docs/afl-fuzz_approach.md

# The afl-fuzz approach

AFL++ is a brute-force fuzzer coupled with an exceedingly simple but rock-solid
instrumentation-guided genetic algorithm. It uses a modified form of edge
coverage to effortlessly pick up subtle, local-scale changes to program control
flow.

Note: If you are interested in a more current up-to-date deep dive how AFL++
works then we commend this blog post:
[https://blog.ritsec.club/posts/afl-under-hood/](https://blog.ritsec.club/posts/afl-under-hood/)

Simplifying a bit, the overall algorithm can be summed up as:

1) Load user-supplied initial test cases into the queue.

2) Take the next input file from the queue.

3) Attempt to trim the test case to the smallest size that doesn't alter the
   measured behavior of the program.

4) Repeatedly mutate the file using a balanced and well-researched variety of
   traditional fuzzing strategies.

5) If any of the generated mutations resulted in a new state transition recorded
   by the instrumentation, add mutated output as a new entry in the queue.

6) Go to 2.

The discovered test cases are also periodically culled to eliminate ones that
have been obsoleted by newer, higher-coverage finds; and undergo several other
instrumentation-driven effort minimization steps.

As a side result of the fuzzing process, the tool creates a small,
self-contained corpus of interesting test cases. These are extremely useful for
seeding other, labor- or resource-intensive testing regimes - for example, for
stress-testing browsers, office applications, graphics suites, or closed-source
tools.

The fuzzer is thoroughly tested to deliver out-of-the-box performance far
superior to blind fuzzing or coverage-only tools.

## Understanding the status screen

This section provides an overview of the status screen - plus tips for
troubleshooting any warnings and red text shown in the UI.

For the general instruction manual, see [README.md](README.md).

### A note about colors

The status screen and error messages use colors to keep things readable and
attract your attention to the most important details. For example, red almost
always means "consult this doc" :-)

Unfortunately, the UI will only render correctly if your terminal is using
traditional un*x palette (white text on black background) or something close to
that.

If you are using inverse video, you may want to change your settings, say:

- For GNOME Terminal, go to `Edit > Profile` preferences, select the "colors"
  tab, and from the list of built-in schemes, choose "white on black".
- For the MacOS X Terminal app, open a new window using the "Pro" scheme via the
  `Shell > New Window` menu (or make "Pro" your default).

Alternatively, if you really like your current colors, you can edit config.h to
comment out USE_COLORS, then do `make clean all`.

We are not aware of any other simple way to make this work without causing other
side effects - sorry about that.

With that out of the way, let's talk about what's actually on the screen...

### The status bar

```
american fuzzy lop ++3.01a (default) [fast] {0}
```

The top line shows you which mode afl-fuzz is running in (normal: "american
fuzzy lop", crash exploration mode: "peruvian rabbit mode") and the version of
AFL++. Next to the version is the banner, which, if not set with -T by hand,
will either show the binary name being fuzzed, or the -M/-S main/secondary name
for parallel fuzzing. Second to last is the power schedule mode being run
(default: fast). Finally, the last item is the CPU id.

### Process timing

```
  +----------------------------------------------------+
  |        run time : 0 days, 8 hrs, 32 min, 43 sec    |
  |   last new find : 0 days, 0 hrs, 6 min, 40 sec     |
  | last uniq crash : none seen yet                    |
  |  last uniq hang : 0 days, 1 hrs, 24 min, 32 sec    |
  +----------------------------------------------------+
```

This section is fairly self-explanatory: it tells you how long the fuzzer has
been running and how much time has elapsed since its most recent finds. This is
broken down into "paths" (a shorthand for test cases that trigger new execution
patterns), crashes, and hangs.

When it comes to timing: there is no hard rule, but most fuzzing jobs should be
expected to run for days or weeks; in fact, for a moderately complex project,
the first pass will probably take a day or so. Every now and then, some jobs
will be allowed to run for months.

There's one important thing to watch out for: if the tool is not finding new
paths within several minutes of starting, you're probably not invoking the
target binary correctly and it never gets to parse the input files that are
thrown at it; other possible explanations are that the default memory limit
(`-m`) is too restrictive and the program exits after failing to allocate a
buffer very early on; or that the input files are patently invalid and always
fail a basic header check.

If there are no new paths showing up for a while, you will eventually see a big
red warning in this section, too :-)

### Overall results

```
  +-----------------------+
  |  cycles done : 0      |
  |  total paths : 2095   |
  | uniq crashes : 0      |
  |   uniq hangs : 19     |
  +-----------------------+
```

The first field in this section gives you the count of queue passes done so far
- that is, the number of times the fuzzer went over all the interesting test
  cases discovered so far, fuzzed them, and looped back to the very beginning.
  Every fuzzing session should be allowed to complete at least one cycle; and
  ideally, should run much longer than that.

