Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c
new file mode 100644
index 0000000..30462e7
--- /dev/null
+++ b/arch/mips/momentum/jaguar_atx/setup.c
@@ -0,0 +1,474 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Momentum Computer Jaguar-ATX board dependent boot routines
+ *
+ * Copyright (C) 1996, 1997, 2001, 2004 Ralf Baechle ([email protected])
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Copyright (C) 2001 Red Hat, Inc.
+ * Copyright (C) 2002 Momentum Computer
+ *
+ * Author: Matthew Dharm, Momentum Computer
+ * [email protected]
+ *
+ * Louis Hamilton, Red Hat, Inc.
+ * [email protected] [MIPS64 modifications]
+ *
+ * Author: RidgeRun, Inc.
+ * [email protected], [email protected], [email protected]
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: [email protected] or [email protected]
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/bcd.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/swap.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/vmalloc.h>
+#include <asm/time.h>
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/reboot.h>
+#include <asm/tlbflush.h>
+#include <asm/mv64340.h>
+
+#include "jaguar_atx_fpga.h"
+
+extern unsigned long mv64340_sram_base;
+unsigned long cpu_clock;
+
+/* These functions are used for rebooting or halting the machine*/
+extern void momenco_jaguar_restart(char *command);
+extern void momenco_jaguar_halt(void);
+extern void momenco_jaguar_power_off(void);
+
+void momenco_time_init(void);
+
+static char reset_reason;
+
+static inline unsigned long ENTRYLO(unsigned long paddr)
+{
+ return ((paddr & PAGE_MASK) |
+ (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL |
+ _CACHE_UNCACHED)) >> 6;
+}
+
+void __init bus_error_init(void) { /* nothing */ }
+
+/*
+ * Load a few TLB entries for the MV64340 and perhiperals. The MV64340 is going
+ * to be hit on every IRQ anyway - there's absolutely no point in letting it be
+ * a random TLB entry, as it'll just cause needless churning of the TLB. And we
+ * use the other half for the serial port, which is just a PITA otherwise :)
+ *
+ * Device Physical Virtual
+ * MV64340 Internal Regs 0xf4000000 0xf4000000
+ * Ocelot-C[S] PLD (CS0) 0xfc000000 0xfc000000
+ * NVRAM (CS1) 0xfc800000 0xfc800000
+ * UARTs (CS2) 0xfd000000 0xfd000000
+ * Internal SRAM 0xfe000000 0xfe000000
+ * M-Systems DOC (CS3) 0xff000000 0xff000000
+ */
+
+static __init void wire_stupidity_into_tlb(void)
+{
+#ifdef CONFIG_MIPS32
+ write_c0_wired(0);
+ local_flush_tlb_all();
+
+ /* marvell and extra space */
+ add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000),
+ 0xf4000000UL, PM_64K);
+ /* fpga, rtc, and uart */
+ add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000),
+ 0xfc000000UL, PM_16M);
+// /* m-sys and internal SRAM */
+// add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000),
+// 0xfe000000UL, PM_16M);
+
+ marvell_base = 0xf4000000;
+ //mv64340_sram_base = 0xfe000000; /* Currently unused */
+#endif
+}
+
+unsigned long marvell_base = 0xf4000000L;
+unsigned long ja_fpga_base = JAGUAR_ATX_CS0_ADDR;
+unsigned long uart_base = 0xfd000000L;
+static unsigned char *rtc_base = (unsigned char*) 0xfc800000L;
