+ mmc-pwrseq = <&mmc0_pwrseq>;
+ non-removable;
+ bus-width = <4>;
+};
+
+&pinctrl {
+ poweroff_pins: poweroff-pins {
+ pinctrl-single,pins = <MFP_PIN_PXA300(16) MFP_AF0>;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+ };
+
+ led_pins_a: led-pins-a {
+ pinctrl-single,pins = <MFP_PIN_PXA300(35) MFP_AF0>;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ led_pins_b: led-pins-b {
+ pinctrl-single,pins = <MFP_PIN_PXA300(36) MFP_AF0>;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH);
+ };
+
+ pxai2c1_pins: pxai2c1-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(21) MFP_AF1 /* I2C_SCL */
+ MFP_PIN_PXA300(22) MFP_AF1 /* I2C_SDA */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
+ };
+
+ gpio_keys_pins: gpio-keys-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(14) MFP_AF0 /* SCK */
+ MFP_PIN_PXA300(115) MFP_AF0 /* MOSI */
+ MFP_PIN_PXA300(119) MFP_AF0 /* MISO */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+ };
+
+ spi_pins: spi-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(95) MFP_AF0 /* SCK */
+ MFP_PIN_PXA300(97) MFP_AF0 /* MOSI */
+ MFP_PIN_PXA300(98) MFP_AF0 /* MISO */
+ MFP_PIN_PXA300(34) MFP_AF0 /* CS#0 */
+ MFP_PIN_PXA300(125) MFP_AF0 /* CS#1 */
+ MFP_PIN_PXA300(96) MFP_AF0 /* CS#2 */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ pxa3xx_ohci_pins: pxa3xx-ohci-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300_2(0) MFP_AF1 /* USBHPEN */
+ MFP_PIN_PXA300_2(1) MFP_AF1 /* USBHPWR */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ smsc_pins: smsc-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(39) MFP_AF0 /* RESET */
+ MFP_PIN_PXA300(40) MFP_AF0 /* IRQ */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ smsc_bus_pins: smsc-bus-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(1) MFP_AF1 /* nCS2 */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+ };
+
+ mmc0_pins: mmc0-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(3) MFP_AF4 /* MMC1_DAT0 */
+ MFP_PIN_PXA300(4) MFP_AF4 /* MMC1_DAT1 */
+ MFP_PIN_PXA300(5) MFP_AF4 /* MMC1_DAT2 */
+ MFP_PIN_PXA300(6) MFP_AF4 /* MMC1_DAT3 */
+ MFP_PIN_PXA300(7) MFP_AF4 /* MMC1_CLK */
+ MFP_PIN_PXA300(8) MFP_AF4 /* MMC1_CMD */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH);
+ };
+
+ mmc0_pwrseq_pins: mmc0-pwrseq-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(113) MFP_AF0 /* W2W_RESET */
+ MFP_PIN_PXA300(114) MFP_AF0 /* W2W_PDN */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+ };
+
+ ssp0_dai_pins: ssp0-dai-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(85) MFP_AF1 /* SSP1_SCLK */
+ MFP_PIN_PXA300(86) MFP_AF1 /* SSP1_FRM */
+ MFP_PIN_PXA300(87) MFP_AF1 /* SSP1_TXD */
+ MFP_PIN_PXA300(88) MFP_AF1 /* SSP1_RXD */
+ MFP_PIN_PXA300(89) MFP_AF1 /* SSP1_EXTCLK */
+ MFP_PIN_PXA300(90) MFP_AF1 /* SSP1_SYSCLK */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ ssp1_dai_pins: ssp1-dai-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(25) MFP_AF2 /* SSP2_SCLK */
+ MFP_PIN_PXA300(26) MFP_AF2 /* SSP2_FRM */
+ MFP_PIN_PXA300(27) MFP_AF2 /* SSP2_TXD */
+ MFP_PIN_PXA300(29) MFP_AF2 /* SSP2_EXTCLK */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-connector.dts b/arch/arm/boot/dts/pxa300-raumfeld-connector.dts
new file mode 100644
index 0000000..3e94454
--- /dev/null
+++ b/arch/arm/boot/dts/pxa300-raumfeld-connector.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+#include "pxa300-raumfeld-tuneable-clock.dtsi"
+
+/ {
+ model = "Raumfeld Connector (PXA3xx)";
+ compatible = "raumfeld,raumfeld-connector-pxa303", "marvell,pxa300";
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Raumfeld Connector";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ simple-audio-card,dai-link@0 {
+ reg = <0>;
+ format = "i2s";
+ bitclock-master = <&dailink_master_analog>;
+ frame-master = <&dailink_master_analog>;
+ mclk-fs = <256>;
+
+ dailink_master_analog: cpu {
+ sound-dai = <&ssp_dai0>;
+ };
+
+ codec {
+ sound-dai = <&cs4270>;
+ };
+ };
+
+ simple-audio-card,dai-link@1 {
+ reg = <1>;
+ format = "i2s";
+ bitclock-master = <&dailink_master_digital>;
+ frame-master = <&dailink_master_digital>;
+ mclk-fs = <256>;
+
+ dailink_master_digital: cpu {
+ sound-dai = <&ssp_dai1>;
+ };
+
+ codec {
+ sound-dai = <&ak4104>;
+ };
+ };
+ };
+};
+
+&ssp1 {
+ status = "okay";
+};
+
+&ssp2 {
+ status = "okay";
+};
+
+&spi {
+ ak4104: optical-transmitter@0 {
+ compatible = "asahi-kasei,ak4104";
+ reg = <0>;
+ vdd-supply = <®_3v3>;
+ spi-max-frequency = <5000000>;
+ reset-gpios = <&gpio 38 GPIO_ACTIVE_HIGH>;
+ #sound-dai-cells = <0>;
+ };
+};
+
+&rotary {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-controller.dts b/arch/arm/boot/dts/pxa300-raumfeld-controller.dts
new file mode 100644
index 0000000..65d8250
--- /dev/null
+++ b/arch/arm/boot/dts/pxa300-raumfeld-controller.dts
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+
+/ {
+ model = "Raumfeld Controller (PXA3xx)";
+ compatible = "raumfeld,raumfeld-controller-pxa303", "marvell,pxa300";
+
+ reg_vbatt: regulator-vbatt {
+ compatible = "regulator-fixed";
+ regulator-name = "vbatt-fixed-supply";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ };
+
+ lcd_supply: regulator-va-tft {
+ compatible = "regulator-fixed";
+ regulator-name = "va-tft-fixed-supply";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ onewire {
+ compatible = "w1-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&w1_pins>;
+ gpios = <
+ &gpio 126 GPIO_OPEN_DRAIN /* W1 I/O */
+ &gpio 105 GPIO_ACTIVE_HIGH /* pullup */
+ >;
+
+ w1_ds2760: slave-ds2760 {
+ compatible = "maxim,ds2760";
+ power-supplies = <&charger>;
+ };
+ };
+
+ charger: charger {
+ compatible = "gpio-charger";
+ charger-type = "mains";
+ gpios = <&gpio 101 GPIO_ACTIVE_LOW>;
+ };
+
+ /*
+ * One of the following two will be set to "okay" by the bootloader,
+ * depending on the hardware revision.
+ */
+ backlight-controller-pwm {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins>;
+ pwms = <&pwm0 10000>;
+ power-supply = <®_vbatt>;
+ status = "disabled";
+
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100
+ >;
+ default-brightness-level = <100>;
+ };
+
+ backlight-controller {
+ compatible = "lltc,lt3593";
+ pinctrl-names = "default";
+ pinctrl-0 = <<3593_pins>;
+ lltc,ctrl-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+
+ led {
+ label = "backlight";
+ default-state = "on";
+ };
+ };
+};
+
+®_va_5v0 {
+ status = "disabled";
+};
+
+ðernet {
+ status = "disabled";
+};
+
+&leds {
+ status = "disabled";
+};
+
+&dac {
+ status = "disabled";
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&keys {
+ dock-detect {
+ label = "dock detect";
+ gpios = <&gpio 116 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_F5>;
+ };
+};
+
+&spi {
+ accelerometer@1 {
+ compatible = "st,lis302dl-spi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lis302_pins>;
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ interrupt-parent = <&gpio>;
+ interrupts = <104 IRQ_TYPE_EDGE_FALLING>;
+
+ st,click-single-x;
+ st,click-single-y;
+ st,click-single-z;
+ st,click-thresh-x = <10>;
+ st,click-thresh-y = <10>;
+ st,click-thresh-z = <10>;
+ st,irq1-click;
+ st,irq2-click;
+ st,wakeup-x-lo;
+ st,wakeup-x-hi;
+ st,wakeup-y-lo;
+ st,wakeup-y-hi;
+ st,wakeup-z-lo;
+ st,wakeup-z-hi;
+ };
+};
+
+&lcdc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdc_pins>;
+ lcd-supply = <&lcd_supply>;
+
+ port {
+ lcdc_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ bus-width = <16>;
+ };
+ };
+
+ panel {
+ compatible = "sharp,lq043t3dx0-panel";
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing {
+ clock-frequency = <9009000>;
+ pixelclk-active = <0>; /* negative edge */
+ hactive = <480>;
+ vactive = <272>;
+ hsync-len = <41>;
+ hback-porch = <2>;
+ hfront-porch = <1>;
+ vsync-len = <10>;
+ vback-porch = <3>;
+ vfront-porch = <1>;
+ };
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lcdc_out>;
+ };
+ };
+ };
+};
+
+&gcu {
+ status = "okay";
+};
+
+&pxai2c1 {
+ touchscreen@a {
+ compatible = "eeti,exc3000-i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&eeti_ts_pins>;
+ reg = <0xa>;
+ interrupt-parent = <&gpio>;
+ interrupts = <32 IRQ_TYPE_EDGE_RISING>;
+ attn-gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
+ touchscreen-inverted-y;
+ };
+};
+
+&pinctrl {
+ lis302_pins: lis302-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(104) MFP_AF0 /* IRQ */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ eeti_ts_pins: eeti-ts-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(32) MFP_AF0 /* IRQ */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+ };
+
+ lt3593_pins: lt3593-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(17) MFP_AF0 /* Backlight */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ pwm0_pins: pwm0-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(17) MFP_AF1 /* PWM */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ w1_pins: w1-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(126) MFP_AF0 /* PWM */
+ MFP_PIN_PXA300(105) MFP_AF0 /* PWM */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+ };
+
+ lcdc_pins: lcdc-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(54) MFP_AF1 /* LDD_0 */
+ MFP_PIN_PXA300(55) MFP_AF1 /* LDD_1 */
+ MFP_PIN_PXA300(56) MFP_AF1 /* LDD_2 */
+ MFP_PIN_PXA300(57) MFP_AF1 /* LDD_3 */
+ MFP_PIN_PXA300(58) MFP_AF1 /* LDD_4 */
+ MFP_PIN_PXA300(59) MFP_AF1 /* LDD_5 */
+ MFP_PIN_PXA300(60) MFP_AF1 /* LDD_6 */
+ MFP_PIN_PXA300(61) MFP_AF1 /* LDD_7 */
+ MFP_PIN_PXA300(62) MFP_AF1 /* LDD_8 */
+ MFP_PIN_PXA300(63) MFP_AF1 /* LDD_9 */
+ MFP_PIN_PXA300(64) MFP_AF1 /* LDD_10 */
+ MFP_PIN_PXA300(65) MFP_AF1 /* LDD_11 */
+ MFP_PIN_PXA300(66) MFP_AF1 /* LDD_12 */
+ MFP_PIN_PXA300(67) MFP_AF1 /* LDD_13 */
+ MFP_PIN_PXA300(68) MFP_AF1 /* LDD_14 */
+ MFP_PIN_PXA300(69) MFP_AF1 /* LDD_15 */
+ MFP_PIN_PXA300(70) MFP_AF1 /* LDD_16 */
+ MFP_PIN_PXA300(71) MFP_AF1 /* LDD_17 */
+ MFP_PIN_PXA300(72) MFP_AF1 /* LCD_FCLK */
+ MFP_PIN_PXA300(73) MFP_AF1 /* LCD_LCLK */
+ MFP_PIN_PXA300(74) MFP_AF1 /* LCD_PCLK */
+ MFP_PIN_PXA300(75) MFP_AF1 /* LCD_BIAS */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-l.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-l.dts
new file mode 100644
index 0000000..5a0f7f1
--- /dev/null
+++ b/arch/arm/boot/dts/pxa300-raumfeld-speaker-l.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+#include "pxa300-raumfeld-tuneable-clock.dtsi"
+
+/ {
+ model = "Raumfeld Speaker L (PXA3xx)";
+ compatible = "raumfeld,raumfeld-speaker-l-pxa303", "marvell,pxa300";
+};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-m.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-m.dts
new file mode 100644
index 0000000..fa10d89
--- /dev/null
+++ b/arch/arm/boot/dts/pxa300-raumfeld-speaker-m.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+#include "pxa300-raumfeld-tuneable-clock.dtsi"
+
+/ {
+ model = "Raumfeld Speaker M (PXA3xx)";
+ compatible = "raumfeld,raumfeld-speaker-m-pxa303", "marvell,pxa300";
+};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts
new file mode 100644
index 0000000..5f9e375
--- /dev/null
+++ b/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+
+/ {
+ model = "Raumfeld Speaker One (PXA3xx)";
+ compatible = "raumfeld,raumfeld-speaker-one-pxa303", "marvell,pxa300";
+
+ wm8782: wm8782 {
+ compatible = "wm8782";
+ #sound-dai-cells = <0>;
+ Vdd-supply = <®_3v3>;
+ Vdda-supply = <®_va_5v0>;
+ };
+
+ xo_11mhz: oscillator-11mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ clock-accuracy = <100>;
+ };
+
+ xo_audio: clock-gate {
+ compatible = "gpio-gate-clock";
+ pinctrlnames = "default";
+ pinctrl-0 = <&xo_audio_pins>;
+ clocks = <&xo_11mhz>;
+ #clock-cells = <0>;
+ enable-gpios = <&gpio 111 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_va_30v0: regulator-va-30v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "va-30v0-fixed-supply";
+ regulator-min-microvolt = <30000000>;
+ regulator-max-microvolt = <30000000>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Raumfeld Speaker";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ simple-audio-card,dai-link@0 {
+ reg = <0>;
+ format = "i2s";
+ bitclock-master = <&dailink_master_analog_out>;
+ frame-master = <&dailink_master_analog_out>;
+ mclk-fs = <256>;
+
+ dailink_master_analog_out: cpu {
+ sound-dai = <&ssp_dai0>;
+ };
+
+ codec {
+ sound-dai = <&sta320>;
+ };
+ };
+
+ simple-audio-card,dai-link@1 {
+ reg = <1>;
+ format = "i2s";
+ bitclock-master = <&dailink_master_analog_in>;
+ frame-master = <&dailink_master_analog_in>;
+ mclk-fs = <256>;
+
+ dailink_master_analog_in: cpu {
+ sound-dai = <&ssp_dai0>;
+ };
+
+ codec {
+ sound-dai = <&wm8782>;
+ };
+ };
+ };
+};
+
+&ssp_dai0 {
+ clocks = <&xo_audio>;
+};
+
+&spi {
+ dac@2 {
+ compatible = "ti,dac7512";
+ reg = <2>;
+ spi-max-frequency = <1000000>;
+ vcc-supply = <®_3v3>;
+ };
+};
+
+&rotary {
+ status = "okay";
+};
+
+&pxai2c1 {
+ sta320: codec@1a {
+ compatible = "st,sta32x";
+ reg = <0x1a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sta320_pins>;
+ clocks = <&xo_audio>;
+ clock-names = "xti";
+ reset-gpios = <&gpio 120 GPIO_ACTIVE_HIGH>;
+ Vdda-supply = <®_3v3>;
+ Vdd3-supply = <®_3v3>;
+ Vcc-supply = <®_va_30v0>;
+ #sound-dai-cells = <0>;
+ st,thermal-warning-adjustment;
+ st,thermal-warning-recovery;
+ st,fault-detect-recovery;
+ st,drop-compensation-ns = <80>;
+ st,max-power-use-mpcc;
+ st,invalid-input-detect-mute;
+ /* 2 (half-bridge) and 1 (full-bridge) on-board power */
+ st,output-conf = /bits/ 8 <0x1>;
+ st,needs_esd_watchdog;
+ };
+};
+
+&pinctrl {
+ xo_audio_pins: xo-audio-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(111) MFP_AF0 /* ENABLE */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ sta320_pins: sta320-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(120) MFP_AF0 /* CODEC_RESET */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+ };
+};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-s.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-s.dts
new file mode 100644
index 0000000..36e20cb
--- /dev/null
+++ b/arch/arm/boot/dts/pxa300-raumfeld-speaker-s.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+#include "pxa300-raumfeld-tuneable-clock.dtsi"
+
+/ {
+ model = "Raumfeld Speaker S (PXA3xx)";
+ compatible = "raumfeld,raumfeld-speaker-s-pxa303", "marvell,pxa300";
+};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-tuneable-clock.dtsi b/arch/arm/boot/dts/pxa300-raumfeld-tuneable-clock.dtsi
new file mode 100644
index 0000000..561483b
--- /dev/null
+++ b/arch/arm/boot/dts/pxa300-raumfeld-tuneable-clock.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/maxim,max9485.h>
+
+/ {
+ xo_27mhz: oscillator-27mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ clock-accuracy = <100>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Raumfeld Speaker";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ simple-audio-card,dai-link@0 {
+ reg = <0>;
+ format = "i2s";
+ bitclock-master = <&dailink_master_analog>;
+ frame-master = <&dailink_master_analog>;
+ mclk-fs = <256>;
+
+ dailink_master_analog: cpu {
+ sound-dai = <&ssp_dai0>;
+ };
+
+ codec {
+ sound-dai = <&cs4270>;
+ };
+ };
+ };
+};
+
+&ssp_dai0 {
+ clocks = <&max9485 MAX9485_CLKOUT1>;
+};
+
+&ssp_dai1 {
+ clocks = <&max9485 MAX9485_CLKOUT1>;
+};
+
+&pxai2c1 {
+ cs4270: codec@48 {
+ compatible = "cirrus,cs4270";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cs4270_pins>;
+ reg = <0x48>;
+ va-supply = <®_va_5v0>;
+ vd-supply = <®_3v3>;
+ vlc-supply = <®_3v3>;
+ reset-gpios = <&gpio 120 GPIO_ACTIVE_HIGH>;
+ #sound-dai-cells = <0>;
+ };
+
+ max9485: clock-generator@63 {
+ compatible = "maxim,max9485";
+ pinctrl-names = "default";
+ pinctrl-0 = <&max9485_pins>;
+ reg = <0x63>;
+ vdd-supply = <®_3v3>;
+ clock-names = "xclk";
+ clocks = <&xo_27mhz>;
+ reset-gpios = <&gpio 111 GPIO_ACTIVE_HIGH>;
+ #clock-cells = <1>;
+ };
+};
+
+&pinctrl {
+ cs4270_pins: cs4270-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(120) MFP_AF0 /* RESET */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ max9485_pins: max9485-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(111) MFP_AF0 /* RESET */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+};
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
index 3a8f0ed..e1e607f 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -151,8 +151,6 @@
pinctrl: pinctrl@40e10000 {
compatible = "pinconf-single";
reg = <0x40e10000 0xffff>;
- #address-cells = <1>;
- #size-cells = <0>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0x7>;
@@ -204,7 +202,7 @@
status = "disabled";
};
- pxa3xx_ohci: usb@4c000000 {
+ usb0: usb@4c000000 {
compatible = "marvell,pxa-ohci";
reg = <0x4c000000 0x10000>;
interrupts = <3>;
@@ -275,6 +273,22 @@
clocks = <&clks CLK_SSP4>;
status = "disabled";
};
+
+ timer@40a00000 {
+ compatible = "marvell,pxa-timer";
+ reg = <0x40a00000 0x20>;
+ interrupts = <26>;
+ clocks = <&clks CLK_OSTIMER>;
+ status = "okay";
+ };
+
+ gcu: display-controller@54000000 {
+ compatible = "marvell,pxa300-gcu";
+ reg = <0x54000000 0x1000>;
+ interrupts = <39>;
+ clocks = <&clks CLK_PXA300_GCU>;
+ status = "disabled";
+ };
};
clocks {
@@ -286,18 +300,10 @@
#size-cells = <1>;
ranges;
- clks: pxa3xx_clks@41300004 {
+ clks: clocks {
compatible = "marvell,pxa300-clocks";
#clock-cells = <1>;
status = "okay";
};
};
-
- timer@40a00000 {
- compatible = "marvell,pxa-timer";
- reg = <0x40a00000 0x20>;
- interrupts = <26>;
- clocks = <&clks CLK_OSTIMER>;
- status = "okay";
- };
};
diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi
deleted file mode 100644
index 8df7315..0000000
--- a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi
+++ /dev/null
@@ -1,53 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-&tlmm_pinmux {
- card_detect: card-detect {
- mux {
- pins = "gpio26";
- function = "gpio";
- bias-disable;
- };
- };
-
- pcie_pins: pcie-pinmux {
- mux {
- pins = "gpio27";
- function = "gpio";
- };
- conf {
- pins = "gpio27";
- drive-strength = <12>;
- bias-disable;
- };
- };
-
- user_leds: user-leds {
- mux {
- pins = "gpio3", "gpio7", "gpio10", "gpio11";
- function = "gpio";
- };
-
- conf {
- pins = "gpio3", "gpio7", "gpio10", "gpio11";
- function = "gpio";
- output-low;
- };
- };
-
- magneto_pins: magneto-pins {
- mux {
- pins = "gpio31", "gpio48";
- function = "gpio";
- bias-disable;
- };
- };
-};
-
-&pm8921_mpps {
- mpp_leds: mpp-leds {
- pinconf {
- pins = "mpp7", "mpp8";
- function = "digital";
- output-low;
- };
- };
-};
diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
deleted file mode 100644
index 76b56ea..0000000
--- a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
+++ /dev/null
@@ -1,415 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
-#include "qcom-apq8064-arrow-sd-600eval-pins.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/mfd/qcom-rpm.h>
-
-/ {
- model = "Arrow Electronics, APQ8064 SD_600eval";
- compatible = "arrow,sd_600eval", "qcom,apq8064";
-
- aliases {
- serial0 = &gsbi7_serial;
- serial1 = &gsbi1_serial;
- i2c0 = &gsbi2_i2c;
- i2c1 = &gsbi3_i2c;
- i2c2 = &gsbi4_i2c;
- i2c3 = &gsbi7_i2c;
- spi0 = &gsbi5_spi;
- };
-
- regulators {
- compatible = "simple-bus";
- vph: regulator-fixed@1 {
- compatible = "regulator-fixed";
- regulator-min-microvolt = <4500000>;
- regulator-max-microvolt = <4500000>;
- regulator-name = "VPH";
- regulator-type = "voltage";
- regulator-boot-on;
- };
-
- /* on board fixed 3.3v supply */
- vcc3v3: vcc3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- };
-
- hdmi-out {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con: endpoint {
- remote-endpoint = <&hdmi_out>;
- };
- };
- };
-
- soc {
- rpm@108000 {
- regulators {
- vdd_s1-supply = <&vph>;
- vdd_s2-supply = <&vph>;
- vdd_s3-supply = <&vph>;
- vdd_s4-supply = <&vph>;
- vdd_s5-supply = <&vph>;
- vdd_s6-supply = <&vph>;
- vdd_s7-supply = <&vph>;
- vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
- vdd_l3_l15_l17-supply = <&vph>;
- vdd_l4_l14-supply = <&vph>;
- vdd_l5_l8_l16-supply = <&vph>;
- vdd_l6_l7-supply = <&vph>;
- vdd_l9_l11-supply = <&vph>;
- vdd_l10_l22-supply = <&vph>;
- vdd_l21_l23_l29-supply = <&vph>;
- vdd_l24-supply = <&pm8921_s1>;
- vdd_l25-supply = <&pm8921_s1>;
- vdd_l26-supply = <&pm8921_s7>;
- vdd_l27-supply = <&pm8921_s7>;
- vdd_l28-supply = <&pm8921_s7>;
- vin_lvs1_3_6-supply = <&pm8921_s4>;
- vin_lvs2-supply = <&pm8921_s1>;
- vin_lvs4_5_7-supply = <&pm8921_s4>;
-
- s1 {
- regulator-always-on;
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- qcom,switch-mode-frequency = <3200000>;
- bias-pull-down;
- };
-
- s2 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- qcom,switch-mode-frequency = <1600000>;
- bias-pull-down;
- regulator-always-on;
- };
-
- s3 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- qcom,switch-mode-frequency = <4800000>;
- };
-
- s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,switch-mode-frequency = <1600000>;
- qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
- bias-pull-down;
- regulator-always-on;
- };
-
- s7 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- qcom,switch-mode-frequency = <3200000>;
- };
-
- l3 {
- regulator-min-microvolt = <3050000>;
- regulator-max-microvolt = <3300000>;
- bias-pull-down;
- };
-
- l4 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1800000>;
- bias-pull-down;
- };
-
- l5 {
- regulator-min-microvolt = <2750000>;
- regulator-max-microvolt = <3000000>;
- bias-pull-down;
- regulator-boot-on;
- regulator-always-on;
- };
-
- l6 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- bias-pull-down;
- };
-
- /**
- * 1.8v required on LS expansion
- * for mezzanine boards
- */
- l15 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- l23 {
- regulator-min-microvolt = <1700000>;
- regulator-max-microvolt = <1900000>;
- bias-pull-down;
- };
-
- lvs6 {
- bias-pull-down;
- };
-
- lvs7 {
- bias-pull-down;
- };
- };
- };
-
- gsbi@12440000 {
- status = "okay";
- qcom,mode = <GSBI_PROT_UART_W_FC>;
- serial@12450000 {
- label = "LS-UART1";
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&gsbi1_uart_4pins>;
- };
- };
-
- gsbi@12480000 {
- status = "okay";
- qcom,mode = <GSBI_PROT_I2C>;
- i2c@124a0000 {
- /* On Low speed expansion and Sensors */
- label = "LS-I2C0";
- status = "okay";
- lis3mdl_mag@1e {
- compatible = "st,lis3mdl-magn";
- reg = <0x1e>;
- vdd-supply = <&vcc3v3>;
- vddio-supply = <&pm8921_s4>;
- pinctrl-names = "default";
- pinctrl-0 = <&magneto_pins>;
- interrupt-parent = <&tlmm_pinmux>;
-
- st,drdy-int-pin = <2>;
- interrupts = <48 IRQ_TYPE_EDGE_RISING>, /* DRDY line */
- <31 IRQ_TYPE_EDGE_RISING>; /* INT */
- };
- };
- };
-
- gsbi@16200000 {
- status = "okay";
- qcom,mode = <GSBI_PROT_I2C>;
- i2c@16280000 {
- /* On Low speed expansion */
- status = "okay";
- label = "LS-I2C1";
- clock-frequency = <200000>;
- eeprom@52 {
- compatible = "atmel,24c128";
- reg = <0x52>;
- pagesize = <64>;
- };
- };
- };
-
- gsbi@16300000 {
- status = "okay";
- qcom,mode = <GSBI_PROT_I2C>;
- i2c@16380000 {
- /* On High speed expansion */
- label = "HS-CAM-I2C3";
- status = "okay";
- };
- };
-
- gsbi@1a200000 {
- status = "okay";
- spi@1a280000 {
- /* On Low speed expansion */
- label = "LS-SPI0";
- status = "okay";
- };
- };
-
- /* DEBUG UART */
- gsbi@16600000 {
- status = "okay";
- qcom,mode = <GSBI_PROT_I2C_UART>;
- serial@16640000 {
- label = "LS-UART0";
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&gsbi7_uart_2pins>;
- };
-
- i2c@16680000 {
- /* On High speed expansion */
- status = "okay";
- label = "HS-CAM-I2C2";
- };
- };
-
- leds {
- pinctrl-names = "default";
- pinctrl-0 = <&user_leds>, <&mpp_leds>;
-
- compatible = "gpio-leds";
-
- user-led0 {
- label = "user0-led";
- gpios = <&tlmm_pinmux 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- default-state = "off";
- };
-
- user-led1 {
- label = "user1-led";
- gpios = <&tlmm_pinmux 7 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "mmc0";
- default-state = "off";
- };
-
- user-led2 {
- label = "user2-led";
- gpios = <&tlmm_pinmux 10 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "mmc1";
- default-state = "off";
- };
-
- user-led3 {
- label = "user3-led";
- gpios = <&tlmm_pinmux 11 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "none";
- default-state = "off";
- };
-
- wifi-led {
- label = "WiFi-led";
- gpios = <&pm8921_mpps 7 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- bt-led {
- label = "BT-led";
- gpios = <&pm8921_mpps 8 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
-
- pci@1b500000 {
- status = "okay";
- vdda-supply = <&pm8921_s3>;
- vdda_phy-supply = <&pm8921_lvs6>;
- vdda_refclk-supply = <&vcc3v3>;
- pinctrl-0 = <&pcie_pins>;
- pinctrl-names = "default";
- perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
- };
-
- phy@1b400000 {
- status = "okay";
- };
-
- sata@29000000 {
- status = "okay";
- target-supply = <&pm8921_lvs7>;
- };
-
- /* OTG */
- usb@12500000 {
- status = "okay";
- dr_mode = "peripheral";
- ulpi {
- phy {
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l4>;
- };
- };
- };
-
- usb@12520000 {
- status = "okay";
- dr_mode = "otg";
- ulpi {
- phy {
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l23>;
- };
- };
- };
-
- usb@12530000 {
- status = "okay";
- dr_mode = "otg";
- ulpi {
- phy {
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l23>;
- };
- };
- };
-
- amba {
- /* eMMC */
- sdcc@12400000 {
- status = "okay";
- vmmc-supply = <&pm8921_l5>;
- vqmmc-supply = <&pm8921_s4>;
- };
-
- /* External micro SD card */
- sdcc@12180000 {
- status = "okay";
- vmmc-supply = <&pm8921_l6>;
- pinctrl-names = "default";
- pinctrl-0 = <&card_detect>;
- cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>;
- };
- };
-
- riva-pil@3204000 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
- };
-
- hdmi-tx@4a00000 {
- status = "okay";
- core-vdda-supply = <&pm8921_hdmi_switch>;
- hdmi-mux-supply = <&vcc3v3>;
-
- hpd-gpio = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
-
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <&hdmi_con>;
- };
- };
- };
- };
-
- hdmi-phy@4a00400 {
- status = "okay";
- core-vdda-supply = <&pm8921_hdmi_switch>;
- };
-
- mdp@5100000 {
- status = "okay";
-
- ports {
- port@3 {
- endpoint {
- remote-endpoint = <&hdmi_in>;
- };
- };
- };
- };
- };
-};
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 0e1e987..899f285 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -412,7 +412,7 @@
};
sdhci@f9824900 {
- compatible = "qcom,sdhci-msm-v4";
+ compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <0 123 0>, <0 138 0>;
@@ -425,7 +425,7 @@
};
sdhci@f98a4900 {
- compatible = "qcom,sdhci-msm-v4";
+ compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <0 125 0>, <0 221 0>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index ed8f064..51444c5 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -327,8 +327,7 @@
ak8963@f {
compatible = "asahi-kasei,ak8963";
reg = <0x0f>;
- // Currently only works in polling mode.
- // gpios = <&msmgpio 61 0>;
+ gpios = <&msmgpio 67 0>;
vid-supply = <&pm8941_lvs1>;
vdd-supply = <&pm8941_l17>;
};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index aba159d..ca266a5 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -427,11 +427,13 @@
};
};
- tsens: thermal-sensor@fc4a8000 {
+ tsens: thermal-sensor@fc4a9000 {
compatible = "qcom,msm8974-tsens";
- reg = <0xfc4a8000 0x2000>;
+ reg = <0xfc4a9000 0x1000>, /* TM */
+ <0xfc4a8000 0x1000>; /* SROT */
nvmem-cells = <&tsens_calib>, <&tsens_backup>;
nvmem-cell-names = "calib", "calib_backup";
+ #qcom,sensors = <11>;
#thermal-sensor-cells = <1>;
};
@@ -602,7 +604,7 @@
};
sdhci@f9824900 {
- compatible = "qcom,sdhci-msm-v4";
+ compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
@@ -616,7 +618,7 @@
};
sdhci@f9864900 {
- compatible = "qcom,sdhci-msm-v4";
+ compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
@@ -630,7 +632,7 @@
};
sdhci@f98a4900 {
- compatible = "qcom,sdhci-msm-v4";
+ compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 383cba6..12ffe73 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7740 SoC
+ * Device Tree Source for the R-Mobile A1 (R8A77400) SoC
*
* Copyright (C) 2012 Renesas Solutions Corp.
*/
diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
index 0e2e033..b3fee1d 100644
--- a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
+++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
@@ -31,10 +31,6 @@
};
};
-&cmt0 {
- status = "okay";
-};
-
&extal_clk {
clock-frequency = <20000000>;
};
@@ -88,11 +84,6 @@
};
};
-&rwdt {
- timeout-sec = <60>;
- status = "okay";
-};
-
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 24715f7..3cc33f7 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -348,8 +348,7 @@
thermal: thermal@e61f0000 {
compatible = "renesas,thermal-r8a7743",
- "renesas,rcar-gen2-thermal",
- "renesas,rcar-thermal";
+ "renesas,rcar-gen2-thermal";
reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 522>;
diff --git a/arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts
new file mode 100644
index 0000000..3e58c2e9
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave Systems RZ/G1N Qseven board development
+ * platform with camera daughter board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a7744-iwg20m.dtsi"
+#include "iwg20d-q7-common.dtsi"
+#include "iwg20d-q7-dbcm-ca.dtsi"
+
+/ {
+ model = "iWave Systems RZ/G1N Qseven development platform with camera add-on";
+ compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7744";
+};
diff --git a/arch/arm/boot/dts/r8a7744-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7744-iwg20d-q7.dts
new file mode 100644
index 0000000..1fdac52
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7744-iwg20d-q7.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave-RZ/G1N Qseven board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a7744-iwg20m.dtsi"
+#include "iwg20d-q7-common.dtsi"
+
+/ {
+ model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1N";
+ compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7744";
+};
diff --git a/arch/arm/boot/dts/r8a7744-iwg20m.dtsi b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
new file mode 100644
index 0000000..82ee3c1
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave RZ/G1N Qseven SOM
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+#include "r8a7744.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "iwave,g20m", "renesas,r8a7744";
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x40000000>;
+ };
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <20000000>;
+};
+
+&pfc {
+ mmcif0_pins: mmc {
+ groups = "mmc_data8_b", "mmc_ctrl";
+ function = "mmc";
+ };
+
+ qspi_pins: qspi {
+ groups = "qspi_ctrl", "qspi_data2";
+ function = "qspi";
+ };
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+};
+
+&mmcif0 {
+ pinctrl-0 = <&mmcif0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <®_3p3v>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&qspi {
+ pinctrl-0 = <&qspi_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ /* WARNING - This device contains the bootloader. Handle with care. */
+ flash: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
+ m25p,fast-read;
+ spi-cpol;
+ spi-cpha;
+ };
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_3p3v>;
+ cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
new file mode 100644
index 0000000..04148d6
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -0,0 +1,1741 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a7744 SoC
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a7744-cpg-mssr.h>
+#include <dt-bindings/power/r8a7744-sysc.h>
+
+/ {
+ compatible = "renesas,r8a7744";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency
+ * clocks by default.
+ * Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ /* External CAN clock */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "renesas,apmu";
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+ clock-frequency = <1500000000>;
+ clocks = <&cpg CPG_CORE R8A7744_CLK_Z>;
+ clock-latency = <300000>; /* 300 us */
+ power-domains = <&sysc R8A7744_PD_CA15_CPU0>;
+ next-level-cache = <&L2_CA15>;
+
+ /* kHz - uV - OPPs unknown yet */
+ operating-points = <1500000 1000000>,
+ <1312500 1000000>,
+ <1125000 1000000>,
+ < 937500 1000000>,
+ < 750000 1000000>,
+ < 375000 1000000>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <1>;
+ clock-frequency = <1500000000>;
+ clocks = <&cpg CPG_CORE R8A7744_CLK_Z>;
+ clock-latency = <300000>; /* 300 us */
+ power-domains = <&sysc R8A7744_PD_CA15_CPU1>;
+ next-level-cache = <&L2_CA15>;
+
+ /* kHz - uV - OPPs unknown yet */
+ operating-points = <1500000 1000000>,
+ <1312500 1000000>,
+ <1125000 1000000>,
+ < 937500 1000000>,
+ < 750000 1000000>,
+ < 375000 1000000>;
+ };
+
+ L2_CA15: cache-controller-0 {
+ compatible = "cache";
+ cache-unified;
+ cache-level = <2>;
+ power-domains = <&sysc R8A7744_PD_CA15_SCU>;
+ };
+ };
+
+ /* External root clock */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a15-pmu";
+ interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ };
+
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ rwdt: watchdog@e6020000 {
+ compatible = "renesas,r8a7744-wdt",
+ "renesas,rcar-gen2-wdt";
+ reg = <0 0xe6020000 0 0x0c>;
+ clocks = <&cpg CPG_MOD 402>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 402>;
+ status = "disabled";
+ };
+
+ gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a7744",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 912>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
+ };
+
+ gpio1: gpio@e6051000 {
+ compatible = "renesas,gpio-r8a7744",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6051000 0 0x50>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 911>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
+ };
+
+ gpio2: gpio@e6052000 {
+ compatible = "renesas,gpio-r8a7744",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6052000 0 0x50>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 910>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
+ };
+
+ gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a7744",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6053000 0 0x50>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 909>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
+ };
+
+ gpio4: gpio@e6054000 {
+ compatible = "renesas,gpio-r8a7744",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6054000 0 0x50>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 908>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 908>;
+ };
+
+ gpio5: gpio@e6055000 {
+ compatible = "renesas,gpio-r8a7744",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6055000 0 0x50>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 907>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
+ };
+
+ gpio6: gpio@e6055400 {
+ compatible = "renesas,gpio-r8a7744",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6055400 0 0x50>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 905>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 905>;
+ };
+
+ gpio7: gpio@e6055800 {
+ compatible = "renesas,gpio-r8a7744",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6055800 0 0x50>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 224 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 904>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 904>;
+ };
+
+ pfc: pin-controller@e6060000 {
+ compatible = "renesas,pfc-r8a7744";
+ reg = <0 0xe6060000 0 0x250>;
+ };
+
+ tpu: pwm@e60f0000 {
+ compatible = "renesas,tpu-r8a7744", "renesas,tpu";
+ reg = <0 0xe60f0000 0 0x148>;
+ clocks = <&cpg CPG_MOD 304>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 304>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a7744-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>, <&usb_extal_clk>;
+ clock-names = "extal", "usb_extal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ #reset-cells = <1>;
+ };
+
+ apmu@e6152000 {
+ compatible = "renesas,r8a7744-apmu", "renesas,apmu";
+ reg = <0 0xe6152000 0 0x188>;
+ cpus = <&cpu0 &cpu1>;
+ };
+
+ rst: reset-controller@e6160000 {
+ compatible = "renesas,r8a7744-rst";
+ reg = <0 0xe6160000 0 0x100>;
+ };
+
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a7744-sysc";
+ reg = <0 0xe6180000 0 0x200>;
+ #power-domain-cells = <1>;
+ };
+
+ irqc: interrupt-controller@e61c0000 {
+ compatible = "renesas,irqc-r8a7744", "renesas,irqc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0 0xe61c0000 0 0x200>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 407>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 407>;
+ };
+
+ thermal: thermal@e61f0000 {
+ compatible = "renesas,thermal-r8a7744",
+ "renesas,rcar-gen2-thermal";
+ reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ ipmmu_sy0: mmu@e6280000 {
+ compatible = "renesas,ipmmu-r8a7744",
+ "renesas,ipmmu-vmsa";
+ reg = <0 0xe6280000 0 0x1000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
+
+ ipmmu_sy1: mmu@e6290000 {
+ compatible = "renesas,ipmmu-r8a7744",
+ "renesas,ipmmu-vmsa";
+ reg = <0 0xe6290000 0 0x1000>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
+
+ ipmmu_ds: mmu@e6740000 {
+ compatible = "renesas,ipmmu-r8a7744",
+ "renesas,ipmmu-vmsa";
+ reg = <0 0xe6740000 0 0x1000>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
+
+ ipmmu_mp: mmu@ec680000 {
+ compatible = "renesas,ipmmu-r8a7744",
+ "renesas,ipmmu-vmsa";
+ reg = <0 0xec680000 0 0x1000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
+
+ ipmmu_mx: mmu@fe951000 {
+ compatible = "renesas,ipmmu-r8a7744",
+ "renesas,ipmmu-vmsa";
+ reg = <0 0xfe951000 0 0x1000>;
+ interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
+
+ ipmmu_gp: mmu@e62a0000 {
+ compatible = "renesas,ipmmu-r8a7744",
+ "renesas,ipmmu-vmsa";
+ reg = <0 0xe62a0000 0 0x1000>;
+ interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
+
+ icram0: sram@e63a0000 {
+ compatible = "mmio-sram";
+ reg = <0 0xe63a0000 0 0x12000>;
+ };
+
+ icram1: sram@e63c0000 {
+ compatible = "mmio-sram";
+ reg = <0 0xe63c0000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xe63c0000 0x1000>;
+
+ smp-sram@0 {
+ compatible = "renesas,smp-sram";
+ reg = <0 0x100>;
+ };
+ };
+
+ icram2: sram@e6300000 {
+ compatible = "mmio-sram";
+ reg = <0 0xe6300000 0 0x40000>;
+ };
+
+ /* The memory map in the User's Manual maps the cores to
+ * bus numbers
+ */
+ i2c0: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7744",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6518000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7744",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6518000 0 0x40>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 930>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6530000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7744",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6530000 0 0x40>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 929>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e6540000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7744",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6540000 0 0x40>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 928>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e6520000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7744",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6520000 0 0x40>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 927>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e6528000 {
+ /* doesn't need pinmux */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7744",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6528000 0 0x40>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 925>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 925>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ iic0: i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7744",
+ "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
+ reg = <0 0xe6500000 0 0x425>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 318>;
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+ <&dmac1 0x61>, <&dmac1 0x62>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 318>;
+ status = "disabled";
+ };
+
+ iic1: i2c@e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7744",
+ "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
+ reg = <0 0xe6510000 0 0x425>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 323>;
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+ <&dmac1 0x65>, <&dmac1 0x66>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 323>;
+ status = "disabled";
+ };
+
+ iic3: i2c@e60b0000 {
+ /* doesn't need pinmux */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7744";
+ reg = <0 0xe60b0000 0 0x425>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 926>;
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+ <&dmac1 0x77>, <&dmac1 0x78>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 926>;
+ status = "disabled";
+ };
+
+ hsusb: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a7744",
+ "renesas,rcar-gen2-usbhs";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 704>;
+ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+ <&usb_dmac1 0>, <&usb_dmac1 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
+ renesas,buswait = <4>;
+ phys = <&usb0 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usbphy: usb-phy@e6590100 {
+ compatible = "renesas,usb-phy-r8a7744",
+ "renesas,rcar-gen2-usb-phy";
+ reg = <0 0xe6590100 0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cpg CPG_MOD 704>;
+ clock-names = "usbhs";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
+ status = "disabled";
+
+ usb0: usb-channel@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+ usb2: usb-channel@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+ };
+
+ usb_dmac0: dma-controller@e65a0000 {
+ compatible = "renesas,r8a7744-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65a0000 0 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 330>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 330>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb_dmac1: dma-controller@e65b0000 {
+ compatible = "renesas,r8a7744-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65b0000 0 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 331>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 331>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,dmac-r8a7744",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x20000>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&cpg CPG_MOD 219>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 219>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ dmac1: dma-controller@e6720000 {
+ compatible = "renesas,dmac-r8a7744",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6720000 0 0x20000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&cpg CPG_MOD 218>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 218>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ avb: ethernet@e6800000 {
+ compatible = "renesas,etheravb-r8a7744",
+ "renesas,etheravb-rcar-gen2";
+ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 812>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 812>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ qspi: spi@e6b10000 {
+ compatible = "renesas,qspi-r8a7744", "renesas,qspi";
+ reg = <0 0xe6b10000 0 0x2c>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+ <&dmac1 0x17>, <&dmac1 0x18>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&cpg 917>;
+ status = "disabled";
+ };
+
+ scifa0: serial@e6c40000 {
+ compatible = "renesas,scifa-r8a7744",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c40000 0 0x40>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 204>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+ <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 204>;
+ status = "disabled";
+ };
+
+ scifa1: serial@e6c50000 {
+ compatible = "renesas,scifa-r8a7744",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c50000 0 0x40>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 203>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+ <&dmac1 0x25>, <&dmac1 0x26>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 203>;
+ status = "disabled";
+ };
+
+ scifa2: serial@e6c60000 {
+ compatible = "renesas,scifa-r8a7744",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c60000 0 0x40>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 202>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+ <&dmac1 0x27>, <&dmac1 0x28>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 202>;
+ status = "disabled";
+ };
+
+ scifa3: serial@e6c70000 {
+ compatible = "renesas,scifa-r8a7744",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c70000 0 0x40>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1106>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+ <&dmac1 0x1b>, <&dmac1 0x1c>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 1106>;
+ status = "disabled";
+ };
+
+ scifa4: serial@e6c78000 {
+ compatible = "renesas,scifa-r8a7744",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c78000 0 0x40>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1107>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+ <&dmac1 0x1f>, <&dmac1 0x20>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 1107>;
+ status = "disabled";
+ };
+
+ scifa5: serial@e6c80000 {
+ compatible = "renesas,scifa-r8a7744",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c80000 0 0x40>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1108>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+ <&dmac1 0x23>, <&dmac1 0x24>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 1108>;
+ status = "disabled";
+ };
+
+ scifb0: serial@e6c20000 {
+ compatible = "renesas,scifb-r8a7744",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
+ reg = <0 0xe6c20000 0 0x100>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 206>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+ <&dmac1 0x3d>, <&dmac1 0x3e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 206>;
+ status = "disabled";
+ };
+
+ scifb1: serial@e6c30000 {
+ compatible = "renesas,scifb-r8a7744",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
+ reg = <0 0xe6c30000 0 0x100>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 207>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+ <&dmac1 0x19>, <&dmac1 0x1a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 207>;
+ status = "disabled";
+ };
+
+ scifb2: serial@e6ce0000 {
+ compatible = "renesas,scifb-r8a7744",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
+ reg = <0 0xe6ce0000 0 0x100>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 216>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+ <&dmac1 0x1d>, <&dmac1 0x1e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 216>;
+ status = "disabled";
+ };
+
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a7744",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6e60000 0 0x40>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 721>,
+ <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 721>;
+ status = "disabled";
+ };
+
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a7744",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6e68000 0 0x40>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 720>,
+ <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 720>;
+ status = "disabled";
+ };
+
+ scif2: serial@e6e58000 {
+ compatible = "renesas,scif-r8a7744",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6e58000 0 0x40>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 719>,
+ <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 719>;
+ status = "disabled";
+ };
+
+ scif3: serial@e6ea8000 {
+ compatible = "renesas,scif-r8a7744",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6ea8000 0 0x40>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 718>,
+ <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+ <&dmac1 0x2f>, <&dmac1 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 718>;
+ status = "disabled";
+ };
+
+ scif4: serial@e6ee0000 {
+ compatible = "renesas,scif-r8a7744",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6ee0000 0 0x40>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 715>,
+ <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+ <&dmac1 0xfb>, <&dmac1 0xfc>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 715>;
+ status = "disabled";
+ };
+
+ scif5: serial@e6ee8000 {
+ compatible = "renesas,scif-r8a7744",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6ee8000 0 0x40>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 714>,
+ <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+ <&dmac1 0xfd>, <&dmac1 0xfe>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 714>;
+ status = "disabled";
+ };
+
+ hscif0: serial@e62c0000 {
+ compatible = "renesas,hscif-r8a7744",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62c0000 0 0x60>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 717>,
+ <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 717>;
+ status = "disabled";
+ };
+
+ hscif1: serial@e62c8000 {
+ compatible = "renesas,hscif-r8a7744",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62c8000 0 0x60>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 716>,
+ <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
+ status = "disabled";
+ };
+
+ hscif2: serial@e62d0000 {
+ compatible = "renesas,hscif-r8a7744",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62d0000 0 0x60>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 713>,
+ <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+ <&dmac1 0x3b>, <&dmac1 0x3c>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 713>;
+ status = "disabled";
+ };
+
+ pwm0: pwm@e6e30000 {
+ compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@e6e31000 {
+ compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@e6e32000 {
+ compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@e6e33000 {
+ compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@e6e34000 {
+ compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@e6e35000 {
+ compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar";
+ reg = <0 0xe6e35000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@e6e36000 {
+ compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar";
+ reg = <0 0xe6e36000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ msiof0: spi@e6e20000 {
+ compatible = "renesas,msiof-r8a7744",
+ "renesas,rcar-gen2-msiof";
+ reg = <0 0xe6e20000 0 0x0064>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 000>;
+ dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+ <&dmac1 0x51>, <&dmac1 0x52>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&cpg 000>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6e10000 {
+ compatible = "renesas,msiof-r8a7744",
+ "renesas,rcar-gen2-msiof";
+ reg = <0 0xe6e10000 0 0x0064>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 208>;
+ dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+ <&dmac1 0x55>, <&dmac1 0x56>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&cpg 208>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6e00000 {
+ compatible = "renesas,msiof-r8a7744",
+ "renesas,rcar-gen2-msiof";
+ reg = <0 0xe6e00000 0 0x0064>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 205>;
+ dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+ <&dmac1 0x41>, <&dmac1 0x42>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&cpg 205>;
+ status = "disabled";
+ };
+
+ can0: can@e6e80000 {
+ compatible = "renesas,can-r8a7744",
+ "renesas,rcar-gen2-can";
+ reg = <0 0xe6e80000 0 0x1000>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 916>,
+ <&cpg CPG_CORE R8A7744_CLK_RCAN>,
+ <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
+ status = "disabled";
+ };
+
+ can1: can@e6e88000 {
+ compatible = "renesas,can-r8a7744",
+ "renesas,rcar-gen2-can";
+ reg = <0 0xe6e88000 0 0x1000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 915>,
+ <&cpg CPG_CORE R8A7744_CLK_RCAN>,
+ <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
+ status = "disabled";
+ };
+
+ vin0: video@e6ef0000 {
+ compatible = "renesas,vin-r8a7744",
+ "renesas,rcar-gen2-vin";
+ reg = <0 0xe6ef0000 0 0x1000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 811>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 811>;
+ status = "disabled";
+ };
+
+ vin1: video@e6ef1000 {
+ compatible = "renesas,vin-r8a7744",
+ "renesas,rcar-gen2-vin";
+ reg = <0 0xe6ef1000 0 0x1000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 810>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 810>;
+ status = "disabled";
+ };
+
+ vin2: video@e6ef2000 {
+ compatible = "renesas,vin-r8a7744",
+ "renesas,rcar-gen2-vin";
+ reg = <0 0xe6ef2000 0 0x1000>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 809>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 809>;
+ status = "disabled";
+ };
+
+ rcar_sound: sound@ec500000 {
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
+ compatible = "renesas,rcar_sound-r8a7744",
+ "renesas,rcar_sound-gen2";
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+ <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
+ <&cpg CPG_CORE R8A7744_CLK_M2>;
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+ "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
+ "src.9", "src.8", "src.7", "src.6", "src.5",
+ "src.4", "src.3", "src.2", "src.1", "src.0",
+ "ctu.0", "ctu.1",
+ "mix.0", "mix.1",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b", "clk_c", "clk_i";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 1005>,
+ <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>,
+ <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>,
+ <&cpg 1014>, <&cpg 1015>;
+ reset-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+ "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0";
+ status = "disabled";
+
+ rcar_sound,dvc {
+ dvc0: dvc-0 {
+ dmas = <&audma1 0xbc>;
+ dma-names = "tx";
+ };
+ dvc1: dvc-1 {
+ dmas = <&audma1 0xbe>;
+ dma-names = "tx";
+ };
+ };
+
+ rcar_sound,mix {
+ mix0: mix-0 { };
+ mix1: mix-1 { };
+ };
+
+ rcar_sound,ctu {
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
+ };
+
+ rcar_sound,src {
+ src0: src-0 {
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x85>, <&audma1 0x9a>;
+ dma-names = "rx", "tx";
+ };
+ src1: src-1 {
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x87>, <&audma1 0x9c>;
+ dma-names = "rx", "tx";
+ };
+ src2: src-2 {
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x89>, <&audma1 0x9e>;
+ dma-names = "rx", "tx";
+ };
+ src3: src-3 {
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+ dma-names = "rx", "tx";
+ };
+ src4: src-4 {
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+ dma-names = "rx", "tx";
+ };
+ src5: src-5 {
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+ dma-names = "rx", "tx";
+ };
+ src6: src-6 {
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x91>, <&audma1 0xb4>;
+ dma-names = "rx", "tx";
+ };
+ src7: src-7 {
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x93>, <&audma1 0xb6>;
+ dma-names = "rx", "tx";
+ };
+ src8: src-8 {
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x95>, <&audma1 0xb8>;
+ dma-names = "rx", "tx";
+ };
+ src9: src-9 {
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x97>, <&audma1 0xba>;
+ dma-names = "rx", "tx";
+ };
+ };
+
+ rcar_sound,ssi {
+ ssi0: ssi-0 {
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi1: ssi-1 {
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi2: ssi-2 {
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi3: ssi-3 {
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi4: ssi-4 {
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi5: ssi-5 {
+ interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi6: ssi-6 {
+ interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi7: ssi-7 {
+ interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi8: ssi-8 {
+ interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi9: ssi-9 {
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ };
+ };
+
+ audma0: dma-controller@ec700000 {
+ compatible = "renesas,dmac-r8a7744",
+ "renesas,rcar-dmac";
+ reg = <0 0xec700000 0 0x10000>;
+ interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12";
+ clocks = <&cpg CPG_MOD 502>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 502>;
+ #dma-cells = <1>;
+ dma-channels = <13>;
+ };
+
+ audma1: dma-controller@ec720000 {
+ compatible = "renesas,dmac-r8a7744",
+ "renesas,rcar-dmac";
+ reg = <0 0xec720000 0 0x10000>;
+ interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12";
+ clocks = <&cpg CPG_MOD 501>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 501>;
+ #dma-cells = <1>;
+ dma-channels = <13>;
+ };
+
+ /*
+ * pci1 and xhci share the same phy, therefore only one of them
+ * can be active at any one time. If both of them are enabled,
+ * a race condition will determine who'll control the phy.
+ * A firmware file is needed by the xhci driver in order for
+ * USB 3.0 to work properly.
+ */
+ xhci: usb@ee000000 {
+ compatible = "renesas,xhci-r8a7744",
+ "renesas,rcar-gen2-xhci";
+ reg = <0 0xee000000 0 0xc00>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 328>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 328>;
+ phys = <&usb2 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ pci0: pci@ee090000 {
+ compatible = "renesas,pci-r8a7744",
+ "renesas,pci-rcar-gen2";
+ device_type = "pci";
+ reg = <0 0xee090000 0 0xc00>,
+ <0 0xee080000 0 0x1100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ status = "disabled";
+
+ bus-range = <0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@1,0 {
+ reg = <0x800 0 0 0 0>;
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
+
+ usb@2,0 {
+ reg = <0x1000 0 0 0 0>;
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
+ };
+
+ pci1: pci@ee0d0000 {
+ compatible = "renesas,pci-r8a7744",
+ "renesas,pci-rcar-gen2";
+ device_type = "pci";
+ reg = <0 0xee0d0000 0 0xc00>,
+ <0 0xee0c0000 0 0x1100>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ status = "disabled";
+
+ bus-range = <1 1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@1,0 {
+ reg = <0x10800 0 0 0 0>;
+ phys = <&usb2 0>;
+ phy-names = "usb";
+ };
+
+ usb@2,0 {
+ reg = <0x11000 0 0 0 0>;
+ phys = <&usb2 0>;
+ phy-names = "usb";
+ };
+ };
+
+ sdhi0: sd@ee100000 {
+ compatible = "renesas,sdhi-r8a7744",
+ "renesas,rcar-gen2-sdhi";
+ reg = <0 0xee100000 0 0x328>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 314>;
+ dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+ <&dmac1 0xcd>, <&dmac1 0xce>;
+ dma-names = "tx", "rx", "tx", "rx";
+ max-frequency = <195000000>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
+ status = "disabled";
+ };
+
+ sdhi1: sd@ee140000 {
+ compatible = "renesas,sdhi-r8a7744",
+ "renesas,rcar-gen2-sdhi";
+ reg = <0 0xee140000 0 0x100>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 312>;
+ dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+ <&dmac1 0xc1>, <&dmac1 0xc2>;
+ dma-names = "tx", "rx", "tx", "rx";
+ max-frequency = <97500000>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 312>;
+ status = "disabled";
+ };
+
+ sdhi2: sd@ee160000 {
+ compatible = "renesas,sdhi-r8a7744",
+ "renesas,rcar-gen2-sdhi";
+ reg = <0 0xee160000 0 0x100>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 311>;
+ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+ <&dmac1 0xd3>, <&dmac1 0xd4>;
+ dma-names = "tx", "rx", "tx", "rx";
+ max-frequency = <97500000>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 311>;
+ status = "disabled";
+ };
+
+ mmcif0: mmc@ee200000 {
+ compatible = "renesas,mmcif-r8a7744",
+ "renesas,sh-mmcif";
+ reg = <0 0xee200000 0 0x80>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 315>;
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+ <&dmac1 0xd1>, <&dmac1 0xd2>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 315>;
+ reg-io-width = <4>;
+ max-frequency = <97500000>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@f1001000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>,
+ <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&cpg CPG_MOD 408>;
+ clock-names = "clk";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 408>;
+ };
+
+ vsp@fe928000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe928000 0 0x8000>;
+ interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 131>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 131>;
+ };
+
+ vsp@fe930000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe930000 0 0x8000>;
+ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 128>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 128>;
+ };
+
+ vsp@fe938000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe938000 0 0x8000>;
+ interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 127>;
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 127>;
+ };
+
+ pciec: pcie@fe000000 {
+ compatible = "renesas,pcie-r8a7744",
+ "renesas,pcie-rcar-gen2";
+ reg = <0 0xfe000000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+ 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+ 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+ 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ /* Map all possible DDR as inbound ranges */
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
+ 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+ clock-names = "pcie", "pcie_bus";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 319>;
+ status = "disabled";
+ };
+
+ du: display@feb00000 {
+ reg = <0 0xfeb00000 0 0x40000>,
+ <0 0xfeb90000 0 0x1c>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb: endpoint {
+ };
+ };
+ port@1 {
+ reg = <1>;
+ du_out_lvds0: endpoint {
+ };
+ };
+ };
+ /* placeholder */
+ };
+
+ prr: chipid@ff000044 {
+ compatible = "renesas,prr";
+ reg = <0 0xff000044 0 4>;
+ };
+
+ cmt0: timer@ffca0000 {
+ compatible = "renesas,r8a7744-cmt0",
+ "renesas,rcar-gen2-cmt0";
+ reg = <0 0xffca0000 0 0x1004>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 124>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,r8a7744-cmt1",
+ "renesas,rcar-gen2-cmt1";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 329>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 329>;
+ status = "disabled";
+ };
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&thermal>;
+
+ trips {
+ cpu-crit {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ /* External USB clock - can be overridden by the board */
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 22da819..40b7f98 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -6,6 +6,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "r8a77470.dtsi"
/ {
model = "iWave iW-RainboW-G23S single board computer based on RZ/G1C";
@@ -25,9 +26,43 @@
device_type = "memory";
reg = <0 0x40000000 0 0x20000000>;
};
+
+ reg_1p8v: reg-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: reg-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vccq_sdhi2: regulator-vccq-sdhi2 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI2 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
};
&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+
phy-handle = <&phy3>;
phy-mode = "gmii";
renesas,no-ether-link;
@@ -41,15 +76,73 @@
};
};
+&cmt0 {
+ status = "okay";
+};
+
&extal_clk {
clock-frequency = <20000000>;
};
&pfc {
+ avb_pins: avb {
+ groups = "avb_mdio", "avb_gmii_tx_rx";
+ function = "avb";
+ };
+
+ mmc_pins_uhs: mmc_uhs {
+ groups = "mmc_data8", "mmc_ctrl";
+ function = "mmc";
+ power-source = <1800>;
+ };
+
+ qspi0_pins: qspi0 {
+ groups = "qspi0_ctrl", "qspi0_data2";
+ function = "qspi0";
+ };
+
scif1_pins: scif1 {
groups = "scif1_data_b";
function = "scif1";
};
+
+ sdhi2_pins: sd2 {
+ groups = "sdhi2_data4", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <3300>;
+ };
+
+ sdhi2_pins_uhs: sd2_uhs {
+ groups = "sdhi2_data4", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <1800>;
+ };
+};
+
+&qspi0 {
+ pinctrl-0 = <&qspi0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ /* WARNING - This device contains the bootloader. Handle with care. */
+ flash: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "issi,is25lp016d", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <133000000>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <1>;
+ m25p,fast-read;
+ spi-cpol;
+ spi-cpha;
+ };
+};
+
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
};
&scif1 {
@@ -58,3 +151,29 @@
status = "okay";
};
+
+&sdhi1 {
+ pinctrl-0 = <&mmc_pins_uhs>;
+ pinctrl-names = "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ fixed-emmc-driver-type = <1>;
+ status = "okay";
+};
+
+&sdhi2 {
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-1 = <&sdhi2_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <&vccq_sdhi2>;
+ bus-width = <4>;
+ cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+ sd-uhs-sdr50;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 9ec78d3..f4e232bf 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -14,6 +14,14 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -71,6 +79,16 @@
#size-cells = <2>;
ranges;
+ rwdt: watchdog@e6020000 {
+ compatible = "renesas,r8a77470-wdt",
+ "renesas,rcar-gen2-wdt";
+ reg = <0 0xe6020000 0 0x0c>;
+ clocks = <&cpg CPG_MOD 402>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 402>;
+ status = "disabled";
+ };
+
gpio0: gpio@e6050000 {
compatible = "renesas,gpio-r8a77470",
"renesas,rcar-gen2-gpio";
@@ -237,6 +255,62 @@
reg = <0 0xe6300000 0 0x20000>;
};
+ i2c0: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77470",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6518000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77470",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6518000 0 0x40>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 930>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6530000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77470",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6530000 0 0x40>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 929>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e6540000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77470",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6540000 0 0x40>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 928>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
i2c4: i2c@e6520000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -251,6 +325,62 @@
status = "disabled";
};
+ usb_dmac00: dma-controller@e65a0000 {
+ compatible = "renesas,r8a77470-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65a0000 0 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 330>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 330>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb_dmac10: dma-controller@e65b0000 {
+ compatible = "renesas,r8a77470-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65b0000 0 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 331>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 331>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb_dmac01: dma-controller@e65a8000 {
+ compatible = "renesas,r8a77470-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65a8000 0 0x100>;
+ interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 326>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 326>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb_dmac11: dma-controller@e65b8000 {
+ compatible = "renesas,r8a77470-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65b8000 0 0x100>;
+ interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 327>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 327>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a77470",
"renesas,rcar-dmac";
@@ -330,6 +460,38 @@
status = "disabled";
};
+ qspi0: spi@e6b10000 {
+ compatible = "renesas,qspi-r8a77470", "renesas,qspi";
+ reg = <0 0xe6b10000 0 0x2c>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+ <&dmac1 0x17>, <&dmac1 0x18>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&cpg 918>;
+ status = "disabled";
+ };
+
+ qspi1: spi@ee200000 {
+ compatible = "renesas,qspi-r8a77470", "renesas,qspi";
+ reg = <0 0xee200000 0 0x2c>;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+ <&dmac1 0xd1>, <&dmac1 0xd2>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&cpg 917>;
+ status = "disabled";
+ };
+
scif0: serial@e6e60000 {
compatible = "renesas,scif-r8a77470",
"renesas,rcar-gen2-scif", "renesas,scif";
@@ -426,6 +588,32 @@
status = "disabled";
};
+ sdhi0: sd@ee100000 {
+ compatible = "renesas,sdhi-r8a77470",
+ "renesas,rcar-gen2-sdhi";
+ reg = <0 0xee100000 0 0x328>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 314>;
+ dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+ <&dmac1 0xcd>, <&dmac1 0xce>;
+ dma-names = "tx", "rx", "tx", "rx";
+ max-frequency = <156000000>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
+ status = "disabled";
+ };
+
+ sdhi1: sd@ee300000 {
+ compatible = "renesas,sdhi-mmc-r8a77470";
+ reg = <0 0xee300000 0 0x2000>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 313>;
+ max-frequency = <156000000>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 313>;
+ status = "disabled";
+ };
+
sdhi2: sd@ee160000 {
compatible = "renesas,sdhi-r8a77470",
"renesas,rcar-gen2-sdhi";
@@ -435,7 +623,7 @@
dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
<&dmac1 0xd3>, <&dmac1 0xd4>;
dma-names = "tx", "rx", "tx", "rx";
- max-frequency = <97500000>;
+ max-frequency = <78000000>;
power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 312>;
status = "disabled";
@@ -459,6 +647,38 @@
compatible = "renesas,prr";
reg = <0 0xff000044 0 4>;
};
+
+ cmt0: timer@ffca0000 {
+ compatible = "renesas,r8a77470-cmt0",
+ "renesas,rcar-gen2-cmt0";
+ reg = <0 0xffca0000 0 0x1004>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 124>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,r8a77470-cmt1",
+ "renesas,rcar-gen2-cmt1";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 329>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 329>;
+ status = "disabled";
+ };
};
timer {
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 50312e7..7b9508e 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -489,8 +489,6 @@
};
&lvds1 {
- status = "okay";
-
ports {
port@1 {
lvds_connector: endpoint {
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index ce22db0..e6580aa 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -479,8 +479,6 @@
};
&lvds0 {
- status = "okay";
-
ports {
port@1 {
lvds_connector: endpoint {
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index f02036e5..fefdf82 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -482,8 +482,6 @@
};
&lvds0 {
- status = "okay";
-
ports {
port@1 {
lvds_connector: endpoint {
diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
index eaf9497..4c1ab49 100644
--- a/arch/arm/boot/dts/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/r9a06g032.dtsi
@@ -165,7 +165,15 @@
status = "disabled";
};
- gic: gic@44101000 {
+ pinctrl: pin-controller@40067000 {
+ compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl";
+ reg = <0x40067000 0x1000>, <0x51000000 0x480>;
+ clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>;
+ clock-names = "bus";
+ status = "okay";
+ };
+
+ gic: interrupt-controller@44101000 {
compatible = "arm,cortex-a7-gic", "arm,gic-400";
interrupt-controller;
#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 2ab3c4b..112d2bf 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3066a-cru.h>
+#include <dt-bindings/power/rk3066-power.h>
#include "rk3xxx.dtsi"
/ {
@@ -595,6 +596,7 @@
"ppmmu2",
"pp3",
"ppmmu3";
+ power-domains = <&power RK3066_PD_GPU>;
};
&i2c0 {
@@ -643,6 +645,56 @@
dma-names = "rx-tx";
};
+&pmu {
+ power: power-controller {
+ compatible = "rockchip,rk3066-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pd_vio@RK3066_PD_VIO {
+ reg = <RK3066_PD_VIO>;
+ clocks = <&cru ACLK_LCDC0>,
+ <&cru ACLK_LCDC1>,
+ <&cru DCLK_LCDC0>,
+ <&cru DCLK_LCDC1>,
+ <&cru HCLK_LCDC0>,
+ <&cru HCLK_LCDC1>,
+ <&cru SCLK_CIF1>,
+ <&cru ACLK_CIF1>,
+ <&cru HCLK_CIF1>,
+ <&cru SCLK_CIF0>,
+ <&cru ACLK_CIF0>,
+ <&cru HCLK_CIF0>,
+ <&cru ACLK_IPP>,
+ <&cru HCLK_IPP>,
+ <&cru ACLK_RGA>,
+ <&cru HCLK_RGA>;
+ pm_qos = <&qos_lcdc0>,
+ <&qos_lcdc1>,
+ <&qos_cif0>,
+ <&qos_cif1>,
+ <&qos_ipp>,
+ <&qos_rga>;
+ };
+
+ pd_video@RK3066_PD_VIDEO {
+ reg = <RK3066_PD_VIDEO>;
+ clocks = <&cru ACLK_VDPU>,
+ <&cru ACLK_VEPU>,
+ <&cru HCLK_VDPU>,
+ <&cru HCLK_VEPU>;
+ pm_qos = <&qos_vpu>;
+ };
+
+ pd_gpu@RK3066_PD_GPU {
+ reg = <RK3066_PD_GPU>;
+ clocks = <&cru ACLK_GPU>;
+ pm_qos = <&qos_gpu>;
+ };
+ };
+};
+
&pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_out>;
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index b6f7909..7e0dc52 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3188-cru.h>
+#include <dt-bindings/power/rk3188-power.h>
#include "rk3xxx.dtsi"
/ {
@@ -80,6 +81,7 @@
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_LCDC0>, <&cru DCLK_LCDC0>, <&cru HCLK_LCDC0>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ power-domains = <&power RK3188_PD_VIO>;
resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
reset-names = "axi", "ahb", "dclk";
status = "disabled";
@@ -96,6 +98,7 @@
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_LCDC1>, <&cru DCLK_LCDC1>, <&cru HCLK_LCDC1>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ power-domains = <&power RK3188_PD_VIO>;
resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
reset-names = "axi", "ahb", "dclk";
status = "disabled";
@@ -620,6 +623,7 @@
"ppmmu2",
"pp3",
"ppmmu3";
+ power-domains = <&power RK3188_PD_GPU>;
};
&i2c0 {
@@ -652,6 +656,53 @@
pinctrl-0 = <&i2c4_xfer>;
};
+&pmu {
+ power: power-controller {
+ compatible = "rockchip,rk3188-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pd_vio@RK3188_PD_VIO {
+ reg = <RK3188_PD_VIO>;
+ clocks = <&cru ACLK_LCDC0>,
+ <&cru ACLK_LCDC1>,
+ <&cru DCLK_LCDC0>,
+ <&cru DCLK_LCDC1>,
+ <&cru HCLK_LCDC0>,
+ <&cru HCLK_LCDC1>,
+ <&cru SCLK_CIF0>,
+ <&cru ACLK_CIF0>,
+ <&cru HCLK_CIF0>,
+ <&cru ACLK_IPP>,
+ <&cru HCLK_IPP>,
+ <&cru ACLK_RGA>,
+ <&cru HCLK_RGA>;
+ pm_qos = <&qos_lcdc0>,
+ <&qos_lcdc1>,
+ <&qos_cif0>,
+ <&qos_cif1>,
+ <&qos_ipp>,
+ <&qos_rga>;
+ };
+
+ pd_video@RK3188_PD_VIDEO {
+ reg = <RK3188_PD_VIDEO>;
+ clocks = <&cru ACLK_VDPU>,
+ <&cru ACLK_VEPU>,
+ <&cru HCLK_VDPU>,
+ <&cru HCLK_VEPU>;
+ pm_qos = <&qos_vpu>;
+ };
+
+ pd_gpu@RK3188_PD_GPU {
+ reg = <RK3188_PD_GPU>;
+ clocks = <&cru ACLK_GPU>;
+ pm_qos = <&qos_gpu>;
+ };
+ };
+};
+
&pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_out>;
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index cd8f2a3..29f1907 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -493,12 +493,18 @@
map0 {
trip = <&cpu_alert0>;
cooling-device =
- <&cpu0 THERMAL_NO_LIMIT 6>;
+ <&cpu0 THERMAL_NO_LIMIT 6>,
+ <&cpu1 THERMAL_NO_LIMIT 6>,
+ <&cpu2 THERMAL_NO_LIMIT 6>,
+ <&cpu3 THERMAL_NO_LIMIT 6>;
};
map1 {
trip = <&cpu_alert1>;
cooling-device =
- <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
index 5032548..32e1ab3 100644
--- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -25,7 +25,7 @@
vcc_flash: flash-regulator {
compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
+ regulator-name = "vcc_flash";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
startup-delay-us = <150>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
index 1e0158a..d889ab3 100644
--- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
@@ -81,8 +81,10 @@
*/
cpu_warm_limit_cpu {
trip = <&cpu_alert_warm>;
- cooling-device =
- <&cpu0 THERMAL_NO_LIMIT 4>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT 4>,
+ <&cpu1 THERMAL_NO_LIMIT 4>,
+ <&cpu2 THERMAL_NO_LIMIT 4>,
+ <&cpu3 THERMAL_NO_LIMIT 4>;
};
/*
@@ -103,23 +105,25 @@
*/
cpu_almost_hot_limit_cpu {
trip = <&cpu_alert_almost_hot>;
- cooling-device =
- <&cpu0 5 6>;
+ cooling-device = <&cpu0 5 6>, <&cpu1 5 6>, <&cpu2 5 6>,
+ <&cpu3 5 6>;
};
cpu_hot_limit_cpu {
trip = <&cpu_alert_hot>;
- cooling-device =
- <&cpu0 7 7>;
+ cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, <&cpu2 7 7>,
+ <&cpu3 7 7>;
};
cpu_hotter_limit_cpu {
trip = <&cpu_alert_hotter>;
- cooling-device =
- <&cpu0 7 8>;
+ cooling-device = <&cpu0 7 8>, <&cpu1 7 8>, <&cpu2 7 8>,
+ <&cpu3 7 8>;
};
cpu_very_hot_limit_cpu {
trip = <&cpu_alert_very_hot>;
- cooling-device =
- <&cpu0 8 THERMAL_NO_LIMIT>;
+ cooling-device = <&cpu0 8 THERMAL_NO_LIMIT>,
+ <&cpu1 8 THERMAL_NO_LIMIT>,
+ <&cpu2 8 THERMAL_NO_LIMIT>,
+ <&cpu3 8 THERMAL_NO_LIMIT>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 0840ffb..1da86e8 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -508,12 +508,18 @@
map0 {
trip = <&cpu_alert0>;
cooling-device =
- <&cpu0 THERMAL_NO_LIMIT 6>;
+ <&cpu0 THERMAL_NO_LIMIT 6>,
+ <&cpu1 THERMAL_NO_LIMIT 6>,
+ <&cpu2 THERMAL_NO_LIMIT 6>,
+ <&cpu3 THERMAL_NO_LIMIT 6>;
};
map1 {
trip = <&cpu_alert1>;
cooling-device =
- <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
@@ -541,7 +547,10 @@
map0 {
trip = <&gpu_alert0>;
cooling-device =
- <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index d752dc61..97307a4 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -147,6 +147,46 @@
status = "disabled";
};
+ qos_gpu: qos@1012d000 {
+ compatible = "syscon";
+ reg = <0x1012d000 0x20>;
+ };
+
+ qos_vpu: qos@1012e000 {
+ compatible = "syscon";
+ reg = <0x1012e000 0x20>;
+ };
+
+ qos_lcdc0: qos@1012f000 {
+ compatible = "syscon";
+ reg = <0x1012f000 0x20>;
+ };
+
+ qos_cif0: qos@1012f080 {
+ compatible = "syscon";
+ reg = <0x1012f080 0x20>;
+ };
+
+ qos_ipp: qos@1012f100 {
+ compatible = "syscon";
+ reg = <0x1012f100 0x20>;
+ };
+
+ qos_lcdc1: qos@1012f180 {
+ compatible = "syscon";
+ reg = <0x1012f180 0x20>;
+ };
+
+ qos_cif1: qos@1012f200 {
+ compatible = "syscon";
+ reg = <0x1012f200 0x20>;
+ };
+
+ qos_rga: qos@1012f280 {
+ compatible = "syscon";
+ reg = <0x1012f280 0x20>;
+ };
+
usb_otg: usb@10180000 {
compatible = "rockchip,rk3066-usb", "snps,dwc2";
reg = <0x10180000 0x40000>;
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 75f454a..12eac89 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -627,6 +627,15 @@
samsung,lcd-wb;
};
};
+
+ jpeg_codec: jpeg-codec@fb600000 {
+ compatible = "samsung,s5pv210-jpeg";
+ reg = <0xfb600000 0x1000>;
+ interrupt-parent = <&vic2>;
+ interrupts = <8>;
+ clocks = <&clocks CLK_JPEG>;
+ clock-names = "jpeg";
+ };
};
};
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index e8f0a07..3383699 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the SH73A0 SoC
+ * Device Tree Source for the SH-Mobile AG5 (R8A73A00/SH73A0) SoC
*
* Copyright (C) 2012 Renesas Solutions Corp.
*/
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 2d30039..dcb8fba 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -1,18 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2012 Altera <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ * Copyright (C) 2012 Altera <www.altera.com>
*/
#include <dt-bindings/reset/altr,rst-mgr.h>
@@ -758,7 +746,6 @@
<0xffb80000 0x10000>;
reg-names = "nand_data", "denali_reg";
interrupts = <0x0 0x90 0x4>;
- dma-mask = <0xffffffff>;
clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
clock-names = "nand", "nand_x", "ecc";
status = "disabled";
@@ -771,7 +758,7 @@
qspi: spi@ff705000 {
compatible = "cdns,qspi-nor";
- #address-cells = <1>;
+ #address-cells = <1>;
#size-cells = <0>;
reg = <0xff705000 0x1000>,
<0xffa00000 0x1000>;
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 59ef13e..e41fa23 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright Altera Corporation (C) 2014. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -664,7 +653,6 @@
<0xffb80000 0x10000>;
reg-names = "nand_data", "denali_reg";
interrupts = <0 99 4>;
- dma-mask = <0xffffffff>;
clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
clock-names = "nand", "nand_x", "ecc";
status = "disabled";
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
index 64cc86a9..360dae5 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
@@ -1,18 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2015 Altera Corporation <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "socfpga_arria10.dtsi"
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts
index d14f9cc..e36e0a0 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts
@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2015 Altera Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
index beb2fc6..b4c0a76 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2016 Intel. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
index 5822fd2..df2bab1 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
@@ -1,18 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2014-2015 Altera Corporation <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi
index e59461f..22dbf07 100644
--- a/arch/arm/boot/dts/socfpga_arria5.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria5.dtsi
@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (C) 2013 Altera Corporation <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index aac4fee..90e676e 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -1,18 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2013 Altera Corporation <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
*/
#include "socfpga_arria5.dtsi"
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
index 68ced67..319a71e 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi
+++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
@@ -1,18 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2012 Altera Corporation <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
index 31b01a9..67076e1 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright Altera Corporation (C) 2015. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "socfpga_cyclone5.dtsi"
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
index 3c03da6..bd92806 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
+++ b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
@@ -1,18 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2015 Marek Vasut <[email protected]>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "socfpga_cyclone5.dtsi"
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
index c2eb88a..ceaec29 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
@@ -1,18 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2015 Marek Vasut <[email protected]>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "socfpga_cyclone5_mcv.dtsi"
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index 155829f9..6f138b2 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -1,18 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2012 Altera Corporation <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
*/
#include "socfpga_cyclone5.dtsi"
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index a4a555c..c155ff0 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -1,18 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2013 Steffen Trumtrar <[email protected]>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ * Copyright (C) 2013 Steffen Trumtrar <[email protected]>
*/
#include "socfpga_cyclone5.dtsi"
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
index 031c721..8d5d399 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
@@ -1,18 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2014 Steffen Trumtrar <[email protected]>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ * Copyright (C) 2014 Steffen Trumtrar <[email protected]>
*/
#include "socfpga_cyclone5.dtsi"
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
index 8860dd2e..99a7175 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
@@ -1,18 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2016 Nobuhiro Iwamatsu <[email protected]>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ * Copyright (C) 2016 Nobuhiro Iwamatsu <[email protected]>
*/
#include "socfpga_cyclone5.dtsi"
@@ -123,9 +111,9 @@
};
&qspi {
- status = "okay";
+ status = "okay";
- flash0: n25q512a@0 {
+ flash0: n25q512a@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q512a";
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
index e61efe1..355b3db 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
/*
- * Copyright (C) 2015 Marek Vasut <[email protected]>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2015 Marek Vasut <[email protected]>
*/
#include "socfpga_cyclone5.dtsi"
diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts
index 547c386..a77846f 100644
--- a/arch/arm/boot/dts/socfpga_vt.dts
+++ b/arch/arm/boot/dts/socfpga_vt.dts
@@ -1,18 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2013 Altera Corporation <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
index 221acd10..2f0d966 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
@@ -63,8 +63,6 @@
compatible = "gpio-keys-polled";
pinctrl-names = "default";
pinctrl-0 = <&key_pins_inet9f>;
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
left-joystick-left {
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index b97a0f2..d82a604 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -76,8 +76,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
back {
label = "Key Back";
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 3d62a89..5d46bb0 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -530,8 +530,6 @@
};
hdmi_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
};
};
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
index 39504d7..64d50fc 100644
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
@@ -75,8 +75,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp152: pmic@30 {
@@ -89,8 +87,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t003>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
@@ -106,13 +102,7 @@
};
&pio {
- mmc0_cd_pin_t003: mmc0_cd_pin@0 {
- pins = "PG1";
- function = "gpio_in";
- bias-pull-up;
- };
-
- led_pins_t003: led_pins@0 {
+ led_pins_t003: led-pin {
pins = "PB2";
function = "gpio_out";
drive-strength = <20>;
@@ -131,7 +121,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
index 8d4fb93..c88f089 100644
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
@@ -71,8 +71,6 @@
reg_vmmc1: vmmc1 {
compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_vcc_en_pin_t004>;
regulator-name = "vmmc1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -86,8 +84,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp152: pmic@30 {
@@ -100,8 +96,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
@@ -109,8 +103,6 @@
};
&mmc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins_a>;
vmmc-supply = <®_vmmc1>;
bus-width = <4>;
non-removable;
@@ -127,24 +119,13 @@
};
&pio {
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PG12";
function = "gpio_in";
bias-pull-up;
};
- mmc0_cd_pin_t004: mmc0_cd_pin@0 {
- pins = "PG1";
- function = "gpio_in";
- bias-pull-up;
- };
-
- mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 {
- pins = "PB18";
- function = "gpio_out";
- };
-
- led_pins_t004: led_pins@0 {
+ led_pins_t004: led-pin {
pins = "PB2";
function = "gpio_out";
drive-strength = <20>;
@@ -158,7 +139,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/sun5i-a10s-mk802.dts
index dd7fd5c..6e90ccb 100644
--- a/arch/arm/boot/dts/sun5i-a10s-mk802.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-mk802.dts
@@ -59,8 +59,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_mk802>;
red {
label = "mk802:red:usr";
@@ -74,8 +72,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp152: pmic@30 {
@@ -88,8 +84,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
@@ -97,8 +91,6 @@
};
&mmc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
non-removable;
@@ -113,33 +105,14 @@
status = "okay";
};
-&pio {
- led_pins_mk802: led_pins@0 {
- pins = "PB2";
- function = "gpio_out";
- };
-
- mmc0_cd_pin_mk802: mmc0_cd_pin@0 {
- pins = "PG1";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb1_vbus_pin_mk802: usb1_vbus_pin@0 {
- pins = "PB10";
- function = "gpio_out";
- };
-};
-
®_usb1_vbus {
- pinctrl-0 = <&usb1_vbus_pin_mk802>;
gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index 2c902ed..262c2ff 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -97,7 +97,7 @@
&emac {
pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_b>;
+ pinctrl-0 = <&emac_pa_pins>;
phy = <&phy1>;
status = "okay";
};
@@ -117,8 +117,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp152: pmic@30 {
@@ -130,8 +128,6 @@
#include "axp152.dtsi"
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
at24@50 {
@@ -143,8 +139,6 @@
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
@@ -152,35 +146,35 @@
vref-supply = <®_vcc3v0>;
status = "okay";
- button@191 {
+ button-191 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <191274>;
};
- button@392 {
+ button-392 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <392644>;
};
- button@601 {
+ button-601 {
label = "Menu";
linux,code = <KEY_MENU>;
channel = <0>;
voltage = <601151>;
};
- button@795 {
+ button-795 {
label = "Enter";
linux,code = <KEY_ENTER>;
channel = <0>;
voltage = <795090>;
};
- button@987 {
+ button-987 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
@@ -197,8 +191,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
@@ -206,8 +198,6 @@
};
&mmc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */
@@ -223,30 +213,13 @@
};
&pio {
- mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
- pins = "PG1";
- function = "gpio_in";
- bias-pull-up;
- };
-
- mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
- pins = "PG13";
- function = "gpio_in";
- bias-pull-up;
- };
-
- led_pins_olinuxino: led_pins@0 {
+ led_pins_olinuxino: led-pin {
pins = "PE3";
function = "gpio_out";
drive-strength = <20>;
};
- usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
- pins = "PB10";
- function = "gpio_out";
- };
-
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PG12";
function = "gpio_in";
bias-pull-up;
@@ -259,15 +232,14 @@
};
®_usb1_vbus {
- pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&spi2 {
pinctrl-names = "default";
- pinctrl-0 = <&spi2_pins_b>,
- <&spi2_cs0_pins_b>;
+ pinctrl-0 = <&spi2_pb_pins>,
+ <&spi2_cs0_pb_pin>;
status = "okay";
};
@@ -277,19 +249,19 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins_b>;
+ pinctrl-0 = <&uart2_pc_pins>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins_a>;
+ pinctrl-0 = <&uart3_pg_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
index 034853d1..b2a49a2 100644
--- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
@@ -76,8 +76,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
@@ -85,8 +83,6 @@
};
&mmc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
non-removable;
@@ -98,33 +94,21 @@
};
&pio {
- mmc0_cd_pin_r7: mmc0_cd_pin@0 {
- pins = "PG1";
- function = "gpio_in";
- bias-pull-up;
- };
-
- led_pins_r7: led_pins@0 {
+ led_pins_r7: led-pin {
pins = "PB2";
function = "gpio_out";
drive-strength = <20>;
};
-
- usb1_vbus_pin_r7: usb1_vbus_pin@0 {
- pins = "PG13";
- function = "gpio_out";
- };
};
®_usb1_vbus {
- pinctrl-0 = <&usb1_vbus_pin_r7>;
gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
index 3f68ef5..b5ee8fb 100644
--- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
@@ -61,8 +61,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_wobo_i5>;
blue {
label = "a10s-wobo-i5:blue:usr";
@@ -73,8 +71,6 @@
reg_emac_3v3: emac-3v3 {
compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&emac_power_pin_wobo>;
regulator-name = "emac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -94,7 +90,7 @@
&emac {
pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
+ pinctrl-0 = <&emac_pd_pins>;
phy = <&phy1>;
status = "okay";
};
@@ -104,8 +100,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -126,8 +120,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_wobo_i5>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 */
@@ -142,24 +134,6 @@
status = "okay";
};
-&pio {
- led_pins_wobo_i5: led_pins@0 {
- pins = "PB2";
- function = "gpio_out";
- };
-
- mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 {
- pins = "PB3";
- function = "gpio_in";
- bias-pull-up;
- };
-
- emac_power_pin_wobo: emac_power_pin@0 {
- pins = "PA02";
- function = "gpio_out";
- };
-};
-
®_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -206,7 +180,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 316cb8b..09c486b 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -42,15 +42,11 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton.dtsi"
-
#include "sun5i.dtsi"
#include <dt-bindings/dma/sun4i-a10.h>
/ {
- interrupt-parent = <&intc>;
-
aliases {
ethernet0 = &emac;
};
@@ -60,7 +56,7 @@
#size-cells = <1>;
ranges;
- framebuffer@2 {
+ framebuffer-lcd0-hdmi {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
@@ -76,7 +72,7 @@
allwinner,pipelines = <&fe0>;
};
- soc@1c00000 {
+ soc {
hdmi: hdmi@1c16000 {
compatible = "allwinner,sun5i-a10s-hdmi";
reg = <0x01c16000 0x1000>;
@@ -104,8 +100,6 @@
};
hdmi_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
};
};
@@ -125,20 +119,25 @@
compatible = "allwinner,sun5i-a10s-ccu";
};
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+};
+
&pio {
compatible = "allwinner,sun5i-a10s-pinctrl";
- uart0_pins_a: uart0@0 {
+ uart0_pb_pins: uart0-pb-pins {
pins = "PB19", "PB20";
function = "uart0";
};
- uart2_pins_b: uart2@1 {
+ uart2_pc_pins: uart2-pc-pins {
pins = "PC18", "PC19";
function = "uart2";
};
- emac_pins_b: emac0@1 {
+ emac_pa_pins: emac-pa-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
"PA7", "PA8", "PA9", "PA10",
@@ -147,27 +146,24 @@
function = "emac";
};
- mmc1_pins_a: mmc1@0 {
+ mmc1_pins: mmc1-pins {
pins = "PG3", "PG4", "PG5",
"PG6", "PG7", "PG8";
function = "mmc1";
drive-strength = <30>;
};
- spi2_pins_b: spi2@1 {
+ spi2_pb_pins: spi2-pb-pins {
pins = "PB12", "PB13", "PB14";
function = "spi2";
};
- spi2_cs0_pins_b: spi2_cs0@1 {
+ spi2_cs0_pb_pin: spi2-cs0-pb-pin {
pins = "PB11";
function = "spi2";
};
};
-&sram_a {
-};
-
&tcon0_out {
tcon0_out_hdmi: endpoint@2 {
reg = <2>;
diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
index 378214d..f3cede9 100644
--- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
+++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
@@ -78,8 +78,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -91,8 +89,6 @@
#include "axp209.dtsi"
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
pcf8563: rtc@51 {
@@ -105,14 +101,14 @@
vref-supply = <®_ldo2>;
status = "okay";
- button@200 {
+ button-200 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <200000>;
};
- button@400 {
+ button-400 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
@@ -121,8 +117,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
@@ -134,19 +128,13 @@
};
&pio {
- mmc0_cd_pin_d709: mmc0_cd_pin@0 {
- pins = "PG0";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PG1";
function = "gpio_in";
bias-pull-down;
};
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PG2";
function = "gpio_in";
bias-pull-up;
@@ -155,7 +143,7 @@
&pwm {
pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pins>;
+ pinctrl-0 = <&pwm0_pin>;
status = "okay";
};
@@ -197,7 +185,7 @@
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_b>;
+ pinctrl-0 = <&uart1_pg_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
index 7ee0c3f..9369f745 100644
--- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
+++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
@@ -69,8 +69,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -80,8 +78,6 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
pcf8563: rtc@51 {
@@ -91,8 +87,6 @@
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
@@ -100,14 +94,14 @@
vref-supply = <®_ldo2>;
status = "okay";
- button@200 {
+ button-200 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <200000>;
};
- button@400 {
+ button-400 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
@@ -116,8 +110,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
@@ -133,22 +125,11 @@
};
&pio {
- mmc0_cd_pin_h702: mmc0_cd_pin@0 {
- pins = "PG0";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PG2";
function = "gpio_in";
bias-pull-up;
};
-
- usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- pins = "PG1";
- function = "gpio_in";
- };
};
#include "axp209.dtsi"
@@ -191,7 +172,7 @@
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_b>;
+ pinctrl-0 = <&uart1_pg_pins>;
status = "okay";
};
@@ -202,7 +183,7 @@
&usbphy {
pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
usb0_vbus-supply = <®_usb0_vbus>;
diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
index bc88389..ca8f3fd 100644
--- a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
+++ b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
@@ -94,8 +94,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -109,14 +107,10 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "disabled";
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "disabled";
};
@@ -124,7 +118,7 @@
vref-supply = <®_ldo2>;
status = "okay";
- button@984 {
+ button-984 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
@@ -133,8 +127,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
broken-cd;
@@ -143,7 +135,7 @@
&mmc2 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc2_4bit_pins_a>;
+ pinctrl-0 = <&mmc2_4bit_pc_pins>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
broken-cd;
@@ -204,7 +196,7 @@
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_b>;
+ pinctrl-0 = <&uart1_pg_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
index aa4b34f..943868e 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
@@ -77,26 +77,18 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
@@ -112,56 +104,38 @@
};
&pio {
- mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
- pins = "PG0";
- function = "gpio_in";
- bias-pull-up;
- };
-
- led_pins_olinuxinom: led_pins@0 {
+ led_pins_olinuxinom: led-pin {
pins = "PG9";
function = "gpio_out";
drive-strength = <20>;
};
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PG2";
function = "gpio_in";
bias-pull-up;
};
- usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PG1";
function = "gpio_in";
bias-pull-down;
};
-
- usb0_vbus_pin_olinuxinom: usb0_vbus_pin@0 {
- pins = "PG12";
- function = "gpio_out";
- };
-
- usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
- pins = "PG11";
- function = "gpio_out";
- };
};
®_usb0_vbus {
- pinctrl-0 = <&usb0_vbus_pin_olinuxinom>;
gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;
status = "okay";
};
®_usb1_vbus {
- pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_b>;
+ pinctrl-0 = <&uart1_pg_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 437ad91..9409c23 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -123,8 +123,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -138,14 +136,10 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
@@ -153,35 +147,35 @@
vref-supply = <®_vcc3v0>;
status = "okay";
- button@191 {
+ button-191 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <191274>;
};
- button@392 {
+ button-392 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <392644>;
};
- button@601 {
+ button-601 {
label = "Menu";
linux,code = <KEY_MENU>;
channel = <0>;
voltage = <601151>;
};
- button@795 {
+ button-795 {
label = "Enter";
linux,code = <KEY_ENTER>;
channel = <0>;
voltage = <795090>;
};
- button@987 {
+ button-987 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
@@ -190,8 +184,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
@@ -207,34 +199,23 @@
};
&pio {
- mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
- pins = "PG0";
- function = "gpio_in";
- bias-pull-up;
- };
-
- led_pins_olinuxino: led_pins@0 {
+ led_pins_olinuxino: led-pin {
pins = "PG9";
function = "gpio_out";
drive-strength = <20>;
};
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PG2";
function = "gpio_in";
bias-pull-up;
};
- usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PG1";
function = "gpio_in";
bias-pull-down;
};
-
- usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
- pins = "PG11";
- function = "gpio_out";
- };
};
®_usb0_vbus {
@@ -243,7 +224,6 @@
};
®_usb1_vbus {
- pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -263,7 +243,7 @@
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_b>;
+ pinctrl-0 = <&uart1_pg_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
index bfdd38d..732873c 100644
--- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
+++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
@@ -58,7 +58,7 @@
/delete-property/stdout-path;
};
- i2c_lcd: i2c@0 {
+ i2c_lcd: i2c-gpio {
/* The lcd panel i2c interface is hooked up via gpios */
compatible = "i2c-gpio";
pinctrl-names = "default";
@@ -79,13 +79,9 @@
allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */
};
-&codec_pa_pin {
- pins = "PG3";
-};
-
&mmc2 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins_a>;
+ pinctrl-0 = <&mmc2_8bit_pins>;
vmmc-supply = <®_vcc3v3>;
bus-width = <8>;
non-removable;
@@ -99,7 +95,7 @@
};
&pio {
- i2c_lcd_pins: i2c_lcd_pin@0 {
+ i2c_lcd_pins: i2c-lcd-pin {
pins = "PG10", "PG12";
function = "gpio_out";
bias-pull-up;
@@ -128,7 +124,3 @@
/* The P66 uses the uart pins as gpios */
status = "disabled";
};
-
-&usb0_vbus_pin_a {
- pins = "PB4";
-};
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index b1d8277..ae04955 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -42,15 +42,11 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton.dtsi"
-
#include "sun5i.dtsi"
#include <dt-bindings/thermal/thermal.h>
/ {
- interrupt-parent = <&intc>;
-
thermal-zones {
cpu_thermal {
/* milliseconds */
@@ -88,7 +84,7 @@
allwinner,pipelines = <&fe0>;
};
- soc@1c00000 {
+ soc {
pwm: pwm@1c20e00 {
compatible = "allwinner,sun5i-a13-pwm";
reg = <0x01c20e00 0xc>;
diff --git a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
index c55b11a..3f70b8c 100644
--- a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
+++ b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
@@ -79,8 +79,6 @@
mmc0_pwrseq: mmc0_pwrseq {
compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_reg_on_pin_chip_pro>;
reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
};
};
@@ -94,8 +92,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -114,20 +110,16 @@
#include "axp209.dtsi"
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "disabled";
};
&i2s0 {
pinctrl-names = "default";
- pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>;
+ pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>;
status = "disabled";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
mmc-pwrseq = <&mmc0_pwrseq>;
bus-width = <4>;
@@ -137,7 +129,7 @@
&nfc {
pinctrl-names = "default";
- pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
+ pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
status = "okay";
nand@0 {
@@ -157,21 +149,9 @@
status = "okay";
};
-&pio {
- usb0_id_pin_chip_pro: usb0-id-pin@0 {
- pins = "PG2";
- function = "gpio_in";
- };
-
- wifi_reg_on_pin_chip_pro: wifi-reg-on-pin@0 {
- pins = "PB10";
- function = "gpio_out";
- };
-};
-
&pwm {
pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pins>, <&pwm1_pins>;
+ pinctrl-0 = <&pwm0_pin>, <&pwm1_pins>;
status = "disabled";
};
@@ -220,19 +200,19 @@
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_b>, <&uart1_cts_rts_pins_a>;
+ pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins_a>, <&uart2_cts_rts_pins_a>;
+ pinctrl-0 = <&uart2_pd_pins>, <&uart2_cts_rts_pd_pins>;
status = "disabled";
};
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins_a>, <&uart3_cts_rts_pins_a>;
+ pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>;
status = "okay";
};
@@ -253,8 +233,6 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_pin_chip_pro>;
usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb1_vbus-supply = <®_vcc5v0>;
diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts
index 5f0adc0..86e46aa5 100644
--- a/arch/arm/boot/dts/sun5i-gr8-evb.dts
+++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts
@@ -123,8 +123,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -143,8 +141,6 @@
#include "axp209.dtsi"
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
wm8978: codec@1a {
@@ -160,20 +156,18 @@
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
&i2s0 {
pinctrl-names = "default";
- pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>;
+ pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
@@ -181,49 +175,49 @@
vref-supply = <®_ldo2>;
status = "okay";
- button@190 {
+ button-190 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <190000>;
};
- button@390 {
+ button-390 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <390000>;
};
- button@600 {
+ button-600 {
label = "Menu";
linux,code = <KEY_MENU>;
channel = <0>;
voltage = <600000>;
};
- button@800 {
+ button-800 {
label = "Search";
linux,code = <KEY_SEARCH>;
channel = <0>;
voltage = <800000>;
};
- button@980 {
+ button-980 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
voltage = <980000>;
};
- button@1180 {
+ button-1180 {
label = "Esc";
linux,code = <KEY_ESC>;
channel = <0>;
voltage = <1180000>;
};
- button@1400 {
+ button-1400 {
label = "Enter";
linux,code = <KEY_ENTER>;
channel = <0>;
@@ -232,8 +226,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gr8_evb>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
@@ -242,7 +234,7 @@
&nfc {
pinctrl-names = "default";
- pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
+ pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
/* MLC Support sucks for now */
status = "disabled";
@@ -256,31 +248,9 @@
status = "okay";
};
-&pio {
- mmc0_cd_pin_gr8_evb: mmc0-cd-pin@0 {
- pins = "PG0";
- function = "gpio_in";
- };
-
- usb0_id_pin_gr8_evb: usb0-id-pin@0 {
- pins = "PG2";
- function = "gpio_in";
- };
-
- usb0_vbus_det_pin_gr8_evb: usb0-vbus-det-pin@0 {
- pins = "PG1";
- function = "gpio_in";
- };
-
- usb1_vbus_pin_gr8_evb: usb1-vbus-pin@0 {
- pins = "PG13";
- function = "gpio_out";
- };
-};
-
&pwm {
pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pins>;
+ pinctrl-0 = <&pwm0_pin>;
status = "okay";
};
@@ -310,7 +280,6 @@
};
®_usb1_vbus {
- pinctrl-0 = <&usb1_vbus_pin_gr8_evb>;
gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -321,7 +290,7 @@
&spdif {
pinctrl-names = "default";
- pinctrl-0 = <&spdif_tx_pins_a>;
+ pinctrl-0 = <&spdif_tx_pin>;
status = "okay";
};
@@ -331,7 +300,7 @@
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_b>, <&uart1_cts_rts_pins_a>;
+ pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>;
status = "okay";
};
@@ -356,8 +325,6 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_pin_gr8_evb>, <&usb0_vbus_det_pin_gr8_evb>;
usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
usb0_vbus_power-supply = <&usb_power_supply>;
diff --git a/arch/arm/boot/dts/sun5i-gr8.dtsi b/arch/arm/boot/dts/sun5i-gr8.dtsi
index ef0b744..98a8fd5 100644
--- a/arch/arm/boot/dts/sun5i-gr8.dtsi
+++ b/arch/arm/boot/dts/sun5i-gr8.dtsi
@@ -54,7 +54,7 @@
allwinner,pipelines = <&fe0>;
};
- soc@1c00000 {
+ soc {
pwm: pwm@1c20e00 {
compatible = "allwinner,sun5i-a10s-pwm";
reg = <0x01c20e00 0xc>;
@@ -98,28 +98,28 @@
&pio {
compatible = "nextthing,gr8-pinctrl";
- i2s0_data_pins_a: i2s0-data@0 {
+ i2s0_data_pins: i2s0-data-pins {
pins = "PB6", "PB7", "PB8", "PB9";
function = "i2s0";
};
- i2s0_mclk_pins_a: i2s0-mclk@0 {
+ i2s0_mclk_pin: i2s0-mclk-pin {
pins = "PB5";
function = "i2s0";
};
- pwm1_pins: pwm1 {
+ pwm1_pins: pwm1-pin {
pins = "PG13";
function = "pwm1";
};
- spdif_tx_pins_a: spdif@0 {
+ spdif_tx_pin: spdif-tx-pin {
pins = "PB10";
function = "spdif";
bias-pull-up;
};
- uart1_cts_rts_pins_a: uart1-cts-rts@0 {
+ uart1_cts_rts_pins: uart1-cts-rts-pins {
pins = "PG5", "PG6";
function = "uart1";
};
diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts
index 879a4b0..f4298fa 100644
--- a/arch/arm/boot/dts/sun5i-r8-chip.dts
+++ b/arch/arm/boot/dts/sun5i-r8-chip.dts
@@ -79,8 +79,6 @@
mmc0_pwrseq: mmc0_pwrseq {
compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
- pinctrl-0 = <&chip_wifi_reg_on_pin>;
reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */
};
@@ -109,8 +107,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -137,14 +133,10 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "disabled";
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
xio: gpio@38 {
@@ -161,13 +153,11 @@
};
};
-&mmc0_pins_a {
+&mmc0_pins {
bias-pull-up;
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
mmc-pwrseq = <&mmc0_pwrseq>;
bus-width = <4>;
@@ -184,22 +174,7 @@
};
&pio {
- chip_vbus_pin: chip_vbus_pin@0 {
- pins = "PB10";
- function = "gpio_out";
- };
-
- chip_wifi_reg_on_pin: chip_wifi_reg_on_pin@0 {
- pins = "PC19";
- function = "gpio_out";
- };
-
- chip_id_det_pin: chip_id_det_pin@0 {
- pins = "PG2";
- function = "gpio_in";
- };
-
- chip_w1_pin: chip_w1_pin@0 {
+ chip_w1_pin: chip-w1-pin {
pins = "PD2";
function = "gpio_in";
bias-pull-up;
@@ -260,7 +235,6 @@
};
®_usb0_vbus {
- pinctrl-0 = <&chip_vbus_pin>;
vin-supply = <®_vcc5v0>;
gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
status = "okay";
@@ -268,7 +242,7 @@
&spi2 {
pinctrl-names = "default";
- pinctrl-0 = <&spi2_pins_a>;
+ pinctrl-0 = <&spi2_pe_pins>;
status = "disabled";
};
@@ -282,14 +256,14 @@
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_b>;
+ pinctrl-0 = <&uart1_pg_pins>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins_a>,
- <&uart3_cts_rts_pins_a>;
+ pinctrl-0 = <&uart3_pg_pins>,
+ <&uart3_cts_rts_pg_pins>;
status = "okay";
};
@@ -303,8 +277,6 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&chip_id_det_pin>;
status = "okay";
usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
index d2a2eb8..6202aab 100644
--- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
@@ -63,8 +63,6 @@
};
&codec {
- pinctrl-names = "default";
- pinctrl-0 = <&codec_pa_pin>;
allwinner,pa-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
status = "okay";
};
@@ -96,8 +94,6 @@
reg = <0x40>;
interrupt-parent = <&pio>;
interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */
- pinctrl-names = "default";
- pinctrl-0 = <&ts_power_pin>;
power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
/* Tablet dts must provide reg and compatible */
status = "disabled";
@@ -125,7 +121,7 @@
&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+ pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <®_vcc3v0>;
bus-width = <4>;
cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
@@ -137,40 +133,17 @@
};
&pio {
- codec_pa_pin: codec_pa_pin@0 {
- pins = "PG10";
- function = "gpio_out";
- };
-
- mmc0_cd_pin: mmc0_cd_pin@0 {
- pins = "PG0";
- function = "gpio_in";
- bias-pull-up;
- };
-
- ts_power_pin: ts_power_pin {
- pins = "PB3";
- function = "gpio_out";
- drive-strength = <10>;
- bias-disable;
- };
-
- usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PG1";
function = "gpio_in";
bias-pull-down;
};
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PG2";
function = "gpio_in";
bias-pull-up;
};
-
- usb0_vbus_pin_a: usb0_vbus_pin@0 {
- pins = "PG12";
- function = "gpio_out";
- };
};
®_dcdc2 {
@@ -211,7 +184,7 @@
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_b>;
+ pinctrl-0 = <&uart1_pg_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 9cd65c4..5497d98 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -42,14 +42,14 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton.dtsi"
-
#include <dt-bindings/clock/sun5i-ccu.h>
#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/reset/sun5i-ccu.h>
/ {
interrupt-parent = <&intc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
cpus {
#address-cells = <1>;
@@ -68,7 +68,7 @@
#size-cells = <1>;
ranges;
- framebuffer@0 {
+ framebuffer-lcd0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
@@ -77,7 +77,7 @@
status = "disabled";
};
- framebuffer@1 {
+ framebuffer-lcd0-tve0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-tve0";
@@ -93,14 +93,14 @@
#size-cells = <1>;
ranges;
- osc24M: clk@1c20050 {
+ osc24M: clk-24M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
- osc32k: clk@0 {
+ osc32k: clk-32k {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
@@ -114,7 +114,7 @@
ranges;
/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
- cma_pool: cma@4a000000 {
+ default-pool {
compatible = "shared-dma-pool";
size = <0x6000000>;
alloc-ranges = <0x4a000000 0x6000000>;
@@ -123,7 +123,7 @@
};
};
- soc@1c00000 {
+ soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -326,6 +326,8 @@
clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
clock-names = "ahb", "mmc";
interrupts = <32>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -446,7 +448,7 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
- emac_pins_a: emac0@0 {
+ emac_pd_pins: emac-pd-pins {
pins = "PD6", "PD7", "PD10",
"PD11", "PD12", "PD13", "PD14",
"PD15", "PD18", "PD19", "PD20",
@@ -455,27 +457,27 @@
function = "emac";
};
- i2c0_pins_a: i2c0@0 {
+ i2c0_pins: i2c0-pins {
pins = "PB0", "PB1";
function = "i2c0";
};
- i2c1_pins_a: i2c1@0 {
+ i2c1_pins: i2c1-pins {
pins = "PB15", "PB16";
function = "i2c1";
};
- i2c2_pins_a: i2c2@0 {
+ i2c2_pins: i2c2-pins {
pins = "PB17", "PB18";
function = "i2c2";
};
- ir0_rx_pins_a: ir0@0 {
+ ir0_rx_pin: ir0-rx-pin {
pins = "PB4";
function = "ir0";
};
- lcd_rgb565_pins: lcd_rgb565@0 {
+ lcd_rgb565_pins: lcd-rgb565-pins {
pins = "PD3", "PD4", "PD5", "PD6", "PD7",
"PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
"PD19", "PD20", "PD21", "PD22", "PD23",
@@ -483,7 +485,7 @@
function = "lcd0";
};
- lcd_rgb666_pins: lcd_rgb666@0 {
+ lcd_rgb666_pins: lcd-rgb666-pins {
pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
"PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
"PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
@@ -491,7 +493,7 @@
function = "lcd0";
};
- mmc0_pins_a: mmc0@0 {
+ mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
function = "mmc0";
@@ -499,7 +501,7 @@
bias-pull-up;
};
- mmc2_pins_a: mmc2@0 {
+ mmc2_8bit_pins: mmc2-8bit-pins {
pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11", "PC12", "PC13",
"PC14", "PC15";
@@ -508,7 +510,7 @@
bias-pull-up;
};
- mmc2_4bit_pins_a: mmc2-4bit@0 {
+ mmc2_4bit_pc_pins: mmc2-4bit-pc-pins {
pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11";
function = "mmc2";
@@ -516,7 +518,7 @@
bias-pull-up;
};
- nand_pins_a: nand-base0@0 {
+ nand_pins: nand-pins {
pins = "PC0", "PC1", "PC2",
"PC5", "PC8", "PC9", "PC10",
"PC11", "PC12", "PC13", "PC14",
@@ -524,57 +526,57 @@
function = "nand0";
};
- nand_cs0_pins_a: nand-cs@0 {
+ nand_cs0_pin: nand-cs0-pin {
pins = "PC4";
function = "nand0";
};
- nand_rb0_pins_a: nand-rb@0 {
+ nand_rb0_pin: nand-rb0-pin {
pins = "PC6";
function = "nand0";
};
- spi2_pins_a: spi2@0 {
+ spi2_pe_pins: spi2-pe-pins {
pins = "PE1", "PE2", "PE3";
function = "spi2";
};
- spi2_cs0_pins_a: spi2-cs0@0 {
+ spi2_cs0_pe_pin: spi2-cs0-pe-pin {
pins = "PE0";
function = "spi2";
};
- uart1_pins_a: uart1@0 {
+ uart1_pe_pins: uart1-pe-pins {
pins = "PE10", "PE11";
function = "uart1";
};
- uart1_pins_b: uart1@1 {
+ uart1_pg_pins: uart1-pg-pins {
pins = "PG3", "PG4";
function = "uart1";
};
- uart2_pins_a: uart2@0 {
+ uart2_pd_pins: uart2-pd-pins {
pins = "PD2", "PD3";
function = "uart2";
};
- uart2_cts_rts_pins_a: uart2-cts-rts@0 {
+ uart2_cts_rts_pd_pins: uart2-cts-rts-pd-pins {
pins = "PD4", "PD5";
function = "uart2";
};
- uart3_pins_a: uart3@0 {
+ uart3_pg_pins: uart3-pg-pins {
pins = "PG9", "PG10";
function = "uart3";
};
- uart3_cts_rts_pins_a: uart3-cts-rts@0 {
+ uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins {
pins = "PG11", "PG12";
function = "uart3";
};
- pwm0_pins: pwm0 {
+ pwm0_pin: pwm0-pin {
pins = "PB2";
function = "pwm";
};
@@ -678,6 +680,8 @@
reg = <0x01c2ac00 0x400>;
interrupts = <7>;
clocks = <&ccu CLK_APB1_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -688,6 +692,8 @@
reg = <0x01c2b000 0x400>;
interrupts = <8>;
clocks = <&ccu CLK_APB1_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -698,6 +704,8 @@
reg = <0x01c2b400 0x400>;
interrupts = <9>;
clocks = <&ccu CLK_APB1_I2C2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
index 7f34323..32d2202 100644
--- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
+++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
@@ -65,22 +65,14 @@
status = "okay";
};
-&pio {
- usb1_vbus_pin_a: usb1_vbus_pin@0 {
- pins = "PH27";
- function = "gpio_out";
- };
-};
-
®_usb1_vbus {
- pinctrl-0 = <&usb1_vbus_pin_a>;
gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts
index 939c497..0b7bedf 100644
--- a/arch/arm/boot/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts
@@ -60,7 +60,7 @@
stdout-path = "serial0:115200n8";
};
- i2c_lcd: i2c@0 {
+ i2c_lcd: i2c {
/* The lcd panel i2c interface is hooked up via gpios */
compatible = "i2c-gpio";
pinctrl-names = "default";
@@ -77,7 +77,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
+ pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
status = "okay";
@@ -88,20 +88,14 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "fail";
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
mma8452: mma8452@1d {
@@ -113,31 +107,14 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
vmmc-supply = <®_vcc3v0>;
bus-width = <4>;
cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
status = "okay";
};
-&mmc0_pins_a {
- bias-pull-up;
-};
-
&pio {
- mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
- pins = "PA8";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
- pins = "PH24";
- function = "gpio_out";
- };
-
- i2c_lcd_pins: i2c_lcd_pin@0 {
+ i2c_lcd_pins: i2c-lcd-pins {
pins = "PA23", "PA24";
function = "gpio_out";
bias-pull-up;
@@ -145,15 +122,13 @@
};
®_usb2_vbus {
- pinctrl-names = "default";
- pinctrl-0 = <&usb2_vbus_pin_colombus>;
gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index ce4f9e9..e17a65b 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -160,7 +160,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_hummingbird>;
+ pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>;
@@ -184,21 +184,15 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
/* pull-ups and devices require AXP221 DLDO3 */
status = "failed";
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
pcf8563: rtc@51 {
@@ -209,27 +203,18 @@
&ir {
pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
+ pinctrl-0 = <&s_ir_rx_pin>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
vmmc-supply = <®_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
status = "okay";
};
-&mmc0_pins_a {
- /* external pull-ups missing for some pins */
- bias-pull-up;
-};
-
&mmc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>;
vmmc-supply = <®_aldo1>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
@@ -241,24 +226,6 @@
status = "okay";
};
-&pio {
- gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 {
- pins = "PA21";
- function = "gpio_out";
- };
-
- mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
- pins = "PA8";
- function = "gpio_in";
- bias-pull-up;
- };
-
- wifi_reset_pin_hummingbird: wifi_reset_pin@0 {
- pins = "PG10";
- function = "gpio_out";
- };
-};
-
&p2wi {
status = "okay";
@@ -354,7 +321,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts
index d659be9..0832ac5 100644
--- a/arch/arm/boot/dts/sun6i-a31-i7.dts
+++ b/arch/arm/boot/dts/sun6i-a31-i7.dts
@@ -71,8 +71,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_i7>;
blue {
label = "i7:blue:usr";
@@ -118,7 +116,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
+ pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
@@ -140,47 +138,25 @@
&ir {
pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
+ pinctrl-0 = <&s_ir_rx_pin>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
status = "okay";
};
-&pio {
- led_pins_i7: led_pins@0 {
- pins = "PH13";
- function = "gpio_out";
- };
-
- mmc0_cd_pin_i7: mmc0_cd_pin@0 {
- pins = "PH22";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb1_vbus_pin_i7: usb1_vbus_pin@0 {
- pins = "PC27";
- function = "gpio_out";
- };
-};
-
®_usb1_vbus {
- pinctrl-names = "default";
- pinctrl-0 = <&usb1_vbus_pin_i7>;
gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&spdif {
pinctrl-names = "default";
- pinctrl-0 = <&spdif_pins_a>;
+ pinctrl-0 = <&spdif_tx_pin>;
spdif-out = "okay";
status = "okay";
};
@@ -191,7 +167,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts
index 9698f6d..6eafb63 100644
--- a/arch/arm/boot/dts/sun6i-a31-m9.dts
+++ b/arch/arm/boot/dts/sun6i-a31-m9.dts
@@ -60,8 +60,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_m9>;
blue {
label = "m9:blue:pwr";
@@ -85,7 +83,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
+ pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-mode = "mii";
phy-supply = <®_dldo1>;
@@ -98,13 +96,11 @@
&ir {
pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
+ pinctrl-0 = <&s_ir_rx_pin>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
vmmc-supply = <®_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
@@ -124,24 +120,6 @@
#include "axp22x.dtsi"
-&pio {
- led_pins_m9: led_pins@0 {
- pins = "PH13";
- function = "gpio_out";
- };
-
- mmc0_cd_pin_m9: mmc0_cd_pin@0 {
- pins = "PH22";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb1_vbus_pin_m9: usb1_vbus_pin@0 {
- pins = "PC27";
- function = "gpio_out";
- };
-};
-
®_aldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -215,15 +193,13 @@
};
®_usb1_vbus {
- pinctrl-names = "default";
- pinctrl-0 = <&usb1_vbus_pin_m9>;
gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
index bb14b17..ca036f9 100644
--- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
+++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
@@ -60,8 +60,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_m9>;
blue {
label = "a1000g:blue:pwr";
@@ -85,7 +83,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
+ pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-mode = "mii";
phy-supply = <®_dldo1>;
@@ -98,13 +96,11 @@
&ir {
pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
+ pinctrl-0 = <&s_ir_rx_pin>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
vmmc-supply = <®_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
@@ -124,24 +120,6 @@
#include "axp22x.dtsi"
-&pio {
- led_pins_m9: led_pins@0 {
- pins = "PH13";
- function = "gpio_out";
- };
-
- mmc0_cd_pin_m9: mmc0_cd_pin@0 {
- pins = "PH22";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb1_vbus_pin_m9: usb1_vbus_pin@0 {
- pins = "PC27";
- function = "gpio_out";
- };
-};
-
®_aldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -215,15 +193,13 @@
};
®_usb1_vbus {
- pinctrl-names = "default";
- pinctrl-0 = <&usb1_vbus_pin_m9>;
gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index debc0bf2..353d90f 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -42,8 +42,6 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton.dtsi"
-
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@@ -52,6 +50,8 @@
/ {
interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
aliases {
ethernet0 = &gmac;
@@ -62,7 +62,7 @@
#size-cells = <1>;
ranges;
- simplefb_hdmi: framebuffer@0 {
+ simplefb_hdmi: framebuffer-lcd0-hdmi {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
@@ -73,7 +73,7 @@
status = "disabled";
};
- simplefb_lcd: framebuffer@1 {
+ simplefb_lcd: framebuffer-lcd0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
@@ -115,7 +115,7 @@
#cooling-cells = <2>;
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
@@ -131,7 +131,7 @@
#cooling-cells = <2>;
};
- cpu@2 {
+ cpu2: cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
@@ -147,7 +147,7 @@
#cooling-cells = <2>;
};
- cpu@3 {
+ cpu3: cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
@@ -174,7 +174,10 @@
cooling-maps {
map0 {
trip = <&cpu_alert0>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
@@ -196,12 +199,8 @@
};
};
- memory {
- reg = <0x40000000 0x80000000>;
- };
-
pmu {
- compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
+ compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
@@ -213,13 +212,13 @@
#size-cells = <1>;
ranges;
- osc24M: osc24M {
+ osc24M: clk-24M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
- osc32k: clk@0 {
+ osc32k: clk-32k {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
@@ -235,14 +234,14 @@
* The actual TX clock rate is not controlled by the
* gmac_tx clock.