As noted earlier, the first pass can take a day or longer, so sit back and
relax.

To help make the call on when to hit `Ctrl-C`, the cycle counter is color-coded.
It is shown in magenta during the first pass, progresses to yellow if new finds
are still being made in subsequent rounds, then blue when that ends - and
finally, turns green after the fuzzer hasn't been seeing any action for a longer
while.

The remaining fields in this part of the screen should be pretty obvious:
there's the number of test cases ("paths") discovered so far, and the number of
unique faults. The test cases, crashes, and hangs can be explored in real-time
by browsing the output directory, see
[#interpreting-output](#interpreting-output).

### Cycle progress

```
  +-------------------------------------+
  |  now processing : 1296 (61.86%)     |
  | paths timed out : 0 (0.00%)         |
  +-------------------------------------+
```

This box tells you how far along the fuzzer is with the current queue cycle: it
shows the ID of the test case it is currently working on, plus the number of
inputs it decided to ditch because they were persistently timing out.

The "*" suffix sometimes shown in the first line means that the currently
processed path is not "favored" (a property discussed later on).

### Map coverage

```
  +--------------------------------------+
  |    map density : 10.15% / 29.07%     |
  | count coverage : 4.03 bits/tuple     |
  +--------------------------------------+
```

The section provides some trivia about the coverage observed by the
instrumentation embedded in the target binary.

The first line in the box tells you how many branch tuples already were hit, in
proportion to how much the bitmap can hold. The number on the left describes the
current input; the one on the right is the value for the entire input corpus.

Be wary of extremes:

- Absolute numbers below 200 or so suggest one of three things: that the program
  is extremely simple; that it is not instrumented properly (e.g., due to being
  linked against a non-instrumented copy of the target library); or that it is
  bailing out prematurely on your input test cases. The fuzzer will try to mark
  this in pink, just to make you aware.
- Percentages over 70% may very rarely happen with very complex programs that
  make heavy use of template-generated code. Because high bitmap density makes
  it harder for the fuzzer to reliably discern new program states, we recommend
  recompiling the binary with `AFL_INST_RATIO=10` or so and trying again (see
  [env_variables.md](env_variables.md)). The fuzzer will flag high percentages
  in red. Chances are, you will never see that unless you're fuzzing extremely
  hairy software (say, v8, perl, ffmpeg).

The other line deals with the variability in tuple hit counts seen in the
binary. In essence, if every taken branch is always taken a fixed number of
times for all the inputs that were tried, this will read `1.00`. As we manage to
trigger other hit counts for every branch, the needle will start to move toward
`8.00` (every bit in the 8-bit map hit), but will probably never reach that
extreme.

Together, the values can be useful for comparing the coverage of several
different fuzzing jobs that rely on the same instrumented binary.

### Stage progress

```
  +-------------------------------------+
  |  now trying : interest 32/8         |
  | stage execs : 3996/34.4k (11.62%)   |
  | total execs : 27.4M                 |
  |  exec speed : 891.7/sec             |
  +-------------------------------------+
```

This part gives you an in-depth peek at what the fuzzer is actually doing right
now. It tells you about the current stage, which can be any of:

- calibration - a pre-fuzzing stage where the execution path is examined to
  detect anomalies, establish baseline execution speed, and so on. Executed very
  briefly whenever a new find is being made.
- trim L/S - another pre-fuzzing stage where the test case is trimmed to the
  shortest form that still produces the same execution path. The length (L) and
  stepover (S) are chosen in general relationship to file size.
- bitflip L/S - deterministic bit flips. There are L bits toggled at any given
  time, walking the input file with S-bit increments. The current L/S variants
  are: `1/1`, `2/1`, `4/1`, `8/8`, `16/8`, `32/8`.
- arith L/8 - deterministic arithmetics. The fuzzer tries to subtract or add
  small integers to 8-, 16-, and 32-bit values. The stepover is always 8 bits.
- interest L/8 - deterministic value overwrite. The fuzzer has a list of known
  "interesting" 8-, 16-, and 32-bit values to try. The stepover is 8 bits.
- extras - deterministic injection of dictionary terms. This can be shown as
  "user" or "auto", depending on whether the fuzzer is using a user-supplied
  dictionary (`-x`) or an auto-created one. You will also see "over" or
  "insert", depending on whether the dictionary words overwrite existing data or
  are inserted by offsetting the remaining data to accommodate their length.
- havoc - a sort-of-fixed-length cycle with stacked random tweaks. The
  operations attempted during this stage include bit flips, overwrites with
  random and "interesting" integers, block deletion, block duplication, plus
  assorted dictionary-related operations (if a dictionary is supplied in the
  first place).
- splice - a last-resort strategy that kicks in after the first full queue cycle
  with no new paths. It is equivalent to 'havoc', except that it first splices
  together two random inputs from the queue at some arbitrarily selected
  midpoint.
- sync - a stage used only when `-M` or `-S` is set (see
  [fuzzing_in_depth.md:3c) Using multiple cores](fuzzing_in_depth.md#c-using-multiple-cores)).
  No real fuzzing is involved, but the tool scans the output from other fuzzers
  and imports test cases as necessary. The first time this is done, it may take
  several minutes or so.

