google_bms: adapter auth priority
Increase priority of adapter auth state, clarify some other states.
Bug: 230510913
Signed-off-by: AleX Pelosi <[email protected]>
Change-Id: I3263e2527b0b05098d19665274260c7247e1e0d7
diff --git a/google_bms.h b/google_bms.h
index 86a6b67..5d1522b 100644
--- a/google_bms.h
+++ b/google_bms.h
@@ -531,28 +531,28 @@
CSI_TYPE_None = 0, // Disconnected
CSI_TYPE_Fault = 1, // Internal Failures
- CSI_TYPE_JEITA = 2, // HW limits
+ CSI_TYPE_JEITA = 2, // HW limits (will have HOT or COLD)
CSI_TYPE_LongLife = 3, // DefenderConditions
CSI_TYPE_Adaptive = 4, // AdaptiveCharging
- CSI_TYPE_Normal = 5,
+ CSI_TYPE_Normal = 5, // All Good
};
enum csi_status {
CSI_STATUS_UNKNOWN = -1,
- CSI_STATUS_Health_Cold = 10, // JEITA battery, mutex with Hot
- CSI_STATUS_Health_Hot = 11, // JEITA battery, mutex with Cold
- CSI_STATUS_System_Thermals = 20,//
- CSI_STATUS_System_Load = 21, // Load will eventually become thermals
- CSI_STATUS_Adapter_Power = 30, //
- CSI_STATUS_Adapter_Quality = 31,// Adapter or cable (low voltage)
- CSI_STATUS_Adapter_Auth = 32, // Missing authentication (if supported)
+ CSI_STATUS_Health_Cold = 10, // battery temperature not nominal
+ CSI_STATUS_Health_Hot = 11, // battery temperature not nominal
+ CSI_STATUS_System_Thermals = 20,// Thermal engine
+ CSI_STATUS_System_Load = 21, // Load might eventually become thermals
+ CSI_STATUS_Adapter_Auth = 30, // During authentication
+ CSI_STATUS_Adapter_Power = 31, // Low power adapter
+ CSI_STATUS_Adapter_Quality = 32,// Adapter or cable (low input voltage)
CSI_STATUS_Defender_Temp = 40, // TEMP Defend
CSI_STATUS_Defender_Dwell = 41, // DWELL Defend
CSI_STATUS_Defender_Trickle = 42,
CSI_STATUS_Defender_Dock = 43, // Dock Defend
- CSI_STATUS_Discharging = 100, // There will be a more specific reason
- CSI_STATUS_Normal = 200, //
+ CSI_STATUS_NotCharging = 100, // There will be a more specific reason
+ CSI_STATUS_Charging = 200, // All good
};
#endif /* __GOOGLE_BMS_H_ */