*/
- mii_phy_tx_clk: clk@1 {
+ mii_phy_tx_clk: clk-mii-phy-tx {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
clock-output-names = "mii_phy_tx";
};
- gmac_int_tx_clk: clk@2 {
+ gmac_int_tx_clk: clk-gmac-int-tx {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <125000000>;
@@ -264,7 +263,7 @@
status = "disabled";
};
- soc@1c00000 {
+ soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -389,6 +388,8 @@
resets = <&ccu RST_AHB1_MMC0>;
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -408,6 +409,8 @@
resets = <&ccu RST_AHB1_MMC1>;
reset-names = "ahb";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -607,7 +610,7 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
- gmac_pins_gmii_a: gmac_gmii@0 {
+ gmac_gmii_pins: gmac-gmii-pins {
pins = "PA0", "PA1", "PA2", "PA3",
"PA4", "PA5", "PA6", "PA7",
"PA8", "PA9", "PA10", "PA11",
@@ -623,7 +626,7 @@
drive-strength = <30>;
};
- gmac_pins_mii_a: gmac_mii@0 {
+ gmac_mii_pins: gmac-mii-pins {
pins = "PA0", "PA1", "PA2", "PA3",
"PA8", "PA9", "PA11",
"PA12", "PA13", "PA14", "PA19",
@@ -632,7 +635,7 @@
function = "gmac";
};
- gmac_pins_rgmii_a: gmac_rgmii@0 {
+ gmac_rgmii_pins: gmac-rgmii-pins {
pins = "PA0", "PA1", "PA2", "PA3",
"PA9", "PA10", "PA11",
"PA12", "PA13", "PA14", "PA19",
@@ -645,22 +648,22 @@
drive-strength = <40>;
};
- i2c0_pins_a: i2c0@0 {
+ i2c0_pins: i2c0-pins {
pins = "PH14", "PH15";
function = "i2c0";
};
- i2c1_pins_a: i2c1@0 {
+ i2c1_pins: i2c1-pins {
pins = "PH16", "PH17";
function = "i2c1";
};
- i2c2_pins_a: i2c2@0 {
+ i2c2_pins: i2c2-pins {
pins = "PH18", "PH19";
function = "i2c2";
};
- lcd0_rgb888_pins: lcd0_rgb888 {
+ lcd0_rgb888_pins: lcd0-rgb888-pins {
pins = "PD0", "PD1", "PD2", "PD3",
"PD4", "PD5", "PD6", "PD7",
"PD8", "PD9", "PD10", "PD11",
@@ -671,7 +674,7 @@
function = "lcd0";
};
- mmc0_pins_a: mmc0@0 {
+ mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
function = "mmc0";
@@ -679,7 +682,7 @@
bias-pull-up;
};
- mmc1_pins_a: mmc1@0 {
+ mmc1_pins: mmc1-pins {
pins = "PG0", "PG1", "PG2", "PG3",
"PG4", "PG5";
function = "mmc1";
@@ -687,7 +690,7 @@
bias-pull-up;
};
- mmc2_pins_a: mmc2@0 {
+ mmc2_4bit_pins: mmc2-4bit-pins {
pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11";
function = "mmc2";
@@ -695,7 +698,7 @@
bias-pull-up;
};
- mmc2_8bit_emmc_pins: mmc2@1 {
+ mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins {
pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11", "PC12",
"PC13", "PC14", "PC15",
@@ -705,7 +708,7 @@
bias-pull-up;
};
- mmc3_8bit_emmc_pins: mmc3@1 {
+ mmc3_8bit_emmc_pins: mmc3-8bit-emmc-pins {
pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11", "PC12",
"PC13", "PC14", "PC15",
@@ -715,12 +718,12 @@
bias-pull-up;
};
- spdif_pins_a: spdif@0 {
+ spdif_tx_pin: spdif-tx-pin {
pins = "PH28";
function = "spdif";
};
- uart0_pins_a: uart0@0 {
+ uart0_ph_pins: uart0-ph-pins {
pins = "PH20", "PH21";
function = "uart0";
};
@@ -879,6 +882,8 @@
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB2_I2C0>;
resets = <&ccu RST_APB2_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -890,6 +895,8 @@
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB2_I2C1>;
resets = <&ccu RST_APB2_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -901,6 +908,8 @@
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB2_I2C2>;
resets = <&ccu RST_APB2_I2C2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1373,12 +1382,12 @@
#size-cells = <0>;
#gpio-cells = <3>;
- ir_pins_a: ir@0 {
+ s_ir_rx_pin: s-ir-rx-pin {
pins = "PL4";
function = "s_ir";
};
- p2wi_pins: p2wi {
+ s_p2wi_pins: s-p2wi-pins {
pins = "PL0", "PL1";
function = "s_p2wi";
};
@@ -1392,7 +1401,7 @@
clock-frequency = <100000>;
resets = <&apb0_rst 3>;
pinctrl-names = "default";
- pinctrl-0 = <&p2wi_pins>;
+ pinctrl-0 = <&s_p2wi_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
index 882a4d8..a2ef784 100644
--- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
@@ -53,7 +53,7 @@
vref-supply = <®_aldo3>;
status = "okay";
- button@1000 {
+ button-1000 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts
index 75e5781..72a02c0 100644
--- a/arch/arm/boot/dts/sun6i-a31s-cs908.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts
@@ -66,7 +66,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
+ pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
@@ -77,7 +77,7 @@
&ir {
pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
+ pinctrl-0 = <&s_ir_rx_pin>;
status = "okay";
};
@@ -87,7 +87,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts b/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts
index e584e6b..c5e2c55c 100644
--- a/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts
@@ -54,8 +54,6 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
ft5406ee8: touchscreen@38 {
@@ -73,21 +71,21 @@
vref-supply = <®_aldo3>;
status = "okay";
- button@200 {
+ button-200 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <200000>;
};
- button@900 {
+ button-900 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <900000>;
};
- button@1200 {
+ button-1200 {
label = "Back";
linux,code = <KEY_BACK>;
channel = <0>;
diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
index 4cb9664..60b355f 100644
--- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
@@ -90,19 +90,13 @@
&i2c0 {
/* pull-ups and device VDDIO use AXP221 DLDO3 */
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "failed";
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
ctp@5d {
- pinctrl-names = "default";
- pinctrl-0 = <>911_int_primo81>;
compatible = "goodix,gt911";
reg = <0x5d>;
interrupt-parent = <&pio>;
@@ -112,8 +106,6 @@
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
accelerometer@1c {
@@ -131,14 +123,14 @@
vref-supply = <®_aldo3>;
status = "okay";
- button@158 {
+ button-158 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <158730>;
};
- button@349 {
+ button-349 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
@@ -147,8 +139,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>;
vmmc-supply = <®_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
@@ -156,22 +146,11 @@
};
&pio {
- gt911_int_primo81: gt911_int_pin@0 {
- pins = "PA3";
- function = "gpio_in";
- };
-
- mma8452_int_primo81: mma8452_int_pin@0 {
+ mma8452_int_primo81: mma8452-int-pin {
pins = "PA9";
function = "gpio_in";
bias-pull-up;
};
-
- mmc0_cd_pin_primo81: mmc0_cd_pin@0 {
- pins = "PA8";
- function = "gpio_in";
- bias-pull-up;
- };
};
&p2wi {
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
index d7325bc..3099491 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
@@ -135,7 +135,7 @@
/* UART0 pads available on core board */
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
index da0ccf5..4865c32 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
@@ -66,8 +66,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pin_sina31s>;
status {
label = "sina31s:status:usr";
@@ -116,7 +114,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
+ pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-mode = "mii";
phy-supply = <®_dldo1>;
@@ -139,7 +137,7 @@
&ir {
pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
+ pinctrl-0 = <&s_ir_rx_pin>;
status = "okay";
};
@@ -147,14 +145,14 @@
vref-supply = <®_aldo3>;
status = "okay";
- button@158 {
+ button-158 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <158730>;
};
- button@349 {
+ button-349 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
@@ -163,8 +161,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>;
vmmc-supply = <®_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
@@ -175,19 +171,6 @@
status = "okay";
};
-&pio {
- led_pin_sina31s: led_pin@0 {
- pins = "PH13";
- function = "gpio_out";
- };
-
- mmc0_cd_pin_sina31s: mmc0_cd_pin@0 {
- pins = "PA4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
®_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -196,7 +179,7 @@
&spdif {
pinctrl-names = "default";
- pinctrl-0 = <&spdif_pins_a>;
+ pinctrl-0 = <&spdif_tx_pin>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
index b8b79c0..8e724c5 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -58,8 +58,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_bpi_m2>;
blue {
label = "bpi-m2:blue:usr";
@@ -79,8 +77,6 @@
mmc2_pwrseq: mmc2_pwrseq {
compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pwrseq_pin_bpi_m2>;
reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */
};
};
@@ -95,7 +91,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>;
+ pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_dldo1>;
@@ -111,26 +107,20 @@
&ir {
pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
+ pinctrl-0 = <&s_ir_rx_pin>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>;
vmmc-supply = <®_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
status = "okay";
};
-&mmc0_pins_a {
- bias-pull-up;
-};
-
&mmc2 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins_a>;
+ pinctrl-0 = <&mmc2_4bit_pins>;
vmmc-supply = <®_aldo1>;
mmc-pwrseq = <&mmc2_pwrseq>;
bus-width = <4>;
@@ -146,10 +136,6 @@
};
};
-&mmc2_pins_a {
- bias-pull-up;
-};
-
&ohci0 {
status = "okay";
};
@@ -167,31 +153,6 @@
};
};
-&pio {
- gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 {
- pins = "PA21";
- function = "gpio_out";
- };
-
- led_pins_bpi_m2: led_pins@0 {
- pins = "PG5", "PG10", "PG11";
- function = "gpio_out";
- };
-
- mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 {
- pins = "PA4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
-&r_pio {
- mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 {
- pins = "PL8";
- function = "gpio_out";
- };
-};
-
#include "axp22x.dtsi"
®_aldo1 {
@@ -291,7 +252,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
index aab6c17..2504e71 100644
--- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
@@ -62,14 +62,10 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
@@ -89,27 +85,13 @@
status = "okay";
};
-&pio {
- mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 {
- pins = "PA8";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>;
vmmc-supply = <®_vcc3v0>;
bus-width = <4>;
cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
status = "okay";
};
-&mmc0_pins_a {
- bias-pull-up;
-};
-
&p2wi {
status = "okay";
@@ -189,7 +171,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
index 4e72e4f3..86143de2 100644
--- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
@@ -66,7 +66,7 @@
&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
+ pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <®_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
@@ -74,13 +74,7 @@
};
&pio {
- mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
- pins = "PA8";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PA15";
function = "gpio_in";
bias-pull-up;
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
index 763cb03..e2bfe00 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -73,8 +73,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_bpi_m1p>;
green {
label = "bananapi-m1-plus:green:usr";
@@ -90,15 +88,11 @@
mmc3_pwrseq: mmc3_pwrseq {
compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_pwrseq_pin_bpi_m1p>;
reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
};
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_power_pin_bpi_m1p>;
regulator-name = "gmac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -134,7 +128,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
+ pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_3v3>;
@@ -156,8 +150,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -175,13 +167,11 @@
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m1p>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
@@ -191,8 +181,6 @@
&mmc3 {
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_pins_a>;
vmmc-supply = <®_vcc3v3>;
mmc-pwrseq = <&mmc3_pwrseq>;
bus-width = <4>;
@@ -209,11 +197,6 @@
};
};
-&mmc3_pins_a {
- /* AP6210 requires pull-up */
- bias-pull-up;
-};
-
&ohci0 {
status = "okay";
};
@@ -226,29 +209,6 @@
status = "okay";
};
-&pio {
- gmac_power_pin_bpi_m1p: gmac_power_pin@0 {
- pins = "PH23";
- function = "gpio_out";
- };
-
- led_pins_bpi_m1p: led_pins@0 {
- pins = "PH24", "PH25";
- function = "gpio_out";
- };
-
- mmc0_cd_pin_bpi_m1p: mmc0_cd_pin@0 {
- pins = "PH10";
- function = "gpio_in";
- bias-pull-up;
- };
-
- mmc3_pwrseq_pin_bpi_m1p: mmc3_pwrseq_pin@0 {
- pins = "PH22";
- function = "gpio_out";
- };
-};
-
®_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -280,7 +240,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
index 70dfc4a..556b1b5 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -76,8 +76,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_bananapi>;
green {
label = "bananapi:green:usr";
@@ -87,8 +85,6 @@
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_power_pin_bananapi>;
regulator-name = "gmac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -134,7 +130,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
+ pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_3v3>;
@@ -156,8 +152,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -168,20 +162,16 @@
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
@@ -252,27 +242,11 @@
"IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
"", "", "", "", "", "", "", "";
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
-
- mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
- pins = "PH10";
- function = "gpio_in";
- bias-pull-up;
- };
-
- gmac_power_pin_bananapi: gmac_power_pin@0 {
- pins = "PH23";
- function = "gpio_out";
- };
-
- led_pins_bananapi: led_pins@0 {
- pins = "PH24";
- function = "gpio_out";
- };
};
#include "axp209.dtsi"
@@ -316,27 +290,27 @@
&spi0 {
pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins_a>,
- <&spi0_cs0_pins_a>,
- <&spi0_cs1_pins_a>;
+ pinctrl-0 = <&spi0_pi_pins>,
+ <&spi0_cs0_pi_pin>,
+ <&spi0_cs1_pi_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins_b>;
+ pinctrl-0 = <&uart3_ph_pins>;
status = "okay";
};
&uart7 {
pinctrl-names = "default";
- pinctrl-0 = <&uart7_pins_a>;
+ pinctrl-0 = <&uart7_pi_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
index 0898eb6..0176e9d 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
@@ -62,8 +62,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_bananapro>;
blue {
label = "bananapro:blue:usr";
@@ -78,15 +76,11 @@
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
- pinctrl-0 = <&vmmc3_pin_bananapro>;
reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>;
};
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_power_pin_bananapro>;
regulator-name = "gmac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -114,7 +108,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
+ pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_3v3>;
@@ -126,8 +120,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -142,20 +134,16 @@
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
@@ -163,8 +151,6 @@
};
&mmc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_pins_a>;
vmmc-supply = <®_vcc3v3>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
@@ -188,74 +174,39 @@
status = "okay";
};
-&pio {
- gmac_power_pin_bananapro: gmac_power_pin@0 {
- pins = "PH23";
- function = "gpio_out";
- };
-
- led_pins_bananapro: led_pins@0 {
- pins = "PH24", "PG2";
- function = "gpio_out";
- };
-
- mmc0_cd_pin_bananapro: mmc0_cd_pin@0 {
- pins = "PH10";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
- pins = "PH0";
- function = "gpio_out";
- };
-
- usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
- pins = "PH1";
- function = "gpio_out";
- };
-
- vmmc3_pin_bananapro: vmmc3_pin@0 {
- pins = "PH22";
- function = "gpio_out";
- };
-};
-
®_usb1_vbus {
- pinctrl-0 = <&usb1_vbus_pin_bananapro>;
gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
status = "okay";
};
®_usb2_vbus {
- pinctrl-0 = <&usb2_vbus_pin_bananapro>;
gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
status = "okay";
};
&spi0 {
pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins_a>,
- <&spi0_cs0_pins_a>,
- <&spi0_cs1_pins_a>;
+ pinctrl-0 = <&spi0_pi_pins>,
+ <&spi0_cs0_pi_pin>,
+ <&spi0_cs1_pi_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
- pinctrl-0 = <&uart4_pins_b>;
+ pinctrl-0 = <&uart4_ph_pins>;
status = "okay";
};
&uart7 {
pinctrl-names = "default";
- pinctrl-0 = <&uart7_pins_a>;
+ pinctrl-0 = <&uart7_pi_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 942ac9d..200685b 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -74,8 +74,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_cubieboard2>;
blue {
label = "cubieboard2:blue:usr";
@@ -116,7 +114,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
+ pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
@@ -137,8 +135,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -149,20 +145,16 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -182,12 +174,7 @@
};
&pio {
- led_pins_cubieboard2: led_pins@0 {
- pins = "PH20", "PH21";
- function = "gpio_out";
- };
-
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
@@ -239,7 +226,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 5649161..15c5eae 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -74,8 +74,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_cubietruck>;
blue {
label = "cubietruck:blue:usr";
@@ -100,8 +98,6 @@
mmc3_pwrseq: mmc3_pwrseq {
compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_pwrseq_pin_cubietruck>;
reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
};
@@ -151,7 +147,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
+ pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
status = "okay";
@@ -172,8 +168,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -185,25 +179,20 @@
&i2c1 {
pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -211,8 +200,6 @@
};
&mmc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_pins_a>;
vmmc-supply = <®_vcc3v3>;
mmc-pwrseq = <&mmc3_pwrseq>;
bus-width = <4>;
@@ -228,11 +215,6 @@
};
};
-&mmc3_pins_a {
- /* AP6210 requires pull-up */
- bias-pull-up;
-};
-
&ohci0 {
status = "okay";
};
@@ -245,46 +227,13 @@
status = "okay";
};
-&pio {
- ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
- pins = "PH12";
- function = "gpio_out";
- };
-
- led_pins_cubietruck: led_pins@0 {
- pins = "PH7", "PH11", "PH20", "PH21";
- function = "gpio_out";
- };
-
- mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 {
- pins = "PH9";
- function = "gpio_out";
- };
-
- usb0_vbus_pin_a: usb0_vbus_pin@0 {
- pins = "PH17";
- function = "gpio_out";
- };
-
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
- pins = "PH19";
- function = "gpio_in";
- };
-
- usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- pins = "PH22";
- function = "gpio_in";
- };
-};
-
&pwm {
pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
+ pinctrl-0 = <&pwm0_pin>, <&pwm1_pin>;
status = "okay";
};
®_ahci_5v {
- pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -325,7 +274,6 @@
};
®_usb0_vbus {
- pinctrl-0 = <&usb0_vbus_pin_a>;
gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -340,13 +288,13 @@
&spdif {
pinctrl-names = "default";
- pinctrl-0 = <&spdif_tx_pins_a>;
+ pinctrl-0 = <&spdif_tx_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
@@ -360,8 +308,6 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
usb0_vbus_power-supply = <&usb_power_supply>;
diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
index 1f0e5ec..fd0153f6 100644
--- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
+++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
@@ -67,8 +67,6 @@
reg_mmc3_vdd: mmc3_vdd {
compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_vdd_pin_a20_hummingbird>;
regulator-name = "mmc3_vdd";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
@@ -78,8 +76,6 @@
reg_gmac_vdd: gmac_vdd {
compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_vdd_pin_a20_hummingbird>;
regulator-name = "gmac_vdd";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
@@ -103,7 +99,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
+ pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_vdd>;
@@ -120,8 +116,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -135,32 +129,24 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
&i2c3 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_pins_a>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v0>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -168,8 +154,6 @@
};
&mmc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_pins_a>;
vmmc-supply = <®_mmc3_vdd>;
bus-width = <4>;
non-removable;
@@ -184,42 +168,18 @@
status = "okay";
};
-&pio {
- ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 {
- pins = "PH15";
- function = "gpio_out";
- };
-
- usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 {
- pins = "PH2";
- function = "gpio_out";
- };
-
- mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 {
- pins = "PH9";
- function = "gpio_out";
- };
-
- gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 {
- pins = "PH16";
- function = "gpio_out";
- };
-};
-
&pwm {
pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pins_a>;
+ pinctrl-0 = <&pwm0_pin>;
status = "okay";
};
®_ahci_5v {
- pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>;
gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
status = "okay";
};
®_usb1_vbus {
- pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>;
gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
status = "okay";
};
@@ -230,38 +190,38 @@
&spi2 {
pinctrl-names = "default";
- pinctrl-0 = <&spi2_pins_b>,
- <&spi2_cs0_pins_b>;
+ pinctrl-0 = <&spi2_pb_pins>,
+ <&spi2_cs0_pb_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins_a>;
+ pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins_a>;
+ pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
- pinctrl-0 = <&uart4_pins_a>;
+ pinctrl-0 = <&uart4_pg_pins>;
status = "okay";
};
&uart5 {
pinctrl-names = "default";
- pinctrl-0 = <&uart5_pins_a>;
+ pinctrl-0 = <&uart5_pi_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
index 2e3f2f2..5f1c4f5 100644
--- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
@@ -61,8 +61,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_i12_tvbox>;
red {
label = "i12_tvbox:red:usr";
@@ -77,8 +75,6 @@
reg_vmmc3: vmmc3 {
compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&vmmc3_pin_i12_tvbox>;
regulator-name = "vmmc3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -88,8 +84,6 @@
reg_vmmc3_io: vmmc3-io {
compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&vmmc3_io_pin_i12_tvbox>;
regulator-name = "vmmc3-io";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -101,8 +95,6 @@
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_power_pin_i12_tvbox>;
regulator-name = "gmac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -122,7 +114,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
+ pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-mode = "mii";
phy-supply = <®_gmac_3v3>;
@@ -134,8 +126,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -151,13 +141,11 @@
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -165,8 +153,6 @@
};
&mmc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_pins_a>;
vmmc-supply = <®_vmmc3>;
bus-width = <4>;
non-removable;
@@ -181,11 +167,6 @@
};
};
-&mmc3_pins_a {
- /* AP6210 / AP6330 requires pull-up */
- bias-pull-up;
-};
-
&ohci0 {
status = "okay";
};
@@ -194,28 +175,6 @@
status = "okay";
};
-&pio {
- vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
- pins = "PH2";
- function = "gpio_out";
- };
-
- vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
- pins = "PH12";
- function = "gpio_out";
- };
-
- gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
- pins = "PH21";
- function = "gpio_out";
- };
-
- led_pins_i12_tvbox: led_pins@0 {
- pins = "PH9", "PH20";
- function = "gpio_out";
- };
-};
-
®_usb1_vbus {
status = "okay";
};
@@ -226,7 +185,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
index 926fa19..9494947 100644
--- a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
+++ b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
@@ -74,7 +74,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
+ pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
@@ -85,8 +85,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -97,14 +95,10 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 8 5 GPIO_ACTIVE_LOW>; /* PI5 */
@@ -156,7 +150,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
index 1b05ba4..b90a760 100644
--- a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
+++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
@@ -96,7 +96,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
+ pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
@@ -115,13 +115,11 @@
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -129,7 +127,7 @@
};
&pio {
- led_pins_itead_core: led_pins@0 {
+ led_pins_itead_core: led-pins {
pins = "PH20","PH21";
function = "gpio_out";
drive-strength = <20>;
@@ -142,6 +140,6 @@
&spdif {
pinctrl-names = "default";
- pinctrl-0 = <&spdif_tx_pins_a>;
+ pinctrl-0 = <&spdif_tx_pin>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
index b1ab7c1..f91e1be 100644
--- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
@@ -74,8 +74,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_lamobo_r1>;
green {
label = "lamobo_r1:green:usr";
@@ -85,8 +83,6 @@
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_power_pin_lamobo_r1>;
regulator-name = "gmac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -123,10 +119,12 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
+ pinctrl-0 = <&gmac_rgmii_pins>;
phy-mode = "rgmii";
phy-supply = <®_gmac_3v3>;
status = "okay";
+ /delete-property/#address-cells;
+ /delete-property/#size-cells;
fixed-link {
speed = <1000>;
@@ -141,8 +139,6 @@
switch: ethernet-switch@1e {
compatible = "brcm,bcm53125";
reg = <30>;
- #address-cells = <1>;
- #size-cells = <0>;
ports {
#address-cells = <1>;
@@ -199,8 +195,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -211,20 +205,16 @@
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
@@ -240,27 +230,11 @@
};
&pio {
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
-
- mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 {
- pins = "PH10";
- function = "gpio_in";
- bias-pull-up;
- };
-
- gmac_power_pin_lamobo_r1: gmac_power_pin@0 {
- pins = "PH23";
- function = "gpio_out";
- };
-
- led_pins_lamobo_r1: led_pins@0 {
- pins = "PH24";
- function = "gpio_out";
- };
};
#include "axp209.dtsi"
@@ -314,27 +288,27 @@
&spi0 {
pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins_a>,
- <&spi0_cs0_pins_a>,
- <&spi0_cs1_pins_a>;
+ pinctrl-0 = <&spi0_pi_pins>,
+ <&spi0_cs0_pi_pin>,
+ <&spi0_cs1_pi_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins_b>;
+ pinctrl-0 = <&uart3_ph_pins>;
status = "okay";
};
&uart7 {
pinctrl-names = "default";
- pinctrl-0 = <&uart7_pins_a>;
+ pinctrl-0 = <&uart7_pi_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts
index e91a209..b8a1aaa 100644
--- a/arch/arm/boot/dts/sun7i-a20-m3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-m3.dts
@@ -63,8 +63,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_m3>;
blue {
label = "m3:blue:usr";
@@ -83,7 +81,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
+ pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
@@ -94,8 +92,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -111,13 +107,11 @@
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -125,8 +119,6 @@
};
&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
non-removable;
@@ -141,13 +133,6 @@
status = "okay";
};
-&pio {
- led_pins_m3: led_pins@0 {
- pins = "PH20";
- function = "gpio_out";
- };
-};
-
®_usb1_vbus {
status = "okay";
};
@@ -158,7 +143,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts
index 6109f79..1491c60 100644
--- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts
+++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts
@@ -106,8 +106,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -121,20 +119,14 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v0>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -153,18 +145,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
- pins = "PH4";
- function = "gpio_in";
- };
-
- usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- pins = "PH5";
- function = "gpio_in";
- };
-};
-
®_usb0_vbus {
status = "okay";
};
@@ -179,13 +159,13 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins_a>;
+ pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
status = "okay";
};
@@ -195,8 +175,6 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
usb0_vbus-supply = <®_usb0_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts
index 81ebc97..20bf09b 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts
@@ -21,8 +21,6 @@
};
&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins_a>;
vmmc-supply = <®_vcc3v3>;
mmc-pwrseq = <&mmc2_pwrseq>;
bus-width = <4>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
index f080f82..f0e6a96 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
@@ -74,8 +74,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_olimex_som_evb>;
green {
label = "a20-olimex-som-evb:green:usr";
@@ -112,7 +110,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
+ pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
status = "okay";
@@ -133,8 +131,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -145,14 +141,10 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
@@ -160,49 +152,49 @@
vref-supply = <®_vcc3v0>;
status = "okay";
- button@190 {
+ button-190 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <190000>;
};
- button@390 {
+ button-390 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <390000>;
};
- button@600 {
+ button-600 {
label = "Menu";
linux,code = <KEY_MENU>;
channel = <0>;
voltage = <600000>;
};
- button@800 {
+ button-800 {
label = "Search";
linux,code = <KEY_SEARCH>;
channel = <0>;
voltage = <800000>;
};
- button@980 {
+ button-980 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
voltage = <980000>;
};
- button@1180 {
+ button-1180 {
label = "Esc";
linux,code = <KEY_ESC>;
channel = <0>;
voltage = <1180000>;
};
- button@1400 {
+ button-1400 {
label = "Enter";
linux,code = <KEY_ENTER>;
channel = <0>;
@@ -211,8 +203,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -220,8 +210,6 @@
};
&mmc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olimex_som_evb>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 0 GPIO_ACTIVE_LOW>; /* PH0 */
@@ -241,36 +229,14 @@
};
&pio {
- ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 {
- pins = "PC3";
- function = "gpio_out";
- };
-
- led_pins_olimex_som_evb: led_pins@0 {
+ led_pins_olimex_som_evb: led-pins {
pins = "PH2";
function = "gpio_out";
drive-strength = <20>;
};
-
- mmc3_cd_pin_olimex_som_evb: mmc3_cd_pin@0 {
- pins = "PH0";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
- pins = "PH4";
- function = "gpio_in";
- };
-
- usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- pins = "PH5";
- function = "gpio_in";
- };
};
®_ahci_5v {
- pinctrl-0 = <&ahci_pwr_pin_olimex_som_evb>;
gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -316,33 +282,33 @@
&spi1 {
pinctrl-names = "default";
- pinctrl-0 = <&spi1_pins_a>,
- <&spi1_cs0_pins_a>;
+ pinctrl-0 = <&spi1_pi_pins>,
+ <&spi1_cs0_pi_pin>;
status = "okay";
};
&spi2 {
pinctrl-names = "default";
- pinctrl-0 = <&spi2_pins_a>,
- <&spi2_cs0_pins_a>;
+ pinctrl-0 = <&spi2_pc_pins>,
+ <&spi2_cs0_pc_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart6 {
pinctrl-names = "default";
- pinctrl-0 = <&uart6_pins_a>;
+ pinctrl-0 = <&uart6_pi_pins>;
status = "okay";
};
&uart7 {
pinctrl-names = "default";
- pinctrl-0 = <&uart7_pins_a>;
+ pinctrl-0 = <&uart7_pi_pins>;
status = "okay";
};
@@ -352,8 +318,6 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */
usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH05 */
usb0_vbus-supply = <®_usb0_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts
index c56620a..a59755a 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts
@@ -20,8 +20,6 @@
};
&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins_a>;
vmmc-supply = <®_vcc3v3>;
mmc-pwrseq = <&mmc2_pwrseq>;
bus-width = <4>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
index 3d7b5c8..823aabc 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
@@ -78,7 +78,7 @@
&can0 {
pinctrl-names = "default";
- pinctrl-0 = <&can0_pins_a>;
+ pinctrl-0 = <&can_ph_pins>;
status = "okay";
};
@@ -104,7 +104,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
+ pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy3>;
phy-mode = "rgmii";
phy-supply = <®_vcc3v3>;
@@ -130,8 +130,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -143,8 +141,6 @@
/* Exposed to UEXT1 */
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
eeprom: eeprom@50 {
@@ -156,20 +152,16 @@
/* Exposed to UEXT2 */
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>;
@@ -177,8 +169,6 @@
};
&mmc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_pins_a>;
vmmc-supply = <®_vcc3v3>;
mmc-pwrseq = <&rtl_pwrseq>;
bus-width = <4>;
@@ -203,8 +193,8 @@
};
&pio {
- bt_uart_pins: bt_uart_pins@0 {
- pins = "PG6", "PG7", "PG8";
+ uart3_rts_pin: uart3-rts-pin {
+ pins = "PG8";
function = "uart3";
};
};
@@ -274,43 +264,43 @@
/* Exposed to UEXT1 */
&spi1 {
pinctrl-names = "default";
- pinctrl-0 = <&spi1_pins_a>,
- <&spi1_cs0_pins_a>;
+ pinctrl-0 = <&spi1_pi_pins>,
+ <&spi1_cs0_pi_pin>;
status = "okay";
};
/* Exposed to UEXT2 */
&spi2 {
pinctrl-names = "default";
- pinctrl-0 = <&spi2_pins_a>,
- <&spi2_cs0_pins_a>;
+ pinctrl-0 = <&spi2_pc_pins>,
+ <&spi2_cs0_pc_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
/* Used for RTL8723BS bluetooth */
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&bt_uart_pins>;
+ pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_pin>;
status = "okay";
};
/* Exposed to UEXT1 */
&uart4 {
pinctrl-names = "default";
- pinctrl-0 = <&uart4_pins_a>;
+ pinctrl-0 = <&uart4_pg_pins>;
status = "okay";
};
/* Exposed to UEXT2 */
&uart7 {
pinctrl-names = "default";
- pinctrl-0 = <&uart7_pins_a>;
+ pinctrl-0 = <&uart7_pi_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
index d20fd03..5e41119 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
@@ -105,7 +105,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
+ pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
@@ -126,8 +126,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -142,8 +140,6 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
eeprom: eeprom@50 {
@@ -154,8 +150,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -175,24 +169,19 @@
};
&pio {
- ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
- pins = "PC3";
- function = "gpio_out";
- };
-
- led_pins_olinuxinolime: led_pins@0 {
+ led_pins_olinuxinolime: led-pins {
pins = "PH2";
function = "gpio_out";
drive-strength = <20>;
};
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
- usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
@@ -200,7 +189,6 @@
};
®_ahci_5v {
- pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -219,7 +207,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
index 81f376f..decb014a 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
@@ -48,23 +48,12 @@
compatible = "olimex,a20-olinuxino-lime2-emmc", "allwinner,sun7i-a20";
mmc2_pwrseq: pwrseq {
- pinctrl-0 = <&mmc2_pins_nrst>;
- pinctrl-names = "default";
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
};
};
-&pio {
- mmc2_pins_nrst: mmc2-rst-pin {
- pins = "PC16";
- function = "gpio_out";
- };
-};
-
&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins_a>;
vmmc-supply = <®_vcc3v3>;
vqmmc-supply = <®_vcc3v3>;
bus-width = <4>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index b828677..55c9086 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -110,7 +110,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
+ pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
status = "okay";
@@ -131,8 +131,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -143,8 +141,6 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
eeprom: eeprom@50 {
@@ -154,9 +150,11 @@
};
};
+&lradc {
+ vref-supply = <®_vcc3v0>;
+};
+
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -176,37 +174,26 @@
};
&pio {
- ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
- pins = "PC3";
- function = "gpio_out";
- };
-
- led_pins_olinuxinolime: led_pins@0 {
+ led_pins_olinuxinolime: led-pins {
pins = "PH2";
function = "gpio_out";
drive-strength = <20>;
};
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
- usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
};
-
- usb0_vbus_pin_lime2: usb0_vbus_pin@0 {
- pins = "PC17";
- function = "gpio_out";
- };
};
®_ahci_5v {
- pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -254,7 +241,6 @@
};
®_usb0_vbus {
- pinctrl-0 = <&usb0_vbus_pin_lime2>;
gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -269,7 +255,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts
index d99e7b1..2337b44 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts
@@ -54,8 +54,6 @@
};
&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
non-removable;
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index 866d230..840ae11 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -117,7 +117,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>, <&gmac_txerr>;
+ pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
@@ -138,8 +138,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -150,8 +148,6 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
eeprom: eeprom@50 {
@@ -162,8 +158,6 @@
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
@@ -171,49 +165,49 @@
vref-supply = <®_vcc3v0>;
status = "okay";
- button@191 {
+ button-191 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <191274>;
};
- button@392 {
+ button-392 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <392644>;
};
- button@601 {
+ button-601 {
label = "Menu";
linux,code = <KEY_MENU>;
channel = <0>;
voltage = <601151>;
};
- button@795 {
+ button-795 {
label = "Search";
linux,code = <KEY_SEARCH>;
channel = <0>;
voltage = <795090>;
};
- button@987 {
+ button-987 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
voltage = <987387>;
};
- button@1184 {
+ button-1184 {
label = "Esc";
linux,code = <KEY_ESC>;
channel = <0>;
voltage = <1184678>;
};
- button@1398 {
+ button-1398 {
label = "Enter";
linux,code = <KEY_ENTER>;
channel = <0>;
@@ -222,8 +216,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -231,8 +223,6 @@
};
&mmc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
@@ -252,30 +242,24 @@
};
&pio {
- gmac_txerr: gmac_txerr@0 {
+ gmac_txerr: gmac-txerr-pin {
pins = "PA17";
function = "gmac";
};
- mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
- pins = "PH11";
- function = "gpio_in";
- bias-pull-up;
- };
-
- led_pins_olinuxino: led_pins@0 {
+ led_pins_olinuxino: led-pins {
pins = "PH2";
function = "gpio_out";
drive-strength = <20>;
};
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
- usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
@@ -331,33 +315,33 @@
&spi1 {
pinctrl-names = "default";
- pinctrl-0 = <&spi1_pins_a>,
- <&spi1_cs0_pins_a>;
+ pinctrl-0 = <&spi1_pi_pins>,
+ <&spi1_cs0_pi_pin>;
status = "okay";
};
&spi2 {
pinctrl-names = "default";
- pinctrl-0 = <&spi2_pins_a>,
- <&spi2_cs0_pins_a>;
+ pinctrl-0 = <&spi2_pc_pins>,
+ <&spi2_cs0_pc_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart6 {
pinctrl-names = "default";
- pinctrl-0 = <&uart6_pins_a>;
+ pinctrl-0 = <&uart6_pi_pins>;
status = "okay";
};
&uart7 {
pinctrl-names = "default";
- pinctrl-0 = <&uart7_pins_a>;
+ pinctrl-0 = <&uart7_pi_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
index f5c7178..1588108 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
@@ -74,8 +74,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_orangepi>;
green {
label = "orangepi:green:usr";
@@ -90,8 +88,6 @@
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_power_pin_orangepi>;
regulator-name = "gmac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -123,7 +119,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
+ pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_3v3>;
@@ -145,8 +141,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -160,13 +154,11 @@
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
@@ -174,8 +166,6 @@
};
&mmc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_orangepi>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
@@ -187,43 +177,11 @@
};
&pio {
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
-
- mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
- pins = "PH10";
- function = "gpio_in";
- bias-pull-up;
- };
-
- mmc3_cd_pin_orangepi: mmc3_cd_pin@0 {
- pins = "PH11";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
- pins = "PH22";
- function = "gpio_out";
- };
-
- gmac_power_pin_orangepi: gmac_power_pin@0 {
- pins = "PH23";
- function = "gpio_out";
- };
-
- led_pins_orangepi: led_pins@0 {
- pins = "PH24", "PH25";
- function = "gpio_out";
- };
-
- usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
- pins = "PH26";
- function = "gpio_out";
- };
};
®_dcdc2 {
@@ -256,20 +214,18 @@
};
®_usb1_vbus {
- pinctrl-0 = <&usb1_vbus_pin_bananapro>;
gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
status = "okay";
};
®_usb2_vbus {
- pinctrl-0 = <&usb2_vbus_pin_bananapro>;
gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
index 7a4244e..d64de2e 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
@@ -63,8 +63,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_orangepi>;
green {
label = "orangepi:green:usr";
@@ -74,8 +72,6 @@
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_power_pin_orangepi>;
regulator-name = "gmac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -99,7 +95,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
+ pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_3v3>;
@@ -111,8 +107,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -126,13 +120,11 @@
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
@@ -144,37 +136,11 @@
};
&pio {
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
-
- mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
- pins = "PH10";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
- pins = "PH22";
- function = "gpio_out";
- };
-
- gmac_power_pin_orangepi: gmac_power_pin@0 {
- pins = "PH23";
- function = "gpio_out";
- };
-
- led_pins_orangepi: led_pins@0 {
- pins = "PH24";
- function = "gpio_out";
- };
-
- usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
- pins = "PH26";
- function = "gpio_out";
- };
};
®_dcdc2 {
@@ -207,20 +173,18 @@
};
®_usb1_vbus {
- pinctrl-0 = <&usb1_vbus_pin_bananapro>;
gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
status = "okay";
};
®_usb2_vbus {
- pinctrl-0 = <&usb2_vbus_pin_bananapro>;
gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
index bfca960..538ea15 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
@@ -71,8 +71,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_pcduino3_nano>;
/* Marked "LED3" on the PCB. */
usr1 {
@@ -115,7 +113,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
+ pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
status = "okay";
@@ -136,8 +134,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -149,13 +145,11 @@
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -175,30 +169,14 @@
};
&pio {
- ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 {
- pins = "PH2";
- function = "gpio_out";
- };
-
- led_pins_pcduino3_nano: led_pins@0 {
- pins = "PH16", "PH15";
- function = "gpio_out";
- };
-
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
-
- usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 {
- pins = "PD2";
- function = "gpio_out";
- };
};
®_ahci_5v {
- pinctrl-0 = <&ahci_pwr_pin_pcduino3_nano>;
gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
status = "okay";
};
@@ -232,14 +210,13 @@
/* A single regulator (U24) powers both USB host ports. */
®_usb1_vbus {
- pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
index c576f10..a72ed43 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
@@ -63,8 +63,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_pcduino3>;
tx {
label = "pcduino3:green:tx";
@@ -77,23 +75,22 @@
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&key_pins_pcduino3>;
- #address-cells = <1>;
- #size-cells = <0>;
- button@0 {
+
+ back {
label = "Key Back";
linux,code = <KEY_BACK>;
gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
};
- button@1 {
+
+ home {
label = "Key Home";
linux,code = <KEY_HOME>;
gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
};
- button@2 {
+
+ menu {
label = "Key Menu";
linux,code = <KEY_MENU>;
gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
@@ -124,7 +121,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
+ pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
@@ -135,8 +132,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -150,13 +145,11 @@
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -176,17 +169,7 @@
};
&pio {
- led_pins_pcduino3: led_pins@0 {
- pins = "PH15", "PH16";
- function = "gpio_out";
- };
-
- key_pins_pcduino3: key_pins@0 {
- pins = "PH17", "PH18", "PH19";
- function = "gpio_in";
- };
-
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
@@ -233,7 +216,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
index 8202c87..ffade25 100644
--- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
+++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
@@ -63,8 +63,6 @@
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
- pinctrl-names = "default";
- pinctrl-0 = <&bl_enable_pin>;
enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
};
@@ -74,8 +72,6 @@
};
&codec {
- pinctrl-names = "default";
- pinctrl-0 = <&codec_pa_pin>;
allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
status = "okay";
};
@@ -93,8 +89,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -107,14 +101,10 @@
#include "axp209.dtsi"
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
gt911: touchscreen@5d {
@@ -122,8 +112,6 @@
reg = <0x5d>;
interrupt-parent = <&pio>;
interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
- pinctrl-names = "default";
- pinctrl-0 = <&ts_reset_pin>;
irq-gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* INT (PH21) */
reset-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* RST (PB13) */
touchscreen-swapped-x-y;
@@ -134,14 +122,14 @@
vref-supply = <®_vcc3v0>;
status = "okay";
- button@571 {
+ button-571 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <571428>;
};
- button@761 {
+ button-761 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
@@ -150,8 +138,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -171,22 +157,7 @@
};
&pio {
- bl_enable_pin: bl_enable_pin@0 {
- pins = "PH7";
- function = "gpio_out";
- };
-
- codec_pa_pin: codec_pa_pin@0 {
- pins = "PH15";
- function = "gpio_out";
- };
-
- ts_reset_pin: ts_reset_pin@0 {
- pins = "PB13";
- function = "gpio_out";
- };
-
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
@@ -195,7 +166,7 @@
&pwm {
pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pins_a>;
+ pinctrl-0 = <&pwm0_pin>;
status = "okay";
};
@@ -238,7 +209,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
index ff5c108..c27e560 100644
--- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
+++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
@@ -62,8 +62,6 @@
mmc3_pwrseq: mmc3_pwrseq {
compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
- pinctrl-0 = <&vmmc3_pin_ap6xxx_wl_regon>;
reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
};
};
@@ -82,7 +80,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
+ pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
status = "okay";
@@ -93,8 +91,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -105,22 +101,16 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
#include "axp209.dtsi"
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -128,8 +118,6 @@
};
&mmc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_pins_a>;
vmmc-supply = <®_vcc3v3>;
mmc-pwrseq = <&mmc3_pwrseq>;
bus-width = <4>;
@@ -158,12 +146,7 @@
};
&pio {
- vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 {
- pins = "PH9";
- function = "gpio_out";
- };
-
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
@@ -209,7 +192,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 02e40da..641a8fa 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -42,8 +42,6 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton.dtsi"
-
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/dma/sun4i-a10.h>
@@ -52,6 +50,8 @@
/ {
interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
aliases {
ethernet0 = &gmac;
@@ -62,7 +62,7 @@
#size-cells = <1>;
ranges;
- framebuffer@0 {
+ framebuffer-lcd0-hdmi {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
@@ -73,7 +73,7 @@
status = "disabled";
};
- framebuffer@1 {
+ framebuffer-lcd0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
@@ -83,7 +83,7 @@
status = "disabled";
};
- framebuffer@2 {
+ framebuffer-lcd0-tve0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-tve0";
@@ -118,7 +118,7 @@
#cooling-cells = <2>;
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
@@ -148,7 +148,8 @@
cooling-maps {
map0 {
trip = <&cpu_alert0>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
@@ -170,17 +171,13 @@
};
};
- memory {
- reg = <0x40000000 0x80000000>;
- };
-
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
- cma_pool: cma@4a000000 {
+ default-pool {
compatible = "shared-dma-pool";
size = <0x6000000>;
alloc-ranges = <0x4a000000 0x6000000>;
@@ -198,7 +195,7 @@
};
pmu {
- compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
+ compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -208,14 +205,14 @@
#size-cells = <1>;
ranges;
- osc24M: clk@1c20050 {
+ osc24M: clk-24M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
- osc32k: clk@0 {
+ osc32k: clk-32k {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
@@ -231,14 +228,14 @@
* The actual TX clock rate is not controlled by the
* gmac_tx clock.
*/
- mii_phy_tx_clk: clk@1 {
+ mii_phy_tx_clk: clk-mii-phy-tx {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
clock-output-names = "mii_phy_tx";
};
- gmac_int_tx_clk: clk@2 {
+ gmac_int_tx_clk: clk-gmac-int-tx {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <125000000>;
@@ -261,7 +258,7 @@
status = "disabled";
};
- soc@1c00000 {
+ soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -517,6 +514,8 @@
"output",
"sample";
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -551,6 +550,8 @@
"output",
"sample";
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -568,6 +569,8 @@
"output",
"sample";
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -665,8 +668,6 @@
};
hdmi_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
};
};
@@ -750,22 +751,22 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
- can0_pins_a: can0@0 {
+ can_ph_pins: can-ph-pins {
pins = "PH20", "PH21";
function = "can";
};
- clk_out_a_pins_a: clk_out_a@0 {
+ clk_out_a_pin: clk-out-a-pin {
pins = "PI12";
function = "clk_out_a";
};
- clk_out_b_pins_a: clk_out_b@0 {
+ clk_out_b_pin: clk-out-b-pin {
pins = "PI13";
function = "clk_out_b";
};
- emac_pins_a: emac0@0 {
+ emac_pa_pins: emac-pa-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
"PA7", "PA8", "PA9", "PA10",
@@ -774,7 +775,7 @@
function = "emac";
};
- gmac_pins_mii_a: gmac_mii@0 {
+ gmac_mii_pins: gmac-mii-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
"PA7", "PA8", "PA9", "PA10",
@@ -783,7 +784,7 @@
function = "gmac";
};
- gmac_pins_rgmii_a: gmac_rgmii@0 {
+ gmac_rgmii_pins: gmac-rgmii-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
"PA7", "PA8", "PA10",
@@ -797,47 +798,47 @@
drive-strength = <40>;
};
- i2c0_pins_a: i2c0@0 {
+ i2c0_pins: i2c0-pins {
pins = "PB0", "PB1";
function = "i2c0";
};
- i2c1_pins_a: i2c1@0 {
+ i2c1_pins: i2c1-pins {
pins = "PB18", "PB19";
function = "i2c1";
};
- i2c2_pins_a: i2c2@0 {
+ i2c2_pins: i2c2-pins {
pins = "PB20", "PB21";
function = "i2c2";
};
- i2c3_pins_a: i2c3@0 {
+ i2c3_pins: i2c3-pins {
pins = "PI0", "PI1";
function = "i2c3";
};
- ir0_rx_pins_a: ir0@0 {
+ ir0_rx_pin: ir0-rx-pin {
pins = "PB4";
function = "ir0";
};
- ir0_tx_pins_a: ir0@1 {
+ ir0_tx_pin: ir0-tx-pin {
pins = "PB3";
function = "ir0";
};
- ir1_rx_pins_a: ir1@0 {
+ ir1_rx_pin: ir1-rx-pin {
pins = "PB23";
function = "ir1";
};
- ir1_tx_pins_a: ir1@1 {
+ ir1_tx_pin: ir1-tx-pin {
pins = "PB22";
function = "ir1";
};
- mmc0_pins_a: mmc0@0 {
+ mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
function = "mmc0";
@@ -845,7 +846,7 @@
bias-pull-up;
};
- mmc2_pins_a: mmc2@0 {
+ mmc2_pins: mmc2-pins {
pins = "PC6", "PC7", "PC8",
"PC9", "PC10", "PC11";
function = "mmc2";
@@ -853,7 +854,7 @@
bias-pull-up;
};
- mmc3_pins_a: mmc3@0 {
+ mmc3_pins: mmc3-pins {
pins = "PI4", "PI5", "PI6",
"PI7", "PI8", "PI9";
function = "mmc3";
@@ -861,118 +862,128 @@
bias-pull-up;
};
- ps20_pins_a: ps20@0 {
+ ps2_0_pins: ps2-0-pins {
pins = "PI20", "PI21";
function = "ps2";
};
- ps21_pins_a: ps21@0 {
+ ps2_1_ph_pins: ps2-1-ph-pins {
pins = "PH12", "PH13";
function = "ps2";
};
- pwm0_pins_a: pwm0@0 {
+ pwm0_pin: pwm0-pin {
pins = "PB2";
function = "pwm";
};
- pwm1_pins_a: pwm1@0 {
+ pwm1_pin: pwm1-pin {
pins = "PI3";
function = "pwm";
};
- spdif_tx_pins_a: spdif@0 {
+ spdif_tx_pin: spdif-tx-pin {
pins = "PB13";
function = "spdif";
bias-pull-up;
};
- spi0_pins_a: spi0@0 {
+ spi0_pi_pins: spi0-pi-pins {
pins = "PI11", "PI12", "PI13";
function = "spi0";
};
- spi0_cs0_pins_a: spi0_cs0@0 {
+ spi0_cs0_pi_pin: spi0-cs0-pi-pin {
pins = "PI10";
function = "spi0";
};
- spi0_cs1_pins_a: spi0_cs1@0 {
+ spi0_cs1_pi_pin: spi0-cs1-pi-pin {
pins = "PI14";
function = "spi0";
};
- spi1_pins_a: spi1@0 {
+ spi1_pi_pins: spi1-pi-pins {
pins = "PI17", "PI18", "PI19";
function = "spi1";
};
- spi1_cs0_pins_a: spi1_cs0@0 {
+ spi1_cs0_pi_pin: spi1-cs0-pi-pin {
pins = "PI16";
function = "spi1";
};
- spi2_pins_a: spi2@0 {
- pins = "PC20", "PC21", "PC22";
- function = "spi2";
- };
-
- spi2_pins_b: spi2@1 {
+ spi2_pb_pins: spi2-pb-pins {
pins = "PB15", "PB16", "PB17";
function = "spi2";
};
- spi2_cs0_pins_a: spi2_cs0@0 {
- pins = "PC19";
- function = "spi2";
- };
-
- spi2_cs0_pins_b: spi2_cs0@1 {
+ spi2_cs0_pb_pin: spi2-cs0-pb-pin {
pins = "PB14";
function = "spi2";
};
- uart0_pins_a: uart0@0 {
+ spi2_pc_pins: spi2-pc-pins {
+ pins = "PC20", "PC21", "PC22";
+ function = "spi2";
+ };
+
+ spi2_cs0_pc_pin: spi2-cs0-pc-pin {
+ pins = "PC19";
+ function = "spi2";
+ };
+
+ uart0_pb_pins: uart0-pb-pins {
pins = "PB22", "PB23";
function = "uart0";
};
- uart2_pins_a: uart2@0 {
- pins = "PI16", "PI17", "PI18", "PI19";
+ uart2_pi_pins: uart2-pi-pins {
+ pins = "PI18", "PI19";
function = "uart2";
};
- uart3_pins_a: uart3@0 {
- pins = "PG6", "PG7", "PG8", "PG9";
+ uart2_cts_rts_pi_pins: uart2-cts-rts-pi-pins {
+ pins = "PI16", "PI17";
+ function = "uart2";
+ };
+
+ uart3_pg_pins: uart3-pg-pins {
+ pins = "PG6", "PG7";
function = "uart3";
};
- uart3_pins_b: uart3@1 {
+ uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins {
+ pins = "PG8", "PG9";
+ function = "uart3";
+ };
+
+ uart3_ph_pins: uart3-ph-pins {
pins = "PH0", "PH1";
function = "uart3";
};
- uart4_pins_a: uart4@0 {
+ uart4_pg_pins: uart4-pg-pins {
pins = "PG10", "PG11";
function = "uart4";
};
- uart4_pins_b: uart4@1 {
+ uart4_ph_pins: uart4-ph-pins {
pins = "PH4", "PH5";
function = "uart4";
};
- uart5_pins_a: uart5@0 {
+ uart5_pi_pins: uart5-pi-pins {
pins = "PI10", "PI11";
function = "uart5";
};
- uart6_pins_a: uart6@0 {
+ uart6_pi_pins: uart6-pi-pins {
pins = "PI12", "PI13";
function = "uart6";
};
- uart7_pins_a: uart7@0 {
+ uart7_pi_pins: uart7-pi-pins {
pins = "PI20", "PI21";
function = "uart7";
};
@@ -1213,6 +1224,8 @@
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB1_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1224,6 +1237,8 @@
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB1_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1235,6 +1250,8 @@
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB1_I2C2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1246,6 +1263,8 @@
reg = <0x01c2b800 0x400>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB1_I2C3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index c16ffcc..a9c123d 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -42,8 +42,6 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton.dtsi"
-
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
@@ -51,13 +49,15 @@
/ {
interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
chosen {
#address-cells = <1>;
#size-cells = <1>;
ranges;
- simplefb_lcd: framebuffer@0 {
+ simplefb_lcd: framebuffer-lcd0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
@@ -118,7 +118,7 @@
};
};
- soc@1c00000 {
+ soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -169,6 +169,8 @@
resets = <&ccu RST_BUS_MMC0>;
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -298,22 +300,30 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
- uart0_pins_a: uart0@0 {
- pins = "PF2", "PF4";
- function = "uart0";
+ i2c0_pins: i2c0-pins {
+ pins = "PH2", "PH3";
+ function = "i2c0";
};
- uart1_pins_a: uart1@0 {
- pins = "PG6", "PG7";
- function = "uart1";
+ i2c1_pins: i2c1-pins {
+ pins = "PH4", "PH5";
+ function = "i2c1";
};
- uart1_pins_cts_rts_a: uart1-cts-rts@0 {
- pins = "PG8", "PG9";
- function = "uart1";
+ i2c2_pins: i2c2-pins {
+ pins = "PE12", "PE13";
+ function = "i2c2";
};
- mmc0_pins_a: mmc0@0 {
+ lcd_rgb666_pins: lcd-rgb666-pins {
+ pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+ "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+ "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+ "PD24", "PD25", "PD26", "PD27";
+ function = "lcd0";
+ };
+
+ mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
function = "mmc0";
@@ -321,7 +331,7 @@
bias-pull-up;
};
- mmc1_pins_a: mmc1@0 {
+ mmc1_pg_pins: mmc1-pg-pins {
pins = "PG0", "PG1", "PG2",
"PG3", "PG4", "PG5";
function = "mmc1";
@@ -329,7 +339,7 @@
bias-pull-up;
};
- mmc2_8bit_pins: mmc2_8bit {
+ mmc2_8bit_pins: mmc2-8bit-pins {
pins = "PC5", "PC6", "PC8",
"PC9", "PC10", "PC11",
"PC12", "PC13", "PC14",
@@ -370,32 +380,24 @@
bias-pull-up;
};
- pwm0_pins: pwm0 {
+ pwm0_pin: pwm0-pin {
pins = "PH0";
function = "pwm0";
};
- i2c0_pins_a: i2c0@0 {
- pins = "PH2", "PH3";
- function = "i2c0";
+ uart0_pf_pins: uart0-pf-pins {
+ pins = "PF2", "PF4";
+ function = "uart0";
};
- i2c1_pins_a: i2c1@0 {
- pins = "PH4", "PH5";
- function = "i2c1";
+ uart1_pg_pins: uart1-pg-pins {
+ pins = "PG6", "PG7";
+ function = "uart1";
};
- i2c2_pins_a: i2c2@0 {
- pins = "PE12", "PE13";
- function = "i2c2";
- };
-
- lcd_rgb666_pins: lcd-rgb666@0 {
- pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
- "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
- "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
- "PD24", "PD25", "PD26", "PD27";
- function = "lcd0";
+ uart1_cts_rts_pg_pins: uart1-cts-rts-pg-pins {
+ pins = "PG8", "PG9";
+ function = "uart1";
};
};
@@ -499,6 +501,8 @@
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C0>;
resets = <&ccu RST_BUS_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -510,6 +514,8 @@
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C1>;
resets = <&ccu RST_BUS_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -521,6 +527,8 @@
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C2>;
resets = <&ccu RST_BUS_I2C2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -565,11 +573,11 @@
};
rtc: rtc@1f00000 {
- compatible = "allwinner,sun6i-a31-rtc";
- reg = <0x01f00000 0x54>;
+ compatible = "allwinner,sun8i-a23-rtc";
+ reg = <0x01f00000 0x400>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- clock-output-names = "osc32k";
+ clock-output-names = "osc32k", "osc32k-out";
clocks = <&ext_osc32k>;
#clock-cells = <1>;
};
@@ -656,18 +664,16 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
- #address-cells = <1>;
- #size-cells = <0>;
#gpio-cells = <3>;
- r_rsb_pins: r_rsb {
+ r_rsb_pins: r-rsb-pins {
pins = "PL0", "PL1";
function = "s_rsb";
drive-strength = <20>;
bias-pull-up;
};
- r_uart_pins_a: r_uart@0 {
+ r_uart_pins_a: r-uart-pins {
pins = "PL2", "PL3";
function = "s_uart";
};
diff --git a/arch/arm/boot/dts/sun8i-a23-evb.dts b/arch/arm/boot/dts/sun8i-a23-evb.dts
index 8a93697..53fb1be 100644
--- a/arch/arm/boot/dts/sun8i-a23-evb.dts
+++ b/arch/arm/boot/dts/sun8i-a23-evb.dts
@@ -65,14 +65,10 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
@@ -80,21 +76,21 @@
vref-supply = <®_vcc3v0>;
status = "okay";
- button@190 {
+ button-190 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <190000>;
};
- button@390 {
+ button-390 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <390000>;
};
- button@600 {
+ button-600 {
label = "Home";
linux,code = <KEY_HOME>;
channel = <0>;
@@ -103,22 +99,12 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_evb>;
vmmc-supply = <®_vcc3v0>;
bus-width = <4>;
cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
status = "okay";
};
-&pio {
- mmc0_cd_pin_evb: mmc0_cd_pin@0 {
- pins = "PB4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
/*
* The RX line has a non-populated resistance. In order to use it, you
* need to solder R207 on the back of the board in order to close the
diff --git a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
index e3c7a25..bcbc9b07 100644
--- a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
+++ b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
@@ -63,7 +63,7 @@
};
&lradc {
- button@600 {
+ button-600 {
label = "Back";
linux,code = <KEY_BACK>;
channel = <0>;
diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
index 649e313..d5f6aeb 100644
--- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
+++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
@@ -54,8 +54,6 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_pwrseq_pin_mid2407>;
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
/* The esp8089 needs 200 ms after driving wifi-en high */
post-power-on-delay-ms = <200>;
@@ -71,7 +69,7 @@
&mmc1 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins_a>;
+ pinctrl-0 = <&mmc1_pg_pins>;
vmmc-supply = <®_dldo1>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
@@ -85,17 +83,6 @@
};
};
-&mmc1_pins_a {
- bias-pull-up;
-};
-
-&r_pio {
- wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 {
- pins = "PL6";
- function = "gpio_out";
- };
-};
-
&touchscreen {
reg = <0x40>;
compatible = "silead,gsl1680";
diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts
index 6b3bcae..9f9232a 100644
--- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts
+++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts
@@ -54,8 +54,6 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_pwrseq_pin_mid2809>;
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
/* The esp8089 needs 200 ms after driving wifi-en high */
post-power-on-delay-ms = <200>;
@@ -64,7 +62,7 @@
&mmc1 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins_a>;
+ pinctrl-0 = <&mmc1_pg_pins>;
vmmc-supply = <®_dldo1>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
@@ -78,17 +76,6 @@
};
};
-&mmc1_pins_a {
- bias-pull-up;
-};
-
-&r_pio {
- wifi_pwrseq_pin_mid2809: wifi_pwrseq_pin@0 {
- pins = "PL6";
- function = "gpio_out";
- };
-};
-
&touchscreen {
reg = <0x40>;
compatible = "silead,gsl3670";
diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi
index 58e6585..d00055e 100644
--- a/arch/arm/boot/dts/sun8i-a23.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23.dtsi
@@ -45,11 +45,7 @@
#include "sun8i-a23-a33.dtsi"
/ {
- memory {
- reg = <0x40000000 0x40000000>;
- };
-
- soc@1c00000 {
+ soc {
codec: codec@1c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-a23-codec";
diff --git a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
index f711599..2dfdd0a 100644
--- a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
+++ b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
@@ -69,7 +69,7 @@
};
&lradc {
- button@600 {
+ button-600 {
label = "Back";
linux,code = <KEY_BACK>;
channel = <0>;
@@ -79,7 +79,7 @@
&mmc1 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins_a>;
+ pinctrl-0 = <&mmc1_pg_pins>;
vmmc-supply = <®_dldo1>;
bus-width = <4>;
non-removable;
diff --git a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
index 3e05959..3177630 100644
--- a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
+++ b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
@@ -70,13 +70,9 @@
};
};
-&mmc1_pins_a {
- bias-pull-up;
-};
-
&mmc1 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins_a>;
+ pinctrl-0 = <&mmc1_pg_pins>;
vmmc-supply = <®_dldo1>;
bus-width = <4>;
non-removable;
@@ -88,7 +84,7 @@
};
&r_pio {
- led_pin_d978: led_pin_d978@0 {
+ led_pin_d978: led-pin {
pins = "PL5";
function = "gpio_out";
drive-strength = <20>;
@@ -101,7 +97,7 @@
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_a>,
- <&uart1_pins_cts_rts_a>;
+ pinctrl-0 = <&uart1_pg_pins>,
+ <&uart1_cts_rts_pg_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts
index a1a1eb6..3d78169 100644
--- a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts
+++ b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts
@@ -82,8 +82,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
@@ -207,7 +205,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_b>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
index 541acb4..f366726 100644
--- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
+++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
@@ -117,21 +117,21 @@
vref-supply = <®_dcdc1>;
status = "okay";
- button@200 {
+ button-200 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <191011>;
};
- button@400 {
+ button-400 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <391304>;
};
- button@600 {
+ button-600 {
label = "Home";
linux,code = <KEY_HOME>;
channel = <0>;
@@ -140,8 +140,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>;
vmmc-supply = <®_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
@@ -161,22 +159,12 @@
&mmc2_8bit_pins {
/* Increase drive strength for DDR modes */
drive-strength = <40>;
- /* eMMC is missing pull-ups */
- bias-pull-up;
};
&ohci0 {
status = "okay";
};
-&pio {
- mmc0_cd_pin_sina33: mmc0_cd_pin@0 {
- pins = "PB4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&r_rsb {
status = "okay";
@@ -278,7 +266,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_b>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index c1cc8f0..626152c 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -131,14 +131,14 @@
#cooling-cells = <2>;
};
- cpu@1 {
+ cpu1: cpu@1 {
clocks = <&ccu CLK_CPUX>;
clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
#cooling-cells = <2>;
};
- cpu@2 {
+ cpu2: cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
@@ -148,7 +148,7 @@
#cooling-cells = <2>;
};
- cpu@3 {
+ cpu3: cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
@@ -186,32 +186,13 @@
};
};
- memory {
- reg = <0x40000000 0x80000000>;
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- /* Address must be kept in the lower 256 MiBs of DRAM for VE. */
- cma_pool: cma@4a000000 {
- compatible = "shared-dma-pool";
- size = <0x6000000>;
- alloc-ranges = <0x4a000000 0x6000000>;
- reusable;
- linux,cma-default;
- };
- };
-
sound: sound {
compatible = "simple-audio-card";
simple-audio-card,name = "sun8i-a33-audio";
simple-audio-card,format = "i2s";
simple-audio-card,frame-master = <&link_codec>;
simple-audio-card,bitclock-master = <&link_codec>;
- simple-audio-card,mclk-fs = <512>;
+ simple-audio-card,mclk-fs = <128>;
simple-audio-card,aux-devs = <&codec_analog>;
simple-audio-card,routing =
"Left DAC", "AIF1 Slot 0 Left",
@@ -227,7 +208,7 @@
};
};
- soc@1c00000 {
+ soc {
tcon0: lcd-controller@1c0c000 {
compatible = "allwinner,sun8i-a33-tcon";
reg = <0x01c0c000 0x1000>;
@@ -269,7 +250,7 @@
};
};
- video-codec@01c0e000 {
+ video-codec@1c0e000 {
compatible = "allwinner,sun8i-a33-video-engine";
reg = <0x01c0e000 0x1000>;
clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
@@ -479,11 +460,17 @@
cooling-maps {
map0 {
trip = <&cpu_alert0>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu_alert1>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map2 {
@@ -550,7 +537,7 @@
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- uart0_pins_b: uart0@1 {
+ uart0_pb_pins: uart0-pb-pins {
pins = "PB0", "PB1";
function = "uart0";
};
diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
index 1537ce1..98e8cea 100644
--- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
@@ -160,6 +160,7 @@
vmmc-supply = <®_dcdc1>;
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
+ bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 5617dd3..b099d2f 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -187,11 +187,6 @@
status = "disabled";
};
- memory {
- reg = <0x40000000 0x80000000>;
- device_type = "memory";
- };
-
cpu0_opp_table: opp_table0 {
compatible = "operating-points-v2";
opp-shared;
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 3ecfabb..d50dbd5 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -47,19 +47,19 @@
compatible = "operating-points-v2";
opp-shared;
- opp@648000000 {
+ opp-648000000 {
opp-hz = /bits/ 64 <648000000>;
opp-microvolt = <1040000 1040000 1300000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
- opp@816000000 {
+ opp-816000000 {
opp-hz = /bits/ 64 <816000000>;
opp-microvolt = <1100000 1100000 1300000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
- opp@1008000000 {
+ opp-1008000000 {
opp-hz = /bits/ 64 <1008000000>;
opp-microvolt = <1200000 1200000 1300000>;
clock-latency-ns = <244144>; /* 8 32k periods */
@@ -119,20 +119,6 @@
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- cma_pool: cma@4a000000 {
- compatible = "shared-dma-pool";
- size = <0x6000000>;
- alloc-ranges = <0x4a000000 0x6000000>;
- reusable;
- linux,cma-default;
- };
- };
-
soc {
system-control@1c00000 {
compatible = "allwinner,sun8i-h3-system-control";
@@ -156,7 +142,7 @@
};
};
- video-codec@01c0e000 {
+ video-codec@1c0e000 {
compatible = "allwinner,sun8i-h3-video-engine";
reg = <0x01c0e000 0x1000>;
clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
@@ -241,3 +227,7 @@
&pio {
compatible = "allwinner,sun8i-h3-pinctrl";
};
+
+&rtc {
+ compatible = "allwinner,sun8i-h3-rtc";
+};
diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi
index c676940..719ad76 100644
--- a/arch/arm/boot/dts/sun8i-q8-common.dtsi
+++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi
@@ -70,7 +70,7 @@
&mmc1 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins_a>;
+ pinctrl-0 = <&mmc1_pg_pins>;
vmmc-supply = <®_dldo1>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
@@ -82,12 +82,8 @@
};
};
-&mmc1_pins_a {
- bias-pull-up;
-};
-
&r_pio {
- wifi_pwrseq_pin_q8: wifi_pwrseq_pin@0 {
+ wifi_pwrseq_pin_q8: wifi-pwrseq-pins {
pins = "PL6", "PL7", "PL11";
function = "gpio_in";
bias-pull-up;
diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
index 0dbdb29..83d32a1 100644
--- a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
+++ b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
@@ -103,13 +103,13 @@
};
&cpu0_opp_table {
- opp@1104000000 {
+ opp-1104000000 {
opp-hz = /bits/ 64 <1104000000>;
opp-microvolt = <1320000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
- opp@1200000000 {
+ opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1320000>;
clock-latency-ns = <244144>; /* 8 32k periods */
@@ -124,30 +124,7 @@
status = "okay";
};
-/* This is the i2c bus exposed on the DSI connector for the touch panel */
-&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "disabled";
-};
-
-/* This is the i2c bus exposed on the GPIO header */
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "disabled";
-};
-
-/* This is the i2c bus exposed on the CSI connector to control the sensor */
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "disabled";
-};
-
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
@@ -156,7 +133,7 @@
&mmc1 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins_a>;
+ pinctrl-0 = <&mmc1_pg_pins>;
vmmc-supply = <®_aldo1>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
@@ -292,13 +269,13 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_b>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_a>, <&uart1_pins_cts_rts_a>;
+ pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pg_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts b/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts
index fc0658c..32cf1ab 100644
--- a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts
+++ b/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts
@@ -25,7 +25,7 @@
* PF can also be used for the SD card so PB is preferred.
*/
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pf_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/sun8i-r16-parrot.dts
index 472c03b..316998e 100644
--- a/arch/arm/boot/dts/sun8i-r16-parrot.dts
+++ b/arch/arm/boot/dts/sun8i-r16-parrot.dts
@@ -63,8 +63,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_parrot>;
led1 {
label = "parrot:led1:usr";
@@ -97,8 +95,6 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
/*
@@ -111,14 +107,14 @@
vref-supply = <®_aldo3>;
status = "okay";
- button@0 {
+ button-190 {
label = "V+";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <190000>;
};
- button@1 {
+ button-390 {
label = "V-";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
@@ -128,8 +124,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_parrot>;
vmmc-supply = <®_dcdc1>;
cd-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */
bus-width = <4>;
@@ -138,7 +132,7 @@
&mmc1 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_parrot>;
+ pinctrl-0 = <&mmc1_pg_pins>;
vmmc-supply = <®_aldo1>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
@@ -158,7 +152,6 @@
&mmc2_8bit_pins {
drive-strength = <40>;
- bias-pull-up;
};
&ohci0 {
@@ -166,34 +159,11 @@
};
&pio {
- mmc0_cd_pin_parrot: mmc0_cd_pin@0 {
- pins = "PD14";
- function = "gpio_in";
- bias-pull-up;
- };
-
- led_pins_parrot: led_pins@0 {
- pins = "PE16", "PE17";
- function = "gpio_out";
- };
-
- usb0_id_det: usb0_id_detect_pin@0 {
+ usb0_id_det: usb0-id-detect-pin {
pins = "PD10";
function = "gpio_in";
bias-pull-up;
};
-
- usb1_vbus_pin_parrot: usb1_vbus_pin@0 {
- pins = "PD12";
- function = "gpio_out";
- };
-};
-
-&r_pio {
- wifi_reset_pin_parrot: wifi_reset_pin@0 {
- pins = "PL6";
- function = "gpio_out";
- };
};
&r_rsb {
@@ -319,8 +289,6 @@
};
®_usb1_vbus {
- pinctrl-names = "default";
- pinctrl-0 = <&usb1_vbus_pin_parrot>;
gpio = <&pio 3 12 GPIO_ACTIVE_HIGH>; /* PD12 */
status = "okay";
};
@@ -331,7 +299,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_b>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 6f4c9ca..89762db 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -61,6 +61,7 @@
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
+ clock-accuracy = <50000>;
clock-output-names = "osc24M";
};
@@ -68,7 +69,8 @@
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
- clock-output-names = "osc32k";
+ clock-accuracy = <20000>;
+ clock-output-names = "ext-osc32k";
};
};
@@ -313,17 +315,27 @@
ccu: clock@1c20000 {
compatible = "allwinner,sun8i-r40-ccu";
reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&osc32k>;
+ clocks = <&osc24M>, <&rtc 0>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
};
+ rtc: rtc@1c20400 {
+ compatible = "allwinner,sun8i-r40-rtc",
+ "allwinner,sun8i-h3-rtc";
+ reg = <0x01c20400 0x400>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clock-output-names = "osc32k", "osc32k-out";
+ clocks = <&osc32k>;
+ #clock-cells = <1>;
+ };
+
pio: pinctrl@1c20800 {
compatible = "allwinner,sun8i-r40-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
index 5e8a95a..189e479 100644
--- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
@@ -73,8 +73,6 @@
reg = <0x40>;
interrupt-parent = <&pio>;
interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */
- pinctrl-names = "default";
- pinctrl-0 = <&ts_power_pin>;
power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
/* Tablet dts must provide reg and compatible */
status = "disabled";
@@ -82,8 +80,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
vmmc-supply = <®_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
@@ -91,18 +87,7 @@
};
&pio {
- mmc0_cd_pin: mmc0_cd_pin@0 {
- pins = "PB4";
- function = "gpio_in";
- bias-pull-up;
- };
-
- ts_power_pin: ts_power_pin@0 {
- pins = "PH1";
- function = "gpio_out";
- };
-
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH8";
function = "gpio_in";
bias-pull-up;
diff --git a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts b/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
new file mode 100644
index 0000000..6931aaa
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <[email protected]>
+ * Copyright (C) 2017 Icenowy Zheng <[email protected]>
+ * Copyright (C) 2018 Hao Zhang <[email protected]>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "t3-cqa3t-bv3";
+ compatible = "qihua,t3-cqa3t-bv3", "allwinner,sun8i-t3",
+ "allwinner,sun8i-r40";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ reg_vcc5v0: vcc5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+ enable-active-high;
+ };
+};
+
+&ahci {
+ ahci-supply = <®_dldo4>;
+ phy-supply = <®_eldo3>;
+ status = "okay";
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&mmc0 {
+ vmmc-supply = <®_dcdc1>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
+ status = "okay";
+};
+
+&mmc2 {
+ vmmc-supply = <®_dcdc1>;
+ vqmmc-supply = <®_dcdc1>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+®_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-name = "vcc-pa";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "avcc";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-3v0";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-sys";
+};
+
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pg";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-dldo3";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vcc-pe";
+};
+
+&tcon_tv0 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_vcc5v0>;
+ usb2_vbus-supply = <®_vcc5v0>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
index ad17360..db5cd0b 100644
--- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
+++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
@@ -66,28 +66,28 @@
vref-supply = <®_vcc3v0>;
status = "okay";
- button@200 {
+ button-200 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <200000>;
};
- button@400 {
+ button-400 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <400000>;
};
- button@600 {
+ button-600 {
label = "Select";
linux,code = <KEY_SELECT>;
channel = <0>;
voltage = <600000>;
};
- button@800 {
+ button-800 {
label = "Start";
linux,code = <KEY_OK>;
channel = <0>;
diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts
index 387fc2a..99c8cf7 100644
--- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts
+++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts
@@ -78,8 +78,6 @@
};
&mmc0 {
- pinctrl-0 = <&mmc0_pins_a>;
- pinctrl-names = "default";
broken-cd;
bus-width = <4>;
vmmc-supply = <®_vcc3v3>;
@@ -87,7 +85,7 @@
};
&uart0 {
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
pinctrl-names = "default";
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index 443b083..21e1806 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -192,6 +192,8 @@
resets = <&ccu RST_BUS_MMC0>;
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -292,17 +294,17 @@
interrupt-controller;
#interrupt-cells = <3>;
- i2c0_pins: i2c0 {
+ i2c0_pins: i2c0-pins {
pins = "PB6", "PB7";
function = "i2c0";
};
- uart0_pins_a: uart0@0 {
+ uart0_pb_pins: uart0-pb-pins {
pins = "PB8", "PB9";
function = "uart0";
};
- mmc0_pins_a: mmc0@0 {
+ mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
function = "mmc0";
@@ -310,7 +312,7 @@
bias-pull-up;
};
- mmc1_pins: mmc1 {
+ mmc1_pins: mmc1-pins {
pins = "PG0", "PG1", "PG2", "PG3",
"PG4", "PG5";
function = "mmc1";
@@ -318,7 +320,7 @@
bias-pull-up;
};
- spi0_pins: spi0 {
+ spi0_pins: spi0-pins {
pins = "PC0", "PC1", "PC2", "PC3";
function = "spi0";
};
diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
new file mode 100644
index 0000000..a1154e6
--- /dev/null
+++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <[email protected]>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+/ {
+ model = "Lichee Pi Nano";
+ compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pe_pins>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi
new file mode 100644
index 0000000..aff5f90
--- /dev/null
+++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <[email protected]>
+ * Copyright 2018 Mesih Kilinc <[email protected]>
+ */
+
+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+
+ clocks {
+ osc24M: clk-24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
+ };
+
+ osc32k: clk-32k {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "osc32k";
+ };
+ };
+
+ cpus {
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram-controller@1c00000 {
+ compatible = "allwinner,suniv-f1c100s-system-control",
+ "allwinner,sun4i-a10-system-control";
+ reg = <0x01c00000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram_d: sram@10000 {
+ compatible = "mmio-sram";
+ reg = <0x00010000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00010000 0x1000>;
+
+ otg_sram: sram-section@0 {
+ compatible = "allwinner,suniv-f1c100s-sram-d",
+ "allwinner,sun4i-a10-sram-d";
+ reg = <0x0000 0x1000>;
+ status = "disabled";
+ };
+ };
+ };
+
+ ccu: clock@1c20000 {
+ compatible = "allwinner,suniv-f1c100s-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ intc: interrupt-controller@1c20400 {
+ compatible = "allwinner,suniv-f1c100s-ic";
+ reg = <0x01c20400 0x400>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ pio: pinctrl@1c20800 {
+ compatible = "allwinner,suniv-f1c100s-pinctrl";
+ reg = <0x01c20800 0x400>;
+ interrupts = <38>, <39>, <40>;
+ clocks = <&ccu 37>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #gpio-cells = <3>;
+
+ uart0_pe_pins: uart0-pe-pins {
+ pins = "PE0", "PE1";
+ function = "uart0";
+ };
+ };
+
+ timer@1c20c00 {
+ compatible = "allwinner,suniv-f1c100s-timer";
+ reg = <0x01c20c00 0x90>;
+ interrupts = <13>;
+ clocks = <&osc24M>;
+ };
+
+ wdt: watchdog@1c20ca0 {
+ compatible = "allwinner,suniv-f1c100s-wdt",
+ "allwinner,sun4i-a10-wdt";
+ reg = <0x01c20ca0 0x20>;
+ };
+
+ uart0: serial@1c25000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c25000 0x400>;
+ interrupts = <1>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu 38>;
+ resets = <&ccu 24>;
+ status = "disabled";
+ };
+
+ uart1: serial@1c25400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c25400 0x400>;
+ interrupts = <2>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu 39>;
+ resets = <&ccu 25>;
+ status = "disabled";
+ };
+
+ uart2: serial@1c25800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c25800 0x400>;
+ interrupts = <3>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu 40>;
+ resets = <&ccu 26>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 4b1530e..464fe36 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -86,6 +86,7 @@
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
+ clock-accuracy = <50000>;
clock-output-names = "osc24M";
};
@@ -93,15 +94,8 @@
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
- clock-output-names = "osc32k";
- };
-
- iosc: internal-osc-clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <16000000>;
- clock-accuracy = <300000000>;
- clock-output-names = "iosc";
+ clock-accuracy = <50000>;
+ clock-output-names = "ext_osc32k";
};
};
@@ -375,7 +369,7 @@
ccu: clock@1c20000 {
/* compatible is in per SoC .dtsi file */
reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&osc32k>;
+ clocks = <&osc24M>, <&rtc 0>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
@@ -386,7 +380,7 @@
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
@@ -789,17 +783,19 @@
};
rtc: rtc@1f00000 {
- compatible = "allwinner,sun6i-a31-rtc";
- reg = <0x01f00000 0x54>;
+ /* compatible is in per SoC .dtsi file */
+ reg = <0x01f00000 0x400>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ clock-output-names = "osc32k", "osc32k-out", "iosc";
+ clocks = <&osc32k>;
+ #clock-cells = <1>;
};
r_ccu: clock@1f01400 {
compatible = "allwinner,sun8i-h3-r-ccu";
reg = <0x01f01400 0x100>;
- clocks = <&osc24M>, <&osc32k>, <&iosc>,
- <&ccu 9>;
+ clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu 9>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
#reset-cells = <1>;
@@ -837,7 +833,7 @@
compatible = "allwinner,sun8i-h3-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+ clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&rtc 0>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
diff --git a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi
index ddf4e72..0d002f8 100644
--- a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi
+++ b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi
@@ -121,7 +121,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi b/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi
index 245d0bc..117198c 100644
--- a/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi
@@ -46,13 +46,13 @@
&i2c0 {
pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
+ pinctrl-0 = <&i2c0_pins>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
+ pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
@@ -60,14 +60,14 @@
vref-supply = <®_vcc3v0>;
status = "okay";
- button@200 {
+ button-200 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <200000>;
};
- button@400 {
+ button-400 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
@@ -77,6 +77,6 @@
&pwm {
pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pins>;
+ pinctrl-0 = <&pwm0_pin>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 183c5ac..b113e47 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -140,6 +140,18 @@
status = "disabled";
};
+ vic@54340000 {
+ compatible = "nvidia,tegra124-vic";
+ reg = <0x0 0x54340000 0x0 0x00040000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_VIC03>;
+ clock-names = "vic";
+ resets = <&tegra_car 178>;
+ reset-names = "vic";
+
+ iommus = <&mc TEGRA_SWGROUP_VIC>;
+ };
+
sor@54540000 {
compatible = "nvidia,tegra124-sor";
reg = <0x0 0x54540000 0x0 0x00040000>;
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 2086975..dcad6d6 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -632,6 +632,8 @@
memory-controller@7000f400 {
compatible = "nvidia,tegra20-emc";
reg = <0x7000f400 0x200>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_EMC>;
#address-cells = <1>;
#size-cells = <0>;
};
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index 4488c8f..a9569d1 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -43,11 +43,6 @@
bank-width = <4>;
};
- v2m_video_ram: vram@2,00000000 {
- compatible = "arm,vexpress-vram";
- reg = <2 0x00000000 0x00800000>;
- };
-
ethernet@2,02000000 {
compatible = "smsc,lan9118", "smsc,lan9115";
reg = <2 0x02000000 0x10000>;
@@ -223,13 +218,24 @@
v2m_i2c_dvi: i2c@160000 {
compatible = "arm,versatile-i2c";
reg = <0x160000 0x1000>;
-
#address-cells = <1>;
#size-cells = <0>;
dvi-transmitter@39 {
compatible = "sil,sii9022-tpi", "sil,sii9022";
reg = <0x39>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dvi_bridge_in: endpoint {
+ remote-endpoint = <&clcd_pads>;
+ };
+ };
+ };
};
dvi-transmitter@60 {
@@ -260,37 +266,16 @@
interrupts = <14>;
clocks = <&v2m_oscclk1>, <&smbclk>;
clock-names = "clcdclk", "apb_pclk";
- memory-region = <&v2m_video_ram>;
- max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
+ /* 800x600 16bpp @36MHz works fine */
+ max-memory-bandwidth = <54000000>;
+ memory-region = <&vram>;
port {
- v2m_clcd_pads: endpoint {
- remote-endpoint = <&v2m_clcd_panel>;
+ clcd_pads: endpoint {
+ remote-endpoint = <&dvi_bridge_in>;
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
};
};
-
- panel {
- compatible = "panel-dpi";
-
- port {
- v2m_clcd_panel: endpoint {
- remote-endpoint = <&v2m_clcd_pads>;
- };
- };
-
- panel-timing {
- clock-frequency = <25175000>;
- hactive = <640>;
- hback-porch = <40>;
- hfront-porch = <24>;
- hsync-len = <96>;
- vactive = <480>;
- vback-porch = <32>;
- vfront-porch = <11>;
- vsync-len = <2>;
- };
- };
};
};
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index 4db42f6..fd42e119 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -43,11 +43,6 @@
bank-width = <4>;
};
- v2m_video_ram: vram@3,00000000 {
- compatible = "arm,vexpress-vram";
- reg = <3 0x00000000 0x00800000>;
- };
-
ethernet@3,02000000 {
compatible = "smsc,lan9118", "smsc,lan9115";
reg = <3 0x02000000 0x10000>;
@@ -223,13 +218,37 @@
v2m_i2c_dvi: i2c@16000 {
compatible = "arm,versatile-i2c";
reg = <0x16000 0x1000>;
-
#address-cells = <1>;
#size-cells = <0>;
dvi-transmitter@39 {
compatible = "sil,sii9022-tpi", "sil,sii9022";
reg = <0x39>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Both the core tile and the motherboard routes their output
+ * pads to this transmitter. The motherboard system controller
+ * can select one of them as input using a mux register in
+ * "arm,vexpress-muxfpga". The Vexpress with the CA9 core tile is
+ * the only platform with this specific set-up.
+ */
+ port@0 {
+ reg = <0>;
+ dvi_bridge_in_ct: endpoint {
+ remote-endpoint = <&clcd_pads_ct>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ dvi_bridge_in_mb: endpoint {
+ remote-endpoint = <&clcd_pads_mb>;
+ };
+ };
+ };
};
dvi-transmitter@60 {
@@ -253,6 +272,7 @@
reg-shift = <2>;
};
+
clcd@1f000 {
compatible = "arm,pl111", "arm,primecell";
reg = <0x1f000 0x1000>;
@@ -260,37 +280,16 @@
interrupts = <14>;
clocks = <&v2m_oscclk1>, <&smbclk>;
clock-names = "clcdclk", "apb_pclk";
- memory-region = <&v2m_video_ram>;
- max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
+ /* 800x600 16bpp @36MHz works fine */
+ max-memory-bandwidth = <54000000>;
+ memory-region = <&vram>;
port {
- v2m_clcd_pads: endpoint {
- remote-endpoint = <&v2m_clcd_panel>;
+ clcd_pads_mb: endpoint {
+ remote-endpoint = <&dvi_bridge_in_mb>;
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
};
};
-
- panel {
- compatible = "panel-dpi";
-
- port {
- v2m_clcd_panel: endpoint {
- remote-endpoint = <&v2m_clcd_pads>;
- };
- };
-
- panel-timing {
- clock-frequency = <25175000>;
- hactive = <640>;
- hback-porch = <40>;
- hfront-porch = <24>;
- hsync-len = <96>;
- vactive = <480>;
- vback-porch = <32>;
- vfront-porch = <11>;
- vsync-len = <2>;
- };
- };
};
};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index 3971427a..0dc4277 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -53,6 +53,20 @@
reg = <0 0x80000000 0 0x40000000>;
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* Chipselect 2 is physically at 0x18000000 */
+ vram: vram@18000000 {
+ /* 8 MB of designated video RAM */
+ compatible = "shared-dma-pool";
+ reg = <0 0x18000000 0 0x00800000>;
+ no-map;
+ };
+ };
+
hdlcd@2b000000 {
compatible = "arm,hdlcd";
reg = <0 0x2b000000 0 0x1000>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index ac6b90e..a2ccacd 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -104,6 +104,20 @@
reg = <0 0x80000000 0 0x40000000>;
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* Chipselect 2 is physically at 0x18000000 */
+ vram: vram@18000000 {
+ /* 8 MB of designated video RAM */
+ compatible = "shared-dma-pool";
+ reg = <0 0x18000000 0 0x00800000>;
+ no-map;
+ };
+ };
+
wdt@2a490000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0 0x2a490000 0 0x1000>;
@@ -393,10 +407,11 @@
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- etb_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port0>;
+ in-ports {
+ port {
+ etb_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
};
};
};
@@ -407,10 +422,11 @@
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- tpiu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
};
};
};
@@ -421,11 +437,10 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* replicator output ports */
port@0 {
reg = <0>;
replicator_out_port0: endpoint {
@@ -439,12 +454,11 @@
remote-endpoint = <&tpiu_in_port>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel_out_port0>;
};
};
@@ -457,40 +471,36 @@
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel_out_port0: endpoint {
remote-endpoint =
<&replicator_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm0_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm1_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out_port>;
};
};
@@ -500,7 +510,6 @@
port@4 {
reg = <4>;
funnel_in_port4: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out_port>;
};
};
@@ -508,7 +517,6 @@
port@5 {
reg = <5>;
funnel_in_port5: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out_port>;
};
};
@@ -522,9 +530,11 @@
cpu = <&cpu0>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- ptm0_out_port: endpoint {
- remote-endpoint = <&funnel_in_port0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
};
};
};
@@ -536,9 +546,11 @@
cpu = <&cpu1>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- ptm1_out_port: endpoint {
- remote-endpoint = <&funnel_in_port1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
};
};
};
@@ -550,9 +562,11 @@
cpu = <&cpu2>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- etm0_out_port: endpoint {
- remote-endpoint = <&funnel_in_port2>;
+ out-ports {
+ port {
+ etm0_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port2>;
+ };
};
};
};
@@ -564,9 +578,11 @@
cpu = <&cpu3>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- etm1_out_port: endpoint {
- remote-endpoint = <&funnel_in_port4>;
+ out-ports {
+ port {
+ etm1_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port4>;
+ };
};
};
};
@@ -578,9 +594,11 @@
cpu = <&cpu4>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- etm2_out_port: endpoint {
- remote-endpoint = <&funnel_in_port5>;
+ out-ports {
+ port {
+ etm2_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port5>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index e5b4a75..d5b47d5 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -55,6 +55,20 @@
reg = <0x80000000 0x40000000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Chipselect 2 is physically at 0x18000000 */
+ vram: vram@18000000 {
+ /* 8 MB of designated video RAM */
+ compatible = "shared-dma-pool";
+ reg = <0x18000000 0x00800000>;
+ no-map;
+ };
+ };
+
hdlcd@2a110000 {
compatible = "arm,hdlcd";
reg = <0x2a110000 0x1000>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index fc43873..d796efa 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -69,6 +69,20 @@
reg = <0x60000000 0x40000000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Chipselect 3 is physically at 0x4c000000 */
+ vram: vram@4c000000 {
+ /* 8 MB of designated video RAM */
+ compatible = "shared-dma-pool";
+ reg = <0x4c000000 0x00800000>;
+ no-map;
+ };
+ };
+
clcd@10020000 {
compatible = "arm,pl111", "arm,primecell";
reg = <0x10020000 0x1000>;
@@ -76,36 +90,15 @@
interrupts = <0 44 4>;
clocks = <&oscclk1>, <&oscclk2>;
clock-names = "clcdclk", "apb_pclk";
- max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */
+ /* 1024x768 16bpp @65MHz */
+ max-memory-bandwidth = <95000000>;
port {
- clcd_pads: endpoint {
- remote-endpoint = <&clcd_panel>;
+ clcd_pads_ct: endpoint {
+ remote-endpoint = <&dvi_bridge_in_ct>;
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
};
};
-
- panel {
- compatible = "panel-dpi";
-
- port {
- clcd_panel: endpoint {
- remote-endpoint = <&clcd_pads>;
- };
- };
-
- panel-timing {
- clock-frequency = <63500127>;
- hactive = <1024>;
- hback-porch = <152>;
- hfront-porch = <48>;
- hsync-len = <104>;
- vactive = <768>;
- vback-porch = <23>;
- vfront-porch = <3>;
- vsync-len = <4>;
- };
- };
};
memory-controller@100e0000 {
diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi
index 2e7e3ce..237b024 100644
--- a/arch/arm/boot/dts/vf500-colibri.dtsi
+++ b/arch/arm/boot/dts/vf500-colibri.dtsi
@@ -47,6 +47,7 @@
compatible = "toradex,vf610-colibri_vf50", "fsl,vf500";
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x8000000>;
};
diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi
index 76a0949..b0ec475 100644
--- a/arch/arm/boot/dts/vf500.dtsi
+++ b/arch/arm/boot/dts/vf500.dtsi
@@ -10,7 +10,6 @@
#size-cells = <1>;
chosen { };
aliases { };
- memory { device_type = "memory"; };
cpus {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/vf610-bk4.dts
new file mode 100644
index 0000000..689c893
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-bk4.dts
@@ -0,0 +1,502 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, [email protected]
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+ model = "Liebherr BK4 controller";
+ compatible = "lwn,bk4", "fsl,vf610";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x8000000>;
+ };
+
+ audio_ext: oscillator-audio {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ enet_ext: oscillator-ethernet {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ /* LED D5 */
+ led0: heartbeat {
+ label = "heartbeat";
+ gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vcc_3v3_mcu: regulator-vcc3v3mcu {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_mcu";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&adc0 {
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&adc1 {
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&can0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can0>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ status = "okay";
+};
+
+&clks {
+ clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
+ clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
+};
+
+&dspi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dspi0>;
+ bus-num = <0>;
+ status = "okay";
+
+ spidev0@0 {
+ compatible = "lwn,bk4";
+ spi-max-frequency = <30000000>;
+ reg = <0>;
+ fsl,spi-cs-sck-delay = <200>;
+ fsl,spi-sck-cs-delay = <400>;
+ };
+};
+
+&dspi3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dspi3>;
+ bus-num = <3>;
+ status = "okay";
+ spi-slave;
+
+ slave@0 {
+ compatible = "lwn,bk4";
+ spi-max-frequency = <30000000>;
+ reg = <0>;
+ };
+};
+
+&edma0 {
+ status = "okay";
+};
+
+&edma1 {
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&fec0 {
+ phy-mode = "rmii";
+ phy-handle = <ðphy0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec0>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@1 {
+ reg = <1>;
+ clocks = <&clks VF610_CLK_ENET_50M>;
+ clock-names = "rmii-ref";
+ };
+ };
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ phy-handle = <ðphy1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ clocks = <&clks VF610_CLK_ENET_50M>;
+ clock-names = "rmii-ref";
+ };
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ at24c256: eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ m41t62: rtc@68 {
+ compatible = "st,m41t62";
+ reg = <0x68>;
+ };
+};
+
+&nfc {
+ assigned-clocks = <&clks VF610_CLK_NFC>;
+ assigned-clock-rates = <33000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nfc>;
+ status = "okay";
+
+ nand@0 {
+ compatible = "fsl,vf610-nfc-nandcs";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-bus-width = <16>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <2048>;
+ nand-on-flash-bbt;
+ };
+};
+
+&qspi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi0>;
+ status = "okay";
+
+ n25q128a13_4: flash@0 {
+ compatible = "n25q128a13", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <66000000>;
+ spi-rx-bus-width = <4>;
+ reg = <0>;
+ };
+
+ n25q128a13_2: flash@1 {
+ compatible = "n25q128a13", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <66000000>;
+ spi-rx-bus-width = <2>;
+ reg = <1>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&usbdev0 {
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ disable-over-current;
+ status = "okay";
+};
+
+&usbmisc0 {
+ status = "okay";
+};
+
+&usbmisc1 {
+ status = "okay";
+};
+
+&usbphy0 {
+ status = "okay";
+};
+
+&usbphy1 {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* One_Wire_PSU_EN */
+ VF610_PAD_PTC29__GPIO_102 0x1183
+ /* SPI ENABLE */
+ VF610_PAD_PTB26__GPIO_96 0x1183
+ /* EB control */
+ VF610_PAD_PTE14__GPIO_119 0x1183
+ VF610_PAD_PTE4__GPIO_109 0x1181
+ /* Feedback_Lines */
+ VF610_PAD_PTC31__GPIO_104 0x1181
+ VF610_PAD_PTA7__GPIO_134 0x1181
+ VF610_PAD_PTD9__GPIO_88 0x1181
+ VF610_PAD_PTE1__GPIO_106 0x1183
+ VF610_PAD_PTB2__GPIO_24 0x1181
+ VF610_PAD_PTB3__GPIO_25 0x1181
+ VF610_PAD_PTB1__GPIO_23 0x1181
+ /* SDHC Enable */
+ VF610_PAD_PTE19__GPIO_124 0x1183
+ /* SDHC Overcurrent */
+ VF610_PAD_PTB23__GPIO_93 0x1181
+ /* GPI */
+ VF610_PAD_PTE2__GPIO_107 0x1181
+ VF610_PAD_PTE3__GPIO_108 0x1181
+ VF610_PAD_PTE5__GPIO_110 0x1181
+ VF610_PAD_PTE6__GPIO_111 0x1181
+ /* GPO */
+ VF610_PAD_PTE0__GPIO_105 0x1183
+ VF610_PAD_PTE7__GPIO_112 0x1183
+ /* RS485 Control */
+ VF610_PAD_PTB8__GPIO_30 0x1183
+ VF610_PAD_PTB9__GPIO_31 0x1183
+ VF610_PAD_PTE8__GPIO_113 0x1183
+ /* MPBUS MPB_EN */
+ VF610_PAD_PTE28__GPIO_133 0x1183
+ /* MISC */
+ VF610_PAD_PTE10__GPIO_115 0x1183
+ VF610_PAD_PTE11__GPIO_116 0x1183
+ VF610_PAD_PTE17__GPIO_122 0x1183
+ VF610_PAD_PTC30__GPIO_103 0x1183
+ VF610_PAD_PTB0__GPIO_22 0x1181
+ /* RESETINFO */
+ VF610_PAD_PTE26__GPIO_131 0x1183
+ VF610_PAD_PTD6__GPIO_85 0x1181
+ VF610_PAD_PTE27__GPIO_132 0x1181
+ VF610_PAD_PTE13__GPIO_118 0x1181
+ VF610_PAD_PTE21__GPIO_126 0x1181
+ VF610_PAD_PTE22__GPIO_127 0x1181
+ /* EE_5V_EN */
+ VF610_PAD_PTE18__GPIO_123 0x1183
+ /* EE_5V_OC_N */
+ VF610_PAD_PTE25__GPIO_130 0x1181
+ >;
+ };
+
+ pinctrl_can0: can0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__CAN0_RX 0x1181
+ VF610_PAD_PTB15__CAN0_TX 0x1182
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ VF610_PAD_PTB16__CAN1_RX 0x1181
+ VF610_PAD_PTB17__CAN1_TX 0x1182
+ >;
+ };
+
+ pinctrl_dspi0: dspi0grp {
+ fsl,pins = <
+ VF610_PAD_PTB18__DSPI0_CS1 0x1182
+ VF610_PAD_PTB19__DSPI0_CS0 0x1182
+ VF610_PAD_PTB20__DSPI0_SIN 0x1181
+ VF610_PAD_PTB21__DSPI0_SOUT 0x1182
+ VF610_PAD_PTB22__DSPI0_SCK 0x1182
+ >;
+ };
+
+ pinctrl_dspi3: dspi3grp {
+ fsl,pins = <
+ VF610_PAD_PTD10__DSPI3_CS0 0x1181
+ VF610_PAD_PTD11__DSPI3_SIN 0x1181
+ VF610_PAD_PTD12__DSPI3_SOUT 0x1182
+ VF610_PAD_PTD13__DSPI3_SCK 0x1181
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ VF610_PAD_PTB28__GPIO_98 0x219d
+ >;
+ };
+
+ pinctrl_fec0: fec0grp {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKIN 0x30dd
+ VF610_PAD_PTC0__ENET_RMII0_MDC 0x30de
+ VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30df
+ VF610_PAD_PTC2__ENET_RMII0_CRS 0x30dd
+ VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30dd
+ VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30dd
+ VF610_PAD_PTC5__ENET_RMII0_RXER 0x30dd
+ VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30de
+ VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30de
+ VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30de
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30de
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30df
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30dd
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30dd
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30dd
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30dd
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30de
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30de
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30de
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ /* Heart bit LED */
+ VF610_PAD_PTE12__GPIO_117 0x1183
+ /* LEDS */
+ VF610_PAD_PTE15__GPIO_120 0x1183
+ VF610_PAD_PTA12__GPIO_5 0x1183
+ VF610_PAD_PTA16__GPIO_6 0x1183
+ VF610_PAD_PTE9__GPIO_114 0x1183
+ VF610_PAD_PTE20__GPIO_125 0x1183
+ VF610_PAD_PTE23__GPIO_128 0x1183
+ VF610_PAD_PTE16__GPIO_121 0x1183
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ VF610_PAD_PTA22__I2C2_SCL 0x34df
+ VF610_PAD_PTA23__I2C2_SDA 0x34df
+ >;
+ };
+
+ pinctrl_nfc: nfcgrp {
+ fsl,pins = <
+ VF610_PAD_PTD23__NF_IO7 0x28df
+ VF610_PAD_PTD22__NF_IO6 0x28df
+ VF610_PAD_PTD21__NF_IO5 0x28df
+ VF610_PAD_PTD20__NF_IO4 0x28df
+ VF610_PAD_PTD19__NF_IO3 0x28df
+ VF610_PAD_PTD18__NF_IO2 0x28df
+ VF610_PAD_PTD17__NF_IO1 0x28df
+ VF610_PAD_PTD16__NF_IO0 0x28df
+ VF610_PAD_PTB24__NF_WE_B 0x28c2
+ VF610_PAD_PTB25__NF_CE0_B 0x28c2
+ VF610_PAD_PTB27__NF_RE_B 0x28c2
+ VF610_PAD_PTC26__NF_RB_B 0x283d
+ VF610_PAD_PTC27__NF_ALE 0x28c2
+ VF610_PAD_PTC28__NF_CLE 0x28c2
+ >;
+ };
+
+ pinctrl_qspi0: qspi0grp {
+ fsl,pins = <
+ VF610_PAD_PTD0__QSPI0_A_QSCK 0x397f
+ VF610_PAD_PTD1__QSPI0_A_CS0 0x397f
+ VF610_PAD_PTD2__QSPI0_A_DATA3 0x397f
+ VF610_PAD_PTD3__QSPI0_A_DATA2 0x397f
+ VF610_PAD_PTD4__QSPI0_A_DATA1 0x397f
+ VF610_PAD_PTD5__QSPI0_A_DATA0 0x397f
+ VF610_PAD_PTD7__QSPI0_B_QSCK 0x397f
+ VF610_PAD_PTD8__QSPI0_B_CS0 0x397f
+ VF610_PAD_PTD11__QSPI0_B_DATA1 0x397f
+ VF610_PAD_PTD12__QSPI0_B_DATA0 0x397f
+ >;
+ };
+
+ pinctrl_uart0: uart0grp {
+ fsl,pins = <
+ VF610_PAD_PTB10__UART0_TX 0x21a2
+ VF610_PAD_PTB11__UART0_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB4__UART1_TX 0x21a2
+ VF610_PAD_PTB5__UART1_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ VF610_PAD_PTB6__UART2_TX 0x21a2
+ VF610_PAD_PTB7__UART2_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ VF610_PAD_PTA20__UART3_TX 0x21a2
+ VF610_PAD_PTA21__UART3_RX 0x21a1
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi
index aeaf99f..05c9a39 100644
--- a/arch/arm/boot/dts/vf610-colibri.dtsi
+++ b/arch/arm/boot/dts/vf610-colibri.dtsi
@@ -47,6 +47,7 @@
compatible = "toradex,vf610-colibri_vf61", "fsl,vf610";
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x10000000>;
};
};
diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts
index a3014e8..ea1b996 100644
--- a/arch/arm/boot/dts/vf610-cosmic.dts
+++ b/arch/arm/boot/dts/vf610-cosmic.dts
@@ -20,6 +20,7 @@
};
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x10000000>;
};
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index 59fceea..dbb5ffc 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -14,6 +14,7 @@
};
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x8000000>;
};
diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts
index b76c3d04..7cdcc5f 100644
--- a/arch/arm/boot/dts/vf610-zii-cfu1.dts
+++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts
@@ -16,6 +16,7 @@
};
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi
index 5ae5abf..19eb4a8 100644
--- a/arch/arm/boot/dts/vf610-zii-dev.dtsi
+++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi
@@ -50,6 +50,7 @@
};
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
new file mode 100644
index 0000000..de6dfa5
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@@ -0,0 +1,851 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright (C) 2016-2018 Zodiac Inflight Innovations
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+ model = "ZII VF610 SCU4 AIB";
+ compatible = "zii,vf610scu4-aib", "zii,vf610dev", "fsl,vf610";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pinctrl_leds_debug>;
+ pinctrl-names = "default";
+
+ debug {
+ label = "zii:green:debug1";
+ gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ mdio-mux {
+ compatible = "mdio-mux-gpio";
+ pinctrl-0 = <&pinctrl_mdio_mux>;
+ pinctrl-names = "default";
+ gpios = <&gpio4 4 GPIO_ACTIVE_HIGH
+ &gpio4 5 GPIO_ACTIVE_HIGH
+ &gpio3 30 GPIO_ACTIVE_HIGH
+ &gpio3 31 GPIO_ACTIVE_HIGH>;
+ mdio-parent-bus = <&mdio1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio_mux_1: mdio@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0: switch0@0 {
+ compatible = "marvell,mv88e6190";
+ reg = <0>;
+ dsa,member = <0 0>;
+ eeprom-length = <65536>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <&fec1>;
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "aib2main_1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "aib2main_2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "eth_cu_1000_5";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "eth_cu_1000_6";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "eth_cu_1000_4";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "eth_cu_1000_7";
+ };
+
+ port@7 {
+ reg = <7>;
+ label = "modem_pic";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ switch0port10: port@10 {
+ reg = <10>;
+ label = "dsa";
+ phy-mode = "xgmii";
+ link = <&switch1port10
+ &switch3port10
+ &switch2port10>;
+ };
+ };
+ };
+ };
+
+ mdio_mux_2: mdio@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch1: switch1@0 {
+ compatible = "marvell,mv88e6190";
+ reg = <0>;
+ dsa,member = <0 1>;
+ eeprom-length = <65536>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ label = "eth_cu_1000_3";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "eth_cu_100_2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "eth_cu_100_3";
+ };
+
+ switch1port9: port@9 {
+ reg = <9>;
+ label = "dsa";
+ phy-mode = "xgmii";
+ link = <&switch3port10
+ &switch2port10>;
+ };
+
+ switch1port10: port@10 {
+ reg = <10>;
+ label = "dsa";
+ phy-mode = "xgmii";
+ link = <&switch0port10>;
+ };
+ };
+ };
+ };
+
+ mdio_mux_4: mdio@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch2: switch2@0 {
+ compatible = "marvell,mv88e6190";
+ reg = <0>;
+ dsa,member = <0 2>;
+ eeprom-length = <65536>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ label = "internal_j9";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "eth_fc_1000_2";
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ sfp = <&sff1>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "eth_fc_1000_3";
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ sfp = <&sff2>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "eth_fc_1000_4";
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ sfp = <&sff3>;
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "eth_fc_1000_5";
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ sfp = <&sff4>;
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "eth_fc_1000_6";
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ sfp = <&sff5>;
+ };
+
+ port@7 {
+ reg = <7>;
+ label = "eth_fc_1000_7";
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ sfp = <&sff6>;
+ };
+
+ port@9 {
+ reg = <9>;
+ label = "eth_fc_1000_1";
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ sfp = <&sff0>;
+ };
+
+ switch2port10: port@10 {
+ reg = <10>;
+ label = "dsa";
+ phy-mode = "2500base-x";
+ link = <&switch3port9
+ &switch1port9
+ &switch0port10>;
+ };
+ };
+ };
+ };
+
+ mdio_mux_8: mdio@8 {
+ reg = <8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch3: switch3@0 {
+ compatible = "marvell,mv88e6190";
+ reg = <0>;
+ dsa,member = <0 3>;
+ eeprom-length = <65536>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ label = "internal_j8";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "eth_fc_1000_8";
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ sfp = <&sff7>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "eth_fc_1000_9";
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ sfp = <&sff8>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "eth_fc_1000_10";
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ sfp = <&sff9>;
+ };
+
+ switch3port9: port@9 {
+ reg = <9>;
+ label = "dsa";
+ phy-mode = "2500base-x";
+ link = <&switch2port10>;
+ };
+
+ switch3port10: port@10 {
+ reg = <10>;
+ label = "dsa";
+ phy-mode = "xgmii";
+ link = <&switch1port9
+ &switch0port10>;
+ };
+ };
+ };
+ };
+ };
+
+ sff0: sff0 {
+ compatible = "sff,sff";
+ i2c-bus = <&sff0_i2c>;
+ los-gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff1: sff1 {
+ compatible = "sff,sff";
+ i2c-bus = <&sff1_i2c>;
+ los-gpios = <&gpio9 1 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff2: sff2 {
+ compatible = "sff,sff";
+ i2c-bus = <&sff2_i2c>;
+ los-gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff3: sff3 {
+ compatible = "sff,sff";
+ i2c-bus = <&sff3_i2c>;
+ los-gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff4: sff4 {
+ compatible = "sff,sff";
+ i2c-bus = <&sff4_i2c>;
+ los-gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff5: sff5 {
+ compatible = "sff,sff";
+ i2c-bus = <&sff5_i2c>;
+ los-gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio7 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff6: sff6 {
+ compatible = "sff,sff";
+ i2c-bus = <&sff6_i2c>;
+ los-gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff7: sff7 {
+ compatible = "sff,sff";
+ i2c-bus = <&sff7_i2c>;
+ los-gpios = <&gpio9 7 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff8: sff8 {
+ compatible = "sff,sff";
+ i2c-bus = <&sff8_i2c>;
+ los-gpios = <&gpio9 8 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff9: sff9 {
+ compatible = "sff,sff";
+ i2c-bus = <&sff9_i2c>;
+ los-gpios = <&gpio9 9 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_mcu";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&dspi0 {
+ pinctrl-0 = <&pinctrl_dspi0>;
+ pinctrl-names = "default";
+ bus-num = <0>;
+ status = "okay";
+
+ adc@5 {
+ compatible = "holt,hi8435";
+ reg = <5>;
+ gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&dspi1 {
+ bus-num = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dspi1>;
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partition@0 {
+ label = "m25p128-0";
+ reg = <0x0 0x01000000>;
+ };
+ };
+
+ spi-flash@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <1>;
+ spi-max-frequency = <50000000>;
+
+ partition@0 {
+ label = "m25p128-1";
+ reg = <0x0 0x01000000>;
+ };
+ };
+};
+
+&adc0 {
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&adc1 {
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&edma0 {
+ status = "okay";
+};
+
+&edma1 {
+ status = "okay";
+};
+
+&esdhc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc0>;
+ bus-width = <8>;
+ non-removable;
+ no-1-8-v;
+ no-sd;
+ no-sdio;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ no-sdio;
+ status = "okay";
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+
+ mdio1: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ status = "okay";
+
+ gpio5: pca9554@20 {
+ compatible = "nxp,pca9554";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio6: pca9554@22 {
+ compatible = "nxp,pca9554";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ lm75@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+
+ at24c04@50 {
+ compatible = "atmel,24c04";
+ reg = <0x50>;
+ };
+
+ at24c04@52 {
+ compatible = "atmel,24c04";
+ reg = <0x52>;
+ };
+
+ ds1682@6b {
+ compatible = "dallas,ds1682";
+ reg = <0x6b>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ adt7411@4a {
+ compatible = "adi,adt7411";
+ reg = <0x4a>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ gpio9: sx1503q@20 {
+ compatible = "semtech,sx1503q";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sx1503_20>;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+ gpio-controller;
+ };
+
+ lm75@4e {
+ compatible = "national,lm75";
+ reg = <0x4e>;
+ };
+
+ lm75@4f {
+ compatible = "national,lm75";
+ reg = <0x4f>;
+ };
+
+ gpio7: pca9555@23 {
+ compatible = "nxp,pca9555";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x23>;
+ };
+
+ adt7411@4a {
+ compatible = "adi,adt7411";
+ reg = <0x4a>;
+ };
+
+ at24c08@54 {
+ compatible = "atmel,24c08";
+ reg = <0x54>;
+ };
+
+ tca9548@70 {
+ compatible = "nxp,pca9548";
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ sff0_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ sff1_i2c: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ sff2_i2c: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ sff3_i2c: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ sff4_i2c: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+ };
+
+ tca9548@71 {
+ compatible = "nxp,pca9548";
+ pinctrl-names = "default";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sff5_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ sff6_i2c: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ sff7_i2c: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ sff8_i2c: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ sff9_i2c: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+};
+
+&uart1 {
+ linux,rs485-enabled-at-boot-time;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ rs485-rts-delay = <0 200>;
+ status = "okay";
+};
+
+&uart2 {
+ linux,rs485-enabled-at-boot-time;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ rs485-rts-delay = <0 200>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_dspi0: dspi0grp {
+ fsl,pins = <
+ VF610_PAD_PTB19__DSPI0_CS0 0x1182
+ VF610_PAD_PTB18__DSPI0_CS1 0x1182
+ VF610_PAD_PTB13__DSPI0_CS4 0x1182
+ VF610_PAD_PTB12__DSPI0_CS5 0x1182
+ VF610_PAD_PTB20__DSPI0_SIN 0x1181
+ VF610_PAD_PTB21__DSPI0_SOUT 0x1182
+ VF610_PAD_PTB22__DSPI0_SCK 0x1182
+ >;
+ };
+
+ pinctrl_dspi1: dspi1grp {
+ fsl,pins = <
+ VF610_PAD_PTD5__DSPI1_CS0 0x1182
+ VF610_PAD_PTD4__DSPI1_CS1 0x1182
+ VF610_PAD_PTC6__DSPI1_SIN 0x1181
+ VF610_PAD_PTC7__DSPI1_SOUT 0x1182
+ VF610_PAD_PTC8__DSPI1_SCK 0x1182
+ >;
+ };
+
+ pinctrl_dspi2: dspi2gpio {
+ fsl,pins = <
+ VF610_PAD_PTD30__GPIO_64 0x33e2
+ VF610_PAD_PTD29__GPIO_65 0x33e1
+ VF610_PAD_PTD28__GPIO_66 0x33e2
+ VF610_PAD_PTD27__GPIO_67 0x33e2
+ VF610_PAD_PTD26__GPIO_68 0x31c2
+ >;
+ };
+
+ pinctrl_esdhc0: esdhc0grp {
+ fsl,pins = <
+ VF610_PAD_PTC0__ESDHC0_CLK 0x31ef
+ VF610_PAD_PTC1__ESDHC0_CMD 0x31ef
+ VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef
+ VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef
+ VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef
+ VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef
+ VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef
+ VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef
+ VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef
+ VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKIN 0x30d1
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_i2c0: i2c0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__I2C0_SCL 0x37ff
+ VF610_PAD_PTB15__I2C0_SDA 0x37ff
+ >;
+ };
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ VF610_PAD_PTB16__I2C1_SCL 0x37ff
+ VF610_PAD_PTB17__I2C1_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ VF610_PAD_PTA22__I2C2_SCL 0x37ff
+ VF610_PAD_PTA23__I2C2_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ VF610_PAD_PTA30__I2C3_SCL 0x37ff
+ VF610_PAD_PTA31__I2C3_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_leds_debug: pinctrl-leds-debug {
+ fsl,pins = <
+ VF610_PAD_PTB26__GPIO_96 0x31c2
+ >;
+ };
+
+ pinctrl_mdio_mux: pinctrl-mdio-mux {
+ fsl,pins = <
+ VF610_PAD_PTE27__GPIO_132 0x31c2
+ VF610_PAD_PTE28__GPIO_133 0x31c2
+ VF610_PAD_PTE21__GPIO_126 0x31c2
+ VF610_PAD_PTE22__GPIO_127 0x31c2
+ >;
+ };
+
+ pinctrl_qspi0: qspi0grp {
+ fsl,pins = <
+ VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3
+ VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff
+ VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3
+ VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3
+ VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3
+ VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3
+ >;
+ };
+
+ pinctrl_sx1503_20: pinctrl-sx1503-20 {
+ fsl,pins = <
+ VF610_PAD_PTD31__GPIO_63 0x219d
+ >;
+ };
+
+ pinctrl_uart0: uart0grp {
+ fsl,pins = <
+ VF610_PAD_PTB10__UART0_TX 0x21a2
+ VF610_PAD_PTB11__UART0_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB23__UART1_TX 0x21a2
+ VF610_PAD_PTB24__UART1_RX 0x21a1
+ VF610_PAD_PTB25__UART1_RTS 0x21a2 /* Used as DE signal for the RS-485 transceiver */
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ VF610_PAD_PTD0__UART2_TX 0x21a2
+ VF610_PAD_PTD1__UART2_RX 0x21a1
+ VF610_PAD_PTD2__UART2_RTS 0x21a2 /* Used as DE signal for the RS-485 transceiver */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
index fe35766..757af56 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
@@ -24,6 +24,7 @@
};
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/vf610m4-colibri.dts
index 41ec66a..d4bc0e3 100644
--- a/arch/arm/boot/dts/vf610m4-colibri.dts
+++ b/arch/arm/boot/dts/vf610m4-colibri.dts
@@ -50,11 +50,12 @@
compatible = "fsl,vf610m4";
chosen {
- bootargs = "console=ttyLP2,115200 clk_ignore_unused init=/linuxrc rw";
- stdout-path = "&uart2";
+ bootargs = "clk_ignore_unused init=/linuxrc rw";
+ stdout-path = "serial2:115200";
};
memory@8c000000 {
+ device_type = "memory";
reg = <0x8c000000 0x3000000>;
};
};
diff --git a/arch/arm/boot/dts/vf610m4.dtsi b/arch/arm/boot/dts/vf610m4.dtsi
index 8293276..76bbfd5 100644
--- a/arch/arm/boot/dts/vf610m4.dtsi
+++ b/arch/arm/boot/dts/vf610m4.dtsi
@@ -50,7 +50,6 @@
#size-cells = <1>;
chosen { };
aliases { };
- memory { device_type = "memory"; };
};
&mscm_ir {
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 1c76168..63af623 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -1,7 +1,6 @@
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
CONFIG_CGROUPS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
index 92fd2c8..12659ce 100644
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@@ -10,7 +10,7 @@
#ifndef _ASM_PGTABLE_2LEVEL_H
#define _ASM_PGTABLE_2LEVEL_H
-#define __PAGETABLE_PMD_FOLDED
+#define __PAGETABLE_PMD_FOLDED 1
/*
* Hardware-wise, we have a two level page table structure, where the first
diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c
index 243a108..fd0053e 100644
--- a/arch/arm/mach-imx/cpuidle-imx6sx.c
+++ b/arch/arm/mach-imx/cpuidle-imx6sx.c
@@ -110,7 +110,7 @@ int __init imx6sx_cpuidle_init(void)
* except for power up sw2iso which need to be
* larger than LDO ramp up time.
*/
- imx_gpc_set_arm_power_up_timing(2, 1);
+ imx_gpc_set_arm_power_up_timing(0xf, 1);
imx_gpc_set_arm_power_down_timing(1, 1);
return cpuidle_register(&imx6sx_cpuidle_driver, NULL);
diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c
index 0341359..81232ec 100644
--- a/arch/arm/mach-mmp/mmp2-dt.c
+++ b/arch/arm/mach-mmp/mmp2-dt.c
@@ -31,7 +31,7 @@ static void __init mmp_init_time(void)
}
static const char *const mmp2_dt_board_compat[] __initconst = {
- "mrvl,mmp2-brownstone",
+ "mrvl,mmp2",
NULL,
};
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 6fe52819..339eb17 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -112,7 +112,7 @@
hvc #0
ldmfd sp!, {r0 - r3}
b cpu_v7_switch_mm
-ENDPROC(cpu_v7_smc_switch_mm)
+ENDPROC(cpu_v7_hvc_switch_mm)
#endif
ENTRY(cpu_v7_iciallu_switch_mm)
mov r3, #0
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 8d4f97f..38f4a01 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -18,5 +18,6 @@
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi
index e5eae8b..c3a618e 100644
--- a/arch/arm64/boot/dts/allwinner/axp803.dtsi
+++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi
@@ -49,6 +49,39 @@
interrupt-controller;
#interrupt-cells = <1>;
+ ac_power_supply: ac-power-supply {
+ compatible = "x-powers,axp803-ac-power-supply",
+ "x-powers,axp813-ac-power-supply";
+ status = "disabled";
+ };
+
+ axp_adc: adc {
+ compatible = "x-powers,axp803-adc", "x-powers,axp813-adc";
+ #io-channel-cells = <1>;
+ };
+
+ axp_gpio: gpio {
+ compatible = "x-powers,axp803-gpio", "x-powers,axp813-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio0_ldo: gpio0-ldo {
+ pins = "GPIO0";
+ function = "ldo";
+ };
+
+ gpio1_ldo: gpio1-ldo {
+ pins = "GPIO1";
+ function = "ldo";
+ };
+ };
+
+ battery_power_supply: battery-power-supply {
+ compatible = "x-powers,axp803-battery-power-supply",
+ "x-powers,axp813-battery-power-supply";
+ status = "disabled";
+ };
+
regulators {
/* Default work frequency for buck regulators */
x-powers,dcdc-freq = <3000>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index ef1c904..83e30e0 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -97,6 +97,19 @@
};
};
+&codec {
+ status = "okay";
+};
+
+&codec_analog {
+ hpvcc-supply = <®_eldo1>;
+ status = "okay";
+};
+
+&dai {
+ status = "okay";
+};
+
&de {
status = "okay";
};
@@ -326,6 +339,22 @@
vcc-hdmi-supply = <®_dldo1>;
};
+&sound {
+ status = "okay";
+ simple-audio-card,widgets = "Headphone", "Headphone Jack",
+ "Microphone", "Microphone Jack",
+ "Microphone", "Onboard Microphone";
+ simple-audio-card,routing =
+ "Left DAC", "AIF1 Slot 0 Left",
+ "Right DAC", "AIF1 Slot 0 Right",
+ "AIF1 Slot 0 Left ADC", "Left ADC",
+ "AIF1 Slot 0 Right ADC", "Right ADC",
+ "Headphone Jack", "HP",
+ "MIC2", "Microphone Jack",
+ "Onboard Microphone", "MBIAS",
+ "MIC1", "Onboard Microphone";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index c077b6c..216f2f5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -75,6 +75,19 @@
};
};
+&codec {
+ status = "okay";
+};
+
+&codec_analog {
+ hpvcc-supply = <®_eldo1>;
+ status = "okay";
+};
+
+&dai {
+ status = "okay";
+};
+
&de {
status = "okay";
};
@@ -259,6 +272,20 @@
vcc-hdmi-supply = <®_dldo1>;
};
+&sound {
+ simple-audio-card,aux-devs = <&codec_analog>;
+ simple-audio-card,widgets = "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Left DAC", "AIF1 Slot 0 Left",
+ "Right DAC", "AIF1 Slot 0 Right",
+ "Headphone Jack", "HP",
+ "AIF1 Slot 0 Left ADC", "Left ADC",
+ "AIF1 Slot 0 Right ADC", "Right ADC",
+ "MIC2", "Microphone Jack";
+ status = "okay";
+};
+
/* On Euler connector */
&spdif {
status = "disabled";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index 77fac84..d22736a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -22,12 +22,22 @@
ethernet0 = &rtl8723cs;
};
+ vdd_bl: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "bl-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+ enable-active-high;
+ };
+
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 50000 0>;
brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
default-brightness-level = <2>;
enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+ power-supply = <&vdd_bl>;
};
chosen {
@@ -64,6 +74,32 @@
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
+
+ speaker_amp: audio-amplifier {
+ compatible = "simple-audio-amplifier";
+ /*
+ * TODO This is actually a fixed regulator controlled by
+ * the GPIO line on the PMIC. This should be corrected
+ * once GPIO support is added for this PMIC.