+
+EXPORT_SYMBOL(marvell_base);
+
+static __init int per_cpu_mappings(void)
+{
+ marvell_base = (unsigned long) ioremap(0xf4000000, 0x10000);
+ ja_fpga_base = (unsigned long) ioremap(JAGUAR_ATX_CS0_ADDR, 0x1000);
+ uart_base = (unsigned long) ioremap(0xfd000000UL, 0x1000);
+ rtc_base = ioremap(0xfc000000UL, 0x8000);
+ // ioremap(0xfe000000, 32 << 20);
+ write_c0_wired(0);
+ local_flush_tlb_all();
+ ja_setup_console();
+
+ return 0;
+}
+arch_initcall(per_cpu_mappings);
+
+unsigned long m48t37y_get_time(void)
+{
+ unsigned int year, month, day, hour, min, sec;
+
+ /* stop the update */
+ rtc_base[0x7ff8] = 0x40;
+
+ year = BCD2BIN(rtc_base[0x7fff]);
+ year += BCD2BIN(rtc_base[0x7ff1]) * 100;
+
+ month = BCD2BIN(rtc_base[0x7ffe]);
+
+ day = BCD2BIN(rtc_base[0x7ffd]);
+
+ hour = BCD2BIN(rtc_base[0x7ffb]);
+ min = BCD2BIN(rtc_base[0x7ffa]);
+ sec = BCD2BIN(rtc_base[0x7ff9]);
+
+ /* start the update */
+ rtc_base[0x7ff8] = 0x00;
+
+ return mktime(year, month, day, hour, min, sec);
+}
+
+int m48t37y_set_time(unsigned long sec)
+{
+ struct rtc_time tm;
+
+ /* convert to a more useful format -- note months count from 0 */
+ to_tm(sec, &tm);
+ tm.tm_mon += 1;
+
+ /* enable writing */
+ rtc_base[0x7ff8] = 0x80;
+
+ /* year */
+ rtc_base[0x7fff] = BIN2BCD(tm.tm_year % 100);
+ rtc_base[0x7ff1] = BIN2BCD(tm.tm_year / 100);
+
+ /* month */
+ rtc_base[0x7ffe] = BIN2BCD(tm.tm_mon);
+
+ /* day */
+ rtc_base[0x7ffd] = BIN2BCD(tm.tm_mday);
+
+ /* hour/min/sec */
+ rtc_base[0x7ffb] = BIN2BCD(tm.tm_hour);
+ rtc_base[0x7ffa] = BIN2BCD(tm.tm_min);
+ rtc_base[0x7ff9] = BIN2BCD(tm.tm_sec);
+
+ /* day of week -- not really used, but let's keep it up-to-date */
+ rtc_base[0x7ffc] = BIN2BCD(tm.tm_wday + 1);
+
+ /* disable writing */
+ rtc_base[0x7ff8] = 0x00;
+
+ return 0;
+}
+
+void momenco_timer_setup(struct irqaction *irq)
+{
+ setup_irq(8, irq);
+}
+
+/*
+ * Ugly but the least of all evils. TLB initialization did flush the TLB so
+ * We need to setup mappings again before we can touch the RTC.
+ */
+void momenco_time_init(void)
+{
+ wire_stupidity_into_tlb();
+
+ mips_hpt_frequency = cpu_clock / 2;
+ board_timer_setup = momenco_timer_setup;
+
+ rtc_get_time = m48t37y_get_time;
+ rtc_set_time = m48t37y_set_time;
+}
+
+static struct resource mv_pci_io_mem0_resource = {
+ .name = "MV64340 PCI0 IO MEM",
+ .flags = IORESOURCE_IO
+};
+
+static struct resource mv_pci_mem0_resource = {
+ .name = "MV64340 PCI0 MEM",
+ .flags = IORESOURCE_MEM
+};
+
+static struct mv_pci_controller mv_bus0_controller = {
+ .pcic = {
+ .pci_ops = &mv_pci_ops,
+ .mem_resource = &mv_pci_mem0_resource,
+ .io_resource = &mv_pci_io_mem0_resource,
+ },
+ .config_addr = MV64340_PCI_0_CONFIG_ADDR,
+ .config_vreg = MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG,
+};
+
+static uint32_t mv_io_base, mv_io_size;
+
+static void ja_pci0_init(void)
+{
+ uint32_t mem0_base, mem0_size;
+ uint32_t io_base, io_size;
+
+ io_base = MV_READ(MV64340_PCI_0_IO_BASE_ADDR) << 16;
+ io_size = (MV_READ(MV64340_PCI_0_IO_SIZE) + 1) << 16;
+ mem0_base = MV_READ(MV64340_PCI_0_MEMORY0_BASE_ADDR) << 16;
+ mem0_size = (MV_READ(MV64340_PCI_0_MEMORY0_SIZE) + 1) << 16;
+