The remaining fields should be fairly self-evident: there's the exec count
progress indicator for the current stage, a global exec counter, and a benchmark
for the current program execution speed. This may fluctuate from one test case
to another, but the benchmark should be ideally over 500 execs/sec most of the
time - and if it stays below 100, the job will probably take very long.

The fuzzer will explicitly warn you about slow targets, too. If this happens,
see the [best_practices.md#improving-speed](best_practices.md#improving-speed)
for ideas on how to speed things up.

### Findings in depth

```
  +--------------------------------------+
  | favored paths : 879 (41.96%)         |
  |  new edges on : 423 (20.19%)         |
  | total crashes : 0 (0 unique)         |
  |  total tmouts : 24 (19 unique)       |
  +--------------------------------------+
```

This gives you several metrics that are of interest mostly to complete nerds.
The section includes the number of paths that the fuzzer likes the most based on
a minimization algorithm baked into the code (these will get considerably more
air time), and the number of test cases that actually resulted in better edge
coverage (versus just pushing the branch hit counters up). There are also
additional, more detailed counters for crashes and timeouts.

Note that the timeout counter is somewhat different from the hang counter; this
one includes all test cases that exceeded the timeout, even if they did not
exceed it by a margin sufficient to be classified as hangs.

### Fuzzing strategy yields

```
  +-----------------------------------------------------+
  |   bit flips : 57/289k, 18/289k, 18/288k             |
  |  byte flips : 0/36.2k, 4/35.7k, 7/34.6k             |
  | arithmetics : 53/2.54M, 0/537k, 0/55.2k             |
  |  known ints : 8/322k, 12/1.32M, 10/1.70M            |
  |  dictionary : 9/52k, 1/53k, 1/24k                   |
  |havoc/splice : 1903/20.0M, 0/0                       |
  |py/custom/rq : unused, 53/2.54M, unused              |
  |    trim/eff : 20.31%/9201, 17.05%                   |
  +-----------------------------------------------------+
```

This is just another nerd-targeted section keeping track of how many paths were
netted, in proportion to the number of execs attempted, for each of the fuzzing
strategies discussed earlier on. This serves to convincingly validate
assumptions about the usefulness of the various approaches taken by afl-fuzz.

The trim strategy stats in this section are a bit different than the rest. The
first number in this line shows the ratio of bytes removed from the input files;
the second one corresponds to the number of execs needed to achieve this goal.
Finally, the third number shows the proportion of bytes that, although not
possible to remove, were deemed to have no effect and were excluded from some of
the more expensive deterministic fuzzing steps.

Note that when deterministic mutation mode is off (which is the default because
it is not very efficient) the first five lines display "disabled (default,
enable with -D)".

Only what is activated will have counter shown.

### Path geometry

```
  +---------------------+
  |    levels : 5       |
  |   pending : 1570    |
  |  pend fav : 583     |
  | own finds : 0       |
  |  imported : 0       |
  | stability : 100.00% |
  +---------------------+
```

The first field in this section tracks the path depth reached through the guided
fuzzing process. In essence: the initial test cases supplied by the user are
considered "level 1". The test cases that can be derived from that through
traditional fuzzing are considered "level 2"; the ones derived by using these as
inputs to subsequent fuzzing rounds are "level 3"; and so forth. The maximum
depth is therefore a rough proxy for how much value you're getting out of the
instrumentation-guided approach taken by afl-fuzz.

The next field shows you the number of inputs that have not gone through any
fuzzing yet. The same stat is also given for "favored" entries that the fuzzer
really wants to get to in this queue cycle (the non-favored entries may have to
wait a couple of cycles to get their chance).

Next is the number of new paths found during this fuzzing section and imported
from other fuzzer instances when doing parallelized fuzzing; and the extent to
which identical inputs appear to sometimes produce variable behavior in the
tested binary.