+ */
+ VCC-supply = <®_ldo_io0>;
+ enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+ sound-name-prefix = "Speaker Amp";
+ };
+
+};
+
+&codec {
+ status = "okay";
+};
+
+&codec_analog {
+ hpvcc-supply = <®_eldo1>;
+ status = "okay";
+};
+
+&dai {
+ status = "okay";
};
&ehci0 {
@@ -148,6 +184,14 @@
#include "axp803.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
®_aldo1 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
@@ -267,6 +311,29 @@
vcc-hdmi-supply = <®_dldo1>;
};
+&sound {
+ status = "okay";
+ simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+ simple-audio-card,widgets = "Microphone", "Internal Microphone Left",
+ "Microphone", "Internal Microphone Right",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Internal Speaker";
+ simple-audio-card,routing =
+ "Left DAC", "AIF1 Slot 0 Left",
+ "Right DAC", "AIF1 Slot 0 Right",
+ "Speaker Amp INL", "LINEOUT",
+ "Speaker Amp INR", "LINEOUT",
+ "Internal Speaker", "Speaker Amp OUTL",
+ "Internal Speaker", "Speaker Amp OUTR",
+ "Headphone Jack", "HP",
+ "AIF1 Slot 0 Left ADC", "Left ADC",
+ "AIF1 Slot 0 Right ADC", "Right ADC",
+ "Internal Microphone Left", "MBIAS",
+ "MIC1", "Internal Microphone Left",
+ "Internal Microphone Right", "HBIAS",
+ "MIC2", "Internal Microphone Right";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index 53fcc90..e6fb968 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -80,6 +80,26 @@
};
};
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
+&codec {
+ status = "okay";
+};
+
+&codec_analog {
+ status = "okay";
+};
+
+&dai {
+ status = "okay";
+};
+
&de {
status = "okay";
};
@@ -164,6 +184,20 @@
vcc-hdmi-supply = <®_dldo1>;
};
+&sound {
+ simple-audio-card,aux-devs = <&codec_analog>;
+ simple-audio-card,widgets = "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Left DAC", "AIF1 Slot 0 Left",
+ "Right DAC", "AIF1 Slot 0 Right",
+ "Headphone Jack", "HP",
+ "AIF1 Slot 0 Left ADC", "Left ADC",
+ "AIF1 Slot 0 Right ADC", "Right ADC",
+ "MIC2", "Microphone Jack";
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
index 6723b86..d2651f2 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
@@ -47,6 +47,10 @@
#include <dt-bindings/gpio/gpio.h>
+&codec_analog {
+ hpvcc-supply = <®_eldo1>;
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index f3a66f8..837a03d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -139,15 +139,7 @@
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
- clock-output-names = "osc32k";
- };
-
- iosc: internal-osc-clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <16000000>;
- clock-accuracy = <300000000>;
- clock-output-names = "iosc";
+ clock-output-names = "ext-osc32k";
};
psci {
@@ -155,6 +147,30 @@
method = "smc";
};
+ sound: sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sun50i-a64-audio";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&cpudai>;
+ simple-audio-card,bitclock-master = <&cpudai>;
+ simple-audio-card,mclk-fs = <128>;
+ simple-audio-card,aux-devs = <&codec_analog>;
+ simple-audio-card,routing =
+ "Left DAC", "AIF1 Slot 0 Left",
+ "Right DAC", "AIF1 Slot 0 Right",
+ "AIF1 Slot 0 Left ADC", "Left ADC",
+ "AIF1 Slot 0 Right ADC", "Right ADC";
+ status = "disabled";
+
+ cpudai: simple-audio-card,cpu {
+ sound-dai = <&dai>;
+ };
+
+ link_codec: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+
sound_spdif {
compatible = "simple-audio-card";
simple-audio-card,name = "On-board SPDIF";
@@ -277,6 +293,20 @@
reg = <0x0000 0x28000>;
};
};
+
+ sram_c1: sram@1d00000 {
+ compatible = "mmio-sram";
+ reg = <0x01d00000 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x01d00000 0x40000>;
+
+ ve_sram: sram-section@0 {
+ compatible = "allwinner,sun50i-a64-sram-c1",
+ "allwinner,sun4i-a10-sram-c1";
+ reg = <0x000000 0x40000>;
+ };
+ };
};
dma: dma-controller@1c02000 {
@@ -359,6 +389,17 @@
};
};
+ video-codec@1c0e000 {
+ compatible = "allwinner,sun50i-h5-video-engine";
+ reg = <0x01c0e000 0x1000>;
+ clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_BUS_VE>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ allwinner,sram = <&ve_sram 1>;
+ };
+
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun50i-a64-mmc";
reg = <0x01c0f000 0x1000>;
@@ -490,7 +531,7 @@
ccu: clock@1c20000 {
compatible = "allwinner,sun50i-a64-ccu";
reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&osc32k>;
+ clocks = <&osc24M>, <&rtc 0>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
@@ -665,6 +706,30 @@
status = "disabled";
};
+ dai: dai@1c22c00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun50i-a64-codec-i2s";
+ reg = <0x01c22c00 0x200>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+ clock-names = "apb", "mod";
+ resets = <&ccu RST_BUS_CODEC>;
+ reset-names = "rst";
+ dmas = <&dma 15>, <&dma 15>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ codec: codec@1c22e00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-a33-codec";
+ reg = <0x01c22e00 0x600>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+ clock-names = "bus", "mod";
+ status = "disabled";
+ };
+
uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
@@ -807,6 +872,28 @@
};
};
+ mali: gpu@1c40000 {
+ compatible = "allwinner,sun50i-a64-mali", "arm,mali-400";
+ reg = <0x01c40000 0x10000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1",
+ "pmu";
+ clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+ clock-names = "bus", "core";
+ resets = <&ccu RST_BUS_GPU>;
+ };
+
gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
@@ -874,11 +961,12 @@
};
rtc: rtc@1f00000 {
- compatible = "allwinner,sun6i-a31-rtc";
- reg = <0x01f00000 0x54>;
+ compatible = "allwinner,sun50i-a64-rtc",
+ "allwinner,sun8i-h3-rtc";
+ reg = <0x01f00000 0x400>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- clock-output-names = "rtc-osc32k", "rtc-osc32k-out";
+ clock-output-names = "osc32k", "osc32k-out", "iosc";
clocks = <&osc32k>;
#clock-cells = <1>;
};
@@ -895,13 +983,18 @@
r_ccu: clock@1f01400 {
compatible = "allwinner,sun50i-a64-r-ccu";
reg = <0x01f01400 0x100>;
- clocks = <&osc24M>, <&osc32k>, <&iosc>,
- <&ccu 11>;
+ clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu 11>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
#reset-cells = <1>;
};
+ codec_analog: codec-analog@1f015c0 {
+ compatible = "allwinner,sun50i-a64-codec-analog";
+ reg = <0x01f015c0 0x4>;
+ status = "disabled";
+ };
+
r_i2c: i2c@1f02400 {
compatible = "allwinner,sun50i-a64-i2c",
"allwinner,sun6i-a31-i2c";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index b41dc1a..fe731b3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -172,3 +172,7 @@
<GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
compatible = "allwinner,sun50i-h5-pinctrl";
};
+
+&rtc {
+ compatible = "allwinner,sun50i-h5-rtc";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
new file mode 100644
index 0000000..e098a24
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2018 Jagan Teki <[email protected]>
+ */
+
+#include "sun50i-h6-orangepi.dtsi"
+
+/ {
+ model = "OrangePi Lite2";
+ compatible = "xunlong,orangepi-lite2", "allwinner,sun50i-h6";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
index 0612c19..12e1756 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
@@ -4,147 +4,9 @@
* Author: Jagan Teki <[email protected]>
*/
-/dts-v1/;
-
-#include "sun50i-h6.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
+#include "sun50i-h6-orangepi.dtsi"
/ {
model = "OrangePi One Plus";
compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
- vmmc-supply = <®_cldo1>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
- bus-width = <4>;
- status = "okay";
-};
-
-&r_i2c {
- status = "okay";
-
- axp805: pmic@36 {
- compatible = "x-powers,axp805", "x-powers,axp806";
- reg = <0x36>;
- interrupt-parent = <&r_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
- #interrupt-cells = <1>;
- x-powers,self-working-mode;
-
- regulators {
- reg_aldo1: aldo1 {
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-pl";
- };
-
- reg_aldo2: aldo2 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-ac200";
- };
-
- reg_aldo3: aldo3 {
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc25-dram";
- };
-
- reg_bldo1: bldo1 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc-bias-pll";
- };
-
- reg_bldo2: bldo2 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc-efuse-pcie-hdmi-io";
- };
-
- reg_bldo3: bldo3 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc-dcxoio";
- };
-
- bldo4 {
- /* unused */
- };
-
- reg_cldo1: cldo1 {
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-3v3";
- };
-
- reg_cldo2: cldo2 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-wifi-1";
- };
-
- reg_cldo3: cldo3 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-wifi-2";
- };
-
- reg_dcdca: dcdca {
- regulator-always-on;
- regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <1080000>;
- regulator-name = "vdd-cpu";
- };
-
- reg_dcdcc: dcdcc {
- regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <1080000>;
- regulator-name = "vdd-gpu";
- };
-
- reg_dcdcd: dcdcd {
- regulator-always-on;
- regulator-min-microvolt = <960000>;
- regulator-max-microvolt = <960000>;
- regulator-name = "vdd-sys";
- };
-
- reg_dcdce: dcdce {
- regulator-always-on;
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-name = "vcc-dram";
- };
-
- sw {
- /* unused */
- };
- };
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_ph_pins>;
- status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
new file mode 100644
index 0000000..b2526dac
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2018 Amarula Solutions
+ * Author: Jagan Teki <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "OrangePi One Plus";
+ compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "orangepi:red:power";
+ gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+ default-state = "on";
+ };
+
+ status {
+ label = "orangepi:green:status";
+ gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+ };
+ };
+
+ reg_vcc5v: vcc5v {
+ /* board wide 5V supply directly from the DC jack */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <®_cldo1>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp805: pmic@36 {
+ compatible = "x-powers,axp805", "x-powers,axp806";
+ reg = <0x36>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ x-powers,self-working-mode;
+ vina-supply = <®_vcc5v>;
+ vinb-supply = <®_vcc5v>;
+ vinc-supply = <®_vcc5v>;
+ vind-supply = <®_vcc5v>;
+ vine-supply = <®_vcc5v>;
+ aldoin-supply = <®_vcc5v>;
+ bldoin-supply = <®_vcc5v>;
+ cldoin-supply = <®_vcc5v>;
+
+ regulators {
+ reg_aldo1: aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pl";
+ };
+
+ reg_aldo2: aldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-ac200";
+ };
+
+ reg_aldo3: aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc25-dram";
+ };
+
+ reg_bldo1: bldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-bias-pll";
+ };
+
+ reg_bldo2: bldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-efuse-pcie-hdmi-io";
+ };
+
+ reg_bldo3: bldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-dcxoio";
+ };
+
+ bldo4 {
+ /* unused */
+ };
+
+ reg_cldo1: cldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+ };
+
+ reg_cldo2: cldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+ };
+
+ reg_cldo3: cldo3 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+ };
+
+ reg_dcdca: dcdca {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1080000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdcc: dcdcc {
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1080000>;
+ regulator-name = "vdd-gpu";
+ };
+
+ reg_dcdcd: dcdcd {
+ regulator-always-on;
+ regulator-min-microvolt = <960000>;
+ regulator-max-microvolt = <960000>;
+ regulator-name = "vdd-sys";
+ };
+
+ reg_dcdce: dcdce {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-dram";
+ };
+
+ sw {
+ /* unused */
+ };
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
+
+&usb2otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb2phy {
+ usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */
+ usb0_vbus-supply = <®_vcc5v>;
+ usb3_vbus-supply = <®_vcc5v>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 48daec7..bdb8470 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -14,6 +14,7 @@
compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
aliases {
+ ethernet0 = &emac;
serial0 = &uart0;
};
@@ -21,6 +22,17 @@
stdout-path = "serial0:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
@@ -39,6 +51,56 @@
gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
};
};
+
+ reg_usb_vbus: vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <100000>;
+ gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ext_rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ phy-supply = <®_aldo2>;
+ allwinner,rx-delay-ps = <200>;
+ allwinner,tx-delay-ps = <200>;
+ status = "okay";
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&de {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
};
&mmc0 {
@@ -61,6 +123,14 @@
status = "okay";
};
+&ohci0 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
&r_i2c {
status = "okay";
@@ -85,6 +155,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-ac200";
+ regulator-enable-ramp-delay = <100000>;
};
reg_aldo3: aldo3 {
@@ -185,3 +256,14 @@
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
+
+&usb2otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb2phy {
+ usb0_vbus-supply = <®_usb_vbus>;
+ usb3_vbus-supply = <®_usb_vbus>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 040828d..d93a7ad 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -6,8 +6,11 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun50i-h6-ccu.h>
#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-tcon-top.h>
#include <dt-bindings/reset/sun50i-h6-ccu.h>
#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
/ {
interrupt-parent = <&gic>;
@@ -47,6 +50,12 @@
};
};
+ de: display-engine {
+ compatible = "allwinner,sun50i-h6-display-engine";
+ allwinner,pipelines = <&mixer0>;
+ status = "disabled";
+ };
+
iosc: internal-osc-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -92,6 +101,51 @@
#size-cells = <1>;
ranges;
+ display-engine@1000000 {
+ compatible = "allwinner,sun50i-h6-de3",
+ "allwinner,sun50i-a64-de2";
+ reg = <0x1000000 0x400000>;
+ allwinner,sram = <&de2_sram 1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1000000 0x400000>;
+
+ display_clocks: clock@0 {
+ compatible = "allwinner,sun50i-h6-de3-clk";
+ reg = <0x0 0x10000>;
+ clocks = <&ccu CLK_DE>,
+ <&ccu CLK_BUS_DE>;
+ clock-names = "mod",
+ "bus";
+ resets = <&ccu RST_BUS_DE>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ mixer0: mixer@100000 {
+ compatible = "allwinner,sun50i-h6-de3-mixer-0";
+ reg = <0x100000 0x100000>;
+ clocks = <&display_clocks CLK_BUS_MIXER0>,
+ <&display_clocks CLK_MIXER0>;
+ clock-names = "bus",
+ "mod";
+ resets = <&display_clocks RST_MIXER0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mixer0_out: port@1 {
+ reg = <1>;
+
+ mixer0_out_tcon_top_mixer0: endpoint {
+ remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
+ };
+ };
+ };
+ };
+ };
+
syscon: syscon@3000000 {
compatible = "allwinner,sun50i-h6-system-control",
"allwinner,sun50i-a64-system-control";
@@ -149,6 +203,19 @@
interrupt-controller;
#interrupt-cells = <3>;
+ ext_rgmii_pins: rgmii_pins {
+ pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+ "PD5", "PD7", "PD8", "PD9", "PD10",
+ "PD11", "PD12", "PD13", "PD19", "PD20";
+ function = "emac";
+ drive-strength = <40>;
+ };
+
+ hdmi_pins: hdmi-pins {
+ pins = "PH8", "PH9", "PH10";
+ function = "hdmi";
+ };
+
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
@@ -258,6 +325,250 @@
status = "disabled";
};
+ emac: ethernet@5020000 {
+ compatible = "allwinner,sun50i-h6-emac",
+ "allwinner,sun50i-a64-emac";
+ syscon = <&syscon>;
+ reg = <0x05020000 0x10000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ resets = <&ccu RST_BUS_EMAC>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu CLK_BUS_EMAC>;
+ clock-names = "stmmaceth";
+ status = "disabled";
+
+ mdio: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ usb2otg: usb@5100000 {
+ compatible = "allwinner,sun50i-h6-musb",
+ "allwinner,sun8i-a33-musb";
+ reg = <0x05100000 0x0400>;
+ clocks = <&ccu CLK_BUS_OTG>;
+ resets = <&ccu RST_BUS_OTG>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc";
+ phys = <&usb2phy 0>;
+ phy-names = "usb";
+ extcon = <&usb2phy 0>;
+ status = "disabled";
+ };
+
+ usb2phy: phy@5100400 {
+ compatible = "allwinner,sun50i-h6-usb-phy";
+ reg = <0x05100400 0x24>,
+ <0x05101800 0x4>,
+ <0x05311800 0x4>;
+ reg-names = "phy_ctrl",
+ "pmu0",
+ "pmu3";
+ clocks = <&ccu CLK_USB_PHY0>,
+ <&ccu CLK_USB_PHY3>;
+ clock-names = "usb0_phy",
+ "usb3_phy";
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY3>;
+ reset-names = "usb0_reset",
+ "usb3_reset";
+ status = "disabled";
+ #phy-cells = <1>;
+ };
+
+ ehci0: usb@5101000 {
+ compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
+ reg = <0x05101000 0x100>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI0>,
+ <&ccu CLK_BUS_EHCI0>,
+ <&ccu CLK_USB_OHCI0>;
+ resets = <&ccu RST_BUS_OHCI0>,
+ <&ccu RST_BUS_EHCI0>;
+ status = "disabled";
+ };
+
+ ohci0: usb@5101400 {
+ compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
+ reg = <0x05101400 0x100>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI0>,
+ <&ccu CLK_USB_OHCI0>;
+ resets = <&ccu RST_BUS_OHCI0>;
+ status = "disabled";
+ };
+
+ ehci3: usb@5311000 {
+ compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
+ reg = <0x05311000 0x100>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI3>,
+ <&ccu CLK_BUS_EHCI3>,
+ <&ccu CLK_USB_OHCI3>;
+ resets = <&ccu RST_BUS_OHCI3>,
+ <&ccu RST_BUS_EHCI3>;
+ phys = <&usb2phy 3>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci3: usb@5311400 {
+ compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
+ reg = <0x05311400 0x100>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI3>,
+ <&ccu CLK_USB_OHCI3>;
+ resets = <&ccu RST_BUS_OHCI3>;
+ phys = <&usb2phy 3>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ hdmi: hdmi@6000000 {
+ compatible = "allwinner,sun50i-h6-dw-hdmi";
+ reg = <0x06000000 0x10000>;
+ reg-io-width = <1>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
+ <&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>,
+ <&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>;
+ clock-names = "iahb", "isfr", "tmds", "cec", "hdcp",
+ "hdcp-bus";
+ resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>;
+ reset-names = "ctrl", "hdcp";
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi-phy";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
+
+ hdmi_in_tcon_top: endpoint {
+ remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
+ };
+ };
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ hdmi_phy: hdmi-phy@6010000 {
+ compatible = "allwinner,sun50i-h6-hdmi-phy";
+ reg = <0x06010000 0x10000>;
+ clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_HDMI>;
+ reset-names = "phy";
+ #phy-cells = <0>;
+ };
+
+ tcon_top: tcon-top@6510000 {
+ compatible = "allwinner,sun50i-h6-tcon-top";
+ reg = <0x06510000 0x1000>;
+ clocks = <&ccu CLK_BUS_TCON_TOP>,
+ <&ccu CLK_TCON_TV0>;
+ clock-names = "bus",
+ "tcon-tv0";
+ clock-output-names = "tcon-top-tv0";
+ resets = <&ccu RST_BUS_TCON_TOP>;
+ reset-names = "rst";
+ #clock-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon_top_mixer0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tcon_top_mixer0_in_mixer0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&mixer0_out_tcon_top_mixer0>;
+ };
+ };
+
+ tcon_top_mixer0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tcon_top_mixer0_out_tcon_tv: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&tcon_tv_in_tcon_top_mixer0>;
+ };
+ };
+
+ tcon_top_hdmi_in: port@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ tcon_top_hdmi_in_tcon_tv: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon_tv_out_tcon_top>;
+ };
+ };
+
+ tcon_top_hdmi_out: port@5 {
+ reg = <5>;
+
+ tcon_top_hdmi_out_hdmi: endpoint {
+ remote-endpoint = <&hdmi_in_tcon_top>;
+ };
+ };
+ };
+ };
+
+ tcon_tv: lcd-controller@6515000 {
+ compatible = "allwinner,sun50i-h6-tcon-tv",
+ "allwinner,sun8i-r40-tcon-tv";
+ reg = <0x06515000 0x1000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_TCON_TV0>,
+ <&tcon_top CLK_TCON_TOP_TV0>;
+ clock-names = "ahb",
+ "tcon-ch1";
+ resets = <&ccu RST_BUS_TCON_TV0>;
+ reset-names = "lcd";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon_tv_in: port@0 {
+ reg = <0>;
+
+ tcon_tv_in_tcon_top_mixer0: endpoint {
+ remote-endpoint = <&tcon_top_mixer0_out_tcon_tv>;
+ };
+ };
+
+ tcon_tv_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tcon_tv_out_tcon_top: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon_top_hdmi_in_tcon_tv>;
+ };
+ };
+ };
+ };
+
r_ccu: clock@7010000 {
compatible = "allwinner,sun50i-h6-r-ccu";
reg = <0x07010000 0x400>;
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index 8253a1a..09b5f61a 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -139,6 +139,7 @@
clock-names = "stmmaceth";
tx-fifo-depth = <16384>;
rx-fifo-depth = <16384>;
+ snps,multicast-filter-bins = <256>;
status = "disabled";
};
@@ -154,6 +155,7 @@
clock-names = "stmmaceth";
tx-fifo-depth = <16384>;
rx-fifo-depth = <16384>;
+ snps,multicast-filter-bins = <256>;
status = "disabled";
};
@@ -169,6 +171,7 @@
clock-names = "stmmaceth";
tx-fifo-depth = <16384>;
rx-fifo-depth = <16384>;
+ snps,multicast-filter-bins = <256>;
status = "disabled";
};
@@ -308,9 +311,8 @@
rst: rstmgr@ffd11000 {
#reset-cells = <1>;
- compatible = "altr,rst-mgr";
+ compatible = "altr,stratix10-rst-mgr";
reg = <0xffd11000 0x1000>;
- altr,modrst-offset = <0x20>;
};
spi0: spi@ffda4000 {
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index c31f29d6..f12efa2 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -11,6 +11,7 @@
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-libretech-ac.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
@@ -18,6 +19,7 @@
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 18778ad..7759fda 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -60,7 +60,7 @@
serial1 = &uart_A;
};
- linein: audio-codec@0 {
+ linein: audio-codec-0 {
#sound-dai-cells = <0>;
compatible = "everest,es7241";
VDDA-supply = <&vcc_3v3>;
@@ -70,7 +70,7 @@
sound-name-prefix = "Linein";
};
- lineout: audio-codec@1 {
+ lineout: audio-codec-1 {
#sound-dai-cells = <0>;
compatible = "everest,es7154";
VDD-supply = <&vcc_3v3>;
@@ -79,14 +79,14 @@
sound-name-prefix = "Lineout";
};
- spdif_dit: audio-codec@2 {
+ spdif_dit: audio-codec-2 {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
status = "okay";
sound-name-prefix = "DIT";
};
- dmics: audio-codec@3 {
+ dmics: audio-codec-3 {
#sound-dai-cells = <0>;
compatible = "dmic-codec";
num-channels = <7>;
@@ -272,31 +272,31 @@
<393216000>;
status = "okay";
- dai-link@0 {
+ dai-link-0 {
sound-dai = <&frddr_a>;
};
- dai-link@1 {
+ dai-link-1 {
sound-dai = <&frddr_b>;
};
- dai-link@2 {
+ dai-link-2 {
sound-dai = <&frddr_c>;
};
- dai-link@3 {
+ dai-link-3 {
sound-dai = <&toddr_a>;
};
- dai-link@4 {
+ dai-link-4 {
sound-dai = <&toddr_b>;
};
- dai-link@5 {
+ dai-link-5 {
sound-dai = <&toddr_c>;
};
- dai-link@6 {
+ dai-link-6 {
sound-dai = <&tdmif_c>;
dai-format = "i2s";
dai-tdm-slot-tx-mask-2 = <1 1>;
@@ -317,7 +317,7 @@
};
- dai-link@7 {
+ dai-link-7 {
sound-dai = <&spdifout>;
codec {
@@ -325,7 +325,7 @@
};
};
- dai-link@8 {
+ dai-link-8 {
sound-dai = <&pdm>;
codec {
@@ -543,8 +543,14 @@
&uart_A {
status = "okay";
- pinctrl-0 = <&uart_a_pins>;
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
+ };
};
&uart_AO {
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index df017db..5f512c9 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -20,7 +20,7 @@
#address-cells = <2>;
#size-cells = <2>;
- tdmif_a: audio-controller@0 {
+ tdmif_a: audio-controller-0 {
compatible = "amlogic,axg-tdm-iface";
#sound-dai-cells = <0>;
sound-name-prefix = "TDM_A";
@@ -31,7 +31,7 @@
status = "disabled";
};
- tdmif_b: audio-controller@1 {
+ tdmif_b: audio-controller-1 {
compatible = "amlogic,axg-tdm-iface";
#sound-dai-cells = <0>;
sound-name-prefix = "TDM_B";
@@ -42,7 +42,7 @@
status = "disabled";
};
- tdmif_c: audio-controller@2 {
+ tdmif_c: audio-controller-2 {
compatible = "amlogic,axg-tdm-iface";
#sound-dai-cells = <0>;
sound-name-prefix = "TDM_C";
@@ -79,6 +79,7 @@
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&l2>;
+ clocks = <&scpi_dvfs 0>;
};
cpu1: cpu@1 {
@@ -87,6 +88,7 @@
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&l2>;
+ clocks = <&scpi_dvfs 0>;
};
cpu2: cpu@2 {
@@ -95,6 +97,7 @@
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&l2>;
+ clocks = <&scpi_dvfs 0>;
};
cpu3: cpu@3 {
@@ -103,6 +106,7 @@
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&l2>;
+ clocks = <&scpi_dvfs 0>;
};
l2: l2-cache0 {
@@ -110,6 +114,10 @@
};
};
+ sm: secure-monitor {
+ compatible = "amlogic,meson-gxbb-sm";
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
@@ -133,6 +141,28 @@
};
};
+ scpi {
+ compatible = "arm,scpi-pre-1.0";
+ mboxes = <&mailbox 1 &mailbox 2>;
+ shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+
+ scpi_clocks: clocks {
+ compatible = "arm,scpi-clocks";
+
+ scpi_dvfs: clock-controller {
+ compatible = "arm,scpi-dvfs-clocks";
+ #clock-cells = <1>;
+ clock-indices = <0>;
+ clock-output-names = "vcpu";
+ };
+ };
+
+ scpi_sensors: sensors {
+ compatible = "amlogic,meson-gxbb-scpi-sensors";
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -200,6 +230,7 @@
groups = "i2c0_sck",
"i2c0_sda";
function = "i2c0";
+ bias-disable;
};
};
@@ -208,6 +239,7 @@
groups = "i2c1_sck_x",
"i2c1_sda_x";
function = "i2c1";
+ bias-disable;
};
};
@@ -216,6 +248,7 @@
groups = "i2c1_sck_z",
"i2c1_sda_z";
function = "i2c1";
+ bias-disable;
};
};
@@ -224,6 +257,7 @@
groups = "i2c2_sck_a",
"i2c2_sda_a";
function = "i2c2";
+ bias-disable;
};
};
@@ -232,6 +266,7 @@
groups = "i2c2_sck_x",
"i2c2_sda_x";
function = "i2c2";
+ bias-disable;
};
};
@@ -240,6 +275,7 @@
groups = "i2c3_sda_a6",
"i2c3_sck_a7";
function = "i2c3";
+ bias-disable;
};
};
@@ -248,6 +284,7 @@
groups = "i2c3_sda_a12",
"i2c3_sck_a13";
function = "i2c3";
+ bias-disable;
};
};
@@ -256,6 +293,7 @@
groups = "i2c3_sda_a19",
"i2c3_sck_a20";
function = "i2c3";
+ bias-disable;
};
};
@@ -273,6 +311,7 @@
"emmc_cmd",
"emmc_ds";
function = "emmc";
+ bias-disable;
};
};
@@ -280,9 +319,6 @@
mux {
groups = "BOOT_8";
function = "gpio_periphs";
- };
- cfg-pull-down {
- pins = "BOOT_8";
bias-pull-down;
};
};
@@ -304,6 +340,7 @@
"eth_txd2_rgmii",
"eth_txd3_rgmii";
function = "eth";
+ bias-disable;
};
};
@@ -324,6 +361,7 @@
"eth_txd2_rgmii",
"eth_txd3_rgmii";
function = "eth";
+ bias-disable;
};
};
@@ -339,6 +377,7 @@
"eth_txd0_x",
"eth_txd1_x";
function = "eth";
+ bias-disable;
};
};
@@ -354,6 +393,7 @@
"eth_txd0_y",
"eth_txd1_y";
function = "eth";
+ bias-disable;
};
};
@@ -361,6 +401,7 @@
mux {
groups = "mclk_b";
function = "mclk_b";
+ bias-disable;
};
};
@@ -368,6 +409,7 @@
mux {
groups = "mclk_c";
function = "mclk_c";
+ bias-disable;
};
};
@@ -375,6 +417,7 @@
mux {
groups = "pdm_dclk_a14";
function = "pdm";
+ bias-disable;
};
};
@@ -382,6 +425,7 @@
mux {
groups = "pdm_dclk_a19";
function = "pdm";
+ bias-disable;
};
};
@@ -389,6 +433,7 @@
mux {
groups = "pdm_din0";
function = "pdm";
+ bias-disable;
};
};
@@ -396,6 +441,7 @@
mux {
groups = "pdm_din1";
function = "pdm";
+ bias-disable;
};
};
@@ -403,6 +449,7 @@
mux {
groups = "pdm_din2";
function = "pdm";
+ bias-disable;
};
};
@@ -410,6 +457,7 @@
mux {
groups = "pdm_din3";
function = "pdm";
+ bias-disable;
};
};
@@ -417,6 +465,7 @@
mux {
groups = "pwm_a_a";
function = "pwm_a";
+ bias-disable;
};
};
@@ -424,6 +473,7 @@
mux {
groups = "pwm_a_x18";
function = "pwm_a";
+ bias-disable;
};
};
@@ -431,6 +481,7 @@
mux {
groups = "pwm_a_x20";
function = "pwm_a";
+ bias-disable;
};
};
@@ -438,6 +489,7 @@
mux {
groups = "pwm_a_z";
function = "pwm_a";
+ bias-disable;
};
};
@@ -445,6 +497,7 @@
mux {
groups = "pwm_b_a";
function = "pwm_b";
+ bias-disable;
};
};
@@ -452,6 +505,7 @@
mux {
groups = "pwm_b_x";
function = "pwm_b";
+ bias-disable;
};
};
@@ -459,6 +513,7 @@
mux {
groups = "pwm_b_z";
function = "pwm_b";
+ bias-disable;
};
};
@@ -466,6 +521,7 @@
mux {
groups = "pwm_c_a";
function = "pwm_c";
+ bias-disable;
};
};
@@ -473,6 +529,7 @@
mux {
groups = "pwm_c_x10";
function = "pwm_c";
+ bias-disable;
};
};
@@ -480,6 +537,7 @@
mux {
groups = "pwm_c_x17";
function = "pwm_c";
+ bias-disable;
};
};
@@ -487,6 +545,7 @@
mux {
groups = "pwm_d_x11";
function = "pwm_d";
+ bias-disable;
};
};
@@ -494,6 +553,7 @@
mux {
groups = "pwm_d_x16";
function = "pwm_d";
+ bias-disable;
};
};
@@ -506,6 +566,7 @@
"sdio_cmd",
"sdio_clk";
function = "sdio";
+ bias-disable;
};
};
@@ -513,9 +574,6 @@
mux {
groups = "GPIOX_4";
function = "gpio_periphs";
- };
- cfg-pull-down {
- pins = "GPIOX_4";
bias-pull-down;
};
};
@@ -524,6 +582,7 @@
mux {
groups = "spdif_in_z";
function = "spdif_in";
+ bias-disable;
};
};
@@ -531,6 +590,7 @@
mux {
groups = "spdif_in_a1";
function = "spdif_in";
+ bias-disable;
};
};
@@ -538,6 +598,7 @@
mux {
groups = "spdif_in_a7";
function = "spdif_in";
+ bias-disable;
};
};
@@ -545,6 +606,7 @@
mux {
groups = "spdif_in_a19";
function = "spdif_in";
+ bias-disable;
};
};
@@ -552,6 +614,7 @@
mux {
groups = "spdif_in_a20";
function = "spdif_in";
+ bias-disable;
};
};
@@ -559,6 +622,7 @@
mux {
groups = "spdif_out_a1";
function = "spdif_out";
+ bias-disable;
};
};
@@ -566,6 +630,7 @@
mux {
groups = "spdif_out_a11";
function = "spdif_out";
+ bias-disable;
};
};
@@ -573,6 +638,7 @@
mux {
groups = "spdif_out_a19";
function = "spdif_out";
+ bias-disable;
};
};
@@ -580,6 +646,7 @@
mux {
groups = "spdif_out_a20";
function = "spdif_out";
+ bias-disable;
};
};
@@ -587,6 +654,7 @@
mux {
groups = "spdif_out_z";
function = "spdif_out";
+ bias-disable;
};
};
@@ -596,6 +664,7 @@
"spi0_mosi",
"spi0_clk";
function = "spi0";
+ bias-disable;
};
};
@@ -603,6 +672,7 @@
mux {
groups = "spi0_ss0";
function = "spi0";
+ bias-disable;
};
};
@@ -610,6 +680,7 @@
mux {
groups = "spi0_ss1";
function = "spi0";
+ bias-disable;
};
};
@@ -617,6 +688,7 @@
mux {
groups = "spi0_ss2";
function = "spi0";
+ bias-disable;
};
};
@@ -626,6 +698,7 @@
"spi1_mosi_a",
"spi1_clk_a";
function = "spi1";
+ bias-disable;
};
};
@@ -633,6 +706,7 @@
mux {
groups = "spi1_ss0_a";
function = "spi1";
+ bias-disable;
};
};
@@ -640,6 +714,7 @@
mux {
groups = "spi1_ss1";
function = "spi1";
+ bias-disable;
};
};
@@ -649,6 +724,7 @@
"spi1_mosi_x",
"spi1_clk_x";
function = "spi1";
+ bias-disable;
};
};
@@ -656,6 +732,7 @@
mux {
groups = "spi1_ss0_x";
function = "spi1";
+ bias-disable;
};
};
@@ -663,6 +740,7 @@
mux {
groups = "tdma_din0";
function = "tdma";
+ bias-disable;
};
};
@@ -670,6 +748,7 @@
mux {
groups = "tdma_dout0_x14";
function = "tdma";
+ bias-disable;
};
};
@@ -677,6 +756,7 @@
mux {
groups = "tdma_dout0_x15";
function = "tdma";
+ bias-disable;
};
};
@@ -684,6 +764,7 @@
mux {
groups = "tdma_dout1";
function = "tdma";
+ bias-disable;
};
};
@@ -691,6 +772,7 @@
mux {
groups = "tdma_din1";
function = "tdma";
+ bias-disable;
};
};
@@ -698,6 +780,7 @@
mux {
groups = "tdma_fs";
function = "tdma";
+ bias-disable;
};
};
@@ -705,6 +788,7 @@
mux {
groups = "tdma_fs_slv";
function = "tdma";
+ bias-disable;
};
};
@@ -712,6 +796,7 @@
mux {
groups = "tdma_sclk";
function = "tdma";
+ bias-disable;
};
};
@@ -719,6 +804,7 @@
mux {
groups = "tdma_sclk_slv";
function = "tdma";
+ bias-disable;
};
};
@@ -726,6 +812,7 @@
mux {
groups = "tdmb_din0";
function = "tdmb";
+ bias-disable;
};
};
@@ -733,6 +820,7 @@
mux {
groups = "tdmb_din1";
function = "tdmb";
+ bias-disable;
};
};
@@ -740,6 +828,7 @@
mux {
groups = "tdmb_din2";
function = "tdmb";
+ bias-disable;
};
};
@@ -747,6 +836,7 @@
mux {
groups = "tdmb_din3";
function = "tdmb";
+ bias-disable;
};
};
@@ -754,6 +844,7 @@
mux {
groups = "tdmb_dout0";
function = "tdmb";
+ bias-disable;
};
};
@@ -761,6 +852,7 @@
mux {
groups = "tdmb_dout1";
function = "tdmb";
+ bias-disable;
};
};
@@ -768,6 +860,7 @@
mux {
groups = "tdmb_dout2";
function = "tdmb";
+ bias-disable;
};
};
@@ -775,6 +868,7 @@
mux {
groups = "tdmb_dout3";
function = "tdmb";
+ bias-disable;
};
};
@@ -782,6 +876,7 @@
mux {
groups = "tdmb_fs";
function = "tdmb";
+ bias-disable;
};
};
@@ -789,6 +884,7 @@
mux {
groups = "tdmb_fs_slv";
function = "tdmb";
+ bias-disable;
};
};
@@ -796,6 +892,7 @@
mux {
groups = "tdmb_sclk";
function = "tdmb";
+ bias-disable;
};
};
@@ -803,6 +900,7 @@
mux {
groups = "tdmb_sclk_slv";
function = "tdmb";
+ bias-disable;
};
};
@@ -810,6 +908,7 @@
mux {
groups = "tdmc_fs";
function = "tdmc";
+ bias-disable;
};
};
@@ -817,6 +916,7 @@
mux {
groups = "tdmc_fs_slv";
function = "tdmc";
+ bias-disable;
};
};
@@ -824,6 +924,7 @@
mux {
groups = "tdmc_sclk";
function = "tdmc";
+ bias-disable;
};
};
@@ -831,6 +932,7 @@
mux {
groups = "tdmc_sclk_slv";
function = "tdmc";
+ bias-disable;
};
};
@@ -838,6 +940,7 @@
mux {
groups = "tdmc_din0";
function = "tdmc";
+ bias-disable;
};
};
@@ -845,6 +948,7 @@
mux {
groups = "tdmc_din1";
function = "tdmc";
+ bias-disable;
};
};
@@ -852,6 +956,7 @@
mux {
groups = "tdmc_din2";
function = "tdmc";
+ bias-disable;
};
};
@@ -859,6 +964,7 @@
mux {
groups = "tdmc_din3";
function = "tdmc";
+ bias-disable;
};
};
@@ -866,6 +972,7 @@
mux {
groups = "tdmc_dout0";
function = "tdmc";
+ bias-disable;
};
};
@@ -873,6 +980,7 @@
mux {
groups = "tdmc_dout1";
function = "tdmc";
+ bias-disable;
};
};
@@ -880,6 +988,7 @@
mux {
groups = "tdmc_dout2";
function = "tdmc";
+ bias-disable;
};
};
@@ -887,6 +996,7 @@
mux {
groups = "tdmc_dout3";
function = "tdmc";
+ bias-disable;
};
};
@@ -895,6 +1005,7 @@
groups = "uart_tx_a",
"uart_rx_a";
function = "uart_a";
+ bias-disable;
};
};
@@ -903,6 +1014,7 @@
groups = "uart_cts_a",
"uart_rts_a";
function = "uart_a";
+ bias-disable;
};
};
@@ -911,6 +1023,7 @@
groups = "uart_tx_b_x",
"uart_rx_b_x";
function = "uart_b";
+ bias-disable;
};
};
@@ -919,6 +1032,7 @@
groups = "uart_cts_b_x",
"uart_rts_b_x";
function = "uart_b";
+ bias-disable;
};
};
@@ -927,6 +1041,7 @@
groups = "uart_tx_b_z",
"uart_rx_b_z";
function = "uart_b";
+ bias-disable;
};
};
@@ -935,6 +1050,7 @@
groups = "uart_cts_b_z",
"uart_rts_b_z";
function = "uart_b";
+ bias-disable;
};
};
@@ -943,6 +1059,7 @@
groups = "uart_ao_tx_b_z",
"uart_ao_rx_b_z";
function = "uart_ao_b_z";
+ bias-disable;
};
};
@@ -951,6 +1068,7 @@
groups = "uart_ao_cts_b_z",
"uart_ao_rts_b_z";
function = "uart_ao_b_z";
+ bias-disable;
};
};
};
@@ -975,9 +1093,9 @@
};
};
- mailbox: mailbox@ff63dc00 {
+ mailbox: mailbox@ff63c404 {
compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
- reg = <0 0xff63dc00 0 0x400>;
+ reg = <0 0xff63c404 0 0x4c>;
interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
@@ -1239,6 +1357,7 @@
mux {
groups = "i2c_ao_sck_4";
function = "i2c_ao";
+ bias-disable;
};
};
@@ -1246,6 +1365,7 @@
mux {
groups = "i2c_ao_sck_8";
function = "i2c_ao";
+ bias-disable;
};
};
@@ -1253,6 +1373,7 @@
mux {
groups = "i2c_ao_sck_10";
function = "i2c_ao";
+ bias-disable;
};
};
@@ -1260,6 +1381,7 @@
mux {
groups = "i2c_ao_sda_5";
function = "i2c_ao";
+ bias-disable;
};
};
@@ -1267,6 +1389,7 @@
mux {
groups = "i2c_ao_sda_9";
function = "i2c_ao";
+ bias-disable;
};
};
@@ -1274,6 +1397,7 @@
mux {
groups = "i2c_ao_sda_11";
function = "i2c_ao";
+ bias-disable;
};
};
@@ -1281,6 +1405,7 @@
mux {
groups = "remote_input_ao";
function = "remote_input_ao";
+ bias-disable;
};
};
@@ -1289,6 +1414,7 @@
groups = "uart_ao_tx_a",
"uart_ao_rx_a";
function = "uart_ao_a";
+ bias-disable;
};
};
@@ -1297,6 +1423,7 @@
groups = "uart_ao_cts_a",
"uart_ao_rts_a";
function = "uart_ao_a";
+ bias-disable;
};
};
@@ -1305,6 +1432,7 @@
groups = "uart_ao_tx_b",
"uart_ao_rx_b";
function = "uart_ao_b";
+ bias-disable;
};
};
@@ -1313,6 +1441,7 @@
groups = "uart_ao_cts_b",
"uart_ao_rts_b";
function = "uart_ao_b";
+ bias-disable;
};
};
};
@@ -1556,12 +1685,12 @@
#size-cells = <1>;
ranges = <0 0x0 0xfffc0000 0x20000>;
- cpu_scp_lpri: scp-shmem@0 {
+ cpu_scp_lpri: scp-shmem@13000 {
compatible = "amlogic,meson-axg-scp-shmem";
reg = <0x13000 0x400>;
};
- cpu_scp_hpri: scp-shmem@200 {
+ cpu_scp_hpri: scp-shmem@13400 {
compatible = "amlogic,meson-axg-scp-shmem";
reg = <0x13400 0x400>;
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index 765247b..e14e0ce 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -125,6 +125,7 @@
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
+ hdmi-supply = <&hdmi_5v>;
};
&hdmi_tx_tmds_port {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index f1e5cdb..ed336c7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -262,6 +262,11 @@
status = "disabled";
};
+ clock-measure@8758 {
+ compatible = "amlogic,meson-gx-clk-measure";
+ reg = <0x0 0x8758 0x0 0x10>;
+ };
+
i2c_B: i2c@87c0 {
compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087c0 0x0 0x20>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index cbe99bd..8cd50b7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -191,7 +191,7 @@
pinctrl-names = "default";
};
-&pinctrl_aobus {
+&gpio_ao {
gpio-line-names = "UART TX", "UART RX", "Power Control", "Power Key In",
"VCCK En", "CON1 Header Pin31",
"I2S Header Pin6", "IR In", "I2S Header Pin7",
@@ -201,7 +201,7 @@
"";
};
-&pinctrl_periphs {
+&gpio {
gpio-line-names = /* Bank GPIOZ */
"Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
"Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 54954b3..00f7be6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -187,7 +187,7 @@
pinctrl-names = "default";
};
-&pinctrl_aobus {
+&gpio_ao {
gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En",
"USB HUB nRESET", "USB OTG Power En",
"J7 Header Pin2", "IR In", "J7 Header Pin4",
@@ -197,7 +197,7 @@
"";
};
-&pinctrl_periphs {
+&gpio {
gpio-line-names = /* Bank GPIOZ */
"Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
"Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 1ade7e4..6796d25 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -81,6 +81,7 @@
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
+ bias-disable;
};
};
@@ -89,6 +90,7 @@
groups = "uart_cts_ao_a",
"uart_rts_ao_a";
function = "uart_ao";
+ bias-disable;
};
};
@@ -96,6 +98,7 @@
mux {
groups = "uart_tx_ao_b", "uart_rx_ao_b";
function = "uart_ao_b";
+ bias-disable;
};
};
@@ -104,6 +107,7 @@
groups = "uart_cts_ao_b",
"uart_rts_ao_b";
function = "uart_ao_b";
+ bias-disable;
};
};
@@ -111,6 +115,7 @@
mux {
groups = "remote_input_ao";
function = "remote_input_ao";
+ bias-disable;
};
};
@@ -119,6 +124,7 @@
groups = "i2c_sck_ao",
"i2c_sda_ao";
function = "i2c_ao";
+ bias-disable;
};
};
@@ -126,6 +132,7 @@
mux {
groups = "pwm_ao_a_3";
function = "pwm_ao_a_3";
+ bias-disable;
};
};
@@ -133,6 +140,7 @@
mux {
groups = "pwm_ao_a_6";
function = "pwm_ao_a_6";
+ bias-disable;
};
};
@@ -140,6 +148,7 @@
mux {
groups = "pwm_ao_a_12";
function = "pwm_ao_a_12";
+ bias-disable;
};
};
@@ -147,6 +156,7 @@
mux {
groups = "pwm_ao_b";
function = "pwm_ao_b";
+ bias-disable;
};
};
@@ -154,6 +164,7 @@
mux {
groups = "i2s_am_clk";
function = "i2s_out_ao";
+ bias-disable;
};
};
@@ -161,6 +172,7 @@
mux {
groups = "i2s_out_ao_clk";
function = "i2s_out_ao";
+ bias-disable;
};
};
@@ -168,6 +180,7 @@
mux {
groups = "i2s_out_lr_clk";
function = "i2s_out_ao";
+ bias-disable;
};
};
@@ -175,6 +188,7 @@
mux {
groups = "i2s_out_ch01_ao";
function = "i2s_out_ao";
+ bias-disable;
};
};
@@ -182,6 +196,7 @@
mux {
groups = "i2s_out_ch23_ao";
function = "i2s_out_ao";
+ bias-disable;
};
};
@@ -189,6 +204,7 @@
mux {
groups = "i2s_out_ch45_ao";
function = "i2s_out_ao";
+ bias-disable;
};
};
@@ -203,6 +219,7 @@
mux {
groups = "spdif_out_ao_13";
function = "spdif_out_ao";
+ bias-disable;
};
};
@@ -210,6 +227,7 @@
mux {
groups = "ao_cec";
function = "cec_ao";
+ bias-disable;
};
};
@@ -217,6 +235,7 @@
mux {
groups = "ee_cec";
function = "cec_ao";
+ bias-disable;
};
};
};
@@ -282,6 +301,10 @@
compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
};
+&efuse {
+ clocks = <&clkc CLKID_EFUSE>;
+};
+
ðmac {
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
@@ -359,6 +382,7 @@
"emmc_cmd",
"emmc_clk";
function = "emmc";
+ bias-disable;
};
};
@@ -366,6 +390,7 @@
mux {
groups = "emmc_ds";
function = "emmc";
+ bias-disable;
};
};
@@ -373,9 +398,6 @@
mux {
groups = "BOOT_8";
function = "gpio_periphs";
- };
- cfg-pull-down {
- pins = "BOOT_8";
bias-pull-down;
};
};
@@ -387,6 +409,7 @@
"nor_c",
"nor_cs";
function = "nor";
+ bias-disable;
};
};
@@ -396,6 +419,7 @@
"spi_mosi",
"spi_sclk";
function = "spi";
+ bias-disable;
};
};
@@ -403,6 +427,7 @@
mux {
groups = "spi_ss0";
function = "spi";
+ bias-disable;
};
};
@@ -415,6 +440,7 @@
"sdcard_cmd",
"sdcard_clk";
function = "sdcard";
+ bias-disable;
};
};
@@ -422,9 +448,6 @@
mux {
groups = "CARD_2";
function = "gpio_periphs";
- };
- cfg-pull-down {
- pins = "CARD_2";
bias-pull-down;
};
};
@@ -438,6 +461,7 @@
"sdio_cmd",
"sdio_clk";
function = "sdio";
+ bias-disable;
};
};
@@ -445,9 +469,6 @@
mux {
groups = "GPIOX_4";
function = "gpio_periphs";
- };
- cfg-pull-down {
- pins = "GPIOX_4";
bias-pull-down;
};
};
@@ -456,6 +477,7 @@
mux {
groups = "sdio_irq";
function = "sdio";
+ bias-disable;
};
};
@@ -464,6 +486,7 @@
groups = "uart_tx_a",
"uart_rx_a";
function = "uart_a";
+ bias-disable;
};
};
@@ -472,6 +495,7 @@
groups = "uart_cts_a",
"uart_rts_a";
function = "uart_a";
+ bias-disable;
};
};
@@ -480,6 +504,7 @@
groups = "uart_tx_b",
"uart_rx_b";
function = "uart_b";
+ bias-disable;
};
};
@@ -488,6 +513,7 @@
groups = "uart_cts_b",
"uart_rts_b";
function = "uart_b";
+ bias-disable;
};
};
@@ -496,6 +522,7 @@
groups = "uart_tx_c",
"uart_rx_c";
function = "uart_c";
+ bias-disable;
};
};
@@ -504,6 +531,7 @@
groups = "uart_cts_c",
"uart_rts_c";
function = "uart_c";
+ bias-disable;
};
};
@@ -512,6 +540,7 @@
groups = "i2c_sck_a",
"i2c_sda_a";
function = "i2c_a";
+ bias-disable;
};
};
@@ -520,6 +549,7 @@
groups = "i2c_sck_b",
"i2c_sda_b";
function = "i2c_b";
+ bias-disable;
};
};
@@ -528,6 +558,7 @@
groups = "i2c_sck_c",
"i2c_sda_c";
function = "i2c_c";
+ bias-disable;
};
};
@@ -548,6 +579,7 @@
"eth_txd2",
"eth_txd3";
function = "eth";
+ bias-disable;
};
};
@@ -563,6 +595,7 @@
"eth_txd0",
"eth_txd1";
function = "eth";
+ bias-disable;
};
};
@@ -570,6 +603,7 @@
mux {
groups = "pwm_a_x";
function = "pwm_a_x";
+ bias-disable;
};
};
@@ -577,6 +611,7 @@
mux {
groups = "pwm_a_y";
function = "pwm_a_y";
+ bias-disable;
};
};
@@ -584,6 +619,7 @@
mux {
groups = "pwm_b";
function = "pwm_b";
+ bias-disable;
};
};
@@ -591,6 +627,7 @@
mux {
groups = "pwm_d";
function = "pwm_d";
+ bias-disable;
};
};
@@ -598,6 +635,7 @@
mux {
groups = "pwm_e";
function = "pwm_e";
+ bias-disable;
};
};
@@ -605,6 +643,7 @@
mux {
groups = "pwm_f_x";
function = "pwm_f_x";
+ bias-disable;
};
};
@@ -612,6 +651,7 @@
mux {
groups = "pwm_f_y";
function = "pwm_f_y";
+ bias-disable;
};
};
@@ -619,6 +659,7 @@
mux {
groups = "hdmi_hpd";
function = "hdmi_hpd";
+ bias-disable;
};
};
@@ -626,6 +667,7 @@
mux {
groups = "hdmi_sda", "hdmi_scl";
function = "hdmi_i2c";
+ bias-disable;
};
};
@@ -633,6 +675,7 @@
mux {
groups = "i2sout_ch23_y";
function = "i2s_out";
+ bias-disable;
};
};
@@ -640,6 +683,7 @@
mux {
groups = "i2sout_ch45_y";
function = "i2s_out";
+ bias-disable;
};
};
@@ -647,6 +691,7 @@
mux {
groups = "i2sout_ch67_y";
function = "i2s_out";
+ bias-disable;
};
};
@@ -654,6 +699,7 @@
mux {
groups = "spdif_out_y";
function = "spdif_out";
+ bias-disable;
};
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
new file mode 100644
index 0000000..82b1c485
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 BayLibre, SAS.
+ * Author: Neil Armstrong <[email protected]>
+ * Author: Jerome Brunet <[email protected]>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+ compatible = "libretech,aml-s805x-ac", "amlogic,s805x",
+ "amlogic,meson-gxl";
+ model = "Libre Computer Board AML-S805X-AC";
+
+ aliases {
+ serial0 = &uart_AO;
+ ethernet0 = ðmac;
+ spi0 = &spifc;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ cvbs-connector {
+ /*
+ * The pads are present but no connector is soldered on
+ * 2J2, so keep this off by default.
+ */
+ status = "disabled";
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
+
+ dc_5v: regulator-dc_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "DC_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x20000000>;
+ };
+
+ vcck: regulator-vcck {
+ compatible = "regulator-fixed";
+ regulator-name = "VCCK";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_5v>;
+
+ /*
+ * This is controlled by GPIOAO_9 we reserve this but
+ * claiming it as done below reset the board anyway
+ * Need to investigate this
+ *
+ * gpio = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+ * enable-active-high;
+ */
+ regulator-always-on;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_5v>;
+ regulator-always-on;
+ };
+
+ vddio_boot: regulator-vddio_boot {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-always-on;
+ };
+};
+
+&cec_AO {
+ status = "okay";
+ pinctrl-0 = <&ao_cec_pins>;
+ pinctrl-names = "default";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+ðmac {
+ status = "okay";
+};
+
+&internal_phy {
+ pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>;
+ pinctrl-names = "default";
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+&gpio_ao {
+ gpio-line-names = "UART TX",
+ "UART RX",
+ "7J1 Header Pin31",
+ "", "", "", "",
+ "IR In",
+ "HDMI CEC",
+ "5V VCCK Regulator",
+ /* GPIO_TEST_N */
+ "";
+};
+
+&gpio {
+ gpio-line-names = /* Bank GPIOZ */
+ "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "",
+ "Eth Link LED", "Eth Activity LED",
+ /* Bank GPIOH */
+ "HDMI HPD", "HDMI SDA", "HDMI SCL",
+ "", "7J1 Header Pin13",
+ "7J1 Header Pin15",
+ "7J1 Header Pin7",
+ "7J1 Header Pin12",
+ "7J1 Header Pin16",
+ "7J1 Header Pin18",
+ /* Bank BOOT */
+ "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
+ "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
+ "eMMC Clk", "eMMC Reset", "eMMC CMD",
+ "SPI NOR MOSI", "SPI NOR MISO", "SPI NOR Clk",
+ "", "SPI NOR Chip Select",
+ /* Bank CARD */
+ "", "", "", "", "", "", "",
+ /* Bank GPIODV */
+ "", "", "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "", "", "",
+ "7J1 Header Pin27", "7J1 Header Pin28", "",
+ "7J1 Header Pin29",
+ "VCCK Regulator", "VDDEE Regulator",
+ /* Bank GPIOX */
+ "7J1 Header Pin22", "7J1 Header Pin26",
+ "7J1 Header Pin36", "7J1 Header Pin38",
+ "7J1 Header Pin40", "7J1 Header Pin37",
+ "7J1 Header Pin33", "7J1 Header Pin35",
+ "7J1 Header Pin19", "7J1 Header Pin21",
+ "7J1 Header Pin24", "7J1 Header Pin23",
+ "7J1 Header Pin8", "7J1 Header Pin10",
+ "", "", "7J1 Header Pin32", "", "",
+ /* Bank GPIOCLK */
+ "", "";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ max-frequency = <200000000>;
+ disable-wp;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+&spifc {
+ status = "okay";
+ pinctrl-0 = <&nor_pins>;
+ pinctrl-names = "default";
+
+ w25q32: spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <3000000>;
+ };
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
index 15014fa..0c8e830 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
@@ -86,6 +86,7 @@
max-speed = <1000>;
interrupt-parent = <&gpio_intc>;
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+ eee-broken-1000t;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
new file mode 100644
index 0000000..9a8a8a7
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 He Yangxuan
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d-p230.dts"
+
+/ {
+ compatible = "phicomm,n1", "amlogic,s905d", "amlogic,meson-gxl";
+ model = "Phicomm N1";
+
+ cvbs-connector {
+ status = "disabled";
+ };
+};
+
+&cvbs_vdac_port {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
index d32cf38..5499e8d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -78,6 +78,7 @@
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
+ hdmi-supply = <&hdmi_5v>;
};
&hdmi_tx_tmds_port {
@@ -112,7 +113,7 @@
linux,rc-map-name = "rc-geekbox";
};
-&pinctrl_aobus {
+&gpio_ao {
gpio-line-names = "UART TX",
"UART RX",
"Power Key In",
@@ -127,7 +128,7 @@
"";
};
-&pinctrl_periphs {
+&gpio {
gpio-line-names = /* Bank GPIOZ */
"", "", "", "", "", "", "",
"", "", "", "", "", "", "",
@@ -187,6 +188,13 @@
};
};
+&uart_A {
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ };
+};
+
/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
&uart_AO {
status = "okay";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index 90a56af..db29344 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -155,6 +155,7 @@
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
+ hdmi-supply = <&hdmi_5v>;
};
&hdmi_tx_tmds_port {
@@ -163,7 +164,7 @@
};
};
-&pinctrl_aobus {
+&gpio_ao {
gpio-line-names = "UART TX",
"UART RX",
"Blue LED",
@@ -178,7 +179,7 @@
"7J1 Header Pin15";
};
-&pinctrl_periphs {
+&gpio {
gpio-line-names = /* Bank GPIOZ */
"", "", "", "", "", "", "",
"", "", "", "", "", "", "",
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
index 5896e8a..2602940 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
@@ -51,6 +51,7 @@
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
+ hdmi-supply = <&hdmi_5v>;
};
&hdmi_tx_tmds_port {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 8f0bb3c..ed27809 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -75,6 +75,10 @@
};
};
+&efuse {
+ clocks = <&clkc CLKID_EFUSE>;
+};
+
ðmac {
reg = <0x0 0xc9410000 0x0 0x10000
0x0 0xc8834540 0x0 0x4>;
@@ -112,6 +116,7 @@
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
+ bias-disable;
};
};
@@ -120,6 +125,7 @@
groups = "uart_cts_ao_a",
"uart_rts_ao_a";
function = "uart_ao";
+ bias-disable;
};
};
@@ -127,6 +133,7 @@
mux {
groups = "uart_tx_ao_b", "uart_rx_ao_b";
function = "uart_ao_b";
+ bias-disable;
};
};
@@ -134,6 +141,7 @@
mux {
groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1";
function = "uart_ao_b";
+ bias-disable;
};
};
@@ -142,6 +150,7 @@
groups = "uart_cts_ao_b",
"uart_rts_ao_b";
function = "uart_ao_b";
+ bias-disable;
};
};
@@ -149,6 +158,7 @@
mux {
groups = "remote_input_ao";
function = "remote_input_ao";
+ bias-disable;
};
};
@@ -157,6 +167,7 @@
groups = "i2c_sck_ao",
"i2c_sda_ao";
function = "i2c_ao";
+ bias-disable;
};
};
@@ -164,6 +175,7 @@
mux {
groups = "pwm_ao_a_3";
function = "pwm_ao_a";
+ bias-disable;
};
};
@@ -171,6 +183,7 @@
mux {
groups = "pwm_ao_a_8";
function = "pwm_ao_a";
+ bias-disable;
};
};
@@ -178,6 +191,7 @@
mux {
groups = "pwm_ao_b";
function = "pwm_ao_b";
+ bias-disable;
};
};
@@ -185,6 +199,7 @@
mux {
groups = "pwm_ao_b_6";
function = "pwm_ao_b";
+ bias-disable;
};
};
@@ -192,6 +207,7 @@
mux {
groups = "i2s_out_ch23_ao";
function = "i2s_out_ao";
+ bias-disable;
};
};
@@ -199,6 +215,7 @@
mux {
groups = "i2s_out_ch45_ao";
function = "i2s_out_ao";
+ bias-disable;
};
};
@@ -206,6 +223,7 @@
mux {
groups = "spdif_out_ao_6";
function = "spdif_out_ao";
+ bias-disable;
};
};
@@ -213,6 +231,7 @@
mux {
groups = "spdif_out_ao_9";
function = "spdif_out_ao";
+ bias-disable;
};
};
@@ -220,6 +239,7 @@
mux {
groups = "ao_cec";
function = "cec_ao";
+ bias-disable;
};
};
@@ -227,6 +247,7 @@
mux {
groups = "ee_cec";
function = "cec_ao";
+ bias-disable;
};
};
};
@@ -306,6 +327,7 @@
"emmc_cmd",
"emmc_clk";
function = "emmc";
+ bias-disable;
};
};
@@ -313,6 +335,7 @@
mux {
groups = "emmc_ds";
function = "emmc";
+ bias-disable;
};
};
@@ -320,9 +343,6 @@
mux {
groups = "BOOT_8";
function = "gpio_periphs";
- };
- cfg-pull-down {
- pins = "BOOT_8";
bias-pull-down;
};
};
@@ -334,6 +354,7 @@
"nor_c",
"nor_cs";
function = "nor";
+ bias-disable;
};
};
@@ -343,6 +364,7 @@
"spi_mosi",
"spi_sclk";
function = "spi";
+ bias-disable;
};
};
@@ -350,6 +372,7 @@
mux {
groups = "spi_ss0";
function = "spi";
+ bias-disable;
};
};
@@ -362,6 +385,7 @@
"sdcard_cmd",
"sdcard_clk";
function = "sdcard";
+ bias-disable;
};
};
@@ -369,9 +393,6 @@
mux {
groups = "CARD_2";
function = "gpio_periphs";
- };
- cfg-pull-down {
- pins = "CARD_2";
bias-pull-down;
};
};
@@ -385,6 +406,7 @@
"sdio_cmd",
"sdio_clk";
function = "sdio";
+ bias-disable;
};
};
@@ -392,9 +414,6 @@
mux {
groups = "GPIOX_4";
function = "gpio_periphs";
- };
- cfg-pull-down {
- pins = "GPIOX_4";
bias-pull-down;
};
};
@@ -403,6 +422,7 @@
mux {
groups = "sdio_irq";
function = "sdio";
+ bias-disable;
};
};
@@ -411,6 +431,7 @@
groups = "uart_tx_a",
"uart_rx_a";
function = "uart_a";
+ bias-disable;
};
};
@@ -419,6 +440,7 @@
groups = "uart_cts_a",
"uart_rts_a";
function = "uart_a";
+ bias-disable;
};
};
@@ -427,6 +449,7 @@
groups = "uart_tx_b",
"uart_rx_b";
function = "uart_b";
+ bias-disable;
};
};
@@ -435,6 +458,7 @@
groups = "uart_cts_b",
"uart_rts_b";
function = "uart_b";
+ bias-disable;
};
};
@@ -443,6 +467,7 @@
groups = "uart_tx_c",
"uart_rx_c";
function = "uart_c";
+ bias-disable;
};
};
@@ -451,6 +476,7 @@
groups = "uart_cts_c",
"uart_rts_c";
function = "uart_c";
+ bias-disable;
};
};
@@ -459,6 +485,7 @@
groups = "i2c_sck_a",
"i2c_sda_a";
function = "i2c_a";
+ bias-disable;
};
};
@@ -467,6 +494,7 @@
groups = "i2c_sck_b",
"i2c_sda_b";
function = "i2c_b";
+ bias-disable;
};
};
@@ -475,6 +503,7 @@
groups = "i2c_sck_c",
"i2c_sda_c";
function = "i2c_c";
+ bias-disable;
};
};
@@ -495,6 +524,7 @@
"eth_txd2",
"eth_txd3";
function = "eth";
+ bias-disable;
};
};
@@ -502,6 +532,7 @@
mux {
groups = "eth_link_led";
function = "eth_led";
+ bias-disable;
};
};
@@ -516,6 +547,7 @@
mux {
groups = "pwm_a";
function = "pwm_a";
+ bias-disable;
};
};
@@ -523,6 +555,7 @@
mux {
groups = "pwm_b";
function = "pwm_b";
+ bias-disable;
};
};
@@ -530,6 +563,7 @@
mux {
groups = "pwm_c";
function = "pwm_c";
+ bias-disable;
};
};
@@ -537,6 +571,7 @@
mux {
groups = "pwm_d";
function = "pwm_d";
+ bias-disable;
};
};
@@ -544,6 +579,7 @@
mux {
groups = "pwm_e";
function = "pwm_e";
+ bias-disable;
};
};
@@ -551,6 +587,7 @@
mux {
groups = "pwm_f_clk";
function = "pwm_f";
+ bias-disable;
};
};
@@ -558,6 +595,7 @@
mux {
groups = "pwm_f_x";
function = "pwm_f";
+ bias-disable;
};
};
@@ -565,6 +603,7 @@
mux {
groups = "hdmi_hpd";
function = "hdmi_hpd";
+ bias-disable;
};
};
@@ -572,6 +611,7 @@
mux {
groups = "hdmi_sda", "hdmi_scl";
function = "hdmi_i2c";
+ bias-disable;
};
};
@@ -579,6 +619,7 @@
mux {
groups = "i2s_am_clk";
function = "i2s_out";
+ bias-disable;
};
};
@@ -586,6 +627,7 @@
mux {
groups = "i2s_out_ao_clk";
function = "i2s_out";
+ bias-disable;
};
};
@@ -593,6 +635,7 @@
mux {
groups = "i2s_out_lr_clk";
function = "i2s_out";
+ bias-disable;
};
};
@@ -600,12 +643,14 @@
mux {
groups = "i2s_out_ch01";
function = "i2s_out";
+ bias-disable;
};
};
i2sout_ch23_z_pins: i2sout_ch23_z {
mux {
groups = "i2sout_ch23_z";
function = "i2s_out";
+ bias-disable;
};
};
@@ -613,6 +658,7 @@
mux {
groups = "i2sout_ch45_z";
function = "i2s_out";
+ bias-disable;
};
};
@@ -620,6 +666,7 @@
mux {
groups = "i2sout_ch67_z";
function = "i2s_out";
+ bias-disable;
};
};
@@ -627,6 +674,7 @@
mux {
groups = "spdif_out_h";
function = "spdif_out";
+ bias-disable;
};
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index 313f88f..3c3a667 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -132,19 +132,15 @@
map1 {
trip = <&cpu_alert1>;
- cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>;
- };
-
- map2 {
- trip = <&cpu_alert1>;
- cooling-device =
- <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
-
- map3 {
- trip = <&cpu_alert1>;
- cooling-device =
- <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
@@ -271,6 +267,7 @@
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
+ hdmi-supply = <&hdmi_5v>;
};
&hdmi_tx_tmds_port {
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
index 602f63f..fe4fda4 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
@@ -78,6 +78,20 @@
<0x00000008 0x80000000 0 0x80000000>;
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* Chipselect 2,00000000 is physically at 0x18000000 */
+ vram: vram@18000000 {
+ /* 8 MB of designated video RAM */
+ compatible = "shared-dma-pool";
+ reg = <0x00000000 0x18000000 0 0x00800000>;
+ no-map;
+ };
+ };
+
gic: interrupt-controller@2c001000 {
compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
#interrupt-cells = <3>;
@@ -107,6 +121,15 @@
<0 63 4>;
};
+ panel {
+ compatible = "arm,rtsm-display";
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&clcd_pads>;
+ };
+ };
+ };
+
smb@8000000 {
compatible = "simple-bus";
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
index d2dbc3f..b25f3cb 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
@@ -24,11 +24,6 @@
bank-width = <4>;
};
- v2m_video_ram: vram@2,00000000 {
- compatible = "arm,vexpress-vram";
- reg = <2 0x00000000 0x00800000>;
- };
-
ethernet@2,02000000 {
compatible = "smsc,lan91c111";
reg = <2 0x02000000 0x10000>;
@@ -187,38 +182,16 @@
interrupts = <14>;
clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
clock-names = "clcdclk", "apb_pclk";
- arm,pl11x,framebuffer = <0x18000000 0x00180000>;
- memory-region = <&v2m_video_ram>;
- max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */
+ /* 800x600 16bpp @36MHz works fine */
+ max-memory-bandwidth = <54000000>;
+ memory-region = <&vram>;
port {
- v2m_clcd_pads: endpoint {
- remote-endpoint = <&v2m_clcd_panel>;
+ clcd_pads: endpoint {
+ remote-endpoint = <&panel_in>;
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
};
};
-
- panel {
- compatible = "panel-dpi";
-
- port {
- v2m_clcd_panel: endpoint {
- remote-endpoint = <&v2m_clcd_pads>;
- };
- };
-
- panel-timing {
- clock-frequency = <63500127>;
- hactive = <1024>;
- hback-porch = <152>;
- hfront-porch = <48>;
- hsync-len = <104>;
- vactive = <768>;
- vback-porch = <23>;
- vfront-porch = <3>;
- vsync-len = <4>;
- };
- };
};
virtio-block@130000 {
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
index 3888038..8981c3d 100644
--- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
+++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -65,6 +65,20 @@
reg = <0 0x80000000 0 0x80000000>; /* 2GB @ 2GB */
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* Chipselect 2 is physically at 0x18000000 */
+ vram: vram@18000000 {
+ /* 8 MB of designated video RAM */
+ compatible = "shared-dma-pool";
+ reg = <0 0x18000000 0 0x00800000>;
+ no-map;
+ };
+ };
+
gic: interrupt-controller@2c001000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
index fe3a0b1..81b7239 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
@@ -55,37 +55,44 @@
map0 {
/* Set maximum frequency as 1800MHz */
trip = <&atlas0_alert_0>;
- cooling-device = <&cpu4 1 2>;
+ cooling-device = <&cpu4 1 2>, <&cpu5 1 2>,
+ <&cpu6 1 2>, <&cpu7 1 2>;
};
map1 {
/* Set maximum frequency as 1700MHz */
trip = <&atlas0_alert_1>;
- cooling-device = <&cpu4 2 3>;
+ cooling-device = <&cpu4 2 3>, <&cpu5 2 3>,
+ <&cpu6 2 3>, <&cpu7 2 3>;
};
map2 {
/* Set maximum frequency as 1600MHz */
trip = <&atlas0_alert_2>;
- cooling-device = <&cpu4 3 4>;
+ cooling-device = <&cpu4 3 4>, <&cpu5 3 4>,
+ <&cpu6 3 4>, <&cpu7 3 4>;
};
map3 {
/* Set maximum frequency as 1500MHz */
trip = <&atlas0_alert_3>;
- cooling-device = <&cpu4 4 5>;
+ cooling-device = <&cpu4 4 5>, <&cpu5 4 5>,
+ <&cpu6 4 5>, <&cpu7 4 5>;
};
map4 {
/* Set maximum frequency as 1400MHz */
trip = <&atlas0_alert_4>;
- cooling-device = <&cpu4 5 7>;
+ cooling-device = <&cpu4 5 7>, <&cpu5 5 7>,
+ <&cpu6 5 7>, <&cpu7 5 7>;
};
map5 {
/* Set maximum frequencyas 1200MHz */
trip = <&atlas0_alert_5>;
- cooling-device = <&cpu4 7 9>;
+ cooling-device = <&cpu4 7 9>, <&cpu5 7 9>,
+ <&cpu6 7 9>, <&cpu7 7 9>;
};
map6 {
/* Set maximum frequency as 1000MHz */
trip = <&atlas0_alert_6>;
- cooling-device = <&cpu4 9 14>;
+ cooling-device = <&cpu4 9 14>, <&cpu5 9 14>,
+ <&cpu6 9 14>, <&cpu7 9 14>;
};
};
};
@@ -222,27 +229,32 @@
map0 {
/* Set maximum frequency as 1200MHz */
trip = <&apollo_alert_2>;
- cooling-device = <&cpu0 1 2>;
+ cooling-device = <&cpu0 1 2>, <&cpu1 1 2>,
+ <&cpu2 1 2>, <&cpu3 1 2>;
};
map1 {
/* Set maximum frequency as 1100MHz */
trip = <&apollo_alert_3>;
- cooling-device = <&cpu0 2 3>;
+ cooling-device = <&cpu0 2 3>, <&cpu1 2 3>,
+ <&cpu2 2 3>, <&cpu3 2 3>;
};
map2 {
/* Set maximum frequency as 1000MHz */
trip = <&apollo_alert_4>;
- cooling-device = <&cpu0 3 4>;
+ cooling-device = <&cpu0 3 4>, <&cpu1 3 4>,
+ <&cpu2 3 4>, <&cpu3 3 4>;
};
map3 {
/* Set maximum frequency as 900MHz */
trip = <&apollo_alert_5>;
- cooling-device = <&cpu0 4 5>;
+ cooling-device = <&cpu0 4 5>, <&cpu1 4 5>,
+ <&cpu2 4 5>, <&cpu3 4 5>;
};
map4 {
/* Set maximum frequency as 800MHz */
trip = <&apollo_alert_6>;
- cooling-device = <&cpu0 5 9>;
+ cooling-device = <&cpu0 5 9>, <&cpu1 5 9>,
+ <&cpu2 5 9>, <&cpu3 5 9>;
};
};
};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 2131f12..84446f9 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -1559,10 +1559,12 @@
};
usbdrd30: usbdrd {
- compatible = "samsung,exynos5250-dwusb3";
+ compatible = "samsung,exynos5433-dwusb3";
clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
- <&cmu_fsys CLK_SCLK_USBDRD30>;
- clock-names = "usbdrd30", "usbdrd30_susp_clk";
+ <&cmu_fsys CLK_SCLK_USBDRD30>,
+ <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>,
+ <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>;
+ clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk";
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -1570,6 +1572,10 @@
usbdrd_dwc3: dwc3@15400000 {
compatible = "snps,dwc3";
+ clocks = <&cmu_fsys CLK_SCLK_USBDRD30>,
+ <&cmu_fsys CLK_ACLK_USBDRD30>,
+ <&cmu_fsys CLK_SCLK_USBDRD30>;
+ clock-names = "ref", "bus_early", "suspend";
reg = <0x15400000 0x10000>;
interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>;
@@ -1606,10 +1612,12 @@
};
usbhost30: usbhost {
- compatible = "samsung,exynos5250-dwusb3";
+ compatible = "samsung,exynos5433-dwusb3";
clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
- <&cmu_fsys CLK_SCLK_USBHOST30>;
- clock-names = "usbdrd30", "usbdrd30_susp_clk";
+ <&cmu_fsys CLK_SCLK_USBHOST30>,
+ <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>,
+ <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>;
+ clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk";
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -1617,6 +1625,10 @@
usbhost_dwc3: dwc3@15a00000 {
compatible = "snps,dwc3";
+ clocks = <&cmu_fsys CLK_SCLK_USBHOST30>,
+ <&cmu_fsys CLK_ACLK_USBHOST30>,
+ <&cmu_fsys CLK_SCLK_USBHOST30>;
+ clock-names = "ref", "bus_early", "suspend";
reg = <0x15a00000 0x10000>;
interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>;
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index c98bcbc..4643546 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -85,36 +85,36 @@
compatible = "gpio-leds";
user_led1 {
- label = "user_led1";
+ label = "green:user1";
/* gpio_150_user_led1 */
gpios = <&gpio18 6 0>;
linux,default-trigger = "heartbeat";
};
user_led2 {
- label = "user_led2";
+ label = "green:user2";
/* gpio_151_user_led2 */
gpios = <&gpio18 7 0>;
- linux,default-trigger = "mmc0";
+ linux,default-trigger = "none";
};
user_led3 {
- label = "user_led3";
+ label = "green:user3";
/* gpio_189_user_led3 */
gpios = <&gpio23 5 0>;
- default-state = "off";
+ linux,default-trigger = "mmc0";
};
user_led4 {
- label = "user_led4";
+ label = "green:user4";
/* gpio_190_user_led4 */
gpios = <&gpio23 6 0>;
panic-indicator;
- linux,default-trigger = "cpu0";
+ linux,default-trigger = "none";
};
wlan_active_led {
- label = "wifi_active";
+ label = "yellow:wlan";
/* gpio_205_wifi_active */
gpios = <&gpio25 5 0>;
linux,default-trigger = "phy0tx";
@@ -122,7 +122,7 @@
};
bt_active_led {
- label = "bt_active";
+ label = "blue:bt";
gpios = <&gpio25 7 0>;
/* gpio_207_user_led1 */
linux,default-trigger = "hci0-power";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index f432b0a..20ae40d 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -79,6 +79,7 @@
capacity-dmips-mhz = <592>;
clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
};
cpu2: cpu@2 {
@@ -91,6 +92,7 @@
capacity-dmips-mhz = <592>;
clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
};
cpu3: cpu@3 {
@@ -103,6 +105,7 @@
capacity-dmips-mhz = <592>;
clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
};
cpu4: cpu@100 {
@@ -129,6 +132,7 @@
capacity-dmips-mhz = <1024>;
clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
};
cpu6: cpu@102 {
@@ -141,6 +145,7 @@
capacity-dmips-mhz = <1024>;
clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
};
cpu7: cpu@103 {
@@ -153,6 +158,7 @@
capacity-dmips-mhz = <1024>;
clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
};
idle-states {
@@ -1112,12 +1118,18 @@
map0 {
trip = <&target>;
contribution = <1024>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&target>;
contribution = <512>;
- cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
index 4f51186..c9775b6 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -10,12 +10,19 @@
/dts-v1/;
#include "hi3670.dtsi"
+#include "hikey970-pinctrl.dtsi"
/ {
model = "HiKey970";
compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670";
aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
serial6 = &uart6; /* console UART */
};
@@ -30,6 +37,337 @@
};
};
+/*
+ * Legend: proper name = the GPIO line is used as GPIO
+ * NC = not connected (pin out but not routed from the chip to
+ * anything the board)
+ * "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ * "" = no idea, schematic doesn't say, could be
+ * unrouted (not connected to any external pin)
+ * LSEC = Low Speed External Connector
+ * HSEC = High Speed External Connector
+ *
+ * Line names are taken from "hikey970-schematics.pdf" from HiSilicon.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART2. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+&gpio0 {
+ /* GPIO_000-GPIO_007 */
+ gpio-line-names =
+ "",
+ "TP901", /* TEST_MODE connected to TP901 */
+ "",
+ "GPIO_003_USB_HUB_RESET_N",
+ "NC",
+ "[AP_GPS_REF_CLK]",
+ "[I2C3_SCL]",
+ "[I2C3_SDA]";
+};
+
+&gpio1 {
+ /* GPIO_008-GPIO_015 */
+ gpio-line-names =
+ "[UART0_CTS]", /* LSEC pin 3: GPIO_008_UART2_CTS_N */
+ "[UART0_RTS]", /* LSEC pin 9: GPIO_009_UART2_RTS_N */
+ "[UART0_TXD]", /* LSEC pin 5: GPIO_010_UART2_TXD */
+ "[UART0_RXD]", /* LSEC pin 7: GPIO_011_UART2_RXD */
+ "[USER_LED5]",
+ "GPIO-I", /* LSEC pin 31: GPIO_013_CAM0_RST_N */
+ "[USER_LED3]",
+ "[USER_LED4]";
+};
+
+&gpio2 {
+ /* GPIO_016-GPIO_023 */
+ gpio-line-names =
+ "GPIO-G", /* LSEC pin 29: GPIO_016_LCD_TE0 */
+ "[CSI0_MCLK]", /* HSEC pin 15: ISP_CCLK0_MCAM */
+ "[CSI1_MCLK]", /* HSEC pin 17: ISP_CCLK1_SCAM */
+ "GPIO_019_BT_ACTIVE",
+ "[I2C2_SCL]", /* HSEC pin 32: ISP_SCL0 */
+ "[I2C2_SDA]", /* HSEC pin 34: ISP_SDA0 */
+ "[I2C3_SCL]", /* HSEC pin 36: ISP_SCL1 */
+ "[I2C3_SDA]"; /* HSEC pin 38: ISP_SDA1 */
+};
+
+&gpio3 {
+ /* GPIO_024-GPIO_031 */
+ gpio-line-names =
+ "GPIO_024_WIFI_ACTIVE",
+ "GPIO_025_PERST_M.2",
+ "[I2C4_SCL]",
+ "[I2C4_SDA]",
+ "NC",
+ "GPIO-H", /* LSEC pin 30: GPIO_029_LCD_RST_N */
+ "[USER_LED1]",
+ "GPIO-L"; /* LSEC pin 34: GPIO_031 */
+};
+
+&gpio4 {
+ /* GPIO_032-GPIO_039 */
+ gpio-line-names =
+ "GPIO-K", /* LSEC pin 33: GPIO_032_CAM1_RST_N */
+ "GPIO_033_PMU1_EN",
+ "GPIO_034_USBSW_SEL",
+ /*
+ * These two pins should be used for SD(IO) data according
+ * to the 96boards specification but seems to be repurposed
+ * for UART 0. They are however named according to the spec.
+ */
+ "[SD_DAT1]", /* HSEC pin 3: GPIO_035_UART0_RXD */
+ "[SD_DAT2]", /* HSEC pin 5: GPIO_036_UART0_TXD */
+ "[UART1_RXD]", /* LSEC pin 13: DEBUG_UART6_RXD */
+ "[UART1_TXD]", /* LSEC pin 11: DEBUG_UART6_TXD */
+ "[SOC_GPS_UART3_CTS_N]"; /* TP2304 */
+};
+
+&gpio5 {
+ /* GPIO_040-GPIO_047 */
+ gpio-line-names =
+ "[SOC_GPS_UART3_RTS_N]", /* TP2302 */
+ "[SOC_GPS_UART3_RXD]", /* TP2303 */
+ "[SOC_GPS_UART3_TXD]", /* TP2305 */
+ "[SOC_BT_UART4_CTS_N]",
+ "[SOC_BT_UART4_RTS_N]",
+ "[SOC_BT_UART4_RXD]",
+ "[SOC_BT_UART4_TXD]",
+ "NC";
+};
+
+&gpio6 {
+ /* GPIO_048-GPIO_055 */
+ gpio-line-names =
+ "NC",
+ "GPIO_049_USER_LED6",
+ "GPIO_050_CAN_RST",
+ "GPIO_051_WIFI_EN",
+ "GPIO-D", /* LSEC pin 26 */
+ "GPIO-J", /* LSEC pin 32 */
+ "GPIO_054_BT_EN",
+ "[GPIO_055_SEL]";
+};
+
+&gpio7 {
+ /* GPIO_056-GPIO_063 */
+ gpio-line-names =
+ "[PCIE_PERST_L]", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio8 {
+ /* GPIO_064-GPIO_071 */
+ gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio9 {
+ /* GPIO_072-GPIO_079 */
+ gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio10 {
+ /* GPIO_080-GPIO_087 */
+ gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio11 {
+ /* GPIO_088-GPIO_095 */
+ gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio12 {
+ /* GPIO_096-GPIO_103 */
+ gpio-line-names = "NC", "", "", "", "", "", "", "";
+};
+
+&gpio13 {
+ /* GPIO_104-GPIO_111 */
+ gpio-line-names = "", "", "", "", "", "", "", "";
+};
+
+&gpio14 {
+ /* GPIO_112-GPIO_119 */
+ gpio-line-names = "", "", "", "", "", "", "", "";
+};
+
+&gpio15 {
+ /* GPIO_120-GPIO_127 */
+ gpio-line-names = "", "", "", "", "", "", "", "";
+};
+
+&gpio16 {
+ /* GPIO_128-GPIO_135 */
+ gpio-line-names =
+ "[WL_SDIO_CLK]",
+ "[WL_SDIO_CMD]",
+ "[WL_SDIO_DATA0]",
+ "[WL_SDIO_DATA1]",
+ "[WL_SDIO_DATA2]",
+ "[WL_SDIO_DATA3]",
+ "[ETH_ISOLATE]",
+ "NC";
+};
+
+&gpio17 {
+ /* GPIO_136-GPIO_143 */
+ gpio-line-names =
+ "[MINI1CLK_EN]", "NC", "", "", "", "", "", "";
+};
+
+&gpio18 {
+ /* GPIO_144-GPIO_151 */
+ gpio-line-names =
+ "[SPI1_SCLK]", /* HSEC pin 9: GPIO_144_SPI3_CLK */
+ "[SPI1_DIN]", /* HSEC pin 11: GPIO_145_SPI3_DI */
+ "[SPI1_DOUT]", /* HSEC pin 1: GPIO_146_SPI3_DO */
+ "[SPI1_CS]", /* HSEC pin 7: GPIO_147_SPI3_CS0_N */
+ "[POWER_INT_N]",
+ "[CDMA_GPS_SYNC]",
+ "GPIO_150_PEX_INTA",
+ "GPIO_151_CAN_INT";
+};
+
+&gpio19 {
+ /* GPIO_152-GPIO_159 */
+ gpio-line-names = "", "", "", "", "", "", "", "";
+};
+
+&gpio20 {
+ /* GPIO_160-GPIO_167 */
+ gpio-line-names =
+ "[SD_CLK]",
+ "[SD_CMD]",
+ "[SD_DATA0]",
+ "[SD_DATA1]",
+ "[SD_DATA2]",
+ "[SD_DATA3]",
+ "GPIO_166_ETHCLK_EN",
+ "GPIO_167_USER_LED2";
+};
+
+&gpio21 {
+ /* GPIO_168-GPIO_175 */
+ gpio-line-names =
+ "GPIO_168_GPS_EN",
+ "GPIO-C", /* LSEC pin 25: GPIO_169_USIM1_CLK */
+ "GPIO-E", /* LSEC pin 27: GPIO_170_USIM1_RST */
+ "GPIO-B", /* LSEC pin 24: GPIO_171_USIM1_DATA */
+ "", "", "", "", "";
+};
+
+&gpio22 {
+ /* GPIO_176-GPIO_183 */
+ gpio-line-names =
+ "[PMU_PWR_HOLD]",
+ "GPIO_177_WL_WAKEUP_AP",
+ "[JTAG_TCK]",
+ "[JTAG_TMS]",
+ "[JTAG_TDI]",
+ "[JTAG_TMS]",
+ "GPIO_182_FATAL_ERR",
+ "NC";
+};
+
+&gpio23 {
+ /* GPIO_184-GPIO_191 */
+ gpio-line-names =
+ "GPIO_184_JTAG_SEL",
+ "GPIO-F", /* LSEC pin 28: GPIO_185_LCD_BL_PWM */
+ "[I2C0_SCL]", /* LSEC pin 15: GPIO_186_I2C0_SCL */
+ "[I2C0_SDA]", /* LSEC pin 17: GPIO_187_I2C0_SDA */
+ "[GPIO_188_I2C1_SCL]", /* Actual SoC I2C1_SCL */
+ "[GPIO_189_I2C1_SDA]", /* Actual SoC I2C1_SDA */
+ "[I2C1_SCL]", /* LSEC pin 19: GPIO_190_I2C2_SCL */
+ "[I2C2_SDA]"; /* LSEC pin 21: GPIO_191_I2C2_SDA */
+};
+
+&gpio24 {
+ /* GPIO_192-GPIO_199 */
+ gpio-line-names =
+ "[SD_LED]",
+ "NC",
+ "[PCM_DI]", /* LSEC pin 22: GPIO_194_I2S0_DI */
+ "[PCM_DO]", /* LSEC pin 20: GPIO_195_I2S0_DO */
+ "[PCM_CLK]", /* LSEC pin 18: GPIO_196_I2S0_XCLK */
+ "[PCM_FS]", /* LSEC pin 16: GPIO_197_I2S0_XFS */
+ "",
+ "[I2S2_DO]";
+};
+
+&gpio25 {
+ /* GPIO_200-GPIO_207 */
+ gpio-line-names =
+ "[I2S2_XCLK]",
+ "[I2S2_XFS]",
+ "GPIO_202_PERST_ETH",
+ "GPIO_203_PWRON_DET",
+ "GPIO_204_PMU1_IRQ_N",
+ "GPIO_205_SD_DET",
+ "GPIO_206_GPS_MOTION_INT",
+ "GPIO_207_HDMI_SEL";
+};
+
+&gpio26 {
+ /* GPIO_208-GPIO_215 */
+ gpio-line-names =
+ "GPIO-A", /* LSEC pin 23: GPIO_208_WAKEUP_SOC */
+ "GPIO_209_VBUS_TYPEC",
+ "NC",
+ "NC",
+ "NC",
+ "[SPI0_SCLK]", /* LSEC pin 8: GPIO_213_SPI2_CLK */
+ "[SPI0_DIN]", /* LSEC pin 10: GPIO_214_SPI2_DI */
+ "[SPI0_DOUT]"; /* LSEC pin 14: GPIO_215_SPI2_DO */
+};
+
+&gpio27 {
+ /* GPIO_216-GPIO_223 */
+ gpio-line-names =
+ "[SPI0_CS]", /* LSEC pin 12: GPIO_216_SPI2_CS0_N */
+ "GPIO_217_HDMI_PD",
+ "GPIO_218_GPS_WAKEUP_AP",
+ "GPIO_219_M.2CLK_EN",
+ "GPIO_220_PERST_MINI",
+ "GPIO_221_CC_INT",
+ "[PCIE_CLKREQ_L]",
+ "NC";
+};
+
+&gpio28 {
+ /* GPIO_224-GPIO_231 */
+ gpio-line-names =
+ "[PMU0_INT]",
+ "[SPMI_DATA]",
+ "[SPMI_CLK]",
+ "[CAN_SPI_CLK]",
+ "[CAN_SPI_DI]",
+ "[CAN_SPI_DO]",
+ "[CAN_SPI_CS]",
+ "GPIO_231_HDMI_INT";
+};
+
+&uart0 {
+ /* On High speed expansion header */
+ label = "HS-UART0";
+ status = "okay";
+};
+
+&uart2 {
+ /* On Low speed expansion header */
+ label = "LS-UART0";
+ status = "okay";
+};
+
&uart6 {
+ /* On Low speed expansion header */
+ label = "LS-UART1";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
index c90e6f6..a5bd6d8 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
@@ -7,6 +7,7 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/hi3670-clock.h>
/ {
compatible = "hisilicon,hi3670";
@@ -144,19 +145,507 @@
#size-cells = <2>;
ranges;
- uart6_clk: clk_19_2M {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <19200000>;
+ crg_ctrl: crg_ctrl@fff35000 {
+ compatible = "hisilicon,hi3670-crgctrl", "syscon";
+ reg = <0x0 0xfff35000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ pctrl: pctrl@e8a09000 {
+ compatible = "hisilicon,hi3670-pctrl", "syscon";
+ reg = <0x0 0xe8a09000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ pmuctrl: crg_ctrl@fff34000 {
+ compatible = "hisilicon,hi3670-pmuctrl", "syscon";
+ reg = <0x0 0xfff34000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ sctrl: sctrl@fff0a000 {
+ compatible = "hisilicon,hi3670-sctrl", "syscon";
+ reg = <0x0 0xfff0a000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ iomcu: iomcu@ffd7e000 {
+ compatible = "hisilicon,hi3670-iomcu", "syscon";
+ reg = <0x0 0xffd7e000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ media1_crg: media1_crgctrl@e87ff000 {
+ compatible = "hisilicon,hi3670-media1-crg", "syscon";
+ reg = <0x0 0xe87ff000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ media2_crg: media2_crgctrl@e8900000 {
+ compatible = "hisilicon,hi3670-media2-crg","syscon";
+ reg = <0x0 0xe8900000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ uart0: serial@fdf02000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfdf02000 0x0 0x1000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3670_CLK_GATE_UART0>,
+ <&crg_ctrl HI3670_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
+ status = "disabled";
+ };
+
+ uart1: serial@fdf00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfdf00000 0x0 0x1000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3670_CLK_GATE_UART1>,
+ <&crg_ctrl HI3670_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ uart2: serial@fdf03000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfdf03000 0x0 0x1000>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3670_CLK_GATE_UART2>,
+ <&crg_ctrl HI3670_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
+ status = "disabled";
+ };
+
+ uart3: serial@ffd74000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xffd74000 0x0 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3670_CLK_GATE_UART3>,
+ <&crg_ctrl HI3670_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
+ status = "disabled";
+ };
+
+ uart4: serial@fdf01000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfdf01000 0x0 0x1000>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3670_CLK_GATE_UART4>,
+ <&crg_ctrl HI3670_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
+ status = "disabled";
+ };
+
+ uart5: serial@fdf05000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfdf05000 0x0 0x1000>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3670_CLK_GATE_UART5>,
+ <&crg_ctrl HI3670_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ status = "disabled";
};
uart6: serial@fff32000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfff32000 0x0 0x1000>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart6_clk &uart6_clk>;
+ clocks = <&crg_ctrl HI3670_CLK_UART6>,
+ <&crg_ctrl HI3670_PCLK>;
clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart6_pmx_func &uart6_cfg_func>;
status = "disabled";
};
+
+ gpio0: gpio@e8a0b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a0b000 0x0 0x1000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 1 0 1 &pmx0 3 1 5>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO0>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio1: gpio@e8a0c000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a0c000 0x0 0x1000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO1>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio2: gpio@e8a0d000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a0d000 0x0 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 1 6 7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO2>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio3: gpio@e8a0e000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a0e000 0x0 0x1000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 13 4 &pmx0 7 17 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO3>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio4: gpio@e8a0f000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a0f000 0x0 0x1000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 18 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO4>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio5: gpio@e8a10000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a10000 0x0 0x1000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 26 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO5>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio6: gpio@e8a11000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a11000 0x0 0x1000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 1 34 7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO6>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio7: gpio@e8a12000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a12000 0x0 0x1000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 41 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO7>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio8: gpio@e8a13000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a13000 0x0 0x1000>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 49 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO8>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio9: gpio@e8a14000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a14000 0x0 0x1000>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 57 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO9>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio10: gpio@e8a15000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a15000 0x0 0x1000>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 65 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO10>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio11: gpio@e8a16000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a16000 0x0 0x1000>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 73 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO11>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio12: gpio@e8a17000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a17000 0x0 0x1000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 81 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO12>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio13: gpio@e8a18000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a18000 0x0 0x1000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO13>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio14: gpio@e8a19000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a19000 0x0 0x1000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO14>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio15: gpio@e8a1a000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a1a000 0x0 0x1000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO15>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio16: gpio@e8a1b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a1b000 0x0 0x1000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx5 0 0 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO16>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio17: gpio@e8a1c000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a1c000 0x0 0x1000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx5 0 8 2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO17>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio18: gpio@fff28000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xfff28000 0x0 0x1000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx1 4 42 4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3670_PCLK_GPIO18>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio19: gpio@fff29000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xfff29000 0x0 0x1000>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx1 0 61 2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3670_PCLK_GPIO19>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio20: gpio@e8a1f000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a1f000 0x0 0x1000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx7 0 0 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO20>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio21: gpio@e8a20000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xe8a20000 0x0 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx7 0 8 4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3670_PCLK_GPIO21>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio22: gpio@fff0b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xfff0b000 0x0 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO176 */
+ gpio-ranges = <&pmx1 2 0 6>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3670_PCLK_AO_GPIO0>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio23: gpio@fff0c000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xfff0c000 0x0 0x1000>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO184 */
+ gpio-ranges = <&pmx1 0 6 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3670_PCLK_AO_GPIO1>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio24: gpio@fff0d000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xfff0d000 0x0 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO192 */
+ gpio-ranges = <&pmx1 0 14 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3670_PCLK_AO_GPIO2>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio25: gpio@fff0e000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xfff0e000 0x0 0x1000>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO200 */
+ gpio-ranges = <&pmx1 0 22 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3670_PCLK_AO_GPIO3>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio26: gpio@fff0f000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xfff0f000 0x0 0x1000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO208 */
+ gpio-ranges = <&pmx1 0 30 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3670_PCLK_AO_GPIO4>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio27: gpio@fff10000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xfff10000 0x0 0x1000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO216 */
+ gpio-ranges = <&pmx1 4 31 4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3670_PCLK_AO_GPIO5>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio28: gpio@fff1d000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x0 0xfff1d000 0x0 0x1000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx1 1 35 7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3670_PCLK_AO_GPIO6>;
+ clock-names = "apb_pclk";
+ };
};
};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
index d30f6eb8..32716c96 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
@@ -35,30 +35,31 @@
compatible = "gpio-leds";
user-led0 {
- label = "USER-LED0";
+ label = "green:user1";
gpios = <&gpio6 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
user-led1 {
- label = "USER-LED1";
+ label = "green:user2";
gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "mmc0";
default-state = "off";
};
user-led2 {
- label = "USER-LED2";
+ label = "green:user3";
gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
+ linux,default-trigger = "mmc1";
default-state = "off";
};
user-led3 {
- label = "USER-LED3";
+ label = "green:user4";
gpios = <&gpio10 6 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "cpu0";
+ linux,default-trigger = "none";
+ panic-indicator;
default-state = "off";
};
};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index f4964bee..6102350 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -340,42 +340,43 @@
leds {
compatible = "gpio-leds";
- user_led4 {
- label = "user_led4";
+
+ user_led1 {
+ label = "green:user1";
gpios = <&gpio4 0 0>; /* <&gpio_user_led_1>; */
linux,default-trigger = "heartbeat";
};
- user_led3 {
- label = "user_led3";
+ user_led2 {
+ label = "green:user2";
gpios = <&gpio4 1 0>; /* <&gpio_user_led_2>; */
linux,default-trigger = "mmc0";
};
- user_led2 {
- label = "user_led2";
+ user_led3 {
+ label = "green:user3";
gpios = <&gpio4 2 0>; /* <&gpio_user_led_3>; */
linux,default-trigger = "mmc1";
};
- user_led1 {
- label = "user_led1";
+ user_led4 {
+ label = "green:user4";
gpios = <&gpio4 3 0>; /* <&gpio_user_led_4>; */
panic-indicator;
- linux,default-trigger = "cpu0";
+ linux,default-trigger = "none";
};
wlan_active_led {
- label = "wifi_active";
+ label = "yellow:wlan";
gpios = <&gpio3 5 0>; /* <&gpio_wlan_active_led>; */
linux,default-trigger = "phy0tx";
default-state = "off";
};
bt_active_led {
- label = "bt_active";
+ label = "blue:bt";
gpios = <&gpio4 7 0>; /* <&gpio_bt_active_led>; */
- linux,default-trigger = "hci0rx";
+ linux,default-trigger = "hci0-power";
default-state = "off";
};
};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 97d5bf2..aec9e37 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -893,7 +893,14 @@
cooling-maps {
map0 {
trip = <&target>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi
new file mode 100644
index 0000000..67bb52d
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Pinctrl dts file for HiSilicon HiKey970 development board
+ */
+
+#include <dt-bindings/pinctrl/hisi.h>
+
+/ {
+ soc {
+ range: gpio-range {
+ #pinctrl-single,gpio-range-cells = <3>;
+ };
+
+ pmx0: pinmux@e896c000 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0xe896c000 0x0 0x72c>;
+ #pinctrl-cells = <1>;
+ #gpio-range-cells = <0x3>;
+ pinctrl-single,register-width = <0x20>;
+ pinctrl-single,function-mask = <0x7>;
+ /* pin base, nr pins & gpio function */
+ pinctrl-single,gpio-range = <&range 0 82 0>;
+
+ uart0_pmx_func: uart0_pmx_func {
+ pinctrl-single,pins = <
+ 0x054 MUX_M2 /* UART0_RXD */
+ 0x058 MUX_M2 /* UART0_TXD */
+ >;
+ };
+
+ uart2_pmx_func: uart2_pmx_func {
+ pinctrl-single,pins = <
+ 0x700 MUX_M2 /* UART2_CTS_N */
+ 0x704 MUX_M2 /* UART2_RTS_N */
+ 0x708 MUX_M2 /* UART2_RXD */
+ 0x70c MUX_M2 /* UART2_TXD */
+ >;
+ };
+
+ uart3_pmx_func: uart3_pmx_func {
+ pinctrl-single,pins = <
+ 0x064 MUX_M1 /* UART3_CTS_N */
+ 0x068 MUX_M1 /* UART3_RTS_N */
+ 0x06c MUX_M1 /* UART3_RXD */
+ 0x070 MUX_M1 /* UART3_TXD */
+ >;
+ };
+
+ uart4_pmx_func: uart4_pmx_func {
+ pinctrl-single,pins = <
+ 0x074 MUX_M1 /* UART4_CTS_N */
+ 0x078 MUX_M1 /* UART4_RTS_N */
+ 0x07c MUX_M1 /* UART4_RXD */
+ 0x080 MUX_M1 /* UART4_TXD */
+ >;
+ };
+
+ uart6_pmx_func: uart6_pmx_func {
+ pinctrl-single,pins = <
+ 0x05c MUX_M1 /* UART6_RXD */
+ 0x060 MUX_M1 /* UART6_TXD */
+ >;
+ };
+ };
+
+ pmx2: pinmux@e896c800 {
+ compatible = "pinconf-single";
+ reg = <0x0 0xe896c800 0x0 0x72c>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <0x20>;
+
+ uart0_cfg_func: uart0_cfg_func {
+ pinctrl-single,pins = <
+ 0x058 0x0 /* UART0_RXD */
+ 0x05c 0x0 /* UART0_TXD */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
+
+ uart2_cfg_func: uart2_cfg_func {
+ pinctrl-single,pins = <
+ 0x700 0x0 /* UART2_CTS_N */
+ 0x704 0x0 /* UART2_RTS_N */
+ 0x708 0x0 /* UART2_RXD */
+ 0x70c 0x0 /* UART2_TXD */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
+
+ uart3_cfg_func: uart3_cfg_func {
+ pinctrl-single,pins = <
+ 0x068 0x0 /* UART3_CTS_N */
+ 0x06c 0x0 /* UART3_RTS_N */
+ 0x070 0x0 /* UART3_RXD */
+ 0x074 0x0 /* UART3_TXD */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
+
+ uart4_cfg_func: uart4_cfg_func {
+ pinctrl-single,pins = <
+ 0x078 0x0 /* UART4_CTS_N */
+ 0x07c 0x0 /* UART4_RTS_N */
+ 0x080 0x0 /* UART4_RXD */
+ 0x084 0x0 /* UART4_TXD */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
+
+ uart6_cfg_func: uart6_cfg_func {
+ pinctrl-single,pins = <
+ 0x060 0x0 /* UART6_RXD */
+ 0x064 0x0 /* UART6_TXD */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+ };
+
+ pmx5: pinmux@fc182000 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0xfc182000 0x0 0x028>;
+ #gpio-range-cells = <3>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <0x20>;
+ pinctrl-single,function-mask = <0x7>;
+ /* pin base, nr pins & gpio function */
+ pinctrl-single,gpio-range = <&range 0 10 0>;
+
+ };
+
+ pmx6: pinmux@fc182800 {
+ compatible = "pinconf-single";
+ reg = <0x0 0xfc182800 0x0 0x028>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <0x20>;
+ };
+
+ pmx7: pinmux@ff37e000 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0xff37e000 0x0 0x030>;
+ #gpio-range-cells = <3>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <0x20>;
+ pinctrl-single,function-mask = <7>;
+ /* pin base, nr pins & gpio function */
+ pinctrl-single,gpio-range = <&range 0 12 0>;
+ };
+
+ pmx8: pinmux@ff37e800 {
+ compatible = "pinconf-single";
+ reg = <0x0 0xff37e800 0x0 0x030>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <0x20>;
+ };
+
+ pmx1: pinmux@fff11000 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0xfff11000 0x0 0x73c>;
+ #gpio-range-cells = <0x3>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <0x20>;
+ pinctrl-single,function-mask = <0x7>;
+ /* pin base, nr pins & gpio function */
+ pinctrl-single,gpio-range = <&range 0 46 0>;
+ };
+
+ pmx16: pinmux@fff11800 {
+ compatible = "pinconf-single";
+ reg = <0x0 0xfff11800 0x0 0x73c>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <0x20>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index eca8bac6..2eff1f9 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -6,4 +6,5 @@
dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin-singleshot.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
index 3ab25ad..846003b 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -60,9 +60,31 @@
cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
marvell,pad-type = "sd";
vqmmc-supply = <&vcc_sd_reg1>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio_pins>;
status = "okay";
};
+/* U11 */
+&sdhci0 {
+ non-removable;
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ marvell,xenon-emmc;
+ marvell,xenon-tun-count = <9>;
+ marvell,pad-type = "fixed-1-8v";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc_pins>;
+/*
+ * This eMMC is not populated on all boards, so disable it by
+ * default and let the bootloader enable it, if it is present
+ */
+ status = "disabled";
+};
+
&spi0 {
status = "okay";
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 4472bcd..e05594e 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -234,6 +234,11 @@
groups = "uart2";
function = "uart";
};
+
+ mmc_pins: mmc-pins {
+ groups = "emmc_nb";
+ function = "emmc";
+ };
};
nb_pm: syscon@14000 {
@@ -266,6 +271,11 @@
function = "mii";
};
+ sdio_pins: sdio-pins {
+ groups = "sdio_sb";
+ function = "sdio";
+ };
+
};
eth0: ethernet@30000 {
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 9473d40..5b4a960 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -42,7 +42,7 @@
v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
compatible = "regulator-fixed";
- gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
+ gpio = <&cp0_gpio2 15 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&cp0_xhci_vbus_pins>;
regulator-name = "v_5v0_usb3_hst_vbus";
@@ -246,6 +246,18 @@
gpios = <1 GPIO_ACTIVE_HIGH>;
output-high;
};
+
+ lte_reset {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_LOW>;
+ output-low;
+ };
+
+ lte_disable {
+ gpio-hog;
+ gpios = <21 GPIO_ACTIVE_LOW>;
+ output-low;
+ };
};
&cp0_ethernet {
@@ -270,6 +282,10 @@
vqmmc-supply = <&v_3_3>;
};
+&cp0_usb3_1 {
+ status = "okay";
+};
+
&cp1_pinctrl {
/*
* MPP Bus:
@@ -333,6 +349,10 @@
*/
marvell,reg-init = <3 16 0 0x1017>;
reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_copper_eth_phy_reset>;
+ reset-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
};
switch0: switch0@4 {
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
new file mode 100644
index 0000000..c3e18fd
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for MACCHIATOBin Armada 8040 community board platform
+ */
+
+#include "armada-8040-mcbin.dtsi"
+
+/ {
+ model = "Marvell 8040 MACCHIATOBin Single-shot";
+ compatible = "marvell,armada8040-mcbin-singleshot",
+ "marvell,armada8040-mcbin", "marvell,armada8040",
+ "marvell,armada-ap806-quad", "marvell,armada-ap806";
+};
+
+&cp0_eth0 {
+ status = "okay";
+ phy-mode = "10gbase-kr";
+ managed = "in-band-status";
+ sfp = <&sfp_eth0>;
+};
+
+&cp1_eth0 {
+ status = "okay";
+ phy-mode = "10gbase-kr";
+ managed = "in-band-status";
+ sfp = <&sfp_eth1>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index 56fa448..d06f5ab 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -5,226 +5,13 @@
* Device Tree file for MACCHIATOBin Armada 8040 community board platform
*/
-#include "armada-8040.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
+#include "armada-8040-mcbin.dtsi"
/ {
- model = "Marvell 8040 MACCHIATOBin";
- compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
+ model = "Marvell 8040 MACCHIATOBin Double-shot";
+ compatible = "marvell,armada8040-mcbin-doubleshot",
+ "marvell,armada8040-mcbin", "marvell,armada8040",
"marvell,armada-ap806-quad", "marvell,armada-ap806";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- aliases {
- ethernet0 = &cp0_eth0;
- ethernet1 = &cp1_eth0;
- ethernet2 = &cp1_eth1;
- ethernet3 = &cp1_eth2;
- };
-
- /* Regulator labels correspond with schematics */
- v_3_3: regulator-3-3v {
- compatible = "regulator-fixed";
- regulator-name = "v_3_3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- status = "okay";
- };
-
- v_vddo_h: regulator-1-8v {
- compatible = "regulator-fixed";
- regulator-name = "v_vddo_h";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- status = "okay";
- };
-
- v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_xhci_vbus_pins>;
- regulator-name = "v_5v0_usb3_hst_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- status = "okay";
- };
-
- usb3h0_phy: usb3_phy0 {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&v_5v0_usb3_hst_vbus>;
- };
-
- sfp_eth0: sfp-eth0 {
- /* CON15,16 - CPM lane 4 */
- compatible = "sff,sfp";
- i2c-bus = <&sfpp0_i2c>;
- los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_sfpp0_pins>;
- };
-
- sfp_eth1: sfp-eth1 {
- /* CON17,18 - CPS lane 4 */
- compatible = "sff,sfp";
- i2c-bus = <&sfpp1_i2c>;
- los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
- };
-
- sfp_eth3: sfp-eth3 {
- /* CON13,14 - CPS lane 5 */
- compatible = "sff,sfp";
- i2c-bus = <&sfp_1g_i2c>;
- los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
- };
-};
-
-&uart0 {
- status = "okay";
- pinctrl-0 = <&uart0_pins>;
- pinctrl-names = "default";
-};
-
-&ap_sdhci0 {
- bus-width = <8>;
- /*
- * Not stable in HS modes - phy needs "more calibration", so add
- * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
- */
- marvell,xenon-phy-slow-mode;
- no-1-8-v;
- no-sd;
- no-sdio;
- non-removable;
- status = "okay";
- vqmmc-supply = <&v_vddo_h>;
-};
-
-&cp0_i2c0 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c0_pins>;
- status = "okay";
-};
-
-&cp0_i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c1_pins>;
- status = "okay";
-
- i2c-switch@70 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
-
- sfpp0_i2c: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
- sfpp1_i2c: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
- sfp_1g_i2c: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
- };
-};
-
-/* J25 UART header */
-&cp0_uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_uart1_pins>;
- status = "okay";
-};
-
-&cp0_mdio {
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_ge_mdio_pins>;
- status = "okay";
-
- ge_phy: ethernet-phy@0 {
- reg = <0>;
- };
-};
-
-&cp0_pcie0 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_pcie_pins>;
- num-lanes = <4>;
- num-viewport = <8>;
- reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&cp0_pinctrl {
- cp0_ge_mdio_pins: ge-mdio-pins {
- marvell,pins = "mpp32", "mpp34";
- marvell,function = "ge";
- };
- cp0_i2c1_pins: i2c1-pins {
- marvell,pins = "mpp35", "mpp36";
- marvell,function = "i2c1";
- };
- cp0_i2c0_pins: i2c0-pins {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
- cp0_uart1_pins: uart1-pins {
- marvell,pins = "mpp40", "mpp41";
- marvell,function = "uart1";
- };
- cp0_xhci_vbus_pins: xhci0-vbus-pins {
- marvell,pins = "mpp47";
- marvell,function = "gpio";
- };
- cp0_sfp_1g_pins: sfp-1g-pins {
- marvell,pins = "mpp51", "mpp53", "mpp54";
- marvell,function = "gpio";
- };
- cp0_pcie_pins: pcie-pins {
- marvell,pins = "mpp52";
- marvell,function = "gpio";
- };
- cp0_sdhci_pins: sdhci-pins {
- marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
- "mpp60", "mpp61";
- marvell,function = "sdio";
- };
- cp0_sfpp1_pins: sfpp1-pins {
- marvell,pins = "mpp62";
- marvell,function = "gpio";
- };
};
&cp0_xmdio {
@@ -243,46 +30,11 @@
};
};
-&cp0_ethernet {
- status = "okay";
-};
-
&cp0_eth0 {
status = "okay";
/* Network PHY */
phy = <&phy0>;
phy-mode = "10gbase-kr";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp0_comphy4 0>;
-};
-
-&cp0_sata0 {
- /* CPM Lane 0 - U29 */
- status = "okay";
-};
-
-&cp0_sdhci0 {
- /* U6 */
- broken-cd;
- bus-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_sdhci_pins>;
- status = "okay";
- vqmmc-supply = <&v_3_3>;
-};
-
-&cp0_usb3_0 {
- /* J38? - USB2.0 only */
- status = "okay";
-};
-
-&cp0_usb3_1 {
- /* J38? - USB2.0 only */
- status = "okay";
-};
-
-&cp1_ethernet {
- status = "okay";
};
&cp1_eth0 {
@@ -290,81 +42,4 @@
/* Network PHY */
phy = <&phy8>;
phy-mode = "10gbase-kr";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp1_comphy4 0>;
-};
-
-&cp1_eth1 {
- /* CPS Lane 0 - J5 (Gigabit RJ45) */
- status = "okay";
- /* Network PHY */
- phy = <&ge_phy>;
- phy-mode = "sgmii";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp1_comphy0 1>;
-};
-
-&cp1_eth2 {
- /* CPS Lane 5 */
- status = "okay";
- /* Network PHY */
- phy-mode = "2500base-x";
- managed = "in-band-status";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp1_comphy5 2>;
- sfp = <&sfp_eth3>;
-};
-
-&cp1_pinctrl {
- cp1_sfpp1_pins: sfpp1-pins {
- marvell,pins = "mpp8", "mpp10", "mpp11";
- marvell,function = "gpio";
- };
- cp1_spi1_pins: spi1-pins {
- marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
- marvell,function = "spi1";
- };
- cp1_uart0_pins: uart0-pins {
- marvell,pins = "mpp6", "mpp7";
- marvell,function = "uart0";
- };
- cp1_sfp_1g_pins: sfp-1g-pins {
- marvell,pins = "mpp24";
- marvell,function = "gpio";
- };
- cp1_sfpp0_pins: sfpp0-pins {
- marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
- marvell,function = "gpio";
- };
-};
-
-/* J27 UART header */
-&cp1_uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_uart0_pins>;
- status = "okay";
-};
-
-&cp1_sata0 {
- /* CPS Lane 1 - U32 */
- /* CPS Lane 3 - U31 */
- status = "okay";
-};
-
-&cp1_spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_spi1_pins>;
- status = "okay";
-
- spi-flash@0 {
- compatible = "st,w25q32";
- spi-max-frequency = <50000000>;
- reg = <0>;
- };
-};
-
-&cp1_usb3_0 {
- /* CPS Lane 2 - CON7 */
- usb-phy = <&usb3h0_phy>;
- status = "okay";
};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
new file mode 100644
index 0000000..29ea7e8
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for MACCHIATOBin Armada 8040 community board platform
+ */
+
+#include "armada-8040.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Marvell 8040 MACCHIATOBin";
+ compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
+ "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ aliases {
+ ethernet0 = &cp0_eth0;
+ ethernet1 = &cp1_eth0;
+ ethernet2 = &cp1_eth1;
+ ethernet3 = &cp1_eth2;
+ };
+
+ /* Regulator labels correspond with schematics */
+ v_3_3: regulator-3-3v {
+ compatible = "regulator-fixed";
+ regulator-name = "v_3_3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ status = "okay";
+ };
+
+ v_vddo_h: regulator-1-8v {
+ compatible = "regulator-fixed";
+ regulator-name = "v_vddo_h";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ status = "okay";
+ };
+
+ v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_xhci_vbus_pins>;
+ regulator-name = "v_5v0_usb3_hst_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ status = "okay";
+ };
+
+ usb3h0_phy: usb3_phy0 {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&v_5v0_usb3_hst_vbus>;
+ };
+
+ sfp_eth0: sfp-eth0 {
+ /* CON15,16 - CPM lane 4 */
+ compatible = "sff,sfp";
+ i2c-bus = <&sfpp0_i2c>;
+ los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_sfpp0_pins>;
+ };
+
+ sfp_eth1: sfp-eth1 {
+ /* CON17,18 - CPS lane 4 */
+ compatible = "sff,sfp";
+ i2c-bus = <&sfpp1_i2c>;
+ los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
+ };
+
+ sfp_eth3: sfp-eth3 {
+ /* CON13,14 - CPS lane 5 */
+ compatible = "sff,sfp";
+ i2c-bus = <&sfp_1g_i2c>;
+ los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+};
+
+&ap_sdhci0 {
+ bus-width = <8>;
+ /*
+ * Not stable in HS modes - phy needs "more calibration", so add
+ * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
+ */
+ marvell,xenon-phy-slow-mode;
+ no-1-8-v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ status = "okay";
+ vqmmc-supply = <&v_vddo_h>;
+};
+
+&cp0_i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c0_pins>;
+ status = "okay";
+};
+
+&cp0_i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c1_pins>;
+ status = "okay";
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ sfpp0_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ sfpp1_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ sfp_1g_i2c: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ };
+};
+
+/* J25 UART header */
+&cp0_uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_uart1_pins>;
+ status = "okay";
+};
+
+&cp0_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_ge_mdio_pins>;
+ status = "okay";
+
+ ge_phy: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&cp0_pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_pcie_pins>;
+ num-lanes = <4>;
+ num-viewport = <8>;
+ reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&cp0_pinctrl {
+ cp0_ge_mdio_pins: ge-mdio-pins {
+ marvell,pins = "mpp32", "mpp34";
+ marvell,function = "ge";
+ };
+ cp0_i2c1_pins: i2c1-pins {
+ marvell,pins = "mpp35", "mpp36";
+ marvell,function = "i2c1";
+ };
+ cp0_i2c0_pins: i2c0-pins {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cp0_uart1_pins: uart1-pins {
+ marvell,pins = "mpp40", "mpp41";
+ marvell,function = "uart1";
+ };
+ cp0_xhci_vbus_pins: xhci0-vbus-pins {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ cp0_sfp_1g_pins: sfp-1g-pins {
+ marvell,pins = "mpp51", "mpp53", "mpp54";
+ marvell,function = "gpio";
+ };
+ cp0_pcie_pins: pcie-pins {
+ marvell,pins = "mpp52";
+ marvell,function = "gpio";
+ };
+ cp0_sdhci_pins: sdhci-pins {
+ marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
+ "mpp60", "mpp61";
+ marvell,function = "sdio";
+ };
+ cp0_sfpp1_pins: sfpp1-pins {
+ marvell,pins = "mpp62";
+ marvell,function = "gpio";
+ };
+};
+
+&cp0_ethernet {
+ status = "okay";
+};
+
+&cp0_eth0 {
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp0_comphy4 0>;
+};
+
+&cp0_sata0 {
+ /* CPM Lane 0 - U29 */
+ status = "okay";
+};
+
+&cp0_sdhci0 {
+ /* U6 */
+ broken-cd;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_sdhci_pins>;
+ status = "okay";
+ vqmmc-supply = <&v_3_3>;
+};
+
+&cp0_usb3_0 {
+ /* J38? - USB2.0 only */
+ status = "okay";
+};
+
+&cp0_usb3_1 {
+ /* J38? - USB2.0 only */
+ status = "okay";
+};
+
+&cp1_ethernet {
+ status = "okay";
+};
+
+&cp1_eth0 {
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy4 0>;
+};
+
+&cp1_eth1 {
+ /* CPS Lane 0 - J5 (Gigabit RJ45) */
+ status = "okay";
+ /* Network PHY */
+ phy = <&ge_phy>;
+ phy-mode = "sgmii";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy0 1>;
+};
+
+&cp1_eth2 {
+ /* CPS Lane 5 */
+ status = "okay";
+ /* Network PHY */
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy5 2>;
+ sfp = <&sfp_eth3>;
+};
+
+&cp1_pinctrl {
+ cp1_sfpp1_pins: sfpp1-pins {
+ marvell,pins = "mpp8", "mpp10", "mpp11";
+ marvell,function = "gpio";
+ };
+ cp1_spi1_pins: spi1-pins {
+ marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+ cp1_uart0_pins: uart0-pins {
+ marvell,pins = "mpp6", "mpp7";
+ marvell,function = "uart0";
+ };
+ cp1_sfp_1g_pins: sfp-1g-pins {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+ cp1_sfpp0_pins: sfpp0-pins {
+ marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
+ marvell,function = "gpio";
+ };
+};
+
+/* J27 UART header */
+&cp1_uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_uart0_pins>;
+ status = "okay";
+};
+
+&cp1_sata0 {
+ /* CPS Lane 1 - U32 */
+ /* CPS Lane 3 - U31 */
+ status = "okay";
+};
+
+&cp1_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_spi1_pins>;
+ status = "okay";
+
+ spi-flash@0 {
+ compatible = "st,w25q32";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+};
+
+&cp1_usb3_0 {
+ /* CPS Lane 2 - CON7 */
+ usb-phy = <&usb3h0_phy>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index abd2f15..412ffd4 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -18,6 +18,7 @@
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/mt8173-power.h>
#include <dt-bindings/reset/mt8173-resets.h>
+#include <dt-bindings/gce/mt8173-gce.h>
#include "mt8173-pinfunc.h"
/ {
@@ -521,6 +522,15 @@
status = "disabled";
};
+ gce: mailbox@10212000 {
+ compatible = "mediatek,mt8173-gce";
+ reg = <0 0x10212000 0 0x1000>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_GCE>;
+ clock-names = "gce";
+ #mbox-cells = <3>;
+ };
+
mipi_tx0: mipi-dphy@10215000 {
compatible = "mediatek,mt8173-mipi-tx";
reg = <0 0x10215000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index bd5305a..65487ee 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -2,6 +2,7 @@
/dts-v1/;
#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
#include "tegra186-p3310.dtsi"
@@ -50,6 +51,10 @@
vmmc-supply = <&vdd_sd>;
};
+ hda@3510000 {
+ status = "okay";
+ };
+
pcie@10003000 {
status = "okay";
@@ -121,6 +126,7 @@
linux,input-type = <EV_KEY>;
linux,code = <KEY_POWER>;
debounce-interval = <10>;
+ wakeup-event-action = <EV_ACT_ASSERTED>;
wakeup-source;
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index 13f57ff..b539561e78 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -124,6 +124,10 @@
status = "okay";
};
+ rtc@c2a0000 {
+ status = "okay";
+ };
+
pmc@c360000 {
nvidia,invert-interrupt;
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 2f3c8e2..22815db 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -237,6 +237,7 @@
clock-names = "sdhci";
resets = <&bpmp TEGRA186_RESET_SDMMC1>;
reset-names = "sdhci";
+ iommus = <&smmu TEGRA186_SID_SDMMC1>;
pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
pinctrl-0 = <&sdmmc1_3v3>;
pinctrl-1 = <&sdmmc1_1v8>;
@@ -262,6 +263,7 @@
clock-names = "sdhci";
resets = <&bpmp TEGRA186_RESET_SDMMC2>;
reset-names = "sdhci";
+ iommus = <&smmu TEGRA186_SID_SDMMC2>;
pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
pinctrl-0 = <&sdmmc2_3v3>;
pinctrl-1 = <&sdmmc2_1v8>;
@@ -282,6 +284,7 @@
clock-names = "sdhci";
resets = <&bpmp TEGRA186_RESET_SDMMC3>;
reset-names = "sdhci";
+ iommus = <&smmu TEGRA186_SID_SDMMC3>;
pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
pinctrl-0 = <&sdmmc3_3v3>;
pinctrl-1 = <&sdmmc3_1v8>;
@@ -307,6 +310,7 @@
assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLC4_VCO>;
resets = <&bpmp TEGRA186_RESET_SDMMC4>;
reset-names = "sdhci";
+ iommus = <&smmu TEGRA186_SID_SDMMC4>;
nvidia,pad-autocal-pull-up-offset-hs400 = <0x05>;
nvidia,pad-autocal-pull-down-offset-hs400 = <0x05>;
nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>;
@@ -318,6 +322,22 @@
status = "disabled";
};
+ hda@3510000 {
+ compatible = "nvidia,tegra186-hda", "nvidia,tegra30-hda";
+ reg = <0x0 0x03510000 0x0 0x10000>;
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA186_CLK_HDA>,
+ <&bpmp TEGRA186_CLK_HDA2HDMICODEC>,
+ <&bpmp TEGRA186_CLK_HDA2CODEC_2X>;
+ clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+ resets = <&bpmp TEGRA186_RESET_HDA>,
+ <&bpmp TEGRA186_RESET_HDA2HDMICODEC>,
+ <&bpmp TEGRA186_RESET_HDA2CODEC_2X>;
+ reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+ status = "disabled";
+ };
+
fuse@3820000 {
compatible = "nvidia,tegra186-efuse";
reg = <0x0 0x03820000 0x0 0x10000>;
@@ -336,6 +356,15 @@
interrupt-parent = <&gic>;
};
+ cec@3960000 {
+ compatible = "nvidia,tegra186-cec";
+ reg = <0x0 0x03960000 0x0 0x10000>;
+ interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA186_CLK_CEC>;
+ clock-names = "cec";
+ status = "disabled";
+ };
+
hsp_top0: hsp@3c00000 {
compatible = "nvidia,tegra186-hsp";
reg = <0x0 0x03c00000 0x0 0xa0000>;
@@ -395,6 +424,16 @@
status = "disabled";
};
+ rtc: rtc@c2a0000 {
+ compatible = "nvidia,tegra186-rtc", "nvidia,tegra20-rtc";
+ reg = <0 0x0c2a0000 0 0x10000>;
+ interrupt-parent = <&pmc>;
+ interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA186_CLK_CLK_32K>;
+ clock-names = "rtc";
+ status = "disabled";
+ };
+
gpio_aon: gpio@c2f0000 {
compatible = "nvidia,tegra186-gpio-aon";
reg-names = "security", "gpio";
@@ -407,7 +446,7 @@
#interrupt-cells = <2>;
};
- pmc@c360000 {
+ pmc: pmc@c360000 {
compatible = "nvidia,tegra186-pmc";
reg = <0 0x0c360000 0 0x10000>,
<0 0x0c370000 0 0x10000>,
@@ -415,6 +454,9 @@
<0 0x0c390000 0 0x10000>;
reg-names = "pmc", "wake", "aotag", "scratch";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
sdmmc1_3v3: sdmmc1-3v3 {
pins = "sdmmc1-hv";
power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
@@ -660,6 +702,7 @@
display-hub@15200000 {
compatible = "nvidia,tegra186-display", "simple-bus";
+ reg = <0x15200000 0x00040000>;
resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>,
<&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>,
<&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP1>,
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index 57d3f00..22a1c26 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -66,6 +66,10 @@
vmmc-supply = <&vdd_emmc_3v3>;
};
+ rtc@c2a0000 {
+ status = "okay";
+ };
+
pmc@c360000 {
nvidia,invert-interrupt;
};
@@ -163,7 +167,7 @@
in-ldo4-6-supply = <&vdd_5v0_sys>;
in-ldo7-8-supply = <&vdd_1v8ls>;
- sd0 {
+ vdd_1v0: sd0 {
regulator-name = "VDD_1V0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
@@ -171,7 +175,7 @@
regulator-boot-on;
};
- sd1 {
+ vdd_1v8hs: sd1 {
regulator-name = "VDD_1V8HS";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -244,6 +248,17 @@
};
};
};
+
+ temperature-sensor@4c {
+ compatible = "ti,tmp451";
+ reg = <0x4c>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA194_MAIN_GPIO(H, 2)
+ IRQ_TYPE_LEVEL_LOW>;
+
+ #thermal-sensor-cells = <1>;
+ };
};
};
@@ -262,5 +277,16 @@
regulator-always-on;
regulator-boot-on;
};
+
+ vdd_hdmi: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+
+ regulator-name = "VDD_5V0_HDMI_CON";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index 9ff3c18..adf3510 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -1,10 +1,13 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+
#include "tegra194-p2888.dtsi"
/ {
- model = "NVIDIA Tegra194 P2972-0000 Development Board";
+ model = "NVIDIA Jetson AGX Xavier Development Kit";
compatible = "nvidia,p2972-0000", "nvidia,tegra194";
cbb {
@@ -12,5 +15,157 @@
sdhci@3400000 {
status = "okay";
};
+
+ ddc: i2c@31c0000 {
+ status = "okay";
+ };
+
+ pwm@c340000 {
+ status = "okay";
+ };
+
+ hda@3510000 {
+ status = "okay";
+ };
+
+ host1x@13e00000 {
+ display-hub@15200000 {
+ status = "okay";
+ };
+
+ dpaux@155e0000 {
+ status = "okay";
+ };
+
+ sor@15b80000 {
+ status = "okay";
+
+ avdd-io-supply = <&vdd_1v0>;
+ vdd-pll-supply = <&vdd_1v8hs>;
+ hdmi-supply = <&vdd_hdmi>;
+
+ nvidia,ddc-i2c-bus = <&ddc>;
+ nvidia,hpd-gpio = <&gpio TEGRA194_MAIN_GPIO(M, 2)
+ GPIO_ACTIVE_LOW>;
+ };
+ };
+ };
+
+ fan: fan {
+ compatible = "pwm-fan";
+ pwms = <&pwm4 0 45334>;
+
+ cooling-levels = <0 64 128 255>;
+ cooling-min-state = <0>;
+ cooling-max-state = <3>;
+ #cooling-cells = <2>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ force-recovery {
+ label = "Force Recovery";
+ gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0)
+ GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_1>;
+ debounce-interval = <10>;
+ };
+
+ power {
+ label = "Power";
+ gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4)
+ GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_KEY>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <10>;
+ wakeup-event-action = <EV_ACT_ASSERTED>;
+ wakeup-source;
+ };
+ };
+
+ thermal-zones {
+ cpu {
+ polling-delay = <0>;
+ polling-delay-passive = <500>;
+ status = "okay";
+
+ trips {
+ cpu_trip_critical: critical {
+ temperature = <96500>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+
+ cpu_trip_hot: hot {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_trip_active: active {
+ temperature = <50000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_trip_passive: passive {
+ temperature = <30000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ cpu-critical {
+ cooling-device = <&fan 3 3>;
+ trip = <&cpu_trip_critical>;
+ };
+
+ cpu-hot {
+ cooling-device = <&fan 2 2>;
+ trip = <&cpu_trip_hot>;
+ };
+
+ cpu-active {
+ cooling-device = <&fan 1 1>;
+ trip = <&cpu_trip_active>;
+ };
+
+ cpu-passive {
+ cooling-device = <&fan 0 0>;
+ trip = <&cpu_trip_passive>;
+ };
+ };
+ };
+
+ gpu {
+ polling-delay = <0>;
+ polling-delay-passive = <500>;
+ status = "okay";
+
+ trips {
+ gpu_alert0: critical {
+ temperature = <99000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ aux {
+ polling-delay = <0>;
+ polling-delay-passive = <500>;
+ status = "okay";
+
+ trips {
+ aux_alert0: critical {
+ temperature = <90000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
};
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 9fc14bb..6dfa1ca 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -4,6 +4,8 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/tegra186-hsp.h>
#include <dt-bindings/reset/tegra194-reset.h>
+#include <dt-bindings/power/tegra194-powergate.h>
+#include <dt-bindings/thermal/tegra194-bpmp-thermal.h>
/ {
compatible = "nvidia,tegra194";
@@ -209,6 +211,90 @@
status = "disabled";
};
+ pwm1: pwm@3280000 {
+ compatible = "nvidia,tegra194-pwm",
+ "nvidia,tegra186-pwm";
+ reg = <0x3280000 0x10000>;
+ clocks = <&bpmp TEGRA194_CLK_PWM1>;
+ clock-names = "pwm";
+ resets = <&bpmp TEGRA194_RESET_PWM1>;
+ reset-names = "pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ };
+
+ pwm2: pwm@3290000 {
+ compatible = "nvidia,tegra194-pwm",
+ "nvidia,tegra186-pwm";
+ reg = <0x3290000 0x10000>;
+ clocks = <&bpmp TEGRA194_CLK_PWM2>;
+ clock-names = "pwm";
+ resets = <&bpmp TEGRA194_RESET_PWM2>;
+ reset-names = "pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ };
+
+ pwm3: pwm@32a0000 {
+ compatible = "nvidia,tegra194-pwm",
+ "nvidia,tegra186-pwm";
+ reg = <0x32a0000 0x10000>;
+ clocks = <&bpmp TEGRA194_CLK_PWM3>;
+ clock-names = "pwm";
+ resets = <&bpmp TEGRA194_RESET_PWM3>;
+ reset-names = "pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ };
+
+ pwm5: pwm@32c0000 {
+ compatible = "nvidia,tegra194-pwm",
+ "nvidia,tegra186-pwm";
+ reg = <0x32c0000 0x10000>;
+ clocks = <&bpmp TEGRA194_CLK_PWM5>;
+ clock-names = "pwm";
+ resets = <&bpmp TEGRA194_RESET_PWM5>;
+ reset-names = "pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ };
+
+ pwm6: pwm@32d0000 {
+ compatible = "nvidia,tegra194-pwm",
+ "nvidia,tegra186-pwm";
+ reg = <0x32d0000 0x10000>;
+ clocks = <&bpmp TEGRA194_CLK_PWM6>;
+ clock-names = "pwm";
+ resets = <&bpmp TEGRA194_RESET_PWM6>;
+ reset-names = "pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ };
+
+ pwm7: pwm@32e0000 {
+ compatible = "nvidia,tegra194-pwm",
+ "nvidia,tegra186-pwm";
+ reg = <0x32e0000 0x10000>;
+ clocks = <&bpmp TEGRA194_CLK_PWM7>;
+ clock-names = "pwm";
+ resets = <&bpmp TEGRA194_RESET_PWM7>;
+ reset-names = "pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ };
+
+ pwm8: pwm@32f0000 {
+ compatible = "nvidia,tegra194-pwm",
+ "nvidia,tegra186-pwm";
+ reg = <0x32f0000 0x10000>;
+ clocks = <&bpmp TEGRA194_CLK_PWM8>;
+ clock-names = "pwm";
+ resets = <&bpmp TEGRA194_RESET_PWM8>;
+ reset-names = "pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ };
+
sdmmc1: sdhci@3400000 {
compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci";
reg = <0x03400000 0x10000>;
@@ -242,6 +328,22 @@
status = "disabled";
};
+ hda@3510000 {
+ compatible = "nvidia,tegra194-hda", "nvidia,tegra30-hda";
+ reg = <0x3510000 0x10000>;
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA194_CLK_HDA>,
+ <&bpmp TEGRA194_CLK_HDA2CODEC_2X>,
+ <&bpmp TEGRA194_CLK_HDA2HDMICODEC>;
+ clock-names = "hda", "hda2codec_2x", "hda2hdmi";
+ resets = <&bpmp TEGRA194_RESET_HDA>,
+ <&bpmp TEGRA194_RESET_HDA2CODEC_2X>,
+ <&bpmp TEGRA194_RESET_HDA2HDMICODEC>;
+ reset-names = "hda", "hda2codec_2x", "hda2hdmi";
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@3881000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -255,6 +357,15 @@
interrupt-parent = <&gic>;
};
+ cec@3960000 {
+ compatible = "nvidia,tegra194-cec";
+ reg = <0x03960000 0x10000>;
+ interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA194_CLK_CEC>;
+ clock-names = "cec";
+ status = "disabled";
+ };
+
hsp_top0: hsp@3c00000 {
compatible = "nvidia,tegra186-hsp";
reg = <0x03c00000 0xa0000>;
@@ -313,7 +424,44 @@
status = "disabled";
};
- pmc@c360000 {
+ rtc: rtc@c2a0000 {
+ compatible = "nvidia,tegra194-rtc", "nvidia,tegra20-rtc";
+ reg = <0x0c2a0000 0x10000>;
+ interrupt-parent = <&pmc>;
+ interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA194_CLK_CLK_32K>;
+ clock-names = "rtc";
+ status = "disabled";
+ };
+
+ gpio_aon: gpio@c2f0000 {
+ compatible = "nvidia,tegra194-gpio-aon";
+ reg-names = "security", "gpio";
+ reg = <0xc2f0000 0x1000>,
+ <0xc2f1000 0x1000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pwm4: pwm@c340000 {
+ compatible = "nvidia,tegra194-pwm",
+ "nvidia,tegra186-pwm";
+ reg = <0xc340000 0x10000>;
+ clocks = <&bpmp TEGRA194_CLK_PWM4>;
+ clock-names = "pwm";
+ resets = <&bpmp TEGRA194_RESET_PWM4>;
+ reset-names = "pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ };
+
+ pmc: pmc@c360000 {
compatible = "nvidia,tegra194-pmc";
reg = <0x0c360000 0x10000>,
<0x0c370000 0x10000>,
@@ -321,6 +469,356 @@
<0x0c390000 0x10000>,
<0x0c3a0000 0x10000>;
reg-names = "pmc", "wake", "aotag", "scratch", "misc";
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ host1x@13e00000 {
+ compatible = "nvidia,tegra194-host1x", "simple-bus";
+ reg = <0x13e00000 0x10000>,
+ <0x13e10000 0x10000>;
+ reg-names = "hypervisor", "vm";
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA194_CLK_HOST1X>;
+ clock-names = "host1x";
+ resets = <&bpmp TEGRA194_RESET_HOST1X>;
+ reset-names = "host1x";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x15000000 0x15000000 0x01000000>;
+
+ display-hub@15200000 {
+ compatible = "nvidia,tegra194-display", "simple-bus";
+ reg = <0x15200000 0x00040000>;
+ resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_MISC>,
+ <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP0>,
+ <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP1>,
+ <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP2>,
+ <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP3>,
+ <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP4>,
+ <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP5>;
+ reset-names = "misc", "wgrp0", "wgrp1", "wgrp2",
+ "wgrp3", "wgrp4", "wgrp5";
+ clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_DISP>,
+ <&bpmp TEGRA194_CLK_NVDISPLAYHUB>;
+ clock-names = "disp", "hub";
+ status = "disabled";
+
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x15200000 0x15200000 0x40000>;
+
+ display@15200000 {
+ compatible = "nvidia,tegra194-dc";
+ reg = <0x15200000 0x10000>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P0>;
+ clock-names = "dc";
+ resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD0>;
+ reset-names = "dc";
+
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+ nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+ nvidia,head = <0>;
+ };
+
+ display@15210000 {
+ compatible = "nvidia,tegra194-dc";
+ reg = <0x15210000 0x10000>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P1>;
+ clock-names = "dc";
+ resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD1>;
+ reset-names = "dc";
+
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPB>;
+
+ nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+ nvidia,head = <1>;
+ };
+
+ display@15220000 {
+ compatible = "nvidia,tegra194-dc";
+ reg = <0x15220000 0x10000>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P2>;
+ clock-names = "dc";
+ resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD2>;
+ reset-names = "dc";
+
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+
+ nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+ nvidia,head = <2>;
+ };
+
+ display@15230000 {
+ compatible = "nvidia,tegra194-dc";
+ reg = <0x15230000 0x10000>;
+ interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P3>;
+ clock-names = "dc";
+ resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD3>;
+ reset-names = "dc";
+
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+
+ nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+ nvidia,head = <3>;
+ };
+ };
+
+ vic@15340000 {
+ compatible = "nvidia,tegra194-vic";
+ reg = <0x15340000 0x00040000>;
+ interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA194_CLK_VIC>;
+ clock-names = "vic";
+ resets = <&bpmp TEGRA194_RESET_VIC>;
+ reset-names = "vic";
+
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_VIC>;
+ };
+
+ dpaux0: dpaux@155c0000 {
+ compatible = "nvidia,tegra194-dpaux";
+ reg = <0x155c0000 0x10000>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA194_CLK_DPAUX>,
+ <&bpmp TEGRA194_CLK_PLLDP>;
+ clock-names = "dpaux", "parent";
+ resets = <&bpmp TEGRA194_RESET_DPAUX>;
+ reset-names = "dpaux";
+ status = "disabled";
+
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+ state_dpaux0_aux: pinmux-aux {
+ groups = "dpaux-io";
+ function = "aux";
+ };
+
+ state_dpaux0_i2c: pinmux-i2c {
+ groups = "dpaux-io";
+ function = "i2c";
+ };
+
+ state_dpaux0_off: pinmux-off {
+ groups = "dpaux-io";
+ function = "off";
+ };
+
+ i2c-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ dpaux1: dpaux@155d0000 {
+ compatible = "nvidia,tegra194-dpaux";
+ reg = <0x155d0000 0x10000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA194_CLK_DPAUX1>,
+ <&bpmp TEGRA194_CLK_PLLDP>;
+ clock-names = "dpaux", "parent";
+ resets = <&bpmp TEGRA194_RESET_DPAUX1>;
+ reset-names = "dpaux";
+ status = "disabled";
+
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+ state_dpaux1_aux: pinmux-aux {
+ groups = "dpaux-io";
+ function = "aux";
+ };
+
+ state_dpaux1_i2c: pinmux-i2c {
+ groups = "dpaux-io";
+ function = "i2c";
+ };
+
+ state_dpaux1_off: pinmux-off {
+ groups = "dpaux-io";
+ function = "off";
+ };
+
+ i2c-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ dpaux2: dpaux@155e0000 {
+ compatible = "nvidia,tegra194-dpaux";
+ reg = <0x155e0000 0x10000>;
+ interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA194_CLK_DPAUX2>,
+ <&bpmp TEGRA194_CLK_PLLDP>;
+ clock-names = "dpaux", "parent";
+ resets = <&bpmp TEGRA194_RESET_DPAUX2>;
+ reset-names = "dpaux";
+ status = "disabled";
+
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+ state_dpaux2_aux: pinmux-aux {
+ groups = "dpaux-io";
+ function = "aux";
+ };
+
+ state_dpaux2_i2c: pinmux-i2c {
+ groups = "dpaux-io";
+ function = "i2c";
+ };
+
+ state_dpaux2_off: pinmux-off {
+ groups = "dpaux-io";
+ function = "off";
+ };
+
+ i2c-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ dpaux3: dpaux@155f0000 {
+ compatible = "nvidia,tegra194-dpaux";
+ reg = <0x155f0000 0x10000>;
+ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA194_CLK_DPAUX3>,
+ <&bpmp TEGRA194_CLK_PLLDP>;
+ clock-names = "dpaux", "parent";
+ resets = <&bpmp TEGRA194_RESET_DPAUX3>;
+ reset-names = "dpaux";
+ status = "disabled";
+
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+ state_dpaux3_aux: pinmux-aux {
+ groups = "dpaux-io";
+ function = "aux";
+ };
+
+ state_dpaux3_i2c: pinmux-i2c {
+ groups = "dpaux-io";
+ function = "i2c";
+ };
+
+ state_dpaux3_off: pinmux-off {
+ groups = "dpaux-io";
+ function = "off";
+ };
+
+ i2c-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ sor0: sor@15b00000 {
+ compatible = "nvidia,tegra194-sor";
+ reg = <0x15b00000 0x40000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA194_CLK_SOR0_REF>,
+ <&bpmp TEGRA194_CLK_SOR0_OUT>,
+ <&bpmp TEGRA194_CLK_PLLD>,
+ <&bpmp TEGRA194_CLK_PLLDP>,
+ <&bpmp TEGRA194_CLK_SOR_SAFE>,
+ <&bpmp TEGRA194_CLK_SOR0_PAD_CLKOUT>;
+ clock-names = "sor", "out", "parent", "dp", "safe",
+ "pad";
+ resets = <&bpmp TEGRA194_RESET_SOR0>;
+ reset-names = "sor";
+ pinctrl-0 = <&state_dpaux0_aux>;
+ pinctrl-1 = <&state_dpaux0_i2c>;
+ pinctrl-2 = <&state_dpaux0_off>;
+ pinctrl-names = "aux", "i2c", "off";
+ status = "disabled";
+
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+ nvidia,interface = <0>;
+ };
+
+ sor1: sor@15b40000 {
+ compatible = "nvidia,tegra194-sor";
+ reg = <0x155c0000 0x40000>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA194_CLK_SOR1_REF>,