+ mv_pci_io_mem0_resource.start = 0;
+ mv_pci_io_mem0_resource.end = io_size - 1;
+ mv_pci_mem0_resource.start = mem0_base;
+ mv_pci_mem0_resource.end = mem0_base + mem0_size - 1;
+ mv_bus0_controller.pcic.mem_offset = mem0_base;
+ mv_bus0_controller.pcic.io_offset = 0;
+
+ ioport_resource.end = io_size - 1;
+
+ register_pci_controller(&mv_bus0_controller.pcic);
+
+ mv_io_base = io_base;
+ mv_io_size = io_size;
+}
+
+static struct resource mv_pci_io_mem1_resource = {
+ .name = "MV64340 PCI1 IO MEM",
+ .flags = IORESOURCE_IO
+};
+
+static struct resource mv_pci_mem1_resource = {
+ .name = "MV64340 PCI1 MEM",
+ .flags = IORESOURCE_MEM
+};
+
+static struct mv_pci_controller mv_bus1_controller = {
+ .pcic = {
+ .pci_ops = &mv_pci_ops,
+ .mem_resource = &mv_pci_mem1_resource,
+ .io_resource = &mv_pci_io_mem1_resource,
+ },
+ .config_addr = MV64340_PCI_1_CONFIG_ADDR,
+ .config_vreg = MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG,
+};
+
+static __init void ja_pci1_init(void)
+{
+ uint32_t mem0_base, mem0_size;
+ uint32_t io_base, io_size;
+
+ io_base = MV_READ(MV64340_PCI_1_IO_BASE_ADDR) << 16;
+ io_size = (MV_READ(MV64340_PCI_1_IO_SIZE) + 1) << 16;
+ mem0_base = MV_READ(MV64340_PCI_1_MEMORY0_BASE_ADDR) << 16;
+ mem0_size = (MV_READ(MV64340_PCI_1_MEMORY0_SIZE) + 1) << 16;
+
+ /*
+ * Here we assume the I/O window of second bus to be contiguous with
+ * the first. A gap is no problem but would waste address space for
+ * remapping the port space.
+ */
+ mv_pci_io_mem1_resource.start = mv_io_size;
+ mv_pci_io_mem1_resource.end = mv_io_size + io_size - 1;
+ mv_pci_mem1_resource.start = mem0_base;
+ mv_pci_mem1_resource.end = mem0_base + mem0_size - 1;
+ mv_bus1_controller.pcic.mem_offset = mem0_base;
+ mv_bus1_controller.pcic.io_offset = 0;
+
+ ioport_resource.end = io_base + io_size -mv_io_base - 1;
+
+ register_pci_controller(&mv_bus1_controller.pcic);
+
+ mv_io_size = io_base + io_size - mv_io_base;
+}
+
+static __init int __init ja_pci_init(void)
+{
+ unsigned long io_v_base;
+ uint32_t enable;
+
+ enable = ~MV_READ(MV64340_BASE_ADDR_ENABLE);
+
+ /*
+ * We require at least one enabled I/O or PCI memory window or we
+ * will ignore this PCI bus. We ignore PCI windows 1, 2 and 3.
+ */
+ if (enable & (0x01 << 9) || enable & (0x01 << 10))
+ ja_pci0_init();
+
+ if (enable & (0x01 << 14) || enable & (0x01 << 15))
+ ja_pci1_init();
+
+ if (mv_io_size) {
+ io_v_base = (unsigned long) ioremap(mv_io_base, mv_io_size);
+ if (!io_v_base)
+ panic("Could not ioremap I/O port range");
+
+ set_io_port_base(io_v_base);
+ }
+
+ return 0;
+}
+
+arch_initcall(ja_pci_init);
+
+static int __init momenco_jaguar_atx_setup(void)
+{
+ unsigned int tmpword;
+
+ board_time_init = momenco_time_init;
+
+ _machine_restart = momenco_jaguar_restart;
+ _machine_halt = momenco_jaguar_halt;
+ _machine_power_off = momenco_jaguar_power_off;
+
+ /*
+ * initrd_start = (ulong)jaguar_initrd_start;
+ * initrd_end = (ulong)jaguar_initrd_start + (ulong)jaguar_initrd_size;
+ * initrd_below_start_ok = 1;
+ */
+
+ wire_stupidity_into_tlb();
+
+ /*
+ * shut down ethernet ports, just to be sure our memory doesn't get
+ * corrupted by random ethernet traffic.