That last bit is actually fairly interesting: it measures the consistency of
observed traces. If a program always behaves the same for the same input data,
it will earn a score of 100%. When the value is lower but still shown in purple,
the fuzzing process is unlikely to be negatively affected. If it goes into red,
you may be in trouble, since AFL++ will have difficulty discerning between
meaningful and "phantom" effects of tweaking the input file.

Now, most targets will just get a 100% score, but when you see lower figures,
there are several things to look at:

- The use of uninitialized memory in conjunction with some intrinsic sources of
  entropy in the tested binary. Harmless to AFL, but could be indicative of a
  security bug.
- Attempts to manipulate persistent resources, such as left over temporary files
  or shared memory objects. This is usually harmless, but you may want to
  double-check to make sure the program isn't bailing out prematurely. Running
  out of disk space, SHM handles, or other global resources can trigger this,
  too.
- Hitting some functionality that is actually designed to behave randomly.
  Generally harmless. For example, when fuzzing sqlite, an input like `select
  random();` will trigger a variable execution path.
- Multiple threads executing at once in semi-random order. This is harmless when
  the 'stability' metric stays over 90% or so, but can become an issue if not.
  Here's what to try:
  * Use afl-clang-fast from [instrumentation](../instrumentation/) - it uses a
    thread-local tracking model that is less prone to concurrency issues,
  * See if the target can be compiled or run without threads. Common
    `./configure` options include `--without-threads`, `--disable-pthreads`, or
    `--disable-openmp`.
  * Replace pthreads with GNU Pth (https://www.gnu.org/software/pth/), which
    allows you to use a deterministic scheduler.
- In persistent mode, minor drops in the "stability" metric can be normal,
  because not all the code behaves identically when re-entered; but major dips
  may signify that the code within `__AFL_LOOP()` is not behaving correctly on
  subsequent iterations (e.g., due to incomplete clean-up or reinitialization of
  the state) and that most of the fuzzing effort goes to waste.

The paths where variable behavior is detected are marked with a matching entry
in the `<out_dir>/queue/.state/variable_behavior/` directory, so you can look
them up easily.

### CPU load

```
  [cpu: 25%]
```

This tiny widget shows the apparent CPU utilization on the local system. It is
calculated by taking the number of processes in the "runnable" state, and then
comparing it to the number of logical cores on the system.

If the value is shown in green, you are using fewer CPU cores than available on
your system and can probably parallelize to improve performance; for tips on how
to do that, see
[fuzzing_in_depth.md:3c) Using multiple cores](fuzzing_in_depth.md#c-using-multiple-cores).

If the value is shown in red, your CPU is *possibly* oversubscribed, and running
additional fuzzers may not give you any benefits.

Of course, this benchmark is very simplistic; it tells you how many processes
are ready to run, but not how resource-hungry they may be. It also doesn't
distinguish between physical cores, logical cores, and virtualized CPUs; the
performance characteristics of each of these will differ quite a bit.

If you want a more accurate measurement, you can run the `afl-gotcpu` utility
from the command line.

## Interpreting output

See [#understanding-the-status-screen](#understanding-the-status-screen) for
information on how to interpret the displayed stats and monitor the health of
the process. Be sure to consult this file especially if any UI elements are
highlighted in red.

The fuzzing process will continue until you press Ctrl-C. At a minimum, you want
to allow the fuzzer to at least one queue cycle without any new finds, which may
take anywhere from a couple of hours to a week or so.

There are three subdirectories created within the output directory and updated
in real-time:

- queue/   - test cases for every distinctive execution path, plus all the
             starting files given by the user. This is the synthesized corpus.

             Before using this corpus for any other purposes, you can shrink
             it to a smaller size using the afl-cmin tool. The tool will find
             a smaller subset of files offering equivalent edge coverage.

- crashes/ - unique test cases that cause the tested program to receive a fatal
             signal (e.g., SIGSEGV, SIGILL, SIGABRT). The entries are grouped by
             the received signal.

- hangs/   - unique test cases that cause the tested program to time out. The
             default time limit before something is classified as a hang is the
             larger of 1 second and the value of the -t parameter. The value can
             be fine-tuned by setting AFL_HANG_TMOUT, but this is rarely
             necessary.

Crashes and hangs are considered "unique" if the associated execution paths
involve any state transitions not seen in previously-recorded faults. If a
single bug can be reached in multiple ways, there will be some count inflation
early in the process, but this should quickly taper off.

The file names for crashes and hangs are correlated with the parent,
non-faulting queue entries. This should help with debugging.