+ <&bpmp TEGRA194_CLK_SOR1_OUT>,
+ <&bpmp TEGRA194_CLK_PLLD2>,
+ <&bpmp TEGRA194_CLK_PLLDP>,
+ <&bpmp TEGRA194_CLK_SOR_SAFE>,
+ <&bpmp TEGRA194_CLK_SOR1_PAD_CLKOUT>;
+ clock-names = "sor", "out", "parent", "dp", "safe",
+ "pad";
+ resets = <&bpmp TEGRA194_RESET_SOR1>;
+ reset-names = "sor";
+ pinctrl-0 = <&state_dpaux1_aux>;
+ pinctrl-1 = <&state_dpaux1_i2c>;
+ pinctrl-2 = <&state_dpaux1_off>;
+ pinctrl-names = "aux", "i2c", "off";
+ status = "disabled";
+
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+ nvidia,interface = <1>;
+ };
+
+ sor2: sor@15b80000 {
+ compatible = "nvidia,tegra194-sor";
+ reg = <0x15b80000 0x40000>;
+ interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA194_CLK_SOR2_REF>,
+ <&bpmp TEGRA194_CLK_SOR2_OUT>,
+ <&bpmp TEGRA194_CLK_PLLD3>,
+ <&bpmp TEGRA194_CLK_PLLDP>,
+ <&bpmp TEGRA194_CLK_SOR_SAFE>,
+ <&bpmp TEGRA194_CLK_SOR2_PAD_CLKOUT>;
+ clock-names = "sor", "out", "parent", "dp", "safe",
+ "pad";
+ resets = <&bpmp TEGRA194_RESET_SOR2>;
+ reset-names = "sor";
+ pinctrl-0 = <&state_dpaux2_aux>;
+ pinctrl-1 = <&state_dpaux2_i2c>;
+ pinctrl-2 = <&state_dpaux2_off>;
+ pinctrl-names = "aux", "i2c", "off";
+ status = "disabled";
+
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+ nvidia,interface = <2>;
+ };
+
+ sor3: sor@15bc0000 {
+ compatible = "nvidia,tegra194-sor";
+ reg = <0x15bc0000 0x40000>;
+ interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA194_CLK_SOR3_REF>,
+ <&bpmp TEGRA194_CLK_SOR3_OUT>,
+ <&bpmp TEGRA194_CLK_PLLD4>,
+ <&bpmp TEGRA194_CLK_PLLDP>,
+ <&bpmp TEGRA194_CLK_SOR_SAFE>,
+ <&bpmp TEGRA194_CLK_SOR3_PAD_CLKOUT>;
+ clock-names = "sor", "out", "parent", "dp", "safe",
+ "pad";
+ resets = <&bpmp TEGRA194_RESET_SOR3>;
+ reset-names = "sor";
+ pinctrl-0 = <&state_dpaux3_aux>;
+ pinctrl-1 = <&state_dpaux3_i2c>;
+ pinctrl-2 = <&state_dpaux3_off>;
+ pinctrl-names = "aux", "i2c", "off";
+ status = "disabled";
+
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+ nvidia,interface = <3>;
+ };
};
};
@@ -435,6 +933,44 @@
method = "smc";
};
+ thermal-zones {
+ cpu {
+ thermal-sensors = <&{/bpmp/thermal}
+ TEGRA194_BPMP_THERMAL_ZONE_CPU>;
+ status = "disabled";
+ };
+
+ gpu {
+ thermal-sensors = <&{/bpmp/thermal}
+ TEGRA194_BPMP_THERMAL_ZONE_GPU>;
+ status = "disabled";
+ };
+
+ aux {
+ thermal-sensors = <&{/bpmp/thermal}
+ TEGRA194_BPMP_THERMAL_ZONE_AUX>;
+ status = "disabled";
+ };
+
+ pllx {
+ thermal-sensors = <&{/bpmp/thermal}
+ TEGRA194_BPMP_THERMAL_ZONE_PLLX>;
+ status = "disabled";
+ };
+
+ ao {
+ thermal-sensors = <&{/bpmp/thermal}
+ TEGRA194_BPMP_THERMAL_ZONE_AO>;
+ status = "disabled";
+ };
+
+ tj {
+ thermal-sensors = <&{/bpmp/thermal}
+ TEGRA194_BPMP_THERMAL_ZONE_TJ_MAX>;
+ status = "disabled";
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index 365726d..a96e6ee 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1330,6 +1330,10 @@
phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
};
+ hda@70030000 {
+ status = "okay";
+ };
+
padctl@7009f000 {
status = "okay";
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 8fe47d6..2205d66 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -879,6 +879,8 @@
resets = <&tegra_car 89>, <&tegra_car 156>,
<&tegra_car 143>;
reset-names = "xusb_host", "xusb_ss", "xusb_src";
+ power-domains = <&pd_xusbhost>, <&pd_xusbss>;
+ power-domain-names = "xusb_host", "xusb_ss";
nvidia,xusb-padctl = <&padctl>;
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index a658c07..21d548f 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -8,3 +8,5 @@
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index bf20c55a..6d50449 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -385,8 +385,9 @@
status = "okay";
};
- usb@6a00000 {
+ usb@6af8800 {
status = "okay";
+ extcon = <&usb3_id>;
dwc3@6a00000 {
extcon = <&usb3_id>;
@@ -401,8 +402,9 @@
pinctrl-0 = <&usb3_vbus_det_gpio>;
};
- usb@7600000 {
+ usb@76f8800 {
status = "okay";
+ extcon = <&usb2_id>;
dwc3@7600000 {
extcon = <&usb2_id>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index 390a2fa..aa9a0ff 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -689,4 +689,80 @@
bias-pull-up;
};
};
+
+ cci0_default: cci0_default {
+ pinmux {
+ function = "cci_i2c";
+ pins = "gpio29", "gpio30";
+ };
+ pinconf {
+ pins = "gpio29", "gpio30";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ camera_front_default: camera_front_default {
+ pinmux_pwdn {
+ function = "gpio";
+ pins = "gpio33";
+ };
+ pinconf_pwdn {
+ pins = "gpio33";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ pinmux_rst {
+ function = "gpio";
+ pins = "gpio28";
+ };
+ pinconf_rst {
+ pins = "gpio28";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ pinmux_mclk1 {
+ function = "cam_mclk1";
+ pins = "gpio27";
+ };
+ pinconf_mclk1 {
+ pins = "gpio27";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ camera_rear_default: camera_rear_default {
+ pinmux_pwdn {
+ function = "gpio";
+ pins = "gpio34";
+ };
+ pinconf_pwdn {
+ pins = "gpio34";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ pinmux_rst {
+ function = "gpio";
+ pins = "gpio35";
+ };
+ pinconf_rst {
+ pins = "gpio35";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ pinmux_mclk0 {
+ function = "cam_mclk0";
+ pins = "gpio26";
+ };
+ pinconf_mclk0 {
+ pins = "gpio26";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index d302d8d..c5348c3 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -202,7 +202,10 @@
cooling-maps {
map0 {
trip = <&cpu_alert0>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
@@ -229,11 +232,55 @@
cooling-maps {
map0 {
trip = <&cpu_alert1>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
+ gpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 2>;
+
+ trips {
+ gpu_alert: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ gpu_crit: trip1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ camera-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 1>;
+
+ trips {
+ cam_alert: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cam_crit: trip1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ };
+
};
cpu_opp_table: cpu_opp_table {
@@ -758,11 +805,13 @@
};
};
- tsens: thermal-sensor@4a8000 {
+ tsens: thermal-sensor@4a9000 {
compatible = "qcom,msm8916-tsens";
- reg = <0x4a8000 0x2000>;
+ reg = <0x4a9000 0x1000>, /* TM */
+ <0x4a8000 0x1000>; /* SROT */
nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
nvmem-cell-names = "calib", "calib_sel";
+ #qcom,sensors = <5>;
#thermal-sensor-cells = <1>;
};
@@ -778,6 +827,13 @@
clock-names = "iface", "bus";
qcom,iommu-secure-id = <17>;
+ // vfe:
+ iommu-ctx@3000 {
+ compatible = "qcom,msm-iommu-v1-sec";
+ reg = <0x3000 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
// mdp_0:
iommu-ctx@4000 {
compatible = "qcom,msm-iommu-v1-ns";
@@ -1389,6 +1445,86 @@
compatible = "venus-encoder";
};
};
+
+ camss: camss@1b00000 {
+ compatible = "qcom,msm8916-camss";
+ reg = <0x1b0ac00 0x200>,
+ <0x1b00030 0x4>,
+ <0x1b0b000 0x200>,
+ <0x1b00038 0x4>,
+ <0x1b08000 0x100>,
+ <0x1b08400 0x100>,
+ <0x1b0a000 0x500>,
+ <0x1b00020 0x10>,
+ <0x1b10000 0x1000>;
+ reg-names = "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csid0",
+ "csid1",
+ "ispif",
+ "csi_clk_mux",
+ "vfe0";
+ interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csid0",
+ "csid1",
+ "ispif",
+ "vfe0";
+ power-domains = <&gcc VFE_GDSC>;
+ clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+ <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI0_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI0PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI0RDI_CLK>,
+ <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI1_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI1PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI1RDI_CLK>,
+ <&gcc GCC_CAMSS_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE0_CLK>,
+ <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
+ <&gcc GCC_CAMSS_VFE_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE_AXI_CLK>;
+ clock-names = "top_ahb",
+ "ispif_ahb",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "ahb",
+ "vfe0",
+ "csi_vfe0",
+ "vfe_ahb",
+ "vfe_axi";
+ vdda-supply = <&pm8916_l2>;
+ iommus = <&apps_iommu 3>;
+ status = "disabled";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
};
smd {
diff --git a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
index c5c42e9..8d5114d 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
@@ -495,4 +495,124 @@
bias-disable;
};
};
+
+ cci0_default: cci0_default {
+ pinmux {
+ function = "cci_i2c";
+ pins = "gpio17", "gpio18";
+ };
+ pinconf {
+ pins = "gpio17", "gpio18";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ cci1_default: cci1_default {
+ pinmux {
+ function = "cci_i2c";
+ pins = "gpio19", "gpio20";
+ };
+ pinconf {
+ pins = "gpio19", "gpio20";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ camera_board_default: camera_board_default {
+ mux_pwdn {
+ function = "gpio";
+ pins = "gpio98";
+ };
+ config_pwdn {
+ pins = "gpio98";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ mux_rst {
+ function = "gpio";
+ pins = "gpio104";
+ };
+ config_rst {
+ pins = "gpio104";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ mux_mclk1 {
+ function = "cam_mclk";
+ pins = "gpio14";
+ };
+ config_mclk1 {
+ pins = "gpio14";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ camera_front_default: camera_front_default {
+ mux_pwdn {
+ function = "gpio";
+ pins = "gpio133";
+ };
+ config_pwdn {
+ pins = "gpio133";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ mux_rst {
+ function = "gpio";
+ pins = "gpio23";
+ };
+ config_rst {
+ pins = "gpio23";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ mux_mclk2 {
+ function = "cam_mclk";
+ pins = "gpio15";
+ };
+ config_mclk2 {
+ pins = "gpio15";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ camera_rear_default: camera_rear_default {
+ mux_pwdn {
+ function = "gpio";
+ pins = "gpio26";
+ };
+ config_pwdn {
+ pins = "gpio26";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ mux_rst {
+ function = "gpio";
+ pins = "gpio25";
+ };
+ config_rst {
+ pins = "gpio25";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ mux_mclk0 {
+ function = "cam_mclk";
+ pins = "gpio13";
+ };
+ config_mclk0 {
+ pins = "gpio13";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index b29fe80..99b7495 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -370,6 +370,13 @@
reg = <0x68000 0x6000>;
};
+ rng: rng@83000 {
+ compatible = "qcom,prng-ee";
+ reg = <0x00083000 0x1000>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ };
+
tcsr_mutex_regs: syscon@740000 {
compatible = "syscon";
reg = <0x740000 0x20000>;
@@ -886,8 +893,9 @@
status = "disabled";
};
- usb2: usb@7600000 {
- compatible = "qcom,dwc3";
+ usb2: usb@76f8800 {
+ compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+ reg = <0x76f8800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -914,8 +922,9 @@
};
};
- usb3: usb@6a00000 {
- compatible = "qcom,dwc3";
+ usb3: usb@6af8800 {
+ compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+ reg = <0x6af8800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -943,6 +952,158 @@
};
};
+ vfe_smmu: arm,smmu@da0000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0xda0000 0x10000>;
+
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&mmcc MMAGIC_CAMSS_GDSC>;
+ clocks = <&mmcc SMMU_VFE_AHB_CLK>,
+ <&mmcc SMMU_VFE_AXI_CLK>;
+ clock-names = "iface",
+ "bus";
+ #iommu-cells = <1>;
+ status = "ok";
+ };
+
+ camss: camss@a00000 {
+ compatible = "qcom,msm8996-camss";
+ reg = <0xa34000 0x1000>,
+ <0xa00030 0x4>,
+ <0xa35000 0x1000>,
+ <0xa00038 0x4>,
+ <0xa36000 0x1000>,
+ <0xa00040 0x4>,
+ <0xa30000 0x100>,
+ <0xa30400 0x100>,
+ <0xa30800 0x100>,
+ <0xa30c00 0x100>,
+ <0xa31000 0x500>,
+ <0xa00020 0x10>,
+ <0xa10000 0x1000>,
+ <0xa14000 0x1000>;
+ reg-names = "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csiphy2",
+ "csiphy2_clk_mux",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "ispif",
+ "csi_clk_mux",
+ "vfe0",
+ "vfe1";
+ interrupts = <GIC_SPI 78 0>,
+ <GIC_SPI 79 0>,
+ <GIC_SPI 80 0>,
+ <GIC_SPI 296 0>,
+ <GIC_SPI 297 0>,
+ <GIC_SPI 298 0>,
+ <GIC_SPI 299 0>,
+ <GIC_SPI 309 0>,
+ <GIC_SPI 314 0>,
+ <GIC_SPI 315 0>;
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "ispif",
+ "vfe0",
+ "vfe1";
+ power-domains = <&mmcc VFE0_GDSC>;
+ clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+ <&mmcc CAMSS_ISPIF_AHB_CLK>,
+ <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI0_AHB_CLK>,
+ <&mmcc CAMSS_CSI0_CLK>,
+ <&mmcc CAMSS_CSI0PHY_CLK>,
+ <&mmcc CAMSS_CSI0PIX_CLK>,
+ <&mmcc CAMSS_CSI0RDI_CLK>,
+ <&mmcc CAMSS_CSI1_AHB_CLK>,
+ <&mmcc CAMSS_CSI1_CLK>,
+ <&mmcc CAMSS_CSI1PHY_CLK>,
+ <&mmcc CAMSS_CSI1PIX_CLK>,
+ <&mmcc CAMSS_CSI1RDI_CLK>,
+ <&mmcc CAMSS_CSI2_AHB_CLK>,
+ <&mmcc CAMSS_CSI2_CLK>,
+ <&mmcc CAMSS_CSI2PHY_CLK>,
+ <&mmcc CAMSS_CSI2PIX_CLK>,
+ <&mmcc CAMSS_CSI2RDI_CLK>,
+ <&mmcc CAMSS_CSI3_AHB_CLK>,
+ <&mmcc CAMSS_CSI3_CLK>,
+ <&mmcc CAMSS_CSI3PHY_CLK>,
+ <&mmcc CAMSS_CSI3PIX_CLK>,
+ <&mmcc CAMSS_CSI3RDI_CLK>,
+ <&mmcc CAMSS_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_CLK>,
+ <&mmcc CAMSS_CSI_VFE0_CLK>,
+ <&mmcc CAMSS_VFE0_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_STREAM_CLK>,
+ <&mmcc CAMSS_VFE1_CLK>,
+ <&mmcc CAMSS_CSI_VFE1_CLK>,
+ <&mmcc CAMSS_VFE1_AHB_CLK>,
+ <&mmcc CAMSS_VFE1_STREAM_CLK>,
+ <&mmcc CAMSS_VFE_AHB_CLK>,
+ <&mmcc CAMSS_VFE_AXI_CLK>;
+ clock-names = "top_ahb",
+ "ispif_ahb",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csiphy2_timer",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "csi2_ahb",
+ "csi2",
+ "csi2_phy",
+ "csi2_pix",
+ "csi2_rdi",
+ "csi3_ahb",
+ "csi3",
+ "csi3_phy",
+ "csi3_pix",
+ "csi3_rdi",
+ "ahb",
+ "vfe0",
+ "csi_vfe0",
+ "vfe0_ahb",
+ "vfe0_stream",
+ "vfe1",
+ "csi_vfe1",
+ "vfe1_ahb",
+ "vfe1_stream",
+ "vfe_ahb",
+ "vfe_axi";
+ vdda-supply = <&pm8994_l2>;
+ iommus = <&vfe_smmu 0>,
+ <&vfe_smmu 1>,
+ <&vfe_smmu 2>,
+ <&vfe_smmu 3>;
+ status = "disabled";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
agnoc@0 {
power-domains = <&gcc AGGRE0_NOC_GDSC>;
compatible = "simple-pm-bus";
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index b4276da..50e9033 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -241,3 +241,19 @@
};
};
};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>, <81 4>;
+};
+
+&sdhc2 {
+ status = "okay";
+ cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;
+
+ vmmc-supply = <&vreg_l21a_2p95>;
+ vqmmc-supply = <&vreg_l13a_2p95>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi
new file mode 100644
index 0000000..6db70ac
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */
+
+&tlmm {
+ sdc2_clk_on: sdc2_clk_on {
+ config {
+ pins = "sdc2_clk";
+ bias-disable; /* NO pull */
+ drive-strength = <16>; /* 16 mA */
+ };
+ };
+
+ sdc2_clk_off: sdc2_clk_off {
+ config {
+ pins = "sdc2_clk";
+ bias-disable; /* NO pull */
+ drive-strength = <2>; /* 2 mA */
+ };
+ };
+
+ sdc2_cmd_on: sdc2_cmd_on {
+ config {
+ pins = "sdc2_cmd";
+ bias-pull-up; /* pull up */
+ drive-strength = <10>; /* 10 mA */
+ };
+ };
+
+ sdc2_cmd_off: sdc2_cmd_off {
+ config {
+ pins = "sdc2_cmd";
+ bias-pull-up; /* pull up */
+ drive-strength = <2>; /* 2 mA */
+ };
+ };
+
+ sdc2_data_on: sdc2_data_on {
+ config {
+ pins = "sdc2_data";
+ bias-pull-up; /* pull up */
+ drive-strength = <10>; /* 10 mA */
+ };
+ };
+
+ sdc2_data_off: sdc2_data_off {
+ config {
+ pins = "sdc2_data";
+ bias-pull-up; /* pull up */
+ drive-strength = <2>; /* 2 mA */
+ };
+ };
+
+ sdc2_cd_on: sdc2_cd_on {
+ mux {
+ pins = "gpio95";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio95";
+ bias-pull-up; /* pull up */
+ drive-strength = <2>; /* 2 mA */
+ };
+ };
+
+ sdc2_cd_off: sdc2_cd_off {
+ mux {
+ pins = "gpio95";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio95";
+ bias-pull-up; /* pull up */
+ drive-strength = <2>; /* 2 mA */
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 78227cc..8d41b69 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -3,6 +3,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8998.h>
+#include <dt-bindings/gpio/gpio.h>
/ {
interrupt-parent = <&intc>;
@@ -53,10 +54,11 @@
};
clocks {
- xo_board {
+ xo: xo-board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
+ clock-output-names = "xo_board";
};
sleep_clk {
@@ -239,7 +241,7 @@
firmware {
scm {
- compatible = "qcom,scm-msm8998";
+ compatible = "qcom,scm-msm8998", "qcom,scm";
};
};
@@ -605,6 +607,23 @@
#mbox-cells = <1>;
};
+ sdhc2: sdhci@c0a4900 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0xc0a4900 0x314>, <0xc0a4000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clock-names = "iface", "core", "xo";
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&xo>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
blsp2_uart1: serial@c1b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xc1b0000 0x1000>;
@@ -688,3 +707,5 @@
};
};
};
+
+#include "msm8998-pins.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
index 048f19f..f1025a5 100644
--- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
@@ -75,6 +75,11 @@
#address-cells = <1>;
#size-cells = <0>;
#io-channel-cells = <1>;
+
+ adc-chan@ADC5_DIE_TEMP {
+ reg = <ADC5_DIE_TEMP>;
+ label = "die_temp";
+ };
};
rtc@6000 {
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
new file mode 100644
index 0000000..ad2b62d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, Linaro Limited
+
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+&spmi_bus {
+ pms405_0: pms405@0 {
+ compatible = "qcom,spmi-pmic";
+ reg = <0x0 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pms405_gpios: gpio@c000 {
+ compatible = "qcom,pms405-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>,
+ <0 0xc4 0 IRQ_TYPE_NONE>,
+ <0 0xc5 0 IRQ_TYPE_NONE>,
+ <0 0xc6 0 IRQ_TYPE_NONE>,
+ <0 0xc7 0 IRQ_TYPE_NONE>,
+ <0 0xc8 0 IRQ_TYPE_NONE>,
+ <0 0xc9 0 IRQ_TYPE_NONE>,
+ <0 0xca 0 IRQ_TYPE_NONE>,
+ <0 0xcb 0 IRQ_TYPE_NONE>;
+ };
+
+ pon@800 {
+ compatible = "qcom,pms405-pon";
+ reg = <0x0800>;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
+ };
+
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts
new file mode 100644
index 0000000..2c14903
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, Linaro Limited
+
+/dts-v1/;
+
+#include "qcs404-evb.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. QCS404 EVB 1000";
+ compatible = "qcom,qcs404-evb";
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
new file mode 100644
index 0000000..11269ad
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, Linaro Limited
+
+/dts-v1/;
+
+#include "qcs404-evb.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. QCS404 EVB 4000";
+ compatible = "qcom,qcs404-evb";
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
new file mode 100644
index 0000000..a39924e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, Linaro Limited
+
+#include "qcs404.dtsi"
+#include "pms405.dtsi"
+
+/ {
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&remoteproc_adsp {
+ status = "ok";
+};
+
+&remoteproc_cdsp {
+ status = "ok";
+};
+
+&remoteproc_wcss {
+ status = "ok";
+};
+
+&rpm_requests {
+ pms405-regulators {
+ compatible = "qcom,rpm-pms405-regulators";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-l1-l2-supply = <&vreg_s5_1p35>;
+ vdd-l3-l8-supply = <&vreg_s5_1p35>;
+ vdd-l4-supply = <&vreg_s5_1p35>;
+ vdd-l5-l6-supply = <&vreg_s4_1p8>;
+ vdd-l7-supply = <&vph_pwr>;
+ vdd-l9-supply = <&vreg_s5_1p35>;
+ vdd-l10-l11-l12-l13-supply = <&vph_pwr>;
+
+ vreg_s4_1p8: s4 {
+ regulator-min-microvolt = <1728000>;
+ regulator-max-microvolt = <1920000>;
+ };
+
+ vreg_s5_1p35: s5 {
+ regulator-min-microvolt = <>;
+ regulator-max-microvolt = <>;
+ };
+
+ vreg_l1_1p3: l1 {
+ regulator-min-microvolt = <1240000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_l2_1p275: l2 {
+ regulator-min-microvolt = <1048000>;
+ regulator-max-microvolt = <1280000>;
+ };
+
+ vreg_l3_1p05: l3 {
+ regulator-min-microvolt = <976000>;
+ regulator-max-microvolt = <1160000>;
+ };
+
+ vreg_l4_1p2: l4 {
+ regulator-min-microvolt = <1144000>;
+ regulator-max-microvolt = <1256000>;
+ };
+
+ vreg_l5_1p8: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_l6_1p8: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vreg_l7_1p8: l7 {
+ regulator-min-microvolt = <1616000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vreg_l8_1p2: l8 {
+ regulator-min-microvolt = <1136000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_l10_3p3: l10 {
+ regulator-min-microvolt = <2936000>;
+ regulator-max-microvolt = <3088000>;
+ };
+
+ vreg_l11_sdc2: l11 {
+ regulator-min-microvolt = <2696000>;
+ regulator-max-microvolt = <3304000>;
+ };
+
+ vreg_l12_3p3: l12 {
+ regulator-min-microvolt = <2968000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vreg_l13_3p3: l13 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+};
+
+&sdcc1 {
+ status = "ok";
+
+ mmc-ddr-1_8v;
+ bus-width = <8>;
+ non-removable;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_on>;
+ pinctrl-1 = <&sdc1_off>;
+};
+
+&tlmm {
+ sdc1_on: sdc1-on {
+ clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ dreive-strength = <10>;
+ };
+
+ rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc1_off: sdc1-off {
+ clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ dreive-strength = <2>;
+ };
+
+ rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
new file mode 100644
index 0000000..9b5c165
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -0,0 +1,490 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, Linaro Limited
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-qcs404.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CPU0: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x100>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU1: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x101>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU2: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x102>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU3: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x103>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-qcs404", "qcom,scm";
+ #reset-cells = <1>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0 0x80000000 0 0>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ remoteproc_adsp: remoteproc-adsp {
+ compatible = "qcom,qcs404-adsp-pas";
+
+ interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ memory-region = <&adsp_fw_mem>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,remote-pid = <2>;
+ mboxes = <&apcs_glb 8>;
+
+ label = "adsp";
+ };
+ };
+
+ remoteproc_cdsp: remoteproc-cdsp {
+ compatible = "qcom,qcs404-cdsp-pas";
+
+ interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ memory-region = <&cdsp_fw_mem>;
+
+ qcom,smem-states = <&cdsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,remote-pid = <5>;
+ mboxes = <&apcs_glb 12>;
+
+ label = "cdsp";
+ };
+ };
+
+ remoteproc_wcss: remoteproc-wcss {
+ compatible = "qcom,qcs404-wcss-pas";
+
+ interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ memory-region = <&wlan_fw_mem>;
+
+ qcom,smem-states = <&wcss_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,remote-pid = <1>;
+ mboxes = <&apcs_glb 16>;
+
+ label = "wcss";
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ memory@85600000 {
+ reg = <0 0x85600000 0 0x90000>;
+ no-map;
+ };
+
+ smem_region: memory@85f00000 {
+ reg = <0 0x85f00000 0 0x200000>;
+ no-map;
+ };
+
+ memory@86100000 {
+ reg = <0 0x86100000 0 0x300000>;
+ no-map;
+ };
+
+ wlan_fw_mem: memory@86400000 {
+ reg = <0 0x86400000 0 0x1c00000>;
+ no-map;
+ };
+
+ adsp_fw_mem: memory@88000000 {
+ reg = <0 0x88000000 0 0x1a00000>;
+ no-map;
+ };
+
+ cdsp_fw_mem: memory@89a00000 {
+ reg = <0 0x89a00000 0 0x600000>;
+ no-map;
+ };
+
+ wlan_msa_mem: memory@8a000000 {
+ reg = <0 0x8a000000 0 0x100000>;
+ no-map;
+ };
+ };
+
+ rpm-glink {
+ compatible = "qcom,glink-rpm";
+
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: glink-channel {
+ compatible = "qcom,rpm-qcs404";
+ qcom,glink-channels = "rpm_requests";
+ };
+ };
+
+ smem {
+ compatible = "qcom,smem";
+
+ memory-region = <&smem_region>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ tcsr_mutex: hwlock {
+ compatible = "qcom,tcsr-mutex";
+ syscon = <&tcsr_mutex_regs 0 0x1000>;
+ #hwlock-cells = <1>;
+ };
+
+ soc: soc@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+ compatible = "simple-bus";
+
+ rpm_msg_ram: memory@60000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0x00060000 0x6000>;
+ };
+
+ rng: rng@e3000 {
+ compatible = "qcom,prng-ee";
+ reg = <0x000e3000 0x1000>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ };
+
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,qcs404-pinctrl";
+ reg = <0x01000000 0x200000>,
+ <0x01300000 0x200000>,
+ <0x07b00000 0x200000>;
+ reg-names = "south", "north", "east";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&tlmm 0 0 120>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gcc: clock-controller@1800000 {
+ compatible = "qcom,gcc-qcs404";
+ reg = <0x01800000 0x80000>;
+ #clock-cells = <1>;
+
+ assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>;
+ assigned-clock-rates = <19200000>;
+ };
+
+ tcsr_mutex_regs: syscon@1905000 {
+ compatible = "syscon";
+ reg = <0x01905000 0x20000>;
+ };
+
+ spmi_bus: spmi@200f000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x0200f000 0x001000>,
+ <0x02400000 0x800000>,
+ <0x02c00000 0x800000>,
+ <0x03800000 0x200000>,
+ <0x0200a000 0x002100>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
+ sdcc1: sdcc@7804000 {
+ compatible = "qcom,sdhci-msm-v5";
+ reg = <0x07804000 0x1000>, <0x7805000 0x1000>;
+ reg-names = "hc_mem", "cmdq_mem";
+
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+ <&gcc GCC_SDCC1_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "core", "iface", "xo";
+
+ status = "disabled";
+ };
+
+ blsp1_dma: dma@7884000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x07884000 0x25000>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,controlled-remotely = <1>;
+ qcom,ee = <0>;
+ status = "okay";
+ };
+
+ blsp1_uart2: serial@78b1000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x078b1000 0x200>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp1_dma 5>, <&blsp1_dma 4>;
+ dma-names = "rx", "tx";
+ status = "okay";
+ };
+
+ intc: interrupt-controller@b000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x0b000000 0x1000>,
+ <0x0b002000 0x1000>;
+ };
+
+ apcs_glb: mailbox@b011000 {
+ compatible = "qcom,qcs404-apcs-apps-global", "syscon";
+ reg = <0x0b011000 0x1000>;
+ #mbox-cells = <1>;
+ };
+
+ timer@b120000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0b120000 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@b121000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b121000 0x1000>,
+ <0x0b122000 0x1000>;
+ };
+
+ frame@b123000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b123000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b124000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b124000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b125000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b125000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b126000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b126000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b127000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb127000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b128000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b128000 0x1000>;
+ status = "disabled";
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 2 0xff08>,
+ <GIC_PPI 3 0xff08>,
+ <GIC_PPI 4 0xff08>,
+ <GIC_PPI 1 0xff08>;
+ };
+
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+ interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs_glb 10>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ adsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ adsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-cdsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <94>, <432>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs_glb 14>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ cdsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ cdsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-wcss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs_glb 18>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ wcss_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ wcss_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index eedfaf8..d667eee 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -352,6 +352,10 @@
status = "okay";
};
+&tlmm {
+ gpio-reserved-ranges = <0 4>, <81 4>;
+};
+
&uart9 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index b72bdb0..c27cbd3 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/phy/phy-qcom-qusb2.h>
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/clock/qcom,gcc-sdm845.h>
/ {
interrupt-parent = <&intc>;
@@ -357,6 +358,13 @@
};
};
+ rng: rng@793000 {
+ compatible = "qcom,prng-ee";
+ reg = <0x00793000 0x1000>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ };
+
qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x8c0000 0x6000>;
@@ -394,6 +402,17 @@
status = "disabled";
};
+ uart0: serial@880000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x880000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart0_default>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
i2c1: i2c@884000 {
compatible = "qcom,geni-i2c";
reg = <0x884000 0x4000>;
@@ -420,6 +439,17 @@
status = "disabled";
};
+ uart1: serial@884000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x884000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart1_default>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
i2c2: i2c@888000 {
compatible = "qcom,geni-i2c";
reg = <0x888000 0x4000>;
@@ -446,6 +476,17 @@
status = "disabled";
};
+ uart2: serial@888000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x888000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart2_default>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
i2c3: i2c@88c000 {
compatible = "qcom,geni-i2c";
reg = <0x88c000 0x4000>;
@@ -472,6 +513,17 @@
status = "disabled";
};
+ uart3: serial@88c000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x88c000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart3_default>;
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
i2c4: i2c@890000 {
compatible = "qcom,geni-i2c";
reg = <0x890000 0x4000>;
@@ -498,6 +550,17 @@
status = "disabled";
};
+ uart4: serial@890000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x890000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart4_default>;
+ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
i2c5: i2c@894000 {
compatible = "qcom,geni-i2c";
reg = <0x894000 0x4000>;
@@ -524,6 +587,17 @@
status = "disabled";
};
+ uart5: serial@894000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x894000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart5_default>;
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
i2c6: i2c@898000 {
compatible = "qcom,geni-i2c";
reg = <0x898000 0x4000>;
@@ -550,6 +624,17 @@
status = "disabled";
};
+ uart6: serial@898000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x898000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart6_default>;
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
i2c7: i2c@89c000 {
compatible = "qcom,geni-i2c";
reg = <0x89c000 0x4000>;
@@ -575,6 +660,17 @@
#size-cells = <0>;
status = "disabled";
};
+
+ uart7: serial@89c000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x89c000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart7_default>;
+ interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
};
qupv3_id_1: geniqup@ac0000 {
@@ -614,6 +710,17 @@
status = "disabled";
};
+ uart8: serial@a80000 {
+ compatible = "qcom,geni-uart";
+ reg = <0xa80000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart8_default>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
i2c9: i2c@a84000 {
compatible = "qcom,geni-i2c";
reg = <0xa84000 0x4000>;
@@ -677,6 +784,17 @@
status = "disabled";
};
+ uart10: serial@a88000 {
+ compatible = "qcom,geni-uart";
+ reg = <0xa88000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart10_default>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
i2c11: i2c@a8c000 {
compatible = "qcom,geni-i2c";
reg = <0xa8c000 0x4000>;
@@ -703,6 +821,17 @@
status = "disabled";
};
+ uart11: serial@a8c000 {
+ compatible = "qcom,geni-uart";
+ reg = <0xa8c000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart11_default>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
i2c12: i2c@a90000 {
compatible = "qcom,geni-i2c";
reg = <0xa90000 0x4000>;
@@ -729,6 +858,17 @@
status = "disabled";
};
+ uart12: serial@a90000 {
+ compatible = "qcom,geni-uart";
+ reg = <0xa90000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart12_default>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
i2c13: i2c@a94000 {
compatible = "qcom,geni-i2c";
reg = <0xa94000 0x4000>;
@@ -755,6 +895,17 @@
status = "disabled";
};
+ uart13: serial@a94000 {
+ compatible = "qcom,geni-uart";
+ reg = <0xa94000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart13_default>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
i2c14: i2c@a98000 {
compatible = "qcom,geni-i2c";
reg = <0xa98000 0x4000>;
@@ -781,6 +932,17 @@
status = "disabled";
};
+ uart14: serial@a98000 {
+ compatible = "qcom,geni-uart";
+ reg = <0xa98000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart14_default>;
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
i2c15: i2c@a9c000 {
compatible = "qcom,geni-i2c";
reg = <0xa9c000 0x4000>;
@@ -806,6 +968,17 @@
#size-cells = <0>;
status = "disabled";
};
+
+ uart15: serial@a9c000 {
+ compatible = "qcom,geni-uart";
+ reg = <0xa9c000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart15_default>;
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
};
tcsr_mutex_regs: syscon@1f40000 {
@@ -1062,12 +1235,117 @@
};
};
+ qup_uart0_default: qup-uart0-default {
+ pinmux {
+ pins = "gpio2", "gpio3";
+ function = "qup0";
+ };
+ };
+
+ qup_uart1_default: qup-uart1-default {
+ pinmux {
+ pins = "gpio19", "gpio20";
+ function = "qup1";
+ };
+ };
+
+ qup_uart2_default: qup-uart2-default {
+ pinmux {
+ pins = "gpio29", "gpio30";
+ function = "qup2";
+ };
+ };
+
+ qup_uart3_default: qup-uart3-default {
+ pinmux {
+ pins = "gpio43", "gpio44";
+ function = "qup3";
+ };
+ };
+
+ qup_uart4_default: qup-uart4-default {
+ pinmux {
+ pins = "gpio91", "gpio92";
+ function = "qup4";
+ };
+ };
+
+ qup_uart5_default: qup-uart5-default {
+ pinmux {
+ pins = "gpio87", "gpio88";
+ function = "qup5";
+ };
+ };
+
+ qup_uart6_default: qup-uart6-default {
+ pinmux {
+ pins = "gpio47", "gpio48";
+ function = "qup6";
+ };
+ };
+
+ qup_uart7_default: qup-uart7-default {
+ pinmux {
+ pins = "gpio95", "gpio96";
+ function = "qup7";
+ };
+ };
+
+ qup_uart8_default: qup-uart8-default {
+ pinmux {
+ pins = "gpio67", "gpio68";
+ function = "qup8";
+ };
+ };
+
qup_uart9_default: qup-uart9-default {
pinmux {
pins = "gpio4", "gpio5";
function = "qup9";
};
};
+
+ qup_uart10_default: qup-uart10-default {
+ pinmux {
+ pins = "gpio53", "gpio54";
+ function = "qup10";
+ };
+ };
+
+ qup_uart11_default: qup-uart11-default {
+ pinmux {
+ pins = "gpio33", "gpio34";
+ function = "qup11";
+ };
+ };
+
+ qup_uart12_default: qup-uart12-default {
+ pinmux {
+ pins = "gpio51", "gpio52";
+ function = "qup12";
+ };
+ };
+
+ qup_uart13_default: qup-uart13-default {
+ pinmux {
+ pins = "gpio107", "gpio108";
+ function = "qup13";
+ };
+ };
+
+ qup_uart14_default: qup-uart14-default {
+ pinmux {
+ pins = "gpio31", "gpio32";
+ function = "qup14";
+ };
+ };
+
+ qup_uart15_default: qup-uart15-default {
+ pinmux {
+ pins = "gpio83", "gpio84";
+ function = "qup15";
+ };
+ };
};
usb_1_hsphy: phy@88e2000 {
@@ -1404,4 +1682,174 @@
};
};
};
+
+ thermal-zones {
+ cpu0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit0: trip1 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ cpu_alert1: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit1: trip1 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 3>;
+
+ trips {
+ cpu_alert2: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit2: trip1 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu3-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 4>;
+
+ trips {
+ cpu_alert3: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit3: trip1 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu4-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cpu_alert4: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit4: trip1 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu5-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ cpu_alert5: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit5: trip1 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu6-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ cpu_alert6: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit6: trip1 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu7-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ cpu_alert7: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit7: trip1 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 012cbb6..20745a8 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -7,7 +7,8 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/renesas-cpg-mssr.h>
+#include <dt-bindings/clock/r8a774a1-cpg-mssr.h>
+#include <dt-bindings/power/r8a774a1-sysc.h>
/ {
compatible = "renesas,r8a774a1";
@@ -63,72 +64,72 @@
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x0>;
device_type = "cpu";
- power-domains = <&sysc 0>;
+ power-domains = <&sysc R8A774A1_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
- clocks = <&cpg CPG_CORE 0>;
+ clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>;
};
a57_1: cpu@1 {
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x1>;
device_type = "cpu";
- power-domains = <&sysc 1>;
+ power-domains = <&sysc R8A774A1_PD_CA57_CPU1>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
- clocks = <&cpg CPG_CORE 0>;
+ clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>;
};
a53_0: cpu@100 {
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x100>;
device_type = "cpu";
- power-domains = <&sysc 5>;
+ power-domains = <&sysc R8A774A1_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE 1>;
+ clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
};
a53_1: cpu@101 {
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x101>;
device_type = "cpu";
- power-domains = <&sysc 6>;
+ power-domains = <&sysc R8A774A1_PD_CA53_CPU1>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE 1>;
+ clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
};
a53_2: cpu@102 {
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x102>;
device_type = "cpu";
- power-domains = <&sysc 7>;
+ power-domains = <&sysc R8A774A1_PD_CA53_CPU2>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE 1>;
+ clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
};
a53_3: cpu@103 {
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x103>;
device_type = "cpu";
- power-domains = <&sysc 8>;
+ power-domains = <&sysc R8A774A1_PD_CA53_CPU3>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE 1>;
+ clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
};
L2_CA57: cache-controller-0 {
compatible = "cache";
- power-domains = <&sysc 12>;
+ power-domains = <&sysc R8A774A1_PD_CA57_SCU>;
cache-unified;
cache-level = <2>;
};
L2_CA53: cache-controller-1 {
compatible = "cache";
- power-domains = <&sysc 21>;
+ power-domains = <&sysc R8A774A1_PD_CA53_SCU>;
cache-unified;
cache-level = <2>;
};
@@ -195,7 +196,7 @@
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
clocks = <&cpg CPG_MOD 402>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 402>;
status = "disabled";
};
@@ -211,7 +212,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 912>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 912>;
};
@@ -226,7 +227,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 911>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 911>;
};
@@ -241,7 +242,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 910>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 910>;
};
@@ -256,7 +257,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 909>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 909>;
};
@@ -271,7 +272,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 908>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 908>;
};
@@ -286,7 +287,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 907>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 907>;
};
@@ -301,7 +302,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 906>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 906>;
};
@@ -316,7 +317,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 905>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 905>;
};
@@ -355,7 +356,7 @@
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 522>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 522>;
#thermal-sensor-cells = <1>;
};
@@ -372,7 +373,7 @@
GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 407>;
};
@@ -384,7 +385,7 @@
reg = <0 0xe6500000 0 0x40>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 931>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 931>;
dmas = <&dmac1 0x91>, <&dmac1 0x90>,
<&dmac2 0x91>, <&dmac2 0x90>;
@@ -401,7 +402,7 @@
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 930>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 930>;
dmas = <&dmac1 0x93>, <&dmac1 0x92>,
<&dmac2 0x93>, <&dmac2 0x92>;
@@ -418,7 +419,7 @@
reg = <0 0xe6510000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 929>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 929>;
dmas = <&dmac1 0x95>, <&dmac1 0x94>,
<&dmac2 0x95>, <&dmac2 0x94>;
@@ -435,7 +436,7 @@
reg = <0 0xe66d0000 0 0x40>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 928>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 928>;
dmas = <&dmac0 0x97>, <&dmac0 0x96>;
dma-names = "tx", "rx";
@@ -451,7 +452,7 @@
reg = <0 0xe66d8000 0 0x40>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 927>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 927>;
dmas = <&dmac0 0x99>, <&dmac0 0x98>;
dma-names = "tx", "rx";
@@ -467,7 +468,7 @@
reg = <0 0xe66e0000 0 0x40>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 919>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 919>;
dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
dma-names = "tx", "rx";
@@ -483,7 +484,7 @@
reg = <0 0xe66e8000 0 0x40>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 918>;
dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
dma-names = "tx", "rx";
@@ -500,7 +501,7 @@
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 926>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 926>;
dmas = <&dmac0 0x11>, <&dmac0 0x10>;
dma-names = "tx", "rx";
@@ -514,13 +515,13 @@
reg = <0 0xe6540000 0 0x60>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 520>,
- <&cpg CPG_CORE 19>,
+ <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x31>, <&dmac1 0x30>,
<&dmac2 0x31>, <&dmac2 0x30>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 520>;
status = "disabled";
};
@@ -532,13 +533,13 @@
reg = <0 0xe6550000 0 0x60>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 519>,
- <&cpg CPG_CORE 19>,
+ <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x33>, <&dmac1 0x32>,
<&dmac2 0x33>, <&dmac2 0x32>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 519>;
status = "disabled";
};
@@ -550,13 +551,13 @@
reg = <0 0xe6560000 0 0x60>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 518>,
- <&cpg CPG_CORE 19>,
+ <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x35>, <&dmac1 0x34>,
<&dmac2 0x35>, <&dmac2 0x34>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 518>;
status = "disabled";
};
@@ -568,12 +569,12 @@
reg = <0 0xe66a0000 0 0x60>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 517>,
- <&cpg CPG_CORE 19>,
+ <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x37>, <&dmac0 0x36>;
dma-names = "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 517>;
status = "disabled";
};
@@ -585,12 +586,12 @@
reg = <0 0xe66b0000 0 0x60>;
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 516>,
- <&cpg CPG_CORE 19>,
+ <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x38>;
dma-names = "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 516>;
status = "disabled";
};
@@ -607,7 +608,7 @@
renesas,buswait = <11>;
phys = <&usb2_phy0>;
phy-names = "usb";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 704>;
status = "disabled";
};
@@ -620,7 +621,7 @@
GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 330>;
#dma-cells = <1>;
dma-channels = <2>;
@@ -634,7 +635,7 @@
GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 331>;
#dma-cells = <1>;
dma-channels = <2>;
@@ -647,7 +648,7 @@
clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
<&usb_extal_clk>;
clock-names = "usb3-if", "usb3s_clk", "usb_extal";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 328>;
#phy-cells = <0>;
status = "disabled";
@@ -681,7 +682,7 @@
"ch12", "ch13", "ch14", "ch15";
clocks = <&cpg CPG_MOD 219>;
clock-names = "fck";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <16>;
@@ -715,7 +716,7 @@
"ch12", "ch13", "ch14", "ch15";
clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <16>;
@@ -749,7 +750,7 @@
"ch12", "ch13", "ch14", "ch15";
clocks = <&cpg CPG_MOD 217>;
clock-names = "fck";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 217>;
#dma-cells = <1>;
dma-channels = <16>;
@@ -759,7 +760,7 @@
compatible = "renesas,ipmmu-r8a774a1";
reg = <0 0xe6740000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 0>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
@@ -767,7 +768,7 @@
compatible = "renesas,ipmmu-r8a774a1";
reg = <0 0xe7740000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 1>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
@@ -775,7 +776,7 @@
compatible = "renesas,ipmmu-r8a774a1";
reg = <0 0xe6570000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 2>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
@@ -784,7 +785,7 @@
reg = <0 0xe67b0000 0 0x1000>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
@@ -792,7 +793,7 @@
compatible = "renesas,ipmmu-r8a774a1";
reg = <0 0xec670000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 4>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
@@ -800,7 +801,7 @@
compatible = "renesas,ipmmu-r8a774a1";
reg = <0 0xfd800000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 5>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
@@ -808,7 +809,7 @@
compatible = "renesas,ipmmu-r8a774a1";
reg = <0 0xfd950000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 6>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
@@ -816,7 +817,7 @@
compatible = "renesas,ipmmu-r8a774a1";
reg = <0 0xfe6b0000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 8>;
- power-domains = <&sysc 14>;
+ power-domains = <&sysc R8A774A1_PD_A3VC>;
#iommu-cells = <1>;
};
@@ -824,7 +825,7 @@
compatible = "renesas,ipmmu-r8a774a1";
reg = <0 0xfebd0000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 9>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
@@ -865,7 +866,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
#address-cells = <1>;
@@ -873,13 +874,37 @@
status = "disabled";
};
+ can0: can@e6c30000 {
+ compatible = "renesas,can-r8a774a1",
+ "renesas,rcar-gen3-can";
+ reg = <0 0xe6c30000 0 0x1000>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 916>, <&can_clk>;
+ clock-names = "clkp1", "can_clk";
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
+ status = "disabled";
+ };
+
+ can1: can@e6c38000 {
+ compatible = "renesas,can-r8a774a1",
+ "renesas,rcar-gen3-can";
+ reg = <0 0xe6c38000 0 0x1000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 915>, <&can_clk>;
+ clock-names = "clkp1", "can_clk";
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
+ status = "disabled";
+ };
+
pwm0: pwm@e6e30000 {
compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
reg = <0 0xe6e30000 0 0x8>;
#pwm-cells = <2>;
clocks = <&cpg CPG_MOD 523>;
resets = <&cpg 523>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -889,7 +914,7 @@
#pwm-cells = <2>;
clocks = <&cpg CPG_MOD 523>;
resets = <&cpg 523>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -899,7 +924,7 @@
#pwm-cells = <2>;
clocks = <&cpg CPG_MOD 523>;
resets = <&cpg 523>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -909,7 +934,7 @@
#pwm-cells = <2>;
clocks = <&cpg CPG_MOD 523>;
resets = <&cpg 523>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -919,7 +944,7 @@
#pwm-cells = <2>;
clocks = <&cpg CPG_MOD 523>;
resets = <&cpg 523>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -929,7 +954,7 @@
#pwm-cells = <2>;
clocks = <&cpg CPG_MOD 523>;
resets = <&cpg 523>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -939,7 +964,7 @@
#pwm-cells = <2>;
clocks = <&cpg CPG_MOD 523>;
resets = <&cpg 523>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -949,13 +974,13 @@
reg = <0 0xe6e60000 0 0x40>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 207>,
- <&cpg CPG_CORE 19>,
+ <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x51>, <&dmac1 0x50>,
<&dmac2 0x51>, <&dmac2 0x50>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 207>;
status = "disabled";
};
@@ -966,13 +991,13 @@
reg = <0 0xe6e68000 0 0x40>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 206>,
- <&cpg CPG_CORE 19>,
+ <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x53>, <&dmac1 0x52>,
<&dmac2 0x53>, <&dmac2 0x52>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 206>;
status = "disabled";
};
@@ -983,10 +1008,10 @@
reg = <0 0xe6e88000 0 0x40>;
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 310>,
- <&cpg CPG_CORE 19>,
+ <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 310>;
status = "disabled";
};
@@ -997,12 +1022,12 @@
reg = <0 0xe6c50000 0 0x40>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 204>,
- <&cpg CPG_CORE 19>,
+ <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x57>, <&dmac0 0x56>;
dma-names = "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 204>;
status = "disabled";
};
@@ -1013,12 +1038,12 @@
reg = <0 0xe6c40000 0 0x40>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 203>,
- <&cpg CPG_CORE 19>,
+ <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x59>, <&dmac0 0x58>;
dma-names = "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 203>;
status = "disabled";
};
@@ -1029,13 +1054,13 @@
reg = <0 0xe6f30000 0 0x40>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 202>,
- <&cpg CPG_CORE 19>,
+ <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
<&dmac2 0x5b>, <&dmac2 0x5a>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 202>;
status = "disabled";
};
@@ -1049,7 +1074,7 @@
dmas = <&dmac1 0x41>, <&dmac1 0x40>,
<&dmac2 0x41>, <&dmac2 0x40>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 211>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1065,7 +1090,7 @@
dmas = <&dmac1 0x43>, <&dmac1 0x42>,
<&dmac2 0x43>, <&dmac2 0x42>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 210>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1080,7 +1105,7 @@
clocks = <&cpg CPG_MOD 209>;
dmas = <&dmac0 0x45>, <&dmac0 0x44>;
dma-names = "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 209>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1095,13 +1120,269 @@
clocks = <&cpg CPG_MOD 208>;
dmas = <&dmac0 0x47>, <&dmac0 0x46>;
dma-names = "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 208>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
+ vin0: video@e6ef0000 {
+ compatible = "renesas,vin-r8a774a1";
+ reg = <0 0xe6ef0000 0 0x1000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 811>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 811>;
+ renesas,id = <0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin0csi20: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&csi20vin0>;
+ };
+ vin0csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin0>;
+ };
+ };
+ };
+ };
+
+ vin1: video@e6ef1000 {
+ compatible = "renesas,vin-r8a774a1";
+ reg = <0 0xe6ef1000 0 0x1000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 810>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 810>;
+ renesas,id = <1>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin1csi20: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&csi20vin1>;
+ };
+ vin1csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin1>;
+ };
+ };
+ };
+ };
+
+ vin2: video@e6ef2000 {
+ compatible = "renesas,vin-r8a774a1";
+ reg = <0 0xe6ef2000 0 0x1000>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 809>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 809>;
+ renesas,id = <2>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin2csi20: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&csi20vin2>;
+ };
+ vin2csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin2>;
+ };
+ };
+ };
+ };
+
+ vin3: video@e6ef3000 {
+ compatible = "renesas,vin-r8a774a1";
+ reg = <0 0xe6ef3000 0 0x1000>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 808>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 808>;
+ renesas,id = <3>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin3csi20: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&csi20vin3>;
+ };
+ vin3csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin3>;
+ };
+ };
+ };
+ };
+
+ vin4: video@e6ef4000 {
+ compatible = "renesas,vin-r8a774a1";
+ reg = <0 0xe6ef4000 0 0x1000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 807>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 807>;
+ renesas,id = <4>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin4csi20: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&csi20vin4>;
+ };
+ vin4csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin4>;
+ };
+ };
+ };
+ };
+
+ vin5: video@e6ef5000 {
+ compatible = "renesas,vin-r8a774a1";
+ reg = <0 0xe6ef5000 0 0x1000>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 806>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 806>;
+ renesas,id = <5>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin5csi20: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&csi20vin5>;
+ };
+ vin5csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin5>;
+ };
+ };
+ };
+ };
+
+ vin6: video@e6ef6000 {
+ compatible = "renesas,vin-r8a774a1";
+ reg = <0 0xe6ef6000 0 0x1000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 805>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 805>;
+ renesas,id = <6>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin6csi20: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&csi20vin6>;
+ };
+ vin6csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin6>;
+ };
+ };
+ };
+ };
+
+ vin7: video@e6ef7000 {
+ compatible = "renesas,vin-r8a774a1";
+ reg = <0 0xe6ef7000 0 0x1000>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 804>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 804>;
+ renesas,id = <7>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin7csi20: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&csi20vin7>;
+ };
+ vin7csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin7>;
+ };
+ };
+ };
+ };
+
rcar_sound: sound@ec500000 {
/*
* #sound-dai-cells is required
@@ -1139,7 +1420,7 @@
<&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
<&audio_clk_a>, <&audio_clk_b>,
<&audio_clk_c>,
- <&cpg CPG_CORE 10>;
+ <&cpg CPG_CORE R8A774A1_CLK_S0D4>;
clock-names = "ssi-all",
"ssi.9", "ssi.8", "ssi.7", "ssi.6",
"ssi.5", "ssi.4", "ssi.3", "ssi.2",
@@ -1151,7 +1432,7 @@
"ctu.1", "ctu.0",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 1005>,
<&cpg 1006>, <&cpg 1007>,
<&cpg 1008>, <&cpg 1009>,
@@ -1337,7 +1618,7 @@
"ch12", "ch13", "ch14", "ch15";
clocks = <&cpg CPG_MOD 502>;
clock-names = "fck";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 502>;
#dma-cells = <1>;
dma-channels = <16>;
@@ -1371,7 +1652,7 @@
"ch12", "ch13", "ch14", "ch15";
clocks = <&cpg CPG_MOD 501>;
clock-names = "fck";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 501>;
#dma-cells = <1>;
dma-channels = <16>;
@@ -1383,7 +1664,7 @@
reg = <0 0xee000000 0 0xc00>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 328>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 328>;
status = "disabled";
};
@@ -1394,7 +1675,7 @@
reg = <0 0xee020000 0 0x400>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 328>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 328>;
status = "disabled";
};
@@ -1406,7 +1687,7 @@
clocks = <&cpg CPG_MOD 703>;
phys = <&usb2_phy0>;
phy-names = "usb";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 703>;
status = "disabled";
};
@@ -1418,7 +1699,7 @@
clocks = <&cpg CPG_MOD 702>;
phys = <&usb2_phy1>;
phy-names = "usb";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 702>;
status = "disabled";
};
@@ -1431,7 +1712,7 @@
phys = <&usb2_phy0>;
phy-names = "usb";
companion = <&ohci0>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 703>;
status = "disabled";
};
@@ -1444,7 +1725,7 @@
phys = <&usb2_phy1>;
phy-names = "usb";
companion = <&ohci1>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 702>;
status = "disabled";
};
@@ -1455,7 +1736,7 @@
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 703>;
#phy-cells = <0>;
status = "disabled";
@@ -1466,7 +1747,7 @@
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee0a0200 0 0x700>;
clocks = <&cpg CPG_MOD 702>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 702>;
#phy-cells = <0>;
status = "disabled";
@@ -1479,7 +1760,7 @@
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 314>;
max-frequency = <200000000>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 314>;
status = "disabled";
};
@@ -1491,7 +1772,7 @@
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 313>;
max-frequency = <200000000>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 313>;
status = "disabled";
};
@@ -1503,7 +1784,7 @@
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 312>;
max-frequency = <200000000>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 312>;
status = "disabled";
};
@@ -1515,7 +1796,7 @@
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 311>;
max-frequency = <200000000>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 311>;
status = "disabled";
};
@@ -1533,7 +1814,7 @@
(GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 408>;
};
@@ -1541,7 +1822,7 @@
compatible = "renesas,fcpf";
reg = <0 0xfe950000 0 0x200>;
clocks = <&cpg CPG_MOD 615>;
- power-domains = <&sysc 14>;
+ power-domains = <&sysc R8A774A1_PD_A3VC>;
resets = <&cpg 615>;
};
@@ -1549,7 +1830,7 @@
compatible = "renesas,fcpv";
reg = <0 0xfe96f000 0 0x200>;
clocks = <&cpg CPG_MOD 607>;
- power-domains = <&sysc 14>;
+ power-domains = <&sysc R8A774A1_PD_A3VC>;
resets = <&cpg 607>;
};
@@ -1557,7 +1838,7 @@
compatible = "renesas,fcpv";
reg = <0 0xfea27000 0 0x200>;
clocks = <&cpg CPG_MOD 603>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 603>;
iommus = <&ipmmu_vi0 8>;
};
@@ -1566,7 +1847,7 @@
compatible = "renesas,fcpv";
reg = <0 0xfea2f000 0 0x200>;
clocks = <&cpg CPG_MOD 602>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 602>;
iommus = <&ipmmu_vi0 9>;
};
@@ -1575,7 +1856,7 @@
compatible = "renesas,fcpv";
reg = <0 0xfea37000 0 0x200>;
clocks = <&cpg CPG_MOD 601>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 601>;
iommus = <&ipmmu_vi0 10>;
};
@@ -1584,11 +1865,122 @@
compatible = "renesas,fcpv";
reg = <0 0xfe9af000 0 0x200>;
clocks = <&cpg CPG_MOD 611>;
- power-domains = <&sysc 14>;
+ power-domains = <&sysc R8A774A1_PD_A3VC>;
resets = <&cpg 611>;
iommus = <&ipmmu_vc0 19>;
};
+ csi20: csi2@fea80000 {
+ compatible = "renesas,r8a774a1-csi2";
+ reg = <0 0xfea80000 0 0x10000>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 714>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 714>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ csi20vin0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vin0csi20>;
+ };
+ csi20vin1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vin1csi20>;
+ };
+ csi20vin2: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&vin2csi20>;
+ };
+ csi20vin3: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&vin3csi20>;
+ };
+ csi20vin4: endpoint@4 {
+ reg = <4>;
+ remote-endpoint = <&vin4csi20>;
+ };
+ csi20vin5: endpoint@5 {
+ reg = <5>;
+ remote-endpoint = <&vin5csi20>;
+ };
+ csi20vin6: endpoint@6 {
+ reg = <6>;
+ remote-endpoint = <&vin6csi20>;
+ };
+ csi20vin7: endpoint@7 {
+ reg = <7>;
+ remote-endpoint = <&vin7csi20>;
+ };
+ };
+ };
+ };
+
+ csi40: csi2@feaa0000 {
+ compatible = "renesas,r8a774a1-csi2";
+ reg = <0 0xfeaa0000 0 0x10000>;
+ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 716>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ csi40vin0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vin0csi40>;
+ };
+ csi40vin1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vin1csi40>;
+ };
+ csi40vin2: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&vin2csi40>;
+ };
+ csi40vin3: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&vin3csi40>;
+ };
+ csi40vin4: endpoint@4 {
+ reg = <4>;
+ remote-endpoint = <&vin4csi40>;
+ };
+ csi40vin5: endpoint@5 {
+ reg = <5>;
+ remote-endpoint = <&vin5csi40>;
+ };
+ csi40vin6: endpoint@6 {
+ reg = <6>;
+ remote-endpoint = <&vin6csi40>;
+ };
+ csi40vin7: endpoint@7 {
+ reg = <7>;
+ remote-endpoint = <&vin7csi40>;
+ };
+ };
+
+ };
+ };
+
prr: chipid@fff00044 {
compatible = "renesas,prr";
reg = <0 0xfff00044 0 4>;
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
index 0895503..c1a56ea 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
@@ -112,6 +112,7 @@
ports {
/* rsnd_port0 is on salvator-common */
rsnd_port1: port@1 {
+ reg = <1>;
rsnd_endpoint1: endpoint {
remote-endpoint = <&dw_hdmi0_snd_in>;
@@ -123,6 +124,7 @@
};
};
rsnd_port2: port@2 {
+ reg = <2>;
rsnd_endpoint2: endpoint {
remote-endpoint = <&dw_hdmi1_snd_in>;
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
index 0fb84c2..40d10da 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
@@ -28,6 +28,7 @@
compatible = "renesas,ipmmu-r8a7795";
reg = <0 0xec680000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 5>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
@@ -35,6 +36,7 @@
compatible = "renesas,ipmmu-r8a7795";
reg = <0 0xe7730000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 8>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index 1620e8d..d2d48b3 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -112,6 +112,7 @@
ports {
/* rsnd_port0 is on salvator-common */
rsnd_port1: port@1 {
+ reg = <1>;
rsnd_endpoint1: endpoint {
remote-endpoint = <&dw_hdmi0_snd_in>;
@@ -123,6 +124,7 @@
};
};
rsnd_port2: port@2 {
+ reg = <2>;
rsnd_endpoint2: endpoint {
remote-endpoint = <&dw_hdmi1_snd_in>;
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
index cf08a11..42101fc 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
@@ -127,6 +127,7 @@
ports {
/* rsnd_port0 is on salvator-common */
rsnd_port1: port@1 {
+ reg = <1>;
rsnd_endpoint1: endpoint {
remote-endpoint = <&dw_hdmi0_snd_in>;
@@ -138,6 +139,7 @@
};
};
rsnd_port2: port@2 {
+ reg = <2>;
rsnd_endpoint2: endpoint {
remote-endpoint = <&dw_hdmi1_snd_in>;
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index b5f2273..af9605d 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -116,6 +116,38 @@
#address-cells = <1>;
#size-cells = <0>;
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&a57_0>;
+ };
+ core1 {
+ cpu = <&a57_1>;
+ };
+ core2 {
+ cpu = <&a57_2>;
+ };
+ core3 {
+ cpu = <&a57_3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&a53_0>;
+ };
+ core1 {
+ cpu = <&a53_1>;
+ };
+ core2 {
+ cpu = <&a53_2>;
+ };
+ core3 {
+ cpu = <&a53_3>;
+ };
+ };
+ };
+
a57_0: cpu@0 {
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x0>;
@@ -125,6 +157,7 @@
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
+ capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
};
@@ -137,6 +170,7 @@
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
+ capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
};
@@ -149,6 +183,7 @@
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
+ capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
};
@@ -161,6 +196,7 @@
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
+ capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
};
@@ -173,6 +209,7 @@
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
+ capacity-dmips-mhz = <535>;
};
a53_1: cpu@101 {
@@ -184,6 +221,7 @@
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
+ capacity-dmips-mhz = <535>;
};
a53_2: cpu@102 {
@@ -195,6 +233,7 @@
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
+ capacity-dmips-mhz = <535>;
};
a53_3: cpu@103 {
@@ -206,6 +245,7 @@
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
+ capacity-dmips-mhz = <535>;
};
L2_CA57: cache-controller-0 {
@@ -652,7 +692,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x35>, <&dmac1 0x34>,
<&dmac2 0x35>, <&dmac2 0x34>;
- dma-names = "tx", "rx";
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 518>;
status = "disabled";
@@ -695,7 +735,7 @@
hsusb: usb@e6590000 {
compatible = "renesas,usbhs-r8a7795",
"renesas,rcar-gen3-usbhs";
- reg = <0 0xe6590000 0 0x100>;
+ reg = <0 0xe6590000 0 0x200>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
@@ -712,7 +752,7 @@
hsusb3: usb@e659c000 {
compatible = "renesas,usbhs-r8a7795",
"renesas,rcar-gen3-usbhs";
- reg = <0 0xe659c000 0 0x100>;
+ reg = <0 0xe659c000 0 0x200>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 705>, <&cpg CPG_MOD 700>;
dmas = <&usb_dmac2 0>, <&usb_dmac2 1>,
@@ -1920,6 +1960,217 @@
};
};
+ rcar_sound,ssiu {
+ ssiu00: ssiu-0 {
+ dmas = <&audma0 0x15>, <&audma1 0x16>;
+ dma-names = "rx", "tx";
+ };
+ ssiu01: ssiu-1 {
+ dmas = <&audma0 0x35>, <&audma1 0x36>;
+ dma-names = "rx", "tx";
+ };
+ ssiu02: ssiu-2 {
+ dmas = <&audma0 0x37>, <&audma1 0x38>;
+ dma-names = "rx", "tx";
+ };
+ ssiu03: ssiu-3 {
+ dmas = <&audma0 0x47>, <&audma1 0x48>;
+ dma-names = "rx", "tx";
+ };
+ ssiu04: ssiu-4 {
+ dmas = <&audma0 0x3F>, <&audma1 0x40>;
+ dma-names = "rx", "tx";
+ };
+ ssiu05: ssiu-5 {
+ dmas = <&audma0 0x43>, <&audma1 0x44>;
+ dma-names = "rx", "tx";
+ };
+ ssiu06: ssiu-6 {
+ dmas = <&audma0 0x4F>, <&audma1 0x50>;
+ dma-names = "rx", "tx";
+ };
+ ssiu07: ssiu-7 {
+ dmas = <&audma0 0x53>, <&audma1 0x54>;
+ dma-names = "rx", "tx";
+ };
+ ssiu10: ssiu-8 {
+ dmas = <&audma0 0x49>, <&audma1 0x4a>;
+ dma-names = "rx", "tx";
+ };
+ ssiu11: ssiu-9 {
+ dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+ dma-names = "rx", "tx";
+ };
+ ssiu12: ssiu-10 {
+ dmas = <&audma0 0x57>, <&audma1 0x58>;
+ dma-names = "rx", "tx";
+ };
+ ssiu13: ssiu-11 {
+ dmas = <&audma0 0x59>, <&audma1 0x5A>;
+ dma-names = "rx", "tx";
+ };
+ ssiu14: ssiu-12 {
+ dmas = <&audma0 0x5F>, <&audma1 0x60>;
+ dma-names = "rx", "tx";
+ };
+ ssiu15: ssiu-13 {
+ dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+ dma-names = "rx", "tx";
+ };
+ ssiu16: ssiu-14 {
+ dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+ dma-names = "rx", "tx";
+ };
+ ssiu17: ssiu-15 {
+ dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+ dma-names = "rx", "tx";
+ };
+ ssiu20: ssiu-16 {
+ dmas = <&audma0 0x63>, <&audma1 0x64>;
+ dma-names = "rx", "tx";
+ };
+ ssiu21: ssiu-17 {
+ dmas = <&audma0 0x67>, <&audma1 0x68>;
+ dma-names = "rx", "tx";
+ };
+ ssiu22: ssiu-18 {
+ dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+ dma-names = "rx", "tx";
+ };
+ ssiu23: ssiu-19 {
+ dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+ dma-names = "rx", "tx";
+ };
+ ssiu24: ssiu-20 {
+ dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+ dma-names = "rx", "tx";
+ };
+ ssiu25: ssiu-21 {
+ dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+ dma-names = "rx", "tx";
+ };
+ ssiu26: ssiu-22 {
+ dmas = <&audma0 0xED>, <&audma1 0xEE>;
+ dma-names = "rx", "tx";
+ };
+ ssiu27: ssiu-23 {
+ dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+ dma-names = "rx", "tx";
+ };
+ ssiu30: ssiu-24 {
+ dmas = <&audma0 0x6f>, <&audma1 0x70>;
+ dma-names = "rx", "tx";
+ };
+ ssiu31: ssiu-25 {
+ dmas = <&audma0 0x21>, <&audma1 0x22>;
+ dma-names = "rx", "tx";
+ };
+ ssiu32: ssiu-26 {
+ dmas = <&audma0 0x23>, <&audma1 0x24>;
+ dma-names = "rx", "tx";
+ };
+ ssiu33: ssiu-27 {
+ dmas = <&audma0 0x25>, <&audma1 0x26>;
+ dma-names = "rx", "tx";
+ };
+ ssiu34: ssiu-28 {
+ dmas = <&audma0 0x27>, <&audma1 0x28>;
+ dma-names = "rx", "tx";
+ };
+ ssiu35: ssiu-29 {
+ dmas = <&audma0 0x29>, <&audma1 0x2A>;
+ dma-names = "rx", "tx";
+ };
+ ssiu36: ssiu-30 {
+ dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+ dma-names = "rx", "tx";
+ };
+ ssiu37: ssiu-31 {
+ dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+ dma-names = "rx", "tx";
+ };
+ ssiu40: ssiu-32 {
+ dmas = <&audma0 0x71>, <&audma1 0x72>;
+ dma-names = "rx", "tx";
+ };
+ ssiu41: ssiu-33 {
+ dmas = <&audma0 0x17>, <&audma1 0x18>;
+ dma-names = "rx", "tx";
+ };
+ ssiu42: ssiu-34 {
+ dmas = <&audma0 0x19>, <&audma1 0x1A>;
+ dma-names = "rx", "tx";
+ };
+ ssiu43: ssiu-35 {
+ dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+ dma-names = "rx", "tx";
+ };
+ ssiu44: ssiu-36 {
+ dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+ dma-names = "rx", "tx";
+ };
+ ssiu45: ssiu-37 {
+ dmas = <&audma0 0x1F>, <&audma1 0x20>;
+ dma-names = "rx", "tx";
+ };
+ ssiu46: ssiu-38 {
+ dmas = <&audma0 0x31>, <&audma1 0x32>;
+ dma-names = "rx", "tx";
+ };
+ ssiu47: ssiu-39 {
+ dmas = <&audma0 0x33>, <&audma1 0x34>;
+ dma-names = "rx", "tx";
+ };
+ ssiu50: ssiu-40 {
+ dmas = <&audma0 0x73>, <&audma1 0x74>;
+ dma-names = "rx", "tx";
+ };
+ ssiu60: ssiu-41 {
+ dmas = <&audma0 0x75>, <&audma1 0x76>;
+ dma-names = "rx", "tx";
+ };
+ ssiu70: ssiu-42 {
+ dmas = <&audma0 0x79>, <&audma1 0x7a>;
+ dma-names = "rx", "tx";
+ };
+ ssiu80: ssiu-43 {
+ dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+ dma-names = "rx", "tx";
+ };
+ ssiu90: ssiu-44 {
+ dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+ dma-names = "rx", "tx";
+ };
+ ssiu91: ssiu-45 {
+ dmas = <&audma0 0x7F>, <&audma1 0x80>;
+ dma-names = "rx", "tx";
+ };
+ ssiu92: ssiu-46 {
+ dmas = <&audma0 0x81>, <&audma1 0x82>;
+ dma-names = "rx", "tx";
+ };
+ ssiu93: ssiu-47 {
+ dmas = <&audma0 0x83>, <&audma1 0x84>;
+ dma-names = "rx", "tx";
+ };
+ ssiu94: ssiu-48 {
+ dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+ dma-names = "rx", "tx";
+ };
+ ssiu95: ssiu-49 {
+ dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+ dma-names = "rx", "tx";
+ };
+ ssiu96: ssiu-50 {
+ dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+ dma-names = "rx", "tx";
+ };
+ ssiu97: ssiu-51 {
+ dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+ dma-names = "rx", "tx";
+ };
+ };
+
rcar_sound,ssi {
ssi0: ssi-0 {
interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
@@ -1972,20 +2223,6 @@
dma-names = "rx", "tx", "rxu", "txu";
};
};
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- };
- port@1 {
- reg = <1>;
- };
- port@2 {
- reg = <2>;
- };
- };
};
audma0: dma-controller@ec700000 {
@@ -2878,7 +3115,10 @@
cooling-maps {
map0 {
trip = <&sensor1_passive>;
- cooling-device = <&a57_0 4 4>;
+ cooling-device = <&a57_0 4 4>,
+ <&a57_1 4 4>,
+ <&a57_2 4 4>,
+ <&a57_3 4 4>;
};
};
};
@@ -2904,7 +3144,10 @@
cooling-maps {
map0 {
trip = <&sensor2_passive>;
- cooling-device = <&a57_0 4 4>;
+ cooling-device = <&a57_0 4 4>,
+ <&a57_1 4 4>,
+ <&a57_2 4 4>,
+ <&a57_3 4 4>;
};
};
};
@@ -2930,7 +3173,10 @@
cooling-maps {
map0 {
trip = <&sensor3_passive>;
- cooling-device = <&a57_0 4 4>;
+ cooling-device = <&a57_0 4 4>,
+ <&a57_1 4 4>,
+ <&a57_2 4 4>,
+ <&a57_3 4 4>;
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 1ec6aaa..afedbf5 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -127,6 +127,32 @@
#address-cells = <1>;
#size-cells = <0>;
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&a57_0>;
+ };
+ core1 {
+ cpu = <&a57_1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&a53_0>;
+ };
+ core1 {
+ cpu = <&a53_1>;
+ };
+ core2 {
+ cpu = <&a53_2>;
+ };
+ core3 {
+ cpu = <&a53_3>;
+ };
+ };
+ };
+
a57_0: cpu@0 {
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x0>;
@@ -136,6 +162,7 @@
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A7796_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
+ capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
};
@@ -148,6 +175,7 @@
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A7796_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
+ capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
};
@@ -160,6 +188,7 @@
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
+ capacity-dmips-mhz = <535>;
};
a53_1: cpu@101 {
@@ -171,6 +200,7 @@
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
+ capacity-dmips-mhz = <535>;
};
a53_2: cpu@102 {
@@ -182,6 +212,7 @@
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
+ capacity-dmips-mhz = <535>;
};
a53_3: cpu@103 {
@@ -193,6 +224,7 @@
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
+ capacity-dmips-mhz = <535>;
};
L2_CA57: cache-controller-0 {
@@ -401,6 +433,76 @@
reg = <0 0xe6060000 0 0x50c>;
};
+ cmt0: timer@e60f0000 {
+ compatible = "renesas,r8a7796-cmt0",
+ "renesas,rcar-gen3-cmt0";
+ reg = <0 0xe60f0000 0 0x1004>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 303>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 303>;
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,r8a7796-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 302>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 302>;
+ status = "disabled";
+ };
+
+ cmt2: timer@e6140000 {
+ compatible = "renesas,r8a7796-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6140000 0 0x1004>;
+ interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 301>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 301>;
+ status = "disabled";
+ };
+
+ cmt3: timer@e6148000 {
+ compatible = "renesas,r8a7796-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6148000 0 0x1004>;
+ interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 300>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 300>;
+ status = "disabled";
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a7796-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
@@ -674,7 +776,7 @@
hsusb: usb@e6590000 {
compatible = "renesas,usbhs-r8a7796",
"renesas,rcar-gen3-usbhs";
- reg = <0 0xe6590000 0 0x100>;
+ reg = <0 0xe6590000 0 0x200>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
@@ -1794,6 +1896,217 @@
};
};
+ rcar_sound,ssiu {
+ ssiu00: ssiu-0 {
+ dmas = <&audma0 0x15>, <&audma1 0x16>;
+ dma-names = "rx", "tx";
+ };
+ ssiu01: ssiu-1 {
+ dmas = <&audma0 0x35>, <&audma1 0x36>;
+ dma-names = "rx", "tx";
+ };
+ ssiu02: ssiu-2 {
+ dmas = <&audma0 0x37>, <&audma1 0x38>;
+ dma-names = "rx", "tx";
+ };
+ ssiu03: ssiu-3 {
+ dmas = <&audma0 0x47>, <&audma1 0x48>;
+ dma-names = "rx", "tx";
+ };
+ ssiu04: ssiu-4 {
+ dmas = <&audma0 0x3F>, <&audma1 0x40>;
+ dma-names = "rx", "tx";
+ };
+ ssiu05: ssiu-5 {
+ dmas = <&audma0 0x43>, <&audma1 0x44>;
+ dma-names = "rx", "tx";
+ };
+ ssiu06: ssiu-6 {
+ dmas = <&audma0 0x4F>, <&audma1 0x50>;
+ dma-names = "rx", "tx";
+ };
+ ssiu07: ssiu-7 {
+ dmas = <&audma0 0x53>, <&audma1 0x54>;
+ dma-names = "rx", "tx";
+ };
+ ssiu10: ssiu-8 {
+ dmas = <&audma0 0x49>, <&audma1 0x4a>;
+ dma-names = "rx", "tx";
+ };
+ ssiu11: ssiu-9 {
+ dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+ dma-names = "rx", "tx";
+ };
+ ssiu12: ssiu-10 {
+ dmas = <&audma0 0x57>, <&audma1 0x58>;
+ dma-names = "rx", "tx";
+ };
+ ssiu13: ssiu-11 {
+ dmas = <&audma0 0x59>, <&audma1 0x5A>;
+ dma-names = "rx", "tx";
+ };
+ ssiu14: ssiu-12 {
+ dmas = <&audma0 0x5F>, <&audma1 0x60>;
+ dma-names = "rx", "tx";
+ };
+ ssiu15: ssiu-13 {
+ dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+ dma-names = "rx", "tx";
+ };
+ ssiu16: ssiu-14 {
+ dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+ dma-names = "rx", "tx";
+ };
+ ssiu17: ssiu-15 {
+ dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+ dma-names = "rx", "tx";
+ };
+ ssiu20: ssiu-16 {
+ dmas = <&audma0 0x63>, <&audma1 0x64>;
+ dma-names = "rx", "tx";
+ };
+ ssiu21: ssiu-17 {
+ dmas = <&audma0 0x67>, <&audma1 0x68>;
+ dma-names = "rx", "tx";
+ };
+ ssiu22: ssiu-18 {
+ dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+ dma-names = "rx", "tx";
+ };
+ ssiu23: ssiu-19 {
+ dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+ dma-names = "rx", "tx";
+ };
+ ssiu24: ssiu-20 {
+ dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+ dma-names = "rx", "tx";
+ };
+ ssiu25: ssiu-21 {
+ dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+ dma-names = "rx", "tx";
+ };
+ ssiu26: ssiu-22 {
+ dmas = <&audma0 0xED>, <&audma1 0xEE>;
+ dma-names = "rx", "tx";
+ };
+ ssiu27: ssiu-23 {
+ dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+ dma-names = "rx", "tx";
+ };
+ ssiu30: ssiu-24 {
+ dmas = <&audma0 0x6f>, <&audma1 0x70>;
+ dma-names = "rx", "tx";
+ };
+ ssiu31: ssiu-25 {
+ dmas = <&audma0 0x21>, <&audma1 0x22>;
+ dma-names = "rx", "tx";
+ };
+ ssiu32: ssiu-26 {
+ dmas = <&audma0 0x23>, <&audma1 0x24>;
+ dma-names = "rx", "tx";
+ };
+ ssiu33: ssiu-27 {
+ dmas = <&audma0 0x25>, <&audma1 0x26>;
+ dma-names = "rx", "tx";
+ };
+ ssiu34: ssiu-28 {
+ dmas = <&audma0 0x27>, <&audma1 0x28>;
+ dma-names = "rx", "tx";
+ };
+ ssiu35: ssiu-29 {
+ dmas = <&audma0 0x29>, <&audma1 0x2A>;
+ dma-names = "rx", "tx";
+ };
+ ssiu36: ssiu-30 {
+ dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+ dma-names = "rx", "tx";
+ };
+ ssiu37: ssiu-31 {
+ dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+ dma-names = "rx", "tx";
+ };
+ ssiu40: ssiu-32 {
+ dmas = <&audma0 0x71>, <&audma1 0x72>;
+ dma-names = "rx", "tx";
+ };
+ ssiu41: ssiu-33 {
+ dmas = <&audma0 0x17>, <&audma1 0x18>;
+ dma-names = "rx", "tx";
+ };
+ ssiu42: ssiu-34 {
+ dmas = <&audma0 0x19>, <&audma1 0x1A>;
+ dma-names = "rx", "tx";
+ };
+ ssiu43: ssiu-35 {
+ dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+ dma-names = "rx", "tx";
+ };
+ ssiu44: ssiu-36 {
+ dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+ dma-names = "rx", "tx";
+ };
+ ssiu45: ssiu-37 {
+ dmas = <&audma0 0x1F>, <&audma1 0x20>;
+ dma-names = "rx", "tx";
+ };
+ ssiu46: ssiu-38 {
+ dmas = <&audma0 0x31>, <&audma1 0x32>;
+ dma-names = "rx", "tx";
+ };
+ ssiu47: ssiu-39 {
+ dmas = <&audma0 0x33>, <&audma1 0x34>;
+ dma-names = "rx", "tx";
+ };
+ ssiu50: ssiu-40 {
+ dmas = <&audma0 0x73>, <&audma1 0x74>;
+ dma-names = "rx", "tx";
+ };
+ ssiu60: ssiu-41 {
+ dmas = <&audma0 0x75>, <&audma1 0x76>;
+ dma-names = "rx", "tx";
+ };
+ ssiu70: ssiu-42 {
+ dmas = <&audma0 0x79>, <&audma1 0x7a>;
+ dma-names = "rx", "tx";
+ };
+ ssiu80: ssiu-43 {
+ dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+ dma-names = "rx", "tx";
+ };
+ ssiu90: ssiu-44 {
+ dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+ dma-names = "rx", "tx";
+ };
+ ssiu91: ssiu-45 {
+ dmas = <&audma0 0x7F>, <&audma1 0x80>;
+ dma-names = "rx", "tx";
+ };
+ ssiu92: ssiu-46 {
+ dmas = <&audma0 0x81>, <&audma1 0x82>;
+ dma-names = "rx", "tx";
+ };
+ ssiu93: ssiu-47 {
+ dmas = <&audma0 0x83>, <&audma1 0x84>;
+ dma-names = "rx", "tx";
+ };
+ ssiu94: ssiu-48 {
+ dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+ dma-names = "rx", "tx";
+ };
+ ssiu95: ssiu-49 {
+ dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+ dma-names = "rx", "tx";
+ };
+ ssiu96: ssiu-50 {
+ dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+ dma-names = "rx", "tx";
+ };
+ ssiu97: ssiu-51 {
+ dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+ dma-names = "rx", "tx";
+ };
+ };
+
rcar_sound,ssi {
ssi0: ssi-0 {
interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
@@ -2526,7 +2839,7 @@
cooling-maps {
map0 {
trip = <&sensor1_passive>;
- cooling-device = <&a57_0 5 5>;
+ cooling-device = <&a57_0 5 5>, <&a57_1 5 5>;
};
};
};
@@ -2552,7 +2865,7 @@
cooling-maps {
map0 {
trip = <&sensor2_passive>;
- cooling-device = <&a57_0 5 5>;
+ cooling-device = <&a57_0 5 5>, <&a57_1 5 5>;
};
};
};
@@ -2578,7 +2891,7 @@
cooling-maps {
map0 {
trip = <&sensor3_passive>;
- cooling-device = <&a57_0 5 5>;
+ cooling-device = <&a57_0 5 5>, <&a57_1 5 5>;
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 83946ca..6dc9b1f 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -590,7 +590,7 @@
hsusb: usb@e6590000 {
compatible = "renesas,usbhs-r8a77965",
"renesas,rcar-gen3-usbhs";
- reg = <0 0xe6590000 0 0x100>;
+ reg = <0 0xe6590000 0 0x200>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
@@ -795,14 +795,6 @@
#iommu-cells = <1>;
};
- ipmmu_ir: mmu@ff8b0000 {
- compatible = "renesas,ipmmu-r8a77965";
- reg = <0 0xff8b0000 0 0x1000>;
- renesas,ipmmu-main = <&ipmmu_mm 3>;
- power-domains = <&sysc R8A77965_PD_A3IR>;
- #iommu-cells = <1>;
- };
-
ipmmu_mm: mmu@e67b0000 {
compatible = "renesas,ipmmu-r8a77965";
reg = <0 0xe67b0000 0 0x1000>;
@@ -900,19 +892,67 @@
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
+ iommus = <&ipmmu_ds0 16>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
can0: can@e6c30000 {
+ compatible = "renesas,can-r8a77965",
+ "renesas,rcar-gen3-can";
reg = <0 0xe6c30000 0 0x1000>;
- /* placeholder */
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 916>,
+ <&cpg CPG_CORE R8A77965_CLK_CANFD>,
+ <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
+ assigned-clocks = <&cpg CPG_CORE R8A77965_CLK_CANFD>;
+ assigned-clock-rates = <40000000>;
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
+ status = "disabled";
};
can1: can@e6c38000 {
+ compatible = "renesas,can-r8a77965",
+ "renesas,rcar-gen3-can";
reg = <0 0xe6c38000 0 0x1000>;
- /* placeholder */
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 915>,
+ <&cpg CPG_CORE R8A77965_CLK_CANFD>,
+ <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
+ assigned-clocks = <&cpg CPG_CORE R8A77965_CLK_CANFD>;
+ assigned-clock-rates = <40000000>;
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
+ status = "disabled";
+ };
+
+ canfd: can@e66c0000 {
+ compatible = "renesas,r8a77965-canfd",
+ "renesas,rcar-gen3-canfd";
+ reg = <0 0xe66c0000 0 0x8000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 914>,
+ <&cpg CPG_CORE R8A77965_CLK_CANFD>,
+ <&can_clk>;
+ clock-names = "fck", "canfd", "can_clk";
+ assigned-clocks = <&cpg CPG_CORE R8A77965_CLK_CANFD>;
+ assigned-clock-rates = <40000000>;
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 914>;
+ status = "disabled";
+
+ channel0 {
+ status = "disabled";
+ };
+
+ channel1 {
+ status = "disabled";
+ };
};
pwm0: pwm@e6e30000 {
@@ -2153,6 +2193,33 @@
port@2 {
reg = <2>;
du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds@feb90000 {
+ compatible = "renesas,r8a77965-lvds";
+ reg = <0 0xfeb90000 0 0x14>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 727>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index cba7885..563428d 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -300,6 +300,19 @@
#power-domain-cells = <1>;
};
+ thermal: thermal@e6190000 {
+ compatible = "renesas,thermal-r8a77970";
+ reg = <0 0xe6190000 0 0x10
+ 0 0xe6190100 0 0x120>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
+ #thermal-sensor-cells = <0>;
+ };
+
intc_ex: interrupt-controller@e61c0000 {
compatible = "renesas,intc-ex-r8a77970", "renesas,irqc";
#interrupt-cells = <2>;
@@ -316,6 +329,71 @@
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a77970", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@e6fc0000 {
+ compatible = "renesas,tmu-r8a77970", "renesas,tmu";
+ reg = <0 0xe6fc0000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 124>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
+ status = "disabled";
+ };
+
+ tmu2: timer@e6fd0000 {
+ compatible = "renesas,tmu-r8a77970", "renesas,tmu";
+ reg = <0 0xe6fd0000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 123>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 123>;
+ status = "disabled";
+ };
+
+ tmu3: timer@e6fe0000 {
+ compatible = "renesas,tmu-r8a77970", "renesas,tmu";
+ reg = <0 0xe6fe0000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu4: timer@ffc00000 {
+ compatible = "renesas,tmu-r8a77970", "renesas,tmu";
+ reg = <0 0xffc00000 0 0x30>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
i2c0: i2c@e6500000 {
compatible = "renesas,i2c-r8a77970",
"renesas,rcar-gen3-i2c";
@@ -543,6 +621,56 @@
status = "disabled";
};
+ pwm0: pwm@e6e30000 {
+ compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@e6e31000 {
+ compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@e6e32000 {
+ compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@e6e33000 {
+ compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@e6e34000 {
+ compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ status = "disabled";
+ };
+
scif0: serial@e6e60000 {
compatible = "renesas,scif-r8a77970",
"renesas,rcar-gen3-scif",
@@ -625,6 +753,70 @@
status = "disabled";
};
+ msiof0: spi@e6e90000 {
+ compatible = "renesas,msiof-r8a77970",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6e90000 0 0x64>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 211>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 211>;
+ dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+ <&dmac2 0x41>, <&dmac2 0x40>;
+ dma-names = "tx", "rx", "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6ea0000 {
+ compatible = "renesas,msiof-r8a77970",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6ea0000 0 0x0064>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 210>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 210>;
+ dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+ <&dmac2 0x43>, <&dmac2 0x42>;
+ dma-names = "tx", "rx", "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6c00000 {
+ compatible = "renesas,msiof-r8a77970",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c00000 0 0x0064>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 209>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 209>;
+ dmas = <&dmac1 0x45>, <&dmac1 0x44>,
+ <&dmac2 0x45>, <&dmac2 0x44>;
+ dma-names = "tx", "rx", "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof3: spi@e6c10000 {
+ compatible = "renesas,msiof-r8a77970",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c10000 0 0x0064>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 208>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 208>;
+ dmas = <&dmac1 0x47>, <&dmac1 0x46>,
+ <&dmac2 0x47>, <&dmac2 0x46>;
+ dma-names = "tx", "rx", "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
vin0: video@e6ef0000 {
compatible = "renesas,vin-r8a77970";
reg = <0 0xe6ef0000 0 0x1000>;
@@ -983,6 +1175,25 @@
};
};
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&thermal>;
+
+ trips {
+ cpu-crit {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
index fe2e2c0..5a7012b 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -15,7 +15,7 @@
aliases {
serial0 = &scif0;
- ethernet0 = &avb;
+ ethernet0 = &gether;
};
chosen {
@@ -97,23 +97,6 @@
};
};
-&avb {
- pinctrl-0 = <&avb_pins>;
- pinctrl-names = "default";
-
- phy-mode = "rgmii-id";
- phy-handle = <&phy0>;
- renesas,no-ether-link;
- status = "okay";
-
- phy0: ethernet-phy@0 {
- rxc-skew-ps = <1500>;
- reg = <0>;
- interrupt-parent = <&gpio1>;
- interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
&canfd {
pinctrl-0 = <&canfd0_pins>;
pinctrl-names = "default";
@@ -139,6 +122,23 @@
clock-frequency = <32768>;
};
+&gether {
+ pinctrl-0 = <&gether_pins>;
+ pinctrl-names = "default";
+
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy0>;
+ renesas,no-ether-link;
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
&i2c0 {
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
@@ -236,16 +236,17 @@
};
&pfc {
- avb_pins: avb {
- groups = "avb_mdio", "avb_rgmii";
- function = "avb";
- };
-
canfd0_pins: canfd0 {
groups = "canfd0_data_a";
function = "canfd0";
};
+ gether_pins: gether {
+ groups = "gether_mdio_a", "gether_rgmii",
+ "gether_txcrefclk", "gether_txcrefclk_mega";
+ function = "gether";
+ };
+
i2c0_pins: i2c0 {
groups = "i2c0";
function = "i2c0";
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index d4952b52..5bd9b25 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -330,6 +330,19 @@
#power-domain-cells = <1>;
};
+ tsc: thermal@e6198000 {
+ compatible = "renesas,r8a77980-thermal";
+ reg = <0 0xe6198000 0 0x100>,
+ <0 0xe61a0000 0 0x100>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
+ #thermal-sensor-cells = <1>;
+ };
+
intc_ex: interrupt-controller@e61c0000 {
compatible = "renesas,intc-ex-r8a77980", "renesas,irqc";
#interrupt-cells = <2>;
@@ -346,6 +359,71 @@
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a77980", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@e6fc0000 {
+ compatible = "renesas,tmu-r8a77980", "renesas,tmu";
+ reg = <0 0xe6fc0000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 124>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
+ status = "disabled";
+ };
+
+ tmu2: timer@e6fd0000 {
+ compatible = "renesas,tmu-r8a77980", "renesas,tmu";
+ reg = <0 0xe6fd0000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 123>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 123>;
+ status = "disabled";
+ };
+
+ tmu3: timer@e6fe0000 {
+ compatible = "renesas,tmu-r8a77980", "renesas,tmu";
+ reg = <0 0xe6fe0000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu4: timer@ffc00000 {
+ compatible = "renesas,tmu-r8a77980", "renesas,tmu";
+ reg = <0 0xffc00000 0 0x30>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
i2c0: i2c@e6500000 {
compatible = "renesas,i2c-r8a77980",
"renesas,rcar-gen3-i2c";
@@ -589,11 +667,62 @@
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
+ iommus = <&ipmmu_ds1 33>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
+ pwm0: pwm@e6e30000 {
+ compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 0x10>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@e6e31000 {
+ compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 0x10>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@e6e32000 {
+ compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 0x10>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@e6e33000 {
+ compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 0x10>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@e6e34000 {
+ compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 0x10>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ status = "disabled";
+ };
+
scif0: serial@e6e60000 {
compatible = "renesas,scif-r8a77980",
"renesas,rcar-gen3-scif",
@@ -677,6 +806,58 @@
status = "disabled";
};
+ msiof0: spi@e6e90000 {
+ compatible = "renesas,msiof-r8a77980",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6e90000 0 0x64>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 211>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 211>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6ea0000 {
+ compatible = "renesas,msiof-r8a77980",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6ea0000 0 0x0064>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 210>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 210>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6c00000 {
+ compatible = "renesas,msiof-r8a77980",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c00000 0 0x0064>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 209>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 209>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof3: spi@e6c10000 {
+ compatible = "renesas,msiof-r8a77980",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c10000 0 0x0064>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 208>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 208>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
vin0: video@e6ef0000 {
compatible = "renesas,vin-r8a77980";
reg = <0 0xe6ef0000 0 0x1000>;
@@ -1354,6 +1535,46 @@
};
};
+ thermal-zones {
+ thermal-sensor-1 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 0>;
+
+ trips {
+ sensor1-passive {
+ temperature = <95000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ sensor1-critical {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ thermal-sensor-2 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 1>;
+
+ trips {
+ sensor2-passive {
+ temperature = <95000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ sensor2-critical {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index f342dd8..62bdddc 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -29,6 +29,16 @@
reg = <0x0 0x48000000 0x0 0x38000000>;
};
+ audio_clkout: audio-clkout {
+ /*
+ * This is same as <&rcar_sound 0>
+ * but needed to avoid cs2000/rcar_sound probe dead-lock
+ */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ };
+
cvbs-in {
compatible = "composite-video-connector";
label = "CVBS IN";
@@ -119,6 +129,15 @@
};
};
+ reg_1p8v: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
reg_3p3v: regulator1 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
@@ -128,11 +147,100 @@
regulator-always-on;
};
+ vbus0_usb2: regulator-vbus0-usb2 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB20_VBUS_CN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ rsnd_ak4613: sound {
+ compatible = "simple-scu-audio-card";
+
+ simple-audio-card,name = "rsnd-ak4613";
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&sndcpu>;
+ simple-audio-card,frame-master = <&sndcpu>;
+
+ simple-audio-card,prefix = "ak4613";
+ simple-audio-card,routing = "ak4613 Playback", "DAI0 Playback",
+ "DAI0 Capture", "ak4613 Capture";
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&ak4613>;
+ };
+ };
+
+ x12_clk: x12 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
x13_clk: x13 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <74250000>;
};
+
+ vcc_sdhi0: regulator-vcc-sdhi0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+
+ vcc_sdhi1: regulator-vcc-sdhi1 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI1 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi1: regulator-vccq-sdhi1 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI1 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+};
+
+&audio_clk_a {
+ clock-frequency = <22579200>;
};
&avb {
@@ -152,6 +260,16 @@
};
};
+&canfd {
+ pinctrl-0 = <&canfd0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ channel0 {
+ status = "okay";
+ };
+};
+
&csi40 {
status = "okay";
@@ -188,6 +306,7 @@
};
&ehci0 {
+ dr_mode = "otg";
status = "okay";
};
@@ -195,6 +314,11 @@
clock-frequency = <48000000>;
};
+&hsusb {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
@@ -270,6 +394,37 @@
};
};
+&i2c3 {
+ status = "okay";
+
+ ak4613: codec@10 {
+ compatible = "asahi-kasei,ak4613";
+ #sound-dai-cells = <0>;
+ reg = <0x10>;
+ clocks = <&rcar_sound 3>;
+
+ asahi-kasei,in1-single-end;
+ asahi-kasei,in2-single-end;
+ asahi-kasei,out1-single-end;
+ asahi-kasei,out2-single-end;
+ asahi-kasei,out3-single-end;
+ asahi-kasei,out4-single-end;
+ asahi-kasei,out5-single-end;
+ asahi-kasei,out6-single-end;
+ };
+
+ cs2000: clk-multiplier@4f {
+ #clock-cells = <0>;
+ compatible = "cirrus,cs2000-cp";
+ reg = <0x4f>;
+ clocks = <&audio_clkout>, <&x12_clk>;
+ clock-names = "clk_in", "ref_clk";
+
+ assigned-clocks = <&cs2000>;
+ assigned-clock-rates = <24576000>; /* 1/1 divide */
+ };
+};
+
&lvds0 {
status = "okay";
@@ -295,6 +450,15 @@
};
&ohci0 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&pcie_bus_clk {
+ clock-frequency = <100000000>;
+};
+
+&pciec0 {
status = "okay";
};
@@ -306,6 +470,11 @@
};
};
+ canfd0_pins: canfd0 {
+ groups = "canfd0_data";
+ function = "canfd0";
+ };
+
du_pins: du {
groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
function = "du";
@@ -321,8 +490,54 @@
function = "pwm5";
};
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ sdhi0_pins_uhs: sd0_uhs {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <1800>;
+ };
+
+ sdhi1_pins: sd1 {
+ groups = "sdhi1_data4", "sdhi1_ctrl";
+ function = "sdhi1";
+ power-source = <3300>;
+ };
+
+ sdhi1_pins_uhs: sd1_uhs {
+ groups = "sdhi1_data4", "sdhi1_ctrl";
+ function = "sdhi1";
+ power-source = <1800>;
+ };
+
+ sdhi3_pins: sd3 {
+ groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
+ function = "sdhi3";
+ power-source = <1800>;
+ };
+
+ sound_pins: sound {
+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
+ function = "ssi";
+ };
+
+ sound_clk_pins: sound_clk {
+ groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a",
+ "audio_clkout_a", "audio_clkout1_a";
+ function = "audio_clk";
+ };
+
+ scif2_pins: scif2 {
+ groups = "scif2_data_a";
+ function = "scif2";
+ };
+
usb0_pins: usb {
- groups = "usb0_b";
+ groups = "usb0_b", "usb0_id";
function = "usb0";
};
@@ -346,19 +561,73 @@
status = "okay";
};
+&rcar_sound {
+ pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-names = "default";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ /* audio_clkout0/1/2/3 */
+ #clock-cells = <1>;
+ clock-frequency = <12288000 11289600>;
+ clkout-lr-synchronous;
+
+ status = "okay";
+
+ /* update <audio_clk_b> to <cs2000> */
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&cs2000>, <&audio_clk_c>,
+ <&cpg CPG_CORE R8A77990_CLK_ZA2>;
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0 &src0 &dvc0>;
+ capture = <&ssi1 &src1 &dvc1>;
+ };
+ };
+
+};
+
&rwdt {
timeout-sec = <60>;
status = "okay";
};
&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
status = "okay";
};
+&ssi1 {
+ shared-pin;
+};
+
&usb2_phy0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
+ vbus-supply = <&vbus0_usb2>;
+ status = "okay";
+};
+
+&usb3_peri0 {
+ companion = <&xhci0>;
status = "okay";
};
@@ -372,3 +641,46 @@
status = "okay";
};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdhi1 {
+ pinctrl-0 = <&sdhi1_pins>;
+ pinctrl-1 = <&sdhi1_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi1>;
+ vqmmc-supply = <&vccq_sdhi1>;
+ cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdhi3 {
+ /* used for on-board 8bit eMMC */
+ pinctrl-0 = <&sdhi3_pins>;
+ pinctrl-1 = <&sdhi3_pins>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ mmc-hs200-1_8v;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 9509dc0..b2f606e 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -25,6 +25,36 @@
i2c7 = &i2c7;
};
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency
+ * clocks by default.
+ * Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ /* External CAN clock - to be overridden by boards that provide it */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -62,6 +92,13 @@
clock-frequency = <0>;
};
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
pmu_a53 {
compatible = "arm,cortex-a53-pmu";
interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
@@ -213,6 +250,9 @@
clocks = <&cpg CPG_MOD 931>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 931>;
+ dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+ <&dmac2 0x91>, <&dmac2 0x90>;
+ dma-names = "tx", "rx", "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -227,6 +267,9 @@
clocks = <&cpg CPG_MOD 930>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 930>;
+ dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+ <&dmac2 0x93>, <&dmac2 0x92>;
+ dma-names = "tx", "rx", "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -241,6 +284,9 @@
clocks = <&cpg CPG_MOD 929>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 929>;
+ dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+ <&dmac2 0x95>, <&dmac2 0x94>;
+ dma-names = "tx", "rx", "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -255,6 +301,8 @@
clocks = <&cpg CPG_MOD 928>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 928>;
+ dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -269,6 +317,8 @@
clocks = <&cpg CPG_MOD 927>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 927>;
+ dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -283,6 +333,8 @@
clocks = <&cpg CPG_MOD 919>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 919>;
+ dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -297,6 +349,8 @@
clocks = <&cpg CPG_MOD 918>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 918>;
+ dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -320,6 +374,20 @@
reg = <0 0xe6060000 0 0x508>;
};
+ i2c_dvfs: i2c@e60b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a77990";
+ reg = <0 0xe60b0000 0 0x15>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 926>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 926>;
+ dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a77990-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
@@ -341,6 +409,167 @@
#power-domain-cells = <1>;
};
+ thermal: thermal@e6190000 {
+ compatible = "renesas,thermal-r8a77990";
+ reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ intc_ex: interrupt-controller@e61c0000 {
+ compatible = "renesas,intc-ex-r8a77990", "renesas,irqc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0 0xe61c0000 0 0x200>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 407>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 407>;
+ };
+
+ hscif0: serial@e6540000 {
+ compatible = "renesas,hscif-r8a77990",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6540000 0 0x60>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 520>,
+ <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+ <&dmac2 0x31>, <&dmac2 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 520>;
+ status = "disabled";
+ };
+
+ hscif1: serial@e6550000 {
+ compatible = "renesas,hscif-r8a77990",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6550000 0 0x60>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 519>,
+ <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+ <&dmac2 0x33>, <&dmac2 0x32>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 519>;
+ status = "disabled";
+ };
+
+ hscif2: serial@e6560000 {
+ compatible = "renesas,hscif-r8a77990",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6560000 0 0x60>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 518>,
+ <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+ <&dmac2 0x35>, <&dmac2 0x34>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 518>;
+ status = "disabled";
+ };
+
+ hscif3: serial@e66a0000 {
+ compatible = "renesas,hscif-r8a77990",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe66a0000 0 0x60>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 517>,
+ <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 517>;
+ status = "disabled";
+ };
+
+ hscif4: serial@e66b0000 {
+ compatible = "renesas,hscif-r8a77990",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe66b0000 0 0x60>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 516>,
+ <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 516>;
+ status = "disabled";
+ };
+
+ hsusb: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a77990",
+ "renesas,rcar-gen3-usbhs";
+ reg = <0 0xe6590000 0 0x200>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+ <&usb_dmac1 0>, <&usb_dmac1 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
+ renesas,buswait = <11>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 704>, <&cpg 703>;
+ status = "disabled";
+ };
+
+ usb_dmac0: dma-controller@e65a0000 {
+ compatible = "renesas,r8a77990-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65a0000 0 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 330>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 330>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb_dmac1: dma-controller@e65b0000 {
+ compatible = "renesas,r8a77990-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65b0000 0 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 331>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 331>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a77990",
"renesas,rcar-dmac";
@@ -588,11 +817,69 @@
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
+ iommus = <&ipmmu_ds0 16>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
+ can0: can@e6c30000 {
+ compatible = "renesas,can-r8a77990",
+ "renesas,rcar-gen3-can";
+ reg = <0 0xe6c30000 0 0x1000>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 916>,
+ <&cpg CPG_CORE R8A77990_CLK_CANFD>,
+ <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
+ assigned-clocks = <&cpg CPG_CORE R8A77990_CLK_CANFD>;
+ assigned-clock-rates = <40000000>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
+ status = "disabled";
+ };
+
+ can1: can@e6c38000 {
+ compatible = "renesas,can-r8a77990",
+ "renesas,rcar-gen3-can";
+ reg = <0 0xe6c38000 0 0x1000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 915>,
+ <&cpg CPG_CORE R8A77990_CLK_CANFD>,
+ <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
+ assigned-clocks = <&cpg CPG_CORE R8A77990_CLK_CANFD>;
+ assigned-clock-rates = <40000000>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
+ status = "disabled";
+ };
+
+ canfd: can@e66c0000 {
+ compatible = "renesas,r8a77990-canfd",
+ "renesas,rcar-gen3-canfd";
+ reg = <0 0xe66c0000 0 0x8000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 914>,
+ <&cpg CPG_CORE R8A77990_CLK_CANFD>,
+ <&can_clk>;
+ clock-names = "fck", "canfd", "can_clk";
+ assigned-clocks = <&cpg CPG_CORE R8A77990_CLK_CANFD>;
+ assigned-clock-rates = <40000000>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 914>;
+ status = "disabled";
+
+ channel0 {
+ status = "disabled";
+ };
+
+ channel1 {
+ status = "disabled";
+ };
+ };
+
pwm0: pwm@e6e30000 {
compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
reg = <0 0xe6e30000 0 0x8>;
@@ -663,6 +950,40 @@
status = "disabled";
};
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a77990",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e60000 0 64>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 207>,
+ <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+ <&dmac2 0x51>, <&dmac2 0x50>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 207>;
+ status = "disabled";
+ };
+
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a77990",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e68000 0 64>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 206>,
+ <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+ <&dmac2 0x53>, <&dmac2 0x52>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 206>;
+ status = "disabled";
+ };
+
scif2: serial@e6e88000 {
compatible = "renesas,scif-r8a77990",
"renesas,rcar-gen3-scif", "renesas,scif";
@@ -678,12 +999,64 @@
status = "disabled";
};
+ scif3: serial@e6c50000 {
+ compatible = "renesas,scif-r8a77990",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6c50000 0 64>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 204>,
+ <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 204>;
+ status = "disabled";
+ };
+
+ scif4: serial@e6c40000 {
+ compatible = "renesas,scif-r8a77990",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6c40000 0 64>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 203>,
+ <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 203>;
+ status = "disabled";
+ };
+
+ scif5: serial@e6f30000 {
+ compatible = "renesas,scif-r8a77990",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6f30000 0 64>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 202>,
+ <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+ <&dmac2 0x5b>, <&dmac2 0x5a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 202>;
+ status = "disabled";
+ };
+
msiof0: spi@e6e90000 {
compatible = "renesas,msiof-r8a77990",
"renesas,rcar-gen3-msiof";
reg = <0 0xe6e90000 0 0x0064>;
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 211>;
+ dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+ <&dmac2 0x41>, <&dmac2 0x40>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 211>;
#address-cells = <1>;
@@ -697,6 +1070,9 @@
reg = <0 0xe6ea0000 0 0x0064>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 210>;
+ dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+ <&dmac2 0x43>, <&dmac2 0x42>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 210>;
#address-cells = <1>;
@@ -710,6 +1086,8 @@
reg = <0 0xe6c00000 0 0x0064>;
interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 209>;
+ dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+ dma-names = "tx", "rx";
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 209>;
#address-cells = <1>;
@@ -723,6 +1101,8 @@
reg = <0 0xe6c10000 0 0x0064>;
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 208>;
+ dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+ dma-names = "tx", "rx";
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 208>;
#address-cells = <1>;
@@ -745,9 +1125,13 @@
#size-cells = <0>;
port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
reg = <1>;
- vin4csi40: endpoint {
+ vin4csi40: endpoint@2 {
+ reg = <2>;
remote-endpoint= <&csi40vin4>;
};
};
@@ -769,15 +1153,267 @@
#size-cells = <0>;
port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
reg = <1>;
- vin5csi40: endpoint {
+ vin5csi40: endpoint@2 {
+ reg = <2>;
remote-endpoint= <&csi40vin5>;
};
};
};
};
+ rcar_sound: sound@ec500000 {
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
+ /*
+ * #clock-cells is required for audio_clkout0/1/2/3
+ *
+ * clkout : #clock-cells = <0>; <&rcar_sound>;
+ * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>;
+ */
+ compatible = "renesas,rcar_sound-r8a77990", "renesas,rcar_sound-gen3";
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&audio_clk_b>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE R8A77990_CLK_ZA2>;
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0",
+ "src.9", "src.8", "src.7", "src.6",
+ "src.5", "src.4", "src.3", "src.2",
+ "src.1", "src.0",
+ "mix.1", "mix.0",
+ "ctu.1", "ctu.0",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b", "clk_c", "clk_i";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 1005>,
+ <&cpg 1006>, <&cpg 1007>,
+ <&cpg 1008>, <&cpg 1009>,
+ <&cpg 1010>, <&cpg 1011>,
+ <&cpg 1012>, <&cpg 1013>,
+ <&cpg 1014>, <&cpg 1015>;
+ reset-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0";
+ status = "disabled";
+
+ rcar_sound,dvc {
+ dvc0: dvc-0 {
+ dmas = <&audma0 0xbc>;
+ dma-names = "tx";
+ };
+ dvc1: dvc-1 {
+ dmas = <&audma0 0xbe>;
+ dma-names = "tx";
+ };
+ };
+
+ rcar_sound,mix {
+ mix0: mix-0 { };
+ mix1: mix-1 { };
+ };
+
+ rcar_sound,ctu {
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
+ };
+
+ rcar_sound,src {
+ src0: src-0 {
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x85>, <&audma0 0x9a>;
+ dma-names = "rx", "tx";
+ };
+ src1: src-1 {
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x87>, <&audma0 0x9c>;
+ dma-names = "rx", "tx";
+ };
+ src2: src-2 {
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x89>, <&audma0 0x9e>;
+ dma-names = "rx", "tx";
+ };
+ src3: src-3 {
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8b>, <&audma0 0xa0>;
+ dma-names = "rx", "tx";
+ };
+ src4: src-4 {
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8d>, <&audma0 0xb0>;
+ dma-names = "rx", "tx";
+ };
+ src5: src-5 {
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+ dma-names = "rx", "tx";
+ };
+ src6: src-6 {
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x91>, <&audma0 0xb4>;
+ dma-names = "rx", "tx";
+ };
+ src7: src-7 {
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x93>, <&audma0 0xb6>;
+ dma-names = "rx", "tx";
+ };
+ src8: src-8 {
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x95>, <&audma0 0xb8>;
+ dma-names = "rx", "tx";
+ };
+ src9: src-9 {
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x97>, <&audma0 0xba>;
+ dma-names = "rx", "tx";
+ };
+ };
+
+ rcar_sound,ssi {
+ ssi0: ssi-0 {
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x01>, <&audma0 0x02>,
+ <&audma0 0x15>, <&audma0 0x16>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi1: ssi-1 {
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x03>, <&audma0 0x04>,
+ <&audma0 0x49>, <&audma0 0x4a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi2: ssi-2 {
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x05>, <&audma0 0x06>,
+ <&audma0 0x63>, <&audma0 0x64>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi3: ssi-3 {
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x07>, <&audma0 0x08>,
+ <&audma0 0x6f>, <&audma0 0x70>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi4: ssi-4 {
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x09>, <&audma0 0x0a>,
+ <&audma0 0x71>, <&audma0 0x72>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi5: ssi-5 {
+ interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0b>, <&audma0 0x0c>,
+ <&audma0 0x73>, <&audma0 0x74>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi6: ssi-6 {
+ interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0d>, <&audma0 0x0e>,
+ <&audma0 0x75>, <&audma0 0x76>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi7: ssi-7 {
+ interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0f>, <&audma0 0x10>,
+ <&audma0 0x79>, <&audma0 0x7a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi8: ssi-8 {
+ interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x11>, <&audma0 0x12>,
+ <&audma0 0x7b>, <&audma0 0x7c>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi9: ssi-9 {
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x13>, <&audma0 0x14>,
+ <&audma0 0x7d>, <&audma0 0x7e>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ };
+ };
+
+ audma0: dma-controller@ec700000 {
+ compatible = "renesas,dmac-r8a77990",
+ "renesas,rcar-dmac";
+ reg = <0 0xec700000 0 0x10000>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 502>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 502>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+ <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+ <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+ <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+ <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+ <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+ <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+ <&ipmmu_mp 14>, <&ipmmu_mp 15>;
+ };
+
xhci0: usb@ee000000 {
compatible = "renesas,xhci-r8a77990",
"renesas,rcar-gen3-xhci";
@@ -789,6 +1425,17 @@
status = "disabled";
};
+ usb3_peri0: usb@ee020000 {
+ compatible = "renesas,r8a77990-usb3-peri",
+ "renesas,rcar-gen3-usb3-peri";
+ reg = <0 0xee020000 0 0x400>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 328>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 328>;
+ status = "disabled";
+ };
+
ohci0: usb@ee080000 {
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
@@ -826,6 +1473,42 @@
status = "disabled";
};
+ sdhi0: sd@ee100000 {
+ compatible = "renesas,sdhi-r8a77990",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee100000 0 0x2000>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 314>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
+ status = "disabled";
+ };
+
+ sdhi1: sd@ee120000 {
+ compatible = "renesas,sdhi-r8a77990",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee120000 0 0x2000>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 313>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 313>;
+ status = "disabled";
+ };
+
+ sdhi3: sd@ee160000 {
+ compatible = "renesas,sdhi-r8a77990",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee160000 0 0x2000>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 311>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 311>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -1041,12 +1724,58 @@
};
};
+ pciec0: pcie@fe000000 {
+ compatible = "renesas,pcie-r8a77990",
+ "renesas,pcie-rcar-gen3";
+ reg = <0 0xfe000000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+ 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+ 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+ 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ /* Map all possible DDR as inbound ranges */
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+ clock-names = "pcie", "pcie_bus";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 319>;
+ status = "disabled";
+ };
+
prr: chipid@fff00044 {
compatible = "renesas,prr";
reg = <0 0xfff00044 0 4>;
};
};
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&thermal>;
+
+ trips {
+ cpu-crit {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index 2405eaa..52d044b 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -24,6 +24,17 @@
stdout-path = "serial0:115200n8";
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 50000>;
+
+ brightness-levels = <256 128 64 16 8 4 0>;
+ default-brightness-level = <6>;
+
+ power-supply = <®_12p0v>;
+ enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+ };
+
composite-in {
compatible = "composite-video-connector";
@@ -104,6 +115,15 @@
regulator-always-on;
};
+ reg_12p0v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "D12.0V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
vga {
compatible = "vga-connector";
@@ -179,6 +199,7 @@
};
&ehci0 {
+ dr_mode = "host";
status = "okay";
};
@@ -186,6 +207,11 @@
clock-frequency = <48000000>;
};
+&hsusb {
+ dr_mode = "host";
+ status = "okay";
+};
+
&i2c0 {
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
@@ -337,6 +363,7 @@
};
&ohci0 {
+ dr_mode = "host";
status = "okay";
};
@@ -445,6 +472,7 @@
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
+ renesas,no-otg-pins;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index 214f495..8530d9f 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -344,6 +344,51 @@
status = "disabled";
};
+ hsusb: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a77995",
+ "renesas,rcar-gen3-usbhs";
+ reg = <0 0xe6590000 0 0x200>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+ <&usb_dmac1 0>, <&usb_dmac1 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
+ renesas,buswait = <11>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 704>, <&cpg 703>;
+ status = "disabled";
+ };
+
+ usb_dmac0: dma-controller@e65a0000 {
+ compatible = "renesas,r8a77995-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65a0000 0 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 330>;
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 330>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb_dmac1: dma-controller@e65b0000 {
+ compatible = "renesas,r8a77995-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65b0000 0 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 331>;
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 331>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
canfd: can@e66c0000 {
compatible = "renesas,r8a77995-canfd",
"renesas,rcar-gen3-canfd";
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 7f91ff5..f66d990 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -607,12 +607,6 @@
sdhi2_pins: sd2 {
groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
function = "sdhi2";
- power-source = <3300>;
- };
-
- sdhi2_pins_uhs: sd2_uhs {
- groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
- function = "sdhi2";
power-source = <1800>;
};
@@ -707,7 +701,10 @@
<&cpg CPG_CORE CPG_AUDIO_CLK_I>;
ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
rsnd_port0: port@0 {
+ reg = <0>;
rsnd_endpoint0: endpoint {
remote-endpoint = <&ak4613_endpoint>;
@@ -760,7 +757,7 @@
&sdhi2 {
/* used for on-board 8bit eMMC */
pinctrl-0 = <&sdhi2_pins>;
- pinctrl-1 = <&sdhi2_pins_uhs>;
+ pinctrl-1 = <&sdhi2_pins>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <®_3p3v>;
@@ -814,6 +811,8 @@
phys = <&usb3_phy0>;
phy-names = "usb";
+ companion = <&xhci0>;
+
status = "okay";
};
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index 89daca7..de694fd 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -332,12 +332,6 @@
sdhi2_pins: sd2 {
groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
function = "sdhi2";
- power-source = <3300>;
- };
-
- sdhi2_pins_uhs: sd2_uhs {
- groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
- function = "sdhi2";
power-source = <1800>;
};
@@ -426,7 +420,7 @@
&sdhi2 {
/* used for on-board 8bit eMMC */
pinctrl-0 = <&sdhi2_pins>;
- pinctrl-1 = <&sdhi2_pins_uhs>;
+ pinctrl-1 = <&sdhi2_pins>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <®_3p3v>;
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 49042c4..de0c406 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -14,6 +14,8 @@
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-inx.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-kd.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index dc20145..bd937d6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -100,6 +100,7 @@
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
+ mmc-hs200-1_8v;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index e1a33dd..ecd7f19 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -479,7 +479,10 @@
cooling-maps {
map0 {
trip = <&target>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
contribution = <4096>;
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index 9c24de1b..7014d10 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -426,12 +426,18 @@
map0 {
trip = <&cpu_alert0>;
cooling-device =
- <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu_alert1>;
cooling-device =
- <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
@@ -459,7 +465,10 @@
map0 {
trip = <&gpu_alert0>;
cooling-device =
- <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
index ff81dfd..c400be6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -194,14 +194,6 @@
backlight: backlight {
compatible = "pwm-backlight";
- brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
- 17 18 19 20 21 22 23 24 25 26 27 28 29 30
- 31 32 33 34 35 36 37 38 39 40 41 42 43 44
- 45 46 47 48 49 50 51 52 53 54 55 56 57 58
- 59 60 61 62 63 64 65 66 67 68 69 70 71 72
- 73 74 75 76 77 78 79 80 81 82 83 84 85 86
- 87 88 89 90 91 92 93 94 95 96 97 98 99 100>;
- default-brightness-level = <51>;
enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
power-supply = <&pp3300_disp>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
index 2cc7c47..81e7310 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
@@ -118,13 +118,17 @@
map0 {
trip = <&ppvar_bigcpu_alert>;
cooling-device =
- <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
contribution = <4096>;
};
map1 {
trip = <&ppvar_bigcpu_alert>;
cooling-device =
- <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
contribution = <1024>;
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dts
new file mode 100644
index 0000000..2d721a9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-Scarlet Rev4+ (SKU-6/Innolux) board device tree source
+ *
+ * Copyright 2018 Google, Inc
+ */
+
+/dts-v1/;
+
+#include "rk3399-gru-scarlet.dtsi"
+
+/ {
+ model = "Google Scarlet";
+ compatible = "google,scarlet-rev15-sku6", "google,scarlet-rev15",
+ "google,scarlet-rev14-sku6", "google,scarlet-rev14",
+ "google,scarlet-rev13-sku6", "google,scarlet-rev13",
+ "google,scarlet-rev12-sku6", "google,scarlet-rev12",
+ "google,scarlet-rev11-sku6", "google,scarlet-rev11",
+ "google,scarlet-rev10-sku6", "google,scarlet-rev10",
+ "google,scarlet-rev9-sku6", "google,scarlet-rev9",
+ "google,scarlet-rev8-sku6", "google,scarlet-rev8",
+ "google,scarlet-rev7-sku6", "google,scarlet-rev7",
+ "google,scarlet-rev6-sku6", "google,scarlet-rev6",
+ "google,scarlet-rev5-sku6", "google,scarlet-rev5",
+ "google,scarlet-rev4-sku6", "google,scarlet-rev4",
+ "google,scarlet", "google,gru", "rockchip,rk3399";
+};
+
+&mipi_panel {
+ compatible = "innolux,p097pfg";
+ avdd-supply = <&ppvarp_lcd>;
+ avee-supply = <&ppvarn_lcd>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-kd.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-kd.dts
new file mode 100644
index 0000000..bd75922
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-kd.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-Scarlet Rev3+ (SKU-7/Kingdisplay) board device tree source
+ *
+ * Copyright 2018 Google, Inc
+ */
+
+/dts-v1/;
+
+#include "rk3399-gru-scarlet.dtsi"
+
+/ {
+ model = "Google Scarlet";
+ compatible = "google,scarlet-rev15-sku7", "google,scarlet-rev15",
+ "google,scarlet-rev14-sku7", "google,scarlet-rev14",
+ "google,scarlet-rev13-sku7", "google,scarlet-rev13",
+ "google,scarlet-rev12-sku7", "google,scarlet-rev12",
+ "google,scarlet-rev11-sku7", "google,scarlet-rev11",
+ "google,scarlet-rev10-sku7", "google,scarlet-rev10",
+ "google,scarlet-rev9-sku7", "google,scarlet-rev9",
+ "google,scarlet-rev8-sku7", "google,scarlet-rev8",
+ "google,scarlet-rev7-sku7", "google,scarlet-rev7",
+ "google,scarlet-rev6-sku7", "google,scarlet-rev6",
+ "google,scarlet-rev5-sku7", "google,scarlet-rev5",
+ "google,scarlet-rev4-sku7", "google,scarlet-rev4",
+ "google,scarlet-rev3-sku7", "google,scarlet-rev3",
+ "google,scarlet", "google,gru", "rockchip,rk3399";
+};
+
+&mipi_panel {
+ compatible = "kingdisplay,kd097d04";
+ power-supply = <&pp3300_s0>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
new file mode 100644
index 0000000..fc50b3e
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -0,0 +1,594 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-scarlet board device tree source
+ *
+ * Copyright 2018 Google, Inc
+ */
+
+#include "rk3399-gru.dtsi"
+
+/{
+ /* Power tree */
+
+ /* ppvar_sys children, sorted by name */
+ pp1250_s3: pp1250-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "pp1250_s3";
+
+ /* EC turns on w/ pp1250_s3_en; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+
+ vin-supply = <&ppvar_sys>;
+ };
+
+ pp1250_cam: pp1250-dvdd {
+ compatible = "regulator-fixed";
+ regulator-name = "pp1250_dvdd";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pp1250_cam_en>;
+
+ enable-active-high;
+ gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+
+ /* 740us delay from gpio output high to pp1250 stable,
+ * rounding up to 1ms for safety.