+ */
+ MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
+ MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
+ MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(2), 0xff << 8);
+ MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
+ MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
+ MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(2), 0xff << 8);
+ while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
+ while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
+ while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(2)) & 0xff);
+ while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
+ while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
+ while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(2)) & 0xff);
+ MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0),
+ MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
+ MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1),
+ MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
+ MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(2),
+ MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(2)) & ~1);
+
+ /* Turn off the Bit-Error LED */
+ JAGUAR_FPGA_WRITE(0x80, CLR);
+
+ tmpword = JAGUAR_FPGA_READ(BOARDREV);
+ if (tmpword < 26)
+ printk("Momentum Jaguar-ATX: Board Assembly Rev. %c\n",
+ 'A'+tmpword);
+ else
+ printk("Momentum Jaguar-ATX: Board Assembly Revision #0x%x\n",
+ tmpword);
+
+ tmpword = JAGUAR_FPGA_READ(FPGA_REV);
+ printk("FPGA Rev: %d.%d\n", tmpword>>4, tmpword&15);
+ tmpword = JAGUAR_FPGA_READ(RESET_STATUS);
+ printk("Reset reason: 0x%x\n", tmpword);
+ switch (tmpword) {
+ case 0x1:
+ printk(" - Power-up reset\n");
+ break;
+ case 0x2:
+ printk(" - Push-button reset\n");
+ break;
+ case 0x8:
+ printk(" - Watchdog reset\n");
+ break;
+ case 0x10:
+ printk(" - JTAG reset\n");
+ break;
+ default:
+ printk(" - Unknown reset cause\n");
+ }
+ reset_reason = tmpword;
+ JAGUAR_FPGA_WRITE(0xff, RESET_STATUS);
+
+ tmpword = JAGUAR_FPGA_READ(BOARD_STATUS);
+ printk("Board Status register: 0x%02x\n", tmpword);
+ printk(" - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent");
+ printk(" - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent");
+
+ /* 256MiB of RM9000x2 DDR */
+// add_memory_region(0x0, 0x100<<20, BOOT_MEM_RAM);
+
+ /* 128MiB of MV-64340 DDR */
+// add_memory_region(0x100<<20, 0x80<<20, BOOT_MEM_RAM);
+
+ /* XXX Memory configuration should be picked up from PMON2k */
+#ifdef CONFIG_JAGUAR_DMALOW
+ printk("Jaguar ATX DMA-low mode set\n");
+ add_memory_region(0x00000000, 0x08000000, BOOT_MEM_RAM);
+ add_memory_region(0x08000000, 0x10000000, BOOT_MEM_RAM);
+#else
+ /* 128MiB of MV-64340 DDR RAM */
+ printk("Jaguar ATX DMA-low mode is not set\n");
+ add_memory_region(0x100<<20, 0x80<<20, BOOT_MEM_RAM);
+#endif
+
+#ifdef GEMDEBUG_TRACEBUFFER
+ {
+ unsigned int tbControl;
+ tbControl =
+ 0 << 26 | /* post trigger delay 0 */
+ 0x2 << 16 | /* sequential trace mode */
+ // 0x0 << 16 | /* non-sequential trace mode */
+ // 0xf << 4 | /* watchpoints disabled */
+ 2 << 2 | /* armed */
+ 2 ; /* interrupt disabled */
+ printk ("setting tbControl = %08lx\n", tbControl);
+ write_32bit_cp0_set1_register($22, tbControl);
+ __asm__ __volatile__(".set noreorder\n\t" \
+ "nop; nop; nop; nop; nop; nop;\n\t" \
+ "nop; nop; nop; nop; nop; nop;\n\t" \
+ ".set reorder\n\t");
+
+ }
+#endif
+
+ return 0;
+}
+
+early_initcall(momenco_jaguar_atx_setup);