## Visualizing

If you have gnuplot installed, you can also generate some pretty graphs for any
active fuzzing task using afl-plot. For an example of how this looks like, see
[https://lcamtuf.coredump.cx/afl/plot/](https://lcamtuf.coredump.cx/afl/plot/).

You can also manually build and install afl-plot-ui, which is a helper utility
for showing the graphs generated by afl-plot in a graphical window using GTK.
You can build and install it as follows:

```shell
sudo apt install libgtk-3-0 libgtk-3-dev pkg-config
cd utils/plot_ui
make
cd ../../
sudo make install
```

To learn more about remote monitoring and metrics visualization with StatsD, see
[rpc_statsd.md](rpc_statsd.md).

### Addendum: status and plot files

For unattended operation, some of the key status screen information can be also
found in a machine-readable format in the fuzzer_stats file in the output
directory. This includes:

- `start_time`        - unix time indicating the start time of afl-fuzz
- `last_update`       - unix time corresponding to the last update of this file
- `run_time`          - run time in seconds to the last update of this file
- `fuzzer_pid`        - PID of the fuzzer process
- `cycles_done`       - queue cycles completed so far
- `cycles_wo_finds`   - number of cycles without any new paths found
- `time_wo_finds`     - longest time in seconds no new path was found
- `execs_done`        - number of execve() calls attempted
- `execs_per_sec`     - overall number of execs per second
- `corpus_count`      - total number of entries in the queue
- `corpus_favored`    - number of queue entries that are favored
- `corpus_found`      - number of entries discovered through local fuzzing
- `corpus_imported`   - number of entries imported from other instances
- `max_depth`         - number of levels in the generated data set
- `cur_item`          - currently processed entry number
- `pending_favs`      - number of favored entries still waiting to be fuzzed
- `pending_total`     - number of all entries waiting to be fuzzed
- `corpus_variable`   - number of test cases showing variable behavior
- `stability`         - percentage of bitmap bytes that behave consistently
- `bitmap_cvg`        - percentage of edge coverage found in the map so far
- `saved_crashes`     - number of unique crashes recorded
- `saved_hangs`       - number of unique hangs encountered
- `last_find`         - seconds since the last find was found
- `last_crash`        - seconds since the last crash was found
- `last_hang`         - seconds since the last hang was found
- `execs_since_crash` - execs since the last crash was found
- `exec_timeout`      - the -t command line value
- `slowest_exec_ms`   - real time of the slowest execution in ms
- `peak_rss_mb`       - max rss usage reached during fuzzing in MB
- `edges_found`       - how many edges have been found
- `var_byte_count`    - how many edges are non-deterministic
- `afl_banner`        - banner text (e.g., the target name)
- `afl_version`       - the version of AFL++ used
- `target_mode`       - default, persistent, qemu, unicorn, non-instrumented
- `command_line`      - full command line used for the fuzzing session

Most of these map directly to the UI elements discussed earlier on.

On top of that, you can also find an entry called `plot_data`, containing a
plottable history for most of these fields. If you have gnuplot installed, you
can turn this into a nice progress report with the included `afl-plot` tool.

### Addendum: automatically sending metrics with StatsD

In a CI environment or when running multiple fuzzers, it can be tedious to log
into each of them or deploy scripts to read the fuzzer statistics. Using
`AFL_STATSD` (and the other related environment variables `AFL_STATSD_HOST`,
`AFL_STATSD_PORT`, `AFL_STATSD_TAGS_FLAVOR`) you can automatically send metrics
to your favorite StatsD server. Depending on your StatsD server, you will be
able to monitor, trigger alerts, or perform actions based on these metrics
(e.g.: alert on slow exec/s for a new build, threshold of crashes, time since
last crash > X, etc.).

The selected metrics are a subset of all the metrics found in the status and in
the plot file. The list is the following: `cycle_done`, `cycles_wo_finds`,
`execs_done`,`execs_per_sec`, `corpus_count`, `corpus_favored`, `corpus_found`,
`corpus_imported`, `max_depth`, `cur_item`, `pending_favs`, `pending_total`,
`corpus_variable`, `saved_crashes`, `saved_hangs`, `total_crashes`,
`slowest_exec_ms`, `edges_found`, `var_byte_count`, `havoc_expansion`. Their
definitions can be found in the addendum above.

When using multiple fuzzer instances with StatsD, it is *strongly* recommended
to setup the flavor (`AFL_STATSD_TAGS_FLAVOR`) to match your StatsD server. This
will allow you to see individual fuzzer performance, detect bad ones, see the
progress of each strategy...