+ */
+ startup-delay-us = <1000>;
+ vin-supply = <&pp1250_s3>;
+ };
+
+ pp900_s0: pp900-s0 {
+ compatible = "regulator-fixed";
+ regulator-name = "pp900_s0";
+
+ /* EC turns on w/ pp900_s0_en; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ vin-supply = <&ppvar_sys>;
+ };
+
+ ppvarn_lcd: ppvarn-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "ppvarn_lcd";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ppvarn_lcd_en>;
+
+ enable-active-high;
+ gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&ppvar_sys>;
+ };
+
+ ppvarp_lcd: ppvarp-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "ppvarp_lcd";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ppvarp_lcd_en>;
+
+ enable-active-high;
+ gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&ppvar_sys>;
+ };
+
+ /* pp1800 children, sorted by name */
+ pp900_s3: pp900-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "pp900_s3";
+
+ /* EC turns on w/ pp900_s3_en; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ vin-supply = <&pp1800>;
+ };
+
+ /* EC turns on pp1800_s3_en */
+ pp1800_s3: pp1800 {
+ };
+
+ /* pp3300 children, sorted by name */
+ pp2800_cam: pp2800-avdd {
+ compatible = "regulator-fixed";
+ regulator-name = "pp2800_avdd";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pp2800_cam_en>;
+
+ enable-active-high;
+ gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <100>;
+ vin-supply = <&pp3300>;
+ };
+
+ /* EC turns on pp3300_s0_en */
+ pp3300_s0: pp3300 {
+ };
+
+ /* EC turns on pp3300_s3_en */
+ pp3300_s3: pp3300 {
+ };
+
+ /*
+ * See b/66922012
+ *
+ * This is a hack to make sure the Bluetooth part of the QCA6174A
+ * is reset at boot by toggling BT_EN. At boot BT_EN is first set
+ * to low when the bt_3v3 regulator is registered (in disabled
+ * state). The fake regulator is configured as a supply of the
+ * wlan_3v3 regulator below. When wlan_3v3 is enabled early in
+ * the boot process it also enables its supply regulator bt_3v3,
+ * which changes BT_EN to high.
+ */
+ bt_3v3: bt-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "bt_3v3";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_en_1v8_l>;
+
+ enable-active-high;
+ gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&pp3300_s3>;
+ };
+
+ wlan_3v3: wlan-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan_3v3";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_pd_1v8_l>;
+
+ /*
+ * The WL_EN pin is driven low when the regulator is
+ * registered, and transitions to high when the PCIe bus
+ * is powered up.
+ */
+ enable-active-high;
+ gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+
+ /*
+ * Require minimum 10ms from power-on (e.g., PD#) to init PCIe.
+ * TODO (b/64444991): how long to assert PD#?
+ */
+ regulator-enable-ramp-delay = <10000>;
+ /* See bt_3v3 hack above */
+ vin-supply = <&bt_3v3>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ enable-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bl_en>;
+ pwms = <&pwm1 0 1000000 0>;
+ pwm-delay-us = <10000>;
+ };
+
+ dmic: dmic {
+ compatible = "dmic-codec";
+ dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dmic_en>;
+ wakeup-delay-ms = <250>;
+ };
+};
+
+/* pp900_s0 aliases */
+pp900_ddrpll_ap: &pp900_s0 {
+};
+pp900_pcie: &pp900_s0 {
+};
+pp900_usb: &pp900_s0 {
+};
+
+/* pp900_s3 aliases */
+pp900_emmcpll: &pp900_s3 {
+};
+
+/* EC turns on; alias for pp1800_s0 */
+pp1800_pcie: &pp1800_s0 {
+};
+
+/* On scarlet PPVAR(big_cpu, lit_cpu, gpu) need to adjust voltage ranges */
+&ppvar_bigcpu {
+ ctrl-voltage-range = <800074 1299226>;
+ regulator-min-microvolt = <800074>;
+ regulator-max-microvolt = <1299226>;
+};
+
+&ppvar_bigcpu_pwm {
+ /* On scarlet ppvar big cpu use pwm3 */
+ pwms = <&pwm3 0 3337 0>;
+ regulator-min-microvolt = <800074>;
+ regulator-max-microvolt = <1299226>;
+};
+
+&ppvar_litcpu {
+ ctrl-voltage-range = <802122 1199620>;
+ regulator-min-microvolt = <802122>;
+ regulator-max-microvolt = <1199620>;
+};
+
+&ppvar_litcpu_pwm {
+ regulator-min-microvolt = <802122>;
+ regulator-max-microvolt = <1199620>;
+};
+
+&ppvar_gpu {
+ ctrl-voltage-range = <799600 1099600>;
+ regulator-min-microvolt = <799600>;
+ regulator-max-microvolt = <1099600>;
+};
+
+&ppvar_gpu_pwm {
+ regulator-min-microvolt = <799600>;
+ regulator-max-microvolt = <1099600>;
+};
+
+&ppvar_sd_card_io {
+ states = <1800000 0x0 3300000 0x1>;
+ regulator-max-microvolt = <3300000>;
+};
+
+&pp3000_sd_slot {
+ vin-supply = <&pp3300>;
+};
+
+ap_i2c_dig: &i2c2 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ /* These are relatively safe rise/fall times. */
+ i2c-scl-falling-time-ns = <50>;
+ i2c-scl-rising-time-ns = <300>;
+
+ digitizer: digitizer@9 {
+ compatible = "hid-over-i2c";
+ reg = <0x9>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ hid-descr-addr = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pen_int_odl &pen_reset_l>;
+ };
+};
+
+&ap_i2c_ts {
+ touchscreen: touchscreen@10 {
+ compatible = "elan,ekth3500";
+ reg = <0x10>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_int_l &touch_reset_l>;
+ reset-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+};
+
+camera: &i2c7 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ /* These are relatively safe rise/fall times; TODO: measure */
+ i2c-scl-falling-time-ns = <50>;
+ i2c-scl-rising-time-ns = <300>;
+
+ /* 24M mclk is shared between world and user cameras */
+ pinctrl-0 = <&i2c7_xfer &test_clkout1>;
+};
+
+&cdn_dp {
+ extcon = <&usbc_extcon0>;
+ phys = <&tcphy0_dp>;
+};
+
+&cpu_alert0 {
+ temperature = <66000>;
+};
+
+&cpu_alert1 {
+ temperature = <71000>;
+};
+
+&cros_ec {
+ interrupt-parent = <&gpio1>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&cru {
+ assigned-clocks =
+ <&cru PLL_GPLL>, <&cru PLL_CPLL>,
+ <&cru PLL_NPLL>,
+ <&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
+ <&cru PCLK_PERIHP>,
+ <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
+ <&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
+ <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
+ <&cru ACLK_VIO>,
+ <&cru ACLK_GIC_PRE>,
+ <&cru PCLK_DDR>,
+ <&cru ACLK_HDCP>;
+ assigned-clock-rates =
+ <600000000>, <1600000000>,
+ <1000000000>,
+ <150000000>, <75000000>,
+ <37500000>,
+ <100000000>, <100000000>,
+ <50000000>, <800000000>,
+ <100000000>, <50000000>,
+ <400000000>,
+ <200000000>,
+ <200000000>,
+ <400000000>;
+};
+
+&gpio_keys {
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l>, <&pen_eject_odl>;
+
+ pen-insert {
+ label = "Pen Insert";
+ /* Insert = low, eject = high */
+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ linux,code = <SW_PEN_INSERTED>;
+ linux,input-type = <EV_SW>;
+ wakeup-source;
+ };
+};
+
+&i2c_tunnel {
+ google,remote-bus = <0>;
+};
+
+&io_domains {
+ bt656-supply = <&pp1800_s0>; /* APIO2_VDD; 2a 2b */
+ audio-supply = <&pp1800_s0>; /* APIO5_VDD; 3d 4a */
+ gpio1830-supply = <&pp1800_s0>; /* APIO4_VDD; 4c 4d */
+};
+
+&max98357a {
+ sdmode-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+};
+
+&mipi_dsi {
+ status = "okay";
+ clock-master;
+
+ ports {
+ mipi_out: port@1 {
+ reg = <1>;
+
+ mipi_out_panel: endpoint {
+ remote-endpoint = <&mipi_in_panel>;
+ };
+ };
+ };
+
+ mipi_panel: panel@0 {
+ /* 2 different panels are used, compatibles are in dts files */
+ reg = <0>;
+ backlight = <&backlight>;
+ enable-gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&display_rst_l>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mipi1_in_panel: endpoint@1 {
+ remote-endpoint = <&mipi1_out_panel>;
+ };
+ };
+ };
+ };
+};
+
+&mipi_dsi1 {
+ status = "okay";
+
+ ports {
+ mipi1_out: port@1 {
+ reg = <1>;
+
+ mipi1_out_panel: endpoint {
+ remote-endpoint = <&mipi1_in_panel>;
+ };
+ };
+ };
+};
+
+&pcie0 {
+ ep-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+
+ /* PERST# asserted in S3 */
+ pcie-reset-suspend = <1>;
+
+ vpcie3v3-supply = <&wlan_3v3>;
+ vpcie1v8-supply = <&pp1800_pcie>;
+};
+
+&sdmmc {
+ cd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+ rockchip,codec = <&max98357a &dmic &codec &cdn_dp>;
+};
+
+&spi2 {
+ status = "okay";
+};
+
+&wake_on_bt {
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+};
+
+/* PINCTRL OVERRIDES */
+&ec_ap_int_l {
+ rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>;
+};
+
+&ap_fw_wp {
+ rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_none>;
+};
+
+&bl_en {
+ rockchip,pins = <4 21 RK_FUNC_GPIO &pcfg_pull_none>;
+};
+
+&bt_host_wake_l {
+ rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_up>;
+};
+
+&ec_ap_int_l {
+ rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>;
+};
+
+&headset_int_l {
+ rockchip,pins = <1 23 RK_FUNC_GPIO &pcfg_pull_up>;
+};
+
+&i2s0_8ch_bus {
+ rockchip,pins =
+ <3 24 RK_FUNC_1 &pcfg_pull_none_6ma>,
+ <3 25 RK_FUNC_1 &pcfg_pull_none_6ma>,
+ <3 26 RK_FUNC_1 &pcfg_pull_none_6ma>,
+ <3 27 RK_FUNC_1 &pcfg_pull_none_6ma>,
+ <3 31 RK_FUNC_1 &pcfg_pull_none_6ma>,
+ <4 0 RK_FUNC_1 &pcfg_pull_none_6ma>;
+};
+
+/* there is no external pull up, so need to set this pin pull up */
+&sdmmc_cd_gpio {
+ rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_up>;
+};
+
+&sd_pwr_1800_sel {
+ rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_up>;
+};
+
+&sdmode_en {
+ rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_down>;
+};
+
+&touch_reset_l {
+ rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_down>;
+};
+
+&touch_int_l {
+ rockchip,pins = <1 4 RK_FUNC_GPIO &pcfg_pull_down>;
+};
+
+&pinctrl {
+ pinctrl-0 = <
+ &ap_pwroff /* AP will auto-assert this when in S3 */
+ &clk_32k /* This pin is always 32k on gru boards */
+ &wlan_rf_kill_1v8_l
+ >;
+
+ pcfg_pull_none_6ma: pcfg-pull-none-6ma {
+ bias-disable;
+ drive-strength = <6>;
+ };
+
+ camera {
+ pp1250_cam_en: pp1250-dvdd {
+ rockchip,pins = <2 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pp2800_cam_en: pp2800-avdd {
+ rockchip,pins = <2 24 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ ucam_rst: ucam_rst {
+ rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wcam_rst: wcam_rst {
+ rockchip,pins = <2 5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ digitizer {
+ pen_int_odl: pen-int-odl {
+ rockchip,pins = <1 0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ pen_reset_l: pen-reset-l {
+ rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ discrete-regulators {
+ display_rst_l: display-rst-l {
+ rockchip,pins = <4 25 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ ppvarp_lcd_en: ppvarp-lcd-en {
+ rockchip,pins = <4 27 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ ppvarn_lcd_en: ppvarn-lcd-en {
+ rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ dmic {
+ dmic_en: dmic-en {
+ rockchip,pins = <4 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pen {
+ pen_eject_odl: pen-eject-odl {
+ rockchip,pins = <1 1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ tpm {
+ h1_int_od_l: h1-int-od-l {
+ rockchip,pins = <1 17 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&wifi {
+ bt_en_1v8_l: bt-en-1v8-l {
+ rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wlan_pd_1v8_l: wlan-pd-1v8-l {
+ rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ /* Default pull-up, but just to be clear */
+ wlan_rf_kill_1v8_l: wlan-rf-kill-1v8-l {
+ rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ wifi_perst_l: wifi-perst-l {
+ rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wlan_host_wake_l: wlan-host-wake-l {
+ rockchip,pins = <1 3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
index fef2c06..0b8f1ed 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -42,6 +42,47 @@
};
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7
+ 8 9 10 11 12 13 14 15
+ 16 17 18 19 20 21 22 23
+ 24 25 26 27 28 29 30 31
+ 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47
+ 48 49 50 51 52 53 54 55
+ 56 57 58 59 60 61 62 63
+ 64 65 66 67 68 69 70 71
+ 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87
+ 88 89 90 91 92 93 94 95
+ 96 97 98 99 100 101 102 103
+ 104 105 106 107 108 109 110 111
+ 112 113 114 115 116 117 118 119
+ 120 121 122 123 124 125 126 127
+ 128 129 130 131 132 133 134 135
+ 136 137 138 139 140 141 142 143
+ 144 145 146 147 148 149 150 151
+ 152 153 154 155 156 157 158 159
+ 160 161 162 163 164 165 166 167
+ 168 169 170 171 172 173 174 175
+ 176 177 178 179 180 181 182 183
+ 184 185 186 187 188 189 190 191
+ 192 193 194 195 196 197 198 199
+ 200 201 202 203 204 205 206 207
+ 208 209 210 211 212 213 214 215
+ 216 217 218 219 220 221 222 223
+ 224 225 226 227 228 229 230 231
+ 232 233 234 235 236 237 238 239
+ 240 241 242 243 244 245 246 247
+ 248 249 250 251 252 253 254 255>;
+ default-brightness-level = <200>;
+ enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+ pwms = <&pwm0 0 25000 0>;
+ status = "okay";
+ };
+
edp_panel: edp-panel {
compatible ="lg,lp079qx1-sp0v", "simple-panel";
backlight = <&backlight>;
@@ -95,11 +136,6 @@
};
};
-&backlight {
- enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
&edp {
status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index 5421e23..946d358 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -11,43 +11,8 @@
/ {
compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399";
- backlight: backlight {
- compatible = "pwm-backlight";
- brightness-levels = <
- 0 1 2 3 4 5 6 7
- 8 9 10 11 12 13 14 15
- 16 17 18 19 20 21 22 23
- 24 25 26 27 28 29 30 31
- 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47
- 48 49 50 51 52 53 54 55
- 56 57 58 59 60 61 62 63
- 64 65 66 67 68 69 70 71
- 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87
- 88 89 90 91 92 93 94 95
- 96 97 98 99 100 101 102 103
- 104 105 106 107 108 109 110 111
- 112 113 114 115 116 117 118 119
- 120 121 122 123 124 125 126 127
- 128 129 130 131 132 133 134 135
- 136 137 138 139 140 141 142 143
- 144 145 146 147 148 149 150 151
- 152 153 154 155 156 157 158 159
- 160 161 162 163 164 165 166 167
- 168 169 170 171 172 173 174 175
- 176 177 178 179 180 181 182 183
- 184 185 186 187 188 189 190 191
- 192 193 194 195 196 197 198 199
- 200 201 202 203 204 205 206 207
- 208 209 210 211 212 213 214 215
- 216 217 218 219 220 221 222 223
- 224 225 226 227 228 229 230 231
- 232 233 234 235 236 237 238 239
- 240 241 242 243 244 245 246 247
- 248 249 250 251 252 253 254 255>;
- default-brightness-level = <200>;
- pwms = <&pwm0 0 25000 0>;
+ chosen {
+ stdout-path = "serial2:1500000n8";
};
clkin_gmac: external-gmac-clock {
@@ -66,6 +31,19 @@
regulator-max-microvolt = <12000000>;
};
+ /*
+ * The fan power supply comes from the baseboard.
+ * For the standalone Sapphire one option is to connect a wire
+ * from R90030 DNP R0805 pin2 to C90002 10uF C0805 pin1 (vcc_sys).
+ */
+ fan0: gpio-fan {
+ #cooling-cells = <2>;
+ compatible = "gpio-fan";
+ gpio-fan,speed-map = <0 0 3000 1>;
+ gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
keys: gpio-keys {
compatible = "gpio-keys";
autorepeat;
@@ -183,6 +161,24 @@
cpu-supply = <&vdd_cpu_b>;
};
+&cpu_thermal {
+ trips {
+ cpu_hot: cpu_hot {
+ hysteresis = <10000>;
+ temperature = <55000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map2 {
+ cooling-device =
+ <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ trip = <&cpu_hot>;
+ };
+ };
+};
+
&emmc_phy {
status = "okay";
};
@@ -472,6 +468,13 @@
};
};
+ fan {
+ motor_pwr: motor-pwr {
+ rockchip,pins =
+ <RK_GPIO1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins =
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 99e7f65..5bd7356 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -681,6 +681,8 @@
clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
clock-names = "spiclk", "apb_pclk";
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dmac_peri 10>, <&dmac_peri 11>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
#address-cells = <1>;
@@ -694,6 +696,8 @@
clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
clock-names = "spiclk", "apb_pclk";
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dmac_peri 12>, <&dmac_peri 13>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
#address-cells = <1>;
@@ -707,6 +711,8 @@
clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
clock-names = "spiclk", "apb_pclk";
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dmac_peri 14>, <&dmac_peri 15>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
#address-cells = <1>;
@@ -720,6 +726,8 @@
clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>;
clock-names = "spiclk", "apb_pclk";
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dmac_peri 18>, <&dmac_peri 19>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>;
#address-cells = <1>;
@@ -733,6 +741,8 @@
clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>;
clock-names = "spiclk", "apb_pclk";
interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dmac_bus 8>, <&dmac_bus 9>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>;
power-domains = <&power RK3399_PD_SDIOAUDIO>;
@@ -770,13 +780,18 @@
map0 {
trip = <&cpu_alert0>;
cooling-device =
- <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu_alert1>;
cooling-device =
<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
@@ -804,7 +819,8 @@
map0 {
trip = <&gpu_alert0>;
cooling-device =
- <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
diff --git a/arch/arm64/boot/dts/sprd/sc9836.dtsi b/arch/arm64/boot/dts/sprd/sc9836.dtsi
index 63894c4..4bcdbb7 100644
--- a/arch/arm64/boot/dts/sprd/sc9836.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9836.dtsi
@@ -50,10 +50,11 @@
reg = <0 0x10003000 0 0x1000>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etf_in: endpoint {
- slave-mode;
- remote-endpoint = <&funnel_out_port0>;
+ in-ports {
+ port {
+ etf_in: endpoint {
+ remote-endpoint = <&funnel_out_port0>;
+ };
};
};
};
@@ -63,55 +64,50 @@
reg = <0 0x10001000 0 0x1000>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel_out_port0: endpoint {
remote-endpoint = <&etf_in>;
};
};
+ };
- /* funnel input port 0-4 */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port@5 {
+ port@4 {
reg = <4>;
funnel_in_port4: endpoint {
- slave-mode;
remote-endpoint = <&stm_out>;
};
};
@@ -126,9 +122,11 @@
cpu = <&cpu0>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etm0_out: endpoint {
- remote-endpoint = <&funnel_in_port0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
};
};
};
@@ -140,9 +138,11 @@
cpu = <&cpu1>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etm1_out: endpoint {
- remote-endpoint = <&funnel_in_port1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
};
};
};
@@ -154,9 +154,11 @@
cpu = <&cpu2>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etm2_out: endpoint {
- remote-endpoint = <&funnel_in_port2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel_in_port2>;
+ };
};
};
};
@@ -168,9 +170,11 @@
cpu = <&cpu3>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etm3_out: endpoint {
- remote-endpoint = <&funnel_in_port3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel_in_port3>;
+ };
};
};
};
@@ -182,9 +186,11 @@
reg-names = "stm-base", "stm-stimulus-base";
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- stm_out: endpoint {
- remote-endpoint = <&funnel_in_port4>;
+ out-ports {
+ port {
+ stm_out: endpoint {
+ remote-endpoint = <&funnel_in_port4>;
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
index 48f5928..5f57bf0 100644
--- a/arch/arm64/boot/dts/sprd/sc9860.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
@@ -304,30 +304,29 @@
reg = <0 0x10001000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
+ port {
+ soc_funnel_out_port: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
+ };
+ };
+
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
- soc_funnel_out_port: endpoint {
- remote-endpoint = <&etb_in>;
- };
- };
-
- port@1 {
- reg = <0>;
soc_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint =
<&main_funnel_out_port>;
};
};
- port@2 {
+ port@4 {
reg = <4>;
soc_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint =
<&stm_out_port>;
};
@@ -340,11 +339,12 @@
reg = <0 0x10003000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint =
- <&soc_funnel_out_port>;
+ out-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint =
+ <&soc_funnel_out_port>;
+ };
};
};
};
@@ -356,10 +356,12 @@
reg-names = "stm-base", "stm-stimulus-base";
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- stm_out_port: endpoint {
- remote-endpoint =
- <&soc_funnel_in_port1>;
+ out-ports {
+ port {
+ stm_out_port: endpoint {
+ remote-endpoint =
+ <&soc_funnel_in_port1>;
+ };
};
};
};
@@ -369,38 +371,36 @@
reg = <0 0x11001000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
cluster0_funnel_out_port: endpoint {
remote-endpoint =
<&cluster0_etf_in>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
cluster0_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
cluster0_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
cluster0_funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
@@ -408,7 +408,6 @@
port@4 {
reg = <4>;
cluster0_funnel_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
@@ -420,46 +419,43 @@
reg = <0 0x11002000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
cluster1_funnel_out_port: endpoint {
remote-endpoint =
<&cluster1_etf_in>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
cluster1_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etm4_out>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
cluster1_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etm5_out>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
cluster1_funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&etm6_out>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
cluster1_funnel_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&etm7_out>;
};
};
@@ -472,22 +468,18 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
cluster0_etf_out: endpoint {
remote-endpoint =
<&main_funnel_in_port0>;
};
};
+ };
- port@1 {
- reg = <0>;
+ in-ports {
+ port {
cluster0_etf_in: endpoint {
- slave-mode;
remote-endpoint =
<&cluster0_funnel_out_port>;
};
@@ -501,22 +493,18 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
cluster1_etf_out: endpoint {
remote-endpoint =
<&main_funnel_in_port1>;
};
};
+ };
- port@1 {
- reg = <0>;
+ in-ports {
+ port {
cluster1_etf_in: endpoint {
- slave-mode;
remote-endpoint =
<&cluster1_funnel_out_port>;
};
@@ -530,31 +518,30 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
main_funnel_out_port: endpoint {
remote-endpoint =
<&soc_funnel_in_port0>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
main_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint =
<&cluster0_etf_out>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
main_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint =
<&cluster1_etf_out>;
};
@@ -569,10 +556,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm0_out: endpoint {
- remote-endpoint =
- <&cluster0_funnel_in_port0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port0>;
+ };
};
};
};
@@ -584,10 +573,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm1_out: endpoint {
- remote-endpoint =
- <&cluster0_funnel_in_port1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port1>;
+ };
};
};
};
@@ -599,10 +590,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm2_out: endpoint {
- remote-endpoint =
- <&cluster0_funnel_in_port2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port2>;
+ };
};
};
};
@@ -614,10 +607,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm3_out: endpoint {
- remote-endpoint =
- <&cluster0_funnel_in_port3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port3>;
+ };
};
};
};
@@ -629,10 +624,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm4_out: endpoint {
- remote-endpoint =
- <&cluster1_funnel_in_port0>;
+ out-ports {
+ port {
+ etm4_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port0>;
+ };
};
};
};
@@ -644,10 +641,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm5_out: endpoint {
- remote-endpoint =
- <&cluster1_funnel_in_port1>;
+ out-ports {
+ port {
+ etm5_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port1>;
+ };
};
};
};
@@ -659,10 +658,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm6_out: endpoint {
- remote-endpoint =
- <&cluster1_funnel_in_port2>;
+ out-ports {
+ port {
+ etm6_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port2>;
+ };
};
};
};
@@ -674,10 +675,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm7_out: endpoint {
- remote-endpoint =
- <&cluster1_funnel_in_port3>;
+ out-ports {
+ port {
+ etm7_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port3>;
+ };
};
};
};
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index 3e2091708..6b0d4df 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -24,6 +24,14 @@
#define KERNEL_DS UL(-1)
#define USER_DS (TASK_SIZE_64 - 1)
+/*
+ * On arm64 systems, unaligned accesses by the CPU are cheap, and so there is
+ * no point in shifting all network buffers by 2 bytes just to make some IP
+ * header fields appear aligned in memory, potentially sacrificing some DMA
+ * performance on some platforms.
+ */
+#define NET_IP_ALIGN 0
+
#ifndef __ASSEMBLY__
#ifdef __KERNEL__
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 9d9582c..9b432d9 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -483,8 +483,6 @@ void __init arm64_memblock_init(void)
high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
dma_contiguous_reserve(arm64_dma_phys_limit);
-
- memblock_allow_resize();
}
void __init bootmem_init(void)
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 394b8d55..d1d6601 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -659,6 +659,8 @@ void __init paging_init(void)
memblock_free(__pa_symbol(init_pg_dir),
__pa_symbol(init_pg_end) - __pa_symbol(init_pg_dir));
+
+ memblock_allow_resize();
}
/*
diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h
index 6181e41..fe3ddd7 100644
--- a/arch/m68k/include/asm/pgtable_mm.h
+++ b/arch/m68k/include/asm/pgtable_mm.h
@@ -55,12 +55,12 @@
*/
#ifdef CONFIG_SUN3
#define PTRS_PER_PTE 16
-#define __PAGETABLE_PMD_FOLDED
+#define __PAGETABLE_PMD_FOLDED 1
#define PTRS_PER_PMD 1
#define PTRS_PER_PGD 2048
#elif defined(CONFIG_COLDFIRE)
#define PTRS_PER_PTE 512
-#define __PAGETABLE_PMD_FOLDED
+#define __PAGETABLE_PMD_FOLDED 1
#define PTRS_PER_PMD 1
#define PTRS_PER_PGD 1024
#else
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index f64ebb9..e14b662 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -63,7 +63,7 @@ extern int mem_init_done;
#include <asm-generic/4level-fixup.h>
-#define __PAGETABLE_PMD_FOLDED
+#define __PAGETABLE_PMD_FOLDED 1
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c
index 75108ec..6c79e8a 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c
@@ -67,7 +67,7 @@ void (*cvmx_override_pko_queue_priority) (int pko_port,
void (*cvmx_override_ipd_port_setup) (int ipd_port);
/* Port count per interface */
-static int interface_port_count[5];
+static int interface_port_count[9];
/**
* Return the number of interfaces the chip has. Each interface
diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c
index e6c9485..cb38461 100644
--- a/arch/mips/mm/dma-noncoherent.c
+++ b/arch/mips/mm/dma-noncoherent.c
@@ -50,7 +50,7 @@ void *arch_dma_alloc(struct device *dev, size_t size,
void *ret;
ret = dma_direct_alloc_pages(dev, size, dma_handle, gfp, attrs);
- if (!ret && !(attrs & DMA_ATTR_NON_CONSISTENT)) {
+ if (ret && !(attrs & DMA_ATTR_NON_CONSISTENT)) {
dma_cache_wback_inv((unsigned long) ret, size);
ret = (void *)UNCAC_ADDR(ret);
}
diff --git a/arch/nds32/include/asm/pgtable.h b/arch/nds32/include/asm/pgtable.h
index d3e19a5..9f52db9 100644
--- a/arch/nds32/include/asm/pgtable.h
+++ b/arch/nds32/include/asm/pgtable.h
@@ -4,7 +4,7 @@
#ifndef _ASMNDS32_PGTABLE_H
#define _ASMNDS32_PGTABLE_H
-#define __PAGETABLE_PMD_FOLDED
+#define __PAGETABLE_PMD_FOLDED 1
#include <asm-generic/4level-fixup.h>
#include <asm-generic/sizes.h>
diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h
index b941ac7d..c7bb74e 100644
--- a/arch/parisc/include/asm/pgtable.h
+++ b/arch/parisc/include/asm/pgtable.h
@@ -111,7 +111,7 @@ static inline void purge_tlb_entries(struct mm_struct *mm, unsigned long addr)
#if CONFIG_PGTABLE_LEVELS == 3
#define BITS_PER_PMD (PAGE_SHIFT + PMD_ORDER - BITS_PER_PMD_ENTRY)
#else
-#define __PAGETABLE_PMD_FOLDED
+#define __PAGETABLE_PMD_FOLDED 1
#define BITS_PER_PMD 0
#endif
#define PTRS_PER_PMD (1UL << BITS_PER_PMD)
diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index 0b33577..e21053e 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -27,7 +27,7 @@
KBUILD_CFLAGS_DECOMPRESSOR += $(if $(CONFIG_DEBUG_INFO),-g)
KBUILD_CFLAGS_DECOMPRESSOR += $(if $(CONFIG_DEBUG_INFO_DWARF4), $(call cc-option, -gdwarf-4,))
UTS_MACHINE := s390x
-STACK_SIZE := $(if $(CONFIG_KASAN),32768,16384)
+STACK_SIZE := $(if $(CONFIG_KASAN),65536,16384)
CHECKFLAGS += -D__s390__ -D__s390x__
export LD_BFD
diff --git a/arch/s390/boot/compressed/Makefile b/arch/s390/boot/compressed/Makefile
index 5930396..b1bdd15 100644
--- a/arch/s390/boot/compressed/Makefile
+++ b/arch/s390/boot/compressed/Makefile
@@ -22,10 +22,10 @@
OBJECTS := $(addprefix $(obj)/,$(obj-y))
LDFLAGS_vmlinux := --oformat $(LD_BFD) -e startup -T
-$(obj)/vmlinux: $(obj)/vmlinux.lds $(objtree)/arch/s390/boot/startup.a $(OBJECTS)
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(objtree)/arch/s390/boot/startup.a $(OBJECTS) FORCE
$(call if_changed,ld)
-OBJCOPYFLAGS_info.bin := -O binary --only-section=.vmlinux.info
+OBJCOPYFLAGS_info.bin := -O binary --only-section=.vmlinux.info --set-section-flags .vmlinux.info=load
$(obj)/info.bin: vmlinux FORCE
$(call if_changed,objcopy)
@@ -46,17 +46,17 @@
suffix-$(CONFIG_KERNEL_LZO) := .lzo
suffix-$(CONFIG_KERNEL_XZ) := .xz
-$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
$(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE
$(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lz4: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.lz4: $(vmlinux.bin.all-y) FORCE
$(call if_changed,lz4)
-$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
$(call if_changed,lzma)
-$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE
$(call if_changed,lzo)
-$(obj)/vmlinux.bin.xz: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.xz: $(vmlinux.bin.all-y) FORCE
$(call if_changed,xzkern)
OBJCOPYFLAGS_piggy.o := -I binary -O elf64-s390 -B s390:64-bit --rename-section .data=.vmlinux.bin.compressed
diff --git a/arch/s390/configs/debug_defconfig b/arch/s390/configs/debug_defconfig
index 259d169..c69cb04 100644
--- a/arch/s390/configs/debug_defconfig
+++ b/arch/s390/configs/debug_defconfig
@@ -64,6 +64,8 @@
CONFIG_PREEMPT=y
CONFIG_HZ_100=y
CONFIG_KEXEC_FILE=y
+CONFIG_EXPOLINE=y
+CONFIG_EXPOLINE_AUTO=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_KSM=y
@@ -84,9 +86,11 @@
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_S390=y
CONFIG_CHSC_SCH=y
+CONFIG_VFIO_AP=m
CONFIG_CRASH_DUMP=y
CONFIG_BINFMT_MISC=m
CONFIG_HIBERNATION=y
+CONFIG_PM_DEBUG=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
@@ -161,8 +165,6 @@
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NF_TABLES=m
-CONFIG_NFT_EXTHDR=m
-CONFIG_NFT_META=m
CONFIG_NFT_CT=m
CONFIG_NFT_COUNTER=m
CONFIG_NFT_LOG=m
@@ -365,6 +367,8 @@
CONFIG_NET_ACT_CSUM=m
CONFIG_DNS_RESOLVER=y
CONFIG_OPENVSWITCH=m
+CONFIG_VSOCKETS=m
+CONFIG_VIRTIO_VSOCKETS=m
CONFIG_NETLINK_DIAG=m
CONFIG_CGROUP_NET_PRIO=y
CONFIG_BPF_JIT=y
@@ -461,6 +465,7 @@
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
+CONFIG_ISM=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
@@ -486,9 +491,12 @@
CONFIG_MLX5_INFINIBAND=m
CONFIG_VFIO=m
CONFIG_VFIO_PCI=m
+CONFIG_VFIO_MDEV=m
+CONFIG_VFIO_MDEV_DEVICE=m
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_INPUT=y
+CONFIG_S390_AP_IOMMU=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
@@ -615,7 +623,6 @@
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=300
CONFIG_NOTIFIER_ERROR_INJECTION=m
-CONFIG_PM_NOTIFIER_ERROR_INJECT=m
CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=m
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
@@ -727,3 +734,4 @@
CONFIG_KVM=m
CONFIG_KVM_S390_UCONTROL=y
CONFIG_VHOST_NET=m
+CONFIG_VHOST_VSOCK=m
diff --git a/arch/s390/configs/performance_defconfig b/arch/s390/configs/performance_defconfig
index 37fd60c..32f539d 100644
--- a/arch/s390/configs/performance_defconfig
+++ b/arch/s390/configs/performance_defconfig
@@ -65,6 +65,8 @@
CONFIG_NUMA=y
CONFIG_HZ_100=y
CONFIG_KEXEC_FILE=y
+CONFIG_EXPOLINE=y
+CONFIG_EXPOLINE_AUTO=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_KSM=y
@@ -82,9 +84,11 @@
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_S390=y
CONFIG_CHSC_SCH=y
+CONFIG_VFIO_AP=m
CONFIG_CRASH_DUMP=y
CONFIG_BINFMT_MISC=m
CONFIG_HIBERNATION=y
+CONFIG_PM_DEBUG=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
@@ -159,8 +163,6 @@
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NF_TABLES=m
-CONFIG_NFT_EXTHDR=m
-CONFIG_NFT_META=m
CONFIG_NFT_CT=m
CONFIG_NFT_COUNTER=m
CONFIG_NFT_LOG=m
@@ -362,6 +364,8 @@
CONFIG_NET_ACT_CSUM=m
CONFIG_DNS_RESOLVER=y
CONFIG_OPENVSWITCH=m
+CONFIG_VSOCKETS=m
+CONFIG_VIRTIO_VSOCKETS=m
CONFIG_NETLINK_DIAG=m
CONFIG_CGROUP_NET_PRIO=y
CONFIG_BPF_JIT=y
@@ -458,6 +462,7 @@
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
+CONFIG_ISM=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
@@ -483,9 +488,12 @@
CONFIG_MLX5_INFINIBAND=m
CONFIG_VFIO=m
CONFIG_VFIO_PCI=m
+CONFIG_VFIO_MDEV=m
+CONFIG_VFIO_MDEV_DEVICE=m
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_INPUT=y
+CONFIG_S390_AP_IOMMU=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
@@ -666,3 +674,4 @@
CONFIG_KVM=m
CONFIG_KVM_S390_UCONTROL=y
CONFIG_VHOST_NET=m
+CONFIG_VHOST_VSOCK=m
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index 7cb6a52..4d58a92 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -26,14 +26,23 @@
CONFIG_CGROUP_PERF=y
CONFIG_NAMESPACES=y
CONFIG_USER_NS=y
+CONFIG_CHECKPOINT_RESTORE=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
# CONFIG_SYSFS_SYSCALL is not set
-CONFIG_CHECKPOINT_RESTORE=y
CONFIG_BPF_SYSCALL=y
CONFIG_USERFAULTFD=y
# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
+CONFIG_LIVEPATCH=y
+CONFIG_NR_CPUS=256
+CONFIG_NUMA=y
+CONFIG_HZ_100=y
+CONFIG_KEXEC_FILE=y
+CONFIG_CRASH_DUMP=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_DEBUG=y
+CONFIG_CMM=m
CONFIG_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
@@ -44,11 +53,7 @@
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
CONFIG_DEFAULT_DEADLINE=y
-CONFIG_LIVEPATCH=y
-CONFIG_NR_CPUS=256
-CONFIG_NUMA=y
-CONFIG_HZ_100=y
-CONFIG_KEXEC_FILE=y
+CONFIG_BINFMT_MISC=m
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_KSM=y
@@ -60,9 +65,6 @@
CONFIG_ZSMALLOC=m
CONFIG_ZSMALLOC_STAT=y
CONFIG_IDLE_PAGE_TRACKING=y
-CONFIG_CRASH_DUMP=y
-CONFIG_BINFMT_MISC=m
-CONFIG_HIBERNATION=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -98,6 +100,7 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_VIRTIO_BLK=y
CONFIG_SCSI=y
+# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
@@ -131,6 +134,7 @@
CONFIG_TUN=m
CONFIG_VIRTIO_NET=y
# CONFIG_NET_VENDOR_ALACRITECH is not set
+# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_VENDOR_CORTINA is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SOCIONEXT is not set
@@ -157,33 +161,6 @@
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_INFO_DWARF4=y
-CONFIG_GDB_SCRIPTS=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_SECTION_MISMATCH=y
-CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_PAGEALLOC=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_PANIC_ON_OOPS=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_LOCK_STAT=y
-CONFIG_DEBUG_LOCKDEP=y
-CONFIG_DEBUG_ATOMIC_SLEEP=y
-CONFIG_DEBUG_LIST=y
-CONFIG_DEBUG_SG=y
-CONFIG_DEBUG_NOTIFIERS=y
-CONFIG_RCU_CPU_STALL_TIMEOUT=60
-CONFIG_LATENCYTOP=y
-CONFIG_SCHED_TRACER=y
-CONFIG_FTRACE_SYSCALLS=y
-CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
-CONFIG_STACK_TRACER=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_FUNCTION_PROFILER=y
-# CONFIG_RUNTIME_TESTING_MENU is not set
-CONFIG_S390_PTDUMP=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
@@ -193,6 +170,7 @@
CONFIG_CRYPTO_CFB=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_OFB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_CMAC=m
@@ -231,7 +209,6 @@
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_ZCRYPT=m
-CONFIG_ZCRYPT_MULTIDEVNODES=y
CONFIG_PKEY=m
CONFIG_CRYPTO_PAES_S390=m
CONFIG_CRYPTO_SHA1_S390=m
@@ -247,4 +224,30 @@
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
-CONFIG_CMM=m
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF4=y
+CONFIG_GDB_SCRIPTS=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_PAGEALLOC=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_PANIC_ON_OOPS=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCK_STAT=y
+CONFIG_DEBUG_LOCKDEP=y
+CONFIG_DEBUG_ATOMIC_SLEEP=y
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_SG=y
+CONFIG_DEBUG_NOTIFIERS=y
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+CONFIG_LATENCYTOP=y
+CONFIG_SCHED_TRACER=y
+CONFIG_FTRACE_SYSCALLS=y
+CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
+CONFIG_STACK_TRACER=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_FUNCTION_PROFILER=y
+# CONFIG_RUNTIME_TESTING_MENU is not set
+CONFIG_S390_PTDUMP=y
diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h
index dbd689d..ccbb53e 100644
--- a/arch/s390/include/asm/mmu_context.h
+++ b/arch/s390/include/asm/mmu_context.h
@@ -46,8 +46,6 @@ static inline int init_new_context(struct task_struct *tsk,
mm->context.asce_limit = STACK_TOP_MAX;
mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
_ASCE_USER_BITS | _ASCE_TYPE_REGION3;
- /* pgd_alloc() did not account this pud */
- mm_inc_nr_puds(mm);
break;
case -PAGE_SIZE:
/* forked 5-level task, set new asce with new_mm->pgd */
@@ -63,9 +61,6 @@ static inline int init_new_context(struct task_struct *tsk,
/* forked 2-level compat task, set new asce with new mm->pgd */
mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
_ASCE_USER_BITS | _ASCE_TYPE_SEGMENT;
- /* pgd_alloc() did not account this pmd */
- mm_inc_nr_pmds(mm);
- mm_inc_nr_puds(mm);
}
crst_table_init((unsigned long *) mm->pgd, pgd_entry_type(mm));
return 0;
diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h
index f0f9bcf..5ee7337 100644
--- a/arch/s390/include/asm/pgalloc.h
+++ b/arch/s390/include/asm/pgalloc.h
@@ -36,11 +36,11 @@ static inline void crst_table_init(unsigned long *crst, unsigned long entry)
static inline unsigned long pgd_entry_type(struct mm_struct *mm)
{
- if (mm->context.asce_limit <= _REGION3_SIZE)
+ if (mm_pmd_folded(mm))
return _SEGMENT_ENTRY_EMPTY;
- if (mm->context.asce_limit <= _REGION2_SIZE)
+ if (mm_pud_folded(mm))
return _REGION3_ENTRY_EMPTY;
- if (mm->context.asce_limit <= _REGION1_SIZE)
+ if (mm_p4d_folded(mm))
return _REGION2_ENTRY_EMPTY;
return _REGION1_ENTRY_EMPTY;
}
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 411d435..0637324 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -493,6 +493,24 @@ static inline int is_module_addr(void *addr)
_REGION_ENTRY_PROTECT | \
_REGION_ENTRY_NOEXEC)
+static inline bool mm_p4d_folded(struct mm_struct *mm)
+{
+ return mm->context.asce_limit <= _REGION1_SIZE;
+}
+#define mm_p4d_folded(mm) mm_p4d_folded(mm)
+
+static inline bool mm_pud_folded(struct mm_struct *mm)
+{
+ return mm->context.asce_limit <= _REGION2_SIZE;
+}
+#define mm_pud_folded(mm) mm_pud_folded(mm)
+
+static inline bool mm_pmd_folded(struct mm_struct *mm)
+{
+ return mm->context.asce_limit <= _REGION3_SIZE;
+}
+#define mm_pmd_folded(mm) mm_pmd_folded(mm)
+
static inline int mm_has_pgste(struct mm_struct *mm)
{
#ifdef CONFIG_PGSTE
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index 302795c..81038ab 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -236,7 +236,7 @@ static inline unsigned long current_stack_pointer(void)
return sp;
}
-static __no_sanitize_address_or_inline unsigned short stap(void)
+static __no_kasan_or_inline unsigned short stap(void)
{
unsigned short cpu_address;
@@ -330,7 +330,7 @@ static inline void __load_psw(psw_t psw)
* Set PSW mask to specified value, while leaving the
* PSW addr pointing to the next instruction.
*/
-static __no_sanitize_address_or_inline void __load_psw_mask(unsigned long mask)
+static __no_kasan_or_inline void __load_psw_mask(unsigned long mask)
{
unsigned long addr;
psw_t psw;
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index 27248f4..ce4e17c 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -14,7 +14,7 @@
* General size of kernel stacks
*/
#ifdef CONFIG_KASAN
-#define THREAD_SIZE_ORDER 3
+#define THREAD_SIZE_ORDER 4
#else
#define THREAD_SIZE_ORDER 2
#endif
diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h
index 457b7ba..b31c779 100644
--- a/arch/s390/include/asm/tlb.h
+++ b/arch/s390/include/asm/tlb.h
@@ -136,7 +136,7 @@ static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
unsigned long address)
{
- if (tlb->mm->context.asce_limit <= _REGION3_SIZE)
+ if (mm_pmd_folded(tlb->mm))
return;
pgtable_pmd_page_dtor(virt_to_page(pmd));
tlb_remove_table(tlb, pmd);
@@ -152,7 +152,7 @@ static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
static inline void p4d_free_tlb(struct mmu_gather *tlb, p4d_t *p4d,
unsigned long address)
{
- if (tlb->mm->context.asce_limit <= _REGION1_SIZE)
+ if (mm_p4d_folded(tlb->mm))
return;
tlb_remove_table(tlb, p4d);
}
@@ -167,7 +167,7 @@ static inline void p4d_free_tlb(struct mmu_gather *tlb, p4d_t *p4d,
static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud,
unsigned long address)
{
- if (tlb->mm->context.asce_limit <= _REGION2_SIZE)
+ if (mm_pud_folded(tlb->mm))
return;
tlb_remove_table(tlb, pud);
}
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 724fba4..39191a0 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -236,10 +236,10 @@
stmg %r6,%r15,__SF_GPRS(%r15) # store gprs of prev task
lghi %r4,__TASK_stack
lghi %r1,__TASK_thread
- lg %r5,0(%r4,%r3) # start of kernel stack of next
+ llill %r5,STACK_INIT
stg %r15,__THREAD_ksp(%r1,%r2) # store kernel stack of prev
- lgr %r15,%r5
- aghi %r15,STACK_INIT # end of kernel stack of next
+ lg %r15,0(%r4,%r3) # start of kernel stack of next
+ agr %r15,%r5 # end of kernel stack of next
stg %r3,__LC_CURRENT # store task struct of next
stg %r15,__LC_KERNEL_STACK # store end of kernel stack
lg %r15,__THREAD_ksp(%r1,%r3) # load kernel stack of next
diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c
index cc085e2..74091fd 100644
--- a/arch/s390/kernel/perf_cpum_cf.c
+++ b/arch/s390/kernel/perf_cpum_cf.c
@@ -373,7 +373,7 @@ static int __hw_perf_event_init(struct perf_event *event)
return -ENOENT;
if (ev > PERF_CPUM_CF_MAX_CTR)
- return -EINVAL;
+ return -ENOENT;
/* Obtain the counter set to which the specified counter belongs */
set = get_counter_set(ev);
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index 7bf604f..bfabeb1 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -1842,10 +1842,30 @@ static void cpumsf_pmu_del(struct perf_event *event, int flags)
CPUMF_EVENT_ATTR(SF, SF_CYCLES_BASIC, PERF_EVENT_CPUM_SF);
CPUMF_EVENT_ATTR(SF, SF_CYCLES_BASIC_DIAG, PERF_EVENT_CPUM_SF_DIAG);
-static struct attribute *cpumsf_pmu_events_attr[] = {
- CPUMF_EVENT_PTR(SF, SF_CYCLES_BASIC),
- NULL,
- NULL,
+/* Attribute list for CPU_SF.
+ *
+ * The availablitiy depends on the CPU_MF sampling facility authorization
+ * for basic + diagnositic samples. This is determined at initialization
+ * time by the sampling facility device driver.
+ * If the authorization for basic samples is turned off, it should be
+ * also turned off for diagnostic sampling.
+ *
+ * During initialization of the device driver, check the authorization
+ * level for diagnostic sampling and installs the attribute
+ * file for diagnostic sampling if necessary.
+ *
+ * For now install a placeholder to reference all possible attributes:
+ * SF_CYCLES_BASIC and SF_CYCLES_BASIC_DIAG.
+ * Add another entry for the final NULL pointer.
+ */
+enum {
+ SF_CYCLES_BASIC_ATTR_IDX = 0,
+ SF_CYCLES_BASIC_DIAG_ATTR_IDX,
+ SF_CYCLES_ATTR_MAX
+};
+
+static struct attribute *cpumsf_pmu_events_attr[SF_CYCLES_ATTR_MAX + 1] = {
+ [SF_CYCLES_BASIC_ATTR_IDX] = CPUMF_EVENT_PTR(SF, SF_CYCLES_BASIC)
};
PMU_FORMAT_ATTR(event, "config:0-63");
@@ -2040,7 +2060,10 @@ static int __init init_cpum_sampling_pmu(void)
if (si.ad) {
sfb_set_limits(CPUM_SF_MIN_SDB, CPUM_SF_MAX_SDB);
- cpumsf_pmu_events_attr[1] =
+ /* Sampling of diagnostic data authorized,
+ * install event into attribute list of PMU device.
+ */
+ cpumsf_pmu_events_attr[SF_CYCLES_BASIC_DIAG_ATTR_IDX] =
CPUMF_EVENT_PTR(SF, SF_CYCLES_BASIC_DIAG);
}
diff --git a/arch/s390/kernel/vdso32/Makefile b/arch/s390/kernel/vdso32/Makefile
index eb8aebe..e76309f 100644
--- a/arch/s390/kernel/vdso32/Makefile
+++ b/arch/s390/kernel/vdso32/Makefile
@@ -37,7 +37,7 @@
$(obj)/vdso32_wrapper.o : $(obj)/vdso32.so
# link rule for the .so file, .lds has to be first
-$(obj)/vdso32.so.dbg: $(src)/vdso32.lds $(obj-vdso32)
+$(obj)/vdso32.so.dbg: $(src)/vdso32.lds $(obj-vdso32) FORCE
$(call if_changed,vdso32ld)
# strip rule for the .so file
@@ -46,12 +46,12 @@
$(call if_changed,objcopy)
# assembly rules for the .S files
-$(obj-vdso32): %.o: %.S
+$(obj-vdso32): %.o: %.S FORCE
$(call if_changed_dep,vdso32as)
# actual build commands
quiet_cmd_vdso32ld = VDSO32L $@
- cmd_vdso32ld = $(CC) $(c_flags) -Wl,-T $^ -o $@
+ cmd_vdso32ld = $(CC) $(c_flags) -Wl,-T $(filter %.lds %.o,$^) -o $@
quiet_cmd_vdso32as = VDSO32A $@
cmd_vdso32as = $(CC) $(a_flags) -c -o $@ $<
diff --git a/arch/s390/kernel/vdso64/Makefile b/arch/s390/kernel/vdso64/Makefile
index a22b2cf..f849ac6 100644
--- a/arch/s390/kernel/vdso64/Makefile
+++ b/arch/s390/kernel/vdso64/Makefile
@@ -37,7 +37,7 @@
$(obj)/vdso64_wrapper.o : $(obj)/vdso64.so
# link rule for the .so file, .lds has to be first
-$(obj)/vdso64.so.dbg: $(src)/vdso64.lds $(obj-vdso64)
+$(obj)/vdso64.so.dbg: $(src)/vdso64.lds $(obj-vdso64) FORCE
$(call if_changed,vdso64ld)
# strip rule for the .so file
@@ -46,12 +46,12 @@
$(call if_changed,objcopy)
# assembly rules for the .S files
-$(obj-vdso64): %.o: %.S
+$(obj-vdso64): %.o: %.S FORCE
$(call if_changed_dep,vdso64as)
# actual build commands
quiet_cmd_vdso64ld = VDSO64L $@
- cmd_vdso64ld = $(CC) $(c_flags) -Wl,-T $^ -o $@
+ cmd_vdso64ld = $(CC) $(c_flags) -Wl,-T $(filter %.lds %.o,$^) -o $@
quiet_cmd_vdso64as = VDSO64A $@
cmd_vdso64as = $(CC) $(a_flags) -c -o $@ $<
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 21eb7407..8429ab0 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -154,14 +154,14 @@
* uncompressed image info used by the decompressor
* it should match struct vmlinux_info
*/
- .vmlinux.info 0 : {
+ .vmlinux.info 0 (INFO) : {
QUAD(_stext) /* default_lma */
QUAD(startup_continue) /* entry */
QUAD(__bss_start - _stext) /* image_size */
QUAD(__bss_stop - __bss_start) /* bss_size */
QUAD(__boot_data_start) /* bootdata_off */
QUAD(__boot_data_end - __boot_data_start) /* bootdata_size */
- }
+ } :NONE
/* Debugging sections. */
STABS_DEBUG
diff --git a/arch/s390/mm/pgalloc.c b/arch/s390/mm/pgalloc.c
index 76d89ee..814f265 100644
--- a/arch/s390/mm/pgalloc.c
+++ b/arch/s390/mm/pgalloc.c
@@ -101,6 +101,7 @@ int crst_table_upgrade(struct mm_struct *mm, unsigned long end)
mm->context.asce_limit = _REGION1_SIZE;
mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
_ASCE_USER_BITS | _ASCE_TYPE_REGION2;
+ mm_inc_nr_puds(mm);
} else {
crst_table_init(table, _REGION1_ENTRY_EMPTY);
pgd_populate(mm, (pgd_t *) table, (p4d_t *) pgd);
diff --git a/arch/s390/numa/numa.c b/arch/s390/numa/numa.c
index ae0d9e8..d31bde0 100644
--- a/arch/s390/numa/numa.c
+++ b/arch/s390/numa/numa.c
@@ -53,6 +53,7 @@ int __node_distance(int a, int b)
{
return mode->distance ? mode->distance(a, b) : 0;
}
+EXPORT_SYMBOL(__node_distance);
int numa_debug_enabled;
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 74c002d..28c40624 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -1305,6 +1305,7 @@ static int ubd_queue_one_vec(struct blk_mq_hw_ctx *hctx, struct request *req,
io_req->fds[0] = dev->cow.fd;
else
io_req->fds[0] = dev->fd;
+ io_req->error = 0;
if (req_op(req) == REQ_OP_FLUSH) {
io_req->op = UBD_FLUSH;
@@ -1313,9 +1314,7 @@ static int ubd_queue_one_vec(struct blk_mq_hw_ctx *hctx, struct request *req,
io_req->cow_offset = -1;
io_req->offset = off;
io_req->length = bvec->bv_len;
- io_req->error = 0;
io_req->sector_mask = 0;
-
io_req->op = rq_data_dir(req) == READ ? UBD_READ : UBD_WRITE;
io_req->offsets[0] = 0;
io_req->offsets[1] = dev->cow.data_offset;
@@ -1341,11 +1340,14 @@ static int ubd_queue_one_vec(struct blk_mq_hw_ctx *hctx, struct request *req,
static blk_status_t ubd_queue_rq(struct blk_mq_hw_ctx *hctx,
const struct blk_mq_queue_data *bd)
{
+ struct ubd *ubd_dev = hctx->queue->queuedata;
struct request *req = bd->rq;
int ret = 0;
blk_mq_start_request(req);
+ spin_lock_irq(&ubd_dev->lock);
+
if (req_op(req) == REQ_OP_FLUSH) {
ret = ubd_queue_one_vec(hctx, req, 0, NULL);
} else {
@@ -1361,9 +1363,11 @@ static blk_status_t ubd_queue_rq(struct blk_mq_hw_ctx *hctx,
}
}
out:
- if (ret < 0) {
+ spin_unlock_irq(&ubd_dev->lock);
+
+ if (ret < 0)
blk_mq_requeue_request(req, true);
- }
+
return BLK_STS_OK;
}
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index ba7e346..9d734f3 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -525,7 +525,6 @@
bool "ScaleMP vSMP"
select HYPERVISOR_GUEST
select PARAVIRT
- select PARAVIRT_XXL
depends on X86_64 && PCI
depends on X86_EXTENDED_PLATFORM
depends on SMP
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 5b562e4..88398fd 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -213,8 +213,6 @@
KBUILD_LDFLAGS += $(call ld-option, -z max-page-size=0x200000)
endif
-# Speed up the build
-KBUILD_CFLAGS += -pipe
# Workaround for a gcc prelease that unfortunately was shipped in a suse release
KBUILD_CFLAGS += -Wno-sign-compare
#
@@ -239,7 +237,7 @@
archmacros:
$(Q)$(MAKE) $(build)=arch/x86/kernel arch/x86/kernel/macros.s
-ASM_MACRO_FLAGS = -Wa,arch/x86/kernel/macros.s -Wa,-
+ASM_MACRO_FLAGS = -Wa,arch/x86/kernel/macros.s
export ASM_MACRO_FLAGS
KBUILD_CFLAGS += $(ASM_MACRO_FLAGS)
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 4da9b1c..c1a812b 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -221,6 +221,8 @@ static inline void mce_hygon_feature_init(struct cpuinfo_x86 *c) { return mce_am
int mce_available(struct cpuinfo_x86 *c);
bool mce_is_memory_error(struct mce *m);
+bool mce_is_correctable(struct mce *m);
+int mce_usable_address(struct mce *m);
DECLARE_PER_CPU(unsigned, mce_exception_count);
DECLARE_PER_CPU(unsigned, mce_poll_count);
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index 0d6271c..1d0a777 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -232,7 +232,7 @@ static inline u64 hv_do_fast_hypercall16(u16 code, u64 input1, u64 input2)
: "cc");
}
#endif
- return hv_status;
+ return hv_status;
}
/*
diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h
index cd0cf1c5..8f65728 100644
--- a/arch/x86/include/asm/page_64_types.h
+++ b/arch/x86/include/asm/page_64_types.h
@@ -33,12 +33,14 @@
/*
* Set __PAGE_OFFSET to the most negative possible address +
- * PGDIR_SIZE*16 (pgd slot 272). The gap is to allow a space for a
- * hypervisor to fit. Choosing 16 slots here is arbitrary, but it's
- * what Xen requires.
+ * PGDIR_SIZE*17 (pgd slot 273).
+ *
+ * The gap is to allow a space for LDT remap for PTI (1 pgd slot) and space for
+ * a hypervisor (16 slots). Choosing 16 slots for a hypervisor is arbitrary,
+ * but it's what Xen requires.
*/
-#define __PAGE_OFFSET_BASE_L5 _AC(0xff10000000000000, UL)
-#define __PAGE_OFFSET_BASE_L4 _AC(0xffff880000000000, UL)
+#define __PAGE_OFFSET_BASE_L5 _AC(0xff11000000000000, UL)
+#define __PAGE_OFFSET_BASE_L4 _AC(0xffff888000000000, UL)
#ifdef CONFIG_DYNAMIC_MEMORY_LAYOUT
#define __PAGE_OFFSET page_offset_base
diff --git a/arch/x86/include/asm/pgtable_64_types.h b/arch/x86/include/asm/pgtable_64_types.h
index 04edd2d..84bd9bd 100644
--- a/arch/x86/include/asm/pgtable_64_types.h
+++ b/arch/x86/include/asm/pgtable_64_types.h
@@ -111,9 +111,7 @@ extern unsigned int ptrs_per_p4d;
*/
#define MAXMEM (1UL << MAX_PHYSMEM_BITS)
-#define LDT_PGD_ENTRY_L4 -3UL
-#define LDT_PGD_ENTRY_L5 -112UL
-#define LDT_PGD_ENTRY (pgtable_l5_enabled() ? LDT_PGD_ENTRY_L5 : LDT_PGD_ENTRY_L4)
+#define LDT_PGD_ENTRY -240UL
#define LDT_BASE_ADDR (LDT_PGD_ENTRY << PGDIR_SHIFT)
#define LDT_END_ADDR (LDT_BASE_ADDR + PGDIR_SIZE)
diff --git a/arch/x86/include/asm/qspinlock.h b/arch/x86/include/asm/qspinlock.h
index 87623c6..bd5ac6c 100644
--- a/arch/x86/include/asm/qspinlock.h
+++ b/arch/x86/include/asm/qspinlock.h
@@ -13,12 +13,15 @@
#define queued_fetch_set_pending_acquire queued_fetch_set_pending_acquire
static __always_inline u32 queued_fetch_set_pending_acquire(struct qspinlock *lock)
{
- u32 val = 0;
+ u32 val;
- if (GEN_BINARY_RMWcc(LOCK_PREFIX "btsl", lock->val.counter, c,
- "I", _Q_PENDING_OFFSET))
- val |= _Q_PENDING_VAL;
-
+ /*
+ * We can't use GEN_BINARY_RMWcc() inside an if() stmt because asm goto
+ * and CONFIG_PROFILE_ALL_BRANCHES=y results in a label inside a
+ * statement expression, which GCC doesn't like.
+ */
+ val = GEN_BINARY_RMWcc(LOCK_PREFIX "btsl", lock->val.counter, c,
+ "I", _Q_PENDING_OFFSET) * _Q_PENDING_VAL;
val |= atomic_read(&lock->val) & ~_Q_PENDING_MASK;
return val;
diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h
index 123e669..790ce08 100644
--- a/arch/x86/include/asm/xen/page.h
+++ b/arch/x86/include/asm/xen/page.h
@@ -9,7 +9,7 @@
#include <linux/mm.h>
#include <linux/device.h>
-#include <linux/uaccess.h>
+#include <asm/extable.h>
#include <asm/page.h>
#include <asm/pgtable.h>
@@ -93,12 +93,39 @@ clear_foreign_p2m_mapping(struct gnttab_unmap_grant_ref *unmap_ops,
*/
static inline int xen_safe_write_ulong(unsigned long *addr, unsigned long val)
{
- return __put_user(val, (unsigned long __user *)addr);
+ int ret = 0;
+
+ asm volatile("1: mov %[val], %[ptr]\n"
+ "2:\n"
+ ".section .fixup, \"ax\"\n"
+ "3: sub $1, %[ret]\n"
+ " jmp 2b\n"
+ ".previous\n"
+ _ASM_EXTABLE(1b, 3b)
+ : [ret] "+r" (ret), [ptr] "=m" (*addr)
+ : [val] "r" (val));
+
+ return ret;
}
-static inline int xen_safe_read_ulong(unsigned long *addr, unsigned long *val)
+static inline int xen_safe_read_ulong(const unsigned long *addr,
+ unsigned long *val)
{
- return __get_user(*val, (unsigned long __user *)addr);
+ int ret = 0;
+ unsigned long rval = ~0ul;
+
+ asm volatile("1: mov %[ptr], %[rval]\n"
+ "2:\n"
+ ".section .fixup, \"ax\"\n"
+ "3: sub $1, %[ret]\n"
+ " jmp 2b\n"
+ ".previous\n"
+ _ASM_EXTABLE(1b, 3b)
+ : [ret] "+r" (ret), [rval] "+r" (rval)
+ : [ptr] "m" (*addr));
+ *val = rval;
+
+ return ret;
}
#ifdef CONFIG_XEN_PV
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 8c66d2f..36d2696 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -485,7 +485,7 @@ static void mce_report_event(struct pt_regs *regs)
* be somewhat complicated (e.g. segment offset would require an instruction
* parser). So only support physical addresses up to page granuality for now.
*/
-static int mce_usable_address(struct mce *m)
+int mce_usable_address(struct mce *m)
{
if (!(m->status & MCI_STATUS_ADDRV))
return 0;
@@ -505,6 +505,7 @@ static int mce_usable_address(struct mce *m)
return 1;
}
+EXPORT_SYMBOL_GPL(mce_usable_address);
bool mce_is_memory_error(struct mce *m)
{
@@ -534,7 +535,7 @@ bool mce_is_memory_error(struct mce *m)
}
EXPORT_SYMBOL_GPL(mce_is_memory_error);
-static bool mce_is_correctable(struct mce *m)
+bool mce_is_correctable(struct mce *m)
{
if (m->cpuvendor == X86_VENDOR_AMD && m->status & MCI_STATUS_DEFERRED)
return false;
@@ -547,6 +548,7 @@ static bool mce_is_correctable(struct mce *m)
return true;
}
+EXPORT_SYMBOL_GPL(mce_is_correctable);
static bool cec_add_mce(struct mce *m)
{
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index 1c72f38..e81a2db 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -20,6 +20,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/kexec.h>
+#include <linux/i8253.h>
#include <asm/processor.h>
#include <asm/hypervisor.h>
#include <asm/hyperv-tlfs.h>
@@ -295,6 +296,16 @@ static void __init ms_hyperv_init_platform(void)
if (efi_enabled(EFI_BOOT))
x86_platform.get_nmi_reason = hv_get_nmi_reason;
+ /*
+ * Hyper-V VMs have a PIT emulation quirk such that zeroing the
+ * counter register during PIT shutdown restarts the PIT. So it
+ * continues to interrupt @18.2 HZ. Setting i8253_clear_counter
+ * to false tells pit_shutdown() not to zero the counter so that
+ * the PIT really is shutdown. Generation 2 VMs don't have a PIT,
+ * and setting this value has no effect.
+ */
+ i8253_clear_counter_on_shutdown = false;
+
#if IS_ENABLED(CONFIG_HYPERV)
/*
* Setup the hook to get control post apic initialization.
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index d9ab49b..0eda91f 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -77,7 +77,7 @@ static __init int setup_vmw_sched_clock(char *s)
}
early_param("no-vmw-sched-clock", setup_vmw_sched_clock);
-static unsigned long long vmware_sched_clock(void)
+static unsigned long long notrace vmware_sched_clock(void)
{
unsigned long long ns;
diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index ab18e08..6135ae8 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -199,14 +199,6 @@ static void sanity_check_ldt_mapping(struct mm_struct *mm)
/*
* If PTI is enabled, this maps the LDT into the kernelmode and
* usermode tables for the given mm.
- *
- * There is no corresponding unmap function. Even if the LDT is freed, we
- * leave the PTEs around until the slot is reused or the mm is destroyed.
- * This is harmless: the LDT is always in ordinary memory, and no one will
- * access the freed slot.
- *
- * If we wanted to unmap freed LDTs, we'd also need to do a flush to make
- * it useful, and the flush would slow down modify_ldt().
*/
static int
map_ldt_struct(struct mm_struct *mm, struct ldt_struct *ldt, int slot)
@@ -214,8 +206,7 @@ map_ldt_struct(struct mm_struct *mm, struct ldt_struct *ldt, int slot)
unsigned long va;
bool is_vmalloc;
spinlock_t *ptl;
- pgd_t *pgd;
- int i;
+ int i, nr_pages;
if (!static_cpu_has(X86_FEATURE_PTI))
return 0;
@@ -229,16 +220,11 @@ map_ldt_struct(struct mm_struct *mm, struct ldt_struct *ldt, int slot)
/* Check if the current mappings are sane */
sanity_check_ldt_mapping(mm);
- /*
- * Did we already have the top level entry allocated? We can't
- * use pgd_none() for this because it doens't do anything on
- * 4-level page table kernels.
- */
- pgd = pgd_offset(mm, LDT_BASE_ADDR);
-
is_vmalloc = is_vmalloc_addr(ldt->entries);
- for (i = 0; i * PAGE_SIZE < ldt->nr_entries * LDT_ENTRY_SIZE; i++) {
+ nr_pages = DIV_ROUND_UP(ldt->nr_entries * LDT_ENTRY_SIZE, PAGE_SIZE);
+
+ for (i = 0; i < nr_pages; i++) {
unsigned long offset = i << PAGE_SHIFT;
const void *src = (char *)ldt->entries + offset;
unsigned long pfn;
@@ -272,13 +258,39 @@ map_ldt_struct(struct mm_struct *mm, struct ldt_struct *ldt, int slot)
/* Propagate LDT mapping to the user page-table */
map_ldt_struct_to_user(mm);
- va = (unsigned long)ldt_slot_va(slot);
- flush_tlb_mm_range(mm, va, va + LDT_SLOT_STRIDE, PAGE_SHIFT, false);
-
ldt->slot = slot;
return 0;
}
+static void unmap_ldt_struct(struct mm_struct *mm, struct ldt_struct *ldt)
+{
+ unsigned long va;
+ int i, nr_pages;
+
+ if (!ldt)
+ return;
+
+ /* LDT map/unmap is only required for PTI */
+ if (!static_cpu_has(X86_FEATURE_PTI))
+ return;
+
+ nr_pages = DIV_ROUND_UP(ldt->nr_entries * LDT_ENTRY_SIZE, PAGE_SIZE);
+
+ for (i = 0; i < nr_pages; i++) {
+ unsigned long offset = i << PAGE_SHIFT;
+ spinlock_t *ptl;
+ pte_t *ptep;
+
+ va = (unsigned long)ldt_slot_va(ldt->slot) + offset;
+ ptep = get_locked_pte(mm, va, &ptl);
+ pte_clear(mm, va, ptep);
+ pte_unmap_unlock(ptep, ptl);
+ }
+
+ va = (unsigned long)ldt_slot_va(ldt->slot);
+ flush_tlb_mm_range(mm, va, va + nr_pages * PAGE_SIZE, PAGE_SHIFT, false);
+}
+
#else /* !CONFIG_PAGE_TABLE_ISOLATION */
static int
@@ -286,6 +298,10 @@ map_ldt_struct(struct mm_struct *mm, struct ldt_struct *ldt, int slot)
{
return 0;
}
+
+static void unmap_ldt_struct(struct mm_struct *mm, struct ldt_struct *ldt)
+{
+}
#endif /* CONFIG_PAGE_TABLE_ISOLATION */
static void free_ldt_pgtables(struct mm_struct *mm)
@@ -524,6 +540,7 @@ static int write_ldt(void __user *ptr, unsigned long bytecount, int oldmode)
}
install_ldt(mm, new_ldt);
+ unmap_ldt_struct(mm, old_ldt);
free_ldt_struct(old_ldt);
error = 0;
diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c
index 1eae5af..891a75d 100644
--- a/arch/x86/kernel/vsmp_64.c
+++ b/arch/x86/kernel/vsmp_64.c
@@ -26,65 +26,8 @@
#define TOPOLOGY_REGISTER_OFFSET 0x10
-#if defined CONFIG_PCI && defined CONFIG_PARAVIRT_XXL
-/*
- * Interrupt control on vSMPowered systems:
- * ~AC is a shadow of IF. If IF is 'on' AC should be 'off'
- * and vice versa.
- */
-
-asmlinkage __visible unsigned long vsmp_save_fl(void)
-{
- unsigned long flags = native_save_fl();
-
- if (!(flags & X86_EFLAGS_IF) || (flags & X86_EFLAGS_AC))
- flags &= ~X86_EFLAGS_IF;
- return flags;
-}
-PV_CALLEE_SAVE_REGS_THUNK(vsmp_save_fl);
-
-__visible void vsmp_restore_fl(unsigned long flags)
-{
- if (flags & X86_EFLAGS_IF)
- flags &= ~X86_EFLAGS_AC;
- else
- flags |= X86_EFLAGS_AC;
- native_restore_fl(flags);
-}
-PV_CALLEE_SAVE_REGS_THUNK(vsmp_restore_fl);
-
-asmlinkage __visible void vsmp_irq_disable(void)
-{
- unsigned long flags = native_save_fl();
-
- native_restore_fl((flags & ~X86_EFLAGS_IF) | X86_EFLAGS_AC);
-}
-PV_CALLEE_SAVE_REGS_THUNK(vsmp_irq_disable);
-
-asmlinkage __visible void vsmp_irq_enable(void)
-{
- unsigned long flags = native_save_fl();
-
- native_restore_fl((flags | X86_EFLAGS_IF) & (~X86_EFLAGS_AC));
-}
-PV_CALLEE_SAVE_REGS_THUNK(vsmp_irq_enable);
-
-static unsigned __init vsmp_patch(u8 type, void *ibuf,
- unsigned long addr, unsigned len)
-{
- switch (type) {
- case PARAVIRT_PATCH(irq.irq_enable):
- case PARAVIRT_PATCH(irq.irq_disable):
- case PARAVIRT_PATCH(irq.save_fl):
- case PARAVIRT_PATCH(irq.restore_fl):
- return paravirt_patch_default(type, ibuf, addr, len);
- default:
- return native_patch(type, ibuf, addr, len);
- }
-
-}
-
-static void __init set_vsmp_pv_ops(void)
+#ifdef CONFIG_PCI
+static void __init set_vsmp_ctl(void)
{
void __iomem *address;
unsigned int cap, ctl, cfg;
@@ -109,28 +52,12 @@ static void __init set_vsmp_pv_ops(void)
}
#endif
- if (cap & ctl & (1 << 4)) {
- /* Setup irq ops and turn on vSMP IRQ fastpath handling */
- pv_ops.irq.irq_disable = PV_CALLEE_SAVE(vsmp_irq_disable);
- pv_ops.irq.irq_enable = PV_CALLEE_SAVE(vsmp_irq_enable);
- pv_ops.irq.save_fl = PV_CALLEE_SAVE(vsmp_save_fl);
- pv_ops.irq.restore_fl = PV_CALLEE_SAVE(vsmp_restore_fl);
- pv_ops.init.patch = vsmp_patch;
- ctl &= ~(1 << 4);
- }
writel(ctl, address + 4);
ctl = readl(address + 4);
pr_info("vSMP CTL: control set to:0x%08x\n", ctl);
early_iounmap(address, 8);
}
-#else
-static void __init set_vsmp_pv_ops(void)
-{
-}
-#endif
-
-#ifdef CONFIG_PCI
static int is_vsmp = -1;
static void __init detect_vsmp_box(void)
@@ -164,11 +91,14 @@ static int is_vsmp_box(void)
{
return 0;
}
+static void __init set_vsmp_ctl(void)
+{
+}
#endif
static void __init vsmp_cap_cpus(void)
{
-#if !defined(CONFIG_X86_VSMP) && defined(CONFIG_SMP)
+#if !defined(CONFIG_X86_VSMP) && defined(CONFIG_SMP) && defined(CONFIG_PCI)
void __iomem *address;
unsigned int cfg, topology, node_shift, maxcpus;
@@ -221,6 +151,6 @@ void __init vsmp_init(void)
vsmp_cap_cpus();
- set_vsmp_pv_ops();
+ set_vsmp_ctl();
return;
}
diff --git a/arch/x86/xen/mmu_pv.c b/arch/x86/xen/mmu_pv.c
index 0d7b3ae..a5d7ed1 100644
--- a/arch/x86/xen/mmu_pv.c
+++ b/arch/x86/xen/mmu_pv.c
@@ -1905,7 +1905,7 @@ void __init xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn)
init_top_pgt[0] = __pgd(0);
/* Pre-constructed entries are in pfn, so convert to mfn */
- /* L4[272] -> level3_ident_pgt */
+ /* L4[273] -> level3_ident_pgt */
/* L4[511] -> level3_kernel_pgt */
convert_pfn_mfn(init_top_pgt);
@@ -1925,8 +1925,8 @@ void __init xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn)
addr[0] = (unsigned long)pgd;
addr[1] = (unsigned long)l3;
addr[2] = (unsigned long)l2;
- /* Graft it onto L4[272][0]. Note that we creating an aliasing problem:
- * Both L4[272][0] and L4[511][510] have entries that point to the same
+ /* Graft it onto L4[273][0]. Note that we creating an aliasing problem:
+ * Both L4[273][0] and L4[511][510] have entries that point to the same
* L2 (PMD) tables. Meaning that if you modify it in __va space
* it will be also modified in the __ka space! (But if you just
* modify the PMD table to point to other PTE's or none, then you
diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c
index b067317..055e37e 100644
--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -656,8 +656,7 @@ bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn)
/*
* The interface requires atomic updates on p2m elements.
- * xen_safe_write_ulong() is using __put_user which does an atomic
- * store via asm().
+ * xen_safe_write_ulong() is using an atomic store via asm().
*/
if (likely(!xen_safe_write_ulong(xen_p2m_addr + pfn, mfn)))
return true;
diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c
index 441c882..1c8a881 100644
--- a/arch/x86/xen/spinlock.c
+++ b/arch/x86/xen/spinlock.c
@@ -9,6 +9,7 @@
#include <linux/log2.h>
#include <linux/gfp.h>
#include <linux/slab.h>
+#include <linux/atomic.h>
#include <asm/paravirt.h>
#include <asm/qspinlock.h>
@@ -21,6 +22,7 @@
static DEFINE_PER_CPU(int, lock_kicker_irq) = -1;
static DEFINE_PER_CPU(char *, irq_name);
+static DEFINE_PER_CPU(atomic_t, xen_qlock_wait_nest);
static bool xen_pvspin = true;
static void xen_qlock_kick(int cpu)
@@ -39,25 +41,25 @@ static void xen_qlock_kick(int cpu)
*/
static void xen_qlock_wait(u8 *byte, u8 val)
{
- unsigned long flags;
int irq = __this_cpu_read(lock_kicker_irq);
+ atomic_t *nest_cnt = this_cpu_ptr(&xen_qlock_wait_nest);
/* If kicker interrupts not initialized yet, just spin */
if (irq == -1 || in_nmi())
return;
- /* Guard against reentry. */
- local_irq_save(flags);
+ /* Detect reentry. */
+ atomic_inc(nest_cnt);
- /* If irq pending already clear it. */
- if (xen_test_irq_pending(irq)) {
+ /* If irq pending already and no nested call clear it. */
+ if (atomic_read(nest_cnt) == 1 && xen_test_irq_pending(irq)) {
xen_clear_irq_pending(irq);
} else if (READ_ONCE(*byte) == val) {
/* Block until irq becomes pending (or a spurious wakeup) */
xen_poll_irq(irq);
}
- local_irq_restore(flags);
+ atomic_dec(nest_cnt);
}
static irqreturn_t dummy_handler(int irq, void *dev_id)
diff --git a/block/bio.c b/block/bio.c
index d5368a4..a50d592 100644
--- a/block/bio.c
+++ b/block/bio.c
@@ -1260,6 +1260,7 @@ struct bio *bio_copy_user_iov(struct request_queue *q,
if (ret)
goto cleanup;
} else {
+ zero_fill_bio(bio);
iov_iter_advance(iter, bio->bi_iter.bi_size);
}
diff --git a/block/blk-lib.c b/block/blk-lib.c
index 76f867e..e8b3bb9 100644
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -51,16 +51,12 @@ int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
if ((sector | nr_sects) & bs_mask)
return -EINVAL;
+ if (!nr_sects)
+ return -EINVAL;
+
while (nr_sects) {
- unsigned int req_sects = nr_sects;
- sector_t end_sect;
-
- if (!req_sects)
- goto fail;
- if (req_sects > UINT_MAX >> 9)
- req_sects = UINT_MAX >> 9;
-
- end_sect = sector + req_sects;
+ unsigned int req_sects = min_t(unsigned int, nr_sects,
+ bio_allowed_max_sectors(q));
bio = blk_next_bio(bio, 0, gfp_mask);
bio->bi_iter.bi_sector = sector;
@@ -68,8 +64,8 @@ int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
bio_set_op_attrs(bio, op, 0);
bio->bi_iter.bi_size = req_sects << 9;
+ sector += req_sects;
nr_sects -= req_sects;
- sector = end_sect;
/*
* We can loop for a long time in here, if someone does
@@ -82,14 +78,6 @@ int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
*biop = bio;
return 0;
-
-fail:
- if (bio) {
- submit_bio_wait(bio);
- bio_put(bio);
- }
- *biop = NULL;
- return -EOPNOTSUPP;
}
EXPORT_SYMBOL(__blkdev_issue_discard);
@@ -161,7 +149,7 @@ static int __blkdev_issue_write_same(struct block_device *bdev, sector_t sector,
return -EOPNOTSUPP;
/* Ensure that max_write_same_sectors doesn't overflow bi_size */
- max_write_same_sectors = UINT_MAX >> 9;
+ max_write_same_sectors = bio_allowed_max_sectors(q);
while (nr_sects) {
bio = blk_next_bio(bio, 1, gfp_mask);
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 6b5ad27..e7696c47 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -46,7 +46,7 @@ static inline bool bio_will_gap(struct request_queue *q,
bio_get_first_bvec(prev_rq->bio, &pb);
else
bio_get_first_bvec(prev, &pb);
- if (pb.bv_offset)
+ if (pb.bv_offset & queue_virt_boundary(q))
return true;
/*
@@ -90,7 +90,8 @@ static struct bio *blk_bio_discard_split(struct request_queue *q,
/* Zero-sector (unknown) and one-sector granularities are the same. */
granularity = max(q->limits.discard_granularity >> 9, 1U);
- max_discard_sectors = min(q->limits.max_discard_sectors, UINT_MAX >> 9);
+ max_discard_sectors = min(q->limits.max_discard_sectors,
+ bio_allowed_max_sectors(q));
max_discard_sectors -= max_discard_sectors % granularity;
if (unlikely(!max_discard_sectors)) {
diff --git a/block/blk.h b/block/blk.h
index a1841b8..0089fef 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -169,7 +169,7 @@ static inline bool biovec_phys_mergeable(struct request_queue *q,
static inline bool __bvec_gap_to_prev(struct request_queue *q,
struct bio_vec *bprv, unsigned int offset)
{
- return offset ||
+ return (offset & queue_virt_boundary(q)) ||
((bprv->bv_offset + bprv->bv_len) & queue_virt_boundary(q));
}
@@ -396,6 +396,16 @@ static inline unsigned long blk_rq_deadline(struct request *rq)
}
/*
+ * The max size one bio can handle is UINT_MAX becasue bvec_iter.bi_size
+ * is defined as 'unsigned int', meantime it has to aligned to with logical
+ * block size which is the minimum accepted unit by hardware.
+ */
+static inline unsigned int bio_allowed_max_sectors(struct request_queue *q)
+{
+ return round_down(UINT_MAX, queue_logical_block_size(q)) >> 9;
+}
+
+/*
* Internal io_context interface
*/
void get_io_context(struct io_context *ioc);
diff --git a/drivers/acpi/nfit/mce.c b/drivers/acpi/nfit/mce.c
index e9626bf..d6c1b10 100644
--- a/drivers/acpi/nfit/mce.c
+++ b/drivers/acpi/nfit/mce.c
@@ -25,8 +25,12 @@ static int nfit_handle_mce(struct notifier_block *nb, unsigned long val,
struct acpi_nfit_desc *acpi_desc;
struct nfit_spa *nfit_spa;
- /* We only care about memory errors */
- if (!mce_is_memory_error(mce))
+ /* We only care about uncorrectable memory errors */
+ if (!mce_is_memory_error(mce) || mce_is_correctable(mce))
+ return NOTIFY_DONE;
+
+ /* Verify the address reported in the MCE is valid. */
+ if (!mce_usable_address(mce))
return NOTIFY_DONE;
/*
diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
index 10ecb232..4b1ff5b 100644
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Renesas R-Car SATA driver
*
* Author: Vladimir Barinov <[email protected]>
* Copyright (C) 2013-2015 Cogent Embedded, Inc.
* Copyright (C) 2013-2015 Renesas Solutions Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
*/
#include <linux/kernel.h>
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 56452ca..0ed4b20 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1919,6 +1919,7 @@ static int negotiate_mq(struct blkfront_info *info)
GFP_KERNEL);
if (!info->rinfo) {
xenbus_dev_fatal(info->xbdev, -ENOMEM, "allocating ring_info structure");
+ info->nr_rings = 0;
return -ENOMEM;
}
diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
index ef0ca94..ff83e89 100644
--- a/drivers/clk/clk-fixed-factor.c
+++ b/drivers/clk/clk-fixed-factor.c
@@ -210,6 +210,7 @@ static int of_fixed_factor_clk_remove(struct platform_device *pdev)
{
struct clk *clk = platform_get_drvdata(pdev);
+ of_clk_del_provider(pdev->dev.of_node);
clk_unregister_fixed_factor(clk);
return 0;
diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
index c981159b..792735d 100644
--- a/drivers/clk/meson/axg.c
+++ b/drivers/clk/meson/axg.c
@@ -325,6 +325,7 @@ static struct clk_regmap axg_fclk_div2 = {
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "fclk_div2_div" },
.num_parents = 1,
+ .flags = CLK_IS_CRITICAL,
},
};
@@ -349,6 +350,18 @@ static struct clk_regmap axg_fclk_div3 = {
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "fclk_div3_div" },
.num_parents = 1,
+ /*
+ * FIXME:
+ * This clock, as fdiv2, is used by the SCPI FW and is required
+ * by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) The SCPI generic driver claims and enable all the clocks
+ * it needs
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_IS_CRITICAL,
},
};
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 9309cfa..4ada966 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -506,6 +506,18 @@ static struct clk_regmap gxbb_fclk_div3 = {
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "fclk_div3_div" },
.num_parents = 1,
+ /*
+ * FIXME:
+ * This clock, as fdiv2, is used by the SCPI FW and is required
+ * by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) The SCPI generic driver claims and enable all the clocks
+ * it needs
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_IS_CRITICAL,
},
};
diff --git a/drivers/clk/qcom/gcc-qcs404.c b/drivers/clk/qcom/gcc-qcs404.c
index e4ca6a4..ef1b267 100644
--- a/drivers/clk/qcom/gcc-qcs404.c
+++ b/drivers/clk/qcom/gcc-qcs404.c
@@ -265,7 +265,7 @@ static struct clk_fixed_factor cxo = {
.div = 1,
.hw.init = &(struct clk_init_data){
.name = "cxo",
- .parent_names = (const char *[]){ "xo_board" },
+ .parent_names = (const char *[]){ "xo-board" },
.num_parents = 1,
.ops = &clk_fixed_factor_ops,
},
diff --git a/drivers/clocksource/i8253.c b/drivers/clocksource/i8253.c
index 9c38895..d4350bb 100644
--- a/drivers/clocksource/i8253.c
+++ b/drivers/clocksource/i8253.c
@@ -20,6 +20,13 @@
DEFINE_RAW_SPINLOCK(i8253_lock);
EXPORT_SYMBOL(i8253_lock);
+/*
+ * Handle PIT quirk in pit_shutdown() where zeroing the counter register
+ * restarts the PIT, negating the shutdown. On platforms with the quirk,
+ * platform specific code can set this to false.
+ */
+bool i8253_clear_counter_on_shutdown __ro_after_init = true;
+
#ifdef CONFIG_CLKSRC_I8253
/*
* Since the PIT overflows every tick, its not very useful
@@ -109,8 +116,11 @@ static int pit_shutdown(struct clock_event_device *evt)
raw_spin_lock(&i8253_lock);
outb_p(0x30, PIT_MODE);
- outb_p(0, PIT_CH0);
- outb_p(0, PIT_CH0);
+
+ if (i8253_clear_counter_on_shutdown) {
+ outb_p(0, PIT_CH0);
+ outb_p(0, PIT_CH0);
+ }
raw_spin_unlock(&i8253_lock);
return 0;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
index d0102cf..104b2e0 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
@@ -151,6 +151,7 @@ extern int amdgpu_compute_multipipe;
extern int amdgpu_gpu_recovery;
extern int amdgpu_emu_mode;
extern uint amdgpu_smu_memory_pool_size;
+extern uint amdgpu_dc_feature_mask;
extern struct amdgpu_mgpu_info mgpu_info;
#ifdef CONFIG_DRM_AMDGPU_SI
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index 943dbf3..8de55f7 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -127,6 +127,9 @@ int amdgpu_compute_multipipe = -1;
int amdgpu_gpu_recovery = -1; /* auto */
int amdgpu_emu_mode = 0;
uint amdgpu_smu_memory_pool_size = 0;
+/* FBC (bit 0) disabled by default*/
+uint amdgpu_dc_feature_mask = 0;
+
struct amdgpu_mgpu_info mgpu_info = {
.mutex = __MUTEX_INITIALIZER(mgpu_info.mutex),
};
@@ -631,6 +634,14 @@ module_param(halt_if_hws_hang, int, 0644);
MODULE_PARM_DESC(halt_if_hws_hang, "Halt if HWS hang is detected (0 = off (default), 1 = on)");
#endif
+/**
+ * DOC: dcfeaturemask (uint)
+ * Override display features enabled. See enum DC_FEATURE_MASK in drivers/gpu/drm/amd/include/amd_shared.h.
+ * The default is the current set of stable display features.
+ */
+MODULE_PARM_DESC(dcfeaturemask, "all stable DC features enabled (default))");
+module_param_named(dcfeaturemask, amdgpu_dc_feature_mask, uint, 0444);
+
static const struct pci_device_id pciidlist[] = {
#ifdef CONFIG_DRM_AMDGPU_SI
{0x1002, 0x6780, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI},
diff --git a/drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c b/drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c
index 2d44735..d13fc4f 100644
--- a/drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c
+++ b/drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c
@@ -49,6 +49,7 @@ int vega20_reg_base_init(struct amdgpu_device *adev)
adev->reg_offset[SMUIO_HWIP][i] = (uint32_t *)(&(SMUIO_BASE.instance[i]));
adev->reg_offset[NBIF_HWIP][i] = (uint32_t *)(&(NBIO_BASE.instance[i]));
adev->reg_offset[THM_HWIP][i] = (uint32_t *)(&(THM_BASE.instance[i]));
+ adev->reg_offset[CLK_HWIP][i] = (uint32_t *)(&(CLK_BASE.instance[i]));
}
return 0;
}
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index b0df6dc..c1262f6 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -429,6 +429,9 @@ static int amdgpu_dm_init(struct amdgpu_device *adev)
adev->asic_type < CHIP_RAVEN)
init_data.flags.gpu_vm_support = true;
+ if (amdgpu_dc_feature_mask & DC_FBC_MASK)
+ init_data.flags.fbc_support = true;
+
/* Display Core create. */
adev->dm.dc = dc_create(&init_data);
@@ -1524,13 +1527,6 @@ static int amdgpu_dm_backlight_update_status(struct backlight_device *bd)
{
struct amdgpu_display_manager *dm = bl_get_data(bd);
- /*
- * PWM interperts 0 as 100% rather than 0% because of HW
- * limitation for level 0.So limiting minimum brightness level
- * to 1.
- */
- if (bd->props.brightness < 1)
- return 1;
if (dc_link_set_backlight_level(dm->backlight_link,
bd->props.brightness, 0, 0))
return 0;
@@ -2707,18 +2703,11 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector,
drm_connector = &aconnector->base;
if (!aconnector->dc_sink) {
- /*
- * Create dc_sink when necessary to MST
- * Don't apply fake_sink to MST
- */
- if (aconnector->mst_port) {
- dm_dp_mst_dc_sink_create(drm_connector);
- return stream;
+ if (!aconnector->mst_port) {
+ sink = create_fake_sink(aconnector);
+ if (!sink)
+ return stream;
}
-
- sink = create_fake_sink(aconnector);
- if (!sink)
- return stream;
} else {
sink = aconnector->dc_sink;
}
@@ -3308,7 +3297,7 @@ void dm_drm_plane_destroy_state(struct drm_plane *plane,
static const struct drm_plane_funcs dm_plane_funcs = {
.update_plane = drm_atomic_helper_update_plane,
.disable_plane = drm_atomic_helper_disable_plane,
- .destroy = drm_plane_cleanup,
+ .destroy = drm_primary_helper_destroy,
.reset = dm_drm_plane_reset,
.atomic_duplicate_state = dm_drm_plane_duplicate_state,
.atomic_destroy_state = dm_drm_plane_destroy_state,
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
index 978b34a..924a38a 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
@@ -160,8 +160,6 @@ struct amdgpu_dm_connector {
struct mutex hpd_lock;
bool fake_enable;
-
- bool mst_connected;
};
#define to_amdgpu_dm_connector(x) container_of(x, struct amdgpu_dm_connector, base)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index 03601d7..d02c32a 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -205,40 +205,6 @@ static const struct drm_connector_funcs dm_dp_mst_connector_funcs = {
.atomic_get_property = amdgpu_dm_connector_atomic_get_property
};
-void dm_dp_mst_dc_sink_create(struct drm_connector *connector)
-{
- struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector);
- struct dc_sink *dc_sink;
- struct dc_sink_init_data init_params = {
- .link = aconnector->dc_link,
- .sink_signal = SIGNAL_TYPE_DISPLAY_PORT_MST };
-
- /* FIXME none of this is safe. we shouldn't touch aconnector here in
- * atomic_check
- */
-
- /*
- * TODO: Need to further figure out why ddc.algo is NULL while MST port exists
- */
- if (!aconnector->port || !aconnector->port->aux.ddc.algo)
- return;
-
- ASSERT(aconnector->edid);
-
- dc_sink = dc_link_add_remote_sink(
- aconnector->dc_link,
- (uint8_t *)aconnector->edid,
- (aconnector->edid->extensions + 1) * EDID_LENGTH,
- &init_params);
-
- dc_sink->priv = aconnector;
- aconnector->dc_sink = dc_sink;
-
- if (aconnector->dc_sink)
- amdgpu_dm_update_freesync_caps(
- connector, aconnector->edid);
-}
-
static int dm_dp_mst_get_modes(struct drm_connector *connector)
{
struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector);
@@ -319,12 +285,7 @@ dm_dp_create_fake_mst_encoder(struct amdgpu_dm_connector *connector)
struct amdgpu_device *adev = dev->dev_private;
struct amdgpu_encoder *amdgpu_encoder;
struct drm_encoder *encoder;
- const struct drm_connector_helper_funcs *connector_funcs =
- connector->base.helper_private;
- struct drm_encoder *enc_master =
- connector_funcs->best_encoder(&connector->base);
- DRM_DEBUG_KMS("enc master is %p\n", enc_master);
amdgpu_encoder = kzalloc(sizeof(*amdgpu_encoder), GFP_KERNEL);
if (!amdgpu_encoder)
return NULL;
@@ -354,25 +315,6 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
struct amdgpu_device *adev = dev->dev_private;
struct amdgpu_dm_connector *aconnector;
struct drm_connector *connector;
- struct drm_connector_list_iter conn_iter;
-
- drm_connector_list_iter_begin(dev, &conn_iter);
- drm_for_each_connector_iter(connector, &conn_iter) {
- aconnector = to_amdgpu_dm_connector(connector);
- if (aconnector->mst_port == master
- && !aconnector->port) {
- DRM_INFO("DM_MST: reusing connector: %p [id: %d] [master: %p]\n",
- aconnector, connector->base.id, aconnector->mst_port);
-
- aconnector->port = port;
- drm_connector_set_path_property(connector, pathprop);
-
- drm_connector_list_iter_end(&conn_iter);
- aconnector->mst_connected = true;
- return &aconnector->base;
- }
- }
- drm_connector_list_iter_end(&conn_iter);
aconnector = kzalloc(sizeof(*aconnector), GFP_KERNEL);
if (!aconnector)
@@ -421,8 +363,6 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
*/
amdgpu_dm_connector_funcs_reset(connector);
- aconnector->mst_connected = true;
-
DRM_INFO("DM_MST: added connector: %p [id: %d] [master: %p]\n",
aconnector, connector->base.id, aconnector->mst_port);
@@ -434,6 +374,9 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
static void dm_dp_destroy_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
struct drm_connector *connector)
{
+ struct amdgpu_dm_connector *master = container_of(mgr, struct amdgpu_dm_connector, mst_mgr);
+ struct drm_device *dev = master->base.dev;
+ struct amdgpu_device *adev = dev->dev_private;
struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector);
DRM_INFO("DM_MST: Disabling connector: %p [id: %d] [master: %p]\n",
@@ -447,7 +390,10 @@ static void dm_dp_destroy_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
aconnector->dc_sink = NULL;
}
- aconnector->mst_connected = false;
+ drm_connector_unregister(connector);
+ if (adev->mode_info.rfbdev)
+ drm_fb_helper_remove_one_connector(&adev->mode_info.rfbdev->helper, connector);
+ drm_connector_put(connector);
}
static void dm_dp_mst_hotplug(struct drm_dp_mst_topology_mgr *mgr)
@@ -458,18 +404,10 @@ static void dm_dp_mst_hotplug(struct drm_dp_mst_topology_mgr *mgr)
drm_kms_helper_hotplug_event(dev);
}
-static void dm_dp_mst_link_status_reset(struct drm_connector *connector)
-{
- mutex_lock(&connector->dev->mode_config.mutex);
- drm_connector_set_link_status_property(connector, DRM_MODE_LINK_STATUS_BAD);
- mutex_unlock(&connector->dev->mode_config.mutex);
-}
-
static void dm_dp_mst_register_connector(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct amdgpu_device *adev = dev->dev_private;
- struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector);
if (adev->mode_info.rfbdev)
drm_fb_helper_add_one_connector(&adev->mode_info.rfbdev->helper, connector);
@@ -477,9 +415,6 @@ static void dm_dp_mst_register_connector(struct drm_connector *connector)
DRM_ERROR("adev->mode_info.rfbdev is NULL\n");
drm_connector_register(connector);
-
- if (aconnector->mst_connected)
- dm_dp_mst_link_status_reset(connector);
}
static const struct drm_dp_mst_topology_cbs dm_mst_cbs = {
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h
index 8cf51da..2da851b 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h
@@ -31,6 +31,5 @@ struct amdgpu_dm_connector;
void amdgpu_dm_initialize_dp_connector(struct amdgpu_display_manager *dm,
struct amdgpu_dm_connector *aconnector);
-void dm_dp_mst_dc_sink_create(struct drm_connector *connector);
#endif
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index fb04a4a..5da2186 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1722,7 +1722,7 @@ static void write_i2c_retimer_setting(
i2c_success = i2c_write(pipe_ctx, slave_address,
buffer, sizeof(buffer));
RETIMER_REDRIVER_INFO("retimer write to slave_address = 0x%x,\
- offset = 0x%d, reg_val = 0x%d, i2c_success = %d\n",
+ offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n",
slave_address, buffer[0], buffer[1], i2c_success?1:0);
if (!i2c_success)
/* Write failure */
@@ -1734,7 +1734,7 @@ static void write_i2c_retimer_setting(
i2c_success = i2c_write(pipe_ctx, slave_address,
buffer, sizeof(buffer));
RETIMER_REDRIVER_INFO("retimer write to slave_address = 0x%x,\
- offset = 0x%d, reg_val = 0x%d, i2c_success = %d\n",
+ offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n",
slave_address, buffer[0], buffer[1], i2c_success?1:0);
if (!i2c_success)
/* Write failure */
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 1995271..b57fa61 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -169,6 +169,7 @@ struct link_training_settings;
struct dc_config {
bool gpu_vm_support;
bool disable_disp_pll_sharing;
+ bool fbc_support;
};
enum visual_confirm {
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index b75ede5..b459867 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -1736,7 +1736,12 @@ static void set_static_screen_control(struct pipe_ctx **pipe_ctx,
if (events->force_trigger)
value |= 0x1;
- value |= 0x84;
+ if (num_pipes) {
+ struct dc *dc = pipe_ctx[0]->stream->ctx->dc;
+
+ if (dc->fbc_compressor)
+ value |= 0x84;
+ }
for (i = 0; i < num_pipes; i++)
pipe_ctx[i]->stream_res.tg->funcs->
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c
index e3624ca..7c9fd90 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c
@@ -1362,7 +1362,8 @@ static bool construct(
pool->base.sw_i2cs[i] = NULL;
}
- dc->fbc_compressor = dce110_compressor_create(ctx);
+ if (dc->config.fbc_support)
+ dc->fbc_compressor = dce110_compressor_create(ctx);
if (!underlay_create(ctx, &pool->base))
goto res_create_fail;
diff --git a/drivers/gpu/drm/amd/include/amd_shared.h b/drivers/gpu/drm/amd/include/amd_shared.h
index 2083c30..470d7b8 100644
--- a/drivers/gpu/drm/amd/include/amd_shared.h
+++ b/drivers/gpu/drm/amd/include/amd_shared.h
@@ -133,6 +133,10 @@ enum PP_FEATURE_MASK {
PP_AVFS_MASK = 0x40000,
};
+enum DC_FEATURE_MASK {
+ DC_FBC_MASK = 0x1,
+};
+
/**
* struct amd_ip_funcs - general hooks for managing amdgpu IP Blocks
*/
diff --git a/drivers/gpu/drm/amd/include/atomfirmware.h b/drivers/gpu/drm/amd/include/atomfirmware.h
index d2e7c0f..8eb0bb2 100644
--- a/drivers/gpu/drm/amd/include/atomfirmware.h
+++ b/drivers/gpu/drm/amd/include/atomfirmware.h
@@ -1325,7 +1325,7 @@ struct atom_smu_info_v3_3 {
struct atom_common_table_header table_header;
uint8_t smuip_min_ver;
uint8_t smuip_max_ver;
- uint8_t smu_rsd1;
+ uint8_t waflclk_ss_mode;
uint8_t gpuclk_ss_mode;
uint16_t sclk_ss_percentage;
uint16_t sclk_ss_rate_10hz;
@@ -1355,7 +1355,10 @@ struct atom_smu_info_v3_3 {
uint32_t syspll3_1_vco_freq_10khz;
uint32_t bootup_fclk_10khz;
uint32_t bootup_waflclk_10khz;
- uint32_t reserved[3];
+ uint32_t smu_info_caps;
+ uint16_t waflclk_ss_percentage; // in unit of 0.001%
+ uint16_t smuinitoffset;
+ uint32_t reserved;
};
/*
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
index 57143d5..99861f3 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
@@ -120,6 +120,7 @@ static void vega20_set_default_registry_data(struct pp_hwmgr *hwmgr)
data->registry_data.disable_auto_wattman = 1;
data->registry_data.auto_wattman_debug = 0;
data->registry_data.auto_wattman_sample_period = 100;
+ data->registry_data.fclk_gfxclk_ratio = 0x3F6CCCCD;
data->registry_data.auto_wattman_threshold = 50;
data->registry_data.gfxoff_controlled_by_driver = 1;
data->gfxoff_allowed = false;
@@ -829,6 +830,28 @@ static int vega20_enable_all_smu_features(struct pp_hwmgr *hwmgr)
return 0;
}
+static int vega20_notify_smc_display_change(struct pp_hwmgr *hwmgr)
+{
+ struct vega20_hwmgr *data = (struct vega20_hwmgr *)(hwmgr->backend);
+
+ if (data->smu_features[GNLD_DPM_UCLK].enabled)
+ return smum_send_msg_to_smc_with_parameter(hwmgr,
+ PPSMC_MSG_SetUclkFastSwitch,
+ 1);
+
+ return 0;
+}
+
+static int vega20_send_clock_ratio(struct pp_hwmgr *hwmgr)
+{
+ struct vega20_hwmgr *data =
+ (struct vega20_hwmgr *)(hwmgr->backend);
+
+ return smum_send_msg_to_smc_with_parameter(hwmgr,
+ PPSMC_MSG_SetFclkGfxClkRatio,
+ data->registry_data.fclk_gfxclk_ratio);
+}
+
static int vega20_disable_all_smu_features(struct pp_hwmgr *hwmgr)
{
struct vega20_hwmgr *data =
@@ -1532,6 +1555,16 @@ static int vega20_enable_dpm_tasks(struct pp_hwmgr *hwmgr)
"[EnableDPMTasks] Failed to enable all smu features!",
return result);
+ result = vega20_notify_smc_display_change(hwmgr);
+ PP_ASSERT_WITH_CODE(!result,
+ "[EnableDPMTasks] Failed to notify smc display change!",
+ return result);
+
+ result = vega20_send_clock_ratio(hwmgr);
+ PP_ASSERT_WITH_CODE(!result,
+ "[EnableDPMTasks] Failed to send clock ratio!",
+ return result);
+
/* Initialize UVD/VCE powergating state */
vega20_init_powergate_state(hwmgr);
@@ -1972,19 +2005,6 @@ static int vega20_read_sensor(struct pp_hwmgr *hwmgr, int idx,
return ret;
}
-static int vega20_notify_smc_display_change(struct pp_hwmgr *hwmgr,
- bool has_disp)
-{
- struct vega20_hwmgr *data = (struct vega20_hwmgr *)(hwmgr->backend);
-
- if (data->smu_features[GNLD_DPM_UCLK].enabled)
- return smum_send_msg_to_smc_with_parameter(hwmgr,
- PPSMC_MSG_SetUclkFastSwitch,
- has_disp ? 1 : 0);
-
- return 0;
-}
-
int vega20_display_clock_voltage_request(struct pp_hwmgr *hwmgr,
struct pp_display_clock_request *clock_req)
{
@@ -2044,13 +2064,6 @@ static int vega20_notify_smc_display_config_after_ps_adjustment(
struct pp_display_clock_request clock_req;
int ret = 0;
- if ((hwmgr->display_config->num_display > 1) &&
- !hwmgr->display_config->multi_monitor_in_sync &&
- !hwmgr->display_config->nb_pstate_switch_disable)
- vega20_notify_smc_display_change(hwmgr, false);
- else
- vega20_notify_smc_display_change(hwmgr, true);
-
min_clocks.dcefClock = hwmgr->display_config->min_dcef_set_clk;
min_clocks.dcefClockInSR = hwmgr->display_config->min_dcef_deep_sleep_set_clk;
min_clocks.memoryClock = hwmgr->display_config->min_mem_set_clock;
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h
index 56fe6a0..25faaa5 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h
@@ -328,6 +328,7 @@ struct vega20_registry_data {
uint8_t disable_auto_wattman;
uint32_t auto_wattman_debug;
uint32_t auto_wattman_sample_period;
+ uint32_t fclk_gfxclk_ratio;
uint8_t auto_wattman_threshold;
uint8_t log_avfs_param;
uint8_t enable_enginess;
diff --git a/drivers/gpu/drm/amd/powerplay/inc/vega20_ppsmc.h b/drivers/gpu/drm/amd/powerplay/inc/vega20_ppsmc.h
index 45d64a8..4f63a73 100644
--- a/drivers/gpu/drm/amd/powerplay/inc/vega20_ppsmc.h
+++ b/drivers/gpu/drm/amd/powerplay/inc/vega20_ppsmc.h
@@ -105,7 +105,8 @@
#define PPSMC_MSG_SetSystemVirtualDramAddrHigh 0x4B
#define PPSMC_MSG_SetSystemVirtualDramAddrLow 0x4C
#define PPSMC_MSG_WaflTest 0x4D
-// Unused ID 0x4E to 0x50
+#define PPSMC_MSG_SetFclkGfxClkRatio 0x4E
+// Unused ID 0x4F to 0x50
#define PPSMC_MSG_AllowGfxOff 0x51
#define PPSMC_MSG_DisallowGfxOff 0x52
#define PPSMC_MSG_GetPptLimit 0x53
diff --git a/drivers/gpu/drm/etnaviv/etnaviv_sched.c b/drivers/gpu/drm/etnaviv/etnaviv_sched.c
index e7c3ed6..9b47636 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_sched.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_sched.c
@@ -93,7 +93,7 @@ static void etnaviv_sched_timedout_job(struct drm_sched_job *sched_job)
* If the GPU managed to complete this jobs fence, the timout is
* spurious. Bail out.
*/
- if (fence_completed(gpu, submit->out_fence->seqno))
+ if (dma_fence_is_signaled(submit->out_fence))
return;
/*
diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
index 94529aa..aef487d 100644
--- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
+++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
@@ -164,13 +164,6 @@ static u32 decon_get_frame_count(struct decon_context *ctx, bool end)
return frm;
}
-static u32 decon_get_vblank_counter(struct exynos_drm_crtc *crtc)
-{
- struct decon_context *ctx = crtc->ctx;
-
- return decon_get_frame_count(ctx, false);
-}
-
static void decon_setup_trigger(struct decon_context *ctx)
{
if (!ctx->crtc->i80_mode && !(ctx->out_type & I80_HW_TRG))
@@ -536,7 +529,6 @@ static const struct exynos_drm_crtc_ops decon_crtc_ops = {
.disable = decon_disable,
.enable_vblank = decon_enable_vblank,
.disable_vblank = decon_disable_vblank,
- .get_vblank_counter = decon_get_vblank_counter,
.atomic_begin = decon_atomic_begin,
.update_plane = decon_update_plane,
.disable_plane = decon_disable_plane,
@@ -554,7 +546,6 @@ static int decon_bind(struct device *dev, struct device *master, void *data)
int ret;
ctx->drm_dev = drm_dev;
- drm_dev->max_vblank_count = 0xffffffff;
for (win = ctx->first_win; win < WINDOWS_NR; win++) {
ctx->configs[win].pixel_formats = decon_formats;
diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
index eea90251..2696289 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
@@ -162,16 +162,6 @@ static void exynos_drm_crtc_disable_vblank(struct drm_crtc *crtc)
exynos_crtc->ops->disable_vblank(exynos_crtc);
}
-static u32 exynos_drm_crtc_get_vblank_counter(struct drm_crtc *crtc)
-{
- struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
-
- if (exynos_crtc->ops->get_vblank_counter)
- return exynos_crtc->ops->get_vblank_counter(exynos_crtc);
-
- return 0;
-}
-
static const struct drm_crtc_funcs exynos_crtc_funcs = {
.set_config = drm_atomic_helper_set_config,
.page_flip = drm_atomic_helper_page_flip,
@@ -181,7 +171,6 @@ static const struct drm_crtc_funcs exynos_crtc_funcs = {
.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
.enable_vblank = exynos_drm_crtc_enable_vblank,
.disable_vblank = exynos_drm_crtc_disable_vblank,
- .get_vblank_counter = exynos_drm_crtc_get_vblank_counter,
};
struct exynos_drm_crtc *exynos_drm_crtc_create(struct drm_device *drm_dev,
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h
index ec9604f..5e61e70 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.h
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h
@@ -135,7 +135,6 @@ struct exynos_drm_crtc_ops {
void (*disable)(struct exynos_drm_crtc *crtc);
int (*enable_vblank)(struct exynos_drm_crtc *crtc);
void (*disable_vblank)(struct exynos_drm_crtc *crtc);
- u32 (*get_vblank_counter)(struct exynos_drm_crtc *crtc);
enum drm_mode_status (*mode_valid)(struct exynos_drm_crtc *crtc,
const struct drm_display_mode *mode);
bool (*mode_fixup)(struct exynos_drm_crtc *crtc,
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 07af775..d81e62a 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -14,6 +14,7 @@
#include <drm/drmP.h>
#include <drm/drm_crtc_helper.h>
+#include <drm/drm_fb_helper.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_panel.h>
#include <drm/drm_atomic_helper.h>
@@ -1474,12 +1475,12 @@ static int exynos_dsi_create_connector(struct drm_encoder *encoder)
{
struct exynos_dsi *dsi = encoder_to_dsi(encoder);
struct drm_connector *connector = &dsi->connector;
+ struct drm_device *drm = encoder->dev;
int ret;
connector->polled = DRM_CONNECTOR_POLL_HPD;
- ret = drm_connector_init(encoder->dev, connector,
- &exynos_dsi_connector_funcs,
+ ret = drm_connector_init(drm, connector, &exynos_dsi_connector_funcs,
DRM_MODE_CONNECTOR_DSI);
if (ret) {
DRM_ERROR("Failed to initialize connector with drm\n");
@@ -1489,7 +1490,12 @@ static int exynos_dsi_create_connector(struct drm_encoder *encoder)
connector->status = connector_status_disconnected;
drm_connector_helper_add(connector, &exynos_dsi_connector_helper_funcs);
drm_connector_attach_encoder(connector, encoder);
+ if (!drm->registered)
+ return 0;
+ connector->funcs->reset(connector);
+ drm_fb_helper_add_one_connector(drm->fb_helper, connector);
+ drm_connector_register(connector);
return 0;
}
@@ -1527,7 +1533,9 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
}
dsi->panel = of_drm_find_panel(device->dev.of_node);
- if (dsi->panel) {
+ if (IS_ERR(dsi->panel)) {
+ dsi->panel = NULL;
+ } else {
drm_panel_attach(dsi->panel, &dsi->connector);
dsi->connector.status = connector_status_connected;
}
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
index 918dd2c..01d1822 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
@@ -192,7 +192,7 @@ int exynos_drm_fbdev_init(struct drm_device *dev)
struct drm_fb_helper *helper;
int ret;
- if (!dev->mode_config.num_crtc || !dev->mode_config.num_connector)
+ if (!dev->mode_config.num_crtc)
return 0;
fbdev = kzalloc(sizeof(*fbdev), GFP_KERNEL);
diff --git a/drivers/gpu/drm/i915/gvt/gtt.c b/drivers/gpu/drm/i915/gvt/gtt.c
index 2402395..58e166e 100644
--- a/drivers/gpu/drm/i915/gvt/gtt.c
+++ b/drivers/gpu/drm/i915/gvt/gtt.c
@@ -1905,7 +1905,6 @@ static struct intel_vgpu_mm *intel_vgpu_create_ggtt_mm(struct intel_vgpu *vgpu)
vgpu_free_mm(mm);
return ERR_PTR(-ENOMEM);
}
- mm->ggtt_mm.last_partial_off = -1UL;
return mm;
}
@@ -1930,7 +1929,6 @@ void _intel_vgpu_mm_release(struct kref *mm_ref)
invalidate_ppgtt_mm(mm);
} else {
vfree(mm->ggtt_mm.virtual_ggtt);
- mm->ggtt_mm.last_partial_off = -1UL;
}
vgpu_free_mm(mm);
@@ -2168,6 +2166,8 @@ static int emulate_ggtt_mmio_write(struct intel_vgpu *vgpu, unsigned int off,
struct intel_gvt_gtt_entry e, m;
dma_addr_t dma_addr;
int ret;
+ struct intel_gvt_partial_pte *partial_pte, *pos, *n;
+ bool partial_update = false;
if (bytes != 4 && bytes != 8)
return -EINVAL;
@@ -2178,68 +2178,57 @@ static int emulate_ggtt_mmio_write(struct intel_vgpu *vgpu, unsigned int off,
if (!vgpu_gmadr_is_valid(vgpu, gma))
return 0;
- ggtt_get_guest_entry(ggtt_mm, &e, g_gtt_index);
-
+ e.type = GTT_TYPE_GGTT_PTE;
memcpy((void *)&e.val64 + (off & (info->gtt_entry_size - 1)), p_data,
bytes);
/* If ggtt entry size is 8 bytes, and it's split into two 4 bytes
- * write, we assume the two 4 bytes writes are consecutive.
- * Otherwise, we abort and report error
+ * write, save the first 4 bytes in a list and update virtual
+ * PTE. Only update shadow PTE when the second 4 bytes comes.
*/
if (bytes < info->gtt_entry_size) {
- if (ggtt_mm->ggtt_mm.last_partial_off == -1UL) {
- /* the first partial part*/
- ggtt_mm->ggtt_mm.last_partial_off = off;
- ggtt_mm->ggtt_mm.last_partial_data = e.val64;
- return 0;
- } else if ((g_gtt_index ==
- (ggtt_mm->ggtt_mm.last_partial_off >>
- info->gtt_entry_size_shift)) &&
- (off != ggtt_mm->ggtt_mm.last_partial_off)) {
- /* the second partial part */
+ bool found = false;
- int last_off = ggtt_mm->ggtt_mm.last_partial_off &
- (info->gtt_entry_size - 1);
+ list_for_each_entry_safe(pos, n,
+ &ggtt_mm->ggtt_mm.partial_pte_list, list) {
+ if (g_gtt_index == pos->offset >>
+ info->gtt_entry_size_shift) {
+ if (off != pos->offset) {
+ /* the second partial part*/
+ int last_off = pos->offset &
+ (info->gtt_entry_size - 1);
- memcpy((void *)&e.val64 + last_off,
- (void *)&ggtt_mm->ggtt_mm.last_partial_data +
- last_off, bytes);
+ memcpy((void *)&e.val64 + last_off,
+ (void *)&pos->data + last_off,
+ bytes);
- ggtt_mm->ggtt_mm.last_partial_off = -1UL;
- } else {
- int last_offset;
+ list_del(&pos->list);
+ kfree(pos);
+ found = true;
+ break;
+ }
- gvt_vgpu_err("failed to populate guest ggtt entry: abnormal ggtt entry write sequence, last_partial_off=%lx, offset=%x, bytes=%d, ggtt entry size=%d\n",
- ggtt_mm->ggtt_mm.last_partial_off, off,
- bytes, info->gtt_entry_size);
+ /* update of the first partial part */
+ pos->data = e.val64;
+ ggtt_set_guest_entry(ggtt_mm, &e, g_gtt_index);
+ return 0;
+ }
+ }
- /* set host ggtt entry to scratch page and clear
- * virtual ggtt entry as not present for last
- * partially write offset
- */
- last_offset = ggtt_mm->ggtt_mm.last_partial_off &
- (~(info->gtt_entry_size - 1));
-
- ggtt_get_host_entry(ggtt_mm, &m, last_offset);
- ggtt_invalidate_pte(vgpu, &m);
- ops->set_pfn(&m, gvt->gtt.scratch_mfn);
- ops->clear_present(&m);
- ggtt_set_host_entry(ggtt_mm, &m, last_offset);
- ggtt_invalidate(gvt->dev_priv);
-
- ggtt_get_guest_entry(ggtt_mm, &e, last_offset);
- ops->clear_present(&e);
- ggtt_set_guest_entry(ggtt_mm, &e, last_offset);
-
- ggtt_mm->ggtt_mm.last_partial_off = off;
- ggtt_mm->ggtt_mm.last_partial_data = e.val64;
-
- return 0;
+ if (!found) {
+ /* the first partial part */
+ partial_pte = kzalloc(sizeof(*partial_pte), GFP_KERNEL);
+ if (!partial_pte)
+ return -ENOMEM;
+ partial_pte->offset = off;
+ partial_pte->data = e.val64;
+ list_add_tail(&partial_pte->list,
+ &ggtt_mm->ggtt_mm.partial_pte_list);
+ partial_update = true;
}
}
- if (ops->test_present(&e)) {
+ if (!partial_update && (ops->test_present(&e))) {
gfn = ops->get_pfn(&e);
m = e;
@@ -2263,16 +2252,18 @@ static int emulate_ggtt_mmio_write(struct intel_vgpu *vgpu, unsigned int off,
} else
ops->set_pfn(&m, dma_addr >> PAGE_SHIFT);
} else {
- ggtt_get_host_entry(ggtt_mm, &m, g_gtt_index);
- ggtt_invalidate_pte(vgpu, &m);
ops->set_pfn(&m, gvt->gtt.scratch_mfn);
ops->clear_present(&m);
}
out:
+ ggtt_set_guest_entry(ggtt_mm, &e, g_gtt_index);
+
+ ggtt_get_host_entry(ggtt_mm, &e, g_gtt_index);
+ ggtt_invalidate_pte(vgpu, &e);
+
ggtt_set_host_entry(ggtt_mm, &m, g_gtt_index);
ggtt_invalidate(gvt->dev_priv);
- ggtt_set_guest_entry(ggtt_mm, &e, g_gtt_index);
return 0;
}
@@ -2430,6 +2421,8 @@ int intel_vgpu_init_gtt(struct intel_vgpu *vgpu)
intel_vgpu_reset_ggtt(vgpu, false);
+ INIT_LIST_HEAD(>t->ggtt_mm->ggtt_mm.partial_pte_list);
+
return create_scratch_page_tree(vgpu);
}
@@ -2454,6 +2447,14 @@ static void intel_vgpu_destroy_all_ppgtt_mm(struct intel_vgpu *vgpu)
static void intel_vgpu_destroy_ggtt_mm(struct intel_vgpu *vgpu)
{
+ struct intel_gvt_partial_pte *pos;
+
+ list_for_each_entry(pos,
+ &vgpu->gtt.ggtt_mm->ggtt_mm.partial_pte_list, list) {
+ gvt_dbg_mm("partial PTE update on hold 0x%lx : 0x%llx\n",
+ pos->offset, pos->data);
+ kfree(pos);
+ }
intel_vgpu_destroy_mm(vgpu->gtt.ggtt_mm);
vgpu->gtt.ggtt_mm = NULL;
}
diff --git a/drivers/gpu/drm/i915/gvt/gtt.h b/drivers/gpu/drm/i915/gvt/gtt.h
index 7a9b361..d8cb04c 100644
--- a/drivers/gpu/drm/i915/gvt/gtt.h
+++ b/drivers/gpu/drm/i915/gvt/gtt.h
@@ -35,7 +35,6 @@
#define _GVT_GTT_H_
#define I915_GTT_PAGE_SHIFT 12
-#define I915_GTT_PAGE_MASK (~(I915_GTT_PAGE_SIZE - 1))
struct intel_vgpu_mm;
@@ -133,6 +132,12 @@ enum intel_gvt_mm_type {
#define GVT_RING_CTX_NR_PDPS GEN8_3LVL_PDPES
+struct intel_gvt_partial_pte {
+ unsigned long offset;
+ u64 data;
+ struct list_head list;
+};
+
struct intel_vgpu_mm {
enum intel_gvt_mm_type type;
struct intel_vgpu *vgpu;
@@ -157,8 +162,7 @@ struct intel_vgpu_mm {
} ppgtt_mm;
struct {
void *virtual_ggtt;
- unsigned long last_partial_off;
- u64 last_partial_data;
+ struct list_head partial_pte_list;
} ggtt_mm;
};
};
diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c
index 90f50f6..aa280bb 100644
--- a/drivers/gpu/drm/i915/gvt/handlers.c
+++ b/drivers/gpu/drm/i915/gvt/handlers.c
@@ -1609,7 +1609,7 @@ static int bxt_gt_disp_pwron_write(struct intel_vgpu *vgpu,
return 0;
}
-static int bxt_edp_psr_imr_iir_write(struct intel_vgpu *vgpu,
+static int edp_psr_imr_iir_write(struct intel_vgpu *vgpu,
unsigned int offset, void *p_data, unsigned int bytes)
{
vgpu_vreg(vgpu, offset) = 0;
@@ -2607,6 +2607,9 @@ static int init_generic_mmio_info(struct intel_gvt *gvt)
MMIO_DFH(_MMIO(0x1a178), D_BDW_PLUS, F_CMD_ACCESS, NULL, NULL);
MMIO_DFH(_MMIO(0x1a17c), D_BDW_PLUS, F_CMD_ACCESS, NULL, NULL);
MMIO_DFH(_MMIO(0x2217c), D_BDW_PLUS, F_CMD_ACCESS, NULL, NULL);
+
+ MMIO_DH(EDP_PSR_IMR, D_BDW_PLUS, NULL, edp_psr_imr_iir_write);
+ MMIO_DH(EDP_PSR_IIR, D_BDW_PLUS, NULL, edp_psr_imr_iir_write);
return 0;
}
@@ -3205,9 +3208,6 @@ static int init_bxt_mmio_info(struct intel_gvt *gvt)
MMIO_D(HSW_TVIDEO_DIP_GCP(TRANSCODER_B), D_BXT);
MMIO_D(HSW_TVIDEO_DIP_GCP(TRANSCODER_C), D_BXT);
- MMIO_DH(EDP_PSR_IMR, D_BXT, NULL, bxt_edp_psr_imr_iir_write);
- MMIO_DH(EDP_PSR_IIR, D_BXT, NULL, bxt_edp_psr_imr_iir_write);
-
MMIO_D(RC6_CTX_BASE, D_BXT);
MMIO_D(GEN8_PUSHBUS_CONTROL, D_BXT);
diff --git a/drivers/gpu/drm/i915/gvt/mmio_context.c b/drivers/gpu/drm/i915/gvt/mmio_context.c
index 10e63ee..36a5147 100644
--- a/drivers/gpu/drm/i915/gvt/mmio_context.c
+++ b/drivers/gpu/drm/i915/gvt/mmio_context.c
@@ -131,7 +131,7 @@ static struct engine_mmio gen9_engine_mmio_list[] __cacheline_aligned = {
{RCS, GAMT_CHKN_BIT_REG, 0x0, false}, /* 0x4ab8 */
{RCS, GEN9_GAMT_ECO_REG_RW_IA, 0x0, false}, /* 0x4ab0 */
- {RCS, GEN9_CSFE_CHICKEN1_RCS, 0x0, false}, /* 0x20d4 */
+ {RCS, GEN9_CSFE_CHICKEN1_RCS, 0xffff, false}, /* 0x20d4 */
{RCS, GEN8_GARBCNTL, 0x0, false}, /* 0xb004 */
{RCS, GEN7_FF_THREAD_MODE, 0x0, false}, /* 0x20a0 */
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 44e2c0f..ffdbbac 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1175,8 +1175,6 @@ skl_dram_get_channels_info(struct drm_i915_private *dev_priv)
return -EINVAL;
}
- dram_info->valid_dimm = true;
-
/*
* If any of the channel is single rank channel, worst case output
* will be same as if single rank memory, so consider single rank
@@ -1193,8 +1191,7 @@ skl_dram_get_channels_info(struct drm_i915_private *dev_priv)
return -EINVAL;
}
- if (ch0.is_16gb_dimm || ch1.is_16gb_dimm)
- dram_info->is_16gb_dimm = true;
+ dram_info->is_16gb_dimm = ch0.is_16gb_dimm || ch1.is_16gb_dimm;
dev_priv->dram_info.symmetric_memory = intel_is_dram_symmetric(val_ch0,
val_ch1,
@@ -1314,7 +1311,6 @@ bxt_get_dram_info(struct drm_i915_private *dev_priv)
return -EINVAL;
}
- dram_info->valid_dimm = true;
dram_info->valid = true;
return 0;
}
@@ -1327,12 +1323,17 @@ intel_get_dram_info(struct drm_i915_private *dev_priv)
int ret;
dram_info->valid = false;
- dram_info->valid_dimm = false;
- dram_info->is_16gb_dimm = false;
dram_info->rank = I915_DRAM_RANK_INVALID;
dram_info->bandwidth_kbps = 0;
dram_info->num_channels = 0;
+ /*
+ * Assume 16Gb DIMMs are present until proven otherwise.
+ * This is only used for the level 0 watermark latency
+ * w/a which does not apply to bxt/glk.
+ */
+ dram_info->is_16gb_dimm = !IS_GEN9_LP(dev_priv);
+
if (INTEL_GEN(dev_priv) < 9 || IS_GEMINILAKE(dev_priv))
return;
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 8624b4b..9102571 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1948,7 +1948,6 @@ struct drm_i915_private {
struct dram_info {
bool valid;
- bool valid_dimm;
bool is_16gb_dimm;
u8 num_channels;
enum dram_rank {
diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index 0918728..1aaccbe 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -460,7 +460,7 @@ eb_validate_vma(struct i915_execbuffer *eb,
* any non-page-aligned or non-canonical addresses.
*/
if (unlikely(entry->flags & EXEC_OBJECT_PINNED &&
- entry->offset != gen8_canonical_addr(entry->offset & PAGE_MASK)))
+ entry->offset != gen8_canonical_addr(entry->offset & I915_GTT_PAGE_MASK)))
return -EINVAL;
/* pad_to_size was once a reserved field, so sanitize it */
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c
index 56c7f86..47c3025 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -1757,7 +1757,7 @@ static void gen6_dump_ppgtt(struct i915_hw_ppgtt *base, struct seq_file *m)
if (i == 4)
continue;
- seq_printf(m, "\t\t(%03d, %04d) %08lx: ",
+ seq_printf(m, "\t\t(%03d, %04d) %08llx: ",
pde, pte,
(pde * GEN6_PTES + pte) * I915_GTT_PAGE_SIZE);
for (i = 0; i < 4; i++) {
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.h b/drivers/gpu/drm/i915/i915_gem_gtt.h
index 7e2af5f..2803929 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.h
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.h
@@ -42,13 +42,15 @@
#include "i915_selftest.h"
#include "i915_timeline.h"
-#define I915_GTT_PAGE_SIZE_4K BIT(12)
-#define I915_GTT_PAGE_SIZE_64K BIT(16)
-#define I915_GTT_PAGE_SIZE_2M BIT(21)
+#define I915_GTT_PAGE_SIZE_4K BIT_ULL(12)
+#define I915_GTT_PAGE_SIZE_64K BIT_ULL(16)
+#define I915_GTT_PAGE_SIZE_2M BIT_ULL(21)
#define I915_GTT_PAGE_SIZE I915_GTT_PAGE_SIZE_4K
#define I915_GTT_MAX_PAGE_SIZE I915_GTT_PAGE_SIZE_2M
+#define I915_GTT_PAGE_MASK -I915_GTT_PAGE_SIZE
+
#define I915_GTT_MIN_ALIGNMENT I915_GTT_PAGE_SIZE
#define I915_FENCE_REG_NONE -1
@@ -659,20 +661,20 @@ int i915_gem_gtt_insert(struct i915_address_space *vm,
u64 start, u64 end, unsigned int flags);
/* Flags used by pin/bind&friends. */
-#define PIN_NONBLOCK BIT(0)
-#define PIN_MAPPABLE BIT(1)
-#define PIN_ZONE_4G BIT(2)
-#define PIN_NONFAULT BIT(3)
-#define PIN_NOEVICT BIT(4)
+#define PIN_NONBLOCK BIT_ULL(0)
+#define PIN_MAPPABLE BIT_ULL(1)
+#define PIN_ZONE_4G BIT_ULL(2)
+#define PIN_NONFAULT BIT_ULL(3)
+#define PIN_NOEVICT BIT_ULL(4)
-#define PIN_MBZ BIT(5) /* I915_VMA_PIN_OVERFLOW */
-#define PIN_GLOBAL BIT(6) /* I915_VMA_GLOBAL_BIND */
-#define PIN_USER BIT(7) /* I915_VMA_LOCAL_BIND */
-#define PIN_UPDATE BIT(8)
+#define PIN_MBZ BIT_ULL(5) /* I915_VMA_PIN_OVERFLOW */
+#define PIN_GLOBAL BIT_ULL(6) /* I915_VMA_GLOBAL_BIND */
+#define PIN_USER BIT_ULL(7) /* I915_VMA_LOCAL_BIND */
+#define PIN_UPDATE BIT_ULL(8)
-#define PIN_HIGH BIT(9)
-#define PIN_OFFSET_BIAS BIT(10)
-#define PIN_OFFSET_FIXED BIT(11)
+#define PIN_HIGH BIT_ULL(9)
+#define PIN_OFFSET_BIAS BIT_ULL(10)
+#define PIN_OFFSET_FIXED BIT_ULL(11)
#define PIN_OFFSET_MASK (-I915_GTT_PAGE_SIZE)
#endif
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 7c491ea..e31c27e 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2095,8 +2095,12 @@ enum i915_power_well_id {
/* ICL PHY DFLEX registers */
#define PORT_TX_DFLEXDPMLE1 _MMIO(0x1638C0)
-#define DFLEXDPMLE1_DPMLETC_MASK(n) (0xf << (4 * (n)))
-#define DFLEXDPMLE1_DPMLETC(n, x) ((x) << (4 * (n)))
+#define DFLEXDPMLE1_DPMLETC_MASK(tc_port) (0xf << (4 * (tc_port)))
+#define DFLEXDPMLE1_DPMLETC_ML0(tc_port) (1 << (4 * (tc_port)))
+#define DFLEXDPMLE1_DPMLETC_ML1_0(tc_port) (3 << (4 * (tc_port)))
+#define DFLEXDPMLE1_DPMLETC_ML3(tc_port) (8 << (4 * (tc_port)))
+#define DFLEXDPMLE1_DPMLETC_ML3_2(tc_port) (12 << (4 * (tc_port)))
+#define DFLEXDPMLE1_DPMLETC_ML3_0(tc_port) (15 << (4 * (tc_port)))
/* BXT PHY Ref registers */
#define _PORT_REF_DW3_A 0x16218C
@@ -4593,12 +4597,12 @@ enum {
#define DRM_DIP_ENABLE (1 << 28)
#define PSR_VSC_BIT_7_SET (1 << 27)
-#define VSC_SELECT_MASK (0x3 << 26)
-#define VSC_SELECT_SHIFT 26
-#define VSC_DIP_HW_HEA_DATA (0 << 26)
-#define VSC_DIP_HW_HEA_SW_DATA (1 << 26)
-#define VSC_DIP_HW_DATA_SW_HEA (2 << 26)
-#define VSC_DIP_SW_HEA_DATA (3 << 26)
+#define VSC_SELECT_MASK (0x3 << 25)
+#define VSC_SELECT_SHIFT 25
+#define VSC_DIP_HW_HEA_DATA (0 << 25)
+#define VSC_DIP_HW_HEA_SW_DATA (1 << 25)
+#define VSC_DIP_HW_DATA_SW_HEA (2 << 25)
+#define VSC_DIP_SW_HEA_DATA (3 << 25)
#define VDIP_ENABLE_PPS (1 << 24)
/* Panel power sequencing */
diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
index 769f3f5..ee3ca2d 100644
--- a/drivers/gpu/drm/i915/intel_audio.c
+++ b/drivers/gpu/drm/i915/intel_audio.c
@@ -144,6 +144,9 @@ static const struct {
/* HDMI N/CTS table */
#define TMDS_297M 297000
#define TMDS_296M 296703
+#define TMDS_594M 594000
+#define TMDS_593M 593407
+
static const struct {
int sample_rate;
int clock;
@@ -164,6 +167,20 @@ static const struct {
{ 176400, TMDS_297M, 18816, 247500 },
{ 192000, TMDS_296M, 23296, 281250 },
{ 192000, TMDS_297M, 20480, 247500 },
+ { 44100, TMDS_593M, 8918, 937500 },
+ { 44100, TMDS_594M, 9408, 990000 },
+ { 48000, TMDS_593M, 5824, 562500 },
+ { 48000, TMDS_594M, 6144, 594000 },
+ { 32000, TMDS_593M, 5824, 843750 },
+ { 32000, TMDS_594M, 3072, 445500 },
+ { 88200, TMDS_593M, 17836, 937500 },
+ { 88200, TMDS_594M, 18816, 990000 },
+ { 96000, TMDS_593M, 11648, 562500 },
+ { 96000, TMDS_594M, 12288, 594000 },
+ { 176400, TMDS_593M, 35672, 937500 },
+ { 176400, TMDS_594M, 37632, 990000 },
+ { 192000, TMDS_593M, 23296, 562500 },
+ { 192000, TMDS_594M, 24576, 594000 },
};
/* get AUD_CONFIG_PIXEL_CLOCK_HDMI_* value for mode */
diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index 29075c7..8d742760 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -2138,16 +2138,8 @@ void intel_set_cdclk(struct drm_i915_private *dev_priv,
static int intel_pixel_rate_to_cdclk(struct drm_i915_private *dev_priv,
int pixel_rate)
{
- if (INTEL_GEN(dev_priv) >= 10)
+ if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
return DIV_ROUND_UP(pixel_rate, 2);
- else if (IS_GEMINILAKE(dev_priv))
- /*
- * FIXME: Avoid using a pixel clock that is more than 99% of the cdclk
- * as a temporary workaround. Use a higher cdclk instead. (Note that
- * intel_compute_max_dotclk() limits the max pixel clock to 99% of max
- * cdclk.)
- */
- return DIV_ROUND_UP(pixel_rate * 100, 2 * 99);
else if (IS_GEN9(dev_priv) ||
IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
return pixel_rate;
@@ -2543,14 +2535,8 @@ static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv)
{
int max_cdclk_freq = dev_priv->max_cdclk_freq;
- if (INTEL_GEN(dev_priv) >= 10)
+ if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
return 2 * max_cdclk_freq;
- else if (IS_GEMINILAKE(dev_priv))
- /*
- * FIXME: Limiting to 99% as a temporary workaround. See
- * intel_min_cdclk() for details.
- */
- return 2 * max_cdclk_freq * 99 / 100;
else if (IS_GEN9(dev_priv) ||
IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
return max_cdclk_freq;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 9741cc4..23d8008 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -12768,17 +12768,12 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
intel_check_cpu_fifo_underruns(dev_priv);
intel_check_pch_fifo_underruns(dev_priv);
- if (!new_crtc_state->active) {
- /*
- * Make sure we don't call initial_watermarks
- * for ILK-style watermark updates.
- *
- * No clue what this is supposed to achieve.
- */
- if (INTEL_GEN(dev_priv) >= 9)
- dev_priv->display.initial_watermarks(intel_state,
- to_intel_crtc_state(new_crtc_state));
- }
+ /* FIXME unify this for all platforms */
+ if (!new_crtc_state->active &&
+ !HAS_GMCH_DISPLAY(dev_priv) &&
+ dev_priv->display.initial_watermarks)
+ dev_priv->display.initial_watermarks(intel_state,
+ to_intel_crtc_state(new_crtc_state));
}
}
@@ -14646,7 +14641,7 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
fb->height < SKL_MIN_YUV_420_SRC_H ||
(fb->width % 4) != 0 || (fb->height % 4) != 0)) {
DRM_DEBUG_KMS("src dimensions not correct for NV12\n");
- return -EINVAL;
+ goto err;
}
for (i = 0; i < fb->format->num_planes; i++) {
diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c
index cdf1955..5d5336f 100644
--- a/drivers/gpu/drm/i915/intel_lpe_audio.c
+++ b/drivers/gpu/drm/i915/intel_lpe_audio.c
@@ -297,8 +297,10 @@ void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv)
lpe_audio_platdev_destroy(dev_priv);
irq_free_desc(dev_priv->lpe_audio.irq);
-}
+ dev_priv->lpe_audio.irq = -1;
+ dev_priv->lpe_audio.platdev = NULL;
+}
/**
* intel_lpe_audio_notify() - notify lpe audio event
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 1db9b832..245f002 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2881,8 +2881,7 @@ static void intel_read_wm_latency(struct drm_i915_private *dev_priv,
* any underrun. If not able to get Dimm info assume 16GB dimm
* to avoid any underrun.
*/
- if (!dev_priv->dram_info.valid_dimm ||
- dev_priv->dram_info.is_16gb_dimm)
+ if (dev_priv->dram_info.is_16gb_dimm)
wm[0] += 1;
} else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
diff --git a/drivers/gpu/drm/i915/selftests/huge_pages.c b/drivers/gpu/drm/i915/selftests/huge_pages.c
index 8d03f64..5c22f2c 100644
--- a/drivers/gpu/drm/i915/selftests/huge_pages.c
+++ b/drivers/gpu/drm/i915/selftests/huge_pages.c
@@ -551,7 +551,7 @@ static int igt_mock_ppgtt_misaligned_dma(void *arg)
err = igt_check_page_sizes(vma);
if (vma->page_sizes.gtt != I915_GTT_PAGE_SIZE_4K) {
- pr_err("page_sizes.gtt=%u, expected %lu\n",
+ pr_err("page_sizes.gtt=%u, expected %llu\n",
vma->page_sizes.gtt, I915_GTT_PAGE_SIZE_4K);
err = -EINVAL;
}
diff --git a/drivers/gpu/drm/i915/selftests/i915_gem_gtt.c b/drivers/gpu/drm/i915/selftests/i915_gem_gtt.c
index 8e2e269..127d815 100644
--- a/drivers/gpu/drm/i915/selftests/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/selftests/i915_gem_gtt.c
@@ -1337,7 +1337,7 @@ static int igt_gtt_reserve(void *arg)
GEM_BUG_ON(!drm_mm_node_allocated(&vma->node));
if (vma->node.start != total ||
vma->node.size != 2*I915_GTT_PAGE_SIZE) {
- pr_err("i915_gem_gtt_reserve (pass 1) placement failed, found (%llx + %llx), expected (%llx + %lx)\n",
+ pr_err("i915_gem_gtt_reserve (pass 1) placement failed, found (%llx + %llx), expected (%llx + %llx)\n",
vma->node.start, vma->node.size,
total, 2*I915_GTT_PAGE_SIZE);
err = -EINVAL;
@@ -1386,7 +1386,7 @@ static int igt_gtt_reserve(void *arg)
GEM_BUG_ON(!drm_mm_node_allocated(&vma->node));
if (vma->node.start != total ||
vma->node.size != 2*I915_GTT_PAGE_SIZE) {
- pr_err("i915_gem_gtt_reserve (pass 2) placement failed, found (%llx + %llx), expected (%llx + %lx)\n",
+ pr_err("i915_gem_gtt_reserve (pass 2) placement failed, found (%llx + %llx), expected (%llx + %llx)\n",
vma->node.start, vma->node.size,
total, 2*I915_GTT_PAGE_SIZE);
err = -EINVAL;
@@ -1430,7 +1430,7 @@ static int igt_gtt_reserve(void *arg)
GEM_BUG_ON(!drm_mm_node_allocated(&vma->node));
if (vma->node.start != offset ||
vma->node.size != 2*I915_GTT_PAGE_SIZE) {
- pr_err("i915_gem_gtt_reserve (pass 3) placement failed, found (%llx + %llx), expected (%llx + %lx)\n",
+ pr_err("i915_gem_gtt_reserve (pass 3) placement failed, found (%llx + %llx), expected (%llx + %llx)\n",
vma->node.start, vma->node.size,
offset, 2*I915_GTT_PAGE_SIZE);
err = -EINVAL;
diff --git a/drivers/gpu/drm/sun4i/sun4i_lvds.c b/drivers/gpu/drm/sun4i/sun4i_lvds.c
index af7dcb6..e7eb0d1 100644
--- a/drivers/gpu/drm/sun4i/sun4i_lvds.c
+++ b/drivers/gpu/drm/sun4i/sun4i_lvds.c
@@ -75,7 +75,7 @@ static void sun4i_lvds_encoder_enable(struct drm_encoder *encoder)
DRM_DEBUG_DRIVER("Enabling LVDS output\n");
- if (!IS_ERR(tcon->panel)) {
+ if (tcon->panel) {
drm_panel_prepare(tcon->panel);
drm_panel_enable(tcon->panel);
}
@@ -88,7 +88,7 @@ static void sun4i_lvds_encoder_disable(struct drm_encoder *encoder)
DRM_DEBUG_DRIVER("Disabling LVDS output\n");
- if (!IS_ERR(tcon->panel)) {
+ if (tcon->panel) {
drm_panel_disable(tcon->panel);
drm_panel_unprepare(tcon->panel);
}
diff --git a/drivers/gpu/drm/sun4i/sun4i_rgb.c b/drivers/gpu/drm/sun4i/sun4i_rgb.c
index bf068da..f4a2268 100644
--- a/drivers/gpu/drm/sun4i/sun4i_rgb.c
+++ b/drivers/gpu/drm/sun4i/sun4i_rgb.c
@@ -135,7 +135,7 @@ static void sun4i_rgb_encoder_enable(struct drm_encoder *encoder)
DRM_DEBUG_DRIVER("Enabling RGB output\n");
- if (!IS_ERR(tcon->panel)) {
+ if (tcon->panel) {
drm_panel_prepare(tcon->panel);
drm_panel_enable(tcon->panel);
}
@@ -148,7 +148,7 @@ static void sun4i_rgb_encoder_disable(struct drm_encoder *encoder)
DRM_DEBUG_DRIVER("Disabling RGB output\n");
- if (!IS_ERR(tcon->panel)) {
+ if (tcon->panel) {
drm_panel_disable(tcon->panel);
drm_panel_unprepare(tcon->panel);
}
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index c78cd35a..f949287 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -491,7 +491,8 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
sun4i_tcon0_mode_set_common(tcon, mode);
/* Set dithering if needed */
- sun4i_tcon0_mode_set_dithering(tcon, tcon->panel->connector);
+ if (tcon->panel)
+ sun4i_tcon0_mode_set_dithering(tcon, tcon->panel->connector);
/* Adjust clock delay */
clk_delay = sun4i_tcon_get_clk_delay(mode, 0);
@@ -555,7 +556,7 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
* Following code is a way to avoid quirks all around TCON
* and DOTCLOCK drivers.
*/
- if (!IS_ERR(tcon->panel)) {
+ if (tcon->panel) {
struct drm_panel *panel = tcon->panel;
struct drm_connector *connector = panel->connector;
struct drm_display_info display_info = connector->display_info;
diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c
index cf2a185..a132c37 100644
--- a/drivers/gpu/vga/vga_switcheroo.c
+++ b/drivers/gpu/vga/vga_switcheroo.c
@@ -380,6 +380,9 @@ int vga_switcheroo_register_audio_client(struct pci_dev *pdev,
mutex_unlock(&vgasr_mutex);
return -EINVAL;
}
+ /* notify if GPU has been already bound */
+ if (ops->gpu_bound)
+ ops->gpu_bound(pdev, id);
}
mutex_unlock(&vgasr_mutex);
diff --git a/drivers/hid/hid-alps.c b/drivers/hid/hid-alps.c
index aec253b..3cd7229 100644
--- a/drivers/hid/hid-alps.c
+++ b/drivers/hid/hid-alps.c
@@ -660,6 +660,20 @@ static int T4_init(struct hid_device *hdev, struct alps_dev *pri_data)
return ret;
}
+static int alps_sp_open(struct input_dev *dev)
+{
+ struct hid_device *hid = input_get_drvdata(dev);
+
+ return hid_hw_open(hid);
+}
+
+static void alps_sp_close(struct input_dev *dev)
+{
+ struct hid_device *hid = input_get_drvdata(dev);
+
+ hid_hw_close(hid);
+}
+
static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi)
{
struct alps_dev *data = hid_get_drvdata(hdev);
@@ -733,6 +747,10 @@ static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi)
input2->id.version = input->id.version;
input2->dev.parent = input->dev.parent;
+ input_set_drvdata(input2, hdev);
+ input2->open = alps_sp_open;
+ input2->close = alps_sp_close;
+
__set_bit(EV_KEY, input2->evbit);
data->sp_btn_cnt = (data->sp_btn_info & 0x0F);
for (i = 0; i < data->sp_btn_cnt; i++)
diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c
index dc6d647..a1fa2fc 100644
--- a/drivers/hid/hid-asus.c
+++ b/drivers/hid/hid-asus.c
@@ -359,6 +359,9 @@ static bool asus_kbd_wmi_led_control_present(struct hid_device *hdev)
u32 value;
int ret;
+ if (!IS_ENABLED(CONFIG_ASUS_WMI))
+ return false;
+
ret = asus_wmi_evaluate_method(ASUS_WMI_METHODID_DSTS2,
ASUS_WMI_DEVID_KBD_BACKLIGHT, 0, &value);
hid_dbg(hdev, "WMI backlight check: rc %d value %x", ret, value);
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index f63489c..c0d6689 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -927,6 +927,9 @@
#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3003 0x3003
#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008 0x3008
+#define I2C_VENDOR_ID_RAYDIUM 0x2386
+#define I2C_PRODUCT_ID_RAYDIUM_4B33 0x4b33
+
#define USB_VENDOR_ID_RAZER 0x1532
#define USB_DEVICE_ID_RAZER_BLADE_14 0x011D
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index 52c3b01..8237dd8 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -107,7 +107,6 @@ static const struct hid_device_id hid_quirks[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOUSE_C05A), HID_QUIRK_ALWAYS_POLL },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOUSE_C06A), HID_QUIRK_ALWAYS_POLL },
{ HID_USB_DEVICE(USB_VENDOR_ID_MCS, USB_DEVICE_ID_MCS_GAMEPADBLOCK), HID_QUIRK_MULTI_INPUT },
- { HID_USB_DEVICE(USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS), HID_QUIRK_NOGET },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER), HID_QUIRK_NO_INIT_REPORTS },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_SURFACE_PRO_2), HID_QUIRK_NO_INIT_REPORTS },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TOUCH_COVER_2), HID_QUIRK_NO_INIT_REPORTS },
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 4aab96c..3cde7c1 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -49,6 +49,7 @@
#define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV BIT(0)
#define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(1)
#define I2C_HID_QUIRK_NO_RUNTIME_PM BIT(2)
+#define I2C_HID_QUIRK_DELAY_AFTER_SLEEP BIT(3)
/* flags */
#define I2C_HID_STARTED 0
@@ -158,6 +159,8 @@ struct i2c_hid {
bool irq_wake_enabled;
struct mutex reset_lock;
+
+ unsigned long sleep_delay;
};
static const struct i2c_hid_quirks {
@@ -172,6 +175,8 @@ static const struct i2c_hid_quirks {
{ I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288,
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET |
I2C_HID_QUIRK_NO_RUNTIME_PM },
+ { I2C_VENDOR_ID_RAYDIUM, I2C_PRODUCT_ID_RAYDIUM_4B33,
+ I2C_HID_QUIRK_DELAY_AFTER_SLEEP },
{ 0, 0 }
};
@@ -387,6 +392,7 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state)
{
struct i2c_hid *ihid = i2c_get_clientdata(client);
int ret;
+ unsigned long now, delay;
i2c_hid_dbg(ihid, "%s\n", __func__);
@@ -404,9 +410,22 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state)
goto set_pwr_exit;
}
+ if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP &&
+ power_state == I2C_HID_PWR_ON) {
+ now = jiffies;
+ if (time_after(ihid->sleep_delay, now)) {
+ delay = jiffies_to_usecs(ihid->sleep_delay - now);
+ usleep_range(delay, delay + 1);
+ }
+ }
+
ret = __i2c_hid_command(client, &hid_set_power_cmd, power_state,
0, NULL, 0, NULL, 0);
+ if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP &&
+ power_state == I2C_HID_PWR_SLEEP)
+ ihid->sleep_delay = jiffies + msecs_to_jiffies(20);
+
if (ret)
dev_err(&client->dev, "failed to change power setting.\n");
diff --git a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
index cac262a..89f2976 100644
--- a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
+++ b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
@@ -331,6 +331,14 @@ static const struct dmi_system_id i2c_hid_dmi_desc_override_table[] = {
.driver_data = (void *)&sipodev_desc
},
{
+ .ident = "Direkt-Tek DTLAPY133-1",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Direkt-Tek"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "DTLAPY133-1"),
+ },
+ .driver_data = (void *)&sipodev_desc
+ },
+ {
.ident = "Mediacom Flexbook Edge 11",
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "MEDIACOM"),
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index 23872d0..a746017 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -512,14 +512,24 @@ static noinline int hiddev_ioctl_usage(struct hiddev *hiddev, unsigned int cmd,
if (cmd == HIDIOCGCOLLECTIONINDEX) {
if (uref->usage_index >= field->maxusage)
goto inval;
+ uref->usage_index =
+ array_index_nospec(uref->usage_index,
+ field->maxusage);
} else if (uref->usage_index >= field->report_count)
goto inval;
}
- if ((cmd == HIDIOCGUSAGES || cmd == HIDIOCSUSAGES) &&
- (uref_multi->num_values > HID_MAX_MULTI_USAGES ||
- uref->usage_index + uref_multi->num_values > field->report_count))
- goto inval;
+ if (cmd == HIDIOCGUSAGES || cmd == HIDIOCSUSAGES) {
+ if (uref_multi->num_values > HID_MAX_MULTI_USAGES ||
+ uref->usage_index + uref_multi->num_values >
+ field->report_count)
+ goto inval;
+
+ uref->usage_index =
+ array_index_nospec(uref->usage_index,
+ field->report_count -
+ uref_multi->num_values);
+ }
switch (cmd) {
case HIDIOCGUSAGE:
diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
index 975c951..84f61ce 100644
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -649,8 +649,10 @@ __hwmon_device_register(struct device *dev, const char *name, void *drvdata,
if (info[i]->config[j] & HWMON_T_INPUT) {
err = hwmon_thermal_add_sensor(dev,
hwdev, j);
- if (err)
- goto free_device;
+ if (err) {
+ device_unregister(hdev);
+ goto ida_remove;
+ }
}
}
}
@@ -658,8 +660,6 @@ __hwmon_device_register(struct device *dev, const char *name, void *drvdata,
return hdev;
-free_device:
- device_unregister(hdev);
free_hwmon:
kfree(hwdev);
ida_remove:
diff --git a/drivers/hwmon/ibmpowernv.c b/drivers/hwmon/ibmpowernv.c
index 0ccca87..293dd1c 100644
--- a/drivers/hwmon/ibmpowernv.c
+++ b/drivers/hwmon/ibmpowernv.c
@@ -181,7 +181,7 @@ static ssize_t show_label(struct device *dev, struct device_attribute *devattr,
return sprintf(buf, "%s\n", sdata->label);
}
-static int __init get_logical_cpu(int hwcpu)
+static int get_logical_cpu(int hwcpu)
{
int cpu;
@@ -192,9 +192,8 @@ static int __init get_logical_cpu(int hwcpu)
return -ENOENT;
}
-static void __init make_sensor_label(struct device_node *np,
- struct sensor_data *sdata,
- const char *label)
+static void make_sensor_label(struct device_node *np,
+ struct sensor_data *sdata, const char *label)
{
u32 id;
size_t n;
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 56ccb1e..f2c6819 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -224,6 +224,15 @@
This driver can also be built as a module. If so, the module
will be called i2c-nforce2-s4985.
+config I2C_NVIDIA_GPU
+ tristate "NVIDIA GPU I2C controller"
+ depends on PCI
+ help
+ If you say yes to this option, support will be included for the
+ NVIDIA GPU I2C controller which is used to communicate with the GPU's
+ Type-C controller. This driver can also be built as a module called
+ i2c-nvidia-gpu.
+
config I2C_SIS5595
tristate "SiS 5595"
depends on PCI
@@ -752,7 +761,7 @@
config I2C_OMAP
tristate "OMAP I2C adapter"
- depends on ARCH_OMAP
+ depends on ARCH_OMAP || ARCH_K3
default y if MACH_OMAP_H3 || MACH_OMAP_OSK
help
If you say yes to this option, support will be included for the
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 18b26af..5f0cb69 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -19,6 +19,7 @@
obj-$(CONFIG_I2C_ISMT) += i2c-ismt.o
obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o
obj-$(CONFIG_I2C_NFORCE2_S4985) += i2c-nforce2-s4985.o
+obj-$(CONFIG_I2C_NVIDIA_GPU) += i2c-nvidia-gpu.o
obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o
obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o
diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c
new file mode 100644
index 0000000..8822357
--- /dev/null
+++ b/drivers/i2c/busses/i2c-nvidia-gpu.c
@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Nvidia GPU I2C controller Driver
+ *
+ * Copyright (C) 2018 NVIDIA Corporation. All rights reserved.
+ * Author: Ajay Gupta <[email protected]>
+ */
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+
+#include <asm/unaligned.h>
+
+/* I2C definitions */
+#define I2C_MST_CNTL 0x00
+#define I2C_MST_CNTL_GEN_START BIT(0)
+#define I2C_MST_CNTL_GEN_STOP BIT(1)
+#define I2C_MST_CNTL_CMD_READ (1 << 2)
+#define I2C_MST_CNTL_CMD_WRITE (2 << 2)
+#define I2C_MST_CNTL_BURST_SIZE_SHIFT 6
+#define I2C_MST_CNTL_GEN_NACK BIT(28)
+#define I2C_MST_CNTL_STATUS GENMASK(30, 29)
+#define I2C_MST_CNTL_STATUS_OKAY (0 << 29)
+#define I2C_MST_CNTL_STATUS_NO_ACK (1 << 29)
+#define I2C_MST_CNTL_STATUS_TIMEOUT (2 << 29)
+#define I2C_MST_CNTL_STATUS_BUS_BUSY (3 << 29)
+#define I2C_MST_CNTL_CYCLE_TRIGGER BIT(31)
+
+#define I2C_MST_ADDR 0x04
+
+#define I2C_MST_I2C0_TIMING 0x08
+#define I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ 0x10e
+#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT 16
+#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX 255
+#define I2C_MST_I2C0_TIMING_TIMEOUT_CHECK BIT(24)
+
+#define I2C_MST_DATA 0x0c
+
+#define I2C_MST_HYBRID_PADCTL 0x20
+#define I2C_MST_HYBRID_PADCTL_MODE_I2C BIT(0)
+#define I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV BIT(14)
+#define I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV BIT(15)
+
+struct gpu_i2c_dev {
+ struct device *dev;
+ void __iomem *regs;
+ struct i2c_adapter adapter;
+ struct i2c_board_info *gpu_ccgx_ucsi;
+};
+
+static void gpu_enable_i2c_bus(struct gpu_i2c_dev *i2cd)
+{
+ u32 val;
+
+ /* enable I2C */
+ val = readl(i2cd->regs + I2C_MST_HYBRID_PADCTL);
+ val |= I2C_MST_HYBRID_PADCTL_MODE_I2C |
+ I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV |
+ I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV;
+ writel(val, i2cd->regs + I2C_MST_HYBRID_PADCTL);
+
+ /* enable 100KHZ mode */
+ val = I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ;
+ val |= (I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX
+ << I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT);
+ val |= I2C_MST_I2C0_TIMING_TIMEOUT_CHECK;
+ writel(val, i2cd->regs + I2C_MST_I2C0_TIMING);
+}
+
+static int gpu_i2c_check_status(struct gpu_i2c_dev *i2cd)
+{
+ unsigned long target = jiffies + msecs_to_jiffies(1000);
+ u32 val;
+
+ do {
+ val = readl(i2cd->regs + I2C_MST_CNTL);
+ if (!(val & I2C_MST_CNTL_CYCLE_TRIGGER))
+ break;
+ if ((val & I2C_MST_CNTL_STATUS) !=
+ I2C_MST_CNTL_STATUS_BUS_BUSY)
+ break;
+ usleep_range(500, 600);
+ } while (time_is_after_jiffies(target));
+
+ if (time_is_before_jiffies(target)) {
+ dev_err(i2cd->dev, "i2c timeout error %x\n", val);
+ return -ETIME;
+ }
+
+ val = readl(i2cd->regs + I2C_MST_CNTL);
+ switch (val & I2C_MST_CNTL_STATUS) {
+ case I2C_MST_CNTL_STATUS_OKAY:
+ return 0;
+ case I2C_MST_CNTL_STATUS_NO_ACK:
+ return -EIO;
+ case I2C_MST_CNTL_STATUS_TIMEOUT:
+ return -ETIME;
+ default:
+ return 0;
+ }
+}
+
+static int gpu_i2c_read(struct gpu_i2c_dev *i2cd, u8 *data, u16 len)
+{
+ int status;
+ u32 val;
+
+ val = I2C_MST_CNTL_GEN_START | I2C_MST_CNTL_CMD_READ |
+ (len << I2C_MST_CNTL_BURST_SIZE_SHIFT) |
+ I2C_MST_CNTL_CYCLE_TRIGGER | I2C_MST_CNTL_GEN_NACK;
+ writel(val, i2cd->regs + I2C_MST_CNTL);
+
+ status = gpu_i2c_check_status(i2cd);
+ if (status < 0)
+ return status;
+
+ val = readl(i2cd->regs + I2C_MST_DATA);
+ switch (len) {
+ case 1:
+ data[0] = val;
+ break;
+ case 2:
+ put_unaligned_be16(val, data);
+ break;
+ case 3:
+ put_unaligned_be16(val >> 8, data);
+ data[2] = val;
+ break;
+ case 4:
+ put_unaligned_be32(val, data);
+ break;
+ default:
+ break;
+ }
+ return status;
+}
+
+static int gpu_i2c_start(struct gpu_i2c_dev *i2cd)
+{
+ writel(I2C_MST_CNTL_GEN_START, i2cd->regs + I2C_MST_CNTL);
+ return gpu_i2c_check_status(i2cd);
+}
+
+static int gpu_i2c_stop(struct gpu_i2c_dev *i2cd)
+{
+ writel(I2C_MST_CNTL_GEN_STOP, i2cd->regs + I2C_MST_CNTL);
+ return gpu_i2c_check_status(i2cd);
+}
+
+static int gpu_i2c_write(struct gpu_i2c_dev *i2cd, u8 data)
+{
+ u32 val;
+
+ writel(data, i2cd->regs + I2C_MST_DATA);
+
+ val = I2C_MST_CNTL_CMD_WRITE | (1 << I2C_MST_CNTL_BURST_SIZE_SHIFT);
+ writel(val, i2cd->regs + I2C_MST_CNTL);
+
+ return gpu_i2c_check_status(i2cd);
+}
+
+static int gpu_i2c_master_xfer(struct i2c_adapter *adap,
+ struct i2c_msg *msgs, int num)
+{
+ struct gpu_i2c_dev *i2cd = i2c_get_adapdata(adap);
+ int status, status2;
+ int i, j;
+
+ /*
+ * The controller supports maximum 4 byte read due to known
+ * limitation of sending STOP after every read.
+ */
+ for (i = 0; i < num; i++) {
+ if (msgs[i].flags & I2C_M_RD) {
+ /* program client address before starting read */
+ writel(msgs[i].addr, i2cd->regs + I2C_MST_ADDR);
+ /* gpu_i2c_read has implicit start */
+ status = gpu_i2c_read(i2cd, msgs[i].buf, msgs[i].len);
+ if (status < 0)
+ goto stop;
+ } else {
+ u8 addr = i2c_8bit_addr_from_msg(msgs + i);
+
+ status = gpu_i2c_start(i2cd);
+ if (status < 0) {
+ if (i == 0)
+ return status;
+ goto stop;
+ }
+
+ status = gpu_i2c_write(i2cd, addr);
+ if (status < 0)
+ goto stop;
+
+ for (j = 0; j < msgs[i].len; j++) {
+ status = gpu_i2c_write(i2cd, msgs[i].buf[j]);
+ if (status < 0)
+ goto stop;
+ }
+ }
+ }
+ status = gpu_i2c_stop(i2cd);
+ if (status < 0)
+ return status;
+
+ return i;
+stop:
+ status2 = gpu_i2c_stop(i2cd);
+ if (status2 < 0)
+ dev_err(i2cd->dev, "i2c stop failed %d\n", status2);
+ return status;
+}
+
+static const struct i2c_adapter_quirks gpu_i2c_quirks = {
+ .max_read_len = 4,
+ .flags = I2C_AQ_COMB_WRITE_THEN_READ,
+};
+
+static u32 gpu_i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm gpu_i2c_algorithm = {
+ .master_xfer = gpu_i2c_master_xfer,
+ .functionality = gpu_i2c_functionality,
+};
+
+/*
+ * This driver is for Nvidia GPU cards with USB Type-C interface.
+ * We want to identify the cards using vendor ID and class code only
+ * to avoid dependency of adding product id for any new card which
+ * requires this driver.
+ * Currently there is no class code defined for UCSI device over PCI
+ * so using UNKNOWN class for now and it will be updated when UCSI
+ * over PCI gets a class code.
+ * There is no other NVIDIA cards with UNKNOWN class code. Even if the
+ * driver gets loaded for an undesired card then eventually i2c_read()
+ * (initiated from UCSI i2c_client) will timeout or UCSI commands will
+ * timeout.
+ */
+#define PCI_CLASS_SERIAL_UNKNOWN 0x0c80
+static const struct pci_device_id gpu_i2c_ids[] = {
+ { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_SERIAL_UNKNOWN << 8, 0xffffff00},
+ { }
+};
+MODULE_DEVICE_TABLE(pci, gpu_i2c_ids);
+
+static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq)
+{
+ struct i2c_client *ccgx_client;
+
+ i2cd->gpu_ccgx_ucsi = devm_kzalloc(i2cd->dev,
+ sizeof(*i2cd->gpu_ccgx_ucsi),
+ GFP_KERNEL);
+ if (!i2cd->gpu_ccgx_ucsi)
+ return -ENOMEM;
+
+ strlcpy(i2cd->gpu_ccgx_ucsi->type, "ccgx-ucsi",
+ sizeof(i2cd->gpu_ccgx_ucsi->type));
+ i2cd->gpu_ccgx_ucsi->addr = 0x8;
+ i2cd->gpu_ccgx_ucsi->irq = irq;
+ ccgx_client = i2c_new_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi);
+ if (!ccgx_client)
+ return -ENODEV;
+
+ return 0;
+}
+
+static int gpu_i2c_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct gpu_i2c_dev *i2cd;
+ int status;
+
+ i2cd = devm_kzalloc(&pdev->dev, sizeof(*i2cd), GFP_KERNEL);
+ if (!i2cd)
+ return -ENOMEM;
+
+ i2cd->dev = &pdev->dev;
+ dev_set_drvdata(&pdev->dev, i2cd);
+
+ status = pcim_enable_device(pdev);
+ if (status < 0) {
+ dev_err(&pdev->dev, "pcim_enable_device failed %d\n", status);
+ return status;
+ }
+
+ pci_set_master(pdev);
+
+ i2cd->regs = pcim_iomap(pdev, 0, 0);
+ if (!i2cd->regs) {
+ dev_err(&pdev->dev, "pcim_iomap failed\n");
+ return -ENOMEM;
+ }
+
+ status = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
+ if (status < 0) {
+ dev_err(&pdev->dev, "pci_alloc_irq_vectors err %d\n", status);
+ return status;
+ }
+
+ gpu_enable_i2c_bus(i2cd);
+
+ i2c_set_adapdata(&i2cd->adapter, i2cd);
+ i2cd->adapter.owner = THIS_MODULE;
+ strlcpy(i2cd->adapter.name, "NVIDIA GPU I2C adapter",
+ sizeof(i2cd->adapter.name));
+ i2cd->adapter.algo = &gpu_i2c_algorithm;
+ i2cd->adapter.quirks = &gpu_i2c_quirks;
+ i2cd->adapter.dev.parent = &pdev->dev;
+ status = i2c_add_adapter(&i2cd->adapter);
+ if (status < 0)
+ goto free_irq_vectors;
+
+ status = gpu_populate_client(i2cd, pdev->irq);
+ if (status < 0) {
+ dev_err(&pdev->dev, "gpu_populate_client failed %d\n", status);
+ goto del_adapter;
+ }
+
+ return 0;
+
+del_adapter:
+ i2c_del_adapter(&i2cd->adapter);
+free_irq_vectors:
+ pci_free_irq_vectors(pdev);
+ return status;
+}
+
+static void gpu_i2c_remove(struct pci_dev *pdev)
+{
+ struct gpu_i2c_dev *i2cd = dev_get_drvdata(&pdev->dev);
+
+ i2c_del_adapter(&i2cd->adapter);
+ pci_free_irq_vectors(pdev);
+}
+
+static int gpu_i2c_resume(struct device *dev)
+{
+ struct gpu_i2c_dev *i2cd = dev_get_drvdata(dev);
+
+ gpu_enable_i2c_bus(i2cd);
+ return 0;
+}
+
+static UNIVERSAL_DEV_PM_OPS(gpu_i2c_driver_pm, NULL, gpu_i2c_resume, NULL);
+
+static struct pci_driver gpu_i2c_driver = {
+ .name = "nvidia-gpu",
+ .id_table = gpu_i2c_ids,
+ .probe = gpu_i2c_probe,
+ .remove = gpu_i2c_remove,
+ .driver = {
+ .pm = &gpu_i2c_driver_pm,
+ },
+};
+
+module_pci_driver(gpu_i2c_driver);
+
+MODULE_AUTHOR("Ajay Gupta <[email protected]>");
+MODULE_DESCRIPTION("Nvidia GPU I2C controller Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 527f55c8..db075bc0 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -571,18 +571,19 @@ static int geni_i2c_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);
- ret = i2c_add_adapter(&gi2c->adap);
- if (ret) {
- dev_err(&pdev->dev, "Error adding i2c adapter %d\n", ret);
- return ret;
- }
-
gi2c->suspended = 1;
pm_runtime_set_suspended(gi2c->se.dev);
pm_runtime_set_autosuspend_delay(gi2c->se.dev, I2C_AUTO_SUSPEND_DELAY);
pm_runtime_use_autosuspend(gi2c->se.dev);
pm_runtime_enable(gi2c->se.dev);
+ ret = i2c_add_adapter(&gi2c->adap);
+ if (ret) {
+ dev_err(&pdev->dev, "Error adding i2c adapter %d\n", ret);
+ pm_runtime_disable(gi2c->se.dev);
+ return ret;
+ }
+
return 0;
}
@@ -590,8 +591,8 @@ static int geni_i2c_remove(struct platform_device *pdev)
{
struct geni_i2c_dev *gi2c = platform_get_drvdata(pdev);
- pm_runtime_disable(gi2c->se.dev);
i2c_del_adapter(&gi2c->adap);
+ pm_runtime_disable(gi2c->se.dev);
return 0;
}
diff --git a/drivers/leds/trigger/ledtrig-pattern.c b/drivers/leds/trigger/ledtrig-pattern.c
index ce7acd1..1870cf8 100644
--- a/drivers/leds/trigger/ledtrig-pattern.c
+++ b/drivers/leds/trigger/ledtrig-pattern.c
@@ -75,8 +75,6 @@ static void pattern_trig_timer_function(struct timer_list *t)
{
struct pattern_trig_data *data = from_timer(data, t, timer);
- mutex_lock(&data->lock);
-
for (;;) {
if (!data->is_indefinite && !data->repeat)
break;
@@ -87,9 +85,10 @@ static void pattern_trig_timer_function(struct timer_list *t)
data->curr->brightness);
mod_timer(&data->timer,
jiffies + msecs_to_jiffies(data->curr->delta_t));
-
- /* Skip the tuple with zero duration */
- pattern_trig_update_patterns(data);
+ if (!data->next->delta_t) {
+ /* Skip the tuple with zero duration */
+ pattern_trig_update_patterns(data);
+ }
/* Select next tuple */
pattern_trig_update_patterns(data);
} else {
@@ -116,8 +115,6 @@ static void pattern_trig_timer_function(struct timer_list *t)
break;
}
-
- mutex_unlock(&data->lock);
}
static int pattern_trig_start_pattern(struct led_classdev *led_cdev)
@@ -176,14 +173,10 @@ static ssize_t repeat_store(struct device *dev, struct device_attribute *attr,
if (res < -1 || res == 0)
return -EINVAL;
- /*
- * Clear previous patterns' performence firstly, and remove the timer
- * without mutex lock to avoid dead lock.
- */
- del_timer_sync(&data->timer);
-
mutex_lock(&data->lock);
+ del_timer_sync(&data->timer);
+
if (data->is_hw_pattern)
led_cdev->pattern_clear(led_cdev);
@@ -234,14 +227,10 @@ static ssize_t pattern_trig_store_patterns(struct led_classdev *led_cdev,
struct pattern_trig_data *data = led_cdev->trigger_data;
int ccount, cr, offset = 0, err = 0;
- /*
- * Clear previous patterns' performence firstly, and remove the timer
- * without mutex lock to avoid dead lock.
- */
- del_timer_sync(&data->timer);
-
mutex_lock(&data->lock);
+ del_timer_sync(&data->timer);
+
if (data->is_hw_pattern)
led_cdev->pattern_clear(led_cdev);
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index e514d57..aa98342 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -207,7 +207,7 @@
config MTD_DOCG3
tristate "M-Systems Disk-On-Chip G3"
select BCH
- select BCH_CONST_PARAMS
+ select BCH_CONST_PARAMS if !MTD_NAND_BCH
select BITREVERSE
help
This provides an MTD device driver for the M-Systems DiskOnChip
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index 784c6e1..fd5fe12 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -221,7 +221,14 @@ static struct sa_info *sa1100_setup_mtd(struct platform_device *pdev,
info->mtd = info->subdev[0].mtd;
ret = 0;
} else if (info->num_subdev > 1) {
- struct mtd_info *cdev[nr];
+ struct mtd_info **cdev;
+
+ cdev = kmalloc_array(nr, sizeof(*cdev), GFP_KERNEL);
+ if (!cdev) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
/*
* We detected multiple devices. Concatenate them together.
*/
@@ -230,6 +237,7 @@ static struct sa_info *sa1100_setup_mtd(struct platform_device *pdev,
info->mtd = mtd_concat_create(cdev, info->num_subdev,
plat->name);
+ kfree(cdev);
if (info->mtd == NULL) {
ret = -ENXIO;
goto err;
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 05bd077..71050a0 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -590,7 +590,6 @@ nand_get_device(struct mtd_info *mtd, int new_state)
/**
* panic_nand_wait - [GENERIC] wait until the command is done
- * @mtd: MTD device structure
* @chip: NAND chip structure
* @timeo: timeout
*
diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
index e24db81..d846428 100644
--- a/drivers/mtd/spi-nor/cadence-quadspi.c
+++ b/drivers/mtd/spi-nor/cadence-quadspi.c
@@ -996,7 +996,7 @@ static int cqspi_direct_read_execute(struct spi_nor *nor, u_char *buf,
err_unmap:
dma_unmap_single(nor->dev, dma_dst, len, DMA_FROM_DEVICE);
- return 0;
+ return ret;
}
static ssize_t cqspi_read(struct spi_nor *nor, loff_t from,
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 9407ca5..3e54e31 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -3250,12 +3250,14 @@ static int spi_nor_init_params(struct spi_nor *nor,
memcpy(&sfdp_params, params, sizeof(sfdp_params));
memcpy(&prev_map, &nor->erase_map, sizeof(prev_map));
- if (spi_nor_parse_sfdp(nor, &sfdp_params))
+ if (spi_nor_parse_sfdp(nor, &sfdp_params)) {
+ nor->addr_width = 0;
/* restore previous erase map */
memcpy(&nor->erase_map, &prev_map,
sizeof(nor->erase_map));
- else
+ } else {
memcpy(params, &sfdp_params, sizeof(*params));
+ }
}
return 0;
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index ffa37ad..333387f1 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3112,13 +3112,13 @@ static int bond_slave_netdev_event(unsigned long event,
case NETDEV_CHANGE:
/* For 802.3ad mode only:
* Getting invalid Speed/Duplex values here will put slave
- * in weird state. So mark it as link-down for the time
+ * in weird state. So mark it as link-fail for the time
* being and let link-monitoring (miimon) set it right when
* correct speeds/duplex are available.
*/
if (bond_update_speed_duplex(slave) &&
BOND_MODE(bond) == BOND_MODE_8023AD)
- slave->link = BOND_LINK_DOWN;
+ slave->link = BOND_LINK_FAIL;
if (BOND_MODE(bond) == BOND_MODE_8023AD)
bond_3ad_adapter_speed_duplex_changed(slave);
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 54e0ca6..86b6464 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -1117,11 +1117,6 @@ static int ksz_switch_init(struct ksz_device *dev)
{
int i;
- mutex_init(&dev->reg_mutex);
- mutex_init(&dev->stats_mutex);
- mutex_init(&dev->alu_mutex);
- mutex_init(&dev->vlan_mutex);
-
dev->ds->ops = &ksz_switch_ops;
for (i = 0; i < ARRAY_SIZE(ksz_switch_chips); i++) {
@@ -1206,6 +1201,11 @@ int ksz_switch_register(struct ksz_device *dev)
if (dev->pdata)
dev->chip_id = dev->pdata->chip_id;
+ mutex_init(&dev->reg_mutex);
+ mutex_init(&dev->stats_mutex);
+ mutex_init(&dev->alu_mutex);
+ mutex_init(&dev->vlan_mutex);
+
if (ksz_switch_detect(dev))
return -EINVAL;
diff --git a/drivers/net/dsa/mv88e6xxx/global1.c b/drivers/net/dsa/mv88e6xxx/global1.c
index d721ccf..38e399e 100644
--- a/drivers/net/dsa/mv88e6xxx/global1.c
+++ b/drivers/net/dsa/mv88e6xxx/global1.c
@@ -567,6 +567,8 @@ int mv88e6xxx_g1_stats_clear(struct mv88e6xxx_chip *chip)
if (err)
return err;
+ /* Keep the histogram mode bits */
+ val &= MV88E6XXX_G1_STATS_OP_HIST_RX_TX;
val |= MV88E6XXX_G1_STATS_OP_BUSY | MV88E6XXX_G1_STATS_OP_FLUSH_ALL;
err = mv88e6xxx_g1_write(chip, MV88E6XXX_G1_STATS_OP, val);
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c b/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c
index 6a633c7..99ef1da 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c
@@ -407,13 +407,13 @@ static void aq_ethtool_get_pauseparam(struct net_device *ndev,
struct ethtool_pauseparam *pause)
{
struct aq_nic_s *aq_nic = netdev_priv(ndev);
+ u32 fc = aq_nic->aq_nic_cfg.flow_control;
pause->autoneg = 0;
- if (aq_nic->aq_hw->aq_nic_cfg->flow_control & AQ_NIC_FC_RX)
- pause->rx_pause = 1;
- if (aq_nic->aq_hw->aq_nic_cfg->flow_control & AQ_NIC_FC_TX)
- pause->tx_pause = 1;
+ pause->rx_pause = !!(fc & AQ_NIC_FC_RX);
+ pause->tx_pause = !!(fc & AQ_NIC_FC_TX);
+
}
static int aq_ethtool_set_pauseparam(struct net_device *ndev,
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h
index e868924..a1e70da 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h
@@ -204,6 +204,10 @@ struct aq_hw_ops {
int (*hw_get_fw_version)(struct aq_hw_s *self, u32 *fw_version);
+ int (*hw_set_offload)(struct aq_hw_s *self,
+ struct aq_nic_cfg_s *aq_nic_cfg);
+
+ int (*hw_set_fc)(struct aq_hw_s *self, u32 fc, u32 tc);
};
struct aq_fw_ops {
@@ -226,6 +230,8 @@ struct aq_fw_ops {
int (*update_stats)(struct aq_hw_s *self);
+ u32 (*get_flow_control)(struct aq_hw_s *self, u32 *fcmode);
+
int (*set_flow_control)(struct aq_hw_s *self);
int (*set_power)(struct aq_hw_s *self, unsigned int power_state,
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_main.c b/drivers/net/ethernet/aquantia/atlantic/aq_main.c
index e3ae29e..7c07eef 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_main.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_main.c
@@ -99,8 +99,11 @@ static int aq_ndev_set_features(struct net_device *ndev,
struct aq_nic_s *aq_nic = netdev_priv(ndev);
struct aq_nic_cfg_s *aq_cfg = aq_nic_get_cfg(aq_nic);
bool is_lro = false;
+ int err = 0;
- if (aq_cfg->hw_features & NETIF_F_LRO) {
+ aq_cfg->features = features;
+
+ if (aq_cfg->aq_hw_caps->hw_features & NETIF_F_LRO) {
is_lro = features & NETIF_F_LRO;
if (aq_cfg->is_lro != is_lro) {
@@ -112,8 +115,11 @@ static int aq_ndev_set_features(struct net_device *ndev,
}
}
}
+ if ((aq_nic->ndev->features ^ features) & NETIF_F_RXCSUM)
+ err = aq_nic->aq_hw_ops->hw_set_offload(aq_nic->aq_hw,
+ aq_cfg);
- return 0;
+ return err;
}
static int aq_ndev_set_mac_address(struct net_device *ndev, void *addr)
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
index 5fed244..7abdc095 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
@@ -118,12 +118,13 @@ void aq_nic_cfg_start(struct aq_nic_s *self)
}
cfg->link_speed_msk &= cfg->aq_hw_caps->link_speed_msk;
- cfg->hw_features = cfg->aq_hw_caps->hw_features;
+ cfg->features = cfg->aq_hw_caps->hw_features;
}
static int aq_nic_update_link_status(struct aq_nic_s *self)
{
int err = self->aq_fw_ops->update_link_status(self->aq_hw);
+ u32 fc = 0;
if (err)
return err;
@@ -133,6 +134,15 @@ static int aq_nic_update_link_status(struct aq_nic_s *self)
AQ_CFG_DRV_NAME, self->link_status.mbps,
self->aq_hw->aq_link_status.mbps);
aq_nic_update_interrupt_moderation_settings(self);
+
+ /* Driver has to update flow control settings on RX block
+ * on any link event.
+ * We should query FW whether it negotiated FC.
+ */
+ if (self->aq_fw_ops->get_flow_control)
+ self->aq_fw_ops->get_flow_control(self->aq_hw, &fc);
+ if (self->aq_hw_ops->hw_set_fc)
+ self->aq_hw_ops->hw_set_fc(self->aq_hw, fc, 0);
}
self->link_status = self->aq_hw->aq_link_status;
@@ -590,7 +600,7 @@ int aq_nic_set_multicast_list(struct aq_nic_s *self, struct net_device *ndev)
}
}
- if (i > 0 && i < AQ_HW_MULTICAST_ADDRESS_MAX) {
+ if (i > 0 && i <= AQ_HW_MULTICAST_ADDRESS_MAX) {
packet_filter |= IFF_MULTICAST;
self->mc_list.count = i;
self->aq_hw_ops->hw_multicast_list_set(self->aq_hw,
@@ -772,7 +782,9 @@ void aq_nic_get_link_ksettings(struct aq_nic_s *self,
ethtool_link_ksettings_add_link_mode(cmd, advertising,
Pause);
- if (self->aq_nic_cfg.flow_control & AQ_NIC_FC_TX)
+ /* Asym is when either RX or TX, but not both */
+ if (!!(self->aq_nic_cfg.flow_control & AQ_NIC_FC_TX) ^
+ !!(self->aq_nic_cfg.flow_control & AQ_NIC_FC_RX))
ethtool_link_ksettings_add_link_mode(cmd, advertising,
Asym_Pause);
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h
index c1582f4..44ec47a 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h
@@ -23,7 +23,7 @@ struct aq_vec_s;
struct aq_nic_cfg_s {
const struct aq_hw_caps_s *aq_hw_caps;
- u64 hw_features;
+ u64 features;
u32 rxds; /* rx ring size, descriptors # */
u32 txds; /* tx ring size, descriptors # */
u32 vecs; /* vecs==allocated irqs */
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
index 3db9144..74550cc 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
@@ -172,6 +172,27 @@ bool aq_ring_tx_clean(struct aq_ring_s *self)
return !!budget;
}
+static void aq_rx_checksum(struct aq_ring_s *self,
+ struct aq_ring_buff_s *buff,
+ struct sk_buff *skb)
+{
+ if (!(self->aq_nic->ndev->features & NETIF_F_RXCSUM))
+ return;
+
+ if (unlikely(buff->is_cso_err)) {
+ ++self->stats.rx.errors;
+ skb->ip_summed = CHECKSUM_NONE;
+ return;
+ }
+ if (buff->is_ip_cso) {
+ __skb_incr_checksum_unnecessary(skb);
+ if (buff->is_udp_cso || buff->is_tcp_cso)
+ __skb_incr_checksum_unnecessary(skb);
+ } else {
+ skb->ip_summed = CHECKSUM_NONE;
+ }
+}
+
#define AQ_SKB_ALIGN SKB_DATA_ALIGN(sizeof(struct skb_shared_info))
int aq_ring_rx_clean(struct aq_ring_s *self,
struct napi_struct *napi,
@@ -267,18 +288,8 @@ int aq_ring_rx_clean(struct aq_ring_s *self,
}
skb->protocol = eth_type_trans(skb, ndev);
- if (unlikely(buff->is_cso_err)) {
- ++self->stats.rx.errors;
- skb->ip_summed = CHECKSUM_NONE;
- } else {
- if (buff->is_ip_cso) {
- __skb_incr_checksum_unnecessary(skb);
- if (buff->is_udp_cso || buff->is_tcp_cso)
- __skb_incr_checksum_unnecessary(skb);
- } else {
- skb->ip_summed = CHECKSUM_NONE;
- }
- }
+
+ aq_rx_checksum(self, buff, skb);
skb_set_hash(skb, buff->rss_hash,
buff->is_hash_l4 ? PKT_HASH_TYPE_L4 :
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
index 76d25d5..f02592f 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
@@ -100,12 +100,17 @@ static int hw_atl_b0_hw_reset(struct aq_hw_s *self)
return err;
}
+static int hw_atl_b0_set_fc(struct aq_hw_s *self, u32 fc, u32 tc)
+{
+ hw_atl_rpb_rx_xoff_en_per_tc_set(self, !!(fc & AQ_NIC_FC_RX), tc);
+ return 0;
+}
+
static int hw_atl_b0_hw_qos_set(struct aq_hw_s *self)
{
u32 tc = 0U;
u32 buff_size = 0U;
unsigned int i_priority = 0U;
- bool is_rx_flow_control = false;
/* TPS Descriptor rate init */
hw_atl_tps_tx_pkt_shed_desc_rate_curr_time_res_set(self, 0x0U);
@@ -138,7 +143,6 @@ static int hw_atl_b0_hw_qos_set(struct aq_hw_s *self)
/* QoS Rx buf size per TC */
tc = 0;
- is_rx_flow_control = (AQ_NIC_FC_RX & self->aq_nic_cfg->flow_control);
buff_size = HW_ATL_B0_RXBUF_MAX;
hw_atl_rpb_rx_pkt_buff_size_per_tc_set(self, buff_size, tc);
@@ -150,7 +154,8 @@ static int hw_atl_b0_hw_qos_set(struct aq_hw_s *self)
(buff_size *
(1024U / 32U) * 50U) /
100U, tc);
- hw_atl_rpb_rx_xoff_en_per_tc_set(self, is_rx_flow_control ? 1U : 0U, tc);
+
+ hw_atl_b0_set_fc(self, self->aq_nic_cfg->flow_control, tc);
/* QoS 802.1p priority -> TC mapping */
for (i_priority = 8U; i_priority--;)
@@ -229,8 +234,10 @@ static int hw_atl_b0_hw_offload_set(struct aq_hw_s *self,
hw_atl_tpo_tcp_udp_crc_offload_en_set(self, 1);
/* RX checksums offloads*/
- hw_atl_rpo_ipv4header_crc_offload_en_set(self, 1);
- hw_atl_rpo_tcp_udp_crc_offload_en_set(self, 1);
+ hw_atl_rpo_ipv4header_crc_offload_en_set(self, !!(aq_nic_cfg->features &
+ NETIF_F_RXCSUM));
+ hw_atl_rpo_tcp_udp_crc_offload_en_set(self, !!(aq_nic_cfg->features &
+ NETIF_F_RXCSUM));
/* LSO offloads*/
hw_atl_tdm_large_send_offload_en_set(self, 0xFFFFFFFFU);
@@ -655,9 +662,9 @@ static int hw_atl_b0_hw_ring_rx_receive(struct aq_hw_s *self,
struct hw_atl_rxd_wb_s *rxd_wb = (struct hw_atl_rxd_wb_s *)
&ring->dx_ring[ring->hw_head * HW_ATL_B0_RXD_SIZE];
- unsigned int is_err = 1U;
unsigned int is_rx_check_sum_enabled = 0U;
unsigned int pkt_type = 0U;
+ u8 rx_stat = 0U;
if (!(rxd_wb->status & 0x1U)) { /* RxD is not done */
break;
@@ -665,35 +672,35 @@ static int hw_atl_b0_hw_ring_rx_receive(struct aq_hw_s *self,
buff = &ring->buff_ring[ring->hw_head];
- is_err = (0x0000003CU & rxd_wb->status);
+ rx_stat = (0x0000003CU & rxd_wb->status) >> 2;
is_rx_check_sum_enabled = (rxd_wb->type) & (0x3U << 19);
- is_err &= ~0x20U; /* exclude validity bit */
pkt_type = 0xFFU & (rxd_wb->type >> 4);
- if (is_rx_check_sum_enabled) {
- if (0x0U == (pkt_type & 0x3U))
- buff->is_ip_cso = (is_err & 0x08U) ? 0U : 1U;
+ if (is_rx_check_sum_enabled & BIT(0) &&
+ (0x0U == (pkt_type & 0x3U)))
+ buff->is_ip_cso = (rx_stat & BIT(1)) ? 0U : 1U;
+ if (is_rx_check_sum_enabled & BIT(1)) {
if (0x4U == (pkt_type & 0x1CU))
- buff->is_udp_cso = buff->is_cso_err ? 0U : 1U;
+ buff->is_udp_cso = (rx_stat & BIT(2)) ? 0U :
+ !!(rx_stat & BIT(3));
else if (0x0U == (pkt_type & 0x1CU))
- buff->is_tcp_cso = buff->is_cso_err ? 0U : 1U;
-
- /* Checksum offload workaround for small packets */
- if (rxd_wb->pkt_len <= 60) {
- buff->is_ip_cso = 0U;
- buff->is_cso_err = 0U;
- }
+ buff->is_tcp_cso = (rx_stat & BIT(2)) ? 0U :
+ !!(rx_stat & BIT(3));
}
-
- is_err &= ~0x18U;
+ buff->is_cso_err = !!(rx_stat & 0x6);
+ /* Checksum offload workaround for small packets */
+ if (unlikely(rxd_wb->pkt_len <= 60)) {
+ buff->is_ip_cso = 0U;
+ buff->is_cso_err = 0U;
+ }
dma_unmap_page(ndev, buff->pa, buff->len, DMA_FROM_DEVICE);
- if (is_err || rxd_wb->type & 0x1000U) {
- /* status error or DMA error */
+ if ((rx_stat & BIT(0)) || rxd_wb->type & 0x1000U) {
+ /* MAC error or DMA error */
buff->is_error = 1U;
} else {
if (self->aq_nic_cfg->is_rss) {
@@ -915,6 +922,12 @@ static int hw_atl_b0_hw_interrupt_moderation_set(struct aq_hw_s *self)
static int hw_atl_b0_hw_stop(struct aq_hw_s *self)
{
hw_atl_b0_hw_irq_disable(self, HW_ATL_B0_INT_MASK);
+
+ /* Invalidate Descriptor Cache to prevent writing to the cached
+ * descriptors and to the data pointer of those descriptors
+ */
+ hw_atl_rdm_rx_dma_desc_cache_init_set(self, 1);
+
return aq_hw_err_from_flags(self);
}
@@ -963,4 +976,6 @@ const struct aq_hw_ops hw_atl_ops_b0 = {
.hw_get_regs = hw_atl_utils_hw_get_regs,
.hw_get_hw_stats = hw_atl_utils_get_hw_stats,
.hw_get_fw_version = hw_atl_utils_get_fw_version,
+ .hw_set_offload = hw_atl_b0_hw_offload_set,
+ .hw_set_fc = hw_atl_b0_set_fc,
};
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c
index be0a3a9..5502ec5f 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c
@@ -619,6 +619,14 @@ void hw_atl_rpb_rx_flow_ctl_mode_set(struct aq_hw_s *aq_hw, u32 rx_flow_ctl_mode
HW_ATL_RPB_RX_FC_MODE_SHIFT, rx_flow_ctl_mode);
}
+void hw_atl_rdm_rx_dma_desc_cache_init_set(struct aq_hw_s *aq_hw, u32 init)
+{
+ aq_hw_write_reg_bit(aq_hw, HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_ADR,
+ HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_MSK,
+ HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_SHIFT,
+ init);
+}
+
void hw_atl_rpb_rx_pkt_buff_size_per_tc_set(struct aq_hw_s *aq_hw,
u32 rx_pkt_buff_size_per_tc, u32 buffer)
{
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h
index 7056c73..41f2399 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h
@@ -325,6 +325,9 @@ void hw_atl_rpb_rx_pkt_buff_size_per_tc_set(struct aq_hw_s *aq_hw,
u32 rx_pkt_buff_size_per_tc,
u32 buffer);
+/* set rdm rx dma descriptor cache init */
+void hw_atl_rdm_rx_dma_desc_cache_init_set(struct aq_hw_s *aq_hw, u32 init);
+
/* set rx xoff enable (per tc) */
void hw_atl_rpb_rx_xoff_en_per_tc_set(struct aq_hw_s *aq_hw, u32 rx_xoff_en_per_tc,
u32 buffer);
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h
index 716674a..a715fa3 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h
@@ -293,6 +293,24 @@
/* default value of bitfield desc{d}_reset */
#define HW_ATL_RDM_DESCDRESET_DEFAULT 0x0
+/* rdm_desc_init_i bitfield definitions
+ * preprocessor definitions for the bitfield rdm_desc_init_i.
+ * port="pif_rdm_desc_init_i"
+ */
+
+/* register address for bitfield rdm_desc_init_i */
+#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_ADR 0x00005a00
+/* bitmask for bitfield rdm_desc_init_i */
+#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_MSK 0xffffffff
+/* inverted bitmask for bitfield rdm_desc_init_i */
+#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_MSKN 0x00000000
+/* lower bit position of bitfield rdm_desc_init_i */
+#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_SHIFT 0
+/* width of bitfield rdm_desc_init_i */
+#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_WIDTH 32
+/* default value of bitfield rdm_desc_init_i */
+#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_DEFAULT 0x0
+
/* rx int_desc_wrb_en bitfield definitions
* preprocessor definitions for the bitfield "int_desc_wrb_en".
* port="pif_rdm_int_desc_wrb_en_i"
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c
index 096ca57..7de3220 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c
@@ -30,6 +30,8 @@
#define HW_ATL_FW2X_MPI_STATE_ADDR 0x370
#define HW_ATL_FW2X_MPI_STATE2_ADDR 0x374
+#define HW_ATL_FW2X_CAP_PAUSE BIT(CAPS_HI_PAUSE)
+#define HW_ATL_FW2X_CAP_ASYM_PAUSE BIT(CAPS_HI_ASYMMETRIC_PAUSE)
#define HW_ATL_FW2X_CAP_SLEEP_PROXY BIT(CAPS_HI_SLEEP_PROXY)
#define HW_ATL_FW2X_CAP_WOL BIT(CAPS_HI_WOL)
@@ -451,6 +453,24 @@ static int aq_fw2x_set_flow_control(struct aq_hw_s *self)
return 0;
}
+static u32 aq_fw2x_get_flow_control(struct aq_hw_s *self, u32 *fcmode)
+{
+ u32 mpi_state = aq_hw_read_reg(self, HW_ATL_FW2X_MPI_STATE2_ADDR);
+
+ if (mpi_state & HW_ATL_FW2X_CAP_PAUSE)
+ if (mpi_state & HW_ATL_FW2X_CAP_ASYM_PAUSE)
+ *fcmode = AQ_NIC_FC_RX;
+ else
+ *fcmode = AQ_NIC_FC_RX | AQ_NIC_FC_TX;
+ else
+ if (mpi_state & HW_ATL_FW2X_CAP_ASYM_PAUSE)
+ *fcmode = AQ_NIC_FC_TX;
+ else
+ *fcmode = 0;
+
+ return 0;
+}
+
const struct aq_fw_ops aq_fw_2x_ops = {
.init = aq_fw2x_init,
.deinit = aq_fw2x_deinit,
@@ -465,4 +485,5 @@ const struct aq_fw_ops aq_fw_2x_ops = {
.set_eee_rate = aq_fw2x_set_eee_rate,
.get_eee_rate = aq_fw2x_get_eee_rate,
.set_flow_control = aq_fw2x_set_flow_control,
+ .get_flow_control = aq_fw2x_get_flow_control
};
diff --git a/drivers/net/ethernet/atheros/alx/alx.h b/drivers/net/ethernet/atheros/alx/alx.h
index 78c5de4..9d0e74f 100644
--- a/drivers/net/ethernet/atheros/alx/alx.h
+++ b/drivers/net/ethernet/atheros/alx/alx.h
@@ -140,6 +140,5 @@ struct alx_priv {
};
extern const struct ethtool_ops alx_ethtool_ops;
-extern const char alx_drv_name[];
#endif
diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c
index 7968c64..c131cfc1 100644
--- a/drivers/net/ethernet/atheros/alx/main.c
+++ b/drivers/net/ethernet/atheros/alx/main.c
@@ -49,7 +49,7 @@
#include "hw.h"
#include "reg.h"
-const char alx_drv_name[] = "alx";
+static const char alx_drv_name[] = "alx";
static void alx_free_txbuf(struct alx_tx_queue *txq, int entry)
{
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index 4122553..0e2d99c 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -1902,9 +1902,6 @@ static void bcm_sysport_netif_start(struct net_device *dev)
intrl2_1_mask_clear(priv, 0xffffffff);
else
intrl2_0_mask_clear(priv, INTRL2_0_TDMA_MBDONE_MASK);
-
- /* Last call before we start the real business */
- netif_tx_start_all_queues(dev);
}
static void rbuf_init(struct bcm_sysport_priv *priv)
@@ -2048,6 +2045,8 @@ static int bcm_sysport_open(struct net_device *dev)
bcm_sysport_netif_start(dev);
+ netif_tx_start_all_queues(dev);
+
return 0;
out_clear_rx_int:
@@ -2071,7 +2070,7 @@ static void bcm_sysport_netif_stop(struct net_device *dev)
struct bcm_sysport_priv *priv = netdev_priv(dev);
/* stop all software from updating hardware */
- netif_tx_stop_all_queues(dev);
+ netif_tx_disable(dev);
napi_disable(&priv->napi);
cancel_work_sync(&priv->dim.dim.work);
phy_stop(dev->phydev);
@@ -2658,12 +2657,12 @@ static int __maybe_unused bcm_sysport_suspend(struct device *d)
if (!netif_running(dev))
return 0;
+ netif_device_detach(dev);
+
bcm_sysport_netif_stop(dev);
phy_suspend(dev->phydev);
- netif_device_detach(dev);
-
/* Disable UniMAC RX */
umac_enable_set(priv, CMD_RX_EN, 0);
@@ -2746,8 +2745,6 @@ static int __maybe_unused bcm_sysport_resume(struct device *d)
goto out_free_rx_ring;
}
- netif_device_attach(dev);
-
/* RX pipe enable */
topctrl_writel(priv, 0, RX_FLUSH_CNTL);
@@ -2788,6 +2785,8 @@ static int __maybe_unused bcm_sysport_resume(struct device *d)
bcm_sysport_netif_start(dev);
+ netif_device_attach(dev);
+
return 0;
out_free_rx_ring:
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 20c1681..2d6f090 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2855,7 +2855,6 @@ static void bcmgenet_netif_start(struct net_device *dev)
umac_enable_set(priv, CMD_TX_EN | CMD_RX_EN, true);
- netif_tx_start_all_queues(dev);
bcmgenet_enable_tx_napi(priv);
/* Monitor link interrupts now */
@@ -2937,6 +2936,8 @@ static int bcmgenet_open(struct net_device *dev)
bcmgenet_netif_start(dev);
+ netif_tx_start_all_queues(dev);
+
return 0;
err_irq1:
@@ -2958,7 +2959,7 @@ static void bcmgenet_netif_stop(struct net_device *dev)
struct bcmgenet_priv *priv = netdev_priv(dev);
bcmgenet_disable_tx_napi(priv);
- netif_tx_stop_all_queues(dev);
+ netif_tx_disable(dev);
/* Disable MAC receive */
umac_enable_set(priv, CMD_RX_EN, false);
@@ -3620,13 +3621,13 @@ static int bcmgenet_suspend(struct device *d)
if (!netif_running(dev))
return 0;
+ netif_device_detach(dev);
+
bcmgenet_netif_stop(dev);
if (!device_may_wakeup(d))
phy_suspend(dev->phydev);
- netif_device_detach(dev);
-
/* Prepare the device for Wake-on-LAN and switch to the slow clock */
if (device_may_wakeup(d) && priv->wolopts) {
ret = bcmgenet_power_down(priv, GENET_POWER_WOL_MAGIC);
@@ -3700,8 +3701,6 @@ static int bcmgenet_resume(struct device *d)
/* Always enable ring 16 - descriptor ring */
bcmgenet_enable_dma(priv, dma_ctrl);
- netif_device_attach(dev);
-
if (!device_may_wakeup(d))
phy_resume(dev->phydev);
@@ -3710,6 +3709,8 @@ static int bcmgenet_resume(struct device *d)
bcmgenet_netif_start(dev);
+ netif_device_attach(dev);
+
return 0;
out_clk_disable:
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 3f96aa3..20fcf0d 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -3760,7 +3760,8 @@ static int hns3_reset_notify_init_enet(struct hnae3_handle *handle)
/* Hardware table is only clear when pf resets */
if (!(handle->flags & HNAE3_SUPPORT_VF)) {
ret = hns3_restore_vlan(netdev);
- return ret;
+ if (ret)
+ return ret;
}
ret = hns3_restore_fd_rules(netdev);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
index aa5cb98..494e562 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
@@ -1168,14 +1168,14 @@ static int hclge_pfc_setup_hw(struct hclge_dev *hdev)
*/
static int hclge_bp_setup_hw(struct hclge_dev *hdev, u8 tc)
{
- struct hclge_vport *vport = hdev->vport;
- u32 i, k, qs_bitmap;
- int ret;
+ int i;
for (i = 0; i < HCLGE_BP_GRP_NUM; i++) {
- qs_bitmap = 0;
+ u32 qs_bitmap = 0;
+ int k, ret;
for (k = 0; k < hdev->num_alloc_vport; k++) {
+ struct hclge_vport *vport = &hdev->vport[k];
u16 qs_id = vport->qs_offset + tc;
u8 grp, sub_grp;
@@ -1185,8 +1185,6 @@ static int hclge_bp_setup_hw(struct hclge_dev *hdev, u8 tc)
HCLGE_BP_SUB_GRP_ID_S);
if (i == grp)
qs_bitmap |= (1 << sub_grp);
-
- vport++;
}
ret = hclge_tm_qs_bp_cfg(hdev, tc, i, qs_bitmap);
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 7893bef..c9d5d0a 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -1545,7 +1545,7 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
tx_crq.v1.sge_len = cpu_to_be32(skb->len);
tx_crq.v1.ioba = cpu_to_be64(data_dma_addr);
- if (adapter->vlan_header_insertion) {
+ if (adapter->vlan_header_insertion && skb_vlan_tag_present(skb)) {
tx_crq.v1.flags2 |= IBMVNIC_TX_VLAN_INSERT;
tx_crq.v1.vlan_id = cpu_to_be16(skb->vlan_tci);
}
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index bc71a21..21c2688 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -12249,6 +12249,8 @@ static int i40e_config_netdev(struct i40e_vsi *vsi)
NETIF_F_GSO_GRE |
NETIF_F_GSO_GRE_CSUM |
NETIF_F_GSO_PARTIAL |
+ NETIF_F_GSO_IPXIP4 |
+ NETIF_F_GSO_IPXIP6 |
NETIF_F_GSO_UDP_TUNNEL |
NETIF_F_GSO_UDP_TUNNEL_CSUM |
NETIF_F_SCTP_CRC |
@@ -12266,13 +12268,13 @@ static int i40e_config_netdev(struct i40e_vsi *vsi)
/* record features VLANs can make use of */
netdev->vlan_features |= hw_enc_features | NETIF_F_TSO_MANGLEID;
- if (!(pf->flags & I40E_FLAG_MFP_ENABLED))
- netdev->hw_features |= NETIF_F_NTUPLE | NETIF_F_HW_TC;
-
hw_features = hw_enc_features |
NETIF_F_HW_VLAN_CTAG_TX |
NETIF_F_HW_VLAN_CTAG_RX;
+ if (!(pf->flags & I40E_FLAG_MFP_ENABLED))
+ hw_features |= NETIF_F_NTUPLE | NETIF_F_HW_TC;
+
netdev->hw_features |= hw_features;
netdev->features |= hw_features | NETIF_F_HW_VLAN_CTAG_FILTER;
diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
index 4c4b571..b854837 100644
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@ -76,6 +76,8 @@ extern const char ice_drv_ver[];
#define ICE_MIN_INTR_PER_VF (ICE_MIN_QS_PER_VF + 1)
#define ICE_DFLT_INTR_PER_VF (ICE_DFLT_QS_PER_VF + 1)
+#define ICE_MAX_RESET_WAIT 20
+
#define ICE_VSIQF_HKEY_ARRAY_SIZE ((VSIQF_HKEY_MAX_INDEX + 1) * 4)
#define ICE_DFLT_NETIF_M (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)
@@ -189,7 +191,6 @@ struct ice_vsi {
u64 tx_linearize;
DECLARE_BITMAP(state, __ICE_STATE_NBITS);
DECLARE_BITMAP(flags, ICE_VSI_FLAG_NBITS);
- unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
unsigned int current_netdev_flags;
u32 tx_restart;
u32 tx_busy;
@@ -369,5 +370,6 @@ int ice_set_rss(struct ice_vsi *vsi, u8 *seed, u8 *lut, u16 lut_size);
int ice_get_rss(struct ice_vsi *vsi, u8 *seed, u8 *lut, u16 lut_size);
void ice_fill_rss_lut(u8 *lut, u16 rss_table_size, u16 rss_size);
void ice_print_link_msg(struct ice_vsi *vsi, bool isup);
+void ice_napi_del(struct ice_vsi *vsi);
#endif /* _ICE_H_ */
diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index 8cd6a240..554fd70 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -811,6 +811,9 @@ void ice_deinit_hw(struct ice_hw *hw)
/* Attempt to disable FW logging before shutting down control queues */
ice_cfg_fw_log(hw, false);
ice_shutdown_all_ctrlq(hw);
+
+ /* Clear VSI contexts if not already cleared */
+ ice_clear_all_vsi_ctx(hw);
}
/**
diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index 9692358..648acdb 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -1517,10 +1517,15 @@ ice_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause)
}
if (!test_bit(__ICE_DOWN, pf->state)) {
- /* Give it a little more time to try to come back */
+ /* Give it a little more time to try to come back. If still
+ * down, restart autoneg link or reinitialize the interface.
+ */
msleep(75);
if (!test_bit(__ICE_DOWN, pf->state))
return ice_nway_reset(netdev);
+
+ ice_down(vsi);
+ ice_up(vsi);
}
return err;
diff --git a/drivers/net/ethernet/intel/ice/ice_hw_autogen.h b/drivers/net/ethernet/intel/ice/ice_hw_autogen.h
index 5fdea6e..596b9fb 100644
--- a/drivers/net/ethernet/intel/ice/ice_hw_autogen.h
+++ b/drivers/net/ethernet/intel/ice/ice_hw_autogen.h
@@ -242,6 +242,8 @@
#define GLNVM_ULD 0x000B6008
#define GLNVM_ULD_CORER_DONE_M BIT(3)
#define GLNVM_ULD_GLOBR_DONE_M BIT(4)
+#define GLPCI_CNF2 0x000BE004
+#define GLPCI_CNF2_CACHELINE_SIZE_M BIT(1)
#define PF_FUNC_RID 0x0009E880
#define PF_FUNC_RID_FUNC_NUM_S 0
#define PF_FUNC_RID_FUNC_NUM_M ICE_M(0x7, 0)
diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index 5bacad0..1041fa2 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -1997,7 +1997,7 @@ int ice_cfg_vlan_pruning(struct ice_vsi *vsi, bool ena)
status = ice_update_vsi(&vsi->back->hw, vsi->idx, ctxt, NULL);
if (status) {
netdev_err(vsi->netdev, "%sabling VLAN pruning on VSI handle: %d, VSI HW ID: %d failed, err = %d, aq_err = %d\n",
- ena ? "Ena" : "Dis", vsi->idx, vsi->vsi_num, status,
+ ena ? "En" : "Dis", vsi->idx, vsi->vsi_num, status,
vsi->back->hw.adminq.sq_last_status);
goto err_out;
}
@@ -2458,6 +2458,7 @@ int ice_vsi_release(struct ice_vsi *vsi)
* on this wq
*/
if (vsi->netdev && !ice_is_reset_in_progress(pf->state)) {
+ ice_napi_del(vsi);
unregister_netdev(vsi->netdev);
free_netdev(vsi->netdev);
vsi->netdev = NULL;
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 0599345..333312a1 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -1465,7 +1465,7 @@ static int ice_req_irq_msix_misc(struct ice_pf *pf)
* ice_napi_del - Remove NAPI handler for the VSI
* @vsi: VSI for which NAPI handler is to be removed
*/
-static void ice_napi_del(struct ice_vsi *vsi)
+void ice_napi_del(struct ice_vsi *vsi)
{
int v_idx;
@@ -1622,7 +1622,6 @@ static int ice_vlan_rx_add_vid(struct net_device *netdev,
{
struct ice_netdev_priv *np = netdev_priv(netdev);
struct ice_vsi *vsi = np->vsi;
- int ret;
if (vid >= VLAN_N_VID) {
netdev_err(netdev, "VLAN id requested %d is out of range %d\n",
@@ -1635,7 +1634,8 @@ static int ice_vlan_rx_add_vid(struct net_device *netdev,
/* Enable VLAN pruning when VLAN 0 is added */
if (unlikely(!vid)) {
- ret = ice_cfg_vlan_pruning(vsi, true);
+ int ret = ice_cfg_vlan_pruning(vsi, true);
+
if (ret)
return ret;
}
@@ -1644,12 +1644,7 @@ static int ice_vlan_rx_add_vid(struct net_device *netdev,
* needed to continue allowing all untagged packets since VLAN prune
* list is applied to all packets by the switch
*/
- ret = ice_vsi_add_vlan(vsi, vid);
-
- if (!ret)
- set_bit(vid, vsi->active_vlans);
-
- return ret;
+ return ice_vsi_add_vlan(vsi, vid);
}
/**
@@ -1677,8 +1672,6 @@ static int ice_vlan_rx_kill_vid(struct net_device *netdev,
if (status)
return status;
- clear_bit(vid, vsi->active_vlans);
-
/* Disable VLAN pruning when VLAN 0 is removed */
if (unlikely(!vid))
status = ice_cfg_vlan_pruning(vsi, false);
@@ -2002,6 +1995,22 @@ static int ice_init_interrupt_scheme(struct ice_pf *pf)
}
/**
+ * ice_verify_cacheline_size - verify driver's assumption of 64 Byte cache lines
+ * @pf: pointer to the PF structure
+ *
+ * There is no error returned here because the driver should be able to handle
+ * 128 Byte cache lines, so we only print a warning in case issues are seen,
+ * specifically with Tx.
+ */
+static void ice_verify_cacheline_size(struct ice_pf *pf)
+{
+ if (rd32(&pf->hw, GLPCI_CNF2) & GLPCI_CNF2_CACHELINE_SIZE_M)
+ dev_warn(&pf->pdev->dev,
+ "%d Byte cache line assumption is invalid, driver may have Tx timeouts!\n",
+ ICE_CACHE_LINE_BYTES);
+}
+
+/**
* ice_probe - Device initialization routine
* @pdev: PCI device information struct
* @ent: entry in ice_pci_tbl
@@ -2151,6 +2160,8 @@ static int ice_probe(struct pci_dev *pdev,
/* since everything is good, start the service timer */
mod_timer(&pf->serv_tmr, round_jiffies(jiffies + pf->serv_tmr_period));
+ ice_verify_cacheline_size(pf);
+
return 0;
err_alloc_sw_unroll:
@@ -2182,6 +2193,12 @@ static void ice_remove(struct pci_dev *pdev)
if (!pf)
return;
+ for (i = 0; i < ICE_MAX_RESET_WAIT; i++) {
+ if (!ice_is_reset_in_progress(pf->state))
+ break;
+ msleep(100);
+ }
+
set_bit(__ICE_DOWN, pf->state);
ice_service_task_stop(pf);
@@ -2510,31 +2527,6 @@ static int ice_vsi_vlan_setup(struct ice_vsi *vsi)
}
/**
- * ice_restore_vlan - Reinstate VLANs when vsi/netdev comes back up
- * @vsi: the VSI being brought back up
- */
-static int ice_restore_vlan(struct ice_vsi *vsi)
-{
- int err;
- u16 vid;
-
- if (!vsi->netdev)
- return -EINVAL;
-
- err = ice_vsi_vlan_setup(vsi);
- if (err)
- return err;
-
- for_each_set_bit(vid, vsi->active_vlans, VLAN_N_VID) {
- err = ice_vlan_rx_add_vid(vsi->netdev, htons(ETH_P_8021Q), vid);
- if (err)
- break;
- }
-
- return err;
-}
-
-/**
* ice_vsi_cfg - Setup the VSI
* @vsi: the VSI being configured
*
@@ -2546,7 +2538,9 @@ static int ice_vsi_cfg(struct ice_vsi *vsi)
if (vsi->netdev) {
ice_set_rx_mode(vsi->netdev);
- err = ice_restore_vlan(vsi);
+
+ err = ice_vsi_vlan_setup(vsi);
+
if (err)
return err;
}
@@ -3296,7 +3290,7 @@ static void ice_rebuild(struct ice_pf *pf)
struct device *dev = &pf->pdev->dev;
struct ice_hw *hw = &pf->hw;
enum ice_status ret;
- int err;
+ int err, i;
if (test_bit(__ICE_DOWN, pf->state))
goto clear_recovery;
@@ -3370,6 +3364,22 @@ static void ice_rebuild(struct ice_pf *pf)
}
ice_reset_all_vfs(pf, true);
+
+ for (i = 0; i < pf->num_alloc_vsi; i++) {
+ bool link_up;
+
+ if (!pf->vsi[i] || pf->vsi[i]->type != ICE_VSI_PF)
+ continue;
+ ice_get_link_status(pf->vsi[i]->port_info, &link_up);
+ if (link_up) {
+ netif_carrier_on(pf->vsi[i]->netdev);
+ netif_tx_wake_all_queues(pf->vsi[i]->netdev);
+ } else {
+ netif_carrier_off(pf->vsi[i]->netdev);
+ netif_tx_stop_all_queues(pf->vsi[i]->netdev);
+ }
+ }
+
/* if we get here, reset flow is successful */
clear_bit(__ICE_RESET_FAILED, pf->state);
return;
diff --git a/drivers/net/ethernet/intel/ice/ice_switch.c b/drivers/net/ethernet/intel/ice/ice_switch.c
index 33403f3..40c9c65 100644
--- a/drivers/net/ethernet/intel/ice/ice_switch.c
+++ b/drivers/net/ethernet/intel/ice/ice_switch.c
@@ -348,6 +348,18 @@ static void ice_clear_vsi_ctx(struct ice_hw *hw, u16 vsi_handle)
}
/**
+ * ice_clear_all_vsi_ctx - clear all the VSI context entries
+ * @hw: pointer to the hw struct
+ */
+void ice_clear_all_vsi_ctx(struct ice_hw *hw)
+{
+ u16 i;
+
+ for (i = 0; i < ICE_MAX_VSI; i++)
+ ice_clear_vsi_ctx(hw, i);
+}
+
+/**
* ice_add_vsi - add VSI context to the hardware and VSI handle list
* @hw: pointer to the hw struct
* @vsi_handle: unique VSI handle provided by drivers
diff --git a/drivers/net/ethernet/intel/ice/ice_switch.h b/drivers/net/ethernet/intel/ice/ice_switch.h
index b88d96a..d5ef0bd 100644
--- a/drivers/net/ethernet/intel/ice/ice_switch.h
+++ b/drivers/net/ethernet/intel/ice/ice_switch.h
@@ -190,6 +190,8 @@ ice_update_vsi(struct ice_hw *hw, u16 vsi_handle, struct ice_vsi_ctx *vsi_ctx,
struct ice_sq_cd *cd);
bool ice_is_vsi_valid(struct ice_hw *hw, u16 vsi_handle);
struct ice_vsi_ctx *ice_get_vsi_ctx(struct ice_hw *hw, u16 vsi_handle);
+void ice_clear_all_vsi_ctx(struct ice_hw *hw);
+/* Switch config */
enum ice_status ice_get_initial_sw_cfg(struct ice_hw *hw);
/* Switch/bridge related commands */
diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c
index 5dae968..fe5bbab 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx.c
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.c
@@ -1520,7 +1520,7 @@ int ice_tso(struct ice_tx_buf *first, struct ice_tx_offload_params *off)
/* update gso_segs and bytecount */
first->gso_segs = skb_shinfo(skb)->gso_segs;
- first->bytecount = (first->gso_segs - 1) * off->header_len;
+ first->bytecount += (first->gso_segs - 1) * off->header_len;
cd_tso_len = skb->len - off->header_len;
cd_mss = skb_shinfo(skb)->gso_size;
@@ -1556,15 +1556,15 @@ int ice_tso(struct ice_tx_buf *first, struct ice_tx_offload_params *off)
* magnitude greater than our largest possible GSO size.
*
* This would then be implemented as:
- * return (((size >> 12) * 85) >> 8) + 1;
+ * return (((size >> 12) * 85) >> 8) + ICE_DESCS_FOR_SKB_DATA_PTR;
*
* Since multiplication and division are commutative, we can reorder
* operations into:
- * return ((size * 85) >> 20) + 1;
+ * return ((size * 85) >> 20) + ICE_DESCS_FOR_SKB_DATA_PTR;
*/
static unsigned int ice_txd_use_count(unsigned int size)
{
- return ((size * 85) >> 20) + 1;
+ return ((size * 85) >> 20) + ICE_DESCS_FOR_SKB_DATA_PTR;
}
/**
@@ -1706,7 +1706,8 @@ ice_xmit_frame_ring(struct sk_buff *skb, struct ice_ring *tx_ring)
* + 1 desc for context descriptor,
* otherwise try next time
*/
- if (ice_maybe_stop_tx(tx_ring, count + 4 + 1)) {
+ if (ice_maybe_stop_tx(tx_ring, count + ICE_DESCS_PER_CACHE_LINE +
+ ICE_DESCS_FOR_CTX_DESC)) {
tx_ring->tx_stats.tx_busy++;
return NETDEV_TX_BUSY;
}
diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.h b/drivers/net/ethernet/intel/ice/ice_txrx.h
index 1d0f58b..75d0eaf 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx.h
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.h
@@ -22,8 +22,21 @@
#define ICE_RX_BUF_WRITE 16 /* Must be power of 2 */
#define ICE_MAX_TXQ_PER_TXQG 128
-/* Tx Descriptors needed, worst case */
-#define DESC_NEEDED (MAX_SKB_FRAGS + 4)
+/* We are assuming that the cache line is always 64 Bytes here for ice.
+ * In order to make sure that is a correct assumption there is a check in probe
+ * to print a warning if the read from GLPCI_CNF2 tells us that the cache line
+ * size is 128 bytes. We do it this way because we do not want to read the
+ * GLPCI_CNF2 register or a variable containing the value on every pass through
+ * the Tx path.
+ */
+#define ICE_CACHE_LINE_BYTES 64
+#define ICE_DESCS_PER_CACHE_LINE (ICE_CACHE_LINE_BYTES / \
+ sizeof(struct ice_tx_desc))
+#define ICE_DESCS_FOR_CTX_DESC 1
+#define ICE_DESCS_FOR_SKB_DATA_PTR 1
+/* Tx descriptors needed, worst case */
+#define DESC_NEEDED (MAX_SKB_FRAGS + ICE_DESCS_FOR_CTX_DESC + \
+ ICE_DESCS_PER_CACHE_LINE + ICE_DESCS_FOR_SKB_DATA_PTR)
#define ICE_DESC_UNUSED(R) \
((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \
(R)->next_to_clean - (R)->next_to_use - 1)
diff --git a/drivers/net/ethernet/intel/ice/ice_type.h b/drivers/net/ethernet/intel/ice/ice_type.h
index 12f9432..f4dbc81 100644
--- a/drivers/net/ethernet/intel/ice/ice_type.h
+++ b/drivers/net/ethernet/intel/ice/ice_type.h
@@ -92,12 +92,12 @@ struct ice_link_status {
u64 phy_type_low;
u16 max_frame_size;
u16 link_speed;
+ u16 req_speeds;
u8 lse_ena; /* Link Status Event notification */
u8 link_info;
u8 an_info;
u8 ext_info;
u8 pacing;
- u8 req_speeds;
/* Refer to #define from module_type[ICE_MODULE_TYPE_TOTAL_BYTE] of
* ice_aqc_get_phy_caps structure
*/
diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
index 45f10f8..e71065f 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
@@ -348,7 +348,7 @@ static int ice_vsi_set_pvid(struct ice_vsi *vsi, u16 vid)
struct ice_vsi_ctx ctxt = { 0 };
enum ice_status status;
- ctxt.info.vlan_flags = ICE_AQ_VSI_VLAN_MODE_TAGGED |
+ ctxt.info.vlan_flags = ICE_AQ_VSI_VLAN_MODE_UNTAGGED |
ICE_AQ_VSI_PVLAN_INSERT_PVID |
ICE_AQ_VSI_VLAN_EMOD_STR;
ctxt.info.pvid = cpu_to_le16(vid);
@@ -2171,7 +2171,6 @@ static int ice_vc_process_vlan_msg(struct ice_vf *vf, u8 *msg, bool add_v)
if (!ice_vsi_add_vlan(vsi, vid)) {
vf->num_vlan++;
- set_bit(vid, vsi->active_vlans);
/* Enable VLAN pruning when VLAN 0 is added */
if (unlikely(!vid))
@@ -2190,7 +2189,6 @@ static int ice_vc_process_vlan_msg(struct ice_vf *vf, u8 *msg, bool add_v)
*/
if (!ice_vsi_kill_vlan(vsi, vid)) {
vf->num_vlan--;
- clear_bit(vid, vsi->active_vlans);
/* Disable VLAN pruning when removing VLAN 0 */
if (unlikely(!vid))
diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index 29ced6b..2b95dc9 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -53,13 +53,15 @@
* 2^40 * 10^-9 / 60 = 18.3 minutes.
*
* SYSTIM is converted to real time using a timecounter. As
- * timecounter_cyc2time() allows old timestamps, the timecounter
- * needs to be updated at least once per half of the SYSTIM interval.
- * Scheduling of delayed work is not very accurate, so we aim for 8
- * minutes to be sure the actual interval is shorter than 9.16 minutes.
+ * timecounter_cyc2time() allows old timestamps, the timecounter needs
+ * to be updated at least once per half of the SYSTIM interval.
+ * Scheduling of delayed work is not very accurate, and also the NIC
+ * clock can be adjusted to run up to 6% faster and the system clock
+ * up to 10% slower, so we aim for 6 minutes to be sure the actual
+ * interval in the NIC time is shorter than 9.16 minutes.
*/
-#define IGB_SYSTIM_OVERFLOW_PERIOD (HZ * 60 * 8)
+#define IGB_SYSTIM_OVERFLOW_PERIOD (HZ * 60 * 6)
#define IGB_PTP_TX_TIMEOUT (HZ * 15)
#define INCPERIOD_82576 BIT(E1000_TIMINCA_16NS_SHIFT)
#define INCVALUE_82576_MASK GENMASK(E1000_TIMINCA_16NS_SHIFT - 1, 0)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 5bfd349..3ba672e 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -494,7 +494,7 @@ struct mvneta_port {
#if defined(__LITTLE_ENDIAN)
struct mvneta_tx_desc {
u32 command; /* Options used by HW for packet transmitting.*/
- u16 reserverd1; /* csum_l4 (for future use) */
+ u16 reserved1; /* csum_l4 (for future use) */
u16 data_size; /* Data size of transmitted packet in bytes */
u32 buf_phys_addr; /* Physical addr of transmitted buffer */
u32 reserved2; /* hw_cmd - (for future use, PMT) */
@@ -519,7 +519,7 @@ struct mvneta_rx_desc {
#else
struct mvneta_tx_desc {
u16 data_size; /* Data size of transmitted packet in bytes */
- u16 reserverd1; /* csum_l4 (for future use) */
+ u16 reserved1; /* csum_l4 (for future use) */
u32 command; /* Options used by HW for packet transmitting.*/
u32 reserved2; /* hw_cmd - (for future use, PMT) */
u32 buf_phys_addr; /* Physical addr of transmitted buffer */
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
index 1857ee0..6f5153a 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -1006,7 +1006,6 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
ring->packets++;
}
ring->bytes += tx_info->nr_bytes;
- netdev_tx_sent_queue(ring->tx_queue, tx_info->nr_bytes);
AVG_PERF_COUNTER(priv->pstats.tx_pktsz_avg, skb->len);
if (tx_info->inl)
@@ -1044,7 +1043,10 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
netif_tx_stop_queue(ring->tx_queue);
ring->queue_stopped++;
}
- send_doorbell = !skb->xmit_more || netif_xmit_stopped(ring->tx_queue);
+
+ send_doorbell = __netdev_tx_sent_queue(ring->tx_queue,
+ tx_info->nr_bytes,
+ skb->xmit_more);
real_size = (real_size / 16) & 0x3f;
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index a2df12b..9bec9403 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -3568,7 +3568,6 @@ static int mlxsw_sp_cpu_policers_set(struct mlxsw_core *mlxsw_core)
burst_size = 7;
break;
case MLXSW_REG_HTGT_TRAP_GROUP_SP_IP2ME:
- is_bytes = true;
rate = 4 * 1024;
burst_size = 4;
break;
diff --git a/drivers/net/ethernet/qlogic/qed/qed_fcoe.c b/drivers/net/ethernet/qlogic/qed/qed_fcoe.c
index cc1b373..46dc93d 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_fcoe.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_fcoe.c
@@ -147,7 +147,8 @@ qed_sp_fcoe_func_start(struct qed_hwfn *p_hwfn,
"Cannot satisfy CQ amount. CQs requested %d, CQs available %d. Aborting function start\n",
fcoe_pf_params->num_cqs,
p_hwfn->hw_info.feat_num[QED_FCOE_CQ]);
- return -EINVAL;
+ rc = -EINVAL;
+ goto err;
}
p_data->mtu = cpu_to_le16(fcoe_pf_params->mtu);
@@ -156,14 +157,14 @@ qed_sp_fcoe_func_start(struct qed_hwfn *p_hwfn,
rc = qed_cxt_acquire_cid(p_hwfn, PROTOCOLID_FCOE, &dummy_cid);
if (rc)
- return rc;
+ goto err;
cxt_info.iid = dummy_cid;
rc = qed_cxt_get_cid_info(p_hwfn, &cxt_info);
if (rc) {
DP_NOTICE(p_hwfn, "Cannot find context info for dummy cid=%d\n",
dummy_cid);
- return rc;
+ goto err;
}
p_cxt = cxt_info.p_cxt;
SET_FIELD(p_cxt->tstorm_ag_context.flags3,
@@ -240,6 +241,10 @@ qed_sp_fcoe_func_start(struct qed_hwfn *p_hwfn,
rc = qed_spq_post(p_hwfn, p_ent, NULL);
return rc;
+
+err:
+ qed_sp_destroy_request(p_hwfn, p_ent);
+ return rc;
}
static int
diff --git a/drivers/net/ethernet/qlogic/qed/qed_iscsi.c b/drivers/net/ethernet/qlogic/qed/qed_iscsi.c
index 1135387..4f8a685 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_iscsi.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_iscsi.c
@@ -200,6 +200,7 @@ qed_sp_iscsi_func_start(struct qed_hwfn *p_hwfn,
"Cannot satisfy CQ amount. Queues requested %d, CQs available %d. Aborting function start\n",
p_params->num_queues,
p_hwfn->hw_info.feat_num[QED_ISCSI_CQ]);
+ qed_sp_destroy_request(p_hwfn, p_ent);
return -EINVAL;
}
diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c
index 82a1bd1..67c02ea93 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_l2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c
@@ -740,8 +740,7 @@ int qed_sp_vport_update(struct qed_hwfn *p_hwfn,
rc = qed_sp_vport_update_rss(p_hwfn, p_ramrod, p_rss_params);
if (rc) {
- /* Return spq entry which is taken in qed_sp_init_request()*/
- qed_spq_return_entry(p_hwfn, p_ent);
+ qed_sp_destroy_request(p_hwfn, p_ent);
return rc;
}
@@ -1355,6 +1354,7 @@ qed_filter_ucast_common(struct qed_hwfn *p_hwfn,
DP_NOTICE(p_hwfn,
"%d is not supported yet\n",
p_filter_cmd->opcode);
+ qed_sp_destroy_request(p_hwfn, *pp_ent);
return -EINVAL;
}
@@ -2056,13 +2056,13 @@ qed_configure_rfs_ntuple_filter(struct qed_hwfn *p_hwfn,
} else {
rc = qed_fw_vport(p_hwfn, p_params->vport_id, &abs_vport_id);
if (rc)
- return rc;
+ goto err;
if (p_params->qid != QED_RFS_NTUPLE_QID_RSS) {
rc = qed_fw_l2_queue(p_hwfn, p_params->qid,
&abs_rx_q_id);
if (rc)
- return rc;
+ goto err;
p_ramrod->rx_qid_valid = 1;
p_ramrod->rx_qid = cpu_to_le16(abs_rx_q_id);
@@ -2083,6 +2083,10 @@ qed_configure_rfs_ntuple_filter(struct qed_hwfn *p_hwfn,
(u64)p_params->addr, p_params->length);
return qed_spq_post(p_hwfn, p_ent, NULL);
+
+err:
+ qed_sp_destroy_request(p_hwfn, p_ent);
+ return rc;
}
int qed_get_rxq_coalesce(struct qed_hwfn *p_hwfn,
diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
index f40f654..a96364df 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
@@ -1944,9 +1944,12 @@ int qed_mcp_trans_speed_mask(struct qed_hwfn *p_hwfn,
struct qed_ptt *p_ptt, u32 *p_speed_mask)
{
u32 transceiver_type, transceiver_state;
+ int ret;
- qed_mcp_get_transceiver_data(p_hwfn, p_ptt, &transceiver_state,
- &transceiver_type);
+ ret = qed_mcp_get_transceiver_data(p_hwfn, p_ptt, &transceiver_state,
+ &transceiver_type);
+ if (ret)
+ return ret;
if (qed_is_transceiver_ready(transceiver_state, transceiver_type) ==
false)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_rdma.c b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
index c71391b..6211343 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_rdma.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
@@ -1514,6 +1514,7 @@ qed_rdma_register_tid(void *rdma_cxt,
default:
rc = -EINVAL;
DP_VERBOSE(p_hwfn, QED_MSG_RDMA, "rc = %d\n", rc);
+ qed_sp_destroy_request(p_hwfn, p_ent);
return rc;
}
SET_FIELD(p_ramrod->flags1,
diff --git a/drivers/net/ethernet/qlogic/qed/qed_roce.c b/drivers/net/ethernet/qlogic/qed/qed_roce.c
index f9167d1..e49fada 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_roce.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_roce.c
@@ -745,6 +745,7 @@ static int qed_roce_sp_destroy_qp_responder(struct qed_hwfn *p_hwfn,
DP_NOTICE(p_hwfn,
"qed destroy responder failed: cannot allocate memory (ramrod). rc = %d\n",
rc);
+ qed_sp_destroy_request(p_hwfn, p_ent);
return rc;
}
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp.h b/drivers/net/ethernet/qlogic/qed/qed_sp.h
index e95431f..3157c0d 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sp.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_sp.h
@@ -167,6 +167,9 @@ struct qed_spq_entry {
enum spq_mode comp_mode;
struct qed_spq_comp_cb comp_cb;
struct qed_spq_comp_done comp_done; /* SPQ_MODE_EBLOCK */
+
+ /* Posted entry for unlimited list entry in EBLOCK mode */
+ struct qed_spq_entry *post_ent;
};
struct qed_eq {
@@ -396,6 +399,17 @@ struct qed_sp_init_data {
struct qed_spq_comp_cb *p_comp_data;
};
+/**
+ * @brief Returns a SPQ entry to the pool / frees the entry if allocated.
+ * Should be called on in error flows after initializing the SPQ entry
+ * and before posting it.
+ *
+ * @param p_hwfn
+ * @param p_ent
+ */
+void qed_sp_destroy_request(struct qed_hwfn *p_hwfn,
+ struct qed_spq_entry *p_ent);
+
int qed_sp_init_request(struct qed_hwfn *p_hwfn,
struct qed_spq_entry **pp_ent,
u8 cmd,
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c b/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c
index 77b6248..888274f 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c
@@ -47,6 +47,19 @@
#include "qed_sp.h"
#include "qed_sriov.h"
+void qed_sp_destroy_request(struct qed_hwfn *p_hwfn,
+ struct qed_spq_entry *p_ent)
+{
+ /* qed_spq_get_entry() can either get an entry from the free_pool,
+ * or, if no entries are left, allocate a new entry and add it to
+ * the unlimited_pending list.
+ */
+ if (p_ent->queue == &p_hwfn->p_spq->unlimited_pending)
+ kfree(p_ent);
+ else
+ qed_spq_return_entry(p_hwfn, p_ent);
+}
+
int qed_sp_init_request(struct qed_hwfn *p_hwfn,
struct qed_spq_entry **pp_ent,
u8 cmd, u8 protocol, struct qed_sp_init_data *p_data)
@@ -80,7 +93,7 @@ int qed_sp_init_request(struct qed_hwfn *p_hwfn,
case QED_SPQ_MODE_BLOCK:
if (!p_data->p_comp_data)
- return -EINVAL;
+ goto err;
p_ent->comp_cb.cookie = p_data->p_comp_data->cookie;
break;
@@ -95,7 +108,7 @@ int qed_sp_init_request(struct qed_hwfn *p_hwfn,
default:
DP_NOTICE(p_hwfn, "Unknown SPQE completion mode %d\n",
p_ent->comp_mode);
- return -EINVAL;
+ goto err;
}
DP_VERBOSE(p_hwfn, QED_MSG_SPQ,
@@ -109,6 +122,11 @@ int qed_sp_init_request(struct qed_hwfn *p_hwfn,
memset(&p_ent->ramrod, 0, sizeof(p_ent->ramrod));
return 0;
+
+err:
+ qed_sp_destroy_request(p_hwfn, p_ent);
+
+ return -EINVAL;
}
static enum tunnel_clss qed_tunn_clss_to_fw_clss(u8 type)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_spq.c b/drivers/net/ethernet/qlogic/qed/qed_spq.c
index c4a6274..0a9c5bb 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_spq.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_spq.c
@@ -142,6 +142,7 @@ static int qed_spq_block(struct qed_hwfn *p_hwfn,
DP_INFO(p_hwfn, "Ramrod is stuck, requesting MCP drain\n");
rc = qed_mcp_drain(p_hwfn, p_ptt);
+ qed_ptt_release(p_hwfn, p_ptt);
if (rc) {
DP_NOTICE(p_hwfn, "MCP drain failed\n");
goto err;
@@ -150,18 +151,15 @@ static int qed_spq_block(struct qed_hwfn *p_hwfn,
/* Retry after drain */
rc = __qed_spq_block(p_hwfn, p_ent, p_fw_ret, true);
if (!rc)
- goto out;
+ return 0;
comp_done = (struct qed_spq_comp_done *)p_ent->comp_cb.cookie;
- if (comp_done->done == 1)
+ if (comp_done->done == 1) {
if (p_fw_ret)
*p_fw_ret = comp_done->fw_return_code;
-out:
- qed_ptt_release(p_hwfn, p_ptt);
- return 0;
-
+ return 0;
+ }
err:
- qed_ptt_release(p_hwfn, p_ptt);
DP_NOTICE(p_hwfn,
"Ramrod is stuck [CID %08x cmd %02x protocol %02x echo %04x]\n",
le32_to_cpu(p_ent->elem.hdr.cid),
@@ -685,6 +683,8 @@ static int qed_spq_add_entry(struct qed_hwfn *p_hwfn,
/* EBLOCK responsible to free the allocated p_ent */
if (p_ent->comp_mode != QED_SPQ_MODE_EBLOCK)
kfree(p_ent);
+ else
+ p_ent->post_ent = p_en2;
p_ent = p_en2;
}
@@ -767,6 +767,25 @@ static int qed_spq_pend_post(struct qed_hwfn *p_hwfn)
SPQ_HIGH_PRI_RESERVE_DEFAULT);
}
+/* Avoid overriding of SPQ entries when getting out-of-order completions, by
+ * marking the completions in a bitmap and increasing the chain consumer only
+ * for the first successive completed entries.
+ */
+static void qed_spq_comp_bmap_update(struct qed_hwfn *p_hwfn, __le16 echo)
+{
+ u16 pos = le16_to_cpu(echo) % SPQ_RING_SIZE;
+ struct qed_spq *p_spq = p_hwfn->p_spq;
+
+ __set_bit(pos, p_spq->p_comp_bitmap);
+ while (test_bit(p_spq->comp_bitmap_idx,
+ p_spq->p_comp_bitmap)) {
+ __clear_bit(p_spq->comp_bitmap_idx,
+ p_spq->p_comp_bitmap);
+ p_spq->comp_bitmap_idx++;
+ qed_chain_return_produced(&p_spq->chain);
+ }
+}
+
int qed_spq_post(struct qed_hwfn *p_hwfn,
struct qed_spq_entry *p_ent, u8 *fw_return_code)
{
@@ -824,11 +843,12 @@ int qed_spq_post(struct qed_hwfn *p_hwfn,
p_ent->queue == &p_spq->unlimited_pending);
if (p_ent->queue == &p_spq->unlimited_pending) {
- /* This is an allocated p_ent which does not need to
- * return to pool.
- */
+ struct qed_spq_entry *p_post_ent = p_ent->post_ent;
+
kfree(p_ent);
- return rc;
+
+ /* Return the entry which was actually posted */
+ p_ent = p_post_ent;
}
if (rc)
@@ -842,7 +862,7 @@ int qed_spq_post(struct qed_hwfn *p_hwfn,
spq_post_fail2:
spin_lock_bh(&p_spq->lock);
list_del(&p_ent->list);
- qed_chain_return_produced(&p_spq->chain);
+ qed_spq_comp_bmap_update(p_hwfn, p_ent->elem.hdr.echo);
spq_post_fail:
/* return to the free pool */
@@ -874,25 +894,8 @@ int qed_spq_completion(struct qed_hwfn *p_hwfn,
spin_lock_bh(&p_spq->lock);
list_for_each_entry_safe(p_ent, tmp, &p_spq->completion_pending, list) {
if (p_ent->elem.hdr.echo == echo) {
- u16 pos = le16_to_cpu(echo) % SPQ_RING_SIZE;
-
list_del(&p_ent->list);
-
- /* Avoid overriding of SPQ entries when getting
- * out-of-order completions, by marking the completions
- * in a bitmap and increasing the chain consumer only
- * for the first successive completed entries.
- */
- __set_bit(pos, p_spq->p_comp_bitmap);
-
- while (test_bit(p_spq->comp_bitmap_idx,
- p_spq->p_comp_bitmap)) {
- __clear_bit(p_spq->comp_bitmap_idx,
- p_spq->p_comp_bitmap);
- p_spq->comp_bitmap_idx++;
- qed_chain_return_produced(&p_spq->chain);
- }
-
+ qed_spq_comp_bmap_update(p_hwfn, echo);
p_spq->comp_count++;
found = p_ent;
break;
@@ -931,11 +934,9 @@ int qed_spq_completion(struct qed_hwfn *p_hwfn,
QED_MSG_SPQ,
"Got a completion without a callback function\n");
- if ((found->comp_mode != QED_SPQ_MODE_EBLOCK) ||
- (found->queue == &p_spq->unlimited_pending))
+ if (found->comp_mode != QED_SPQ_MODE_EBLOCK)
/* EBLOCK is responsible for returning its own entry into the
- * free list, unless it originally added the entry into the
- * unlimited pending list.
+ * free list.
*/
qed_spq_return_entry(p_hwfn, found);
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
index 9b08a9d..ca6290f 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
@@ -101,6 +101,7 @@ static int qed_sp_vf_start(struct qed_hwfn *p_hwfn, struct qed_vf_info *p_vf)
default:
DP_NOTICE(p_hwfn, "Unknown VF personality %d\n",
p_hwfn->hw_info.personality);
+ qed_sp_destroy_request(p_hwfn, p_ent);
return -EINVAL;
}
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
index 9647578..14f26bf 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
@@ -459,7 +459,7 @@ static int qlcnic_tx_pkt(struct qlcnic_adapter *adapter,
struct cmd_desc_type0 *first_desc, struct sk_buff *skb,
struct qlcnic_host_tx_ring *tx_ring)
{
- u8 l4proto, opcode = 0, hdr_len = 0;
+ u8 l4proto, opcode = 0, hdr_len = 0, tag_vlan = 0;
u16 flags = 0, vlan_tci = 0;
int copied, offset, copy_len, size;
struct cmd_desc_type0 *hwdesc;
@@ -472,14 +472,16 @@ static int qlcnic_tx_pkt(struct qlcnic_adapter *adapter,
flags = QLCNIC_FLAGS_VLAN_TAGGED;
vlan_tci = ntohs(vh->h_vlan_TCI);
protocol = ntohs(vh->h_vlan_encapsulated_proto);
+ tag_vlan = 1;
} else if (skb_vlan_tag_present(skb)) {
flags = QLCNIC_FLAGS_VLAN_OOB;
vlan_tci = skb_vlan_tag_get(skb);
+ tag_vlan = 1;
}
if (unlikely(adapter->tx_pvid)) {
- if (vlan_tci && !(adapter->flags & QLCNIC_TAGGING_ENABLED))
+ if (tag_vlan && !(adapter->flags & QLCNIC_TAGGING_ENABLED))
return -EIO;
- if (vlan_tci && (adapter->flags & QLCNIC_TAGGING_ENABLED))
+ if (tag_vlan && (adapter->flags & QLCNIC_TAGGING_ENABLED))
goto set_flags;
flags = QLCNIC_FLAGS_VLAN_OOB;
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
index 0afc3d3..d11c16a 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
@@ -234,7 +234,7 @@ int rmnet_vnd_newlink(u8 id, struct net_device *rmnet_dev,
struct net_device *real_dev,
struct rmnet_endpoint *ep)
{
- struct rmnet_priv *priv;
+ struct rmnet_priv *priv = netdev_priv(rmnet_dev);
int rc;
if (ep->egress_dev)
@@ -247,6 +247,8 @@ int rmnet_vnd_newlink(u8 id, struct net_device *rmnet_dev,
rmnet_dev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
rmnet_dev->hw_features |= NETIF_F_SG;
+ priv->real_dev = real_dev;
+
rc = register_netdevice(rmnet_dev);
if (!rc) {
ep->egress_dev = rmnet_dev;
@@ -255,9 +257,7 @@ int rmnet_vnd_newlink(u8 id, struct net_device *rmnet_dev,
rmnet_dev->rtnl_link_ops = &rmnet_link_ops;
- priv = netdev_priv(rmnet_dev);
priv->mux_id = id;
- priv->real_dev = real_dev;
netdev_dbg(rmnet_dev, "rmnet dev created\n");
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index b1b305f..272b9ca6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -365,7 +365,8 @@ struct dma_features {
/* GMAC TX FIFO is 8K, Rx FIFO is 16K */
#define BUF_SIZE_16KiB 16384
-#define BUF_SIZE_8KiB 8192
+/* RX Buffer size must be < 8191 and multiple of 4/8/16 bytes */
+#define BUF_SIZE_8KiB 8188
#define BUF_SIZE_4KiB 4096
#define BUF_SIZE_2KiB 2048
diff --git a/drivers/net/ethernet/stmicro/stmmac/descs_com.h b/drivers/net/ethernet/stmicro/stmmac/descs_com.h
index ca9d7e4..40d6356 100644
--- a/drivers/net/ethernet/stmicro/stmmac/descs_com.h
+++ b/drivers/net/ethernet/stmicro/stmmac/descs_com.h
@@ -31,7 +31,7 @@
/* Enhanced descriptors */
static inline void ehn_desc_rx_set_on_ring(struct dma_desc *p, int end)
{
- p->des1 |= cpu_to_le32(((BUF_SIZE_8KiB - 1)
+ p->des1 |= cpu_to_le32((BUF_SIZE_8KiB
<< ERDES1_BUFFER2_SIZE_SHIFT)
& ERDES1_BUFFER2_SIZE_MASK);
diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index 77914c8..5ef91a7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -262,7 +262,7 @@ static void enh_desc_init_rx_desc(struct dma_desc *p, int disable_rx_ic,
int mode, int end)
{
p->des0 |= cpu_to_le32(RDES0_OWN);
- p->des1 |= cpu_to_le32((BUF_SIZE_8KiB - 1) & ERDES1_BUFFER1_SIZE_MASK);
+ p->des1 |= cpu_to_le32(BUF_SIZE_8KiB & ERDES1_BUFFER1_SIZE_MASK);
if (mode == STMMAC_CHAIN_MODE)
ehn_desc_rx_set_on_chain(p);
diff --git a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
index abc3f85..d8c5bc4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
+++ b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
@@ -140,7 +140,7 @@ static void clean_desc3(void *priv_ptr, struct dma_desc *p)
static int set_16kib_bfsize(int mtu)
{
int ret = 0;
- if (unlikely(mtu >= BUF_SIZE_8KiB))
+ if (unlikely(mtu > BUF_SIZE_8KiB))
ret = BUF_SIZE_16KiB;
return ret;
}
diff --git a/drivers/net/fddi/defza.c b/drivers/net/fddi/defza.c
index 3b7f10a..c5cae8e 100644
--- a/drivers/net/fddi/defza.c
+++ b/drivers/net/fddi/defza.c
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+
/* FDDI network adapter driver for DEC FDDIcontroller 700/700-C devices.
*
* Copyright (c) 2018 Maciej W. Rozycki
@@ -56,7 +56,7 @@
#define DRV_VERSION "v.1.1.4"
#define DRV_RELDATE "Oct 6 2018"
-static char version[] =
+static const char version[] =
DRV_NAME ": " DRV_VERSION " " DRV_RELDATE " Maciej W. Rozycki\n";
MODULE_AUTHOR("Maciej W. Rozycki <[email protected]>");
@@ -784,7 +784,7 @@ static void fza_rx(struct net_device *dev)
static void fza_tx_smt(struct net_device *dev)
{
struct fza_private *fp = netdev_priv(dev);
- struct fza_buffer_tx __iomem *smt_tx_ptr, *skb_data_ptr;
+ struct fza_buffer_tx __iomem *smt_tx_ptr;
int i, len;
u32 own;
@@ -799,6 +799,7 @@ static void fza_tx_smt(struct net_device *dev)
if (!netif_queue_stopped(dev)) {
if (dev_nit_active(dev)) {
+ struct fza_buffer_tx *skb_data_ptr;
struct sk_buff *skb;
/* Length must be a multiple of 4 as only word
diff --git a/drivers/net/fddi/defza.h b/drivers/net/fddi/defza.h
index b06acf3..93bda61 100644
--- a/drivers/net/fddi/defza.h
+++ b/drivers/net/fddi/defza.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0+ */
/* FDDI network adapter driver for DEC FDDIcontroller 700/700-C devices.
*
* Copyright (c) 2018 Maciej W. Rozycki
@@ -235,6 +235,7 @@ struct fza_ring_cmd {
#define FZA_RING_CMD 0x200400 /* command ring address */
#define FZA_RING_CMD_SIZE 0x40 /* command descriptor ring
* size
+ */
/* Command constants. */
#define FZA_RING_CMD_MASK 0x7fffffff
#define FZA_RING_CMD_NOP 0x00000000 /* nop */
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index e86ea10..7045370 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -92,7 +92,7 @@ static int bcm54612e_config_init(struct phy_device *phydev)
return 0;
}
-static int bcm5481x_config(struct phy_device *phydev)
+static int bcm54xx_config_clock_delay(struct phy_device *phydev)
{
int rc, val;
@@ -429,7 +429,7 @@ static int bcm5481_config_aneg(struct phy_device *phydev)
ret = genphy_config_aneg(phydev);
/* Then we can set up the delay. */
- bcm5481x_config(phydev);
+ bcm54xx_config_clock_delay(phydev);
if (of_property_read_bool(np, "enet-phy-lane-swap")) {
/* Lane Swap - Undocumented register...magic! */
@@ -442,6 +442,19 @@ static int bcm5481_config_aneg(struct phy_device *phydev)
return ret;
}
+static int bcm54616s_config_aneg(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Aneg firsly. */
+ ret = genphy_config_aneg(phydev);
+
+ /* Then we can set up the delay. */
+ bcm54xx_config_clock_delay(phydev);
+
+ return ret;
+}
+
static int brcm_phy_setbits(struct phy_device *phydev, int reg, int set)
{
int val;
@@ -636,6 +649,7 @@ static struct phy_driver broadcom_drivers[] = {
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = bcm54xx_config_init,
+ .config_aneg = bcm54616s_config_aneg,
.ack_interrupt = bcm_phy_ack_intr,
.config_intr = bcm_phy_config_intr,
}, {
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 7fc8508..271e8ad 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -220,7 +220,7 @@ static struct phy_driver realtek_drvs[] = {
.flags = PHY_HAS_INTERRUPT,
}, {
.phy_id = 0x001cc816,
- .name = "RTL8201F 10/100Mbps Ethernet",
+ .name = "RTL8201F Fast Ethernet",
.phy_id_mask = 0x001fffff,
.features = PHY_BASIC_FEATURES,
.flags = PHY_HAS_INTERRUPT,
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 262e7a3..f2d01cb 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -1321,6 +1321,8 @@ static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf)
dev->net->ethtool_ops = &smsc95xx_ethtool_ops;
dev->net->flags |= IFF_MULTICAST;
dev->net->hard_header_len += SMSC95XX_TX_OVERHEAD_CSUM;
+ dev->net->min_mtu = ETH_MIN_MTU;
+ dev->net->max_mtu = ETH_DATA_LEN;
dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
pdata->dev = dev;
@@ -1598,6 +1600,8 @@ static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message)
return ret;
}
+ cancel_delayed_work_sync(&pdata->carrier_check);
+
if (pdata->suspend_flags) {
netdev_warn(dev->net, "error during last resume\n");
pdata->suspend_flags = 0;
@@ -1840,6 +1844,11 @@ static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message)
*/
if (ret && PMSG_IS_AUTO(message))
usbnet_resume(intf);
+
+ if (ret)
+ schedule_delayed_work(&pdata->carrier_check,
+ CARRIER_CHECK_DELAY);
+
return ret;
}
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 2e65be8..559d567 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -1519,8 +1519,10 @@ static void __nvme_revalidate_disk(struct gendisk *disk, struct nvme_id_ns *id)
if (ns->ndev)
nvme_nvm_update_nvm_info(ns);
#ifdef CONFIG_NVME_MULTIPATH
- if (ns->head->disk)
+ if (ns->head->disk) {
nvme_update_disk_info(ns->head->disk, ns, id);
+ blk_queue_stack_limits(ns->head->disk->queue, ns->queue);
+ }
#endif
}
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 5e3cc8c..9901afd8 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -285,6 +285,7 @@ int nvme_mpath_alloc_disk(struct nvme_ctrl *ctrl, struct nvme_ns_head *head)
blk_queue_flag_set(QUEUE_FLAG_NONROT, q);
/* set to a default value for 512 until disk is validated */
blk_queue_logical_block_size(q, 512);
+ blk_set_stacking_limits(&q->limits);
/* we need to propagate up the VMC settings */
if (ctrl->vwc & NVME_CTRL_VWC_PRESENT)
diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
index f4efe28..a5f9bbc 100644
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -420,7 +420,7 @@ static void nvmet_p2pmem_ns_add_p2p(struct nvmet_ctrl *ctrl,
struct pci_dev *p2p_dev;
int ret;
- if (!ctrl->p2p_client)
+ if (!ctrl->p2p_client || !ns->use_p2pmem)
return;
if (ns->p2p_dev) {
diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c
index ddce100..3f7971d3 100644
--- a/drivers/nvme/target/rdma.c
+++ b/drivers/nvme/target/rdma.c
@@ -122,7 +122,6 @@ struct nvmet_rdma_device {
int inline_page_count;
};
-static struct workqueue_struct *nvmet_rdma_delete_wq;
static bool nvmet_rdma_use_srq;
module_param_named(use_srq, nvmet_rdma_use_srq, bool, 0444);
MODULE_PARM_DESC(use_srq, "Use shared receive queue.");
@@ -1274,12 +1273,12 @@ static int nvmet_rdma_queue_connect(struct rdma_cm_id *cm_id,
if (queue->host_qid == 0) {
/* Let inflight controller teardown complete */
- flush_workqueue(nvmet_rdma_delete_wq);
+ flush_scheduled_work();
}
ret = nvmet_rdma_cm_accept(cm_id, queue, &event->param.conn);
if (ret) {
- queue_work(nvmet_rdma_delete_wq, &queue->release_work);
+ schedule_work(&queue->release_work);
/* Destroying rdma_cm id is not needed here */
return 0;
}
@@ -1344,7 +1343,7 @@ static void __nvmet_rdma_queue_disconnect(struct nvmet_rdma_queue *queue)
if (disconnect) {
rdma_disconnect(queue->cm_id);
- queue_work(nvmet_rdma_delete_wq, &queue->release_work);
+ schedule_work(&queue->release_work);
}
}
@@ -1374,7 +1373,7 @@ static void nvmet_rdma_queue_connect_fail(struct rdma_cm_id *cm_id,
mutex_unlock(&nvmet_rdma_queue_mutex);
pr_err("failed to connect queue %d\n", queue->idx);
- queue_work(nvmet_rdma_delete_wq, &queue->release_work);
+ schedule_work(&queue->release_work);
}
/**
@@ -1656,17 +1655,8 @@ static int __init nvmet_rdma_init(void)
if (ret)
goto err_ib_client;
- nvmet_rdma_delete_wq = alloc_workqueue("nvmet-rdma-delete-wq",
- WQ_UNBOUND | WQ_MEM_RECLAIM | WQ_SYSFS, 0);
- if (!nvmet_rdma_delete_wq) {
- ret = -ENOMEM;
- goto err_unreg_transport;
- }
-
return 0;
-err_unreg_transport:
- nvmet_unregister_transport(&nvmet_rdma_ops);
err_ib_client:
ib_unregister_client(&nvmet_rdma_ib_client);
return ret;
@@ -1674,7 +1664,6 @@ static int __init nvmet_rdma_init(void)
static void __exit nvmet_rdma_exit(void)
{
- destroy_workqueue(nvmet_rdma_delete_wq);
nvmet_unregister_transport(&nvmet_rdma_ops);
ib_unregister_client(&nvmet_rdma_ib_client);
WARN_ON_ONCE(!list_empty(&nvmet_rdma_queue_list));
diff --git a/drivers/of/device.c b/drivers/of/device.c
index 0f27fad..5592437 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -149,9 +149,11 @@ int of_dma_configure(struct device *dev, struct device_node *np, bool force_dma)
* set by the driver.
*/
mask = DMA_BIT_MASK(ilog2(dma_addr + size - 1) + 1);
- dev->bus_dma_mask = mask;
dev->coherent_dma_mask &= mask;
*dev->dma_mask &= mask;
+ /* ...but only set bus mask if we found valid dma-ranges earlier */
+ if (!ret)
+ dev->bus_dma_mask = mask;
coherent = of_dma_is_coherent(np);
dev_dbg(dev, "device is%sdma coherent\n",
diff --git a/drivers/of/of_numa.c b/drivers/of/of_numa.c
index 35c64a4..fe6b136 100644
--- a/drivers/of/of_numa.c
+++ b/drivers/of/of_numa.c
@@ -104,9 +104,14 @@ static int __init of_numa_parse_distance_map_v1(struct device_node *map)
distance = of_read_number(matrix, 1);
matrix++;
+ if ((nodea == nodeb && distance != LOCAL_DISTANCE) ||
+ (nodea != nodeb && distance <= LOCAL_DISTANCE)) {
+ pr_err("Invalid distance[node%d -> node%d] = %d\n",
+ nodea, nodeb, distance);
+ return -EINVAL;
+ }
+
numa_set_distance(nodea, nodeb, distance);
- pr_debug("distance[node%d -> node%d] = %d\n",
- nodea, nodeb, distance);
/* Set default distance of node B->A same as A->B */
if (nodeb > nodea)
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 6843bc7..04e294d 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -87,6 +87,18 @@ struct qeth_dbf_info {
#define SENSE_RESETTING_EVENT_BYTE 1
#define SENSE_RESETTING_EVENT_FLAG 0x80
+static inline u32 qeth_get_device_id(struct ccw_device *cdev)
+{
+ struct ccw_dev_id dev_id;
+ u32 id;
+
+ ccw_device_get_id(cdev, &dev_id);
+ id = dev_id.devno;
+ id |= (u32) (dev_id.ssid << 16);
+
+ return id;
+}
+
/*
* Common IO related definitions
*/
@@ -97,7 +109,8 @@ struct qeth_dbf_info {
#define CARD_RDEV_ID(card) dev_name(&card->read.ccwdev->dev)
#define CARD_WDEV_ID(card) dev_name(&card->write.ccwdev->dev)
#define CARD_DDEV_ID(card) dev_name(&card->data.ccwdev->dev)
-#define CHANNEL_ID(channel) dev_name(&channel->ccwdev->dev)
+#define CCW_DEVID(cdev) (qeth_get_device_id(cdev))
+#define CARD_DEVID(card) (CCW_DEVID(CARD_RDEV(card)))
/**
* card stuff
@@ -830,6 +843,11 @@ struct qeth_trap_id {
/*some helper functions*/
#define QETH_CARD_IFNAME(card) (((card)->dev)? (card)->dev->name : "")
+static inline bool qeth_netdev_is_registered(struct net_device *dev)
+{
+ return dev->netdev_ops != NULL;
+}
+
static inline void qeth_scrub_qdio_buffer(struct qdio_buffer *buf,
unsigned int elements)
{
@@ -973,7 +991,7 @@ int qeth_wait_for_threads(struct qeth_card *, unsigned long);
int qeth_do_run_thread(struct qeth_card *, unsigned long);
void qeth_clear_thread_start_bit(struct qeth_card *, unsigned long);
void qeth_clear_thread_running_bit(struct qeth_card *, unsigned long);
-int qeth_core_hardsetup_card(struct qeth_card *);
+int qeth_core_hardsetup_card(struct qeth_card *card, bool *carrier_ok);
void qeth_print_status_message(struct qeth_card *);
int qeth_init_qdio_queues(struct qeth_card *);
int qeth_send_ipa_cmd(struct qeth_card *, struct qeth_cmd_buffer *,
@@ -1028,11 +1046,6 @@ int qeth_configure_cq(struct qeth_card *, enum qeth_cq);
int qeth_hw_trap(struct qeth_card *, enum qeth_diags_trap_action);
void qeth_trace_features(struct qeth_card *);
void qeth_close_dev(struct qeth_card *);
-int qeth_send_setassparms(struct qeth_card *, struct qeth_cmd_buffer *, __u16,
- long,
- int (*reply_cb)(struct qeth_card *,
- struct qeth_reply *, unsigned long),
- void *);
int qeth_setassparms_cb(struct qeth_card *, struct qeth_reply *, unsigned long);
struct qeth_cmd_buffer *qeth_get_setassparms_cmd(struct qeth_card *,
enum qeth_ipa_funcs,
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 3274f13..4bce5ae 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -167,6 +167,8 @@ const char *qeth_get_cardname_short(struct qeth_card *card)
return "OSD_1000";
case QETH_LINK_TYPE_10GBIT_ETH:
return "OSD_10GIG";
+ case QETH_LINK_TYPE_25GBIT_ETH:
+ return "OSD_25GIG";
case QETH_LINK_TYPE_LANE_ETH100:
return "OSD_FE_LANE";
case QETH_LINK_TYPE_LANE_TR:
@@ -554,8 +556,8 @@ static int __qeth_issue_next_read(struct qeth_card *card)
if (!iob) {
dev_warn(&card->gdev->dev, "The qeth device driver "
"failed to recover an error on the device\n");
- QETH_DBF_MESSAGE(2, "%s issue_next_read failed: no iob "
- "available\n", dev_name(&card->gdev->dev));
+ QETH_DBF_MESSAGE(2, "issue_next_read on device %x failed: no iob available\n",
+ CARD_DEVID(card));
return -ENOMEM;
}
qeth_setup_ccw(channel->ccw, CCW_CMD_READ, QETH_BUFSIZE, iob->data);
@@ -563,8 +565,8 @@ static int __qeth_issue_next_read(struct qeth_card *card)
rc = ccw_device_start(channel->ccwdev, channel->ccw,
(addr_t) iob, 0, 0);
if (rc) {
- QETH_DBF_MESSAGE(2, "%s error in starting next read ccw! "
- "rc=%i\n", dev_name(&card->gdev->dev), rc);
+ QETH_DBF_MESSAGE(2, "error %i on device %x when starting next read ccw!\n",
+ rc, CARD_DEVID(card));
atomic_set(&channel->irq_pending, 0);
card->read_or_write_problem = 1;
qeth_schedule_recovery(card);
@@ -613,16 +615,14 @@ static void qeth_issue_ipa_msg(struct qeth_ipa_cmd *cmd, int rc,
const char *ipa_name;
int com = cmd->hdr.command;
ipa_name = qeth_get_ipa_cmd_name(com);
+
if (rc)
- QETH_DBF_MESSAGE(2, "IPA: %s(x%X) for %s/%s returned "
- "x%X \"%s\"\n",
- ipa_name, com, dev_name(&card->gdev->dev),
- QETH_CARD_IFNAME(card), rc,
- qeth_get_ipa_msg(rc));
+ QETH_DBF_MESSAGE(2, "IPA: %s(%#x) for device %x returned %#x \"%s\"\n",
+ ipa_name, com, CARD_DEVID(card), rc,
+ qeth_get_ipa_msg(rc));
else
- QETH_DBF_MESSAGE(5, "IPA: %s(x%X) for %s/%s succeeded\n",
- ipa_name, com, dev_name(&card->gdev->dev),
- QETH_CARD_IFNAME(card));
+ QETH_DBF_MESSAGE(5, "IPA: %s(%#x) for device %x succeeded\n",
+ ipa_name, com, CARD_DEVID(card));
}
static struct qeth_ipa_cmd *qeth_check_ipa_data(struct qeth_card *card,
@@ -711,7 +711,7 @@ static int qeth_check_idx_response(struct qeth_card *card,
QETH_DBF_HEX(CTRL, 2, buffer, QETH_DBF_CTRL_LEN);
if ((buffer[2] & 0xc0) == 0xc0) {
- QETH_DBF_MESSAGE(2, "received an IDX TERMINATE with cause code %#02x\n",
+ QETH_DBF_MESSAGE(2, "received an IDX TERMINATE with cause code %#04x\n",
buffer[4]);
QETH_CARD_TEXT(card, 2, "ckidxres");
QETH_CARD_TEXT(card, 2, " idxterm");
@@ -972,8 +972,8 @@ static int qeth_get_problem(struct qeth_card *card, struct ccw_device *cdev,
QETH_CARD_TEXT(card, 2, "CGENCHK");
dev_warn(&cdev->dev, "The qeth device driver "
"failed to recover an error on the device\n");
- QETH_DBF_MESSAGE(2, "%s check on device dstat=x%x, cstat=x%x\n",
- dev_name(&cdev->dev), dstat, cstat);
+ QETH_DBF_MESSAGE(2, "check on channel %x with dstat=%#x, cstat=%#x\n",
+ CCW_DEVID(cdev), dstat, cstat);
print_hex_dump(KERN_WARNING, "qeth: irb ", DUMP_PREFIX_OFFSET,
16, 1, irb, 64, 1);
return 1;
@@ -1013,8 +1013,8 @@ static long qeth_check_irb_error(struct qeth_card *card,
switch (PTR_ERR(irb)) {
case -EIO:
- QETH_DBF_MESSAGE(2, "%s i/o-error on device\n",
- dev_name(&cdev->dev));
+ QETH_DBF_MESSAGE(2, "i/o-error on channel %x\n",
+ CCW_DEVID(cdev));
QETH_CARD_TEXT(card, 2, "ckirberr");
QETH_CARD_TEXT_(card, 2, " rc%d", -EIO);
break;
@@ -1031,8 +1031,8 @@ static long qeth_check_irb_error(struct qeth_card *card,
}
break;
default:
- QETH_DBF_MESSAGE(2, "%s unknown error %ld on device\n",
- dev_name(&cdev->dev), PTR_ERR(irb));
+ QETH_DBF_MESSAGE(2, "unknown error %ld on channel %x\n",
+ PTR_ERR(irb), CCW_DEVID(cdev));
QETH_CARD_TEXT(card, 2, "ckirberr");
QETH_CARD_TEXT(card, 2, " rc???");
}
@@ -1114,9 +1114,9 @@ static void qeth_irq(struct ccw_device *cdev, unsigned long intparm,
dev_warn(&channel->ccwdev->dev,
"The qeth device driver failed to recover "
"an error on the device\n");
- QETH_DBF_MESSAGE(2, "%s sense data available. cstat "
- "0x%X dstat 0x%X\n",
- dev_name(&channel->ccwdev->dev), cstat, dstat);
+ QETH_DBF_MESSAGE(2, "sense data available on channel %x: cstat %#X dstat %#X\n",
+ CCW_DEVID(channel->ccwdev), cstat,
+ dstat);
print_hex_dump(KERN_WARNING, "qeth: irb ",
DUMP_PREFIX_OFFSET, 16, 1, irb, 32, 1);
print_hex_dump(KERN_WARNING, "qeth: sense data ",
@@ -1890,8 +1890,8 @@ static int qeth_idx_activate_channel(struct qeth_card *card,
if (channel->state != CH_STATE_ACTIVATING) {
dev_warn(&channel->ccwdev->dev, "The qeth device driver"
" failed to recover an error on the device\n");
- QETH_DBF_MESSAGE(2, "%s IDX activate timed out\n",
- dev_name(&channel->ccwdev->dev));
+ QETH_DBF_MESSAGE(2, "IDX activate timed out on channel %x\n",
+ CCW_DEVID(channel->ccwdev));
QETH_DBF_TEXT_(SETUP, 2, "2err%d", -ETIME);
return -ETIME;
}
@@ -1926,17 +1926,15 @@ static void qeth_idx_write_cb(struct qeth_card *card,
"The adapter is used exclusively by another "
"host\n");
else
- QETH_DBF_MESSAGE(2, "%s IDX_ACTIVATE on write channel:"
- " negative reply\n",
- dev_name(&channel->ccwdev->dev));
+ QETH_DBF_MESSAGE(2, "IDX_ACTIVATE on channel %x: negative reply\n",
+ CCW_DEVID(channel->ccwdev));
goto out;
}
memcpy(&temp, QETH_IDX_ACT_FUNC_LEVEL(iob->data), 2);
if ((temp & ~0x0100) != qeth_peer_func_level(card->info.func_level)) {
- QETH_DBF_MESSAGE(2, "%s IDX_ACTIVATE on write channel: "
- "function level mismatch (sent: 0x%x, received: "
- "0x%x)\n", dev_name(&channel->ccwdev->dev),
- card->info.func_level, temp);
+ QETH_DBF_MESSAGE(2, "IDX_ACTIVATE on channel %x: function level mismatch (sent: %#x, received: %#x)\n",
+ CCW_DEVID(channel->ccwdev),
+ card->info.func_level, temp);
goto out;
}
channel->state = CH_STATE_UP;
@@ -1973,9 +1971,8 @@ static void qeth_idx_read_cb(struct qeth_card *card,
"insufficient authorization\n");
break;
default:
- QETH_DBF_MESSAGE(2, "%s IDX_ACTIVATE on read channel:"
- " negative reply\n",
- dev_name(&channel->ccwdev->dev));
+ QETH_DBF_MESSAGE(2, "IDX_ACTIVATE on channel %x: negative reply\n",
+ CCW_DEVID(channel->ccwdev));
}
QETH_CARD_TEXT_(card, 2, "idxread%c",
QETH_IDX_ACT_CAUSE_CODE(iob->data));
@@ -1984,10 +1981,9 @@ static void qeth_idx_read_cb(struct qeth_card *card,
memcpy(&temp, QETH_IDX_ACT_FUNC_LEVEL(iob->data), 2);
if (temp != qeth_peer_func_level(card->info.func_level)) {
- QETH_DBF_MESSAGE(2, "%s IDX_ACTIVATE on read channel: function "
- "level mismatch (sent: 0x%x, received: 0x%x)\n",
- dev_name(&channel->ccwdev->dev),
- card->info.func_level, temp);
+ QETH_DBF_MESSAGE(2, "IDX_ACTIVATE on channel %x: function level mismatch (sent: %#x, received: %#x)\n",
+ CCW_DEVID(channel->ccwdev),
+ card->info.func_level, temp);
goto out;
}
memcpy(&card->token.issuer_rm_r,
@@ -2096,9 +2092,8 @@ int qeth_send_control_data(struct qeth_card *card, int len,
(addr_t) iob, 0, 0, event_timeout);
spin_unlock_irq(get_ccwdev_lock(channel->ccwdev));
if (rc) {
- QETH_DBF_MESSAGE(2, "%s qeth_send_control_data: "
- "ccw_device_start rc = %i\n",
- dev_name(&channel->ccwdev->dev), rc);
+ QETH_DBF_MESSAGE(2, "qeth_send_control_data on device %x: ccw_device_start rc = %i\n",
+ CARD_DEVID(card), rc);
QETH_CARD_TEXT_(card, 2, " err%d", rc);
spin_lock_irq(&card->lock);
list_del_init(&reply->list);
@@ -2853,8 +2848,8 @@ struct qeth_cmd_buffer *qeth_get_ipacmd_buffer(struct qeth_card *card,
} else {
dev_warn(&card->gdev->dev,
"The qeth driver ran out of channel command buffers\n");
- QETH_DBF_MESSAGE(1, "%s The qeth driver ran out of channel command buffers",
- dev_name(&card->gdev->dev));
+ QETH_DBF_MESSAGE(1, "device %x ran out of channel command buffers",
+ CARD_DEVID(card));
}
return iob;
@@ -2989,10 +2984,9 @@ static int qeth_query_ipassists_cb(struct qeth_card *card,
return 0;
default:
if (cmd->hdr.return_code) {
- QETH_DBF_MESSAGE(1, "%s IPA_CMD_QIPASSIST: Unhandled "
- "rc=%d\n",
- dev_name(&card->gdev->dev),
- cmd->hdr.return_code);
+ QETH_DBF_MESSAGE(1, "IPA_CMD_QIPASSIST on device %x: Unhandled rc=%#x\n",
+ CARD_DEVID(card),
+ cmd->hdr.return_code);
return 0;
}
}
@@ -3004,8 +2998,8 @@ static int qeth_query_ipassists_cb(struct qeth_card *card,
card->options.ipa6.supported_funcs = cmd->hdr.ipa_supported;
card->options.ipa6.enabled_funcs = cmd->hdr.ipa_enabled;
} else
- QETH_DBF_MESSAGE(1, "%s IPA_CMD_QIPASSIST: Flawed LIC detected"
- "\n", dev_name(&card->gdev->dev));
+ QETH_DBF_MESSAGE(1, "IPA_CMD_QIPASSIST on device %x: Flawed LIC detected\n",
+ CARD_DEVID(card));
return 0;
}
@@ -4297,10 +4291,9 @@ static int qeth_setadpparms_set_access_ctrl_cb(struct qeth_card *card,
cmd->data.setadapterparms.hdr.return_code);
if (cmd->data.setadapterparms.hdr.return_code !=
SET_ACCESS_CTRL_RC_SUCCESS)
- QETH_DBF_MESSAGE(3, "ERR:SET_ACCESS_CTRL(%s,%d)==%d\n",
- card->gdev->dev.kobj.name,
- access_ctrl_req->subcmd_code,
- cmd->data.setadapterparms.hdr.return_code);
+ QETH_DBF_MESSAGE(3, "ERR:SET_ACCESS_CTRL(%#x) on device %x: %#x\n",
+ access_ctrl_req->subcmd_code, CARD_DEVID(card),
+ cmd->data.setadapterparms.hdr.return_code);
switch (cmd->data.setadapterparms.hdr.return_code) {
case SET_ACCESS_CTRL_RC_SUCCESS:
if (card->options.isolation == ISOLATION_MODE_NONE) {
@@ -4312,14 +4305,14 @@ static int qeth_setadpparms_set_access_ctrl_cb(struct qeth_card *card,
}
break;
case SET_ACCESS_CTRL_RC_ALREADY_NOT_ISOLATED:
- QETH_DBF_MESSAGE(2, "%s QDIO data connection isolation already "
- "deactivated\n", dev_name(&card->gdev->dev));
+ QETH_DBF_MESSAGE(2, "QDIO data connection isolation on device %x already deactivated\n",
+ CARD_DEVID(card));
if (fallback)
card->options.isolation = card->options.prev_isolation;
break;
case SET_ACCESS_CTRL_RC_ALREADY_ISOLATED:
- QETH_DBF_MESSAGE(2, "%s QDIO data connection isolation already"
- " activated\n", dev_name(&card->gdev->dev));
+ QETH_DBF_MESSAGE(2, "QDIO data connection isolation on device %x already activated\n",
+ CARD_DEVID(card));
if (fallback)
card->options.isolation = card->options.prev_isolation;
break;
@@ -4405,10 +4398,8 @@ int qeth_set_access_ctrl_online(struct qeth_card *card, int fallback)
rc = qeth_setadpparms_set_access_ctrl(card,
card->options.isolation, fallback);
if (rc) {
- QETH_DBF_MESSAGE(3,
- "IPA(SET_ACCESS_CTRL,%s,%d) sent failed\n",
- card->gdev->dev.kobj.name,
- rc);
+ QETH_DBF_MESSAGE(3, "IPA(SET_ACCESS_CTRL(%d) on device %x: sent failed\n",
+ rc, CARD_DEVID(card));
rc = -EOPNOTSUPP;
}
} else if (card->options.isolation != ISOLATION_MODE_NONE) {
@@ -4443,7 +4434,8 @@ static int qeth_mdio_read(struct net_device *dev, int phy_id, int regnum)
rc = BMCR_FULLDPLX;
if ((card->info.link_type != QETH_LINK_TYPE_GBIT_ETH) &&
(card->info.link_type != QETH_LINK_TYPE_OSN) &&
- (card->info.link_type != QETH_LINK_TYPE_10GBIT_ETH))
+ (card->info.link_type != QETH_LINK_TYPE_10GBIT_ETH) &&
+ (card->info.link_type != QETH_LINK_TYPE_25GBIT_ETH))
rc |= BMCR_SPEED100;
break;
case MII_BMSR: /* Basic mode status register */
@@ -4634,8 +4626,8 @@ static int qeth_snmp_command(struct qeth_card *card, char __user *udata)
rc = qeth_send_ipa_snmp_cmd(card, iob, QETH_SETADP_BASE_LEN + req_len,
qeth_snmp_command_cb, (void *)&qinfo);
if (rc)
- QETH_DBF_MESSAGE(2, "SNMP command failed on %s: (0x%x)\n",
- QETH_CARD_IFNAME(card), rc);
+ QETH_DBF_MESSAGE(2, "SNMP command failed on device %x: (%#x)\n",
+ CARD_DEVID(card), rc);
else {
if (copy_to_user(udata, qinfo.udata, qinfo.udata_len))
rc = -EFAULT;
@@ -4869,8 +4861,8 @@ static void qeth_determine_capabilities(struct qeth_card *card)
rc = qeth_read_conf_data(card, (void **) &prcd, &length);
if (rc) {
- QETH_DBF_MESSAGE(2, "%s qeth_read_conf_data returned %i\n",
- dev_name(&card->gdev->dev), rc);
+ QETH_DBF_MESSAGE(2, "qeth_read_conf_data on device %x returned %i\n",
+ CARD_DEVID(card), rc);
QETH_DBF_TEXT_(SETUP, 2, "5err%d", rc);
goto out_offline;
}
@@ -5086,7 +5078,7 @@ static struct ccw_driver qeth_ccw_driver = {
.remove = ccwgroup_remove_ccwdev,
};
-int qeth_core_hardsetup_card(struct qeth_card *card)
+int qeth_core_hardsetup_card(struct qeth_card *card, bool *carrier_ok)
{
int retries = 3;
int rc;
@@ -5096,8 +5088,8 @@ int qeth_core_hardsetup_card(struct qeth_card *card)
qeth_update_from_chp_desc(card);
retry:
if (retries < 3)
- QETH_DBF_MESSAGE(2, "%s Retrying to do IDX activates.\n",
- dev_name(&card->gdev->dev));
+ QETH_DBF_MESSAGE(2, "Retrying to do IDX activates on device %x.\n",
+ CARD_DEVID(card));
rc = qeth_qdio_clear_card(card, card->info.type != QETH_CARD_TYPE_IQD);
ccw_device_set_offline(CARD_DDEV(card));
ccw_device_set_offline(CARD_WDEV(card));
@@ -5161,13 +5153,20 @@ int qeth_core_hardsetup_card(struct qeth_card *card)
if (rc == IPA_RC_LAN_OFFLINE) {
dev_warn(&card->gdev->dev,
"The LAN is offline\n");
- netif_carrier_off(card->dev);
+ *carrier_ok = false;
} else {
rc = -ENODEV;
goto out;
}
} else {
- netif_carrier_on(card->dev);
+ *carrier_ok = true;
+ }
+
+ if (qeth_netdev_is_registered(card->dev)) {
+ if (*carrier_ok)
+ netif_carrier_on(card->dev);
+ else
+ netif_carrier_off(card->dev);
}
card->options.ipa4.supported_funcs = 0;
@@ -5201,8 +5200,8 @@ int qeth_core_hardsetup_card(struct qeth_card *card)
out:
dev_warn(&card->gdev->dev, "The qeth device driver failed to recover "
"an error on the device\n");
- QETH_DBF_MESSAGE(2, "%s Initialization in hardsetup failed! rc=%d\n",
- dev_name(&card->gdev->dev), rc);
+ QETH_DBF_MESSAGE(2, "Initialization for device %x failed in hardsetup! rc=%d\n",
+ CARD_DEVID(card), rc);
return rc;
}
EXPORT_SYMBOL_GPL(qeth_core_hardsetup_card);
@@ -5481,11 +5480,12 @@ struct qeth_cmd_buffer *qeth_get_setassparms_cmd(struct qeth_card *card,
}
EXPORT_SYMBOL_GPL(qeth_get_setassparms_cmd);
-int qeth_send_setassparms(struct qeth_card *card,
- struct qeth_cmd_buffer *iob, __u16 len, long data,
- int (*reply_cb)(struct qeth_card *,
- struct qeth_reply *, unsigned long),
- void *reply_param)
+static int qeth_send_setassparms(struct qeth_card *card,
+ struct qeth_cmd_buffer *iob, u16 len,
+ long data, int (*reply_cb)(struct qeth_card *,
+ struct qeth_reply *,
+ unsigned long),
+ void *reply_param)
{
int rc;
struct qeth_ipa_cmd *cmd;
@@ -5501,7 +5501,6 @@ int qeth_send_setassparms(struct qeth_card *card,
rc = qeth_send_ipa_cmd(card, iob, reply_cb, reply_param);
return rc;
}
-EXPORT_SYMBOL_GPL(qeth_send_setassparms);
int qeth_send_simple_setassparms_prot(struct qeth_card *card,
enum qeth_ipa_funcs ipa_func,
@@ -6170,8 +6169,14 @@ static void qeth_set_cmd_adv_sup(struct ethtool_link_ksettings *cmd,
WARN_ON_ONCE(1);
}
- /* fallthrough from high to low, to select all legal speeds: */
+ /* partially does fall through, to also select lower speeds */
switch (maxspeed) {
+ case SPEED_25000:
+ ethtool_link_ksettings_add_link_mode(cmd, supported,
+ 25000baseSR_Full);
+ ethtool_link_ksettings_add_link_mode(cmd, advertising,
+ 25000baseSR_Full);
+ break;
case SPEED_10000:
ethtool_link_ksettings_add_link_mode(cmd, supported,
10000baseT_Full);
@@ -6254,6 +6259,10 @@ int qeth_core_ethtool_get_link_ksettings(struct net_device *netdev,
cmd->base.speed = SPEED_10000;
cmd->base.port = PORT_FIBRE;
break;
+ case QETH_LINK_TYPE_25GBIT_ETH:
+ cmd->base.speed = SPEED_25000;
+ cmd->base.port = PORT_FIBRE;
+ break;
default:
cmd->base.speed = SPEED_10;
cmd->base.port = PORT_TP;
@@ -6320,6 +6329,9 @@ int qeth_core_ethtool_get_link_ksettings(struct net_device *netdev,
case CARD_INFO_PORTS_10G:
cmd->base.speed = SPEED_10000;
break;
+ case CARD_INFO_PORTS_25G:
+ cmd->base.speed = SPEED_25000;
+ break;
}
return 0;
diff --git a/drivers/s390/net/qeth_core_mpc.h b/drivers/s390/net/qeth_core_mpc.h
index e850904..3e54be2 100644
--- a/drivers/s390/net/qeth_core_mpc.h
+++ b/drivers/s390/net/qeth_core_mpc.h
@@ -90,6 +90,7 @@ enum qeth_link_types {
QETH_LINK_TYPE_GBIT_ETH = 0x03,
QETH_LINK_TYPE_OSN = 0x04,
QETH_LINK_TYPE_10GBIT_ETH = 0x10,
+ QETH_LINK_TYPE_25GBIT_ETH = 0x12,
QETH_LINK_TYPE_LANE_ETH100 = 0x81,
QETH_LINK_TYPE_LANE_TR = 0x82,
QETH_LINK_TYPE_LANE_ETH1000 = 0x83,
@@ -347,6 +348,7 @@ enum qeth_card_info_port_speed {
CARD_INFO_PORTS_100M = 0x00000006,
CARD_INFO_PORTS_1G = 0x00000007,
CARD_INFO_PORTS_10G = 0x00000008,
+ CARD_INFO_PORTS_25G = 0x0000000A,
};
/* (SET)DELIP(M) IPA stuff ***************************************************/
@@ -436,7 +438,7 @@ struct qeth_ipacmd_setassparms {
__u32 flags_32bit;
struct qeth_ipa_caps caps;
struct qeth_checksum_cmd chksum;
- struct qeth_arp_cache_entry add_arp_entry;
+ struct qeth_arp_cache_entry arp_entry;
struct qeth_arp_query_data query_arp;
struct qeth_tso_start_data tso;
__u8 ip[16];
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 23aaf37..2914a1a 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -146,11 +146,11 @@ static int qeth_l2_write_mac(struct qeth_card *card, u8 *mac)
QETH_CARD_TEXT(card, 2, "L2Wmac");
rc = qeth_l2_send_setdelmac(card, mac, cmd);
if (rc == -EEXIST)
- QETH_DBF_MESSAGE(2, "MAC %pM already registered on %s\n",
- mac, QETH_CARD_IFNAME(card));
+ QETH_DBF_MESSAGE(2, "MAC already registered on device %x\n",
+ CARD_DEVID(card));
else if (rc)
- QETH_DBF_MESSAGE(2, "Failed to register MAC %pM on %s: %d\n",
- mac, QETH_CARD_IFNAME(card), rc);
+ QETH_DBF_MESSAGE(2, "Failed to register MAC on device %x: %d\n",
+ CARD_DEVID(card), rc);
return rc;
}
@@ -163,8 +163,8 @@ static int qeth_l2_remove_mac(struct qeth_card *card, u8 *mac)
QETH_CARD_TEXT(card, 2, "L2Rmac");
rc = qeth_l2_send_setdelmac(card, mac, cmd);
if (rc)
- QETH_DBF_MESSAGE(2, "Failed to delete MAC %pM on %s: %d\n",
- mac, QETH_CARD_IFNAME(card), rc);
+ QETH_DBF_MESSAGE(2, "Failed to delete MAC on device %u: %d\n",
+ CARD_DEVID(card), rc);
return rc;
}
@@ -260,9 +260,9 @@ static int qeth_l2_send_setdelvlan_cb(struct qeth_card *card,
QETH_CARD_TEXT(card, 2, "L2sdvcb");
if (cmd->hdr.return_code) {
- QETH_DBF_MESSAGE(2, "Error in processing VLAN %i on %s: 0x%x.\n",
+ QETH_DBF_MESSAGE(2, "Error in processing VLAN %u on device %x: %#x.\n",
cmd->data.setdelvlan.vlan_id,
- QETH_CARD_IFNAME(card), cmd->hdr.return_code);
+ CARD_DEVID(card), cmd->hdr.return_code);
QETH_CARD_TEXT_(card, 2, "L2VL%4x", cmd->hdr.command);
QETH_CARD_TEXT_(card, 2, "err%d", cmd->hdr.return_code);
}
@@ -455,8 +455,8 @@ static int qeth_l2_request_initial_mac(struct qeth_card *card)
rc = qeth_vm_request_mac(card);
if (!rc)
goto out;
- QETH_DBF_MESSAGE(2, "z/VM MAC Service failed on device %s: x%x\n",
- CARD_BUS_ID(card), rc);
+ QETH_DBF_MESSAGE(2, "z/VM MAC Service failed on device %x: %#x\n",
+ CARD_DEVID(card), rc);
QETH_DBF_TEXT_(SETUP, 2, "err%04x", rc);
/* fall back to alternative mechanism: */
}
@@ -468,8 +468,8 @@ static int qeth_l2_request_initial_mac(struct qeth_card *card)
rc = qeth_setadpparms_change_macaddr(card);
if (!rc)
goto out;
- QETH_DBF_MESSAGE(2, "READ_MAC Assist failed on device %s: x%x\n",
- CARD_BUS_ID(card), rc);
+ QETH_DBF_MESSAGE(2, "READ_MAC Assist failed on device %x: %#x\n",
+ CARD_DEVID(card), rc);
QETH_DBF_TEXT_(SETUP, 2, "1err%04x", rc);
/* fall back once more: */
}
@@ -826,7 +826,8 @@ static void qeth_l2_remove_device(struct ccwgroup_device *cgdev)
if (cgdev->state == CCWGROUP_ONLINE)
qeth_l2_set_offline(cgdev);
- unregister_netdev(card->dev);
+ if (qeth_netdev_is_registered(card->dev))
+ unregister_netdev(card->dev);
}
static const struct ethtool_ops qeth_l2_ethtool_ops = {
@@ -862,11 +863,11 @@ static const struct net_device_ops qeth_l2_netdev_ops = {
.ndo_set_features = qeth_set_features
};
-static int qeth_l2_setup_netdev(struct qeth_card *card)
+static int qeth_l2_setup_netdev(struct qeth_card *card, bool carrier_ok)
{
int rc;
- if (card->dev->netdev_ops)
+ if (qeth_netdev_is_registered(card->dev))
return 0;
card->dev->priv_flags |= IFF_UNICAST_FLT;
@@ -919,6 +920,9 @@ static int qeth_l2_setup_netdev(struct qeth_card *card)
qeth_l2_request_initial_mac(card);
netif_napi_add(card->dev, &card->napi, qeth_poll, QETH_NAPI_WEIGHT);
rc = register_netdev(card->dev);
+ if (!rc && carrier_ok)
+ netif_carrier_on(card->dev);
+
if (rc)
card->dev->netdev_ops = NULL;
return rc;
@@ -949,6 +953,7 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode)
struct qeth_card *card = dev_get_drvdata(&gdev->dev);
int rc = 0;
enum qeth_card_states recover_flag;
+ bool carrier_ok;
mutex_lock(&card->discipline_mutex);
mutex_lock(&card->conf_mutex);
@@ -956,7 +961,7 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode)
QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *));
recover_flag = card->state;
- rc = qeth_core_hardsetup_card(card);
+ rc = qeth_core_hardsetup_card(card, &carrier_ok);
if (rc) {
QETH_DBF_TEXT_(SETUP, 2, "2err%04x", rc);
rc = -ENODEV;
@@ -967,7 +972,7 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode)
dev_info(&card->gdev->dev,
"The device represents a Bridge Capable Port\n");
- rc = qeth_l2_setup_netdev(card);
+ rc = qeth_l2_setup_netdev(card, carrier_ok);
if (rc)
goto out_remove;
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 0b161cc..f08b745 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -278,9 +278,6 @@ static void qeth_l3_clear_ip_htable(struct qeth_card *card, int recover)
QETH_CARD_TEXT(card, 4, "clearip");
- if (recover && card->options.sniffer)
- return;
-
spin_lock_bh(&card->ip_lock);
hash_for_each_safe(card->ip_htable, i, tmp, addr, hnode) {
@@ -494,9 +491,8 @@ int qeth_l3_setrouting_v4(struct qeth_card *card)
QETH_PROT_IPV4);
if (rc) {
card->options.route4.type = NO_ROUTER;
- QETH_DBF_MESSAGE(2, "Error (0x%04x) while setting routing type"
- " on %s. Type set to 'no router'.\n", rc,
- QETH_CARD_IFNAME(card));
+ QETH_DBF_MESSAGE(2, "Error (%#06x) while setting routing type on device %x. Type set to 'no router'.\n",
+ rc, CARD_DEVID(card));
}
return rc;
}
@@ -518,9 +514,8 @@ int qeth_l3_setrouting_v6(struct qeth_card *card)
QETH_PROT_IPV6);
if (rc) {
card->options.route6.type = NO_ROUTER;
- QETH_DBF_MESSAGE(2, "Error (0x%04x) while setting routing type"
- " on %s. Type set to 'no router'.\n", rc,
- QETH_CARD_IFNAME(card));
+ QETH_DBF_MESSAGE(2, "Error (%#06x) while setting routing type on device %x. Type set to 'no router'.\n",
+ rc, CARD_DEVID(card));
}
return rc;
}
@@ -663,6 +658,8 @@ static int qeth_l3_register_addr_entry(struct qeth_card *card,
int rc = 0;
int cnt = 3;
+ if (card->options.sniffer)
+ return 0;
if (addr->proto == QETH_PROT_IPV4) {
QETH_CARD_TEXT(card, 2, "setaddr4");
@@ -697,6 +694,9 @@ static int qeth_l3_deregister_addr_entry(struct qeth_card *card,
{
int rc = 0;
+ if (card->options.sniffer)
+ return 0;
+
if (addr->proto == QETH_PROT_IPV4) {
QETH_CARD_TEXT(card, 2, "deladdr4");
QETH_CARD_HEX(card, 3, &addr->u.a4.addr, sizeof(int));
@@ -1070,8 +1070,8 @@ qeth_diags_trace_cb(struct qeth_card *card, struct qeth_reply *reply,
}
break;
default:
- QETH_DBF_MESSAGE(2, "Unknown sniffer action (0x%04x) on %s\n",
- cmd->data.diagass.action, QETH_CARD_IFNAME(card));
+ QETH_DBF_MESSAGE(2, "Unknown sniffer action (%#06x) on device %x\n",
+ cmd->data.diagass.action, CARD_DEVID(card));
}
return 0;
@@ -1517,32 +1517,25 @@ static void qeth_l3_set_rx_mode(struct net_device *dev)
qeth_l3_handle_promisc_mode(card);
}
-static const char *qeth_l3_arp_get_error_cause(int *rc)
+static int qeth_l3_arp_makerc(int rc)
{
- switch (*rc) {
- case QETH_IPA_ARP_RC_FAILED:
- *rc = -EIO;
- return "operation failed";
+ switch (rc) {
+ case IPA_RC_SUCCESS:
+ return 0;
case QETH_IPA_ARP_RC_NOTSUPP:
- *rc = -EOPNOTSUPP;
- return "operation not supported";
- case QETH_IPA_ARP_RC_OUT_OF_RANGE:
- *rc = -EINVAL;
- return "argument out of range";
case QETH_IPA_ARP_RC_Q_NOTSUPP:
- *rc = -EOPNOTSUPP;
- return "query operation not supported";
+ return -EOPNOTSUPP;
+ case QETH_IPA_ARP_RC_OUT_OF_RANGE:
+ return -EINVAL;
case QETH_IPA_ARP_RC_Q_NO_DATA:
- *rc = -ENOENT;
- return "no query data available";
+ return -ENOENT;
default:
- return "unknown error";
+ return -EIO;
}
}
static int qeth_l3_arp_set_no_entries(struct qeth_card *card, int no_entries)
{
- int tmp;
int rc;
QETH_CARD_TEXT(card, 3, "arpstnoe");
@@ -1560,13 +1553,10 @@ static int qeth_l3_arp_set_no_entries(struct qeth_card *card, int no_entries)
rc = qeth_send_simple_setassparms(card, IPA_ARP_PROCESSING,
IPA_CMD_ASS_ARP_SET_NO_ENTRIES,
no_entries);
- if (rc) {
- tmp = rc;
- QETH_DBF_MESSAGE(2, "Could not set number of ARP entries on "
- "%s: %s (0x%x/%d)\n", QETH_CARD_IFNAME(card),
- qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
- }
- return rc;
+ if (rc)
+ QETH_DBF_MESSAGE(2, "Could not set number of ARP entries on device %x: %#x\n",
+ CARD_DEVID(card), rc);
+ return qeth_l3_arp_makerc(rc);
}
static __u32 get_arp_entry_size(struct qeth_card *card,
@@ -1716,7 +1706,6 @@ static int qeth_l3_query_arp_cache_info(struct qeth_card *card,
{
struct qeth_cmd_buffer *iob;
struct qeth_ipa_cmd *cmd;
- int tmp;
int rc;
QETH_CARD_TEXT_(card, 3, "qarpipv%i", prot);
@@ -1735,15 +1724,10 @@ static int qeth_l3_query_arp_cache_info(struct qeth_card *card,
rc = qeth_l3_send_ipa_arp_cmd(card, iob,
QETH_SETASS_BASE_LEN+QETH_ARP_CMD_LEN,
qeth_l3_arp_query_cb, (void *)qinfo);
- if (rc) {
- tmp = rc;
- QETH_DBF_MESSAGE(2,
- "Error while querying ARP cache on %s: %s "
- "(0x%x/%d)\n", QETH_CARD_IFNAME(card),
- qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
- }
-
- return rc;
+ if (rc)
+ QETH_DBF_MESSAGE(2, "Error while querying ARP cache on device %x: %#x\n",
+ CARD_DEVID(card), rc);
+ return qeth_l3_arp_makerc(rc);
}
static int qeth_l3_arp_query(struct qeth_card *card, char __user *udata)
@@ -1793,15 +1777,18 @@ static int qeth_l3_arp_query(struct qeth_card *card, char __user *udata)
return rc;
}
-static int qeth_l3_arp_add_entry(struct qeth_card *card,
- struct qeth_arp_cache_entry *entry)
+static int qeth_l3_arp_modify_entry(struct qeth_card *card,
+ struct qeth_arp_cache_entry *entry,
+ enum qeth_arp_process_subcmds arp_cmd)
{
+ struct qeth_arp_cache_entry *cmd_entry;
struct qeth_cmd_buffer *iob;
- char buf[16];
- int tmp;
int rc;
- QETH_CARD_TEXT(card, 3, "arpadent");
+ if (arp_cmd == IPA_CMD_ASS_ARP_ADD_ENTRY)
+ QETH_CARD_TEXT(card, 3, "arpadd");
+ else
+ QETH_CARD_TEXT(card, 3, "arpdel");
/*
* currently GuestLAN only supports the ARP assist function
@@ -1814,71 +1801,25 @@ static int qeth_l3_arp_add_entry(struct qeth_card *card,
return -EOPNOTSUPP;
}
- iob = qeth_get_setassparms_cmd(card, IPA_ARP_PROCESSING,
- IPA_CMD_ASS_ARP_ADD_ENTRY,
- sizeof(struct qeth_arp_cache_entry),
- QETH_PROT_IPV4);
+ iob = qeth_get_setassparms_cmd(card, IPA_ARP_PROCESSING, arp_cmd,
+ sizeof(*cmd_entry), QETH_PROT_IPV4);
if (!iob)
return -ENOMEM;
- rc = qeth_send_setassparms(card, iob,
- sizeof(struct qeth_arp_cache_entry),
- (unsigned long) entry,
- qeth_setassparms_cb, NULL);
- if (rc) {
- tmp = rc;
- qeth_l3_ipaddr4_to_string((u8 *)entry->ipaddr, buf);
- QETH_DBF_MESSAGE(2, "Could not add ARP entry for address %s "
- "on %s: %s (0x%x/%d)\n", buf, QETH_CARD_IFNAME(card),
- qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
- }
- return rc;
-}
-static int qeth_l3_arp_remove_entry(struct qeth_card *card,
- struct qeth_arp_cache_entry *entry)
-{
- struct qeth_cmd_buffer *iob;
- char buf[16] = {0, };
- int tmp;
- int rc;
+ cmd_entry = &__ipa_cmd(iob)->data.setassparms.data.arp_entry;
+ ether_addr_copy(cmd_entry->macaddr, entry->macaddr);
+ memcpy(cmd_entry->ipaddr, entry->ipaddr, 4);
+ rc = qeth_send_ipa_cmd(card, iob, qeth_setassparms_cb, NULL);
+ if (rc)
+ QETH_DBF_MESSAGE(2, "Could not modify (cmd: %#x) ARP entry on device %x: %#x\n",
+ arp_cmd, CARD_DEVID(card), rc);
- QETH_CARD_TEXT(card, 3, "arprment");
-
- /*
- * currently GuestLAN only supports the ARP assist function
- * IPA_CMD_ASS_ARP_QUERY_INFO, but not IPA_CMD_ASS_ARP_REMOVE_ENTRY;
- * thus we say EOPNOTSUPP for this ARP function
- */
- if (card->info.guestlan)
- return -EOPNOTSUPP;
- if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) {
- return -EOPNOTSUPP;
- }
- memcpy(buf, entry, 12);
- iob = qeth_get_setassparms_cmd(card, IPA_ARP_PROCESSING,
- IPA_CMD_ASS_ARP_REMOVE_ENTRY,
- 12,
- QETH_PROT_IPV4);
- if (!iob)
- return -ENOMEM;
- rc = qeth_send_setassparms(card, iob,
- 12, (unsigned long)buf,
- qeth_setassparms_cb, NULL);
- if (rc) {
- tmp = rc;
- memset(buf, 0, 16);
- qeth_l3_ipaddr4_to_string((u8 *)entry->ipaddr, buf);
- QETH_DBF_MESSAGE(2, "Could not delete ARP entry for address %s"
- " on %s: %s (0x%x/%d)\n", buf, QETH_CARD_IFNAME(card),
- qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
- }
- return rc;
+ return qeth_l3_arp_makerc(rc);
}
static int qeth_l3_arp_flush_cache(struct qeth_card *card)
{
int rc;
- int tmp;
QETH_CARD_TEXT(card, 3, "arpflush");
@@ -1894,19 +1835,17 @@ static int qeth_l3_arp_flush_cache(struct qeth_card *card)
}
rc = qeth_send_simple_setassparms(card, IPA_ARP_PROCESSING,
IPA_CMD_ASS_ARP_FLUSH_CACHE, 0);
- if (rc) {
- tmp = rc;
- QETH_DBF_MESSAGE(2, "Could not flush ARP cache on %s: %s "
- "(0x%x/%d)\n", QETH_CARD_IFNAME(card),
- qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
- }
- return rc;
+ if (rc)
+ QETH_DBF_MESSAGE(2, "Could not flush ARP cache on device %x: %#x\n",
+ CARD_DEVID(card), rc);
+ return qeth_l3_arp_makerc(rc);
}
static int qeth_l3_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct qeth_card *card = dev->ml_priv;
struct qeth_arp_cache_entry arp_entry;
+ enum qeth_arp_process_subcmds arp_cmd;
int rc = 0;
switch (cmd) {
@@ -1925,27 +1864,16 @@ static int qeth_l3_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
rc = qeth_l3_arp_query(card, rq->ifr_ifru.ifru_data);
break;
case SIOC_QETH_ARP_ADD_ENTRY:
- if (!capable(CAP_NET_ADMIN)) {
- rc = -EPERM;
- break;
- }
- if (copy_from_user(&arp_entry, rq->ifr_ifru.ifru_data,
- sizeof(struct qeth_arp_cache_entry)))
- rc = -EFAULT;
- else
- rc = qeth_l3_arp_add_entry(card, &arp_entry);
- break;
case SIOC_QETH_ARP_REMOVE_ENTRY:
- if (!capable(CAP_NET_ADMIN)) {
- rc = -EPERM;
- break;
- }
- if (copy_from_user(&arp_entry, rq->ifr_ifru.ifru_data,
- sizeof(struct qeth_arp_cache_entry)))
- rc = -EFAULT;
- else
- rc = qeth_l3_arp_remove_entry(card, &arp_entry);
- break;
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (copy_from_user(&arp_entry, rq->ifr_data, sizeof(arp_entry)))
+ return -EFAULT;
+
+ arp_cmd = (cmd == SIOC_QETH_ARP_ADD_ENTRY) ?
+ IPA_CMD_ASS_ARP_ADD_ENTRY :
+ IPA_CMD_ASS_ARP_REMOVE_ENTRY;
+ return qeth_l3_arp_modify_entry(card, &arp_entry, arp_cmd);
case SIOC_QETH_ARP_FLUSH_CACHE:
if (!capable(CAP_NET_ADMIN)) {
rc = -EPERM;
@@ -2383,12 +2311,12 @@ static const struct net_device_ops qeth_l3_osa_netdev_ops = {
.ndo_neigh_setup = qeth_l3_neigh_setup,
};
-static int qeth_l3_setup_netdev(struct qeth_card *card)
+static int qeth_l3_setup_netdev(struct qeth_card *card, bool carrier_ok)
{
unsigned int headroom;
int rc;
- if (card->dev->netdev_ops)
+ if (qeth_netdev_is_registered(card->dev))
return 0;
if (card->info.type == QETH_CARD_TYPE_OSD ||
@@ -2457,6 +2385,9 @@ static int qeth_l3_setup_netdev(struct qeth_card *card)
netif_napi_add(card->dev, &card->napi, qeth_poll, QETH_NAPI_WEIGHT);
rc = register_netdev(card->dev);
+ if (!rc && carrier_ok)
+ netif_carrier_on(card->dev);
+
out:
if (rc)
card->dev->netdev_ops = NULL;
@@ -2497,7 +2428,8 @@ static void qeth_l3_remove_device(struct ccwgroup_device *cgdev)
if (cgdev->state == CCWGROUP_ONLINE)
qeth_l3_set_offline(cgdev);
- unregister_netdev(card->dev);
+ if (qeth_netdev_is_registered(card->dev))
+ unregister_netdev(card->dev);
qeth_l3_clear_ip_htable(card, 0);
qeth_l3_clear_ipato_list(card);
}
@@ -2507,6 +2439,7 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode)
struct qeth_card *card = dev_get_drvdata(&gdev->dev);
int rc = 0;
enum qeth_card_states recover_flag;
+ bool carrier_ok;
mutex_lock(&card->discipline_mutex);
mutex_lock(&card->conf_mutex);
@@ -2514,14 +2447,14 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode)
QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *));
recover_flag = card->state;
- rc = qeth_core_hardsetup_card(card);
+ rc = qeth_core_hardsetup_card(card, &carrier_ok);
if (rc) {
QETH_DBF_TEXT_(SETUP, 2, "2err%04x", rc);
rc = -ENODEV;
goto out_remove;
}
- rc = qeth_l3_setup_netdev(card);
+ rc = qeth_l3_setup_netdev(card, carrier_ok);
if (rc)
goto out_remove;
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index ff6ba6d..cc56cb3 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1614,10 +1614,10 @@ static void sci_request_dma(struct uart_port *port)
hrtimer_init(&s->rx_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
s->rx_timer.function = rx_timer_fn;
+ s->chan_rx_saved = s->chan_rx = chan;
+
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
sci_submit_rx(s);
-
- s->chan_rx_saved = s->chan_rx = chan;
}
}
@@ -3102,6 +3102,7 @@ static struct uart_driver sci_uart_driver = {
static int sci_remove(struct platform_device *dev)
{
struct sci_port *port = platform_get_drvdata(dev);
+ unsigned int type = port->port.type; /* uart_remove_... clears it */
sci_ports_in_use &= ~BIT(port->port.line);
uart_remove_one_port(&sci_uart_driver, &port->port);
@@ -3112,8 +3113,7 @@ static int sci_remove(struct platform_device *dev)
sysfs_remove_file(&dev->dev.kobj,
&dev_attr_rx_fifo_trigger.attr);
}
- if (port->port.type == PORT_SCIFA || port->port.type == PORT_SCIFB ||
- port->port.type == PORT_HSCIF) {
+ if (type == PORT_SCIFA || type == PORT_SCIFB || type == PORT_HSCIF) {
sysfs_remove_file(&dev->dev.kobj,
&dev_attr_rx_fifo_timeout.attr);
}
diff --git a/drivers/tty/tty_baudrate.c b/drivers/tty/tty_baudrate.c
index 7576cea..f438eaa 100644
--- a/drivers/tty/tty_baudrate.c
+++ b/drivers/tty/tty_baudrate.c
@@ -77,7 +77,7 @@ speed_t tty_termios_baud_rate(struct ktermios *termios)
else
cbaud += 15;
}
- return baud_table[cbaud];
+ return cbaud >= n_baud_table ? 0 : baud_table[cbaud];
}
EXPORT_SYMBOL(tty_termios_baud_rate);
@@ -113,7 +113,7 @@ speed_t tty_termios_input_baud_rate(struct ktermios *termios)
else
cbaud += 15;
}
- return baud_table[cbaud];
+ return cbaud >= n_baud_table ? 0 : baud_table[cbaud];
#else /* IBSHIFT */
return tty_termios_baud_rate(termios);
#endif /* IBSHIFT */
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 55370e6..41ec8e5 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1548,7 +1548,7 @@ static void csi_K(struct vc_data *vc, int vpar)
scr_memsetw(start + offset, vc->vc_video_erase_char, 2 * count);
vc->vc_need_wrap = 0;
if (con_should_update(vc))
- do_update_region(vc, (unsigned long) start, count);
+ do_update_region(vc, (unsigned long)(start + offset), count);
}
static void csi_X(struct vc_data *vc, int vpar) /* erase the following vpar positions */
diff --git a/drivers/usb/typec/ucsi/Kconfig b/drivers/usb/typec/ucsi/Kconfig
index e36d6c7..7811888 100644
--- a/drivers/usb/typec/ucsi/Kconfig
+++ b/drivers/usb/typec/ucsi/Kconfig
@@ -23,6 +23,16 @@
if TYPEC_UCSI
+config UCSI_CCG
+ tristate "UCSI Interface Driver for Cypress CCGx"
+ depends on I2C
+ help
+ This driver enables UCSI support on platforms that expose a
+ Cypress CCGx Type-C controller over I2C interface.
+
+ To compile the driver as a module, choose M here: the module will be
+ called ucsi_ccg.
+
config UCSI_ACPI
tristate "UCSI ACPI Interface Driver"
depends on ACPI
diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile
index 7afbea5..2f4900b 100644
--- a/drivers/usb/typec/ucsi/Makefile
+++ b/drivers/usb/typec/ucsi/Makefile
@@ -8,3 +8,5 @@
typec_ucsi-$(CONFIG_TRACING) += trace.o
obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o
+
+obj-$(CONFIG_UCSI_CCG) += ucsi_ccg.o
diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
new file mode 100644
index 0000000..de8a43b
--- /dev/null
+++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * UCSI driver for Cypress CCGx Type-C controller
+ *
+ * Copyright (C) 2017-2018 NVIDIA Corporation. All rights reserved.
+ * Author: Ajay Gupta <[email protected]>
+ *
+ * Some code borrowed from drivers/usb/typec/ucsi/ucsi_acpi.c
+ */
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+#include <asm/unaligned.h>
+#include "ucsi.h"
+
+struct ucsi_ccg {
+ struct device *dev;
+ struct ucsi *ucsi;
+ struct ucsi_ppm ppm;
+ struct i2c_client *client;
+};
+
+#define CCGX_RAB_INTR_REG 0x06
+#define CCGX_RAB_UCSI_CONTROL 0x39
+#define CCGX_RAB_UCSI_CONTROL_START BIT(0)
+#define CCGX_RAB_UCSI_CONTROL_STOP BIT(1)
+#define CCGX_RAB_UCSI_DATA_BLOCK(offset) (0xf000 | ((offset) & 0xff))
+
+static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len)
+{
+ struct i2c_client *client = uc->client;
+ const struct i2c_adapter_quirks *quirks = client->adapter->quirks;
+ unsigned char buf[2];
+ struct i2c_msg msgs[] = {
+ {
+ .addr = client->addr,
+ .flags = 0x0,
+ .len = sizeof(buf),
+ .buf = buf,
+ },
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .buf = data,
+ },
+ };
+ u32 rlen, rem_len = len, max_read_len = len;
+ int status;
+
+ /* check any max_read_len limitation on i2c adapter */
+ if (quirks && quirks->max_read_len)
+ max_read_len = quirks->max_read_len;
+
+ while (rem_len > 0) {
+ msgs[1].buf = &data[len - rem_len];
+ rlen = min_t(u16, rem_len, max_read_len);
+ msgs[1].len = rlen;
+ put_unaligned_le16(rab, buf);
+ status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (status < 0) {
+ dev_err(uc->dev, "i2c_transfer failed %d\n", status);
+ return status;
+ }
+ rab += rlen;
+ rem_len -= rlen;
+ }
+
+ return 0;
+}
+
+static int ccg_write(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len)
+{
+ struct i2c_client *client = uc->client;
+ unsigned char *buf;
+ struct i2c_msg msgs[] = {
+ {
+ .addr = client->addr,
+ .flags = 0x0,
+ }
+ };
+ int status;
+
+ buf = kzalloc(len + sizeof(rab), GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ put_unaligned_le16(rab, buf);
+ memcpy(buf + sizeof(rab), data, len);
+
+ msgs[0].len = len + sizeof(rab);
+ msgs[0].buf = buf;
+
+ status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (status < 0) {
+ dev_err(uc->dev, "i2c_transfer failed %d\n", status);
+ kfree(buf);
+ return status;
+ }
+
+ kfree(buf);
+ return 0;
+}
+
+static int ucsi_ccg_init(struct ucsi_ccg *uc)
+{
+ unsigned int count = 10;
+ u8 data;
+ int status;
+
+ data = CCGX_RAB_UCSI_CONTROL_STOP;
+ status = ccg_write(uc, CCGX_RAB_UCSI_CONTROL, &data, sizeof(data));
+ if (status < 0)
+ return status;
+
+ data = CCGX_RAB_UCSI_CONTROL_START;
+ status = ccg_write(uc, CCGX_RAB_UCSI_CONTROL, &data, sizeof(data));
+ if (status < 0)
+ return status;
+
+ /*
+ * Flush CCGx RESPONSE queue by acking interrupts. Above ucsi control
+ * register write will push response which must be cleared.
+ */
+ do {
+ status = ccg_read(uc, CCGX_RAB_INTR_REG, &data, sizeof(data));
+ if (status < 0)
+ return status;
+
+ if (!data)
+ return 0;
+
+ status = ccg_write(uc, CCGX_RAB_INTR_REG, &data, sizeof(data));
+ if (status < 0)
+ return status;
+
+ usleep_range(10000, 11000);
+ } while (--count);
+
+ return -ETIMEDOUT;
+}
+
+static int ucsi_ccg_send_data(struct ucsi_ccg *uc)
+{
+ u8 *ppm = (u8 *)uc->ppm.data;
+ int status;
+ u16 rab;
+
+ rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, message_out));
+ status = ccg_write(uc, rab, ppm +
+ offsetof(struct ucsi_data, message_out),
+ sizeof(uc->ppm.data->message_out));
+ if (status < 0)
+ return status;
+
+ rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, ctrl));
+ return ccg_write(uc, rab, ppm + offsetof(struct ucsi_data, ctrl),
+ sizeof(uc->ppm.data->ctrl));
+}
+
+static int ucsi_ccg_recv_data(struct ucsi_ccg *uc)
+{
+ u8 *ppm = (u8 *)uc->ppm.data;
+ int status;
+ u16 rab;
+
+ rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, cci));
+ status = ccg_read(uc, rab, ppm + offsetof(struct ucsi_data, cci),
+ sizeof(uc->ppm.data->cci));
+ if (status < 0)
+ return status;
+
+ rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, message_in));
+ return ccg_read(uc, rab, ppm + offsetof(struct ucsi_data, message_in),
+ sizeof(uc->ppm.data->message_in));
+}
+
+static int ucsi_ccg_ack_interrupt(struct ucsi_ccg *uc)
+{
+ int status;
+ unsigned char data;
+
+ status = ccg_read(uc, CCGX_RAB_INTR_REG, &data, sizeof(data));
+ if (status < 0)
+ return status;
+
+ return ccg_write(uc, CCGX_RAB_INTR_REG, &data, sizeof(data));
+}
+
+static int ucsi_ccg_sync(struct ucsi_ppm *ppm)
+{
+ struct ucsi_ccg *uc = container_of(ppm, struct ucsi_ccg, ppm);
+ int status;
+
+ status = ucsi_ccg_recv_data(uc);
+ if (status < 0)
+ return status;
+
+ /* ack interrupt to allow next command to run */
+ return ucsi_ccg_ack_interrupt(uc);
+}
+
+static int ucsi_ccg_cmd(struct ucsi_ppm *ppm, struct ucsi_control *ctrl)
+{
+ struct ucsi_ccg *uc = container_of(ppm, struct ucsi_ccg, ppm);
+
+ ppm->data->ctrl.raw_cmd = ctrl->raw_cmd;
+ return ucsi_ccg_send_data(uc);
+}
+
+static irqreturn_t ccg_irq_handler(int irq, void *data)
+{
+ struct ucsi_ccg *uc = data;
+
+ ucsi_notify(uc->ucsi);
+
+ return IRQ_HANDLED;
+}
+
+static int ucsi_ccg_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct ucsi_ccg *uc;
+ int status;
+ u16 rab;
+
+ uc = devm_kzalloc(dev, sizeof(*uc), GFP_KERNEL);
+ if (!uc)
+ return -ENOMEM;
+
+ uc->ppm.data = devm_kzalloc(dev, sizeof(struct ucsi_data), GFP_KERNEL);
+ if (!uc->ppm.data)
+ return -ENOMEM;
+
+ uc->ppm.cmd = ucsi_ccg_cmd;
+ uc->ppm.sync = ucsi_ccg_sync;
+ uc->dev = dev;
+ uc->client = client;
+
+ /* reset ccg device and initialize ucsi */
+ status = ucsi_ccg_init(uc);
+ if (status < 0) {
+ dev_err(uc->dev, "ucsi_ccg_init failed - %d\n", status);
+ return status;
+ }
+
+ status = devm_request_threaded_irq(dev, client->irq, NULL,
+ ccg_irq_handler,
+ IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+ dev_name(dev), uc);
+ if (status < 0) {
+ dev_err(uc->dev, "request_threaded_irq failed - %d\n", status);
+ return status;
+ }
+
+ uc->ucsi = ucsi_register_ppm(dev, &uc->ppm);
+ if (IS_ERR(uc->ucsi)) {
+ dev_err(uc->dev, "ucsi_register_ppm failed\n");
+ return PTR_ERR(uc->ucsi);
+ }
+
+ rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, version));
+ status = ccg_read(uc, rab, (u8 *)(uc->ppm.data) +
+ offsetof(struct ucsi_data, version),
+ sizeof(uc->ppm.data->version));
+ if (status < 0) {
+ ucsi_unregister_ppm(uc->ucsi);
+ return status;
+ }
+
+ i2c_set_clientdata(client, uc);
+ return 0;
+}
+
+static int ucsi_ccg_remove(struct i2c_client *client)
+{
+ struct ucsi_ccg *uc = i2c_get_clientdata(client);
+
+ ucsi_unregister_ppm(uc->ucsi);
+
+ return 0;
+}
+
+static const struct i2c_device_id ucsi_ccg_device_id[] = {
+ {"ccgx-ucsi", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ucsi_ccg_device_id);
+
+static struct i2c_driver ucsi_ccg_driver = {
+ .driver = {
+ .name = "ucsi_ccg",
+ },
+ .probe = ucsi_ccg_probe,
+ .remove = ucsi_ccg_remove,
+ .id_table = ucsi_ccg_device_id,
+};
+
+module_i2c_driver(ucsi_ccg_driver);
+
+MODULE_AUTHOR("Ajay Gupta <[email protected]>");
+MODULE_DESCRIPTION("UCSI driver for Cypress CCGx Type-C controller");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c
index f15f89d..7ea6fb6a 100644
--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -914,7 +914,7 @@ int gnttab_dma_free_pages(struct gnttab_dma_alloc_args *args)
ret = xenmem_reservation_increase(args->nr_pages, args->frames);
if (ret != args->nr_pages) {
- pr_debug("Failed to decrease reservation for DMA buffer\n");
+ pr_debug("Failed to increase reservation for DMA buffer\n");
ret = -EFAULT;
} else {
ret = 0;
diff --git a/drivers/xen/privcmd-buf.c b/drivers/xen/privcmd-buf.c
index df1ed37..de01a6d 100644
--- a/drivers/xen/privcmd-buf.c
+++ b/drivers/xen/privcmd-buf.c
@@ -21,15 +21,9 @@
MODULE_LICENSE("GPL");
-static unsigned int limit = 64;
-module_param(limit, uint, 0644);
-MODULE_PARM_DESC(limit, "Maximum number of pages that may be allocated by "
- "the privcmd-buf device per open file");
-
struct privcmd_buf_private {
struct mutex lock;
struct list_head list;
- unsigned int allocated;
};
struct privcmd_buf_vma_private {
@@ -60,13 +54,10 @@ static void privcmd_buf_vmapriv_free(struct privcmd_buf_vma_private *vma_priv)
{
unsigned int i;
- vma_priv->file_priv->allocated -= vma_priv->n_pages;
-
list_del(&vma_priv->list);
for (i = 0; i < vma_priv->n_pages; i++)
- if (vma_priv->pages[i])
- __free_page(vma_priv->pages[i]);
+ __free_page(vma_priv->pages[i]);
kfree(vma_priv);
}
@@ -146,8 +137,7 @@ static int privcmd_buf_mmap(struct file *file, struct vm_area_struct *vma)
unsigned int i;
int ret = 0;
- if (!(vma->vm_flags & VM_SHARED) || count > limit ||
- file_priv->allocated + count > limit)
+ if (!(vma->vm_flags & VM_SHARED))
return -EINVAL;
vma_priv = kzalloc(sizeof(*vma_priv) + count * sizeof(void *),
@@ -155,19 +145,15 @@ static int privcmd_buf_mmap(struct file *file, struct vm_area_struct *vma)
if (!vma_priv)
return -ENOMEM;
- vma_priv->n_pages = count;
- count = 0;
- for (i = 0; i < vma_priv->n_pages; i++) {
+ for (i = 0; i < count; i++) {
vma_priv->pages[i] = alloc_page(GFP_KERNEL | __GFP_ZERO);
if (!vma_priv->pages[i])
break;
- count++;
+ vma_priv->n_pages++;
}
mutex_lock(&file_priv->lock);
- file_priv->allocated += count;
-
vma_priv->file_priv = file_priv;
vma_priv->users = 1;
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 8095352..68f322f 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -3163,6 +3163,9 @@ void btrfs_destroy_inode(struct inode *inode);
int btrfs_drop_inode(struct inode *inode);
int __init btrfs_init_cachep(void);
void __cold btrfs_destroy_cachep(void);
+struct inode *btrfs_iget_path(struct super_block *s, struct btrfs_key *location,
+ struct btrfs_root *root, int *new,
+ struct btrfs_path *path);
struct inode *btrfs_iget(struct super_block *s, struct btrfs_key *location,
struct btrfs_root *root, int *was_new);
struct extent_map *btrfs_get_extent(struct btrfs_inode *inode,
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index b0ab41d..3f0b6d1 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1664,9 +1664,8 @@ static int cleaner_kthread(void *arg)
struct btrfs_root *root = arg;
struct btrfs_fs_info *fs_info = root->fs_info;
int again;
- struct btrfs_trans_handle *trans;
- do {
+ while (1) {
again = 0;
/* Make the cleaner go to sleep early. */
@@ -1715,42 +1714,16 @@ static int cleaner_kthread(void *arg)
*/
btrfs_delete_unused_bgs(fs_info);
sleep:
+ if (kthread_should_park())
+ kthread_parkme();
+ if (kthread_should_stop())
+ return 0;
if (!again) {
set_current_state(TASK_INTERRUPTIBLE);
- if (!kthread_should_stop())
- schedule();
+ schedule();
__set_current_state(TASK_RUNNING);
}
- } while (!kthread_should_stop());
-
- /*
- * Transaction kthread is stopped before us and wakes us up.
- * However we might have started a new transaction and COWed some
- * tree blocks when deleting unused block groups for example. So
- * make sure we commit the transaction we started to have a clean
- * shutdown when evicting the btree inode - if it has dirty pages
- * when we do the final iput() on it, eviction will trigger a
- * writeback for it which will fail with null pointer dereferences
- * since work queues and other resources were already released and
- * destroyed by the time the iput/eviction/writeback is made.
- */
- trans = btrfs_attach_transaction(root);
- if (IS_ERR(trans)) {
- if (PTR_ERR(trans) != -ENOENT)
- btrfs_err(fs_info,
- "cleaner transaction attach returned %ld",
- PTR_ERR(trans));
- } else {
- int ret;
-
- ret = btrfs_commit_transaction(trans);
- if (ret)
- btrfs_err(fs_info,
- "cleaner open transaction commit returned %d",
- ret);
}
-
- return 0;
}
static int transaction_kthread(void *arg)
@@ -3931,6 +3904,13 @@ void close_ctree(struct btrfs_fs_info *fs_info)
int ret;
set_bit(BTRFS_FS_CLOSING_START, &fs_info->flags);
+ /*
+ * We don't want the cleaner to start new transactions, add more delayed
+ * iputs, etc. while we're closing. We can't use kthread_stop() yet
+ * because that frees the task_struct, and the transaction kthread might
+ * still try to wake up the cleaner.
+ */
+ kthread_park(fs_info->cleaner_kthread);
/* wait for the qgroup rescan worker to stop */
btrfs_qgroup_wait_for_completion(fs_info, false);
@@ -3958,9 +3938,8 @@ void close_ctree(struct btrfs_fs_info *fs_info)
if (!sb_rdonly(fs_info->sb)) {
/*
- * If the cleaner thread is stopped and there are
- * block groups queued for removal, the deletion will be
- * skipped when we quit the cleaner thread.
+ * The cleaner kthread is stopped, so do one final pass over
+ * unused block groups.
*/
btrfs_delete_unused_bgs(fs_info);
@@ -4359,13 +4338,23 @@ static int btrfs_destroy_pinned_extent(struct btrfs_fs_info *fs_info,
unpin = pinned_extents;
again:
while (1) {
+ /*
+ * The btrfs_finish_extent_commit() may get the same range as
+ * ours between find_first_extent_bit and clear_extent_dirty.
+ * Hence, hold the unused_bg_unpin_mutex to avoid double unpin
+ * the same extent range.
+ */
+ mutex_lock(&fs_info->unused_bg_unpin_mutex);
ret = find_first_extent_bit(unpin, 0, &start, &end,
EXTENT_DIRTY, NULL);
- if (ret)
+ if (ret) {
+ mutex_unlock(&fs_info->unused_bg_unpin_mutex);
break;
+ }
clear_extent_dirty(unpin, start, end);
btrfs_error_unpin_extent_range(fs_info, start, end);
+ mutex_unlock(&fs_info->unused_bg_unpin_mutex);
cond_resched();
}
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index 4ba0aed..74aa552 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -75,7 +75,8 @@ static struct inode *__lookup_free_space_inode(struct btrfs_root *root,
* sure NOFS is set to keep us from deadlocking.
*/
nofs_flag = memalloc_nofs_save();
- inode = btrfs_iget(fs_info->sb, &location, root, NULL);
+ inode = btrfs_iget_path(fs_info->sb, &location, root, NULL, path);
+ btrfs_release_path(path);
memalloc_nofs_restore(nofs_flag);
if (IS_ERR(inode))
return inode;
@@ -838,6 +839,25 @@ int load_free_space_cache(struct btrfs_fs_info *fs_info,
path->search_commit_root = 1;
path->skip_locking = 1;
+ /*
+ * We must pass a path with search_commit_root set to btrfs_iget in
+ * order to avoid a deadlock when allocating extents for the tree root.
+ *
+ * When we are COWing an extent buffer from the tree root, when looking
+ * for a free extent, at extent-tree.c:find_free_extent(), we can find
+ * block group without its free space cache loaded. When we find one
+ * we must load its space cache which requires reading its free space
+ * cache's inode item from the root tree. If this inode item is located
+ * in the same leaf that we started COWing before, then we end up in
+ * deadlock on the extent buffer (trying to read lock it when we
+ * previously write locked it).
+ *
+ * It's safe to read the inode item using the commit root because
+ * block groups, once loaded, stay in memory forever (until they are
+ * removed) as well as their space caches once loaded. New block groups
+ * once created get their ->cached field set to BTRFS_CACHE_FINISHED so
+ * we will never try to read their inode item while the fs is mounted.
+ */
inode = lookup_free_space_inode(fs_info, block_group, path);
if (IS_ERR(inode)) {
btrfs_free_path(path);
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index d3df5b5..9ea4c6f 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -1531,12 +1531,11 @@ static noinline int run_delalloc_nocow(struct inode *inode,
}
btrfs_release_path(path);
- if (cur_offset <= end && cow_start == (u64)-1) {
+ if (cur_offset <= end && cow_start == (u64)-1)
cow_start = cur_offset;
- cur_offset = end;
- }
if (cow_start != (u64)-1) {
+ cur_offset = end;
ret = cow_file_range(inode, locked_page, cow_start, end, end,
page_started, nr_written, 1, NULL);
if (ret)
@@ -3570,10 +3569,11 @@ static noinline int acls_after_inode_item(struct extent_buffer *leaf,
/*
* read an inode from the btree into the in-memory inode
*/
-static int btrfs_read_locked_inode(struct inode *inode)
+static int btrfs_read_locked_inode(struct inode *inode,
+ struct btrfs_path *in_path)
{
struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
- struct btrfs_path *path;
+ struct btrfs_path *path = in_path;
struct extent_buffer *leaf;
struct btrfs_inode_item *inode_item;
struct btrfs_root *root = BTRFS_I(inode)->root;
@@ -3589,15 +3589,18 @@ static int btrfs_read_locked_inode(struct inode *inode)
if (!ret)
filled = true;
- path = btrfs_alloc_path();
- if (!path)
- return -ENOMEM;
+ if (!path) {
+ path = btrfs_alloc_path();
+ if (!path)
+ return -ENOMEM;
+ }
memcpy(&location, &BTRFS_I(inode)->location, sizeof(location));
ret = btrfs_lookup_inode(NULL, root, path, &location, 0);
if (ret) {
- btrfs_free_path(path);
+ if (path != in_path)
+ btrfs_free_path(path);
return ret;
}
@@ -3722,7 +3725,8 @@ static int btrfs_read_locked_inode(struct inode *inode)
btrfs_ino(BTRFS_I(inode)),
root->root_key.objectid, ret);
}
- btrfs_free_path(path);
+ if (path != in_path)
+ btrfs_free_path(path);
if (!maybe_acls)
cache_no_acl(inode);
@@ -5644,8 +5648,9 @@ static struct inode *btrfs_iget_locked(struct super_block *s,
/* Get an inode object given its location and corresponding root.
* Returns in *is_new if the inode was read from disk
*/
-struct inode *btrfs_iget(struct super_block *s, struct btrfs_key *location,
- struct btrfs_root *root, int *new)
+struct inode *btrfs_iget_path(struct super_block *s, struct btrfs_key *location,
+ struct btrfs_root *root, int *new,
+ struct btrfs_path *path)
{
struct inode *inode;
@@ -5656,7 +5661,7 @@ struct inode *btrfs_iget(struct super_block *s, struct btrfs_key *location,
if (inode->i_state & I_NEW) {
int ret;
- ret = btrfs_read_locked_inode(inode);
+ ret = btrfs_read_locked_inode(inode, path);
if (!ret) {
inode_tree_add(inode);
unlock_new_inode(inode);
@@ -5678,6 +5683,12 @@ struct inode *btrfs_iget(struct super_block *s, struct btrfs_key *location,
return inode;
}
+struct inode *btrfs_iget(struct super_block *s, struct btrfs_key *location,
+ struct btrfs_root *root, int *new)
+{
+ return btrfs_iget_path(s, location, root, new, NULL);
+}
+
static struct inode *new_simple_dir(struct super_block *s,
struct btrfs_key *key,
struct btrfs_root *root)
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 3ca6943..802a628 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -3488,6 +3488,8 @@ static int btrfs_extent_same_range(struct inode *src, u64 loff, u64 olen,
const u64 sz = BTRFS_I(src)->root->fs_info->sectorsize;
len = round_down(i_size_read(src), sz) - loff;
+ if (len == 0)
+ return 0;
olen = len;
}
}
@@ -4257,9 +4259,17 @@ static noinline int btrfs_clone_files(struct file *file, struct file *file_src,
goto out_unlock;
if (len == 0)
olen = len = src->i_size - off;
- /* if we extend to eof, continue to block boundary */
- if (off + len == src->i_size)
+ /*
+ * If we extend to eof, continue to block boundary if and only if the
+ * destination end offset matches the destination file's size, otherwise
+ * we would be corrupting data by placing the eof block into the middle
+ * of a file.
+ */
+ if (off + len == src->i_size) {
+ if (!IS_ALIGNED(len, bs) && destoff + len < inode->i_size)
+ goto out_unlock;
len = ALIGN(src->i_size, bs) - off;
+ }
if (len == 0) {
ret = 0;
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index b362b45..cbc9d0d 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -1916,7 +1916,7 @@ static int btrfs_remount(struct super_block *sb, int *flags, char *data)
}
/* Used to sort the devices by max_avail(descending sort) */
-static int btrfs_cmp_device_free_bytes(const void *dev_info1,
+static inline int btrfs_cmp_device_free_bytes(const void *dev_info1,
const void *dev_info2)
{
if (((struct btrfs_device_info *)dev_info1)->max_avail >
@@ -1945,8 +1945,8 @@ static inline void btrfs_descending_sort_devices(
* The helper to calc the free space on the devices that can be used to store
* file data.
*/
-static int btrfs_calc_avail_data_space(struct btrfs_fs_info *fs_info,
- u64 *free_bytes)
+static inline int btrfs_calc_avail_data_space(struct btrfs_fs_info *fs_info,
+ u64 *free_bytes)
{
struct btrfs_device_info *devices_info;
struct btrfs_fs_devices *fs_devices = fs_info->fs_devices;
diff --git a/fs/btrfs/tree-checker.c b/fs/btrfs/tree-checker.c
index cab0b1f..efcf89a8 100644
--- a/fs/btrfs/tree-checker.c
+++ b/fs/btrfs/tree-checker.c
@@ -440,7 +440,7 @@ static int check_block_group_item(struct btrfs_fs_info *fs_info,
type != (BTRFS_BLOCK_GROUP_METADATA |
BTRFS_BLOCK_GROUP_DATA)) {
block_group_err(fs_info, leaf, slot,
-"invalid type, have 0x%llx (%lu bits set) expect either 0x%llx, 0x%llx, 0x%llu or 0x%llx",
+"invalid type, have 0x%llx (%lu bits set) expect either 0x%llx, 0x%llx, 0x%llx or 0x%llx",
type, hweight64(type),
BTRFS_BLOCK_GROUP_DATA, BTRFS_BLOCK_GROUP_METADATA,
BTRFS_BLOCK_GROUP_SYSTEM,
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index e07f337..a5ce99a 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -4396,6 +4396,23 @@ static int btrfs_log_changed_extents(struct btrfs_trans_handle *trans,
logged_end = end;
list_for_each_entry_safe(em, n, &tree->modified_extents, list) {
+ /*
+ * Skip extents outside our logging range. It's important to do
+ * it for correctness because if we don't ignore them, we may
+ * log them before their ordered extent completes, and therefore
+ * we could log them without logging their respective checksums
+ * (the checksum items are added to the csum tree at the very
+ * end of btrfs_finish_ordered_io()). Also leave such extents
+ * outside of our range in the list, since we may have another
+ * ranged fsync in the near future that needs them. If an extent
+ * outside our range corresponds to a hole, log it to avoid
+ * leaving gaps between extents (fsck will complain when we are
+ * not using the NO_HOLES feature).
+ */
+ if ((em->start > end || em->start + em->len <= start) &&
+ em->block_start != EXTENT_MAP_HOLE)
+ continue;
+
list_del_init(&em->list);
/*
* Just an arbitrary number, this can be really CPU intensive
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index 27cad84..189df66 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -1931,10 +1931,17 @@ static ssize_t ceph_copy_file_range(struct file *src_file, loff_t src_off,
if (!prealloc_cf)
return -ENOMEM;
- /* Start by sync'ing the source file */
+ /* Start by sync'ing the source and destination files */
ret = file_write_and_wait_range(src_file, src_off, (src_off + len));
- if (ret < 0)
+ if (ret < 0) {
+ dout("failed to write src file (%zd)\n", ret);
goto out;
+ }
+ ret = file_write_and_wait_range(dst_file, dst_off, (dst_off + len));
+ if (ret < 0) {
+ dout("failed to write dst file (%zd)\n", ret);
+ goto out;
+ }
/*
* We need FILE_WR caps for dst_ci and FILE_RD for src_ci as other
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 67a9aeb..bd13a32 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -80,12 +80,8 @@ static int parse_reply_info_in(void **p, void *end,
info->symlink = *p;
*p += info->symlink_len;
- if (features & CEPH_FEATURE_DIRLAYOUTHASH)
- ceph_decode_copy_safe(p, end, &info->dir_layout,
- sizeof(info->dir_layout), bad);
- else
- memset(&info->dir_layout, 0, sizeof(info->dir_layout));
-
+ ceph_decode_copy_safe(p, end, &info->dir_layout,
+ sizeof(info->dir_layout), bad);
ceph_decode_32_safe(p, end, info->xattr_len, bad);
ceph_decode_need(p, end, info->xattr_len, bad);
info->xattr_data = *p;
@@ -3182,10 +3178,8 @@ static void send_mds_reconnect(struct ceph_mds_client *mdsc,
recon_state.pagelist = pagelist;
if (session->s_con.peer_features & CEPH_FEATURE_MDSENC)
recon_state.msg_version = 3;
- else if (session->s_con.peer_features & CEPH_FEATURE_FLOCK)
- recon_state.msg_version = 2;
else
- recon_state.msg_version = 1;
+ recon_state.msg_version = 2;
err = iterate_session_caps(session, encode_caps_cb, &recon_state);
if (err < 0)
goto fail;
diff --git a/fs/ceph/quota.c b/fs/ceph/quota.c
index 32d4f13..03f4d24 100644
--- a/fs/ceph/quota.c
+++ b/fs/ceph/quota.c
@@ -237,7 +237,8 @@ static bool check_quota_exceeded(struct inode *inode, enum quota_check_op op,
ceph_put_snap_realm(mdsc, realm);
realm = next;
}
- ceph_put_snap_realm(mdsc, realm);
+ if (realm)
+ ceph_put_snap_realm(mdsc, realm);
up_read(&mdsc->snap_rwsem);
return exceeded;
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 05f01fb..22a9d81 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -5835,9 +5835,10 @@ int ext4_mark_iloc_dirty(handle_t *handle,
{
int err = 0;
- if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb))))
+ if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb)))) {
+ put_bh(iloc->bh);
return -EIO;
-
+ }
if (IS_I_VERSION(inode))
inode_inc_iversion(inode);
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 17adcb1..437f71f 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -126,6 +126,7 @@ static struct buffer_head *__ext4_read_dirblock(struct inode *inode,
if (!is_dx_block && type == INDEX) {
ext4_error_inode(inode, func, line, block,
"directory leaf block found instead of index block");
+ brelse(bh);
return ERR_PTR(-EFSCORRUPTED);
}
if (!ext4_has_metadata_csum(inode->i_sb) ||
@@ -2811,7 +2812,9 @@ int ext4_orphan_add(handle_t *handle, struct inode *inode)
list_del_init(&EXT4_I(inode)->i_orphan);
mutex_unlock(&sbi->s_orphan_lock);
}
- }
+ } else
+ brelse(iloc.bh);
+
jbd_debug(4, "superblock will point to %lu\n", inode->i_ino);
jbd_debug(4, "orphan inode %lu will point to %d\n",
inode->i_ino, NEXT_ORPHAN(inode));
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index ebbc663..a5efee3 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -459,16 +459,18 @@ static int set_flexbg_block_bitmap(struct super_block *sb, handle_t *handle,
BUFFER_TRACE(bh, "get_write_access");
err = ext4_journal_get_write_access(handle, bh);
- if (err)
+ if (err) {
+ brelse(bh);
return err;
+ }
ext4_debug("mark block bitmap %#04llx (+%llu/%u)\n",
first_cluster, first_cluster - start, count2);
ext4_set_bits(bh->b_data, first_cluster - start, count2);
err = ext4_handle_dirty_metadata(handle, NULL, bh);
+ brelse(bh);
if (unlikely(err))
return err;
- brelse(bh);
}
return 0;
@@ -605,7 +607,6 @@ static int setup_new_flex_group_blocks(struct super_block *sb,
bh = bclean(handle, sb, block);
if (IS_ERR(bh)) {
err = PTR_ERR(bh);
- bh = NULL;
goto out;
}
overhead = ext4_group_overhead_blocks(sb, group);
@@ -618,9 +619,9 @@ static int setup_new_flex_group_blocks(struct super_block *sb,
ext4_mark_bitmap_end(EXT4_B2C(sbi, group_data[i].blocks_count),
sb->s_blocksize * 8, bh->b_data);
err = ext4_handle_dirty_metadata(handle, NULL, bh);
+ brelse(bh);
if (err)
goto out;
- brelse(bh);
handle_ib:
if (bg_flags[i] & EXT4_BG_INODE_UNINIT)
@@ -635,18 +636,16 @@ static int setup_new_flex_group_blocks(struct super_block *sb,
bh = bclean(handle, sb, block);
if (IS_ERR(bh)) {
err = PTR_ERR(bh);
- bh = NULL;
goto out;
}
ext4_mark_bitmap_end(EXT4_INODES_PER_GROUP(sb),
sb->s_blocksize * 8, bh->b_data);
err = ext4_handle_dirty_metadata(handle, NULL, bh);
+ brelse(bh);
if (err)
goto out;
- brelse(bh);
}
- bh = NULL;
/* Mark group tables in block bitmap */
for (j = 0; j < GROUP_TABLE_COUNT; j++) {
@@ -685,7 +684,6 @@ static int setup_new_flex_group_blocks(struct super_block *sb,
}
out:
- brelse(bh);
err2 = ext4_journal_stop(handle);
if (err2 && !err)
err = err2;
@@ -873,6 +871,7 @@ static int add_new_gdb(handle_t *handle, struct inode *inode,
err = ext4_handle_dirty_metadata(handle, NULL, gdb_bh);
if (unlikely(err)) {
ext4_std_error(sb, err);
+ iloc.bh = NULL;
goto exit_inode;
}
brelse(dind);
@@ -924,6 +923,7 @@ static int add_new_gdb_meta_bg(struct super_block *sb,
sizeof(struct buffer_head *),
GFP_NOFS);
if (!n_group_desc) {
+ brelse(gdb_bh);
err = -ENOMEM;
ext4_warning(sb, "not enough memory for %lu groups",
gdb_num + 1);
@@ -939,8 +939,6 @@ static int add_new_gdb_meta_bg(struct super_block *sb,
kvfree(o_group_desc);
BUFFER_TRACE(gdb_bh, "get_write_access");
err = ext4_journal_get_write_access(handle, gdb_bh);
- if (unlikely(err))
- brelse(gdb_bh);
return err;
}
@@ -1124,8 +1122,10 @@ static void update_backups(struct super_block *sb, sector_t blk_off, char *data,
backup_block, backup_block -
ext4_group_first_block_no(sb, group));
BUFFER_TRACE(bh, "get_write_access");
- if ((err = ext4_journal_get_write_access(handle, bh)))
+ if ((err = ext4_journal_get_write_access(handle, bh))) {
+ brelse(bh);
break;
+ }
lock_buffer(bh);
memcpy(bh->b_data, data, size);
if (rest)
@@ -2023,7 +2023,7 @@ int ext4_resize_fs(struct super_block *sb, ext4_fsblk_t n_blocks_count)
err = ext4_alloc_flex_bg_array(sb, n_group + 1);
if (err)
- return err;
+ goto out;
err = ext4_mb_alloc_groupinfo(sb, n_group + 1);
if (err)
@@ -2059,6 +2059,10 @@ int ext4_resize_fs(struct super_block *sb, ext4_fsblk_t n_blocks_count)
n_blocks_count_retry = 0;
free_flex_gd(flex_gd);
flex_gd = NULL;
+ if (resize_inode) {
+ iput(resize_inode);
+ resize_inode = NULL;
+ }
goto retry;
}
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index a221f1c..53ff6c2 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -4075,6 +4075,14 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
sbi->s_groups_count = blocks_count;
sbi->s_blockfile_groups = min_t(ext4_group_t, sbi->s_groups_count,
(EXT4_MAX_BLOCK_FILE_PHYS / EXT4_BLOCKS_PER_GROUP(sb)));
+ if (((u64)sbi->s_groups_count * sbi->s_inodes_per_group) !=
+ le32_to_cpu(es->s_inodes_count)) {
+ ext4_msg(sb, KERN_ERR, "inodes count not valid: %u vs %llu",
+ le32_to_cpu(es->s_inodes_count),
+ ((u64)sbi->s_groups_count * sbi->s_inodes_per_group));
+ ret = -EINVAL;
+ goto failed_mount;
+ }
db_count = (sbi->s_groups_count + EXT4_DESC_PER_BLOCK(sb) - 1) /
EXT4_DESC_PER_BLOCK(sb);
if (ext4_has_feature_meta_bg(sb)) {
@@ -4094,14 +4102,6 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
ret = -ENOMEM;
goto failed_mount;
}
- if (((u64)sbi->s_groups_count * sbi->s_inodes_per_group) !=
- le32_to_cpu(es->s_inodes_count)) {
- ext4_msg(sb, KERN_ERR, "inodes count not valid: %u vs %llu",
- le32_to_cpu(es->s_inodes_count),
- ((u64)sbi->s_groups_count * sbi->s_inodes_per_group));
- ret = -EINVAL;
- goto failed_mount;
- }
bgl_lock_init(sbi->s_blockgroup_lock);
@@ -4510,6 +4510,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
percpu_counter_destroy(&sbi->s_freeinodes_counter);
percpu_counter_destroy(&sbi->s_dirs_counter);
percpu_counter_destroy(&sbi->s_dirtyclusters_counter);
+ percpu_free_rwsem(&sbi->s_journal_flag_rwsem);
failed_mount5:
ext4_ext_release(sb);
ext4_release_system_zone(sb);
diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c
index f36fc5d5..7643d52 100644
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -1031,10 +1031,8 @@ static int ext4_xattr_inode_update_ref(handle_t *handle, struct inode *ea_inode,
inode_lock(ea_inode);
ret = ext4_reserve_inode_write(handle, ea_inode, &iloc);
- if (ret) {
- iloc.bh = NULL;
+ if (ret)
goto out;
- }
ref_count = ext4_xattr_inode_get_ref(ea_inode);
ref_count += ref_change;
@@ -1080,12 +1078,10 @@ static int ext4_xattr_inode_update_ref(handle_t *handle, struct inode *ea_inode,
}
ret = ext4_mark_iloc_dirty(handle, ea_inode, &iloc);
- iloc.bh = NULL;
if (ret)
ext4_warning_inode(ea_inode,
"ext4_mark_iloc_dirty() failed ret=%d", ret);
out:
- brelse(iloc.bh);
inode_unlock(ea_inode);
return ret;
}
@@ -1388,6 +1384,12 @@ static int ext4_xattr_inode_write(handle_t *handle, struct inode *ea_inode,
bh = ext4_getblk(handle, ea_inode, block, 0);
if (IS_ERR(bh))
return PTR_ERR(bh);
+ if (!bh) {
+ WARN_ON_ONCE(1);
+ EXT4_ERROR_INODE(ea_inode,
+ "ext4_getblk() return bh = NULL");
+ return -EFSCORRUPTED;
+ }
ret = ext4_journal_get_write_access(handle, bh);
if (ret)
goto out;
@@ -2276,8 +2278,10 @@ static struct buffer_head *ext4_xattr_get_block(struct inode *inode)
if (!bh)
return ERR_PTR(-EIO);
error = ext4_xattr_check_block(inode, bh);
- if (error)
+ if (error) {
+ brelse(bh);
return ERR_PTR(error);
+ }
return bh;
}
@@ -2397,6 +2401,8 @@ ext4_xattr_set_handle(handle_t *handle, struct inode *inode, int name_index,
error = ext4_xattr_block_set(handle, inode, &i, &bs);
} else if (error == -ENOSPC) {
if (EXT4_I(inode)->i_file_acl && !bs.s.base) {
+ brelse(bs.bh);
+ bs.bh = NULL;
error = ext4_xattr_block_find(inode, &i, &bs);
if (error)
goto cleanup;
@@ -2617,6 +2623,8 @@ static int ext4_xattr_move_to_block(handle_t *handle, struct inode *inode,
kfree(buffer);
if (is)
brelse(is->iloc.bh);
+ if (bs)
+ brelse(bs->bh);
kfree(is);
kfree(bs);
@@ -2696,7 +2704,6 @@ int ext4_expand_extra_isize_ea(struct inode *inode, int new_extra_isize,
struct ext4_inode *raw_inode, handle_t *handle)
{
struct ext4_xattr_ibody_header *header;
- struct buffer_head *bh;
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
static unsigned int mnt_count;
size_t min_offs;
@@ -2737,13 +2744,17 @@ int ext4_expand_extra_isize_ea(struct inode *inode, int new_extra_isize,
* EA block can hold new_extra_isize bytes.
*/
if (EXT4_I(inode)->i_file_acl) {
+ struct buffer_head *bh;
+
bh = sb_bread(inode->i_sb, EXT4_I(inode)->i_file_acl);
error = -EIO;
if (!bh)
goto cleanup;
error = ext4_xattr_check_block(inode, bh);
- if (error)
+ if (error) {
+ brelse(bh);
goto cleanup;
+ }
base = BHDR(bh);
end = bh->b_data + bh->b_size;
min_offs = end - base;
diff --git a/fs/namespace.c b/fs/namespace.c
index 98d27da..74f6429 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1540,8 +1540,13 @@ static int do_umount(struct mount *mnt, int flags)
namespace_lock();
lock_mount_hash();
- event++;
+ /* Recheck MNT_LOCKED with the locks held */
+ retval = -EINVAL;
+ if (mnt->mnt.mnt_flags & MNT_LOCKED)
+ goto out;
+
+ event++;
if (flags & MNT_DETACH) {
if (!list_empty(&mnt->mnt_list))
umount_tree(mnt, UMOUNT_PROPAGATE);
@@ -1555,6 +1560,7 @@ static int do_umount(struct mount *mnt, int flags)
retval = 0;
}
}
+out:
unlock_mount_hash();
namespace_unlock();
return retval;
@@ -1645,7 +1651,7 @@ int ksys_umount(char __user *name, int flags)
goto dput_and_out;
if (!check_mnt(mnt))
goto dput_and_out;
- if (mnt->mnt.mnt_flags & MNT_LOCKED)
+ if (mnt->mnt.mnt_flags & MNT_LOCKED) /* Check optimistically */
goto dput_and_out;
retval = -EPERM;
if (flags & MNT_FORCE && !capable(CAP_SYS_ADMIN))
@@ -1728,8 +1734,14 @@ struct mount *copy_tree(struct mount *mnt, struct dentry *dentry,
for (s = r; s; s = next_mnt(s, r)) {
if (!(flag & CL_COPY_UNBINDABLE) &&
IS_MNT_UNBINDABLE(s)) {
- s = skip_mnt_tree(s);
- continue;
+ if (s->mnt.mnt_flags & MNT_LOCKED) {
+ /* Both unbindable and locked. */
+ q = ERR_PTR(-EPERM);
+ goto out;
+ } else {
+ s = skip_mnt_tree(s);
+ continue;
+ }
}
if (!(flag & CL_COPY_MNT_NS_FILE) &&
is_mnt_ns_file(s->mnt.mnt_root)) {
@@ -1782,7 +1794,7 @@ void drop_collected_mounts(struct vfsmount *mnt)
{
namespace_lock();
lock_mount_hash();
- umount_tree(real_mount(mnt), UMOUNT_SYNC);
+ umount_tree(real_mount(mnt), 0);
unlock_mount_hash();
namespace_unlock();
}
diff --git a/fs/xfs/libxfs/xfs_attr_leaf.c b/fs/xfs/libxfs/xfs_attr_leaf.c
index 6fc5425..2652d00 100644
--- a/fs/xfs/libxfs/xfs_attr_leaf.c
+++ b/fs/xfs/libxfs/xfs_attr_leaf.c
@@ -243,7 +243,7 @@ xfs_attr3_leaf_verify(
struct xfs_mount *mp = bp->b_target->bt_mount;
struct xfs_attr_leafblock *leaf = bp->b_addr;
struct xfs_attr_leaf_entry *entries;
- uint16_t end;
+ uint32_t end; /* must be 32bit - see below */
int i;
xfs_attr3_leaf_hdr_from_disk(mp->m_attr_geo, &ichdr, leaf);
@@ -293,6 +293,11 @@ xfs_attr3_leaf_verify(
/*
* Quickly check the freemap information. Attribute data has to be
* aligned to 4-byte boundaries, and likewise for the free space.
+ *
+ * Note that for 64k block size filesystems, the freemap entries cannot
+ * overflow as they are only be16 fields. However, when checking end
+ * pointer of the freemap, we have to be careful to detect overflows and
+ * so use uint32_t for those checks.
*/
for (i = 0; i < XFS_ATTR_LEAF_MAPSIZE; i++) {
if (ichdr.freemap[i].base > mp->m_attr_geo->blksize)
@@ -303,7 +308,9 @@ xfs_attr3_leaf_verify(
return __this_address;
if (ichdr.freemap[i].size & 0x3)
return __this_address;
- end = ichdr.freemap[i].base + ichdr.freemap[i].size;
+
+ /* be care of 16 bit overflows here */
+ end = (uint32_t)ichdr.freemap[i].base + ichdr.freemap[i].size;
if (end < ichdr.freemap[i].base)
return __this_address;
if (end > mp->m_attr_geo->blksize)
diff --git a/fs/xfs/xfs_ioctl.c b/fs/xfs/xfs_ioctl.c
index 6e2c08f..6ecdbb3 100644
--- a/fs/xfs/xfs_ioctl.c
+++ b/fs/xfs/xfs_ioctl.c
@@ -1608,7 +1608,7 @@ xfs_ioc_getbmap(
error = 0;
out_free_buf:
kmem_free(buf);
- return 0;
+ return error;
}
struct getfsmap_info {
diff --git a/fs/xfs/xfs_message.c b/fs/xfs/xfs_message.c
index 576c375..6b736ea 100644
--- a/fs/xfs/xfs_message.c
+++ b/fs/xfs/xfs_message.c
@@ -107,5 +107,5 @@ assfail(char *expr, char *file, int line)
void
xfs_hex_dump(void *p, int length)
{
- print_hex_dump(KERN_ALERT, "", DUMP_PREFIX_ADDRESS, 16, 1, p, length, 1);
+ print_hex_dump(KERN_ALERT, "", DUMP_PREFIX_OFFSET, 16, 1, p, length, 1);
}
diff --git a/include/asm-generic/4level-fixup.h b/include/asm-generic/4level-fixup.h
index 89f3b03..e3667c9 100644
--- a/include/asm-generic/4level-fixup.h
+++ b/include/asm-generic/4level-fixup.h
@@ -3,7 +3,7 @@
#define _4LEVEL_FIXUP_H
#define __ARCH_HAS_4LEVEL_HACK
-#define __PAGETABLE_PUD_FOLDED
+#define __PAGETABLE_PUD_FOLDED 1
#define PUD_SHIFT PGDIR_SHIFT
#define PUD_SIZE PGDIR_SIZE
diff --git a/include/asm-generic/5level-fixup.h b/include/asm-generic/5level-fixup.h
index 9c2e070..73474bb 100644
--- a/include/asm-generic/5level-fixup.h
+++ b/include/asm-generic/5level-fixup.h
@@ -3,7 +3,7 @@
#define _5LEVEL_FIXUP_H
#define __ARCH_HAS_5LEVEL_HACK
-#define __PAGETABLE_P4D_FOLDED
+#define __PAGETABLE_P4D_FOLDED 1
#define P4D_SHIFT PGDIR_SHIFT
#define P4D_SIZE PGDIR_SIZE
diff --git a/include/asm-generic/pgtable-nop4d-hack.h b/include/asm-generic/pgtable-nop4d-hack.h
index 0c34215..1d6dd38 100644
--- a/include/asm-generic/pgtable-nop4d-hack.h
+++ b/include/asm-generic/pgtable-nop4d-hack.h
@@ -5,7 +5,7 @@
#ifndef __ASSEMBLY__
#include <asm-generic/5level-fixup.h>
-#define __PAGETABLE_PUD_FOLDED
+#define __PAGETABLE_PUD_FOLDED 1
/*
* Having the pud type consist of a pgd gets the size right, and allows
diff --git a/include/asm-generic/pgtable-nop4d.h b/include/asm-generic/pgtable-nop4d.h
index 1a29b2a..04cb913 100644
--- a/include/asm-generic/pgtable-nop4d.h
+++ b/include/asm-generic/pgtable-nop4d.h
@@ -4,7 +4,7 @@
#ifndef __ASSEMBLY__
-#define __PAGETABLE_P4D_FOLDED
+#define __PAGETABLE_P4D_FOLDED 1
typedef struct { pgd_t pgd; } p4d_t;
diff --git a/include/asm-generic/pgtable-nopmd.h b/include/asm-generic/pgtable-nopmd.h
index f35f6e8..b85b827 100644
--- a/include/asm-generic/pgtable-nopmd.h
+++ b/include/asm-generic/pgtable-nopmd.h
@@ -8,7 +8,7 @@
struct mm_struct;
-#define __PAGETABLE_PMD_FOLDED
+#define __PAGETABLE_PMD_FOLDED 1
/*
* Having the pmd type consist of a pud gets the size right, and allows
diff --git a/include/asm-generic/pgtable-nopud.h b/include/asm-generic/pgtable-nopud.h
index e950b9c..9bef475d 100644
--- a/include/asm-generic/pgtable-nopud.h
+++ b/include/asm-generic/pgtable-nopud.h
@@ -9,7 +9,7 @@
#else
#include <asm-generic/pgtable-nop4d.h>
-#define __PAGETABLE_PUD_FOLDED
+#define __PAGETABLE_PUD_FOLDED 1
/*
* Having the pud type consist of a p4d gets the size right, and allows
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index 5657a20..359fb93 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -1127,4 +1127,20 @@ static inline bool arch_has_pfn_modify_check(void)
#endif
#endif
+/*
+ * On some architectures it depends on the mm if the p4d/pud or pmd
+ * layer of the page table hierarchy is folded or not.
+ */
+#ifndef mm_p4d_folded
+#define mm_p4d_folded(mm) __is_defined(__PAGETABLE_P4D_FOLDED)
+#endif
+
+#ifndef mm_pud_folded
+#define mm_pud_folded(mm) __is_defined(__PAGETABLE_PUD_FOLDED)
+#endif
+
+#ifndef mm_pmd_folded
+#define mm_pmd_folded(mm) __is_defined(__PAGETABLE_PMD_FOLDED)
+#endif
+
#endif /* _ASM_GENERIC_PGTABLE_H */
diff --git a/include/dt-bindings/power/rk3066-power.h b/include/dt-bindings/power/rk3066-power.h
new file mode 100644
index 0000000..acf9f31
--- /dev/null
+++ b/include/dt-bindings/power/rk3066-power.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DT_BINDINGS_POWER_RK3066_POWER_H__
+#define __DT_BINDINGS_POWER_RK3066_POWER_H__
+
+/* VD_CORE */
+#define RK3066_PD_A9_0 0
+#define RK3066_PD_A9_1 1
+#define RK3066_PD_DBG 4
+#define RK3066_PD_SCU 5
+
+/* VD_LOGIC */
+#define RK3066_PD_VIDEO 6
+#define RK3066_PD_VIO 7
+#define RK3066_PD_GPU 8
+#define RK3066_PD_PERI 9
+#define RK3066_PD_CPU 10
+#define RK3066_PD_ALIVE 11
+
+/* VD_PMU */
+#define RK3066_PD_RTC 12
+
+#endif
diff --git a/include/dt-bindings/power/rk3188-power.h b/include/dt-bindings/power/rk3188-power.h
new file mode 100644
index 0000000..93d23df
--- /dev/null
+++ b/include/dt-bindings/power/rk3188-power.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DT_BINDINGS_POWER_RK3188_POWER_H__
+#define __DT_BINDINGS_POWER_RK3188_POWER_H__
+
+/* VD_CORE */
+#define RK3188_PD_A9_0 0
+#define RK3188_PD_A9_1 1
+#define RK3188_PD_A9_2 2
+#define RK3188_PD_A9_3 3
+#define RK3188_PD_DBG 4
+#define RK3188_PD_SCU 5
+
+/* VD_LOGIC */
+#define RK3188_PD_VIDEO 6
+#define RK3188_PD_VIO 7
+#define RK3188_PD_GPU 8
+#define RK3188_PD_PERI 9
+#define RK3188_PD_CPU 10
+#define RK3188_PD_ALIVE 11
+
+/* VD_PMU */
+#define RK3188_PD_RTC 12
+
+#endif
diff --git a/include/dt-bindings/thermal/tegra194-bpmp-thermal.h b/include/dt-bindings/thermal/tegra194-bpmp-thermal.h
new file mode 100644
index 0000000..aa7fb08
--- /dev/null
+++ b/include/dt-bindings/thermal/tegra194-bpmp-thermal.h
@@ -0,0 +1,15 @@
+/*
+ * This header provides constants for binding nvidia,tegra194-bpmp-thermal.
+ */
+
+#ifndef _DT_BINDINGS_THERMAL_TEGRA194_BPMP_THERMAL_H
+#define _DT_BINDINGS_THERMAL_TEGRA194_BPMP_THERMAL_H
+
+#define TEGRA194_BPMP_THERMAL_ZONE_CPU 2
+#define TEGRA194_BPMP_THERMAL_ZONE_GPU 3
+#define TEGRA194_BPMP_THERMAL_ZONE_AUX 4
+#define TEGRA194_BPMP_THERMAL_ZONE_PLLX 5
+#define TEGRA194_BPMP_THERMAL_ZONE_AO 6
+#define TEGRA194_BPMP_THERMAL_ZONE_TJ_MAX 7
+
+#endif
diff --git a/include/linux/ceph/ceph_features.h b/include/linux/ceph/ceph_features.h
index 6b92b33..65a38c4 100644
--- a/include/linux/ceph/ceph_features.h
+++ b/include/linux/ceph/ceph_features.h
@@ -213,12 +213,6 @@ DEFINE_CEPH_FEATURE_DEPRECATED(63, 1, RESERVED_BROKEN, LUMINOUS) // client-facin
CEPH_FEATURE_NEW_OSDOPREPLY_ENCODING | \
CEPH_FEATURE_CEPHX_V2)
-#define CEPH_FEATURES_REQUIRED_DEFAULT \
- (CEPH_FEATURE_NOSRCADDR | \
- CEPH_FEATURE_SUBSCRIBE2 | \
- CEPH_FEATURE_RECONNECT_SEQ | \
- CEPH_FEATURE_PGID64 | \
- CEPH_FEATURE_PGPOOL3 | \
- CEPH_FEATURE_OSDENC)
+#define CEPH_FEATURES_REQUIRED_DEFAULT 0
#endif
diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
index c0f5db3..2010493 100644
--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -143,18 +143,6 @@
#define KASAN_ABI_VERSION 3
#endif
-/*
- * Because __no_sanitize_address conflicts with inlining:
- * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67368
- * we do one or the other.
- */
-#ifdef CONFIG_KASAN
-#define __no_sanitize_address_or_inline \
- __no_sanitize_address __maybe_unused notrace
-#else
-#define __no_sanitize_address_or_inline inline
-#endif
-
#if GCC_VERSION >= 50100
#define COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW 1
#endif
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 18c80cf..06396c1 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -189,7 +189,7 @@ void __read_once_size(const volatile void *p, void *res, int size)
* https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67368
* '__maybe_unused' allows us to avoid defined-but-not-used warnings.
*/
-# define __no_kasan_or_inline __no_sanitize_address __maybe_unused
+# define __no_kasan_or_inline __no_sanitize_address notrace __maybe_unused
#else
# define __no_kasan_or_inline __always_inline
#endif
diff --git a/include/linux/compiler_attributes.h b/include/linux/compiler_attributes.h
index 6b28c1b..f8c400b 100644
--- a/include/linux/compiler_attributes.h
+++ b/include/linux/compiler_attributes.h
@@ -4,22 +4,26 @@
/*
* The attributes in this file are unconditionally defined and they directly
- * map to compiler attribute(s) -- except those that are optional.
+ * map to compiler attribute(s), unless one of the compilers does not support
+ * the attribute. In that case, __has_attribute is used to check for support
+ * and the reason is stated in its comment ("Optional: ...").
*
* Any other "attributes" (i.e. those that depend on a configuration option,
* on a compiler, on an architecture, on plugins, on other attributes...)
* should be defined elsewhere (e.g. compiler_types.h or compiler-*.h).
+ * The intention is to keep this file as simple as possible, as well as
+ * compiler- and version-agnostic (e.g. avoiding GCC_VERSION checks).
*
* This file is meant to be sorted (by actual attribute name,
* not by #define identifier). Use the __attribute__((__name__)) syntax
* (i.e. with underscores) to avoid future collisions with other macros.
- * If an attribute is optional, state the reason in the comment.
+ * Provide links to the documentation of each supported compiler, if it exists.
*/
/*
- * To check for optional attributes, we use __has_attribute, which is supported
- * on gcc >= 5, clang >= 2.9 and icc >= 17. In the meantime, to support
- * 4.6 <= gcc < 5, we implement __has_attribute by hand.
+ * __has_attribute is supported on gcc >= 5, clang >= 2.9 and icc >= 17.
+ * In the meantime, to support 4.6 <= gcc < 5, we implement __has_attribute
+ * by hand.
*
* sparse does not support __has_attribute (yet) and defines __GNUC_MINOR__
* depending on the compiler used to build it; however, these attributes have
diff --git a/include/linux/compiler_types.h b/include/linux/compiler_types.h
index 3439d7d..4a3f9c0 100644
--- a/include/linux/compiler_types.h
+++ b/include/linux/compiler_types.h
@@ -130,6 +130,10 @@ struct ftrace_likely_data {
# define randomized_struct_fields_end
#endif
+#ifndef asm_volatile_goto
+#define asm_volatile_goto(x...) asm goto(x)
+#endif
+
/* Are two types/vars the same type (ignoring qualifiers)? */
#define __same_type(a, b) __builtin_types_compatible_p(typeof(a), typeof(b))
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 2827b87..387c70d 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -722,8 +722,8 @@ struct hid_usage_id {
* input will not be passed to raw_event unless hid_device_io_start is
* called.
*
- * raw_event and event should return 0 on no action performed, 1 when no
- * further processing should be done and negative on error
+ * raw_event and event should return negative on error, any other value will
+ * pass the event on to .event() typically return 0 for success.
*
* input_mapping shall return a negative value to completely ignore this usage
* (e.g. doubled or invalid usage), zero to continue with parsing of this
diff --git a/include/linux/i8253.h b/include/linux/i8253.h
index e6bb36a..8336b2f 100644
--- a/include/linux/i8253.h
+++ b/include/linux/i8253.h
@@ -21,6 +21,7 @@
#define PIT_LATCH ((PIT_TICK_RATE + HZ/2) / HZ)
extern raw_spinlock_t i8253_lock;
+extern bool i8253_clear_counter_on_shutdown;
extern struct clock_event_device i8253_clockevent;
extern void clockevent_i8253_init(bool oneshot);
diff --git a/include/linux/mm.h b/include/linux/mm.h
index fcf9cc9..5411de9 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1744,11 +1744,15 @@ int __pud_alloc(struct mm_struct *mm, p4d_t *p4d, unsigned long address);
static inline void mm_inc_nr_puds(struct mm_struct *mm)
{
+ if (mm_pud_folded(mm))
+ return;
atomic_long_add(PTRS_PER_PUD * sizeof(pud_t), &mm->pgtables_bytes);
}
static inline void mm_dec_nr_puds(struct mm_struct *mm)
{
+ if (mm_pud_folded(mm))
+ return;
atomic_long_sub(PTRS_PER_PUD * sizeof(pud_t), &mm->pgtables_bytes);
}
#endif
@@ -1768,11 +1772,15 @@ int __pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address);
static inline void mm_inc_nr_pmds(struct mm_struct *mm)
{
+ if (mm_pmd_folded(mm))
+ return;
atomic_long_add(PTRS_PER_PMD * sizeof(pmd_t), &mm->pgtables_bytes);
}
static inline void mm_dec_nr_pmds(struct mm_struct *mm)
{
+ if (mm_pmd_folded(mm))
+ return;
atomic_long_sub(PTRS_PER_PMD * sizeof(pmd_t), &mm->pgtables_bytes);
}
#endif
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index abe975c..7f53ece 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -324,9 +324,8 @@ static inline unsigned int nanddev_ntargets(const struct nand_device *nand)
*/
static inline unsigned int nanddev_neraseblocks(const struct nand_device *nand)
{
- return (u64)nand->memorg.luns_per_target *
- nand->memorg.eraseblocks_per_lun *
- nand->memorg.pages_per_eraseblock;
+ return nand->memorg.ntargets * nand->memorg.luns_per_target *
+ nand->memorg.eraseblocks_per_lun;
}
/**
@@ -569,7 +568,7 @@ static inline void nanddev_pos_next_eraseblock(struct nand_device *nand,
}
/**
- * nanddev_pos_next_eraseblock() - Move a position to the next page
+ * nanddev_pos_next_page() - Move a position to the next page
* @nand: NAND device
* @pos: the position to update
*
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index dc1d9ed..857f8ab 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -3190,6 +3190,26 @@ static inline void netdev_tx_sent_queue(struct netdev_queue *dev_queue,
#endif
}
+/* Variant of netdev_tx_sent_queue() for drivers that are aware
+ * that they should not test BQL status themselves.
+ * We do want to change __QUEUE_STATE_STACK_XOFF only for the last
+ * skb of a batch.
+ * Returns true if the doorbell must be used to kick the NIC.
+ */
+static inline bool __netdev_tx_sent_queue(struct netdev_queue *dev_queue,
+ unsigned int bytes,
+ bool xmit_more)
+{
+ if (xmit_more) {
+#ifdef CONFIG_BQL
+ dql_queued(&dev_queue->dql, bytes);
+#endif
+ return netif_tx_queue_stopped(dev_queue);
+ }
+ netdev_tx_sent_queue(dev_queue, bytes);
+ return true;
+}
+
/**
* netdev_sent_queue - report the number of bytes queued to hardware
* @dev: network device
diff --git a/include/linux/netfilter/ipset/ip_set.h b/include/linux/netfilter/ipset/ip_set.h
index 34fc80f..1d100ef 100644
--- a/include/linux/netfilter/ipset/ip_set.h
+++ b/include/linux/netfilter/ipset/ip_set.h
@@ -314,7 +314,7 @@ enum {
extern ip_set_id_t ip_set_get_byname(struct net *net,
const char *name, struct ip_set **set);
extern void ip_set_put_byindex(struct net *net, ip_set_id_t index);
-extern const char *ip_set_name_byindex(struct net *net, ip_set_id_t index);
+extern void ip_set_name_byindex(struct net *net, ip_set_id_t index, char *name);
extern ip_set_id_t ip_set_nfnl_get_byindex(struct net *net, ip_set_id_t index);
extern void ip_set_nfnl_put(struct net *net, ip_set_id_t index);
diff --git a/include/linux/netfilter/ipset/ip_set_comment.h b/include/linux/netfilter/ipset/ip_set_comment.h
index 8e2bab1..70877f8d 100644
--- a/include/linux/netfilter/ipset/ip_set_comment.h
+++ b/include/linux/netfilter/ipset/ip_set_comment.h
@@ -43,11 +43,11 @@ ip_set_init_comment(struct ip_set *set, struct ip_set_comment *comment,
rcu_assign_pointer(comment->c, c);
}
-/* Used only when dumping a set, protected by rcu_read_lock_bh() */
+/* Used only when dumping a set, protected by rcu_read_lock() */
static inline int
ip_set_put_comment(struct sk_buff *skb, const struct ip_set_comment *comment)
{
- struct ip_set_comment_rcu *c = rcu_dereference_bh(comment->c);
+ struct ip_set_comment_rcu *c = rcu_dereference(comment->c);
if (!c)
return 0;
diff --git a/include/linux/nmi.h b/include/linux/nmi.h
index 08f9247..9003e29 100644
--- a/include/linux/nmi.h
+++ b/include/linux/nmi.h
@@ -119,6 +119,8 @@ static inline int hardlockup_detector_perf_init(void) { return 0; }
void watchdog_nmi_stop(void);
void watchdog_nmi_start(void);
int watchdog_nmi_probe(void);
+int watchdog_nmi_enable(unsigned int cpu);
+void watchdog_nmi_disable(unsigned int cpu);
/**
* touch_nmi_watchdog - restart NMI watchdog timeout.
diff --git a/include/net/addrconf.h b/include/net/addrconf.h
index 14b789a..1656c59 100644
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -317,6 +317,8 @@ bool ipv6_chk_acast_addr(struct net *net, struct net_device *dev,
const struct in6_addr *addr);
bool ipv6_chk_acast_addr_src(struct net *net, struct net_device *dev,
const struct in6_addr *addr);
+int ipv6_anycast_init(void);
+void ipv6_anycast_cleanup(void);
/* Device notifier */
int register_inet6addr_notifier(struct notifier_block *nb);
diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h
index d7578cf..c9c78c1 100644
--- a/include/net/if_inet6.h
+++ b/include/net/if_inet6.h
@@ -146,10 +146,12 @@ struct ifacaddr6 {
struct in6_addr aca_addr;
struct fib6_info *aca_rt;
struct ifacaddr6 *aca_next;
+ struct hlist_node aca_addr_lst;
int aca_users;
refcount_t aca_refcnt;
unsigned long aca_cstamp;
unsigned long aca_tstamp;
+ struct rcu_head rcu;
};
#define IFA_HOST IPV6_ADDR_LOOPBACK
diff --git a/include/net/netfilter/nf_conntrack_l4proto.h b/include/net/netfilter/nf_conntrack_l4proto.h
index eed04af..ae7b86f 100644
--- a/include/net/netfilter/nf_conntrack_l4proto.h
+++ b/include/net/netfilter/nf_conntrack_l4proto.h
@@ -153,4 +153,43 @@ void nf_ct_l4proto_log_invalid(const struct sk_buff *skb,
const char *fmt, ...) { }
#endif /* CONFIG_SYSCTL */
+static inline struct nf_generic_net *nf_generic_pernet(struct net *net)
+{
+ return &net->ct.nf_ct_proto.generic;
+}
+
+static inline struct nf_tcp_net *nf_tcp_pernet(struct net *net)
+{
+ return &net->ct.nf_ct_proto.tcp;
+}
+
+static inline struct nf_udp_net *nf_udp_pernet(struct net *net)
+{
+ return &net->ct.nf_ct_proto.udp;
+}
+
+static inline struct nf_icmp_net *nf_icmp_pernet(struct net *net)
+{
+ return &net->ct.nf_ct_proto.icmp;
+}
+
+static inline struct nf_icmp_net *nf_icmpv6_pernet(struct net *net)
+{
+ return &net->ct.nf_ct_proto.icmpv6;
+}
+
+#ifdef CONFIG_NF_CT_PROTO_DCCP
+static inline struct nf_dccp_net *nf_dccp_pernet(struct net *net)
+{
+ return &net->ct.nf_ct_proto.dccp;
+}
+#endif
+
+#ifdef CONFIG_NF_CT_PROTO_SCTP
+static inline struct nf_sctp_net *nf_sctp_pernet(struct net *net)
+{
+ return &net->ct.nf_ct_proto.sctp;
+}
+#endif
+
#endif /*_NF_CONNTRACK_PROTOCOL_H*/
diff --git a/include/uapi/linux/kfd_ioctl.h b/include/uapi/linux/kfd_ioctl.h
index f5ff8a7..b01eb50 100644
--- a/include/uapi/linux/kfd_ioctl.h
+++ b/include/uapi/linux/kfd_ioctl.h
@@ -83,11 +83,11 @@ struct kfd_ioctl_set_cu_mask_args {
};
struct kfd_ioctl_get_queue_wave_state_args {
- uint64_t ctl_stack_address; /* to KFD */
- uint32_t ctl_stack_used_size; /* from KFD */
- uint32_t save_area_used_size; /* from KFD */
- uint32_t queue_id; /* to KFD */
- uint32_t pad;
+ __u64 ctl_stack_address; /* to KFD */
+ __u32 ctl_stack_used_size; /* from KFD */
+ __u32 save_area_used_size; /* from KFD */
+ __u32 queue_id; /* to KFD */
+ __u32 pad;
};
/* For kfd_ioctl_set_memory_policy_args.default_policy and alternate_policy */
@@ -255,10 +255,10 @@ struct kfd_hsa_memory_exception_data {
/* hw exception data */
struct kfd_hsa_hw_exception_data {
- uint32_t reset_type;
- uint32_t reset_cause;
- uint32_t memory_lost;
- uint32_t gpu_id;
+ __u32 reset_type;
+ __u32 reset_cause;
+ __u32 memory_lost;
+ __u32 gpu_id;
};
/* Event data */
diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h
index 579974b..7de4f1b 100644
--- a/include/uapi/linux/netfilter/nf_tables.h
+++ b/include/uapi/linux/netfilter/nf_tables.h
@@ -1635,8 +1635,8 @@ enum nft_ng_attributes {
NFTA_NG_MODULUS,
NFTA_NG_TYPE,
NFTA_NG_OFFSET,
- NFTA_NG_SET_NAME,
- NFTA_NG_SET_ID,
+ NFTA_NG_SET_NAME, /* deprecated */
+ NFTA_NG_SET_ID, /* deprecated */
__NFTA_NG_MAX
};
#define NFTA_NG_MAX (__NFTA_NG_MAX - 1)
diff --git a/include/uapi/linux/netfilter_bridge.h b/include/uapi/linux/netfilter_bridge.h
index 156ccd0..1610fdb 100644
--- a/include/uapi/linux/netfilter_bridge.h
+++ b/include/uapi/linux/netfilter_bridge.h
@@ -11,6 +11,10 @@
#include <linux/if_vlan.h>
#include <linux/if_pppox.h>
+#ifndef __KERNEL__
+#include <limits.h> /* for INT_MIN, INT_MAX */
+#endif
+
/* Bridge Hooks */
/* After promisc drops, checksum checks. */
#define NF_BR_PRE_ROUTING 0
diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h
index 34dd3d4..c81feb3 100644
--- a/include/uapi/linux/sctp.h
+++ b/include/uapi/linux/sctp.h
@@ -568,6 +568,8 @@ struct sctp_assoc_reset_event {
#define SCTP_ASSOC_CHANGE_DENIED 0x0004
#define SCTP_ASSOC_CHANGE_FAILED 0x0008
+#define SCTP_STREAM_CHANGE_DENIED SCTP_ASSOC_CHANGE_DENIED
+#define SCTP_STREAM_CHANGE_FAILED SCTP_ASSOC_CHANGE_FAILED
struct sctp_stream_change_event {
__u16 strchange_type;
__u16 strchange_flags;
@@ -1151,6 +1153,7 @@ struct sctp_add_streams {
/* SCTP Stream schedulers */
enum sctp_sched_type {
SCTP_SS_FCFS,
+ SCTP_SS_DEFAULT = SCTP_SS_FCFS,
SCTP_SS_PRIO,
SCTP_SS_RR,
SCTP_SS_MAX = SCTP_SS_RR
diff --git a/include/xen/xen-ops.h b/include/xen/xen-ops.h
index 18803ff..4969817 100644
--- a/include/xen/xen-ops.h
+++ b/include/xen/xen-ops.h
@@ -42,16 +42,12 @@ int xen_setup_shutdown_event(void);
extern unsigned long *xen_contiguous_bitmap;
-#ifdef CONFIG_XEN_PV
+#if defined(CONFIG_XEN_PV) || defined(CONFIG_ARM) || defined(CONFIG_ARM64)
int xen_create_contiguous_region(phys_addr_t pstart, unsigned int order,
unsigned int address_bits,
dma_addr_t *dma_handle);
void xen_destroy_contiguous_region(phys_addr_t pstart, unsigned int order);
-
-int xen_remap_pfn(struct vm_area_struct *vma, unsigned long addr,
- xen_pfn_t *pfn, int nr, int *err_ptr, pgprot_t prot,
- unsigned int domid, bool no_translate, struct page **pages);
#else
static inline int xen_create_contiguous_region(phys_addr_t pstart,
unsigned int order,
@@ -63,7 +59,13 @@ static inline int xen_create_contiguous_region(phys_addr_t pstart,
static inline void xen_destroy_contiguous_region(phys_addr_t pstart,
unsigned int order) { }
+#endif
+#if defined(CONFIG_XEN_PV)
+int xen_remap_pfn(struct vm_area_struct *vma, unsigned long addr,
+ xen_pfn_t *pfn, int nr, int *err_ptr, pgprot_t prot,
+ unsigned int domid, bool no_translate, struct page **pages);
+#else
static inline int xen_remap_pfn(struct vm_area_struct *vma, unsigned long addr,
xen_pfn_t *pfn, int nr, int *err_ptr,
pgprot_t prot, unsigned int domid,
diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index 6377225b..1a796e0 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -553,7 +553,6 @@ bool is_bpf_text_address(unsigned long addr)
int bpf_get_kallsym(unsigned int symnum, unsigned long *value, char *type,
char *sym)
{
- unsigned long symbol_start, symbol_end;
struct bpf_prog_aux *aux;
unsigned int it = 0;
int ret = -ERANGE;
@@ -566,10 +565,9 @@ int bpf_get_kallsym(unsigned int symnum, unsigned long *value, char *type,
if (it++ != symnum)
continue;
- bpf_get_prog_addr_region(aux->prog, &symbol_start, &symbol_end);
bpf_get_prog_name(aux->prog, sym);
- *value = symbol_start;
+ *value = (unsigned long)aux->prog->bpf_func;
*type = BPF_SYM_ELF_TYPE;
ret = 0;
diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index ccb9327..cf5040f 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -2078,6 +2078,7 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
info.jited_prog_len = 0;
info.xlated_prog_len = 0;
info.nr_jited_ksyms = 0;
+ info.nr_jited_func_lens = 0;
goto done;
}
@@ -2158,11 +2159,11 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
}
ulen = info.nr_jited_ksyms;
- info.nr_jited_ksyms = prog->aux->func_cnt;
+ info.nr_jited_ksyms = prog->aux->func_cnt ? : 1;
if (info.nr_jited_ksyms && ulen) {
if (bpf_dump_raw_ok()) {
+ unsigned long ksym_addr;
u64 __user *user_ksyms;
- ulong ksym_addr;
u32 i;
/* copy the address of the kernel symbol
@@ -2170,10 +2171,17 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
*/
ulen = min_t(u32, info.nr_jited_ksyms, ulen);
user_ksyms = u64_to_user_ptr(info.jited_ksyms);
- for (i = 0; i < ulen; i++) {
- ksym_addr = (ulong) prog->aux->func[i]->bpf_func;
- ksym_addr &= PAGE_MASK;
- if (put_user((u64) ksym_addr, &user_ksyms[i]))
+ if (prog->aux->func_cnt) {
+ for (i = 0; i < ulen; i++) {
+ ksym_addr = (unsigned long)
+ prog->aux->func[i]->bpf_func;
+ if (put_user((u64) ksym_addr,
+ &user_ksyms[i]))
+ return -EFAULT;
+ }
+ } else {
+ ksym_addr = (unsigned long) prog->bpf_func;
+ if (put_user((u64) ksym_addr, &user_ksyms[0]))
return -EFAULT;
}
} else {
@@ -2182,7 +2190,7 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
}
ulen = info.nr_jited_func_lens;
- info.nr_jited_func_lens = prog->aux->func_cnt;
+ info.nr_jited_func_lens = prog->aux->func_cnt ? : 1;
if (info.nr_jited_func_lens && ulen) {
if (bpf_dump_raw_ok()) {
u32 __user *user_lens;
@@ -2191,9 +2199,16 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
/* copy the JITed image lengths for each function */
ulen = min_t(u32, info.nr_jited_func_lens, ulen);
user_lens = u64_to_user_ptr(info.jited_func_lens);
- for (i = 0; i < ulen; i++) {
- func_len = prog->aux->func[i]->jited_len;
- if (put_user(func_len, &user_lens[i]))
+ if (prog->aux->func_cnt) {
+ for (i = 0; i < ulen; i++) {
+ func_len =
+ prog->aux->func[i]->jited_len;
+ if (put_user(func_len, &user_lens[i]))
+ return -EFAULT;
+ }
+ } else {
+ func_len = prog->jited_len;
+ if (put_user(func_len, &user_lens[0]))
return -EFAULT;
}
} else {
diff --git a/kernel/resource.c b/kernel/resource.c
index b3a3a1f..b0fbf68 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -319,16 +319,23 @@ int release_resource(struct resource *old)
EXPORT_SYMBOL(release_resource);
/**
- * Finds the lowest iomem resource that covers part of [start..end]. The
- * caller must specify start, end, flags, and desc (which may be
+ * Finds the lowest iomem resource that covers part of [@start..@end]. The
+ * caller must specify @start, @end, @flags, and @desc (which may be
* IORES_DESC_NONE).
*
- * If a resource is found, returns 0 and *res is overwritten with the part
- * of the resource that's within [start..end]; if none is found, returns
- * -1.
+ * If a resource is found, returns 0 and @*res is overwritten with the part
+ * of the resource that's within [@start..@end]; if none is found, returns
+ * -1 or -EINVAL for other invalid parameters.
*
* This function walks the whole tree and not just first level children
* unless @first_lvl is true.
+ *
+ * @start: start address of the resource searched for
+ * @end: end address of same resource
+ * @flags: flags which the resource must have
+ * @desc: descriptor the resource must have
+ * @first_lvl: walk only the first level children, if set
+ * @res: return ptr, if resource found
*/
static int find_next_iomem_res(resource_size_t start, resource_size_t end,
unsigned long flags, unsigned long desc,
@@ -399,6 +406,8 @@ static int __walk_iomem_res_desc(resource_size_t start, resource_size_t end,
* @flags: I/O resource flags
* @start: start addr
* @end: end addr
+ * @arg: function argument for the callback @func
+ * @func: callback function that is called for each qualifying resource area
*
* NOTE: For a new descriptor search, define a new IORES_DESC in
* <linux/ioport.h> and set it in 'desc' of a target resource entry.
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index f12225f..091e089 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -5851,11 +5851,14 @@ void __init sched_init_smp(void)
/*
* There's no userspace yet to cause hotplug operations; hence all the
* CPU masks are stable and all blatant races in the below code cannot
- * happen.
+ * happen. The hotplug lock is nevertheless taken to satisfy lockdep,
+ * but there won't be any contention on it.
*/
+ cpus_read_lock();
mutex_lock(&sched_domains_mutex);
sched_init_domains(cpu_active_mask);
mutex_unlock(&sched_domains_mutex);
+ cpus_read_unlock();
/* Move init over to a non-isolated CPU */
if (set_cpus_allowed_ptr(current, housekeeping_cpumask(HK_FLAG_DOMAIN)) < 0)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index ee271bb..3648d03 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -2400,8 +2400,8 @@ void task_numa_fault(int last_cpupid, int mem_node, int pages, int flags)
local = 1;
/*
- * Retry task to preferred node migration periodically, in case it
- * case it previously failed, or the scheduler moved us.
+ * Retry to migrate task to preferred node periodically, in case it
+ * previously failed, or the scheduler moved us.
*/
if (time_after(jiffies, p->numa_migrate_retry)) {
task_numa_placement(p);
diff --git a/kernel/time/posix-cpu-timers.c b/kernel/time/posix-cpu-timers.c
index ce32cf7..8f0644af 100644
--- a/kernel/time/posix-cpu-timers.c
+++ b/kernel/time/posix-cpu-timers.c
@@ -917,9 +917,6 @@ static void check_process_timers(struct task_struct *tsk,
struct task_cputime cputime;
unsigned long soft;
- if (dl_task(tsk))
- check_dl_overrun(tsk);
-
/*
* If cputimer is not running, then there are no active
* process wide timers (POSIX 1.b, itimers, RLIMIT_CPU).
diff --git a/kernel/trace/trace_probe.c b/kernel/trace/trace_probe.c
index 3ef15a6..bd30e93 100644
--- a/kernel/trace/trace_probe.c
+++ b/kernel/trace/trace_probe.c
@@ -535,7 +535,7 @@ int traceprobe_update_arg(struct probe_arg *arg)
if (code[1].op != FETCH_OP_IMM)
return -EINVAL;
- tmp = strpbrk("+-", code->data);
+ tmp = strpbrk(code->data, "+-");
if (tmp)
c = *tmp;
ret = traceprobe_split_symbol_offset(code->data,
diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c
index e5222b5..923414a 100644
--- a/kernel/user_namespace.c
+++ b/kernel/user_namespace.c
@@ -974,10 +974,6 @@ static ssize_t map_write(struct file *file, const char __user *buf,
if (!new_idmap_permitted(file, ns, cap_setid, &new_map))
goto out;
- ret = sort_idmaps(&new_map);
- if (ret < 0)
- goto out;
-
ret = -EPERM;
/* Map the lower ids from the parent user namespace to the
* kernel global id space.
@@ -1004,6 +1000,14 @@ static ssize_t map_write(struct file *file, const char __user *buf,
e->lower_first = lower_first;
}
+ /*
+ * If we want to use binary search for lookup, this clones the extent
+ * array and sorts both copies.
+ */
+ ret = sort_idmaps(&new_map);
+ if (ret < 0)
+ goto out;
+
/* Install the map */
if (new_map.nr_extents <= UID_GID_MAP_MAX_BASE_EXTENTS) {
memcpy(map->extent, new_map.extent,
diff --git a/lib/raid6/test/Makefile b/lib/raid6/test/Makefile
index 5d73f5c..79777645 100644
--- a/lib/raid6/test/Makefile
+++ b/lib/raid6/test/Makefile
@@ -27,7 +27,7 @@
CFLAGS += -I../../../arch/arm/include -mfpu=neon
HAS_NEON = yes
endif
-ifeq ($(ARCH),arm64)
+ifeq ($(ARCH),aarch64)
CFLAGS += -I../../../arch/arm64/include
HAS_NEON = yes
endif
@@ -41,7 +41,7 @@
gcc -c -x assembler - >&/dev/null && \
rm ./-.o && echo -DCONFIG_AS_AVX512=1)
else ifeq ($(HAS_NEON),yes)
- OBJS += neon.o neon1.o neon2.o neon4.o neon8.o
+ OBJS += neon.o neon1.o neon2.o neon4.o neon8.o recov_neon.o recov_neon_inner.o
CFLAGS += -DCONFIG_KERNEL_MODE_NEON=1
else
HAS_ALTIVEC := $(shell printf '\#include <altivec.h>\nvector int a;\n' |\
diff --git a/net/core/dev.c b/net/core/dev.c
index 77d43ae..0ffcbdd 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3272,7 +3272,7 @@ struct sk_buff *dev_hard_start_xmit(struct sk_buff *first, struct net_device *de
}
skb = next;
- if (netif_xmit_stopped(txq) && skb) {
+ if (netif_tx_queue_stopped(txq) && skb) {
rc = NETDEV_TX_BUSY;
break;
}
diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c
index 676f3ad..588f475 100644
--- a/net/core/flow_dissector.c
+++ b/net/core/flow_dissector.c
@@ -1166,8 +1166,8 @@ bool __skb_flow_dissect(const struct sk_buff *skb,
break;
}
- if (dissector_uses_key(flow_dissector,
- FLOW_DISSECTOR_KEY_PORTS)) {
+ if (dissector_uses_key(flow_dissector, FLOW_DISSECTOR_KEY_PORTS) &&
+ !(key_control->flags & FLOW_DIS_IS_FRAGMENT)) {
key_ports = skb_flow_dissector_target(flow_dissector,
FLOW_DISSECTOR_KEY_PORTS,
target_container);
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 5da9552..2b9fdbc 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -717,7 +717,8 @@ int netpoll_setup(struct netpoll *np)
read_lock_bh(&idev->lock);
list_for_each_entry(ifp, &idev->addr_list, if_list) {
- if (ipv6_addr_type(&ifp->addr) & IPV6_ADDR_LINKLOCAL)
+ if (!!(ipv6_addr_type(&ifp->addr) & IPV6_ADDR_LINKLOCAL) !=
+ !!(ipv6_addr_type(&np->remote_ip.in6) & IPV6_ADDR_LINKLOCAL))
continue;
np->local_ip.in6 = ifp->addr;
err = 0;
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index e01274b..33d9227 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -3367,7 +3367,7 @@ static int rtnl_dump_all(struct sk_buff *skb, struct netlink_callback *cb)
cb->seq = 0;
}
ret = dumpit(skb, cb);
- if (ret < 0)
+ if (ret)
break;
}
cb->family = idx;
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 946de0e..b4ee5c8 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -4944,6 +4944,8 @@ static unsigned int skb_gso_mac_seglen(const struct sk_buff *skb)
*
* This is a helper to do that correctly considering GSO_BY_FRAGS.
*
+ * @skb: GSO skb
+ *
* @seg_len: The segmented length (from skb_gso_*_seglen). In the
* GSO_BY_FRAGS case this will be [header sizes + GSO_BY_FRAGS].
*
diff --git a/net/core/sock.c b/net/core/sock.c
index 6fcc4bc..080a880 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -3279,6 +3279,7 @@ int sock_load_diag_module(int family, int protocol)
#ifdef CONFIG_INET
if (family == AF_INET &&
+ protocol != IPPROTO_RAW &&
!rcu_access_pointer(inet_protos[protocol]))
return -ENOENT;
#endif
diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c
index bcb11f3..760a9e5 100644
--- a/net/ipv4/inet_fragment.c
+++ b/net/ipv4/inet_fragment.c
@@ -178,21 +178,22 @@ static struct inet_frag_queue *inet_frag_alloc(struct netns_frags *nf,
}
static struct inet_frag_queue *inet_frag_create(struct netns_frags *nf,
- void *arg)
+ void *arg,
+ struct inet_frag_queue **prev)
{
struct inet_frags *f = nf->f;
struct inet_frag_queue *q;
- int err;
q = inet_frag_alloc(nf, f, arg);
- if (!q)
+ if (!q) {
+ *prev = ERR_PTR(-ENOMEM);
return NULL;
-
+ }
mod_timer(&q->timer, jiffies + nf->timeout);
- err = rhashtable_insert_fast(&nf->rhashtable, &q->node,
- f->rhash_params);
- if (err < 0) {
+ *prev = rhashtable_lookup_get_insert_key(&nf->rhashtable, &q->key,
+ &q->node, f->rhash_params);
+ if (*prev) {
q->flags |= INET_FRAG_COMPLETE;
inet_frag_kill(q);
inet_frag_destroy(q);
@@ -204,22 +205,22 @@ static struct inet_frag_queue *inet_frag_create(struct netns_frags *nf,
/* TODO : call from rcu_read_lock() and no longer use refcount_inc_not_zero() */
struct inet_frag_queue *inet_frag_find(struct netns_frags *nf, void *key)
{
- struct inet_frag_queue *fq;
+ struct inet_frag_queue *fq = NULL, *prev;
if (!nf->high_thresh || frag_mem_limit(nf) > nf->high_thresh)
return NULL;
rcu_read_lock();
- fq = rhashtable_lookup(&nf->rhashtable, key, nf->f->rhash_params);
- if (fq) {
+ prev = rhashtable_lookup(&nf->rhashtable, key, nf->f->rhash_params);
+ if (!prev)
+ fq = inet_frag_create(nf, key, &prev);
+ if (prev && !IS_ERR(prev)) {
+ fq = prev;
if (!refcount_inc_not_zero(&fq->refcnt))
fq = NULL;
- rcu_read_unlock();
- return fq;
}
rcu_read_unlock();
-
- return inet_frag_create(nf, key);
+ return fq;
}
EXPORT_SYMBOL(inet_frag_find);
diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c
index 9b0158f..d6ee343 100644
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -722,10 +722,14 @@ struct sk_buff *ip_check_defrag(struct net *net, struct sk_buff *skb, u32 user)
if (ip_is_fragment(&iph)) {
skb = skb_share_check(skb, GFP_ATOMIC);
if (skb) {
- if (!pskb_may_pull(skb, netoff + iph.ihl * 4))
- return skb;
- if (pskb_trim_rcsum(skb, netoff + len))
- return skb;
+ if (!pskb_may_pull(skb, netoff + iph.ihl * 4)) {
+ kfree_skb(skb);
+ return NULL;
+ }
+ if (pskb_trim_rcsum(skb, netoff + len)) {
+ kfree_skb(skb);
+ return NULL;
+ }
memset(IPCB(skb), 0, sizeof(struct inet_skb_parm));
if (ip_defrag(net, skb, user))
return NULL;
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index 26c36cc..fffcc13 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -1246,7 +1246,7 @@ int ip_setsockopt(struct sock *sk, int level,
return -ENOPROTOOPT;
err = do_ip_setsockopt(sk, level, optname, optval, optlen);
-#ifdef CONFIG_BPFILTER
+#if IS_ENABLED(CONFIG_BPFILTER_UMH)
if (optname >= BPFILTER_IPT_SO_SET_REPLACE &&
optname < BPFILTER_IPT_SET_MAX)
err = bpfilter_ip_set_sockopt(sk, optname, optval, optlen);
@@ -1559,7 +1559,7 @@ int ip_getsockopt(struct sock *sk, int level,
int err;
err = do_ip_getsockopt(sk, level, optname, optval, optlen, 0);
-#ifdef CONFIG_BPFILTER
+#if IS_ENABLED(CONFIG_BPFILTER_UMH)
if (optname >= BPFILTER_IPT_SO_GET_INFO &&
optname < BPFILTER_IPT_GET_MAX)
err = bpfilter_ip_get_sockopt(sk, optname, optval, optlen);
@@ -1596,7 +1596,7 @@ int compat_ip_getsockopt(struct sock *sk, int level, int optname,
err = do_ip_getsockopt(sk, level, optname, optval, optlen,
MSG_CMSG_COMPAT);
-#ifdef CONFIG_BPFILTER
+#if IS_ENABLED(CONFIG_BPFILTER_UMH)
if (optname >= BPFILTER_IPT_SO_GET_INFO &&
optname < BPFILTER_IPT_GET_MAX)
err = bpfilter_ip_get_sockopt(sk, optname, optval, optlen);
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 3f4d610..f0cd291 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -1001,6 +1001,9 @@ static int __init inet6_init(void)
err = ip6_flowlabel_init();
if (err)
goto ip6_flowlabel_fail;
+ err = ipv6_anycast_init();
+ if (err)
+ goto ipv6_anycast_fail;
err = addrconf_init();
if (err)
goto addrconf_fail;
@@ -1091,6 +1094,8 @@ static int __init inet6_init(void)
ipv6_exthdrs_fail:
addrconf_cleanup();
addrconf_fail:
+ ipv6_anycast_cleanup();
+ipv6_anycast_fail:
ip6_flowlabel_cleanup();
ip6_flowlabel_fail:
ndisc_late_cleanup();
diff --git a/net/ipv6/anycast.c b/net/ipv6/anycast.c
index 4e0ff703..9499905 100644
--- a/net/ipv6/anycast.c
+++ b/net/ipv6/anycast.c
@@ -44,8 +44,22 @@
#include <net/checksum.h>
+#define IN6_ADDR_HSIZE_SHIFT 8
+#define IN6_ADDR_HSIZE BIT(IN6_ADDR_HSIZE_SHIFT)
+/* anycast address hash table
+ */
+static struct hlist_head inet6_acaddr_lst[IN6_ADDR_HSIZE];
+static DEFINE_SPINLOCK(acaddr_hash_lock);
+
static int ipv6_dev_ac_dec(struct net_device *dev, const struct in6_addr *addr);
+static u32 inet6_acaddr_hash(struct net *net, const struct in6_addr *addr)
+{
+ u32 val = ipv6_addr_hash(addr) ^ net_hash_mix(net);
+
+ return hash_32(val, IN6_ADDR_HSIZE_SHIFT);
+}
+
/*
* socket join an anycast group
*/
@@ -204,16 +218,39 @@ void ipv6_sock_ac_close(struct sock *sk)
rtnl_unlock();
}
+static void ipv6_add_acaddr_hash(struct net *net, struct ifacaddr6 *aca)
+{
+ unsigned int hash = inet6_acaddr_hash(net, &aca->aca_addr);
+
+ spin_lock(&acaddr_hash_lock);
+ hlist_add_head_rcu(&aca->aca_addr_lst, &inet6_acaddr_lst[hash]);
+ spin_unlock(&acaddr_hash_lock);
+}
+
+static void ipv6_del_acaddr_hash(struct ifacaddr6 *aca)
+{
+ spin_lock(&acaddr_hash_lock);
+ hlist_del_init_rcu(&aca->aca_addr_lst);
+ spin_unlock(&acaddr_hash_lock);
+}
+
static void aca_get(struct ifacaddr6 *aca)
{
refcount_inc(&aca->aca_refcnt);
}
+static void aca_free_rcu(struct rcu_head *h)
+{
+ struct ifacaddr6 *aca = container_of(h, struct ifacaddr6, rcu);
+
+ fib6_info_release(aca->aca_rt);
+ kfree(aca);
+}
+
static void aca_put(struct ifacaddr6 *ac)
{
if (refcount_dec_and_test(&ac->aca_refcnt)) {
- fib6_info_release(ac->aca_rt);
- kfree(ac);
+ call_rcu(&ac->rcu, aca_free_rcu);
}
}
@@ -229,6 +266,7 @@ static struct ifacaddr6 *aca_alloc(struct fib6_info *f6i,
aca->aca_addr = *addr;
fib6_info_hold(f6i);
aca->aca_rt = f6i;
+ INIT_HLIST_NODE(&aca->aca_addr_lst);
aca->aca_users = 1;
/* aca_tstamp should be updated upon changes */
aca->aca_cstamp = aca->aca_tstamp = jiffies;
@@ -285,6 +323,8 @@ int __ipv6_dev_ac_inc(struct inet6_dev *idev, const struct in6_addr *addr)
aca_get(aca);
write_unlock_bh(&idev->lock);
+ ipv6_add_acaddr_hash(net, aca);
+
ip6_ins_rt(net, f6i);
addrconf_join_solict(idev->dev, &aca->aca_addr);
@@ -325,6 +365,7 @@ int __ipv6_dev_ac_dec(struct inet6_dev *idev, const struct in6_addr *addr)
else
idev->ac_list = aca->aca_next;
write_unlock_bh(&idev->lock);
+ ipv6_del_acaddr_hash(aca);
addrconf_leave_solict(idev, &aca->aca_addr);
ip6_del_rt(dev_net(idev->dev), aca->aca_rt);
@@ -352,6 +393,8 @@ void ipv6_ac_destroy_dev(struct inet6_dev *idev)
idev->ac_list = aca->aca_next;
write_unlock_bh(&idev->lock);
+ ipv6_del_acaddr_hash(aca);
+
addrconf_leave_solict(idev, &aca->aca_addr);
ip6_del_rt(dev_net(idev->dev), aca->aca_rt);
@@ -390,17 +433,25 @@ static bool ipv6_chk_acast_dev(struct net_device *dev, const struct in6_addr *ad
bool ipv6_chk_acast_addr(struct net *net, struct net_device *dev,
const struct in6_addr *addr)
{
+ unsigned int hash = inet6_acaddr_hash(net, addr);
+ struct net_device *nh_dev;
+ struct ifacaddr6 *aca;
bool found = false;
rcu_read_lock();
if (dev)
found = ipv6_chk_acast_dev(dev, addr);
else
- for_each_netdev_rcu(net, dev)
- if (ipv6_chk_acast_dev(dev, addr)) {
+ hlist_for_each_entry_rcu(aca, &inet6_acaddr_lst[hash],
+ aca_addr_lst) {
+ nh_dev = fib6_info_nh_dev(aca->aca_rt);
+ if (!nh_dev || !net_eq(dev_net(nh_dev), net))
+ continue;
+ if (ipv6_addr_equal(&aca->aca_addr, addr)) {
found = true;
break;
}
+ }
rcu_read_unlock();
return found;
}
@@ -540,3 +591,24 @@ void ac6_proc_exit(struct net *net)
remove_proc_entry("anycast6", net->proc_net);
}
#endif
+
+/* Init / cleanup code
+ */
+int __init ipv6_anycast_init(void)
+{
+ int i;
+
+ for (i = 0; i < IN6_ADDR_HSIZE; i++)
+ INIT_HLIST_HEAD(&inet6_acaddr_lst[i]);
+ return 0;
+}
+
+void ipv6_anycast_cleanup(void)
+{
+ int i;
+
+ spin_lock(&acaddr_hash_lock);
+ for (i = 0; i < IN6_ADDR_HSIZE; i++)
+ WARN_ON(!hlist_empty(&inet6_acaddr_lst[i]));
+ spin_unlock(&acaddr_hash_lock);
+}
diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index 1b8bc00..ae37861 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -591,7 +591,7 @@ static int inet6_dump_fib(struct sk_buff *skb, struct netlink_callback *cb)
/* fib entries are never clones */
if (arg.filter.flags & RTM_F_CLONED)
- return skb->len;
+ goto out;
w = (void *)cb->args[2];
if (!w) {
@@ -621,7 +621,7 @@ static int inet6_dump_fib(struct sk_buff *skb, struct netlink_callback *cb)
tb = fib6_get_table(net, arg.filter.table_id);
if (!tb) {
if (arg.filter.dump_all_families)
- return skb->len;
+ goto out;
NL_SET_ERR_MSG_MOD(cb->extack, "FIB table does not exist");
return -ENOENT;
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index b8ac369..d219979 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -587,11 +587,16 @@ int nf_ct_frag6_gather(struct net *net, struct sk_buff *skb, u32 user)
*/
ret = -EINPROGRESS;
if (fq->q.flags == (INET_FRAG_FIRST_IN | INET_FRAG_LAST_IN) &&
- fq->q.meat == fq->q.len &&
- nf_ct_frag6_reasm(fq, skb, dev))
- ret = 0;
- else
+ fq->q.meat == fq->q.len) {
+ unsigned long orefdst = skb->_skb_refdst;
+
+ skb->_skb_refdst = 0UL;
+ if (nf_ct_frag6_reasm(fq, skb, dev))
+ ret = 0;
+ skb->_skb_refdst = orefdst;
+ } else {
skb_dst_drop(skb);
+ }
out_unlock:
spin_unlock_bh(&fq->q.lock);
diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c
index bc4bd247..1577f2f 100644
--- a/net/netfilter/ipset/ip_set_core.c
+++ b/net/netfilter/ipset/ip_set_core.c
@@ -55,11 +55,15 @@ MODULE_AUTHOR("Jozsef Kadlecsik <[email protected]>");
MODULE_DESCRIPTION("core IP set support");
MODULE_ALIAS_NFNL_SUBSYS(NFNL_SUBSYS_IPSET);
-/* When the nfnl mutex is held: */
+/* When the nfnl mutex or ip_set_ref_lock is held: */
#define ip_set_dereference(p) \
- rcu_dereference_protected(p, lockdep_nfnl_is_held(NFNL_SUBSYS_IPSET))
+ rcu_dereference_protected(p, \
+ lockdep_nfnl_is_held(NFNL_SUBSYS_IPSET) || \
+ lockdep_is_held(&ip_set_ref_lock))
#define ip_set(inst, id) \
ip_set_dereference((inst)->ip_set_list)[id]
+#define ip_set_ref_netlink(inst,id) \
+ rcu_dereference_raw((inst)->ip_set_list)[id]
/* The set types are implemented in modules and registered set types
* can be found in ip_set_type_list. Adding/deleting types is
@@ -693,21 +697,20 @@ ip_set_put_byindex(struct net *net, ip_set_id_t index)
EXPORT_SYMBOL_GPL(ip_set_put_byindex);
/* Get the name of a set behind a set index.
- * We assume the set is referenced, so it does exist and
- * can't be destroyed. The set cannot be renamed due to
- * the referencing either.
- *
+ * Set itself is protected by RCU, but its name isn't: to protect against
+ * renaming, grab ip_set_ref_lock as reader (see ip_set_rename()) and copy the
+ * name.
*/
-const char *
-ip_set_name_byindex(struct net *net, ip_set_id_t index)
+void
+ip_set_name_byindex(struct net *net, ip_set_id_t index, char *name)
{
- const struct ip_set *set = ip_set_rcu_get(net, index);
+ struct ip_set *set = ip_set_rcu_get(net, index);
BUG_ON(!set);
- BUG_ON(set->ref == 0);
- /* Referenced, so it's safe */
- return set->name;
+ read_lock_bh(&ip_set_ref_lock);
+ strncpy(name, set->name, IPSET_MAXNAMELEN);
+ read_unlock_bh(&ip_set_ref_lock);
}
EXPORT_SYMBOL_GPL(ip_set_name_byindex);
@@ -961,7 +964,7 @@ static int ip_set_create(struct net *net, struct sock *ctnl,
/* Wraparound */
goto cleanup;
- list = kcalloc(i, sizeof(struct ip_set *), GFP_KERNEL);
+ list = kvcalloc(i, sizeof(struct ip_set *), GFP_KERNEL);
if (!list)
goto cleanup;
/* nfnl mutex is held, both lists are valid */
@@ -973,7 +976,7 @@ static int ip_set_create(struct net *net, struct sock *ctnl,
/* Use new list */
index = inst->ip_set_max;
inst->ip_set_max = i;
- kfree(tmp);
+ kvfree(tmp);
ret = 0;
} else if (ret) {
goto cleanup;
@@ -1153,7 +1156,7 @@ static int ip_set_rename(struct net *net, struct sock *ctnl,
if (!set)
return -ENOENT;
- read_lock_bh(&ip_set_ref_lock);
+ write_lock_bh(&ip_set_ref_lock);
if (set->ref != 0) {
ret = -IPSET_ERR_REFERENCED;
goto out;
@@ -1170,7 +1173,7 @@ static int ip_set_rename(struct net *net, struct sock *ctnl,
strncpy(set->name, name2, IPSET_MAXNAMELEN);
out:
- read_unlock_bh(&ip_set_ref_lock);
+ write_unlock_bh(&ip_set_ref_lock);
return ret;
}
@@ -1252,7 +1255,7 @@ ip_set_dump_done(struct netlink_callback *cb)
struct ip_set_net *inst =
(struct ip_set_net *)cb->args[IPSET_CB_NET];
ip_set_id_t index = (ip_set_id_t)cb->args[IPSET_CB_INDEX];
- struct ip_set *set = ip_set(inst, index);
+ struct ip_set *set = ip_set_ref_netlink(inst, index);
if (set->variant->uref)
set->variant->uref(set, cb, false);
@@ -1441,7 +1444,7 @@ ip_set_dump_start(struct sk_buff *skb, struct netlink_callback *cb)
release_refcount:
/* If there was an error or set is done, release set */
if (ret || !cb->args[IPSET_CB_ARG0]) {
- set = ip_set(inst, index);
+ set = ip_set_ref_netlink(inst, index);
if (set->variant->uref)
set->variant->uref(set, cb, false);
pr_debug("release set %s\n", set->name);
@@ -2059,7 +2062,7 @@ ip_set_net_init(struct net *net)
if (inst->ip_set_max >= IPSET_INVALID_ID)
inst->ip_set_max = IPSET_INVALID_ID - 1;
- list = kcalloc(inst->ip_set_max, sizeof(struct ip_set *), GFP_KERNEL);
+ list = kvcalloc(inst->ip_set_max, sizeof(struct ip_set *), GFP_KERNEL);
if (!list)
return -ENOMEM;
inst->is_deleted = false;
@@ -2087,7 +2090,7 @@ ip_set_net_exit(struct net *net)
}
}
nfnl_unlock(NFNL_SUBSYS_IPSET);
- kfree(rcu_dereference_protected(inst->ip_set_list, 1));
+ kvfree(rcu_dereference_protected(inst->ip_set_list, 1));
}
static struct pernet_operations ip_set_net_ops = {
diff --git a/net/netfilter/ipset/ip_set_hash_netportnet.c b/net/netfilter/ipset/ip_set_hash_netportnet.c
index d391485..613e18e 100644
--- a/net/netfilter/ipset/ip_set_hash_netportnet.c
+++ b/net/netfilter/ipset/ip_set_hash_netportnet.c
@@ -213,13 +213,13 @@ hash_netportnet4_uadt(struct ip_set *set, struct nlattr *tb[],
if (tb[IPSET_ATTR_CIDR]) {
e.cidr[0] = nla_get_u8(tb[IPSET_ATTR_CIDR]);
- if (!e.cidr[0] || e.cidr[0] > HOST_MASK)
+ if (e.cidr[0] > HOST_MASK)
return -IPSET_ERR_INVALID_CIDR;
}
if (tb[IPSET_ATTR_CIDR2]) {
e.cidr[1] = nla_get_u8(tb[IPSET_ATTR_CIDR2]);
- if (!e.cidr[1] || e.cidr[1] > HOST_MASK)
+ if (e.cidr[1] > HOST_MASK)
return -IPSET_ERR_INVALID_CIDR;
}
@@ -493,13 +493,13 @@ hash_netportnet6_uadt(struct ip_set *set, struct nlattr *tb[],
if (tb[IPSET_ATTR_CIDR]) {
e.cidr[0] = nla_get_u8(tb[IPSET_ATTR_CIDR]);
- if (!e.cidr[0] || e.cidr[0] > HOST_MASK)
+ if (e.cidr[0] > HOST_MASK)
return -IPSET_ERR_INVALID_CIDR;
}
if (tb[IPSET_ATTR_CIDR2]) {
e.cidr[1] = nla_get_u8(tb[IPSET_ATTR_CIDR2]);
- if (!e.cidr[1] || e.cidr[1] > HOST_MASK)
+ if (e.cidr[1] > HOST_MASK)
return -IPSET_ERR_INVALID_CIDR;
}
diff --git a/net/netfilter/ipset/ip_set_list_set.c b/net/netfilter/ipset/ip_set_list_set.c
index 072a658..4eef55d 100644
--- a/net/netfilter/ipset/ip_set_list_set.c
+++ b/net/netfilter/ipset/ip_set_list_set.c
@@ -148,9 +148,7 @@ __list_set_del_rcu(struct rcu_head * rcu)
{
struct set_elem *e = container_of(rcu, struct set_elem, rcu);
struct ip_set *set = e->set;
- struct list_set *map = set->data;
- ip_set_put_byindex(map->net, e->id);
ip_set_ext_destroy(set, e);
kfree(e);
}
@@ -158,15 +156,21 @@ __list_set_del_rcu(struct rcu_head * rcu)
static inline void
list_set_del(struct ip_set *set, struct set_elem *e)
{
+ struct list_set *map = set->data;
+
set->elements--;
list_del_rcu(&e->list);
+ ip_set_put_byindex(map->net, e->id);
call_rcu(&e->rcu, __list_set_del_rcu);
}
static inline void
-list_set_replace(struct set_elem *e, struct set_elem *old)
+list_set_replace(struct ip_set *set, struct set_elem *e, struct set_elem *old)
{
+ struct list_set *map = set->data;
+
list_replace_rcu(&old->list, &e->list);
+ ip_set_put_byindex(map->net, old->id);
call_rcu(&old->rcu, __list_set_del_rcu);
}
@@ -298,7 +302,7 @@ list_set_uadd(struct ip_set *set, void *value, const struct ip_set_ext *ext,
INIT_LIST_HEAD(&e->list);
list_set_init_extensions(set, ext, e);
if (n)
- list_set_replace(e, n);
+ list_set_replace(set, e, n);
else if (next)
list_add_tail_rcu(&e->list, &next->list);
else if (prev)
@@ -486,6 +490,7 @@ list_set_list(const struct ip_set *set,
const struct list_set *map = set->data;
struct nlattr *atd, *nested;
u32 i = 0, first = cb->args[IPSET_CB_ARG0];
+ char name[IPSET_MAXNAMELEN];
struct set_elem *e;
int ret = 0;
@@ -504,8 +509,8 @@ list_set_list(const struct ip_set *set,
nested = ipset_nest_start(skb, IPSET_ATTR_DATA);
if (!nested)
goto nla_put_failure;
- if (nla_put_string(skb, IPSET_ATTR_NAME,
- ip_set_name_byindex(map->net, e->id)))
+ ip_set_name_byindex(map->net, e->id, name);
+ if (nla_put_string(skb, IPSET_ATTR_NAME, name))
goto nla_put_failure;
if (ip_set_put_extensions(skb, set, e, true))
goto nla_put_failure;
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index ca1168d..e92e749 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -1073,19 +1073,22 @@ static unsigned int early_drop_list(struct net *net,
return drops;
}
-static noinline int early_drop(struct net *net, unsigned int _hash)
+static noinline int early_drop(struct net *net, unsigned int hash)
{
- unsigned int i;
+ unsigned int i, bucket;
for (i = 0; i < NF_CT_EVICTION_RANGE; i++) {
struct hlist_nulls_head *ct_hash;
- unsigned int hash, hsize, drops;
+ unsigned int hsize, drops;
rcu_read_lock();
nf_conntrack_get_ht(&ct_hash, &hsize);
- hash = reciprocal_scale(_hash++, hsize);
+ if (!i)
+ bucket = reciprocal_scale(hash, hsize);
+ else
+ bucket = (bucket + 1) % hsize;
- drops = early_drop_list(net, &ct_hash[hash]);
+ drops = early_drop_list(net, &ct_hash[bucket]);
rcu_read_unlock();
if (drops) {
diff --git a/net/netfilter/nf_conntrack_proto_dccp.c b/net/netfilter/nf_conntrack_proto_dccp.c
index 171e9e12..023c144 100644
--- a/net/netfilter/nf_conntrack_proto_dccp.c
+++ b/net/netfilter/nf_conntrack_proto_dccp.c
@@ -384,11 +384,6 @@ dccp_state_table[CT_DCCP_ROLE_MAX + 1][DCCP_PKT_SYNCACK + 1][CT_DCCP_MAX + 1] =
},
};
-static inline struct nf_dccp_net *dccp_pernet(struct net *net)
-{
- return &net->ct.nf_ct_proto.dccp;
-}
-
static noinline bool
dccp_new(struct nf_conn *ct, const struct sk_buff *skb,
const struct dccp_hdr *dh)
@@ -401,7 +396,7 @@ dccp_new(struct nf_conn *ct, const struct sk_buff *skb,
state = dccp_state_table[CT_DCCP_ROLE_CLIENT][dh->dccph_type][CT_DCCP_NONE];
switch (state) {
default:
- dn = dccp_pernet(net);
+ dn = nf_dccp_pernet(net);
if (dn->dccp_loose == 0) {
msg = "not picking up existing connection ";
goto out_invalid;
@@ -568,7 +563,7 @@ static int dccp_packet(struct nf_conn *ct, struct sk_buff *skb,
timeouts = nf_ct_timeout_lookup(ct);
if (!timeouts)
- timeouts = dccp_pernet(nf_ct_net(ct))->dccp_timeout;
+ timeouts = nf_dccp_pernet(nf_ct_net(ct))->dccp_timeout;
nf_ct_refresh_acct(ct, ctinfo, skb, timeouts[new_state]);
return NF_ACCEPT;
@@ -681,7 +676,7 @@ static int nlattr_to_dccp(struct nlattr *cda[], struct nf_conn *ct)
static int dccp_timeout_nlattr_to_obj(struct nlattr *tb[],
struct net *net, void *data)
{
- struct nf_dccp_net *dn = dccp_pernet(net);
+ struct nf_dccp_net *dn = nf_dccp_pernet(net);
unsigned int *timeouts = data;
int i;
@@ -814,7 +809,7 @@ static int dccp_kmemdup_sysctl_table(struct net *net, struct nf_proto_net *pn,
static int dccp_init_net(struct net *net)
{
- struct nf_dccp_net *dn = dccp_pernet(net);
+ struct nf_dccp_net *dn = nf_dccp_pernet(net);
struct nf_proto_net *pn = &dn->pn;
if (!pn->users) {
diff --git a/net/netfilter/nf_conntrack_proto_generic.c b/net/netfilter/nf_conntrack_proto_generic.c
index e10e867..5da19d5 100644
--- a/net/netfilter/nf_conntrack_proto_generic.c
+++ b/net/netfilter/nf_conntrack_proto_generic.c
@@ -27,11 +27,6 @@ static bool nf_generic_should_process(u8 proto)
}
}
-static inline struct nf_generic_net *generic_pernet(struct net *net)
-{
- return &net->ct.nf_ct_proto.generic;
-}
-
static bool generic_pkt_to_tuple(const struct sk_buff *skb,
unsigned int dataoff,
struct net *net, struct nf_conntrack_tuple *tuple)
@@ -58,7 +53,7 @@ static int generic_packet(struct nf_conn *ct,
}
if (!timeout)
- timeout = &generic_pernet(nf_ct_net(ct))->timeout;
+ timeout = &nf_generic_pernet(nf_ct_net(ct))->timeout;
nf_ct_refresh_acct(ct, ctinfo, skb, *timeout);
return NF_ACCEPT;
@@ -72,7 +67,7 @@ static int generic_packet(struct nf_conn *ct,
static int generic_timeout_nlattr_to_obj(struct nlattr *tb[],
struct net *net, void *data)
{
- struct nf_generic_net *gn = generic_pernet(net);
+ struct nf_generic_net *gn = nf_generic_pernet(net);
unsigned int *timeout = data;
if (!timeout)
@@ -138,7 +133,7 @@ static int generic_kmemdup_sysctl_table(struct nf_proto_net *pn,
static int generic_init_net(struct net *net)
{
- struct nf_generic_net *gn = generic_pernet(net);
+ struct nf_generic_net *gn = nf_generic_pernet(net);
struct nf_proto_net *pn = &gn->pn;
gn->timeout = nf_ct_generic_timeout;
diff --git a/net/netfilter/nf_conntrack_proto_icmp.c b/net/netfilter/nf_conntrack_proto_icmp.c
index 3598520..de64d8a 100644
--- a/net/netfilter/nf_conntrack_proto_icmp.c
+++ b/net/netfilter/nf_conntrack_proto_icmp.c
@@ -25,11 +25,6 @@
static const unsigned int nf_ct_icmp_timeout = 30*HZ;
-static inline struct nf_icmp_net *icmp_pernet(struct net *net)
-{
- return &net->ct.nf_ct_proto.icmp;
-}
-
static bool icmp_pkt_to_tuple(const struct sk_buff *skb, unsigned int dataoff,
struct net *net, struct nf_conntrack_tuple *tuple)
{
@@ -103,7 +98,7 @@ static int icmp_packet(struct nf_conn *ct,
}
if (!timeout)
- timeout = &icmp_pernet(nf_ct_net(ct))->timeout;
+ timeout = &nf_icmp_pernet(nf_ct_net(ct))->timeout;
nf_ct_refresh_acct(ct, ctinfo, skb, *timeout);
return NF_ACCEPT;
@@ -275,7 +270,7 @@ static int icmp_timeout_nlattr_to_obj(struct nlattr *tb[],
struct net *net, void *data)
{
unsigned int *timeout = data;
- struct nf_icmp_net *in = icmp_pernet(net);
+ struct nf_icmp_net *in = nf_icmp_pernet(net);
if (tb[CTA_TIMEOUT_ICMP_TIMEOUT]) {
if (!timeout)
@@ -337,7 +332,7 @@ static int icmp_kmemdup_sysctl_table(struct nf_proto_net *pn,
static int icmp_init_net(struct net *net)
{
- struct nf_icmp_net *in = icmp_pernet(net);
+ struct nf_icmp_net *in = nf_icmp_pernet(net);
struct nf_proto_net *pn = &in->pn;
in->timeout = nf_ct_icmp_timeout;
diff --git a/net/netfilter/nf_conntrack_proto_icmpv6.c b/net/netfilter/nf_conntrack_proto_icmpv6.c
index 378618f..a15eefb 100644
--- a/net/netfilter/nf_conntrack_proto_icmpv6.c
+++ b/net/netfilter/nf_conntrack_proto_icmpv6.c
@@ -30,11 +30,6 @@
static const unsigned int nf_ct_icmpv6_timeout = 30*HZ;
-static inline struct nf_icmp_net *icmpv6_pernet(struct net *net)
-{
- return &net->ct.nf_ct_proto.icmpv6;
-}
-
static bool icmpv6_pkt_to_tuple(const struct sk_buff *skb,
unsigned int dataoff,
struct net *net,
@@ -87,7 +82,7 @@ static bool icmpv6_invert_tuple(struct nf_conntrack_tuple *tuple,
static unsigned int *icmpv6_get_timeouts(struct net *net)
{
- return &icmpv6_pernet(net)->timeout;
+ return &nf_icmpv6_pernet(net)->timeout;
}
/* Returns verdict for packet, or -1 for invalid. */
@@ -286,7 +281,7 @@ static int icmpv6_timeout_nlattr_to_obj(struct nlattr *tb[],
struct net *net, void *data)
{
unsigned int *timeout = data;
- struct nf_icmp_net *in = icmpv6_pernet(net);
+ struct nf_icmp_net *in = nf_icmpv6_pernet(net);
if (!timeout)
timeout = icmpv6_get_timeouts(net);
@@ -348,7 +343,7 @@ static int icmpv6_kmemdup_sysctl_table(struct nf_proto_net *pn,
static int icmpv6_init_net(struct net *net)
{
- struct nf_icmp_net *in = icmpv6_pernet(net);
+ struct nf_icmp_net *in = nf_icmpv6_pernet(net);
struct nf_proto_net *pn = &in->pn;
in->timeout = nf_ct_icmpv6_timeout;
diff --git a/net/netfilter/nf_conntrack_proto_sctp.c b/net/netfilter/nf_conntrack_proto_sctp.c
index 3d719d3..d53e3e7 100644
--- a/net/netfilter/nf_conntrack_proto_sctp.c
+++ b/net/netfilter/nf_conntrack_proto_sctp.c
@@ -146,11 +146,6 @@ static const u8 sctp_conntracks[2][11][SCTP_CONNTRACK_MAX] = {
}
};
-static inline struct nf_sctp_net *sctp_pernet(struct net *net)
-{
- return &net->ct.nf_ct_proto.sctp;
-}
-
#ifdef CONFIG_NF_CONNTRACK_PROCFS
/* Print out the private part of the conntrack. */
static void sctp_print_conntrack(struct seq_file *s, struct nf_conn *ct)
@@ -480,7 +475,7 @@ static int sctp_packet(struct nf_conn *ct,
timeouts = nf_ct_timeout_lookup(ct);
if (!timeouts)
- timeouts = sctp_pernet(nf_ct_net(ct))->timeouts;
+ timeouts = nf_sctp_pernet(nf_ct_net(ct))->timeouts;
nf_ct_refresh_acct(ct, ctinfo, skb, timeouts[new_state]);
@@ -599,7 +594,7 @@ static int sctp_timeout_nlattr_to_obj(struct nlattr *tb[],
struct net *net, void *data)
{
unsigned int *timeouts = data;
- struct nf_sctp_net *sn = sctp_pernet(net);
+ struct nf_sctp_net *sn = nf_sctp_pernet(net);
int i;
/* set default SCTP timeouts. */
@@ -736,7 +731,7 @@ static int sctp_kmemdup_sysctl_table(struct nf_proto_net *pn,
static int sctp_init_net(struct net *net)
{
- struct nf_sctp_net *sn = sctp_pernet(net);
+ struct nf_sctp_net *sn = nf_sctp_pernet(net);
struct nf_proto_net *pn = &sn->pn;
if (!pn->users) {
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index 1bcf998..4dcbd51 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -272,11 +272,6 @@ static const u8 tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = {
}
};
-static inline struct nf_tcp_net *tcp_pernet(struct net *net)
-{
- return &net->ct.nf_ct_proto.tcp;
-}
-
#ifdef CONFIG_NF_CONNTRACK_PROCFS
/* Print out the private part of the conntrack. */
static void tcp_print_conntrack(struct seq_file *s, struct nf_conn *ct)
@@ -475,7 +470,7 @@ static bool tcp_in_window(const struct nf_conn *ct,
const struct tcphdr *tcph)
{
struct net *net = nf_ct_net(ct);
- struct nf_tcp_net *tn = tcp_pernet(net);
+ struct nf_tcp_net *tn = nf_tcp_pernet(net);
struct ip_ct_tcp_state *sender = &state->seen[dir];
struct ip_ct_tcp_state *receiver = &state->seen[!dir];
const struct nf_conntrack_tuple *tuple = &ct->tuplehash[dir].tuple;
@@ -767,7 +762,7 @@ static noinline bool tcp_new(struct nf_conn *ct, const struct sk_buff *skb,
{
enum tcp_conntrack new_state;
struct net *net = nf_ct_net(ct);
- const struct nf_tcp_net *tn = tcp_pernet(net);
+ const struct nf_tcp_net *tn = nf_tcp_pernet(net);
const struct ip_ct_tcp_state *sender = &ct->proto.tcp.seen[0];
const struct ip_ct_tcp_state *receiver = &ct->proto.tcp.seen[1];
@@ -841,7 +836,7 @@ static int tcp_packet(struct nf_conn *ct,
const struct nf_hook_state *state)
{
struct net *net = nf_ct_net(ct);
- struct nf_tcp_net *tn = tcp_pernet(net);
+ struct nf_tcp_net *tn = nf_tcp_pernet(net);
struct nf_conntrack_tuple *tuple;
enum tcp_conntrack new_state, old_state;
unsigned int index, *timeouts;
@@ -1283,7 +1278,7 @@ static unsigned int tcp_nlattr_tuple_size(void)
static int tcp_timeout_nlattr_to_obj(struct nlattr *tb[],
struct net *net, void *data)
{
- struct nf_tcp_net *tn = tcp_pernet(net);
+ struct nf_tcp_net *tn = nf_tcp_pernet(net);
unsigned int *timeouts = data;
int i;
@@ -1508,7 +1503,7 @@ static int tcp_kmemdup_sysctl_table(struct nf_proto_net *pn,
static int tcp_init_net(struct net *net)
{
- struct nf_tcp_net *tn = tcp_pernet(net);
+ struct nf_tcp_net *tn = nf_tcp_pernet(net);
struct nf_proto_net *pn = &tn->pn;
if (!pn->users) {
diff --git a/net/netfilter/nf_conntrack_proto_udp.c b/net/netfilter/nf_conntrack_proto_udp.c
index a7aa703..c879d8d 100644
--- a/net/netfilter/nf_conntrack_proto_udp.c
+++ b/net/netfilter/nf_conntrack_proto_udp.c
@@ -32,14 +32,9 @@ static const unsigned int udp_timeouts[UDP_CT_MAX] = {
[UDP_CT_REPLIED] = 180*HZ,
};
-static inline struct nf_udp_net *udp_pernet(struct net *net)
-{
- return &net->ct.nf_ct_proto.udp;
-}
-
static unsigned int *udp_get_timeouts(struct net *net)
{
- return udp_pernet(net)->timeouts;
+ return nf_udp_pernet(net)->timeouts;
}
static void udp_error_log(const struct sk_buff *skb,
@@ -212,7 +207,7 @@ static int udp_timeout_nlattr_to_obj(struct nlattr *tb[],
struct net *net, void *data)
{
unsigned int *timeouts = data;
- struct nf_udp_net *un = udp_pernet(net);
+ struct nf_udp_net *un = nf_udp_pernet(net);
if (!timeouts)
timeouts = un->timeouts;
@@ -292,7 +287,7 @@ static int udp_kmemdup_sysctl_table(struct nf_proto_net *pn,
static int udp_init_net(struct net *net)
{
- struct nf_udp_net *un = udp_pernet(net);
+ struct nf_udp_net *un = nf_udp_pernet(net);
struct nf_proto_net *pn = &un->pn;
if (!pn->users) {
diff --git a/net/netfilter/nfnetlink_cttimeout.c b/net/netfilter/nfnetlink_cttimeout.c
index e7a50af..a518eb1 100644
--- a/net/netfilter/nfnetlink_cttimeout.c
+++ b/net/netfilter/nfnetlink_cttimeout.c
@@ -382,7 +382,8 @@ static int cttimeout_default_set(struct net *net, struct sock *ctnl,
static int
cttimeout_default_fill_info(struct net *net, struct sk_buff *skb, u32 portid,
u32 seq, u32 type, int event, u16 l3num,
- const struct nf_conntrack_l4proto *l4proto)
+ const struct nf_conntrack_l4proto *l4proto,
+ const unsigned int *timeouts)
{
struct nlmsghdr *nlh;
struct nfgenmsg *nfmsg;
@@ -408,7 +409,7 @@ cttimeout_default_fill_info(struct net *net, struct sk_buff *skb, u32 portid,
if (!nest_parms)
goto nla_put_failure;
- ret = l4proto->ctnl_timeout.obj_to_nlattr(skb, NULL);
+ ret = l4proto->ctnl_timeout.obj_to_nlattr(skb, timeouts);
if (ret < 0)
goto nla_put_failure;
@@ -430,6 +431,7 @@ static int cttimeout_default_get(struct net *net, struct sock *ctnl,
struct netlink_ext_ack *extack)
{
const struct nf_conntrack_l4proto *l4proto;
+ unsigned int *timeouts = NULL;
struct sk_buff *skb2;
int ret, err;
__u16 l3num;
@@ -442,12 +444,44 @@ static int cttimeout_default_get(struct net *net, struct sock *ctnl,
l4num = nla_get_u8(cda[CTA_TIMEOUT_L4PROTO]);
l4proto = nf_ct_l4proto_find_get(l4num);
- /* This protocol is not supported, skip. */
- if (l4proto->l4proto != l4num) {
- err = -EOPNOTSUPP;
+ err = -EOPNOTSUPP;
+ if (l4proto->l4proto != l4num)
goto err;
+
+ switch (l4proto->l4proto) {
+ case IPPROTO_ICMP:
+ timeouts = &nf_icmp_pernet(net)->timeout;
+ break;
+ case IPPROTO_TCP:
+ timeouts = nf_tcp_pernet(net)->timeouts;
+ break;
+ case IPPROTO_UDP:
+ timeouts = nf_udp_pernet(net)->timeouts;
+ break;
+ case IPPROTO_DCCP:
+#ifdef CONFIG_NF_CT_PROTO_DCCP
+ timeouts = nf_dccp_pernet(net)->dccp_timeout;
+#endif
+ break;
+ case IPPROTO_ICMPV6:
+ timeouts = &nf_icmpv6_pernet(net)->timeout;
+ break;
+ case IPPROTO_SCTP:
+#ifdef CONFIG_NF_CT_PROTO_SCTP
+ timeouts = nf_sctp_pernet(net)->timeouts;
+#endif
+ break;
+ case 255:
+ timeouts = &nf_generic_pernet(net)->timeout;
+ break;
+ default:
+ WARN_ON_ONCE(1);
+ break;
}
+ if (!timeouts)
+ goto err;
+
skb2 = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (skb2 == NULL) {
err = -ENOMEM;
@@ -458,8 +492,7 @@ static int cttimeout_default_get(struct net *net, struct sock *ctnl,
nlh->nlmsg_seq,
NFNL_MSG_TYPE(nlh->nlmsg_type),
IPCTNL_MSG_TIMEOUT_DEFAULT_SET,
- l3num,
- l4proto);
+ l3num, l4proto, timeouts);
if (ret <= 0) {
kfree_skb(skb2);
err = -ENOMEM;
diff --git a/net/netfilter/nft_compat.c b/net/netfilter/nft_compat.c
index 768292e..9d0ede4 100644
--- a/net/netfilter/nft_compat.c
+++ b/net/netfilter/nft_compat.c
@@ -54,9 +54,11 @@ static bool nft_xt_put(struct nft_xt *xt)
return false;
}
-static int nft_compat_chain_validate_dependency(const char *tablename,
- const struct nft_chain *chain)
+static int nft_compat_chain_validate_dependency(const struct nft_ctx *ctx,
+ const char *tablename)
{
+ enum nft_chain_types type = NFT_CHAIN_T_DEFAULT;
+ const struct nft_chain *chain = ctx->chain;
const struct nft_base_chain *basechain;
if (!tablename ||
@@ -64,9 +66,12 @@ static int nft_compat_chain_validate_dependency(const char *tablename,
return 0;
basechain = nft_base_chain(chain);
- if (strcmp(tablename, "nat") == 0 &&
- basechain->type->type != NFT_CHAIN_T_NAT)
- return -EINVAL;
+ if (strcmp(tablename, "nat") == 0) {
+ if (ctx->family != NFPROTO_BRIDGE)
+ type = NFT_CHAIN_T_NAT;
+ if (basechain->type->type != type)
+ return -EINVAL;
+ }
return 0;
}
@@ -342,8 +347,7 @@ static int nft_target_validate(const struct nft_ctx *ctx,
if (target->hooks && !(hook_mask & target->hooks))
return -EINVAL;
- ret = nft_compat_chain_validate_dependency(target->table,
- ctx->chain);
+ ret = nft_compat_chain_validate_dependency(ctx, target->table);
if (ret < 0)
return ret;
}
@@ -590,8 +594,7 @@ static int nft_match_validate(const struct nft_ctx *ctx,
if (match->hooks && !(hook_mask & match->hooks))
return -EINVAL;
- ret = nft_compat_chain_validate_dependency(match->table,
- ctx->chain);
+ ret = nft_compat_chain_validate_dependency(ctx, match->table);
if (ret < 0)
return ret;
}
diff --git a/net/netfilter/nft_numgen.c b/net/netfilter/nft_numgen.c
index 649d170..3cc1b3d 100644
--- a/net/netfilter/nft_numgen.c
+++ b/net/netfilter/nft_numgen.c
@@ -24,7 +24,6 @@ struct nft_ng_inc {
u32 modulus;
atomic_t counter;
u32 offset;
- struct nft_set *map;
};
static u32 nft_ng_inc_gen(struct nft_ng_inc *priv)
@@ -48,34 +47,11 @@ static void nft_ng_inc_eval(const struct nft_expr *expr,
regs->data[priv->dreg] = nft_ng_inc_gen(priv);
}
-static void nft_ng_inc_map_eval(const struct nft_expr *expr,
- struct nft_regs *regs,
- const struct nft_pktinfo *pkt)
-{
- struct nft_ng_inc *priv = nft_expr_priv(expr);
- const struct nft_set *map = priv->map;
- const struct nft_set_ext *ext;
- u32 result;
- bool found;
-
- result = nft_ng_inc_gen(priv);
- found = map->ops->lookup(nft_net(pkt), map, &result, &ext);
-
- if (!found)
- return;
-
- nft_data_copy(®s->data[priv->dreg],
- nft_set_ext_data(ext), map->dlen);
-}
-
static const struct nla_policy nft_ng_policy[NFTA_NG_MAX + 1] = {
[NFTA_NG_DREG] = { .type = NLA_U32 },
[NFTA_NG_MODULUS] = { .type = NLA_U32 },
[NFTA_NG_TYPE] = { .type = NLA_U32 },
[NFTA_NG_OFFSET] = { .type = NLA_U32 },
- [NFTA_NG_SET_NAME] = { .type = NLA_STRING,
- .len = NFT_SET_MAXNAMELEN - 1 },
- [NFTA_NG_SET_ID] = { .type = NLA_U32 },
};
static int nft_ng_inc_init(const struct nft_ctx *ctx,
@@ -101,22 +77,6 @@ static int nft_ng_inc_init(const struct nft_ctx *ctx,
NFT_DATA_VALUE, sizeof(u32));
}
-static int nft_ng_inc_map_init(const struct nft_ctx *ctx,
- const struct nft_expr *expr,
- const struct nlattr * const tb[])
-{
- struct nft_ng_inc *priv = nft_expr_priv(expr);
- u8 genmask = nft_genmask_next(ctx->net);
-
- nft_ng_inc_init(ctx, expr, tb);
-
- priv->map = nft_set_lookup_global(ctx->net, ctx->table,
- tb[NFTA_NG_SET_NAME],
- tb[NFTA_NG_SET_ID], genmask);
-
- return PTR_ERR_OR_ZERO(priv->map);
-}
-
static int nft_ng_dump(struct sk_buff *skb, enum nft_registers dreg,
u32 modulus, enum nft_ng_types type, u32 offset)
{
@@ -143,27 +103,10 @@ static int nft_ng_inc_dump(struct sk_buff *skb, const struct nft_expr *expr)
priv->offset);
}
-static int nft_ng_inc_map_dump(struct sk_buff *skb,
- const struct nft_expr *expr)
-{
- const struct nft_ng_inc *priv = nft_expr_priv(expr);
-
- if (nft_ng_dump(skb, priv->dreg, priv->modulus,
- NFT_NG_INCREMENTAL, priv->offset) ||
- nla_put_string(skb, NFTA_NG_SET_NAME, priv->map->name))
- goto nla_put_failure;
-
- return 0;
-
-nla_put_failure:
- return -1;
-}
-
struct nft_ng_random {
enum nft_registers dreg:8;
u32 modulus;
u32 offset;
- struct nft_set *map;
};
static u32 nft_ng_random_gen(struct nft_ng_random *priv)
@@ -183,25 +126,6 @@ static void nft_ng_random_eval(const struct nft_expr *expr,
regs->data[priv->dreg] = nft_ng_random_gen(priv);
}
-static void nft_ng_random_map_eval(const struct nft_expr *expr,
- struct nft_regs *regs,
- const struct nft_pktinfo *pkt)
-{
- struct nft_ng_random *priv = nft_expr_priv(expr);
- const struct nft_set *map = priv->map;
- const struct nft_set_ext *ext;
- u32 result;
- bool found;
-
- result = nft_ng_random_gen(priv);
- found = map->ops->lookup(nft_net(pkt), map, &result, &ext);
- if (!found)
- return;
-
- nft_data_copy(®s->data[priv->dreg],
- nft_set_ext_data(ext), map->dlen);
-}
-
static int nft_ng_random_init(const struct nft_ctx *ctx,
const struct nft_expr *expr,
const struct nlattr * const tb[])
@@ -226,21 +150,6 @@ static int nft_ng_random_init(const struct nft_ctx *ctx,
NFT_DATA_VALUE, sizeof(u32));
}
-static int nft_ng_random_map_init(const struct nft_ctx *ctx,
- const struct nft_expr *expr,
- const struct nlattr * const tb[])
-{
- struct nft_ng_random *priv = nft_expr_priv(expr);
- u8 genmask = nft_genmask_next(ctx->net);
-
- nft_ng_random_init(ctx, expr, tb);
- priv->map = nft_set_lookup_global(ctx->net, ctx->table,
- tb[NFTA_NG_SET_NAME],
- tb[NFTA_NG_SET_ID], genmask);
-
- return PTR_ERR_OR_ZERO(priv->map);
-}
-
static int nft_ng_random_dump(struct sk_buff *skb, const struct nft_expr *expr)
{
const struct nft_ng_random *priv = nft_expr_priv(expr);
@@ -249,22 +158,6 @@ static int nft_ng_random_dump(struct sk_buff *skb, const struct nft_expr *expr)
priv->offset);
}
-static int nft_ng_random_map_dump(struct sk_buff *skb,
- const struct nft_expr *expr)
-{
- const struct nft_ng_random *priv = nft_expr_priv(expr);
-
- if (nft_ng_dump(skb, priv->dreg, priv->modulus,
- NFT_NG_RANDOM, priv->offset) ||
- nla_put_string(skb, NFTA_NG_SET_NAME, priv->map->name))
- goto nla_put_failure;
-
- return 0;
-
-nla_put_failure:
- return -1;
-}
-
static struct nft_expr_type nft_ng_type;
static const struct nft_expr_ops nft_ng_inc_ops = {
.type = &nft_ng_type,
@@ -274,14 +167,6 @@ static const struct nft_expr_ops nft_ng_inc_ops = {
.dump = nft_ng_inc_dump,
};
-static const struct nft_expr_ops nft_ng_inc_map_ops = {
- .type = &nft_ng_type,
- .size = NFT_EXPR_SIZE(sizeof(struct nft_ng_inc)),
- .eval = nft_ng_inc_map_eval,
- .init = nft_ng_inc_map_init,
- .dump = nft_ng_inc_map_dump,
-};
-
static const struct nft_expr_ops nft_ng_random_ops = {
.type = &nft_ng_type,
.size = NFT_EXPR_SIZE(sizeof(struct nft_ng_random)),
@@ -290,14 +175,6 @@ static const struct nft_expr_ops nft_ng_random_ops = {
.dump = nft_ng_random_dump,
};
-static const struct nft_expr_ops nft_ng_random_map_ops = {
- .type = &nft_ng_type,
- .size = NFT_EXPR_SIZE(sizeof(struct nft_ng_random)),
- .eval = nft_ng_random_map_eval,
- .init = nft_ng_random_map_init,
- .dump = nft_ng_random_map_dump,
-};
-
static const struct nft_expr_ops *
nft_ng_select_ops(const struct nft_ctx *ctx, const struct nlattr * const tb[])
{
@@ -312,12 +189,8 @@ nft_ng_select_ops(const struct nft_ctx *ctx, const struct nlattr * const tb[])
switch (type) {
case NFT_NG_INCREMENTAL:
- if (tb[NFTA_NG_SET_NAME])
- return &nft_ng_inc_map_ops;
return &nft_ng_inc_ops;
case NFT_NG_RANDOM:
- if (tb[NFTA_NG_SET_NAME])
- return &nft_ng_random_map_ops;
return &nft_ng_random_ops;
}
diff --git a/net/netfilter/nft_osf.c b/net/netfilter/nft_osf.c
index ca5e5d8..b13618c 100644
--- a/net/netfilter/nft_osf.c
+++ b/net/netfilter/nft_osf.c
@@ -50,7 +50,7 @@ static int nft_osf_init(const struct nft_ctx *ctx,
int err;
u8 ttl;
- if (nla_get_u8(tb[NFTA_OSF_TTL])) {
+ if (tb[NFTA_OSF_TTL]) {
ttl = nla_get_u8(tb[NFTA_OSF_TTL]);
if (ttl > 2)
return -EINVAL;
diff --git a/net/netfilter/xt_IDLETIMER.c b/net/netfilter/xt_IDLETIMER.c
index c6acfc2..eb4cbd2 100644
--- a/net/netfilter/xt_IDLETIMER.c
+++ b/net/netfilter/xt_IDLETIMER.c
@@ -114,6 +114,22 @@ static void idletimer_tg_expired(struct timer_list *t)
schedule_work(&timer->work);
}
+static int idletimer_check_sysfs_name(const char *name, unsigned int size)
+{
+ int ret;
+
+ ret = xt_check_proc_name(name, size);
+ if (ret < 0)
+ return ret;
+
+ if (!strcmp(name, "power") ||
+ !strcmp(name, "subsystem") ||
+ !strcmp(name, "uevent"))
+ return -EINVAL;
+
+ return 0;
+}
+
static int idletimer_tg_create(struct idletimer_tg_info *info)
{
int ret;
@@ -124,6 +140,10 @@ static int idletimer_tg_create(struct idletimer_tg_info *info)
goto out;
}
+ ret = idletimer_check_sysfs_name(info->label, sizeof(info->label));
+ if (ret < 0)
+ goto out_free_timer;
+
sysfs_attr_init(&info->timer->attr.attr);
info->timer->attr.attr.name = kstrdup(info->label, GFP_KERNEL);
if (!info->timer->attr.attr.name) {
diff --git a/net/openvswitch/conntrack.c b/net/openvswitch/conntrack.c
index 6bec37a..a4660c4 100644
--- a/net/openvswitch/conntrack.c
+++ b/net/openvswitch/conntrack.c
@@ -1203,7 +1203,8 @@ static int ovs_ct_commit(struct net *net, struct sw_flow_key *key,
&info->labels.mask);
if (err)
return err;
- } else if (labels_nonzero(&info->labels.mask)) {
+ } else if (IS_ENABLED(CONFIG_NF_CONNTRACK_LABELS) &&
+ labels_nonzero(&info->labels.mask)) {
err = ovs_ct_set_labels(ct, key, &info->labels.value,
&info->labels.mask);
if (err)
diff --git a/net/rxrpc/ar-internal.h b/net/rxrpc/ar-internal.h
index 382196e..bc628ac 100644
--- a/net/rxrpc/ar-internal.h
+++ b/net/rxrpc/ar-internal.h
@@ -611,6 +611,7 @@ struct rxrpc_call {
* not hard-ACK'd packet follows this.
*/
rxrpc_seq_t tx_top; /* Highest Tx slot allocated. */
+ u16 tx_backoff; /* Delay to insert due to Tx failure */
/* TCP-style slow-start congestion control [RFC5681]. Since the SMSS
* is fixed, we keep these numbers in terms of segments (ie. DATA
diff --git a/net/rxrpc/call_event.c b/net/rxrpc/call_event.c
index 8e7434e..468efc3 100644
--- a/net/rxrpc/call_event.c
+++ b/net/rxrpc/call_event.c
@@ -123,6 +123,7 @@ static void __rxrpc_propose_ACK(struct rxrpc_call *call, u8 ack_reason,
else
ack_at = expiry;
+ ack_at += READ_ONCE(call->tx_backoff);
ack_at += now;
if (time_before(ack_at, call->ack_at)) {
WRITE_ONCE(call->ack_at, ack_at);
@@ -311,6 +312,7 @@ void rxrpc_process_call(struct work_struct *work)
container_of(work, struct rxrpc_call, processor);
rxrpc_serial_t *send_ack;
unsigned long now, next, t;
+ unsigned int iterations = 0;
rxrpc_see_call(call);
@@ -319,6 +321,11 @@ void rxrpc_process_call(struct work_struct *work)
call->debug_id, rxrpc_call_states[call->state], call->events);
recheck_state:
+ /* Limit the number of times we do this before returning to the manager */
+ iterations++;
+ if (iterations > 5)
+ goto requeue;
+
if (test_and_clear_bit(RXRPC_CALL_EV_ABORT, &call->events)) {
rxrpc_send_abort_packet(call);
goto recheck_state;
@@ -447,13 +454,16 @@ void rxrpc_process_call(struct work_struct *work)
rxrpc_reduce_call_timer(call, next, now, rxrpc_timer_restart);
/* other events may have been raised since we started checking */
- if (call->events && call->state < RXRPC_CALL_COMPLETE) {
- __rxrpc_queue_call(call);
- goto out;
- }
+ if (call->events && call->state < RXRPC_CALL_COMPLETE)
+ goto requeue;
out_put:
rxrpc_put_call(call, rxrpc_call_put);
out:
_leave("");
+ return;
+
+requeue:
+ __rxrpc_queue_call(call);
+ goto out;
}
diff --git a/net/rxrpc/output.c b/net/rxrpc/output.c
index 1894188..736aa92 100644
--- a/net/rxrpc/output.c
+++ b/net/rxrpc/output.c
@@ -35,6 +35,21 @@ struct rxrpc_abort_buffer {
static const char rxrpc_keepalive_string[] = "";
/*
+ * Increase Tx backoff on transmission failure and clear it on success.
+ */
+static void rxrpc_tx_backoff(struct rxrpc_call *call, int ret)
+{
+ if (ret < 0) {
+ u16 tx_backoff = READ_ONCE(call->tx_backoff);
+
+ if (tx_backoff < HZ)
+ WRITE_ONCE(call->tx_backoff, tx_backoff + 1);
+ } else {
+ WRITE_ONCE(call->tx_backoff, 0);
+ }
+}
+
+/*
* Arrange for a keepalive ping a certain time after we last transmitted. This
* lets the far side know we're still interested in this call and helps keep
* the route through any intervening firewall open.
@@ -210,6 +225,7 @@ int rxrpc_send_ack_packet(struct rxrpc_call *call, bool ping,
else
trace_rxrpc_tx_packet(call->debug_id, &pkt->whdr,
rxrpc_tx_point_call_ack);
+ rxrpc_tx_backoff(call, ret);
if (call->state < RXRPC_CALL_COMPLETE) {
if (ret < 0) {
@@ -218,7 +234,7 @@ int rxrpc_send_ack_packet(struct rxrpc_call *call, bool ping,
rxrpc_propose_ACK(call, pkt->ack.reason,
ntohs(pkt->ack.maxSkew),
ntohl(pkt->ack.serial),
- true, true,
+ false, true,
rxrpc_propose_ack_retry_tx);
} else {
spin_lock_bh(&call->lock);
@@ -300,7 +316,7 @@ int rxrpc_send_abort_packet(struct rxrpc_call *call)
else
trace_rxrpc_tx_packet(call->debug_id, &pkt.whdr,
rxrpc_tx_point_call_abort);
-
+ rxrpc_tx_backoff(call, ret);
rxrpc_put_connection(conn);
return ret;
@@ -413,6 +429,7 @@ int rxrpc_send_data_packet(struct rxrpc_call *call, struct sk_buff *skb,
else
trace_rxrpc_tx_packet(call->debug_id, &whdr,
rxrpc_tx_point_call_data_nofrag);
+ rxrpc_tx_backoff(call, ret);
if (ret == -EMSGSIZE)
goto send_fragmentable;
@@ -445,9 +462,18 @@ int rxrpc_send_data_packet(struct rxrpc_call *call, struct sk_buff *skb,
rxrpc_reduce_call_timer(call, expect_rx_by, nowj,
rxrpc_timer_set_for_normal);
}
- }
- rxrpc_set_keepalive(call);
+ rxrpc_set_keepalive(call);
+ } else {
+ /* Cancel the call if the initial transmission fails,
+ * particularly if that's due to network routing issues that
+ * aren't going away anytime soon. The layer above can arrange
+ * the retransmission.
+ */
+ if (!test_and_set_bit(RXRPC_CALL_BEGAN_RX_TIMER, &call->flags))
+ rxrpc_set_call_completion(call, RXRPC_CALL_LOCAL_ERROR,
+ RX_USER_ABORT, ret);
+ }
_leave(" = %d [%u]", ret, call->peer->maxdata);
return ret;
@@ -506,6 +532,7 @@ int rxrpc_send_data_packet(struct rxrpc_call *call, struct sk_buff *skb,
else
trace_rxrpc_tx_packet(call->debug_id, &whdr,
rxrpc_tx_point_call_data_frag);
+ rxrpc_tx_backoff(call, ret);
up_write(&conn->params.local->defrag_sem);
goto done;
diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c
index 1dae5f2..c8cf4d1 100644
--- a/net/sched/act_mirred.c
+++ b/net/sched/act_mirred.c
@@ -258,7 +258,8 @@ static int tcf_mirred_act(struct sk_buff *skb, const struct tc_action *a,
if (is_redirect) {
skb2->tc_redirected = 1;
skb2->tc_from_ingress = skb2->tc_at_ingress;
-
+ if (skb2->tc_from_ingress)
+ skb2->tstamp = 0;
/* let's the caller reinsert the packet, if possible */
if (use_reinsert) {
res->ingress = want_ingress;
diff --git a/net/sched/cls_flower.c b/net/sched/cls_flower.c
index 9aada2d..c6c3278 100644
--- a/net/sched/cls_flower.c
+++ b/net/sched/cls_flower.c
@@ -709,11 +709,23 @@ static int fl_set_enc_opt(struct nlattr **tb, struct fl_flow_key *key,
struct netlink_ext_ack *extack)
{
const struct nlattr *nla_enc_key, *nla_opt_key, *nla_opt_msk = NULL;
- int option_len, key_depth, msk_depth = 0;
+ int err, option_len, key_depth, msk_depth = 0;
+
+ err = nla_validate_nested(tb[TCA_FLOWER_KEY_ENC_OPTS],
+ TCA_FLOWER_KEY_ENC_OPTS_MAX,
+ enc_opts_policy, extack);
+ if (err)
+ return err;
nla_enc_key = nla_data(tb[TCA_FLOWER_KEY_ENC_OPTS]);
if (tb[TCA_FLOWER_KEY_ENC_OPTS_MASK]) {
+ err = nla_validate_nested(tb[TCA_FLOWER_KEY_ENC_OPTS_MASK],
+ TCA_FLOWER_KEY_ENC_OPTS_MAX,
+ enc_opts_policy, extack);
+ if (err)
+ return err;
+
nla_opt_msk = nla_data(tb[TCA_FLOWER_KEY_ENC_OPTS_MASK]);
msk_depth = nla_len(tb[TCA_FLOWER_KEY_ENC_OPTS_MASK]);
}
diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c
index 57b3ad9..2c38e3d 100644
--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -648,15 +648,6 @@ static struct sk_buff *netem_dequeue(struct Qdisc *sch)
*/
skb->dev = qdisc_dev(sch);
-#ifdef CONFIG_NET_CLS_ACT
- /*
- * If it's at ingress let's pretend the delay is
- * from the network (tstamp will be updated).
- */
- if (skb->tc_redirected && skb->tc_from_ingress)
- skb->tstamp = 0;
-#endif
-
if (q->slot.slot_next) {
q->slot.packets_left--;
q->slot.bytes_left -= qdisc_pkt_len(skb);
diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c
index 9cb854b..c37e1c2 100644
--- a/net/sctp/outqueue.c
+++ b/net/sctp/outqueue.c
@@ -212,7 +212,7 @@ void sctp_outq_init(struct sctp_association *asoc, struct sctp_outq *q)
INIT_LIST_HEAD(&q->retransmit);
INIT_LIST_HEAD(&q->sacked);
INIT_LIST_HEAD(&q->abandoned);
- sctp_sched_set_sched(asoc, SCTP_SS_FCFS);
+ sctp_sched_set_sched(asoc, SCTP_SS_DEFAULT);
}
/* Free the outqueue structure and any related pending chunks.
diff --git a/net/tipc/link.c b/net/tipc/link.c
index 201c3b5..836727e 100644
--- a/net/tipc/link.c
+++ b/net/tipc/link.c
@@ -1594,14 +1594,17 @@ static int tipc_link_proto_rcv(struct tipc_link *l, struct sk_buff *skb,
if (in_range(peers_prio, l->priority + 1, TIPC_MAX_LINK_PRI))
l->priority = peers_prio;
- /* ACTIVATE_MSG serves as PEER_RESET if link is already down */
- if (msg_peer_stopping(hdr))
+ /* If peer is going down we want full re-establish cycle */
+ if (msg_peer_stopping(hdr)) {
rc = tipc_link_fsm_evt(l, LINK_FAILURE_EVT);
- else if ((mtyp == RESET_MSG) || !link_is_up(l))
+ break;
+ }
+ /* ACTIVATE_MSG serves as PEER_RESET if link is already down */
+ if (mtyp == RESET_MSG || !link_is_up(l))
rc = tipc_link_fsm_evt(l, LINK_PEER_RESET_EVT);
/* ACTIVATE_MSG takes up link if it was already locally reset */
- if ((mtyp == ACTIVATE_MSG) && (l->state == LINK_ESTABLISHING))
+ if (mtyp == ACTIVATE_MSG && l->state == LINK_ESTABLISHING)
rc = TIPC_LINK_UP_EVT;
l->peer_session = msg_session(hdr);
diff --git a/scripts/kconfig/merge_config.sh b/scripts/kconfig/merge_config.sh
index da66e77..0ef9064 100755
--- a/scripts/kconfig/merge_config.sh
+++ b/scripts/kconfig/merge_config.sh
@@ -102,7 +102,8 @@
fi
MERGE_LIST=$*
-SED_CONFIG_EXP="s/^\(# \)\{0,1\}\(${CONFIG_PREFIX}[a-zA-Z0-9_]*\)[= ].*/\2/p"
+SED_CONFIG_EXP1="s/^\(${CONFIG_PREFIX}[a-zA-Z0-9_]*\)=.*/\1/p"
+SED_CONFIG_EXP2="s/^# \(${CONFIG_PREFIX}[a-zA-Z0-9_]*\) is not set$/\1/p"
TMP_FILE=$(mktemp ./.tmp.config.XXXXXXXXXX)
@@ -116,7 +117,7 @@
echo "The merge file '$MERGE_FILE' does not exist. Exit." >&2
exit 1
fi
- CFG_LIST=$(sed -n "$SED_CONFIG_EXP" $MERGE_FILE)
+ CFG_LIST=$(sed -n -e "$SED_CONFIG_EXP1" -e "$SED_CONFIG_EXP2" $MERGE_FILE)
for CFG in $CFG_LIST ; do
grep -q -w $CFG $TMP_FILE || continue
@@ -159,7 +160,7 @@
# Check all specified config values took (might have missed-dependency issues)
-for CFG in $(sed -n "$SED_CONFIG_EXP" $TMP_FILE); do
+for CFG in $(sed -n -e "$SED_CONFIG_EXP1" -e "$SED_CONFIG_EXP2" $TMP_FILE); do
REQUESTED_VAL=$(grep -w -e "$CFG" $TMP_FILE)
ACTUAL_VAL=$(grep -w -e "$CFG" "$KCONFIG_CONFIG")
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index 90c9a8a..f43a274 100755
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -81,11 +81,11 @@
cp System.map "$tmpdir/boot/System.map-$version"
cp $KCONFIG_CONFIG "$tmpdir/boot/config-$version"
fi
-cp "$($MAKE -s image_name)" "$tmpdir/$installed_image_path"
+cp "$($MAKE -s -f $srctree/Makefile image_name)" "$tmpdir/$installed_image_path"
-if grep -q "^CONFIG_OF=y" $KCONFIG_CONFIG ; then
+if grep -q "^CONFIG_OF_EARLY_FLATTREE=y" $KCONFIG_CONFIG ; then
# Only some architectures with OF support have this target
- if grep -q dtbs_install "${srctree}/arch/$SRCARCH/Makefile"; then
+ if [ -d "${srctree}/arch/$SRCARCH/boot/dts" ]; then
$MAKE KBUILD_SRC= INSTALL_DTBS_PATH="$tmpdir/usr/lib/$packagename" dtbs_install
fi
fi
diff --git a/scripts/package/mkdebian b/scripts/package/mkdebian
index 663a7f3..edcad61 100755
--- a/scripts/package/mkdebian
+++ b/scripts/package/mkdebian
@@ -88,6 +88,7 @@
version=$KERNELRELEASE
if [ -n "$KDEB_PKGVERSION" ]; then
packageversion=$KDEB_PKGVERSION
+ revision=${packageversion##*-}
else
revision=$(cat .version 2>/dev/null||echo 1)
packageversion=$version-$revision
@@ -205,10 +206,12 @@
#!$(command -v $MAKE) -f
build:
- \$(MAKE) KERNELRELEASE=${version} ARCH=${ARCH} KBUILD_SRC=
+ \$(MAKE) KERNELRELEASE=${version} ARCH=${ARCH} \
+ KBUILD_BUILD_VERSION=${revision} KBUILD_SRC=
binary-arch:
- \$(MAKE) KERNELRELEASE=${version} ARCH=${ARCH} KBUILD_SRC= intdeb-pkg
+ \$(MAKE) KERNELRELEASE=${version} ARCH=${ARCH} \
+ KBUILD_BUILD_VERSION=${revision} KBUILD_SRC= intdeb-pkg
clean:
rm -rf debian/*tmp debian/files
diff --git a/scripts/package/mkspec b/scripts/package/mkspec
index e05646d..009147d 100755
--- a/scripts/package/mkspec
+++ b/scripts/package/mkspec
@@ -12,6 +12,7 @@
# how we were called determines which rpms we build and how we build them
if [ "$1" = prebuilt ]; then
S=DEL
+ MAKE="$MAKE -f $srctree/Makefile"
else
S=
fi
@@ -78,19 +79,19 @@
$S %setup -q
$S
$S %build
-$S make %{?_smp_mflags} KBUILD_BUILD_VERSION=%{release}
+$S $MAKE %{?_smp_mflags} KBUILD_BUILD_VERSION=%{release}
$S
%install
mkdir -p %{buildroot}/boot
%ifarch ia64
mkdir -p %{buildroot}/boot/efi
- cp \$(make image_name) %{buildroot}/boot/efi/vmlinuz-$KERNELRELEASE
+ cp \$($MAKE image_name) %{buildroot}/boot/efi/vmlinuz-$KERNELRELEASE
ln -s efi/vmlinuz-$KERNELRELEASE %{buildroot}/boot/
%else
- cp \$(make image_name) %{buildroot}/boot/vmlinuz-$KERNELRELEASE
+ cp \$($MAKE image_name) %{buildroot}/boot/vmlinuz-$KERNELRELEASE
%endif
-$M make %{?_smp_mflags} INSTALL_MOD_PATH=%{buildroot} KBUILD_SRC= modules_install
- make %{?_smp_mflags} INSTALL_HDR_PATH=%{buildroot}/usr KBUILD_SRC= headers_install
+$M $MAKE %{?_smp_mflags} INSTALL_MOD_PATH=%{buildroot} modules_install
+ $MAKE %{?_smp_mflags} INSTALL_HDR_PATH=%{buildroot}/usr headers_install
cp System.map %{buildroot}/boot/System.map-$KERNELRELEASE
cp .config %{buildroot}/boot/config-$KERNELRELEASE
bzip2 -9 --keep vmlinux
diff --git a/scripts/setlocalversion b/scripts/setlocalversion
index 79f7dd5..71f3941 100755
--- a/scripts/setlocalversion
+++ b/scripts/setlocalversion
@@ -74,7 +74,7 @@
fi
# Check for uncommitted changes
- if git status -uno --porcelain | grep -qv '^.. scripts/package'; then
+ if git diff-index --name-only HEAD | grep -qv "^scripts/package"; then
printf '%s' -dirty
fi
diff --git a/sound/pci/hda/thinkpad_helper.c b/sound/pci/hda/thinkpad_helper.c
index 97f49b7..568575b 100644
--- a/sound/pci/hda/thinkpad_helper.c
+++ b/sound/pci/hda/thinkpad_helper.c
@@ -58,8 +58,8 @@ static void hda_fixup_thinkpad_acpi(struct hda_codec *codec,
removefunc = false;
}
if (led_set_func(TPACPI_LED_MICMUTE, false) >= 0 &&
- snd_hda_gen_add_micmute_led(codec,
- update_tpacpi_micmute) > 0)
+ !snd_hda_gen_add_micmute_led(codec,
+ update_tpacpi_micmute))
removefunc = false;
}
diff --git a/tools/arch/arm64/include/asm/barrier.h b/tools/arch/arm64/include/asm/barrier.h
index 12835ea..378c051 100644
--- a/tools/arch/arm64/include/asm/barrier.h
+++ b/tools/arch/arm64/include/asm/barrier.h
@@ -14,74 +14,75 @@
#define wmb() asm volatile("dmb ishst" ::: "memory")
#define rmb() asm volatile("dmb ishld" ::: "memory")
-#define smp_store_release(p, v) \
-do { \
- union { typeof(*p) __val; char __c[1]; } __u = \
- { .__val = (__force typeof(*p)) (v) }; \
- \
- switch (sizeof(*p)) { \
- case 1: \
- asm volatile ("stlrb %w1, %0" \
- : "=Q" (*p) \
- : "r" (*(__u8 *)__u.__c) \
- : "memory"); \
- break; \
- case 2: \
- asm volatile ("stlrh %w1, %0" \
- : "=Q" (*p) \
- : "r" (*(__u16 *)__u.__c) \
- : "memory"); \
- break; \
- case 4: \
- asm volatile ("stlr %w1, %0" \
- : "=Q" (*p) \
- : "r" (*(__u32 *)__u.__c) \
- : "memory"); \
- break; \
- case 8: \
- asm volatile ("stlr %1, %0" \
- : "=Q" (*p) \
- : "r" (*(__u64 *)__u.__c) \
- : "memory"); \
- break; \
- default: \
- /* Only to shut up gcc ... */ \
- mb(); \
- break; \
- } \
+#define smp_store_release(p, v) \
+do { \
+ union { typeof(*p) __val; char __c[1]; } __u = \
+ { .__val = (v) }; \
+ \
+ switch (sizeof(*p)) { \
+ case 1: \
+ asm volatile ("stlrb %w1, %0" \
+ : "=Q" (*p) \
+ : "r" (*(__u8_alias_t *)__u.__c) \
+ : "memory"); \
+ break; \
+ case 2: \
+ asm volatile ("stlrh %w1, %0" \
+ : "=Q" (*p) \
+ : "r" (*(__u16_alias_t *)__u.__c) \
+ : "memory"); \
+ break; \
+ case 4: \
+ asm volatile ("stlr %w1, %0" \
+ : "=Q" (*p) \
+ : "r" (*(__u32_alias_t *)__u.__c) \
+ : "memory"); \
+ break; \
+ case 8: \
+ asm volatile ("stlr %1, %0" \
+ : "=Q" (*p) \
+ : "r" (*(__u64_alias_t *)__u.__c) \
+ : "memory"); \
+ break; \
+ default: \
+ /* Only to shut up gcc ... */ \
+ mb(); \
+ break; \
+ } \
} while (0)
-#define smp_load_acquire(p) \
-({ \
- union { typeof(*p) __val; char __c[1]; } __u; \
- \
- switch (sizeof(*p)) { \
- case 1: \
- asm volatile ("ldarb %w0, %1" \
- : "=r" (*(__u8 *)__u.__c) \
- : "Q" (*p) : "memory"); \
- break; \
- case 2: \
- asm volatile ("ldarh %w0, %1" \
- : "=r" (*(__u16 *)__u.__c) \
- : "Q" (*p) : "memory"); \
- break; \
- case 4: \
- asm volatile ("ldar %w0, %1" \
- : "=r" (*(__u32 *)__u.__c) \
- : "Q" (*p) : "memory"); \
- break; \
- case 8: \
- asm volatile ("ldar %0, %1" \
- : "=r" (*(__u64 *)__u.__c) \
- : "Q" (*p) : "memory"); \
- break; \
- default: \
- /* Only to shut up gcc ... */ \
- mb(); \
- break; \
- } \
- __u.__val; \
+#define smp_load_acquire(p) \
+({ \
+ union { typeof(*p) __val; char __c[1]; } __u = \
+ { .__c = { 0 } }; \
+ \
+ switch (sizeof(*p)) { \
+ case 1: \
+ asm volatile ("ldarb %w0, %1" \
+ : "=r" (*(__u8_alias_t *)__u.__c) \
+ : "Q" (*p) : "memory"); \
+ break; \
+ case 2: \
+ asm volatile ("ldarh %w0, %1" \
+ : "=r" (*(__u16_alias_t *)__u.__c) \
+ : "Q" (*p) : "memory"); \
+ break; \
+ case 4: \
+ asm volatile ("ldar %w0, %1" \
+ : "=r" (*(__u32_alias_t *)__u.__c) \
+ : "Q" (*p) : "memory"); \
+ break; \
+ case 8: \
+ asm volatile ("ldar %0, %1" \
+ : "=r" (*(__u64_alias_t *)__u.__c) \
+ : "Q" (*p) : "memory"); \
+ break; \
+ default: \
+ /* Only to shut up gcc ... */ \
+ mb(); \
+ break; \
+ } \
+ __u.__val; \
})
#endif /* _TOOLS_LINUX_ASM_AARCH64_BARRIER_H */
diff --git a/tools/perf/Documentation/perf-list.txt b/tools/perf/Documentation/perf-list.txt
index 236b9b97..667c14e 100644
--- a/tools/perf/Documentation/perf-list.txt
+++ b/tools/perf/Documentation/perf-list.txt
@@ -55,7 +55,6 @@
S - read sample value (PERF_SAMPLE_READ)
D - pin the event to the PMU
W - group is weak and will fallback to non-group if not schedulable,
- only supported in 'perf stat' for now.
The 'p' modifier can be used for specifying how precise the instruction
address should be. The 'p' modifier can be specified multiple times:
diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
index 3ccb4f0..d956554 100644
--- a/tools/perf/Makefile.perf
+++ b/tools/perf/Makefile.perf
@@ -387,7 +387,7 @@
linux_uapi_dir := $(srctree)/tools/include/uapi/linux
asm_generic_uapi_dir := $(srctree)/tools/include/uapi/asm-generic
-arch_asm_uapi_dir := $(srctree)/tools/arch/$(ARCH)/include/uapi/asm/
+arch_asm_uapi_dir := $(srctree)/tools/arch/$(SRCARCH)/include/uapi/asm/
beauty_outdir := $(OUTPUT)trace/beauty/generated
beauty_ioctl_outdir := $(beauty_outdir)/ioctl
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 10cf889..488779b 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -391,7 +391,12 @@ static int record__open(struct record *rec)
ui__warning("%s\n", msg);
goto try_again;
}
-
+ if ((errno == EINVAL || errno == EBADF) &&
+ pos->leader != pos &&
+ pos->weak_group) {
+ pos = perf_evlist__reset_weak_group(evlist, pos);
+ goto try_again;
+ }
rc = -errno;
perf_evsel__open_strerror(pos, &opts->target,
errno, msg, sizeof(msg));
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index d1028d7..a635abf 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -383,32 +383,6 @@ static bool perf_evsel__should_store_id(struct perf_evsel *counter)
return STAT_RECORD || counter->attr.read_format & PERF_FORMAT_ID;
}
-static struct perf_evsel *perf_evsel__reset_weak_group(struct perf_evsel *evsel)
-{
- struct perf_evsel *c2, *leader;
- bool is_open = true;
-
- leader = evsel->leader;
- pr_debug("Weak group for %s/%d failed\n",
- leader->name, leader->nr_members);
-
- /*
- * for_each_group_member doesn't work here because it doesn't
- * include the first entry.
- */
- evlist__for_each_entry(evsel_list, c2) {
- if (c2 == evsel)
- is_open = false;
- if (c2->leader == leader) {
- if (is_open)
- perf_evsel__close(c2);
- c2->leader = c2;
- c2->nr_members = 0;
- }
- }
- return leader;
-}
-
static bool is_target_alive(struct target *_target,
struct thread_map *threads)
{
@@ -477,7 +451,7 @@ static int __run_perf_stat(int argc, const char **argv, int run_idx)
if ((errno == EINVAL || errno == EBADF) &&
counter->leader != counter &&
counter->weak_group) {
- counter = perf_evsel__reset_weak_group(counter);
+ counter = perf_evlist__reset_weak_group(evsel_list, counter);
goto try_again;
}
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index b2838de..aa0c73e 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -1429,6 +1429,9 @@ int cmd_top(int argc, const char **argv)
}
}
+ if (opts->branch_stack && callchain_param.enabled)
+ symbol_conf.show_branchflag_count = true;
+
sort__mode = SORT_MODE__TOP;
/* display thread wants entries to be collapsed in a different tree */
perf_hpp_list.need_collapse = 1;
diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index dc8a6c4..8356194 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -108,6 +108,7 @@ struct trace {
} stats;
unsigned int max_stack;
unsigned int min_stack;
+ bool raw_augmented_syscalls;
bool not_ev_qualifier;
bool live;
bool full_time;
@@ -1724,13 +1725,28 @@ static int trace__fprintf_sample(struct trace *trace, struct perf_evsel *evsel,
return printed;
}
-static void *syscall__augmented_args(struct syscall *sc, struct perf_sample *sample, int *augmented_args_size)
+static void *syscall__augmented_args(struct syscall *sc, struct perf_sample *sample, int *augmented_args_size, bool raw_augmented)
{
void *augmented_args = NULL;
+ /*
+ * For now with BPF raw_augmented we hook into raw_syscalls:sys_enter
+ * and there we get all 6 syscall args plus the tracepoint common
+ * fields (sizeof(long)) and the syscall_nr (another long). So we check
+ * if that is the case and if so don't look after the sc->args_size,
+ * but always after the full raw_syscalls:sys_enter payload, which is
+ * fixed.
+ *
+ * We'll revisit this later to pass s->args_size to the BPF augmenter
+ * (now tools/perf/examples/bpf/augmented_raw_syscalls.c, so that it
+ * copies only what we need for each syscall, like what happens when we
+ * use syscalls:sys_enter_NAME, so that we reduce the kernel/userspace
+ * traffic to just what is needed for each syscall.
+ */
+ int args_size = raw_augmented ? (8 * (int)sizeof(long)) : sc->args_size;
- *augmented_args_size = sample->raw_size - sc->args_size;
+ *augmented_args_size = sample->raw_size - args_size;
if (*augmented_args_size > 0)
- augmented_args = sample->raw_data + sc->args_size;
+ augmented_args = sample->raw_data + args_size;
return augmented_args;
}
@@ -1780,7 +1796,7 @@ static int trace__sys_enter(struct trace *trace, struct perf_evsel *evsel,
* here and avoid using augmented syscalls when the evsel is the raw_syscalls one.
*/
if (evsel != trace->syscalls.events.sys_enter)
- augmented_args = syscall__augmented_args(sc, sample, &augmented_args_size);
+ augmented_args = syscall__augmented_args(sc, sample, &augmented_args_size, trace->raw_augmented_syscalls);
ttrace->entry_time = sample->time;
msg = ttrace->entry_str;
printed += scnprintf(msg + printed, trace__entry_str_size - printed, "%s(", sc->name);
@@ -1833,7 +1849,7 @@ static int trace__fprintf_sys_enter(struct trace *trace, struct perf_evsel *evse
goto out_put;
args = perf_evsel__sc_tp_ptr(evsel, args, sample);
- augmented_args = syscall__augmented_args(sc, sample, &augmented_args_size);
+ augmented_args = syscall__augmented_args(sc, sample, &augmented_args_size, trace->raw_augmented_syscalls);
syscall__scnprintf_args(sc, msg, sizeof(msg), args, augmented_args, augmented_args_size, trace, thread);
fprintf(trace->output, "%s", msg);
err = 0;
@@ -3501,7 +3517,15 @@ int cmd_trace(int argc, const char **argv)
evsel->handler = trace__sys_enter;
evlist__for_each_entry(trace.evlist, evsel) {
+ bool raw_syscalls_sys_exit = strcmp(perf_evsel__name(evsel), "raw_syscalls:sys_exit") == 0;
+
+ if (raw_syscalls_sys_exit) {
+ trace.raw_augmented_syscalls = true;
+ goto init_augmented_syscall_tp;
+ }
+
if (strstarts(perf_evsel__name(evsel), "syscalls:sys_exit_")) {
+init_augmented_syscall_tp:
perf_evsel__init_augmented_syscall_tp(evsel);
perf_evsel__init_augmented_syscall_tp_ret(evsel);
evsel->handler = trace__sys_exit;
diff --git a/tools/perf/examples/bpf/augmented_raw_syscalls.c b/tools/perf/examples/bpf/augmented_raw_syscalls.c
new file mode 100644
index 0000000..90a1933
--- /dev/null
+++ b/tools/perf/examples/bpf/augmented_raw_syscalls.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Augment the raw_syscalls tracepoints with the contents of the pointer arguments.
+ *
+ * Test it with:
+ *
+ * perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c cat /etc/passwd > /dev/null
+ *
+ * This exactly matches what is marshalled into the raw_syscall:sys_enter
+ * payload expected by the 'perf trace' beautifiers.
+ *
+ * For now it just uses the existing tracepoint augmentation code in 'perf
+ * trace', in the next csets we'll hook up these with the sys_enter/sys_exit
+ * code that will combine entry/exit in a strace like way.
+ */
+
+#include <stdio.h>
+#include <linux/socket.h>
+
+/* bpf-output associated map */
+struct bpf_map SEC("maps") __augmented_syscalls__ = {
+ .type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
+ .key_size = sizeof(int),
+ .value_size = sizeof(u32),
+ .max_entries = __NR_CPUS__,
+};
+
+struct syscall_enter_args {
+ unsigned long long common_tp_fields;
+ long syscall_nr;
+ unsigned long args[6];
+};
+
+struct syscall_exit_args {
+ unsigned long long common_tp_fields;
+ long syscall_nr;
+ long ret;
+};
+
+struct augmented_filename {
+ unsigned int size;
+ int reserved;
+ char value[256];
+};
+
+#define SYS_OPEN 2
+#define SYS_OPENAT 257
+
+SEC("raw_syscalls:sys_enter")
+int sys_enter(struct syscall_enter_args *args)
+{
+ struct {
+ struct syscall_enter_args args;
+ struct augmented_filename filename;
+ } augmented_args;
+ unsigned int len = sizeof(augmented_args);
+ const void *filename_arg = NULL;
+
+ probe_read(&augmented_args.args, sizeof(augmented_args.args), args);
+ /*
+ * Yonghong and Edward Cree sayz:
+ *
+ * https://www.spinics.net/lists/netdev/msg531645.html
+ *
+ * >> R0=inv(id=0) R1=inv2 R6=ctx(id=0,off=0,imm=0) R7=inv64 R10=fp0,call_-1
+ * >> 10: (bf) r1 = r6
+ * >> 11: (07) r1 += 16
+ * >> 12: (05) goto pc+2
+ * >> 15: (79) r3 = *(u64 *)(r1 +0)
+ * >> dereference of modified ctx ptr R1 off=16 disallowed
+ * > Aha, we at least got a different error message this time.
+ * > And indeed llvm has done that optimisation, rather than the more obvious
+ * > 11: r3 = *(u64 *)(r1 +16)
+ * > because it wants to have lots of reads share a single insn. You may be able
+ * > to defeat that optimisation by adding compiler barriers, idk. Maybe someone
+ * > with llvm knowledge can figure out how to stop it (ideally, llvm would know
+ * > when it's generating for bpf backend and not do that). -O0? ¯\_(ツ)_/¯
+ *
+ * The optimization mostly likes below:
+ *
+ * br1:
+ * ...
+ * r1 += 16
+ * goto merge
+ * br2:
+ * ...
+ * r1 += 20
+ * goto merge
+ * merge:
+ * *(u64 *)(r1 + 0)
+ *
+ * The compiler tries to merge common loads. There is no easy way to
+ * stop this compiler optimization without turning off a lot of other
+ * optimizations. The easiest way is to add barriers:
+ *
+ * __asm__ __volatile__("": : :"memory")
+ *
+ * after the ctx memory access to prevent their down stream merging.
+ */
+ switch (augmented_args.args.syscall_nr) {
+ case SYS_OPEN: filename_arg = (const void *)args->args[0];
+ __asm__ __volatile__("": : :"memory");
+ break;
+ case SYS_OPENAT: filename_arg = (const void *)args->args[1];
+ break;
+ }
+
+ if (filename_arg != NULL) {
+ augmented_args.filename.reserved = 0;
+ augmented_args.filename.size = probe_read_str(&augmented_args.filename.value,
+ sizeof(augmented_args.filename.value),
+ filename_arg);
+ if (augmented_args.filename.size < sizeof(augmented_args.filename.value)) {
+ len -= sizeof(augmented_args.filename.value) - augmented_args.filename.size;
+ len &= sizeof(augmented_args.filename.value) - 1;
+ }
+ } else {
+ len = sizeof(augmented_args.args);
+ }
+
+ perf_event_output(args, &__augmented_syscalls__, BPF_F_CURRENT_CPU, &augmented_args, len);
+ return 0;
+}
+
+SEC("raw_syscalls:sys_exit")
+int sys_exit(struct syscall_exit_args *args)
+{
+ return 1; /* 0 as soon as we start copying data returned by the kernel, e.g. 'read' */
+}
+
+license(GPL);
diff --git a/tools/perf/jvmti/jvmti_agent.c b/tools/perf/jvmti/jvmti_agent.c
index ac1bcdc..f7eb63c 100644
--- a/tools/perf/jvmti/jvmti_agent.c
+++ b/tools/perf/jvmti/jvmti_agent.c
@@ -125,7 +125,7 @@ perf_get_timestamp(void)
}
static int
-debug_cache_init(void)
+create_jit_cache_dir(void)
{
char str[32];
char *base, *p;
@@ -144,8 +144,13 @@ debug_cache_init(void)
strftime(str, sizeof(str), JIT_LANG"-jit-%Y%m%d", &tm);
- snprintf(jit_path, PATH_MAX - 1, "%s/.debug/", base);
-
+ ret = snprintf(jit_path, PATH_MAX, "%s/.debug/", base);
+ if (ret >= PATH_MAX) {
+ warnx("jvmti: cannot generate jit cache dir because %s/.debug/"
+ " is too long, please check the cwd, JITDUMPDIR, and"
+ " HOME variables", base);
+ return -1;
+ }
ret = mkdir(jit_path, 0755);
if (ret == -1) {
if (errno != EEXIST) {
@@ -154,20 +159,32 @@ debug_cache_init(void)
}
}
- snprintf(jit_path, PATH_MAX - 1, "%s/.debug/jit", base);
+ ret = snprintf(jit_path, PATH_MAX, "%s/.debug/jit", base);
+ if (ret >= PATH_MAX) {
+ warnx("jvmti: cannot generate jit cache dir because"
+ " %s/.debug/jit is too long, please check the cwd,"
+ " JITDUMPDIR, and HOME variables", base);
+ return -1;
+ }
ret = mkdir(jit_path, 0755);
if (ret == -1) {
if (errno != EEXIST) {
- warn("cannot create jit cache dir %s", jit_path);
+ warn("jvmti: cannot create jit cache dir %s", jit_path);
return -1;
}
}
- snprintf(jit_path, PATH_MAX - 1, "%s/.debug/jit/%s.XXXXXXXX", base, str);
-
+ ret = snprintf(jit_path, PATH_MAX, "%s/.debug/jit/%s.XXXXXXXX", base, str);
+ if (ret >= PATH_MAX) {
+ warnx("jvmti: cannot generate jit cache dir because"
+ " %s/.debug/jit/%s.XXXXXXXX is too long, please check"
+ " the cwd, JITDUMPDIR, and HOME variables",
+ base, str);
+ return -1;
+ }
p = mkdtemp(jit_path);
if (p != jit_path) {
- warn("cannot create jit cache dir %s", jit_path);
+ warn("jvmti: cannot create jit cache dir %s", jit_path);
return -1;
}
@@ -228,7 +245,7 @@ void *jvmti_open(void)
{
char dump_path[PATH_MAX];
struct jitheader header;
- int fd;
+ int fd, ret;
FILE *fp;
init_arch_timestamp();
@@ -245,12 +262,22 @@ void *jvmti_open(void)
memset(&header, 0, sizeof(header));
- debug_cache_init();
+ /*
+ * jitdump file dir
+ */
+ if (create_jit_cache_dir() < 0)
+ return NULL;
/*
* jitdump file name
*/
- scnprintf(dump_path, PATH_MAX, "%s/jit-%i.dump", jit_path, getpid());
+ ret = snprintf(dump_path, PATH_MAX, "%s/jit-%i.dump", jit_path, getpid());
+ if (ret >= PATH_MAX) {
+ warnx("jvmti: cannot generate jitdump file full path because"
+ " %s/jit-%i.dump is too long, please check the cwd,"
+ " JITDUMPDIR, and HOME variables", jit_path, getpid());
+ return NULL;
+ }
fd = open(dump_path, O_CREAT|O_TRUNC|O_RDWR, 0666);
if (fd == -1)
diff --git a/tools/perf/scripts/python/exported-sql-viewer.py b/tools/perf/scripts/python/exported-sql-viewer.py
index 24cb0bd..f278ce5 100755
--- a/tools/perf/scripts/python/exported-sql-viewer.py
+++ b/tools/perf/scripts/python/exported-sql-viewer.py
@@ -119,6 +119,14 @@
return "[kernel]"
return name
+def findnth(s, sub, n, offs=0):
+ pos = s.find(sub)
+ if pos < 0:
+ return pos
+ if n <= 1:
+ return offs + pos
+ return findnth(s[pos + 1:], sub, n - 1, offs + pos + 1)
+
# Percent to one decimal place
def PercentToOneDP(n, d):
@@ -1464,6 +1472,317 @@
else:
self.find_bar.NotFound()
+# Dialog data item converted and validated using a SQL table
+
+class SQLTableDialogDataItem():
+
+ def __init__(self, glb, label, placeholder_text, table_name, match_column, column_name1, column_name2, parent):
+ self.glb = glb
+ self.label = label
+ self.placeholder_text = placeholder_text
+ self.table_name = table_name
+ self.match_column = match_column
+ self.column_name1 = column_name1
+ self.column_name2 = column_name2
+ self.parent = parent
+
+ self.value = ""
+
+ self.widget = QLineEdit()
+ self.widget.editingFinished.connect(self.Validate)
+ self.widget.textChanged.connect(self.Invalidate)
+ self.red = False
+ self.error = ""
+ self.validated = True
+
+ self.last_id = 0
+ self.first_time = 0
+ self.last_time = 2 ** 64
+ if self.table_name == "<timeranges>":
+ query = QSqlQuery(self.glb.db)
+ QueryExec(query, "SELECT id, time FROM samples ORDER BY id DESC LIMIT 1")
+ if query.next():
+ self.last_id = int(query.value(0))
+ self.last_time = int(query.value(1))
+ QueryExec(query, "SELECT time FROM samples WHERE time != 0 ORDER BY id LIMIT 1")
+ if query.next():
+ self.first_time = int(query.value(0))
+ if placeholder_text:
+ placeholder_text += ", between " + str(self.first_time) + " and " + str(self.last_time)
+
+ if placeholder_text:
+ self.widget.setPlaceholderText(placeholder_text)
+
+ def ValueToIds(self, value):
+ ids = []
+ query = QSqlQuery(self.glb.db)
+ stmt = "SELECT id FROM " + self.table_name + " WHERE " + self.match_column + " = '" + value + "'"
+ ret = query.exec_(stmt)
+ if ret:
+ while query.next():
+ ids.append(str(query.value(0)))
+ return ids
+
+ def IdBetween(self, query, lower_id, higher_id, order):
+ QueryExec(query, "SELECT id FROM samples WHERE id > " + str(lower_id) + " AND id < " + str(higher_id) + " ORDER BY id " + order + " LIMIT 1")
+ if query.next():
+ return True, int(query.value(0))
+ else:
+ return False, 0
+
+ def BinarySearchTime(self, lower_id, higher_id, target_time, get_floor):
+ query = QSqlQuery(self.glb.db)
+ while True:
+ next_id = int((lower_id + higher_id) / 2)
+ QueryExec(query, "SELECT time FROM samples WHERE id = " + str(next_id))
+ if not query.next():
+ ok, dbid = self.IdBetween(query, lower_id, next_id, "DESC")
+ if not ok:
+ ok, dbid = self.IdBetween(query, next_id, higher_id, "")
+ if not ok:
+ return str(higher_id)
+ next_id = dbid
+ QueryExec(query, "SELECT time FROM samples WHERE id = " + str(next_id))
+ next_time = int(query.value(0))
+ if get_floor:
+ if target_time > next_time:
+ lower_id = next_id
+ else:
+ higher_id = next_id
+ if higher_id <= lower_id + 1:
+ return str(higher_id)
+ else:
+ if target_time >= next_time:
+ lower_id = next_id
+ else:
+ higher_id = next_id
+ if higher_id <= lower_id + 1:
+ return str(lower_id)
+
+ def ConvertRelativeTime(self, val):
+ print "val ", val
+ mult = 1
+ suffix = val[-2:]
+ if suffix == "ms":
+ mult = 1000000
+ elif suffix == "us":
+ mult = 1000
+ elif suffix == "ns":
+ mult = 1
+ else:
+ return val
+ val = val[:-2].strip()
+ if not self.IsNumber(val):
+ return val
+ val = int(val) * mult
+ if val >= 0:
+ val += self.first_time
+ else:
+ val += self.last_time
+ return str(val)
+
+ def ConvertTimeRange(self, vrange):
+ print "vrange ", vrange
+ if vrange[0] == "":
+ vrange[0] = str(self.first_time)
+ if vrange[1] == "":
+ vrange[1] = str(self.last_time)
+ vrange[0] = self.ConvertRelativeTime(vrange[0])
+ vrange[1] = self.ConvertRelativeTime(vrange[1])
+ print "vrange2 ", vrange
+ if not self.IsNumber(vrange[0]) or not self.IsNumber(vrange[1]):
+ return False
+ print "ok1"
+ beg_range = max(int(vrange[0]), self.first_time)
+ end_range = min(int(vrange[1]), self.last_time)
+ if beg_range > self.last_time or end_range < self.first_time:
+ return False
+ print "ok2"
+ vrange[0] = self.BinarySearchTime(0, self.last_id, beg_range, True)
+ vrange[1] = self.BinarySearchTime(1, self.last_id + 1, end_range, False)
+ print "vrange3 ", vrange
+ return True
+
+ def AddTimeRange(self, value, ranges):
+ print "value ", value
+ n = value.count("-")
+ if n == 1:
+ pass
+ elif n == 2:
+ if value.split("-")[1].strip() == "":
+ n = 1
+ elif n == 3:
+ n = 2
+ else:
+ return False
+ pos = findnth(value, "-", n)
+ vrange = [value[:pos].strip() ,value[pos+1:].strip()]
+ if self.ConvertTimeRange(vrange):
+ ranges.append(vrange)
+ return True
+ return False
+
+ def InvalidValue(self, value):
+ self.value = ""
+ palette = QPalette()
+ palette.setColor(QPalette.Text,Qt.red)
+ self.widget.setPalette(palette)
+ self.red = True
+ self.error = self.label + " invalid value '" + value + "'"
+ self.parent.ShowMessage(self.error)
+
+ def IsNumber(self, value):
+ try:
+ x = int(value)
+ except:
+ x = 0
+ return str(x) == value
+
+ def Invalidate(self):
+ self.validated = False
+
+ def Validate(self):
+ input_string = self.widget.text()
+ self.validated = True
+ if self.red:
+ palette = QPalette()
+ self.widget.setPalette(palette)
+ self.red = False
+ if not len(input_string.strip()):
+ self.error = ""
+ self.value = ""
+ return
+ if self.table_name == "<timeranges>":
+ ranges = []
+ for value in [x.strip() for x in input_string.split(",")]:
+ if not self.AddTimeRange(value, ranges):
+ return self.InvalidValue(value)
+ ranges = [("(" + self.column_name1 + " >= " + r[0] + " AND " + self.column_name1 + " <= " + r[1] + ")") for r in ranges]
+ self.value = " OR ".join(ranges)
+ elif self.table_name == "<ranges>":
+ singles = []
+ ranges = []
+ for value in [x.strip() for x in input_string.split(",")]:
+ if "-" in value:
+ vrange = value.split("-")
+ if len(vrange) != 2 or not self.IsNumber(vrange[0]) or not self.IsNumber(vrange[1]):
+ return self.InvalidValue(value)
+ ranges.append(vrange)
+ else:
+ if not self.IsNumber(value):
+ return self.InvalidValue(value)
+ singles.append(value)
+ ranges = [("(" + self.column_name1 + " >= " + r[0] + " AND " + self.column_name1 + " <= " + r[1] + ")") for r in ranges]
+ if len(singles):
+ ranges.append(self.column_name1 + " IN (" + ",".join(singles) + ")")
+ self.value = " OR ".join(ranges)
+ elif self.table_name:
+ all_ids = []
+ for value in [x.strip() for x in input_string.split(",")]:
+ ids = self.ValueToIds(value)
+ if len(ids):
+ all_ids.extend(ids)
+ else:
+ return self.InvalidValue(value)
+ self.value = self.column_name1 + " IN (" + ",".join(all_ids) + ")"
+ if self.column_name2:
+ self.value = "( " + self.value + " OR " + self.column_name2 + " IN (" + ",".join(all_ids) + ") )"
+ else:
+ self.value = input_string.strip()
+ self.error = ""
+ self.parent.ClearMessage()
+
+ def IsValid(self):
+ if not self.validated:
+ self.Validate()
+ if len(self.error):
+ self.parent.ShowMessage(self.error)
+ return False
+ return True
+
+# Selected branch report creation dialog
+
+class SelectedBranchDialog(QDialog):
+
+ def __init__(self, glb, parent=None):
+ super(SelectedBranchDialog, self).__init__(parent)
+
+ self.glb = glb
+
+ self.name = ""
+ self.where_clause = ""
+
+ self.setWindowTitle("Selected Branches")
+ self.setMinimumWidth(600)
+
+ items = (
+ ("Report name:", "Enter a name to appear in the window title bar", "", "", "", ""),
+ ("Time ranges:", "Enter time ranges", "<timeranges>", "", "samples.id", ""),
+ ("CPUs:", "Enter CPUs or ranges e.g. 0,5-6", "<ranges>", "", "cpu", ""),
+ ("Commands:", "Only branches with these commands will be included", "comms", "comm", "comm_id", ""),
+ ("PIDs:", "Only branches with these process IDs will be included", "threads", "pid", "thread_id", ""),
+ ("TIDs:", "Only branches with these thread IDs will be included", "threads", "tid", "thread_id", ""),
+ ("DSOs:", "Only branches with these DSOs will be included", "dsos", "short_name", "samples.dso_id", "to_dso_id"),
+ ("Symbols:", "Only branches with these symbols will be included", "symbols", "name", "symbol_id", "to_symbol_id"),
+ ("Raw SQL clause: ", "Enter a raw SQL WHERE clause", "", "", "", ""),
+ )
+ self.data_items = [SQLTableDialogDataItem(glb, *x, parent=self) for x in items]
+
+ self.grid = QGridLayout()
+
+ for row in xrange(len(self.data_items)):
+ self.grid.addWidget(QLabel(self.data_items[row].label), row, 0)
+ self.grid.addWidget(self.data_items[row].widget, row, 1)
+
+ self.status = QLabel()
+
+ self.ok_button = QPushButton("Ok", self)
+ self.ok_button.setDefault(True)
+ self.ok_button.released.connect(self.Ok)
+ self.ok_button.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
+
+ self.cancel_button = QPushButton("Cancel", self)
+ self.cancel_button.released.connect(self.reject)
+ self.cancel_button.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
+
+ self.hbox = QHBoxLayout()
+ #self.hbox.addStretch()
+ self.hbox.addWidget(self.status)
+ self.hbox.addWidget(self.ok_button)
+ self.hbox.addWidget(self.cancel_button)
+
+ self.vbox = QVBoxLayout()
+ self.vbox.addLayout(self.grid)
+ self.vbox.addLayout(self.hbox)
+
+ self.setLayout(self.vbox);
+
+ def Ok(self):
+ self.name = self.data_items[0].value
+ if not self.name:
+ self.ShowMessage("Report name is required")
+ return
+ for d in self.data_items:
+ if not d.IsValid():
+ return
+ for d in self.data_items[1:]:
+ if len(d.value):
+ if len(self.where_clause):
+ self.where_clause += " AND "
+ self.where_clause += d.value
+ if len(self.where_clause):
+ self.where_clause = " AND ( " + self.where_clause + " ) "
+ else:
+ self.ShowMessage("No selection")
+ return
+ self.accept()
+
+ def ShowMessage(self, msg):
+ self.status.setText("<font color=#FF0000>" + msg)
+
+ def ClearMessage(self):
+ self.status.setText("")
+
# Event list
def GetEventList(db):
@@ -1656,7 +1975,7 @@
def FindDone(self, row):
self.find_bar.Idle()
if row >= 0:
- self.view.setCurrentIndex(self.model.index(row, 0, QModelIndex()))
+ self.view.setCurrentIndex(self.model.mapFromSource(self.data_model.index(row, 0, QModelIndex())))
else:
self.find_bar.NotFound()
@@ -1765,6 +2084,149 @@
def setActiveSubWindow(self, nr):
self.mdi_area.setActiveSubWindow(self.mdi_area.subWindowList()[nr - 1])
+# Help text
+
+glb_help_text = """
+<h1>Contents</h1>
+<style>
+p.c1 {
+ text-indent: 40px;
+}
+p.c2 {
+ text-indent: 80px;
+}
+}
+</style>
+<p class=c1><a href=#reports>1. Reports</a></p>
+<p class=c2><a href=#callgraph>1.1 Context-Sensitive Call Graph</a></p>
+<p class=c2><a href=#allbranches>1.2 All branches</a></p>
+<p class=c2><a href=#selectedbranches>1.3 Selected branches</a></p>
+<p class=c1><a href=#tables>2. Tables</a></p>
+<h1 id=reports>1. Reports</h1>
+<h2 id=callgraph>1.1 Context-Sensitive Call Graph</h2>
+The result is a GUI window with a tree representing a context-sensitive
+call-graph. Expanding a couple of levels of the tree and adjusting column
+widths to suit will display something like:
+<pre>
+ Call Graph: pt_example
+Call Path Object Count Time(ns) Time(%) Branch Count Branch Count(%)
+v- ls
+ v- 2638:2638
+ v- _start ld-2.19.so 1 10074071 100.0 211135 100.0
+ |- unknown unknown 1 13198 0.1 1 0.0
+ >- _dl_start ld-2.19.so 1 1400980 13.9 19637 9.3
+ >- _d_linit_internal ld-2.19.so 1 448152 4.4 11094 5.3
+ v-__libc_start_main@plt ls 1 8211741 81.5 180397 85.4
+ >- _dl_fixup ld-2.19.so 1 7607 0.1 108 0.1
+ >- __cxa_atexit libc-2.19.so 1 11737 0.1 10 0.0
+ >- __libc_csu_init ls 1 10354 0.1 10 0.0
+ |- _setjmp libc-2.19.so 1 0 0.0 4 0.0
+ v- main ls 1 8182043 99.6 180254 99.9
+</pre>
+<h3>Points to note:</h3>
+<ul>
+<li>The top level is a command name (comm)</li>
+<li>The next level is a thread (pid:tid)</li>
+<li>Subsequent levels are functions</li>
+<li>'Count' is the number of calls</li>
+<li>'Time' is the elapsed time until the function returns</li>
+<li>Percentages are relative to the level above</li>
+<li>'Branch Count' is the total number of branches for that function and all functions that it calls
+</ul>
+<h3>Find</h3>
+Ctrl-F displays a Find bar which finds function names by either an exact match or a pattern match.
+The pattern matching symbols are ? for any character and * for zero or more characters.
+<h2 id=allbranches>1.2 All branches</h2>
+The All branches report displays all branches in chronological order.
+Not all data is fetched immediately. More records can be fetched using the Fetch bar provided.
+<h3>Disassembly</h3>
+Open a branch to display disassembly. This only works if:
+<ol>
+<li>The disassembler is available. Currently, only Intel XED is supported - see <a href=#xed>Intel XED Setup</a></li>
+<li>The object code is available. Currently, only the perf build ID cache is searched for object code.
+The default directory ~/.debug can be overridden by setting environment variable PERF_BUILDID_DIR.
+One exception is kcore where the DSO long name is used (refer dsos_view on the Tables menu),
+or alternatively, set environment variable PERF_KCORE to the kcore file name.</li>
+</ol>
+<h4 id=xed>Intel XED Setup</h4>
+To use Intel XED, libxed.so must be present. To build and install libxed.so:
+<pre>
+git clone https://github.com/intelxed/mbuild.git mbuild
+git clone https://github.com/intelxed/xed
+cd xed
+./mfile.py --share
+sudo ./mfile.py --prefix=/usr/local install
+sudo ldconfig
+</pre>
+<h3>Find</h3>
+Ctrl-F displays a Find bar which finds substrings by either an exact match or a regular expression match.
+Refer to Python documentation for the regular expression syntax.
+All columns are searched, but only currently fetched rows are searched.
+<h2 id=selectedbranches>1.3 Selected branches</h2>
+This is the same as the <a href=#allbranches>All branches</a> report but with the data reduced
+by various selection criteria. A dialog box displays available criteria which are AND'ed together.
+<h3>1.3.1 Time ranges</h3>
+The time ranges hint text shows the total time range. Relative time ranges can also be entered in
+ms, us or ns. Also, negative values are relative to the end of trace. Examples:
+<pre>
+ 81073085947329-81073085958238 From 81073085947329 to 81073085958238
+ 100us-200us From 100us to 200us
+ 10ms- From 10ms to the end
+ -100ns The first 100ns
+ -10ms- The last 10ms
+</pre>
+N.B. Due to the granularity of timestamps, there could be no branches in any given time range.
+<h1 id=tables>2. Tables</h1>
+The Tables menu shows all tables and views in the database. Most tables have an associated view
+which displays the information in a more friendly way. Not all data for large tables is fetched
+immediately. More records can be fetched using the Fetch bar provided. Columns can be sorted,
+but that can be slow for large tables.
+<p>There are also tables of database meta-information.
+For SQLite3 databases, the sqlite_master table is included.
+For PostgreSQL databases, information_schema.tables/views/columns are included.
+<h3>Find</h3>
+Ctrl-F displays a Find bar which finds substrings by either an exact match or a regular expression match.
+Refer to Python documentation for the regular expression syntax.
+All columns are searched, but only currently fetched rows are searched.
+<p>N.B. Results are found in id order, so if the table is re-ordered, find-next and find-previous
+will go to the next/previous result in id order, instead of display order.
+"""
+
+# Help window
+
+class HelpWindow(QMdiSubWindow):
+
+ def __init__(self, glb, parent=None):
+ super(HelpWindow, self).__init__(parent)
+
+ self.text = QTextBrowser()
+ self.text.setHtml(glb_help_text)
+ self.text.setReadOnly(True)
+ self.text.setOpenExternalLinks(True)
+
+ self.setWidget(self.text)
+
+ AddSubWindow(glb.mainwindow.mdi_area, self, "Exported SQL Viewer Help")
+
+# Main window that only displays the help text
+
+class HelpOnlyWindow(QMainWindow):
+
+ def __init__(self, parent=None):
+ super(HelpOnlyWindow, self).__init__(parent)
+
+ self.setMinimumSize(200, 100)
+ self.resize(800, 600)
+ self.setWindowTitle("Exported SQL Viewer Help")
+ self.setWindowIcon(self.style().standardIcon(QStyle.SP_MessageBoxInformation))
+
+ self.text = QTextBrowser()
+ self.text.setHtml(glb_help_text)
+ self.text.setReadOnly(True)
+ self.text.setOpenExternalLinks(True)
+
+ self.setCentralWidget(self.text)
+
# Font resize
def ResizeFont(widget, diff):
@@ -1851,6 +2313,9 @@
self.window_menu = WindowMenu(self.mdi_area, menu)
+ help_menu = menu.addMenu("&Help")
+ help_menu.addAction(CreateAction("&Exported SQL Viewer Help", "Helpful information", self.Help, self, QKeySequence.HelpContents))
+
def Find(self):
win = self.mdi_area.activeSubWindow()
if win:
@@ -1888,6 +2353,8 @@
if event == "branches":
label = "All branches" if branches_events == 1 else "All branches " + "(id=" + dbid + ")"
reports_menu.addAction(CreateAction(label, "Create a new window displaying branch events", lambda x=dbid: self.NewBranchView(x), self))
+ label = "Selected branches" if branches_events == 1 else "Selected branches " + "(id=" + dbid + ")"
+ reports_menu.addAction(CreateAction(label, "Create a new window displaying branch events", lambda x=dbid: self.NewSelectedBranchView(x), self))
def TableMenu(self, tables, menu):
table_menu = menu.addMenu("&Tables")
@@ -1900,9 +2367,18 @@
def NewBranchView(self, event_id):
BranchWindow(self.glb, event_id, "", "", self)
+ def NewSelectedBranchView(self, event_id):
+ dialog = SelectedBranchDialog(self.glb, self)
+ ret = dialog.exec_()
+ if ret:
+ BranchWindow(self.glb, event_id, dialog.name, dialog.where_clause, self)
+
def NewTableView(self, table_name):
TableWindow(self.glb, table_name, self)
+ def Help(self):
+ HelpWindow(self.glb, self)
+
# XED Disassembler
class xed_state_t(Structure):
@@ -1929,7 +2405,12 @@
class LibXED():
def __init__(self):
- self.libxed = CDLL("libxed.so")
+ try:
+ self.libxed = CDLL("libxed.so")
+ except:
+ self.libxed = None
+ if not self.libxed:
+ self.libxed = CDLL("/usr/local/lib/libxed.so")
self.xed_tables_init = self.libxed.xed_tables_init
self.xed_tables_init.restype = None
@@ -2097,10 +2578,16 @@
def Main():
if (len(sys.argv) < 2):
- print >> sys.stderr, "Usage is: exported-sql-viewer.py <database name>"
+ print >> sys.stderr, "Usage is: exported-sql-viewer.py {<database name> | --help-only}"
raise Exception("Too few arguments")
dbname = sys.argv[1]
+ if dbname == "--help-only":
+ app = QApplication(sys.argv)
+ mainwindow = HelpOnlyWindow()
+ mainwindow.show()
+ err = app.exec_()
+ sys.exit(err)
is_sqlite3 = False
try:
diff --git a/tools/perf/tests/attr/test-record-group-sampling b/tools/perf/tests/attr/test-record-group-sampling
index 8a33ca4..f0729c45 100644
--- a/tools/perf/tests/attr/test-record-group-sampling
+++ b/tools/perf/tests/attr/test-record-group-sampling
@@ -37,4 +37,3 @@
sample_period=0
freq=0
write_backward=0
-sample_id_all=0
diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
index e88e6f9..668d2a9 100644
--- a/tools/perf/util/evlist.c
+++ b/tools/perf/util/evlist.c
@@ -1810,3 +1810,30 @@ void perf_evlist__force_leader(struct perf_evlist *evlist)
leader->forced_leader = true;
}
}
+
+struct perf_evsel *perf_evlist__reset_weak_group(struct perf_evlist *evsel_list,
+ struct perf_evsel *evsel)
+{
+ struct perf_evsel *c2, *leader;
+ bool is_open = true;
+
+ leader = evsel->leader;
+ pr_debug("Weak group for %s/%d failed\n",
+ leader->name, leader->nr_members);
+
+ /*
+ * for_each_group_member doesn't work here because it doesn't
+ * include the first entry.
+ */
+ evlist__for_each_entry(evsel_list, c2) {
+ if (c2 == evsel)
+ is_open = false;
+ if (c2->leader == leader) {
+ if (is_open)
+ perf_evsel__close(c2);
+ c2->leader = c2;
+ c2->nr_members = 0;
+ }
+ }
+ return leader;
+}
diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h
index dc66436..9919eed 100644
--- a/tools/perf/util/evlist.h
+++ b/tools/perf/util/evlist.h
@@ -312,4 +312,7 @@ bool perf_evlist__exclude_kernel(struct perf_evlist *evlist);
void perf_evlist__force_leader(struct perf_evlist *evlist);
+struct perf_evsel *perf_evlist__reset_weak_group(struct perf_evlist *evlist,
+ struct perf_evsel *evsel);
+
#endif /* __PERF_EVLIST_H */
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index 6d18705..d37bb15 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -956,7 +956,6 @@ void perf_evsel__config(struct perf_evsel *evsel, struct record_opts *opts,
attr->sample_freq = 0;
attr->sample_period = 0;
attr->write_backward = 0;
- attr->sample_id_all = 0;
}
if (opts->no_samples)
diff --git a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
index 58f6a9c..4503f3c 100644
--- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
+++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
@@ -1474,6 +1474,8 @@ static void intel_pt_calc_mtc_timestamp(struct intel_pt_decoder *decoder)
decoder->have_calc_cyc_to_tsc = false;
intel_pt_calc_cyc_to_tsc(decoder, true);
}
+
+ intel_pt_log_to("Setting timestamp", decoder->timestamp);
}
static void intel_pt_calc_cbr(struct intel_pt_decoder *decoder)
@@ -1514,6 +1516,8 @@ static void intel_pt_calc_cyc_timestamp(struct intel_pt_decoder *decoder)
decoder->timestamp = timestamp;
decoder->timestamp_insn_cnt = 0;
+
+ intel_pt_log_to("Setting timestamp", decoder->timestamp);
}
/* Walk PSB+ packets when already in sync. */
diff --git a/tools/perf/util/intel-pt-decoder/intel-pt-log.c b/tools/perf/util/intel-pt-decoder/intel-pt-log.c
index e02bc7b..5e64da27 100644
--- a/tools/perf/util/intel-pt-decoder/intel-pt-log.c
+++ b/tools/perf/util/intel-pt-decoder/intel-pt-log.c
@@ -31,6 +31,11 @@ static FILE *f;
static char log_name[MAX_LOG_NAME];
bool intel_pt_enable_logging;
+void *intel_pt_log_fp(void)
+{
+ return f;
+}
+
void intel_pt_log_enable(void)
{
intel_pt_enable_logging = true;
diff --git a/tools/perf/util/intel-pt-decoder/intel-pt-log.h b/tools/perf/util/intel-pt-decoder/intel-pt-log.h
index 45b64f9..cc08493 100644
--- a/tools/perf/util/intel-pt-decoder/intel-pt-log.h
+++ b/tools/perf/util/intel-pt-decoder/intel-pt-log.h
@@ -22,6 +22,7 @@
struct intel_pt_pkt;
+void *intel_pt_log_fp(void);
void intel_pt_log_enable(void);
void intel_pt_log_disable(void);
void intel_pt_log_set_name(const char *name);
diff --git a/tools/perf/util/intel-pt.c b/tools/perf/util/intel-pt.c
index 86cc9a6..149ff36 100644
--- a/tools/perf/util/intel-pt.c
+++ b/tools/perf/util/intel-pt.c
@@ -206,6 +206,16 @@ static void intel_pt_dump_event(struct intel_pt *pt, unsigned char *buf,
intel_pt_dump(pt, buf, len);
}
+static void intel_pt_log_event(union perf_event *event)
+{
+ FILE *f = intel_pt_log_fp();
+
+ if (!intel_pt_enable_logging || !f)
+ return;
+
+ perf_event__fprintf(event, f);
+}
+
static int intel_pt_do_fix_overlap(struct intel_pt *pt, struct auxtrace_buffer *a,
struct auxtrace_buffer *b)
{
@@ -2010,9 +2020,9 @@ static int intel_pt_process_event(struct perf_session *session,
event->header.type == PERF_RECORD_SWITCH_CPU_WIDE)
err = intel_pt_context_switch(pt, event, sample);
- intel_pt_log("event %s (%u): cpu %d time %"PRIu64" tsc %#"PRIx64"\n",
- perf_event__name(event->header.type), event->header.type,
- sample->cpu, sample->time, timestamp);
+ intel_pt_log("event %u: cpu %d time %"PRIu64" tsc %#"PRIx64" ",
+ event->header.type, sample->cpu, sample->time, timestamp);
+ intel_pt_log_event(event);
return err;
}
diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c
index 7799788..7e49baa 100644
--- a/tools/perf/util/pmu.c
+++ b/tools/perf/util/pmu.c
@@ -773,7 +773,7 @@ static void pmu_add_cpu_aliases(struct list_head *head, struct perf_pmu *pmu)
if (!is_arm_pmu_core(name)) {
pname = pe->pmu ? pe->pmu : "cpu";
- if (strncmp(pname, name, strlen(pname)))
+ if (strcmp(pname, name))
continue;
}
